merge latest code #2
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
* Update sensors.conf for 7050QX-32 and 7050QX-32S These two platforms were using a previous version of a kernel driver. The new one names the i2c buses differently. We therefore need to rename them here. * Fix the default minigraph for the 7050QX-32S The interface offset is invalid which makes sonic-cfggen generate an invalid config_db.jon in rc.local. This config then silently makes orchagent/syncd fail. * Use the partition on which sonic-aboot.swi is Instead of always assuming /mnt/flash, use the partition where the image to be installed lies. This allow for the image to be on any partition.
Fixes in bufferorchs ready_lists
* Add function pointers for extended get stats API Signed-off-by: Guohan Lu <[email protected]>
This commit updates the shared headroom value for z9100 T0 and T1 profile based on the ratio. The ratio is derived from the 40G broadcom recommended XL Sheet. Unit tested the above configuration by dumping the registers for the shared headroom. The shared headroom values in registers reflects the correct new values for both T1 and T0. Signed-off-by: Harish Venkatraman <[email protected]>
Signed-off-by: Andriy Moroz <[email protected]>
Signed-off-by: Volodymyr Samotiy <[email protected]>
* sonic-quagga update. Don't spam with 'Vtysh connected from' message * Restart counters in 60 seconds after manual swss restart
Signed-off-by: Ying Xie <[email protected]>
Signed-off-by: Guohan Lu <[email protected]>
Signed-off-by: Qi Luo <[email protected]>
* [swss]: sonic-swss submodule update Signed-off-by: Guohan Lu <[email protected]> * [broadcom]: update sai.mk Signed-off-by: Guohan Lu <[email protected]>
Signed-off-by: Guohan Lu <[email protected]>
Signed-off-by: Sihui Han <[email protected]>
* Wait initializing led_proc for 60 seconds. bcm sdk need time to be ready accept a connection
* Run arp_update just once, don't restart it. It will run continuosly with 5 min pauses
* Upgrade SAI to v1.2.4 * Add a new supported device accton as7116 * Add maintainer info for deb * Add mk file for accton 7116 * fix some bug for sai 1.2.4 * fix git commit error for sdk and sai * change sai and sdk deb name * add config file for qos support * initial commit * Delete qos.json * Delete buffers.json.j2 * Delete qos.json * Delete buffers.json.j2 * Delete buffers.json.j2 * Delete qos.json * add support for sai 1.3.0
…1793) * Use MAC from EEPROM for PortChannels Signed-off-by: Andriy Moroz <[email protected]> * Use MAC from EEPROM in DEVICE_METADATA Will affect MAC for VLAN interfaces Signed-off-by: Andriy Moroz <[email protected]> * Get MAC via decode-syseeprom Signed-off-by: Andriy Moroz <[email protected]> * hw-management is now a service Signed-off-by: Andriy Moroz <[email protected]> * Add error handling for MAC fetch process Signed-off-by: Andriy Moroz <[email protected]>
* Revert "Revert "[vs-test]: not forward routes with no-export community (#1774)" (#1828)" This reverts commit 6459275. * [no-export]: move no export test under bgp folder Signed-off-by: Sihui Han <[email protected]> * [no-export]: increase wait time to avoid random failure Signed-off-by: Sihui Han <[email protected]>
…1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He <[email protected]> * Add bfn.service for init barefoot. Signed-off-by: Wade He <[email protected]> * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He <[email protected]> * Add bfn script in /etc/init.d/ Signed-off-by: Wade He <[email protected]> * Add bfn service in debian Signed-off-by: Wade He <[email protected]> * Fixed CPLD switch LED behavior. Signed-off-by: Wade He <[email protected]> * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He <[email protected]> * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He <[email protected]> * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He <[email protected]> * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He <[email protected]> * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang <[email protected]> * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He <[email protected]> * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He <[email protected]> * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He <[email protected]> * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb8. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 5591321. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23)
