libcoro C++20 coroutine library

libcoro is licensed under the Apache 2.0 license.

libcoro is meant to provide low level coroutine constructs for building larger applications, the current focus is around high performance networking coroutine support.

Overview

C++20 coroutines!
Modern Safe C++20 API
Higher level coroutine constructs
Schedulers
- coro::thread_pool for coroutine cooperative multitasking
- coro::io_scheduler for driving i/o events
  - Can use coro::thread_pool for latency sensitive or long lived tasks.
  - Can use inline task processing for thread per core or short lived tasks.
  - Currently uses an epoll driver, only supported on linux.
- coro::task_container for dynamic task lifetimes
Coroutine Networking
- coro::net::dns::resolver for async dns
  - Uses libc-ares
- coro::net::tcp::client
- coro::net::tcp::server
  - Example TCP/HTTP Echo Server
- coro::net::tls::client (OpenSSL)
- coro::net::tls::server (OpenSSL)
- coro::net::udp::peer
Requirements
Build Instructions
Contributing
Support

Usage

A note on co_await and threads

Its important to note with coroutines that any co_await has the potential to switch the underyling thread that is executing the currently executing coroutine if the scheduler used has more than 1 thread. In general this shouldn't affect the way any user of the library would write code except for thread_local. Usage of thread_local should be extremely careful and never used across any co_await boundary do to thread switching and work stealing on libcoro's schedulers. The only way this is safe is by using a coro::thread_pool with 1 thread or an inline io_scheduler which also only has 1 thread.

sync_wait

The sync_wait construct is meant to be used outside of a coroutine context to block the calling thread until the coroutine has completed. The coroutine can be executed on the calling thread or scheduled on one of libcoro's schedulers.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    // This lambda will create a coro::task that returns a unit64_t.
    // It can be invoked many times with different arguments.
    auto make_task_inline = [](uint64_t x) -> coro::task<uint64_t> { co_return x + x; };

    // This will block the calling thread until the created task completes.
    // Since this task isn't scheduled on any coro::thread_pool or coro::io_scheduler
    // it will execute directly on the calling thread.
    auto result = coro::sync_wait(make_task_inline(5));
    std::cout << "Inline Result = " << result << "\n";

    // We'll make a 1 thread coro::thread_pool to demonstrate offloading the task's
    // execution to another thread.  We'll capture the thread pool in the lambda,
    // note that you will need to guarantee the thread pool outlives the coroutine.
    coro::thread_pool tp{coro::thread_pool::options{.thread_count = 1}};

    auto make_task_offload = [&tp](uint64_t x) -> coro::task<uint64_t>
    {
        co_await tp.schedule(); // Schedules execution on the thread pool.
        co_return x + x;        // This will execute on the thread pool.
    };

    // This will still block the calling thread, but it will now offload to the
    // coro::thread_pool since the coroutine task is immediately scheduled.
    result = coro::sync_wait(make_task_offload(10));
    std::cout << "Offload Result = " << result << "\n";
}

Expected output:

$ ./examples/coro_sync_wait 
Inline Result = 10
Offload Result = 20

when_all

The when_all construct can be used within coroutines to await a set of tasks, or it can be used outside coroutinne context in conjunction with sync_wait to await multiple tasks. Each task passed into when_all will initially be executed serially by the calling thread so it is recommended to offload the tasks onto a scheduler like coro::thread_pool or coro::io_scheduler so they can execute in parallel.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    // Create a thread pool to execute all the tasks in parallel.
    coro::thread_pool tp{coro::thread_pool::options{.thread_count = 4}};
    // Create the task we want to invoke multiple times and execute in parallel on the thread pool.
    auto twice = [&](uint64_t x) -> coro::task<uint64_t>
    {
        co_await tp.schedule(); // Schedule onto the thread pool.
        co_return x + x;        // Executed on the thread pool.
    };

    // Make our tasks to execute, tasks can be passed in via a std::ranges::range type or var args.
    std::vector<coro::task<uint64_t>> tasks{};
    for (std::size_t i = 0; i < 5; ++i)
    {
        tasks.emplace_back(twice(i + 1));
    }

    // Synchronously wait on this thread for the thread pool to finish executing all the tasks in parallel.
    auto results = coro::sync_wait(coro::when_all(std::move(tasks)));
    for (auto& result : results)
    {
        // If your task can throw calling return_value() will either return the result or re-throw the exception.
        try
        {
            std::cout << result.return_value() << "\n";
        }
        catch (const std::exception& e)
        {
            std::cerr << e.what() << '\n';
        }
    }

    // Use var args instead of a container as input to coro::when_all.
    auto square = [&](double x) -> coro::task<double>
    {
        co_await tp.schedule();
        co_return x* x;
    };

    // Var args allows you to pass in tasks with different return types and returns
    // the result as a std::tuple.
    auto tuple_results = coro::sync_wait(coro::when_all(square(1.1), twice(10)));

    auto first  = std::get<0>(tuple_results).return_value();
    auto second = std::get<1>(tuple_results).return_value();

    std::cout << "first: " << first << " second: " << second << "\n";
}

Expected output:

$ ./examples/coro_when_all 
2
4
6
8
10
first: 1.21 second: 20

task

The coro::task<T> is the main coroutine building block within libcoro. Use task to create your coroutines and co_await or co_yield tasks within tasks to perform asynchronous operations, lazily evaluation or even spreading work out across a coro::thread_pool. Tasks are lightweight and only begin execution upon awaiting them.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    // Task that takes a value and doubles it.
    auto double_task = [](uint64_t x) -> coro::task<uint64_t> { co_return x * 2; };

    // Create a task that awaits the doubling of its given value and
    // then returns the result after adding 5.
    auto double_and_add_5_task = [&](uint64_t input) -> coro::task<uint64_t>
    {
        auto doubled = co_await double_task(input);
        co_return doubled + 5;
    };

    auto output = coro::sync_wait(double_and_add_5_task(2));
    std::cout << "Task1 output = " << output << "\n";

    struct expensive_struct
    {
        std::string              id{};
        std::vector<std::string> records{};

        expensive_struct()  = default;
        ~expensive_struct() = default;

