Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Stop propagating config_settings to dependencies #11941

Merged
merged 4 commits into from
Apr 9, 2023
Merged

Stop propagating config_settings to dependencies #11941

merged 4 commits into from
Apr 9, 2023

Conversation

sbidoul
Copy link
Member

@sbidoul sbidoul commented Apr 9, 2023 •
edited
Loading

This PR follows the discussion around #11915 (comment).

It disables the propagation of config settings to dependencies, for better consistency.

It adds a few more tests for config settings propagation

  • to sdist builds (when the requirement was provided on the CLI as name+specifier)
  • to builds of source tree provided via constraint files (when the requirement was provided on the CLI as name+specifier)
  • to requirements provided via requirements file (no propagation, even if they are a dependency of CLI requirements)
  • to dependencies of CLI requirements (no propagation - this is a change)

Strictly speaking, this is a breaking change. Doing a proper deprecation cycle for this sounds quite complex though. My intuition is that if users had relied on that propagation to dependencies, we would have gotten reports that it broke as soon as a dependency was added to a requirements file.

sbidoul added 3 commits April 9, 2023 13:00
@sbidoul
Add tests for config settings propagation
3fd570b
@sbidoul
Do not propagate config settings to dependencies
ca53d96 
Since config settings do not propagate to
requirements provided via requirements files,
do not propagate them to dependencies either.
@sbidoul
Expand config settings documentation
b79ade7
@sbidoul sbidoul added this to the 23.1 milestone Apr 9, 2023
@sbidoul sbidoul requested a review from pfmoore April 9, 2023 11:07
@sbidoul sbidoul mentioned this pull request Apr 9, 2023
Closed
@pradyunsg pradyunsg changed the title Do not propagate config settings to dependencies. Stop propagating config_settings to dependencies Apr 9, 2023
@pradyunsg
Copy link
Member

Let's do this, and if we see people complaining, we'll know.

