Skip to content

If you use Ecowitt sensors with a GW1000 gateway, you can use this plugin to integrate their readings with your boat network. Requires Signal K server.

License

Notifications You must be signed in to change notification settings

itemir/signalk-ecowitt

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

9 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Signal K plugin for Ecowitt GW1000 Gateway

This plugin integrates Ecowitt GW1000 Wifi Gateway into a Signal K network. It currently supports inside temperature, humidity, outside pressure and three additional temperature and humidity sensors that can be configured for outside, refrigerator, main cabin etc. It also supports wind instruments if present.

The plugin starts an HTTP server on the specified port (default 1923). You need to configure GW1000 for a customized server. Choose the IP address of the Signal K server, set the port to your specified port and "Protocol Type" to Ecowitt. Path will not matter. HTTP server is not secured nor does it require authentication, so it is highly recommended to only use it on a local network.

About

If you use Ecowitt sensors with a GW1000 gateway, you can use this plugin to integrate their readings with your boat network. Requires Signal K server.

Topics

Resources

License

Stars

Watchers

Forks

Packages

No packages published