USB: cp210x: Add 8998 (KCF PRN Device) #97

sonofaforester · 2014-05-30T03:46:08Z

Adds support for the KCF Technologies PRN Device in the cp210x usb serial driver

request_irq shouldn't be called from atomic context since it might sleep, but we're calling it with a spinlock held, resulting in: [ 9.172202] BUG: sleeping function called from invalid context at kernel/mm/slub.c:926 [ 9.182989] in_atomic(): 1, irqs_disabled(): 128, pid: 1, name: swapper/0 [ 9.189762] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 3.10.40-gbc1b510b-38437-g55831d3bd9-dirty torvalds#97 [ 9.199757] [<c020c448>] (unwind_backtrace+0x0/0x11c) from [<c02097d0>] (show_stack+0x10/0x14) [ 9.208346] [<c02097d0>] (show_stack+0x10/0x14) from [<c0301d74>] (kmem_cache_alloc_trace+0x3c/0x210) [ 9.217543] [<c0301d74>] (kmem_cache_alloc_trace+0x3c/0x210) from [<c0276a48>] (request_threaded_irq+0x88/0x11c) [ 9.227702] [<c0276a48>] (request_threaded_irq+0x88/0x11c) from [<c0931ca4>] (arm_smmu_attach_dev+0x188/0x858) [ 9.237686] [<c0931ca4>] (arm_smmu_attach_dev+0x188/0x858) from [<c0212cd8>] (arm_iommu_attach_device+0x18/0xd0) [ 9.247837] [<c0212cd8>] (arm_iommu_attach_device+0x18/0xd0) from [<c093314c>] (arm_smmu_test_probe+0x68/0xd4) [ 9.257823] [<c093314c>] (arm_smmu_test_probe+0x68/0xd4) from [<c05aadd0>] (driver_probe_device+0x12c/0x330) [ 9.267629] [<c05aadd0>] (driver_probe_device+0x12c/0x330) from [<c05ab080>] (__driver_attach+0x68/0x8c) [ 9.277090] [<c05ab080>] (__driver_attach+0x68/0x8c) from [<c05a92d4>] (bus_for_each_dev+0x70/0x84) [ 9.286118] [<c05a92d4>] (bus_for_each_dev+0x70/0x84) from [<c05aa3b0>] (bus_add_driver+0x100/0x244) [ 9.295233] [<c05aa3b0>] (bus_add_driver+0x100/0x244) from [<c05ab5d0>] (driver_register+0x9c/0x124) [ 9.304347] [<c05ab5d0>] (driver_register+0x9c/0x124) from [<c0933088>] (arm_smmu_test_init+0x14/0x38) [ 9.313635] [<c0933088>] (arm_smmu_test_init+0x14/0x38) from [<c0200618>] (do_one_initcall+0xb8/0x160) [ 9.322926] [<c0200618>] (do_one_initcall+0xb8/0x160) from [<c1200b7c>] (kernel_init_freeable+0x108/0x1cc) [ 9.332564] [<c1200b7c>] (kernel_init_freeable+0x108/0x1cc) from [<c0b924b0>] (kernel_init+0xc/0xe4) [ 9.341675] [<c0b924b0>] (kernel_init+0xc/0xe4) from [<c0205e38>] (ret_from_fork+0x14/0x3c) Fix this by moving the request_irq out of the critical section. This should be okay since smmu_domain->smmu is still being protected by the critical section. Also, we still don't program the Stream Match Register until after registering our interrupt handler so we shouldn't be missing any interrupts. Cc: <[email protected]> Signed-off-by: Mitchel Humpherys <[email protected]> [will: code cleanup and fixed request_irq token parameter] Signed-off-by: Will Deacon <[email protected]>

Elizafox · 2015-01-08T14:00:30Z

Linus doesn't accept PR's on github.

…c_-and_panning Fix OdroidC1 fbdev vsync and panning

arm64: dts: enable psci in hikey

Updates for saa716x, following Olli's patches that are merged to upstream today.

Until now, the requests sent to topology server are queued to a workqueue by the generic server framework. These messages are processed by worker threads and trigger the registered callbacks. To reduce latency on uniprocessor systems, explicit rescheduling is performed using cond_resched() after MAX_RECV_MSG_COUNT(25) messages. This implementation on SMP systems leads to an subscriber refcnt error as described below: When a worker thread yields by calling cond_resched() in a SMP system, a new worker is created on another CPU to process the pending workitem. Sometimes the sleeping thread wakes up before the new thread finishes execution. This breaks the assumption on ordering and being single threaded. The fault is more frequent when MAX_RECV_MSG_COUNT is lowered. If the first thread was processing subscription create and the second thread processing close(), the close request will free the subscriber and the create request oops as follows: [31.224137] WARNING: CPU: 2 PID: 266 at include/linux/kref.h:46 tipc_subscrb_rcv_cb+0x317/0x380 [tipc] [31.228143] CPU: 2 PID: 266 Comm: kworker/u8:1 Not tainted 4.5.0+ torvalds#97 [31.228377] Workqueue: tipc_rcv tipc_recv_work [tipc] [...] [31.228377] Call Trace: [31.228377] [<ffffffff812fbb6b>] dump_stack+0x4d/0x72 [31.228377] [<ffffffff8105a311>] __warn+0xd1/0xf0 [31.228377] [<ffffffff8105a3fd>] warn_slowpath_null+0x1d/0x20 [31.228377] [<ffffffffa0098067>] tipc_subscrb_rcv_cb+0x317/0x380 [tipc] [31.228377] [<ffffffffa00a4984>] tipc_receive_from_sock+0xd4/0x130 [tipc] [31.228377] [<ffffffffa00a439b>] tipc_recv_work+0x2b/0x50 [tipc] [31.228377] [<ffffffff81071925>] process_one_work+0x145/0x3d0 [31.246554] ---[ end trace c3882c9baa05a4fd ]--- [31.248327] BUG: spinlock bad magic on CPU#2, kworker/u8:1/266 [31.249119] BUG: unable to handle kernel NULL pointer dereference at 0000000000000428 [31.249323] IP: [<ffffffff81099d0c>] spin_dump+0x5c/0xe0 [31.249323] PGD 0 [31.249323] Oops: 0000 [#1] SMP In this commit, we - rename tipc_conn_shutdown() to tipc_conn_release(). - move connection release callback execution from tipc_close_conn() to a new function tipc_sock_release(), which is executed before we free the connection. Thus we release the subscriber during connection release procedure rather than connection shutdown procedure. Signed-off-by: Parthasarathy Bhuvaragan <[email protected]> Acked-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>

This adds test cases mostly around ARG_PTR_TO_RAW_STACK to check the verifier behaviour. [...] torvalds#84 raw_stack: no skb_load_bytes OK torvalds#85 raw_stack: skb_load_bytes, no init OK torvalds#86 raw_stack: skb_load_bytes, init OK torvalds#87 raw_stack: skb_load_bytes, spilled regs around bounds OK torvalds#88 raw_stack: skb_load_bytes, spilled regs corruption OK torvalds#89 raw_stack: skb_load_bytes, spilled regs corruption 2 OK torvalds#90 raw_stack: skb_load_bytes, spilled regs + data OK torvalds#91 raw_stack: skb_load_bytes, invalid access 1 OK torvalds#92 raw_stack: skb_load_bytes, invalid access 2 OK torvalds#93 raw_stack: skb_load_bytes, invalid access 3 OK torvalds#94 raw_stack: skb_load_bytes, invalid access 4 OK torvalds#95 raw_stack: skb_load_bytes, invalid access 5 OK torvalds#96 raw_stack: skb_load_bytes, invalid access 6 OK torvalds#97 raw_stack: skb_load_bytes, large access OK Summary: 98 PASSED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: David S. Miller <[email protected]>

