Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

up #311

Closed
wants to merge 39 commits into from
Closed

up #311

wants to merge 39 commits into from

Conversation

shanmin
Copy link

@shanmin shanmin commented Aug 5, 2016

up

mrchapp pushed a commit to mrchapp/linux that referenced this pull request Apr 16, 2020
commit 987914a upstream.

After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.

This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.

The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
  CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ torvalds#311
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
  Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
  45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
  14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
  RSP: 0018:ffff88006586f980 EFLAGS: 00010207
  RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475
  RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c
  RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72
  R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30
  R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200
  FS: 00000000016fc880(0000) GS:ffff88006d000000(0000)
  knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  ? ib_copy_path_rec_from_user+0xcc0/0xcc0
  ? __mutex_unlock_slowpath+0xfc/0x670
  ? wait_for_completion+0x3b0/0x3b0
  ? ucma_query_route+0x818/0xc60
  ucma_query_route+0x818/0xc60
  ? ucma_listen+0x1b0/0x1b0
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  ? ucma_listen+0x1b0/0x1b0
  ? ucma_write+0x292/0x460
  ucma_write+0x292/0x460
  ? ucma_close_id+0x60/0x60
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  __vfs_write+0xf7/0x620
  ? ucma_close_id+0x60/0x60
  ? kernel_read+0x110/0x110
  ? time_hardirqs_on+0x19/0x580
  ? lock_acquire+0x18b/0x3a0
  ? finish_task_switch+0xf3/0x5d0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1be/0x5d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? security_file_permission+0x172/0x1e0
  vfs_write+0x192/0x460
  ksys_write+0xc6/0x1a0
  ? __ia32_sys_read+0xb0/0xb0
  ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
  ? do_syscall_64+0x1d/0x470
  do_syscall_64+0x9e/0x470
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3c86aa7 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
mrchapp pushed a commit to mrchapp/linux that referenced this pull request Apr 16, 2020
commit 987914a upstream.

After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.

This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.

The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
  CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ torvalds#311
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
  Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
  45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
  14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
  RSP: 0018:ffff88006586f980 EFLAGS: 00010207
  RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475
  RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c
  RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72
  R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30
  R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200
  FS: 00000000016fc880(0000) GS:ffff88006d000000(0000)
  knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  ? ib_copy_path_rec_from_user+0xcc0/0xcc0
  ? __mutex_unlock_slowpath+0xfc/0x670
  ? wait_for_completion+0x3b0/0x3b0
  ? ucma_query_route+0x818/0xc60
  ucma_query_route+0x818/0xc60
  ? ucma_listen+0x1b0/0x1b0
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  ? ucma_listen+0x1b0/0x1b0
  ? ucma_write+0x292/0x460
  ucma_write+0x292/0x460
  ? ucma_close_id+0x60/0x60
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  __vfs_write+0xf7/0x620
  ? ucma_close_id+0x60/0x60
  ? kernel_read+0x110/0x110
  ? time_hardirqs_on+0x19/0x580
  ? lock_acquire+0x18b/0x3a0
  ? finish_task_switch+0xf3/0x5d0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1be/0x5d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? security_file_permission+0x172/0x1e0
  vfs_write+0x192/0x460
  ksys_write+0xc6/0x1a0
  ? __ia32_sys_read+0xb0/0xb0
  ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
  ? do_syscall_64+0x1d/0x470
  do_syscall_64+0x9e/0x470
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3c86aa7 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
mrchapp pushed a commit to mrchapp/linux that referenced this pull request Apr 16, 2020
commit 987914a upstream.

After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.

This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.

The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
  CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ torvalds#311
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
  Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
  45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
  14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
  RSP: 0018:ffff88006586f980 EFLAGS: 00010207
  RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475
  RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c
  RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72
  R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30
  R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200
  FS: 00000000016fc880(0000) GS:ffff88006d000000(0000)
  knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  ? ib_copy_path_rec_from_user+0xcc0/0xcc0
  ? __mutex_unlock_slowpath+0xfc/0x670
  ? wait_for_completion+0x3b0/0x3b0
  ? ucma_query_route+0x818/0xc60
  ucma_query_route+0x818/0xc60
  ? ucma_listen+0x1b0/0x1b0
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  ? ucma_listen+0x1b0/0x1b0
  ? ucma_write+0x292/0x460
  ucma_write+0x292/0x460
  ? ucma_close_id+0x60/0x60
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  __vfs_write+0xf7/0x620
  ? ucma_close_id+0x60/0x60
  ? kernel_read+0x110/0x110
  ? time_hardirqs_on+0x19/0x580
  ? lock_acquire+0x18b/0x3a0
  ? finish_task_switch+0xf3/0x5d0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1be/0x5d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? security_file_permission+0x172/0x1e0
  vfs_write+0x192/0x460
  ksys_write+0xc6/0x1a0
  ? __ia32_sys_read+0xb0/0xb0
  ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
  ? do_syscall_64+0x1d/0x470
  do_syscall_64+0x9e/0x470
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3c86aa7 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
mrchapp pushed a commit to mrchapp/linux that referenced this pull request Apr 16, 2020
commit 987914a upstream.