        // Explicitly delete copy constructor and copy assign, force only moves!
        // While the default move constructors will work for this struct the example
        // inserts explicit print statements to show the task is moving the value
        // out correctly.
        expensive_struct(const expensive_struct&)                    = delete;
        auto operator=(const expensive_struct&) -> expensive_struct& = delete;

        expensive_struct(expensive_struct&& other) : id(std::move(other.id)), records(std::move(other.records))
        {
            std::cout << "expensive_struct() move constructor called\n";
        }
        auto operator=(expensive_struct&& other) -> expensive_struct&
        {
            if (std::addressof(other) != this)
            {
                id      = std::move(other.id);
                records = std::move(other.records);
            }
            std::cout << "expensive_struct() move assignment called\n";
            return *this;
        }
    };

    // Create a very large object and return it by moving the value so the
    // contents do not have to be copied out.
    auto move_output_task = []() -> coro::task<expensive_struct>
    {
        expensive_struct data{};
        data.id = "12345678-1234-5678-9012-123456781234";
        for (size_t i = 10'000; i < 100'000; ++i)
        {
            data.records.emplace_back(std::to_string(i));
        }

        // Because the struct only has move contructors it will be forced to use
        // them, no need to explicitly std::move(data).
        co_return data;
    };

    auto data = coro::sync_wait(move_output_task());
    std::cout << data.id << " has " << data.records.size() << " records.\n";

    // std::unique_ptr<T> can also be used to return a larger object.
    auto unique_ptr_task = []() -> coro::task<std::unique_ptr<uint64_t>> { co_return std::make_unique<uint64_t>(42); };

    auto answer_to_everything = coro::sync_wait(unique_ptr_task());
    if (answer_to_everything != nullptr)
    {
        std::cout << "Answer to everything = " << *answer_to_everything << "\n";
    }
}

Expected output:

$ ./examples/coro_task
Task1 output = 9
expensive_struct() move constructor called
expensive_struct() move assignment called
expensive_struct() move constructor called
12345678-1234-5678-9012-123456781234 has 90000 records.
Answer to everything = 42

generator

The coro::generator<T> construct is a coroutine which can generate one or more values.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    auto task = [](uint64_t count_to) -> coro::task<void>
    {
        // Create a generator function that will yield and incrementing
        // number each time its called.
        auto gen = []() -> coro::generator<uint64_t>
        {
            uint64_t i = 0;
            while (true)
            {
                co_yield i;
                ++i;
            }
        };

        // Generate the next number until its greater than count to.
        for (auto val : gen())
        {
            std::cout << val << ", ";

            if (val >= count_to)
            {
                break;
            }
        }
        co_return;
    };

    coro::sync_wait(task(100));
}

Expected output:

$ ./examples/coro_generator
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100,

event

The coro::event is a thread safe async tool to have 1 or more waiters suspend for an event to be set before proceeding. The implementation of event currently will resume execution of all waiters on the thread that sets the event. If the event is already set when a waiter goes to wait on the thread they will simply continue executing with no suspend or wait time incurred.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    coro::event e;

    // These tasks will wait until the given event has been set before advancing.
    auto make_wait_task = [](const coro::event& e, uint64_t i) -> coro::task<void> {
        std::cout << "task " << i << " is waiting on the event...\n";
        co_await e;
        std::cout << "task " << i << " event triggered, now resuming.\n";
        co_return;
    };

    // This task will trigger the event allowing all waiting tasks to proceed.
    auto make_set_task = [](coro::event& e) -> coro::task<void> {
        std::cout << "set task is triggering the event\n";
        e.set();
        co_return;
    };

    // Given more than a single task to synchronously wait on, use when_all() to execute all the
    // tasks concurrently on this thread and then sync_wait() for them all to complete.
    coro::sync_wait(coro::when_all(make_wait_task(e, 1), make_wait_task(e, 2), make_wait_task(e, 3), make_set_task(e)));
}

Expected output:

$ ./examples/coro_event
task 1 is waiting on the event...
task 2 is waiting on the event...
task 3 is waiting on the event...
set task is triggering the event
task 3 event triggered, now resuming.
task 2 event triggered, now resuming.
task 1 event triggered, now resuming.

latch

The coro::latch is a thread safe async tool to have 1 waiter suspend until all outstanding events have completed before proceeding.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    // Complete worker tasks faster on a thread pool, using the io_scheduler version so the worker
    // tasks can yield for a specific amount of time to mimic difficult work.  The pool is only
    // setup with a single thread to showcase yield_for().
    auto tp = coro::io_scheduler::make_shared(
        coro::io_scheduler::options{.pool = coro::thread_pool::options{.thread_count = 1}});

    // This task will wait until the given latch setters have completed.
    auto make_latch_task = [](coro::latch& l) -> coro::task<void>
    {
        // It seems like the dependent worker tasks could be created here, but in that case it would
        // be superior to simply do: `co_await coro::when_all(tasks);`
        // It is also important to note that the last dependent task will resume the waiting latch
        // task prior to actually completing -- thus the dependent task's frame could be destroyed
        // by the latch task completing before it gets a chance to finish after calling resume() on
        // the latch task!

        std::cout << "latch task is now waiting on all children tasks...\n";
        co_await l;
        std::cout << "latch task dependency tasks completed, resuming.\n";
        co_return;
    };

    // This task does 'work' and counts down on the latch when completed.  The final child task to
    // complete will end up resuming the latch task when the latch's count reaches zero.
    auto make_worker_task = [](std::shared_ptr<coro::io_scheduler>& tp, coro::latch& l, int64_t i) -> coro::task<void>
    {
        // Schedule the worker task onto the thread pool.
        co_await tp->schedule();
        std::cout << "worker task " << i << " is working...\n";
        // Do some expensive calculations, yield to mimic work...!  Its also important to never use
        // std::this_thread::sleep_for() within the context of coroutines, it will block the thread
        // and other tasks that are ready to execute will be blocked.
        co_await tp->yield_for(std::chrono::milliseconds{i * 20});
        std::cout << "worker task " << i << " is done, counting down on the latch\n";
        l.count_down();
        co_return;
    };

    const int64_t                 num_tasks{5};
    coro::latch                   l{num_tasks};
    std::vector<coro::task<void>> tasks{};