@pradyunsg pradyunsg merged commit 7cb863e into pypa:main Apr 9, 2023
@sbidoul sbidoul deleted the config-settings-propagation-sbi branch April 9, 2023 14:46
kai687 pushed a commit to kai687/sphinxawesome-theme that referenced this pull request Apr 16, 2023
@dependabot
chore(deps): Bump pip from 23.0.1 to 23.1 (#1259)
53aa830 
Bumps [pip](https://github.com/pypa/pip) from 23.0.1 to 23.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's
changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>.
(<code>[#11358](pypa/pip#11358)
&lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py
install</code> anymore. Instead a wheel will be
built locally and installed.
(<code>[#11451](pypa/pip#11451)
&lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built
wheels anymore. It only
means &quot;don't download wheels&quot;.
(<code>[#11453](pypa/pip#11453)
&lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and
<code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>.
(<code>[#11859](pypa/pip#11859)
&lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a
<code>pyproject.toml</code> now print
a deprecation warning. In the future the presence of config settings
will automatically
enable the default build backend for legacy projects and pass the
setttings to it.
(<code>[#11915](pypa/pip#11915)
&lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel
failed for projects without
<code>pyproject.toml</code>.
(<code>[#8368](pypa/pip#8368)
&lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses
the default build backend
instead of <code>setup.py install</code> for project without
<code>pyproject.toml</code>.
(<code>[#8559](pypa/pip#8559)
&lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not
match installed location to provide better error message for debugging.
(<code>[#10476](pypa/pip#10476)
&lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice
that is rejected (pass <code>-vv</code> to <code>pip install</code> to
show it) (<code>[#10937](pypa/pip#10937)
&lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line.
(<code>[#11169](pypa/pip#11169)
&lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in
requirements files.
(<code>[#11325](pypa/pip#11325)
&lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now
supports using the same key multiple
times. When the same key is specified multiple times, all values are
passed to
the build backend as a list, as opposed to the previous behavior, where
pip would
only pass the last value if the same key was used multiple times.
(<code>[#11681](pypa/pip#11681)
&lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the
<code>--config-settings</code> option.
(<code>[#11786](pypa/pip#11786)
&lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the
resolver more efficient in finding solutions. This also makes
pathological cases fail quicker.
(<code>[#11908](pypa/pip#11908)
&lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in
a requirements file.
(<code>[#11935](pypa/pip#11935)
&lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build
dependencies. They already did
not propagate to requirements provided in requirement files. To pass the
same config
settings to several requirements, users should provide the requirements
as CLI
arguments. (<code>[#11941](pypa/pip#11941)
&lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>.
(<code>[#5037](pypa/pip#5037)
&lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication
page in the documentation for more info.
(<code>[#8719](pypa/pip#8719)
&lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now
also included from the base installation.
(<code>[#9752](pypa/pip#9752)
&lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot;
to &quot;A new release of pip is available:&quot; in the notice used for
indicating that.
(<code>[#11529](pypa/pip#11529)
&lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH.
(<code>[#11719](pypa/pip#11719)
&lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available.
(<code>[#11774](pypa/pip#11774)
&lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
<li>More consistent resolution backtracking by removing legacy hack
related to setuptools resolution
(<code>[#11837](pypa/pip#11837)
&lt;https://github.com/pypa/pip/issues/11837&gt;</code>_)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a>
Bump for release</li>
<li><a
href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a>
Update AUTHORS.txt</li>
<li><a
href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from
sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a
href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from
sbidoul/cache-hash-checking-sbi</li>
<li><a
href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a>
Further refactor is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a>
Improve test</li>
<li><a
href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a>
Introduce ireq.cached_wheel_source_link</li>
<li><a
href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a>
Add a couple of asserts</li>
<li><a
href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a>
Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a>
Cosmetics</li>
<li>Additional commits viewable in <a
href="https://github.com/pypa/pip/compare/23.0.1...23.1">compare
view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility
score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pip&package-manager=pip&previous-version=23.0.1&new-version=23.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
inmantaci pushed a commit to inmanta/inmanta-core that referenced this pull request Apr 17, 2023
@dependabot @inmantaci
Bump pip from 23.0.1 to 23.1 (PR #5838)
c538218 
Bumps [pip](https://github.com/pypa/pip) from 23.0.1 to 23.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>. (<code>[#11358](pypa/pip#11358) &lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py install</code> anymore. Instead a wheel will be
built locally and installed. (<code>[#11451](pypa/pip#11451) &lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built wheels anymore. It only
means &quot;don't download wheels&quot;. (<code>[#11453](pypa/pip#11453) &lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and <code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>. (<code>[#11859](pypa/pip#11859) &lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a <code>pyproject.toml</code> now print
a deprecation warning. In the future the presence of config settings will automatically
enable the default build backend for legacy projects and pass the setttings to it. (<code>[#11915](pypa/pip#11915) &lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel failed for projects without
<code>pyproject.toml</code>. (<code>[#8368](pypa/pip#8368) &lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses the default build backend
instead of <code>setup.py install</code> for project without <code>pyproject.toml</code>. (<code>[#8559](pypa/pip#8559) &lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not match installed location to provide better error message for debugging. (<code>[#10476](pypa/pip#10476) &lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice that is rejected (pass <code>-vv</code> to <code>pip install</code> to show it) (<code>[#10937](pypa/pip#10937) &lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line. (<code>[#11169](pypa/pip#11169) &lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in requirements files. (<code>[#11325](pypa/pip#11325) &lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now supports using the same key multiple
times. When the same key is specified multiple times, all values are passed to
the build backend as a list, as opposed to the previous behavior, where pip would
only pass the last value if the same key was used multiple times. (<code>[#11681](pypa/pip#11681) &lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the <code>--config-settings</code> option. (<code>[#11786](pypa/pip#11786) &lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the resolver more efficient in finding solutions. This also makes pathological cases fail quicker. (<code>[#11908](pypa/pip#11908) &lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in a requirements file. (<code>[#11935](pypa/pip#11935) &lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build dependencies. They already did
not propagate to requirements provided in requirement files. To pass the same config
settings to several requirements, users should provide the requirements as CLI
arguments. (<code>[#11941](pypa/pip#11941) &lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>. (<code>[#5037](pypa/pip#5037) &lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication page in the documentation for more info. (<code>[#8719](pypa/pip#8719) &lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now also included from the base installation. (<code>[#9752](pypa/pip#9752) &lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot; to &quot;A new release of pip is available:&quot; in the notice used for indicating that. (<code>[#11529](pypa/pip#11529) &lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH. (<code>[#11719](pypa/pip#11719) &lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available. (<code>[#11774](pypa/pip#11774) &lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
<li>More consistent resolution backtracking by removing legacy hack related to setuptools resolution (<code>[#11837](pypa/pip#11837) &lt;https://github.com/pypa/pip/issues/11837&gt;</code>_)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a> Bump for release</li>
<li><a href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a> Update AUTHORS.txt</li>
<li><a href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from sbidoul/cache-hash-checking-sbi</li>
<li><a href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a> Further refactor is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a> Improve test</li>
<li><a href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a> Introduce ireq.cached_wheel_source_link</li>
<li><a href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a> Add a couple of asserts</li>
<li><a href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a> Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a> Cosmetics</li>
<li>Additional commits viewable in <a href="https://github.com/pypa/pip/compare/23.0.1...23.1">compare view</a></li>
</ul>
</details>
<br />

