graphics/php-imagick: update to 3.4.3 #16
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Sep 26, 2017
This brings PHP7.1 support. Full changelog: https://pecl.php.net/package-changelog.php?package=imagick&release=3.4.3 From mmoll in #16 Own changes: add test target. note some of it failed with PHP 7.1.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Sep 28, 2017
Changelog: 2017-09-15 Jay Berkenbilt <[email protected]> * 7.0.0: release 2017-09-12 Jay Berkenbilt <[email protected]> * Relicense qpdf under version 2.0 of the Apache License rather than version 2.0 of the Artistic License. Both are fine, but the Apache License is in more widespread use, and I like it a little better than Artistic-2.0. It is my intention that there be no change in what you can or can't do with qpdf. Versions of qpdf prior to version 7 were released under the terms of version 2.0 of the Artistic License. At your option, you may continue to consider qpdf to be licensed under those terms. Please see the manual for additional information. * Improve the error message that is issued when QPDFWriter encounters a stream that can't be decoded. In particular, mention that the stream will be copied without filtering to avoid data loss. * Add new methods to the C API to correspond to new additions to QPDFWriter: - qpdf_set_compress_streams - qpdf_set_decode_level - qpdf_set_preserve_unreferenced_objects - qpdf_set_newline_before_endstream 2017-08-25 Jay Berkenbilt <[email protected]> * Re-implement parser iteratively to avoid stack overflow on very deeply nested arrays and dictionaries. Fixes #146. * Detect infinite loop while finding additional xref tables. Fixes #149. 2017-08-22 Jay Berkenbilt <[email protected]> * 7.0.b1: release * Convert all README files to markdown. Names changed as follows: - README --> README.md - README.hardening --> README-hardening.md - README.maintainer --> README-maintainer.md - README-what-to-download.txt --> README-what-to-download.md - README-windows.txt --> README-windows.md The file README-windows-install.txt remains a text file. 2017-08-21 Jay Berkenbilt <[email protected]> * Add support for writing PCLm files. Most of the work was done by Sahil Arora <[email protected]> as part of a Google Summer of Code project in 2017. PCLm support is useful only for clients that specifically know how to create PCLm files. Support in qpdf is just for ensuring that objects are written in the correct order and for including some additional material in the output that is required by the PCLm standard. 2017-08-19 Jay Berkenbilt <[email protected]> * Remove --precheck-streams. This is enabled by default now without any efficiency cost. This feature was never released. * Update pdf-create example to illustrate use of additional image compression filters. * Add support for /RunLengthDecode and /DCTDecode: - New pipeline types Pl_RunLength and Pl_DCT - New command-line flags --compress-streams and --decode-level to replace/enhance --stream-data - New QPDFWriter::setCompressStreams and QPDFWriter::setDecodeLevel methods Please see documentation, header files, and help messages for details on these new features. 2017-08-12 Jay Berkenbilt <[email protected]> * Add QPDFObjectHandle::rotatePage to apply rotation to a page object. Add --rotate option to qpdf to specify page rotation from the command line. * Provide --verbose option that causes qpdf to print an indication of what files it is writing. * Change --single-pages to --split-pages and make it take an optional argument specifying the number of pages per file. 2017-08-11 Jay Berkenbilt <[email protected]> * Fix --newline-before-endstream to always add a newline before endstream even if the last character was already a newline. This is actually what's required by PDF/A. Fixes #133. * Handle encrypted files whose encryption parameters are too short. Fixes #96. 2017-08-10 Jay Berkenbilt <[email protected]> * Remove dependency on libpcre. * Be more forgiving of certain types of errors in the xref table that don't interfere with interpreting the table. * Remove unused "tracing" parameter from PointerHolder's (T*, bool) constructor. This change breaks source code compatibility, but since this argument to PointerHolder has not used for a long time and the presence of a boolean parameter in the primary constructor makes it too easy to use that by mistake when trying to use PointerHolder for arrays, it seems like it's finally time to take it out. If you have a compile error because of this change, please check to see whether you intended to use the (bool, T*) version of the constructor instead. If not, just remove the second parameter. 2017-08-09 Jay Berkenbilt <[email protected]> * When recovering stream length, find endobj without endstream as well as just looking for endstream. Be a little more lax about where we allow it to be found. 2017-08-05 Jay Berkenbilt <[email protected]> * Add --single-pages option to cause output to be written to a separate file for each page rather than one big file. * Process --pages options earlier so that certain inspection options, like --show-pages, can show the state after the merging operations. 2017-08-02 Jay Berkenbilt <[email protected]> * Fix off-by-one error in parsing pages options. Fixes #129. 2017-07-29 Jay Berkenbilt <[email protected]> * Support @filename and @- in the qpdf command-line tool to read command-line arguments, one per line, from the named file. @- reads from standard input. Fixes #16. * Detect when input file and output file are the same and exit to avoid overwriting and losing input file. Fixes #29. * When passing multiple inspection arguments, run --check first, and defer exit until after all the checks have been run. This makes it possible to force operations such as --show-xref to be delayed until after recovery attempts have been made. For example, if you have a file with a syntactically valid xref table that has some offsets that are incorrect, running qpdf --check --show-xref on that file will first recover the xref and the dump the recovered xref, while just running qpdf --show-xref will show the xref table as present in the file. Fixes #42. * When recovering stream length, indicate the recovered length. Fixes #44. * Add --newline-before-endstream command-line option and setNewlineBeforeEndstream method to QPDFWriter. This forces qpdf to always add a newline before the endstream keyword. It is a necessary but not sufficient condition for PDF/A compliance. Fixes #103. * Handle zlib data errors when decoding streams. Fixes #106. * Improve handling of files where the "stream" keyword is not followed by proper line terminators. Fixes #104. * Fix content stream parsing to handle cases of structures within the stream split across stream boundaries. Fixes #73. 2017-07-28 Jay Berkenbilt <[email protected]> * Add --preserve-unreferenced command-line option and setPreserveUnreferencedObjects method to QPDFWriter. This option causes QPDFWriter to write all objects from the input file to the output file regardless of whether the objects are referenced. Objects are written to the output file in numerical order from the input file. This option has no effect for linearized files. 2017-07-27 Jay Berkenbilt <[email protected]> * Add --precheck-streams command-line option and setStreamPrecheck method to QPDFWriter to tell QPDFWriter to attempt decoding a stream fully before deciding whether to filter it or not. * Recover gracefully from streams that aren't filterable because the filter parameters are invalid in the stream dictionary or the dictionary itself is invalid. * Significantly improve recoverability from invalid qpdf objects. Most conditions in basic object parsing that used to cause qpdf to exit are now warnings. There are still many more opportunities for improvements of this sort beyond just object parsing. 2017-07-26 Jay Berkenbilt <[email protected]> * Fixes to infinite loops below also fix problems reported in other issues and cover CVE-2017-11624, CVE-2017-11625, CVE-2017-11626, and CVE-2017-11627. * Don't attempt to interpret syntactic keywords (like R and endobj) found while parsing content streams. * Detect infinite loops while resolving objects. This could happen if something inside an object that had to be resolved during parsing, such as a stream length, recursively referenced the object being resolved. * CVE-2017-9208: Handle references to and appearance of object 0 as a special case. Object 0 is not allowed, and qpdf was using it internally to represent direct objects. * CVE-2017-9209: Fix infinite loop caused by attempting to reconstruct the xref table while already in the process of reconstructing the xref table. * CVE-2017-9210: Fix infinite loop caused by attempting to unparse an object for inclusion in the text of an exception.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 22, 2017
This brings PHP7.1 support. Full changelog: https://pecl.php.net/package-changelog.php?package=imagick&release=3.4.3 From mmoll in #16 Own changes: add test target. note some of it failed with PHP 7.1.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 22, 2017
Changelog: 2017-09-15 Jay Berkenbilt <[email protected]> * 7.0.0: release 2017-09-12 Jay Berkenbilt <[email protected]> * Relicense qpdf under version 2.0 of the Apache License rather than version 2.0 of the Artistic License. Both are fine, but the Apache License is in more widespread use, and I like it a little better than Artistic-2.0. It is my intention that there be no change in what you can or can't do with qpdf. Versions of qpdf prior to version 7 were released under the terms of version 2.0 of the Artistic License. At your option, you may continue to consider qpdf to be licensed under those terms. Please see the manual for additional information. * Improve the error message that is issued when QPDFWriter encounters a stream that can't be decoded. In particular, mention that the stream will be copied without filtering to avoid data loss. * Add new methods to the C API to correspond to new additions to QPDFWriter: - qpdf_set_compress_streams - qpdf_set_decode_level - qpdf_set_preserve_unreferenced_objects - qpdf_set_newline_before_endstream 2017-08-25 Jay Berkenbilt <[email protected]> * Re-implement parser iteratively to avoid stack overflow on very deeply nested arrays and dictionaries. Fixes #146. * Detect infinite loop while finding additional xref tables. Fixes #149. 2017-08-22 Jay Berkenbilt <[email protected]> * 7.0.b1: release * Convert all README files to markdown. Names changed as follows: - README --> README.md - README.hardening --> README-hardening.md - README.maintainer --> README-maintainer.md - README-what-to-download.txt --> README-what-to-download.md - README-windows.txt --> README-windows.md The file README-windows-install.txt remains a text file. 2017-08-21 Jay Berkenbilt <[email protected]> * Add support for writing PCLm files. Most of the work was done by Sahil Arora <[email protected]> as part of a Google Summer of Code project in 2017. PCLm support is useful only for clients that specifically know how to create PCLm files. Support in qpdf is just for ensuring that objects are written in the correct order and for including some additional material in the output that is required by the PCLm standard. 2017-08-19 Jay Berkenbilt <[email protected]> * Remove --precheck-streams. This is enabled by default now without any efficiency cost. This feature was never released. * Update pdf-create example to illustrate use of additional image compression filters. * Add support for /RunLengthDecode and /DCTDecode: - New pipeline types Pl_RunLength and Pl_DCT - New command-line flags --compress-streams and --decode-level to replace/enhance --stream-data - New QPDFWriter::setCompressStreams and QPDFWriter::setDecodeLevel methods Please see documentation, header files, and help messages for details on these new features. 2017-08-12 Jay Berkenbilt <[email protected]> * Add QPDFObjectHandle::rotatePage to apply rotation to a page object. Add --rotate option to qpdf to specify page rotation from the command line. * Provide --verbose option that causes qpdf to print an indication of what files it is writing. * Change --single-pages to --split-pages and make it take an optional argument specifying the number of pages per file. 2017-08-11 Jay Berkenbilt <[email protected]> * Fix --newline-before-endstream to always add a newline before endstream even if the last character was already a newline. This is actually what's required by PDF/A. Fixes #133. * Handle encrypted files whose encryption parameters are too short. Fixes #96. 2017-08-10 Jay Berkenbilt <[email protected]> * Remove dependency on libpcre. * Be more forgiving of certain types of errors in the xref table that don't interfere with interpreting the table. * Remove unused "tracing" parameter from PointerHolder's (T*, bool) constructor. This change breaks source code compatibility, but since this argument to PointerHolder has not used for a long time and the presence of a boolean parameter in the primary constructor makes it too easy to use that by mistake when trying to use PointerHolder for arrays, it seems like it's finally time to take it out. If you have a compile error because of this change, please check to see whether you intended to use the (bool, T*) version of the constructor instead. If not, just remove the second parameter. 2017-08-09 Jay Berkenbilt <[email protected]> * When recovering stream length, find endobj without endstream as well as just looking for endstream. Be a little more lax about where we allow it to be found. 2017-08-05 Jay Berkenbilt <[email protected]> * Add --single-pages option to cause output to be written to a separate file for each page rather than one big file. * Process --pages options earlier so that certain inspection options, like --show-pages, can show the state after the merging operations. 2017-08-02 Jay Berkenbilt <[email protected]> * Fix off-by-one error in parsing pages options. Fixes #129. 2017-07-29 Jay Berkenbilt <[email protected]> * Support @filename and @- in the qpdf command-line tool to read command-line arguments, one per line, from the named file. @- reads from standard input. Fixes #16. * Detect when input file and output file are the same and exit to avoid overwriting and losing input file. Fixes #29. * When passing multiple inspection arguments, run --check first, and defer exit until after all the checks have been run. This makes it possible to force operations such as --show-xref to be delayed until after recovery attempts have been made. For example, if you have a file with a syntactically valid xref table that has some offsets that are incorrect, running qpdf --check --show-xref on that file will first recover the xref and the dump the recovered xref, while just running qpdf --show-xref will show the xref table as present in the file. Fixes #42. * When recovering stream length, indicate the recovered length. Fixes #44. * Add --newline-before-endstream command-line option and setNewlineBeforeEndstream method to QPDFWriter. This forces qpdf to always add a newline before the endstream keyword. It is a necessary but not sufficient condition for PDF/A compliance. Fixes #103. * Handle zlib data errors when decoding streams. Fixes #106. * Improve handling of files where the "stream" keyword is not followed by proper line terminators. Fixes #104. * Fix content stream parsing to handle cases of structures within the stream split across stream boundaries. Fixes #73. 2017-07-28 Jay Berkenbilt <[email protected]> * Add --preserve-unreferenced command-line option and setPreserveUnreferencedObjects method to QPDFWriter. This option causes QPDFWriter to write all objects from the input file to the output file regardless of whether the objects are referenced. Objects are written to the output file in numerical order from the input file. This option has no effect for linearized files. 2017-07-27 Jay Berkenbilt <[email protected]> * Add --precheck-streams command-line option and setStreamPrecheck method to QPDFWriter to tell QPDFWriter to attempt decoding a stream fully before deciding whether to filter it or not. * Recover gracefully from streams that aren't filterable because the filter parameters are invalid in the stream dictionary or the dictionary itself is invalid. * Significantly improve recoverability from invalid qpdf objects. Most conditions in basic object parsing that used to cause qpdf to exit are now warnings. There are still many more opportunities for improvements of this sort beyond just object parsing. 2017-07-26 Jay Berkenbilt <[email protected]> * Fixes to infinite loops below also fix problems reported in other issues and cover CVE-2017-11624, CVE-2017-11625, CVE-2017-11626, and CVE-2017-11627. * Don't attempt to interpret syntactic keywords (like R and endobj) found while parsing content streams. * Detect infinite loops while resolving objects. This could happen if something inside an object that had to be resolved during parsing, such as a stream length, recursively referenced the object being resolved. * CVE-2017-9208: Handle references to and appearance of object 0 as a special case. Object 0 is not allowed, and qpdf was using it internally to represent direct objects. * CVE-2017-9209: Fix infinite loop caused by attempting to reconstruct the xref table while already in the process of reconstructing the xref table. * CVE-2017-9210: Fix infinite loop caused by attempting to unparse an object for inclusion in the text of an exception.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Feb 11, 2018
Version 1.3.1 ~~~~~~~~~~~~~ - Fix compatibility problems with Python 2.6 Version 1.3.0 ~~~~~~~~~~~~~ - Add variables() API to query defined variables - Disable Python 3.2 and enable Python 3.5 and 3.6 tests - Fix #16: handle spaces of values in .pc files correctly
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Feb 23, 2018
2018-02-07 -- 0.8.5
* Changed: The uriparser project has moved from SourceForge to GitHub:
Code + issue tracker: https://github.com/uriparser/uriparser
New website: https://uriparser.github.io/
Please update any links of yours, accordingly. Thank you!
* Fixed: Memleak in out-of-memory clean-up code
of URI normalization, related to SF.net bug #28.
Thanks to Chris Hills for the report!
* Fixed: Fix compilation of uriparse(1) on FreeBSD
Thanks to Ed Schouten for the patch!
* Fixed: Fix C90 compilation errors
Thanks to Joel Cunningham for the patches!
* Fixed: Space requirements documented for uriWindowsFilenameToUriStringA
given URI "file://server1/file1.txt" (SF.net bug #31)
Thanks to threedyd for the report!
* Fixed: Compiler warnings
Thanks to Joel Cunningham for the patches!
* Fixed: Stop exporting internal function RemoveBaseUriImpl
Thanks to Joel Cunningham for the report!
* Fixed: API documentation front page no longer empty with Doxygen 1.8.13
* Fixed: "make -C doc install" fixed for lack of .map files
* Improved: Communicate that absolutePath is always URI_FALSE for URIs
with a host in uriparse CLI tool output and Uri.h header
(GitHub #2, SF.net #30)
* Soname: 1:21:0
2015-10-12 -- 0.8.4
* Fixed: Stack overflow on parsing malformed IPv6 addresses with
more than eigtht quads. Thanks to Alexander Klink for the report!
* Soname: 1:20:0
2015-10-04 -- 0.8.3
* Fixed: uriCompareRange reported NULL pointer and range of
length zero as equal, by mistake.
Thanks to Robert Kausch and his Coverity report.
* Fixed: Use-after-free in out-of-memory code of uriMakeOwner.
Thanks to Chris Hills and his Klocwork-based report (SF.net bug #28)
* Soname: 1:19:0
2015-04-27 -- 0.8.2
* Fixed: Broken conversion from/to Windows network shares (SF.net bug #21)
Thanks to Adam Gross and Dmitry Repkin!
* Fixed: Limit uriCompareRange return values to -1/0/1 (SF.net bug #24)
As a side effect, this fixes the test suite for AArch64.
Thanks to Marcin Juszkiewicz for the patch!
* Fixed: MinGW Makefile:
LIB_DIR fixed from ../../lib leftover to ../../src (SF.net bug #27)
Thanks to Dmytro Zagashev for the report!
* Fixed: Add missing NULL checks to UriStringToFilename (SF.net bug #25)
Thanks to Jerome Custodio for the report!
* Changed: Leave inlining decisions to GCC
* Soname: 1:18:0
2014-10-20 -- 0.8.1
* Fixed: Sync URI_VER_* preprocessor defines (were at 0.7.6, SF.net bug #23)
* Fixed: Bug in internal function that may flip uriEqualsUri results around
* Added: Function uriAddBaseUriEx allowing to resolve URIs with
a scheme identical to that of the base URI to resolve against
as if the URI to resolve had no scheme specified, when flag
URI_RESOLVE_IDENTICAL_SCHEME_COMPAT is specified
(SF.net feature request #4)
* Soname: 1:17:0
2014-07-12 -- 0.8.0.1
* Fixed: ISO C90 warnings (SF.net bug #20)
* Changed: No longer ship RFC documents (to make things easier for Debian)
* Soname: 1:16:0
2013-12-20 -- 0.8.0
* Fixed: Resolution of relative URI "/" broken
Thanks to Mo McRoberts for the patch!
* Fixed: uriAddBaseUri produced uriUri objects with both host
and the absolutePath flag set (while the absolutePath flag
should only be true for URI objects without a host) when
resolving absolute URIs like "/" or "/foo/bar".
Now the absolutePath flag is set to URI_FALSE and an empty
segment is added as necessary
* Fixed: .errorCode could end up unset, previously
Thanks to Radu Hociung for the patch! (SF.net bug #16)
* Fixed: Resolve use of non-POSIX "sed -r" used when building
documentation (SF.net bug #18)
Thanks to Ryan Schmidt for reporting!
* Fixed: Build DLL with -no-undefined on Windows
Thanks to Michel Zou for the patch! (SF.net bug #19)
* Added: Command line tool "uriparse"
Thanks to Radu Hociung for coding! (SF.net feature request #3)
* Soname: 1:15:0
2013-08-24 -- 0.7.9
* Fixed: Error position ended up as NULL for some syntax errors.
Thanks to Daniel Solano Gómez for the patch! (SF.net bug #14)
* Soname: 1:14:0
2013-05-13 -- 0.7.8
* Fixed: Fix dissection of query string "q=hello&x=&y=" (SF.net bug #12)
Thanks to Marc Novakowski for reporting!
* Soname: 1:13:0
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Feb 24, 2018
Version 1.3.1 ~~~~~~~~~~~~~ - Fix compatibility problems with Python 2.6 Version 1.3.0 ~~~~~~~~~~~~~ - Add variables() API to query defined variables - Disable Python 3.2 and enable Python 3.5 and 3.6 tests - Fix #16: handle spaces of values in .pc files correctly
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Feb 24, 2018
2018-02-07 -- 0.8.5
* Changed: The uriparser project has moved from SourceForge to GitHub:
Code + issue tracker: https://github.com/uriparser/uriparser
New website: https://uriparser.github.io/
Please update any links of yours, accordingly. Thank you!
* Fixed: Memleak in out-of-memory clean-up code
of URI normalization, related to SF.net bug #28.
Thanks to Chris Hills for the report!
* Fixed: Fix compilation of uriparse(1) on FreeBSD
Thanks to Ed Schouten for the patch!
* Fixed: Fix C90 compilation errors
Thanks to Joel Cunningham for the patches!
