From 85b3547546bf2da1c7b1d792dfee95bf5cbfb654 Mon Sep 17 00:00:00 2001 From: Daniel Axtens Date: Mon, 3 Jun 2019 16:56:57 +1000 Subject: [PATCH] powerpc/pseries/hvconsole: Fix stack overread via udbg [ Upstream commit 934bda59f286d0221f1a3ebab7f5156a996cc37d ] While developing KASAN for 64-bit book3s, I hit the following stack over-read. It occurs because the hypercall to put characters onto the terminal takes 2 longs (128 bits/16 bytes) of characters at a time, and so hvc_put_chars() would unconditionally copy 16 bytes from the argument buffer, regardless of supplied length. However, udbg_hvc_putc() can call hvc_put_chars() with a single-byte buffer, leading to the error. ================================================================== BUG: KASAN: stack-out-of-bounds in hvc_put_chars+0xdc/0x110 Read of size 8 at addr c0000000023e7a90 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-rc2-next-20190528-02824-g048a6ab4835b #113 Call Trace: dump_stack+0x104/0x154 (unreliable) print_address_description+0xa0/0x30c __kasan_report+0x20c/0x224 kasan_report+0x18/0x30 __asan_report_load8_noabort+0x24/0x40 hvc_put_chars+0xdc/0x110 hvterm_raw_put_chars+0x9c/0x110 udbg_hvc_putc+0x154/0x200 udbg_write+0xf0/0x240 console_unlock+0x868/0xd30 register_console+0x970/0xe90 register_early_udbg_console+0xf8/0x114 setup_arch+0x108/0x790 start_kernel+0x104/0x784 start_here_common+0x1c/0x534 Memory state around the buggy address: c0000000023e7980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0000000023e7a00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 >c0000000023e7a80: f1 f1 01 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 ^ c0000000023e7b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0000000023e7b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Document that a 16-byte buffer is requred, and provide it in udbg. Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman Signed-off-by: Sasha Levin --- arch/powerpc/platforms/pseries/hvconsole.c | 2 +- drivers/tty/hvc/hvc_vio.c | 16 +++++++++++++++- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c index 74da18de853af6..73ec15cd27080f 100644 --- a/arch/powerpc/platforms/pseries/hvconsole.c +++ b/arch/powerpc/platforms/pseries/hvconsole.c @@ -62,7 +62,7 @@ EXPORT_SYMBOL(hvc_get_chars); * @vtermno: The vtermno or unit_address of the adapter from which the data * originated. * @buf: The character buffer that contains the character data to send to - * firmware. + * firmware. Must be at least 16 bytes, even if count is less than 16. * @count: Send this number of characters. */ int hvc_put_chars(uint32_t vtermno, const char *buf, int count) diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c index 59eaa620bf13a0..80fd06fbd712a7 100644 --- a/drivers/tty/hvc/hvc_vio.c +++ b/drivers/tty/hvc/hvc_vio.c @@ -107,6 +107,14 @@ static int hvterm_raw_get_chars(uint32_t vtermno, char *buf, int count) return got; } +/** + * hvterm_raw_put_chars: send characters to firmware for given vterm adapter + * @vtermno: The virtual terminal number. + * @buf: The characters to send. Because of the underlying hypercall in + * hvc_put_chars(), this buffer must be at least 16 bytes long, even if + * you are sending fewer chars. + * @count: number of chars to send. + */ static int hvterm_raw_put_chars(uint32_t vtermno, const char *buf, int count) { struct hvterm_priv *pv = hvterm_privs[vtermno]; @@ -219,6 +227,7 @@ static const struct hv_ops hvterm_hvsi_ops = { static void udbg_hvc_putc(char c) { int count = -1; + unsigned char bounce_buffer[16]; if (!hvterm_privs[0]) return; @@ -229,7 +238,12 @@ static void udbg_hvc_putc(char c) do { switch(hvterm_privs[0]->proto) { case HV_PROTOCOL_RAW: - count = hvterm_raw_put_chars(0, &c, 1); + /* + * hvterm_raw_put_chars requires at least a 16-byte + * buffer, so go via the bounce buffer + */ + bounce_buffer[0] = c; + count = hvterm_raw_put_chars(0, bounce_buffer, 1); break; case HV_PROTOCOL_HVSI: count = hvterm_hvsi_put_chars(0, &c, 1);