    // Make the latch task first so it correctly waits for all worker tasks to count down.
    tasks.emplace_back(make_latch_task(l));
    for (int64_t i = 1; i <= num_tasks; ++i)
    {
        tasks.emplace_back(make_worker_task(tp, l, i));
    }

    // Wait for all tasks to complete.
    coro::sync_wait(coro::when_all(std::move(tasks)));
}

Expected output:

$ ./examples/coro_latch
latch task is now waiting on all children tasks...
worker task 1 is working...
worker task 2 is working...
worker task 3 is working...
worker task 4 is working...
worker task 5 is working...
worker task 1 is done, counting down on the latch
worker task 2 is done, counting down on the latch
worker task 3 is done, counting down on the latch
worker task 4 is done, counting down on the latch
worker task 5 is done, counting down on the latch
latch task dependency tasks completed, resuming.

mutex

The coro::mutex is a thread safe async tool to protect critical sections and only allow a single thread to execute the critical section at any given time. Mutexes that are uncontended are a simple CAS operation with a memory fence 'acquire' to behave similar to std::mutex. If the lock is contended then the thread will add itself to a LIFO queue of waiters and yield excution to allow another coroutine to process on that thread while it waits to acquire the lock.

Its important to note that upon releasing the mutex that thread unlocking the mutex will immediately start processing the next waiter in line for the coro::mutex (if there are any waiters), the mutex is only unlocked/released once all waiters have been processed. This guarantees fair execution in a reasonbly FIFO manner, but it also means all coroutines that stack in the waiter queue will end up shifting to the single thread that is executing all waiting coroutines. It is possible to manually reschedule after the critical section onto a thread pool to re-distribute the work if this is a concern in your use case.

The suspend waiter queue is LIFO, however the worker that current holds the mutex will periodically 'acquire' the current LIFO waiter list to process those waiters when its internal list becomes empty. This effectively resets the suspended waiter list to empty and the worker holding the mutex will work through the newly acquired LIFO queue of waiters. It would be possible to reverse this list to be as fair as possible, however not reversing the list should result is better throughput at possibly the cost of some latency for the first suspended waiters on the 'current' LIFO queue. Reversing the list, however, would introduce latency for all queue waiters since its done everytime the LIFO queue is swapped.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    coro::thread_pool     tp{coro::thread_pool::options{.thread_count = 4}};
    std::vector<uint64_t> output{};
    coro::mutex           mutex;

    auto make_critical_section_task = [&](uint64_t i) -> coro::task<void> {
        co_await tp.schedule();
        // To acquire a mutex lock co_await its lock() function.  Upon acquiring the lock the
        // lock() function returns a coro::scoped_lock that holds the mutex and automatically
        // unlocks the mutex upon destruction.  This behaves just like std::scoped_lock.
        {
            auto scoped_lock = co_await mutex.lock();
            output.emplace_back(i);
        } // <-- scoped lock unlocks the mutex here.
        co_return;
    };

    const size_t                  num_tasks{100};
    std::vector<coro::task<void>> tasks{};
    tasks.reserve(num_tasks);
    for (size_t i = 1; i <= num_tasks; ++i)
    {
        tasks.emplace_back(make_critical_section_task(i));
    }

    coro::sync_wait(coro::when_all(std::move(tasks)));

    // The output will be variable per run depending on how the tasks are picked up on the
    // thread pool workers.
    for (const auto& value : output)
    {
        std::cout << value << ", ";
    }
}

Expected output, note that the output will vary from run to run based on how the thread pool workers are scheduled and in what order they acquire the mutex lock:

$ ./examples/coro_mutex
1, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 37, 36, 35, 40, 39, 38, 41, 42, 43, 44, 46, 47, 48, 45, 49, 50, 51, 52, 53, 54, 55, 57, 56, 59, 58, 61, 60, 62, 63, 65, 64, 67, 66, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 83, 82, 84, 85, 86, 87, 88, 89, 91, 90, 92, 93, 94, 95, 96, 97, 98, 99, 100,

Its very easy to see the LIFO 'atomic' queue in action in the beginning where 22->2 are immediately suspended waiting to acquire the mutex.

shared_mutex

The coro::shared_mutex is a thread safe async tool to allow for multiple shared users at once but also exclusive access. The lock is acquired strictly in a FIFO manner in that if the lock is currenty held by shared users and an exclusive attempts to lock, the exclusive waiter will suspend until all the current shared users finish using the lock. Any new users that attempt to lock the mutex in a shared state once there is an exclusive waiter will also wait behind the exclusive waiter. This prevents the exclusive waiter from being starved.

The coro::shared_mutex requires a executor_type when constructed to be able to resume multiple shared waiters when an exclusive lock is released. This allows for all of the pending shared waiters to be resumed concurrently.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    // Shared mutexes require an excutor type to be able to wake up multiple shared waiters when
    // there is an exclusive lock holder releasing the lock.  This example uses a single thread
    // to also show the interleaving of coroutines acquiring the shared lock in shared and
    // exclusive mode as they resume and suspend in a linear manner.  Ideally the thread pool
    // executor would have more than 1 thread to resume all shared waiters in parallel.
    auto               tp = std::make_shared<coro::thread_pool>(coro::thread_pool::options{.thread_count = 1});
    coro::shared_mutex mutex{tp};

    auto make_shared_task = [&](uint64_t i) -> coro::task<void> {
        co_await tp->schedule();
        {
            std::cerr << "shared task " << i << " lock_shared()\n";
            auto scoped_lock = co_await mutex.lock_shared();
            std::cerr << "shared task " << i << " lock_shared() acquired\n";
            /// Immediately yield so the other shared tasks also acquire in shared state
            /// while this task currently holds the mutex in shared state.
            co_await tp->yield();
            std::cerr << "shared task " << i << " unlock_shared()\n";
        }
        co_return;
    };

    auto make_exclusive_task = [&]() -> coro::task<void> {
        co_await tp->schedule();

        std::cerr << "exclusive task lock()\n";
        auto scoped_lock = co_await mutex.lock();
        std::cerr << "exclusive task lock() acquired\n";
        // Do the exclusive work..
        std::cerr << "exclusive task unlock()\n";
        co_return;
    };