* Fixed: Space requirements documented for uriWindowsFilenameToUriStringA
given URI "file://server1/file1.txt" (SF.net bug #31)
Thanks to threedyd for the report!
* Fixed: Compiler warnings
Thanks to Joel Cunningham for the patches!
* Fixed: Stop exporting internal function RemoveBaseUriImpl
Thanks to Joel Cunningham for the report!
* Fixed: API documentation front page no longer empty with Doxygen 1.8.13
* Fixed: "make -C doc install" fixed for lack of .map files
* Improved: Communicate that absolutePath is always URI_FALSE for URIs
with a host in uriparse CLI tool output and Uri.h header
(GitHub #2, SF.net #30)
* Soname: 1:21:0
2015-10-12 -- 0.8.4
* Fixed: Stack overflow on parsing malformed IPv6 addresses with
more than eigtht quads. Thanks to Alexander Klink for the report!
* Soname: 1:20:0
2015-10-04 -- 0.8.3
* Fixed: uriCompareRange reported NULL pointer and range of
length zero as equal, by mistake.
Thanks to Robert Kausch and his Coverity report.
* Fixed: Use-after-free in out-of-memory code of uriMakeOwner.
Thanks to Chris Hills and his Klocwork-based report (SF.net bug #28)
* Soname: 1:19:0
2015-04-27 -- 0.8.2
* Fixed: Broken conversion from/to Windows network shares (SF.net bug #21)
Thanks to Adam Gross and Dmitry Repkin!
* Fixed: Limit uriCompareRange return values to -1/0/1 (SF.net bug #24)
As a side effect, this fixes the test suite for AArch64.
Thanks to Marcin Juszkiewicz for the patch!
* Fixed: MinGW Makefile:
LIB_DIR fixed from ../../lib leftover to ../../src (SF.net bug #27)
Thanks to Dmytro Zagashev for the report!
* Fixed: Add missing NULL checks to UriStringToFilename (SF.net bug #25)
Thanks to Jerome Custodio for the report!
* Changed: Leave inlining decisions to GCC
* Soname: 1:18:0
2014-10-20 -- 0.8.1
* Fixed: Sync URI_VER_* preprocessor defines (were at 0.7.6, SF.net bug #23)
* Fixed: Bug in internal function that may flip uriEqualsUri results around
* Added: Function uriAddBaseUriEx allowing to resolve URIs with
a scheme identical to that of the base URI to resolve against
as if the URI to resolve had no scheme specified, when flag
URI_RESOLVE_IDENTICAL_SCHEME_COMPAT is specified
(SF.net feature request #4)
* Soname: 1:17:0
2014-07-12 -- 0.8.0.1
* Fixed: ISO C90 warnings (SF.net bug #20)
* Changed: No longer ship RFC documents (to make things easier for Debian)
* Soname: 1:16:0
2013-12-20 -- 0.8.0
* Fixed: Resolution of relative URI "/" broken
Thanks to Mo McRoberts for the patch!
* Fixed: uriAddBaseUri produced uriUri objects with both host
and the absolutePath flag set (while the absolutePath flag
should only be true for URI objects without a host) when
resolving absolute URIs like "/" or "/foo/bar".
Now the absolutePath flag is set to URI_FALSE and an empty
segment is added as necessary
* Fixed: .errorCode could end up unset, previously
Thanks to Radu Hociung for the patch! (SF.net bug #16)
* Fixed: Resolve use of non-POSIX "sed -r" used when building
documentation (SF.net bug #18)
Thanks to Ryan Schmidt for reporting!
* Fixed: Build DLL with -no-undefined on Windows
Thanks to Michel Zou for the patch! (SF.net bug #19)
* Added: Command line tool "uriparse"
Thanks to Radu Hociung for coding! (SF.net feature request #3)
* Soname: 1:15:0
2013-08-24 -- 0.7.9
* Fixed: Error position ended up as NULL for some syntax errors.
Thanks to Daniel Solano Gómez for the patch! (SF.net bug #14)
* Soname: 1:14:0
2013-05-13 -- 0.7.8
* Fixed: Fix dissection of query string "q=hello&x=&y=" (SF.net bug #12)
Thanks to Marc Novakowski for reporting!
* Soname: 1:13:0
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Feb 27, 2018
Changes: 1.20.1 ------ - libcupsfilters: Silenced warning when using CUPS < 2.x by eliminating the use of a recently introduced CUPS library function (Bugzilla bug #1421). - braille: Fix some missing options on indexv4. Thanks to Samuel Thibault for this patch (Pull request #21). - braille: Fix disabling margins on indexv4 in graphic mode. Thanks to Samuel Thibault for this patch (Pull request #20). - braille: Fix installation of brftopagedbrf. Thanks to Samuel Thibault for this patch (Pull request #18, Issue #17). - cups-browsed: Fixed crash when CUPS reports a print queue without "device-uri" attribute when cups-browsed polls a list of local CUPS queues (Issue #16). 1.20.0 ------ - libcupsfilters: Let the PPD generator prefer the English translation file from CUPS for the human-readable strings in the PPD files. - libcupsfilters: The PPD generator lists all page sizes with human-readable names now, including proprietary names of the printer. - cups-browsed, driverless: Fixed get-printer-attributes call on driverless printers for generating the PPD, explicitly requesting the media-col-database attribute as otherwise borderless page sizes do not appear. - libcupsfilters: Fixed loading option/choice strings lists from driverless printers for PPD file generation. Especially proprietary media types appear correctly now. - libcupsfilters: Completed color space support in the PPD generator: Added DeviceGray/RGB/CMYK, default to 8 bit for SRGB and to 16 bit for AdobeRGB, avoid duplicate listings of the same color space. 1.19.0 ------ - libcupsfilters: Let the PPD generator add the options "Print Optimization", "Print Rendering Intent" and "Print Scaling" if appropriate IPP attributes are found. - libcupsfilters: Let the PPD generator read out the maximum of info about color spaces and this way not only reliably the correct choices are added to the ColorModel option but also the maximum supported bit depth (8 or 16 bit) is used. - libcupsfilters: Overtaken new features from CUPS' PPD generator: Presets, Finishing Templates, and extraction of media sizes from "media-col-database" - libcupsfilters: Improvements on header of generated PPDs: use cups-filters version number, "drvless.ppd" PCFileName, APSupplies and cupsChargeInfoURI from CUPS. - libcupsfilters: Let the PPD generator use the IPP string tables in the translation files of CUPS 2.3.x or newer (English strings only). Let all options in the PPD have human-readable option and choice names. In case of CUPS 2.2.x or older (or if the CUPS translation are missing) we fall back to internal tables. - cups-browsed: Improved debug output when checking IPP attributes of IPP printers. - .gitignore: Ignore also core files. - cups-browsed: Support use of PPD files generated by CUPS for IPP Printers. Works only if the the local queue created by cups-browsed replaces a temporary queue from CUPS. Configurable via "UseCUPSGeneratedPPDs" directive in cups-browsed.conf. 1.18.0 ------ - braille: Add support for page-ranges option. Thanks to Samuel Thibault for this patch (Pull request #12). - braille: Fix supporting docx and LO file names with spaces. Thanks to Samuel Thibault for this patch (Pull request #11). - .gitignore: Updated and cleaned up. - Build system: Make sure that "make dist" always includes all files of the repository, plus the files generated by ./autogen.sh, independent of the system configuration and the used ./configure options. - pdftoijs, pdftoopvp: Build pdftoijs and pdftoopvp only on demand (via "--enable-ijs" and "--enable-opvp" on the ./configure command line). There are actually no known printer drivers using these filters. If no one complains about the missing filters they will get completely removed. - Build system: Set default path for pdftops to /usr/bin/pdftops also for cross-compiling (Bug #1417). - cups-browsed: Set "printer-location" as an attribute and not as an option when creating/updating a CUPS queue (Bug #1413). - braille: Fix handling non-printable characters in BRF files. Thanks to Samuel Thibault for this patch. - braille: Fix printing backslashes in BRF files. Thanks to Samuel Thibault for this patch. - braille: use application/vnd.cups-brf instead of text/vnd.cups-brf. Thanks to Samuel Thibault for this patch. - braille: Make sure liblouis emits pure BRF output. Thanks to Samuel Thibault for this patch. - braille: Spaces at the head of lines were not getting embossed, because bash would eat them in the read command. IFS allows to avoid the issue. Thanks to Samuel Thibault for this patch. - gstoraster: Emit proper error message if Ghostscript is missing. Thanks to Peter De Wachter (pdewacht at gmail dot com) for the patch (Bug #1415). - braille: Old bash does not like quotes, like in '$(("123" + 0))'. Removed unneeded quotes. Thanks to Samuel Thibault for this patch. - braille: Index V5 embossers are compatible with the V4 protocol so we do not need driver changes, we just need to advertise the support. Thanks to Samuel Thibault for this patch.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Apr 23, 2018
Upstream changes:
0.43 Sat Apr 21 15:39:09 2018
- pull request #16 - strip down list of prerequisites to modules that are safe to use high on
the CPAN river (thanks karenetheridge)
0.42 Fri Apr 20 23:42:41 2018
- rt 125136 - reinstate 5.8 compat by not using // operator in the new unc test (thanks SREZIC)
- pull request #14 - Add .gitignore. (thanks jkeenan)
- pull request #13 - File::Find::Rule is used in the test suite but not named as a prequisite in Makefile.PL. (thanks jkeenan)
0.41 Thu Apr 19 15:58:12 2018
- Issue #10 and #8: fix Makefile.PL; add github metadata (thanks karenetheridge and chorny)
- Issue #11: Fix the test failure described in RT#123964 (thanks tomhukins and SREZIC)
- Issue #9: Fixes for Windows (thanks chorny)
- rt 124324 - fix v0.40 changelog date (thanks ANDK)
- rt 124151 - pathrm with force on should guard against absolute paths (thanks chorny)
- rt 124423 - have fcopy() work around File::Copy::copy() bug rt132866 (thanks DROLSKY)
- Issue #12 and rt 124166 - set umask for reliability (thanks teoric and ether)
- rt 43328 - add ULC test to verify pathmk() w/ ULC (thanks willi.weikum and LouisStrous)
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Sep 23, 2018
0.2.17 (2018-02-09) * Land #9, remove use of 'fun' keyword * Land #10, add rand_country 0.2.18 (2018-04-12) * Land #11, ranges for rand_base and rand_text_* 0.2.19 (2018-04-18) * Land #13, add text encryption / encoding wrappers 0.2.20 (2018-04-18) * Land #14, remove RC4/SHA256 support * Land #12, bump ruby deps 0.2.21 (2018-06-13) * Land #16, simplify shuffle_a implementation * Land #17, speedup to_mixed_case_array * Land #18, use single regular expression for strict case * Land #19, remove unnecessary gsub regex to remove newline * Land #21, add SHA2 digest wrappers
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Jun 17, 2019
Upstream changes: Features - add type CAA to libpyunbound (accessing libunbound from python). - Fix #17: Add python module example from Jan Janak, that is a plugin for the Unbound DNS resolver to resolve DNS records in multicast DNS [RFC 6762] via Avahi. The plugin communicates with Avahi via DBus. The comment section at the beginning of the file contains detailed documentation. - travis build file. - PR #16: XoT support, AXFR over TLS, turn it on with master: <ip>#<authname> in unbound.conf. This uses TLS to download the AXFR (or IXFR). Bug Fixes - Fix for #4233: guard use of NDEBUG, so that it can be passed in CFLAGS into configure. - Add log message, at verbosity 4, that says the query is encrypted with TLS, if that is enabled for the query. - Fix #4239: set NOTIMPL when deny-any is enabled, for RFC8482. - Fix #4240: Fix whitespace cleanup in example.conf. - Fix that tls-session-ticket-keys: "" on its own in unbound.conf disables the tls session ticker key calls into the OpenSSL API. - Fix crash if tls-servic-pem not filled in when necessary. - Fix auth-zone NSEC3 response for empty nonterminals with exact match nsec3 records. - Fix for out of bounds integers, thanks to OSTIF audit. It is in allocation debug code. - Fix for auth zone nsec3 ent fix for wildcard nodata. - Move goto label in answer_from_cache to the end of the function where it is more visible. - Fix auth-zone NSEC3 response for wildcard nodata answers, include the closest encloser in the answer. - Fix spelling error in log output for event method. - Fix to reinit event structure for accepted TCP (and TLS) sockets. - Fix to use event_assign with libevent for thread-safety. - verbose information about auth zone lookup process, also lookup start, timeout and fail. - Fix to wipe ssl ticket keys from memory with explicit_bzero, if available. - Fix that auth zone uses correct network type for sockets for SOA serial probes. This fixes that probes fail because earlier probe addresses are unreachable. - Fix that auth zone fails over to next master for timeout in tcp. - Squelch SSL read and write connection reset by peer and broken pipe messages. Verbosity 2 and higher enables them. - Update python documentation for init_standard(). - Typos. - Fix tls write event for read state change to re-call SSL_write and not resume the TLS handshake. - Better braces in if statement in TCP fastopen code. - iana portlist updated. - Scrub RRs from answer section when reusing NXDOMAIN message for subdomain answers. - For harden-below-nxdomain: do not consider a name to be non-exitent when message contains a CNAME record. - Fix wrong query name in local zone redirect answers with a CNAME, the copy of the local alias is in unpacked form. - contrib/fastrpz.patch updated for code changes, and with git diff. - Fix #29: Solaris 11.3 and missing symbols be64toh, htobe64. - Fix #30: AddressSanitizer finding in lookup3.c. This sets the hash function to use a slower but better auditable code that does not read beyond array boundaries. This makes code better security checkable, and is better for security. It is fixed to be slower, but not read outside of the array. - Fix edns-subnet locks, in error cases the lock was not unlocked. - Fix doxygen output error on readme markdown vignettes. - Squelch log messages from tcp send about connection reset by peer. They can be enabled with verbosity at higher values for diagnosing network connectivity issues. - Attempt to fix malformed tcp response. - Fix #31: swig 4.0 and python module. - Note that so-reuseport at extreme load is better turned off, otherwise queries are not distributed evenly, on Linux 4.4.x. - Fix that spoolbuf is not used to store tcp pipelined response between mesh send and callback end. - Fix double file close in tcp pipelined response code. - Fix to define _OPENBSD_SOURCE to get reallocarray on NetBSD. - Fix to guard _OPENBSD_SOURCE from redefinition. - Fix that fixes the Fix that spoolbuf is not used to store tcp pipelined response between mesh send and callback end, this fixes error cases that did not use the correct spoolbuf. - Fix that fixes the Fix that spoolbuf is not used to store tcp pipelined response between mesh send and callback end, this fixes error cases that did not use the correct spoolbuf. - Fix another spoolbuf storage code point, in prefetch.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Aug 25, 2019
Changelog:
New Libraries
Variant2: A never-valueless, strong guarantee implementation of std::variant, from Peter Dimov.
Updated Libraries
Align:
Support for any integral type in the integral versions of align_up and align_down.
Revised the implementation of aligned_allocator to no longer require a specialization for void.
Define propagate_on_container_move_assignment and is_always_equal in aligned_allocator.
Asio:
Improved performance slightly by eliminating a redundant move construction when completed handlers are dispatched.
Eliminated a compiler warning by annotating a case fall-through in the free function connect() implementation.
Fixed the is_*_buffer_sequence detection traits for user-defined sequence types.
Fixed some Windows-specific warnings about an incompatible pointer cast when obtaining the CancelIoEx entry point.
Changed to automatically set the defaults when opening a serial port on Windows.
Changed the serial port get_option() member function to be const.
Fixed a name hiding issue with the WinRT stream-oriented socket backend's shutdown function.
Applied a minor fix to the documentation for is_dynamic_buffer.
Added some support for Haiku OS.
Added wolfSSL compatability.
Changed to require C++17 or later for coroutines TS support with clang.
Fixed a doxygen generation problem in the tutorial.
Ensured example programs are correctly incorporated into the documentation.
Any:
Static initialization of the default constructed boost::any is now possible.
Fixed performance regression in assignment on a compilers without move-semantics.
Maintenance work.
Beast:
This version consists mostly of bug fixes and performance improvements.
Substantial work included for the split compilation mode, to reduce compile time when defining BOOST_BEAST_SEPARATE_COMPILATION.
We'd love to know how you or your company use Beast, consider adding an item to the Companies and Individuals Using Beast list.
See the full Release Notes for a complete list of changes.
Circular Buffer:
Correct doxygen generated reference to no longer show internal members. (Glen Fernandes)
Eliminate ubsan warning on add and sub. (Glen Fernandes)
Fix incorrect check in is_uninitialized. (Niklas Fejes)
Container:
Fixed bugs:
GitHub #47: "added alignment specification for small_vector".
GitHub #88: "Implement C++17 MoveAssignable requirements for self-move assignments".
GitHub #107: "Alignment ignored in resource_adaptor".
GitHub #109: "Get rid of integer overflow in copy_move_algo.hpp (-fsanitize=integer)".
GitHub #110: "Avoid gcc 9 deprecated copy warnings in new_allocator.hpp".
GitHub #112: "vector::resize() compilation error with msvc-10..12: data is not a member of boost::detail::aligned_storage".
GitHub #114: "Fix small_vector noexcept specification".
GitHub #116: "MSVC + boost 1.70 compilation error when windows.h is already included (detail/thread_mutex.hpp)".
GitHub #117: "flat_map/map::insert_or_assign with hint has wrong return types".
GitHub #118: "Non-unique inplace_set_difference used in in flat_tree_merge_unique and iterator invalidation in insert_unique".
GitHub #122: "Fix has_trivial_destructor_after_move".
GitHub #123: "With heterogeneous lookup, equal_range can result in a range with length greater than 1".
deque can now have options, using deque_options. The block size/bytes can be be specified.
static_vector can now have options, using static_vector_options. Alignment and throwing behaviour can be be specified.
small_vector can now have options, using small_vector_options. Alignment and growth factor can be be specified.
Context:
Add support for RISC-V LP64D
#72: Fix ABI violation on ppc64 ELFv2
#99: cleanup of stack if creating ucontext fails
Conversion:
Maintenance work.
Core:
Added functions alloc_construct, alloc_construct_n, alloc_destroy, and alloc_destroy_n in <boost/core/alloc_construct.hpp> for allocator aware and exception safe construction and destruction of objects and arrays. (Glen Fernandes)
Added constexpr functions first_scalar in <boost/core/first_scalar.hpp> for obtaining a pointer to the first scalar element of an array. Given a pointer of type T* they return a pointer of type remove_all_extents_t<T>*. (Glen Fernandes)
Added class template noinit_adaptor in <boost/core/noinit_adaptor.hpp> which is an allocator adaptor that converts any allocator into one whose construct(ptr) performs default initialization via placement new, and whose destroy(ptr) invokes the value_type destructor directly. (Glen Fernandes)
Added class template default_allocator in <boost/core/default_allocator.hpp>, which can serve as a minimal default allocator that has interface similar to C++20 std::allocator, supports configurations with disabled exceptions and does not have std as an associated namespace. The allocator uses operator new and operator delete for allocation. (Glen Fernandes)
In <boost/core/uncaught_exceptions.hpp> header, added workarounds for better compatibility with QNX SDP 7.0 when libc++/libc++abi libraries are used. (Andrey Semashev, #59)
The <boost/detail/sp_typeinfo.hpp> header is now marked as deprecated and will be removed in a future release. <boost/core/typeinfo.hpp> should be used instead. (Peter Dimov)
Dynamic Bitset:
Enabled hardware-assisted popcount on MSVC (#38).
Added support for boost::hash and std::hash (#45).
Support copy-initialization with default constructor (#48).
Endian:
Clarified requirements on the value type template parameter
Added support for float and double
Added endian_load, endian_store
Updated endian_reverse to correctly support all non-bool integral types
Moved deprecated names to the deprecated header endian.hpp
Fiber:
documentation for shared_work updated
Filesystem:
Fixed incorrect error_code returned from directory iterator increment when readdir_r is used.
For path, fixed rvalue-aware operator/ return type to return an rvalue instead of rvalue reference. This fixes leaving a dangling reference in the user's code if the result of operator/ is bound to a const reference. (#110)
Fixes for better compatibility with Windows CE. (#24)
Added minimal support for CMake. (#106)
Flyweight:
Maintenance work.
Histogram:
New features:
Support for thread-safe storages and new thread-safe accumulators
Support for compiling without exceptions/RTTI (increases performance by 10-20 %) (with Glen Fernandes)
Performance improvements for 1D and 2D histograms
boost::histogram::indexed now returns forward iterator range instead of input iterator range
boost::histogram::indexed_range::accessor is now non-copyable and acts like reference to cell value, making more algorithms from the C++ stdlib work
boost::histogram::algorithm::reduce with new slice option and option fusion
boost::histogram::algorithm::project accepts runtime indices for static histograms
Bug Fixes:
boost::histogram::algorithm::reduce also works on histograms that have some axis types without reduction support
boost::histogram::axis::traits::update now works correctly for boost::histogram::axis::variant
Other:
100 % test coverage
Reduced internal Boost dependencies
Improved documentation and examples
Guaranteed no-throw moves for all builtin axis types
Compile cleanly at higher warning levels
See changelog for more details.
