From 26afa348ea394b211a757c89d60f40fd0ce560f2 Mon Sep 17 00:00:00 2001 From: Samuel Angebault Date: Thu, 5 Jul 2018 14:30:57 -0700 Subject: [PATCH 001/180] [device] Misc fixes for Arista platforms (#1844) * Update sensors.conf for 7050QX-32 and 7050QX-32S These two platforms were using a previous version of a kernel driver. The new one names the i2c buses differently. We therefore need to rename them here. * Fix the default minigraph for the 7050QX-32S The interface offset is invalid which makes sonic-cfggen generate an invalid config_db.jon in rc.local. This config then silently makes orchagent/syncd fail. * Use the partition on which sonic-aboot.swi is Instead of always assuming /mnt/flash, use the partition where the image to be installed lies. This allow for the image to be on any partition. --- .../x86_64-arista_7050_qx32/sensors.conf | 10 +- .../x86_64-arista_7050_qx32s/minigraph.xml | 903 +----------------- .../x86_64-arista_7050_qx32s/sensors.conf | 10 +- files/initramfs-tools/arista-convertfs.j2 | 13 +- 4 files changed, 50 insertions(+), 886 deletions(-) diff --git a/device/arista/x86_64-arista_7050_qx32/sensors.conf b/device/arista/x86_64-arista_7050_qx32/sensors.conf index 469f63eaf1e4..481c9ec30114 100644 --- a/device/arista/x86_64-arista_7050_qx32/sensors.conf +++ b/device/arista/x86_64-arista_7050_qx32/sensors.conf @@ -2,11 +2,11 @@ # ------------------------------------------------ # -bus "i2c-2" "SCD SMBus master 0 bus 0" -bus "i2c-3" "SCD SMBus master 0 bus 1" -bus "i2c-5" "SCD SMBus master 0 bus 3" -bus "i2c-6" "SCD SMBus master 0 bus 4" -bus "i2c-7" "SCD SMBus master 0 bus 5" +bus "i2c-2" "SCD 0000:04:00.0 SMBus master 0 bus 0" +bus "i2c-3" "SCD 0000:04:00.0 SMBus master 0 bus 1" +bus "i2c-5" "SCD 0000:04:00.0 SMBus master 0 bus 3" +bus "i2c-6" "SCD 0000:04:00.0 SMBus master 0 bus 4" +bus "i2c-7" "SCD 0000:04:00.0 SMBus master 0 bus 5" chip "k10temp-pci-00c3" label temp1 "Cpu temp sensor" diff --git a/device/arista/x86_64-arista_7050_qx32s/minigraph.xml b/device/arista/x86_64-arista_7050_qx32s/minigraph.xml index f28c9a9ae6cb..f8b99096ab24 100644 --- a/device/arista/x86_64-arista_7050_qx32s/minigraph.xml +++ b/device/arista/x86_64-arista_7050_qx32s/minigraph.xml @@ -2,623 +2,8 @@ - - ARISTA01T0 - 10.0.0.33 - sonic - 10.0.0.32 - 1 - 180 - 60 - - - sonic - 10.0.0.0 - ARISTA01T2 - 10.0.0.1 - 1 - 180 - 60 - - - ARISTA02T0 - 10.0.0.35 - sonic - 10.0.0.34 - 1 - 180 - 60 - - - sonic - 10.0.0.2 - ARISTA02T2 - 10.0.0.3 - 1 - 180 - 60 - - - ARISTA03T0 - 10.0.0.37 - sonic - 10.0.0.36 - 1 - 180 - 60 - - - sonic - 10.0.0.4 - ARISTA03T2 - 10.0.0.5 - 1 - 180 - 60 - - - ARISTA04T0 - 10.0.0.39 - sonic - 10.0.0.38 - 1 - 180 - 60 - - - sonic - 10.0.0.6 - ARISTA04T2 - 10.0.0.7 - 1 - 180 - 60 - - - ARISTA05T0 - 10.0.0.41 - sonic - 10.0.0.40 - 1 - 180 - 60 - - - sonic - 10.0.0.8 - ARISTA05T2 - 10.0.0.9 - 1 - 180 - 60 - - - ARISTA06T0 - 10.0.0.43 - sonic - 10.0.0.42 - 1 - 180 - 60 - - - sonic - 10.0.0.10 - ARISTA06T2 - 10.0.0.11 - 1 - 180 - 60 - - - ARISTA07T0 - 10.0.0.45 - sonic - 10.0.0.44 - 1 - 180 - 60 - - - sonic - 10.0.0.12 - ARISTA07T2 - 10.0.0.13 - 1 - 180 - 60 - - - ARISTA08T0 - 10.0.0.47 - sonic - 10.0.0.46 - 1 - 180 - 60 - - - sonic - 10.0.0.14 - ARISTA08T2 - 10.0.0.15 - 1 - 180 - 60 - - - ARISTA09T0 - 10.0.0.49 - sonic - 10.0.0.48 - 1 - 180 - 60 - - - sonic - 10.0.0.16 - ARISTA09T2 - 10.0.0.17 - 1 - 180 - 60 - - - ARISTA10T0 - 10.0.0.51 - sonic - 10.0.0.50 - 1 - 180 - 60 - - - sonic - 10.0.0.18 - ARISTA10T2 - 10.0.0.19 - 1 - 180 - 60 - - - ARISTA11T0 - 10.0.0.53 - sonic - 10.0.0.52 - 1 - 180 - 60 - - - sonic - 10.0.0.20 - ARISTA11T2 - 10.0.0.21 - 1 - 180 - 60 - - - ARISTA12T0 - 10.0.0.55 - sonic - 10.0.0.54 - 1 - 180 - 60 - - - sonic - 10.0.0.22 - ARISTA12T2 - 10.0.0.23 - 1 - 180 - 60 - - - ARISTA13T0 - 10.0.0.57 - sonic - 10.0.0.56 - 1 - 180 - 60 - - - sonic - 10.0.0.24 - ARISTA13T2 - 10.0.0.25 - 1 - 180 - 60 - - - ARISTA14T0 - 10.0.0.59 - sonic - 10.0.0.58 - 1 - 180 - 60 - - - sonic - 10.0.0.26 - ARISTA14T2 - 10.0.0.27 - 1 - 180 - 60 - - - ARISTA15T0 - 10.0.0.61 - sonic - 10.0.0.60 - 1 - 180 - 60 - - - sonic - 10.0.0.28 - ARISTA15T2 - 10.0.0.29 - 1 - 180 - 60 - - - ARISTA16T0 - 10.0.0.63 - sonic - 10.0.0.62 - 1 - 180 - 60 - - - sonic - 10.0.0.30 - ARISTA16T2 - 10.0.0.31 - 1 - 180 - 60 - - - 65100 - sonic - - -
10.0.0.33
- - - - -
10.0.0.1
- - - - -
10.0.0.35
- - - - -
10.0.0.3
- - - - -
10.0.0.37
- - - - -
10.0.0.5
- - - - -
10.0.0.39
- - - - -
10.0.0.7
- - - - -
10.0.0.41
- - - - -
10.0.0.9
- - - - -
10.0.0.43
- - - - -
10.0.0.11
- - - - -
10.0.0.45
- - - - -
10.0.0.13
- - - - -
10.0.0.47
- - - - -
10.0.0.15
- - - - -
10.0.0.49
- - - - -
10.0.0.17
- - - - -
10.0.0.51
- - - - -
10.0.0.19
- - - - -
10.0.0.53
- - - - -
10.0.0.21
- - - - -
10.0.0.55
- - - - -
10.0.0.23
- - - - -
10.0.0.57
- - - - -
10.0.0.25
- - - - -
10.0.0.59
- - - - -
10.0.0.27
- - - - -
10.0.0.61
- - - - -
10.0.0.29
- - - - -
10.0.0.63
- - - - -
10.0.0.31
- - - - - - - - 64001 - ARISTA01T0 - - - - 65200 - ARISTA01T2 - - - - 64002 - ARISTA02T0 - - - - 65200 - ARISTA02T2 - - - - 64003 - ARISTA03T0 - - - - 65200 - ARISTA03T2 - - - - 64004 - ARISTA04T0 - - - - 65200 - ARISTA04T2 - - - - 64005 - ARISTA05T0 - - - - 65200 - ARISTA05T2 - - - - 64006 - ARISTA06T0 - - - - 65200 - ARISTA06T2 - - - - 64007 - ARISTA07T0 - - - - 65200 - ARISTA07T2 - - - - 64008 - ARISTA08T0 - - - - 65200 - ARISTA08T2 - - - - 64009 - ARISTA09T0 - - - - 65200 - ARISTA09T2 - - - - 64010 - ARISTA10T0 - - - - 65200 - ARISTA10T2 - - - - 64011 - ARISTA11T0 - - - - 65200 - ARISTA11T2 - - - - 64012 - ARISTA12T0 - - - - 65200 - ARISTA12T2 - - - - 64013 - ARISTA13T0 - - - - 65200 - ARISTA13T2 - - - - 64014 - ARISTA14T0 - - - - 65200 - ARISTA14T2 - - - - 64015 - ARISTA15T0 - - - - 65200 - ARISTA15T2 - - - - 64016 - ARISTA16T0 - - - - 65200 - ARISTA16T2 - - @@ -645,162 +30,162 @@ - Ethernet1/1 + Ethernet5/1 10.0.0.0/31 - Ethernet2/1 + Ethernet6/1 10.0.0.2/31 - Ethernet3/1 + Ethernet7/1 10.0.0.4/31 - Ethernet4/1 + Ethernet8/1 10.0.0.6/31 - Ethernet5/1 + Ethernet9/1 10.0.0.8/31 - Ethernet6/1 + Ethernet10/1 10.0.0.10/31 - Ethernet7/1 + Ethernet11/1 10.0.0.12/31 - Ethernet8/1 + Ethernet12/1 10.0.0.14/31 - Ethernet9/1 + Ethernet13/1 10.0.0.16/31 - Ethernet10/1 + Ethernet14/1 10.0.0.18/31 - Ethernet11/1 + Ethernet15/1 10.0.0.20/31 - Ethernet12/1 + Ethernet16/1 10.0.0.22/31 - Ethernet13/1 + Ethernet17/1 10.0.0.24/31 - Ethernet14/1 + Ethernet18/1 10.0.0.26/31 - Ethernet15/1 + Ethernet19/1 10.0.0.28/31 - Ethernet16/1 + Ethernet20/1 10.0.0.30/31 - Ethernet17/1 + Ethernet21/1 10.0.0.32/31 - Ethernet18/1 + Ethernet22/1 10.0.0.34/31 - Ethernet19/1 + Ethernet23/1 10.0.0.36/31 - Ethernet20/1 + Ethernet24/1 10.0.0.38/31 - Ethernet21/1 + Ethernet25/1 10.0.0.40/31 - Ethernet22/1 + Ethernet26/1 10.0.0.42/31 - Ethernet23/1 + Ethernet27/1 10.0.0.44/31 - Ethernet24/1 + Ethernet28/1 10.0.0.46/31 - Ethernet25 + Ethernet29 10.0.0.48/31 - Ethernet26 + Ethernet30 10.0.0.50/31 - Ethernet27 + Ethernet31 10.0.0.52/31 - Ethernet28 + Ethernet32 10.0.0.54/31 - Ethernet29 + Ethernet33 10.0.0.56/31 - Ethernet30 + Ethernet34 10.0.0.58/31 - Ethernet31 + Ethernet35 10.0.0.60/31 - Ethernet32 + Ethernet36 10.0.0.62/31 @@ -812,230 +197,6 @@ - - DeviceInterfaceLink - sonic - Ethernet1/1 - ARISTA01T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet2/1 - ARISTA02T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet3/1 - ARISTA03T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet4/1 - ARISTA04T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet5/1 - ARISTA05T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet6/1 - ARISTA06T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet7/1 - ARISTA07T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet8/1 - ARISTA08T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet9/1 - ARISTA09T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet10/1 - ARISTA10T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet11/1 - ARISTA11T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet12/1 - ARISTA12T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet13/1 - ARISTA13T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet14/1 - ARISTA14T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet15/1 - ARISTA15T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet16/1 - ARISTA16T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet17/1 - ARISTA01T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet18/1 - ARISTA02T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet19/1 - ARISTA03T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet20/1 - ARISTA04T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet21/1 - ARISTA05T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet22/1 - ARISTA06T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet23/1 - ARISTA07T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet24/1 - ARISTA08T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet25 - ARISTA09T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet26 - ARISTA10T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet27 - ARISTA11T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet28 - ARISTA12T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet29 - ARISTA13T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet30 - ARISTA14T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet31 - ARISTA15T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet32 - ARISTA16T0 - Ethernet1 - diff --git a/device/arista/x86_64-arista_7050_qx32s/sensors.conf b/device/arista/x86_64-arista_7050_qx32s/sensors.conf index 9c2dd38597a3..6030de90eea5 100644 --- a/device/arista/x86_64-arista_7050_qx32s/sensors.conf +++ b/device/arista/x86_64-arista_7050_qx32s/sensors.conf @@ -2,11 +2,11 @@ # ------------------------------------------------ # -bus "i2c-2" "SCD SMBus master 0 bus 0" -bus "i2c-3" "SCD SMBus master 0 bus 1" -bus "i2c-5" "SCD SMBus master 0 bus 3" -bus "i2c-6" "SCD SMBus master 0 bus 4" -bus "i2c-7" "SCD SMBus master 0 bus 5" +bus "i2c-2" "SCD 0000:02:00.0 SMBus master 0 bus 0" +bus "i2c-3" "SCD 0000:02:00.0 SMBus master 0 bus 1" +bus "i2c-5" "SCD 0000:02:00.0 SMBus master 0 bus 3" +bus "i2c-6" "SCD 0000:02:00.0 SMBus master 0 bus 4" +bus "i2c-7" "SCD 0000:02:00.0 SMBus master 0 bus 5" chip "k10temp-pci-00c3" label temp1 "Cpu temp sensor" diff --git a/files/initramfs-tools/arista-convertfs.j2 b/files/initramfs-tools/arista-convertfs.j2 index dfd2fc1d7407..cd3b381aa276 100644 --- a/files/initramfs-tools/arista-convertfs.j2 +++ b/files/initramfs-tools/arista-convertfs.j2 @@ -105,6 +105,7 @@ for x in "$@"; do loop=*) x1="${x#loop=}" image_dir="${x1%/*}" + ;; esac done root_dev="$ROOT" @@ -168,12 +169,14 @@ umount "$root_mnt" #### Lines below will modify the root file system, so any failure will be trapped to shell for manual interventions. -# Create a new partition table (content in flash_dev will be deleted) -err_msg="Error: repartitioning $flash_dev failed" -cmd="echo ';' | sfdisk $flash_dev || (sleep 3; blockdev --rereadpt $flash_dev && fdisk -l $flash_dev | grep -q ${root_dev}.*Linux)" -run_cmd "$cmd" "$err_msg" +if [ $(echo -n "$root_dev" | tail -c 1) == "1" ]; then + # Create a new partition table (content in flash_dev will be deleted) + err_msg="Error: repartitioning $flash_dev failed" + cmd="echo ';' | sfdisk $flash_dev || (sleep 3; blockdev --rereadpt $flash_dev && fdisk -l $flash_dev | grep -q ${root_dev}.*Linux)" + run_cmd "$cmd" "$err_msg" +fi -sleep 5 +sleep 2 err_msg="Error: timeout in waiting for $root_dev after repartition" cmd="wait_for_root_dev" run_cmd "$cmd" "$err_msg" From a8af2e57f0d1ff377338b69ae6e51c9eadba2b94 Mon Sep 17 00:00:00 2001 From: Joe LeVeque Date: Fri, 6 Jul 2018 02:50:42 -0700 Subject: [PATCH 002/180] [sonic_debian_extension.j2] Create /var/cache/sonic/ directory (#1845) --- files/build_templates/sonic_debian_extension.j2 | 1 + 1 file changed, 1 insertion(+) diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index d12c5a45f9de..ad22394ff000 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -58,6 +58,7 @@ sudo cp $IMAGE_CONFIGS/environment/motd $FILESYSTEM_ROOT/etc/ # Create all needed directories sudo mkdir -p $FILESYSTEM_ROOT/etc/sonic/ +sudo mkdir -p $FILESYSTEM_ROOT/var/cache/sonic/ sudo mkdir -p $FILESYSTEM_ROOT_USR_SHARE_SONIC_TEMPLATES/ # Install dependencies for SONiC config engine From 51bfc2ebd592fcf653d103b6e559dfc2b56de636 Mon Sep 17 00:00:00 2001 From: Prince Sunny Date: Fri, 6 Jul 2018 09:30:53 -0700 Subject: [PATCH 003/180] [SAI] update SAI header to 1.3 (#1778) --- platform/broadcom/libsaithrift-dev.mk | 2 +- platform/broadcom/python-saithrift.mk | 2 +- platform/broadcom/sai.mk | 8 ++++---- src/sonic-sairedis | 2 +- src/sonic-swss | 2 +- 5 files changed, 8 insertions(+), 8 deletions(-) diff --git a/platform/broadcom/libsaithrift-dev.mk b/platform/broadcom/libsaithrift-dev.mk index d5b2c8d35dd0..1c38f0edc7d3 100644 --- a/platform/broadcom/libsaithrift-dev.mk +++ b/platform/broadcom/libsaithrift-dev.mk @@ -1,6 +1,6 @@ # libsaithrift-dev package -LIBSAITHRIFT_DEV_BRCM = libsaithrift-dev_1.2.1_amd64.deb +LIBSAITHRIFT_DEV_BRCM = libsaithrift-dev_1.3.0_amd64.deb $(LIBSAITHRIFT_DEV_BRCM)_SRC_PATH = $(SRC_PATH)/sonic-sairedis/SAI $(LIBSAITHRIFT_DEV_BRCM)_DEPENDS += $(LIBTHRIFT) $(LIBTHRIFT_DEV) $(THRIFT_COMPILER) $(BRCM_SAI) $(BRCM_SAI_DEV) $(LIBSAITHRIFT_DEV_BRCM)_RDEPENDS += $(LIBTHRIFT) $(BRCM_SAI) diff --git a/platform/broadcom/python-saithrift.mk b/platform/broadcom/python-saithrift.mk index 5f9b88eafea4..53456e06ddb6 100644 --- a/platform/broadcom/python-saithrift.mk +++ b/platform/broadcom/python-saithrift.mk @@ -1,6 +1,6 @@ # python-saithrift package -PYTHON_SAITHRIFT_BRCM = python-saithrift_1.2.1_amd64.deb +PYTHON_SAITHRIFT_BRCM = python-saithrift_1.3.0_amd64.deb $(PYTHON_SAITHRIFT_BRCM)_SRC_PATH = $(SRC_PATH)/sonic-sairedis/SAI $(PYTHON_SAITHRIFT_BRCM)_DEPENDS += $(BRCM_SAI_DEV) $(THRIFT_COMPILER) $(PYTHON_THRIFT) $(LIBTHRIFT_DEV) SONIC_DPKG_DEBS += $(PYTHON_SAITHRIFT_BRCM) diff --git a/platform/broadcom/sai.mk b/platform/broadcom/sai.mk index 5cda170b3391..cd2f570f20e6 100644 --- a/platform/broadcom/sai.mk +++ b/platform/broadcom/sai.mk @@ -1,9 +1,9 @@ -BRCM_SAI = libsaibcm_3.1.3.4-15_amd64.deb -$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm_3.1.3.4-15_amd64.deb?sv=2015-04-05&sr=b&sig=7CIkdlBB%2BY6Xjae0vc1QBnlAVedRkreJRhWM93SyHOI%3D&se=2032-02-29T18%3A31%3A54Z&sp=r" +BRCM_SAI = libsaibcm_3.1.3.5_amd64.deb +$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm_3.1.3.5_amd64.deb?sv=2015-04-05&sr=b&sig=ui%2FF8c4fZOCqWp6KkYLvsJrJtfuWVmBCQkQWJgcyD%2FE%3D&se=2032-03-13T22%3A02%3A37Z&sp=r" -BRCM_SAI_DEV = libsaibcm-dev_3.1.3.4-15_amd64.deb +BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5_amd64.deb $(eval $(call add_derived_package,$(BRCM_SAI),$(BRCM_SAI_DEV))) -$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm-dev_3.1.3.4-15_amd64.deb?sv=2015-04-05&sr=b&sig=rBOT802o1o%2BAcogaXq%2FgqyuTAmSlFKhtPzYM%2BtXlIdM%3D&se=2032-02-29T18%3A34%3A10Z&sp=r" +$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm-dev_3.1.3.5_amd64.deb?sv=2015-04-05&sr=b&sig=Yk%2Bg8x84m8MBFJKSVmoPAkPFR6BCqmTrGlLY89JXGe8%3D&se=2032-03-13T22%3A03%3A27Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_SAI) $(BRCM_SAI_DEV) $(BRCM_SAI_DEV)_DEPENDS += $(BRCM_SAI) diff --git a/src/sonic-sairedis b/src/sonic-sairedis index 5fee797a1d2a..8585fc84d422 160000 --- a/src/sonic-sairedis +++ b/src/sonic-sairedis @@ -1 +1 @@ -Subproject commit 5fee797a1d2ae4d4ba7d7c7ea8cc79578f5c19f5 +Subproject commit 8585fc84d422abf74d472702de7ad5ab20aa55e5 diff --git a/src/sonic-swss b/src/sonic-swss index 22bb2cdf461d..19f910864157 160000 --- a/src/sonic-swss +++ b/src/sonic-swss @@ -1 +1 @@ -Subproject commit 22bb2cdf461d7456293219fada0998acad2bfe74 +Subproject commit 19f9108641571ee38903bb4ad9fb6969a7f0437e From 7c632a903a6e14dc261f5321bbf02733af619801 Mon Sep 17 00:00:00 2001 From: pavel-shirshov Date: Sat, 7 Jul 2018 16:58:39 -0700 Subject: [PATCH 004/180] [swss]: sonic-swss submodule update (#1847) Fixes in bufferorchs ready_lists --- src/sonic-swss | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-swss b/src/sonic-swss index 19f910864157..5d31b2db4557 160000 --- a/src/sonic-swss +++ b/src/sonic-swss @@ -1 +1 @@ -Subproject commit 19f9108641571ee38903bb4ad9fb6969a7f0437e +Subproject commit 5d31b2db455763eafce8ac6fac2a137d9e3bd2c4 From 48e3e15f526c605875ebf5be916d63fcf7eadd8f Mon Sep 17 00:00:00 2001 From: lguohan Date: Sun, 8 Jul 2018 11:32:17 -0700 Subject: [PATCH 005/180] [broadcom]: update sai.mk (#1850) * Add function pointers for extended get stats API Signed-off-by: Guohan Lu --- platform/broadcom/sai.mk | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/platform/broadcom/sai.mk b/platform/broadcom/sai.mk index cd2f570f20e6..ffa6bd6182ef 100644 --- a/platform/broadcom/sai.mk +++ b/platform/broadcom/sai.mk @@ -1,9 +1,9 @@ -BRCM_SAI = libsaibcm_3.1.3.5_amd64.deb -$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm_3.1.3.5_amd64.deb?sv=2015-04-05&sr=b&sig=ui%2FF8c4fZOCqWp6KkYLvsJrJtfuWVmBCQkQWJgcyD%2FE%3D&se=2032-03-13T22%3A02%3A37Z&sp=r" +BRCM_SAI = libsaibcm_3.1.3.5-1_amd64.deb +$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm_3.1.3.5-1_amd64.deb?sv=2015-04-05&sr=b&sig=iakBOA9VRsMmdbZWDEsQNLix%2B41gnnVX75YV%2F7VGqNU%3D&se=2155-05-31T10%3A05%3A28Z&sp=r" -BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5_amd64.deb +BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5-1_amd64.deb $(eval $(call add_derived_package,$(BRCM_SAI),$(BRCM_SAI_DEV))) -$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm-dev_3.1.3.5_amd64.deb?sv=2015-04-05&sr=b&sig=Yk%2Bg8x84m8MBFJKSVmoPAkPFR6BCqmTrGlLY89JXGe8%3D&se=2032-03-13T22%3A03%3A27Z&sp=r" +$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm-dev_3.1.3.5-1_amd64.deb?sv=2015-04-05&sr=b&sig=XipVKYmbKC%2BjrKc67BPoqhXiVSU5IF6PiF37P%2BxRxMk%3D&se=2155-05-31T10%3A07%3A38Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_SAI) $(BRCM_SAI_DEV) $(BRCM_SAI_DEV)_DEPENDS += $(BRCM_SAI) From a0bd65623d2db0625277758dccf28b1897a88411 Mon Sep 17 00:00:00 2001 From: Harish Venkatraman Date: Mon, 9 Jul 2018 18:02:49 -0700 Subject: [PATCH 006/180] [device/dell] Update Shared headroom values (#1846) This commit updates the shared headroom value for z9100 T0 and T1 profile based on the ratio. The ratio is derived from the 40G broadcom recommended XL Sheet. Unit tested the above configuration by dumping the registers for the shared headroom. The shared headroom values in registers reflects the correct new values for both T1 and T0. Signed-off-by: Harish Venkatraman --- .../Force10-Z9100-T0/buffers_defaults_t0.j2 | 2 +- .../Force10-Z9100/buffers_defaults_t1.j2 | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100-T0/buffers_defaults_t0.j2 b/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100-T0/buffers_defaults_t0.j2 index 77c5761b9b30..83d99c78201b 100644 --- a/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100-T0/buffers_defaults_t0.j2 +++ b/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100-T0/buffers_defaults_t0.j2 @@ -28,7 +28,7 @@ "size": "11213696", "type": "ingress", "mode": "dynamic", - "xoff": "8356608" + "xoff": "6387264" }, "egress_lossy_pool": { "size": "9532224", diff --git a/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100/buffers_defaults_t1.j2 b/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100/buffers_defaults_t1.j2 index 5c654ab9e8a1..912f72a4c07c 100644 --- a/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100/buffers_defaults_t1.j2 +++ b/device/dell/x86_64-dell_z9100_c2538-r0/Force10-Z9100/buffers_defaults_t1.j2 @@ -14,7 +14,7 @@ "size": "10443264", "type": "ingress", "mode": "dynamic", - "xoff": "4625920" + "xoff": "7335744" }, "egress_lossy_pool": { "size": "8877440", From a6b5acb50468620cf60af0c98f98a412ebfb44b3 Mon Sep 17 00:00:00 2001 From: Andriy Moroz Date: Wed, 11 Jul 2018 18:41:29 +0300 Subject: [PATCH 007/180] [mellanox]: Update MFT tools to v4.9.0 (#1851) Signed-off-by: Andriy Moroz --- platform/mellanox/mft.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/platform/mellanox/mft.mk b/platform/mellanox/mft.mk index 1c84d3a66cd9..9f9c65ec5176 100644 --- a/platform/mellanox/mft.mk +++ b/platform/mellanox/mft.mk @@ -1,7 +1,7 @@ # Mellanox SAI -MFT_VERSION = 4.5.0 -MFT_REVISION = 31 +MFT_VERSION = 4.9.0 +MFT_REVISION = 38 export MFT_VERSION MFT_REVISION From 3d043a18e8246788e2671cd2274244683e790c80 Mon Sep 17 00:00:00 2001 From: Volodymyr Samotiy Date: Wed, 11 Jul 2018 18:42:15 +0300 Subject: [PATCH 008/180] [mellanox]: Update SAI pointer to 1.3 (#1852) Signed-off-by: Volodymyr Samotiy --- platform/mellanox/libsaithrift-dev.mk | 2 +- platform/mellanox/mlnx-sai.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/platform/mellanox/libsaithrift-dev.mk b/platform/mellanox/libsaithrift-dev.mk index e91252e5ab0e..23133a5b5aeb 100644 --- a/platform/mellanox/libsaithrift-dev.mk +++ b/platform/mellanox/libsaithrift-dev.mk @@ -1,6 +1,6 @@ # libsaithrift-dev package -LIBSAITHRIFT_DEV_MLNX = libsaithrift-dev_1.2.1_amd64.deb +LIBSAITHRIFT_DEV_MLNX = libsaithrift-dev_1.3.0_amd64.deb $(LIBSAITHRIFT_DEV_MLNX)_SRC_PATH = $(SRC_PATH)/sonic-sairedis/SAI $(LIBSAITHRIFT_DEV_MLNX)_DEPENDS += $(LIBTHRIFT) $(LIBTHRIFT_DEV) $(THRIFT_COMPILER) $(MLNX_SAI) $(MLNX_SAI_DEV) $(LIBSAITHRIFT_DEV_MLNX)_RDEPENDS += $(LIBTHRIFT) $(MLNX_SAI) diff --git a/platform/mellanox/mlnx-sai.mk b/platform/mellanox/mlnx-sai.mk index 5b2994360621..e22705a88e3a 100644 --- a/platform/mellanox/mlnx-sai.mk +++ b/platform/mellanox/mlnx-sai.mk @@ -1,7 +1,7 @@ # Mellanox SAI -MLNX_SAI_VERSION = SAIRel1.12.0-master -MLNX_SAI_REVISION = 5be04c71508e0688ae004ed838b998dba521f693 +MLNX_SAI_VERSION = SAIRel1.12.1-master +MLNX_SAI_REVISION = fe6e9d418223de9debd5348bb61af514b1df15f5 export MLNX_SAI_VERSION MLNX_SAI_REVISION From f598397b07103f9ec49103e47e4ed274bf2aa34b Mon Sep 17 00:00:00 2001 From: pavel-shirshov Date: Thu, 12 Jul 2018 01:52:19 -0700 Subject: [PATCH 009/180] Pavelsh/restart swss counters (#1854) * sonic-quagga update. Don't spam with 'Vtysh connected from' message * Restart counters in 60 seconds after manual swss restart --- files/build_templates/enable_counters.service | 3 ++- files/build_templates/enable_counters.timer | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/files/build_templates/enable_counters.service b/files/build_templates/enable_counters.service index f19249369f87..95424474cb15 100644 --- a/files/build_templates/enable_counters.service +++ b/files/build_templates/enable_counters.service @@ -1,7 +1,8 @@ [Unit] Description=Enable SONiC counters +PartOf=swss.service [Service] Type=oneshot -ExecStart=/bin/bash -c '/usr/bin/counterpoll queue enable ; /usr/bin/counterpoll port enable ; /usr/bin/pfcwd counter_poll enable' +ExecStart=/bin/bash -c 'sleep 60 ; /usr/bin/counterpoll queue enable ; /usr/bin/counterpoll port enable ; /usr/bin/pfcwd counter_poll enable' RemainAfterExit=yes diff --git a/files/build_templates/enable_counters.timer b/files/build_templates/enable_counters.timer index 7382a1658c1b..40a91525a712 100644 --- a/files/build_templates/enable_counters.timer +++ b/files/build_templates/enable_counters.timer @@ -2,7 +2,7 @@ Description=Delays the SONiC counters gathering until SONiC has started [Timer] -OnBootSec=3min +OnBootSec=2min Unit=enable_counters.service [Install] From daf590e6777b81fc06abd19baa10f2b52670267e Mon Sep 17 00:00:00 2001 From: Ying Xie Date: Thu, 12 Jul 2018 01:52:38 -0700 Subject: [PATCH 010/180] [broadcom sai] update Broadcom SDK/SAI version (#1853) Signed-off-by: Ying Xie --- platform/broadcom/sai.mk | 8 ++++---- platform/broadcom/sdk.mk | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/platform/broadcom/sai.mk b/platform/broadcom/sai.mk index ffa6bd6182ef..99f26493cd90 100644 --- a/platform/broadcom/sai.mk +++ b/platform/broadcom/sai.mk @@ -1,9 +1,9 @@ -BRCM_SAI = libsaibcm_3.1.3.5-1_amd64.deb -$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm_3.1.3.5-1_amd64.deb?sv=2015-04-05&sr=b&sig=iakBOA9VRsMmdbZWDEsQNLix%2B41gnnVX75YV%2F7VGqNU%3D&se=2155-05-31T10%3A05%3A28Z&sp=r" +BRCM_SAI = libsaibcm_3.1.3.5-2_amd64.deb +$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm_3.1.3.5-2_amd64.deb?sv=2015-04-05&sr=b&sig=wAXRViJp5SZtlHqEZVeAHZ0b%2F8Cfxw0QIjCaAigWS2s%3D&se=2032-03-19T18%3A25%3A07Z&sp=r" -BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5-1_amd64.deb +BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5-2_amd64.deb $(eval $(call add_derived_package,$(BRCM_SAI),$(BRCM_SAI_DEV))) -$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm-dev_3.1.3.5-1_amd64.deb?sv=2015-04-05&sr=b&sig=XipVKYmbKC%2BjrKc67BPoqhXiVSU5IF6PiF37P%2BxRxMk%3D&se=2155-05-31T10%3A07%3A38Z&sp=r" +$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm-dev_3.1.3.5-2_amd64.deb?sv=2015-04-05&sr=b&sig=1LqBLe%2BPNHyVmcaes21TMuZ8VoUS%2FDIuGS5Vzn9N8L4%3D&se=2032-03-19T18%3A25%3A53Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_SAI) $(BRCM_SAI_DEV) $(BRCM_SAI_DEV)_DEPENDS += $(BRCM_SAI) diff --git a/platform/broadcom/sdk.mk b/platform/broadcom/sdk.mk index 05d51fc28d07..2ffa374b1ba5 100644 --- a/platform/broadcom/sdk.mk +++ b/platform/broadcom/sdk.mk @@ -1,4 +1,4 @@ -BRCM_OPENNSL_KERNEL = opennsl-modules-3.16.0-5-amd64_3.4.1.11-2_amd64.deb -$(BRCM_OPENNSL_KERNEL)_URL = "https://sonicstorage.blob.core.windows.net/packages/opennsl-modules-3.16.0-5-amd64_3.4.1.11-2_amd64.deb?sv=2015-04-05&sr=b&sig=xtf8nafmS1pcqx5hhBsfmLNSx2BeqmwN4Dwq5uwM1bo%3D&se=2031-11-16T21%3A54%3A27Z&sp=r" +BRCM_OPENNSL_KERNEL = opennsl-modules-3.16.0-5-amd64_3.4.1.11-5_amd64.deb +$(BRCM_OPENNSL_KERNEL)_URL = "https://sonicstorage.blob.core.windows.net/packages/opennsl-modules-3.16.0-5-amd64_3.4.1.11-5_amd64.deb?sv=2015-04-05&sr=b&sig=VefDUeIdEvgV1007LX9P3aRmMAeO4hnMcIAyXkOBEp8%3D&se=2032-03-19T18%3A23%3A58Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_OPENNSL_KERNEL) From eb3ef2f7e82917a9707f5aaefdc476b930629225 Mon Sep 17 00:00:00 2001 From: lguohan Date: Thu, 12 Jul 2018 21:40:58 -0700 Subject: [PATCH 011/180] [mellanox]: fix mellanox SAI 1.3 build issue (#1859) --- platform/mellanox/python-saithrift.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platform/mellanox/python-saithrift.mk b/platform/mellanox/python-saithrift.mk index de4b02369b84..5f9d22a238c4 100644 --- a/platform/mellanox/python-saithrift.mk +++ b/platform/mellanox/python-saithrift.mk @@ -1,6 +1,6 @@ # python-saithrift package -PYTHON_SAITHRIFT_MLNX = python-saithrift_1.2.1_amd64.deb +PYTHON_SAITHRIFT_MLNX = python-saithrift_1.3.0_amd64.deb $(PYTHON_SAITHRIFT_MLNX)_SRC_PATH = $(SRC_PATH)/sonic-sairedis/SAI $(PYTHON_SAITHRIFT_MLNX)_DEPENDS += $(MLNX_SAI_DEV) $(MLNX_SAI) $(THRIFT_COMPILER) $(PYTHON_THRIFT) $(LIBTHRIFT_DEV) SONIC_DPKG_DEBS += $(PYTHON_SAITHRIFT_MLNX) From 5e6d36c2a522744a67e5780c05d86993c69fe43f Mon Sep 17 00:00:00 2001 From: lguohan Date: Fri, 13 Jul 2018 00:07:30 -0700 Subject: [PATCH 012/180] [vs]: set platform=vs for orchagent (#1860) Signed-off-by: Guohan Lu --- platform/vs/docker-sonic-vs/orchagent.sh | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/platform/vs/docker-sonic-vs/orchagent.sh b/platform/vs/docker-sonic-vs/orchagent.sh index 7e250dfa20e9..26dae28a6e15 100755 --- a/platform/vs/docker-sonic-vs/orchagent.sh +++ b/platform/vs/docker-sonic-vs/orchagent.sh @@ -1,8 +1,10 @@ #!/usr/bin/env bash +export platform=vs + MAC_ADDRESS=`ip link show eth0 | grep ether | awk '{print $2}'` -# Create a folder for SsWW record files +# Create a folder for SwSS record files mkdir -p /var/log/swss ORCHAGENT_ARGS="-d /var/log/swss " From 1a93dd548dc6d88afc3e4177984c8f3a7a5b36a7 Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Fri, 13 Jul 2018 02:18:21 -0700 Subject: [PATCH 013/180] [sonic-dbsyncd]: Support empty string in lldp_rem_port_desc (#1857) Signed-off-by: Qi Luo --- src/sonic-dbsyncd | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-dbsyncd b/src/sonic-dbsyncd index 1d0b2165e097..a091914b4e6d 160000 --- a/src/sonic-dbsyncd +++ b/src/sonic-dbsyncd @@ -1 +1 @@ -Subproject commit 1d0b2165e097ee668c8e982cf3cf413e4f2555d2 +Subproject commit a091914b4e6dd6ee85131106a1da1bdf036a5912 From 2ccfefc919edde1a454c376a13f2269c642e8a3b Mon Sep 17 00:00:00 2001 From: Joe LeVeque Date: Fri, 13 Jul 2018 10:27:47 -0700 Subject: [PATCH 014/180] [caclmgrd] Add a rule to allow all connections from localhost (#1858) --- files/image_config/caclmgrd/caclmgrd | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/files/image_config/caclmgrd/caclmgrd b/files/image_config/caclmgrd/caclmgrd index ec26b6001f50..a7ec952ca21f 100755 --- a/files/image_config/caclmgrd/caclmgrd +++ b/files/image_config/caclmgrd/caclmgrd @@ -147,6 +147,10 @@ class ControlPlaneAclManager(object): iptables_cmds.append("ip6tables -F") iptables_cmds.append("ip6tables -X") + # Add iptables commands to allow all IPv4 and IPv6 traffic from localhost + iptables_cmds.append("iptables -A INPUT -s 127.0.0.1 -i lo -j ACCEPT") + iptables_cmds.append("ip6tables -A INPUT -s ::1 -i lo -j ACCEPT") + # Get current ACL tables and rules from Config DB self._tables_db_info = self.config_db.get_table(self.ACL_TABLE) self._rules_db_info = self.config_db.get_table(self.ACL_RULE) From 2944f3e3cb6bae69ef54ac9cbd960a4509047322 Mon Sep 17 00:00:00 2001 From: lguohan Date: Fri, 13 Jul 2018 13:43:16 -0700 Subject: [PATCH 015/180] [swss]: sonic-swss submodule update (#1856) * [swss]: sonic-swss submodule update Signed-off-by: Guohan Lu * [broadcom]: update sai.mk Signed-off-by: Guohan Lu --- platform/broadcom/sai.mk | 8 ++++---- src/sonic-swss | 2 +- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/platform/broadcom/sai.mk b/platform/broadcom/sai.mk index 99f26493cd90..611592c98182 100644 --- a/platform/broadcom/sai.mk +++ b/platform/broadcom/sai.mk @@ -1,9 +1,9 @@ -BRCM_SAI = libsaibcm_3.1.3.5-2_amd64.deb -$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm_3.1.3.5-2_amd64.deb?sv=2015-04-05&sr=b&sig=wAXRViJp5SZtlHqEZVeAHZ0b%2F8Cfxw0QIjCaAigWS2s%3D&se=2032-03-19T18%3A25%3A07Z&sp=r" +BRCM_SAI = libsaibcm_3.1.3.5-3_amd64.deb +$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm_3.1.3.5-3_amd64.deb?sv=2015-04-05&sr=b&sig=lzB9IHpJuMEENr9N9W0LBFamJ7mpvRVWgigfQmpIrPc%3D&se=2155-06-05T09%3A13%3A41Z&sp=r" -BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5-2_amd64.deb +BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5-3_amd64.deb $(eval $(call add_derived_package,$(BRCM_SAI),$(BRCM_SAI_DEV))) -$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm-dev_3.1.3.5-2_amd64.deb?sv=2015-04-05&sr=b&sig=1LqBLe%2BPNHyVmcaes21TMuZ8VoUS%2FDIuGS5Vzn9N8L4%3D&se=2032-03-19T18%3A25%3A53Z&sp=r" +$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm-dev_3.1.3.5-3_amd64.deb?sv=2015-04-05&sr=b&sig=WoRAz6j8G3Xk%2BT3MOmhp5f%2BvWggw%2BgGgk2JtDJHkKjs%3D&se=2155-06-05T09%3A14%3A46Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_SAI) $(BRCM_SAI_DEV) $(BRCM_SAI_DEV)_DEPENDS += $(BRCM_SAI) diff --git a/src/sonic-swss b/src/sonic-swss index 5d31b2db4557..762e7da80142 160000 --- a/src/sonic-swss +++ b/src/sonic-swss @@ -1 +1 @@ -Subproject commit 5d31b2db455763eafce8ac6fac2a137d9e3bd2c4 +Subproject commit 762e7da80142358af0d348dea1143f38aa60a992 From 015d2d1d09044ed94568d4df4c20e5d448d3f8c1 Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Fri, 13 Jul 2018 16:58:46 -0700 Subject: [PATCH 016/180] [sonic-dbsyncd]: Fix parse_chassis on partial lldp data (#1861) --- src/sonic-dbsyncd | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-dbsyncd b/src/sonic-dbsyncd index a091914b4e6d..94f2700f67f8 160000 --- a/src/sonic-dbsyncd +++ b/src/sonic-dbsyncd @@ -1 +1 @@ -Subproject commit a091914b4e6dd6ee85131106a1da1bdf036a5912 +Subproject commit 94f2700f67f87b431c7ce45e4b9d7788707c6732 From 1955a430556afed48ad0bf87ce07f6e5b70cdfbb Mon Sep 17 00:00:00 2001 From: lguohan Date: Sat, 14 Jul 2018 15:55:58 -0700 Subject: [PATCH 017/180] [vs]: clean up process running in server namespace for vstests (#1862) Signed-off-by: Guohan Lu --- platform/vs/tests/conftest.py | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/platform/vs/tests/conftest.py b/platform/vs/tests/conftest.py index 0752b86fde1b..9256597f5e37 100644 --- a/platform/vs/tests/conftest.py +++ b/platform/vs/tests/conftest.py @@ -90,6 +90,11 @@ def __init__(self, ctn_name, pid, i): def __del__(self): if self.cleanup: + pids = subprocess.check_output("ip netns pids %s" % (self.nsname), shell=True) + if pids: + for pid in pids.split('\n'): + if len(pid) > 0: + os.system("kill %s" % int(pid)) os.system("ip netns delete %s" % self.nsname) def runcmd(self, cmd): From 00083471ec097aea0f746c7c9ac866080ddf1a70 Mon Sep 17 00:00:00 2001 From: sihuihan88 Date: Tue, 17 Jul 2018 11:13:11 -0700 Subject: [PATCH 018/180] [sonic-utilities]: update submodule (#1865) Signed-off-by: Sihui Han --- src/sonic-utilities | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-utilities b/src/sonic-utilities index 9c4c3620e4fb..4a36190b0bd7 160000 --- a/src/sonic-utilities +++ b/src/sonic-utilities @@ -1 +1 @@ -Subproject commit 9c4c3620e4fb488325e9d146c8b312ae8bb95c15 +Subproject commit 4a36190b0bd7f8e551431af6804060d5cf8ab26a From f033cbe29662d9a5f15922d60e1982ccb3e1b58a Mon Sep 17 00:00:00 2001 From: pavel-shirshov Date: Wed, 18 Jul 2018 09:38:41 -0700 Subject: [PATCH 019/180] [bcm syncd]: Wait initializing led_proc for 60 seconds (#1863) * Wait initializing led_proc for 60 seconds. bcm sdk need time to be ready accept a connection --- platform/broadcom/docker-syncd-brcm/start.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/platform/broadcom/docker-syncd-brcm/start.sh b/platform/broadcom/docker-syncd-brcm/start.sh index 4f027256a022..cc0a0948e9aa 100755 --- a/platform/broadcom/docker-syncd-brcm/start.sh +++ b/platform/broadcom/docker-syncd-brcm/start.sh @@ -34,5 +34,6 @@ wait_syncd() { # If this platform has an initialization file for the Broadcom LED microprocessor, load it if [ -r ${PLATFORM_DIR}/led_proc_init.soc ]; then wait_syncd + sleep 60 # wait until bcm sdk is ready to get a request supervisorctl start ledinit fi From c52fb762dd30a17b3181a9084ef844b3799e09ce Mon Sep 17 00:00:00 2001 From: pavel-shirshov Date: Wed, 18 Jul 2018 13:04:57 -0700 Subject: [PATCH 020/180] Convert arp_update into a 'start-it-once' mode (#1864) * Run arp_update just once, don't restart it. It will run continuosly with 5 min pauses --- dockers/docker-orchagent/supervisord.conf | 4 ++-- files/scripts/arp_update | 21 +++++++++++--------- platform/p4/docker-sonic-p4/supervisord.conf | 4 ++-- platform/vs/docker-sonic-vs/supervisord.conf | 4 ++-- 4 files changed, 18 insertions(+), 15 deletions(-) diff --git a/dockers/docker-orchagent/supervisord.conf b/dockers/docker-orchagent/supervisord.conf index 84beaed440a3..dc28e3369ca5 100644 --- a/dockers/docker-orchagent/supervisord.conf +++ b/dockers/docker-orchagent/supervisord.conf @@ -61,10 +61,10 @@ stdout_logfile=syslog stderr_logfile=syslog [program:arp_update] -command=bash -c "/usr/bin/arp_update; sleep 300" +command=/usr/bin/arp_update priority=8 autostart=false -autorestart=true +autorestart=unexpected stdout_logfile=syslog stderr_logfile=syslog diff --git a/files/scripts/arp_update b/files/scripts/arp_update index cfd87c1dc51f..ab44ca6a4580 100755 --- a/files/scripts/arp_update +++ b/files/scripts/arp_update @@ -4,14 +4,17 @@ # arp_update: Send gratuitous ARP requests to VLAN member neighbors to refresh # the neighbors state. -VLAN=`sonic-cfggen -d -v 'VLAN.keys() | join(" ") if VLAN'` -for vlan in $VLAN; do - # generate a list of arping commands: - # arping -q -w 0 -c 1 -i ; - # arping -q -w 0 -c 1 -i ; - # ... - arpingcmd="sed -e 's/ / -i /' -e 's/^/arping -q -w 0 -c 1 /' -e 's/$/;/'" - ipcmd="ip -4 neigh show | grep $vlan | cut -d ' ' -f 1,3 | $arpingcmd" +while /bin/true; do + VLAN=`sonic-cfggen -d -v 'VLAN.keys() | join(" ") if VLAN'` + for vlan in $VLAN; do + # generate a list of arping commands: + # arping -q -w 0 -c 1 -i ; + # arping -q -w 0 -c 1 -i ; + # ... + arpingcmd="sed -e 's/ / -i /' -e 's/^/arping -q -w 0 -c 1 /' -e 's/$/;/'" + ipcmd="ip -4 neigh show | grep $vlan | cut -d ' ' -f 1,3 | $arpingcmd" - eval `eval $ipcmd` + eval `eval $ipcmd` + done + sleep 300 done diff --git a/platform/p4/docker-sonic-p4/supervisord.conf b/platform/p4/docker-sonic-p4/supervisord.conf index 46178e9f11f5..5815689f9301 100644 --- a/platform/p4/docker-sonic-p4/supervisord.conf +++ b/platform/p4/docker-sonic-p4/supervisord.conf @@ -133,9 +133,9 @@ stdout_logfile=syslog stderr_logfile=syslog [program:arp_update] -command=bash -c "/usr/bin/arp_update; sleep 300" +command=/usr/bin/arp_update priority=15 autostart=false -autorestart=true +autorestart=unexpected stdout_logfile=syslog stderr_logfile=syslog diff --git a/platform/vs/docker-sonic-vs/supervisord.conf b/platform/vs/docker-sonic-vs/supervisord.conf index 571c802cda1e..a4b24334d1bd 100644 --- a/platform/vs/docker-sonic-vs/supervisord.conf +++ b/platform/vs/docker-sonic-vs/supervisord.conf @@ -116,10 +116,10 @@ stdout_logfile=syslog stderr_logfile=syslog [program:arp_update] -command=bash -c "/usr/bin/arp_update; sleep 300" +command=/usr/bin/arp_update priority=15 autostart=false -autorestart=true +autorestart=unexpected stdout_logfile=syslog stderr_logfile=syslog From 0ec932234e8f8562548afd639759893344c7f35c Mon Sep 17 00:00:00 2001 From: Wirut Getbamrung Date: Thu, 19 Jul 2018 22:04:28 +0700 Subject: [PATCH 021/180] Change dx010 console speed (#1867) --- device/celestica/x86_64-cel_seastone-r0/installer.conf | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/device/celestica/x86_64-cel_seastone-r0/installer.conf b/device/celestica/x86_64-cel_seastone-r0/installer.conf index 925a32fc0c3a..306c42218785 100644 --- a/device/celestica/x86_64-cel_seastone-r0/installer.conf +++ b/device/celestica/x86_64-cel_seastone-r0/installer.conf @@ -1,3 +1,3 @@ CONSOLE_PORT=0x3f8 CONSOLE_DEV=0 -CONSOLE_SPEED=115200 +CONSOLE_SPEED=9600 From 927c41f26cb1312db336cc2864da9c86c1b3b018 Mon Sep 17 00:00:00 2001 From: simonJi2018 <37395146+simonJi2018@users.noreply.github.com> Date: Tue, 24 Jul 2018 01:44:26 +0800 Subject: [PATCH 022/180] [nephos]: add support sai 1.3.0 (#1868) * Upgrade SAI to v1.2.4 * Add a new supported device accton as7116 * Add maintainer info for deb * Add mk file for accton 7116 * fix some bug for sai 1.2.4 * fix git commit error for sdk and sai * change sai and sdk deb name * add config file for qos support * initial commit * Delete qos.json * Delete buffers.json.j2 * Delete qos.json * Delete buffers.json.j2 * Delete buffers.json.j2 * Delete qos.json * add support for sai 1.3.0 --- .../Accton-AS7116-54X/buffers.json.j2 | 1 - .../INGRASYS-S9130-32X/buffers.json.j2 | 1 - .../INGRASYS-S9230-64X/buffers.json.j2 | 1 - platform/nephos/libsaithrift-dev.mk | 2 +- platform/nephos/python-saithrift.mk | 2 +- platform/nephos/sai.mk | 8 ++++---- platform/nephos/sdk.mk | 4 ++-- 7 files changed, 8 insertions(+), 11 deletions(-) delete mode 100644 device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers.json.j2 delete mode 100644 device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers.json.j2 delete mode 100644 device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers.json.j2 diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers.json.j2 b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers.json.j2 deleted file mode 100644 index 9e26dfeeb6e6..000000000000 --- a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers.json.j2 +++ /dev/null @@ -1 +0,0 @@ -{} \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers.json.j2 b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers.json.j2 deleted file mode 100644 index 9e26dfeeb6e6..000000000000 --- a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers.json.j2 +++ /dev/null @@ -1 +0,0 @@ -{} \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers.json.j2 b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers.json.j2 deleted file mode 100644 index 9e26dfeeb6e6..000000000000 --- a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers.json.j2 +++ /dev/null @@ -1 +0,0 @@ -{} \ No newline at end of file diff --git a/platform/nephos/libsaithrift-dev.mk b/platform/nephos/libsaithrift-dev.mk index 067a64ed72c4..8eb11bbef4aa 100644 --- a/platform/nephos/libsaithrift-dev.mk +++ b/platform/nephos/libsaithrift-dev.mk @@ -1,6 +1,6 @@ # libsaithrift-dev package -LIBSAITHRIFT_DEV_NEPHOS = libsaithrift-dev_1.2.1_amd64.deb +LIBSAITHRIFT_DEV_NEPHOS = libsaithrift-dev_1.3.0_amd64.deb $(LIBSAITHRIFT_DEV_NEPHOS)_SRC_PATH = $(SRC_PATH)/sonic-sairedis/SAI $(LIBSAITHRIFT_DEV_NEPHOS)_DEPENDS += $(LIBTHRIFT) $(LIBTHRIFT_DEV) $(THRIFT_COMPILER) $(NEPHOS_SAI) $(NEPHOS_SAI_DEV) $(LIBSAITHRIFT_DEV_NEPHOS)_RDEPENDS += $(LIBTHRIFT) $(NEPHOS_SAI) diff --git a/platform/nephos/python-saithrift.mk b/platform/nephos/python-saithrift.mk index 2eb1bbdc9b43..f9e934f6310d 100644 --- a/platform/nephos/python-saithrift.mk +++ b/platform/nephos/python-saithrift.mk @@ -1,6 +1,6 @@ # python-saithrift package -PYTHON_SAITHRIFT_NEPHOS = python-saithrift_1.2.1_amd64.deb +PYTHON_SAITHRIFT_NEPHOS = python-saithrift_1.3.0_amd64.deb $(PYTHON_SAITHRIFT_NEPHOS)_SRC_PATH = $(SRC_PATH)/sonic-sairedis/SAI $(PYTHON_SAITHRIFT_NEPHOS)_DEPENDS += $(NEPHOS_SAI_DEV) $(THRIFT_COMPILER) $(PYTHON_THRIFT) $(LIBTHRIFT_DEV) SONIC_DPKG_DEBS += $(PYTHON_SAITHRIFT_NEPHOS) diff --git a/platform/nephos/sai.mk b/platform/nephos/sai.mk index 213692d0fe6a..9bb04931ef97 100644 --- a/platform/nephos/sai.mk +++ b/platform/nephos/sai.mk @@ -1,9 +1,9 @@ -NEPHOS_SAI = libsainps_2.0.3_sai_1.2.4_d15aca_amd64.deb -$(NEPHOS_SAI)_URL = "https://github.com/NephosInc/SONiC/raw/master/sai/libsainps_2.0.3_sai_1.2.4_d15aca_amd64.deb" +NEPHOS_SAI = libsainps_2.0.3_sai_1.3.0_3147dc_amd64.deb +$(NEPHOS_SAI)_URL = "https://github.com/NephosInc/SONiC/raw/master/sai/libsainps_2.0.3_sai_1.3.0_3147dc_amd64.deb" -NEPHOS_SAI_DEV = libsainps-dev_2.0.3_sai_1.2.4_d15aca_amd64.deb +NEPHOS_SAI_DEV = libsainps-dev_2.0.3_sai_1.3.0_3147dc_amd64.deb $(eval $(call add_derived_package,$(NEPHOS_SAI),$(NEPHOS_SAI_DEV))) -$(NEPHOS_SAI_DEV)_URL = "https://github.com/NephosInc/SONiC/raw/master/sai/libsainps-dev_2.0.3_sai_1.2.4_d15aca_amd64.deb" +$(NEPHOS_SAI_DEV)_URL = "https://github.com/NephosInc/SONiC/raw/master/sai/libsainps-dev_2.0.3_sai_1.3.0_3147dc_amd64.deb" SONIC_ONLINE_DEBS += $(NEPHOS_SAI) $(NEPHOS_SAI_DEV) $(NEPHOS_SAI_DEV)_DEPENDS += $(NEPHOS_SAI) diff --git a/platform/nephos/sdk.mk b/platform/nephos/sdk.mk index 92642a19d028..ce5748745242 100644 --- a/platform/nephos/sdk.mk +++ b/platform/nephos/sdk.mk @@ -1,4 +1,4 @@ -NEPHOS_NPS_KERNEL = nps-modules-3.16.0-5_2.0.3_d15aca_amd64.deb -$(NEPHOS_NPS_KERNEL)_URL = "https://github.com/NephosInc/SONiC/raw/master/sdk/nps-modules-3.16.0-5_2.0.3_d15aca_amd64.deb" +NEPHOS_NPS_KERNEL = nps-modules-3.16.0-5_2.0.3_3147dc_amd64.deb +$(NEPHOS_NPS_KERNEL)_URL = "https://github.com/NephosInc/SONiC/raw/master/sdk/nps-modules-3.16.0-5_2.0.3_3147dc_amd64.deb" SONIC_ONLINE_DEBS += $(NEPHOS_NPS_KERNEL) From dadc17d9e6c4bebe10078171e7e565d07e909c7c Mon Sep 17 00:00:00 2001 From: Andriy Moroz Date: Tue, 24 Jul 2018 01:51:03 +0300 Subject: [PATCH 023/180] [Mellanox] Use MAC from EEPROM for PortChannels and VLAN Interfaces (#1793) * Use MAC from EEPROM for PortChannels Signed-off-by: Andriy Moroz * Use MAC from EEPROM in DEVICE_METADATA Will affect MAC for VLAN interfaces Signed-off-by: Andriy Moroz * Get MAC via decode-syseeprom Signed-off-by: Andriy Moroz * hw-management is now a service Signed-off-by: Andriy Moroz * Add error handling for MAC fetch process Signed-off-by: Andriy Moroz --- dockers/docker-teamd/start.sh | 7 ++- .../build_templates/sonic_debian_extension.j2 | 2 +- .../updategraph.service.j2} | 4 ++ platform/mellanox/.gitignore | 1 + .../Add-systemd-service-config.patch | 58 +++++++++++++++++++ platform/mellanox/hw-management/Makefile | 1 + slave.mk | 2 + src/sonic-config-engine/sonic_platform.py | 13 ++++- 8 files changed, 84 insertions(+), 4 deletions(-) rename files/{image_config/updategraph/updategraph.service => build_templates/updategraph.service.j2} (74%) create mode 100644 platform/mellanox/hw-management/Add-systemd-service-config.patch diff --git a/dockers/docker-teamd/start.sh b/dockers/docker-teamd/start.sh index 6e80f6eb9a83..fb3b7c3dadf8 100755 --- a/dockers/docker-teamd/start.sh +++ b/dockers/docker-teamd/start.sh @@ -6,7 +6,12 @@ rm -rf $TEAMD_CONF_PATH mkdir -p $TEAMD_CONF_PATH SONIC_ASIC_TYPE=$(sonic-cfggen -y /etc/sonic/sonic_version.yml -v asic_type) -MAC_ADDRESS=$(ip link show eth0 | grep ether | awk '{print $2}') + +if [ "$SONIC_ASIC_TYPE" == "mellanox" ]; then + MAC_ADDRESS=$(sonic-cfggen -d -v DEVICE_METADATA.localhost.mac) +else + MAC_ADDRESS=$(ip link show eth0 | grep ether | awk '{print $2}') +fi # Align last byte if [ "$SONIC_ASIC_TYPE" == "mellanox" -o "$SONIC_ASIC_TYPE" == "centec" ]; then diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index ad22394ff000..94be71a80935 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -162,7 +162,7 @@ sudo LANG=C chroot $FILESYSTEM_ROOT systemctl enable hostname-config.service sudo cp $IMAGE_CONFIGS/hostname/hostname-config.sh $FILESYSTEM_ROOT/usr/bin/ # Copy updategraph script and service file -sudo cp $IMAGE_CONFIGS/updategraph/updategraph.service $FILESYSTEM_ROOT/etc/systemd/system/ +j2 files/build_templates/updategraph.service.j2 | sudo tee $FILESYSTEM_ROOT/etc/systemd/system/updategraph.service sudo LANG=C chroot $FILESYSTEM_ROOT systemctl enable updategraph.service sudo cp $IMAGE_CONFIGS/updategraph/updategraph $FILESYSTEM_ROOT/usr/bin/ {% if enable_dhcp_graph_service == "y" %} diff --git a/files/image_config/updategraph/updategraph.service b/files/build_templates/updategraph.service.j2 similarity index 74% rename from files/image_config/updategraph/updategraph.service rename to files/build_templates/updategraph.service.j2 index ec478d93a132..8039f42531cd 100644 --- a/files/image_config/updategraph/updategraph.service +++ b/files/build_templates/updategraph.service.j2 @@ -3,6 +3,10 @@ Description=Update minigraph and set configuration based on minigraph After=rc-local.service After=database.service Requires=database.service +{% if sonic_asic_platform == 'mellanox' -%} +Requires=hw-management.service +{% endif -%} + [Service] Type=oneshot diff --git a/platform/mellanox/.gitignore b/platform/mellanox/.gitignore index 3c0769067437..ac1ce990d56d 100644 --- a/platform/mellanox/.gitignore +++ b/platform/mellanox/.gitignore @@ -3,6 +3,7 @@ mlnx-sai/* !mlnx-sai/Makefile hw-management/* !hw-management/Makefile +!hw-management/*.patch mft/* !mft/Makefile diff --git a/platform/mellanox/hw-management/Add-systemd-service-config.patch b/platform/mellanox/hw-management/Add-systemd-service-config.patch new file mode 100644 index 000000000000..4903f508bce6 --- /dev/null +++ b/platform/mellanox/hw-management/Add-systemd-service-config.patch @@ -0,0 +1,58 @@ +From 22fef644b1150677353ab0559828ea45a982d901 Mon Sep 17 00:00:00 2001 +From: Andriy Moroz +Date: Wed, 11 Jul 2018 16:51:07 +0300 +Subject: [PATCH] Add systemd service config + +Signed-off-by: Andriy Moroz +--- + debian/control | 2 +- + debian/hw-management.service | 10 ++++++++++ + debian/rules | 2 +- + 3 files changed, 12 insertions(+), 2 deletions(-) + create mode 100644 debian/hw-management.service + +diff --git a/debian/control b/debian/control +index 048cd61..7e3a545 100644 +--- a/debian/control ++++ b/debian/control +@@ -1,7 +1,7 @@ + Source: hw-management + Priority: extra + Maintainer: Adir Atias +-Build-Depends: ++Build-Depends: dh-systemd + Standards-Version: + Section: libs + Homepage: http://www.mellanox.com +diff --git a/debian/hw-management.service b/debian/hw-management.service +new file mode 100644 +index 0000000..d18916d +--- /dev/null ++++ b/debian/hw-management.service +@@ -0,0 +1,10 @@ ++[Unit] ++Description=Mellanox Hardware Management ++ ++[Service] ++Type=oneshot ++EnvironmentFile=/host/machine.conf ++ExecStart=/bin/bash -c "/usr/share/sonic/device/$onie_platform/hw-management start" ++ ++[Install] ++WantedBy=multi-user.target +diff --git a/debian/rules b/debian/rules +index fc38817..fba4150 100755 +--- a/debian/rules ++++ b/debian/rules +@@ -8,7 +8,7 @@ K_SRC ?= "/lib/modules/$(KVERSION)/build" + pwd=$(shell pwd) + + %: +- dh $@ ++ dh $@ --with systemd + + override_dh_auto_configure: + +-- +1.9.1 + diff --git a/platform/mellanox/hw-management/Makefile b/platform/mellanox/hw-management/Makefile index ee2899d07c39..4fa5d2cf328c 100644 --- a/platform/mellanox/hw-management/Makefile +++ b/platform/mellanox/hw-management/Makefile @@ -10,6 +10,7 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # build pushd hw-management + git am ../*.patch sed "s~@SED_VERSION@~$(MLNX_HW_MANAGEMENT_VERSION)~" -i debian/changelog chmod +x ./debian/rules sudo ./debian/rules binary KVERSION=$(KVERSION) diff --git a/slave.mk b/slave.mk index 57e09d4c74ad..a4199bb1ebb6 100644 --- a/slave.mk +++ b/slave.mk @@ -494,6 +494,8 @@ $(addprefix $(TARGET_PATH)/, $(SONIC_INSTALLERS)) : $(TARGET_PATH)/% : \ j2 -f env files/initramfs-tools/union-mount.j2 onie-image.conf > files/initramfs-tools/union-mount j2 -f env files/initramfs-tools/arista-convertfs.j2 onie-image.conf > files/initramfs-tools/arista-convertfs + j2 files/build_templates/updategraph.service.j2 > updategraph.service + $(if $($*_DOCKERS), j2 files/build_templates/sonic_debian_extension.j2 > sonic_debian_extension.sh chmod +x sonic_debian_extension.sh, diff --git a/src/sonic-config-engine/sonic_platform.py b/src/sonic-config-engine/sonic_platform.py index f573d6a6575d..55ad2325f5db 100644 --- a/src/sonic-config-engine/sonic_platform.py +++ b/src/sonic-config-engine/sonic_platform.py @@ -41,12 +41,21 @@ def get_sonic_version_info(): return data def get_system_mac(): - proc = subprocess.Popen("ip link show eth0 | grep ether | awk '{print $2}'", shell=True, stdout=subprocess.PIPE) + version_info = get_sonic_version_info() + + if (version_info['asic_type'] == 'mellanox'): + get_mac_cmd = "sudo decode-syseeprom -m" + else: + get_mac_cmd = "ip link show eth0 | grep ether | awk '{print $2}'" + + proc = subprocess.Popen(get_mac_cmd, shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE) (mac, err) = proc.communicate() + if err: + return None + mac = mac.strip() # Align last byte of MAC if necessary - version_info = get_sonic_version_info() if version_info and (version_info['asic_type'] == 'mellanox' or version_info['asic_type'] == 'centec'): last_byte = mac[-2:] aligned_last_byte = format(int(int(last_byte, 16) & 0b11000000), '02x') From 76391ba5445c82a080d2feaa13b119db7ef4016c Mon Sep 17 00:00:00 2001 From: paavaanan Date: Tue, 24 Jul 2018 10:48:59 +0530 Subject: [PATCH 024/180] [devices]: Added sensors.conf for S6100/Z9100 platform (#1788) --- device/dell/x86_64-dell_s6100_c2538-r0/sensors.conf | 9 +++++++++ device/dell/x86_64-dell_z9100_c2538-r0/sensors.conf | 12 ++++++++++++ 2 files changed, 21 insertions(+) create mode 100644 device/dell/x86_64-dell_s6100_c2538-r0/sensors.conf create mode 100644 device/dell/x86_64-dell_z9100_c2538-r0/sensors.conf diff --git a/device/dell/x86_64-dell_s6100_c2538-r0/sensors.conf b/device/dell/x86_64-dell_s6100_c2538-r0/sensors.conf new file mode 100644 index 000000000000..43fa7357c177 --- /dev/null +++ b/device/dell/x86_64-dell_s6100_c2538-r0/sensors.conf @@ -0,0 +1,9 @@ +chip "SMF_S6100_ON-isa-0000" +label power1 "PSU1 Input Power" +label power2 "PSU1 Output Power" +label power3 "PSU2 Input Power" +label power4 "PSU2 Output Power" +label temp14 "PSU1 Temp" +label temp15 "PSU1 Temp" +ignore temp12 +ignore temp13 diff --git a/device/dell/x86_64-dell_z9100_c2538-r0/sensors.conf b/device/dell/x86_64-dell_z9100_c2538-r0/sensors.conf new file mode 100644 index 000000000000..31a656fcf0b3 --- /dev/null +++ b/device/dell/x86_64-dell_z9100_c2538-r0/sensors.conf @@ -0,0 +1,12 @@ +chip "SMF_Z9100_ON-isa-0000" +label power1 "PSU1 Input Power" +label power2 "PSU1 Output Power" +label power3 "PSU2 Input Power" +label power4 "PSU2 Output Power" +label temp14 "PSU1 Temp" +label temp15 "PSU1 Temp" +ignore temp12 +ignore temp13 +ignore temp5 +ignore temp7 +ignore temp8 From 216d2fadb8ff721be95c69a632c0222d9ae1ff72 Mon Sep 17 00:00:00 2001 From: sihuihan88 Date: Mon, 23 Jul 2018 22:19:45 -0700 Subject: [PATCH 025/180] [vs-test]: not forward routes with no-export community (#1869) * Revert "Revert "[vs-test]: not forward routes with no-export community (#1774)" (#1828)" This reverts commit 6459275397eee140892f583375558c51d7e7b613. * [no-export]: move no export test under bgp folder Signed-off-by: Sihui Han * [no-export]: increase wait time to avoid random failure Signed-off-by: Sihui Han --- .../bgp/files/{ => invalid_nexthop}/bgpd.conf | 0 .../invalid_nexthop.conf | 0 .../vs/tests/bgp/files/no_export/bgpd.conf | 13 ++++++ .../vs/tests/bgp/files/no_export/exabgp1.conf | 21 +++++++++ .../vs/tests/bgp/files/no_export/exabgp2.conf | 11 +++++ platform/vs/tests/bgp/test_invalid_nexthop.py | 4 +- platform/vs/tests/bgp/test_no_export.py | 45 +++++++++++++++++++ 7 files changed, 92 insertions(+), 2 deletions(-) rename platform/vs/tests/bgp/files/{ => invalid_nexthop}/bgpd.conf (100%) rename platform/vs/tests/bgp/files/{ => invalid_nexthop}/invalid_nexthop.conf (100%) create mode 100644 platform/vs/tests/bgp/files/no_export/bgpd.conf create mode 100644 platform/vs/tests/bgp/files/no_export/exabgp1.conf create mode 100644 platform/vs/tests/bgp/files/no_export/exabgp2.conf create mode 100644 platform/vs/tests/bgp/test_no_export.py diff --git a/platform/vs/tests/bgp/files/bgpd.conf b/platform/vs/tests/bgp/files/invalid_nexthop/bgpd.conf similarity index 100% rename from platform/vs/tests/bgp/files/bgpd.conf rename to platform/vs/tests/bgp/files/invalid_nexthop/bgpd.conf diff --git a/platform/vs/tests/bgp/files/invalid_nexthop.conf b/platform/vs/tests/bgp/files/invalid_nexthop/invalid_nexthop.conf similarity index 100% rename from platform/vs/tests/bgp/files/invalid_nexthop.conf rename to platform/vs/tests/bgp/files/invalid_nexthop/invalid_nexthop.conf diff --git a/platform/vs/tests/bgp/files/no_export/bgpd.conf b/platform/vs/tests/bgp/files/no_export/bgpd.conf new file mode 100644 index 000000000000..40322cedbc69 --- /dev/null +++ b/platform/vs/tests/bgp/files/no_export/bgpd.conf @@ -0,0 +1,13 @@ +router bgp 65501 + bgp router-id 1.1.1.1 + no bgp default ipv4-unicast + neighbor 10.0.0.1 remote-as 65502 + address-family ipv4 + neighbor 10.0.0.1 activate + maximum-paths 64 + exit-address-family + neighbor 10.0.0.3 remote-as 65503 + address-family ipv4 + neighbor 10.0.0.3 activate + maximum-paths 64 + exit-address-family diff --git a/platform/vs/tests/bgp/files/no_export/exabgp1.conf b/platform/vs/tests/bgp/files/no_export/exabgp1.conf new file mode 100644 index 000000000000..0e78bd61db42 --- /dev/null +++ b/platform/vs/tests/bgp/files/no_export/exabgp1.conf @@ -0,0 +1,21 @@ +neighbor 10.0.0.0 { + router-id 1.1.1.2; + local-address 10.0.0.1; + local-as 65502; + peer-as 65501; + group-updates false; + + family{ + ipv4 unicast; + } + + static { + route 1.1.1.1/32{ + next-hop 10.0.0.1; + community no-export; + } + route 2.2.2.2/32{ + next-hop 10.0.0.1; + } + } +} diff --git a/platform/vs/tests/bgp/files/no_export/exabgp2.conf b/platform/vs/tests/bgp/files/no_export/exabgp2.conf new file mode 100644 index 000000000000..3e67c18a82f6 --- /dev/null +++ b/platform/vs/tests/bgp/files/no_export/exabgp2.conf @@ -0,0 +1,11 @@ +neighbor 10.0.0.2 { + router-id 1.1.1.3; + local-address 10.0.0.3; + local-as 65503; + peer-as 65501; + group-updates false; + + family { + ipv4 unicast; + } +} diff --git a/platform/vs/tests/bgp/test_invalid_nexthop.py b/platform/vs/tests/bgp/test_invalid_nexthop.py index cdb67337b896..b6e7cfc86e5e 100644 --- a/platform/vs/tests/bgp/test_invalid_nexthop.py +++ b/platform/vs/tests/bgp/test_invalid_nexthop.py @@ -6,7 +6,7 @@ def test_InvalidNexthop(dvs): - dvs.copy_file("/etc/quagga/", "bgp/files/bgpd.conf") + dvs.copy_file("/etc/quagga/", "bgp/files/invalid_nexthop/bgpd.conf") dvs.runcmd("supervisorctl start bgpd") dvs.runcmd("ip addr add fc00::1/126 dev Ethernet0") dvs.runcmd("ifconfig Ethernet0 up") @@ -18,7 +18,7 @@ def test_InvalidNexthop(dvs): print dvs.runcmd("supervisorctl status") - p = dvs.servers[0].runcmd_async("exabgp -d bgp/files/invalid_nexthop.conf") + p = dvs.servers[0].runcmd_async("exabgp -d bgp/files/invalid_nexthop/invalid_nexthop.conf") time.sleep(10) diff --git a/platform/vs/tests/bgp/test_no_export.py b/platform/vs/tests/bgp/test_no_export.py new file mode 100644 index 000000000000..371d5f0b29ec --- /dev/null +++ b/platform/vs/tests/bgp/test_no_export.py @@ -0,0 +1,45 @@ +from swsscommon import swsscommon +import os +import re +import time +import json + +def test_bounce(dvs): + dvs.servers[0].runcmd("pkill -f exabgp") + dvs.copy_file("/etc/quagga/", "bgp/files/no_export/bgpd.conf") + dvs.runcmd("supervisorctl start bgpd") + dvs.runcmd("ip addr add 10.0.0.0/31 dev Ethernet0") + dvs.runcmd("ifconfig Ethernet0 up") + + dvs.runcmd("ip addr add 10.0.0.2/31 dev Ethernet4") + dvs.runcmd("ifconfig Ethernet4 up") + + dvs.servers[0].runcmd("ip addr add 10.0.0.1/31 dev eth0") + dvs.servers[0].runcmd("ifconfig eth0 up") + + dvs.servers[1].runcmd("ip addr add 10.0.0.3/31 dev eth0") + dvs.servers[1].runcmd("ifconfig eth0 up") + + time.sleep(5) + + p1 = dvs.servers[0].runcmd_async("exabgp -d bgp/files/no_export/exabgp1.conf") + p2 = dvs.servers[1].runcmd_async("exabgp -d bgp/files/no_export/exabgp2.conf") + + time.sleep(60) + + sum_res = dvs.runcmd(["vtysh", "-c", "show ip bgp sum"]) + all_route = dvs.runcmd(["vtysh", "-c", "show ip bgp"]) + announce_route = dvs.runcmd(["vtysh", "-c", "show ip bgp neighbors 10.0.0.3 advertised-routes"]) + + p1.terminate() + p1 = p1.wait() + + p2.terminate() + p2 = p2.wait() + + print sum_res + print announce_route + assert "1.1.1.1/32" in all_route + assert "1.1.1.1/32" not in announce_route + assert "2.2.2.2/32" in all_route + assert "2.2.2.2/32" in announce_route From 93905d3d825a23fd055dd5fc490172e27965a87c Mon Sep 17 00:00:00 2001 From: Sagar Balani Date: Tue, 24 Jul 2018 10:23:12 -0700 Subject: [PATCH 026/180] [barefoot]: Support for platforms based on Barefoot Networks' device (#1796) * Initial commit * Add Ingrasys S9180-32X platform dirver. Signed-off-by: Wade He * Add bfn.service for init barefoot. Signed-off-by: Wade He * [Barefoot Beta] Add some functions and fixed some bugs. 1. Update sensors.conf. 2. Fixed IO expander init. 3. Fixed PSU EEPROM. 4. Fixed MB EEPROM. 5. Add fancontrol and fan init. 6. Add SYS LED control (sys, fan, fan tray). 7. 2.5V compute and setup max and min. 8. Fixed typo MB eeprom delete address. 9. Remove coretemp to BMC. 10. Add active CPLD. 11. Modify SFP+ GPIO slave address. 12. Modify tmp75 Near Port 32 slave address. Signed-off-by: Wade He * Add bfn script in /etc/init.d/ Signed-off-by: Wade He * Add bfn service in debian Signed-off-by: Wade He * Fixed CPLD switch LED behavior. Signed-off-by: Wade He * [Barefoot Beta] Fixed sensors and hwmon order. 1. Fixed ignore sensors Vbat. 2. Reorg hwmon order. Signed-off-by: Wade He * Fixed PSU1 and PSU2 EEPROM order. Signed-off-by: Wade He * initial barefoot checkin october 2017 * update refpoint * update refpoints * update refpoints to bf-master * update refpoint * update refpoint to tested version * change to platform from asic * update refpoint for swss * revert core creation setting * update refpoints * add telnet for debug shell * update refpoints 11/17/17 * missed change in file on previous merge * [CPLD] Fixed blink LED issue. * Fixed blink LED mask set error. Signed-off-by: Wade He * Update bf_kdrv.c for 6.0.2.39 * Update bf kernel driver * Add bf_fun kernel module. * Update bf_tun for fixed build error * merge with Azure master (12/12/17) * update swss refpoint * update refpoint of swss * library dependency for stack unroll * update refpoint to bf-master * [DHCP relay]: Fix circuit ID and remote ID bugs (#1248) * [DHCP relay]: Fix circuit ID and remote ID bugs * Set circuit_id_len after setting circuit_id_len to ip->name * [Platform] Add Psuutil and update sensors.conf for S9100-32X, S8810-32Q and S9200-64X (#1272) * Add I2C CPLD kernel module for psuutil. * Support psuutil script. * Add voltage min and max threshold. * Update sensors.conf for tmp75. Signed-off-by: Wade He * Allow multi platform support - infra (more changes to follow) * update relative path to include platform for clarity * [Platform] Add Ingrasys S9130-32X and S9230-64X with Nephos Switch ASIC for "branch 201712" (#1274) - What I did Add switch ASIC vendor: Nephos Add Nephos platforms: Ingrasys S9130-32X, Ingrasys S9230-64X - How I did it Add platform/nephos files Add platform/nephos/sonic-platform-modules-ingrasys submodule Add device/ingrasys/x86_64-ingrasys_s9130_32x-r0 files Add device/ingrasys/x86_64-ingrasys_s9230_64x-r0 files Add SONiC to support Nephos platform Update Head of submodule src/sonic-sairedis to "3b817bb" - How to verify it To build SONiC installer image and docker images, run the following commands: make configure PLATFORM=nephos make target/sonic-nephos.bin Check system and network feature is worked as well - Description for the changelog Add switch ASIC vendor and platforms for Nephos - A picture of a cute animal (not mandatory but encouraged) Signed-off-by: Sam Yang * change source of files to github (from dropbox), update sairedis refpoint * update refpoint of sairedis * [centec] support CENTEC SAI 1.0 on 201712 branch and update e582-48x6q board (#1269) * [marvel]: Marvell's updates for SONiC.201712 & SAI v1.0 (#1287) * update sairedis (fast-boot refpoint) * fix syncd rpc make files * update refpoint to handle Makefile change (no functional change) * [Marvell]: Add support for SLM5401-54x device (#1307) * Marvell's updates for SONiC.201712 & SAI v1.0 * [Platform] Add Marvell's SLM5401-54x for branch 201712 * [Broadcom]: Update Boradcom SAI package to 3.0.3.3-3 (#1312) (#1321) - update Arista 7050-QX32S config.bcm file - update Accton th-as771*-32x100G.config.bcm files * update refpoint for Makefile chnage in sairedis * update refpoint - sairedis * update sairedis to older refpoint till we debug clean build * export asic platform for build * update refpoint for makefiles * [PLATFORM] Centec update E582 driver fan/epprom/sensor (#1332) * Upload wnc-osw1800 * Modify for Barefoot suggest * Revert bfn-platform.mk * Update bfn-platform-wnc.mk Update parameter name * Update parameter name * initial support for WNC platform * change switch name to "switch" * Delete bf modules for rel_7_0 * Add Ingrasys S9180 platform Signed-off-by: Wade He * Modify bfnsdk for Ingrasys S9180 platform Signed-off-by: Wade He * Resolved the conflict. * Resolved the conflict. * Update submodule path and url. * Delete unused file. * Update PSU GPIO and EEPROM for psuutil. * Add psuutil in S9180-32X Signed-off-by: Wade He * update refpoint * update refpoint * change contact email, update refpoint * cleanup and update kernel modules * updates based on review * update refpoint * update refpoint * fix typo in config script to check for platforms * remove stale file * resolve conflicts * cleanup diffs with Azure repo and update SDK debs * update refpoints to Azure * address review comments * revert refpoint of swss-common * porting the build fix from master * porting build fix from master * Minor Fix * Minor fix * Temp to sde deb packages url * Update sonic - sairedis,swss & swss-common refpoints * Update git modules url path to bfn repo * updated paths for swss, swss-common & sairedis * Update refpoint for sonic-swss to local bfn repo * Update URL for downloading sde debian packages * porting fix links of debian git server from master * porting fix links of debian git server from master * [Ingrasys] Add platform support for S9280-64X with Barefoot ASIC * Update ref points for swss, swss-common and sairedis repos * Add sonic platform scripts for bfn montara/maverick * Call sh scripts instead of calling py scripts * Address upstream PR Comments (#10) * Update bf-master with azure/master * Undo changes to some files * Revert "Address upstream PR Comments (#10)" This reverts commit a7fddb83ca1073f90fbe46955ba57a9b43742c73. * Address upstream comments (#11) * Remove all non bfn specific changes from upstream PR * Revert "Address upstream comments (#11)" This reverts commit 559132103e5c73e43f4282d1559ede03f16abfea. * Undo non bfn changes * Little more cleanup * Add back code removed in merge * export CONFIGURED_PLATFORM * Update sairedis and swss refpoints * Address Upstream PR comment * change deb pkg dependency from 3.16.0-4-amd64 to 3.16.0-5-amd64 * Set default tx queue len for usb0 interface to 64 * Update sairedis refpoint * Update swss ref point * Add bfn buffer cfg files for montara/maverick as per new design * Update buffer cfg templates for bfn montara * add non zero size to buffer profile * add macro to generate port lists * Update buffer cfg templates for bfn mavericks * add non zero size for buffer profiles * add port generation macro * Add missing psmisc package * BGP docker seems to be missing killall utility being used by fast-reboot script. This is causing non graceful termination of BGP sessions. Adding psmisc to resolve this issue. * Update swss ref point * Update swss ref point * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update sairedis refpoint * Update refpoint for sairedis and swss * sairedis to azure master * swss to latest bfn bf-master * Update gitmodules Update url for sairedis to azure master * Correct typo in bfn platform script * Update swss and sairedis ref points * Update swss ref point * Address Review comments * Update swws path in gitmodules to azure master * update swss refpoint * update base docker j2 file -remove psmisc package (could be a concern, would cause fast reboot to not work correctly will fix in another PR) * Fix sairedis refpoint broken in by previous merge * Remove psmisc from docker base image * This will break fast reboot as killall is required for killing bgp process and initiating graceful termination of BGP session. Will fix this in a seperate PR. Need this for SONIC upstreaming * Address upstream comments * Remove bmc interface from interface jinja template and sample output interfaces file * Add bmc interface at boot time to network interfaces for bfn bmc based platforms * Remove autogen ingrasys debian files * Revert "Remove autogen ingrasys debian files" * Buffer and qos config template fix for bfn platforms (#21) SWI-1509 Buffer and qos config template fix for bfn platforms * Fix qos config files for montara & mavericks (#22) * Reference only ppg 3,4 in qos files as no profiles are attached to 0,1 in buffer configs * Fix vs test (#23) --- .../installer.conf | 1 + .../minigraph.xml | 1079 ++++++++ .../montara/buffers.json.j2 | 2 + .../montara/buffers_defaults_t0.j2 | 83 + .../montara/buffers_defaults_t1.j2 | 83 + .../montara/pg_profile_lookup.ini | 17 + .../montara/port_config.ini | 33 + .../montara/qos.json.j2 | 161 ++ .../montara/switch-sai.conf | 34 + .../installer.conf | 1 + .../mavericks/buffers.json.j2 | 2 + .../mavericks/buffers_defaults_t0.j2 | 83 + .../mavericks/buffers_defaults_t1.j2 | 83 + .../mavericks/pg_profile_lookup.ini | 17 + .../mavericks/port_config.ini | 66 + .../mavericks/qos.json.j2 | 161 ++ .../mavericks/switch-sai.conf | 34 + .../minigraph.xml | 1079 ++++++++ .../INGRASYS-S9180-32X/port_config.ini | 33 + .../INGRASYS-S9180-32X/switch-sai.conf | 33 + .../x86_64-ingrasys_s9180_32x-r0/fancontrol | 12 + .../installer.conf | 3 + .../minigraph.xml | 151 ++ .../plugins/eeprom.py | 22 + .../plugins/psuutil.py | 90 + .../plugins/sfputil.py | 290 ++ .../x86_64-ingrasys_s9180_32x-r0/sensors.conf | 76 + .../OSW1800-48x6q/port_config.ini | 55 + .../OSW1800-48x6q/switch-sai.conf | 33 + device/wnc/x86_64-wnc_osw1800-r0/fancontrol | 11 + .../wnc/x86_64-wnc_osw1800-r0/installer.conf | 3 + .../wnc/x86_64-wnc_osw1800-r0/minigraph.xml | 1761 ++++++++++++ .../x86_64-wnc_osw1800-r0/plugins/eeprom.py | 22 + .../x86_64-wnc_osw1800-r0/plugins/psuutil.py | 64 + .../x86_64-wnc_osw1800-r0/plugins/sfputil.py | 205 ++ device/wnc/x86_64-wnc_osw1800-r0/sensors.conf | 33 + dockers/docker-orchagent-bfn | 1 + dockers/docker-orchagent/orchagent.sh | 2 + dockers/docker-saiserver-bfn/Dockerfile | 38 + dockers/docker-saiserver-bfn/portmap.ini | 33 + dockers/docker-saiserver-bfn/profile.ini | 1 + dockers/docker-saiserver-bfn/sai_tofino.xml | 2 + dockers/docker-saiserver-bfn/start.sh | 8 + dockers/docker-saiserver-bfn/supervisord.conf | 29 + files/build_templates/buffers_config.j2 | 2 +- .../interfaces/interfaces-config.sh | 11 + files/image_config/interfaces/interfaces.j2 | 1 + platform/barefoot/bfn-platform-ingrasys.mk | 5 + platform/barefoot/bfn-platform-wnc.mk | 5 + platform/barefoot/bfn-platform.mk | 5 + platform/barefoot/bfn-sai.mk | 5 + platform/barefoot/docker-orchagent-bfn.mk | 19 + platform/barefoot/docker-ptf-bfn.mk | 5 + platform/barefoot/docker-syncd-bfn-rpc.mk | 15 + .../docker-syncd-bfn-rpc/Dockerfile.j2 | 52 + .../docker-syncd-bfn-rpc/ptf_nn_agent.conf | 10 + platform/barefoot/docker-syncd-bfn.mk | 15 + .../barefoot/docker-syncd-bfn/Dockerfile.j2 | 29 + platform/barefoot/docker-syncd-bfn/start.sh | 9 + .../docker-syncd-bfn/supervisord.conf | 29 + platform/barefoot/libsaithrift-dev.mk | 7 + platform/barefoot/one-image.mk | 11 + .../barefoot/platform-modules-bfn-montara.mk | 11 + platform/barefoot/platform-modules-bfn.mk | 11 + .../barefoot/platform-modules-ingrasys.mk | 11 + .../barefoot/platform-modules-wnc-osw1800.mk | 11 + platform/barefoot/platform.conf | 0 platform/barefoot/python-saithrift.mk | 6 + platform/barefoot/rules.mk | 23 + .../LICENSE | 15 + .../MAINTAINERS | 3 + .../README.md | 2 + .../debian/changelog | 5 + .../debian/compat | 1 + .../debian/control | 12 + .../debian/copyright | 15 + .../debian/rules | 32 + .../modules/Makefile | 1 + .../modules/bf_kdrv.c | 1 + .../modules/bf_tun.c | 1 + .../scripts/eeprom | 10 + .../scripts/fancontrol | 11 + .../scripts/ps_info | 10 + .../scripts/sensors | 12 + .../scripts/sfputil | 10 + .../scripts/test | 1 + .../sonic-platform-modules-bfn/LICENSE | 15 + .../sonic-platform-modules-bfn/MAINTAINERS | 4 + .../sonic-platform-modules-bfn/README.md | 2 + .../debian/changelog | 5 + .../sonic-platform-modules-bfn/debian/compat | 1 + .../sonic-platform-modules-bfn/debian/control | 12 + .../debian/copyright | 15 + .../sonic-platform-modules-bfn/debian/files | 1 + .../sonic-platform-modules-bfn/debian/rules | 32 + .../modules/Makefile | 2 + .../modules/bf_kdrv.c | 1254 +++++++++ .../modules/bf_tun.c | 2396 +++++++++++++++++ .../sonic-platform-modules-bfn/scripts/eeprom | 10 + .../scripts/fancontrol | 11 + .../scripts/ps_info | 10 + .../scripts/sensors | 12 + .../scripts/sfputil | 10 + .../sonic-platform-modules-bfn/scripts/test | 1 + .../.gitignore | 52 + .../sonic-platform-modules-ingrasys/LICENSE | 674 +++++ .../debian/changelog | 17 + .../debian/compat | 1 + .../debian/control | 10 + .../debian/rules | 81 + .../sonic-platform-ingrasys-s9180-32x.dirs | 4 + .../sonic-platform-ingrasys-s9180-32x.install | 4 + ...sonic-platform-ingrasys-s9180-32x.postinst | 57 + .../sonic-platform-ingrasys-s9180-32x.postrm | 42 + .../sonic-platform-ingrasys-s9180-32x.prerm | 21 + .../sonic-platform-ingrasys-s9180-32x.upstart | 7 + .../s9180-32x/README.md | 185 ++ .../s9180-32x/modules/Makefile | 1 + .../s9180-32x/modules/eeprom_mb.c | 211 ++ .../s9180-32x/service/bfn.service | 13 + .../s9180-32x/service/qsfp-monitor.service | 15 + .../service/s9180-32x-monitor.service | 19 + .../s9180-32x/utils/bfn | 44 + .../s9180-32x/utils/i2c_utils.sh | 1423 ++++++++++ .../s9180-32x/utils/qsfp_monitor.sh | 104 + .../s9180-32x/utils/s9180_32x_monitor.sh | 41 + .../LICENSE | 15 + .../MAINTAINERS | 7 + .../README.md | 2 + .../debian/changelog | 5 + .../debian/compat | 1 + .../debian/control | 12 + .../debian/copyright | 15 + .../debian/rules | 38 + .../modules/Makefile | 6 + .../modules/bf_kdrv.c | 1254 +++++++++ .../modules/bf_tun.c | 2396 +++++++++++++++++ .../modules/i2c-mcp2221.c | 611 +++++ .../modules/wnc_cpld.c | 198 ++ .../modules/wnc_cpld3.c | 200 ++ .../modules/wnc_eeprom.c | 286 ++ .../scripts/device_node.sh | 91 + .../scripts/driver_load.sh | 50 + .../scripts/test | 1 + .../service/device_node.service | 11 + .../service/driver_load.service | 10 + platform/vs/tests/conftest.py | 17 +- slave.mk | 1 + sonic-slave/Dockerfile | 5 + .../tests/sample_output/interfaces | 1 + src/sonic-sairedis | 2 +- src/sonic-swss | 2 +- src/sonic-swss-common | 2 +- 153 files changed, 18532 insertions(+), 6 deletions(-) create mode 100644 device/barefoot/x86_64-accton_wedge100bf_32x-r0/installer.conf create mode 100644 device/barefoot/x86_64-accton_wedge100bf_32x-r0/minigraph.xml create mode 100644 device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers.json.j2 create mode 100644 device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers_defaults_t0.j2 create mode 100644 device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers_defaults_t1.j2 create mode 100644 device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/pg_profile_lookup.ini create mode 100644 device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/port_config.ini create mode 100644 device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/qos.json.j2 create mode 100644 device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/switch-sai.conf create mode 100644 device/barefoot/x86_64-accton_wedge100bf_65x-r0/installer.conf create mode 100644 device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers.json.j2 create mode 100644 device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers_defaults_t0.j2 create mode 100644 device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers_defaults_t1.j2 create mode 100644 device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/pg_profile_lookup.ini create mode 100644 device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/port_config.ini create mode 100644 device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/qos.json.j2 create mode 100644 device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/switch-sai.conf create mode 100644 device/barefoot/x86_64-accton_wedge100bf_65x-r0/minigraph.xml create mode 100644 device/ingrasys/x86_64-ingrasys_s9180_32x-r0/INGRASYS-S9180-32X/port_config.ini create mode 100644 device/ingrasys/x86_64-ingrasys_s9180_32x-r0/INGRASYS-S9180-32X/switch-sai.conf create mode 100644 device/ingrasys/x86_64-ingrasys_s9180_32x-r0/fancontrol create mode 100644 device/ingrasys/x86_64-ingrasys_s9180_32x-r0/installer.conf create mode 100644 device/ingrasys/x86_64-ingrasys_s9180_32x-r0/minigraph.xml create mode 100644 device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/eeprom.py create mode 100644 device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/psuutil.py create mode 100644 device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/sfputil.py create mode 100644 device/ingrasys/x86_64-ingrasys_s9180_32x-r0/sensors.conf create mode 100644 device/wnc/x86_64-wnc_osw1800-r0/OSW1800-48x6q/port_config.ini create mode 100644 device/wnc/x86_64-wnc_osw1800-r0/OSW1800-48x6q/switch-sai.conf create mode 100644 device/wnc/x86_64-wnc_osw1800-r0/fancontrol create mode 100644 device/wnc/x86_64-wnc_osw1800-r0/installer.conf create mode 100644 device/wnc/x86_64-wnc_osw1800-r0/minigraph.xml create mode 100644 device/wnc/x86_64-wnc_osw1800-r0/plugins/eeprom.py create mode 100644 device/wnc/x86_64-wnc_osw1800-r0/plugins/psuutil.py create mode 100644 device/wnc/x86_64-wnc_osw1800-r0/plugins/sfputil.py create mode 100644 device/wnc/x86_64-wnc_osw1800-r0/sensors.conf create mode 120000 dockers/docker-orchagent-bfn create mode 100755 dockers/docker-saiserver-bfn/Dockerfile create mode 100644 dockers/docker-saiserver-bfn/portmap.ini create mode 100644 dockers/docker-saiserver-bfn/profile.ini create mode 100644 dockers/docker-saiserver-bfn/sai_tofino.xml create mode 100755 dockers/docker-saiserver-bfn/start.sh create mode 100644 dockers/docker-saiserver-bfn/supervisord.conf create mode 100644 platform/barefoot/bfn-platform-ingrasys.mk create mode 100644 platform/barefoot/bfn-platform-wnc.mk create mode 100644 platform/barefoot/bfn-platform.mk create mode 100644 platform/barefoot/bfn-sai.mk create mode 100644 platform/barefoot/docker-orchagent-bfn.mk create mode 100644 platform/barefoot/docker-ptf-bfn.mk create mode 100644 platform/barefoot/docker-syncd-bfn-rpc.mk create mode 100644 platform/barefoot/docker-syncd-bfn-rpc/Dockerfile.j2 create mode 100644 platform/barefoot/docker-syncd-bfn-rpc/ptf_nn_agent.conf create mode 100644 platform/barefoot/docker-syncd-bfn.mk create mode 100755 platform/barefoot/docker-syncd-bfn/Dockerfile.j2 create mode 100755 platform/barefoot/docker-syncd-bfn/start.sh create mode 100644 platform/barefoot/docker-syncd-bfn/supervisord.conf create mode 100644 platform/barefoot/libsaithrift-dev.mk create mode 100644 platform/barefoot/one-image.mk create mode 100644 platform/barefoot/platform-modules-bfn-montara.mk create mode 100644 platform/barefoot/platform-modules-bfn.mk create mode 100644 platform/barefoot/platform-modules-ingrasys.mk create mode 100644 platform/barefoot/platform-modules-wnc-osw1800.mk create mode 100644 platform/barefoot/platform.conf create mode 100644 platform/barefoot/python-saithrift.mk create mode 100644 platform/barefoot/rules.mk create mode 100644 platform/barefoot/sonic-platform-modules-bfn-montara/LICENSE create mode 100644 platform/barefoot/sonic-platform-modules-bfn-montara/MAINTAINERS create mode 100644 platform/barefoot/sonic-platform-modules-bfn-montara/README.md create mode 100644 platform/barefoot/sonic-platform-modules-bfn-montara/debian/changelog create mode 100644 platform/barefoot/sonic-platform-modules-bfn-montara/debian/compat create mode 100644 platform/barefoot/sonic-platform-modules-bfn-montara/debian/control create mode 100644 platform/barefoot/sonic-platform-modules-bfn-montara/debian/copyright create mode 100755 platform/barefoot/sonic-platform-modules-bfn-montara/debian/rules create mode 120000 platform/barefoot/sonic-platform-modules-bfn-montara/modules/Makefile create mode 120000 platform/barefoot/sonic-platform-modules-bfn-montara/modules/bf_kdrv.c create mode 120000 platform/barefoot/sonic-platform-modules-bfn-montara/modules/bf_tun.c create mode 100755 platform/barefoot/sonic-platform-modules-bfn-montara/scripts/eeprom create mode 100755 platform/barefoot/sonic-platform-modules-bfn-montara/scripts/fancontrol create mode 100755 platform/barefoot/sonic-platform-modules-bfn-montara/scripts/ps_info create mode 100755 platform/barefoot/sonic-platform-modules-bfn-montara/scripts/sensors create mode 100755 platform/barefoot/sonic-platform-modules-bfn-montara/scripts/sfputil create mode 100755 platform/barefoot/sonic-platform-modules-bfn-montara/scripts/test create mode 100644 platform/barefoot/sonic-platform-modules-bfn/LICENSE create mode 100644 platform/barefoot/sonic-platform-modules-bfn/MAINTAINERS create mode 100644 platform/barefoot/sonic-platform-modules-bfn/README.md create mode 100644 platform/barefoot/sonic-platform-modules-bfn/debian/changelog create mode 100644 platform/barefoot/sonic-platform-modules-bfn/debian/compat create mode 100644 platform/barefoot/sonic-platform-modules-bfn/debian/control create mode 100644 platform/barefoot/sonic-platform-modules-bfn/debian/copyright create mode 100644 platform/barefoot/sonic-platform-modules-bfn/debian/files create mode 100755 platform/barefoot/sonic-platform-modules-bfn/debian/rules create mode 100644 platform/barefoot/sonic-platform-modules-bfn/modules/Makefile create mode 100644 platform/barefoot/sonic-platform-modules-bfn/modules/bf_kdrv.c create mode 100644 platform/barefoot/sonic-platform-modules-bfn/modules/bf_tun.c create mode 100755 platform/barefoot/sonic-platform-modules-bfn/scripts/eeprom create mode 100755 platform/barefoot/sonic-platform-modules-bfn/scripts/fancontrol create mode 100755 platform/barefoot/sonic-platform-modules-bfn/scripts/ps_info create mode 100755 platform/barefoot/sonic-platform-modules-bfn/scripts/sensors create mode 100755 platform/barefoot/sonic-platform-modules-bfn/scripts/sfputil create mode 100755 platform/barefoot/sonic-platform-modules-bfn/scripts/test create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/.gitignore create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/LICENSE create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/changelog create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/compat create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/control create mode 100755 platform/barefoot/sonic-platform-modules-ingrasys/debian/rules create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.dirs create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.install create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postinst create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postrm create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.prerm create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.upstart create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/README.md create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/Makefile create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/eeprom_mb.c create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/bfn.service create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/qsfp-monitor.service create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/s9180-32x-monitor.service create mode 100755 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/bfn create mode 100755 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh create mode 100755 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/qsfp_monitor.sh create mode 100755 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/s9180_32x_monitor.sh create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/LICENSE create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/MAINTAINERS create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/README.md create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/changelog create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/compat create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/control create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/copyright create mode 100755 platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/rules create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/Makefile create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/bf_kdrv.c create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/bf_tun.c create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/i2c-mcp2221.c create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_cpld.c create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_cpld3.c create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_eeprom.c create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/device_node.sh create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/driver_load.sh create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/test create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/service/device_node.service create mode 100644 platform/barefoot/sonic-platform-modules-wnc-osw1800/service/driver_load.service diff --git a/device/barefoot/x86_64-accton_wedge100bf_32x-r0/installer.conf b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/installer.conf new file mode 100644 index 000000000000..3714ff053bb0 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/installer.conf @@ -0,0 +1 @@ +CONSOLE_SPEED=57600 diff --git a/device/barefoot/x86_64-accton_wedge100bf_32x-r0/minigraph.xml b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/minigraph.xml new file mode 100644 index 000000000000..60d93ad69d66 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/minigraph.xml @@ -0,0 +1,1079 @@ + + + + + + ARISTA01T0 + 10.0.0.33 + switch + 10.0.0.32 + 1 + 180 + 60 + + + switch + 10.0.0.0 + ARISTA01T2 + 10.0.0.1 + 1 + 180 + 60 + + + ARISTA02T0 + 10.0.0.35 + switch + 10.0.0.34 + 1 + 180 + 60 + + + switch + 10.0.0.2 + ARISTA02T2 + 10.0.0.3 + 1 + 180 + 60 + + + ARISTA03T0 + 10.0.0.37 + switch + 10.0.0.36 + 1 + 180 + 60 + + + switch + 10.0.0.4 + ARISTA03T2 + 10.0.0.5 + 1 + 180 + 60 + + + ARISTA04T0 + 10.0.0.39 + switch + 10.0.0.38 + 1 + 180 + 60 + + + switch + 10.0.0.6 + ARISTA04T2 + 10.0.0.7 + 1 + 180 + 60 + + + ARISTA05T0 + 10.0.0.41 + switch + 10.0.0.40 + 1 + 180 + 60 + + + switch + 10.0.0.8 + ARISTA05T2 + 10.0.0.9 + 1 + 180 + 60 + + + ARISTA06T0 + 10.0.0.43 + switch + 10.0.0.42 + 1 + 180 + 60 + + + switch + 10.0.0.10 + ARISTA06T2 + 10.0.0.11 + 1 + 180 + 60 + + + ARISTA07T0 + 10.0.0.45 + switch + 10.0.0.44 + 1 + 180 + 60 + + + switch + 10.0.0.12 + ARISTA07T2 + 10.0.0.13 + 1 + 180 + 60 + + + ARISTA08T0 + 10.0.0.47 + switch + 10.0.0.46 + 1 + 180 + 60 + + + switch + 10.0.0.14 + ARISTA08T2 + 10.0.0.15 + 1 + 180 + 60 + + + ARISTA09T0 + 10.0.0.49 + switch + 10.0.0.48 + 1 + 180 + 60 + + + switch + 10.0.0.16 + ARISTA09T2 + 10.0.0.17 + 1 + 180 + 60 + + + ARISTA10T0 + 10.0.0.51 + switch + 10.0.0.50 + 1 + 180 + 60 + + + switch + 10.0.0.18 + ARISTA10T2 + 10.0.0.19 + 1 + 180 + 60 + + + ARISTA11T0 + 10.0.0.53 + switch + 10.0.0.52 + 1 + 180 + 60 + + + switch + 10.0.0.20 + ARISTA11T2 + 10.0.0.21 + 1 + 180 + 60 + + + ARISTA12T0 + 10.0.0.55 + switch + 10.0.0.54 + 1 + 180 + 60 + + + switch + 10.0.0.22 + ARISTA12T2 + 10.0.0.23 + 1 + 180 + 60 + + + ARISTA13T0 + 10.0.0.57 + switch + 10.0.0.56 + 1 + 180 + 60 + + + switch + 10.0.0.24 + ARISTA13T2 + 10.0.0.25 + 1 + 180 + 60 + + + ARISTA14T0 + 10.0.0.59 + switch + 10.0.0.58 + 1 + 180 + 60 + + + switch + 10.0.0.26 + ARISTA14T2 + 10.0.0.27 + 1 + 180 + 60 + + + ARISTA15T0 + 10.0.0.61 + switch + 10.0.0.60 + 1 + 180 + 60 + + + switch + 10.0.0.28 + ARISTA15T2 + 10.0.0.29 + 1 + 180 + 60 + + + ARISTA16T0 + 10.0.0.63 + switch + 10.0.0.62 + 1 + 180 + 60 + + + switch + 10.0.0.30 + ARISTA16T2 + 10.0.0.31 + 1 + 180 + 60 + + + + + 65100 + switch + + +
10.0.0.33
+ + + + +
10.0.0.1
+ + + + +
10.0.0.35
+ + + + +
10.0.0.3
+ + + + +
10.0.0.37
+ + + + +
10.0.0.5
+ + + + +
10.0.0.39
+ + + + +
10.0.0.7
+ + + + +
10.0.0.41
+ + + + +
10.0.0.9
+ + + + +
10.0.0.43
+ + + + +
10.0.0.11
+ + + + +
10.0.0.45
+ + + + +
10.0.0.13
+ + + + +
10.0.0.47
+ + + + +
10.0.0.15
+ + + + +
10.0.0.49
+ + + + +
10.0.0.17
+ + + + +
10.0.0.51
+ + + + +
10.0.0.19
+ + + + +
10.0.0.53
+ + + + +
10.0.0.21
+ + + + +
10.0.0.55
+ + + + +
10.0.0.23
+ + + + +
10.0.0.57
+ + + + +
10.0.0.25
+ + + + +
10.0.0.59
+ + + + +
10.0.0.27
+ + + + +
10.0.0.61
+ + + + +
10.0.0.29
+ + + + +
10.0.0.63
+ + + + +
10.0.0.31
+ + + + + + + + 64001 + ARISTA01T0 + + + + 65200 + ARISTA01T2 + + + + 64002 + ARISTA02T0 + + + + 65200 + ARISTA02T2 + + + + 64003 + ARISTA03T0 + + + + 65200 + ARISTA03T2 + + + + 64004 + ARISTA04T0 + + + + 65200 + ARISTA04T2 + + + + 64005 + ARISTA05T0 + + + + 65200 + ARISTA05T2 + + + + 64006 + ARISTA06T0 + + + + 65200 + ARISTA06T2 + + + + 64007 + ARISTA07T0 + + + + 65200 + ARISTA07T2 + + + + 64008 + ARISTA08T0 + + + + 65200 + ARISTA08T2 + + + + 64009 + ARISTA09T0 + + + + 65200 + ARISTA09T2 + + + + 64010 + ARISTA10T0 + + + + 65200 + ARISTA10T2 + + + + 64011 + ARISTA11T0 + + + + 65200 + ARISTA11T2 + + + + 64012 + ARISTA12T0 + + + + 65200 + ARISTA12T2 + + + + 64013 + ARISTA13T0 + + + + 65200 + ARISTA13T2 + + + + 64014 + ARISTA14T0 + + + + 65200 + ARISTA14T2 + + + + 64015 + ARISTA15T0 + + + + 65200 + ARISTA15T2 + + + + 64016 + ARISTA16T0 + + + + 65200 + ARISTA16T2 + + + + + + + + + + HostIP + Loopback0 + + 10.1.0.32/32 + + 10.1.0.32/32 + + + + + + + + switch + + + + + + Ethernet0 + 10.0.0.0/31 + + + + Ethernet4 + 10.0.0.2/31 + + + + Ethernet8 + 10.0.0.4/31 + + + + Ethernet12 + 10.0.0.6/31 + + + + Ethernet16 + 10.0.0.8/31 + + + + Ethernet20 + 10.0.0.10/31 + + + + Ethernet24 + 10.0.0.12/31 + + + + Ethernet28 + 10.0.0.14/31 + + + + Ethernet32 + 10.0.0.16/31 + + + + Ethernet36 + 10.0.0.18/31 + + + + Ethernet40 + 10.0.0.20/31 + + + + Ethernet44 + 10.0.0.22/31 + + + + Ethernet48 + 10.0.0.24/31 + + + + Ethernet52 + 10.0.0.26/31 + + + + Ethernet56 + 10.0.0.28/31 + + + + Ethernet60 + 10.0.0.30/31 + + + + Ethernet64 + 10.0.0.32/31 + + + + Ethernet68 + 10.0.0.34/31 + + + + Ethernet72 + 10.0.0.36/31 + + + + Ethernet76 + 10.0.0.38/31 + + + + Ethernet80 + 10.0.0.40/31 + + + + Ethernet84 + 10.0.0.42/31 + + + + Ethernet88 + 10.0.0.44/31 + + + + Ethernet92 + 10.0.0.46/31 + + + + Ethernet96 + 10.0.0.48/31 + + + + Ethernet100 + 10.0.0.50/31 + + + + Ethernet104 + 10.0.0.52/31 + + + + Ethernet108 + 10.0.0.54/31 + + + + Ethernet112 + 10.0.0.56/31 + + + + Ethernet116 + 10.0.0.58/31 + + + + Ethernet120 + 10.0.0.60/31 + + + + Ethernet124 + 10.0.0.62/31 + + + + + + + + + + + + DeviceInterfaceLink + switch + Ethernet0 + ARISTA01T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet4 + ARISTA02T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet8 + ARISTA03T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet12 + ARISTA04T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet16 + ARISTA05T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet20 + ARISTA06T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet24 + ARISTA07T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet28 + ARISTA08T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet32 + ARISTA09T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet36 + ARISTA10T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet40 + ARISTA11T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet44 + ARISTA12T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet48 + ARISTA13T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet52 + ARISTA14T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet56 + ARISTA15T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet60 + ARISTA16T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet64 + ARISTA01T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet68 + ARISTA02T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet72 + ARISTA03T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet76 + ARISTA04T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet80 + ARISTA05T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet84 + ARISTA06T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet88 + ARISTA07T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet92 + ARISTA08T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet96 + ARISTA09T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet100 + ARISTA10T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet104 + ARISTA11T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet108 + ARISTA12T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet112 + ARISTA13T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet116 + ARISTA14T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet120 + ARISTA15T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet124 + ARISTA16T0 + Ethernet1 + + + + + switch + montara + + ` + + + + + switch + + + DhcpResources + + + + + NtpResources + + 0.debian.pool.ntp.org;1.debian.pool.ntp.org;2.debian.pool.ntp.org;3.debian.pool.ntp.org + + + SyslogResources + + + + + ErspanDestinationIpv4 + + 2.2.2.2 + + + + + + + switch + montara + diff --git a/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers.json.j2 b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers.json.j2 new file mode 100644 index 000000000000..1083a6210fc9 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers.json.j2 @@ -0,0 +1,2 @@ +{%- set default_topo = 't0' %} +{%- include 'buffers_config.j2' %} diff --git a/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers_defaults_t0.j2 b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers_defaults_t0.j2 new file mode 100644 index 000000000000..73e95a457a2a --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers_defaults_t0.j2 @@ -0,0 +1,83 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '4194304' %} +{% set ingress_lossy_pool_size = '7340032' %} +{% set egress_lossless_pool_size = '16777152' %} +{% set egress_lossy_pool_size = '7340032' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0,32) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx * 4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "size":"4096", + "dynamic_th":"0" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + }, + "egress_lossless_profile": { + "pool":"[BUFFER_POOL|egress_lossless_pool]", + "size":"4096", + "dynamic_th":"7" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + }, + "q_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + } + }, +{%- endmacro %} + +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + "{{ port_names }}|3-4": { + "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]" + } + }, +{%- endmacro %} + +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + "{{ port_names }}|3-4": { + "profile" : "[BUFFER_PROFILE|egress_lossless_profile]" + }, + "{{ port_names }}|0-1": { + "profile" : "[BUFFER_PROFILE|q_lossy_profile]" + } + } +{%- endmacro %} diff --git a/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers_defaults_t1.j2 b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers_defaults_t1.j2 new file mode 100644 index 000000000000..fce82ea2edf5 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/buffers_defaults_t1.j2 @@ -0,0 +1,83 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '2097152' %} +{% set ingress_lossy_pool_size = '5242880' %} +{% set egress_lossless_pool_size = '16777152' %} +{% set egress_lossy_pool_size = '5242880' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0,32) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx * 4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "size":"4096", + "dynamic_th":"0" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + }, + "egress_lossless_profile": { + "pool":"[BUFFER_POOL|egress_lossless_pool]", + "size":"4096", + "dynamic_th":"7" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + }, + "q_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + } + }, +{%- endmacro %} + +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + "{{ port_names }}|3-4": { + "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]" + } + }, +{%- endmacro %} + +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + "{{ port_names }}|3-4": { + "profile" : "[BUFFER_PROFILE|egress_lossless_profile]" + }, + "{{ port_names }}|0-1": { + "profile" : "[BUFFER_PROFILE|q_lossy_profile]" + } + } +{%- endmacro %} diff --git a/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/pg_profile_lookup.ini b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/pg_profile_lookup.ini new file mode 100644 index 000000000000..b66b129fe43f --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/pg_profile_lookup.ini @@ -0,0 +1,17 @@ +# PG lossless profiles. +# speed cable size xon xoff threshold + 10000 5m 34816 18432 16384 0 + 25000 5m 34816 18432 16384 0 + 40000 5m 34816 18432 16384 0 + 50000 5m 34816 18432 16384 0 + 100000 5m 36864 18432 18432 0 + 10000 40m 36864 18432 18432 0 + 25000 40m 39936 18432 21504 0 + 40000 40m 41984 18432 23552 0 + 50000 40m 41984 18432 23552 0 + 100000 40m 54272 18432 35840 0 + 10000 300m 49152 18432 30720 0 + 25000 300m 71680 18432 53248 0 + 40000 300m 94208 18432 75776 0 + 50000 300m 94208 18432 75776 0 + 100000 300m 184320 18432 165888 0 diff --git a/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/port_config.ini b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/port_config.ini new file mode 100644 index 000000000000..816bb0e94a70 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/port_config.ini @@ -0,0 +1,33 @@ +# name lanes +Ethernet0 0,1,2,3 +Ethernet4 4,5,6,7 +Ethernet8 8,9,10,11 +Ethernet12 12,13,14,15 +Ethernet16 16,17,18,19 +Ethernet20 20,21,22,23 +Ethernet24 24,25,26,27 +Ethernet28 28,29,30,31 +Ethernet32 32,33,34,35 +Ethernet36 36,37,38,39 +Ethernet40 40,41,42,43 +Ethernet44 44,45,46,47 +Ethernet48 48,49,50,51 +Ethernet52 52,53,54,55 +Ethernet56 56,57,58,59 +Ethernet60 60,61,62,63 +Ethernet64 64,65,66,67 +Ethernet68 68,69,70,71 +Ethernet72 72,73,74,75 +Ethernet76 76,77,78,79 +Ethernet80 80,81,82,83 +Ethernet84 84,85,86,87 +Ethernet88 88,89,90,91 +Ethernet92 92,93,94,95 +Ethernet96 96,97,98,99 +Ethernet100 100,101,102,103 +Ethernet104 104,105,106,107 +Ethernet108 108,109,110,111 +Ethernet112 112,113,114,115 +Ethernet116 116,117,118,119 +Ethernet120 120,121,122,123 +Ethernet124 124,125,126,127 diff --git a/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/qos.json.j2 b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/qos.json.j2 new file mode 100644 index 000000000000..7b8732e2e125 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/qos.json.j2 @@ -0,0 +1,161 @@ +{ + "TC_TO_PRIORITY_GROUP_MAP": { + "AZURE": { + "3": "3", + "4": "4" + } + }, + "MAP_PFC_PRIORITY_TO_QUEUE": { + "AZURE": { + "0": "0", + "1": "1", + "3": "3", + "4": "4" + } + }, + "TC_TO_QUEUE_MAP": { + "AZURE": { + "0": "0", + "1": "1", + "3": "3", + "4": "4" + } + }, + "DSCP_TO_TC_MAP": { + "AZURE": { + "0":"0", + "1":"0", + "2":"0", + "3":"3", + "4":"4", + "5":"0", + "6":"0", + "7":"0", + "8":"1", + "9":"0", + "10":"0", + "11":"0", + "12":"0", + "13":"0", + "14":"0", + "15":"0", + "16":"0", + "17":"0", + "18":"0", + "19":"0", + "20":"0", + "21":"0", + "22":"0", + "23":"0", + "24":"0", + "25":"0", + "26":"0", + "27":"0", + "28":"0", + "29":"0", + "30":"0", + "31":"0", + "32":"0", + "33":"0", + "34":"0", + "35":"0", + "36":"0", + "37":"0", + "38":"0", + "39":"0", + "40":"0", + "41":"0", + "42":"0", + "43":"0", + "44":"0", + "45":"0", + "46":"0", + "47":"0", + "48":"0", + "49":"0", + "50":"0", + "51":"0", + "52":"0", + "53":"0", + "54":"0", + "55":"0", + "56":"0", + "57":"0", + "58":"0", + "59":"0", + "60":"0", + "61":"0", + "62":"0", + "63":"0" + } + }, + "SCHEDULER": { + "scheduler.0": { + "type":"DWRR", + "weight": "25" + }, + "scheduler.1": { + "type":"DWRR", + "weight": "30" + }, + "scheduler.2": { + "type":"DWRR", + "weight": "20" + } + }, + "PFC_PRIORITY_TO_PRIORITY_GROUP_MAP": { + "AZURE": { + "3": "3", + "4": "4" + } + }, + "PORT_QOS_MAP": { + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124": { + "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", + "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", + "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", + "pfc_to_queue_map": "[MAP_PFC_PRIORITY_TO_QUEUE|AZURE]", + "pfc_to_pg_map" : "[PFC_PRIORITY_TO_PRIORITY_GROUP_MAP|AZURE]", + "pfc_enable": "3,4" + } + }, + "WRED_PROFILE": { + "AZURE_LOSSY": { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"516096", + "red_min_threshold":"516096", + "yellow_max_threshold":"516096", + "yellow_min_threshold":"516096", + "green_max_threshold": "184320", + "green_min_threshold": "184320" + }, + "AZURE_LOSSLESS": { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"516096", + "red_min_threshold":"516096", + "yellow_max_threshold":"516096", + "yellow_min_threshold":"516096", + "green_max_threshold": "184320", + "green_min_threshold": "184320" + } + }, + "QUEUE": { + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0": { + "scheduler" : "[SCHEDULER|scheduler.1]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|1": { + "scheduler" : "[SCHEDULER|scheduler.2]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0-1": { + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|3-4": { + "scheduler" : "[SCHEDULER|scheduler.0]", + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + } + } +} diff --git a/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/switch-sai.conf b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/switch-sai.conf new file mode 100644 index 000000000000..089153b6a5ce --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_32x-r0/montara/switch-sai.conf @@ -0,0 +1,34 @@ +{ + "chip_list": [ + { + "id": "asic-0", + "chip_family": "Tofino", + "instance": 0, + "pcie_sysfs_prefix": "/sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0", + "pcie_domain": 0, + "pcie_bus": 5, + "pcie_fn": 0, + "pcie_dev": 0, + "pcie_int_mode": 1, + "sds_fw_path": "share/tofino_sds_fw/avago/firmware" + } + ], + "instance": 0, + "p4_program_list": [ + { + "id": "pgm-0", + "instance": 0, + "path": "switch", + "program-name": "switch", + "pd": "lib/tofinopd/switch/libpd.so", + "pd-thrift": "lib/tofinopd/switch/libpdthrift.so", + "table-config": "share/tofinopd/switch/context.json", + "tofino-bin": "share/tofinopd/switch/tofino.bin", + "switchapi": "lib/libswitchapi.so", + "switchsai": "lib/libswitchsai.so", + "agent0": "lib/platform/x86_64-accton_wedge100bf_32x-r0/libpltfm_mgr.so", + "switchapi_port_add": false, + "non_default_port_ppgs": 5 + } + ] +} diff --git a/device/barefoot/x86_64-accton_wedge100bf_65x-r0/installer.conf b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/installer.conf new file mode 100644 index 000000000000..3714ff053bb0 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/installer.conf @@ -0,0 +1 @@ +CONSOLE_SPEED=57600 diff --git a/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers.json.j2 b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers.json.j2 new file mode 100644 index 000000000000..1083a6210fc9 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers.json.j2 @@ -0,0 +1,2 @@ +{%- set default_topo = 't0' %} +{%- include 'buffers_config.j2' %} diff --git a/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers_defaults_t0.j2 b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers_defaults_t0.j2 new file mode 100644 index 000000000000..e5b949faed00 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers_defaults_t0.j2 @@ -0,0 +1,83 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '4194304' %} +{% set ingress_lossy_pool_size = '7340032' %} +{% set egress_lossless_pool_size = '16777152' %} +{% set egress_lossy_pool_size = '7340032' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0,64) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx * 4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "size":"4096", + "dynamic_th":"0" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + }, + "egress_lossless_profile": { + "pool":"[BUFFER_POOL|egress_lossless_pool]", + "size":"4096", + "dynamic_th":"7" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + }, + "q_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + } + }, +{%- endmacro %} + +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + "{{ port_names }}|3-4": { + "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]" + } + }, +{%- endmacro %} + +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + "{{ port_names }}|3-4": { + "profile" : "[BUFFER_PROFILE|egress_lossless_profile]" + }, + "{{ port_names }}|0-1": { + "profile" : "[BUFFER_PROFILE|q_lossy_profile]" + } + } +{%- endmacro %} diff --git a/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers_defaults_t1.j2 b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers_defaults_t1.j2 new file mode 100644 index 000000000000..1d8096c0d6cc --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/buffers_defaults_t1.j2 @@ -0,0 +1,83 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '2097152' %} +{% set ingress_lossy_pool_size = '5242880' %} +{% set egress_lossless_pool_size = '16777152' %} +{% set egress_lossy_pool_size = '5242880' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0,64) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx * 4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "size":"4096", + "dynamic_th":"0" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + }, + "egress_lossless_profile": { + "pool":"[BUFFER_POOL|egress_lossless_pool]", + "size":"4096", + "dynamic_th":"7" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + }, + "q_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"4096", + "dynamic_th":"3" + } + }, +{%- endmacro %} + +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + "{{ port_names }}|3-4": { + "profile" : "[BUFFER_PROFILE|ingress_lossless_profile]" + } + }, +{%- endmacro %} + +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + "{{ port_names }}|3-4": { + "profile" : "[BUFFER_PROFILE|egress_lossless_profile]" + }, + "{{ port_names }}|0-1": { + "profile" : "[BUFFER_PROFILE|q_lossy_profile]" + } + } +{%- endmacro %} diff --git a/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/pg_profile_lookup.ini b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/pg_profile_lookup.ini new file mode 100644 index 000000000000..b66b129fe43f --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/pg_profile_lookup.ini @@ -0,0 +1,17 @@ +# PG lossless profiles. +# speed cable size xon xoff threshold + 10000 5m 34816 18432 16384 0 + 25000 5m 34816 18432 16384 0 + 40000 5m 34816 18432 16384 0 + 50000 5m 34816 18432 16384 0 + 100000 5m 36864 18432 18432 0 + 10000 40m 36864 18432 18432 0 + 25000 40m 39936 18432 21504 0 + 40000 40m 41984 18432 23552 0 + 50000 40m 41984 18432 23552 0 + 100000 40m 54272 18432 35840 0 + 10000 300m 49152 18432 30720 0 + 25000 300m 71680 18432 53248 0 + 40000 300m 94208 18432 75776 0 + 50000 300m 94208 18432 75776 0 + 100000 300m 184320 18432 165888 0 diff --git a/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/port_config.ini b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/port_config.ini new file mode 100644 index 000000000000..c1001741d28a --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/port_config.ini @@ -0,0 +1,66 @@ +# name lanes +Ethernet0 0,1,2,3 +Ethernet4 4,5,6,7 +Ethernet8 8,9,10,11 +Ethernet12 12,13,14,15 +Ethernet16 16,17,18,19 +Ethernet20 20,21,22,23 +Ethernet24 24,25,26,27 +Ethernet28 28,29,30,31 +Ethernet32 32,33,34,35 +Ethernet36 36,37,38,39 +Ethernet40 40,41,42,43 +Ethernet44 44,45,46,47 +Ethernet48 48,49,50,51 +Ethernet52 52,53,54,55 +Ethernet56 56,57,58,59 +Ethernet60 60,61,62,63 +Ethernet64 64,65,66,67 +Ethernet68 68,69,70,71 +Ethernet72 72,73,74,75 +Ethernet76 76,77,78,79 +Ethernet80 80,81,82,83 +Ethernet84 84,85,86,87 +Ethernet88 88,89,90,91 +Ethernet92 92,93,94,95 +Ethernet96 96,97,98,99 +Ethernet100 100,101,102,103 +Ethernet104 104,105,106,107 +Ethernet108 108,109,110,111 +Ethernet112 112,113,114,115 +Ethernet116 116,117,118,119 +Ethernet120 120,121,122,123 +Ethernet124 124,125,126,127 +Ethernet128 128,129,130,131 +Ethernet132 132,133,134,135 +Ethernet136 136,137,138,139 +Ethernet140 140,141,142,143 +Ethernet144 144,145,146,147 +Ethernet148 148,149,150,151 +Ethernet152 152,153,154,155 +Ethernet156 156,157,158,159 +Ethernet160 160,161,162,163 +Ethernet164 164,165,166,167 +Ethernet168 168,169,170,171 +Ethernet172 172,173,174,175 +Ethernet176 176,177,178,179 +Ethernet180 180,181,182,183 +Ethernet184 184,185,186,187 +Ethernet188 188,189,190,191 +Ethernet192 192,193,194,195 +Ethernet196 196,197,198,199 +Ethernet200 200,201,202,203 +Ethernet204 204,205,206,207 +Ethernet208 208,209,210,211 +Ethernet212 212,213,214,215 +Ethernet216 216,217,218,219 +Ethernet220 220,221,222,223 +Ethernet224 224,225,226,227 +Ethernet228 228,229,230,231 +Ethernet232 232,233,234,235 +Ethernet236 236,237,238,239 +Ethernet240 240,241,242,243 +Ethernet244 244,245,246,247 +Ethernet248 248,249,250,251 +Ethernet252 252,253,254,255 +Ethernet256 256,257,258,259 diff --git a/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/qos.json.j2 b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/qos.json.j2 new file mode 100644 index 000000000000..7b8732e2e125 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/qos.json.j2 @@ -0,0 +1,161 @@ +{ + "TC_TO_PRIORITY_GROUP_MAP": { + "AZURE": { + "3": "3", + "4": "4" + } + }, + "MAP_PFC_PRIORITY_TO_QUEUE": { + "AZURE": { + "0": "0", + "1": "1", + "3": "3", + "4": "4" + } + }, + "TC_TO_QUEUE_MAP": { + "AZURE": { + "0": "0", + "1": "1", + "3": "3", + "4": "4" + } + }, + "DSCP_TO_TC_MAP": { + "AZURE": { + "0":"0", + "1":"0", + "2":"0", + "3":"3", + "4":"4", + "5":"0", + "6":"0", + "7":"0", + "8":"1", + "9":"0", + "10":"0", + "11":"0", + "12":"0", + "13":"0", + "14":"0", + "15":"0", + "16":"0", + "17":"0", + "18":"0", + "19":"0", + "20":"0", + "21":"0", + "22":"0", + "23":"0", + "24":"0", + "25":"0", + "26":"0", + "27":"0", + "28":"0", + "29":"0", + "30":"0", + "31":"0", + "32":"0", + "33":"0", + "34":"0", + "35":"0", + "36":"0", + "37":"0", + "38":"0", + "39":"0", + "40":"0", + "41":"0", + "42":"0", + "43":"0", + "44":"0", + "45":"0", + "46":"0", + "47":"0", + "48":"0", + "49":"0", + "50":"0", + "51":"0", + "52":"0", + "53":"0", + "54":"0", + "55":"0", + "56":"0", + "57":"0", + "58":"0", + "59":"0", + "60":"0", + "61":"0", + "62":"0", + "63":"0" + } + }, + "SCHEDULER": { + "scheduler.0": { + "type":"DWRR", + "weight": "25" + }, + "scheduler.1": { + "type":"DWRR", + "weight": "30" + }, + "scheduler.2": { + "type":"DWRR", + "weight": "20" + } + }, + "PFC_PRIORITY_TO_PRIORITY_GROUP_MAP": { + "AZURE": { + "3": "3", + "4": "4" + } + }, + "PORT_QOS_MAP": { + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124": { + "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", + "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", + "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", + "pfc_to_queue_map": "[MAP_PFC_PRIORITY_TO_QUEUE|AZURE]", + "pfc_to_pg_map" : "[PFC_PRIORITY_TO_PRIORITY_GROUP_MAP|AZURE]", + "pfc_enable": "3,4" + } + }, + "WRED_PROFILE": { + "AZURE_LOSSY": { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"516096", + "red_min_threshold":"516096", + "yellow_max_threshold":"516096", + "yellow_min_threshold":"516096", + "green_max_threshold": "184320", + "green_min_threshold": "184320" + }, + "AZURE_LOSSLESS": { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"516096", + "red_min_threshold":"516096", + "yellow_max_threshold":"516096", + "yellow_min_threshold":"516096", + "green_max_threshold": "184320", + "green_min_threshold": "184320" + } + }, + "QUEUE": { + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0": { + "scheduler" : "[SCHEDULER|scheduler.1]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|1": { + "scheduler" : "[SCHEDULER|scheduler.2]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0-1": { + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|3-4": { + "scheduler" : "[SCHEDULER|scheduler.0]", + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + } + } +} diff --git a/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/switch-sai.conf b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/switch-sai.conf new file mode 100644 index 000000000000..1f0ff8b32bb1 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/mavericks/switch-sai.conf @@ -0,0 +1,34 @@ +{ + "chip_list": [ + { + "id": "asic-0", + "chip_family": "Tofino", + "instance": 0, + "pcie_sysfs_prefix": "/sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0", + "pcie_domain": 0, + "pcie_bus": 5, + "pcie_fn": 0, + "pcie_dev": 0, + "pcie_int_mode": 1, + "sds_fw_path": "share/tofino_sds_fw/avago/firmware" + } + ], + "instance": 0, + "p4_program_list": [ + { + "id": "pgm-0", + "instance": 0, + "path": "switch", + "program-name": "switch", + "pd": "lib/tofinopd/switch/libpd.so", + "pd-thrift": "lib/tofinopd/switch/libpdthrift.so", + "table-config": "share/tofinopd/switch/context.json", + "tofino-bin": "share/tofinopd/switch/tofino.bin", + "switchapi": "lib/libswitchapi.so", + "switchsai": "lib/libswitchsai.so", + "agent0": "lib/platform/x86_64-accton_wedge100bf_65x-r0/libpltfm_mgr.so", + "switchapi_port_add": false, + "non_default_port_ppgs": 5 + } + ] +} diff --git a/device/barefoot/x86_64-accton_wedge100bf_65x-r0/minigraph.xml b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/minigraph.xml new file mode 100644 index 000000000000..18d614739737 --- /dev/null +++ b/device/barefoot/x86_64-accton_wedge100bf_65x-r0/minigraph.xml @@ -0,0 +1,1079 @@ + + + + + + ARISTA01T0 + 10.0.0.33 + switch + 10.0.0.32 + 1 + 180 + 60 + + + switch + 10.0.0.0 + ARISTA01T2 + 10.0.0.1 + 1 + 180 + 60 + + + ARISTA02T0 + 10.0.0.35 + switch + 10.0.0.34 + 1 + 180 + 60 + + + switch + 10.0.0.2 + ARISTA02T2 + 10.0.0.3 + 1 + 180 + 60 + + + ARISTA03T0 + 10.0.0.37 + switch + 10.0.0.36 + 1 + 180 + 60 + + + switch + 10.0.0.4 + ARISTA03T2 + 10.0.0.5 + 1 + 180 + 60 + + + ARISTA04T0 + 10.0.0.39 + switch + 10.0.0.38 + 1 + 180 + 60 + + + switch + 10.0.0.6 + ARISTA04T2 + 10.0.0.7 + 1 + 180 + 60 + + + ARISTA05T0 + 10.0.0.41 + switch + 10.0.0.40 + 1 + 180 + 60 + + + switch + 10.0.0.8 + ARISTA05T2 + 10.0.0.9 + 1 + 180 + 60 + + + ARISTA06T0 + 10.0.0.43 + switch + 10.0.0.42 + 1 + 180 + 60 + + + switch + 10.0.0.10 + ARISTA06T2 + 10.0.0.11 + 1 + 180 + 60 + + + ARISTA07T0 + 10.0.0.45 + switch + 10.0.0.44 + 1 + 180 + 60 + + + switch + 10.0.0.12 + ARISTA07T2 + 10.0.0.13 + 1 + 180 + 60 + + + ARISTA08T0 + 10.0.0.47 + switch + 10.0.0.46 + 1 + 180 + 60 + + + switch + 10.0.0.14 + ARISTA08T2 + 10.0.0.15 + 1 + 180 + 60 + + + ARISTA09T0 + 10.0.0.49 + switch + 10.0.0.48 + 1 + 180 + 60 + + + switch + 10.0.0.16 + ARISTA09T2 + 10.0.0.17 + 1 + 180 + 60 + + + ARISTA10T0 + 10.0.0.51 + switch + 10.0.0.50 + 1 + 180 + 60 + + + switch + 10.0.0.18 + ARISTA10T2 + 10.0.0.19 + 1 + 180 + 60 + + + ARISTA11T0 + 10.0.0.53 + switch + 10.0.0.52 + 1 + 180 + 60 + + + switch + 10.0.0.20 + ARISTA11T2 + 10.0.0.21 + 1 + 180 + 60 + + + ARISTA12T0 + 10.0.0.55 + switch + 10.0.0.54 + 1 + 180 + 60 + + + switch + 10.0.0.22 + ARISTA12T2 + 10.0.0.23 + 1 + 180 + 60 + + + ARISTA13T0 + 10.0.0.57 + switch + 10.0.0.56 + 1 + 180 + 60 + + + switch + 10.0.0.24 + ARISTA13T2 + 10.0.0.25 + 1 + 180 + 60 + + + ARISTA14T0 + 10.0.0.59 + switch + 10.0.0.58 + 1 + 180 + 60 + + + switch + 10.0.0.26 + ARISTA14T2 + 10.0.0.27 + 1 + 180 + 60 + + + ARISTA15T0 + 10.0.0.61 + switch + 10.0.0.60 + 1 + 180 + 60 + + + switch + 10.0.0.28 + ARISTA15T2 + 10.0.0.29 + 1 + 180 + 60 + + + ARISTA16T0 + 10.0.0.63 + switch + 10.0.0.62 + 1 + 180 + 60 + + + switch + 10.0.0.30 + ARISTA16T2 + 10.0.0.31 + 1 + 180 + 60 + + + + + 65100 + switch + + +
10.0.0.33
+ + + + +
10.0.0.1
+ + + + +
10.0.0.35
+ + + + +
10.0.0.3
+ + + + +
10.0.0.37
+ + + + +
10.0.0.5
+ + + + +
10.0.0.39
+ + + + +
10.0.0.7
+ + + + +
10.0.0.41
+ + + + +
10.0.0.9
+ + + + +
10.0.0.43
+ + + + +
10.0.0.11
+ + + + +
10.0.0.45
+ + + + +
10.0.0.13
+ + + + +
10.0.0.47
+ + + + +
10.0.0.15
+ + + + +
10.0.0.49
+ + + + +
10.0.0.17
+ + + + +
10.0.0.51
+ + + + +
10.0.0.19
+ + + + +
10.0.0.53
+ + + + +
10.0.0.21
+ + + + +
10.0.0.55
+ + + + +
10.0.0.23
+ + + + +
10.0.0.57
+ + + + +
10.0.0.25
+ + + + +
10.0.0.59
+ + + + +
10.0.0.27
+ + + + +
10.0.0.61
+ + + + +
10.0.0.29
+ + + + +
10.0.0.63
+ + + + +
10.0.0.31
+ + + + + + + + 64001 + ARISTA01T0 + + + + 65200 + ARISTA01T2 + + + + 64002 + ARISTA02T0 + + + + 65200 + ARISTA02T2 + + + + 64003 + ARISTA03T0 + + + + 65200 + ARISTA03T2 + + + + 64004 + ARISTA04T0 + + + + 65200 + ARISTA04T2 + + + + 64005 + ARISTA05T0 + + + + 65200 + ARISTA05T2 + + + + 64006 + ARISTA06T0 + + + + 65200 + ARISTA06T2 + + + + 64007 + ARISTA07T0 + + + + 65200 + ARISTA07T2 + + + + 64008 + ARISTA08T0 + + + + 65200 + ARISTA08T2 + + + + 64009 + ARISTA09T0 + + + + 65200 + ARISTA09T2 + + + + 64010 + ARISTA10T0 + + + + 65200 + ARISTA10T2 + + + + 64011 + ARISTA11T0 + + + + 65200 + ARISTA11T2 + + + + 64012 + ARISTA12T0 + + + + 65200 + ARISTA12T2 + + + + 64013 + ARISTA13T0 + + + + 65200 + ARISTA13T2 + + + + 64014 + ARISTA14T0 + + + + 65200 + ARISTA14T2 + + + + 64015 + ARISTA15T0 + + + + 65200 + ARISTA15T2 + + + + 64016 + ARISTA16T0 + + + + 65200 + ARISTA16T2 + + + + + + + + + + HostIP + Loopback0 + + 10.1.0.32/32 + + 10.1.0.32/32 + + + + + + + + switch + + + + + + Ethernet0 + 10.0.0.0/31 + + + + Ethernet4 + 10.0.0.2/31 + + + + Ethernet8 + 10.0.0.4/31 + + + + Ethernet12 + 10.0.0.6/31 + + + + Ethernet16 + 10.0.0.8/31 + + + + Ethernet20 + 10.0.0.10/31 + + + + Ethernet24 + 10.0.0.12/31 + + + + Ethernet28 + 10.0.0.14/31 + + + + Ethernet32 + 10.0.0.16/31 + + + + Ethernet36 + 10.0.0.18/31 + + + + Ethernet40 + 10.0.0.20/31 + + + + Ethernet44 + 10.0.0.22/31 + + + + Ethernet48 + 10.0.0.24/31 + + + + Ethernet52 + 10.0.0.26/31 + + + + Ethernet56 + 10.0.0.28/31 + + + + Ethernet60 + 10.0.0.30/31 + + + + Ethernet64 + 10.0.0.32/31 + + + + Ethernet68 + 10.0.0.34/31 + + + + Ethernet72 + 10.0.0.36/31 + + + + Ethernet76 + 10.0.0.38/31 + + + + Ethernet80 + 10.0.0.40/31 + + + + Ethernet84 + 10.0.0.42/31 + + + + Ethernet88 + 10.0.0.44/31 + + + + Ethernet92 + 10.0.0.46/31 + + + + Ethernet96 + 10.0.0.48/31 + + + + Ethernet100 + 10.0.0.50/31 + + + + Ethernet104 + 10.0.0.52/31 + + + + Ethernet108 + 10.0.0.54/31 + + + + Ethernet112 + 10.0.0.56/31 + + + + Ethernet116 + 10.0.0.58/31 + + + + Ethernet120 + 10.0.0.60/31 + + + + Ethernet124 + 10.0.0.62/31 + + + + + + + + + + + + DeviceInterfaceLink + switch + Ethernet0 + ARISTA01T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet4 + ARISTA02T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet8 + ARISTA03T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet12 + ARISTA04T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet16 + ARISTA05T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet20 + ARISTA06T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet24 + ARISTA07T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet28 + ARISTA08T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet32 + ARISTA09T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet36 + ARISTA10T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet40 + ARISTA11T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet44 + ARISTA12T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet48 + ARISTA13T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet52 + ARISTA14T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet56 + ARISTA15T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet60 + ARISTA16T2 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet64 + ARISTA01T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet68 + ARISTA02T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet72 + ARISTA03T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet76 + ARISTA04T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet80 + ARISTA05T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet84 + ARISTA06T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet88 + ARISTA07T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet92 + ARISTA08T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet96 + ARISTA09T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet100 + ARISTA10T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet104 + ARISTA11T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet108 + ARISTA12T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet112 + ARISTA13T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet116 + ARISTA14T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet120 + ARISTA15T0 + Ethernet1 + + + DeviceInterfaceLink + switch + Ethernet124 + ARISTA16T0 + Ethernet1 + + + + + switch + mavericks + + ` + + + + + switch + + + DhcpResources + + + + + NtpResources + + 0.debian.pool.ntp.org;1.debian.pool.ntp.org;2.debian.pool.ntp.org;3.debian.pool.ntp.org + + + SyslogResources + + + + + ErspanDestinationIpv4 + + 2.2.2.2 + + + + + + + switch + mavericks + diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/INGRASYS-S9180-32X/port_config.ini b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/INGRASYS-S9180-32X/port_config.ini new file mode 100644 index 000000000000..8b25c1333a67 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/INGRASYS-S9180-32X/port_config.ini @@ -0,0 +1,33 @@ +# name lanes alias speed autoneg fec index +Ethernet0 0,1,2,3 Ethernet0 100000 0 none 0 +Ethernet4 4,5,6,7 Ethernet4 100000 0 none 1 +Ethernet8 8,9,10,11 Ethernet8 100000 0 none 2 +Ethernet12 12,13,14,15 Ethernet12 100000 0 none 3 +Ethernet16 16,17,18,19 Ethernet16 100000 0 none 4 +Ethernet20 20,21,22,23 Ethernet20 100000 0 none 5 +Ethernet24 24,25,26,27 Ethernet24 100000 0 none 6 +Ethernet28 28,29,30,31 Ethernet28 100000 0 none 7 +Ethernet32 32,33,34,35 Ethernet32 100000 0 none 8 +Ethernet36 36,37,38,39 Ethernet36 100000 0 none 9 +Ethernet40 40,41,42,43 Ethernet40 100000 0 none 10 +Ethernet44 44,45,46,47 Ethernet44 100000 0 none 11 +Ethernet48 48,49,50,51 Ethernet48 100000 0 none 12 +Ethernet52 52,53,54,55 Ethernet52 100000 0 none 13 +Ethernet56 56,57,58,59 Ethernet56 100000 0 none 14 +Ethernet60 60,61,62,63 Ethernet60 100000 0 none 15 +Ethernet64 64,65,66,67 Ethernet64 100000 0 none 16 +Ethernet68 68,69,70,71 Ethernet68 100000 0 none 17 +Ethernet72 72,73,74,75 Ethernet72 100000 0 none 18 +Ethernet76 76,77,78,79 Ethernet76 100000 0 none 19 +Ethernet80 80,81,82,83 Ethernet80 100000 0 none 20 +Ethernet84 84,85,86,87 Ethernet84 100000 0 none 21 +Ethernet88 88,89,90,91 Ethernet88 100000 0 none 22 +Ethernet92 92,93,94,95 Ethernet92 100000 0 none 23 +Ethernet96 96,97,98,99 Ethernet96 100000 0 none 24 +Ethernet100 100,101,102,103 Ethernet100 100000 0 none 25 +Ethernet104 104,105,106,107 Ethernet104 100000 0 none 26 +Ethernet108 108,109,110,111 Ethernet108 100000 0 none 27 +Ethernet112 112,113,114,115 Ethernet112 100000 0 none 28 +Ethernet116 116,117,118,119 Ethernet116 100000 0 none 29 +Ethernet120 120,121,122,123 Ethernet120 100000 0 none 30 +Ethernet124 124,125,126,127 Ethernet124 100000 0 none 31 diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/INGRASYS-S9180-32X/switch-sai.conf b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/INGRASYS-S9180-32X/switch-sai.conf new file mode 100644 index 000000000000..4f316bb9e5af --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/INGRASYS-S9180-32X/switch-sai.conf @@ -0,0 +1,33 @@ +{ + "chip_list": [ + { + "id": "asic-0", + "chip_family": "Tofino", + "instance": 0, + "pcie_sysfs_prefix": "/sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0", + "pcie_domain": 0, + "pcie_bus": 5, + "pcie_fn": 0, + "pcie_dev": 0, + "pcie_int_mode": 1, + "sds_fw_path": "share/tofino_sds_fw/avago/firmware" + } + ], + "instance": 0, + "p4_program_list": [ + { + "id": "pgm-0", + "instance": 0, + "path": "switch", + "program-name": "switch", + "pd": "lib/tofinopd/switch/libpd.so", + "pd-thrift": "lib/tofinopd/switch/libpdthrift.so", + "table-config": "share/tofinopd/switch/context.json", + "tofino-bin": "share/tofinopd/switch/tofino.bin", + "switchapi": "lib/libswitchapi.so", + "switchsai": "lib/libswitchsai.so", + "agent0": "lib/platform/x86_64-ingrasys_s9180_32x-r0/libpltfm_mgr.so", + "switchapi_port_add": false + } + ] +} diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/fancontrol b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/fancontrol new file mode 100644 index 000000000000..dc303afac034 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/fancontrol @@ -0,0 +1,12 @@ +# Configuration file generated by pwmconfig, changes will be lost +INTERVAL=10 +DEVPATH=hwmon1=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-56/56-002f +DEVNAME=hwmon1=w83795adg +FCTEMPS=hwmon1/device/pwm2=hwmon2/temp2_input hwmon1/device/pwm1=hwmon2/temp2_input +FCFANS=hwmon1/device/pwm2=hwmon1/device/fan8_input hwmon1/device/pwm2=hwmon1/device/fan7_input hwmon1/device/pwm2=hwmon1/device/fan6_input hwmon1/device/pwm2=hwmon1/device/fan5_input hwmon1/device/pwm1=hwmon1/device/fan4_input hwmon1/device/pwm1=hwmon1/device/fan3_input hwmon1/device/pwm1=hwmon1/device/fan2_input hwmon1/device/pwm1=hwmon1/device/fan1_input +# TODO: check the temp value with HW after board ready +MINTEMP=hwmon1/device/pwm2=20 hwmon1/device/pwm1=20 +MAXTEMP=hwmon1/device/pwm2=60 hwmon1/device/pwm1=60 +MINSTART=hwmon1/device/pwm2=75 hwmon1/device/pwm1=75 +MINSTOP=hwmon1/device/pwm2=22 hwmon1/device/pwm1=22 + diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/installer.conf b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/installer.conf new file mode 100644 index 000000000000..925a32fc0c3a --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/installer.conf @@ -0,0 +1,3 @@ +CONSOLE_PORT=0x3f8 +CONSOLE_DEV=0 +CONSOLE_SPEED=115200 diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/minigraph.xml b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/minigraph.xml new file mode 100644 index 000000000000..e2d151e6ec47 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/minigraph.xml @@ -0,0 +1,151 @@ + + + + + + OCPSCH0104001MS + 10.10.1.26 + OCPSCH01040GGLF + 10.10.1.25 + 1 + 10 + 3 + + + OCPSCH0104002MS + 10.10.2.26 + OCPSCH01040GGLF + 10.10.2.25 + 1 + 10 + 3 + + + + + 64536 + OCPSCH01040GGLF + + +
10.10.1.26
+ + + + +
10.10.2.26
+ + + + + + + + 64542 + OCPSCH0104001MS + + + + 64543 + OCPSCH0104002MS + + + + + + + + + + HostIP + Loopback0 + + 100.0.0.9/32 + + 100.0.0.9/32 + + + + + + + + OCPSCH01040GGLF + + + + + + Ethernet0 + 10.10.1.25/30 + + + + Ethernet4 + 10.10.2.25/30 + + + + + + + + + + + + 40000 + DeviceInterfaceLink + OCPSCH0104001MS + Ethernet24 + OCPSCH01040GGLF + Ethernet0 + + + 40000 + DeviceInterfaceLink + OCPSCH0104002MS + Ethernet24 + OCPSCH01040GGLF + Ethernet4 + + + + + OCPSCH01040GGLF + INGRASYS-S9180-32X + + + + + + + OCPSCH01040GGLF + + + DhcpResources + + + + + NtpResources + + 0.debian.pool.ntp.org;1.debian.pool.ntp.org;2.debian.pool.ntp.org;3.debian.pool.ntp.org + + + SyslogResources + + + + + ErspanDestinationIpv4 + + 2.2.2.2 + + + + + + + OCPSCH01040GGLF + INGRASYS-S9180-32X + diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/eeprom.py b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/eeprom.py new file mode 100644 index 000000000000..d1270eeffbf6 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/eeprom.py @@ -0,0 +1,22 @@ +#!/usr/bin/env python + +############################################################################# +# Ingrasys S9180-32X +# +# Platform and model specific eeprom subclass, inherits from the base class, +# and provides the followings: +# - the eeprom format definition +# - specific encoder/decoder if there is special need +############################################################################# + +try: + from sonic_eeprom import eeprom_tlvinfo +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + + +class board(eeprom_tlvinfo.TlvInfoDecoder): + + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/sys/class/i2c-adapter/i2c-0/0-0055/eeprom" + super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/psuutil.py b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/psuutil.py new file mode 100644 index 000000000000..8a719388266a --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/psuutil.py @@ -0,0 +1,90 @@ +# +# psuutil.py +# Platform-specific PSU status interface for SONiC +# + + +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError(str(e) + "- required module not found") + + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + SYS_GPIO_DIR = "/sys/class/gpio/" + + def __init__(self): + PsuBase.__init__(self) + + + # Get sysfs attribute + def get_attr_value(self, attr_path): + + retval = 'ERR' + if (not os.path.isfile(attr_path)): + return retval + + try: + with open(attr_path, 'r') as fd: + retval = fd.read() + except Exception as error: + logging.error("Unable to open ", attr_path, " file !") + + retval = retval.rstrip('\r\n') + return retval + + def get_num_psus(self): + """ + Retrieves the number of PSUs available on the device + :return: An integer, the number of PSUs available on the device + """ + MAX_PSUS = 2 + return MAX_PSUS + + def get_psu_status(self, index): + """ + Retrieves the oprational status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is operating properly, False if PSU is\ + faulty + """ + status = 0 + gpio_path = [ 'gpio99/value', 'gpio96/value' ] + attr_path = self.SYS_GPIO_DIR + gpio_path[index-1] + + attr_value = self.get_attr_value(attr_path) + + if (attr_value != 'ERR'): + attr_value = int(attr_value, 10) + # Check for PSU status + if (attr_value == 1): + status = 1 + + return status + + def get_psu_presence(self, index): + """ + Retrieves the presence status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is plugged, False if not + """ + status = 0 + gpio_path = [ 'gpio100/value', 'gpio97/value' ] + attr_path = self.SYS_GPIO_DIR + gpio_path[index-1] + + attr_value = self.get_attr_value(attr_path) + + if (attr_value != 'ERR'): + attr_value = int(attr_value, 10) + # Check for PSU status + if (attr_value == 1): + status = 1 + + return status + diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/sfputil.py b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/sfputil.py new file mode 100644 index 000000000000..e0f85a981182 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/plugins/sfputil.py @@ -0,0 +1,290 @@ +# sfputil.py +# +# Platform-specific SFP transceiver interface for SONiC +# + +try: + import time + from sonic_sfp.sfputilbase import SfpUtilBase +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + + PORT_START = 0 + PORT_END = 33 + SFP_PORT_START = 32 + PORTS_IN_BLOCK = 34 + + BASE_DIR_PATH = "/sys/class/gpio/gpio{0}/direction" + BASE_VAL_PATH = "/sys/class/gpio/gpio{0}/value" + + _port_to_eeprom_mapping = {} + port_to_i2c_mapping = { + 0: 10, + 1: 9, + 2: 12, + 3: 11, + 4: 14, + 5: 13, + 6: 16, + 7: 15, + 8: 18, + 9: 17, + 10: 20, + 11: 19, + 12: 22, + 13: 21, + 14: 24, + 15: 23, + 16: 26, + 17: 25, + 18: 28, + 19: 27, + 20: 30, + 21: 29, + 22: 32, + 23: 31, + 24: 34, + 25: 33, + 26: 36, + 27: 35, + 28: 38, + 29: 37, + 30: 40, + 31: 39, + 32: 45, + 33: 46 + } + + abs_to_gpio_mapping = { + 0: 241, + 1: 240, + 2: 243, + 3: 242, + 4: 245, + 5: 244, + 6: 247, + 7: 246, + 8: 249, + 9: 248, + 10: 251, + 11: 250, + 12: 253, + 13: 252, + 14: 255, + 15: 254, + 16: 225, + 17: 224, + 18: 227, + 19: 226, + 20: 229, + 21: 228, + 22: 231, + 23: 230, + 24: 233, + 25: 232, + 26: 235, + 27: 234, + 28: 237, + 29: 236, + 30: 239, + 31: 238, + 32: 177, + 33: 176 + } + + lpmode_to_gpio_mapping = { + 0: 161, + 1: 160, + 2: 163, + 3: 162, + 4: 165, + 5: 164, + 6: 167, + 7: 166, + 8: 169, + 9: 168, + 10: 171, + 11: 170, + 12: 173, + 13: 172, + 14: 175, + 15: 174, + 16: 145, + 17: 144, + 18: 147, + 19: 146, + 20: 149, + 21: 148, + 22: 151, + 23: 150, + 24: 153, + 25: 152, + 26: 155, + 27: 154, + 28: 157, + 29: 156, + 30: 159, + 31: 158 + } + + reset_to_gpio_mapping = { + 0: 129, + 1: 128, + 2: 131, + 3: 130, + 4: 133, + 5: 132, + 6: 135, + 7: 134, + 8: 137, + 9: 136, + 10: 139, + 11: 138, + 12: 141, + 13: 140, + 14: 143, + 15: 142, + 16: 113, + 17: 112, + 18: 115, + 19: 114, + 20: 117, + 21: 116, + 22: 119, + 23: 118, + 24: 121, + 25: 120, + 26: 123, + 27: 122, + 28: 125, + 29: 124, + 30: 127, + 31: 126 + } + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_ports(self): + return range(0, self.PORTS_IN_BLOCK + 1) + + @property + def port_to_eeprom_mapping(self): + return self._port_to_eeprom_mapping + @property + def sfp_port_start(self): + return self.SFP_PORT_START + + def __init__(self): + # Override port_to_eeprom_mapping for class initialization + eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom" + + for x in range(self.port_start, self.port_end + 1): + port_eeprom_path = eeprom_path.format(self.port_to_i2c_mapping[x]) + self.port_to_eeprom_mapping[x] = port_eeprom_path + + SfpUtilBase.__init__(self) + + def get_presence(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + try: + abs_device_file = self.BASE_VAL_PATH.format( + self.abs_to_gpio_mapping[port_num]) + val_file = open(abs_device_file) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = val_file.readline().rstrip() + val_file.close() + + # content is a string, either "0" or "1" + if content == "1": + return True + + return False + + def get_low_power_mode(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.sfp_port_start: # TBD + return False + + try: + lpmode_val_device_file = self.BASE_VAL_PATH.format( + self.lpmode_to_gpio_mapping[port_num]) + val_file = open(lpmode_val_device_file) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = val_file.readline().rstrip() + val_file.close() + + # content is a string, either "0" or "1" + if content == "1": + return True + + return False + + def set_low_power_mode(self, port_num, lpmode): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.sfp_port_start: # TBD + return False + + try: + lpmode_val_device_file = self.BASE_VAL_PATH.format( + self.lpmode_to_gpio_mapping[port_num]) + val_file = open(lpmode_val_device_file, "w") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + val_file.write("1" if lpmode is True else "0") + val_file.close() + + return True + + def reset(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.sfp_port_start: # TBD + return False + + try: + reset_val_device_file = self.BASE_VAL_PATH.format( + self.reset_to_gpio_mapping[port_num]) + val_file = open(reset_val_device_file, "w") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + val_file.write("1") + val_file.close() + + # Sleep 1 second to allow it to settle + time.sleep(1) + + try: + reset_val_device_file = self.BASE_VAL_PATH.format( + self.reset_to_gpio_mapping[port_num]) + val_file = open(reset_val_device_file, "w") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + val_file.write("0") + val_file.close() + + return True diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/sensors.conf b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/sensors.conf new file mode 100644 index 000000000000..eb5a5b4b69f3 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/sensors.conf @@ -0,0 +1,76 @@ +# libsensors configuration file +chip "i350bb-*" + ignore loc1 + +chip "jc42-*" + label temp1 "DIMM Temp" + set temp1_max 50 + set temp1_crit 85 + +bus "i2c-0" "I2C I801" +chip "tmp75-i2c-*-4f" + label temp1 "CPU Board Temp" + set temp1_max 50 + +bus "i2c-41" "i2c-7-switch (chan_id 0)" +chip "tmp75-i2c-*-48" + label temp1 "Near PSU1" + set temp1_max 50 +chip "tmp75-i2c-*-4a" + label temp1 "Rear MAC" + set temp1_max 50 +chip "tmp75-i2c-*-4b" + label temp1 "Near Port 32" + set temp1_max 50 +chip "tmp75-i2c-*-4d" + label temp1 "Near PSU2" + set temp1_max 50 +chip "lm86-i2c-*-4c" + label temp1 "Front MAC" + label temp2 "ASIC Core Temp" + set temp1_min 20 + set temp1_max 65 + set temp1_crit 70 + set temp2_min 20 + set temp2_max 70 + set temp2_crit 80 + +bus "i2c-56" "i2c-0-mux (chan_id 7)" +chip "w83795adg-*" + label in0 "0.9V" + set in0_max 0.927 + set in0_min 0.873 + label in1 "0.86V" + set in1_max 0.877 + set in1_min 0.843 + ignore in2 + ignore in3 + ignore in4 + ignore in5 + ignore in6 + ignore in7 + label in12 "2.5V" + #compute in12 (2*4*@)/10, @-(2*4*@/10) + compute in12 @/(1+(3/10)), @*(1+(3/10)) + set in12_max 2.625 + set in12_min 2.375 + # in12 and in13 are the same source + ignore in13 + ignore in14 + ignore in15 + ignore in16 + label fan1 "FANTRAY 1-A" + label fan2 "FANTRAY 1-B" + label fan3 "FANTRAY 2-A" + label fan4 "FANTRAY 2-B" + label fan5 "FANTRAY 3-A" + label fan6 "FANTRAY 3-B" + label fan7 "FANTRAY 4-A" + label fan8 "FANTRAY 4-B" + ignore temp1 + ignore temp2 + ignore temp3 + ignore temp4 + ignore temp5 + ignore temp6 + ignore intrusion0 diff --git a/device/wnc/x86_64-wnc_osw1800-r0/OSW1800-48x6q/port_config.ini b/device/wnc/x86_64-wnc_osw1800-r0/OSW1800-48x6q/port_config.ini new file mode 100644 index 000000000000..578f59203d30 --- /dev/null +++ b/device/wnc/x86_64-wnc_osw1800-r0/OSW1800-48x6q/port_config.ini @@ -0,0 +1,55 @@ +# name lanes alias speed autoneg fec +Ethernet0 0 Ethernet0 25000 1 rs +Ethernet4 1 Ethernet4 25000 1 rs +Ethernet8 2 Ethernet8 25000 1 rs +Ethernet12 3 Ethernet12 25000 1 rs +Ethernet16 4 Ethernet16 25000 1 rs +Ethernet20 5 Ethernet20 25000 1 rs +Ethernet24 6 Ethernet24 25000 1 rs +Ethernet28 7 Ethernet28 25000 1 rs +Ethernet32 8 Ethernet32 25000 1 rs +Ethernet36 9 Ethernet36 25000 1 rs +Ethernet40 10 Ethernet40 25000 1 rs +Ethernet44 11 Ethernet44 25000 1 rs +Ethernet48 12 Ethernet48 25000 1 rs +Ethernet52 13 Ethernet52 25000 1 rs +Ethernet56 14 Ethernet56 25000 1 rs +Ethernet60 15 Ethernet60 25000 1 rs +Ethernet64 16 Ethernet64 25000 1 rs +Ethernet68 17 Ethernet68 25000 1 rs +Ethernet72 18 Ethernet72 25000 1 rs +Ethernet76 19 Ethernet76 25000 1 rs +Ethernet80 20 Ethernet80 25000 1 rs +Ethernet84 21 Ethernet84 25000 1 rs +Ethernet88 22 Ethernet88 25000 1 rs +Ethernet92 23 Ethernet92 25000 1 rs +Ethernet96 24 Ethernet96 25000 1 rs +Ethernet100 25 Ethernet100 25000 1 rs +Ethernet104 26 Ethernet104 25000 1 rs +Ethernet108 27 Ethernet108 25000 1 rs +Ethernet112 28 Ethernet112 25000 1 rs +Ethernet116 29 Ethernet116 25000 1 rs +Ethernet120 30 Ethernet120 25000 1 rs +Ethernet124 31 Ethernet124 25000 1 rs +Ethernet128 32 Ethernet128 25000 1 rs +Ethernet132 33 Ethernet132 25000 1 rs +Ethernet136 34 Ethernet136 25000 1 rs +Ethernet140 35 Ethernet140 25000 1 rs +Ethernet144 36 Ethernet144 25000 1 rs +Ethernet148 37 Ethernet148 25000 1 rs +Ethernet152 38 Ethernet152 25000 1 rs +Ethernet156 39 Ethernet156 25000 1 rs +Ethernet160 40 Ethernet160 25000 1 rs +Ethernet164 41 Ethernet164 25000 1 rs +Ethernet168 42 Ethernet168 25000 1 rs +Ethernet172 43 Ethernet172 25000 1 rs +Ethernet176 44 Ethernet176 25000 1 rs +Ethernet180 45 Ethernet180 25000 1 rs +Ethernet184 46 Ethernet184 25000 1 rs +Ethernet188 47 Ethernet188 25000 1 rs +Ethernet192 48,49,50,51 Ethernet192 100000 1 rs +Ethernet196 52,53,54,55 Ethernet196 100000 1 rs +Ethernet200 56,57,58,59 Ethernet200 100000 1 rs +Ethernet204 60,61,62,63 Ethernet204 100000 1 rs +Ethernet208 64,65,66,67 Ethernet208 100000 1 rs +Ethernet212 68,69,70,71 Ethernet212 100000 1 rs diff --git a/device/wnc/x86_64-wnc_osw1800-r0/OSW1800-48x6q/switch-sai.conf b/device/wnc/x86_64-wnc_osw1800-r0/OSW1800-48x6q/switch-sai.conf new file mode 100644 index 000000000000..65a02a621f03 --- /dev/null +++ b/device/wnc/x86_64-wnc_osw1800-r0/OSW1800-48x6q/switch-sai.conf @@ -0,0 +1,33 @@ +{ + "chip_list": [ + { + "id": "asic-0", + "chip_family": "Tofino", + "instance": 0, + "pcie_sysfs_prefix": "/sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0", + "pcie_domain": 0, + "pcie_bus": 5, + "pcie_fn": 0, + "pcie_dev": 0, + "pcie_int_mode": 1, + "sds_fw_path": "share/tofino_sds_fw/avago/firmware" + } + ], + "instance": 0, + "p4_program_list": [ + { + "id": "pgm-0", + "instance": 0, + "path": "switch", + "program-name": "switch", + "pd": "lib/tofinopd/switch/libpd.so", + "pd-thrift": "lib/tofinopd/switch/libpdthrift.so", + "table-config": "share/tofinopd/switch/context.json", + "tofino-bin": "share/tofinopd/switch/tofino.bin", + "switchapi": "lib/libswitchapi.so", + "switchsai": "lib/libswitchsai.so", + "agent0": "lib/platform/x86_64-wnc_osw1800-r0/libpltfm_mgr.so", + "switchapi_port_add": false + } + ] +} diff --git a/device/wnc/x86_64-wnc_osw1800-r0/fancontrol b/device/wnc/x86_64-wnc_osw1800-r0/fancontrol new file mode 100644 index 000000000000..d661bd11f1b2 --- /dev/null +++ b/device/wnc/x86_64-wnc_osw1800-r0/fancontrol @@ -0,0 +1,11 @@ +INTERVAL=10 +DEVPATH=hwmon1=devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.2/i2c-2/i2c-5/5-0033 hwmon2=devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.2/i2c-2/i2c-7/7-001e hwmon3=devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.2/i2c-2/i2c-7/7-004e hwmon4=devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.2/i2c-2/i2c-7/7-004f +DEVNAME=hwmon1=wnc_cpld3 hwmon2=tmp421 hwmon3=tmp75 hwmon4=tmp421 +FCTEMPS=hwmon1/pwm1=hwmon2/temp1_input hwmon1/pwm2=hwmon2/temp2_input hwmon1/pwm3=hwmon3/temp1_input hwmon1/pwm4=hwmon4/temp1_input hwmon1/pwm5=hwmon4/temp2_input +FCFANS=hwmon1/pwm1=hwmon1/fan1_input hwmon1/pwm2=hwmon1/fan2_input hwmon1/pwm3=hwmon1/fan3_input hwmon1/pwm4=hwmon1/fan4_input hwmon1/pwm5=hwmon1/fan5_input +MINTEMP=hwmon1/pwm1=20 hwmon1/pwm2=20 hwmon1/pwm3=20 hwmon1/pwm4=20 hwmon1/pwm5=20 +MAXTEMP=hwmon1/pwm1=50 hwmon1/pwm2=50 hwmon1/pwm3=50 hwmon1/pwm4=50 hwmon1/pwm5=50 +MINSTART=hwmon1/pwm1=32 hwmon1/pwm2=32 hwmon1/pwm3=32 hwmon1/pwm4=32 hwmon1/pwm5=32 +MINSTOP=hwmon1/pwm1=22 hwmon1/pwm2=22 hwmon1/pwm3=22 hwmon1/pwm4=22 hwmon1/pwm5=22 +MINPWM=hwmon1/pwm1=10 hwmon1/pwm2=10 hwmon1/pwm3=10 hwmon1/pwm4=10 hwmon1/pwm5=10 +MAXPWM=hwmon1/pwm1=100 hwmon1/pwm2=100 hwmon1/pwm3=100 hwmon1/pwm4=100 hwmon1/pwm5=100 diff --git a/device/wnc/x86_64-wnc_osw1800-r0/installer.conf b/device/wnc/x86_64-wnc_osw1800-r0/installer.conf new file mode 100644 index 000000000000..dfa6df22689b --- /dev/null +++ b/device/wnc/x86_64-wnc_osw1800-r0/installer.conf @@ -0,0 +1,3 @@ +CONSOLE_PORT=0x2f8 +CONSOLE_DEV=1 +CONSOLE_SPEED=57600 diff --git a/device/wnc/x86_64-wnc_osw1800-r0/minigraph.xml b/device/wnc/x86_64-wnc_osw1800-r0/minigraph.xml new file mode 100644 index 000000000000..fc4dcee3058e --- /dev/null +++ b/device/wnc/x86_64-wnc_osw1800-r0/minigraph.xml @@ -0,0 +1,1761 @@ + + + + + + ARISTA01T0 + 10.0.0.55 + switch2 + 10.0.0.54 + 1 + 180 + 60 + + + switch2 + 10.0.0.0 + ARISTA01T2 + 10.0.0.1 + 1 + 180 + 60 + + + ARISTA02T0 + 10.0.0.57 + switch2 + 10.0.0.56 + 1 + 180 + 60 + + + switch2 + 10.0.0.2 + ARISTA02T2 + 10.0.0.3 + 1 + 180 + 60 + + + ARISTA03T0 + 10.0.0.59 + switch2 + 10.0.0.58 + 1 + 180 + 60 + + + switch2 + 10.0.0.4 + ARISTA03T2 + 10.0.0.5 + 1 + 180 + 60 + + + ARISTA04T0 + 10.0.0.61 + switch2 + 10.0.0.60 + 1 + 180 + 60 + + + switch2 + 10.0.0.6 + ARISTA04T2 + 10.0.0.7 + 1 + 180 + 60 + + + ARISTA05T0 + 10.0.0.63 + switch2 + 10.0.0.62 + 1 + 180 + 60 + + + switch2 + 10.0.0.8 + ARISTA05T2 + 10.0.0.9 + 1 + 180 + 60 + + + ARISTA06T0 + 10.0.0.65 + switch2 + 10.0.0.64 + 1 + 180 + 60 + + + switch2 + 10.0.0.10 + ARISTA06T2 + 10.0.0.11 + 1 + 180 + 60 + + + ARISTA07T0 + 10.0.0.67 + switch2 + 10.0.0.66 + 1 + 180 + 60 + + + switch2 + 10.0.0.12 + ARISTA07T2 + 10.0.0.13 + 1 + 180 + 60 + + + ARISTA08T0 + 10.0.0.69 + switch2 + 10.0.0.68 + 1 + 180 + 60 + + + switch2 + 10.0.0.14 + ARISTA08T2 + 10.0.0.15 + 1 + 180 + 60 + + + ARISTA09T0 + 10.0.0.71 + switch2 + 10.0.0.70 + 1 + 180 + 60 + + + switch2 + 10.0.0.16 + ARISTA09T2 + 10.0.0.17 + 1 + 180 + 60 + + + ARISTA10T0 + 10.0.0.73 + switch2 + 10.0.0.72 + 1 + 180 + 60 + + + switch2 + 10.0.0.18 + ARISTA10T2 + 10.0.0.19 + 1 + 180 + 60 + + + ARISTA11T0 + 10.0.0.75 + switch2 + 10.0.0.74 + 1 + 180 + 60 + + + switch2 + 10.0.0.20 + ARISTA11T2 + 10.0.0.21 + 1 + 180 + 60 + + + ARISTA12T0 + 10.0.0.77 + switch2 + 10.0.0.76 + 1 + 180 + 60 + + + switch2 + 10.0.0.22 + ARISTA12T2 + 10.0.0.23 + 1 + 180 + 60 + + + ARISTA13T0 + 10.0.0.79 + switch2 + 10.0.0.78 + 1 + 180 + 60 + + + switch2 + 10.0.0.24 + ARISTA13T2 + 10.0.0.25 + 1 + 180 + 60 + + + ARISTA14T0 + 10.0.0.81 + switch2 + 10.0.0.80 + 1 + 180 + 60 + + + switch2 + 10.0.0.26 + ARISTA14T2 + 10.0.0.27 + 1 + 180 + 60 + + + ARISTA15T0 + 10.0.0.83 + switch2 + 10.0.0.82 + 1 + 180 + 60 + + + switch2 + 10.0.0.28 + ARISTA15T2 + 10.0.0.29 + 1 + 180 + 60 + + + ARISTA16T0 + 10.0.0.85 + switch2 + 10.0.0.84 + 1 + 180 + 60 + + + switch2 + 10.0.0.30 + ARISTA16T2 + 10.0.0.31 + 1 + 180 + 60 + + + ARISTA17T0 + 10.0.0.87 + switch2 + 10.0.0.86 + 1 + 180 + 60 + + + switch2 + 10.0.0.32 + ARISTA17T2 + 10.0.0.33 + 1 + 180 + 60 + + + ARISTA18T0 + 10.0.0.89 + switch2 + 10.0.0.88 + 1 + 180 + 60 + + + switch2 + 10.0.0.34 + ARISTA18T2 + 10.0.0.35 + 1 + 180 + 60 + + + ARISTA19T0 + 10.0.0.91 + switch2 + 10.0.0.90 + 1 + 180 + 60 + + + switch2 + 10.0.0.36 + ARISTA19T2 + 10.0.0.37 + 1 + 180 + 60 + + + ARISTA20T0 + 10.0.0.93 + switch2 + 10.0.0.92 + 1 + 180 + 60 + + + switch2 + 10.0.0.38 + ARISTA20T2 + 10.0.0.39 + 1 + 180 + 60 + + + ARISTA21T0 + 10.0.0.95 + switch2 + 10.0.0.94 + 1 + 180 + 60 + + + switch2 + 10.0.0.40 + ARISTA21T2 + 10.0.0.41 + 1 + 180 + 60 + + + ARISTA22T0 + 10.0.0.97 + switch2 + 10.0.0.96 + 1 + 180 + 60 + + + switch2 + 10.0.0.42 + ARISTA22T2 + 10.0.0.43 + 1 + 180 + 60 + + + ARISTA23T0 + 10.0.0.99 + switch2 + 10.0.0.98 + 1 + 180 + 60 + + + switch2 + 10.0.0.44 + ARISTA23T2 + 10.0.0.45 + 1 + 180 + 60 + + + ARISTA24T0 + 10.0.0.101 + switch2 + 10.0.0.100 + 1 + 180 + 60 + + + switch2 + 10.0.0.46 + ARISTA24T2 + 10.0.0.47 + 1 + 180 + 60 + + + ARISTA25T0 + 10.0.0.103 + switch2 + 10.0.0.102 + 1 + 180 + 60 + + + switch2 + 10.0.0.48 + ARISTA25T2 + 10.0.0.49 + 1 + 180 + 60 + + + ARISTA26T0 + 10.0.0.105 + switch2 + 10.0.0.104 + 1 + 180 + 60 + + + switch2 + 10.0.0.50 + ARISTA26T2 + 10.0.0.51 + 1 + 180 + 60 + + + ARISTA27T0 + 10.0.0.107 + switch2 + 10.0.0.106 + 1 + 180 + 60 + + + switch2 + 10.0.0.52 + ARISTA27T2 + 10.0.0.53 + 1 + 180 + 60 + + + + + 65100 + switch2 + + +
10.0.0.55
+ + + + +
10.0.0.1
+ + + + +
10.0.0.57
+ + + + +
10.0.0.3
+ + + + +
10.0.0.59
+ + + + +
10.0.0.5
+ + + + +
10.0.0.61
+ + + + +
10.0.0.7
+ + + + +
10.0.0.63
+ + + + +
10.0.0.9
+ + + + +
10.0.0.65
+ + + + +
10.0.0.11
+ + + + +
10.0.0.67
+ + + + +
10.0.0.13
+ + + + +
10.0.0.69
+ + + + +
10.0.0.15
+ + + + +
10.0.0.71
+ + + + +
10.0.0.17
+ + + + +
10.0.0.73
+ + + + +
10.0.0.19
+ + + + +
10.0.0.75
+ + + + +
10.0.0.21
+ + + + +
10.0.0.77
+ + + + +
10.0.0.23
+ + + + +
10.0.0.79
+ + + + +
10.0.0.25
+ + + + +
10.0.0.81
+ + + + +
10.0.0.27
+ + + + +
10.0.0.83
+ + + + +
10.0.0.29
+ + + + +
10.0.0.85
+ + + + +
10.0.0.31
+ + + + +
10.0.0.87
+ + + + +
10.0.0.33
+ + + + +
10.0.0.89
+ + + + +
10.0.0.35
+ + + + +
10.0.0.91
+ + + + +
10.0.0.37
+ + + + +
10.0.0.93
+ + + + +
10.0.0.39
+ + + + +
10.0.0.95
+ + + + +
10.0.0.41
+ + + + +
10.0.0.97
+ + + + +
10.0.0.43
+ + + + +
10.0.0.99
+ + + + +
10.0.0.45
+ + + + +
10.0.0.101
+ + + + +
10.0.0.47
+ + + + +
10.0.0.103
+ + + + +
10.0.0.49
+ + + + +
10.0.0.105
+ + + + +
10.0.0.51
+ + + + +
10.0.0.107
+ + + + +
10.0.0.53
