🎉 New Connector: Fleetio source

.github/workflows/terminate-zombie-build-instances.yml

@@ -2,7 +2,7 @@
 # Also a failsafe against a dev writing a workflow that does not terminate build instances.
 # Though the average Airbyte build runtime as of this commit is ~20 mins, connector builds
 # can take up to 3 hours. Set this to 3 hours to include these longer runs.
-name: Terminate Zombie Build Instances
+- name: Terminate Zombie Build Instances
 
 on:
   workflow_dispatch:

airbyte-integrations/connectors/source-fleetio/.dockerignore

@@ -0,0 +1,6 @@
+*
+!Dockerfile
+!main.py
+!source_fleetio
+!setup.py
+!secrets

airbyte-integrations/connectors/source-fleetio/Dockerfile

@@ -0,0 +1,38 @@
+FROM python:3.9.11-alpine3.15 as base
+
+# build and load all requirements
+FROM base as builder
+WORKDIR /airbyte/integration_code
+
+# upgrade pip to the latest version
+RUN apk --no-cache upgrade \
+    && pip install --upgrade pip \
+    && apk --no-cache add tzdata build-base
+
+
+COPY setup.py ./
+# install necessary packages to a temporary folder
+RUN pip install --prefix=/install .
+
+# build a clean environment
+FROM base
+WORKDIR /airbyte/integration_code
+
+# copy all loaded and built libraries to a pure basic image
+COPY --from=builder /install /usr/local
+# add default timezone settings
+COPY --from=builder /usr/share/zoneinfo/Etc/UTC /etc/localtime
+RUN echo "Etc/UTC" > /etc/timezone
+
+# bash is installed for more convenient debugging.
+RUN apk --no-cache add bash
+
+# copy payload code only
+COPY main.py ./
+COPY source_fleetio ./source_fleetio
+
+ENV AIRBYTE_ENTRYPOINT "python /airbyte/integration_code/main.py"
+ENTRYPOINT ["python", "/airbyte/integration_code/main.py"]
+
+LABEL io.airbyte.version=0.1.0
+LABEL io.airbyte.name=airbyte/source-fleetio

airbyte-integrations/connectors/source-fleetio/README.md

@@ -0,0 +1,85 @@
+# Fleetio Source
+
+This is the repository for the Fleetio configuration based source connector.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.com/integrations/sources/fleetio).
+
+## Overview
+View the Fleetio website [here](https://fleetio.com). For for information the Fleetio API, check out out [Fleetio API Portal](https://developer.fleetio.com).
+
+## Local development
+
+#### Building via Gradle
+You can also build the connector in Gradle. This is typically used in CI and not needed for your development workflow.
+
+To build using Gradle, from the Airbyte repository root, run:
+```
+./gradlew :airbyte-integrations:connectors:source-fleetio:build
+```
+
+#### Create credentials
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.com/integrations/sources/fleetio)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_fleetio/spec.yaml` file.
+Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
+See `integration_tests/sample_config.json` for a sample config file.
+
+**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source fleetio test creds`
+and place them into `secrets/config.json`.
+
+### Locally running the connector docker image
+
+#### Build
+First, make sure you build the latest Docker image:
+```
+docker build . -t airbyte/source-fleetio:dev
+```
+
+You can also build the connector image via Gradle:
+```
+./gradlew :airbyte-integrations:connectors:source-fleetio:airbyteDocker
+```
+When building via Gradle, the docker image name and tag, respectively, are the values of the `io.airbyte.name` and `io.airbyte.version` `LABEL`s in
+the Dockerfile.
+
+#### Run
+Then run any of the connector commands as follows:
+```
+docker run --rm airbyte/source-fleetio:dev spec
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-fleetio:dev check --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-fleetio:dev discover --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-fleetio:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
+```
+## Testing
+
+#### Acceptance Tests
+Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
+
+To run your integration tests with Docker, run:
+```
+./acceptance-test-docker.sh
+```
+
+### Using gradle to run tests
+All commands should be run from airbyte project root.
+To run unit tests:
+```
+./gradlew :airbyte-integrations:connectors:source-fleetio:unitTest
+```
+To run acceptance and custom integration tests:
+```
+./gradlew :airbyte-integrations:connectors:source-fleetio:integrationTest
+```
+
+## Dependency Management
+All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
+We split dependencies between two groups, dependencies that are:
+* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
+* required for the testing need to go to `TEST_REQUIREMENTS` list
+
+### Publishing a new version of the connector
+You've checked out the repo, implemented a million dollar feature, and you're ready to share your changes with the world. Now what?
+1. Make sure your changes are passing unit and integration tests.
+1. Bump the connector version in `Dockerfile` -- just increment the value of the `LABEL io.airbyte.version` appropriately (we use [SemVer](https://semver.org/)).
+1. Create a Pull Request.
+1. Pat yourself on the back for being an awesome contributor.
+1. Someone from Airbyte will take a look at your PR and iterate with you to merge it into master.