On 07/08/16 09:13, Petr Mladek wrote: > On Thu 2016-07-07 20:27:13, Topi Miettinen wrote: >> On 07/07/16 09:16, Petr Mladek wrote: >>> On Sun 2016-07-03 15:08:07, Topi Miettinen wrote: >>>> The attached patch would make any uses of capabilities generate audit >>>> messages. It works for simple tests as you can see from the commit >>>> message, but unfortunately the call to audit_cgroup_list() deadlocks the >>>> system when booting a full blown OS. There's no deadlock when the call >>>> is removed. >>>> >>>> I guess that in some cases, cgroup_mutex and/or css_set_lock could be >>>> already held earlier before entering audit_cgroup_list(). Holding the >>>> locks is however required by task_cgroup_from_root(). Is there any way >>>> to avoid this? For example, only print some kind of cgroup ID numbers >>>> (are there unique and stable IDs, available without locks?) for those >>>> cgroups where the task is registered in the audit message? >>> >>> I am not sure if anyone know what really happens here. I suggest to >>> enable lockdep. It might detect possible deadlock even before it >>> really happens, see Documentation/locking/lockdep-design.txt >>> >>> It can be enabled by >>> >>> CONFIG_PROVE_LOCKING=y >>> >>> It depends on >>> >>> CONFIG_DEBUG_KERNEL=y >>> >>> and maybe some more options, see lib/Kconfig.debug >> >> Thanks a lot! I caught this stack dump: >> >> starting version 230 >> [ 3.416647] ------------[ cut here ]------------ >> [ 3.417310] WARNING: CPU: 0 PID: 95 at >> /home/topi/d/linux.git/kernel/locking/lockdep.c:2871 >> lockdep_trace_alloc+0xb4/0xc0 >> [ 3.417605] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) >> [ 3.417923] Modules linked in: >> [ 3.418288] CPU: 0 PID: 95 Comm: systemd-udevd Not tainted 4.7.0-rc5+ torvalds#97 >> [ 3.418444] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), >> BIOS Debian-1.8.2-1 04/01/2014 >> [ 3.418726] 0000000000000086 000000007970f3b0 ffff88000016fb00 >> ffffffff813c9c45 >> [ 3.418993] ffff88000016fb50 0000000000000000 ffff88000016fb40 >> ffffffff81091e9b >> [ 3.419176] 00000b3705e2c798 0000000000000046 0000000000000410 >> 00000000ffffffff >> [ 3.419374] Call Trace: >> [ 3.419511] [<ffffffff813c9c45>] dump_stack+0x67/0x92 >> [ 3.419644] [<ffffffff81091e9b>] __warn+0xcb/0xf0 >> [ 3.419745] [<ffffffff81091f1f>] warn_slowpath_fmt+0x5f/0x80 >> [ 3.419868] [<ffffffff810e9a84>] lockdep_trace_alloc+0xb4/0xc0 >> [ 3.419988] [<ffffffff8120dc42>] kmem_cache_alloc_node+0x42/0x600 >> [ 3.420156] [<ffffffff8110432d>] ? debug_lockdep_rcu_enabled+0x1d/0x20 >> [ 3.420170] [<ffffffff8163183b>] __alloc_skb+0x5b/0x1d0 >> [ 3.420170] [<ffffffff81144f6b>] audit_log_start+0x29b/0x480 >> [ 3.420170] [<ffffffff810a2925>] ? __lock_task_sighand+0x95/0x270 >> [ 3.420170] [<ffffffff81145cc9>] audit_log_cap_use+0x39/0xf0 >> [ 3.420170] [<ffffffff8109cd75>] ns_capable+0x45/0x70 >> [ 3.420170] [<ffffffff8109cdb7>] capable+0x17/0x20 >> [ 3.420170] [<ffffffff812a2f50>] oom_score_adj_write+0x150/0x2f0 >> [ 3.420170] [<ffffffff81230997>] __vfs_write+0x37/0x160 >> [ 3.420170] [<ffffffff810e33b7>] ? update_fast_ctr+0x17/0x30 >> [ 3.420170] [<ffffffff810e3449>] ? percpu_down_read+0x49/0x90 >> [ 3.420170] [<ffffffff81233d47>] ? __sb_start_write+0xb7/0xf0 >> [ 3.420170] [<ffffffff81233d47>] ? __sb_start_write+0xb7/0xf0 >> [ 3.420170] [<ffffffff81231048>] vfs_write+0xb8/0x1b0 >> [ 3.420170] [<ffffffff812533c6>] ? __fget_light+0x66/0x90 >> [ 3.420170] [<ffffffff81232078>] SyS_write+0x58/0xc0 >> [ 3.420170] [<ffffffff81001f2c>] do_syscall_64+0x5c/0x300 >> [ 3.420170] [<ffffffff81849c9a>] entry_SYSCALL64_slow_path+0x25/0x25 >> [ 3.420170] ---[ end trace fb586899fb556a5e ]--- >> [ 3.447922] random: systemd-udevd urandom read with 3 bits of entropy >> available >> [ 4.014078] clocksource: Switched to clocksource tsc >> Begin: Loading essential drivers ... done. >> >> This is with qemu and the boot continues normally. With real computer, >> there's no such output and system just seems to freeze. >> >> Could it be possible that the deadlock happens because there's some IO >> towards /sys/fs/cgroup, which causes a capability check and that in turn >> causes locking problems when we try to print cgroup list? > > The above warning is printed by the code from > kernel/locking/lockdep.c:2871 > > static void __lockdep_trace_alloc(gfp_t gfp_mask, unsigned long flags) > { > [...] > /* We're only interested __GFP_FS allocations for now */ > if (!(gfp_mask & __GFP_FS)) > return; > > /* > * Oi! Can't be having __GFP_FS allocations with IRQs disabled. > */ > if (DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))) > return; > > > The backtrace shows that your new audit_log_cap_use() is called > from vfs_write(). You might try to use audit_log_start() with > GFP_NOFS instead of GFP_KERNEL. > > Note that this is rather intuitive advice. I still need to learn a lot > about memory management and kernel in general to be more sure about > a correct solution. > > Best Regards, > Petr > With the attached patch, the system boots without deadlock. Locking problems still remain: [ 3.652221] ====================================================== [ 3.652221] [ INFO: possible circular locking dependency detected ] [ 3.652221] 4.7.0-rc5+ torvalds#101 Not tainted [ 3.652221] ------------------------------------------------------- [ 3.652221] systemd/1 is trying to acquire lock: [ 3.652221] (tasklist_lock){.+.+..}, at: [<ffffffff81137ddd>] cgroup_mount+0x7ed/0xbc0 [ 3.652221] but task is already holding lock: [ 3.652221] (css_set_lock){......}, at: [<ffffffff81137c59>] cgroup_mount+0x669/0xbc0 [ 3.652221] which lock already depends on the new lock. [ 3.652221] the existing dependency chain (in reverse order) is: [ 3.652221] -> #3 (css_set_lock){......}: [ 3.652221] [<ffffffff810e92b3>] lock_acquire+0xe3/0x1c0 [ 3.652221] [<ffffffff8184e137>] _raw_spin_lock_irq+0x37/0x50 [ 3.652221] [<ffffffff811374be>] cgroup_setup_root+0x19e/0x2d0 [ 3.652221] [<ffffffff821911fc>] cgroup_init+0xec/0x41d [ 3.652221] [<ffffffff82171f68>] start_kernel+0x40c/0x465 [ 3.652221] [<ffffffff82171294>] x86_64_start_reservations+0x2f/0x31 [ 3.652221] [<ffffffff8217140e>] x86_64_start_kernel+0x178/0x18b [ 3.652221] -> #2 (cgroup_mutex){+.+...}: [ 3.652221] [<ffffffff810e92b3>] lock_acquire+0xe3/0x1c0 [ 3.652221] [<ffffffff8184af5f>] mutex_lock_nested+0x5f/0x350 [ 3.652221] [<ffffffff8113962a>] audit_cgroup_list+0x4a/0x2f0 [ 3.652221] [<ffffffff81145d19>] audit_log_cap_use+0xd9/0xf0 [ 3.652221] [<ffffffff8109cd75>] ns_capable+0x45/0x70 [ 3.652221] [<ffffffff8109cdb7>] capable+0x17/0x20 [ 3.652221] [<ffffffff812a2f00>] oom_score_adj_write+0x150/0x2f0 [ 3.652221] [<ffffffff81230947>] __vfs_write+0x37/0x160 [ 3.652221] [<ffffffff81230ff8>] vfs_write+0xb8/0x1b0 [ 3.652221] [<ffffffff81232028>] SyS_write+0x58/0xc0 [ 3.652221] [<ffffffff81001f2c>] do_syscall_64+0x5c/0x300 [ 3.652221] [<ffffffff8184ea1a>] return_from_SYSCALL_64+0x0/0x7a [ 3.652221] -> #1 (&(&sighand->siglock)->rlock){+.+...}: [ 3.652221] [<ffffffff810e92b3>] lock_acquire+0xe3/0x1c0 [ 3.652221] [<ffffffff8184dfc1>] _raw_spin_lock+0x31/0x40 [ 3.652221] [<ffffffff810901d9>] copy_process.part.34+0x10f9/0x1b40 [ 3.652221] [<ffffffff81090e23>] _do_fork+0xf3/0x6b0 [ 3.652221] [<ffffffff81091409>] kernel_thread+0x29/0x30 [ 3.652221] [<ffffffff810b71d7>] kthreadd+0x187/0x1e0 [ 3.652221] [<ffffffff8184eb7f>] ret_from_fork+0x1f/0x40 [ 3.652221] -> #0 (tasklist_lock){.+.+..}: [ 3.652221] [<ffffffff810e8dfb>] __lock_acquire+0x13cb/0x1440 [ 3.652221] [<ffffffff810e92b3>] lock_acquire+0xe3/0x1c0 [ 3.652221] [<ffffffff8184e3f4>] _raw_read_lock+0x34/0x50 [ 3.652221] [<ffffffff81137ddd>] cgroup_mount+0x7ed/0xbc0 [ 3.652221] [<ffffffff81234d98>] mount_fs+0x38/0x170 [ 3.652221] [<ffffffff8125626b>] vfs_kern_mount+0x6b/0x150 [ 3.652221] [<ffffffff81258f8c>] do_mount+0x24c/0xe30 [ 3.652221] [<ffffffff81259ea5>] SyS_mount+0x95/0xe0 [ 3.652221] [<ffffffff8184e965>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 3.652221] other info that might help us debug this: [ 3.652221] Chain exists of: tasklist_lock --> cgroup_mutex --> css_set_lock [ 3.652221] Possible unsafe locking scenario: [ 3.652221] CPU0 CPU1 [ 3.652221] ---- ---- [ 3.652221] lock(css_set_lock); [ 3.652221] lock(cgroup_mutex); [ 3.652221] lock(css_set_lock); [ 3.652221] lock(tasklist_lock); [ 3.652221] *** DEADLOCK *** [ 3.652221] 1 lock held by systemd/1: [ 3.652221] #0: (css_set_lock){......}, at: [<ffffffff81137c59>] cgroup_mount+0x669/0xbc0 [ 3.652221] stack backtrace: [ 3.652221] CPU: 0 PID: 1 Comm: systemd Not tainted 4.7.0-rc5+ torvalds#101 [ 3.652221] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 3.652221] 0000000000000086 0000000024b7c1ed ffff880006d13bb0 ffffffff813c9bf5 [ 3.652221] ffffffff829dbd20 ffffffff829cf2a0 ffff880006d13bf0 ffffffff810e60a3 [ 3.652221] ffff880006d13c30 ffff880006d067b0 ffff880006d06040 0000000000000001 [ 3.652221] Call Trace: [ 3.652221] [<ffffffff813c9bf5>] dump_stack+0x67/0x92 [ 3.652221] [<ffffffff810e60a3>] print_circular_bug+0x1e3/0x250 [ 3.652221] [<ffffffff810e8dfb>] __lock_acquire+0x13cb/0x1440 [ 3.652221] [<ffffffff81210bcd>] ? __kmalloc_track_caller+0x2bd/0x630 [ 3.652221] [<ffffffff810e92b3>] lock_acquire+0xe3/0x1c0 [ 3.652221] [<ffffffff81137ddd>] ? cgroup_mount+0x7ed/0xbc0 [ 3.652221] [<ffffffff8184e3f4>] _raw_read_lock+0x34/0x50 [ 3.652221] [<ffffffff81137ddd>] ? cgroup_mount+0x7ed/0xbc0 [ 3.652221] [<ffffffff81137ddd>] cgroup_mount+0x7ed/0xbc0 [ 3.652221] [<ffffffff810e5637>] ? lockdep_init_map+0x57/0x1f0 [ 3.652221] [<ffffffff81234d98>] mount_fs+0x38/0x170 [ 3.652221] [<ffffffff8125626b>] vfs_kern_mount+0x6b/0x150 [ 3.652221] [<ffffffff81258f8c>] do_mount+0x24c/0xe30 [ 3.652221] [<ffffffff812105bb>] ? kmem_cache_alloc_trace+0x28b/0x5e0 [ 3.652221] [<ffffffff811cc176>] ? strndup_user+0x46/0x80 [ 3.652221] [<ffffffff81259ea5>] SyS_mount+0x95/0xe0 [ 3.652221] [<ffffffff8184e965>] entry_SYSCALL_64_fastpath+0x18/0xa8 Rate limiting would not be a bad idea, there were 329 audit log entries about capability use. -Topi From b857ec7d436f6fbb8c33e8d6a16d2f16175517d8 Mon Sep 17 00:00:00 2001 From: Topi Miettinen <[email protected]> Date: Sun, 10 Jul 2016 11:45:30 +0300 Subject: [PATCH] cgroup: check options and capabilities before locking to avoid a deadlock Signed-off-by: Topi Miettinen <[email protected]>