After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.

This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.

The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
  CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ torvalds#311
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
  Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
  45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
  14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
  RSP: 0018:ffff88006586f980 EFLAGS: 00010207
  RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475
  RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c
  RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72
  R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30
  R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200
  FS: 00000000016fc880(0000) GS:ffff88006d000000(0000)
  knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  ? ib_copy_path_rec_from_user+0xcc0/0xcc0
  ? __mutex_unlock_slowpath+0xfc/0x670
  ? wait_for_completion+0x3b0/0x3b0
  ? ucma_query_route+0x818/0xc60
  ucma_query_route+0x818/0xc60
  ? ucma_listen+0x1b0/0x1b0
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  ? ucma_listen+0x1b0/0x1b0
  ? ucma_write+0x292/0x460
  ucma_write+0x292/0x460
  ? ucma_close_id+0x60/0x60
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  __vfs_write+0xf7/0x620
  ? ucma_close_id+0x60/0x60
  ? kernel_read+0x110/0x110
  ? time_hardirqs_on+0x19/0x580
  ? lock_acquire+0x18b/0x3a0
  ? finish_task_switch+0xf3/0x5d0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1be/0x5d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? security_file_permission+0x172/0x1e0
  vfs_write+0x192/0x460
  ksys_write+0xc6/0x1a0
  ? __ia32_sys_read+0xb0/0xb0
  ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
  ? do_syscall_64+0x1d/0x470
  do_syscall_64+0x9e/0x470
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3c86aa7 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
lag-linaro pushed a commit to lag-linaro/linux that referenced this pull request Apr 21, 2020
commit 987914a upstream.

After a successful allocation of path_rec, num_paths is set to 1, but any
error after such allocation will leave num_paths uncleared.

This causes to de-referencing a NULL pointer later on. Hence, num_paths
needs to be set back to 0 if such an error occurs.

The following crash from syzkaller revealed it.

