There are many ways to contribute, and we welcome your help! By contributing to this project, you agree to abide by our Code of Conduct.

securedrop-client

The SecureDrop Client is a desktop application for journalists to communicate with sources and work with submissions on the SecureDrop Workstation.

The client runs within a Qubes OS VM that has no direct network access and opens files within individual, non-networked, disposable VMs. API requests and responses to and from the SecureDrop application server are sent through an intermediate VM using the SecureDrop Proxy.

To learn more about architecture and our rationale behind our Qubes OS approach, see the SecureDrop Workstation readme.

IMPORTANT: This project is currently undergoing a pilot study and should not be used in production environments.

Getting Started

The quickest way to get started with running the client is to use the developer environment that runs against a test server running in a local docker container. This differs from a staging or production environment where the client receives and sends requests over Tor. Things are a lot snappier in the developer environment and can sometimes lead to a much different user experience, which is why it is important to do end-to-end testing in Qubes using the staging environment, especially if you are modifying code paths involving how we handle server requests and responses.

For reproducing production bugs or running demos, we recommend using the Production Environment that will allow you to test a nightly build of the client.

We support running the developer environment on a non-Qubes OS for developer convenience. If this is your preferred environment, keep in mind that you, or a PR reviewer, will need to run tests in Qubes if you modify code paths involving any of the following:

• cryptography
• opening of files in VMs
• network (via the RPC service) traffic
• fine tuning of the graphical user interface

Running against a test server

In order to login, or take other actions involving network access, you will need to run the client against a SecureDrop server. If you don't have a production server or want to test against a test server, you can install a SecureDrop server inside a dev container by following the instructions in the SecureDrop documentation.

The client uses the SecureDrop SDK to interact with the SecureDrop Journalist API. After you run the server container, the journalist interface API will be running on 127.0.0.1:8081 with a test journalist, admin, and test sources and replies.

To ensure that file decryption works, please import this test private key into your GnuPG keyring. Submissions in the SecureDrop server dev environment can be decrypted with this test key.

Developer environment

Running the client in a developer environment will use a temporary directory as its configuration directory, instead of ~/.securedrop_client. A development gpg private key inside a gpg keychain is stored in the temporary configuration directory, which will be used to decrypt messages sent from the server running in the local docker container.

The SecureDrop client will open or export file submissions within disposable AppVms.

Tor is not used in the developer environment. If you want to use a Tor connection between the client and server, then you'll need to follow the staging environment instructions instead.

1. Open a terminal in the sd-app AppVM in Qubes

2. Run a SecureDrop server in a local docker container

See SecureDrop docs for setup instructions, including post-installation steps for allowing docker to be run as a non-root user, which is a requirement on Qubes.

3. In a new terminal tab, clone the SecureDrop Client repo and set up its virtual environment

git clone [email protected]:freedomofpress/securedrop-client.git
cd securedrop-client
make venv
source .venv/bin/activate

• You will need Python 3.7 to run the client. If it's not the default python3 on your installation, you can use PYTHON=python3.7 make venv to explicitly use a python3.7 binary.
• make venv will also run make hooks, which will configure Git to use the hooks found in .githooks/ to check certain code-quality standards on new commits in this repository. These checks are also enforced in CI.

4. Run SecureDrop Client

./run.sh

Or, if you want to persist data across restarts, you will need to run the client with:

./run.sh --sdc-home /path/to/my/configuration/directory

Developer environment on a Linux-based non-Qubes OS

Running the client in a developer environment will use a temporary directory as its configuration directory, instead of ~/.securedrop_client. A development gpg private key inside a gpg keychain is stored in the temporary configuration directory, which will be used to decrypt messages.

If you want to be able to open or export file submissions in a disposable AppVM, then you'll need to follow the instructions for running this in a developer environment in Qubes.

Tor is not used in the developer environment. If you want to use a Tor connection between the client and server, then you'll need to follow the staging environment instructions instead.