…eckpatch-fixes WARNING: do not add new typedefs torvalds#86: FILE: arch/powerpc/include/asm/elf_util.h:35: +typedef unsigned long func_desc_t; WARNING: do not add new typedefs torvalds#90: FILE: arch/powerpc/include/asm/elf_util.h:39: +typedef struct ppc64_opd_entry func_desc_t; WARNING: Block comments use * on subsequent lines torvalds#94: FILE: arch/powerpc/include/asm/elf_util.h:43: +/* Like PPC32, we need little trampolines to do > 24-bit jumps (into + the kernel itself). But on PPC64, these need to be used for every WARNING: Block comments use a trailing */ on a separate line torvalds#95: FILE: arch/powerpc/include/asm/elf_util.h:44: + jump, actually, to reset r2 (TOC+0x8000). */ ERROR: open brace '{' following struct go on the same line torvalds#97: FILE: arch/powerpc/include/asm/elf_util.h:46: +struct ppc64_stub_entry +{ WARNING: Block comments use a trailing */ on a separate line torvalds#100: FILE: arch/powerpc/include/asm/elf_util.h:49: + * so we don't have to modify the trampoline load instruction. */ WARNING: Block comments use * on subsequent lines torvalds#110: FILE: arch/powerpc/include/asm/elf_util.h:59: +/* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this + gives the value maximum span in an instruction which uses a signed WARNING: Block comments use a trailing */ on a separate line torvalds#111: FILE: arch/powerpc/include/asm/elf_util.h:60: + offset) */ WARNING: Block comments use * on subsequent lines torvalds#132: FILE: arch/powerpc/include/asm/module.h:18: +/* Both low and high 16 bits are added as SIGNED additions, so if low + 16 bits has high bit set, high 16 bits must be adjusted. These WARNING: Block comments use a trailing */ on a separate line torvalds#133: FILE: arch/powerpc/include/asm/module.h:19: + macros do that (stolen from binutils). */ WARNING: space prohibited between function name and open parenthesis '(' torvalds#136: FILE: arch/powerpc/include/asm/module.h:22: +#define PPC_HA(v) PPC_HI ((v) + 0x8000) ERROR: Macros with complex values should be enclosed in parentheses torvalds#136: FILE: arch/powerpc/include/asm/module.h:22: +#define PPC_HA(v) PPC_HI ((v) + 0x8000) WARNING: please, no spaces at the start of a line torvalds#210: FILE: arch/powerpc/kernel/elf_util_64.c:32: + (((1 << (((other) & STO_PPC64_LOCAL_MASK) >> STO_PPC64_LOCAL_BIT)) >> 2) << 2)$ WARNING: Block comments use a trailing */ on a separate line torvalds#216: FILE: arch/powerpc/kernel/elf_util_64.c:38: + * of function and try to derive r2 from it). */ WARNING: line over 80 characters torvalds#357: FILE: arch/powerpc/kernel/elf_util_64.c:179: + value = stub_for_addr(elf_info, value, obj_name); WARNING: line over 80 characters torvalds#363: FILE: arch/powerpc/kernel/elf_util_64.c:185: + squash_toc_save_inst(strtab + sym->st_name, value); ERROR: space required before the open brace '{' torvalds#369: FILE: arch/powerpc/kernel/elf_util_64.c:191: + if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){ WARNING: line over 80 characters torvalds#560: FILE: arch/powerpc/kernel/module_64.c:341: + sechdrs[me->arch.elf_info.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); WARNING: line over 80 characters torvalds#613: FILE: arch/powerpc/kernel/module_64.c:380: + struct elf_shdr *stubs_sec = &elf_info->sechdrs[elf_info->stubs_section]; WARNING: line over 80 characters torvalds#889: FILE: arch/powerpc/kernel/module_64.c:498: + num_stubs = sechdrs[me->arch.elf_info.stubs_section].sh_size / sizeof(*entry); total: 3 errors, 17 warnings, 830 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/powerpc-factor-out-relocation-code-from-module_64c-to-elf_util_64c.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Thiago Jung Bauermann <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