+ + + + + + + + 64001 + ARISTA01T0 + + + + 65200 + ARISTA01T2 + + + + 64002 + ARISTA02T0 + + + + 65200 + ARISTA02T2 + + + + 64003 + ARISTA03T0 + + + + 65200 + ARISTA03T2 + + + + 64004 + ARISTA04T0 + + + + 65200 + ARISTA04T2 + + + + 64005 + ARISTA05T0 + + + + 65200 + ARISTA05T2 + + + + 64006 + ARISTA06T0 + + + + 65200 + ARISTA06T2 + + + + 64007 + ARISTA07T0 + + + + 65200 + ARISTA07T2 + + + + 64008 + ARISTA08T0 + + + + 65200 + ARISTA08T2 + + + + 64009 + ARISTA09T0 + + + + 65200 + ARISTA09T2 + + + + 64010 + ARISTA10T0 + + + + 65200 + ARISTA10T2 + + + + 64011 + ARISTA11T0 + + + + 65200 + ARISTA11T2 + + + + 64012 + ARISTA12T0 + + + + 65200 + ARISTA12T2 + + + + 64013 + ARISTA13T0 + + + + 65200 + ARISTA13T2 + + + + 64014 + ARISTA14T0 + + + + 65200 + ARISTA14T2 + + + + 64015 + ARISTA15T0 + + + + 65200 + ARISTA15T2 + + + + 64016 + ARISTA16T0 + + + + 65200 + ARISTA16T2 + + + + 64016 + ARISTA17T0 + + + + 65200 + ARISTA17T2 + + + + 64016 + ARISTA18T0 + + + + 65200 + ARISTA18T2 + + + + 64016 + ARISTA19T0 + + + + 65200 + ARISTA19T2 + + + + 64016 + ARISTA20T0 + + + + 65200 + ARISTA20T2 + + + + 64016 + ARISTA21T0 + + + + 65200 + ARISTA21T2 + + + + 64016 + ARISTA22T0 + + + + 65200 + ARISTA22T2 + + + + 64016 + ARISTA23T0 + + + + 65200 + ARISTA23T2 + + + + 64016 + ARISTA24T0 + + + + 65200 + ARISTA24T2 + + + + 64016 + ARISTA25T0 + + + + 65200 + ARISTA25T2 + + + + 64016 + ARISTA26T0 + + + + 65200 + ARISTA26T2 + + + + 64016 + ARISTA27T0 + + + + 65200 + ARISTA27T2 + + + + + + + + + + HostIP + Loopback0 + + 10.1.0.32/32 + + 10.1.0.32/32 + + + + + + + + switch2 + + + + + + Ethernet0 + 10.0.0.0/31 + + + + Ethernet4 + 10.0.0.2/31 + + + + Ethernet8 + 10.0.0.4/31 + + + + Ethernet12 + 10.0.0.6/31 + + + + Ethernet16 + 10.0.0.8/31 + + + + Ethernet20 + 10.0.0.10/31 + + + + Ethernet24 + 10.0.0.12/31 + + + + Ethernet28 + 10.0.0.14/31 + + + + Ethernet32 + 10.0.0.16/31 + + + + Ethernet36 + 10.0.0.18/31 + + + + Ethernet40 + 10.0.0.20/31 + + + + Ethernet44 + 10.0.0.22/31 + + + + Ethernet48 + 10.0.0.24/31 + + + + Ethernet52 + 10.0.0.26/31 + + + + Ethernet56 + 10.0.0.28/31 + + + + Ethernet60 + 10.0.0.30/31 + + + + Ethernet64 + 10.0.0.32/31 + + + + Ethernet68 + 10.0.0.34/31 + + + + Ethernet72 + 10.0.0.36/31 + + + + Ethernet76 + 10.0.0.38/31 + + + + Ethernet80 + 10.0.0.40/31 + + + + Ethernet84 + 10.0.0.42/31 + + + + Ethernet88 + 10.0.0.44/31 + + + + Ethernet92 + 10.0.0.46/31 + + + + Ethernet96 + 10.0.0.48/31 + + + + Ethernet100 + 10.0.0.50/31 + + + + Ethernet104 + 10.0.0.52/31 + + + + Ethernet108 + 10.0.0.54/31 + + + + Ethernet112 + 10.0.0.56/31 + + + + Ethernet116 + 10.0.0.58/31 + + + + Ethernet120 + 10.0.0.60/31 + + + + Ethernet124 + 10.0.0.62/31 + + + + Ethernet128 + 10.0.0.64/31 + + + + Ethernet132 + 10.0.0.66/31 + + + + Ethernet136 + 10.0.0.68/31 + + + + Ethernet140 + 10.0.0.70/31 + + + + Ethernet144 + 10.0.0.72/31 + + + + Ethernet148 + 10.0.0.74/31 + + + + Ethernet152 + 10.0.0.76/31 + + + + Ethernet156 + 10.0.0.78/31 + + + + Ethernet160 + 10.0.0.80/31 + + + + Ethernet164 + 10.0.0.82/31 + + + + Ethernet168 + 10.0.0.84/31 + + + + Ethernet172 + 10.0.0.86/31 + + + + Ethernet176 + 10.0.0.88/31 + + + + Ethernet180 + 10.0.0.90/31 + + + + Ethernet184 + 10.0.0.92/31 + + + + Ethernet188 + 10.0.0.94/31 + + + + Ethernet192 + 10.0.0.96/31 + + + + Ethernet196 + 10.0.0.98/31 + + + + Ethernet200 + 10.0.0.100/31 + + + + Ethernet204 + 10.0.0.102/31 + + + + Ethernet208 + 10.0.0.104/31 + + + + Ethernet212 + 10.0.0.106/31 + + + + + + + + + + + + DeviceInterfaceLink + switch2 + Ethernet0 + ARISTA01T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet4 + ARISTA02T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet8 + ARISTA03T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet12 + ARISTA04T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet16 + ARISTA05T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet20 + ARISTA06T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet24 + ARISTA07T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet28 + ARISTA08T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet32 + ARISTA09T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet36 + ARISTA10T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet40 + ARISTA11T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet44 + ARISTA12T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet48 + ARISTA13T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet52 + ARISTA14T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet56 + ARISTA15T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet60 + ARISTA16T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet64 + ARISTA17T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet68 + ARISTA18T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet72 + ARISTA19T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet76 + ARISTA20T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet80 + ARISTA21T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet84 + ARISTA22T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet88 + ARISTA23T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet92 + ARISTA24T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet96 + ARISTA25T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet100 + ARISTA26T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet104 + ARISTA27T2 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet108 + ARISTA01T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet112 + ARISTA02T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet116 + ARISTA03T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet120 + ARISTA04T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet124 + ARISTA05T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet128 + ARISTA06T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet132 + ARISTA07T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet136 + ARISTA08T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet140 + ARISTA09T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet144 + ARISTA10T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet148 + ARISTA11T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet152 + ARISTA12T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet156 + ARISTA13T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet160 + ARISTA14T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet164 + ARISTA15T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet168 + ARISTA16T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet172 + ARISTA17T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet176 + ARISTA18T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet180 + ARISTA19T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet184 + ARISTA20T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet188 + ARISTA21T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet192 + ARISTA22T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet196 + ARISTA23T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet200 + ARISTA24T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet204 + ARISTA25T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet208 + ARISTA26T0 + Ethernet1 + + + DeviceInterfaceLink + switch2 + Ethernet212 + ARISTA27T0 + Ethernet1 + + + + + switch2 + OSW1800-48x6q + + + + + + + switch2 + + + DhcpResources + + 192.168.1.111 + + + NtpResources + + 0.debian.pool.ntp.org;1.debian.pool.ntp.org;2.debian.pool.ntp.org;3.debian.pool.ntp.org + + + SyslogResources + + 192.0.0.1 + + + ErspanDestinationIpv4 + + 2.2.2.2 + + + + + + + switch2 + OSW1800-48x6q + diff --git a/device/wnc/x86_64-wnc_osw1800-r0/plugins/eeprom.py b/device/wnc/x86_64-wnc_osw1800-r0/plugins/eeprom.py new file mode 100644 index 000000000000..a073374794fa --- /dev/null +++ b/device/wnc/x86_64-wnc_osw1800-r0/plugins/eeprom.py @@ -0,0 +1,22 @@ +#!/usr/bin/env python + +try: + import exceptions + import binascii + import time + import optparse + import warnings + import os + import sys + from sonic_eeprom import eeprom_base + from sonic_eeprom import eeprom_tlvinfo +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + + +class board(eeprom_tlvinfo.TlvInfoDecoder): + + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/sys/class/i2c-adapter/i2c-8/8-0052/eeprom" + super(board, self).__init__(self.eeprom_path, 0, '', True) + diff --git a/device/wnc/x86_64-wnc_osw1800-r0/plugins/psuutil.py b/device/wnc/x86_64-wnc_osw1800-r0/plugins/psuutil.py new file mode 100644 index 000000000000..e62159c8a8cc --- /dev/null +++ b/device/wnc/x86_64-wnc_osw1800-r0/plugins/psuutil.py @@ -0,0 +1,64 @@ +# +# psuutil.py +# Platform-specific PSU status interface for SONiC +# + + +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError(str(e) + "- required module not found") + + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + def __init__(self): + PsuBase.__init__(self) + + def get_num_psus(self): + return 2 + + def get_psu_status(self, index): + if index == 1: + psu_path = "/sys/bus/i2c/devices/6-0050/eeprom" + elif index == 2: + psu_path = "/sys/bus/i2c/devices/6-0051/eeprom" + else: + return False + + try: + data = open(psu_path, "rb") + except IOError: + return False + + result = int(data.read(1).encode("hex"), 16) + data.close() + + if result != 255 and result != 0: + return True + else: + return False + + def get_psu_presence(self, index): + if index == 1: + psu_path = "/sys/bus/i2c/devices/6-0050/eeprom" + elif index == 2: + psu_path = "/sys/bus/i2c/devices/6-0051/eeprom" + else: + return False + + try: + data = open(psu_path, "rb") + except IOError: + return False + + result = int(data.read(1).encode("hex"), 16) + data.close() + + if result != 255 and result != 0: + return True + else: + return False diff --git a/device/wnc/x86_64-wnc_osw1800-r0/plugins/sfputil.py b/device/wnc/x86_64-wnc_osw1800-r0/plugins/sfputil.py new file mode 100644 index 000000000000..1c1e86bc5d6e --- /dev/null +++ b/device/wnc/x86_64-wnc_osw1800-r0/plugins/sfputil.py @@ -0,0 +1,205 @@ +#! /usr/bin/python +# +# Platform-specific SFP transceiver interface for SONiC +# + +try: + import time + from sonic_sfp.sfputilbase import SfpUtilBase + import sys + sys.path.append('/usr/lib/python2.7/dist-packages/sonic_sfp/') + from sff8472 import sff8472InterfaceId + from sff8472 import sff8472Dom + from sff8436 import sff8436InterfaceId + from sff8436 import sff8436Dom +except ImportError, e: + raise ImportError("%s - required module not found" % str(e)) + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + + PORT_START = 0 + PORT_END = 53 + PORTS_IN_BLOCK = 54 + + EEPROM_OFFSET = 11 + + _port_to_eeprom_mapping = {} + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_ports(self): + return range(self.PORT_START + 48, self.PORTS_IN_BLOCK) + + @property + def port_to_eeprom_mapping(self): + return self._port_to_eeprom_mapping + + def __init__(self): + eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom" + + for x in range(0, self.port_end + 1): + self._port_to_eeprom_mapping[x] = eeprom_path.format(x + self.EEPROM_OFFSET) + + SfpUtilBase.__init__(self) + + def get_presence(self, port_num): + bit_mask = port_num % 8 + + if port_num <= 7: + presence_path = "/sys/bus/i2c/devices/3-0031/sfp_mod_abs1" + elif 8 <= port_num and port_num <= 15: + presence_path = "/sys/bus/i2c/devices/3-0031/sfp_mod_abs2" + elif 16 <= port_num and port_num <= 23: + presence_path = "/sys/bus/i2c/devices/3-0031/sfp_mod_abs3" + elif 24 <= port_num and port_num <= 27: + presence_path = "/sys/bus/i2c/devices/3-0031/sfp_mod_abs4" + elif 28 <= port_num and port_num <= 31: + presence_path = "/sys/bus/i2c/devices/4-0032/sfp_mod_abs1" + bit_mask = bit_mask - 4 + elif 32 <= port_num and port_num <= 39: + presence_path = "/sys/bus/i2c/devices/4-0032/sfp_mod_abs2" + elif 40 <= port_num and port_num <= 47: + presence_path = "/sys/bus/i2c/devices/4-0032/sfp_mod_abs3" + elif 48 <= port_num and port_num <= 71: + presence_path = "/sys/bus/i2c/devices/4-0032/qsfp_modprs" + else: + return False + + try: + reg_file = open(presence_path, "rb") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = reg_file.readline().rstrip() + reg_value = int(content, 16) + reg_file.close() + + if reg_value & (1 << bit_mask) == 0: + return True + else: + return False + + def get_low_power_mode(self, port_num): + if port_num in self.qsfp_ports: + bit_mask = port_num % 8 + else: + return False + + try: + reg_file = open("/sys/bus/i2c/devices/4-0032/qsfp_lpmode") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + + content = reg_file.readline().rstrip() + reg_value = int(content, 16) + reg_file.close() + + if reg_value & (1 << bit_mask) == 0: + return False + + return True + + def set_low_power_mode(self, port_num, lpmode): + if port_num in self.qsfp_ports: + bit_mask = port_num % 8 + else: + return False + + try: + reg_file = open("/sys/bus/i2c/devices/4-0032/qsfp_lpmode", "r+") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = reg_file.readline().rstrip() + reg_value = int(content, 16) + + if lpmode is True: + reg_value = reg_value | (1 << bit_mask) + else: + reg_value = reg_value & ~(1 << bit_mask) + + reg_file.seek(0) + reg_file.write(str(reg_value)) + reg_file.close() + + return True + + def reset(self, port_num): + if port_num in self.qsfp_ports: + bit_mask = (port_num % 8) + 2 + else: + return False + + try: + reg_file = open("/sys/bus/i2c/devices/4-0032/reset_control", "r+") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = reg_file.readline().rstrip() + reg_value = int(content, 16) + reg_value = reg_value & ~(1 << bit_mask) + + reg_file.seek(0) + reg_file.write(str(reg_value)) + reg_file.close() + + time.sleep(1) + + try: + reg_file = open("/sys/bus/i2c/devices/4-0032/reset_control", "w") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + reg_value = reg_value | (1 << bit_mask) + reg_file.seek(0) + reg_file.write(str(reg_value)) + reg_file.close() + + return True + + def get_eeprom_dict(self, port_num): + if not self.get_presence(port_num): + return None + + sfp_data = {} + + eeprom_ifraw = self.get_eeprom_raw(port_num) + eeprom_domraw = self.get_eeprom_dom_raw(port_num) + + if eeprom_ifraw is None: + return None + + if port_num in self.qsfp_ports: + sfpi_obj = sff8436InterfaceId(eeprom_ifraw) + if sfpi_obj is not None: + sfp_data['interface'] = sfpi_obj.get_data_pretty() + + sfpd_obj = sff8436Dom(eeprom_ifraw) + if sfpd_obj is not None: + sfp_data['dom'] = sfpd_obj.get_data_pretty() + return sfp_data + + sfpi_obj = sff8472InterfaceId(eeprom_ifraw) + if sfpi_obj is not None: + sfp_data['interface'] = sfpi_obj.get_data_pretty() + cal_type = sfpi_obj.get_calibration_type() + + if eeprom_domraw is not None: + sfpd_obj = sff8472Dom(eeprom_domraw, cal_type) + if sfpd_obj is not None: + sfp_data['dom'] = sfpd_obj.get_data_pretty() + + return sfp_data diff --git a/device/wnc/x86_64-wnc_osw1800-r0/sensors.conf b/device/wnc/x86_64-wnc_osw1800-r0/sensors.conf new file mode 100644 index 000000000000..d91945ff722b --- /dev/null +++ b/device/wnc/x86_64-wnc_osw1800-r0/sensors.conf @@ -0,0 +1,33 @@ +# libsensors configuration filei +# -------------------------------------------------- +# + +bus "i2c-7" "i2c-2-mux" +chip "tmp421-i2c-7-1E" + label temp1 "ts1" + set temp1_max 50 + set temp1_max_hyst 25 + label temp2 "ts4" + set temp2_max 50 + set temp2_max_hyst 25 + +chip "tmp75-i2c-7-4E" + label temp1 "ts3" + set temp1_max 50 + set temp1_max_hyst 25 + +chip "tmp421-i2c-7-4F" + label temp1 "ts2" + set temp1_max 50 + set temp1_max_hyst 25 + label temp2 "ts5" + set temp2_max 50 + set temp2_max_hyst 25 + +bus "i2c-5" "i2c-2-mux" +chip "wnc_cpld3-i2c-5-33" + label fan1 "fan1" + label fan2 "fan2" + label fan3 "fan3" + label fan4 "fan4" + label fan5 "fan5" diff --git a/dockers/docker-orchagent-bfn b/dockers/docker-orchagent-bfn new file mode 120000 index 000000000000..8d52609c56e5 --- /dev/null +++ b/dockers/docker-orchagent-bfn @@ -0,0 +1 @@ +docker-orchagent \ No newline at end of file diff --git a/dockers/docker-orchagent/orchagent.sh b/dockers/docker-orchagent/orchagent.sh index 027c6d52a2fe..af9e5b0766ab 100755 --- a/dockers/docker-orchagent/orchagent.sh +++ b/dockers/docker-orchagent/orchagent.sh @@ -20,6 +20,8 @@ elif [ "$platform" == "cavium" ]; then ORCHAGENT_ARGS+="-m $MAC_ADDRESS" elif [ "$platform" == "nephos" ]; then ORCHAGENT_ARGS+="-m $MAC_ADDRESS" +elif [ "$platform" == "barefoot" ]; then + ORCHAGENT_ARGS+="-m $MAC_ADDRESS" fi exec /usr/bin/orchagent ${ORCHAGENT_ARGS} diff --git a/dockers/docker-saiserver-bfn/Dockerfile b/dockers/docker-saiserver-bfn/Dockerfile new file mode 100755 index 000000000000..427a551e0096 --- /dev/null +++ b/dockers/docker-saiserver-bfn/Dockerfile @@ -0,0 +1,38 @@ +FROM docker-base + +## Make apt-get non-interactive +ENV DEBIAN_FRONTEND=noninteractive + +RUN apt-get update + +COPY ["deps/applibs_*.deb", "/deps/applibs-dev_*.deb", "/deps/sx-complib_*.deb", "/deps/sxd-libs_*.deb", "/deps/sx-scew_*.deb", "/deps/sx-examples_*.deb", "/deps/sx-gen-utils_*.deb", "/deps/python-sdk-api_*.deb", "/deps/iproute2_*.deb", "/deps/mlnx-sai_*.deb", "/deps/libthrift-0.9.3_*.deb", "/deps/libnl-3-200_*.deb", "/deps/libnl-genl-3-200_*.deb", "/deps/libnl-route-3-200_*.deb", "/deps/"] + +RUN dpkg_apt() { [ -f $1 ] && { dpkg -i $1 || apt-get -y install -f; } || return 1; }; \ + dpkg_apt /deps/applibs_*.deb \ + && dpkg_apt /deps/applibs-dev_*.deb \ + && dpkg_apt /deps/sx-complib_*.deb \ + && dpkg_apt /deps/sxd-libs_*.deb \ + && dpkg_apt /deps/sx-scew_*.deb \ + && dpkg_apt /deps/sx-examples_*.deb \ + && dpkg_apt /deps/sx-gen-utils_*.deb \ + && dpkg_apt /deps/python-sdk-api_*.deb \ + && dpkg_apt /deps/iproute2_*.deb \ + && dpkg_apt /deps/mlnx-sai_*.deb \ + && dpkg_apt /deps/libthrift-0.9.3_*.deb \ + && dpkg_apt /deps/libnl-3-200_*.deb \ + && dpkg_apt /deps/libnl-genl-3-200_*.deb \ + && dpkg_apt /deps/libnl-route-3-200_*.deb + +COPY ["deps/saiserver", "start.sh", "/usr/bin/"] + +COPY ["supervisord.conf", "/etc/supervisor/conf.d/"] + +COPY ["profile.ini", "portmap.ini", "/etc/sai/"] + + +## Clean up +RUN apt-get clean -y; apt-get autoclean -y; apt-get autoremove -y +RUN rm -rf /deps + +ENTRYPOINT ["/usr/bin/supervisord"] + diff --git a/dockers/docker-saiserver-bfn/portmap.ini b/dockers/docker-saiserver-bfn/portmap.ini new file mode 100644 index 000000000000..4d3be08ce5f8 --- /dev/null +++ b/dockers/docker-saiserver-bfn/portmap.ini @@ -0,0 +1,33 @@ +# alias lanes +Ethernet1 0,1,2,3 +Ethernet2 4,5,6,7 +Ethernet3 8,9,10,11 +Ethernet4 12,13,14,15 +Ethernet5 16,17,18,19 +Ethernet6 20,21,22,23 +Ethernet7 24,25,26,27 +Ethernet8 28,29,30,31 +Ethernet9 32,33,34,35 +Ethernet10 36,37,38,39 +Ethernet11 40,41,42,43 +Ethernet12 44,45,46,47 +Ethernet13 48,49,50,51 +Ethernet14 52,53,54,55 +Ethernet15 56,57,58,59 +Ethernet16 60,61,62,63 +Ethernet17 64,65,66,67 +Ethernet18 68,69,70,71 +Ethernet19 72,73,74,75 +Ethernet20 76,77,78,79 +Ethernet21 80,81,82,83 +Ethernet22 84,85,86,87 +Ethernet23 88,89,90,91 +Ethernet24 92,93,94,95 +Ethernet25 96,97,98,99 +Ethernet26 100,101,102,103 +Ethernet27 104,105,106,107 +Ethernet28 108,109,110,111 +Ethernet29 112,113,114,115 +Ethernet30 116,117,118,119 +Ethernet31 120,121,122,123 +Ethernet32 124,125,126,127 \ No newline at end of file diff --git a/dockers/docker-saiserver-bfn/profile.ini b/dockers/docker-saiserver-bfn/profile.ini new file mode 100644 index 000000000000..b20b2c6f0e06 --- /dev/null +++ b/dockers/docker-saiserver-bfn/profile.ini @@ -0,0 +1 @@ +SAI_INIT_CONFIG_FILE=/usr/share/sai_tofino.xml diff --git a/dockers/docker-saiserver-bfn/sai_tofino.xml b/dockers/docker-saiserver-bfn/sai_tofino.xml new file mode 100644 index 000000000000..139597f9cb07 --- /dev/null +++ b/dockers/docker-saiserver-bfn/sai_tofino.xml @@ -0,0 +1,2 @@ + + diff --git a/dockers/docker-saiserver-bfn/start.sh b/dockers/docker-saiserver-bfn/start.sh new file mode 100755 index 000000000000..16457d13e03a --- /dev/null +++ b/dockers/docker-saiserver-bfn/start.sh @@ -0,0 +1,8 @@ +#!/usr/bin/env bash + +rm -f /var/run/rsyslogd.pid + +supervisorctl start rsyslogd + +supervisorctl start saiserver + diff --git a/dockers/docker-saiserver-bfn/supervisord.conf b/dockers/docker-saiserver-bfn/supervisord.conf new file mode 100644 index 000000000000..e09ac3cbb449 --- /dev/null +++ b/dockers/docker-saiserver-bfn/supervisord.conf @@ -0,0 +1,29 @@ +[supervisord] +logfile_maxbytes=1MB +logfile_backups=2 +nodaemon=true + +[program:start.sh] +command=/usr/bin/start.sh +priority=1 +autostart=true +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog + +[program:rsyslogd] +command=/usr/sbin/rsyslogd -n +priority=2 +autostart=false +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog + +[program:saiserver] +command=/usr/bin/saiserver -p /etc/sai/profile.ini -f /etc/sai/portmap.ini +priority=3 +autostart=false +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog + diff --git a/files/build_templates/buffers_config.j2 b/files/build_templates/buffers_config.j2 index 23503017f179..b4d260092c43 100644 --- a/files/build_templates/buffers_config.j2 +++ b/files/build_templates/buffers_config.j2 @@ -125,7 +125,7 @@ def {% endif %} {%- if defs.generate_pg_profils is defined %} -{{ defs.generate_pg_profils }}, +{{ defs.generate_pg_profils(port_names_active) }} {% else %} "BUFFER_PG": { "{{ port_names_active }}|0-1": { diff --git a/files/image_config/interfaces/interfaces-config.sh b/files/image_config/interfaces/interfaces-config.sh index a702917419ca..b5b06904c508 100755 --- a/files/image_config/interfaces/interfaces-config.sh +++ b/files/image_config/interfaces/interfaces-config.sh @@ -4,6 +4,17 @@ ifdown --force eth0 sonic-cfggen -d -t /usr/share/sonic/templates/interfaces.j2 > /etc/network/interfaces +# Add usb0 interface for bfn platforms +platform=$(sonic-cfggen -H -v 'DEVICE_METADATA["localhost"]["platform"]') +if [[ "$platform" == "x86_64-accton_wedge100bf_32x-r0" || "$platform" == "x86_64-accton_wedge100bf_65x-r0" ]]; then +cat <<'EOF' >> /etc/network/interfaces +# BMC interface +auto usb0 +iface usb0 inet6 auto +up ifconfig usb0 txqueuelen 64 +EOF +fi + [ -f /var/run/dhclient.eth0.pid ] && kill `cat /var/run/dhclient.eth0.pid` && rm -f /var/run/dhclient.eth0.pid systemctl restart networking diff --git a/files/image_config/interfaces/interfaces.j2 b/files/image_config/interfaces/interfaces.j2 index 71e2d2514fa2..924ff54af308 100644 --- a/files/image_config/interfaces/interfaces.j2 +++ b/files/image_config/interfaces/interfaces.j2 @@ -18,6 +18,7 @@ iface lo {{ 'inet' if prefix | ipv4 else 'inet6' }} static {% endfor %} {% endblock loopback %} {% block mgmt_interface %} + # The management network interface auto eth0 {% if MGMT_INTERFACE %} diff --git a/platform/barefoot/bfn-platform-ingrasys.mk b/platform/barefoot/bfn-platform-ingrasys.mk new file mode 100644 index 000000000000..a85d69baab79 --- /dev/null +++ b/platform/barefoot/bfn-platform-ingrasys.mk @@ -0,0 +1,5 @@ +BFN_INGRASYS_PLATFORM = bfnplatform-ingrasys_1.0.0_amd64.deb +$(BFN_INGRASYS_PLATFORM)_URL = "https://github.com/Ingrasys-sonic/packages/raw/master/lib/bfnplatform-ingrasys_1.0.0_amd64.deb" + +SONIC_ONLINE_DEBS += $(BFN_INGRASYS_PLATFORM) # $(BFN_SAI_DEV) +$(BFN_SAI_DEV)_DEPENDS += $(BFN_INGRASYS_PLATFORM) diff --git a/platform/barefoot/bfn-platform-wnc.mk b/platform/barefoot/bfn-platform-wnc.mk new file mode 100644 index 000000000000..e2f45d35b2b8 --- /dev/null +++ b/platform/barefoot/bfn-platform-wnc.mk @@ -0,0 +1,5 @@ +WNC_OSW1800_PLATFORM = bfnplatformwnc_1.0.0_amd64.deb +$(WNC_OSW1800_PLATFORM)_URL = "https://github.com/YaoTien/download/raw/master/sonic/sde/7_0_0_18/bfnplatformwnc_1.0.0_amd64.deb" + +SONIC_ONLINE_DEBS += $(WNC_OSW1800_PLATFORM) # $(BFN_SAI_DEV) +$(BFN_SAI_DEV)_DEPENDS += $(WNC_OSW1800_PLATFORM) diff --git a/platform/barefoot/bfn-platform.mk b/platform/barefoot/bfn-platform.mk new file mode 100644 index 000000000000..6f1e6e302961 --- /dev/null +++ b/platform/barefoot/bfn-platform.mk @@ -0,0 +1,5 @@ +BFN_PLATFORM = bfnplatform_1.0.0_amd64.deb +$(BFN_PLATFORM)_URL = "https://github.com/barefootnetworks/sonic-release-pkgs/raw/rel_8_2/bfnplatform_1.0.0_amd64.deb" + +SONIC_ONLINE_DEBS += $(BFN_PLATFORM) # $(BFN_SAI_DEV) +$(BFN_SAI_DEV)_DEPENDS += $(BFN_PLATFORM) diff --git a/platform/barefoot/bfn-sai.mk b/platform/barefoot/bfn-sai.mk new file mode 100644 index 000000000000..7e507d15a9fe --- /dev/null +++ b/platform/barefoot/bfn-sai.mk @@ -0,0 +1,5 @@ +BFN_SAI = bfnsdk_1.0.0_amd64.deb +$(BFN_SAI)_URL = "https://github.com/barefootnetworks/sonic-release-pkgs/raw/rel_8_2/bfnsdk_1.0.0_amd64.deb" + +SONIC_ONLINE_DEBS += $(BFN_SAI) # $(BFN_SAI_DEV) +$(BFN_SAI_DEV)_DEPENDS += $(BFN_SAI) diff --git a/platform/barefoot/docker-orchagent-bfn.mk b/platform/barefoot/docker-orchagent-bfn.mk new file mode 100644 index 000000000000..f13fa63d6f2a --- /dev/null +++ b/platform/barefoot/docker-orchagent-bfn.mk @@ -0,0 +1,19 @@ +# docker image for orchagent + +DOCKER_ORCHAGENT_BFN = docker-orchagent-bfn.gz +$(DOCKER_ORCHAGENT_BFN)_PATH = $(DOCKERS_PATH)/docker-orchagent +$(DOCKER_ORCHAGENT_BFN)_DEPENDS += $(SWSS) $(REDIS_TOOLS) +$(DOCKER_ORCHAGENT_BFN)_LOAD_DOCKERS += $(DOCKER_CONFIG_ENGINE) +SONIC_DOCKER_IMAGES += $(DOCKER_ORCHAGENT_BFN) +SONIC_INSTALL_DOCKER_IMAGES += $(DOCKER_ORCHAGENT_BFN) + +$(DOCKER_ORCHAGENT_BFN)_CONTAINER_NAME = swss +$(DOCKER_ORCHAGENT_BFN)_RUN_OPT += --net=host --privileged -t +$(DOCKER_ORCHAGENT_BFN)_RUN_OPT += -v /etc/network/interfaces:/etc/network/interfaces:ro +$(DOCKER_ORCHAGENT_BFN)_RUN_OPT += -v /etc/network/interfaces.d/:/etc/network/interfaces.d/:ro +$(DOCKER_ORCHAGENT_BFN)_RUN_OPT += -v /host/machine.conf:/host/machine.conf:ro +$(DOCKER_ORCHAGENT_BFN)_RUN_OPT += -v /etc/sonic:/etc/sonic:ro +$(DOCKER_ORCHAGENT_BFN)_RUN_OPT += -v /var/log/swss:/var/log/swss:rw + +$(DOCKER_ORCHAGENT_BFN)_BASE_IMAGE_FILES += swssloglevel:/usr/bin/swssloglevel +$(DOCKER_ORCHAGENT_BFN)_FILES += $(ARP_UPDATE_SCRIPT) diff --git a/platform/barefoot/docker-ptf-bfn.mk b/platform/barefoot/docker-ptf-bfn.mk new file mode 100644 index 000000000000..573e9cd9cffa --- /dev/null +++ b/platform/barefoot/docker-ptf-bfn.mk @@ -0,0 +1,5 @@ +# docker image for docker-ptf + +DOCKER_PTF_BFN = docker-ptf-bfn.gz +$(DOCKER_PTF_BFN)_PATH = $(DOCKERS_PATH)/docker-ptf-saithrift +$(DOCKER_PTF_BFN)_LOAD_DOCKERS += $(DOCKER_PTF) diff --git a/platform/barefoot/docker-syncd-bfn-rpc.mk b/platform/barefoot/docker-syncd-bfn-rpc.mk new file mode 100644 index 000000000000..61f5570c1612 --- /dev/null +++ b/platform/barefoot/docker-syncd-bfn-rpc.mk @@ -0,0 +1,15 @@ +# docker image for syncd with rpc + +DOCKER_SYNCD_BFN_RPC = docker-syncd-bfn-rpc.gz +$(DOCKER_SYNCD_BFN_RPC)_PATH = $(PLATFORM_PATH)/docker-syncd-bfn-rpc +$(DOCKER_SYNCD_BFN_RPC)_DEPENDS += $(SYNCD_RPC) $(LIBTHRIFT) +$(DOCKER_SYNCD_BFN_RPC)_LOAD_DOCKERS += $(DOCKER_SYNCD_BFN) +SONIC_DOCKER_IMAGES += $(DOCKER_SYNCD_BFN_RPC) +ifeq ($(ENABLE_SYNCD_RPC),y) +SONIC_INSTALL_DOCKER_IMAGES += $(DOCKER_SYNCD_BFN_RPC) +endif + +$(DOCKER_SYNCD_BFN_RPC)_CONTAINER_NAME = syncd +$(DOCKER_SYNCD_BFN_RPC)_RUN_OPT += --net=host --privileged -t +$(DOCKER_SYNCD_BFN_RPC)_RUN_OPT += -v /host/machine.conf:/etc/machine.conf +$(DOCKER_SYNCD_BFN_RPC)_RUN_OPT += -v /etc/sonic:/etc/sonic:ro diff --git a/platform/barefoot/docker-syncd-bfn-rpc/Dockerfile.j2 b/platform/barefoot/docker-syncd-bfn-rpc/Dockerfile.j2 new file mode 100644 index 000000000000..9efeeb3f6b51 --- /dev/null +++ b/platform/barefoot/docker-syncd-bfn-rpc/Dockerfile.j2 @@ -0,0 +1,52 @@ +FROM docker-syncd-bfn + +## Make apt-get non-interactive +ENV DEBIAN_FRONTEND=noninteractive + +COPY \ +{% for deb in docker_syncd_bfn_rpc_debs.split(' ') -%} +debs/{{ deb }}{{' '}} +{%- endfor -%} +debs/ + +RUN dpkg -P syncd + +RUN dpkg_apt() { [ -f $1 ] && { dpkg -i $1 || apt-get -y install -f; } || return 1; } ; \ +{% for deb in docker_syncd_bfn_rpc_debs.split(' ') -%} +dpkg_apt debs/{{ deb }}{{'; '}} +{%- endfor %} + +## Pre-install the fundamental packages +RUN apt-get update \ + && apt-get -y install \ + net-tools \ + python-pip \ + build-essential \ + libssl-dev \ + libffi-dev \ + python-dev \ + wget \ + cmake \ + && wget https://github.com/nanomsg/nanomsg/archive/1.0.0.tar.gz \ + && tar xvfz 1.0.0.tar.gz \ + && cd nanomsg-1.0.0 \ + && mkdir -p build \ + && cmake . \ + && make install \ + && ldconfig \ + && cd .. \ + && rm -fr nanomsg-1.0.0 \ + && rm -f 1.0.0.tar.gz \ + && pip install cffi==1.7.0 \ + && pip install --upgrade cffi==1.7.0 \ + && pip install nnpy \ + && mkdir -p /opt \ + && cd /opt \ + && wget https://raw.githubusercontent.com/p4lang/ptf/master/ptf_nn/ptf_nn_agent.py \ + && apt-get clean -y; apt-get autoclean -y; apt-get autoremove -y \ + && rm -rf /root/deps + +COPY ["ptf_nn_agent.conf", "/etc/supervisor/conf.d/"] + +ENTRYPOINT ["/usr/bin/supervisord"] + diff --git a/platform/barefoot/docker-syncd-bfn-rpc/ptf_nn_agent.conf b/platform/barefoot/docker-syncd-bfn-rpc/ptf_nn_agent.conf new file mode 100644 index 000000000000..fa1ed0eb1622 --- /dev/null +++ b/platform/barefoot/docker-syncd-bfn-rpc/ptf_nn_agent.conf @@ -0,0 +1,10 @@ +[program:ptf_nn_agent] +command=/usr/bin/python /opt/ptf_nn_agent.py --device-socket 1@tcp://0.0.0.0:10900 -i 1-3@Ethernet12 --set-iface-rcv-buffer=109430400 +process_name=ptf_nn_agent +stdout_logfile=/tmp/ptf_nn_agent.out.log +stderr_logfile=/tmp/ptf_nn_agent.err.log +redirect_stderr=false +autostart=true +autorestart=true +startsecs=1 +numprocs=1 diff --git a/platform/barefoot/docker-syncd-bfn.mk b/platform/barefoot/docker-syncd-bfn.mk new file mode 100644 index 000000000000..22bb10763e75 --- /dev/null +++ b/platform/barefoot/docker-syncd-bfn.mk @@ -0,0 +1,15 @@ +# docker image for syncd + +DOCKER_SYNCD_BFN = docker-syncd-bfn.gz +$(DOCKER_SYNCD_BFN)_PATH = $(PLATFORM_PATH)/docker-syncd-bfn +$(DOCKER_SYNCD_BFN)_DEPENDS += $(SYNCD) +$(DOCKER_SYNCD_BFN)_LOAD_DOCKERS += $(DOCKER_CONFIG_ENGINE) +SONIC_DOCKER_IMAGES += $(DOCKER_SYNCD_BFN) +ifneq ($(ENABLE_SYNCD_RPC),y) +SONIC_INSTALL_DOCKER_IMAGES += $(DOCKER_SYNCD_BFN) +endif + +$(DOCKER_SYNCD_BFN)_CONTAINER_NAME = syncd +$(DOCKER_SYNCD_BFN)_RUN_OPT += --net=host --privileged -t +$(DOCKER_SYNCD_BFN)_RUN_OPT += -v /host/machine.conf:/etc/machine.conf +$(DOCKER_SYNCD_BFN)_RUN_OPT += -v /etc/sonic:/etc/sonic:ro diff --git a/platform/barefoot/docker-syncd-bfn/Dockerfile.j2 b/platform/barefoot/docker-syncd-bfn/Dockerfile.j2 new file mode 100755 index 000000000000..3e31e4b94417 --- /dev/null +++ b/platform/barefoot/docker-syncd-bfn/Dockerfile.j2 @@ -0,0 +1,29 @@ +FROM docker-config-engine + +## Make apt-get non-interactive +ENV DEBIAN_FRONTEND=noninteractive + +RUN apt-get update + +COPY \ +{% for deb in docker_syncd_bfn_debs.split(' ') -%} +debs/{{ deb }}{{' '}} +{%- endfor -%} +debs/ + +RUN apt-get install -y libxml2 libpcap-dev libusb-1.0-0-dev libcurl3 libcurl4-gnutls-dev libunwind8-dev + +RUN dpkg -i \ +{% for deb in docker_syncd_bfn_debs.split(' ') -%} +debs/{{ deb }}{{' '}} +{%- endfor %} + +COPY ["start.sh", "/usr/bin/"] +COPY ["supervisord.conf", "/etc/supervisor/conf.d/"] + +## Clean up +RUN apt-get clean -y; apt-get autoclean -y; apt-get autoremove -y +RUN rm -rf /debs + +ENTRYPOINT ["/usr/bin/supervisord"] + diff --git a/platform/barefoot/docker-syncd-bfn/start.sh b/platform/barefoot/docker-syncd-bfn/start.sh new file mode 100755 index 000000000000..1a39db4a9d83 --- /dev/null +++ b/platform/barefoot/docker-syncd-bfn/start.sh @@ -0,0 +1,9 @@ +#!/usr/bin/env bash + +rm -f /var/run/rsyslogd.pid + +supervisorctl start rsyslogd + +. /opt/bfn/install/bin/dma_setup.sh +# . /opt/bfn/install/bin/bf_kdrv_mod_load /opt/bfn/install +LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/opt/bfn/install/lib supervisorctl start syncd diff --git a/platform/barefoot/docker-syncd-bfn/supervisord.conf b/platform/barefoot/docker-syncd-bfn/supervisord.conf new file mode 100644 index 000000000000..1e015fef931f --- /dev/null +++ b/platform/barefoot/docker-syncd-bfn/supervisord.conf @@ -0,0 +1,29 @@ +[supervisord] +logfile_maxbytes=1MB +logfile_backups=2 +nodaemon=true + +[program:start.sh] +command=/usr/bin/start.sh +priority=1 +autostart=true +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog + +[program:rsyslogd] +command=/usr/sbin/rsyslogd -n +priority=2 +autostart=false +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog + +[program:syncd] +command=/usr/bin/syncd_start.sh +priority=3 +autostart=false +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog + diff --git a/platform/barefoot/libsaithrift-dev.mk b/platform/barefoot/libsaithrift-dev.mk new file mode 100644 index 000000000000..c9c8cbb3adca --- /dev/null +++ b/platform/barefoot/libsaithrift-dev.mk @@ -0,0 +1,7 @@ +# libsaithrift-dev package + +LIBSAITHRIFT_DEV_BFN = libsaithrift-dev_0.9.4_amd64.deb +$(LIBSAITHRIFT_DEV_BFN)_SRC_PATH = $(SRC_PATH)/SAI +$(LIBSAITHRIFT_DEV_BFN)_DEPENDS += $(LIBTHRIFT) $(LIBTHRIFT_DEV) $(THRIFT_COMPILER) $(BFN_SAI) $(BFN_SAI_DEV) +$(LIBSAITHRIFT_DEV_BFN)_RDEPENDS += $(LIBTHRIFT) $(BFN_SAI) +#SONIC_DPKG_DEBS += $(LIBSAITHRIFT_DEV_BFN) diff --git a/platform/barefoot/one-image.mk b/platform/barefoot/one-image.mk new file mode 100644 index 000000000000..a7b5d009516d --- /dev/null +++ b/platform/barefoot/one-image.mk @@ -0,0 +1,11 @@ +# sonic one image installer + +SONIC_ONE_IMAGE = sonic-barefoot.bin +$(SONIC_ONE_IMAGE)_MACHINE = barefoot +$(SONIC_ONE_IMAGE)_IMAGE_TYPE = onie +$(SONIC_ONE_IMAGE)_INSTALLS += $(BFN_PLATFORM_MODULE) +$(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(BFN_MONTARA_PLATFORM_MODULE) +$(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(WNC_OSW1800_PLATFORM_MODULE) +$(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(INGRASYS_S9180_32X_PLATFORM_MODULE) +$(SONIC_ONE_IMAGE)_DOCKERS += $(SONIC_INSTALL_DOCKER_IMAGES) +SONIC_INSTALLERS += $(SONIC_ONE_IMAGE) diff --git a/platform/barefoot/platform-modules-bfn-montara.mk b/platform/barefoot/platform-modules-bfn-montara.mk new file mode 100644 index 000000000000..113faf201e41 --- /dev/null +++ b/platform/barefoot/platform-modules-bfn-montara.mk @@ -0,0 +1,11 @@ +# BFN Platform modules + +BFN_MONTARA_PLATFORM_MODULE_VERSION = 1.0 + +export BFN_MONTARA_PLATFORM_MODULE_VERSION + +BFN_MONTARA_PLATFORM_MODULE = platform-modules-bfn-montara_$(BFN_MONTARA_PLATFORM_MODULE_VERSION)_amd64.deb +$(BFN_MONTARA_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-bfn-montara +$(BFN_MONTARA_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) +$(BFN_MONTARA_PLATFORM_MODULE)_PLATFORM = x86_64-accton_wedge100bf_32x-r0 +SONIC_DPKG_DEBS += $(BFN_MONTARA_PLATFORM_MODULE) diff --git a/platform/barefoot/platform-modules-bfn.mk b/platform/barefoot/platform-modules-bfn.mk new file mode 100644 index 000000000000..3f76e94aa0b2 --- /dev/null +++ b/platform/barefoot/platform-modules-bfn.mk @@ -0,0 +1,11 @@ +# BFN Platform modules + +BFN_PLATFORM_MODULE_VERSION = 1.0 + +export BFN_PLATFORM_MODULE_VERSION + +BFN_PLATFORM_MODULE = platform-modules-bfn_$(BFN_PLATFORM_MODULE_VERSION)_amd64.deb +$(BFN_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-bfn +$(BFN_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) +$(BFN_PLATFORM_MODULE)_PLATFORM = x86_64-accton_wedge100bf_65x-r0 +SONIC_DPKG_DEBS += $(BFN_PLATFORM_MODULE) diff --git a/platform/barefoot/platform-modules-ingrasys.mk b/platform/barefoot/platform-modules-ingrasys.mk new file mode 100644 index 000000000000..7204adb7e02d --- /dev/null +++ b/platform/barefoot/platform-modules-ingrasys.mk @@ -0,0 +1,11 @@ +# Ingrasys S9180-32X Platform modules + +INGRASYS_S9180_32X_PLATFORM_MODULE_VERSION = 1.1.0 + +export INGRASYS_S9180_32X_PLATFORM_MODULE_VERSION + +INGRASYS_S9180_32X_PLATFORM_MODULE = sonic-platform-ingrasys-s9180-32x_$(INGRASYS_S9180_32X_PLATFORM_MODULE_VERSION)_amd64.deb +$(INGRASYS_S9180_32X_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-ingrasys +$(INGRASYS_S9180_32X_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) +$(INGRASYS_S9180_32X_PLATFORM_MODULE)_PLATFORM = x86_64-ingrasys_s9180_32x-r0 +SONIC_DPKG_DEBS += $(INGRASYS_S9180_32X_PLATFORM_MODULE) diff --git a/platform/barefoot/platform-modules-wnc-osw1800.mk b/platform/barefoot/platform-modules-wnc-osw1800.mk new file mode 100644 index 000000000000..a85ba6b19326 --- /dev/null +++ b/platform/barefoot/platform-modules-wnc-osw1800.mk @@ -0,0 +1,11 @@ +# BFN Platform modules + +WNC_OSW1800_PLATFORM_MODULE_VERSION = 1.0 + +export WNC_OSW1800_PLATFORM_MODULE_VERSION + +WNC_OSW1800_PLATFORM_MODULE = platform-modules-wnc-osw1800_$(WNC_OSW1800_PLATFORM_MODULE_VERSION)_amd64.deb +$(WNC_OSW1800_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-wnc-osw1800 +$(WNC_OSW1800_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) +$(WNC_OSW1800_PLATFORM_MODULE)_PLATFORM = x86_64-wnc_osw1800-r0 +SONIC_DPKG_DEBS += $(WNC_OSW1800_PLATFORM_MODULE) diff --git a/platform/barefoot/platform.conf b/platform/barefoot/platform.conf new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/platform/barefoot/python-saithrift.mk b/platform/barefoot/python-saithrift.mk new file mode 100644 index 000000000000..ba4846402fb8 --- /dev/null +++ b/platform/barefoot/python-saithrift.mk @@ -0,0 +1,6 @@ +# python-saithrift package + +PYTHON_SAITHRIFT_BFN = python-saithrift_0.9.4_amd64.deb +$(PYTHON_SAITHRIFT_BFN)_SRC_PATH = $(SRC_PATH)/SAI +$(PYTHON_SAITHRIFT_BFN)_DEPENDS += $(BFN_SAI_DEV) $(BFN_SAI) $(THRIFT_COMPILER) $(PYTHON_THRIFT) $(LIBTHRIFT_DEV) +#SONIC_DPKG_DEBS += $(PYTHON_SAITHRIFT_BFN) diff --git a/platform/barefoot/rules.mk b/platform/barefoot/rules.mk new file mode 100644 index 000000000000..f10952dfadc2 --- /dev/null +++ b/platform/barefoot/rules.mk @@ -0,0 +1,23 @@ +include $(PLATFORM_PATH)/platform-modules-bfn.mk +include $(PLATFORM_PATH)/platform-modules-bfn-montara.mk +include $(PLATFORM_PATH)/platform-modules-wnc-osw1800.mk +include $(PLATFORM_PATH)/platform-modules-ingrasys.mk +include $(PLATFORM_PATH)/bfn-sai.mk +include $(PLATFORM_PATH)/docker-syncd-bfn.mk +include $(PLATFORM_PATH)/docker-syncd-bfn-rpc.mk +include $(PLATFORM_PATH)/docker-orchagent-bfn.mk +include $(PLATFORM_PATH)/one-image.mk +include $(PLATFORM_PATH)/libsaithrift-dev.mk +include $(PLATFORM_PATH)/python-saithrift.mk +include $(PLATFORM_PATH)/docker-ptf-bfn.mk +include $(PLATFORM_PATH)/bfn-platform.mk +include $(PLATFORM_PATH)/bfn-platform-wnc.mk +include $(PLATFORM_PATH)/bfn-platform-ingrasys.mk +SONIC_ALL += $(SONIC_ONE_IMAGE) \ + $(DOCKER_FPM) + +# Inject sai into sairedis +$(LIBSAIREDIS)_DEPENDS += $(BFN_SAI) $(WNC_OSW1800_PLATFORM) $(BFN_INGRASYS_PLATFORM) $(BFN_PLATFORM) #$(LIBSAITHRIFT_DEV_BFN) + +# Runtime dependency on sai is set only for syncd +$(SYNCD)_RDEPENDS += $(BFN_SAI) $(WNC_OSW1800_PLATFORM) $(BFN_INGRASYS_PLATFORM) $(BFN_PLATFORM) diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/LICENSE b/platform/barefoot/sonic-platform-modules-bfn-montara/LICENSE new file mode 100644 index 000000000000..676cdeec726b --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/LICENSE @@ -0,0 +1,15 @@ +Copyright (C) 2016 Microsoft, Inc + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/MAINTAINERS b/platform/barefoot/sonic-platform-modules-bfn-montara/MAINTAINERS new file mode 100644 index 000000000000..ed64c7824250 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/MAINTAINERS @@ -0,0 +1,3 @@ +# This file describes the maintainers for sonic-platform-modules-bfn +# See the SONiC project governance document for more information +Mailinglist = sonicproject@googlegroups.com diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/README.md b/platform/barefoot/sonic-platform-modules-bfn-montara/README.md new file mode 100644 index 000000000000..5dc055a1d9c3 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/README.md @@ -0,0 +1,2 @@ +# sonic-platform-modules-bfn +Device drivers for support of BFN platform for the SONiC project diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/debian/changelog b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/changelog new file mode 100644 index 000000000000..80c1d96d3445 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/changelog @@ -0,0 +1,5 @@ +platform-modules-bfn-montara (1.0) unstable; urgency=low + + * Initial release + + -- Support Mon, 11 Nov 2015 11:11:11 -0800 diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/debian/compat b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/compat new file mode 100644 index 000000000000..45a4fb75db86 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/compat @@ -0,0 +1 @@ +8 diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/debian/control b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/control new file mode 100644 index 000000000000..2b1a9804baea --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/control @@ -0,0 +1,12 @@ +Source: platform-modules-bfn-montara +Section: main +Priority: extra +Maintainer: Support +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: platform-modules-bfn-montara +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/debian/copyright b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/copyright new file mode 100644 index 000000000000..ade42b7aa75a --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/copyright @@ -0,0 +1,15 @@ +Provides linux kernel driver for BF PCIe devices + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/debian/rules b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/rules new file mode 100755 index 000000000000..e48edc304904 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/debian/rules @@ -0,0 +1,32 @@ +#!/usr/bin/make -f + +export INSTALL_MOD_DIR:=extra + +PACKAGE_NAME := platform-modules-bfn-montara +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MODULE_SRC := $(shell pwd)/modules +SCRIPT_SRC := $(shell pwd)/scripts + +%: + dh $@ + +override_dh_auto_build: + make -C $(KERNEL_SRC)/build M=$(MODULE_SRC) + +override_dh_auto_install: + dh_installdirs -p$(PACKAGE_NAME) $(KERNEL_SRC)/$(INSTALL_MOD_DIR) + cp $(MODULE_SRC)/*.ko debian/$(PACKAGE_NAME)/$(KERNEL_SRC)/$(INSTALL_MOD_DIR) + dh_installdirs -p$(PACKAGE_NAME) usr/local/bin + cp -r $(SCRIPT_SRC)/* debian/$(PACKAGE_NAME)/usr/local/bin + +override_dh_usrlocal: + +override_dh_pysupport: + +override_dh_clean: + dh_clean + rm -f $(MODULE_SRC)/*.o $(MODULE_SRC)/*.ko $(MODULE_SRC)/*.mod.c $(MODULE_SRC)/.*.cmd + rm -f $(MODULE_SRC)/Module.markers $(MODULE_SRC)/Module.symvers $(MODULE_SRC)/modules.order + rm -rf $(MODULE_SRC)/.tmp_versions + diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/modules/Makefile b/platform/barefoot/sonic-platform-modules-bfn-montara/modules/Makefile new file mode 120000 index 000000000000..d394585dd286 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/modules/Makefile @@ -0,0 +1 @@ +../../sonic-platform-modules-bfn/modules/Makefile \ No newline at end of file diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/modules/bf_kdrv.c b/platform/barefoot/sonic-platform-modules-bfn-montara/modules/bf_kdrv.c new file mode 120000 index 000000000000..959d811823c0 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/modules/bf_kdrv.c @@ -0,0 +1 @@ +../../sonic-platform-modules-bfn/modules/bf_kdrv.c \ No newline at end of file diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/modules/bf_tun.c b/platform/barefoot/sonic-platform-modules-bfn-montara/modules/bf_tun.c new file mode 120000 index 000000000000..ea380c3075a7 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/modules/bf_tun.c @@ -0,0 +1 @@ +../../sonic-platform-modules-bfn/modules/bf_tun.c \ No newline at end of file diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/eeprom b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/eeprom new file mode 100755 index 000000000000..07d98556cbbf --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/eeprom @@ -0,0 +1,10 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd eeprom "$@" diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/fancontrol b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/fancontrol new file mode 100755 index 000000000000..515fcbdd69da --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/fancontrol @@ -0,0 +1,11 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd fancontrol "$@" + diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/ps_info b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/ps_info new file mode 100755 index 000000000000..38c9d3330414 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/ps_info @@ -0,0 +1,10 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd ps_info "$@" diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/sensors b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/sensors new file mode 100755 index 000000000000..07af6955321e --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/sensors @@ -0,0 +1,12 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd sensors "$@" + + diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/sfputil b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/sfputil new file mode 100755 index 000000000000..3df67614e499 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/sfputil @@ -0,0 +1,10 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd sfputil "$@" diff --git a/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/test b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/test new file mode 100755 index 000000000000..38327722c91f --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn-montara/scripts/test @@ -0,0 +1 @@ +echo "test" diff --git a/platform/barefoot/sonic-platform-modules-bfn/LICENSE b/platform/barefoot/sonic-platform-modules-bfn/LICENSE new file mode 100644 index 000000000000..676cdeec726b --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/LICENSE @@ -0,0 +1,15 @@ +Copyright (C) 2016 Microsoft, Inc + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/barefoot/sonic-platform-modules-bfn/MAINTAINERS b/platform/barefoot/sonic-platform-modules-bfn/MAINTAINERS new file mode 100644 index 000000000000..b9c62ce01546 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/MAINTAINERS @@ -0,0 +1,4 @@ +# This file describes the maintainers for sonic-platform-modules-bfn +# See the SONiC project governance document for more information + +Mailinglist = sonicproject@googlegroups.com diff --git a/platform/barefoot/sonic-platform-modules-bfn/README.md b/platform/barefoot/sonic-platform-modules-bfn/README.md new file mode 100644 index 000000000000..5dc055a1d9c3 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/README.md @@ -0,0 +1,2 @@ +# sonic-platform-modules-bfn +Device drivers for support of BFN platform for the SONiC project diff --git a/platform/barefoot/sonic-platform-modules-bfn/debian/changelog b/platform/barefoot/sonic-platform-modules-bfn/debian/changelog new file mode 100644 index 000000000000..d5df34112672 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/debian/changelog @@ -0,0 +1,5 @@ +platform-modules-bfn (1.0) unstable; urgency=low + + * Initial release + + -- Support Mon, 11 Nov 2015 11:11:11 -0800 diff --git a/platform/barefoot/sonic-platform-modules-bfn/debian/compat b/platform/barefoot/sonic-platform-modules-bfn/debian/compat new file mode 100644 index 000000000000..45a4fb75db86 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/debian/compat @@ -0,0 +1 @@ +8 diff --git a/platform/barefoot/sonic-platform-modules-bfn/debian/control b/platform/barefoot/sonic-platform-modules-bfn/debian/control new file mode 100644 index 000000000000..09d0cc82d2c3 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/debian/control @@ -0,0 +1,12 @@ +Source: platform-modules-bfn +Section: main +Priority: extra +Maintainer: support +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: platform-modules-bfn +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + diff --git a/platform/barefoot/sonic-platform-modules-bfn/debian/copyright b/platform/barefoot/sonic-platform-modules-bfn/debian/copyright new file mode 100644 index 000000000000..ade42b7aa75a --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/debian/copyright @@ -0,0 +1,15 @@ +Provides linux kernel driver for BF PCIe devices + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/barefoot/sonic-platform-modules-bfn/debian/files b/platform/barefoot/sonic-platform-modules-bfn/debian/files new file mode 100644 index 000000000000..1cfb92c60ae1 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/debian/files @@ -0,0 +1 @@ +platform-modules-bfn_1.0_amd64.deb main extra diff --git a/platform/barefoot/sonic-platform-modules-bfn/debian/rules b/platform/barefoot/sonic-platform-modules-bfn/debian/rules new file mode 100755 index 000000000000..73aa5d84da0b --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/debian/rules @@ -0,0 +1,32 @@ +#!/usr/bin/make -f + +export INSTALL_MOD_DIR:=extra + +PACKAGE_NAME := platform-modules-bfn +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MODULE_SRC := $(shell pwd)/modules +SCRIPT_SRC := $(shell pwd)/scripts + +%: + dh $@ + +override_dh_auto_build: + make -C $(KERNEL_SRC)/build M=$(MODULE_SRC) + +override_dh_auto_install: + dh_installdirs -p$(PACKAGE_NAME) $(KERNEL_SRC)/$(INSTALL_MOD_DIR) + cp $(MODULE_SRC)/*.ko debian/$(PACKAGE_NAME)/$(KERNEL_SRC)/$(INSTALL_MOD_DIR) + dh_installdirs -p$(PACKAGE_NAME) usr/local/bin + cp -r $(SCRIPT_SRC)/* debian/$(PACKAGE_NAME)/usr/local/bin + +override_dh_usrlocal: + +override_dh_pysupport: + +override_dh_clean: + dh_clean + rm -f $(MODULE_SRC)/*.o $(MODULE_SRC)/*.ko $(MODULE_SRC)/*.mod.c $(MODULE_SRC)/.*.cmd + rm -f $(MODULE_SRC)/Module.markers $(MODULE_SRC)/Module.symvers $(MODULE_SRC)/modules.order + rm -rf $(MODULE_SRC)/.tmp_versions + diff --git a/platform/barefoot/sonic-platform-modules-bfn/modules/Makefile b/platform/barefoot/sonic-platform-modules-bfn/modules/Makefile new file mode 100644 index 000000000000..d180b29f6ae2 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := bf_kdrv.o +obj-m += bf_tun.o diff --git a/platform/barefoot/sonic-platform-modules-bfn/modules/bf_kdrv.c b/platform/barefoot/sonic-platform-modules-bfn/modules/bf_kdrv.c new file mode 100644 index 000000000000..fd66ad09493a --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/modules/bf_kdrv.c @@ -0,0 +1,1254 @@ +/******************************************************************************* + * BAREFOOT NETWORKS CONFIDENTIAL & PROPRIETARY + * + * Copyright (c) 2015-2016 Barefoot Networks, Inc. + + * All Rights Reserved. + * + * NOTICE: All information contained herein is, and remains the property of + * Barefoot Networks, Inc. and its suppliers, if any. The intellectual and + * technical concepts contained herein are proprietary to Barefoot Networks, + * Inc. + * and its suppliers and may be covered by U.S. and Foreign Patents, patents in + * process, and are protected by trade secret or copyright law. + * Dissemination of this information or reproduction of this material is + * strictly forbidden unless prior written permission is obtained from + * Barefoot Networks, Inc. + * + * No warranty, explicit or implicit is provided, unless granted under a + * written agreement with Barefoot Networks, Inc. + * + * $Id: $ + * + ******************************************************************************/ +/** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Barefoot Networks. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the... + * + **/ + +/* bf_drv kernel module + * + * This is kernel mode driver for Tofino chip. + * Provides user space mmap service and user space "wait for interrupt" + * and "enable interrupt" services. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 11, 0) + #include +#else + #include +#endif + +#include +#include +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 16, 0) +//#error unsupported linux kernel version +#endif + +/* TBD: Need to build with CONFIG_PCI_MSI */ +extern int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec); +extern int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, int minvec, int maxvec); + +#define PCI_VENDOR_ID_BF 0x1d1c +#define TOFINO_DEV_ID_A0 0x01 +#define TOFINO_DEV_ID_B0 0x10 + +#ifndef PCI_MSIX_ENTRY_SIZE +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 +#define PCI_MSIX_ENTRY_DATA 8 +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 +#endif + +#define BF_CLASS_NAME "bf" +#define BF_MAX_DEVICE_CNT 256 +#define BF_INTR_MODE_NONE_NAME "none" +#define BF_INTR_MODE_LEGACY_NAME "legacy" +#define BF_INTR_MODE_MSI_NAME "msi" +#define BF_INTR_MODE_MSIX_NAME "msix" +#define BF_MAX_BAR_MAPS 6 +#define BF_MSIX_ENTRY_CNT 128 /* TBD make it 512 */ +#define BF_MSI_ENTRY_CNT 2 + +/* interrupt mode */ +enum bf_intr_mode { + BF_INTR_MODE_NONE = 0, + BF_INTR_MODE_LEGACY, + BF_INTR_MODE_MSI, + BF_INTR_MODE_MSIX +}; + +/* device memory */ +struct bf_dev_mem { + const char *name; + phys_addr_t addr; + resource_size_t size; + void __iomem *internal_addr; +}; + +struct bf_listener { + struct bf_pci_dev *bfdev; + s32 event_count[BF_MSIX_ENTRY_CNT]; + int minor; + struct bf_listener *next; +}; + +/* device information */ +struct bf_dev_info { + struct module *owner; + struct device *dev; + int minor; + atomic_t event[BF_MSIX_ENTRY_CNT]; + wait_queue_head_t wait; + const char *version; + struct bf_dev_mem mem[BF_MAX_BAR_MAPS]; + struct msix_entry *msix_entries; + long irq; /* first irq vector */ + int num_irq; /* number of irq vectors */ + unsigned long irq_flags;/* sharable ?? */ + int pci_error_state; /* was there a pci bus error */ +}; + +/* cookie to be passed to IRQ handler, useful especially with MSIX */ +struct bf_int_vector { + struct bf_pci_dev *bf_dev; + int int_vec_offset; +}; + + +/** + * A structure describing the private information for a BF pcie device. + */ +struct bf_pci_dev { + struct bf_dev_info info; + struct pci_dev *pdev; + enum bf_intr_mode mode; + u8 instance; + char name[16]; + struct bf_int_vector bf_int_vec[BF_MSIX_ENTRY_CNT]; + struct bf_listener *listener_head; /* head of a singly linked list of + listeners */ +}; + +/* Keep any global information here that must survive even after the + * bf_pci_dev is free-ed up. + */ +struct bf_global { + struct bf_pci_dev *bfdev ; + struct cdev *bf_cdev; + struct fasync_struct *async_queue; +}; + +static int bf_major; +static int bf_minor[BF_MAX_DEVICE_CNT] = {0}; +static struct class *bf_class = NULL; +static char *intr_mode = NULL; +static enum bf_intr_mode bf_intr_mode_default = BF_INTR_MODE_MSI; +static spinlock_t bf_nonisr_lock; +/* dev->minor should index into this array */ +static struct bf_global bf_global[BF_MAX_DEVICE_CNT]; + +static void bf_add_listener(struct bf_pci_dev *bfdev, + struct bf_listener *listener) +{ + struct bf_listener **cur_listener = &bfdev->listener_head; + + if (!listener) { + return; + } + spin_lock(&bf_nonisr_lock); + + while (*cur_listener) { + cur_listener = &((*cur_listener)->next); + } + *cur_listener = listener; + listener->next = NULL; + + spin_unlock(&bf_nonisr_lock); +} + +static void bf_remove_listener(struct bf_pci_dev *bfdev, + struct bf_listener *listener) +{ + struct bf_listener **cur_listener = &bfdev->listener_head; + + /* in case of certain error conditions, this function might be called after bf_pci_remove() + */ + if (!bfdev || !listener) { + return; + } + spin_lock(&bf_nonisr_lock); + + if (*cur_listener == listener) { + *cur_listener = listener->next; + } else { + while (*cur_listener) { + if ((*cur_listener)->next == listener) { + (*cur_listener)->next = listener->next; + break; + } + cur_listener = &((*cur_listener)->next); + } + listener->next = NULL; + } + + spin_unlock(&bf_nonisr_lock); +} + +/* a pool of minor numbers is maintained */ +/* return the first available minor number */ +static int bf_get_next_minor_no(int *minor) +{ + int i; + + spin_lock(&bf_nonisr_lock); + for(i = 0; i < BF_MAX_DEVICE_CNT; i++) { + if (bf_minor[i] == 0) { + *minor = i; + bf_minor[i] = 1; /* mark it as taken */ + spin_unlock(&bf_nonisr_lock); + return 0; + } + } + *minor = -1; + spin_unlock(&bf_nonisr_lock); + return -1; +} + +/* return a minor number back to the pool for recycling */ +static int bf_return_minor_no(int minor) +{ + int err; + + spin_lock(&bf_nonisr_lock); + if (bf_minor[minor] == 0) { /* was already returned */ + err = -1; /* don't change anything, but return error */ + } else { + bf_minor[minor] = 0; /* mark it as available */ + err = 0; + } + spin_unlock(&bf_nonisr_lock); + return err; +} + +static inline struct bf_pci_dev *bf_get_pci_dev(struct bf_dev_info *info) +{ + return container_of(info, struct bf_pci_dev, info); +} + +/* + * It masks the msix on/off of generating MSI-X messages. + */ +static void +bf_msix_mask_irq(struct msi_desc *desc, int32_t state) +{ + u32 mask_bits = desc->masked; + unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + + PCI_MSIX_ENTRY_VECTOR_CTRL; + + if (state != 0) + mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; + else + mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; + + if (mask_bits != desc->masked) { + writel(mask_bits, desc->mask_base + offset); + readl(desc->mask_base); + desc->masked = mask_bits; + } +} + +/** + * irqcontrol can be used to disable/enable interrupt from user space processes. + * + * @param bf_dev + * pointer to bf_pci_dev + * @param irq_state + * state value. 1 to enable interrupt, 0 to disable interrupt. + * + * @return + * - On success, 0. + * - On failure, a negative value. + */ +static int +bf_pci_irqcontrol(struct bf_pci_dev *bfdev, s32 irq_state) +{ + struct pci_dev *pdev = bfdev->pdev; + + pci_cfg_access_lock(pdev); + if (bfdev->mode == BF_INTR_MODE_LEGACY) + pci_intx(pdev, !!irq_state); + + else if (bfdev->mode == BF_INTR_MODE_MSIX) { + struct msi_desc *desc; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,2,0) + list_for_each_entry(desc, &pdev->msi_list, list) + bf_msix_mask_irq(desc, irq_state); +#else + for_each_pci_msi_entry(desc, pdev) + bf_msix_mask_irq(desc, irq_state); +#endif + } + pci_cfg_access_unlock(pdev); + + return 0; +} + +/** + * interrupt handler which will check if the interrupt is from the right + * device. If so, disable it here and will be enabled later. + */ +static irqreturn_t bf_pci_irqhandler(int irq, struct bf_pci_dev *bfdev) +{ + /* Legacy mode need to mask in hardware */ + if (bfdev->mode == BF_INTR_MODE_LEGACY && + !pci_check_and_mask_intx(bfdev->pdev)) + return IRQ_NONE; + + /* NOTE : if bfdev->info.pci_error_state == 1, then do not access the + * device and return IRQ_NOTHANDLED. + */ + /* Message signal mode, no share IRQ and automasked */ + return IRQ_HANDLED; +} + +/* Remap pci resources described by bar #pci_bar */ +static int +bf_pci_setup_iomem(struct pci_dev *dev, struct bf_dev_info *info, + int n, int pci_bar, const char *name) +{ + unsigned long addr, len; + void *internal_addr; + + if (sizeof(info->mem) / sizeof(info->mem[0]) <= n) + return -EINVAL; + + addr = pci_resource_start(dev, pci_bar); + len = pci_resource_len(dev, pci_bar); + if (addr == 0 || len == 0) + return -1; + internal_addr = pci_ioremap_bar(dev, pci_bar); + if (internal_addr == NULL) + return -1; + info->mem[n].name = name; + info->mem[n].addr = addr; + info->mem[n].internal_addr = internal_addr; + info->mem[n].size = len; + return 0; +} + +/* Unmap previously ioremap'd resources */ +static void +bf_pci_release_iomem(struct bf_dev_info *info) +{ + int i; + + for (i = 0; i < BF_MAX_BAR_MAPS; i++) { + if (info->mem[i].internal_addr) + iounmap(info->mem[i].internal_addr); + } +} + +static int +bf_setup_bars(struct pci_dev *dev, struct bf_dev_info *info) +{ + int i, iom, ret; + unsigned long flags; + static const char *bar_names[BF_MAX_BAR_MAPS] = { + "BAR0", "BAR1", "BAR2", "BAR3", "BAR4", "BAR5", + }; + + iom = 0; + + for (i = 0; i < BF_MAX_BAR_MAPS; i++) { + if (pci_resource_len(dev, i) != 0 && + pci_resource_start(dev, i) != 0) { + flags = pci_resource_flags(dev, i); + if (flags & IORESOURCE_MEM) { + ret = bf_pci_setup_iomem(dev, info, iom, i, bar_names[i]); + if (ret != 0) + return ret; + iom++; + } + } + } + return (iom != 0) ? ret : -ENOENT; +} + +static irqreturn_t bf_interrupt(int irq, void *bfdev_id) +{ + struct bf_pci_dev *bfdev = ((struct bf_int_vector *)bfdev_id)->bf_dev; + int vect_off = ((struct bf_int_vector *)bfdev_id)->int_vec_offset; + + irqreturn_t ret = bf_pci_irqhandler(irq, bfdev); + + if (ret == IRQ_HANDLED) + atomic_inc(&(bfdev->info.event[vect_off])); + + return ret; +} + +static unsigned int bf_poll(struct file *filep, poll_table *wait) +{ + struct bf_listener *listener = (struct bf_listener *)filep->private_data; + struct bf_pci_dev *bfdev = listener->bfdev; + int i; + + if (!bfdev) { + return -ENODEV; + } + if (!bfdev->info.irq) + return -EIO; + + poll_wait(filep, &bfdev->info.wait, wait); + + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) + if (listener->event_count[i] != atomic_read(&bfdev->info.event[i])) + return POLLIN | POLLRDNORM; + return 0; +} + +static int bf_find_mem_index(struct vm_area_struct *vma) +{ + struct bf_pci_dev *bfdev = vma->vm_private_data; + if (vma->vm_pgoff < BF_MAX_BAR_MAPS) { + if (bfdev->info.mem[vma->vm_pgoff].size == 0) + return -1; + return (int)vma->vm_pgoff; + } + return -1; +} + +static const struct vm_operations_struct bf_physical_vm_ops = { +#ifdef CONFIG_HAVE_IOREMAP_PROT + .access = generic_access_phys, +#endif +}; + +static int bf_mmap_physical(struct vm_area_struct *vma) +{ + struct bf_pci_dev *bfdev = vma->vm_private_data; + int bar = bf_find_mem_index(vma); + struct bf_dev_mem *mem; + if (bar < 0) + return -EINVAL; + + mem = bfdev->info.mem + bar; + + if (mem->addr & ~PAGE_MASK) + return -ENODEV; + if (vma->vm_end - vma->vm_start > mem->size) + return -EINVAL; + + vma->vm_ops = &bf_physical_vm_ops; + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + /* + * We cannot use the vm_iomap_memory() helper here, + * because vma->vm_pgoff is the map index we looked + * up above in bf_find_mem_index(), rather than an + * actual page offset into the mmap. + * + * So we just do the physical mmap without a page + * offset. + */ + return remap_pfn_range(vma, vma->vm_start, mem->addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +static int bf_mmap(struct file *filep, struct vm_area_struct *vma) +{ + struct bf_listener *listener = filep->private_data; + struct bf_pci_dev *bfdev = listener->bfdev; + int bar; + unsigned long requested_pages, actual_pages; + + if (!bfdev) { + return -ENODEV; + } + if (vma->vm_end < vma->vm_start) + return -EINVAL; + + vma->vm_private_data = bfdev; + + bar = bf_find_mem_index(vma); + if (bar < 0) + return -EINVAL; + + requested_pages = vma_pages(vma); + actual_pages = ((bfdev->info.mem[bar].addr & ~PAGE_MASK) + + bfdev->info.mem[bar].size + PAGE_SIZE -1) >> PAGE_SHIFT; + if (requested_pages > actual_pages) + return -EINVAL; + + return bf_mmap_physical(vma); +} + +static int bf_fasync(int fd, struct file *filep, int mode) +{ + int minor; + + if (!filep->private_data) { + return (-EINVAL); + } + minor = ((struct bf_listener *)filep->private_data)->minor; + if (minor >= BF_MAX_DEVICE_CNT) { + return (-EINVAL); + } + if (mode == 0 && &bf_global[minor].async_queue == NULL) { + return 0; /* nothing to do */ + } + return (fasync_helper(fd, filep, mode, &bf_global[minor].async_queue)); +} + +static int bf_open(struct inode *inode, struct file *filep) +{ + struct bf_pci_dev *bfdev; + struct bf_listener *listener; + int i; + + bfdev = bf_global[iminor(inode)].bfdev; + listener = kmalloc(sizeof(*listener), GFP_KERNEL); + if (listener) { + listener->bfdev = bfdev; + listener->minor = bfdev->info.minor; + listener->next = NULL; + bf_add_listener(bfdev, listener); + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) + listener->event_count[i] = atomic_read(&bfdev->info.event[i]); + filep->private_data = listener; + return 0; + } else { + return(-ENOMEM); + } +} + +static int bf_release(struct inode *inode, struct file *filep) +{ + struct bf_listener *listener = filep->private_data; + + bf_fasync(-1, filep, 0); /* empty any process id in the notification list */ + if (listener->bfdev) { + bf_remove_listener(listener->bfdev, listener); + } + kfree(listener); + return 0; +} + +/* user space support: make read() system call after poll() of select() */ +static ssize_t bf_read(struct file *filep, char __user *buf, + size_t count, loff_t *ppos) +{ + struct bf_listener *listener = filep->private_data; + struct bf_pci_dev *bfdev = listener->bfdev; + int retval, event_count[BF_MSIX_ENTRY_CNT]; + int i, mismatch_found = 0; /* OR of per vector mismatch */ + unsigned char cnt_match[BF_MSIX_ENTRY_CNT]; /* per vector mismatch */ + + if (!bfdev) { + return -ENODEV; + } + /* irq must be setup for read() to work */ + if (!bfdev->info.irq) + return -EIO; + + /* ensure that there is enough space on user buffer for the given interrupt + * mode */ + if (bfdev->mode == BF_INTR_MODE_MSIX) { + if (count < sizeof(s32)*BF_MSIX_ENTRY_CNT) + return -EINVAL; + count = sizeof(s32)*BF_MSIX_ENTRY_CNT; + } else if (bfdev->mode == BF_INTR_MODE_MSI) { + if (count < sizeof(s32)*BF_MSI_ENTRY_CNT) + return -EINVAL; + count = sizeof(s32)*BF_MSI_ENTRY_CNT; + } else { + if (count < sizeof(s32)) + return -EINVAL; + count = sizeof(s32); + } + + do { + set_current_state(TASK_INTERRUPTIBLE); + + for (i = 0; i < (count/sizeof(s32)); i++) { + event_count[i] = atomic_read(&(bfdev->info.event[i])); + if (event_count[i] != listener->event_count[i]) { + mismatch_found |= 1; + cnt_match[i] = 1; + } else { + event_count[i] = 0; + cnt_match[i] = 0; + } + } + if (mismatch_found) { + __set_current_state(TASK_RUNNING); + if (copy_to_user(buf, &event_count, count)) + retval = -EFAULT; + else { /* adjust the listener->event_count; */ + for (i = 0 ; i < (count/sizeof(s32)); i++) { + if (cnt_match[i]) { + listener->event_count[i] = event_count[i]; + } + } + retval = count; + } + break; + } + + if (filep->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + break; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); + } while (1); + + __set_current_state(TASK_RUNNING); + + return retval; +} + +/* user space is supposed to call this after it is done with interrupt + * processing + */ +static ssize_t bf_write(struct file *filep, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct bf_listener *listener = filep->private_data; + struct bf_pci_dev *bfdev = listener->bfdev; + ssize_t ret; + s32 int_en; + + if (!bfdev || !bfdev->info.irq) + return -EIO; + + if (count != sizeof(s32)) + return -EINVAL; + + if (copy_from_user(&int_en, buf, count)) + return -EFAULT; + + /* clear pci_error_state */ + bfdev->info.pci_error_state = 0; + + ret = bf_pci_irqcontrol(bfdev, int_en); + + return ret ? ret : sizeof(s32); +} + +static const struct file_operations bf_fops = { + .owner = THIS_MODULE, + .open = bf_open, + .release = bf_release, + .read = bf_read, + .write = bf_write, + .mmap = bf_mmap, + .poll = bf_poll, + .fasync = bf_fasync, +}; + +static int bf_major_init(struct bf_pci_dev *bfdev, int minor) +{ + struct cdev *cdev; + static const char name[] = "bf"; + dev_t bf_dev = 0; + int result; + + result = alloc_chrdev_region(&bf_dev, 0, BF_MAX_DEVICE_CNT, name); + if (result) + return result; + + result = -ENOMEM; + cdev = cdev_alloc(); + if (!cdev) { + goto fail_dev_add; + } + cdev->ops = &bf_fops; + cdev->owner = THIS_MODULE; + kobject_set_name(&cdev->kobj, "%s", name); + result = cdev_add(cdev, bf_dev, BF_MAX_DEVICE_CNT); + + if (result) + goto fail_dev_add; + + bf_major = MAJOR(bf_dev); + bf_global[minor].bf_cdev = cdev; + return 0; + +fail_dev_add: + unregister_chrdev_region(bf_dev, BF_MAX_DEVICE_CNT); + return result; +} + +static void bf_major_cleanup(struct bf_pci_dev *bfdev, int minor) +{ + unregister_chrdev_region(MKDEV(bf_major, 0), BF_MAX_DEVICE_CNT); + cdev_del(bf_global[minor].bf_cdev); +} + +static int bf_init_cdev(struct bf_pci_dev *bfdev, int minor) +{ + int ret; + ret = bf_major_init(bfdev, minor); + if (ret) + return ret; + + bf_class = class_create(THIS_MODULE, BF_CLASS_NAME); + if (!bf_class) { + printk(KERN_ERR "create_class failed for bf_dev\n"); + ret = -ENODEV; + goto err_class_register; + } + return 0; + +err_class_register: + bf_major_cleanup(bfdev, minor); + return ret; +} + +static void bf_remove_cdev(struct bf_pci_dev *bfdev) +{ + class_destroy(bf_class); + bf_major_cleanup(bfdev, bfdev->info.minor); +} + + +/** + * bf_register_device - register a new userspace mem device + * @parent: parent device + * @bfdev: bf pci device + * + * returns zero on success or a negative error code. + */ +int bf_register_device(struct device *parent, struct bf_pci_dev *bfdev) +{ + struct bf_dev_info *info = &bfdev->info; + int i, j, ret = 0; + int minor; + + if (!parent || !info || !info->version) + return -EINVAL; + + init_waitqueue_head(&info->wait); + + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) { + atomic_set(&info->event[i], 0); + } + + if (bf_get_next_minor_no(&minor)) { + return -EINVAL; + } + + ret = bf_init_cdev(bfdev, minor); + if (ret) { + printk(KERN_ERR "BF: device cdev creation failed\n"); + return ret; + } + + info->dev = device_create(bf_class, parent, + MKDEV(bf_major, minor), bfdev, + "bf%d", minor); + if (!info->dev) { + printk(KERN_ERR "BF: device creation failed\n"); + return -ENODEV; + } + + info->minor = minor; + + /* bind ISRs and request interrupts */ + if (info->irq && (bfdev->mode != BF_INTR_MODE_NONE)) { + /* + * Note that we deliberately don't use devm_request_irq + * here. The parent module can unregister the UIO device + * and call pci_disable_msi, which requires that this + * irq has been freed. However, the device may have open + * FDs at the time of unregister and therefore may not be + * freed until they are released. + */ + if (bfdev->mode == BF_INTR_MODE_LEGACY) { + ret = request_irq(info->irq, bf_interrupt, + info->irq_flags, bfdev->name, + (void *)&(bfdev->bf_int_vec[0])); + if (ret) { + printk(KERN_ERR "bf failed to request legacy irq %ld error %d\n", + info->irq, ret); + return ret; + } + printk(KERN_NOTICE "BF allocating legacy int vector %ld\n", info->irq); + } else if (bfdev->mode == BF_INTR_MODE_MSIX) { + for (i = 0; i < info->num_irq; i++) { + ret = request_irq(info->msix_entries[i].vector, bf_interrupt, + info->irq_flags, bfdev->name, + (void *)&(bfdev->bf_int_vec[i])); + if (ret) { + /* undo all other previous bindings */ + printk(KERN_ERR "bf failed to request MSIX ret %d itr %d\n", ret, i); + for (j = i - 1; j >= 0; j--) { + free_irq(info->msix_entries[j].vector, + (void *)&(bfdev->bf_int_vec[j])); + } + return ret; + } + } + printk(KERN_NOTICE "BF allocating %d MSIx vectors from %ld\n", + info->num_irq, info->irq); + } else if (bfdev->mode == BF_INTR_MODE_MSI) { + for (i = 0; i < info->num_irq; i++) { + ret = request_irq(info->irq + i, bf_interrupt, + info->irq_flags, bfdev->name, + (void *)&(bfdev->bf_int_vec[i])); + if (ret) { + /* undo all other previous bindings */ + printk(KERN_ERR "bf failed to request MSI ret %d itr %d\n", ret, i); + for (j = i - 1; j >= 0; j--) { + free_irq(info->irq + j, (void *)&(bfdev->bf_int_vec[j])); + } + return ret; + } + } + printk(KERN_NOTICE "BF allocating %d MSI vectors from %ld\n", + info->num_irq, info->irq); + } + } + return 0; +} + +/** + * bf_unregister_device - register a new userspace mem device + * @bfdev: bf pci device + * + * returns none + */ +void bf_unregister_device(struct bf_pci_dev *bfdev) +{ + struct bf_dev_info *info = &bfdev->info; + int i; + + if (info->irq) { + if (bfdev->mode == BF_INTR_MODE_LEGACY) { + free_irq(info->irq, (void *)&(bfdev->bf_int_vec[0])); + } else if (bfdev->mode == BF_INTR_MODE_MSIX) { + for (i = 0; i < info->num_irq; i++) { + free_irq(info->msix_entries[i].vector, (void *)&(bfdev->bf_int_vec[i])); + } + } else if (bfdev->mode == BF_INTR_MODE_MSI) { + for (i = 0; i < info->num_irq; i++) { + free_irq(info->irq + i, (void *)&(bfdev->bf_int_vec[i])); + } + } + } + device_destroy(bf_class, MKDEV(bf_major, info->minor)); + bf_remove_cdev(bfdev); + bf_return_minor_no(info->minor); + return; +} + +static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) +{ + return &pdev->dev; +} + +static int +bf_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct bf_pci_dev *bfdev; + int err, pci_use_highmem; + int i, num_irq; + + memset(bf_global, 0, sizeof(bf_global)); + + bfdev = kzalloc(sizeof(struct bf_pci_dev), GFP_KERNEL); + if (!bfdev) + return -ENOMEM; + + /* init the cookies to be passed to ISRs */ + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) { + bfdev->bf_int_vec[i].int_vec_offset = i; + bfdev->bf_int_vec[i].bf_dev = bfdev; + } + + /* initialize intr_mode to none */ + bfdev->mode = BF_INTR_MODE_NONE; + + /* clear pci_error_state */ + bfdev->info.pci_error_state = 0; + + /* + * enable device + */ + err = pci_enable_device(pdev); + if (err != 0) { + dev_err(&pdev->dev, "Cannot enable PCI device\n"); + goto fail_free; + } + + /* + * reserve device's PCI memory regions for use by this + * module + */ + err = pci_request_regions(pdev, "bf_umem"); + if (err != 0) { + dev_err(&pdev->dev, "Cannot request regions\n"); + goto fail_pci_disable; + } + /* remap IO memory */ + err = bf_setup_bars(pdev, &bfdev->info); + if (err != 0) + goto fail_release_iomem; + + if (!dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)) && + !dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64))) { + pci_use_highmem = 1; + } else { + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), + DMA_BIT_MASK(32)); + if (err) { + dev_err(pci_dev_to_dev(pdev), "No usable DMA " + "configuration, aborting\n"); + goto fail_release_iomem; + } + } + pci_use_highmem = 0; + } + + /* enable pci error reporting */ + /* for the current kernel version, kernel config must have set the followings: + * CONFIG_PCIEPORTBUS=y and CONFIG_PCIEAER = y + * we have pci_error_handlers defined that gets invoked by kernel AER module + * upon detecting the pcie error on this device's addresses. + * However, there seems no way that AER would pass the offending addresses + * to the callback functions. AER logs the error messages on the console. + * This driver's calback function send the SIGIO signal to the user space + * to indicate the error condition. + */ + pci_enable_pcie_error_reporting(pdev); + + /* enable bus mastering on the device */ + pci_set_master(pdev); + + /* fill in bfdev info */ + bfdev->info.version = "0.2"; + bfdev->info.owner = THIS_MODULE; + bfdev->pdev = pdev; + + switch (bf_intr_mode_default) { +#ifdef CONFIG_PCI_MSI + case BF_INTR_MODE_MSIX: + /* Only 1 msi-x vector needed */ + bfdev->info.msix_entries = kcalloc(BF_MSIX_ENTRY_CNT, + sizeof(struct msix_entry), GFP_KERNEL); + if (!bfdev->info.msix_entries) { + err = -ENOMEM; + goto fail_clear_pci_master; + } + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) { + bfdev->info.msix_entries[i].entry= i; + } + num_irq = pci_enable_msix_range(pdev, bfdev->info.msix_entries, + BF_MSIX_ENTRY_CNT, BF_MSIX_ENTRY_CNT); + if (num_irq == BF_MSIX_ENTRY_CNT) { + dev_dbg(&pdev->dev, "using MSI-X"); + bfdev->info.num_irq = num_irq; + bfdev->info.irq = bfdev->info.msix_entries[0].vector; + bfdev->mode = BF_INTR_MODE_MSIX; + printk(KERN_DEBUG "bf using %d MSIX irq from %ld\n", num_irq, + bfdev->info.irq); + break; + } else { + if (num_irq) + pci_disable_msix(pdev); + kfree(bfdev->info.msix_entries); + bfdev->info.msix_entries = NULL; + printk(KERN_ERR "bf error allocating MSIX vectors. Trying MSI...\n"); + /* and, fall back to MSI */ + } + /* ** intentional no-break */ + case BF_INTR_MODE_MSI: + num_irq = pci_enable_msi_range(pdev, BF_MSI_ENTRY_CNT, BF_MSI_ENTRY_CNT); + if (num_irq > 0) { + dev_dbg(&pdev->dev, "using MSI"); + bfdev->info.num_irq = num_irq; + bfdev->info.irq = pdev->irq; + bfdev->mode = BF_INTR_MODE_MSI; + printk(KERN_DEBUG "bf using %d MSI irq from %ld\n", bfdev->info.num_irq, + bfdev->info.irq); + break; + } +#endif /* CONFIG_PCI_MSI */ + /* fall back to Legacy Interrupt, intentional no-break */ + + case BF_INTR_MODE_LEGACY: + if (pci_intx_mask_supported(pdev)) { + dev_dbg(&pdev->dev, "using INTX"); + bfdev->info.irq_flags = IRQF_SHARED; + bfdev->info.irq = pdev->irq; + bfdev->mode = BF_INTR_MODE_LEGACY; + printk(KERN_DEBUG "bf using LEGACY irq %ld\n", bfdev->info.irq); + break; + } + dev_notice(&pdev->dev, "PCI INTx mask not supported\n"); + /* fall back to no Interrupt, intentional no-break */ + case BF_INTR_MODE_NONE: + bfdev->info.irq = 0; + bfdev->info.num_irq = 0; + bfdev->mode = BF_INTR_MODE_NONE; + break; + + default: + dev_err(&pdev->dev, "invalid IRQ mode %u", bf_intr_mode_default); + err = -EINVAL; + goto fail_clear_pci_master; + } + + pci_set_drvdata(pdev, bfdev); + sprintf(bfdev->name, "bf_%d", bfdev->info.minor); + /* register bf driver */ + err = bf_register_device(&pdev->dev, bfdev); + if (err != 0) + goto fail_release_irq; + + bf_global[bfdev->info.minor].async_queue = NULL; + bf_global[bfdev->info.minor].bfdev = bfdev; + + dev_info(&pdev->dev, "bf device %d registered with irq %ld\n", + bfdev->instance, bfdev->info.irq); + printk(KERN_ALERT "bf probe ok\n"); + return 0; + +fail_release_irq: + pci_set_drvdata(pdev, NULL); + if (bfdev->mode == BF_INTR_MODE_MSIX) { + pci_disable_msix(bfdev->pdev); + kfree(bfdev->info.msix_entries); + bfdev->info.msix_entries = NULL; + } + else if (bfdev->mode == BF_INTR_MODE_MSI) + pci_disable_msi(bfdev->pdev); +fail_clear_pci_master: + pci_clear_master(pdev); +fail_release_iomem: + bf_pci_release_iomem(&bfdev->info); + pci_release_regions(pdev); +fail_pci_disable: + pci_disable_device(pdev); +fail_free: + kfree(bfdev); + + printk(KERN_ERR "bf probe not ok\n"); + return err; +} + +static void +bf_pci_remove(struct pci_dev *pdev) +{ + struct bf_pci_dev *bfdev = pci_get_drvdata(pdev); + struct bf_listener *cur_listener; + + bf_unregister_device(bfdev); + if (bfdev->mode == BF_INTR_MODE_MSIX) { + pci_disable_msix(pdev); + kfree(bfdev->info.msix_entries); + bfdev->info.msix_entries = NULL; + } + else if (bfdev->mode == BF_INTR_MODE_MSI) + pci_disable_msi(pdev); + pci_clear_master(pdev); + bf_pci_release_iomem(&bfdev->info); + pci_release_regions(pdev); + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + bf_global[bfdev->info.minor].bfdev = NULL; + /* existing filep structures in open file(s) must be informed that + * bf_pci_dev is no longer valid */ + spin_lock(&bf_nonisr_lock); + cur_listener = bfdev->listener_head; + while (cur_listener) { + cur_listener->bfdev = NULL; + cur_listener = cur_listener->next; + } + spin_unlock(&bf_nonisr_lock); + kfree(bfdev); +} + +/** + * bf_pci_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * called when root complex detects pci error associated with the device + */ +static pci_ers_result_t bf_pci_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct bf_pci_dev *bfdev = pci_get_drvdata(pdev); + int minor; + + if (!bfdev) { + return PCI_ERS_RESULT_NONE; + } + printk(KERN_ERR "pci_err_detected state %d\n", state); + if (state == pci_channel_io_perm_failure || state == pci_channel_io_frozen) { + bfdev->info.pci_error_state = 1; + /* send a signal to the user space program of the error */ + minor = bfdev->info.minor; + if (minor < BF_MAX_DEVICE_CNT && bf_global[minor].async_queue) { + kill_fasync(&bf_global[minor].async_queue, SIGIO, POLL_ERR); + } + return PCI_ERS_RESULT_DISCONNECT; + } else { + return PCI_ERS_RESULT_NONE; + } +} + +/** + * bf_pci_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t bf_pci_slot_reset(struct pci_dev *pdev) +{ + /* nothing to do for now as we do not expect to get backto normal after + * a pcie link reset + * TBD: fill in this function if tofino can recover after an error + */ + return PCI_ERS_RESULT_DISCONNECT; +} + +/** + * bf_pci_resume - called when kernel thinks the device is up on PCIe. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void bf_pci_resume(struct pci_dev *pdev) +{ + /* this function should never be called for Tofinoi */ + struct bf_pci_dev *bfdev = pci_get_drvdata(pdev); + + printk(KERN_ERR "BF io_resume invoked after pci error\n"); + if (bfdev) { + bfdev->info.pci_error_state = 0; + } +} + +static int +bf_config_intr_mode(char *intr_str) +{ + if (!intr_str) { + pr_info("Use MSIX interrupt by default\n"); + return 0; + } + + if (!strcmp(intr_str, BF_INTR_MODE_MSIX_NAME)) { + bf_intr_mode_default = BF_INTR_MODE_MSIX; + pr_info("Use MSIX interrupt\n"); + } else if (!strcmp(intr_str, BF_INTR_MODE_MSI_NAME)) { + bf_intr_mode_default = BF_INTR_MODE_MSI; + pr_info("Use MSI interrupt\n"); + } else if (!strcmp(intr_str, BF_INTR_MODE_LEGACY_NAME)) { + bf_intr_mode_default = BF_INTR_MODE_LEGACY; + pr_info("Use legacy interrupt\n"); + } else { + pr_info("Error: bad parameter - %s\n", intr_str); + return -EINVAL; + } + + return 0; +} + +static const struct pci_device_id bf_pci_tbl[] = { + {PCI_VDEVICE(BF, TOFINO_DEV_ID_A0), 0}, + {PCI_VDEVICE(BF, TOFINO_DEV_ID_B0), 0}, + /* required last entry */ + { .device = 0 } +}; + +/* PCI bus error handlers */ +static struct pci_error_handlers bf_pci_err_handler = { + .error_detected = bf_pci_error_detected, + .slot_reset = bf_pci_slot_reset, + .resume = bf_pci_resume, +}; + +static struct pci_driver bf_pci_driver = { + .name = "bf", + .id_table = bf_pci_tbl, + .probe = bf_pci_probe, + .remove = bf_pci_remove, + .err_handler = &bf_pci_err_handler +}; + +static int __init +bfdrv_init(void) +{ + int ret; + + ret = bf_config_intr_mode(intr_mode); + if (ret < 0) + return ret; + + spin_lock_init(&bf_nonisr_lock); + return pci_register_driver(&bf_pci_driver); +} + +static void __exit +bfdrv_exit(void) +{ + pci_unregister_driver(&bf_pci_driver); +} + +module_init(bfdrv_init); +module_exit(bfdrv_exit); + +module_param(intr_mode, charp, S_IRUGO); +MODULE_PARM_DESC(intr_mode, +"bf interrupt mode (default=msix):\n" +" " BF_INTR_MODE_MSIX_NAME " Use MSIX interrupt\n" +" " BF_INTR_MODE_MSI_NAME " Use MSI interrupt\n" +" " BF_INTR_MODE_LEGACY_NAME " Use Legacy interrupt\n" +"\n"); + +MODULE_DEVICE_TABLE(pci, bf_pci_tbl); +MODULE_DESCRIPTION("Barefoot Tofino PCI device"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Barefoot Networks"); diff --git a/platform/barefoot/sonic-platform-modules-bfn/modules/bf_tun.c b/platform/barefoot/sonic-platform-modules-bfn/modules/bf_tun.c new file mode 100644 index 000000000000..a1ba7047baaa --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/modules/bf_tun.c @@ -0,0 +1,2396 @@ +/* + * TUN - Universal TUN/TAP device driver. + * Copyright (C) 1999-2002 Maxim Krasnyansky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * $Id: tun.c,v 1.15 2002/03/01 02:44:24 maxk Exp $ + */ + +/* + * Changes: + * + * Mike Kershaw 2005/08/14 + * Add TUNSETLINK ioctl to set the link encapsulation + * + * Mark Smith + * Use eth_random_addr() for tap MAC address. + * + * Harald Roelle 2004/04/20 + * Fixes in packet dropping, queue length setting and queue wakeup. + * Increased default tx queue length. + * Added ethtool API. + * Minor cleanups + * + * Daniel Podlejski + * Modifications for 2.3.99-pre5 kernel. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "bf_tun" +#define DRV_VERSION "1.6" +#define DRV_DESCRIPTION "Universal TUN/TAP device driver" +#define DRV_COPYRIGHT "(C) 1999-2004 Max Krasnyansky " + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Uncomment to enable debugging */ +/* #define TUN_DEBUG 1 */ + +#define TUN_MINOR1 201 + +#ifdef TUN_DEBUG +static int debug; + +#define tun_debug(level, tun, fmt, args...) \ +do { \ + if (tun->debug) \ + netdev_printk(level, tun->dev, fmt, ##args); \ +} while (0) +#define DBG1(level, fmt, args...) \ +do { \ + if (debug == 2) \ + printk(level fmt, ##args); \ +} while (0) +#else +#define tun_debug(level, tun, fmt, args...) \ +do { \ + if (0) \ + netdev_printk(level, tun->dev, fmt, ##args); \ +} while (0) +#define DBG1(level, fmt, args...) \ +do { \ + if (0) \ + printk(level fmt, ##args); \ +} while (0) +#endif + +#define GOODCOPY_LEN 128 + +#define FLT_EXACT_COUNT 8 +struct tap_filter { + unsigned int count; /* Number of addrs. Zero means disabled */ + u32 mask[2]; /* Mask of the hashed addrs */ + unsigned char addr[FLT_EXACT_COUNT][ETH_ALEN]; +}; + +/* DEFAULT_MAX_NUM_RSS_QUEUES were chosen to let the rx/tx queues allocated for + * the netdevice to be fit in one page. So we can make sure the success of + * memory allocation. TODO: increase the limit. */ +#define MAX_TAP_QUEUES DEFAULT_MAX_NUM_RSS_QUEUES +#define MAX_TAP_FLOWS 4096 + +#define TUN_FLOW_EXPIRE (3 * HZ) + +/* A tun_file connects an open character device to a tuntap netdevice. It + * also contains all socket related structures (except sock_fprog and tap_filter) + * to serve as one transmit queue for tuntap device. The sock_fprog and + * tap_filter were kept in tun_struct since they were used for filtering for the + * netdevice not for a specific queue (at least I didn't see the requirement for + * this). + * + * RCU usage: + * The tun_file and tun_struct are loosely coupled, the pointer from one to the + * other can only be read while rcu_read_lock or rtnl_lock is held. + */ +struct tun_file { + struct sock sk; + struct socket socket; + struct socket_wq wq; + struct tun_struct __rcu *tun; + struct net *net; + struct fasync_struct *fasync; + /* only used for fasnyc */ + unsigned int flags; + union { + u16 queue_index; + unsigned int ifindex; + }; + struct list_head next; + struct tun_struct *detached; +}; + +struct tun_flow_entry { + struct hlist_node hash_link; + struct rcu_head rcu; + struct tun_struct *tun; + + u32 rxhash; + u32 rps_rxhash; + int queue_index; + unsigned long updated; +}; + +#define TUN_NUM_FLOW_ENTRIES 1024 + +/* Since the socket were moved to tun_file, to preserve the behavior of persist + * device, socket filter, sndbuf and vnet header size were restore when the + * file were attached to a persist device. + */ +struct tun_struct { + struct tun_file __rcu *tfiles[MAX_TAP_QUEUES]; + unsigned int numqueues; + unsigned int flags; + kuid_t owner; + kgid_t group; + + struct net_device *dev; + netdev_features_t set_features; +#define TUN_USER_FEATURES (NETIF_F_HW_CSUM|NETIF_F_TSO_ECN|NETIF_F_TSO| \ + NETIF_F_TSO6|NETIF_F_UFO) + + int vnet_hdr_sz; + int sndbuf; + struct tap_filter txflt; + struct sock_fprog fprog; + /* protected by rtnl lock */ + bool filter_attached; +#ifdef TUN_DEBUG + int debug; +#endif + spinlock_t lock; + struct hlist_head flows[TUN_NUM_FLOW_ENTRIES]; + struct timer_list flow_gc_timer; + unsigned long ageing_time; + unsigned int numdisabled; + struct list_head disabled; + void *security; + u32 flow_count; +}; + +static inline u32 tun_hashfn(u32 rxhash) +{ + return rxhash & 0x3ff; +} + +static struct tun_flow_entry *tun_flow_find(struct hlist_head *head, u32 rxhash) +{ + struct tun_flow_entry *e; + + hlist_for_each_entry_rcu(e, head, hash_link) { + if (e->rxhash == rxhash) + return e; + } + return NULL; +} + +static struct tun_flow_entry *tun_flow_create(struct tun_struct *tun, + struct hlist_head *head, + u32 rxhash, u16 queue_index) +{ + struct tun_flow_entry *e = kmalloc(sizeof(*e), GFP_ATOMIC); + + if (e) { + tun_debug(KERN_INFO, tun, "create flow: hash %u index %u\n", + rxhash, queue_index); + e->updated = jiffies; + e->rxhash = rxhash; + e->rps_rxhash = 0; + e->queue_index = queue_index; + e->tun = tun; + hlist_add_head_rcu(&e->hash_link, head); + ++tun->flow_count; + } + return e; +} + +static void tun_flow_delete(struct tun_struct *tun, struct tun_flow_entry *e) +{ + tun_debug(KERN_INFO, tun, "delete flow: hash %u index %u\n", + e->rxhash, e->queue_index); + sock_rps_reset_flow_hash(e->rps_rxhash); + hlist_del_rcu(&e->hash_link); + kfree_rcu(e, rcu); + --tun->flow_count; +} + +static void tun_flow_flush(struct tun_struct *tun) +{ + int i; + + spin_lock_bh(&tun->lock); + for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) { + struct tun_flow_entry *e; + struct hlist_node *n; + + hlist_for_each_entry_safe(e, n, &tun->flows[i], hash_link) + tun_flow_delete(tun, e); + } + spin_unlock_bh(&tun->lock); +} + +static void tun_flow_delete_by_queue(struct tun_struct *tun, u16 queue_index) +{ + int i; + + spin_lock_bh(&tun->lock); + for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) { + struct tun_flow_entry *e; + struct hlist_node *n; + + hlist_for_each_entry_safe(e, n, &tun->flows[i], hash_link) { + if (e->queue_index == queue_index) + tun_flow_delete(tun, e); + } + } + spin_unlock_bh(&tun->lock); +} + +static void tun_flow_cleanup(unsigned long data) +{ + struct tun_struct *tun = (struct tun_struct *)data; + unsigned long delay = tun->ageing_time; + unsigned long next_timer = jiffies + delay; + unsigned long count = 0; + int i; + + tun_debug(KERN_INFO, tun, "tun_flow_cleanup\n"); + + spin_lock_bh(&tun->lock); + for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) { + struct tun_flow_entry *e; + struct hlist_node *n; + + hlist_for_each_entry_safe(e, n, &tun->flows[i], hash_link) { + unsigned long this_timer; + count++; + this_timer = e->updated + delay; + if (time_before_eq(this_timer, jiffies)) + tun_flow_delete(tun, e); + else if (time_before(this_timer, next_timer)) + next_timer = this_timer; + } + } + + if (count) + mod_timer(&tun->flow_gc_timer, round_jiffies_up(next_timer)); + spin_unlock_bh(&tun->lock); +} + +static void tun_flow_update(struct tun_struct *tun, u32 rxhash, + struct tun_file *tfile) +{ + struct hlist_head *head; + struct tun_flow_entry *e; + unsigned long delay = tun->ageing_time; + u16 queue_index = tfile->queue_index; + + if (!rxhash) + return; + else + head = &tun->flows[tun_hashfn(rxhash)]; + + rcu_read_lock(); + + /* We may get a very small possibility of OOO during switching, not + * worth to optimize.*/ + if (tun->numqueues == 1 || tfile->detached) + goto unlock; + + e = tun_flow_find(head, rxhash); + if (likely(e)) { + /* TODO: keep queueing to old queue until it's empty? */ + e->queue_index = queue_index; + e->updated = jiffies; + sock_rps_record_flow_hash(e->rps_rxhash); + } else { + spin_lock_bh(&tun->lock); + if (!tun_flow_find(head, rxhash) && + tun->flow_count < MAX_TAP_FLOWS) + tun_flow_create(tun, head, rxhash, queue_index); + + if (!timer_pending(&tun->flow_gc_timer)) + mod_timer(&tun->flow_gc_timer, + round_jiffies_up(jiffies + delay)); + spin_unlock_bh(&tun->lock); + } + +unlock: + rcu_read_unlock(); +} + +/** + * Save the hash received in the stack receive path and update the + * flow_hash table accordingly. + */ +static inline void tun_flow_save_rps_rxhash(struct tun_flow_entry *e, u32 hash) +{ + if (unlikely(e->rps_rxhash != hash)) { + sock_rps_reset_flow_hash(e->rps_rxhash); + e->rps_rxhash = hash; + } +} + +/* We try to identify a flow through its rxhash first. The reason that + * we do not check rxq no. is because some cards(e.g 82599), chooses + * the rxq based on the txq where the last packet of the flow comes. As + * the userspace application move between processors, we may get a + * different rxq no. here. If we could not get rxhash, then we would + * hope the rxq no. may help here. + */ +static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb, + void *accel_priv, select_queue_fallback_t fallback) +{ + struct tun_struct *tun = netdev_priv(dev); + struct tun_flow_entry *e; + u32 txq = 0; + u32 numqueues = 0; + + rcu_read_lock(); + numqueues = ACCESS_ONCE(tun->numqueues); + + txq = skb_get_hash(skb); + if (txq) { + e = tun_flow_find(&tun->flows[tun_hashfn(txq)], txq); + if (e) { + tun_flow_save_rps_rxhash(e, txq); + txq = e->queue_index; + } else + /* use multiply and shift instead of expensive divide */ + txq = ((u64)txq * numqueues) >> 32; + } else if (likely(skb_rx_queue_recorded(skb))) { + txq = skb_get_rx_queue(skb); + while (unlikely(txq >= numqueues)) + txq -= numqueues; + } + + rcu_read_unlock(); + return txq; +} + +static inline bool tun_not_capable(struct tun_struct *tun) +{ + const struct cred *cred = current_cred(); + struct net *net = dev_net(tun->dev); + + return ((uid_valid(tun->owner) && !uid_eq(cred->euid, tun->owner)) || + (gid_valid(tun->group) && !in_egroup_p(tun->group))) && + !ns_capable(net->user_ns, CAP_NET_ADMIN); +} + +static void tun_set_real_num_queues(struct tun_struct *tun) +{ + netif_set_real_num_tx_queues(tun->dev, tun->numqueues); + netif_set_real_num_rx_queues(tun->dev, tun->numqueues); +} + +static void tun_disable_queue(struct tun_struct *tun, struct tun_file *tfile) +{ + tfile->detached = tun; + list_add_tail(&tfile->next, &tun->disabled); + ++tun->numdisabled; +} + +static struct tun_struct *tun_enable_queue(struct tun_file *tfile) +{ + struct tun_struct *tun = tfile->detached; + + tfile->detached = NULL; + list_del_init(&tfile->next); + --tun->numdisabled; + return tun; +} + +static void tun_queue_purge(struct tun_file *tfile) +{ + skb_queue_purge(&tfile->sk.sk_receive_queue); + skb_queue_purge(&tfile->sk.sk_error_queue); +} + +static void __tun_detach(struct tun_file *tfile, bool clean) +{ + struct tun_file *ntfile; + struct tun_struct *tun; + + tun = rtnl_dereference(tfile->tun); + + if (tun && !tfile->detached) { + u16 index = tfile->queue_index; + BUG_ON(index >= tun->numqueues); + + rcu_assign_pointer(tun->tfiles[index], + tun->tfiles[tun->numqueues - 1]); + ntfile = rtnl_dereference(tun->tfiles[index]); + ntfile->queue_index = index; + + --tun->numqueues; + if (clean) { + RCU_INIT_POINTER(tfile->tun, NULL); + sock_put(&tfile->sk); + } else + tun_disable_queue(tun, tfile); + + synchronize_net(); + tun_flow_delete_by_queue(tun, tun->numqueues + 1); + /* Drop read queue */ + tun_queue_purge(tfile); + tun_set_real_num_queues(tun); + } else if (tfile->detached && clean) { + tun = tun_enable_queue(tfile); + sock_put(&tfile->sk); + } + + if (clean) { + if (tun && tun->numqueues == 0 && tun->numdisabled == 0) { + netif_carrier_off(tun->dev); + + if (!(tun->flags & TUN_PERSIST) && + tun->dev->reg_state == NETREG_REGISTERED) + unregister_netdevice(tun->dev); + } + + BUG_ON(!test_bit(SOCK_EXTERNALLY_ALLOCATED, + &tfile->socket.flags)); + sk_release_kernel(&tfile->sk); + } +} + +static void tun_detach(struct tun_file *tfile, bool clean) +{ + rtnl_lock(); + __tun_detach(tfile, clean); + rtnl_unlock(); +} + +static void tun_detach_all(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + struct tun_file *tfile, *tmp; + int i, n = tun->numqueues; + + for (i = 0; i < n; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + BUG_ON(!tfile); + tfile->socket.sk->sk_data_ready(tfile->socket.sk); + RCU_INIT_POINTER(tfile->tun, NULL); + --tun->numqueues; + } + list_for_each_entry(tfile, &tun->disabled, next) { + tfile->socket.sk->sk_data_ready(tfile->socket.sk); + RCU_INIT_POINTER(tfile->tun, NULL); + } + BUG_ON(tun->numqueues != 0); + + synchronize_net(); + for (i = 0; i < n; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + /* Drop read queue */ + tun_queue_purge(tfile); + sock_put(&tfile->sk); + } + list_for_each_entry_safe(tfile, tmp, &tun->disabled, next) { + tun_enable_queue(tfile); + tun_queue_purge(tfile); + sock_put(&tfile->sk); + } + BUG_ON(tun->numdisabled != 0); + + if (tun->flags & TUN_PERSIST) + module_put(THIS_MODULE); +} + +static int tun_attach(struct tun_struct *tun, struct file *file, bool skip_filter) +{ + struct tun_file *tfile = file->private_data; + int err; + + err = security_tun_dev_attach(tfile->socket.sk, tun->security); + if (err < 0) + goto out; + + err = -EINVAL; + if (rtnl_dereference(tfile->tun) && !tfile->detached) + goto out; + + err = -EBUSY; + if (!(tun->flags & TUN_TAP_MQ) && tun->numqueues == 1) + goto out; + + err = -E2BIG; + if (!tfile->detached && + tun->numqueues + tun->numdisabled == MAX_TAP_QUEUES) + goto out; + + err = 0; + + /* Re-attach the filter to persist device */ + if (!skip_filter && (tun->filter_attached == true)) { + err = __sk_attach_filter(&tun->fprog, tfile->socket.sk, + lockdep_rtnl_is_held()); + if (!err) + goto out; + } + tfile->queue_index = tun->numqueues; + rcu_assign_pointer(tfile->tun, tun); + rcu_assign_pointer(tun->tfiles[tun->numqueues], tfile); + tun->numqueues++; + + if (tfile->detached) + tun_enable_queue(tfile); + else + sock_hold(&tfile->sk); + + tun_set_real_num_queues(tun); + + /* device is allowed to go away first, so no need to hold extra + * refcnt. + */ + +out: + return err; +} + +static struct tun_struct *__tun_get(struct tun_file *tfile) +{ + struct tun_struct *tun; + + rcu_read_lock(); + tun = rcu_dereference(tfile->tun); + if (tun) + dev_hold(tun->dev); + rcu_read_unlock(); + + return tun; +} + +static struct tun_struct *tun_get(struct file *file) +{ + return __tun_get(file->private_data); +} + +static void tun_put(struct tun_struct *tun) +{ + dev_put(tun->dev); +} + +/* TAP filtering */ +static void addr_hash_set(u32 *mask, const u8 *addr) +{ + int n = ether_crc(ETH_ALEN, addr) >> 26; + mask[n >> 5] |= (1 << (n & 31)); +} + +static unsigned int addr_hash_test(const u32 *mask, const u8 *addr) +{ + int n = ether_crc(ETH_ALEN, addr) >> 26; + return mask[n >> 5] & (1 << (n & 31)); +} + +static int update_filter(struct tap_filter *filter, void __user *arg) +{ + struct { u8 u[ETH_ALEN]; } *addr; + struct tun_filter uf; + int err, alen, n, nexact; + + if (copy_from_user(&uf, arg, sizeof(uf))) + return -EFAULT; + + if (!uf.count) { + /* Disabled */ + filter->count = 0; + return 0; + } + + alen = ETH_ALEN * uf.count; + addr = kmalloc(alen, GFP_KERNEL); + if (!addr) + return -ENOMEM; + + if (copy_from_user(addr, arg + sizeof(uf), alen)) { + err = -EFAULT; + goto done; + } + + /* The filter is updated without holding any locks. Which is + * perfectly safe. We disable it first and in the worst + * case we'll accept a few undesired packets. */ + filter->count = 0; + wmb(); + + /* Use first set of addresses as an exact filter */ + for (n = 0; n < uf.count && n < FLT_EXACT_COUNT; n++) + memcpy(filter->addr[n], addr[n].u, ETH_ALEN); + + nexact = n; + + /* Remaining multicast addresses are hashed, + * unicast will leave the filter disabled. */ + memset(filter->mask, 0, sizeof(filter->mask)); + for (; n < uf.count; n++) { + if (!is_multicast_ether_addr(addr[n].u)) { + err = 0; /* no filter */ + goto done; + } + addr_hash_set(filter->mask, addr[n].u); + } + + /* For ALLMULTI just set the mask to all ones. + * This overrides the mask populated above. */ + if ((uf.flags & TUN_FLT_ALLMULTI)) + memset(filter->mask, ~0, sizeof(filter->mask)); + + /* Now enable the filter */ + wmb(); + filter->count = nexact; + + /* Return the number of exact filters */ + err = nexact; + +done: + kfree(addr); + return err; +} + +/* Returns: 0 - drop, !=0 - accept */ +static int run_filter(struct tap_filter *filter, const struct sk_buff *skb) +{ + /* Cannot use eth_hdr(skb) here because skb_mac_hdr() is incorrect + * at this point. */ + struct ethhdr *eh = (struct ethhdr *) skb->data; + int i; + + /* Exact match */ + for (i = 0; i < filter->count; i++) + if (ether_addr_equal(eh->h_dest, filter->addr[i])) + return 1; + + /* Inexact match (multicast only) */ + if (is_multicast_ether_addr(eh->h_dest)) + return addr_hash_test(filter->mask, eh->h_dest); + + return 0; +} + +/* + * Checks whether the packet is accepted or not. + * Returns: 0 - drop, !=0 - accept + */ +static int check_filter(struct tap_filter *filter, const struct sk_buff *skb) +{ + if (!filter->count) + return 1; + + return run_filter(filter, skb); +} + +/* Network device part of the driver */ + +static const struct ethtool_ops tun_ethtool_ops; + +/* Net device detach from fd. */ +static void tun_net_uninit(struct net_device *dev) +{ + tun_detach_all(dev); +} + +/* Net device open. */ +static int tun_net_open(struct net_device *dev) +{ + netif_tx_start_all_queues(dev); + return 0; +} + +/* Net device close. */ +static int tun_net_close(struct net_device *dev) +{ + netif_tx_stop_all_queues(dev); + return 0; +} + +/* Net device start xmit */ +static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + int txq = skb->queue_mapping; + struct tun_file *tfile; + u32 numqueues = 0; + + rcu_read_lock(); + tfile = rcu_dereference(tun->tfiles[txq]); + numqueues = ACCESS_ONCE(tun->numqueues); + + /* Drop packet if interface is not attached */ + if (txq >= numqueues) + goto drop; + + if (numqueues == 1) { + /* Select queue was not called for the skbuff, so we extract the + * RPS hash and save it into the flow_table here. + */ + __u32 rxhash; + + rxhash = skb_get_hash(skb); + if (rxhash) { + struct tun_flow_entry *e; + e = tun_flow_find(&tun->flows[tun_hashfn(rxhash)], + rxhash); + if (e) + tun_flow_save_rps_rxhash(e, rxhash); + } + } + + tun_debug(KERN_INFO, tun, "tun_net_xmit %d\n", skb->len); + + BUG_ON(!tfile); + + /* Drop if the filter does not like it. + * This is a noop if the filter is disabled. + * Filter can be enabled only for the TAP devices. */ + if (!check_filter(&tun->txflt, skb)) + goto drop; + + if (tfile->socket.sk->sk_filter && + sk_filter(tfile->socket.sk, skb)) + goto drop; + + /* Limit the number of packets queued by dividing txq length with the + * number of queues. + */ + if (skb_queue_len(&tfile->socket.sk->sk_receive_queue) * numqueues + >= dev->tx_queue_len) + goto drop; + + if (unlikely(skb_orphan_frags(skb, GFP_ATOMIC))) + goto drop; + + if (skb->sk) { + sock_tx_timestamp(skb->sk, &skb_shinfo(skb)->tx_flags); + sw_tx_timestamp(skb); + } + + /* Orphan the skb - required as we might hang on to it + * for indefinite time. + */ + skb_orphan(skb); + + nf_reset(skb); + + /* Enqueue packet */ + skb_queue_tail(&tfile->socket.sk->sk_receive_queue, skb); + + /* Notify and wake up reader process */ + if (tfile->flags & TUN_FASYNC) + kill_fasync(&tfile->fasync, SIGIO, POLL_IN); + tfile->socket.sk->sk_data_ready(tfile->socket.sk); + + rcu_read_unlock(); + return NETDEV_TX_OK; + +drop: + dev->stats.tx_dropped++; + skb_tx_error(skb); + kfree_skb(skb); + rcu_read_unlock(); + return NETDEV_TX_OK; +} + +static void tun_net_mclist(struct net_device *dev) +{ + /* + * This callback is supposed to deal with mc filter in + * _rx_ path and has nothing to do with the _tx_ path. + * In rx path we always accept everything userspace gives us. + */ +} + +#define MIN_MTU 68 +#define MAX_MTU 65535 + +static int +tun_net_change_mtu(struct net_device *dev, int new_mtu) +{ + if (new_mtu < MIN_MTU || new_mtu + dev->hard_header_len > MAX_MTU) + return -EINVAL; + dev->mtu = new_mtu; + return 0; +} + +static netdev_features_t tun_net_fix_features(struct net_device *dev, + netdev_features_t features) +{ + struct tun_struct *tun = netdev_priv(dev); + + return (features & tun->set_features) | (features & ~TUN_USER_FEATURES); +} + +static int +tun_change_carrier(struct net_device *dev, bool new_carrier) { + if (new_carrier) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void tun_poll_controller(struct net_device *dev) +{ + /* + * Tun only receives frames when: + * 1) the char device endpoint gets data from user space + * 2) the tun socket gets a sendmsg call from user space + * Since both of those are synchronous operations, we are guaranteed + * never to have pending data when we poll for it + * so there is nothing to do here but return. + * We need this though so netpoll recognizes us as an interface that + * supports polling, which enables bridge devices in virt setups to + * still use netconsole + */ + return; +} +#endif +static const struct net_device_ops tun_netdev_ops = { + .ndo_uninit = tun_net_uninit, + .ndo_open = tun_net_open, + .ndo_stop = tun_net_close, + .ndo_start_xmit = tun_net_xmit, + .ndo_change_mtu = tun_net_change_mtu, + .ndo_fix_features = tun_net_fix_features, + .ndo_select_queue = tun_select_queue, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif +}; + +static const struct net_device_ops tap_netdev_ops = { + .ndo_uninit = tun_net_uninit, + .ndo_open = tun_net_open, + .ndo_stop = tun_net_close, + .ndo_start_xmit = tun_net_xmit, + .ndo_change_mtu = tun_net_change_mtu, + .ndo_fix_features = tun_net_fix_features, + .ndo_set_rx_mode = tun_net_mclist, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_select_queue = tun_select_queue, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif + .ndo_change_carrier = tun_change_carrier, +}; + +static void tun_flow_init(struct tun_struct *tun) +{ + int i; + + for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) + INIT_HLIST_HEAD(&tun->flows[i]); + + tun->ageing_time = TUN_FLOW_EXPIRE; + setup_timer(&tun->flow_gc_timer, tun_flow_cleanup, (unsigned long)tun); + mod_timer(&tun->flow_gc_timer, + round_jiffies_up(jiffies + tun->ageing_time)); +} + +static void tun_flow_uninit(struct tun_struct *tun) +{ + del_timer_sync(&tun->flow_gc_timer); + tun_flow_flush(tun); +} + +/* Initialize net device. */ +static void tun_net_init(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + + switch (tun->flags & TUN_TYPE_MASK) { + case TUN_TUN_DEV: + dev->netdev_ops = &tun_netdev_ops; + + /* Point-to-Point TUN Device */ + dev->hard_header_len = 0; + dev->addr_len = 0; + dev->mtu = 1500; + + /* Zero header length */ + dev->type = ARPHRD_NONE; + dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; + dev->tx_queue_len = TUN_READQ_SIZE*2; /* We prefer our own queue length */ + break; + + case TUN_TAP_DEV: + dev->netdev_ops = &tap_netdev_ops; + /* Ethernet TAP Device */ + ether_setup(dev); + dev->priv_flags &= ~IFF_TX_SKB_SHARING; + dev->priv_flags |= IFF_LIVE_ADDR_CHANGE; + + eth_hw_addr_random(dev); + + dev->tx_queue_len = TUN_READQ_SIZE*2; /* We prefer our own queue length */ + break; + } +} + +/* Character device part */ + +/* Poll */ +static unsigned int tun_chr_poll(struct file *file, poll_table *wait) +{ + struct tun_file *tfile = file->private_data; + struct tun_struct *tun = __tun_get(tfile); + struct sock *sk; + unsigned int mask = 0; + + if (!tun) + return POLLERR; + + sk = tfile->socket.sk; + + tun_debug(KERN_INFO, tun, "tun_chr_poll\n"); + + poll_wait(file, sk_sleep(sk), wait); + + if (!skb_queue_empty(&sk->sk_receive_queue)) + mask |= POLLIN | POLLRDNORM; + + if (sock_writeable(sk) || + (!test_and_set_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags) && + sock_writeable(sk))) + mask |= POLLOUT | POLLWRNORM; + + if (tun->dev->reg_state != NETREG_REGISTERED) + mask = POLLERR; + + tun_put(tun); + return mask; +} + +/* prepad is the amount to reserve at front. len is length after that. + * linear is a hint as to how much to copy (usually headers). */ +static struct sk_buff *tun_alloc_skb(struct tun_file *tfile, + size_t prepad, size_t len, + size_t linear, int noblock) +{ + struct sock *sk = tfile->socket.sk; + struct sk_buff *skb; + int err; + + /* Under a page? Don't bother with paged skb. */ + if (prepad + len < PAGE_SIZE || !linear) + linear = len; + + skb = sock_alloc_send_pskb(sk, prepad + linear, len - linear, noblock, + &err, 0); + if (!skb) + return ERR_PTR(err); + + skb_reserve(skb, prepad); + skb_put(skb, linear); + skb->data_len = len - linear; + skb->len += len - linear; + + return skb; +} + +/* Get packet from user space buffer */ +static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, + void *msg_control, const struct iovec *iv, + size_t total_len, size_t count, int noblock) +{ + struct tun_pi pi = { 0, cpu_to_be16(ETH_P_IP) }; + struct sk_buff *skb; + size_t len = total_len, align = NET_SKB_PAD, linear; + struct virtio_net_hdr gso = { 0 }; + int good_linear; + int offset = 0; + int copylen; + bool zerocopy = false; + int err; + u32 rxhash; + + if (!(tun->flags & TUN_NO_PI)) { + if (len < sizeof(pi)) + return -EINVAL; + len -= sizeof(pi); + + if (memcpy_fromiovecend((void *)&pi, iv, 0, sizeof(pi))) + return -EFAULT; + offset += sizeof(pi); + } + + if (tun->flags & TUN_VNET_HDR) { + if (len < tun->vnet_hdr_sz) + return -EINVAL; + len -= tun->vnet_hdr_sz; + + if (memcpy_fromiovecend((void *)&gso, iv, offset, sizeof(gso))) + return -EFAULT; + + if ((gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) && + gso.csum_start + gso.csum_offset + 2 > gso.hdr_len) + gso.hdr_len = gso.csum_start + gso.csum_offset + 2; + + if (gso.hdr_len > len) + return -EINVAL; + offset += tun->vnet_hdr_sz; + } + + if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) { + align += NET_IP_ALIGN; + if (unlikely(len < ETH_HLEN || + (gso.hdr_len && gso.hdr_len < ETH_HLEN))) + return -EINVAL; + } + + good_linear = SKB_MAX_HEAD(align); + + if (msg_control) { + /* There are 256 bytes to be copied in skb, so there is + * enough room for skb expand head in case it is used. + * The rest of the buffer is mapped from userspace. + */ + copylen = gso.hdr_len ? gso.hdr_len : GOODCOPY_LEN; + if (copylen > good_linear) + copylen = good_linear; + linear = copylen; + if (iov_pages(iv, offset + copylen, count) <= MAX_SKB_FRAGS) + zerocopy = true; + } + + if (!zerocopy) { + copylen = len; + if (gso.hdr_len > good_linear) + linear = good_linear; + else + linear = gso.hdr_len; + } + + skb = tun_alloc_skb(tfile, align, copylen, linear, noblock); + if (IS_ERR(skb)) { + if (PTR_ERR(skb) != -EAGAIN) + tun->dev->stats.rx_dropped++; + return PTR_ERR(skb); + } + + if (zerocopy) + err = zerocopy_sg_from_iovec(skb, iv, offset, count); + else { + err = skb_copy_datagram_from_iovec(skb, 0, iv, offset, len); + if (!err && msg_control) { + struct ubuf_info *uarg = msg_control; + uarg->callback(uarg, false); + } + } + + if (err) { + tun->dev->stats.rx_dropped++; + kfree_skb(skb); + return -EFAULT; + } + + if (gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) { + if (!skb_partial_csum_set(skb, gso.csum_start, + gso.csum_offset)) { + tun->dev->stats.rx_frame_errors++; + kfree_skb(skb); + return -EINVAL; + } + } + + switch (tun->flags & TUN_TYPE_MASK) { + case TUN_TUN_DEV: + if (tun->flags & TUN_NO_PI) { + switch (skb->data[0] & 0xf0) { + case 0x40: + pi.proto = htons(ETH_P_IP); + break; + case 0x60: + pi.proto = htons(ETH_P_IPV6); + break; + default: + tun->dev->stats.rx_dropped++; + kfree_skb(skb); + return -EINVAL; + } + } + + skb_reset_mac_header(skb); + skb->protocol = pi.proto; + skb->dev = tun->dev; + break; + case TUN_TAP_DEV: + skb->protocol = eth_type_trans(skb, tun->dev); + break; + } + + skb_reset_network_header(skb); + + if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) { + pr_debug("GSO!\n"); + switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { + case VIRTIO_NET_HDR_GSO_TCPV4: + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; + break; + case VIRTIO_NET_HDR_GSO_TCPV6: + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; + break; + case VIRTIO_NET_HDR_GSO_UDP: + skb_shinfo(skb)->gso_type = SKB_GSO_UDP; + if (skb->protocol == htons(ETH_P_IPV6)) + ipv6_proxy_select_ident(skb); + break; + default: + tun->dev->stats.rx_frame_errors++; + kfree_skb(skb); + return -EINVAL; + } + + if (gso.gso_type & VIRTIO_NET_HDR_GSO_ECN) + skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN; + + skb_shinfo(skb)->gso_size = gso.gso_size; + if (skb_shinfo(skb)->gso_size == 0) { + tun->dev->stats.rx_frame_errors++; + kfree_skb(skb); + return -EINVAL; + } + + /* Header must be checked, and gso_segs computed. */ + skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY; + skb_shinfo(skb)->gso_segs = 0; + } + + /* copy skb_ubuf_info for callback when skb has no error */ + if (zerocopy) { + skb_shinfo(skb)->destructor_arg = msg_control; + skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY; + skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG; + } + + skb_probe_transport_header(skb, 0); + + rxhash = skb_get_hash(skb); + netif_rx_ni(skb); + + tun->dev->stats.rx_packets++; + tun->dev->stats.rx_bytes += len; + + tun_flow_update(tun, rxhash, tfile); + return total_len; +} + +static ssize_t tun_chr_aio_write(struct kiocb *iocb, const struct iovec *iv, + unsigned long count, loff_t pos) +{ + struct file *file = iocb->ki_filp; + struct tun_struct *tun = tun_get(file); + struct tun_file *tfile = file->private_data; + ssize_t result; + + if (!tun) + return -EBADFD; + + tun_debug(KERN_INFO, tun, "tun_chr_write %ld\n", count); + + result = tun_get_user(tun, tfile, NULL, iv, iov_length(iv, count), + count, file->f_flags & O_NONBLOCK); + + tun_put(tun); + return result; +} + +/* Put packet to the user space buffer */ +static ssize_t tun_put_user(struct tun_struct *tun, + struct tun_file *tfile, + struct sk_buff *skb, + const struct iovec *iv, int len) +{ + struct tun_pi pi = { 0, skb->protocol }; + ssize_t total = 0; + int vlan_offset = 0, copied; + int vlan_hlen = 0; + + if (vlan_tx_tag_present(skb)) + vlan_hlen = VLAN_HLEN; + + if (!(tun->flags & TUN_NO_PI)) { + if ((len -= sizeof(pi)) < 0) + return -EINVAL; + + if (len < skb->len) { + /* Packet will be striped */ + pi.flags |= TUN_PKT_STRIP; + } + + if (memcpy_toiovecend(iv, (void *) &pi, 0, sizeof(pi))) + return -EFAULT; + total += sizeof(pi); + } + + if (tun->flags & TUN_VNET_HDR) { + struct virtio_net_hdr gso = { 0 }; /* no info leak */ + if ((len -= tun->vnet_hdr_sz) < 0) + return -EINVAL; + + if (skb_is_gso(skb)) { + struct skb_shared_info *sinfo = skb_shinfo(skb); + + /* This is a hint as to how much should be linear. */ + gso.hdr_len = skb_headlen(skb); + gso.gso_size = sinfo->gso_size; + if (sinfo->gso_type & SKB_GSO_TCPV4) + gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; + else if (sinfo->gso_type & SKB_GSO_TCPV6) + gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; + else if (sinfo->gso_type & SKB_GSO_UDP) + gso.gso_type = VIRTIO_NET_HDR_GSO_UDP; + else { + pr_err("unexpected GSO type: " + "0x%x, gso_size %d, hdr_len %d\n", + sinfo->gso_type, gso.gso_size, + gso.hdr_len); + print_hex_dump(KERN_ERR, "tun: ", + DUMP_PREFIX_NONE, + 16, 1, skb->head, + min((int)gso.hdr_len, 64), true); + WARN_ON_ONCE(1); + return -EINVAL; + } + if (sinfo->gso_type & SKB_GSO_TCP_ECN) + gso.gso_type |= VIRTIO_NET_HDR_GSO_ECN; + } else + gso.gso_type = VIRTIO_NET_HDR_GSO_NONE; + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + gso.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM; + gso.csum_start = skb_checksum_start_offset(skb) + + vlan_hlen; + gso.csum_offset = skb->csum_offset; + } else if (skb->ip_summed == CHECKSUM_UNNECESSARY) { + gso.flags = VIRTIO_NET_HDR_F_DATA_VALID; + } /* else everything is zero */ + + if (unlikely(memcpy_toiovecend(iv, (void *)&gso, total, + sizeof(gso)))) + return -EFAULT; + total += tun->vnet_hdr_sz; + } + + copied = total; + len = min_t(int, skb->len + vlan_hlen, len); + total += skb->len + vlan_hlen; + if (vlan_hlen) { + int copy, ret; + struct { + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + } veth; + + veth.h_vlan_proto = skb->vlan_proto; + veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb)); + + vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto); + + copy = min_t(int, vlan_offset, len); + ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy); + len -= copy; + copied += copy; + if (ret || !len) + goto done; + + copy = min_t(int, sizeof(veth), len); + ret = memcpy_toiovecend(iv, (void *)&veth, copied, copy); + len -= copy; + copied += copy; + if (ret || !len) + goto done; + } + + skb_copy_datagram_const_iovec(skb, vlan_offset, iv, copied, len); + +done: + tun->dev->stats.tx_packets++; + tun->dev->stats.tx_bytes += len; + + return total; +} + +static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile, + const struct iovec *iv, ssize_t len, int noblock) +{ + struct sk_buff *skb; + ssize_t ret = 0; + int peeked, err, off = 0; + + tun_debug(KERN_INFO, tun, "tun_do_read\n"); + + if (!len) + return ret; + + if (tun->dev->reg_state != NETREG_REGISTERED) + return -EIO; + + /* Read frames from queue */ + skb = __skb_recv_datagram(tfile->socket.sk, noblock ? MSG_DONTWAIT : 0, + &peeked, &off, &err); + if (skb) { + ret = tun_put_user(tun, tfile, skb, iv, len); + kfree_skb(skb); + } else + ret = err; + + return ret; +} + +static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv, + unsigned long count, loff_t pos) +{ + struct file *file = iocb->ki_filp; + struct tun_file *tfile = file->private_data; + struct tun_struct *tun = __tun_get(tfile); + ssize_t len, ret; + + if (!tun) + return -EBADFD; + len = iov_length(iv, count); + if (len < 0) { + ret = -EINVAL; + goto out; + } + + ret = tun_do_read(tun, tfile, iv, len, + file->f_flags & O_NONBLOCK); + ret = min_t(ssize_t, ret, len); + if (ret > 0) + iocb->ki_pos = ret; +out: + tun_put(tun); + return ret; +} + +static void tun_free_netdev(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + + BUG_ON(!(list_empty(&tun->disabled))); + tun_flow_uninit(tun); + security_tun_dev_free_security(tun->security); + free_netdev(dev); +} + +static void tun_setup(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + + tun->owner = INVALID_UID; + tun->group = INVALID_GID; + + dev->ethtool_ops = &tun_ethtool_ops; + dev->destructor = tun_free_netdev; +} + +/* Trivial set of netlink ops to allow deleting tun or tap + * device with netlink. + */ +static int tun_validate(struct nlattr *tb[], struct nlattr *data[]) +{ + return -EINVAL; +} + +static struct rtnl_link_ops tun_link_ops __read_mostly = { + .kind = DRV_NAME, + .priv_size = sizeof(struct tun_struct), + .setup = tun_setup, + .validate = tun_validate, +}; + +static void tun_sock_write_space(struct sock *sk) +{ + struct tun_file *tfile; + wait_queue_head_t *wqueue; + + if (!sock_writeable(sk)) + return; + + if (!test_and_clear_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags)) + return; + + wqueue = sk_sleep(sk); + if (wqueue && waitqueue_active(wqueue)) + wake_up_interruptible_sync_poll(wqueue, POLLOUT | + POLLWRNORM | POLLWRBAND); + + tfile = container_of(sk, struct tun_file, sk); + kill_fasync(&tfile->fasync, SIGIO, POLL_OUT); +} + +static int tun_sendmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *m, size_t total_len) +{ + int ret; + struct tun_file *tfile = container_of(sock, struct tun_file, socket); + struct tun_struct *tun = __tun_get(tfile); + + if (!tun) + return -EBADFD; + ret = tun_get_user(tun, tfile, m->msg_control, m->msg_iov, total_len, + m->msg_iovlen, m->msg_flags & MSG_DONTWAIT); + tun_put(tun); + return ret; +} + +static int tun_recvmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *m, size_t total_len, + int flags) +{ + struct tun_file *tfile = container_of(sock, struct tun_file, socket); + struct tun_struct *tun = __tun_get(tfile); + int ret; + + if (!tun) + return -EBADFD; + + if (flags & ~(MSG_DONTWAIT|MSG_TRUNC|MSG_ERRQUEUE)) { + ret = -EINVAL; + goto out; + } + if (flags & MSG_ERRQUEUE) { + ret = sock_recv_errqueue(sock->sk, m, total_len, + SOL_PACKET, TUN_TX_TIMESTAMP); + goto out; + } + ret = tun_do_read(tun, tfile, m->msg_iov, total_len, + flags & MSG_DONTWAIT); + if (ret > total_len) { + m->msg_flags |= MSG_TRUNC; + ret = flags & MSG_TRUNC ? ret : total_len; + } +out: + tun_put(tun); + return ret; +} + +static int tun_release(struct socket *sock) +{ + if (sock->sk) + sock_put(sock->sk); + return 0; +} + +/* Ops structure to mimic raw sockets with tun */ +static const struct proto_ops tun_socket_ops = { + .sendmsg = tun_sendmsg, + .recvmsg = tun_recvmsg, + .release = tun_release, +}; + +static struct proto tun_proto = { + .name = "bf_tun", + .owner = THIS_MODULE, + .obj_size = sizeof(struct tun_file), +}; + +static int tun_flags(struct tun_struct *tun) +{ + int flags = 0; + + if (tun->flags & TUN_TUN_DEV) + flags |= IFF_TUN; + else + flags |= IFF_TAP; + + if (tun->flags & TUN_NO_PI) + flags |= IFF_NO_PI; + + /* This flag has no real effect. We track the value for backwards + * compatibility. + */ + if (tun->flags & TUN_ONE_QUEUE) + flags |= IFF_ONE_QUEUE; + + if (tun->flags & TUN_VNET_HDR) + flags |= IFF_VNET_HDR; + + if (tun->flags & TUN_TAP_MQ) + flags |= IFF_MULTI_QUEUE; + + if (tun->flags & TUN_PERSIST) + flags |= IFF_PERSIST; + + return flags; +} + +static ssize_t tun_show_flags(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct tun_struct *tun = netdev_priv(to_net_dev(dev)); + return sprintf(buf, "0x%x\n", tun_flags(tun)); +} + +static ssize_t tun_show_owner(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct tun_struct *tun = netdev_priv(to_net_dev(dev)); + return uid_valid(tun->owner)? + sprintf(buf, "%u\n", + from_kuid_munged(current_user_ns(), tun->owner)): + sprintf(buf, "-1\n"); +} + +static ssize_t tun_show_group(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct tun_struct *tun = netdev_priv(to_net_dev(dev)); + return gid_valid(tun->group) ? + sprintf(buf, "%u\n", + from_kgid_munged(current_user_ns(), tun->group)): + sprintf(buf, "-1\n"); +} + +static DEVICE_ATTR(tun_flags, 0444, tun_show_flags, NULL); +static DEVICE_ATTR(owner, 0444, tun_show_owner, NULL); +static DEVICE_ATTR(group, 0444, tun_show_group, NULL); + +static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) +{ + struct tun_struct *tun; + struct tun_file *tfile = file->private_data; + struct net_device *dev; + int err; + + if (tfile->detached) + return -EINVAL; + + dev = __dev_get_by_name(net, ifr->ifr_name); + if (dev) { + if (ifr->ifr_flags & IFF_TUN_EXCL) + return -EBUSY; + if ((ifr->ifr_flags & IFF_TUN) && dev->netdev_ops == &tun_netdev_ops) + tun = netdev_priv(dev); + else if ((ifr->ifr_flags & IFF_TAP) && dev->netdev_ops == &tap_netdev_ops) + tun = netdev_priv(dev); + else + return -EINVAL; + + if (!!(ifr->ifr_flags & IFF_MULTI_QUEUE) != + !!(tun->flags & TUN_TAP_MQ)) + return -EINVAL; + + if (tun_not_capable(tun)) + return -EPERM; + err = security_tun_dev_open(tun->security); + if (err < 0) + return err; + + err = tun_attach(tun, file, ifr->ifr_flags & IFF_NOFILTER); + if (err < 0) + return err; + + if (tun->flags & TUN_TAP_MQ && + (tun->numqueues + tun->numdisabled > 1)) { + /* One or more queue has already been attached, no need + * to initialize the device again. + */ + return 0; + } + } + else { + char *name; + unsigned long flags = 0; + int queues = ifr->ifr_flags & IFF_MULTI_QUEUE ? + MAX_TAP_QUEUES : 1; + + if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) + return -EPERM; + err = security_tun_dev_create(); + if (err < 0) + return err; + + /* Set dev type */ + if (ifr->ifr_flags & IFF_TUN) { + /* TUN device */ + flags |= TUN_TUN_DEV; + name = "tun%d"; + } else if (ifr->ifr_flags & IFF_TAP) { + /* TAP device */ + flags |= TUN_TAP_DEV; + name = "tap%d"; + } else + return -EINVAL; + + if (*ifr->ifr_name) + name = ifr->ifr_name; + + dev = alloc_netdev_mqs(sizeof(struct tun_struct), name, + tun_setup, queues, queues); + + if (!dev) + return -ENOMEM; + + dev_net_set(dev, net); + dev->rtnl_link_ops = &tun_link_ops; + dev->ifindex = tfile->ifindex; + + tun = netdev_priv(dev); + tun->dev = dev; + tun->flags = flags; + tun->txflt.count = 0; + tun->vnet_hdr_sz = sizeof(struct virtio_net_hdr); + + tun->filter_attached = false; + tun->sndbuf = tfile->socket.sk->sk_sndbuf; + + spin_lock_init(&tun->lock); + + err = security_tun_dev_alloc_security(&tun->security); + if (err < 0) + goto err_free_dev; + + tun_net_init(dev); + tun_flow_init(tun); + + dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST | + TUN_USER_FEATURES | NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_STAG_TX; + dev->features = dev->hw_features; + dev->vlan_features = dev->features & + ~(NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_STAG_TX); + + INIT_LIST_HEAD(&tun->disabled); + err = tun_attach(tun, file, false); + if (err < 0) + goto err_free_flow; + + err = register_netdevice(tun->dev); + if (err < 0) + goto err_detach; + + if (device_create_file(&tun->dev->dev, &dev_attr_tun_flags) || + device_create_file(&tun->dev->dev, &dev_attr_owner) || + device_create_file(&tun->dev->dev, &dev_attr_group)) + pr_err("Failed to create tun sysfs files\n"); + } + + netif_carrier_on(tun->dev); + + tun_debug(KERN_INFO, tun, "tun_set_iff\n"); + + if (ifr->ifr_flags & IFF_NO_PI) + tun->flags |= TUN_NO_PI; + else + tun->flags &= ~TUN_NO_PI; + + /* This flag has no real effect. We track the value for backwards + * compatibility. + */ + if (ifr->ifr_flags & IFF_ONE_QUEUE) + tun->flags |= TUN_ONE_QUEUE; + else + tun->flags &= ~TUN_ONE_QUEUE; + + if (ifr->ifr_flags & IFF_VNET_HDR) + tun->flags |= TUN_VNET_HDR; + else + tun->flags &= ~TUN_VNET_HDR; + + if (ifr->ifr_flags & IFF_MULTI_QUEUE) + tun->flags |= TUN_TAP_MQ; + else + tun->flags &= ~TUN_TAP_MQ; + + /* Make sure persistent devices do not get stuck in + * xoff state. + */ + if (netif_running(tun->dev)) + netif_tx_wake_all_queues(tun->dev); + + strcpy(ifr->ifr_name, tun->dev->name); + return 0; + +err_detach: + tun_detach_all(dev); +err_free_flow: + tun_flow_uninit(tun); + security_tun_dev_free_security(tun->security); +err_free_dev: + free_netdev(dev); + return err; +} + +static void tun_get_iff(struct net *net, struct tun_struct *tun, + struct ifreq *ifr) +{ + tun_debug(KERN_INFO, tun, "tun_get_iff\n"); + + strcpy(ifr->ifr_name, tun->dev->name); + + ifr->ifr_flags = tun_flags(tun); + +} + +/* This is like a cut-down ethtool ops, except done via tun fd so no + * privs required. */ +static int set_offload(struct tun_struct *tun, unsigned long arg) +{ + netdev_features_t features = 0; + + if (arg & TUN_F_CSUM) { + features |= NETIF_F_HW_CSUM; + arg &= ~TUN_F_CSUM; + + if (arg & (TUN_F_TSO4|TUN_F_TSO6)) { + if (arg & TUN_F_TSO_ECN) { + features |= NETIF_F_TSO_ECN; + arg &= ~TUN_F_TSO_ECN; + } + if (arg & TUN_F_TSO4) + features |= NETIF_F_TSO; + if (arg & TUN_F_TSO6) + features |= NETIF_F_TSO6; + arg &= ~(TUN_F_TSO4|TUN_F_TSO6); + } + + if (arg & TUN_F_UFO) { + features |= NETIF_F_UFO; + arg &= ~TUN_F_UFO; + } + } + + /* This gives the user a way to test for new features in future by + * trying to set them. */ + if (arg) + return -EINVAL; + + tun->set_features = features; + netdev_update_features(tun->dev); + + return 0; +} + +static void tun_detach_filter(struct tun_struct *tun, int n) +{ + int i; + struct tun_file *tfile; + + for (i = 0; i < n; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + __sk_detach_filter(tfile->socket.sk, lockdep_rtnl_is_held()); + } + + tun->filter_attached = false; +} + +static int tun_attach_filter(struct tun_struct *tun) +{ + int i, ret = 0; + struct tun_file *tfile; + + for (i = 0; i < tun->numqueues; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + ret = __sk_attach_filter(&tun->fprog, tfile->socket.sk, + lockdep_rtnl_is_held()); + if (ret) { + tun_detach_filter(tun, i); + return ret; + } + } + + tun->filter_attached = true; + return ret; +} + +static void tun_set_sndbuf(struct tun_struct *tun) +{ + struct tun_file *tfile; + int i; + + for (i = 0; i < tun->numqueues; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + tfile->socket.sk->sk_sndbuf = tun->sndbuf; + } +} + +static int tun_set_queue(struct file *file, struct ifreq *ifr) +{ + struct tun_file *tfile = file->private_data; + struct tun_struct *tun; + int ret = 0; + + rtnl_lock(); + + if (ifr->ifr_flags & IFF_ATTACH_QUEUE) { + tun = tfile->detached; + if (!tun) { + ret = -EINVAL; + goto unlock; + } + ret = security_tun_dev_attach_queue(tun->security); + if (ret < 0) + goto unlock; + ret = tun_attach(tun, file, false); + } else if (ifr->ifr_flags & IFF_DETACH_QUEUE) { + tun = rtnl_dereference(tfile->tun); + if (!tun || !(tun->flags & TUN_TAP_MQ) || tfile->detached) + ret = -EINVAL; + else + __tun_detach(tfile, false); + } else + ret = -EINVAL; + +unlock: + rtnl_unlock(); + return ret; +} + +static long __tun_chr_ioctl(struct file *file, unsigned int cmd, + unsigned long arg, int ifreq_len) +{ + struct tun_file *tfile = file->private_data; + struct tun_struct *tun; + void __user* argp = (void __user*)arg; + struct ifreq ifr; + kuid_t owner; + kgid_t group; + int sndbuf; + int vnet_hdr_sz; + unsigned int ifindex; + int ret; + + if (cmd == TUNSETIFF || cmd == TUNSETQUEUE || _IOC_TYPE(cmd) == 0x89) { + if (copy_from_user(&ifr, argp, ifreq_len)) + return -EFAULT; + } else { + memset(&ifr, 0, sizeof(ifr)); + } + if (cmd == TUNGETFEATURES) { + /* Currently this just means: "what IFF flags are valid?". + * This is needed because we never checked for invalid flags on + * TUNSETIFF. */ + return put_user(IFF_TUN | IFF_TAP | IFF_NO_PI | IFF_ONE_QUEUE | + IFF_VNET_HDR | IFF_MULTI_QUEUE, + (unsigned int __user*)argp); + } else if (cmd == TUNSETQUEUE) + return tun_set_queue(file, &ifr); + + ret = 0; + rtnl_lock(); + + tun = __tun_get(tfile); + if (cmd == TUNSETIFF && !tun) { + ifr.ifr_name[IFNAMSIZ-1] = '\0'; + + ret = tun_set_iff(tfile->net, file, &ifr); + + if (ret) + goto unlock; + + if (copy_to_user(argp, &ifr, ifreq_len)) + ret = -EFAULT; + goto unlock; + } + if (cmd == TUNSETIFINDEX) { + ret = -EPERM; + if (tun) + goto unlock; + + ret = -EFAULT; + if (copy_from_user(&ifindex, argp, sizeof(ifindex))) + goto unlock; + + ret = 0; + tfile->ifindex = ifindex; + goto unlock; + } + + ret = -EBADFD; + if (!tun) + goto unlock; + + tun_debug(KERN_INFO, tun, "tun_chr_ioctl cmd %u\n", cmd); + + ret = 0; + switch (cmd) { + case TUNGETIFF: + tun_get_iff(current->nsproxy->net_ns, tun, &ifr); + + if (tfile->detached) + ifr.ifr_flags |= IFF_DETACH_QUEUE; + if (!tfile->socket.sk->sk_filter) + ifr.ifr_flags |= IFF_NOFILTER; + + if (copy_to_user(argp, &ifr, ifreq_len)) + ret = -EFAULT; + break; + + case TUNSETNOCSUM: + /* Disable/Enable checksum */ + + /* [unimplemented] */ + tun_debug(KERN_INFO, tun, "ignored: set checksum %s\n", + arg ? "disabled" : "enabled"); + break; + + case TUNSETPERSIST: + /* Disable/Enable persist mode. Keep an extra reference to the + * module to prevent the module being unprobed. + */ + if (arg && !(tun->flags & TUN_PERSIST)) { + tun->flags |= TUN_PERSIST; + __module_get(THIS_MODULE); + } + if (!arg && (tun->flags & TUN_PERSIST)) { + tun->flags &= ~TUN_PERSIST; + module_put(THIS_MODULE); + } + + tun_debug(KERN_INFO, tun, "persist %s\n", + arg ? "enabled" : "disabled"); + break; + + case TUNSETOWNER: + /* Set owner of the device */ + owner = make_kuid(current_user_ns(), arg); + if (!uid_valid(owner)) { + ret = -EINVAL; + break; + } + tun->owner = owner; + tun_debug(KERN_INFO, tun, "owner set to %u\n", + from_kuid(&init_user_ns, tun->owner)); + break; + + case TUNSETGROUP: + /* Set group of the device */ + group = make_kgid(current_user_ns(), arg); + if (!gid_valid(group)) { + ret = -EINVAL; + break; + } + tun->group = group; + tun_debug(KERN_INFO, tun, "group set to %u\n", + from_kgid(&init_user_ns, tun->group)); + break; + + case TUNSETLINK: + /* Only allow setting the type when the interface is down */ + if (tun->dev->flags & IFF_UP) { + tun_debug(KERN_INFO, tun, + "Linktype set failed because interface is up\n"); + ret = -EBUSY; + } else { + tun->dev->type = (int) arg; + tun_debug(KERN_INFO, tun, "linktype set to %d\n", + tun->dev->type); + ret = 0; + } + break; + +#ifdef TUN_DEBUG + case TUNSETDEBUG: + tun->debug = arg; + break; +#endif + case TUNSETOFFLOAD: + ret = set_offload(tun, arg); + break; + + case TUNSETTXFILTER: + /* Can be set only for TAPs */ + ret = -EINVAL; + if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV) + break; + ret = update_filter(&tun->txflt, (void __user *)arg); + break; + + case SIOCGIFHWADDR: + /* Get hw address */ + memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN); + ifr.ifr_hwaddr.sa_family = tun->dev->type; + if (copy_to_user(argp, &ifr, ifreq_len)) + ret = -EFAULT; + break; + + case SIOCSIFHWADDR: + /* Set hw address */ + tun_debug(KERN_DEBUG, tun, "set hw address: %pM\n", + ifr.ifr_hwaddr.sa_data); + + ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr); + break; + + case TUNGETSNDBUF: + sndbuf = tfile->socket.sk->sk_sndbuf; + if (copy_to_user(argp, &sndbuf, sizeof(sndbuf))) + ret = -EFAULT; + break; + + case TUNSETSNDBUF: + if (copy_from_user(&sndbuf, argp, sizeof(sndbuf))) { + ret = -EFAULT; + break; + } + + tun->sndbuf = sndbuf; + tun_set_sndbuf(tun); + break; + + case TUNGETVNETHDRSZ: + vnet_hdr_sz = tun->vnet_hdr_sz; + if (copy_to_user(argp, &vnet_hdr_sz, sizeof(vnet_hdr_sz))) + ret = -EFAULT; + break; + + case TUNSETVNETHDRSZ: + if (copy_from_user(&vnet_hdr_sz, argp, sizeof(vnet_hdr_sz))) { + ret = -EFAULT; + break; + } + if (vnet_hdr_sz < (int)sizeof(struct virtio_net_hdr)) { + ret = -EINVAL; + break; + } + + tun->vnet_hdr_sz = vnet_hdr_sz; + break; + + case TUNATTACHFILTER: + /* Can be set only for TAPs */ + ret = -EINVAL; + if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV) + break; + ret = -EFAULT; + if (copy_from_user(&tun->fprog, argp, sizeof(tun->fprog))) + break; + + ret = tun_attach_filter(tun); + break; + + case TUNDETACHFILTER: + /* Can be set only for TAPs */ + ret = -EINVAL; + if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV) + break; + ret = 0; + tun_detach_filter(tun, tun->numqueues); + break; + + case TUNGETFILTER: + ret = -EINVAL; + if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV) + break; + ret = -EFAULT; + if (copy_to_user(argp, &tun->fprog, sizeof(tun->fprog))) + break; + ret = 0; + break; + + default: + ret = -EINVAL; + break; + } + +unlock: + rtnl_unlock(); + if (tun) + tun_put(tun); + return ret; +} + +static long tun_chr_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + return __tun_chr_ioctl(file, cmd, arg, sizeof (struct ifreq)); +} + +#ifdef CONFIG_COMPAT +static long tun_chr_compat_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case TUNSETIFF: + case TUNGETIFF: + case TUNSETTXFILTER: + case TUNGETSNDBUF: + case TUNSETSNDBUF: + case SIOCGIFHWADDR: + case SIOCSIFHWADDR: + arg = (unsigned long)compat_ptr(arg); + break; + default: + arg = (compat_ulong_t)arg; + break; + } + + /* + * compat_ifreq is shorter than ifreq, so we must not access beyond + * the end of that structure. All fields that are used in this + * driver are compatible though, we don't need to convert the + * contents. + */ + return __tun_chr_ioctl(file, cmd, arg, sizeof(struct compat_ifreq)); +} +#endif /* CONFIG_COMPAT */ + +static int tun_chr_fasync(int fd, struct file *file, int on) +{ + struct tun_file *tfile = file->private_data; + int ret; + + if ((ret = fasync_helper(fd, file, on, &tfile->fasync)) < 0) + goto out; + + if (on) { + ret = __f_setown(file, task_pid(current), PIDTYPE_PID, 0); + if (ret) + goto out; + tfile->flags |= TUN_FASYNC; + } else + tfile->flags &= ~TUN_FASYNC; + ret = 0; +out: + return ret; +} + +static int tun_chr_open(struct inode *inode, struct file * file) +{ + struct tun_file *tfile; + + DBG1(KERN_INFO, "tunX: tun_chr_open\n"); + + tfile = (struct tun_file *)sk_alloc(&init_net, AF_UNSPEC, GFP_KERNEL, + &tun_proto); + if (!tfile) + return -ENOMEM; + RCU_INIT_POINTER(tfile->tun, NULL); + tfile->net = get_net(current->nsproxy->net_ns); + tfile->flags = 0; + tfile->ifindex = 0; + + init_waitqueue_head(&tfile->wq.wait); + RCU_INIT_POINTER(tfile->socket.wq, &tfile->wq); + + tfile->socket.file = file; + tfile->socket.ops = &tun_socket_ops; + + sock_init_data(&tfile->socket, &tfile->sk); + sk_change_net(&tfile->sk, tfile->net); + + tfile->sk.sk_write_space = tun_sock_write_space; + tfile->sk.sk_sndbuf = INT_MAX; + + file->private_data = tfile; + set_bit(SOCK_EXTERNALLY_ALLOCATED, &tfile->socket.flags); + INIT_LIST_HEAD(&tfile->next); + + sock_set_flag(&tfile->sk, SOCK_ZEROCOPY); + + return 0; +} + +static int tun_chr_close(struct inode *inode, struct file *file) +{ + struct tun_file *tfile = file->private_data; + struct net *net = tfile->net; + + tun_detach(tfile, true); + put_net(net); + + return 0; +} + +#ifdef CONFIG_PROC_FS +static int tun_chr_show_fdinfo(struct seq_file *m, struct file *f) +{ + struct tun_struct *tun; + struct ifreq ifr; + + memset(&ifr, 0, sizeof(ifr)); + + rtnl_lock(); + tun = tun_get(f); + if (tun) + tun_get_iff(current->nsproxy->net_ns, tun, &ifr); + rtnl_unlock(); + + if (tun) + tun_put(tun); + + return seq_printf(m, "iff:\t%s\n", ifr.ifr_name); +} +#endif + +static const struct file_operations tun_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = do_sync_read, + .aio_read = tun_chr_aio_read, + .write = do_sync_write, + .aio_write = tun_chr_aio_write, + .poll = tun_chr_poll, + .unlocked_ioctl = tun_chr_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = tun_chr_compat_ioctl, +#endif + .open = tun_chr_open, + .release = tun_chr_close, + .fasync = tun_chr_fasync, +#ifdef CONFIG_PROC_FS + .show_fdinfo = tun_chr_show_fdinfo, +#endif +}; + +static struct miscdevice tun_miscdev = { + .minor = (TUN_MINOR1), + .name = "bf_tun", + .nodename = "net/bf_tun", + .fops = &tun_fops, +}; + +/* ethtool interface */ + +static int tun_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + cmd->supported = 0; + cmd->advertising = 0; + ethtool_cmd_speed_set(cmd, SPEED_10); + cmd->duplex = DUPLEX_FULL; + cmd->port = PORT_TP; + cmd->phy_address = 0; + cmd->transceiver = XCVR_INTERNAL; + cmd->autoneg = AUTONEG_DISABLE; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +static void tun_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct tun_struct *tun = netdev_priv(dev); + + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + + switch (tun->flags & TUN_TYPE_MASK) { + case TUN_TUN_DEV: + strlcpy(info->bus_info, "bf_tun", sizeof(info->bus_info)); + break; + case TUN_TAP_DEV: + strlcpy(info->bus_info, "tap", sizeof(info->bus_info)); + break; + } +} + +static u32 tun_get_msglevel(struct net_device *dev) +{ +#ifdef TUN_DEBUG + struct tun_struct *tun = netdev_priv(dev); + return tun->debug; +#else + return -EOPNOTSUPP; +#endif +} + +static void tun_set_msglevel(struct net_device *dev, u32 value) +{ +#ifdef TUN_DEBUG + struct tun_struct *tun = netdev_priv(dev); + tun->debug = value; +#endif +} + +static const struct ethtool_ops tun_ethtool_ops = { + .get_settings = tun_get_settings, + .get_drvinfo = tun_get_drvinfo, + .get_msglevel = tun_get_msglevel, + .set_msglevel = tun_set_msglevel, + .get_link = ethtool_op_get_link, + .get_ts_info = ethtool_op_get_ts_info, +}; + + +static int __init tun_init(void) +{ + int ret = 0; + + pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION); + pr_info("%s\n", DRV_COPYRIGHT); + + ret = rtnl_link_register(&tun_link_ops); + if (ret) { + pr_err("Can't register link_ops\n"); + goto err_linkops; + } + + ret = misc_register(&tun_miscdev); + if (ret) { + pr_err("Can't register misc device %d\n", (TUN_MINOR1)); + goto err_misc; + } + return 0; +err_misc: + rtnl_link_unregister(&tun_link_ops); +err_linkops: + return ret; +} + +static void tun_cleanup(void) +{ + misc_deregister(&tun_miscdev); + rtnl_link_unregister(&tun_link_ops); +} + +/* Get an underlying socket object from tun file. Returns error unless file is + * attached to a device. The returned object works like a packet socket, it + * can be used for sock_sendmsg/sock_recvmsg. The caller is responsible for + * holding a reference to the file for as long as the socket is in use. */ +struct socket *bf_tun_get_socket(struct file *file) +{ + struct tun_file *tfile; + if (file->f_op != &tun_fops) + return ERR_PTR(-EINVAL); + tfile = file->private_data; + if (!tfile) + return ERR_PTR(-EBADFD); + return &tfile->socket; +} +EXPORT_SYMBOL_GPL(bf_tun_get_socket); + +module_init(tun_init); +module_exit(tun_cleanup); +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR(DRV_COPYRIGHT); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(TUN_MINOR1); +MODULE_ALIAS("devname:net/bf_tun"); diff --git a/platform/barefoot/sonic-platform-modules-bfn/scripts/eeprom b/platform/barefoot/sonic-platform-modules-bfn/scripts/eeprom new file mode 100755 index 000000000000..07d98556cbbf --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/scripts/eeprom @@ -0,0 +1,10 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd eeprom "$@" diff --git a/platform/barefoot/sonic-platform-modules-bfn/scripts/fancontrol b/platform/barefoot/sonic-platform-modules-bfn/scripts/fancontrol new file mode 100755 index 000000000000..515fcbdd69da --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/scripts/fancontrol @@ -0,0 +1,11 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd fancontrol "$@" + diff --git a/platform/barefoot/sonic-platform-modules-bfn/scripts/ps_info b/platform/barefoot/sonic-platform-modules-bfn/scripts/ps_info new file mode 100755 index 000000000000..38c9d3330414 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/scripts/ps_info @@ -0,0 +1,10 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd ps_info "$@" diff --git a/platform/barefoot/sonic-platform-modules-bfn/scripts/sensors b/platform/barefoot/sonic-platform-modules-bfn/scripts/sensors new file mode 100755 index 000000000000..07af6955321e --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/scripts/sensors @@ -0,0 +1,12 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd sensors "$@" + + diff --git a/platform/barefoot/sonic-platform-modules-bfn/scripts/sfputil b/platform/barefoot/sonic-platform-modules-bfn/scripts/sfputil new file mode 100755 index 000000000000..3df67614e499 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/scripts/sfputil @@ -0,0 +1,10 @@ +#!/bin/bash + +DOCKER_EXEC_FLAGS="i" + +# Determine whether stdout is on a terminal +if [ -t 1 ] ; then + DOCKER_EXEC_FLAGS+="t" +fi + +docker exec -$DOCKER_EXEC_FLAGS syncd sfputil "$@" diff --git a/platform/barefoot/sonic-platform-modules-bfn/scripts/test b/platform/barefoot/sonic-platform-modules-bfn/scripts/test new file mode 100755 index 000000000000..38327722c91f --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-bfn/scripts/test @@ -0,0 +1 @@ +echo "test" diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/.gitignore b/platform/barefoot/sonic-platform-modules-ingrasys/.gitignore new file mode 100644 index 000000000000..c6127b38c1aa --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/.gitignore @@ -0,0 +1,52 @@ +# Prerequisites +*.d + +# Object files +*.o +*.ko +*.obj +*.elf + +# Linker output +*.ilk +*.map +*.exp + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su +*.idb +*.pdb + +# Kernel Module Compile Results +*.mod* +*.cmd +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/LICENSE b/platform/barefoot/sonic-platform-modules-ingrasys/LICENSE new file mode 100644 index 000000000000..9cecc1d4669e --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/LICENSE @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + {one line to give the program's name and a brief idea of what it does.} + Copyright (C) {year} {name of author} + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + {project} Copyright (C) {year} {fullname} + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/changelog b/platform/barefoot/sonic-platform-modules-ingrasys/debian/changelog new file mode 100644 index 000000000000..f5c70c166031 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/changelog @@ -0,0 +1,17 @@ +platform-driver (1.1.0) unstable; urgency=low + + * Add support for s9180-32x + + -- developer Fri, 26 May 2017 11:00:00 +0800 + +platform-driver (1.1.0) unstable; urgency=low + + * Add support for s8900 series + + -- developer Wed, 29 Mar 2017 11:00:00 +0800 + +platform-driver (1.0.0) unstable; urgency=low + + * Initial release (Closes: #nnnn) + + -- developer Wed, 05 Oct 2016 16:30:45 +0800 diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/compat b/platform/barefoot/sonic-platform-modules-ingrasys/debian/compat new file mode 100644 index 000000000000..ec635144f600 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/compat @@ -0,0 +1 @@ +9 diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/control b/platform/barefoot/sonic-platform-modules-ingrasys/debian/control new file mode 100644 index 000000000000..ec2c1f20c0f7 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/control @@ -0,0 +1,10 @@ +Source: platform-driver +Section: unknown +Priority: optional +Maintainer: Wade He +Build-Depends: debhelper (>= 9), dh-systemd +Standards-Version: 1.0.0 + +Package: sonic-platform-ingrasys-s9180-32x +Architecture: amd64 +Description: This package contains S9180-32X platform driver utility for SONiC project. diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/rules b/platform/barefoot/sonic-platform-modules-ingrasys/debian/rules new file mode 100755 index 000000000000..3ac0d3de6049 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/rules @@ -0,0 +1,81 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +export INSTALL_MOD_DIR:=extra + +PACKAGE_PRE_NAME := sonic-platform-ingrasys +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MOD_SRC_DIR:= $(shell pwd) +MODULE_DIRS:= s9180-32x +MODULE_DIR := modules +UTILS_DIR := utils +SERVICE_DIR := service +CONF_DIR := conf + +%: + dh $@ --with systemd + +clean: + dh_testdir + dh_testroot + dh_clean + +build: + #make modules -C $(KERNEL_SRC)/build M=$(MODULE_SRC) + (for mod in $(MODULE_DIRS); do \ + make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ + done) + +binary: binary-arch binary-indep + # Nothing to do + +binary-arch: + # Nothing to do + +#install: build + #dh_testdir + #dh_testroot + #dh_clean -k + #dh_installdirs + +binary-indep: + dh_testdir + dh_installdirs + + # Custom package commands + (for mod in $(MODULE_DIRS); do \ + mkdir debian/tmp/usr/sbin -p; \ + mkdir debian/tmp/lib/systemd/system -p; \ + mkdir debian/tmp/etc/init.d -p; \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/*.sh debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/sbin/; \ + cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/bfn debian/$(PACKAGE_PRE_NAME)-$${mod}/etc/init\.d/; \ + cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system/; \ + done) + # Resuming debhelper scripts + dh_testroot + dh_install + dh_installchangelogs + dh_installdocs + dh_systemd_enable + dh_installinit + dh_systemd_start + dh_link + dh_fixperms + dh_compress + dh_strip + dh_installdeb + dh_gencontrol + dh_md5sums + dh_builddeb +.PHONY: build binary binary-arch binary-indep clean diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.dirs b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.dirs new file mode 100644 index 000000000000..401d79eb79b8 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.dirs @@ -0,0 +1,4 @@ +usr/sbin +lib/systemd/system +etc/ +etc/init.d/ \ No newline at end of file diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.install b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.install new file mode 100644 index 000000000000..99bda5d123ae --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.install @@ -0,0 +1,4 @@ +lib/systemd/ +usr/sbin/ +etc/ +etc/init.d/ diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postinst b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postinst new file mode 100644 index 000000000000..38e5cac148c4 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postinst @@ -0,0 +1,57 @@ +# Automatically added by dh_systemd_enable +# This will only remove masks created by d-s-h on package removal. +deb-systemd-helper unmask s9180-32x-monitor.service >/dev/null || true +deb-systemd-helper unmask bfn.service >/dev/null || true +deb-systemd-helper unmask qsfp-monitor.service >/dev/null || true +# Generate kernel modules.dep and map files for add eeprom_mb. +depmod -a || true +# was-enabled defaults to true, so new installations run enable. +if deb-systemd-helper --quiet was-enabled s9180-32x-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable s9180-32x-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state s9180-32x-monitor.service >/dev/null || true +fi +if deb-systemd-helper --quiet was-enabled bfn.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable bfn.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state bfn.service >/dev/null || true +fi +if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable qsfp-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s9180-32x-monitor" ]; then + update-rc.d s9180-32x-monitor defaults >/dev/null + invoke-rc.d s9180-32x-monitor start || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + update-rc.d qsfp-monitor defaults >/dev/null + invoke-rc.d qsfp-monitor start || exit $? +fi +if [ -x "/etc/init.d/bfn" ]; then + invoke-rc.d bfn start || exit $? +fi +# End automatically added section +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + deb-systemd-invoke start s9180-32x-monitor.service >/dev/null || true + deb-systemd-invoke start qsfp-monitor.service >/dev/null || true + deb-systemd-invoke start bfn.service >/dev/null || true +fi +# End automatically added section diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postrm b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postrm new file mode 100644 index 000000000000..19c6bcb2945f --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postrm @@ -0,0 +1,42 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + fi +# End automatically added section +# Automatically added by dh_installinit +if [ "$1" = "purge" ] ; then + update-rc.d s9180-32x-monitor remove >/dev/null + update-rc.d bfn remove >/dev/null + update-rc.d qsfp-monitor remove >/dev/null +fi + + +# In case this system is running systemd, we make systemd reload the unit files +# to pick up changes. +if [ -d /run/systemd/system ] ; then + systemctl --system daemon-reload >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_systemd_enable +if [ "$1" = "remove" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper mask s9180-32x-monitor.service >/dev/null + deb-systemd-helper mask bfn.service >/dev/null + deb-systemd-helper mask qsfp-monitor.service >/dev/null + fi +fi + +if [ "$1" = "purge" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper purge s9180-32x-monitor.service >/dev/null + deb-systemd-helper unmask s9180-32x-monitor.service >/dev/null + deb-systemd-helper purge bfn.service >/dev/null + deb-systemd-helper unmask bfn.service >/dev/null + deb-systemd-helper purge qsfp-monitor.service >/dev/null + deb-systemd-helper unmask qsfp-monitor.service >/dev/null + fi +fi +# Generate kernel modules.dep and map files for remove eeprom_mb. +depmod -a || true +# End automatically added section + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.prerm b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.prerm new file mode 100644 index 000000000000..76533bfe6889 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.prerm @@ -0,0 +1,21 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + deb-systemd-invoke stop s9180-32x-monitor.service >/dev/null + deb-systemd-invoke stop bfn.service >/dev/null + deb-systemd-invoke stop qsfp-monitor.service >/dev/null +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s9180-32x-monitor" ]; then + invoke-rc.d s9180-32x-monitor stop || exit $? +fi +if [ -x "/etc/init.d/bfn" ]; then + invoke-rc.d bfn stop || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + invoke-rc.d qsfp-monitor stop || exit $? +fi +# Driver deinit +/usr/sbin/i2c_utils.sh i2c_deinit +# End automatically added section + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.upstart b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.upstart new file mode 100644 index 000000000000..2c8d2ebec6d7 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.upstart @@ -0,0 +1,7 @@ +description "SONiC platform service" + +respawn + +exec /usr/sbin/s9180_32x_monitor.sh +exec /usr/sbin/qsfp_monitor.sh +exec /etc/init.d/bfn start diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/README.md b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/README.md new file mode 100644 index 000000000000..fa3760ab9ab7 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/README.md @@ -0,0 +1,185 @@ +# Ingrasys S9180-32X Platform Driver for SONiC + +Copyright (C) 2016 Ingrasys, Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + +## Licensing terms + +The Licensing terms of the files within this project is split 2 parts. +The Linux kernel is released under the GNU General Public License version 2. +All other code is released under the GNU General Public License version 3. +Please see the LICENSE file for copies of both licenses. + +## Contents of this package + + - service/ + > Service config files for platform initialization and monitoring + - utils/ + > Scripts useful during platform bringup and sysfs function + - conf/ + > Platform configure files. + +## Kernel modules and drivers + +The driver for interacting with Ingrasys S9180-32X is contained in the I2C +kernel module and initialization script. The initialization script loads +the modules in the correct order. It has been built and tested against +the Linux 3.16 kernel. + +The initialization script will modprobe the needed modules, navigate to the +module's device directory in sysfs, and write configuration data to +the kernel module. + +### IGB + +This is OOB Ports on front panel for management plane. + +The IGB module must be loaded first on Ingrasys S9180-32X platform. + +### I2C i801 + +The I2C i801 on Ingrasys S9180-32X can be found in +`/sys/bus/i2c/devices/i2c-0/` + +This is I2C bus for Clock Gen, DIMM channel and digital potentiometers. + +The i801 module must be loaded second on Ingrasys S9180-32X. + +### I2C iSMT + +The I2C iSMT module on S9180-32X can be found in +`/sys/bus/i2c/devices/i2c-1/` + +This is I2C bus for CPLD, HWM, power controller and I2C Switches. + +The i801 module must be loaded third on Ingrasys S9180-32X. + +### I2C PCA9548 +The PCA9548 module on S9180-32X can be found in +`/sys/bus/i2c/devices/i2c-2/` , `/sys/bus/i2c/devices/i2c-3/`, +`/sys/bus/i2c/devices/i2c-4/`, `/sys/bus/i2c/devices/i2c-5/`, +`/sys/bus/i2c/devices/i2c-6/`, `/sys/bus/i2c/devices/i2c-7/`, +`/sys/bus/i2c/devices/i2c-8/`, `/sys/bus/i2c/devices/i2c-9/`. + +The pca9548 module for zQSFP module get/set functions, PSU information, +fan status and EEPROM. + +## Hardware components + +The hardware components are initialized in the init script on S9180-32X. +The following describes manual initialization as well as interaction. +The examples below are just for Ingrasys S9180-32X platform. + +### Hardware initialization + +When the sonic-platform-ingrasys-s9180 package is installed on the S9180-32X, +it is automatically initialized. If you want to manual initialization, the +utility command usage as follows: +``` + i2c_utils.sh i2c_init +``` + +### EEPROM + +The EEPROM is including the board SKU, model name, vendor name, serial number, +and other information can be accessed with the specific eeprom kernel module. +After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs. + +The hexdump utility can be used to decode the raw output of the EEPROM. +For example, +``` + bash# echo "mb_eeprom 0x54" > /sys/bus/i2c/devices/i2c-9/new_device + bash# cat /sys/bus/i2c/drivers/mb_eeprom/9-0054/eeprom | hexdump -C +``` + +### Front panel LEDs + +LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`. +Utility function command usage as follows: + +``` +Status LED: + i2c_utils.sh i2c_sys_led green|amber on|off + +Fan status LED: + i2c_utils.sh i2c_fan_led green|amber on|off + +PSU1 status LED: + i2c_utils.sh i2c_psu1_led green|amber on|off + +PSU2 status LED: + i2c_utils.sh i2c_psu2_led green|amber on|off + +``` +QSFP Module Port LEDs control by ASIC library. + + +### Fan speed + +Fan speed are controlled by the w83795 kernel module. +It can be found in `/sys/class/hwmon/hwmon3/device/`. +If they were compiled as modules, you will need to modprobe w83795 for +their sysfs entries to show up. Each fan has an `fan_input` file +for reading the fan speed. And `pwm1` setting fan1 to fan4, +`pwm2` setting fan5 to fan8. + +There is docker-platform-monitor container installed fancontrol package that can +automatic control platform fan speed. + + +### Temperature sensors + +Temperature sensors are controlled by the w83795 kernel +module. It can be found in `/sys/class/hwmon/hwmon3/device/`. +If they were compiled as modules, then you will need to modprobe w83795 for +their sysfs entries to show up. +`temp1_input` is front MAC temperature sensor. `temp2_input` is rear MAC +temperature sensor. + +There is docker-platform-monitor container installed lm-sensors package that can +monitor platform temperature. And `sensors` command can show each +temperature sensors status. + +### Power supplies + +Power supplies status and its EEPROM info can be used i2c utility +`/usr/sbin/i2c_utils.sh` to get. +The usage as follows: +``` +PSU EEPROM: + i2c_utils.sh i2c_psu_eeprom_get + hexdump -C psu0.rom + hexdump -C psu1.rom + +PSU Status: + i2c_utils.sh i2c_psu_status +``` + +### QSFPs +QSFP modules are managed by the pca9548 kernel driver. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +QSFP EEPROM: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + +QSFP Insert Event: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + 0 => not insert + 1 => inserted +``` + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/Makefile b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/Makefile new file mode 100644 index 000000000000..3edb8690475e --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/Makefile @@ -0,0 +1 @@ +obj-m := eeprom_mb.o diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/eeprom_mb.c b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/eeprom_mb.c new file mode 100644 index 000000000000..61f0caf96130 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/eeprom_mb.c @@ -0,0 +1,211 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 256 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void mb_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, ((u8)addr >> 8) & 0xFF, (u8)addr & 0xFF); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t mb_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + mb_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static struct bin_attribute mb_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = EEPROM_SIZE, + .read = mb_eeprom_read, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int mb_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x50. So decline + attaching to addresses >= 0x51 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51) { + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + return -ENODEV; + } + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int mb_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &mb_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int mb_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &mb_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id mb_eeprom_id[] = { + { "mb_eeprom", 0 }, + { } +}; + +static struct i2c_driver mb_eeprom_driver = { + .driver = { + .name = "mb_eeprom", + }, + .probe = mb_eeprom_probe, + .remove = mb_eeprom_remove, + .id_table = mb_eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = mb_eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(mb_eeprom_driver); + +MODULE_AUTHOR("Wade "); +MODULE_DESCRIPTION("Ingrasys Mother Borad EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/bfn.service b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/bfn.service new file mode 100644 index 000000000000..6c8c2fb71517 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/bfn.service @@ -0,0 +1,13 @@ +[Unit] +Description=Barefoot Kernel Module +After=local-fs.target +Before=docker.service + +[Service] +Type=oneshot +ExecStart=-/etc/init.d/bfn start +ExecStop=-/etc/init.d/bfn stop +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/qsfp-monitor.service b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/qsfp-monitor.service new file mode 100644 index 000000000000..fde9dcf9f50a --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/qsfp-monitor.service @@ -0,0 +1,15 @@ +[Unit] +Description= This QSFP Monitor service is to setup QSFP SI. +Requires=s9180-32x-monitor.service +After=s9180-32x-monitor.service + +[Service] +ExecStart=/usr/sbin/qsfp_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/s9180-32x-monitor.service b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/s9180-32x-monitor.service new file mode 100644 index 000000000000..884284b241ad --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/s9180-32x-monitor.service @@ -0,0 +1,19 @@ +[Unit] +Description= This Platform Monitor service is to initialize platform and monitor platform. +Before=platform-monitor.service +After=sysinit.target +Wants=fancontrol.service +Wants=qsfp-monitor.service +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/sbin/i2c_utils.sh i2c_init +ExecStart=/usr/sbin/s9180_32x_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/bfn b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/bfn new file mode 100755 index 000000000000..c52b1fab4ea1 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/bfn @@ -0,0 +1,44 @@ +#!/bin/bash +# This script load/unload Barefoot kernel modules + +### BEGIN INIT INFO +# Provides: +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Load Barefoot kernel modules +### END INIT INFO + +case "$1" in +start) + echo -n "Load Barefoot kernel modules... " + + modprobe bf_kdrv + modprobe bf_tun + + echo "done." + ;; + +stop) + echo -n "Unload Barefoot kernel modules... " + + rmmod bf_tun + rmmod bf_kdrv + + echo "done." + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/bfn {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh new file mode 100755 index 000000000000..e765ed1da6a9 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh @@ -0,0 +1,1423 @@ +#!/bin/bash + +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +EXEC_FUNC=${1} +QSFP_PORT=${2} +QSFP_ACTION=${2} +MB_EEPROM_ACTION=${2} +COLOR_PORT_LED=${3} +ONOFF_LED=${3} +COLOR_SYS_LED=${2} +BLINK_LED=${4} +FAN_TRAY=${4} + +############################################################ +# Distributor ID: Debian +# Description: Debian GNU/Linux 8.6 (jessie) +# Release: 8.6 +# Codename: jessie +# Linux debian 3.16.0-4-amd64 #1 +# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux +############################################################ + +# Color Definition +COLOR_TITLE="\e[1;32m" ### Green ### +COLOR_WARNING="\e[1;33m" ### Yellow ### +COLOR_ERROR="\e[1;31m" ### Red ### +COLOR_END="\e[0m" ### END ### + +NUM_I801_DEVICE=0 # Main I2C +NUM_MUX1_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 1 )) # zQSFP I/O 0-7 +NUM_MUX1_CHAN1_DEVICE=$(( ${NUM_MUX1_CHAN0_DEVICE} + 1 )) # zQSFP I/O 8-15 +NUM_MUX1_CHAN2_DEVICE=$(( ${NUM_MUX1_CHAN1_DEVICE} + 1 )) # zQSFP I/O 16-23 +NUM_MUX1_CHAN3_DEVICE=$(( ${NUM_MUX1_CHAN2_DEVICE} + 1 )) # zQSFP I/O 24-31 +NUM_MUX1_CHAN4_DEVICE=$(( ${NUM_MUX1_CHAN3_DEVICE} + 1 )) # zQSFP I/O ABS#, INT +NUM_MUX1_CHAN5_DEVICE=$(( ${NUM_MUX1_CHAN4_DEVICE} + 1 )) # zQSFP I/O LPMODE, RST, MODSEL +NUM_MUX1_CHAN6_DEVICE=$(( ${NUM_MUX1_CHAN5_DEVICE} + 1 )) # MAC CLK CPLD +NUM_MUX1_CHAN7_DEVICE=$(( ${NUM_MUX1_CHAN6_DEVICE} + 1 )) # P1V0 PWR +NUM_MUX3_CHAN0_DEVICE=$(( ${NUM_MUX1_CHAN7_DEVICE} + 1 )) # zQSFP I/O 0-7 +NUM_MUX4_CHAN0_DEVICE=$(( ${NUM_MUX3_CHAN0_DEVICE} + 8 )) # zQSFP I/O 8-15 +NUM_MUX5_CHAN0_DEVICE=$(( ${NUM_MUX4_CHAN0_DEVICE} + 8 )) # zQSFP I/O 16-23 +NUM_MUX6_CHAN0_DEVICE=$(( ${NUM_MUX5_CHAN0_DEVICE} + 8 )) # zQSFP I/O 24-31 +NUM_MUX7_CHAN0_DEVICE=$(( ${NUM_MUX6_CHAN0_DEVICE} + 8 )) # Temp Sensor 0x48-0x4D +NUM_MAIN_MUX_CHAN0_DEVICE=$(( ${NUM_MUX7_CHAN0_DEVICE} + 8 )) # System LED HWMON +NUM_MAIN_MUX_CHAN1_DEVICE=$(( ${NUM_MAIN_MUX_CHAN0_DEVICE} + 1 )) # System LED +NUM_MAIN_MUX_CHAN2_DEVICE=$(( ${NUM_MAIN_MUX_CHAN0_DEVICE} + 2 )) # Board ID +NUM_MAIN_MUX_CHAN3_DEVICE=$(( ${NUM_MAIN_MUX_CHAN0_DEVICE} + 3 )) # MAX_Slave +NUM_MAIN_MUX_CHAN4_DEVICE=$(( ${NUM_MAIN_MUX_CHAN0_DEVICE} + 4 )) # TEMP Sensor +NUM_MAIN_MUX_CHAN5_DEVICE=$(( ${NUM_MAIN_MUX_CHAN0_DEVICE} + 5 )) # CLK GEN +NUM_MAIN_MUX_CHAN6_DEVICE=$(( ${NUM_MAIN_MUX_CHAN0_DEVICE} + 6 )) # VDD CORE +NUM_MAIN_MUX_CHAN7_DEVICE=$(( ${NUM_MAIN_MUX_CHAN0_DEVICE} + 7 )) # HWMON +NUM_FRU_MUX_CHAN0_DEVICE=$(( ${NUM_MAIN_MUX_CHAN0_DEVICE} + 8 )) # PSU2 +NUM_FRU_MUX_CHAN1_DEVICE=$(( ${NUM_FRU_MUX_CHAN0_DEVICE} + 1 )) # PSU1 +NUM_FRU_MUX_CHAN2_DEVICE=$(( ${NUM_FRU_MUX_CHAN0_DEVICE} + 2 )) # FAN +NUM_CPLD_DEVICE=$(( ${NUM_MUX7_CHAN0_DEVICE} + 3 )) # CPLD +NUM_SFP1_DEVICE=$(( ${NUM_MUX7_CHAN0_DEVICE} + 4 )) # CPLD +NUM_SFP2_DEVICE=$(( ${NUM_MUX7_CHAN0_DEVICE} + 5 )) # CPLD + +PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" +PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon1" +PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_ISMT_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_ISMT_DEVICE}" +PATH_MUX_CHAN0_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN0_DEVICE}" +PATH_MUX_CHAN1_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN1_DEVICE}" +PATH_MUX_CHAN2_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN2_DEVICE}" +PATH_MUX_CHAN3_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN3_DEVICE}" +PATH_MUX_CHAN4_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN4_DEVICE}" +PATH_MUX_CHAN5_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN5_DEVICE}" +PATH_MUX_CHAN6_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN6_DEVICE}" +PATH_MUX_CHAN7_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN7_DEVICE}" +PATH_MUX7_CHAN0_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX7_CHAN0_DEVICE}" +PATH_MAIN_MUX_CHAN0_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MAIN_MUX_CHAN0_DEVICE}" + +#Power Supply Status +PSU_DC_ON=1 +PSU_DC_OFF=0 +PSU_EXIST=1 +PSU_NOT_EXIST=0 + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} i2c_init" + echo " : ${0} i2c_deinit" + echo " : ${0} i2c_temp_init" + echo " : ${0} i2c_fan_init" + echo " : ${0} i2c_volmon_init" + echo " : ${0} i2c_io_exp_init" + echo " : ${0} i2c_gpio_init" + echo " : ${0} i2c_gpio_deinit" + + echo " : ${0} i2c_psu_eeprom_get" + echo " : ${0} i2c_mb_eeprom_get" + echo " : ${0} i2c_cpu_eeprom_get" + echo " : ${0} i2c_qsfp_eeprom_get [1-34]" + echo " : ${0} i2c_qsfp_eeprom_init new|delete" + echo " : ${0} i2c_sfp_eeprom_init new|delete" + echo " : ${0} i2c_mb_eeprom_init new|delete" + echo " : ${0} i2c_psu_eeprom_init new|delete" + echo " : ${0} i2c_qsfp_status_get [1-34]" + echo " : ${0} i2c_qsfp_type_get [1-34]" + echo " : ${0} i2c_board_type_get" + echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_fan_status_set" + echo " : ${0} i2c_led_fan_tray_status_set" + echo " : ${0} i2c_cpld_version" + echo " : ${0} i2c_port_led_set [1-34] green|yellow|off blink|noblink" + echo " : ${0} i2c_test_all" + echo " : ${0} i2c_sys_led green|amber" + echo " : ${0} i2c_fan_led green|amber on|off" + echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]" + echo "----------------------------------------------------" +} + +#Pause function +function _pause { + read -p "$*" +} + +#Retry command function +function _retry { + local i + for i in {1..5}; + do + eval "${*}" && break || echo "retry"; sleep 1; + done +} + +#I2C Init +function _i2c_init { + echo "=========================================================" + echo "# Description: I2C Init" + echo "=========================================================" + + rmmod eeprom + rmmod i2c_i801 + modprobe i2c_i801 + modprobe i2c_dev + modprobe i2c_mux_pca954x force_deselect_on_exit=1 + + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x70' > ${PATH_I801_DEVICE}/new_device" + else + echo "${PATH_I801_DEVICE} 0x70 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX3_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN0_DEVICE}/new_device" + else + echo "${PATH_MUX_CHAN0_DEVICE} 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX4_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN1_DEVICE}/new_device" + else + echo "${PATH_MUX_CHAN1_DEVICE} 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX5_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN2_DEVICE}/new_device" + else + echo "${PATH_MUX_CHAN2_DEVICE} 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX6_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN3_DEVICE}/new_device" + else + echo "${PATH_MUX_CHAN3_DEVICE} 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX7_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN6_DEVICE}/new_device" + else + echo "${PATH_MUX_CHAN6_DEVICE} 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MAIN_MUX_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x76' > ${PATH_I801_DEVICE}/new_device" + else + echo "${PATH_MAIN_MUX_CHAN0_DEVICE} 0x76 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_FRU_MUX_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9545 0x72' > ${PATH_I801_DEVICE}/new_device" + else + echo "${PATH_MAIN_MUX_CHAN0_DEVICE} 0x72 already init." + fi + + rmmod coretemp + rmmod jc42 + rmmod w83795 + rmmod lm75 + rmmod lm90 + rmmod eeprom + modprobe coretemp + modprobe w83795 + modprobe lm75 + modprobe lm90 + modprobe eeprom_mb + modprobe gpio-pca953x + _i2c_io_exp_init + _i2c_fan_init + _i2c_volmon_init + _i2c_fan_speed_init + _i2c_temp_init + modprobe jc42 + _i2c_gpio_init + _i2c_mb_eeprom_init "new" + _i2c_qsfp_eeprom_init "new" + _i2c_sfp_eeprom_init "new" + _i2c_psu_eeprom_init "new" + _i2c_led_fan_status_set + _i2c_led_fan_tray_status_set + + #SYS LED set green + COLOR_SYS_LED="green" + _i2c_sys_led +} + +#I2C Deinit +function _i2c_deinit { + _i2c_gpio_deinit + for mod in coretemp jc42 w83795 lm75 lm90 eeprom eeprom_mb gpio-pca953x i2c_mux_pca954x i2c_ismt i2c_i801; + do + [ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod + done +} + +#FAN Init +function _i2c_fan_speed_init { + echo -n "FAN INIT..." + if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm1 + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm2 + echo "SUCCESS" + else + echo "FAIL" + fi + +} + +#VOLMON Init +function _i2c_volmon_init { + echo "VOLMON INIT..." + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x00 0x80 + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x01 0x1C + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x00 0x80 + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x02 0xFF + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x03 0x50 + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x04 0x0A + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x00 0x80 + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x01 0x1D + + # add w83795 to sysfs + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MAIN_MUX_CHAN7_DEVICE}-0x2f" + if ! [ -L ${dev_path} ]; then + echo "w83795adg 0x2f" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MAIN_MUX_CHAN7_DEVICE}/new_device #hwmon + else + echo "${dev_path} already exist" + fi + echo "Done" +} + +#IO Expander Init +function _i2c_io_exp_init { + echo "=========================================================" + echo "# Description: I2C IO Expender Init" + echo "=========================================================" + + #Golden Finger to active CPLD + i2cget -y ${NUM_CPLD_DEVICE} 0x74 2 + #BMC dummy board reset + echo "BMC dummy board reset" + i2cset -y -r ${NUM_I801_DEVICE} 0x26 4 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x26 5 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x26 2 0x3F + i2cset -y -r ${NUM_I801_DEVICE} 0x26 3 0x1F + i2cset -y -r ${NUM_I801_DEVICE} 0x26 6 0xC0 + i2cset -y -r ${NUM_I801_DEVICE} 0x26 7 0x00 + + #CPU Baord + i2cset -y -r ${NUM_I801_DEVICE} 0x77 6 0xFF + i2cset -y -r ${NUM_I801_DEVICE} 0x77 7 0xFF + + #SMBUS1 + #ABS + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x20 6 0xFF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x20 7 0xFF + + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x21 6 0xFF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x21 7 0xFF + + #Transcevior INT + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 6 0xFF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 7 0xFF + + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 2 0xCF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 3 0xF0 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 6 0xCF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 7 0xF0 + + #SFP+ PRES, TX FAULT, TX DIS, RX LOS, RS, TS + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x27 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x27 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x27 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x27 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x27 6 0xCF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x27 7 0xF0 + + + echo "Init ZQSFP IO Expender" + echo "set ZQSFP LP_MODE = 0" + #set ZQSFP LP_MODE = 0 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 7 0x00 + + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 7 0x00 + + echo "set ZQSFP RST = 1" + #set ZQSFP RST = 1 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 2 0xFF + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 3 0xFF + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 7 0x00 + + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 2 0xFF + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 3 0xFF + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 7 0x00 + + #0.0: TH_RST_L - 0:Reset + #0.1: TH_PCIE_RST_L - 0:Reset + #0.2: LED_CLR - 0: Off, 1:On + #0.3: Host to BMC + #0.4: UART_SEL - 0:Host + #0.5: USB_SEL - 0: Host + #0.[7:6]: TH_CLK_FSEL (00) + #1.0: TH_INT_L + #1.1: QSFP0_INT_L - 0:Interrupt + #1.2: QSFP1_INT_L - 0:Interrupt + #1.3: QSFP2_INT_L - 0:Interrupt + #1.4: QSFP3_INT_L - 0:Interrupt + #1.5: TH_CLK_SEL (0) + #1.6: I210_RST_L - 0:Reset + #1.6: I210_PE_RST_L - 0:Reset + echo "Init HOST GPIO" + i2cset -y -r ${NUM_I801_DEVICE} 0x74 4 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x74 5 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x74 2 0x0F + i2cset -y -r ${NUM_I801_DEVICE} 0x74 3 0xDF + i2cset -y -r ${NUM_I801_DEVICE} 0x74 6 0x08 + i2cset -y -r ${NUM_I801_DEVICE} 0x74 7 0x1F + + + #LED board after PVT (BAREFOOT_IO_EXP_LED_ID) + echo "Init LED IO Expender" + echo "LED_CHANNEL=${NUM_MAIN_MUX_CHAN1_DEVICE}" + i2cset -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 4 0x00 + i2cset -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 5 0x00 + i2cset -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 6 0x00 + i2cset -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 7 0xFF + + #Board ID + echo "Init Board ID" + i2cset -y -r ${NUM_MAIN_MUX_CHAN2_DEVICE} 0x27 4 0x00 + i2cset -y -r ${NUM_MAIN_MUX_CHAN2_DEVICE} 0x27 5 0x00 + i2cset -y -r ${NUM_MAIN_MUX_CHAN2_DEVICE} 0x27 6 0xFF + i2cset -y -r ${NUM_MAIN_MUX_CHAN2_DEVICE} 0x27 7 0xFF + + #Board ID of dummy card + echo "Init Board ID of dummy card" + i2cset -y -r ${NUM_I801_DEVICE} 0x24 4 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x24 5 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x24 6 0xFF + i2cset -y -r ${NUM_I801_DEVICE} 0x24 7 0xFF + + #PSU I/O (BAREFOOT_IO_EXP_PSU_ID) + echo "Init PSU IO Expender" + i2cset -y -r ${NUM_I801_DEVICE} 0x25 4 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x25 5 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x25 2 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x25 3 0x1D + i2cset -y -r ${NUM_I801_DEVICE} 0x25 6 0xDB + i2cset -y -r ${NUM_I801_DEVICE} 0x25 7 0x03 + + #FAN I/O (BAREFOOT_IO_EXP_FAN_ID) + echo "Init FAN IO Expender" + i2cset -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} 0x20 2 0x11 + i2cset -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} 0x20 3 0x11 + i2cset -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} 0x20 6 0xCC + i2cset -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} 0x20 7 0xCC + +} + +#FANIN Init +function _i2c_fan_init { + echo "FANIN INIT..." + # enable fan monitor on w83795 + # 4 fantray with 8 FANIN + # select bank0 + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x00 0x80 + # enable FANIN1~8 + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x06 0xFF + # disable FANIN9~14 + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x07 0x00 + + # select bank 2 + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x00 0x82 + # set PWM mode in FOMC + i2cset -y -r ${NUM_MAIN_MUX_CHAN7_DEVICE} 0x2F 0x0F 0x00 + + echo "Done" +} + +#GPIO Init +function _i2c_gpio_init { + local i=0 + #ABS Port 0-15 + echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device + for i in {240..255}; + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #ABS Port 16-31 + echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device + for i in {224..239}; + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #INT Port 0-15 + echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device + for i in {208..223}; + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #INT Port 16-31 + echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device + for i in {192..207}; + do + echo $i > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio${i}/active_low + done + + #SFP+ + echo "pca9535 0x27" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device + for i in {176..191}; + do + echo $i > /sys/class/gpio/export + case ${i} in + 176|177|178|179|182|183|188|189|190|191) + echo 1 > /sys/class/gpio/gpio${i}/active_low + ;; + 180|181|184|185|186|187) + echo out > /sys/class/gpio/gpio${i}/direction + ;; + esac + + done + #echo 176 > /sys/class/gpio/export + #echo 177 > /sys/class/gpio/export + #echo 178 > /sys/class/gpio/export + #echo 179 > /sys/class/gpio/export + #echo 180 > /sys/class/gpio/export + #echo 181 > /sys/class/gpio/export + #echo 182 > /sys/class/gpio/export + #echo 183 > /sys/class/gpio/export + #echo 184 > /sys/class/gpio/export + #echo 185 > /sys/class/gpio/export + #echo 186 > /sys/class/gpio/export + #echo 187 > /sys/class/gpio/export + #echo 188 > /sys/class/gpio/export + #echo 189 > /sys/class/gpio/export + #echo 190 > /sys/class/gpio/export + #echo 191 > /sys/class/gpio/export + #echo 1 > /sys/class/gpio/gpio176/active_low #SFP+0 ABS + #echo 1 > /sys/class/gpio/gpio177/active_low #SFP+1 ABS + #echo 1 > /sys/class/gpio/gpio178/active_low #SFP+0 TX_FAULT + #echo 1 > /sys/class/gpio/gpio179/active_low #SFP+1 TX_FAULT + #echo out > /sys/class/gpio/gpio180/direction #SFP+0 TX_DIS + #echo out > /sys/class/gpio/gpio181/direction #SFP+1 TX_DIS + #echo 1 > /sys/class/gpio/gpio182/active_low #SFP+0 RX_LOS + #echo 1 > /sys/class/gpio/gpio183/active_low #SFP+1 RX_LOS + #echo out > /sys/class/gpio/gpio184/direction #SFP+0 RS + #echo out > /sys/class/gpio/gpio185/direction #SFP+1 RS + #echo out > /sys/class/gpio/gpio186/direction #SFP+0 TS + #echo out > /sys/class/gpio/gpio187/direction #SFP+1 TS + #echo 1 > /sys/class/gpio/gpio188/active_low #N/A + #echo 1 > /sys/class/gpio/gpio189/active_low #N/A + #echo 1 > /sys/class/gpio/gpio190/active_low #N/A + #echo 1 > /sys/class/gpio/gpio191/active_low #N/A + + #LP Mode Port 0-15 + echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device + for i in {160..175}; + do + echo $i > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio${i}/direction + done + + #LP Mode Port 16-31 + echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device + for i in {144..159}; + do + echo $i > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio${i}/direction + done + + #RST Port 0-15 + echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device + for i in {128..143}; + do + echo $i > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio${i}/direction + echo 1 > /sys/class/gpio/gpio${i}/active_low + echo 0 > /sys/class/gpio/gpio${i}/value + done + + #RST Port 16-31 + echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device + for i in {112..127}; + do + echo $i > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio${i}/direction + echo 1 > /sys/class/gpio/gpio${i}/active_low + echo 0 > /sys/class/gpio/gpio${i}/value + done + + #PSU I/O on Dummy Board 0x25 + echo "pca9535 0x25" > /sys/bus/i2c/devices/i2c-${NUM_I801_DEVICE}/new_device + for i in {96..111}; + do + echo $i > /sys/class/gpio/export + case ${i} in + 97|98|100|101|102|105|106|108) + echo 1 > /sys/class/gpio/gpio${i}/active_low + ;; + 98|101|106|107|108) + echo out > /sys/class/gpio/gpio${i}/direction + ;; + esac + done +} + +#GPIO DeInit +function _i2c_gpio_deinit { + echo "0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device + echo "0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device + echo "0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device + echo "0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device + echo "0x27" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device + echo "0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/delete_device + echo "0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/delete_device + echo "0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/delete_device + echo "0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/delete_device + echo "0x25" > /sys/bus/i2c/devices/i2c-${NUM_I801_DEVICE}/delete_device +} + +#TMP75 Init +function _i2c_temp_init { + echo "lm86 0x4c" > ${PATH_MUX7_CHAN0_DEVICE}/new_device # ASIC Coretemp and Front MAC + echo "tmp75 0x4f" > ${PATH_I801_DEVICE}/new_device #CPU Board + echo "tmp75 0x48" > ${PATH_MUX7_CHAN0_DEVICE}/new_device # Near PSU1 + echo "tmp75 0x4a" > ${PATH_MUX7_CHAN0_DEVICE}/new_device # Rear MAC + echo "tmp75 0x4b" > ${PATH_MUX7_CHAN0_DEVICE}/new_device # Near Port 32 + echo "tmp75 0x4d" > ${PATH_MUX7_CHAN0_DEVICE}/new_device # Near PSU2 +} + +#Set FAN Tray LED +function _i2c_led_fan_tray_status_set { + echo "FAN Tray Status Setup" + #FAN Status get + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + + # check if io expander for fan tray exist + #i2cset -m $mask -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} $i2cAddr $ioPort 0x33 + result=`i2cget -y ${NUM_FRU_MUX_CHAN2_DEVICE} 0x20 0 2>/dev/null` + err_code=$? + if [ "$err_code" != "0" ]; then + echo "fan tray not exist!" + return + fi + + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ]; then + FAN_TRAY=1 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_SYS_LED="green" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_SYS_LED="amber" + ONOFF_LED="off" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=1 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_SYS_LED="green" + ONOFF_LED="off" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_SYS_LED="amber" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ]; then + FAN_TRAY=2 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_SYS_LED="green" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_SYS_LED="amber" + ONOFF_LED="off" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=2 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_SYS_LED="green" + ONOFF_LED="off" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_SYS_LED="amber" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ]; then + FAN_TRAY=3 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_SYS_LED="green" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_SYS_LED="amber" + ONOFF_LED="off" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=3 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_SYS_LED="green" + ONOFF_LED="off" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_SYS_LED="amber" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + FAN_TRAY=4 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_SYS_LED="green" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_SYS_LED="amber" + ONOFF_LED="off" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=4 + echo "FAN_TRAY${FAN_TRAY}..." + COLOR_SYS_LED="green" + ONOFF_LED="off" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_SYS_LED="amber" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi +} + +#Set FAN LED +function _i2c_led_fan_status_set { + echo "FAN Status Setup" + #PSU Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + + echo "led_fan setup..." + # all fan ok + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ] \ + && [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ] \ + && [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ] \ + && [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + COLOR_SYS_LED="green" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_led + # all fan fail + elif [ "${FAN1_ALARM}" == "1" ] && [ "${FAN2_ALARM}" == "1" ] \ + && [ "${FAN3_ALARM}" == "1" ] && [ "${FAN4_ALARM}" == "1" ] \ + && [ "${FAN5_ALARM}" == "1" ] && [ "${FAN6_ALARM}" == "1" ] \ + && [ "${FAN7_ALARM}" == "1" ] && [ "${FAN8_ALARM}" == "1" ]; then + COLOR_SYS_LED="green" + ONOFF_LED="off" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_led + # partial fan fail + else + COLOR_SYS_LED="amber" + ONOFF_LED="on" + echo "${COLOR_SYS_LED} ${ONOFF_LED}" + _i2c_fan_led + fi +} + +#Set QSFP Port variable +function _qsfp_port_i2c_var_set { + local port=$1 + case ${port} in + 1|2|3|4|5|6|7|8) + i2cbus=${NUM_MUX1_CHAN4_DEVICE} + regAddr=0x20 + dataAddr=0 + eeprombusbase=${NUM_MUX3_CHAN0_DEVICE} + gpioBase=240 + ;; + 9|10|11|12|13|14|15|16) + i2cbus=${NUM_MUX1_CHAN4_DEVICE} + regAddr=0x20 + dataAddr=1 + eeprombusbase=${NUM_MUX4_CHAN0_DEVICE} + gpioBase=240 + ;; + 17|18|19|20|21|22|23|24) + i2cbus=${NUM_MUX1_CHAN4_DEVICE} + regAddr=0x21 + dataAddr=0 + eeprombusbase=${NUM_MUX5_CHAN0_DEVICE} + gpioBase=$((224 - 16)) + ;; + 25|26|27|28|29|30|31|32) + i2cbus=${NUM_MUX1_CHAN4_DEVICE} + regAddr=0x21 + dataAddr=1 + eeprombusbase=${NUM_MUX6_CHAN0_DEVICE} + gpioBase=$((224 - 16)) + ;; + 33) + i2cbus=${NUM_MUX1_CHAN7_DEVICE} + regAddr=0x27 + dataAddr=0 + gpioBase=145 + ;; + 34) + i2cbus=${NUM_MUX1_CHAN7_DEVICE} + regAddr=0x27 + dataAddr=1 + gpioBase=143 + ;; + *) + echo "Please input 1~34" + ;; + esac +} + +#Set QSFP Port variable +function _qsfp_eeprom_var_set { + local port=$1 + if [ ${port} -lt 33 ]; then + eeprombusidx=$(( ${port} % 8)) + case $eeprombusidx in + 1) + eeprombus=$(( $eeprombusbase + 1 )) + eepromAddr=0x50 + ;; + 2) + eeprombus=$(( $eeprombusbase + 0 )) + eepromAddr=0x50 + ;; + 3) + eeprombus=$(( $eeprombusbase + 3 )) + eepromAddr=0x50 + ;; + 4) + eeprombus=$(( $eeprombusbase + 2 )) + eepromAddr=0x50 + ;; + 5) + eeprombus=$(( $eeprombusbase + 5 )) + eepromAddr=0x50 + ;; + 6) + eeprombus=$(( $eeprombusbase + 4 )) + eepromAddr=0x50 + ;; + 7) + eeprombus=$(( $eeprombusbase + 7 )) + eepromAddr=0x50 + ;; + 0) + eeprombus=$(( $eeprombusbase + 6 )) + eepromAddr=0x50 + ;; + esac + else + case $port in + 33) + eeprombus=${NUM_SFP1_DEVICE} + eepromAddr=0x50 + ;; + 34) + eeprombus=${NUM_SFP2_DEVICE} + eepromAddr=0x50 + ;; + esac + fi +} + +#Get QSFP EEPROM Information +function _i2c_qsfp_eeprom_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + #status: 0 -> Down, 1 -> Up + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1) ^ 1)) ))/value` + echo $status + + if [ $status = 0 ]; then + exit + fi + + _qsfp_eeprom_var_set ${QSFP_PORT} + + cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C +} + +#Init QSFP EEPROM +function _i2c_qsfp_eeprom_init { + echo -n "QSFP EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-32 ports EEPROM + local i + for i in {1..32}; + do + _qsfp_port_i2c_var_set ${i} + + _qsfp_eeprom_var_set ${i} + + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/delete_device + fi + done + echo "DONE" +} + +#Init Main Board EEPROM +function _i2c_mb_eeprom_init { + echo -n "Main Board EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init CPU EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_I801_DEVICE}-0051 ]; then + echo "mb_eeprom 0x51" > ${PATH_I801_DEVICE}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_I801_DEVICE}-0051 ]; then + echo "0x51" > ${PATH_I801_DEVICE}/delete_device + fi + #Init MB EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_I801_DEVICE}-0055 ]; then + echo "mb_eeprom 0x55" > ${PATH_I801_DEVICE}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_I801_DEVICE}-0055 ]; then + echo "0x55" > ${PATH_I801_DEVICE}/delete_device + fi + echo "DONE" +} + +#Init PSU EEPROM +function _i2c_psu_eeprom_init { + echo -n "PSU EEPROM INIT..." + + ## modprobe eeprom + modprobe eeprom + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init PSU EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_FRU_MUX_CHAN1_DEVICE}-0050 ] || \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_FRU_MUX_CHAN0_DEVICE}-0050 ]; then + ## PUS(0) EEPROM + echo "eeprom 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_FRU_MUX_CHAN1_DEVICE}/new_device + ## PUS(1) EEPROM + echo "eeprom 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_FRU_MUX_CHAN0_DEVICE}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_FRU_MUX_CHAN1_DEVICE}-0050 ] || \ + [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_FRU_MUX_CHAN0_DEVICE}-0050 ]; then + ## PUS(0) EEPROM + echo "0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_FRU_MUX_CHAN1_DEVICE}/delete_device + ## PUS(1) EEPROM + echo "0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_FRU_MUX_CHAN0_DEVICE}/delete_device + fi + echo "DONE" +} + +#Init SFP EEPROM +function _i2c_sfp_eeprom_init { + echo -n "SFP EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-32 ports EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP1_DEVICE}-0050 ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP2_DEVICE}-0050 ]; then + echo "sff8436 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP1_DEVICE}/new_device + echo "sff8436 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP2_DEVICE}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP1_DEVICE}-0050 ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP2_DEVICE}-0050 ]; then + echo "0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP1_DEVICE}/delete_device + echo "0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_SFP2_DEVICE}/delete_device + fi + echo "DONE" +} + +#Get MotherBoard EEPROM Information +function _i2c_mb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get..." + echo "=========================================================" + + ## MB EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_I801_DEVICE}-0055/eeprom | hexdump -C + echo "done..." +} + +#Get CPU EEPROM Information +function _i2c_cpu_eeprom_get { + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get..." + echo "=========================================================" + + ## MB EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_I801_DEVICE}-0051/eeprom | hexdump -C + echo "done..." +} + +#get QSFP Status +function _i2c_qsfp_status_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + #status: 0 -> Down, 1 -> Up + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1) ^ 1)) ))/value` + echo "status=$status" +} + +#get QSFP Type +function _i2c_qsfp_type_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + _qsfp_eeprom_var_set ${QSFP_PORT} + + #Get QSFP EEPROM info + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom) + + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +#Get Board Version and Type +function _i2c_board_type_get { + boardType=`i2cget -y ${NUM_CPLD_DEVICE} 0x33 0x00` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "BOARD_ID is 0x%02x, HW Rev %d, Build Rev %d\n" $boardId $boardHwRev $boardBuildRev + +} + +#Get CPLD Version +function _i2c_cpld_version { + cpldRev=`i2cget -y ${NUM_CPLD_DEVICE} 0x33 0x01` + cpldRelease=$((($cpldRev) >> 6 & 0x01)) + cpldVersion=$((($cpldRev) & 0x3F)) + printf "CPLD is %s version(0:RD 1:Release), Revision is 0x%02x\n" $cpldRelease $cpldVersion + +} + +#Set Port LED behavior +function _i2c_port_led_set { + local gy_offset=0x0 + local bl_offset=0x0 + local mask=0x0 + if [ "${QSFP_PORT}" == "" ]; then + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + case ${QSFP_PORT} in + 1|2|3|4) + gy_offset=0x80 + bl_offset=0x90 + ;; + 5|6|7|8) + gy_offset=0x81 + bl_offset=0x90 + ;; + 9|10|11|12) + gy_offset=0x82 + bl_offset=0x91 + ;; + 13|14|15|16) + gy_offset=0x83 + bl_offset=0x91 + ;; + 17|18|19|20) + gy_offset=0x84 + bl_offset=0x92 + ;; + 21|22|23|24) + gy_offset=0x85 + bl_offset=0x92 + ;; + 25|26|27|28) + gy_offset=0x86 + bl_offset=0x93 + ;; + 29|30|31|32) + gy_offset=0x87 + bl_offset=0x93 + ;; + 33) + gy_offset=0x88 + bl_offset=0x94 + mask=0x01 + ;; + 34) + gy_offset=0x88 + bl_offset=0x94 + mask=0x02 + ;; + *) + echo "Please input 1~34" + ;; + esac + + #Set green/yellow/off + if [ ${QSFP_PORT} -lt 33 ]; then + mask=$(( 0x3 << $(( $((${QSFP_PORT} - 0x1)) % 0x4 )) * 0x2 )) + elif [ ${QSFP_PORT} = 33 ]; then + value=1 + elif [ ${QSFP_PORT} = 34 ]; then + value=2 + fi + + if [ ${QSFP_PORT} -lt 33 ]; then + if [ "${COLOR_PORT_LED}" == "green" ]; then + i2cset -m $mask -y -r ${NUM_CPLD_DEVICE} 0x33 ${gy_offset} 0x55 + elif [ "${COLOR_PORT_LED}" == "yellow" ]; then + i2cset -m $mask -y -r ${NUM_CPLD_DEVICE} 0x33 ${gy_offset} 0xaa + elif [ "${COLOR_PORT_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_CPLD_DEVICE} 0x33 ${gy_offset} 0x00 + return + fi + elif [ ${QSFP_PORT} -ge 33 ]; then + if [ "${COLOR_PORT_LED}" == "green" ] || + [ "${COLOR_PORT_LED}" == "yellow" ]; then + i2cset -m $mask -y -r ${NUM_CPLD_DEVICE} 0x33 ${gy_offset} $value + elif [ "${COLOR_PORT_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_CPLD_DEVICE} 0x33 ${gy_offset} $((! ${value} )) + return + fi + fi + + #Set Blink/Unblink + if [ ${QSFP_PORT} -lt 33 ]; then + mask=$(( 0x1 << $(( $((${QSFP_PORT} - 0x1)) % 0x8 )) )) + elif [ ${QSFP_PORT} = 33 ]; then + value=1 + elif [ ${QSFP_PORT} = 34 ]; then + value=2 + fi + + if [ "${BLINK_LED}" == "blink" ]; then + i2cset -m $mask -y -r ${NUM_CPLD_DEVICE} 0x33 ${bl_offset} 0x00 + elif [ "${BLINK_LED}" == "noblink" ]; then + i2cset -m $mask -y -r ${NUM_CPLD_DEVICE} 0x33 ${bl_offset} 0xff + fi + +} + +#Get PSU EEPROM Information +function _i2c_psu_eeprom_get { + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Get..." + echo "=========================================================" + + ## PUS(0) EEPROM + echo "========PSU1=========" + cat ${PATH_SYS_I2C_DEVICES}/${NUM_FRU_MUX_CHAN1_DEVICE}-0050/eeprom | hexdump -C + + ## PUS(1) EEPROM + echo "========PSU2=========" + cat ${PATH_SYS_I2C_DEVICES}/${NUM_FRU_MUX_CHAN0_DEVICE}-0050/eeprom | hexdump -C + + echo "done..." +} + +#Set System Status LED +function _i2c_sys_led { + + if [ "${COLOR_SYS_LED}" == "green" ]; then + # set sys_led_g (0.7) = 1 + output_reg=2 + mask=0x01 + value=0x01 + elif [ "${COLOR_SYS_LED}" == "amber" ]; then + # set sys_led_g (0.7) = 0 + output_reg=2 + mask=0x01 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + i2cset -m ${mask} -y ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 2 ${value} + echo "Done" + +} + +#Set FAN Tray LED +function _i2c_fan_tray_led { + case ${FAN_TRAY} in + 1) + i2cAddr=0x20 + ioPort=2 + if [ "${COLOR_SYS_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_SYS_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 2) + i2cAddr=0x20 + ioPort=2 + if [ "${COLOR_SYS_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_SYS_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + 3) + i2cAddr=0x20 + ioPort=3 + if [ "${COLOR_SYS_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_SYS_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 4) + i2cAddr=0x20 + ioPort=3 + if [ "${COLOR_SYS_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_SYS_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + *) + echo "Please input 1~4" + exit + ;; + esac + + if [ "${COLOR_SYS_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} $i2cAddr $ioPort 0x33 + elif [ "${COLOR_SYS_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m $mask -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} $i2cAddr $ioPort 0x00 + elif [ "${COLOR_SYS_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} $i2cAddr $ioPort 0x33 + elif [ "${COLOR_SYS_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m $mask -y -r ${NUM_FRU_MUX_CHAN2_DEVICE} $i2cAddr $ioPort 0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set FAN LED +function _i2c_fan_led { + if [ "${COLOR_SYS_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x06 -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 2 0x02 + elif [ "${COLOR_SYS_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x06 -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 2 0x00 + elif [ "${COLOR_SYS_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x06 -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 2 0x06 + elif [ "${COLOR_SYS_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x06 -y -r ${NUM_MAIN_MUX_CHAN1_DEVICE} 0x75 2 0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + + +#Get PSU Status +function _i2c_psu_status { + psu2PwGood=`cat /sys/class/gpio/gpio96/value` # PSU0_PWROK (0.0) + psu2Exist=`cat /sys/class/gpio/gpio97/value` # PSU0_PRSNT_L (0.1) + + psu1PwGood=`cat /sys/class/gpio/gpio99/value` # PSU1_PWROK (0.3) + psu1Exist=`cat /sys/class/gpio/gpio100/value` # PSU1_PRSNT_L (0.4) + printf "PSU1 Exist:%d PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood + printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood +} + + +#Main Function +function _main { + start_time_str=`date` + start_time_sec=$(date +%s) + + if [ "${EXEC_FUNC}" == "help" ]; then + _help + elif [ "${EXEC_FUNC}" == "i2c_init" ]; then + _i2c_init + elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then + _i2c_deinit + elif [ "${EXEC_FUNC}" == "i2c_temp_init" ]; then + _i2c_temp_init + elif [ "${EXEC_FUNC}" == "i2c_fan_init" ]; then + _i2c_fan_init + elif [ "${EXEC_FUNC}" == "i2c_volmon_init" ]; then + _i2c_volmon_init + elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then + _i2c_io_exp_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_init" ]; then + _i2c_gpio_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_deinit" ]; then + _i2c_gpio_deinit + elif [ "${EXEC_FUNC}" == "i2c_temp_init" ]; then + _i2c_temp_init + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then + _i2c_mb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_cpu_eeprom_get" ]; then + _i2c_cpu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then + _i2c_psu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then + _i2c_qsfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_init" ]; then + _i2c_qsfp_eeprom_init ${QSFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_sfp_eeprom_init" ]; then + _i2c_sfp_eeprom_init ${QSFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_init" ]; then + _i2c_mb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_init" ]; then + _i2c_psu_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then + _i2c_qsfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then + _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then + _i2c_led_fan_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then + _i2c_led_fan_tray_status_set + elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then + _i2c_sys_led + elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then + _i2c_fan_led + elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then + _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then + _i2c_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_cpld_version" ]; then + _i2c_cpld_version + elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_port_led_set" ]; then + _i2c_port_led_set + elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then + _i2c_init + _i2c_temp_init + _i2c_fan_init + _i2c_io_exp_init + _i2c_psu_eeprom_get + _i2c_mb_eeprom_get + _i2c_cpu_eeprom_get + _i2c_board_type_get + _i2c_cpld_version + _i2c_psu_status + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" + + echo "done!!!" +} + +_main diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/qsfp_monitor.