1. Open a terminal from your non-Qubes OS

2. Run a SecureDrop server in a local docker container

See SecureDrop docs for setup instructions.

3. In a new terminal tab, clone the SecureDrop Client repo and set up its virtual environment

git clone [email protected]:freedomofpress/securedrop-client.git
cd securedrop-client
make venv
source .venv/bin/activate

• make venv will also run make hooks, which will configure Git to use the hooks found in .githooks/ to check certain code-quality standards on new commits in this repository. These checks are also enforced in CI.

4. Run SecureDrop Client

./run.sh

Or, if you want to persist data across restarts, you will need to run the client with:

./run.sh --sdc-home /path/to/my/configuration/directory

Developer environment on macOS

It is possible to run the development environment in macOS on non-Apple Silicon (M1) systems, but some functionality may not be available:

• If you want to be able to open or export file submissions in a disposable AppVM, then you'll need to follow the instructions for running this in a developer environment in Qubes.
• Tor is not used in the developer environment. If you want to use a Tor connection between the client and server, then you'll need to follow the staging environment instructions instead.

Set up the server

1. Open a terminal in macOS (note: this terminal must be a login shell - check your terminal app preferences)

2. Run a SecureDrop server in a local docker container:

   1. If it is not already installed, install Docker following instructions from https://docs.docker.com/desktop/mac/install/
   2. Clone the securedrop repo: git clone [email protected]:freedomofpress/securedrop.git
   3. Start the development server: cd securedrop && make dev. The Source Interface will now be available on http://localhost:8080.

See SecureDrop docs for more info and troubleshooting steps if necessary.

Set up the SecureDrop Client

1. Open a new terminal window.

2. If it is not already installed, install Homebrew via the instructions at https://brew.sh/

3. Install dependencies via Homebrew: brew install pyenv gnupg oath-toolkit

4. Set up pyenv following the steps here: https://github.com/pyenv/pyenv#basic-github-checkout - starting with #2 ("Configure your shell's environment for Pyenv"). You may need to close and reopen the terminal window for changes to be applied.

5. install and select the latest version of python 3.7.x

   pyenv install 3.7.x
   pyenv local 3.7.x
   

6. clone the SecureDrop Client repo and set up its virtual environment

   git clone [email protected]:freedomofpress/securedrop-client.git
   cd securedrop-client
   make venv-mac
   source .venv/bin/activate
   

   • make venv-mac will also run make hooks, which will configure Git to use the hooks found in .githooks/ to check certain code-quality standards on new commits in this repository. These checks are also enforced in CI.

7. Run SecureDrop Client

   ./run.sh
   

To log in, use one of the journalist usernames/passwords displayed in the Docker server output, such as journalist/correct horse battery staple profanity oil chewy. To generate the required 2FA token, use the oathtool command, eg: oathtool -b --totp "JHCOGO7VCER3EJ4L" in your terminal.

Note: to persist data and config across multiple client runs, specify a home directory, e.g. ./run.sh --sdc_home=~/.sd_client

Staging environment

Running the SecureDrop client in a staging environment will use a ~/.securedrop_client as its configuration directory. The gpg key in the sd-gpg AppVM configured during make all will be used to decrypt messages.

The SecureDrop client will open or export file submissions within disposable AppVms.

Requests and responses between the client and server use a Tor connection, which are proxied via the securedrop-proxy AppVM's RPC service.

1. Run a SecureDrop staging server

See SecureDrop docs on setting up a staging server or SecureDrop docs on setting up a staging server in Qubes

2. Open a terminal in dom0 in Qubes

3. Create a config.json file

cd securedrop-worksation
cp config.json.example config.json
vi config.json

config.json.example already contains the staging server's submission key fingerprint (and sd-journalist.sec already contains the staging server's private submission key) so all you need to do is update the hidserv hostname and key in config.json. To find this information, you can run sudo cat /var/lib/tor/services/journalist/hostname on you staging server.

4. Run make all to configure the AppVms

5. Open a terminal in the sd-app AppVM

6. Initialize the SecureDrop Client database by running the installed client (e.g. nightly build) once by running:

securedrop-client

Or manually initialize the SecureDrop Client database.