There is at least one Chelsio 10Gb card which uses VPD area to store some custom blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag" and VFIO blocks access beyond that offset (since 4e1a635) which leads to the situation when the guest "cxgb3" driver fails to probe the device. The host system does not have this problem as the drives accesses the config space directly without pci_read_vpd()/... This adds a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registerted for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. Tested on: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is its VPD: 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' torvalds#14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' torvalds#25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' torvalds#13 [EC] len=16: b'110107730D2 ' torvalds#26 [SN] len=16: b'97YL102035603V ' torvalds#39 [NA] len=12: b'00145E992ED1' torvalds#48 [V0] len=6: b'175000' torvalds#51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' torvalds#63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' torvalds#71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' torvalds#83 [V7] len=2: b'1 ' torvalds#88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' torvalds#92 [VA] len=2: b'0 ' torvalds#97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' torvalds#13 [VD] len=16: b'610-0001-00 H1\x00\x00' torvalds#26 [VE] len=16: b'122310_1353 fp ' torvalds#39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag Signed-off-by: Alexey Kardashevskiy <[email protected]>

There is at least one Chelsio 10Gb card which uses VPD area to store some custom blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag" and VFIO blocks access beyond that offset (since 4e1a635) which leads to the situation when the guest "cxgb3" driver fails to probe the device. The host system does not have this problem as the drives accesses the config space directly without pci_read_vpd()/... This adds a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registerted for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. This is the controller: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is what I parsed from its vpd: === b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K' 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' 002d Large item 74 bytes; name 0x10 #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' torvalds#14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' torvalds#25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 007a Small item 1 bytes; name 0xf End Tag 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' torvalds#13 [EC] len=16: b'110107730D2 ' torvalds#26 [SN] len=16: b'97YL102035603V ' torvalds#39 [NA] len=12: b'00145E992ED1' torvalds#48 [V0] len=6: b'175000' torvalds#51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' torvalds#63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' torvalds#71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' torvalds#83 [V7] len=2: b'1 ' torvalds#88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' torvalds#92 [VA] len=2: b'0 ' torvalds#97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' torvalds#13 [VD] len=16: b'610-0001-00 H1\x00\x00' torvalds#26 [VE] len=16: b'122310_1353 fp ' torvalds#39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag 10f3 Large item 13315 bytes; name 0x62 !!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00' === Signed-off-by: Alexey Kardashevskiy <[email protected]>

There is at least one Chelsio 10Gb card which uses VPD area to store some non-standard blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag". Since 4e1a635 ("vfio/pci: Use kernel VPD access functions"), VFIO blocks access beyond that offset, which prevents the guest "cxgb3" driver from probing the device. The host system does not have this problem as its driver accesses the config space directly without pci_read_vpd(). Add a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registered for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. This is the controller: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is what I parsed from its VPD: === b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K' 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' 002d Large item 74 bytes; name 0x10 #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' torvalds#14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' torvalds#25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 007a Small item 1 bytes; name 0xf End Tag 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' torvalds#13 [EC] len=16: b'110107730D2 ' torvalds#26 [SN] len=16: b'97YL102035603V ' torvalds#39 [NA] len=12: b'00145E992ED1' torvalds#48 [V0] len=6: b'175000' torvalds#51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' torvalds#63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' torvalds#71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' torvalds#83 [V7] len=2: b'1 ' torvalds#88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' torvalds#92 [VA] len=2: b'0 ' torvalds#97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' torvalds#13 [VD] len=16: b'610-0001-00 H1\x00\x00' torvalds#26 [VE] len=16: b'122310_1353 fp ' torvalds#39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag 10f3 Large item 13315 bytes; name 0x62 !!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00' === Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>

lkl: automatic syscall threads creation

If fbdev emulation is disabled, the QXL shutdown path will try to clean a framebuffer that wasn't initialized, hitting the Oops below. The problem is that even when FBDEV_EMULATION is disabled we allocate the qfbdev strutucture, but we don't initialize it. The fix is to stop allocating the memory, since it won't be used. This allows the existing verification in the cleanup hook to do it's job preventing the oops. Now that we don't allocate the unused fbdev structure, we need to be careful when dereferencing it in the PM suspend hook. [ 24.284684] BUG: unable to handle kernel NULL pointer dereference at 00000000000002e0 [ 24.285627] IP: mutex_lock+0x18/0x30 [ 24.286049] PGD 78cdf067 [ 24.286050] PUD 7940f067 [ 24.286344] PMD 0 [ 24.286649] [ 24.287072] Oops: 0002 [#1] SMP [ 24.287422] Modules linked in: qxl [ 24.287806] CPU: 0 PID: 2328 Comm: bash Not tainted 4.10.0-rc5+ torvalds#97 [ 24.288515] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 24.289681] task: ffff88007c4c0000 task.stack: ffffc90001b58000 [ 24.290354] RIP: 0010:mutex_lock+0x18/0x30 [ 24.290812] RSP: 0018:ffffc90001b5bcb0 EFLAGS: 00010246 [ 24.291401] RAX: 0000000000000000 RBX: 00000000000002e0 RCX: 0000000000000000 [ 24.292209] RDX: ffff88007c4c0000 RSI: 0000000000000001 RDI: 00000000000002e0 [ 24.292987] RBP: ffffc90001b5bcb8 R08: fffffffffffffffe R09: 0000000000000001 [ 24.293797] R10: ffff880078d80b80 R11: 0000000000011400 R12: 0000000000000000 [ 24.294601] R13: 00000000000002e0 R14: ffffffffa0009c28 R15: 0000000000000060 [ 24.295439] FS: 00007f30e3acbb40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 24.296364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.296997] CR2: 00000000000002e0 CR3: 0000000078c7b000 CR4: 00000000000006f0 [ 24.297813] Call Trace: [ 24.298097] drm_framebuffer_cleanup+0x1f/0x70 [ 24.298612] qxl_fbdev_fini+0x68/0x90 [qxl] [ 24.299074] qxl_modeset_fini+0xd/0x30 [qxl] [ 24.299562] qxl_pci_remove+0x22/0x50 [qxl] [ 24.300025] pci_device_remove+0x34/0xb0 [ 24.300507] device_release_driver_internal+0x150/0x200 [ 24.301082] device_release_driver+0xd/0x10 [ 24.301587] unbind_store+0x108/0x150 [ 24.301993] drv_attr_store+0x20/0x30 [ 24.302402] sysfs_kf_write+0x32/0x40 [ 24.302827] kernfs_fop_write+0x108/0x190 [ 24.303269] __vfs_write+0x23/0x120 [ 24.303678] ? security_file_permission+0x36/0xb0 [ 24.304193] ? rw_verify_area+0x49/0xb0 [ 24.304636] vfs_write+0xb0/0x190 [ 24.305004] SyS_write+0x41/0xa0 [ 24.305362] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 24.305887] RIP: 0033:0x7f30e31d9620 [ 24.306285] RSP: 002b:00007ffc54b47e68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 24.307128] RAX: ffffffffffffffda RBX: 00007f30e3497600 RCX: 00007f30e31d9620 [ 24.307928] RDX: 000000000000000d RSI: 0000000000da2008 RDI: 0000000000000001 [ 24.308727] RBP: 000000000070bc60 R08: 00007f30e3498760 R09: 00007f30e3acbb40 [ 24.309504] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000001 [ 24.310295] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc54b47f34 [ 24.311095] Code: 0e 01 e9 7b fe ff ff 66 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 89 fb e8 83 e8 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <3e> 48 0f b1 13 48 85 c0 74 08 48 89 df e8 66 fd ff ff 5b 5d c3 [ 24.313182] RIP: mutex_lock+0x18/0x30 RSP: ffffc90001b5bcb0 [ 24.313811] CR2: 00000000000002e0 [ 24.314208] ---[ end trace 29669c1593cae14b ]--- Signed-off-by: Gabriel Krisman Bertazi <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>

