MMM-PIR

MMM-PIR is a module for the MagicMirror project by Michael Teeuw.

It uses a PIR sensor attached to your raspberry pi's GPIO pins to check for users. After a configurated time without any user interaction the display will turn off. You can specify additional scripts (sh, python and js are supported) that will run after the timeout.

Screenshot

Installation

Cline the module into your MagicMirror module folder and execute npm install in the module's directory-.

git clone https://github.com/mboskamp/MMM-PIR.git
cd MMM-PIR
npm install

Configuration

To display the module insert it in the config.js file. Here is an example:

{
    module: 'MMM-PIR',
    position: 'bottom_center',
    config: {
        sensorPin: 4,
        delay: 10000,
        turnOffDisplay: true,
        showCountdown: true,
        callbackScripts: ["callback.py"]
    }
}

Option	Description	Type	Default
sensorPin	BCM-number of the pin	Integer	4
delay	time before the mirror turns off the display if no user activity is detected. (in ms)	Integer	10000 (10 seconds)
turnOffDisplay	Should the display turn off after timeout?	Boolean	true
showCountdown	Should the MagicMirror display the countdown on screen?	Boolean	true
callbackScripts	Scripts that execute after the timeout. Scripts must be placed inside the callbackScripts folder. Supported script types: sh, py, js	Array of strings	none

Telegram commands

You can control this module via Telegram with the following commands. Note: You need to install MMM-TelegramBot

Command	Description
/resetPir	Resets the countdown to configured settings.
/resetPirDefaults	Reset the countdown to default settings.
/setCustomPirCountdown	Configure a custom countdown (in seconds).