Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Adding the Libsrp library for VSCSI Target driver #3

Merged
merged 1 commit into from
Mar 14, 2016
Merged

Adding the Libsrp library for VSCSI Target driver #3

merged 1 commit into from
Mar 14, 2016

Conversation

bgly
Copy link

@bgly bgly commented Mar 14, 2016

This is the initial push of the libsrp files that are required
for the ibmvscsis target driver.

This is the initial push of the libsrp files that are required
for the ibmvscsis target driver.
bgly pushed a commit that referenced this pull request Mar 14, 2016
Adding the Libsrp library for VSCSI Target driver
@bgly bgly merged commit cda28ca into master Mar 14, 2016
@bgly bgly deleted the libsrp branch March 14, 2016 21:31
@bgly bgly restored the libsrp branch March 15, 2016 00:31
@bgly bgly deleted the libsrp branch March 15, 2016 00:35
bgly pushed a commit that referenced this pull request Jun 21, 2016
commit 3d5fe03 upstream.

We can end up allocating a new compression stream with GFP_KERNEL from
within the IO path, which may result is nested (recursive) IO
operations.  That can introduce problems if the IO path in question is a
reclaimer, holding some locks that will deadlock nested IOs.

Allocate streams and working memory using GFP_NOIO flag, forbidding
recursive IO and FS operations.

An example:

  inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage.
  git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes:
   (jbd2_handle){+.+.?.}, at:  start_this_handle+0x4ca/0x555
  {IN-RECLAIM_FS-W} state was registered at:
     __lock_acquire+0x8da/0x117b
     lock_acquire+0x10c/0x1a7
     start_this_handle+0x52d/0x555
     jbd2__journal_start+0xb4/0x237
     __ext4_journal_start_sb+0x108/0x17e
     ext4_dirty_inode+0x32/0x61
     __mark_inode_dirty+0x16b/0x60c
     iput+0x11e/0x274
     __dentry_kill+0x148/0x1b8
     shrink_dentry_list+0x274/0x44a
     prune_dcache_sb+0x4a/0x55
     super_cache_scan+0xfc/0x176
     shrink_slab.part.14.constprop.25+0x2a2/0x4d3
     shrink_zone+0x74/0x140
     kswapd+0x6b7/0x930
     kthread+0x107/0x10f
     ret_from_fork+0x3f/0x70
  irq event stamp: 138297
  hardirqs last  enabled at (138297):  debug_check_no_locks_freed+0x113/0x12f
  hardirqs last disabled at (138296):  debug_check_no_locks_freed+0x33/0x12f
  softirqs last  enabled at (137818):  __do_softirq+0x2d3/0x3e9
  softirqs last disabled at (137813):  irq_exit+0x41/0x95

               other info that might help us debug this:
   Possible unsafe locking scenario:
         CPU0
         ----
    lock(jbd2_handle);
    <Interrupt>
      lock(jbd2_handle);

                *** DEADLOCK ***
  5 locks held by git/20158:
   #0:  (sb_writers#7){.+.+.+}, at: [<ffffffff81155411>] mnt_want_write+0x24/0x4b
   #1:  (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [<ffffffff81145087>] lock_rename+0xd9/0xe3
   #2:  (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [<ffffffff8114f8e2>] lock_two_nondirectories+0x3f/0x6b
   #3:  (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [<ffffffff8114f909>] lock_two_nondirectories+0x66/0x6b
   #4:  (jbd2_handle){+.+.?.}, at: [<ffffffff811e31db>] start_this_handle+0x4ca/0x555

               stack backtrace:
  CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty torvalds#211
  Call Trace:
    dump_stack+0x4c/0x6e
    mark_lock+0x384/0x56d
    mark_held_locks+0x5f/0x76
    lockdep_trace_alloc+0xb2/0xb5
    kmem_cache_alloc_trace+0x32/0x1e2
    zcomp_strm_alloc+0x25/0x73 [zram]
    zcomp_strm_multi_find+0xe7/0x173 [zram]
    zcomp_strm_find+0xc/0xe [zram]
    zram_bvec_rw+0x2ca/0x7e0 [zram]
    zram_make_request+0x1fa/0x301 [zram]
    generic_make_request+0x9c/0xdb
    submit_bio+0xf7/0x120
    ext4_io_submit+0x2e/0x43
    ext4_bio_write_page+0x1b7/0x300
    mpage_submit_page+0x60/0x77
    mpage_map_and_submit_buffers+0x10f/0x21d
    ext4_writepages+0xc8c/0xe1b
    do_writepages+0x23/0x2c
    __filemap_fdatawrite_range+0x84/0x8b
    filemap_flush+0x1c/0x1e
    ext4_alloc_da_blocks+0xb8/0x117
    ext4_rename+0x132/0x6dc
    ? mark_held_locks+0x5f/0x76
    ext4_rename2+0x29/0x2b
    vfs_rename+0x540/0x636
    SyS_renameat2+0x359/0x44d
    SyS_rename+0x1e/0x20
    entry_SYSCALL_64_fastpath+0x12/0x6f

[[email protected]: add stable mark]
Signed-off-by: Sergey Senozhatsky <[email protected]>
Acked-by: Minchan Kim <[email protected]>
Cc: Kyeongdon Kim <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
bgly pushed a commit that referenced this pull request Jun 21, 2016
commit ec183d2 upstream.

Fixes segmentation fault using, for instance:

  (gdb) run record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
  Starting program: /home/acme/bin/perf record -I -e intel_pt/tsc=1,noretcomp=1/u /bin/ls
  Missing separate debuginfos, use: dnf debuginfo-install glibc-2.22-7.fc23.x86_64
  [Thread debugging using libthread_db enabled]
  Using host libthread_db library "/lib64/libthread_db.so.1".

 Program received signal SIGSEGV, Segmentation fault.
  0 x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
  (gdb) bt
  #0  0x00000000004b9ea5 in tracepoint_error (e=0x0, err=13, sys=0x19b1370 "sched", name=0x19a5d00 "sched_switch") at util/parse-events.c:410
  #1  0x00000000004b9fc5 in add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:433
  #2  0x00000000004ba334 in add_tracepoint_event (list=0x19a5d20, idx=0x7fffffffb8c0, sys_name=0x19b1370 "sched", evt_name=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:498
  #3  0x00000000004bb699 in parse_events_add_tracepoint (list=0x19a5d20, idx=0x7fffffffb8c0, sys=0x19b1370 "sched", event=0x19a5d00 "sched_switch", err=0x0, head_config=0x0)
      at util/parse-events.c:936
  #4  0x00000000004f6eda in parse_events_parse (_data=0x7fffffffb8b0, scanner=0x19a49d0) at util/parse-events.y:391
  #5  0x00000000004bc8e5 in parse_events__scanner (str=0x663ff2 "sched:sched_switch", data=0x7fffffffb8b0, start_token=258) at util/parse-events.c:1361
  #6  0x00000000004bca57 in parse_events (evlist=0x19a5220, str=0x663ff2 "sched:sched_switch", err=0x0) at util/parse-events.c:1401
  #7  0x0000000000518d5f in perf_evlist__can_select_event (evlist=0x19a3b90, str=0x663ff2 "sched:sched_switch") at util/record.c:253
  #8  0x0000000000553c42 in intel_pt_track_switches (evlist=0x19a3b90) at arch/x86/util/intel-pt.c:364
  #9  0x00000000005549d1 in intel_pt_recording_options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at arch/x86/util/intel-pt.c:664
  #10 0x000000000051e076 in auxtrace_record__options (itr=0x19a2c40, evlist=0x19a3b90, opts=0x8edf68 <record+232>) at util/auxtrace.c:539
  #11 0x0000000000433368 in cmd_record (argc=1, argv=0x7fffffffde60, prefix=0x0) at builtin-record.c:1264
  #12 0x000000000049bec2 in run_builtin (p=0x8fa2a8 <commands+168>, argc=5, argv=0x7fffffffde60) at perf.c:390
  #13 0x000000000049c12a in handle_internal_command (argc=5, argv=0x7fffffffde60) at perf.c:451
  #14 0x000000000049c278 in run_argv (argcp=0x7fffffffdcbc, argv=0x7fffffffdcb0) at perf.c:495
  #15 0x000000000049c60a in main (argc=5, argv=0x7fffffffde60) at perf.c:618
(gdb)

Intel PT attempts to find the sched:sched_switch tracepoint but that seg
faults if tracefs is not readable, because the error reporting structure
is null, as errors are not reported when automatically adding
tracepoints.  Fix by checking before using.

Committer note:

This doesn't take place in a kernel that supports
perf_event_attr.context_switch, that is the default way that will be
used for tracking context switches, only in older kernels, like 4.2, in
a machine with Intel PT (e.g. Broadwell) for non-priviledged users.

Further info from a similar patch by Wang:

The error is in tracepoint_error: it assumes the 'e' parameter is valid.

However, there are many situation a parse_event() can be called without
parse_events_error. See result of

  $ grep 'parse_events(.*NULL)' ./tools/perf/ -r'

Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Tong Zhang <[email protected]>
Cc: Wang Nan <[email protected]>
Fixes: 1965817 ("perf tools: Enhance parsing events tracepoint error output")
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
bgly pushed a commit that referenced this pull request Jun 21, 2016
commit 361cad3 upstream.

We've seen this in a packet capture - I've intermixed what I
think was going on. The fix here is to grab the so_lock sooner.

1964379 -> #1 open (for write) reply seqid=1
1964393 -> #2 open (for read) reply seqid=2

  __nfs4_close(), state->n_wronly--
  nfs4_state_set_mode_locked(), changes state->state = [R]
  state->flags is [RW]
  state->state is [R], state->n_wronly == 0, state->n_rdonly == 1

1964398 -> #3 open (for write) call -> because close is already running
1964399 -> downgrade (to read) call seqid=2 (close of #1)
1964402 -> #3 open (for write) reply seqid=3

 __update_open_stateid()
   nfs_set_open_stateid_locked(), changes state->flags
   state->flags is [RW]
   state->state is [R], state->n_wronly == 0, state->n_rdonly == 1
   new sequence number is exposed now via nfs4_stateid_copy()

   next step would be update_open_stateflags(), pending so_lock

1964403 -> downgrade reply seqid=2, fails with OLD_STATEID (close of #1)

   nfs4_close_prepare() gets so_lock and recalcs flags -> send close

1964405 -> downgrade (to read) call seqid=3 (close of #1 retry)

   __update_open_stateid() gets so_lock
 * update_open_stateflags() updates state->n_wronly.
   nfs4_state_set_mode_locked() updates state->state

   state->flags is [RW]
   state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1

 * should have suppressed the preceding nfs4_close_prepare() from
   sending open_downgrade

1964406 -> write call
1964408 -> downgrade (to read) reply seqid=4 (close of #1 retry)

   nfs_clear_open_stateid_locked()
   state->flags is [R]
   state->state is [RW], state->n_wronly == 1, state->n_rdonly == 1

1964409 -> write reply (fails, openmode)

Signed-off-by: Andrew Elble <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
bgly pushed a commit that referenced this pull request Jun 21, 2016
[ Upstream commit 7716682 ]

Ilya reported following lockdep splat:

kernel: =========================
kernel: [ BUG: held lock freed! ]
kernel: 4.5.0-rc1-ceph-00026-g5e0a311 #1 Not tainted
kernel: -------------------------
kernel: swapper/5/0 is freeing memory
ffff880035c9d200-ffff880035c9dbff, with a lock still held there!
kernel: (&(&queue->rskq_lock)->rlock){+.-...}, at:
[<ffffffff816f6a88>] inet_csk_reqsk_queue_add+0x28/0xa0
kernel: 4 locks held by swapper/5/0:
kernel: #0:  (rcu_read_lock){......}, at: [<ffffffff8169ef6b>]
netif_receive_skb_internal+0x4b/0x1f0
kernel: #1:  (rcu_read_lock){......}, at: [<ffffffff816e977f>]
ip_local_deliver_finish+0x3f/0x380
kernel: #2:  (slock-AF_INET){+.-...}, at: [<ffffffff81685ffb>]
sk_clone_lock+0x19b/0x440
kernel: #3:  (&(&queue->rskq_lock)->rlock){+.-...}, at:
[<ffffffff816f6a88>] inet_csk_reqsk_queue_add+0x28/0xa0

To properly fix this issue, inet_csk_reqsk_queue_add() needs
to return to its callers if the child as been queued
into accept queue.

We also need to make sure listener is still there before
calling sk->sk_data_ready(), by holding a reference on it,
since the reference carried by the child can disappear as
soon as the child is put on accept queue.

Reported-by: Ilya Dryomov <[email protected]>
Fixes: ebb516a ("tcp/dccp: fix race at listener dismantle phase")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
bgly pushed a commit that referenced this pull request Jun 21, 2016
commit 09dc9cd upstream.