WARNING: line over 80 characters torvalds#97: FILE: arch/powerpc/include/asm/smp.h:59: +extern int smp_send_nmi_ipi(int cpu, void (*fn)(struct pt_regs *), u64 delay_us); WARNING: line over 80 characters torvalds#119: FILE: arch/powerpc/kernel/exceptions-64s.S:1276: +#if defined(CONFIG_HARDLOCKUP_DETECTOR) && defined(CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH) ERROR: do not initialise statics to 0 torvalds#317: FILE: arch/powerpc/kernel/watchdog.c:62: +static unsigned long __wd_smp_lock = 0; WARNING: memory barrier without comment torvalds#554: FILE: arch/powerpc/kernel/watchdog.c:299: + smp_wmb(); WARNING: Prefer pr_warn(... to pr_warning(... torvalds#617: FILE: arch/powerpc/kernel/watchdog.c:362: + pr_warning("Watchdog could not be initialized"); total: 1 errors, 4 warnings, 543 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/powerpc-64s-implement-arch-specific-hardlockup-watchdog.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Nicholas Piggin <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

WARNING: line length of 108 exceeds 100 columns torvalds#97: FILE: tools/testing/selftests/vm/mremap_test.c:136: + char *start = mmap(NULL, 3 * page_size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); WARNING: Missing a blank line after declarations torvalds#98: FILE: tools/testing/selftests/vm/mremap_test.c:137: + char *start = mmap(NULL, 3 * page_size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); + munmap(start + page_size, page_size); ERROR: space required before the open parenthesis '(' torvalds#107: FILE: tools/testing/selftests/vm/mremap_test.c:146: + while(getline(&line, &len, fp) != -1) { ERROR: space required after that ',' (ctx:VxV) torvalds#108: FILE: tools/testing/selftests/vm/mremap_test.c:147: + char *first = strtok(line,"- "); ^ ERROR: space required after that ',' (ctx:VxV) torvalds#110: FILE: tools/testing/selftests/vm/mremap_test.c:149: + char *second = strtok(NULL,"- "); ^ WARNING: Missing a blank line after declarations torvalds#112: FILE: tools/testing/selftests/vm/mremap_test.c:151: + void *second_val = (void *) strtol(second, NULL, 16); + if (first_val == start && second_val == start + 3 * page_size) { total: 3 errors, 3 warnings, 113 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-add-merging-after-mremap-resize.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Jakub Matěna <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

PD#150094: driver defect clean up: torvalds#32 torvalds#86 torvalds#90 torvalds#92 torvalds#97 torvalds#101 torvalds#103 torvalds#152 torvalds#155 torvalds#157~torvalds#158 torvalds#164 torvalds#167 torvalds#169~torvalds#179 torvalds#187~torvalds#191 torvalds#193~torvalds#199 torvalds#201~torvalds#210 torvalds#212~torvalds#213 torvalds#316~torvalds#319 torvalds#385 torvalds#572 torvalds#693~torvalds#694 torvalds#696~torvalds#697 Change-Id: I9669e5c0d717ee2287faf57a271ff27692039802 Signed-off-by: Guosong Zhou <[email protected]>

ANBZ: torvalds#219 commit 92063f3 upstream. The kernel may be built with multiple LSMs, but only a subset may be enabled on the boot command line by specifying "lsm=". Not including "integrity" on the ordered LSM list may result in a NULL deref. As reported by Dmitry Vyukov: in qemu: qemu-system-x86_64 -enable-kvm -machine q35,nvdimm -cpu max,migratable=off -smp 4 -m 4G,slots=4,maxmem=16G -hda wheezy.img -kernel arch/x86/boot/bzImage -nographic -vga std -soundhw all -usb -usbdevice tablet -bt hci -bt device:keyboard -net user,host=10.0.2.10,hostfwd=tcp::10022-:22 -net nic,model=virtio-net-pci -object memory-backend-file,id=pmem1,share=off,mem-path=/dev/zero,size=64M -device nvdimm,id=nvdimm1,memdev=pmem1 -append "console=ttyS0 root=/dev/sda earlyprintk=serial rodata=n oops=panic panic_on_warn=1 panic=86400 lsm=smack numa=fake=2 nopcid dummy_hcd.num=8" -pidfile vm_pid -m 2G -cpu host But it crashes on NULL deref in integrity_inode_get during boot: Run /sbin/init as init process BUG: kernel NULL pointer dereference, address: 000000000000001c PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc2+ torvalds#97 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-44-g88ab0c15525c-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmem_cache_alloc+0x2b/0x370 mm/slub.c:2920 Code: 57 41 56 41 55 41 54 41 89 f4 55 48 89 fd 53 48 83 ec 10 44 8b 3d d9 1f 90 0b 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 <8b> 5f 1c 4cf RSP: 0000:ffffc9000032f9d8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888017fc4f00 RCX: 0000000000000000 RDX: ffff888040220000 RSI: 0000000000000c40 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff888019263627 R10: ffffffff83937cd1 R11: 0000000000000000 R12: 0000000000000c40 R13: ffff888019263538 R14: 0000000000000000 R15: 0000000000ffffff FS: 0000000000000000(0000) GS:ffff88802d180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 000000000b48e000 CR4: 0000000000750ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: integrity_inode_get+0x47/0x260 security/integrity/iint.c:105 process_measurement+0x33d/0x17e0 security/integrity/ima/ima_main.c:237 ima_bprm_check+0xde/0x210 security/integrity/ima/ima_main.c:474 security_bprm_check+0x7d/0xa0 security/security.c:845 search_binary_handler fs/exec.c:1708 [inline] exec_binprm fs/exec.c:1761 [inline] bprm_execve fs/exec.c:1830 [inline] bprm_execve+0x764/0x19a0 fs/exec.c:1792 kernel_execve+0x370/0x460 fs/exec.c:1973 try_to_run_init_process+0x14/0x4e init/main.c:1366 kernel_init+0x11d/0x1b8 init/main.c:1477 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Modules linked in: CR2: 000000000000001c ---[ end trace 22d601a500de7d79 ]--- Since LSMs and IMA may be configured at build time, but not enabled at run time, panic the system if "integrity" was not initialized before use. Reported-by: Dmitry Vyukov <[email protected]> Fixes: 79f7865 ("LSM: Introduce "lsm=" for boottime LSM selection") Cc: [email protected] Signed-off-by: Mimi Zohar <[email protected]> Signed-off-by: Tianjia Zhang <[email protected]> Reviewed-by: Shile Zhang <[email protected]> Reviewed-by: Jia Zhang <[email protected]>