[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pip&package-manager=pip&previous-version=23.0.1&new-version=23.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

</details>
mergify bot pushed a commit to aws/jsii that referenced this pull request Apr 17, 2023
@dependabot
chore(deps): Update pip requirement from ~=23.0 to ~=23.1 in /package…
5efb5ea 
…s/@jsii/python-runtime (#4060)

Updates the requirements on [pip](https://github.com/pypa/pip) to permit the latest version.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>. (<code>[#11358](pypa/pip#11358) &lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py install</code> anymore. Instead a wheel will be
built locally and installed. (<code>[#11451](pypa/pip#11451) &lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built wheels anymore. It only
means &quot;don't download wheels&quot;. (<code>[#11453](pypa/pip#11453) &lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and <code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>. (<code>[#11859](pypa/pip#11859) &lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a <code>pyproject.toml</code> now print
a deprecation warning. In the future the presence of config settings will automatically
enable the default build backend for legacy projects and pass the setttings to it. (<code>[#11915](pypa/pip#11915) &lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel failed for projects without
<code>pyproject.toml</code>. (<code>[#8368](pypa/pip#8368) &lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses the default build backend
instead of <code>setup.py install</code> for project without <code>pyproject.toml</code>. (<code>[#8559](pypa/pip#8559) &lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not match installed location to provide better error message for debugging. (<code>[#10476](pypa/pip#10476) &lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice that is rejected (pass <code>-vv</code> to <code>pip install</code> to show it) (<code>[#10937](pypa/pip#10937) &lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line. (<code>[#11169](pypa/pip#11169) &lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in requirements files. (<code>[#11325](pypa/pip#11325) &lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now supports using the same key multiple
times. When the same key is specified multiple times, all values are passed to
the build backend as a list, as opposed to the previous behavior, where pip would
only pass the last value if the same key was used multiple times. (<code>[#11681](pypa/pip#11681) &lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the <code>--config-settings</code> option. (<code>[#11786](pypa/pip#11786) &lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the resolver more efficient in finding solutions. This also makes pathological cases fail quicker. (<code>[#11908](pypa/pip#11908) &lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in a requirements file. (<code>[#11935](pypa/pip#11935) &lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build dependencies. They already did
not propagate to requirements provided in requirement files. To pass the same config
settings to several requirements, users should provide the requirements as CLI
arguments. (<code>[#11941](pypa/pip#11941) &lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>. (<code>[#5037](pypa/pip#5037) &lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication page in the documentation for more info. (<code>[#8719](pypa/pip#8719) &lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now also included from the base installation. (<code>[#9752](pypa/pip#9752) &lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot; to &quot;A new release of pip is available:&quot; in the notice used for indicating that. (<code>[#11529](pypa/pip#11529) &lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH. (<code>[#11719](pypa/pip#11719) &lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available. (<code>[#11774](pypa/pip#11774) &lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
<li>More consistent resolution backtracking by removing legacy hack related to setuptools resolution (<code>[#11837](pypa/pip#11837) &lt;https://github.com/pypa/pip/issues/11837&gt;</code>_)</li>
</ul>