IoStreams:
Fixed processing of multi-stream files (#87).
Added support for multi-threaded LZMA (#95).
Interprocess:
GitHub #85 ("warning: Implicit conversion loses integer precision").
GitHub #86 ("warning: Possible misuse of comma operator").
Intrusive:
GitHub #42: Documentation does not describe treap priority_of_value changes
GitHub #43: Fix tests with BOOST_INTRUSIVE_VARIADIC_TEMPLATES enabled
GitHub #45: Disable variadic templates for MSVC-12 to avoid ICEs
LexicalCast:
Added tests for boost::filesystem::path conversions #25.
Maintenance work, including #28.
Log:
New features:
Improved support for C++17 std::string_view in basic_formatting_ostream. The string view can now participate in character code conversion on output.
Added auto_newline formatter and stream manipulator. It can be used to ensure that formatted output always ends with a newline while avoiding duplicate newlines.
In the output stream, text file and text multi-file sink backends added support for configuring behavior with regard to appending a trailing newline to every formatted log record. Use auto_newline_mode named parameter of the backend constructor or call the set_auto_newline_mode method on the sink backend.
Note: The default behavior with regard to trailing newlines added by sink backends has changed slightly compared to the previous Boost.Log releases. The backends will now only add a trailing newline if there isn't one in the formatted log message string already. In previous releases a newline was added unconditionally.
Added support for passing arbitrary function objects in the filter and format named parameters to sink constructors and convenience functions for initializing sinks. For example, it is now possible to specify C++11 lambda functions directly in these parameters. (#63)
In the default filter and formatter factories used in filter and formatter parsers, added support for severity level attribute values of type boost::log::trivial::severity_level. For filters, the support is limited to attributes with "Severity" name.
Bug fixes:
Fixed incorrect parsing of components of the rotated file names while scanning for files in the text file sink backend. If the file name pattern ended with a placeholder (for example, a file counter), the scan_for_files method would not find files matching that pattern in the target storage, leaving them unmanaged. In particular, such files would not be deleted to free target storage. (#78)
Updated basic_formatting_ostream and basic_record_ostream to make it possible to overload stream output operators for pointers to user-defined types. User-defined operator<< overloads taking std::basic_ostream and a pointer argument should now be picked up by the compiler when the pointer is being written to one of Boost.Log streams. (#84)
See changelog for more details.
Math:
New features:
Catmull-Rom interpolator now works in C++11
Cardinal quadratic B-spline interpolation
Domain of elliptic integrals extended
sin_pi and cos_pi performance improvements
Forward-mode automatic differentiation
Vector valued barycentric rational interpolation
Ooura's method for evaluation of Fourier integrals
Bug fixes:
Multiple compatibility issues with Multiprecision fixed
Lambert-W fixed on a rare architecture
Metaparse:
New features:
In C++11 variadic template support for the following: sequence, one_of_c, one_of, repeated_one_of, repeated_one_of1, one_char_except_c, one_char_except.
Bug fixes:
BOOST_METAPARSE_STRING does not use out of range character values as template arguments.
any_of_c<> does not create empty array in C++14.
Move:
Git Issue #26: "Invalid iterator increment/decrement in the last iteration of adaptive_sort_combine_blocks".
Multi Array:
Simplify allocator support by using new alloc_construct_n and alloc_destroy_n facilities from Core. (Glen Fernandes)
Multi-index Containers:
Added variants of const_mem_fun and mem_fun for differently qualified member functions (issue #24).
Terse key specification syntax now correctly handles noexcept-specified member functions (issue #24).
Outcome:
Enhancements:
#184 As per request from Boost release managers, relocated version.hpp and revision.hpp into detail, and added the Boost licence boilerplate to the top of every source file which was missing one (I think). Also took the opportunity to run the licence restamping script over all Outcome, so copyright dates are now up to date.
#185 Add FAQ item explaining issue #185, and why we will do nothing to fix it right now.
#189 Refactored the OUTCOME_TRY implementation to use more clarified customisation points capable of accepting very foreign inputs. Removed the std::experimental::expected<T, E> specialisations, as those are no longer necessary. Fixed the documentation for the customisation points which previously claimed that they are ADL discovered, which they are not. Added a recipe describing how to add in support for foreign input types.
#183 Added a separate motivation/plug_error_code specifically for Boost.
Bug fixes:
OUTCOME_VERSION_MINOR hadn't been updated to 1.
#181 Fix issue #181 where Outcome didn't actually implement the strong swap guarantee, despite being documented as doing so.
#190 Fix issue #190 in Boost edition where unit test suite was not runnable from the Boost release distro.
#182 Fix issue #182 where trait::is_exception_ptr_available<T> was always true, thus causing much weirdness, like not printing diagnostics and trying to feed everything to make_exception_ptr().
#192 Fix issue #192 where the std::basic_outcome_failure_exception_from_error() was being defined twice for translation units which combine standalone and Boost Outcome's.
Parameter:
Upgraded keyword generation macro BOOST_PARAMETER_TEMPLATE_KEYWORD (#15).
Moved keyword generation macro BOOST_PARAMETER_NESTED_KEYWORD from Accumulators to this library (#28).
Added support for std::reference_wrapper and std::ref() (#16).
Moved boost::parameter::required, boost::parameter::optional, and boost::parameter::deduced metafunction definitions to their own header files in directory boost/parameter (#18).
Added support for Boost.Parameter-enabled function call operators (#20).
Added support for parameter category qualifiers "forward", "consume", and "move_from" (current qualifiers are "in", "out", and "in_out") (#21) (#23) based on http://www.modernescpp.com/index.php/c-core-guidelines-how-to-pass-function-parameters. Added new usage syntax BOOST_PARAMETER_NAME((object-name), namespace-name) qualifier(tag-name)) and BOOST_PARAMETER_NAME(qualifier(name)). (Existing code that uses qualifiers directly and correctly with BOOST_PARAMETER_FUNCTION and other code generation macros should remain unaffected for now, so no breaking changes.) The reason for the change in usage is to enable applying of parameter category constraints to Boost.Parameter-enabled functions and constructors invoked through argument composition. (Otherwise, it is currently possible to use argument composition to bypass parameter category constraints applied in BOOST_PARAMETER_FUNCTION et. al.)
Added support for perfect forwarding (#23) (#26), so that parameter::parameters::operator() can accept non-const rvalues. As a positive side effect, Boost.Parameter-enabled functions and constructors are no longer bound by BOOST_PARAMETER_MAX_ARITY on compilers that support perfect forwarding. User code can now check for this support by detecting the configuration macro BOOST_PARAMETER_HAS_PERFECT_FORWARDING, or manually turn off this support by defining the configuration macro BOOST_PARAMETER_DISABLE_PERFECT_FORWARDING.
Added metafunctions boost::parameter::is_argument_pack (#27), boost::parameter::are_tagged_arguments (#52), and boost::parameter::result_of::compose (#75).
Added variadic function template boost::parameter::compose() which takes in named arguments and returns them in an argument pack (#52). For compilers that do not support perfect forwarding, the configuration macro BOOST_PARAMETER_COMPOSE_MAX_ARITY determines the maximum number of arguments that boost::parameter::compose() can take in (#61).
Added code generation macros BOOST_PARAMETER_BASIC_FUNCTION_CALL_OPERATOR, BOOST_PARAMETER_BASIC_CONST_FUNCTION_CALL_OPERATOR, BOOST_PARAMETER_NO_SPEC_FUNCTION, BOOST_PARAMETER_NO_SPEC_MEMBER_FUNCTION, BOOST_PARAMETER_NO_SPEC_CONST_MEMBER_FUNCTION, BOOST_PARAMETER_NO_SPEC_FUNCTION_CALL_OPERATOR, BOOST_PARAMETER_NO_SPEC_CONST_FUNCTION_CALL_OPERATOR, BOOST_PARAMETER_NO_SPEC_CONSTRUCTOR, and BOOST_PARAMETER_NO_SPEC_NO_BASE_CONSTRUCTOR (#52).
Added support for Boost.MP11 (#47) (#66) (#70). User code can now check for this support by detecting the configuration macro BOOST_PARAMETER_CAN_USE_MP11, or manually turn off this support by defining the configuration macro BOOST_PARAMETER_DISABLE_MP11_USAGE.
Improved support for parameter-dependent return types via SFINAE (#73).
PtrContainer:
Fix a ptr_vector regression introduced in 1.66.0 (#24).
PolyCollection:
Maintenance work.
SmartPtr:
Added aliasing constructors to weak_ptr
Added weak_ptr<T>::empty()
Added enable_shared_from, shared_from, and weak_from
Stacktrace:
Fixed output of name(), source_location() and source_line() for the default constructed frame with thread sanitizer builds in C++98 mode.
Fixed output of long strings from name() and source_location() on MSVC #78.
Maintenance work.
Test:
Boost.test v3.11 see the Changes log for more details.
Breaking changes:
Boost.Test shows deprecation warnings if some very old headers as deprecated. If you encounter such warnings, please follow the indications: those headers will be removed in a future release.
New feature:
Now BOOST_TEST can be used to compare abstract types
Bug fixes and pull requests:
GitHub Issues: #209, #218
GitHub Pull Requests: #219, #224
Utility:
Implemented function template ostream_string in <boost/utility/ostream_string.hpp> to optimally write any kind of string content to an output stream. It satisfies the requirements of [ostream.formatted.reqmts]. (Glen Fernandes)
Optimized the stream output operators of basic_string_view and basic_string_ref to write directly to the rdbuf stream buffer. (Glen Fernandes)
Uuid:
Breaking change: MD5 name-based uuid generation was corrected to be identical on all endian systems. Define BOOST_UUID_COMPAT_PRE_1_71_MD5 to keep the result in a format compatible with 1.66 through 1.70. This does not affect the default name-based uuid generation which is based on SHA1. (#109)
Variant:
Fixed compilation of boost::apply_visitor with variants passed by non const reference in #68. Many thanks to Ed Catmur for providing the fix.
Added support for std::hash (#49). Macro BOOST_VARIANT_DO_NOT_SPECIALIZE_STD_HASH could be defined to avoid those specializations.
Added micro optimizations for binary size and performance by Nikita Kniazev in #63 and #66.
Maintenance work, including #64 by Nikita Kniazev and #67 by Hans Dembinski.
YAP:
Added an example showing how to make self-evaluating YAP expressions (that is, expressions that don't need an explicit call to evaluate() or transform()).
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Sep 11, 2019
Pkgsrc changes:
* The hosting of radsecproxy has changed to github.com.
* Add dependency on nettle.
* Update LICENSE, now only modified-bsd.
* Use gmake to build to avoid a couple of warnings.
* Relinquish exclusive maintainership.
Upstream changes:
20190704 1.8.0
New features:
- Rewrite: supplement attribute (add attribute if not present) (#19)
- Rewrite: modify vendor attribute
- Rewrite whitelist mode
- Autodetect status-server capability of servers
- Minimalistic status-server
- Explicit SubjectAltName:DNS and :IP match on certificates
Misc:
- No longer require docbook2x tools, but include plain manpages
- Fail on startup if overlapping clients with different tls blocks
Compile fixes:
- Fix compile issues on bsd
Bug fixes:
- Handle %00 in config correctly (#31)
- Fix server selection when udp were unreachable for long periods
2018-09-03 1.7.2
Misc:
- Always copy proxy-state attributes in own responses
- Authenticate own access-reject responses
- Retry outstanding requests after connection reset
Compile fixes:
- Fix compile issues on some platforms (#14)
- Fix compile issue when dtls disabled (#16)
- Fix compile issue on Cygwin (#18)
- Fix radsecproxy.conf manpage not installed when docbook2x
not available
Bug fixes:
- Fix request might be dropped if udp client uses multiple source ports
- Fix tls output might drop requests under high load
- Check for IP literals in Certificate SubjectAltName:DNS records
- Fix tls connection might hang during SSL_connect and SSL_accept
2018-07-05 1.7.1
License and copyright changes:
- Copyright SWITCH
- 3-clause BSD license only, no GPL.
Enhancements:
- Support the use of OpenSSL version 1.1 and 1.0 series
(RADSECPROXY-66, RADSECPROXY-74).
- Reload TLS certificate CRLs on SIGHUP (RADSECPROXY-78).
- Make use of SO_KEEPALIVE for tcp sockets (RADSECPROXY-12).
- Optionally include the thread-id in log messages
- Allow hashing MAC addresses in the log (same as for F-Ticks)
- Log certificate subject if rejected
- Log own responses (RADSECPROXY-61)
- Allow f-ticks prefix to be configured
- radsecproxy-hash: allow MAC addresses to be passed on command line
Misc:
- libnettle is now an unconditional dependency.
- FTicks support is now on by default and not optional.
- Experimental code for dynamic discovery has been removed.
- Replace several server status bits with a single state enum.
(RADSECPROXY-71)
- Use poll instead of select to allow > 1000 concurrent connections.
- Implement locking for all SSL objects (openssl states it
is not thread-safe)
- Rework DTLS code.
Bug fixes:
- Detect the presence of docbook2x-man correctly.
- Make clang less unhappy.
- Don't use a smaller pthread stack size than what's allowed.
- Avoid a deadlock situation with dynamic servers (RADSECPROXY-73).
- Don't forget about good dynamically discovered (TLS) connections
(RADSECPROXY-69).
- Fix refcounting in error cases when loading configuration
(RADSECPROXY-42)
- Fix potential crash when rewriting malformed vendor attributes.
- Properly cleanup expired requests from server output-queue.
- Fix crash when dynamic discovered server doesn't resolve.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 10, 2019
3.34.0 3.33.92 - symbolic: send-to metaphor - symbolic: battery-missing-symbolic (sam) - symbolic: pixel perfect question mark (sam) - symbolic: mail-attachment metrics (sam) - symbolic: view-reveal, view-conceal for passwords (sam) - symbolic: keyboard (issue #41) - symbolic: folders as inode (issue 38) - symbolic: orientation icons (https://gitlab.gnome.org/GNOME/gnome-control-center/issues/535) - symbolic: touch-disabled (https://gitlab.gnome.org/GNOME/gnome-control-center/issues/487) - symbolic: weather-tornado (issue 27) - symbolic: battery level icons (issue 6) - fullcolor: colorful packages (issue 32) 3.32.0 - pretty version number 3.31.91 - symbolic: folder-download, inode-directory - symbolic: privacy, dnd, phone device icons - symbolic: new ui context for things that aren't strictly icons. Might go into gtk - symbolic: emoji category tweaks - symbolic: mail-reply, battery status (issue #6) - symbolic: action icons eg rotation - symbolic: drive icon tweaks - fullcolor: more app/mimetype/device/status to legacy - fullcolor: new style for fullcolor icons - folders, mimetypes and devices - cursors: fix a symlink mixup (mr #5) 3.31.1 - few symbolic updates - move a lot of fullcolor icons to legacy context. They will go or be updated in 2 releases. - symbolic: lists (issue #16) - fullcolor: more app, device, mimetypes to legacy
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 18, 2019
- patch-ab/patch-ac/patch-ad/patch-ae/patch-htmldoc_htmlsep.cxx removed Already merged upstream - INSTALL_MAKE_FLAGS removed from Makefile No longer required (autotools do the right things) - OpenSSL option removed OpenSSL support was dropped in version 1.8.29 Always use GnuTLS for "ssl" option ====================== # Changes in HTMLDOC v1.9.7 - Refactored the PRE rendering code to work around compiler optimization bugs (Issue #349) - Added support for links with targets (Issue #351) - Fixed a table rowspan + valign bug (Issue #360) # Changes in HTMLDOC v1.9.6 - Added support for data URIs (Issue #340) - HTMLDOC no longer includes a PDF table of contents when converting a single web page (Issue #344) - Updated the markdown support with external links, additional inline markup, and hard line breaks. - Links in markdown text no longer render with a leading space as part of the link (Issue #346) - Fixed a buffer underflow bug discovered by AddressSanitizer. - Fixed a bug in UTF-8 support (Issue #348) - PDF output now includes the base language of the input document(s) (Issue #350) - Optimized the loading of font widths (Issue #354) - Optimized PDF page resources (Issue #356) - Optimized the base memory used for font widths (Issue #357) - Added proper `­` support (Issue #361) - Title files can now be markdown. # Changes in HTMLDOC v1.9.5 - The GUI did not support EPUB output. - Empty markdown table cells were not rendered in PDF or PostScript output. - The automatically-generated title page now supports both "docnumber" and "version" metadata. - Added support for dc:subject and dc:language metadata in EPUB output from the HTML keywords and lang values. - Added support for the subject and language metadata in markdown input. - Fixed a buffer underflow bug (Issue #338) - `htmldoc --help` now reports whether HTTPS URLs are supported (Issue #339) - Fixed an issue with HTML title pages and EPUB output. # Changes in HTMLDOC v1.9.4 - Inline fixed-width text is no longer reduced in size automatically (Issue #309) - Optimized initialization of font width data (Issue #334) # Changes in HTMLDOC v1.9.3 - Fixed formatting bugs with aligned images (Issue #322, Issue #324) - Fixed support for three digit "#RGB" color values (Issue #323) - Fixed character set support for markdown metadata. - Updated libpng to v1.6.34 (Issue #326) - The makefiles did not use the CPPFLAGS value (Issue #328) # Changes in HTMLDOC v1.9.2 - Added Markdown table support. - Fixed parsing of TBODY, TFOOT, and THEAD elements in HTML files. # Changes in HTMLDOC v1.9.1 - Fixed monospace font size issue (Issue #309) - Added support for reproducible builds (Issue #310) - Added limited support for the HTML 4.0 SPAN element (Issue #311) - Added (extremely limited) UTF-8 support for input files (Issue #314) - Fixed buffer underflow for (invalid) short HTML comments (Issue #316) - Now indent PRE text, by popular request. - EPUB output now makes sure that `<element property>` is written as `<element property="property">`. - Now support both NAME and ID for table-of-contents targets. # Changes in HTMLDOC v1.9 - Added support for repeating a single header row for tables that span multiple pages (Issue #16) - Added support for embedding the current filename/URL in the header or footer (Issue #50) - Added EPUB support (Issue #301) - Added Markdown support (Issue #302) - Fixed a regression in header/footer image scaling (Issue #303) - Documentation updates (Issue #305) - Compiler fixes (Issue #304, Issue #306) - Fixed a bug when running HTMLDOC as a macOS application. - Updated the bundled libpng to v1.6.29. # Changes in HTMLDOC v1.8.30 - Updated documentation to reflect new project page on Github. - Dropped old CDE and IRIX desktop integration files. - Cleaned up the GUI and adopted new default text editors for Linux and macOS. - PAGE BREAK comments at the end of a file in web page mode would lose the first page (Issue #251) - Fixed the scaling of header/footer images to limit them to the height of the header or footer (Issue #273) - Fixed an issue with the top-level makefile not exiting with an error as needed (Issue #282) - Fixed a URL referencing bug when the same hostname but a different port was used (Issue #290) - Fixed build issue on macOS (Issue #291) - Fixed handling of indexed+alpha PNG images (Issue #295) # Changes in HTMLDOC v1.8.29 - Updated local PNG library to version 1.6.20. - Updated local JPEG library to version 9b. - Dropped support for OpenSSL. - Added configure script support for libjpeg-turbo. - Updated HTTP code to latest CUPS/ippsample sources. - Duplex PDF output incorrectly forced an even number of pages - The table of contents showed the wrong page numbers after headings containing the "_HD_OMIT_TOC" attribute. - Fixed reported build issues - The configure script's --enable-local* options did not work. # Changes in HTMLDOC v1.8.28 - Updated local zlib to version 1.2.8. - Updated local PNG library to version 1.6.8. - Updated local JPEG library to version 9. - Updated default PDF version to 1.4. - SECURITY: Fixed three buffer overflow issues when reading AFM files and parsing page sizes. - Fixed incompatibility with Fortify's version of strcpy, which does not work properly with variable-length arrays - Fixed compilation against PNG library 1.5 or later - Fixed documentation errors - Marked Zapf-Dingbats as a standard font - Fixed GPL license text in GUI - Fixed a table formatting problem when a column has multiple colspan values - Fixed parsing of HTML comments - Fixed potential out-of-bounds read in table-of-contents rendering code - Fixed handling of image URLs with ampersands in them - Fixed top/bottom margins for logo and header/footer images - Fixed image alignment bug - Fixed X11 build problem
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 18, 2019