8. To run a different version of the client, first add a NetVM (sys-firewall) to sd-app via its Qubes Settings so you can clone the client repository, and then follow these steps:

git clone [email protected]:freedomofpress/securedrop-client.git
cd securedrop-client
virtualenv --python=python3.7 .venv
source .venv/bin/activate
pip install --require-hashes -r requirements/dev-requirements.txt

9. Run the client

python -m securedrop_client

Production environment

Running the SecureDrop client in a production environment will use a ~/.securedrop_client as its configuration directory. The gpg key in the sd-gpg AppVM configured during make all will be used to decrypt messages.

The SecureDrop client will open or export file submissions within disposable AppVms.

Requests and responses between the client and server use a Tor connection, which are proxied via the securedrop-proxy AppVM's RPC service.

1. Run a SecureDrop server

See SecureDrop docs on setting up a server

2. Open a terminal in dom0 in Qubes

3. Create a config.json file

cd securedrop-worksation
cp config.json.example config.json
vi config.json

Update the hidserv hostname and key in config.json. To find this information, you can run sudo cat /var/lib/tor/services/journalist/hostname on you staging server. Update the Submission Key fingerprint as well.

4. Create an sd-journalist.sec file

Create sd-journalist.sec in the securedrop-workstation directory in dom0 and copy your server's private submission key to this file. You can find this key in ~/Persistent/securedrop/install_files/ansible-base on the Tails drive you used to set up your SecureDrop server.

5. Run the nightly build of the client by double-clicking the SecureDrop shortcut on your Qubes Desktop

securedrop-client

Updating dependencies

dev-requirements.txt and requirements.txt point to python software foundation hashes, and build-requirements.txt points to our builds of the wheels from our own pip mirror (https://github.com/freedomofpress/securedrop-debian-packaging/tree/main/localwheels). Whenever a dependency in build-requirements.txt changes, our team needs to manually review the code in the dependency diff with a focus on spotting vulnerabilities.

If you're adding or updating a dependency, you need to:

1. Modify either requirements.in or dev-requirements.in (depending on whether it is prod or dev only)
2. Run make update-pip-requirements. This will generate dev-requirements.txt and requirements.txt

For building a debian package from this project, we use the requirements in build-requirements.txt which uses our pip mirror, i.e. the hashes in that file point to wheels on our pip mirror. A maintainer will need to add the updated dependency to our pip mirror (you can request this in the PR).

3. Once the pip mirror is updated, you should checkout the securedrop-debian-packaging repo and run make requirements. Commit the build-requirements.txt that results and add it to your PR.

Generating and running database migrations

rm -f svs.sqlite
sqlite3 svs.sqlite .databases > /dev/null
alembic upgrade head
alembic revision --autogenerate -m "describe your revision here"

NOTE. Schema migrations, data migrations, and tests MUST be self-contained. That is, their upgrade() and downgrade() methods and their tests MUST NOT rely, directly or indirectly, on other project code, such as db.py's SQLAlchemy models or other helper classes and functions defined outside of the migration under test, because these utilities may change in Git over time. (The scaffolding of the test_alembic.py test suite MAY rely on such utilities, because it is versioned at the Git level, not the Alembic level.) See #1500 for an example of why this guideline applies.

AppArmor support

An AppArmor profile is available for mandatory access control. When installing securedrop-client from a .deb package, the AppArmor profile will automatically be copied and enforced. Below are instructions to use the profile in non-production scenarios.

Requirements

1. The entrypoint for the application must be through /usr/bin/securedrop-client with application code in /opt/venvs/securedrop-client.

2. The kernel must support AppArmor (running sudo aa-status will return zero if AppArmor is supported).

3. The apparmor-utils package is installed (sudo apt install apparmor-utils in Debian).

Enabling AppArmor

1. Copy files/usr.bin.securedrop-client to /etc/apparmor.d/.

2. sudo aa-enforce /etc/apparmor.d/usr.bin.securedrop-client/.