airbyte-integrations/connectors/source-fleetio/__init__.py

@@ -0,0 +1,3 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#

airbyte-integrations/connectors/source-fleetio/acceptance-test-config.yml

@@ -0,0 +1,25 @@
+# See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference)
+# for more information about how to configure these tests
+connector_image: airbyte/source-fleetio:dev
+acceptance_tests:
+  spec:
+    tests:
+      - spec_path: "source_fleetio/spec.yaml"
+  connection:
+    tests:
+      - config_path: "secrets/config.json"
+        status: "succeed"
+      - config_path: "integration_tests/invalid_config.json"
+        status: "failed"
+  discovery:
+    tests:
+      - config_path: "secrets/config.json"
+  basic_read:
+    tests:
+      - config_path: "secrets/config.json"
+        configured_catalog_path: "integration_tests/configured_catalog.json"
+        empty_streams: []
+  full_refresh:
+    tests:
+      - config_path: "secrets/config.json"
+        configured_catalog_path: "integration_tests/configured_catalog.json"

airbyte-integrations/connectors/source-fleetio/acceptance-test-docker.sh

@@ -0,0 +1,3 @@
+#!/usr/bin/env sh
+
+source "$(git rev-parse --show-toplevel)/airbyte-integrations/bases/connector-acceptance-test/acceptance-test-docker.sh"

airbyte-integrations/connectors/source-fleetio/build.gradle

@@ -0,0 +1,9 @@
+plugins {
+    id 'airbyte-python'
+    id 'airbyte-docker'
+    id 'airbyte-connector-acceptance-test'
+}
+
+airbytePython {
+    moduleDirectory 'source_fleetio'
+}

airbyte-integrations/connectors/source-fleetio/integration_tests/__init__.py

@@ -0,0 +1,3 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#

airbyte-integrations/connectors/source-fleetio/integration_tests/abnormal_state.json

@@ -0,0 +1,32 @@
+{
+  "issues": {
+    "id": ""
+  },
+  "service_entries": {
+    "id": ""
+  },
+  "submitted_inspection_forms": {
+    "id": ""
+  },
+  "vehicles": {
+    "id": ""
+  },
+  "contacts": {
+    "id": ""
+  },
+  "expense_entries": {
+    "id": ""
+  },
+  "fuel_entries": {
+    "id": ""
+  },
+  "parts": {
+    "id": ""
+  },
+  "purchase_orders": {
+    "id": ""
+  },
+  "vehicle_assignments": {
+    "id": ""
+  }
+}

airbyte-integrations/connectors/source-fleetio/integration_tests/acceptance.py

@@ -0,0 +1,16 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#
+
+
+import pytest
+
+pytest_plugins = ("connector_acceptance_test.plugin",)
+
+
+@pytest.fixture(scope="session", autouse=True)
+def connector_setup():
+    """This fixture is a placeholder for external resources that acceptance test might require."""
+    # TODO: setup test dependencies if needed. otherwise remove the TODO comments
+    yield
+    # TODO: clean up test dependencies

airbyte-integrations/connectors/source-fleetio/integration_tests/configured_catalog.json

@@ -0,0 +1,94 @@
+{
+  "streams": [
+    {
+      "stream": {
+        "name": "issues",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    },
+    {
+      "stream": {
+        "name": "service_entries",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    },
+    {
+      "stream": {
+        "name": "submitted_inspection_forms",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    },
+    {
+      "stream": {
+        "name": "vehicles",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    },
+    {
+      "stream": {
+        "name": "contacts",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    },
+    {
+      "stream": {
+        "name": "expense_entries",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    },
+    {
+      "stream": {
+        "name": "fuel_entries",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    },
+    {
+      "stream": {
+        "name": "parts",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    },
+    {
+      "stream": {
+        "name": "purchase_orders",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    },
+    {
+      "stream": {
+        "name": "vehicle_assignments",
+        "json_schema": {},
+        "supported_sync_modes": ["full_refresh"]
+      },
+      "sync_mode": "full_refresh",
+      "destination_sync_mode": "append"
+    }
+  ]
+}

airbyte-integrations/connectors/source-fleetio/integration_tests/invalid_config.json

@@ -0,0 +1,4 @@
+{
+  "api_token": "",
+  "account_token": ""
+}

airbyte-integrations/connectors/source-fleetio/integration_tests/sample_config.json

@@ -0,0 +1,4 @@
+{
+  "api_token": "xxx",
+  "account_token": "xxx"
+}

airbyte-integrations/connectors/source-fleetio/integration_tests/sample_state.json

@@ -0,0 +1 @@
+{}

airbyte-integrations/connectors/source-fleetio/main.py

@@ -0,0 +1,13 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#
+
+
+import sys
+
+from airbyte_cdk.entrypoint import launch
+from source_fleetio import SourceFleetio
+
+if __name__ == "__main__":
+    source = SourceFleetio()
+    launch(source, sys.argv[1:])

airbyte-integrations/connectors/source-fleetio/metadata.yaml

@@ -0,0 +1,21 @@
+data:
+  registries:
+    cloud:
+      enabled: true
+    oss:
+      enabled: true
+  connectorSubtype: api
+  connectorType: source
+  definitionId: 13a7652d-1d94-4033-931a-613d22d3cbb3
+  dockerImageTag: 0.1.0
+  dockerRepository: airbyte/source-fleetio
+  githubIssueLabel: source-fleetio
+  icon: fleetio.svg
+  license: MIT
+  name: Fleetio
+  releaseDate: "2024-02-12"
+  releaseStage: alpha
+  documentationUrl: https://docs.airbyte.com/integrations/sources/fleetio
+  tags:
+    - language:lowcode
+metadataSpecVersion: "1.0"

airbyte-integrations/connectors/source-fleetio/requirements.txt

@@ -0,0 +1,2 @@
+-e ../../bases/connector-acceptance-test
+-e .