kv.go

// Copyright 2015 PingCAP, Inc.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// See the License for the specific language governing permissions and
// limitations under the License.

package kv

import (
	"github.com/pingcap/tidb/store/tikv/oracle"
	"golang.org/x/net/context"
)

// Transaction options
const (
	// PresumeKeyNotExists indicates that when dealing with a Get operation but failing to read data from cache,
	// we presume that the key does not exist in Store. The actual existence will be checked before the
	// transaction's commit.
	// This option is an optimization for frequent checks during a transaction, e.g. batch inserts.
	PresumeKeyNotExists Option = iota + 1
	// PresumeKeyNotExistsError is the option key for error.
	// When PresumeKeyNotExists is set and condition is not match, should throw the error.
	PresumeKeyNotExistsError
	// BinlogInfo contains the binlog data and client.
	BinlogInfo
	// Skip existing check when "prewrite".
	SkipCheckForWrite
	// SchemaLeaseChecker is used for schema lease check.
	SchemaLeaseChecker
	// IsolationLevel sets isolation level for current transaction. The default level is SI.
	IsolationLevel
	// Priority marks the priority of this transaction.
	Priority
	// NotFillCache makes this request do not touch the LRU cache of the underlying storage.
	NotFillCache
	// SyncLog decides whether the WAL(write-ahead log) of this request should be synchronized.
	SyncLog
)

// Priority value for transaction priority.
const (
	PriorityNormal = iota
	PriorityLow
	PriorityHigh
)

// IsoLevel is the transaction's isolation level.
type IsoLevel int

const (
	// SI stands for 'snapshot isolation'.
	SI IsoLevel = iota
	// RC stands for 'read committed'.
	RC
)

// Those limits is enforced to make sure the transaction can be well handled by TiKV.
var (
	// TxnEntrySizeLimit is limit of single entry size (len(key) + len(value)).
	TxnEntrySizeLimit = 6 * 1024 * 1024
	// TxnEntryCountLimit  is limit of number of entries in the MemBuffer.
	TxnEntryCountLimit uint64 = 300 * 1000
	// TxnTotalSizeLimit is limit of the sum of all entry size.
	TxnTotalSizeLimit = 100 * 1024 * 1024
)

// Retriever is the interface wraps the basic Get and Seek methods.
type Retriever interface {
	// Get gets the value for key k from kv store.
	// If corresponding kv pair does not exist, it returns nil and ErrNotExist.
	Get(k Key) ([]byte, error)
	// Seek creates an Iterator positioned on the first entry that k <= entry's key.
	// If such entry is not found, it returns an invalid Iterator with no error.
	// The Iterator must be Closed after use.
	Seek(k Key) (Iterator, error)

	// SeekReverse creates a reversed Iterator positioned on the first entry which key is less than k.
	// The returned iterator will iterate from greater key to smaller key.
	// If k is nil, the returned iterator will be positioned at the last key.
	SeekReverse(k Key) (Iterator, error)
}

// Mutator is the interface wraps the basic Set and Delete methods.
type Mutator interface {
	// Set sets the value for key k as v into kv store.
	// v must NOT be nil or empty, otherwise it returns ErrCannotSetNilValue.
	Set(k Key, v []byte) error
	// Delete removes the entry for key k from kv store.
	Delete(k Key) error
}

// RetrieverMutator is the interface that groups Retriever and Mutator interfaces.
type RetrieverMutator interface {
	Retriever
	Mutator
}

// MemBuffer is an in-memory kv collection, can be used to buffer write operations.
type MemBuffer interface {
	RetrieverMutator
	// Size returns sum of keys and values length.
	Size() int
	// Len returns the number of entries in the DB.
	Len() int
	// Reset cleanup the MemBuffer
	Reset()
	// SetCap sets the MemBuffer capability, to reduce memory allocations.
	// Please call it before you use the MemBuffer, otherwise it will not works.
	SetCap(cap int)
}

// Transaction defines the interface for operations inside a Transaction.
// This is not thread safe.
type Transaction interface {
	MemBuffer
	// Commit commits the transaction operations to KV store.
	Commit(context.Context) error
	// Rollback undoes the transaction operations to KV store.
	Rollback() error
	// String implements fmt.Stringer interface.
	String() string
	// LockKeys tries to lock the entries with the keys in KV store.
	LockKeys(keys ...Key) error
	// SetOption sets an option with a value, when val is nil, uses the default
	// value of this option.
	SetOption(opt Option, val interface{})
	// DelOption deletes an option.
	DelOption(opt Option)
	// IsReadOnly checks if the transaction has only performed read operations.
	IsReadOnly() bool
	// StartTS returns the transaction start timestamp.
	StartTS() uint64
	// Valid returns if the transaction is valid.
	// A transaction become invalid after commit or rollback.
	Valid() bool
	// GetMemBuffer return the MemBuffer binding to this transaction.
	GetMemBuffer() MemBuffer
	// GetSnapshot returns the snapshot of this transaction.
	GetSnapshot() Snapshot
}