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/qsfp_monitor.sh new file mode 100755 index 000000000000..249f179216a6 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/qsfp_monitor.sh @@ -0,0 +1,104 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=3 +I2C_UTILS="/usr/sbin/i2c_utils.sh" +QSFP_SI_SCRIPT="/usr/sbin/qsfp_si_cfg.sh" +QSFP_ARRAY=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0) + +#QSFP SI monitor +function _qsfp_si_monitor { + local i + local status + for i in {0..31}; + do + status=`${I2C_UTILS} i2c_qsfp_status_get $(expr $i + 1) | egrep '^status=.*$' | sed -e 's/status=//g'` + if [ "${status}" == "1" ]; then + _qsfp_type_check $i + fi + done +} + +#QSFP type +function _qsfp_type_check { + local port=$1 + local qsfp_type=`${I2C_UTILS} i2c_qsfp_type_get $(expr $port + 1)` + local identifier=`echo "$qsfp_type" | grep '^identifier=.*$' | sed -e 's/identifier=//g'` + if [ "${identifier}" == "11" ]; then + connector=`echo "$qsfp_type" | grep '^connector=.*$' | sed -e 's/connector=//g'` + case ${connector} in + 21|23) + #DAC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to DAC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} dac $port >/dev/null + fi + ;; + *) + #Optical + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to Optical" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} optical $port >/dev/null + fi + ;; + esac + fi +} + +#Docker exist check +function _docker_swss_check { + while true + do + # Check if syncd starts + result=`docker exec -i swss bash -c "echo -en \"SELECT 1\\nHLEN HIDDEN\" | redis-cli | sed -n 2p"` #TBD FIX ME + if [ "$result" == "3" ]; then + return + fi + sleep $INTERVAL + done +} + +#Docker exist check +function _qsfp_si_cfg_script_check { + + if [ -f ${QSFP_SI_SCRIPT} ] && [ -x ${QSFP_SI_SCRIPT} ]; then + echo "SI Script exists. Start monitor." + return + else + echo "SI Script not exist. Exit monitor." + exit + fi +} + +# main function +function _main { + #Check SI Script + _qsfp_si_cfg_script_check + #Check docker swss is running + _docker_swss_check + while true + do + _qsfp_si_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/s9180_32x_monitor.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/s9180_32x_monitor.sh new file mode 100755 index 000000000000..c110bdeaaf04 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/s9180_32x_monitor.sh @@ -0,0 +1,41 @@ +#!/bin/bash +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=5 +I2C_UTILS="/usr/sbin/i2c_utils.sh" + + +# TBD: LED status monitor +function _led_monitor { + ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null +} + +# main function +function _main { + while true + do + #PSU controlled by dummy board, + #but fan LED and fan tray LED must controlled by this service + _led_monitor + + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main \ No newline at end of file diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/LICENSE b/platform/barefoot/sonic-platform-modules-wnc-osw1800/LICENSE new file mode 100644 index 000000000000..676cdeec726b --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/LICENSE @@ -0,0 +1,15 @@ +Copyright (C) 2016 Microsoft, Inc + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/MAINTAINERS b/platform/barefoot/sonic-platform-modules-wnc-osw1800/MAINTAINERS new file mode 100644 index 000000000000..a578b60e24de --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/MAINTAINERS @@ -0,0 +1,7 @@ +# This file describes the maintainers for sonic-platform-modules-wnc-osw1800 +# See the SONiC project governance document for more information + +Name = "WNC" +Email = "wnc@wnc.com.tw" +Github = barefootnetworks +Mailinglist = wnc@wnc.com.tw diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/README.md b/platform/barefoot/sonic-platform-modules-wnc-osw1800/README.md new file mode 100644 index 000000000000..707c1068d6e6 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/README.md @@ -0,0 +1,2 @@ +# sonic-platform-modules-wnc-osw1800 +Device drivers for support of BFN platform for the SONiC project diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/changelog b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/changelog new file mode 100644 index 000000000000..466378b892d1 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/changelog @@ -0,0 +1,5 @@ +platform-modules-wnc-osw1800 (1.0) unstable; urgency=low + + * Initial release + + -- WNC Mon, 11 Nov 2015 11:11:11 -0800 diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/compat b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/compat new file mode 100644 index 000000000000..45a4fb75db86 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/compat @@ -0,0 +1 @@ +8 diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/control b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/control new file mode 100644 index 000000000000..6070cf9ad1fc --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/control @@ -0,0 +1,12 @@ +Source: platform-modules-wnc-osw1800 +Section: main +Priority: extra +Maintainer: WNC +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: platform-modules-wnc-osw1800 +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/copyright b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/copyright new file mode 100644 index 000000000000..ade42b7aa75a --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/copyright @@ -0,0 +1,15 @@ +Provides linux kernel driver for BF PCIe devices + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/rules b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/rules new file mode 100755 index 000000000000..644ab1ade433 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/debian/rules @@ -0,0 +1,38 @@ +#!/usr/bin/make -f + +export INSTALL_MOD_DIR:=extra + +PACKAGE_NAME := platform-modules-wnc-osw1800 +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MODULE_SRC := $(shell pwd)/modules +SCRIPT_SRC := $(shell pwd)/scripts +SERVICE_SRC := $(shell pwd)/service + +%: + dh $@ + +override_dh_auto_build: + make -C $(KERNEL_SRC)/build M=$(MODULE_SRC) + +override_dh_auto_install: + dh_installdirs -p$(PACKAGE_NAME) $(KERNEL_SRC)/$(INSTALL_MOD_DIR) + cp $(MODULE_SRC)/*.ko debian/$(PACKAGE_NAME)/$(KERNEL_SRC)/$(INSTALL_MOD_DIR) + dh_installdirs -p$(PACKAGE_NAME) usr/local/bin + cp -r $(SCRIPT_SRC)/* debian/$(PACKAGE_NAME)/usr/local/bin + dh_installdirs -p$(PACKAGE_NAME) /etc/systemd/system + cp -r $(SERVICE_SRC)/* debian/$(PACKAGE_NAME)/etc/systemd/system + dh_installdirs -p$(PACKAGE_NAME) /etc/systemd/system/multi-user.target.wants + ln -s ../device_node.service debian/$(PACKAGE_NAME)/etc/systemd/system/multi-user.target.wants/device_node.service + ln -s ../driver_load.service debian/$(PACKAGE_NAME)/etc/systemd/system/multi-user.target.wants/driver_load.service + +override_dh_usrlocal: + +override_dh_pysupport: + +override_dh_clean: + dh_clean + rm -f $(MODULE_SRC)/*.o $(MODULE_SRC)/*.ko $(MODULE_SRC)/*.mod.c $(MODULE_SRC)/.*.cmd + rm -f $(MODULE_SRC)/Module.markers $(MODULE_SRC)/Module.symvers $(MODULE_SRC)/modules.order + rm -rf $(MODULE_SRC)/.tmp_versions + diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/Makefile b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/Makefile new file mode 100644 index 000000000000..29b904dd3232 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/Makefile @@ -0,0 +1,6 @@ +obj-m := bf_kdrv.o +obj-m += bf_tun.o +obj-m += i2c-mcp2221.o +obj-m += wnc_cpld.o +obj-m += wnc_cpld3.o +obj-m += wnc_eeprom.o diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/bf_kdrv.c b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/bf_kdrv.c new file mode 100644 index 000000000000..fd66ad09493a --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/bf_kdrv.c @@ -0,0 +1,1254 @@ +/******************************************************************************* + * BAREFOOT NETWORKS CONFIDENTIAL & PROPRIETARY + * + * Copyright (c) 2015-2016 Barefoot Networks, Inc. + + * All Rights Reserved. + * + * NOTICE: All information contained herein is, and remains the property of + * Barefoot Networks, Inc. and its suppliers, if any. The intellectual and + * technical concepts contained herein are proprietary to Barefoot Networks, + * Inc. + * and its suppliers and may be covered by U.S. and Foreign Patents, patents in + * process, and are protected by trade secret or copyright law. + * Dissemination of this information or reproduction of this material is + * strictly forbidden unless prior written permission is obtained from + * Barefoot Networks, Inc. + * + * No warranty, explicit or implicit is provided, unless granted under a + * written agreement with Barefoot Networks, Inc. + * + * $Id: $ + * + ******************************************************************************/ +/** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2015 Barefoot Networks. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the... + * + **/ + +/* bf_drv kernel module + * + * This is kernel mode driver for Tofino chip. + * Provides user space mmap service and user space "wait for interrupt" + * and "enable interrupt" services. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 11, 0) + #include +#else + #include +#endif + +#include +#include +#include + +#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 16, 0) +//#error unsupported linux kernel version +#endif + +/* TBD: Need to build with CONFIG_PCI_MSI */ +extern int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec); +extern int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, int minvec, int maxvec); + +#define PCI_VENDOR_ID_BF 0x1d1c +#define TOFINO_DEV_ID_A0 0x01 +#define TOFINO_DEV_ID_B0 0x10 + +#ifndef PCI_MSIX_ENTRY_SIZE +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 +#define PCI_MSIX_ENTRY_DATA 8 +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 +#endif + +#define BF_CLASS_NAME "bf" +#define BF_MAX_DEVICE_CNT 256 +#define BF_INTR_MODE_NONE_NAME "none" +#define BF_INTR_MODE_LEGACY_NAME "legacy" +#define BF_INTR_MODE_MSI_NAME "msi" +#define BF_INTR_MODE_MSIX_NAME "msix" +#define BF_MAX_BAR_MAPS 6 +#define BF_MSIX_ENTRY_CNT 128 /* TBD make it 512 */ +#define BF_MSI_ENTRY_CNT 2 + +/* interrupt mode */ +enum bf_intr_mode { + BF_INTR_MODE_NONE = 0, + BF_INTR_MODE_LEGACY, + BF_INTR_MODE_MSI, + BF_INTR_MODE_MSIX +}; + +/* device memory */ +struct bf_dev_mem { + const char *name; + phys_addr_t addr; + resource_size_t size; + void __iomem *internal_addr; +}; + +struct bf_listener { + struct bf_pci_dev *bfdev; + s32 event_count[BF_MSIX_ENTRY_CNT]; + int minor; + struct bf_listener *next; +}; + +/* device information */ +struct bf_dev_info { + struct module *owner; + struct device *dev; + int minor; + atomic_t event[BF_MSIX_ENTRY_CNT]; + wait_queue_head_t wait; + const char *version; + struct bf_dev_mem mem[BF_MAX_BAR_MAPS]; + struct msix_entry *msix_entries; + long irq; /* first irq vector */ + int num_irq; /* number of irq vectors */ + unsigned long irq_flags;/* sharable ?? */ + int pci_error_state; /* was there a pci bus error */ +}; + +/* cookie to be passed to IRQ handler, useful especially with MSIX */ +struct bf_int_vector { + struct bf_pci_dev *bf_dev; + int int_vec_offset; +}; + + +/** + * A structure describing the private information for a BF pcie device. + */ +struct bf_pci_dev { + struct bf_dev_info info; + struct pci_dev *pdev; + enum bf_intr_mode mode; + u8 instance; + char name[16]; + struct bf_int_vector bf_int_vec[BF_MSIX_ENTRY_CNT]; + struct bf_listener *listener_head; /* head of a singly linked list of + listeners */ +}; + +/* Keep any global information here that must survive even after the + * bf_pci_dev is free-ed up. + */ +struct bf_global { + struct bf_pci_dev *bfdev ; + struct cdev *bf_cdev; + struct fasync_struct *async_queue; +}; + +static int bf_major; +static int bf_minor[BF_MAX_DEVICE_CNT] = {0}; +static struct class *bf_class = NULL; +static char *intr_mode = NULL; +static enum bf_intr_mode bf_intr_mode_default = BF_INTR_MODE_MSI; +static spinlock_t bf_nonisr_lock; +/* dev->minor should index into this array */ +static struct bf_global bf_global[BF_MAX_DEVICE_CNT]; + +static void bf_add_listener(struct bf_pci_dev *bfdev, + struct bf_listener *listener) +{ + struct bf_listener **cur_listener = &bfdev->listener_head; + + if (!listener) { + return; + } + spin_lock(&bf_nonisr_lock); + + while (*cur_listener) { + cur_listener = &((*cur_listener)->next); + } + *cur_listener = listener; + listener->next = NULL; + + spin_unlock(&bf_nonisr_lock); +} + +static void bf_remove_listener(struct bf_pci_dev *bfdev, + struct bf_listener *listener) +{ + struct bf_listener **cur_listener = &bfdev->listener_head; + + /* in case of certain error conditions, this function might be called after bf_pci_remove() + */ + if (!bfdev || !listener) { + return; + } + spin_lock(&bf_nonisr_lock); + + if (*cur_listener == listener) { + *cur_listener = listener->next; + } else { + while (*cur_listener) { + if ((*cur_listener)->next == listener) { + (*cur_listener)->next = listener->next; + break; + } + cur_listener = &((*cur_listener)->next); + } + listener->next = NULL; + } + + spin_unlock(&bf_nonisr_lock); +} + +/* a pool of minor numbers is maintained */ +/* return the first available minor number */ +static int bf_get_next_minor_no(int *minor) +{ + int i; + + spin_lock(&bf_nonisr_lock); + for(i = 0; i < BF_MAX_DEVICE_CNT; i++) { + if (bf_minor[i] == 0) { + *minor = i; + bf_minor[i] = 1; /* mark it as taken */ + spin_unlock(&bf_nonisr_lock); + return 0; + } + } + *minor = -1; + spin_unlock(&bf_nonisr_lock); + return -1; +} + +/* return a minor number back to the pool for recycling */ +static int bf_return_minor_no(int minor) +{ + int err; + + spin_lock(&bf_nonisr_lock); + if (bf_minor[minor] == 0) { /* was already returned */ + err = -1; /* don't change anything, but return error */ + } else { + bf_minor[minor] = 0; /* mark it as available */ + err = 0; + } + spin_unlock(&bf_nonisr_lock); + return err; +} + +static inline struct bf_pci_dev *bf_get_pci_dev(struct bf_dev_info *info) +{ + return container_of(info, struct bf_pci_dev, info); +} + +/* + * It masks the msix on/off of generating MSI-X messages. + */ +static void +bf_msix_mask_irq(struct msi_desc *desc, int32_t state) +{ + u32 mask_bits = desc->masked; + unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE + + PCI_MSIX_ENTRY_VECTOR_CTRL; + + if (state != 0) + mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; + else + mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; + + if (mask_bits != desc->masked) { + writel(mask_bits, desc->mask_base + offset); + readl(desc->mask_base); + desc->masked = mask_bits; + } +} + +/** + * irqcontrol can be used to disable/enable interrupt from user space processes. + * + * @param bf_dev + * pointer to bf_pci_dev + * @param irq_state + * state value. 1 to enable interrupt, 0 to disable interrupt. + * + * @return + * - On success, 0. + * - On failure, a negative value. + */ +static int +bf_pci_irqcontrol(struct bf_pci_dev *bfdev, s32 irq_state) +{ + struct pci_dev *pdev = bfdev->pdev; + + pci_cfg_access_lock(pdev); + if (bfdev->mode == BF_INTR_MODE_LEGACY) + pci_intx(pdev, !!irq_state); + + else if (bfdev->mode == BF_INTR_MODE_MSIX) { + struct msi_desc *desc; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,2,0) + list_for_each_entry(desc, &pdev->msi_list, list) + bf_msix_mask_irq(desc, irq_state); +#else + for_each_pci_msi_entry(desc, pdev) + bf_msix_mask_irq(desc, irq_state); +#endif + } + pci_cfg_access_unlock(pdev); + + return 0; +} + +/** + * interrupt handler which will check if the interrupt is from the right + * device. If so, disable it here and will be enabled later. + */ +static irqreturn_t bf_pci_irqhandler(int irq, struct bf_pci_dev *bfdev) +{ + /* Legacy mode need to mask in hardware */ + if (bfdev->mode == BF_INTR_MODE_LEGACY && + !pci_check_and_mask_intx(bfdev->pdev)) + return IRQ_NONE; + + /* NOTE : if bfdev->info.pci_error_state == 1, then do not access the + * device and return IRQ_NOTHANDLED. + */ + /* Message signal mode, no share IRQ and automasked */ + return IRQ_HANDLED; +} + +/* Remap pci resources described by bar #pci_bar */ +static int +bf_pci_setup_iomem(struct pci_dev *dev, struct bf_dev_info *info, + int n, int pci_bar, const char *name) +{ + unsigned long addr, len; + void *internal_addr; + + if (sizeof(info->mem) / sizeof(info->mem[0]) <= n) + return -EINVAL; + + addr = pci_resource_start(dev, pci_bar); + len = pci_resource_len(dev, pci_bar); + if (addr == 0 || len == 0) + return -1; + internal_addr = pci_ioremap_bar(dev, pci_bar); + if (internal_addr == NULL) + return -1; + info->mem[n].name = name; + info->mem[n].addr = addr; + info->mem[n].internal_addr = internal_addr; + info->mem[n].size = len; + return 0; +} + +/* Unmap previously ioremap'd resources */ +static void +bf_pci_release_iomem(struct bf_dev_info *info) +{ + int i; + + for (i = 0; i < BF_MAX_BAR_MAPS; i++) { + if (info->mem[i].internal_addr) + iounmap(info->mem[i].internal_addr); + } +} + +static int +bf_setup_bars(struct pci_dev *dev, struct bf_dev_info *info) +{ + int i, iom, ret; + unsigned long flags; + static const char *bar_names[BF_MAX_BAR_MAPS] = { + "BAR0", "BAR1", "BAR2", "BAR3", "BAR4", "BAR5", + }; + + iom = 0; + + for (i = 0; i < BF_MAX_BAR_MAPS; i++) { + if (pci_resource_len(dev, i) != 0 && + pci_resource_start(dev, i) != 0) { + flags = pci_resource_flags(dev, i); + if (flags & IORESOURCE_MEM) { + ret = bf_pci_setup_iomem(dev, info, iom, i, bar_names[i]); + if (ret != 0) + return ret; + iom++; + } + } + } + return (iom != 0) ? ret : -ENOENT; +} + +static irqreturn_t bf_interrupt(int irq, void *bfdev_id) +{ + struct bf_pci_dev *bfdev = ((struct bf_int_vector *)bfdev_id)->bf_dev; + int vect_off = ((struct bf_int_vector *)bfdev_id)->int_vec_offset; + + irqreturn_t ret = bf_pci_irqhandler(irq, bfdev); + + if (ret == IRQ_HANDLED) + atomic_inc(&(bfdev->info.event[vect_off])); + + return ret; +} + +static unsigned int bf_poll(struct file *filep, poll_table *wait) +{ + struct bf_listener *listener = (struct bf_listener *)filep->private_data; + struct bf_pci_dev *bfdev = listener->bfdev; + int i; + + if (!bfdev) { + return -ENODEV; + } + if (!bfdev->info.irq) + return -EIO; + + poll_wait(filep, &bfdev->info.wait, wait); + + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) + if (listener->event_count[i] != atomic_read(&bfdev->info.event[i])) + return POLLIN | POLLRDNORM; + return 0; +} + +static int bf_find_mem_index(struct vm_area_struct *vma) +{ + struct bf_pci_dev *bfdev = vma->vm_private_data; + if (vma->vm_pgoff < BF_MAX_BAR_MAPS) { + if (bfdev->info.mem[vma->vm_pgoff].size == 0) + return -1; + return (int)vma->vm_pgoff; + } + return -1; +} + +static const struct vm_operations_struct bf_physical_vm_ops = { +#ifdef CONFIG_HAVE_IOREMAP_PROT + .access = generic_access_phys, +#endif +}; + +static int bf_mmap_physical(struct vm_area_struct *vma) +{ + struct bf_pci_dev *bfdev = vma->vm_private_data; + int bar = bf_find_mem_index(vma); + struct bf_dev_mem *mem; + if (bar < 0) + return -EINVAL; + + mem = bfdev->info.mem + bar; + + if (mem->addr & ~PAGE_MASK) + return -ENODEV; + if (vma->vm_end - vma->vm_start > mem->size) + return -EINVAL; + + vma->vm_ops = &bf_physical_vm_ops; + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + /* + * We cannot use the vm_iomap_memory() helper here, + * because vma->vm_pgoff is the map index we looked + * up above in bf_find_mem_index(), rather than an + * actual page offset into the mmap. + * + * So we just do the physical mmap without a page + * offset. + */ + return remap_pfn_range(vma, vma->vm_start, mem->addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +static int bf_mmap(struct file *filep, struct vm_area_struct *vma) +{ + struct bf_listener *listener = filep->private_data; + struct bf_pci_dev *bfdev = listener->bfdev; + int bar; + unsigned long requested_pages, actual_pages; + + if (!bfdev) { + return -ENODEV; + } + if (vma->vm_end < vma->vm_start) + return -EINVAL; + + vma->vm_private_data = bfdev; + + bar = bf_find_mem_index(vma); + if (bar < 0) + return -EINVAL; + + requested_pages = vma_pages(vma); + actual_pages = ((bfdev->info.mem[bar].addr & ~PAGE_MASK) + + bfdev->info.mem[bar].size + PAGE_SIZE -1) >> PAGE_SHIFT; + if (requested_pages > actual_pages) + return -EINVAL; + + return bf_mmap_physical(vma); +} + +static int bf_fasync(int fd, struct file *filep, int mode) +{ + int minor; + + if (!filep->private_data) { + return (-EINVAL); + } + minor = ((struct bf_listener *)filep->private_data)->minor; + if (minor >= BF_MAX_DEVICE_CNT) { + return (-EINVAL); + } + if (mode == 0 && &bf_global[minor].async_queue == NULL) { + return 0; /* nothing to do */ + } + return (fasync_helper(fd, filep, mode, &bf_global[minor].async_queue)); +} + +static int bf_open(struct inode *inode, struct file *filep) +{ + struct bf_pci_dev *bfdev; + struct bf_listener *listener; + int i; + + bfdev = bf_global[iminor(inode)].bfdev; + listener = kmalloc(sizeof(*listener), GFP_KERNEL); + if (listener) { + listener->bfdev = bfdev; + listener->minor = bfdev->info.minor; + listener->next = NULL; + bf_add_listener(bfdev, listener); + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) + listener->event_count[i] = atomic_read(&bfdev->info.event[i]); + filep->private_data = listener; + return 0; + } else { + return(-ENOMEM); + } +} + +static int bf_release(struct inode *inode, struct file *filep) +{ + struct bf_listener *listener = filep->private_data; + + bf_fasync(-1, filep, 0); /* empty any process id in the notification list */ + if (listener->bfdev) { + bf_remove_listener(listener->bfdev, listener); + } + kfree(listener); + return 0; +} + +/* user space support: make read() system call after poll() of select() */ +static ssize_t bf_read(struct file *filep, char __user *buf, + size_t count, loff_t *ppos) +{ + struct bf_listener *listener = filep->private_data; + struct bf_pci_dev *bfdev = listener->bfdev; + int retval, event_count[BF_MSIX_ENTRY_CNT]; + int i, mismatch_found = 0; /* OR of per vector mismatch */ + unsigned char cnt_match[BF_MSIX_ENTRY_CNT]; /* per vector mismatch */ + + if (!bfdev) { + return -ENODEV; + } + /* irq must be setup for read() to work */ + if (!bfdev->info.irq) + return -EIO; + + /* ensure that there is enough space on user buffer for the given interrupt + * mode */ + if (bfdev->mode == BF_INTR_MODE_MSIX) { + if (count < sizeof(s32)*BF_MSIX_ENTRY_CNT) + return -EINVAL; + count = sizeof(s32)*BF_MSIX_ENTRY_CNT; + } else if (bfdev->mode == BF_INTR_MODE_MSI) { + if (count < sizeof(s32)*BF_MSI_ENTRY_CNT) + return -EINVAL; + count = sizeof(s32)*BF_MSI_ENTRY_CNT; + } else { + if (count < sizeof(s32)) + return -EINVAL; + count = sizeof(s32); + } + + do { + set_current_state(TASK_INTERRUPTIBLE); + + for (i = 0; i < (count/sizeof(s32)); i++) { + event_count[i] = atomic_read(&(bfdev->info.event[i])); + if (event_count[i] != listener->event_count[i]) { + mismatch_found |= 1; + cnt_match[i] = 1; + } else { + event_count[i] = 0; + cnt_match[i] = 0; + } + } + if (mismatch_found) { + __set_current_state(TASK_RUNNING); + if (copy_to_user(buf, &event_count, count)) + retval = -EFAULT; + else { /* adjust the listener->event_count; */ + for (i = 0 ; i < (count/sizeof(s32)); i++) { + if (cnt_match[i]) { + listener->event_count[i] = event_count[i]; + } + } + retval = count; + } + break; + } + + if (filep->f_flags & O_NONBLOCK) { + retval = -EAGAIN; + break; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + schedule(); + } while (1); + + __set_current_state(TASK_RUNNING); + + return retval; +} + +/* user space is supposed to call this after it is done with interrupt + * processing + */ +static ssize_t bf_write(struct file *filep, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct bf_listener *listener = filep->private_data; + struct bf_pci_dev *bfdev = listener->bfdev; + ssize_t ret; + s32 int_en; + + if (!bfdev || !bfdev->info.irq) + return -EIO; + + if (count != sizeof(s32)) + return -EINVAL; + + if (copy_from_user(&int_en, buf, count)) + return -EFAULT; + + /* clear pci_error_state */ + bfdev->info.pci_error_state = 0; + + ret = bf_pci_irqcontrol(bfdev, int_en); + + return ret ? ret : sizeof(s32); +} + +static const struct file_operations bf_fops = { + .owner = THIS_MODULE, + .open = bf_open, + .release = bf_release, + .read = bf_read, + .write = bf_write, + .mmap = bf_mmap, + .poll = bf_poll, + .fasync = bf_fasync, +}; + +static int bf_major_init(struct bf_pci_dev *bfdev, int minor) +{ + struct cdev *cdev; + static const char name[] = "bf"; + dev_t bf_dev = 0; + int result; + + result = alloc_chrdev_region(&bf_dev, 0, BF_MAX_DEVICE_CNT, name); + if (result) + return result; + + result = -ENOMEM; + cdev = cdev_alloc(); + if (!cdev) { + goto fail_dev_add; + } + cdev->ops = &bf_fops; + cdev->owner = THIS_MODULE; + kobject_set_name(&cdev->kobj, "%s", name); + result = cdev_add(cdev, bf_dev, BF_MAX_DEVICE_CNT); + + if (result) + goto fail_dev_add; + + bf_major = MAJOR(bf_dev); + bf_global[minor].bf_cdev = cdev; + return 0; + +fail_dev_add: + unregister_chrdev_region(bf_dev, BF_MAX_DEVICE_CNT); + return result; +} + +static void bf_major_cleanup(struct bf_pci_dev *bfdev, int minor) +{ + unregister_chrdev_region(MKDEV(bf_major, 0), BF_MAX_DEVICE_CNT); + cdev_del(bf_global[minor].bf_cdev); +} + +static int bf_init_cdev(struct bf_pci_dev *bfdev, int minor) +{ + int ret; + ret = bf_major_init(bfdev, minor); + if (ret) + return ret; + + bf_class = class_create(THIS_MODULE, BF_CLASS_NAME); + if (!bf_class) { + printk(KERN_ERR "create_class failed for bf_dev\n"); + ret = -ENODEV; + goto err_class_register; + } + return 0; + +err_class_register: + bf_major_cleanup(bfdev, minor); + return ret; +} + +static void bf_remove_cdev(struct bf_pci_dev *bfdev) +{ + class_destroy(bf_class); + bf_major_cleanup(bfdev, bfdev->info.minor); +} + + +/** + * bf_register_device - register a new userspace mem device + * @parent: parent device + * @bfdev: bf pci device + * + * returns zero on success or a negative error code. + */ +int bf_register_device(struct device *parent, struct bf_pci_dev *bfdev) +{ + struct bf_dev_info *info = &bfdev->info; + int i, j, ret = 0; + int minor; + + if (!parent || !info || !info->version) + return -EINVAL; + + init_waitqueue_head(&info->wait); + + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) { + atomic_set(&info->event[i], 0); + } + + if (bf_get_next_minor_no(&minor)) { + return -EINVAL; + } + + ret = bf_init_cdev(bfdev, minor); + if (ret) { + printk(KERN_ERR "BF: device cdev creation failed\n"); + return ret; + } + + info->dev = device_create(bf_class, parent, + MKDEV(bf_major, minor), bfdev, + "bf%d", minor); + if (!info->dev) { + printk(KERN_ERR "BF: device creation failed\n"); + return -ENODEV; + } + + info->minor = minor; + + /* bind ISRs and request interrupts */ + if (info->irq && (bfdev->mode != BF_INTR_MODE_NONE)) { + /* + * Note that we deliberately don't use devm_request_irq + * here. The parent module can unregister the UIO device + * and call pci_disable_msi, which requires that this + * irq has been freed. However, the device may have open + * FDs at the time of unregister and therefore may not be + * freed until they are released. + */ + if (bfdev->mode == BF_INTR_MODE_LEGACY) { + ret = request_irq(info->irq, bf_interrupt, + info->irq_flags, bfdev->name, + (void *)&(bfdev->bf_int_vec[0])); + if (ret) { + printk(KERN_ERR "bf failed to request legacy irq %ld error %d\n", + info->irq, ret); + return ret; + } + printk(KERN_NOTICE "BF allocating legacy int vector %ld\n", info->irq); + } else if (bfdev->mode == BF_INTR_MODE_MSIX) { + for (i = 0; i < info->num_irq; i++) { + ret = request_irq(info->msix_entries[i].vector, bf_interrupt, + info->irq_flags, bfdev->name, + (void *)&(bfdev->bf_int_vec[i])); + if (ret) { + /* undo all other previous bindings */ + printk(KERN_ERR "bf failed to request MSIX ret %d itr %d\n", ret, i); + for (j = i - 1; j >= 0; j--) { + free_irq(info->msix_entries[j].vector, + (void *)&(bfdev->bf_int_vec[j])); + } + return ret; + } + } + printk(KERN_NOTICE "BF allocating %d MSIx vectors from %ld\n", + info->num_irq, info->irq); + } else if (bfdev->mode == BF_INTR_MODE_MSI) { + for (i = 0; i < info->num_irq; i++) { + ret = request_irq(info->irq + i, bf_interrupt, + info->irq_flags, bfdev->name, + (void *)&(bfdev->bf_int_vec[i])); + if (ret) { + /* undo all other previous bindings */ + printk(KERN_ERR "bf failed to request MSI ret %d itr %d\n", ret, i); + for (j = i - 1; j >= 0; j--) { + free_irq(info->irq + j, (void *)&(bfdev->bf_int_vec[j])); + } + return ret; + } + } + printk(KERN_NOTICE "BF allocating %d MSI vectors from %ld\n", + info->num_irq, info->irq); + } + } + return 0; +} + +/** + * bf_unregister_device - register a new userspace mem device + * @bfdev: bf pci device + * + * returns none + */ +void bf_unregister_device(struct bf_pci_dev *bfdev) +{ + struct bf_dev_info *info = &bfdev->info; + int i; + + if (info->irq) { + if (bfdev->mode == BF_INTR_MODE_LEGACY) { + free_irq(info->irq, (void *)&(bfdev->bf_int_vec[0])); + } else if (bfdev->mode == BF_INTR_MODE_MSIX) { + for (i = 0; i < info->num_irq; i++) { + free_irq(info->msix_entries[i].vector, (void *)&(bfdev->bf_int_vec[i])); + } + } else if (bfdev->mode == BF_INTR_MODE_MSI) { + for (i = 0; i < info->num_irq; i++) { + free_irq(info->irq + i, (void *)&(bfdev->bf_int_vec[i])); + } + } + } + device_destroy(bf_class, MKDEV(bf_major, info->minor)); + bf_remove_cdev(bfdev); + bf_return_minor_no(info->minor); + return; +} + +static inline struct device *pci_dev_to_dev(struct pci_dev *pdev) +{ + return &pdev->dev; +} + +static int +bf_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct bf_pci_dev *bfdev; + int err, pci_use_highmem; + int i, num_irq; + + memset(bf_global, 0, sizeof(bf_global)); + + bfdev = kzalloc(sizeof(struct bf_pci_dev), GFP_KERNEL); + if (!bfdev) + return -ENOMEM; + + /* init the cookies to be passed to ISRs */ + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) { + bfdev->bf_int_vec[i].int_vec_offset = i; + bfdev->bf_int_vec[i].bf_dev = bfdev; + } + + /* initialize intr_mode to none */ + bfdev->mode = BF_INTR_MODE_NONE; + + /* clear pci_error_state */ + bfdev->info.pci_error_state = 0; + + /* + * enable device + */ + err = pci_enable_device(pdev); + if (err != 0) { + dev_err(&pdev->dev, "Cannot enable PCI device\n"); + goto fail_free; + } + + /* + * reserve device's PCI memory regions for use by this + * module + */ + err = pci_request_regions(pdev, "bf_umem"); + if (err != 0) { + dev_err(&pdev->dev, "Cannot request regions\n"); + goto fail_pci_disable; + } + /* remap IO memory */ + err = bf_setup_bars(pdev, &bfdev->info); + if (err != 0) + goto fail_release_iomem; + + if (!dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64)) && + !dma_set_coherent_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(64))) { + pci_use_highmem = 1; + } else { + err = dma_set_mask(pci_dev_to_dev(pdev), DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(pci_dev_to_dev(pdev), + DMA_BIT_MASK(32)); + if (err) { + dev_err(pci_dev_to_dev(pdev), "No usable DMA " + "configuration, aborting\n"); + goto fail_release_iomem; + } + } + pci_use_highmem = 0; + } + + /* enable pci error reporting */ + /* for the current kernel version, kernel config must have set the followings: + * CONFIG_PCIEPORTBUS=y and CONFIG_PCIEAER = y + * we have pci_error_handlers defined that gets invoked by kernel AER module + * upon detecting the pcie error on this device's addresses. + * However, there seems no way that AER would pass the offending addresses + * to the callback functions. AER logs the error messages on the console. + * This driver's calback function send the SIGIO signal to the user space + * to indicate the error condition. + */ + pci_enable_pcie_error_reporting(pdev); + + /* enable bus mastering on the device */ + pci_set_master(pdev); + + /* fill in bfdev info */ + bfdev->info.version = "0.2"; + bfdev->info.owner = THIS_MODULE; + bfdev->pdev = pdev; + + switch (bf_intr_mode_default) { +#ifdef CONFIG_PCI_MSI + case BF_INTR_MODE_MSIX: + /* Only 1 msi-x vector needed */ + bfdev->info.msix_entries = kcalloc(BF_MSIX_ENTRY_CNT, + sizeof(struct msix_entry), GFP_KERNEL); + if (!bfdev->info.msix_entries) { + err = -ENOMEM; + goto fail_clear_pci_master; + } + for (i = 0; i < BF_MSIX_ENTRY_CNT; i++) { + bfdev->info.msix_entries[i].entry= i; + } + num_irq = pci_enable_msix_range(pdev, bfdev->info.msix_entries, + BF_MSIX_ENTRY_CNT, BF_MSIX_ENTRY_CNT); + if (num_irq == BF_MSIX_ENTRY_CNT) { + dev_dbg(&pdev->dev, "using MSI-X"); + bfdev->info.num_irq = num_irq; + bfdev->info.irq = bfdev->info.msix_entries[0].vector; + bfdev->mode = BF_INTR_MODE_MSIX; + printk(KERN_DEBUG "bf using %d MSIX irq from %ld\n", num_irq, + bfdev->info.irq); + break; + } else { + if (num_irq) + pci_disable_msix(pdev); + kfree(bfdev->info.msix_entries); + bfdev->info.msix_entries = NULL; + printk(KERN_ERR "bf error allocating MSIX vectors. Trying MSI...\n"); + /* and, fall back to MSI */ + } + /* ** intentional no-break */ + case BF_INTR_MODE_MSI: + num_irq = pci_enable_msi_range(pdev, BF_MSI_ENTRY_CNT, BF_MSI_ENTRY_CNT); + if (num_irq > 0) { + dev_dbg(&pdev->dev, "using MSI"); + bfdev->info.num_irq = num_irq; + bfdev->info.irq = pdev->irq; + bfdev->mode = BF_INTR_MODE_MSI; + printk(KERN_DEBUG "bf using %d MSI irq from %ld\n", bfdev->info.num_irq, + bfdev->info.irq); + break; + } +#endif /* CONFIG_PCI_MSI */ + /* fall back to Legacy Interrupt, intentional no-break */ + + case BF_INTR_MODE_LEGACY: + if (pci_intx_mask_supported(pdev)) { + dev_dbg(&pdev->dev, "using INTX"); + bfdev->info.irq_flags = IRQF_SHARED; + bfdev->info.irq = pdev->irq; + bfdev->mode = BF_INTR_MODE_LEGACY; + printk(KERN_DEBUG "bf using LEGACY irq %ld\n", bfdev->info.irq); + break; + } + dev_notice(&pdev->dev, "PCI INTx mask not supported\n"); + /* fall back to no Interrupt, intentional no-break */ + case BF_INTR_MODE_NONE: + bfdev->info.irq = 0; + bfdev->info.num_irq = 0; + bfdev->mode = BF_INTR_MODE_NONE; + break; + + default: + dev_err(&pdev->dev, "invalid IRQ mode %u", bf_intr_mode_default); + err = -EINVAL; + goto fail_clear_pci_master; + } + + pci_set_drvdata(pdev, bfdev); + sprintf(bfdev->name, "bf_%d", bfdev->info.minor); + /* register bf driver */ + err = bf_register_device(&pdev->dev, bfdev); + if (err != 0) + goto fail_release_irq; + + bf_global[bfdev->info.minor].async_queue = NULL; + bf_global[bfdev->info.minor].bfdev = bfdev; + + dev_info(&pdev->dev, "bf device %d registered with irq %ld\n", + bfdev->instance, bfdev->info.irq); + printk(KERN_ALERT "bf probe ok\n"); + return 0; + +fail_release_irq: + pci_set_drvdata(pdev, NULL); + if (bfdev->mode == BF_INTR_MODE_MSIX) { + pci_disable_msix(bfdev->pdev); + kfree(bfdev->info.msix_entries); + bfdev->info.msix_entries = NULL; + } + else if (bfdev->mode == BF_INTR_MODE_MSI) + pci_disable_msi(bfdev->pdev); +fail_clear_pci_master: + pci_clear_master(pdev); +fail_release_iomem: + bf_pci_release_iomem(&bfdev->info); + pci_release_regions(pdev); +fail_pci_disable: + pci_disable_device(pdev); +fail_free: + kfree(bfdev); + + printk(KERN_ERR "bf probe not ok\n"); + return err; +} + +static void +bf_pci_remove(struct pci_dev *pdev) +{ + struct bf_pci_dev *bfdev = pci_get_drvdata(pdev); + struct bf_listener *cur_listener; + + bf_unregister_device(bfdev); + if (bfdev->mode == BF_INTR_MODE_MSIX) { + pci_disable_msix(pdev); + kfree(bfdev->info.msix_entries); + bfdev->info.msix_entries = NULL; + } + else if (bfdev->mode == BF_INTR_MODE_MSI) + pci_disable_msi(pdev); + pci_clear_master(pdev); + bf_pci_release_iomem(&bfdev->info); + pci_release_regions(pdev); + pci_disable_pcie_error_reporting(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + bf_global[bfdev->info.minor].bfdev = NULL; + /* existing filep structures in open file(s) must be informed that + * bf_pci_dev is no longer valid */ + spin_lock(&bf_nonisr_lock); + cur_listener = bfdev->listener_head; + while (cur_listener) { + cur_listener->bfdev = NULL; + cur_listener = cur_listener->next; + } + spin_unlock(&bf_nonisr_lock); + kfree(bfdev); +} + +/** + * bf_pci_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * called when root complex detects pci error associated with the device + */ +static pci_ers_result_t bf_pci_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct bf_pci_dev *bfdev = pci_get_drvdata(pdev); + int minor; + + if (!bfdev) { + return PCI_ERS_RESULT_NONE; + } + printk(KERN_ERR "pci_err_detected state %d\n", state); + if (state == pci_channel_io_perm_failure || state == pci_channel_io_frozen) { + bfdev->info.pci_error_state = 1; + /* send a signal to the user space program of the error */ + minor = bfdev->info.minor; + if (minor < BF_MAX_DEVICE_CNT && bf_global[minor].async_queue) { + kill_fasync(&bf_global[minor].async_queue, SIGIO, POLL_ERR); + } + return PCI_ERS_RESULT_DISCONNECT; + } else { + return PCI_ERS_RESULT_NONE; + } +} + +/** + * bf_pci_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t bf_pci_slot_reset(struct pci_dev *pdev) +{ + /* nothing to do for now as we do not expect to get backto normal after + * a pcie link reset + * TBD: fill in this function if tofino can recover after an error + */ + return PCI_ERS_RESULT_DISCONNECT; +} + +/** + * bf_pci_resume - called when kernel thinks the device is up on PCIe. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void bf_pci_resume(struct pci_dev *pdev) +{ + /* this function should never be called for Tofinoi */ + struct bf_pci_dev *bfdev = pci_get_drvdata(pdev); + + printk(KERN_ERR "BF io_resume invoked after pci error\n"); + if (bfdev) { + bfdev->info.pci_error_state = 0; + } +} + +static int +bf_config_intr_mode(char *intr_str) +{ + if (!intr_str) { + pr_info("Use MSIX interrupt by default\n"); + return 0; + } + + if (!strcmp(intr_str, BF_INTR_MODE_MSIX_NAME)) { + bf_intr_mode_default = BF_INTR_MODE_MSIX; + pr_info("Use MSIX interrupt\n"); + } else if (!strcmp(intr_str, BF_INTR_MODE_MSI_NAME)) { + bf_intr_mode_default = BF_INTR_MODE_MSI; + pr_info("Use MSI interrupt\n"); + } else if (!strcmp(intr_str, BF_INTR_MODE_LEGACY_NAME)) { + bf_intr_mode_default = BF_INTR_MODE_LEGACY; + pr_info("Use legacy interrupt\n"); + } else { + pr_info("Error: bad parameter - %s\n", intr_str); + return -EINVAL; + } + + return 0; +} + +static const struct pci_device_id bf_pci_tbl[] = { + {PCI_VDEVICE(BF, TOFINO_DEV_ID_A0), 0}, + {PCI_VDEVICE(BF, TOFINO_DEV_ID_B0), 0}, + /* required last entry */ + { .device = 0 } +}; + +/* PCI bus error handlers */ +static struct pci_error_handlers bf_pci_err_handler = { + .error_detected = bf_pci_error_detected, + .slot_reset = bf_pci_slot_reset, + .resume = bf_pci_resume, +}; + +static struct pci_driver bf_pci_driver = { + .name = "bf", + .id_table = bf_pci_tbl, + .probe = bf_pci_probe, + .remove = bf_pci_remove, + .err_handler = &bf_pci_err_handler +}; + +static int __init +bfdrv_init(void) +{ + int ret; + + ret = bf_config_intr_mode(intr_mode); + if (ret < 0) + return ret; + + spin_lock_init(&bf_nonisr_lock); + return pci_register_driver(&bf_pci_driver); +} + +static void __exit +bfdrv_exit(void) +{ + pci_unregister_driver(&bf_pci_driver); +} + +module_init(bfdrv_init); +module_exit(bfdrv_exit); + +module_param(intr_mode, charp, S_IRUGO); +MODULE_PARM_DESC(intr_mode, +"bf interrupt mode (default=msix):\n" +" " BF_INTR_MODE_MSIX_NAME " Use MSIX interrupt\n" +" " BF_INTR_MODE_MSI_NAME " Use MSI interrupt\n" +" " BF_INTR_MODE_LEGACY_NAME " Use Legacy interrupt\n" +"\n"); + +MODULE_DEVICE_TABLE(pci, bf_pci_tbl); +MODULE_DESCRIPTION("Barefoot Tofino PCI device"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Barefoot Networks"); diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/bf_tun.c b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/bf_tun.c new file mode 100644 index 000000000000..a1ba7047baaa --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/bf_tun.c @@ -0,0 +1,2396 @@ +/* + * TUN - Universal TUN/TAP device driver. + * Copyright (C) 1999-2002 Maxim Krasnyansky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * $Id: tun.c,v 1.15 2002/03/01 02:44:24 maxk Exp $ + */ + +/* + * Changes: + * + * Mike Kershaw 2005/08/14 + * Add TUNSETLINK ioctl to set the link encapsulation + * + * Mark Smith + * Use eth_random_addr() for tap MAC address. + * + * Harald Roelle 2004/04/20 + * Fixes in packet dropping, queue length setting and queue wakeup. + * Increased default tx queue length. + * Added ethtool API. + * Minor cleanups + * + * Daniel Podlejski + * Modifications for 2.3.99-pre5 kernel. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "bf_tun" +#define DRV_VERSION "1.6" +#define DRV_DESCRIPTION "Universal TUN/TAP device driver" +#define DRV_COPYRIGHT "(C) 1999-2004 Max Krasnyansky " + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* Uncomment to enable debugging */ +/* #define TUN_DEBUG 1 */ + +#define TUN_MINOR1 201 + +#ifdef TUN_DEBUG +static int debug; + +#define tun_debug(level, tun, fmt, args...) \ +do { \ + if (tun->debug) \ + netdev_printk(level, tun->dev, fmt, ##args); \ +} while (0) +#define DBG1(level, fmt, args...) \ +do { \ + if (debug == 2) \ + printk(level fmt, ##args); \ +} while (0) +#else +#define tun_debug(level, tun, fmt, args...) \ +do { \ + if (0) \ + netdev_printk(level, tun->dev, fmt, ##args); \ +} while (0) +#define DBG1(level, fmt, args...) \ +do { \ + if (0) \ + printk(level fmt, ##args); \ +} while (0) +#endif + +#define GOODCOPY_LEN 128 + +#define FLT_EXACT_COUNT 8 +struct tap_filter { + unsigned int count; /* Number of addrs. Zero means disabled */ + u32 mask[2]; /* Mask of the hashed addrs */ + unsigned char addr[FLT_EXACT_COUNT][ETH_ALEN]; +}; + +/* DEFAULT_MAX_NUM_RSS_QUEUES were chosen to let the rx/tx queues allocated for + * the netdevice to be fit in one page. So we can make sure the success of + * memory allocation. TODO: increase the limit. */ +#define MAX_TAP_QUEUES DEFAULT_MAX_NUM_RSS_QUEUES +#define MAX_TAP_FLOWS 4096 + +#define TUN_FLOW_EXPIRE (3 * HZ) + +/* A tun_file connects an open character device to a tuntap netdevice. It + * also contains all socket related structures (except sock_fprog and tap_filter) + * to serve as one transmit queue for tuntap device. The sock_fprog and + * tap_filter were kept in tun_struct since they were used for filtering for the + * netdevice not for a specific queue (at least I didn't see the requirement for + * this). + * + * RCU usage: + * The tun_file and tun_struct are loosely coupled, the pointer from one to the + * other can only be read while rcu_read_lock or rtnl_lock is held. + */ +struct tun_file { + struct sock sk; + struct socket socket; + struct socket_wq wq; + struct tun_struct __rcu *tun; + struct net *net; + struct fasync_struct *fasync; + /* only used for fasnyc */ + unsigned int flags; + union { + u16 queue_index; + unsigned int ifindex; + }; + struct list_head next; + struct tun_struct *detached; +}; + +struct tun_flow_entry { + struct hlist_node hash_link; + struct rcu_head rcu; + struct tun_struct *tun; + + u32 rxhash; + u32 rps_rxhash; + int queue_index; + unsigned long updated; +}; + +#define TUN_NUM_FLOW_ENTRIES 1024 + +/* Since the socket were moved to tun_file, to preserve the behavior of persist + * device, socket filter, sndbuf and vnet header size were restore when the + * file were attached to a persist device. + */ +struct tun_struct { + struct tun_file __rcu *tfiles[MAX_TAP_QUEUES]; + unsigned int numqueues; + unsigned int flags; + kuid_t owner; + kgid_t group; + + struct net_device *dev; + netdev_features_t set_features; +#define TUN_USER_FEATURES (NETIF_F_HW_CSUM|NETIF_F_TSO_ECN|NETIF_F_TSO| \ + NETIF_F_TSO6|NETIF_F_UFO) + + int vnet_hdr_sz; + int sndbuf; + struct tap_filter txflt; + struct sock_fprog fprog; + /* protected by rtnl lock */ + bool filter_attached; +#ifdef TUN_DEBUG + int debug; +#endif + spinlock_t lock; + struct hlist_head flows[TUN_NUM_FLOW_ENTRIES]; + struct timer_list flow_gc_timer; + unsigned long ageing_time; + unsigned int numdisabled; + struct list_head disabled; + void *security; + u32 flow_count; +}; + +static inline u32 tun_hashfn(u32 rxhash) +{ + return rxhash & 0x3ff; +} + +static struct tun_flow_entry *tun_flow_find(struct hlist_head *head, u32 rxhash) +{ + struct tun_flow_entry *e; + + hlist_for_each_entry_rcu(e, head, hash_link) { + if (e->rxhash == rxhash) + return e; + } + return NULL; +} + +static struct tun_flow_entry *tun_flow_create(struct tun_struct *tun, + struct hlist_head *head, + u32 rxhash, u16 queue_index) +{ + struct tun_flow_entry *e = kmalloc(sizeof(*e), GFP_ATOMIC); + + if (e) { + tun_debug(KERN_INFO, tun, "create flow: hash %u index %u\n", + rxhash, queue_index); + e->updated = jiffies; + e->rxhash = rxhash; + e->rps_rxhash = 0; + e->queue_index = queue_index; + e->tun = tun; + hlist_add_head_rcu(&e->hash_link, head); + ++tun->flow_count; + } + return e; +} + +static void tun_flow_delete(struct tun_struct *tun, struct tun_flow_entry *e) +{ + tun_debug(KERN_INFO, tun, "delete flow: hash %u index %u\n", + e->rxhash, e->queue_index); + sock_rps_reset_flow_hash(e->rps_rxhash); + hlist_del_rcu(&e->hash_link); + kfree_rcu(e, rcu); + --tun->flow_count; +} + +static void tun_flow_flush(struct tun_struct *tun) +{ + int i; + + spin_lock_bh(&tun->lock); + for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) { + struct tun_flow_entry *e; + struct hlist_node *n; + + hlist_for_each_entry_safe(e, n, &tun->flows[i], hash_link) + tun_flow_delete(tun, e); + } + spin_unlock_bh(&tun->lock); +} + +static void tun_flow_delete_by_queue(struct tun_struct *tun, u16 queue_index) +{ + int i; + + spin_lock_bh(&tun->lock); + for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) { + struct tun_flow_entry *e; + struct hlist_node *n; + + hlist_for_each_entry_safe(e, n, &tun->flows[i], hash_link) { + if (e->queue_index == queue_index) + tun_flow_delete(tun, e); + } + } + spin_unlock_bh(&tun->lock); +} + +static void tun_flow_cleanup(unsigned long data) +{ + struct tun_struct *tun = (struct tun_struct *)data; + unsigned long delay = tun->ageing_time; + unsigned long next_timer = jiffies + delay; + unsigned long count = 0; + int i; + + tun_debug(KERN_INFO, tun, "tun_flow_cleanup\n"); + + spin_lock_bh(&tun->lock); + for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) { + struct tun_flow_entry *e; + struct hlist_node *n; + + hlist_for_each_entry_safe(e, n, &tun->flows[i], hash_link) { + unsigned long this_timer; + count++; + this_timer = e->updated + delay; + if (time_before_eq(this_timer, jiffies)) + tun_flow_delete(tun, e); + else if (time_before(this_timer, next_timer)) + next_timer = this_timer; + } + } + + if (count) + mod_timer(&tun->flow_gc_timer, round_jiffies_up(next_timer)); + spin_unlock_bh(&tun->lock); +} + +static void tun_flow_update(struct tun_struct *tun, u32 rxhash, + struct tun_file *tfile) +{ + struct hlist_head *head; + struct tun_flow_entry *e; + unsigned long delay = tun->ageing_time; + u16 queue_index = tfile->queue_index; + + if (!rxhash) + return; + else + head = &tun->flows[tun_hashfn(rxhash)]; + + rcu_read_lock(); + + /* We may get a very small possibility of OOO during switching, not + * worth to optimize.*/ + if (tun->numqueues == 1 || tfile->detached) + goto unlock; + + e = tun_flow_find(head, rxhash); + if (likely(e)) { + /* TODO: keep queueing to old queue until it's empty? */ + e->queue_index = queue_index; + e->updated = jiffies; + sock_rps_record_flow_hash(e->rps_rxhash); + } else { + spin_lock_bh(&tun->lock); + if (!tun_flow_find(head, rxhash) && + tun->flow_count < MAX_TAP_FLOWS) + tun_flow_create(tun, head, rxhash, queue_index); + + if (!timer_pending(&tun->flow_gc_timer)) + mod_timer(&tun->flow_gc_timer, + round_jiffies_up(jiffies + delay)); + spin_unlock_bh(&tun->lock); + } + +unlock: + rcu_read_unlock(); +} + +/** + * Save the hash received in the stack receive path and update the + * flow_hash table accordingly. + */ +static inline void tun_flow_save_rps_rxhash(struct tun_flow_entry *e, u32 hash) +{ + if (unlikely(e->rps_rxhash != hash)) { + sock_rps_reset_flow_hash(e->rps_rxhash); + e->rps_rxhash = hash; + } +} + +/* We try to identify a flow through its rxhash first. The reason that + * we do not check rxq no. is because some cards(e.g 82599), chooses + * the rxq based on the txq where the last packet of the flow comes. As + * the userspace application move between processors, we may get a + * different rxq no. here. If we could not get rxhash, then we would + * hope the rxq no. may help here. + */ +static u16 tun_select_queue(struct net_device *dev, struct sk_buff *skb, + void *accel_priv, select_queue_fallback_t fallback) +{ + struct tun_struct *tun = netdev_priv(dev); + struct tun_flow_entry *e; + u32 txq = 0; + u32 numqueues = 0; + + rcu_read_lock(); + numqueues = ACCESS_ONCE(tun->numqueues); + + txq = skb_get_hash(skb); + if (txq) { + e = tun_flow_find(&tun->flows[tun_hashfn(txq)], txq); + if (e) { + tun_flow_save_rps_rxhash(e, txq); + txq = e->queue_index; + } else + /* use multiply and shift instead of expensive divide */ + txq = ((u64)txq * numqueues) >> 32; + } else if (likely(skb_rx_queue_recorded(skb))) { + txq = skb_get_rx_queue(skb); + while (unlikely(txq >= numqueues)) + txq -= numqueues; + } + + rcu_read_unlock(); + return txq; +} + +static inline bool tun_not_capable(struct tun_struct *tun) +{ + const struct cred *cred = current_cred(); + struct net *net = dev_net(tun->dev); + + return ((uid_valid(tun->owner) && !uid_eq(cred->euid, tun->owner)) || + (gid_valid(tun->group) && !in_egroup_p(tun->group))) && + !ns_capable(net->user_ns, CAP_NET_ADMIN); +} + +static void tun_set_real_num_queues(struct tun_struct *tun) +{ + netif_set_real_num_tx_queues(tun->dev, tun->numqueues); + netif_set_real_num_rx_queues(tun->dev, tun->numqueues); +} + +static void tun_disable_queue(struct tun_struct *tun, struct tun_file *tfile) +{ + tfile->detached = tun; + list_add_tail(&tfile->next, &tun->disabled); + ++tun->numdisabled; +} + +static struct tun_struct *tun_enable_queue(struct tun_file *tfile) +{ + struct tun_struct *tun = tfile->detached; + + tfile->detached = NULL; + list_del_init(&tfile->next); + --tun->numdisabled; + return tun; +} + +static void tun_queue_purge(struct tun_file *tfile) +{ + skb_queue_purge(&tfile->sk.sk_receive_queue); + skb_queue_purge(&tfile->sk.sk_error_queue); +} + +static void __tun_detach(struct tun_file *tfile, bool clean) +{ + struct tun_file *ntfile; + struct tun_struct *tun; + + tun = rtnl_dereference(tfile->tun); + + if (tun && !tfile->detached) { + u16 index = tfile->queue_index; + BUG_ON(index >= tun->numqueues); + + rcu_assign_pointer(tun->tfiles[index], + tun->tfiles[tun->numqueues - 1]); + ntfile = rtnl_dereference(tun->tfiles[index]); + ntfile->queue_index = index; + + --tun->numqueues; + if (clean) { + RCU_INIT_POINTER(tfile->tun, NULL); + sock_put(&tfile->sk); + } else + tun_disable_queue(tun, tfile); + + synchronize_net(); + tun_flow_delete_by_queue(tun, tun->numqueues + 1); + /* Drop read queue */ + tun_queue_purge(tfile); + tun_set_real_num_queues(tun); + } else if (tfile->detached && clean) { + tun = tun_enable_queue(tfile); + sock_put(&tfile->sk); + } + + if (clean) { + if (tun && tun->numqueues == 0 && tun->numdisabled == 0) { + netif_carrier_off(tun->dev); + + if (!(tun->flags & TUN_PERSIST) && + tun->dev->reg_state == NETREG_REGISTERED) + unregister_netdevice(tun->dev); + } + + BUG_ON(!test_bit(SOCK_EXTERNALLY_ALLOCATED, + &tfile->socket.flags)); + sk_release_kernel(&tfile->sk); + } +} + +static void tun_detach(struct tun_file *tfile, bool clean) +{ + rtnl_lock(); + __tun_detach(tfile, clean); + rtnl_unlock(); +} + +static void tun_detach_all(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + struct tun_file *tfile, *tmp; + int i, n = tun->numqueues; + + for (i = 0; i < n; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + BUG_ON(!tfile); + tfile->socket.sk->sk_data_ready(tfile->socket.sk); + RCU_INIT_POINTER(tfile->tun, NULL); + --tun->numqueues; + } + list_for_each_entry(tfile, &tun->disabled, next) { + tfile->socket.sk->sk_data_ready(tfile->socket.sk); + RCU_INIT_POINTER(tfile->tun, NULL); + } + BUG_ON(tun->numqueues != 0); + + synchronize_net(); + for (i = 0; i < n; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + /* Drop read queue */ + tun_queue_purge(tfile); + sock_put(&tfile->sk); + } + list_for_each_entry_safe(tfile, tmp, &tun->disabled, next) { + tun_enable_queue(tfile); + tun_queue_purge(tfile); + sock_put(&tfile->sk); + } + BUG_ON(tun->numdisabled != 0); + + if (tun->flags & TUN_PERSIST) + module_put(THIS_MODULE); +} + +static int tun_attach(struct tun_struct *tun, struct file *file, bool skip_filter) +{ + struct tun_file *tfile = file->private_data; + int err; + + err = security_tun_dev_attach(tfile->socket.sk, tun->security); + if (err < 0) + goto out; + + err = -EINVAL; + if (rtnl_dereference(tfile->tun) && !tfile->detached) + goto out; + + err = -EBUSY; + if (!(tun->flags & TUN_TAP_MQ) && tun->numqueues == 1) + goto out; + + err = -E2BIG; + if (!tfile->detached && + tun->numqueues + tun->numdisabled == MAX_TAP_QUEUES) + goto out; + + err = 0; + + /* Re-attach the filter to persist device */ + if (!skip_filter && (tun->filter_attached == true)) { + err = __sk_attach_filter(&tun->fprog, tfile->socket.sk, + lockdep_rtnl_is_held()); + if (!err) + goto out; + } + tfile->queue_index = tun->numqueues; + rcu_assign_pointer(tfile->tun, tun); + rcu_assign_pointer(tun->tfiles[tun->numqueues], tfile); + tun->numqueues++; + + if (tfile->detached) + tun_enable_queue(tfile); + else + sock_hold(&tfile->sk); + + tun_set_real_num_queues(tun); + + /* device is allowed to go away first, so no need to hold extra + * refcnt. + */ + +out: + return err; +} + +static struct tun_struct *__tun_get(struct tun_file *tfile) +{ + struct tun_struct *tun; + + rcu_read_lock(); + tun = rcu_dereference(tfile->tun); + if (tun) + dev_hold(tun->dev); + rcu_read_unlock(); + + return tun; +} + +static struct tun_struct *tun_get(struct file *file) +{ + return __tun_get(file->private_data); +} + +static void tun_put(struct tun_struct *tun) +{ + dev_put(tun->dev); +} + +/* TAP filtering */ +static void addr_hash_set(u32 *mask, const u8 *addr) +{ + int n = ether_crc(ETH_ALEN, addr) >> 26; + mask[n >> 5] |= (1 << (n & 31)); +} + +static unsigned int addr_hash_test(const u32 *mask, const u8 *addr) +{ + int n = ether_crc(ETH_ALEN, addr) >> 26; + return mask[n >> 5] & (1 << (n & 31)); +} + +static int update_filter(struct tap_filter *filter, void __user *arg) +{ + struct { u8 u[ETH_ALEN]; } *addr; + struct tun_filter uf; + int err, alen, n, nexact; + + if (copy_from_user(&uf, arg, sizeof(uf))) + return -EFAULT; + + if (!uf.count) { + /* Disabled */ + filter->count = 0; + return 0; + } + + alen = ETH_ALEN * uf.count; + addr = kmalloc(alen, GFP_KERNEL); + if (!addr) + return -ENOMEM; + + if (copy_from_user(addr, arg + sizeof(uf), alen)) { + err = -EFAULT; + goto done; + } + + /* The filter is updated without holding any locks. Which is + * perfectly safe. We disable it first and in the worst + * case we'll accept a few undesired packets. */ + filter->count = 0; + wmb(); + + /* Use first set of addresses as an exact filter */ + for (n = 0; n < uf.count && n < FLT_EXACT_COUNT; n++) + memcpy(filter->addr[n], addr[n].u, ETH_ALEN); + + nexact = n; + + /* Remaining multicast addresses are hashed, + * unicast will leave the filter disabled. */ + memset(filter->mask, 0, sizeof(filter->mask)); + for (; n < uf.count; n++) { + if (!is_multicast_ether_addr(addr[n].u)) { + err = 0; /* no filter */ + goto done; + } + addr_hash_set(filter->mask, addr[n].u); + } + + /* For ALLMULTI just set the mask to all ones. + * This overrides the mask populated above. */ + if ((uf.flags & TUN_FLT_ALLMULTI)) + memset(filter->mask, ~0, sizeof(filter->mask)); + + /* Now enable the filter */ + wmb(); + filter->count = nexact; + + /* Return the number of exact filters */ + err = nexact; + +done: + kfree(addr); + return err; +} + +/* Returns: 0 - drop, !=0 - accept */ +static int run_filter(struct tap_filter *filter, const struct sk_buff *skb) +{ + /* Cannot use eth_hdr(skb) here because skb_mac_hdr() is incorrect + * at this point. */ + struct ethhdr *eh = (struct ethhdr *) skb->data; + int i; + + /* Exact match */ + for (i = 0; i < filter->count; i++) + if (ether_addr_equal(eh->h_dest, filter->addr[i])) + return 1; + + /* Inexact match (multicast only) */ + if (is_multicast_ether_addr(eh->h_dest)) + return addr_hash_test(filter->mask, eh->h_dest); + + return 0; +} + +/* + * Checks whether the packet is accepted or not. + * Returns: 0 - drop, !=0 - accept + */ +static int check_filter(struct tap_filter *filter, const struct sk_buff *skb) +{ + if (!filter->count) + return 1; + + return run_filter(filter, skb); +} + +/* Network device part of the driver */ + +static const struct ethtool_ops tun_ethtool_ops; + +/* Net device detach from fd. */ +static void tun_net_uninit(struct net_device *dev) +{ + tun_detach_all(dev); +} + +/* Net device open. */ +static int tun_net_open(struct net_device *dev) +{ + netif_tx_start_all_queues(dev); + return 0; +} + +/* Net device close. */ +static int tun_net_close(struct net_device *dev) +{ + netif_tx_stop_all_queues(dev); + return 0; +} + +/* Net device start xmit */ +static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + int txq = skb->queue_mapping; + struct tun_file *tfile; + u32 numqueues = 0; + + rcu_read_lock(); + tfile = rcu_dereference(tun->tfiles[txq]); + numqueues = ACCESS_ONCE(tun->numqueues); + + /* Drop packet if interface is not attached */ + if (txq >= numqueues) + goto drop; + + if (numqueues == 1) { + /* Select queue was not called for the skbuff, so we extract the + * RPS hash and save it into the flow_table here. + */ + __u32 rxhash; + + rxhash = skb_get_hash(skb); + if (rxhash) { + struct tun_flow_entry *e; + e = tun_flow_find(&tun->flows[tun_hashfn(rxhash)], + rxhash); + if (e) + tun_flow_save_rps_rxhash(e, rxhash); + } + } + + tun_debug(KERN_INFO, tun, "tun_net_xmit %d\n", skb->len); + + BUG_ON(!tfile); + + /* Drop if the filter does not like it. + * This is a noop if the filter is disabled. + * Filter can be enabled only for the TAP devices. */ + if (!check_filter(&tun->txflt, skb)) + goto drop; + + if (tfile->socket.sk->sk_filter && + sk_filter(tfile->socket.sk, skb)) + goto drop; + + /* Limit the number of packets queued by dividing txq length with the + * number of queues. + */ + if (skb_queue_len(&tfile->socket.sk->sk_receive_queue) * numqueues + >= dev->tx_queue_len) + goto drop; + + if (unlikely(skb_orphan_frags(skb, GFP_ATOMIC))) + goto drop; + + if (skb->sk) { + sock_tx_timestamp(skb->sk, &skb_shinfo(skb)->tx_flags); + sw_tx_timestamp(skb); + } + + /* Orphan the skb - required as we might hang on to it + * for indefinite time. + */ + skb_orphan(skb); + + nf_reset(skb); + + /* Enqueue packet */ + skb_queue_tail(&tfile->socket.sk->sk_receive_queue, skb); + + /* Notify and wake up reader process */ + if (tfile->flags & TUN_FASYNC) + kill_fasync(&tfile->fasync, SIGIO, POLL_IN); + tfile->socket.sk->sk_data_ready(tfile->socket.sk); + + rcu_read_unlock(); + return NETDEV_TX_OK; + +drop: + dev->stats.tx_dropped++; + skb_tx_error(skb); + kfree_skb(skb); + rcu_read_unlock(); + return NETDEV_TX_OK; +} + +static void tun_net_mclist(struct net_device *dev) +{ + /* + * This callback is supposed to deal with mc filter in + * _rx_ path and has nothing to do with the _tx_ path. + * In rx path we always accept everything userspace gives us. + */ +} + +#define MIN_MTU 68 +#define MAX_MTU 65535 + +static int +tun_net_change_mtu(struct net_device *dev, int new_mtu) +{ + if (new_mtu < MIN_MTU || new_mtu + dev->hard_header_len > MAX_MTU) + return -EINVAL; + dev->mtu = new_mtu; + return 0; +} + +static netdev_features_t tun_net_fix_features(struct net_device *dev, + netdev_features_t features) +{ + struct tun_struct *tun = netdev_priv(dev); + + return (features & tun->set_features) | (features & ~TUN_USER_FEATURES); +} + +static int +tun_change_carrier(struct net_device *dev, bool new_carrier) { + if (new_carrier) + netif_carrier_on(dev); + else + netif_carrier_off(dev); + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void tun_poll_controller(struct net_device *dev) +{ + /* + * Tun only receives frames when: + * 1) the char device endpoint gets data from user space + * 2) the tun socket gets a sendmsg call from user space + * Since both of those are synchronous operations, we are guaranteed + * never to have pending data when we poll for it + * so there is nothing to do here but return. + * We need this though so netpoll recognizes us as an interface that + * supports polling, which enables bridge devices in virt setups to + * still use netconsole + */ + return; +} +#endif +static const struct net_device_ops tun_netdev_ops = { + .ndo_uninit = tun_net_uninit, + .ndo_open = tun_net_open, + .ndo_stop = tun_net_close, + .ndo_start_xmit = tun_net_xmit, + .ndo_change_mtu = tun_net_change_mtu, + .ndo_fix_features = tun_net_fix_features, + .ndo_select_queue = tun_select_queue, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif +}; + +static const struct net_device_ops tap_netdev_ops = { + .ndo_uninit = tun_net_uninit, + .ndo_open = tun_net_open, + .ndo_stop = tun_net_close, + .ndo_start_xmit = tun_net_xmit, + .ndo_change_mtu = tun_net_change_mtu, + .ndo_fix_features = tun_net_fix_features, + .ndo_set_rx_mode = tun_net_mclist, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_select_queue = tun_select_queue, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = tun_poll_controller, +#endif + .ndo_change_carrier = tun_change_carrier, +}; + +static void tun_flow_init(struct tun_struct *tun) +{ + int i; + + for (i = 0; i < TUN_NUM_FLOW_ENTRIES; i++) + INIT_HLIST_HEAD(&tun->flows[i]); + + tun->ageing_time = TUN_FLOW_EXPIRE; + setup_timer(&tun->flow_gc_timer, tun_flow_cleanup, (unsigned long)tun); + mod_timer(&tun->flow_gc_timer, + round_jiffies_up(jiffies + tun->ageing_time)); +} + +static void tun_flow_uninit(struct tun_struct *tun) +{ + del_timer_sync(&tun->flow_gc_timer); + tun_flow_flush(tun); +} + +/* Initialize net device. */ +static void tun_net_init(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + + switch (tun->flags & TUN_TYPE_MASK) { + case TUN_TUN_DEV: + dev->netdev_ops = &tun_netdev_ops; + + /* Point-to-Point TUN Device */ + dev->hard_header_len = 0; + dev->addr_len = 0; + dev->mtu = 1500; + + /* Zero header length */ + dev->type = ARPHRD_NONE; + dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST; + dev->tx_queue_len = TUN_READQ_SIZE*2; /* We prefer our own queue length */ + break; + + case TUN_TAP_DEV: + dev->netdev_ops = &tap_netdev_ops; + /* Ethernet TAP Device */ + ether_setup(dev); + dev->priv_flags &= ~IFF_TX_SKB_SHARING; + dev->priv_flags |= IFF_LIVE_ADDR_CHANGE; + + eth_hw_addr_random(dev); + + dev->tx_queue_len = TUN_READQ_SIZE*2; /* We prefer our own queue length */ + break; + } +} + +/* Character device part */ + +/* Poll */ +static unsigned int tun_chr_poll(struct file *file, poll_table *wait) +{ + struct tun_file *tfile = file->private_data; + struct tun_struct *tun = __tun_get(tfile); + struct sock *sk; + unsigned int mask = 0; + + if (!tun) + return POLLERR; + + sk = tfile->socket.sk; + + tun_debug(KERN_INFO, tun, "tun_chr_poll\n"); + + poll_wait(file, sk_sleep(sk), wait); + + if (!skb_queue_empty(&sk->sk_receive_queue)) + mask |= POLLIN | POLLRDNORM; + + if (sock_writeable(sk) || + (!test_and_set_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags) && + sock_writeable(sk))) + mask |= POLLOUT | POLLWRNORM; + + if (tun->dev->reg_state != NETREG_REGISTERED) + mask = POLLERR; + + tun_put(tun); + return mask; +} + +/* prepad is the amount to reserve at front. len is length after that. + * linear is a hint as to how much to copy (usually headers). */ +static struct sk_buff *tun_alloc_skb(struct tun_file *tfile, + size_t prepad, size_t len, + size_t linear, int noblock) +{ + struct sock *sk = tfile->socket.sk; + struct sk_buff *skb; + int err; + + /* Under a page? Don't bother with paged skb. */ + if (prepad + len < PAGE_SIZE || !linear) + linear = len; + + skb = sock_alloc_send_pskb(sk, prepad + linear, len - linear, noblock, + &err, 0); + if (!skb) + return ERR_PTR(err); + + skb_reserve(skb, prepad); + skb_put(skb, linear); + skb->data_len = len - linear; + skb->len += len - linear; + + return skb; +} + +/* Get packet from user space buffer */ +static ssize_t tun_get_user(struct tun_struct *tun, struct tun_file *tfile, + void *msg_control, const struct iovec *iv, + size_t total_len, size_t count, int noblock) +{ + struct tun_pi pi = { 0, cpu_to_be16(ETH_P_IP) }; + struct sk_buff *skb; + size_t len = total_len, align = NET_SKB_PAD, linear; + struct virtio_net_hdr gso = { 0 }; + int good_linear; + int offset = 0; + int copylen; + bool zerocopy = false; + int err; + u32 rxhash; + + if (!(tun->flags & TUN_NO_PI)) { + if (len < sizeof(pi)) + return -EINVAL; + len -= sizeof(pi); + + if (memcpy_fromiovecend((void *)&pi, iv, 0, sizeof(pi))) + return -EFAULT; + offset += sizeof(pi); + } + + if (tun->flags & TUN_VNET_HDR) { + if (len < tun->vnet_hdr_sz) + return -EINVAL; + len -= tun->vnet_hdr_sz; + + if (memcpy_fromiovecend((void *)&gso, iv, offset, sizeof(gso))) + return -EFAULT; + + if ((gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) && + gso.csum_start + gso.csum_offset + 2 > gso.hdr_len) + gso.hdr_len = gso.csum_start + gso.csum_offset + 2; + + if (gso.hdr_len > len) + return -EINVAL; + offset += tun->vnet_hdr_sz; + } + + if ((tun->flags & TUN_TYPE_MASK) == TUN_TAP_DEV) { + align += NET_IP_ALIGN; + if (unlikely(len < ETH_HLEN || + (gso.hdr_len && gso.hdr_len < ETH_HLEN))) + return -EINVAL; + } + + good_linear = SKB_MAX_HEAD(align); + + if (msg_control) { + /* There are 256 bytes to be copied in skb, so there is + * enough room for skb expand head in case it is used. + * The rest of the buffer is mapped from userspace. + */ + copylen = gso.hdr_len ? gso.hdr_len : GOODCOPY_LEN; + if (copylen > good_linear) + copylen = good_linear; + linear = copylen; + if (iov_pages(iv, offset + copylen, count) <= MAX_SKB_FRAGS) + zerocopy = true; + } + + if (!zerocopy) { + copylen = len; + if (gso.hdr_len > good_linear) + linear = good_linear; + else + linear = gso.hdr_len; + } + + skb = tun_alloc_skb(tfile, align, copylen, linear, noblock); + if (IS_ERR(skb)) { + if (PTR_ERR(skb) != -EAGAIN) + tun->dev->stats.rx_dropped++; + return PTR_ERR(skb); + } + + if (zerocopy) + err = zerocopy_sg_from_iovec(skb, iv, offset, count); + else { + err = skb_copy_datagram_from_iovec(skb, 0, iv, offset, len); + if (!err && msg_control) { + struct ubuf_info *uarg = msg_control; + uarg->callback(uarg, false); + } + } + + if (err) { + tun->dev->stats.rx_dropped++; + kfree_skb(skb); + return -EFAULT; + } + + if (gso.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) { + if (!skb_partial_csum_set(skb, gso.csum_start, + gso.csum_offset)) { + tun->dev->stats.rx_frame_errors++; + kfree_skb(skb); + return -EINVAL; + } + } + + switch (tun->flags & TUN_TYPE_MASK) { + case TUN_TUN_DEV: + if (tun->flags & TUN_NO_PI) { + switch (skb->data[0] & 0xf0) { + case 0x40: + pi.proto = htons(ETH_P_IP); + break; + case 0x60: + pi.proto = htons(ETH_P_IPV6); + break; + default: + tun->dev->stats.rx_dropped++; + kfree_skb(skb); + return -EINVAL; + } + } + + skb_reset_mac_header(skb); + skb->protocol = pi.proto; + skb->dev = tun->dev; + break; + case TUN_TAP_DEV: + skb->protocol = eth_type_trans(skb, tun->dev); + break; + } + + skb_reset_network_header(skb); + + if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) { + pr_debug("GSO!\n"); + switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { + case VIRTIO_NET_HDR_GSO_TCPV4: + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; + break; + case VIRTIO_NET_HDR_GSO_TCPV6: + skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6; + break; + case VIRTIO_NET_HDR_GSO_UDP: + skb_shinfo(skb)->gso_type = SKB_GSO_UDP; + if (skb->protocol == htons(ETH_P_IPV6)) + ipv6_proxy_select_ident(skb); + break; + default: + tun->dev->stats.rx_frame_errors++; + kfree_skb(skb); + return -EINVAL; + } + + if (gso.gso_type & VIRTIO_NET_HDR_GSO_ECN) + skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN; + + skb_shinfo(skb)->gso_size = gso.gso_size; + if (skb_shinfo(skb)->gso_size == 0) { + tun->dev->stats.rx_frame_errors++; + kfree_skb(skb); + return -EINVAL; + } + + /* Header must be checked, and gso_segs computed. */ + skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY; + skb_shinfo(skb)->gso_segs = 0; + } + + /* copy skb_ubuf_info for callback when skb has no error */ + if (zerocopy) { + skb_shinfo(skb)->destructor_arg = msg_control; + skb_shinfo(skb)->tx_flags |= SKBTX_DEV_ZEROCOPY; + skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG; + } + + skb_probe_transport_header(skb, 0); + + rxhash = skb_get_hash(skb); + netif_rx_ni(skb); + + tun->dev->stats.rx_packets++; + tun->dev->stats.rx_bytes += len; + + tun_flow_update(tun, rxhash, tfile); + return total_len; +} + +static ssize_t tun_chr_aio_write(struct kiocb *iocb, const struct iovec *iv, + unsigned long count, loff_t pos) +{ + struct file *file = iocb->ki_filp; + struct tun_struct *tun = tun_get(file); + struct tun_file *tfile = file->private_data; + ssize_t result; + + if (!tun) + return -EBADFD; + + tun_debug(KERN_INFO, tun, "tun_chr_write %ld\n", count); + + result = tun_get_user(tun, tfile, NULL, iv, iov_length(iv, count), + count, file->f_flags & O_NONBLOCK); + + tun_put(tun); + return result; +} + +/* Put packet to the user space buffer */ +static ssize_t tun_put_user(struct tun_struct *tun, + struct tun_file *tfile, + struct sk_buff *skb, + const struct iovec *iv, int len) +{ + struct tun_pi pi = { 0, skb->protocol }; + ssize_t total = 0; + int vlan_offset = 0, copied; + int vlan_hlen = 0; + + if (vlan_tx_tag_present(skb)) + vlan_hlen = VLAN_HLEN; + + if (!(tun->flags & TUN_NO_PI)) { + if ((len -= sizeof(pi)) < 0) + return -EINVAL; + + if (len < skb->len) { + /* Packet will be striped */ + pi.flags |= TUN_PKT_STRIP; + } + + if (memcpy_toiovecend(iv, (void *) &pi, 0, sizeof(pi))) + return -EFAULT; + total += sizeof(pi); + } + + if (tun->flags & TUN_VNET_HDR) { + struct virtio_net_hdr gso = { 0 }; /* no info leak */ + if ((len -= tun->vnet_hdr_sz) < 0) + return -EINVAL; + + if (skb_is_gso(skb)) { + struct skb_shared_info *sinfo = skb_shinfo(skb); + + /* This is a hint as to how much should be linear. */ + gso.hdr_len = skb_headlen(skb); + gso.gso_size = sinfo->gso_size; + if (sinfo->gso_type & SKB_GSO_TCPV4) + gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; + else if (sinfo->gso_type & SKB_GSO_TCPV6) + gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; + else if (sinfo->gso_type & SKB_GSO_UDP) + gso.gso_type = VIRTIO_NET_HDR_GSO_UDP; + else { + pr_err("unexpected GSO type: " + "0x%x, gso_size %d, hdr_len %d\n", + sinfo->gso_type, gso.gso_size, + gso.hdr_len); + print_hex_dump(KERN_ERR, "tun: ", + DUMP_PREFIX_NONE, + 16, 1, skb->head, + min((int)gso.hdr_len, 64), true); + WARN_ON_ONCE(1); + return -EINVAL; + } + if (sinfo->gso_type & SKB_GSO_TCP_ECN) + gso.gso_type |= VIRTIO_NET_HDR_GSO_ECN; + } else + gso.gso_type = VIRTIO_NET_HDR_GSO_NONE; + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + gso.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM; + gso.csum_start = skb_checksum_start_offset(skb) + + vlan_hlen; + gso.csum_offset = skb->csum_offset; + } else if (skb->ip_summed == CHECKSUM_UNNECESSARY) { + gso.flags = VIRTIO_NET_HDR_F_DATA_VALID; + } /* else everything is zero */ + + if (unlikely(memcpy_toiovecend(iv, (void *)&gso, total, + sizeof(gso)))) + return -EFAULT; + total += tun->vnet_hdr_sz; + } + + copied = total; + len = min_t(int, skb->len + vlan_hlen, len); + total += skb->len + vlan_hlen; + if (vlan_hlen) { + int copy, ret; + struct { + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + } veth; + + veth.h_vlan_proto = skb->vlan_proto; + veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb)); + + vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto); + + copy = min_t(int, vlan_offset, len); + ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy); + len -= copy; + copied += copy; + if (ret || !len) + goto done; + + copy = min_t(int, sizeof(veth), len); + ret = memcpy_toiovecend(iv, (void *)&veth, copied, copy); + len -= copy; + copied += copy; + if (ret || !len) + goto done; + } + + skb_copy_datagram_const_iovec(skb, vlan_offset, iv, copied, len); + +done: + tun->dev->stats.tx_packets++; + tun->dev->stats.tx_bytes += len; + + return total; +} + +static ssize_t tun_do_read(struct tun_struct *tun, struct tun_file *tfile, + const struct iovec *iv, ssize_t len, int noblock) +{ + struct sk_buff *skb; + ssize_t ret = 0; + int peeked, err, off = 0; + + tun_debug(KERN_INFO, tun, "tun_do_read\n"); + + if (!len) + return ret; + + if (tun->dev->reg_state != NETREG_REGISTERED) + return -EIO; + + /* Read frames from queue */ + skb = __skb_recv_datagram(tfile->socket.sk, noblock ? MSG_DONTWAIT : 0, + &peeked, &off, &err); + if (skb) { + ret = tun_put_user(tun, tfile, skb, iv, len); + kfree_skb(skb); + } else + ret = err; + + return ret; +} + +static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv, + unsigned long count, loff_t pos) +{ + struct file *file = iocb->ki_filp; + struct tun_file *tfile = file->private_data; + struct tun_struct *tun = __tun_get(tfile); + ssize_t len, ret; + + if (!tun) + return -EBADFD; + len = iov_length(iv, count); + if (len < 0) { + ret = -EINVAL; + goto out; + } + + ret = tun_do_read(tun, tfile, iv, len, + file->f_flags & O_NONBLOCK); + ret = min_t(ssize_t, ret, len); + if (ret > 0) + iocb->ki_pos = ret; +out: + tun_put(tun); + return ret; +} + +static void tun_free_netdev(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + + BUG_ON(!(list_empty(&tun->disabled))); + tun_flow_uninit(tun); + security_tun_dev_free_security(tun->security); + free_netdev(dev); +} + +static void tun_setup(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + + tun->owner = INVALID_UID; + tun->group = INVALID_GID; + + dev->ethtool_ops = &tun_ethtool_ops; + dev->destructor = tun_free_netdev; +} + +/* Trivial set of netlink ops to allow deleting tun or tap + * device with netlink. + */ +static int tun_validate(struct nlattr *tb[], struct nlattr *data[]) +{ + return -EINVAL; +} + +static struct rtnl_link_ops tun_link_ops __read_mostly = { + .kind = DRV_NAME, + .priv_size = sizeof(struct tun_struct), + .setup = tun_setup, + .validate = tun_validate, +}; + +static void tun_sock_write_space(struct sock *sk) +{ + struct tun_file *tfile; + wait_queue_head_t *wqueue; + + if (!sock_writeable(sk)) + return; + + if (!test_and_clear_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags)) + return; + + wqueue = sk_sleep(sk); + if (wqueue && waitqueue_active(wqueue)) + wake_up_interruptible_sync_poll(wqueue, POLLOUT | + POLLWRNORM | POLLWRBAND); + + tfile = container_of(sk, struct tun_file, sk); + kill_fasync(&tfile->fasync, SIGIO, POLL_OUT); +} + +static int tun_sendmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *m, size_t total_len) +{ + int ret; + struct tun_file *tfile = container_of(sock, struct tun_file, socket); + struct tun_struct *tun = __tun_get(tfile); + + if (!tun) + return -EBADFD; + ret = tun_get_user(tun, tfile, m->msg_control, m->msg_iov, total_len, + m->msg_iovlen, m->msg_flags & MSG_DONTWAIT); + tun_put(tun); + return ret; +} + +static int tun_recvmsg(struct kiocb *iocb, struct socket *sock, + struct msghdr *m, size_t total_len, + int flags) +{ + struct tun_file *tfile = container_of(sock, struct tun_file, socket); + struct tun_struct *tun = __tun_get(tfile); + int ret; + + if (!tun) + return -EBADFD; + + if (flags & ~(MSG_DONTWAIT|MSG_TRUNC|MSG_ERRQUEUE)) { + ret = -EINVAL; + goto out; + } + if (flags & MSG_ERRQUEUE) { + ret = sock_recv_errqueue(sock->sk, m, total_len, + SOL_PACKET, TUN_TX_TIMESTAMP); + goto out; + } + ret = tun_do_read(tun, tfile, m->msg_iov, total_len, + flags & MSG_DONTWAIT); + if (ret > total_len) { + m->msg_flags |= MSG_TRUNC; + ret = flags & MSG_TRUNC ? ret : total_len; + } +out: + tun_put(tun); + return ret; +} + +static int tun_release(struct socket *sock) +{ + if (sock->sk) + sock_put(sock->sk); + return 0; +} + +/* Ops structure to mimic raw sockets with tun */ +static const struct proto_ops tun_socket_ops = { + .sendmsg = tun_sendmsg, + .recvmsg = tun_recvmsg, + .release = tun_release, +}; + +static struct proto tun_proto = { + .name = "bf_tun", + .owner = THIS_MODULE, + .obj_size = sizeof(struct tun_file), +}; + +static int tun_flags(struct tun_struct *tun) +{ + int flags = 0; + + if (tun->flags & TUN_TUN_DEV) + flags |= IFF_TUN; + else + flags |= IFF_TAP; + + if (tun->flags & TUN_NO_PI) + flags |= IFF_NO_PI; + + /* This flag has no real effect. We track the value for backwards + * compatibility. + */ + if (tun->flags & TUN_ONE_QUEUE) + flags |= IFF_ONE_QUEUE; + + if (tun->flags & TUN_VNET_HDR) + flags |= IFF_VNET_HDR; + + if (tun->flags & TUN_TAP_MQ) + flags |= IFF_MULTI_QUEUE; + + if (tun->flags & TUN_PERSIST) + flags |= IFF_PERSIST; + + return flags; +} + +static ssize_t tun_show_flags(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct tun_struct *tun = netdev_priv(to_net_dev(dev)); + return sprintf(buf, "0x%x\n", tun_flags(tun)); +} + +static ssize_t tun_show_owner(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct tun_struct *tun = netdev_priv(to_net_dev(dev)); + return uid_valid(tun->owner)? + sprintf(buf, "%u\n", + from_kuid_munged(current_user_ns(), tun->owner)): + sprintf(buf, "-1\n"); +} + +static ssize_t tun_show_group(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct tun_struct *tun = netdev_priv(to_net_dev(dev)); + return gid_valid(tun->group) ? + sprintf(buf, "%u\n", + from_kgid_munged(current_user_ns(), tun->group)): + sprintf(buf, "-1\n"); +} + +static DEVICE_ATTR(tun_flags, 0444, tun_show_flags, NULL); +static DEVICE_ATTR(owner, 0444, tun_show_owner, NULL); +static DEVICE_ATTR(group, 0444, tun_show_group, NULL); + +static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) +{ + struct tun_struct *tun; + struct tun_file *tfile = file->private_data; + struct net_device *dev; + int err; + + if (tfile->detached) + return -EINVAL; + + dev = __dev_get_by_name(net, ifr->ifr_name); + if (dev) { + if (ifr->ifr_flags & IFF_TUN_EXCL) + return -EBUSY; + if ((ifr->ifr_flags & IFF_TUN) && dev->netdev_ops == &tun_netdev_ops) + tun = netdev_priv(dev); + else if ((ifr->ifr_flags & IFF_TAP) && dev->netdev_ops == &tap_netdev_ops) + tun = netdev_priv(dev); + else + return -EINVAL; + + if (!!(ifr->ifr_flags & IFF_MULTI_QUEUE) != + !!(tun->flags & TUN_TAP_MQ)) + return -EINVAL; + + if (tun_not_capable(tun)) + return -EPERM; + err = security_tun_dev_open(tun->security); + if (err < 0) + return err; + + err = tun_attach(tun, file, ifr->ifr_flags & IFF_NOFILTER); + if (err < 0) + return err; + + if (tun->flags & TUN_TAP_MQ && + (tun->numqueues + tun->numdisabled > 1)) { + /* One or more queue has already been attached, no need + * to initialize the device again. + */ + return 0; + } + } + else { + char *name; + unsigned long flags = 0; + int queues = ifr->ifr_flags & IFF_MULTI_QUEUE ? + MAX_TAP_QUEUES : 1; + + if (!ns_capable(net->user_ns, CAP_NET_ADMIN)) + return -EPERM; + err = security_tun_dev_create(); + if (err < 0) + return err; + + /* Set dev type */ + if (ifr->ifr_flags & IFF_TUN) { + /* TUN device */ + flags |= TUN_TUN_DEV; + name = "tun%d"; + } else if (ifr->ifr_flags & IFF_TAP) { + /* TAP device */ + flags |= TUN_TAP_DEV; + name = "tap%d"; + } else + return -EINVAL; + + if (*ifr->ifr_name) + name = ifr->ifr_name; + + dev = alloc_netdev_mqs(sizeof(struct tun_struct), name, + tun_setup, queues, queues); + + if (!dev) + return -ENOMEM; + + dev_net_set(dev, net); + dev->rtnl_link_ops = &tun_link_ops; + dev->ifindex = tfile->ifindex; + + tun = netdev_priv(dev); + tun->dev = dev; + tun->flags = flags; + tun->txflt.count = 0; + tun->vnet_hdr_sz = sizeof(struct virtio_net_hdr); + + tun->filter_attached = false; + tun->sndbuf = tfile->socket.sk->sk_sndbuf; + + spin_lock_init(&tun->lock); + + err = security_tun_dev_alloc_security(&tun->security); + if (err < 0) + goto err_free_dev; + + tun_net_init(dev); + tun_flow_init(tun); + + dev->hw_features = NETIF_F_SG | NETIF_F_FRAGLIST | + TUN_USER_FEATURES | NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_STAG_TX; + dev->features = dev->hw_features; + dev->vlan_features = dev->features & + ~(NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_STAG_TX); + + INIT_LIST_HEAD(&tun->disabled); + err = tun_attach(tun, file, false); + if (err < 0) + goto err_free_flow; + + err = register_netdevice(tun->dev); + if (err < 0) + goto err_detach; + + if (device_create_file(&tun->dev->dev, &dev_attr_tun_flags) || + device_create_file(&tun->dev->dev, &dev_attr_owner) || + device_create_file(&tun->dev->dev, &dev_attr_group)) + pr_err("Failed to create tun sysfs files\n"); + } + + netif_carrier_on(tun->dev); + + tun_debug(KERN_INFO, tun, "tun_set_iff\n"); + + if (ifr->ifr_flags & IFF_NO_PI) + tun->flags |= TUN_NO_PI; + else + tun->flags &= ~TUN_NO_PI; + + /* This flag has no real effect. We track the value for backwards + * compatibility. + */ + if (ifr->ifr_flags & IFF_ONE_QUEUE) + tun->flags |= TUN_ONE_QUEUE; + else + tun->flags &= ~TUN_ONE_QUEUE; + + if (ifr->ifr_flags & IFF_VNET_HDR) + tun->flags |= TUN_VNET_HDR; + else + tun->flags &= ~TUN_VNET_HDR; + + if (ifr->ifr_flags & IFF_MULTI_QUEUE) + tun->flags |= TUN_TAP_MQ; + else + tun->flags &= ~TUN_TAP_MQ; + + /* Make sure persistent devices do not get stuck in + * xoff state. + */ + if (netif_running(tun->dev)) + netif_tx_wake_all_queues(tun->dev); + + strcpy(ifr->ifr_name, tun->dev->name); + return 0; + +err_detach: + tun_detach_all(dev); +err_free_flow: + tun_flow_uninit(tun); + security_tun_dev_free_security(tun->security); +err_free_dev: + free_netdev(dev); + return err; +} + +static void tun_get_iff(struct net *net, struct tun_struct *tun, + struct ifreq *ifr) +{ + tun_debug(KERN_INFO, tun, "tun_get_iff\n"); + + strcpy(ifr->ifr_name, tun->dev->name); + + ifr->ifr_flags = tun_flags(tun); + +} + +/* This is like a cut-down ethtool ops, except done via tun fd so no + * privs required. */ +static int set_offload(struct tun_struct *tun, unsigned long arg) +{ + netdev_features_t features = 0; + + if (arg & TUN_F_CSUM) { + features |= NETIF_F_HW_CSUM; + arg &= ~TUN_F_CSUM; + + if (arg & (TUN_F_TSO4|TUN_F_TSO6)) { + if (arg & TUN_F_TSO_ECN) { + features |= NETIF_F_TSO_ECN; + arg &= ~TUN_F_TSO_ECN; + } + if (arg & TUN_F_TSO4) + features |= NETIF_F_TSO; + if (arg & TUN_F_TSO6) + features |= NETIF_F_TSO6; + arg &= ~(TUN_F_TSO4|TUN_F_TSO6); + } + + if (arg & TUN_F_UFO) { + features |= NETIF_F_UFO; + arg &= ~TUN_F_UFO; + } + } + + /* This gives the user a way to test for new features in future by + * trying to set them. */ + if (arg) + return -EINVAL; + + tun->set_features = features; + netdev_update_features(tun->dev); + + return 0; +} + +static void tun_detach_filter(struct tun_struct *tun, int n) +{ + int i; + struct tun_file *tfile; + + for (i = 0; i < n; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + __sk_detach_filter(tfile->socket.sk, lockdep_rtnl_is_held()); + } + + tun->filter_attached = false; +} + +static int tun_attach_filter(struct tun_struct *tun) +{ + int i, ret = 0; + struct tun_file *tfile; + + for (i = 0; i < tun->numqueues; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + ret = __sk_attach_filter(&tun->fprog, tfile->socket.sk, + lockdep_rtnl_is_held()); + if (ret) { + tun_detach_filter(tun, i); + return ret; + } + } + + tun->filter_attached = true; + return ret; +} + +static void tun_set_sndbuf(struct tun_struct *tun) +{ + struct tun_file *tfile; + int i; + + for (i = 0; i < tun->numqueues; i++) { + tfile = rtnl_dereference(tun->tfiles[i]); + tfile->socket.sk->sk_sndbuf = tun->sndbuf; + } +} + +static int tun_set_queue(struct file *file, struct ifreq *ifr) +{ + struct tun_file *tfile = file->private_data; + struct tun_struct *tun; + int ret = 0; + + rtnl_lock(); + + if (ifr->ifr_flags & IFF_ATTACH_QUEUE) { + tun = tfile->detached; + if (!tun) { + ret = -EINVAL; + goto unlock; + } + ret = security_tun_dev_attach_queue(tun->security); + if (ret < 0) + goto unlock; + ret = tun_attach(tun, file, false); + } else if (ifr->ifr_flags & IFF_DETACH_QUEUE) { + tun = rtnl_dereference(tfile->tun); + if (!tun || !(tun->flags & TUN_TAP_MQ) || tfile->detached) + ret = -EINVAL; + else + __tun_detach(tfile, false); + } else + ret = -EINVAL; + +unlock: + rtnl_unlock(); + return ret; +} + +static long __tun_chr_ioctl(struct file *file, unsigned int cmd, + unsigned long arg, int ifreq_len) +{ + struct tun_file *tfile = file->private_data; + struct tun_struct *tun; + void __user* argp = (void __user*)arg; + struct ifreq ifr; + kuid_t owner; + kgid_t group; + int sndbuf; + int vnet_hdr_sz; + unsigned int ifindex; + int ret; + + if (cmd == TUNSETIFF || cmd == TUNSETQUEUE || _IOC_TYPE(cmd) == 0x89) { + if (copy_from_user(&ifr, argp, ifreq_len)) + return -EFAULT; + } else { + memset(&ifr, 0, sizeof(ifr)); + } + if (cmd == TUNGETFEATURES) { + /* Currently this just means: "what IFF flags are valid?". + * This is needed because we never checked for invalid flags on + * TUNSETIFF. */ + return put_user(IFF_TUN | IFF_TAP | IFF_NO_PI | IFF_ONE_QUEUE | + IFF_VNET_HDR | IFF_MULTI_QUEUE, + (unsigned int __user*)argp); + } else if (cmd == TUNSETQUEUE) + return tun_set_queue(file, &ifr); + + ret = 0; + rtnl_lock(); + + tun = __tun_get(tfile); + if (cmd == TUNSETIFF && !tun) { + ifr.ifr_name[IFNAMSIZ-1] = '\0'; + + ret = tun_set_iff(tfile->net, file, &ifr); + + if (ret) + goto unlock; + + if (copy_to_user(argp, &ifr, ifreq_len)) + ret = -EFAULT; + goto unlock; + } + if (cmd == TUNSETIFINDEX) { + ret = -EPERM; + if (tun) + goto unlock; + + ret = -EFAULT; + if (copy_from_user(&ifindex, argp, sizeof(ifindex))) + goto unlock; + + ret = 0; + tfile->ifindex = ifindex; + goto unlock; + } + + ret = -EBADFD; + if (!tun) + goto unlock; + + tun_debug(KERN_INFO, tun, "tun_chr_ioctl cmd %u\n", cmd); + + ret = 0; + switch (cmd) { + case TUNGETIFF: + tun_get_iff(current->nsproxy->net_ns, tun, &ifr); + + if (tfile->detached) + ifr.ifr_flags |= IFF_DETACH_QUEUE; + if (!tfile->socket.sk->sk_filter) + ifr.ifr_flags |= IFF_NOFILTER; + + if (copy_to_user(argp, &ifr, ifreq_len)) + ret = -EFAULT; + break; + + case TUNSETNOCSUM: + /* Disable/Enable checksum */ + + /* [unimplemented] */ + tun_debug(KERN_INFO, tun, "ignored: set checksum %s\n", + arg ? "disabled" : "enabled"); + break; + + case TUNSETPERSIST: + /* Disable/Enable persist mode. Keep an extra reference to the + * module to prevent the module being unprobed. + */ + if (arg && !(tun->flags & TUN_PERSIST)) { + tun->flags |= TUN_PERSIST; + __module_get(THIS_MODULE); + } + if (!arg && (tun->flags & TUN_PERSIST)) { + tun->flags &= ~TUN_PERSIST; + module_put(THIS_MODULE); + } + + tun_debug(KERN_INFO, tun, "persist %s\n", + arg ? "enabled" : "disabled"); + break; + + case TUNSETOWNER: + /* Set owner of the device */ + owner = make_kuid(current_user_ns(), arg); + if (!uid_valid(owner)) { + ret = -EINVAL; + break; + } + tun->owner = owner; + tun_debug(KERN_INFO, tun, "owner set to %u\n", + from_kuid(&init_user_ns, tun->owner)); + break; + + case TUNSETGROUP: + /* Set group of the device */ + group = make_kgid(current_user_ns(), arg); + if (!gid_valid(group)) { + ret = -EINVAL; + break; + } + tun->group = group; + tun_debug(KERN_INFO, tun, "group set to %u\n", + from_kgid(&init_user_ns, tun->group)); + break; + + case TUNSETLINK: + /* Only allow setting the type when the interface is down */ + if (tun->dev->flags & IFF_UP) { + tun_debug(KERN_INFO, tun, + "Linktype set failed because interface is up\n"); + ret = -EBUSY; + } else { + tun->dev->type = (int) arg; + tun_debug(KERN_INFO, tun, "linktype set to %d\n", + tun->dev->type); + ret = 0; + } + break; + +#ifdef TUN_DEBUG + case TUNSETDEBUG: + tun->debug = arg; + break; +#endif + case TUNSETOFFLOAD: + ret = set_offload(tun, arg); + break; + + case TUNSETTXFILTER: + /* Can be set only for TAPs */ + ret = -EINVAL; + if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV) + break; + ret = update_filter(&tun->txflt, (void __user *)arg); + break; + + case SIOCGIFHWADDR: + /* Get hw address */ + memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN); + ifr.ifr_hwaddr.sa_family = tun->dev->type; + if (copy_to_user(argp, &ifr, ifreq_len)) + ret = -EFAULT; + break; + + case SIOCSIFHWADDR: + /* Set hw address */ + tun_debug(KERN_DEBUG, tun, "set hw address: %pM\n", + ifr.ifr_hwaddr.sa_data); + + ret = dev_set_mac_address(tun->dev, &ifr.ifr_hwaddr); + break; + + case TUNGETSNDBUF: + sndbuf = tfile->socket.sk->sk_sndbuf; + if (copy_to_user(argp, &sndbuf, sizeof(sndbuf))) + ret = -EFAULT; + break; + + case TUNSETSNDBUF: + if (copy_from_user(&sndbuf, argp, sizeof(sndbuf))) { + ret = -EFAULT; + break; + } + + tun->sndbuf = sndbuf; + tun_set_sndbuf(tun); + break; + + case TUNGETVNETHDRSZ: + vnet_hdr_sz = tun->vnet_hdr_sz; + if (copy_to_user(argp, &vnet_hdr_sz, sizeof(vnet_hdr_sz))) + ret = -EFAULT; + break; + + case TUNSETVNETHDRSZ: + if (copy_from_user(&vnet_hdr_sz, argp, sizeof(vnet_hdr_sz))) { + ret = -EFAULT; + break; + } + if (vnet_hdr_sz < (int)sizeof(struct virtio_net_hdr)) { + ret = -EINVAL; + break; + } + + tun->vnet_hdr_sz = vnet_hdr_sz; + break; + + case TUNATTACHFILTER: + /* Can be set only for TAPs */ + ret = -EINVAL; + if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV) + break; + ret = -EFAULT; + if (copy_from_user(&tun->fprog, argp, sizeof(tun->fprog))) + break; + + ret = tun_attach_filter(tun); + break; + + case TUNDETACHFILTER: + /* Can be set only for TAPs */ + ret = -EINVAL; + if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV) + break; + ret = 0; + tun_detach_filter(tun, tun->numqueues); + break; + + case TUNGETFILTER: + ret = -EINVAL; + if ((tun->flags & TUN_TYPE_MASK) != TUN_TAP_DEV) + break; + ret = -EFAULT; + if (copy_to_user(argp, &tun->fprog, sizeof(tun->fprog))) + break; + ret = 0; + break; + + default: + ret = -EINVAL; + break; + } + +unlock: + rtnl_unlock(); + if (tun) + tun_put(tun); + return ret; +} + +static long tun_chr_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + return __tun_chr_ioctl(file, cmd, arg, sizeof (struct ifreq)); +} + +#ifdef CONFIG_COMPAT +static long tun_chr_compat_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + switch (cmd) { + case TUNSETIFF: + case TUNGETIFF: + case TUNSETTXFILTER: + case TUNGETSNDBUF: + case TUNSETSNDBUF: + case SIOCGIFHWADDR: + case SIOCSIFHWADDR: + arg = (unsigned long)compat_ptr(arg); + break; + default: + arg = (compat_ulong_t)arg; + break; + } + + /* + * compat_ifreq is shorter than ifreq, so we must not access beyond + * the end of that structure. All fields that are used in this + * driver are compatible though, we don't need to convert the + * contents. + */ + return __tun_chr_ioctl(file, cmd, arg, sizeof(struct compat_ifreq)); +} +#endif /* CONFIG_COMPAT */ + +static int tun_chr_fasync(int fd, struct file *file, int on) +{ + struct tun_file *tfile = file->private_data; + int ret; + + if ((ret = fasync_helper(fd, file, on, &tfile->fasync)) < 0) + goto out; + + if (on) { + ret = __f_setown(file, task_pid(current), PIDTYPE_PID, 0); + if (ret) + goto out; + tfile->flags |= TUN_FASYNC; + } else + tfile->flags &= ~TUN_FASYNC; + ret = 0; +out: + return ret; +} + +static int tun_chr_open(struct inode *inode, struct file * file) +{ + struct tun_file *tfile; + + DBG1(KERN_INFO, "tunX: tun_chr_open\n"); + + tfile = (struct tun_file *)sk_alloc(&init_net, AF_UNSPEC, GFP_KERNEL, + &tun_proto); + if (!tfile) + return -ENOMEM; + RCU_INIT_POINTER(tfile->tun, NULL); + tfile->net = get_net(current->nsproxy->net_ns); + tfile->flags = 0; + tfile->ifindex = 0; + + init_waitqueue_head(&tfile->wq.wait); + RCU_INIT_POINTER(tfile->socket.wq, &tfile->wq); + + tfile->socket.file = file; + tfile->socket.ops = &tun_socket_ops; + + sock_init_data(&tfile->socket, &tfile->sk); + sk_change_net(&tfile->sk, tfile->net); + + tfile->sk.sk_write_space = tun_sock_write_space; + tfile->sk.sk_sndbuf = INT_MAX; + + file->private_data = tfile; + set_bit(SOCK_EXTERNALLY_ALLOCATED, &tfile->socket.flags); + INIT_LIST_HEAD(&tfile->next); + + sock_set_flag(&tfile->sk, SOCK_ZEROCOPY); + + return 0; +} + +static int tun_chr_close(struct inode *inode, struct file *file) +{ + struct tun_file *tfile = file->private_data; + struct net *net = tfile->net; + + tun_detach(tfile, true); + put_net(net); + + return 0; +} + +#ifdef CONFIG_PROC_FS +static int tun_chr_show_fdinfo(struct seq_file *m, struct file *f) +{ + struct tun_struct *tun; + struct ifreq ifr; + + memset(&ifr, 0, sizeof(ifr)); + + rtnl_lock(); + tun = tun_get(f); + if (tun) + tun_get_iff(current->nsproxy->net_ns, tun, &ifr); + rtnl_unlock(); + + if (tun) + tun_put(tun); + + return seq_printf(m, "iff:\t%s\n", ifr.ifr_name); +} +#endif + +static const struct file_operations tun_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .read = do_sync_read, + .aio_read = tun_chr_aio_read, + .write = do_sync_write, + .aio_write = tun_chr_aio_write, + .poll = tun_chr_poll, + .unlocked_ioctl = tun_chr_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = tun_chr_compat_ioctl, +#endif + .open = tun_chr_open, + .release = tun_chr_close, + .fasync = tun_chr_fasync, +#ifdef CONFIG_PROC_FS + .show_fdinfo = tun_chr_show_fdinfo, +#endif +}; + +static struct miscdevice tun_miscdev = { + .minor = (TUN_MINOR1), + .name = "bf_tun", + .nodename = "net/bf_tun", + .fops = &tun_fops, +}; + +/* ethtool interface */ + +static int tun_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + cmd->supported = 0; + cmd->advertising = 0; + ethtool_cmd_speed_set(cmd, SPEED_10); + cmd->duplex = DUPLEX_FULL; + cmd->port = PORT_TP; + cmd->phy_address = 0; + cmd->transceiver = XCVR_INTERNAL; + cmd->autoneg = AUTONEG_DISABLE; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +static void tun_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct tun_struct *tun = netdev_priv(dev); + + strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); + strlcpy(info->version, DRV_VERSION, sizeof(info->version)); + + switch (tun->flags & TUN_TYPE_MASK) { + case TUN_TUN_DEV: + strlcpy(info->bus_info, "bf_tun", sizeof(info->bus_info)); + break; + case TUN_TAP_DEV: + strlcpy(info->bus_info, "tap", sizeof(info->bus_info)); + break; + } +} + +static u32 tun_get_msglevel(struct net_device *dev) +{ +#ifdef TUN_DEBUG + struct tun_struct *tun = netdev_priv(dev); + return tun->debug; +#else + return -EOPNOTSUPP; +#endif +} + +static void tun_set_msglevel(struct net_device *dev, u32 value) +{ +#ifdef TUN_DEBUG + struct tun_struct *tun = netdev_priv(dev); + tun->debug = value; +#endif +} + +static const struct ethtool_ops tun_ethtool_ops = { + .get_settings = tun_get_settings, + .get_drvinfo = tun_get_drvinfo, + .get_msglevel = tun_get_msglevel, + .set_msglevel = tun_set_msglevel, + .get_link = ethtool_op_get_link, + .get_ts_info = ethtool_op_get_ts_info, +}; + + +static int __init tun_init(void) +{ + int ret = 0; + + pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION); + pr_info("%s\n", DRV_COPYRIGHT); + + ret = rtnl_link_register(&tun_link_ops); + if (ret) { + pr_err("Can't register link_ops\n"); + goto err_linkops; + } + + ret = misc_register(&tun_miscdev); + if (ret) { + pr_err("Can't register misc device %d\n", (TUN_MINOR1)); + goto err_misc; + } + return 0; +err_misc: + rtnl_link_unregister(&tun_link_ops); +err_linkops: + return ret; +} + +static void tun_cleanup(void) +{ + misc_deregister(&tun_miscdev); + rtnl_link_unregister(&tun_link_ops); +} + +/* Get an underlying socket object from tun file. Returns error unless file is + * attached to a device. The returned object works like a packet socket, it + * can be used for sock_sendmsg/sock_recvmsg. The caller is responsible for + * holding a reference to the file for as long as the socket is in use. */ +struct socket *bf_tun_get_socket(struct file *file) +{ + struct tun_file *tfile; + if (file->f_op != &tun_fops) + return ERR_PTR(-EINVAL); + tfile = file->private_data; + if (!tfile) + return ERR_PTR(-EBADFD); + return &tfile->socket; +} +EXPORT_SYMBOL_GPL(bf_tun_get_socket); + +module_init(tun_init); +module_exit(tun_cleanup); +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR(DRV_COPYRIGHT); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(TUN_MINOR1); +MODULE_ALIAS("devname:net/bf_tun"); diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/i2c-mcp2221.c b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/i2c-mcp2221.c new file mode 100644 index 000000000000..fcaa57fbafac --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/i2c-mcp2221.c @@ -0,0 +1,611 @@ +/* + * i2c bus driver for MCP2221 + * + * Derived from: + * i2c-tiny-usb.c + * i2c-diolan-u2c.c + * usb-serial.c + * onetouch.c + * usb-skeleton.c + * + * Copyright (C) 2014 Microchip Technology Inc. + * + * Author: Bogdan Bolocan http://www.microchip.com/support + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "i2c-mcp2221" + +#define USB_VENDOR_ID_MCP2221 0x04d8 +#define USB_DEVICE_ID_MCP2221 0x00dd + +#define MCP2221_OUTBUF_LEN 64 /* USB write packet length */ +#define MCP2221_INBUF_LEN 64 /* USB read packet length */ + +#define MCP2221_MAX_I2C_DATA_LEN 60 + +//#define MCP2221_FREQ_STD 100000 +#define MCP2221_FREQ_STD 400000 +//#define MCP2221_FREQ_STD 50000 +#define MCP2221_FREQ_MAX 500000 + +#define MCP2221_RETRY_MAX 50 +#define MCP2221_STD_DELAY_MS 1 +//#define MCP2221_STD_DELAY_MS 2 + +#define RESP_ERR_NOERR 0x00 +#define RESP_ADDR_NACK 0x25 +#define RESP_READ_ERR 0x7F +#define RESP_READ_COMPL 0x55 +#define RESP_I2C_IDLE 0x00 +#define RESP_I2C_START_TOUT 0x12 +#define RESP_I2C_RSTART_TOUT 0x17 +#define RESP_I2C_WRADDRL_TOUT 0x23 +#define RESP_I2C_WRADDRL_WSEND 0x21 +#define RESP_I2C_WRADDRL_NACK 0x25 +#define RESP_I2C_WRDATA_TOUT 0x44 +#define RESP_I2C_RDDATA_TOUT 0x52 +#define RESP_I2C_STOP_TOUT 0x62 + +#define CMD_MCP2221_STATUS 0x10 +#define SUBCMD_STATUS_CANCEL 0x10 +#define SUBCMD_STATUS_SPEED 0x20 +#define MASK_ADDR_NACK 0x40 + +#define CMD_MCP2221_RDDATA7 0x91 +#define CMD_MCP2221_GET_RDDATA 0x40 + +#define CMD_MCP2221_WRDATA7 0x90 + +/* Structure to hold all of our device specific stuff */ +struct i2c_mcp2221 { + u8 obuffer[MCP2221_OUTBUF_LEN]; /* USB write buffer */ + u8 ibuffer[MCP2221_INBUF_LEN]; /* USB read buffer */ + /* I2C/SMBus data buffer */ + u8 user_data_buffer[MCP2221_MAX_I2C_DATA_LEN]; + int ep_in, ep_out; /* Endpoints */ + struct usb_device *usb_dev; /* the usb device for this device */ + struct usb_interface *interface;/* the interface for this device */ + struct i2c_adapter adapter; /* i2c related things */ + uint frequency; /* I2C/SMBus communication frequency */ + /* Mutex for low-level USB transactions */ + struct mutex mcp2221_usb_op_lock; + /* wq to wait for an ongoing read/write */ + wait_queue_head_t usb_urb_completion_wait; + bool ongoing_usb_ll_op; /* a ll is in progress */ + + struct urb *interrupt_in_urb; + struct urb *interrupt_out_urb; +}; + +static uint frequency = MCP2221_FREQ_STD; /* I2C clock frequency in Hz */ + +module_param(frequency, uint, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(frequency, "I2C clock frequency in hertz"); + +/* usb layer */ + + +/* + * Return list of supported functionality. + */ +static u32 mcp2221_usb_func(struct i2c_adapter *a) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | + I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; +} + +static void mcp2221_usb_cmpl_cbk(struct urb *urb) +{ + struct i2c_mcp2221 *dev = urb->context; + int status = urb->status; + int retval; + + switch (status) { + case 0: /* success */ + break; + case -ECONNRESET: /* unlink */ + case -ENOENT: + case -ESHUTDOWN: + return; + /* -EPIPE: should clear the halt */ + default: /* error */ + goto resubmit; + } + + /* wake up the waitting function + modify the flag indicating the ll status */ + dev->ongoing_usb_ll_op = 0; + wake_up_interruptible(&dev->usb_urb_completion_wait); + return; + +resubmit: + retval = usb_submit_urb(urb, GFP_ATOMIC); + if (retval) { + dev_err(&dev->interface->dev, + "mcp2221(irq): can't resubmit intrerrupt urb, retval %d\n", + retval); + } +} + +static int mcp2221_ll_cmd(struct i2c_mcp2221 *dev) +{ + int rv; + + /* tell everybody to leave the URB alone */ + dev->ongoing_usb_ll_op = 1; + + /* submit the interrupt out ep packet */ + if (usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL)) { + dev_err(&dev->interface->dev, + "mcp2221(ll): usb_submit_urb intr out failed\n"); + dev->ongoing_usb_ll_op = 0; + return -EIO; + } + + /* wait for its completion */ + rv = wait_event_interruptible(dev->usb_urb_completion_wait, + (!dev->ongoing_usb_ll_op)); + if (rv < 0) { + dev_err(&dev->interface->dev, "mcp2221(ll): wait interrupted\n"); + goto ll_exit_clear_flag; + } + + /* tell everybody to leave the URB alone */ + dev->ongoing_usb_ll_op = 1; + + /* submit the interrupt in ep packet */ + if (usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL)) { + dev_err(&dev->interface->dev, "mcp2221(ll): usb_submit_urb intr in failed\n"); + dev->ongoing_usb_ll_op = 0; + return -EIO; + } + + /* wait for its completion */ + rv = wait_event_interruptible(dev->usb_urb_completion_wait, + (!dev->ongoing_usb_ll_op)); + if (rv < 0) { + dev_err(&dev->interface->dev, "mcp2221(ll): wait interrupted\n"); + goto ll_exit_clear_flag; + } + +ll_exit_clear_flag: + dev->ongoing_usb_ll_op = 0; + return rv; +} + +static int mcp2221_init(struct i2c_mcp2221 *dev) +{ + int ret; + + ret = 0; + if (frequency > MCP2221_FREQ_MAX) + frequency = MCP2221_FREQ_MAX; + + /* initialize the MCP2221 and bring it to "idle/ready" state */ + dev_info(&dev->interface->dev, + "MCP2221 at USB bus %03d address %03d Freq=%dKhz-- mcp2221_init()\n", + dev->usb_dev->bus->busnum, dev->usb_dev->devnum, frequency/1000); + + /* initialize unlocked mutex */ + mutex_init(&dev->mcp2221_usb_op_lock); + + dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->interrupt_out_urb) + goto init_error; + + usb_fill_int_urb(dev->interrupt_out_urb, dev->usb_dev, + usb_sndintpipe(dev->usb_dev, + dev->ep_out), + (void *)&dev->obuffer, MCP2221_OUTBUF_LEN, + mcp2221_usb_cmpl_cbk, dev, + 1); + + dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->interrupt_in_urb) + goto init_error; + + usb_fill_int_urb(dev->interrupt_in_urb, dev->usb_dev, + usb_rcvintpipe(dev->usb_dev, + dev->ep_in), + (void *)&dev->ibuffer, MCP2221_INBUF_LEN, + mcp2221_usb_cmpl_cbk, dev, + 1); + ret = 0; + goto init_no_error; + +init_error: + dev_err(&dev->interface->dev, "mcp2221_init: Error = %d\n", ret); + ret = -ENODEV; + +init_no_error: + dev_info(&dev->interface->dev, "mcp2221_init: Success\n"); + return ret; +} + +static int mcp2221_i2c_readwrite(struct i2c_mcp2221 *dev, + struct i2c_msg *pmsg) +{ + u8 ucI2cDiv, ucCancelXfer, ucXferLen; + int rv, retries; + unsigned int sleepCmd; + u8 *pSrc, *pDst, usbCmdStatus; + + retries = 0; + ucCancelXfer = 0; + /* clock divider for I2C operations */ + ucI2cDiv = (u8)((12000000/frequency) - 3); + + /* determine the best delay value here */ + /* (MCP2221_STD_DELAY_MS * MCP2221_FREQ_MAX)/frequency; */ + sleepCmd = MCP2221_STD_DELAY_MS; + + if (pmsg->len > MCP2221_MAX_I2C_DATA_LEN) + return -EINVAL; + +readwrite_reinit: + dev->obuffer[0] = CMD_MCP2221_STATUS; /* code for STATUS cmd */ + dev->obuffer[1] = 0x00; + dev->obuffer[2] = ucCancelXfer; /* cancel subcmd */ + dev->obuffer[3] = SUBCMD_STATUS_SPEED; /* set the xfer speed */ + dev->obuffer[4] = ucI2cDiv; + dev->obuffer[5] = 0x00; + dev->obuffer[6] = 0x00; + dev->obuffer[7] = 0x00; + + rv = mcp2221_ll_cmd(dev); + if (rv < 0) + return -EFAULT; + + if (dev->ibuffer[1] != RESP_ERR_NOERR) + return -EFAULT; + + if (dev->ibuffer[3] != SUBCMD_STATUS_SPEED) { + /* the speed could not be set - wait a while and retry */ + if (retries < MCP2221_RETRY_MAX) { + /* wait a while and retry the operation */ + retries++; + msleep(MCP2221_STD_DELAY_MS); + ucCancelXfer = SUBCMD_STATUS_CANCEL; + goto readwrite_reinit; + } else { + /* max number of retries was reached - return error */ + dev_err(&dev->interface->dev, + "mcp2221 CANCEL ERROR:retries = %d\n", retries); + return -EFAULT; + } + } + + if (pmsg->flags & I2C_M_RD) { + /* I2C read */ + ucXferLen = (u8)pmsg->len; + dev->obuffer[0] = CMD_MCP2221_RDDATA7; + dev->obuffer[1] = ucXferLen; /* LSB of the xfer length */ + dev->obuffer[2] = 0; /* no MSB for the xfer length */ + /* address in 8-bit format */ + dev->obuffer[3] = (u8)((pmsg->addr) << 1); + + rv = mcp2221_ll_cmd(dev); + if (rv < 0) + return -EFAULT; + + if (dev->ibuffer[1] != RESP_ERR_NOERR) + return -EFAULT; + + retries = 0; + dev->obuffer[0] = CMD_MCP2221_GET_RDDATA; + dev->obuffer[1] = 0x00; + dev->obuffer[2] = 0x00; + dev->obuffer[3] = 0x00; + + while (retries < MCP2221_RETRY_MAX) { + msleep(sleepCmd); + + rv = mcp2221_ll_cmd(dev); + if (rv < 0) + return -EFAULT; + + if (dev->ibuffer[1] != RESP_ERR_NOERR) + return -EFAULT; + + if (dev->ibuffer[2] == RESP_ADDR_NACK) + return -EFAULT; + + /* break the loop - cmd ended ok - used for bus scan */ + if ((dev->ibuffer[3] == 0x00) && + (dev->ibuffer[2] == 0x00)) + break; + + if (dev->ibuffer[3] == RESP_READ_ERR) { + retries++; + continue; + } + + if ((dev->ibuffer[2] == RESP_READ_COMPL) && + (dev->ibuffer[3] == ucXferLen)) { + /* we got the data - copy it */ + pSrc = (u8 *)&dev->ibuffer[4]; + pDst = (u8 *)&pmsg->buf[0]; + memcpy(pDst, pSrc, ucXferLen); + + if (pmsg->flags & I2C_M_RECV_LEN) + pmsg->len = ucXferLen; + + break; + } + + } + if (retries >= MCP2221_RETRY_MAX) + return -EFAULT; + } else { + /* I2C write */ + ucXferLen = (u8)pmsg->len; + dev->obuffer[0] = CMD_MCP2221_WRDATA7; + dev->obuffer[1] = ucXferLen; /* LSB of the xfer length */ + dev->obuffer[2] = 0; /* no MSB for the xfer length */ + /* address in 8-bit format */ + dev->obuffer[3] = (u8)((pmsg->addr) << 1); + /* copy the data we've read back */ + pSrc = (u8 *)&pmsg->buf[0]; + pDst = (u8 *)&dev->obuffer[4]; + memcpy(pDst, pSrc, ucXferLen); + + retries = 0; + + while (retries < MCP2221_RETRY_MAX) { + rv = mcp2221_ll_cmd(dev); + if (rv < 0) + return -EFAULT; + + if (dev->ibuffer[1] != RESP_ERR_NOERR) { + usbCmdStatus = dev->ibuffer[2]; + if (usbCmdStatus == RESP_I2C_START_TOUT) + return -EFAULT; + + if (usbCmdStatus == RESP_I2C_WRADDRL_TOUT) + return -EFAULT; + + if (usbCmdStatus == RESP_I2C_WRADDRL_NACK) + return -EFAULT; + + if (usbCmdStatus == RESP_I2C_WRDATA_TOUT) + return -EFAULT; + + if (usbCmdStatus == RESP_I2C_STOP_TOUT) + return -EFAULT; + + msleep(sleepCmd); + retries++; + continue; + } else { /* command completed successfully */ + break; + } + } + if (retries >= MCP2221_RETRY_MAX) + return -EFAULT; + + /* now, prepare for the STATUS stage */ + retries = 0; + dev->obuffer[0] = CMD_MCP2221_STATUS; /* code for STATUS cmd */ + dev->obuffer[1] = 0x00; + dev->obuffer[2] = 0x00; + dev->obuffer[3] = 0x00; + dev->obuffer[4] = 0x00; + dev->obuffer[5] = 0x00; + dev->obuffer[6] = 0x00; + dev->obuffer[7] = 0x00; + + while (retries < MCP2221_RETRY_MAX) { + rv = mcp2221_ll_cmd(dev); + if (rv < 0) + return -EFAULT; + + if (dev->ibuffer[1] != RESP_ERR_NOERR) + return -EFAULT; + + /* i2c slave address was nack-ed */ + if (dev->ibuffer[20] & MASK_ADDR_NACK) + return -EFAULT; + + usbCmdStatus = dev->ibuffer[8]; + if (usbCmdStatus == RESP_I2C_IDLE) + break; + + if (usbCmdStatus == RESP_I2C_START_TOUT) + return -EFAULT; + + if (usbCmdStatus == RESP_I2C_WRADDRL_TOUT) + return -EFAULT; + + if (usbCmdStatus == RESP_I2C_WRADDRL_WSEND) + return -EFAULT; + + if (usbCmdStatus == RESP_I2C_WRADDRL_NACK) + return -EFAULT; + + if (usbCmdStatus == RESP_I2C_WRDATA_TOUT) + return -EFAULT; + + if (usbCmdStatus == RESP_I2C_STOP_TOUT) + return -EFAULT; + + msleep(sleepCmd); + retries++; + } + if (retries >= MCP2221_RETRY_MAX) + return -EFAULT; + } + + return 0; +} + +/* device layer */ +static int mcp2221_usb_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct i2c_mcp2221 *dev = i2c_get_adapdata(adap); + struct i2c_msg *pmsg; + int ret, count; + + for (count = 0; count < num; count++) { + pmsg = &msgs[count]; + /* no concurrent users of the mcp2221 i2c xfer */ + ret = mutex_lock_interruptible(&dev->mcp2221_usb_op_lock); + if (ret < 0) + goto abort; + + ret = mcp2221_i2c_readwrite(dev, pmsg); + mutex_unlock(&dev->mcp2221_usb_op_lock); + if (ret < 0) + goto abort; + } + + /* if all the messages were transferred ok, return "num" */ + ret = num; + +abort: + return ret; +} + +static const struct i2c_algorithm mcp2221_usb_algorithm = { + .master_xfer = mcp2221_usb_i2c_xfer, + .functionality = mcp2221_usb_func, +}; + +static const struct usb_device_id mcp2221_table[] = { + { USB_DEVICE(USB_VENDOR_ID_MCP2221, USB_DEVICE_ID_MCP2221) }, + { } +}; + +MODULE_DEVICE_TABLE(usb, mcp2221_table); + +static void mcp2221_free(struct i2c_mcp2221 *dev) +{ + usb_put_dev(dev->usb_dev); + kfree(dev); +} + +static int mcp2221_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_host_interface *hostif = interface->cur_altsetting; + struct i2c_mcp2221 *dev; + int ret; + + if ((hostif->desc.bInterfaceNumber != 2) + || (hostif->desc.bInterfaceClass != 3)) { + pr_info("i2c-mcp2221(probe): Interface doesn't match the MCP2221 HID\n"); + return -ENODEV; + } + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (dev == NULL) { + pr_info("i2c-mcp2221(probe): no memory for device state\n"); + ret = -ENOMEM; + goto error; + } + + dev->ep_in = hostif->endpoint[0].desc.bEndpointAddress; + dev->ep_out = hostif->endpoint[1].desc.bEndpointAddress; + + dev->usb_dev = usb_get_dev(interface_to_usbdev(interface)); + dev->interface = interface; + + init_waitqueue_head(&dev->usb_urb_completion_wait); + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + /* setup i2c adapter description */ + dev->adapter.owner = THIS_MODULE; + dev->adapter.class = I2C_CLASS_HWMON; + dev->adapter.algo = &mcp2221_usb_algorithm; + i2c_set_adapdata(&dev->adapter, dev); + + snprintf(dev->adapter.name, sizeof(dev->adapter.name), + DRIVER_NAME " at bus %03d device %03d", + dev->usb_dev->bus->busnum, dev->usb_dev->devnum); + + dev->adapter.dev.parent = &dev->interface->dev; + + /* initialize mcp2221 i2c interface */ + ret = mcp2221_init(dev); + if (ret < 0) { + dev_err(&interface->dev, "failed to initialize adapter\n"); + goto error_free; + } + + /* and finally attach to i2c layer */ + ret = i2c_add_adapter(&dev->adapter); + if (ret < 0) { + dev_err(&interface->dev, "failed to add I2C adapter\n"); + goto error_free; + } + + dev_info(&dev->interface->dev, + "mcp2221_probe() -> chip connected -> Success\n"); + return 0; + +error_free: + usb_set_intfdata(interface, NULL); + mcp2221_free(dev); +error: + return ret; +} + +static void mcp2221_disconnect(struct usb_interface *interface) +{ + struct i2c_mcp2221 *dev = usb_get_intfdata(interface); + + i2c_del_adapter(&dev->adapter); + + usb_kill_urb(dev->interrupt_in_urb); + usb_kill_urb(dev->interrupt_out_urb); + usb_free_urb(dev->interrupt_in_urb); + usb_free_urb(dev->interrupt_out_urb); + + usb_set_intfdata(interface, NULL); + mcp2221_free(dev); + + pr_info("i2c-mcp2221(disconnect) -> chip disconnected"); +} + +static struct usb_driver mcp2221_driver = { + .name = DRIVER_NAME, + .probe = mcp2221_probe, + .disconnect = mcp2221_disconnect, + .id_table = mcp2221_table, +}; + +module_usb_driver(mcp2221_driver); + +MODULE_AUTHOR("Bogdan Bolocan"); +MODULE_DESCRIPTION(DRIVER_NAME "I2C MCP2221"); +MODULE_LICENSE("GPL v2"); diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_cpld.c b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_cpld.c new file mode 100644 index 000000000000..3a7d40ba9177 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_cpld.c @@ -0,0 +1,198 @@ +/* + * wnc_cpld.c - A driver for control wnc_cpld base on lm75.c + * + * Copyright (c) 1998, 1999 Frodo Looijaard + * Copyright (c) 2017 WNC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses scanned */ +static const unsigned short normal_i2c[] = { 0x31, 0x32, I2C_CLIENT_END }; + +/* Size of EEPROM in bytes */ +#define CPLD_SIZE 3 + +/* Each client has this additional data */ +struct cpld_data { + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 data[CPLD_SIZE]; /* Register value */ +}; + +static ssize_t show_value(struct device *dev, struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + data->data[0] = i2c_smbus_read_byte_data(client, attr->index); + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%02x\n", data->data[0]); +} + +static ssize_t set_value(struct device *dev, struct device_attribute *da, const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 temp; + int error; + + error = kstrtou8(buf, 10, &temp); + if (error) + return error; + + mutex_lock(&data->update_lock); + i2c_smbus_write_byte_data(client, attr->index, temp); + mutex_unlock(&data->update_lock); + + return count; +} + +static SENSOR_DEVICE_ATTR(reset_control, S_IWUSR | S_IRUGO, show_value, set_value, 2); +static SENSOR_DEVICE_ATTR(sfp_mod_abs1, S_IRUGO, show_value, NULL, 3); +static SENSOR_DEVICE_ATTR(sfp_mod_abs2, S_IRUGO, show_value, NULL, 4); +static SENSOR_DEVICE_ATTR(sfp_mod_abs3, S_IRUGO, show_value, NULL, 5); +static SENSOR_DEVICE_ATTR(sfp_mod_abs4, S_IRUGO, show_value, NULL, 6); +static SENSOR_DEVICE_ATTR(qsfp_modprs, S_IRUGO, show_value, NULL, 22); +static SENSOR_DEVICE_ATTR(qsfp_lpmode, S_IWUSR | S_IRUGO, show_value, set_value, 24); + +static struct attribute *cpld2_attributes[] = { + &sensor_dev_attr_reset_control.dev_attr.attr, + &sensor_dev_attr_sfp_mod_abs1.dev_attr.attr, + &sensor_dev_attr_sfp_mod_abs2.dev_attr.attr, + &sensor_dev_attr_sfp_mod_abs3.dev_attr.attr, + &sensor_dev_attr_qsfp_modprs.dev_attr.attr, + &sensor_dev_attr_qsfp_lpmode.dev_attr.attr, + NULL +}; + +static struct attribute *cpld1_attributes[] = { + &sensor_dev_attr_sfp_mod_abs1.dev_attr.attr, + &sensor_dev_attr_sfp_mod_abs2.dev_attr.attr, + &sensor_dev_attr_sfp_mod_abs3.dev_attr.attr, + &sensor_dev_attr_sfp_mod_abs4.dev_attr.attr, + NULL +}; + +static const struct attribute_group cpld2_group = { + .attrs = cpld2_attributes, +}; + +static const struct attribute_group cpld1_group = { + .attrs = cpld1_attributes, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int cpld_detect(struct i2c_client *new_client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + int conf; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + /* Unused bits */ + conf = i2c_smbus_read_byte_data(new_client, 0); + if (!conf) + return -ENODEV; + + return 0; +} + + +static int cpld_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct cpld_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; +#if 1 + data = devm_kzalloc(&client->dev, sizeof(struct cpld_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); +#endif + + if (client->addr == 49) /* 0x31 */ + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &cpld1_group); + else if (client->addr == 50) /* 0x32 */ + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &cpld2_group); + else + status = 1; + + if (status) + return status; + + dev_info(&client->dev, "cpld 0x%x found\n", client->addr); + + return 0; +} + +static int cpld_remove(struct i2c_client *client) +{ + if (client->addr == 49) /* 0x31 */ + sysfs_remove_group(&client->dev.kobj, &cpld1_group); + else if (client->addr == 50) /* 0x32 */ + sysfs_remove_group(&client->dev.kobj, &cpld2_group); + else + return 1; + + return 0; +} + +static const struct i2c_device_id cpld_id[] = { + { "wnc_cpld", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cpld_id); + +static struct i2c_driver cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "wnc_cpld", + }, + .probe = cpld_probe, + .remove = cpld_remove, + .id_table = cpld_id, + .detect = cpld_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(cpld_driver); + +MODULE_AUTHOR("WNC "); +MODULE_DESCRIPTION("WNC CPLD driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_cpld3.c b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_cpld3.c new file mode 100644 index 000000000000..a24698aa9cef --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_cpld3.c @@ -0,0 +1,200 @@ +/* + * wnc_cpld.c - A driver for control wnc_cpld3 base on lm75.c + * + * Copyright (c) 1998, 1999 Frodo Looijaard + * Copyright (c) 2017 WNC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Addresses scanned */ +static const unsigned short normal_i2c[] = { 0x33, I2C_CLIENT_END }; + +/* Size of EEPROM in bytes */ +#define CPLD_SIZE 3 + +/* Each client has this additional data */ +struct cpld_data { + struct i2c_client *client; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 data[CPLD_SIZE]; /* Register value */ +}; + +static ssize_t show_hwmon_value(struct device *dev, struct device_attribute *da, char *buf) +{ + struct cpld_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int index = to_sensor_dev_attr_2(da)->index; + + mutex_lock(&data->update_lock); + data->data[0] = i2c_smbus_read_byte_data(client, index); + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", data->data[0]); +} + +static ssize_t show_sysfs_value(struct device *dev, struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + data->data[0] = i2c_smbus_read_byte_data(client, attr->index); + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%02x\n", data->data[0]); +} + +static ssize_t set_hwmon_value(struct device *dev, struct device_attribute *da, const char *buf, size_t count) +{ + struct cpld_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int index = to_sensor_dev_attr_2(da)->index; + u8 temp; + int error; + + error = kstrtou8(buf, 10, &temp); + if (error) + return error; + + mutex_lock(&data->update_lock); + i2c_smbus_write_byte_data(client, index, temp); + mutex_unlock(&data->update_lock); + + return count; +} + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_hwmon_value, NULL, 6); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_hwmon_value, NULL, 7); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_hwmon_value, NULL, 8); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_hwmon_value, NULL, 9); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_hwmon_value, NULL, 10); +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_hwmon_value, set_hwmon_value, 6); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_hwmon_value, set_hwmon_value, 7); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_hwmon_value, set_hwmon_value, 8); +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR | S_IRUGO, show_hwmon_value, set_hwmon_value, 9); +static SENSOR_DEVICE_ATTR(pwm5, S_IWUSR | S_IRUGO, show_hwmon_value, set_hwmon_value, 10); + +static struct attribute *cpld3_hwmon_attrs[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm4.dev_attr.attr, + &sensor_dev_attr_pwm5.dev_attr.attr, + NULL +}; + +ATTRIBUTE_GROUPS(cpld3_hwmon); + +static SENSOR_DEVICE_ATTR(cpld_version, S_IRUGO, show_sysfs_value, NULL, 1); +static SENSOR_DEVICE_ATTR(power_good, S_IRUGO, show_sysfs_value, NULL, 4); + +static struct attribute *cpld3_sysfs_attrs[] = { + &sensor_dev_attr_cpld_version.dev_attr.attr, + &sensor_dev_attr_power_good.dev_attr.attr, + NULL +}; + +static const struct attribute_group cpld3_sysfs_group = { + .attrs = cpld3_sysfs_attrs, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int cpld_detect(struct i2c_client *new_client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + int conf; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + /* Unused bits */ + conf = i2c_smbus_read_byte_data(new_client, 0); + if (!conf) + return -ENODEV; + + return 0; +} + + +static int cpld_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *hwmon_dev; + struct cpld_data *data; + int status; + + data = devm_kzalloc(&client->dev, sizeof(struct cpld_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + status = sysfs_create_group(&client->dev.kobj, &cpld3_sysfs_group); + hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, client->name, data, cpld3_hwmon_groups); + + return PTR_ERR_OR_ZERO(hwmon_dev); +} + +static int cpld_remove(struct i2c_client *client) +{ + devm_hwmon_device_unregister(&client->dev); + sysfs_remove_group(&client->dev.kobj, &cpld3_sysfs_group); + return 0; +} + +static const struct i2c_device_id cpld_id[] = { + { "wnc_cpld3", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cpld_id); + +static struct i2c_driver cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "wnc_cpld3", + }, + .probe = cpld_probe, + .remove = cpld_remove, + .id_table = cpld_id, + .detect = cpld_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(cpld_driver); + +MODULE_AUTHOR("WNC "); +MODULE_DESCRIPTION("WNC CPLD3 driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_eeprom.c b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_eeprom.c new file mode 100644 index 000000000000..8ddf1f2af279 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/modules/wnc_eeprom.c @@ -0,0 +1,286 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57, I2C_CLIENT_END }; + + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 256 + +/* possible types of eeprom devices */ +enum eeprom_nature { + UNKNOWN, + VAIO, +}; + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[8]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ + enum eeprom_nature nature; +}; + + +static void eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + //for (i = slice << 5; i < (slice + 1) << 5; i += 32) + for (i = slice << 5; i < (slice + 1) << 5; i += 24) + if (i2c_smbus_read_i2c_block_data(client, i, + 24, data->data + i) + != 24) + goto exit; + } else { + for (i = slice << 5; i < (slice + 1) << 5; i += 2) { + int word = i2c_smbus_read_word_data(client, i); + if (word < 0) + goto exit; + data->data[i] = word & 0xff; + data->data[i + 1] = word >> 8; + } + } + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + data->valid = 0; + + if (off > EEPROM_SIZE) + return 0; + if (off + count > EEPROM_SIZE) + count = EEPROM_SIZE - off; + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> 5; slice <= (off + count - 1) >> 5; slice++) + eeprom_update_client(client, slice); + + /* Hide Vaio private settings to regular users: + - BIOS passwords: bytes 0x00 to 0x0f + - UUID: bytes 0x10 to 0x1f + - Serial number: 0xc0 to 0xdf */ + if (data->nature == VAIO && !capable(CAP_SYS_ADMIN)) { + int i; + + for (i = 0; i < count; i++) { + if ((off + i <= 0x1f) || + (off + i >= 0xc0 && off + i <= 0xdf)) + buf[i] = 0; + else + buf[i] = data->data[off + i]; + } + } else { + memcpy(buf, &data->data[off], count); + } + + return count; +} + +static ssize_t eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 temp; + int error, reg; + + mutex_lock(&data->update_lock); + + error = kstrtou8(buf, 10, &temp); + if (error) + return error; + + if (client->addr == 0x51) { /* SFP AOC cable, page selection byte is 126 */ + reg = 126; + } + else if (client->addr == 0x50) { /* QSFP, page selection byte is 127 */ + data->data[0] = i2c_smbus_read_byte_data(client, 0); + + /* Base on SFF-8024, determine this module is SFP or QSFP by byte 0 (Identifier) */ + switch (data->data[0]){ + case 12: + case 13: + case 17: + case 24: + reg = 127; + break; + + default: + goto exit; + } + } + else + goto exit; + + i2c_smbus_write_byte_data(client, reg, temp); + +exit: + mutex_unlock(&data->update_lock); + + return count; +} + +static struct bin_attribute eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IWUSR | S_IRUGO | S_IWGRP | S_IWOTH, + }, + .size = EEPROM_SIZE, + .read = eeprom_read, + .write = eeprom_write, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x50. So decline + attaching to addresses >= 0x51 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51) + return -ENODEV; + + /* There are four ways we can read the EEPROM data: + (1) I2C block reads (faster, but unsupported by most adapters) + (2) Word reads (128% overhead) + (3) Consecutive byte reads (88% overhead, unsafe) + (4) Regular byte data reads (265% overhead) + The third and fourth methods are not implemented by this driver + because all known adapters support one of the first two. */ + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_WORD_DATA) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) + return -ENODEV; + + strlcpy(info->type, "wnc_eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->nature = UNKNOWN; + + /* Detect the Vaio nature of EEPROMs. + We use the "PCG-" or "VGN-" prefix as the signature. */ + if (client->addr == 0x57 + && i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + char name[4]; + + name[0] = i2c_smbus_read_byte_data(client, 0x80); + name[1] = i2c_smbus_read_byte_data(client, 0x81); + name[2] = i2c_smbus_read_byte_data(client, 0x82); + name[3] = i2c_smbus_read_byte_data(client, 0x83); + + if (!memcmp(name, "PCG-", 4) || !memcmp(name, "VGN-", 4)) { + dev_info(&client->dev, "Vaio EEPROM detected, " + "enabling privacy protection\n"); + data->nature = VAIO; + } + } + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &eeprom_attr); + if (err) + goto exit_kfree; + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id eeprom_id[] = { + { "wnc_eeprom", 0 }, + { } +}; + +static struct i2c_driver eeprom_driver = { + .driver = { + .name = "wnc_eeprom", + }, + .probe = eeprom_probe, + .remove = eeprom_remove, + .id_table = eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(eeprom_driver); + +MODULE_AUTHOR("Frodo Looijaard and " + "Philip Edelbrock and " + "Greg Kroah-Hartman "); +MODULE_DESCRIPTION("I2C EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/device_node.sh b/platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/device_node.sh new file mode 100644 index 000000000000..7e1c7c45a725 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/device_node.sh @@ -0,0 +1,91 @@ +#!/bin/bash + +SEARCH_I2C_BUS=$(ls /sys/bus/i2c/devices) +I2C_BUS=-1 + +for i in $SEARCH_I2C_BUS +do + if [[ -n $(cat /sys/bus/i2c/devices/$i/name | grep i2c-mcp2221) ]]; then + I2C_BUS=$(echo $i | sed 's/i2c-//g') + break + fi +done + +if [[ $I2C_BUS == -1 ]]; then + echo "Can't find i2c-mcp2221" + exit +fi + +TOTAL_MUX=8 +START_NODE_NUM=$((I2C_BUS+1)) + +modprobe i2c_mux_pca954x force_deselect_on_exit=1 + +echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-$I2C_BUS/new_device +echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-$I2C_BUS/new_device +echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-$I2C_BUS/new_device +echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-$I2C_BUS/new_device +echo pca9548 0x74 > /sys/bus/i2c/devices/i2c-$I2C_BUS/new_device +echo pca9548 0x75 > /sys/bus/i2c/devices/i2c-$I2C_BUS/new_device +echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-$I2C_BUS/new_device +echo pca9548 0x77 > /sys/bus/i2c/devices/i2c-$I2C_BUS/new_device + +sleep 5 + +/sbin/modprobe wnc_cpld +/sbin/modprobe wnc_cpld3 +/sbin/modprobe wnc_eeprom +/sbin/modprobe eeprom + +# MUX0: i2c-3~i2c-10 +# MUX1: i2c-11~i2c-18 +# MUX2: i2c-19~i2c-26 +# MUX3: i2c-27~i2c-34 +# MUX4: i2c-35~i2c-42 +# MUX5: i2c-43~i2c-50 +# MUX6: i2c-51~i2c-58 +# MUX7: i2c-59~i2c-66 + +# MUX0 channel0 +CHANNEL=0 +echo wnc_cpld 0x31 > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device + +# MUX0 channel1 +CHANNEL=1 +echo wnc_cpld 0x32 > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device + +# MUX0 channel2 +CHANNEL=2 +echo wnc_cpld3 0x33 > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device +echo wnc_eeprom 0x53 > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device + +# MUX0 channel3 +CHANNEL=3 +echo wnc_eeprom 0x50 > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device +echo wnc_eeprom 0x51 > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device + +# MUX0 channel4 +CHANNEL=4 +echo wnc_eeprom 0x54 > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device +echo tmp421 0x1E > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device +sleep 1 +echo tmp75 0x4E > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device +sleep 1 +echo tmp421 0x4F > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device + +# MUX0 channel5 +CHANNEL=5 +echo wnc_eeprom 0x52 > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device + +# MUX0 channel7 +CHANNEL=7 +#echo wnc_eeprom 0x5B > /sys/bus/i2c/devices/i2c-$(($START_NODE_NUM+$CHANNEL))/new_device + +START_PORT_NUM=$((START_NODE_NUM+8)) +END_PORT_NUM=$((TOTAL_MUX*8+1)) + +for i in $(seq $START_PORT_NUM $END_PORT_NUM) +do + echo wnc_eeprom 0x50 > /sys/bus/i2c/devices/i2c-$i/new_device + echo wnc_eeprom 0x51 > /sys/bus/i2c/devices/i2c-$i/new_device +done diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/driver_load.sh b/platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/driver_load.sh new file mode 100644 index 000000000000..81cee0383ff2 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/driver_load.sh @@ -0,0 +1,50 @@ +#!/bin/bash + +vid=04d8 +pid=00dd + +#check to see if sysfs is mounted +sysfs_path=`awk '/^sysfs/{ print $2 }' < /proc/mounts` +curr_path=`pwd` + +#if variable is empty, we should exit. No SYSFS found +if [[ -z $sysfs_path ]]; then + echo "No sysfs in this system! Exiting..." + exit 1 +fi + +function load_drivers +{ + modprobe i2c-dev + if [[ $? -ne 0 ]]; then + echo "Cannot load the \"i2c-dev\" driver! Exiting..." + exit 1 + fi + modprobe i2c-mcp2221 + if [[ $? -ne 0 ]]; then + echo "Cannot load the \"i2c-mcp2221\" driver! Exiting..." + exit 1 + fi + echo "I2C related drivers are loaded" +} + +usb_device_path=${sysfs_path}/bus/usb/devices + +cd $usb_device_path + +for usbdev in *; do + idvendor=${usb_device_path}/${usbdev}/idVendor + idproduct=${usb_device_path}/${usbdev}/idProduct + usb_driver=${usb_device_path}/${usbdev}/${usbdev}:1.2/driver + if [[ -f $idvendor ]]; then + dev_vid=`grep -i $vid < $idvendor` + dev_pid=`grep -i $pid < $idproduct` + if [[ -n $dev_vid ]] && [[ -n $dev_pid ]]; then + echo "I found the requested VID/PID: $dev_vid, $dev_pid" + load_drivers + echo -n "${usbdev}:1.2" > ${usb_driver}/unbind + echo -n "${usbdev}:1.2" > ${sysfs_path}/bus/usb/drivers/i2c-mcp2221/bind + fi + fi +done + diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/test b/platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/test new file mode 100644 index 000000000000..38327722c91f --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/scripts/test @@ -0,0 +1 @@ +echo "test" diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/service/device_node.service b/platform/barefoot/sonic-platform-modules-wnc-osw1800/service/device_node.service new file mode 100644 index 000000000000..fd1bd9b15648 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/service/device_node.service @@ -0,0 +1,11 @@ +[Unit] +Description=Create device nodes for i2c devices. +Requires=driver_load.service +After=driver_load.service + +[Service] +Type=oneshot +ExecStart=/bin/bash /usr/local/bin/device_node.sh + +[Install] +WantedBy=multi-user.target diff --git a/platform/barefoot/sonic-platform-modules-wnc-osw1800/service/driver_load.service b/platform/barefoot/sonic-platform-modules-wnc-osw1800/service/driver_load.service new file mode 100644 index 000000000000..52ce4d2f4442 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-wnc-osw1800/service/driver_load.service @@ -0,0 +1,10 @@ +[Unit] +Description=Initialize i2c-mcp2221 driver. +Before=pmon.service + +[Service] +Type=oneshot +ExecStart=/bin/bash /usr/local/bin/driver_load.sh + +[Install] +WantedBy=multi-user.target diff --git a/platform/vs/tests/conftest.py b/platform/vs/tests/conftest.py index 9256597f5e37..48ad7e15661a 100644 --- a/platform/vs/tests/conftest.py +++ b/platform/vs/tests/conftest.py @@ -54,8 +54,21 @@ def __init__(self, dvs): atbl = swsscommon.Table(self.adb, "ASIC_STATE:SAI_OBJECT_TYPE_ACL_TABLE") keys = atbl.getKeys() - assert len(keys) == 1 - self.default_acl_table = keys[0] + assert len(keys) >= 1 + # Filter out DTel Acl tables + default_table_found = False + for k in keys: + if default_table_found: + break + (status, fvs) = atbl.get(k) + for item in fvs: + if item[0] == "SAI_ACL_TABLE_ATTR_ACL_BIND_POINT_TYPE_LIST": + if 'SAI_ACL_BIND_POINT_TYPE_PORT' in item[1]: + self.default_acl_table = k + default_table_found = True + break + else: + break atbl = swsscommon.Table(self.adb, "ASIC_STATE:SAI_OBJECT_TYPE_ACL_ENTRY") keys = atbl.getKeys() diff --git a/slave.mk b/slave.mk index a4199bb1ebb6..a7cb518cb078 100644 --- a/slave.mk +++ b/slave.mk @@ -31,6 +31,7 @@ PROJECT_ROOT = $(shell pwd) CONFIGURED_PLATFORM := $(shell [ -f .platform ] && cat .platform || echo generic) PLATFORM_PATH = platform/$(CONFIGURED_PLATFORM) export BUILD_NUMBER +export CONFIGURED_PLATFORM ############################################################################### ## Utility rules diff --git a/sonic-slave/Dockerfile b/sonic-slave/Dockerfile index 8949db34a973..2737dab75f85 100644 --- a/sonic-slave/Dockerfile +++ b/sonic-slave/Dockerfile @@ -114,6 +114,11 @@ RUN apt-get update && apt-get install -y \ # For mellanox sai build libtool-bin \ libxml2-dev \ +# For BFN sdk build + libusb-1.0-0-dev \ + libcurl3-nss-dev \ + libunwind8-dev \ + telnet \ # For build image cpio \ squashfs-tools \ diff --git a/src/sonic-config-engine/tests/sample_output/interfaces b/src/sonic-config-engine/tests/sample_output/interfaces index 96dc577ffe8b..e3f09afd1a83 100644 --- a/src/sonic-config-engine/tests/sample_output/interfaces +++ b/src/sonic-config-engine/tests/sample_output/interfaces @@ -19,6 +19,7 @@ iface lo inet static address 10.10.0.99 netmask 255.255.255.255 # + # The management network interface auto eth0 iface eth0 inet static diff --git a/src/sonic-sairedis b/src/sonic-sairedis index 8585fc84d422..c2c5e7cf7fa4 160000 --- a/src/sonic-sairedis +++ b/src/sonic-sairedis @@ -1 +1 @@ -Subproject commit 8585fc84d422abf74d472702de7ad5ab20aa55e5 +Subproject commit c2c5e7cf7fa477691cda579405dde3d2573e066c diff --git a/src/sonic-swss b/src/sonic-swss index 762e7da80142..dcf6c905410f 160000 --- a/src/sonic-swss +++ b/src/sonic-swss @@ -1 +1 @@ -Subproject commit 762e7da80142358af0d348dea1143f38aa60a992 +Subproject commit dcf6c905410f08b004e880dbed56823d29e7bd5e diff --git a/src/sonic-swss-common b/src/sonic-swss-common index 8c5dab6b3417..dd470177f592 160000 --- a/src/sonic-swss-common +++ b/src/sonic-swss-common @@ -1 +1 @@ -Subproject commit 8c5dab6b341752b4bda3f63917a9c143df778322 +Subproject commit dd470177f5920ca546d1cc65dd206193c35d7e43 From e3abf0c070e7cb92e116afc0fd2ab23ebe9173e8 Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Tue, 24 Jul 2018 21:46:55 -0700 Subject: [PATCH 027/180] [docker] Exit if docker run fails (#1870) --- files/build_templates/docker_image_ctl.j2 | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/files/build_templates/docker_image_ctl.j2 b/files/build_templates/docker_image_ctl.j2 index 1216013e63c2..e1873851c9c4 100644 --- a/files/build_templates/docker_image_ctl.j2 +++ b/files/build_templates/docker_image_ctl.j2 @@ -78,7 +78,10 @@ start() { {%- endif %} --tmpfs /tmp \ --tmpfs /var/tmp \ - --name={{docker_container_name}} {{docker_image_name}}:latest + --name={{docker_container_name}} {{docker_image_name}}:latest || { + echo "Failed to docker run" >&1 + exit 4 + } postStartAction } From 3c33737d589d81ba8d937291fb1d0de08110ac4b Mon Sep 17 00:00:00 2001 From: Ying Xie Date: Wed, 25 Jul 2018 08:14:18 -0700 Subject: [PATCH 028/180] [make] introducing new build option KERNEL_PROCURE_METHOD (#1837) * [make] introducing new build option KERNEL_BUILD_METHOD - Kernel could be built from source files with method 'build' - Kernel could be downloaded from Azure storage with method 'download' Signed-off-by: Ying Xie * Replace BUILD with PROCURE * fix typo --- Makefile | 4 +++- rules/config | 5 +++++ slave.mk | 8 ++++++++ 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 347041e1b12a..ccbefc9e0138 100644 --- a/Makefile +++ b/Makefile @@ -15,7 +15,8 @@ # * PASSWORD: Desired password -- default at rules/config # * KEEP_SLAVE_ON: Keeps slave container up after building-process concludes. # * SOURCE_FOLDER: host path to be mount as /var/$(USER)/src, only effective when KEEP_SLAVE_ON=yes -# * SONIC_BUILD_JOB: Specifying number of concurrent build job(s) to run +# * SONIC_BUILD_JOBS: Specifying number of concurrent build job(s) to run +# * KERNEL_PROCURE_METHOD: Specifying method of obtaining kernel Debian package: download or build # ############################################################################### @@ -69,6 +70,7 @@ SONIC_BUILD_INSTRUCTION := make \ PASSWORD=$(PASSWORD) \ USERNAME=$(USERNAME) \ SONIC_BUILD_JOBS=$(SONIC_BUILD_JOBS) \ + KERNEL_PROCURE_METHOD=$(KERNEL_PROCURE_METHOD) \ HTTP_PROXY=$(http_proxy) \ HTTPS_PROXY=$(https_proxy) \ SONIC_ENABLE_SYSTEM_TELEMETRY=$(ENABLE_SYSTEM_TELEMETRY) diff --git a/rules/config b/rules/config index 1505dfd71782..5e8a3389530d 100644 --- a/rules/config +++ b/rules/config @@ -66,3 +66,8 @@ ENABLE_ORGANIZATION_EXTENSIONS = y # ENABLE_SYSTEM_TELEMETRY - build docker-sonic-telemetry for system telemetry support # ENABLE_SYSTEM_TELEMETRY = y + +# DEFAULT_KERNEL_PROCURE_METHOD - default method for obtaining kernel +# build: build kernel from source +# download: download pre-built kernel from Azure storage. +DEFAULT_KERNEL_PROCURE_METHOD = build diff --git a/slave.mk b/slave.mk index a7cb518cb078..9ba1732e6a58 100644 --- a/slave.mk +++ b/slave.mk @@ -99,6 +99,10 @@ ifeq ($(SONIC_BUILD_JOBS),) override SONIC_BUILD_JOBS := $(SONIC_CONFIG_BUILD_JOBS) endif +ifeq ($(KERNEL_PROCURE_METHOD),) +override KERNEL_PROCURE_METHOD := $(DEFAULT_KERNEL_PROCURE_METHOD) +endif + MAKEFLAGS += -j $(SONIC_BUILD_JOBS) export SONIC_CONFIG_MAKE_JOBS @@ -127,6 +131,7 @@ $(info "HTTPS_PROXY" : "$(HTTPS_PROXY)") $(info "ENABLE_SYSTEM_TELEMETRY" : "$(ENABLE_SYSTEM_TELEMETRY)") $(info "SONIC_DEBUGGING_ON" : "$(SONIC_DEBUGGING_ON)") $(info "SONIC_PROFILING_ON" : "$(SONIC_PROFILING_ON)") +$(info "KERNEL_PROCURE_METHOD" : "$(KERNEL_PROCURE_METHOD)") $(info ) ############################################################################### @@ -134,6 +139,8 @@ $(info ) ## All rules must go after includes for propper targets expansion ############################################################################### +export kernel_procure_method="$(KERNEL_PROCURE_METHOD)" + ############################################################################### ## Local targets ############################################################################### @@ -149,6 +156,7 @@ $(addprefix $(DEBS_PATH)/, $(SONIC_COPY_DEBS)) : $(DEBS_PATH)/% : .platform { cp $($(deb)_PATH)/$(deb) $(DEBS_PATH)/ $(LOG) || exit 1 ; } ; ) $(FOOTER) + SONIC_TARGET_LIST += $(addprefix $(DEBS_PATH)/, $(SONIC_COPY_DEBS)) # Copy regular files from local directory From 10b4bbcae893fc41194813c053e9e2cd10e0cac1 Mon Sep 17 00:00:00 2001 From: pavel-shirshov Date: Thu, 26 Jul 2018 13:39:08 -0700 Subject: [PATCH 029/180] [swss]: Start counter from swss container (#1875) * sonic-quagga update. Don't spam with 'Vtysh connected from' message * Enable counters inside swss container. systemd is not flexible enough to follow our business rules --- dockers/docker-orchagent/Dockerfile.j2 | 1 + dockers/docker-orchagent/enable_counters.py | 34 +++++++++++++++++++ dockers/docker-orchagent/start.sh | 2 ++ dockers/docker-orchagent/supervisord.conf | 8 +++++ files/build_templates/enable_counters.service | 8 ----- files/build_templates/enable_counters.timer | 9 ----- files/build_templates/snmp.service.j2 | 4 +-- .../build_templates/sonic_debian_extension.j2 | 3 -- 8 files changed, 47 insertions(+), 22 deletions(-) create mode 100755 dockers/docker-orchagent/enable_counters.py delete mode 100644 files/build_templates/enable_counters.service delete mode 100644 files/build_templates/enable_counters.timer diff --git a/dockers/docker-orchagent/Dockerfile.j2 b/dockers/docker-orchagent/Dockerfile.j2 index 0df8e9ba1bb4..eceb82a06c76 100755 --- a/dockers/docker-orchagent/Dockerfile.j2 +++ b/dockers/docker-orchagent/Dockerfile.j2 @@ -30,6 +30,7 @@ RUN apt-get clean -y; apt-get autoclean -y; apt-get autoremove -y RUN rm -rf /debs COPY ["files/arp_update", "/usr/bin"] +COPY ["enable_counters.py", "/usr/bin"] COPY ["start.sh", "orchagent.sh", "swssconfig.sh", "/usr/bin/"] COPY ["supervisord.conf", "/etc/supervisor/conf.d/"] diff --git a/dockers/docker-orchagent/enable_counters.py b/dockers/docker-orchagent/enable_counters.py new file mode 100755 index 000000000000..712d34492b47 --- /dev/null +++ b/dockers/docker-orchagent/enable_counters.py @@ -0,0 +1,34 @@ +#!/usr/bin/env python + +import swsssdk +import time + +def enable_counter_group(db, name): + info = {} + info['FLEX_COUNTER_STATUS'] = 'enable' + db.mod_entry("FLEX_COUNTER_TABLE", name, info) + +def enable_counters(): + db = swsssdk.ConfigDBConnector() + db.connect() + enable_counter_group(db, 'PORT') + enable_counter_group(db, 'QUEUE') + enable_counter_group(db, 'PFCWD') + +def get_uptime(): + with open('/proc/uptime') as fp: + return float(fp.read().split(' ')[0]) + +def main(): + # If the switch was just started (uptime less than 5 minutes), + # wait for 3 minutes and enable counters + # otherwise wait for 60 seconds and enable counters + uptime = get_uptime() + if uptime < 300: + time.sleep(180) + else: + time.sleep(60) + enable_counters() + +if __name__ == '__main__': + main() diff --git a/dockers/docker-orchagent/start.sh b/dockers/docker-orchagent/start.sh index e26be9286aa3..0321bf8428f4 100755 --- a/dockers/docker-orchagent/start.sh +++ b/dockers/docker-orchagent/start.sh @@ -28,6 +28,8 @@ supervisorctl start intfmgrd supervisorctl start buffermgrd +supervisorctl start enable_counters + # Start arp_update when VLAN exists VLAN=`sonic-cfggen -d -v 'VLAN.keys() | join(" ") if VLAN'` if [ "$VLAN" != "" ]; then diff --git a/dockers/docker-orchagent/supervisord.conf b/dockers/docker-orchagent/supervisord.conf index dc28e3369ca5..2369a4c31b05 100644 --- a/dockers/docker-orchagent/supervisord.conf +++ b/dockers/docker-orchagent/supervisord.conf @@ -91,3 +91,11 @@ autostart=false autorestart=false stdout_logfile=syslog stderr_logfile=syslog + +[program:enable_counters] +command=/usr/bin/enable_counters.py +priority=11 +autostart=false +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog diff --git a/files/build_templates/enable_counters.service b/files/build_templates/enable_counters.service deleted file mode 100644 index 95424474cb15..000000000000 --- a/files/build_templates/enable_counters.service +++ /dev/null @@ -1,8 +0,0 @@ -[Unit] -Description=Enable SONiC counters -PartOf=swss.service - -[Service] -Type=oneshot -ExecStart=/bin/bash -c 'sleep 60 ; /usr/bin/counterpoll queue enable ; /usr/bin/counterpoll port enable ; /usr/bin/pfcwd counter_poll enable' -RemainAfterExit=yes diff --git a/files/build_templates/enable_counters.timer b/files/build_templates/enable_counters.timer deleted file mode 100644 index 40a91525a712..000000000000 --- a/files/build_templates/enable_counters.timer +++ /dev/null @@ -1,9 +0,0 @@ -[Unit] -Description=Delays the SONiC counters gathering until SONiC has started - -[Timer] -OnBootSec=2min -Unit=enable_counters.service - -[Install] -WantedBy=timers.target diff --git a/files/build_templates/snmp.service.j2 b/files/build_templates/snmp.service.j2 index 93ef869b86e1..6398477ab6a1 100644 --- a/files/build_templates/snmp.service.j2 +++ b/files/build_templates/snmp.service.j2 @@ -1,7 +1,7 @@ [Unit] Description=SNMP container -Requires=updategraph.service swss.service enable_counters.service -After=updategraph.service swss.service enable_counters.service +Requires=updategraph.service swss.service +After=updategraph.service swss.service [Service] ExecStartPre=/usr/bin/{{docker_container_name}}.sh start diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index 94be71a80935..4580f3f7e741 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -285,10 +285,7 @@ sudo LANG=C chroot $FILESYSTEM_ROOT umount -lf /sys # Copy systemd timer configuration # It implements delayed start of services -sudo cp $BUILD_TEMPLATES/enable_counters.timer $FILESYSTEM_ROOT/etc/systemd/system/ -sudo cp $BUILD_TEMPLATES/enable_counters.service $FILESYSTEM_ROOT/etc/systemd/system/ sudo cp $BUILD_TEMPLATES/snmp.timer $FILESYSTEM_ROOT/etc/systemd/system/ -sudo LANG=C chroot $FILESYSTEM_ROOT systemctl enable enable_counters.timer sudo LANG=C chroot $FILESYSTEM_ROOT systemctl enable snmp.timer sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get remove -y python-dev From da12f571e2f682e5274f7e7178e65efe6f27648a Mon Sep 17 00:00:00 2001 From: sihuihan88 Date: Thu, 26 Jul 2018 13:39:22 -0700 Subject: [PATCH 030/180] [sonic-utilities]: update submodule (#1871) Signed-off-by: Sihui Han --- src/sonic-utilities | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-utilities b/src/sonic-utilities index 4a36190b0bd7..747d5c386299 160000 --- a/src/sonic-utilities +++ b/src/sonic-utilities @@ -1 +1 @@ -Subproject commit 4a36190b0bd7f8e551431af6804060d5cf8ab26a +Subproject commit 747d5c386299a8fac2acb4f4594fe2498d33df36 From 7cbadb70ba313adde8f98f1d093e1ecbfb939812 Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Thu, 26 Jul 2018 23:32:49 -0700 Subject: [PATCH 031/180] Update submodule: swss-common, swss (#1878) Signed-off-by: Qi Luo --- src/sonic-swss | 2 +- src/sonic-swss-common | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/sonic-swss b/src/sonic-swss index dcf6c905410f..902239ad4c67 160000 --- a/src/sonic-swss +++ b/src/sonic-swss @@ -1 +1 @@ -Subproject commit dcf6c905410f08b004e880dbed56823d29e7bd5e +Subproject commit 902239ad4c67c8e85da296b00badbc08b9820001 diff --git a/src/sonic-swss-common b/src/sonic-swss-common index dd470177f592..9fa06dac45d7 160000 --- a/src/sonic-swss-common +++ b/src/sonic-swss-common @@ -1 +1 @@ -Subproject commit dd470177f5920ca546d1cc65dd206193c35d7e43 +Subproject commit 9fa06dac45d7a8eac7aeb478ac834d7596eb25a5 From b86c3ee8ced5eb39d0aced6b81d8a27836418f9c Mon Sep 17 00:00:00 2001 From: lguohan Date: Fri, 27 Jul 2018 12:36:23 -0700 Subject: [PATCH 032/180] [build]: add barefoot master build badge (#1881) --- README.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 20cc432cbbe6..6bc218bf00a7 100644 --- a/README.md +++ b/README.md @@ -1,4 +1,6 @@ -*master*: Broadcom: [![Broadcom](https://sonic-jenkins.westus2.cloudapp.azure.com/job/broadcom/job/buildimage-brcm-all/badge/icon)](https://sonic-jenkins.westus2.cloudapp.azure.com/job/broadcom/job/buildimage-brcm-all) +*master*: +Barefoot: [![Barefoot](https://sonic-jenkins.westus2.cloudapp.azure.com/job/barefoot/job/buildimage-bf-all/badge/icon)](https://sonic-jenkins.westus2.cloudapp.azure.com/job/barefoot/job/buildimage-bf-all) +Broadcom: [![Broadcom](https://sonic-jenkins.westus2.cloudapp.azure.com/job/broadcom/job/buildimage-brcm-all/badge/icon)](https://sonic-jenkins.westus2.cloudapp.azure.com/job/broadcom/job/buildimage-brcm-all) Mellanox: [![Mellanox](https://sonic-jenkins.westus2.cloudapp.azure.com/job/mellanox/job/buildimage-mlnx-all/badge/icon)](https://sonic-jenkins.westus2.cloudapp.azure.com/job/mellanox/job/buildimage-mlnx-all) Nephos: [![Nephos](https://sonic-jenkins.westus2.cloudapp.azure.com/job/nephos/job/buildimage-nephos-all/badge/icon)](https://sonic-jenkins.westus2.cloudapp.azure.com/job/nephos/job/buildimage-nephos-all) P4: [![P4](https://sonic-jenkins.westus2.cloudapp.azure.com/job/p4/job/buildimage-p4-all/badge/icon)](https://sonic-jenkins.westus2.cloudapp.azure.com/job/p4/job/buildimage-p4-all) From 77b899b1a03d25b655e79f6b07164fbcc3e2e971 Mon Sep 17 00:00:00 2001 From: Ying Xie Date: Fri, 27 Jul 2018 16:52:58 -0700 Subject: [PATCH 033/180] [submodule] advance sonic-linux-kernel submodule (#1882) - Include delta DPS1900 support - Make kernel build to fail on any error - Enable downloading pre-built kernel debian packages Signed-off-by: Ying Xie --- src/sonic-linux-kernel | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-linux-kernel b/src/sonic-linux-kernel index b511c96bcea0..61923df04554 160000 --- a/src/sonic-linux-kernel +++ b/src/sonic-linux-kernel @@ -1 +1 @@ -Subproject commit b511c96bcea09ae2b2adb3c3df7c4c41f14b6929 +Subproject commit 61923df04554c64107fc91c095016232fb1859a0 From c3c8f7fd7f62d09b1e8d3172e86601f6cd5ed0f1 Mon Sep 17 00:00:00 2001 From: Rodny Molina Date: Fri, 27 Jul 2018 17:46:33 -0700 Subject: [PATCH 034/180] Fix for bash's memory-leak (#1879) * Fix for bash's memory-leak Memory leak is observed during the execution of scripts that make use of bash-arrays. In scenarios where the offending script is executed on a regular basis (e.g. fancontrol), the leaking process may end up consuming most of the system resources. In this PR i'm replacing bash in all the contexts where it executes (both host and dockers). The official patch for this issue is here: https://ftp.gnu.org/gnu/bash/bash-4.3-patches/bash43-040 * Fixing minor issue during code-merge Signed-off-by: Rodny Molina --- files/build_templates/sonic_debian_extension.j2 | 5 +++++ rules/bash.mk | 17 +++++++++++++++++ rules/docker-base.mk | 1 + slave.mk | 1 + sonic-slave/Dockerfile | 5 ++++- src/bash/Makefile | 16 ++++++++++++++++ 6 files changed, 44 insertions(+), 1 deletion(-) create mode 100644 rules/bash.mk create mode 100644 src/bash/Makefile diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index 4580f3f7e741..02ac97ba2b9a 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -100,6 +100,11 @@ sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/python-click*_all.deb || \ sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/python-sonic-utilities_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f +# Install customized bash version to patch memory-leak issue. This instruction shall be removed +# once the migration to Debian-9 (Stretch) is completed. +sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/bash_*.deb || \ + sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f + # SONiC utilities installs bash-completion as a dependency. However, it is disabled by default # in bash.bashrc, so we copy a version of the file with it enabled here. sudo cp -f $IMAGE_CONFIGS/bash/bash.bashrc $FILESYSTEM_ROOT/etc/ diff --git a/rules/bash.mk b/rules/bash.mk new file mode 100644 index 000000000000..e31b237ae11b --- /dev/null +++ b/rules/bash.mk @@ -0,0 +1,17 @@ +# bash package +# +# Created to patch memory-leak issue in the bash-package included in Debian-8 (Jessie) +# release. This rule file, and the associated building-infra created to solve this +# bug (src/bash/), should be eliminated once the migration to Debian-9 (Stretch) is +# completed. + +# Bash major release-number corresponding to Debian-8 (Jessie) +BASH_VERSION_MAJOR = 4.3 +# Bash complete release-number. This image contains all 4.3 fixes up to patch '42'. +BASH_VERSION_FULL = $(BASH_VERSION_MAJOR)-14 + +export BASH_VERSION_MAJOR BASH_VERSION_FULL + +BASH = bash_$(BASH_VERSION_FULL)_amd64.deb +$(BASH)_SRC_PATH = $(SRC_PATH)/bash +SONIC_MAKE_DEBS += $(BASH) diff --git a/rules/docker-base.mk b/rules/docker-base.mk index 1bdaaa0b4de0..5ef06c7fc873 100644 --- a/rules/docker-base.mk +++ b/rules/docker-base.mk @@ -4,6 +4,7 @@ DOCKER_BASE = docker-base.gz $(DOCKER_BASE)_PATH = $(DOCKERS_PATH)/docker-base $(DOCKER_BASE)_DEPENDS += $(SUPERVISOR) $(DOCKER_BASE)_DEPENDS += $(LIBWRAP) +$(DOCKER_BASE)_DEPENDS += $(BASH) ifeq ($(SONIC_INSTALL_DEBUG_TOOLS),y) GDB = gdb diff --git a/slave.mk b/slave.mk index 9ba1732e6a58..722698b5c7cb 100644 --- a/slave.mk +++ b/slave.mk @@ -458,6 +458,7 @@ $(addprefix $(TARGET_PATH)/, $(SONIC_INSTALLERS)) : $(TARGET_PATH)/% : \ $(SONIC_DEVICE_DATA) \ $(PYTHON_CLICK) \ $(SONIC_UTILS) \ + $(BASH) \ $(LIBWRAP) \ $(LIBPAM_TACPLUS) \ $(LIBNSS_TACPLUS)) \ diff --git a/sonic-slave/Dockerfile b/sonic-slave/Dockerfile index 2737dab75f85..f66b3e07d7b0 100644 --- a/sonic-slave/Dockerfile +++ b/sonic-slave/Dockerfile @@ -226,7 +226,10 @@ RUN apt-get update && apt-get install -y \ python3-docutils \ python3-requests \ python3-pytest \ - python3-colorama + python3-colorama \ +# For bash + texi2html + # For linux build RUN apt-get -y build-dep linux diff --git a/src/bash/Makefile b/src/bash/Makefile new file mode 100644 index 000000000000..2e9f093aedb4 --- /dev/null +++ b/src/bash/Makefile @@ -0,0 +1,16 @@ +SHELL = /bin/bash +.ONESHELL: +.SHELLFLAGS += -e + +MAIN_TARGET = bash_$(BASH_VERSION_FULL)_amd64.deb + +$(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : + rm -rf bash-$(BASH_VERSION_MAJOR) + + dget -u https://launchpad.net/debian/+archive/primary/+sourcefiles/bash/$(BASH_VERSION_FULL)/bash_$(BASH_VERSION_FULL).dsc + + pushd bash-$(BASH_VERSION_MAJOR) + DEB_BUILD_OPTIONS=nocheck dpkg-buildpackage -us -uc -b -j$(SONIC_CONFIG_MAKE_JOBS) + popd + + mv $* $(DEST)/ From 81ee8fa34f99ce0474724b236ecbb2bf8fff5a2f Mon Sep 17 00:00:00 2001 From: lguohan Date: Fri, 27 Jul 2018 22:47:59 -0700 Subject: [PATCH 035/180] [platform]: add sonic port alias for mellanox SN2700 platform (#1883) --- .../ACS-MSN2700/port_config.ini | 66 +++++----- .../Mellanox-SN2700-D48C8/port_config.ini | 114 +++++++++--------- 2 files changed, 90 insertions(+), 90 deletions(-) diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/port_config.ini b/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/port_config.ini index 816bb0e94a70..1e1906ff0ef5 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/port_config.ini +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/port_config.ini @@ -1,33 +1,33 @@ -# name lanes -Ethernet0 0,1,2,3 -Ethernet4 4,5,6,7 -Ethernet8 8,9,10,11 -Ethernet12 12,13,14,15 -Ethernet16 16,17,18,19 -Ethernet20 20,21,22,23 -Ethernet24 24,25,26,27 -Ethernet28 28,29,30,31 -Ethernet32 32,33,34,35 -Ethernet36 36,37,38,39 -Ethernet40 40,41,42,43 -Ethernet44 44,45,46,47 -Ethernet48 48,49,50,51 -Ethernet52 52,53,54,55 -Ethernet56 56,57,58,59 -Ethernet60 60,61,62,63 -Ethernet64 64,65,66,67 -Ethernet68 68,69,70,71 -Ethernet72 72,73,74,75 -Ethernet76 76,77,78,79 -Ethernet80 80,81,82,83 -Ethernet84 84,85,86,87 -Ethernet88 88,89,90,91 -Ethernet92 92,93,94,95 -Ethernet96 96,97,98,99 -Ethernet100 100,101,102,103 -Ethernet104 104,105,106,107 -Ethernet108 108,109,110,111 -Ethernet112 112,113,114,115 -Ethernet116 116,117,118,119 -Ethernet120 120,121,122,123 -Ethernet124 124,125,126,127 +# name lanes alias +Ethernet0 0,1,2,3 etp1 +Ethernet4 4,5,6,7 etp2 +Ethernet8 8,9,10,11 etp3 +Ethernet12 12,13,14,15 etp4 +Ethernet16 16,17,18,19 etp5 +Ethernet20 20,21,22,23 etp6 +Ethernet24 24,25,26,27 etp7 +Ethernet28 28,29,30,31 etp8 +Ethernet32 32,33,34,35 etp9 +Ethernet36 36,37,38,39 etp10 +Ethernet40 40,41,42,43 etp11 +Ethernet44 44,45,46,47 etp12 +Ethernet48 48,49,50,51 etp13 +Ethernet52 52,53,54,55 etp14 +Ethernet56 56,57,58,59 etp15 +Ethernet60 60,61,62,63 etp16 +Ethernet64 64,65,66,67 etp17 +Ethernet68 68,69,70,71 etp18 +Ethernet72 72,73,74,75 etp19 +Ethernet76 76,77,78,79 etp20 +Ethernet80 80,81,82,83 etp21 +Ethernet84 84,85,86,87 etp22 +Ethernet88 88,89,90,91 etp23 +Ethernet92 92,93,94,95 etp24 +Ethernet96 96,97,98,99 etp25 +Ethernet100 100,101,102,103 etp26 +Ethernet104 104,105,106,107 etp27 +Ethernet108 108,109,110,111 etp28 +Ethernet112 112,113,114,115 etp29 +Ethernet116 116,117,118,119 etp30 +Ethernet120 120,121,122,123 etp31 +Ethernet124 124,125,126,127 etp32 diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/port_config.ini b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/port_config.ini index d54a31851614..ffe3fe0ce6d9 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/port_config.ini +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/port_config.ini @@ -1,57 +1,57 @@ -# name lanes speed -Ethernet0 0,1 50000 -Ethernet2 2,3 50000 -Ethernet4 4,5 50000 -Ethernet6 6,7 50000 -Ethernet8 8,9 50000 -Ethernet10 10,11 50000 -Ethernet12 12,13 50000 -Ethernet14 14,15 50000 -Ethernet16 16,17 50000 -Ethernet18 18,19 50000 -Ethernet20 20,21 50000 -Ethernet22 22,23 50000 -Ethernet24 24,25,26,27 100000 -Ethernet28 28,29,30,31 100000 -Ethernet32 32,33,34,35 100000 -Ethernet36 36,37,38,39 100000 -Ethernet40 40,41 50000 -Ethernet42 42,43 50000 -Ethernet44 44,45 50000 -Ethernet46 46,47 50000 -Ethernet48 48,49 50000 -Ethernet50 50,51 50000 -Ethernet52 52,53 50000 -Ethernet54 54,55 50000 -Ethernet56 56,57 50000 -Ethernet58 58,59 50000 -Ethernet60 60,61 50000 -Ethernet62 62,63 50000 -Ethernet64 64,65 50000 -Ethernet66 66,67 50000 -Ethernet68 68,69 50000 -Ethernet70 70,71 50000 -Ethernet72 72,73 50000 -Ethernet74 74,75 50000 -Ethernet76 76,77 50000 -Ethernet78 78,79 50000 -Ethernet80 80,81 50000 -Ethernet82 82,83 50000 -Ethernet84 84,85 50000 -Ethernet86 86,87 50000 -Ethernet88 88,89,90,91 100000 -Ethernet92 92,93,94,95 100000 -Ethernet96 96,97,98,99 100000 -Ethernet100 100,101,102,103 100000 -Ethernet104 104,105 50000 -Ethernet106 106,107 50000 -Ethernet108 108,109 50000 -Ethernet110 110,111 50000 -Ethernet112 112,113 50000 -Ethernet114 114,115 50000 -Ethernet116 116,117 50000 -Ethernet118 118,119 50000 -Ethernet120 120,121 50000 -Ethernet122 122,123 50000 -Ethernet124 124,125 50000 -Ethernet126 126,127 50000 +# name lanes speed alias +Ethernet0 0,1 50000 etp1a +Ethernet2 2,3 50000 etp1b +Ethernet4 4,5 50000 etp2a +Ethernet6 6,7 50000 etp2b +Ethernet8 8,9 50000 etp3a +Ethernet10 10,11 50000 etp3b +Ethernet12 12,13 50000 etp4a +Ethernet14 14,15 50000 etp4b +Ethernet16 16,17 50000 etp5a +Ethernet18 18,19 50000 etp5b +Ethernet20 20,21 50000 etp6a +Ethernet22 22,23 50000 etp6b +Ethernet24 24,25,26,27 100000 etp7 +Ethernet28 28,29,30,31 100000 etp8 +Ethernet32 32,33,34,35 100000 etp9 +Ethernet36 36,37,38,39 100000 etp10 +Ethernet40 40,41 50000 etp11a +Ethernet42 42,43 50000 etp11b +Ethernet44 44,45 50000 etp12a +Ethernet46 46,47 50000 etp12b +Ethernet48 48,49 50000 etp13a +Ethernet50 50,51 50000 etp13b +Ethernet52 52,53 50000 etp14a +Ethernet54 54,55 50000 etp14b +Ethernet56 56,57 50000 etp15a +Ethernet58 58,59 50000 etp15b +Ethernet60 60,61 50000 etp16a +Ethernet62 62,63 50000 etp16b +Ethernet64 64,65 50000 etp17a +Ethernet66 66,67 50000 etp17b +Ethernet68 68,69 50000 etp18a +Ethernet70 70,71 50000 etp18b +Ethernet72 72,73 50000 etp19a +Ethernet74 74,75 50000 etp19b +Ethernet76 76,77 50000 etp20a +Ethernet78 78,79 50000 etp20b +Ethernet80 80,81 50000 etp21a +Ethernet82 82,83 50000 etp21b +Ethernet84 84,85 50000 etp22a +Ethernet86 86,87 50000 etp22b +Ethernet88 88,89,90,91 100000 etp23 +Ethernet92 92,93,94,95 100000 etp24 +Ethernet96 96,97,98,99 100000 etp25 +Ethernet100 100,101,102,103 100000 etp26 +Ethernet104 104,105 50000 etp27a +Ethernet106 106,107 50000 etp27b +Ethernet108 108,109 50000 etp28a +Ethernet110 110,111 50000 etp28b +Ethernet112 112,113 50000 etp29a +Ethernet114 114,115 50000 etp29b +Ethernet116 116,117 50000 etp30a +Ethernet118 118,119 50000 etp30b +Ethernet120 120,121 50000 etp31a +Ethernet122 122,123 50000 etp31b +Ethernet124 124,125 50000 etp32a +Ethernet126 126,127 50000 etp32b From 5011622c6f50194b5dda03ecdeb31438613ae325 Mon Sep 17 00:00:00 2001 From: Sagar Balani Date: Mon, 30 Jul 2018 09:54:05 -0700 Subject: [PATCH 036/180] [platform]: bfn intf: allow-hotplug for usb0 interface (#1889) --- files/image_config/interfaces/interfaces-config.