- Switch from FLTK 1.1 to FLTK 1.3 (tested to work with FLTK 1.4 too) ====================== # Changes in HTMLDOC v1.9.7 - Refactored the PRE rendering code to work around compiler optimization bugs (Issue #349) - Added support for links with targets (Issue #351) - Fixed a table rowspan + valign bug (Issue #360) # Changes in HTMLDOC v1.9.6 - Added support for data URIs (Issue #340) - HTMLDOC no longer includes a PDF table of contents when converting a single web page (Issue #344) - Updated the markdown support with external links, additional inline markup, and hard line breaks. - Links in markdown text no longer render with a leading space as part of the link (Issue #346) - Fixed a buffer underflow bug discovered by AddressSanitizer. - Fixed a bug in UTF-8 support (Issue #348) - PDF output now includes the base language of the input document(s) (Issue #350) - Optimized the loading of font widths (Issue #354) - Optimized PDF page resources (Issue #356) - Optimized the base memory used for font widths (Issue #357) - Added proper `­` support (Issue #361) - Title files can now be markdown. # Changes in HTMLDOC v1.9.5 - The GUI did not support EPUB output. - Empty markdown table cells were not rendered in PDF or PostScript output. - The automatically-generated title page now supports both "docnumber" and "version" metadata. - Added support for dc:subject and dc:language metadata in EPUB output from the HTML keywords and lang values. - Added support for the subject and language metadata in markdown input. - Fixed a buffer underflow bug (Issue #338) - `htmldoc --help` now reports whether HTTPS URLs are supported (Issue #339) - Fixed an issue with HTML title pages and EPUB output. # Changes in HTMLDOC v1.9.4 - Inline fixed-width text is no longer reduced in size automatically (Issue #309) - Optimized initialization of font width data (Issue #334) # Changes in HTMLDOC v1.9.3 - Fixed formatting bugs with aligned images (Issue #322, Issue #324) - Fixed support for three digit "#RGB" color values (Issue #323) - Fixed character set support for markdown metadata. - Updated libpng to v1.6.34 (Issue #326) - The makefiles did not use the CPPFLAGS value (Issue #328) # Changes in HTMLDOC v1.9.2 - Added Markdown table support. - Fixed parsing of TBODY, TFOOT, and THEAD elements in HTML files. # Changes in HTMLDOC v1.9.1 - Fixed monospace font size issue (Issue #309) - Added support for reproducible builds (Issue #310) - Added limited support for the HTML 4.0 SPAN element (Issue #311) - Added (extremely limited) UTF-8 support for input files (Issue #314) - Fixed buffer underflow for (invalid) short HTML comments (Issue #316) - Now indent PRE text, by popular request. - EPUB output now makes sure that `<element property>` is written as `<element property="property">`. - Now support both NAME and ID for table-of-contents targets. # Changes in HTMLDOC v1.9 - Added support for repeating a single header row for tables that span multiple pages (Issue #16) - Added support for embedding the current filename/URL in the header or footer (Issue #50) - Added EPUB support (Issue #301) - Added Markdown support (Issue #302) - Fixed a regression in header/footer image scaling (Issue #303) - Documentation updates (Issue #305) - Compiler fixes (Issue #304, Issue #306) - Fixed a bug when running HTMLDOC as a macOS application. - Updated the bundled libpng to v1.6.29. # Changes in HTMLDOC v1.8.30 - Updated documentation to reflect new project page on Github. - Dropped old CDE and IRIX desktop integration files. - Cleaned up the GUI and adopted new default text editors for Linux and macOS. - PAGE BREAK comments at the end of a file in web page mode would lose the first page (Issue #251) - Fixed the scaling of header/footer images to limit them to the height of the header or footer (Issue #273) - Fixed an issue with the top-level makefile not exiting with an error as needed (Issue #282) - Fixed a URL referencing bug when the same hostname but a different port was used (Issue #290) - Fixed build issue on macOS (Issue #291) - Fixed handling of indexed+alpha PNG images (Issue #295) # Changes in HTMLDOC v1.8.29 - Updated local PNG library to version 1.6.20. - Updated local JPEG library to version 9b. - Dropped support for OpenSSL. - Added configure script support for libjpeg-turbo. - Updated HTTP code to latest CUPS/ippsample sources. - Duplex PDF output incorrectly forced an even number of pages - The table of contents showed the wrong page numbers after headings containing the "_HD_OMIT_TOC" attribute. - Fixed reported build issues - The configure script's --enable-local* options did not work. # Changes in HTMLDOC v1.8.28 - Updated local zlib to version 1.2.8. - Updated local PNG library to version 1.6.8. - Updated local JPEG library to version 9. - Updated default PDF version to 1.4. - SECURITY: Fixed three buffer overflow issues when reading AFM files and parsing page sizes. - Fixed incompatibility with Fortify's version of strcpy, which does not work properly with variable-length arrays - Fixed compilation against PNG library 1.5 or later - Fixed documentation errors - Marked Zapf-Dingbats as a standard font - Fixed GPL license text in GUI - Fixed a table formatting problem when a column has multiple colspan values - Fixed parsing of HTML comments - Fixed potential out-of-bounds read in table-of-contents rendering code - Fixed handling of image URLs with ampersands in them - Fixed top/bottom margins for logo and header/footer images - Fixed image alignment bug - Fixed X11 build problem
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 18, 2019
3.34.0 3.33.92 - symbolic: send-to metaphor - symbolic: battery-missing-symbolic (sam) - symbolic: pixel perfect question mark (sam) - symbolic: mail-attachment metrics (sam) - symbolic: view-reveal, view-conceal for passwords (sam) - symbolic: keyboard (issue #41) - symbolic: folders as inode (issue 38) - symbolic: orientation icons (https://gitlab.gnome.org/GNOME/gnome-control-center/issues/535) - symbolic: touch-disabled (https://gitlab.gnome.org/GNOME/gnome-control-center/issues/487) - symbolic: weather-tornado (issue 27) - symbolic: battery level icons (issue 6) - fullcolor: colorful packages (issue 32) 3.32.0 - pretty version number 3.31.91 - symbolic: folder-download, inode-directory - symbolic: privacy, dnd, phone device icons - symbolic: new ui context for things that aren't strictly icons. Might go into gtk - symbolic: emoji category tweaks - symbolic: mail-reply, battery status (issue #6) - symbolic: action icons eg rotation - symbolic: drive icon tweaks - fullcolor: more app/mimetype/device/status to legacy - fullcolor: new style for fullcolor icons - folders, mimetypes and devices - cursors: fix a symlink mixup (mr #5) 3.31.1 - few symbolic updates - move a lot of fullcolor icons to legacy context. They will go or be updated in 2 releases. - symbolic: lists (issue #16) - fullcolor: more app, device, mimetypes to legacy
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 18, 2019
- patch-ab/patch-ac/patch-ad/patch-ae/patch-htmldoc_htmlsep.cxx removed Already merged upstream - INSTALL_MAKE_FLAGS removed from Makefile No longer required (autotools do the right things) - OpenSSL option removed OpenSSL support was dropped in version 1.8.29 Always use GnuTLS for "ssl" option ====================== # Changes in HTMLDOC v1.9.7 - Refactored the PRE rendering code to work around compiler optimization bugs (Issue #349) - Added support for links with targets (Issue #351) - Fixed a table rowspan + valign bug (Issue #360) # Changes in HTMLDOC v1.9.6 - Added support for data URIs (Issue #340) - HTMLDOC no longer includes a PDF table of contents when converting a single web page (Issue #344) - Updated the markdown support with external links, additional inline markup, and hard line breaks. - Links in markdown text no longer render with a leading space as part of the link (Issue #346) - Fixed a buffer underflow bug discovered by AddressSanitizer. - Fixed a bug in UTF-8 support (Issue #348) - PDF output now includes the base language of the input document(s) (Issue #350) - Optimized the loading of font widths (Issue #354) - Optimized PDF page resources (Issue #356) - Optimized the base memory used for font widths (Issue #357) - Added proper `­` support (Issue #361) - Title files can now be markdown. # Changes in HTMLDOC v1.9.5 - The GUI did not support EPUB output. - Empty markdown table cells were not rendered in PDF or PostScript output. - The automatically-generated title page now supports both "docnumber" and "version" metadata. - Added support for dc:subject and dc:language metadata in EPUB output from the HTML keywords and lang values. - Added support for the subject and language metadata in markdown input. - Fixed a buffer underflow bug (Issue #338) - `htmldoc --help` now reports whether HTTPS URLs are supported (Issue #339) - Fixed an issue with HTML title pages and EPUB output. # Changes in HTMLDOC v1.9.4 - Inline fixed-width text is no longer reduced in size automatically (Issue #309) - Optimized initialization of font width data (Issue #334) # Changes in HTMLDOC v1.9.3 - Fixed formatting bugs with aligned images (Issue #322, Issue #324) - Fixed support for three digit "#RGB" color values (Issue #323) - Fixed character set support for markdown metadata. - Updated libpng to v1.6.34 (Issue #326) - The makefiles did not use the CPPFLAGS value (Issue #328) # Changes in HTMLDOC v1.9.2 - Added Markdown table support. - Fixed parsing of TBODY, TFOOT, and THEAD elements in HTML files. # Changes in HTMLDOC v1.9.1 - Fixed monospace font size issue (Issue #309) - Added support for reproducible builds (Issue #310) - Added limited support for the HTML 4.0 SPAN element (Issue #311) - Added (extremely limited) UTF-8 support for input files (Issue #314) - Fixed buffer underflow for (invalid) short HTML comments (Issue #316) - Now indent PRE text, by popular request. - EPUB output now makes sure that `<element property>` is written as `<element property="property">`. - Now support both NAME and ID for table-of-contents targets. # Changes in HTMLDOC v1.9 - Added support for repeating a single header row for tables that span multiple pages (Issue #16) - Added support for embedding the current filename/URL in the header or footer (Issue #50) - Added EPUB support (Issue #301) - Added Markdown support (Issue #302) - Fixed a regression in header/footer image scaling (Issue #303) - Documentation updates (Issue #305) - Compiler fixes (Issue #304, Issue #306) - Fixed a bug when running HTMLDOC as a macOS application. - Updated the bundled libpng to v1.6.29. # Changes in HTMLDOC v1.8.30 - Updated documentation to reflect new project page on Github. - Dropped old CDE and IRIX desktop integration files. - Cleaned up the GUI and adopted new default text editors for Linux and macOS. - PAGE BREAK comments at the end of a file in web page mode would lose the first page (Issue #251) - Fixed the scaling of header/footer images to limit them to the height of the header or footer (Issue #273) - Fixed an issue with the top-level makefile not exiting with an error as needed (Issue #282) - Fixed a URL referencing bug when the same hostname but a different port was used (Issue #290) - Fixed build issue on macOS (Issue #291) - Fixed handling of indexed+alpha PNG images (Issue #295) # Changes in HTMLDOC v1.8.29 - Updated local PNG library to version 1.6.20. - Updated local JPEG library to version 9b. - Dropped support for OpenSSL. - Added configure script support for libjpeg-turbo. - Updated HTTP code to latest CUPS/ippsample sources. - Duplex PDF output incorrectly forced an even number of pages - The table of contents showed the wrong page numbers after headings containing the "_HD_OMIT_TOC" attribute. - Fixed reported build issues - The configure script's --enable-local* options did not work. # Changes in HTMLDOC v1.8.28 - Updated local zlib to version 1.2.8. - Updated local PNG library to version 1.6.8. - Updated local JPEG library to version 9. - Updated default PDF version to 1.4. - SECURITY: Fixed three buffer overflow issues when reading AFM files and parsing page sizes. - Fixed incompatibility with Fortify's version of strcpy, which does not work properly with variable-length arrays - Fixed compilation against PNG library 1.5 or later - Fixed documentation errors - Marked Zapf-Dingbats as a standard font - Fixed GPL license text in GUI - Fixed a table formatting problem when a column has multiple colspan values - Fixed parsing of HTML comments - Fixed potential out-of-bounds read in table-of-contents rendering code - Fixed handling of image URLs with ampersands in them - Fixed top/bottom margins for logo and header/footer images - Fixed image alignment bug - Fixed X11 build problem
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 18, 2019
- Switch from FLTK 1.1 to FLTK 1.3 (tested to work with FLTK 1.4 too) ====================== # Changes in HTMLDOC v1.9.7 - Refactored the PRE rendering code to work around compiler optimization bugs (Issue #349) - Added support for links with targets (Issue #351) - Fixed a table rowspan + valign bug (Issue #360) # Changes in HTMLDOC v1.9.6 - Added support for data URIs (Issue #340) - HTMLDOC no longer includes a PDF table of contents when converting a single web page (Issue #344) - Updated the markdown support with external links, additional inline markup, and hard line breaks. - Links in markdown text no longer render with a leading space as part of the link (Issue #346) - Fixed a buffer underflow bug discovered by AddressSanitizer. - Fixed a bug in UTF-8 support (Issue #348) - PDF output now includes the base language of the input document(s) (Issue #350) - Optimized the loading of font widths (Issue #354) - Optimized PDF page resources (Issue #356) - Optimized the base memory used for font widths (Issue #357) - Added proper `­` support (Issue #361) - Title files can now be markdown. # Changes in HTMLDOC v1.9.5 - The GUI did not support EPUB output. - Empty markdown table cells were not rendered in PDF or PostScript output. - The automatically-generated title page now supports both "docnumber" and "version" metadata. - Added support for dc:subject and dc:language metadata in EPUB output from the HTML keywords and lang values. - Added support for the subject and language metadata in markdown input. - Fixed a buffer underflow bug (Issue #338) - `htmldoc --help` now reports whether HTTPS URLs are supported (Issue #339) - Fixed an issue with HTML title pages and EPUB output. # Changes in HTMLDOC v1.9.4 - Inline fixed-width text is no longer reduced in size automatically (Issue #309) - Optimized initialization of font width data (Issue #334) # Changes in HTMLDOC v1.9.3 - Fixed formatting bugs with aligned images (Issue #322, Issue #324) - Fixed support for three digit "#RGB" color values (Issue #323) - Fixed character set support for markdown metadata. - Updated libpng to v1.6.34 (Issue #326) - The makefiles did not use the CPPFLAGS value (Issue #328) # Changes in HTMLDOC v1.9.2 - Added Markdown table support. - Fixed parsing of TBODY, TFOOT, and THEAD elements in HTML files. # Changes in HTMLDOC v1.9.1 - Fixed monospace font size issue (Issue #309) - Added support for reproducible builds (Issue #310) - Added limited support for the HTML 4.0 SPAN element (Issue #311) - Added (extremely limited) UTF-8 support for input files (Issue #314) - Fixed buffer underflow for (invalid) short HTML comments (Issue #316) - Now indent PRE text, by popular request. - EPUB output now makes sure that `<element property>` is written as `<element property="property">`. - Now support both NAME and ID for table-of-contents targets. # Changes in HTMLDOC v1.9 - Added support for repeating a single header row for tables that span multiple pages (Issue #16) - Added support for embedding the current filename/URL in the header or footer (Issue #50) - Added EPUB support (Issue #301) - Added Markdown support (Issue #302) - Fixed a regression in header/footer image scaling (Issue #303) - Documentation updates (Issue #305) - Compiler fixes (Issue #304, Issue #306) - Fixed a bug when running HTMLDOC as a macOS application. - Updated the bundled libpng to v1.6.29. # Changes in HTMLDOC v1.8.30 - Updated documentation to reflect new project page on Github. - Dropped old CDE and IRIX desktop integration files. - Cleaned up the GUI and adopted new default text editors for Linux and macOS. - PAGE BREAK comments at the end of a file in web page mode would lose the first page (Issue #251) - Fixed the scaling of header/footer images to limit them to the height of the header or footer (Issue #273) - Fixed an issue with the top-level makefile not exiting with an error as needed (Issue #282) - Fixed a URL referencing bug when the same hostname but a different port was used (Issue #290) - Fixed build issue on macOS (Issue #291) - Fixed handling of indexed+alpha PNG images (Issue #295) # Changes in HTMLDOC v1.8.29 - Updated local PNG library to version 1.6.20. - Updated local JPEG library to version 9b. - Dropped support for OpenSSL. - Added configure script support for libjpeg-turbo. - Updated HTTP code to latest CUPS/ippsample sources. - Duplex PDF output incorrectly forced an even number of pages - The table of contents showed the wrong page numbers after headings containing the "_HD_OMIT_TOC" attribute. - Fixed reported build issues - The configure script's --enable-local* options did not work. # Changes in HTMLDOC v1.8.28 - Updated local zlib to version 1.2.8. - Updated local PNG library to version 1.6.8. - Updated local JPEG library to version 9. - Updated default PDF version to 1.4. - SECURITY: Fixed three buffer overflow issues when reading AFM files and parsing page sizes. - Fixed incompatibility with Fortify's version of strcpy, which does not work properly with variable-length arrays - Fixed compilation against PNG library 1.5 or later - Fixed documentation errors - Marked Zapf-Dingbats as a standard font - Fixed GPL license text in GUI - Fixed a table formatting problem when a column has multiple colspan values - Fixed parsing of HTML comments - Fixed potential out-of-bounds read in table-of-contents rendering code - Fixed handling of image URLs with ampersands in them - Fixed top/bottom margins for logo and header/footer images - Fixed image alignment bug - Fixed X11 build problem
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 23, 2019
Pkgsrc changes: * Fix == in shell script test. * Add some patches to make this build on NetBSD. Upstream changes: ## 1.2.3 (September 12, 2019) FEATURES: * Oracle Cloud (OCI) Integration: Vault now support using Oracle Cloud for storage, auto unseal, and authentication. IMPROVEMENTS: * auth/jwt: Groups claim matching now treats a string response as a single element list [JWT-63] * auth/kubernetes: enable better support for projected tokens API by allowing user to specify issuer [GH-65] * auth/pcf: The PCF auth plugin was renamed to the CF auth plugin, maintaining full backwards compatibility [GH-7346] * replication: Premium packages now come with unlimited performance standby nodes BUG FIXES: * agent: Allow batch tokens and other non-renewable tokens to be used for agent operations [GH-7441] * auth/jwt: Fix an error where newer (v1.2) token_* configuration parameters were not being applied to tokens generated using the OIDC login flow [JWT-67] * seal/transit: Allow using Vault Agent for transit seal operations [GH-7441] * storage/couchdb: Fix a file descriptor leak [GH-7345] * ui: Fix a bug where the status menu would disappear when trying to revoke a token [GH-7337] * ui: Fix a regression that prevented input of custom items in search-select [GH-7338] * ui: Fix an issue with the namespace picker being unable to render nested namespaces named with numbers and sorting of namespaces in the picker [GH-7333] ## 1.2.2 (August 15, 2019) CHANGES: * auth/pcf: The signature format has been updated to use the standard Base64 encoding instead of the URL-safe variant. Signatures created using the previous format will continue to be accepted [PCF-27] * core: The http response code returned when an identity token key is not found has been changed from 400 to 404 IMPROVEMENTS: * identity: Remove 512 entity limit for groups [GH-7317] BUG FIXES: * auth/approle: Fix an error where an empty token_type string was not being correctly handled as TokenTypeDefault [GH-7273] * auth/radius: Fix panic when logging in [GH-7286] * ui: the string-list widget will now honor multiline input [GH-7254] * ui: various visual bugs in the KV interface were addressed [GH-7307] * ui: fixed incorrect URL to access help in LDAP auth [GH-7299] 1.2.1 (August 6th, 2019) BUG FIXES: * agent: Fix a panic on creds pulling in some error conditions in aws and alicloud auth methods [GH-7238] * auth/approle: Fix error reading role-id on a role created pre-1.2 [GH-7231] * auth/token: Fix sudo check in non-root namespaces on create [GH-7224] * core: Fix health checks with perfstandbyok=true returning the wrong status code [GH-7240] * ui: The web CLI will now parse input as a shell string, with special characters escaped [GH-7206] * ui: The UI will now redirect to a page after authentication [GH-7088] * ui (Enterprise): The list of namespaces is now cleared when logging out [GH-7186] ## 1.2.0 (July 30th, 2019) CHANGES: * Token store roles use new, common token fields for the values that overlap with other auth backends. period, explicit_max_ttl, and bound_cidrs will continue to work, with priority being given to the token_ prefixed versions of those parameters. They will also be returned when doing a read on the role if they were used to provide values initially; however, in Vault 1.4 if period or explicit_max_ttl is zero they will no longer be returned. (explicit_max_ttl was already not returned if empty.) * Due to underlying changes in Go version 1.12 and Go > 1.11.5, Vault is now stricter about what characters it will accept in path names. Whereas before it would filter out unprintable characters (and this could be turned off), control characters and other invalid characters are now rejected within Go's HTTP library before the request is passed to Vault, and this cannot be disabled. To continue using these (e.g. for already-written paths), they must be properly percent-encoded (e.g. \r becomes %0D, \x00 becomes %00, and so on). * The user-configured regions on the AWSKMS seal stanza will now be preferred over regions set in the enclosing environment. This is a breaking change. * All values in audit logs now are omitted if they are empty. This helps reduce the size of audit log entries by not reproducing keys in each entry that commonly don't contain any value, which can help in cases where audit log entries are above the maximum UDP packet size and others. * Both PeriodicFunc and WALRollback functions will be called if both are provided. Previously WALRollback would only be called if PeriodicFunc was not set. See GH-6717 for details. * Vault now uses Go's official dependency management system, Go Modules, to manage dependencies. As a result to both reduce transitive dependencies for API library users and plugin authors, and to work around various conflicts, we have moved various helpers around, mostly under an sdk/ submodule. A couple of functions have also moved from plugin helper code to the api/ submodule. If you are a plugin author, take a look at some of our official plugins and the paths they are importing for guidance. * AppRole uses new, common token fields for values that overlap with other auth backends. period and policies will continue to work, with priority being given to the token_ prefixed versions of those parameters. They will also be returned when doing a read on the role if they were used to provide values initially. * In AppRole, "default" is no longer automatically