Support max_queue=None like the legacy implementation.

Fix #1540.

docs/project/changelog.rst

@@ -34,6 +34,13 @@ notice.
 
 .. _14.0:
 
+Improvements
+............
+
+* Supported ``max_queue=None`` in the :mod:`asyncio` and :mod:`threading`
+  implementations for consistency with the legacy implementation, even though
+  this is never a good idea.
+
 Bug fixes
 .........
 

src/websockets/asyncio/client.py

@@ -60,7 +60,7 @@ def __init__(
         ping_interval: float | None = 20,
         ping_timeout: float | None = 20,
         close_timeout: float | None = 10,
-        max_queue: int | tuple[int, int | None] = 16,
+        max_queue: int | None | tuple[int | None, int | None] = 16,
         write_limit: int | tuple[int, int | None] = 2**15,
     ) -> None:
         self.protocol: ClientProtocol
@@ -222,7 +222,8 @@ class connect:
         max_queue: High-water mark of the buffer where frames are received.
             It defaults to 16 frames. The low-water mark defaults to ``max_queue
             // 4``. You may pass a ``(high, low)`` tuple to set the high-water
-            and low-water marks.
+            and low-water marks. If you want to disable flow control entirely,
+            you may set it to ``None``, although that's a bad idea.
         write_limit: High-water mark of write buffer in bytes. It is passed to
             :meth:`~asyncio.WriteTransport.set_write_buffer_limits`. It defaults
             to 32 KiB. You may pass a ``(high, low)`` tuple to set the
@@ -283,7 +284,7 @@ def __init__(
         close_timeout: float | None = 10,
         # Limits
         max_size: int | None = 2**20,
-        max_queue: int | tuple[int, int | None] = 16,
+        max_queue: int | None | tuple[int | None, int | None] = 16,
         write_limit: int | tuple[int, int | None] = 2**15,
         # Logging
         logger: LoggerLike | None = None,

src/websockets/asyncio/connection.py

@@ -56,14 +56,14 @@ def __init__(
         ping_interval: float | None = 20,
         ping_timeout: float | None = 20,
         close_timeout: float | None = 10,
-        max_queue: int | tuple[int, int | None] = 16,
+        max_queue: int | None | tuple[int | None, int | None] = 16,
         write_limit: int | tuple[int, int | None] = 2**15,
     ) -> None:
         self.protocol = protocol
         self.ping_interval = ping_interval
         self.ping_timeout = ping_timeout
         self.close_timeout = close_timeout
-        if isinstance(max_queue, int):
+        if isinstance(max_queue, int) or max_queue is None:
             max_queue = (max_queue, None)
         self.max_queue = max_queue
         if isinstance(write_limit, int):

src/websockets/asyncio/messages.py

@@ -84,7 +84,7 @@ class Assembler:
     # coverage reports incorrectly: "line NN didn't jump to the function exit"
     def __init__(  # pragma: no cover
         self,
-        high: int = 16,
+        high: int | None = None,
         low: int | None = None,
         pause: Callable[[], Any] = lambda: None,
         resume: Callable[[], Any] = lambda: None,
@@ -96,12 +96,15 @@ def __init__(  # pragma: no cover
         # call to Protocol.data_received() could produce thousands of frames,
         # which must be buffered. Instead, we pause reading when the buffer goes
         # above the high limit and we resume when it goes under the low limit.
-        if low is None:
+        if high is not None and low is None:
             low = high // 4
-        if low < 0:
-            raise ValueError("low must be positive or equal to zero")
-        if high < low:
-            raise ValueError("high must be greater than or equal to low")
+        if high is None and low is not None:
+            high = low * 4
+        if high is not None and low is not None:
+            if low < 0:
+                raise ValueError("low must be positive or equal to zero")
+            if high < low:
+                raise ValueError("high must be greater than or equal to low")
         self.high, self.low = high, low
         self.pause = pause
         self.resume = resume
@@ -256,13 +259,21 @@ def put(self, frame: Frame) -> None:
 