3. sudo aa-status and observe securedrop-client profile is being enforced.

Testing and updating the AppArmor profile

1. Update the profile in /etc/apparmor.d/usr.bin.securedrop-client.

2. sudo aa-teardown.

3. sudo service apparmor restart.

4. Once you've made all the changes necessary (e.g.: no apparmor errors in /var/log/syslog) you can copy /etc/apparmor.d/usr.bin.securedrop-client into files/usr.bin.securedrop-client in this repository and commit the changes.

Running tests and checks

There are two packages you'll have to install manually in order to run the entire test suite:

apt install xvfb apt install sqlite3

We launch tests via xvfb-run on an xvfb X server in order to support machines with no display hardware, like we have in CircleCI. Even when running tests on a machine with display hardware, xvfb is useful in that it prevents a bunch of windows and dialogs from popping up on your desktop. If you want to run tests without xfvb then you can just uninstall it and run thet tests and checks as described below.

NOTE: xvfb-run will start and stop xvfb for you.

To run all tests and checks, run:

make check

To only run unit tests, run:

make test

To run unit tests in random order, run:

make test-random

To only run integration tests, run:

make test-integration

To only run functional tests, run:

make test-functional

Functional Tests

When functional tests are run, they replay recorded API request and response data instead of making actual API calls to a server. This is why tests can pass even when there is no server running. If you want to add new tests that make API calls or if the SDK ever changes its API, then you'll need to record new request and response data by following the steps outlined in Generating new cassettes.

We use qtbot, bundled with the pytest-qt package, for UI interaction within our functional tests.

Generating new cassettes

We use vcrpy to record and replay API calls. Each request made from a test and response from the server is stored in a "cassette" yaml file in the tests/functional/cassettes directory.

If the SDK changes its API, then you'll see the following warning indicating that a request failed to be found in an existing cassette and that you'll need to regenerate cassettes:

Can't overwrite existing cassette ('<path-to-cassette-for-a-functional-test>') in your current record mode ('once').

To set up a local dev server and generate cassettes, follow these steps:

1. Bypass TOTP verification so that we can use the TOTP value of 123456 hard-coded in tests/conftest.py. You can do this by applying the following patch to the server code:

https://gist.github.com/creviera/8793d5ec4d28f034f2c1e8320a93866a

2. Start the server in a docker container and add 5 sources with messages, files, and replies by running:

   NUM_SOURCES=5 make dev

3. Delete the cassettes you wish to regenerate or just delete the entire directory by running:

   rm -r tests/functional/cassettes

4. Regenerate cassettes by running:

   make test-functional

Note: One of the functional tests deletes a source, so you may need to add it back or restart the server in between test runs where you are generating new cassettes.

Making a Release

1. Update versions: ./update_version.sh $new_version_number and add a new entry in the changelog.
2. Commit the changes with commit message securedrop-client $new_version_number and make a PR.
3. You should confirm via a manual debian package build and manual testing in Qubes that there are no regressions (this is limited pre-release QA).
4. Once your PR is approved, you can add a tag: git tag -a $new_version_number.
5. Perform the release signing ceremony on the tag. Push the tag.
6. The signer should create the source tarball via python3 setup.py sdist.
7. Add a detached signature (with the release key) for the source tarball.
8. Submit the source tarball and signature via PR into this repository along with the debian changelog addition. This tarball and changelog will be used by the package builder.

Debugging

To use pdb, add these lines:

from PyQt5.QtCore import pyqtRemoveInputHook; pyqtRemoveInputHook()
import pdb; pdb.set_trace()

Then you can use pdb commands as normal.

Logs can be found in the {sdc-home}/logs. If you are debugging a version of this application installed from a deb package in Qubes, you can debug issues by looking at the log file in ~/.securedrop_client/logs/client.log. You can also add additional log lines in the running code in /opt/venvs/securedrop-client/lib/python3.7/site-packages/securedrop_client/.