Octave

A 3D Game Engine for GameCube, Wii, 3DS, Windows, Linux, and Android

Tutorial Video: https://youtu.be/0CHLn0ie-DY?si=pq-s_hLgb71OX2Cc Setup instructions below.

Windows Setup

1. Download and Install:
   • Visual Studio Community 2022 (with C++ support)
   • Vulkan SDK version 1.3.275.0 (During install select "Shader Toolchain Debug Symbols - 64 bit" and deselect all other options)
   • devkitPPC for GameCube/Wii development (Optional)
   • devkitARM for 3DS development (Optional)
2. Build shaders by running compile.bat in Engine/Shaders/GLSL
3. Open Octave.sln
4. Switch to the DebugEditor solution configuration
5. Set the Standalone project as the Startup Project
6. In the debug settings for Standalone, change the working directory to $(SolutionDir)
7. Build and run Standalone. This is the standalone level edtior if you were making a game with Lua script only.

Linux Setup

1. sudo apt install g++
2. sudo apt install make
3. sudo apt install libx11-dev
4. sudo apt install libasound2-dev
5. Install Vulkan SDK version 1.3.275.0
   • Download the 1.3.275.0 tar file from https://vulkan.lunarg.com/sdk/home#linux
   • Extract the tar file somewhere (e.g. ~/VulkanSDK/)
   • Add these to your ~/.bashrc file (replace ~/VulkanSDK with the directory where you extracted the files to)

     export VULKAN_SDK=~/VulkanSDK/1.3.275.0/x86_64
     export PATH=$VULKAN_SDK/bin:$PATH
     export LD_LIBRARY_PATH=$VULKAN_SDK/lib${LD_LIBRARY_PATH:+:$LD_LIBRARY_PATH}
     export VK_LAYER_PATH=$VULKAN_SDK/share/vulkan/explicit_layer.d
     

   • Close and reopen your terminal to apply the .bashrc (or run source ~/.bashrc)
6. Install devkitPro Pacman for GameCube/Wii/3DS development (Optional) (https://devkitpro.org/wiki/devkitPro_pacman)
   • wget https://apt.devkitpro.org/install-devkitpro-pacman
   • chmod +x ./install-devkitpro-pacman
   • sudo ./install-devkitpro-pacman
7. Install GameCube/Wii/3DS development libraries (Optional) (https://devkitpro.org/wiki/Getting_Started)
   • sudo dkp-pacman -S gamecube-dev
   • sudo dkp-pacman -S wii-dev
   • sudo dkp-pacman -S 3ds-dev
8. Run Engine/Shaders/GLSL/compile.sh

Linux Setup (Visual Studio Code)

9. Open the root octave folder in VsCode (where this README is located).
10. Install the C/C++ Extension Pack
11. Run the Octave Editor config (click the Run and Debug tab on the left, then in the drop down where the green Play button is, select Octave Editor)

Linux Setup (Terminal)

9. From the project's root directory (where this README is located) cd Standalone
10. Run make -f Makefile_Linux_Editor
11. Go back to the root directory cd ..
12. Run Standalone/Build/Linux/OctaveEditor.out It's important that the working directory is the root directory where the Engine and Standalone folders are located.

Packaging

1. For packing Windows, add your devenv.exe folder to your PATH. For instance: C:\Program Files\Microsoft Visual Studio\2022\Community\Common7\IDE
2. For packaging GameCube, Wii, or 3DS, add your devkitPro tools folder to your PATH. For instance: C:\devkitPro\tools\bin
3. For packaing Android... TODO (I'm currently using Android Studio 2022.2.1 Patch 2)