added to the policies parameter. This was a no-op since it would always be added anyways by Vault's core; however, this can now be explicitly disabled with the new token_no_default_policy field. * In AppRole, bound_cidr_list is no longer returned when reading a role * rollback: Rollback will no longer display log messages when it runs; it will only display messages on error. * Database plugins will now default to 4 max_open_connections rather than 2. FEATURES: * Integrated Storage: Vault 1.2 includes a tech preview of a new way to manage storage directly within a Vault cluster. This new integrated storage solution is based on the Raft protocol which is also used to back HashiCorp Consul and HashiCorp Nomad. * Combined DB credential rotation: Alternative mode for the Combined DB Secret Engine to automatically rotate existing database account credentials and set Vault as the source of truth for credentials. * Identity Tokens: Vault's Identity system can now generate OIDC-compliant ID tokens. These customizable tokens allow encapsulating a signed, verifiable snapshot of identity information and metadata. They can be use by other applications-even those without Vault authorization-as a way of establishing identity based on a Vault entity. * Pivotal Cloud Foundry plugin: New auth method using Pivotal Cloud Foundry certificates for Vault authentication. * ElasticSearch database plugin: New ElasticSearch database plugin issues unique, short-lived ElasticSearch credentials. * New UI Features: An HTTP Request Volume Page and new UI for editing LDAP Users and Groups have been added. * HA support for Postgres: PostgreSQL versions >= 9.5 may now but used as and HA storage backend. * KMIP secrets engine (Enterprise): Allows Vault to operate as a KMIP Server, seamlessly brokering cryptographic operations for traditional infrastructure. * Common Token Fields: Auth methods now use common fields for controlling token behavior, making it easier to understand configuration across methods. * Vault API explorer: The Vault UI now includes an embedded API explorer where you can browse the endpoints avaliable to you and make requests. To try it out, open the Web CLI and type api. IMPROVEMENTS: * agent: Allow EC2 nonce to be passed in [GH-6953] * agent: Add optional namespace parameter, which sets the default namespace for the auto-auth functionality [GH-6988] * agent: Add cert auto-auth method [GH-6652] * api: Add support for passing data to delete operations via DeleteWithData [GH-7139] * audit/file: Dramatically speed up file operations by changing locking/marshaling order [GH-7024] * auth/jwt: A JWKS endpoint may now be configured for signature verification [JWT-43] * auth/jwt: A new verbose_oidc_logging role parameter has been added to help troubleshoot OIDC configuration [JWT-57] * auth/jwt: bound_claims will now match received claims that are lists if any element of the list is one of the expected values [JWT-50] * auth/jwt: Leeways for nbf and exp are now configurable, as is clock skew leeway [JWT-53] * auth/kubernetes: Allow service names/namespaces to be configured as globs [KUBEAUTH-58] * auth/token: Allow the support of the identity system for the token backend via token roles [GH-6267] * auth/token: Add a large set of token configuration options to token store roles [GH-6662] * cli: path-help now allows -format=json to be specified, which will output OpenAPI [GH-7006] * cli: Add support for passing parameters to vault delete operations [GH-7139] * cli: Add a log-format CLI flag that can specify either "standard" or "json" for the log format for the vault servercommand. [GH-6840] * cli: Add -dev-no-store-token to allow dev servers to not store the generated token at the tokenhelper location [GH-7104] * identity: Allow a group alias' canonical ID to be modified * namespaces: Namespaces can now be created and deleted from performance replication secondaries * plugins: Change the default for max_open_connections for DB plugins to 4 [GH-7093] * replication: Client TLS authentication is now supported when enabling or updating a replication secondary * secrets/database: Cassandra operations will now cancel on client timeout [GH-6954] * secrets/kv: Add optional delete_version_after parameter, which takes a duration and can be set on the mount and/or the metadata for a specific key [GH-7005] * storage/postgres: LIST now performs better on large datasets [GH-6546] * storage/s3: A new path parameter allows selecting the path within a bucket for Vault data [GH-7157] * ui: KV v1 and v2 will now gracefully degrade allowing a write without read workflow in the UI [GH-6570] * ui: Many visual improvements with the addition of Toolbars [GH-6626], the restyling of the Confirm Action component [GH-6741], and using a new set of glyphs for our Icon component [GH-6736] * ui: Lazy loading parts of the application so that the total initial payload is smaller [GH-6718] * ui: Tabbing to auto-complete in filters will first complete a common prefix if there is one [GH-6759] * ui: Removing jQuery from the application makes the initial JS payload smaller [GH-6768] BUG FIXES: * audit: Log requests and responses due to invalid wrapping token provided [GH-6541] * audit: Fix bug preventing request counter queries from working with auditing enabled [GH-6767 * auth/aws: AWS Roles are now upgraded and saved to the latest version just after the AWS credential plugin is mounted. [GH-7025] * auth/aws: Fix a case where a panic could stem from a malformed assumed-role ARN when parsing this value [GH-6917] * auth/aws: Fix an error complaining about a read-only view that could occur during updating of a role when on a performance replication secondary [GH-6926] * auth/jwt: Fix a regression introduced in 1.1.1 that disabled checking of client_id for OIDC logins [JWT-54] * auth/jwt: Fix a panic during OIDC CLI logins that could occur if the Vault server response is empty [JWT-55] * auth/jwt: Fix issue where OIDC logins might intermittently fail when using performance standbys [JWT-61] * identity: Fix a case where modifying aliases of an entity could end up moving the entity into the wrong namespace * namespaces: Fix a behavior (currently only known to be benign) where we wouldn't delete policies through the official functions before wiping the namespaces on deletion * secrets/database: Escape username/password before using in connection URL [GH-7089] * secrets/pki: Forward revocation requests to active node when on a performance standby [GH-7173] * ui: Fix timestamp on some transit keys [GH-6827] * ui: Show Entities and Groups in Side Navigation [GH-7138] * ui: Ensure dropdown updates selected item on HTTP Request Metrics page ## 1.1.4/1.1.5 (July 25th/30th, 2019) NOTE: Although 1.1.4 was tagged, we realized very soon after the tag was publicly pushed that an intended fix was accidentally left out. As a result, 1.1.4 was not officially announced and 1.1.5 should be used as the release after 1.1.3. IMPROVEMENTS: * identity: Allow a group alias' canonical ID to be modified * namespaces: Improve namespace deletion performance [GH-6939] * namespaces: Namespaces can now be created and deleted from performance replication secondaries BUG FIXES: * api: Add backwards compat support for API env vars [GH-7135] * auth/aws: Fix a case where a panic could stem from a malformed assumed-role ARN when parsing this value [GH-6917] * auth/ldap: Add use_pre111_group_cn_behavior flag to allow recovering from a regression caused by a bug fix starting in 1.1.1 [GH-7208] * auth/aws: Use a role cache to avoid separate locking paths [GH-6926] * core: Fix a deadlock if a panic happens during request handling [GH-6920] * core: Fix an issue that may cause key upgrades to not be cleaned up properly [GH-6949] * core: Don't shutdown if key upgrades fail due to canceled context [GH-7070] * core: Fix panic caused by handling requests while vault is inactive * identity: Fix reading entity and groups that have spaces in their names [GH-7055] * identity: Ensure entity alias operations properly verify namespace [GH-6886] * mfa: Fix a nil pointer panic that could occur if invalid Duo credentials were supplied * replication: Forward step-down on perf standbys to match HA behavior * replication: Fix various read only storage errors on performance standbys * replication: Stop forwarding before stopping replication to eliminate some possible bad states * secrets/database: Allow cassandra queries to be cancled [GH-6954] * storage/consul: Fix a regression causing vault to not connect to consul over unix sockets [GH-6859] * ui: Fix saving of TTL and string array fields generated by Open API [GH-7094] ## 1.1.3 (June 5th, 2019) IMPROVEMENTS: * agent: Now supports proxying request query parameters [GH-6772] * core: Mount table output now includes a UUID indicating the storage path [GH-6633] * core: HTTP server timeout values are now configurable [GH-6666] * replication: Improve performance of the reindex operation on secondary clusters when mount filters are in use * replication: Replication status API now returns the state and progress of a reindex BUG FIXES: * api: Return the Entity ID in the secret output [GH-6819] * auth/jwt: Consider bound claims when considering if there is at least one bound constraint [JWT-49] * auth/okta: Fix handling of group names containing slashes [GH-6665] * cli: Add deprecated stored-shares flag back to the init command [GH-6677] * cli: Fix a panic when the KV command would return no data [GH-6675] * cli: Fix issue causing CLI list operations to not return proper format when there is an empty response [GH-6776] * core: Correctly honor non-HMAC request keys when auditing requests [GH-6653] * core: Fix the `x-vault-unauthenticated` value in OpenAPI for a number of endpoints [GH-6654] * core: Fix issue where some OpenAPI parameters were incorrectly listed as being sent as a header [GH-6679] * core: Fix issue that would allow duplicate mount names to be used [GH-6771] * namespaces: Fix behavior when using `root` instead of `root/` as the namespace header value * pki: fix a panic when a client submits a null value [GH-5679] * replication: Properly update mount entry cache on a secondary to apply all new values after a tune * replication: Properly close connection on bootstrap error * replication: Fix an issue causing startup problems if a namespace policy wasn't replicated properly * replication: Fix longer than necessary WAL replay during an initial reindex * replication: Fix error during mount filter invalidation on DR secondary clusters * secrets/ad: Make time buffer configurable [AD-35] * secrets/gcp: Check for nil config when getting credentials [SGCP-35] * secrets/gcp: Fix error checking in some cases where the returned value could be 403 instead of 404 [SGCP-37] * secrets/gcpkms: Disable key rotation when deleting a key [GCPKMS-10] * storage/consul: recognize `https://` address even if schema not specified [GH-6602] * storage/dynamodb: Fix an issue where a deleted lock key in DynamoDB (HA) could cause constant switching of the active node [GH-6637] * storage/dynamodb: Eliminate a high-CPU condition that could occur if an error was received from the DynamoDB API [GH-6640] * storage/gcs: Correctly use configured chunk size values [GH-6655] * storage/mssql: Use the correct database when pre-created schemas exist [GH-6356] * ui: Fix issue with select arrows on drop down menus [GH-6627] * ui: Fix an issue where sensitive input values weren't being saved to the server [GH-6586] * ui: Fix web cli parsing when using quoted values [GH-6755] * ui: Fix a namespace workflow mapping identities from external namespaces by allowing arbitrary input in search-select component [GH-6728] * core: Fix issue that would allow duplicate mount names to be used [GH-6771] * namespaces: Fix behavior when using `root` instead of `root/` as the namespace header value * pki: fix a panic when a client submits a null value [GH-5679] * replication: Properly update mount entry cache on a secondary to apply all new values after a tune * replication: Properly close connection on bootstrap error * replication: Fix an issue causing startup problems if a namespace policy wasn't replicated properly * replication: Fix longer than necessary WAL replay during an initial reindex * replication: Fix error during mount filter invalidation on DR secondary clusters * secrets/ad: Make time buffer configurable [AD-35] * secrets/gcp: Check for nil config when getting credentials [SGCP-35] * secrets/gcp: Fix error checking in some cases where the returned value could be 403 instead of 404 [SGCP-37] * secrets/gcpkms: Disable key rotation when deleting a key [GCPKMS-10] * storage/consul: recognize `https://` address even if schema not specified [GH-6602] * storage/dynamodb: Fix an issue where a deleted lock key in DynamoDB (HA) could cause constant switching of the active node [GH-6637] * storage/dynamodb: Eliminate a high-CPU condition that could occur if an error was received from the DynamoDB API [GH-6640] * storage/gcs: Correctly use configured chunk size values [GH-6655] * storage/mssql: Use the correct database when pre-created schemas exist [GH-6356] * ui: Fix issue with select arrows on drop down menus [GH-6627] * ui: Fix an issue where sensitive input values weren't being saved to the server [GH-6586] * ui: Fix web cli parsing when using quoted values [GH-6755] * ui: Fix a namespace workflow mapping identities from external namespaces by allowing arbitrary input in search-select component [GH-6728] ## 1.1.2 (April 18th, 2019) This is a bug fix release containing the two items below. It is otherwise unchanged from 1.1.1. BUG FIXES: * auth/okta: Fix a potential dropped error [GH-6592] * secrets/kv: Fix a regression on upgrade where a KVv2 mount could fail to be mounted on unseal if it had previously been mounted but not written to [KV-31] ## 1.1.1 (April 11th, 2019) SECURITY: * Given: (a) performance replication is enabled; (b) performance standbys are in use on the performance replication secondary cluster; and (c) mount filters are in use, if a mount that was previously available to a secondary is updated to be filtered out, although the data would be removed from the secondary cluster, the in-memory cache of the data would not be purged on the performance standby nodes. As a result, the previously-available data could still be read from memory if it was ever read from disk, and if this included mount configuration data this could result in token or lease BUG FIXES: * agent: Allow auto-auth to be used with caching without having to define any sinks [GH-6468] * agent: Disallow some nonsensical config file combinations [GH-6471] * auth/ldap: Fix CN check not working if CN was not all in uppercase [GH-6518] * auth/jwt: The CLI helper for OIDC logins will now open the browser to the correct URL when running on Windows [JWT-37] * auth/jwt: Fix OIDC login issue where configured TLS certs weren't being used [JWT-40] * auth/jwt: Fix an issue where the `oidc_scopes` parameter was not being included in the response to a role read request [JWT-35] * core: Fix seal migration case when migrating to Shamir and a seal block wasn't explicitly specified [GH-6455] * core: Fix unwrapping when using namespaced wrapping tokens [GH-6536] * core: Fix incorrect representation of required properties in OpenAPI output [GH-6490] * core: Fix deadlock that could happen when using the UI [GH-6560] * identity: Fix updating groups removing existing members [GH-6527] * identity: Properly invalidate group alias in performance secondary [GH-6564] * identity: Use namespace context when loading entities and groups to ensure merging of duplicate entries works properly [GH-6563] * replication: Fix performance standby election failure [GH-6561] * replication: Fix mount filter invalidation on performance standby nodes * replication: Fix license reloading on performance standby nodes * replication: Fix handling of control groups on performance standby nodes * replication: Fix some forwarding scenarios with request bodies using performance standby nodes [GH-6538] * secret/gcp: Fix roleset binding when using JSON [GCP-27] * secret/pki: Use `uri_sans` param in when not using CSR parameters [GH-6505] * storage/dynamodb: Fix a race condition possible in HA configurations that could leave the cluster without a leader [GH-6512] * ui: Fix an issue where in production builds OpenAPI model generation was failing, causing any form using it to render labels with missing fields [GH-6474] * ui: Fix issue nav-hiding when moving between namespaces [GH-6473] * ui: Secrets will always show in the nav regardless of access to cubbyhole [GH-6477] * ui: fix SSH OTP generation [GH-6540] * ui: add polyfill to load UI in IE11 [GH-6567] * ui: Fix issue where some elements would fail to work properly if using ACLs with segment-wildcard paths (`/+/` segments) [GH-6525] ## 1.1.0 (March 18th, 2019) CHANGES: * auth/jwt: The `groups_claim_delimiter_pattern` field has been removed. If the groups claim is not at the top level, it can now be specified as a [JSONPointer](https://tools.ietf.org/html/rfc6901). * auth/jwt: Roles now have a "role type" parameter with a default type of "oidc". To configure new JWT roles, a role type of "jwt" must be explicitly specified. * cli: CLI commands deprecated in 0.9.2 are now removed. Please see the CLI help/warning output in previous versions of Vault for updated commands. * core: Vault no longer automatically mounts a K/V backend at the "secret/" path when initializing Vault * core: Vault's cluster port will now be open at all times on HA standby nodes * plugins: Vault no longer supports running netRPC plugins. These were deprecated in favor of gRPC based plugins and any plugin built since 0.9.4 defaults to gRPC. Older plugins may need to be recompiled against the latest Vault dependencies. FEATURES: * **Vault Agent Caching**: Vault Agent can now be configured to act as a caching proxy to Vault. Clients can send requests to Vault Agent and the request will be proxied to the Vault server and cached locally in Agent. Currently Agent will cache generated leases and tokens and keep them renewed. The proxy can also use the Auto Auth feature so clients do not need to authenticate to Vault, but rather can make requests to Agent and have Agent fully manage token lifecycle. * **OIDC Redirect Flow Support**: The JWT auth backend now supports OIDC roles. These allow authentication via an OIDC-compliant provider via the user's browser. The login may be initiated from the Vault UI or through the `vault login` command. * **ACL Path Wildcard**: ACL paths can now use the `+` character to enable wild card matching for a single directory in the path definition. * **Transit Auto Unseal**: Vault can now be configured to use the Transit Secret Engine in another Vault cluster as an auto unseal provider. IMPROVEMENTS: * auth/jwt: A default role can be set. It will be used during JWT/OIDC logins if a role is not specified. * auth/jwt: Arbitrary claims data can now be copied into token & alias metadata. * auth/jwt: An arbitrary set of bound claims can now be configured for a role. * auth/jwt: The name "oidc" has been added as an alias for the jwt backend. Either name may be specified in the `auth enable` command. * command/server: A warning will be printed when 'tls_cipher_suites' includes a blacklisted cipher suite or all cipher suites are blacklisted by the HTTP/2 specification [GH-6300] * core/metrics: Prometheus pull support using a new sys/metrics endpoint. [GH-5308] * core: On non-windows platforms a SIGUSR2 will make the server log a dump of all running goroutines' stack traces for debugging purposes [GH-6240] * replication: The initial replication indexing process on newly initialized or upgraded clusters now runs asynchronously * sentinel: Add token namespace id and path, available in rules as token.namespace.id and token.namespace.path * ui: The UI is now leveraging OpenAPI definitions to pull in fields for various forms. This means, it will not be necessary to add fields on the go and JS sides in the future. [GH-6209] BUG FIXES: * auth/jwt: Apply `bound_claims` validation across all login paths * auth/jwt: Update `bound_audiences` validation during non-OIDC logins to accept any matched audience, as documented and handled in OIDC logins [JWT-30] * auth/token: Fix issue where empty values for token role update call were ignored [GH-6314] * core: The `operator migrate` command will no longer hang on empty key names [GH-6371] * identity: Fix a panic at login when external group has a nil alias [GH-6230] * namespaces: Clear out identity store items upon namespace deletion * replication/perfstandby: Fixed a bug causing performance standbys to wait longer than necessary after forwarding a write to the active node * replication/mountfilter: Fix a deadlock that could occur when mount filters were updated [GH-6426] * secret/kv: Fix issue where a v1âv2 upgrade could run on a performance standby when using a local mount * secret/ssh: Fix for a bug where attempting to delete the last ssh role in the zeroaddress configuration could fail [GH-6390] * secret/totp: Uppercase provided keys so they don't fail base32 validation [GH-6400] * secret/transit: Multiple HMAC, Sign or Verify operations can now be performed with one API call using the new `batch_input` parameter [GH-5875] * sys: `sys/internal/ui/mounts` will no longer return secret or auth mounts that have been filtered. Similarly, `sys/internal/ui/mount/:path` will return a error response if a filtered mount path is requested. [GH-6412] * ui: Fix for a bug where you couldn't access the data tab after clicking on wrap details on the unwrap page [GH-6404] * ui: Fix an issue where the policies tab was erroneously hidden [GH-6301] * ui: Fix encoding issues with kv interfaces [GH-6294] ## 1.0.3.1 (March 14th, 2019) (Enterprise Only) SECURITY: * A regression was fixed in replication mount filter code introduced in Vault 1.0 that caused the underlying filtered data to be replicated to secondaries. This data was not accessible to users via Vault's API but via a combination of privileged configuration file changes/Vault commands it could be read. Upgrading to this version or 1.1 will fix this issue and cause the replicated data to be deleted from filtered secondaries. More information was sent to customer contacts on file. ## 1.0.3 (February 12th, 2019) CHANGES: * New AWS authentication plugin mounts will default to using the generated role ID as the Identity alias name. This applies to both EC2 and IAM auth. Existing mounts that explicitly set this value will not be affected but mounts that specified no preference will