  kasan: CONFIG_KASAN_INLINE enabled
  kasan: GPF could be caused by NULL-ptr deref or user memory access
  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
  CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ torvalds#311
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
  RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0
  Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89
  45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6
  14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85
  RSP: 0018:ffff88006586f980 EFLAGS: 00010207
  RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475
  RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c
  RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72
  R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30
  R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200
  FS: 00000000016fc880(0000) GS:ffff88006d000000(0000)
  knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  ? ib_copy_path_rec_from_user+0xcc0/0xcc0
  ? __mutex_unlock_slowpath+0xfc/0x670
  ? wait_for_completion+0x3b0/0x3b0
  ? ucma_query_route+0x818/0xc60
  ucma_query_route+0x818/0xc60
  ? ucma_listen+0x1b0/0x1b0
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  ? ucma_listen+0x1b0/0x1b0
  ? ucma_write+0x292/0x460
  ucma_write+0x292/0x460
  ? ucma_close_id+0x60/0x60
  ? sched_clock_cpu+0x18/0x1d0
  ? sched_clock_cpu+0x18/0x1d0
  __vfs_write+0xf7/0x620
  ? ucma_close_id+0x60/0x60
  ? kernel_read+0x110/0x110
  ? time_hardirqs_on+0x19/0x580
  ? lock_acquire+0x18b/0x3a0
  ? finish_task_switch+0xf3/0x5d0
  ? _raw_spin_unlock_irq+0x29/0x40
  ? _raw_spin_unlock_irq+0x29/0x40
  ? finish_task_switch+0x1be/0x5d0
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? security_file_permission+0x172/0x1e0
  vfs_write+0x192/0x460
  ksys_write+0xc6/0x1a0
  ? __ia32_sys_read+0xb0/0xb0
  ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
  ? do_syscall_64+0x1d/0x470
  do_syscall_64+0x9e/0x470
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 3c86aa7 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Avihai Horon <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Change-Id: I7f196a247c2650b63733e50bda2888ea87ec93c6
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 15, 2021
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #70: FILE: ./hal/hal_btcoex.c:70:
    +static u8 halbtcoutsrc_IsBtCoexistAvailable(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#104: FILE: ./hal/hal_btcoex.c:104:
    +static void halbtcoutsrc_LeaveLps(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#117: FILE: ./hal/hal_btcoex.c:117:
    +static void halbtcoutsrc_EnterLps(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#130: FILE: ./hal/hal_btcoex.c:130:
    +static void halbtcoutsrc_NormalLps(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#152: FILE: ./hal/hal_btcoex.c:152:
    +static void halbtcoutsrc_LeaveLowPower(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#187: FILE: ./hal/hal_btcoex.c:187:
    +static void halbtcoutsrc_NormalLowPower(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#196: FILE: ./hal/hal_btcoex.c:196:
    +static void halbtcoutsrc_DisableLowPower(struct BTC_COEXIST * pBtCoexist, u8 bLowPwrDisable)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#205: FILE: ./hal/hal_btcoex.c:205:
    +static void halbtcoutsrc_AggregationCheck(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#283: FILE: ./hal/hal_btcoex.c:283:
    +static u32 halbtcoutsrc_GetWifiLinkStatus(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#311: FILE: ./hal/hal_btcoex.c:311:
    +static u32 halbtcoutsrc_GetBtPatchVer(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#342: FILE: ./hal/hal_btcoex.c:342:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#448: FILE: ./hal/hal_btcoex.c:448:
    +			struct RT_LINK_DETECT_T * plinkinfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#510: FILE: ./hal/hal_btcoex.c:510:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#645: FILE: ./hal/hal_btcoex.c:645:
    +static void halbtcoutsrc_DisplayFwPwrModeCmd(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#661: FILE: ./hal/hal_btcoex.c:661:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#673: FILE: ./hal/hal_btcoex.c:673:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#685: FILE: ./hal/hal_btcoex.c:685:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#697: FILE: ./hal/hal_btcoex.c:697:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#709: FILE: ./hal/hal_btcoex.c:709:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#749: FILE: ./hal/hal_btcoex.c:749:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo *	bar" should be "foo *bar"
    torvalds#761: FILE: ./hal/hal_btcoex.c:761:
    +	struct BTC_COEXIST *	pBtCoexist = (struct BTC_COEXIST *)pBtcContext;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#772: FILE: ./hal/hal_btcoex.c:772:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #785: FILE: ./hal/hal_btcoex.c:785:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#797: FILE: ./hal/hal_btcoex.c:797:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#809: FILE: ./hal/hal_btcoex.c:809:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#821: FILE: ./hal/hal_btcoex.c:821:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#857: FILE: ./hal/hal_btcoex.c:857:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#869: FILE: ./hal/hal_btcoex.c:869:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo *		bar" should be "foo *bar"
    torvalds#891: FILE: ./hal/hal_btcoex.c:891:
    +	struct BTC_COEXIST *		pBtCoexist = &GLBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#917: FILE: ./hal/hal_btcoex.c:917:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#963: FILE: ./hal/hal_btcoex.c:963:
    +void EXhalbtcoutsrc_PowerOnSetting(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#975: FILE: ./hal/hal_btcoex.c:975:
    +void EXhalbtcoutsrc_InitHwConfig(struct BTC_COEXIST * pBtCoexist, u8 bWifiOnly)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#988: FILE: ./hal/hal_btcoex.c:988:
    +void EXhalbtcoutsrc_InitCoexDm(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1003: FILE: ./hal/hal_btcoex.c:1003:
    +void EXhalbtcoutsrc_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1030: FILE: ./hal/hal_btcoex.c:1030:
    +void EXhalbtcoutsrc_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1053: FILE: ./hal/hal_btcoex.c:1053:
    +void EXhalbtcoutsrc_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1082: FILE: ./hal/hal_btcoex.c:1082:
    +void EXhalbtcoutsrc_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 action)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1108: FILE: ./hal/hal_btcoex.c:1108:
    +void EXhalbtcoutsrc_MediaStatusNotify(struct BTC_COEXIST * pBtCoexist, enum RT_MEDIA_STATUS mediaStatus)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1135: FILE: ./hal/hal_btcoex.c:1135:
    +void EXhalbtcoutsrc_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 pktType)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1166: FILE: ./hal/hal_btcoex.c:1166:
    +void EXhalbtcoutsrc_BtInfoNotify(struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1184: FILE: ./hal/hal_btcoex.c:1184:
    +void EXhalbtcoutsrc_HaltNotify(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1197: FILE: ./hal/hal_btcoex.c:1197:
    +void EXhalbtcoutsrc_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1213: FILE: ./hal/hal_btcoex.c:1213:
    +void EXhalbtcoutsrc_Periodical(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1258: FILE: ./hal/hal_btcoex.c:1258:
    +void EXhalbtcoutsrc_DisplayBtCoexInfo(struct BTC_COEXIST * pBtCoexist)

