Charging session is not ended when vehicle unplugged, charging sessions show incorrect data #14992
Replies: 2 comments 1 reply
-
It does not matter what the charger shows. It only matters what evcc notices. Check the logfile- if evcc doesn't see intermediate |
Beta Was this translation helpful? Give feedback.
-
|
What we can do however is check if the vehicle identifier has changed while we're not seeing a status change. See #14995 |
Beta Was this translation helpful? Give feedback.
-
|
Have to check logs next time. |
Beta Was this translation helpful? Give feedback.
-
Charging sessions show incorrect data for vehicle.
If vehicle 1 charging is not finished and vehicle 2 is plugged in, kWh reading for charged energy continues from where vehicle 1 was stopped. Even that charger shows vehicle 1 disconnected before connecting vehicle 2.
If i disconnect vehicle 1, then change to vehicle 2, evcc changes back to vehicle 1 when vehicle 2 is connected as it is set default for that charger.
So i unplug vehicle 1, plug vehicle 2 in, wait for charger/evcc to recognize vehicle is plugged in, then change to vehicle 2, it is now continuing from where vehicle 1 left.
Is it me using it wrong or should charging session be ended when vehicle is unplugged, or should i wait for longer before plugging second vehicle?
Also would it be possible to make evcc not to change vehicle to default when plugged in if vehicle was changed say 30s before?
Communication with Elli Charger Pro seems slow, it is possible to plug vehicle in, then start to change vehicle in evcc UI before it shows charging or connected, so usually i end up changing connected vehicle twice (because default set for that charger).
Beta Was this translation helpful? Give feedback.
All reactions