Skip to content
/ vyxos Public

My laptop and server Nix configuration.

65 stars 1 fork Branches Tags Activity
Star
Notifications You must be signed in to change notification settings

kivikakk/vyxos

BranchesTags

Repository files navigation

VyxOS

This is a nix-darwin and NixOS configuration in flake format. It's evolved a lot over time, but unfortunately I don't have time to scrub 850 commits for secrets, so I decided to start history over while funnelling private stuff into a submodule. The config has contracted enormously in the last few months, so what's left is what I really depend upon!

A description of the basic layout follows.

  • flake.nix — entrypoint. I use 24.11 on both Darwin and NixOS. Load common config, our modules, host-specific config, Home Manager, and custom jj build.
  • common.nix — enables nix (or "nix3"), flakes, and flake repl. Ensures git is in the system closure, since it's needed for building flakes.
  • modules — root of VyxOS modules. Host data is loaded from hosts.toml, which supplies values used all over.
    • modules/secrets — secrets management. Provides a simple interface to sops-nix and installs SSH public and private keys. Secrets are stored in private/ and encrypted with sops-nix.
    • modules/fish — Fish custom build and baseline configuration. I adjust alias to let my git aliases tab-complete. A prompt is installed and some aliases to rebuild VyxOS and use Nix fluently. Nix profile paths are added to PATH on Darwin.
    • modules/nix — configure extra dependencies in nix-darwin like we can in NixOS. (Thanks!)
    • modules/cowsay — custom Cowsay build. For reasons.
    • modules/net — networking configuration for NixOS hosts. This sets the host up based on its hosts.toml data.
    • modules/nginx — a simple interface to configuring vhosts for Nginx, also allowing inclusion of site content as part of the Nix build. Also ensures all vhosts get great 502 behaviour.
    • modules/desktop — configuration for "desktop" NixOS use.
      • Iosevka Term Slab Extended thankyouverymuch.
  • hosts — host-specific config.
    • hosts/seraphim.nix — configures my Macbook (on nix-darwin). Anything macOS-specific goes here.
      • I used to be extremely Serious about not installing anything outside of Nix unless absolutely possible, but I loosened up a lot, so there's also things like sourcing asdf, adding ~/.cargo/bin to PATH and stuff like that.
      • Homebrew is configured declaratively, which is really nice — I'll often brew install something manually just to try it out, and let my next rebuild GC it, or add it to the config if I decide to keep it.
      • Comenzar is enabled.
    • hosts/seraphim-r.nix — additional configuration for working with a particular client.
    • hosts/piret.nix — configures my Framework (on NixOS).
      • Compared to seraphim, devtools here are done entirely within Nix.
      • Comenzar is enabled.
    • hosts/kala.nix — configures my VPS (on NixOS).
      • Hardware config is stuffed up the top, pulled from a nixos-infect-generated hardware-configuration.nix.
      • Pulls in sites/, documented below.
      • furpoll is enabled and configured.
      • A baseline vhost for the server's FQDN itself is set which just returns a 502. (This is important.)
      • Tailscale is enabled.
      • OpenSMTPD is configured. It is such a breath of fresh air to configure.
  • home.nix — Home Manager config module for the "default" user (i.e. me!). Loads submodules and installs baseline packages.
  • sites — web sites, and the services associated with them.

Git aliases

Note

I'm almost exclusively using jj now, so while the below still represents how I use git, I don't tend to use it directly all that much any more! Here's a post about jujutsu. home/fish.nix includes jj aliases similar to the below, but they're undergoing active refinement as my use increases!

Firstly, for all our git aliases, we create a shell alias that matches it; i.e. if you have git c defined for commit, then it's enough to type c at the shell instead.

This isn't overkill — I talk a bit about this early in Nix revisited, but I'd like to elaborate now: Git is a Swiss Army knife. It's way better than what came before it in lots of ways, and I'm sure (and glad) folks are improving on it, but I'm very comfy with it, and not because I've abstracted it all away from me so I don't have to think about it, but because I brought it close enough that all its little implements (continuing with the SAK analogy) are like my own fingers. Err. Or something.

Have a look at home/git-aliases.nix. Everything's split into groups of related aliases. Remember that these are all promoted to shell aliases in their own right, so (as documented in Nix revisited) where necessary I adjust the alias to move out of the way of a common shell utility (like cp ~> pc). There are some utilities I don't care about and happily displace; that's what command and builtin are for.