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/files/image_config/interfaces/interfaces-config.sh b/files/image_config/interfaces/interfaces-config.sh index b5b06904c508..29664bcda564 100755 --- a/files/image_config/interfaces/interfaces-config.sh +++ b/files/image_config/interfaces/interfaces-config.sh @@ -10,6 +10,7 @@ if [[ "$platform" == "x86_64-accton_wedge100bf_32x-r0" || "$platform" == "x86_64 cat <<'EOF' >> /etc/network/interfaces # BMC interface auto usb0 +allow-hotplug usb0 iface usb0 inet6 auto up ifconfig usb0 txqueuelen 64 EOF From d166a0150226cb060e1dfbda69d41eea84201648 Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Mon, 30 Jul 2018 10:33:53 -0700 Subject: [PATCH 037/180] [submodule] Update submodule: swss-common (#1885) --- src/sonic-swss-common | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-swss-common b/src/sonic-swss-common index 9fa06dac45d7..a2a2e3570fa5 160000 --- a/src/sonic-swss-common +++ b/src/sonic-swss-common @@ -1 +1 @@ -Subproject commit 9fa06dac45d7a8eac7aeb478ac834d7596eb25a5 +Subproject commit a2a2e3570fa58469c100689a907b50ff195b2266 From 530e2dc4e17eb737b157ef1bebce98a383a3fa3b Mon Sep 17 00:00:00 2001 From: Taoyu Li Date: Tue, 31 Jul 2018 12:50:54 -0700 Subject: [PATCH 038/180] Only keep most recent one in old_config (#1884) --- files/image_config/platform/rc.local | 1 + 1 file changed, 1 insertion(+) diff --git a/files/image_config/platform/rc.local b/files/image_config/platform/rc.local index b99ecdbcee9d..0db4278932f6 100755 --- a/files/image_config/platform/rc.local +++ b/files/image_config/platform/rc.local @@ -226,6 +226,7 @@ if [ -f $FIRST_BOOT_FILE ]; then # and create a flag in /tmp/ to let updategraph service know if [ -d /host/old_config ]; then mv -f /host/old_config /etc/sonic/ + rm -rf /etc/sonic/old_config/old_config touch /tmp/pending_config_migration elif [ -f /host/minigraph.xml ]; then mkdir -p /etc/sonic/old_config From d389c09335d6ac6925909729fc75ef4670ab8baa Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Tue, 31 Jul 2018 18:45:28 -0700 Subject: [PATCH 039/180] [submodule] Update submodule: swss-common (#1895) --- src/sonic-swss-common | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-swss-common b/src/sonic-swss-common index a2a2e3570fa5..051e08d79548 160000 --- a/src/sonic-swss-common +++ b/src/sonic-swss-common @@ -1 +1 @@ -Subproject commit a2a2e3570fa58469c100689a907b50ff195b2266 +Subproject commit 051e08d79548eb362c12d8800b5d2cb7bf8a1e41 From 2522565e15c4b9187f3c19b785171e176b930302 Mon Sep 17 00:00:00 2001 From: Samuel Angebault Date: Tue, 31 Jul 2018 22:11:57 -0700 Subject: [PATCH 040/180] [devices]: Move Arista bfn platforms under platform/barefoot (#1894) The work on Arista 7170 was originally submitted under platform/p4. Since the platform/barefoot was recently introduced, this is where this platform support needs to go. Signed-off-by: Samuel Angebault --- .gitmodules | 2 +- platform/barefoot/one-aboot.mk | 13 +++++++++++++ .../{p4 => barefoot}/platform-modules-arista.mk | 0 platform/barefoot/rules.mk | 5 ++++- .../{p4 => barefoot}/sonic-platform-modules-arista | 0 platform/p4/one-aboot.mk | 12 ------------ platform/p4/rules.mk | 2 -- 7 files changed, 18 insertions(+), 16 deletions(-) create mode 100644 platform/barefoot/one-aboot.mk rename platform/{p4 => barefoot}/platform-modules-arista.mk (100%) rename platform/{p4 => barefoot}/sonic-platform-modules-arista (100%) delete mode 100644 platform/p4/one-aboot.mk diff --git a/.gitmodules b/.gitmodules index bb4eae528c72..57cd558057fe 100755 --- a/.gitmodules +++ b/.gitmodules @@ -78,5 +78,5 @@ path = platform/broadcom/sonic-platform-modules-mitac url = https://github.com/MiTAC-EBU/sonic-platform-modules-mitac.git [submodule "platform/p4/sonic-platform-modules-arista"] - path = platform/p4/sonic-platform-modules-arista + path = platform/barefoot/sonic-platform-modules-arista url = https://github.com/aristanetworks/sonic diff --git a/platform/barefoot/one-aboot.mk b/platform/barefoot/one-aboot.mk new file mode 100644 index 000000000000..4c4a6b6f626a --- /dev/null +++ b/platform/barefoot/one-aboot.mk @@ -0,0 +1,13 @@ +# sonic one aboot installer + +SONIC_ONE_ABOOT_IMAGE = sonic-aboot-barefoot.swi +$(SONIC_ONE_ABOOT_IMAGE)_MACHINE = barefoot +$(SONIC_ONE_ABOOT_IMAGE)_IMAGE_TYPE = aboot +$(SONIC_ONE_ABOOT_IMAGE)_INSTALLS += $(BFN_PLATFORM_MODULE) +$(SONIC_ONE_ABOOT_IMAGE)_LAZY_INSTALLS += $(BFN_MONTARA_PLATFORM_MODULE) +$(SONIC_ONE_ABOOT_IMAGE)_INSTALLS += $(ARISTA_PLATFORM_MODULE_DRIVERS) \ + $(ARISTA_PLATFORM_MODULE_PYTHON2) \ + $(ARISTA_PLATFORM_MODULE_PYTHON3) \ + $(ARISTA_PLATFORM_MODULE) +$(SONIC_ONE_ABOOT_IMAGE)_DOCKERS += $(SONIC_INSTALL_DOCKER_IMAGES) +SONIC_INSTALLERS += $(SONIC_ONE_ABOOT_IMAGE) diff --git a/platform/p4/platform-modules-arista.mk b/platform/barefoot/platform-modules-arista.mk similarity index 100% rename from platform/p4/platform-modules-arista.mk rename to platform/barefoot/platform-modules-arista.mk diff --git a/platform/barefoot/rules.mk b/platform/barefoot/rules.mk index f10952dfadc2..2ee49adb8a0f 100644 --- a/platform/barefoot/rules.mk +++ b/platform/barefoot/rules.mk @@ -1,3 +1,4 @@ +include $(PLATFORM_PATH)/platform-modules-arista.mk include $(PLATFORM_PATH)/platform-modules-bfn.mk include $(PLATFORM_PATH)/platform-modules-bfn-montara.mk include $(PLATFORM_PATH)/platform-modules-wnc-osw1800.mk @@ -6,6 +7,7 @@ include $(PLATFORM_PATH)/bfn-sai.mk include $(PLATFORM_PATH)/docker-syncd-bfn.mk include $(PLATFORM_PATH)/docker-syncd-bfn-rpc.mk include $(PLATFORM_PATH)/docker-orchagent-bfn.mk +include $(PLATFORM_PATH)/one-aboot.mk include $(PLATFORM_PATH)/one-image.mk include $(PLATFORM_PATH)/libsaithrift-dev.mk include $(PLATFORM_PATH)/python-saithrift.mk @@ -13,7 +15,8 @@ include $(PLATFORM_PATH)/docker-ptf-bfn.mk include $(PLATFORM_PATH)/bfn-platform.mk include $(PLATFORM_PATH)/bfn-platform-wnc.mk include $(PLATFORM_PATH)/bfn-platform-ingrasys.mk -SONIC_ALL += $(SONIC_ONE_IMAGE) \ + +SONIC_ALL += $(SONIC_ONE_IMAGE) $(SONIC_ONE_ABOOT) \ $(DOCKER_FPM) # Inject sai into sairedis diff --git a/platform/p4/sonic-platform-modules-arista b/platform/barefoot/sonic-platform-modules-arista similarity index 100% rename from platform/p4/sonic-platform-modules-arista rename to platform/barefoot/sonic-platform-modules-arista diff --git a/platform/p4/one-aboot.mk b/platform/p4/one-aboot.mk deleted file mode 100644 index 95babf045c00..000000000000 --- a/platform/p4/one-aboot.mk +++ /dev/null @@ -1,12 +0,0 @@ -# sonic broadcom one image installer - -SONIC_ONE_ABOOT_IMAGE = sonic-aboot-p4.swi -$(SONIC_ONE_ABOOT_IMAGE)_MACHINE = p4 -$(SONIC_ONE_ABOOT_IMAGE)_IMAGE_TYPE = aboot -$(SONIC_ONE_ABOOT_IMAGE)_INSTALLS += $(ARISTA_PLATFORM_MODULE_DRIVERS) $(ARISTA_PLATFORM_MODULE_PYTHON2) $(ARISTA_PLATFORM_MODULE_PYTHON3) $(ARISTA_PLATFORM_MODULE) - -# FIXME: this is a temporary workaround for testing the platform driver -$(SONIC_ONE_ABOOT_IMAGE)_DOCKERS += docker-platform-monitor.gz -# $(SONIC_ONE_ABOOT_IMAGE)_DOCKERS += $(SONIC_INSTALL_DOCKER_IMAGES) - -SONIC_INSTALLERS += $(SONIC_ONE_ABOOT_IMAGE) diff --git a/platform/p4/rules.mk b/platform/p4/rules.mk index ea3e31e973e2..7fe6a60fadac 100644 --- a/platform/p4/rules.mk +++ b/platform/p4/rules.mk @@ -1,6 +1,4 @@ # include $(PLATFORM_PATH)/p4-softswitch.mk -include $(PLATFORM_PATH)/platform-modules-arista.mk -include $(PLATFORM_PATH)/one-aboot.mk include $(PLATFORM_PATH)/tenjin.mk include $(PLATFORM_PATH)/p4-hlir.mk include $(PLATFORM_PATH)/p4c-bm.mk From a8c41d9a66ff3e31d709c3aa9c321da6acf6969f Mon Sep 17 00:00:00 2001 From: yurypm Date: Wed, 1 Aug 2018 22:47:36 +0100 Subject: [PATCH 041/180] [device] Update arista driver submodule (#1897) --- .gitmodules | 2 +- platform/barefoot/platform-modules-arista.mk | 1 + platform/barefoot/sonic-platform-modules-arista | 2 +- platform/broadcom/sonic-platform-modules-arista | 2 +- 4 files changed, 4 insertions(+), 3 deletions(-) diff --git a/.gitmodules b/.gitmodules index 57cd558057fe..b36e0f3e8865 100755 --- a/.gitmodules +++ b/.gitmodules @@ -77,6 +77,6 @@ [submodule "platform/broadcom/sonic-platform-modules-mitac"] path = platform/broadcom/sonic-platform-modules-mitac url = https://github.com/MiTAC-EBU/sonic-platform-modules-mitac.git -[submodule "platform/p4/sonic-platform-modules-arista"] +[submodule "platform/barefoot/sonic-platform-modules-arista"] path = platform/barefoot/sonic-platform-modules-arista url = https://github.com/aristanetworks/sonic diff --git a/platform/barefoot/platform-modules-arista.mk b/platform/barefoot/platform-modules-arista.mk index ec7566318c8d..633435c0550a 100644 --- a/platform/barefoot/platform-modules-arista.mk +++ b/platform/barefoot/platform-modules-arista.mk @@ -20,3 +20,4 @@ $(eval $(call add_extra_package,$(ARISTA_PLATFORM_MODULE),$(ARISTA_PLATFORM_MODU export ARISTA_PLATFORM_MODULE ARISTA_PLATFORM_MODULE_PYTHON2 ARISTA_PLATFORM_MODULE_PYTHON3 ARISTA_PLATFORM_MODULE_DRIVERS +export ARISTA_SCD_DRIVER_CONFIG=m diff --git a/platform/barefoot/sonic-platform-modules-arista b/platform/barefoot/sonic-platform-modules-arista index 02b22ae91135..98b983c32da2 160000 --- a/platform/barefoot/sonic-platform-modules-arista +++ b/platform/barefoot/sonic-platform-modules-arista @@ -1 +1 @@ -Subproject commit 02b22ae91135d4e4a9e11e06656dcff3056e2c7f +Subproject commit 98b983c32da28eaf35f9991d6dc1f6aca00d9335 diff --git a/platform/broadcom/sonic-platform-modules-arista b/platform/broadcom/sonic-platform-modules-arista index c114bb1f903a..98b983c32da2 160000 --- a/platform/broadcom/sonic-platform-modules-arista +++ b/platform/broadcom/sonic-platform-modules-arista @@ -1 +1 @@ -Subproject commit c114bb1f903a5630c3a02d450a026949c323defd +Subproject commit 98b983c32da28eaf35f9991d6dc1f6aca00d9335 From 8e74230e864de8066b4033421b62cc40dcc12e4b Mon Sep 17 00:00:00 2001 From: Feng Lee Date: Thu, 2 Aug 2018 08:02:48 +0800 Subject: [PATCH 042/180] [Ingrasys] Add platform support for S9180-32X/S9280-64X with Barefoot ASIC on master branch (#1880) * delete barefoot sonic-platform-modules-ingrasys * add submodule for barefoot sonic-platform-modules-ingrasys * add barefoot platform supports on master branch * change the default speed from 40G to 100G * remove barefoot sonic-platform-modules-ingrasys submodule * add ingrasys s9180-32x, s9280-64x barefoot platform drivers * update s9280-64x vdd core voltage * update ingrasys barefoot platform debian rules --- .../minigraph.xml | 4 +- .../x86_64-ingrasys_s9180_32x-r0/sensors.conf | 6 +- .../INGRASYS-S9280-64X/port_config.ini | 65 + .../INGRASYS-S9280-64X/switch-sai.conf | 33 + .../x86_64-ingrasys_s9280_64x-r0/fancontrol | 9 + .../installer.conf | 3 + .../minigraph.xml | 151 ++ .../plugins/eeprom.py | 22 + .../plugins/psuutil.py | 93 + .../plugins/sfputil.py | 300 +++ .../x86_64-ingrasys_s9280_64x-r0/sensors.conf | 85 + platform/barefoot/bfn-platform-ingrasys.mk | 4 +- platform/barefoot/one-image.mk | 1 + .../barefoot/platform-modules-ingrasys.mk | 7 + .../debian/changelog | 8 +- .../debian/control | 4 + .../debian/rules | 77 +- .../sonic-platform-ingrasys-s9180-32x.dirs | 4 - .../sonic-platform-ingrasys-s9180-32x.init | 41 + .../sonic-platform-ingrasys-s9180-32x.install | 4 - ...sonic-platform-ingrasys-s9180-32x.postinst | 57 - .../sonic-platform-ingrasys-s9180-32x.postrm | 42 - .../sonic-platform-ingrasys-s9180-32x.prerm | 21 - .../sonic-platform-ingrasys-s9180-32x.upstart | 7 - .../sonic-platform-ingrasys-s9280-64x.init | 41 + .../s9180-32x/modules/Makefile | 2 + .../s9180-32x/modules/cpld_wdt.c | 296 +++ .../s9180-32x/service/bfn.service | 13 - .../s9180-32x/utils/bfn | 44 - .../s9180-32x/utils/i2c_utils.sh | 42 +- .../s9180-32x/utils/s9180_32x_monitor.sh | 3 +- .../s9280-64x/README.md | 175 ++ .../s9280-64x/modules/Makefile | 3 + .../s9280-64x/modules/eeprom_mb.c | 267 +++ .../modules/ingrasys_s9280_64x_i2c_cpld.c | 1618 +++++++++++++++ .../modules/ingrasys_s9280_64x_i2c_cpld.h | 338 +++ .../modules/ingrasys_s9280_64x_platform.h | 158 ++ .../modules/ingrasys_s9280_64x_psu.c | 394 ++++ .../s9280-64x/service/qsfp-monitor.service | 15 + .../service/s9280-64x-monitor.service | 19 + .../s9280-64x/utils/i2c_utils.sh | 1844 +++++++++++++++++ .../s9280-64x/utils/qsfp_monitor.sh | 105 + .../s9280-64x/utils/s9280_64x_monitor.sh | 42 + 43 files changed, 6199 insertions(+), 268 deletions(-) create mode 100644 device/ingrasys/x86_64-ingrasys_s9280_64x-r0/INGRASYS-S9280-64X/port_config.ini create mode 100644 device/ingrasys/x86_64-ingrasys_s9280_64x-r0/INGRASYS-S9280-64X/switch-sai.conf create mode 100644 device/ingrasys/x86_64-ingrasys_s9280_64x-r0/fancontrol create mode 100644 device/ingrasys/x86_64-ingrasys_s9280_64x-r0/installer.conf create mode 100644 device/ingrasys/x86_64-ingrasys_s9280_64x-r0/minigraph.xml create mode 100644 device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/eeprom.py create mode 100644 device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/psuutil.py create mode 100644 device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/sfputil.py create mode 100644 device/ingrasys/x86_64-ingrasys_s9280_64x-r0/sensors.conf delete mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.dirs create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.init delete mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.install delete mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postinst delete mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postrm delete mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.prerm delete mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.upstart create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9280-64x.init create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/cpld_wdt.c delete mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/bfn.service delete mode 100755 platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/bfn create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/README.md create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/Makefile create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/eeprom_mb.c create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_i2c_cpld.c create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_i2c_cpld.h create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_platform.h create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_psu.c create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/service/qsfp-monitor.service create mode 100644 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/service/s9280-64x-monitor.service create mode 100755 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/i2c_utils.sh create mode 100755 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/qsfp_monitor.sh create mode 100755 platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/s9280_64x_monitor.sh diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/minigraph.xml b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/minigraph.xml index e2d151e6ec47..803ae39d22c2 100644 --- a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/minigraph.xml +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/minigraph.xml @@ -93,7 +93,7 @@ - 40000 + 100000 DeviceInterfaceLink OCPSCH0104001MS Ethernet24 @@ -101,7 +101,7 @@ Ethernet0 - 40000 + 100000 DeviceInterfaceLink OCPSCH0104002MS Ethernet24 diff --git a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/sensors.conf b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/sensors.conf index eb5a5b4b69f3..eb991d771d15 100644 --- a/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/sensors.conf +++ b/device/ingrasys/x86_64-ingrasys_s9180_32x-r0/sensors.conf @@ -40,9 +40,9 @@ chip "w83795adg-*" label in0 "0.9V" set in0_max 0.927 set in0_min 0.873 - label in1 "0.86V" - set in1_max 0.877 - set in1_min 0.843 + label in1 "VDD" + set in1_max 0.962 + set in1_min 0.717 ignore in2 ignore in3 ignore in4 diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/INGRASYS-S9280-64X/port_config.ini b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/INGRASYS-S9280-64X/port_config.ini new file mode 100644 index 000000000000..749f9f484a3d --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/INGRASYS-S9280-64X/port_config.ini @@ -0,0 +1,65 @@ +# name lanes alias speed autoneg fec index +Ethernet0 0,1,2,3 Ethernet0 100000 0 0 0 +Ethernet4 4,5,6,7 Ethernet4 100000 0 0 1 +Ethernet8 8,9,10,11 Ethernet8 100000 0 0 2 +Ethernet12 12,13,14,15 Ethernet12 100000 0 0 3 +Ethernet16 16,17,18,19 Ethernet16 100000 0 0 4 +Ethernet20 20,21,22,23 Ethernet20 100000 0 0 5 +Ethernet24 24,25,26,27 Ethernet24 100000 0 0 6 +Ethernet28 28,29,30,31 Ethernet28 100000 0 0 7 +Ethernet32 32,33,34,35 Ethernet32 100000 0 0 8 +Ethernet36 36,37,38,39 Ethernet36 100000 0 0 9 +Ethernet40 40,41,42,43 Ethernet40 100000 0 0 10 +Ethernet44 44,45,46,47 Ethernet44 100000 0 0 11 +Ethernet48 48,49,50,51 Ethernet48 100000 0 0 12 +Ethernet52 52,53,54,55 Ethernet52 100000 0 0 13 +Ethernet56 56,57,58,59 Ethernet56 100000 0 0 14 +Ethernet60 60,61,62,63 Ethernet60 100000 0 0 15 +Ethernet64 64,65,66,67 Ethernet64 100000 0 0 16 +Ethernet68 68,69,70,71 Ethernet68 100000 0 0 17 +Ethernet72 72,73,74,75 Ethernet72 100000 0 0 18 +Ethernet76 76,77,78,79 Ethernet76 100000 0 0 19 +Ethernet80 80,81,82,83 Ethernet80 100000 0 0 20 +Ethernet84 84,85,86,87 Ethernet84 100000 0 0 21 +Ethernet88 88,89,90,91 Ethernet88 100000 0 0 22 +Ethernet92 92,93,94,95 Ethernet92 100000 0 0 23 +Ethernet96 96,97,98,99 Ethernet96 100000 0 0 24 +Ethernet100 100,101,102,103 Ethernet100 100000 0 0 25 +Ethernet104 104,105,106,107 Ethernet104 100000 0 0 26 +Ethernet108 108,109,110,111 Ethernet108 100000 0 0 27 +Ethernet112 112,113,114,115 Ethernet112 100000 0 0 28 +Ethernet116 116,117,118,119 Ethernet116 100000 0 0 29 +Ethernet120 120,121,122,123 Ethernet120 100000 0 0 30 +Ethernet124 124,125,126,127 Ethernet124 100000 0 0 31 +Ethernet128 128,129,130,131 Ethernet128 100000 0 0 32 +Ethernet132 132,133,134,135 Ethernet132 100000 0 0 33 +Ethernet136 136,137,138,139 Ethernet136 100000 0 0 34 +Ethernet140 140,141,142,143 Ethernet140 100000 0 0 35 +Ethernet144 144,145,146,147 Ethernet144 100000 0 0 36 +Ethernet148 148,149,150,151 Ethernet148 100000 0 0 37 +Ethernet152 152,153,154,155 Ethernet152 100000 0 0 38 +Ethernet156 156,157,158,159 Ethernet156 100000 0 0 39 +Ethernet160 160,161,162,163 Ethernet160 100000 0 0 40 +Ethernet164 164,165,166,167 Ethernet164 100000 0 0 41 +Ethernet168 168,169,170,171 Ethernet168 100000 0 0 42 +Ethernet172 172,173,174,175 Ethernet172 100000 0 0 43 +Ethernet176 176,177,178,179 Ethernet176 100000 0 0 44 +Ethernet180 180,181,182,183 Ethernet180 100000 0 0 45 +Ethernet184 184,185,186,187 Ethernet184 100000 0 0 46 +Ethernet188 188,189,190,191 Ethernet188 100000 0 0 47 +Ethernet192 192,193,194,195 Ethernet192 100000 0 0 48 +Ethernet196 196,197,198,199 Ethernet196 100000 0 0 49 +Ethernet200 200,201,202,203 Ethernet200 100000 0 0 50 +Ethernet204 204,205,206,207 Ethernet204 100000 0 0 51 +Ethernet208 208,209,210,211 Ethernet208 100000 0 0 52 +Ethernet212 212,213,214,215 Ethernet212 100000 0 0 53 +Ethernet216 216,217,218,219 Ethernet216 100000 0 0 54 +Ethernet220 220,221,222,223 Ethernet220 100000 0 0 55 +Ethernet224 224,225,226,227 Ethernet224 100000 0 0 56 +Ethernet228 228,229,230,231 Ethernet228 100000 0 0 57 +Ethernet232 232,233,234,235 Ethernet232 100000 0 0 58 +Ethernet236 236,237,238,239 Ethernet236 100000 0 0 59 +Ethernet240 240,241,242,243 Ethernet240 100000 0 0 60 +Ethernet244 244,245,246,247 Ethernet244 100000 0 0 61 +Ethernet248 248,249,250,251 Ethernet248 100000 0 0 62 +Ethernet252 252,253,254,255 Ethernet252 100000 0 0 63 diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/INGRASYS-S9280-64X/switch-sai.conf b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/INGRASYS-S9280-64X/switch-sai.conf new file mode 100644 index 000000000000..224d1fc58b18 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/INGRASYS-S9280-64X/switch-sai.conf @@ -0,0 +1,33 @@ +{ + "chip_list": [ + { + "id": "asic-0", + "chip_family": "Tofino", + "instance": 0, + "pcie_sysfs_prefix": "/sys/devices/pci0000:00/0000:00:03.0/0000:05:00.0", + "pcie_domain": 0, + "pcie_bus": 5, + "pcie_fn": 0, + "pcie_dev": 0, + "pcie_int_mode": 1, + "sds_fw_path": "share/tofino_sds_fw/avago/firmware" + } + ], + "instance": 0, + "p4_program_list": [ + { + "id": "pgm-0", + "instance": 0, + "path": "switch", + "program-name": "switch", + "pd": "lib/tofinopd/switch/libpd.so", + "pd-thrift": "lib/tofinopd/switch/libpdthrift.so", + "table-config": "share/tofinopd/switch/context.json", + "tofino-bin": "share/tofinopd/switch/tofino.bin", + "switchapi": "lib/libswitchapi.so", + "switchsai": "lib/libswitchsai.so", + "agent0": "lib/platform/x86_64-ingrasys_s9280_64x-r0/libpltfm_mgr.so", + "switchapi_port_add": false + } + ] +} diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/fancontrol b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/fancontrol new file mode 100644 index 000000000000..c131df9df32c --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/fancontrol @@ -0,0 +1,9 @@ +INTERVAL=10 +DEVPATH=hwmon1=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-16/16-002f hwmon3=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-6/6-004e +DEVNAME=hwmon1=w83795adg +FCTEMPS=hwmon1/device/pwm2=hwmon3/temp1_input +FCFANS=hwmon1/device/pwm2=hwmon1/device/fan7_input hwmon1/device/pwm2=hwmon1/device/fan5_input hwmon1/device/pwm2=hwmon1/device/fan3_input hwmon1/device/pwm2=hwmon1/device/fan1_input +MINTEMP=hwmon1/device/pwm2=20 +MAXTEMP=hwmon1/device/pwm2=60 +MINSTART=hwmon1/device/pwm2=75 +MINSTOP=hwmon1/device/pwm2=22 diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/installer.conf b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/installer.conf new file mode 100644 index 000000000000..925a32fc0c3a --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/installer.conf @@ -0,0 +1,3 @@ +CONSOLE_PORT=0x3f8 +CONSOLE_DEV=0 +CONSOLE_SPEED=115200 diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/minigraph.xml b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/minigraph.xml new file mode 100644 index 000000000000..ffc71df148e5 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/minigraph.xml @@ -0,0 +1,151 @@ + + + + + + OCPSCH0104001MS + 10.10.1.26 + OCPSCH01040GGLF + 10.10.1.25 + 1 + 10 + 3 + + + OCPSCH0104002MS + 10.10.2.26 + OCPSCH01040GGLF + 10.10.2.25 + 1 + 10 + 3 + + + + + 64536 + OCPSCH01040GGLF + + +
10.10.1.26
+ + + + +
10.10.2.26
+ + + + + + + + 64542 + OCPSCH0104001MS + + + + 64543 + OCPSCH0104002MS + + + + + + + + + + HostIP + Loopback0 + + 100.0.0.9/32 + + 100.0.0.9/32 + + + + + + + + OCPSCH01040GGLF + + + + + + Ethernet0 + 10.10.1.25/30 + + + + Ethernet4 + 10.10.2.25/30 + + + + + + + + + + + + 100000 + DeviceInterfaceLink + OCPSCH0104001MS + Ethernet24 + OCPSCH01040GGLF + Ethernet0 + + + 100000 + DeviceInterfaceLink + OCPSCH0104002MS + Ethernet24 + OCPSCH01040GGLF + Ethernet4 + + + + + OCPSCH01040GGLF + INGRASYS-S9280-64X + + + + + + + OCPSCH01040GGLF + + + DhcpResources + + + + + NtpResources + + 0.debian.pool.ntp.org;1.debian.pool.ntp.org;2.debian.pool.ntp.org;3.debian.pool.ntp.org + + + SyslogResources + + + + + ErspanDestinationIpv4 + + 2.2.2.2 + + + + + + + OCPSCH01040GGLF + INGRASYS-S9280-64X + diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/eeprom.py b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/eeprom.py new file mode 100644 index 000000000000..ecf171539843 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/eeprom.py @@ -0,0 +1,22 @@ +#!/usr/bin/env python + +############################################################################# +# Ingrasys S9280-64X +# +# Platform and model specific eeprom subclass, inherits from the base class, +# and provides the followings: +# - the eeprom format definition +# - specific encoder/decoder if there is special need +############################################################################# + +try: + from sonic_eeprom import eeprom_tlvinfo +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + + +class board(eeprom_tlvinfo.TlvInfoDecoder): + + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/sys/class/i2c-adapter/i2c-0/0-0051/eeprom" + super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/psuutil.py b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/psuutil.py new file mode 100644 index 000000000000..c4b78c943e81 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/psuutil.py @@ -0,0 +1,93 @@ +# +# psuutil.py +# Platform-specific PSU status interface for SONiC +# + + +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError(str(e) + "- required module not found") + + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + # TODO: need to check if the patch mapping correct + SYSFS_PSU_DIR = ["/sys/bus/i2c/devices/i2c-18/18-0050", + "/sys/bus/i2c/devices/i2c-17/17-0050"] + + def __init__(self): + PsuBase.__init__(self) + + + # Get sysfs attribute + def get_attr_value(self, attr_path): + + retval = 'ERR' + if (not os.path.isfile(attr_path)): + return retval + + try: + with open(attr_path, 'r') as fd: + retval = fd.read() + except Exception as error: + logging.error("Unable to open ", attr_path, " file !") + + retval = retval.rstrip('\r\n') + return retval + + def get_num_psus(self): + """ + Retrieves the number of PSUs available on the device + :return: An integer, the number of PSUs available on the device + """ + MAX_PSUS = 2 + return MAX_PSUS + + def get_psu_status(self, index): + """ + Retrieves the oprational status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is operating properly, False if PSU is\ + faulty + """ + status = 0 + attr_file = 'psu_pg' + attr_path = self.SYSFS_PSU_DIR[index-1] +'/' + attr_file + + attr_value = self.get_attr_value(attr_path) + + if (attr_value != 'ERR'): + attr_value = int(attr_value, 16) + # Check for PSU status + if (attr_value == 1): + status = 1 + + return status + + def get_psu_presence(self, index): + """ + Retrieves the presence status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is plugged, False if not + """ + status = 0 + psu_absent = 0 + attr_file ='psu_abs' + attr_path = self.SYSFS_PSU_DIR[index-1] +'/' + attr_file + + attr_value = self.get_attr_value(attr_path) + + if (attr_value != 'ERR'): + attr_value = int(attr_value, 16) + # Check for PSU presence + if (attr_value == 0): + status = 1 + + return status + diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/sfputil.py b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/sfputil.py new file mode 100644 index 000000000000..d9ef84c331c5 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/plugins/sfputil.py @@ -0,0 +1,300 @@ +# sfputil.py +# +# Platform-specific SFP transceiver interface for SONiC +# + +try: + import time + from sonic_sfp.sfputilbase import SfpUtilBase +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + + PORT_START = 0 + PORT_END = 63 + PORTS_IN_BLOCK = 64 + EEPROM_OFFSET = 41 + CPLD1_PORTS = 12 + CPLDx_PORTS = 13 + #TODO: check init sequence for CPLD i2c bus + CPLD_OFFSET = 1 + CPLD_PRES_BIT = 1 + CPLD_RESET_BIT = 0 + CPLD_LPMOD_BIT = 2 + CPLDx_I2C_ADDR = "33" + EEPROM_I2C_ADDR = "50" + CPLD_PORT_STATUS_KEY = "cpld_qsfp_port_status" + CPLD_PORT_CONFIG_KEY = "cpld_qsfp_port_config" + CPLD_REG_PATH = "/sys/bus/i2c/devices/{0}-00{1}/{2}_{3}" + + _port_to_eeprom_mapping = {} + + #TODO: check the fp port to phy port mapping + _fp2phy_port_mapping = { + 0: 0, + 1: 1, + 2: 4, + 3: 5, + 4: 8, + 5: 9, + 6: 12, + 7: 13, + 8: 16, + 9: 17, + 10: 20, + 11: 21, + 12: 24, + 13: 25, + 14: 28, + 15: 29, + 16: 32, + 17: 33, + 18: 36, + 19: 37, + 20: 40, + 21: 41, + 22: 44, + 23: 45, + 24: 48, + 25: 49, + 26: 52, + 27: 53, + 28: 56, + 29: 57, + 30: 60, + 31: 61, + 32: 2, + 33: 3, + 34: 6, + 35: 7, + 36: 10, + 37: 11, + 38: 14, + 39: 15, + 40: 18, + 41: 19, + 42: 22, + 43: 23, + 44: 26, + 45: 27, + 46: 30, + 47: 31, + 48: 34, + 49: 35, + 50: 38, + 51: 39, + 52: 42, + 53: 43, + 54: 46, + 55: 47, + 56: 50, + 57: 51, + 58: 54, + 59: 55, + 60: 58, + 61: 59, + 62: 62, + 63: 63 + } + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_ports(self): + return range(0, self.PORTS_IN_BLOCK + 1) + + @property + def port_to_eeprom_mapping(self): + return self._port_to_eeprom_mapping + + + def __init__(self): + # Override port_to_eeprom_mapping for class initialization + eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-00{1}/eeprom" + for x in range(self.port_start, self.port_end + 1): + phy_port = self.fp2phy_port_num(x) + port_eeprom_path = eeprom_path.format(phy_port + self.EEPROM_OFFSET, self.EEPROM_I2C_ADDR) + self.port_to_eeprom_mapping[x] = port_eeprom_path + + SfpUtilBase.__init__(self) + + def qsfp_to_cpld_index(self, port_num): + if port_num < self.CPLD1_PORTS: + cpld_id = 0 + cpld_port_index = port_num + 1 + else: + cpld_id = 1 + (port_num - self.CPLD1_PORTS) / self.CPLDx_PORTS + cpld_port_index = ((port_num - self.CPLD1_PORTS) % self.CPLDx_PORTS) + 1 + return cpld_id, cpld_port_index + + def fp2phy_port_num(self, fp_port_num): + + phy_port_num = self._fp2phy_port_mapping[fp_port_num] + return phy_port_num + + def get_presence(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + # logic port to physical port mapping + port_num = self.fp2phy_port_num(port_num) + + cpld_id, cpld_port_index = self.qsfp_to_cpld_index(port_num) + i2c_id = self.CPLD_OFFSET + cpld_id + reg_path = self.CPLD_REG_PATH.format(i2c_id, self.CPLDx_I2C_ADDR, \ + self.CPLD_PORT_STATUS_KEY, cpld_port_index) + + try: + reg_file = open(reg_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + # content is a string containing the status register value + content = reg_file.readline().rstrip() + reg_file.close() + + reg_value = int(content, 16) + # mask for presence bit (bit 1) + mask = (1 << self.CPLD_PRES_BIT) + + # 0 - presence, 1 - absence + if reg_value & mask == 0: + return True + + return False + + def get_low_power_mode(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + # logic port to physical port mapping + port_num = self.fp2phy_port_num(port_num) + + cpld_id, cpld_port_index = self.qsfp_to_cpld_index(port_num) + i2c_id = self.CPLD_OFFSET + cpld_id + reg_path = self.CPLD_REG_PATH.format(i2c_id, self.CPLDx_I2C_ADDR, \ + self.CPLD_PORT_CONFIG_KEY, cpld_port_index) + + try: + reg_file = open(reg_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + # content is a string containing the status register value + content = reg_file.readline().rstrip() + reg_file.close() + + reg_value = int(content, 16) + # mask for lp_mod bit (bit 2) + mask = (1 << self.CPLD_LPMOD_BIT) + + # 0 - disable, 1 - low power mode + if reg_value & mask == 0: + return False + + return True + + def set_low_power_mode(self, port_num, lpmode): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + # logic port to physical port mapping + port_num = self.fp2phy_port_num(port_num) + + cpld_id, cpld_port_index = self.qsfp_to_cpld_index(port_num) + i2c_id = self.CPLD_OFFSET + cpld_id + reg_path = self.CPLD_REG_PATH.format(i2c_id, self.CPLDx_I2C_ADDR, \ + self.CPLD_PORT_CONFIG_KEY, cpld_port_index) + + try: + reg_file = open(reg_path, "r+") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + # content is a string containing the status register value + content = reg_file.readline().rstrip() + reg_value = int(content, 16) + # mask for lp_mod bit (bit 2) + mask = (1 << self.CPLD_LPMOD_BIT) + + # 1 - low power mode, 0 - high power mode + if lpmode is True: + reg_value = reg_value | mask + else: + reg_value = reg_value & ~mask + + # convert value to hex string + content = hex(reg_value) + + reg_file.seek(0) + reg_file.write(content) + reg_file.close() + + return True + + def reset(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + # logic port to physical port mapping + port_num = self.fp2phy_port_num(port_num) + + cpld_id, cpld_port_index = self.qsfp_to_cpld_index(port_num) + i2c_id = self.CPLD_OFFSET + cpld_id + reg_path = self.CPLD_REG_PATH.format(i2c_id, self.CPLDx_I2C_ADDR, \ + self.CPLD_PORT_CONFIG_KEY, cpld_port_index) + + # reset the port + try: + reg_file = open(reg_path, "r+") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + # content is a string containing the status register value + content = reg_file.readline().rstrip() + reg_value = int(content, 16) + # mask for reset bit (bit 0) + mask = (1 << self.CPLD_RESET_BIT) + + # 1 - out of reset, 0 - reset + reg_value = reg_value & ~mask + + reg_file.seek(0) + reg_file.write(hex(reg_value)) + reg_file.close() + + # Sleep 1 second to reset done + time.sleep(1) + + # take the port out of reset + try: + reg_file = open(reg_path, "w") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + reg_value = reg_value | mask + + reg_file.seek(0) + reg_file.write(hex(reg_value)) + reg_file.close() + + return True + diff --git a/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/sensors.conf b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/sensors.conf new file mode 100644 index 000000000000..ddc04a5f4ad6 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9280_64x-r0/sensors.conf @@ -0,0 +1,85 @@ +# libsensors configuration file +chip "i350bb-*" + ignore loc1 + +chip "jc42-*" + +bus "i2c-16" "i2c-mux-1 (chan_id 7)" +chip "w83795adg-*" + ignore in0 + label in1 "VDD_CORE" + set in1_min 0.717 + set in1_max 0.962 + ignore in2 + ignore in3 + label in4 "3.3V" + compute in4 @/(0.3052), (0.3052)*@ + set in4_min 3.3 * 0.95 + set in4_max 3.3 * 1.05 + label in5 "0.9V" + set in5_min 0.90 * 0.98 + set in5_max 0.90 * 1.02 + ignore in6 + ignore in7 + ignore in8 + ignore in9 + ignore in10 + ignore in11 + ignore in12 + ignore in13 + ignore in14 + ignore in15 + ignore in16 + ignore in17 + ignore in18 + ignore in19 + label fan1 "FANTRAY 1" + ignore fan2 + label fan3 "FANTRAY 2" + ignore fan4 + label fan5 "FANTRAY 3" + ignore fan6 + label fan7 "FANTRAY 4" + ignore fan8 + ignore temp1 + ignore temp2 + ignore temp3 + ignore temp4 + ignore temp5 + ignore temp6 + ignore intrusion0 + +chip "tmp75-i2c-*-4A" + label temp1 "BMC Board Temp" + set temp1_max 50 + set temp1_max_hyst 45 + +bus "i2c-0" "SMBus I801 adapter at f000" +chip "tmp75-i2c-*-4F" + label temp1 "x86 CPU Board Temp" + set temp1_max 50 + set temp1_max_hyst 45 + +bus "i2c-6" "i2c-0-mux (chan_id 5)" +chip "lm75-i2c-6-4D" + label temp1 "Rear Panel Temp" + set temp1_max 50 + set temp1_max_hyst 45 +chip "lm75-i2c-6-4E" + label temp1 "Rear MAC Temp" + set temp1_max 50 + set temp1_max_hyst 45 +chip "lm86-i2c-6-4C" + label temp1 "MB Temp" + set temp1_max 50 + label temp2 "MAC Temp" + set temp2_max 70 +bus "i2c-7" "i2c-0-mux (chan_id 6)" +chip "lm75-i2c-7-4D" + label temp1 "Front Panel Temp" + set temp1_max 50 + set temp1_max_hyst 45 +chip "lm75-i2c-7-4E" + label temp1 "Front MAC Temp" + set temp1_max 50 + set temp1_max_hyst 45 diff --git a/platform/barefoot/bfn-platform-ingrasys.mk b/platform/barefoot/bfn-platform-ingrasys.mk index a85d69baab79..7f3ba4746572 100644 --- a/platform/barefoot/bfn-platform-ingrasys.mk +++ b/platform/barefoot/bfn-platform-ingrasys.mk @@ -1,5 +1,5 @@ -BFN_INGRASYS_PLATFORM = bfnplatform-ingrasys_1.0.0_amd64.deb -$(BFN_INGRASYS_PLATFORM)_URL = "https://github.com/Ingrasys-sonic/packages/raw/master/lib/bfnplatform-ingrasys_1.0.0_amd64.deb" +BFN_INGRASYS_PLATFORM = bfnplatform-ingrasys_8.2.0_amd64.deb +$(BFN_INGRASYS_PLATFORM)_URL = "https://github.com/Ingrasys-sonic/packages/raw/master/lib/bfnplatform-ingrasys_8.2.0_amd64.deb" SONIC_ONLINE_DEBS += $(BFN_INGRASYS_PLATFORM) # $(BFN_SAI_DEV) $(BFN_SAI_DEV)_DEPENDS += $(BFN_INGRASYS_PLATFORM) diff --git a/platform/barefoot/one-image.mk b/platform/barefoot/one-image.mk index a7b5d009516d..490712f6818e 100644 --- a/platform/barefoot/one-image.mk +++ b/platform/barefoot/one-image.mk @@ -7,5 +7,6 @@ $(SONIC_ONE_IMAGE)_INSTALLS += $(BFN_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(BFN_MONTARA_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(WNC_OSW1800_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(INGRASYS_S9180_32X_PLATFORM_MODULE) +$(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(INGRASYS_S9280_64X_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_DOCKERS += $(SONIC_INSTALL_DOCKER_IMAGES) SONIC_INSTALLERS += $(SONIC_ONE_IMAGE) diff --git a/platform/barefoot/platform-modules-ingrasys.mk b/platform/barefoot/platform-modules-ingrasys.mk index 7204adb7e02d..5145dcbc5ffa 100644 --- a/platform/barefoot/platform-modules-ingrasys.mk +++ b/platform/barefoot/platform-modules-ingrasys.mk @@ -1,11 +1,18 @@ # Ingrasys S9180-32X Platform modules INGRASYS_S9180_32X_PLATFORM_MODULE_VERSION = 1.1.0 +INGRASYS_S9280_64X_PLATFORM_MODULE_VERSION = 1.1.0 export INGRASYS_S9180_32X_PLATFORM_MODULE_VERSION +export INGRASYS_S9280_64X_PLATFORM_MODULE_VERSION INGRASYS_S9180_32X_PLATFORM_MODULE = sonic-platform-ingrasys-s9180-32x_$(INGRASYS_S9180_32X_PLATFORM_MODULE_VERSION)_amd64.deb $(INGRASYS_S9180_32X_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-ingrasys $(INGRASYS_S9180_32X_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) $(INGRASYS_S9180_32X_PLATFORM_MODULE)_PLATFORM = x86_64-ingrasys_s9180_32x-r0 SONIC_DPKG_DEBS += $(INGRASYS_S9180_32X_PLATFORM_MODULE) + +INGRASYS_S9280_64X_PLATFORM_MODULE = sonic-platform-ingrasys-s9280-64x_$(INGRASYS_S9280_64X_PLATFORM_MODULE_VERSION)_amd64.deb +$(INGRASYS_S9280_64X_PLATFORM_MODULE)_PLATFORM = x86_64-ingrasys_s9280_64x-r0 + +$(eval $(call add_extra_package,$(INGRASYS_S9180_32X_PLATFORM_MODULE),$(INGRASYS_S9280_64X_PLATFORM_MODULE))) diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/changelog b/platform/barefoot/sonic-platform-modules-ingrasys/debian/changelog index f5c70c166031..cfbeb17d018a 100644 --- a/platform/barefoot/sonic-platform-modules-ingrasys/debian/changelog +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/changelog @@ -1,15 +1,9 @@ platform-driver (1.1.0) unstable; urgency=low - * Add support for s9180-32x + * Add support for s9180-32x s9280-64x -- developer Fri, 26 May 2017 11:00:00 +0800 -platform-driver (1.1.0) unstable; urgency=low - - * Add support for s8900 series - - -- developer Wed, 29 Mar 2017 11:00:00 +0800 - platform-driver (1.0.0) unstable; urgency=low * Initial release (Closes: #nnnn) diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/control b/platform/barefoot/sonic-platform-modules-ingrasys/debian/control index ec2c1f20c0f7..a912ed8ace2e 100644 --- a/platform/barefoot/sonic-platform-modules-ingrasys/debian/control +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/control @@ -8,3 +8,7 @@ Standards-Version: 1.0.0 Package: sonic-platform-ingrasys-s9180-32x Architecture: amd64 Description: This package contains S9180-32X platform driver utility for SONiC project. + +Package: sonic-platform-ingrasys-s9280-64x +Architecture: amd64 +Description: This package contains S9280-64X platform driver utility for SONiC project. diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/rules b/platform/barefoot/sonic-platform-modules-ingrasys/debian/rules index 3ac0d3de6049..428b4731eb75 100755 --- a/platform/barefoot/sonic-platform-modules-ingrasys/debian/rules +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/rules @@ -1,13 +1,4 @@ #!/usr/bin/make -f -# -*- makefile -*- -# Sample debian/rules that uses debhelper. -# This file was originally written by Joey Hess and Craig Small. -# As a special exception, when this file is copied by dh-make into a -# dh-make output file, you may use that output file without restriction. -# This special exception was added by Craig Small in version 0.37 of dh-make. - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 export INSTALL_MOD_DIR:=extra @@ -15,7 +6,7 @@ PACKAGE_PRE_NAME := sonic-platform-ingrasys KVERSION ?= $(shell uname -r) KERNEL_SRC := /lib/modules/$(KVERSION) MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= s9180-32x +MODULE_DIRS:= s9180-32x s9280-64x MODULE_DIR := modules UTILS_DIR := utils SERVICE_DIR := service @@ -24,58 +15,28 @@ CONF_DIR := conf %: dh $@ --with systemd -clean: - dh_testdir - dh_testroot - dh_clean - -build: - #make modules -C $(KERNEL_SRC)/build M=$(MODULE_SRC) +override_dh_auto_build: (for mod in $(MODULE_DIRS); do \ make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ done) -binary: binary-arch binary-indep - # Nothing to do - -binary-arch: - # Nothing to do - -#install: build - #dh_testdir - #dh_testroot - #dh_clean -k - #dh_installdirs - -binary-indep: - dh_testdir - dh_installdirs +override_dh_auto_install: + (for mod in $(MODULE_DIRS); do \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} \ + $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} usr/sbin; \ + cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/*.sh \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/sbin; \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} lib/systemd/system; \ + cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system; \ + done) - # Custom package commands +override_dh_clean: + dh_clean (for mod in $(MODULE_DIRS); do \ - mkdir debian/tmp/usr/sbin -p; \ - mkdir debian/tmp/lib/systemd/system -p; \ - mkdir debian/tmp/etc/init.d -p; \ - dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ - cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ - cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/*.sh debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/sbin/; \ - cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/bfn debian/$(PACKAGE_PRE_NAME)-$${mod}/etc/init\.d/; \ - cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system/; \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules clean; \ done) - # Resuming debhelper scripts - dh_testroot - dh_install - dh_installchangelogs - dh_installdocs - dh_systemd_enable - dh_installinit - dh_systemd_start - dh_link - dh_fixperms - dh_compress - dh_strip - dh_installdeb - dh_gencontrol - dh_md5sums - dh_builddeb -.PHONY: build binary binary-arch binary-indep clean + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.dirs b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.dirs deleted file mode 100644 index 401d79eb79b8..000000000000 --- a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.dirs +++ /dev/null @@ -1,4 +0,0 @@ -usr/sbin -lib/systemd/system -etc/ -etc/init.d/ \ No newline at end of file diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.init b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.init new file mode 100644 index 000000000000..9479fa354949 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.init @@ -0,0 +1,41 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S9180-32X board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + + echo "done." + ;; + +stop) + + i2c_utils.sh i2c_deinit + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-ingrasys-s9180-32x.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.install b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.install deleted file mode 100644 index 99bda5d123ae..000000000000 --- a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.install +++ /dev/null @@ -1,4 +0,0 @@ -lib/systemd/ -usr/sbin/ -etc/ -etc/init.d/ diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postinst b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postinst deleted file mode 100644 index 38e5cac148c4..000000000000 --- a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postinst +++ /dev/null @@ -1,57 +0,0 @@ -# Automatically added by dh_systemd_enable -# This will only remove masks created by d-s-h on package removal. -deb-systemd-helper unmask s9180-32x-monitor.service >/dev/null || true -deb-systemd-helper unmask bfn.service >/dev/null || true -deb-systemd-helper unmask qsfp-monitor.service >/dev/null || true -# Generate kernel modules.dep and map files for add eeprom_mb. -depmod -a || true -# was-enabled defaults to true, so new installations run enable. -if deb-systemd-helper --quiet was-enabled s9180-32x-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable s9180-32x-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state s9180-32x-monitor.service >/dev/null || true -fi -if deb-systemd-helper --quiet was-enabled bfn.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable bfn.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state bfn.service >/dev/null || true -fi -if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then - # Enables the unit on first installation, creates new - # symlinks on upgrades if the unit file has changed. - deb-systemd-helper enable qsfp-monitor.service >/dev/null || true -else - # Update the statefile to add new symlinks (if any), which need to be - # cleaned up on purge. Also remove old symlinks. - deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s9180-32x-monitor" ]; then - update-rc.d s9180-32x-monitor defaults >/dev/null - invoke-rc.d s9180-32x-monitor start || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - update-rc.d qsfp-monitor defaults >/dev/null - invoke-rc.d qsfp-monitor start || exit $? -fi -if [ -x "/etc/init.d/bfn" ]; then - invoke-rc.d bfn start || exit $? -fi -# End automatically added section -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - deb-systemd-invoke start s9180-32x-monitor.service >/dev/null || true - deb-systemd-invoke start qsfp-monitor.service >/dev/null || true - deb-systemd-invoke start bfn.service >/dev/null || true -fi -# End automatically added section diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postrm b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postrm deleted file mode 100644 index 19c6bcb2945f..000000000000 --- a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.postrm +++ /dev/null @@ -1,42 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - systemctl --system daemon-reload >/dev/null || true - fi -# End automatically added section -# Automatically added by dh_installinit -if [ "$1" = "purge" ] ; then - update-rc.d s9180-32x-monitor remove >/dev/null - update-rc.d bfn remove >/dev/null - update-rc.d qsfp-monitor remove >/dev/null -fi - - -# In case this system is running systemd, we make systemd reload the unit files -# to pick up changes. -if [ -d /run/systemd/system ] ; then - systemctl --system daemon-reload >/dev/null || true -fi -# End automatically added section -# Automatically added by dh_systemd_enable -if [ "$1" = "remove" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper mask s9180-32x-monitor.service >/dev/null - deb-systemd-helper mask bfn.service >/dev/null - deb-systemd-helper mask qsfp-monitor.service >/dev/null - fi -fi - -if [ "$1" = "purge" ]; then - if [ -x "/usr/bin/deb-systemd-helper" ]; then - deb-systemd-helper purge s9180-32x-monitor.service >/dev/null - deb-systemd-helper unmask s9180-32x-monitor.service >/dev/null - deb-systemd-helper purge bfn.service >/dev/null - deb-systemd-helper unmask bfn.service >/dev/null - deb-systemd-helper purge qsfp-monitor.service >/dev/null - deb-systemd-helper unmask qsfp-monitor.service >/dev/null - fi -fi -# Generate kernel modules.dep and map files for remove eeprom_mb. -depmod -a || true -# End automatically added section - diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.prerm b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.prerm deleted file mode 100644 index 76533bfe6889..000000000000 --- a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.prerm +++ /dev/null @@ -1,21 +0,0 @@ -# Automatically added by dh_systemd_start -if [ -d /run/systemd/system ]; then - deb-systemd-invoke stop s9180-32x-monitor.service >/dev/null - deb-systemd-invoke stop bfn.service >/dev/null - deb-systemd-invoke stop qsfp-monitor.service >/dev/null -fi -# End automatically added section -# Automatically added by dh_installinit -if [ -x "/etc/init.d/s9180-32x-monitor" ]; then - invoke-rc.d s9180-32x-monitor stop || exit $? -fi -if [ -x "/etc/init.d/bfn" ]; then - invoke-rc.d bfn stop || exit $? -fi -if [ -x "/etc/init.d/qsfp-monitor" ]; then - invoke-rc.d qsfp-monitor stop || exit $? -fi -# Driver deinit -/usr/sbin/i2c_utils.sh i2c_deinit -# End automatically added section - diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.upstart b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.upstart deleted file mode 100644 index 2c8d2ebec6d7..000000000000 --- a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9180-32x.upstart +++ /dev/null @@ -1,7 +0,0 @@ -description "SONiC platform service" - -respawn - -exec /usr/sbin/s9180_32x_monitor.sh -exec /usr/sbin/qsfp_monitor.sh -exec /etc/init.d/bfn start diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9280-64x.init b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9280-64x.init new file mode 100644 index 000000000000..545ec8e9987a --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9280-64x.init @@ -0,0 +1,41 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S9280-64X board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + + echo "done." + ;; + +stop) + + i2c_utils i2c_deinit + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-ingrasys-s9280-64x.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/Makefile b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/Makefile index 3edb8690475e..df7bfd3e770e 100644 --- a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/Makefile +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/Makefile @@ -1 +1,3 @@ obj-m := eeprom_mb.o +obj-m+= cpld_wdt.o + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/cpld_wdt.c b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/cpld_wdt.c new file mode 100644 index 000000000000..4cf70b4b80ab --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/modules/cpld_wdt.c @@ -0,0 +1,296 @@ +/* + * CPLD Watchdog Driver + * + * Copyright (c) 2018 Ingrasys Corp. + * + * Author: Wade He + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +/* Module and version information */ +#define DRV_NAME "cpld_wdt" +#define DRV_VERSION "1.0" + +/* Includes */ +#include /* For module specific items */ +#include /* For new moduleparam's */ +#include /* For standard types (like size_t) */ +#include /* For the -ENODEV/... values */ +#include /* For printk/panic/... */ +#include /* For the watchdog specific items */ +#include /* For __init/__exit/... */ +#include /* For file operations */ +#include /* For platform_driver framework */ +#include /* For pci functions */ +#include /* For io-port access */ +#include /* For spin_lock/spin_unlock/... */ +#include /* For copy_to_user/put_user/... */ +#include /* For inb/outb/... */ +#include +#include +#include +#include + + +/* Address definitions for the CPLD */ +/* CPLD base address */ +#define TCOBASE 0x600 +/* SMI Control and Enable Register */ + +#define TCO_RLD (TCOBASE + 0x00) /* TCO Timer Reload and Curr. Value */ +#define TCOv1_TMR (TCOBASE + 0x01) /* TCOv1 Timer Initial Value */ +#define TCO_DAT_IN (TCOBASE + 0x02) /* TCO Data In Register */ +#define TCO_DAT_OUT (TCOBASE + 0x03) /* TCO Data Out Register */ +#define TCO1_STS (TCOBASE + 0x04) /* Control Watchdog Register */ +#define TCO2_STS (TCOBASE + 0x06) /* TCO2 Status Register */ +#define TCO1_CNT (TCOBASE + 0x08) /* TCO1 Control Register */ +#define TCO2_CNT (TCOBASE + 0x0a) /* TCO2 Control Register */ +#define TCOv2_TMR (TCOBASE + 0x12) /* TCOv2 Timer Initial Value */ + +#define DEBUG +#ifdef DEBUG + #define DEBUG_PRINT(fmt, args...) \ + printk (KERN_INFO "%s[%d]: " fmt "\r\n", \ + __FUNCTION__, __LINE__, ##args) +#else + #define DEBUG_PRINT(fmt, args...) +#endif + +#define ERROR_MSG(fmt, args...) \ + printk(KERN_ERR "%s[%d]: " fmt "\r\n", \ + __FUNCTION__, __LINE__, ##args) + + + +/* internal variables */ +static struct { /* this is private data for the cpld_wdt device */ + /* the lock for io operations */ + spinlock_t io_lock; + struct platform_device *dev; +} cpld_wdt_private; + +static struct task_struct *cpld_wdt_tsk; +static int data; + +static void device_release(struct device *dev) +{ + return; +} + +static struct platform_device cpld_wdt = { + .name = DRV_NAME, + .id = 0, + .dev = { + .platform_data = NULL, + .release = device_release + }, +}; + +/* module parameters */ +#define WATCHDOG_TIMEOUT 15 /* 15 sec default heartbeat */ +static int heartbeat = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog ping period in seconds. " + "5..20, default=" + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, + "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + + +static int cpld_wdt_check_timeout_range(unsigned int tmrval) +{ + if (tmrval < 5 || tmrval > 20) { + DEBUG_PRINT("heartbeat out of range, using default=%d\n", WATCHDOG_TIMEOUT); + heartbeat = WATCHDOG_TIMEOUT; + } else { + DEBUG_PRINT("heartbeat using %d seconds\n", heartbeat); + } + + return 0; +} + +/* + * Some TCO specific functions + */ + +static int cpld_wdt_stop(void *arg) +{ + + spin_lock(&cpld_wdt_private.io_lock); + + outb(0x1, TCO1_STS); + + DEBUG_PRINT("cpld_wdt_stop done"); + + spin_unlock(&cpld_wdt_private.io_lock); + + return 0; +} + +static int cpld_wdt_ping(void *arg) +{ + spin_lock(&cpld_wdt_private.io_lock); + + /* Reload the timer by writing to the TCO Timer Counter register */ + outb(0x1, TCO1_STS); /* write 1 to clear bit */ + udelay(100); + outb(0x3, TCO1_STS); + + DEBUG_PRINT("cpld_wdt_ping done"); + + spin_unlock(&cpld_wdt_private.io_lock); + return 0; +} + +static int kthread_wdt_ping_loop(void *arg) +{ + int i; + + set_current_state(TASK_INTERRUPTIBLE); + + while(!kthread_should_stop()) { + DEBUG_PRINT("ping start"); + cpld_wdt_ping(NULL); + set_current_state(TASK_INTERRUPTIBLE); + for (i=0;i"); +MODULE_DESCRIPTION("CPLD Watchdog Timer Kernel Driver"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/bfn.service b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/bfn.service deleted file mode 100644 index 6c8c2fb71517..000000000000 --- a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/service/bfn.service +++ /dev/null @@ -1,13 +0,0 @@ -[Unit] -Description=Barefoot Kernel Module -After=local-fs.target -Before=docker.service - -[Service] -Type=oneshot -ExecStart=-/etc/init.d/bfn start -ExecStop=-/etc/init.d/bfn stop -RemainAfterExit=yes - -[Install] -WantedBy=multi-user.target diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/bfn b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/bfn deleted file mode 100755 index c52b1fab4ea1..000000000000 --- a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/bfn +++ /dev/null @@ -1,44 +0,0 @@ -#!/bin/bash -# This script load/unload Barefoot kernel modules - -### BEGIN INIT INFO -# Provides: -# Required-Start: -# Required-Stop: -# Should-Start: -# Should-Stop: -# Default-Start: S -# Default-Stop: 0 6 -# Short-Description: Load Barefoot kernel modules -### END INIT INFO - -case "$1" in -start) - echo -n "Load Barefoot kernel modules... " - - modprobe bf_kdrv - modprobe bf_tun - - echo "done." - ;; - -stop) - echo -n "Unload Barefoot kernel modules... " - - rmmod bf_tun - rmmod bf_kdrv - - echo "done." - ;; - -force-reload|restart) - echo "Not supported" - ;; - -*) - echo "Usage: /etc/init.d/bfn {start|stop}" - exit 1 - ;; -esac - -exit 0 diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh index e765ed1da6a9..969ba09f84cb 100755 --- a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/i2c_utils.sh @@ -72,6 +72,7 @@ NUM_FRU_MUX_CHAN2_DEVICE=$(( ${NUM_FRU_MUX_CHAN0_DEVICE} + 2 )) # FAN NUM_CPLD_DEVICE=$(( ${NUM_MUX7_CHAN0_DEVICE} + 3 )) # CPLD NUM_SFP1_DEVICE=$(( ${NUM_MUX7_CHAN0_DEVICE} + 4 )) # CPLD NUM_SFP2_DEVICE=$(( ${NUM_MUX7_CHAN0_DEVICE} + 5 )) # CPLD +NUM_ROV_DEVICE=${NUM_MAIN_MUX_CHAN6_DEVICE} PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" @@ -89,12 +90,20 @@ PATH_MUX_CHAN7_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN7_DEVICE}" PATH_MUX7_CHAN0_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX7_CHAN0_DEVICE}" PATH_MAIN_MUX_CHAN0_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MAIN_MUX_CHAN0_DEVICE}" +# i2c address for deviecs +CPLD_I2C_ADDR=0x33 +ROV_I2C_ADDR=0x22 + #Power Supply Status PSU_DC_ON=1 PSU_DC_OFF=0 PSU_EXIST=1 PSU_NOT_EXIST=0 +# vdd value for mac +rov_val_array=( 0.85 0.82 0.77 0.87 0.74 0.84 0.79 0.89 ) +rov_reg_array=( 0x24 0x21 0x1c 0x26 0x19 0x23 0x1e 0x28 ) + # Help usage function function _help { echo "=========================================================" @@ -159,6 +168,7 @@ function _i2c_init { modprobe i2c_i801 modprobe i2c_dev modprobe i2c_mux_pca954x force_deselect_on_exit=1 + #modprobe cpld_wdt if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN0_DEVICE}" ]; then _retry "echo 'pca9548 0x70' > ${PATH_I801_DEVICE}/new_device" @@ -227,9 +237,35 @@ function _i2c_init { _i2c_led_fan_status_set _i2c_led_fan_tray_status_set + # rov for mac init + _mac_vdd_init + #SYS LED set green COLOR_SYS_LED="green" _i2c_sys_led + +} + +function _mac_vdd_init { + # read mac vid register value from CPLD + val=`i2cget -y ${NUM_CPLD_DEVICE} ${CPLD_I2C_ADDR} 0x42 2>/dev/null` + + # get vid form register value [0:2] + vid=$(($val & 0x7)) + + # get rov val and reg according to vid + rov_val=${rov_val_array[$vid]} + rov_reg=${rov_reg_array[$vid]} + echo "vid=${vid}, rov_val=${rov_val}, rov_reg=${rov_reg}" + + # write the rov reg to rov + i2cset -y -r ${NUM_ROV_DEVICE} ${ROV_I2C_ADDR} 0x21 ${rov_reg} w + + if [ $? -eq 0 ]; then + echo "set ROV for mac vdd done" + else + echo "set ROV for mac vdd fail" + fi } #I2C Deinit @@ -290,7 +326,7 @@ function _i2c_io_exp_init { i2cset -y -r ${NUM_I801_DEVICE} 0x26 5 0x00 i2cset -y -r ${NUM_I801_DEVICE} 0x26 2 0x3F i2cset -y -r ${NUM_I801_DEVICE} 0x26 3 0x1F - i2cset -y -r ${NUM_I801_DEVICE} 0x26 6 0xC0 + i2cset -y -r ${NUM_I801_DEVICE} 0x26 6 0xD0 i2cset -y -r ${NUM_I801_DEVICE} 0x26 7 0x00 #CPU Baord @@ -914,7 +950,7 @@ function _i2c_qsfp_eeprom_init { if [ "${action}" == "new" ] && \ ! [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then - echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/new_device + echo "optoe1 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/new_device elif [ "${action}" == "delete" ] && \ [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/delete_device @@ -1006,7 +1042,7 @@ function _i2c_sfp_eeprom_init { return fi - #Init 1-32 ports EEPROM + #Init 33-34 ports EEPROM if [ "${action}" == "new" ] && \ ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP1_DEVICE}-0050 ] && \ ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_SFP2_DEVICE}-0050 ]; then diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/s9180_32x_monitor.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/s9180_32x_monitor.sh index c110bdeaaf04..eedf685b290b 100755 --- a/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/s9180_32x_monitor.sh +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9180-32x/utils/s9180_32x_monitor.sh @@ -21,6 +21,7 @@ I2C_UTILS="/usr/sbin/i2c_utils.sh" # TBD: LED status monitor function _led_monitor { ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_psu_status_set >/dev/null ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null } @@ -38,4 +39,4 @@ function _main { done } -_main \ No newline at end of file +_main diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/README.md b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/README.md new file mode 100644 index 000000000000..7411603ba608 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/README.md @@ -0,0 +1,175 @@ +# Ingrasys S9280-64X Platform Driver for SONiC + +Copyright (C) 2016 Ingrasys, Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + +## Licensing terms + +The Licensing terms of the files within this project is split 2 parts. +The Linux kernel is released under the GNU General Public License version 2. +All other code is released under the GNU General Public License version 3. +Please see the LICENSE file for copies of both licenses. + +## Contents of this package + + - service/ + > Service config files for platform initialization and monitoring + - utils/ + > Scripts useful during platform bringup and sysfs function + - conf/ + > Platform configure files. + +## Kernel modules and drivers + +The driver for interacting with Ingrasys S9280-64X is contained in the I2C +kernel module and initialization script. The initialization script loads +the modules in the correct order. It has been built and tested against +the Linux 3.16 kernel. + +The initialization script will modprobe the needed modules, navigate to the +module's device directory in sysfs, and write configuration data to +the kernel module. + +### IGB + +This is OOB Ports on front panel for management plane. + +The IGB module must be loaded first on Ingrasys S9280-64X platform. + +### I2C i801 + +The I2C i801 on Ingrasys S9280-64X can be found in +`/sys/bus/i2c/devices/i2c-0/` + +This is I2C bus for Clock Gen, DIMM channel and digital potentiometers. + +The i801 module must be loaded second on Ingrasys S9280-64X. + +### I2C PCA9548 +The PCA9548 module on S9280-64X can be found in +`/sys/bus/i2c/devices/i2c-0/` , `/sys/bus/i2c/devices/i2c-17/`, +`/sys/bus/i2c/devices/i2c-18/` , `/sys/bus/i2c/devices/i2c-19/`, +`/sys/bus/i2c/devices/i2c-20/`, `/sys/bus/i2c/devices/i2c-21/`, +`/sys/bus/i2c/devices/i2c-22/`, `/sys/bus/i2c/devices/i2c-23/`, +`/sys/bus/i2c/devices/i2c-24/`. + +The pca9548 module for zQSFP module get/set functions, PSU information, +fan status and EEPROM. + +## Hardware components + +The hardware components are initialized in the init script on S9280-64X. +The following describes manual initialization as well as interaction. +The examples below are just for Ingrasys S9280-64X platform. + +### Hardware initialization + +When the sonic-platform-ingrasys-s9280 package is installed on the S9280-64X, +it is automatically initialized. If you want to manual initialization, the +utility command usage as follows: +``` + i2c_utils.sh i2c_init +``` + +### EEPROM + +The EEPROM is including the board SKU, model name, vendor name, serial number, +and other information can be accessed with the specific eeprom kernel module. +After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs. + +The hexdump utility can be used to decode the raw output of the EEPROM. +For example, +``` + bash# echo "mb_eeprom 0x55" > /sys/bus/i2c/devices/i2c-0/new_device + bash# cat /sys/bus/i2c/drivers/mb_eeprom/0-0055/eeprom | hexdump -C +``` + +### Front panel LEDs + +LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`. +Utility function command usage as follows: + +``` +Status LED: + i2c_utils.sh i2c_sys_led green|amber on|off + +Fan status LED: + i2c_utils.sh i2c_fan_led green|amber on|off + +PSU1 status LED: + i2c_utils.sh i2c_psu1_led green|amber on|off + +PSU2 status LED: + i2c_utils.sh i2c_psu2_led green|amber on|off + +``` +QSFP Module Port LEDs control by ASIC library. + + +### Fan speed + +Fan speed are controlled by the w83795 kernel module. +It can be found in `/sys/class/hwmon/hwmon2/device/`. +If they were compiled as modules, you will need to modprobe w83795 for +their sysfs entries to show up. Each fan has an `fan_input` file +for reading the fan speed. And `pwm1` setting fan1 to fan4, +`pwm2` setting fan5 to fan8. + +There is docker-platform-monitor container installed fancontrol package that can +automatic control platform fan speed. + + +### Temperature sensors + +Temperature sensors are controlled by the w83795 kernel +module. It can be found in `/sys/class/hwmon/hwmon3/device/`. +If they were compiled as modules, then you will need to modprobe w83795 for +their sysfs entries to show up. +`temp1_input` is front MAC temperature sensor. `temp2_input` is rear MAC +temperature sensor. + +There is docker-platform-monitor container installed lm-sensors package that can +monitor platform temperature. And `sensors` command can show each +temperature sensors status. + +### Power supplies + +Power supplies status and its EEPROM info can be used i2c utility +`/usr/sbin/i2c_utils.sh` to get. +The usage as follows: +``` +PSU EEPROM: + i2c_utils.sh i2c_psu_eeprom_get + +PSU Status: + i2c_utils.sh i2c_psu_status +``` + +### QSFPs +QSFP modules are managed by the pca9548 kernel driver. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +QSFP EEPROM: + i2c_utils.sh i2c_qsfp_eeprom_get [1-64] + +QSFP Insert Event: + i2c_utils.sh i2c_qsfp_status_get [1-64] + 0 => not insert + 1 => inserted +``` + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/Makefile b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/Makefile new file mode 100644 index 000000000000..af1a5abe1d12 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/Makefile @@ -0,0 +1,3 @@ +obj-m := eeprom_mb.o +obj-m += ingrasys_s9280_64x_i2c_cpld.o +obj-m += ingrasys_s9280_64x_psu.o diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/eeprom_mb.c b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/eeprom_mb.c new file mode 100644 index 000000000000..528864d93382 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/eeprom_mb.c @@ -0,0 +1,267 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* enable dev_dbg print out */ +//#define DEBUG + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { /*0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57,*/ I2C_CLIENT_END }; + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 512 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void mb_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, (u8)((addr >> 8) & 0xFF), (u8)(addr & 0xFF)); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t mb_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + mb_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static ssize_t mb_eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + int ret; + int i; + u8 cmd; + u16 value16; + + dev_dbg(&client->dev, "mb_eeprom_write off=%d, count=%d\n", (int)off, (int)count); + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + mutex_lock(&data->update_lock); + + for(i=0; i < count; i++) { + /* write command */ + cmd = (off >> 8) & 0xff; + value16 = off & 0xff; + value16 |= buf[i] << 8; + ret = i2c_smbus_write_word_data(client, cmd, value16); + + if (ret < 0) { + dev_err(&client->dev, "write address failed at %d \n", (int)off); + goto exit; + } + + off++; + + /* need to wait for write complete */ + udelay(10000); + } +exit: + mutex_unlock(&data->update_lock); + /* force to update client when reading */ + for(i=0; i < SLICE_NUM; i++) { + data->last_updated[i] = 0; + } + + return count; +} + +static struct bin_attribute mb_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO | S_IWUSR, + }, + .size = EEPROM_SIZE, + .read = mb_eeprom_read, + .write = mb_eeprom_write, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int mb_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x51 and 0x55. So decline + attaching to addresses >= 0x56 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x56) { + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + return -ENODEV; + } + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int mb_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &mb_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int mb_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &mb_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id mb_eeprom_id[] = { + { "mb_eeprom", 0 }, + { } +}; + +static struct i2c_driver mb_eeprom_driver = { + .driver = { + .name = "mb_eeprom", + }, + .probe = mb_eeprom_probe, + .remove = mb_eeprom_remove, + .id_table = mb_eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = mb_eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(mb_eeprom_driver); + +MODULE_AUTHOR("Wade "); +MODULE_DESCRIPTION("Ingrasys Mother Borad EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_i2c_cpld.c b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_i2c_cpld.c new file mode 100644 index 000000000000..912060cc93e5 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_i2c_cpld.c @@ -0,0 +1,1618 @@ +/* + * A i2c cpld driver for the ingrasys_s9280_64x + * + * Copyright (C) 2017 Ingrasys Technology Corporation. + * Leo Lin + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ingrasys_s9280_64x_i2c_cpld.h" + +#ifdef DEBUG +#define DEBUG_PRINT(fmt, args...) \ + printk(KERN_INFO "%s:%s[%d]: " fmt "\r\n", \ + __FILE__, __func__, __LINE__, ##args) +#else +#define DEBUG_PRINT(fmt, args...) +#endif + +#define I2C_READ_BYTE_DATA(ret, lock, i2c_client, reg) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_read_byte_data(i2c_client, reg); \ + mutex_unlock(lock); \ +} +#define I2C_WRITE_BYTE_DATA(ret, lock, i2c_client, reg, val) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_write_byte_data(i2c_client, reg, val); \ + mutex_unlock(lock); \ +} + +/* CPLD sysfs attributes index */ +enum s9280_64x_cpld_sysfs_attributes { + CPLD_ACCESS_REG, + CPLD_REGISTER_VAL, + CPLD_PORT_START, + CPLD_PORTS, + CPLD_VERSION, + CPLD_ID, + CPLD_BOARD_TYPE, + CPLD_EXT_BOARD_TYPE, + CPLD_QSFP_PORT_STATUS_1, + CPLD_QSFP_PORT_STATUS_2, + CPLD_QSFP_PORT_STATUS_3, + CPLD_QSFP_PORT_STATUS_4, + CPLD_QSFP_PORT_STATUS_5, + CPLD_QSFP_PORT_STATUS_6, + CPLD_QSFP_PORT_STATUS_7, + CPLD_QSFP_PORT_STATUS_8, + CPLD_QSFP_PORT_STATUS_9, + CPLD_QSFP_PORT_STATUS_10, + CPLD_QSFP_PORT_STATUS_11, + CPLD_QSFP_PORT_STATUS_12, + CPLD_QSFP_PORT_STATUS_13, + CPLD_QSFP_PORT_CONFIG_1, + CPLD_QSFP_PORT_CONFIG_2, + CPLD_QSFP_PORT_CONFIG_3, + CPLD_QSFP_PORT_CONFIG_4, + CPLD_QSFP_PORT_CONFIG_5, + CPLD_QSFP_PORT_CONFIG_6, + CPLD_QSFP_PORT_CONFIG_7, + CPLD_QSFP_PORT_CONFIG_8, + CPLD_QSFP_PORT_CONFIG_9, + CPLD_QSFP_PORT_CONFIG_10, + CPLD_QSFP_PORT_CONFIG_11, + CPLD_QSFP_PORT_CONFIG_12, + CPLD_QSFP_PORT_CONFIG_13, + CPLD_QSFP_PORT_INTERRUPT, + CPLD_SFP_PORT_STATUS, + CPLD_SFP_PORT_CONFIG, + CPLD_10GMUX_CONFIG, + CPLD_BMC_STATUS, + CPLD_BMC_WATCHDOG, + CPLD_USB_STATUS, + CPLD_RESET_CONTROL, + CPLD_SFP_LED, + CPLD_SFP_LED_BLINK, + CPLD_QSFP_LED_1, + CPLD_QSFP_LED_2, + CPLD_QSFP_LED_3, + CPLD_QSFP_LED_4, + CPLD_QSFP_LED_5, + CPLD_QSFP_LED_6, + CPLD_QSFP_LED_7, + CPLD_QSFP_LED_8, + CPLD_QSFP_LED_9, + CPLD_QSFP_LED_10, + CPLD_QSFP_LED_11, + CPLD_QSFP_LED_12, + CPLD_QSFP_LED_13, + CPLD_QSFP_LED_14, + CPLD_QSFP_LED_15, + CPLD_QSFP_LED_16, + CPLD_QSFP_LED_BLINK, + CPLD_RTMR_RESET, + CPLD_ROV_STATUS, + +}; + +/* CPLD sysfs attributes hook functions */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t get_qsfp_port_start(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t get_qsfp_ports(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_cpld_id(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_qsfp_port_status(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_qsfp_port_config(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_qsfp_port_config(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_qsfp_port_interrupt(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_sfp_port_status(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_sfp_port_config(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_sfp_port_config(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_10gmux_config(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_10gmux_config(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_bmc_status(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_bmc_watchdog(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_bmc_watchdog(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_usb_status(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_reset_control(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_reset_control(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_sfp_led(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_sfp_led(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_sfp_led_blink(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_sfp_led_blink(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_qsfp_led(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_qsfp_led(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_qsfp_led_blink(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_qsfp_led_blink(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_rtmr_reset(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_rtmr_reset(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_rov_status(struct device *dev, + struct device_attribute *da, char *buf); + +static LIST_HEAD(cpld_client_list); /* client list for cpld */ +static struct mutex list_lock; /* mutex for client list */ + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +struct cpld_data { + int index; /* CPLD index */ + struct mutex access_lock; /* mutex for cpld access */ + u8 access_reg; /* register to access */ +}; + +/* CPLD device id and data */ +static const struct i2c_device_id ingrasys_i2c_cpld_id[] = { + { "ingrasys_cpld1", cpld1 }, + { "ingrasys_cpld2", cpld2 }, + { "ingrasys_cpld3", cpld3 }, + { "ingrasys_cpld4", cpld4 }, + { "ingrasys_cpld5", cpld5 }, + {} +}; + +/* Addresses scanned for ingrasys_i2c_cpld */ +static const unsigned short cpld_i2c_addr[] = { 0x33, I2C_CLIENT_END }; + +/* define all support register access of cpld in attribute */ +static SENSOR_DEVICE_ATTR(cpld_access_register, S_IWUSR | S_IRUGO, + read_access_register, write_access_register, CPLD_ACCESS_REG); +static SENSOR_DEVICE_ATTR(cpld_register_value, S_IWUSR | S_IRUGO, + read_register_value, write_register_value, CPLD_REGISTER_VAL); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_start, S_IRUGO, + get_qsfp_port_start, NULL, CPLD_PORT_START); +static SENSOR_DEVICE_ATTR(cpld_qsfp_ports, S_IRUGO, + get_qsfp_ports, NULL, CPLD_PORTS); +static SENSOR_DEVICE_ATTR(cpld_version, S_IRUGO, + read_cpld_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(cpld_id, S_IRUGO, read_cpld_id, NULL, CPLD_ID); +static SENSOR_DEVICE_ATTR(cpld_board_type, S_IRUGO, + read_board_type, NULL, CPLD_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_ext_board_type, S_IRUGO, + read_ext_board_type, NULL, CPLD_EXT_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_1, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_1); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_2, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_2); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_3, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_3); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_4, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_4); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_5, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_5); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_6, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_6); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_7, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_7); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_8, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_8); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_9, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_9); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_10, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_10); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_11, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_11); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_12, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_12); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_status_13, S_IRUGO, + read_qsfp_port_status, NULL, CPLD_QSFP_PORT_STATUS_13); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_1, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_1); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_2, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_2); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_3, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_3); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_4, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_4); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_5, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_5); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_6, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_6); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_7, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_7); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_8, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_8); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_9, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_9); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_10, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_10); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_11, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_11); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_12, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_12); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_config_13, S_IWUSR | S_IRUGO, + read_qsfp_port_config, write_qsfp_port_config, + CPLD_QSFP_PORT_CONFIG_13); +static SENSOR_DEVICE_ATTR(cpld_qsfp_port_interrupt, S_IRUGO, + read_qsfp_port_interrupt, NULL, CPLD_QSFP_PORT_INTERRUPT); +static SENSOR_DEVICE_ATTR(cpld_sfp_port_status, S_IRUGO, + read_sfp_port_status, NULL, CPLD_SFP_PORT_STATUS); +static SENSOR_DEVICE_ATTR(cpld_sfp_port_config, S_IWUSR | S_IRUGO, + read_sfp_port_config, write_sfp_port_config, CPLD_SFP_PORT_CONFIG); +static SENSOR_DEVICE_ATTR(cpld_10gmux_config, S_IWUSR | S_IRUGO, + read_10gmux_config, write_10gmux_config, + CPLD_10GMUX_CONFIG); +static SENSOR_DEVICE_ATTR(cpld_bmc_status, S_IRUGO, + read_bmc_status, NULL, CPLD_BMC_STATUS); +static SENSOR_DEVICE_ATTR(cpld_bmc_watchdog, S_IWUSR | S_IRUGO, + read_bmc_watchdog, write_bmc_watchdog, + CPLD_BMC_WATCHDOG); +static SENSOR_DEVICE_ATTR(cpld_usb_status, S_IRUGO, + read_usb_status, NULL, CPLD_USB_STATUS); +static SENSOR_DEVICE_ATTR(cpld_reset_control, S_IWUSR | S_IRUGO, + read_reset_control, write_reset_control, + CPLD_BMC_WATCHDOG); +static SENSOR_DEVICE_ATTR(cpld_sfp_led, S_IWUSR | S_IRUGO, + read_sfp_led, write_sfp_led, CPLD_SFP_LED); +static SENSOR_DEVICE_ATTR(cpld_sfp_led_blink, S_IWUSR | S_IRUGO, + read_sfp_led_blink, write_sfp_led_blink, CPLD_SFP_LED_BLINK); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_1, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_1); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_2, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_2); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_3, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_3); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_4, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_4); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_5, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_5); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_6, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_6); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_7, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_7); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_8, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_8); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_9, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_9); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_10, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_10); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_11, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_11); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_12, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_12); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_13, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_13); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_14, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_14); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_15, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_15); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_16, S_IWUSR | S_IRUGO, + read_qsfp_led, write_qsfp_led, CPLD_QSFP_LED_16); +static SENSOR_DEVICE_ATTR(cpld_qsfp_led_blink, S_IWUSR | S_IRUGO, + read_qsfp_led_blink, write_qsfp_led_blink, CPLD_QSFP_LED_BLINK); +static SENSOR_DEVICE_ATTR(cpld_rtmr_reset, S_IWUSR | S_IRUGO, + read_rtmr_reset, write_rtmr_reset, CPLD_RTMR_RESET); +static SENSOR_DEVICE_ATTR(cpld_rov_status, S_IRUGO, + read_rov_status, NULL, CPLD_ROV_STATUS); + +/* define support attributes of cpldx , total 5 */ +/* cpld 1 */ +static struct attribute *s9280_64x_cpld1_attributes[] = { + &sensor_dev_attr_cpld_access_register.dev_attr.attr, + &sensor_dev_attr_cpld_register_value.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_start.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_ports.dev_attr.attr, + &sensor_dev_attr_cpld_version.dev_attr.attr, + &sensor_dev_attr_cpld_id.dev_attr.attr, + &sensor_dev_attr_cpld_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_ext_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_interrupt.dev_attr.attr, + &sensor_dev_attr_cpld_sfp_port_status.dev_attr.attr, + &sensor_dev_attr_cpld_sfp_port_config.dev_attr.attr, + &sensor_dev_attr_cpld_10gmux_config.dev_attr.attr, + &sensor_dev_attr_cpld_bmc_status.dev_attr.attr, + &sensor_dev_attr_cpld_bmc_watchdog.dev_attr.attr, + &sensor_dev_attr_cpld_usb_status.dev_attr.attr, + &sensor_dev_attr_cpld_reset_control.dev_attr.attr, + &sensor_dev_attr_cpld_sfp_led.dev_attr.attr, + &sensor_dev_attr_cpld_sfp_led_blink.dev_attr.attr, + &sensor_dev_attr_cpld_rtmr_reset.dev_attr.attr, + &sensor_dev_attr_cpld_rov_status.dev_attr.attr, + NULL +}; + +/* cpld 2 / cpld 3 / cpld 4 / cpld 5 */ +static struct attribute *s9280_64x_cpld2345_attributes[] = { +&sensor_dev_attr_cpld_access_register.dev_attr.attr, + &sensor_dev_attr_cpld_register_value.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_start.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_ports.dev_attr.attr, + &sensor_dev_attr_cpld_version.dev_attr.attr, + &sensor_dev_attr_cpld_id.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_status_13.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_config_13.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_port_interrupt.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_1.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_2.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_3.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_4.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_5.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_6.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_7.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_8.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_9.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_10.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_11.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_12.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_13.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_14.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_15.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_16.dev_attr.attr, + &sensor_dev_attr_cpld_qsfp_led_blink.dev_attr.attr, + NULL +}; + +/* cpld 1 attributes group */ +static const struct attribute_group s9280_64x_cpld1_group = { + .attrs = s9280_64x_cpld1_attributes, +}; +/* cpld 2/3/4/5 attributes group */ +static const struct attribute_group s9280_64x_cpld2345_group = { + .attrs = s9280_64x_cpld2345_attributes, +}; + +/* read access register from cpld data */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + + return sprintf(buf, "0x%x\n", reg); +} + +/* write access register to cpld data */ +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + + if (kstrtou8(buf, 0, ®) < 0) + return -EINVAL; + + data->access_reg = reg; + return count; +} + +/* read the value of access register in cpld data */ +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + int reg_val; + + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + + if (reg_val < 0) + return -1; + + return sprintf(buf, "0x%x\n", reg_val); +} + +/* wrtie the value to access register in cpld data */ +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + int ret = -EIO; + u8 reg = data->access_reg; + u8 reg_val; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, client, reg, reg_val); + + return count; +} + +/* get qsfp port start number of the cpld device */ +/* the start number use to tranlate qsfp port to cpld port */ +/* the cpld port use to access the qsfp port register in cpld */ +static ssize_t get_qsfp_port_start(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + int port_base_num; + + if (attr->index == CPLD_PORT_START) { + if (data->index == cpld1) { + port_base_num = 1; + } else { + port_base_num = CPLD_1_PORT_NUM + + CPLD_2_PORT_NUM*(data->index - 1) + 1; + } + return sprintf(buf, "%d\n", port_base_num); + } + return -1; +} + +/* get total qsfp port which contain register in the cpld device */ +static ssize_t get_qsfp_ports(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + int ports; + + if (attr->index == CPLD_PORTS) { + if (data->index == cpld1) + ports = CPLD_1_PORT_NUM; + else + ports = CPLD_2_PORT_NUM; + return sprintf(buf, "%d\n", ports); + } + return -1; +} + +/* get cpdl version register value */ +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_VERSION) { + reg = CPLD_VERSION_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get cpdl id register value */ +static ssize_t read_cpld_id(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_ID) { + reg = CPLD_ID_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get board type register value */ +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_BOARD_TYPE) { + reg = CPLD_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_EXT_BOARD_TYPE) { + reg = CPLD_EXT_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get qsfp port status register value */ +static ssize_t read_qsfp_port_status(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index >= CPLD_QSFP_PORT_STATUS_1 && + attr->index <= CPLD_QSFP_PORT_STATUS_13) { + reg = CPLD_QSFP_PORT_STATUS_BASE_REG + + (attr->index - CPLD_QSFP_PORT_STATUS_1); + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get qsfp port config register value */ +static ssize_t read_qsfp_port_config(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index >= CPLD_QSFP_PORT_CONFIG_1 && + attr->index <= CPLD_QSFP_PORT_CONFIG_13) { + reg = CPLD_QSFP_PORT_CONFIG_BASE_REG + + (attr->index - CPLD_QSFP_PORT_CONFIG_1); + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to qsfp port config register */ +static ssize_t write_qsfp_port_config(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index >= CPLD_QSFP_PORT_CONFIG_1 && + attr->index <= CPLD_QSFP_PORT_CONFIG_13) { + reg = CPLD_QSFP_PORT_CONFIG_BASE_REG + + (attr->index - CPLD_QSFP_PORT_CONFIG_1); + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get qsfp port interrupt register value */ +static ssize_t read_qsfp_port_interrupt(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_QSFP_PORT_INTERRUPT) { + reg = CPLD_QSFP_PORT_INTERRUPT_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get sfp port status register value */ +static ssize_t read_sfp_port_status(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_SFP_PORT_STATUS) { + reg = CPLD_SFP_PORT_STATUS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get sfp port config register value */ +static ssize_t read_sfp_port_config(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_SFP_PORT_CONFIG) { + reg = CPLD_SFP_PORT_CONFIG_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to sfp port config register */ +static ssize_t write_sfp_port_config(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_SFP_PORT_CONFIG) { + reg = CPLD_SFP_PORT_CONFIG_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get 10g mux config register value */ +static ssize_t read_10gmux_config(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_10GMUX_CONFIG) { + reg = CPLD_10GMUX_CONFIG_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to 10g mux config register */ +static ssize_t write_10gmux_config(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_10GMUX_CONFIG) { + reg = CPLD_10GMUX_CONFIG_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get bmc status register value */ +static ssize_t read_bmc_status(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_BMC_STATUS) { + reg = CPLD_BMC_STATUS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get bmc watchdog register value */ +static ssize_t read_bmc_watchdog(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_BMC_WATCHDOG) { + reg = CPLD_BMC_WATCHDOG_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to bmc watchdog register */ +static ssize_t write_bmc_watchdog(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_BMC_WATCHDOG) { + reg = CPLD_BMC_WATCHDOG_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get usb status register value */ +static ssize_t read_usb_status(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_USB_STATUS) { + reg = CPLD_USB_STATUS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get reset control register value */ +static ssize_t read_reset_control(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_RESET_CONTROL) { + reg = CPLD_RESET_CONTROL_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to reset control register */ +static ssize_t write_reset_control(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_RESET_CONTROL) { + reg = CPLD_RESET_CONTROL_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get sfp port 0/1 led register */ +static ssize_t read_sfp_led(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_SFP_LED) { + reg = CPLD_SFP_LED_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to sfp 0/1 port led register */ +static ssize_t write_sfp_led(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_SFP_LED) { + reg = CPLD_SFP_LED_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get sfp port 0/1 led blink register */ +static ssize_t read_sfp_led_blink(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_SFP_LED_BLINK) { + reg = CPLD_SFP_LED_BLINK_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to sfp port 0/1 led blink register */ +static ssize_t write_sfp_led_blink(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_SFP_LED_BLINK) { + reg = CPLD_SFP_LED_BLINK_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get qsfp port led register */ +static ssize_t read_qsfp_led(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index >= CPLD_QSFP_LED_1 && + attr->index <= CPLD_QSFP_LED_16) { + reg = CPLD_QSFP_LED_BASE_REG + (attr->index - CPLD_QSFP_LED_1); + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to qsfp port led register */ +static ssize_t write_qsfp_led(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index >= CPLD_QSFP_LED_1 && + attr->index <= CPLD_QSFP_LED_16) { + reg = CPLD_QSFP_LED_BASE_REG + (attr->index - CPLD_QSFP_LED_1); + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get qsfp 16 port led blink register value in 64 bit map */ +/* + each register for 2 port, each port has 4 channel for led blink + bit 64 56 48 40 32 24 16 8 0 + port 16/15 14/13 12/11 10/9 8/7 6/5 4/3 2/1 + */ +static ssize_t read_qsfp_led_blink(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val, i; + u64 bitmap = 0; + + if (attr->index == CPLD_QSFP_LED_BLINK) { + for (i = 0; i <= 7; i++) { + reg = CPLD_QSFP_LED_BLINK_BASE_REG + i; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + reg_val = reg_val & 0xff; + bitmap = bitmap | (reg_val<<(i*8)); + } + return sprintf(buf, "0x%llx\n", bitmap); + } + return -1; +} + +/* set 64 bit map value to qsfp port led blink register */ +/* + each register for 2 port, each port has 4 channel for led blink + bit 63 56 48 40 32 24 16 8 0 + port 16/15 14/13 12/11 10/9 8/7 6/5 4/3 2/1 + */ +static ssize_t write_qsfp_led_blink(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val, i; + int ret; + u64 bitmap = 0; + + if (kstrtou64(buf, 0, &bitmap) < 0) + return -EINVAL; + + if (attr->index == CPLD_QSFP_LED_BLINK) { + for (i = 0; i <= 7; i++) { + reg = CPLD_QSFP_LED_BLINK_BASE_REG + i; + reg_val = (u8)((bitmap >> i*8) & 0xFF); + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + } + return count; +} + +/* get retimer reset register */ +static ssize_t read_rtmr_reset(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_RTMR_RESET) { + reg = CPLD_RTMR_RESET_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* set value to retimer reset register */ +static ssize_t write_rtmr_reset(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg, reg_val; + int ret; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + if (attr->index == CPLD_RTMR_RESET) { + reg = CPLD_RTMR_RESET_REG; + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + client, reg, reg_val); + } + return count; +} + +/* get rov status register */ +static ssize_t read_rov_status(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_ROV_STATUS) { + reg = CPLD_ROV_STATUS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* add valid cpld client to list */ +static void ingrasys_i2c_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = NULL; + + node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + if (!node) { + dev_info(&client->dev, + "Can't allocate cpld_client_node for index %d\n", + client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +/* remove exist cpld client in list */ +static void ingrasys_i2c_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + list_for_each(list_node, &cpld_client_list) { + cpld_node = list_entry(list_node, + struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + mutex_unlock(&list_lock); +} + +/* cpld drvier probe */ +static int ingrasys_i2c_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + struct cpld_data *data = NULL; + int ret = -EPERM; + int idx; + + data = kzalloc(sizeof(struct cpld_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* init cpld data for client */ + i2c_set_clientdata(client, data); + mutex_init(&data->access_lock); + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_info(&client->dev, + "i2c_check_functionality failed (0x%x)\n", + client->addr); + status = -EIO; + goto exit; + } + + /* get cpld id from device */ + ret = i2c_smbus_read_byte_data(client, CPLD_ID_REG); + + if (ret < 0) { + dev_info(&client->dev, + "fail to get cpld id (0x%x) at addr (0x%x)\n", + CPLD_ID_REG, client->addr); + status = -EIO; + goto exit; + } + + CPLD_ID_ID_GET(ret, idx); + + if (INVALID(idx, cpld1, cpld5)) { + dev_info(&client->dev, + "cpld id %d(device) not valid\n", idx); + //status = -EPERM; + //goto exit; + } + +#if 0 + /* change client name for each cpld with index */ + snprintf(client->name, sizeof(client->name), "%s_%d", client->name, + data->index); +#endif + + data->index = dev_id->driver_data; + + /* register sysfs hooks for different cpld group */ + dev_info(&client->dev, "probe cpld with index %d\n", data->index); + switch (data->index) { + case cpld1: + status = sysfs_create_group(&client->dev.kobj, + &s9280_64x_cpld1_group); + break; + case cpld2: + case cpld3: + case cpld4: + case cpld5: + status = sysfs_create_group(&client->dev.kobj, + &s9280_64x_cpld2345_group); + break; + default: + status = -EINVAL; + } + + if (status) + goto exit; + + dev_info(&client->dev, "chip found\n"); + + /* add probe chip to client list */ + ingrasys_i2c_cpld_add_client(client); + + return 0; +exit: + sysfs_remove_group(&client->dev.kobj, &s9280_64x_cpld2345_group); + return status; +} + +/* cpld drvier remove */ +static int ingrasys_i2c_cpld_remove(struct i2c_client *client) +{ + struct cpld_data *data = i2c_get_clientdata(client); + + switch (data->index) { + case cpld1: + sysfs_remove_group(&client->dev.kobj, &s9280_64x_cpld1_group); + break; + case cpld2: + case cpld3: + case cpld4: + case cpld5: + sysfs_remove_group(&client->dev.kobj, + &s9280_64x_cpld2345_group); + break; + } + + ingrasys_i2c_cpld_remove_client(client); + return 0; +} + +MODULE_DEVICE_TABLE(i2c, ingrasys_i2c_cpld_id); + +static struct i2c_driver ingrasys_i2c_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ingrasys_i2c_cpld", + }, + .probe = ingrasys_i2c_cpld_probe, + .remove = ingrasys_i2c_cpld_remove, + .id_table = ingrasys_i2c_cpld_id, + .address_list = cpld_i2c_addr, +}; + +/* provid cpld register read */ +/* cpld_idx indicate the index of cpld device */ +int ingrasys_i2c_cpld_read(u8 cpld_idx, + u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + struct cpld_data *data; + + list_for_each(list_node, &cpld_client_list) { + cpld_node = list_entry(list_node, + struct cpld_client_node, list); + data = i2c_get_clientdata(cpld_node->client); + if (data->index == cpld_idx) { + DEBUG_PRINT("cpld_idx=%d, read reg 0x%02x", + cpld_idx, reg); + I2C_READ_BYTE_DATA(ret, &data->access_lock, + cpld_node->client, reg); + DEBUG_PRINT("cpld_idx=%d, read reg 0x%02x = 0x%02x", + cpld_idx, reg, ret); + break; + } + } + + return ret; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_read); + +/* provid cpld register write */ +/* cpld_idx indicate the index of cpld device */ +int ingrasys_i2c_cpld_write(u8 cpld_idx, + u8 reg, + u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + struct cpld_data *data; + + list_for_each(list_node, &cpld_client_list) { + cpld_node = list_entry(list_node, + struct cpld_client_node, list); + data = i2c_get_clientdata(cpld_node->client); + + if (data->index == cpld_idx) { + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, + cpld_node->client, + reg, value); + DEBUG_PRINT("cpld_idx=%d, write reg 0x%02x val 0x%02x, ret=%d", + cpld_idx, reg, value, ret); + break; + } + } + + return ret; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_write); + +/* provid qsfp port status register read */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_get_qsfp_port_status_val(u8 port_num) +{ + u8 cpld_idx, cpld_port, reg; + int reg_val; + + if (INVALID(port_num, QSFP_MIN_PORT_NUM, QSFP_MAX_PORT_NUM)) { + DEBUG_PRINT("invalid input value %d", port_num); + return -1; + } + QSFP_TO_CPLD_IDX(port_num, cpld_idx, cpld_port); + reg = QSFP_PORT_STATUS_REG(cpld_port); + DEBUG_PRINT("port_num=%d, cpld_idx=%d, cpld_port=%d, reg=0x%x", + port_num, cpld_idx, cpld_port, reg); + reg_val = ingrasys_i2c_cpld_read(cpld_idx, reg); + return reg_val; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_get_qsfp_port_status_val); + +/* provid qsfp port config register read */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_get_qsfp_port_config_val(u8 port_num) +{ + u8 cpld_idx, cpld_port, reg; + int reg_val; + + if (INVALID(port_num, QSFP_MIN_PORT_NUM, QSFP_MAX_PORT_NUM)) { + DEBUG_PRINT("invalid input value %d", port_num); + return -1; + } + QSFP_TO_CPLD_IDX(port_num, cpld_idx, cpld_port); + reg = QSFP_PORT_CONFIG_REG(cpld_port); + DEBUG_PRINT("port_num=%d, cpld_idx=%d, cpld_port=%d, reg=0x%x", + port_num, cpld_idx, cpld_port, reg); + reg_val = ingrasys_i2c_cpld_read(cpld_idx, reg); + return reg_val; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_get_qsfp_port_config_val); + +/* provid qsfp port config register write */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_set_qsfp_port_config_val(u8 port_num, + u8 reg_val) +{ + u8 cpld_idx, cpld_port, reg, ret; + + if (INVALID(port_num, QSFP_MIN_PORT_NUM, QSFP_MAX_PORT_NUM)) { + DEBUG_PRINT("invalid input value %d", port_num); + return -1; + } + QSFP_TO_CPLD_IDX(port_num, cpld_idx, cpld_port); + reg = QSFP_PORT_CONFIG_REG(cpld_port); + DEBUG_PRINT("port_num=%d, cpld_idx=%d, cpld_port=%d, reg=0x%x", + port_num, cpld_idx, cpld_port, reg); + ret = ingrasys_i2c_cpld_write(cpld_idx, reg, reg_val); + return ret; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_set_qsfp_port_config_val); + +/* provid sfp port 0/1 status register read */ +int ingrasys_i2c_cpld_get_sfp_port_status_val(void) +{ + u8 cpld_idx, reg; + int reg_val; + + cpld_idx = cpld1; + reg = CPLD_SFP_PORT_STATUS_REG; + DEBUG_PRINT("cpld_idx=%d, reg=0x%x", + cpld_idx, reg); + reg_val = ingrasys_i2c_cpld_read(cpld_idx, reg); + return reg_val; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_get_sfp_port_status_val); + +/* provid qsfp port config register read */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_get_sfp_port_config_val(void) +{ + u8 cpld_idx, reg; + int reg_val; + + cpld_idx = cpld1; + reg = CPLD_SFP_PORT_CONFIG_REG; + DEBUG_PRINT("cpld_idx=%d, reg=0x%x", + cpld_idx, reg); + reg_val = ingrasys_i2c_cpld_read(cpld_idx, reg); + return reg_val; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_get_sfp_port_config_val); + +/* provid qsfp port config register write */ +/* port_num indicate the front panel qsfp port number */ +int ingrasys_i2c_cpld_set_sfp_port_config_val(u8 reg_val) +{ + u8 cpld_idx, reg, ret; + + cpld_idx = cpld1; + reg = CPLD_SFP_PORT_CONFIG_REG; + DEBUG_PRINT("cpld_idx=%d, reg=0x%x", + cpld_idx, reg); + ret = ingrasys_i2c_cpld_write(cpld_idx, reg, reg_val); + return ret; +} +EXPORT_SYMBOL(ingrasys_i2c_cpld_set_sfp_port_config_val); + +static int __init ingrasys_i2c_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&ingrasys_i2c_cpld_driver); +} + +static void __exit ingrasys_i2c_cpld_exit(void) +{ + i2c_del_driver(&ingrasys_i2c_cpld_driver); +} + +MODULE_AUTHOR("Leo Lin "); +MODULE_DESCRIPTION("ingrasys_i2c_cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(ingrasys_i2c_cpld_init); +module_exit(ingrasys_i2c_cpld_exit); + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_i2c_cpld.h b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_i2c_cpld.h new file mode 100644 index 000000000000..8d1df5dee49d --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_i2c_cpld.h @@ -0,0 +1,338 @@ +/* header file for i2c cpld driver of ingrasys_s9280_64x + * + * Copyright (C) 2017 Ingrasys Technology Corporation. + * Leo Lin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef INGRASYS_S9280_64X_I2C_CPLD_H +#define INGRASYS_S9280_64X_I2C_CPLD_H + +/* CPLD device index value */ +enum cpld_id { + cpld1, + cpld2, + cpld3, + cpld4, + cpld5 +}; + +enum LED_BLINK { + BLINK, + NOBLINK, +}; + +enum LED_YELLOW { + YELLOW_OFF, + YELLOW_ON, +}; + +enum LED_GREEN { + GREEN_OFF, + GREEN_ON, +}; + +/* port number on CPLD */ +#define CPLD_1_PORT_NUM 12 +#define CPLD_2_PORT_NUM 13 + +/* QSFP port number */ +#define QSFP_MAX_PORT_NUM 64 +#define QSFP_MIN_PORT_NUM 1 + +/* SFP+ port number */ +#define SFP_MAX_PORT_NUM 2 +#define SFP_MIN_PORT_NUM 1 + + +/* CPLD registers */ +#define CPLD_BOARD_TYPE_REG 0x0 +#define CPLD_EXT_BOARD_TYPE_REG 0x7 +#define CPLD_VERSION_REG 0x1 +#define CPLD_ID_REG 0x2 +#define CPLD_QSFP_PORT_STATUS_BASE_REG 0x20 +#define CPLD_QSFP_PORT_CONFIG_BASE_REG 0x30 +#define CPLD_QSFP_PORT_INTERRUPT_REG 0x40 +#define CPLD_SFP_PORT_STATUS_REG 0x2F +#define CPLD_SFP_PORT_CONFIG_REG 0x3F +#define CPLD_QSFP_PORT_INTERRUPT_REG 0x40 +#define CPLD_10GMUX_CONFIG_REG 0x41 +#define CPLD_BMC_STATUS_REG 0x42 +#define CPLD_BMC_WATCHDOG_REG 0x43 +#define CPLD_USB_STATUS_REG 0x44 +#define CPLD_RESET_CONTROL_REG 0x4A +#define CPLD_SFP_LED_REG 0x80 +#define CPLD_SFP_LED_BLINK_REG 0x90 +#define CPLD_QSFP_LED_BASE_REG 0x80 +#define CPLD_QSFP_LED_BLINK_BASE_REG 0x90 +#define CPLD_RTMR_RESET_REG 0x4B +#define CPLD_ROV_STATUS_REG 0x4C + +/* bit definition for register value */ +enum CPLD_QSFP_PORT_STATUS_BITS { + CPLD_QSFP_PORT_STATUS_INT_BIT, + CPLD_QSFP_PORT_STATUS_ABS_BIT, +}; +enum CPLD_QSFP_PORT_CONFIG_BITS { + CPLD_QSFP_PORT_CONFIG_RESET_BIT, + CPLD_QSFP_PORT_CONFIG_RESERVE_BIT, + CPLD_QSFP_PORT_CONFIG_LPMODE_BIT, +}; +enum CPLD_SFP_PORT_STATUS_BITS { + CPLD_SFP0_PORT_STATUS_PRESENT_BIT, + CPLD_SFP0_PORT_STATUS_TXFAULT_BIT, + CPLD_SFP0_PORT_STATUS_RXLOS_BIT, + CPLD_SFP_PORT_STATUS_DUMMY, + CPLD_SFP1_PORT_STATUS_PRESENT_BIT, + CPLD_SFP1_PORT_STATUS_TXFAULT_BIT, + CPLD_SFP1_PORT_STATUS_RXLOS_BIT, +}; +enum CPLD_SFP_PORT_CONFIG_BITS { + CPLD_SFP0_PORT_CONFIG_TXDIS_BIT, + CPLD_SFP0_PORT_CONFIG_RS_BIT, + CPLD_SFP0_PORT_CONFIG_TS_BIT, + CPLD_SFP_PORT_CONFIG_DUMMY, + CPLD_SFP1_PORT_CONFIG_TXDIS_BIT, + CPLD_SFP1_PORT_CONFIG_RS_BIT, + CPLD_SFP1_PORT_CONFIG_TS_BIT, + +}; +enum CPLD_10GMUX_CONFIG_BITS { + CPLD_10GMUX_CONFIG_ENSMB_BIT, + CPLD_10GMUX_CONFIG_ENINPUT_BIT, + CPLD_10GMUX_CONFIG_SEL1_BIT, + CPLD_10GMUX_CONFIG_SEL0_BIT, +}; +enum CPLD_BMC_WATCHDOG_BITS { + CPLD_10GMUX_CONFIG_ENTIMER_BIT, + CPLD_10GMUX_CONFIG_TIMEOUT_BIT, +}; +enum CPLD_RESET_CONTROL_BITS { + CPLD_RESET_CONTROL_SWRST_BIT, + CPLD_RESET_CONTROL_CP2104RST_BIT, + CPLD_RESET_CONTROL_82P33814RST_BIT, + CPLD_RESET_CONTROL_BMCRST_BIT, +}; +enum CPLD_SFP_LED_BITS { + CPLD_SFP_LED_SFP0_GREEN_BIT, + CPLD_SFP_LED_SFP0_YELLOW_BIT, + CPLD_SFP_LED_SFP1_GREEN_BIT, + CPLD_SFP_LED_SFP1_YELLOW_BIT, +}; +enum CPLD_SFP_LED_BLINK_BITS { + CPLD_SFP_LED_BLINK_SFP0_BIT, + CPLD_SFP_LED_BLINK_SFP1_BIT, +}; +enum CPLD_QSFP_LED_BITS { + CPLD_QSFP_LED_CHAN_0_GREEN_BIT, + CPLD_QSFP_LED_CHAN_0_YELLOW_BIT, + CPLD_QSFP_LED_CHAN_1_GREEN_BIT, + CPLD_QSFP_LED_CHAN_1_YELLOW_BIT, + CPLD_QSFP_LED_CHAN_2_GREEN_BIT, + CPLD_QSFP_LED_CHAN_2_YELLOW_BIT, + CPLD_QSFP_LED_CHAN_3_GREEN_BIT, + CPLD_QSFP_LED_CHAN_3_YELLOW_BIT, + +}; +enum CPLD_QSFP_LED_BLINK_BITS { + CPLD_QSFP_LED_BLINK_X_CHAN0_BIT, + CPLD_QSFP_LED_BLINK_X_CHAN1_BIT, + CPLD_QSFP_LED_BLINK_X_CHAN2_BIT, + CPLD_QSFP_LED_BLINK_X_CHAN3_BIT, + CPLD_QSFP_LED_BLINK_XPLUS_CHAN0_BIT, + CPLD_QSFP_LED_BLINK_XPLUS_CHAN1_BIT, + CPLD_QSFP_LED_BLINK_XPLUS_CHAN2_BIT, + CPLD_QSFP_LED_BLINK_XPLUS_CHAN3_BIT, +}; + +/* bit field structure for register value */ +struct cpld_reg_board_type_t { + u8 build_rev:2; + u8 hw_rev:2; + u8 board_id:4; +}; + +struct cpld_reg_version_t { + u8 revision:6; + u8 release:1; + u8 reserve:1; +}; + +struct cpld_reg_id_t { + u8 id:3; + u8 release:5; +}; + +/* common manipulation */ +#define INVALID(i, min, max) ((i < min) || (i > max) ? 1u : 0u) +#define READ_BIT(val, bit) ((0u == (val & (1<bf_name) +#define READ_BF_1(bf_struct, val, bf_name, bf_value) \ + bf_struct bf; \ + bf.data = val; \ + bf_value = bf.bf_name +#define BOARD_TYPE_BUILD_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, build_rev, res) +#define BOARD_TYPE_HW_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, hw_rev, res) +#define BOARD_TYPE_BOARD_ID_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, board_id, res) +#define CPLD_VERSION_REV_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, revision, res) +#define CPLD_VERSION_REL_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, release, res) +#define CPLD_ID_ID_GET(val, res) \ + READ_BF(cpld_reg_id_t, val, id, res) +#define CPLD_ID_REL_GET(val, res) \ + READ_BF(cpld_reg_id_t, val, release, res) +/* SFP/QSFP port led registers manipulation */ +#define SFP_LED_TO_CPLD_IDX(sfp_port) cpld1 +#define SFP_LED_REG(sfp_port) CPLD_SFP_LED_REG +#define SFP_LED_BLINK_REG(sfp_port) CPLD_SFP_LED_BLINK_REG +#define QSFP_LED_TO_CPLD_IDX(qsfp_port) \ + ((qsfp_port - 1) / 16 + 2) +#define QSFP_LED_REG(qsfp_port) \ + ((qsfp_port - 1) % 16 + CPLD_QSFP_LED_BASE_REG) +#define QSFP_LED_BLINK_REG(qsfp_port) \ + (((qsfp_port - 1) % 16) / 2 + CPLD_QSFP_LED_BLINK_BASE_REG) +/* QSFP/SFP port status registers manipulation */ +#define QSFP_TO_CPLD_IDX(qsfp_port, cpld_index, cpld_port) \ +{ \ + if (QSFP_MIN_PORT_NUM <= qsfp_port && qsfp_port <= CPLD_1_PORT_NUM) { \ + cpld_index = cpld1; \ + cpld_port = qsfp_port - 1; \ + } else if (CPLD_1_PORT_NUM < qsfp_port \ + && qsfp_port <= QSFP_MAX_PORT_NUM) { \ + cpld_index = cpld2 + (qsfp_port - 1 - CPLD_1_PORT_NUM) \ + / CPLD_2_PORT_NUM; \ + cpld_port = (qsfp_port - 1 - CPLD_1_PORT_NUM) % \ + CPLD_2_PORT_NUM; \ + } else { \ + cpld_index = 0; \ + cpld_port = 0; \ + } \ +} +#define QSFP_PORT_STATUS_REG(cpld_port) \ + (CPLD_QSFP_PORT_STATUS_BASE_REG + cpld_port) +#define QSFP_PORT_CONFIG_REG(cpld_port) \ + (CPLD_QSFP_PORT_CONFIG_BASE_REG + cpld_port) +#define QSFP_PORT_INT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_INT_BIT) +#define QSFP_PORT_ABS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_ABS_BIT) +#define QSFP_PORT_RESET_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_RESET_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_RESET_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_LPMODE_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define SFP_PORT_PRESENT_BIT_GET(sfp_port, port_status_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + READ_BIT(port_status_value, CPLD_SFP0_PORT_STATUS_PRESENT_BIT); \ + } else { \ + READ_BIT(port_status_value, CPLD_SFP1_PORT_STATUS_PRESENT_BIT); \ + } +#define SFP_PORT_TXFAULT_BIT_GET(sfp_port, port_status_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + READ_BIT(port_status_value, CPLD_SFP0_PORT_STATUS_TXFAULT_BIT); \ + } else { \ + READ_BIT(port_status_value, CPLD_SFP1_PORT_STATUS_TXFAULT_BIT); \ + } +#define SFP_PORT_RXLOS_BIT_GET(sfp_port, port_status_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + READ_BIT(port_status_value, CPLD_SFP0_PORT_STATUS_RXLOS_BIT); \ + } else { \ + READ_BIT(port_status_value, CPLD_SFP1_PORT_STATUS_RXLOS_BIT); \ + } +#define SFP_PORT_TXDIS_BIT_GET(sfp_port, port_config_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + READ_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_TXDIS_BIT); \ + } else { \ + READ_BIT(port_config_value, CPLD_SFP1_PORT_STATUS_RXLOS_BIT); \ + } +#define SFP_PORT_RS_BIT_GET(sfp_port, port_config_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + READ_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_RS_BIT); \ + } else { \ + READ_BIT(port_config_value, CPLD_SFP1_PORT_CONFIG_RS_BIT); \ + } +#define SFP_PORT_TS_BIT_GET(sfp_port, port_config_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + READ_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_TS_BIT); \ + } else { \ + READ_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_TS_BIT); \ + } +#define SFP_PORT_TXDIS_BIT_SET(sfp_port, port_config_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + SET_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_TXDIS_BIT); \ + } else { \ + SET_BIT(port_config_value, CPLD_SFP1_PORT_CONFIG_TXDIS_BIT); \ + } +#define SFP_PORT_TXDIS_BIT_CLEAR(sfp_port, port_config_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + CLEAR_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_TXDIS_BIT); \ + } else { \ + CLEAR_BIT(port_config_value, CPLD_SFP1_PORT_CONFIG_TXDIS_BIT); \ + } +#define SFP_PORT_RS_BIT_SET(sfp_port, port_config_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + SET_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_RS_BIT); \ + } else { \ + SET_BIT(port_config_value, CPLD_SFP1_PORT_CONFIG_RS_BIT); \ + } +#define SFP_PORT_RS_BIT_CLEAR(sfp_port, port_config_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + CLEAR_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_RS_BIT); \ + } else { \ + CLEAR_BIT(port_config_value, CPLD_SFP1_PORT_CONFIG_RS_BIT); \ + } +#define SFP_PORT_TS_BIT_SET(sfp_port, port_config_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + SET_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_TS_BIT); \ + } else { \ + SET_BIT(port_config_value, CPLD_SFP1_PORT_CONFIG_TS_BIT); \ + } +#define SFP_PORT_TS_BIT_CLEAR(sfp_port, port_config_value) \ + if (sfp_port == SFP_MIN_PORT_NUM) { \ + CLEAR_BIT(port_config_value, CPLD_SFP0_PORT_CONFIG_TS_BIT); \ + } else { \ + CLEAR_BIT(port_config_value, CPLD_SFP1_PORT_CONFIG_TS_BIT); \ + } + +/* CPLD access functions */ +extern int ingrasys_i2c_cpld_get_qsfp_port_status_val(u8 port_num); +extern int ingrasys_i2c_cpld_get_qsfp_port_config_val(u8 port_num); +extern int ingrasys_i2c_cpld_set_qsfp_port_config_val(u8 port_num, u8 reg_val); +extern int ingrasys_i2c_cpld_get_sfp_port_status_val(void); +extern int ingrasys_i2c_cpld_get_sfp_port_config_val(void); +extern int ingrasys_i2c_cpld_set_sfp_port_config_val(u8 reg_val); +extern u8 fp_port_to_phy_port(u8 fp_port); +#endif + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_platform.h b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_platform.h new file mode 100644 index 000000000000..08f14c0bd96b --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_platform.h @@ -0,0 +1,158 @@ +#ifndef _S9230_64X_PLATFORM_H +#define _S9230_64X_PLATFORM_H + +#include + +// remove debug before release +#define DEBUG + +enum bus_order { + I2C_BUS_MAIN, + MUX_9548_0_CH0, + MUX_9548_0_CH1, + MUX_9548_0_CH2, + MUX_9548_0_CH3, + MUX_9548_0_CH4, + MUX_9548_0_CH5, + MUX_9548_0_CH6, + MUX_9548_0_CH7, + MUX_9548_1_CH0, + MUX_9548_1_CH1, + MUX_9548_1_CH2, + MUX_9548_1_CH3, + MUX_9548_1_CH4, + MUX_9548_1_CH5, + MUX_9548_1_CH6, + MUX_9548_1_CH7, + MUX_9548_2_CH0, + MUX_9548_2_CH1, + MUX_9548_2_CH2, + MUX_9548_2_CH3, + MUX_9548_2_CH4, + MUX_9548_2_CH5, + MUX_9548_2_CH6, + MUX_9548_2_CH7, + MUX_9546_0_CH0, + MUX_9546_0_CH1, + MUX_9546_0_CH2, + MUX_9546_0_CH3, + MUX_9546_1_CH0, + MUX_9546_1_CH1, + MUX_9546_1_CH2, + MUX_9546_1_CH3, + MUX_9548_11_CH0, + MUX_9548_11_CH1, + MUX_9548_11_CH2, + MUX_9548_11_CH3, + MUX_9548_11_CH4, + MUX_9548_11_CH5, + MUX_9548_11_CH6, + MUX_9548_11_CH7, + MUX_9548_3_CH0, + MUX_9548_3_CH1, + MUX_9548_3_CH2, + MUX_9548_3_CH3, + MUX_9548_3_CH4, + MUX_9548_3_CH5, + MUX_9548_3_CH6, + MUX_9548_3_CH7, + MUX_9548_4_CH0, + MUX_9548_4_CH1, + MUX_9548_4_CH2, + MUX_9548_4_CH3, + MUX_9548_4_CH4, + MUX_9548_4_CH5, + MUX_9548_4_CH6, + MUX_9548_4_CH7, + MUX_9548_5_CH0, + MUX_9548_5_CH1, + MUX_9548_5_CH2, + MUX_9548_5_CH3, + MUX_9548_5_CH4, + MUX_9548_5_CH5, + MUX_9548_5_CH6, + MUX_9548_5_CH7, + MUX_9548_6_CH0, + MUX_9548_6_CH1, + MUX_9548_6_CH2, + MUX_9548_6_CH3, + MUX_9548_6_CH4, + MUX_9548_6_CH5, + MUX_9548_6_CH6, + MUX_9548_6_CH7, + MUX_9548_7_CH0, + MUX_9548_7_CH1, + MUX_9548_7_CH2, + MUX_9548_7_CH3, + MUX_9548_7_CH4, + MUX_9548_7_CH5, + MUX_9548_7_CH6, + MUX_9548_7_CH7, + MUX_9548_8_CH0, + MUX_9548_8_CH1, + MUX_9548_8_CH2, + MUX_9548_8_CH3, + MUX_9548_8_CH4, + MUX_9548_8_CH5, + MUX_9548_8_CH6, + MUX_9548_8_CH7, + MUX_9548_9_CH0, + MUX_9548_9_CH1, + MUX_9548_9_CH2, + MUX_9548_9_CH3, + MUX_9548_9_CH4, + MUX_9548_9_CH5, + MUX_9548_9_CH6, + MUX_9548_9_CH7, + MUX_9548_10_CH0, + MUX_9548_10_CH1, + MUX_9548_10_CH2, + MUX_9548_10_CH3, + MUX_9548_10_CH4, + MUX_9548_10_CH5, + MUX_9548_10_CH6, + MUX_9548_10_CH7, +}; + +#define I2C_ADDR_MUX_9555_0 (0x20) +#define I2C_ADDR_MUX_9555_1 (0x24) +#define I2C_ADDR_MUX_9555_2 (0x25) +#define I2C_ADDR_MUX_9555_3 (0x26) +#define I2C_ADDR_MUX_9539_0 (0x76) +#define I2C_ADDR_MUX_9539_1 (0x76) +#define I2C_BUS_FAN_STATUS (I2C_BUS_MAIN) +#define I2C_BUS_SYS_LED (MUX_9548_1_CH1) +#define I2C_BUS_PSU_STATUS (I2C_BUS_MAIN) +#define I2C_ADDR_PSU_STATUS (I2C_ADDR_MUX_9555_2) + +#define NUM_OF_I2C_MUX (11) +#define NUM_OF_CPLD (5) +#define NUM_OF_QSFP_PORT (64) +#define NUM_OF_SFP_PORT (2) +#define QSFP_EEPROM_I2C_ADDR (0x50) + +enum gpio_reg { + REG_PORT0_IN, + REG_PORT1_IN, + REG_PORT0_OUT, + REG_PORT1_OUT, + REG_PORT0_POL, + REG_PORT1_POL, + REG_PORT0_DIR, + REG_PORT1_DIR, +}; + +struct ing_i2c_board_info { + int ch; + int size; + struct i2c_board_info *board_info; +}; + +struct i2c_init_data { + __u16 ch; + __u16 addr; + __u8 reg; + __u8 value; +}; + +#endif diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_psu.c b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_psu.c new file mode 100644 index 000000000000..c2537bf40858 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/modules/ingrasys_s9280_64x_psu.c @@ -0,0 +1,394 @@ +/* + * S9280-64x PSU driver + * + * Copyright (C) 2017 Ingrasys, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ingrasys_s9280_64x_platform.h" + +static ssize_t show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf); +static struct s9280_psu_data *s9280_psu_update_status(struct device *dev); +static struct s9280_psu_data *s9280_psu_update_eeprom(struct device *dev); +static int s9280_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len); + + +#define DRIVER_NAME "psu" + +// Addresses scanned +static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; + +/* PSU EEPROM SIZE */ +#define EEPROM_SZ 256 +#define READ_EEPROM 1 +#define NREAD_EEPROM 0 + +static struct i2c_client pca9555_client; + +/* pca9555 gpio pin mapping */ +#define PSU2_PWROK 0 +#define PSU2_PRSNT_L 1 +#define PSU2_PWRON_L 2 +#define PSU1_PWROK 3 +#define PSU1_PRSNT_L 4 +#define PSU1_PWRON_L 5 +#define TMP_75_INT_L 6 + +/* Driver Private Data */ +struct s9280_psu_data { + struct mutex lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + s32 status; /* IO expander value */ + char eeprom[EEPROM_SZ]; /* psu eeprom data */ + char psuABS; /* PSU absent */ + char psuPG; /* PSU power good */ +}; + +enum psu_index +{ + s9280_psu1, + s9280_psu2 +}; + +/* + * display power good attribute + */ +static ssize_t +show_psu_pg(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s9280_psu_data *data = s9280_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuPG; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + +/* + * display power absent attribute + */ +static ssize_t +show_psu_abs(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s9280_psu_data *data = s9280_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuABS; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + + +/* + * sysfs attributes for psu + */ +static DEVICE_ATTR(psu_pg, S_IRUGO, show_psu_pg, NULL); +static DEVICE_ATTR(psu_abs, S_IRUGO, show_psu_abs, NULL); +static DEVICE_ATTR(psu_eeprom, S_IRUGO, show_psu_eeprom, NULL); + +static struct attribute *s9280_psu_attributes[] = { + &dev_attr_psu_pg.attr, + &dev_attr_psu_abs.attr, + &dev_attr_psu_eeprom.attr, + NULL +}; + +/* + * display psu eeprom content + */ +static ssize_t +show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct s9280_psu_data *data = s9280_psu_update_eeprom(dev); + + memcpy(buf, (char *)data->eeprom, EEPROM_SZ); + return EEPROM_SZ; +} + +static const struct attribute_group s9280_psu_group = { + .attrs = s9280_psu_attributes, +}; + +/* + * check gpio expander is accessible + */ +static int +pca9555_detect(struct i2c_client *client) +{ + if (i2c_smbus_read_byte_data(client, REG_PORT0_DIR) < 0) { + return -ENODEV; + } + + return 0; +} + +/* + * client init + */ +static void +i2c_devices_client_address_init(struct i2c_client *client) +{ + pca9555_client = *client; + + /* get i2c adapter for the target */ + pca9555_client.adapter = i2c_get_adapter(I2C_BUS_PSU_STATUS); + + /* get the i2c addr for the target */ + pca9555_client.addr = I2C_ADDR_PSU_STATUS; +} + +static int +s9280_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct s9280_psu_data *data; + int status, err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct s9280_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct s9280_psu_data)); + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->lock); + + i2c_devices_client_address_init(client); + + err = pca9555_detect(&pca9555_client); + if (err) { + return err; + } + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &s9280_psu_group); + if (status) { + goto exit_free; + } + + return 0; + +exit_free: + kfree(data); +exit: + + return status; +} + +static int +s9280_psu_remove(struct i2c_client *client) +{ + struct s9280_psu_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &s9280_psu_group); + kfree(data); + + /* free i2c adapter */ + i2c_put_adapter(pca9555_client.adapter); + + return 0; +} + + +/* + * psu eeprom read utility + */ +static int +s9280_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len) +{ + int i=0, ret=0; + int blk_max = 32; //max block read size + + /* read eeprom, 32 * 8 = 256 bytes */ + for (i=0; i < EEPROM_SZ/blk_max; i++) { + ret = i2c_smbus_read_i2c_block_data(client, (i*blk_max), blk_max, + data + (i*blk_max)); + if (ret < 0) { + return ret; + } + } + return ret; +} + +/* + * update eeprom content + */ +static struct s9280_psu_data +*s9280_psu_update_eeprom(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s9280_psu_data *data = i2c_get_clientdata(client); + s32 status = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + if (time_after(jiffies, data->last_updated + 300 * HZ) + || !data->valid) { + + /* Read psu status */ + + status = i2c_smbus_read_word_data(&(pca9555_client), REG_PORT0_IN); + data->status = status; + + /*read psu status from io expander*/ + + if (data->index == s9280_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (status >> psu_pwrok) & 0x1; + data->psuABS = (status >> psu_prsnt_l) & 0x1; + + /* Read eeprom */ + if (!data->psuABS) { + //clear local eeprom data + memset(data->eeprom, 0, EEPROM_SZ); + + //read eeprom + status = s9280_psu_read_block(client, 0, data->eeprom, + ARRAY_SIZE(data->eeprom)); + + if (status < 0) { + memset(data->eeprom, 0, EEPROM_SZ); + dev_err(&client->dev, "Read eeprom failed, status=(%d)\n", status); + } else { + data->valid = 1; + } + } else { + memset(data->eeprom, 0, EEPROM_SZ); + } + data->last_updated = jiffies; + } + + mutex_unlock(&data->lock); + + return data; +} + +/* + * update psu status + */ +static struct s9280_psu_data +*s9280_psu_update_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s9280_psu_data *data = i2c_get_clientdata(client); + s32 status = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + /* Read psu status */ + + status = i2c_smbus_read_word_data(&(pca9555_client), REG_PORT0_IN); + data->status = status; + + /*read psu status from io expander*/ + + if (data->index == s9280_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (status >> psu_pwrok) & 0x1; + data->psuABS = (status >> psu_prsnt_l) & 0x1; + + mutex_unlock(&data->lock); + + return data; +} + +static const struct i2c_device_id s9280_psu_id[] = { + { "psu1", s9280_psu1 }, + { "psu2", s9280_psu2 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, s9280_psu_id); + +static struct i2c_driver s9280_psu_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = s9280_psu_probe, + .remove = s9280_psu_remove, + .id_table = s9280_psu_id, + .address_list = normal_i2c, +}; + +static int __init s9280_psu_init(void) +{ + return i2c_add_driver(&s9280_psu_driver); +} + +static void __exit s9280_psu_exit(void) +{ + i2c_del_driver(&s9280_psu_driver); +} + +module_init(s9280_psu_init); +module_exit(s9280_psu_exit); + +MODULE_AUTHOR("Leo Lin "); +MODULE_DESCRIPTION("S9280-64X psu driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/service/qsfp-monitor.service b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/service/qsfp-monitor.service new file mode 100644 index 000000000000..c801ad68966d --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/service/qsfp-monitor.service @@ -0,0 +1,15 @@ +[Unit] +Description= This QSFP Monitor service is to setup QSFP SI. +Requires=s9280-64x-monitor.service +After=s9280-64x-monitor.service + +[Service] +ExecStart=/usr/sbin/qsfp_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/service/s9280-64x-monitor.service b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/service/s9280-64x-monitor.service new file mode 100644 index 000000000000..5f22b6164dd0 --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/service/s9280-64x-monitor.service @@ -0,0 +1,19 @@ +[Unit] +Description= This Platform Monitor service is to initialize platform and monitor platform. +Before=platform-monitor.service +After=sysinit.target +Wants=fancontrol.service +Wants=qsfp-monitor.service +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/sbin/i2c_utils.sh i2c_init +ExecStart=/usr/sbin/s9280_64x_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/i2c_utils.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/i2c_utils.sh new file mode 100755 index 000000000000..fcb7b6372efa --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/i2c_utils.sh @@ -0,0 +1,1844 @@ +#!/bin/bash + +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# trun on for more debug output +#DEBUG="on" + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +EXEC_FUNC=${1} +COLOR_LED=${2} +QSFP_PORT=${2} +SFP_PORT=${2} +QSFP_ACTION=${2} +SFP_ACTION=${2} +MB_EEPROM_ACTION=${2} +ONOFF_LED=${3} +FAN_TRAY=${4} + +############################################################ +# Distributor ID: Debian +# Description: Debian GNU/Linux 8.6 (jessie) +# Release: 8.6 +# Codename: jessie +# Linux debian 3.16.0-4-amd64 #1 +# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux +############################################################ + +# Color Definition +COLOR_TITLE="\e[1;32m" ### Green ### +COLOR_WARNING="\e[1;33m" ### Yellow ### +COLOR_ERROR="\e[1;31m" ### Red ### +COLOR_END="\e[0m" ### END ### + +NUM_I801_DEVICE=0 + +# PCA9548#0 0x70 +NUM_MUX_9548_0_CH0=$(( ${NUM_I801_DEVICE} + 1 )) # CPLD1 +NUM_MUX_9548_0_CH1=$(( ${NUM_I801_DEVICE} + 2 )) # CPLD2 +NUM_MUX_9548_0_CH2=$(( ${NUM_I801_DEVICE} + 3 )) # CPLD3 +NUM_MUX_9548_0_CH3=$(( ${NUM_I801_DEVICE} + 4 )) # CPLD4 +NUM_MUX_9548_0_CH4=$(( ${NUM_I801_DEVICE} + 5 )) # CPLD5 +NUM_MUX_9548_0_CH5=$(( ${NUM_I801_DEVICE} + 6 )) # LM75_1 LM75_2 LM86 +NUM_MUX_9548_0_CH6=$(( ${NUM_I801_DEVICE} + 7 )) # LM75_3 LM75_4 + +# PCA9548#1 0x73 +NUM_MUX_9548_1_CH0=$(( ${NUM_I801_DEVICE} + 9 )) # UCD9090 +NUM_MUX_9548_1_CH1=$(( ${NUM_I801_DEVICE} + 10 )) # PCA9539#0 0x76 for FP LED & HW ID +NUM_MUX_9548_1_CH2=$(( ${NUM_I801_DEVICE} + 11 )) # NONE +NUM_MUX_9548_1_CH3=$(( ${NUM_I801_DEVICE} + 12 )) # EEPROM for debug 0x57 +#NUM_MUX_9548_1_CH4=$(( ${NUM_I801_DEVICE} + 13 )) # NONE +NUM_MUX_9548_1_CH5=$(( ${NUM_I801_DEVICE} + 14 )) # CLK gen +NUM_MUX_9548_1_CH6=$(( ${NUM_I801_DEVICE} + 15 )) # ROV +NUM_MUX_9548_1_CH7=$(( ${NUM_I801_DEVICE} + 16 )) # HWM on BMC + +# PCA9546#0 0X72 +NUM_MUX_9546_0_CH0=$(( ${NUM_I801_DEVICE} + 17 )) # PSU1 0x58 +NUM_MUX_9546_0_CH1=$(( ${NUM_I801_DEVICE} + 18 )) # PSU2 0x58 +NUM_MUX_9546_0_CH2=$(( ${NUM_I801_DEVICE} + 19 )) # NONE +NUM_MUX_9546_0_CH3=$(( ${NUM_I801_DEVICE} + 20 )) # NONE + +# PCA9548#2 0X71 +NUM_MUX_9548_2_CH0=$(( ${NUM_I801_DEVICE} + 21 )) # PCA9548#3 0x74 +NUM_MUX_9548_2_CH1=$(( ${NUM_I801_DEVICE} + 22 )) # PCA9548#4 0x74 +NUM_MUX_9548_2_CH2=$(( ${NUM_I801_DEVICE} + 23 )) # PCA9548#5 0x74 +NUM_MUX_9548_2_CH3=$(( ${NUM_I801_DEVICE} + 24 )) # PCA9548#6 0x74 +NUM_MUX_9548_2_CH4=$(( ${NUM_I801_DEVICE} + 25 )) # PCA9548#7 0x74 +NUM_MUX_9548_2_CH5=$(( ${NUM_I801_DEVICE} + 26 )) # PCA9548#8 0x74 +NUM_MUX_9548_2_CH6=$(( ${NUM_I801_DEVICE} + 27 )) # PCA9548#9 0x74 +NUM_MUX_9548_2_CH7=$(( ${NUM_I801_DEVICE} + 28 )) # PCA9548#10 0x74 + + + +# PCA9546#1 0X77 +NUM_MUX_9546_1_CH0=$(( ${NUM_I801_DEVICE} + 29 )) # SFP0 EEPROM 0x50 +NUM_MUX_9546_1_CH1=$(( ${NUM_I801_DEVICE} + 30 )) # SFP1 EEPROM 0x50 +NUM_MUX_9546_1_CH2=$(( ${NUM_I801_DEVICE} + 31 )) # NONE +NUM_MUX_9546_1_CH3=$(( ${NUM_I801_DEVICE} + 32 )) # PCA9539#1 0x76 for sys control + +# PCA9548#11 0X75 +NUM_MUX_9548_11_CH0=$(( ${NUM_I801_DEVICE} + 33 )) # SW upgrade for CPLD1 +NUM_MUX_9548_11_CH1=$(( ${NUM_I801_DEVICE} + 34 )) # SW upgrade for CPLD2 +NUM_MUX_9548_11_CH2=$(( ${NUM_I801_DEVICE} + 35 )) # SW upgrade for CPLD3 +NUM_MUX_9548_11_CH3=$(( ${NUM_I801_DEVICE} + 36 )) # SW upgrade for CPLD4 +NUM_MUX_9548_11_CH4=$(( ${NUM_I801_DEVICE} + 37 )) # SW upgrade for CPLD5 +NUM_MUX_9548_11_CH5=$(( ${NUM_I801_DEVICE} + 38 )) # EEPROM for debug 0x57 +NUM_MUX_9548_11_CH6=$(( ${NUM_I801_DEVICE} + 39 )) # Retimer#0~3 +NUM_MUX_9548_11_CH7=$(( ${NUM_I801_DEVICE} + 40 )) # Retimer#4~7 + +# PCA9548#3~10 0X74 +NUM_MUX_9548_3_CH0=$(( ${NUM_I801_DEVICE} + 41 )) # QSFP 0 EEPROM +NUM_MUX_9548_4_CH0=$(( ${NUM_I801_DEVICE} + 49 )) # QSFP 8 EEPROM +NUM_MUX_9548_5_CH0=$(( ${NUM_I801_DEVICE} + 57 )) # QSFP 16 EEPROM +NUM_MUX_9548_6_CH0=$(( ${NUM_I801_DEVICE} + 65 )) # QSFP 24 EEPROM +NUM_MUX_9548_7_CH0=$(( ${NUM_I801_DEVICE} + 73 )) # QSFP 32 EEPROM +NUM_MUX_9548_8_CH0=$(( ${NUM_I801_DEVICE} + 81 )) # QSFP 40 EEPROM +NUM_MUX_9548_9_CH0=$(( ${NUM_I801_DEVICE} + 89 )) # QSFP 48 EEPROM +NUM_MUX_9548_10_CH0=$(( ${NUM_I801_DEVICE} + 97 )) # QSFP 56 EEPROM + +# MUX Alias +I2C_BUS_MAIN=${NUM_I801_DEVICE} +I2C_BUS_HWM=${NUM_MUX_9548_1_CH7} +I2C_BUS_FAN_STATUS=${I2C_BUS_MAIN} +I2C_BUS_SYS_LED=${NUM_MUX_9548_1_CH1} +I2C_BUS_HW_ID=${NUM_MUX_9548_1_CH1} +I2C_BUS_BMC_HW_ID=${I2C_BUS_MAIN} +I2C_BUS_PSU_STAT=${I2C_BUS_MAIN} +I2C_BUS_FANTRAY_LED=${I2C_BUS_MAIN} +I2C_BUS_MB_EEPROM=${I2C_BUS_MAIN} +I2C_BUS_CB_EEPROM=${I2C_BUS_MAIN} +# TODO: check i2c channel of PSU1/PSU2, it swap in s9230 +I2C_BUS_PSU1_EEPROM=${NUM_MUX_9546_0_CH1} +I2C_BUS_PSU2_EEPROM=${NUM_MUX_9546_0_CH0} +I2C_BUS_CPLD1=${NUM_MUX_9548_0_CH0} +I2C_BUS_CPLD2=${NUM_MUX_9548_0_CH1} +I2C_BUS_CPLD3=${NUM_MUX_9548_0_CH2} +I2C_BUS_CPLD4=${NUM_MUX_9548_0_CH3} +I2C_BUS_CPLD5=${NUM_MUX_9548_0_CH4} +I2C_BUS_ROV=${NUM_MUX_9548_1_CH6} + +# I2C BUS path +PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" +# TODO: need to verify HWM deivce path after board ready +PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon1" +PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_MUX_9548_0_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH0}" +PATH_MUX_9548_0_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH1}" +PATH_MUX_9548_0_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH2}" +PATH_MUX_9548_0_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH3}" +PATH_MUX_9548_0_CH4="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH4}" +PATH_MUX_9548_0_CH5="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH5}" +PATH_MUX_9548_0_CH6="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH6}" +PATH_MUX_9548_0_CH7="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CH7}" +PATH_MUX_9548_1_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH0}" +PATH_MUX_9548_1_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH1}" +PATH_MUX_9548_1_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH2}" +PATH_MUX_9548_1_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH3}" +PATH_MUX_9548_1_CH4="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH4}" +PATH_MUX_9548_1_CH5="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH5}" +PATH_MUX_9548_1_CH6="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH6}" +PATH_MUX_9548_1_CH7="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CH7}" +PATH_MUX_9548_2_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH0}" +PATH_MUX_9548_2_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH1}" +PATH_MUX_9548_2_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH2}" +PATH_MUX_9548_2_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH3}" +PATH_MUX_9548_2_CH4="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH4}" +PATH_MUX_9548_2_CH5="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH5}" +PATH_MUX_9548_2_CH6="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH6}" +PATH_MUX_9548_2_CH7="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CH7}" +PATH_MUX_9546_0_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_0_CH0}" +PATH_MUX_9546_0_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_0_CH1}" +PATH_MUX_9546_0_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_0_CH2}" +PATH_MUX_9546_0_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_0_CH3}" +PATH_MUX_9546_1_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_1_CH0}" +PATH_MUX_9546_1_CH1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_1_CH1}" +PATH_MUX_9546_1_CH2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_1_CH2}" +PATH_MUX_9546_1_CH3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9546_1_CH3}" +PATH_MUX_9548_11_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_11_CH0}" +PATH_MUX_9548_3_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_3_CH0}" +PATH_MUX_9548_4_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_4_CH0}" +PATH_MUX_9548_5_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_5_CH0}" +PATH_MUX_9548_6_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_6_CH0}" +PATH_MUX_9548_7_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_7_CH0}" +PATH_MUX_9548_8_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_8_CH0}" +PATH_MUX_9548_9_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_9_CH0}" +PATH_MUX_9548_10_CH0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_10_CH0}" +PATH_CPLD1_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD1}" +PATH_CPLD2_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD2}" +PATH_CPLD3_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD3}" +PATH_CPLD4_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD4}" +PATH_CPLD5_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CPLD5}" + + +# I2C Address +### I2C MUX +I2C_ADDR_MUX_9548_0=0x70 +I2C_ADDR_MUX_9548_1=0x73 +I2C_ADDR_MUX_9548_2=0x71 +I2C_ADDR_MUX_9546_0=0x72 +I2C_ADDR_MUX_9546_1=0x71 +I2C_ADDR_MUX_9548_11=0x75 +I2C_ADDR_MUX_9548_3=0x74 +I2C_ADDR_MUX_9548_4=0x74 +I2C_ADDR_MUX_9548_5=0x74 +I2C_ADDR_MUX_9548_6=0x74 +I2C_ADDR_MUX_9548_7=0x74 +I2C_ADDR_MUX_9548_8=0x74 +I2C_ADDR_MUX_9548_9=0x74 +I2C_ADDR_MUX_9548_10=0x74 + +### GPIO Expander +I2C_ADDR_MUX_9539_0=0x76 # LED & HW ID +I2C_ADDR_MUX_9539_1=0x76 # SYS config +I2C_ADDR_MUX_9539_2=0x76 # on CPU board, STATUS and ERR from CPLD +I2C_ADDR_MUX_9555_0=0x20 # on FAN board, fan status and led config +I2C_ADDR_MUX_9555_1=0x24 # on BMC board, INT and HW ID +I2C_ADDR_MUX_9555_2=0x25 # on BMC board, PSU status +I2C_ADDR_MUX_9555_3=0x26 # on BMC board, RST and SEL + + +### peripheral +I2C_ADDR_MB_EEPROM=0x55 # on main board +I2C_ADDR_CB_EEPROM=0x51 # on cpu board +I2C_ADDR_UCD9090=0x34 +I2C_ADDR_W83795=0x2F +I2C_ADDR_PSU1_EEPROM=0x50 +I2C_ADDR_PSU2_EEPROM=0x50 +I2C_ADDR_LM75_1=0x4D # Rear Panel +I2C_ADDR_LM75_2=0x4E # Rear MAC +I2C_ADDR_LM86=0x4C # TBD +I2C_ADDR_LM75_3=0x4D # Front Panel +I2C_ADDR_LM75_4=0x4E # Front MAC +I2C_ADDR_TMP75_CB=0x4F # on cpu board +I2C_ADDR_TMP75_BB=0x4A # on bmc board +I2C_ADDR_QSFP_EEPROM=0x50 +I2C_ADDR_SFP_EEPROM=0x50 +I2C_ADDR_CPLD=0x33 +I2C_ADDR_ROV=0x76 + +#sysfs +PATH_SYSFS_PSU1="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU1_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU1_EEPROM)" +PATH_SYSFS_PSU2="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU2_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU2_EEPROM)" + +#ACTIVE LOW enable flag +ACTIVE_LOW_EN=1 +ACTIVE_HIGH_EN=0 +#GPIO Direction In/Out +DIR_IN=in +DIR_OUT=out + +#Power Supply Status +PSU_DC_ON=1 +PSU_DC_OFF=0 +PSU_EXIST=1 +PSU_NOT_EXIST=0 + +# IO expander register +# direction +REG_PORT0_DIR=6 +REG_PORT1_DIR=7 +# polarity +REG_PORT0_POL=4 +REG_PORT1_POL=5 +# output +REG_PORT0_OUT=2 +REG_PORT1_OUT=3 +# input +REG_PORT0_IN=0 +REG_PORT1_IN=1 + +# qsfp port number range +MIN_QSFP_PORT_NUM=1 +MAX_QSFP_PORT_NUM=64 + +# sfp+ port number range +MIN_SFP_PORT_NUM=1 +MAX_SFP_PORT_NUM=2 + +# CPLD access +# ROV status +CPLD_ROV_STATUS_KEY=cpld_rov_status +# port status +CPLD_QSFP_STATUS_KEY=cpld_qsfp_port_status +CPLD_SFP_STATUS_KEY=cpld_sfp_port_status +# bit define +CPLD_QSFP_STATUS_ABS_BIT=1 +CPLD_SFP0_STATUS_PRES_BIT=0 +CPLD_SFP1_STATUS_PRES_BIT=4 + +# fp port to phy port mapping +fp2phy_array=( 0 1 4 5 8 9 12 13 16 17 20 21 24 25 28 29 + 32 33 36 37 40 41 44 45 48 49 52 53 56 57 60 61 + 2 3 6 7 10 11 14 15 18 19 22 23 26 27 30 31 + 34 35 38 39 42 43 46 47 50 51 54 55 58 59 62 63) +# fp port to led port mapping +fp2led_array=( 1 2 5 6 9 10 13 14 1 2 5 6 9 10 13 14 + 1 2 5 6 9 10 13 14 1 2 5 6 9 10 13 14 + 3 4 7 8 11 12 15 16 3 4 7 8 11 12 15 16 + 3 4 7 8 11 12 15 16 3 4 7 8 11 12 15 16) +# vdd value for mac +rov_val_array=( 0.85 0.82 0.77 0.87 0.74 0.84 0.79 0.89 ) +rov_reg_array=( 0x79 0x73 0x69 0x7D 0x63 0x77 0x6D 0x81 ) + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} i2c_init" + echo " : ${0} i2c_deinit" + echo " : ${0} i2c_fan_speed_init" + echo " : ${0} i2c_io_exp_init" + echo " : ${0} i2c_led_test" + echo " : ${0} i2c_psu_eeprom_get" + echo " : ${0} i2c_mb_eeprom_get" + echo " : ${0} i2c_cb_eeprom_get" + echo " : ${0} i2c_qsfp_eeprom_get [${MIN_QSFP_PORT_NUM}-${MAX_QSFP_PORT_NUM}]" + echo " : ${0} i2c_sfp_eeprom_get [${MIN_SFP_PORT_NUM}-${MAX_SFP_PORT_NUM}]" + echo " : ${0} i2c_qsfp_eeprom_init new|delete" + echo " : ${0} i2c_sfp_eeprom_init new|delete" + echo " : ${0} i2c_mb_eeprom_init new|delete" + echo " : ${0} i2c_cb_eeprom_init new|delete" + echo " : ${0} i2c_qsfp_status_get [${MIN_QSFP_PORT_NUM}-${MAX_QSFP_PORT_NUM}]" + echo " : ${0} i2c_sfp_status_get [${MIN_SFP_PORT_NUM}-${MAX_SFP_PORT_NUM}]" + echo " : ${0} i2c_qsfp_type_get [${MIN_QSFP_PORT_NUM}-${MAX_QSFP_PORT_NUM}]" + echo " : ${0} i2c_sfp_type_get [${MIN_SFP_PORT_NUM}-${MAX_SFP_PORT_NUM}]" + echo " : ${0} i2c_board_type_get" + echo " : ${0} i2c_bmc_board_type_get" + echo " : ${0} i2c_cpld_version" + echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_psu_status_set" + echo " : ${0} i2c_led_fan_status_set" + echo " : ${0} i2c_led_fan_tray_status_set" + echo " : ${0} i2c_test_all" + echo " : ${0} i2c_sys_led green|amber" + echo " : ${0} i2c_fan_led green|amber|off" + echo " : ${0} i2c_psu1_led green|amber|off" + echo " : ${0} i2c_psu2_led green|amber|off" + echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]" + echo "----------------------------------------------------" +} + +#Pause function +function _pause { + read -p "$*" +} + +#Retry command function +function _retry { + local i + for i in {1..5}; + do + echo "${*}" + eval "${*}" && break || echo "retry"; sleep 1; + done +} + +# front panel port to physical port mapping +function _port_fp2phy { + + local fp_port=$1 + local phy_port=0 + local index=$((${fp_port} - 1)) + # change to 1 base index for internal use + phy_port=$((${fp2phy_array[$index]} + 1)) + #phy_port=${fp2phy_array[$index]} + + echo $phy_port +} + +#front panel port to led port mapping +function _port_fp2led { + + local logic_port=$1 + local led_port=0 + led_port=${fp2led_array[$logic_port]} + + echo $led_port +} + +#I2C Init +function _i2c_init { + echo "=========================================================" + echo "# Description: I2C Init" + echo "=========================================================" + + #remove optoe module + rmmod optoe + + #rmmod i2c_ismt + _util_rmmod i2c_i801 + modprobe i2c_i801 + modprobe i2c_dev + modprobe i2c_mux_pca954x force_deselect_on_exit=1 + + # add MUX PCA9548#0 on I801, assume to be i2c-1~8 + if [ ! -e ${PATH_MUX_9548_0_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_0}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_0} already init." + fi + + # add MUX PCA9548#1 on I801, assume to be i2c-9~16 + if [ ! -e ${PATH_MUX_9548_1_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_1}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_1} already init." + fi + + # add MUX PCA9546#0 on I801, assume to be i2c-17~20 + if [ ! -e ${PATH_MUX_9546_0_CH0} ]; then + _retry "echo 'pca9546 ${I2C_ADDR_MUX_9546_0}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9546 ${I2C_ADDR_MUX_9546_0} already init." + fi + + # add MUX PCA9548#2 on I801, assume to be i2c-21~28 + if [ ! -e ${PATH_MUX_9548_2_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_2}' > ${PATH_MUX_9546_0_CH2}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_2} already init." + fi + + # add MUX PCA9546#1 on I801, assume to be i2c-29~32 + if [ ! -e ${PATH_MUX_9546_1_CH0} ]; then + _retry "echo 'pca9546 ${I2C_ADDR_MUX_9546_1}' > ${PATH_MUX_9546_0_CH3}/new_device" + else + echo "pca9546 ${I2C_ADDR_MUX_9546_1} already init." + fi + + # add MUX PCA9548#11 on I801, assume to be i2c-33~40 + if [ ! -e ${PATH_MUX_9548_11_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_11}' > ${PATH_I801_DEVICE}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_11} already init." + fi + + # add MUX PCA9548#3 on PCA9548#2 CH0, assume to be i2c-41~48 + if [ ! -e ${PATH_MUX_9548_3_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_3}' > ${PATH_MUX_9548_2_CH0}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_4} already init." + fi + + # add MUX PCA9548#4 on PCA9548#2 CH1, assume to be i2c-49~56 + if [ ! -e ${PATH_MUX_9548_4_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_4}' > ${PATH_MUX_9548_2_CH1}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_4} already init." + fi + + # add MUX PCA9548#5 on PCA9548#2 CH2, assume to be i2c-57~64 + if [ ! -e ${PATH_MUX_9548_5_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_5}' > ${PATH_MUX_9548_2_CH2}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_5} already init." + fi + + # add MUX PCA9548#6 on PCA9548#2 CH3, assume to be i2c-65~72 + if [ ! -e ${PATH_MUX_9548_6_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_6}' > ${PATH_MUX_9548_2_CH3}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_6} already init." + fi + + # add MUX PCA9548#7 on PCA9548#2 CH4, assume to be i2c-73~80 + if [ ! -e ${PATH_MUX_9548_7_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_7}' > ${PATH_MUX_9548_2_CH4}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_7} already init." + fi + + # add MUX PCA9548#8 on PCA9548#2 CH5, assume to be i2c-81~88 + if [ ! -e ${PATH_MUX_9548_8_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_8}' > ${PATH_MUX_9548_2_CH5}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_8} already init." + fi + + # add MUX PCA9548#9 on PCA9548#2 CH6, assume to be i2c-89~96 + if [ ! -e ${PATH_MUX_9548_9_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_9}' > ${PATH_MUX_9548_2_CH6}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_9} already init." + fi + + # add MUX PCA9548#10 on PCA9548#2 CH7, assume to be i2c-97~104 + if [ ! -e ${PATH_MUX_9548_10_CH0} ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_10}' > ${PATH_MUX_9548_2_CH7}/new_device" + else + echo "pca9548 ${I2C_ADDR_MUX_9548_10} already init." + fi + + _i2c_hwm_init + _util_rmmod eeprom + modprobe eeprom_mb + modprobe gpio-pca953x + _i2c_io_exp_init + _i2c_sensors_init + _i2c_cpld_init + _i2c_psu_init + + _i2c_qsfp_eeprom_init "new" + _i2c_sfp_eeprom_init "new" + _i2c_mb_eeprom_init "new" + _i2c_cb_eeprom_init "new" + _i2c_fan_speed_init + _i2c_led_psu_status_set + _i2c_led_fan_status_set + + # clear port led + _util_port_led_clear + + # rov for mac init + _mac_vdd_init + + # trun on sys led + echo "led_sys setup..." + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + + _config_rmem +} + +function _mac_vdd_init { + # read mac vid register value from CPLD + cpld_index=1 + _i2c_cpld_reg_read ${cpld_index} ${CPLD_ROV_STATUS_KEY} + # get vid form register value [0:2] + vid=$(($cpld_reg_val & 0x7)) + # get rov val and reg according to vid + rov_val=${rov_val_array[$vid]} + rov_reg=${rov_reg_array[$vid]} + echo "vid=${vid}, rov_val=${rov_val}, rov_reg=${rov_reg}" + + # write the rov reg to rov + i2cset -y -r ${I2C_BUS_ROV} ${I2C_ADDR_ROV} 0x21 ${rov_reg} w + + if [ $? -eq 0 ]; then + echo "set ROV for mac vdd done" + else + echo "set ROV for mac vdd fail" + fi +} + +#I2C Deinit +function _i2c_deinit { + echo "i2c deinit..." + for mod in coretemp jc42 w83795 ingrasys_s9280_64x_psu ingrasys_s9280_64x_i2c_cpld eeprom eeprom_mb gpio-pca953x i2c_mux_pca954x i2c_i801; + do + _util_rmmod $mod + done + echo "Done" +} + +function _i2c_cpld_init { + echo "CPLD init..." + _util_rmmod ingrasys_s9280_64x_i2c_cpld + modprobe ingrasys_s9280_64x_i2c_cpld + + # add cpld 1~5 to sysfs + for i in {1..5}; + do + local cpld_bus="I2C_BUS_CPLD${i}" + local cpld_path="PATH_CPLD${i}_DEVICE" + dev_path="${PATH_SYS_I2C_DEVICES}/${!cpld_bus}-$(printf "%04x" ${I2C_ADDR_CPLD})" + if ! [ -L ${dev_path} ]; then + echo "ingrasys_cpld${i} ${I2C_ADDR_CPLD}" > ${!cpld_path}/new_device + else + echo "${dev_path} already exist" + fi + done + + echo "Done" +} + +function _i2c_sensors_init { + echo "SENSORS init..." + local dev_path + # to make sure hwmon index in sysfs as expected, + # need to remove kernel module and then probe them in expected order + # remove all sensors kernel module + _util_rmmod coretemp + _util_rmmod jc42 + _util_rmmod w83795 + # probe coretemp kernel module + modprobe coretemp #hwmon0 + # probe hwmon kernel module + modprobe w83795 + # add w83795 to sysfs + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_1_CH7}-$(printf "%04x" ${I2C_ADDR_W83795})" + if ! [ -L ${dev_path} ]; then + echo "w83795adg ${I2C_ADDR_W83795}" > ${PATH_MUX_9548_1_CH7}/new_device #hwmon1 + sleep 0.1 + else + echo "${dev_path} already exist" + fi + # add lm75/lm86 to sysfs + ####Main board thermal + ####lm75_1 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH5}-$(printf "%04x" ${I2C_ADDR_LM75_1})" + if ! [ -L ${dev_path} ]; then + echo "lm75 ${I2C_ADDR_LM75_1}" > ${PATH_MUX_9548_0_CH5}/new_device # hwmon2 + sleep 0.1 + else + echo "${dev_path} already exist" + fi + ####lm75_2 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH5}-$(printf "%04x" ${I2C_ADDR_LM75_2})" + if ! [ -L ${dev_path} ]; then + echo "lm75 ${I2C_ADDR_LM75_2}" > ${PATH_MUX_9548_0_CH5}/new_device #hwmon3 + sleep 0.1 + else + echo "${dev_path} already exist" + fi + ####lm86 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH5}-$(printf "%04x" ${I2C_ADDR_LM86})" + if ! [ -L ${dev_path} ]; then + echo "lm86 ${I2C_ADDR_LM86}" > ${PATH_MUX_9548_0_CH5}/new_device #hwmon4 + sleep 0.1 + else + echo "${dev_path} already exist" + fi + ####lm75_3 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH6}-$(printf "%04x" ${I2C_ADDR_LM75_3})" + if ! [ -L ${dev_path} ]; then + echo "lm75 ${I2C_ADDR_LM75_3}" > ${PATH_MUX_9548_0_CH6}/new_device # hwmon5 + sleep 0.1 + else + echo "${dev_path} already exist" + fi + ####lm75_4 + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_0_CH6}-$(printf "%04x" ${I2C_ADDR_LM75_4})" + if ! [ -L ${dev_path} ]; then + echo "lm75 ${I2C_ADDR_LM75_4}" > ${PATH_MUX_9548_0_CH6}/new_device #hwmon6 + sleep 0.1 + else + echo "${dev_path} already exist" + fi + ####BMC board thermal + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_MUX_9548_1_CH7}-$(printf "%04x" ${I2C_ADDR_TMP75_BB})" + if ! [ -L ${dev_path} ]; then + echo "tmp75 ${I2C_ADDR_TMP75_BB}" > ${PATH_MUX_9548_1_CH7}/new_device #hwmon7 + sleep 0.1 + else + echo "${dev_path} already exist" + fi + ####CPU board thermal + dev_path="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MAIN}-$(printf "%04x" ${I2C_ADDR_TMP75_CB})" + if ! [ -L ${dev_path} ]; then + echo "tmp75 ${I2C_ADDR_TMP75_CB}" > ${PATH_I801_DEVICE}/new_device #hwmon8 + sleep 0.1 + else + echo "${dev_path} already exist" + fi + + # probe jc42 kernel module + modprobe jc42 #hwmon9 + + echo "Done" +} + +#FAN Speed Init +function _i2c_fan_speed_init { + echo -n "FAN SPEED INIT..." + if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then + # init fan speed + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm2 + echo "SUCCESS" + else + echo "FAIL" + fi +} + +# HWM init +function _i2c_hwm_init { + echo "HWM INIT..." + # select bank0 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x80 + # SW reset, Disable monitor + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x01 0x9C + # disable TR5/TR6 DTS + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x04 0x0 + # enable FANIN1~8 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x06 0xFF + # disable FANIN9~14 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x07 0x00 + # CLKIN clock frequency set as 48Mhz + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x01 0x1C + # select bank 2 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x00 0x82 + # set PWM mode in FOMC + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x0F 0x00 + # set 25KHz fan output frequency in F1OPFP&F2OPFP + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x18 0x84 + _util_i2cset -y -r ${I2C_BUS_HWM} ${I2C_ADDR_W83795} 0x19 0x84 +} + +#IO Expander Init +function _i2c_io_exp_init { + echo "=========================================================" + echo "# Description: I2C IO Expender Init" + echo "=========================================================" + + # need to init BMC io expander first due to some io expander are reset default + echo "Init BMC INT & HW ID IO Expander" + # all input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_1} ${REG_PORT0_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_1} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_1} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_1} ${REG_PORT1_POL} 0x00 + + echo "Init BMC PSU status IO Expander" + # PWRON default 0 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT0_OUT} 0x00 + # default 0 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT1_OUT} 0x00 + # I/O 0.2 0.5 output(PWRON), rest input + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT0_DIR} 0xDB + # I/O 1.0~1.1 input, 1.2~1.4 output (1.5~1.7 not enable) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT1_DIR} 0xE3 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_2} ${REG_PORT1_POL} 0x00 + + echo "Init BMC RST and SEL IO Expander" + # RST default is 1 (ACTIVE_LOW) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT0_OUT} 0x3F + # SEL default is 0 (HOST), EN default is 1 (ACTIVE_HIGH) + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT1_OUT} 0x1F + # I/O 0.0~0.5 output, 0.6~0.7 not use + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT0_DIR} 0xD0 + # all output + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT1_DIR} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_MAIN} ${I2C_ADDR_MUX_9555_3} ${REG_PORT1_POL} 0x00 + + echo "Init System LED & HW ID IO Expander" + # I/O_0.x for System LED default 0, I/O_1.x for HW ID + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_OUT} 0x00 + # System LED => all output + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_DIR} 0x00 + # HW ID => all input + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT1_DIR} 0xFF + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${REG_PORT1_POL} 0x00 + + echo "Init FAN Board Status IO Expander" + # LED_G_H set to 1, LED_Y_G set to 0 (ACTIVE_HIGH) + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT0_OUT} 0x11 + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT1_OUT} 0x11 + # DIR/ABS is input, LED_Y/LED_G is output + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT0_DIR} 0xCC + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT1_DIR} 0xCC + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9555_0} ${REG_PORT1_POL} 0x00 + + echo "Init System SEL and RST IO Expander" + # default 0 (ACTIVE high) + # 0.4~0.5 SEL set to value 0 (host) + # 0.2 LED_CLR set to 0 will clear all switch LED bitmap, set to 1 here + _util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_OUT} 0x04 + # RST 1.6~1.7 default 1 (ACTIVE low), INT 1.0~1.4 default 1 (ACTIVE low) + _util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_OUT} 0xDF + # all output, but ISO_TF_CORE_RST_N 0.0 need to set as input to prevent reboot issue + _util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_DIR} 0x09 + # RST 1.6~1.7 output, rest are input + _util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_DIR} 0x3F + _util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_POL} 0x00 + _util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_POL} 0x00 + + echo "Init CPU CPLD IO Expander (FIXME)" + # all input + #echo "NUM_MUX_9546_1_CH3=${NUM_MUX_9546_1_CH3}, I2C_ADDR_MUX_9539_2=${I2C_ADDR_MUX_9539_2}" + #_util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_DIR} 0xFF + # all input + #_util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_DIR} 0xFF + #_util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT0_POL} 0x00 + #_util_i2cset -y -r ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_2} ${REG_PORT1_POL} 0x00 +} + +#Set FAN Tray LED +function _i2c_led_fan_tray_status_set { + echo "FAN Tray Status Setup" + #FAN Status get + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + + # check if io expander for fan tray exist + result=`i2cget -y ${I2C_BUS_FANTRAY_LED} ${I2C_ADDR_MUX_9555_0} ${REG_PORT0_IN} 2>/dev/null` + err_code=$? + if [ "$err_code" != "0" ]; then + echo "fan tray not exist!" + return + fi + + for FAN_TRAY in {1..4}; + do + FAN_ALARM="FAN${FAN_TRAY}_ALARM" + if [ "${!FAN_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="off" + _i2c_fan_tray_led + + echo "set [FAN TRAY ${FAN_TRAY}] [Green]=on [Amber]=off" + else + COLOR_LED="green" + ONOFF_LED="off" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_fan_tray_led + + echo "set [FAN TRAY ${FAN_TRAY}] [Green]=off [Amber]=on" + fi + done +} + +#Set FAN LED +function _i2c_led_fan_status_set { + echo "FAN Status Setup" + #PSU Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + + echo "led_fan setup..." + # all fan ok + if [ "${FAN1_ALARM}" == "0" ] \ + && [ "${FAN3_ALARM}" == "0" ] \ + && [ "${FAN5_ALARM}" == "0" ] \ + && [ "${FAN7_ALARM}" == "0" ]; then + COLOR_LED="green" + echo "${COLOR_LED}" + _i2c_fan_led + # all fan fail + elif [ "${FAN1_ALARM}" == "1" ] \ + && [ "${FAN3_ALARM}" == "1" ] \ + && [ "${FAN5_ALARM}" == "1" ] \ + && [ "${FAN7_ALARM}" == "1" ] ; then + COLOR_LED="amber" + echo "${COLOR_LED}" + _i2c_fan_led + # partial fan fail + else + COLOR_LED="amber" + echo "${COLOR_LED}" + _i2c_fan_led + fi + # if fan not present, no led need to be set +} + +#Set Power Supply LED +function _i2c_led_psu_status_set { + echo "PSU LED Status Setup" + + #PSU Status set + _i2c_psu_status + + #PSU1 Status + echo "led_psu1 setup..." + if [ "${psu1Exist}" == ${PSU_EXIST} ]; then + if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + echo "${COLOR_LED}" + _i2c_psu1_led + else + COLOR_LED="amber" + echo "${COLOR_LED}" + _i2c_psu1_led + fi + else + COLOR_LED="off" + echo "${COLOR_LED}" + _i2c_psu1_led + fi + + #PSU2 Status + echo "led_psu2 setup..." + if [ "${psu2Exist}" == ${PSU_EXIST} ]; then + if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + echo "${COLOR_LED}" + _i2c_psu2_led + else + COLOR_LED="amber" + echo "${COLOR_LED}" + _i2c_psu2_led + fi + else + COLOR_LED="off" + echo "${COLOR_LED}" + _i2c_psu2_led + fi +} + +#LED Test +function _i2c_led_test { + echo "=========================================================" + echo "# Description: I2C SYSTEM LED TEST..." + echo "=========================================================" + + #sys led (green) + COLOR_LED="green" + _i2c_sys_led + _pause 'Check SYS LED green light and Press [Enter] key to continue...' + #sys led (amber) + COLOR_LED="amber" + _i2c_sys_led + _pause 'Check SYS LED amber light and Press [Enter] key to continue...' + + #FAN led (green) + COLOR_LED="green" + _i2c_fan_led + _pause 'Check FAN LED green light and Press [Enter] key to continue...' + #FAN led (amber) + COLOR_LED="amber" + _i2c_fan_led + _pause 'Check FAN LED amber light and Press [Enter] key to continue...' + + #PSU1 led (green) + COLOR_LED="green" + _i2c_psu1_led + _pause 'Check PSU1 LED green light and Press [Enter] key to continue...' + #PSU1 led (amber) + COLOR_LED="amber" + _i2c_psu1_led + _pause 'Check PSU1 LED amber light and Press [Enter] key to continue...' + + #PSU2 led (green) + COLOR_LED="green" + _i2c_psu2_led + _pause 'Check PSU2 LED green light and Press [Enter] key to continue...' + #PSU2 led (amber) + COLOR_LED="amber" + _i2c_psu2_led + _pause 'Check PSU2 LED amber light and Press [Enter] key to continue...' + + #Turn OFF All LED (can't trun off system led) + COLOR_LED="off" + _i2c_sys_led + _i2c_fan_led + _i2c_psu1_led + _i2c_psu2_led + _pause 'Check turn off all LEDs (exclude SYS LED) and Press [Enter] key to continue...' + + # restore sys led + COLOR_LED="green" + _i2c_sys_led +} + +#Set QSFP Port cpld variable +function _qsfp_cpld_var_set { + local port=$1 + local reg_port_base + local reg_port_shift + + echo "_qsfp_cpld_var_set port=$port" + if [[ $1 -le 12 && $1 -ge 1 ]]; then + cpld_index=1 + reg_port_base=0 + elif [[ $1 -le 25 && $1 -ge 13 ]]; then + cpld_index=2 + reg_port_base=12 + elif [[ $1 -le 38 && $1 -ge 26 ]]; then + cpld_index=3 + reg_port_base=25 + elif [[ $1 -le 51 && $1 -ge 39 ]]; then + cpld_index=4 + reg_port_base=38 + elif [[ $1 -le 64 && $1 -ge 52 ]]; then + cpld_index=5 + reg_port_base=51 + else + echo "invalid port number" + fi + + cpld_port_index=$(( $port - $reg_port_base )) +} + +#Set QSFP Port eeporm variable +function _qsfp_eeprom_var_set { + local port=$1 + local eeprombusbase + local eeprombusshift + # port 1 => zqsfp0 + # port 2 => zqsfp1 + # ... + local port_group=$(( ($port - 1) / 8 )) + + case ${port_group} in + 0) + eeprombusbase=${NUM_MUX_9548_3_CH0} + ;; + 1) + eeprombusbase=${NUM_MUX_9548_4_CH0} + ;; + 2) + eeprombusbase=${NUM_MUX_9548_5_CH0} + ;; + 3) + eeprombusbase=${NUM_MUX_9548_6_CH0} + ;; + 4) + eeprombusbase=${NUM_MUX_9548_7_CH0} + ;; + 5) + eeprombusbase=${NUM_MUX_9548_8_CH0} + ;; + 6) + eeprombusbase=${NUM_MUX_9548_9_CH0} + ;; + 7) + eeprombusbase=${NUM_MUX_9548_10_CH0} + ;; + *) + ;; + esac + + eeprombusshift=$(( (${port} - 1) % 8)) + eepromBus=$(( ${eeprombusbase} + ${eeprombusshift} )) + eepromAddr=${I2C_ADDR_QSFP_EEPROM} +} + + +#Set SFP Port cpld variable +function _sfp_cpld_var_set { + local port=$1 + case ${port} in + 1) + cpld_index=1 + ;; + 2) + cpld_index=1 + ;; + *) + ;; + esac +} + +#Set QSFP Port eeporm variable +function _sfp_eeprom_var_set { + local port=$1 + + case ${port} in + 1) + eepromBus=${NUM_MUX_9546_1_CH0} + ;; + 2) + eepromBus=${NUM_MUX_9546_1_CH1} + ;; + *) + ;; + esac + + eepromAddr=${I2C_ADDR_SFP_EEPROM} +} + +#Get QSFP EEPROM Information +function _i2c_qsfp_eeprom_get { + local phy_port=0 + + # input parameter validation + _util_input_check ${QSFP_PORT} ${MIN_QSFP_PORT_NUM} ${MAX_QSFP_PORT_NUM} + + #get physical port + phy_port=$(_port_fp2phy $QSFP_PORT) + + _qsfp_eeprom_var_set ${phy_port} + + _util_get_qsfp_abs + + if [ $status = 0 ]; then + exit + fi + + # debug + echo "${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf '%04x' $eepromAddr)/eeprom | hexdump -C" + cat ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C +} + +#Init QSFP EEPROM +function _i2c_qsfp_eeprom_init { + echo "QSFP EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-64 ports EEPROM + local i + for i in {1..64}; + do + + #get physical port + phy_port=$(_port_fp2phy $i) + + _qsfp_eeprom_var_set ${phy_port} + + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then + echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + #echo "optoe1 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then + echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/delete_device + fi + done + echo "Done" +} + +#Get SFP EEPROM Information +function _i2c_sfp_eeprom_get { + + # input parameter validation + _util_input_check ${SFP_PORT} ${MIN_SFP_PORT_NUM} ${MAX_SFP_PORT_NUM} + _util_get_sfp_pres + + if [ $status = 0 ]; then + exit + fi + + _sfp_eeprom_var_set ${SFP_PORT} + + cat ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C +} + +#Init SFP EEPROM +function _i2c_sfp_eeprom_init { + echo "SFP EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-2 sfp+ EEPROM + local i + for i in {1..2}; + do + _sfp_eeprom_var_set ${i} + + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then + echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + #echo "optoe1 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr) ]; then + echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eepromBus/delete_device + fi + done + echo "Done" +} + +#Init Main Board EEPROM +function _i2c_mb_eeprom_init { + echo -n "Main Board EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init mb EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then + echo "mb_eeprom ${I2C_ADDR_MB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then + echo "$I2C_ADDR_MB_EEPROM" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/delete_device + fi + echo "Done" +} + +#Init CPU Board EEPROM +function _i2c_cb_eeprom_init { + echo -n "CPU Board EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init cpu EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM) ]; then + echo "mb_eeprom ${I2C_ADDR_CB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CB_EEPROM}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM) ]; then + echo "$I2C_ADDR_CB_EEPROM" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_CB_EEPROM}/delete_device + fi + echo "Done" +} + +#Init PSU Kernel Module +function _i2c_psu_init { + echo "=========================================================" + echo "# Description: I2C PSU Init" + echo "=========================================================" + modprobe ingrasys_s9280_64x_psu + + echo "psu1 ${I2C_ADDR_PSU1_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU1_EEPROM}/new_device + echo "psu2 ${I2C_ADDR_PSU2_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU2_EEPROM}/new_device +} + +#Deinit PSU Kernel Module +function _i2c_psu_deinit { + echo "${I2C_ADDR_PSU1_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU1_EEPROM}/delete_device + echo "${I2C_ADDR_PSU2_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU2_EEPROM}/delete_device + _util_rmmod ingrasys_s9280_64x_psu +} + +#get QSFP Status +function _i2c_qsfp_status_get { + + # input parameter validation + _util_input_check ${QSFP_PORT} ${MIN_QSFP_PORT_NUM} ${MAX_QSFP_PORT_NUM} + + local stat + _util_get_qsfp_abs + echo "status=$status" +} + +#get QSFP Type +function _i2c_qsfp_type_get { + local phy_port=0 + + phy_port=$(_port_fp2phy ${QSFP_PORT}) + + # input parameter validation + _util_input_check ${QSFP_PORT} ${MIN_QSFP_PORT_NUM} ${MAX_QSFP_PORT_NUM} + + _qsfp_eeprom_var_set ${phy_port} + + #Get QSFP EEPROM info + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom) + + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +function _i2c_sfp_status_get { + + # input parameter validation + _util_input_check ${SFP_PORT} ${MIN_SFP_PORT_NUM} ${MAX_SFP_PORT_NUM} + + local stat + _util_get_sfp_pres + #status: 0 -> Down, 1 -> Up + if [ $status = 0 ]; then + stat="down" + else + stat="up" + fi + echo "status is $stat" +} + +#get SFP Type +function _i2c_sfp_type_get { + + # input parameter validation + _util_input_check ${SFP_PORT} ${MIN_SFP_PORT_NUM} ${MAX_SFP_PORT_NUM} + + _sfp_eeprom_var_set ${SFP_PORT} + + #Get QSFP EEPROM info + sfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eepromBus-$(printf "%04x" $eepromAddr)/eeprom) + + identifier=$(echo $sfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $sfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $sfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +#Get PSU EEPROM Information +function _i2c_psu_eeprom_get { + local eeprom_psu1="" + local eeprom_psu2="" + + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Get..." + echo "=========================================================" + + eeprom_psu1="${PATH_SYSFS_PSU1}/psu_eeprom" + cat ${eeprom_psu1} | hexdump -C + + eeprom_psu2="${PATH_SYSFS_PSU2}/psu_eeprom" + cat ${eeprom_psu2} | hexdump -C +} + +#Get Main Board EEPROM Information +function _i2c_mb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get..." + echo "=========================================================" + _i2c_sys_eeprom_get mb +} + +#Get CPU Board EEPROM Information +function _i2c_cb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C CB EEPROM Get..." + echo "=========================================================" + _i2c_sys_eeprom_get cb +} + +#Get system EEPROM Information +##input: "cb" for cpu board, "mb" for main board +function _i2c_sys_eeprom_get { + local eeprom_dev + + if [ "$1" == "cb" ]; then + eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM)/eeprom" + elif [ "$1" == "mb" ]; then + eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM)/eeprom" + else + echo "wrong eeprom type" + return + fi + + # check if eeprom device exist in sysfs + if [ ! -f ${eeprom_dev} ]; then + echo "eeprom device not init" + return + fi + + cat ${eeprom_dev} | hexdump -C + echo "Done" +} + +#sync eeprom content between mb and cb eeprom +function _i2c_eeprom_sync { + echo "=========================================================" + echo "# Description: EEPROM sync..." + echo "=========================================================" + + local mb_eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM)/eeprom" + local cb_eeprom_dev="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_CB_EEPROM}-$(printf "%04x" $I2C_ADDR_CB_EEPROM)/eeprom" + + # check if eeprom device exist in sysfs + if [[ ! -f ${mb_eeprom_dev} || ! -f ${cb_eeprom_dev} ]]; then + echo "eeprom device not init" + return + fi + + ## check if MB eeprom is empty + if [ ! -z "$(cat ${mb_eeprom_dev} | hexdump -n2 | grep ffff)" ]; then + echo "copy cb eeprom to mb eeprom..." + cat ${cb_eeprom_dev} > ${mb_eeprom_dev} + else + echo "no need to sync" + fi + + echo "Done" +} + +#Set System Status LED +function _i2c_sys_led { + # only green/amber, on/off can't control + if [ "${COLOR_LED}" == "green" ]; then + # set sys_led_g (0.7) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x80 + value=0x80 + elif [ "${COLOR_LED}" == "amber" ]; then + # set sys_led_g (0.7) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x80 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set FAN LED +function _i2c_fan_led { + if [ "${COLOR_LED}" == "green" ]; then + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x40 + elif [ "${COLOR_LED}" == "amber" ]; then + # set fan_led_en (0.6) = 1 & fan_led_y (0.5) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x60 + elif [ "${COLOR_LED}" == "off" ]; then + # set fan_led_en (0.6) = 0 & fan_led_y (0.5) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x60 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set PSU1 LED +function _i2c_psu1_led { + if [ "${COLOR_LED}" == "green" ]; then + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + # set psu1_pwr_ok_oe (0.4) = 1 & psu1_led_y (0.3) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x18 + elif [ "${COLOR_LED}" == "off" ]; then + # set psu1_pwr_ok_oe (0.4) = 0 & psu1_led_y (0.3) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x18 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set PSU2 LED +function _i2c_psu2_led { + if [ "${COLOR_LED}" == "green" ]; then + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x04 + elif [ "${COLOR_LED}" == "amber" ]; then + # set psu0_pwr_ok_oe (0.2) = 1 & psu0_led_y (0.1) = 1 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x06 + elif [ "${COLOR_LED}" == "off" ]; then + # set psu0_pwr_ok_oe (0.2) = 0 & psu0_led_y (0.1) = 0 + output_reg=${REG_PORT0_OUT} + mask=0x06 + value=0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + #apply to io expander + _util_i2cset -m ${mask} -y ${I2C_BUS_SYS_LED} ${I2C_ADDR_MUX_9539_0} ${output_reg} ${value} + echo "Done" +} + +#Set FAN Tray LED +function _i2c_fan_tray_led { + + i2cAddr=${I2C_ADDR_MUX_9555_0} + output_reg=${REG_PORT0_OUT} + + case ${FAN_TRAY} in + 1) + output_reg=${REG_PORT0_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 2) + output_reg=${REG_PORT0_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + 3) + output_reg=${REG_PORT1_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 4) + output_reg=${REG_PORT1_OUT} + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + *) + echo "Please input 1~4" + exit + ;; + esac + + # LED PIN value is ACTIVE HIGH + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0xff + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0xff + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + _util_i2cset -m $mask -y -r ${I2C_BUS_FANTRAY_LED} $i2cAddr ${output_reg} 0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "Done" +} + +#Get Board Version and Type +function _i2c_board_type_get { + # read input port 1 value from io expander + input_reg=${REG_PORT1_IN} + boardType=`i2cget -y ${I2C_BUS_HW_ID} ${I2C_ADDR_MUX_9539_0} ${input_reg}` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "MAIN_BOARD BOARD_ID is 0x%02x, HW Rev 0x%02x, Build Rev 0x%02x\n" $boardId $boardHwRev $boardBuildRev +} + +#Get BMC Board Version and Type +function _i2c_bmc_board_type_get { + # read input port 1 value from io expander + input_reg=${REG_PORT1_IN} + boardType=`i2cget -y ${I2C_BUS_BMC_HW_ID} ${I2C_ADDR_MUX_9555_1} ${input_reg}` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "BMC_BOARD BOARD_ID is 0x%02x, HW Rev 0x%02x, Build Rev 0x%02x\n" $boardId $boardHwRev $boardBuildRev +} + +#Get CPLD Version +function _i2c_cpld_version { + echo "=========================================================" + echo "# Description: CPLD Version" + echo "=========================================================" + + for i in {1..5}; + do + local cpld_bus="I2C_BUS_CPLD${i}" + local cpld_path="PATH_CPLD${i}_DEVICE" + local file_path="${PATH_SYS_I2C_DEVICES}/${!cpld_bus}-$(printf "%04x" ${I2C_ADDR_CPLD})/cpld_version" + printf "[CPLD %d] %s\n" ${i} $(cat ${file_path}) + done +} + +#Get PSU Status +function _i2c_psu_status { + local psu_abs="" + + psu1PwGood=`cat ${PATH_SYSFS_PSU1}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU1}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu1Exist=1 + else + psu1Exist=0 + fi + + psu2PwGood=`cat ${PATH_SYSFS_PSU2}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU2}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu2Exist=1 + else + psu2Exist=0 + fi + + printf "PSU1 Exist:%x PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood + printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood +} + +#Get register value from CPLD +function _i2c_cpld_reg_read { + local idx=$1 + local file_name=$2 + local cpld_i2c_addr=${I2C_ADDR_CPLD} + local reg_file_path + + case ${idx} in + 1) + cpld_i2c_bus=${I2C_BUS_CPLD1} + ;; + 2) + cpld_i2c_bus=${I2C_BUS_CPLD2} + ;; + 3) + cpld_i2c_bus=${I2C_BUS_CPLD3} + ;; + 4) + cpld_i2c_bus=${I2C_BUS_CPLD4} + ;; + 5) + cpld_i2c_bus=${I2C_BUS_CPLD5} + ;; + *) + echo "invalid cpld index" + exit + ;; + esac + + reg_file_path="${PATH_SYS_I2C_DEVICES}/${cpld_i2c_bus}-$(printf "%04x" ${cpld_i2c_addr})/${file_name}" + cpld_reg_val=`cat ${reg_file_path}` + # TODO: debug + echo "cat ${reg_file_path} => ${cpld_reg_val}" +} + +#util functions +function _util_i2cset { + if [ "$DEBUG" == "on" ]; then + i2cset $@ + else + i2cset $@ 1>/dev/null + fi +} + +function _i2c_set { + local i2c_bus=$1 + local i2c_addr=$2 + local reg=$3 + local mask=$4 + local value=$5 + + echo `i2cset -m $mask -y -r ${i2c_bus} ${i2c_addr} ${reg} ${value}` +} + +function _util_rmmod { + local mod=$1 + [ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod +} + +# get qsfp presence +function _util_get_qsfp_abs { + local phy_port=0 + + #get physical port + phy_port=$(_port_fp2phy $QSFP_PORT) + + echo "fp port $QSFP_PORT => phy port $phy_port" + # read status from cpld + _qsfp_cpld_var_set ${phy_port} + cpld_reg_file_name="${CPLD_QSFP_STATUS_KEY}_${cpld_port_index}" + _i2c_cpld_reg_read ${cpld_index} ${cpld_reg_file_name} + #status: 0 -> Down, 1 -> Up (ACTIVE_LOW in ABS_BIT) + status=$(( $(( $((${cpld_reg_val})) & (1 << ($CPLD_QSFP_STATUS_ABS_BIT)) ))?0:1 )) +} + +# get sfp presence +function _util_get_sfp_pres { + local pres_bit + # read status from cpld + _sfp_cpld_var_set ${SFP_PORT} + cpld_reg_file_name="${CPLD_SFP_STATUS_KEY}" + _i2c_cpld_reg_read ${cpld_index} ${cpld_reg_file_name} + if [ "${SFP_PORT}" == "1" ]; then + pres_bit=${CPLD_SFP0_STATUS_PRES_BIT} + else + pres_bit=${CPLD_SFP1_STATUS_PRES_BIT} + fi + #status: 0 -> Down, 1 -> Up (ACTIVE_LOW in PRES_BIT) + status=$(( $(( $((${cpld_reg_val})) & (1 << ($pres_bit)) ))?0:1 )) +} + +# valid input number +function _util_input_check { + # input parameter validation + if [[ $1 -lt $2 || $1 -gt $3 ]]; then + echo "Please input number $2~$3" + exit + fi +} + +# clear all switch port led bitmap +function _util_port_led_clear { + echo "port led clear..." + # gpio pin on GPIO MUX PCA9539#1 I/O 0.2 + # pull low to reset bitamp + output_reg=${REG_PORT0_OUT} + mask=0x04 + value=0x00 + _util_i2cset -m ${mask} -y ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_1} ${output_reg} ${value} + sleep 1 + # pull high to out of reset + value=0xFF + _util_i2cset -m ${mask} -y ${NUM_MUX_9546_1_CH3} ${I2C_ADDR_MUX_9539_1} ${output_reg} ${value} + echo "Done" +} + +#Increase read socket buffer for CoPP Test +function _config_rmem { + echo "109430400" > /proc/sys/net/core/rmem_max +} + +#Main Function +function _main { + tart_time_str=`date` + start_time_sec=$(date +%s) + + if [ "${EXEC_FUNC}" == "help" ]; then + _help + elif [ "${EXEC_FUNC}" == "i2c_init" ]; then + _i2c_init + elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then + _i2c_deinit + elif [ "${EXEC_FUNC}" == "i2c_fan_speed_init" ]; then + _i2c_fan_speed_init + elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then + _i2c_io_exp_init + elif [ "${EXEC_FUNC}" == "i2c_led_test" ]; then + _i2c_led_test + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then + _i2c_mb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_cb_eeprom_get" ]; then + _i2c_cb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_eeprom_sync" ]; then + _i2c_eeprom_sync + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then + _i2c_psu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then + _i2c_qsfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_sfp_eeprom_get" ]; then + _i2c_sfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_init" ]; then + _i2c_qsfp_eeprom_init ${QSFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_sfp_eeprom_init" ]; then + _i2c_sfp_eeprom_init ${SFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_init" ]; then + _i2c_mb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_cb_eeprom_init" ]; then + _i2c_cb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then + _i2c_qsfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_sfp_status_get" ]; then + _i2c_sfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then + _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_sfp_type_get" ]; then + _i2c_sfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then + _i2c_led_psu_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then + _i2c_led_fan_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then + _i2c_led_fan_tray_status_set + elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then + _i2c_sys_led + elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then + _i2c_fan_led + elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then + _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then + _i2c_psu1_led + elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then + _i2c_psu2_led + elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then + _i2c_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_bmc_board_type_get" ]; then + _i2c_bmc_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_cpld_version" ]; then + _i2c_cpld_version + elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then + _i2c_init + _i2c_led_test + _i2c_psu_eeprom_get + _i2c_mb_eeprom_get + _i2c_cb_eeprom_get + _i2c_board_type_get + _i2c_bmc_board_type_get + _i2c_cpld_version + _i2c_psu_status + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + if [ "$DEBUG" == "on" ]; then + echo "-----------------------------------------------------" + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" + + echo "done!!!" + fi +} + +_main diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/qsfp_monitor.