Site-to-site VPNs help privately connect your on-premises environments with your cloud environments on DigitalOcean. They also facilitate secure inter-VPC communication, known as VPC peering. This guide demonstrates how to establish a site-to-site IPsec VPN with StrongSwan using a Droplet as a VPN gateway.
Imagine running workloads in two DigitalOcean data centers in different regions that need to communicate privately. These workloads run on backend Droplets, which we will connect over a VPN tunnel running between a pair of gateway Droplets, as illustrated in the diagram below.
A few notes about this architecture:
- It doesn't have to be StrongSwan on both sides of the VPN tunnel; any IPsec software/hardware gateway will do.
- It doesn't have to be DigitalOcean on both sides of the VPN tunnel; any other cloud provider or on-premises data center will work.
- It doesn't have to be just two sites; you can have multiple sites and establish a partial or full connection mesh.
This particular implementation uses IKEv2 and pre-shared keys. It also employs an always-on VPN tunnel, but feel free to use an on-demand tunnel with auto=route if it suits your needs better.
strongswan-ams3 Droplet configuration (Ubuntu 22.04)
apt install strongswan -y
apt install net-tools -y
nano /etc/ipsec.conf
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
authby=secret
keyexchange=ikev2
mobike=no
conn net-net
leftid=@ams3
leftfirewall=yes
left=167.99.46.201
leftsubnet=10.110.0.0/20
right=64.225.7.37
rightsubnet=10.108.0.0/20
rightid=@nyc3
auto=start
type=tunnel
dpdaction=restart
nano /etc/ipsec.secrets
@ams3 @nyc3 : PSK 'cm9ja2VyYm66ZXIK'
sudo ufw disable
sysctl -w net.ipv4.ip_forward=1
ipsec rereadsecrets
ipsec reload
ipsec status
strongswan-nyc3 Droplet configuration (Ubuntu 22.04)
apt install strongswan -y
apt install net-tools -y
nano /etc/ipsec.conf
conn %default
ikelifetime=60m
keylife=20m
rekeymargin=3m
keyingtries=1
authby=secret
keyexchange=ikev2
mobike=no
conn net-net
leftid=@nyc3
leftfirewall=yes
left=64.225.7.37
leftsubnet=10.108.0.0/20
right=167.99.46.201
rightsubnet=10.110.0.0/20
rightid=@ams3
auto=start
type=tunnel
dpdaction=restart
nano /etc/ipsec.secrets
@nyc3 @ams3 : PSK 'cm9ja2VyYm66ZXIK'
sudo ufw disable
sysctl -w net.ipv4.ip_forward=1
ipsec rereadsecrets
ipsec reload
ipsec status
backend-ams3 Droplet configuration (Ubuntu 22.04)
apt install net-tools -y
ip route add 10.108.0.0/20 via 10.110.0.7 dev eth1
backend-nyc3 Droplet configuration (Ubuntu 22.04)
apt install net-tools -y
ip route add 10.110.0.0/20 via 10.108.0.2 dev eth1
To verify this setup, we will use Python to run an HTTP server on the backend-nyc3 Droplet.
python3 -m http.server 8000
We will then access this HTTP server from backend-ams3 via a private network.
curl http://10.108.0.3:8000
This is the response you should expect to get.
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>Directory listing for /</title>
</head>
<body>
<h1>Directory listing for /</h1>
<hr>
<ul>
<li><a href=".bashrc">.bashrc</a></li>
<li><a href=".cache/">.cache/</a></li>
<li><a href=".cloud-locale-test.skip">.cloud-locale-test.skip</a></li>
<li><a href=".profile">.profile</a></li>
<li><a href=".ssh/">.ssh/</a></li>
<li><a href=".wget-hsts">.wget-hsts</a></li>
<li><a href="snap/">snap/</a></li>
</ul>
<hr>
</body>
</html>Vasily Prokopov, Solutions Engineer at DigitalOcean – [email protected].
If you wish to learn more about DigitalOcean's services, you are welcome to reach out to the sales team at [email protected]. A global team of talented engineers will be happy to provide assistance.