default.cfg

[global]
#
# Default Data Set
#
twoStepFlag		1
slaveOnly		0
priority1		128
priority2		128
domainNumber		0
clockClass		248
clockAccuracy		0xFE
offsetScaledLogVariance	0xFFFF
free_running		0
freq_est_interval	1
dscp_event		0
dscp_general		0
#
# Port Data Set
#
logAnnounceInterval	1
logSyncInterval		0
logMinDelayReqInterval	0
logMinPdelayReqInterval	0
announceReceiptTimeout	3
syncReceiptTimeout	0
delayAsymmetry		0
fault_reset_interval	4
neighborPropDelayThresh	20000000
#
# Run time options
#
assume_two_step		0
logging_level		6
path_trace_enabled	0
follow_up_info		0
hybrid_e2e		0
tx_timestamp_timeout	1
use_syslog		1
verbose			0
summary_interval	0
kernel_leap		1
check_fup_sync		0
#
# Servo Options
#
pi_proportional_const	0.0
pi_integral_const	0.0
pi_proportional_scale	0.0
pi_proportional_exponent	-0.3
pi_proportional_norm_max	0.7
pi_integral_scale	0.0
pi_integral_exponent	0.4
pi_integral_norm_max	0.3
step_threshold		0.0
first_step_threshold	0.00002
max_frequency		900000000
clock_servo		pi
sanity_freq_limit	200000000
ntpshm_segment		0
#
# Transport options
#
transportSpecific	0x0
ptp_dst_mac		01:1B:19:00:00:00
p2p_dst_mac		01:80:C2:00:00:0E
udp_ttl			1
udp6_scope		0x0E
uds_address		/var/run/ptp4l
#
# Default interface options
#
network_transport	UDPv4
delay_mechanism		E2E
time_stamping		hardware
tsproc_mode		filter
delay_filter		moving_median
delay_filter_length	10
egressLatency		0
ingressLatency		0
boundary_clock_jbod	0
#
# Clock description
#
productDescription	;;
revisionData		;;
manufacturerIdentity	00:00:00
userDescription		;
timeSource		0xA0