* [make] introducing new build option KERNEL_BUILD_METHOD - Kernel could be built from source files with method 'build' - Kernel could be downloaded from Azure storage with method 'download' Signed-off-by: Ying Xie <[email protected]> * Replace BUILD with PROCURE * fix typo
* sonic-quagga update. Don't spam with 'Vtysh connected from' message * Enable counters inside swss container. systemd is not flexible enough to follow our business rules
Signed-off-by: Sihui Han <[email protected]>
* update sfputil, port indext start from 1 * DX010 update SKUs port config index Port index in port_config.ini now start from 1. * Seastone-DX010-10-50 port config update * Seastone-DX010-50 port config update * Seastone-DX010 port config update * Update dx010 sfputil plugin * Implement lpmode set function. * Implement transceiver reset function. * Python code style format. * Remove new line at the end of port_config.ini *New line cause parsing error in sfputilbase. * Add get_transceiver_change_event method *This needed by new sfputilbase implement. * Fix unintended line breaks
Signed-off-by: Volodymyr Samotiy <[email protected]>
* [makefile] Rename Makefile to Makefile.work Signed-off-by: Ying Xie <[email protected]> * [makefile] Add new make file to avoid extra step * avoiding calling "make stretch" Signed-off-by: Ying Xie <[email protected]> * [makefile] allow skipping "make stretch" Signed-off-by: Ying Xie <[email protected]> * [makefile] add all PHONY targets to pass through list Signed-off-by: Ying Xie <[email protected]>
…nsistent view among CONFIG_DB get commands (#1941) for ecn on/off operations, which are conducted at per queue all interfaces granularity. TODO: Ideally, we should have ECN/WRED profile applied at per interface per queue granularity, and we should do it for all hwskus under the device directory, not just 7050. Signed-off-by: Wenda Ni <[email protected]>
led start bcm cmd triggers link state notifications. This is quick fix to avoid such fake link state notifications. Signed-off-by: Guohan Lu <[email protected]>
…#1937) * mlnx enhancement for xcvrd implementation * fix conflict
* [baseimage]: install picocom 3.1 in base image Signed-off-by: Guohan Lu <[email protected]> * add picocom to stretch build Signed-off-by: Guohan Lu <[email protected]> * fix slave.mk bug Signed-off-by: Guohan Lu <[email protected]>
* [sai]: upgrade SAI to version 1.3.3 Signed-off-by: Guohan Lu <[email protected]> * update mellanox sai
…o longer build from source (#1946)
Signed-off-by: Volodymyr Samotiy <[email protected]>
- Future versions of SAI packages will stop carrying these files. Signed-off-by: Ying Xie <[email protected]>
…ase (#1908) - Move front panel ports and port channels MTU and IP configurations out of the current /etc/network/interfaces file and store them in the configuration database. - The default MTU value for both front panel ports and the port channels is 9100. They are set via the minigraph or 9100 by default. - Introduce portmgrd which will pick up the MTU configurations from the configuration database. - The updated intfmgrd will pick up IP address changes from the configuration database. - Update sonic-swss submodule Signed-off-by: Shu0T1an ChenG <[email protected]>
Signed-off-by: Shu0T1an ChenG <[email protected]>
* [kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u2) Signed-off-by: Qi Luo <[email protected]> * Update submodule Signed-off-by: Qi Luo <[email protected]>
Signed-off-by: Qi Luo <[email protected]>
Signed-off-by: Shu0T1an ChenG <[email protected]>
On overlay filesystem the name of the mountpoint will also match in the mount command for overlayfs as upperdir= To prevent detecting the wrong partition we now look for space before. This ensure that we match mountpoint and not devices in df and mount outputs.