The code produces the following trace:

[1750924.419007] general protection fault: 0000 [#3] SMP
[1750924.420364] Modules linked in: nfnetlink autofs4 rpcsec_gss_krb5 nfsv4
dcdbas rfcomm bnep bluetooth nfsd auth_rpcgss nfs_acl dm_multipath nfs lockd
scsi_dh sunrpc fscache radeon ttm drm_kms_helper drm serio_raw parport_pc
ppdev i2c_algo_bit lpc_ich ipmi_si ib_mthca ib_qib dca lp parport ib_ipoib
mac_hid ib_cm i3000_edac ib_sa ib_uverbs edac_core ib_umad ib_mad ib_core
ib_addr tg3 ptp dm_mirror dm_region_hash dm_log psmouse pps_core
[1750924.420364] CPU: 1 PID: 8401 Comm: python Tainted: G D
3.13.0-39-generic torvalds#66-Ubuntu
[1750924.420364] Hardware name: Dell Computer Corporation PowerEdge
860/0XM089, BIOS A04 07/24/2007
[1750924.420364] task: ffff8800366a9800 ti: ffff88007af1c000 task.ti:
ffff88007af1c000
[1750924.420364] RIP: 0010:[<ffffffffa0131d51>] [<ffffffffa0131d51>]
qib_mcast_qp_free+0x11/0x50 [ib_qib]
[1750924.420364] RSP: 0018:ffff88007af1dd70  EFLAGS: 00010246
[1750924.420364] RAX: 0000000000000001 RBX: ffff88007b822688 RCX:
000000000000000f
[1750924.420364] RDX: ffff88007b822688 RSI: ffff8800366c15a0 RDI:
6764697200000000
[1750924.420364] RBP: ffff88007af1dd78 R08: 0000000000000001 R09:
0000000000000000
[1750924.420364] R10: 0000000000000011 R11: 0000000000000246 R12:
ffff88007baa1d98
[1750924.420364] R13: ffff88003ecab000 R14: ffff88007b822660 R15:
0000000000000000
[1750924.420364] FS:  00007ffff7fd8740(0000) GS:ffff88007fc80000(0000)
knlGS:0000000000000000
[1750924.420364] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1750924.420364] CR2: 00007ffff597c750 CR3: 000000006860b000 CR4:
00000000000007e0
[1750924.420364] Stack:
[1750924.420364]  ffff88007b822688 ffff88007af1ddf0 ffffffffa0132429
000000007af1de20
[1750924.420364]  ffff88007baa1dc8 ffff88007baa0000 ffff88007af1de70
ffffffffa00cb313
[1750924.420364]  00007fffffffde88 0000000000000000 0000000000000008
ffff88003ecab000
[1750924.420364] Call Trace:
[1750924.420364]  [<ffffffffa0132429>] qib_multicast_detach+0x1e9/0x350
[ib_qib]
[1750924.568035]  [<ffffffffa00cb313>] ? ib_uverbs_modify_qp+0x323/0x3d0
[ib_uverbs]
[1750924.568035]  [<ffffffffa0092d61>] ib_detach_mcast+0x31/0x50 [ib_core]
[1750924.568035]  [<ffffffffa00cc213>] ib_uverbs_detach_mcast+0x93/0x170
[ib_uverbs]
[1750924.568035]  [<ffffffffa00c61f6>] ib_uverbs_write+0xc6/0x2c0 [ib_uverbs]
[1750924.568035]  [<ffffffff81312e68>] ? apparmor_file_permission+0x18/0x20
[1750924.568035]  [<ffffffff812d4cd3>] ? security_file_permission+0x23/0xa0
[1750924.568035]  [<ffffffff811bd214>] vfs_write+0xb4/0x1f0
[1750924.568035]  [<ffffffff811bdc49>] SyS_write+0x49/0xa0
[1750924.568035]  [<ffffffff8172f7ed>] system_call_fastpath+0x1a/0x1f
[1750924.568035] Code: 66 2e 0f 1f 84 00 00 00 00 00 31 c0 5d c3 66 2e 0f 1f
84 00 00 00 00 00 66 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb 48 8b 7f 10
<f0> ff 8f 40 01 00 00 74 0e 48 89 df e8 8e f8 06 e1 5b 5d c3 0f
[1750924.568035] RIP  [<ffffffffa0131d51>] qib_mcast_qp_free+0x11/0x50
[ib_qib]
[1750924.568035]  RSP <ffff88007af1dd70>
[1750924.650439] ---[ end trace 73d5d4b3f8ad4851 ]

The fix is to note the qib_mcast_qp that was found.   If none is found, then
return EINVAL indicating the error.

Reviewed-by: Dennis Dalessandro <[email protected]>
Reported-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Mike Marciniszyn <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
bgly pushed a commit that referenced this pull request Jun 21, 2016
commit d144dfe upstream.

If we use USB ID pin as wakeup source, and there is a USB block
device on this USB OTG (ID) cable, the system will be deadlock
after system resume.

The root cause for this problem is: the workqueue ci_otg may try
to remove hcd before the driver resume has finished, and hcd will
disconnect the device on it, then, it will call device_release_driver,
and holds the device lock "dev->mutex", but it is never unlocked since
it waits workqueue writeback to run to flush the block information, but
the workqueue writeback is freezable, it is not thawed before driver
resume has finished.

When the driver (device: sd 0:0:0:0:) resume goes to dpm_complete, it
tries to get its device lock "dev->mutex", but it can't get it forever,
then the deadlock occurs. Below call stacks show the situation.

So, in order to fix this problem, we need to change workqueue ci_otg
as freezable, then the work item in this workqueue will be run after
driver's resume, this workqueue will not be blocked forever like above
case since the workqueue writeback has been thawed too.

Tested at: i.mx6qdl-sabresd and i.mx6sx-sdb.

[  555.178869] kworker/u2:13   D c07de74c     0   826      2 0x00000000
[  555.185310] Workqueue: ci_otg ci_otg_work
[  555.189353] Backtrace:
[  555.191849] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0)
[  555.198912]  r10:ee471ba0 r9:00000000 r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4
[  555.206867]  r4:ee470000
[  555.209453] [<c07dec24>] (schedule) from [<c07e2fc4>] (schedule_timeout+0x15c/0x1e0)
[  555.217212]  r4:7fffffff r3:edc2b000
[  555.220862] [<c07e2e68>] (schedule_timeout) from [<c07df6c8>] (wait_for_common+0x94/0x144)
[  555.229140]  r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4 r4:7fffffff
[  555.235980] [<c07df634>] (wait_for_common) from [<c07df790>] (wait_for_completion+0x18/0x1c)
[  555.244430]  r10:00000001 r9:c0b5563c r8:c0042e48 r7:ef086000 r6:eea4372c r5:ef131b00
[  555.252383]  r4:00000000
[  555.254970] [<c07df778>] (wait_for_completion) from [<c0043cb8>] (flush_work+0x19c/0x234)
[  555.263177] [<c0043b1c>] (flush_work) from [<c0043fac>] (flush_delayed_work+0x48/0x4c)
[  555.271106]  r8:ed5b5000 r7:c0b38a3c r6:eea439cc r5:eea4372c r4:eea4372c
[  555.277958] [<c0043f64>] (flush_delayed_work) from [<c00eae18>] (bdi_unregister+0x84/0xec)
[  555.286236]  r4:eea43520 r3:20000153
[  555.289885] [<c00ead94>] (bdi_unregister) from [<c02c2154>] (blk_cleanup_queue+0x180/0x29c)
[  555.298250]  r5:eea43808 r4:eea43400
[  555.301909] [<c02c1fd4>] (blk_cleanup_queue) from [<c0417914>] (__scsi_remove_device+0x48/0xb8)
[  555.310623]  r7:00000000 r6:20000153 r5:ededa950 r4:ededa800
[  555.316403] [<c04178cc>] (__scsi_remove_device) from [<c0415e90>] (scsi_forget_host+0x64/0x68)
[  555.325028]  r5:ededa800 r4:ed5b5000
[  555.328689] [<c0415e2c>] (scsi_forget_host) from [<c0409828>] (scsi_remove_host+0x78/0x104)
[  555.337054]  r5:ed5b5068 r4:ed5b5000
[  555.340709] [<c04097b0>] (scsi_remove_host) from [<c04cdfcc>] (usb_stor_disconnect+0x50/0xb4)
[  555.349247]  r6:ed5b56e4 r5:ed5b5818 r4:ed5b5690 r3:00000008
[  555.355025] [<c04cdf7c>] (usb_stor_disconnect) from [<c04b3bc8>] (usb_unbind_interface+0x78/0x25c)
[  555.363997]  r8:c13919b4 r7:edd3c000 r6:edd3c020 r5:ee551c68 r4:ee551c00 r3:c04cdf7c
[  555.371892] [<c04b3b50>] (usb_unbind_interface) from [<c03dc248>] (__device_release_driver+0x8c/0x118)
[  555.381213]  r10:00000001 r9:edd90c00 r8:c13919b4 r7:ee551c68 r6:c0b546e0 r5:c0b5563c
[  555.389167]  r4:edd3c020
[  555.391752] [<c03dc1bc>] (__device_release_driver) from [<c03dc2fc>] (device_release_driver+0x28/0x34)
[  555.401071]  r5:edd3c020 r4:edd3c054
[  555.404721] [<c03dc2d4>] (device_release_driver) from [<c03db304>] (bus_remove_device+0xe0/0x110)
[  555.413607]  r5:edd3c020 r4:ef17f04c
[  555.417253] [<c03db224>] (bus_remove_device) from [<c03d8128>] (device_del+0x114/0x21c)
[  555.425270]  r6:edd3c028 r5:edd3c020 r4:ee551c00 r3:00000000
[  555.431045] [<c03d8014>] (device_del) from [<c04b1560>] (usb_disable_device+0xa4/0x1e8)
[  555.439061]  r8:edd3c000 r7:eded8000 r6:00000000 r5:00000001 r4:ee551c00
[  555.445906] [<c04b14bc>] (usb_disable_device) from [<c04a8e54>] (usb_disconnect+0x74/0x224)
[  555.454271]  r9:edd90c00 r8:ee551000 r7:ee551c68 r6:ee551c9c r5:ee551c00 r4:00000001
[  555.462156] [<c04a8de0>] (usb_disconnect) from [<c04a8fb8>] (usb_disconnect+0x1d8/0x224)
[  555.470259]  r10:00000001 r9:edd90000 r8:ee471e2c r7:ee551468 r6:ee55149c r5:ee551400
[  555.478213]  r4:00000001
[  555.480797] [<c04a8de0>] (usb_disconnect) from [<c04ae5ec>] (usb_remove_hcd+0xa0/0x1ac)
[  555.488813]  r10:00000001 r9:ee471eb0 r8:00000000 r7:ef3d9500 r6:eded810c r5:eded80b0
[  555.496765]  r4:eded8000
[  555.499351] [<c04ae54c>] (usb_remove_hcd) from [<c04d4158>] (host_stop+0x28/0x64)
[  555.506847]  r6:eeb50010 r5:eded8000 r4:eeb51010
[  555.511563] [<c04d4130>] (host_stop) from [<c04d09b8>] (ci_otg_work+0xc4/0x124)
[  555.518885]  r6:00000001 r5:eeb50010 r4:eeb502a0 r3:c04d4130
[  555.524665] [<c04d08f4>] (ci_otg_work) from [<c00454f0>] (process_one_work+0x194/0x420)
[  555.532682]  r6:ef086000 r5:eeb502a0 r4:edc44480
[  555.537393] [<c004535c>] (process_one_work) from [<c00457b0>] (worker_thread+0x34/0x514)
[  555.545496]  r10:edc44480 r9:ef086000 r8:c0b1a100 r7:ef086034 r6:00000088 r5:edc44498
[  555.553450]  r4:ef086000
[  555.556032] [<c004577c>] (worker_thread) from [<c004bab4>] (kthread+0xdc/0xf8)
[  555.563268]  r10:00000000 r9:00000000 r8:00000000 r7:c004577c r6:edc44480 r5:eddc15c0
[  555.571221]  r4:00000000
[  555.573804] [<c004b9d8>] (kthread) from [<c000fef0>] (ret_from_fork+0x14/0x24)
[  555.581040]  r7:00000000 r6:00000000 r5:c004b9d8 r4:eddc15c0

[  553.429383] sh              D c07de74c     0   694    691 0x00000000
[  553.435801] Backtrace:
[  553.438295] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0)
[  553.445358]  r10:edd3c054 r9:edd3c078 r8:edddbd50 r7:edcbbc00 r6:c1377c34 r5:60000153
[  553.453313]  r4:eddda000
[  553.455896] [<c07dec24>] (schedule) from [<c07deff8>] (schedule_preempt_disabled+0x10/0x14)
[  553.464261]  r4:edd3c058 r3:0000000a
[  553.467910] [<c07defe8>] (schedule_preempt_disabled) from [<c07e0bbc>] (mutex_lock_nested+0x1a0/0x3e8)
[  553.477254] [<c07e0a1c>] (mutex_lock_nested) from [<c03e927c>] (dpm_complete+0xc0/0x1b0)
[  553.485358]  r10:00561408 r9:edd3c054 r8:c0b4863c r7:edddbd90 r6:c0b485d8 r5:edd3c020
[  553.493313]  r4:edd3c0d0
[  553.495896] [<c03e91bc>] (dpm_complete) from [<c03e9388>] (dpm_resume_end+0x1c/0x20)
[  553.503652]  r9:00000000 r8:c0b1a9d0 r7:c1334ec0 r6:c1334edc r5:00000003 r4:00000010
[  553.511544] [<c03e936c>] (dpm_resume_end) from [<c0079894>] (suspend_devices_and_enter+0x158/0x504)
[  553.520604]  r4:00000000 r3:c1334efc
[  553.524250] [<c007973c>] (suspend_devices_and_enter) from [<c0079e74>] (pm_suspend+0x234/0x2cc)
[  553.532961]  r10:00561408 r9:ed6b7300 r8:00000004 r7:c1334eec r6:00000000 r5:c1334ee8
[  553.540914]  r4:00000003
[  553.543493] [<c0079c40>] (pm_suspend) from [<c0078a6c>] (state_store+0x6c/0xc0)

[  555.703684] 7 locks held by kworker/u2:13/826:
[  555.708140]  #0:  ("%s""ci_otg"){++++.+}, at: [<c0045484>] process_one_work+0x128/0x420
[  555.716277]  #1:  ((&ci->work)){+.+.+.}, at: [<c0045484>] process_one_work+0x128/0x420
[  555.724317]  #2:  (usb_bus_list_lock){+.+.+.}, at: [<c04ae5e4>] usb_remove_hcd+0x98/0x1ac
[  555.732626]  #3:  (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224
[  555.740403]  #4:  (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224
[  555.748179]  #5:  (&dev->mutex){......}, at: [<c03dc2f4>] device_release_driver+0x20/0x34
[  555.756487]  #6:  (&shost->scan_mutex){+.+.+.}, at: [<c04097d0>] scsi_remove_host+0x20/0x104

Cc: Jun Li <[email protected]>
Signed-off-by: Peter Chen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
bgly pushed a commit that referenced this pull request Jun 21, 2016
…pt()

commit 7834c10 upstream.

