macOS 13.2 SIGSEGV when updating firmware from file.

[lvfrazao]

While trying to install custom firmware from a file the qFlipper application crashed with a seg fault.

Crashed Thread:        12  Thread (pooled)

Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000038
Exception Codes:       0x0000000000000001, 0x0000000000000038

Termination Reason:    Namespace SIGNAL, Code 11 Segmentation fault: 11
Terminating Process:   exc handler [31384]

Stack trace:

Thread 12 Crashed:: Thread (pooled)
0   qFlipper                      	       0x104835dcc TarArchive::root() const + 0
1   qFlipper                      	       0x104837810 TarZipUncompressor::extractFiles() + 40
2   qFlipper                      	       0x104837d5c QtConcurrent::RunFunctionTaskBase<void>::run() + 80
3   qFlipper                      	       0x105e27748 QThreadPoolThread::run() + 220
4   qFlipper                      	       0x105e23680 QThreadPrivate::start(void*) + 332
5   libsystem_pthread.dylib       	       0x1a0dbe06c _pthread_start + 148
6   libsystem_pthread.dylib       	       0x1a0db8e2c thread_start + 8


Thread 12 crashed with ARM Thread State (64-bit):
    x0: 0x0000000000000000   x1: 0x00000001048377e8   x2: 0x0000000128a08200   x3: 0x000000000000000b
    x4: 0x0000000000000000   x5: 0x00000000000000a0   x6: 0x0000000000001000   x7: 0x000000003b9ac860
    x8: 0x0000000000000000   x9: 0x0000600001c37080  x10: 0x0000000000bf3d01  x11: 0x00000000005f8c00
   x12: 0x0000000128800028  x13: 0x00000000ffff800b  x14: 0x0000000000001000  x15: 0x00000000ffff7dff
   x16: 0x00000001288081f8  x17: 0x00000001a0c22640  x18: 0x0000000000000000  x19: 0x0000600001c37080
   x20: 0x0000600001c37480  x21: 0x00006000006f0040  x22: 0x0000600001c37480  x23: 0x0000000000000001
   x24: 0x57b419022e2f7e49  x25: 0x0000000000000090  x26: 0x0000000000000001  x27: 0x000000010df6bae0
   x28: 0x0000000000000000   fp: 0x000000016b8a6e90   lr: 0x0000000104837810
    sp: 0x000000016b8a6e30   pc: 0x0000000104835dcc cpsr: 0x60001000
   far: 0x0000000000000038  esr: 0x92000006 (Data Abort) byte read Translation fault

To Reproduce
Steps to reproduce the behavior:

1. Download unleashed firmware 0.34 from here: https://github.com/DarkFlippers/unleashed-firmware/releases/tag/unlshd-034
2. Open qFlipper application
3. Click on 'Install from File'
4. Select ~/Downloads/flipper-z-f7-update-unlshd-034-2.tgz

Expected behavior
Device is updated with new firmware, qFlipper does not crash.

Actual behavior
qFlipper crashes, device is not updated to new firmware.

Additional troubleshooting

1. Does the issue persist if you try multiple times? YES
2. Does reconnecting/rebooting Flipper solve it? NO

qFlipper-20230314-204255.txt

[gsurkov]

Does it crash if you try to install the official firmware from here? (while also having the stock firmware installed on your Flipper Zero).

[jroberts235]

I found that the shasum was not correct after I downloaded via Safari (OSX was trying to un-compress after download and had errors). I got the firmware installed by pulling the file down using wget instead and had no problems installing via qFlipper.

[gsurkov]

@jroberts235 Does qFlipper crash if you use the file downloaded by Safari?