</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a> Bump for release</li>
<li><a href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a> Update AUTHORS.txt</li>
<li><a href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from sbidoul/cache-hash-checking-sbi</li>
<li><a href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a> Further refactor is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a> Improve test</li>
<li><a href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a> Introduce ireq.cached_wheel_source_link</li>
<li><a href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a> Add a couple of asserts</li>
<li><a href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a> Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a> Cosmetics</li>
<li>Additional commits viewable in <a href="https://github.com/pypa/pip/compare/23.0...23.1">compare view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>
inmantaci pushed a commit to inmanta/inmanta-core that referenced this pull request Apr 18, 2023
@dependabot @inmantaci
Bump pip from 23.0.1 to 23.1 (PR #5848)
f1d75e0 
Bumps [pip](https://github.com/pypa/pip) from 23.0.1 to 23.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>. (<code>[#11358](pypa/pip#11358) &lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py install</code> anymore. Instead a wheel will be
built locally and installed. (<code>[#11451](pypa/pip#11451) &lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built wheels anymore. It only
means &quot;don't download wheels&quot;. (<code>[#11453](pypa/pip#11453) &lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and <code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>. (<code>[#11859](pypa/pip#11859) &lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a <code>pyproject.toml</code> now prints
a deprecation warning. In the future the presence of config settings will automatically
enable the default build backend for legacy projects and pass the setttings to it. (<code>[#11915](pypa/pip#11915) &lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel failed for projects without
<code>pyproject.toml</code>. (<code>[#8368](pypa/pip#8368) &lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses the default build backend
instead of <code>setup.py install</code> and <code>setup.py develop</code> for project without
<code>pyproject.toml</code>. (<code>[#8559](pypa/pip#8559) &lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not match installed location to provide better error message for debugging. (<code>[#10476](pypa/pip#10476) &lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice that is rejected (pass <code>-vv</code> to <code>pip install</code> to show it) (<code>[#10937](pypa/pip#10937) &lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line. (<code>[#11169](pypa/pip#11169) &lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in requirements files. (<code>[#11325](pypa/pip#11325) &lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now supports using the same key multiple
times. When the same key is specified multiple times, all values are passed to
the build backend as a list, as opposed to the previous behavior, where pip would
only pass the last value if the same key was used multiple times. (<code>[#11681](pypa/pip#11681) &lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the <code>--config-settings</code> option. (<code>[#11786](pypa/pip#11786) &lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the resolver more efficient in finding solutions. This also makes pathological cases fail quicker. (<code>[#11908](pypa/pip#11908) &lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in a requirements file. (<code>[#11935](pypa/pip#11935) &lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build dependencies. They already did
not propagate to requirements provided in requirement files. To pass the same config
settings to several requirements, users should provide the requirements as CLI
arguments. (<code>[#11941](pypa/pip#11941) &lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>. (<code>[#5037](pypa/pip#5037) &lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication page in the documentation for more info. (<code>[#8719](pypa/pip#8719) &lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now also included from the base installation. (<code>[#9752](pypa/pip#9752) &lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot; to &quot;A new release of pip is available:&quot; in the notice used for indicating that. (<code>[#11529](pypa/pip#11529) &lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH. (<code>[#11719](pypa/pip#11719) &lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available. (<code>[#11774](pypa/pip#11774) &lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a> Bump for release</li>
<li><a href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a> Update AUTHORS.txt</li>
<li><a href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a> Merge pull request <a href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from sbidoul/cache-hash-checking-sbi</li>
<li><a href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a> Further refactor is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a> Improve test</li>
<li><a href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a> Introduce ireq.cached_wheel_source_link</li>
<li><a href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a> Add a couple of asserts</li>
<li><a href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a> Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a> Cosmetics</li>
<li>Additional commits viewable in <a href="https://github.com/pypa/pip/compare/23.0.1...23.1">compare view</a></li>
</ul>
</details>
<br />

[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=pip&package-manager=pip&previous-version=23.0.1&new-version=23.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