  • cl: clone. I pull down a lot of new code! (Don't use this for multiple working trees, or multiple remotes.)
  • co: checkout. Something I find myself doing a lot is co BLAH^ -- x/y/z if I found I removed x/y/z in commit BLAH and want to reintroduce it (but I don't want to revert all of BLAH). Of course, co jkl or co - to change branches are the main use.
    • cb: checkout -b. Branches are extremely lightweight, use them constantly! Use them to slap temporary names on things while you shift things around (so you don't have to hunt in the reflog, but you always can do that too), to track remotes, all over.
    • pc: checkout -p. Interactively checkout hunks. I'll do this when I want to get rid of some debugging stuff I don't need any more, often cycling between pc and a to remove and stage alternately. You can give a path to restrict the scope if you know what you want to revert parts of.
  • s: status -sb. Default to short output, with branch/tracking info. Making the output short is key to ensuring you can call it as freely as ls (which I alias to .!); if it's long, the feeling of loss of context will act as counterpressure, which makes it easy to feel disconnected from the state of your repo/working tree/index.
  • b: branch. Branch ops, but also just to list local branches by itself.
    • ba: branch -a. Include remotes.
    • bd: branch -d. Delete a branch.
    • bdd: branch -D. Really delete a branch. Part of branches being lightweight is not just "easy to create" but "easy to delete" (and recreate again if you need to!). Otherwise they accumulate and become the very opposite.
  • h: show. (s was taken, so we go to the second letter.)
    • h1: show HEAD^.
    • h2: show HEAD^^.
    • … h5: show HEAD^^^^^. If I've gotten to this stage I need to find a better point of reference, but they do come in handy for quickly retracing steps.
  • d: diff. Use it often. Consider also d -w to ignore whitespace.
    • dch: diff --cached. Shows the diff between the index (staging area) and HEAD; i.e. what you would commit if you hit c.
  • l: log --show-notes='*' --abbrev-commit --pretty=format:'%Cred%h %Cgreen(%aD)%Creset -%C(bold red)%d%Creset %s %C(bold blue)<%an>% cm%Creset' --graph.
    • Yes, really.
    • This is probably one of the most important ones. For the same reason as "short status" above, actually condensing log info into short lines with the tree structure visible is super important for having a feel about the shape of your repo and where exactly you're peeking into it from.
    • la is the same but with --all added; this means you can see remote tracking branches, branches you're not on, etc., which gives an even wider overview.
    • lp adds --patch, which includes the full diff of each commit between the lines. I'll use this pretty often when looking at where references to certain items have been added and removed over time across a repository; if it's all in one file or subtree, lp x/y/z works great too.
  • a: add -p. The default is always to use the patch interface to stage hunks incrementally. You want this to be your default. Know what you're committing.
    • Seriously, in a work situation, in a hobby project situation, in a tiny throwaway whatever, know what you're committing. You can't accidentally commit a TODO if you look at every line before you put it in a commit.
    • Short on time or motivation? Sure, ad . && cm blah and call it a day. Tomorrow you r HEAD^, a and split it out properly.
    • ad: add. For when you want to add whole files or directories. a is my default, but I still need ad because this is a Swiss Army knife, not a nanny.
  • mrm: rm. Because rm was taken.
    • mrc: rm --cached. Remove a file from the index, without touching the working tree; "unstage" a file. You'll need mrc -f a fair bit of the time.
  • c: commit. Use this often, since you'll have interactively staged with a and want to write a long commit message in $EDITOR.
    • cm: commit -m. More often for quick shots: cm wip, cm fixup, cm 'v0.26.0.', etc.
    • cx: commit --amend. You forgot to stage one little hunk of a file? a && cx, no wuckas.
    • pcp: cherry-pick. This is conceptually similar to committing, so I include it here! I use this when I'm doing a drawn-out "manual" rebase, or when I simply have one commit to pull from elsewhere. It's handy to have at hand so you can easily pcp --abort if you don't like a conflict.
  • m: merge.
    • mnf: merge --no-ff. When you're merging something that could be a fast-forward and you don't want it to be; this results in a merge commit like a PR merge on GitHub.
  • r: reset. Use this a lot. By default with no arguments, this "unstages" everything by resetting the index to match HEAD, leaving your working tree untouched. With a commit argument, it resets both the index and the current branch HEAD to the commit given (which can be a branch name or tag), still leaving the working tree untouched. This means you can essentially rewind a branch to a different point in time, without disrupting your work.
    • In other words, a poor man's "squash the last 5 commits" looks like r HEAD~5 && ad . && c. (This also includes your working tree at the time of starting, note.)
    • rh: reset --hard. This is as the above, but also resets the working tree.
    • You like what you did in subdirectory plant/ as of the current commit, but otherwise you want to drop the last 3 commits, and condense the plant changes? cb yummy-plant && co - && rh HEAD^^^ && co yummy-plant -- plant/ && bdd yummy-plant && c. It's free real estate. (You can skip the branch creation and just plonk HEAD's SHA into your clipboard before starting, or even use HEAD@{n}!)
  • en: revert. For introducing a revert commit.
  • rb: rebase. Bringing some changes up to date.
    • ri: rebase -i. For carefully bringing changes up to date, or moreover for rewriting history. Use this to condense commits, drop commits, pull commits apart, anything you so desire.
    • rbc: rebase --continue. Continue a rebase after editing a commit or addressing conflicts. You might also need rb --skip if a commit doesn't result in any change on the new base.
    • rba: rebase --abort. Rewind all changes made to before you started your last rebase.
  • w: push. The mnemonic is "write".
    • wf: push -f. If you enjoy revising history as much as I do, you will find this helpful. All the usual nonsense applies: don't rewrite history of branches others are working on unless you have a really good thing going.
    • wo: push origin. Particularly useful with wo :xyz to delete branches and tags on the remote named origin.
    • wu: push -u. Set the local branch to track the remote.
  • v: pull. The mnemonic is "v is next to w on Dvorak" (:
  • f: fetch.
    • fa: fetch --all. Fetch all remotes.
  • rv: remote -v. Lists remotes.
    • ra: remote add. Add a new remote. I do this when fetching a new long-term collaborator's changes, or adding my own fork (or an upstream to my existing fork).
    • rp: remote prune. Prune a remote; i.e. delete tracking branches that don't exist on it.
    • rpo: remote prune origin. Prune the origin remote.
    • rpa: fetch --all --prune. Fetches all remotes, pruning them in the process. (The fact that this also fetches is Fine. Fetching is not dangergoose.)
  • st: stash. Stashes all local changes. You can also just make a temporary commit and use reset shenanigans, but stash is often faster, and by default preserves your index and working tree separately. (Try la after a stash to see refs/stash.)
    • st -p is helpful if you want to partially stash some stuff, before committing (and perhaps reverting) some others.
    • sth: stash show -p. We add -p as, by default, stash show doesn't actually show you the diff of the stashed change. (The h mnemonic is preserved from our top-level h alias.)
    • stl: stash list.
    • std: stash drop. Drops the latest stash (or stash reference). Note that the commit reference it gives you can be given to sta until it's garbage collected, so it's no big deal if you do this by accident.
    • stp: stash pop. Applies the latest stash (or stash reference), and then drops the stash if it applied without conflict.
    • sta: stash apply. Applies the latest stash (or argument), but the argument doesn't have to be an explicit stash reference (since it doesn't need to be a valid stash to drop, unlike with pop).
  • sms: submodule sync --recursive. Sync submodule remotes with .gitmodules.
    • smu: submodule update --init --recursive. Use this to initially get and update submodules over time.
  • bl: blame.