* [vs-test]: support python docker 3.5.0 Signed-off-by: Guohan Lu <[email protected]>
Signed-off-by: Volodymyr Samotiy <[email protected]>
move the swss service start/stop logic into /usr/local/bin/swss.sh Signed-off-by: Guohan Lu <[email protected]>
Signed-off-by: Wenda <[email protected]>
Call add_extra_package instead add_derived_package. Because the 'extra' package doesn't require 'base' package to be installed to be built. This change enables make stretch with multiple threads. Signed-off-by: Ying Xie <[email protected]>
depmod -a will be executed automatically after the package get installed Signed-off-by: Shu0T1an ChenG <[email protected]>
…figuration (#1975) * Add psuutil and sfputil support * Fixed fancontrol issue * Add sensor's label * Update haliburton platform modules
sonic-utilities requires six Signed-off-by: Shu0T1an ChenG <[email protected]>
cpchangtw
pushed a commit
that referenced
this pull request
May 24, 2023
#### Why I did it Update sonic-host-services submodule to include below commits: ``` bc8698d Merge pull request sonic-net#21 from abdosi/feature 557a110 Fix the issue where if dest port is not specified in ACL rule than for multi-asic where we create NAT rule to forward traffic from Namespace to host fail with exception. 6e45acc (master) Merge pull request sonic-net#14 from abdosi/feature 4d6cad7 Merge remote-tracking branch 'upstream/master' into feature bceb13e Install libyang to azure pipeline (sonic-net#20) 82299f5 Merge pull request sonic-net#13 from SuvarnaMeenakshi/cacl_fabricns 15d3bf4 Merge branch 'master' into cacl_fabricns de54082 Merge pull request sonic-net#16 from ZhaohuiS/feature/caclmgrd_external_client_warning_log b4b368d Add warning log if destination port is not defined d4bb96d Merge branch 'master' into cacl_fabricns 35c76cb Add unit-test and fix typo. 17d44c2 Made Changes to be Python 3.7 compatible 978afb5 Aligning Code 1fbf8fb Merge remote-tracking branch 'upstream/master' into feature 7b8c7d1 Added UT for the changes 91c4c42 Merge pull request sonic-net#9 from ZhaohuiS/feature/caclmgrd_external_client 7c0b56a Add 4 test cases for external_client_acl, including single port and port range for ipv4 and ipv6 b71e507 Merge remote-tracking branch 'origin/master' into HEAD d992dc0 Merge branch 'master' into feature/caclmgrd_external_client bd7b172 DST_PORT is configuralbe in json config file for EXTERNAL_CLIENT_ACL f9af7ae [CLI] Move hostname, mgmt interface/vrf config to hostcfgd (#2) 70ce6a3 Merge pull request sonic-net#10 from sujinmkang/cold_reset 29be8d2 Added Support to render Feature Table using Device running metadata. Also added support to render 'has_asic_scope' field of Feature Table. 3437e35 [caclmgrd][chassis]: Add ip tables rules to accept internal docker traffic from fabric asic namespaces. 8720561 Fix and add hardware reboot cause determination tests 0dcc7fe remove the empty bracket if no hardware reboot cause minor e47d831 fix the wrong expected result comparision ef86b53 Fix startswith Attribute error 8a630bb fix mock patch 8543ddf update the reboot cause logic and update the unit test 53ad7cd fix the mock patch function 7c8003d fix the reboot-cause regix for test 1ba611f fix typo 25379d3 Add unit test case a56133b Add hardware reboot cause as actual reboot cause for soft reboot failed c7d3833 Support Restapi/gnmi control plane acls f6ea036 caclmgrd: Don't block traffic to mgmt by default a712fc4 Update test cases adc058b caclmgrd: Don't block traffic to mgmt by default 06ff918 Merge pull request sonic-net#7 from bluecmd/patch-1 e3e23bc ci: Rename sonic-buildimage repository e83a858 Merge pull request #4 from kamelnetworks/acl-ip2me-test f5a2e50 [caclmgrd]: Tests for IP2ME rules generation ```
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
- What I did
- How I did it
- How to verify it
- Description for the changelog
- A picture of a cute animal (not mandatory but encouraged)