Dymension EVM Rollapp

Rollapp-evm - A template EVM RollApp chain

This repository hosts rollapp-evm, a template implementation of a dymension rollapp with EVM execution layer.

rollapp-evm is an example of a working RollApp using dymension-RDK and dymint.

It uses Cosmos-SDK's simapp as a reference, but with the following changes:

• minimal app setup
• wired with EVM and ERC20 modules by Evmos
• wired IBC for ICS 20 Fungible Token Transfers
• Uses dymint for block sequencing and replacing tendermint
• Uses modules from dymension-RDK to sync with dymint and provide RollApp custom logic

Overview

Note: Requires Go 1.22.1. Requires Dasel and JQ.

Installing / Getting started

Build and install the rollapp-evm binary:

export BECH32_PREFIX=ethm
make install BECH32_PREFIX=$BECH32_PREFIX
export EXECUTABLE="rollapp-evm"

Initial configuration

export the following variables:

export CELESTIA_NETWORK="mock" # for a testnet RollApp use "mocha", for mainnet - "celestia"
export CELESTIA_HOME_DIR="${HOME}/.da"

export ROLLAPP_CHAIN_ID="rollappevm_1234-1"
export KEY_NAME_ROLLAPP="rol-user"
export BASE_DENOM="arax"
export DENOM=$(echo "$BASE_DENOM" | sed 's/^.//')
export MONIKER="$ROLLAPP_CHAIN_ID-sequencer"
export ROLLAPP_HOME_DIR="$HOME/.rollapp_evm"
export ROLLAPP_SETTLEMENT_INIT_DIR_PATH="${ROLLAPP_HOME_DIR}/init"
export SKIP_EVM_BASE_FEE=true # optional, disables rollapp fees

$EXECUTABLE config keyring-backend test

# (if running hub too)
export SETTLEMENT_LAYER="mock" # when running a local hub or a public network use "dymension"
export HUB_KEY_WITH_FUNDS="hub-user"
export HUB_RPC_ENDPOINT="localhost"
export HUB_RPC_PORT="36657" # default: 36657
export HUB_RPC_URL="http://${HUB_RPC_ENDPOINT}:${HUB_RPC_PORT}"
export HUB_REST_URL="http://localhost:1318" # required for relayer
export HUB_CHAIN_ID="dymension_100-1"

dymd config chain-id "${HUB_CHAIN_ID}"
dymd config node "${HUB_RPC_URL}"
dymd config keyring-backend test

And initialize the rollapp:

sh scripts/init.sh

Run rollapp

$EXECUTABLE start

You should have a running local rollapp!

Run a settlement node too

Run local dymension hub node

Follow the instructions on Dymension Hub docs to run local dymension hub node

all scripts are adjusted to use local hub node that's hosted on the default port localhost:36657.

configuration with a remote hub node is also supported. Configure env vars above appropriately (RPC_URL)

Create sequencer keys

create sequencer key using dymd

dymd keys add sequencer --keyring-dir ~/.rollapp_evm/sequencer_keys --keyring-backend test
SEQUENCER_ADDR=`dymd keys show sequencer --address --keyring-backend test --keyring-dir ~/.rollapp_evm/sequencer_keys`

fund the sequencer account (if you're using a remote hub node, you must fund the sequencer account or you must have an account with enough funds in your keyring)

# retrieve the minimal bond amount from hub sequencer params
# you have to account for gas fees so it should the final value should be increased
BOND_AMOUNT="$(dymd q rollapp params -o json | jq -r '.params.min_sequencer_bond_global.amount')$(dymd q rollapp params -o json | jq -r '.params.min_sequencer_bond_global.denom')"

# Extract the numeric part
NUMERIC_PART=$(echo $BOND_AMOUNT | sed 's/adym//')

# Add 100000000000000000000 for fees
NEW_NUMERIC_PART=$(echo "$NUMERIC_PART + 100000000000000000000" | bc)

# Append 'adym' back
TRANSFER_AMOUNT="${NEW_NUMERIC_PART}adym"

dymd tx bank send $HUB_KEY_WITH_FUNDS $SEQUENCER_ADDR ${TRANSFER_AMOUNT} --keyring-backend test --broadcast-mode sync --fees 1dym -y --node ${HUB_RPC_URL}

Register rollapp on settlement

export HUB_PERMISSIONED_KEY="hub-user"

sh scripts/settlement/register_rollapp_to_hub.sh

Register sequencer for rollapp on settlement

sh scripts/settlement/register_sequencer_to_hub.sh

Configure the rollapp

Modify dymint.toml in the chain directory (~/.rollapp_evm/config)

dasel put -f "${ROLLAPP_HOME_DIR}"/config/dymint.toml "settlement_layer" -v "dymension"
dasel put -f "${ROLLAPP_HOME_DIR}"/config/dymint.toml "node_address" -v "$HUB_RPC_URL"
dasel put -f "${ROLLAPP_HOME_DIR}"/config/dymint.toml "rollapp_id" -v "$ROLLAPP_CHAIN_ID"
dasel put -f "${ROLLAPP_HOME_DIR}"/config/dymint.toml "max_idle_time" -v "2s" # may want to change to something longer after setup (see below)
dasel put -f "${ROLLAPP_HOME_DIR}"/config/dymint.toml "max_proof_time" -v "1s"
dasel put -f "${ROLLAPP_HOME_DIR}"/config/app.toml "minimum-gas-prices" -v "1arax"
dasel put -f "${ROLLAPP_HOME_DIR}"/config/dymint.toml "batch_submit_time" -v "30s"

$EXECUTABLE validate-genesis

# this script automatically adds 2 vesting accounts, adjust the timestamps to your liking or skip this step
sh scripts/add_vesting_accounts_to_genesis_file.sh

Run rollapp locally

$EXECUTABLE start --log_level=debug

Set Sequencer reward address (optional)

# Add a new key for the reward address
$EXECUTABLE keys add reward
REWARD=$($EXECUTABLE keys show reward -a)

# This assumes mock default sequencer consensus key location. for different location, update the path.
KEY="${ROLLAPP_HOME_DIR}/config/priv_validator_key.json"

# set the kerying backend to test
$EXECUTABLE config keyring-backend test

# Import the consensus key into the rollapp keyring
$EXECUTABLE tx sequencer unsafe-import-cons-key sequencerConsensusKey $KEY

# Update the sequencer reward address
$EXECUTABLE tx sequencer create-sequencer sequencerConsensusKey --from $KEY_NAME_ROLLAPP --fees 20000000000000$BASE_DENOM --reward-addr $REWARD --keyring-backend test -y

Setup IBC between rollapp and local dymension hub node

Install dymension relayer

git clone https://github.com/dymensionxyz/go-relayer.git --branch v0.3.4-v2.5.2-relayer-canon-6
cd go-relayer && make install

Establish IBC channel

Verify you have all the environment variables defined earlier set. while the rollapp and the local dymension hub node running, run:

sh scripts/ibc/setup_ibc.sh

After successful run, the new established channels will be shown

Configure empty block time to 1hr

Stop the rollapp:

kill $(pgrep $EXECUTABLE)

Linux:

dasel put -f "${ROLLAPP_HOME_DIR}"/config/dymint.toml "max_idle_time" -v "1h"

Start the rollapp:

$EXECUTABLE start

run the relayer

rly start hub-rollapp

Developers guide

For support, join our Discord community and find us in the Developer section.

Setup push hooks

To setup push hooks, run the following command:

./scripts/setup_push_hooks.sh