switch over on upgrade. * The default policy now allows a token to look up its associated identity entity either by name or by id [GH-6105] * The Vault UI's navigation and onboarding wizard now only displays items that are permitted in a users' policy [GH-5980, GH-6094] * An issue was fixed that caused recovery keys to not work on secondary clusters when using a different unseal mechanism/key than the primary. This would be hit if the cluster was rekeyed or initialized after 1.0. We recommend rekeying the recovery keys on the primary cluster if you meet the above requirements. FEATURES: * **cURL Command Output**: CLI commands can now use the `-output-curl-string` flag to print out an equivalent cURL command. * **Response Headers From Plugins**: Plugins can now send back headers that will be included in the response to a client. The set of allowed headers can be managed by the operator. IMPROVEMENTS: * auth/aws: AWS EC2 authentication can optionally create entity aliases by role ID [GH-6133] * auth/jwt: The supported set of signing algorithms is now configurable [JWT plugin GH-16] * core: When starting from an uninitialized state, HA nodes will now attempt to auto-unseal using a configured auto-unseal mechanism after the active node initializes Vault [GH-6039] * secret/database: Add socket keepalive option for Cassandra [GH-6201] * secret/ssh: Add signed key constraints, allowing enforcement of key types and minimum key sizes [GH-6030] * secret/transit: ECDSA signatures can now be marshaled in JWS-compatible fashion [GH-6077] * storage/etcd: Support SRV service names [GH-6087] * storage/aws: Support specifying a KMS key ID for server-side encryption [GH-5996] BUG FIXES: * core: Fix a rare case where a standby whose connection is entirely torn down to the active node, then reconnects to the same active node, may not successfully resume operation [GH-6167] * cors: Don't duplicate headers when they're written [GH-6207] * identity: Persist merged entities only on the primary [GH-6075] * replication: Fix a potential race when a token is created and then used with a performance standby very quickly, before an associated entity has been replicated. If the entity is not found in this scenario, the request will forward to the active node. * replication: Fix issue where recovery keys would not work on secondary clusters if using a different unseal mechanism than the primary. * replication: Fix a "failed to register lease" error when using performance standbys * storage/postgresql: The `Get` method will now return an Entry object with the `Key` member correctly populated with the full path that was requested instead of just the last path element [GH-6044] ## 1.0.2 (January 15th, 2019) SECURITY: * When creating a child token from a parent with `bound_cidrs`, the list of CIDRs would not be propagated to the child token, allowing the child token to be used from any address. CHANGES: * secret/aws: Role now returns `credential_type` instead of `credential_types` to match role input. If a legacy role that can supply more than one credential type, they will be concatenated with a `,`. * physical/dynamodb, autoseal/aws: Instead of Vault performing environment variable handling, and overriding static (config file) values if found, we use the default AWS SDK env handling behavior, which also looks for deprecated values. If you were previously providing both config values and environment values, please ensure the config values are unset if you want to use environment values. * Namespaces (Enterprise): Providing "root" as the header value for `X-Vault-Namespace` will perform the request on the root namespace. This is equivalent to providing an empty value. Creating a namespace called "root" in the root namespace is disallowed. FEATURES: * **InfluxDB Database Plugin**: Use Vault to dynamically create and manage InfluxDB users IMPROVEMENTS: * auth/aws: AWS EC2 authentication can optionally create entity aliases by image ID [GH-5846] * autoseal/gcpckms: Reduce the required permissions for the GCPCKMS autounseal [GH-5999] * physical/foundationdb: TLS support added. [GH-5800] BUG FIXES: * api: Fix a couple of places where we were using the `LIST` HTTP verb (necessary to get the right method into the wrapping lookup function) and not then modifying it to a `GET`; although this is officially the verb Vault uses for listing and it's fully legal to use custom verbs, since many WAFs and API gateways choke on anything outside of RFC-standardized verbs we fall back to `GET` [GH-6026] * autoseal/aws: Fix reading session tokens when AWS access key/secret key are also provided [GH-5965] * command/operator/rekey: Fix help output showing `-delete-backup` when it should show `-backup-delete` [GH-5981] * core: Fix bound_cidrs not being propagated to child tokens * replication: Correctly forward identity entity creation that originates from performance standby nodes (Enterprise) * secret/aws: Make input `credential_type` match the output type (string, not array) [GH-5972] * secret/cubbyhole: Properly cleanup cubbyhole after token revocation [GH-6006] * secret/pki: Fix reading certificates on windows with the file storage backend [GH-6013] * ui (enterprise): properly display perf-standby count on the license page [GH-5971] * ui: fix disappearing nested secrets and go to the nearest parent when deleting a secret - [GH-5976] * ui: fix error where deleting an item via the context menu would fail if the item name contained dots [GH-6018] * ui: allow saving of kv secret after an errored save attempt [GH-6022] * ui: fix display of kv-v1 secret containing a key named "keys" [GH-6023] ## 1.0.1 (December 14th, 2018) SECURITY: * Update version of Go to 1.11.3 to fix Go bug golang/go#29233 which corresponds to CVE-2018-16875 * Database user revocation: If a client has configured custom revocation statements for a role with a value of `""`, that statement would be executed verbatim, resulting in a lack of actual revocation but success for the operation. Vault will now strip empty statements from any provided; as a result if an empty statement is provided, it will behave as if no statement is provided, falling back to the default revocation statement. CHANGES: * secret/database: On role read, empty statements will be returned as empty slices instead of potentially being returned as JSON null values. This makes it more in line with other parts of Vault and makes it easier for statically typed languages to interpret the values. IMPROVEMENTS: * cli: Strip iTerm extra characters from password manager input [GH-5837] * command/server: Setting default kv engine to v1 in -dev mode can now be specified via -dev-kv-v1 [GH-5919] * core: Add operationId field to OpenAPI output [GH-5876] * ui: Added ability to search for Group and Policy IDs when creating Groups and Entities instead of typing them in manually BUG FIXES: * auth/azure: Cache azure authorizer [15] * auth/gcp: Remove explicit project for service account in GCE authorizer [58] * cli: Show correct stored keys/threshold for autoseals [GH-5910] * cli: Fix backwards compatibility fallback when listing plugins [GH-5913] * core: Fix upgrades when the seal config had been created on early versions of vault [GH-5956] * namespaces: Correctly reload the proper mount when tuning or reloading the mount [GH-5937] * secret/azure: Cache azure authorizer [19] * secret/database: Strip empty statements on user input [GH-5955] * secret/gcpkms: Add path for retrieving the public key [5] * secret/pki: Fix panic that could occur during tidy operation when malformed data was found [GH-5931] * secret/pki: Strip empty line in ca_chain output [GH-5779] * ui: Fixed a bug where the web CLI was not usable via the `fullscreen` command - [GH-5909] * ui: Fix a bug where you couldn't write a jwt auth method config [GH-5936] ## 0.11.6 (December 14th, 2018) This release contains the three security fixes from 1.0.0 and 1.0.1 and the following bug fixes from 1.0.0/1.0.1: * namespaces: Correctly reload the proper mount when tuning or reloading the mount [GH-5937] * replication/perfstandby: Fix audit table upgrade on standbys [GH-5811] * replication/perfstandby: Fix redirect on approle update [GH-5820] * secrets/kv: Fix issue where storage version would get incorrectly downgraded [GH-5809] It is otherwise identical to 0.11.5. ## 1.0.0 (December 3rd, 2018) SECURITY: * When debugging a customer incident we discovered that in the case of malformed data from an autoseal mechanism, Vault's master key could be logged in Vault's server log. For this to happen, the data would need to be modified by the autoseal mechanism after being submitted to it by Vault but prior to encryption, or after decryption, prior to it being returned to Vault. To put it another way, it requires the data that Vault submits for encryption to not match the data returned after decryption. It is not sufficient for the autoseal mechanism to return an error, and it cannot be triggered by an outside attacker changing the on-disk ciphertext as all autoseal mechanisms use authenticated encryption. We do not believe that this is generally a cause for concern; since it involves the autoseal mechanism returning bad data to Vault but with no error, in a working Vault configuration this code path should never be hit, and if hitting this issue Vault will not be unsealing properly anyways so it will be obvious what is happening and an immediate rekey of the master key can be performed after service is restored. We have filed for a CVE (CVE-2018-19786) and a CVSS V3 score of 5.2 has been assigned. CHANGES: * Tokens are now prefixed by a designation to indicate what type of token they are. Service tokens start with `s.` and batch tokens start with `b.`. Existing tokens will still work (they are all of service type and will be considered as such). Prefixing allows us to be more efficient when consuming a token, which keeps the critical path of requests faster. * Paths within `auth/token` that allow specifying a token or accessor in the URL have been removed. These have been deprecated since March 2016 and undocumented, but were retained for backwards compatibility. They shouldn't be used due to the possibility of those paths being logged, so at this point they are simply being removed. * Vault will no longer accept updates when the storage key has invalid UTF-8 character encoding [GH-5819] * Mount/Auth tuning the `options` map on backends will now upsert any provided values, and keep any of the existing values in place if not provided. The options map itself cannot be unset once it's set, but the keypairs within the map can be unset if an empty value is provided, with the exception of the `version` keypair which is handled differently for KVv2 purposes. * Agent no longer automatically reauthenticates when new credentials are detected. It's not strictly necessary and in some cases was causing reauthentication much more often than intended. * HSM Regenerate Key Support Removed: Vault no longer supports destroying and regenerating encryption keys on an HSM; it only supports creating them. Although this has never been a source of a customer incident, it is simply a code path that is too trivial to activate, especially by mistyping `regenerate_key` instead of `generate_key`. * Barrier Config Upgrade (Enterprise): When upgrading from Vault 0.8.x, the seal type in the barrier config storage entry will be upgraded from "hsm-auto" to "awskms" or "pkcs11" upon unseal if using AWSKMS or HSM seals. If performing seal migration, the barrier config should first be upgraded prior to starting migration. * Go API client uses pooled HTTP client: The Go API client now uses a connection-pooling HTTP client by default. For CLI operations this makes no difference but it should provide significant performance benefits for those writing custom clients using the Go API library. As before, this can be changed to any custom HTTP client by the caller. * Builtin Secret Engines and Auth Methods are integrated deeper into the plugin system. The plugin catalog can now override builtin plugins with custom versions of the same name. Additionally the plugin system now requires a plugin `type` field when configuring plugins, this can be "auth", "database", or "secret". FEATURES: * **Auto-Unseal in Open Source**: Cloud-based auto-unseal has been migrated from Enterprise to Open Source. We've created a migrator to allow migrating between Shamir seals and auto unseal methods. * **Batch Tokens**: Batch tokens trade off some features of service tokens for no storage overhead, and in most cases can be used across performance replication clusters. * **Replication Speed Improvements**: We've worked hard to speed up a lot of operations when using Vault Enterprise Replication. * **GCP KMS Secrets Engine**: This new secrets engine provides a Transit-like pattern to keys stored within GCP Cloud KMS. * **AppRole support in Vault Agent Auto-Auth**: You can now use AppRole credentials when having Agent automatically authenticate to Vault * **OpenAPI Support**: Descriptions of mounted backends can be served directly from Vault * **Kubernetes Projected Service Account Tokens**: Projected Service Account Tokens are now supported in Kubernetes auth * **Response Wrapping in UI**: Added ability to wrap secrets and easily copy the wrap token or secret JSON in the UI IMPROVEMENTS: * agent: Support for configuring the location of the kubernetes service account [GH-5725] * auth/token: New tokens are indexed in storage HMAC-SHA256 instead of SHA1 * secret/totp: Allow @ character to be part of key name [GH-5652] * secret/consul: Add support for new policy based tokens added in Consul 1.4 [GH-5586] * ui: Improve the token auto-renew warning, and automatically begin renewal when a user becomes active again [GH-5662] * ui: The unbundled UI page now has some styling [GH-5665] * ui: Improved banner and popup design [GH-5672] * ui: Added token type to auth method mount config [GH-5723] * ui: Display additonal wrap info when unwrapping. [GH-5664] * ui: Empty states have updated styling and link to relevant actions and documentation [GH-5758] * ui: Allow editing of KV V2 data when a token doesn't have capabilities to read secret metadata [GH-5879] BUG FIXES: * agent: Fix auth when multiple redirects [GH-5814] * cli: Restore the `-policy-override` flag [GH-5826] * core: Fix rekey progress reset which did not happen under certain circumstances. [GH-5743] * core: Migration from autounseal to shamir will clean up old keys [GH-5671] * identity: Update group memberships when entity is deleted [GH-5786] * replication/perfstandby: Fix audit table upgrade on standbys [GH-5811] * replication/perfstandby: Fix redirect on approle update [GH-5820] * secrets/azure: Fix valid roles being rejected for duplicate ids despite having distinct scopes [[GH-16]](hashicorp/vault-plugin-secrets-azure#16) * storage/gcs: Send md5 of values to GCS to avoid potential corruption [GH-5804] * secrets/kv: Fix issue where storage version would get incorrectly downgraded [GH-5809] * secrets/kv: Disallow empty paths on a `kv put` while accepting empty paths for all other operations for backwards compatibility [[GH-19]](hashicorp/vault-plugin-secrets-kv#19) * ui: Allow for secret creation in kv v2 when cas_required=true [GH-5823] * ui: Fix dr secondary operation token generation via the ui [GH-5818] * ui: Fix the PKI context menu so that items load [GH-5824] * ui: Update DR Secondary Token generation command [GH-5857] * ui: Fix pagination bug where controls would be rendered once for each item when viewing policies [GH-5866] * ui: Fix bug where `sys/leases/revoke` required 'sudo' capability to show the revoke button in the UI [GH-5647] * ui: Fix issue where certain pages wouldn't render in a namespace [GH-5692] ## 0.11.5 (November 13th, 2018) BUG FIXES: * agent: Fix issue when specifying two file sinks [GH-5610] * auth/userpass: Fix minor timing issue that could leak the presence of a username [GH-5614] * autounseal/alicloud: Fix issue interacting with the API (Enterprise) * autounseal/azure: Fix key version tracking (Enterprise) * cli: Fix panic that could occur if parameters were not provided [GH-5603] * core: Fix buggy behavior if trying to remount into a namespace * identity: Fix duplication of entity alias entity during alias transfer between entities [GH-5733] * namespaces: Fix tuning of auth mounts in a namespace * ui: Fix bug where editing secrets as JSON doesn't save properly [GH-5660] * ui: Fix issue where IE 11 didn't render the UI and also had a broken form when trying to use tool/hash [GH-5714] ## 0.11.4 (October 23rd, 2018) CHANGES: * core: HA lock file is no longer copied during `operator migrate` [GH-5503]. We've categorized this as a change, but generally this can be considered just a bug fix, and no action is needed. FEATURES: * **Transit Key Trimming**: Keys in transit secret engine can now be trimmed to remove older unused key versions * **Web UI support for KV Version 2**: Browse, delete, undelete and destroy individual secret versions in the UI * **Azure Existing Service Principal Support**: Credentials can now be generated against an existing service principal IMPROVEMENTS: * core: Add last WAL in leader/health output for easier debugging [GH-5523] * identity: Identity names will now be handled case insensitively by default. This includes names of entities, aliases and groups [GH-5404] * secrets/aws: Added role-option max_sts_ttl to cap TTL for AWS STS credentials [GH-5500] * secret/database: Allow Cassandra user to be non-superuser so long as it has role creation permissions [GH-5402] * secret/radius: Allow setting the NAS Identifier value in the generated packet [GH-5465] * secret/ssh: Allow usage of JSON arrays when setting zero addresses [GH-5528] * secret/transit: Allow trimming unused keys [GH-5388] * ui: Support KVv2 [GH-5547], [GH-5563] * ui: Allow viewing and updating Vault license via the UI * ui: Onboarding will now display your progress through the chosen tutorials * ui: Dynamic secret backends obfuscate sensitive data by default and visibility is toggleable BUG FIXES: * agent: Fix potential hang during agent shutdown [GH-5026] * auth/ldap: Fix listing of users/groups that contain slashes [GH-5537] * core: Fix memory leak during some expiration calls [GH-5505] * core: Fix generate-root operations requiring empty `otp` to be provided instead of an empty body [GH-5495] * identity: Remove lookup check during alias removal from entity [GH-5524] * secret/pki: Fix TTL/MaxTTL check when using `sign-verbatim` [GH-5549] * secret/pki: Fix regression in 0.11.2+ causing the NotBefore value of generated certificates to be set to the Unix epoch if the role value was not set, instead of using the default of 30 seconds [GH-5481] * storage/mysql: Use `varbinary` instead of `varchar` when creating HA tables [GH-5529] ## 0.11.3 (October 8th, 2018) SECURITY: * Revocation: A regression in 0.11.2 (OSS) and 0.11.0 (Enterprise) caused lease IDs containing periods (`.`) to not be revoked properly. Upon startup when revocation is tried again these should now revoke successfully. IMPROVEMENTS: * auth/ldap: Listing of users and groups return absolute paths [GH-5537] * secret/pki: OID SANs can now specify `*` to allow any value [GH-5459] BUG FIXES: * auth/ldap: Fix panic if specific values were given to be escaped [GH-5471] * cli/auth: Fix panic if `vault auth` was given no parameters [GH-5473] * secret/database/mongodb: Fix panic that could occur at high load [GH-5463] * secret/pki: Fix CA generation not allowing OID SANs [GH-5459]
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 28, 2019
1.20191002 2019-10-02 09:32:54-07:00 America/Los_Angeles
- replace non-core CGI dependency with core CPAN dependency
(Yanick Champoux, GH PR #16)
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Feb 11, 2023
Change log: 4.18.0 (2023-02-08) ====== - Changed Orage internal time and data strings to GDateTime (MR !20) - In event list, fixed event hiding when event start at 00:00 and end 00:00 in same date (this kind event can be created when creating full day event, save event and then unset full day option). (MR !20) - Removed bundled libical (Issue #5) - Removed panel plugin (Issue #11) - Removed GlobalTime (Issue #12) - Replaced old Orage icons (Issue #16) and removed 160x160 icons - Replaced deprecated dbus-glib with GDBus (Issue #4) - Changed event attach order in day view window (Issue #15) - Added Wayland support (Issue #2) - Fixed orage_persistent_alarms.txt not found messages (MR !35) - Fixed after wakeup tray icon updating (Issue #14) - Changed alarm_structure to reference counted structure. This fixes warnings about memory leaks (MR !38, replaces MR !8) - Changed libnotify minimum version to 0.7.0 (MR !39) - Disabled sound alarm when sound command is not set (MR !40) - Fixed large ical file import (Issue #8) - Translation Updates: Albanian, Amharic, Arabic, Armenian (Armenia), Asturian, Basque, Belarusian, Bulgarian, Catalan, Chinese (China), Chinese (Taiwan), Croatian, Czech, Danish, Dutch, English (Australia), English (United Kingdom), Esperanto, Estonian, Finnish, French, Galician, German, Greek, Hebrew, Hungarian, Icelandic, Indonesian, Italian, Japanese, Kazakh, Korean, Latvian, Lithuanian, Malay, Norwegian Bokml, Norwegian Nynorsk, Occitan (post 1500), Polish, Portuguese, Portuguese (Brazil), Romanian, Russian, Serbian, Slovak, Spanish, Swedish, Thai, Turkish, Ukrainian, Urdu, Urdu (Pakistan), Uyghur, Vietnamese
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Mar 5, 2023
2.1.0 (2023-03-03) What's Changed * Add support for custom RateLimit headers. by @brookemckim in #13 * Fixes retry_block example in README. by @justinlittman in #12 * README: update link to the RateLimit RFC by @olleolleolle in #14 * docs: update link to RFC by @olleolleolle in #15 * Rubocop linting by @olleolleolle in #16 * style: disable Metrics/ClassLength by @olleolleolle in #17 * Adds Ruby 3.2 to the CI matrix by @petergoldstein in #18 * Typo fix :) by @adifsgaid in #19 * Introduce issue templates by @iMacTia in #22 New Contributors * @justinlittman made their first contribution in #12 * @brookemckim made their first contribution in #13 * @petergoldstein made their first contribution in #18 * @adifsgaid made their first contribution in #19
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Apr 11, 2023
Upstream changes:
1.64 2022-08-16 rurban
----
* Exec: Silence all Windows -Wint-conversion and -Wint-to-pointer-cast
warnings
1.63 2022-08-11 rurban
----
* Exec: Really fix USE_ITHREADS (GH #17) with USE_THREADS
on windows. USE_5005THREADS is not defined in older perls, but
OLD_PTHREADS_API is.