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/qsfp_monitor.sh new file mode 100755 index 000000000000..23a3fd066bee --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/qsfp_monitor.sh @@ -0,0 +1,105 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=3 +I2C_UTILS="/usr/sbin/i2c_utils.sh" +QSFP_SI_SCRIPT="/usr/sbin/qsfp_si_cfg.sh" +QSFP_ARRAY=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0) + +#QSFP SI monitor +function _qsfp_si_monitor { + local i + local status + for i in {0..63}; + do + status=`${I2C_UTILS} i2c_qsfp_status_get $(expr $i + 1) | egrep '^status=.*$' | sed -e 's/status=//g'` + if [ "${status}" == "1" ]; then + _qsfp_type_check $i + fi + done +} + +#QSFP type +function _qsfp_type_check { + local port=$1 + local qsfp_type=`${I2C_UTILS} i2c_qsfp_type_get $(expr $port + 1)` + local identifier=`echo "$qsfp_type" | grep '^identifier=.*$' | sed -e 's/identifier=//g'` + if [ "${identifier}" == "11" ]; then + connector=`echo "$qsfp_type" | grep '^connector=.*$' | sed -e 's/connector=//g'` + case ${connector} in + 21|23) + #DAC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to DAC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} dac $port >/dev/null + fi + ;; + *) + #Optical + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to Optical" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} optical $port >/dev/null + fi + ;; + esac + fi +} + +#Docker exist check +function _docker_swss_check { + while true + do + # Check if syncd starts + result=`docker exec -i swss bash -c "echo -en \"SELECT 1\\nHLEN HIDDEN\" | redis-cli | sed -n 2p"` #TBD FIX ME + if [ "$result" == "3" ]; then + return + fi + sleep $INTERVAL + done +} + +#Docker exist check +function _qsfp_si_cfg_script_check { + + if [ -f ${QSFP_SI_SCRIPT} ] && [ -x ${QSFP_SI_SCRIPT} ]; then + echo "SI Script exists. Start monitor." + return + else + echo "SI Script not exist. Exit monitor." + exit + fi +} + +# main function +function _main { + #Check SI Script + _qsfp_si_cfg_script_check + #Check docker swss is running + _docker_swss_check + while true + do + _qsfp_si_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main + diff --git a/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/s9280_64x_monitor.sh b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/s9280_64x_monitor.sh new file mode 100755 index 000000000000..eedf685b290b --- /dev/null +++ b/platform/barefoot/sonic-platform-modules-ingrasys/s9280-64x/utils/s9280_64x_monitor.sh @@ -0,0 +1,42 @@ +#!/bin/bash +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=5 +I2C_UTILS="/usr/sbin/i2c_utils.sh" + + +# TBD: LED status monitor +function _led_monitor { + ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_psu_status_set >/dev/null + ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null +} + +# main function +function _main { + while true + do + #PSU controlled by dummy board, + #but fan LED and fan tray LED must controlled by this service + _led_monitor + + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main From a215bcd8f1cdbfe27ad808817cce5c12a12e7d4b Mon Sep 17 00:00:00 2001 From: Kebo Liu Date: Fri, 3 Aug 2018 07:53:30 +0800 Subject: [PATCH 043/180] [mlnx-sfp-plugin] enhancement to support transceiver sensor monitoring (#1839) * [mlnx-sfpplugin] enhancement to support tranceiver sensor monitoring * Modify the eeprom folder to make it accessably from pmon container * implement the get_transceiver_change_event API file change list modified: device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py modified: device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py modified: device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py modified: device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py modified: device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py signed-off-by Liu Kebo kebol@mellanox.com * remove commented code * revise the get_transceiver_change_event implementation and remove unused function * remove blank --- .../plugins/sfputil.py | 43 ++++++++++++++++- .../x86_64-mlnx_msn2100-r0/plugins/sfputil.py | 43 ++++++++++++++++- .../x86_64-mlnx_msn2410-r0/plugins/sfputil.py | 48 +++++++++++++++++-- .../x86_64-mlnx_msn2700-r0/plugins/sfputil.py | 43 ++++++++++++++++- .../x86_64-mlnx_msn2740-r0/plugins/sfputil.py | 43 ++++++++++++++++- 5 files changed, 208 insertions(+), 12 deletions(-) diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py index 6aef1310d51f..2eb3d628ff9f 100644 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py +++ b/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py @@ -10,10 +10,13 @@ except ImportError as e: raise ImportError("%s - required module not found" % str(e)) +# parameters for DB connection +REDIS_HOSTNAME = "localhost" +REDIS_PORT = 6379 +REDIS_TIMEOUT_USECS = 0 class SfpUtil(SfpUtilBase): """Platform-specific SfpUtil class""" - PORT_START = 0 PORT_END = 31 PORTS_IN_BLOCK = 32 @@ -22,6 +25,12 @@ class SfpUtil(SfpUtilBase): _port_to_eeprom_mapping = {} + db_sel = None + db_sel_timeout = None + db_sel_object = None + db_sel_tbl = None + state_db = None + @property def port_start(self): return self.PORT_START @@ -39,7 +48,7 @@ def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping def __init__(self): - eeprom_path = "/bsp/qsfp/qsfp{0}" + eeprom_path = "/sys/class/i2c-adapter/i2c-2/2-0048/hwmon/hwmon7/qsfp{0}_eeprom" for x in range(0, self.port_end + 1): self._port_to_eeprom_mapping[x] = eeprom_path.format(x + self.EEPROM_OFFSET) @@ -149,3 +158,33 @@ def reset(self, port_num): return False return False + + def get_transceiver_change_event(self, timeout=0): + phy_port_dict = {} + status = True + + if self.db_sel == None: + from swsscommon import swsscommon + self.state_db = swsscommon.DBConnector(swsscommon.STATE_DB, + REDIS_HOSTNAME, + REDIS_PORT, + REDIS_TIMEOUT_USECS) + + # Subscribe to state table for SFP change notifications + self.db_sel = swsscommon.Select() + self.db_sel_tbl = swsscommon.NotificationConsumer(self.state_db, 'TRANSCEIVER_NOTIFY') + self.db_sel.addSelectable(self.db_sel_tbl) + self.db_sel_timeout = swsscommon.Select.TIMEOUT + self.db_sel_object = swsscommon.Select.OBJECT + + (state, c) = self.db_sel.select(timeout) + if state == self.db_sel_timeout: + status = True + elif state != self.db_sel_object: + status = False + else: + (key, op, fvp) = self.db_sel_tbl.pop() + phy_port_dict[key] = op + + return status, phy_port_dict + diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py index 4a7b063ac608..631a6b774fb3 100644 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py +++ b/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py @@ -10,10 +10,13 @@ except ImportError as e: raise ImportError("%s - required module not found" % str(e)) +# parameters for DB connection +REDIS_HOSTNAME = "localhost" +REDIS_PORT = 6379 +REDIS_TIMEOUT_USECS = 0 class SfpUtil(SfpUtilBase): """Platform-specific SfpUtil class""" - PORT_START = 0 PORT_END = 15 PORTS_IN_BLOCK = 16 @@ -22,6 +25,12 @@ class SfpUtil(SfpUtilBase): _port_to_eeprom_mapping = {} + db_sel = None + db_sel_timeout = None + db_sel_object = None + db_sel_tbl = None + state_db = None + @property def port_start(self): return self.PORT_START @@ -39,7 +48,7 @@ def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping def __init__(self): - eeprom_path = "/bsp/qsfp/qsfp{0}" + eeprom_path = "/sys/class/i2c-adapter/i2c-2/2-0048/hwmon/hwmon4/qsfp{0}_eeprom" for x in range(0, self.port_end + 1): self._port_to_eeprom_mapping[x] = eeprom_path.format(x + self.EEPROM_OFFSET) @@ -149,3 +158,33 @@ def reset(self, port_num): return False return False + + def get_transceiver_change_event(self, timeout=0): + phy_port_dict = {} + status = True + + if self.db_sel == None: + from swsscommon import swsscommon + self.state_db = swsscommon.DBConnector(swsscommon.STATE_DB, + REDIS_HOSTNAME, + REDIS_PORT, + REDIS_TIMEOUT_USECS) + + # Subscribe to state table for SFP change notifications + self.db_sel = swsscommon.Select() + self.db_sel_tbl = swsscommon.NotificationConsumer(self.state_db, 'TRANSCEIVER_NOTIFY') + self.db_sel.addSelectable(self.db_sel_tbl) + self.db_sel_timeout = swsscommon.Select.TIMEOUT + self.db_sel_object = swsscommon.Select.OBJECT + + (state, c) = self.db_sel.select(timeout) + if state == self.db_sel_timeout: + status = True + elif state != self.db_sel_object: + status = False + else: + (key, op, fvp) = self.db_sel_tbl.pop() + phy_port_dict[key] = op + + return status, phy_port_dict + diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py index d9699aca45a6..c379155b82e7 100644 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py +++ b/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py @@ -10,18 +10,27 @@ except ImportError as e: raise ImportError("%s - required module not found" % str(e)) +# parameters for DB connection +REDIS_HOSTNAME = "localhost" +REDIS_PORT = 6379 +REDIS_TIMEOUT_USECS = 0 class SfpUtil(SfpUtilBase): """Platform-specific SfpUtil class""" - PORT_START = 0 PORT_END = 55 PORTS_IN_BLOCK = 56 - + QSFP_PORT_START = 48 EEPROM_OFFSET = 1 _port_to_eeprom_mapping = {} + db_sel = None + db_sel_timeout = None + db_sel_object = None + db_sel_tbl = None + state_db = None + @property def port_start(self): return self.PORT_START @@ -32,20 +41,21 @@ def port_end(self): @property def qsfp_ports(self): - return range(0, self.PORTS_IN_BLOCK + 1) + return range(self.QSFP_PORT_START, self.PORTS_IN_BLOCK + 1) @property def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping def __init__(self): - eeprom_path = "/bsp/qsfp/qsfp{0}" + eeprom_path = "/sys/class/i2c-adapter/i2c-2/2-0048/hwmon/hwmon6/qsfp{0}_eeprom" for x in range(0, self.port_end + 1): self._port_to_eeprom_mapping[x] = eeprom_path.format(x + self.EEPROM_OFFSET) SfpUtilBase.__init__(self) + def get_presence(self, port_num): # Check for invalid port_num if port_num < self.port_start or port_num > self.port_end: @@ -149,3 +159,33 @@ def reset(self, port_num): return False return False + + def get_transceiver_change_event(self, timeout=0): + phy_port_dict = {} + status = True + + if self.db_sel == None: + from swsscommon import swsscommon + self.state_db = swsscommon.DBConnector(swsscommon.STATE_DB, + REDIS_HOSTNAME, + REDIS_PORT, + REDIS_TIMEOUT_USECS) + + # Subscribe to state table for SFP change notifications + self.db_sel = swsscommon.Select() + self.db_sel_tbl = swsscommon.NotificationConsumer(self.state_db, 'TRANSCEIVER_NOTIFY') + self.db_sel.addSelectable(self.db_sel_tbl) + self.db_sel_timeout = swsscommon.Select.TIMEOUT + self.db_sel_object = swsscommon.Select.OBJECT + + (state, c) = self.db_sel.select(timeout) + if state == self.db_sel_timeout: + status = True + elif state != self.db_sel_object: + status = False + else: + (key, op, fvp) = self.db_sel_tbl.pop() + phy_port_dict[key] = op + + return status, phy_port_dict + diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py index 6aef1310d51f..2eb3d628ff9f 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py @@ -10,10 +10,13 @@ except ImportError as e: raise ImportError("%s - required module not found" % str(e)) +# parameters for DB connection +REDIS_HOSTNAME = "localhost" +REDIS_PORT = 6379 +REDIS_TIMEOUT_USECS = 0 class SfpUtil(SfpUtilBase): """Platform-specific SfpUtil class""" - PORT_START = 0 PORT_END = 31 PORTS_IN_BLOCK = 32 @@ -22,6 +25,12 @@ class SfpUtil(SfpUtilBase): _port_to_eeprom_mapping = {} + db_sel = None + db_sel_timeout = None + db_sel_object = None + db_sel_tbl = None + state_db = None + @property def port_start(self): return self.PORT_START @@ -39,7 +48,7 @@ def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping def __init__(self): - eeprom_path = "/bsp/qsfp/qsfp{0}" + eeprom_path = "/sys/class/i2c-adapter/i2c-2/2-0048/hwmon/hwmon7/qsfp{0}_eeprom" for x in range(0, self.port_end + 1): self._port_to_eeprom_mapping[x] = eeprom_path.format(x + self.EEPROM_OFFSET) @@ -149,3 +158,33 @@ def reset(self, port_num): return False return False + + def get_transceiver_change_event(self, timeout=0): + phy_port_dict = {} + status = True + + if self.db_sel == None: + from swsscommon import swsscommon + self.state_db = swsscommon.DBConnector(swsscommon.STATE_DB, + REDIS_HOSTNAME, + REDIS_PORT, + REDIS_TIMEOUT_USECS) + + # Subscribe to state table for SFP change notifications + self.db_sel = swsscommon.Select() + self.db_sel_tbl = swsscommon.NotificationConsumer(self.state_db, 'TRANSCEIVER_NOTIFY') + self.db_sel.addSelectable(self.db_sel_tbl) + self.db_sel_timeout = swsscommon.Select.TIMEOUT + self.db_sel_object = swsscommon.Select.OBJECT + + (state, c) = self.db_sel.select(timeout) + if state == self.db_sel_timeout: + status = True + elif state != self.db_sel_object: + status = False + else: + (key, op, fvp) = self.db_sel_tbl.pop() + phy_port_dict[key] = op + + return status, phy_port_dict + diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py index 6aef1310d51f..d617135e3e89 100644 --- a/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py +++ b/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py @@ -10,10 +10,13 @@ except ImportError as e: raise ImportError("%s - required module not found" % str(e)) +# parameters for DB connection +REDIS_HOSTNAME = "localhost" +REDIS_PORT = 6379 +REDIS_TIMEOUT_USECS = 0 class SfpUtil(SfpUtilBase): """Platform-specific SfpUtil class""" - PORT_START = 0 PORT_END = 31 PORTS_IN_BLOCK = 32 @@ -22,6 +25,12 @@ class SfpUtil(SfpUtilBase): _port_to_eeprom_mapping = {} + db_sel = None + db_sel_timeout = None + db_sel_object = None + db_sel_tbl = None + state_db = None + @property def port_start(self): return self.PORT_START @@ -39,7 +48,7 @@ def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping def __init__(self): - eeprom_path = "/bsp/qsfp/qsfp{0}" + eeprom_path = "/sys/class/i2c-adapter/i2c-2/2-0048/hwmon/hwmon6/qsfp{0}_eeprom" for x in range(0, self.port_end + 1): self._port_to_eeprom_mapping[x] = eeprom_path.format(x + self.EEPROM_OFFSET) @@ -149,3 +158,33 @@ def reset(self, port_num): return False return False + + def get_transceiver_change_event(self, timeout=0): + phy_port_dict = {} + status = True + + if self.db_sel == None: + from swsscommon import swsscommon + self.state_db = swsscommon.DBConnector(swsscommon.STATE_DB, + REDIS_HOSTNAME, + REDIS_PORT, + REDIS_TIMEOUT_USECS) + + # Subscribe to state table for SFP change notifications + self.db_sel = swsscommon.Select() + self.db_sel_tbl = swsscommon.NotificationConsumer(self.state_db, 'TRANSCEIVER_NOTIFY') + self.db_sel.addSelectable(self.db_sel_tbl) + self.db_sel_timeout = swsscommon.Select.TIMEOUT + self.db_sel_object = swsscommon.Select.OBJECT + + (state, c) = self.db_sel.select(timeout) + if state == self.db_sel_timeout: + status = True + elif state != self.db_sel_object: + status = False + else: + (key, op, fvp) = self.db_sel_tbl.pop() + phy_port_dict[key] = op + + return status, phy_port_dict + From 38beca654c678dafe4399d208addf2b1a51a4c5d Mon Sep 17 00:00:00 2001 From: Kebo Liu Date: Sat, 4 Aug 2018 07:33:56 +0800 Subject: [PATCH 044/180] [docker-platform-monitor] make file and supervisord conf change for new xcvrd deamon (#1840) * [docker-platform-monitor] make file and supervisord conf change for new xcvrd deamon * make file change for the new daemon * supervisord conf change for the new daemon signed-off-by Liu Kebo kebol@mellanox.com * make xcvrd start sequence aligned with the supervisord conf * update submodules to include xcvrd modification --- dockers/docker-platform-monitor/start.sh | 2 ++ dockers/docker-platform-monitor/supervisord.conf | 9 +++++++++ rules/docker-platform-monitor.mk | 2 +- rules/sonic-xcvrd.mk | 5 +++++ src/sonic-platform-daemons | 2 +- 5 files changed, 18 insertions(+), 2 deletions(-) create mode 100644 rules/sonic-xcvrd.mk diff --git a/dockers/docker-platform-monitor/start.sh b/dockers/docker-platform-monitor/start.sh index b4023c16367a..30699694b6d2 100755 --- a/dockers/docker-platform-monitor/start.sh +++ b/dockers/docker-platform-monitor/start.sh @@ -26,3 +26,5 @@ if [ -e /usr/share/sonic/platform/fancontrol ]; then fi supervisorctl start ledd + +supervisorctl start xcvrd diff --git a/dockers/docker-platform-monitor/supervisord.conf b/dockers/docker-platform-monitor/supervisord.conf index 13790d70f614..aa947ce2c9ae 100644 --- a/dockers/docker-platform-monitor/supervisord.conf +++ b/dockers/docker-platform-monitor/supervisord.conf @@ -45,3 +45,12 @@ autorestart=false stdout_logfile=syslog stderr_logfile=syslog startsecs=0 + +[program:xcvrd] +command=/usr/bin/xcvrd +priority=6 +autostart=false +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog +startsecs=0 diff --git a/rules/docker-platform-monitor.mk b/rules/docker-platform-monitor.mk index 00b4d48687cd..d6404e18c47f 100644 --- a/rules/docker-platform-monitor.mk +++ b/rules/docker-platform-monitor.mk @@ -2,7 +2,7 @@ DOCKER_PLATFORM_MONITOR = docker-platform-monitor.gz $(DOCKER_PLATFORM_MONITOR)_PATH = $(DOCKERS_PATH)/docker-platform-monitor -$(DOCKER_PLATFORM_MONITOR)_DEPENDS += $(LIBSWSSCOMMON) $(PYTHON_SWSSCOMMON) $(SONIC_LEDD) +$(DOCKER_PLATFORM_MONITOR)_DEPENDS += $(LIBSWSSCOMMON) $(PYTHON_SWSSCOMMON) $(SONIC_LEDD) $(SONIC_XCVRD) $(DOCKER_PLATFORM_MONITOR)_PYTHON_WHEELS += $(SONIC_PLATFORM_COMMON_PY2) $(DOCKER_PLATFORM_MONITOR)_PYTHON_WHEELS += $(SWSSSDK_PY2) $(DOCKER_PLATFORM_MONITOR)_LOAD_DOCKERS = $(DOCKER_CONFIG_ENGINE) diff --git a/rules/sonic-xcvrd.mk b/rules/sonic-xcvrd.mk new file mode 100644 index 000000000000..b97f8dd11b79 --- /dev/null +++ b/rules/sonic-xcvrd.mk @@ -0,0 +1,5 @@ +# sonic-xcvrd (SONiC Transceiver monitoring daemon) Debian package + +SONIC_XCVRD = python-sonic-xcvrd_1.0-1_all.deb +$(SONIC_XCVRD)_SRC_PATH = $(SRC_PATH)/sonic-platform-daemons/sonic-xcvrd +SONIC_PYTHON_STDEB_DEBS += $(SONIC_XCVRD) diff --git a/src/sonic-platform-daemons b/src/sonic-platform-daemons index ce83d58b0aff..b1b9169bf4cf 160000 --- a/src/sonic-platform-daemons +++ b/src/sonic-platform-daemons @@ -1 +1 @@ -Subproject commit ce83d58b0afffaa3e0b9d57686c814a2b5fd771e +Subproject commit b1b9169bf4cf5b3d0e4778dc51c03b99b15c0c6b From c822b3c75d87ea9bc7ee6c9b42d82008a102198d Mon Sep 17 00:00:00 2001 From: zzhiyuan Date: Fri, 3 Aug 2018 16:34:27 -0700 Subject: [PATCH 045/180] Update arista driver submodule (#1900) Includes changes to enable interrupt handling. --- platform/barefoot/sonic-platform-modules-arista | 2 +- platform/broadcom/sonic-platform-modules-arista | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/platform/barefoot/sonic-platform-modules-arista b/platform/barefoot/sonic-platform-modules-arista index 98b983c32da2..8f65ad92c5b5 160000 --- a/platform/barefoot/sonic-platform-modules-arista +++ b/platform/barefoot/sonic-platform-modules-arista @@ -1 +1 @@ -Subproject commit 98b983c32da28eaf35f9991d6dc1f6aca00d9335 +Subproject commit 8f65ad92c5b5dfec24e8faf068cc9d2374244edf diff --git a/platform/broadcom/sonic-platform-modules-arista b/platform/broadcom/sonic-platform-modules-arista index 98b983c32da2..8f65ad92c5b5 160000 --- a/platform/broadcom/sonic-platform-modules-arista +++ b/platform/broadcom/sonic-platform-modules-arista @@ -1 +1 @@ -Subproject commit 98b983c32da28eaf35f9991d6dc1f6aca00d9335 +Subproject commit 8f65ad92c5b5dfec24e8faf068cc9d2374244edf From 75361042f53c1cbbdad01a2d12e36598cf1e8626 Mon Sep 17 00:00:00 2001 From: lguohan Date: Sat, 4 Aug 2018 21:19:29 -0700 Subject: [PATCH 046/180] [device]: add support for celestica E1031 (#1528) --- .../Celestica-E1031-T48S4/port_config.ini | 53 ++ .../Celestica-E1031-T48S4/sai.profile | 1 + .../x86_64-cel_e1031-r0/installer.conf | 3 + .../x86_64-cel_e1031-r0/minigraph.xml | 810 ++++++++++++++++++ platform/broadcom/sai.mk | 8 +- 5 files changed, 871 insertions(+), 4 deletions(-) create mode 100644 device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/port_config.ini create mode 100644 device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/sai.profile create mode 100644 device/celestica/x86_64-cel_e1031-r0/installer.conf create mode 100644 device/celestica/x86_64-cel_e1031-r0/minigraph.xml diff --git a/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/port_config.ini b/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/port_config.ini new file mode 100644 index 000000000000..6a7debfa45f6 --- /dev/null +++ b/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/port_config.ini @@ -0,0 +1,53 @@ +# name lanes speed alias autoneg +Ethernet0 2 1000 etp1 1 +Ethernet1 1 1000 etp2 1 +Ethernet2 4 1000 etp3 1 +Ethernet3 3 1000 etp4 1 +Ethernet4 6 1000 etp5 1 +Ethernet5 5 1000 etp6 1 +Ethernet6 8 1000 etp7 1 +Ethernet7 7 1000 etp8 1 +Ethernet8 10 1000 etp9 1 +Ethernet9 9 1000 etp10 1 +Ethernet10 12 1000 etp11 1 +Ethernet11 11 1000 etp12 1 +Ethernet12 14 1000 etp13 1 +Ethernet13 13 1000 etp14 1 +Ethernet14 16 1000 etp15 1 +Ethernet15 15 1000 etp16 1 +Ethernet16 18 1000 etp17 1 +Ethernet17 17 1000 etp18 1 +Ethernet18 20 1000 etp19 1 +Ethernet19 19 1000 etp20 1 +Ethernet20 22 1000 etp21 1 +Ethernet21 21 1000 etp22 1 +Ethernet22 24 1000 etp23 1 +Ethernet23 23 1000 etp24 1 +Ethernet24 26 1000 etp25 1 +Ethernet25 25 1000 etp26 1 +Ethernet26 28 1000 etp27 1 +Ethernet27 27 1000 etp28 1 +Ethernet28 30 1000 etp29 1 +Ethernet29 29 1000 etp30 1 +Ethernet30 32 1000 etp31 1 +Ethernet31 31 1000 etp32 1 +Ethernet32 34 1000 etp33 1 +Ethernet33 33 1000 etp34 1 +Ethernet34 36 1000 etp35 1 +Ethernet35 35 1000 etp36 1 +Ethernet36 38 1000 etp37 1 +Ethernet37 37 1000 etp38 1 +Ethernet38 40 1000 etp39 1 +Ethernet39 39 1000 etp40 1 +Ethernet40 42 1000 etp41 1 +Ethernet41 41 1000 etp42 1 +Ethernet42 44 1000 etp43 1 +Ethernet43 43 1000 etp44 1 +Ethernet44 46 1000 etp45 1 +Ethernet45 45 1000 etp46 1 +Ethernet46 48 1000 etp47 1 +Ethernet47 47 1000 etp48 1 +Ethernet48 54 10000 etp49 0 +Ethernet49 53 10000 etp50 0 +Ethernet50 56 10000 etp51 0 +Ethernet51 55 10000 etp52 0 diff --git a/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/sai.profile b/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/sai.profile new file mode 100644 index 000000000000..1f36f82fd515 --- /dev/null +++ b/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/sai.profile @@ -0,0 +1 @@ +SAI_INIT_CONFIG_FILE=/etc/bcm/helix4-e1031-48x1G+4x10G.config.bcm diff --git a/device/celestica/x86_64-cel_e1031-r0/installer.conf b/device/celestica/x86_64-cel_e1031-r0/installer.conf new file mode 100644 index 000000000000..9b49af780817 --- /dev/null +++ b/device/celestica/x86_64-cel_e1031-r0/installer.conf @@ -0,0 +1,3 @@ +CONSOLE_PORT=0x2f8 +CONSOLE_DEV=1 +CONSOLE_SPEED=9600 diff --git a/device/celestica/x86_64-cel_e1031-r0/minigraph.xml b/device/celestica/x86_64-cel_e1031-r0/minigraph.xml new file mode 100644 index 000000000000..7b24807718ac --- /dev/null +++ b/device/celestica/x86_64-cel_e1031-r0/minigraph.xml @@ -0,0 +1,810 @@ + + + + + + ARISTA01T1 + 10.0.0.1 + sonic + 10.0.0.0 + 1 + 180 + 60 + + + ARISTA02T1 + 10.0.0.5 + sonic + 10.0.0.4 + 1 + 180 + 60 + + + ARISTA03T1 + 10.0.0.9 + sonic + 10.0.0.8 + 1 + 180 + 60 + + + ARISTA04T1 + 10.0.0.13 + sonic + 10.0.0.12 + 1 + 180 + 60 + + + ARISTA01T1 + FC00::2 + sonic + FC00::1 + 1 + 180 + 60 + + + ARISTA02T1 + FC00::A + sonic + FC00::9 + 1 + 180 + 60 + + + ARISTA03T1 + FC00::12 + sonic + FC00::11 + 1 + 180 + 60 + + + ARISTA04T1 + FC00::1A + sonic + FC00::19 + 1 + 180 + 60 + + + + + 64601 + sonic + + + BGPPeer +
10.0.0.1
+ + + + + + BGPPeer +
10.0.0.5
+ + + + + + BGPPeer +
10.0.0.9
+ + + + + + BGPPeer +
10.0.0.13
+ + + + + + BGPPeer +
FC00::2
+ + + + + + BGPPeer +
FC00::A
+ + + + + + BGPPeer +
FC00::12
+ + + + + + BGPPeer +
FC00::1A
+ + + + + + + + + 64802 + ARISTA01T1 + + + + 64802 + ARISTA02T1 + + + + 64802 + ARISTA03T1 + + + + 64802 + ARISTA04T1 + + + + + + + + + + HostIP + Loopback0 + + 10.1.0.32/32 + + 10.1.0.32/32 + + + HostIP1 + Loopback0 + + FC00:1::32/128 + + FC00:1::32/128 + + + + + HostIP + eth0 + + 10.251.0.243/23 + + 10.251.0.243/23 + + + + + + sonic + + + + VlanInterface + Vlan2 + etp1;etp2;etp3;etp4;etp5;etp6;etp7;etp8;etp9;etp10;etp11;etp12;etp13;etp14;etp15;etp16;etp17;etp18;etp19;etp20;etp21;etp22;etp23;etp24;etp25;etp26;etp27;etp28;etp29;etp30;etp31;etp32;etp33;etp34;etp35;etp36;etp37;etp38;etp39;etp40;etp41;etp42;etp43;etp44;etp45;etp46;etp47;etp48 + False + 0.0.0.0/0 + + 2 + 2 + 172.0.0.0/26 + + + + + IPInterface + + etp49 + 10.0.0.0/31 + + + IPInterface + + etp50 + 10.0.0.4/31 + + + IPInterface + + etp51 + 10.0.0.8/31 + + + IPInterface + + etp52 + 10.0.0.12/31 + + + IPInterface + + etp49 + FC00::1/126 + + + IPInterface + + etp50 + FC00::9/126 + + + IPInterface + + etp51 + FC00::11/126 + + + IPInterface + + etp52 + FC00::19/126 + + + IPInterface + + Vlan2 + 172.0.0.1/26 + + + + + + + + + + + + DeviceInterfaceLink + true + 10000 + ARISTA01T1 + Ethernet1 + true + sonic + etp49 + + + DeviceInterfaceLink + true + 10000 + ARISTA02T1 + Ethernet1 + true + sonic + etp50 + + + DeviceInterfaceLink + true + 10000 + ARISTA03T1 + Ethernet1 + true + sonic + etp51 + + + DeviceInterfaceLink + true + 10000 + ARISTA04T1 + Ethernet1 + true + sonic + etp52 + + + DeviceInterfaceLink + true + 1000 + sonic + etp1 + true + server-01 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp2 + true + server-02 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp3 + true + server-03 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp4 + true + server-04 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp5 + true + server-05 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp6 + true + server-06 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp7 + true + server-07 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp8 + true + server-08 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp9 + true + server-09 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp10 + true + server-10 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp11 + true + server-11 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp12 + true + server-12 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp13 + true + server-13 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp14 + true + server-14 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp15 + true + server-15 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp16 + true + server-16 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp17 + true + server-17 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp18 + true + server-18 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp19 + true + server-19 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp20 + true + server-20 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp21 + true + server-21 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp22 + true + server-22 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp23 + true + server-23 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp24 + true + server-24 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp25 + true + server-25 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp26 + true + server-26 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp27 + true + server-27 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp28 + true + server-28 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp29 + true + server-29 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp30 + true + server-30 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp31 + true + server-31 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp32 + true + server-32 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp33 + true + server-33 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp34 + true + server-34 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp35 + true + server-35 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp36 + true + server-36 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp37 + true + server-37 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp38 + true + server-38 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp39 + true + server-39 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp40 + true + server-40 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp41 + true + server-41 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp42 + true + server-42 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp43 + true + server-43 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp44 + true + server-44 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp45 + true + server-45 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp46 + true + server-46 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp47 + true + server-47 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + etp48 + true + server-48 + 0 + + + + + sonic + Celestica-E1031-T48S4 + + 10.251.0.243 + + + + + sonic + Celestica-E1031-T48S4 + diff --git a/platform/broadcom/sai.mk b/platform/broadcom/sai.mk index 611592c98182..77171281d8e3 100644 --- a/platform/broadcom/sai.mk +++ b/platform/broadcom/sai.mk @@ -1,9 +1,9 @@ -BRCM_SAI = libsaibcm_3.1.3.5-3_amd64.deb -$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm_3.1.3.5-3_amd64.deb?sv=2015-04-05&sr=b&sig=lzB9IHpJuMEENr9N9W0LBFamJ7mpvRVWgigfQmpIrPc%3D&se=2155-06-05T09%3A13%3A41Z&sp=r" +BRCM_SAI = libsaibcm_3.1.3.5-5_amd64.deb +$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/bcmsai/libsaibcm_3.1.3.5-5_amd64.deb?sv=2015-04-05&sr=b&sig=QPeazVTcPxPiWnLQRX4BqAAoyo0kTXJlfNAAtp2nilk%3D&se=2155-06-28T00%3A35%3A53Z&sp=r" -BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5-3_amd64.deb +BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5-5_amd64.deb $(eval $(call add_derived_package,$(BRCM_SAI),$(BRCM_SAI_DEV))) -$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/libsaibcm-dev_3.1.3.5-3_amd64.deb?sv=2015-04-05&sr=b&sig=WoRAz6j8G3Xk%2BT3MOmhp5f%2BvWggw%2BgGgk2JtDJHkKjs%3D&se=2155-06-05T09%3A14%3A46Z&sp=r" +$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/bcmsai/libsaibcm-dev_3.1.3.5-5_amd64.deb?sv=2015-04-05&sr=b&sig=6yrT5BVHkTr5955Rf9sADlVVN8o8TzxSjoj3JZg6nHw%3D&se=2155-06-28T00%3A37%3A34Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_SAI) $(BRCM_SAI_DEV) $(BRCM_SAI_DEV)_DEPENDS += $(BRCM_SAI) From 1a55ae2b3a801ac438d914cf4dfbb58ee67487f9 Mon Sep 17 00:00:00 2001 From: Kebo Liu Date: Mon, 6 Aug 2018 14:06:56 +0800 Subject: [PATCH 047/180] update sonic-platform-common submodule for xcvrd support (#1901) --- src/sonic-platform-common | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-platform-common b/src/sonic-platform-common index 76ae431e41dc..d98600e8ed8d 160000 --- a/src/sonic-platform-common +++ b/src/sonic-platform-common @@ -1 +1 @@ -Subproject commit 76ae431e41dca1255f8056b590668c9ca187f031 +Subproject commit d98600e8ed8df0280cb07487132e20adc48d7f6e From 33b713e7eff544777d8b2d453ed0a571a1e15e48 Mon Sep 17 00:00:00 2001 From: Mykola F <37578614+mykolaf@users.noreply.github.com> Date: Tue, 7 Aug 2018 07:36:54 +0300 Subject: [PATCH 048/180] [submodule] update snmpagent and dbsyncd, extending/implementing ieee802.1ab, rfc3433, rfc2737 MIBs (#1902) --- src/sonic-dbsyncd | 2 +- src/sonic-snmpagent | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/sonic-dbsyncd b/src/sonic-dbsyncd index 94f2700f67f8..eeb678cb44a3 160000 --- a/src/sonic-dbsyncd +++ b/src/sonic-dbsyncd @@ -1 +1 @@ -Subproject commit 94f2700f67f87b431c7ce45e4b9d7788707c6732 +Subproject commit eeb678cb44a37c15bd3250dc64d932c3ea33ac26 diff --git a/src/sonic-snmpagent b/src/sonic-snmpagent index bf1b165458e4..ae99de071b33 160000 --- a/src/sonic-snmpagent +++ b/src/sonic-snmpagent @@ -1 +1 @@ -Subproject commit bf1b165458e4e19286d245a3398921057f4df21c +Subproject commit ae99de071b332882aa3ac1e163188af93f602231 From 3d137654be6597f9214f4426a75bc9836e7e2ade Mon Sep 17 00:00:00 2001 From: Taoyu Li Date: Tue, 7 Aug 2018 08:43:08 -0700 Subject: [PATCH 049/180] [minigraph.py] add support to parse deployment id of neighbor devices (#1890) * [minigraph.py] add support to parse deployment id of neighbor devices * Add unitest * Fix function name --- src/sonic-config-engine/minigraph.py | 11 ++++-- .../tests/simple-sample-graph-case.xml | 36 +++++++++++-------- .../tests/test_minigraph_case.py | 5 +++ 3 files changed, 34 insertions(+), 18 deletions(-) diff --git a/src/sonic-config-engine/minigraph.py b/src/sonic-config-engine/minigraph.py index a8140408e97f..1ad76b0b37d9 100644 --- a/src/sonic-config-engine/minigraph.py +++ b/src/sonic-config-engine/minigraph.py @@ -41,6 +41,7 @@ def parse_device(device): d_type = None # don't shadow type() hwsku = None name = None + deployment_id = None if str(QName(ns3, "type")) in device.attrib: d_type = device.attrib[str(QName(ns3, "type"))] @@ -53,7 +54,9 @@ def parse_device(device): name = node.text elif node.tag == str(QName(ns, "HwSku")): hwsku = node.text - return (lo_prefix, mgmt_prefix, name, hwsku, d_type) + elif node.tag == str(QName(ns, "DeploymentId")): + deployment_id = node.text + return (lo_prefix, mgmt_prefix, name, hwsku, d_type, deployment_id) def parse_png(png, hname): neighbors = {} @@ -92,8 +95,10 @@ def parse_png(png, hname): if child.tag == str(QName(ns, "Devices")): for device in child.findall(str(QName(ns, "Device"))): - (lo_prefix, mgmt_prefix, name, hwsku, d_type) = parse_device(device) + (lo_prefix, mgmt_prefix, name, hwsku, d_type, deployment_id) = parse_device(device) device_data = {'lo_addr': lo_prefix, 'type': d_type, 'mgmt_addr': mgmt_prefix, 'hwsku': hwsku } + if deployment_id: + device_data['deployment_id'] = deployment_id devices[name] = device_data if child.tag == str(QName(ns, "DeviceInterfaceLinks")): @@ -546,7 +551,7 @@ def parse_xml(filename, platform=None, port_config_file=None): def parse_device_desc_xml(filename): root = ET.parse(filename).getroot() - (lo_prefix, mgmt_prefix, hostname, hwsku, d_type) = parse_device(root) + (lo_prefix, mgmt_prefix, hostname, hwsku, d_type, _) = parse_device(root) results = {} results['DEVICE_METADATA'] = {'localhost': { diff --git a/src/sonic-config-engine/tests/simple-sample-graph-case.xml b/src/sonic-config-engine/tests/simple-sample-graph-case.xml index 2d2f08f4d0d2..722d50f5ecd6 100644 --- a/src/sonic-config-engine/tests/simple-sample-graph-case.xml +++ b/src/sonic-config-engine/tests/simple-sample-graph-case.xml @@ -181,27 +181,33 @@ - + + + DeviceInterfaceLink + true + 10000 + switch-t0 + fortyGigE0/0 + switch-01t1 + port1 + + switch-t0 Force10-S6000 - ARISTA01T1 - Arista - - - ARISTA02T1 - Arista - - - ARISTA03T1 - Arista - - - ARISTA04T1 - Arista + switch-01t1 +
+ 10.1.0.186/32 +
+ 2 + + + 10.7.0.196/26 + + Force10-S6000 diff --git a/src/sonic-config-engine/tests/test_minigraph_case.py b/src/sonic-config-engine/tests/test_minigraph_case.py index 754bdae799f4..4ceccb32a686 100644 --- a/src/sonic-config-engine/tests/test_minigraph_case.py +++ b/src/sonic-config-engine/tests/test_minigraph_case.py @@ -94,6 +94,11 @@ def test_minigraph_deployment_id(self): output = self.run_script(argument) self.assertEqual(output.strip(), "1") + def test_minigraph_neighbor_metadata(self): + argument = '-m "' + self.sample_graph + '" -p "' + self.port_config + '" -v "DEVICE_NEIGHBOR_METADATA"' + output = self.run_script(argument) + self.assertEqual(output.strip(), "{'switch-01t1': {'lo_addr': '10.1.0.186/32', 'mgmt_addr': '10.7.0.196/26', 'hwsku': 'Force10-S6000', 'type': 'LeafRouter', 'deployment_id': '2'}}") + def test_metadata_everflow(self): argument = '-m "' + self.sample_graph + '" -p "' + self.port_config + '" -v "MIRROR_SESSION"' output = self.run_script(argument) From 634814b15230ee79b492525c0688f06193a100fc Mon Sep 17 00:00:00 2001 From: simonJi2018 <37395146+simonJi2018@users.noreply.github.com> Date: Wed, 8 Aug 2018 00:01:47 +0800 Subject: [PATCH 050/180] change buffer template and fix some device driver bug (#1903) * Upgrade SAI to v1.2.4 * Add a new supported device accton as7116 * Add maintainer info for deb * Add mk file for accton 7116 * fix some bug for sai 1.2.4 * fix git commit error for sdk and sai * change sai and sdk deb name * add config file for qos support * initial commit * Delete qos.json * Delete buffers.json.j2 * Delete qos.json * Delete buffers.json.j2 * Delete buffers.json.j2 * Delete qos.json * add support for sai 1.3.0 * add qos and buffer file for device and add sensor driver for 7116 * change buffer template --- .../Accton-AS7116-54X/buffers.json.j2 | 2 + .../Accton-AS7116-54X/buffers_defaults_t0.j2 | 72 ++ .../Accton-AS7116-54X/buffers_defaults_t1.j2 | 72 ++ .../Accton-AS7116-54X/pg_profile_lookup.ini | 17 + .../Accton-AS7116-54X/port_config.ini | 15 +- .../Accton-AS7116-54X/port_config.nps | 358 ++++++ .../Accton-AS7116-54X/port_config.nps.AOC.R0B | 358 ++++++ .../Accton-AS7116-54X/port_config.nps.DAC.R0B | 357 ++++++ .../Accton-AS7116-54X/port_config_as7116.ini | 55 - .../Accton-AS7116-54X/qos.json.j2 | 289 +++-- .../Accton-AS7116-54X/sai.profile | 4 +- .../installer.conf | 1 + .../led_proc_init.nps | 20 +- .../x86_64-accton_as7116_54x-r0/minigraph.xml | 1008 +---------------- .../plugins/psuutil.py | 92 ++ .../plugins/sfputil.py | 7 +- .../x86_64-accton_as7116_54x-r0/sensors.conf | 13 + .../INGRASYS-S9130-32X/buffers.json.j2 | 2 + .../INGRASYS-S9130-32X/buffers_defaults_t0.j2 | 69 ++ .../INGRASYS-S9130-32X/buffers_defaults_t1.j2 | 69 ++ .../INGRASYS-S9130-32X/pg_profile_lookup.ini | 17 + .../INGRASYS-S9130-32X/port_config.nps.3T2AOC | 318 ++++++ .../INGRASYS-S9130-32X/port_config.nps.3T2DAC | 318 ++++++ .../INGRASYS-S9130-32X/qos.json.j2 | 289 +++-- .../minigraph.xml | 86 +- .../INGRASYS-S9230-64X/buffers.json.j2 | 2 + .../INGRASYS-S9230-64X/buffers_defaults_t0.j2 | 69 ++ .../INGRASYS-S9230-64X/buffers_defaults_t1.j2 | 69 ++ .../INGRASYS-S9230-64X/pg_profile_lookup.ini | 17 + .../INGRASYS-S9230-64X/qos.json.j2 | 289 +++-- .../minigraph.xml | 86 +- .../modules/x86-64-accton-as7116-54x-fan.c | 52 +- .../as7116-54x/utils/accton_as7116_util.py | 10 +- 33 files changed, 2779 insertions(+), 1723 deletions(-) create mode 100644 device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers.json.j2 create mode 100644 device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers_defaults_t0.j2 create mode 100644 device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers_defaults_t1.j2 create mode 100644 device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/pg_profile_lookup.ini create mode 100644 device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps create mode 100644 device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps.AOC.R0B create mode 100644 device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps.DAC.R0B delete mode 100644 device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config_as7116.ini create mode 100644 device/accton/x86_64-accton_as7116_54x-r0/plugins/psuutil.py create mode 100644 device/accton/x86_64-accton_as7116_54x-r0/sensors.conf create mode 100644 device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers.json.j2 create mode 100644 device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers_defaults_t0.j2 create mode 100644 device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers_defaults_t1.j2 create mode 100644 device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/pg_profile_lookup.ini create mode 100644 device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/port_config.nps.3T2AOC create mode 100644 device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/port_config.nps.3T2DAC create mode 100644 device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers.json.j2 create mode 100644 device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers_defaults_t0.j2 create mode 100644 device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers_defaults_t1.j2 create mode 100644 device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/pg_profile_lookup.ini diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers.json.j2 b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers.json.j2 new file mode 100644 index 000000000000..9354b7ec5b59 --- /dev/null +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers.json.j2 @@ -0,0 +1,2 @@ +{%- set default_topo = 't0' %} +{%- include 'buffers_config.j2' %} \ No newline at end of file diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers_defaults_t0.j2 b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers_defaults_t0.j2 new file mode 100644 index 000000000000..7e7c32676eb7 --- /dev/null +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers_defaults_t0.j2 @@ -0,0 +1,72 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '20971328' %} +{% set ingress_lossy_pool_size = '20971328' %} +{% set egress_lossless_pool_size = '20971328' %} +{% set egress_lossy_pool_size = '20971328' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0, 48) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} + {%- endfor %} + {%- for port_idx in range(48, 54) %} + {%- if PORT_ALL.append("Ethernet%d" % (48 + (port_idx-48) * 4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "xon":"78400", + "xoff":"132160", + "size":"3584", + "static_th":"82880" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"3584", + "dynamic_th":"-1" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"3584", + "dynamic_th":"-4" + } + }, +{%- endmacro %} + +{# the typo of generate_pg_profils dued to buffers_config.j2 #} +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + } +{%- endmacro %} + +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + } +{%- endmacro %} \ No newline at end of file diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers_defaults_t1.j2 b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers_defaults_t1.j2 new file mode 100644 index 000000000000..7e7c32676eb7 --- /dev/null +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/buffers_defaults_t1.j2 @@ -0,0 +1,72 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '20971328' %} +{% set ingress_lossy_pool_size = '20971328' %} +{% set egress_lossless_pool_size = '20971328' %} +{% set egress_lossy_pool_size = '20971328' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0, 48) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} + {%- endfor %} + {%- for port_idx in range(48, 54) %} + {%- if PORT_ALL.append("Ethernet%d" % (48 + (port_idx-48) * 4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "xon":"78400", + "xoff":"132160", + "size":"3584", + "static_th":"82880" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"3584", + "dynamic_th":"-1" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"3584", + "dynamic_th":"-4" + } + }, +{%- endmacro %} + +{# the typo of generate_pg_profils dued to buffers_config.j2 #} +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + } +{%- endmacro %} + +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + } +{%- endmacro %} \ No newline at end of file diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/pg_profile_lookup.ini b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/pg_profile_lookup.ini new file mode 100644 index 000000000000..d98b0eca6d19 --- /dev/null +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/pg_profile_lookup.ini @@ -0,0 +1,17 @@ +# PG lossless profiles. +# speed cable size xon xoff threshold + 10000 5m 3584 32256 59136 36736 + 25000 5m 3584 41216 68096 45696 + 40000 5m 3584 47488 74368 51968 + 50000 5m 3584 52864 79744 57344 + 100000 5m 3584 78400 132160 82880 + 10000 40m 3584 32256 59136 36736 + 25000 40m 3584 41216 68096 45696 + 40000 40m 3584 47488 74368 51968 + 50000 40m 3584 52864 79744 57344 + 100000 40m 3584 78400 132160 82880 + 10000 300m 3584 32256 65856 36736 + 25000 300m 3584 41216 84672 45696 + 40000 300m 3584 47488 101024 51968 + 50000 300m 3584 52864 113120 57344 + 100000 300m 3584 78400 198688 82880 \ No newline at end of file diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.ini b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.ini index 6e5276fc726b..32125b076537 100644 --- a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.ini +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.ini @@ -47,12 +47,9 @@ Ethernet44 76 Ethernet45/1 44 Ethernet45 77 Ethernet46/1 45 Ethernet46 78 Ethernet47/1 46 Ethernet47 79 Ethernet48/1 47 -Ethernet48 80 Ethernet49/1 48 -Ethernet49 81 Ethernet50/1 49 -Ethernet50 82 Ethernet51/1 50 -Ethernet51 83 Ethernet52/1 51 -Ethernet52 84,85,86,87 Ethernet53/1 52 -Ethernet53 104,105,106,107 Ethernet54/1 53 -Ethernet54 108,109,110,111 Ethernet55/1 54 -Ethernet55 112,113,114,115 Ethernet56/1 55 -Ethernet56 116,117,118,119 Ethernet57/1 56 +Ethernet48 84,85,86,87 Ethernet49/1 48 +Ethernet52 80,81,82,83 Ethernet50/1 49 +Ethernet56 104,105,106,107 Ethernet51/1 50 +Ethernet60 108,109,110,111 Ethernet52/1 51 +Ethernet64 112,113,114,115 Ethernet53/1 52 +Ethernet68 116,117,118,119 Ethernet54/1 53 \ No newline at end of file diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps new file mode 100644 index 000000000000..34e5a2daab80 --- /dev/null +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps @@ -0,0 +1,358 @@ +init start stage unit=0 low-level +init set port-map unit=0 port=0 eth-macro=2 lane=0 max-speed=25g active=true +init set port-map unit=0 port=1 eth-macro=2 lane=1 max-speed=25g active=true +init set port-map unit=0 port=2 eth-macro=2 lane=2 max-speed=25g active=true +init set port-map unit=0 port=3 eth-macro=2 lane=3 max-speed=25g active=true +init set port-map unit=0 port=4 eth-macro=3 lane=0 max-speed=25g active=true +init set port-map unit=0 port=5 eth-macro=3 lane=1 max-speed=25g active=true +init set port-map unit=0 port=6 eth-macro=3 lane=2 max-speed=25g active=true +init set port-map unit=0 port=7 eth-macro=3 lane=3 max-speed=25g active=true +init set port-map unit=0 port=8 eth-macro=4 lane=0 max-speed=25g active=true +init set port-map unit=0 port=9 eth-macro=4 lane=1 max-speed=25g active=true +init set port-map unit=0 port=10 eth-macro=4 lane=2 max-speed=25g active=true +init set port-map unit=0 port=11 eth-macro=4 lane=3 max-speed=25g active=true +init set port-map unit=0 port=12 eth-macro=5 lane=0 max-speed=25g active=true +init set port-map unit=0 port=13 eth-macro=5 lane=1 max-speed=25g active=true +init set port-map unit=0 port=14 eth-macro=5 lane=2 max-speed=25g active=true +init set port-map unit=0 port=15 eth-macro=5 lane=3 max-speed=25g active=true +init set port-map unit=0 port=16 eth-macro=8 lane=0 max-speed=25g active=true +init set port-map unit=0 port=17 eth-macro=8 lane=1 max-speed=25g active=true +init set port-map unit=0 port=18 eth-macro=8 lane=2 max-speed=25g active=true +init set port-map unit=0 port=19 eth-macro=8 lane=3 max-speed=25g active=true +init set port-map unit=0 port=20 eth-macro=10 lane=0 max-speed=25g active=true +init set port-map unit=0 port=21 eth-macro=10 lane=1 max-speed=25g active=true +init set port-map unit=0 port=22 eth-macro=10 lane=2 max-speed=25g active=true +init set port-map unit=0 port=23 eth-macro=10 lane=3 max-speed=25g active=true +init set port-map unit=0 port=24 eth-macro=12 lane=0 max-speed=25g active=true +init set port-map unit=0 port=25 eth-macro=12 lane=1 max-speed=25g active=true +init set port-map unit=0 port=26 eth-macro=12 lane=2 max-speed=25g active=true +init set port-map unit=0 port=27 eth-macro=12 lane=3 max-speed=25g active=true +init set port-map unit=0 port=28 eth-macro=14 lane=0 max-speed=25g active=true +init set port-map unit=0 port=29 eth-macro=14 lane=1 max-speed=25g active=true +init set port-map unit=0 port=30 eth-macro=14 lane=2 max-speed=25g active=true +init set port-map unit=0 port=31 eth-macro=14 lane=3 max-speed=25g active=true +init set port-map unit=0 port=32 eth-macro=16 lane=0 max-speed=25g active=true +init set port-map unit=0 port=33 eth-macro=16 lane=1 max-speed=25g active=true +init set port-map unit=0 port=34 eth-macro=16 lane=2 max-speed=25g active=true +init set port-map unit=0 port=35 eth-macro=16 lane=3 max-speed=25g active=true +init set port-map unit=0 port=36 eth-macro=17 lane=0 max-speed=25g active=true +init set port-map unit=0 port=37 eth-macro=17 lane=1 max-speed=25g active=true +init set port-map unit=0 port=38 eth-macro=17 lane=2 max-speed=25g active=true +init set port-map unit=0 port=39 eth-macro=17 lane=3 max-speed=25g active=true +init set port-map unit=0 port=40 eth-macro=18 lane=0 max-speed=25g active=true +init set port-map unit=0 port=41 eth-macro=18 lane=1 max-speed=25g active=true +init set port-map unit=0 port=42 eth-macro=18 lane=2 max-speed=25g active=true +init set port-map unit=0 port=43 eth-macro=18 lane=3 max-speed=25g active=true +init set port-map unit=0 port=44 eth-macro=19 lane=0 max-speed=25g active=true +init set port-map unit=0 port=45 eth-macro=19 lane=1 max-speed=25g active=true +init set port-map unit=0 port=46 eth-macro=19 lane=2 max-speed=25g active=true +init set port-map unit=0 port=47 eth-macro=19 lane=3 max-speed=25g active=true +init set port-map unit=0 port=48 eth-macro=21 lane=0 max-speed=100g active=true +init set port-map unit=0 port=49 eth-macro=20 lane=0 max-speed=100g active=true +init set port-map unit=0 port=50 eth-macro=26 lane=0 max-speed=100g active=true +init set port-map unit=0 port=51 eth-macro=27 lane=0 max-speed=100g active=true +init set port-map unit=0 port=52 eth-macro=28 lane=0 max-speed=100g active=true +init set port-map unit=0 port=53 eth-macro=29 lane=0 max-speed=100g active=true +init set port-map unit=0 port=129 eth-macro=0 lane=1 max-speed=10g active=true guarantee=true cpi=true +init set port-map unit=0 port=130 eth-macro=0 lane=0 max-speed=10g active=true guarantee=true cpi=true init-done=true +init start stage unit=0 task-rsrc +init start stage unit=0 module +init start stage unit=0 task +phy set lane-swap portlist=0 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=1 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=2 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=3 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=4 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=5 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=6 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=7 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=8 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=9 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=10 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=11 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=12 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=13 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=14 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=15 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=16 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=17 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=18 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=19 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=20 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=21 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=22 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=23 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=24 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=25 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=26 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=27 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=28 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=29 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=30 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=31 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=32 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=33 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=34 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=35 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=36 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=37 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=38 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=39 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=40 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=41 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=42 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=43 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=44 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=45 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=46 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=47 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=48 lane-cnt=4 property=tx data=0x1.3.0.2 +phy set lane-swap portlist=49 lane-cnt=4 property=tx data=0x0.3.1.2 +phy set lane-swap portlist=50 lane-cnt=4 property=tx data=0x1.3.0.2 +phy set lane-swap portlist=51 lane-cnt=4 property=tx data=0x2.0.3.1 +phy set lane-swap portlist=52 lane-cnt=4 property=tx data=0x3.2.1.0 +phy set lane-swap portlist=53 lane-cnt=4 property=tx data=0x3.2.1.0 +phy set lane-swap portlist=0 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=1 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=2 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=3 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=4 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=5 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=6 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=7 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=8 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=9 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=10 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=11 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=12 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=13 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=14 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=15 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=16 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=17 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=18 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=19 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=20 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=21 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=22 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=23 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=24 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=25 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=26 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=27 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=28 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=29 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=30 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=31 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=32 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=33 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=34 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=35 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=36 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=37 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=38 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=39 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=40 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=41 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=42 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=43 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=44 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=45 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=46 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=47 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=48 lane-cnt=4 property=rx data=0x2.1.0.3 +phy set lane-swap portlist=49 lane-cnt=4 property=rx data=0x0.1.3.2 +phy set lane-swap portlist=50 lane-cnt=4 property=rx data=0x3.1.0.2 +phy set lane-swap portlist=51 lane-cnt=4 property=rx data=0x1.3.0.2 +phy set lane-swap portlist=52 lane-cnt=4 property=rx data=0x3.2.1.0 +phy set lane-swap portlist=53 lane-cnt=4 property=rx data=0x3.2.1.0 +phy set polarity-rev portlist=0 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=1 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=2 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=3 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=4 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=5 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=6 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=7 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=8 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=9 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=10 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=11 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=12 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=13 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=14 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=15 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=16 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=17 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=18 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=19 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=20 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=21 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=22 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=23 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=24 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=25 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=26 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=27 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=28 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=29 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=30 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=31 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=32 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=33 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=34 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=35 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=36 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=37 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=38 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=39 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=40 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=41 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=42 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=43 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=44 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=45 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=46 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=47 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=48 lane-cnt=4 property=tx data=0x0.0.0.1 +phy set polarity-rev portlist=49 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev portlist=50 lane-cnt=4 property=tx data=0x1.1.0.0 +phy set polarity-rev portlist=51 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev portlist=52 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev portlist=53 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev portlist=0 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=1 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=2 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=3 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=4 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=5 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=6 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=7 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=8 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=9 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=10 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=11 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=12 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=13 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=14 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=15 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=16 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=17 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=18 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=19 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=20 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=21 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=22 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=23 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=24 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=25 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=26 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=27 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=28 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=29 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=30 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=31 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=32 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=33 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=34 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=35 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=36 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=37 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=38 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=39 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=40 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=41 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=42 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=43 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=44 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=45 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=46 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=47 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=48 lane-cnt=4 property=rx data=0x0.1.0.1 +phy set polarity-rev portlist=49 lane-cnt=4 property=rx data=0x1.0.1.0 +phy set polarity-rev portlist=50 lane-cnt=4 property=rx data=0x0.0.1.0 +phy set polarity-rev portlist=51 lane-cnt=4 property=rx data=0x0.0.0.1 +phy set polarity-rev portlist=52 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev portlist=53 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set pre-emphasis portlist=0 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=0 lane-cnt=4 property=cn1 data=0x1.1.1.1 +phy set pre-emphasis portlist=0 lane-cnt=4 property=c0 data=0x1a.1a.1a.1a +phy set pre-emphasis portlist=0 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=4 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=4 lane-cnt=4 property=cn1 data=0x1.1.1.1 +phy set pre-emphasis portlist=4 lane-cnt=4 property=c0 data=0x1a.1a.1a.1a +phy set pre-emphasis portlist=4 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=8 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=8 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=8 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=8 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=12 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=12 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=12 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=12 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=16 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=16 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=16 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=16 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=20 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=20 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=20 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=20 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=24 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=24 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=24 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=24 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=28 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=28 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=28 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=28 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=32 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=32 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=32 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=32 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=36 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=36 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=36 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=36 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=40 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=40 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=40 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=40 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=44 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=44 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=44 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=44 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=48 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=48 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=48 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=48 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=49 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=49 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=49 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=49 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=50 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=50 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=50 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=50 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=51 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=51 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=51 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=51 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=52 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=52 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=52 lane-cnt=4 property=c0 data=0x1a.1a.1a.1a +phy set pre-emphasis portlist=52 lane-cnt=4 property=c1 data=0x8.8.8.8 +phy set pre-emphasis portlist=53 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=53 lane-cnt=4 property=cn1 data=0x1.1.1.1 +phy set pre-emphasis portlist=53 lane-cnt=4 property=c0 data=0x1a.1a.1a.1a +phy set pre-emphasis portlist=53 lane-cnt=4 property=c1 data=0x7.7.7.7 +port set property portlist=0-47 speed=25g +port set property portlist=48-53 speed=100g +port set property portlist=129-130 speed=10g +port set property portlist=0-47 medium-type=sr +port set property portlist=48-53 medium-type=sr4 +port set property portlist=129-130 medium-type=kr +port set adver portlist=129-130 speed-10g-kr +port set property portlist=129-130 an=enable +port set property portlist=0-53,129-130 admin=enable + diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps.AOC.R0B b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps.AOC.R0B new file mode 100644 index 000000000000..34e5a2daab80 --- /dev/null +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps.AOC.R0B @@ -0,0 +1,358 @@ +init start stage unit=0 low-level +init set port-map unit=0 port=0 eth-macro=2 lane=0 max-speed=25g active=true +init set port-map unit=0 port=1 eth-macro=2 lane=1 max-speed=25g active=true +init set port-map unit=0 port=2 eth-macro=2 lane=2 max-speed=25g active=true +init set port-map unit=0 port=3 eth-macro=2 lane=3 max-speed=25g active=true +init set port-map unit=0 port=4 eth-macro=3 lane=0 max-speed=25g active=true +init set port-map unit=0 port=5 eth-macro=3 lane=1 max-speed=25g active=true +init set port-map unit=0 port=6 eth-macro=3 lane=2 max-speed=25g active=true +init set port-map unit=0 port=7 eth-macro=3 lane=3 max-speed=25g active=true +init set port-map unit=0 port=8 eth-macro=4 lane=0 max-speed=25g active=true +init set port-map unit=0 port=9 eth-macro=4 lane=1 max-speed=25g active=true +init set port-map unit=0 port=10 eth-macro=4 lane=2 max-speed=25g active=true +init set port-map unit=0 port=11 eth-macro=4 lane=3 max-speed=25g active=true +init set port-map unit=0 port=12 eth-macro=5 lane=0 max-speed=25g active=true +init set port-map unit=0 port=13 eth-macro=5 lane=1 max-speed=25g active=true +init set port-map unit=0 port=14 eth-macro=5 lane=2 max-speed=25g active=true +init set port-map unit=0 port=15 eth-macro=5 lane=3 max-speed=25g active=true +init set port-map unit=0 port=16 eth-macro=8 lane=0 max-speed=25g active=true +init set port-map unit=0 port=17 eth-macro=8 lane=1 max-speed=25g active=true +init set port-map unit=0 port=18 eth-macro=8 lane=2 max-speed=25g active=true +init set port-map unit=0 port=19 eth-macro=8 lane=3 max-speed=25g active=true +init set port-map unit=0 port=20 eth-macro=10 lane=0 max-speed=25g active=true +init set port-map unit=0 port=21 eth-macro=10 lane=1 max-speed=25g active=true +init set port-map unit=0 port=22 eth-macro=10 lane=2 max-speed=25g active=true +init set port-map unit=0 port=23 eth-macro=10 lane=3 max-speed=25g active=true +init set port-map unit=0 port=24 eth-macro=12 lane=0 max-speed=25g active=true +init set port-map unit=0 port=25 eth-macro=12 lane=1 max-speed=25g active=true +init set port-map unit=0 port=26 eth-macro=12 lane=2 max-speed=25g active=true +init set port-map unit=0 port=27 eth-macro=12 lane=3 max-speed=25g active=true +init set port-map unit=0 port=28 eth-macro=14 lane=0 max-speed=25g active=true +init set port-map unit=0 port=29 eth-macro=14 lane=1 max-speed=25g active=true +init set port-map unit=0 port=30 eth-macro=14 lane=2 max-speed=25g active=true +init set port-map unit=0 port=31 eth-macro=14 lane=3 max-speed=25g active=true +init set port-map unit=0 port=32 eth-macro=16 lane=0 max-speed=25g active=true +init set port-map unit=0 port=33 eth-macro=16 lane=1 max-speed=25g active=true +init set port-map unit=0 port=34 eth-macro=16 lane=2 max-speed=25g active=true +init set port-map unit=0 port=35 eth-macro=16 lane=3 max-speed=25g active=true +init set port-map unit=0 port=36 eth-macro=17 lane=0 max-speed=25g active=true +init set port-map unit=0 port=37 eth-macro=17 lane=1 max-speed=25g active=true +init set port-map unit=0 port=38 eth-macro=17 lane=2 max-speed=25g active=true +init set port-map unit=0 port=39 eth-macro=17 lane=3 max-speed=25g active=true +init set port-map unit=0 port=40 eth-macro=18 lane=0 max-speed=25g active=true +init set port-map unit=0 port=41 eth-macro=18 lane=1 max-speed=25g active=true +init set port-map unit=0 port=42 eth-macro=18 lane=2 max-speed=25g active=true +init set port-map unit=0 port=43 eth-macro=18 lane=3 max-speed=25g active=true +init set port-map unit=0 port=44 eth-macro=19 lane=0 max-speed=25g active=true +init set port-map unit=0 port=45 eth-macro=19 lane=1 max-speed=25g active=true +init set port-map unit=0 port=46 eth-macro=19 lane=2 max-speed=25g active=true +init set port-map unit=0 port=47 eth-macro=19 lane=3 max-speed=25g active=true +init set port-map unit=0 port=48 eth-macro=21 lane=0 max-speed=100g active=true +init set port-map unit=0 port=49 eth-macro=20 lane=0 max-speed=100g active=true +init set port-map unit=0 port=50 eth-macro=26 lane=0 max-speed=100g active=true +init set port-map unit=0 port=51 eth-macro=27 lane=0 max-speed=100g active=true +init set port-map unit=0 port=52 eth-macro=28 lane=0 max-speed=100g active=true +init set port-map unit=0 port=53 eth-macro=29 lane=0 max-speed=100g active=true +init set port-map unit=0 port=129 eth-macro=0 lane=1 max-speed=10g active=true guarantee=true cpi=true +init set port-map unit=0 port=130 eth-macro=0 lane=0 max-speed=10g active=true guarantee=true cpi=true init-done=true +init start stage unit=0 task-rsrc +init start stage unit=0 module +init start stage unit=0 task +phy set lane-swap portlist=0 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=1 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=2 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=3 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=4 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=5 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=6 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=7 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=8 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=9 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=10 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=11 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=12 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=13 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=14 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=15 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=16 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=17 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=18 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=19 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=20 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=21 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=22 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=23 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=24 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=25 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=26 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=27 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=28 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=29 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=30 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=31 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=32 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=33 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=34 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=35 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=36 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=37 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=38 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=39 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=40 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=41 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=42 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=43 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=44 lane-cnt=1 property=tx data=0x0 +phy set lane-swap portlist=45 lane-cnt=1 property=tx data=0x1 +phy set lane-swap portlist=46 lane-cnt=1 property=tx data=0x2 +phy set lane-swap portlist=47 lane-cnt=1 property=tx data=0x3 +phy set lane-swap portlist=48 lane-cnt=4 property=tx data=0x1.3.0.2 +phy set lane-swap portlist=49 lane-cnt=4 property=tx data=0x0.3.1.2 +phy set lane-swap portlist=50 lane-cnt=4 property=tx data=0x1.3.0.2 +phy set lane-swap portlist=51 lane-cnt=4 property=tx data=0x2.0.3.1 +phy set lane-swap portlist=52 lane-cnt=4 property=tx data=0x3.2.1.0 +phy set lane-swap portlist=53 lane-cnt=4 property=tx data=0x3.2.1.0 +phy set lane-swap portlist=0 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=1 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=2 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=3 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=4 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=5 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=6 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=7 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=8 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=9 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=10 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=11 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=12 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=13 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=14 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=15 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=16 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=17 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=18 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=19 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=20 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=21 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=22 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=23 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=24 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=25 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=26 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=27 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=28 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=29 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=30 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=31 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=32 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=33 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=34 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=35 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=36 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=37 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=38 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=39 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=40 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=41 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=42 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=43 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=44 lane-cnt=1 property=rx data=0x1 +phy set lane-swap portlist=45 lane-cnt=1 property=rx data=0x2 +phy set lane-swap portlist=46 lane-cnt=1 property=rx data=0x3 +phy set lane-swap portlist=47 lane-cnt=1 property=rx data=0x0 +phy set lane-swap portlist=48 lane-cnt=4 property=rx data=0x2.1.0.3 +phy set lane-swap portlist=49 lane-cnt=4 property=rx data=0x0.1.3.2 +phy set lane-swap portlist=50 lane-cnt=4 property=rx data=0x3.1.0.2 +phy set lane-swap portlist=51 lane-cnt=4 property=rx data=0x1.3.0.2 +phy set lane-swap portlist=52 lane-cnt=4 property=rx data=0x3.2.1.0 +phy set lane-swap portlist=53 lane-cnt=4 property=rx data=0x3.2.1.0 +phy set polarity-rev portlist=0 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=1 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=2 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=3 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=4 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=5 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=6 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=7 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=8 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=9 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=10 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=11 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=12 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=13 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=14 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=15 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=16 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=17 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=18 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=19 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=20 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=21 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=22 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=23 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=24 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=25 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=26 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=27 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=28 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=29 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=30 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=31 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=32 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=33 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=34 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=35 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=36 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=37 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=38 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=39 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=40 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=41 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=42 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=43 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=44 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=45 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=46 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=47 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev portlist=48 lane-cnt=4 property=tx data=0x0.0.0.1 +phy set polarity-rev portlist=49 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev portlist=50 lane-cnt=4 property=tx data=0x1.1.0.0 +phy set polarity-rev portlist=51 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev portlist=52 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev portlist=53 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev portlist=0 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=1 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=2 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=3 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=4 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=5 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=6 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=7 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=8 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=9 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=10 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=11 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=12 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=13 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=14 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=15 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=16 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=17 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=18 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=19 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=20 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=21 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=22 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=23 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=24 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=25 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=26 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=27 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=28 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=29 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=30 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=31 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=32 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=33 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=34 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=35 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=36 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=37 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=38 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=39 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=40 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=41 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=42 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=43 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=44 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=45 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=46 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=47 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev portlist=48 lane-cnt=4 property=rx data=0x0.1.0.1 +phy set polarity-rev portlist=49 lane-cnt=4 property=rx data=0x1.0.1.0 +phy set polarity-rev portlist=50 lane-cnt=4 property=rx data=0x0.0.1.0 +phy set polarity-rev portlist=51 lane-cnt=4 property=rx data=0x0.0.0.1 +phy set polarity-rev portlist=52 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev portlist=53 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set pre-emphasis portlist=0 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=0 lane-cnt=4 property=cn1 data=0x1.1.1.1 +phy set pre-emphasis portlist=0 lane-cnt=4 property=c0 data=0x1a.1a.1a.1a +phy set pre-emphasis portlist=0 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=4 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=4 lane-cnt=4 property=cn1 data=0x1.1.1.1 +phy set pre-emphasis portlist=4 lane-cnt=4 property=c0 data=0x1a.1a.1a.1a +phy set pre-emphasis portlist=4 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=8 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=8 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=8 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=8 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=12 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=12 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=12 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=12 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=16 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=16 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=16 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=16 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=20 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=20 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=20 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=20 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=24 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=24 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=24 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=24 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=28 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=28 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=28 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=28 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=32 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=32 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=32 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=32 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=36 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=36 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=36 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=36 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=40 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=40 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=40 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=40 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=44 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=44 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=44 lane-cnt=4 property=c0 data=0x1c.1c.1c.1c +phy set pre-emphasis portlist=44 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=48 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=48 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=48 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=48 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=49 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=49 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=49 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=49 lane-cnt=4 property=c1 data=0x6.6.6.6 +phy set pre-emphasis portlist=50 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=50 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=50 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=50 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=51 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=51 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=51 lane-cnt=4 property=c0 data=0x1b.1b.1b.1b +phy set pre-emphasis portlist=51 lane-cnt=4 property=c1 data=0x7.7.7.7 +phy set pre-emphasis portlist=52 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=52 lane-cnt=4 property=cn1 data=0x0.0.0.0 +phy set pre-emphasis portlist=52 lane-cnt=4 property=c0 data=0x1a.1a.1a.1a +phy set pre-emphasis portlist=52 lane-cnt=4 property=c1 data=0x8.8.8.8 +phy set pre-emphasis portlist=53 lane-cnt=4 property=c2 data=0x2.2.2.2 +phy set pre-emphasis portlist=53 lane-cnt=4 property=cn1 data=0x1.1.1.1 +phy set pre-emphasis portlist=53 lane-cnt=4 property=c0 data=0x1a.1a.1a.1a +phy set pre-emphasis portlist=53 lane-cnt=4 property=c1 data=0x7.7.7.7 +port set property portlist=0-47 speed=25g +port set property portlist=48-53 speed=100g +port set property portlist=129-130 speed=10g +port set property portlist=0-47 medium-type=sr +port set property portlist=48-53 medium-type=sr4 +port set property portlist=129-130 medium-type=kr +port set adver portlist=129-130 speed-10g-kr +port set property portlist=129-130 an=enable +port set property portlist=0-53,129-130 admin=enable + diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps.DAC.R0B b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps.DAC.R0B new file mode 100644 index 000000000000..af9927ae2884 --- /dev/null +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config.nps.DAC.R0B @@ -0,0 +1,357 @@ +init start stage unit=0 low-level +init set port-map unit=0 port=0 eth-macro=2 lane=0 max-speed=25g active=true +init set port-map unit=0 port=1 eth-macro=2 lane=1 max-speed=25g active=true +init set port-map unit=0 port=2 eth-macro=2 lane=2 max-speed=25g active=true +init set port-map unit=0 port=3 eth-macro=2 lane=3 max-speed=25g active=true +init set port-map unit=0 port=4 eth-macro=3 lane=0 max-speed=25g active=true +init set port-map unit=0 port=5 eth-macro=3 lane=1 max-speed=25g active=true +init set port-map unit=0 port=6 eth-macro=3 lane=2 max-speed=25g active=true +init set port-map unit=0 port=7 eth-macro=3 lane=3 max-speed=25g active=true +init set port-map unit=0 port=8 eth-macro=4 lane=0 max-speed=25g active=true +init set port-map unit=0 port=9 eth-macro=4 lane=1 max-speed=25g active=true +init set port-map unit=0 port=10 eth-macro=4 lane=2 max-speed=25g active=true +init set port-map unit=0 port=11 eth-macro=4 lane=3 max-speed=25g active=true +init set port-map unit=0 port=12 eth-macro=5 lane=0 max-speed=25g active=true +init set port-map unit=0 port=13 eth-macro=5 lane=1 max-speed=25g active=true +init set port-map unit=0 port=14 eth-macro=5 lane=2 max-speed=25g active=true +init set port-map unit=0 port=15 eth-macro=5 lane=3 max-speed=25g active=true +init set port-map unit=0 port=16 eth-macro=8 lane=0 max-speed=25g active=true +init set port-map unit=0 port=17 eth-macro=8 lane=1 max-speed=25g active=true +init set port-map unit=0 port=18 eth-macro=8 lane=2 max-speed=25g active=true +init set port-map unit=0 port=19 eth-macro=8 lane=3 max-speed=25g active=true +init set port-map unit=0 port=20 eth-macro=10 lane=0 max-speed=25g active=true +init set port-map unit=0 port=21 eth-macro=10 lane=1 max-speed=25g active=true +init set port-map unit=0 port=22 eth-macro=10 lane=2 max-speed=25g active=true +init set port-map unit=0 port=23 eth-macro=10 lane=3 max-speed=25g active=true +init set port-map unit=0 port=24 eth-macro=12 lane=0 max-speed=25g active=true +init set port-map unit=0 port=25 eth-macro=12 lane=1 max-speed=25g active=true +init set port-map unit=0 port=26 eth-macro=12 lane=2 max-speed=25g active=true +init set port-map unit=0 port=27 eth-macro=12 lane=3 max-speed=25g active=true +init set port-map unit=0 port=28 eth-macro=14 lane=0 max-speed=25g active=true +init set port-map unit=0 port=29 eth-macro=14 lane=1 max-speed=25g active=true +init set port-map unit=0 port=30 eth-macro=14 lane=2 max-speed=25g active=true +init set port-map unit=0 port=31 eth-macro=14 lane=3 max-speed=25g active=true +init set port-map unit=0 port=32 eth-macro=16 lane=0 max-speed=25g active=true +init set port-map unit=0 port=33 eth-macro=16 lane=1 max-speed=25g active=true +init set port-map unit=0 port=34 eth-macro=16 lane=2 max-speed=25g active=true +init set port-map unit=0 port=35 eth-macro=16 lane=3 max-speed=25g active=true +init set port-map unit=0 port=36 eth-macro=17 lane=0 max-speed=25g active=true +init set port-map unit=0 port=37 eth-macro=17 lane=1 max-speed=25g active=true +init set port-map unit=0 port=38 eth-macro=17 lane=2 max-speed=25g active=true +init set port-map unit=0 port=39 eth-macro=17 lane=3 max-speed=25g active=true +init set port-map unit=0 port=40 eth-macro=18 lane=0 max-speed=25g active=true +init set port-map unit=0 port=41 eth-macro=18 lane=1 max-speed=25g active=true +init set port-map unit=0 port=42 eth-macro=18 lane=2 max-speed=25g active=true +init set port-map unit=0 port=43 eth-macro=18 lane=3 max-speed=25g active=true +init set port-map unit=0 port=44 eth-macro=19 lane=0 max-speed=25g active=true +init set port-map unit=0 port=45 eth-macro=19 lane=1 max-speed=25g active=true +init set port-map unit=0 port=46 eth-macro=19 lane=2 max-speed=25g active=true +init set port-map unit=0 port=47 eth-macro=19 lane=3 max-speed=25g active=true +init set port-map unit=0 port=48 eth-macro=21 lane=0 max-speed=100g active=true +init set port-map unit=0 port=49 eth-macro=20 lane=0 max-speed=100g active=true +init set port-map unit=0 port=50 eth-macro=26 lane=0 max-speed=100g active=true +init set port-map unit=0 port=51 eth-macro=27 lane=0 max-speed=100g active=true +init set port-map unit=0 port=52 eth-macro=28 lane=0 max-speed=100g active=true +init set port-map unit=0 port=53 eth-macro=29 lane=0 max-speed=100g active=true +init set port-map unit=0 port=129 eth-macro=0 lane=1 max-speed=10g active=true guarantee=true cpi=true +init set port-map unit=0 port=130 eth-macro=0 lane=0 max-speed=10g active=true guarantee=true cpi=true init-done=true +init start stage unit=0 task-rsrc +init start stage unit=0 module +init start stage unit=0 task +phy set lane-swap unit=0 portlist=0 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=1 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=2 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=3 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=4 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=5 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=6 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=7 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=8 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=9 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=10 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=11 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=12 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=13 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=14 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=15 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=16 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=17 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=18 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=19 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=20 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=21 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=22 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=23 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=24 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=25 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=26 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=27 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=28 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=29 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=30 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=31 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=32 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=33 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=34 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=35 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=36 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=37 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=38 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=39 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=40 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=41 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=42 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=43 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=44 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=45 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=46 lane-cnt=1 property=tx data=0x2 +phy set lane-swap unit=0 portlist=47 lane-cnt=1 property=tx data=0x3 +phy set lane-swap unit=0 portlist=48 lane-cnt=4 property=tx data=0x1.3.0.2 +phy set lane-swap unit=0 portlist=49 lane-cnt=4 property=tx data=0x0.3.1.2 +phy set lane-swap unit=0 portlist=50 lane-cnt=4 property=tx data=0x1.3.0.2 +phy set lane-swap unit=0 portlist=51 lane-cnt=4 property=tx data=0x2.0.3.1 +phy set lane-swap unit=0 portlist=52 lane-cnt=4 property=tx data=0x3.2.1.0 +phy set lane-swap unit=0 portlist=53 lane-cnt=4 property=tx data=0x3.2.1.0 +phy set lane-swap unit=0 portlist=0 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=1 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=2 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=3 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=4 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=5 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=6 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=7 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=8 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=9 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=10 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=11 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=12 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=13 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=14 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=15 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=16 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=17 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=18 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=19 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=20 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=21 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=22 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=23 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=24 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=25 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=26 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=27 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=28 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=29 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=30 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=31 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=32 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=33 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=34 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=35 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=36 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=37 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=38 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=39 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=40 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=41 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=42 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=43 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=44 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=45 lane-cnt=1 property=rx data=0x2 +phy set lane-swap unit=0 portlist=46 lane-cnt=1 property=rx data=0x3 +phy set lane-swap unit=0 portlist=47 lane-cnt=1 property=rx data=0x0 +phy set lane-swap unit=0 portlist=48 lane-cnt=4 property=rx data=0x2.1.0.3 +phy set lane-swap unit=0 portlist=49 lane-cnt=4 property=rx data=0x0.1.3.2 +phy set lane-swap unit=0 portlist=50 lane-cnt=4 property=rx data=0x3.1.0.2 +phy set lane-swap unit=0 portlist=51 lane-cnt=4 property=rx data=0x1.3.0.2 +phy set lane-swap unit=0 portlist=52 lane-cnt=4 property=rx data=0x3.2.1.0 +phy set lane-swap unit=0 portlist=53 lane-cnt=4 property=rx data=0x3.2.1.0 +phy set polarity-rev unit=0 portlist=0 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=1 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=2 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=3 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=4 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=5 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=6 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=7 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=8 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=9 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=10 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=11 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=12 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=13 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=14 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=15 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=16 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=17 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=18 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=19 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=20 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=21 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=22 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=23 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=24 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=25 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=26 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=27 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=28 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=29 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=30 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=31 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=32 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=33 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=34 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=35 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=36 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=37 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=38 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=39 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=40 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=41 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=42 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=43 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=44 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=45 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=46 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=47 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=48 lane-cnt=4 property=tx data=0x0.0.0.1 +phy set polarity-rev unit=0 portlist=49 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=50 lane-cnt=4 property=tx data=0x1.1.0.0 +phy set polarity-rev unit=0 portlist=51 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=52 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=53 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=0 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=1 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=2 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=3 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=4 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=5 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=6 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=7 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=8 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=9 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=10 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=11 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=12 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=13 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=14 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=15 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=16 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=17 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=18 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=19 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=20 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=21 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=22 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=23 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=24 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=25 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=26 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=27 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=28 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=29 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=30 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=31 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=32 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=33 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=34 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=35 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=36 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=37 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=38 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=39 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=40 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=41 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=42 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=43 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=44 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=45 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=46 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=47 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=48 lane-cnt=4 property=rx data=0x0.1.0.1 +phy set polarity-rev unit=0 portlist=49 lane-cnt=4 property=rx data=0x1.0.1.0 +phy set polarity-rev unit=0 portlist=50 lane-cnt=4 property=rx data=0x0.0.1.0 +phy set polarity-rev unit=0 portlist=51 lane-cnt=4 property=rx data=0x0.0.0.1 +phy set polarity-rev unit=0 portlist=52 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=53 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=32 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=32 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=32 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=32 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=36 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=36 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=36 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=36 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=40 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=40 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=40 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=40 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=44 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=44 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=44 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=44 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=48 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=48 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=48 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=48 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=49 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=49 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=49 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=49 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=50 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=50 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=50 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=50 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=51 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=51 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=51 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=51 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=52 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=52 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=52 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=52 lane-cnt=4 property=c1 data=0x2.2.2.2 +phy set pre-emphasis unit=0 portlist=53 lane-cnt=4 property=c2 data=0x0.0.0.0 +phy set pre-emphasis unit=0 portlist=53 lane-cnt=4 property=cn1 data=0x4.4.4.4 +phy set pre-emphasis unit=0 portlist=53 lane-cnt=4 property=c0 data=0x1e.1e.1e.1e +phy set pre-emphasis unit=0 portlist=53 lane-cnt=4 property=c1 data=0x2.2.2.2 +port set property unit=0 portlist=0-47 speed=25g +port set property unit=0 portlist=48-53 speed=100g +port set property unit=0 portlist=129-130 speed=10g +port set property unit=0 portlist=0-47 medium-type=cr +port set property unit=0 portlist=48-53 medium-type=cr4 +port set property unit=0 portlist=129-130 medium-type=kr +port set adver unit=0 portlist=129-130 speed-10g-kr +port set property unit=0 portlist=129-130 an=enable +port set property unit=0 portlist=0-53,129-130 admin=enable diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config_as7116.ini b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config_as7116.ini deleted file mode 100644 index 0c124743d9ec..000000000000 --- a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/port_config_as7116.ini +++ /dev/null @@ -1,55 +0,0 @@ -# name lanes alias index -Ethernet0 8 Ethernet1/1 0 -Ethernet1 9 Ethernet2/1 1 -Ethernet2 10 Ethernet3/1 2 -Ethernet3 11 Ethernet4/1 3 -Ethernet4 12 Ethernet5/1 4 -Ethernet5 13 Ethernet6/1 5 -Ethernet6 14 Ethernet7/1 6 -Ethernet7 15 Ethernet8/1 7 -Ethernet8 16 Ethernet9/1 8 -Ethernet9 17 Ethernet10/1 9 -Ethernet10 18 Ethernet11/1 10 -Ethernet11 19 Ethernet12/1 11 -Ethernet12 20 Ethernet13/1 12 -Ethernet13 21 Ethernet14/1 13 -Ethernet14 22 Ethernet15/1 14 -Ethernet15 23 Ethernet16/1 15 -Ethernet16 32 Ethernet17/1 16 -Ethernet17 33 Ethernet18/1 17 -Ethernet18 34 Ethernet19/1 18 -Ethernet19 35 Ethernet20/1 19 -Ethernet20 40 Ethernet21/1 20 -Ethernet21 41 Ethernet22/1 21 -Ethernet22 42 Ethernet23/1 22 -Ethernet23 43 Ethernet24/1 23 -Ethernet24 48 Ethernet25/1 24 -Ethernet25 49 Ethernet26/1 25 -Ethernet26 50 Ethernet27/1 26 -Ethernet27 51 Ethernet28/1 27 -Ethernet28 56 Ethernet29/1 28 -Ethernet29 57 Ethernet30/1 29 -Ethernet30 58 Ethernet31/1 30 -Ethernet31 59 Ethernet32/1 31 -Ethernet32 64 Ethernet33/1 32 -Ethernet33 65 Ethernet34/1 33 -Ethernet34 66 Ethernet35/1 34 -Ethernet35 67 Ethernet36/1 35 -Ethernet36 68 Ethernet37/1 36 -Ethernet37 69 Ethernet38/1 37 -Ethernet38 70 Ethernet39/1 38 -Ethernet39 71 Ethernet40/1 39 -Ethernet40 72 Ethernet41/1 40 -Ethernet41 73 Ethernet42/1 41 -Ethernet42 74 Ethernet43/1 42 -Ethernet43 75 Ethernet44/1 43 -Ethernet44 76 Ethernet45/1 44 -Ethernet45 77 Ethernet46/1 45 -Ethernet46 78 Ethernet47/1 46 -Ethernet47 79 Ethernet48/1 47 -Ethernet48 80,81,82,83 Ethernet49/1 48 -Ethernet49 84,85,86,87 Ethernet50/1 49 -Ethernet50 104,105,106,107 Ethernet51/1 50 -Ethernet51 108,109,110,111 Ethernet52/1 51 -Ethernet52 112,113,114,115 Ethernet53/1 52 -Ethernet53 116,117,118,119 Ethernet54/1 56 \ No newline at end of file diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/qos.json.j2 b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/qos.json.j2 index 6f3f6990d87c..5c5fc6e4969b 100644 --- a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/qos.json.j2 +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/qos.json.j2 @@ -1,153 +1,136 @@ -{ - "TC_TO_PRIORITY_GROUP_MAP": { - "AZURE": { - "0": "1", - "1": "0", - "3": "3", - "4": "4" - } - }, - "MAP_PFC_PRIORITY_TO_QUEUE": { - "AZURE": { - "3": "3", - "4": "4" - } - }, - "TC_TO_QUEUE_MAP": { - "AZURE": { - "0": "1", - "1": "0", - "3": "3", - "4": "4" - } - }, - "DSCP_TO_TC_MAP": { - "AZURE": { - "0":"1", - "1":"0", - "2":"0", - "3":"3", - "4":"4", - "5":"0", - "6":"0", - "7":"0", - "8":"1", - "9":"0", - "10":"0", - "11":"0", - "12":"0", - "13":"0", - "14":"0", - "15":"0", - "16":"0", - "17":"0", - "18":"0", - "19":"0", - "20":"0", - "21":"0", - "22":"0", - "23":"0", - "24":"0", - "25":"0", - "26":"0", - "27":"0", - "28":"0", - "29":"0", - "30":"0", - "31":"0", - "32":"0", - "33":"0", - "34":"0", - "35":"0", - "36":"0", - "37":"0", - "38":"0", - "39":"0", - "40":"0", - "41":"0", - "42":"0", - "43":"0", - "44":"0", - "45":"0", - "46":"0", - "47":"0", - "48":"0", - "49":"0", - "50":"0", - "51":"0", - "52":"0", - "53":"0", - "54":"0", - "55":"0", - "56":"0", - "57":"0", - "58":"0", - "59":"0", - "60":"0", - "61":"0", - "62":"0", - "63":"0" - } - }, - "SCHEDULER": { - "scheduler.0" : { - "type":"DWRR", - "weight": "25" - }, - "scheduler.1" : { - "type":"DWRR", - "weight": "30" - }, - "scheduler.2" : { - "type":"DWRR", - "weight": "20" - } - }, - "PORT_QOS_MAP": { - "Ethernet0,Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53": { - "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", - "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", - "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", - "pfc_to_queue_map": "[MAP_PFC_PRIORITY_TO_QUEUE|AZURE]", - "pfc_enable": "3,4" - } - }, - "WRED_PROFILE": { - "AZURE_LOSSY" : { - "wred_green_enable":"true", - "wred_yellow_enable":"true", - "wred_red_enable":"true", - "ecn":"ecn_all", - "red_max_threshold":"516096", - "red_min_threshold":"516096", - "yellow_max_threshold":"516096", - "yellow_min_threshold":"516096", - "green_max_threshold": "184128", - "green_min_threshold": "184128" - }, - "AZURE_LOSSLESS" : { - "wred_green_enable":"true", - "wred_yellow_enable":"true", - "wred_red_enable":"true", - "ecn":"ecn_all", - "red_max_threshold":"516096", - "red_min_threshold":"516096", - "yellow_max_threshold":"516096", - "yellow_min_threshold":"516096", - "green_max_threshold": "184128", - "green_min_threshold": "184128" - } - }, - "QUEUE": { - "Ethernet0,Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53|3-4" : { - "scheduler" : "[SCHEDULER|scheduler.0]", - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" - }, - "Ethernet0,Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53|0" : { - "scheduler" : "[SCHEDULER|scheduler.1]" - }, - "Ethernet0,Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53|1" : { - "scheduler" : "[SCHEDULER|scheduler.2]" - } - } -} +{ + "TC_TO_PRIORITY_GROUP_MAP": { + "AZURE": { + "0": "1", + "1": "0", + "3": "3", + "4": "4" + } + }, + "MAP_PFC_PRIORITY_TO_QUEUE": { + "AZURE": { + "3": "3", + "4": "4" + } + }, + "TC_TO_QUEUE_MAP": { + "AZURE": { + "0": "1", + "1": "0", + "3": "3", + "4": "4" + } + }, + "DSCP_TO_TC_MAP": { + "AZURE": { + "0":"1", + "1":"0", + "2":"0", + "3":"3", + "4":"4", + "5":"0", + "6":"0", + "7":"0", + "8":"1", + "9":"0", + "10":"0", + "11":"0", + "12":"0", + "13":"0", + "14":"0", + "15":"0", + "16":"0", + "17":"0", + "18":"0", + "19":"0", + "20":"0", + "21":"0", + "22":"0", + "23":"0", + "24":"0", + "25":"0", + "26":"0", + "27":"0", + "28":"0", + "29":"0", + "30":"0", + "31":"0", + "32":"0", + "33":"0", + "34":"0", + "35":"0", + "36":"0", + "37":"0", + "38":"0", + "39":"0", + "40":"0", + "41":"0", + "42":"0", + "43":"0", + "44":"0", + "45":"0", + "46":"0", + "47":"0", + "48":"0", + "49":"0", + "50":"0", + "51":"0", + "52":"0", + "53":"0", + "54":"0", + "55":"0", + "56":"0", + "57":"0", + "58":"0", + "59":"0", + "60":"0", + "61":"0", + "62":"0", + "63":"0" + } + }, + "SCHEDULER": { + "scheduler.0" : { + "type":"DWRR", + "weight": "25" + }, + "scheduler.1" : { + "type":"DWRR", + "weight": "30" + }, + "scheduler.2" : { + "type":"DWRR", + "weight": "20" + } + }, + "PORT_QOS_MAP": { + }, + "WRED_PROFILE": { + "AZURE_LOSSY" : { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "wred_red_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"613984", + "red_min_threshold":"76608", + "yellow_max_threshold":"628320", + "yellow_min_threshold":"78400", + "green_max_threshold": "642656", + "green_min_threshold": "80192" + }, + "AZURE_LOSSLESS" : { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "wred_red_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"613984", + "red_min_threshold":"76608", + "yellow_max_threshold":"628320", + "yellow_min_threshold":"78400", + "green_max_threshold": "642656", + "green_min_threshold": "80192" + } + }, + "QUEUE": { + } +} diff --git a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/sai.profile b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/sai.profile index d43b2a33f42d..880f47910ac1 100644 --- a/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/sai.profile +++ b/device/accton/x86_64-accton_as7116_54x-r0/Accton-AS7116-54X/sai.profile @@ -1,2 +1,2 @@ -SAI_INIT_CONFIG_FILE=/etc/nps/tau-as7116-4806.cfg -SAI_DSH_CONFIG_FILE=/etc/nps/tau-as7116-4806.dsh +SAI_INIT_CONFIG_FILE=/usr/share/sonic/platform/led_proc_init.nps +SAI_DSH_CONFIG_FILE=/usr/share/sonic/hwsku/port_config.nps diff --git a/device/accton/x86_64-accton_as7116_54x-r0/installer.conf b/device/accton/x86_64-accton_as7116_54x-r0/installer.conf index 925a32fc0c3a..4eeedca86a48 100644 --- a/device/accton/x86_64-accton_as7116_54x-r0/installer.conf +++ b/device/accton/x86_64-accton_as7116_54x-r0/installer.conf @@ -1,3 +1,4 @@ CONSOLE_PORT=0x3f8 CONSOLE_DEV=0 CONSOLE_SPEED=115200 +ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="pci=noaer" \ No newline at end of file diff --git a/device/accton/x86_64-accton_as7116_54x-r0/led_proc_init.nps b/device/accton/x86_64-accton_as7116_54x-r0/led_proc_init.nps index 9a97d94c0b0e..e25c78018adb 100644 --- a/device/accton/x86_64-accton_as7116_54x-r0/led_proc_init.nps +++ b/device/accton/x86_64-accton_as7116_54x-r0/led_proc_init.nps @@ -1,20 +1,10 @@ -#This configuration file is for customer init value feature. Please refer to mtk_cfg.h/mtk_cfg.c for detail. -#1. The lines beginning with # are comment lines. The lines beginning with number are the setting lines. -#2. There are five parameters which can be set. -# 1) the first is unit. -# 2) the second is NPS_CFG_TYPE_XXX. Refer to NPS_CFG_TYPE_T. -# 3) the 3-5 are {param0, param1, value} pairs. Refer to NPS_CFG_VALUE_T. Support HEX format. -# 4) the (unit, NPS_CFG_TYPE_XXX, param0, param1) group is the key to get the correspingding value. -# There should be no same (unit, NPS_CFG_TYPE_XXX, param0, param1) group. -#3. User must follow correct format to apply the setting. Please refer to below commentted example(#0 NPS_CFG_TYPE_L2_ADDR_MODE 0 0 1); -#4. Usage under the linux shell: -# 1) ./image-path/image-name -c cfg-path/NPS_Ari_EVB_24.cfg : mamually specify directory path if they are not in current work dirctory. -# 2) ./image-name -c NPS_Ari_EVB_24.cfg : the image and the NPS_Ari_EVB_24.cfg are in the current work directory. - #unit NPS_CFG_TYPE_XXX param0 param1 value #---- ---------------- ------ ------ ----- 0 NPS_CFG_TYPE_USE_UNIT_PORT 0 0 1 -0 NPS_CFG_TYPE_LED_CFG 0 0 3 -0 NPS_CFG_TYPE_USER_BUF_CTRL 0 0 1 +0 NPS_CFG_TYPE_LED_CFG 0 0 5 0 NPS_CFG_TYPE_CPI_PORT_MODE 129 0 1 0 NPS_CFG_TYPE_CPI_PORT_MODE 130 0 1 +0 NPS_CFG_TYPE_USER_BUF_CTRL 0 0 1 +0 NPS_CFG_TYPE_HASH_L2_FDB_REGION_ENTRY_NUM 0 0 49152 +0 NPS_CFG_TYPE_HASH_L3_WITH_IPV6_PREFIX_64_REGION_ENTRY_NUM 0 0 32768 + diff --git a/device/accton/x86_64-accton_as7116_54x-r0/minigraph.xml b/device/accton/x86_64-accton_as7116_54x-r0/minigraph.xml index d538a8cbd709..91269c2f68f6 100644 --- a/device/accton/x86_64-accton_as7116_54x-r0/minigraph.xml +++ b/device/accton/x86_64-accton_as7116_54x-r0/minigraph.xml @@ -1,625 +1,6 @@ - - - ARISTA01T0 - 10.1.1.33 - switch1 - 10.0.0.32 - 1 - 180 - 60 - - - switch1 - 10.0.0.0 - ARISTA01T2 - 10.0.0.1 - 1 - 180 - 60 - - - ARISTA02T0 - 10.0.0.35 - switch1 - 10.0.0.34 - 1 - 180 - 60 - - - switch1 - 10.0.0.2 - ARISTA02T2 - 10.0.0.3 - 1 - 180 - 60 - - - ARISTA03T0 - 10.0.0.37 - switch1 - 10.0.0.36 - 1 - 180 - 60 - - - switch1 - 10.0.0.4 - ARISTA03T2 - 10.0.0.5 - 1 - 180 - 60 - - - ARISTA04T0 - 10.0.0.39 - switch1 - 10.0.0.38 - 1 - 180 - 60 - - - switch1 - 10.0.0.6 - ARISTA04T2 - 10.0.0.7 - 1 - 180 - 60 - - - ARISTA05T0 - 10.0.0.41 - switch1 - 10.0.0.40 - 1 - 180 - 60 - - - switch1 - 10.0.0.8 - ARISTA05T2 - 10.0.0.9 - 1 - 180 - 60 - - - ARISTA06T0 - 10.0.0.43 - switch1 - 10.0.0.42 - 1 - 180 - 60 - - - switch1 - 10.0.0.10 - ARISTA06T2 - 10.0.0.11 - 1 - 180 - 60 - - - ARISTA07T0 - 10.0.0.45 - switch1 - 10.0.0.44 - 1 - 180 - 60 - - - switch1 - 10.0.0.12 - ARISTA07T2 - 10.0.0.13 - 1 - 180 - 60 - - - ARISTA08T0 - 10.0.0.47 - switch1 - 10.0.0.46 - 1 - 180 - 60 - - - switch1 - 10.0.0.14 - ARISTA08T2 - 10.0.0.15 - 1 - 180 - 60 - - - ARISTA09T0 - 10.0.0.49 - switch1 - 10.0.0.48 - 1 - 180 - 60 - - - switch1 - 10.0.0.16 - ARISTA09T2 - 10.0.0.17 - 1 - 180 - 60 - - - ARISTA10T0 - 10.0.0.51 - switch1 - 10.0.0.50 - 1 - 180 - 60 - - - switch1 - 10.0.0.18 - ARISTA10T2 - 10.0.0.19 - 1 - 180 - 60 - - - ARISTA11T0 - 10.0.0.53 - switch1 - 10.0.0.52 - 1 - 180 - 60 - - - switch1 - 10.0.0.20 - ARISTA11T2 - 10.0.0.21 - 1 - 180 - 60 - - - ARISTA12T0 - 10.0.0.55 - switch1 - 10.0.0.54 - 1 - 180 - 60 - - - switch1 - 10.0.0.22 - ARISTA12T2 - 10.0.0.23 - 1 - 180 - 60 - - - ARISTA13T0 - 10.0.0.57 - switch1 - 10.0.0.56 - 1 - 180 - 60 - - - switch1 - 10.0.0.24 - ARISTA13T2 - 10.0.0.25 - 1 - 180 - 60 - - - ARISTA14T0 - 10.0.0.59 - switch1 - 10.0.0.58 - 1 - 180 - 60 - - - switch1 - 10.0.0.26 - ARISTA14T2 - 10.0.0.27 - 1 - 180 - 60 - - - ARISTA15T0 - 10.0.0.61 - switch1 - 10.0.0.60 - 1 - 180 - 60 - - - switch1 - 10.0.0.28 - ARISTA15T2 - 10.0.0.29 - 1 - 180 - 60 - - - ARISTA16T0 - 10.0.0.63 - switch1 - 10.0.0.62 - 1 - 180 - 60 - - - switch1 - 10.0.0.30 - ARISTA16T2 - 10.0.0.31 - 1 - 180 - 60 - - - - - 65100 - switch1 - - -
10.0.0.33
- - - - -
10.0.0.1
- - - - -
10.0.0.35
- - - - -
10.0.0.3
- - - - -
10.0.0.37
- - - - -
10.0.0.5
- - - - -
10.0.0.39
- - - - -
10.0.0.7
- - - - -
10.0.0.41
- - - - -
10.0.0.9
- - - - -
10.0.0.43
- - - - -
10.0.0.11
- - - - -
10.0.0.45
- - - - -
10.0.0.13
- - - - -
10.0.0.47
- - - - -
10.0.0.15
- - - - -
10.0.0.49
- - - - -
10.0.0.17
- - - - -
10.0.0.51
- - - - -
10.0.0.19
- - - - -
10.0.0.53
- - - - -
10.0.0.21
- - - - -
10.0.0.55
- - - - -
10.0.0.23
- - - - -
10.0.0.57
- - - - -
10.0.0.25
- - - - -
10.0.0.59
- - - - -
10.0.0.27
- - - - -
10.0.0.61
- - - - -
10.0.0.29
- - - - -
10.0.0.63
- - - - -
10.0.0.31
- - - - - - - - 64001 - ARISTA01T0 - - - - 65200 - ARISTA01T2 - - - - 64002 - ARISTA02T0 - - - - 65200 - ARISTA02T2 - - - - 64003 - ARISTA03T0 - - - - 65200 - ARISTA03T2 - - - - 64004 - ARISTA04T0 - - - - 65200 - ARISTA04T2 - - - - 64005 - ARISTA05T0 - - - - 65200 - ARISTA05T2 - - - - 64006 - ARISTA06T0 - - - - 65200 - ARISTA06T2 - - - - 64007 - ARISTA07T0 - - - - 65200 - ARISTA07T2 - - - - 64008 - ARISTA08T0 - - - - 65200 - ARISTA08T2 - - - - 64009 - ARISTA09T0 - - - - 65200 - ARISTA09T2 - - - - 64010 - ARISTA10T0 - - - - 65200 - ARISTA10T2 - - - - 64011 - ARISTA11T0 - - - - 65200 - ARISTA11T2 - - - - 64012 - ARISTA12T0 - - - - 65200 - ARISTA12T2 - - - - 64013 - ARISTA13T0 - - - - 65200 - ARISTA13T2 - - - - 64014 - ARISTA14T0 - - - - 65200 - ARISTA14T2 - - - - 64015 - ARISTA15T0 - - - - 65200 - ARISTA15T2 - - - - 64016 - ARISTA16T0 - - - - 65200 - ARISTA16T2 - - - @@ -642,168 +23,7 @@ switch1 - - - - Ethernet0 - 10.0.0.0/31 - - - - Ethernet4 - 10.0.0.2/31 - - - - Ethernet8 - 10.0.0.4/31 - - - - Ethernet12 - 10.0.0.6/31 - - - - Ethernet16 - 10.0.0.8/31 - - - - Ethernet20 - 10.0.0.10/31 - - - - Ethernet24 - 10.0.0.12/31 - - - - Ethernet28 - 10.0.0.14/31 - - - - Ethernet32 - 10.0.0.16/31 - - - - Ethernet36 - 10.0.0.18/31 - - - - Ethernet40 - 10.0.0.20/31 - - - - Ethernet44 - 10.0.0.22/31 - - - - Ethernet48 - 10.0.0.24/31 - - - - Ethernet52 - 10.0.0.26/31 - - - - Ethernet56 - 10.0.0.28/31 - - - - Ethernet60 - 10.0.0.30/31 - - - - Ethernet64 - 10.0.0.32/31 - - - - Ethernet68 - 10.0.0.34/31 - - - - Ethernet72 - 10.0.0.36/31 - - - - Ethernet76 - 10.0.0.38/31 - - - - Ethernet80 - 10.0.0.40/31 - - - - Ethernet84 - 10.0.0.42/31 - - - - Ethernet88 - 10.0.0.44/31 - - - - Ethernet92 - 10.0.0.46/31 - - - - Ethernet96 - 10.0.0.48/31 - - - - Ethernet100 - 10.0.0.50/31 - - - - Ethernet104 - 10.0.0.52/31 - - - - Ethernet108 - 10.0.0.54/31 - - - - Ethernet112 - 10.0.0.56/31 - - - - Ethernet116 - 10.0.0.58/31 - - - - Ethernet120 - 10.0.0.60/31 - - - - Ethernet124 - 10.0.0.62/31 - - + @@ -811,232 +31,6 @@ - - - DeviceInterfaceLink - switch1 - Ethernet0 - ARISTA01T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet4 - ARISTA02T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet8 - ARISTA03T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet12 - ARISTA04T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet16 - ARISTA05T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet20 - ARISTA06T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet24 - ARISTA07T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet28 - ARISTA08T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet32 - ARISTA09T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet36 - ARISTA10T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet40 - ARISTA11T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet44 - ARISTA12T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet48 - ARISTA13T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet52 - ARISTA14T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet56 - ARISTA15T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet60 - ARISTA16T2 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet64 - ARISTA01T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet68 - ARISTA02T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet72 - ARISTA03T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet76 - ARISTA04T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet80 - ARISTA05T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet84 - ARISTA06T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet88 - ARISTA07T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet92 - ARISTA08T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet96 - ARISTA09T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet100 - ARISTA10T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet104 - ARISTA11T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet108 - ARISTA12T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet112 - ARISTA13T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet116 - ARISTA14T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet120 - ARISTA15T0 - Ethernet1 - - - DeviceInterfaceLink - switch1 - Ethernet124 - ARISTA16T0 - Ethernet1 - - switch1 diff --git a/device/accton/x86_64-accton_as7116_54x-r0/plugins/psuutil.py b/device/accton/x86_64-accton_as7116_54x-r0/plugins/psuutil.py new file mode 100644 index 000000000000..08fd2648f314 --- /dev/null +++ b/device/accton/x86_64-accton_as7116_54x-r0/plugins/psuutil.py @@ -0,0 +1,92 @@ +# +# psuutil.py +# Platform-specific PSU status interface for SONiC +# + + +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError(str(e) + "- required module not found") + + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + SYSFS_PSU_DIR = ["/sys/bus/i2c/devices/10-0050", + "/sys/bus/i2c/devices/11-0053"] + + def __init__(self): + PsuBase.__init__(self) + + + # Get sysfs attribute + def get_attr_value(self, attr_path): + + retval = 'ERR' + if (not os.path.isfile(attr_path)): + return retval + + try: + with open(attr_path, 'r') as fd: + retval = fd.read() + except Exception as error: + logging.error("Unable to open ", attr_path, " file !") + + retval = retval.rstrip('\r\n') + return retval + + def get_num_psus(self): + """ + Retrieves the number of PSUs available on the device + :return: An integer, the number of PSUs available on the device + """ + MAX_PSUS = 2 + return MAX_PSUS + + def get_psu_status(self, index): + """ + Retrieves the oprational status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is operating properly, False if PSU is\ + faulty + """ + status = 0 + attr_file = 'psu_power_good' + attr_path = self.SYSFS_PSU_DIR[index-1] +'/' + attr_file + + attr_value = self.get_attr_value(attr_path) + + if (attr_value != 'ERR'): + attr_value = int(attr_value, 16) + # Check for PSU status + if (attr_value == 1): + status = 1 + + return status + + def get_psu_presence(self, index): + """ + Retrieves the presence status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is plugged, False if not + """ + status = 0 + psu_absent = 0 + attr_file ='psu_present' + attr_path = self.SYSFS_PSU_DIR[index-1] +'/' + attr_file + + attr_value = self.get_attr_value(attr_path) + + if (attr_value != 'ERR'): + attr_value = int(attr_value, 16) + # Check for PSU presence + if (attr_value == 1): + status = 1 + + return status + diff --git a/device/accton/x86_64-accton_as7116_54x-r0/plugins/sfputil.py b/device/accton/x86_64-accton_as7116_54x-r0/plugins/sfputil.py index 974bedc4db19..8abcd46ccb56 100644 --- a/device/accton/x86_64-accton_as7116_54x-r0/plugins/sfputil.py +++ b/device/accton/x86_64-accton_as7116_54x-r0/plugins/sfputil.py @@ -79,10 +79,7 @@ def __init__(self): eeprom_path = '/sys/bus/i2c/devices/{0}-0050/sfp_eeprom' for x in range(self._port_start, self._port_end + 1): port_eeprom_path = eeprom_path.format(self._port_to_i2c_mapping[x]) - if x == 53: - self._port_to_eeprom_mapping[56] = port_eeprom_path # ugly!!!! - else: - self._port_to_eeprom_mapping[x] = port_eeprom_path + self._port_to_eeprom_mapping[x] = port_eeprom_path SfpUtilBase.__init__(self) @@ -151,5 +148,3 @@ def qsfp_ports(self): @property def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping - - diff --git a/device/accton/x86_64-accton_as7116_54x-r0/sensors.conf b/device/accton/x86_64-accton_as7116_54x-r0/sensors.conf new file mode 100644 index 000000000000..9edb51a9e72d --- /dev/null +++ b/device/accton/x86_64-accton_as7116_54x-r0/sensors.conf @@ -0,0 +1,13 @@ +# libsensors configuration file + +chip "as7116_54x_fan-*" + label fan1 "front fan 1" + label fan2 "front fan 2" + label fan3 "front fan 3" + label fan4 "front fan 4" + label fan5 "front fan 5" + label fan6 "rear fan 1" + label fan7 "rear fan 2" + label fan8 "rear fan 3" + label fan9 "rear fan 4" + label fan10 "rear fan 5" diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers.json.j2 b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers.json.j2 new file mode 100644 index 000000000000..9354b7ec5b59 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers.json.j2 @@ -0,0 +1,2 @@ +{%- set default_topo = 't0' %} +{%- include 'buffers_config.j2' %} \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers_defaults_t0.j2 b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers_defaults_t0.j2 new file mode 100644 index 000000000000..b008aa892bc1 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers_defaults_t0.j2 @@ -0,0 +1,69 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '20971328' %} +{% set ingress_lossy_pool_size = '20971328' %} +{% set egress_lossless_pool_size = '20971328' %} +{% set egress_lossy_pool_size = '20971328' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0, 32) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx*4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "xon":"78400", + "xoff":"132160", + "size":"3584", + "static_th":"82880" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"3584", + "dynamic_th":"-1" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"3584", + "dynamic_th":"-4" + } + }, +{%- endmacro %} + +{# the typo of generate_pg_profils dued to buffers_config.j2 #} +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + } +{%- endmacro %} + +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + } +{%- endmacro %} \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers_defaults_t1.j2 b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers_defaults_t1.j2 new file mode 100644 index 000000000000..b008aa892bc1 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/buffers_defaults_t1.j2 @@ -0,0 +1,69 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '20971328' %} +{% set ingress_lossy_pool_size = '20971328' %} +{% set egress_lossless_pool_size = '20971328' %} +{% set egress_lossy_pool_size = '20971328' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0, 32) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx*4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "xon":"78400", + "xoff":"132160", + "size":"3584", + "static_th":"82880" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"3584", + "dynamic_th":"-1" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"3584", + "dynamic_th":"-4" + } + }, +{%- endmacro %} + +{# the typo of generate_pg_profils dued to buffers_config.j2 #} +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + } +{%- endmacro %} + +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + } +{%- endmacro %} \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/pg_profile_lookup.ini b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/pg_profile_lookup.ini new file mode 100644 index 000000000000..d98b0eca6d19 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/pg_profile_lookup.ini @@ -0,0 +1,17 @@ +# PG lossless profiles. +# speed cable size xon xoff threshold + 10000 5m 3584 32256 59136 36736 + 25000 5m 3584 41216 68096 45696 + 40000 5m 3584 47488 74368 51968 + 50000 5m 3584 52864 79744 57344 + 100000 5m 3584 78400 132160 82880 + 10000 40m 3584 32256 59136 36736 + 25000 40m 3584 41216 68096 45696 + 40000 40m 3584 47488 74368 51968 + 50000 40m 3584 52864 79744 57344 + 100000 40m 3584 78400 132160 82880 + 10000 300m 3584 32256 65856 36736 + 25000 300m 3584 41216 84672 45696 + 40000 300m 3584 47488 101024 51968 + 50000 300m 3584 52864 113120 57344 + 100000 300m 3584 78400 198688 82880 \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/port_config.nps.3T2AOC b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/port_config.nps.3T2AOC new file mode 100644 index 000000000000..f9e5396d0cfc --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/port_config.nps.3T2AOC @@ -0,0 +1,318 @@ +init start stage unit=0 low-level +init set port-map unit=0 port=0 eth-macro=0 lane=0 max-speed=100g active=true +init set port-map unit=0 port=1 eth-macro=1 lane=0 max-speed=100g active=true +init set port-map unit=0 port=2 eth-macro=2 lane=0 max-speed=100g active=true +init set port-map unit=0 port=3 eth-macro=3 lane=0 max-speed=100g active=true +init set port-map unit=0 port=4 eth-macro=4 lane=0 max-speed=100g active=true +init set port-map unit=0 port=5 eth-macro=5 lane=0 max-speed=100g active=true +init set port-map unit=0 port=6 eth-macro=6 lane=0 max-speed=100g active=true +init set port-map unit=0 port=7 eth-macro=7 lane=0 max-speed=100g active=true +init set port-map unit=0 port=8 eth-macro=8 lane=0 max-speed=100g active=true +init set port-map unit=0 port=9 eth-macro=9 lane=0 max-speed=100g active=true +init set port-map unit=0 port=10 eth-macro=10 lane=0 max-speed=100g active=true +init set port-map unit=0 port=11 eth-macro=11 lane=0 max-speed=100g active=true +init set port-map unit=0 port=12 eth-macro=12 lane=0 max-speed=100g active=true +init set port-map unit=0 port=13 eth-macro=13 lane=0 max-speed=100g active=true +init set port-map unit=0 port=14 eth-macro=14 lane=0 max-speed=100g active=true +init set port-map unit=0 port=15 eth-macro=15 lane=0 max-speed=100g active=true +init set port-map unit=0 port=16 eth-macro=16 lane=0 max-speed=100g active=true +init set port-map unit=0 port=17 eth-macro=17 lane=0 max-speed=100g active=true +init set port-map unit=0 port=18 eth-macro=18 lane=0 max-speed=100g active=true +init set port-map unit=0 port=19 eth-macro=19 lane=0 max-speed=100g active=true +init set port-map unit=0 port=20 eth-macro=20 lane=0 max-speed=100g active=true +init set port-map unit=0 port=21 eth-macro=21 lane=0 max-speed=100g active=true +init set port-map unit=0 port=22 eth-macro=22 lane=0 max-speed=100g active=true +init set port-map unit=0 port=23 eth-macro=23 lane=0 max-speed=100g active=true +init set port-map unit=0 port=24 eth-macro=24 lane=0 max-speed=100g active=true +init set port-map unit=0 port=25 eth-macro=25 lane=0 max-speed=100g active=true +init set port-map unit=0 port=26 eth-macro=26 lane=0 max-speed=100g active=true +init set port-map unit=0 port=27 eth-macro=27 lane=0 max-speed=100g active=true +init set port-map unit=0 port=28 eth-macro=28 lane=0 max-speed=100g active=true +init set port-map unit=0 port=29 eth-macro=29 lane=0 max-speed=100g active=true +init set port-map unit=0 port=30 eth-macro=30 lane=0 max-speed=100g active=true +init set port-map unit=0 port=31 eth-macro=31 lane=0 max-speed=100g active=true +init set port-map unit=0 port=129 eth-macro=0 lane=1 max-speed=10g active=true guarantee=true cpi=true +init set port-map unit=0 port=130 eth-macro=0 lane=0 max-speed=10g active=true guarantee=true cpi=true init-done=true +init start stage unit=0 task-rsrc +init start stage unit=0 module +init start stage unit=0 task +phy set lane-swap unit=0 portlist=0 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=1 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=2 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=3 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=4 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=5 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=6 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=7 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=8 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=9 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=10 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=11 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=12 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=13 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=14 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=15 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=16 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=17 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=18 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=19 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=20 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=21 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=22 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=23 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=24 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=25 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=26 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=27 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=28 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=29 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=30 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=31 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=129 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=130 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=0 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=1 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=2 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=3 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=4 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=5 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=6 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=7 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=8 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=9 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=10 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=11 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=12 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=13 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=14 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=15 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=16 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=17 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=18 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=19 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=20 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=21 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=22 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=23 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=24 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=25 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=26 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=27 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=28 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=29 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=30 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=31 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=129 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=130 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=0 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=1 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=2 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=3 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=4 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=5 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=6 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=7 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=8 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=9 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=10 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=11 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=12 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=13 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=14 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=15 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=16 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=17 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=18 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=19 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=20 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=21 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=22 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=23 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=24 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=25 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=26 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=27 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=28 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=29 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=30 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=31 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=129 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=130 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=0 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=1 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=2 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=3 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=4 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=5 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=6 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=7 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=8 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=9 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=10 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=11 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=12 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=13 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=14 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=15 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=16 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=17 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=18 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=19 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=20 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=21 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=22 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=23 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=24 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=25 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=26 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=27 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=28 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=29 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=30 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=31 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=129 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=130 lane-cnt=1 property=rx data=0x0 +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=cn1 data=0x01.01.01.01 +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=c0 data=0x1A.1A.1A.1A +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=c1 data=0x07.07.07.07 +phy set pre-emphasis unit=0 portlist=1 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=1 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=1 lane-cnt=4 property=c0 data=0x1A.1A.1A.1A +phy set pre-emphasis unit=0 portlist=1 lane-cnt=4 property=c1 data=0x07.07.07.07 +phy set pre-emphasis unit=0 portlist=2 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=2 lane-cnt=4 property=cn1 data=0x01.01.01.01 +phy set pre-emphasis unit=0 portlist=2 lane-cnt=4 property=c0 data=0x1B.1B.1B.1B +phy set pre-emphasis unit=0 portlist=2 lane-cnt=4 property=c1 data=0x07.07.07.07 +phy set pre-emphasis unit=0 portlist=3 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=3 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=3 lane-cnt=4 property=c0 data=0x1B.1B.1B.1B +phy set pre-emphasis unit=0 portlist=3 lane-cnt=4 property=c1 data=0x07.07.07.07 +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=c0 data=0x1B.1B.1B.1B +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=5 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=5 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=5 lane-cnt=4 property=c0 data=0x1B.1B.1B.1B +phy set pre-emphasis unit=0 portlist=5 lane-cnt=4 property=c1 data=0x07.07.07.07 +phy set pre-emphasis unit=0 portlist=6 lane-cnt=4 property=c2 data=0x03.03.03.03 +phy set pre-emphasis unit=0 portlist=6 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=6 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=6 lane-cnt=4 property=c1 data=0x05.05.05.05 +phy set pre-emphasis unit=0 portlist=7 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=7 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=7 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=7 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=9 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=9 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=9 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=9 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=10 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=10 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=10 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=10 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=11 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=11 lane-cnt=4 property=cn1 data=0x01.01.01.01 +phy set pre-emphasis unit=0 portlist=11 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=11 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=13 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=13 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=13 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=13 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=14 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=14 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=14 lane-cnt=4 property=c0 data=0x1D.1D.1D.1D +phy set pre-emphasis unit=0 portlist=14 lane-cnt=4 property=c1 data=0x05.05.05.05 +phy set pre-emphasis unit=0 portlist=15 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=15 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=15 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=15 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=c1 data=0x05.05.05.05 +phy set pre-emphasis unit=0 portlist=17 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=17 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=17 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=17 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=18 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=18 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=18 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=18 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=19 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=19 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=19 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=19 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=21 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=21 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=21 lane-cnt=4 property=c0 data=0x1B.1B.1B.1B +phy set pre-emphasis unit=0 portlist=21 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=22 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=22 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=22 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=22 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=23 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=23 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=23 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=23 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=25 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=25 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=25 lane-cnt=4 property=c0 data=0x1C.1C.1C.1C +phy set pre-emphasis unit=0 portlist=25 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=26 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=26 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=26 lane-cnt=4 property=c0 data=0x1B.1B.1B.1B +phy set pre-emphasis unit=0 portlist=26 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=27 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=27 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=27 lane-cnt=4 property=c0 data=0x1B.1B.1B.1B +phy set pre-emphasis unit=0 portlist=27 lane-cnt=4 property=c1 data=0x06.06.06.06 +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=c0 data=0x1B.1B.1B.1B +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=c1 data=0x07.07.07.07 +phy set pre-emphasis unit=0 portlist=29 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=29 lane-cnt=4 property=cn1 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=29 lane-cnt=4 property=c0 data=0x1A.1A.1A.1A +phy set pre-emphasis unit=0 portlist=29 lane-cnt=4 property=c1 data=0x07.07.07.07 +phy set pre-emphasis unit=0 portlist=30 lane-cnt=4 property=c2 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=30 lane-cnt=4 property=cn1 data=0x01.01.01.01 +phy set pre-emphasis unit=0 portlist=30 lane-cnt=4 property=c0 data=0x1A.1A.1A.1A +phy set pre-emphasis unit=0 portlist=30 lane-cnt=4 property=c1 data=0x07.07.07.07 +phy set pre-emphasis unit=0 portlist=31 lane-cnt=4 property=c2 data=0x01.01.01.01 +phy set pre-emphasis unit=0 portlist=31 lane-cnt=4 property=cn1 data=0x03.03.03.03 +phy set pre-emphasis unit=0 portlist=31 lane-cnt=4 property=c0 data=0x17.17.17.17 +phy set pre-emphasis unit=0 portlist=31 lane-cnt=4 property=c1 data=0x09.09.09.09 +phy set pre-emphasis unit=0 portlist=129 lane-cnt=1 property=c2 data=0x01 +phy set pre-emphasis unit=0 portlist=129 lane-cnt=1 property=cn1 data=0x01 +phy set pre-emphasis unit=0 portlist=129 lane-cnt=1 property=c0 data=0x02 +phy set pre-emphasis unit=0 portlist=129 lane-cnt=1 property=c1 data=0x03 +phy set pre-emphasis unit=0 portlist=130 lane-cnt=1 property=c2 data=0x01 +phy set pre-emphasis unit=0 portlist=130 lane-cnt=1 property=cn1 data=0x01 +phy set pre-emphasis unit=0 portlist=130 lane-cnt=1 property=c0 data=0x02 +phy set pre-emphasis unit=0 portlist=130 lane-cnt=1 property=c1 data=0x03 +port set property unit=0 portlist=0-31 speed=100g +port set property unit=0 portlist=129-130 speed=10g +port set property unit=0 portlist=0-31 medium-type=sr4 +port set property unit=0 portlist=129-130 medium-type=kr +port set property unit=0 portlist=0-31 fec=disable +port set adver unit=0 portlist=129-130 speed-10g-kr +port set property unit=0 portlist=129-130 an=enable +port set property unit=0 portlist=0-31,129-130 admin=enable diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/port_config.nps.3T2DAC b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/port_config.nps.3T2DAC new file mode 100644 index 000000000000..c8f6602f8ab1 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/port_config.nps.3T2DAC @@ -0,0 +1,318 @@ +init start stage unit=0 low-level +init set port-map unit=0 port=0 eth-macro=0 lane=0 max-speed=100g active=true +init set port-map unit=0 port=1 eth-macro=1 lane=0 max-speed=100g active=true +init set port-map unit=0 port=2 eth-macro=2 lane=0 max-speed=100g active=true +init set port-map unit=0 port=3 eth-macro=3 lane=0 max-speed=100g active=true +init set port-map unit=0 port=4 eth-macro=4 lane=0 max-speed=100g active=true +init set port-map unit=0 port=5 eth-macro=5 lane=0 max-speed=100g active=true +init set port-map unit=0 port=6 eth-macro=6 lane=0 max-speed=100g active=true +init set port-map unit=0 port=7 eth-macro=7 lane=0 max-speed=100g active=true +init set port-map unit=0 port=8 eth-macro=8 lane=0 max-speed=100g active=true +init set port-map unit=0 port=9 eth-macro=9 lane=0 max-speed=100g active=true +init set port-map unit=0 port=10 eth-macro=10 lane=0 max-speed=100g active=true +init set port-map unit=0 port=11 eth-macro=11 lane=0 max-speed=100g active=true +init set port-map unit=0 port=12 eth-macro=12 lane=0 max-speed=100g active=true +init set port-map unit=0 port=13 eth-macro=13 lane=0 max-speed=100g active=true +init set port-map unit=0 port=14 eth-macro=14 lane=0 max-speed=100g active=true +init set port-map unit=0 port=15 eth-macro=15 lane=0 max-speed=100g active=true +init set port-map unit=0 port=16 eth-macro=16 lane=0 max-speed=100g active=true +init set port-map unit=0 port=17 eth-macro=17 lane=0 max-speed=100g active=true +init set port-map unit=0 port=18 eth-macro=18 lane=0 max-speed=100g active=true +init set port-map unit=0 port=19 eth-macro=19 lane=0 max-speed=100g active=true +init set port-map unit=0 port=20 eth-macro=20 lane=0 max-speed=100g active=true +init set port-map unit=0 port=21 eth-macro=21 lane=0 max-speed=100g active=true +init set port-map unit=0 port=22 eth-macro=22 lane=0 max-speed=100g active=true +init set port-map unit=0 port=23 eth-macro=23 lane=0 max-speed=100g active=true +init set port-map unit=0 port=24 eth-macro=24 lane=0 max-speed=100g active=true +init set port-map unit=0 port=25 eth-macro=25 lane=0 max-speed=100g active=true +init set port-map unit=0 port=26 eth-macro=26 lane=0 max-speed=100g active=true +init set port-map unit=0 port=27 eth-macro=27 lane=0 max-speed=100g active=true +init set port-map unit=0 port=28 eth-macro=28 lane=0 max-speed=100g active=true +init set port-map unit=0 port=29 eth-macro=29 lane=0 max-speed=100g active=true +init set port-map unit=0 port=30 eth-macro=30 lane=0 max-speed=100g active=true +init set port-map unit=0 port=31 eth-macro=31 lane=0 max-speed=100g active=true +init set port-map unit=0 port=129 eth-macro=0 lane=1 max-speed=10g active=true guarantee=true cpi=true +init set port-map unit=0 port=130 eth-macro=0 lane=0 max-speed=10g active=true guarantee=true cpi=true init-done=true +init start stage unit=0 task-rsrc +init start stage unit=0 module +init start stage unit=0 task +phy set lane-swap unit=0 portlist=0 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=1 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=2 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=3 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=4 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=5 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=6 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=7 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=8 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=9 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=10 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=11 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=12 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=13 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=14 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=15 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=16 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=17 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=18 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=19 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=20 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=21 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=22 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=23 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=24 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=25 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=26 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=27 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=28 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=29 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=30 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=31 lane-cnt=4 property=tx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=129 lane-cnt=1 property=tx data=0x1 +phy set lane-swap unit=0 portlist=130 lane-cnt=1 property=tx data=0x0 +phy set lane-swap unit=0 portlist=0 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=1 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=2 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=3 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=4 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=5 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=6 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=7 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=8 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=9 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=10 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=11 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=12 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=13 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=14 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=15 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=16 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=17 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=18 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=19 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=20 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=21 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=22 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=23 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=24 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=25 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=26 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=27 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=28 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=29 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=30 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=31 lane-cnt=4 property=rx data=0x03.02.01.00 +phy set lane-swap unit=0 portlist=129 lane-cnt=1 property=rx data=0x1 +phy set lane-swap unit=0 portlist=130 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=0 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=1 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=2 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=3 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=4 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=5 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=6 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=7 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=8 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=9 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=10 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=11 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=12 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=13 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=14 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=15 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=16 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=17 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=18 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=19 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=20 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=21 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=22 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=23 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=24 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=25 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=26 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=27 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=28 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=29 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=30 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=31 lane-cnt=4 property=tx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=129 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=130 lane-cnt=1 property=tx data=0x0 +phy set polarity-rev unit=0 portlist=0 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=1 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=2 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=3 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=4 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=5 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=6 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=7 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=8 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=9 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=10 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=11 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=12 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=13 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=14 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=15 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=16 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=17 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=18 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=19 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=20 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=21 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=22 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=23 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=24 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=25 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=26 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=27 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=28 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=29 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=30 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=31 lane-cnt=4 property=rx data=0x0.0.0.0 +phy set polarity-rev unit=0 portlist=129 lane-cnt=1 property=rx data=0x0 +phy set polarity-rev unit=0 portlist=130 lane-cnt=1 property=rx data=0x0 +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=0 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=1 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=1 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=1 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=1 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=2 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=2 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=2 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=2 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=3 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=3 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=3 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=3 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=4 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=5 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=5 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=5 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=5 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=6 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=6 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=6 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=6 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=7 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=7 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=7 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=7 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=8 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=9 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=9 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=9 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=9 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=10 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=10 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=10 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=10 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=11 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=11 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=11 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=11 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=12 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=13 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=13 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=13 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=13 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=14 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=14 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=14 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=14 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=15 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=15 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=15 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=15 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=16 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=17 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=17 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=17 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=17 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=18 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=18 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=18 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=18 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=19 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=19 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=19 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=19 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=20 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=21 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=21 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=21 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=21 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=22 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=22 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=22 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=22 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=23 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=23 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=23 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=23 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=24 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=25 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=25 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=25 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=25 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=26 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=26 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=26 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=26 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=27 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=27 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=27 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=27 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=28 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=29 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=29 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=29 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=29 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=30 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=30 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=30 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=30 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=31 lane-cnt=4 property=c2 data=0x00.00.00.00 +phy set pre-emphasis unit=0 portlist=31 lane-cnt=4 property=cn1 data=0x04.04.04.04 +phy set pre-emphasis unit=0 portlist=31 lane-cnt=4 property=c0 data=0x1E.1E.1E.1E +phy set pre-emphasis unit=0 portlist=31 lane-cnt=4 property=c1 data=0x02.02.02.02 +phy set pre-emphasis unit=0 portlist=129 lane-cnt=1 property=c2 data=0x01 +phy set pre-emphasis unit=0 portlist=129 lane-cnt=1 property=cn1 data=0x01 +phy set pre-emphasis unit=0 portlist=129 lane-cnt=1 property=c0 data=0x02 +phy set pre-emphasis unit=0 portlist=129 lane-cnt=1 property=c1 data=0x03 +phy set pre-emphasis unit=0 portlist=130 lane-cnt=1 property=c2 data=0x01 +phy set pre-emphasis unit=0 portlist=130 lane-cnt=1 property=cn1 data=0x01 +phy set pre-emphasis unit=0 portlist=130 lane-cnt=1 property=c0 data=0x02 +phy set pre-emphasis unit=0 portlist=130 lane-cnt=1 property=c1 data=0x03 +port set property unit=0 portlist=0-31 speed=100g +port set property unit=0 portlist=129-130 speed=10g +port set property unit=0 portlist=0-31 medium-type=cr4 +port set property unit=0 portlist=129-130 medium-type=kr +port set property unit=0 portlist=0-31 fec=disable +port set adver unit=0 portlist=129-130 speed-10g-kr +port set property unit=0 portlist=129-130 an=enable +port set property unit=0 portlist=0-31,129-130 admin=enable diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/qos.json.j2 b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/qos.json.j2 index 62464d7d39f0..5c5fc6e4969b 100644 --- a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/qos.json.j2 +++ b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/INGRASYS-S9130-32X/qos.json.j2 @@ -1,153 +1,136 @@ -{ - "TC_TO_PRIORITY_GROUP_MAP": { - "AZURE": { - "0": "1", - "1": "0", - "3": "3", - "4": "4" - } - }, - "MAP_PFC_PRIORITY_TO_QUEUE": { - "AZURE": { - "3": "3", - "4": "4" - } - }, - "TC_TO_QUEUE_MAP": { - "AZURE": { - "0": "1", - "1": "0", - "3": "3", - "4": "4" - } - }, - "DSCP_TO_TC_MAP": { - "AZURE": { - "0":"1", - "1":"0", - "2":"0", - "3":"3", - "4":"4", - "5":"0", - "6":"0", - "7":"0", - "8":"1", - "9":"0", - "10":"0", - "11":"0", - "12":"0", - "13":"0", - "14":"0", - "15":"0", - "16":"0", - "17":"0", - "18":"0", - "19":"0", - "20":"0", - "21":"0", - "22":"0", - "23":"0", - "24":"0", - "25":"0", - "26":"0", - "27":"0", - "28":"0", - "29":"0", - "30":"0", - "31":"0", - "32":"0", - "33":"0", - "34":"0", - "35":"0", - "36":"0", - "37":"0", - "38":"0", - "39":"0", - "40":"0", - "41":"0", - "42":"0", - "43":"0", - "44":"0", - "45":"0", - "46":"0", - "47":"0", - "48":"0", - "49":"0", - "50":"0", - "51":"0", - "52":"0", - "53":"0", - "54":"0", - "55":"0", - "56":"0", - "57":"0", - "58":"0", - "59":"0", - "60":"0", - "61":"0", - "62":"0", - "63":"0" - } - }, - "SCHEDULER": { - "scheduler.0" : { - "type":"DWRR", - "weight": "25" - }, - "scheduler.1" : { - "type":"DWRR", - "weight": "30" - }, - "scheduler.2" : { - "type":"DWRR", - "weight": "20" - } - }, - "PORT_QOS_MAP": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124": { - "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", - "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", - "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", - "pfc_to_queue_map": "[MAP_PFC_PRIORITY_TO_QUEUE|AZURE]", - "pfc_enable": "3,4" - } - }, - "WRED_PROFILE": { - "AZURE_LOSSY" : { - "wred_green_enable":"true", - "wred_yellow_enable":"true", - "wred_red_enable":"true", - "ecn":"ecn_all", - "red_max_threshold":"516096", - "red_min_threshold":"516096", - "yellow_max_threshold":"516096", - "yellow_min_threshold":"516096", - "green_max_threshold": "184128", - "green_min_threshold": "184128" - }, - "AZURE_LOSSLESS" : { - "wred_green_enable":"true", - "wred_yellow_enable":"true", - "wred_red_enable":"true", - "ecn":"ecn_all", - "red_max_threshold":"516096", - "red_min_threshold":"516096", - "yellow_max_threshold":"516096", - "yellow_min_threshold":"516096", - "green_max_threshold": "184128", - "green_min_threshold": "184128" - } - }, - "QUEUE": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|3-4" : { - "scheduler" : "[SCHEDULER|scheduler.0]", - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0" : { - "scheduler" : "[SCHEDULER|scheduler.1]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|1" : { - "scheduler" : "[SCHEDULER|scheduler.2]" - } - } -} +{ + "TC_TO_PRIORITY_GROUP_MAP": { + "AZURE": { + "0": "1", + "1": "0", + "3": "3", + "4": "4" + } + }, + "MAP_PFC_PRIORITY_TO_QUEUE": { + "AZURE": { + "3": "3", + "4": "4" + } + }, + "TC_TO_QUEUE_MAP": { + "AZURE": { + "0": "1", + "1": "0", + "3": "3", + "4": "4" + } + }, + "DSCP_TO_TC_MAP": { + "AZURE": { + "0":"1", + "1":"0", + "2":"0", + "3":"3", + "4":"4", + "5":"0", + "6":"0", + "7":"0", + "8":"1", + "9":"0", + "10":"0", + "11":"0", + "12":"0", + "13":"0", + "14":"0", + "15":"0", + "16":"0", + "17":"0", + "18":"0", + "19":"0", + "20":"0", + "21":"0", + "22":"0", + "23":"0", + "24":"0", + "25":"0", + "26":"0", + "27":"0", + "28":"0", + "29":"0", + "30":"0", + "31":"0", + "32":"0", + "33":"0", + "34":"0", + "35":"0", + "36":"0", + "37":"0", + "38":"0", + "39":"0", + "40":"0", + "41":"0", + "42":"0", + "43":"0", + "44":"0", + "45":"0", + "46":"0", + "47":"0", + "48":"0", + "49":"0", + "50":"0", + "51":"0", + "52":"0", + "53":"0", + "54":"0", + "55":"0", + "56":"0", + "57":"0", + "58":"0", + "59":"0", + "60":"0", + "61":"0", + "62":"0", + "63":"0" + } + }, + "SCHEDULER": { + "scheduler.0" : { + "type":"DWRR", + "weight": "25" + }, + "scheduler.1" : { + "type":"DWRR", + "weight": "30" + }, + "scheduler.2" : { + "type":"DWRR", + "weight": "20" + } + }, + "PORT_QOS_MAP": { + }, + "WRED_PROFILE": { + "AZURE_LOSSY" : { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "wred_red_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"613984", + "red_min_threshold":"76608", + "yellow_max_threshold":"628320", + "yellow_min_threshold":"78400", + "green_max_threshold": "642656", + "green_min_threshold": "80192" + }, + "AZURE_LOSSLESS" : { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "wred_red_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"613984", + "red_min_threshold":"76608", + "yellow_max_threshold":"628320", + "yellow_min_threshold":"78400", + "green_max_threshold": "642656", + "green_min_threshold": "80192" + } + }, + "QUEUE": { + } +} diff --git a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/minigraph.xml b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/minigraph.xml index 6b29a7eb83b8..949ea6641b07 100644 --- a/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/minigraph.xml +++ b/device/ingrasys/x86_64-ingrasys_s9130_32x-r0/minigraph.xml @@ -1,55 +1,6 @@ - - - OCPSCH0104001MS - 10.10.1.26 - OCPSCH01040GGLF - 10.10.1.25 - 1 - 10 - 3 - - - OCPSCH0104002MS - 10.10.2.26 - OCPSCH01040GGLF - 10.10.2.25 - 1 - 10 - 3 - - - - - 64536 - OCPSCH01040GGLF - - -
