Skip to content

Move tests to pytest #3

Move tests to pytest

Move tests to pytest #3

---
# This is the actual artifact build/release workflow. This workflow exists temporarily
# because GHA doesn't support a dynamic/conditional matrix. Ensure changes are synced with ci.yaml.
name: PyYAML CI
on:
push:
pull_request:
types: [opened, synchronize, reopened]
workflow_dispatch:
env:
LIBYAML_REPO: https://github.com/yaml/libyaml
LIBYAML_REF: 0.2.5
jobs:
python_sdist:
name: pyyaml sdist
runs-on: ubuntu-latest
steps:
- name: Checkout PyYAML
uses: actions/checkout@v3
- name: Install a python
uses: actions/setup-python@v4
with:
python-version: 3.x
- name: Build sdist
env:
PYYAML_FORCE_CYTHON: 1
PYYAML_FORCE_LIBYAML: 0
run: |
python -V
python -m pip install build
python -m build .
# Ensure exactly one artifact was produced.
[[ $(shopt -s nullglob; ls dist/*.tar.gz | wc -w) == 1 ]] || {
echo "Unexpected content in dist dir: '$(ls dist/*.tar.gz)'."
exit 1
}
- name: Test sdist
run: |
# Install some libyaml headers.
# TODO Should we smoke test the sdist against the libyaml we built?
sudo apt update
sudo apt install libyaml-dev -y
# Ensure Cython is not present so we use only what's in the sdist.
python -m pip uninstall Cython -y || true
# Pass no extra args.
# We should auto-install with libyaml since it's present.
python -m pip install dist/*.tar.gz -v
python packaging/build/smoketest.py
- name: Upload sdist artifact
uses: actions/upload-artifact@v3
with:
name: dist
path: dist/*.tar.gz
linux_libyaml:
name: libyaml ${{matrix.cfg.arch}} ${{matrix.cfg.platform}}
runs-on: ubuntu-latest
strategy:
matrix:
cfg:
- { platform: manylinux1, arch: x86_64 }
- { platform: manylinux2014, arch: x86_64 }
- { platform: manylinux2014, arch: aarch64 }
- { platform: manylinux2014, arch: s390x }
- { platform: musllinux_1_1, arch: x86_64 }
env:
DOCKER_IMAGE: quay.io/pypa/${{matrix.cfg.platform}}_${{matrix.cfg.arch}}
steps:
- name: Check cached libyaml state
id: cached_libyaml
uses: actions/cache@v3
with:
path: libyaml
key: libyaml_${{matrix.cfg.platform}}_${{matrix.cfg.arch}}_${{env.LIBYAML_REF}}
- name: configure docker foreign arch support
uses: docker/setup-qemu-action@v2
if: matrix.cfg.arch != 'x86_64' && steps.cached_libyaml.outputs.cache-hit != 'true'
- name: Checkout pyyaml
uses: actions/checkout@v3
if: steps.cached_libyaml.outputs.cache-hit != 'true'
- name: Build libyaml
run: >
docker run --rm
--volume "$(pwd):/io"
--env LIBYAML_REF
--env LIBYAML_REPO
--workdir /io
"$DOCKER_IMAGE"
/io/packaging/build/libyaml.sh
if: steps.cached_libyaml.outputs.cache-hit != 'true'
- name: ensure output is world readable (or cache fill fails with Permission Denied)
run: >
sudo chmod -R a+r ./libyaml/
if: steps.cached_libyaml.outputs.cache-hit != 'true'
linux_pyyaml:
needs: linux_libyaml
name: pyyaml ${{matrix.arch}} ${{matrix.platform}} ${{matrix.spec}}
runs-on: ubuntu-latest
strategy:
matrix:
include:
- { platform: manylinux1, arch: x86_64, spec: cp38 }
- { platform: manylinux1, arch: x86_64, spec: cp39 }
- { platform: manylinux2014, arch: x86_64, spec: cp310 }
- { platform: manylinux2014, arch: x86_64, spec: cp311 }
- { platform: manylinux2014, arch: x86_64, spec: cp312 }
- { platform: manylinux2014, arch: aarch64, spec: cp38 }
- { platform: manylinux2014, arch: aarch64, spec: cp39 }
- { platform: manylinux2014, arch: aarch64, spec: cp310 }
- { platform: manylinux2014, arch: aarch64, spec: cp311 }
- { platform: manylinux2014, arch: aarch64, spec: cp312 }
- { platform: manylinux2014, arch: s390x, spec: cp38 }
- { platform: manylinux2014, arch: s390x, spec: cp39 }
- { platform: manylinux2014, arch: s390x, spec: cp310 }
- { platform: manylinux2014, arch: s390x, spec: cp311 }
- { platform: manylinux2014, arch: s390x, spec: cp312 }
- { platform: musllinux_1_1, arch: x86_64, spec: cp38 }
- { platform: musllinux_1_1, arch: x86_64, spec: cp39 }
- { platform: musllinux_1_1, arch: x86_64, spec: cp310 }
- { platform: musllinux_1_1, arch: x86_64, spec: cp311 }
- { platform: musllinux_1_1, arch: x86_64, spec: cp312 }
steps:
- name: Checkout PyYAML
uses: actions/checkout@v3
- name: Fetch cached libyaml
id: cached_libyaml
uses: actions/cache/restore@v3
with:
path: libyaml
key: libyaml_${{matrix.platform}}_${{matrix.arch}}_${{env.LIBYAML_REF}}
fail-on-cache-miss: true
- name: configure docker foreign arch support
uses: docker/setup-qemu-action@v2
if: matrix.arch != 'x86_64'
- name: Build/Test/Package
env:
CIBW_ARCHS: all
# HACK: ick, maybe deconstruct the matrix a bit or query cibuildwheel for its default target *linux spec first?
CIBW_BUILD: ${{matrix.spec}}-${{ contains(matrix.platform, 'musllinux') && 'musllinux' || 'manylinux' }}_${{matrix.arch}}
CIBW_BUILD_VERBOSITY: 1