Since 4.4, I've been able to trigger this occasionally:

===============================
[ INFO: suspicious RCU usage. ]
4.5.0-rc7-think+ #3 Not tainted
Cc: Andi Kleen <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

-------------------------------
./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 1
RCU used illegally from extended quiescent state!
no locks held by swapper/3/0.

stack backtrace:
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.5.0-rc7-think+ #3
 ffffffff92f821e0 1f3e5c340597d7fc ffff880468e07f10 ffffffff92560c2a
 ffff880462145280 0000000000000001 ffff880468e07f40 ffffffff921376a6
 ffffffff93665ea0 0000cc7c876d28da 0000000000000005 ffffffff9383dd60
Call Trace:
 <IRQ>  [<ffffffff92560c2a>] dump_stack+0x67/0x9d
 [<ffffffff921376a6>] lockdep_rcu_suspicious+0xe6/0x100
 [<ffffffff925ae7a7>] do_trace_write_msr+0x127/0x1a0
 [<ffffffff92061c83>] native_apic_msr_eoi_write+0x23/0x30
 [<ffffffff92054408>] smp_trace_call_function_interrupt+0x38/0x360
 [<ffffffff92d1ca60>] trace_call_function_interrupt+0x90/0xa0
 <EOI>  [<ffffffff92ac5124>] ? cpuidle_enter_state+0x1b4/0x520

Move the entering_irq() call before ack_APIC_irq(), because entering_irq()
tells the RCU susbstems to end the extended quiescent state, so that the
following trace call in ack_APIC_irq() works correctly.

Suggested-by: Andi Kleen <[email protected]>
Fixes: 4787c36 "x86/tracing: Add irq_enter/exit() in smp_trace_reschedule_interrupt()"
Signed-off-by: Dave Jones <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
bgly pushed a commit that referenced this pull request Jun 21, 2016
commit 9b29972 upstream.

Fix null pointer dereference by changing register_cache() to return an int
instead of being void.  This allows it to return -ENOMEM or -ENODEV and
enables upper layers to handle the OOM case without NULL pointer issues.

See this thread:
  http://thread.gmane.org/gmane.linux.kernel.bcache.devel/3521

Fixes this error:
  gargamel:/sys/block/md5/bcache# echo /dev/sdh2 > /sys/fs/bcache/register

  bcache: register_cache() error opening sdh2: cannot allocate memory
  BUG: unable to handle kernel NULL pointer dereference at 00000000000009b8
  IP: [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache]
  PGD 120dff067 PUD 1119a3067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in: veth ip6table_filter ip6_tables
  (...)
  CPU: 4 PID: 3371 Comm: kworker/4:3 Not tainted 4.4.2-amd64-i915-volpreempt-20160213bc1 #3
  Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013
  Workqueue: events cache_set_flush [bcache]
  task: ffff88020d5dc280 ti: ffff88020b6f8000 task.ti: ffff88020b6f8000
  RIP: 0010:[<ffffffffc05a7e8d>]  [<ffffffffc05a7e8d>] cache_set_flush+0x102/0x15c [bcache]

Signed-off-by: Eric Wheeler <[email protected]>
Tested-by: Marc MERLIN <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
bgly pushed a commit that referenced this pull request Jun 21, 2016
…ing"

commit 93f0750 upstream.

This patch causes a Kernel panic when called on a DVB driver.

This was also reported by David R <[email protected]>:

May  7 14:47:35 server kernel: [  501.247123] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
May  7 14:47:35 server kernel: [  501.247239] IP: [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.247354] PGD cae6f067 PUD ca99c067 PMD 0
May  7 14:47:35 server kernel: [  501.247426] Oops: 0000 [#1] SMP
May  7 14:47:35 server kernel: [  501.247482] Modules linked in: xfs tun xt_connmark xt_TCPMSS xt_tcpmss xt_owner xt_REDIRECT nf_nat_redirect xt_nat ipt_MASQUERADE nf_nat_masquerade_ipv4 ts_kmp ts_bm xt_string ipt_REJECT nf_reject_ipv4 xt_recent xt_conntrack xt_multiport xt_pkttype xt_tcpudp xt_mark nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_filter ip_tables ip6table_filter ip6_tables x_tables pppoe pppox dm_crypt ts2020 regmap_i2c ds3000 cx88_dvb dvb_pll cx88_vp3054_i2c mt352 videobuf2_dvb cx8800 cx8802 cx88xx pl2303 tveeprom videobuf2_dma_sg ppdev videobuf2_memops videobuf2_v4l2 videobuf2_core dvb_usb_digitv snd_hda_codec_via snd_hda_codec_hdmi snd_hda_codec_generic radeon dvb_usb snd_hda_intel amd64_edac_mod serio_raw snd_hda_codec edac_core fbcon k10temp bitblit softcursor snd_hda_core font snd_pcm_oss i2c_piix4 snd_mixer_oss tileblit drm_kms_helper syscopyarea snd_pcm snd_seq_dummy sysfillrect snd_seq_oss sysimgblt fb_sys_fops ttm snd_seq_midi r8169 snd_rawmidi drm snd_seq_midi_event e1000e snd_seq snd_seq_device snd_timer snd ptp pps_core i2c_algo_bit soundcore parport_pc ohci_pci shpchp tpm_tis tpm nfsd auth_rpcgss oid_registry hwmon_vid exportfs nfs_acl mii nfs bonding lockd grace lp sunrpc parport
May  7 14:47:35 server kernel: [  501.249564] CPU: 1 PID: 6889 Comm: vb2-cx88[0] Not tainted 4.5.3 #3
May  7 14:47:35 server kernel: [  501.249644] Hardware name: System manufacturer System Product Name/M4A785TD-V EVO, BIOS 0211    07/08/2009
May  7 14:47:35 server kernel: [  501.249767] task: ffff8800aebf3600 ti: ffff8801e07a0000 task.ti: ffff8801e07a0000
May  7 14:47:35 server kernel: [  501.249861] RIP: 0010:[<ffffffffa0222c71>]  [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.250002] RSP: 0018:ffff8801e07a3de8  EFLAGS: 00010086
May  7 14:47:35 server kernel: [  501.250071] RAX: 0000000000000283 RBX: ffff880210dc5000 RCX: 0000000000000283
May  7 14:47:35 server kernel: [  501.250161] RDX: ffffffffa0222cf0 RSI: 0000000000000000 RDI: ffff880210dc5014
May  7 14:47:35 server kernel: [  501.250251] RBP: ffff8801e07a3df8 R08: ffff8801e07a0000 R09: 0000000000000000
May  7 14:47:35 server kernel: [  501.250348] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8800cda2a9d8
May  7 14:47:35 server kernel: [  501.250438] R13: ffff880210dc51b8 R14: 0000000000000000 R15: ffff8800cda2a828
May  7 14:47:35 server kernel: [  501.250528] FS:  00007f5b77fff700(0000) GS:ffff88021fc40000(0000) knlGS:00000000adaffb40
May  7 14:47:35 server kernel: [  501.250631] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
May  7 14:47:35 server kernel: [  501.250704] CR2: 0000000000000004 CR3: 00000000ca19d000 CR4: 00000000000006e0
May  7 14:47:35 server kernel: [  501.250794] Stack:
May  7 14:47:35 server kernel: [  501.250822]  ffff8801e07a3df8 ffffffffa0222cfd ffff8801e07a3e70 ffffffffa0236beb
May  7 14:47:35 server kernel: [  501.250937]  0000000000000283 ffff8801e07a3e94 0000000000000000 0000000000000000
May  7 14:47:35 server kernel: [  501.251051]  ffff8800aebf3600 ffffffff8108d8e0 ffff8801e07a3e38 ffff8801e07a3e38
May  7 14:47:35 server kernel: [  501.251165] Call Trace:
May  7 14:47:35 server kernel: [  501.251200]  [<ffffffffa0222cfd>] ? __verify_planes_array_core+0xd/0x10 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.251306]  [<ffffffffa0236beb>] vb2_core_dqbuf+0x2eb/0x4c0 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.251398]  [<ffffffff8108d8e0>] ? prepare_to_wait_event+0x100/0x100
May  7 14:47:35 server kernel: [  501.251482]  [<ffffffffa023855b>] vb2_thread+0x1cb/0x220 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.251569]  [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.251662]  [<ffffffffa0238390>] ? vb2_core_qbuf+0x230/0x230 [videobuf2_core]
May  7 14:47:35 server kernel: [  501.255982]  [<ffffffff8106f984>] kthread+0xc4/0xe0
May  7 14:47:35 server kernel: [  501.260292]  [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50
May  7 14:47:35 server kernel: [  501.264615]  [<ffffffff81697a5f>] ret_from_fork+0x3f/0x70
May  7 14:47:35 server kernel: [  501.268962]  [<ffffffff8106f8c0>] ? kthread_park+0x50/0x50
May  7 14:47:35 server kernel: [  501.273216] Code: 0d 01 74 16 48 8b 46 28 48 8b 56 30 48 89 87 d0 01 00 00 48 89 97 d8 01 00 00 5d c3 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 <8b> 46 04 48 89 e5 8d 50 f7 31 c0 83 fa 01 76 02 5d c3 48 83 7e
May  7 14:47:35 server kernel: [  501.282146] RIP  [<ffffffffa0222c71>] __verify_planes_array.isra.3+0x1/0x80 [videobuf2_v4l2]
May  7 14:47:35 server kernel: [  501.286391]  RSP <ffff8801e07a3de8>
May  7 14:47:35 server kernel: [  501.290619] CR2: 0000000000000004
May  7 14:47:35 server kernel: [  501.294786] ---[ end trace b2b354153ccad110 ]---

This reverts commit 2c1f695.

Cc: Sakari Ailus <[email protected]>
Cc: Hans Verkuil <[email protected]>
Fixes: 2c1f695 ("[media] videobuf2-v4l2: Verify planes array in buffer dequeueing")
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
bgly pushed a commit that referenced this pull request Jun 21, 2016
commit b49b927 upstream.

We shouldn't be calling clk_prepare_enable()/clk_prepare_disable()
in an atomic context.

Fixes the following issue:

[    5.830970] ehci-omap: OMAP-EHCI Host Controller driver
[    5.830974] driver_register 'ehci-omap'
[    5.895849] driver_register 'wl1271_sdio'
[    5.896870] BUG: scheduling while atomic: udevd/994/0x00000002
[    5.896876] 4 locks held by udevd/994:
[    5.896904]  #0:  (&dev->mutex){......}, at: [<c049597c>] __driver_attach+0x60/0xac
[    5.896923]  #1:  (&dev->mutex){......}, at: [<c049598c>] __driver_attach+0x70/0xac
[    5.896946]  #2:  (tll_lock){+.+...}, at: [<c04c2630>] omap_tll_enable+0x2c/0xd0
[    5.896966]  #3:  (prepare_lock){+.+...}, at: [<c05ce9c8>] clk_prepare_lock+0x48/0xe0
[    5.897042] Modules linked in: wlcore_sdio(+) ehci_omap(+) dwc3_omap snd_soc_ts3a225e leds_is31fl319x bq27xxx_battery_i2c tsc2007 bq27xxx_battery bq2429x_charger ina2xx tca8418_keypad as5013 leds_tca6507 twl6040_vibra gpio_twl6040 bmp085_i2c(+) palmas_gpadc usb3503 palmas_pwrbutton bmg160_i2c(+) bmp085 bma150(+) bmg160_core bmp280 input_polldev snd_soc_omap_mcbsp snd_soc_omap_mcpdm snd_soc_omap snd_pcm_dmaengine
[    5.897048] Preemption disabled at:[<  (null)>]   (null)
[    5.897051]
[    5.897059] CPU: 0 PID: 994 Comm: udevd Not tainted 4.6.0-rc5-letux+ torvalds#233
[    5.897062] Hardware name: Generic OMAP5 (Flattened Device Tree)
[    5.897076] [<c010e714>] (unwind_backtrace) from [<c010af34>] (show_stack+0x10/0x14)
[    5.897087] [<c010af34>] (show_stack) from [<c040aa7c>] (dump_stack+0x88/0xc0)
[    5.897099] [<c040aa7c>] (dump_stack) from [<c020c558>] (__schedule_bug+0xac/0xd0)
[    5.897111] [<c020c558>] (__schedule_bug) from [<c06f3d44>] (__schedule+0x88/0x7e4)
[    5.897120] [<c06f3d44>] (__schedule) from [<c06f46d8>] (schedule+0x9c/0xc0)
[    5.897129] [<c06f46d8>] (schedule) from [<c06f4904>] (schedule_preempt_disabled+0x14/0x20)
[    5.897140] [<c06f4904>] (schedule_preempt_disabled) from [<c06f64e4>] (mutex_lock_nested+0x258/0x43c)
[    5.897150] [<c06f64e4>] (mutex_lock_nested) from [<c05ce9c8>] (clk_prepare_lock+0x48/0xe0)
[    5.897160] [<c05ce9c8>] (clk_prepare_lock) from [<c05d0e7c>] (clk_prepare+0x10/0x28)
[    5.897169] [<c05d0e7c>] (clk_prepare) from [<c04c2668>] (omap_tll_enable+0x64/0xd0)
[    5.897180] [<c04c2668>] (omap_tll_enable) from [<c04c1728>] (usbhs_runtime_resume+0x18/0x17c)
[    5.897192] [<c04c1728>] (usbhs_runtime_resume) from [<c049d404>] (pm_generic_runtime_resume+0x2c/0x40)
[    5.897202] [<c049d404>] (pm_generic_runtime_resume) from [<c049f180>] (__rpm_callback+0x38/0x68)
[    5.897210] [<c049f180>] (__rpm_callback) from [<c049f220>] (rpm_callback+0x70/0x88)
[    5.897218] [<c049f220>] (rpm_callback) from [<c04a0a00>] (rpm_resume+0x4ec/0x7ec)
[    5.897227] [<c04a0a00>] (rpm_resume) from [<c04a0f48>] (__pm_runtime_resume+0x4c/0x64)
[    5.897236] [<c04a0f48>] (__pm_runtime_resume) from [<c04958dc>] (driver_probe_device+0x30/0x70)
[    5.897246] [<c04958dc>] (driver_probe_device) from [<c04959a4>] (__driver_attach+0x88/0xac)
[    5.897256] [<c04959a4>] (__driver_attach) from [<c04940f8>] (bus_for_each_dev+0x50/0x84)
[    5.897267] [<c04940f8>] (bus_for_each_dev) from [<c0494e40>] (bus_add_driver+0xcc/0x1e4)
[    5.897276] [<c0494e40>] (bus_add_driver) from [<c0496914>] (driver_register+0xac/0xf4)
[    5.897286] [<c0496914>] (driver_register) from [<c01018e0>] (do_one_initcall+0x100/0x1b8)
[    5.897296] [<c01018e0>] (do_one_initcall) from [<c01c7a54>] (do_init_module+0x58/0x1c0)
[    5.897304] [<c01c7a54>] (do_init_module) from [<c01c8a3c>] (SyS_finit_module+0x88/0x90)
[    5.897313] [<c01c8a3c>] (SyS_finit_module) from [<c0107120>] (ret_fast_syscall+0x0/0x1c)
[    5.912697] ------------[ cut here ]------------
[    5.912711] WARNING: CPU: 0 PID: 994 at kernel/sched/core.c:2996 _raw_spin_unlock+0x28/0x58
[    5.912717] DEBUG_LOCKS_WARN_ON(val > preempt_count())

Reported-by: H. Nikolaus Schaller <[email protected]>
Tested-by: H. Nikolaus Schaller <[email protected]>
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Lee Jones <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
bgly pushed a commit that referenced this pull request Aug 31, 2016
…offline_kmem()

BugLink: http://bugs.launchpad.net/bugs/1596575

commit 3a06bb7 upstream.

memcg_offline_kmem() may be called from memcg_free_kmem() after a css
init failure.  memcg_free_kmem() is a ->css_free callback which is
called without cgroup_mutex and memcg_offline_kmem() ends up using
css_for_each_descendant_pre() without any locking.  Fix it by adding rcu
read locking around it.

    mkdir: cannot create directory `65530': No space left on device
    ===============================
    [ INFO: suspicious RCU usage. ]
    4.6.0-work+ torvalds#321 Not tainted
    -------------------------------
    kernel/cgroup.c:4008 cgroup_mutex or RCU read lock required!
     [  527.243970] other info that might help us debug this:
     [  527.244715]
    rcu_scheduler_active = 1, debug_locks = 0
    2 locks held by kworker/0:5/1664:
     #0:  ("cgroup_destroy"){.+.+..}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0
     #1:  ((&css->destroy_work)#3){+.+...}, at: [<ffffffff81060ab5>] process_one_work+0x165/0x4a0
     [  527.248098] stack backtrace:
    CPU: 0 PID: 1664 Comm: kworker/0:5 Not tainted 4.6.0-work+ torvalds#321
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014
    Workqueue: cgroup_destroy css_free_work_fn
    Call Trace:
      dump_stack+0x68/0xa1
      lockdep_rcu_suspicious+0xd7/0x110
      css_next_descendant_pre+0x7d/0xb0
      memcg_offline_kmem.part.44+0x4a/0xc0
      mem_cgroup_css_free+0x1ec/0x200
      css_free_work_fn+0x49/0x5e0
      process_one_work+0x1c5/0x4a0
      worker_thread+0x49/0x490
      kthread+0xea/0x100
      ret_from_fork+0x1f/0x40

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Tejun Heo <[email protected]>
Acked-by: Vladimir Davydov <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Kamal Mostafa <[email protected]>
bgly pushed a commit that referenced this pull request Nov 30, 2016
TLDR; This changes the way that version strings are parsed in the packaging to
make it easier for me to maintain topic branches/PPA builds. There should
be no changes to how things work today for standard Ubuntu kernels. But,
it allows for topic-branch maintainers to add an optional ".X" in the ABI
name, for reasons described below.

<Regression Testing>
------------------
Old Parsing:
  = abinum =
  $ echo "33.58" | sed -e 's/\..*//'
  33
  = uploadnum =
  $ echo "33.58" | sed -e 's/.*\.//'
  58
  = abi =
  $ echo "33.58" | gawk -F. '{print $1}'
  33

New Parsing:
  = abinum =
  $ echo "33.58" | sed -r -e 's/([^\+]*)\.[^\.]+(\+.*)?$/\1/'
  33
  = uploadnum =
  $ echo "33.58" | sed -r -e 's/[^\+]*\.([^\.]+(\+.*)?$$)/\1/'
  58
  = abi =
  $ echo "33.58" | sed -r -e 's/([^\+]*)\.[^\.]+(\+.*)?$/\1/'
  33
</Regression Testing>

When maintaining topic customizations that track Ubuntu kernel releases, it
is nice have the following features:

 1) Ability to decipher the base Ubuntu kernel revision used from the topic
    kernel's revision number
 2) Use a version that dpkg sorts > the base Ubuntu version
 3) Use a version that dpkg sorts < the next expected Ubuntu version
 4) Ability to retains the same ABI as the base Ubuntu version when the
    ABI has indeed not changed. This helps with e.g. d-i compatibility.
 5) Make use of ABI tracking facilities (vs. just disabling them)

This is difficult to do with the current version scheme, which encodes the
ABI number in the version string:

  <upstream-version>-<abi>.<rev>

I can tack a "+topic.<N>" to the end of rev, we can solve 1-3, but only as
long as as the ABI is the same. Once the ABI changes, I don't have a good way
to bump it. If I increment the ABI, we'll overlap with the next Ubuntu ABI
(breaking #4). If we jump to a huge ABI number (e.g. x100 to go from 32 to
3200), we'll have a package revision that will never again upgrade to an Ubuntu
version (breaking #3), and never get back to the Ubuntu ABI (again breaking #4).
I can of course use a linux-meta package to e.g. transition from a 3200 ABI back
to a 32 ABI at the packaging level, but the bootloader will still consider
3200 to be newer and therefore the default.

I've therefore started using the following scheme:

  <upstream-version>-<abi>(.topicabi)?.<rev>(+<topic>.<topicrev>)?

Where topicabi must always be >= <rev> (ugly, but necessary).

If I don't break the ABI, I can then branch and return like so:

3.16.0-8.6 -------------------------------------------------> 3.16.0-8.7
   \                                                             ^
    \                                                            |
     \--> 3.16.0-8.6+topic.1 -------> 3.16.0-8.6+topic.2 --------/

If I do need to break the ABI, I can branch and return like so:

3.16.0-8.6 -------------------------------------------------> 3.16.0-9.1
   \                                                             ^
    \       ABI break #1                   ABI break #2          |
     \--> 3.16.0-8.6.6+topic.1 -------> 3.16.0-8.7.6+topic.2 ----/

Signed-off-by: dann frazier <[email protected]>
Signed-off-by: Tim Gardner <[email protected]>
bgly pushed a commit that referenced this pull request Nov 30, 2016
BugLink: http://bugs.launchpad.net/bugs/1637517

commit 420902c upstream.

If we hold the superblock lock while calling reiserfs_quota_on_mount(), we can
deadlock our own worker - mount blocks kworker/3:2, sleeps forever more.

crash> ps|grep UN
    715      2   3  ffff880220734d30  UN   0.0       0      0  [kworker/3:2]
   9369   9341   2  ffff88021ffb7560  UN   1.3  493404 123184  Xorg
   9665   9664   3  ffff880225b92ab0  UN   0.0   47368    812  udisks-daemon
  10635  10403   3  ffff880222f22c70  UN   0.0   14904    936  mount
crash> bt ffff880220734d30
PID: 715    TASK: ffff880220734d30  CPU: 3   COMMAND: "kworker/3:2"
 #0 [ffff8802244c3c20] schedule at ffffffff8144584b
 #1 [ffff8802244c3cc8] __rt_mutex_slowlock at ffffffff814472b3
 #2 [ffff8802244c3d28] rt_mutex_slowlock at ffffffff814473f5
 #3 [ffff8802244c3dc8] reiserfs_write_lock at ffffffffa05f28fd [reiserfs]
 #4 [ffff8802244c3de8] flush_async_commits at ffffffffa05ec91d [reiserfs]
 #5 [ffff8802244c3e08] process_one_work at ffffffff81073726
 #6 [ffff8802244c3e68] worker_thread at ffffffff81073eba
 #7 [ffff8802244c3ec8] kthread at ffffffff810782e0
 #8 [ffff8802244c3f48] kernel_thread_helper at ffffffff81450064
crash> rd ffff8802244c3cc8 10
ffff8802244c3cc8:  ffffffff814472b3 ffff880222f23250   .rD.....P2."....
ffff8802244c3cd8:  0000000000000000 0000000000000286   ................
ffff8802244c3ce8:  ffff8802244c3d30 ffff880220734d80   0=L$.....Ms ....
ffff8802244c3cf8:  ffff880222e8f628 0000000000000000   (.."............
ffff8802244c3d08:  0000000000000000 0000000000000002   ................
crash> struct rt_mutex ffff880222e8f628
struct rt_mutex {
  wait_lock = {
    raw_lock = {
      slock = 65537
    }
  },
  wait_list = {
    node_list = {
      next = 0xffff8802244c3d48,
      prev = 0xffff8802244c3d48
    }
  },
  owner = 0xffff880222f22c71,
  save_state = 0
}
crash> bt 0xffff880222f22c70
PID: 10635  TASK: ffff880222f22c70  CPU: 3   COMMAND: "mount"
 #0 [ffff8802216a9868] schedule at ffffffff8144584b
 #1 [ffff8802216a9910] schedule_timeout at ffffffff81446865
 #2 [ffff8802216a99a0] wait_for_common at ffffffff81445f74
 #3 [ffff8802216a9a30] flush_work at ffffffff810712d3
 #4 [ffff8802216a9ab0] schedule_on_each_cpu at ffffffff81074463
 #5 [ffff8802216a9ae0] invalidate_bdev at ffffffff81178aba
 #6 [ffff8802216a9af0] vfs_load_quota_inode at ffffffff811a3632
 #7 [ffff8802216a9b50] dquot_quota_on_mount at ffffffff811a375c
 #8 [ffff8802216a9b80] finish_unfinished at ffffffffa05dd8b0 [reiserfs]
 #9 [ffff8802216a9cc0] reiserfs_fill_super at ffffffffa05de825 [reiserfs]
    RIP: 00007f7b9303997a  RSP: 00007ffff443c7a8  RFLAGS: 00010202
    RAX: 00000000000000a5  RBX: ffffffff8144ef12  RCX: 00007f7b932e9ee0
    RDX: 00007f7b93d9a400  RSI: 00007f7b93d9a3e0  RDI: 00007f7b93d9a3c0
    RBP: 00007f7b93d9a2c0   R8: 00007f7b93d9a550   R9: 0000000000000001
    R10: ffffffffc0ed040e  R11: 0000000000000202  R12: 000000000000040e
    R13: 0000000000000000  R14: 00000000c0ed040e  R15: 00007ffff443ca20
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

Signed-off-by: Mike Galbraith <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Acked-by: Mike Galbraith <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: Tim Gardner <[email protected]>
bgly pushed a commit that referenced this pull request Nov 30, 2016
BugLink: http://bugs.launchpad.net/bugs/1637520

commit b6bc1c7 upstream.

Function ib_create_qp() was failing to return an error when
rdma_rw_init_mrs() fails, causing a crash further down in ib_create_qp()
when trying to dereferece the qp pointer which was actually a negative
errno.