10.10.1.26
- - - - -
10.10.2.26
- - - - - - - - 64542 - OCPSCH0104001MS - - - - 64543 - OCPSCH0104002MS - - - @@ -72,18 +23,7 @@ OCPSCH01040GGLF - - - - Ethernet0 - 10.10.1.25/30 - - - - Ethernet4 - 10.10.2.25/30 - - + @@ -91,24 +31,7 @@ - - - 40000 - DeviceInterfaceLink - OCPSCH0104001MS - Ethernet24 - OCPSCH01040GGLF - Ethernet0 - - - 40000 - DeviceInterfaceLink - OCPSCH0104002MS - Ethernet24 - OCPSCH01040GGLF - Ethernet4 - - + OCPSCH01040GGLF @@ -136,11 +59,6 @@ - - ErspanDestinationIpv4 - - 2.2.2.2 - diff --git a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers.json.j2 b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers.json.j2 new file mode 100644 index 000000000000..9354b7ec5b59 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers.json.j2 @@ -0,0 +1,2 @@ +{%- set default_topo = 't0' %} +{%- include 'buffers_config.j2' %} \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers_defaults_t0.j2 b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers_defaults_t0.j2 new file mode 100644 index 000000000000..82194b2c3188 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers_defaults_t0.j2 @@ -0,0 +1,69 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '20971328' %} +{% set ingress_lossy_pool_size = '20971328' %} +{% set egress_lossless_pool_size = '20971328' %} +{% set egress_lossy_pool_size = '20971328' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0, 64) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx*4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "xon":"78400", + "xoff":"132160", + "size":"3584", + "static_th":"82880" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"3584", + "dynamic_th":"-1" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"3584", + "dynamic_th":"-4" + } + }, +{%- endmacro %} + +{# the typo of generate_pg_profils dued to buffers_config.j2 #} +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + } +{%- endmacro %} + +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + } +{%- endmacro %} \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers_defaults_t1.j2 b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers_defaults_t1.j2 new file mode 100644 index 000000000000..82194b2c3188 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/buffers_defaults_t1.j2 @@ -0,0 +1,69 @@ +{% set default_cable = '5m' %} +{% set ingress_lossless_pool_size = '20971328' %} +{% set ingress_lossy_pool_size = '20971328' %} +{% set egress_lossless_pool_size = '20971328' %} +{% set egress_lossy_pool_size = '20971328' %} + +{%- macro generate_port_lists(PORT_ALL) %} + {# Generate list of ports #} + {%- for port_idx in range(0, 64) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx*4)) %}{%- endif %} + {%- endfor %} +{%- endmacro %} + +{%- macro generate_buffer_pool_and_profiles() %} + "BUFFER_POOL": { + "ingress_lossless_pool": { + "size": "{{ ingress_lossless_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "ingress_lossy_pool": { + "size": "{{ ingress_lossy_pool_size }}", + "type": "ingress", + "mode": "dynamic" + }, + "egress_lossless_pool": { + "size": "{{ egress_lossless_pool_size }}", + "type": "egress", + "mode": "dynamic" + }, + "egress_lossy_pool": { + "size": "{{ egress_lossy_pool_size }}", + "type": "egress", + "mode": "dynamic" + } + }, + "BUFFER_PROFILE": { + "ingress_lossless_profile": { + "pool":"[BUFFER_POOL|ingress_lossless_pool]", + "xon":"78400", + "xoff":"132160", + "size":"3584", + "static_th":"82880" + }, + "ingress_lossy_profile": { + "pool":"[BUFFER_POOL|ingress_lossy_pool]", + "size":"3584", + "dynamic_th":"-1" + }, + "egress_lossy_profile": { + "pool":"[BUFFER_POOL|egress_lossy_pool]", + "size":"3584", + "dynamic_th":"-4" + } + }, +{%- endmacro %} + +{# the typo of generate_pg_profils dued to buffers_config.j2 #} +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_pg_profils(port_names) %} + "BUFFER_PG": { + } +{%- endmacro %} + +{# Default, we do not bind any buffer profiles. #} +{%- macro generate_queue_buffers(port_names) %} + "BUFFER_QUEUE": { + } +{%- endmacro %} \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/pg_profile_lookup.ini b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/pg_profile_lookup.ini new file mode 100644 index 000000000000..d98b0eca6d19 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/pg_profile_lookup.ini @@ -0,0 +1,17 @@ +# PG lossless profiles. +# speed cable size xon xoff threshold + 10000 5m 3584 32256 59136 36736 + 25000 5m 3584 41216 68096 45696 + 40000 5m 3584 47488 74368 51968 + 50000 5m 3584 52864 79744 57344 + 100000 5m 3584 78400 132160 82880 + 10000 40m 3584 32256 59136 36736 + 25000 40m 3584 41216 68096 45696 + 40000 40m 3584 47488 74368 51968 + 50000 40m 3584 52864 79744 57344 + 100000 40m 3584 78400 132160 82880 + 10000 300m 3584 32256 65856 36736 + 25000 300m 3584 41216 84672 45696 + 40000 300m 3584 47488 101024 51968 + 50000 300m 3584 52864 113120 57344 + 100000 300m 3584 78400 198688 82880 \ No newline at end of file diff --git a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/qos.json.j2 b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/qos.json.j2 index 434226afca71..5c5fc6e4969b 100644 --- a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/qos.json.j2 +++ b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/INGRASYS-S9230-64X/qos.json.j2 @@ -1,153 +1,136 @@ -{ - "TC_TO_PRIORITY_GROUP_MAP": { - "AZURE": { - "0": "1", - "1": "0", - "3": "3", - "4": "4" - } - }, - "MAP_PFC_PRIORITY_TO_QUEUE": { - "AZURE": { - "3": "3", - "4": "4" - } - }, - "TC_TO_QUEUE_MAP": { - "AZURE": { - "0": "1", - "1": "0", - "3": "3", - "4": "4" - } - }, - "DSCP_TO_TC_MAP": { - "AZURE": { - "0":"1", - "1":"0", - "2":"0", - "3":"3", - "4":"4", - "5":"0", - "6":"0", - "7":"0", - "8":"1", - "9":"0", - "10":"0", - "11":"0", - "12":"0", - "13":"0", - "14":"0", - "15":"0", - "16":"0", - "17":"0", - "18":"0", - "19":"0", - "20":"0", - "21":"0", - "22":"0", - "23":"0", - "24":"0", - "25":"0", - "26":"0", - "27":"0", - "28":"0", - "29":"0", - "30":"0", - "31":"0", - "32":"0", - "33":"0", - "34":"0", - "35":"0", - "36":"0", - "37":"0", - "38":"0", - "39":"0", - "40":"0", - "41":"0", - "42":"0", - "43":"0", - "44":"0", - "45":"0", - "46":"0", - "47":"0", - "48":"0", - "49":"0", - "50":"0", - "51":"0", - "52":"0", - "53":"0", - "54":"0", - "55":"0", - "56":"0", - "57":"0", - "58":"0", - "59":"0", - "60":"0", - "61":"0", - "62":"0", - "63":"0" - } - }, - "SCHEDULER": { - "scheduler.0" : { - "type":"DWRR", - "weight": "25" - }, - "scheduler.1" : { - "type":"DWRR", - "weight": "30" - }, - "scheduler.2" : { - "type":"DWRR", - "weight": "20" - } - }, - "PORT_QOS_MAP": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124,Ethernet128,Ethernet132,Ethernet136,Ethernet140,Ethernet144,Ethernet148,Ethernet152,Ethernet156,Ethernet160,Ethernet164,Ethernet168,Ethernet172,Ethernet176,Ethernet180,Ethernet184,Ethernet188,Ethernet192,Ethernet196,Ethernet200,Ethernet204,Ethernet208,Ethernet212,Ethernet216,Ethernet220,Ethernet224,Ethernet228,Ethernet232,Ethernet236,Ethernet240,Ethernet244,Ethernet248,Ethernet252": { - "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", - "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", - "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", - "pfc_to_queue_map": "[MAP_PFC_PRIORITY_TO_QUEUE|AZURE]", - "pfc_enable": "3,4" - } - }, - "WRED_PROFILE": { - "AZURE_LOSSY" : { - "wred_green_enable":"true", - "wred_yellow_enable":"true", - "wred_red_enable":"true", - "ecn":"ecn_all", - "red_max_threshold":"516096", - "red_min_threshold":"516096", - "yellow_max_threshold":"516096", - "yellow_min_threshold":"516096", - "green_max_threshold": "184128", - "green_min_threshold": "184128" - }, - "AZURE_LOSSLESS" : { - "wred_green_enable":"true", - "wred_yellow_enable":"true", - "wred_red_enable":"true", - "ecn":"ecn_all", - "red_max_threshold":"516096", - "red_min_threshold":"516096", - "yellow_max_threshold":"516096", - "yellow_min_threshold":"516096", - "green_max_threshold": "184128", - "green_min_threshold": "184128" - } - }, - "QUEUE": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124,Ethernet128,Ethernet132,Ethernet136,Ethernet140,Ethernet144,Ethernet148,Ethernet152,Ethernet156,Ethernet160,Ethernet164,Ethernet168,Ethernet172,Ethernet176,Ethernet180,Ethernet184,Ethernet188,Ethernet192,Ethernet196,Ethernet200,Ethernet204,Ethernet208,Ethernet212,Ethernet216,Ethernet220,Ethernet224,Ethernet228,Ethernet232,Ethernet236,Ethernet240,Ethernet244,Ethernet248,Ethernet252|3-4" : { - "scheduler" : "[SCHEDULER|scheduler.0]", - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124,Ethernet128,Ethernet132,Ethernet136,Ethernet140,Ethernet144,Ethernet148,Ethernet152,Ethernet156,Ethernet160,Ethernet164,Ethernet168,Ethernet172,Ethernet176,Ethernet180,Ethernet184,Ethernet188,Ethernet192,Ethernet196,Ethernet200,Ethernet204,Ethernet208,Ethernet212,Ethernet216,Ethernet220,Ethernet224,Ethernet228,Ethernet232,Ethernet236,Ethernet240,Ethernet244,Ethernet248,Ethernet252|0" : { - "scheduler" : "[SCHEDULER|scheduler.1]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124,Ethernet128,Ethernet132,Ethernet136,Ethernet140,Ethernet144,Ethernet148,Ethernet152,Ethernet156,Ethernet160,Ethernet164,Ethernet168,Ethernet172,Ethernet176,Ethernet180,Ethernet184,Ethernet188,Ethernet192,Ethernet196,Ethernet200,Ethernet204,Ethernet208,Ethernet212,Ethernet216,Ethernet220,Ethernet224,Ethernet228,Ethernet232,Ethernet236,Ethernet240,Ethernet244,Ethernet248,Ethernet252|1" : { - "scheduler" : "[SCHEDULER|scheduler.2]" - } - } -} +{ + "TC_TO_PRIORITY_GROUP_MAP": { + "AZURE": { + "0": "1", + "1": "0", + "3": "3", + "4": "4" + } + }, + "MAP_PFC_PRIORITY_TO_QUEUE": { + "AZURE": { + "3": "3", + "4": "4" + } + }, + "TC_TO_QUEUE_MAP": { + "AZURE": { + "0": "1", + "1": "0", + "3": "3", + "4": "4" + } + }, + "DSCP_TO_TC_MAP": { + "AZURE": { + "0":"1", + "1":"0", + "2":"0", + "3":"3", + "4":"4", + "5":"0", + "6":"0", + "7":"0", + "8":"1", + "9":"0", + "10":"0", + "11":"0", + "12":"0", + "13":"0", + "14":"0", + "15":"0", + "16":"0", + "17":"0", + "18":"0", + "19":"0", + "20":"0", + "21":"0", + "22":"0", + "23":"0", + "24":"0", + "25":"0", + "26":"0", + "27":"0", + "28":"0", + "29":"0", + "30":"0", + "31":"0", + "32":"0", + "33":"0", + "34":"0", + "35":"0", + "36":"0", + "37":"0", + "38":"0", + "39":"0", + "40":"0", + "41":"0", + "42":"0", + "43":"0", + "44":"0", + "45":"0", + "46":"0", + "47":"0", + "48":"0", + "49":"0", + "50":"0", + "51":"0", + "52":"0", + "53":"0", + "54":"0", + "55":"0", + "56":"0", + "57":"0", + "58":"0", + "59":"0", + "60":"0", + "61":"0", + "62":"0", + "63":"0" + } + }, + "SCHEDULER": { + "scheduler.0" : { + "type":"DWRR", + "weight": "25" + }, + "scheduler.1" : { + "type":"DWRR", + "weight": "30" + }, + "scheduler.2" : { + "type":"DWRR", + "weight": "20" + } + }, + "PORT_QOS_MAP": { + }, + "WRED_PROFILE": { + "AZURE_LOSSY" : { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "wred_red_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"613984", + "red_min_threshold":"76608", + "yellow_max_threshold":"628320", + "yellow_min_threshold":"78400", + "green_max_threshold": "642656", + "green_min_threshold": "80192" + }, + "AZURE_LOSSLESS" : { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "wred_red_enable":"true", + "ecn":"ecn_all", + "red_max_threshold":"613984", + "red_min_threshold":"76608", + "yellow_max_threshold":"628320", + "yellow_min_threshold":"78400", + "green_max_threshold": "642656", + "green_min_threshold": "80192" + } + }, + "QUEUE": { + } +} diff --git a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/minigraph.xml b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/minigraph.xml index 9ac02997e44d..048bbbdd156f 100644 --- a/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/minigraph.xml +++ b/device/ingrasys/x86_64-ingrasys_s9230_64x-r0/minigraph.xml @@ -1,55 +1,6 @@ - - - OCPSCH0104001MS - 10.10.1.26 - OCPSCH01040GGLF - 10.10.1.25 - 1 - 10 - 3 - - - OCPSCH0104002MS - 10.10.2.26 - OCPSCH01040GGLF - 10.10.2.25 - 1 - 10 - 3 - - - - - 64536 - OCPSCH01040GGLF - - -
10.10.1.26
- - - - -
10.10.2.26
- - - - - - - - 64542 - OCPSCH0104001MS - - - - 64543 - OCPSCH0104002MS - - - @@ -72,18 +23,7 @@ OCPSCH01040GGLF - - - - Ethernet0 - 10.10.1.25/30 - - - - Ethernet4 - 10.10.2.25/30 - - + @@ -91,24 +31,7 @@ - - - 40000 - DeviceInterfaceLink - OCPSCH0104001MS - Ethernet24 - OCPSCH01040GGLF - Ethernet0 - - - 40000 - DeviceInterfaceLink - OCPSCH0104002MS - Ethernet24 - OCPSCH01040GGLF - Ethernet4 - - + OCPSCH01040GGLF @@ -136,11 +59,6 @@ - - ErspanDestinationIpv4 - - 2.2.2.2 - diff --git a/platform/nephos/sonic-platform-modules-accton/as7116-54x/modules/x86-64-accton-as7116-54x-fan.c b/platform/nephos/sonic-platform-modules-accton/as7116-54x/modules/x86-64-accton-as7116-54x-fan.c index 4fd1b91e26dc..f5159c8f166e 100644 --- a/platform/nephos/sonic-platform-modules-accton/as7116-54x/modules/x86-64-accton-as7116-54x-fan.c +++ b/platform/nephos/sonic-platform-modules-accton/as7116-54x/modules/x86-64-accton-as7116-54x-fan.c @@ -109,7 +109,17 @@ enum sysfs_fan_attributes { FAN2_REAR_FAULT, FAN3_REAR_FAULT, FAN4_REAR_FAULT, - FAN5_REAR_FAULT + FAN5_REAR_FAULT, + FAN1_INPUT, /* FAN1_FRONT_SPEED_RPM, */ + FAN2_INPUT, /* FAN2_FRONT_SPEED_RPM, */ + FAN3_INPUT, /* FAN3_FRONT_SPEED_RPM, */ + FAN4_INPUT, /* FAN4_FRONT_SPEED_RPM, */ + FAN5_INPUT, /* FAN5_FRONT_SPEED_RPM, */ + FAN6_INPUT, /* FAN1_REAR_SPEED_RPM, */ + FAN7_INPUT, /* FAN2_REAR_SPEED_RPM, */ + FAN8_INPUT, /* FAN3_REAR_SPEED_RPM, */ + FAN9_INPUT, /* FAN4_REAR_SPEED_RPM, */ + FAN10_INPUT, /* FAN5_REAR_SPEED_RPM */ }; /* Define attributes @@ -138,6 +148,10 @@ enum sysfs_fan_attributes { #define DECLARE_FAN_SPEED_RPM_ATTR(index) &sensor_dev_attr_fan##index##_front_speed_rpm.dev_attr.attr, \ &sensor_dev_attr_fan##index##_rear_speed_rpm.dev_attr.attr +#define DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_INPUT) +#define DECLARE_FAN_INPUT_ATTR(index) &sensor_dev_attr_fan##index##_input.dev_attr.attr + /* 6 fan fault attributes in this platform */ DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(1); DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(2); @@ -165,6 +179,19 @@ DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(5); /* 1 fan duty cycle attribute in this platform */ DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(); +/* fan input attributes in this platform */ +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(1); +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(2); +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(3); +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(4); +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(5); + +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(6); +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(7); +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(8); +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(9); +DECLARE_FAN_INPUT_SENSOR_DEV_ATTR(10); + static struct attribute *as7116_54x_fan_attributes[] = { /* fan related attributes */ DECLARE_FAN_FAULT_ATTR(1), @@ -188,6 +215,16 @@ static struct attribute *as7116_54x_fan_attributes[] = { DECLARE_FAN_DIRECTION_ATTR(4), DECLARE_FAN_DIRECTION_ATTR(5), DECLARE_FAN_DUTY_CYCLE_ATTR(), + DECLARE_FAN_INPUT_ATTR(1), + DECLARE_FAN_INPUT_ATTR(2), + DECLARE_FAN_INPUT_ATTR(3), + DECLARE_FAN_INPUT_ATTR(4), + DECLARE_FAN_INPUT_ATTR(5), + DECLARE_FAN_INPUT_ATTR(6), + DECLARE_FAN_INPUT_ATTR(7), + DECLARE_FAN_INPUT_ATTR(8), + DECLARE_FAN_INPUT_ATTR(9), + DECLARE_FAN_INPUT_ATTR(10), NULL }; @@ -340,6 +377,19 @@ static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, reg_val_to_direction(data->reg_val[FAN_DIRECTION_REG], attr->index - FAN1_DIRECTION)); break; + case FAN1_INPUT: + case FAN2_INPUT: + case FAN3_INPUT: + case FAN4_INPUT: + case FAN5_INPUT: + case FAN6_INPUT: + case FAN7_INPUT: + case FAN8_INPUT: + case FAN9_INPUT: + case FAN10_INPUT: + ret = sprintf(buf, "%u\n", reg_val_to_speed_rpm(data->reg_val[attr->index + - FAN1_INPUT + FAN1_FRONT_SPEED_RPM])); + break; default: break; } diff --git a/platform/nephos/sonic-platform-modules-accton/as7116-54x/utils/accton_as7116_util.py b/platform/nephos/sonic-platform-modules-accton/as7116-54x/utils/accton_as7116_util.py index 17c56f7beb53..26a8a3cc8f84 100755 --- a/platform/nephos/sonic-platform-modules-accton/as7116-54x/utils/accton_as7116_util.py +++ b/platform/nephos/sonic-platform-modules-accton/as7116-54x/utils/accton_as7116_util.py @@ -251,7 +251,15 @@ def device_install(): if status: print output if FORCE == 0: - return status + return status + + if i <= 47: + status, output =log_os_system("echo as7116_54x_sfp"+str(i+1)+" 0x51 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + return def device_uninstall(): From b7eeba8b917ad2e7baa81dd0d347945c0118706a Mon Sep 17 00:00:00 2001 From: Rodny Molina Date: Tue, 7 Aug 2018 09:03:35 -0700 Subject: [PATCH 051/180] Moving get_routing_stack() to a centralized location to avoid code dups (#1714) * Moving get_routing_stack() to a centralized location to avoid code duplication Various areas of sonic-utilities are now demanding this functionality so i'm simply moving this routing to a centralized location. After spending some time debating about the ideal location for this function, we thought about sonic-config-engine/sonic_platform.py as the closest match. Functional tests' output will be provided as part of the equivalent PR to be submitted shortly within sonic-utilities repo. * Adding comment to function. --- src/sonic-config-engine/sonic_platform.py | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/src/sonic-config-engine/sonic_platform.py b/src/sonic-config-engine/sonic_platform.py index 55ad2325f5db..20890d765cab 100644 --- a/src/sonic-config-engine/sonic_platform.py +++ b/src/sonic-config-engine/sonic_platform.py @@ -54,7 +54,7 @@ def get_system_mac(): return None mac = mac.strip() - + # Align last byte of MAC if necessary if version_info and (version_info['asic_type'] == 'mellanox' or version_info['asic_type'] == 'centec'): last_byte = mac[-2:] @@ -62,3 +62,24 @@ def get_system_mac(): mac = mac[:-2] + aligned_last_byte return mac +# +# Function to obtain the routing-stack being utilized. Function is not +# platform-specific; it's being placed in this file temporarily till a more +# suitable location is identified as part of upcoming refactoring efforts. +# +def get_system_routing_stack(): + command = "sudo docker ps | grep bgp | awk '{print$2}' | cut -d'-' -f3 | cut -d':' -f1" + + try: + proc = subprocess.Popen(command, + stdout=subprocess.PIPE, + shell=True, + stderr=subprocess.STDOUT) + stdout = proc.communicate()[0] + proc.wait() + result = stdout.rstrip('\n') + + except OSError, e: + raise OSError("Cannot detect routing-stack") + + return result From 314eae5c9e829f1d74f62e45ca290fb06fb4fb86 Mon Sep 17 00:00:00 2001 From: Taoyu Li Date: Tue, 7 Aug 2018 14:36:54 -0700 Subject: [PATCH 052/180] [minigraph.py] Support parsing console ports (#1898) --- src/sonic-config-engine/minigraph.py | 30 +++++++++++++++++-- .../tests/simple-sample-graph-case.xml | 9 ++++++ .../tests/test_minigraph_case.py | 5 ++++ 3 files changed, 41 insertions(+), 3 deletions(-) diff --git a/src/sonic-config-engine/minigraph.py b/src/sonic-config-engine/minigraph.py index 1ad76b0b37d9..19a4b0ceba7a 100644 --- a/src/sonic-config-engine/minigraph.py +++ b/src/sonic-config-engine/minigraph.py @@ -66,10 +66,32 @@ def parse_png(png, hname): mgmt_dev = '' mgmt_port = '' port_speeds = {} + console_ports = {} for child in png: if child.tag == str(QName(ns, "DeviceInterfaceLinks")): for link in child.findall(str(QName(ns, "DeviceLinkBase"))): linktype = link.find(str(QName(ns, "ElementType"))).text + if linktype == "DeviceSerialLink": + enddevice = link.find(str(QName(ns, "EndDevice"))).text + endport = link.find(str(QName(ns, "EndPort"))).text + startdevice = link.find(str(QName(ns, "StartDevice"))).text + startport = link.find(str(QName(ns, "StartPort"))).text + baudrate = link.find(str(QName(ns, "Bandwidth"))).text + flowcontrol = 1 if link.find(str(QName(ns, "FlowControl"))) is not None and link.find(str(QName(ns, "FlowControl"))).text == 'true' else 0 + if enddevice.lower() == hname.lower(): + console_ports[endport] = { + 'remote_device': startdevice, + 'baud_rate': baudrate, + 'flow_control': flowcontrol + } + else: + console_ports[startport] = { + 'remote_device': enddevice, + 'baud_rate': baudrate, + 'flow_control': flowcontrol + } + continue + if linktype != "DeviceInterfaceLink" and linktype != "UnderlayInterfaceLink": continue @@ -118,7 +140,7 @@ def parse_png(png, hname): elif node.tag == str(QName(ns, "EndDevice")): mgmt_dev = node.text - return (neighbors, devices, console_dev, console_port, mgmt_dev, mgmt_port, port_speeds) + return (neighbors, devices, console_dev, console_port, mgmt_dev, mgmt_port, port_speeds, console_ports) def parse_dpg(dpg, hname): @@ -399,6 +421,7 @@ def parse_xml(filename, platform=None, port_config_file=None): port_speeds_default = {} port_speed_png = {} port_descriptions = {} + console_ports = {} syslog_servers = [] dhcp_servers = [] ntp_servers = [] @@ -424,9 +447,9 @@ def parse_xml(filename, platform=None, port_config_file=None): elif child.tag == str(QName(ns, "CpgDec")): (bgp_sessions, bgp_asn, bgp_peers_with_range) = parse_cpg(child, hostname) elif child.tag == str(QName(ns, "PngDec")): - (neighbors, devices, console_dev, console_port, mgmt_dev, mgmt_port, port_speed_png) = parse_png(child, hostname) + (neighbors, devices, console_dev, console_port, mgmt_dev, mgmt_port, port_speed_png, console_ports) = parse_png(child, hostname) elif child.tag == str(QName(ns, "UngDec")): - (u_neighbors, u_devices, _, _, _, _, _) = parse_png(child, hostname) + (u_neighbors, u_devices, _, _, _, _, _, _) = parse_png(child, hostname) elif child.tag == str(QName(ns, "MetadataDeclaration")): (syslog_servers, dhcp_servers, ntp_servers, tacacs_servers, mgmt_routes, erspan_dst, deployment_id) = parse_meta(child, hostname) elif child.tag == str(QName(ns, "DeviceInfos")): @@ -494,6 +517,7 @@ def parse_xml(filename, platform=None, port_config_file=None): ports.setdefault(port_name, {})['description'] = port_descriptions[port_name] results['PORT'] = ports + results['CONSOLE_PORT'] = console_ports if port_config_file: port_set = set(ports.keys()) diff --git a/src/sonic-config-engine/tests/simple-sample-graph-case.xml b/src/sonic-config-engine/tests/simple-sample-graph-case.xml index 722d50f5ecd6..5a776099017d 100644 --- a/src/sonic-config-engine/tests/simple-sample-graph-case.xml +++ b/src/sonic-config-engine/tests/simple-sample-graph-case.xml @@ -182,6 +182,15 @@ + + DeviceSerialLink + 9600 + switch-t0 + 1 + true + managed_device + console + DeviceInterfaceLink true diff --git a/src/sonic-config-engine/tests/test_minigraph_case.py b/src/sonic-config-engine/tests/test_minigraph_case.py index 4ceccb32a686..85110f56f7b9 100644 --- a/src/sonic-config-engine/tests/test_minigraph_case.py +++ b/src/sonic-config-engine/tests/test_minigraph_case.py @@ -89,6 +89,11 @@ def test_minigraph_portchannels(self): output = self.run_script(argument) self.assertEqual(output.strip(), "{'PortChannel01': {'members': ['Ethernet4']}}") + def test_minigraph_console_port(self): + argument = '-m "' + self.sample_graph + '" -p "' + self.port_config + '" -v CONSOLE_PORT' + output = self.run_script(argument) + self.assertEqual(output.strip(), "{'1': {'baud_rate': '9600', 'remote_device': 'managed_device', 'flow_control': 1}}") + def test_minigraph_deployment_id(self): argument = '-m "' + self.sample_graph + '" -p "' + self.port_config + '" -v "DEVICE_METADATA[\'localhost\'][\'deployment_id\']"' output = self.run_script(argument) From 4d784d82ce3197762a97859df2c7a2a7580f136c Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Wed, 8 Aug 2018 18:29:17 -0700 Subject: [PATCH 053/180] Upgrade azure-keyvault to known compatible version (#1906) * Upgrade azure-keyvault to known compatible version * (fix typo) --- dockers/docker-sonic-mgmt/Dockerfile.j2 | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/dockers/docker-sonic-mgmt/Dockerfile.j2 b/dockers/docker-sonic-mgmt/Dockerfile.j2 index cd2fd5ff37dd..2feac5403539 100644 --- a/dockers/docker-sonic-mgmt/Dockerfile.j2 +++ b/dockers/docker-sonic-mgmt/Dockerfile.j2 @@ -101,6 +101,7 @@ RUN azure-cli_bundle_*/installer # Known bug: azure keyvault cannot work behind a proxy # Temporary fix: upgrade the azure-keyvault package within az cli -RUN ~/lib/azure-cli/bin/python -m pip install azure-keyvault -U +# TODO: if azure-cli contains newer version azure-keyvault, remove this +RUN ~/lib/azure-cli/bin/python -m pip install azure-keyvault==0.3.7 -U RUN git clone https://github.com/Azure/sonic-mgmt From 7aefa185d4774cf5d1794a3e3add7962a2b91213 Mon Sep 17 00:00:00 2001 From: Joe LeVeque Date: Thu, 9 Aug 2018 23:56:41 -0700 Subject: [PATCH 054/180] Download newer version (8.23.0-2) of rsyslog from jessie-backports in hopes of eliminating memory leaks (#1912) --- build_debian.sh | 5 ++++- dockers/docker-base/Dockerfile.j2 | 5 ++++- dockers/docker-base/sources.list | 1 + files/apt/sources.list | 1 + .../debian_archive_trafficmanager_net_debian.list | 1 + sonic-slave/Dockerfile | 2 +- 6 files changed, 12 insertions(+), 3 deletions(-) diff --git a/build_debian.sh b/build_debian.sh index 767dd7b83b79..993687534787 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -200,7 +200,6 @@ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y in openssh-server \ python \ python-setuptools \ - rsyslog \ monit \ python-apt \ traceroute \ @@ -228,6 +227,10 @@ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y in tcptraceroute \ mtr-tiny +# Install a newer version of rsyslog from jessie-backports in hopes of +# eliminating memory leaks +sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y -t jessie-backports install rsyslog + sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y download \ grub-pc-bin diff --git a/dockers/docker-base/Dockerfile.j2 b/dockers/docker-base/Dockerfile.j2 index 98f8237cee57..bd5c91faa9db 100644 --- a/dockers/docker-base/Dockerfile.j2 +++ b/dockers/docker-base/Dockerfile.j2 @@ -25,12 +25,15 @@ RUN apt-get update # Pre-install fundamental packages RUN apt-get -y install \ - rsyslog \ vim-tiny \ perl \ python \ less +# Install a newer version of rsyslog from jessie-backports in hopes of +# eliminating memory leaks +RUN apt-get -y -t jessie-backports install rsyslog + # Pre-install troubleshooting packages RUN apt-get -y install socat diff --git a/dockers/docker-base/sources.list b/dockers/docker-base/sources.list index 2ed195cff416..7121d6fd8c2d 100644 --- a/dockers/docker-base/sources.list +++ b/dockers/docker-base/sources.list @@ -5,3 +5,4 @@ deb http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-fre deb-src http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free deb http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free deb-src http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free +deb http://debian-archive.trafficmanager.net/debian/ jessie-backports main contrib non-free diff --git a/files/apt/sources.list b/files/apt/sources.list index 2ed195cff416..7121d6fd8c2d 100644 --- a/files/apt/sources.list +++ b/files/apt/sources.list @@ -5,3 +5,4 @@ deb http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-fre deb-src http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free deb http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free deb-src http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free +deb http://debian-archive.trafficmanager.net/debian/ jessie-backports main contrib non-free diff --git a/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list b/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list index d5ecf56d4069..4daa3ccba677 100644 --- a/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list +++ b/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list @@ -1,2 +1,3 @@ deb http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free deb http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free +deb http://debian-archive.trafficmanager.net/debian/ jessie-backports main contrib non-free diff --git a/sonic-slave/Dockerfile b/sonic-slave/Dockerfile index f66b3e07d7b0..768d1c73e89e 100644 --- a/sonic-slave/Dockerfile +++ b/sonic-slave/Dockerfile @@ -6,7 +6,7 @@ RUN echo "deb http://debian-archive.trafficmanager.net/debian/ jessie main contr echo "deb-src http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free" >> /etc/apt/sources.list && \ echo "deb http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free" >> /etc/apt/sources.list && \ echo "deb-src http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free" >> /etc/apt/sources.list && \ - echo 'deb http://debian-archive.trafficmanager.net/debian jessie-backports main' >> /etc/apt/sources.list + echo "deb http://debian-archive.trafficmanager.net/debian/ jessie-backports main contrib non-free" >> /etc/apt/sources.list ## Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive From 3c3c19e600e05a775ca72eaea0f92b3cd7dea65d Mon Sep 17 00:00:00 2001 From: zhenggen-xu Date: Thu, 9 Aug 2018 23:58:30 -0700 Subject: [PATCH 055/180] [lldp]: LLDP is misbehaving if netlink messages were lost due to timing issue. (#1909) The behavior could be that we are sending LLDP message but not using lldpcli configured properties if netlink delete messages were lost. It also could be that some interfaces do not sending messages at all. "lldpcli show statistics" could see duplicated or missing interfaces. Changes: Upgrade lldpd to 0.9.6 (which introduced the adjustable netlink buffer size) Change the netlink receive buffer size to 1MB --- rules/lldpd.mk | 2 +- src/lldpd/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/rules/lldpd.mk b/rules/lldpd.mk index 10f3a200fc94..0e0d13721f83 100644 --- a/rules/lldpd.mk +++ b/rules/lldpd.mk @@ -1,6 +1,6 @@ # lldpd package -LLDPD_VERSION = 0.9.5 +LLDPD_VERSION = 0.9.6 LLDPD = lldpd_$(LLDPD_VERSION)-0_amd64.deb $(LLDPD)_DEPENDS += $(LIBSNMP_DEV) diff --git a/src/lldpd/Makefile b/src/lldpd/Makefile index c34062505d4e..5f502b86863c 100644 --- a/src/lldpd/Makefile +++ b/src/lldpd/Makefile @@ -23,7 +23,7 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : stg import -s ../patch/series # Build source and Debian packages - dpkg-buildpackage -rfakeroot -b -us -uc -j$(SONIC_CONFIG_MAKE_JOBS) + env "with_netlink_receive_bufsize=1024*1024" dpkg-buildpackage -rfakeroot -b -us -uc -j$(SONIC_CONFIG_MAKE_JOBS) popd # Move the newly-built .deb packages to the destination directory From 36e9ad510db55ac25eea8d8c7acf81a2a6cd1a71 Mon Sep 17 00:00:00 2001 From: simonJi2018 <37395146+simonJi2018@users.noreply.github.com> Date: Fri, 10 Aug 2018 14:59:16 +0800 Subject: [PATCH 056/180] [devices]: update submodule platform/nephos/sonic-platform-modules-ingrasys from 7181a0 to 796169 (#1910) * Upgrade SAI to v1.2.4 * Add a new supported device accton as7116 * Add maintainer info for deb * Add mk file for accton 7116 * fix some bug for sai 1.2.4 * fix git commit error for sdk and sai * change sai and sdk deb name * add config file for qos support * initial commit * Delete qos.json * Delete buffers.json.j2 * Delete qos.json * Delete buffers.json.j2 * Delete buffers.json.j2 * Delete qos.json * add support for sai 1.3.0 * add qos and buffer file for device and add sensor driver for 7116 * change buffer template * fix fan led bug --- platform/nephos/sonic-platform-modules-ingrasys | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platform/nephos/sonic-platform-modules-ingrasys b/platform/nephos/sonic-platform-modules-ingrasys index 7181a00e42c2..796169e43aee 160000 --- a/platform/nephos/sonic-platform-modules-ingrasys +++ b/platform/nephos/sonic-platform-modules-ingrasys @@ -1 +1 @@ -Subproject commit 7181a00e42c292472e1327b9890bdcfac810e407 +Subproject commit 796169e43aee944fdf7b549d04cb181117e0fb89 From ae843186a56238dab46188608fd1c6eb96f012da Mon Sep 17 00:00:00 2001 From: Andriy Moroz Date: Sat, 11 Aug 2018 01:37:16 +0300 Subject: [PATCH 057/180] [Mellanox] Update hw-management service config (#1914) Signed-off-by: Andriy Moroz --- .../mellanox/hw-management/Add-systemd-service-config.patch | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/platform/mellanox/hw-management/Add-systemd-service-config.patch b/platform/mellanox/hw-management/Add-systemd-service-config.patch index 4903f508bce6..bbaed885dcb3 100644 --- a/platform/mellanox/hw-management/Add-systemd-service-config.patch +++ b/platform/mellanox/hw-management/Add-systemd-service-config.patch @@ -29,7 +29,7 @@ new file mode 100644 index 0000000..d18916d --- /dev/null +++ b/debian/hw-management.service -@@ -0,0 +1,10 @@ +@@ -0,0 +1,11 @@ +[Unit] +Description=Mellanox Hardware Management + @@ -37,6 +37,7 @@ index 0000000..d18916d +Type=oneshot +EnvironmentFile=/host/machine.conf +ExecStart=/bin/bash -c "/usr/share/sonic/device/$onie_platform/hw-management start" ++ExecStop=/bin/bash -c "/usr/share/sonic/device/$onie_platform/hw-management stop" + +[Install] +WantedBy=multi-user.target From 9e2ceb7cba6b69349057e0d611dfa3543559f39d Mon Sep 17 00:00:00 2001 From: Joe LeVeque Date: Fri, 10 Aug 2018 21:56:15 -0700 Subject: [PATCH 058/180] [sonic-platform-common] Update submodule (#1915) --- src/sonic-platform-common | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-platform-common b/src/sonic-platform-common index d98600e8ed8d..664d6cc37b14 160000 --- a/src/sonic-platform-common +++ b/src/sonic-platform-common @@ -1 +1 @@ -Subproject commit d98600e8ed8df0280cb07487132e20adc48d7f6e +Subproject commit 664d6cc37b1404ce076bf1addb62e55f93240258 From 4d701ad0374a828507a7d6ab181f6266ac37a799 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Tue, 5 Sep 2017 09:07:05 +0000 Subject: [PATCH 059/180] [baseimage]: update base image from jessie to stretch --- build_debian.sh | 4 ++-- files/apt/sources.list | 9 ++++----- .../debian_archive_trafficmanager_net_debian.list | 5 ++--- 3 files changed, 8 insertions(+), 10 deletions(-) diff --git a/build_debian.sh b/build_debian.sh index 993687534787..90d218ce9986 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -29,7 +29,7 @@ set -x -e ## docker engine version (with platform) -DOCKER_VERSION=1.11.1-0~jessie_amd64 +DOCKER_VERSION=1.11.1-0~stretch_amd64 ## Working directory to prepare the file system FILESYSTEM_ROOT=./fsroot @@ -64,7 +64,7 @@ touch $FILESYSTEM_ROOT/$PLATFORM_DIR/firsttime ## Build a basic Debian system by debootstrap echo '[INFO] Debootstrap...' -sudo http_proxy=$http_proxy debootstrap --variant=minbase --arch amd64 jessie $FILESYSTEM_ROOT http://debian-archive.trafficmanager.net/debian +sudo http_proxy=$http_proxy debootstrap --variant=minbase --arch amd64 stretch $FILESYSTEM_ROOT http://debian-archive.trafficmanager.net/debian ## Config hostname and hosts, otherwise 'sudo ...' will complain 'sudo: unable to resolve host ...' sudo LANG=C chroot $FILESYSTEM_ROOT /bin/bash -c "echo '$HOSTNAME' > /etc/hostname" diff --git a/files/apt/sources.list b/files/apt/sources.list index 7121d6fd8c2d..bbcbbe64f691 100644 --- a/files/apt/sources.list +++ b/files/apt/sources.list @@ -1,8 +1,7 @@ ## Debian mirror on Microsoft Azure ## Ref: http://debian-archive.trafficmanager.net/ -deb http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free -deb-src http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free -deb http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free -deb-src http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free -deb http://debian-archive.trafficmanager.net/debian/ jessie-backports main contrib non-free +deb http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free +deb-src http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free +deb http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free +deb-src http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free diff --git a/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list b/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list index 4daa3ccba677..1ddb193b1034 100644 --- a/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list +++ b/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list @@ -1,3 +1,2 @@ -deb http://debian-archive.trafficmanager.net/debian/ jessie main contrib non-free -deb http://debian-archive.trafficmanager.net/debian-security/ jessie/updates main contrib non-free -deb http://debian-archive.trafficmanager.net/debian/ jessie-backports main contrib non-free +deb http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free +deb http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free From ff1f508f33aa95836f5a098db12b0a8728eef1cb Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Fri, 1 Sep 2017 07:35:36 +0000 Subject: [PATCH 060/180] [baseimage]: use debian 4.9.0-3 kernel --- .gitmodules | 3 ++- build_debian.sh | 5 +++-- installer/x86_64/install.sh | 4 ++-- rules/linux-kernel.mk | 8 ++++---- slave.mk | 2 ++ src/igb/Makefile | 2 +- 6 files changed, 14 insertions(+), 10 deletions(-) diff --git a/.gitmodules b/.gitmodules index b36e0f3e8865..ffde4484d85c 100755 --- a/.gitmodules +++ b/.gitmodules @@ -3,7 +3,8 @@ url = https://github.com/Azure/sonic-swss-common [submodule "sonic-linux-kernel"] path = src/sonic-linux-kernel - url = https://github.com/Azure/sonic-linux-kernel + url = https://github.com/lguohan/sonic-linux-kernel + branch = stretch [submodule "sonic-sairedis"] path = src/sonic-sairedis url = https://github.com/Azure/sonic-sairedis diff --git a/build_debian.sh b/build_debian.sh index 90d218ce9986..ef367b4125a5 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -30,6 +30,7 @@ set -x -e ## docker engine version (with platform) DOCKER_VERSION=1.11.1-0~stretch_amd64 +LINUX_KERNEL_VERSION=4.9.0-3 ## Working directory to prepare the file system FILESYSTEM_ROOT=./fsroot @@ -110,7 +111,7 @@ echo '[INFO] Install SONiC linux kernel image' ## Note: duplicate apt-get command to ensure every line return zero sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/initramfs-tools_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f -sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/linux-image-3.16.0-5-amd64_*.deb || \ +sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/linux-image-${LINUX_KERNEL_VERSION}-amd64_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f ## Update initramfs for booting with squashfs+aufs @@ -148,7 +149,7 @@ sudo chmod +x $FILESYSTEM_ROOT/etc/initramfs-tools/hooks/union-fsck sudo chroot $FILESYSTEM_ROOT update-initramfs -u ## Install latest intel igb driver -sudo cp target/debs/igb.ko $FILESYSTEM_ROOT/lib/modules/3.16.0-5-amd64/kernel/drivers/net/ethernet/intel/igb/igb.ko +sudo cp target/debs/igb.ko $FILESYSTEM_ROOT/lib/modules/${LINUX_KERNEL_VERSION}-amd64/kernel/drivers/net/ethernet/intel/igb/igb.ko ## Install latest intel ixgbe driver sudo cp target/debs/ixgbe.ko $FILESYSTEM_ROOT/lib/modules/3.16.0-5-amd64/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.ko diff --git a/installer/x86_64/install.sh b/installer/x86_64/install.sh index 91dd57a74ba1..e40dfbd31642 100755 --- a/installer/x86_64/install.sh +++ b/installer/x86_64/install.sh @@ -570,11 +570,11 @@ menuentry '$demo_grub_entry' { if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi insmod part_msdos insmod ext2 - linux /$image_dir/boot/vmlinuz-3.16.0-5-amd64 root=$grub_cfg_root rw $GRUB_CMDLINE_LINUX \ + linux /$image_dir/boot/vmlinuz-4.9.0-3-amd64 root=$grub_cfg_root rw $GRUB_CMDLINE_LINUX \ loop=$image_dir/$FILESYSTEM_SQUASHFS loopfstype=squashfs \ apparmor=1 security=apparmor varlog_size=$VAR_LOG_SIZE usbcore.autosuspend=-1 $ONIE_PLATFORM_EXTRA_CMDLINE_LINUX echo 'Loading $demo_volume_label $demo_type initial ramdisk ...' - initrd /$image_dir/boot/initrd.img-3.16.0-5-amd64 + initrd /$image_dir/boot/initrd.img-4.9.0-3-amd64 } EOF diff --git a/rules/linux-kernel.mk b/rules/linux-kernel.mk index b7c1263990f5..c7eea31354bb 100644 --- a/rules/linux-kernel.mk +++ b/rules/linux-kernel.mk @@ -1,9 +1,9 @@ # linux kernel package -KVERSION_SHORT = 3.16.0-5 -KVERSION ?= $(KVERSION_SHORT)-amd64 -KERNEL_VERSION = 3.16.51 -KERNEL_SUBVERSION = 3+deb8u1 +KVERSION_SHORT = 4.9.0-3 +KVERSION = $(KVERSION_SHORT)-amd64 +KERNEL_VERSION = 4.9.30 +KERNEL_SUBVERSION = 2+deb9u5 export KVERSION_SHORT KVERSION KERNEL_VERSION KERNEL_SUBVERSION diff --git a/slave.mk b/slave.mk index 722698b5c7cb..d21670d241b5 100644 --- a/slave.mk +++ b/slave.mk @@ -447,6 +447,8 @@ $(DOCKER_LOAD_TARGETS) : $(TARGET_PATH)/%.gz-load : .platform docker-start $$(TA $(addprefix $(TARGET_PATH)/, $(SONIC_INSTALLERS)) : $(TARGET_PATH)/% : \ .platform \ onie-image.conf \ + build_debian.sh \ + build_image.sh \ $$(addsuffix -install,$$(addprefix $(DEBS_PATH)/,$$($$*_DEPENDS))) \ $$(addprefix $(DEBS_PATH)/,$$($$*_INSTALLS)) \ $$(addprefix $(DEBS_PATH)/,$$($$*_LAZY_INSTALLS)) \ diff --git a/src/igb/Makefile b/src/igb/Makefile index cafa96aba772..8fefa2ed2ae5 100644 --- a/src/igb/Makefile +++ b/src/igb/Makefile @@ -15,7 +15,7 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # Build the package pushd src - export BUILD_KERNEL=$(KVERSION) + export BUILD_KERNEL=4.9.0-3-amd64 make popd From b6af83ccf8da6af3b27160069e603c3e0d85af8f Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Fri, 1 Sep 2017 08:53:21 +0000 Subject: [PATCH 061/180] [baseimage]: upgrade initramfs to 0.130 --- build_debian.sh | 2 ++ rules/initramfs-tools.mk | 2 +- src/initramfs-tools/Makefile | 7 +++++-- 3 files changed, 8 insertions(+), 3 deletions(-) diff --git a/build_debian.sh b/build_debian.sh index ef367b4125a5..bd5a363761ec 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -109,6 +109,8 @@ sudo LANG=C chroot $FILESYSTEM_ROOT /bin/bash -c 'cd /dev && MAKEDEV generic' sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install busybox echo '[INFO] Install SONiC linux kernel image' ## Note: duplicate apt-get command to ensure every line return zero +sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/initramfs-tools-core_*.deb || \ + sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/initramfs-tools_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/linux-image-${LINUX_KERNEL_VERSION}-amd64_*.deb || \ diff --git a/rules/initramfs-tools.mk b/rules/initramfs-tools.mk index ef06c1056d41..9fbeb249a6b0 100644 --- a/rules/initramfs-tools.mk +++ b/rules/initramfs-tools.mk @@ -1,6 +1,6 @@ # initramfs-tools package -INITRAMFS_TOOLS_VERSION = 0.120 +INITRAMFS_TOOLS_VERSION = 0.130 export INITRAMFS_TOOLS_VERSION INITRAMFS_TOOLS = initramfs-tools_$(INITRAMFS_TOOLS_VERSION)_all.deb diff --git a/src/initramfs-tools/Makefile b/src/initramfs-tools/Makefile index c5010e876d8b..c92d1b54838a 100644 --- a/src/initramfs-tools/Makefile +++ b/src/initramfs-tools/Makefile @@ -3,11 +3,12 @@ SHELL = /bin/bash .SHELLFLAGS += -e MAIN_TARGET = initramfs-tools_$(INITRAMFS_TOOLS_VERSION)_all.deb +DERIVED_TARGETS = initramfs-tools-core_$(INITRAMFS_TOOLS_VERSION)_all.deb $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # Obtaining the initramfs-tools rm -rf ./initramfs-tools - git clone --branch v0.120 https://salsa.debian.org/kernel-team/initramfs-tools.git ./initramfs-tools + git clone --branch v0.130 https://salsa.debian.org/kernel-team/initramfs-tools.git ./initramfs-tools # Patch pushd ./initramfs-tools @@ -18,4 +19,6 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : dpkg-buildpackage -rfakeroot -b -us -uc -j$(SONIC_CONFIG_MAKE_JOBS) popd - mv $* $(DEST)/ + mv $(DERIVED_TARGETS) $* $(DEST)/ + +$(addprefix $(DEST)/, $(DERIVED_TARGETS)): $(DEST)/% : $(DEST)/$(MAIN_TARGET) From 72d70e98bea2077895d2677818d49293bcb5676d Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 2 Sep 2017 22:29:21 +0000 Subject: [PATCH 062/180] [baseimage]: install systemd-sysv in the base image --- build_debian.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/build_debian.sh b/build_debian.sh index bd5a363761ec..969ff9f0726b 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -95,7 +95,7 @@ sudo LANG=C chroot $FILESYSTEM_ROOT bash -c 'apt-mark auto `apt-mark showmanual` sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y update sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y upgrade echo '[INFO] Install packages for building image' -sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install makedev psmisc +sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install makedev psmisc systemd-sysv ## Create device files echo '[INFO] MAKEDEV' From f64ffe85717f952877876cb0dea889237a03f22b Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 2 Sep 2017 22:32:31 +0000 Subject: [PATCH 063/180] [baseimage]: build root filesystem via overlay fs instead of aufs --- build_debian.sh | 5 +++-- files/initramfs-tools/modules | 2 +- files/initramfs-tools/udev.patch | 10 ++++++++++ files/initramfs-tools/union-mount.j2 | 9 +++++---- 4 files changed, 19 insertions(+), 7 deletions(-) create mode 100644 files/initramfs-tools/udev.patch diff --git a/build_debian.sh b/build_debian.sh index 969ff9f0726b..c5c1d23050eb 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -116,7 +116,7 @@ sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/initramfs-tools_*.deb || \ sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/linux-image-${LINUX_KERNEL_VERSION}-amd64_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f -## Update initramfs for booting with squashfs+aufs +## Update initramfs for booting with squashfs+overlay cat files/initramfs-tools/modules | sudo tee -a $FILESYSTEM_ROOT/etc/initramfs-tools/modules > /dev/null ## Hook into initramfs: change fs type from vfat to ext4 on arista switches @@ -148,6 +148,7 @@ sudo cp files/initramfs-tools/mgmt-intf-dhcp $FILESYSTEM_ROOT/etc/initramfs-tool sudo chmod +x $FILESYSTEM_ROOT/etc/initramfs-tools/scripts/init-bottom/mgmt-intf-dhcp sudo cp files/initramfs-tools/union-fsck $FILESYSTEM_ROOT/etc/initramfs-tools/hooks/union-fsck sudo chmod +x $FILESYSTEM_ROOT/etc/initramfs-tools/hooks/union-fsck +pushd $FILESYSTEM_ROOT/usr/share/initramfs-tools/scripts/init-bottom && sudo patch -p1 < $OLDPWD/files/initramfs-tools/udev.patch; popd sudo chroot $FILESYSTEM_ROOT update-initramfs -u ## Install latest intel igb driver @@ -273,7 +274,7 @@ sudo sed -i ' ' $FILESYSTEM_ROOT/etc/monit/monitrc sudo tee -a $FILESYSTEM_ROOT/etc/monit/monitrc > /dev/null <<'EOF' -check filesystem root-aufs with path / +check filesystem root-overlay with path / if space usage > 90% for 5 times within 10 cycles then alert check filesystem var-log with path /var/log if space usage > 90% for 5 times within 10 cycles then alert diff --git a/files/initramfs-tools/modules b/files/initramfs-tools/modules index 1bd0eab15996..33f28b98b3f7 100644 --- a/files/initramfs-tools/modules +++ b/files/initramfs-tools/modules @@ -1,5 +1,5 @@ squashfs -aufs +overlay vfat nls_cp437 nls_utf8 diff --git a/files/initramfs-tools/udev.patch b/files/initramfs-tools/udev.patch new file mode 100644 index 000000000000..38c43dc27d69 --- /dev/null +++ b/files/initramfs-tools/udev.patch @@ -0,0 +1,10 @@ +--- a/udev 2017-09-02 23:13:45.078773236 +0000 ++++ b/udev 2017-09-02 22:40:08.502773236 +0000 +@@ -1,6 +1,6 @@ + #!/bin/sh -e + +-PREREQS="" ++PREREQS="union-mount" + + prereqs() { echo "$PREREQS"; } + diff --git a/files/initramfs-tools/union-mount.j2 b/files/initramfs-tools/union-mount.j2 index db40d4f08601..6369b8449681 100644 --- a/files/initramfs-tools/union-mount.j2 +++ b/files/initramfs-tools/union-mount.j2 @@ -11,18 +11,19 @@ case $1 in ;; esac -## Mount the aufs file system: rw layer over squashfs +## Mount the overlay file system: rw layer over squashfs image_dir=$(cat /proc/cmdline | sed -e 's/.*loop=\(\S*\)\/.*/\1/') mkdir -p ${rootmnt}/host/$image_dir/rw -mount -n -o dirs=${rootmnt}/host/$image_dir/rw:${rootmnt}=ro -t aufs root-aufs ${rootmnt} +mkdir -p ${rootmnt}/host/$image_dir/work +mount -n -o lowerdir=${rootmnt},upperdir=${rootmnt}/host/$image_dir/rw,workdir=${rootmnt}/host/$image_dir/work -t overlay root-overlay ${rootmnt} ## Check if the root block device is still there [ -b ${ROOT} ] || mdev -s ## Mount the raw partition again mount ${ROOT} ${rootmnt}/host -## Mount the working directory of docker engine in the raw partition, bypass the aufs +## Mount the working directory of docker engine in the raw partition, bypass the overlay mkdir -p ${rootmnt}/var/lib/docker mount --bind ${rootmnt}/host/$image_dir/{{ DOCKERFS_DIR }} ${rootmnt}/var/lib/docker -## Mount the boot directory in the raw partition, bypass the aufs +## Mount the boot directory in the raw partition, bypass the overlay mkdir -p ${rootmnt}/boot mount --bind ${rootmnt}/host/$image_dir/boot ${rootmnt}/boot ## Mount loop device for /var/log From dabbe63f998646e8ddcddb1df17d161196510cca Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 3 Sep 2017 08:02:31 +0000 Subject: [PATCH 064/180] [baseimage]: Disable consistent network device naming consistent network device naming is enabled in debian 9 kernel by default --- installer/x86_64/install.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/installer/x86_64/install.sh b/installer/x86_64/install.sh index e40dfbd31642..eb7cab38609a 100755 --- a/installer/x86_64/install.sh +++ b/installer/x86_64/install.sh @@ -571,6 +571,7 @@ menuentry '$demo_grub_entry' { insmod part_msdos insmod ext2 linux /$image_dir/boot/vmlinuz-4.9.0-3-amd64 root=$grub_cfg_root rw $GRUB_CMDLINE_LINUX \ + net.ifnames=0 biosdevname=0 \ loop=$image_dir/$FILESYSTEM_SQUASHFS loopfstype=squashfs \ apparmor=1 security=apparmor varlog_size=$VAR_LOG_SIZE usbcore.autosuspend=-1 $ONIE_PLATFORM_EXTRA_CMDLINE_LINUX echo 'Loading $demo_volume_label $demo_type initial ramdisk ...' From b03e974bb3ee0da499430dc2834964ee096fe8fa Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Tue, 5 Sep 2017 05:57:12 +0000 Subject: [PATCH 065/180] [baseimage]: let docker in base image use overlay fs instead of aufs --- files/build_templates/sonic_debian_extension.j2 | 1 + files/docker/docker.service.conf | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index 02ac97ba2b9a..e57ac20528ca 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -42,6 +42,7 @@ clean_sys() { trap_push clean_sys sudo LANG=C chroot $FILESYSTEM_ROOT mount sysfs /sys -t sysfs +sudo bash -c "echo \"DOCKER_OPTS=\"--storage-driver=overlay\"\" >> $FILESYSTEM_ROOT/etc/default/docker" sudo chroot $FILESYSTEM_ROOT service docker start # Apply apt configuration files diff --git a/files/docker/docker.service.conf b/files/docker/docker.service.conf index fba63af8f5f6..b124d94f70d1 100644 --- a/files/docker/docker.service.conf +++ b/files/docker/docker.service.conf @@ -1,3 +1,3 @@ [Service] ExecStart= -ExecStart=/usr/bin/docker daemon -H fd:// --storage-driver=aufs --bip=240.127.1.1/24 --iptables=false +ExecStart=/usr/bin/docker daemon -H fd:// --storage-driver=overlay --bip=240.127.1.1/24 --iptables=false From 376cabe6bf3b959c7b1bc6e02fcd4d07188cae9a Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 3 Sep 2017 09:11:31 +0000 Subject: [PATCH 066/180] [baseimage]: update igb driver to 5.3.5.10 --- rules/igb.mk | 2 +- src/igb/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/rules/igb.mk b/rules/igb.mk index 9857c0517a0a..287689ad8d9e 100644 --- a/rules/igb.mk +++ b/rules/igb.mk @@ -1,6 +1,6 @@ # initramfs-tools package -IGB_DRIVER_VERSION = 5.3.5.4 +IGB_DRIVER_VERSION = 5.3.5.10 export IGB_DRIVER_VERSION IGB_DRIVER = igb.ko diff --git a/src/igb/Makefile b/src/igb/Makefile index 8fefa2ed2ae5..627c2035301e 100644 --- a/src/igb/Makefile +++ b/src/igb/Makefile @@ -6,7 +6,7 @@ MAIN_TARGET = igb.ko $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : rm -rf ./igb-$(IGB_DRIVER_VERSION) - wget -O igb-$(IGB_DRIVER_VERSION).tar.gz "https://sonicstorage.blob.core.windows.net/packages/igb-5.3.5.4.tar.gz?sv=2015-04-05&sr=b&sig=Y7pO2Y%2FLTdQe1XucyRhMZdbHV5duAdvRYOqgJ5D7l4c%3D&se=2031-03-08T08%3A31%3A39Z&sp=r" + wget -O igb-$(IGB_DRIVER_VERSION).tar.gz "https://sonicstorage.blob.core.windows.net/packages/igb-5.3.5.10.tar.gz?sv=2015-04-05&sr=b&sig=JShcQUqXm13Ni6Qaa3RTo%2FeEDIfuaqUTec%2FpV2J5dyA%3D&se=2154-07-27T09%3A09%3A02Z&sp=r" tar xzf igb-$(IGB_DRIVER_VERSION).tar.gz # Patch From 87ec4f113b3498fd9e4d51ba609765875861fab4 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Tue, 5 Sep 2017 05:02:37 +0000 Subject: [PATCH 067/180] [docker-syncd]: install kmod in docker-syncd-brcm without prompt --- platform/broadcom/docker-syncd-brcm/Dockerfile.j2 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platform/broadcom/docker-syncd-brcm/Dockerfile.j2 b/platform/broadcom/docker-syncd-brcm/Dockerfile.j2 index bd6d6cc35706..8fab6c032b12 100755 --- a/platform/broadcom/docker-syncd-brcm/Dockerfile.j2 +++ b/platform/broadcom/docker-syncd-brcm/Dockerfile.j2 @@ -20,7 +20,7 @@ debs/{{ deb }}{{' '}} {%- endfor %} ## TODO: add kmod into Depends -RUN apt-get install -f kmod +RUN apt-get install -yf kmod COPY ["files/dsserve", "files/bcmcmd", "start.sh", "bcmsh", "/usr/bin/"] RUN chmod +x /usr/bin/dsserve /usr/bin/bcmcmd From 8d43f3b672275ed2ab3f18d6666a45d25bd5858d Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 9 Sep 2017 02:35:42 +0000 Subject: [PATCH 068/180] [sonic-slave]: add deps for build initramfs 0.130 --- sonic-slave/Dockerfile | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sonic-slave/Dockerfile b/sonic-slave/Dockerfile index 768d1c73e89e..961df459d003 100644 --- a/sonic-slave/Dockerfile +++ b/sonic-slave/Dockerfile @@ -228,8 +228,9 @@ RUN apt-get update && apt-get install -y \ python3-pytest \ python3-colorama \ # For bash - texi2html - + texi2html \ +# For initramfs + bash-completion # For linux build RUN apt-get -y build-dep linux From 8c72d8c6f27ab5b2f0a9dabd8afe0efbd1d1945d Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Wed, 13 Sep 2017 07:02:53 +0000 Subject: [PATCH 069/180] [build]: insert overlay kmod for base image build --- Makefile | 3 +++ files/build_templates/sonic_debian_extension.j2 | 1 + 2 files changed, 4 insertions(+) diff --git a/Makefile b/Makefile index ccbefc9e0138..e0118af892b4 100644 --- a/Makefile +++ b/Makefile @@ -35,6 +35,7 @@ SLAVE_TAG = $(shell cat sonic-slave/Dockerfile.user sonic-slave/Dockerfile | sha SLAVE_BASE_IMAGE = sonic-slave-base SLAVE_IMAGE = sonic-slave-$(USER) +INSMOD_OVERLAY := sudo modprobe overlay DOCKER_RUN := docker run --rm=true --privileged \ -v $(PWD):/sonic \ -w /sonic \ @@ -86,6 +87,7 @@ SONIC_BUILD_INSTRUCTION := make \ @docker inspect --type image $(SLAVE_IMAGE):$(SLAVE_TAG) &> /dev/null || \ { echo Image $(SLAVE_IMAGE):$(SLAVE_TAG) not found. Building... ; \ $(DOCKER_BUILD) ; } + @$(INSMOD_OVERLAY) ifeq "$(KEEP_SLAVE_ON)" "yes" ifdef SOURCE_FOLDER @$(DOCKER_RUN) -v $(SOURCE_FOLDER):/var/$(USER)/src $(SLAVE_IMAGE):$(SLAVE_TAG) bash -c "$(SONIC_BUILD_INSTRUCTION) $@; /bin/bash" @@ -107,6 +109,7 @@ sonic-slave-bash : @docker inspect --type image $(SLAVE_IMAGE):$(SLAVE_TAG) &> /dev/null || \ { echo Image $(SLAVE_IMAGE):$(SLAVE_TAG) not found. Building... ; \ $(DOCKER_BUILD) ; } + @$(INSMOD_OVERLAY) @$(DOCKER_RUN) -t $(SLAVE_IMAGE):$(SLAVE_TAG) bash showtag: diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index e57ac20528ca..3160f76a53ea 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -44,6 +44,7 @@ sudo LANG=C chroot $FILESYSTEM_ROOT mount sysfs /sys -t sysfs sudo bash -c "echo \"DOCKER_OPTS=\"--storage-driver=overlay\"\" >> $FILESYSTEM_ROOT/etc/default/docker" sudo chroot $FILESYSTEM_ROOT service docker start +sudo chroot $FILESYSTEM_ROOT docker info # Apply apt configuration files sudo cp $IMAGE_CONFIGS/apt/sources.list $FILESYSTEM_ROOT/etc/apt/ From a87da7b1f94676a0490e9c4f4a3318ec5ad91d6d Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 23 Sep 2017 07:29:48 +0000 Subject: [PATCH 070/180] [build]: build stretch-based sonic slave docker --- Makefile | 15 +- sonic-slave-stretch/Dockerfile | 255 +++++++++++++++++++ sonic-slave-stretch/Dockerfile.user | 29 +++ sonic-slave-stretch/sonic-jenkins-id_rsa.pub | 1 + 4 files changed, 297 insertions(+), 3 deletions(-) create mode 100644 sonic-slave-stretch/Dockerfile create mode 100644 sonic-slave-stretch/Dockerfile.user create mode 100644 sonic-slave-stretch/sonic-jenkins-id_rsa.pub diff --git a/Makefile b/Makefile index e0118af892b4..6ce7250a9069 100644 --- a/Makefile +++ b/Makefile @@ -30,10 +30,19 @@ $(shell rm -f .screen) MAKEFLAGS += -B +ifeq ($(BLDENV), stretch) +SLAVE_BASE_TAG = $(shell sha1sum sonic-slave-stretch/Dockerfile | awk '{print substr($$1,0,11);}') +SLAVE_TAG = $(shell sha1sum sonic-slave-stretch/Dockerfile.user | awk '{print substr($$1,0,11);}') +SLAVE_BASE_IMAGE = sonic-slave-stretch-base +SLAVE_IMAGE = sonic-slave-stretch-$(USER) +SLAVE_DIR = sonic-slave-stretch +else SLAVE_BASE_TAG = $(shell sha1sum sonic-slave/Dockerfile | awk '{print substr($$1,0,11);}') SLAVE_TAG = $(shell cat sonic-slave/Dockerfile.user sonic-slave/Dockerfile | sha1sum | awk '{print substr($$1,0,11);}') SLAVE_BASE_IMAGE = sonic-slave-base SLAVE_IMAGE = sonic-slave-$(USER) +SLAVE_DIR = sonic-slave +endif INSMOD_OVERLAY := sudo modprobe overlay DOCKER_RUN := docker run --rm=true --privileged \ @@ -47,7 +56,7 @@ DOCKER_BASE_BUILD = docker build --no-cache \ -t $(SLAVE_BASE_IMAGE) \ --build-arg http_proxy=$(http_proxy) \ --build-arg https_proxy=$(https_proxy) \ - sonic-slave && \ + $(SLAVE_DIR) && \ docker tag $(SLAVE_BASE_IMAGE):latest $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) DOCKER_BUILD = docker build --no-cache \ @@ -56,8 +65,8 @@ DOCKER_BUILD = docker build --no-cache \ --build-arg guid=$(shell id -g) \ --build-arg hostname=$(shell echo $$HOSTNAME) \ -t $(SLAVE_IMAGE) \ - -f sonic-slave/Dockerfile.user \ - sonic-slave && \ + -f $(SLAVE_DIR)/Dockerfile.user \ + $(SLAVE_DIR) && \ docker tag $(SLAVE_IMAGE):latest $(SLAVE_IMAGE):$(SLAVE_TAG) SONIC_BUILD_INSTRUCTION := make \ diff --git a/sonic-slave-stretch/Dockerfile b/sonic-slave-stretch/Dockerfile new file mode 100644 index 000000000000..3b1a333f4831 --- /dev/null +++ b/sonic-slave-stretch/Dockerfile @@ -0,0 +1,255 @@ +FROM debian:stretch + +MAINTAINER gulv@microsoft.com + +RUN echo "deb http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free" >> /etc/apt/sources.list && \ + echo "deb-src http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free" >> /etc/apt/sources.list && \ + echo "deb http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free" >> /etc/apt/sources.list && \ + echo "deb-src http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free" >> /etc/apt/sources.list && \ + echo 'deb http://debian-archive.trafficmanager.net/debian stretch-backports main' >> /etc/apt/sources.list + +## Make apt-get non-interactive +ENV DEBIAN_FRONTEND=noninteractive + +RUN apt-get update && apt-get install -y \ + apt-utils \ + default-jre-headless \ + openssh-server \ + curl \ + wget \ + unzip \ + git \ + build-essential \ + libtool \ + lintian \ + sudo \ + dh-make \ + dh-exec \ + kmod \ + libtinyxml2-4 \ + libboost-program-options1.62-dev \ + libtinyxml2-dev \ + python \ + python-pip \ + libncurses5-dev \ + texinfo \ + dh-autoreconf \ + python3-pip \ + doxygen \ + devscripts \ + git-buildpackage \ + perl-modules \ + libswitch-perl \ + dh-systemd \ +# For quagga build + libreadline-dev \ + texlive-latex-base \ + texlive-generic-recommended \ + texlive-fonts-recommended \ + libpam0g-dev \ + libpam-dev \ + libcap-dev \ + imagemagick \ + ghostscript \ + groff \ + libpcre3-dev \ + gawk \ + chrpath \ +# For frr build + libc-ares-dev \ + libsnmp-dev \ + libjson-c3 \ + libjson-c-dev \ + libsystemd-dev \ + python-ipaddr \ +# For libnl3 (local) build + cdbs \ +# For SAI meta build + libxml-simple-perl \ + graphviz \ + aspell \ +# For linux build + bc \ + fakeroot \ + build-essential \ + devscripts \ + quilt \ + stgit \ +# For platform-modules build + module-assistant \ +# For thrift build\ + gem2deb \ + libboost-all-dev \ + libevent-dev \ + libglib2.0-dev \ + libqt4-dev \ + python-all-dev \ + python-twisted \ + phpunit \ + libbit-vector-perl \ + openjdk-8-jdk \ + javahelper \ + maven-debian-helper \ + ant \ + libmaven-ant-tasks-java \ + libhttpclient-java \ + libslf4j-java \ + libservlet3.1-java \ + qt5-default \ +# For mellanox sdk build + libpcre3 \ + libpcre3-dev \ + byacc \ + flex \ + libglib2.0-dev \ + bison \ + expat \ + libexpat1-dev \ + dpatch \ + libdb-dev \ + iptables-dev \ + swig \ +# For mellanox sai build + libtool-bin \ + libxml2-dev \ +# For build image + cpio \ + squashfs-tools \ + zip \ +# For broadcom sdk build + linux-compiler-gcc-6-x86 \ + linux-kbuild-4.9 \ +# teamd build + libdaemon-dev \ + libdbus-1-dev \ + libjansson-dev \ +# For cavium sdk build + libpcap-dev \ + dnsutils \ + libusb-dev \ +# For debian image reconfiguration + augeas-tools \ +# For p4 build + libyaml-dev \ + libevent-dev \ + libjudy-dev \ + libedit-dev \ + libnanomsg-dev \ + python-stdeb \ +# For redis build + libjemalloc-dev \ +# For mft kernel module build + dkms \ +# For python3.5 build + sharutils \ + libncursesw5-dev \ + libbz2-dev \ + liblzma-dev \ + libgdbm-dev \ + tk-dev \ + blt-dev \ + libmpdec-dev \ + libbluetooth-dev \ + locales \ + libsqlite3-dev \ + libgpm2 \ + time \ + net-tools \ + xvfb \ + python-sphinx \ + python3-sphinx \ +# For Jenkins static analysis, unit testing and code coverage + cppcheck \ + clang \ + pylint \ + python-pytest \ + gcovr \ + python-pytest-cov \ + python-parse \ +# For snmpd + default-libmysqlclient-dev \ + libssl-dev \ + libperl-dev \ + libpci-dev \ + libpci3 \ + libsensors4 \ + libsensors4-dev \ + libwrap0-dev \ +# For mpdecimal + docutils-common \ + libjs-sphinxdoc \ + libjs-underscore \ + python-docutils \ + python-jinja2 \ + python-markupsafe \ + python-pygments \ + python-roman \ + python-sphinx \ + sphinx-common \ + python3-sphinx \ +# For sonic config engine testing + python-lxml \ + python-jinja2 \ + python-netaddr \ + python-ipaddr \ + python-yaml \ +# For lockfile + procmail \ +# For gtest + libgtest-dev \ + cmake \ +# For initramfs + bash-completion + +# For linux build +RUN apt-get -y build-dep linux + +# For gobgp build +RUN export VERSION=1.8.3 \ + && wget https://storage.googleapis.com/golang/go$VERSION.linux-amd64.tar.gz \ + && tar -C /usr/local -xzf go$VERSION.linux-amd64.tar.gz \ + && echo 'export GOROOT=/usr/local/go' >> /etc/bash.bashrc \ + && echo 'export PATH=$PATH:$GOROOT/bin' >> /etc/bash.bashrc + +# For p4 build +RUN pip install \ + ctypesgen \ + crc16 + +# For templating +RUN pip install j2cli + +# For sonic config engine testing +RUN pip install pyangbind==0.5.10 + +# For supervisor build +RUN pip install meld3 mock + +# Install dependencies for isc-dhcp-relay build +RUN apt-get -y build-dep isc-dhcp + +RUN cd /usr/src/gtest && cmake . && make -C /usr/src/gtest + +RUN mkdir /var/run/sshd +EXPOSE 22 + +# Install depot-tools (for git-retry) +RUN git clone https://chromium.googlesource.com/chromium/tools/depot_tools.git /usr/share/depot_tools +ENV PATH /usr/share/depot_tools:$PATH + +# Install docker engine 17.03.2~ce-0 inside docker and enable experimental feature +RUN apt-get update +RUN apt-get install -y \ + apt-transport-https \ + ca-certificates \ + curl \ + gnupg2 \ + software-properties-common +RUN curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add - +RUN add-apt-repository \ + "deb [arch=amd64] https://download.docker.com/linux/debian \ + $(lsb_release -cs) \ + stable" +RUN apt-get update +RUN apt-get install -y docker-ce=17.03.2~ce-0~debian-stretch +RUN echo "DOCKER_OPTS=\"--experimental\"" >> /etc/default/docker diff --git a/sonic-slave-stretch/Dockerfile.user b/sonic-slave-stretch/Dockerfile.user new file mode 100644 index 000000000000..0b44faaf4a53 --- /dev/null +++ b/sonic-slave-stretch/Dockerfile.user @@ -0,0 +1,29 @@ +FROM sonic-slave-stretch-base + +# Add user +ARG user +ARG uid +ARG guid +ARG hostname + +ENV BUILD_HOSTNAME $hostname +ENV USER $user + +RUN groupadd -f -r -g $guid g$user + +RUN useradd $user -l -u $uid -g $guid -d /var/$user -m -s /bin/bash + +RUN gpasswd -a $user docker + +# Config git for stg +RUN su $user -c "git config --global user.name $user" +RUN su $user -c "git config --global user.email $user@contoso.com" + +COPY sonic-jenkins-id_rsa.pub /var/$user/.ssh/authorized_keys2 +RUN chown $user /var/$user/.ssh -R +RUN chmod go= /var/$user/.ssh -R + +# Add user to sudoers +RUN echo "$user ALL=(ALL) NOPASSWD:ALL" >>/etc/sudoers + +USER $user diff --git a/sonic-slave-stretch/sonic-jenkins-id_rsa.pub b/sonic-slave-stretch/sonic-jenkins-id_rsa.pub new file mode 100644 index 000000000000..2a19c9e70d3c --- /dev/null +++ b/sonic-slave-stretch/sonic-jenkins-id_rsa.pub @@ -0,0 +1 @@ +ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC769BQUJVeSIOyPsN4/Vo8xTqXQ6RI7ysVyCw/ABP3FIxf+fxmtm8t/Nbp9hq0uLHOjCw8UQbJ+XltsThFWJfH6RJY5NbfvwG7nUDjfjjp+SGEIHaVgIlpiuqiPbZ6QMjZ8Q0Sgi5p5ts1xe/4TFThwOJBHmhwydD5nk3BH7P3DDwlOCov5gjM40uMZJkketlO83zGG+25zu7O0hfDVt1vyK9bNWAhhPmGc79zdetfeFCxjimsff2m31B1KuVXiT5PDB1w+BSrUK6nNzJubnYCRgjg4prVTjA50EhlT2P7EoJAbW3TnTq8vUDkcstsGe/HZpfIB1VHBX97u4fAfGJZ root@acs-jenkins From a7192939a08529537cb8b55f97605a9ed7469101 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Tue, 26 Sep 2017 08:25:17 +0000 Subject: [PATCH 071/180] [build]: sonic-slave-stretch- sha both Dockerfile and Dockerfile.user --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6ce7250a9069..c5c5d59620c8 100644 --- a/Makefile +++ b/Makefile @@ -32,7 +32,7 @@ MAKEFLAGS += -B ifeq ($(BLDENV), stretch) SLAVE_BASE_TAG = $(shell sha1sum sonic-slave-stretch/Dockerfile | awk '{print substr($$1,0,11);}') -SLAVE_TAG = $(shell sha1sum sonic-slave-stretch/Dockerfile.user | awk '{print substr($$1,0,11);}') +SLAVE_TAG = $(shell cat sonic-slave-stretch/Dockerfile.user sonic-slave-stretch/Dockerfile | sha1sum | awk '{print substr($$1,0,11);}') SLAVE_BASE_IMAGE = sonic-slave-stretch-base SLAVE_IMAGE = sonic-slave-stretch-$(USER) SLAVE_DIR = sonic-slave-stretch From 540a87a9db285198186718ef5c47fe41f3373aee Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Tue, 5 Sep 2017 05:43:05 +0000 Subject: [PATCH 072/180] [opennsl]: use opennsl kernel module based on kernel 4.9.0-3 --- files/build_templates/swss.service.j2 | 8 ++++---- platform/broadcom/sdk.mk | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/files/build_templates/swss.service.j2 b/files/build_templates/swss.service.j2 index e16ca6636121..510a5fff2e96 100644 --- a/files/build_templates/swss.service.j2 +++ b/files/build_templates/swss.service.j2 @@ -2,16 +2,16 @@ Description=switch state service Requires=database.service updategraph.service {% if sonic_asic_platform == 'broadcom' %} -Requires=opennsl-modules-3.16.0-5-amd64.service +Requires=opennsl-modules-4.9.0-3-amd64.service {% elif sonic_asic_platform == 'nephos' %} -Requires=nps-modules-3.16.0-5-amd64.service +Requires=nps-modules-4.9.0-3-amd64.service {% endif %} After=database.service updategraph.service After=interfaces-config.service {% if sonic_asic_platform == 'broadcom' %} -After=opennsl-modules-3.16.0-5-amd64.service +After=opennsl-modules-4.9.0-3-amd64.service {% elif sonic_asic_platform == 'nephos' %} -After=nps-modules-3.16.0-5-amd64.service +After=nps-modules-4.9.0-3-amd64.service {% endif %} [Service] diff --git a/platform/broadcom/sdk.mk b/platform/broadcom/sdk.mk index 2ffa374b1ba5..abdf689fe346 100644 --- a/platform/broadcom/sdk.mk +++ b/platform/broadcom/sdk.mk @@ -1,4 +1,4 @@ -BRCM_OPENNSL_KERNEL = opennsl-modules-3.16.0-5-amd64_3.4.1.11-5_amd64.deb -$(BRCM_OPENNSL_KERNEL)_URL = "https://sonicstorage.blob.core.windows.net/packages/opennsl-modules-3.16.0-5-amd64_3.4.1.11-5_amd64.deb?sv=2015-04-05&sr=b&sig=VefDUeIdEvgV1007LX9P3aRmMAeO4hnMcIAyXkOBEp8%3D&se=2032-03-19T18%3A23%3A58Z&sp=r" +BRCM_OPENNSL_KERNEL = opennsl-modules-4.9.0-3-amd64_3.2.3.3-2_amd64.deb +$(BRCM_OPENNSL_KERNEL)_URL = "https://sonicstorage.blob.core.windows.net/packages/opennsl-modules-4.9.0-3-amd64_3.2.3.3-2_amd64.deb?sv=2015-04-05&sr=b&sig=HieTgULvva7WlMRegUhfoRFqkj2Oe9sAVxU%2FgCGj9Ys%3D&se=2154-09-28T04%3A46%3A03Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_OPENNSL_KERNEL) From 5d1a7a1f3a8058c4b9c846f98fbe7e38895aeeee Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 3 Sep 2017 22:21:07 +0000 Subject: [PATCH 073/180] [temp]: disable building platform drivers tempoerarily --- platform/broadcom/rules.mk | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/platform/broadcom/rules.mk b/platform/broadcom/rules.mk index d883b1668bb3..0e4551718547 100755 --- a/platform/broadcom/rules.mk +++ b/platform/broadcom/rules.mk @@ -1,15 +1,15 @@ include $(PLATFORM_PATH)/sdk.mk include $(PLATFORM_PATH)/sai.mk -include $(PLATFORM_PATH)/platform-modules-s6000.mk -include $(PLATFORM_PATH)/platform-modules-dell.mk -include $(PLATFORM_PATH)/platform-modules-arista.mk -include $(PLATFORM_PATH)/platform-modules-ingrasys.mk -include $(PLATFORM_PATH)/platform-modules-accton.mk -include $(PLATFORM_PATH)/platform-modules-inventec.mk -include $(PLATFORM_PATH)/platform-modules-cel.mk -include $(PLATFORM_PATH)/platform-modules-delta.mk -include $(PLATFORM_PATH)/platform-modules-quanta.mk -include $(PLATFORM_PATH)/platform-modules-mitac.mk +#include $(PLATFORM_PATH)/platform-modules-s6000.mk +#include $(PLATFORM_PATH)/platform-modules-dell.mk +#include $(PLATFORM_PATH)/platform-modules-arista.mk +#include $(PLATFORM_PATH)/platform-modules-ingrasys.mk +#include $(PLATFORM_PATH)/platform-modules-accton.mk +#include $(PLATFORM_PATH)/platform-modules-inventec.mk +#include $(PLATFORM_PATH)/platform-modules-cel.mk +#include $(PLATFORM_PATH)/platform-modules-delta.mk +#include $(PLATFORM_PATH)/platform-modules-quanta.mk +#include $(PLATFORM_PATH)/platform-modules-mitac.mk include $(PLATFORM_PATH)/docker-orchagent-brcm.mk include $(PLATFORM_PATH)/docker-syncd-brcm.mk include $(PLATFORM_PATH)/docker-syncd-brcm-rpc.mk From 23c3bfe186515462702dff81c6cb5b0021b7ec3a Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 6 Nov 2017 02:49:04 +0000 Subject: [PATCH 074/180] [kernel]: fix linux-headers common deb file name --- rules/linux-kernel.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/rules/linux-kernel.mk b/rules/linux-kernel.mk index c7eea31354bb..f1d589505a4d 100644 --- a/rules/linux-kernel.mk +++ b/rules/linux-kernel.mk @@ -7,7 +7,7 @@ KERNEL_SUBVERSION = 2+deb9u5 export KVERSION_SHORT KVERSION KERNEL_VERSION KERNEL_SUBVERSION -LINUX_HEADERS_COMMON = linux-headers-$(KVERSION_SHORT)-common_$(KERNEL_VERSION)-$(KERNEL_SUBVERSION)_amd64.deb +LINUX_HEADERS_COMMON = linux-headers-$(KVERSION_SHORT)-common_$(KERNEL_VERSION)-$(KERNEL_SUBVERSION)_all.deb $(LINUX_HEADERS_COMMON)_SRC_PATH = $(SRC_PATH)/sonic-linux-kernel SONIC_MAKE_DEBS += $(LINUX_HEADERS_COMMON) From a0280dd5002d5c1769bf78b2714286edb458986f Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 6 Nov 2017 04:54:25 +0000 Subject: [PATCH 075/180] update build instructions --- README.md | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/README.md b/README.md index 6bc218bf00a7..8d4a9e2f20fc 100644 --- a/README.md +++ b/README.md @@ -80,10 +80,9 @@ The SONiC installer contains all docker images needed. SONiC uses one image for For Broadcom ASIC, we build ONIE and EOS image. EOS image is used for Arista devices, ONIE image is used for all other Broadcom ASIC based devices. make configure PLATFORM=broadcom + BLDENV=stretch make target/debs/linux-headers-4.9.0-3-common_4.9.30-2+deb9u5_all.deb target/debs/igb.ko # build ONIE image make target/sonic-broadcom.bin - # build EOS image - make target/sonic-aboot-broadcom.swi You may find the rules/config file useful. It contains configuration options for the build process, like adding more verbosity or showing dependencies, username and password for base image etc. From 2449fafae0820e40a213537a883253052d3d5bd4 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Wed, 6 Dec 2017 08:51:28 +0000 Subject: [PATCH 076/180] [kernel]: update kernel submodule and remove standalone igb driver --- README.md | 2 +- build_debian.sh | 3 - rules/igb.mk | 9 --- slave.mk | 1 - src/igb/Makefile | 23 ------- ...1-add-PHY-support-for-Broadcom-54616.patch | 61 ------------------- src/sonic-linux-kernel | 2 +- 7 files changed, 2 insertions(+), 99 deletions(-) delete mode 100644 rules/igb.mk delete mode 100644 src/igb/Makefile delete mode 100644 src/igb/patch/0001-add-PHY-support-for-Broadcom-54616.patch diff --git a/README.md b/README.md index 8d4a9e2f20fc..dc359d2b56d3 100644 --- a/README.md +++ b/README.md @@ -80,7 +80,7 @@ The SONiC installer contains all docker images needed. SONiC uses one image for For Broadcom ASIC, we build ONIE and EOS image. EOS image is used for Arista devices, ONIE image is used for all other Broadcom ASIC based devices. make configure PLATFORM=broadcom - BLDENV=stretch make target/debs/linux-headers-4.9.0-3-common_4.9.30-2+deb9u5_all.deb target/debs/igb.ko + BLDENV=stretch make target/debs/linux-headers-4.9.0-3-common_4.9.30-2+deb9u5_all.deb # build ONIE image make target/sonic-broadcom.bin diff --git a/build_debian.sh b/build_debian.sh index c5c1d23050eb..6af4346ab1d5 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -151,9 +151,6 @@ sudo chmod +x $FILESYSTEM_ROOT/etc/initramfs-tools/hooks/union-fsck pushd $FILESYSTEM_ROOT/usr/share/initramfs-tools/scripts/init-bottom && sudo patch -p1 < $OLDPWD/files/initramfs-tools/udev.patch; popd sudo chroot $FILESYSTEM_ROOT update-initramfs -u -## Install latest intel igb driver -sudo cp target/debs/igb.ko $FILESYSTEM_ROOT/lib/modules/${LINUX_KERNEL_VERSION}-amd64/kernel/drivers/net/ethernet/intel/igb/igb.ko - ## Install latest intel ixgbe driver sudo cp target/debs/ixgbe.ko $FILESYSTEM_ROOT/lib/modules/3.16.0-5-amd64/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.ko diff --git a/rules/igb.mk b/rules/igb.mk deleted file mode 100644 index 287689ad8d9e..000000000000 --- a/rules/igb.mk +++ /dev/null @@ -1,9 +0,0 @@ -# initramfs-tools package - -IGB_DRIVER_VERSION = 5.3.5.10 -export IGB_DRIVER_VERSION - -IGB_DRIVER = igb.ko -$(IGB_DRIVER)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) -$(IGB_DRIVER)_SRC_PATH = $(SRC_PATH)/igb -SONIC_MAKE_DEBS += $(IGB_DRIVER) diff --git a/slave.mk b/slave.mk index d21670d241b5..c10b9c877e35 100644 --- a/slave.mk +++ b/slave.mk @@ -455,7 +455,6 @@ $(addprefix $(TARGET_PATH)/, $(SONIC_INSTALLERS)) : $(TARGET_PATH)/% : \ $$(addprefix $(FILES_PATH)/,$$($$*_FILES)) \ $(addprefix $(DEBS_PATH)/,$(INITRAMFS_TOOLS) \ $(LINUX_KERNEL) \ - $(IGB_DRIVER) \ $(IXGBE_DRIVER) \ $(SONIC_DEVICE_DATA) \ $(PYTHON_CLICK) \ diff --git a/src/igb/Makefile b/src/igb/Makefile deleted file mode 100644 index 627c2035301e..000000000000 --- a/src/igb/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -.ONESHELL: -SHELL = /bin/bash -.SHELLFLAGS += -e - -MAIN_TARGET = igb.ko - -$(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : - rm -rf ./igb-$(IGB_DRIVER_VERSION) - wget -O igb-$(IGB_DRIVER_VERSION).tar.gz "https://sonicstorage.blob.core.windows.net/packages/igb-5.3.5.10.tar.gz?sv=2015-04-05&sr=b&sig=JShcQUqXm13Ni6Qaa3RTo%2FeEDIfuaqUTec%2FpV2J5dyA%3D&se=2154-07-27T09%3A09%3A02Z&sp=r" - tar xzf igb-$(IGB_DRIVER_VERSION).tar.gz - - # Patch - pushd ./igb-$(IGB_DRIVER_VERSION) - patch -p1 < ../patch/0001-add-PHY-support-for-Broadcom-54616.patch - - # Build the package - pushd src - export BUILD_KERNEL=4.9.0-3-amd64 - make - popd - - popd - mv ./igb-$(IGB_DRIVER_VERSION)/src/$* $(DEST)/ diff --git a/src/igb/patch/0001-add-PHY-support-for-Broadcom-54616.patch b/src/igb/patch/0001-add-PHY-support-for-Broadcom-54616.patch deleted file mode 100644 index fc468f337356..000000000000 --- a/src/igb/patch/0001-add-PHY-support-for-Broadcom-54616.patch +++ /dev/null @@ -1,61 +0,0 @@ -From 10ed7b7e0fd06c312f497e4647c4140b1cc8eef8 Mon Sep 17 00:00:00 2001 -From: Guohan Lu -Date: Mon, 8 May 2017 05:53:38 +0000 -Subject: [PATCH] add PHY support for Broadcom 54616 - ---- - src/e1000_82575.c | 5 +++++ - src/e1000_defines.h | 1 + - src/e1000_hw.h | 1 + - 3 files changed, 7 insertions(+) - -diff --git a/src/e1000_82575.c b/src/e1000_82575.c -index b4b973e..afaa7e5 100644 ---- a/src/e1000_82575.c -+++ b/src/e1000_82575.c -@@ -302,6 +302,9 @@ static s32 e1000_init_phy_params_82575(struct e1000_hw *hw) - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; - phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_m88; - break; -+ case BCM54616_E_PHY_ID: -+ phy->type = e1000_phy_bcm54616; -+ break; - default: - ret_val = -E1000_ERR_PHY; - goto out; -@@ -1602,6 +1605,8 @@ static s32 e1000_setup_copper_link_82575(struct e1000_hw *hw) - case e1000_phy_82580: - ret_val = e1000_copper_link_setup_82577(hw); - break; -+ case e1000_phy_bcm54616: -+ break; - default: - ret_val = -E1000_ERR_PHY; - break; -diff --git a/src/e1000_defines.h b/src/e1000_defines.h -index 6de3988..773c464 100644 ---- a/src/e1000_defines.h -+++ b/src/e1000_defines.h -@@ -1185,6 +1185,7 @@ - #define I210_I_PHY_ID 0x01410C00 - #define IGP04E1000_E_PHY_ID 0x02A80391 - #define M88_VENDOR 0x0141 -+#define BCM54616_E_PHY_ID 0x03625D10 - - /* M88E1000 Specific Registers */ - #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Reg */ -diff --git a/src/e1000_hw.h b/src/e1000_hw.h -index 3bcecf1..cca5d77 100644 ---- a/src/e1000_hw.h -+++ b/src/e1000_hw.h -@@ -133,6 +133,7 @@ enum e1000_phy_type { - e1000_phy_82580, - e1000_phy_vf, - e1000_phy_i210, -+ e1000_phy_bcm54616, - }; - - enum e1000_bus_type { --- -2.7.4 - diff --git a/src/sonic-linux-kernel b/src/sonic-linux-kernel index 61923df04554..a21a592baf4b 160000 --- a/src/sonic-linux-kernel +++ b/src/sonic-linux-kernel @@ -1 +1 @@ -Subproject commit 61923df04554c64107fc91c095016232fb1859a0 +Subproject commit a21a592baf4b189591f63fe7930f7d889bccd57a From 0e141a54e919cf36fb8b08a4d8b12f7a64153c9c Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 11 Dec 2017 17:00:41 +0000 Subject: [PATCH 077/180] [baseimage]: install acl package --- build_debian.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/build_debian.sh b/build_debian.sh index 6af4346ab1d5..4d361c8a500c 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -115,6 +115,7 @@ sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/initramfs-tools_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/linux-image-${LINUX_KERNEL_VERSION}-amd64_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f +sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install acl ## Update initramfs for booting with squashfs+overlay cat files/initramfs-tools/modules | sudo tee -a $FILESYSTEM_ROOT/etc/initramfs-tools/modules > /dev/null From 0827ed3b1a86626afadcbbc3805c31b3c5d25538 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 11 Dec 2017 19:05:03 +0000 Subject: [PATCH 078/180] [baseimage]: install tacacs dependencies --- files/build_templates/sonic_debian_extension.j2 | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index 3160f76a53ea..0faaa5582ea6 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -116,9 +116,12 @@ sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/sonic-device-data_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f # Install pam-tacplus and nss-tacplus -sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/libtac2_*.deb -sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/libpam-tacplus_*.deb -sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/libnss-tacplus_*.deb +sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/libtac2_*.deb || \ + sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f +sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/libpam-tacplus_*.deb || \ + sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f +sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/libnss-tacplus_*.deb || \ + sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f # Disable tacplus by default sudo LANG=C chroot $FILESYSTEM_ROOT pam-auth-update --remove tacplus sudo sed -i -e '/^passwd/s/ tacplus//' $FILESYSTEM_ROOT/etc/nsswitch.conf From 9aebe0985449b6a702d024f74a5cde6042eb04a2 Mon Sep 17 00:00:00 2001 From: Marian Pritsak Date: Wed, 27 Dec 2017 20:46:37 +0200 Subject: [PATCH 079/180] [Mellanox]: Upgrade MFT package to 4.8.26 (#3) This version is compatible with Linux kernel 4.9 Signed-off-by: marian-pritsak --- platform/mellanox/mft.mk | 4 ++-- platform/mellanox/mft/Makefile | 5 +++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/platform/mellanox/mft.mk b/platform/mellanox/mft.mk index 9f9c65ec5176..559ff3b4cd99 100644 --- a/platform/mellanox/mft.mk +++ b/platform/mellanox/mft.mk @@ -1,7 +1,7 @@ # Mellanox SAI -MFT_VERSION = 4.9.0 -MFT_REVISION = 38 +MFT_VERSION = 4.8.0 +MFT_REVISION = 26 export MFT_VERSION MFT_REVISION diff --git a/platform/mellanox/mft/Makefile b/platform/mellanox/mft/Makefile index 450e59eec44b..15a12decb4e8 100644 --- a/platform/mellanox/mft/Makefile +++ b/platform/mellanox/mft/Makefile @@ -1,5 +1,6 @@ .ONESHELL: SHELL = /bin/bash +.SHELLFLAGS += -e MFT_NAME = mft-$(MFT_VERSION)-$(MFT_REVISION)-x86_64-deb MFT_TGZ = $(MFT_NAME).tgz @@ -17,7 +18,7 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # put a lock here because dpkg does not allow installing packages in parallel while true; do if mkdir $(DEST)/dpkg_lock &> /dev/null; then - { echo here && sudo dpkg -i $(SRC_DEB) && rm -d $(DEST)/dpkg_lock && break; } || { rm -d $(DEST)/dpkg_lock && exit 1 ; } + { sudo dpkg -i $(SRC_DEB) && rm -d $(DEST)/dpkg_lock && break; } || { rm -d $(DEST)/dpkg_lock && exit 1 ; } fi done @@ -26,6 +27,6 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # fix timestamp because we do not actually build tools, only kernel touch $(MFT_NAME)/DEBS/* - mv $(MFT_NAME)/SDEBS/ubuntu-drivers/3.16.0/kernel-mft-dkms_$(MFT_VERSION)-$(KVERSION)_all.deb $(MFT_NAME)/DEBS/* $(DEST) + mv $(MFT_NAME)/SDEBS/ubuntu-drivers/4.9.0/kernel-mft-dkms_$(MFT_VERSION)-$(KVERSION)_all.deb $(MFT_NAME)/DEBS/* $(DEST) $(addprefix $(DEST)/, $(DERIVED_TARGETS)): $(DEST)/% : $(DEST)/$(MAIN_TARGET) From cd1d1b1896b5e22e7167bd769f1a118513f0c35c Mon Sep 17 00:00:00 2001 From: Marian Pritsak Date: Sat, 30 Dec 2017 06:39:58 +0200 Subject: [PATCH 080/180] [Mellanox]: Update recipe for hw-management (#4) Update package revision Create submodule for sources Signed-off-by: marian-pritsak --- .gitmodules | 3 + platform/mellanox/hw-management.mk | 4 +- .../Add-systemd-service-config.patch | 59 ------------------- platform/mellanox/hw-management/Makefile | 19 ------ 4 files changed, 5 insertions(+), 80 deletions(-) delete mode 100644 platform/mellanox/hw-management/Add-systemd-service-config.patch delete mode 100644 platform/mellanox/hw-management/Makefile diff --git a/.gitmodules b/.gitmodules index ffde4484d85c..1ef6b76f5947 100755 --- a/.gitmodules +++ b/.gitmodules @@ -81,3 +81,6 @@ [submodule "platform/barefoot/sonic-platform-modules-arista"] path = platform/barefoot/sonic-platform-modules-arista url = https://github.com/aristanetworks/sonic +[submodule "platform/mellanox/hw-management"] + path = platform/mellanox/hw-management + url = https://github.com/Mellanox/hw-mgmt/ diff --git a/platform/mellanox/hw-management.mk b/platform/mellanox/hw-management.mk index 70dd2d330167..b165390cea56 100644 --- a/platform/mellanox/hw-management.mk +++ b/platform/mellanox/hw-management.mk @@ -1,10 +1,10 @@ # Mellanox HW Management -MLNX_HW_MANAGEMENT_VERSION = V1.0.0190 +MLNX_HW_MANAGEMENT_VERSION = onl.deb9.13.12.2017 export MLNX_HW_MANAGEMENT_VERSION MLNX_HW_MANAGEMENT = hw-management_1.mlnx.$(MLNX_HW_MANAGEMENT_VERSION)_amd64.deb $(MLNX_HW_MANAGEMENT)_SRC_PATH = $(PLATFORM_PATH)/hw-management $(MLNX_HW_MANAGEMENT)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) -SONIC_MAKE_DEBS += $(MLNX_HW_MANAGEMENT) +SONIC_DPKG_DEBS += $(MLNX_HW_MANAGEMENT) diff --git a/platform/mellanox/hw-management/Add-systemd-service-config.patch b/platform/mellanox/hw-management/Add-systemd-service-config.patch deleted file mode 100644 index bbaed885dcb3..000000000000 --- a/platform/mellanox/hw-management/Add-systemd-service-config.patch +++ /dev/null @@ -1,59 +0,0 @@ -From 22fef644b1150677353ab0559828ea45a982d901 Mon Sep 17 00:00:00 2001 -From: Andriy Moroz -Date: Wed, 11 Jul 2018 16:51:07 +0300 -Subject: [PATCH] Add systemd service config - -Signed-off-by: Andriy Moroz ---- - debian/control | 2 +- - debian/hw-management.service | 10 ++++++++++ - debian/rules | 2 +- - 3 files changed, 12 insertions(+), 2 deletions(-) - create mode 100644 debian/hw-management.service - -diff --git a/debian/control b/debian/control -index 048cd61..7e3a545 100644 ---- a/debian/control -+++ b/debian/control -@@ -1,7 +1,7 @@ - Source: hw-management - Priority: extra - Maintainer: Adir Atias --Build-Depends: -+Build-Depends: dh-systemd - Standards-Version: - Section: libs - Homepage: http://www.mellanox.com -diff --git a/debian/hw-management.service b/debian/hw-management.service -new file mode 100644 -index 0000000..d18916d ---- /dev/null -+++ b/debian/hw-management.service -@@ -0,0 +1,11 @@ -+[Unit] -+Description=Mellanox Hardware Management -+ -+[Service] -+Type=oneshot -+EnvironmentFile=/host/machine.conf -+ExecStart=/bin/bash -c "/usr/share/sonic/device/$onie_platform/hw-management start" -+ExecStop=/bin/bash -c "/usr/share/sonic/device/$onie_platform/hw-management stop" -+ -+[Install] -+WantedBy=multi-user.target -diff --git a/debian/rules b/debian/rules -index fc38817..fba4150 100755 ---- a/debian/rules -+++ b/debian/rules -@@ -8,7 +8,7 @@ K_SRC ?= "/lib/modules/$(KVERSION)/build" - pwd=$(shell pwd) - - %: -- dh $@ -+ dh $@ --with systemd - - override_dh_auto_configure: - --- -1.9.1 - diff --git a/platform/mellanox/hw-management/Makefile b/platform/mellanox/hw-management/Makefile deleted file mode 100644 index 4fa5d2cf328c..000000000000 --- a/platform/mellanox/hw-management/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -.ONESHELL: -SHELL = /bin/bash - -MAIN_TARGET = hw-management_1.mlnx.$(MLNX_HW_MANAGEMENT_VERSION)_amd64.deb - -$(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : - # get sources - sudo rm -rf hw-management - git clone https://github.com/Mellanox/hw-mgmt/ -b $(MLNX_HW_MANAGEMENT_VERSION) hw-management - - # build - pushd hw-management - git am ../*.patch - sed "s~@SED_VERSION@~$(MLNX_HW_MANAGEMENT_VERSION)~" -i debian/changelog - chmod +x ./debian/rules - sudo ./debian/rules binary KVERSION=$(KVERSION) - popd - - mv $* $(DEST)/ From 13c83ac6f94ab24789d4d844564950f7163189b1 Mon Sep 17 00:00:00 2001 From: lguohan Date: Wed, 3 Jan 2018 00:52:57 -0800 Subject: [PATCH 081/180] [platform]: enable platform driver for dell s6000 (#5) --- .gitmodules | 3 ++- platform/broadcom/rules.mk | 2 +- platform/broadcom/sonic-platform-modules-s6000 | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/.gitmodules b/.gitmodules index 1ef6b76f5947..1f78a328b631 100755 --- a/.gitmodules +++ b/.gitmodules @@ -38,7 +38,8 @@ url = https://github.com/Azure/sonic-utilities [submodule "platform/broadcom/sonic-platform-modules-s6000"] path = platform/broadcom/sonic-platform-modules-s6000 - url = https://github.com/Azure/sonic-platform-modules-s6000 + url = https://github.com/lguohan/sonic-platform-modules-s6000 + branch = stretch [submodule "platform/broadcom/sonic-platform-modules-arista"] path = platform/broadcom/sonic-platform-modules-arista url = https://github.com/aristanetworks/sonic diff --git a/platform/broadcom/rules.mk b/platform/broadcom/rules.mk index 0e4551718547..680b03afdf41 100755 --- a/platform/broadcom/rules.mk +++ b/platform/broadcom/rules.mk @@ -1,6 +1,6 @@ include $(PLATFORM_PATH)/sdk.mk include $(PLATFORM_PATH)/sai.mk -#include $(PLATFORM_PATH)/platform-modules-s6000.mk +include $(PLATFORM_PATH)/platform-modules-s6000.mk #include $(PLATFORM_PATH)/platform-modules-dell.mk #include $(PLATFORM_PATH)/platform-modules-arista.mk #include $(PLATFORM_PATH)/platform-modules-ingrasys.mk diff --git a/platform/broadcom/sonic-platform-modules-s6000 b/platform/broadcom/sonic-platform-modules-s6000 index ed9ea067b5cb..168674d34148 160000 --- a/platform/broadcom/sonic-platform-modules-s6000 +++ b/platform/broadcom/sonic-platform-modules-s6000 @@ -1 +1 @@ -Subproject commit ed9ea067b5cbfd7d1c835a903729f9dc28d3b035 +Subproject commit 168674d34148fbf7e8a989edae6a341272a9cffa From 35ab7a6e093820a2b0f944b5dd4906306b058704 Mon Sep 17 00:00:00 2001 From: lguohan Date: Wed, 10 Jan 2018 01:34:46 -0800 Subject: [PATCH 082/180] [kernel]: upgrade linux kernel to 4.9.0-5 (4.9.65-3+deb9u2) (#8) --- build_debian.sh | 2 +- files/build_templates/swss.service.j2 | 8 ++++---- installer/x86_64/install.sh | 4 ++-- platform/broadcom/sdk.mk | 4 ++-- rules/linux-kernel.mk | 6 +++--- 5 files changed, 12 insertions(+), 12 deletions(-) diff --git a/build_debian.sh b/build_debian.sh index 4d361c8a500c..119aded61ee7 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -30,7 +30,7 @@ set -x -e ## docker engine version (with platform) DOCKER_VERSION=1.11.1-0~stretch_amd64 -LINUX_KERNEL_VERSION=4.9.0-3 +LINUX_KERNEL_VERSION=4.9.0-5 ## Working directory to prepare the file system FILESYSTEM_ROOT=./fsroot diff --git a/files/build_templates/swss.service.j2 b/files/build_templates/swss.service.j2 index 510a5fff2e96..1ceb706a175d 100644 --- a/files/build_templates/swss.service.j2 +++ b/files/build_templates/swss.service.j2 @@ -2,16 +2,16 @@ Description=switch state service Requires=database.service updategraph.service {% if sonic_asic_platform == 'broadcom' %} -Requires=opennsl-modules-4.9.0-3-amd64.service +Requires=opennsl-modules-4.9.0-5-amd64.service {% elif sonic_asic_platform == 'nephos' %} -Requires=nps-modules-4.9.0-3-amd64.service +Requires=nps-modules-4.9.0-5-amd64.service {% endif %} After=database.service updategraph.service After=interfaces-config.service {% if sonic_asic_platform == 'broadcom' %} -After=opennsl-modules-4.9.0-3-amd64.service +After=opennsl-modules-4.9.0-5-amd64.service {% elif sonic_asic_platform == 'nephos' %} -After=nps-modules-4.9.0-3-amd64.service +After=nps-modules-4.9.0-5-amd64.service {% endif %} [Service] diff --git a/installer/x86_64/install.sh b/installer/x86_64/install.sh index eb7cab38609a..327c0c47f111 100755 --- a/installer/x86_64/install.sh +++ b/installer/x86_64/install.sh @@ -570,12 +570,12 @@ menuentry '$demo_grub_entry' { if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi insmod part_msdos insmod ext2 - linux /$image_dir/boot/vmlinuz-4.9.0-3-amd64 root=$grub_cfg_root rw $GRUB_CMDLINE_LINUX \ + linux /$image_dir/boot/vmlinuz-4.9.0-5-amd64 root=$grub_cfg_root rw $GRUB_CMDLINE_LINUX \ net.ifnames=0 biosdevname=0 \ loop=$image_dir/$FILESYSTEM_SQUASHFS loopfstype=squashfs \ apparmor=1 security=apparmor varlog_size=$VAR_LOG_SIZE usbcore.autosuspend=-1 $ONIE_PLATFORM_EXTRA_CMDLINE_LINUX echo 'Loading $demo_volume_label $demo_type initial ramdisk ...' - initrd /$image_dir/boot/initrd.img-4.9.0-3-amd64 + initrd /$image_dir/boot/initrd.img-4.9.0-5-amd64 } EOF diff --git a/platform/broadcom/sdk.mk b/platform/broadcom/sdk.mk index abdf689fe346..12b0262b9305 100644 --- a/platform/broadcom/sdk.mk +++ b/platform/broadcom/sdk.mk @@ -1,4 +1,4 @@ -BRCM_OPENNSL_KERNEL = opennsl-modules-4.9.0-3-amd64_3.2.3.3-2_amd64.deb -$(BRCM_OPENNSL_KERNEL)_URL = "https://sonicstorage.blob.core.windows.net/packages/opennsl-modules-4.9.0-3-amd64_3.2.3.3-2_amd64.deb?sv=2015-04-05&sr=b&sig=HieTgULvva7WlMRegUhfoRFqkj2Oe9sAVxU%2FgCGj9Ys%3D&se=2154-09-28T04%3A46%3A03Z&sp=r" +BRCM_OPENNSL_KERNEL = opennsl-modules-4.9.0-5-amd64_3.2.3.7-1_amd64.deb +$(BRCM_OPENNSL_KERNEL)_URL = "https://sonicstorage.blob.core.windows.net/packages/opennsl-modules-4.9.0-5-amd64_3.2.3.7-1_amd64.deb?sv=2015-04-05&sr=b&sig=nju9vaqIjRlzV7V0wirMP6%2FNCJRsNqC%2FdqdqgxA0wrQ%3D&se=2154-12-03T07%3A37%3A17Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_OPENNSL_KERNEL) diff --git a/rules/linux-kernel.mk b/rules/linux-kernel.mk index f1d589505a4d..333301644d50 100644 --- a/rules/linux-kernel.mk +++ b/rules/linux-kernel.mk @@ -1,9 +1,9 @@ # linux kernel package -KVERSION_SHORT = 4.9.0-3 +KVERSION_SHORT = 4.9.0-5 KVERSION = $(KVERSION_SHORT)-amd64 -KERNEL_VERSION = 4.9.30 -KERNEL_SUBVERSION = 2+deb9u5 +KERNEL_VERSION = 4.9.65 +KERNEL_SUBVERSION = 3+deb9u2 export KVERSION_SHORT KVERSION KERNEL_VERSION KERNEL_SUBVERSION From 5ae64e7f2d07a244c87fe4489a75619912cba6b0 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Wed, 10 Jan 2018 10:48:24 +0000 Subject: [PATCH 083/180] [ixgbe]: compile and install ixgbe to 4.9.0-5 kernel --- build_debian.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/build_debian.sh b/build_debian.sh index 119aded61ee7..05eb3d91fcee 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -153,7 +153,7 @@ pushd $FILESYSTEM_ROOT/usr/share/initramfs-tools/scripts/init-bottom && sudo pat sudo chroot $FILESYSTEM_ROOT update-initramfs -u ## Install latest intel ixgbe driver -sudo cp target/debs/ixgbe.ko $FILESYSTEM_ROOT/lib/modules/3.16.0-5-amd64/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.ko +sudo cp target/debs/ixgbe.ko $FILESYSTEM_ROOT/lib/modules/${LINUX_KERNEL_VERSION}-amd64/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.ko ## Install docker echo '[INFO] Install docker' From f9c57838b1fc0394ba8f2eda1c754c6289c2dff4 Mon Sep 17 00:00:00 2001 From: Marian Pritsak Date: Fri, 26 Jan 2018 20:16:51 +0200 Subject: [PATCH 084/180] [mellanox]: Adapt to new hw-management package (#12) Use single start script for all platforms and remove symbolic links Change path to system eeprom Signed-off-by: marian-pritsak --- device/mellanox/x86_64-mlnx_msn2100-r0/hw-management | 1 - device/mellanox/x86_64-mlnx_msn2100-r0/plugins/eeprom.py | 2 +- device/mellanox/x86_64-mlnx_msn2410-r0/hw-management | 1 - device/mellanox/x86_64-mlnx_msn2410-r0/plugins/eeprom.py | 2 +- device/mellanox/x86_64-mlnx_msn2700-r0/hw-management | 1 - device/mellanox/x86_64-mlnx_msn2700-r0/plugins/eeprom.py | 2 +- device/mellanox/x86_64-mlnx_msn2740-r0/hw-management | 1 - device/mellanox/x86_64-mlnx_msn2740-r0/plugins/eeprom.py | 2 +- 8 files changed, 4 insertions(+), 8 deletions(-) delete mode 120000 device/mellanox/x86_64-mlnx_msn2100-r0/hw-management delete mode 120000 device/mellanox/x86_64-mlnx_msn2410-r0/hw-management delete mode 120000 device/mellanox/x86_64-mlnx_msn2700-r0/hw-management delete mode 120000 device/mellanox/x86_64-mlnx_msn2740-r0/hw-management diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/hw-management b/device/mellanox/x86_64-mlnx_msn2100-r0/hw-management deleted file mode 120000 index daef0037ddae..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/hw-management +++ /dev/null @@ -1 +0,0 @@ -/etc/mlnx/msn2100 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/eeprom.py b/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/eeprom.py index 3650d9c8b70b..61e37b51db71 100644 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/eeprom.py +++ b/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/eeprom.py @@ -28,5 +28,5 @@ class board(eeprom_tlvinfo.TlvInfoDecoder): _TLV_INFO_MAX_LEN = 256 def __init__(self, name, path, cpld_root, ro): - self.eeprom_path = "/bsp/eeprom/sys_eeprom" + self.eeprom_path = "/bsp/eeprom/vpd_info" super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/hw-management b/device/mellanox/x86_64-mlnx_msn2410-r0/hw-management deleted file mode 120000 index 5b9a76d3d47b..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/hw-management +++ /dev/null @@ -1 +0,0 @@ -/etc/mlnx/msn2410 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/eeprom.py b/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/eeprom.py index 3650d9c8b70b..61e37b51db71 100644 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/eeprom.py +++ b/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/eeprom.py @@ -28,5 +28,5 @@ class board(eeprom_tlvinfo.TlvInfoDecoder): _TLV_INFO_MAX_LEN = 256 def __init__(self, name, path, cpld_root, ro): - self.eeprom_path = "/bsp/eeprom/sys_eeprom" + self.eeprom_path = "/bsp/eeprom/vpd_info" super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/hw-management b/device/mellanox/x86_64-mlnx_msn2700-r0/hw-management deleted file mode 120000 index eb5e941daad7..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/hw-management +++ /dev/null @@ -1 +0,0 @@ -/etc/mlnx/msn2700 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/eeprom.py b/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/eeprom.py index 3650d9c8b70b..61e37b51db71 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/eeprom.py +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/eeprom.py @@ -28,5 +28,5 @@ class board(eeprom_tlvinfo.TlvInfoDecoder): _TLV_INFO_MAX_LEN = 256 def __init__(self, name, path, cpld_root, ro): - self.eeprom_path = "/bsp/eeprom/sys_eeprom" + self.eeprom_path = "/bsp/eeprom/vpd_info" super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/hw-management b/device/mellanox/x86_64-mlnx_msn2740-r0/hw-management deleted file mode 120000 index b231cbeea1bf..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2740-r0/hw-management +++ /dev/null @@ -1 +0,0 @@ -/etc/mlnx/msn2740 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/eeprom.py b/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/eeprom.py index 3650d9c8b70b..61e37b51db71 100644 --- a/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/eeprom.py +++ b/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/eeprom.py @@ -28,5 +28,5 @@ class board(eeprom_tlvinfo.TlvInfoDecoder): _TLV_INFO_MAX_LEN = 256 def __init__(self, name, path, cpld_root, ro): - self.eeprom_path = "/bsp/eeprom/sys_eeprom" + self.eeprom_path = "/bsp/eeprom/vpd_info" super(board, self).__init__(self.eeprom_path, 0, '', True) From 9801ba9cc93216d1e31a42fca5d16d7b3038e6fe Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 12 Feb 2018 21:19:11 +0000 Subject: [PATCH 085/180] [devices]: enable platform modules for various platforms --- README.md | 8 +++++++- platform/broadcom/rules.mk | 10 +++++----- 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/README.md b/README.md index dc359d2b56d3..12aafefa44b6 100644 --- a/README.md +++ b/README.md @@ -80,7 +80,13 @@ The SONiC installer contains all docker images needed. SONiC uses one image for For Broadcom ASIC, we build ONIE and EOS image. EOS image is used for Arista devices, ONIE image is used for all other Broadcom ASIC based devices. make configure PLATFORM=broadcom - BLDENV=stretch make target/debs/linux-headers-4.9.0-3-common_4.9.30-2+deb9u5_all.deb + BLDENV=stretch make target/debs/linux-headers-4.9.0-3-common_4.9.30-2+deb9u5_all.deb \ + target/debs/sonic-platform-quanta-ix1b-32x_1.0_amd64.deb \ + target/debs/platform-modules-d7032q28b_1.1.0_amd64.deb \ + target/debs/sonic-platform-accton-as7712-32x_1.1_amd64.deb \ + target/debs/sonic-platform-ingrasys-s9100_1.1.0_amd64.deb \ + target/debs/platform-modules-z9100_1.1_amd64.deb \ + target/debs/platform-modules-s6000_1.0_amd64.deb # build ONIE image make target/sonic-broadcom.bin diff --git a/platform/broadcom/rules.mk b/platform/broadcom/rules.mk index 680b03afdf41..9b1941008654 100755 --- a/platform/broadcom/rules.mk +++ b/platform/broadcom/rules.mk @@ -1,14 +1,14 @@ include $(PLATFORM_PATH)/sdk.mk include $(PLATFORM_PATH)/sai.mk include $(PLATFORM_PATH)/platform-modules-s6000.mk -#include $(PLATFORM_PATH)/platform-modules-dell.mk +include $(PLATFORM_PATH)/platform-modules-dell.mk #include $(PLATFORM_PATH)/platform-modules-arista.mk -#include $(PLATFORM_PATH)/platform-modules-ingrasys.mk -#include $(PLATFORM_PATH)/platform-modules-accton.mk -#include $(PLATFORM_PATH)/platform-modules-inventec.mk +include $(PLATFORM_PATH)/platform-modules-ingrasys.mk +include $(PLATFORM_PATH)/platform-modules-accton.mk +include $(PLATFORM_PATH)/platform-modules-inventec.mk #include $(PLATFORM_PATH)/platform-modules-cel.mk #include $(PLATFORM_PATH)/platform-modules-delta.mk -#include $(PLATFORM_PATH)/platform-modules-quanta.mk +include $(PLATFORM_PATH)/platform-modules-quanta.mk #include $(PLATFORM_PATH)/platform-modules-mitac.mk include $(PLATFORM_PATH)/docker-orchagent-brcm.mk include $(PLATFORM_PATH)/docker-syncd-brcm.mk From 759edc93c9595af6e6021a6c48663c20f4bda7e2 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Tue, 13 Feb 2018 14:02:37 +0000 Subject: [PATCH 086/180] [dell]: update to stretch-kernel based dell modules --- .gitmodules | 3 ++- platform/broadcom/sonic-platform-modules-dell | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/.gitmodules b/.gitmodules index 1f78a328b631..d4131be318d3 100755 --- a/.gitmodules +++ b/.gitmodules @@ -45,7 +45,8 @@ url = https://github.com/aristanetworks/sonic [submodule "platform/broadcom/sonic-platform-modules-dell"] path = platform/broadcom/sonic-platform-modules-dell - url = https://github.com/Azure/sonic-platform-modules-dell + url = https://github.com/lguohan/sonic-platform-modules-dell + branch = stretch [submodule "platform/broadcom/sonic-platform-modules-ingrasys"] path = platform/broadcom/sonic-platform-modules-ingrasys url = https://github.com/Ingrasys-sonic/sonic-platform-modules-ingrasys diff --git a/platform/broadcom/sonic-platform-modules-dell b/platform/broadcom/sonic-platform-modules-dell index 8bc799d26011..31993888a172 160000 --- a/platform/broadcom/sonic-platform-modules-dell +++ b/platform/broadcom/sonic-platform-modules-dell @@ -1 +1 @@ -Subproject commit 8bc799d26011622be07e03f888b4dd4c6b014d38 +Subproject commit 31993888a17291eb28ef674d6e2c973c539e806d From f489bea10577bda30000597080a315c61d5b0aa6 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Fri, 16 Feb 2018 03:22:49 +0000 Subject: [PATCH 087/180] [platform]: incorporate sonic-platform-modules-cel into sonic buildimage repo --- .gitmodules | 3 - platform/broadcom/sonic-platform-modules-cel | 1 - .../sonic-platform-modules-cel/.gitignore | 33 + .../sonic-platform-modules-cel/LICENSE | 15 + .../sonic-platform-modules-cel/README.md | 1 + .../debian/changelog | 38 + .../sonic-platform-modules-cel/debian/compat | 1 + .../sonic-platform-modules-cel/debian/control | 12 + .../debian/platform-modules-dx010.init | 106 +++ .../debian/platform-modules-dx010.install | 2 + .../sonic-platform-modules-cel/debian/rules | 33 + .../dx010/cfg/dx010-modules.conf | 15 + .../dx010/modules/Makefile | 1 + .../dx010/modules/dx010_cpld.c | 506 ++++++++++ .../dx010/modules/dx010_wdt.c | 215 +++++ .../dx010/modules/emc2305.c | 877 ++++++++++++++++++ .../dx010/modules/leds-dx010.c | 289 ++++++ .../dx010/modules/lm75.c | 553 +++++++++++ .../dx010/modules/lm75.h | 49 + .../dx010/modules/mc24lc64t.c | 142 +++ .../dx010/scripts/dx010_check_qsfp.sh | 7 + 21 files changed, 2895 insertions(+), 4 deletions(-) delete mode 160000 platform/broadcom/sonic-platform-modules-cel create mode 100644 platform/broadcom/sonic-platform-modules-cel/.gitignore create mode 100644 platform/broadcom/sonic-platform-modules-cel/LICENSE create mode 100644 platform/broadcom/sonic-platform-modules-cel/README.md create mode 100644 platform/broadcom/sonic-platform-modules-cel/debian/changelog create mode 100644 platform/broadcom/sonic-platform-modules-cel/debian/compat create mode 100644 platform/broadcom/sonic-platform-modules-cel/debian/control create mode 100644 platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init create mode 100644 platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.install create mode 100644 platform/broadcom/sonic-platform-modules-cel/debian/rules create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/cfg/dx010-modules.conf create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/dx010_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/dx010_wdt.c create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/emc2305.c create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/leds-dx010.c create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/mc24lc64t.c create mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/scripts/dx010_check_qsfp.sh diff --git a/.gitmodules b/.gitmodules index d4131be318d3..f0cbe5c2a38c 100755 --- a/.gitmodules +++ b/.gitmodules @@ -59,9 +59,6 @@ [submodule "platform/broadcom/sonic-platform-modules-accton"] path = platform/broadcom/sonic-platform-modules-accton url = https://github.com/edge-core/sonic-platform-modules-accton.git -[submodule "platform/broadcom/sonic-platform-modules-cel"] - path = platform/broadcom/sonic-platform-modules-cel - url = https://github.com/celestica-Inc/sonic-platform-modules-cel.git [submodule "src/sonic-frr/frr"] path = src/sonic-frr/frr url = https://github.com/FRRouting/frr.git diff --git a/platform/broadcom/sonic-platform-modules-cel b/platform/broadcom/sonic-platform-modules-cel deleted file mode 160000 index 5ec0c5e5d4fe..000000000000 --- a/platform/broadcom/sonic-platform-modules-cel +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 5ec0c5e5d4fe8f2ec1ab5a6abefa7d168a81ca98 diff --git a/platform/broadcom/sonic-platform-modules-cel/.gitignore b/platform/broadcom/sonic-platform-modules-cel/.gitignore new file mode 100644 index 000000000000..f805e810e5c6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/.gitignore @@ -0,0 +1,33 @@ +# Object files +*.o +*.ko +*.obj +*.elf + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su diff --git a/platform/broadcom/sonic-platform-modules-cel/LICENSE b/platform/broadcom/sonic-platform-modules-cel/LICENSE new file mode 100644 index 000000000000..2386a3920c07 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/LICENSE @@ -0,0 +1,15 @@ +Copyright (C) 2017 Celestica, Inc + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/broadcom/sonic-platform-modules-cel/README.md b/platform/broadcom/sonic-platform-modules-cel/README.md new file mode 100644 index 000000000000..b09a36b51d95 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/README.md @@ -0,0 +1 @@ +platform drivers for Celestica DX010 for the SONiC project diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/changelog b/platform/broadcom/sonic-platform-modules-cel/debian/changelog new file mode 100644 index 000000000000..20ce5072b874 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/debian/changelog @@ -0,0 +1,38 @@ +sonic-cel-platform-modules (0.6) unstable; urgency=low + + * Remove unused port-mode switch script. This should be done by hwsku config script. + * Add script to turn off QSFP low power mode when boot up. + + -- Pradchaya Phucharoen Wed, 26 July 2017 10:43:00 +0700 + +sonic-cel-platform-modules (0.5) unstable; urgency=low + + * Add port-mode switch script to support 100G 50G 10G_50G qsfp modes. + * Fix garbage data when using sfputil to read QSFP-transceiver's eeprom. + * Fix incorrect endian in eeprom read word data. + + -- Pradchaya Phucharoen Tue, 18 July 2017 11:30:00 +0700 + +sonic-cel-platform-modules (0.4) unstable; urgency=low + + * Add support for DX010's fancontrol, automatic run-up and FIX bug lpmod + + -- Pariwat Leamsumran Thu, 14 June 2017 16:25:00 +0700 + +sonic-cel-platform-modules (0.3) unstable; urgency=low + + * Add support for DX010's DPS800 + + -- Abhisit Sangjan Thu, 29 May 2017 19:23:00 +0700 + +sonic-cel-platform-modules (0.2) unstable; urgency=low + + * Add support for DX010's LM75B, Watchdog and EMC2305 + + -- Abhisit Sangjan Thu, 25 May 2017 15:26:00 +0700 + +sonic-cel-platform-modules (0.1) unstable; urgency=low + + * Initial release + + -- Abhisit Sangjan Mon, 2 May 2017 14:47:00 +0700 diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/compat b/platform/broadcom/sonic-platform-modules-cel/debian/compat new file mode 100644 index 000000000000..ec635144f600 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/debian/compat @@ -0,0 +1 @@ +9 diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/control b/platform/broadcom/sonic-platform-modules-cel/debian/control new file mode 100644 index 000000000000..72bcd54ee62c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/debian/control @@ -0,0 +1,12 @@ +Source: sonic-cel-platform-modules +Section: main +Priority: extra +Maintainer: Abhisit Sangjan +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: platform-modules-dx010 +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init new file mode 100644 index 000000000000..0c883cd388ae --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init @@ -0,0 +1,106 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: $portmap +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup DX010 board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + modprobe i2c-dev + modprobe i2c-mux-pca954x + modprobe dx010_wdt + modprobe leds-dx010 + + found=0 + for devnum in 0 1; do + devname=`cat /sys/bus/i2c/devices/i2c-${devnum}/name` + # iSMT adapter can be at either dffd0000 or dfff0000 + if [[ $devname == 'SMBus iSMT adapter at '* ]]; then + found=1 + break + fi + done + + [ $found -eq 0 ] && echo "cannot find iSMT" && exit 1 + + i2cset -y ${devnum} 0x70 0x10 0x00 0x01 i + + # Attach PCA9541 Ox70 Master Selector + chmod 755 /sys/bus/i2c/devices/i2c-${devnum}/new_device + echo pca9541 0x70 > /sys/bus/i2c/devices/i2c-${devnum}/new_device + sleep 1 + + # Attach PCA9548 0x71 Channel Extender for Main Board + echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-${devnum}/new_device + sleep 1 + + # Attach PCA9548 0x73 Channel Extender for CPU Board + echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-${devnum}/new_device + sleep 1 + + # Attach PCA9548 0x77 Channel Extender for Fan's EEPROMs + echo pca9548 0x77 > /sys/bus/i2c/devices/i2c-${devnum}/new_device + sleep 1 + + # Attach syseeprom + echo 24lc64t 0x50 > /sys/bus/i2c/devices/i2c-12/new_device + + # Attach temperature sensors + echo dx010_lm75b 0x48 > /sys/bus/i2c/devices/i2c-5/new_device + echo dx010_lm75b 0x49 > /sys/bus/i2c/devices/i2c-6/new_device + echo dx010_lm75b 0x4a > /sys/bus/i2c/devices/i2c-7/new_device + echo dx010_lm75b 0x48 > /sys/bus/i2c/devices/i2c-14/new_device + echo dx010_lm75b 0x4e > /sys/bus/i2c/devices/i2c-15/new_device + + # Attach fans + echo emc2305 0x2e > /sys/bus/i2c/devices/i2c-13/new_device + echo emc2305 0x4d > /sys/bus/i2c/devices/i2c-13/new_device + + # Attach PSUs + echo dps460 0x5a > /sys/bus/i2c/devices/i2c-10/new_device + echo dps460 0x5b > /sys/bus/i2c/devices/i2c-11/new_device + + # Attach PCA9506 GPIO expander for 40 pins + echo pca9505 0x20 > /sys/bus/i2c/devices/i2c-17/new_device + + modprobe dx010_cpld + sleep 2 + + # Turn off/down lpmod by defult (0 - Normal, 1 - Low Pow) + echo 0x00000000 > /sys/devices/platform/dx010_cpld/qsfp_lpmode + + # Attach 32 instances of EEPROM driver QSFP ports + for ((n=26;n<=58;n++)); + do + echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-$n/new_device + sleep 0.1 + done + + echo "done." + ;; + +stop) + echo "done." + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/platform-modules-dx010.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.install b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.install new file mode 100644 index 000000000000..329b584dc427 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.install @@ -0,0 +1,2 @@ +dx010/scripts/dx010_check_qsfp.sh usr/local/bin +dx010/cfg/dx010-modules.conf etc/modules-load.d diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/rules b/platform/broadcom/sonic-platform-modules-cel/debian/rules new file mode 100644 index 000000000000..fa9bb741d5a6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/debian/rules @@ -0,0 +1,33 @@ +#!/usr/bin/make -f + +export INSTALL_MOD_DIR:=extra + +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MOD_SRC_DIR:= $(shell pwd) +MODULE_DIRS:= dx010 + +%: + dh $@ + +override_dh_auto_build: + (for mod in $(MODULE_DIRS); do \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ + done) + +override_dh_auto_install: + (for mod in $(MODULE_DIRS); do \ + dh_installdirs -pplatform-modules-$${mod} \ + $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/modules/*.ko \ + debian/platform-modules-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + done) + +override_dh_usrlocal: + +override_dh_clean: + dh_clean + (for mod in $(MODULE_DIRS); do \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules clean; \ + done) + diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/cfg/dx010-modules.conf b/platform/broadcom/sonic-platform-modules-cel/dx010/cfg/dx010-modules.conf new file mode 100644 index 000000000000..66f002a5fc94 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/cfg/dx010-modules.conf @@ -0,0 +1,15 @@ +# /etc/modules: kernel modules to load at boot time. +# +# This file contains the names of kernel modules that should be loaded +# at boot time, one per line. Lines beginning with "#" are ignored. + +i2c-i801 +i2c-isch +i2c-ismt +i2c-dev +i2c-mux +i2c-smbus + +i2c-mux-gpio +i2c-mux-pca954x + diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile new file mode 100644 index 000000000000..c4109ec772ea --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile @@ -0,0 +1 @@ +obj-m := dx010_cpld.o mc24lc64t.o emc2305.o dx010_wdt.o leds-dx010.o lm75.o diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/dx010_cpld.c b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/dx010_cpld.c new file mode 100644 index 000000000000..ab0692faab78 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/dx010_cpld.c @@ -0,0 +1,506 @@ +/* + * dx010_cpld.c - driver for SeaStone's CPLD + * + * Copyright (C) 2017 Celestica Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "dx010_cpld" + +#define LPMOD0108 0x252 +#define LPMOD0910 0x253 +#define LPMOD1118 0x2d2 +#define LPMOD1921 0x2d3 +#define LPMOD2229 0x3d2 +#define LPMOD3032 0x3d3 + +#define ABS0108 0x254 +#define ABS0910 0x255 +#define ABS1118 0x2d4 +#define ABS1921 0x2d5 +#define ABS2229 0x3d4 +#define ABS3032 0x3d5 + +#define INT0108 0x256 +#define INT0910 0x257 +#define INT1118 0x2d6 +#define INT1921 0x2d7 +#define INT2229 0x3d6 +#define INT3032 0x3d7 + +#define LENGTH_PORT_CPLD 34 +#define PORT_BANK1_START 1 +#define PORT_BANK1_END 10 +#define PORT_BANK2_START 11 +#define PORT_BANK2_END 21 +#define PORT_BANK3_START 22 +#define PORT_BANK3_END 32 +#define PORT_SFPP1 33 +#define PORT_SFPP2 34 + +#define PORT_ID_BANK1 0x210 +#define PORT_ID_BANK2 0x290 +#define PORT_ID_BANK3 0x390 + +#define OPCODE_ID_BANK1 0x211 +#define OPCODE_ID_BANK2 0x291 +#define OPCODE_ID_BANK3 0x391 + +#define DEVADDR_ID_BANK1 0x212 +#define DEVADDR_ID_BANK2 0x292 +#define DEVADDR_ID_BANK3 0x392 + +#define CMDBYT_ID_BANK1 0x213 +#define CMDBYT_ID_BANK2 0x293 +#define CMDBYT_ID_BANK3 0x393 + +#define WRITE_ID_BANK1 0x220 +#define WRITE_ID_BANK2 0x2A0 +#define WRITE_ID_BANK3 0x3A0 + +#define READ_ID_BANK1 0x230 +#define READ_ID_BANK2 0x2B0 +#define READ_ID_BANK3 0x3B0 + +#define SSRR_ID_BANK1 0x216 +#define SSRR_ID_BANK2 0x296 +#define SSRR_ID_BANK3 0x396 + +#define HST_CNTL2_QUICK 0x00 +#define HST_CNTL2_BYTE 0x01 +#define HST_CNTL2_BYTE_DATA 0x02 +#define HST_CNTL2_WORD_DATA 0x03 +#define HST_CNTL2_BLOCK 0x05 + +struct dx010_i2c_data { + int portid; +}; + +struct dx010_cpld_data { + struct i2c_adapter *i2c_adapter[LENGTH_PORT_CPLD]; + struct mutex cpld_lock; +}; + +struct dx010_cpld_data *cpld_data; + +static ssize_t get_lpmode(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned long lpmod = 0; + + mutex_lock(&cpld_data->cpld_lock); + + lpmod = + (inb(LPMOD3032) & 0x07) << (24+5) | + inb(LPMOD2229) << (24-3) | + (inb(LPMOD1921) & 0x07) << (16 + 2) | + inb(LPMOD1118) << (16-6) | + (inb(LPMOD0910) & 0x03 ) << 8 | + inb(LPMOD0108); + + mutex_unlock(&cpld_data->cpld_lock); + + return sprintf(buf,"0x%8.8lx\n", lpmod & 0xffffffff); +} + +static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long lpmod; + int err; + + mutex_lock(&cpld_data->cpld_lock); + + err = kstrtoul(buf, 16, &lpmod); + if (err) + { + mutex_unlock(&cpld_data->cpld_lock); + return err; + } + + outb( (lpmod >> 0) & 0xFF, LPMOD0108); + outb( (lpmod >> 8) & 0x03, LPMOD0910); + outb( (lpmod >> 10) & 0xFF, LPMOD1118); + outb( (lpmod >> 18) & 0x07, LPMOD1921); + outb( (lpmod >> 21) & 0xFF, LPMOD2229); + outb( (lpmod >> 29) & 0x07, LPMOD3032); + + mutex_unlock(&cpld_data->cpld_lock); + + return count; +} + +static ssize_t get_modprs(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned long present; + + mutex_lock(&cpld_data->cpld_lock); + + present = + (inb(ABS3032) & 0x07) << (24+5) | + inb(ABS2229) << (24-3) | + (inb(ABS1921) & 0x07) << (16 + 2) | + inb(ABS1118) << (16-6) | + (inb(ABS0910) & 0x03) << 8 | + inb(ABS0108); + + mutex_unlock(&cpld_data->cpld_lock); + + return sprintf(buf,"0x%8.8lx\n", present & 0xffffffff); +} + +static ssize_t get_modirq(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned long irq; + + mutex_lock(&cpld_data->cpld_lock); + + irq = + (inb(INT3032) & 0x07) << (24+5) | + inb(INT2229) << (24-3) | + (inb(INT1921) & 0x07) << (16 + 2) | + inb(INT1118) << (16-6) | + (inb(INT0910) & 0x03) << 8 | + inb(INT0108); + + mutex_unlock(&cpld_data->cpld_lock); + + return sprintf(buf,"0x%8.8lx\n", irq & 0xffffffff); +} + +static DEVICE_ATTR(qsfp_lpmode, S_IRUGO | S_IWUSR, get_lpmode, set_lpmode); +static DEVICE_ATTR(qsfp_modprs, S_IRUGO, get_modprs, NULL); +static DEVICE_ATTR(qsfp_modirq, S_IRUGO, get_modirq, NULL); + +static struct attribute *dx010_lpc_attrs[] = { + &dev_attr_qsfp_lpmode.attr, + &dev_attr_qsfp_modprs.attr, + &dev_attr_qsfp_modirq.attr, + NULL, +}; + +static struct attribute_group dx010_lpc_attr_grp = { + .attrs = dx010_lpc_attrs, +}; + +static struct resource cel_dx010_lpc_resources[] = { + { + .flags = IORESOURCE_IO, + }, +}; + +static void cel_dx010_lpc_dev_release( struct device * dev) +{ + return; +} + +static struct platform_device cel_dx010_lpc_dev = { + .name = DRIVER_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(cel_dx010_lpc_resources), + .resource = cel_dx010_lpc_resources, + .dev = { + .release = cel_dx010_lpc_dev_release, + } +}; + + +/** + * Read eeprom of QSFP device. + * @param a i2c adapter. + * @param addr address to read. + * @param new_data QSFP port number struct. + * @param cmd i2c command. + * @return 0 if not error, else the error code. + */ +static int i2c_read_eeprom(struct i2c_adapter *a, u16 addr, + struct dx010_i2c_data *new_data, u8 cmd, union i2c_smbus_data *data){ + + u32 reg; + int ioBase=0; + char byte; + short temp; + short portid, opcode, devaddr, cmdbyte0, ssrr, writedata, readdata; + __u16 word_data; + char read_byte; + int error = -EIO; + + mutex_lock(&cpld_data->cpld_lock); + + if (((new_data->portid >= PORT_BANK1_START) + && (new_data->portid <= PORT_BANK1_END)) + || (new_data->portid == PORT_SFPP1) + || (new_data->portid == PORT_SFPP2)) + { + portid = PORT_ID_BANK1; + opcode = OPCODE_ID_BANK1; + devaddr = DEVADDR_ID_BANK1; + cmdbyte0 = CMDBYT_ID_BANK1; + ssrr = SSRR_ID_BANK1; + writedata = WRITE_ID_BANK1; + readdata = READ_ID_BANK1; + }else if ((new_data->portid >= PORT_BANK2_START) && (new_data->portid <= PORT_BANK2_END)){ + portid = PORT_ID_BANK2; + opcode = OPCODE_ID_BANK2; + devaddr = DEVADDR_ID_BANK2; + cmdbyte0 = CMDBYT_ID_BANK2; + ssrr = SSRR_ID_BANK2; + writedata = WRITE_ID_BANK2; + readdata = READ_ID_BANK2; + }else if ((new_data->portid >= PORT_BANK3_START) && (new_data->portid <= PORT_BANK3_END)){ + portid = PORT_ID_BANK3; + opcode = OPCODE_ID_BANK3; + devaddr = DEVADDR_ID_BANK3; + cmdbyte0 = CMDBYT_ID_BANK3; + ssrr = SSRR_ID_BANK3; + writedata = WRITE_ID_BANK3; + readdata = READ_ID_BANK3; + }else{ + /* Invalid parameter! */ + error = -EINVAL; + goto exit; + } + + while ((inb(ioBase + ssrr) & 0x40)); + if ((inb(ioBase + ssrr) & 0x80) == 0x80) { + error = -EIO; + /* Read error reset the port */ + outb(0x00, ioBase + ssrr); + udelay(3000); + outb(0x01, ioBase + ssrr); + goto exit; + } + + byte = 0x40 +new_data->portid; + reg = cmd; + outb(byte, ioBase + portid); + outb(reg,ioBase + cmdbyte0); + byte = 33; + outb(byte, ioBase + opcode); + addr = addr << 1; + addr |= 0x01; + outb(addr, ioBase + devaddr); + while ((inb(ioBase + ssrr) & 0x40)) + { + udelay(100); + } + + if ((inb(ioBase + ssrr) & 0x80) == 0x80) { + /* Read error reset the port */ + error = -EIO; + outb(0x00, ioBase + ssrr); + udelay(3000); + outb(0x01, ioBase + ssrr); + goto exit; + } + + temp = ioBase + readdata; + word_data = inb(temp); + word_data |= (inb(++temp) << 8); + + mutex_unlock(&cpld_data->cpld_lock); + data->word = word_data; + return 0; + +exit: + mutex_unlock(&cpld_data->cpld_lock); + return error; +} + +static int dx010_i2c_access(struct i2c_adapter *a, u16 addr, + unsigned short flags, char rw, u8 cmd, + int size, union i2c_smbus_data *data) +{ + + int error = 0; + + struct dx010_i2c_data *new_data; + + /* Write the command register */ + new_data = i2c_get_adapdata(a); + + /* Map the size to what the chip understands */ + switch (size) { + case I2C_SMBUS_QUICK: + size = HST_CNTL2_QUICK; + break; + case I2C_SMBUS_BYTE: + size = HST_CNTL2_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + size = HST_CNTL2_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + size = HST_CNTL2_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + size = HST_CNTL2_BLOCK; + break; + default: + dev_warn(&a->dev, "Unsupported transaction %d\n", size); + error = -EOPNOTSUPP; + goto Done; + } + + switch (size) { + case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */ + break; + case HST_CNTL2_BYTE_DATA: + break; + case HST_CNTL2_WORD_DATA: + if( 0 == i2c_read_eeprom(a,addr,new_data,cmd,data)){ + error = 0; + }else{ + error = -EIO; + } + break; + } + +Done: + return error; +} + +static u32 dx010_i2c_func(struct i2c_adapter *a) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static const struct i2c_algorithm dx010_i2c_algorithm = { + .smbus_xfer = dx010_i2c_access, + .functionality = dx010_i2c_func, +}; + +static struct i2c_adapter * cel_dx010_i2c_init(struct platform_device *pdev, int portid) +{ + int error; + + struct i2c_adapter *new_adapter; + struct dx010_i2c_data *new_data; + + new_adapter = kzalloc(sizeof(*new_adapter), GFP_KERNEL); + if (!new_adapter) + return NULL; + + new_adapter->dev.parent = &pdev->dev; + new_adapter->owner = THIS_MODULE; + new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + new_adapter->algo = &dx010_i2c_algorithm; + + snprintf(new_adapter->name, sizeof(new_adapter->name), + "SMBus dx010 i2c Adapter portid@%04x", portid); + + new_data = kzalloc(sizeof(*new_data), GFP_KERNEL); + if (!new_data) + return NULL; + + new_data->portid = portid; + + i2c_set_adapdata(new_adapter,new_data); + + error = i2c_add_adapter(new_adapter); + if(error) + return NULL; + + return new_adapter; +}; + +static int cel_dx010_lpc_drv_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret =0; + int portid_count; + + cpld_data = devm_kzalloc(&pdev->dev, sizeof(struct dx010_cpld_data), + GFP_KERNEL); + if (!cpld_data) + return -ENOMEM; + + mutex_init(&cpld_data->cpld_lock); + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (unlikely(!res)) { + printk(KERN_ERR " Specified Resource Not Available...\n"); + return -1; + } + + ret = sysfs_create_group(&pdev->dev.kobj, &dx010_lpc_attr_grp); + if (ret) { + printk(KERN_ERR "Cannot create sysfs\n"); + } + + for(portid_count=1 ; portid_count<=LENGTH_PORT_CPLD ; portid_count++) + cpld_data->i2c_adapter[portid_count-1] = + cel_dx010_i2c_init(pdev, portid_count); + + return 0; +} + +static int cel_dx010_lpc_drv_remove(struct platform_device *pdev) +{ + int portid_count; + struct dx010_i2c_data *new_data; + + sysfs_remove_group(&pdev->dev.kobj, &dx010_lpc_attr_grp); + + for (portid_count=1 ; portid_count<=LENGTH_PORT_CPLD ; portid_count++) + i2c_del_adapter(cpld_data->i2c_adapter[portid_count-1]); + + return 0; +} + +static struct platform_driver cel_dx010_lpc_drv = { + .probe = cel_dx010_lpc_drv_probe, + .remove = __exit_p(cel_dx010_lpc_drv_remove), + .driver = { + .name = DRIVER_NAME, + }, +}; + +int cel_dx010_lpc_init(void) +{ + platform_device_register(&cel_dx010_lpc_dev); + platform_driver_register(&cel_dx010_lpc_drv); + + return 0; +} + +void cel_dx010_lpc_exit(void) +{ + platform_driver_unregister(&cel_dx010_lpc_drv); + platform_device_unregister(&cel_dx010_lpc_dev); +} + +module_init(cel_dx010_lpc_init); +module_exit(cel_dx010_lpc_exit); + +MODULE_AUTHOR("Abhisit Sangjan "); +MODULE_AUTHOR("Pariwat Leamsumran "); +MODULE_DESCRIPTION("Celestica SeaStone DX010 LPC Driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/dx010_wdt.c b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/dx010_wdt.c new file mode 100644 index 000000000000..a386c065051a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/dx010_wdt.c @@ -0,0 +1,215 @@ +/* + * Watchdog driver for the Seastone DX010 + * + * Copyright (C) 2017 Celestica Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define DRIVER_NAME "dx010_wdt" + +#define RESET_CTRL 0x102 +#define WDT_MASK 0x04 +#define WDI_GPIO_DIR 0x504 +#define WDI_GPIO 0x508 + +static bool nowayout = WATCHDOG_NOWAYOUT; + +struct dx010_wdt_drvdata { + struct watchdog_device wdt; + struct mutex lock; +}; + +static struct resource dx010_wdt_resources[] = { + { + .flags = IORESOURCE_IO, + }, +}; + +static void dx010_wdt_dev_release( struct device * dev) +{ + return; +} + +static struct platform_device dx010_wdt_dev = { + .name = DRIVER_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dx010_wdt_resources), + .resource = dx010_wdt_resources, + .dev = { + .release = dx010_wdt_dev_release, + } +}; + +static int dx010_wdt_start(struct watchdog_device *wdt_dev) +{ + struct dx010_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + unsigned char reset_ctrl = 0x00; + unsigned long gpio ,dir; + + mutex_lock(&drvdata->lock); + + gpio = inl(WDI_GPIO); + gpio |= 1 << 15; + outl(gpio, WDI_GPIO); + + outl((inl(WDI_GPIO_DIR) & (~(1 << 15))), WDI_GPIO_DIR); + + reset_ctrl = inb(RESET_CTRL); + + gpio = inl(WDI_GPIO); + gpio &= ~(1 << 15); + outl_p( gpio, WDI_GPIO ); + + mdelay(10); + + gpio = inl(WDI_GPIO); + gpio |= (1 << 15); + outl_p( gpio, WDI_GPIO ); + + reset_ctrl |= WDT_MASK; + outb(reset_ctrl, RESET_CTRL); + + mutex_unlock(&drvdata->lock); + + return 0; +} + +static int dx010_wdt_stop(struct watchdog_device *wdt_dev) +{ + struct dx010_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + unsigned long reset_ctrl; + + mutex_lock(&drvdata->lock); + + reset_ctrl = inb(RESET_CTRL); + reset_ctrl &= ~WDT_MASK; + outb(reset_ctrl, RESET_CTRL); + + mutex_unlock(&drvdata->lock); + + return 0; +} + +static int dx010_wdt_ping(struct watchdog_device *wdt_dev) +{ + struct dx010_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev); + unsigned long gpio; + + mutex_lock(&drvdata->lock); + + gpio = inl(WDI_GPIO); + gpio &= ~(1 << 15); + outl_p( gpio, WDI_GPIO ); + + mdelay(10); + + gpio = inl(WDI_GPIO); + gpio |= (1 << 15); + outl_p( gpio, WDI_GPIO ); + + mutex_unlock(&drvdata->lock); + + return 0; +} + +static const struct watchdog_info dx010_wdt_info = { + .options = WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, + .identity = "DX010 Watchdog", +}; + +static const struct watchdog_ops dx010_wdt_ops = { + .owner = THIS_MODULE, + .start = dx010_wdt_start, + .stop = dx010_wdt_stop, + .ping = dx010_wdt_ping, +}; + +static int dx010_wdt_probe(struct platform_device *pdev) +{ + struct dx010_wdt_drvdata *drvdata; + int ret; + + drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), + GFP_KERNEL); + if (!drvdata) { + ret = -ENOMEM; + goto err; + } + + mutex_init(&drvdata->lock); + + drvdata->wdt.info = &dx010_wdt_info; + drvdata->wdt.ops = &dx010_wdt_ops; + + watchdog_set_nowayout(&drvdata->wdt, nowayout); + watchdog_set_drvdata(&drvdata->wdt, drvdata); + + ret = watchdog_register_device(&drvdata->wdt); + if (ret != 0) { + dev_err(&pdev->dev, "watchdog_register_device() failed: %d\n", + ret); + goto err; + } + + platform_set_drvdata(pdev, drvdata); + +err: + return ret; +} + +static int dx010_wdt_remove(struct platform_device *pdev) +{ + struct dx010_wdt_drvdata *drvdata = platform_get_drvdata(pdev); + + watchdog_unregister_device(&drvdata->wdt); + + return 0; +} + +static struct platform_driver dx010_wdt_drv = { + .probe = dx010_wdt_probe, + .remove = dx010_wdt_remove, + .driver = { + .name = DRIVER_NAME, + }, +}; + +int dx010_wdt_init(void) +{ + platform_device_register(&dx010_wdt_dev); + platform_driver_register(&dx010_wdt_drv); + + return 0; +} + +void dx010_wdt_exit(void) +{ + platform_driver_unregister(&dx010_wdt_drv); + platform_device_unregister(&dx010_wdt_dev); +} + +module_init(dx010_wdt_init); +module_exit(dx010_wdt_exit); + +MODULE_AUTHOR("Abhisit Sangjan "); +MODULE_AUTHOR("Pariwat Leamsumran "); +MODULE_DESCRIPTION("Seastone DX010 Watchdog"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:dx010-watchdog"); diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/emc2305.c b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/emc2305.c new file mode 100644 index 000000000000..f08033e080ce --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/emc2305.c @@ -0,0 +1,877 @@ +/* + * emc2305.c - hwmon driver for SMSC EMC2305 fan controller + * (C) Copyright 2013 + * Reinhard Pfau, Guntermann & Drunck GmbH + * + * Based on emc2103 driver by SMSC. + * + * Datasheet available at: + * http://www.smsc.com/Downloads/SMSC/Downloads_Public/Data_Sheets/2305.pdf + * + * Also supports the EMC2303 fan controller which has the same functionality + * and register layout as EMC2305, but supports only up to 3 fans instead of 5. + * + * Also supports EMC2302 (up to 2 fans) and EMC2301 (1 fan) fan controller. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * TODO / IDEAS: + * - expose more of the configuration and features + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Addresses scanned. + * Listed in the same order as they appear in the EMC2305, EMC2303 data sheets. + * + * Note: these are the I2C adresses which are possible for EMC2305 and EMC2303 + * chips. + * The EMC2302 supports only 0x2e (EMC2302-1) and 0x2f (EMC2302-2). + * The EMC2301 supports only 0x2f. + */ +static const unsigned short i2c_adresses[] = { + 0x2E, + 0x2F, + 0x2C, + 0x2D, + 0x4C, + 0x4D, + I2C_CLIENT_END +}; + +/* + * global registers + */ +enum { + REG_CONFIGURATION = 0x20, + REG_FAN_STATUS = 0x24, + REG_FAN_STALL_STATUS = 0x25, + REG_FAN_SPIN_STATUS = 0x26, + REG_DRIVE_FAIL_STATUS = 0x27, + REG_FAN_INTERRUPT_ENABLE = 0x29, + REG_PWM_POLARITY_CONFIG = 0x2a, + REG_PWM_OUTPUT_CONFIG = 0x2b, + REG_PWM_BASE_FREQ_1 = 0x2c, + REG_PWM_BASE_FREQ_2 = 0x2d, + REG_SOFTWARE_LOCK = 0xef, + REG_PRODUCT_FEATURES = 0xfc, + REG_PRODUCT_ID = 0xfd, + REG_MANUFACTURER_ID = 0xfe, + REG_REVISION = 0xff +}; + +/* + * fan specific registers + */ +enum { + REG_FAN_SETTING = 0x30, + REG_PWM_DIVIDE = 0x31, + REG_FAN_CONFIGURATION_1 = 0x32, + REG_FAN_CONFIGURATION_2 = 0x33, + REG_GAIN = 0x35, + REG_FAN_SPIN_UP_CONFIG = 0x36, + REG_FAN_MAX_STEP = 0x37, + REG_FAN_MINIMUM_DRIVE = 0x38, + REG_FAN_VALID_TACH_COUNT = 0x39, + REG_FAN_DRIVE_FAIL_BAND_LOW = 0x3a, + REG_FAN_DRIVE_FAIL_BAND_HIGH = 0x3b, + REG_TACH_TARGET_LOW = 0x3c, + REG_TACH_TARGET_HIGH = 0x3d, + REG_TACH_READ_HIGH = 0x3e, + REG_TACH_READ_LOW = 0x3f, +}; + +#define SEL_FAN(fan, reg) (reg + fan * 0x10) + +/* + * Factor by equations [2] and [3] from data sheet; valid for fans where the + * number of edges equals (poles * 2 + 1). + */ +#define FAN_RPM_FACTOR 3932160 + + +struct emc2305_fan_data { + bool enabled; + bool valid; + unsigned long last_updated; + bool rpm_control; + u8 multiplier; + u8 poles; + u16 target; + u16 tach; + u16 rpm_factor; + u8 pwm; +}; + +struct emc2305_data { + struct device *hwmon_dev; + struct mutex update_lock; + int fans; + struct emc2305_fan_data fan[5]; +}; + +static int read_u8_from_i2c(struct i2c_client *client, u8 i2c_reg, u8 *output) +{ + int status = i2c_smbus_read_byte_data(client, i2c_reg); + if (status < 0) { + dev_warn(&client->dev, "reg 0x%02x, err %d\n", + i2c_reg, status); + } else { + *output = status; + } + return status; +} + +static void read_fan_from_i2c(struct i2c_client *client, u16 *output, + u8 hi_addr, u8 lo_addr) +{ + u8 high_byte, lo_byte; + + if (read_u8_from_i2c(client, hi_addr, &high_byte) < 0) + return; + + if (read_u8_from_i2c(client, lo_addr, &lo_byte) < 0) + return; + + *output = ((u16)high_byte << 5) | (lo_byte >> 3); +} + +static void write_fan_target_to_i2c(struct i2c_client *client, int fan, + u16 new_target) +{ + const u8 lo_reg = SEL_FAN(fan, REG_TACH_TARGET_LOW); + const u8 hi_reg = SEL_FAN(fan, REG_TACH_TARGET_HIGH); + u8 high_byte = (new_target & 0x1fe0) >> 5; + u8 low_byte = (new_target & 0x001f) << 3; + i2c_smbus_write_byte_data(client, lo_reg, low_byte); + i2c_smbus_write_byte_data(client, hi_reg, high_byte); +} + +static void read_fan_config_from_i2c(struct i2c_client *client, int fan) + +{ + struct emc2305_data *data = i2c_get_clientdata(client); + u8 conf1; + + if (read_u8_from_i2c(client, SEL_FAN(fan, REG_FAN_CONFIGURATION_1), + &conf1) < 0) + return; + + data->fan[fan].rpm_control = (conf1 & 0x80) != 0; + data->fan[fan].multiplier = 1 << ((conf1 & 0x60) >> 5); + data->fan[fan].poles = ((conf1 & 0x18) >> 3) + 1; +} + +static void read_fan_setting(struct i2c_client *client, int fan) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + u8 setting; + + if (read_u8_from_i2c(client, SEL_FAN(fan, REG_FAN_SETTING), + &setting) < 0) + return; + + data->fan[fan].pwm = setting; +} + +static void read_fan_data(struct i2c_client *client, int fan_idx) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + + read_fan_from_i2c(client, &data->fan[fan_idx].target, + SEL_FAN(fan_idx, REG_TACH_TARGET_HIGH), + SEL_FAN(fan_idx, REG_TACH_TARGET_LOW)); + read_fan_from_i2c(client, &data->fan[fan_idx].tach, + SEL_FAN(fan_idx, REG_TACH_READ_HIGH), + SEL_FAN(fan_idx, REG_TACH_READ_LOW)); +} + +static struct emc2305_fan_data * +emc2305_update_fan(struct i2c_client *client, int fan_idx) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan_data = &data->fan[fan_idx]; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, fan_data->last_updated + HZ + HZ / 2) + || !fan_data->valid) { + read_fan_config_from_i2c(client, fan_idx); + read_fan_data(client, fan_idx); + read_fan_setting(client, fan_idx); + fan_data->valid = true; + fan_data->last_updated = jiffies; + } + + mutex_unlock(&data->update_lock); + return fan_data; +} + +static struct emc2305_fan_data * +emc2305_update_device_fan(struct device *dev, struct device_attribute *da) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + + return emc2305_update_fan(client, fan_idx); +} + +/* + * set/ config functions + */ + +/* + * Note: we also update the fan target here, because its value is + * determined in part by the fan clock divider. This follows the principle + * of least surprise; the user doesn't expect the fan target to change just + * because the divider changed. + */ +static int +emc2305_set_fan_div(struct i2c_client *client, int fan_idx, long new_div) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan = emc2305_update_fan(client, fan_idx); + const u8 reg_conf1 = SEL_FAN(fan_idx, REG_FAN_CONFIGURATION_1); + int new_range_bits, old_div = 8 / fan->multiplier; + int status = 0; + + if (new_div == old_div) /* No change */ + return 0; + + switch (new_div) { + case 1: + new_range_bits = 3; + break; + case 2: + new_range_bits = 2; + break; + case 4: + new_range_bits = 1; + break; + case 8: + new_range_bits = 0; + break; + default: + return -EINVAL; + } + + mutex_lock(&data->update_lock); + + status = i2c_smbus_read_byte_data(client, reg_conf1); + if (status < 0) { + dev_dbg(&client->dev, "reg 0x%02x, err %d\n", + reg_conf1, status); + status = -EIO; + goto exit_unlock; + } + status &= 0x9F; + status |= (new_range_bits << 5); + status = i2c_smbus_write_byte_data(client, reg_conf1, status); + if (status < 0) { + status = -EIO; + goto exit_invalidate; + } + + fan->multiplier = 8 / new_div; + + /* update fan target if high byte is not disabled */ + if ((fan->target & 0x1fe0) != 0x1fe0) { + u16 new_target = (fan->target * old_div) / new_div; + fan->target = min_t(u16, new_target, 0x1fff); + write_fan_target_to_i2c(client, fan_idx, fan->target); + } + +exit_invalidate: + /* invalidate fan data to force re-read from hardware */ + fan->valid = false; +exit_unlock: + mutex_unlock(&data->update_lock); + return status; +} + +static int +emc2305_set_fan_target(struct i2c_client *client, int fan_idx, long rpm_target) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan = emc2305_update_fan(client, fan_idx); + + /* + * Datasheet states 16000 as maximum RPM target + * (table 2.2 and section 4.3) + */ + if ((rpm_target < 0) || (rpm_target > 16000)) + return -EINVAL; + + mutex_lock(&data->update_lock); + + if (rpm_target == 0) + fan->target = 0x1fff; + else + fan->target = clamp_val( + (FAN_RPM_FACTOR * fan->multiplier) / rpm_target, + 0, 0x1fff); + + write_fan_target_to_i2c(client, fan_idx, fan->target); + + mutex_unlock(&data->update_lock); + return 0; +} + +static int +emc2305_set_pwm_enable(struct i2c_client *client, int fan_idx, long enable) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan = emc2305_update_fan(client, fan_idx); + const u8 reg_fan_conf1 = SEL_FAN(fan_idx, REG_FAN_CONFIGURATION_1); + int status = 0; + u8 conf_reg; + + mutex_lock(&data->update_lock); + switch (enable) { + case 0: + fan->rpm_control = false; + break; + case 3: + fan->rpm_control = true; + break; + default: + status = -EINVAL; + goto exit_unlock; + } + + status = read_u8_from_i2c(client, reg_fan_conf1, &conf_reg); + if (status < 0) { + status = -EIO; + goto exit_unlock; + } + + if (fan->rpm_control) + conf_reg |= 0x80; + else + conf_reg &= ~0x80; + + status = i2c_smbus_write_byte_data(client, reg_fan_conf1, conf_reg); + if (status < 0) + status = -EIO; + +exit_unlock: + mutex_unlock(&data->update_lock); + return status; +} + +static int +emc2305_set_pwm(struct i2c_client *client, int fan_idx, long pwm) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan = emc2305_update_fan(client, fan_idx); + const u8 reg_fan_setting = SEL_FAN(fan_idx, REG_FAN_SETTING); + int status = 0; + + /* + * Datasheet states 255 as maximum PWM + * (section 5.7) + */ + if ((pwm < 0) || (pwm > 255)) + return -EINVAL; + + fan->pwm = pwm; + + mutex_lock(&data->update_lock); + + status = i2c_smbus_write_byte_data(client, reg_fan_setting, fan->pwm); + + mutex_unlock(&data->update_lock); + return status; +} +/* + * sysfs callback functions + * + * Note: + * Naming of the funcs is modelled after the naming scheme described in + * Documentation/hwmon/sysfs-interface: + * + * For a sysfs file _ the functions are named like this: + * the show function: show__ + * the store function: set__ + * For read only (RO) attributes of course only the show func is required. + * + * This convention allows us to define the sysfs attributes by using macros. + */ + +static ssize_t +show_fan_input(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + int rpm = 0; + if (fan->tach != 0) + rpm = (FAN_RPM_FACTOR * fan->multiplier) / fan->tach; + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t +show_fan_fault(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + bool fault = ((fan->tach & 0x1fe0) == 0x1fe0); + return sprintf(buf, "%d\n", fault ? 1 : 0); +} + +static ssize_t +show_fan_div(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + int fan_div = 8 / fan->multiplier; + return sprintf(buf, "%d\n", fan_div); +} + +static ssize_t +set_fan_div(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + long new_div; + int status; + + status = kstrtol(buf, 10, &new_div); + if (status < 0) + return -EINVAL; + + status = emc2305_set_fan_div(client, fan_idx, new_div); + if (status < 0) + return status; + + return count; +} + +static ssize_t +show_fan_target(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + int rpm = 0; + + /* high byte of 0xff indicates disabled so return 0 */ + if ((fan->target != 0) && ((fan->target & 0x1fe0) != 0x1fe0)) + rpm = (FAN_RPM_FACTOR * fan->multiplier) + / fan->target; + + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t set_fan_target(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + long rpm_target; + int status; + + status = kstrtol(buf, 10, &rpm_target); + if (status < 0) + return -EINVAL; + + status = emc2305_set_fan_target(client, fan_idx, rpm_target); + if (status < 0) + return status; + + return count; +} + +static ssize_t +show_pwm_enable(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + return sprintf(buf, "%d\n", fan->rpm_control ? 