     def maybe_pause(self) -> None:
         """Pause the writer if queue is above the high water mark."""
+        # Skip if flow control is disabled
+        if self.high is None:
+            return
+
         # Check for "> high" to support high = 0
         if len(self.frames) > self.high and not self.paused:
             self.paused = True
             self.pause()
 
     def maybe_resume(self) -> None:
         """Resume the writer if queue is below the low water mark."""
+        # Skip if flow control is disabled
+        if self.low is None:
+            return
+
         # Check for "<= low" to support low = 0
         if len(self.frames) <= self.low and self.paused:
             self.paused = False

src/websockets/asyncio/server.py

@@ -71,7 +71,7 @@ def __init__(
         ping_interval: float | None = 20,
         ping_timeout: float | None = 20,
         close_timeout: float | None = 10,
-        max_queue: int | tuple[int, int | None] = 16,
+        max_queue: int | None | tuple[int | None, int | None] = 16,
         write_limit: int | tuple[int, int | None] = 2**15,
     ) -> None:
         self.protocol: ServerProtocol
@@ -643,7 +643,8 @@ def handler(websocket):
         max_queue: High-water mark of the buffer where frames are received.
             It defaults to 16 frames. The low-water mark defaults to ``max_queue
             // 4``. You may pass a ``(high, low)`` tuple to set the high-water
-            and low-water marks.
+            and low-water marks. If you want to disable flow control entirely,
+            you may set it to ``None``, although that's a bad idea.
         write_limit: High-water mark of write buffer in bytes. It is passed to
             :meth:`~asyncio.WriteTransport.set_write_buffer_limits`. It defaults
             to 32 KiB. You may pass a ``(high, low)`` tuple to set the
@@ -713,7 +714,7 @@ def __init__(
         close_timeout: float | None = 10,
         # Limits
         max_size: int | None = 2**20,
-        max_queue: int | tuple[int, int | None] = 16,
+        max_queue: int | None | tuple[int | None, int | None] = 16,
         write_limit: int | tuple[int, int | None] = 2**15,
         # Logging
         logger: LoggerLike | None = None,

src/websockets/sync/client.py

@@ -55,7 +55,7 @@ def __init__(
         protocol: ClientProtocol,
         *,
         close_timeout: float | None = 10,
-        max_queue: int | tuple[int, int | None] = 16,
+        max_queue: int | None | tuple[int | None, int | None] = 16,
     ) -> None:
         self.protocol: ClientProtocol
         self.response_rcvd = threading.Event()
@@ -139,7 +139,7 @@ def connect(
     close_timeout: float | None = 10,
     # Limits
     max_size: int | None = 2**20,
-    max_queue: int | tuple[int, int | None] = 16,
+    max_queue: int | None | tuple[int | None, int | None] = 16,
     # Logging
     logger: LoggerLike | None = None,
     # Escape hatch for advanced customization
@@ -191,7 +191,8 @@ def connect(
         max_queue: High-water mark of the buffer where frames are received.
             It defaults to 16 frames. The low-water mark defaults to ``max_queue
             // 4``. You may pass a ``(high, low)`` tuple to set the high-water
-            and low-water marks.
+            and low-water marks. If you want to disable flow control entirely,
+            you may set it to ``None``, although that's a bad idea.
         logger: Logger for this client.
             It defaults to ``logging.getLogger("websockets.client")``.
             See the :doc:`logging guide <../../topics/logging>` for details.

src/websockets/sync/connection.py

@@ -49,12 +49,12 @@ def __init__(
         protocol: Protocol,
         *,
         close_timeout: float | None = 10,
-        max_queue: int | tuple[int, int | None] = 16,
+        max_queue: int | None | tuple[int | None, int | None] = 16,
     ) -> None:
         self.socket = socket
         self.protocol = protocol
         self.close_timeout = close_timeout
-        if isinstance(max_queue, int):
+        if isinstance(max_queue, int) or max_queue is None:
             max_queue = (max_queue, None)
         self.max_queue = max_queue
 

src/websockets/sync/messages.py

@@ -33,7 +33,7 @@ class Assembler:
 