Signed-off-by: Marco Cesati <[email protected]>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 15, 2021
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#285: FILE: ./hal/odm.c:285:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#287: FILE: ./hal/odm.c:287:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#289: FILE: ./hal/odm.c:289:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#291: FILE: ./hal/odm.c:291:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#305: FILE: ./hal/odm.c:305:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#309: FILE: ./hal/odm.c:309:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#311: FILE: ./hal/odm.c:311:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#313: FILE: ./hal/odm.c:313:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#315: FILE: ./hal/odm.c:315:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#323: FILE: ./hal/odm.c:323:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#325: FILE: ./hal/odm.c:325:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#327: FILE: ./hal/odm.c:327:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#330: FILE: ./hal/odm.c:330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#338: FILE: ./hal/odm.c:338:
    +void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#341: FILE: ./hal/odm.c:341:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#349: FILE: ./hal/odm.c:349:
    +void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#353: FILE: ./hal/odm.c:353:
    +void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#363: FILE: ./hal/odm.c:363:
    +void ODM_DMInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#393: FILE: ./hal/odm.c:393:
    +void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#420: FILE: ./hal/odm.c:420:
    +		struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#448: FILE: ./hal/odm.c:448:
    +void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#560: FILE: ./hal/odm.c:560:
    +void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#689: FILE: ./hal/odm.c:689:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#717: FILE: ./hal/odm.c:717:
    +void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#831: FILE: ./hal/odm.c:831:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#841: FILE: ./hal/odm.c:841:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#867: FILE: ./hal/odm.c:867:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#888: FILE: ./hal/odm.c:888:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#935: FILE: ./hal/odm.c:935:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#937: FILE: ./hal/odm.c:937:
    +	struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#953: FILE: ./hal/odm.c:953:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1083: FILE: ./hal/odm.c:1083:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1094: FILE: ./hal/odm.c:1094:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1131: FILE: ./hal/odm.c:1131:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1137: FILE: ./hal/odm.c:1137:
    +	struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1196: FILE: ./hal/odm.c:1196:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1198: FILE: ./hal/odm.c:1198:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1204: FILE: ./hal/odm.c:1204:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1217: FILE: ./hal/odm.c:1217:
    +	struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1234: FILE: ./hal/odm.c:1234:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1243: FILE: ./hal/odm.c:1243:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1306: FILE: ./hal/odm.c:1306:
    +static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1330: FILE: ./hal/odm.c:1330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1374: FILE: ./hal/odm.c:1374:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1398: FILE: ./hal/odm.c:1398:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1400: FILE: ./hal/odm.c:1400:
    +	struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;