    // Create 3 shared tasks that will acquire the mutex in a shared state.
    const size_t                  num_tasks{3};
    std::vector<coro::task<void>> tasks{};
    for (size_t i = 1; i <= num_tasks; ++i)
    {
        tasks.emplace_back(make_shared_task(i));
    }
    // Create an exclusive task.
    tasks.emplace_back(make_exclusive_task());
    // Create 3 more shared tasks that will be blocked until the exclusive task completes.
    for (size_t i = num_tasks + 1; i <= num_tasks * 2; ++i)
    {
        tasks.emplace_back(make_shared_task(i));
    }

    coro::sync_wait(coro::when_all(std::move(tasks)));
}

Example output, notice how the (4,5,6) shared tasks attempt to acquire the lock in a shared state but are blocked behind the exclusive waiter until it completes:

$ ./examples/coro_shared_mutex
shared task 1 lock_shared()
shared task 1 lock_shared() acquired
shared task 2 lock_shared()
shared task 2 lock_shared() acquired
shared task 3 lock_shared()
shared task 3 lock_shared() acquired
exclusive task lock()
shared task 4 lock_shared()
shared task 5 lock_shared()
shared task 6 lock_shared()
shared task 1 unlock_shared()
shared task 2 unlock_shared()
shared task 3 unlock_shared()
exclusive task lock() acquired
exclusive task unlock()
shared task 4 lock_shared() acquired
shared task 5 lock_shared() acquired
shared task 6 lock_shared() acquired
shared task 4 unlock_shared()
shared task 5 unlock_shared()
shared task 6 unlock_shared()

semaphore

The coro::semaphore is a thread safe async tool to protect a limited number of resources by only allowing so many consumers to acquire the resources a single time. The coro::semaphore also has a maximum number of resources denoted by its constructor. This means if a resource is produced or released when the semaphore is at its maximum resource availability then the release operation will await for space to become available. This is useful for a ringbuffer type situation where the resources are produced and then consumed, but will have no effect on a semaphores usage if there is a set known quantity of resources to start with and are acquired and then released back.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    // Have more threads/tasks than the semaphore will allow for at any given point in time.
    coro::thread_pool tp{coro::thread_pool::options{.thread_count = 8}};
    coro::semaphore   semaphore{2};

    auto make_rate_limited_task = [&](uint64_t task_num) -> coro::task<void>
    {
        co_await tp.schedule();

        // This will only allow 2 tasks through at any given point in time, all other tasks will
        // await the resource to be available before proceeding.
        auto result = co_await semaphore.acquire();
        if (result == coro::semaphore::acquire_result::acquired)
        {
            std::cout << task_num << ", ";
            semaphore.release();
        }
        else
        {
            std::cout << task_num << " failed to acquire semaphore [" << coro::semaphore::to_string(result) << "],";
        }
        co_return;
    };

    const size_t                  num_tasks{100};
    std::vector<coro::task<void>> tasks{};
    for (size_t i = 1; i <= num_tasks; ++i)
    {
        tasks.emplace_back(make_rate_limited_task(i));
    }

    coro::sync_wait(coro::when_all(std::move(tasks)));
}

Expected output, note that there is no lock around the std::cout so some of the output isn't perfect.

$ ./examples/coro_semaphore
1, 23, 25, 24, 22, 27, 28, 29, 21, 20, 19, 18, 17, 14, 31, 30, 33, 32, 41, 40, 37, 39, 38, 36, 35, 34, 43, 46, 47, 48, 45, 42, 44, 26, 16, 15, 13, 52, 54, 55, 53, 49, 51, 57, 58, 50, 62, 63, 61, 60, 59, 56, 12, 11, 8, 10, 9, 7, 6, 5, 4, 3, 642, , 66, 67, 6568, , 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100,

ring_buffer

The coro::ring_buffer<element, num_elements> is thread safe async multi-producer multi-consumer statically sized ring buffer. Producers that try to produce a value when the ring buffer is full will suspend until space is available. Consumers that try to consume a value when the ring buffer is empty will suspend until space is available. All waiters on the ring buffer for producing or consuming are resumed in a LIFO manner when their respective operation becomes available.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    const size_t                    iterations = 100;
    const size_t                    consumers  = 4;
    coro::thread_pool               tp{coro::thread_pool::options{.thread_count = 4}};
    coro::ring_buffer<uint64_t, 16> rb{};
    coro::mutex                     m{};

    std::vector<coro::task<void>> tasks{};

    auto make_producer_task = [&]() -> coro::task<void>
    {
        co_await tp.schedule();

        for (size_t i = 1; i <= iterations; ++i)
        {
            co_await rb.produce(i);
        }

        // Wait for the ring buffer to clear all items so its a clean stop.
        while (!rb.empty())
        {
            co_await tp.yield();
        }

        // Now that the ring buffer is empty signal to all the consumers its time to stop.  Note that
        // the stop signal works on producers as well, but this example only uses 1 producer.
        {
            auto scoped_lock = co_await m.lock();
            std::cerr << "\nproducer is sending stop signal";
        }
        rb.notify_waiters();
        co_return;
    };

    auto make_consumer_task = [&](size_t id) -> coro::task<void>
    {
        co_await tp.schedule();

        while (true)
        {
            auto expected    = co_await rb.consume();
            auto scoped_lock = co_await m.lock(); // just for synchronizing std::cout/cerr
            if (!expected)
            {
                std::cerr << "\nconsumer " << id << " shutting down, stop signal received";
                break; // while
            }
            else
            {
                auto item = std::move(*expected);
                std::cout << "(id=" << id << ", v=" << item << "), ";
            }

            // Mimic doing some work on the consumed value.
            co_await tp.yield();
        }

        co_return;
    };

    // Create N consumers
    for (size_t i = 0; i < consumers; ++i)
    {
        tasks.emplace_back(make_consumer_task(i));
    }
    // Create 1 producer.
    tasks.emplace_back(make_producer_task());

    // Wait for all the values to be produced and consumed through the ring buffer.
    coro::sync_wait(coro::when_all(std::move(tasks)));
}

Expected output:

$ ./examples/coro_ring_buffer
(id=3, v=1), (id=2, v=2), (id=1, v=3), (id=0, v=4), (id=3, v=5), (id=2, v=6), (id=1, v=7), (id=0, v=8), (id=3, v=9), (id=2, v=10), (id=1, v=11), (id=0, v=12), (id=3, v=13), (id=2, v=14), (id=1, v=15), (id=0, v=16), (id=3, v=17), (id=2, v=18), (id=1, v=19), (id=0, v=20), (id=3, v=21), (id=2, v=22), (id=1, v=23), (id=0, v=24), (id=3, v=25), (id=2, v=26), (id=1, v=27), (id=0, v=28), (id=3, v=29), (id=2, v=30), (id=1, v=31), (id=0, v=32), (id=3, v=33), (id=2, v=34), (id=1, v=35), (id=0, v=36), (id=3, v=37), (id=2, v=38), (id=1, v=39), (id=0, v=40), (id=3, v=41), (id=2, v=42), (id=0, v=44), (id=1, v=43), (id=3, v=45), (id=2, v=46), (id=0, v=47), (id=3, v=48), (id=2, v=49), (id=0, v=50), (id=3, v=51), (id=2, v=52), (id=0, v=53), (id=3, v=54), (id=2, v=55), (id=0, v=56), (id=3, v=57), (id=2, v=58), (id=0, v=59), (id=3, v=60), (id=1, v=61), (id=2, v=62), (id=0, v=63), (id=3, v=64), (id=1, v=65), (id=2, v=66), (id=0, v=67), (id=3, v=68), (id=1, v=69), (id=2, v=70), (id=0, v=71), (id=3, v=72), (id=1, v=73), (id=2, v=74), (id=0, v=75), (id=3, v=76), (id=1, v=77), (id=2, v=78), (id=0, v=79), (id=3, v=80), (id=2, v=81), (id=1, v=82), (id=0, v=83), (id=3, v=84), (id=2, v=85), (id=1, v=86), (id=0, v=87), (id=3, v=88), (id=2, v=89), (id=1, v=90), (id=0, v=91), (id=3, v=92), (id=2, v=93), (id=1, v=94), (id=0, v=95), (id=3, v=96), (id=2, v=97), (id=1, v=98), (id=0, v=99), (id=3, v=100),
producer is sending stop signal
consumer 0 shutting down, stop signal received
consumer 1 shutting down, stop signal received
consumer 2 shutting down, stop signal received
consumer 3 shutting down, stop signal received

thread_pool

coro::thread_pool is a statically sized pool of worker threads to execute scheduled coroutines from a FIFO queue. To schedule a coroutine on a thread pool the pool's schedule() function should be co_awaited to transfer the execution from the current thread to a thread pool worker thread. Its important to note that scheduling will first place the coroutine into the FIFO queue and will be picked up by the first available thread in the pool, e.g. there could be a delay if there is a lot of work queued up.

#include <coro/coro.hpp>
#include <iostream>
#include <random>

int main()
{
    coro::thread_pool tp{coro::thread_pool::options{
        // By default all thread pools will create its thread count with the
        // std::thread::hardware_concurrency() as the number of worker threads in the pool,
        // but this can be changed via this thread_count option.  This example will use 4.
        .thread_count = 4,
        // Upon starting each worker thread an optional lambda callback with the worker's
        // index can be called to make thread changes, perhaps priority or change the thread's
        // name.
        .on_thread_start_functor = [](std::size_t worker_idx) -> void {
            std::cout << "thread pool worker " << worker_idx << " is starting up.\n";
        },
        // Upon stopping each worker thread an optional lambda callback with the worker's
        // index can b called.
        .on_thread_stop_functor = [](std::size_t worker_idx) -> void {
            std::cout << "thread pool worker " << worker_idx << " is shutting down.\n";
        }}};

    auto offload_task = [&](uint64_t child_idx) -> coro::task<uint64_t> {
        // Start by scheduling this offload worker task onto the thread pool.
        co_await tp.schedule();
        // Now any code below this schedule() line will be executed on one of the thread pools
        // worker threads.

        // Mimic some expensive task that should be run on a background thread...
        std::random_device              rd;
        std::mt19937                    gen{rd()};
        std::uniform_int_distribution<> d{0, 1};

        size_t calculation{0};
        for (size_t i = 0; i < 1'000'000; ++i)
        {
            calculation += d(gen);

            // Lets be nice and yield() to let other coroutines on the thread pool have some cpu
            // time.  This isn't necessary but is illustrated to show how tasks can cooperatively
            // yield control at certain points of execution.  Its important to never call the
            // std::this_thread::sleep_for() within the context of a coroutine, that will block
            // and other coroutines which are ready for execution from starting, always use yield()
            // or within the context of a coro::io_scheduler you can use yield_for(amount).
            if (i == 500'000)
            {
                std::cout << "Task " << child_idx << " is yielding()\n";
                co_await tp.yield();
            }
        }
        co_return calculation;
    };

    auto primary_task = [&]() -> coro::task<uint64_t> {
        const size_t                      num_children{10};
        std::vector<coro::task<uint64_t>> child_tasks{};
        child_tasks.reserve(num_children);
        for (size_t i = 0; i < num_children; ++i)
        {
            child_tasks.emplace_back(offload_task(i));
        }

        // Wait for the thread pool workers to process all child tasks.
        auto results = co_await coro::when_all(std::move(child_tasks));

        // Sum up the results of the completed child tasks.
        size_t calculation{0};
        for (const auto& task : results)
        {
            calculation += task.return_value();
        }
        co_return calculation;
    };

    auto result = coro::sync_wait(primary_task());
    std::cout << "calculated thread pool result = " << result << "\n";
}

Example output (will vary based on threads):

$ ./examples/coro_thread_pool
thread pool worker 0 is starting up.
thread pool worker 2 is starting up.
thread pool worker 3 is starting up.
thread pool worker 1 is starting up.
Task 2 is yielding()
Task 3 is yielding()
Task 0 is yielding()
Task 1 is yielding()
Task 4 is yielding()
Task 5 is yielding()
Task 6 is yielding()
Task 7 is yielding()
Task 8 is yielding()
Task 9 is yielding()
calculated thread pool result = 4999898
thread pool worker 1 is shutting down.
thread pool worker 2 is shutting down.
thread pool worker 3 is shutting down.
thread pool worker 0 is shutting down.

io_scheduler

coro::io_scheduler is a i/o event scheduler that can use two methods of task processing:

A background coro::thread_pool
Inline task processing on the coro::io_scheduler's event loop

Using a background coro::thread_pool will default to using (std::thread::hardware_concurrency() - 1) threads to process tasks. This processing strategy is best for longer tasks that would block the i/o scheduler or for tasks that are latency sensitive.