1.62 2022-08-10 rurban
----
* Exec: compile with USE_THREADS and USE_ITHREADS (GH #17)
* add a make release target
1.61 2022-06-13 rurban
----
* perfilter.pod: minor improvements (PR #16 khw)
* Remove runtime recommends META (GH #14 kentfredric)
* use strict in all modules. Fixes Test::Kwalitee.
* Add github actions, and cirrus CI's
* Updated Copyright years.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Jun 12, 2023
What's Changed - Add NetBSD by @0323pin in #3 - Migrate from tui-rs to ratatui by @AmmarAbouZor in #4 - settings improvements by @AmmarAbouZor in #13 - [Documentation] Create README Badges by @kevinmatthes in #14 - CI Improvements by @AmmarAbouZor in #15 - Changed: Help popup improvements by @AmmarAbouZor in #17 - Added: Export current journal's content by @AmmarAbouZor in #18 - Increase Version by @AmmarAbouZor in #19 - Fixed setting backend path from CLI by @AmmarAbouZor in #22 - Added: Release CD action by @AmmarAbouZor in #24 - Fixed: Export journal extension by @AmmarAbouZor in #25 - Changed: Enhance render loop by @AmmarAbouZor in #28 - Added: CITATION.cff by @kevinmatthes in #26 - Added: Edit current journal content in external editor by @AmmarAbouZor in #29 - Added: configure CHANGELOG maintenance utilities by @kevinmatthes in #16 - Added: Tabs and scrolling to help popup by @AmmarAbouZor in #32 - Fixed: bugs in fragment creation by @kevinmatthes in #33 - Added: Multi-selection for journals by @AmmarAbouZor in #34 - Changed: bump baptiste0928/cargo-install to v2.1.0 by @kevinmatthes in #36 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #37 - Added: Export Import functions for multiple journals by @AmmarAbouZor in #39 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #40 - Fixed: Synchronizing problems with sqlite back-end by @AmmarAbouZor in #41 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #42 - Changed: improve GHA linting speed dramatically by @kevinmatthes in #43 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #44 - Addd: Option to Use Git Configured Editor as External editor by @AmmarAbouZor in #45 - [Aeruginous] Create CHANGELOG Fragment by @github-actions in #46 - [Aeruginous] Create Missing CHANGELOG Fragments by @AmmarAbouZor in #48 - Chore: Add dependabot by @AmmarAbouZor in #50 - [Aeruginous] Assemble CHANGELOG by @github-actions in #52
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Jun 16, 2023
1.2.1 - 03/30/2022 ------------------ - make the pyproject.toml fully PEP 621 compliant PR #19 1.2.0 - 03/11/2022 ------------------ - expose a build_ext subclass that can be re-used in other projects PR #16 - use a PEP 517 compatible install procedure PR #16 - do not access directly ob_type on PyObject use Py_TYPE
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Jul 19, 2023
feat: put arguments in argument_list node feat: put the body of commands into a body node refactor: use C for the external scanner (#16)
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Jul 22, 2023
Version 3.3.0, November 19 2021 * Added the --check option to check whether files would change if run again, for use in continuous integration scenarios. Version 3.2.0, November 7 2021 * Added the -P option to use print() instead of cog.outl() for code output. Version 3.1.0, August 31 2021 * Fix a problem with Python 3.8.10 and 3.9.5 that require absolute paths in sys.path (issue #16). * Python 3.9 and 3.10 are supported. Version 3.0.0, April 2 2019 * Dropped support for Pythons 2.6, 3.3, and 3.4. * Errors occurring during content generation now print accurate tracebacks, showing the correct filename, line number, and source line. * Cog can now (again?) be run as just “cog” on the command line. * The -p PROLOGUE option was added to specify Python text to prepend to embedded code. Thanks, Anders Hovmöller. * Wildcards in command line arguments will be expanded by cog to help on Windows. Thanks, Hugh Perkins. * When using implicitly imported "cog", a new module is made for each run. This is important when using the cog API multi-threaded. Thanks, Daniel Murdin. * Moved development to GitHub.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Aug 25, 2023
Upstream changes:
version 3.013: Sat 24 Jun 17:25:11 CEST 2023
Changes:
- In header lines, leave the actual white-space related to FWS
intact. You may want to add s/\t/ / before you print a header.
GitHub#7 [Jacob Balazer]
- When the comment in an address has no closing ')', do consume
the whole remaining line, not fail parsing.
GitHub#6 [Jacob Balazer]
- When the charset of a ::Body is not specified, a real attempt is
made to autodetect the best setting. For reading, constructing,
and writing bodies. GitHub#12 [Jacob Balazer]
** This may change the output of your regression tests: previously,
the default interpretation was 'us-ascii' for reading and 'utf-8'
for writing.
Fixes:
- ::Field::Full consumePhrase() should take minimal encoded
phrase [Jonas Ryssel]
- ::Field::Address overloaded cmp() used 'eq' where it should
have been 'cmp'
- partNumber when the multipart parent is a nested [Geoffrey Bennett]
- ::Body::Multipart, even when there is only a single \n after the
trailing boundery, then there is a epilogue.
github issue #16 [Jacob Balazer]
Improvements:
- run regression-tests with MIME::Entity on devel system.
- ::Body->decode autodects missing charset.
- The ability to set the charset detector via ::Body::Encode
method charsetDetectAlgorithm()
- New release of User::Identity
- When the message/rfc822 and has Content-Transfer-Encoding, then do
not parse it as "nested" but as normal part.
github issue #17 [Todd Richmond]
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Aug 31, 2023
Upstream changes:
version 3.013: Sat 24 Jun 17:25:11 CEST 2023
Changes:
- In header lines, leave the actual white-space related to FWS
intact. You may want to add s/\t/ / before you print a header.
GitHub#7 [Jacob Balazer]
- When the comment in an address has no closing ')', do consume
the whole remaining line, not fail parsing.
GitHub#6 [Jacob Balazer]
- When the charset of a ::Body is not specified, a real attempt is
made to autodetect the best setting. For reading, constructing,
and writing bodies. GitHub#12 [Jacob Balazer]
** This may change the output of your regression tests: previously,
the default interpretation was 'us-ascii' for reading and 'utf-8'
for writing.
Fixes:
- ::Field::Full consumePhrase() should take minimal encoded
phrase [Jonas Ryssel]
- ::Field::Address overloaded cmp() used 'eq' where it should
have been 'cmp'
- partNumber when the multipart parent is a nested [Geoffrey Bennett]
- ::Body::Multipart, even when there is only a single \n after the
trailing boundery, then there is a epilogue.
github issue #16 [Jacob Balazer]
Improvements:
- run regression-tests with MIME::Entity on devel system.
- ::Body->decode autodects missing charset.
- The ability to set the charset detector via ::Body::Encode
method charsetDetectAlgorithm()
- New release of User::Identity
- When the message/rfc822 and has Content-Transfer-Encoding, then do
not parse it as "nested" but as normal part.
github issue #17 [Todd Richmond]
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Aug 31, 2023
0.0.3 (2023-08-14) * Land #13, Add github actions and address deprecation warnings * Land #14, Update Ubuntu version & Ruby setup * Land #17, Update github actions runner version * Land #19 , Update gemspec file ignore list * Land #20, Bump version to 0.0.3 0.0.4 (2023-08-17) * Land #16, Add custom error class and improve error messages * Land #21, Add development documentation * Land #22, Bump version to 0.0.4
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 10, 2023
v0.1.10 What's Changed - Added -o (print once) flag, fix Cargo.toml categories flag by @Kyllingene in #18 v0.1.9 What's Changed - Use u8::wrapping_* instead of *_u8, add gitignore by @Kyllingene in #15 - 12-hour clock modes by @Kyllingene in #16 v0.1.8 - no release
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 27, 2023
0.2.0.2 - 2023-06-12, Alexey Radkov and Andreas Abel * Support Haiku OS by including libnetwork in configure script. (PR #23.) 0.2.0.1 - 2023-03-31, Alexey Radkov and Andreas Abel * Fix 0.2.0.0: Ship updated configure script. 0.2.0.0 - 2023-03-31, Alexey Radkov and Andreas Abel * Bump bytestring to >= 0.10 for correct IsString ByteString instance. (PR #16.) * Fix memory leaks due to missing res_nclose() after each res_ninit() call. (PR #12.) * Check the value of h_errno on failures of res_nquery() and throw an appropriate exception of type DnsException built with one of new constructors DnsHostNotFound, DnsNoData, DnsNoRecovery, or DnsTryAgain. Note that previously such exceptions were thrown by fail and had type IOError. (PR #17.) * Suppress configure warning on option --with-compiler passed by Cabal. (PR #21.) * Tested with GHC 8.0 - 9.6.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Nov 13, 2023
- version 0.12.0 * #17: Add the ability to place Armies with the mouse wheel * [bug #16] Fix the client-side deadlock when the server shuts down and the client tries to reconnect. * introduction of a new code style * removal of unused code * lots of refactorings - version 0.11.2 Mar 13 2007 [bug 1634385] Updated french translation (by Cyril Brulebois) [bug 1628790] Updated spanish translation (by Carlos Galisteo) Apr 02 2006 Change Metaserver address to teg.game-server.cc Mar 16 2006 Fix for remote DoS (CAN-2006-1150) found by Luigi Auriemma <[email protected]> Updated the spec file for Suse Linux 10.0 Mar 14 2006 [bug 991399] Premature victory after surrender fixed Increased dialog width (German text did not fit inside) Switched boards from png to jpg to save space for theme (~400kB per theme) Minor fixes Mon Mar 13 2006 Fix for crash in tegrobot when placing more than 50 armies Mar 09 2006 [bug 1307267] Fixed typo in Spanish translation [bug 1107661] Fixed missing detail about getting new cards [bug 1107636] Regroup dialog pops up only if selected Many typos in German translation fixed Many minor fixes Jan 1 2006 Remake of "sentimental" theme Dec 20 2005 Galician translation by Nacho Resa Apr 24 2005 Switch from autoconf 2.13 to 2.5 Switch from automake 1.4 to 1.8 Aug 4 2004 Hungarian translation by Lenart Janos <[email protected]> Aug 4, 2004 Applied Josef Spillner patches to make it compatible with new ggz scoring. Added Hungarian translation by Lenart Janos <[email protected]>
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Dec 17, 2023
5.0.0 (2023-01-02) Added * [JavaScript] Support for EcmaScript modules (aka ESM). (#5) * [Java] Enabled reproducible builds Changed * Only allow escape character \ in front of (, ), \ or whitespace. Throw error otherwise. (#17) Fixed * [Perl] Fixed missing dependency as well as new syntax in the tests (cucumber/tag-expressions#15 ehuelsmann) * Document escaping. (#16, #17) * [Ruby], [Perl] Empty expression evaluates to true * [Go] Fix module name (#82) 5.0.1 (2023-01-03) Fixed * [Java] Fix scm and project urls 5.0.2 (2023-07-15) Added * [Python] Make tests pass against shared test data (except: backslash-escaped) (#18 by jenisys) Fixed * [All] Not.to_string() conversion has unneeded double-parenthesis if binary operator is contained (#94 by jenisys) 5.0.3 (2023-08-10) Fixed * [Perl] Fixed CPAN upload in release process (by ehuelsmann) 5.0.4 (2023-08-10) Fixed * [Perl] Corrected working directory for CPAN upload action (by ehuelsmann) 5.0.5 (2023-08-11) Fixed * [Perl] Fixed inclusion of CHANGELOG.md causing release to fail (by ehuelsmann) 5.0.6 (2023-08-13) Fixed * [Perl] Fixed test failures when running tests out-of-tree by resticting testdata based tests to run in development only (by ehuelsmann) 6.0.0 (2023-10-13) Added * [Ruby] Initial rubocop gems and basic compliance added (More work to come) (#133) Changed * [Ruby] Minimum ruby version is now bumped from 1.9 to 2.3 (#133) Fixed * [Perl] Include README.md and LICENSE in the release tarball (by ehuelsmann)
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Dec 28, 2023
v1.0.0 Features - Commands can now specify pre-commands and post-commands that are run before/after the specified command. (#3) (documentation) - The default origin remote name can now be configured using tree.<tree>.default-remote. (#16) - Commands now display the tree's current branch alongside the tree name. (#18) - garden -vv exec and garden -vv shell now display the command being run. Packaging: - garden can now be installed as a nix flake package. A flake.nix file is now provided. (#16)
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Feb 7, 2024
2.78.1 (stable): Glib: * Dispatcher: Allow destroy during emit (Kjell Ahlstedt) Issue #116 (PBS) gmmproc: * h2def.py: Make return types that are unsigned work. Required by gtkmm4, GdkDmabufTextureBuilder (Kjell Ahlstedt) Build: * Meson build: Don't fail if warning_level=everything (Daniel Boles, Kjell Ahlstedt) Merge request gtkmm!87 * MSVC, NMake: Make dep paths configurable (Chun-wei Fan) 2.78.0 (stable): Glib: * ustring: Add a std::hash<> specialization Not included by #include <glibmm.h>. Activate with #include <glibmm/ustring_hash.h>. (Kjell Ahlstedt) Issue #16 (Murray Cumming), merge request !61 2.77.0 (unstable): Glib, Gio: * Use callback functions with C linkage (Kjell Ahlstedt) Issue #1 (Murray Cumming) Glib: * Add create_variant() (Kjell Ahlstedt) Issue #109 (ilya-fedin) * Add VariantBase::get_dynamic() (Kjell Ahlstedt) Issue #110 (ilya-fedin) * Variant: Provide Variant<long long> whenever possible (Kjell Ahlstedt) Issue #111 (ilya-fedin) * VariantContainerBase: Add a const version of get_child() and deprecate the non-const version (Kjell Ahlstedt) Issue #112 (ilya-fedin) * Add DBusHandle and Variant<DBusHandle> (Kjell Ahlstedt) Issue #113 (ilya-fedin) * ustring: Add truncate_middle() (Kjell Ahlstedt) Gio: * Add Subprocess and SubprocessLauncher (Kjell Ahlstedt) Issue #106 (ilya-fedin) * Resolver: Add set/get/property_timeout() (Kjell Ahlstedt) Documentation: * Gio::File: Fix various spelling errors (Daniel Boles) * Remove AUTHORS and README.SUN; add info to README.md (Kjell Ahlstedt) Issue gtkmm#140 gmmproc: * Generate callback functions with C linkage (Kjell Ahlstedt) Issue #1 (Murray Cumming) Examples: * Add subprocess example (Kjell Ahlstedt) Issue #106 (ilya-fedin) Tests: * Giomm tests: Test for /etc/passwd instead of /etc/fstab (Jeremy Bicha) Merge request !60 Build: * Require glib-2.0 >= 2.77.0 * Autotools build: Don't include config.h in ustring.cc (Kjell Ahlstedt) 2.76.0 (stable): Glib: * Dispatcher: Don't warn when a Dispatcher is deleted while messages are pending. (Kjell Ahlstedt) Issue #108 (PBS) * Dispatcher: Add const versions of emit() and operator()() and deprecate the non-const versions. (Kjell Ahlstedt) Issue #103 (PBS) Gio: * ListModel: Add get_typed_object() (Kjell Ahlstedt) See issue gtkmm#132 2.75.0 (unstable): Glib: * Module: Deprecate build_path() * Binding: Fix the bind_property() with two transformation functions * Add the GLIBMM_CHECK_VERSION() preprocessor macro (Kjell Ahlstedt) Gio: * NetworkMonitor::get_default(): Add refreturn (Kjell Ahlstedt) Issue #104 (ilya-fedin) * AppInfo: Add get_[recommended|fallback]_for_type() (Kjell Ahlstedt) Issue #105 (ilya-fedin) * Add BytesIcon (Kjell Ahlstedt) Issue #107 (ilya-fedin) * ListStore: Rename a local variable (Chun-wei Fan) Merge request !59 * Settings: Add bind() with mapping functions and unbind() (Kjell Ahlstedt) Documentation: * Glib::Binding::unbind(): Fix documentation (Kjell Ahlstedt) gmmproc: * generate_wrap_init.pl.in: Disable warning C4273 on Visual Studio (Chun-wei Fan) Merge request !57 Tests: * Fix giomm_simple test on Windows (Chun-wei Fan) Merge request !58 Meson build: * Detect if we build from a git subtree (William Roy) Merge request gtkmm!72 (Kjell Ahlstedt) Issue gtkmm#131 (William Roy) * Don't copy files with configure_file() (Kjell Ahlstedt) 2.74.0 (stable): Gio: * ListStore: Add find() * File: Add create_tmp() (Kjell Ahlstedt) Documentation: * File: Document create_for_parse_name() (Kjell Ahlstedt) 2.73.2 (unstable): Glib: * ustring: Add release() (Kjell Ahlstedt) Issue #101 (PBS) Gio: * ListStore: Don't derive a gtkmm__GListStore GType (Kjell Ahlstedt) Issue glib#2661 * DBus::Proxy: get_connection(), get_interface_info(): Add refreturn (Kjell Ahlstedt) Issue #102 (우정모) * AppInfo: Add get_default_for_type_async/finish(), get_default_for_uri_scheme_async/finish() * File: Add make_symbolic_link_async/finish() * ListStore: Add property_n_items() * Resolver: Add lookup_by_name_with_flags(), lookup_by_name_with_flags_async/finish() (Kjell Ahlstedt) Documentation: * Glib::RefPtr: Improve the documentation (Kjell Ahlstedt) Issue gtkmm#119 (David Marceau) * Gio::Action: Improve the documentation (Kjell Ahlstedt) Issue #100 (Diederik van Lierop) gmmproc: * Improved handling of final types (Kjell Ahlstedt) Issue glib#2661 * Improve handling of gi-docgen syntax in C documentation (Kjell Ahlstedt) Build: * Meson build: Avoid unnecessary configuration warnings (Kjell Ahlstedt) * Meson/MSVC: Add more warnings to ignore (Chun-wei Fan) * NMake Makefiles: Ensure g[lib|io]mm[config.h|.rc] are created (Chun-wei Fan) Issue #99 (Martin Ammermüller) * Require glib-2.0 >= 2.73.2 (Kjell Ahlstedt) 2.72.1 (stable): Glib: * ustring_Iterator: Don't declare copy constructor =default. A fix in the 2.72.0 release broke ABI. (Kjell Ahlstedt) Issue #98 (Scotty Trees) 2.72.0 (stable): Glib: * MainContext: Add create(MainContextFlags flags) (Kjell Ahlstedt) Gio: * Add AppInfoMonitor (Kjell Ahlstedt, technic93) Issue #97 * DBus::Proxy: signal_signal() accepts a signal name * File: Add move_async() and move_finish() * SocketClient: Deprecate set/get/property_tls_validation_flags() * TlsCertificate: Add properties private_key, private_key_pem, pkcs11_uri, private_key_pkcs11_uri. Fix the create*() methods. * TlsClientConnection.hg: Deprecate set/get/property_validation_flags() (Kjell Ahlstedt) gmmproc: * Add "ignore_deprecations" argument in _WRAP_METHOD() (Kjell Ahlstedt) Build: * Require glib-2.0 >= 2.71.2 (Kjell Ahlstedt) * MSVC build: Support VS2022 builds (Chun-wei Fan) * Meson build: Specify 'check' option in run_command() Require Meson >= 0.55.0 (Kjell Ahlstedt) 2.70.0 (stable): Glib: * Timer: Add resume() and is_active() (Kjell Ahlstedt) Issue #87 (chamignoom) * Add the Environ class (Kjell Ahlstedt) Issue #89 (Alexander Shaduri) * Binding: Add dup_source(), dup_target(). Deprecate get_source(), get_target(). TimeZone: Add operator bool(), create_identifier(). Deprecate create(). (Kjell Ahlstedt) Gio: * FileInfo: Add get/set_access_date(), get/set_creation_date(). Notification: Add set_category(). TlsCertificate: Add property/get_not_valid_before(), property/get_not_valid_after(), property/get_subject_name(), property/get_issuer_name(). TlsConnection: Add property/get_protocol_version(), property/get_ciphersuite_name(). (Kjell Ahlstedt) Tests: * Add test of Glib::Environ (Kjell Ahlstedt) Issue #89 (Alexander Shaduri) gmmproc: * Handle gi-docgen syntax in C documentation (Kjell Ahlstedt) Build: * Require glib-2.0 >= 2.69.1 (Kjell Ahlstedt) 2.68.2 (stable): Glib: * Replace all g_quark_from_static_string() by g_quark_from_string() (Kjell Ahlstedt) Issue #96 (小太) Gio: * FileEnumerator: Remove refreturn to avoid memory leak (talisein) Merge request !53 * ListModel::get_object(): Make it work for interface classes (Kjell Ahlstedt) Issue #93 (pumkinpal) * AppInfo::get_all(): Avoid a crash on Windows (Kjell Ahlstedt) Issue #94 (Lawrence37) Build: * MSVC build: Remove extraneous GLIBMM_API in Glib::ustring (Kjell Ahlstedt) Issue #92 (Christoph Reiter)
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Feb 24, 2024
1.12.0 (2024-01-16) * feature: add sqlite3 driver #18 * feature: add lastId() method on mysql, mysqli and sqlite3 #19 #21 * task: fix prototypes for PHP 8 #12 * task: Try and fix test by removing each #16 * task: PHP8.1 Compatability restore error handling to previous state whilst ... #13 * task: DB::apiVersion() should be declared as static #17 * task: Fix PHP8.2 Deprecated use of ${var} instead of {$var} #14 * task: PHP8.2 ready #21 * task: Mark mssql-Driver, mysql-Driver and sybase-Driver as Deprecated #21 * bug: PHP 8.0 testcase failure #23 #24 1.12.1 (2024-01-17) * bug: Missing new file in package.xml #25 * bug: Minimal fix for sqlite3 #26
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Apr 29, 2024
Upstream changes:
version 3.015: Mon 11 Dec 09:58:17 CET 2023
Fixes:
- accept empty fields without complaint. [Andy Beverley]
- fix counting epilogue trailing blank [Gregor Herrmann] GitHub#18, RT#150141
version 3.014: Wed 18 Oct 12:16:55 CEST 2023
Changes:
- handle utf8 in address phrases, according to RFC5335 (since
2008 experimental) May show some changes in your regression
tests. [Andy Beverley]
Fixes:
- epilogue starter test needs ^ anchor
github issue #16 [Jacob Balazer]
- existing preamble should keep at least one empty string to
indicate its existence.