SSH aliases

Similar to above, a shell alias is created for every host defined in hosts.toml; i.e. typing kala is enough to ssh kala.

vyxnix

Similar to git, I need the Nix tools closer to hand. vyxnix is the launcher that makes that happen; combine it with a range of aliases and baby you've got yourself a stew.

It mostly documents itself, so I'm going to just repeat the header comments:

# Principal nix3 launcher.
#
# "develop" and "shell" are treated specially:
# vyxnix develop                  -> nix develop --command fish
# vyxnix develop x y z            -> nix develop x y z --command fish
# vyxnix develop x -- y z         -> nix develop x --command fish -c "y z"
# vyxnix develop x --command y z  -> nix develop x --command y z
# "d/s" below refers to these cases.
#
# "run" is also treated specially:
# vyxnix run xyz                  -> nix run nixpkgs#xyz
# vyxnix run abc#def              -> nix run abc#def
# vyxnix run uvw -- nyonk         -> nix run nixpkgs#uvw -- nyonk
#
# !x=y translates to --override-input x y.
# Default options (specify --vyx-no-defaults to omit):
set -f defaultargs -L --keep-going

# Specify --vyx-dry-run to echo the command that would be executed.

In practice this means (modulo the defaultargs mentioned above):

  • nd -- make is equivalent to nix develop --command fish -c "make".
  • nb !nixpkgs=~/g/nixpkgs is equivalent to nix build --override-input nixpkgs ~/g/nixpkgs.
  • nf is equivalent to nix fmt.
  • nr htop is equivalent to nix run nixpkgs#htop.

The default args are also really helpful — I almost never remember to include -L or --keep-going until a long build has failed and I wish I already had.

The really nice thing about using Fish everywhere, too, is that vyxnix and aliases using it all support tab-completion correctly, including the --vyx options. If they didn't, I'd want to use them a lot less, and keep forgetting the exact --vyx options since they're so rarely wanted.

J

This is like vyxnix, but for jj! J is a simple launcher which makes a few options nearer to hand:

# !i -> --ignore-immutable
# !b -> --allow-backwards
# !p -> --no-pager
# !ae -> --reset-author --no-edit

This allows for scenarios like the following:

$ Aq
Error: Commit 063ff6e65ac0 is immutable
Hint: Pass `--ignore-immutable` or configure the set of immutable commits via `revset-aliases.immutable_heads()`.
$ Aq !i
Working copy now at: vwsmmryz dde83cf9 (empty) (no description set)
Parent commit      : qoqluvpo 4921e89b main* | README: update for jj.

About

My laptop and server Nix configuration.

Resources

Readme
Activity

Stars

65 stars

Watchers

2 watching

Forks

1 fork
Report repository

Contributors 2

  •  
  •  

Languages