# containerized Linux builds require explicit CIBW_ENVIRONMENT
CIBW_ENVIRONMENT: >
C_INCLUDE_PATH=libyaml/include
LIBRARY_PATH=libyaml/src/.libs
LD_LIBRARY_PATH=libyaml/src/.libs
PYYAML_FORCE_CYTHON=1
PYYAML_FORCE_LIBYAML=1
CIBW_TEST_COMMAND: cd {project}; pytest
CIBW_TEST_REQUIRES: pytest
run: |
set -eux
python3 -V
python3 -m pip install -U --user cibuildwheel
python3 -m cibuildwheel --platform auto --output-dir dist .
- name: Upload artifacts
uses: actions/upload-artifact@v3
with:
name: dist
path: dist/*.whl
if-no-files-found: error
macos_libyaml:
name: libyaml macos ${{matrix.arch}}
strategy:
matrix:
include:
- arch: x86_64
- arch: arm64
runs_on: [self-hosted, macOS, arm64]
deployment_target: '11.0'
run_wrapper: arch -arm64 bash --noprofile --norc -eo pipefail {0}
sdkroot: macosx11.3
defaults:
run:
shell: ${{ matrix.run_wrapper || 'bash --noprofile --norc -eo pipefail {0}' }}
runs-on: ${{ matrix.runs_on || 'macos-11' }}
steps:
- name: Check cached libyaml state
id: cached_libyaml
uses: actions/cache@v3
with:
path: libyaml
key: libyaml_macos_${{matrix.arch}}_${{env.LIBYAML_REF}}
- name: Checkout PyYAML
uses: actions/checkout@v3
if: steps.cached_libyaml.outputs.cache-hit != 'true'
- name: Build libyaml
env:
MACOSX_DEPLOYMENT_TARGET: ${{ matrix.deployment_target || '10.9' }}
SDKROOT: ${{ matrix.sdkroot || 'macosx' }}
run: |
set -eux
brew install automake coreutils m4
bash ./packaging/build/libyaml.sh
echo "finished artifact arch is $(lipo -archs libyaml/src/.libs/libyaml.a)"
if: steps.cached_libyaml.outputs.cache-hit != 'true'
macos_pyyaml:
needs: macos_libyaml
name: pyyaml ${{ matrix.spec }}
runs-on: ${{ matrix.runs_on || 'macos-11' }}
defaults:
run:
shell: ${{ matrix.run_wrapper || 'bash --noprofile --norc -eo pipefail {0}' }}
strategy:
matrix:
include:
- spec: cp38-macosx_x86_64
cibw_version: cibuildwheel==2.11.1
- spec: cp39-macosx_x86_64
- spec: cp310-macosx_x86_64
- spec: cp311-macosx_x86_64
- spec: cp312-macosx_x86_64
# build for arm64 under a hacked macOS 12 self-hosted x86_64-on-arm64 runner until arm64 is fully supported
- spec: cp39-macosx_arm64
deployment_target: '11.0'
runs_on: [self-hosted, macOS, arm64]
arch: arm64
run_wrapper: arch -arm64 bash --noprofile --norc -eo pipefail {0}
sdkroot: macosx11.3
- spec: cp310-macosx_arm64
deployment_target: '11.0'
runs_on: [self-hosted, macOS, arm64]
arch: arm64
run_wrapper: arch -arm64 bash --noprofile --norc -eo pipefail {0}
sdkroot: macosx11.3
- spec: cp311-macosx_arm64
deployment_target: '11.0'
runs_on: [self-hosted, macOS, arm64]
arch: arm64
run_wrapper: arch -arm64 bash --noprofile --norc -eo pipefail {0}
sdkroot: macosx11.3
- spec: cp312-macosx_arm64
deployment_target: '11.0'
runs_on: [self-hosted, macOS, arm64]
arch: arm64
run_wrapper: arch -arm64 bash --noprofile --norc -eo pipefail {0}
sdkroot: macosx11.3
steps:
- name: Checkout PyYAML
uses: actions/checkout@v3
- name: Get cached libyaml state
id: cached_libyaml
uses: actions/cache/restore@v3
with:
path: libyaml
key: libyaml_macos_${{ matrix.arch || 'x86_64' }}_${{env.LIBYAML_REF}}
fail-on-cache-miss: true
- name: Build/Test/Package
env:
C_INCLUDE_PATH: libyaml/include
CIBW_BUILD: ${{matrix.spec}}
CIBW_BUILD_VERBOSITY: 1
CIBW_TEST_COMMAND: cd {project}; pytest
CIBW_TEST_REQUIRES: pytest
LIBRARY_PATH: libyaml/src/.libs
MACOSX_DEPLOYMENT_TARGET: ${{ matrix.deployment_target || '10.9' }}
PYYAML_FORCE_CYTHON: 1
PYYAML_FORCE_LIBYAML: 1
SDKROOT: ${{ matrix.sdkroot || 'macosx' }}
run: |
python3 -V
python3 -m pip install -U --user ${{ matrix.cibw_version || 'cibuildwheel' }}
python3 -m cibuildwheel --platform auto --output-dir dist .
- name: Upload artifacts
uses: actions/upload-artifact@v3
with:
name: dist
path: dist/*.whl
if-no-files-found: error
windows_libyaml:
name: libyaml ${{matrix.platform}} ${{matrix.arch}}
runs-on: ${{matrix.platform}}
strategy:
matrix:
include:
- platform: windows-2019
arch: x64
- platform: windows-2019
arch: win32
steps:
- name: Get cached libyaml state
id: cached_libyaml
uses: actions/cache@v3
with:
path: libyaml
key: libyaml_${{matrix.platform}}_${{matrix.arch}}_${{env.LIBYAML_REF}}
- name: Build libyaml
shell: bash
if: steps.cached_libyaml.outputs.cache-hit != 'true'
run: |
# git spews all over stderr unless we tell it not to
export GIT_REDIRECT_STDERR="2>&1"
if [[ ! -d ./libyaml ]]; then
git clone -b ${{ env.LIBYAML_REF }} ${{ env.LIBYAML_REPO }} 2>&1
fi
pushd libyaml
git clean -fdx
popd
mkdir libyaml/build
pushd libyaml/build
cmake.exe -G "Visual Studio 16 2019" -A ${{ matrix.arch }} -DYAML_STATIC_LIB_NAME=yaml ..
cmake.exe --build . --config Release
popd
windows_pyyaml:
needs: windows_libyaml
name: pyyaml ${{ matrix.platform }} ${{matrix.python_arch}} ${{matrix.spec}}
runs-on: ${{matrix.platform}}
strategy:
matrix:

Check failure on line 353 in .github/workflows/manual_artifact_build.yaml

View workflow run for this annotation

GitHub Actions / .github/workflows/manual_artifact_build.yaml

Invalid workflow file

You have an error in your yaml syntax on line 353
include:
spec: 3.8
- platform: windows-2019
build_arch: x64
python_arch: x64
spec: 3.9
- platform: windows-2019
build_arch: x64
python_arch: x64
spec: '3.10'
- platform: windows-2019
build_arch: x64
python_arch: x64
spec: '3.11'
- platform: windows-2019
build_arch: x64
python_arch: x64
spec: '3.12'
- platform: windows-2019
build_arch: win32
python_arch: x86
spec: 3.8
- platform: windows-2019
build_arch: win32
python_arch: x86
spec: 3.9
- platform: windows-2019
build_arch: win32
python_arch: x86
spec: '3.10'
- platform: windows-2019
build_arch: win32
python_arch: x86
spec: '3.11'
- platform: windows-2019
build_arch: win32
python_arch: x86
spec: '3.12'
steps:
# autocrlf screws up tests under Windows
- name: Set git to use LF
run: |
git config --global core.autocrlf false
git config --global core.eol lf
- name: Checkout pyyaml
uses: actions/checkout@v3
- name: Get cached libyaml state
id: cached_libyaml
uses: actions/cache/restore@v3
with:
path: libyaml
key: libyaml_${{matrix.platform}}_${{matrix.build_arch}}_${{env.LIBYAML_REF}}
fail-on-cache-miss: true
- name: Install python ${{ matrix.spec }}
uses: actions/setup-python@v4
with:
architecture: ${{ matrix.python_arch }}
python-version: ${{ matrix.spec }}
- name: Build/Test/Package
env:
PYYAML_FORCE_CYTHON: 1
PYYAML_FORCE_LIBYAML: 1
shell: bash
run: |
set -eux
python -V
python -m pip install "Cython<3.0" setuptools wheel
python setup.py \
--with-libyaml build_ext \
-I libyaml/include \
-L libyaml/build/Release \
-D YAML_DECLARE_STATIC \
build bdist_wheel
# run tests on built wheel
python -m pip install dist/*.whl pytest
python -I -m pytest
- name: Upload artifacts
uses: actions/upload-artifact@v3
with:
name: dist
path: dist/*.whl
if-no-files-found: error
...