A telescope that I designed at 15.
Electronics
- Arduino-based controller;
- Three synchronous electric motor (for pitch, yaw, elevation);
- One active-pixel sensor;
- ...
PM Primary Mirror f/1,45 (= F/D) F = 2,175 m D = 1,500 m d = 0,300 m (18 hexagonal segments) Reported diameter "d" is relative to circonference tangent each side of the hexagon. The C3 segment is holed in order to make room for the AOS. Shape: Parabolic hexagon
SM Secondary Mirror f/13,3 (= F/D) F = 1,867 m D = 0,140 m Shape: Hyperbolic dish
System (PM + SM) | f/20
AOS Aft Optical Subsystem Contains the electronics.