Using the inline processing strategy will have the event loop i/o thread process the tasks inline on that thread when events are received. This processing strategy is best for shorter task that will not block the i/o thread for long or for pure throughput by using thread per core architecture, e.g. spin up an inline i/o scheduler per core and inline process tasks on each scheduler.

The coro::io_scheduler can use a dedicated spawned thread for processing events that are ready or it can be maually driven via its process_events() function for integration into existing event loops. By default i/o schedulers will spawn a dedicated event thread and use a thread pool to process tasks.

Before getting to an example there are two methods of scheduling work onto an i/o scheduler, the first is by having the caller maintain the lifetime of the task being scheduled and the second is by moving or transfering owership of the task into the i/o scheduler. The first can allow for return values but requires the caller to manage the lifetime of the coroutine while the second requires the return type of the task to be void but allows for variable or unknown task lifetimes. Transferring task lifetime to the scheduler can be useful, e.g. for a network request.

The example provided here shows an i/o scheduler that spins up a basic coro::net::tcp::server and a coro::net::tcp::client that will connect to each other and then send a request and a response.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    auto scheduler = coro::io_scheduler::make_shared(coro::io_scheduler::options{
        // The scheduler will spawn a dedicated event processing thread.  This is the default, but
        // it is possible to use 'manual' and call 'process_events()' to drive the scheduler yourself.
        .thread_strategy = coro::io_scheduler::thread_strategy_t::spawn,
        // If the scheduler is in spawn mode this functor is called upon starting the dedicated
        // event processor thread.
        .on_io_thread_start_functor = [] { std::cout << "io_scheduler::process event thread start\n"; },
        // If the scheduler is in spawn mode this functor is called upon stopping the dedicated
        // event process thread.
        .on_io_thread_stop_functor = [] { std::cout << "io_scheduler::process event thread stop\n"; },
        // The io scheduler can use a coro::thread_pool to process the events or tasks it is given.
        // You can use an execution strategy of `process_tasks_inline` to have the event loop thread
        // directly process the tasks, this might be desirable for small tasks vs a thread pool for large tasks.
        .pool =
            coro::thread_pool::options{
                .thread_count            = 2,
                .on_thread_start_functor = [](size_t i)
                { std::cout << "io_scheduler::thread_pool worker " << i << " starting\n"; },
                .on_thread_stop_functor = [](size_t i)
                { std::cout << "io_scheduler::thread_pool worker " << i << " stopping\n"; },
            },
        .execution_strategy = coro::io_scheduler::execution_strategy_t::process_tasks_on_thread_pool});

    auto make_server_task = [&]() -> coro::task<void>
    {
        // Start by creating a tcp server, we'll do this before putting it into the scheduler so
        // it is immediately available for the client to connect since this will create a socket,
        // bind the socket and start listening on that socket.  See tcp::server for more details on
        // how to specify the local address and port to bind to as well as enabling SSL/TLS.
        coro::net::tcp::server server{scheduler};

        // Now scheduler this task onto the scheduler.
        co_await scheduler->schedule();

        // Wait for an incoming connection and accept it.
        auto poll_status = co_await server.poll();
        if (poll_status != coro::poll_status::event)
        {
            co_return; // Handle error, see poll_status for detailed error states.
        }

        // Accept the incoming client connection.
        auto client = server.accept();

        // Verify the incoming connection was accepted correctly.
        if (!client.socket().is_valid())
        {
            co_return; // Handle error.
        }

        // Now wait for the client message, this message is small enough it should always arrive
        // with a single recv() call.
        poll_status = co_await client.poll(coro::poll_op::read);
        if (poll_status != coro::poll_status::event)
        {
            co_return; // Handle error.
        }

        // Prepare a buffer and recv() the client's message.  This function returns the recv() status
        // as well as a span<char> that overlaps the given buffer for the bytes that were read.  This
        // can be used to resize the buffer or work with the bytes without modifying the buffer at all.
        std::string request(256, '\0');
        auto [recv_status, recv_bytes] = client.recv(request);
        if (recv_status != coro::net::recv_status::ok)
        {
            co_return; // Handle error, see net::recv_status for detailed error states.
        }

        request.resize(recv_bytes.size());
        std::cout << "server: " << request << "\n";

        // Make sure the client socket can be written to.
        poll_status = co_await client.poll(coro::poll_op::write);
        if (poll_status != coro::poll_status::event)
        {
            co_return; // Handle error.
        }

        // Send the server response to the client.
        // This message is small enough that it will be sent in a single send() call, but to demonstrate
        // how to use the 'remaining' portion of the send() result this is wrapped in a loop until
        // all the bytes are sent.
        std::string           response  = "Hello from server.";
        std::span<const char> remaining = response;
        do
        {
            // Optimistically send() prior to polling.
            auto [send_status, r] = client.send(remaining);
            if (send_status != coro::net::send_status::ok)
            {
                co_return; // Handle error, see net::send_status for detailed error states.
            }

            if (r.empty())
            {
                break; // The entire message has been sent.
            }

            // Re-assign remaining bytes for the next loop iteration and poll for the socket to be
            // able to be written to again.
            remaining    = r;
            auto pstatus = co_await client.poll(coro::poll_op::write);
            if (pstatus != coro::poll_status::event)
            {
                co_return; // Handle error.
            }
        } while (true);

        co_return;
    };

    auto make_client_task = [&]() -> coro::task<void>
    {
        // Immediately schedule onto the scheduler.
        co_await scheduler->schedule();

        // Create the tcp::client with the default settings, see tcp::client for how to set the
        // ip address, port, and optionally enabling SSL/TLS.
        coro::net::tcp::client client{scheduler};

        // Ommitting error checking code for the client, each step should check the status and
        // verify the number of bytes sent or received.

