Skip to content

unlshd-034
Compare
Choose a tag to compare
@xMasterX xMasterX released this 09 Mar 02:37
· 3215 commits to dev since this release
unlshd-034
05489fd
This commit was signed with the committer’s verified signature.
xMasterX MMX
GPG key ID: 7CCC66B7DBDD1C83
Learn about vigilant mode.

New changes

  • If you have copied apps into apps folder - remove apps folder on your microSD before installing this release to avoid issues!

  • SubGHz: Default custom buttons layout for non standard remotes (for example your remote has broken buttons and transmit only 0xC, now you can use other buttons)

  • SubGHz: Fix issues with external module 5v power (now all works automatically, enabling +5v manually not required) (Only for modules that work with 5v->3.3v converter!!!!!)

  • SubGHz: Option to disable automatic 5v power for external modules - (5v is enabled by default, if you are using module without converter you can set this option to OFF)

  • SubGHz: Fix and update subghz protocols to use new error system

  • SubGHz: Fix default frequency being overwritten bug (Add manually fixes)

  • SubGHz: Fix 464Mhz and (390MHz for external module only) was showing up in Frequency analyzer all the time due to noise

  • iButton: Fix ibutton app - add manually - duplicate names

  • Plugins: NFC Magic fix - reinit nfc at app start

  • Plugins: Update Unitemp - Temperature sensors reader (DHT11/22, DS18B20, BMP280, HTU21x and more) (by quen0n)

  • Plugins: Update SWD Probe (by g3gg0)

  • Plugins: Massive plugins refactoring - not full refactoring, only small issues is fixed and moved all plugins to furi mutex instead of valuemutex

  • Plugins: Many small issues was found and fixed due mutex upgrade

  • Plugins: Extra pack updated and fixed (valuemutex to furi_mutex upgrade)

  • Plugins: SubGHz playlist - rewind (skip or play previous file) (by alvarotorijano)

  • Plugins: Properly rename unirf remix to subghz remote - And automatically migrate user files to new folder (unirf -> subghz_remote)

  • Plugins: Fix unirf freeze (protocol deserialize status ok) (by @Willy-JL | PR #375)

  • Plugins: Blackjack game: fix bug counting more than one ace (by @403-Fruit | PR #374)

  • Plugins: Update POCSAG Pager app to new error system

  • Plugins: Update iButton Fuzzer to new iButton system

  • Infrared: Update universal remote assets (by @amec0e | PR #378)

  • OFW: PicoPass: auth cleanup

  • OFW: More UI fixes and improvements

  • OFW: NFC: Support reading Mifare Classic key B from sector trailer, reading sector with B key where A key can't read block, Nfc Magic app not using NFC folder by default (in file select)

  • OFW: Remove ValueMutex -> Breaking API change, api was changed from 17.x to 18.x

  • OFW: Support reseting iCx cards

  • OFW: Fixed picopass load save file overrun

  • OFW: Fix SD card CID parsing

  • OFW: Archive browser: update path on dir leave

  • OFW: SubGhz: better and more verbose error handling in protocols, stricter CAME validation -> Breaking API change, api was changed from 16.x to 17.x

  • OFW: iButton system and app refactoring (+new protocols) -> Breaking API change, api was changed from 15.x to 16.x
    (this will make your manually copied plugins not work, update them in same way you installed them, or delete apps folder and then install firmware, if you using extra pack builds (with e in version) all apps in _Extra will be updated automatically)

  • OFW: New pin reset splashscreen

  • OFW: Getter for application data path

🎲 Download latest extra apps pack

-> How to install firmware

-> Download qFlipper (official link)

Please support development of the project

  • Boosty: https://boosty.to/mmxdev
  • Ko-Fi: https://ko-fi.com/masterx
  • cloudtips (only RU payments accepted): https://pay.cloudtips.ru/p/7b3e9d65
  • YooMoney (only RU payments accepted): https://yoomoney.ru/fundraise/XA49mgQLPA0.221209
  • USDT(TRC20): TSXcitMSnWXUFqiUfEXrTVpVewXy2cYhrs
  • BCH: qquxfyzntuqufy2dx0hrfr4sndp0tucvky4sw8qyu3
  • ETH/BSC/ERC20-Tokens: darkflippers.eth (or 0xFebF1bBc8229418FF2408C07AF6Afa49152fEc6a)
  • BTC: bc1q0np836jk9jwr4dd7p6qv66d04vamtqkxrecck9
  • DOGE: D6R6gYgBn5LwTNmPyvAQR6bZ9EtGgFCpvv
  • LTC: ltc1q3ex4ejkl0xpx3znwrmth4lyuadr5qgv8tmq8z9
  • XMR (Monero): 41xUz92suUu1u5Mu4qkrcs52gtfpu9rnZRdBpCJ244KRHf6xXSvVFevdf2cnjS7RAeYr5hn9MsEfxKoFDRSctFjG5fv1Mhn
  • TON: EQCOqcnYkvzOZUV_9bPE_8oTbOrOF03MnF-VcJyjisTZmpGf

Thanks to our sponsors:

callmezimbra, Quen0n, MERRON, grvpvl (lvpvrg), art_col, ThurstonWaffles, Moneron, UterGrooll, LUCFER, Northpirate, zloepuzo, T.Rat, Alexey B., ionelife, ...
and all other great people who supported our project and me (xMasterX), thanks to you all!

Note: To avoid issues with .dfu, prefer installing using .tgz with qFlipper, web updater or by self update package, all needed assets will be installed

Recommended option - Web Updater

What means n or e in - flipper-z-f7-update-unlshd-034(n / e).tgz ? - n means this build comes without our custom animations, only official flipper animations,
e means build has extra apps pack preinstalled

Self-update package (update from microSD) - flipper-z-f7-update-unlshd-034.zip or download .tgz for mobile app / qFlipper

Install via Web Updater

Version without custom animations - Install via Web Updater

Version with extra apps - Install via Web Updater

Contributors

403-Fruit, Willy-JL, and amec0e
Assets 12
Loading