The crash:

crash> log|grep BUG
[  136.458121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
crash> bt
PID: 3736   TASK: ffff8808543215c0  CPU: 2   COMMAND: "kworker/u64:2"
 #0 [ffff88084d323340] machine_kexec at ffffffff8105fbb0
 #1 [ffff88084d3233b0] __crash_kexec at ffffffff81116758
 #2 [ffff88084d323480] crash_kexec at ffffffff8111682d
 #3 [ffff88084d3234b0] oops_end at ffffffff81032bd6
 #4 [ffff88084d3234e0] no_context at ffffffff8106e431
 #5 [ffff88084d323530] __bad_area_nosemaphore at ffffffff8106e610
 #6 [ffff88084d323590] bad_area_nosemaphore at ffffffff8106e6f4
 #7 [ffff88084d3235a0] __do_page_fault at ffffffff8106ebdc
 #8 [ffff88084d323620] do_page_fault at ffffffff8106f057
 #9 [ffff88084d323660] page_fault at ffffffff816e3148
    [exception RIP: ib_create_qp+427]
    RIP: ffffffffa02554fb  RSP: ffff88084d323718  RFLAGS: 00010246
    RAX: 0000000000000004  RBX: fffffffffffffff4  RCX: 000000018020001f
    RDX: ffff880830997fc0  RSI: 0000000000000001  RDI: ffff88085f407200
    RBP: ffff88084d323778   R8: 0000000000000001   R9: ffffea0020bae210
    R10: ffffea0020bae218  R11: 0000000000000001  R12: ffff88084d3237c8
    R13: 00000000fffffff4  R14: ffff880859fa5000  R15: ffff88082eb89800
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
#10 [ffff88084d323780] rdma_create_qp at ffffffffa0782681 [rdma_cm]
#11 [ffff88084d3237b0] nvmet_rdma_create_queue_ib at ffffffffa07c43f3 [nvmet_rdma]
#12 [ffff88084d323860] nvmet_rdma_alloc_queue at ffffffffa07c5ba9 [nvmet_rdma]
#13 [ffff88084d323900] nvmet_rdma_queue_connect at ffffffffa07c5c96 [nvmet_rdma]
#14 [ffff88084d323980] nvmet_rdma_cm_handler at ffffffffa07c6450 [nvmet_rdma]
#15 [ffff88084d3239b0] iw_conn_req_handler at ffffffffa0787480 [rdma_cm]
#16 [ffff88084d323a60] cm_conn_req_handler at ffffffffa0775f06 [iw_cm]
#17 [ffff88084d323ab0] process_event at ffffffffa0776019 [iw_cm]
#18 [ffff88084d323af0] cm_work_handler at ffffffffa0776170 [iw_cm]
#19 [ffff88084d323cb0] process_one_work at ffffffff810a1483
#20 [ffff88084d323d90] worker_thread at ffffffff810a211d
#21 [ffff88084d323ec0] kthread at ffffffff810a6c5c
#22 [ffff88084d323f50] ret_from_fork at ffffffff816e1ebf

Fixes: 632bc3f ("IB/core, RDMA RW API: Do not exceed QP SGE send limit")
Signed-off-by: Steve Wise <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: Tim Gardner <[email protected]>
bgly pushed a commit that referenced this pull request Jan 31, 2017
BugLink: http://bugs.launchpad.net/bugs/1627730

commit 293f293 upstream.

On arm/arm64, we depend on the kvm_unmap_hva* callbacks (via
mmu_notifiers::invalidate_*) to unmap the stage2 pagetables when
the userspace buffer gets unmapped. However, when the Hypervisor
process exits without explicit unmap of the guest buffers, the only
notifier we get is kvm_arch_flush_shadow_all() (via mmu_notifier::release
) which does nothing on arm. Later this causes us to access pages that
were already released [via exit_mmap() -> unmap_vmas()] when we actually
get to unmap the stage2 pagetable [via kvm_arch_destroy_vm() ->
kvm_free_stage2_pgd()]. This triggers crashes with CONFIG_DEBUG_PAGEALLOC,
which unmaps any free'd pages from the linear map.

 [  757.644120] Unable to handle kernel paging request at virtual address
  ffff800661e00000
 [  757.652046] pgd = ffff20000b1a2000
 [  757.655471] [ffff800661e00000] *pgd=00000047fffe3003, *pud=00000047fcd8c003,
  *pmd=00000047fcc7c003, *pte=00e8004661e00712
 [  757.666492] Internal error: Oops: 96000147 [#3] PREEMPT SMP
 [  757.672041] Modules linked in:
 [  757.675100] CPU: 7 PID: 3630 Comm: qemu-system-aar Tainted: G      D
 4.8.0-rc1 #3
 [  757.683240] Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board,
  BIOS 3.06.15 Aug 19 2016
 [  757.692938] task: ffff80069cdd3580 task.stack: ffff8006adb7c000
 [  757.698840] PC is at __flush_dcache_area+0x1c/0x40
 [  757.703613] LR is at kvm_flush_dcache_pmd+0x60/0x70
 [  757.708469] pc : [<ffff20000809dbdc>] lr : [<ffff2000080b4a70>] pstate: 20000145
 ...
 [  758.357249] [<ffff20000809dbdc>] __flush_dcache_area+0x1c/0x40
 [  758.363059] [<ffff2000080b6748>] unmap_stage2_range+0x458/0x5f0
 [  758.368954] [<ffff2000080b708c>] kvm_free_stage2_pgd+0x34/0x60
 [  758.374761] [<ffff2000080b2280>] kvm_arch_destroy_vm+0x20/0x68
 [  758.380570] [<ffff2000080aa330>] kvm_put_kvm+0x210/0x358
 [  758.385860] [<ffff2000080aa524>] kvm_vm_release+0x2c/0x40
 [  758.391239] [<ffff2000082ad234>] __fput+0x114/0x2e8
 [  758.396096] [<ffff2000082ad46c>] ____fput+0xc/0x18
 [  758.400869] [<ffff200008104658>] task_work_run+0x108/0x138
 [  758.406332] [<ffff2000080dc8ec>] do_exit+0x48c/0x10e8
 [  758.411363] [<ffff2000080dd5fc>] do_group_exit+0x6c/0x130
 [  758.416739] [<ffff2000080ed924>] get_signal+0x284/0xa18
 [  758.421943] [<ffff20000808a098>] do_signal+0x158/0x860
 [  758.427060] [<ffff20000808aad4>] do_notify_resume+0x6c/0x88
 [  758.432608] [<ffff200008083624>] work_pending+0x10/0x14
 [  758.437812] Code: 9ac32042 8b010001 d1000443 8a230000 (d50b7e20)

This patch fixes the issue by moving the kvm_free_stage2_pgd() to
kvm_arch_flush_shadow_all().

Tested-by: Itaru Kitayama <[email protected]>
Reported-by: Itaru Kitayama <[email protected]>
Reported-by: James Morse <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christoffer Dall <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Christoffer Dall <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: Tim Gardner <[email protected]>
bgly pushed a commit that referenced this pull request Jan 31, 2017
BugLink: http://bugs.launchpad.net/bugs/1637501

commit 420902c upstream.

If we hold the superblock lock while calling reiserfs_quota_on_mount(), we can
deadlock our own worker - mount blocks kworker/3:2, sleeps forever more.

crash> ps|grep UN
    715      2   3  ffff880220734d30  UN   0.0       0      0  [kworker/3:2]
   9369   9341   2  ffff88021ffb7560  UN   1.3  493404 123184  Xorg
   9665   9664   3  ffff880225b92ab0  UN   0.0   47368    812  udisks-daemon
  10635  10403   3  ffff880222f22c70  UN   0.0   14904    936  mount
crash> bt ffff880220734d30
PID: 715    TASK: ffff880220734d30  CPU: 3   COMMAND: "kworker/3:2"
 #0 [ffff8802244c3c20] schedule at ffffffff8144584b
 #1 [ffff8802244c3cc8] __rt_mutex_slowlock at ffffffff814472b3
 #2 [ffff8802244c3d28] rt_mutex_slowlock at ffffffff814473f5
 #3 [ffff8802244c3dc8] reiserfs_write_lock at ffffffffa05f28fd [reiserfs]
 #4 [ffff8802244c3de8] flush_async_commits at ffffffffa05ec91d [reiserfs]
 #5 [ffff8802244c3e08] process_one_work at ffffffff81073726
 #6 [ffff8802244c3e68] worker_thread at ffffffff81073eba
 #7 [ffff8802244c3ec8] kthread at ffffffff810782e0
 #8 [ffff8802244c3f48] kernel_thread_helper at ffffffff81450064
crash> rd ffff8802244c3cc8 10
ffff8802244c3cc8:  ffffffff814472b3 ffff880222f23250   .rD.....P2."....
ffff8802244c3cd8:  0000000000000000 0000000000000286   ................
ffff8802244c3ce8:  ffff8802244c3d30 ffff880220734d80   0=L$.....Ms ....
ffff8802244c3cf8:  ffff880222e8f628 0000000000000000   (.."............
ffff8802244c3d08:  0000000000000000 0000000000000002   ................
crash> struct rt_mutex ffff880222e8f628
struct rt_mutex {
  wait_lock = {
    raw_lock = {
      slock = 65537
    }
  },
  wait_list = {
    node_list = {
      next = 0xffff8802244c3d48,
      prev = 0xffff8802244c3d48
    }
  },
  owner = 0xffff880222f22c71,
  save_state = 0
}
crash> bt 0xffff880222f22c70
PID: 10635  TASK: ffff880222f22c70  CPU: 3   COMMAND: "mount"
 #0 [ffff8802216a9868] schedule at ffffffff8144584b
 #1 [ffff8802216a9910] schedule_timeout at ffffffff81446865
 #2 [ffff8802216a99a0] wait_for_common at ffffffff81445f74
 #3 [ffff8802216a9a30] flush_work at ffffffff810712d3
 #4 [ffff8802216a9ab0] schedule_on_each_cpu at ffffffff81074463
 #5 [ffff8802216a9ae0] invalidate_bdev at ffffffff81178aba
 #6 [ffff8802216a9af0] vfs_load_quota_inode at ffffffff811a3632
 #7 [ffff8802216a9b50] dquot_quota_on_mount at ffffffff811a375c
 #8 [ffff8802216a9b80] finish_unfinished at ffffffffa05dd8b0 [reiserfs]
 #9 [ffff8802216a9cc0] reiserfs_fill_super at ffffffffa05de825 [reiserfs]
    RIP: 00007f7b9303997a  RSP: 00007ffff443c7a8  RFLAGS: 00010202
    RAX: 00000000000000a5  RBX: ffffffff8144ef12  RCX: 00007f7b932e9ee0
    RDX: 00007f7b93d9a400  RSI: 00007f7b93d9a3e0  RDI: 00007f7b93d9a3c0
    RBP: 00007f7b93d9a2c0   R8: 00007f7b93d9a550   R9: 0000000000000001
    R10: ffffffffc0ed040e  R11: 0000000000000202  R12: 000000000000040e
    R13: 0000000000000000  R14: 00000000c0ed040e  R15: 00007ffff443ca20
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

Signed-off-by: Mike Galbraith <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Acked-by: Mike Galbraith <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: Tim Gardner <[email protected]>
bgly pushed a commit that referenced this pull request Jan 31, 2017
BugLink: http://bugs.launchpad.net/bugs/1650601

commit f5527ff upstream.

This fixes CVE-2016-8650.

If mpi_powm() is given a zero exponent, it wants to immediately return
either 1 or 0, depending on the modulus.  However, if the result was
initalised with zero limb space, no limbs space is allocated and a
NULL-pointer exception ensues.

Fix this by allocating a minimal amount of limb space for the result when
the 0-exponent case when the result is 1 and not touching the limb space
when the result is 0.

This affects the use of RSA keys and X.509 certificates that carry them.