     def __init__(
         self,
-        high: int = 16,
+        high: int | None = None,
         low: int | None = None,
         pause: Callable[[], Any] = lambda: None,
         resume: Callable[[], Any] = lambda: None,
@@ -49,12 +49,15 @@ def __init__(
         # call to Protocol.data_received() could produce thousands of frames,
         # which must be buffered. Instead, we pause reading when the buffer goes
         # above the high limit and we resume when it goes under the low limit.
-        if low is None:
+        if high is not None and low is None:
             low = high // 4
-        if low < 0:
-            raise ValueError("low must be positive or equal to zero")
-        if high < low:
-            raise ValueError("high must be greater than or equal to low")
+        if high is None and low is not None:
+            high = low * 4
+        if high is not None and low is not None:
+            if low < 0:
+                raise ValueError("low must be positive or equal to zero")
+            if high < low:
+                raise ValueError("high must be greater than or equal to low")
         self.high, self.low = high, low
         self.pause = pause
         self.resume = resume
@@ -260,15 +263,25 @@ def put(self, frame: Frame) -> None:
 
     def maybe_pause(self) -> None:
         """Pause the writer if queue is above the high water mark."""
+        # Skip if flow control is disabled
+        if self.high is None:
+            return
+
         assert self.mutex.locked()
+
         # Check for "> high" to support high = 0
         if self.frames.qsize() > self.high and not self.paused:
             self.paused = True
             self.pause()
 
     def maybe_resume(self) -> None:
         """Resume the writer if queue is below the low water mark."""
+        # Skip if flow control is disabled
+        if self.low is None:
+            return
+
         assert self.mutex.locked()
+
         # Check for "<= low" to support low = 0
         if self.frames.qsize() <= self.low and self.paused:
             self.paused = False

src/websockets/sync/server.py

@@ -66,7 +66,7 @@ def __init__(
         protocol: ServerProtocol,
         *,
         close_timeout: float | None = 10,
-        max_queue: int | tuple[int, int | None] = 16,
+        max_queue: int | None | tuple[int | None, int | None] = 16,
     ) -> None:
         self.protocol: ServerProtocol
         self.request_rcvd = threading.Event()
@@ -356,7 +356,7 @@ def serve(
     close_timeout: float | None = 10,
     # Limits
     max_size: int | None = 2**20,
-    max_queue: int | tuple[int, int | None] = 16,
+    max_queue: int | None | tuple[int | None, int | None] = 16,
     # Logging
     logger: LoggerLike | None = None,
     # Escape hatch for advanced customization
@@ -438,7 +438,8 @@ def handler(websocket):
         max_queue: High-water mark of the buffer where frames are received.
             It defaults to 16 frames. The low-water mark defaults to ``max_queue
             // 4``. You may pass a ``(high, low)`` tuple to set the high-water
-            and low-water marks.
+            and low-water marks. If you want to disable flow control entirely,
+            you may set it to ``None``, although that's a bad idea.
         logger: Logger for this server.
             It defaults to ``logging.getLogger("websockets.server")``. See the
             :doc:`logging guide <../../topics/logging>` for details.

tests/asyncio/test_connection.py

@@ -1066,14 +1066,22 @@ async def test_close_timeout(self):
         self.assertEqual(connection.close_timeout, 42 * MS)
 
     async def test_max_queue(self):
-        """max_queue parameter configures high-water mark of frames buffer."""
+        """max_queue configures high-water mark of frames buffer."""
         connection = Connection(Protocol(self.LOCAL), max_queue=4)
         transport = Mock()
         connection.connection_made(transport)
         self.assertEqual(connection.recv_messages.high, 4)
 
+    async def test_max_queue_none(self):
+        """max_queue disables high-water mark of frames buffer."""
+        connection = Connection(Protocol(self.LOCAL), max_queue=None)
+        transport = Mock()
+        connection.connection_made(transport)
+        self.assertEqual(connection.recv_messages.high, None)
+        self.assertEqual(connection.recv_messages.low, None)
+
     async def test_max_queue_tuple(self):
-        """max_queue parameter configures high-water mark of frames buffer."""
+        """max_queue configures high-water and low-water marks of frames buffer."""
         connection = Connection(
             Protocol(self.LOCAL),
             max_queue=(4, 2),