docs: Use breakout breakout sample image for dreame FEL instructions

Hypfer · Nov 23, 2024 · 14cde41 · 14cde41
1 parent c19f9c2
commit 14cde41
Show file tree

Hide file tree

Showing 3 changed files with 1 addition and 1 deletion.
diff --git a/docs/_pages/installation/dreame.md b/docs/_pages/installation/dreame.md
@@ -302,7 +302,7 @@ Follow these steps to enter fastboot:
 Plug the Breakout PCB into your robot. Make sure that the USB OTG ID Jumper is **NOT** set and plug a cable into
 the Micro USB port.
 
-<img src="./img/dreame_breakout_fel.jpg" alt="Dreame Breakout PCB connected" width="1200" height="700">
+<img src="./img/dreame_breakout_breakout_fel.jpg" alt="Dreame Breakout PCB connected" width="1200" height="700">
 
 1. Press and hold the button on the PCB.
 2. Then, press and hold the power button of the robot. Keep pressing the button on the PCB.

diff --git a/docs/_pages/installation/img/dreame_breakout_breakout_fel.jpg b/docs/_pages/installation/img/dreame_breakout_breakout_fel.jpg
diff --git a/docs/_pages/installation/img/dreame_breakout_fel.jpg b/docs/_pages/installation/img/dreame_breakout_fel.jpg