example_ftc532.yml

# Teekar Curtain Switch
# GPIO  inv?    Copomponent
# 0     yes     LED Up Blue
# 1     yes     LED Down Blue
# 2     yes     LED Pause Red
# 3             ???
# 4     yes     LED Up Green
# 5             Relay Down
# 12            ???
# 13    yes     LED Pause Green
# 14            Buttons (with some digital protocol)
#               https://github.com/arendst/Tasmota/discussions/10185
# 15            Relay Up
# 16    yes     LED Pause Blue


esphome:
  name: shutter
  platform: ESP8266
  board: esp01_1m
  on_boot:
    then:
      - output.turn_off: pause_green

external_components:
  - source: github://jplitza/esphome_components

ota:
  # recommended because flashing fails when using the ftc532 component, and this
  # way you don't have to try as many times
  num_attempts: 3

ftc532:
  pin: GPIO14

binary_sensor:
  - id: down_button
    platform: ftc532
    channel: 0
    on_press:
      then:
        - cover.close: cover1
  - id: stop_button
    platform: ftc532
    channel: 1
    on_press:
      then:
        - cover.stop: cover1
  - id: up_button
    platform: ftc532
    channel: 2
    on_press:
      then:
        - cover.open: cover1

output:
  - platform: gpio
    pin: GPIO0
    inverted: True
    id: up_blue
  - platform: gpio
    pin: GPIO1
    inverted: True
    id: down_blue
  - platform: gpio
    pin: GPIO2
    inverted: True
    id: pause_red
  - platform: gpio
    pin: GPIO4
    inverted: True
    id: up_green
  - platform: gpio
    pin: GPIO13
    inverted: True
    id: pause_green

status_led:
  id: pause_blue
  pin:
    number: GPIO16
    inverted: True

switch:
  - platform: gpio
    pin: GPIO15
    id: down
    restore_mode: ALWAYS_OFF
    interlock: [up]
    interlock_wait_time: 0.5s
  - platform: gpio
    pin: GPIO5
    id: up
    restore_mode: ALWAYS_OFF
    interlock: [down]
    interlock_wait_time: 0.5s

cover:
  - platform: time_based
    name: 'Curtain'
    id: cover1
    device_class: blind

    open_action:
      - switch.turn_off: down
      - switch.turn_on: up
    open_duration: 32s

    close_action:
      - switch.turn_off: up
      - switch.turn_on: down
    close_duration: 30s

    stop_action:
      - switch.turn_off: up
      - switch.turn_off: down