Raised buttons for the Ploopy Adept
My tiny hands struggle to reach the furthest 3 buttons from my natural resting position on the ploopy.
To solve this I created 3 raised buttons that are 3d-printable to be glued on top of the original ploopy case to raise the buttons into reach.
-
Download the .stl file and import it into your favourite slicer.
-
If you're right handed, flip the model
-
Because of the slight "lip" around the button to make it slot into the existing buttons, I recommend cutting the print in two, and gluing it after the print is done with superglue.
I cut at 2mm, placing both pieces on the flat cut side:
Looks like this:
-
Because of the curves, I print at 0.15mm layer height. But this is up to your. Print!
-
Glue together each of the cut pieces
-
Dry fit to make sure it looks good. I recommend testing if it works for you by either just resting them on the buttons for a few days, or doing a thin piece of double sided tape. If you're happy with it like me, superglue them in place!