nvdimm_bus_register() could be called from other modules, such as nfit, but it can only be called after the nvdimm_bus_type is registered. BUG: kernel NULL pointer dereference, address: 0000000000000098 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 117 Comm: systemd-udevd Not tainted 6.2.0-rc6-pmem+ torvalds#97 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:bus_add_device+0x58/0x150 Call Trace: <TASK> device_add+0x3ac/0x980 nvdimm_bus_register+0x16d/0x1d0 acpi_nfit_init+0xb72/0x1f90 [nfit] acpi_nfit_add+0x1d5/0x200 [nfit] acpi_device_probe+0x45/0x160 really_probe+0xce/0x390 __driver_probe_device+0x78/0x180 driver_probe_device+0x1e/0x90 __driver_attach+0xd6/0x1d0 bus_for_each_dev+0x7b/0xc0 bus_add_driver+0x1ac/0x200 driver_register+0x8f/0xf0 nfit_init+0x164/0xff0 [nfit] do_one_initcall+0x5b/0x320 do_init_module+0x4c/0x1f0 __do_sys_finit_module+0xb4/0x130 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Signed-off-by: Li Zhijian <[email protected]>

scx: Add skeleton for scx testing framework

…line_page When I did soft offline stress test, a machine was observed to crash with the following message: kernel BUG at include/linux/memcontrol.h:554! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 3837 Comm: hwpoison.sh Not tainted 6.7.0-next-20240112-00001-g8ecf3e7fb7c8-dirty torvalds#97 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:folio_memcg+0xaf/0xd0 Code: 10 5b 5d c3 cc cc cc cc 48 c7 c6 08 b1 f2 b2 48 89 ef e8 b4 c5 f8 ff 90 0f 0b 48 c7 c6 d0 b0 f2 b2 48 89 ef e8 a2 c5 f8 ff 90 <0f> 0b 48 c7 c6 08 b1 f2 b2 48 89 ef e8 90 c5 f8 ff 90 0f 0b 66 66 RSP: 0018:ffffb6c043657c98 EFLAGS: 00000296 RAX: 000000000000004b RBX: ffff932bc1d1e401 RCX: ffff933abfb5c908 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff933abfb5c900 RBP: ffffea6f04019080 R08: ffffffffb3338ce8 R09: 0000000000009ffb R10: 00000000000004dd R11: ffffffffb3308d00 R12: ffffea6f04019080 R13: ffffea6f04019080 R14: 0000000000000001 R15: ffffb6c043657da0 FS: 00007f6c60f6b740(0000) GS:ffff933abfb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559c3bc8b980 CR3: 0000000107f1c000 CR4: 00000000000006f0 Call Trace: <TASK> split_huge_page_to_list+0x4d/0x1380 try_to_split_thp_page+0x3a/0xf0 soft_offline_page+0x1ea/0x8a0 soft_offline_page_store+0x52/0x90 kernfs_fop_write_iter+0x118/0x1b0 vfs_write+0x30b/0x430 ksys_write+0x5e/0xe0 do_syscall_64+0xb0/0x1b0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7f6c60d14697 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffe9b72b8d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f6c60d14697 RDX: 000000000000000c RSI: 0000559c3bc8b980 RDI: 0000000000000001 RBP: 0000559c3bc8b980 R08: 00007f6c60dd1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007f6c60e1a780 R14: 00007f6c60e16600 R15: 00007f6c60e15a00 The problem is that page->mapping is overloaded with slab->slab_list or slabs fields now, so slab pages could be taken as non-LRU movable pages if field slabs contains PAGE_MAPPING_MOVABLE or slab_list->prev is set to LIST_POISON2. These slab pages will be treated as thp later leading to crash in split_huge_page_to_list(). Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Miaohe Lin <[email protected]> Fixes: 130d4df ("mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head") Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> Cc: Miaohe Lin <[email protected]> Cc: Naoya Horiguchi <[email protected]> Cc: Vlastimil Babka <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