3 : 0); +} + +static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + long new_value; + int status; + + status = kstrtol(buf, 10, &new_value); + if (status < 0) + return -EINVAL; + status = emc2305_set_pwm_enable(client, fan_idx, new_value); + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + return sprintf(buf, "%d\n", fan->pwm); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + unsigned long val; + int ret; + int status; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + if (val > 255) + return -EINVAL; + + status = emc2305_set_pwm(client, fan_idx, val); + return count; +} + +/* define a read only attribute */ +#define EMC2305_ATTR_RO(_type, _item, _num) \ + SENSOR_ATTR(_type ## _num ## _ ## _item, S_IRUGO, \ + show_## _type ## _ ## _item, NULL, _num - 1) + +/* define a read/write attribute */ +#define EMC2305_ATTR_RW(_type, _item, _num) \ + SENSOR_ATTR(_type ## _num ## _ ## _item, S_IRUGO | S_IWUSR, \ + show_## _type ##_ ## _item, \ + set_## _type ## _ ## _item, _num - 1) + +/* + * TODO: Ugly hack, but temporary as this whole logic needs + * to be rewritten as per standard HWMON sysfs registration + */ + +/* define a read/write attribute */ +#define EMC2305_ATTR_RW2(_type, _num) \ + SENSOR_ATTR(_type ## _num, S_IRUGO | S_IWUSR, \ + show_## _type, set_## _type, _num - 1) + +/* defines the attributes for a single fan */ +#define EMC2305_DEFINE_FAN_ATTRS(_num) \ + static const \ + struct sensor_device_attribute emc2305_attr_fan ## _num[] = { \ + EMC2305_ATTR_RO(fan, input, _num), \ + EMC2305_ATTR_RO(fan, fault, _num), \ + EMC2305_ATTR_RW(fan, div, _num), \ + EMC2305_ATTR_RW(fan, target, _num), \ + EMC2305_ATTR_RW(pwm, enable, _num), \ + EMC2305_ATTR_RW2(pwm, _num) \ + } + +#define EMC2305_NUM_FAN_ATTRS ARRAY_SIZE(emc2305_attr_fan1) + +/* common attributes for EMC2303 and EMC2305 */ +static const struct sensor_device_attribute emc2305_attr_common[] = { +}; + +/* fan attributes for the single fans */ +EMC2305_DEFINE_FAN_ATTRS(1); +EMC2305_DEFINE_FAN_ATTRS(2); +EMC2305_DEFINE_FAN_ATTRS(3); +EMC2305_DEFINE_FAN_ATTRS(4); +EMC2305_DEFINE_FAN_ATTRS(5); +EMC2305_DEFINE_FAN_ATTRS(6); + +/* fan attributes */ +static const struct sensor_device_attribute *emc2305_fan_attrs[] = { + emc2305_attr_fan1, + emc2305_attr_fan2, + emc2305_attr_fan3, + emc2305_attr_fan4, + emc2305_attr_fan5, +}; + +/* + * driver interface + */ + +static int emc2305_remove(struct i2c_client *client) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + int fan_idx, i; + + hwmon_device_unregister(data->hwmon_dev); + + for (fan_idx = 0; fan_idx < data->fans; ++fan_idx) + for (i = 0; i < EMC2305_NUM_FAN_ATTRS; ++i) + device_remove_file( + &client->dev, + &emc2305_fan_attrs[fan_idx][i].dev_attr); + + for (i = 0; i < ARRAY_SIZE(emc2305_attr_common); ++i) + device_remove_file(&client->dev, + &emc2305_attr_common[i].dev_attr); + + kfree(data); + return 0; +} + + +#ifdef CONFIG_OF +/* + * device tree support + */ + +struct of_fan_attribute { + const char *name; + int (*set)(struct i2c_client*, int, long); +}; + +struct of_fan_attribute of_fan_attributes[] = { + {"fan-div", emc2305_set_fan_div}, + {"fan-target", emc2305_set_fan_target}, + {"pwm-enable", emc2305_set_pwm_enable}, + {NULL, NULL} +}; + +static int emc2305_config_of(struct i2c_client *client) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct device_node *node; + unsigned int fan_idx; + + if (!client->dev.of_node) + return -EINVAL; + if (!of_get_next_child(client->dev.of_node, NULL)) + return 0; + + for (fan_idx = 0; fan_idx < data->fans; ++fan_idx) + data->fan[fan_idx].enabled = false; + + for_each_child_of_node(client->dev.of_node, node) { + const __be32 *property; + int len; + struct of_fan_attribute *attr; + + property = of_get_property(node, "reg", &len); + if (!property || len != sizeof(int)) { + dev_err(&client->dev, "invalid reg on %s\n", + node->full_name); + continue; + } + + fan_idx = be32_to_cpup(property); + if (fan_idx >= data->fans) { + dev_err(&client->dev, + "invalid fan index %d on %s\n", + fan_idx, node->full_name); + continue; + } + + data->fan[fan_idx].enabled = true; + + for (attr = of_fan_attributes; attr->name; ++attr) { + int status = 0; + long value; + property = of_get_property(node, attr->name, &len); + if (!property) + continue; + if (len != sizeof(int)) { + dev_err(&client->dev, "invalid %s on %s\n", + attr->name, node->full_name); + continue; + } + value = be32_to_cpup(property); + status = attr->set(client, fan_idx, value); + if (status == -EINVAL) { + dev_err(&client->dev, + "invalid value for %s on %s\n", + attr->name, node->full_name); + } + } + } + + return 0; +} + +#endif + +static void emc2305_get_config(struct i2c_client *client) +{ + int i; + struct emc2305_data *data = i2c_get_clientdata(client); + + for (i = 0; i < data->fans; ++i) { + data->fan[i].enabled = true; + emc2305_update_fan(client, i); + } + +#ifdef CONFIG_OF + emc2305_config_of(client); +#endif + +} + +static int +emc2305_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct emc2305_data *data; + int status; + int i; + int fan_idx; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + data = kzalloc(sizeof(struct emc2305_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + status = i2c_smbus_read_byte_data(client, REG_PRODUCT_ID); + switch (status) { + case 0x34: /* EMC2305 */ + data->fans = 5; + break; + case 0x35: /* EMC2303 */ + data->fans = 3; + break; + case 0x36: /* EMC2302 */ + data->fans = 2; + break; + case 0x37: /* EMC2301 */ + data->fans = 1; + break; + default: + if (status >= 0) + status = -EINVAL; + goto exit_free; + } + + emc2305_get_config(client); + + for (i = 0; i < ARRAY_SIZE(emc2305_attr_common); ++i) { + status = device_create_file(&client->dev, + &emc2305_attr_common[i].dev_attr); + if (status) + goto exit_remove; + } + for (fan_idx = 0; fan_idx < data->fans; ++fan_idx) + for (i = 0; i < EMC2305_NUM_FAN_ATTRS; ++i) { + if (!data->fan[fan_idx].enabled) + continue; + status = device_create_file( + &client->dev, + &emc2305_fan_attrs[fan_idx][i].dev_attr); + if (status) + goto exit_remove_fans; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove_fans; + } + + dev_info(&client->dev, "%s: sensor '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove_fans: + for (fan_idx = 0; fan_idx < data->fans; ++fan_idx) + for (i = 0; i < EMC2305_NUM_FAN_ATTRS; ++i) + device_remove_file( + &client->dev, + &emc2305_fan_attrs[fan_idx][i].dev_attr); + +exit_remove: + for (i = 0; i < ARRAY_SIZE(emc2305_attr_common); ++i) + device_remove_file(&client->dev, + &emc2305_attr_common[i].dev_attr); +exit_free: + kfree(data); + return status; +} + +static const struct i2c_device_id emc2305_id[] = { + { "emc2305", 0 }, + { "emc2303", 0 }, + { "emc2302", 0 }, + { "emc2301", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, emc2305_id); + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int +emc2305_detect(struct i2c_client *new_client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + int manufacturer, product; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + manufacturer = + i2c_smbus_read_byte_data(new_client, REG_MANUFACTURER_ID); + if (manufacturer != 0x5D) + return -ENODEV; + + product = i2c_smbus_read_byte_data(new_client, REG_PRODUCT_ID); + + switch (product) { + case 0x34: + strlcpy(info->type, "emc2305", I2C_NAME_SIZE); + break; + case 0x35: + strlcpy(info->type, "emc2303", I2C_NAME_SIZE); + break; + case 0x36: + strlcpy(info->type, "emc2302", I2C_NAME_SIZE); + break; + case 0x37: + strlcpy(info->type, "emc2301", I2C_NAME_SIZE); + break; + default: + return -ENODEV; + } + + return 0; +} + +static struct i2c_driver emc2305_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "emc2305", + }, + .probe = emc2305_probe, + .remove = emc2305_remove, + .id_table = emc2305_id, +/* + .detect = emc2305_detect, + .address_list = i2c_adresses, +*/ +}; + +module_i2c_driver(emc2305_driver); + +MODULE_AUTHOR("Reinhard Pfau "); +MODULE_DESCRIPTION("SMSC EMC2305 hwmon driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/leds-dx010.c b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/leds-dx010.c new file mode 100644 index 000000000000..fac8322f06b0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/leds-dx010.c @@ -0,0 +1,289 @@ +/* + * leds-dx010-status.c - Driver for Seastone DX010 front panel LEDs + * + * Copyright (C) 2017 Celestica Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include + +#define DRIVER_NAME "leds_dx010" +#define FRONT_LED_STAT 0x303 + +static int dx010_led_blink_stat(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + unsigned char led; + + if (!(*delay_on == 0 && *delay_off == 0) && + !(*delay_on == 250 && *delay_off == 250) && + !(*delay_on == 500 && *delay_off == 500)) + return -EINVAL; + + led = inb(FRONT_LED_STAT); + led &= 0xfc; + + if ((*delay_on == 250) && (*delay_off == 250)) + led |= 0x02; + else if ((*delay_on == 500) && (*delay_off == 500)) + led |= 0x01; + + outb(led, FRONT_LED_STAT); + + return 0; +} + +static ssize_t dx010_led_blink_show_stat(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct led_classdev *leddev = dev_get_drvdata(dev); + unsigned char led; + const char *msg; + + led = inb(FRONT_LED_STAT); + led &= 0x03; + + switch (led) + { + case 0: + msg = "No blinking, turn on"; + break; + case 1: + msg = "1 Hz is blinking"; + break; + case 2: + msg = "4 Hz is blinking"; + break; + case 3: + msg = "No blinking, turn off"; + break; + default: + msg = "Unknown error"; + break; + } + + return sprintf(buf, "%s\n", msg); +} + +static ssize_t dx010_led_blink_store_stat(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int ret; + struct led_classdev *leddev = dev_get_drvdata(dev); + unsigned long blink_state; + unsigned char led; + + ret = kstrtoul(buf, 10, &blink_state); + if (ret) + return ret; + + led = inb(FRONT_LED_STAT); + led &= 0xfc; + + switch (blink_state) + { + case 0: + led |= 0x03; + break; + case 1: + break; + case 250: + led |= 0x02; + break; + case 500: + led |= 0x01; + break; + default: + return -EINVAL; + break; + } + + outb(led, FRONT_LED_STAT); + + return size; +} +static DEVICE_ATTR(blink, 0644, dx010_led_blink_show_stat, dx010_led_blink_store_stat); + +static void dx010_led_brightness_set_stat(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + unsigned char led; + + led = inb(FRONT_LED_STAT); + led &= 0xfc; + + if (!brightness) + led |= 0x03; + + outb( led, FRONT_LED_STAT); +} + +enum led_brightness dx010_led_brightness_get_p2(struct led_classdev *led_cdev) +{ + unsigned char led; + + led = inb(FRONT_LED_STAT); + + return (led & 0x08) ? LED_OFF : LED_FULL; +} + +static void dx010_led_brightness_set_p2(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + unsigned char led; + + led = inb(FRONT_LED_STAT); + led &= 0xf7; + + if (!brightness) + led |= 0x08; + + outb( led, FRONT_LED_STAT); +} + +enum led_brightness dx010_led_brightness_get_p1(struct led_classdev *led_cdev) +{ + unsigned char led; + + led = inb(FRONT_LED_STAT); + + return (led & 0x04) ? LED_OFF : LED_FULL; +} + +static void dx010_led_brightness_set_p1(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + unsigned char led; + + led = inb(FRONT_LED_STAT); + led &= 0xfb; + + if (!brightness) + led |= 0x04; + + outb( led, FRONT_LED_STAT); +} + +static struct led_classdev dx010_leds[] = { + { + .name = "dx010:green:p-1", + .brightness = LED_OFF, + .max_brightness = 1, + .brightness_get = dx010_led_brightness_get_p1, + .brightness_set = dx010_led_brightness_set_p1, + }, + { + .name = "dx010:green:p-2", + .brightness = LED_OFF, + .max_brightness = 1, + .brightness_get = dx010_led_brightness_get_p2, + .brightness_set = dx010_led_brightness_set_p2, + }, + { + .name = "dx010:green:stat", + .brightness = LED_OFF, + .max_brightness = 1, + .brightness_set = dx010_led_brightness_set_stat, + .blink_set = dx010_led_blink_stat, + .flags = LED_CORE_SUSPENDRESUME, + }, +}; + +static struct resource dx010_led_resources[] = { + { + .flags = IORESOURCE_IO, + }, +}; + +static void dx010_led_dev_release( struct device * dev) +{ + return; +} + +static struct platform_device dx010_lpc_dev = { + .name = DRIVER_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(dx010_led_resources), + .resource = dx010_led_resources, + .dev = { + .release = dx010_led_dev_release, + } +}; + +static int dx010_led_drv_probe(struct platform_device *pdev) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(dx010_leds); i++) { + ret = led_classdev_register(&pdev->dev, &dx010_leds[i]); + if (ret < 0) + goto exit; + } + + ret = device_create_file(&pdev->dev, &dev_attr_blink); + if (ret) + { + for (i = 0; i < ARRAY_SIZE(dx010_leds); i++) + led_classdev_unregister(&dx010_leds[i]); + } +exit: + return ret; +} + +static int dx010_led_drv_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(dx010_leds); i++) + led_classdev_unregister(&dx010_leds[i]); + + device_remove_file(&pdev->dev, &dev_attr_blink); + + return 0; +} + +static struct platform_driver dx010_led_drv = { + .probe = dx010_led_drv_probe, + .remove = __exit_p(dx010_led_drv_remove), + .driver = { + .name = DRIVER_NAME, + }, +}; + +int dx010_led_init(void) +{ + platform_device_register(&dx010_lpc_dev); + platform_driver_register(&dx010_led_drv); + + return 0; +} + +void dx010_led_exit(void) +{ + platform_driver_unregister(&dx010_led_drv); + platform_device_unregister(&dx010_lpc_dev); +} + +module_init(dx010_led_init); +module_exit(dx010_led_exit); + +MODULE_AUTHOR("Abhisit Sangjan "); +MODULE_DESCRIPTION("Celestica SeaStone DX010 LEDs Front Panel Status Driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c new file mode 100644 index 000000000000..a83745212bbf --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c @@ -0,0 +1,553 @@ +/* + * lm75.c - Part of lm_sensors, Linux kernel modules for hardware + * monitoring + * Copyright (c) 1998, 1999 Frodo Looijaard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "lm75.h" + + +/* + * This driver handles the LM75 and compatible digital temperature sensors. + */ + +enum lm75_type { /* keep sorted in alphabetical order */ + adt75, + ds1775, + ds75, + ds7505, + g751, + lm75, + lm75a, + lm75b, + max6625, + max6626, + mcp980x, + stds75, + tcn75, + tmp100, + tmp101, + tmp105, + tmp112, + tmp175, + tmp275, + tmp75, +}; + +/* Addresses scanned */ +static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, + 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; + + +/* The LM75 registers */ +#define LM75_REG_CONF 0x01 +static const u8 LM75_REG_TEMP[3] = { + 0x00, /* input */ + 0x03, /* max */ + 0x02, /* hyst */ +}; + +/* Each client has this additional data */ +struct lm75_data { + struct i2c_client *client; + struct device *hwmon_dev; + struct thermal_zone_device *tz; + struct mutex update_lock; + u8 orig_conf; + u8 resolution; /* In bits, between 9 and 12 */ + u8 resolution_limits; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + unsigned long sample_time; /* In jiffies */ + s16 temp[3]; /* Register values, + 0 = input + 1 = max + 2 = hyst */ +}; + +static int lm75_read_value(struct i2c_client *client, u8 reg); +static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); +static struct lm75_data *lm75_update_device(struct device *dev); + + +/*-----------------------------------------------------------------------*/ + +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + +/* sysfs attributes for hwmon */ + +static int lm75_read_temp(void *dev, long *temp) +{ + struct lm75_data *data = lm75_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + *temp = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + +static ssize_t show_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct lm75_data *data = lm75_update_device(dev); + + if (IS_ERR(data)) + return PTR_ERR(data); + + return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], + data->resolution)); +} + +static ssize_t set_temp(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct lm75_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = attr->index; + long temp; + int error; + u8 resolution; + + error = kstrtol(buf, 10, &temp); + if (error) + return error; + + /* + * Resolution of limit registers is assumed to be the same as the + * temperature input register resolution unless given explicitly. + */ + if (attr->index && data->resolution_limits) + resolution = data->resolution_limits; + else + resolution = data->resolution; + + mutex_lock(&data->update_lock); + temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); + data->temp[nr] = DIV_ROUND_CLOSEST(temp << (resolution - 8), + 1000) << (16 - resolution); + lm75_write_value(client, LM75_REG_TEMP[nr], data->temp[nr]); + mutex_unlock(&data->update_lock); + return count; +} + +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_temp, set_temp, 1); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, + show_temp, set_temp, 2); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); + +static struct attribute *lm75_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + + NULL +}; +ATTRIBUTE_GROUPS(lm75); + +/*-----------------------------------------------------------------------*/ + +/* device probe and removal */ + +static int +lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct lm75_data *data; + int status; + u8 set_mask, clr_mask; + int new; + enum lm75_type kind = id->driver_data; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -EIO; + + data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->client = client; + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* Set to LM75 resolution (9 bits, 1/2 degree C) and range. + * Then tweak to be more precise when appropriate. + */ + set_mask = 0; + clr_mask = LM75_SHUTDOWN; /* continuous conversions */ + + switch (kind) { + case adt75: + clr_mask |= 1 << 5; /* not one-shot mode */ + data->resolution = 12; + data->sample_time = HZ / 8; + break; + case ds1775: + case ds75: + case stds75: + clr_mask |= 3 << 5; + set_mask |= 2 << 5; /* 11-bit mode */ + data->resolution = 11; + data->sample_time = HZ; + break; + case ds7505: + set_mask |= 3 << 5; /* 12-bit mode */ + data->resolution = 12; + data->sample_time = HZ / 4; + break; + case g751: + case lm75: + case lm75a: + data->resolution = 9; + data->sample_time = HZ / 2; + break; + case lm75b: + data->resolution = 11; + data->sample_time = HZ / 4; + break; + case max6625: + data->resolution = 9; + data->sample_time = HZ / 4; + break; + case max6626: + data->resolution = 12; + data->resolution_limits = 9; + data->sample_time = HZ / 4; + break; + case tcn75: + data->resolution = 9; + data->sample_time = HZ / 8; + break; + case mcp980x: + data->resolution_limits = 9; + /* fall through */ + case tmp100: + case tmp101: + set_mask |= 3 << 5; /* 12-bit mode */ + data->resolution = 12; + data->sample_time = HZ; + clr_mask |= 1 << 7; /* not one-shot mode */ + break; + case tmp112: + set_mask |= 3 << 5; /* 12-bit mode */ + clr_mask |= 1 << 7; /* not one-shot mode */ + data->resolution = 12; + data->sample_time = HZ / 4; + break; + case tmp105: + case tmp175: + case tmp275: + case tmp75: + set_mask |= 3 << 5; /* 12-bit mode */ + clr_mask |= 1 << 7; /* not one-shot mode */ + data->resolution = 12; + data->sample_time = HZ / 2; + break; + } + + /* configure as specified */ + status = lm75_read_value(client, LM75_REG_CONF); + if (status < 0) { + dev_dbg(dev, "Can't read config? %d\n", status); + return status; + } + data->orig_conf = status; + new = status & ~clr_mask; + new |= set_mask; + if (status != new) + lm75_write_value(client, LM75_REG_CONF, new); + dev_dbg(dev, "Config %02x\n", new); + + data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name, + data, lm75_groups); + if (IS_ERR(data->hwmon_dev)) + return PTR_ERR(data->hwmon_dev); + + data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, + 0, + data->hwmon_dev, + lm75_read_temp, NULL); + if (IS_ERR(data->tz)) + data->tz = NULL; + + dev_info(dev, "%s: sensor '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; +} + +static int lm75_remove(struct i2c_client *client) +{ + struct lm75_data *data = i2c_get_clientdata(client); + + thermal_zone_of_sensor_unregister(data->hwmon_dev, data->tz); + hwmon_device_unregister(data->hwmon_dev); + lm75_write_value(client, LM75_REG_CONF, data->orig_conf); + return 0; +} + +static const struct i2c_device_id lm75_ids[] = { + { "adt75", adt75, }, + { "ds1775", ds1775, }, + { "ds75", ds75, }, + { "ds7505", ds7505, }, + { "g751", g751, }, + { "lm75", lm75, }, + { "lm75a", lm75a, }, + { "dx010_lm75b", lm75b, }, + { "max6625", max6625, }, + { "max6626", max6626, }, + { "mcp980x", mcp980x, }, + { "stds75", stds75, }, + { "tcn75", tcn75, }, + { "tmp100", tmp100, }, + { "tmp101", tmp101, }, + { "tmp105", tmp105, }, + { "tmp112", tmp112, }, + { "tmp175", tmp175, }, + { "tmp275", tmp275, }, + { "tmp75", tmp75, }, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, lm75_ids); + +#define LM75A_ID 0xA1 + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int lm75_detect(struct i2c_client *new_client, + struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + int i; + int conf, hyst, os; + bool is_lm75a = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + /* + * Now, we do the remaining detection. There is no identification- + * dedicated register so we have to rely on several tricks: + * unused bits, registers cycling over 8-address boundaries, + * addresses 0x04-0x07 returning the last read value. + * The cycling+unused addresses combination is not tested, + * since it would significantly slow the detection down and would + * hardly add any value. + * + * The National Semiconductor LM75A is different than earlier + * LM75s. It has an ID byte of 0xaX (where X is the chip + * revision, with 1 being the only revision in existence) in + * register 7, and unused registers return 0xff rather than the + * last read value. + * + * Note that this function only detects the original National + * Semiconductor LM75 and the LM75A. Clones from other vendors + * aren't detected, on purpose, because they are typically never + * found on PC hardware. They are found on embedded designs where + * they can be instantiated explicitly so detection is not needed. + * The absence of identification registers on all these clones + * would make their exhaustive detection very difficult and weak, + * and odds are that the driver would bind to unsupported devices. + */ + + /* Unused bits */ + conf = i2c_smbus_read_byte_data(new_client, 1); + if (conf & 0xe0) + return -ENODEV; + + /* First check for LM75A */ + if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) { + /* LM75A returns 0xff on unused registers so + just to be sure we check for that too. */ + if (i2c_smbus_read_byte_data(new_client, 4) != 0xff + || i2c_smbus_read_byte_data(new_client, 5) != 0xff + || i2c_smbus_read_byte_data(new_client, 6) != 0xff) + return -ENODEV; + is_lm75a = 1; + hyst = i2c_smbus_read_byte_data(new_client, 2); + os = i2c_smbus_read_byte_data(new_client, 3); + } else { /* Traditional style LM75 detection */ + /* Unused addresses */ + hyst = i2c_smbus_read_byte_data(new_client, 2); + if (i2c_smbus_read_byte_data(new_client, 4) != hyst + || i2c_smbus_read_byte_data(new_client, 5) != hyst + || i2c_smbus_read_byte_data(new_client, 6) != hyst + || i2c_smbus_read_byte_data(new_client, 7) != hyst) + return -ENODEV; + os = i2c_smbus_read_byte_data(new_client, 3); + if (i2c_smbus_read_byte_data(new_client, 4) != os + || i2c_smbus_read_byte_data(new_client, 5) != os + || i2c_smbus_read_byte_data(new_client, 6) != os + || i2c_smbus_read_byte_data(new_client, 7) != os) + return -ENODEV; + } + + /* Addresses cycling */ + for (i = 8; i <= 248; i += 40) { + if (i2c_smbus_read_byte_data(new_client, i + 1) != conf + || i2c_smbus_read_byte_data(new_client, i + 2) != hyst + || i2c_smbus_read_byte_data(new_client, i + 3) != os) + return -ENODEV; + if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7) + != LM75A_ID) + return -ENODEV; + } + + strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE); + + return 0; +} + +#ifdef CONFIG_PM +static int lm75_suspend(struct device *dev) +{ + int status; + struct i2c_client *client = to_i2c_client(dev); + status = lm75_read_value(client, LM75_REG_CONF); + if (status < 0) { + dev_dbg(&client->dev, "Can't read config? %d\n", status); + return status; + } + status = status | LM75_SHUTDOWN; + lm75_write_value(client, LM75_REG_CONF, status); + return 0; +} + +static int lm75_resume(struct device *dev) +{ + int status; + struct i2c_client *client = to_i2c_client(dev); + status = lm75_read_value(client, LM75_REG_CONF); + if (status < 0) { + dev_dbg(&client->dev, "Can't read config? %d\n", status); + return status; + } + status = status & ~LM75_SHUTDOWN; + lm75_write_value(client, LM75_REG_CONF, status); + return 0; +} + +static const struct dev_pm_ops lm75_dev_pm_ops = { + .suspend = lm75_suspend, + .resume = lm75_resume, +}; +#define LM75_DEV_PM_OPS (&lm75_dev_pm_ops) +#else +#define LM75_DEV_PM_OPS NULL +#endif /* CONFIG_PM */ + +static struct i2c_driver lm75_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "dx010_lm75", + .pm = LM75_DEV_PM_OPS, + }, + .probe = lm75_probe, + .remove = lm75_remove, + .id_table = lm75_ids, +/* + .detect = lm75_detect, + .address_list = normal_i2c, +*/ +}; + +/*-----------------------------------------------------------------------*/ + +/* register access */ + +/* + * All registers are word-sized, except for the configuration register. + * LM75 uses a high-byte first convention, which is exactly opposite to + * the SMBus standard. + */ +static int lm75_read_value(struct i2c_client *client, u8 reg) +{ + if (reg == LM75_REG_CONF) + return i2c_smbus_read_byte_data(client, reg); + else + return i2c_smbus_read_word_swapped(client, reg); +} + +static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if (reg == LM75_REG_CONF) + return i2c_smbus_write_byte_data(client, reg, value); + else + return i2c_smbus_write_word_swapped(client, reg, value); +} + +static struct lm75_data *lm75_update_device(struct device *dev) +{ + struct lm75_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + struct lm75_data *ret = data; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + data->sample_time) + || !data->valid) { + int i; + dev_dbg(&client->dev, "Starting lm75 update\n"); + + for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + int status; + + status = lm75_read_value(client, LM75_REG_TEMP[i]); + if (unlikely(status < 0)) { + dev_dbg(dev, + "LM75: Failed to read value: reg %d, error %d\n", + LM75_REG_TEMP[i], status); + ret = ERR_PTR(status); + data->valid = 0; + goto abort; + } + data->temp[i] = status; + } + data->last_updated = jiffies; + data->valid = 1; + } + +abort: + mutex_unlock(&data->update_lock); + return ret; +} + +module_i2c_driver(lm75_driver); + +MODULE_AUTHOR("Frodo Looijaard "); +MODULE_DESCRIPTION("LM75 driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h new file mode 100644 index 000000000000..5cde94e56f17 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h @@ -0,0 +1,49 @@ +/* + lm75.h - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 2003 Mark M. Hoffman + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + This file contains common code for encoding/decoding LM75 type + temperature readings, which are emulated by many of the chips + we support. As the user is unlikely to load more than one driver + which contains this code, we don't worry about the wasted space. +*/ + +#include + +/* straight from the datasheet */ +#define LM75_TEMP_MIN (-55000) +#define LM75_TEMP_MAX 125000 +#define LM75_SHUTDOWN 0x01 + +/* TEMP: 0.001C/bit (-55C to +125C) + REG: (0.5C/bit, two's complement) << 7 */ +static inline u16 LM75_TEMP_TO_REG(long temp) +{ + int ntemp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); + ntemp += (ntemp < 0 ? -250 : 250); + return (u16)((ntemp / 500) << 7); +} + +static inline int LM75_TEMP_FROM_REG(u16 reg) +{ + /* use integer division instead of equivalent right shift to + guarantee arithmetic shift and preserve the sign */ + return ((s16)reg / 128) * 500; +} diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/mc24lc64t.c b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/mc24lc64t.c new file mode 100644 index 000000000000..a391056d09a7 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/mc24lc64t.c @@ -0,0 +1,142 @@ +/* + * mc24lc64t.c - driver for Microchip 24LC64T + * + * Copyright (C) 2017 Celestica Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct mc24lc64t_data { + struct i2c_client *fake_client; + struct mutex update_lock; +}; + +static ssize_t mc24lc64t_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = kobj_to_i2c_client(kobj); + struct mc24lc64t_data *drvdata = i2c_get_clientdata(client); + unsigned long timeout, read_time, i = 0; + int status; + + mutex_lock(&drvdata->update_lock); + + if (i2c_smbus_write_byte_data(client, off>>8, off)) + { + status = -EIO; + goto exit; + } + + msleep(1); + +begin: + + if (i < count) + { + timeout = jiffies + msecs_to_jiffies(25); /* 25 mS timeout*/ + do { + read_time = jiffies; + + status = i2c_smbus_read_byte(client); + if (status >= 0) + { + buf[i++] = status; + goto begin; + } + } while (time_before(read_time, timeout)); + + status = -ETIMEDOUT; + goto exit; + } + + status = count; + +exit: + mutex_unlock(&drvdata->update_lock); + + return status; +} + +static struct bin_attribute mc24lc64t_bit_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = 65536, + .read = mc24lc64t_read, +}; + +static int mc24lc64t_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct mc24lc64t_data *drvdata; + int err; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA + | I2C_FUNC_SMBUS_READ_BYTE)) + return -EPFNOSUPPORT; + + if (!(drvdata = devm_kzalloc(&client->dev, + sizeof(struct mc24lc64t_data), GFP_KERNEL))) + return -ENOMEM; + + drvdata->fake_client = i2c_new_dummy(client->adapter, client->addr + 1); + if (!drvdata->fake_client) + return -ENOMEM; + + i2c_set_clientdata(client, drvdata); + mutex_init(&drvdata->update_lock); + + err = sysfs_create_bin_file(&client->dev.kobj, &mc24lc64t_bit_attr); + if (err) + i2c_unregister_device(drvdata->fake_client); + + return err; +} + +static int mc24lc64t_remove(struct i2c_client *client) +{ + struct mc24lc64t_data *drvdata = i2c_get_clientdata(client); + + i2c_unregister_device(drvdata->fake_client); + + sysfs_remove_bin_file(&client->dev.kobj, &mc24lc64t_bit_attr); + + return 0; +} + +static const struct i2c_device_id mc24lc64t_id[] = { + { "24lc64t", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mc24lc64t_id); + +static struct i2c_driver mc24lc64t_driver = { + .driver = { + .name = "mc24lc64t", + .owner = THIS_MODULE, + }, + .probe = mc24lc64t_probe, + .remove = mc24lc64t_remove, + .id_table = mc24lc64t_id, +}; + +module_i2c_driver(mc24lc64t_driver); + +MODULE_AUTHOR("Abhisit Sangjan "); +MODULE_DESCRIPTION("Microchip 24LC64T Driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/scripts/dx010_check_qsfp.sh b/platform/broadcom/sonic-platform-modules-cel/dx010/scripts/dx010_check_qsfp.sh new file mode 100644 index 000000000000..938b07952e0d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/scripts/dx010_check_qsfp.sh @@ -0,0 +1,7 @@ +#!/bin/bash + +#Usage: +# TBD + +echo "Do we need to check qsfp?" + From ec9dc577042fd8d76b27de464e560fb168540228 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Fri, 16 Feb 2018 03:53:12 +0000 Subject: [PATCH 088/180] [devices]: enable sonic-platform-modules-cel --- platform/broadcom/rules.mk | 2 +- .../sonic-platform-modules-cel/.gitignore | 3 + .../sonic-platform-modules-cel/debian/control | 2 +- .../sonic-platform-modules-cel/debian/rules | 0 .../dx010/modules/Makefile | 5 + .../dx010/modules/lm75.c | 682 +++++++++--------- .../dx010/modules/lm75.h | 2 +- 7 files changed, 354 insertions(+), 342 deletions(-) mode change 100644 => 100755 platform/broadcom/sonic-platform-modules-cel/debian/rules diff --git a/platform/broadcom/rules.mk b/platform/broadcom/rules.mk index 9b1941008654..eff7236da249 100755 --- a/platform/broadcom/rules.mk +++ b/platform/broadcom/rules.mk @@ -6,7 +6,7 @@ include $(PLATFORM_PATH)/platform-modules-dell.mk include $(PLATFORM_PATH)/platform-modules-ingrasys.mk include $(PLATFORM_PATH)/platform-modules-accton.mk include $(PLATFORM_PATH)/platform-modules-inventec.mk -#include $(PLATFORM_PATH)/platform-modules-cel.mk +include $(PLATFORM_PATH)/platform-modules-cel.mk #include $(PLATFORM_PATH)/platform-modules-delta.mk include $(PLATFORM_PATH)/platform-modules-quanta.mk #include $(PLATFORM_PATH)/platform-modules-mitac.mk diff --git a/platform/broadcom/sonic-platform-modules-cel/.gitignore b/platform/broadcom/sonic-platform-modules-cel/.gitignore index f805e810e5c6..988e49257d47 100644 --- a/platform/broadcom/sonic-platform-modules-cel/.gitignore +++ b/platform/broadcom/sonic-platform-modules-cel/.gitignore @@ -7,6 +7,9 @@ # Precompiled Headers *.gch *.pch +*.mod.c +*.ko.cmd +*.o.cmd # Libraries *.lib diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/control b/platform/broadcom/sonic-platform-modules-cel/debian/control index 72bcd54ee62c..a63df5359271 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/control +++ b/platform/broadcom/sonic-platform-modules-cel/debian/control @@ -7,6 +7,6 @@ Standards-Version: 3.9.3 Package: platform-modules-dx010 Architecture: amd64 -Depends: linux-image-3.16.0-5-amd64 +Depends: linux-image-4.9.0-5-amd64 Description: kernel modules for platform devices such as fan, led, sfp diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/rules b/platform/broadcom/sonic-platform-modules-cel/debian/rules old mode 100644 new mode 100755 diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile index c4109ec772ea..bb398cc5a745 100644 --- a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile @@ -1 +1,6 @@ obj-m := dx010_cpld.o mc24lc64t.o emc2305.o dx010_wdt.o leds-dx010.o lm75.o +KVERSION = $(shell uname -r) +all: + make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules +clean: + make -C /lib/modules/$(KVERSION)/build M=$(PWD) clean diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c index a83745212bbf..140d8f365598 100644 --- a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c @@ -37,50 +37,50 @@ */ enum lm75_type { /* keep sorted in alphabetical order */ - adt75, - ds1775, - ds75, - ds7505, - g751, - lm75, - lm75a, - lm75b, - max6625, - max6626, - mcp980x, - stds75, - tcn75, - tmp100, - tmp101, - tmp105, - tmp112, - tmp175, - tmp275, - tmp75, +adt75, +ds1775, +ds75, +ds7505, +g751, +lm75, +lm75a, +lm75b, +max6625, +max6626, +mcp980x, +stds75, +tcn75, +tmp100, +tmp101, +tmp105, +tmp112, +tmp175, +tmp275, +tmp75, }; /* Addresses scanned */ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, - 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; + 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; /* The LM75 registers */ #define LM75_REG_CONF 0x01 -static const u8 LM75_REG_TEMP[3] = { + static const u8 LM75_REG_TEMP[3] = { 0x00, /* input */ 0x03, /* max */ 0x02, /* hyst */ -}; + }; /* Each client has this additional data */ -struct lm75_data { - struct i2c_client *client; - struct device *hwmon_dev; - struct thermal_zone_device *tz; - struct mutex update_lock; - u8 orig_conf; + struct lm75_data { + struct i2c_client *client; + struct device *hwmon_dev; + struct thermal_zone_device *tz; + struct mutex update_lock; + u8 orig_conf; u8 resolution; /* In bits, between 9 and 12 */ - u8 resolution_limits; + u8 resolution_limits; char valid; /* !=0 if registers are valid */ unsigned long last_updated; /* In jiffies */ unsigned long sample_time; /* In jiffies */ @@ -88,276 +88,280 @@ struct lm75_data { 0 = input 1 = max 2 = hyst */ -}; + }; -static int lm75_read_value(struct i2c_client *client, u8 reg); -static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); -static struct lm75_data *lm75_update_device(struct device *dev); + static int lm75_read_value(struct i2c_client *client, u8 reg); + static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); + static struct lm75_data *lm75_update_device(struct device *dev); /*-----------------------------------------------------------------------*/ -static inline long lm75_reg_to_mc(s16 temp, u8 resolution) -{ - return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); -} + static inline long lm75_reg_to_mc(s16 temp, u8 resolution) + { + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); + } /* sysfs attributes for hwmon */ -static int lm75_read_temp(void *dev, long *temp) -{ - struct lm75_data *data = lm75_update_device(dev); + static int lm75_read_temp(void *dev, int *temp) + { + struct lm75_data *data = lm75_update_device(dev); - if (IS_ERR(data)) - return PTR_ERR(data); + if (IS_ERR(data)) + return PTR_ERR(data); - *temp = lm75_reg_to_mc(data->temp[0], data->resolution); + *temp = lm75_reg_to_mc(data->temp[0], data->resolution); - return 0; -} + return 0; + } -static ssize_t show_temp(struct device *dev, struct device_attribute *da, - char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct lm75_data *data = lm75_update_device(dev); + static ssize_t show_temp(struct device *dev, struct device_attribute *da, + char *buf) + { + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct lm75_data *data = lm75_update_device(dev); - if (IS_ERR(data)) - return PTR_ERR(data); + if (IS_ERR(data)) + return PTR_ERR(data); - return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], - data->resolution)); -} + return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], + data->resolution)); + } -static ssize_t set_temp(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct lm75_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int nr = attr->index; - long temp; - int error; - u8 resolution; - - error = kstrtol(buf, 10, &temp); - if (error) - return error; + static ssize_t set_temp(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) + { + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct lm75_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int nr = attr->index; + long temp; + int error; + u8 resolution; + + error = kstrtol(buf, 10, &temp); + if (error) + return error; /* * Resolution of limit registers is assumed to be the same as the * temperature input register resolution unless given explicitly. */ - if (attr->index && data->resolution_limits) - resolution = data->resolution_limits; - else - resolution = data->resolution; - - mutex_lock(&data->update_lock); - temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); - data->temp[nr] = DIV_ROUND_CLOSEST(temp << (resolution - 8), - 1000) << (16 - resolution); - lm75_write_value(client, LM75_REG_TEMP[nr], data->temp[nr]); - mutex_unlock(&data->update_lock); - return count; -} + if (attr->index && data->resolution_limits) + resolution = data->resolution_limits; + else + resolution = data->resolution; + + mutex_lock(&data->update_lock); + temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); + data->temp[nr] = DIV_ROUND_CLOSEST(temp << (resolution - 8), + 1000) << (16 - resolution); + lm75_write_value(client, LM75_REG_TEMP[nr], data->temp[nr]); + mutex_unlock(&data->update_lock); + return count; + } -static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, - show_temp, set_temp, 1); -static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, - show_temp, set_temp, 2); -static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); + static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, + show_temp, set_temp, 1); + static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, + show_temp, set_temp, 2); + static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); -static struct attribute *lm75_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + static struct attribute *lm75_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, - NULL -}; -ATTRIBUTE_GROUPS(lm75); + NULL + }; + ATTRIBUTE_GROUPS(lm75); /*-----------------------------------------------------------------------*/ + static const struct thermal_zone_of_device_ops lm75_of_thermal_ops = { + .get_temp = lm75_read_temp, + }; + /* device probe and removal */ -static int -lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) -{ - struct device *dev = &client->dev; - struct lm75_data *data; - int status; - u8 set_mask, clr_mask; - int new; - enum lm75_type kind = id->driver_data; - - if (!i2c_check_functionality(client->adapter, + static int + lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) + { + struct device *dev = &client->dev; + struct lm75_data *data; + int status; + u8 set_mask, clr_mask; + int new; + enum lm75_type kind = id->driver_data; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - return -EIO; + return -EIO; - data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL); - if (!data) - return -ENOMEM; + data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL); + if (!data) + return -ENOMEM; - data->client = client; - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); + data->client = client; + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); /* Set to LM75 resolution (9 bits, 1/2 degree C) and range. * Then tweak to be more precise when appropriate. */ - set_mask = 0; + set_mask = 0; clr_mask = LM75_SHUTDOWN; /* continuous conversions */ - switch (kind) { - case adt75: + switch (kind) { + case adt75: clr_mask |= 1 << 5; /* not one-shot mode */ - data->resolution = 12; - data->sample_time = HZ / 8; - break; - case ds1775: - case ds75: - case stds75: - clr_mask |= 3 << 5; + data->resolution = 12; + data->sample_time = HZ / 8; + break; + case ds1775: + case ds75: + case stds75: + clr_mask |= 3 << 5; set_mask |= 2 << 5; /* 11-bit mode */ - data->resolution = 11; - data->sample_time = HZ; - break; - case ds7505: + data->resolution = 11; + data->sample_time = HZ; + break; + case ds7505: set_mask |= 3 << 5; /* 12-bit mode */ - data->resolution = 12; - data->sample_time = HZ / 4; - break; - case g751: - case lm75: - case lm75a: - data->resolution = 9; - data->sample_time = HZ / 2; - break; - case lm75b: - data->resolution = 11; - data->sample_time = HZ / 4; - break; - case max6625: - data->resolution = 9; - data->sample_time = HZ / 4; - break; - case max6626: - data->resolution = 12; - data->resolution_limits = 9; - data->sample_time = HZ / 4; - break; - case tcn75: - data->resolution = 9; - data->sample_time = HZ / 8; - break; - case mcp980x: - data->resolution_limits = 9; + data->resolution = 12; + data->sample_time = HZ / 4; + break; + case g751: + case lm75: + case lm75a: + data->resolution = 9; + data->sample_time = HZ / 2; + break; + case lm75b: + data->resolution = 11; + data->sample_time = HZ / 4; + break; + case max6625: + data->resolution = 9; + data->sample_time = HZ / 4; + break; + case max6626: + data->resolution = 12; + data->resolution_limits = 9; + data->sample_time = HZ / 4; + break; + case tcn75: + data->resolution = 9; + data->sample_time = HZ / 8; + break; + case mcp980x: + data->resolution_limits = 9; /* fall through */ - case tmp100: - case tmp101: + case tmp100: + case tmp101: set_mask |= 3 << 5; /* 12-bit mode */ - data->resolution = 12; - data->sample_time = HZ; + data->resolution = 12; + data->sample_time = HZ; clr_mask |= 1 << 7; /* not one-shot mode */ - break; - case tmp112: + break; + case tmp112: set_mask |= 3 << 5; /* 12-bit mode */ clr_mask |= 1 << 7; /* not one-shot mode */ - data->resolution = 12; - data->sample_time = HZ / 4; - break; - case tmp105: - case tmp175: - case tmp275: - case tmp75: + data->resolution = 12; + data->sample_time = HZ / 4; + break; + case tmp105: + case tmp175: + case tmp275: + case tmp75: set_mask |= 3 << 5; /* 12-bit mode */ clr_mask |= 1 << 7; /* not one-shot mode */ - data->resolution = 12; - data->sample_time = HZ / 2; - break; - } + data->resolution = 12; + data->sample_time = HZ / 2; + break; + } /* configure as specified */ - status = lm75_read_value(client, LM75_REG_CONF); - if (status < 0) { - dev_dbg(dev, "Can't read config? %d\n", status); - return status; + status = lm75_read_value(client, LM75_REG_CONF); + if (status < 0) { + dev_dbg(dev, "Can't read config? %d\n", status); + return status; + } + data->orig_conf = status; + new = status & ~clr_mask; + new |= set_mask; + if (status != new) + lm75_write_value(client, LM75_REG_CONF, new); + dev_dbg(dev, "Config %02x\n", new); + + data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name, + data, lm75_groups); + if (IS_ERR(data->hwmon_dev)) + return PTR_ERR(data->hwmon_dev); + + data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, + 0, + data->hwmon_dev, + &lm75_of_thermal_ops); + if (IS_ERR(data->tz)) + data->tz = NULL; + + dev_info(dev, "%s: sensor '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; } - data->orig_conf = status; - new = status & ~clr_mask; - new |= set_mask; - if (status != new) - lm75_write_value(client, LM75_REG_CONF, new); - dev_dbg(dev, "Config %02x\n", new); - - data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name, - data, lm75_groups); - if (IS_ERR(data->hwmon_dev)) - return PTR_ERR(data->hwmon_dev); - - data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, - 0, - data->hwmon_dev, - lm75_read_temp, NULL); - if (IS_ERR(data->tz)) - data->tz = NULL; - - dev_info(dev, "%s: sensor '%s'\n", - dev_name(data->hwmon_dev), client->name); - - return 0; -} -static int lm75_remove(struct i2c_client *client) -{ - struct lm75_data *data = i2c_get_clientdata(client); + static int lm75_remove(struct i2c_client *client) + { + struct lm75_data *data = i2c_get_clientdata(client); - thermal_zone_of_sensor_unregister(data->hwmon_dev, data->tz); - hwmon_device_unregister(data->hwmon_dev); - lm75_write_value(client, LM75_REG_CONF, data->orig_conf); - return 0; -} + thermal_zone_of_sensor_unregister(data->hwmon_dev, data->tz); + hwmon_device_unregister(data->hwmon_dev); + lm75_write_value(client, LM75_REG_CONF, data->orig_conf); + return 0; + } -static const struct i2c_device_id lm75_ids[] = { - { "adt75", adt75, }, - { "ds1775", ds1775, }, - { "ds75", ds75, }, - { "ds7505", ds7505, }, - { "g751", g751, }, - { "lm75", lm75, }, - { "lm75a", lm75a, }, - { "dx010_lm75b", lm75b, }, - { "max6625", max6625, }, - { "max6626", max6626, }, - { "mcp980x", mcp980x, }, - { "stds75", stds75, }, - { "tcn75", tcn75, }, - { "tmp100", tmp100, }, - { "tmp101", tmp101, }, - { "tmp105", tmp105, }, - { "tmp112", tmp112, }, - { "tmp175", tmp175, }, - { "tmp275", tmp275, }, - { "tmp75", tmp75, }, + static const struct i2c_device_id lm75_ids[] = { + { "adt75", adt75, }, + { "ds1775", ds1775, }, + { "ds75", ds75, }, + { "ds7505", ds7505, }, + { "g751", g751, }, + { "lm75", lm75, }, + { "lm75a", lm75a, }, + { "dx010_lm75b", lm75b, }, + { "max6625", max6625, }, + { "max6626", max6626, }, + { "mcp980x", mcp980x, }, + { "stds75", stds75, }, + { "tcn75", tcn75, }, + { "tmp100", tmp100, }, + { "tmp101", tmp101, }, + { "tmp105", tmp105, }, + { "tmp112", tmp112, }, + { "tmp175", tmp175, }, + { "tmp275", tmp275, }, + { "tmp75", tmp75, }, { /* LIST END */ } -}; -MODULE_DEVICE_TABLE(i2c, lm75_ids); + }; + MODULE_DEVICE_TABLE(i2c, lm75_ids); #define LM75A_ID 0xA1 /* Return 0 if detection is successful, -ENODEV otherwise */ -static int lm75_detect(struct i2c_client *new_client, - struct i2c_board_info *info) -{ - struct i2c_adapter *adapter = new_client->adapter; - int i; - int conf, hyst, os; - bool is_lm75a = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; + static int lm75_detect(struct i2c_client *new_client, + struct i2c_board_info *info) + { + struct i2c_adapter *adapter = new_client->adapter; + int i; + int conf, hyst, os; + bool is_lm75a = 0; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; /* * Now, we do the remaining detection. There is no identification- @@ -385,105 +389,105 @@ static int lm75_detect(struct i2c_client *new_client, */ /* Unused bits */ - conf = i2c_smbus_read_byte_data(new_client, 1); - if (conf & 0xe0) - return -ENODEV; + conf = i2c_smbus_read_byte_data(new_client, 1); + if (conf & 0xe0) + return -ENODEV; /* First check for LM75A */ - if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) { + if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) { /* LM75A returns 0xff on unused registers so just to be sure we check for that too. */ - if (i2c_smbus_read_byte_data(new_client, 4) != 0xff - || i2c_smbus_read_byte_data(new_client, 5) != 0xff - || i2c_smbus_read_byte_data(new_client, 6) != 0xff) - return -ENODEV; - is_lm75a = 1; - hyst = i2c_smbus_read_byte_data(new_client, 2); - os = i2c_smbus_read_byte_data(new_client, 3); + if (i2c_smbus_read_byte_data(new_client, 4) != 0xff + || i2c_smbus_read_byte_data(new_client, 5) != 0xff + || i2c_smbus_read_byte_data(new_client, 6) != 0xff) + return -ENODEV; + is_lm75a = 1; + hyst = i2c_smbus_read_byte_data(new_client, 2); + os = i2c_smbus_read_byte_data(new_client, 3); } else { /* Traditional style LM75 detection */ /* Unused addresses */ - hyst = i2c_smbus_read_byte_data(new_client, 2); - if (i2c_smbus_read_byte_data(new_client, 4) != hyst - || i2c_smbus_read_byte_data(new_client, 5) != hyst - || i2c_smbus_read_byte_data(new_client, 6) != hyst - || i2c_smbus_read_byte_data(new_client, 7) != hyst) - return -ENODEV; - os = i2c_smbus_read_byte_data(new_client, 3); - if (i2c_smbus_read_byte_data(new_client, 4) != os - || i2c_smbus_read_byte_data(new_client, 5) != os - || i2c_smbus_read_byte_data(new_client, 6) != os - || i2c_smbus_read_byte_data(new_client, 7) != os) - return -ENODEV; - } + hyst = i2c_smbus_read_byte_data(new_client, 2); + if (i2c_smbus_read_byte_data(new_client, 4) != hyst + || i2c_smbus_read_byte_data(new_client, 5) != hyst + || i2c_smbus_read_byte_data(new_client, 6) != hyst + || i2c_smbus_read_byte_data(new_client, 7) != hyst) + return -ENODEV; + os = i2c_smbus_read_byte_data(new_client, 3); + if (i2c_smbus_read_byte_data(new_client, 4) != os + || i2c_smbus_read_byte_data(new_client, 5) != os + || i2c_smbus_read_byte_data(new_client, 6) != os + || i2c_smbus_read_byte_data(new_client, 7) != os) + return -ENODEV; + } /* Addresses cycling */ - for (i = 8; i <= 248; i += 40) { - if (i2c_smbus_read_byte_data(new_client, i + 1) != conf - || i2c_smbus_read_byte_data(new_client, i + 2) != hyst - || i2c_smbus_read_byte_data(new_client, i + 3) != os) - return -ENODEV; - if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7) + for (i = 8; i <= 248; i += 40) { + if (i2c_smbus_read_byte_data(new_client, i + 1) != conf + || i2c_smbus_read_byte_data(new_client, i + 2) != hyst + || i2c_smbus_read_byte_data(new_client, i + 3) != os) + return -ENODEV; + if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7) != LM75A_ID) - return -ENODEV; - } + return -ENODEV; + } - strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE); + strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE); - return 0; -} + return 0; + } #ifdef CONFIG_PM -static int lm75_suspend(struct device *dev) -{ - int status; - struct i2c_client *client = to_i2c_client(dev); - status = lm75_read_value(client, LM75_REG_CONF); - if (status < 0) { - dev_dbg(&client->dev, "Can't read config? %d\n", status); - return status; + static int lm75_suspend(struct device *dev) + { + int status; + struct i2c_client *client = to_i2c_client(dev); + status = lm75_read_value(client, LM75_REG_CONF); + if (status < 0) { + dev_dbg(&client->dev, "Can't read config? %d\n", status); + return status; + } + status = status | LM75_SHUTDOWN; + lm75_write_value(client, LM75_REG_CONF, status); + return 0; } - status = status | LM75_SHUTDOWN; - lm75_write_value(client, LM75_REG_CONF, status); - return 0; -} -static int lm75_resume(struct device *dev) -{ - int status; - struct i2c_client *client = to_i2c_client(dev); - status = lm75_read_value(client, LM75_REG_CONF); - if (status < 0) { - dev_dbg(&client->dev, "Can't read config? %d\n", status); - return status; + static int lm75_resume(struct device *dev) + { + int status; + struct i2c_client *client = to_i2c_client(dev); + status = lm75_read_value(client, LM75_REG_CONF); + if (status < 0) { + dev_dbg(&client->dev, "Can't read config? %d\n", status); + return status; + } + status = status & ~LM75_SHUTDOWN; + lm75_write_value(client, LM75_REG_CONF, status); + return 0; } - status = status & ~LM75_SHUTDOWN; - lm75_write_value(client, LM75_REG_CONF, status); - return 0; -} -static const struct dev_pm_ops lm75_dev_pm_ops = { - .suspend = lm75_suspend, - .resume = lm75_resume, -}; + static const struct dev_pm_ops lm75_dev_pm_ops = { + .suspend = lm75_suspend, + .resume = lm75_resume, + }; #define LM75_DEV_PM_OPS (&lm75_dev_pm_ops) #else #define LM75_DEV_PM_OPS NULL #endif /* CONFIG_PM */ -static struct i2c_driver lm75_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "dx010_lm75", - .pm = LM75_DEV_PM_OPS, - }, - .probe = lm75_probe, - .remove = lm75_remove, - .id_table = lm75_ids, + static struct i2c_driver lm75_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "dx010_lm75", + .pm = LM75_DEV_PM_OPS, + }, + .probe = lm75_probe, + .remove = lm75_remove, + .id_table = lm75_ids, /* .detect = lm75_detect, .address_list = normal_i2c, */ -}; + }; /*-----------------------------------------------------------------------*/ @@ -494,33 +498,33 @@ static struct i2c_driver lm75_driver = { * LM75 uses a high-byte first convention, which is exactly opposite to * the SMBus standard. */ -static int lm75_read_value(struct i2c_client *client, u8 reg) -{ - if (reg == LM75_REG_CONF) - return i2c_smbus_read_byte_data(client, reg); - else - return i2c_smbus_read_word_swapped(client, reg); -} + static int lm75_read_value(struct i2c_client *client, u8 reg) + { + if (reg == LM75_REG_CONF) + return i2c_smbus_read_byte_data(client, reg); + else + return i2c_smbus_read_word_swapped(client, reg); + } -static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if (reg == LM75_REG_CONF) - return i2c_smbus_write_byte_data(client, reg, value); - else - return i2c_smbus_write_word_swapped(client, reg, value); -} + static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) + { + if (reg == LM75_REG_CONF) + return i2c_smbus_write_byte_data(client, reg, value); + else + return i2c_smbus_write_word_swapped(client, reg, value); + } -static struct lm75_data *lm75_update_device(struct device *dev) -{ - struct lm75_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - struct lm75_data *ret = data; + static struct lm75_data *lm75_update_device(struct device *dev) + { + struct lm75_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + struct lm75_data *ret = data; - mutex_lock(&data->update_lock); + mutex_lock(&data->update_lock); - if (time_after(jiffies, data->last_updated + data->sample_time) - || !data->valid) { - int i; + if (time_after(jiffies, data->last_updated + data->sample_time) + || !data->valid) { + int i; dev_dbg(&client->dev, "Starting lm75 update\n"); for (i = 0; i < ARRAY_SIZE(data->temp); i++) { @@ -541,7 +545,7 @@ static struct lm75_data *lm75_update_device(struct device *dev) data->valid = 1; } -abort: + abort: mutex_unlock(&data->update_lock); return ret; } diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h index 5cde94e56f17..c9097f9db7ab 100644 --- a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h @@ -46,4 +46,4 @@ static inline int LM75_TEMP_FROM_REG(u16 reg) /* use integer division instead of equivalent right shift to guarantee arithmetic shift and preserve the sign */ return ((s16)reg / 128) * 500; -} +} \ No newline at end of file From 025dad0e11377d642976e213a27a79826e1bf5d4 Mon Sep 17 00:00:00 2001 From: pwisutti <33824525+pwisutti@users.noreply.github.com> Date: Thu, 1 Mar 2018 01:20:01 +0700 Subject: [PATCH 089/180] [celestica] change to use lm75 standard driver (#19) --- .../x86_64-cel_seastone-r0/sensors.conf | 27 +- .../debian/platform-modules-dx010.init | 11 +- .../dx010/modules/Makefile | 7 +- .../dx010/modules/lm75.c | 557 ------------------ .../dx010/modules/lm75.h | 49 -- 5 files changed, 19 insertions(+), 632 deletions(-) delete mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c delete mode 100644 platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h diff --git a/device/celestica/x86_64-cel_seastone-r0/sensors.conf b/device/celestica/x86_64-cel_seastone-r0/sensors.conf index 6ce4540b226e..307587f687e5 100644 --- a/device/celestica/x86_64-cel_seastone-r0/sensors.conf +++ b/device/celestica/x86_64-cel_seastone-r0/sensors.conf @@ -36,33 +36,30 @@ chip "dps460-i2c-*-5b" set in3_crit 13.0 set in3_lcrit 11.0 -# These sensors located on CPU Board. -chip "dx010_lm75b-i2c-*-48" - label temp1 "CPU_external temp sensor" +# These sensors located on Main Switch Board. +chip "lm75b-i2c-*-48" + label temp1 "Front-panel temp sensor 1" set temp1_max 43 set temp1_max_hyst 28 -chip "dx010_lm75b-i2c-*-4e" - label temp1 "Rear_panel temp sensor" +chip "lm75b-i2c-*-49" + label temp1 "Front-panel temp sensor 2" set temp1_max 43 set temp1_max_hyst 28 -# These sensors located on Main Switch Board. -bus "i2c-5" "i2c-1-mux (chan_id 3)" -chip "dx010_lm75b-i2c-5-48" - label temp1 "Front_panel left temp sensor" +chip "lm75b-i2c-*-4a" + label temp1 "ASIC temp sensor" set temp1_max 43 set temp1_max_hyst 28 -bus "i2c-6" "i2c-1-mux (chan_id 4)" -chip "dx010_lm75b-i2c-6-49" - label temp1 "Front_panel right temp sensor" +# These sensors located on CPU Board. +chip "lm75b-i2c-*-48" + label temp1 "Rear-panel temp sensor 1" set temp1_max 43 set temp1_max_hyst 28 -bus "i2c-7" "i2c-1-mux (chan_id 5)" -chip "dx010_lm75b-i2c-7-4a" - label temp1 "Switch_external temp sensor" +chip "lm75b-i2c-*-4e" + label temp1 "Rear-panel temp sensor 2" set temp1_max 43 set temp1_max_hyst 28 diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init index 0c883cd388ae..c51aa742076b 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init @@ -20,6 +20,7 @@ start) modprobe i2c-mux-pca954x modprobe dx010_wdt modprobe leds-dx010 + modprobe lm75 found=0 for devnum in 0 1; do @@ -56,11 +57,11 @@ start) echo 24lc64t 0x50 > /sys/bus/i2c/devices/i2c-12/new_device # Attach temperature sensors - echo dx010_lm75b 0x48 > /sys/bus/i2c/devices/i2c-5/new_device - echo dx010_lm75b 0x49 > /sys/bus/i2c/devices/i2c-6/new_device - echo dx010_lm75b 0x4a > /sys/bus/i2c/devices/i2c-7/new_device - echo dx010_lm75b 0x48 > /sys/bus/i2c/devices/i2c-14/new_device - echo dx010_lm75b 0x4e > /sys/bus/i2c/devices/i2c-15/new_device + echo lm75b 0x48 > /sys/bus/i2c/devices/i2c-5/new_device + echo lm75b 0x49 > /sys/bus/i2c/devices/i2c-6/new_device + echo lm75b 0x4a > /sys/bus/i2c/devices/i2c-7/new_device + echo lm75b 0x48 > /sys/bus/i2c/devices/i2c-14/new_device + echo lm75b 0x4e > /sys/bus/i2c/devices/i2c-15/new_device # Attach fans echo emc2305 0x2e > /sys/bus/i2c/devices/i2c-13/new_device diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile index bb398cc5a745..9b0f10604811 100644 --- a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/Makefile @@ -1,6 +1 @@ -obj-m := dx010_cpld.o mc24lc64t.o emc2305.o dx010_wdt.o leds-dx010.o lm75.o -KVERSION = $(shell uname -r) -all: - make -C /lib/modules/$(KVERSION)/build M=$(PWD) modules -clean: - make -C /lib/modules/$(KVERSION)/build M=$(PWD) clean +obj-m := dx010_cpld.o mc24lc64t.o emc2305.o dx010_wdt.o leds-dx010.o \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c deleted file mode 100644 index 140d8f365598..000000000000 --- a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.c +++ /dev/null @@ -1,557 +0,0 @@ -/* - * lm75.c - Part of lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (c) 1998, 1999 Frodo Looijaard - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "lm75.h" - - -/* - * This driver handles the LM75 and compatible digital temperature sensors. - */ - -enum lm75_type { /* keep sorted in alphabetical order */ -adt75, -ds1775, -ds75, -ds7505, -g751, -lm75, -lm75a, -lm75b, -max6625, -max6626, -mcp980x, -stds75, -tcn75, -tmp100, -tmp101, -tmp105, -tmp112, -tmp175, -tmp275, -tmp75, -}; - -/* Addresses scanned */ -static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 0x4c, - 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; - - -/* The LM75 registers */ -#define LM75_REG_CONF 0x01 - static const u8 LM75_REG_TEMP[3] = { - 0x00, /* input */ - 0x03, /* max */ - 0x02, /* hyst */ - }; - -/* Each client has this additional data */ - struct lm75_data { - struct i2c_client *client; - struct device *hwmon_dev; - struct thermal_zone_device *tz; - struct mutex update_lock; - u8 orig_conf; - u8 resolution; /* In bits, between 9 and 12 */ - u8 resolution_limits; - char valid; /* !=0 if registers are valid */ - unsigned long last_updated; /* In jiffies */ - unsigned long sample_time; /* In jiffies */ - s16 temp[3]; /* Register values, - 0 = input - 1 = max - 2 = hyst */ - }; - - static int lm75_read_value(struct i2c_client *client, u8 reg); - static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value); - static struct lm75_data *lm75_update_device(struct device *dev); - - -/*-----------------------------------------------------------------------*/ - - static inline long lm75_reg_to_mc(s16 temp, u8 resolution) - { - return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); - } - -/* sysfs attributes for hwmon */ - - static int lm75_read_temp(void *dev, int *temp) - { - struct lm75_data *data = lm75_update_device(dev); - - if (IS_ERR(data)) - return PTR_ERR(data); - - *temp = lm75_reg_to_mc(data->temp[0], data->resolution); - - return 0; - } - - static ssize_t show_temp(struct device *dev, struct device_attribute *da, - char *buf) - { - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct lm75_data *data = lm75_update_device(dev); - - if (IS_ERR(data)) - return PTR_ERR(data); - - return sprintf(buf, "%ld\n", lm75_reg_to_mc(data->temp[attr->index], - data->resolution)); - } - - static ssize_t set_temp(struct device *dev, struct device_attribute *da, - const char *buf, size_t count) - { - struct sensor_device_attribute *attr = to_sensor_dev_attr(da); - struct lm75_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - int nr = attr->index; - long temp; - int error; - u8 resolution; - - error = kstrtol(buf, 10, &temp); - if (error) - return error; - - /* - * Resolution of limit registers is assumed to be the same as the - * temperature input register resolution unless given explicitly. - */ - if (attr->index && data->resolution_limits) - resolution = data->resolution_limits; - else - resolution = data->resolution; - - mutex_lock(&data->update_lock); - temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); - data->temp[nr] = DIV_ROUND_CLOSEST(temp << (resolution - 8), - 1000) << (16 - resolution); - lm75_write_value(client, LM75_REG_TEMP[nr], data->temp[nr]); - mutex_unlock(&data->update_lock); - return count; - } - - static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, - show_temp, set_temp, 1); - static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, - show_temp, set_temp, 2); - static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); - - static struct attribute *lm75_attrs[] = { - &sensor_dev_attr_temp1_input.dev_attr.attr, - &sensor_dev_attr_temp1_max.dev_attr.attr, - &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, - - NULL - }; - ATTRIBUTE_GROUPS(lm75); - -/*-----------------------------------------------------------------------*/ - - static const struct thermal_zone_of_device_ops lm75_of_thermal_ops = { - .get_temp = lm75_read_temp, - }; - -/* device probe and removal */ - - static int - lm75_probe(struct i2c_client *client, const struct i2c_device_id *id) - { - struct device *dev = &client->dev; - struct lm75_data *data; - int status; - u8 set_mask, clr_mask; - int new; - enum lm75_type kind = id->driver_data; - - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) - return -EIO; - - data = devm_kzalloc(dev, sizeof(struct lm75_data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->client = client; - i2c_set_clientdata(client, data); - mutex_init(&data->update_lock); - - /* Set to LM75 resolution (9 bits, 1/2 degree C) and range. - * Then tweak to be more precise when appropriate. - */ - set_mask = 0; - clr_mask = LM75_SHUTDOWN; /* continuous conversions */ - - switch (kind) { - case adt75: - clr_mask |= 1 << 5; /* not one-shot mode */ - data->resolution = 12; - data->sample_time = HZ / 8; - break; - case ds1775: - case ds75: - case stds75: - clr_mask |= 3 << 5; - set_mask |= 2 << 5; /* 11-bit mode */ - data->resolution = 11; - data->sample_time = HZ; - break; - case ds7505: - set_mask |= 3 << 5; /* 12-bit mode */ - data->resolution = 12; - data->sample_time = HZ / 4; - break; - case g751: - case lm75: - case lm75a: - data->resolution = 9; - data->sample_time = HZ / 2; - break; - case lm75b: - data->resolution = 11; - data->sample_time = HZ / 4; - break; - case max6625: - data->resolution = 9; - data->sample_time = HZ / 4; - break; - case max6626: - data->resolution = 12; - data->resolution_limits = 9; - data->sample_time = HZ / 4; - break; - case tcn75: - data->resolution = 9; - data->sample_time = HZ / 8; - break; - case mcp980x: - data->resolution_limits = 9; - /* fall through */ - case tmp100: - case tmp101: - set_mask |= 3 << 5; /* 12-bit mode */ - data->resolution = 12; - data->sample_time = HZ; - clr_mask |= 1 << 7; /* not one-shot mode */ - break; - case tmp112: - set_mask |= 3 << 5; /* 12-bit mode */ - clr_mask |= 1 << 7; /* not one-shot mode */ - data->resolution = 12; - data->sample_time = HZ / 4; - break; - case tmp105: - case tmp175: - case tmp275: - case tmp75: - set_mask |= 3 << 5; /* 12-bit mode */ - clr_mask |= 1 << 7; /* not one-shot mode */ - data->resolution = 12; - data->sample_time = HZ / 2; - break; - } - - /* configure as specified */ - status = lm75_read_value(client, LM75_REG_CONF); - if (status < 0) { - dev_dbg(dev, "Can't read config? %d\n", status); - return status; - } - data->orig_conf = status; - new = status & ~clr_mask; - new |= set_mask; - if (status != new) - lm75_write_value(client, LM75_REG_CONF, new); - dev_dbg(dev, "Config %02x\n", new); - - data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name, - data, lm75_groups); - if (IS_ERR(data->hwmon_dev)) - return PTR_ERR(data->hwmon_dev); - - data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, - 0, - data->hwmon_dev, - &lm75_of_thermal_ops); - if (IS_ERR(data->tz)) - data->tz = NULL; - - dev_info(dev, "%s: sensor '%s'\n", - dev_name(data->hwmon_dev), client->name); - - return 0; - } - - static int lm75_remove(struct i2c_client *client) - { - struct lm75_data *data = i2c_get_clientdata(client); - - thermal_zone_of_sensor_unregister(data->hwmon_dev, data->tz); - hwmon_device_unregister(data->hwmon_dev); - lm75_write_value(client, LM75_REG_CONF, data->orig_conf); - return 0; - } - - static const struct i2c_device_id lm75_ids[] = { - { "adt75", adt75, }, - { "ds1775", ds1775, }, - { "ds75", ds75, }, - { "ds7505", ds7505, }, - { "g751", g751, }, - { "lm75", lm75, }, - { "lm75a", lm75a, }, - { "dx010_lm75b", lm75b, }, - { "max6625", max6625, }, - { "max6626", max6626, }, - { "mcp980x", mcp980x, }, - { "stds75", stds75, }, - { "tcn75", tcn75, }, - { "tmp100", tmp100, }, - { "tmp101", tmp101, }, - { "tmp105", tmp105, }, - { "tmp112", tmp112, }, - { "tmp175", tmp175, }, - { "tmp275", tmp275, }, - { "tmp75", tmp75, }, - { /* LIST END */ } - }; - MODULE_DEVICE_TABLE(i2c, lm75_ids); - -#define LM75A_ID 0xA1 - -/* Return 0 if detection is successful, -ENODEV otherwise */ - static int lm75_detect(struct i2c_client *new_client, - struct i2c_board_info *info) - { - struct i2c_adapter *adapter = new_client->adapter; - int i; - int conf, hyst, os; - bool is_lm75a = 0; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | - I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; - - /* - * Now, we do the remaining detection. There is no identification- - * dedicated register so we have to rely on several tricks: - * unused bits, registers cycling over 8-address boundaries, - * addresses 0x04-0x07 returning the last read value. - * The cycling+unused addresses combination is not tested, - * since it would significantly slow the detection down and would - * hardly add any value. - * - * The National Semiconductor LM75A is different than earlier - * LM75s. It has an ID byte of 0xaX (where X is the chip - * revision, with 1 being the only revision in existence) in - * register 7, and unused registers return 0xff rather than the - * last read value. - * - * Note that this function only detects the original National - * Semiconductor LM75 and the LM75A. Clones from other vendors - * aren't detected, on purpose, because they are typically never - * found on PC hardware. They are found on embedded designs where - * they can be instantiated explicitly so detection is not needed. - * The absence of identification registers on all these clones - * would make their exhaustive detection very difficult and weak, - * and odds are that the driver would bind to unsupported devices. - */ - - /* Unused bits */ - conf = i2c_smbus_read_byte_data(new_client, 1); - if (conf & 0xe0) - return -ENODEV; - - /* First check for LM75A */ - if (i2c_smbus_read_byte_data(new_client, 7) == LM75A_ID) { - /* LM75A returns 0xff on unused registers so - just to be sure we check for that too. */ - if (i2c_smbus_read_byte_data(new_client, 4) != 0xff - || i2c_smbus_read_byte_data(new_client, 5) != 0xff - || i2c_smbus_read_byte_data(new_client, 6) != 0xff) - return -ENODEV; - is_lm75a = 1; - hyst = i2c_smbus_read_byte_data(new_client, 2); - os = i2c_smbus_read_byte_data(new_client, 3); - } else { /* Traditional style LM75 detection */ - /* Unused addresses */ - hyst = i2c_smbus_read_byte_data(new_client, 2); - if (i2c_smbus_read_byte_data(new_client, 4) != hyst - || i2c_smbus_read_byte_data(new_client, 5) != hyst - || i2c_smbus_read_byte_data(new_client, 6) != hyst - || i2c_smbus_read_byte_data(new_client, 7) != hyst) - return -ENODEV; - os = i2c_smbus_read_byte_data(new_client, 3); - if (i2c_smbus_read_byte_data(new_client, 4) != os - || i2c_smbus_read_byte_data(new_client, 5) != os - || i2c_smbus_read_byte_data(new_client, 6) != os - || i2c_smbus_read_byte_data(new_client, 7) != os) - return -ENODEV; - } - - /* Addresses cycling */ - for (i = 8; i <= 248; i += 40) { - if (i2c_smbus_read_byte_data(new_client, i + 1) != conf - || i2c_smbus_read_byte_data(new_client, i + 2) != hyst - || i2c_smbus_read_byte_data(new_client, i + 3) != os) - return -ENODEV; - if (is_lm75a && i2c_smbus_read_byte_data(new_client, i + 7) - != LM75A_ID) - return -ENODEV; - } - - strlcpy(info->type, is_lm75a ? "lm75a" : "lm75", I2C_NAME_SIZE); - - return 0; - } - -#ifdef CONFIG_PM - static int lm75_suspend(struct device *dev) - { - int status; - struct i2c_client *client = to_i2c_client(dev); - status = lm75_read_value(client, LM75_REG_CONF); - if (status < 0) { - dev_dbg(&client->dev, "Can't read config? %d\n", status); - return status; - } - status = status | LM75_SHUTDOWN; - lm75_write_value(client, LM75_REG_CONF, status); - return 0; - } - - static int lm75_resume(struct device *dev) - { - int status; - struct i2c_client *client = to_i2c_client(dev); - status = lm75_read_value(client, LM75_REG_CONF); - if (status < 0) { - dev_dbg(&client->dev, "Can't read config? %d\n", status); - return status; - } - status = status & ~LM75_SHUTDOWN; - lm75_write_value(client, LM75_REG_CONF, status); - return 0; - } - - static const struct dev_pm_ops lm75_dev_pm_ops = { - .suspend = lm75_suspend, - .resume = lm75_resume, - }; -#define LM75_DEV_PM_OPS (&lm75_dev_pm_ops) -#else -#define LM75_DEV_PM_OPS NULL -#endif /* CONFIG_PM */ - - static struct i2c_driver lm75_driver = { - .class = I2C_CLASS_HWMON, - .driver = { - .name = "dx010_lm75", - .pm = LM75_DEV_PM_OPS, - }, - .probe = lm75_probe, - .remove = lm75_remove, - .id_table = lm75_ids, -/* - .detect = lm75_detect, - .address_list = normal_i2c, -*/ - }; - -/*-----------------------------------------------------------------------*/ - -/* register access */ - -/* - * All registers are word-sized, except for the configuration register. - * LM75 uses a high-byte first convention, which is exactly opposite to - * the SMBus standard. - */ - static int lm75_read_value(struct i2c_client *client, u8 reg) - { - if (reg == LM75_REG_CONF) - return i2c_smbus_read_byte_data(client, reg); - else - return i2c_smbus_read_word_swapped(client, reg); - } - - static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) - { - if (reg == LM75_REG_CONF) - return i2c_smbus_write_byte_data(client, reg, value); - else - return i2c_smbus_write_word_swapped(client, reg, value); - } - - static struct lm75_data *lm75_update_device(struct device *dev) - { - struct lm75_data *data = dev_get_drvdata(dev); - struct i2c_client *client = data->client; - struct lm75_data *ret = data; - - mutex_lock(&data->update_lock); - - if (time_after(jiffies, data->last_updated + data->sample_time) - || !data->valid) { - int i; - dev_dbg(&client->dev, "Starting lm75 update\n"); - - for (i = 0; i < ARRAY_SIZE(data->temp); i++) { - int status; - - status = lm75_read_value(client, LM75_REG_TEMP[i]); - if (unlikely(status < 0)) { - dev_dbg(dev, - "LM75: Failed to read value: reg %d, error %d\n", - LM75_REG_TEMP[i], status); - ret = ERR_PTR(status); - data->valid = 0; - goto abort; - } - data->temp[i] = status; - } - data->last_updated = jiffies; - data->valid = 1; - } - - abort: - mutex_unlock(&data->update_lock); - return ret; -} - -module_i2c_driver(lm75_driver); - -MODULE_AUTHOR("Frodo Looijaard "); -MODULE_DESCRIPTION("LM75 driver"); -MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h deleted file mode 100644 index c9097f9db7ab..000000000000 --- a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/lm75.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - lm75.h - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 2003 Mark M. Hoffman - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -/* - This file contains common code for encoding/decoding LM75 type - temperature readings, which are emulated by many of the chips - we support. As the user is unlikely to load more than one driver - which contains this code, we don't worry about the wasted space. -*/ - -#include - -/* straight from the datasheet */ -#define LM75_TEMP_MIN (-55000) -#define LM75_TEMP_MAX 125000 -#define LM75_SHUTDOWN 0x01 - -/* TEMP: 0.001C/bit (-55C to +125C) - REG: (0.5C/bit, two's complement) << 7 */ -static inline u16 LM75_TEMP_TO_REG(long temp) -{ - int ntemp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX); - ntemp += (ntemp < 0 ? -250 : 250); - return (u16)((ntemp / 500) << 7); -} - -static inline int LM75_TEMP_FROM_REG(u16 reg) -{ - /* use integer division instead of equivalent right shift to - guarantee arithmetic shift and preserve the sign */ - return ((s16)reg / 128) * 500; -} \ No newline at end of file From 4142d7f4bfabf611ebc88c3791d8ae1dbd2fb130 Mon Sep 17 00:00:00 2001 From: nealtai <33504193+nealtai@users.noreply.github.com> Date: Thu, 1 Mar 2018 16:55:28 +0800 Subject: [PATCH 090/180] [Delta]: Modify delta-ag9032v1 driver for kernel 4.9 (#20) Signed-off-by: neal tai --- platform/broadcom/rules.mk | 2 +- .../ag9032v1/modules/Makefile | 1 - .../modules/delta_ag9032v1_platform.c | 219 ++++++++++++++++-- .../ag9032v1/modules/dni_ag9032v1_psu.c | 7 +- .../debian/control | 2 +- .../debian/platform-modules-ag9032v1.install | 1 + .../sonic-platform-modules-delta/debian/rules | 2 +- .../systemd/platform-modules-ag9032v1.service | 13 ++ 8 files changed, 217 insertions(+), 30 deletions(-) create mode 100644 platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag9032v1.service diff --git a/platform/broadcom/rules.mk b/platform/broadcom/rules.mk index eff7236da249..a065506a4287 100755 --- a/platform/broadcom/rules.mk +++ b/platform/broadcom/rules.mk @@ -7,7 +7,7 @@ include $(PLATFORM_PATH)/platform-modules-ingrasys.mk include $(PLATFORM_PATH)/platform-modules-accton.mk include $(PLATFORM_PATH)/platform-modules-inventec.mk include $(PLATFORM_PATH)/platform-modules-cel.mk -#include $(PLATFORM_PATH)/platform-modules-delta.mk +include $(PLATFORM_PATH)/platform-modules-delta.mk include $(PLATFORM_PATH)/platform-modules-quanta.mk #include $(PLATFORM_PATH)/platform-modules-mitac.mk include $(PLATFORM_PATH)/docker-orchagent-brcm.mk diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/Makefile b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/Makefile index fc335c2a977f..d77d3b78408f 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/Makefile +++ b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/Makefile @@ -1,2 +1 @@ obj-m := dni_ag9032v1_psu.o dni_emc2305.o delta_ag9032v1_platform.o delta_ag9032v1_cpupld.o - diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c index abf5b7e3a024..982110236272 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c @@ -248,25 +248,25 @@ static struct i2c_device_platform_data ag9032v1_i2c_device_platform_data[] = { { /* psu 1 (0x58) */ .parent = 40, - .info = { .type = "dni_ag9032v1_psu", .addr = 0x58, .platform_data = 0 }, + .info = { .type = "dni_ag9032v1_psu", .addr = 0x58, .platform_data = (void *) 0 }, .client = NULL, }, { /* psu 2 (0x58) */ .parent = 41, - .info = { .type = "dni_ag9032v1_psu", .addr = 0x58, .platform_data = 1 }, + .info = { .type = "dni_ag9032v1_psu", .addr = 0x58, .platform_data = (void *) 1 }, .client = NULL, }, { /* hot-swap 1 (0x40) */ .parent = 42, - .info = { .type = "ltc4215", .addr = 0x40, .platform_data = 0 }, + .info = { .type = "ltc4215", .addr = 0x40, .platform_data = (void *) 0 }, .client = NULL, }, { /* hot-swap 2 (0x40) */ .parent = 43, - .info = { .type = "ltc4215", .addr = 0x40, .platform_data = 1 }, + .info = { .type = "ltc4215", .addr = 0x40, .platform_data = (void *) 1 }, .client = NULL, }, { @@ -1043,22 +1043,22 @@ static ssize_t get_present(struct device *dev, struct device_attribute \ ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_PRESENCE_1); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data = (u32)reverse_8bits(ret) & 0xff; ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_PRESENCE_2); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 8; ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_PRESENCE_3); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 16; ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_PRESENCE_4); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 24; return sprintf(buf, "0x%08x\n", data); //return 32bits data @@ -1072,22 +1072,22 @@ static ssize_t get_lpmode(struct device *dev, struct device_attribute *devattr, ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_LP_MODE_1); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data = (u32)(reverse_8bits(ret) & 0xff); ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_LP_MODE_2); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 8; ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_LP_MODE_3); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 16; ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_LP_MODE_4); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 24; return sprintf(buf, "0x%08x\n", data); //return 32bits data @@ -1119,22 +1119,22 @@ static ssize_t get_reset(struct device *dev, struct device_attribute *devattr, c ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_RESET_1); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data = (u32)(reverse_8bits(ret) & 0xff); ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_RESET_2); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 8; ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_RESET_3); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 16; ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_RESET_4); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 24; return sprintf(buf, "0x%08x\n", data); //return 32bits data @@ -1166,22 +1166,22 @@ static ssize_t get_response(struct device *dev, struct device_attribute *devattr ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_RESPONSE_1); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data = (u32)(reverse_8bits(ret) & 0xff); ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_RESPONSE_2); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 8; ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_RESPONSE_3); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 16; ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, SFP_RESPONSE_4); if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); + return sprintf(buf, "error number(%d)",ret); data |= (u32)(reverse_8bits(ret) & 0xff) << 24; return sprintf(buf, "0x%08x\n", data); //return 32bits data @@ -2048,6 +2048,7 @@ static int cpld_reg_write_byte(struct i2c_client *client, u8 regaddr, u8 val) regaddr, I2C_SMBUS_BYTE_DATA, &data); } +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) static int swpld_mux_select(struct i2c_adapter *adap, void *data, u8 chan) { struct swpld_mux *mux = data; @@ -2123,7 +2124,86 @@ static int swpld_mux_select(struct i2c_adapter *adap, void *data, u8 chan) } return cpld_reg_write_byte(mux->data.cpld, mux->data.reg_addr, (u8)(swpld_mux_val & 0xff)); } +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int swpld_mux_select(struct i2c_mux_core *muxc, u32 chan) +{ + struct swpld_mux *mux = i2c_mux_priv(muxc); + u8 swpld_mux_val=0; + + if ( mux->data.base_nr == BUS3_BASE_NUM ) + { + switch (chan) { + case 0: + swpld_mux_val = TEMP_FAN_VAL; + break; + case 1: + swpld_mux_val = FAN_EEPROM1_VAL; + break; + case 2: + swpld_mux_val = FAN_EEPROM2_VAL; + break; + case 3: + swpld_mux_val = FAN_EEPROM3_VAL; + break; + case 4: + swpld_mux_val = FAN_EEPROM4_VAL; + break; + case 5: + swpld_mux_val = FAN_EEPROM5_VAL; + break; + case 6: + swpld_mux_val = FANIO_CTL_VAL; + break; + case 7: + case 8: + swpld_mux_val = FAN_CTRL_VAL; + break; + } + } + else if ( mux->data.base_nr == BUS4_BASE_NUM ) + { + switch (chan) { + case 0: + swpld_mux_val = PSU1_VAL; + break; + case 1: + swpld_mux_val = PSU2_VAL; + break; + case 2: + swpld_mux_val = HOT_SWAP1_VAL; + break; + case 3: + swpld_mux_val = HOT_SWAP2_VAL; + break; + } + } + else if ( mux->data.base_nr == BUS5_BASE_NUM ){ + if (chan < 9){ + swpld_mux_val = (u8)(chan) + 0x01; + } + else if (8 < chan && chan < 19){ + swpld_mux_val = (u8)(chan - 9) + 0x10; + } + else if (18 < chan && chan < 29){ + swpld_mux_val = (u8)(chan - 19) + 0x20; + } + else if (28 < chan && chan < 39){ + swpld_mux_val = (u8)(chan - 29) + 0x30; + } + else{ + swpld_mux_val = 0x00; + } + } + else + { + swpld_mux_val = 0x00; + } + + return cpld_reg_write_byte(mux->data.cpld, mux->data.reg_addr, (u8)(swpld_mux_val & 0xff)); +} +#endif // #if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) static int __init swpld_mux_probe(struct platform_device *pdev) { struct swpld_mux *mux; @@ -2202,8 +2282,89 @@ static int __init swpld_mux_probe(struct platform_device *pdev) return ret; } +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int __init swpld_mux_probe(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc; + struct swpld_mux *mux; + struct swpld_mux_platform_data *pdata; + struct i2c_adapter *parent; + int i, ret, dev_num; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "SWPLD platform data not found\n"); + return -ENODEV; + } + + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) { + printk(KERN_ERR "Failed to allocate memory for mux\n"); + return -ENOMEM; + } + mux->data = *pdata; + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + kfree(mux); + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", pdata->parent); + return -ENODEV; + } + + /* Judge bus number to decide how many devices*/ + switch (pdata->parent) { + case BUS3: + dev_num = BUS3_DEV_NUM; + break; + case BUS4: + dev_num = BUS4_DEV_NUM; + break; + case BUS5: + dev_num = BUS5_DEV_NUM; + break; + default : + dev_num = DEFAULT_NUM; + break; + } + + + + muxc = i2c_mux_alloc(parent, &pdev->dev, dev_num, 0, 0, + swpld_mux_select, NULL); + if (!muxc) { + ret = -ENOMEM; + goto alloc_failed; + } + muxc->priv = mux; + platform_set_drvdata(pdev, muxc); + + + for (i = 0; i < dev_num; i++) { + int nr = pdata->base_nr + i; + unsigned int class = 0; + + ret = i2c_mux_add_adapter(muxc, nr, i, class); + if (ret) { + dev_err(&pdev->dev, "Failed to add adapter %d\n", i); + goto add_adapter_failed; + } + } + dev_info(&pdev->dev, "%d port mux on %s adapter\n", dev_num, parent->name); + return 0; + +add_adapter_failed: + i2c_mux_del_adapters(muxc); +alloc_failed: + kfree(mux); + i2c_put_adapter(parent); + + return ret; +} +#endif // #if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) static int __exit swpld_mux_remove(struct platform_device *pdev) { int i; @@ -2249,6 +2410,18 @@ static int __exit swpld_mux_remove(struct platform_device *pdev) return 0; } +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int __exit swpld_mux_remove(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc = platform_get_drvdata(pdev); + struct i2c_adapter *parent=muxc->parent; + + i2c_mux_del_adapters(muxc); + i2c_put_adapter(parent); + + return 0; +} +#endif static struct platform_driver swpld_mux_driver = { .probe = swpld_mux_probe, @@ -2261,9 +2434,9 @@ static struct platform_driver swpld_mux_driver = { /*---------------- MUX - end ------------- */ /*---------------- module initialization ------------- */ -static void __init delta_ag9032v1_platform_init(void) +static int __init delta_ag9032v1_platform_init(void) { - struct i2c_client *client; +// struct i2c_client *client; struct i2c_adapter *adapter; struct cpld_platform_data *cpld_pdata; struct swpld_mux_platform_data *swpld_mux_pdata; @@ -2342,7 +2515,7 @@ static void __init delta_ag9032v1_platform_init(void) for (; i >= 0; i--) { platform_device_unregister(&ag9032v1_swpld_mux[i]); } - platform_driver_unregister(&ag9032v1_cpld); + platform_driver_unregister((struct platform_driver *) &ag9032v1_cpld); error_ag9032v1_cpld: platform_driver_unregister(&i2c_device_driver); error_i2c_device_driver: diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/dni_ag9032v1_psu.c b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/dni_ag9032v1_psu.c index e47813af3e09..7d9350bc55bd 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/dni_ag9032v1_psu.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/dni_ag9032v1_psu.c @@ -24,8 +24,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include #include +#include #include #include #include @@ -43,6 +43,7 @@ u8 psu_member_data = 0x00; + /* Address scanned */ static const unsigned short normal_i2c[] = { 0x58, I2C_CLIENT_END }; @@ -419,7 +420,7 @@ static SENSOR_DEVICE_ATTR(temp1_input, \ S_IRUGO, for_linear_data, NULL, PSU_TEMP1_INPUT); static SENSOR_DEVICE_ATTR(fan1_target, \ S_IRUGO, for_fan_target, NULL, PSU_FAN1_FAULT); -static SENSOR_DEVICE_ATTR(fan1_set_percentage, S_IWUGO | S_IRUGO, \ +static SENSOR_DEVICE_ATTR(fan1_set_percentage, S_IWUSR | S_IRUGO, \ for_linear_data, set_fan_duty_cycle_input, PSU_FAN1_DUTY_CYCLE); static SENSOR_DEVICE_ATTR(fan1_input, \ S_IRUGO, for_linear_data, NULL, PSU_FAN1_SPEED); @@ -427,7 +428,7 @@ static SENSOR_DEVICE_ATTR(psu_mfr_model, \ S_IRUGO, for_ascii, NULL, PSU_MFR_MODEL); static SENSOR_DEVICE_ATTR(psu_mfr_serial, \ S_IRUGO, for_ascii, NULL, PSU_MFR_SERIAL); -static SENSOR_DEVICE_ATTR(psu_select_member, S_IWUGO | S_IRUGO, \ +static SENSOR_DEVICE_ATTR(psu_select_member, S_IWUSR | S_IRUGO, \ for_r_member_data, set_w_member_data, PSU_SELECT_MEMBER); static struct attribute *dps_800ab_16_d_attributes[] = { diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/control b/platform/broadcom/sonic-platform-modules-delta/debian/control index 455a5f296ac0..06ac0c80a87d 100644 --- a/platform/broadcom/sonic-platform-modules-delta/debian/control +++ b/platform/broadcom/sonic-platform-modules-delta/debian/control @@ -7,7 +7,7 @@ Standards-Version: 3.9.3 Package: platform-modules-ag9032v1 Architecture: amd64 -Depends: linux-image-3.16.0-5-amd64 +Depends: linux-image-4.9.0-5-amd64 Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-ag9064 diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9032v1.install b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9032v1.install index 40f7e56d832d..beca4f51b1f8 100644 --- a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9032v1.install +++ b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9032v1.install @@ -1,3 +1,4 @@ ag9032v1/scripts/ag9032v1_platform_init.sh usr/local/bin ag9032v1/scripts/led_status.sh usr/local/bin ag9032v1/cfg/ag9032v1-modules.conf etc/modules-load.d +systemd/platform-modules-ag9032v1.service lib/systemd/system diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/rules b/platform/broadcom/sonic-platform-modules-delta/debian/rules index 57383e7241f2..d0398ecaca17 100755 --- a/platform/broadcom/sonic-platform-modules-delta/debian/rules +++ b/platform/broadcom/sonic-platform-modules-delta/debian/rules @@ -8,7 +8,7 @@ MOD_SRC_DIR:= $(shell pwd) MODULE_DIRS:= ag9032v1 ag9064 ag5648 %: - dh $@ + dh $@ --with=systemd override_dh_auto_build: (for mod in $(MODULE_DIRS); do \ diff --git a/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag9032v1.service b/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag9032v1.service new file mode 100644 index 000000000000..bfa0fd296f59 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag9032v1.service @@ -0,0 +1,13 @@ +[Unit] +Description=Delta ag9032v1 Platform modules +After=local-fs.target +Before=pmon.service + +[Service] +Type=oneshot +ExecStart=-/etc/init.d/platform-modules-ag9032v1 start +ExecStop=-/etc/init.d/platform-modules-ag9032v1 stop +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target From 0edb3802b046723fcca597f8832285848098472d Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Thu, 1 Mar 2018 09:24:35 +0000 Subject: [PATCH 091/180] [build]: add stretch target to build in stretch docker --- README.md | 8 +------- platform/broadcom/platform-modules-accton.mk | 1 + platform/broadcom/platform-modules-arista.mk | 2 ++ platform/broadcom/platform-modules-cel.mk | 2 ++ platform/broadcom/platform-modules-dell.mk | 2 ++ platform/broadcom/platform-modules-delta.mk | 2 +- platform/broadcom/platform-modules-ingrasys.mk | 2 ++ platform/broadcom/platform-modules-inventec.mk | 2 ++ platform/broadcom/platform-modules-mitac.mk | 2 ++ platform/broadcom/platform-modules-quanta.mk | 2 +- platform/broadcom/platform-modules-s6000.mk | 2 ++ platform/mellanox/hw-management.mk | 2 ++ platform/mellanox/mft.mk | 2 ++ rules/ixgbe.mk | 2 ++ slave.mk | 2 ++ 15 files changed, 26 insertions(+), 9 deletions(-) diff --git a/README.md b/README.md index 12aafefa44b6..0c9ded3441d8 100644 --- a/README.md +++ b/README.md @@ -80,13 +80,7 @@ The SONiC installer contains all docker images needed. SONiC uses one image for For Broadcom ASIC, we build ONIE and EOS image. EOS image is used for Arista devices, ONIE image is used for all other Broadcom ASIC based devices. make configure PLATFORM=broadcom - BLDENV=stretch make target/debs/linux-headers-4.9.0-3-common_4.9.30-2+deb9u5_all.deb \ - target/debs/sonic-platform-quanta-ix1b-32x_1.0_amd64.deb \ - target/debs/platform-modules-d7032q28b_1.1.0_amd64.deb \ - target/debs/sonic-platform-accton-as7712-32x_1.1_amd64.deb \ - target/debs/sonic-platform-ingrasys-s9100_1.1.0_amd64.deb \ - target/debs/platform-modules-z9100_1.1_amd64.deb \ - target/debs/platform-modules-s6000_1.0_amd64.deb + BLDENV=stretch make stretch # build ONIE image make target/sonic-broadcom.bin diff --git a/platform/broadcom/platform-modules-accton.mk b/platform/broadcom/platform-modules-accton.mk index b09c9559f775..729e76e3ed1d 100755 --- a/platform/broadcom/platform-modules-accton.mk +++ b/platform/broadcom/platform-modules-accton.mk @@ -46,3 +46,4 @@ ACCTON_AS7716_32XB_PLATFORM_MODULE = sonic-platform-accton-as7716-32xb_$(ACCTON_ $(ACCTON_AS7716_32XB_PLATFORM_MODULE)_PLATFORM = x86_64-accton_as7716_32xb-r0 $(eval $(call add_extra_package,$(ACCTON_AS7712_32X_PLATFORM_MODULE),$(ACCTON_AS7716_32XB_PLATFORM_MODULE))) +SONIC_STRETCH_DEBS += $(ACCTON_AS7712_32X_PLATFORM_MODULE) diff --git a/platform/broadcom/platform-modules-arista.mk b/platform/broadcom/platform-modules-arista.mk index 633435c0550a..480aa0cf8396 100644 --- a/platform/broadcom/platform-modules-arista.mk +++ b/platform/broadcom/platform-modules-arista.mk @@ -21,3 +21,5 @@ $(eval $(call add_extra_package,$(ARISTA_PLATFORM_MODULE),$(ARISTA_PLATFORM_MODU export ARISTA_PLATFORM_MODULE ARISTA_PLATFORM_MODULE_PYTHON2 ARISTA_PLATFORM_MODULE_PYTHON3 ARISTA_PLATFORM_MODULE_DRIVERS export ARISTA_SCD_DRIVER_CONFIG=m + +SONIC_STRETCH_DEBS += $(ARISTA_PLATFORM_MODULE) diff --git a/platform/broadcom/platform-modules-cel.mk b/platform/broadcom/platform-modules-cel.mk index 96cb59144fa5..234f2d5399ef 100644 --- a/platform/broadcom/platform-modules-cel.mk +++ b/platform/broadcom/platform-modules-cel.mk @@ -9,3 +9,5 @@ $(CEL_DX010_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules- $(CEL_DX010_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) $(CEL_DX010_PLATFORM_MODULE)_PLATFORM = x86_64-cel_seastone-r0 SONIC_DPKG_DEBS += $(CEL_DX010_PLATFORM_MODULE) + +SONIC_STRETCH_DEBS += $(CEL_DX010_PLATFORM_MODULE) diff --git a/platform/broadcom/platform-modules-dell.mk b/platform/broadcom/platform-modules-dell.mk index f0b5d261e05b..a6b2a9c2c365 100644 --- a/platform/broadcom/platform-modules-dell.mk +++ b/platform/broadcom/platform-modules-dell.mk @@ -15,3 +15,5 @@ SONIC_DPKG_DEBS += $(DELL_Z9100_PLATFORM_MODULE) DELL_S6100_PLATFORM_MODULE = platform-modules-s6100_$(DELL_S6100_PLATFORM_MODULE_VERSION)_amd64.deb $(DELL_S6100_PLATFORM_MODULE)_PLATFORM = x86_64-dell_s6100_c2538-r0 $(eval $(call add_extra_package,$(DELL_Z9100_PLATFORM_MODULE),$(DELL_S6100_PLATFORM_MODULE))) + +SONIC_STRETCH_DEBS += $(DELL_Z9100_PLATFORM_MODULE) diff --git a/platform/broadcom/platform-modules-delta.mk b/platform/broadcom/platform-modules-delta.mk index f1e8562844d4..bc5bf91fd90b 100644 --- a/platform/broadcom/platform-modules-delta.mk +++ b/platform/broadcom/platform-modules-delta.mk @@ -14,7 +14,6 @@ $(DELTA_AG9032V1_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_CO $(DELTA_AG9032V1_PLATFORM_MODULE)_PLATFORM = x86_64-delta_ag9032v1-r0 SONIC_DPKG_DEBS += $(DELTA_AG9032V1_PLATFORM_MODULE) - DELTA_AG9064_PLATFORM_MODULE = platform-modules-ag9064_$(DELTA_AG9064_PLATFORM_MODULE_VERSION)_amd64.deb $(DELTA_AG9064_PLATFORM_MODULE)_PLATFORM = x86_64-delta_ag9064-r0 $(eval $(call add_extra_package,$(DELTA_AG9032V1_PLATFORM_MODULE),$(DELTA_AG9064_PLATFORM_MODULE))) @@ -23,3 +22,4 @@ DELTA_AG5648_PLATFORM_MODULE = platform-modules-ag5648_$(DELTA_AG5648_PLATFORM_M $(DELTA_AG5648_PLATFORM_MODULE)_PLATFORM = x86_64-delta_ag5648-r0 $(eval $(call add_extra_package,$(DELTA_AG9032V1_PLATFORM_MODULE),$(DELTA_AG5648_PLATFORM_MODULE))) +SONIC_STRETCH_DEBS += $(DELTA_AG9032V1_PLATFORM_MODULE) diff --git a/platform/broadcom/platform-modules-ingrasys.mk b/platform/broadcom/platform-modules-ingrasys.mk index f402a7fed1c6..b6195698a1f9 100644 --- a/platform/broadcom/platform-modules-ingrasys.mk +++ b/platform/broadcom/platform-modules-ingrasys.mk @@ -34,3 +34,5 @@ $(eval $(call add_extra_package,$(INGRASYS_S9100_PLATFORM_MODULE),$(INGRASYS_S89 $(eval $(call add_extra_package,$(INGRASYS_S9100_PLATFORM_MODULE),$(INGRASYS_S8900_54XC_PLATFORM_MODULE))) $(eval $(call add_extra_package,$(INGRASYS_S9100_PLATFORM_MODULE),$(INGRASYS_S8810_32Q_PLATFORM_MODULE))) $(eval $(call add_extra_package,$(INGRASYS_S9100_PLATFORM_MODULE),$(INGRASYS_S9200_64X_PLATFORM_MODULE))) + +SONIC_STRETCH_DEBS += $(INGRASYS_S9100_PLATFORM_MODULE) diff --git a/platform/broadcom/platform-modules-inventec.mk b/platform/broadcom/platform-modules-inventec.mk index f4a2e65e5147..0960c2aefbcc 100644 --- a/platform/broadcom/platform-modules-inventec.mk +++ b/platform/broadcom/platform-modules-inventec.mk @@ -15,3 +15,5 @@ SONIC_DPKG_DEBS += $(INVENTEC_D7032Q28B_PLATFORM_MODULE) INVENTEC_D7054Q28B_PLATFORM_MODULE = platform-modules-d7054q28b_$(INVENTEC_D7054Q28B_PLATFORM_MODULE_VERSION)_amd64.deb $(INVENTEC_D7054Q28B_PLATFORM_MODULE)_PLATFORM = x86_64-inventec_d7054q28b-r0 $(eval $(call add_extra_package,$(INVENTEC_D7032Q28B_PLATFORM_MODULE),$(INVENTEC_D7054Q28B_PLATFORM_MODULE))) + +SONIC_STRETCH_DEBS += $(INVENTEC_D7032Q28B_PLATFORM_MODULE) diff --git a/platform/broadcom/platform-modules-mitac.mk b/platform/broadcom/platform-modules-mitac.mk index 07cf8617dd5c..6e7e05bf6c57 100644 --- a/platform/broadcom/platform-modules-mitac.mk +++ b/platform/broadcom/platform-modules-mitac.mk @@ -9,3 +9,5 @@ $(MITAC_LY1200_32X_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-m $(MITAC_LY1200_32X_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) $(MITAC_LY1200_32X_PLATFORM_MODULE)_PLATFORM = x86_64-mitac_ly1200_b32h0_c3-r0 SONIC_DPKG_DEBS += $(MITAC_LY1200_32X_PLATFORM_MODULE) + +SONIC_STRETCH_DEBS += $(MITAC_LY1200_32X_PLATFORM_MODULE) diff --git a/platform/broadcom/platform-modules-quanta.mk b/platform/broadcom/platform-modules-quanta.mk index fe4ebe405673..e1c633cd08f3 100755 --- a/platform/broadcom/platform-modules-quanta.mk +++ b/platform/broadcom/platform-modules-quanta.mk @@ -10,4 +10,4 @@ $(QUANTA_IX1B_32X_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_C $(QUANTA_IX1B_32X_PLATFORM_MODULE)_PLATFORM = x86_64-quanta_ix1b_32x-r0 SONIC_DPKG_DEBS += $(QUANTA_IX1B_32X_PLATFORM_MODULE) - +SONIC_STRETCH_DEBS += $(QUANTA_IX1B_32X_PLATFORM_MODULE) diff --git a/platform/broadcom/platform-modules-s6000.mk b/platform/broadcom/platform-modules-s6000.mk index d2c105ffdc8d..00cd2cadf2d3 100644 --- a/platform/broadcom/platform-modules-s6000.mk +++ b/platform/broadcom/platform-modules-s6000.mk @@ -9,3 +9,5 @@ $(DELL_S6000_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules $(DELL_S6000_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) $(DELL_S6000_PLATFORM_MODULE)_PLATFORM = x86_64-dell_s6000_s1220-r0 SONIC_DPKG_DEBS += $(DELL_S6000_PLATFORM_MODULE) + +SONIC_STRETCH_DEBS += $(DELL_S6000_PLATFORM_MODULE) diff --git a/platform/mellanox/hw-management.mk b/platform/mellanox/hw-management.mk index b165390cea56..ee5f923058e5 100644 --- a/platform/mellanox/hw-management.mk +++ b/platform/mellanox/hw-management.mk @@ -8,3 +8,5 @@ MLNX_HW_MANAGEMENT = hw-management_1.mlnx.$(MLNX_HW_MANAGEMENT_VERSION)_amd64.de $(MLNX_HW_MANAGEMENT)_SRC_PATH = $(PLATFORM_PATH)/hw-management $(MLNX_HW_MANAGEMENT)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) SONIC_DPKG_DEBS += $(MLNX_HW_MANAGEMENT) + +SONIC_STRETCH_DEBS += $(MLNX_HW_MANAGEMENT) diff --git a/platform/mellanox/mft.mk b/platform/mellanox/mft.mk index 559ff3b4cd99..9e4c08a33519 100644 --- a/platform/mellanox/mft.mk +++ b/platform/mellanox/mft.mk @@ -15,3 +15,5 @@ $(eval $(call add_derived_package,$(MFT),$(KERNEL_MFT))) MFT_OEM = mft-oem-$(MFT_VERSION)-$(MFT_REVISION).amd64.deb $(eval $(call add_derived_package,$(MFT),$(MFT_OEM))) + +SONIC_STRETCH_DEBS += $(KERNEL_MFT) diff --git a/rules/ixgbe.mk b/rules/ixgbe.mk index 8819cd0018a3..c9ce6d97ad63 100644 --- a/rules/ixgbe.mk +++ b/rules/ixgbe.mk @@ -7,3 +7,5 @@ IXGBE_DRIVER = ixgbe.ko $(IXGBE_DRIVER)_SRC_PATH = $(SRC_PATH)/ixgbe $(IXGBE_DRIVER)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) SONIC_MAKE_DEBS += $(IXGBE_DRIVER) + +SONIC_STRETCH_DEBS += $(IXGBE_DRIVER) diff --git a/slave.mk b/slave.mk index c10b9c877e35..d6ce78e6f19c 100644 --- a/slave.mk +++ b/slave.mk @@ -587,6 +587,8 @@ clean : .platform clean-logs $$(SONIC_CLEAN_DEBS) $$(SONIC_CLEAN_FILES) $$(SONIC all : .platform $$(addprefix $(TARGET_PATH)/,$$(SONIC_ALL)) +stretch : $$(addprefix $(DEBS_PATH)/,$$(SONIC_STRETCH_DEBS)) + ############################################################################### ## Standard targets ############################################################################### From 5364926b4574a0f3b8e58b37e57c47b046b9cf3a Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Thu, 1 Mar 2018 09:52:00 +0000 Subject: [PATCH 092/180] [build]: build initramfs, libwrap, tacacs packages under stretch docker initramfs/libwrap/tacacs packages are installed on stretch base image --- rules/initramfs-tools.mk | 2 ++ rules/libwrap.mk | 4 +++- rules/tacacs.mk | 2 ++ sonic-slave-stretch/Dockerfile | 2 ++ 4 files changed, 9 insertions(+), 1 deletion(-) diff --git a/rules/initramfs-tools.mk b/rules/initramfs-tools.mk index 9fbeb249a6b0..974da74b028c 100644 --- a/rules/initramfs-tools.mk +++ b/rules/initramfs-tools.mk @@ -6,3 +6,5 @@ export INITRAMFS_TOOLS_VERSION INITRAMFS_TOOLS = initramfs-tools_$(INITRAMFS_TOOLS_VERSION)_all.deb $(INITRAMFS_TOOLS)_SRC_PATH = $(SRC_PATH)/initramfs-tools SONIC_MAKE_DEBS += $(INITRAMFS_TOOLS) + +SONIC_STRETCH_DEBS += $(INITRAMFS_TOOLS) diff --git a/rules/libwrap.mk b/rules/libwrap.mk index aab8e959d143..20a4b5ed204b 100644 --- a/rules/libwrap.mk +++ b/rules/libwrap.mk @@ -1,6 +1,6 @@ # libwrap packages -LIBWRAP_VERSION = 7.6.q-25 +LIBWRAP_VERSION = 7.6.q-26 export LIBWRAP_VERSION @@ -10,3 +10,5 @@ SONIC_MAKE_DEBS += $(LIBWRAP) TCPD = tcpd_$(LIBWRAP_VERSION)_amd64.deb $(eval $(call add_derived_package,$(LIBWRAP),$(TCPD))) + +SONIC_STRETCH_DEBS += $(LIBWRAP) diff --git a/rules/tacacs.mk b/rules/tacacs.mk index e31f52d9ab5d..649f6af080ed 100644 --- a/rules/tacacs.mk +++ b/rules/tacacs.mk @@ -27,3 +27,5 @@ $(LIBNSS_TACPLUS)_DEPENDS += $(LIBTAC_DEV) $(LIBNSS_TACPLUS)_RDEPENDS += $(LIBTAC2) $(LIBNSS_TACPLUS)_SRC_PATH = $(SRC_PATH)/tacacs/nss SONIC_MAKE_DEBS += $(LIBNSS_TACPLUS) + +SONIC_STRETCH_DEBS += $(LIBPAM_TACPLUS) $(LIBNSS_TACPLUS) diff --git a/sonic-slave-stretch/Dockerfile b/sonic-slave-stretch/Dockerfile index 3b1a333f4831..4f7582efa0b4 100644 --- a/sonic-slave-stretch/Dockerfile +++ b/sonic-slave-stretch/Dockerfile @@ -198,6 +198,8 @@ RUN apt-get update && apt-get install -y \ # For gtest libgtest-dev \ cmake \ +# For pam_tacplus build + autoconf-archive \ # For initramfs bash-completion From 689bbd2b7211367294a7b1e4424eda7e2c03479b Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 3 Mar 2018 09:10:18 +0000 Subject: [PATCH 093/180] [broadcom]: update opennsl module to 3.4.1.11-1 --- platform/broadcom/sdk.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/platform/broadcom/sdk.mk b/platform/broadcom/sdk.mk index 12b0262b9305..a74db331aba7 100644 --- a/platform/broadcom/sdk.mk +++ b/platform/broadcom/sdk.mk @@ -1,4 +1,4 @@ -BRCM_OPENNSL_KERNEL = opennsl-modules-4.9.0-5-amd64_3.2.3.7-1_amd64.deb -$(BRCM_OPENNSL_KERNEL)_URL = "https://sonicstorage.blob.core.windows.net/packages/opennsl-modules-4.9.0-5-amd64_3.2.3.7-1_amd64.deb?sv=2015-04-05&sr=b&sig=nju9vaqIjRlzV7V0wirMP6%2FNCJRsNqC%2FdqdqgxA0wrQ%3D&se=2154-12-03T07%3A37%3A17Z&sp=r" +BRCM_OPENNSL_KERNEL = opennsl-modules-4.9.0-5-amd64_3.4.1.11-1_amd64.deb +$(BRCM_OPENNSL_KERNEL)_URL = "https://sonicstorage.blob.core.windows.net/packages/opennsl-modules-4.9.0-5-amd64_3.4.1.11-1_amd64.deb?sv=2015-04-05&sr=b&sig=vdIqSXaJhvN7Blk08WyxWhfMxky0XBx37JYAmNozx3k%3D&se=2155-01-24T09%3A08%3A25Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_OPENNSL_KERNEL) From 91891af27e939741614bc2f0af809ddd0a8061ed Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 3 Mar 2018 18:26:12 +0000 Subject: [PATCH 094/180] [bug fix]: fix delta ag9032v1 driver compilation. disable ag9064 --- .../ag9032v1/modules/delta_ag9032v1_cpupld.c | 4 ++-- .../ag9032v1/modules/delta_ag9032v1_platform.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_cpupld.c b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_cpupld.c index 3c8c8f8c4646..ba920f7558df 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_cpupld.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_cpupld.c @@ -348,7 +348,7 @@ static struct platform_driver cpld_driver = { /*---------------- module initialization ------------- */ -static void __init delta_ag9032v1_cpupld_init(void) +static int __init delta_ag9032v1_cpupld_init(void) { int ret; printk(KERN_WARNING "ag9032v1_platform_cpupld module initialization\n"); @@ -384,4 +384,4 @@ module_exit(delta_ag9032v1_cpupld_exit); MODULE_DESCRIPTION("DNI ag9032v1 CPLD Platform Support"); MODULE_AUTHOR("Stanley Chi "); -MODULE_LICENSE("GPL"); \ No newline at end of file +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c index 982110236272..520a935561ab 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c @@ -1613,7 +1613,7 @@ static ssize_t set_swpld_data(struct device *dev, struct device_attribute *dev_a int val; u8 mask_out; - ret = kstrtoul(buf, 0, &val); + ret = kstrtoint(buf, 0, &val); if (ret) { From 0d2ffd885f8e805cf595b00d2a1d10edb371fd69 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 5 Mar 2018 07:07:40 +0000 Subject: [PATCH 095/180] [baseimage]: move update initramfs to later stage some platform drivers install blacklist.conf in /etc/modprobe.d. Those configuration should be proprogated into initramfs to avoid loading those blacklisted driver. --- build_debian.sh | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/build_debian.sh b/build_debian.sh index 05eb3d91fcee..c5368c4a2229 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -150,7 +150,6 @@ sudo chmod +x $FILESYSTEM_ROOT/etc/initramfs-tools/scripts/init-bottom/mgmt-intf sudo cp files/initramfs-tools/union-fsck $FILESYSTEM_ROOT/etc/initramfs-tools/hooks/union-fsck sudo chmod +x $FILESYSTEM_ROOT/etc/initramfs-tools/hooks/union-fsck pushd $FILESYSTEM_ROOT/usr/share/initramfs-tools/scripts/init-bottom && sudo patch -p1 < $OLDPWD/files/initramfs-tools/udev.patch; popd -sudo chroot $FILESYSTEM_ROOT update-initramfs -u ## Install latest intel ixgbe driver sudo cp target/debs/ixgbe.ko $FILESYSTEM_ROOT/lib/modules/${LINUX_KERNEL_VERSION}-amd64/kernel/drivers/net/ethernet/intel/ixgbe/ixgbe.ko @@ -369,6 +368,9 @@ if [ "${enable_organization_extensions}" = "y" ]; then fi fi +## Update initramfs +sudo chroot $FILESYSTEM_ROOT update-initramfs -u + ## Clean up apt sudo LANG=C chroot $FILESYSTEM_ROOT apt-get autoremove sudo LANG=C chroot $FILESYSTEM_ROOT apt-get autoclean From 764a7edd83685a2245e436c8ce5e36f407434084 Mon Sep 17 00:00:00 2001 From: Samuel Angebault Date: Tue, 27 Mar 2018 09:32:05 -0700 Subject: [PATCH 096/180] [device]: Enable arista drivers for sonic-linux-kernel 4.9 (#21) * Enable arista drivers * Add vfat ascii charset in initramfs * Update boot0.j2 for 4.9 kernel * Fix i2c offsets in sensors.conf * Bump sonic-platform-modules-arista submodule --- .../x86_64-arista_7050_qx32/sensors.conf | 20 +++++++++---------- files/Aboot/boot0.j2 | 6 ++++-- files/initramfs-tools/modules | 1 + platform/broadcom/rules.mk | 2 +- .../broadcom/sonic-platform-modules-arista | 2 +- 5 files changed, 17 insertions(+), 14 deletions(-) diff --git a/device/arista/x86_64-arista_7050_qx32/sensors.conf b/device/arista/x86_64-arista_7050_qx32/sensors.conf index 481c9ec30114..8b6ca752fe83 100644 --- a/device/arista/x86_64-arista_7050_qx32/sensors.conf +++ b/device/arista/x86_64-arista_7050_qx32/sensors.conf @@ -2,21 +2,21 @@ # ------------------------------------------------ # -bus "i2c-2" "SCD 0000:04:00.0 SMBus master 0 bus 0" -bus "i2c-3" "SCD 0000:04:00.0 SMBus master 0 bus 1" -bus "i2c-5" "SCD 0000:04:00.0 SMBus master 0 bus 3" -bus "i2c-6" "SCD 0000:04:00.0 SMBus master 0 bus 4" -bus "i2c-7" "SCD 0000:04:00.0 SMBus master 0 bus 5" +bus "i2c-5" "SCD 0000:04:00.0 SMBus master 0 bus 0" +bus "i2c-6" "SCD 0000:04:00.0 SMBus master 0 bus 1" +bus "i2c-8" "SCD 0000:04:00.0 SMBus master 0 bus 3" +bus "i2c-9" "SCD 0000:04:00.0 SMBus master 0 bus 4" +bus "i2c-10" "SCD 0000:04:00.0 SMBus master 0 bus 5" chip "k10temp-pci-00c3" label temp1 "Cpu temp sensor" -chip "lm73-i2c-3-48" +chip "lm73-i2c-6-48" label temp1 "Back panel temp sensor" set temp1_max 65 #set temp1_max_alarm 75 # read-only -chip "max6658-i2c-2-4c" +chip "max6658-i2c-5-4c" label temp1 "Board temp sensor" set temp1_max 65 set temp1_crit 75 @@ -26,7 +26,7 @@ chip "max6658-i2c-2-4c" set temp2_crit 75 # disabled because of some eeprom corruption risks -#chip "pmbus-i2c-3-4e" +#chip "pmbus-i2c-6-4e" # label temp1 "Power controller sensor 1" # set temp1_max 60 # set temp1_crit 70 @@ -37,7 +37,7 @@ chip "max6658-i2c-2-4c" # ignore curr1 -chip "dps460-i2c-5-58" +chip "dps460-i2c-8-58" label temp1 "Power supply 1 inlet temp sensor" # maximum and critical thresholds are not supported for this psu set temp1_max 60 @@ -59,7 +59,7 @@ chip "dps460-i2c-5-58" set curr2_max 36 set curr2_crit 37 -chip "dps460-i2c-6-58" +chip "dps460-i2c-9-58" label temp1 "Power supply 2 inlet temp sensor" # maximum and critical thresholds are not supported for this psu set temp1_max 60 diff --git a/files/Aboot/boot0.j2 b/files/Aboot/boot0.j2 index ab2cdedb6383..94f9b760352d 100644 --- a/files/Aboot/boot0.j2 +++ b/files/Aboot/boot0.j2 @@ -153,12 +153,12 @@ platform_specific() { if [ "$platform" = "raven" ]; then aboot_machine=arista_7050_qx32 flash_size=2000 - echo "modprobe.blacklist=radeon" >>/tmp/append + echo "modprobe.blacklist=radeon,sp5100_tco acpi=off" >>/tmp/append fi if [ "$platform" = "crow" ]; then aboot_machine=arista_7050_qx32s flash_size=3700 - echo "modprobe.blacklist=radeon" >>/tmp/append + echo "modprobe.blacklist=radeon,sp5100_tco" >>/tmp/append fi if [ "$sid" = "Upperlake" ] || [ "$sid" = "UpperlakeES" ]; then aboot_machine=arista_7060_cx32s @@ -191,6 +191,8 @@ platform_specific() { fi echo "varlog_size=$varlog_size" >>/tmp/append + # disable deterministic interface naming + echo "net.ifnames=0" >>/tmp/append } get_uuid_for() { diff --git a/files/initramfs-tools/modules b/files/initramfs-tools/modules index 33f28b98b3f7..e7fcbef870d2 100644 --- a/files/initramfs-tools/modules +++ b/files/initramfs-tools/modules @@ -1,5 +1,6 @@ squashfs overlay vfat +nls_ascii nls_cp437 nls_utf8 diff --git a/platform/broadcom/rules.mk b/platform/broadcom/rules.mk index a065506a4287..582af46b86a9 100755 --- a/platform/broadcom/rules.mk +++ b/platform/broadcom/rules.mk @@ -2,7 +2,7 @@ include $(PLATFORM_PATH)/sdk.mk include $(PLATFORM_PATH)/sai.mk include $(PLATFORM_PATH)/platform-modules-s6000.mk include $(PLATFORM_PATH)/platform-modules-dell.mk -#include $(PLATFORM_PATH)/platform-modules-arista.mk +include $(PLATFORM_PATH)/platform-modules-arista.mk include $(PLATFORM_PATH)/platform-modules-ingrasys.mk include $(PLATFORM_PATH)/platform-modules-accton.mk include $(PLATFORM_PATH)/platform-modules-inventec.mk diff --git a/platform/broadcom/sonic-platform-modules-arista b/platform/broadcom/sonic-platform-modules-arista index 8f65ad92c5b5..a7edec0e19e6 160000 --- a/platform/broadcom/sonic-platform-modules-arista +++ b/platform/broadcom/sonic-platform-modules-arista @@ -1 +1 @@ -Subproject commit 8f65ad92c5b5dfec24e8faf068cc9d2374244edf +Subproject commit a7edec0e19e63b4ec437d32928a5362a6d0a9bc9 From cbf204ba014ca670b4223f2e36c42afd32c20d09 Mon Sep 17 00:00:00 2001 From: hans-tseng Date: Wed, 28 Mar 2018 00:33:25 +0800 Subject: [PATCH 097/180] [device]: add the new platform ag9064 (#23) Signed-off-by: hans --- .../plugins/sfputil.py | 10 +- .../Delta-ag9064/port_config.ini | 132 ++- .../modules/delta_ag9032v1_platform.c | 2 +- .../ag9064/modules/delta_ag9064_platform.c | 758 +++++++++++++++++- .../ag9064/modules/i2c-mei_main.c | 3 +- .../debian/control | 2 +- .../debian/platform-modules-ag9064.init | 4 +- .../debian/platform-modules-ag9064.install | 1 + .../systemd/platform-modules-ag9064.service | 13 + 9 files changed, 840 insertions(+), 85 deletions(-) create mode 100644 platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag9064.service diff --git a/device/delta/x86_64-delta_ag9032v1-r0/plugins/sfputil.py b/device/delta/x86_64-delta_ag9032v1-r0/plugins/sfputil.py index 54d69446b1d8..dc5f8037f26a 100644 --- a/device/delta/x86_64-delta_ag9032v1-r0/plugins/sfputil.py +++ b/device/delta/x86_64-delta_ag9032v1-r0/plugins/sfputil.py @@ -51,7 +51,7 @@ def get_presence(self, port_num): return False try: - reg_file = open("/sys/devices/platform/delta-ag9032v1-cpld.0/sfp_present") + reg_file = open("/sys/devices/platform/delta-ag9032v1-swpld.0/sfp_present") except IOError as e: print "Error: unable to open file: %s" % str(e) return False @@ -76,7 +76,7 @@ def get_low_power_mode(self, port_num): return False try: - reg_file = open("/sys/devices/platform/delta-ag9032v1-cpld.0/sfp_lpmode") + reg_file = open("/sys/devices/platform/delta-ag9032v1-swpld.0/sfp_lpmode") except IOError as e: print "Error: unable to open file: %s" % str(e) @@ -100,7 +100,7 @@ def set_low_power_mode(self, port_num, lpmode): return False try: - reg_file = open("/sys/devices/platform/delta-ag9032v1-cpld.0/sfp_lpmode", "r+") + reg_file = open("/sys/devices/platform/delta-ag9032v1-swpld.0/sfp_lpmode", "r+") except IOError as e: print "Error: unable to open file: %s" % str(e) return False @@ -129,7 +129,7 @@ def set_low_power_mode(self, port_num, lpmode): return True def reset(self, port_num): - QSFP_RESET_REGISTER_DEVICE_FILE = "/sys/devices/platform/delta-ag9032v1-cpld.0/sfp_reset" + QSFP_RESET_REGISTER_DEVICE_FILE = "/sys/devices/platform/delta-ag9032v1-swpld.0/sfp_reset" # Check for invalid port_num if port_num < self.port_start or port_num > self.port_end: @@ -172,4 +172,4 @@ def reset(self, port_num): reg_file.write(hex(reg_value)) reg_file.close() - return True \ No newline at end of file + return True diff --git a/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/port_config.ini b/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/port_config.ini index 2c4eb341369e..be43857f82b1 100644 --- a/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/port_config.ini +++ b/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/port_config.ini @@ -1,67 +1,65 @@ -# name lanes alias index -Ethernet0 49,50,51,52 Ethernet1/1 1 -Ethernet4 53,54,55,56 Ethernet2/1 2 -Ethernet8 65,66,67,68 Ethernet3/1 3 -Ethernet12 69,70,71,72 Ethernet4/1 4 -Ethernet16 81,82,83,84 Ethernet5/1 5 -Ethernet20 85,86,87,88 Ethernet6/1 6 -Ethernet24 1,2,3,4 Ethernet7/1 7 -Ethernet28 101,102,103,104 Ethernet8/1 8 -Ethernet32 5,6,7,8 Ethernet9/1 9 -Ethernet36 17,18,19,20 Ethernet10/1 10 -Ethernet40 21,22,23,24 Ethernet11/1 11 -Ethernet44 33,34,35,36 Ethernet12/1 12 -Ethernet48 37,38,39,40 Ethernet13/1 13 -Ethernet52 97,98,99,100 Ethernet14/1 14 -Ethernet56 113,114,115,116 Ethernet15/1 15 -Ethernet60 117,118,119,120 Ethernet16/1 16 -Ethernet64 129,130,131,132 Ethernet17/1 17 -Ethernet68 133,134,135,136 Ethernet18/1 18 -Ethernet72 145,146,147,148 Ethernet19/1 19 -Ethernet76 209,210,211,212 Ethernet20/1 20 -Ethernet80 213,214,215,216 Ethernet21/1 21 -Ethernet84 225,226,227,228 Ethernet22/1 22 -Ethernet88 229,230,231,232 Ethernet23/1 23 -Ethernet92 241,242,243,244 Ethernet24/1 24 -Ethernet96 245,246,247,248 Ethernet25/1 25 -Ethernet100 157,158,159,160 Ethernet26/1 26 -Ethernet104 161,162,163,164 Ethernet27/1 27 -Ethernet108 165,166,167,168 Ethernet28/1 28 -Ethernet112 177,178,179,180 Ethernet29/1 29 -Ethernet116 181,182,183,184 Ethernet30/1 30 -Ethernet120 193,194,195,196 Ethernet31/1 31 -Ethernet124 197,198,199,200 Ethernet32/1 32 -Ethernet128 61,62,63,64 Ethernet33/1 33 -Ethernet132 57,58,59,60 Ethernet34/1 34 -Ethernet136 77,78,79,80 Ethernet35/1 35 -Ethernet140 73,74,75,76 Ethernet36/1 36 -Ethernet144 93,94,95,96 Ethernet37/1 37 -Ethernet148 89,90,91,92 Ethernet38/1 38 -Ethernet152 105,106,107,108 Ethernet39/1 39 -Ethernet156 9,10,11,12 Ethernet40/1 40 -Ethernet160 25,26,27,28 Ethernet41/1 41 -Ethernet164 13,14,15,16 Ethernet42/1 42 -Ethernet168 41,42,43,44 Ethernet43/1 43 -Ethernet172 29,30,31,32 Ethernet44/1 44 -Ethernet176 45,46,47,48 Ethernet45/1 45 -Ethernet180 109,110,111,112 Ethernet46/1 46 -Ethernet184 125,126,127,128 Ethernet47/1 47 -Ethernet188 121,122,123,124 Ethernet48/1 48 -Ethernet192 141,142,143,144 Ethernet49/1 49 -Ethernet196 137,138,139,140 Ethernet50/1 50 -Ethernet200 217,218,219,220 Ethernet51/1 51 -Ethernet204 149,150,151,152 Ethernet52/1 52 -Ethernet208 233,234,235,236 Ethernet53/1 53 -Ethernet212 221,222,223,224 Ethernet54/1 54 -Ethernet216 249,250,251,252 Ethernet55/1 55 -Ethernet220 237,238,239,240 Ethernet56/1 56 -Ethernet224 153,154,155,156 Ethernet57/1 57 -Ethernet228 253,254,255,256 Ethernet58/1 58 -Ethernet232 173,174,175,176 Ethernet59/1 59 -Ethernet236 169,170,171,172 Ethernet60/1 60 -Ethernet240 189,190,191,192 Ethernet61/1 61 -Ethernet244 185,186,187,188 Ethernet62/1 62 -Ethernet248 205,206,207,208 Ethernet63/1 63 -Ethernet252 201,202,203,204 Ethernet64/1 64 -Ethernet256 257 Ethernet65 65 -Ethernet260 259 Ethernet66 66 +# name lanes alias +Ethernet0 49,50,51,52 Ethernet1/1 +Ethernet4 53,54,55,56 Ethernet2/1 +Ethernet8 65,66,67,68 Ethernet3/1 +Ethernet12 69,70,71,72 Ethernet4/1 +Ethernet16 81,82,83,84 Ethernet5/1 +Ethernet20 85,86,87,88 Ethernet6/1 +Ethernet24 1,2,3,4 Ethernet7/1 +Ethernet28 101,102,103,104 Ethernet8/1 +Ethernet32 5,6,7,8 Ethernet9/1 +Ethernet36 17,18,19,20 Ethernet10/1 +Ethernet40 21,22,23,24 Ethernet11/1 +Ethernet44 33,34,35,36 Ethernet12/1 +Ethernet48 37,38,39,40 Ethernet13/1 +Ethernet52 97,98,99,100 Ethernet14/1 +Ethernet56 113,114,115,116 Ethernet15/1 +Ethernet60 117,118,119,120 Ethernet16/1 +Ethernet64 129,130,131,132 Ethernet17/1 +Ethernet68 133,134,135,136 Ethernet18/1 +Ethernet72 145,146,147,148 Ethernet19/1 +Ethernet76 209,210,211,212 Ethernet20/1 +Ethernet80 213,214,215,216 Ethernet21/1 +Ethernet84 225,226,227,228 Ethernet22/1 +Ethernet88 229,230,231,232 Ethernet23/1 +Ethernet92 241,242,243,244 Ethernet24/1 +Ethernet96 245,246,247,248 Ethernet25/1 +Ethernet100 157,158,159,160 Ethernet26/1 +Ethernet104 161,162,163,164 Ethernet27/1 +Ethernet108 165,166,167,168 Ethernet28/1 +Ethernet112 177,178,179,180 Ethernet29/1 +Ethernet116 181,182,183,184 Ethernet30/1 +Ethernet120 193,194,195,196 Ethernet31/1 +Ethernet124 197,198,199,200 Ethernet32/1 +Ethernet128 61,62,63,64 Ethernet33/1 +Ethernet132 57,58,59,60 Ethernet34/1 +Ethernet136 77,78,79,80 Ethernet35/1 +Ethernet140 73,74,75,76 Ethernet36/1 +Ethernet144 93,94,95,96 Ethernet37/1 +Ethernet148 89,90,91,92 Ethernet38/1 +Ethernet152 105,106,107,108 Ethernet39/1 +Ethernet156 9,10,11,12 Ethernet40/1 +Ethernet160 25,26,27,28 Ethernet41/1 +Ethernet164 13,14,15,16 Ethernet42/1 +Ethernet168 41,42,43,44 Ethernet43/1 +Ethernet172 29,30,31,32 Ethernet44/1 +Ethernet176 45,46,47,48 Ethernet45/1 +Ethernet180 109,110,111,112 Ethernet46/1 +Ethernet184 125,126,127,128 Ethernet47/1 +Ethernet188 121,122,123,124 Ethernet48/1 +Ethernet192 141,142,143,144 Ethernet49/1 +Ethernet196 137,138,139,140 Ethernet50/1 +Ethernet200 217,218,219,220 Ethernet51/1 +Ethernet204 149,150,151,152 Ethernet52/1 +Ethernet208 233,234,235,236 Ethernet53/1 +Ethernet212 221,222,223,224 Ethernet54/1 +Ethernet216 249,250,251,252 Ethernet55/1 +Ethernet220 237,238,239,240 Ethernet56/1 +Ethernet224 153,154,155,156 Ethernet57/1 +Ethernet228 253,254,255,256 Ethernet58/1 +Ethernet232 173,174,175,176 Ethernet59/1 +Ethernet236 169,170,171,172 Ethernet60/1 +Ethernet240 189,190,191,192 Ethernet61/1 +Ethernet244 185,186,187,188 Ethernet62/1 +Ethernet248 205,206,207,208 Ethernet63/1 +Ethernet252 201,202,203,204 Ethernet64/1 diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c index 520a935561ab..20a91db4c0f9 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9032v1/modules/delta_ag9032v1_platform.c @@ -554,7 +554,7 @@ static int __exit i2c_deivce_remove(struct platform_device *pdev) } if (pdata->client) { - parent = i2c_get_adapter(pdata->parent); + parent = (pdata->client)->adapter; i2c_unregister_device(pdata->client); i2c_put_adapter(parent); } diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_platform.c b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_platform.c index 38fb82d443c7..f4222907d4f2 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_platform.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_platform.c @@ -776,7 +776,7 @@ static int __exit i2c_deivce_remove(struct platform_device *pdev) } if (pdata->client) { - parent = i2c_get_adapter(pdata->parent); + parent = (pdata->client)->adapter; i2c_unregister_device(pdata->client); i2c_put_adapter(parent); } @@ -799,7 +799,7 @@ static struct platform_driver i2c_device_driver = { struct swpld_mux_platform_data { int parent; int base_nr; - struct i2c_client *cpld; +// struct i2c_client *cpld; }; struct swpld_mux { @@ -812,7 +812,7 @@ static struct swpld_mux_platform_data ag9064_swpld_mux_platform_data[] = { { .parent = BUS9, .base_nr = BUS9_BASE_NUM, - .cpld = NULL, +// .cpld = NULL, }, }; @@ -827,11 +827,36 @@ static struct platform_device ag9064_swpld_mux[] = }, }, }; - +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) static int swpld_mux_select(struct i2c_adapter *adap, void *data, u8 chan) { + uint8_t cmd_data[4]={0}; struct swpld_mux *mux = data; + uint8_t set_cmd; + int cmd_data_len; + + if ( mux->data.base_nr == BUS9_BASE_NUM ) + { + set_cmd = CMD_SETDATA; + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_PORT_MUX_REG; + cmd_data[3] = chan + 1; + cmd_data_len = sizeof(cmd_data); + // return 0; + return dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + } + else + { + printk(KERN_ERR "Swpld mux QSFP select port error\n"); + return 0; + } +} +#else +static int swpld_mux_select(struct i2c_mux_core *muxc, u32 chan) +{ uint8_t cmd_data[4]={0}; + struct swpld_mux *mux = i2c_mux_priv(muxc); uint8_t set_cmd; int cmd_data_len; @@ -844,14 +869,18 @@ static int swpld_mux_select(struct i2c_adapter *adap, void *data, u8 chan) cmd_data[3] = chan + 1; cmd_data_len = sizeof(cmd_data); return dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + return 0; } else { printk(KERN_ERR "Swpld mux QSFP select port error\n"); return 0; } + } +#endif +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) static int __init swpld_mux_probe(struct platform_device *pdev) { struct swpld_mux *mux; @@ -926,7 +955,76 @@ static int __init swpld_mux_probe(struct platform_device *pdev) return ret; } +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int __init swpld_mux_probe(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc; + struct swpld_mux *mux; + struct swpld_mux_platform_data *pdata; + struct i2c_adapter *parent; + int i, ret, dev_num; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "SWPLD platform data not found\n"); + return -ENODEV; + } + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) { + printk(KERN_ERR "Failed to allocate memory for mux\n"); + return -ENOMEM; + } + mux->data = *pdata; + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + kfree(mux); + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", pdata->parent); + return -ENODEV; + } + /* Judge bus number to decide how many devices*/ + switch (pdata->parent) { + case BUS9: + dev_num = BUS9_DEV_NUM; + break; + default : + dev_num = DEFAULT_NUM; + break; + } + + muxc = i2c_mux_alloc(parent, &pdev->dev, dev_num, 0, 0,swpld_mux_select, NULL); + if (!muxc) { + ret = -ENOMEM; + goto alloc_failed; + } + muxc->priv = mux; + platform_set_drvdata(pdev, muxc); + + for (i = 0; i < dev_num; i++) + { + int nr = pdata->base_nr + i; + unsigned int class = 0; + ret = i2c_mux_add_adapter(muxc, nr, i, class); + if (ret) { + dev_err(&pdev->dev, "Failed to add adapter %d\n", i); + goto add_adapter_failed; + } + } + dev_info(&pdev->dev, "%d port mux on %s adapter\n", dev_num, parent->name); + return 0; + +add_adapter_failed: + i2c_mux_del_adapters(muxc); +alloc_failed2: + kfree(mux); +alloc_failed: + i2c_put_adapter(parent); + + return ret; +} +#endif +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) static int __exit swpld_mux_remove(struct platform_device *pdev) { int i; @@ -966,6 +1064,18 @@ static int __exit swpld_mux_remove(struct platform_device *pdev) return 0; } +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int __exit swpld_mux_remove(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc = platform_get_drvdata(pdev); + struct i2c_adapter *parent=muxc->parent; + + i2c_mux_del_adapters(muxc); + i2c_put_adapter(parent); + + return 0; +} +#endif static struct platform_driver swpld_mux_driver = { .probe = swpld_mux_probe, @@ -977,13 +1087,627 @@ static struct platform_driver swpld_mux_driver = { }; /*---------------- MUX - end ------------- */ +/*---------------- CPLD - start ------------- */ + +/* CPLD -- device */ + +static ssize_t get_present(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + uint8_t cmd_data[4]={0}; + int ret; + u64 data = 0; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_PRESENCE_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + ret=0; + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_PRESENCE_2; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); +// ret=0; + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_PRESENCE_3; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_PRESENCE_4; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_PRESENCE_5; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_PRESENCE_6; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_PRESENCE_7; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_PRESENCE_8; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t get_lpmode(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + uint8_t cmd_data[4]={0}; + int ret; + u64 data = 0; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + ret=0; + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_LP_MODE_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_LP_MODE_2; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_LP_MODE_3; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_LP_MODE_4; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_LP_MODE_5; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_LP_MODE_6; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_LP_MODE_7; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_LP_MODE_8; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t get_reset(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + uint8_t cmd_data[4]={0}; + int ret; + u64 data = 0; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESET_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret=0; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESET_2; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESET_3; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESET_4; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESET_5; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESET_6; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESET_7; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESET_8; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t get_response(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + uint8_t cmd_data[4]={0}; + int ret; + u64 data = 0; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESPONSE_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret = 0; + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESPONSE_2; + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESPONSE_3; + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESPONSE_4; + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESPONSE_5; + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESPONSE_6; + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESPONSE_7; + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESPONSE_8; + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t get_interrupt(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + uint8_t cmd_data[4]={0}; + int ret; + u64 data = 0; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_INTERRUPT_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret=0; + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_INTERRUPT_2; + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_INTERRUPT_3; + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_INTERRUPT_4; + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_INTERRUPT_5; + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_INTERRUPT_6; + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_INTERRUPT_7; + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_INTERRUPT_8; + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + + +static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + uint8_t cmd_data[4]={0}; + unsigned long long set_data; + int err; + + err = kstrtoull(buf, 16, &set_data); + if (err){ + return err; + } + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_SETDATA; + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_LP_MODE_1; + cmd_data[3] = (set_data & 0xff); + cmd_data_len = sizeof(cmd_data); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_LP_MODE_2; + cmd_data[3] = ((set_data >> 8 ) & 0xff); + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_LP_MODE_3; + cmd_data[3] = ((set_data >> 16 ) & 0xff); + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_LP_MODE_4; + cmd_data[3] = ((set_data >> 24 ) & 0xff); + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_LP_MODE_5; + cmd_data[3] = ((set_data >> 32 ) & 0xff); + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_LP_MODE_6; + cmd_data[3] = ((set_data >> 40 ) & 0xff); + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_LP_MODE_7; + cmd_data[3] = ((set_data >> 48 ) & 0xff); + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_LP_MODE_8; + cmd_data[3] = ((set_data >> 56 ) & 0xff); + + return count; +} + +static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + uint8_t cmd_data[4]={0}; + unsigned long long set_data; + int err; + + err = kstrtoull(buf, 16, &set_data); + if (err){ + return err; + } + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_SETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESET_1; + cmd_data[3] = (set_data & 0xff); + cmd_data_len = sizeof(cmd_data); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESET_2; + cmd_data[3] = ((set_data >> 8 ) & 0xff); + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESET_3; + cmd_data[3] = ((set_data >> 16 ) & 0xff); + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESET_4; + cmd_data[3] = ((set_data >> 24 ) & 0xff); + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESET_5; + cmd_data[3] = ((set_data >> 32 ) & 0xff); + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESET_6; + cmd_data[3] = ((set_data >> 40 ) & 0xff); + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESET_7; + cmd_data[3] = ((set_data >> 48 ) & 0xff); + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESET_8; + cmd_data[3] = ((set_data >> 56 ) & 0xff); + + return count; +} + +static ssize_t set_response(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + uint8_t cmd_data[4]={0}; + unsigned long long set_data; + int err; + + err = kstrtoull(buf, 16, &set_data); + if (err){ + return err; + } + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_SETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESPONSE_1; + cmd_data[3] = (set_data & 0xff); + cmd_data_len = sizeof(cmd_data); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESPONSE_2; + cmd_data[3] = ((set_data >> 8 ) & 0xff); + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESPONSE_3; + cmd_data[3] = ((set_data >> 16 ) & 0xff); + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESPONSE_4; + cmd_data[3] = ((set_data >> 24 ) & 0xff); + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESPONSE_5; + cmd_data[3] = ((set_data >> 32 ) & 0xff); + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESPONSE_6; + cmd_data[3] = ((set_data >> 40 ) & 0xff); + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESPONSE_7; + cmd_data[3] = ((set_data >> 48 ) & 0xff); + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESPONSE_8; + cmd_data[3] = ((set_data >> 56 ) & 0xff); + + return count; +} + +static DEVICE_ATTR(qsfp_present, S_IRUGO, get_present, NULL); +static DEVICE_ATTR(qsfp_lpmode, S_IWUSR | S_IRUGO, get_lpmode, set_lpmode); +static DEVICE_ATTR(qsfp_reset, S_IWUSR | S_IRUGO, get_reset, set_reset); +static DEVICE_ATTR(qsfp_modsel, S_IWUSR | S_IRUGO, get_response, set_response); +static DEVICE_ATTR(qsfp_interrupt, S_IRUGO, get_interrupt, NULL); + +static struct attribute *ag9064_cpld_attrs[] = { + &dev_attr_qsfp_present.attr, + &dev_attr_qsfp_lpmode.attr, + &dev_attr_qsfp_reset.attr, + &dev_attr_qsfp_modsel.attr, + &dev_attr_qsfp_interrupt.attr, + NULL, +}; + +static struct attribute_group ag9064_cpld_attr_grp = { + .attrs = ag9064_cpld_attrs, +}; + +enum cpld_type { + system_cpld, +}; + +struct cpld_platform_data { + int reg_addr; + struct i2c_client *client; +}; + +static struct cpld_platform_data ag9064_cpld_platform_data[] = { + [system_cpld] = { + .reg_addr = CPLD_REG, + }, +}; + +static struct platform_device ag9064_cpld = { + .name = "delta-ag9064-cpld", + .id = 0, + .dev = { + .platform_data = ag9064_cpld_platform_data, + .release = device_release + }, +}; + +static int __init cpld_probe(struct platform_device *pdev) +{ + struct cpld_platform_data *pdata; + struct i2c_adapter *parent; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "CPLD platform data not found\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(BUS7); + if (!parent) { + printk(KERN_WARNING "Parent adapter (%d) not found\n",BUS7); + return -ENODEV; + } + + pdata[system_cpld].client = i2c_new_dummy(parent, pdata[system_cpld].reg_addr); + if (!pdata[system_cpld].client) { + printk(KERN_WARNING "Fail to create dummy i2c client for addr %d\n", pdata[system_cpld].reg_addr); + goto error; + } + + ret = sysfs_create_group(&pdev->dev.kobj, &ag9064_cpld_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create cpld attribute group"); + goto error; + } + + return 0; + +error: + i2c_unregister_device(pdata[system_cpld].client); + i2c_put_adapter(parent); + + return -ENODEV; +} + +static int __exit cpld_remove(struct platform_device *pdev) +{ + struct i2c_adapter *parent = NULL; + struct cpld_platform_data *pdata = pdev->dev.platform_data; + sysfs_remove_group(&pdev->dev.kobj, &ag9064_cpld_attr_grp); + + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + } + else { + if (pdata[system_cpld].client) { + if (!parent) { + parent = (pdata[system_cpld].client)->adapter; + } + i2c_unregister_device(pdata[system_cpld].client); + } + } + i2c_put_adapter(parent); + + return 0; +} + +static struct platform_driver cpld_driver = { + .probe = cpld_probe, + .remove = __exit_p(cpld_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag9064-cpld", + }, +}; + +/*---------------- CPLD - end ------------- */ + /*---------------- module initialization ------------- */ -static void __init delta_ag9064_platform_init(void) +static int __init delta_ag9064_platform_init(void) { struct i2c_client *client; struct i2c_adapter *adapter; struct swpld_mux_platform_data *swpld_pdata; + struct cpld_platform_data * cpld_pdata; int ret,i = 0; printk("ag9064_platform module initialization\n"); @@ -997,6 +1721,12 @@ static void __init delta_ag9064_platform_init(void) printk(KERN_WARNING "Fail to create IPMI user\n"); } + ret = platform_driver_register(&cpld_driver); + if (ret) { + printk(KERN_WARNING "Fail to register cpld driver\n"); + goto error_cpld_driver; + } + // register the mux prob which call the SWPLD ret = platform_driver_register(&swpld_mux_driver); if (ret) { @@ -1011,9 +1741,15 @@ static void __init delta_ag9064_platform_init(void) goto error_i2c_device_driver; } + // register the CPLD + ret = platform_device_register(&ag9064_cpld); + if (ret) { + printk(KERN_WARNING "Fail to create cpld device\n"); + goto error_ag9064_cpld; + } + swpld_pdata = ag9064_swpld_mux[0].dev.platform_data; - //swpld_pdata->cpld = cpld_pdata[system_cpld].client; - ret = platform_device_register(&ag9064_swpld_mux); + ret = platform_device_register(&ag9064_swpld_mux[0]); if (ret) { printk(KERN_WARNING "Fail to create swpld mux\n"); goto error_ag9064_swpld_mux; @@ -1044,10 +1780,14 @@ static void __init delta_ag9064_platform_init(void) for (; i >= 0; i--) { platform_device_unregister(&ag9064_swpld_mux); } + platform_driver_unregister(&ag9064_cpld); +error_ag9064_cpld: platform_driver_unregister(&i2c_device_driver); error_i2c_device_driver: platform_driver_unregister(&swpld_mux_driver); error_swpld_mux_driver: + platform_driver_unregister(&cpld_driver); +error_cpld_driver: return ret; } @@ -1060,8 +1800,10 @@ static void __exit delta_ag9064_platform_exit(void) } platform_device_unregister(&ag9064_swpld_mux); + platform_device_unregister(&ag9064_cpld); platform_driver_unregister(&i2c_device_driver); platform_driver_unregister(&swpld_mux_driver); + platform_driver_unregister(&cpld_driver); i2c_unregister_device(i2c_client_9548); } @@ -1070,4 +1812,4 @@ module_exit(delta_ag9064_platform_exit); MODULE_DESCRIPTION("DELTA ag9064 Platform Support"); MODULE_AUTHOR("Johnson Lu "); -MODULE_LICENSE("GPL"); \ No newline at end of file +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/i2c-mei_main.c b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/i2c-mei_main.c index 6a412a783c54..a5dbbd22b4a5 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/i2c-mei_main.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/i2c-mei_main.c @@ -147,9 +147,10 @@ static int mei_TxRx(u8 sensor_bus, u16 addr, u8 command, char read_write, int int i = 0; struct mei_msg * msg; - unsigned char blen; +// unsigned char blen; UINT32 timeout, dwTimeout; + UINT32 blen; HECI_DEVICE sHeciDev; recv_buf = kmalloc(sizeof(unsigned char) * (32), GFP_KERNEL); diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/control b/platform/broadcom/sonic-platform-modules-delta/debian/control index 06ac0c80a87d..bb543a5a70ae 100644 --- a/platform/broadcom/sonic-platform-modules-delta/debian/control +++ b/platform/broadcom/sonic-platform-modules-delta/debian/control @@ -12,7 +12,7 @@ Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-ag9064 Architecture: amd64 -Depends: linux-image-3.16.0-5-amd64 +Depends: linux-image-4.9.0-5-amd64 Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-ag5648 diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9064.init b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9064.init index dee41fd6f457..57665353e3c7 100755 --- a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9064.init +++ b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9064.init @@ -20,11 +20,11 @@ start) modprobe i2c-dev modprobe i2c-i801 modprobe i2c-ismt + modprobe ipmi_devintf + modprobe ipmi_si ports=0xca2 modprobe i2c-mei modprobe i2c-mux-pca954x modprobe at24 - modprobe ipmi_devintf - modprobe ipmi_si trydefaults=1 modprobe delta_ag9064_platform modprobe delta_ag9064_cpld modprobe delta_ag9064_swpld diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9064.install b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9064.install index 7776ea509487..ad7c793da3c0 100644 --- a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9064.install +++ b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag9064.install @@ -1 +1,2 @@ ag9064/cfg/ag9064-modules.conf etc/modules-load.d +systemd/platform-modules-ag9064.service lib/systemd/system diff --git a/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag9064.service b/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag9064.service new file mode 100644 index 000000000000..80f6836bfdbc --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag9064.service @@ -0,0 +1,13 @@ +[Unit] +Description=Delta ag9064 Platform modules +After=local-fs.target +Before=pmon.service + +[Service] +Type=oneshot +ExecStart=-/etc/init.d/platform-modules-ag9064 start +ExecStop=-/etc/init.d/platform-modules-ag9064 stop +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target From d50332f6f0023e1174b82f55f26d8a39d3c0e975 Mon Sep 17 00:00:00 2001 From: AndriiS Date: Mon, 2 Apr 2018 18:35:23 +0300 Subject: [PATCH 098/180] [devices]: Added new Mellanox MSN2010 platform (#24) --- .../ACS-MSN2010/port_config.ini | 23 + .../ACS-MSN2010/sai.profile | 1 + .../x86_64-mlnx_msn2010-r0/installer.conf | 1 + .../x86_64-mlnx_msn2010-r0/minigraph.xml | 855 ++++++++++++++++++ .../x86_64-mlnx_msn2010-r0/plugins/eeprom.py | 32 + .../x86_64-mlnx_msn2010-r0/plugins/psuutil.py | 73 ++ .../plugins/sfplpmget.py | 43 + .../plugins/sfplpmset.py | 107 +++ .../plugins/sfpreset.py | 45 + .../x86_64-mlnx_msn2010-r0/plugins/sfputil.py | 151 ++++ .../x86_64-mlnx_msn2010-r0/sensors.conf | 19 + platform/mellanox/mlnx-sai/Makefile | 4 +- 12 files changed, 1352 insertions(+), 2 deletions(-) create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/ACS-MSN2010/port_config.ini create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/ACS-MSN2010/sai.profile create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/installer.conf create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/minigraph.xml create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/plugins/eeprom.py create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/plugins/psuutil.py create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfplpmget.py create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfplpmset.py create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfpreset.py create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfputil.py create mode 100644 device/mellanox/x86_64-mlnx_msn2010-r0/sensors.conf diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/ACS-MSN2010/port_config.ini b/device/mellanox/x86_64-mlnx_msn2010-r0/ACS-MSN2010/port_config.ini new file mode 100644 index 000000000000..1cb2cb69c592 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/ACS-MSN2010/port_config.ini @@ -0,0 +1,23 @@ +# name lanes +Ethernet0 0 +Ethernet4 4 +Ethernet8 8 +Ethernet12 12 +Ethernet16 16 +Ethernet20 20 +Ethernet24 24 +Ethernet28 28 +Ethernet32 32 +Ethernet36 36 +Ethernet40 40 +Ethernet44 44 +Ethernet48 48 +Ethernet52 52 +Ethernet56 56 +Ethernet60 60 +Ethernet64 64 +Ethernet68 68 +Ethernet72 72,73,74,75 +Ethernet76 76,77,78,79 +Ethernet80 80,81,82,83 +Ethernet84 84,85,86,87 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/ACS-MSN2010/sai.profile b/device/mellanox/x86_64-mlnx_msn2010-r0/ACS-MSN2010/sai.profile new file mode 100644 index 000000000000..32994eb9a823 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/ACS-MSN2010/sai.profile @@ -0,0 +1 @@ +SAI_INIT_CONFIG_FILE=/usr/share/sai_2010.xml diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/installer.conf b/device/mellanox/x86_64-mlnx_msn2010-r0/installer.conf new file mode 100644 index 000000000000..c9c9493a5404 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/installer.conf @@ -0,0 +1 @@ +ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="acpi_enforce_resources=lax acpi=noirq" diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/minigraph.xml b/device/mellanox/x86_64-mlnx_msn2010-r0/minigraph.xml new file mode 100644 index 000000000000..580cdff142f2 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/minigraph.xml @@ -0,0 +1,855 @@ + + + + + + ARISTA01T0 + 10.0.0.33 + sonic + 10.0.0.32 + 1 + 180 + 60 + + + sonic + 10.0.0.0 + ARISTA01T2 + 10.0.0.1 + 1 + 180 + 60 + + + ARISTA02T0 + 10.0.0.35 + sonic + 10.0.0.34 + 1 + 180 + 60 + + + sonic + 10.0.0.2 + ARISTA02T2 + 10.0.0.3 + 1 + 180 + 60 + + + ARISTA03T0 + 10.0.0.37 + sonic + 10.0.0.36 + 1 + 180 + 60 + + + sonic + 10.0.0.4 + ARISTA03T2 + 10.0.0.5 + 1 + 180 + 60 + + + ARISTA04T0 + 10.0.0.39 + sonic + 10.0.0.38 + 1 + 180 + 60 + + + sonic + 10.0.0.6 + ARISTA04T2 + 10.0.0.7 + 1 + 180 + 60 + + + ARISTA05T0 + 10.0.0.41 + sonic + 10.0.0.40 + 1 + 180 + 60 + + + sonic + 10.0.0.8 + ARISTA05T2 + 10.0.0.9 + 1 + 180 + 60 + + + ARISTA06T0 + 10.0.0.43 + sonic + 10.0.0.42 + 1 + 180 + 60 + + + sonic + 10.0.0.10 + ARISTA06T2 + 10.0.0.11 + 1 + 180 + 60 + + + ARISTA07T0 + 10.0.0.45 + sonic + 10.0.0.44 + 1 + 180 + 60 + + + sonic + 10.0.0.12 + ARISTA07T2 + 10.0.0.13 + 1 + 180 + 60 + + + ARISTA08T0 + 10.0.0.47 + sonic + 10.0.0.46 + 1 + 180 + 60 + + + sonic + 10.0.0.14 + ARISTA08T2 + 10.0.0.15 + 1 + 180 + 60 + + + ARISTA09T0 + 10.0.0.49 + sonic + 10.0.0.48 + 1 + 180 + 60 + + + sonic + 10.0.0.16 + ARISTA09T2 + 10.0.0.17 + 1 + 180 + 60 + + + ARISTA10T0 + 10.0.0.51 + sonic + 10.0.0.50 + 1 + 180 + 60 + + + sonic + 10.0.0.18 + ARISTA10T2 + 10.0.0.19 + 1 + 180 + 60 + + + ARISTA11T0 + 10.0.0.53 + sonic + 10.0.0.52 + 1 + 180 + 60 + + + sonic + 10.0.0.20 + ARISTA11T2 + 10.0.0.21 + 1 + 180 + 60 + + + ARISTA12T0 + 10.0.0.55 + sonic + 10.0.0.54 + 1 + 180 + 60 + + + sonic + 10.0.0.22 + ARISTA12T2 + 10.0.0.23 + 1 + 180 + 60 + + + ARISTA13T0 + 10.0.0.57 + sonic + 10.0.0.56 + 1 + 180 + 60 + + + sonic + 10.0.0.24 + ARISTA13T2 + 10.0.0.25 + 1 + 180 + 60 + + + ARISTA14T0 + 10.0.0.59 + sonic + 10.0.0.58 + 1 + 180 + 60 + + + sonic + 10.0.0.26 + ARISTA14T2 + 10.0.0.27 + 1 + 180 + 60 + + + ARISTA15T0 + 10.0.0.61 + sonic + 10.0.0.60 + 1 + 180 + 60 + + + sonic + 10.0.0.28 + ARISTA15T2 + 10.0.0.29 + 1 + 180 + 60 + + + ARISTA16T0 + 10.0.0.63 + sonic + 10.0.0.62 + 1 + 180 + 60 + + + sonic + 10.0.0.30 + ARISTA16T2 + 10.0.0.31 + 1 + 180 + 60 + + + + + 65100 + sonic + + +
10.0.0.33
+ + + + +
10.0.0.1
+ + + + +
10.0.0.35
+ + + + +
10.0.0.3
+ + + + +
10.0.0.37
+ + + + +
10.0.0.5
+ + + + +
10.0.0.39
+ + + + +
10.0.0.7
+ + + + +
10.0.0.41
+ + + + +
10.0.0.9
+ + + + +
10.0.0.43
+ + + + +
10.0.0.11
+ + + + +
10.0.0.45
+ + + + +
10.0.0.13
+ + + + +
10.0.0.47
+ + + + +
10.0.0.15
+ + + + +
10.0.0.49
+ + + + +
10.0.0.17
+ + + + +
10.0.0.51
+ + + + +
10.0.0.19
+ + + + +
10.0.0.53
+ + + + +
10.0.0.21
+ + + + +
10.0.0.55
+ + + + +
10.0.0.23
+ + + + +
10.0.0.57
+ + + + +
10.0.0.25
+ + + + +
10.0.0.59
+ + + + +
10.0.0.27
+ + + + +
10.0.0.61
+ + + + +
10.0.0.29
+ + + + +
10.0.0.63
+ + + + +
10.0.0.31