        // Connect to the server.
        co_await client.connect();

        // Make sure the client socket can be written to.
        co_await client.poll(coro::poll_op::write);

        // Send the request data.
        client.send(std::string_view{"Hello from client."});

        // Wait for the response and receive it.
        co_await client.poll(coro::poll_op::read);
        std::string response(256, '\0');
        auto [recv_status, recv_bytes] = client.recv(response);
        response.resize(recv_bytes.size());

        std::cout << "client: " << response << "\n";
        co_return;
    };

    // Create and wait for the server and client tasks to complete.
    coro::sync_wait(coro::when_all(make_server_task(), make_client_task()));
}

Example output:

$ ./examples/coro_io_scheduler
io_scheduler::thread_pool worker 0 starting
io_scheduler::process event thread start
io_scheduler::thread_pool worker 1 starting
server: Hello from client.
client: Hello from server.
io_scheduler::thread_pool worker 0 stopping
io_scheduler::thread_pool worker 1 stopping
io_scheduler::process event thread stop

task_container

coro::task_container is a special container type that will maintain the lifetime of tasks that do not have a known lifetime. This is extremely useful for tasks that hold open connections to clients and possibly process multiple requests from that client before shutting down. The task doesn't know how long it will be alive but at some point in the future it will complete and need to have its resources cleaned up. The coro::task_container does this by wrapping the users task into anothe coroutine task that will mark itself for deletion upon completing within the parent task container. The task container should then run garbage collection periodically, or by default when a new task is added, to prune completed tasks from the container.

All tasks that are stored within a coro::task_container must have a void return type since their result cannot be accessed due to the task's lifetime being indeterminate.

#include <coro/coro.hpp>
#include <iostream>

int main()
{
    auto scheduler = coro::io_scheduler::make_shared(
        coro::io_scheduler::options{.pool = coro::thread_pool::options{.thread_count = 1}});

    auto make_server_task = [&]() -> coro::task<void>
    {
        // This is the task that will handle processing a client's requests.
        auto serve_client = [](coro::net::tcp::client client) -> coro::task<void>
        {
            size_t requests{1};

            while (true)
            {
                // Continue to accept more requests until the client closes the connection.
                co_await client.poll(coro::poll_op::read);

                std::string request(64, '\0');
                auto [recv_status, recv_bytes] = client.recv(request);
                if (recv_status == coro::net::recv_status::closed)
                {
                    break;
                }

                request.resize(recv_bytes.size());
                std::cout << "server: " << request << "\n";

                // Make sure the client socket can be written to.
                co_await client.poll(coro::poll_op::write);

                auto response = "Hello from server " + std::to_string(requests);
                client.send(response);

                ++requests;
            }

            co_return;
        };

        // Spin up the tcp::server and schedule it onto the io_scheduler.
        coro::net::tcp::server server{scheduler};
        co_await scheduler->schedule();

        // All incoming connections will be stored into the task container until they are completed.
        coro::task_container tc{scheduler};

        // Wait for an incoming connection and accept it, this example will only use 1 connection.
        co_await server.poll();
        auto client = server.accept();
        // Store the task that will serve the client into the container and immediately begin executing it
        // on the task container's thread pool, which is the same as the scheduler.
        tc.start(serve_client(std::move(client)));

        // Wait for all clients to complete before shutting down the tcp::server.
        co_await tc.garbage_collect_and_yield_until_empty();
        co_return;
    };

    auto make_client_task = [&](size_t request_count) -> coro::task<void>
    {
        co_await scheduler->schedule();
        coro::net::tcp::client client{scheduler};

        co_await client.connect();

        // Send N requests on the same connection and wait for the server response to each one.
        for (size_t i = 1; i <= request_count; ++i)
        {
            // Make sure the client socket can be written to.
            co_await client.poll(coro::poll_op::write);

            // Send the request data.
            auto request = "Hello from client " + std::to_string(i);
            client.send(request);

            co_await client.poll(coro::poll_op::read);
            std::string response(64, '\0');
            auto [recv_status, recv_bytes] = client.recv(response);
            response.resize(recv_bytes.size());

            std::cout << "client: " << response << "\n";
        }

        co_return; // Upon exiting the tcp::client will close its connection to the server.
    };

    coro::sync_wait(coro::when_all(make_server_task(), make_client_task(5)));
}

$ ./examples/coro_task_container
server: Hello from client 1
client: Hello from server 1
server: Hello from client 2
client: Hello from server 2
server: Hello from client 3
client: Hello from server 3
server: Hello from client 4
client: Hello from server 4
server: Hello from client 5
client: Hello from server 5

tcp_echo_server

See examples/coro_tcp_echo_erver.cpp for a basic TCP echo server implementation. You can use tools like ab to benchmark against this echo server.

Using a Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz:

$ ab -n 10000000 -c 1000 -k http://127.0.0.1:8888/
This is ApacheBench, Version 2.3 <$Revision: 1879490 $>
Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/
Licensed to The Apache Software Foundation, http://www.apache.org/

Benchmarking 127.0.0.1 (be patient)
Completed 1000000 requests
Completed 2000000 requests
Completed 3000000 requests
Completed 4000000 requests
Completed 5000000 requests
Completed 6000000 requests
Completed 7000000 requests
Completed 8000000 requests
Completed 9000000 requests
Completed 10000000 requests
Finished 10000000 requests


Server Software:
Server Hostname:        127.0.0.1
Server Port:            8888

Document Path:          /
Document Length:        0 bytes

Concurrency Level:      1000
Time taken for tests:   90.290 seconds
Complete requests:      10000000
Failed requests:        0
Non-2xx responses:      10000000
Keep-Alive requests:    10000000
Total transferred:      1060000000 bytes
HTML transferred:       0 bytes
Requests per second:    110753.80 [#/sec] (mean)
Time per request:       9.029 [ms] (mean)
Time per request:       0.009 [ms] (mean, across all concurrent requests)
Transfer rate:          11464.75 [Kbytes/sec] received

Connection Times (ms)
              min  mean[+/-sd] median   max
Connect:        0    0   0.2      0      24
Processing:     2    9   1.6      9      77
Waiting:        0    9   1.6      9      77
Total:          2    9   1.6      9      88

Percentage of the requests served within a certain time (ms)
  50%      9
  66%      9
  75%     10
  80%     10
  90%     11
  95%     12
  98%     14
  99%     15
 100%     88 (longest request)

http_200_ok_server

See examples/coro_http_200_ok_erver.cpp for a basic HTTP 200 OK response server implementation. You can use tools like wrk or autocannon to benchmark against this HTTP 200 OK server.