The input subsystem registers LEDs with default triggers while holding the input_lock and input_register_handler() takes the input_lock this means that a triggers activate method cannot directly call input_register_handler() as the old ledtrig-input-events code is doing. The initial implementation of the input-events trigger mainly did not use the simple LED trigger mechanism because that mechanism had an issue with the initial state of a newly activated LED not matching the last led_trigger_event() call for the trigger. This issue has been fixed in commit 822c91e ("leds: trigger: Store brightness set by led_trigger_event()"). Rewrite the "input-events" trigger to use the simple LED trigger mechanism, registering a single input_handler at module_init() time and using led_trigger_event() to set the brightness for all LEDs controlled by this trigger. Compared to the old code this looses the ability for the user to configure a different brightness for the on state then LED_FULL, this is standard for simple LED triggers and since this trigger is only in for-leds-next ATM losing that functionality is not a regression. This also changes the configurability of the LED off timeout from a per LED setting to a global setting (runtime modifiable module-parameter). Switching to registering a single input_handler at module_init() time fixes the following locking issue reported by lockdep: [ 2840.220145] usb 1-1.3: new low-speed USB device number 3 using xhci_hcd [ 2840.307172] usb 1-1.3: New USB device found, idVendor=0603, idProduct=0002, bcdDevice= 2.21 [ 2840.307375] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2840.307423] usb 1-1.3: Product: USB Composite Device [ 2840.307456] usb 1-1.3: Manufacturer: SINO WEALTH [ 2840.333985] input: SINO WEALTH USB Composite Device as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0603:0002.0007/input/input19 [ 2840.386545] ====================================================== [ 2840.386549] WARNING: possible circular locking dependency detected [ 2840.386554] 6.10.0-rc1+ torvalds#97 Tainted: G C E [ 2840.386558] ------------------------------------------------------ [ 2840.386562] kworker/1:1/52 is trying to acquire lock: [ 2840.386566] ffff98fcf1629300 (&led_cdev->led_access){+.+.}-{3:3}, at: led_classdev_register_ext+0x1c6/0x380 [ 2840.386590] but task is already holding lock: [ 2840.386593] ffffffff88130cc8 (input_mutex){+.+.}-{3:3}, at: input_register_device.cold+0x47/0x150 [ 2840.386608] which lock already depends on the new lock. [ 2840.386611] the existing dependency chain (in reverse order) is: [ 2840.386615] -> #3 (input_mutex){+.+.}-{3:3}: [ 2840.386624] __mutex_lock+0x8c/0xc10 [ 2840.386634] input_register_handler+0x1c/0xf0 [ 2840.386641] 0xffffffffc142c437 [ 2840.386655] led_trigger_set+0x1e1/0x2e0 [ 2840.386661] led_trigger_register+0x170/0x1b0 [ 2840.386666] do_one_initcall+0x5e/0x3a0 [ 2840.386675] do_init_module+0x60/0x220 [ 2840.386683] __do_sys_init_module+0x15f/0x190 [ 2840.386689] do_syscall_64+0x93/0x180 [ 2840.386696] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2840.386705] -> #2 (&led_cdev->trigger_lock){+.+.}-{3:3}: [ 2840.386714] down_write+0x3b/0xd0 [ 2840.386720] led_trigger_register+0x12c/0x1b0 [ 2840.386725] rfkill_register+0xec/0x340 [rfkill] [ 2840.386739] wiphy_register+0x82a/0x930 [cfg80211] [ 2840.386907] brcmf_cfg80211_attach+0xcbd/0x1430 [brcmfmac] [ 2840.386952] brcmf_attach+0x1ba/0x4c0 [brcmfmac] [ 2840.386991] brcmf_pcie_setup+0x899/0xc70 [brcmfmac] [ 2840.387030] brcmf_fw_request_done+0x13b/0x180 [brcmfmac] [ 2840.387070] request_firmware_work_func+0x3b/0x70 [ 2840.387078] process_one_work+0x21a/0x590 [ 2840.387085] worker_thread+0x1d1/0x3e0 [ 2840.387090] kthread+0xee/0x120 [ 2840.387096] ret_from_fork+0x30/0x50 [ 2840.387105] ret_from_fork_asm+0x1a/0x30 [ 2840.387112] -> #1 (leds_list_lock){++++}-{3:3}: [ 2840.387123] down_write+0x3b/0xd0 [ 2840.387129] led_classdev_register_ext+0x29e/0x380 [ 2840.387134] 0xffffffffc0e6b74c [ 2840.387143] platform_probe+0x40/0xa0 [ 2840.387151] really_probe+0xde/0x340 [ 2840.387157] __driver_probe_device+0x78/0x110 [ 2840.387162] driver_probe_device+0x1f/0xa0 [ 2840.387168] __driver_attach+0xba/0x1c0 [ 2840.387173] bus_for_each_dev+0x6b/0xb0 [ 2840.387180] bus_add_driver+0x111/0x1f0 [ 2840.387185] driver_register+0x6e/0xc0 [ 2840.387191] do_one_initcall+0x5e/0x3a0 [ 2840.387197] do_init_module+0x60/0x220 [ 2840.387204] __do_sys_init_module+0x15f/0x190 [ 2840.387210] do_syscall_64+0x93/0x180 [ 2840.387217] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2840.387224] -> #0 (&led_cdev->led_access){+.+.}-{3:3}: [ 2840.387233] __lock_acquire+0x11c6/0x1f20 [ 2840.387239] lock_acquire+0xc8/0x2b0 [ 2840.387244] __mutex_lock+0x8c/0xc10 [ 2840.387251] led_classdev_register_ext+0x1c6/0x380 [ 2840.387256] input_leds_connect+0x139/0x260 [ 2840.387262] input_attach_handler.isra.0+0x75/0x90 [ 2840.387268] input_register_device.cold+0xa1/0x150 [ 2840.387274] hidinput_connect+0x848/0xb00 [ 2840.387280] hid_connect+0x567/0x5a0 [ 2840.387288] hid_hw_start+0x3f/0x60 [ 2840.387294] hid_device_probe+0x10d/0x190 [ 2840.387298] really_probe+0xde/0x340 [ 2840.387304] __driver_probe_device+0x78/0x110 [ 2840.387309] driver_probe_device+0x1f/0xa0 [ 2840.387314] __device_attach_driver+0x85/0x110 [ 2840.387320] bus_for_each_drv+0x78/0xc0 [ 2840.387326] __device_attach+0xb0/0x1b0 [ 2840.387332] bus_probe_device+0x94/0xb0 [ 2840.387337] device_add+0x64a/0x860 [ 2840.387343] hid_add_device+0xe5/0x240 [ 2840.387349] usbhid_probe+0x4bb/0x600 [ 2840.387356] usb_probe_interface+0xea/0x2b0 [ 2840.387363] really_probe+0xde/0x340 [ 2840.387368] __driver_probe_device+0x78/0x110 [ 2840.387373] driver_probe_device+0x1f/0xa0 [ 2840.387378] __device_attach_driver+0x85/0x110 [ 2840.387383] bus_for_each_drv+0x78/0xc0 [ 2840.387390] __device_attach+0xb0/0x1b0 [ 2840.387395] bus_probe_device+0x94/0xb0 [ 2840.387400] device_add+0x64a/0x860 [ 2840.387405] usb_set_configuration+0x5e8/0x880 [ 2840.387411] usb_generic_driver_probe+0x3e/0x60 [ 2840.387418] usb_probe_device+0x3d/0x120 [ 2840.387423] really_probe+0xde/0x340 [ 2840.387428] __driver_probe_device+0x78/0x110 [ 2840.387434] driver_probe_device+0x1f/0xa0 [ 2840.387439] __device_attach_driver+0x85/0x110 [ 2840.387444] bus_for_each_drv+0x78/0xc0 [ 2840.387451] __device_attach+0xb0/0x1b0 [ 2840.387456] bus_probe_device+0x94/0xb0 [ 2840.387461] device_add+0x64a/0x860 [ 2840.387466] usb_new_device.cold+0x141/0x38f [ 2840.387473] hub_event+0x1166/0x1980 [ 2840.387479] process_one_work+0x21a/0x590 [ 2840.387484] worker_thread+0x1d1/0x3e0 [ 2840.387488] kthread+0xee/0x120 [ 2840.387493] ret_from_fork+0x30/0x50 [ 2840.387500] ret_from_fork_asm+0x1a/0x30 [ 2840.387506] other info that might help us debug this: [ 2840.387509] Chain exists of: &led_cdev->led_access --> &led_cdev->trigger_lock --> input_mutex [ 2840.387520] Possible unsafe locking scenario: [ 2840.387523] CPU0 CPU1 [ 2840.387526] ---- ---- [ 2840.387529] lock(input_mutex); [ 2840.387534] lock(&led_cdev->trigger_lock); [ 2840.387540] lock(input_mutex); [ 2840.387545] lock(&led_cdev->led_access); [ 2840.387550] *** DEADLOCK *** [ 2840.387552] 7 locks held by kworker/1:1/52: [ 2840.387557] #0: ffff98fcc1d07148 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: process_one_work+0x4af/0x590 [ 2840.387570] #1: ffffb67e00213e60 ((work_completion)(&hub->events)){+.+.}-{0:0}, at: process_one_work+0x1d5/0x590 [ 2840.387583] #2: ffff98fcc6582190 (&dev->mutex){....}-{3:3}, at: hub_event+0x57/0x1980 [ 2840.387596] #3: ffff98fccb3c6990 (&dev->mutex){....}-{3:3}, at: __device_attach+0x26/0x1b0 [ 2840.387610] #4: ffff98fcc5260960 (&dev->mutex){....}-{3:3}, at: __device_attach+0x26/0x1b0 [ 2840.387622] #5: ffff98fce3999a20 (&dev->mutex){....}-{3:3}, at: __device_attach+0x26/0x1b0 [ 2840.387635] torvalds#6: ffffffff88130cc8 (input_mutex){+.+.}-{3:3}, at: input_register_device.cold+0x47/0x150 [ 2840.387649] stack backtrace: [ 2840.387653] CPU: 1 PID: 52 Comm: kworker/1:1 Tainted: G C E 6.10.0-rc1+ torvalds#97 [ 2840.387659] Hardware name: Xiaomi Inc Mipad2/Mipad, BIOS MIPad-P4.X64.0043.R03.1603071414 03/07/2016 [ 2840.387665] Workqueue: usb_hub_wq hub_event [ 2840.387674] Call Trace: [ 2840.387681] <TASK> [ 2840.387689] dump_stack_lvl+0x68/0x90 [ 2840.387700] check_noncircular+0x10d/0x120 [ 2840.387710] ? register_lock_class+0x38/0x480 [ 2840.387717] ? check_noncircular+0x74/0x120 [ 2840.387727] __lock_acquire+0x11c6/0x1f20 [ 2840.387736] lock_acquire+0xc8/0x2b0 [ 2840.387743] ? led_classdev_register_ext+0x1c6/0x380 [ 2840.387753] __mutex_lock+0x8c/0xc10 [ 2840.387760] ? led_classdev_register_ext+0x1c6/0x380 [ 2840.387766] ? _raw_spin_unlock_irqrestore+0x35/0x60 [ 2840.387773] ? klist_next+0x158/0x160 [ 2840.387781] ? led_classdev_register_ext+0x1c6/0x380 [ 2840.387787] ? lockdep_init_map_type+0x58/0x250 [ 2840.387796] ? led_classdev_register_ext+0x1c6/0x380 [ 2840.387802] led_classdev_register_ext+0x1c6/0x380 [ 2840.387810] ? kvasprintf+0x70/0xb0 [ 2840.387820] ? kasprintf+0x3e/0x50 [ 2840.387829] input_leds_connect+0x139/0x260 [ 2840.387838] input_attach_handler.isra.0+0x75/0x90 [ 2840.387846] input_register_device.cold+0xa1/0x150 [ 2840.387854] hidinput_connect+0x848/0xb00 [ 2840.387862] ? usbhid_start+0x45b/0x7b0 [ 2840.387870] hid_connect+0x567/0x5a0 [ 2840.387878] ? __mutex_unlock_slowpath+0x2d/0x260 [ 2840.387891] hid_hw_start+0x3f/0x60 [ 2840.387899] hid_device_probe+0x10d/0x190 [ 2840.387906] ? __pfx___device_attach_driver+0x10/0x10 [ 2840.387913] really_probe+0xde/0x340 [ 2840.387919] ? pm_runtime_barrier+0x50/0x90 [ 2840.387927] __driver_probe_device+0x78/0x110 [ 2840.387934] driver_probe_device+0x1f/0xa0 [ 2840.387941] __device_attach_driver+0x85/0x110 [ 2840.387949] bus_for_each_drv+0x78/0xc0 [ 2840.387959] __device_attach+0xb0/0x1b0 [ 2840.387967] bus_probe_device+0x94/0xb0 [ 2840.387974] device_add+0x64a/0x860 [ 2840.387982] ? __debugfs_create_file+0x14a/0x1c0 [ 2840.387993] hid_add_device+0xe5/0x240 [ 2840.388002] usbhid_probe+0x4bb/0x600 [ 2840.388013] usb_probe_interface+0xea/0x2b0 [ 2840.388021] ? __pfx___device_attach_driver+0x10/0x10 [ 2840.388028] really_probe+0xde/0x340 [ 2840.388034] ? pm_runtime_barrier+0x50/0x90 [ 2840.388040] __driver_probe_device+0x78/0x110 [ 2840.388048] driver_probe_device+0x1f/0xa0 [ 2840.388055] __device_attach_driver+0x85/0x110 [ 2840.388062] bus_for_each_drv+0x78/0xc0 [ 2840.388071] __device_attach+0xb0/0x1b0 [ 2840.388079] bus_probe_device+0x94/0xb0 [ 2840.388086] device_add+0x64a/0x860 [ 2840.388094] ? __mutex_unlock_slowpath+0x2d/0x260 [ 2840.388103] usb_set_configuration+0x5e8/0x880 [ 2840.388114] ? __pfx___device_attach_driver+0x10/0x10 [ 2840.388121] usb_generic_driver_probe+0x3e/0x60 [ 2840.388129] usb_probe_device+0x3d/0x120 [ 2840.388137] really_probe+0xde/0x340 [ 2840.388142] ? pm_runtime_barrier+0x50/0x90 [ 2840.388149] __driver_probe_device+0x78/0x110 [ 2840.388156] driver_probe_device+0x1f/0xa0 [ 2840.388163] __device_attach_driver+0x85/0x110 [ 2840.388171] bus_for_each_drv+0x78/0xc0 [ 2840.388180] __device_attach+0xb0/0x1b0 [ 2840.388188] bus_probe_device+0x94/0xb0 [ 2840.388195] device_add+0x64a/0x860 [ 2840.388202] ? lockdep_hardirqs_on+0x78/0x100 [ 2840.388210] ? _raw_spin_unlock_irqrestore+0x35/0x60 [ 2840.388219] usb_new_device.cold+0x141/0x38f [ 2840.388227] hub_event+0x1166/0x1980 [ 2840.388242] process_one_work+0x21a/0x590 [ 2840.388249] ? move_linked_works+0x70/0xa0 [ 2840.388260] worker_thread+0x1d1/0x3e0 [ 2840.388268] ? __pfx_worker_thread+0x10/0x10 [ 2840.388273] kthread+0xee/0x120 [ 2840.388279] ? __pfx_kthread+0x10/0x10 [ 2840.388287] ret_from_fork+0x30/0x50 [ 2840.388294] ? __pfx_kthread+0x10/0x10 [ 2840.388301] ret_from_fork_asm+0x1a/0x30 [ 2840.388315] </TASK> [ 2840.415630] hid-generic 0003:0603:0002.0007: input,hidraw6: USB HID v1.10 Keyboard [SINO WEALTH USB Composite Device] on usb-0000:00:14.0-1.3/input0 Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>

