This is a library for the SparkFun BME280 Humidity, Barometric Pressure + Temp sensor
Particle Photon, Core & Electorn Library based on Sparkfun Arduino Library for BME280 sensors adapted by Markus Haack
Designed specifically to work with the SparkFun BME280 (SEN-13676)
Works with the following BME280-Breakouts as well:
- http://www.watterott.com/en/BME280-Breakout-humidity-pressure-temperature-sensor
- http://www.adafruit.com/products/2652
This library allows the user to:
- Read pressure in Pa
- Read temperature in C
- Read humidity in %RH
It also provides the following mathematical functions based from the above.
- Read temperature in F
- Read altitude in meters
- Read altitude in feet
Some examples include a circular buffer class for averaging.
- /examples - Example sketches for the library (.ino). Run these from the Arduino IDE.
- /src - Source files for the library (.cpp, .h).
- library.properties - General library properties for the Arduino package manager.
- Installing an Arduino Library Guide - Basic information on how to install an Arduino library.
- Product Repository - Main repository (including hardware files) for the SparkFun BME280 Breakout.
- Hookup Guide - Basic hookup guide for the SparkFun BME280 Breakout.
- V_1.0.0 - October 2015 Initial Release
- V_1.1.1 - January 2017 migrated to V2 library, pulled minor changes
Original Arduino library: https://github.com/sparkfun/SparkFun_BME280_Arduino_Library
This product is open source!
Please review the LICENSE.md file for license information.
If you have any questions or concerns on licensing, please contact [email protected].
Distributed as-is; no warranty is given.