Signed-off-by: Marco Cesati <[email protected]>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 16, 2021
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #70: FILE: ./hal/hal_btcoex.c:70:
    +static u8 halbtcoutsrc_IsBtCoexistAvailable(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#104: FILE: ./hal/hal_btcoex.c:104:
    +static void halbtcoutsrc_LeaveLps(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#117: FILE: ./hal/hal_btcoex.c:117:
    +static void halbtcoutsrc_EnterLps(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#130: FILE: ./hal/hal_btcoex.c:130:
    +static void halbtcoutsrc_NormalLps(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#152: FILE: ./hal/hal_btcoex.c:152:
    +static void halbtcoutsrc_LeaveLowPower(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#187: FILE: ./hal/hal_btcoex.c:187:
    +static void halbtcoutsrc_NormalLowPower(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#196: FILE: ./hal/hal_btcoex.c:196:
    +static void halbtcoutsrc_DisableLowPower(struct BTC_COEXIST * pBtCoexist, u8 bLowPwrDisable)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#205: FILE: ./hal/hal_btcoex.c:205:
    +static void halbtcoutsrc_AggregationCheck(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#283: FILE: ./hal/hal_btcoex.c:283:
    +static u32 halbtcoutsrc_GetWifiLinkStatus(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#311: FILE: ./hal/hal_btcoex.c:311:
    +static u32 halbtcoutsrc_GetBtPatchVer(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#342: FILE: ./hal/hal_btcoex.c:342:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#448: FILE: ./hal/hal_btcoex.c:448:
    +			struct RT_LINK_DETECT_T * plinkinfo;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#510: FILE: ./hal/hal_btcoex.c:510:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#645: FILE: ./hal/hal_btcoex.c:645:
    +static void halbtcoutsrc_DisplayFwPwrModeCmd(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#661: FILE: ./hal/hal_btcoex.c:661:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#673: FILE: ./hal/hal_btcoex.c:673:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#685: FILE: ./hal/hal_btcoex.c:685:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#697: FILE: ./hal/hal_btcoex.c:697:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#709: FILE: ./hal/hal_btcoex.c:709:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#749: FILE: ./hal/hal_btcoex.c:749:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo *	bar" should be "foo *bar"
    torvalds#761: FILE: ./hal/hal_btcoex.c:761:
    +	struct BTC_COEXIST *	pBtCoexist = (struct BTC_COEXIST *)pBtcContext;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#772: FILE: ./hal/hal_btcoex.c:772:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #785: FILE: ./hal/hal_btcoex.c:785:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#797: FILE: ./hal/hal_btcoex.c:797:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#809: FILE: ./hal/hal_btcoex.c:809:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#821: FILE: ./hal/hal_btcoex.c:821:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#857: FILE: ./hal/hal_btcoex.c:857:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#869: FILE: ./hal/hal_btcoex.c:869:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo *		bar" should be "foo *bar"
    torvalds#891: FILE: ./hal/hal_btcoex.c:891:
    +	struct BTC_COEXIST *		pBtCoexist = &GLBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#917: FILE: ./hal/hal_btcoex.c:917:
    +	struct BTC_COEXIST * pBtCoexist;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#963: FILE: ./hal/hal_btcoex.c:963:
    +void EXhalbtcoutsrc_PowerOnSetting(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#975: FILE: ./hal/hal_btcoex.c:975:
    +void EXhalbtcoutsrc_InitHwConfig(struct BTC_COEXIST * pBtCoexist, u8 bWifiOnly)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#988: FILE: ./hal/hal_btcoex.c:988:
    +void EXhalbtcoutsrc_InitCoexDm(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1003: FILE: ./hal/hal_btcoex.c:1003:
    +void EXhalbtcoutsrc_IpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1030: FILE: ./hal/hal_btcoex.c:1030:
    +void EXhalbtcoutsrc_LpsNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1053: FILE: ./hal/hal_btcoex.c:1053:
    +void EXhalbtcoutsrc_ScanNotify(struct BTC_COEXIST * pBtCoexist, u8 type)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1082: FILE: ./hal/hal_btcoex.c:1082:
    +void EXhalbtcoutsrc_ConnectNotify(struct BTC_COEXIST * pBtCoexist, u8 action)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1108: FILE: ./hal/hal_btcoex.c:1108:
    +void EXhalbtcoutsrc_MediaStatusNotify(struct BTC_COEXIST * pBtCoexist, enum RT_MEDIA_STATUS mediaStatus)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1135: FILE: ./hal/hal_btcoex.c:1135:
    +void EXhalbtcoutsrc_SpecialPacketNotify(struct BTC_COEXIST * pBtCoexist, u8 pktType)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1166: FILE: ./hal/hal_btcoex.c:1166:
    +void EXhalbtcoutsrc_BtInfoNotify(struct BTC_COEXIST * pBtCoexist, u8 *tmpBuf, u8 length)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1184: FILE: ./hal/hal_btcoex.c:1184:
    +void EXhalbtcoutsrc_HaltNotify(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1197: FILE: ./hal/hal_btcoex.c:1197:
    +void EXhalbtcoutsrc_PnpNotify(struct BTC_COEXIST * pBtCoexist, u8 pnpState)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1213: FILE: ./hal/hal_btcoex.c:1213:
    +void EXhalbtcoutsrc_Periodical(struct BTC_COEXIST * pBtCoexist)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1258: FILE: ./hal/hal_btcoex.c:1258:
    +void EXhalbtcoutsrc_DisplayBtCoexInfo(struct BTC_COEXIST * pBtCoexist)

Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: Marco Cesati <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Mar 16, 2021
This commit fixes the following checkpatch.pl errors:

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#285: FILE: ./hal/odm.c:285:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#287: FILE: ./hal/odm.c:287:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#289: FILE: ./hal/odm.c:289:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#291: FILE: ./hal/odm.c:291:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#305: FILE: ./hal/odm.c:305:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#309: FILE: ./hal/odm.c:309:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#311: FILE: ./hal/odm.c:311:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#313: FILE: ./hal/odm.c:313:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#315: FILE: ./hal/odm.c:315:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#323: FILE: ./hal/odm.c:323:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#325: FILE: ./hal/odm.c:325:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#327: FILE: ./hal/odm.c:327:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#330: FILE: ./hal/odm.c:330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#338: FILE: ./hal/odm.c:338:
    +void odm_InitHybridAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#341: FILE: ./hal/odm.c:341:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#349: FILE: ./hal/odm.c:349:
    +void odm_SetRxIdleAnt(struct DM_ODM_T * pDM_Odm, u8 Ant, bool bDualPath);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#353: FILE: ./hal/odm.c:353:
    +void odm_HwAntDiv(struct DM_ODM_T * pDM_Odm);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#363: FILE: ./hal/odm.c:363:
    +void ODM_DMInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#393: FILE: ./hal/odm.c:393:
    +void ODM_DMWatchdog(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#420: FILE: ./hal/odm.c:420:
    +		struct DIG_T * pDM_DigTable = &pDM_Odm->DM_DigTable;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#448: FILE: ./hal/odm.c:448:
    +void ODM_CmnInfoInit(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, u32 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#560: FILE: ./hal/odm.c:560:
    +void ODM_CmnInfoHook(struct DM_ODM_T * pDM_Odm, enum ODM_CMNINFO_E CmnInfo, void *pValue)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#689: FILE: ./hal/odm.c:689:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#717: FILE: ./hal/odm.c:717:
    +void ODM_CmnInfoUpdate(struct DM_ODM_T * pDM_Odm, u32 CmnInfo, u64 Value)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#831: FILE: ./hal/odm.c:831:
    +void odm_CommonInfoSelfInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#841: FILE: ./hal/odm.c:841:
    +void odm_CommonInfoSelfUpdate(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#867: FILE: ./hal/odm.c:867:
    +void odm_CmnInfoInit_Debug(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#888: FILE: ./hal/odm.c:888:
    +void odm_BasicDbgMessage(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#935: FILE: ./hal/odm.c:935:
    +void odm_RateAdaptiveMaskInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#937: FILE: ./hal/odm.c:937:
    +	struct ODM_RATE_ADAPTIVE * pOdmRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#953: FILE: ./hal/odm.c:953:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1083: FILE: ./hal/odm.c:1083:
    +void odm_RefreshRateAdaptiveMask(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    torvalds#1094: FILE: ./hal/odm.c:1094:
    +void odm_RefreshRateAdaptiveMaskCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1131: FILE: ./hal/odm.c:1131:
    +	struct DM_ODM_T * pDM_Odm,

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1137: FILE: ./hal/odm.c:1137:
    +	struct ODM_RATE_ADAPTIVE * pRA = &pDM_Odm->RateAdaptive;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1196: FILE: ./hal/odm.c:1196:
    +void odm_RSSIMonitorInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1198: FILE: ./hal/odm.c:1198:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1204: FILE: ./hal/odm.c:1204:
    +void odm_RSSIMonitorCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1217: FILE: ./hal/odm.c:1217:
    +	struct DM_ODM_T * pDM_Odm = &(pHalData->odmpriv);

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1234: FILE: ./hal/odm.c:1234:
    +void odm_RSSIMonitorCheckCE(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1243: FILE: ./hal/odm.c:1243:
    +	struct RA_T * pRA_Table = &pDM_Odm->DM_RA_Table;

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1306: FILE: ./hal/odm.c:1306:
    +static u8 getSwingIndex(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1330: FILE: ./hal/odm.c:1330:
    +void odm_TXPowerTrackingInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1374: FILE: ./hal/odm.c:1374:
    +void ODM_TXPowerTrackingCheck(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1398: FILE: ./hal/odm.c:1398:
    +void odm_SwAntDetectInit(struct DM_ODM_T * pDM_Odm)

    ERROR:POINTER_LOCATION: "foo * bar" should be "foo *bar"
    #1400: FILE: ./hal/odm.c:1400:
    +	struct SWAT_T * pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;

Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: Marco Cesati <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Apr 8, 2021
…format

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Lokendra Singh <[email protected]>
fengguang pushed a commit to 0day-ci/linux that referenced this pull request May 7, 2021
…format

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Lokendra Singh <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
roxell pushed a commit to roxell/linux that referenced this pull request May 10, 2021
…format

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Lokendra Singh <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
nbdd0121 pushed a commit to nbdd0121/linux that referenced this pull request May 29, 2021
Define a file descriptor reservation/commit/rollback abstraction.
fengguang pushed a commit to 0day-ci/linux that referenced this pull request Jun 28, 2021
…format