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
PGD 0
Oops: 0002 [#1] SMP
Modules linked in:
CPU: 3 PID: 3014 Comm: keyctl Not tainted 4.9.0-rc6-fscache+ torvalds#278
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task: ffff8804011944c0 task.stack: ffff880401294000
RIP: 0010:[<ffffffff8138ce5d>]  [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
RSP: 0018:ffff880401297ad8  EFLAGS: 00010212
RAX: 0000000000000000 RBX: ffff88040868bec0 RCX: ffff88040868bba0
RDX: ffff88040868b260 RSI: ffff88040868bec0 RDI: ffff88040868bee0
RBP: ffff880401297ba8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000047 R11: ffffffff8183b210 R12: 0000000000000000
R13: ffff8804087c7600 R14: 000000000000001f R15: ffff880401297c50
FS:  00007f7a7918c700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000401250000 CR4: 00000000001406e0
Stack:
 ffff88040868bec0 0000000000000020 ffff880401297b00 ffffffff81376cd4
 0000000000000100 ffff880401297b10 ffffffff81376d12 ffff880401297b30
 ffffffff81376f37 0000000000000100 0000000000000000 ffff880401297ba8
Call Trace:
 [<ffffffff81376cd4>] ? __sg_page_iter_next+0x43/0x66
 [<ffffffff81376d12>] ? sg_miter_get_next_page+0x1b/0x5d
 [<ffffffff81376f37>] ? sg_miter_next+0x17/0xbd
 [<ffffffff8138ba3a>] ? mpi_read_raw_from_sgl+0xf2/0x146
 [<ffffffff8132a95c>] rsa_verify+0x9d/0xee
 [<ffffffff8132acca>] ? pkcs1pad_sg_set_buf+0x2e/0xbb
 [<ffffffff8132af40>] pkcs1pad_verify+0xc0/0xe1
 [<ffffffff8133cb5e>] public_key_verify_signature+0x1b0/0x228
 [<ffffffff8133d974>] x509_check_for_self_signed+0xa1/0xc4
 [<ffffffff8133cdde>] x509_cert_parse+0x167/0x1a1
 [<ffffffff8133d609>] x509_key_preparse+0x21/0x1a1
 [<ffffffff8133c3d7>] asymmetric_key_preparse+0x34/0x61
 [<ffffffff812fc9f3>] key_create_or_update+0x145/0x399
 [<ffffffff812fe227>] SyS_add_key+0x154/0x19e
 [<ffffffff81001c2b>] do_syscall_64+0x80/0x191
 [<ffffffff816825e4>] entry_SYSCALL64_slow_path+0x25/0x25
Code: 56 41 55 41 54 53 48 81 ec a8 00 00 00 44 8b 71 04 8b 42 04 4c 8b 67 18 45 85 f6 89 45 80 0f 84 b4 06 00 00 85 c0 75 2f 41 ff ce <49> c7 04 24 01 00 00 00 b0 01 75 0b 48 8b 41 18 48 83 38 01 0f
RIP  [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6
 RSP <ffff880401297ad8>
CR2: 0000000000000000
---[ end trace d82015255d4a5d8d ]---

Basically, this is a backport of a libgcrypt patch:

	http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libgcrypt.git;a=patch;h=6e1adb05d290aeeb1c230c763970695f4a538526

Fixes: cdec9cb ("crypto: GnuPG based MPI lib - source files (part 1)")
Signed-off-by: Andrey Ryabinin <[email protected]>
Signed-off-by: David Howells <[email protected]>
cc: Dmitry Kasatkin <[email protected]>
cc: [email protected]
Signed-off-by: James Morris <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Luis Henriques <[email protected]>
bgly pushed a commit that referenced this pull request May 8, 2017
BugLink: http://bugs.launchpad.net/bugs/1662666

In blk_mq_map_swqueue, there is a memory optimization that frees the
tags of a queue that has gone unmapped.  Later, if that hctx is remapped
after another topology change, the tags need to be reallocated.

If this allocation fails, a simple WARN_ON triggers, but the block layer
ends up with an active hctx without any corresponding set of tags.
Then, any income IO to that hctx can trigger an Oops.

I can reproduce it consistently by running IO, flipping CPUs on and off
and eventually injecting a memory allocation failure in that path.

In the fix below, if the system experiences a failed allocation of any
hctx's tags, we remap all the ctxs of that queue to the hctx_0, which
should always keep it's tags.  There is a minor performance hit, since
our mapping just got worse after the error path, but this is
the simplest solution to handle this error path.  The performance hit
will disappear after another successful remap.

I considered dropping the memory optimization all together, but it
seemed a bad trade-off to handle this very specific error case.

This should apply cleanly on top of Jens' for-next branch.

The Oops is the one below:

SP (3fff935ce4d0) is in userspace
1:mon> e
cpu 0x1: Vector: 300 (Data Access) at [c000000fe99eb110]
    pc: c0000000005e868c: __sbitmap_queue_get+0x2c/0x180
    lr: c000000000575328: __bt_get+0x48/0xd0
    sp: c000000fe99eb390
   msr: 900000010280b033
   dar: 28
 dsisr: 40000000
  current = 0xc000000fe9966800
  paca    = 0xc000000007e80300   softe: 0        irq_happened: 0x01
    pid   = 11035, comm = aio-stress
Linux version 4.8.0-rc6+ (root@bean) (gcc version 5.4.0 20160609
(Ubuntu/IBM 5.4.0-6ubuntu1~16.04.2) ) #3 SMP Mon Oct 10 20:16:53 CDT 2016
1:mon> s
[c000000fe99eb3d0] c000000000575328 __bt_get+0x48/0xd0
[c000000fe99eb400] c000000000575838 bt_get.isra.1+0x78/0x2d0
[c000000fe99eb480] c000000000575cb4 blk_mq_get_tag+0x44/0x100
[c000000fe99eb4b0] c00000000056f6f4 __blk_mq_alloc_request+0x44/0x220
[c000000fe99eb500] c000000000570050 blk_mq_map_request+0x100/0x1f0
[c000000fe99eb580] c000000000574650 blk_mq_make_request+0xf0/0x540
[c000000fe99eb640] c000000000561c44 generic_make_request+0x144/0x230
[c000000fe99eb690] c000000000561e00 submit_bio+0xd0/0x200
[c000000fe99eb740] c0000000003ef740 ext4_io_submit+0x90/0xb0
[c000000fe99eb770] c0000000003e95d8 ext4_writepages+0x588/0xdd0
[c000000fe99eb910] c00000000025a9f0 do_writepages+0x60/0xc0
[c000000fe99eb940] c000000000246c88 __filemap_fdatawrite_range+0xf8/0x180
[c000000fe99eb9e0] c000000000246f90 filemap_write_and_wait_range+0x70/0xf0
[c000000fe99eba20] c0000000003dd844 ext4_sync_file+0x214/0x540
[c000000fe99eba80] c000000000364718 vfs_fsync_range+0x78/0x130
[c000000fe99ebad0] c0000000003dd46c ext4_file_write_iter+0x35c/0x430
[c000000fe99ebb90] c00000000038c280 aio_run_iocb+0x3b0/0x450
[c000000fe99ebce0] c00000000038dc28 do_io_submit+0x368/0x730
[c000000fe99ebe30] c000000000009404 system_call+0x38/0xec

Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Cc: Brian King <[email protected]>
Cc: Douglas Miller <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Douglas Miller <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
(cherry picked from commit d1b1cea)
Signed-off-by: Tim Gardner <[email protected]>
Acked-by: Stefan Bader <[email protected]>
Acked-by: Marcelo Cerri <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
bgly pushed a commit that referenced this pull request Jul 11, 2017
For all the entries allocated from the ring cmd area, the memory is
something like the stack memory, which will always reserve the old
data, so the entry->req.iov_bidi_cnt maybe none zero.

On some environments, the crash could be reporduce very easy and some
not. The following is the crash core trace:

[  240.143969] CPU: 0 PID: 1285 Comm: iscsi_trx Not tainted
4.12.0-rc1+ #3
[  240.150607] Hardware name: ASUS All Series/H87-PRO, BIOS 2104
10/28/2014
[  240.157331] task: ffff8807de4f5800 task.stack:
ffffc900047dc000
[  240.163270] RIP: 0010:memcpy_erms+0x6/0x10
[  240.167377] RSP: 0018:ffffc900047dfc68 EFLAGS: 00010202
[  240.172621] RAX: ffffc9065db85540 RBX: ffff8807f7980000 RCX:
0000000000000010
[  240.179771] RDX: 0000000000000010 RSI: ffff8807de574fe0 RDI:
ffffc9065db85540
[  240.186930] RBP: ffffc900047dfd30 R08: ffff8807de41b000 R09:
0000000000000000
[  240.194088] R10: 0000000000000040 R11: ffff8807e9b726f0 R12:
00000006565726b0
[  240.201246] R13: ffffc90007612ea0 R14: 000000065657d540 R15:
0000000000000000
[  240.208397] FS:  0000000000000000(0000)
GS:ffff88081fa00000(0000)
knlGS:0000000000000000
[  240.216510] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  240.222280] CR2: ffffc9065db85540 CR3: 0000000001c0f000 CR4:
00000000001406f0
[  240.229430] Call Trace:
[  240.231887]  ? tcmu_queue_cmd+0x83c/0xa80
[  240.235916]  ? target_check_reservation+0xcd/0x6f0
[  240.240725]  __target_execute_cmd+0x27/0xa0
[  240.244918]  target_execute_cmd+0x232/0x2c0
[  240.249124]  ? __local_bh_enable_ip+0x64/0xa0
[  240.253499]  iscsit_execute_cmd+0x20d/0x270
[  240.257693]  iscsit_sequence_cmd+0x110/0x190
[  240.261985]  iscsit_get_rx_pdu+0x360/0xc80
[  240.267565]  ? iscsi_target_rx_thread+0x54/0xd0
[  240.273571]  iscsi_target_rx_thread+0x9a/0xd0
[  240.279413]  kthread+0x113/0x150
[  240.284120]  ? iscsi_target_tx_thread+0x1e0/0x1e0
[  240.290297]  ? kthread_create_on_node+0x40/0x40
[  240.296297]  ret_from_fork+0x2e/0x40
[  240.301332] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48
89 d1 48
c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48
89 f8 48
89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e
40 38
[  240.321751] RIP: memcpy_erms+0x6/0x10 RSP: ffffc900047dfc68
[  240.328838] CR2: ffffc9065db85540
[  240.333667] ---[ end trace b7e5354cfb54d08b ]---

To fix this, just memset all the entry memory before using it, and
also to be more readable we adjust the bidi code.

Fixed: fe25cc3(tcmu: Recalculate the tcmu_cmd size to save cmd area
		memories)
Reported-by: Bryant G. Ly <[email protected]>
Tested-by: Damien Le Moal <[email protected]>
Signed-off-by: Xiubo Li <[email protected]>
bgly pushed a commit that referenced this pull request Jul 11, 2017
For all the entries allocated from the ring cmd area, the memory is
something like the stack memory, which will always reserve the old
data, so the entry->req.iov_bidi_cnt maybe none zero.

On some environments, the crash could be reporduce very easy and some
not. The following is the crash core trace:

[  240.143969] CPU: 0 PID: 1285 Comm: iscsi_trx Not tainted
4.12.0-rc1+ #3
[  240.150607] Hardware name: ASUS All Series/H87-PRO, BIOS 2104
10/28/2014
[  240.157331] task: ffff8807de4f5800 task.stack:
ffffc900047dc000
[  240.163270] RIP: 0010:memcpy_erms+0x6/0x10
[  240.167377] RSP: 0018:ffffc900047dfc68 EFLAGS: 00010202
[  240.172621] RAX: ffffc9065db85540 RBX: ffff8807f7980000 RCX:
0000000000000010
[  240.179771] RDX: 0000000000000010 RSI: ffff8807de574fe0 RDI:
ffffc9065db85540
[  240.186930] RBP: ffffc900047dfd30 R08: ffff8807de41b000 R09:
0000000000000000
[  240.194088] R10: 0000000000000040 R11: ffff8807e9b726f0 R12:
00000006565726b0
[  240.201246] R13: ffffc90007612ea0 R14: 000000065657d540 R15:
0000000000000000
[  240.208397] FS:  0000000000000000(0000)
GS:ffff88081fa00000(0000)
knlGS:0000000000000000
[  240.216510] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  240.222280] CR2: ffffc9065db85540 CR3: 0000000001c0f000 CR4:
00000000001406f0
[  240.229430] Call Trace:
[  240.231887]  ? tcmu_queue_cmd+0x83c/0xa80
[  240.235916]  ? target_check_reservation+0xcd/0x6f0
[  240.240725]  __target_execute_cmd+0x27/0xa0
[  240.244918]  target_execute_cmd+0x232/0x2c0
[  240.249124]  ? __local_bh_enable_ip+0x64/0xa0
[  240.253499]  iscsit_execute_cmd+0x20d/0x270
[  240.257693]  iscsit_sequence_cmd+0x110/0x190
[  240.261985]  iscsit_get_rx_pdu+0x360/0xc80
[  240.267565]  ? iscsi_target_rx_thread+0x54/0xd0
[  240.273571]  iscsi_target_rx_thread+0x9a/0xd0
[  240.279413]  kthread+0x113/0x150
[  240.284120]  ? iscsi_target_tx_thread+0x1e0/0x1e0
[  240.290297]  ? kthread_create_on_node+0x40/0x40
[  240.296297]  ret_from_fork+0x2e/0x40
[  240.301332] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48
89 d1 48
c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48
89 f8 48
89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e
40 38
[  240.321751] RIP: memcpy_erms+0x6/0x10 RSP: ffffc900047dfc68
[  240.328838] CR2: ffffc9065db85540
[  240.333667] ---[ end trace b7e5354cfb54d08b ]---

To fix this, just memset all the entry memory before using it, and
also to be more readable we adjust the bidi code.

Fixed: fe25cc3(tcmu: Recalculate the tcmu_cmd size to save cmd area
		memories)
Reported-by: Bryant G. Ly <[email protected]>
Tested-by: Damien Le Moal <[email protected]>
Signed-off-by: Xiubo Li <[email protected]>
bgly pushed a commit that referenced this pull request Aug 18, 2017
BugLink: http://bugs.launchpad.net/bugs/1662666

In blk_mq_map_swqueue, there is a memory optimization that frees the
tags of a queue that has gone unmapped.  Later, if that hctx is remapped
after another topology change, the tags need to be reallocated.

If this allocation fails, a simple WARN_ON triggers, but the block layer
ends up with an active hctx without any corresponding set of tags.
Then, any income IO to that hctx can trigger an Oops.

I can reproduce it consistently by running IO, flipping CPUs on and off
and eventually injecting a memory allocation failure in that path.

In the fix below, if the system experiences a failed allocation of any
hctx's tags, we remap all the ctxs of that queue to the hctx_0, which
should always keep it's tags.  There is a minor performance hit, since
our mapping just got worse after the error path, but this is
the simplest solution to handle this error path.  The performance hit
will disappear after another successful remap.

I considered dropping the memory optimization all together, but it
seemed a bad trade-off to handle this very specific error case.