Using a Intel(R) Core(TM) i7-9750H CPU @ 2.60GHz:

$ ./wrk -c 1000 -d 60s -t 6 http://127.0.0.1:8888/
Running 1m test @ http://127.0.0.1:8888/
  6 threads and 1000 connections
  Thread Stats   Avg      Stdev     Max   +/- Stdev
    Latency     2.96ms    3.61ms  82.22ms   90.06%
    Req/Sec    54.69k     6.75k   70.51k    80.88%
  19569177 requests in 1.00m, 1.08GB read
Requests/sec: 325778.99
Transfer/sec:     18.33MB

Requirements

C++20 Compiler with coroutine support
    g++ [10.2.1, 10.3.1, 11, 12, 13]
    clang++ [16, 17]
        No networking/TLS support on MacOS.
    MSVC Windows 2022 CL
        No networking/TLS support.
CMake
make or ninja
pthreads
openssl
gcov/lcov (For generating coverage only)

Build Instructions

Tested Operating Systems

ubuntu:20.04, 22.04
fedora:32-40
openSUSE/leap:15.6
Windows 2022
Emscripten 3.1.45
MacOS 12

Cloning the project

This project uses git submodules, to properly checkout this project use:

git clone --recurse-submodules <libcoro-url>

This project depends on the following git sub-modules:

libc-ares For async DNS resolver, this is a git submodule.
catch2 For testing, this is embedded in the test/ directory.

Building

mkdir Release && cd Release
cmake -DCMAKE_BUILD_TYPE=Release ..
cmake --build .

CMake Options:

Name	Default	Description
LIBCORO_EXTERNAL_DEPENDENCIES	OFF	Use CMake find_package to resolve dependencies instead of embedded libraries.
LIBCORO_BUILD_TESTS	ON	Should the tests be built? Note this is only default ON if libcoro is the root CMakeLists.txt
LIBCORO_CODE_COVERAGE	OFF	Should code coverage be enabled? Requires tests to be enabled.
LIBCORO_BUILD_EXAMPLES	ON	Should the examples be built? Note this is only default ON if libcoro is the root CMakeLists.txt
LIBCORO_FEATURE_NETWORKING	ON	Include networking features. Requires Linux platform. MSVC/MacOS not supported.
LIBCORO_FEATURE_TLS	ON	Include TLS features. Requires networking to be enabled. MSVC/MacOS not supported.

Adding to your project

add_subdirectory()

# Include the checked out libcoro code in your CMakeLists.txt file
add_subdirectory(path/to/libcoro)

# Link the libcoro cmake target to your project(s).
target_link_libraries(${PROJECT_NAME} PUBLIC libcoro)

FetchContent

CMake can include the project directly by downloading the source, compiling and linking to your project via FetchContent, below is an example on how you might do this within your project.

cmake_minimum_required(VERSION 3.11)

# Fetch the project and make it available for use.
include(FetchContent)
FetchContent_Declare(
    libcoro
    GIT_REPOSITORY https://github.com/jbaldwin/libcoro.git
    GIT_TAG        <TAG_OR_GIT_HASH>
)
FetchContent_MakeAvailable(libcoro)

# Link the libcoro cmake target to your project(s).
target_link_libraries(${PROJECT_NAME} PUBLIC libcoro)

Package managers

libcoro is available via package managers Conan and vcpkg.

Contributing

Contributing is welcome, if you have ideas or bugs please open an issue. If you want to open a PR they are also welcome, if you are adding a bugfix or a feature please include tests to verify the feature or bugfix is working properly. If it isn't included I will be asking for you to add some!

Tests

The tests will automatically be run by github actions on creating a pull request. They can also be ran locally after building from the build directory:

# Invoke via cmake with all output from the tests displayed to console:
ctest -VV

# Or invoke directly, can pass the name of tests to execute, the framework used is catch2.
# Tests are tagged with their group, below is how to run all of the coro::net::tcp::server tests:
./test/libcoro_test "[tcp_server]"

If you open a PR for a bugfix or new feature please include tests to verify that the change is working as intended. If your PR doesn't include tests I will ask you to add them and won't merge until they are added and working properly. Tests are found in the /test directory and are organized by object type.

Support

File bug reports, feature requests and questions using GitHub libcoro Issues

Name		Name	Last commit message	Last commit date
Latest commit History 153 Commits
.githooks		.githooks
.github/workflows		.github/workflows
examples		examples
include/coro		include/coro
src		src
test		test
vendor/c-ares		vendor/c-ares
.clang-format		.clang-format
.gitignore		.gitignore
.gitmodules		.gitmodules
CMakeLists.txt		CMakeLists.txt
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
libcoro.pc.in		libcoro.pc.in

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Repository files navigation

libcoro C++20 coroutine library

Overview

Usage

A note on co_await and threads

sync_wait

when_all

task

generator

event

latch

mutex

shared_mutex

semaphore

ring_buffer

thread_pool

io_scheduler

task_container

tcp_echo_server

http_200_ok_server

Requirements

Build Instructions

Tested Operating Systems

Cloning the project

Building

Adding to your project

add_subdirectory()

FetchContent

Package managers

Contributing

Tests

Support

About

Releases 14

Packages

Contributors 17

Languages

License

jbaldwin/libcoro

Folders and files

Latest commit

History

Repository files navigation

libcoro C++20 coroutine library

Overview

Usage

A note on co_await and threads

sync_wait

when_all

task

generator

event

latch

mutex

shared_mutex

semaphore

ring_buffer

thread_pool

io_scheduler

task_container

tcp_echo_server

http_200_ok_server

Requirements

Build Instructions

Tested Operating Systems

Cloning the project

Building

Adding to your project

add_subdirectory()

FetchContent

Package managers

Contributing

Tests

Support

About

Topics

Resources

License

Stars

Watchers

Forks

Releases 14

Packages 0

Contributors 17

Languages

Packages