WARNING: nested (un)?likely() calls, IS_ERR already uses unlikely() internally torvalds#83: FILE: arch/csky/kernel/vdso.c:81: + if (unlikely(IS_ERR(vma))) { WARNING: nested (un)?likely() calls, IS_ERR already uses unlikely() internally torvalds#97: FILE: arch/csky/kernel/vdso.c:92: + if (unlikely(IS_ERR(vma))) { WARNING: nested (un)?likely() calls, IS_ERR already uses unlikely() internally torvalds#213: FILE: arch/sh/kernel/vsyscall/vsyscall.c:84: + if (unlikely(IS_ERR(vma))) total: 0 errors, 3 warnings, 249 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. ./patches/mm-remove-legacy-install_special_mapping-code.patch has style problems, please review. NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Anton Ivanov <[email protected]> Cc: Brian Cain <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Dinh Nguyen <[email protected]> Cc: Guo Ren <[email protected]> Cc: Jeff Xu <[email protected]> Cc: Johannes Berg <[email protected]> Cc: John Paul Adrian Glaubitz <[email protected]> Cc: Liam R. Howlett <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nicholas Piggin <[email protected]> Cc: Pedro Falcato <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Rich Felker <[email protected]> Cc: Rob Landley <[email protected]> Cc: Yoshinori Sato <[email protected]> Signed-off-by: Andrew Morton <[email protected]>

USB: cp210x: Add 8998 (KCF PRN Device)

2920af1

Adds support for the KCF Technologies PRN Device in the cp210x usb serial driver

apxii pushed a commit to apxii/linux that referenced this pull request May 6, 2015

Merge pull request torvalds#97 from OtherCrashOverride/fix-fbdev_vsyn…

6544606

…c_-and_panning Fix OdroidC1 fbdev vsync and panning

hzhuang1 pushed a commit to hzhuang1/linux that referenced this pull request Aug 10, 2015

Merge pull request torvalds#97 from hzhuang1/psci

59d13ab

arm64: dts: enable psci in hikey

jdenson12 pushed a commit to jdenson12/linux that referenced this pull request Sep 10, 2015

Merge pull request torvalds#97 from bas-t/fixes

ca628c8

Updates for saa716x, following Olli's patches that are merged to upstream today.

sonofaforester closed this Feb 7, 2017

laijs pushed a commit to laijs/linux that referenced this pull request Feb 13, 2017

Merge pull request torvalds#97 from opurdila/syscall_threads

520c1f2

lkl: automatic syscall threads creation

logic10492 pushed a commit to logic10492/linux-amd-zen2 that referenced this pull request Jan 18, 2024

Merge pull request torvalds#97 from sched-ext/scx_selftests

177edd6

scx: Add skeleton for scx testing framework

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

USB: cp210x: Add 8998 (KCF PRN Device) #97

USB: cp210x: Add 8998 (KCF PRN Device) #97

sonofaforester commented May 30, 2014

Elizafox commented Jan 8, 2015

USB: cp210x: Add 8998 (KCF PRN Device) #97

USB: cp210x: Add 8998 (KCF PRN Device) #97

Conversation

sonofaforester commented May 30, 2014

Elizafox commented Jan 8, 2015