</details>
ludeeus pushed a commit to ludeeus/integration_blueprint that referenced this pull request Apr 22, 2023
@dependabot
Update pip requirement from <23.1,>=21.0 to >=21.0,<23.2 (#100)
a577f2e 
Updates the requirements on [pip](https://github.com/pypa/pip) to permit
the latest version.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a
href="https://github.com/pypa/pip/blob/main/NEWS.rst">pip's
changelog</a>.</em></p>
<blockquote>
<h1>23.1 (2023-04-15)</h1>
<h2>Deprecations and Removals</h2>
<ul>
<li>Remove support for the deprecated <code>--install-options</code>.
(<code>[#11358](pypa/pip#11358)
&lt;https://github.com/pypa/pip/issues/11358&gt;</code>_)</li>
<li><code>--no-binary</code> does not imply <code>setup.py
install</code> anymore. Instead a wheel will be
built locally and installed.
(<code>[#11451](pypa/pip#11451)
&lt;https://github.com/pypa/pip/issues/11451&gt;</code>_)</li>
<li><code>--no-binary</code> does not disable the cache of locally built
wheels anymore. It only
means &quot;don't download wheels&quot;.
(<code>[#11453](pypa/pip#11453)
&lt;https://github.com/pypa/pip/issues/11453&gt;</code>_)</li>
<li>Deprecate <code>--build-option</code> and
<code>--global-option</code>. Users are invited to switch to
<code>--config-settings</code>.
(<code>[#11859](pypa/pip#11859)
&lt;https://github.com/pypa/pip/issues/11859&gt;</code>_)</li>
<li>Using <code>--config-settings</code> with projects that don't have a
<code>pyproject.toml</code> now prints
a deprecation warning. In the future the presence of config settings
will automatically
enable the default build backend for legacy projects and pass the
setttings to it.
(<code>[#11915](pypa/pip#11915)
&lt;https://github.com/pypa/pip/issues/11915&gt;</code>_)</li>
<li>Remove <code>setup.py install</code> fallback when building a wheel
failed for projects without
<code>pyproject.toml</code>.
(<code>[#8368](pypa/pip#8368)
&lt;https://github.com/pypa/pip/issues/8368&gt;</code>_)</li>
<li>When the <code>wheel</code> package is not installed, pip now uses
the default build backend
instead of <code>setup.py install</code> and <code>setup.py
develop</code> for project without
<code>pyproject.toml</code>.
(<code>[#8559](pypa/pip#8559)
&lt;https://github.com/pypa/pip/issues/8559&gt;</code>_)</li>
</ul>
<h2>Features</h2>
<ul>
<li>Specify egg-link location in assertion message when it does not
match installed location to provide better error message for debugging.
(<code>[#10476](pypa/pip#10476)
&lt;https://github.com/pypa/pip/issues/10476&gt;</code>_)</li>
<li>Present conflict information during installation after each choice
that is rejected (pass <code>-vv</code> to <code>pip install</code> to
show it) (<code>[#10937](pypa/pip#10937)
&lt;https://github.com/pypa/pip/issues/10937&gt;</code>_)</li>
<li>Display dependency chain on each Collecting/Processing log line.
(<code>[#11169](pypa/pip#11169)
&lt;https://github.com/pypa/pip/issues/11169&gt;</code>_)</li>
<li>Support a per-requirement <code>--config-settings</code> option in
requirements files.
(<code>[#11325](pypa/pip#11325)
&lt;https://github.com/pypa/pip/issues/11325&gt;</code>_)</li>
<li>The <code>--config-settings</code>/<code>-C</code> option now
supports using the same key multiple
times. When the same key is specified multiple times, all values are
passed to
the build backend as a list, as opposed to the previous behavior, where
pip would
only pass the last value if the same key was used multiple times.
(<code>[#11681](pypa/pip#11681)
&lt;https://github.com/pypa/pip/issues/11681&gt;</code>_)</li>
<li>Add <code>-C</code> as a short version of the
<code>--config-settings</code> option.
(<code>[#11786](pypa/pip#11786)
&lt;https://github.com/pypa/pip/issues/11786&gt;</code>_)</li>
<li>Reduce the number of resolver rounds, since backjumping makes the
resolver more efficient in finding solutions. This also makes
pathological cases fail quicker.
(<code>[#11908](pypa/pip#11908)
&lt;https://github.com/pypa/pip/issues/11908&gt;</code>_)</li>
<li>Warn if <code>--hash</code> is used on a line without requirement in
a requirements file.