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Lokendra Singh <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
intersectRaven pushed a commit to intersectRaven/linux that referenced this pull request Jul 19, 2021
…format

[ Upstream commit 06d213d ]

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  torvalds#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Lokendra Singh <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
damentz referenced this pull request in zen-kernel/zen-kernel Jul 19, 2021
…format

[ Upstream commit 06d213d ]

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  #309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 #310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  #311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               #314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #325 [hci0] 49.500311

Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Lokendra Singh <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
repojohnray pushed a commit to repojohnray/linux-sunxi-4.7.y that referenced this pull request Jul 19, 2021
…format

[ Upstream commit 06d213d ]

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  linux-sunxi#309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 torvalds#310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  torvalds#311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               torvalds#314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              torvalds#323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              torvalds#325 [hci0] 49.500311

Signed-off-by: Kiran K <[email protected]>
Signed-off-by: Lokendra Singh <[email protected]>
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
akiernan pushed a commit to zuma-array/linux that referenced this pull request Nov 3, 2022
PD#150075: driver defect clean up:
 vdac_dev.c:
#5
torvalds#6
torvalds#876
 tv_vout.c:
torvalds#181
torvalds#267
torvalds#311
torvalds#312
torvalds#313
torvalds#314
torvalds#315
torvalds#532
torvalds#605

Change-Id: I185072efb68df1abdad036a21867bb64efca914c
Signed-off-by: Nian Jing <[email protected]>
akiernan pushed a commit to zuma-array/linux that referenced this pull request Nov 4, 2022
PD#150075: driver defect clean up:
 vdac_dev.c:
#5
torvalds#6
torvalds#876
 tv_vout.c:
torvalds#181
torvalds#267
torvalds#311
torvalds#312
torvalds#313
torvalds#314
torvalds#315
torvalds#532
torvalds#605

Change-Id: I185072efb68df1abdad036a21867bb64efca914c
Signed-off-by: Nian Jing <[email protected]>
JIaxyga pushed a commit to sm8450-mainline/linux that referenced this pull request Feb 5, 2024
…_locked

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
gnoack pushed a commit to gnoack/linux that referenced this pull request Feb 9, 2024
…_locked

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Kaz205 pushed a commit to Kaz205/linux that referenced this pull request Feb 21, 2024
…_locked

commit ccb88e9 upstream.

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
mj22226 pushed a commit to mj22226/linux that referenced this pull request Feb 22, 2024
…_locked

commit ccb88e9 upstream.

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
mj22226 pushed a commit to mj22226/linux that referenced this pull request Feb 22, 2024
…_locked

commit ccb88e9 upstream.

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
staging-kernelci-org pushed a commit to kernelci/linux that referenced this pull request Feb 23, 2024
…_locked

commit ccb88e9 upstream.

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
RevySR pushed a commit to revyos/th1520-linux-kernel that referenced this pull request Feb 23, 2024
…_locked

commit ccb88e9 upstream.

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
RevySR pushed a commit to revyos/th1520-linux-kernel that referenced this pull request Feb 23, 2024
…_locked

commit ccb88e9 upstream.

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
1054009064 pushed a commit to 1054009064/linux that referenced this pull request Feb 23, 2024
…_locked

commit ccb88e9 upstream.

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
1054009064 pushed a commit to 1054009064/linux that referenced this pull request Feb 23, 2024
…_locked

commit ccb88e9 upstream.

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
NeroReflex pushed a commit to NeroReflex/linux that referenced this pull request Mar 3, 2024
…_locked

commit ccb88e9 upstream.

The SEV platform device can be shutdown with a null psp_master,
e.g., using DEBUG_TEST_DRIVER_REMOVE.  Found using KASAN:

[  137.148210] ccp 0000:23:00.1: enabling device (0000 -> 0002)
[  137.162647] ccp 0000:23:00.1: no command queues available
[  137.170598] ccp 0000:23:00.1: sev enabled
[  137.174645] ccp 0000:23:00.1: psp enabled
[  137.178890] general protection fault, probably for non-canonical address 0xdffffc000000001e: 0000 [ChimeraOS#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI
[  137.182693] KASAN: null-ptr-deref in range [0x00000000000000f0-0x00000000000000f7]
[  137.182693] CPU: 93 PID: 1 Comm: swapper/0 Not tainted 6.8.0-rc1+ torvalds#311
[  137.182693] RIP: 0010:__sev_platform_shutdown_locked+0x51/0x180
[  137.182693] Code: 08 80 3c 08 00 0f 85 0e 01 00 00 48 8b 1d 67 b6 01 08 48 b8 00 00 00 00 00 fc ff df 48 8d bb f0 00 00 00 48 89 f9 48 c1 e9 03 <80> 3c 01 00 0f 85 fe 00 00 00 48 8b 9b f0 00 00 00 48 85 db 74 2c
[  137.182693] RSP: 0018:ffffc900000cf9b0 EFLAGS: 00010216
[  137.182693] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 000000000000001e
[  137.182693] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 00000000000000f0
[  137.182693] RBP: ffffc900000cf9c8 R08: 0000000000000000 R09: fffffbfff58f5a66
[  137.182693] R10: ffffc900000cf9c8 R11: ffffffffac7ad32f R12: ffff8881e5052c28
[  137.182693] R13: ffff8881e5052c28 R14: ffff8881758e43e8 R15: ffffffffac64abf8
[  137.182693] FS:  0000000000000000(0000) GS:ffff889de7000000(0000) knlGS:0000000000000000
[  137.182693] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  137.182693] CR2: 0000000000000000 CR3: 0000001cf7c7e000 CR4: 0000000000350ef0
[  137.182693] Call Trace:
[  137.182693]  <TASK>
[  137.182693]  ? show_regs+0x6c/0x80
[  137.182693]  ? __die_body+0x24/0x70
[  137.182693]  ? die_addr+0x4b/0x80
[  137.182693]  ? exc_general_protection+0x126/0x230
[  137.182693]  ? asm_exc_general_protection+0x2b/0x30
[  137.182693]  ? __sev_platform_shutdown_locked+0x51/0x180
[  137.182693]  sev_firmware_shutdown.isra.0+0x1e/0x80
[  137.182693]  sev_dev_destroy+0x49/0x100
[  137.182693]  psp_dev_destroy+0x47/0xb0
[  137.182693]  sp_destroy+0xbb/0x240
[  137.182693]  sp_pci_remove+0x45/0x60
[  137.182693]  pci_device_remove+0xaa/0x1d0
[  137.182693]  device_remove+0xc7/0x170
[  137.182693]  really_probe+0x374/0xbe0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  __driver_probe_device+0x199/0x460
[  137.182693]  driver_probe_device+0x4e/0xd0
[  137.182693]  __driver_attach+0x191/0x3d0
[  137.182693]  ? __pfx___driver_attach+0x10/0x10
[  137.182693]  bus_for_each_dev+0x100/0x190
[  137.182693]  ? __pfx_bus_for_each_dev+0x10/0x10
[  137.182693]  ? __kasan_check_read+0x15/0x20
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? _raw_spin_unlock+0x27/0x50
[  137.182693]  driver_attach+0x41/0x60
[  137.182693]  bus_add_driver+0x2a8/0x580
[  137.182693]  driver_register+0x141/0x480
[  137.182693]  __pci_register_driver+0x1d6/0x2a0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? esrt_sysfs_init+0x1cd/0x5d0
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  sp_pci_init+0x22/0x30
[  137.182693]  sp_mod_init+0x14/0x30
[  137.182693]  ? __pfx_sp_mod_init+0x10/0x10
[  137.182693]  do_one_initcall+0xd1/0x470
[  137.182693]  ? __pfx_do_one_initcall+0x10/0x10
[  137.182693]  ? parameq+0x80/0xf0
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  ? __kmalloc+0x3b0/0x4e0
[  137.182693]  ? kernel_init_freeable+0x92d/0x1050
[  137.182693]  ? kasan_populate_vmalloc_pte+0x171/0x190
[  137.182693]  ? srso_return_thunk+0x5/0x5f
[  137.182693]  kernel_init_freeable+0xa64/0x1050
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  kernel_init+0x24/0x160
[  137.182693]  ? __switch_to_asm+0x3e/0x70
[  137.182693]  ret_from_fork+0x40/0x80
[  137.182693]  ? __pfx_kernel_init+0x10/0x10
[  137.182693]  ret_from_fork_asm+0x1b/0x30
[  137.182693]  </TASK>
[  137.182693] Modules linked in:
[  137.538483] ---[ end trace 0000000000000000 ]---

Fixes: 1b05ece ("crypto: ccp - During shutdown, check SEV data pointer before using")
Cc: [email protected]
Reviewed-by: Mario Limonciello <[email protected]>
Signed-off-by: Kim Phillips <[email protected]>
Reviewed-by: Liam Merwick <[email protected]>
Acked-by: John Allen <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

1 participant