Skip to content

Latest commit

 

History

History
163 lines (109 loc) · 5.2 KB

README.md

File metadata and controls

163 lines (109 loc) · 5.2 KB
Raw

End-to-End Tests

Spins up and tests Tendermint networks in Docker Compose based on a testnet manifest. To run the CI testnet:

make
./build/runner -f networks/ci.toml

This creates and runs a testnet named ci under networks/ci/ (determined by the manifest filename).

Testnet Manifests

Testnets are specified as TOML manifests. For an example see networks/ci.toml, and for documentation see pkg/manifest.go.

Random Testnet Generation

Random (but deterministic) combinations of testnets can be generated with generator:

./build/generator -d networks/generated/

# Split networks into 8 groups (by filename)
./build/generator -g 8 -d networks/generated/

Multiple testnets can be run with the run-multiple.sh script:

./run-multiple.sh networks/generated/gen-group3-*.toml

Test Stages

The test runner has the following stages, which can also be executed explicitly by running ./build/runner -f <manifest> <stage>:

  • setup: generates configuration files.

  • start: starts Docker containers.

  • load: generates a transaction load against the testnet nodes.

  • perturb: runs any requested perturbations (e.g. node restarts or network disconnects).

  • wait: waits for a few blocks to be produced, and for all nodes to catch up to it.

  • test: runs test cases in tests/ against all nodes in a running testnet.

  • stop: stops Docker containers.

  • cleanup: removes configuration files and Docker containers/networks.

Auxiliary commands:

  • logs: outputs all node logs.

  • tail: tails (follows) node logs until cancelled.

Tests

Test cases are written as normal Go tests in tests/. They use a testNode() helper which executes each test as a parallel subtest for each node in the network.

Running Manual Tests

To run tests manually, set the E2E_MANIFEST environment variable to the path of the testnet manifest (e.g. networks/ci.toml) and run them as normal, e.g.:

./build/runner -f networks/ci.toml start
E2E_MANIFEST=networks/ci.toml go test -v ./tests/...

Optionally, E2E_NODE specifies the name of a single testnet node to test.

These environment variables can also be specified in tests/e2e_test.go to run tests from an editor or IDE:

func init() {
	// This can be used to manually specify a testnet manifest and/or node to
	// run tests against. The testnet must have been started by the runner first.
	os.Setenv("E2E_MANIFEST", "networks/ci.toml")
	os.Setenv("E2E_NODE", "validator01")
}

Debugging Failures

If a command or test fails, the runner simply exits with an error message and non-zero status code. The testnet is left running with data in the testnet directory, and can be inspected with e.g. docker ps, docker logs, or ./build/runner -f <manifest> logs or tail. To shut down and remove the testnet, run ./build/runner -f <manifest> cleanup.

If the standard log_level is not detailed enough (e.g. you want "debug" level logging for certain modules), you can change it in the manifest file.

Each node exposes a pprof server. To find out the local port, run docker port <NODENAME> 6060 | awk -F: '{print $2}'. Then you may perform any queries supported by the pprof tool. Julia Evans has a great post on this subject.

export PORT=$(docker port full01 6060 | awk -F: '{print $2}')

go tool pprof http://localhost:$PORT/debug/pprof/goroutine
go tool pprof http://localhost:$PORT/debug/pprof/heap
go tool pprof http://localhost:$PORT/debug/pprof/threadcreate
go tool pprof http://localhost:$PORT/debug/pprof/block
go tool pprof http://localhost:$PORT/debug/pprof/mutex

Enabling IPv6

Docker does not enable IPv6 by default. To do so, enter the following in daemon.json (or in the Docker for Mac UI under Preferences → Docker Engine):

{
  "ipv6": true,
  "fixed-cidr-v6": "2001:db8:1::/64"
}

Benchmarking Testnets

It is also possible to run a simple benchmark on a testnet. This is done through the benchmark command. This manages the entire process: setting up the environment, starting the test net, waiting for a considerable amount of blocks to be used (currently 100), and then returning the following metrics from the sample of the blockchain:

  • Average time to produce a block
  • Standard deviation of producing a block
  • Minimum and maximum time to produce a block

Running Individual Nodes

The E2E test harness is designed to run several nodes of varying configurations within docker. It is also possible to run a single node in the case of running larger, geographically-dispersed testnets. To run a single node you can either run:

Built-in

make node
tendermint init validator
TMHOME=$HOME/.tendermint ./build/node ./node/built-in.toml

To make things simpler the e2e application can also be run in the tendermint binary by running

tendermint start --proxy-app e2e

However this won't offer the same level of configurability of the application.

Socket

make node
tendermint init validator
tendermint start
./build/node ./node.socket.toml

Check node/config.go to see how the settings of the test application can be tweaked.