(<code>[#11935](pypa/pip#11935)
&lt;https://github.com/pypa/pip/issues/11935&gt;</code>_)</li>
<li>Stop propagating CLI <code>--config-settings</code> to the build
dependencies. They already did
not propagate to requirements provided in requirement files. To pass the
same config
settings to several requirements, users should provide the requirements
as CLI
arguments. (<code>[#11941](pypa/pip#11941)
&lt;https://github.com/pypa/pip/issues/11941&gt;</code>_)</li>
<li>Support wheel cache when using <code>--require-hashes</code>.
(<code>[#5037](pypa/pip#5037)
&lt;https://github.com/pypa/pip/issues/5037&gt;</code>_)</li>
<li>Add <code>--keyring-provider</code> flag. See the Authentication
page in the documentation for more info.
(<code>[#8719](pypa/pip#8719)
&lt;https://github.com/pypa/pip/issues/8719&gt;</code>_)</li>
<li>In the case of virtual environments, configuration files are now
also included from the base installation.
(<code>[#9752](pypa/pip#9752)
&lt;https://github.com/pypa/pip/issues/9752&gt;</code>_)</li>
</ul>
<h2>Bug Fixes</h2>
<ul>
<li>Fix grammar by changing &quot;A new release of pip available:&quot;
to &quot;A new release of pip is available:&quot; in the notice used for
indicating that.
(<code>[#11529](pypa/pip#11529)
&lt;https://github.com/pypa/pip/issues/11529&gt;</code>_)</li>
<li>Normalize paths before checking if installed scripts are on PATH.
(<code>[#11719](pypa/pip#11719)
&lt;https://github.com/pypa/pip/issues/11719&gt;</code>_)</li>
<li>Correct the way to decide if keyring is available.
(<code>[#11774](pypa/pip#11774)
&lt;https://github.com/pypa/pip/issues/11774&gt;</code>_)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a
href="https://github.com/pypa/pip/commit/6424ac4600265490462015c2fc7f9a402dba9ed8"><code>6424ac4</code></a>
Bump for release</li>
<li><a
href="https://github.com/pypa/pip/commit/868338f9f79b58eff34dafb168aed65480d080d5"><code>868338f</code></a>
Update AUTHORS.txt</li>
<li><a
href="https://github.com/pypa/pip/commit/4f3a4f72697299da1a412cf10c919a989e0692f5"><code>4f3a4f7</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11919">#11919</a> from
sbidoul/deprecate-legacy-ignore-config-setting...</li>
<li><a
href="https://github.com/pypa/pip/commit/dbf4e6842c9603792f6d3944a5c9cec17bd0a92a"><code>dbf4e68</code></a>
Merge pull request <a
href="https://redirect.github.com/pypa/pip/issues/11897">#11897</a> from
sbidoul/cache-hash-checking-sbi</li>
<li><a
href="https://github.com/pypa/pip/commit/efe2d27451d50b165df78093bf5885da713fbdf8"><code>efe2d27</code></a>
Further refactor is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/4beca6b4c9c510b19dbb6180e962425b89e8c839"><code>4beca6b</code></a>
Improve test</li>
<li><a
href="https://github.com/pypa/pip/commit/bd746e3136e5e1be2374a079bac66071dd967a8c"><code>bd746e3</code></a>
Introduce ireq.cached_wheel_source_link</li>
<li><a
href="https://github.com/pypa/pip/commit/caafe6e87d4f2998a77b194297e1c204cf6e10c2"><code>caafe6e</code></a>
Add a couple of asserts</li>
<li><a
href="https://github.com/pypa/pip/commit/a6ef6485be9512f18121298b058797c578f65d45"><code>a6ef648</code></a>
Rename original_link_is_in_wheel_cache to is_wheel_from_cache</li>
<li><a
href="https://github.com/pypa/pip/commit/ff8c8e38887880ad81ffd7cfc6a8373213c087b7"><code>ff8c8e3</code></a>
Cosmetics</li>
<li>Additional commits viewable in <a
href="https://github.com/pypa/pip/compare/21.0...23.1">compare
view</a></li>
</ul>
</details>
<br />


Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)


</details>

Signed-off-by: dependabot[bot] <[email protected]>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
@github-actions github-actions bot locked as resolved and limited conversation to collaborators Apr 25, 2023
Sign up for free to subscribe to this conversation on GitHub. Already have an account? Sign in.
Reviewers

@pradyunsg pradyunsg pradyunsg approved these changes

@pfmoore pfmoore Awaiting requested review from pfmoore

Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
23.1
Development

Successfully merging this pull request may close these issues.
2 participants
@sbidoul @pradyunsg