// Client is used to send request to KV layer.
type Client interface {
	// Send sends request to KV layer, returns a Response.
	Send(ctx context.Context, req *Request) Response

	// IsRequestTypeSupported checks if reqType and subType is supported.
	IsRequestTypeSupported(reqType, subType int64) bool
}

// ReqTypes.
const (
	ReqTypeSelect   = 101
	ReqTypeIndex    = 102
	ReqTypeDAG      = 103
	ReqTypeAnalyze  = 104
	ReqTypeChecksum = 105

	ReqSubTypeBasic      = 0
	ReqSubTypeDesc       = 10000
	ReqSubTypeGroupBy    = 10001
	ReqSubTypeTopN       = 10002
	ReqSubTypeSignature  = 10003
	ReqSubTypeAnalyzeIdx = 10004
	ReqSubTypeAnalyzeCol = 10005
)

// Request represents a kv request.
type Request struct {
	// Tp is the request type.
	Tp        int64
	StartTs   uint64
	Data      []byte
	KeyRanges []KeyRange
	// KeepOrder is true, if the response should be returned in order.
	KeepOrder bool
	// Desc is true, if the request is sent in descending order.
	Desc bool
	// Concurrency is 1, if it only sends the request to a single storage unit when
	// ResponseIterator.Next is called. If concurrency is greater than 1, the request will be
	// sent to multiple storage units concurrently.
	Concurrency int
	// IsolationLevel is the isolation level, default is SI.
	IsolationLevel IsoLevel
	// Priority is the priority of this KV request, its value may be PriorityNormal/PriorityLow/PriorityHigh.
	Priority int
	// NotFillCache makes this request do not touch the LRU cache of the underlying storage.
	NotFillCache bool
	// SyncLog decides whether the WAL(write-ahead log) of this request should be synchronized.
	SyncLog bool
	// Streaming indicates using streaming API for this request, result in that one Next()
	// call would not corresponds to a whole region result.
	Streaming bool
}

// ResultSubset represents a result subset from a single storage unit.
// TODO: Find a better interface for ResultSubset that can reuse bytes.
type ResultSubset interface {
	// GetData gets the data.
	GetData() []byte
	// GetStartKey gets the start key.
	GetStartKey() Key
}

// Response represents the response returned from KV layer.
type Response interface {
	// Next returns a resultSubset from a single storage unit.
	// When full result set is returned, nil is returned.
	Next(ctx context.Context) (resultSubset ResultSubset, err error)
	// Close response.
	Close() error
}

// Snapshot defines the interface for the snapshot fetched from KV store.
type Snapshot interface {
	Retriever
	// BatchGet gets a batch of values from snapshot.
	BatchGet(keys []Key) (map[string][]byte, error)
	// SetPriority snapshot set the priority
	SetPriority(priority int)
}

// Driver is the interface that must be implemented by a KV storage.
type Driver interface {
	// Open returns a new Storage.
	// The path is the string for storage specific format.
	Open(path string) (Storage, error)
}

// Storage defines the interface for storage.
// Isolation should be at least SI(SNAPSHOT ISOLATION)
type Storage interface {
	// Begin transaction
	Begin() (Transaction, error)
	// BeginWithStartTS begins transaction with startTS.
	BeginWithStartTS(startTS uint64) (Transaction, error)
	// GetSnapshot gets a snapshot that is able to read any data which data is <= ver.
	// if ver is MaxVersion or > current max committed version, we will use current version for this snapshot.
	GetSnapshot(ver Version) (Snapshot, error)
	// GetClient gets a client instance.
	GetClient() Client
	// Close store
	Close() error
	// UUID return a unique ID which represents a Storage.
	UUID() string
	// CurrentVersion returns current max committed version.
	CurrentVersion() (Version, error)
	// GetOracle gets a timestamp oracle client.
	GetOracle() oracle.Oracle
	// SupportDeleteRange gets the storage support delete range or not.
	SupportDeleteRange() (supported bool)
}

// FnKeyCmp is the function for iterator the keys
type FnKeyCmp func(key Key) bool

// Iterator is the interface for a iterator on KV store.
type Iterator interface {
	Valid() bool
	Key() Key
	Value() []byte
	Next() error
	Close()
}