Only down arrow on every cover

[Zeusur]

If i choose a Cover for Dashbord, I only can push the up arrow. The down arrow is blurred out.

[nemzoles]

Actually I like to ad to this.

whenever pressing down (or up) it does not matter, pressing down (or up again) will not be possible. So far so good.

Now comes the tricky bit! one can only stop the current action by pressing the "Stop-button" or directly pressing the button for the opposite direction.
However, now you can only drive the shutter in the opposite direction. not in the original direction...
Down-stop-down is not possible. (or up-stop-up)

[Zeusur]

The Up Arrow is never clickable. So I cant't use it.

[nemzoles]

What works for me is:
USB 300 Gateway Device
Shutter Actor: FJ62

gateway:

• id: 1
  base_id: FF-xx-yy-80
  device_type: enocean-usb300 # baseId of USB300 gateway
  devices:
  cover:
  • id: 04-ab-cd-E1 # ID printed on Actor kast byte to be used in sender ID
    eep: G5-3F-7F
    name: "FJ62Np WZ mitte"
    sender:
    id: FF-xx-yy-E1 # Base ID of Gateway (USB300) but last last byte needs to be last byte of FJ62 Actor!!
    eep: H5-3F-7F
    device_class: shutter
    time_closes: 40
    time_opens: 40

also please make sure that time_opens and time_closes is 3-5s larger than the time your shutter actually takes to fully close/open manually.