github issue #18 [Jacob Balazer]
- clean error when field names are too long w.r.t. the fold
wrap. Found by [Raphaël Gertz]
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Apr 29, 2024
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Jun 4, 2024
- Unified all text input fields to have consistent behavior - reduced default toast duration - fixed visual bugs where theme background colors did not match inactive state color - fixed not getting an error when trying to go down when already at the last card in a board - added shortcuts to change card priority - removed unnecessary manual string implementations (used strum) - fixed reset password not working - appropriate error for invalid credentials while logging in - added future goals for the project in README - bump deps - fixes #16 and #17
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Jun 27, 2024
### 1.8.10 - 15 June 2024 * feature: new "`--output`" option to write to a file instead of standard output (pull request [#90](https://codeberg.org/a-j-wood/pv/pulls/90)) supplied by [xmort](https://codeberg.org/xmort) ### 1.8.9 - 21 April 2024 * feature: new "`--si`" option to display and interpret size suffixes in multiples of 1000 rather than 1024 (pull request [#85](https://codeberg.org/a-j-wood/pv/pulls/85)) supplied by [kevinruddy](https://codeberg.org/kevinruddy) * fix: continue producing progress output when the output is blocking writes ([#34](https://codeberg.org/a-j-wood/pv/issues/34), [#86](https://codeberg.org/a-j-wood/pv/issues/86), [#87](https://codeberg.org/a-j-wood/pv/issues/87)) * fix: honour the _TMPDIR_ / _TMP_ environment variables again, rather than hard-coding "`/tmp`", when using a terminal lock file (originally removed in 1.8.0) ([#88](https://codeberg.org/a-j-wood/pv/issues/88)) * i18n: corrections and missing strings added to French translations (pull request [#83](https://codeberg.org/a-j-wood/pv/pulls/83)) supplied by [Thomas Bertels](https://codeberg.org/tbertels) ### 1.8.5 - 19 November 2023 * fix: corrected percentage formatting so it doesn't jump from 2 to 3 characters wide at 100% ([#80](https://codeberg.org/a-j-wood/pv/issues/80)) * fix: replaced "`--remote`" mechanism, using a temporary file instead of SysV IPC, so it can work reliably even when there are multiple PV instances * fix: corrected compilation failure when without IPC support * security: addressed all issues highlighted by the software auditing tools "`splint`" and "`flawfinder`" (see "`make analyse`") ([#77](https://codeberg.org/a-j-wood/pv/issues/77)) * cleanup: compilation warnings fixed on non-IPC and MacOS systems ### 1.8.0 - 24 September 2023 #### Features * feature: new "`--discard`" option to discard input as if writing to */dev/null* ([#42](https://codeberg.org/a-j-wood/pv/issues/42)) * feature: new "`--error-skip-block`" option to make "`--skip-errors`" skip whole blocks ([#37](https://codeberg.org/a-j-wood/pv/issues/37)) * feature: use `posix_fadvise()` like `cat`(1) does, to improve efficiency ([#39](https://codeberg.org/a-j-wood/pv/issues/39)) * feature: new "`--enable-static`" option to "`configure`" for static builds ([#75](https://codeberg.org/a-j-wood/pv/pull/75)) #### Security * security: with "`--pidfile`", write to a temporary file and rename it into place, to improve security * security: keep self-contained copies of name and format string in PV internal state for memory safety * security: ignore _TMP_ / _TMPDIR_ environment variables when using a terminal lock file #### Fixes * fix: only report errors about missing files when starting to transfer from them, not while calculating size, and behave more like `cat`(1) by skipping them and moving on * fix: auto-calculate total line count with "`--line-mode`" when all inputs are regular files * fix: use `clock_gettime()` in ETA calculation to cope with machine suspend/resume ([#13](https://codeberg.org/a-j-wood/pv/issues/13)) * fix: if "`--width`" or "`--height`" were provided, do not change them when the window size changes ([#36](https://codeberg.org/a-j-wood/pv/issues/36)) * fix: when a file descriptor position in "`--watchfd`" moves backwards, show the rate using the correct prefix ([#41](https://codeberg.org/a-j-wood/pv/issues/41)) * fix: rewrite terminal state save/restore so state is not intermittently garbled on exit when using "`--cursor`" ([#20](https://codeberg.org/a-j-wood/pv/issues/20)), ([#24](https://codeberg.org/a-j-wood/pv/issues/24)) #### Cleanups * cleanup: addressed many potential issues highlighted by the software auditing tools "`splint`" and "`flawfinder`" (see new target "`make analyse`") * cleanup: switched the build system to GNU Automake * cleanup: replaced the test harness with the one native to GNU Automake * cleanup: added a test for terminal width detection to "`make check`" * cleanup: added a test to "`make check`" to ensure that "`make install`" installs everything expected * cleanup: replaced *AC_HEADER_TIOCGWINSZ* with *AC_CHECK_HEADERS(sys/ioctl.h)* for better MacOS compatibility ([#74](https://codeberg.org/a-j-wood/pv/issues/74)) * cleanup: with "`--sync`", call `fsync()` instead of `fdatasync()` on incapable systems ([#73](https://codeberg.org/a-j-wood/pv/issues/73)) * cleanup: the manual is now a static file instead of needing to be built with "`configure`" #### Dropped items * dropped: dropped support for "`--enable-static-nls`" * dropped: removed the Linux Software Map file, as the LSM project appears to be long dead * dropped: will no longer publish to SourceForge as it has a chequered history and is unnecessary * dropped: removed project from GitHub and moved to Codeberg - see "[Give Up GitHub](https://giveupgithub.org/)" #### Other items * licensing change from Artistic 2.0 to GPLv3+ ### 1.7.24 - 30 July 2023 * fix: correct terminal size detection, broken in 1.7.17 by the configuration script rewrite ([#72](https://codeberg.org/a-j-wood/pv/issues/72)) * security: removed *DEBUG* environment variable in debug mode, added "`--debug`" instead * cleanup: added "`make analyse`" to run "`splint`" and "`flawfinder`" on all source files * cleanup: corrected detection of boolean capability * cleanup: word wrapping of "`--help`" output is now multi-byte locale aware * cleanup: adjusted "`indent`" rules to line length of 120 and reformatted code ### 1.7.18 - 28 July 2023 * fix: language file installation had been broken by the configuration script rewrite ### 1.7.17 - 27 July 2023 * feature: new "`--sync`" option to flush cache to disk after every write (related to [#6](https://codeberg.org/a-j-wood/pv/issues/6), to improve accuracy when writing to slow disks) * feature: new "`--direct-io`" option to bypass cache - implements [#29 "Option to enable *O_DIRECT*"](https://codeberg.org/a-j-wood/pv/issues/29) - requested by Romain Kang, Jacek Wielemborek * fix: correct byte prefix size to 2 spaces in rate display, so progress display size remains constant at low transfer rates * cleanup: rewrote `configure.in` as per suggestions in newer "`autoconf`" manuals * cleanup: replaced `header.in` with one generated by "`autoheader`", moving custom logic to a separate header file "`config-aux.h`" * cleanup: added copyright notice to all source files as per GNU standards * cleanup: changed "`--version`" output to conform to GNU standards * cleanup: replaced backticks with `$()` in all shell scripts that did not come from elsewhere, as backticks are deprecated and harder to read * cleanup: improved the output formatting of "`make test`" * cleanup: extended the "`make test`" mechanism to allow certain tests to be skipped on platforms that cannot support them * cleanup: skip the "pipe" test (for *SIGPIPE*) if GNU "`head`" is not available, so that "`make test`" on stock OpenBSD 7.3 works * cleanup: added a lot more tests to "`make test`" * cleanup: replace all calls to `sprintf()` and `snprintf()` with a new wrapper function `pv_snprintf()` to improve security and compatibility * cleanup: replace all calls to `strcat()` with a wrapper `pv_strlcat()` to improve security and compatibility * cleanup: replace all `write()` calls to the terminal with a wrapper `pv_write_retry()` for consistency * cleanup: tidy up and fix compilation warning in "`--watchfd`" code * cleanup: rewrote all local shell scripts to pass analysis by [ShellCheck](https://www.shellcheck.net) ### 1.7.0 - 17 July 2023 * dropped: support for Red Hat Enterprise Linux and its derivatives has been dropped; removed the RPM spec file, and will no longer build binaries * feature: the "`--size`" option now accepts "`@filename`" to use the size of another file (pull request [#57](https://codeberg.org/a-j-wood/pv/pull/57) supplied by [Dave Beckett](https://github.com/dajobe)) * feature: the "`--watchfd`" option is now available on OS X (pull request [#60](https://codeberg.org/a-j-wood/pv/pull/60) supplied by [christoph-zededa](https://github.com/christoph-zededa)) * feature: new "`--bits`" option to show bit count instead of byte count (adapted from pull request [#63](https://codeberg.org/a-j-wood/pv/pull/63) supplied by [Nick Black](https://nick-black.com)) * feature: new "`--average-rate-window`" option, to set the window over which the average rate is calculated, also used for ETA (modified from pull request [#65](https://codeberg.org/a-j-wood/pv/pull/65) supplied by [lemonsqueeze](https://github.com/lemonsqueeze)) * feature: the "`--watchfd`" option will now show relative filenames, if they are under the current directory (pull request [#66](https://codeberg.org/a-j-wood/pv/pull/66) supplied by [ikasty](https://github.com/ikasty)) * fix: correction to `pv_in_foreground()` to behave as its comment block says it should, when not on a terminal - corrects [#19 "No output in Arch Linux initcpio after 1.6.6"](https://codeberg.org/a-j-wood/pv/issues/19), [#31 "No output written from inside zsh <() construct"](https://codeberg.org/a-j-wood/pv/issues/31), [#55 "pv Stopped Working in the Background"](https://codeberg.org/a-j-wood/pv/issues/55) (pull request [#64](https://codeberg.org/a-j-wood/pv/pull/64) supplied by [Michael Weiß](https://github.com/quitschbo)) * fix: workaround for OS X 11 behaviour in configure script regarding stat64 at compile time (pull request [#57](https://codeberg.org/a-j-wood/pv/pull/57) supplied by [Dave Beckett](https://github.com/dajobe)) * fix: workaround for macOS equivalence of stat to stat64 - patches from [Filippo Valsorda](https://github.com/FiloSottile) and [Demitri Muna](https://github.com/demitri), correcting [#33 "Fix compilation problems due to `stat64()` on Apple Silicon"](https://codeberg.org/a-j-wood/pv/issues/33) * fix: add burst rate limit to transfer, so rate limits are not broken by bursty traffic (pull request [#62](https://codeberg.org/a-j-wood/pv/pull/62) supplied by [Volodymyr Bychkovyak](https://github.com/vbychkoviak)) * fix: corrected "`--force`" option so it will still output progress when not in the same process group as the owner of the terminal - corrects [#23 "No output with "`-f`" when run in background after 1.6.6"](https://codeberg.org/a-j-wood/pv/issues/23) and helps to correct [#31 "No output written from inside zsh <() construct"](https://codeberg.org/a-j-wood/pv/issues/31) * fix: corrected elapsed time display to show as D:HH:MM:SS after 1 day, like the ETA does - corrects [#16 "Show days in same format in ETA as in elapsed time"](https://codeberg.org/a-j-wood/pv/issues/16) * fix: corrected bug where percentages went down after 100% when in "`--numeric`" mode with a "`--size`" that was too small - corrects [#26 "Correct "`-n`" behaviour when going past 100% of "`-s`" size"](https://codeberg.org/a-j-wood/pv/issues/26) * i18n: recoded Polish translation file to UTF-8 * i18n: removed inaccurate fuzzy translation matches * docs: moved all open issues into GitHub and updated the TODO list * docs: renamed README to README.md and altered it to Markdown format * docs: moved contributors from the README to docs/ACKNOWLEDGEMENTS.md * docs: moved TODO to TODO.md and altered it to Markdown format * docs: moved NEWS to NEWS.md, converted it to UTF-8, and altered it to Markdown format
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Jul 8, 2024
Upstream changes:
0.17 2024-06-13 rurban
- fix older aix with missing -lz dependencies (timlegge PR #16)
- minor ci fixes
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Jul 30, 2024
Upstream changes:
1.46 2023-07-01
- Reproduce Term::ReadLine::Stub’s behavior for ornaments (#17)
- The Perl debugger uses these control sequences for online help
- fetch the control sequences for outputting bold text as the
current Term::ReadLine does
- let new() fail on multiple instantiation (#16)
- suppress warning errors on clang
- add prototype on every function declaration
- use ANSI-C style port definition even for XS code
- make clean removes `*.dSYM` for macOS
- INSTALL.md: update content
- add install procedure using packages
- update and remove old descriptions
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Sep 23, 2024
2.2.0 (2024-09-16) What's Changed New Features * Add a #close implementation, calling #shutdown on any cached_connection by @olleolleolle in #23 * Support verify_hostname SSL option by @stefanmb in #25 Others * Adds Ruby 3.2 to the CI matrix by @petergoldstein in #16 * Fix linting on CI by @bquorning in #21 * CI: Add Ruby 3.3 by @olleolleolle in #20 * CI: use ruby/setup-ruby in the publish workflow by @olleolleolle in #22 New Contributors * @petergoldstein made their first contribution in #16 * @bquorning made their first contribution in #21 * @stefanmb made their first contribution in #25
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Oct 7, 2024
1.15 -- Wed Oct 02 07:45:07 ADT 2024
[Module Status]
Crypt::OpenPGP has a new maintainer. Current work is to merge past PRs that
are fairly simple to review and test. Other issues will be reviewed
as time permits.
[Changes since 1.12]
- Release of TRIAL 1.14 as production
- PR #15 - (@nielslaukens) Added UserAttribute class (unparsed)
- PR #16 - (@nielslaukens) Bugfix: allow multiple 'Preferred hash/compression algorithms'
- PR #17 - (@nielslaukens) Added UserAttribute class (unparsed)
- PR #18 - (@nielslaukens) Bugfix: parse notation data subpacket of Signature correctly
- PR #19 - (@nielslaukens) Support unknown algos
- Closed RT#53323: Failing on 64bit machines
- Fix RT#123452 Require at least one Random Source
- GH PR#29 (@andyjack) Add use strict to increase kwalitee
- GH PR#31 (@gozer) ElGamal: key's p can be a large integer, use Bigint
- GH PR#32 (@Shildus). Add support for SHA-2 (SHA-512, SHA-256,...) signatures verification
[Detailed Changelog]
- d23dc25 Fix the version regex in dist.ini
- 4acfd00 Add to .gitignore
- 2a6c65a Add note on Random Number Module requirements
- 46fbd15 Add back the number of tests
- 7ef4fda Added SubSignature with notation to test suite
- 451bd6e Added support for unknown key algorithms
- 548bb07 Added ECC public key to test suite
- 6e0c442 Use done testing instead of a test plan
- ac14115 Bugfix: parse notation data subpacket of Signature correctly
- ffa9e30 Added support for unparsed SubPackets
- 66897ea Added SubSignature packet to test suite
- a72137e Bugfix: allow multiple 'Preferred hash/compression algorithms'
- 50f9a30 Added UserAttribute class (unparsed)
- 26632de Added User Attribute test packet to test suite
- 9e7d578 Added test to run packets through a parse/save cycle
- 0727bbe RT#123452 Require at least one Random Source
- a30bc95 Closed RT#53323: Failing on 64bit machines
- 67c4ee9 Fix Bignum subtraction
- 8c21506 v1.13
- 04010a5 (tag: 1.13) Add some additional Dist::Zilla configuration
- 51ae276 Whitespace and alignment changes
- 17ad689 Add use strict to increase kwalitee
- 4221098 ElGamal: key's p can be a large integer, use Bigint
- f3f20a0 Add support for SHA-2 (SHA-512, SHA-256,...) signatures verification.
1.14 -- Tue Oct 01 18:53:32 ADT 2024
[Module Status]
Crypt::OpenPGP has a new maintainer. Current work is to merge past PRs that
are fairly simple to review and test. Other issues will be reviewed
as time permits.
@nielslaukens provided a number of PRs at https://github.com/btrott/Crypt-OpenPGP/pulls
- PR #15 - Added UserAttribute class (unparsed)
- PR #16 - Bugfix: allow multiple 'Preferred hash/compression algorithms'
- PR #17 - Added UserAttribute class (unparsed)
- PR #18 - Bugfix: parse notation data subpacket of Signature correctly
- PR #19 - Support unknown algos
- Closed RT#53323: Failing on 64bit machines
- Fix RT#123452 Require at least one Random Source
[Detailed Changelog]
- d23dc25 Fix the version regex in dist.ini
- 4acfd00 Add to .gitignore
- 2a6c65a Add note on Random Number Module requirements
- 46fbd15 Add back the number of tests
- 7ef4fda Added SubSignature with notation to test suite
- 451bd6e Added support for unknown key algorithms
- 548bb07 Added ECC public key to test suite
- 6e0c442 Use done testing instead of a test plan
- ac14115 Bugfix: parse notation data subpacket of Signature correctly
- ffa9e30 Added support for unparsed SubPackets
- 66897ea Added SubSignature packet to test suite
- a72137e Bugfix: allow multiple 'Preferred hash/compression algorithms'
- 50f9a30 Added UserAttribute class (unparsed)
- 26632de Added User Attribute test packet to test suite
- 9e7d578 Added test to run packets through a parse/save cycle
- 0727bbe RT#123452 Require at least one Random Source
- a30bc95 Closed RT#53323: Failing on 64bit machines
- 67c4ee9 Fix Bignum subtraction
1.13 -- Sun Sep 29 23:13:17 ADT 2024
[Module Status]
Crypt::OpenPGP has a new maintainer. Current work is to merge past PRs that
are fairly simple to review and test. Other issues will be reviewed
as time permits.
- GH PR#29 Add use strict to increase kwalitee
- GH PR#31 ElGamal: key's p can be a large integer, use Bigint
- GH PR#32 Add support for SHA-2 (SHA-512, SHA-256,...) signatures verification.
netbsd-srcmastr
pushed a commit
that referenced
this pull request
Nov 28, 2024
v0.2.9
What's Changed
Migrate to cargo workspaces and introduce github workflows by @triyanox in #14
feat: add directory indicator #11 by @triyanox in #15
chore: fix release workflow by @triyanox in #16
Merge pull request #16 from triyanox/chore/fix-release-workflow by @triyanox in #17
fix release workflow by @triyanox in #18
Merge pull request #18 from triyanox/chore/fix-release-workflow by @triyanox in #19
fix release workflow by @triyanox in #20
Merge pull request #20 from triyanox/chore/fix-release-workflow by @triyanox in #21
Fix release workflow by @triyanox in #22
chore: version crates by @triyanox in #23
chore: fix the syncing issue on the release workflow by @triyanox in #24
chore: fix version check by @triyanox in #25
chore: add explicit version for lla_plugin_interface by @triyanox in #26
chore: fix path for lla_plugin_interface by @triyanox in #27
v0.2.7
What's Changed
Add the config --set command to update the lla config by @triyanox in #13
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
this brings PHP 7.1 compatibility