This should apply cleanly on top of Jens' for-next branch.

The Oops is the one below:

SP (3fff935ce4d0) is in userspace
1:mon> e
cpu 0x1: Vector: 300 (Data Access) at [c000000fe99eb110]
    pc: c0000000005e868c: __sbitmap_queue_get+0x2c/0x180
    lr: c000000000575328: __bt_get+0x48/0xd0
    sp: c000000fe99eb390
   msr: 900000010280b033
   dar: 28
 dsisr: 40000000
  current = 0xc000000fe9966800
  paca    = 0xc000000007e80300   softe: 0        irq_happened: 0x01
    pid   = 11035, comm = aio-stress
Linux version 4.8.0-rc6+ (root@bean) (gcc version 5.4.0 20160609
(Ubuntu/IBM 5.4.0-6ubuntu1~16.04.2) ) #3 SMP Mon Oct 10 20:16:53 CDT 2016
1:mon> s
[c000000fe99eb3d0] c000000000575328 __bt_get+0x48/0xd0
[c000000fe99eb400] c000000000575838 bt_get.isra.1+0x78/0x2d0
[c000000fe99eb480] c000000000575cb4 blk_mq_get_tag+0x44/0x100
[c000000fe99eb4b0] c00000000056f6f4 __blk_mq_alloc_request+0x44/0x220
[c000000fe99eb500] c000000000570050 blk_mq_map_request+0x100/0x1f0
[c000000fe99eb580] c000000000574650 blk_mq_make_request+0xf0/0x540
[c000000fe99eb640] c000000000561c44 generic_make_request+0x144/0x230
[c000000fe99eb690] c000000000561e00 submit_bio+0xd0/0x200
[c000000fe99eb740] c0000000003ef740 ext4_io_submit+0x90/0xb0
[c000000fe99eb770] c0000000003e95d8 ext4_writepages+0x588/0xdd0
[c000000fe99eb910] c00000000025a9f0 do_writepages+0x60/0xc0
[c000000fe99eb940] c000000000246c88 __filemap_fdatawrite_range+0xf8/0x180
[c000000fe99eb9e0] c000000000246f90 filemap_write_and_wait_range+0x70/0xf0
[c000000fe99eba20] c0000000003dd844 ext4_sync_file+0x214/0x540
[c000000fe99eba80] c000000000364718 vfs_fsync_range+0x78/0x130
[c000000fe99ebad0] c0000000003dd46c ext4_file_write_iter+0x35c/0x430
[c000000fe99ebb90] c00000000038c280 aio_run_iocb+0x3b0/0x450
[c000000fe99ebce0] c00000000038dc28 do_io_submit+0x368/0x730
[c000000fe99ebe30] c000000000009404 system_call+0x38/0xec

Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Cc: Brian King <[email protected]>
Cc: Douglas Miller <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Douglas Miller <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
(cherry picked from commit d1b1cea)
Signed-off-by: Tim Gardner <[email protected]>
Acked-by: Stefan Bader <[email protected]>
Acked-by: Brad Figg <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
bgly pushed a commit that referenced this pull request Aug 18, 2017
BugLink: http://bugs.launchpad.net/bugs/1669016

[ Upstream commit 2bd624b ]

Commit 6664498 ("packet: call fanout_release, while UNREGISTERING a
netdev"), unfortunately, introduced the following issues.

1. calling mutex_lock(&fanout_mutex) (fanout_release()) from inside
rcu_read-side critical section. rcu_read_lock disables preemption, most often,
which prohibits calling sleeping functions.

[  ] include/linux/rcupdate.h:560 Illegal context switch in RCU read-side critical section!
[  ]
[  ] rcu_scheduler_active = 1, debug_locks = 0
[  ] 4 locks held by ovs-vswitchd/1969:
[  ]  #0:  (cb_lock){++++++}, at: [<ffffffff8158a6c9>] genl_rcv+0x19/0x40
[  ]  #1:  (ovs_mutex){+.+.+.}, at: [<ffffffffa04878ca>] ovs_vport_cmd_del+0x4a/0x100 [openvswitch]
[  ]  #2:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81564157>] rtnl_lock+0x17/0x20
[  ]  #3:  (rcu_read_lock){......}, at: [<ffffffff81614165>] packet_notifier+0x5/0x3f0
[  ]
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810c9077>] lockdep_rcu_suspicious+0x107/0x110
[  ]  [<ffffffff810a2da7>] ___might_sleep+0x57/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff810de93f>] ? vprintk_default+0x1f/0x30
[  ]  [<ffffffff81186e88>] ? printk+0x4d/0x4f
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

2. calling mutex_lock(&fanout_mutex) inside spin_lock(&po->bind_lock).
"sleeping function called from invalid context"

[  ] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[  ] in_atomic(): 1, irqs_disabled(): 0, pid: 1969, name: ovs-vswitchd
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff810a2f52>] ___might_sleep+0x202/0x210
[  ]  [<ffffffff810a2fd0>] __might_sleep+0x70/0x90
[  ]  [<ffffffff8162e80c>] mutex_lock_nested+0x3c/0x3a0
[  ]  [<ffffffff816106dd>] fanout_release+0x1d/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

3. calling dev_remove_pack(&fanout->prot_hook), from inside
spin_lock(&po->bind_lock) or rcu_read-side critical-section. dev_remove_pack()
-> synchronize_net(), which might sleep.

[  ] BUG: scheduling while atomic: ovs-vswitchd/1969/0x00000002
[  ] INFO: lockdep is turned off.
[  ] Call Trace:
[  ]  [<ffffffff813770c1>] dump_stack+0x85/0xc4
[  ]  [<ffffffff81186274>] __schedule_bug+0x64/0x73
[  ]  [<ffffffff8162b8cb>] __schedule+0x6b/0xd10
[  ]  [<ffffffff8162c5db>] schedule+0x6b/0x80
[  ]  [<ffffffff81630b1d>] schedule_timeout+0x38d/0x410
[  ]  [<ffffffff810ea3fd>] synchronize_sched_expedited+0x53d/0x810
[  ]  [<ffffffff810ea6de>] synchronize_rcu_expedited+0xe/0x10
[  ]  [<ffffffff8154eab5>] synchronize_net+0x35/0x50
[  ]  [<ffffffff8154eae3>] dev_remove_pack+0x13/0x20
[  ]  [<ffffffff8161077e>] fanout_release+0xbe/0xe0
[  ]  [<ffffffff81614459>] packet_notifier+0x2f9/0x3f0

4. fanout_release() races with calls from different CPU.

To fix the above problems, remove the call to fanout_release() under
rcu_read_lock(). Instead, call __dev_remove_pack(&fanout->prot_hook) and
netdev_run_todo will be happy that &dev->ptype_specific list is empty. In order
to achieve this, I moved dev_{add,remove}_pack() out of fanout_{add,release} to
__fanout_{link,unlink}. So, call to {,__}unregister_prot_hook() will make sure
fanout->prot_hook is removed as well.

Fixes: 6664498 ("packet: call fanout_release, while UNREGISTERING a netdev")
Reported-by: Eric Dumazet <[email protected]>
Signed-off-by: Anoob Soman <[email protected]>
Acked-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
bgly pushed a commit that referenced this pull request Aug 18, 2017
BugLink: http://bugs.launchpad.net/bugs/1673538

commit 9cf6cdb upstream.

Fixes a regression triggered by a change in the layout of
struct iio_chan_spec, but the real bug is in the driver which assumed
a specific structure layout in the first place. Hint: the two bits were
not OR:ed together as implied by the indentation prior to this patch,
there was a comma between them, which accidentally moved the ..._SCALE
bit to the next structure field. That field was .info_mask_shared_by_type
before the _available attributes was added by commit 5123960
("iio:core: add a callback to allow drivers to provide _available
attributes") and .info_mask_separate_available afterwards, and the
regression happened.

info_mask_shared_by_type is actually a better choice than the originally
intended info_mask_separate for the ..._SCALE bit since a constant is
returned from mpl3115_read_raw for the scale. Using
info_mask_shared_by_type also preserves the behavior from before the
regression and is therefore less likely to cause other interesting side
effects.

The above mentioned regression causes an unintended sysfs attibute to
show up that is not backed by code, in turn causing the following NULL
pointer defererence to happen on access.

Segmentation fault

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = ecc3c000
[00000000] *pgd=87f91831
Internal error: Oops: 80000007 [#1] SMP ARM
Modules linked in:
CPU: 1 PID: 1051 Comm: cat Not tainted 4.10.0-rc5-00009-gffd8858-dirty #3
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task: ed54ec00 task.stack: ee2bc000
PC is at 0x0
LR is at iio_read_channel_info_avail+0x40/0x280
pc : [<00000000>]    lr : [<c06fbc1c>]    psr: a0070013
sp : ee2bdda8  ip : 00000000  fp : ee2bddf4
r10: c0a53c74  r9 : ed79f000  r8 : ee8d1018
r7 : 00001000  r6 : 00000fff  r5 : ee8b9a00  r4 : ed79f000
r3 : ee2bddc4  r2 : ee2bddbc  r1 : c0a86dcc  r0 : ee8d1000
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 10c5387d  Table: 3cc3c04a  DAC: 00000051
Process cat (pid: 1051, stack limit = 0xee2bc210)
Stack: (0xee2bdda8 to 0xee2be000)
dda0:                   ee2bddc0 00000002 c016d720 c016d394 ed54ec00 00000000
ddc0: 60070013 ed413780 00000001 edffd480 ee8b9a00 00000fff 00001000 ee8d1018
dde0: ed79f000 c0a53c74 ee2bde0c ee2bddf8 c0513c58 c06fbbe8 edffd480 edffd540
de00: ee2bde3c ee2bde10 c0293474 c0513c40 c02933e4 ee2bde60 00000001 ed413780
de20: 00000001 ed413780 00000000 edffd480 ee2bde4c ee2bde40 c0291d00 c02933f0
de40: ee2bde9c ee2bde50 c024679c c0291ce0 edffd4b0 b6e37000 00020000 ee2bdf78
de60: 00000000 00000000 ed54ec00 ed013200 00000817 c0a111fc edffd540 ed413780
de80: b6e37000 00020000 00020000 ee2bdf78 ee2bded4 ee2bdea0 c0292890 c0246604
dea0: c0117940 c016ba50 00000025 c0a111fc b6e37000 ed413780 ee2bdf78 00020000
dec0: ee2bc000 b6e37000 ee2bdf44 ee2bded8 c021d158 c0292770 c0117764 b6e36004
dee0: c0f0d7c4 ee2bdfb0 b6f89228 00021008 ee2bdfac ee2bdf00 c0101374 c0117770
df00: 00000000 00000000 ee2bc000 00000000 ee2bdf34 ee2bdf20 c016ba04 c0171080
df20: 00000000 00020000 ed413780 b6e37000 00000000 ee2bdf78 ee2bdf74 ee2bdf48
df40: c021e7a0 c021d130 c023e300 c023e280 ee2bdf74 00000000 00000000 ed413780
df60: ed413780 00020000 ee2bdfa4 ee2bdf78 c021e870 c021e71c 00000000 00000000
df80: 00020000 00020000 b6e37000 00000003 c0108084 00000000 00000000 ee2bdfa8
dfa0: c0107ee0 c021e838 00020000 00020000 00000003 b6e37000 00020000 0001a2b4
dfc0: 00020000 00020000 b6e37000 00000003 7fffe000 00000000 00000000 00020000
dfe0: 00000000 be98eb4c 0000c740 b6f1985c 60070010 00000003 00000000 00000000
Backtrace:
[<c06fbbdc>] (iio_read_channel_info_avail) from [<c0513c58>] (dev_attr_show+0x24/0x50)
 r10:c0a53c74 r9:ed79f000 r8:ee8d1018 r7:00001000 r6:00000fff r5:ee8b9a00
 r4:edffd480
[<c0513c34>] (dev_attr_show) from [<c0293474>] (sysfs_kf_seq_show+0x90/0x110)
 r5:edffd540 r4:edffd480
[<c02933e4>] (sysfs_kf_seq_show) from [<c0291d00>] (kernfs_seq_show+0x2c/0x30)
 r10:edffd480 r9:00000000 r8:ed413780 r7:00000001 r6:ed413780 r5:00000001
 r4:ee2bde60 r3:c02933e4
[<c0291cd4>] (kernfs_seq_show) from [<c024679c>] (seq_read+0x1a4/0x4e0)
[<c02465f8>] (seq_read) from [<c0292890>] (kernfs_fop_read+0x12c/0x1cc)
 r10:ee2bdf78 r9:00020000 r8:00020000 r7:b6e37000 r6:ed413780 r5:edffd540
 r4:c0a111fc
[<c0292764>] (kernfs_fop_read) from [<c021d158>] (__vfs_read+0x34/0x118)
 r10:b6e37000 r9:ee2bc000 r8:00020000 r7:ee2bdf78 r6:ed413780 r5:b6e37000
 r4:c0a111fc
[<c021d124>] (__vfs_read) from [<c021e7a0>] (vfs_read+0x90/0x11c)
 r8:ee2bdf78 r7:00000000 r6:b6e37000 r5:ed413780 r4:00020000
[<c021e710>] (vfs_read) from [<c021e870>] (SyS_read+0x44/0x90)
 r8:00020000 r7:ed413780 r6:ed413780 r5:00000000 r4:00000000
[<c021e82c>] (SyS_read) from [<c0107ee0>] (ret_fast_syscall+0x0/0x1c)
 r10:00000000 r8:c0108084 r7:00000003 r6:b6e37000 r5:00020000 r4:00020000
Code: bad PC value
---[ end trace 9c4938ccd0389004 ]---

Fixes: cc26ad4 ("iio: Add Freescale MPL3115A2 pressure / temperature sensor driver")
Fixes: 5123960 ("iio:core: add a callback to allow drivers to provide _available attributes")
Reported-by: Ken Lin <[email protected]>
Tested-by: Ken Lin <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
bgly pushed a commit that referenced this pull request Aug 18, 2017
BugLink: http://bugs.launchpad.net/bugs/1673538

commit 6773386 upstream.

Kernels built with CONFIG_KASAN=y report the following BUG for rtl8192cu
and rtl8192c-common:

==================================================================
BUG: KASAN: slab-out-of-bounds in rtl92c_dm_bt_coexist+0x858/0x1e40
     [rtl8192c_common] at addr ffff8801c90edb08
Read of size 1 by task kworker/0:1/38
page:ffffea0007243800 count:1 mapcount:0 mapping:          (null)
     index:0x0 compound_mapcount: 0
flags: 0x8000000000004000(head)
page dumped because: kasan: bad access detected
CPU: 0 PID: 38 Comm: kworker/0:1 Not tainted 4.9.7-gentoo #3
Hardware name: Gigabyte Technology Co., Ltd. To be filled by
     O.E.M./Z77-DS3H, BIOS F11a 11/13/2013
Workqueue: rtl92c_usb rtl_watchdog_wq_callback [rtlwifi]
  0000000000000000 ffffffff829eea33 ffff8801d7f0fa30 ffff8801c90edb08
  ffffffff824c0f09 ffff8801d4abee80 0000000000000004 0000000000000297
  ffffffffc070b57c ffff8801c7aa7c48 ffff880100000004 ffffffff000003e8
Call Trace:
  [<ffffffff829eea33>] ? dump_stack+0x5c/0x79
  [<ffffffff824c0f09>] ? kasan_report_error+0x4b9/0x4e0
  [<ffffffffc070b57c>] ? _usb_read_sync+0x15c/0x280 [rtl_usb]
  [<ffffffff824c0f75>] ? __asan_report_load1_noabort+0x45/0x50
  [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common]
  [<ffffffffc06d7a88>] ? rtl92c_dm_bt_coexist+0x858/0x1e40 [rtl8192c_common]
  [<ffffffffc06d0cbe>] ? rtl92c_dm_rf_saving+0x96e/0x1330 [rtl8192c_common]
...

The problem is due to rtl8192ce and rtl8192cu sharing routines, and having
different layouts of struct rtl_pci_priv, which is used by rtl8192ce, and
struct rtl_usb_priv, which is used by rtl8192cu. The problem was resolved
by placing the struct bt_coexist_info at the head of each of those private
areas.

Reported-and-tested-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Larry Finger <[email protected]>
Cc: Dmitry Osipenko <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
bgly pushed a commit that referenced this pull request Aug 18, 2017
BugLink: http://bugs.launchpad.net/bugs/1673541

commit 0a6fdbd upstream.

Avoid that srp_process_rsp() overwrites the status information
in ch if the SRP target response timed out and processing of
another task management function has already started. Avoid that
issuing multiple task management functions concurrently triggers
list corruption. This patch prevents that the following stack
trace appears in the system log:

WARNING: CPU: 8 PID: 9269 at lib/list_debug.c:52 __list_del_entry_valid+0xbc/0xc0
list_del corruption. prev->next should be ffffc90004bb7b00, but was ffff8804052ecc68
CPU: 8 PID: 9269 Comm: sg_reset Tainted: G        W       4.10.0-rc7-dbg+ #3
Call Trace:
 dump_stack+0x68/0x93
 __warn+0xc6/0xe0
 warn_slowpath_fmt+0x4a/0x50
 __list_del_entry_valid+0xbc/0xc0
 wait_for_completion_timeout+0x12e/0x170
 srp_send_tsk_mgmt+0x1ef/0x2d0 [ib_srp]
 srp_reset_device+0x5b/0x110 [ib_srp]
 scsi_ioctl_reset+0x1c7/0x290
 scsi_ioctl+0x12a/0x420
 sd_ioctl+0x9d/0x100
 blkdev_ioctl+0x51e/0x9f0
 block_ioctl+0x38/0x40
 do_vfs_ioctl+0x8f/0x700
 SyS_ioctl+0x3c/0x70
 entry_SYSCALL_64_fastpath+0x18/0xad

Signed-off-by: Bart Van Assche <[email protected]>
Cc: Israel Rukshin <[email protected]>
Cc: Max Gurtovoy <[email protected]>
Cc: Laurence Oberman <[email protected]>
Cc: Steve Feeley <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
bgly pushed a commit that referenced this pull request Aug 18, 2017
BugLink: http://bugs.launchpad.net/bugs/1675789

[ Upstream commit d5afb6f ]

The code where sk_clone() came from created a new socket and locked it,
but then, on the error path didn't unlock it.

This problem stayed there for a long while, till b0691c8 ("net:
Unlock sock before calling sk_free()") fixed it, but unfortunately the
callers of sk_clone() (now sk_clone_locked()) were not audited and the
one in dccp_create_openreq_child() remained.

Now in the age of the syskaller fuzzer, this was finally uncovered, as
reported by Dmitry:

 ---- 8< ----

I've got the following report while running syzkaller fuzzer on
86292b3 ("Merge branch 'akpm' (patches from Andrew)")

  [ BUG: held lock freed! ]
  4.10.0+ torvalds#234 Not tainted
  -------------------------
  syz-executor6/6898 is freeing memory
  ffff88006286cac0-ffff88006286d3b7, with a lock still held there!
   (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock
  include/linux/spinlock.h:299 [inline]
   (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>]
  sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504
  5 locks held by syz-executor6/6898:
   #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>] lock_sock
  include/net/sock.h:1460 [inline]
   #0:  (sk_lock-AF_INET6){+.+.+.}, at: [<ffffffff839a34b4>]
  inet_stream_connect+0x44/0xa0 net/ipv4/af_inet.c:681
   #1:  (rcu_read_lock){......}, at: [<ffffffff83bc1c2a>]
  inet6_csk_xmit+0x12a/0x5d0 net/ipv6/inet6_connection_sock.c:126
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_unlink
  include/linux/skbuff.h:1767 [inline]
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>] __skb_dequeue
  include/linux/skbuff.h:1783 [inline]
   #2:  (rcu_read_lock){......}, at: [<ffffffff8369b424>]
  process_backlog+0x264/0x730 net/core/dev.c:4835
   #3:  (rcu_read_lock){......}, at: [<ffffffff83aeb5c0>]
  ip6_input_finish+0x0/0x1700 net/ipv6/ip6_input.c:59
   #4:  (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>] spin_lock
  include/linux/spinlock.h:299 [inline]
   #4:  (slock-AF_INET6){+.-...}, at: [<ffffffff8362c2c9>]
  sk_clone_lock+0x3d9/0x12c0 net/core/sock.c:1504

Fix it just like was done by b0691c8 ("net: Unlock sock before calling
sk_free()").

Reported-by: Dmitry Vyukov <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Gerrit Renker <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Tim Gardner <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
bgly pushed a commit that referenced this pull request Aug 18, 2017
BugLink: http://bugs.launchpad.net/bugs/1691418

[ Upstream commit ddc665a ]

When the instruction right before the branch destination is
a 64 bit load immediate, we currently calculate the wrong
jump offset in the ctx->offset[] array as we only account
one instruction slot for the 64 bit load immediate although
it uses two BPF instructions. Fix it up by setting the offset
into the right slot after we incremented the index.

Before (ldimm64 test 1):

  [...]
  00000020:  52800007  mov w7, #0x0 // #0
  00000024:  d2800060  mov x0, #0x3 // #3
  00000028:  d2800041  mov x1, #0x2 // #2
  0000002c:  eb01001f  cmp x0, x1
  00000030:  54ffff82  b.cs 0x00000020
  00000034:  d29fffe7  mov x7, #0xffff // #65535
  00000038:  f2bfffe7  movk x7, #0xffff, lsl #16
  0000003c:  f2dfffe7  movk x7, #0xffff, lsl #32
  00000040:  f2ffffe7  movk x7, #0xffff, lsl torvalds#48
  00000044:  d29dddc7  mov x7, #0xeeee // #61166
  00000048:  f2bdddc7  movk x7, #0xeeee, lsl #16
  0000004c:  f2ddddc7  movk x7, #0xeeee, lsl #32
  00000050:  f2fdddc7  movk x7, #0xeeee, lsl torvalds#48
  [...]

After (ldimm64 test 1):

  [...]
  00000020:  52800007  mov w7, #0x0 // #0
  00000024:  d2800060  mov x0, #0x3 // #3
  00000028:  d2800041  mov x1, #0x2 // #2
  0000002c:  eb01001f  cmp x0, x1
  00000030:  540000a2  b.cs 0x00000044
  00000034:  d29fffe7  mov x7, #0xffff // #65535
  00000038:  f2bfffe7  movk x7, #0xffff, lsl #16
  0000003c:  f2dfffe7  movk x7, #0xffff, lsl #32
  00000040:  f2ffffe7  movk x7, #0xffff, lsl torvalds#48
  00000044:  d29dddc7  mov x7, #0xeeee // #61166
  00000048:  f2bdddc7  movk x7, #0xeeee, lsl #16
  0000004c:  f2ddddc7  movk x7, #0xeeee, lsl #32
  00000050:  f2fdddc7  movk x7, #0xeeee, lsl torvalds#48
  [...]

Also, add a couple of test cases to make sure JITs pass
this test. Tested on Cavium ThunderX ARMv8. The added
test cases all pass after the fix.

Fixes: 8eee539 ("arm64: bpf: fix out-of-bounds read in bpf2a64_offset()")
Reported-by: David S. Miller <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Cc: Xi Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
bgly pushed a commit that referenced this pull request Aug 21, 2017
For all the entries allocated from the ring cmd area, the memory is
something like the stack memory, which will always reserve the old
data, so the entry->req.iov_bidi_cnt maybe none zero.

On some environments, the crash could be reproduce very easy and some
not. The following is the crash core trace as reported by Damien:

[  240.143969] CPU: 0 PID: 1285 Comm: iscsi_trx Not tainted 4.12.0-rc1+ #3
[  240.150607] Hardware name: ASUS All Series/H87-PRO, BIOS 2104 10/28/2014
[  240.157331] task: ffff8807de4f5800 task.stack: ffffc900047dc000
[  240.163270] RIP: 0010:memcpy_erms+0x6/0x10
[  240.167377] RSP: 0018:ffffc900047dfc68 EFLAGS: 00010202
[  240.172621] RAX: ffffc9065db85540 RBX: ffff8807f7980000 RCX: 0000000000000010
[  240.179771] RDX: 0000000000000010 RSI: ffff8807de574fe0 RDI: ffffc9065db85540
[  240.186930] RBP: ffffc900047dfd30 R08: ffff8807de41b000 R09: 0000000000000000
[  240.194088] R10: 0000000000000040 R11: ffff8807e9b726f0 R12: 00000006565726b0
[  240.201246] R13: ffffc90007612ea0 R14: 000000065657d540 R15: 0000000000000000
[  240.208397] FS:  0000000000000000(0000) GS:ffff88081fa00000(0000) knlGS:0000000000000000
[  240.216510] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  240.222280] CR2: ffffc9065db85540 CR3: 0000000001c0f000 CR4: 00000000001406f0
[  240.229430] Call Trace:
[  240.231887]  ? tcmu_queue_cmd+0x83c/0xa80
[  240.235916]  ? target_check_reservation+0xcd/0x6f0
[  240.240725]  __target_execute_cmd+0x27/0xa0
[  240.244918]  target_execute_cmd+0x232/0x2c0
[  240.249124]  ? __local_bh_enable_ip+0x64/0xa0
[  240.253499]  iscsit_execute_cmd+0x20d/0x270
[  240.257693]  iscsit_sequence_cmd+0x110/0x190
[  240.261985]  iscsit_get_rx_pdu+0x360/0xc80
[  240.267565]  ? iscsi_target_rx_thread+0x54/0xd0
[  240.273571]  iscsi_target_rx_thread+0x9a/0xd0
[  240.279413]  kthread+0x113/0x150
[  240.284120]  ? iscsi_target_tx_thread+0x1e0/0x1e0
[  240.290297]  ? kthread_create_on_node+0x40/0x40
[  240.296297]  ret_from_fork+0x2e/0x40
[  240.301332] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48
c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48
89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38
[  240.321751] RIP: memcpy_erms+0x6/0x10 RSP: ffffc900047dfc68
[  240.328838] CR2: ffffc9065db85540
[  240.333667] ---[ end trace b7e5354cfb54d08b ]---

To fix this, just memset all the entry memory before using it, and
also to be more readable we adjust the bidi code.

Fixed: fe25cc3(tcmu: Recalculate the tcmu_cmd size to save cmd area
		memories)
Reported-by: Bryant G. Ly <[email protected]>
Tested-by: Bryant G. Ly <[email protected]>
Reported-by: Damien Le Moal <[email protected]>
Tested-by: Damien Le Moal <[email protected]>
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: Xiubo Li <[email protected]>
Cc: <[email protected]> # 4.12+
Signed-off-by: Nicholas Bellinger <[email protected]>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

1 participant