+ + + + + + + + 64001 + ARISTA01T0 + + + + 65200 + ARISTA01T2 + + + + 64002 + ARISTA02T0 + + + + 65200 + ARISTA02T2 + + + + 64003 + ARISTA03T0 + + + + 65200 + ARISTA03T2 + + + + 64004 + ARISTA04T0 + + + + 65200 + ARISTA04T2 + + + + 64005 + ARISTA05T0 + + + + 65200 + ARISTA05T2 + + + + 64006 + ARISTA06T0 + + + + + + + + + + HostIP + Loopback0 + + 10.1.0.32/32 + + 10.1.0.32/32 + + + + + + + + sonic + + + + + + Ethernet0 + 10.0.0.0/31 + + + + Ethernet4 + 10.0.0.2/31 + + + + Ethernet8 + 10.0.0.4/31 + + + + Ethernet12 + 10.0.0.6/31 + + + + Ethernet16 + 10.0.0.8/31 + + + + Ethernet20 + 10.0.0.10/31 + + + + Ethernet24 + 10.0.0.12/31 + + + + Ethernet28 + 10.0.0.14/31 + + + + Ethernet32 + 10.0.0.16/31 + + + + Ethernet36 + 10.0.0.18/31 + + + + Ethernet40 + 10.0.0.20/31 + + + + Ethernet44 + 10.0.0.22/31 + + + + Ethernet48 + 10.0.0.24/31 + + + + Ethernet52 + 10.0.0.26/31 + + + + Ethernet56 + 10.0.0.28/31 + + + + Ethernet60 + 10.0.0.30/31 + + + + Ethernet64 + 10.0.0.32/31 + + + + Ethernet68 + 10.0.0.34/31 + + + + Ethernet72 + 10.0.0.36/31 + + + + Ethernet76 + 10.0.0.38/31 + + + + Ethernet80 + 10.0.0.40/31 + + + + Ethernet84 + 10.0.0.42/31 + + + + + + + + + + + + DeviceInterfaceLink + sonic + Ethernet0 + ARISTA01T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet4 + ARISTA02T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet8 + ARISTA03T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet12 + ARISTA04T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet16 + ARISTA05T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet20 + ARISTA06T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet24 + ARISTA07T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet28 + ARISTA08T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet32 + ARISTA09T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet36 + ARISTA10T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet40 + ARISTA11T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet44 + ARISTA12T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet48 + ARISTA13T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet52 + ARISTA14T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet56 + ARISTA15T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet60 + ARISTA16T2 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet64 + ARISTA01T0 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet68 + ARISTA02T0 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet72 + ARISTA03T0 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet76 + ARISTA04T0 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet80 + ARISTA05T0 + Ethernet1 + + + DeviceInterfaceLink + sonic + Ethernet84 + ARISTA06T0 + Ethernet1 + + + + + sonic + ACS-MSN2010 + + + + + + + sonic + + + DhcpResources + + + + + NtpResources + + 0.debian.pool.ntp.org;1.debian.pool.ntp.org;2.debian.pool.ntp.org;3.debian.pool.ntp.org + + + SyslogResources + + + + + ErspanDestinationIpv4 + + 2.2.2.2 + + + + + + + sonic + ACS-MSN2010 + + diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/eeprom.py b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/eeprom.py new file mode 100644 index 000000000000..61e37b51db71 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/eeprom.py @@ -0,0 +1,32 @@ +#!/usr/bin/env python + +############################################################################# +# Mellanox +# +# Platform and model specific eeprom subclass, inherits from the base class, +# and provides the followings: +# - the eeprom format definition +# - specific encoder/decoder if there is special need +############################################################################# + +try: + import exceptions + import binascii + import time + import optparse + import warnings + import os + import sys + from sonic_eeprom import eeprom_base + from sonic_eeprom import eeprom_tlvinfo + import subprocess +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + +class board(eeprom_tlvinfo.TlvInfoDecoder): + + _TLV_INFO_MAX_LEN = 256 + + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/bsp/eeprom/vpd_info" + super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/psuutil.py b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/psuutil.py new file mode 100644 index 000000000000..b1900d173f57 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/psuutil.py @@ -0,0 +1,73 @@ +#!/usr/bin/env python + +############################################################################# +# Mellanox +# +# Module contains an implementation of SONiC PSU Base API and +# provides the PSUs status which are available in the platform +# +############################################################################# + +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError (str(e) + "- required module not found") + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + def __init__(self): + PsuBase.__init__(self) + + self.psu_path = "/bsp/module/" + self.psu_presence = "psu{}_pwr_status" + self.psu_oper_status = "psu{}_pwr_status" + + def get_num_psus(self): + """ + Retrieves the number of PSUs available on the device + + :return: An integer, the number of PSUs available on the device + """ + return 2 + + def get_psu_status(self, index): + """ + Retrieves the oprational status of power supply unit (PSU) defined + by 1-based index + + :param index: An integer, 1-based index of the PSU of which to query status + :return: Boolean, True if PSU is operating properly, False if PSU is faulty + """ + if index is None: + return False + + status = 0 + try: + with open(self.psu_path + self.psu_oper_status.format(index), 'r') as power_status: + status = int(power_status.read()) + except IOError: + return False + + return status == 1 + + def get_psu_presence(self, index): + """ + Retrieves the presence status of power supply unit (PSU) defined + by 1-based index + + :param index: An integer, 1-based index of the PSU of which to query status + :return: Boolean, True if PSU is plugged, False if not + """ + if index is None: + return False + + try: + with open(self.psu_path + self.psu_presence.format(index), 'r') as presence_status: + return True + except IOError: + return False + + return False diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfplpmget.py b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfplpmget.py new file mode 100644 index 000000000000..170766e9bce4 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfplpmget.py @@ -0,0 +1,43 @@ +#!/usr/bin/env python + +import sys, errno +import os +from python_sdk_api.sxd_api import * +from python_sdk_api.sx_api import * + +# Check if SFP port number is provided +if len(sys.argv) < 2: + print "SFP module number is missed." + print "Usage: sfplpmget.py " + sys.exit(errno.EINVAL) + +# Init SDK API +rc, handle = sx_api_open(None) +if (rc != SX_STATUS_SUCCESS): + print "Failed to open api handle.\nPlease check that SDK is running." + sys.exit(errno.EACCES) + +pid = os.getpid() +rc = sxd_access_reg_init(pid, None, 0) +if (rc != 0): + print "Failed to initializing register access.\nPlease check that SDK is running." + sys.exit(errno.EACCES) + +# Get SFP module number +sfp_module = int(sys.argv[1]) + +# Get MCION +mcion = ku_mcion_reg() +mcion.module = sfp_module +meta = sxd_reg_meta_t() +meta.dev_id = 1 +meta.swid = 0 +meta.access_cmd = SXD_ACCESS_CMD_GET + +rc = sxd_access_reg_mcion(mcion, meta, 1, None, None) +assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_mcion failed, rc = %d" % rc + +# Get low power mode status +lpm_mask = 1 << 8 +lpm_status = (lpm_mask & mcion.module_status_bits) != 0 +print "LPM ON" if lpm_status else "LPM OFF" diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfplpmset.py b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfplpmset.py new file mode 100644 index 000000000000..3f31af9f2944 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfplpmset.py @@ -0,0 +1,107 @@ +#!/usr/bin/env python + +import sys, errno +import time +import os +from python_sdk_api.sxd_api import * +from python_sdk_api.sx_api import * + +def get_log_ports(handle, sfp_module): + port_attributes_list = new_sx_port_attributes_t_arr(64) + port_cnt_p = new_uint32_t_p() + uint32_t_p_assign(port_cnt_p, 64) + + rc = sx_api_port_device_get(handle, 1 , 0, port_attributes_list, port_cnt_p) + assert rc == SX_STATUS_SUCCESS, "sx_api_port_device_get failed, rc = %d" % rc + + port_cnt = uint32_t_p_value(port_cnt_p) + log_port_list = [] + for i in range(0, port_cnt): + port_attributes = sx_port_attributes_t_arr_getitem(port_attributes_list, i) + if port_attributes.port_mapping.module_port == sfp_module: + log_port_list.append(port_attributes.log_port) + + return log_port_list + +def set_sfp_admin_status(handle, meta, sfp_module, sfp_log_port_list, admin_status): + # Get PMAOS + pmaos = ku_pmaos_reg() + pmaos.module = sfp_module + meta.access_cmd = SXD_ACCESS_CMD_GET + rc = sxd_access_reg_pmaos(pmaos, meta, 1, None, None) + assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmaos failed, rc = %d" % rc + + # Set admin status to PMAOS + pmaos.ase = 1 + pmaos.ee = 1 + pmaos.e = 2 + pmaos.rst = 0 + if admin_status == SX_PORT_ADMIN_STATUS_DOWN: + pmaos.admin_status = 2 + else: + pmaos.admin_status = 1 + + meta.access_cmd = SXD_ACCESS_CMD_SET + rc = sxd_access_reg_pmaos(pmaos, meta, 1, None, None) + assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmaos failed, rc = %d" % rc + +# Check if SFP port number is provided +if len(sys.argv) < 3: + print "SFP module number or LPM is missed." + print "Usage: sfplpmset.py " + sys.exit(errno.EINVAL) + +lpm_enable = None +if sys.argv[2] == 'on': + lpm_enable = True +elif sys.argv[2] == 'off': + lpm_enable = False +else: + print "Unrecognized LPM parameter. Please use or values" + sys.exit(errno.EINVAL) + +# Init SDK API +rc, handle = sx_api_open(None) +if (rc != SX_STATUS_SUCCESS): + print "Failed to open api handle.\nPlease check that SDK is running." + sys.exit(errno.EACCES) + +pid = os.getpid() +rc = sxd_access_reg_init(pid, None, 0) +if (rc != 0): + print "Failed to initializing register access.\nPlease check that SDK is running." + sys.exit(errno.EACCES); + +# Get SFP module and log ports number and LPM status +sfp_module = int(sys.argv[1]) +log_port_list = get_log_ports(handle, sfp_module) +if not log_port_list: + print "Failed to get log ports" + sys.exit(errno.EACCES) + +# Get PMMP +pmmp = ku_pmmp_reg() +pmmp.module = sfp_module +meta = sxd_reg_meta_t() +meta.dev_id = 1 +meta.swid = 0 +meta.access_cmd = SXD_ACCESS_CMD_GET +rc = sxd_access_reg_pmmp(pmmp, meta, 1, None, None) +assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmmp failed, rc = %d" % rc + +# Disable admin status before LPM settings +set_sfp_admin_status(handle, meta, sfp_module, log_port_list, SX_PORT_ADMIN_STATUS_DOWN) + +# Set low power mode status +lpm_mask = 1 << 8 +if lpm_enable: + pmmp.eeprom_override = pmmp.eeprom_override | lpm_mask +else: + pmmp.eeprom_override = pmmp.eeprom_override & (~lpm_mask) + +meta.access_cmd = SXD_ACCESS_CMD_SET +rc = sxd_access_reg_pmmp(pmmp, meta, 1, None, None) +assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmmp failed, rc = %d" % rc + +# Enable admin status after LPM settings +set_sfp_admin_status(handle, meta, sfp_module, log_port_list, SX_PORT_ADMIN_STATUS_UP) diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfpreset.py b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfpreset.py new file mode 100644 index 000000000000..69fa2be614c2 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfpreset.py @@ -0,0 +1,45 @@ +#!/usr/bin/env python + +import sys, errno +import os +from python_sdk_api.sxd_api import * +from python_sdk_api.sx_api import * + +# Check if SFP port number is provided +if len(sys.argv) < 2: + print "SFP module number or LPM is missed." + print "Usage: sfpreset.py " + sys.exit(errno.EINVAL) + +# Init SDK API +rc, handle = sx_api_open(None) +if (rc != SX_STATUS_SUCCESS): + print "Failed to open api handle.\nPlease check that SDK is running." + sys.exit(errno.EACCES) + +pid = os.getpid() +rc = sxd_access_reg_init(pid, None, 0) +if (rc != 0): + print "Failed to initializing register access.\nPlease check that SDK is running." + sys.exit(errno.EACCES) + +# Get SFP module number +sfp_module = int(sys.argv[1]) + +# Get PMAOS +pmaos = ku_pmaos_reg() +pmaos.module = sfp_module +meta = sxd_reg_meta_t() +meta.dev_id = 1 +meta.swid = 0 +meta.access_cmd = SXD_ACCESS_CMD_GET + +rc = sxd_access_reg_pmaos(pmaos, meta, 1, None, None) +assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmaos failed, rc = %d" % rc + +# Reset SFP +pmaos.rst = 1 +meta.access_cmd = SXD_ACCESS_CMD_SET +rc = sxd_access_reg_pmaos(pmaos, meta, 1, None, None) +assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmaos failed, rc = %d" % rc +print "Reset flag is set" diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfputil.py new file mode 100644 index 000000000000..d15c11943280 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/plugins/sfputil.py @@ -0,0 +1,151 @@ +# sfputil.py +# +# Platform-specific SFP transceiver interface for SONiC +# + +try: + import time + import subprocess + from sonic_sfp.sfputilbase import SfpUtilBase +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + + PORT_START = 0 + PORT_END = 55 + PORTS_IN_BLOCK = 56 + + EEPROM_OFFSET = 1 + + _port_to_eeprom_mapping = {} + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_ports(self): + return range(0, self.PORTS_IN_BLOCK + 1) + + @property + def port_to_eeprom_mapping(self): + return self._port_to_eeprom_mapping + + def __init__(self): + eeprom_path = "/bsp/qsfp/qsfp{0}" + + for x in range(0, self.port_end + 1): + self._port_to_eeprom_mapping[x] = eeprom_path.format(x + self.EEPROM_OFFSET) + + SfpUtilBase.__init__(self) + + def get_presence(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + try: + reg_file = open("/bsp/qsfp/qsfp%d_status" % (port_num+1)) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = reg_file.readline().rstrip() + + # content is a string with the qsfp status + if content == "1": + return True + + return False + + def get_low_power_mode(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + lpm_cmd = "docker exec syncd python /usr/share/sonic/platform/plugins/sfplpmget.py {}".format(port_num) + + try: + output = subprocess.check_output(lpm_cmd, shell=True) + if 'LPM ON' in output: + return True + except subprocess.CalledProcessError as e: + print "Error! Unable to get LPM for {}, rc = {}, err msg: {}".format(port_num, e.returncode, e.output) + return False + + return False + + def set_low_power_mode(self, port_num, lpmode): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + curr_lpmode = self.get_low_power_mode(port_num) + if curr_lpmode == lpmode: + return True + + lpm = 'on' if lpmode else 'off' + lpm_cmd = "docker exec syncd python /usr/share/sonic/platform/plugins/sfplpmset.py {} {}".format(port_num, lpm) + sfp_port_names = self.physical_to_logical[port_num] + + # Get port admin status + try: + enabled_ports = subprocess.check_output("ip link show up", shell=True) + except subprocess.CalledProcessError as e: + print "Error! Unable to get ports status, err msg: {}".format(e.output) + return False + + port_to_disable = [] + for port in sfp_port_names: + if port in enabled_ports: + port_to_disable.append(port) + + # Disable ports before LPM settings + for port in port_to_disable: + try: + subprocess.check_output("ifconfig {} down".format(port), shell=True) + except subprocess.CalledProcessError as e: + print "Error! Unable to set admin status to DOWN for {}, rc = {}, err msg: {}".format(port, e.returncode, e.output) + return False + + time.sleep(3) + + # Set LPM + try: + subprocess.check_output(lpm_cmd, shell=True) + except subprocess.CalledProcessError as e: + print "Error! Unable to set LPM for {}, rc = {}, err msg: {}".format(port_num, e.returncode, e.output) + return False + + # Enable ports after LPM settings + for port in port_to_disable: + try: + subprocess.check_output("ifconfig {} up".format(port), shell=True) + except subprocess.CalledProcessError as e: + print "Error! Unable to set admin status to UP for {}, rc = {}, err msg: {}".format(port, e.returncode, e.output) + return False + + return True + + def reset(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + lpm_cmd = "docker exec syncd python /usr/share/sonic/platform/plugins/sfpreset.py {}".format(port_num) + + try: + subprocess.check_output(lpm_cmd, shell=True) + return True + except subprocess.CalledProcessError as e: + print "Error! Unable to set LPM for {}, rc = {}, err msg: {}".format(port_num, e.returncode, e.output) + return False + + return False diff --git a/device/mellanox/x86_64-mlnx_msn2010-r0/sensors.conf b/device/mellanox/x86_64-mlnx_msn2010-r0/sensors.conf new file mode 100644 index 000000000000..170b0371fb0d --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2010-r0/sensors.conf @@ -0,0 +1,19 @@ +bus "i2c-2" "i2c-1-mux (chan_id 1)" +chip "mlxsw-i2c-2-48" + label temp1 "ASIC Temp" + +bus "i2c-7" "i2c-1-mux (chan_id 6)" +chip "lm75-*" + label temp1 "Ambient Port Temp" + +bus "i2c-5" "i2c-1-mux (chan_id 4)" +chip "tps53679-*" + label vin "TPS vin" + label vout1 "TPS vout1" + label vout2 "TPS vout2" + label temp1 "TPS Temp1" + label temp2 "TPS Temp2" + label pout1 "TPS pouti1" + label pout2 "TPS pout2" + label iout1 "TPS iout1" + label iout2 "TPS iout2" diff --git a/platform/mellanox/mlnx-sai/Makefile b/platform/mellanox/mlnx-sai/Makefile index 9a8005e5461f..a858bf098df2 100644 --- a/platform/mellanox/mlnx-sai/Makefile +++ b/platform/mellanox/mlnx-sai/Makefile @@ -6,8 +6,8 @@ MAIN_TARGET = mlnx-sai_1.mlnx.$(MLNX_SAI_VERSION)_amd64.deb $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # get sources - rm -rf SAI-Implementation - git clone https://github.com/Mellanox/SAI-Implementation.git + #rm -rf SAI-Implementation + #git clone https://github.com/Mellanox/SAI-Implementation.git # build pushd SAI-Implementation From 244aaca1973eeb0bfc5b0d2fcf9c8a0631518ec1 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Fri, 6 Apr 2018 14:58:18 +0000 Subject: [PATCH 099/180] [devices]: disable compiling ag9064 and ag5648 Signed-off-by: Guohan Lu --- platform/broadcom/sonic-platform-modules-delta/debian/rules | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/rules b/platform/broadcom/sonic-platform-modules-delta/debian/rules index d0398ecaca17..58a3597e7a44 100755 --- a/platform/broadcom/sonic-platform-modules-delta/debian/rules +++ b/platform/broadcom/sonic-platform-modules-delta/debian/rules @@ -5,7 +5,7 @@ export INSTALL_MOD_DIR:=extra KVERSION ?= $(shell uname -r) KERNEL_SRC := /lib/modules/$(KVERSION) MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= ag9032v1 ag9064 ag5648 +MODULE_DIRS:= ag9032v1 %: dh $@ --with=systemd From b53fa5ee67cdbde326c92f74bf671e68d779ad52 Mon Sep 17 00:00:00 2001 From: StanleyCi <34563271+StanleyCi@users.noreply.github.com> Date: Sat, 14 Apr 2018 13:48:36 +0800 Subject: [PATCH 100/180] [devices]: Modified and fixed delta ag5648 modules. (#30) * Modified and fixed delta ag5648 modules 1. modified and fixed delta ag5648 modules. 2. enable build ag5648. Signed-off-by: neal tai * Enable build ag9064 Signed-off-by: neal tai --- .../ag5648/modules/delta_ag5648_platform.c | 3186 +++++++++-------- .../sonic-platform-modules-delta/debian/rules | 2 +- 2 files changed, 1645 insertions(+), 1543 deletions(-) diff --git a/platform/broadcom/sonic-platform-modules-delta/ag5648/modules/delta_ag5648_platform.c b/platform/broadcom/sonic-platform-modules-delta/ag5648/modules/delta_ag5648_platform.c index 814889464596..16b9ba2fbc4c 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag5648/modules/delta_ag5648_platform.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag5648/modules/delta_ag5648_platform.c @@ -1,1542 +1,1644 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define BUS4_DEV_NUM 54 -#define DEFAULT_NUM 1 -#define BUS4_BASE_NUM 10 -#define BUS4_MUX_REG 0x18 - -#define TEMP_FAN_VAL 0x06 -#define FANIO_CTL_VAL 0x07 -#define FAN_CTRL_VAL 0x05 -#define PSU1_VAL 0x00 -#define PSU2_VAL 0x20 -#define HOT_SWAP1_VAL 0x10 -#define HOT_SWAP2_VAL 0x30 - -#define SYSTEM_CPLD_REG 0x31 -#define MASTER_CPLD_REG 0x35 -#define SLAVE_CPLD_REG 0x39 - -#define FAN_LED_REG 0x05 -#define LED_REG 0x04 - -#define SFP_PRESENCE_1 0x08 -#define SFP_PRESENCE_2 0x09 -#define SFP_PRESENCE_3 0x0a -#define SFP_PRESENCE_4 0x0b -#define SFP_PRESENCE_5 0x0c -#define SFP_PRESENCE_6 0x08 -#define SFP_PRESENCE_7 0x09 -#define QSFP_PRESENCE 0x12 - -#define QSFP_RESPONSE 0x10 -#define QSFP_LP_MODE 0x11 -#define QSFP_RESET 0x13 - - -#define SFF8436_INFO(data) \ - .type = "sff8436", .addr = 0x50, .platform_data = (data) - -#define SFF_8346_PORT(eedata) \ - .byte_len = 256, .page_size = 1, .flags = SFF_8436_FLAG_READONLY - -#define ag5648_i2c_device_num(NUM){ \ - .name = "delta-ag5648-i2c-device", \ - .id = NUM, \ - .dev = { \ - .platform_data = &ag5648_i2c_device_platform_data[NUM], \ - .release = device_release, \ - }, \ -} - -/*Define struct to get client of i2c_new_deivce */ -struct i2c_client * i2c_client_9548; - -enum{ - BUS0 = 0, - BUS1, - BUS2, - BUS3, - BUS4, - BUS5, - BUS6, - BUS7, -}; - -unsigned char reverse_8bits(unsigned char c) -{ - unsigned char s = 0; - int i; - for (i = 0; i < 8; ++i) { - s <<= 1; - s |= c & 1; - c >>= 1; - } - return s; -} -/*---------------- I2C device - start ------------- */ -static void device_release(struct device *dev) -{ - return; -} - -struct i2c_device_platform_data { - int parent; - struct i2c_board_info info; - struct i2c_client *client; -}; -/* pca9547 - add 8 bus */ -static struct pca954x_platform_mode pca954x_mode[] = { - { .adap_id = 2, - .deselect_on_exit = 1, - }, - { .adap_id = 3, - .deselect_on_exit = 1, - }, - { .adap_id = 4, - .deselect_on_exit = 1, - }, - { .adap_id = 5, - .deselect_on_exit = 1, - }, - { .adap_id = 6, - .deselect_on_exit = 1, - }, - { .adap_id = 7, - .deselect_on_exit = 1, - }, - { .adap_id = 8, - .deselect_on_exit = 1, - }, - { .adap_id = 9, - .deselect_on_exit = 1, - }, -}; - -static struct pca954x_platform_data pca954x_data = { - .modes = pca954x_mode, - .num_modes = ARRAY_SIZE(pca954x_mode), -}; - -static struct i2c_board_info __initdata i2c_info_pca9548[] = -{ - { - I2C_BOARD_INFO("pca9548", 0x70), - .platform_data = &pca954x_data, - }, -}; - - -static struct sff_8436_platform_data sff_8436_port[] = { - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, -}; - - -static struct i2c_device_platform_data ag5648_i2c_device_platform_data[] = { - { - /* id eeprom (0x53) */ - .parent = 2, - .info = { I2C_BOARD_INFO("24c02", 0x53) }, - .client = NULL, - }, - { - /* tmp75 (0x4d) */ - .parent = 2, - .info = { I2C_BOARD_INFO("tmp75", 0x4d) }, - .client = NULL, - }, - { - /* tmp75 (0x4d) */ - .parent = 3, - .info = { I2C_BOARD_INFO("tmp75", 0x49) }, - .client = NULL, - }, - { - /* tmp75 (0x4d) */ - .parent = 3, - .info = { I2C_BOARD_INFO("tmp75", 0x4b) }, - }, - { - /* tmp75 (0x4d) */ - .parent = 3, - .info = { I2C_BOARD_INFO("tmp75", 0x4c) }, - .client = NULL, - }, - { - /* tmp75 (0x4d) */ - .parent = 3, - .info = { I2C_BOARD_INFO("tmp75", 0x4e) }, - .client = NULL, - }, - { - /* tmp75 (0x4d) */ - .parent = 3, - .info = { I2C_BOARD_INFO("tmp75", 0x4f) }, - }, - { - /* tmp75 (0x4d) */ - .parent = 3, - .info = { I2C_BOARD_INFO("emc2305", 0x4d) }, - .client = NULL, - }, - { - /* tmp75 (0x4d) */ - .parent = 5, - .info = { I2C_BOARD_INFO("emc2305", 0x4d) }, - .client = NULL, - }, - { - /* tmp75 (0x4d) */ - .parent = 3, - .info = { I2C_BOARD_INFO("ltc4215", 0x40) }, - .client = NULL, - }, - { - /* tmp75 (0x4d) */ - .parent = 3, - .info = { I2C_BOARD_INFO("ltc4215", 0x42) }, - }, - { - /* psu1 (0x59) */ - .parent = 6, - .info = { I2C_BOARD_INFO("dni_ag5648_psu", 0x59) }, - .client = NULL, - }, - { - /* psu2 (0x58) */ - .parent = 6, - .info = { I2C_BOARD_INFO("dni_ag5648_psu", 0x58) }, - }, - { - /* qsfp 1 (0x50) */ - .parent = 10, - .info = { SFF8436_INFO(&sff_8436_port[0]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 11, - .info = { SFF8436_INFO(&sff_8436_port[1]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 12, - .info = { SFF8436_INFO(&sff_8436_port[2]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 13, - .info = { SFF8436_INFO(&sff_8436_port[3]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 14, - .info = { SFF8436_INFO(&sff_8436_port[4]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 15, - .info = { SFF8436_INFO(&sff_8436_port[5]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 16, - .info = { SFF8436_INFO(&sff_8436_port[6]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 17, - .info = { SFF8436_INFO(&sff_8436_port[7]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 18, - .info = { SFF8436_INFO(&sff_8436_port[8]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 19, - .info = { SFF8436_INFO(&sff_8436_port[9]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 20, - .info = { SFF8436_INFO(&sff_8436_port[10]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 21, - .info = { SFF8436_INFO(&sff_8436_port[11]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 22, - .info = { SFF8436_INFO(&sff_8436_port[12]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 23, - .info = { SFF8436_INFO(&sff_8436_port[13]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 24, - .info = { SFF8436_INFO(&sff_8436_port[14]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 25, - .info = { SFF8436_INFO(&sff_8436_port[15]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 26, - .info = { SFF8436_INFO(&sff_8436_port[16]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 27, - .info = { SFF8436_INFO(&sff_8436_port[17]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 28, - .info = { SFF8436_INFO(&sff_8436_port[18]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 29, - .info = { SFF8436_INFO(&sff_8436_port[19]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 30, - .info = { SFF8436_INFO(&sff_8436_port[20]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 31, - .info = { SFF8436_INFO(&sff_8436_port[21]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 32, - .info = { SFF8436_INFO(&sff_8436_port[22]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 33, - .info = { SFF8436_INFO(&sff_8436_port[23]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 34, - .info = { SFF8436_INFO(&sff_8436_port[24]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 35, - .info = { SFF8436_INFO(&sff_8436_port[25]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 36, - .info = { SFF8436_INFO(&sff_8436_port[26]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 37, - .info = { SFF8436_INFO(&sff_8436_port[27]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 38, - .info = { SFF8436_INFO(&sff_8436_port[28]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 39, - .info = { SFF8436_INFO(&sff_8436_port[29]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 40, - .info = { SFF8436_INFO(&sff_8436_port[30]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 41, - .info = { SFF8436_INFO(&sff_8436_port[31]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 42, - .info = { SFF8436_INFO(&sff_8436_port[32]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 43, - .info = { SFF8436_INFO(&sff_8436_port[33]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 44, - .info = { SFF8436_INFO(&sff_8436_port[34]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 45, - .info = { SFF8436_INFO(&sff_8436_port[35]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 46, - .info = { SFF8436_INFO(&sff_8436_port[36]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 47, - .info = { SFF8436_INFO(&sff_8436_port[37]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 48, - .info = { SFF8436_INFO(&sff_8436_port[38]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 49, - .info = { SFF8436_INFO(&sff_8436_port[39]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 50, - .info = { SFF8436_INFO(&sff_8436_port[40]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 51, - .info = { SFF8436_INFO(&sff_8436_port[41]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 52, - .info = { SFF8436_INFO(&sff_8436_port[42]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 53, - .info = { SFF8436_INFO(&sff_8436_port[43]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 54, - .info = { SFF8436_INFO(&sff_8436_port[44]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 55, - .info = { SFF8436_INFO(&sff_8436_port[45]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 56, - .info = { SFF8436_INFO(&sff_8436_port[46]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 57, - .info = { SFF8436_INFO(&sff_8436_port[47]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 58, - .info = { SFF8436_INFO(&sff_8436_port[48]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 59, - .info = { SFF8436_INFO(&sff_8436_port[49]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 60, - .info = { SFF8436_INFO(&sff_8436_port[50]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 61, - .info = { SFF8436_INFO(&sff_8436_port[51]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 62, - .info = { SFF8436_INFO(&sff_8436_port[52]) }, - .client = NULL, - }, - { - /* qsfp 1 (0x50) */ - .parent = 63, - .info = { SFF8436_INFO(&sff_8436_port[53]) }, - .client = NULL, - }, -}; - - -static struct platform_device ag5648_i2c_device[] = { - ag5648_i2c_device_num(0), - ag5648_i2c_device_num(1), - ag5648_i2c_device_num(2), - ag5648_i2c_device_num(3), - ag5648_i2c_device_num(4), - ag5648_i2c_device_num(5), - ag5648_i2c_device_num(6), - ag5648_i2c_device_num(7), - ag5648_i2c_device_num(8), - ag5648_i2c_device_num(9), - ag5648_i2c_device_num(10), - ag5648_i2c_device_num(11), - ag5648_i2c_device_num(12), - ag5648_i2c_device_num(13), - ag5648_i2c_device_num(14), - ag5648_i2c_device_num(15), - ag5648_i2c_device_num(16), - ag5648_i2c_device_num(17), - ag5648_i2c_device_num(18), - ag5648_i2c_device_num(19), - ag5648_i2c_device_num(20), - ag5648_i2c_device_num(21), - ag5648_i2c_device_num(22), - ag5648_i2c_device_num(23), - ag5648_i2c_device_num(24), - ag5648_i2c_device_num(25), - ag5648_i2c_device_num(26), - ag5648_i2c_device_num(27), - ag5648_i2c_device_num(28), - ag5648_i2c_device_num(29), - ag5648_i2c_device_num(30), - ag5648_i2c_device_num(31), - ag5648_i2c_device_num(32), - ag5648_i2c_device_num(33), - ag5648_i2c_device_num(34), - ag5648_i2c_device_num(35), - ag5648_i2c_device_num(36), - ag5648_i2c_device_num(37), - ag5648_i2c_device_num(38), - ag5648_i2c_device_num(39), - ag5648_i2c_device_num(40), - ag5648_i2c_device_num(41), - ag5648_i2c_device_num(42), - ag5648_i2c_device_num(43), - ag5648_i2c_device_num(44), - ag5648_i2c_device_num(45), - ag5648_i2c_device_num(46), - ag5648_i2c_device_num(47), - ag5648_i2c_device_num(48), - ag5648_i2c_device_num(49), - ag5648_i2c_device_num(50), - ag5648_i2c_device_num(51), - ag5648_i2c_device_num(52), - ag5648_i2c_device_num(53), - ag5648_i2c_device_num(54), - ag5648_i2c_device_num(55), - ag5648_i2c_device_num(56), - ag5648_i2c_device_num(57), - ag5648_i2c_device_num(58), - ag5648_i2c_device_num(59), - ag5648_i2c_device_num(60), - ag5648_i2c_device_num(61), - ag5648_i2c_device_num(62), - ag5648_i2c_device_num(63), - ag5648_i2c_device_num(64), - ag5648_i2c_device_num(65), - ag5648_i2c_device_num(66), -}; - -/*---------------- I2C device - end ------------- */ - -/*---------------- I2C driver - start ------------- */ -static int __init i2c_device_probe(struct platform_device *pdev) -{ - struct i2c_device_platform_data *pdata; - struct i2c_adapter *parent; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "Missing platform data\n"); - return -ENODEV; - } - - parent = i2c_get_adapter(pdata->parent); - if (!parent) { - dev_err(&pdev->dev, "Parent adapter (%d) not found\n", - pdata->parent); - return -ENODEV; - } - - pdata->client = i2c_new_device(parent, &pdata->info); - if (!pdata->client) { - dev_err(&pdev->dev, "Failed to create i2c client %s at %d\n", - pdata->info.type, pdata->parent); - return -ENODEV; - } - - return 0; -} - -static int __exit i2c_deivce_remove(struct platform_device *pdev) -{ - struct i2c_adapter *parent; - struct i2c_device_platform_data *pdata; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "Missing platform data\n"); - return -ENODEV; - } - - if (pdata->client) { - parent = i2c_get_adapter(pdata->parent); - i2c_unregister_device(pdata->client); - i2c_put_adapter(parent); - } - - return 0; -} -static struct platform_driver i2c_device_driver = { - .probe = i2c_device_probe, - .remove = __exit_p(i2c_deivce_remove), - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag5648-i2c-device", - } -}; - -/*---------------- I2C driver - end ------------- */ - -/*---------------- CPLD - start ------------- */ - -/* CPLD -- device */ - -enum cpld_type { - system_cpld, - master_cpld, - slave_cpld, -}; - -struct cpld_platform_data { - int reg_addr; - struct i2c_client *client; -}; - -static struct cpld_platform_data ag5648_cpld_platform_data[] = { - [system_cpld] = { - .reg_addr = SYSTEM_CPLD_REG, - }, - [master_cpld] = { - .reg_addr = MASTER_CPLD_REG, - }, - [slave_cpld] = { - .reg_addr = SLAVE_CPLD_REG, - }, -}; - -static struct platform_device ag5648_cpld = { - .name = "delta-ag5648-cpld", - .id = 0, - .dev = { - .platform_data = ag5648_cpld_platform_data, - .release = device_release - }, -}; - -static ssize_t get_present(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - int ret; - u64 data = 0; - u64 data2 = 0; - struct cpld_platform_data *pdata = dev->platform_data; - - ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_1); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data = (u32)(ret & 0xff); - - ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_2); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data |= (u32)(ret & 0xff) << 8; - - ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_3); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data |= (u32)(ret & 0xff) << 16; - - ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_4); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data |= (u32)(ret & 0xff) << 24; - - ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_5); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data2 = ((u32)(ret & 0xf)) ; - - ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, SFP_PRESENCE_6); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data2 |= (u32)(ret & 0xff) << 4; - - ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, SFP_PRESENCE_7); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data2 |= (u32)((ret >> 4) & 0xf) << 12; - - ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, QSFP_PRESENCE); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data2 |= (u32)(ret & 0x3f) << 16; - - return sprintf(buf, "0x%06x%x\n", data2, data); -} - -static ssize_t get_lpmode(struct device *dev, struct device_attribute *devattr, char *buf) -{ - int ret; - u32 data = 0; - struct cpld_platform_data *pdata = dev->platform_data; - - ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, QSFP_LP_MODE); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data = ((u8)ret & 0x3f) ; - - return sprintf(buf, "0x%02x%012x\n", data); -} - -static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - unsigned long data; - int err; - - struct cpld_platform_data *pdata = dev->platform_data; - - err = kstrtoul(buf, 16, &data); - if (err) - return err; - - data = data >> 48; - i2c_smbus_write_byte_data(pdata[master_cpld].client, QSFP_LP_MODE, (u8)(data & 0xff)); - - return count; -} - -static ssize_t get_reset(struct device *dev, struct device_attribute *devattr, char *buf) -{ - int ret; - u64 data = 0; - struct cpld_platform_data *pdata = dev->platform_data; - - ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, QSFP_RESET); - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - - data = ((u8)ret & 0x3f); - - return sprintf(buf, "0x%02x%012x\n", data); -} - -static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - unsigned long data; - int err; - struct cpld_platform_data *pdata = dev->platform_data; - - err = kstrtoul(buf, 16, &data); - if (err) - return err; - data = data >> 48; - i2c_smbus_write_byte_data(pdata[master_cpld].client, QSFP_RESET, (u8)(data & 0xff)); - - return count; -} - -static ssize_t get_response(struct device *dev, struct device_attribute *devattr, char *buf) -{ - int ret; - u8 data = 0; - struct cpld_platform_data *pdata = dev->platform_data; - - ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, QSFP_RESPONSE); - - if (ret < 0) - return sprintf(buf, "error number(%ld)",ret); - data = (u8)ret & 0x3f; - - return sprintf(buf, "0x%02x%012x\n", data); -} - -static ssize_t set_response(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - unsigned long data; - int err; - struct cpld_platform_data *pdata = dev->platform_data; - - err = kstrtoul(buf, 16, &data); - if (err) - return err; - data = data >> 48; - i2c_smbus_write_byte_data(pdata[master_cpld].client, QSFP_RESPONSE, (u8)(data & 0xff)); - - return count; -} - -struct platform_led_status{ - int reg_data; - char *led_status; - int led_id; -}; - -static struct platform_led_status led_info[] = { - { - .reg_data = 0x00,//0000 0000 - .led_status = "fan_off", - .led_id = 0, - }, - { - .reg_data = 1 << 6,//0100 0000 - .led_status = "fan_Amber", - .led_id = 0, - }, - { - .reg_data = 2 << 6,//1000 0000 - .led_status = "fan_green", - .led_id = 0, - }, - { - .reg_data = 3 << 6,//1100 0000 - .led_status = "fan_Blinking_yellow", - .led_id = 0, - }, - { - .reg_data = 0x00, - .led_status = "sys_Blinking_green", - .led_id = 1, - }, - { - .reg_data = 1 << 4, - .led_status = "sys_green", - .led_id = 1, - }, - { - .reg_data = 2 << 4, - .led_status = "sys_Amber", - .led_id = 1, - }, - { - .reg_data = 3 << 4 , - .led_status = "sys_Amber", - .led_id = 1, - }, - { - .reg_data = 0x00, - .led_status = "pwr_off", - .led_id = 2, - }, - { - .reg_data = 1 << 1, - .led_status = "pwr_Amber", - .led_id = 2, - }, - { - .reg_data = 2 << 1, - .led_status = "pwr_green", - .led_id = 2, - }, - { - .reg_data = 3 << 1, - .led_status = "pwr_Blinking_Amber", - .led_id = 2, - }, - { - .reg_data = 0x00, - .led_status = "fan4_off", - .led_id = 3, - }, - { - .reg_data = 1 << 6, - .led_status = "fan4_green", - .led_id = 3, - }, - { - .reg_data = 2 << 6, - .led_status = "fan4_Amber", - .led_id = 3, - }, - { - .reg_data = 0x00, - .led_status = "fan3_off", - .led_id = 4, - }, - { - .reg_data = 1 << 4, - .led_status = "fan3_green", - .led_id = 4, - }, - { - .reg_data = 2 << 4, - .led_status = "fan3_Amber", - .led_id = 4, - }, - { - .reg_data = 0x00, - .led_status = "fan2_off", - .led_id = 5, - }, - { - .reg_data = 1 << 2, - .led_status = "fan2_green", - .led_id = 5, - }, - { - .reg_data = 1 << 3, - .led_status = "fan2_Amber", - .led_id = 5, - }, - { - .reg_data = 0x00, - .led_status = "fan1_off", - .led_id = 6, - }, - { - .reg_data = 1, - .led_status = "fan1_green", - .led_id = 6, - }, - { - .reg_data = 2, - .led_status = "fan1_Amber", - .led_id = 6, - }, -}; - -struct platform_led_data{ - int reg_addr; - int mask; -}; - -static struct platform_led_data led_data[] = { - { - .reg_addr = LED_REG, //0x04 - .mask = 0xc0,//1100 0000 - }, - { - .reg_addr = LED_REG, - .mask = 0x30,//0011 0000 - }, - { - .reg_addr = LED_REG, - .mask = 0x06,//0000 0110 - }, - { - .reg_addr = FAN_LED_REG,//0x05 - .mask = 0xc0,//1100 0000 - }, - { - .reg_addr = FAN_LED_REG, - .mask = 0x30,//0011 0000 - }, - { - .reg_addr = FAN_LED_REG, - .mask = 0x0c,//0000 1100 - }, - { - .reg_addr = FAN_LED_REG, - .mask = 0x03,//0000 0011 - }, -}; - - -static ssize_t get_led_color(struct device *dev, struct device_attribute *devattr, char *buf) -{ - char str[9][20] = {0}; - int board_data; - int led_data_number; - int led_info_number; - struct cpld_platform_data *pdata = dev->platform_data; - - for(led_data_number = 0; led_data_number < ARRAY_SIZE(led_data); led_data_number++){ - board_data = i2c_smbus_read_byte_data(pdata[slave_cpld].client, led_data[led_data_number].reg_addr); - if(board_data >= 0){ - board_data &= led_data[led_data_number].mask; - for(led_info_number = 0; led_info_number < ARRAY_SIZE(led_info); led_info_number++){ - if (led_data_number == led_info[led_info_number].led_id \ - && board_data == led_info[led_info_number].reg_data){ - sprintf(str[led_data_number], "%s", led_info[led_info_number].led_status); - } - } - } - else - printk( KERN_ERR "Missing LED board data\n"); - } - return sprintf(buf,"%s\n%s\n%s\n%s\n%s\n%s\n%s\n",str[0],str[1],str[2],str[3],str[4],str[5],str[6]); -} - -static ssize_t set_led_color(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - int led_info_number; - int led_data_number; - int str_compar; - int led_reg_value; - struct cpld_platform_data *pdata = dev->platform_data; - - for(led_info_number = 0; led_info_number < ARRAY_SIZE(led_info); led_info_number++){ - str_compar = strncmp(buf,led_info[led_info_number].led_status,strlen(led_info[led_info_number].led_status)); - if(str_compar == 0){ - for(led_data_number = 0; led_data_number < ARRAY_SIZE(led_data); led_data_number++){ - if(led_info[led_info_number].led_id == led_data_number){ - led_reg_value = i2c_smbus_read_byte_data(pdata[slave_cpld].client, led_data[led_data_number].reg_addr); - if(led_reg_value >= 0){ - led_reg_value &= (~led_data[led_data_number].mask); - led_reg_value |= led_info[led_info_number].reg_data; - i2c_smbus_write_byte_data(pdata[slave_cpld].client, (u8)(led_data[led_data_number].reg_addr & 0xff), (u8)(led_reg_value & 0xff)); - } - else - printk( KERN_ERR "Missing LED reg. data\n"); - } - } - } - } - return count; -} - -static DEVICE_ATTR(sfp_response, S_IWUSR | S_IRUGO, get_response, set_response ); -static DEVICE_ATTR(sfp_present, S_IRUGO, get_present, NULL ); -static DEVICE_ATTR(sfp_lpmode, S_IWUSR | S_IRUGO, get_lpmode, set_lpmode ); -static DEVICE_ATTR(sfp_reset, S_IWUSR | S_IRUGO, get_reset, set_reset ); - -static DEVICE_ATTR(led_control, S_IRUGO | S_IWUSR, get_led_color, set_led_color); - -static struct attribute *ag5648_cpld_attrs[] = { - &dev_attr_sfp_response.attr, - &dev_attr_sfp_present.attr, - &dev_attr_sfp_lpmode.attr, - &dev_attr_sfp_reset.attr, - &dev_attr_led_control.attr, - NULL, -}; - -static struct attribute_group ag5648_cpld_attr_grp = { - .attrs = ag5648_cpld_attrs, -}; - -/* CPLD -- driver */ -static int __init cpld_probe(struct platform_device *pdev) -{ - struct cpld_platform_data *pdata; - struct i2c_adapter *parent; - int ret,i; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "CPLD platform data not found\n"); - return -ENODEV; - } - - parent = i2c_get_adapter(BUS2); - if (!parent) { - printk(KERN_WARNING "Parent adapter (%d) not found\n",BUS2); - return -ENODEV; - } - - for (i = 0; i < ARRAY_SIZE(ag5648_cpld_platform_data); i++) { - pdata[i].client = i2c_new_dummy(parent, pdata[i].reg_addr); - if (!pdata[i].client) { - printk(KERN_WARNING "Fail to create dummy i2c client for addr %d\n", pdata[i].reg_addr); - goto error; - } - } - - ret = sysfs_create_group(&pdev->dev.kobj, &ag5648_cpld_attr_grp); - if (ret) { - printk(KERN_WARNING "Fail to create cpld attribute group"); - goto error; - } - - return 0; - -error: - i--; - for (; i >= 0; i--) { - if (pdata[i].client) { - i2c_unregister_device(pdata[i].client); - } - } - i2c_put_adapter(parent); - - return -ENODEV; -} - -static int __exit cpld_remove(struct platform_device *pdev) -{ - struct i2c_adapter *parent = NULL; - struct cpld_platform_data *pdata = pdev->dev.platform_data; - int i; - sysfs_remove_group(&pdev->dev.kobj, &ag5648_cpld_attr_grp); - - if (!pdata) { - dev_err(&pdev->dev, "Missing platform data\n"); - } - else { - for (i = 0; i < ARRAY_SIZE(ag5648_cpld_platform_data); i++) { - if (pdata[i].client) { - if (!parent) { - parent = (pdata[i].client)->adapter; - } - i2c_unregister_device(pdata[i].client); - } - } - } - - i2c_put_adapter(parent); - - return 0; -} - -static struct platform_driver cpld_driver = { - .probe = cpld_probe, - .remove = __exit_p(cpld_remove), - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag5648-cpld", - }, -}; - -/*---------------- CPLD - end ------------- */ - -/*---------------- MUX - start ------------- */ - -struct swpld_mux_platform_data { - int parent; - int base_nr; - int reg_addr; - struct i2c_client *cpld; -}; - -struct swpld_mux { - struct i2c_adapter *parent; - struct i2c_adapter **child; - struct swpld_mux_platform_data data; -}; - -static struct swpld_mux_platform_data ag5648_swpld_mux_platform_data[] = { - { - .parent = BUS4, - .base_nr = BUS4_BASE_NUM, - .cpld = NULL, - .reg_addr = BUS4_MUX_REG , - }, -}; - - -static struct platform_device ag5648_swpld_mux[] = { - { - .name = "delta-ag5648-swpld-mux", - .id = 0, - .dev = { - .platform_data = &ag5648_swpld_mux_platform_data[0], - .release = device_release, - }, - }, -}; - - -static int cpld_reg_write_byte(struct i2c_client *client, u8 regaddr, u8 val) -{ - union i2c_smbus_data data; - - data.byte = val; - return client->adapter->algo->smbus_xfer(client->adapter, client->addr, - client->flags, - I2C_SMBUS_WRITE, - regaddr, I2C_SMBUS_BYTE_DATA, &data); -} - -static int swpld_mux_select(struct i2c_adapter *adap, void *data, u8 chan) -{ - struct swpld_mux *mux = data; - u8 swpld_mux_val=0; - if ( mux->data.base_nr == BUS4_BASE_NUM ) - { - swpld_mux_val = (chan + 0x01); - } - else - { - swpld_mux_val = 0x00; - } - swpld_mux_val=swpld_mux_val & (u8)0x3F; - - return cpld_reg_write_byte(mux->data.cpld, mux->data.reg_addr, (u8)(swpld_mux_val & 0xff)); -} - -static int __init swpld_mux_probe(struct platform_device *pdev) -{ - struct swpld_mux *mux; - struct swpld_mux_platform_data *pdata; - struct i2c_adapter *parent; - int i, ret, dev_num; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "SWPLD platform data not found\n"); - return -ENODEV; - } - - parent = i2c_get_adapter(pdata->parent); - if (!parent) { - dev_err(&pdev->dev, "Parent adapter (%d) not found\n", pdata->parent); - return -ENODEV; - } - - /* Judge bus number to decide how many devices*/ - switch (pdata->parent) { - case BUS4: - dev_num = BUS4_DEV_NUM; - break; - default : - dev_num = DEFAULT_NUM; - break; - } - - mux = kzalloc(sizeof(*mux), GFP_KERNEL); - if (!mux) { - ret = -ENOMEM; - printk(KERN_ERR "Failed to allocate memory for mux\n"); - goto alloc_failed; - } - - mux->parent = parent; - mux->data = *pdata; - mux->child = kzalloc(sizeof(struct i2c_adapter *) * dev_num, GFP_KERNEL); - if (!mux->child) { - ret = -ENOMEM; - printk(KERN_ERR "Failed to allocate memory for device on mux\n"); - goto alloc_failed2; - } - - for (i = 0; i < dev_num; i++) { - int nr = pdata->base_nr + i; - unsigned int class = 0; - - mux->child[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, - nr, i, class, - swpld_mux_select, NULL); - if (!mux->child[i]) { - ret = -ENODEV; - dev_err(&pdev->dev, "Failed to add adapter %d\n", i); - goto add_adapter_failed; - } - } - - platform_set_drvdata(pdev, mux); - return 0; - -add_adapter_failed: - for (; i > 0; i--) - i2c_del_mux_adapter(mux->child[i - 1]); - kfree(mux->child); -alloc_failed2: - kfree(mux); -alloc_failed: - i2c_put_adapter(parent); - - return ret; -} - - -static int __exit swpld_mux_remove(struct platform_device *pdev) -{ - int i; - struct swpld_mux *mux = platform_get_drvdata(pdev); - struct swpld_mux_platform_data *pdata; - struct i2c_adapter *parent; - int dev_num; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "SWPLD platform data not found\n"); - return -ENODEV; - } - - parent = i2c_get_adapter(pdata->parent); - if (!parent) { - dev_err(&pdev->dev, "Parent adapter (%d) not found\n", - pdata->parent); - return -ENODEV; - } - switch (pdata->parent) { - case BUS4: - dev_num = BUS4_DEV_NUM; - break; - default : - dev_num = DEFAULT_NUM; - break; - } - - for (i = 0; i < dev_num; i++) - i2c_del_mux_adapter(mux->child[i]); - - platform_set_drvdata(pdev, NULL); - i2c_put_adapter(mux->parent); - kfree(mux->child); - kfree(mux); - - return 0; -} - -static struct platform_driver swpld_mux_driver = { - .probe = swpld_mux_probe, - .remove = __exit_p(swpld_mux_remove), /* TODO */ - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag5648-swpld-mux", - }, -}; -/*---------------- MUX - end ------------- */ - - -/*---------------- module initialization ------------- */ -static void __init delta_ag5648_platform_init(void) -{ - struct i2c_client *client; - struct i2c_adapter *adapter; - struct cpld_platform_data *cpld_pdata; - struct swpld_mux_platform_data *swpld_pdata; - int ret,i = 0; - - //Use pca9547 in i2c_mux_pca954x.c - adapter = i2c_get_adapter(BUS1); - //client = i2c_new_device(adapter, &i2c_info_pca9548[0]); - i2c_client_9548 = i2c_new_device(adapter, &i2c_info_pca9548[0]); - i2c_put_adapter(adapter); - - // set the CPLD prob and remove - ret = platform_driver_register(&cpld_driver); - if (ret) { - printk(KERN_WARNING "Fail to register cpld driver\n"); - goto error_cpld_driver; - } - - // register the mux prob which call the CPLD - ret = platform_driver_register(&swpld_mux_driver); - if (ret) { - printk(KERN_WARNING "Fail to register swpld mux driver\n"); - goto error_swpld_mux_driver; - } - - // register the i2c devices - ret = platform_driver_register(&i2c_device_driver); - if (ret) { - printk(KERN_WARNING "Fail to register i2c device driver\n"); - goto error_i2c_device_driver; - } - - // register the CPLD - ret = platform_device_register(&ag5648_cpld); - if (ret) { - printk(KERN_WARNING "Fail to create cpld device\n"); - goto error_ag5648_cpld; - } - // link the CPLD and the Mux - cpld_pdata = ag5648_cpld.dev.platform_data; - - - swpld_pdata = ag5648_swpld_mux[0].dev.platform_data; - swpld_pdata->cpld = cpld_pdata[master_cpld].client; - ret = platform_device_register(&ag5648_swpld_mux[0]); - if (ret) { - printk(KERN_WARNING "Fail to create swpld mux %d\n", i); - goto error_ag5648_swpld_mux; - } - - for (i = 0; i < ARRAY_SIZE(ag5648_i2c_device); i++) - { - ret = platform_device_register(&ag5648_i2c_device[i]); - if (ret) { - printk(KERN_WARNING "Fail to create i2c device %d\n", i); - goto error_ag5648_i2c_device; - } - } - - if (ret) - goto error_ag5648_swpld_mux; - - return 0; - -error_ag5648_i2c_device: - i--; - for (; i >= 0; i--) { - platform_device_unregister(&ag5648_i2c_device[i]); - } - i = ARRAY_SIZE(ag5648_swpld_mux); -error_ag5648_swpld_mux: - i--; - for (; i >= 0; i--) { - platform_device_unregister(&ag5648_swpld_mux[0]); - } - platform_driver_unregister(&ag5648_cpld); -error_ag5648_cpld: - platform_driver_unregister(&i2c_device_driver); -error_i2c_device_driver: - platform_driver_unregister(&swpld_mux_driver); -error_swpld_mux_driver: - platform_driver_unregister(&cpld_driver); -error_cpld_driver: - return ret; -} - -static void __exit delta_ag5648_platform_exit(void) -{ - int i = 0; - - for ( i = 0; i < ARRAY_SIZE(ag5648_i2c_device); i++ ) { - platform_device_unregister(&ag5648_i2c_device[i]); - } - - for (i = 0; i < ARRAY_SIZE(ag5648_swpld_mux); i++) { - platform_device_unregister(&ag5648_swpld_mux[i]); - } - - platform_device_unregister(&ag5648_cpld); - platform_driver_unregister(&i2c_device_driver); - platform_driver_unregister(&cpld_driver); - platform_driver_unregister(&swpld_mux_driver); - - i2c_unregister_device(i2c_client_9548); -} - -module_init(delta_ag5648_platform_init); -module_exit(delta_ag5648_platform_exit); - -MODULE_DESCRIPTION("DNI ag5648 Platform Support"); -MODULE_AUTHOR("Neal Tai "); -MODULE_LICENSE("GPL"); +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BUS4_DEV_NUM 54 +#define DEFAULT_NUM 1 +#define BUS4_BASE_NUM 10 +#define BUS4_MUX_REG 0x18 + +#define TEMP_FAN_VAL 0x06 +#define FANIO_CTL_VAL 0x07 +#define FAN_CTRL_VAL 0x05 +#define PSU1_VAL 0x00 +#define PSU2_VAL 0x20 +#define HOT_SWAP1_VAL 0x10 +#define HOT_SWAP2_VAL 0x30 + +#define SYSTEM_CPLD_REG 0x31 +#define MASTER_CPLD_REG 0x35 +#define SLAVE_CPLD_REG 0x39 + +#define FAN_LED_REG 0x05 +#define LED_REG 0x04 + +#define SFP_PRESENCE_1 0x08 +#define SFP_PRESENCE_2 0x09 +#define SFP_PRESENCE_3 0x0a +#define SFP_PRESENCE_4 0x0b +#define SFP_PRESENCE_5 0x0c +#define SFP_PRESENCE_6 0x08 +#define SFP_PRESENCE_7 0x09 +#define QSFP_PRESENCE 0x12 + +#define QSFP_RESPONSE 0x10 +#define QSFP_LP_MODE 0x11 +#define QSFP_RESET 0x13 + + +#define SFF8436_INFO(data) \ + .type = "sff8436", .addr = 0x50, .platform_data = (data) + +#define SFF_8436_PORT(eedata) \ + .byte_len = 256, .page_size = 1, .flags = SFF_8436_FLAG_READONLY + +#define ag5648_i2c_device_num(NUM){ \ + .name = "delta-ag5648-i2c-device", \ + .id = NUM, \ + .dev = { \ + .platform_data = &ag5648_i2c_device_platform_data[NUM], \ + .release = device_release, \ + }, \ +} + +/*Define struct to get client of i2c_new_deivce */ +struct i2c_client * i2c_client_9548; + +enum{ + BUS0 = 0, + BUS1, + BUS2, + BUS3, + BUS4, + BUS5, + BUS6, + BUS7, +}; + +unsigned char reverse_8bits(unsigned char c) +{ + unsigned char s = 0; + int i; + for (i = 0; i < 8; ++i) { + s <<= 1; + s |= c & 1; + c >>= 1; + } + return s; +} +/*---------------- I2C device - start ------------- */ +static void device_release(struct device *dev) +{ + return; +} + +struct i2c_device_platform_data { + int parent; + struct i2c_board_info info; + struct i2c_client *client; +}; +/* pca9548 - add 8 bus */ +static struct pca954x_platform_mode pca954x_mode[] = { + { .adap_id = 2, + .deselect_on_exit = 1, + }, + { .adap_id = 3, + .deselect_on_exit = 1, + }, + { .adap_id = 4, + .deselect_on_exit = 1, + }, + { .adap_id = 5, + .deselect_on_exit = 1, + }, + { .adap_id = 6, + .deselect_on_exit = 1, + }, + { .adap_id = 7, + .deselect_on_exit = 1, + }, + { .adap_id = 8, + .deselect_on_exit = 1, + }, + { .adap_id = 9, + .deselect_on_exit = 1, + }, +}; + +static struct pca954x_platform_data pca954x_data = { + .modes = pca954x_mode, + .num_modes = ARRAY_SIZE(pca954x_mode), +}; + +static struct i2c_board_info __initdata i2c_info_pca9548[] = +{ + { + I2C_BOARD_INFO("pca9548", 0x70), + .platform_data = &pca954x_data, + }, +}; + + +static struct sff_8436_platform_data sff_8436_port[] = { + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, + { SFF_8436_PORT() }, +}; + + +static struct i2c_device_platform_data ag5648_i2c_device_platform_data[] = { + { + /* id eeprom (0x53) */ + .parent = 2, + .info = { I2C_BOARD_INFO("24c02", 0x53) }, + .client = NULL, + }, + { + /* tmp75 (0x4d) */ + .parent = 2, + .info = { I2C_BOARD_INFO("tmp75", 0x4d) }, + .client = NULL, + }, + { + /* tmp75 (0x49) */ + .parent = 3, + .info = { I2C_BOARD_INFO("tmp75", 0x49) }, + .client = NULL, + }, + { + /* tmp75 (0x4b) */ + .parent = 3, + .info = { I2C_BOARD_INFO("tmp75", 0x4b) }, + }, + { + /* tmp75 (0x4c) */ + .parent = 3, + .info = { I2C_BOARD_INFO("tmp75", 0x4c) }, + .client = NULL, + }, + { + /* tmp75 (0x4e) */ + .parent = 3, + .info = { I2C_BOARD_INFO("tmp75", 0x4e) }, + .client = NULL, + }, + { + /* tmp75 (0x4f) */ + .parent = 3, + .info = { I2C_BOARD_INFO("tmp75", 0x4f) }, + }, + { + /* tmp75 (0x4d) */ + .parent = 3, + .info = { I2C_BOARD_INFO("emc2305", 0x4d) }, + .client = NULL, + }, + { + /* tmp75 (0x4d) */ + .parent = 5, + .info = { I2C_BOARD_INFO("emc2305", 0x4d) }, + .client = NULL, + }, + { + /* tmp75 (0x40) */ + .parent = 3, + .info = { I2C_BOARD_INFO("ltc4215", 0x40) }, + .client = NULL, + }, + { + /* tmp75 (0x42) */ + .parent = 3, + .info = { I2C_BOARD_INFO("ltc4215", 0x42) }, + }, + { + /* psu1 (0x59) */ + .parent = 6, + .info = { I2C_BOARD_INFO("dni_ag5648_psu", 0x59) }, + .client = NULL, + }, + { + /* psu2 (0x58) */ + .parent = 6, + .info = { I2C_BOARD_INFO("dni_ag5648_psu", 0x58) }, + }, + { + /* qsfp 1 (0x50) */ + .parent = 10, + .info = { SFF8436_INFO(&sff_8436_port[0]) }, + .client = NULL, + }, + { + /* qsfp 2 (0x50) */ + .parent = 11, + .info = { SFF8436_INFO(&sff_8436_port[1]) }, + .client = NULL, + }, + { + /* qsfp 3 (0x50) */ + .parent = 12, + .info = { SFF8436_INFO(&sff_8436_port[2]) }, + .client = NULL, + }, + { + /* qsfp 4 (0x50) */ + .parent = 13, + .info = { SFF8436_INFO(&sff_8436_port[3]) }, + .client = NULL, + }, + { + /* qsfp 5 (0x50) */ + .parent = 14, + .info = { SFF8436_INFO(&sff_8436_port[4]) }, + .client = NULL, + }, + { + /* qsfp 6 (0x50) */ + .parent = 15, + .info = { SFF8436_INFO(&sff_8436_port[5]) }, + .client = NULL, + }, + { + /* qsfp 7 (0x50) */ + .parent = 16, + .info = { SFF8436_INFO(&sff_8436_port[6]) }, + .client = NULL, + }, + { + /* qsfp 8 (0x50) */ + .parent = 17, + .info = { SFF8436_INFO(&sff_8436_port[7]) }, + .client = NULL, + }, + { + /* qsfp 9 (0x50) */ + .parent = 18, + .info = { SFF8436_INFO(&sff_8436_port[8]) }, + .client = NULL, + }, + { + /* qsfp 10 (0x50) */ + .parent = 19, + .info = { SFF8436_INFO(&sff_8436_port[9]) }, + .client = NULL, + }, + { + /* qsfp 11 (0x50) */ + .parent = 20, + .info = { SFF8436_INFO(&sff_8436_port[10]) }, + .client = NULL, + }, + { + /* qsfp 12 (0x50) */ + .parent = 21, + .info = { SFF8436_INFO(&sff_8436_port[11]) }, + .client = NULL, + }, + { + /* qsfp 13 (0x50) */ + .parent = 22, + .info = { SFF8436_INFO(&sff_8436_port[12]) }, + .client = NULL, + }, + { + /* qsfp 14 (0x50) */ + .parent = 23, + .info = { SFF8436_INFO(&sff_8436_port[13]) }, + .client = NULL, + }, + { + /* qsfp 15 (0x50) */ + .parent = 24, + .info = { SFF8436_INFO(&sff_8436_port[14]) }, + .client = NULL, + }, + { + /* qsfp 16 (0x50) */ + .parent = 25, + .info = { SFF8436_INFO(&sff_8436_port[15]) }, + .client = NULL, + }, + { + /* qsfp 17 (0x50) */ + .parent = 26, + .info = { SFF8436_INFO(&sff_8436_port[16]) }, + .client = NULL, + }, + { + /* qsfp 18 (0x50) */ + .parent = 27, + .info = { SFF8436_INFO(&sff_8436_port[17]) }, + .client = NULL, + }, + { + /* qsfp 19 (0x50) */ + .parent = 28, + .info = { SFF8436_INFO(&sff_8436_port[18]) }, + .client = NULL, + }, + { + /* qsfp 20 (0x50) */ + .parent = 29, + .info = { SFF8436_INFO(&sff_8436_port[19]) }, + .client = NULL, + }, + { + /* qsfp 21 (0x50) */ + .parent = 30, + .info = { SFF8436_INFO(&sff_8436_port[20]) }, + .client = NULL, + }, + { + /* qsfp 22 (0x50) */ + .parent = 31, + .info = { SFF8436_INFO(&sff_8436_port[21]) }, + .client = NULL, + }, + { + /* qsfp 23 (0x50) */ + .parent = 32, + .info = { SFF8436_INFO(&sff_8436_port[22]) }, + .client = NULL, + }, + { + /* qsfp 24 (0x50) */ + .parent = 33, + .info = { SFF8436_INFO(&sff_8436_port[23]) }, + .client = NULL, + }, + { + /* qsfp 25 (0x50) */ + .parent = 34, + .info = { SFF8436_INFO(&sff_8436_port[24]) }, + .client = NULL, + }, + { + /* qsfp 26 (0x50) */ + .parent = 35, + .info = { SFF8436_INFO(&sff_8436_port[25]) }, + .client = NULL, + }, + { + /* qsfp 27 (0x50) */ + .parent = 36, + .info = { SFF8436_INFO(&sff_8436_port[26]) }, + .client = NULL, + }, + { + /* qsfp 28 (0x50) */ + .parent = 37, + .info = { SFF8436_INFO(&sff_8436_port[27]) }, + .client = NULL, + }, + { + /* qsfp 29 (0x50) */ + .parent = 38, + .info = { SFF8436_INFO(&sff_8436_port[28]) }, + .client = NULL, + }, + { + /* qsfp 30 (0x50) */ + .parent = 39, + .info = { SFF8436_INFO(&sff_8436_port[29]) }, + .client = NULL, + }, + { + /* qsfp 31 (0x50) */ + .parent = 40, + .info = { SFF8436_INFO(&sff_8436_port[30]) }, + .client = NULL, + }, + { + /* qsfp 32 (0x50) */ + .parent = 41, + .info = { SFF8436_INFO(&sff_8436_port[31]) }, + .client = NULL, + }, + { + /* qsfp 33 (0x50) */ + .parent = 42, + .info = { SFF8436_INFO(&sff_8436_port[32]) }, + .client = NULL, + }, + { + /* qsfp 34 (0x50) */ + .parent = 43, + .info = { SFF8436_INFO(&sff_8436_port[33]) }, + .client = NULL, + }, + { + /* qsfp 35 (0x50) */ + .parent = 44, + .info = { SFF8436_INFO(&sff_8436_port[34]) }, + .client = NULL, + }, + { + /* qsfp 36 (0x50) */ + .parent = 45, + .info = { SFF8436_INFO(&sff_8436_port[35]) }, + .client = NULL, + }, + { + /* qsfp 37 (0x50) */ + .parent = 46, + .info = { SFF8436_INFO(&sff_8436_port[36]) }, + .client = NULL, + }, + { + /* qsfp 38 (0x50) */ + .parent = 47, + .info = { SFF8436_INFO(&sff_8436_port[37]) }, + .client = NULL, + }, + { + /* qsfp 39 (0x50) */ + .parent = 48, + .info = { SFF8436_INFO(&sff_8436_port[38]) }, + .client = NULL, + }, + { + /* qsfp 40 (0x50) */ + .parent = 49, + .info = { SFF8436_INFO(&sff_8436_port[39]) }, + .client = NULL, + }, + { + /* qsfp 41 (0x50) */ + .parent = 50, + .info = { SFF8436_INFO(&sff_8436_port[40]) }, + .client = NULL, + }, + { + /* qsfp 42 (0x50) */ + .parent = 51, + .info = { SFF8436_INFO(&sff_8436_port[41]) }, + .client = NULL, + }, + { + /* qsfp 43 (0x50) */ + .parent = 52, + .info = { SFF8436_INFO(&sff_8436_port[42]) }, + .client = NULL, + }, + { + /* qsfp 44 (0x50) */ + .parent = 53, + .info = { SFF8436_INFO(&sff_8436_port[43]) }, + .client = NULL, + }, + { + /* qsfp 45 (0x50) */ + .parent = 54, + .info = { SFF8436_INFO(&sff_8436_port[44]) }, + .client = NULL, + }, + { + /* qsfp 46 (0x50) */ + .parent = 55, + .info = { SFF8436_INFO(&sff_8436_port[45]) }, + .client = NULL, + }, + { + /* qsfp 47 (0x50) */ + .parent = 56, + .info = { SFF8436_INFO(&sff_8436_port[46]) }, + .client = NULL, + }, + { + /* qsfp 48 (0x50) */ + .parent = 57, + .info = { SFF8436_INFO(&sff_8436_port[47]) }, + .client = NULL, + }, + { + /* qsfp 49 (0x50) */ + .parent = 58, + .info = { SFF8436_INFO(&sff_8436_port[48]) }, + .client = NULL, + }, + { + /* qsfp 50 (0x50) */ + .parent = 59, + .info = { SFF8436_INFO(&sff_8436_port[49]) }, + .client = NULL, + }, + { + /* qsfp 51 (0x50) */ + .parent = 60, + .info = { SFF8436_INFO(&sff_8436_port[50]) }, + .client = NULL, + }, + { + /* qsfp 52 (0x50) */ + .parent = 61, + .info = { SFF8436_INFO(&sff_8436_port[51]) }, + .client = NULL, + }, + { + /* qsfp 53 (0x50) */ + .parent = 62, + .info = { SFF8436_INFO(&sff_8436_port[52]) }, + .client = NULL, + }, + { + /* qsfp 54 (0x50) */ + .parent = 63, + .info = { SFF8436_INFO(&sff_8436_port[53]) }, + .client = NULL, + }, +}; + + +static struct platform_device ag5648_i2c_device[] = { + ag5648_i2c_device_num(0), + ag5648_i2c_device_num(1), + ag5648_i2c_device_num(2), + ag5648_i2c_device_num(3), + ag5648_i2c_device_num(4), + ag5648_i2c_device_num(5), + ag5648_i2c_device_num(6), + ag5648_i2c_device_num(7), + ag5648_i2c_device_num(8), + ag5648_i2c_device_num(9), + ag5648_i2c_device_num(10), + ag5648_i2c_device_num(11), + ag5648_i2c_device_num(12), + ag5648_i2c_device_num(13), + ag5648_i2c_device_num(14), + ag5648_i2c_device_num(15), + ag5648_i2c_device_num(16), + ag5648_i2c_device_num(17), + ag5648_i2c_device_num(18), + ag5648_i2c_device_num(19), + ag5648_i2c_device_num(20), + ag5648_i2c_device_num(21), + ag5648_i2c_device_num(22), + ag5648_i2c_device_num(23), + ag5648_i2c_device_num(24), + ag5648_i2c_device_num(25), + ag5648_i2c_device_num(26), + ag5648_i2c_device_num(27), + ag5648_i2c_device_num(28), + ag5648_i2c_device_num(29), + ag5648_i2c_device_num(30), + ag5648_i2c_device_num(31), + ag5648_i2c_device_num(32), + ag5648_i2c_device_num(33), + ag5648_i2c_device_num(34), + ag5648_i2c_device_num(35), + ag5648_i2c_device_num(36), + ag5648_i2c_device_num(37), + ag5648_i2c_device_num(38), + ag5648_i2c_device_num(39), + ag5648_i2c_device_num(40), + ag5648_i2c_device_num(41), + ag5648_i2c_device_num(42), + ag5648_i2c_device_num(43), + ag5648_i2c_device_num(44), + ag5648_i2c_device_num(45), + ag5648_i2c_device_num(46), + ag5648_i2c_device_num(47), + ag5648_i2c_device_num(48), + ag5648_i2c_device_num(49), + ag5648_i2c_device_num(50), + ag5648_i2c_device_num(51), + ag5648_i2c_device_num(52), + ag5648_i2c_device_num(53), + ag5648_i2c_device_num(54), + ag5648_i2c_device_num(55), + ag5648_i2c_device_num(56), + ag5648_i2c_device_num(57), + ag5648_i2c_device_num(58), + ag5648_i2c_device_num(59), + ag5648_i2c_device_num(60), + ag5648_i2c_device_num(61), + ag5648_i2c_device_num(62), + ag5648_i2c_device_num(63), + ag5648_i2c_device_num(64), + ag5648_i2c_device_num(65), + ag5648_i2c_device_num(66), +}; + +/*---------------- I2C device - end ------------- */ + +/*---------------- I2C driver - start ------------- */ +static int __init i2c_device_probe(struct platform_device *pdev) +{ + struct i2c_device_platform_data *pdata; + struct i2c_adapter *parent; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", + pdata->parent); + return -ENODEV; + } + + pdata->client = i2c_new_device(parent, &pdata->info); + if (!pdata->client) { + dev_err(&pdev->dev, "Failed to create i2c client %s at %d\n", + pdata->info.type, pdata->parent); + return -ENODEV; + } + + return 0; +} + +static int __exit i2c_deivce_remove(struct platform_device *pdev) +{ + struct i2c_adapter *parent; + struct i2c_device_platform_data *pdata; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + if (pdata->client) { + parent = (pdata->client)->adapter; + i2c_unregister_device(pdata->client); + i2c_put_adapter(parent); + } + + return 0; +} +static struct platform_driver i2c_device_driver = { + .probe = i2c_device_probe, + .remove = __exit_p(i2c_deivce_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag5648-i2c-device", + } +}; + +/*---------------- I2C driver - end ------------- */ + +/*---------------- CPLD - start ------------- */ + +/* CPLD -- device */ + +enum cpld_type { + system_cpld, + master_cpld, + slave_cpld, +}; + +struct cpld_platform_data { + int reg_addr; + struct i2c_client *client; +}; + +static struct cpld_platform_data ag5648_cpld_platform_data[] = { + [system_cpld] = { + .reg_addr = SYSTEM_CPLD_REG, + }, + [master_cpld] = { + .reg_addr = MASTER_CPLD_REG, + }, + [slave_cpld] = { + .reg_addr = SLAVE_CPLD_REG, + }, +}; + +static struct platform_device ag5648_cpld = { + .name = "delta-ag5648-cpld", + .id = 0, + .dev = { + .platform_data = ag5648_cpld_platform_data, + .release = device_release + }, +}; + +static ssize_t get_present(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + int ret; + u32 data = 0; + u32 data2 = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_1); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data = (u32)(ret & 0xff); + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_2); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data |= (u32)(ret & 0xff) << 8; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_3); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data |= (u32)(ret & 0xff) << 16; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_4); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data |= (u32)(ret & 0xff) << 24; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, SFP_PRESENCE_5); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data2 = ((u32)(ret & 0xf)) ; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, SFP_PRESENCE_6); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data2 |= (u32)(ret & 0xff) << 4; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, SFP_PRESENCE_7); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data2 |= (u32)((ret >> 4) & 0xf) << 12; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, QSFP_PRESENCE); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data2 |= (u32)(ret & 0x3f) << 16; + + return sprintf(buf, "0x%06x%x\n", data2, data); +} + +static ssize_t get_lpmode(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, QSFP_LP_MODE); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data = ((u8)ret & 0x3f) ; + + return sprintf(buf, "0x%02x%012x\n", data, 0); +} + +static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long data; + int err; + + struct cpld_platform_data *pdata = dev->platform_data; + + err = kstrtoul(buf, 16, &data); + if (err) + return err; + + data = data >> 48; + i2c_smbus_write_byte_data(pdata[master_cpld].client, QSFP_LP_MODE, (u8)(data & 0xff)); + + return count; +} + +static ssize_t get_reset(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, QSFP_RESET); + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + + data = ((u8)ret & 0x3f); + + return sprintf(buf, "0x%02x%012x\n", data, 0); +} + +static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long data; + int err; + struct cpld_platform_data *pdata = dev->platform_data; + + err = kstrtoul(buf, 16, &data); + if (err) + return err; + data = data >> 48; + i2c_smbus_write_byte_data(pdata[master_cpld].client, QSFP_RESET, (u8)(data & 0xff)); + + return count; +} + +static ssize_t get_response(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u8 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, QSFP_RESPONSE); + + if (ret < 0) + return sprintf(buf, "error number(%d)",ret); + data = (u8)ret & 0x3f; + + return sprintf(buf, "0x%02x%012x\n", data, 0); +} + +static ssize_t set_response(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long data; + int err; + struct cpld_platform_data *pdata = dev->platform_data; + + err = kstrtoul(buf, 16, &data); + if (err) + return err; + data = data >> 48; + i2c_smbus_write_byte_data(pdata[master_cpld].client, QSFP_RESPONSE, (u8)(data & 0xff)); + + return count; +} + +struct platform_led_status{ + int reg_data; + char *led_status; + int led_id; +}; + +static struct platform_led_status led_info[] = { + { + .reg_data = 0x00,//0000 0000 + .led_status = "fan_off", + .led_id = 0, + }, + { + .reg_data = 1 << 6,//0100 0000 + .led_status = "fan_Amber", + .led_id = 0, + }, + { + .reg_data = 2 << 6,//1000 0000 + .led_status = "fan_green", + .led_id = 0, + }, + { + .reg_data = 3 << 6,//1100 0000 + .led_status = "fan_Blinking_yellow", + .led_id = 0, + }, + { + .reg_data = 0x00, + .led_status = "sys_Blinking_green", + .led_id = 1, + }, + { + .reg_data = 1 << 4, + .led_status = "sys_green", + .led_id = 1, + }, + { + .reg_data = 2 << 4, + .led_status = "sys_Amber", + .led_id = 1, + }, + { + .reg_data = 3 << 4 , + .led_status = "sys_Amber", + .led_id = 1, + }, + { + .reg_data = 0x00, + .led_status = "pwr_off", + .led_id = 2, + }, + { + .reg_data = 1 << 1, + .led_status = "pwr_Amber", + .led_id = 2, + }, + { + .reg_data = 2 << 1, + .led_status = "pwr_green", + .led_id = 2, + }, + { + .reg_data = 3 << 1, + .led_status = "pwr_Blinking_Amber", + .led_id = 2, + }, + { + .reg_data = 0x00, + .led_status = "fan4_off", + .led_id = 3, + }, + { + .reg_data = 1 << 6, + .led_status = "fan4_green", + .led_id = 3, + }, + { + .reg_data = 2 << 6, + .led_status = "fan4_Amber", + .led_id = 3, + }, + { + .reg_data = 0x00, + .led_status = "fan3_off", + .led_id = 4, + }, + { + .reg_data = 1 << 4, + .led_status = "fan3_green", + .led_id = 4, + }, + { + .reg_data = 2 << 4, + .led_status = "fan3_Amber", + .led_id = 4, + }, + { + .reg_data = 0x00, + .led_status = "fan2_off", + .led_id = 5, + }, + { + .reg_data = 1 << 2, + .led_status = "fan2_green", + .led_id = 5, + }, + { + .reg_data = 1 << 3, + .led_status = "fan2_Amber", + .led_id = 5, + }, + { + .reg_data = 0x00, + .led_status = "fan1_off", + .led_id = 6, + }, + { + .reg_data = 1, + .led_status = "fan1_green", + .led_id = 6, + }, + { + .reg_data = 2, + .led_status = "fan1_Amber", + .led_id = 6, + }, +}; + +struct platform_led_data{ + int reg_addr; + int mask; +}; + +static struct platform_led_data led_data[] = { + { + .reg_addr = LED_REG, //0x04 + .mask = 0xc0,//1100 0000 + }, + { + .reg_addr = LED_REG, + .mask = 0x30,//0011 0000 + }, + { + .reg_addr = LED_REG, + .mask = 0x06,//0000 0110 + }, + { + .reg_addr = FAN_LED_REG,//0x05 + .mask = 0xc0,//1100 0000 + }, + { + .reg_addr = FAN_LED_REG, + .mask = 0x30,//0011 0000 + }, + { + .reg_addr = FAN_LED_REG, + .mask = 0x0c,//0000 1100 + }, + { + .reg_addr = FAN_LED_REG, + .mask = 0x03,//0000 0011 + }, +}; + + +static ssize_t get_led_color(struct device *dev, struct device_attribute *devattr, char *buf) +{ + char str[9][20] = {0}; + int board_data; + int led_data_number; + int led_info_number; + struct cpld_platform_data *pdata = dev->platform_data; + + for(led_data_number = 0; led_data_number < ARRAY_SIZE(led_data); led_data_number++){ + board_data = i2c_smbus_read_byte_data(pdata[slave_cpld].client, led_data[led_data_number].reg_addr); + if(board_data >= 0){ + board_data &= led_data[led_data_number].mask; + for(led_info_number = 0; led_info_number < ARRAY_SIZE(led_info); led_info_number++){ + if (led_data_number == led_info[led_info_number].led_id \ + && board_data == led_info[led_info_number].reg_data){ + sprintf(str[led_data_number], "%s", led_info[led_info_number].led_status); + } + } + } + else + printk( KERN_ERR "Missing LED board data\n"); + } + return sprintf(buf,"%s\n%s\n%s\n%s\n%s\n%s\n%s\n",str[0],str[1],str[2],str[3],str[4],str[5],str[6]); +} + +static ssize_t set_led_color(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + int led_info_number; + int led_data_number; + int str_compar; + int led_reg_value; + struct cpld_platform_data *pdata = dev->platform_data; + + for(led_info_number = 0; led_info_number < ARRAY_SIZE(led_info); led_info_number++){ + str_compar = strncmp(buf,led_info[led_info_number].led_status,strlen(led_info[led_info_number].led_status)); + if(str_compar == 0){ + for(led_data_number = 0; led_data_number < ARRAY_SIZE(led_data); led_data_number++){ + if(led_info[led_info_number].led_id == led_data_number){ + led_reg_value = i2c_smbus_read_byte_data(pdata[slave_cpld].client, led_data[led_data_number].reg_addr); + if(led_reg_value >= 0){ + led_reg_value &= (~led_data[led_data_number].mask); + led_reg_value |= led_info[led_info_number].reg_data; + i2c_smbus_write_byte_data(pdata[slave_cpld].client, (u8)(led_data[led_data_number].reg_addr & 0xff), (u8)(led_reg_value & 0xff)); + } + else + printk( KERN_ERR "Missing LED reg. data\n"); + } + } + } + } + return count; +} + +static DEVICE_ATTR(sfp_response, S_IWUSR | S_IRUGO, get_response, set_response ); +static DEVICE_ATTR(sfp_present, S_IRUGO, get_present, NULL ); +static DEVICE_ATTR(sfp_lpmode, S_IWUSR | S_IRUGO, get_lpmode, set_lpmode ); +static DEVICE_ATTR(sfp_reset, S_IWUSR | S_IRUGO, get_reset, set_reset ); + +static DEVICE_ATTR(led_control, S_IRUGO | S_IWUSR, get_led_color, set_led_color); + +static struct attribute *ag5648_cpld_attrs[] = { + &dev_attr_sfp_response.attr, + &dev_attr_sfp_present.attr, + &dev_attr_sfp_lpmode.attr, + &dev_attr_sfp_reset.attr, + &dev_attr_led_control.attr, + NULL, +}; + +static struct attribute_group ag5648_cpld_attr_grp = { + .attrs = ag5648_cpld_attrs, +}; + +/* CPLD -- driver */ +static int __init cpld_probe(struct platform_device *pdev) +{ + struct cpld_platform_data *pdata; + struct i2c_adapter *parent; + int ret,i; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "CPLD platform data not found\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(BUS2); + if (!parent) { + printk(KERN_WARNING "Parent adapter (%d) not found\n",BUS2); + return -ENODEV; + } + + for (i = 0; i < ARRAY_SIZE(ag5648_cpld_platform_data); i++) { + pdata[i].client = i2c_new_dummy(parent, pdata[i].reg_addr); + if (!pdata[i].client) { + printk(KERN_WARNING "Fail to create dummy i2c client for addr %d\n", pdata[i].reg_addr); + goto error; + } + } + + ret = sysfs_create_group(&pdev->dev.kobj, &ag5648_cpld_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create cpld attribute group"); + goto error; + } + + return 0; + +error: + i--; + for (; i >= 0; i--) { + if (pdata[i].client) { + i2c_unregister_device(pdata[i].client); + } + } + i2c_put_adapter(parent); + + return -ENODEV; +} + +static int __exit cpld_remove(struct platform_device *pdev) +{ + struct i2c_adapter *parent = NULL; + struct cpld_platform_data *pdata = pdev->dev.platform_data; + int i; + sysfs_remove_group(&pdev->dev.kobj, &ag5648_cpld_attr_grp); + + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + } + else { + for (i = 0; i < ARRAY_SIZE(ag5648_cpld_platform_data); i++) { + if (pdata[i].client) { + if (!parent) { + parent = (pdata[i].client)->adapter; + } + i2c_unregister_device(pdata[i].client); + } + } + } + + i2c_put_adapter(parent); + + return 0; +} + +static struct platform_driver cpld_driver = { + .probe = cpld_probe, + .remove = __exit_p(cpld_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag5648-cpld", + }, +}; + +/*---------------- CPLD - end ------------- */ + +/*---------------- MUX - start ------------- */ + +struct swpld_mux_platform_data { + int parent; + int base_nr; + int reg_addr; + struct i2c_client *cpld; +}; + +struct swpld_mux { + struct i2c_adapter *parent; + struct i2c_adapter **child; + struct swpld_mux_platform_data data; +}; + +static struct swpld_mux_platform_data ag5648_swpld_mux_platform_data[] = { + { + .parent = BUS4, + .base_nr = BUS4_BASE_NUM, + .cpld = NULL, + .reg_addr = BUS4_MUX_REG , + }, +}; + + +static struct platform_device ag5648_swpld_mux[] = { + { + .name = "delta-ag5648-swpld-mux", + .id = 0, + .dev = { + .platform_data = &ag5648_swpld_mux_platform_data[0], + .release = device_release, + }, + }, +}; + + +static int cpld_reg_write_byte(struct i2c_client *client, u8 regaddr, u8 val) +{ + union i2c_smbus_data data; + + data.byte = val; + return client->adapter->algo->smbus_xfer(client->adapter, client->addr, + client->flags, + I2C_SMBUS_WRITE, + regaddr, I2C_SMBUS_BYTE_DATA, &data); +} + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +static int swpld_mux_select(struct i2c_adapter *adap, void *data, u8 chan) +{ + struct swpld_mux *mux = data; + u8 swpld_mux_val=0; + if ( mux->data.base_nr == BUS4_BASE_NUM ) + { + swpld_mux_val = (chan + 0x01); + } + else + { + swpld_mux_val = 0x00; + } + swpld_mux_val=swpld_mux_val & (u8)0x3F; + + return cpld_reg_write_byte(mux->data.cpld, mux->data.reg_addr, (u8)(swpld_mux_val & 0xff)); +} +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int swpld_mux_select(struct i2c_mux_core *muxc, u32 chan) +{ + struct swpld_mux *mux = i2c_mux_priv(muxc); + u8 swpld_mux_val=0; + if ( mux->data.base_nr == BUS4_BASE_NUM ) + { + swpld_mux_val = (chan + 0x01); + } + else + { + swpld_mux_val = 0x00; + } + swpld_mux_val=swpld_mux_val & (u8)0x3F; + + return cpld_reg_write_byte(mux->data.cpld, mux->data.reg_addr, (u8)(swpld_mux_val & 0xff)); +} +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +static int __init swpld_mux_probe(struct platform_device *pdev) +{ + struct swpld_mux *mux; + struct swpld_mux_platform_data *pdata; + struct i2c_adapter *parent; + int i, ret, dev_num; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "SWPLD platform data not found\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", pdata->parent); + return -ENODEV; + } + + /* Judge bus number to decide how many devices*/ + switch (pdata->parent) { + case BUS4: + dev_num = BUS4_DEV_NUM; + break; + default : + dev_num = DEFAULT_NUM; + break; + } + + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) { + ret = -ENOMEM; + printk(KERN_ERR "Failed to allocate memory for mux\n"); + goto alloc_failed; + } + + mux->parent = parent; + mux->data = *pdata; + mux->child = kzalloc(sizeof(struct i2c_adapter *) * dev_num, GFP_KERNEL); + if (!mux->child) { + ret = -ENOMEM; + printk(KERN_ERR "Failed to allocate memory for device on mux\n"); + goto alloc_failed2; + } + + for (i = 0; i < dev_num; i++) { + int nr = pdata->base_nr + i; + unsigned int class = 0; + + mux->child[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, + nr, i, class, + swpld_mux_select, NULL); + if (!mux->child[i]) { + ret = -ENODEV; + dev_err(&pdev->dev, "Failed to add adapter %d\n", i); + goto add_adapter_failed; + } + } + + platform_set_drvdata(pdev, mux); + return 0; + +add_adapter_failed: + for (; i > 0; i--) + i2c_del_mux_adapter(mux->child[i - 1]); + kfree(mux->child); +alloc_failed2: + kfree(mux); +alloc_failed: + i2c_put_adapter(parent); + + return ret; +} +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int __init swpld_mux_probe(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc; + struct swpld_mux *mux; + struct swpld_mux_platform_data *pdata; + struct i2c_adapter *parent; + int i, ret, dev_num; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "SWPLD platform data not found\n"); + return -ENODEV; + } + + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) { + printk(KERN_ERR "Failed to allocate memory for mux\n"); + return -ENOMEM; + } + mux->data = *pdata; + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + kfree(mux); + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", pdata->parent); + return -ENODEV; + } + + /* Judge bus number to decide how many devices*/ + switch (pdata->parent) { + case BUS4: + dev_num = BUS4_DEV_NUM; + break; + default : + dev_num = DEFAULT_NUM; + break; + } + + muxc = i2c_mux_alloc(parent, &pdev->dev, dev_num, 0, 0, + swpld_mux_select, NULL); + if (!muxc) { + ret = -ENOMEM; + goto alloc_failed; + } + muxc->priv = mux; + platform_set_drvdata(pdev, muxc); + + + for (i = 0; i < dev_num; i++) { + int nr = pdata->base_nr + i; + unsigned int class = 0; + + ret = i2c_mux_add_adapter(muxc, nr, i, class); + if (ret) { + dev_err(&pdev->dev, "Failed to add adapter %d\n", i); + goto add_adapter_failed; + } + } + + dev_info(&pdev->dev, "%d port mux on %s adapter\n", dev_num, parent->name); + + return 0; + +add_adapter_failed: + i2c_mux_del_adapters(muxc); +alloc_failed: + kfree(mux); + i2c_put_adapter(parent); + + return ret; +} +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +static int __exit swpld_mux_remove(struct platform_device *pdev) +{ + int i; + struct swpld_mux *mux = platform_get_drvdata(pdev); + struct swpld_mux_platform_data *pdata; + struct i2c_adapter *parent; + int dev_num; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "SWPLD platform data not found\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", + pdata->parent); + return -ENODEV; + } + switch (pdata->parent) { + case BUS4: + dev_num = BUS4_DEV_NUM; + break; + default : + dev_num = DEFAULT_NUM; + break; + } + + for (i = 0; i < dev_num; i++) + i2c_del_mux_adapter(mux->child[i]); + + platform_set_drvdata(pdev, NULL); + i2c_put_adapter(mux->parent); + kfree(mux->child); + kfree(mux); + + return 0; +} +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int __exit swpld_mux_remove(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc = platform_get_drvdata(pdev); + + i2c_mux_del_adapters(muxc); + i2c_put_adapter(muxc->parent); + + return 0; +} +#endif + +static struct platform_driver swpld_mux_driver = { + .probe = swpld_mux_probe, + .remove = __exit_p(swpld_mux_remove), /* TODO */ + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag5648-swpld-mux", + }, +}; +/*---------------- MUX - end ------------- */ + + +/*---------------- module initialization ------------- */ +static int __init delta_ag5648_platform_init(void) +{ + //struct i2c_client *client; + struct i2c_adapter *adapter; + struct cpld_platform_data *cpld_pdata; + struct swpld_mux_platform_data *swpld_pdata; + int ret,i = 0; + + //Use pca9548 in i2c_mux_pca954x.c + adapter = i2c_get_adapter(BUS1); + + i2c_client_9548 = i2c_new_device(adapter, &i2c_info_pca9548[0]); + i2c_put_adapter(adapter); + + // set the CPLD prob and remove + ret = platform_driver_register(&cpld_driver); + if (ret) { + printk(KERN_WARNING "Fail to register cpld driver\n"); + goto error_cpld_driver; + } + + // register the mux prob which call the CPLD + ret = platform_driver_register(&swpld_mux_driver); + if (ret) { + printk(KERN_WARNING "Fail to register swpld mux driver\n"); + goto error_swpld_mux_driver; + } + + // register the i2c devices + ret = platform_driver_register(&i2c_device_driver); + if (ret) { + printk(KERN_WARNING "Fail to register i2c device driver\n"); + goto error_i2c_device_driver; + } + + // register the CPLD + ret = platform_device_register(&ag5648_cpld); + if (ret) { + printk(KERN_WARNING "Fail to create cpld device\n"); + goto error_ag5648_cpld; + } + // link the CPLD and the Mux + cpld_pdata = ag5648_cpld.dev.platform_data; + + + swpld_pdata = ag5648_swpld_mux[0].dev.platform_data; + swpld_pdata->cpld = cpld_pdata[master_cpld].client; + ret = platform_device_register(&ag5648_swpld_mux[0]); + if (ret) { + printk(KERN_WARNING "Fail to create swpld mux %d\n", i); + goto error_ag5648_swpld_mux; + } + + for (i = 0; i < ARRAY_SIZE(ag5648_i2c_device); i++) + { + ret = platform_device_register(&ag5648_i2c_device[i]); + if (ret) { + printk(KERN_WARNING "Fail to create i2c device %d\n", i); + goto error_ag5648_i2c_device; + } + } + + if (ret) + goto error_ag5648_swpld_mux; + return 0; + +error_ag5648_i2c_device: + i--; + for (; i >= 0; i--) { + platform_device_unregister(&ag5648_i2c_device[i]); + } + i = ARRAY_SIZE(ag5648_swpld_mux); +error_ag5648_swpld_mux: + i--; + for (; i >= 0; i--) { + platform_device_unregister(&ag5648_swpld_mux[0]); + } + platform_device_unregister(&ag5648_cpld); +error_ag5648_cpld: + platform_driver_unregister(&i2c_device_driver); +error_i2c_device_driver: + platform_driver_unregister(&swpld_mux_driver); +error_swpld_mux_driver: + platform_driver_unregister(&cpld_driver); +error_cpld_driver: + return ret; +} + +static void __exit delta_ag5648_platform_exit(void) +{ + int i = 0; + + for ( i = 0; i < ARRAY_SIZE(ag5648_i2c_device); i++ ) { + platform_device_unregister(&ag5648_i2c_device[i]); + } + + for (i = 0; i < ARRAY_SIZE(ag5648_swpld_mux); i++) { + platform_device_unregister(&ag5648_swpld_mux[i]); + } + + platform_device_unregister(&ag5648_cpld); + platform_driver_unregister(&i2c_device_driver); + platform_driver_unregister(&cpld_driver); + platform_driver_unregister(&swpld_mux_driver); + i2c_unregister_device(i2c_client_9548); +} + +module_init(delta_ag5648_platform_init); +module_exit(delta_ag5648_platform_exit); + +MODULE_DESCRIPTION("DNI ag5648 Platform Support"); +MODULE_AUTHOR("Neal Tai "); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/rules b/platform/broadcom/sonic-platform-modules-delta/debian/rules index 58a3597e7a44..d0398ecaca17 100755 --- a/platform/broadcom/sonic-platform-modules-delta/debian/rules +++ b/platform/broadcom/sonic-platform-modules-delta/debian/rules @@ -5,7 +5,7 @@ export INSTALL_MOD_DIR:=extra KVERSION ?= $(shell uname -r) KERNEL_SRC := /lib/modules/$(KVERSION) MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= ag9032v1 +MODULE_DIRS:= ag9032v1 ag9064 ag5648 %: dh $@ --with=systemd From c77ddbc79e98281daf6d6773c6058356a245da69 Mon Sep 17 00:00:00 2001 From: hans-tseng Date: Sat, 14 Apr 2018 13:49:35 +0800 Subject: [PATCH 101/180] [devices]: modified and fixed delta ag9064 modules (#28) 2. enable build ag9064 Signed-off-by: neal tai --- .../ag9064/modules/Makefile | 3 +- .../ag9064/modules/delta_ag9064_common.h | 1132 +++---- .../ag9064/modules/delta_ag9064_cpld.c | 1722 +++++----- .../ag9064/modules/delta_ag9064_platform.c | 2993 +++++++---------- .../ag9064/modules/delta_ag9064_swpld.c | 1243 +++---- 5 files changed, 3230 insertions(+), 3863 deletions(-) diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/Makefile b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/Makefile index 124e0ff5b820..5642e82fa058 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/Makefile +++ b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/Makefile @@ -2,5 +2,4 @@ obj-m += delta_ag9064_platform.o obj-m += delta_ag9064_cpld.o obj-m += delta_ag9064_swpld.o obj-m += i2c-mei.o -i2c-mei-objs := i2c-mei_io.o i2c-mei_main.o i2c-mei_rw.o - +i2c-mei-objs := i2c-mei_io.o i2c-mei_main.o i2c-mei_rw.o \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_common.h b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_common.h index f30081a8829e..5be2eb91fedf 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_common.h +++ b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_common.h @@ -1,567 +1,567 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define IPMI_MAX_INTF (4) -#define DELTA_NETFN 0x38 -#define BMC_BUS_5 0x04 -#define CMD_SETDATA 0x03 -#define CMD_GETDATA 0x02 - -#define CPUPLD_ADDR 0x31 -#define SWPLD1_ADDR 0x35 -#define SWPLD2_ADDR 0x34 -#define SWPLD3_ADDR 0x33 -#define SWPLD4_ADDR 0x32 -#define QSFP_PORT_MUX_REG 0x13 - -#define DEFAULT_NUM 1 -#define BUS9_DEV_NUM 64 -#define BUS9_BASE_NUM 20 - -extern int dni_bmc_cmd(char set_cmd, char *cmd_data, int cmd_data_len); -extern int dni_create_user(void); -extern unsigned char dni_log2 (unsigned char num); - -extern void device_release(struct device *dev); -extern void msg_handler(struct ipmi_recv_msg *recv_msg,void* handler_data); -extern void dummy_smi_free(struct ipmi_smi_msg *msg); -extern void dummy_recv_free(struct ipmi_recv_msg *msg); - -static ipmi_user_t ipmi_mh_user = NULL; -static struct ipmi_user_hndl ipmi_hndlrs = { .ipmi_recv_hndl = msg_handler,}; -static atomic_t dummy_count = ATOMIC_INIT(0); - -static struct ipmi_smi_msg halt_smi_msg = { - .done = dummy_smi_free -}; -static struct ipmi_recv_msg halt_recv_msg = { - .done = dummy_recv_free -}; - -enum{ - BUS0 = 0, - BUS1, - BUS2, - BUS3, - BUS4, - BUS5, - BUS6, - BUS7, - BUS8, - BUS9, - BUS10, - BUS11, - BUS12, - BUS13, - BUS14, -}; - -static struct cpld_attribute_data { - uint8_t bus; - uint8_t addr; - uint8_t reg; - uint8_t mask; - char note[200]; -}; - - -enum cpld_type { - system_cpld, - swpld1, - swpld2, - swpld3, - swpld4, -}; - -struct cpld_platform_data { - int reg_addr; - struct i2c_client *client; -}; - -static struct cpld_platform_data ag9064_cpld_platform_data[] = { - [system_cpld] = { - .reg_addr = CPUPLD_ADDR, - }, -}; - -static struct cpld_platform_data ag9064_swpld1_platform_data[] = { - [swpld1] = { - .reg_addr = SWPLD1_ADDR, - }, -}; - -static struct cpld_platform_data ag9064_swpld2_platform_data[] = { - [swpld2] = { - .reg_addr = SWPLD2_ADDR, - }, -}; - -static struct cpld_platform_data ag9064_swpld3_platform_data[] = { - [swpld3] = { - .reg_addr = SWPLD3_ADDR, - }, -}; - -static struct cpld_platform_data ag9064_swpld4_platform_data[] = { - [swpld4] = { - .reg_addr = SWPLD4_ADDR, - }, -}; - -enum cpld_attributes { - CPLD_REG_ADDR, - CPLD_REG_VALUE, - SWPLD1_REG_ADDR, - SWPLD1_REG_VALUE, - SWPLD2_REG_ADDR, - SWPLD2_REG_VALUE, - SWPLD3_REG_ADDR, - SWPLD3_REG_VALUE, - SWPLD4_REG_ADDR, - SWPLD4_REG_VALUE, - //CPLD - CPLD_VER, - CPU_BOARD_VER, - CPU_ID, - MB_ID, - MB_VER, - CPU0_PWR_OK, - PSU_OVER_TEMP, - PWR_RAIL_OVER_TEMP, - CPU_DISOMIC_OVER_TEMP, - DDR_OVER_TEMP, - CPLD_PWR_ON_RST, - CPLD_HARD_RST, - CPLD_RST, - MB_PWR, - MB_RST, - PSU_FAN_INT, - OP_MODULE_INT, -//SWPLD1 - SWPLD1_MAJOR_VER, - SWPLD1_MINOR_VER, - SWPLD1_SCRTCH_REG, - PSU1_PWR_OK, - PSU1_INT, - PSU2_PWR_OK, - PSU2_INT, - SYNCE_INT, - SYNCE_RST, - SYNCE_EEPROM_WP, - PSU1_GREEN_LED, - PSU1_RED_LED, - PSU2_GREEN_LED, - PSU2_RED_LED, - PSU_LED_MODE, -//SWPLD2 - SWPLD2_MAJOR_VER, - SWPLD2_MINOR_VER, - SWPLD2_SCRTCH_REG, - FAN_LED, - SYS_LED, - FAN_MOD1_LED, - FAN_MOD2_LED, - FAN_MOD3_LED, - FAN_MOD4_LED, -//SWPLD3 - SWPLD3_MAJOR_VER, - SWPLD3_MINOR_VER, - SWPLD3_SCRTCH_REG, - SB_VER, - PLATFORM_TYPE, -//SWPLD4 - SWPLD4_MAJOR_VER, - SWPLD4_MINOR_VER, - SWPLD4_SCRTCH_REG, - BMC_RST, - CPLD_LPC_RST, - CPLD_SW_RST, - MB_CPLD_RST, - BCM56970_RST, - CPLD_UPGRADE_RST, - MB_RST_CPLD, - CPU_RST_MB_OOB, - GPIO_PHY_RST, - PSU_FAN_EVENT, - CPU_THERMAL_INT, - FAN_INT, - CPLD_SPI_WP, - RJ45_CONSOLE_SEL, - SYSTEM_INT, - CPLD_MB_RST_DONE, - MB_PWR_OK, - FAN_EEPROM_WP, -}; - -static struct cpld_attribute_data attribute_data[] = { - [CPLD_REG_ADDR] = { - }, - [CPLD_REG_VALUE] = { - }, - [SWPLD1_REG_ADDR] = { - }, - [SWPLD1_REG_VALUE] = { - }, - [SWPLD2_REG_ADDR] = { - }, - [SWPLD2_REG_VALUE] = { - }, - [SWPLD3_REG_ADDR] = { - }, - [SWPLD3_REG_VALUE] = { - }, - [SWPLD4_REG_ADDR] = { - }, - [SWPLD4_REG_VALUE] = { - }, -//CPLD - [CPLD_VER] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x01, .mask = 0xFF, - .note = "CPLD Version, controlled by CPLD editor" - }, - [CPU_BOARD_VER] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x02, .mask = 0xF0, - .note = "“0x0”: proto A1\n“0x1”: proto A2\n“0x2”: PR (Production)" - }, - [CPU_ID] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x02, .mask = 0x0F, - .note = "“0x0”: C2558 ECC\n“0x1”: Rangeley ECC\n“0x2”: BROADWELL-DE ECC" - }, - [MB_ID] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x03, .mask = 0xFF, - .note = "“0x00”: proto A1\n“0x01”: proto A2\n“0x02”: PR (Production)" - }, - [MB_VER] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x04, .mask = 0x0F, - .note = "“0x0”: proto-A\n“0x1”: proto-B" - }, - [CPU0_PWR_OK] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x08, .mask = 1 << 3, - .note = "“1” =Power rail is good\n“0” = Power rail is failed" - }, - [PSU_OVER_TEMP] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x0b, .mask = 1 << 4, - .note = "“1” = Not over temperature\n“0” = Over temperature" - }, - [PWR_RAIL_OVER_TEMP] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x0b, .mask = 1 << 3, - .note = "“1” = Not over temperature\n“0” = Over temperature" - }, - [CPU_DISOMIC_OVER_TEMP] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x0b, .mask = 1 << 1, - .note = "“1” = Not over temperature\n“0” = Over temperature" - }, - [DDR_OVER_TEMP] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x0b, .mask = 1 << 0, - .note = "“1” = Not over temperature\n“0” = Over temperature" - }, - [CPLD_PWR_ON_RST] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x11, .mask = 1 << 4, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [CPLD_HARD_RST] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x11, .mask = 1 << 2, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [CPLD_RST] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x11, .mask = 1 << 0, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [MB_PWR] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x12, .mask = 1 << 2, - .note = "“0” = Power rail is failed\n“1” =Power rail is good" - }, - [MB_RST] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x12, .mask = 1 << 0, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [PSU_FAN_INT] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x15, .mask = 1 << 1, - .note = "“0” = Interrupt occurs\n“1” = Interrupt doesn't occur" - }, - [OP_MODULE_INT] = { - .bus = BUS0, .addr = CPUPLD_ADDR, - .reg = 0x15, .mask = 1 << 0, - .note = "“0” = Interrupt occurs\n“1” = Interrupt doesn't occur" - }, -//SWPLD1 - [SWPLD1_MAJOR_VER] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x00, .mask = 0xF0, - .note = "CPLD Major Version, controlled by CPLD editor." - }, - [SWPLD1_MINOR_VER] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x00, .mask = 0x0F, - .note = "CPLD Minor Version, controlled by CPLD editor." - }, - [SWPLD1_SCRTCH_REG] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x01, .mask = 0xFF, - .note = "CPLD read/write test register, to provide a way to test CPLD access." - }, - [PSU1_PWR_OK] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x02, .mask = 1 << 6, - .note = "‘0’ = Power rail is good\n‘1’ = Power rail is failed" - }, - [PSU1_INT] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x02, .mask = 1 << 5, - .note = "‘0’ = Interrupt doesn’t occur\n‘1’ = Interrupt occurs" - }, - [PSU2_PWR_OK] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x02, .mask = 1 << 2, - .note = "‘0’ = Power rail is good\n‘1’ = Power rail is failed" - }, - [PSU2_INT] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x02, .mask = 1 << 1, - .note = "‘0’ = Interrupt doesn’t occur\n‘1’ = Interrupt occurs" - }, - [SYNCE_INT] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x12, .mask = 1 << 7, - .note = "‘0’ = Interrupt occurs\n‘1’ = Interrupt doesn’t occur" - }, - [SYNCE_RST] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x12, .mask = 1 << 6, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [SYNCE_EEPROM_WP] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x12, .mask = 1 << 5, - .note = "“1” = enables the lock-down mechanism.\n“0” = overrides the lock-down function enabling blocks to be erased or programmed using software commands." - }, - [PSU1_GREEN_LED] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x13, .mask = 1 << 7, - .note = "“0”: Solid Green – Power Supply 1 is supplied to the switch & operating normally\n“1”: OFF" - }, - [PSU1_RED_LED] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x13, .mask = 1 << 6, - .note = "“0”: Solid Red – Power Supply 1 is supplied to the switch & operating normally\n“1”: OFF" - }, - [PSU2_GREEN_LED] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x13, .mask = 1 << 5, - .note = "“0”: Solid Green – Power Supply 2 is supplied to the switch & operating normally\n“1”: OFF" - }, - [PSU2_RED_LED] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x13, .mask = 1 << 4, - .note = "“0”: Solid Red – Power Supply 1=2 is supplied to the switch & operating normally\n“1”: OFF" - }, - [PSU_LED_MODE] = { - .bus = BUS0, .addr = SWPLD1_ADDR, - .reg = 0x13, .mask = 1 << 0, - .note = "“0”: PSU LED can be changed manually\n“1”: PSU LED can’t be changed manually" - }, -//SWPLD2 - [SWPLD2_MAJOR_VER] = { - .bus = BUS0, .addr = SWPLD2_ADDR, - .reg = 0x00, .mask =0xF0 , - .note = "CPLD Major Version, controlled by CPLD editor." - }, - [SWPLD2_MINOR_VER] = { - .bus = BUS0, .addr = SWPLD2_ADDR, - .reg = 0x00, .mask = 0x0F, - .note = "CPLD Minor Version, controlled by CPLD editor." - }, - [SWPLD2_SCRTCH_REG] = { - .bus = BUS0, .addr = SWPLD2_ADDR, - .reg = 0x01, .mask = 0xFF, - .note = "CPLD read/write test register, to provide a way to test CPLD access." - }, - [FAN_LED] = { - .bus = BUS0, .addr = SWPLD2_ADDR, - .reg = 0x02, .mask = 0xC0, - .note = "“00’/”11”: OFF\n“01”: Solid Green – FANs are operating normally\n“10”: Solid Amber – FANs are Error" - }, - [SYS_LED] = { - .bus = BUS0, .addr = SWPLD2_ADDR, - .reg = 0x02, .mask = 0x30, - .note = "‘00’: Off\n‘01’: Solid Green – Normal operation\n‘10’: Blinking Green – Booting Progress\n‘11’: Solid Red – System Fail" - }, - [FAN_MOD1_LED] = { - .bus = BUS0, .addr = SWPLD2_ADDR, - .reg = 0x1b, .mask = 1 << 7, - .note = "‘0’ = Amber\n‘1’ = Green" - }, - [FAN_MOD2_LED] = { - .bus = BUS0, .addr = SWPLD2_ADDR, - .reg = 0x1b, .mask = 1 << 6, - .note = "‘0’ = Amber\n‘1’ = Green" - }, - [FAN_MOD3_LED] = { - .bus = BUS0, .addr = SWPLD2_ADDR, - .reg = 0x1b, .mask = 1 << 5, - .note = "‘0’ = Amber\n‘1’ = Green" - }, - [FAN_MOD4_LED] = { - .bus = BUS0, .addr = SWPLD2_ADDR, - .reg = 0x1b, .mask = 1 << 4, - .note = "‘0’ = Amber\n‘1’ = Green" - }, -//SWPLD3 - [SWPLD3_MAJOR_VER] = { - .bus = BUS0, .addr = SWPLD3_ADDR, - .reg = 0x00, .mask = 0xF0, - .note = "CPLD Major Version, controlled by CPLD editor." - }, - [SWPLD3_MINOR_VER] = { - .bus = BUS0, .addr = SWPLD3_ADDR, - .reg = 0x00, .mask = 0x0F, - .note = "CPLD Minor Version, controlled by CPLD editor." - }, - [SWPLD3_SCRTCH_REG] = { - .bus = BUS0, .addr = SWPLD3_ADDR, - .reg = 0x01, .mask = 0xFF, - .note = "CPLD read/write test register, to provide a way to test CPLD access." - }, - [SB_VER] = { - .bus = BUS0, .addr = SWPLD3_ADDR, - .reg = 0x02, .mask = 0xF0, - .note = "“0x0”: proto-A\n“0x1”: proto-B" - }, - [PLATFORM_TYPE] = { - .bus = BUS0, .addr = SWPLD3_ADDR, - .reg = 0x02, .mask = 0x0F, - .note = "“0x0”: 64X100G_2U\n“0x1”~”0xF” Reserved" - }, -//SWPLD4 - [SWPLD4_MAJOR_VER] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x00, .mask = 0xF0, - .note = "CPLD Major Version, controlled by CPLD editor." - }, - [SWPLD4_MINOR_VER] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x00, .mask = 0x0F, - .note = "CPLD Minor Version, controlled by CPLD editor." - }, - [SWPLD4_SCRTCH_REG] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x01, .mask = 0xFF, - .note = "CPLD read/write test register, to provide a way to test CPLD access." - }, - [BMC_RST] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x02, .mask = 1 << 6, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [CPLD_LPC_RST] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x02, .mask = 1 << 5, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [CPLD_SW_RST] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x02, .mask = 1 << 3, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [MB_CPLD_RST] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x02, .mask = 1 << 2, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [BCM56970_RST] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x02, .mask = 1 << 1, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [CPLD_UPGRADE_RST] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x03, .mask = 1 << 7, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [MB_RST_CPLD] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x03, .mask = 1 << 6, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [CPU_RST_MB_OOB] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x03, .mask = 1 << 5, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [GPIO_PHY_RST] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x03, .mask = 1 << 4, - .note = "“0” = Reset\n“1” = Normal operation" - }, - [PSU_FAN_EVENT] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x04, .mask = 1 << 4, - .note = "‘0’ = Interrupt occurs\n‘1’ = Interrupt doesn’t occur" - }, - [CPU_THERMAL_INT] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x04, .mask = 1 << 1, - .note = "‘0’ = Interrupt occurs\n‘1’ = Interrupt doesn’t occur" - }, - [FAN_INT] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x04, .mask = 1 << 0, - .note = "‘0’ = Interrupt occurs\n‘1’ = Interrupt doesn’t occur" - }, - [CPLD_SPI_WP] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x06, .mask = 1 << 3, - .note = "“0” = SPI write operation is disabled\n“1” = SPI write operation is enabled" - }, - [RJ45_CONSOLE_SEL] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x06, .mask = 1 << 2, - .note = "“0” = Use BCM UART\n“1” = Use CPU UART" - }, - [SYSTEM_INT] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x07, .mask = 1 << 2, - .note = "“0” = Interrupt is asserted\n“1” = Interrupt is deasserted" - }, - [CPLD_MB_RST_DONE] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x07, .mask = 1 << 1, - .note = "“0” = Is done\n“1” = Is not done" - }, - [MB_PWR_OK] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x07, .mask = 1 << 0, - .note = "‘0’ = Power is failed\n‘1’ = Power is good" - }, - [FAN_EEPROM_WP] = { - .bus = BUS0, .addr = SWPLD4_ADDR, - .reg = 0x15, .mask = 1 << 2, - .note = "“1” = enables the lock-down mechanism.\n“0” = overrides the lock-down function enabling blocks to be erased or programmed using software commands." - }, +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define IPMI_MAX_INTF (4) +#define DELTA_NETFN 0x38 +#define BMC_BUS_5 0x04 +#define CMD_SETDATA 0x03 +#define CMD_GETDATA 0x02 + +#define CPUPLD_ADDR 0x31 +#define SWPLD1_ADDR 0x35 +#define SWPLD2_ADDR 0x34 +#define SWPLD3_ADDR 0x33 +#define SWPLD4_ADDR 0x32 +#define QSFP_PORT_MUX_REG 0x13 + +#define DEFAULT_NUM 1 +#define BUS9_DEV_NUM 64 +#define BUS9_BASE_NUM 20 + +extern int dni_bmc_cmd(char set_cmd, char *cmd_data, int cmd_data_len); +extern int dni_create_user(void); +extern unsigned char dni_log2 (unsigned char num); + +extern void device_release(struct device *dev); +extern void msg_handler(struct ipmi_recv_msg *recv_msg,void* handler_data); +extern void dummy_smi_free(struct ipmi_smi_msg *msg); +extern void dummy_recv_free(struct ipmi_recv_msg *msg); + +static ipmi_user_t ipmi_mh_user = NULL; +static struct ipmi_user_hndl ipmi_hndlrs = { .ipmi_recv_hndl = msg_handler,}; +static atomic_t dummy_count = ATOMIC_INIT(0); + +static struct ipmi_smi_msg halt_smi_msg = { + .done = dummy_smi_free +}; +static struct ipmi_recv_msg halt_recv_msg = { + .done = dummy_recv_free +}; + +enum{ + BUS0 = 0, + BUS1, + BUS2, + BUS3, + BUS4, + BUS5, + BUS6, + BUS7, + BUS8, + BUS9, + BUS10, + BUS11, + BUS12, + BUS13, + BUS14, +}; + +static struct cpld_attribute_data { + uint8_t bus; + uint8_t addr; + uint8_t reg; + uint8_t mask; + char note[200]; +}; + + +enum cpld_type { + system_cpld, + swpld1, + swpld2, + swpld3, + swpld4, +}; + +struct cpld_platform_data { + int reg_addr; + struct i2c_client *client; +}; + +static struct cpld_platform_data ag9064_cpld_platform_data[] = { + [system_cpld] = { + .reg_addr = CPUPLD_ADDR, + }, +}; + +static struct cpld_platform_data ag9064_swpld1_platform_data[] = { + [swpld1] = { + .reg_addr = SWPLD1_ADDR, + }, +}; + +static struct cpld_platform_data ag9064_swpld2_platform_data[] = { + [swpld2] = { + .reg_addr = SWPLD2_ADDR, + }, +}; + +static struct cpld_platform_data ag9064_swpld3_platform_data[] = { + [swpld3] = { + .reg_addr = SWPLD3_ADDR, + }, +}; + +static struct cpld_platform_data ag9064_swpld4_platform_data[] = { + [swpld4] = { + .reg_addr = SWPLD4_ADDR, + }, +}; + +enum cpld_attributes { + CPLD_REG_ADDR, + CPLD_REG_VALUE, + SWPLD1_REG_ADDR, + SWPLD1_REG_VALUE, + SWPLD2_REG_ADDR, + SWPLD2_REG_VALUE, + SWPLD3_REG_ADDR, + SWPLD3_REG_VALUE, + SWPLD4_REG_ADDR, + SWPLD4_REG_VALUE, + //CPLD + CPLD_VER, + CPU_BOARD_VER, + CPU_ID, + MB_ID, + MB_VER, + CPU0_PWR_OK, + PSU_OVER_TEMP, + PWR_RAIL_OVER_TEMP, + CPU_DISOMIC_OVER_TEMP, + DDR_OVER_TEMP, + CPLD_PWR_ON_RST, + CPLD_HARD_RST, + CPLD_RST, + MB_PWR, + MB_RST, + PSU_FAN_INT, + OP_MODULE_INT, +//SWPLD1 + SWPLD1_MAJOR_VER, + SWPLD1_MINOR_VER, + SWPLD1_SCRTCH_REG, + PSU1_PWR_OK, + PSU1_INT, + PSU2_PWR_OK, + PSU2_INT, + SYNCE_INT, + SYNCE_RST, + SYNCE_EEPROM_WP, + PSU1_GREEN_LED, + PSU1_RED_LED, + PSU2_GREEN_LED, + PSU2_RED_LED, + PSU_LED_MODE, +//SWPLD2 + SWPLD2_MAJOR_VER, + SWPLD2_MINOR_VER, + SWPLD2_SCRTCH_REG, + FAN_LED, + SYS_LED, + FAN_MOD1_LED, + FAN_MOD2_LED, + FAN_MOD3_LED, + FAN_MOD4_LED, +//SWPLD3 + SWPLD3_MAJOR_VER, + SWPLD3_MINOR_VER, + SWPLD3_SCRTCH_REG, + SB_VER, + PLATFORM_TYPE, +//SWPLD4 + SWPLD4_MAJOR_VER, + SWPLD4_MINOR_VER, + SWPLD4_SCRTCH_REG, + BMC_RST, + CPLD_LPC_RST, + CPLD_SW_RST, + MB_CPLD_RST, + BCM56970_RST, + CPLD_UPGRADE_RST, + MB_RST_CPLD, + CPU_RST_MB_OOB, + GPIO_PHY_RST, + PSU_FAN_EVENT, + CPU_THERMAL_INT, + FAN_INT, + CPLD_SPI_WP, + RJ45_CONSOLE_SEL, + SYSTEM_INT, + CPLD_MB_RST_DONE, + MB_PWR_OK, + FAN_EEPROM_WP, +}; + +static struct cpld_attribute_data attribute_data[] = { + [CPLD_REG_ADDR] = { + }, + [CPLD_REG_VALUE] = { + }, + [SWPLD1_REG_ADDR] = { + }, + [SWPLD1_REG_VALUE] = { + }, + [SWPLD2_REG_ADDR] = { + }, + [SWPLD2_REG_VALUE] = { + }, + [SWPLD3_REG_ADDR] = { + }, + [SWPLD3_REG_VALUE] = { + }, + [SWPLD4_REG_ADDR] = { + }, + [SWPLD4_REG_VALUE] = { + }, +//CPLD + [CPLD_VER] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x01, .mask = 0xFF, + .note = "CPLD Version, controlled by CPLD editor" + }, + [CPU_BOARD_VER] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x02, .mask = 0xF0, + .note = "“0x0”: proto A1\n“0x1”: proto A2\n“0x2”: PR (Production)" + }, + [CPU_ID] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x02, .mask = 0x0F, + .note = "“0x0”: C2558 ECC\n“0x1”: Rangeley ECC\n“0x2”: BROADWELL-DE ECC" + }, + [MB_ID] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x03, .mask = 0xFF, + .note = "“0x00”: proto A1\n“0x01”: proto A2\n“0x02”: PR (Production)" + }, + [MB_VER] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x04, .mask = 0x0F, + .note = "“0x0”: proto-A\n“0x1”: proto-B" + }, + [CPU0_PWR_OK] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x08, .mask = 1 << 3, + .note = "“1” =Power rail is good\n“0” = Power rail is failed" + }, + [PSU_OVER_TEMP] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x0b, .mask = 1 << 4, + .note = "“1” = Not over temperature\n“0” = Over temperature" + }, + [PWR_RAIL_OVER_TEMP] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x0b, .mask = 1 << 3, + .note = "“1” = Not over temperature\n“0” = Over temperature" + }, + [CPU_DISOMIC_OVER_TEMP] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x0b, .mask = 1 << 1, + .note = "“1” = Not over temperature\n“0” = Over temperature" + }, + [DDR_OVER_TEMP] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x0b, .mask = 1 << 0, + .note = "“1” = Not over temperature\n“0” = Over temperature" + }, + [CPLD_PWR_ON_RST] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x11, .mask = 1 << 4, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [CPLD_HARD_RST] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x11, .mask = 1 << 2, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [CPLD_RST] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x11, .mask = 1 << 0, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [MB_PWR] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x12, .mask = 1 << 2, + .note = "“0” = Power rail is failed\n“1” =Power rail is good" + }, + [MB_RST] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x12, .mask = 1 << 0, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [PSU_FAN_INT] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x15, .mask = 1 << 1, + .note = "“0” = Interrupt occurs\n“1” = Interrupt doesn't occur" + }, + [OP_MODULE_INT] = { + .bus = BUS0, .addr = CPUPLD_ADDR, + .reg = 0x15, .mask = 1 << 0, + .note = "“0” = Interrupt occurs\n“1” = Interrupt doesn't occur" + }, +//SWPLD1 + [SWPLD1_MAJOR_VER] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x00, .mask = 0xF0, + .note = "CPLD Major Version, controlled by CPLD editor." + }, + [SWPLD1_MINOR_VER] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x00, .mask = 0x0F, + .note = "CPLD Minor Version, controlled by CPLD editor." + }, + [SWPLD1_SCRTCH_REG] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x01, .mask = 0xFF, + .note = "CPLD read/write test register, to provide a way to test CPLD access." + }, + [PSU1_PWR_OK] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x02, .mask = 1 << 6, + .note = "‘0’ = Power rail is good\n‘1’ = Power rail is failed" + }, + [PSU1_INT] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x02, .mask = 1 << 5, + .note = "‘0’ = Interrupt doesn’t occur\n‘1’ = Interrupt occurs" + }, + [PSU2_PWR_OK] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x02, .mask = 1 << 2, + .note = "‘0’ = Power rail is good\n‘1’ = Power rail is failed" + }, + [PSU2_INT] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x02, .mask = 1 << 1, + .note = "‘0’ = Interrupt doesn’t occur\n‘1’ = Interrupt occurs" + }, + [SYNCE_INT] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x12, .mask = 1 << 7, + .note = "‘0’ = Interrupt occurs\n‘1’ = Interrupt doesn’t occur" + }, + [SYNCE_RST] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x12, .mask = 1 << 6, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [SYNCE_EEPROM_WP] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x12, .mask = 1 << 5, + .note = "“1” = enables the lock-down mechanism.\n“0” = overrides the lock-down function enabling blocks to be erased or programmed using software commands." + }, + [PSU1_GREEN_LED] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x13, .mask = 1 << 7, + .note = "“0”: Solid Green – Power Supply 1 is supplied to the switch & operating normally\n“1”: OFF" + }, + [PSU1_RED_LED] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x13, .mask = 1 << 6, + .note = "“0”: Solid Red – Power Supply 1 is supplied to the switch & operating normally\n“1”: OFF" + }, + [PSU2_GREEN_LED] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x13, .mask = 1 << 5, + .note = "“0”: Solid Green – Power Supply 2 is supplied to the switch & operating normally\n“1”: OFF" + }, + [PSU2_RED_LED] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x13, .mask = 1 << 4, + .note = "“0”: Solid Red – Power Supply 1=2 is supplied to the switch & operating normally\n“1”: OFF" + }, + [PSU_LED_MODE] = { + .bus = BUS0, .addr = SWPLD1_ADDR, + .reg = 0x13, .mask = 1 << 0, + .note = "“0”: PSU LED can be changed manually\n“1”: PSU LED can’t be changed manually" + }, +//SWPLD2 + [SWPLD2_MAJOR_VER] = { + .bus = BUS0, .addr = SWPLD2_ADDR, + .reg = 0x00, .mask =0xF0 , + .note = "CPLD Major Version, controlled by CPLD editor." + }, + [SWPLD2_MINOR_VER] = { + .bus = BUS0, .addr = SWPLD2_ADDR, + .reg = 0x00, .mask = 0x0F, + .note = "CPLD Minor Version, controlled by CPLD editor." + }, + [SWPLD2_SCRTCH_REG] = { + .bus = BUS0, .addr = SWPLD2_ADDR, + .reg = 0x01, .mask = 0xFF, + .note = "CPLD read/write test register, to provide a way to test CPLD access." + }, + [FAN_LED] = { + .bus = BUS0, .addr = SWPLD2_ADDR, + .reg = 0x02, .mask = 0xC0, + .note = "“00’/”11”: OFF\n“01”: Solid Green – FANs are operating normally\n“10”: Solid Amber – FANs are Error" + }, + [SYS_LED] = { + .bus = BUS0, .addr = SWPLD2_ADDR, + .reg = 0x02, .mask = 0x30, + .note = "‘00’: Off\n‘01’: Solid Green – Normal operation\n‘10’: Blinking Green – Booting Progress\n‘11’: Solid Red – System Fail" + }, + [FAN_MOD1_LED] = { + .bus = BUS0, .addr = SWPLD2_ADDR, + .reg = 0x1b, .mask = 1 << 7, + .note = "‘0’ = Amber\n‘1’ = Green" + }, + [FAN_MOD2_LED] = { + .bus = BUS0, .addr = SWPLD2_ADDR, + .reg = 0x1b, .mask = 1 << 6, + .note = "‘0’ = Amber\n‘1’ = Green" + }, + [FAN_MOD3_LED] = { + .bus = BUS0, .addr = SWPLD2_ADDR, + .reg = 0x1b, .mask = 1 << 5, + .note = "‘0’ = Amber\n‘1’ = Green" + }, + [FAN_MOD4_LED] = { + .bus = BUS0, .addr = SWPLD2_ADDR, + .reg = 0x1b, .mask = 1 << 4, + .note = "‘0’ = Amber\n‘1’ = Green" + }, +//SWPLD3 + [SWPLD3_MAJOR_VER] = { + .bus = BUS0, .addr = SWPLD3_ADDR, + .reg = 0x00, .mask = 0xF0, + .note = "CPLD Major Version, controlled by CPLD editor." + }, + [SWPLD3_MINOR_VER] = { + .bus = BUS0, .addr = SWPLD3_ADDR, + .reg = 0x00, .mask = 0x0F, + .note = "CPLD Minor Version, controlled by CPLD editor." + }, + [SWPLD3_SCRTCH_REG] = { + .bus = BUS0, .addr = SWPLD3_ADDR, + .reg = 0x01, .mask = 0xFF, + .note = "CPLD read/write test register, to provide a way to test CPLD access." + }, + [SB_VER] = { + .bus = BUS0, .addr = SWPLD3_ADDR, + .reg = 0x02, .mask = 0xF0, + .note = "“0x0”: proto-A\n“0x1”: proto-B" + }, + [PLATFORM_TYPE] = { + .bus = BUS0, .addr = SWPLD3_ADDR, + .reg = 0x02, .mask = 0x0F, + .note = "“0x0”: 64X100G_2U\n“0x1”~”0xF” Reserved" + }, +//SWPLD4 + [SWPLD4_MAJOR_VER] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x00, .mask = 0xF0, + .note = "CPLD Major Version, controlled by CPLD editor." + }, + [SWPLD4_MINOR_VER] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x00, .mask = 0x0F, + .note = "CPLD Minor Version, controlled by CPLD editor." + }, + [SWPLD4_SCRTCH_REG] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x01, .mask = 0xFF, + .note = "CPLD read/write test register, to provide a way to test CPLD access." + }, + [BMC_RST] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x02, .mask = 1 << 6, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [CPLD_LPC_RST] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x02, .mask = 1 << 5, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [CPLD_SW_RST] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x02, .mask = 1 << 3, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [MB_CPLD_RST] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x02, .mask = 1 << 2, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [BCM56970_RST] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x02, .mask = 1 << 1, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [CPLD_UPGRADE_RST] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x03, .mask = 1 << 7, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [MB_RST_CPLD] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x03, .mask = 1 << 6, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [CPU_RST_MB_OOB] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x03, .mask = 1 << 5, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [GPIO_PHY_RST] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x03, .mask = 1 << 4, + .note = "“0” = Reset\n“1” = Normal operation" + }, + [PSU_FAN_EVENT] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x04, .mask = 1 << 4, + .note = "‘0’ = Interrupt occurs\n‘1’ = Interrupt doesn’t occur" + }, + [CPU_THERMAL_INT] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x04, .mask = 1 << 1, + .note = "‘0’ = Interrupt occurs\n‘1’ = Interrupt doesn’t occur" + }, + [FAN_INT] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x04, .mask = 1 << 0, + .note = "‘0’ = Interrupt occurs\n‘1’ = Interrupt doesn’t occur" + }, + [CPLD_SPI_WP] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x06, .mask = 1 << 3, + .note = "“0” = SPI write operation is disabled\n“1” = SPI write operation is enabled" + }, + [RJ45_CONSOLE_SEL] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x06, .mask = 1 << 2, + .note = "“0” = Use BCM UART\n“1” = Use CPU UART" + }, + [SYSTEM_INT] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x07, .mask = 1 << 2, + .note = "“0” = Interrupt is asserted\n“1” = Interrupt is deasserted" + }, + [CPLD_MB_RST_DONE] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x07, .mask = 1 << 1, + .note = "“0” = Is done\n“1” = Is not done" + }, + [MB_PWR_OK] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x07, .mask = 1 << 0, + .note = "‘0’ = Power is failed\n‘1’ = Power is good" + }, + [FAN_EEPROM_WP] = { + .bus = BUS0, .addr = SWPLD4_ADDR, + .reg = 0x15, .mask = 1 << 2, + .note = "“1” = enables the lock-down mechanism.\n“0” = overrides the lock-down function enabling blocks to be erased or programmed using software commands." + }, }; \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_cpld.c b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_cpld.c index 0db05d967ccf..97e1b640010b 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_cpld.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_cpld.c @@ -1,860 +1,862 @@ -#include "delta_ag9064_common.h" - -#define QSFP_PRESENCE_1 0x03 -#define QSFP_PRESENCE_2 0x03 -#define QSFP_PRESENCE_3 0x24 -#define QSFP_PRESENCE_4 0x24 -#define QSFP_PRESENCE_5 0x04 -#define QSFP_PRESENCE_6 0x04 -#define QSFP_PRESENCE_7 0x25 -#define QSFP_PRESENCE_8 0x25 - -#define QSFP_LP_MODE_1 0x0c -#define QSFP_LP_MODE_2 0x0c -#define QSFP_LP_MODE_3 0x2a -#define QSFP_LP_MODE_4 0x2a -#define QSFP_LP_MODE_5 0x0d -#define QSFP_LP_MODE_6 0x0d -#define QSFP_LP_MODE_7 0x2b -#define QSFP_LP_MODE_8 0x2b - -#define QSFP_RESET_1 0x06 -#define QSFP_RESET_2 0x06 -#define QSFP_RESET_3 0x26 -#define QSFP_RESET_4 0x26 -#define QSFP_RESET_5 0x07 -#define QSFP_RESET_6 0x07 -#define QSFP_RESET_7 0x27 -#define QSFP_RESET_8 0x27 - -#define QSFP_RESPONSE_1 0x09 -#define QSFP_RESPONSE_2 0x09 -#define QSFP_RESPONSE_3 0x28 -#define QSFP_RESPONSE_4 0x28 -#define QSFP_RESPONSE_5 0x0a -#define QSFP_RESPONSE_6 0x0a -#define QSFP_RESPONSE_7 0x29 -#define QSFP_RESPONSE_8 0x29 - -#define QSFP_INTERRUPT_1 0x0f -#define QSFP_INTERRUPT_2 0x0f -#define QSFP_INTERRUPT_3 0x2c -#define QSFP_INTERRUPT_4 0x2c -#define QSFP_INTERRUPT_5 0x10 -#define QSFP_INTERRUPT_6 0x10 -#define QSFP_INTERRUPT_7 0x2d -#define QSFP_INTERRUPT_8 0x2d - -unsigned char cpupld_reg_addr; -/*---------------- CPLD - start ------------- */ -/* CPLD -- device */ -static struct platform_device ag9064_cpld = { - .name = "delta-ag9064-cpld", - .id = 0, - .dev = { - .platform_data = ag9064_cpld_platform_data, - .release = device_release - }, -}; - -static ssize_t get_present(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - int ret; - u64 data = 0; - uint8_t cmd_data[4]={0}; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_PRESENCE_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_PRESENCE_2; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_PRESENCE_3; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_PRESENCE_4; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_PRESENCE_5; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_PRESENCE_6; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_PRESENCE_7; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_PRESENCE_8; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - -static ssize_t get_lpmode(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - int ret; - u64 data = 0; - uint8_t cmd_data[4]={0}; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_LP_MODE_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_LP_MODE_2; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_LP_MODE_3; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_LP_MODE_4; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_LP_MODE_5; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_LP_MODE_6; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_LP_MODE_7; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_LP_MODE_8; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - -static ssize_t get_reset(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - int ret; - u64 data = 0; - uint8_t cmd_data[4]={0}; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESET_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESET_2; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESET_3; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESET_4; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESET_5; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESET_6; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESET_7; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESET_8; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - -static ssize_t get_response(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - int ret; - u64 data = 0; - uint8_t cmd_data[4]={0}; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESPONSE_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESPONSE_2; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESPONSE_3; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESPONSE_4; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESPONSE_5; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESPONSE_6; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESPONSE_7; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESPONSE_8; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - -static ssize_t get_interrupt(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - int ret; - u64 data = 0; - uint8_t cmd_data[4]={0}; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_INTERRUPT_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_INTERRUPT_2; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_INTERRUPT_3; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_INTERRUPT_4; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_INTERRUPT_5; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_INTERRUPT_6; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_INTERRUPT_7; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_INTERRUPT_8; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - -static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - unsigned long long set_data; - int err; - - err = kstrtoull(buf, 16, &set_data); - if (err){ - return err; - } - uint8_t cmd_data[4]={0}; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_SETDATA; - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_LP_MODE_1; - cmd_data[3] = (set_data & 0xff); - cmd_data_len = sizeof(cmd_data); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_LP_MODE_2; - cmd_data[3] = ((set_data >> 8 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_LP_MODE_3; - cmd_data[3] = ((set_data >> 16 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_LP_MODE_4; - cmd_data[3] = ((set_data >> 24 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_LP_MODE_5; - cmd_data[3] = ((set_data >> 32 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_LP_MODE_6; - cmd_data[3] = ((set_data >> 40 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_LP_MODE_7; - cmd_data[3] = ((set_data >> 48 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_LP_MODE_8; - cmd_data[3] = ((set_data >> 56 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - return count; -} - -static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - unsigned long long set_data; - int err; - - err = kstrtoull(buf, 16, &set_data); - if (err){ - return err; - } - uint8_t cmd_data[4]={0}; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_SETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESET_1; - cmd_data[3] = (set_data & 0xff); - cmd_data_len = sizeof(cmd_data); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESET_2; - cmd_data[3] = ((set_data >> 8 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESET_3; - cmd_data[3] = ((set_data >> 16 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESET_4; - cmd_data[3] = ((set_data >> 24 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESET_5; - cmd_data[3] = ((set_data >> 32 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESET_6; - cmd_data[3] = ((set_data >> 40 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESET_7; - cmd_data[3] = ((set_data >> 48 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESET_8; - cmd_data[3] = ((set_data >> 56 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - return count; -} - -static ssize_t set_response(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - unsigned long long set_data; - int err; - - err = kstrtoull(buf, 16, &set_data); - if (err){ - return err; - } - uint8_t cmd_data[4]={0}; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_SETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESPONSE_1; - cmd_data[3] = (set_data & 0xff); - cmd_data_len = sizeof(cmd_data); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESPONSE_2; - cmd_data[3] = ((set_data >> 8 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESPONSE_3; - cmd_data[3] = ((set_data >> 16 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESPONSE_4; - cmd_data[3] = ((set_data >> 24 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESPONSE_5; - cmd_data[3] = ((set_data >> 32 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESPONSE_6; - cmd_data[3] = ((set_data >> 40 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESPONSE_7; - cmd_data[3] = ((set_data >> 48 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESPONSE_8; - cmd_data[3] = ((set_data >> 56 ) & 0xff); - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - - return count; -} - -static ssize_t get_cpld_reg(struct device *dev, struct device_attribute *dev_attr, char *buf) -{ - int ret; - int mask; - int value; - char note[200]; - unsigned char reg; - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); - struct cpld_platform_data *pdata = dev->platform_data; - - switch (attr->index) { - case CPLD_REG_ADDR: - return sprintf(buf, "0x%02x\n", cpupld_reg_addr); - case CPLD_REG_VALUE: - ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, cpupld_reg_addr); - return sprintf(buf, "0x%02x\n", ret); - case CPLD_VER ... OP_MODULE_INT: - reg = attribute_data[attr->index].reg; - mask = attribute_data[attr->index].mask; - value = i2c_smbus_read_byte_data(pdata[system_cpld].client, reg); - sprintf(note, "\n%s\n",attribute_data[attr->index].note); - value = (value & mask); - break; - default: - return sprintf(buf, "%d not found", attr->index); - } - - switch (mask) { - case 0xFF: - return sprintf(buf, "0x%02x%s", value, note); - case 0x0F: - return sprintf(buf, "0x%01x%s", value, note); - case 0xF0: - value = value >> 4; - return sprintf(buf, "0x%01x%s", value, note); - default : - value = value >> dni_log2(mask); - return sprintf(buf, "%d%s", value, note); - } -} - -static ssize_t set_cpld_reg(struct device *dev, struct device_attribute *dev_attr, - const char *buf, size_t count) -{ - int err; - int value; - int set_data; - unsigned char reg; - unsigned char mask; - unsigned char mask_out; - - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); - struct cpld_platform_data *pdata = dev->platform_data; - - err = kstrtoul(buf, 0, &set_data); - if (err){ - return err; - } - - if (set_data > 0xff){ - printk(KERN_ALERT "address out of range (0x00-0xFF)\n"); - return count; - } - - switch (attr->index) { - case CPLD_REG_ADDR: - cpupld_reg_addr = set_data; - return count; - case CPLD_REG_VALUE: - i2c_smbus_write_byte_data(pdata[system_cpld].client, cpupld_reg_addr, set_data); - return count; - case CPLD_VER ... OP_MODULE_INT: - reg = attribute_data[attr->index].reg; - mask = attribute_data[attr->index].mask; - value = i2c_smbus_read_byte_data(pdata[system_cpld].client, reg); - mask_out = value & ~(mask); - break; - default: - return sprintf(buf, "%d not found", attr->index); - } - - switch (mask) { - case 0xFF: - set_data = mask_out | (set_data & mask); - break; - case 0x0F: - set_data = mask_out | (set_data & mask); - break; - case 0xF0: - set_data = set_data << 4; - set_data = mask_out | (set_data & mask); - break; - default : - set_data = mask_out | (set_data << dni_log2(mask) ); - } - - i2c_smbus_write_byte_data(pdata[system_cpld].client, reg, set_data); - return count; -} - -static DEVICE_ATTR(qsfp_present, S_IRUGO, get_present, NULL); -static DEVICE_ATTR(qsfp_lpmode, S_IWUSR | S_IRUGO, get_lpmode, set_lpmode); -static DEVICE_ATTR(qsfp_reset, S_IWUSR | S_IRUGO, get_reset, set_reset); -static DEVICE_ATTR(qsfp_modsel, S_IWUSR | S_IRUGO, get_response, set_response); -static DEVICE_ATTR(qsfp_interrupt, S_IRUGO, get_interrupt, NULL); - -static SENSOR_DEVICE_ATTR(cpld_reg_addr, S_IRUGO | S_IWUSR, get_cpld_reg, set_cpld_reg, CPLD_REG_ADDR); -static SENSOR_DEVICE_ATTR(cpld_reg_value, S_IRUGO | S_IWUSR, get_cpld_reg, set_cpld_reg, CPLD_REG_VALUE); -static SENSOR_DEVICE_ATTR(cpld_ver, S_IRUGO, get_cpld_reg, NULL, CPLD_VER); -static SENSOR_DEVICE_ATTR(cpu_board_ver, S_IRUGO, get_cpld_reg, NULL, CPU_BOARD_VER); -static SENSOR_DEVICE_ATTR(cpu_id, S_IRUGO, get_cpld_reg, NULL, CPU_ID); -static SENSOR_DEVICE_ATTR(mb_id, S_IRUGO, get_cpld_reg, NULL, MB_ID); -static SENSOR_DEVICE_ATTR(mb_ver, S_IRUGO, get_cpld_reg, NULL, MB_VER); -static SENSOR_DEVICE_ATTR(cpu0_pwr_ok, S_IRUGO, get_cpld_reg, NULL, CPU0_PWR_OK); -static SENSOR_DEVICE_ATTR(psu_over_temp, S_IRUGO, get_cpld_reg, NULL, PSU_OVER_TEMP); -static SENSOR_DEVICE_ATTR(pwr_rail_over_temp, S_IRUGO, get_cpld_reg, NULL, PWR_RAIL_OVER_TEMP); -static SENSOR_DEVICE_ATTR(cpu_disomic_over_temp, S_IRUGO, get_cpld_reg, NULL, CPU_DISOMIC_OVER_TEMP); -static SENSOR_DEVICE_ATTR(ddr_over_temp, S_IRUGO, get_cpld_reg, NULL, DDR_OVER_TEMP); -static SENSOR_DEVICE_ATTR(cpld_pwr_on_rst, S_IRUGO, get_cpld_reg, NULL, CPLD_PWR_ON_RST); -static SENSOR_DEVICE_ATTR(cpld_hard_rst, S_IRUGO, get_cpld_reg, NULL, CPLD_HARD_RST); -static SENSOR_DEVICE_ATTR(cpld_rst, S_IRUGO | S_IWUSR, get_cpld_reg, set_cpld_reg, CPLD_RST); -static SENSOR_DEVICE_ATTR(mb_pwr, S_IRUGO, get_cpld_reg, NULL, MB_PWR); -static SENSOR_DEVICE_ATTR(mb_rst, S_IRUGO | S_IWUSR, get_cpld_reg, set_cpld_reg, MB_RST); -static SENSOR_DEVICE_ATTR(psu_fan_int, S_IRUGO, get_cpld_reg, NULL, PSU_FAN_INT); -static SENSOR_DEVICE_ATTR(op_module_int, S_IRUGO, get_cpld_reg, NULL, OP_MODULE_INT); - -static struct attribute *ag9064_cpld_attrs[] = { - &dev_attr_qsfp_present.attr, - &dev_attr_qsfp_lpmode.attr, - &dev_attr_qsfp_reset.attr, - &dev_attr_qsfp_modsel.attr, - &dev_attr_qsfp_interrupt.attr, - &sensor_dev_attr_cpld_reg_value.dev_attr.attr, - &sensor_dev_attr_cpld_reg_addr.dev_attr.attr, - &sensor_dev_attr_cpld_ver.dev_attr.attr, - &sensor_dev_attr_cpu_board_ver.dev_attr.attr, - &sensor_dev_attr_cpu_id.dev_attr.attr, - &sensor_dev_attr_mb_id.dev_attr.attr, - &sensor_dev_attr_mb_ver.dev_attr.attr, - &sensor_dev_attr_cpu0_pwr_ok.dev_attr.attr, - &sensor_dev_attr_psu_over_temp.dev_attr.attr, - &sensor_dev_attr_pwr_rail_over_temp.dev_attr.attr, - &sensor_dev_attr_cpu_disomic_over_temp.dev_attr.attr, - &sensor_dev_attr_ddr_over_temp.dev_attr.attr, - &sensor_dev_attr_cpld_pwr_on_rst.dev_attr.attr, - &sensor_dev_attr_cpld_hard_rst.dev_attr.attr, - &sensor_dev_attr_cpld_rst.dev_attr.attr, - &sensor_dev_attr_mb_pwr.dev_attr.attr, - &sensor_dev_attr_mb_rst.dev_attr.attr, - &sensor_dev_attr_psu_fan_int.dev_attr.attr, - &sensor_dev_attr_op_module_int.dev_attr.attr, - NULL, -}; - -static struct attribute_group ag9064_cpld_attr_grp = { - .attrs = ag9064_cpld_attrs, -}; - -static int __init cpld_probe(struct platform_device *pdev) -{ - struct cpld_platform_data *pdata; - struct i2c_adapter *parent; - int ret; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "CPLD platform data not found\n"); - return -ENODEV; - } - - parent = i2c_get_adapter(BUS7); - if (!parent) { - printk(KERN_WARNING "Parent adapter (%d) not found\n",BUS7); - return -ENODEV; - } - - pdata[system_cpld].client = i2c_new_dummy(parent, pdata[system_cpld].reg_addr); - if (!pdata[system_cpld].client) { - printk(KERN_WARNING "Fail to create dummy i2c client for addr %d\n", pdata[system_cpld].reg_addr); - goto error; - } - - ret = sysfs_create_group(&pdev->dev.kobj, &ag9064_cpld_attr_grp); - if (ret) { - printk(KERN_WARNING "Fail to create cpld attribute group"); - goto error; - } - - return 0; - -error: - i2c_unregister_device(pdata[system_cpld].client); - i2c_put_adapter(parent); - - return -ENODEV; -} - -static int __exit cpld_remove(struct platform_device *pdev) -{ - struct i2c_adapter *parent = NULL; - struct cpld_platform_data *pdata = pdev->dev.platform_data; - sysfs_remove_group(&pdev->dev.kobj, &ag9064_cpld_attr_grp); - - if (!pdata) { - dev_err(&pdev->dev, "Missing platform data\n"); - } - else { - if (pdata[system_cpld].client) { - if (!parent) { - parent = (pdata[system_cpld].client)->adapter; - } - i2c_unregister_device(pdata[system_cpld].client); - } - } - i2c_put_adapter(parent); - - return 0; -} - -static struct platform_driver cpld_driver = { - .probe = cpld_probe, - .remove = __exit_p(cpld_remove), - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag9064-cpld", - }, -}; - -/*---------------- CPLD - end ------------- */ - -/*---------------- module initialization ------------- */ -static void __init delta_ag9064_cpupld_init(void) -{ - int ret; - printk(KERN_WARNING "ag9064_platform_cpupld module initialization\n"); - - ret = dni_create_user(); - if (ret != 0){ - printk(KERN_WARNING "Fail to create IPMI user\n"); - } - - // set the CPUPLD prob and remove - ret = platform_driver_register(&cpld_driver); - if (ret) { - printk(KERN_WARNING "Fail to register cpupld driver\n"); - goto error_cpupld_driver; - } - - // register the CPUPLD - ret = platform_device_register(&ag9064_cpld); - if (ret) { - printk(KERN_WARNING "Fail to create cpupld device\n"); - goto error_ag9064_cpupld; - } - return 0; - -error_ag9064_cpupld: - platform_driver_unregister(&cpld_driver); -error_cpupld_driver: - return ret; -} - -static void __exit delta_ag9064_cpupld_exit(void) -{ - platform_device_unregister(&ag9064_cpld); - platform_driver_unregister(&cpld_driver); -} -module_init(delta_ag9064_cpupld_init); -module_exit(delta_ag9064_cpupld_exit); - -MODULE_DESCRIPTION("DNI ag9064 CPLD Platform Support"); -MODULE_AUTHOR("Stanley Chi "); -MODULE_LICENSE("GPL"); \ No newline at end of file +#include "delta_ag9064_common.h" + +#define QSFP_PRESENCE_1 0x03 +#define QSFP_PRESENCE_2 0x03 +#define QSFP_PRESENCE_3 0x24 +#define QSFP_PRESENCE_4 0x24 +#define QSFP_PRESENCE_5 0x04 +#define QSFP_PRESENCE_6 0x04 +#define QSFP_PRESENCE_7 0x25 +#define QSFP_PRESENCE_8 0x25 + +#define QSFP_LP_MODE_1 0x0c +#define QSFP_LP_MODE_2 0x0c +#define QSFP_LP_MODE_3 0x2a +#define QSFP_LP_MODE_4 0x2a +#define QSFP_LP_MODE_5 0x0d +#define QSFP_LP_MODE_6 0x0d +#define QSFP_LP_MODE_7 0x2b +#define QSFP_LP_MODE_8 0x2b + +#define QSFP_RESET_1 0x06 +#define QSFP_RESET_2 0x06 +#define QSFP_RESET_3 0x26 +#define QSFP_RESET_4 0x26 +#define QSFP_RESET_5 0x07 +#define QSFP_RESET_6 0x07 +#define QSFP_RESET_7 0x27 +#define QSFP_RESET_8 0x27 + +#define QSFP_RESPONSE_1 0x09 +#define QSFP_RESPONSE_2 0x09 +#define QSFP_RESPONSE_3 0x28 +#define QSFP_RESPONSE_4 0x28 +#define QSFP_RESPONSE_5 0x0a +#define QSFP_RESPONSE_6 0x0a +#define QSFP_RESPONSE_7 0x29 +#define QSFP_RESPONSE_8 0x29 + +#define QSFP_INTERRUPT_1 0x0f +#define QSFP_INTERRUPT_2 0x0f +#define QSFP_INTERRUPT_3 0x2c +#define QSFP_INTERRUPT_4 0x2c +#define QSFP_INTERRUPT_5 0x10 +#define QSFP_INTERRUPT_6 0x10 +#define QSFP_INTERRUPT_7 0x2d +#define QSFP_INTERRUPT_8 0x2d + +unsigned char cpupld_reg_addr; +/*---------------- CPLD - start ------------- */ +/* CPLD -- device */ +static struct platform_device ag9064_cpld = { + .name = "delta-ag9064-cpld", + .id = 0, + .dev = { + .platform_data = ag9064_cpld_platform_data, + .release = device_release + }, +}; + +static ssize_t get_present(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + int ret; + u64 data = 0; + uint8_t cmd_data[4]={0}; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_PRESENCE_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_PRESENCE_2; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_PRESENCE_3; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_PRESENCE_4; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_PRESENCE_5; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_PRESENCE_6; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_PRESENCE_7; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_PRESENCE_8; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t get_lpmode(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + int ret; + u64 data = 0; + uint8_t cmd_data[4]={0}; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_LP_MODE_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_LP_MODE_2; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_LP_MODE_3; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_LP_MODE_4; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_LP_MODE_5; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_LP_MODE_6; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_LP_MODE_7; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_LP_MODE_8; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t get_reset(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + int ret; + u64 data = 0; + uint8_t cmd_data[4]={0}; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESET_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESET_2; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESET_3; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESET_4; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESET_5; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESET_6; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESET_7; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESET_8; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t get_response(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + int ret; + u64 data = 0; + uint8_t cmd_data[4]={0}; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESPONSE_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESPONSE_2; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESPONSE_3; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESPONSE_4; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESPONSE_5; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESPONSE_6; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESPONSE_7; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESPONSE_8; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t get_interrupt(struct device *dev, struct device_attribute \ + *dev_attr, char *buf) +{ + int ret; + u64 data = 0; + uint8_t cmd_data[4]={0}; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_GETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_INTERRUPT_1; + cmd_data[3] = 1; + cmd_data_len = sizeof(cmd_data); + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data = (u64)(ret & 0xff); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_INTERRUPT_2; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 8; + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_INTERRUPT_3; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 16; + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_INTERRUPT_4; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 24; + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_INTERRUPT_5; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 32; + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_INTERRUPT_6; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 40; + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_INTERRUPT_7; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 48; + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_INTERRUPT_8; + ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + data |= (u64)(ret & 0xff) << 56; + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long long set_data; + int err; + + err = kstrtoull(buf, 16, &set_data); + if (err){ + return err; + } + uint8_t cmd_data[4]={0}; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_SETDATA; + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_LP_MODE_1; + cmd_data[3] = (set_data & 0xff); + cmd_data_len = sizeof(cmd_data); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_LP_MODE_2; + cmd_data[3] = ((set_data >> 8 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_LP_MODE_3; + cmd_data[3] = ((set_data >> 16 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_LP_MODE_4; + cmd_data[3] = ((set_data >> 24 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_LP_MODE_5; + cmd_data[3] = ((set_data >> 32 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_LP_MODE_6; + cmd_data[3] = ((set_data >> 40 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_LP_MODE_7; + cmd_data[3] = ((set_data >> 48 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_LP_MODE_8; + cmd_data[3] = ((set_data >> 56 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + return count; +} + +static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long long set_data; + int err; + + err = kstrtoull(buf, 16, &set_data); + if (err){ + return err; + } + uint8_t cmd_data[4]={0}; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_SETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESET_1; + cmd_data[3] = (set_data & 0xff); + cmd_data_len = sizeof(cmd_data); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESET_2; + cmd_data[3] = ((set_data >> 8 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESET_3; + cmd_data[3] = ((set_data >> 16 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESET_4; + cmd_data[3] = ((set_data >> 24 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESET_5; + cmd_data[3] = ((set_data >> 32 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESET_6; + cmd_data[3] = ((set_data >> 40 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESET_7; + cmd_data[3] = ((set_data >> 48 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESET_8; + cmd_data[3] = ((set_data >> 56 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + return count; +} + +static ssize_t set_response(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long long set_data; + int err; + + err = kstrtoull(buf, 16, &set_data); + if (err){ + return err; + } + uint8_t cmd_data[4]={0}; + uint8_t set_cmd; + int cmd_data_len; + + set_cmd = CMD_SETDATA; + + /*QSFP1~8*/ + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESPONSE_1; + cmd_data[3] = (set_data & 0xff); + cmd_data_len = sizeof(cmd_data); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP9~16*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESPONSE_2; + cmd_data[3] = ((set_data >> 8 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP17~24*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESPONSE_3; + cmd_data[3] = ((set_data >> 16 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP25~32*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESPONSE_4; + cmd_data[3] = ((set_data >> 24 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP33~40*/ + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = QSFP_RESPONSE_5; + cmd_data[3] = ((set_data >> 32 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP41~48*/ + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_RESPONSE_6; + cmd_data[3] = ((set_data >> 40 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP49~56*/ + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = QSFP_RESPONSE_7; + cmd_data[3] = ((set_data >> 48 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + /*QSFP57~64*/ + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = QSFP_RESPONSE_8; + cmd_data[3] = ((set_data >> 56 ) & 0xff); + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + + return count; +} + +static ssize_t get_cpld_reg(struct device *dev, struct device_attribute *dev_attr, char *buf) +{ + int ret; + int mask; + int value; + char note[200]; + unsigned char reg; + struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct cpld_platform_data *pdata = dev->platform_data; + + switch (attr->index) { + case CPLD_REG_ADDR: + return sprintf(buf, "0x%02x\n", cpupld_reg_addr); + case CPLD_REG_VALUE: + ret = i2c_smbus_read_byte_data(pdata[system_cpld].client, cpupld_reg_addr); + return sprintf(buf, "0x%02x\n", ret); + case CPLD_VER ... OP_MODULE_INT: + reg = attribute_data[attr->index].reg; + mask = attribute_data[attr->index].mask; + value = i2c_smbus_read_byte_data(pdata[system_cpld].client, reg); + sprintf(note, "\n%s\n",attribute_data[attr->index].note); + value = (value & mask); + break; + default: + return sprintf(buf, "%d not found", attr->index); + } + + switch (mask) { + case 0xFF: + return sprintf(buf, "0x%02x%s", value, note); + case 0x0F: + return sprintf(buf, "0x%01x%s", value, note); + case 0xF0: + value = value >> 4; + return sprintf(buf, "0x%01x%s", value, note); + default : + value = value >> dni_log2(mask); + return sprintf(buf, "%d%s", value, note); + } +} + +static ssize_t set_cpld_reg(struct device *dev, struct device_attribute *dev_attr, + const char *buf, size_t count) +{ + int err; + int value; + int set_data; + unsigned long set_data_ul; + unsigned char reg; + unsigned char mask; + unsigned char mask_out; + + struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct cpld_platform_data *pdata = dev->platform_data; + + err = kstrtoul(buf, 0, &set_data_ul); + if (err){ + return err; + } + + set_data = (int)set_data_ul; + if (set_data > 0xff){ + printk(KERN_ALERT "address out of range (0x00-0xFF)\n"); + return count; + } + + switch (attr->index) { + case CPLD_REG_ADDR: + cpupld_reg_addr = set_data; + return count; + case CPLD_REG_VALUE: + i2c_smbus_write_byte_data(pdata[system_cpld].client, cpupld_reg_addr, set_data); + return count; + case CPLD_VER ... OP_MODULE_INT: + reg = attribute_data[attr->index].reg; + mask = attribute_data[attr->index].mask; + value = i2c_smbus_read_byte_data(pdata[system_cpld].client, reg); + mask_out = value & ~(mask); + break; + default: + return sprintf(buf, "%d not found", attr->index); + } + + switch (mask) { + case 0xFF: + set_data = mask_out | (set_data & mask); + break; + case 0x0F: + set_data = mask_out | (set_data & mask); + break; + case 0xF0: + set_data = set_data << 4; + set_data = mask_out | (set_data & mask); + break; + default : + set_data = mask_out | (set_data << dni_log2(mask) ); + } + + i2c_smbus_write_byte_data(pdata[system_cpld].client, reg, set_data); + return count; +} + +static DEVICE_ATTR(qsfp_present, S_IRUGO, get_present, NULL); +static DEVICE_ATTR(qsfp_lpmode, S_IWUSR | S_IRUGO, get_lpmode, set_lpmode); +static DEVICE_ATTR(qsfp_reset, S_IWUSR | S_IRUGO, get_reset, set_reset); +static DEVICE_ATTR(qsfp_modsel, S_IWUSR | S_IRUGO, get_response, set_response); +static DEVICE_ATTR(qsfp_interrupt, S_IRUGO, get_interrupt, NULL); + +static SENSOR_DEVICE_ATTR(cpld_reg_addr, S_IRUGO | S_IWUSR, get_cpld_reg, set_cpld_reg, CPLD_REG_ADDR); +static SENSOR_DEVICE_ATTR(cpld_reg_value, S_IRUGO | S_IWUSR, get_cpld_reg, set_cpld_reg, CPLD_REG_VALUE); +static SENSOR_DEVICE_ATTR(cpld_ver, S_IRUGO, get_cpld_reg, NULL, CPLD_VER); +static SENSOR_DEVICE_ATTR(cpu_board_ver, S_IRUGO, get_cpld_reg, NULL, CPU_BOARD_VER); +static SENSOR_DEVICE_ATTR(cpu_id, S_IRUGO, get_cpld_reg, NULL, CPU_ID); +static SENSOR_DEVICE_ATTR(mb_id, S_IRUGO, get_cpld_reg, NULL, MB_ID); +static SENSOR_DEVICE_ATTR(mb_ver, S_IRUGO, get_cpld_reg, NULL, MB_VER); +static SENSOR_DEVICE_ATTR(cpu0_pwr_ok, S_IRUGO, get_cpld_reg, NULL, CPU0_PWR_OK); +static SENSOR_DEVICE_ATTR(psu_over_temp, S_IRUGO, get_cpld_reg, NULL, PSU_OVER_TEMP); +static SENSOR_DEVICE_ATTR(pwr_rail_over_temp, S_IRUGO, get_cpld_reg, NULL, PWR_RAIL_OVER_TEMP); +static SENSOR_DEVICE_ATTR(cpu_disomic_over_temp, S_IRUGO, get_cpld_reg, NULL, CPU_DISOMIC_OVER_TEMP); +static SENSOR_DEVICE_ATTR(ddr_over_temp, S_IRUGO, get_cpld_reg, NULL, DDR_OVER_TEMP); +static SENSOR_DEVICE_ATTR(cpld_pwr_on_rst, S_IRUGO, get_cpld_reg, NULL, CPLD_PWR_ON_RST); +static SENSOR_DEVICE_ATTR(cpld_hard_rst, S_IRUGO, get_cpld_reg, NULL, CPLD_HARD_RST); +static SENSOR_DEVICE_ATTR(cpld_rst, S_IRUGO | S_IWUSR, get_cpld_reg, set_cpld_reg, CPLD_RST); +static SENSOR_DEVICE_ATTR(mb_pwr, S_IRUGO, get_cpld_reg, NULL, MB_PWR); +static SENSOR_DEVICE_ATTR(mb_rst, S_IRUGO | S_IWUSR, get_cpld_reg, set_cpld_reg, MB_RST); +static SENSOR_DEVICE_ATTR(psu_fan_int, S_IRUGO, get_cpld_reg, NULL, PSU_FAN_INT); +static SENSOR_DEVICE_ATTR(op_module_int, S_IRUGO, get_cpld_reg, NULL, OP_MODULE_INT); + +static struct attribute *ag9064_cpld_attrs[] = { + &dev_attr_qsfp_present.attr, + &dev_attr_qsfp_lpmode.attr, + &dev_attr_qsfp_reset.attr, + &dev_attr_qsfp_modsel.attr, + &dev_attr_qsfp_interrupt.attr, + &sensor_dev_attr_cpld_reg_value.dev_attr.attr, + &sensor_dev_attr_cpld_reg_addr.dev_attr.attr, + &sensor_dev_attr_cpld_ver.dev_attr.attr, + &sensor_dev_attr_cpu_board_ver.dev_attr.attr, + &sensor_dev_attr_cpu_id.dev_attr.attr, + &sensor_dev_attr_mb_id.dev_attr.attr, + &sensor_dev_attr_mb_ver.dev_attr.attr, + &sensor_dev_attr_cpu0_pwr_ok.dev_attr.attr, + &sensor_dev_attr_psu_over_temp.dev_attr.attr, + &sensor_dev_attr_pwr_rail_over_temp.dev_attr.attr, + &sensor_dev_attr_cpu_disomic_over_temp.dev_attr.attr, + &sensor_dev_attr_ddr_over_temp.dev_attr.attr, + &sensor_dev_attr_cpld_pwr_on_rst.dev_attr.attr, + &sensor_dev_attr_cpld_hard_rst.dev_attr.attr, + &sensor_dev_attr_cpld_rst.dev_attr.attr, + &sensor_dev_attr_mb_pwr.dev_attr.attr, + &sensor_dev_attr_mb_rst.dev_attr.attr, + &sensor_dev_attr_psu_fan_int.dev_attr.attr, + &sensor_dev_attr_op_module_int.dev_attr.attr, + NULL, +}; + +static struct attribute_group ag9064_cpld_attr_grp = { + .attrs = ag9064_cpld_attrs, +}; + +static int __init cpld_probe(struct platform_device *pdev) +{ + struct cpld_platform_data *pdata; + struct i2c_adapter *parent; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "CPLD platform data not found\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(BUS7); + if (!parent) { + printk(KERN_WARNING "Parent adapter (%d) not found\n",BUS7); + return -ENODEV; + } + + pdata[system_cpld].client = i2c_new_dummy(parent, pdata[system_cpld].reg_addr); + if (!pdata[system_cpld].client) { + printk(KERN_WARNING "Fail to create dummy i2c client for addr %d\n", pdata[system_cpld].reg_addr); + goto error; + } + + ret = sysfs_create_group(&pdev->dev.kobj, &ag9064_cpld_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create cpld attribute group"); + goto error; + } + + return 0; + +error: + i2c_unregister_device(pdata[system_cpld].client); + i2c_put_adapter(parent); + + return -ENODEV; +} + +static int __exit cpld_remove(struct platform_device *pdev) +{ + struct i2c_adapter *parent = NULL; + struct cpld_platform_data *pdata = pdev->dev.platform_data; + sysfs_remove_group(&pdev->dev.kobj, &ag9064_cpld_attr_grp); + + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + } + else { + if (pdata[system_cpld].client) { + if (!parent) { + parent = (pdata[system_cpld].client)->adapter; + } + i2c_unregister_device(pdata[system_cpld].client); + } + } + i2c_put_adapter(parent); + + return 0; +} + +static struct platform_driver cpld_driver = { + .probe = cpld_probe, + .remove = __exit_p(cpld_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag9064-cpld", + }, +}; + +/*---------------- CPLD - end ------------- */ + +/*---------------- module initialization ------------- */ +static int __init delta_ag9064_cpupld_init(void) +{ + int ret; + printk(KERN_WARNING "ag9064_platform_cpupld module initialization\n"); + + ret = dni_create_user(); + if (ret != 0){ + printk(KERN_WARNING "Fail to create IPMI user\n"); + } + + // set the CPUPLD prob and remove + ret = platform_driver_register(&cpld_driver); + if (ret) { + printk(KERN_WARNING "Fail to register cpupld driver\n"); + goto error_cpupld_driver; + } + + // register the CPUPLD + ret = platform_device_register(&ag9064_cpld); + if (ret) { + printk(KERN_WARNING "Fail to create cpupld device\n"); + goto error_ag9064_cpupld; + } + return 0; + +error_ag9064_cpupld: + platform_driver_unregister(&cpld_driver); +error_cpupld_driver: + return ret; +} + +static void __exit delta_ag9064_cpupld_exit(void) +{ + platform_device_unregister(&ag9064_cpld); + platform_driver_unregister(&cpld_driver); +} +module_init(delta_ag9064_cpupld_init); +module_exit(delta_ag9064_cpupld_exit); + +MODULE_DESCRIPTION("DNI ag9064 CPLD Platform Support"); +MODULE_AUTHOR("Stanley Chi "); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_platform.c b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_platform.c index f4222907d4f2..099d7ea987da 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_platform.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_platform.c @@ -1,1815 +1,1178 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "delta_ag9064_common.h" - -#define SFF8436_INFO(data) \ - .type = "sff8436", .addr = 0x50, .platform_data = (data) - -#define SFF_8346_PORT(eedata) \ - .byte_len = 256, .page_size = 1, .flags = SFF_8436_FLAG_READONLY - -#define ag9064_i2c_device_num(NUM){ \ - .name = "delta-ag9064-i2c-device", \ - .id = NUM, \ - .dev = { \ - .platform_data = &ag9064_i2c_device_platform_data[NUM], \ - .release = device_release, \ - }, \ -} - -struct i2c_client * i2c_client_9548; - -/* pca9548 - add 8 bus */ -static struct pca954x_platform_mode pca954x_mode[] = -{ - { - .adap_id = 7, - .deselect_on_exit = 1, - }, - { - .adap_id = 8, - .deselect_on_exit = 1, - }, - { - .adap_id = 9, - .deselect_on_exit = 1, - }, - { - .adap_id = 10, - .deselect_on_exit = 1, - }, - { - .adap_id = 11, - .deselect_on_exit = 1, - }, - { - .adap_id = 12, - .deselect_on_exit = 1, - }, - { - .adap_id = 13, - .deselect_on_exit = 1, - }, - { - .adap_id = 14, - .deselect_on_exit = 1, - }, -}; - -static struct pca954x_platform_data pca954x_data = -{ - .modes = pca954x_mode, - .num_modes = ARRAY_SIZE(pca954x_mode), -}; - -static struct i2c_board_info __initdata i2c_info_pca9548[] = -{ - { - I2C_BOARD_INFO("pca9548", 0x70), - .platform_data = &pca954x_data, - }, -}; - -static struct sff_8436_platform_data sff_8436_port[] = { - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, - { SFF_8346_PORT() }, -}; - -void device_release(struct device *dev) -{ - return; -} -EXPORT_SYMBOL(device_release); - -void msg_handler(struct ipmi_recv_msg *recv_msg, void* handler_data) -{ - struct completion *comp = recv_msg->user_msg_data; - if (comp) - complete(comp); - else - ipmi_free_recv_msg(recv_msg); - return; -} -EXPORT_SYMBOL(msg_handler); - -void dummy_smi_free(struct ipmi_smi_msg *msg) -{ - atomic_dec(&dummy_count); -} -EXPORT_SYMBOL(dummy_smi_free); - -void dummy_recv_free(struct ipmi_recv_msg *msg) -{ - atomic_dec(&dummy_count); -} -EXPORT_SYMBOL(dummy_recv_free); - -unsigned char dni_log2 (unsigned char num){ - unsigned char num_log2 = 0; - while(num > 0){ - num = num >> 1; - num_log2 += 1; - } - return num_log2 -1; -} -EXPORT_SYMBOL(dni_log2); -/*---------------- IPMI - start ------------- */ -int dni_create_user(void) -{ - int rv, i; - - for (i=0,rv=1; idev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "Missing platform data\n"); - return -ENODEV; - } - - parent = i2c_get_adapter(pdata->parent); - if (!parent) { - dev_err(&pdev->dev, "Parent adapter (%d) not found\n", - pdata->parent); - return -ENODEV; - } - - pdata->client = i2c_new_device(parent, &pdata->info); - if (!pdata->client) { - dev_err(&pdev->dev, "Failed to create i2c client %s at %d\n", - pdata->info.type, pdata->parent); - return -ENODEV; - } - - return 0; - -} - -static int __exit i2c_deivce_remove(struct platform_device *pdev) -{ - struct i2c_adapter *parent; - struct i2c_device_platform_data *pdata; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "Missing platform data\n"); - return -ENODEV; - } - - if (pdata->client) { - parent = (pdata->client)->adapter; - i2c_unregister_device(pdata->client); - i2c_put_adapter(parent); - } - - return 0; -} -static struct platform_driver i2c_device_driver = { - .probe = i2c_device_probe, - .remove = __exit_p(i2c_deivce_remove), - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag9064-i2c-device", - } -}; - -/*---------------- I2C driver - end ------------- */ - -/*---------------- MUX - start ------------- */ - -struct swpld_mux_platform_data { - int parent; - int base_nr; -// struct i2c_client *cpld; -}; - -struct swpld_mux { - struct i2c_adapter *parent; - struct i2c_adapter **child; - struct swpld_mux_platform_data data; -}; - -static struct swpld_mux_platform_data ag9064_swpld_mux_platform_data[] = { - { - .parent = BUS9, - .base_nr = BUS9_BASE_NUM, -// .cpld = NULL, - }, -}; - -static struct platform_device ag9064_swpld_mux[] = -{ - { - .name = "delta-ag9064-swpld-mux", - .id = 0, - .dev = { - .platform_data = &ag9064_swpld_mux_platform_data[0], - .release = device_release, - }, - }, -}; -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) -static int swpld_mux_select(struct i2c_adapter *adap, void *data, u8 chan) -{ - uint8_t cmd_data[4]={0}; - struct swpld_mux *mux = data; - uint8_t set_cmd; - int cmd_data_len; - - if ( mux->data.base_nr == BUS9_BASE_NUM ) - { - set_cmd = CMD_SETDATA; - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_PORT_MUX_REG; - cmd_data[3] = chan + 1; - cmd_data_len = sizeof(cmd_data); - // return 0; - return dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - } - else - { - printk(KERN_ERR "Swpld mux QSFP select port error\n"); - return 0; - } -} -#else -static int swpld_mux_select(struct i2c_mux_core *muxc, u32 chan) -{ - uint8_t cmd_data[4]={0}; - struct swpld_mux *mux = i2c_mux_priv(muxc); - uint8_t set_cmd; - int cmd_data_len; - - if ( mux->data.base_nr == BUS9_BASE_NUM ) - { - set_cmd = CMD_SETDATA; - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_PORT_MUX_REG; - cmd_data[3] = chan + 1; - cmd_data_len = sizeof(cmd_data); - return dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - return 0; - } - else - { - printk(KERN_ERR "Swpld mux QSFP select port error\n"); - return 0; - } - -} -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) -static int __init swpld_mux_probe(struct platform_device *pdev) -{ - struct swpld_mux *mux; - struct swpld_mux_platform_data *pdata; - struct i2c_adapter *parent; - int i, ret, dev_num; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "SWPLD platform data not found\n"); - return -ENODEV; - } - - parent = i2c_get_adapter(pdata->parent); - if (!parent) { - dev_err(&pdev->dev, "Parent adapter (%d) not found\n", pdata->parent); - return -ENODEV; - } - /* Judge bus number to decide how many devices*/ - switch (pdata->parent) { - case BUS9: - dev_num = BUS9_DEV_NUM; - break; - default : - dev_num = DEFAULT_NUM; - break; - } - - mux = kzalloc(sizeof(*mux), GFP_KERNEL); - if (!mux) { - ret = -ENOMEM; - printk(KERN_ERR "Failed to allocate memory for mux\n"); - goto alloc_failed; - } - - mux->parent = parent; - mux->data = *pdata; - mux->child = kzalloc(sizeof(struct i2c_adapter *) * dev_num, GFP_KERNEL); - if (!mux->child) { - ret = -ENOMEM; - printk(KERN_ERR "Failed to allocate memory for device on mux\n"); - goto alloc_failed2; - } - - for (i = 0; i < dev_num; i++) - { - int nr = pdata->base_nr + i; - unsigned int class = 0; - - mux->child[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, - nr, i, class, - swpld_mux_select, NULL); - if (!mux->child[i]) - { - ret = -ENODEV; - dev_err(&pdev->dev, "Failed to add adapter %d\n", i); - goto add_adapter_failed; - } - } - - platform_set_drvdata(pdev, mux); - return 0; - -add_adapter_failed: - for (; i > 0; i--) - i2c_del_mux_adapter(mux->child[i - 1]); - kfree(mux->child); -alloc_failed2: - kfree(mux); -alloc_failed: - i2c_put_adapter(parent); - - return ret; -} -#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) -static int __init swpld_mux_probe(struct platform_device *pdev) -{ - struct i2c_mux_core *muxc; - struct swpld_mux *mux; - struct swpld_mux_platform_data *pdata; - struct i2c_adapter *parent; - int i, ret, dev_num; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "SWPLD platform data not found\n"); - return -ENODEV; - } - mux = kzalloc(sizeof(*mux), GFP_KERNEL); - if (!mux) { - printk(KERN_ERR "Failed to allocate memory for mux\n"); - return -ENOMEM; - } - mux->data = *pdata; - - parent = i2c_get_adapter(pdata->parent); - if (!parent) { - kfree(mux); - dev_err(&pdev->dev, "Parent adapter (%d) not found\n", pdata->parent); - return -ENODEV; - } - /* Judge bus number to decide how many devices*/ - switch (pdata->parent) { - case BUS9: - dev_num = BUS9_DEV_NUM; - break; - default : - dev_num = DEFAULT_NUM; - break; - } - - muxc = i2c_mux_alloc(parent, &pdev->dev, dev_num, 0, 0,swpld_mux_select, NULL); - if (!muxc) { - ret = -ENOMEM; - goto alloc_failed; - } - muxc->priv = mux; - platform_set_drvdata(pdev, muxc); - - for (i = 0; i < dev_num; i++) - { - int nr = pdata->base_nr + i; - unsigned int class = 0; - ret = i2c_mux_add_adapter(muxc, nr, i, class); - if (ret) { - dev_err(&pdev->dev, "Failed to add adapter %d\n", i); - goto add_adapter_failed; - } - } - dev_info(&pdev->dev, "%d port mux on %s adapter\n", dev_num, parent->name); - return 0; - -add_adapter_failed: - i2c_mux_del_adapters(muxc); -alloc_failed2: - kfree(mux); -alloc_failed: - i2c_put_adapter(parent); - - return ret; -} -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) -static int __exit swpld_mux_remove(struct platform_device *pdev) -{ - int i; - struct swpld_mux *mux = platform_get_drvdata(pdev); - struct swpld_mux_platform_data *pdata; - struct i2c_adapter *parent; - int dev_num; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "SWPLD platform data not found\n"); - return -ENODEV; - } - - parent = i2c_get_adapter(pdata->parent); - if (!parent) { - dev_err(&pdev->dev, "Parent adapter (%d) not found\n", - pdata->parent); - return -ENODEV; - } - switch (pdata->parent) { - case BUS9: - dev_num = BUS9_DEV_NUM; - break; - default : - dev_num = DEFAULT_NUM; - break; - } - - for (i = 0; i < dev_num; i++) - i2c_del_mux_adapter(mux->child[i]); - - platform_set_drvdata(pdev, NULL); - i2c_put_adapter(mux->parent); - kfree(mux->child); - kfree(mux); - - return 0; -} -#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) -static int __exit swpld_mux_remove(struct platform_device *pdev) -{ - struct i2c_mux_core *muxc = platform_get_drvdata(pdev); - struct i2c_adapter *parent=muxc->parent; - - i2c_mux_del_adapters(muxc); - i2c_put_adapter(parent); - - return 0; -} -#endif - -static struct platform_driver swpld_mux_driver = { - .probe = swpld_mux_probe, - .remove = __exit_p(swpld_mux_remove), /* TODO */ - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag9064-swpld-mux", - }, -}; -/*---------------- MUX - end ------------- */ - -/*---------------- CPLD - start ------------- */ - -/* CPLD -- device */ - -static ssize_t get_present(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - uint8_t cmd_data[4]={0}; - int ret; - u64 data = 0; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_PRESENCE_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - ret=0; - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_PRESENCE_2; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); -// ret=0; - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_PRESENCE_3; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_PRESENCE_4; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_PRESENCE_5; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_PRESENCE_6; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_PRESENCE_7; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_PRESENCE_8; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - -static ssize_t get_lpmode(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - uint8_t cmd_data[4]={0}; - int ret; - u64 data = 0; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - ret=0; - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_LP_MODE_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_LP_MODE_2; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_LP_MODE_3; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_LP_MODE_4; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_LP_MODE_5; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_LP_MODE_6; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_LP_MODE_7; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_LP_MODE_8; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - -static ssize_t get_reset(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - uint8_t cmd_data[4]={0}; - int ret; - u64 data = 0; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESET_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret=0; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESET_2; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESET_3; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESET_4; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESET_5; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESET_6; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESET_7; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESET_8; - ret = dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - -static ssize_t get_response(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - uint8_t cmd_data[4]={0}; - int ret; - u64 data = 0; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESPONSE_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret = 0; - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESPONSE_2; - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESPONSE_3; - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESPONSE_4; - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESPONSE_5; - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESPONSE_6; - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESPONSE_7; - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESPONSE_8; - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - -static ssize_t get_interrupt(struct device *dev, struct device_attribute \ - *dev_attr, char *buf) -{ - uint8_t cmd_data[4]={0}; - int ret; - u64 data = 0; - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_GETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_INTERRUPT_1; - cmd_data[3] = 1; - cmd_data_len = sizeof(cmd_data); - ret=0; - data = (u64)(ret & 0xff); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_INTERRUPT_2; - data |= (u64)(ret & 0xff) << 8; - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_INTERRUPT_3; - data |= (u64)(ret & 0xff) << 16; - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_INTERRUPT_4; - data |= (u64)(ret & 0xff) << 24; - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_INTERRUPT_5; - data |= (u64)(ret & 0xff) << 32; - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_INTERRUPT_6; - data |= (u64)(ret & 0xff) << 40; - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_INTERRUPT_7; - data |= (u64)(ret & 0xff) << 48; - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_INTERRUPT_8; - data |= (u64)(ret & 0xff) << 56; - - return sprintf(buf, "0x%016llx\n", data); -} - - -static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - uint8_t cmd_data[4]={0}; - unsigned long long set_data; - int err; - - err = kstrtoull(buf, 16, &set_data); - if (err){ - return err; - } - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_SETDATA; - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_LP_MODE_1; - cmd_data[3] = (set_data & 0xff); - cmd_data_len = sizeof(cmd_data); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_LP_MODE_2; - cmd_data[3] = ((set_data >> 8 ) & 0xff); - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_LP_MODE_3; - cmd_data[3] = ((set_data >> 16 ) & 0xff); - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_LP_MODE_4; - cmd_data[3] = ((set_data >> 24 ) & 0xff); - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_LP_MODE_5; - cmd_data[3] = ((set_data >> 32 ) & 0xff); - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_LP_MODE_6; - cmd_data[3] = ((set_data >> 40 ) & 0xff); - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_LP_MODE_7; - cmd_data[3] = ((set_data >> 48 ) & 0xff); - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_LP_MODE_8; - cmd_data[3] = ((set_data >> 56 ) & 0xff); - - return count; -} - -static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - uint8_t cmd_data[4]={0}; - unsigned long long set_data; - int err; - - err = kstrtoull(buf, 16, &set_data); - if (err){ - return err; - } - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_SETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESET_1; - cmd_data[3] = (set_data & 0xff); - cmd_data_len = sizeof(cmd_data); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESET_2; - cmd_data[3] = ((set_data >> 8 ) & 0xff); - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESET_3; - cmd_data[3] = ((set_data >> 16 ) & 0xff); - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESET_4; - cmd_data[3] = ((set_data >> 24 ) & 0xff); - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESET_5; - cmd_data[3] = ((set_data >> 32 ) & 0xff); - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESET_6; - cmd_data[3] = ((set_data >> 40 ) & 0xff); - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESET_7; - cmd_data[3] = ((set_data >> 48 ) & 0xff); - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESET_8; - cmd_data[3] = ((set_data >> 56 ) & 0xff); - - return count; -} - -static ssize_t set_response(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) -{ - uint8_t cmd_data[4]={0}; - unsigned long long set_data; - int err; - - err = kstrtoull(buf, 16, &set_data); - if (err){ - return err; - } - uint8_t set_cmd; - int cmd_data_len; - - set_cmd = CMD_SETDATA; - - /*QSFP1~8*/ - cmd_data[0] = BMC_BUS_5; - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESPONSE_1; - cmd_data[3] = (set_data & 0xff); - cmd_data_len = sizeof(cmd_data); - - /*QSFP9~16*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESPONSE_2; - cmd_data[3] = ((set_data >> 8 ) & 0xff); - - /*QSFP17~24*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESPONSE_3; - cmd_data[3] = ((set_data >> 16 ) & 0xff); - - /*QSFP25~32*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESPONSE_4; - cmd_data[3] = ((set_data >> 24 ) & 0xff); - - /*QSFP33~40*/ - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = QSFP_RESPONSE_5; - cmd_data[3] = ((set_data >> 32 ) & 0xff); - - /*QSFP41~48*/ - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = QSFP_RESPONSE_6; - cmd_data[3] = ((set_data >> 40 ) & 0xff); - - /*QSFP49~56*/ - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = QSFP_RESPONSE_7; - cmd_data[3] = ((set_data >> 48 ) & 0xff); - - /*QSFP57~64*/ - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = QSFP_RESPONSE_8; - cmd_data[3] = ((set_data >> 56 ) & 0xff); - - return count; -} - -static DEVICE_ATTR(qsfp_present, S_IRUGO, get_present, NULL); -static DEVICE_ATTR(qsfp_lpmode, S_IWUSR | S_IRUGO, get_lpmode, set_lpmode); -static DEVICE_ATTR(qsfp_reset, S_IWUSR | S_IRUGO, get_reset, set_reset); -static DEVICE_ATTR(qsfp_modsel, S_IWUSR | S_IRUGO, get_response, set_response); -static DEVICE_ATTR(qsfp_interrupt, S_IRUGO, get_interrupt, NULL); - -static struct attribute *ag9064_cpld_attrs[] = { - &dev_attr_qsfp_present.attr, - &dev_attr_qsfp_lpmode.attr, - &dev_attr_qsfp_reset.attr, - &dev_attr_qsfp_modsel.attr, - &dev_attr_qsfp_interrupt.attr, - NULL, -}; - -static struct attribute_group ag9064_cpld_attr_grp = { - .attrs = ag9064_cpld_attrs, -}; - -enum cpld_type { - system_cpld, -}; - -struct cpld_platform_data { - int reg_addr; - struct i2c_client *client; -}; - -static struct cpld_platform_data ag9064_cpld_platform_data[] = { - [system_cpld] = { - .reg_addr = CPLD_REG, - }, -}; - -static struct platform_device ag9064_cpld = { - .name = "delta-ag9064-cpld", - .id = 0, - .dev = { - .platform_data = ag9064_cpld_platform_data, - .release = device_release - }, -}; - -static int __init cpld_probe(struct platform_device *pdev) -{ - struct cpld_platform_data *pdata; - struct i2c_adapter *parent; - int ret; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "CPLD platform data not found\n"); - return -ENODEV; - } - - parent = i2c_get_adapter(BUS7); - if (!parent) { - printk(KERN_WARNING "Parent adapter (%d) not found\n",BUS7); - return -ENODEV; - } - - pdata[system_cpld].client = i2c_new_dummy(parent, pdata[system_cpld].reg_addr); - if (!pdata[system_cpld].client) { - printk(KERN_WARNING "Fail to create dummy i2c client for addr %d\n", pdata[system_cpld].reg_addr); - goto error; - } - - ret = sysfs_create_group(&pdev->dev.kobj, &ag9064_cpld_attr_grp); - if (ret) { - printk(KERN_WARNING "Fail to create cpld attribute group"); - goto error; - } - - return 0; - -error: - i2c_unregister_device(pdata[system_cpld].client); - i2c_put_adapter(parent); - - return -ENODEV; -} - -static int __exit cpld_remove(struct platform_device *pdev) -{ - struct i2c_adapter *parent = NULL; - struct cpld_platform_data *pdata = pdev->dev.platform_data; - sysfs_remove_group(&pdev->dev.kobj, &ag9064_cpld_attr_grp); - - if (!pdata) { - dev_err(&pdev->dev, "Missing platform data\n"); - } - else { - if (pdata[system_cpld].client) { - if (!parent) { - parent = (pdata[system_cpld].client)->adapter; - } - i2c_unregister_device(pdata[system_cpld].client); - } - } - i2c_put_adapter(parent); - - return 0; -} - -static struct platform_driver cpld_driver = { - .probe = cpld_probe, - .remove = __exit_p(cpld_remove), - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag9064-cpld", - }, -}; - -/*---------------- CPLD - end ------------- */ - -/*---------------- module initialization ------------- */ - -static int __init delta_ag9064_platform_init(void) -{ - struct i2c_client *client; - struct i2c_adapter *adapter; - struct swpld_mux_platform_data *swpld_pdata; - struct cpld_platform_data * cpld_pdata; - int ret,i = 0; - - printk("ag9064_platform module initialization\n"); - - adapter = i2c_get_adapter(BUS2); - i2c_client_9548 = i2c_new_device(adapter, &i2c_info_pca9548[0]); - i2c_put_adapter(adapter); - - ret = dni_create_user(); - if (ret != 0){ - printk(KERN_WARNING "Fail to create IPMI user\n"); - } - - ret = platform_driver_register(&cpld_driver); - if (ret) { - printk(KERN_WARNING "Fail to register cpld driver\n"); - goto error_cpld_driver; - } - - // register the mux prob which call the SWPLD - ret = platform_driver_register(&swpld_mux_driver); - if (ret) { - printk(KERN_WARNING "Fail to register swpld mux driver\n"); - goto error_swpld_mux_driver; - } - - // register the i2c devices - ret = platform_driver_register(&i2c_device_driver); - if (ret) { - printk(KERN_WARNING "Fail to register i2c device driver\n"); - goto error_i2c_device_driver; - } - - // register the CPLD - ret = platform_device_register(&ag9064_cpld); - if (ret) { - printk(KERN_WARNING "Fail to create cpld device\n"); - goto error_ag9064_cpld; - } - - swpld_pdata = ag9064_swpld_mux[0].dev.platform_data; - ret = platform_device_register(&ag9064_swpld_mux[0]); - if (ret) { - printk(KERN_WARNING "Fail to create swpld mux\n"); - goto error_ag9064_swpld_mux; - } - - for (i = 0; i < ARRAY_SIZE(ag9064_i2c_device); i++) - { - ret = platform_device_register(&ag9064_i2c_device[i]); - if (ret) - { - printk(KERN_WARNING "Fail to create i2c device %d\n", i); - goto error_ag9064_i2c_device; - } - } - if (ret) - goto error_ag9064_swpld_mux; - - return 0; - -error_ag9064_i2c_device: - i--; - for (; i >= 0; i--) { - platform_device_unregister(&ag9064_i2c_device[i]); - } - i = ARRAY_SIZE(ag9064_swpld_mux); -error_ag9064_swpld_mux: - i--; - for (; i >= 0; i--) { - platform_device_unregister(&ag9064_swpld_mux); - } - platform_driver_unregister(&ag9064_cpld); -error_ag9064_cpld: - platform_driver_unregister(&i2c_device_driver); -error_i2c_device_driver: - platform_driver_unregister(&swpld_mux_driver); -error_swpld_mux_driver: - platform_driver_unregister(&cpld_driver); -error_cpld_driver: - return ret; -} - -static void __exit delta_ag9064_platform_exit(void) -{ - int i = 0; - - for ( i = 0; i < ARRAY_SIZE(ag9064_i2c_device); i++ ) { - platform_device_unregister(&ag9064_i2c_device[i]); - } - - platform_device_unregister(&ag9064_swpld_mux); - platform_device_unregister(&ag9064_cpld); - platform_driver_unregister(&i2c_device_driver); - platform_driver_unregister(&swpld_mux_driver); - platform_driver_unregister(&cpld_driver); - i2c_unregister_device(i2c_client_9548); -} - -module_init(delta_ag9064_platform_init); -module_exit(delta_ag9064_platform_exit); - -MODULE_DESCRIPTION("DELTA ag9064 Platform Support"); -MODULE_AUTHOR("Johnson Lu "); -MODULE_LICENSE("GPL"); +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "delta_ag9064_common.h" + +#define SFF8436_INFO(data) \ + .type = "sff8436", .addr = 0x50, .platform_data = (data) + +#define SFF_8346_PORT(eedata) \ + .byte_len = 256, .page_size = 1, .flags = SFF_8436_FLAG_READONLY + +#define ag9064_i2c_device_num(NUM){ \ + .name = "delta-ag9064-i2c-device", \ + .id = NUM, \ + .dev = { \ + .platform_data = &ag9064_i2c_device_platform_data[NUM], \ + .release = device_release, \ + }, \ +} + +struct i2c_client * i2c_client_9548; + + +/* pca9548 - add 8 bus */ +static struct pca954x_platform_mode pca954x_mode[] = +{ + { + .adap_id = 7, + .deselect_on_exit = 1, + }, + { + .adap_id = 8, + .deselect_on_exit = 1, + }, + { + .adap_id = 9, + .deselect_on_exit = 1, + }, + { + .adap_id = 10, + .deselect_on_exit = 1, + }, + { + .adap_id = 11, + .deselect_on_exit = 1, + }, + { + .adap_id = 12, + .deselect_on_exit = 1, + }, + { + .adap_id = 13, + .deselect_on_exit = 1, + }, + { + .adap_id = 14, + .deselect_on_exit = 1, + }, +}; + +static struct pca954x_platform_data pca954x_data = +{ + .modes = pca954x_mode, + .num_modes = ARRAY_SIZE(pca954x_mode), +}; + +static struct i2c_board_info __initdata i2c_info_pca9548[] = +{ + { + I2C_BOARD_INFO("pca9548", 0x70), + .platform_data = &pca954x_data, + }, +}; + +static struct sff_8436_platform_data sff_8436_port[] = { + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, + { SFF_8346_PORT() }, +}; + +void device_release(struct device *dev) +{ + return; +} +EXPORT_SYMBOL(device_release); +void msg_handler(struct ipmi_recv_msg *recv_msg, void* handler_data) +{ + struct completion *comp = recv_msg->user_msg_data; + if (comp) + complete(comp); + else + ipmi_free_recv_msg(recv_msg); + return; +} +EXPORT_SYMBOL(msg_handler); +void dummy_smi_free(struct ipmi_smi_msg *msg) +{ + atomic_dec(&dummy_count); +} +EXPORT_SYMBOL(dummy_smi_free); +void dummy_recv_free(struct ipmi_recv_msg *msg) +{ + atomic_dec(&dummy_count); +} +EXPORT_SYMBOL(dummy_recv_free); +unsigned char dni_log2 (unsigned char num){ + unsigned char num_log2 = 0; + while(num > 0){ + num = num >> 1; + num_log2 += 1; + } + return num_log2 -1; +} +EXPORT_SYMBOL(dni_log2); + +/*---------------- IPMI - start ------------- */ + +int dni_create_user(void) +{ + int rv, i; + + for (i=0,rv=1; idev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", + pdata->parent); + return -ENODEV; + } + + pdata->client = i2c_new_device(parent, &pdata->info); + if (!pdata->client) { + dev_err(&pdev->dev, "Failed to create i2c client %s at %d\n", + pdata->info.type, pdata->parent); + return -ENODEV; + } + + return 0; + +} + +static int __exit i2c_deivce_remove(struct platform_device *pdev) +{ + struct i2c_adapter *parent; + struct i2c_device_platform_data *pdata; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + if (pdata->client) { + parent = (pdata->client)->adapter; + i2c_unregister_device(pdata->client); + i2c_put_adapter(parent); + } + + return 0; +} +static struct platform_driver i2c_device_driver = { + .probe = i2c_device_probe, + .remove = __exit_p(i2c_deivce_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag9064-i2c-device", + } +}; + +/*---------------- I2C driver - end ------------- */ + +/*---------------- MUX - start ------------- */ + +struct swpld_mux_platform_data { + int parent; + int base_nr; +// struct i2c_client *cpld; +}; + +struct swpld_mux { + struct i2c_adapter *parent; + struct i2c_adapter **child; + struct swpld_mux_platform_data data; +}; + +static struct swpld_mux_platform_data ag9064_swpld_mux_platform_data[] = { + { + .parent = BUS9, + .base_nr = BUS9_BASE_NUM, +// .cpld = NULL, + }, +}; + +static struct platform_device ag9064_swpld_mux[] = +{ + { + .name = "delta-ag9064-swpld-mux", + .id = 0, + .dev = { + .platform_data = &ag9064_swpld_mux_platform_data[0], + .release = device_release, + }, + }, +}; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +static int swpld_mux_select(struct i2c_adapter *adap, void *data, u8 chan) +{ + uint8_t cmd_data[4]={0}; + struct swpld_mux *mux = data; + uint8_t set_cmd; + int cmd_data_len; + + if ( mux->data.base_nr == BUS9_BASE_NUM ) + { + set_cmd = CMD_SETDATA; + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_PORT_MUX_REG; + cmd_data[3] = chan + 1; + cmd_data_len = sizeof(cmd_data); + return dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + } + else + { + printk(KERN_ERR "Swpld mux QSFP select port error\n"); + return 0; + } +} +#else +static int swpld_mux_select(struct i2c_mux_core *muxc, u32 chan) +{ + uint8_t cmd_data[4]={0}; + struct swpld_mux *mux = i2c_mux_priv(muxc); + uint8_t set_cmd; + int cmd_data_len; + + if ( mux->data.base_nr == BUS9_BASE_NUM ) + { + set_cmd = CMD_SETDATA; + cmd_data[0] = BMC_BUS_5; + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = QSFP_PORT_MUX_REG; + cmd_data[3] = chan + 1; + cmd_data_len = sizeof(cmd_data); + return dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + } + else + { + printk(KERN_ERR "Swpld mux QSFP select port error\n"); + return 0; + } + +} +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +static int __init swpld_mux_probe(struct platform_device *pdev) +{ + struct swpld_mux *mux; + struct swpld_mux_platform_data *pdata; + struct i2c_adapter *parent; + int i, ret, dev_num; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "SWPLD platform data not found\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", pdata->parent); + return -ENODEV; + } + /* Judge bus number to decide how many devices*/ + switch (pdata->parent) { + case BUS9: + dev_num = BUS9_DEV_NUM; + break; + default : + dev_num = DEFAULT_NUM; + break; + } + + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) { + ret = -ENOMEM; + printk(KERN_ERR "Failed to allocate memory for mux\n"); + goto alloc_failed; + } + + mux->parent = parent; + mux->data = *pdata; + mux->child = kzalloc(sizeof(struct i2c_adapter *) * dev_num, GFP_KERNEL); + if (!mux->child) { + ret = -ENOMEM; + printk(KERN_ERR "Failed to allocate memory for device on mux\n"); + goto alloc_failed2; + } + + for (i = 0; i < dev_num; i++) + { + int nr = pdata->base_nr + i; + unsigned int class = 0; + + mux->child[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, + nr, i, class, + swpld_mux_select, NULL); + if (!mux->child[i]) + { + ret = -ENODEV; + dev_err(&pdev->dev, "Failed to add adapter %d\n", i); + goto add_adapter_failed; + } + } + + platform_set_drvdata(pdev, mux); + return 0; + +add_adapter_failed: + for (; i > 0; i--) + i2c_del_mux_adapter(mux->child[i - 1]); + kfree(mux->child); +alloc_failed2: + kfree(mux); +alloc_failed: + i2c_put_adapter(parent); + + return ret; +} +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int __init swpld_mux_probe(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc; + struct swpld_mux *mux; + struct swpld_mux_platform_data *pdata; + struct i2c_adapter *parent; + int i, ret, dev_num; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "SWPLD platform data not found\n"); + return -ENODEV; + } + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) { + printk(KERN_ERR "Failed to allocate memory for mux\n"); + return -ENOMEM; + } + mux->data = *pdata; + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + kfree(mux); + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", pdata->parent); + return -ENODEV; + } + /* Judge bus number to decide how many devices*/ + switch (pdata->parent) { + case BUS9: + dev_num = BUS9_DEV_NUM; + break; + default : + dev_num = DEFAULT_NUM; + break; + } + + muxc = i2c_mux_alloc(parent, &pdev->dev, dev_num, 0, 0,swpld_mux_select, NULL); + if (!muxc) { + ret = -ENOMEM; + goto alloc_failed; + } + muxc->priv = mux; + platform_set_drvdata(pdev, muxc); + + for (i = 0; i < dev_num; i++) + { + int nr = pdata->base_nr + i; + unsigned int class = 0; + ret = i2c_mux_add_adapter(muxc, nr, i, class); + if (ret) { + dev_err(&pdev->dev, "Failed to add adapter %d\n", i); + goto add_adapter_failed; + } + } + dev_info(&pdev->dev, "%d port mux on %s adapter\n", dev_num, parent->name); + return 0; + +add_adapter_failed: + i2c_mux_del_adapters(muxc); +alloc_failed2: + kfree(mux); +alloc_failed: + i2c_put_adapter(parent); + + return ret; +} +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +static int __exit swpld_mux_remove(struct platform_device *pdev) +{ + int i; + struct swpld_mux *mux = platform_get_drvdata(pdev); + struct swpld_mux_platform_data *pdata; + struct i2c_adapter *parent; + int dev_num; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "SWPLD platform data not found\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", + pdata->parent); + return -ENODEV; + } + switch (pdata->parent) { + case BUS9: + dev_num = BUS9_DEV_NUM; + break; + default : + dev_num = DEFAULT_NUM; + break; + } + + for (i = 0; i < dev_num; i++) + i2c_del_mux_adapter(mux->child[i]); + + platform_set_drvdata(pdev, NULL); + i2c_put_adapter(mux->parent); + kfree(mux->child); + kfree(mux); + + return 0; +} +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int __exit swpld_mux_remove(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc = platform_get_drvdata(pdev); + struct i2c_adapter *parent=muxc->parent; + + i2c_mux_del_adapters(muxc); + i2c_put_adapter(parent); + + return 0; +} +#endif + +static struct platform_driver swpld_mux_driver = { + .probe = swpld_mux_probe, + .remove = __exit_p(swpld_mux_remove), /* TODO */ + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag9064-swpld-mux", + }, +}; + +/*---------------- MUX - end ------------- */ + +/*---------------- module initialization ------------- */ + +static int __init delta_ag9064_platform_init(void) +{ +// struct i2c_client *client; + struct i2c_adapter *adapter; + struct swpld_mux_platform_data *swpld_pdata; +// struct cpld_platform_data * cpld_pdata; + int ret,i = 0; + + printk("ag9064_platform module initialization\n"); + + adapter = i2c_get_adapter(BUS2); + i2c_client_9548 = i2c_new_device(adapter, &i2c_info_pca9548[0]); + i2c_put_adapter(adapter); + + ret = dni_create_user(); + if (ret != 0){ + printk(KERN_WARNING "Fail to create IPMI user\n"); + } + + // register the mux prob which call the SWPLD + ret = platform_driver_register(&swpld_mux_driver); + if (ret) { + printk(KERN_WARNING "Fail to register swpld mux driver\n"); + goto error_swpld_mux_driver; + } + + // register the i2c devices + ret = platform_driver_register(&i2c_device_driver); + if (ret) { + printk(KERN_WARNING "Fail to register i2c device driver\n"); + goto error_i2c_device_driver; + } + + swpld_pdata = ag9064_swpld_mux[0].dev.platform_data; + ret = platform_device_register(&ag9064_swpld_mux[0]); + if (ret) { + printk(KERN_WARNING "Fail to create swpld mux\n"); + goto error_ag9064_swpld_mux; + } + + for (i = 0; i < ARRAY_SIZE(ag9064_i2c_device); i++) + { + ret = platform_device_register(&ag9064_i2c_device[i]); + if (ret) + { + printk(KERN_WARNING "Fail to create i2c device %d\n", i); + goto error_ag9064_i2c_device; + } + } + if (ret) + goto error_ag9064_swpld_mux; + + return 0; + +error_ag9064_i2c_device: + i--; + for (; i >= 0; i--) { + platform_device_unregister(&ag9064_i2c_device[i]); + } + i = ARRAY_SIZE(ag9064_swpld_mux); +error_ag9064_swpld_mux: + platform_device_unregister(&ag9064_swpld_mux[0]); + platform_driver_unregister(&i2c_device_driver); +error_i2c_device_driver: + platform_driver_unregister(&swpld_mux_driver); +error_swpld_mux_driver: + return ret; +} + +static void __exit delta_ag9064_platform_exit(void) +{ + int i = 0; + + for ( i = 0; i < ARRAY_SIZE(ag9064_i2c_device); i++ ) { + platform_device_unregister(&ag9064_i2c_device[i]); + } + + platform_device_unregister(&ag9064_swpld_mux[0]); + platform_driver_unregister(&i2c_device_driver); + platform_driver_unregister(&swpld_mux_driver); + i2c_unregister_device(i2c_client_9548); +} + +module_init(delta_ag9064_platform_init); +module_exit(delta_ag9064_platform_exit); + +MODULE_DESCRIPTION("DELTA ag9064 Platform Support"); +MODULE_AUTHOR("Johnson Lu "); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_swpld.c b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_swpld.c index 80a0ddc0d370..cab54a43bb07 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_swpld.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag9064/modules/delta_ag9064_swpld.c @@ -1,620 +1,623 @@ -#include "delta_ag9064_common.h" - -unsigned char swpld1_reg_addr; -unsigned char swpld2_reg_addr; -unsigned char swpld3_reg_addr; -unsigned char swpld4_reg_addr; - -/*---------------- CPLD - start ------------- */ -/* SWPLD1 -- device */ -static struct platform_device swpld1_device = { - .name = "delta-ag9064-swpld1", - .id = 0, - .dev = { - .platform_data = ag9064_swpld1_platform_data, - .release = device_release - }, -}; - -static struct platform_device swpld2_device = { - .name = "delta-ag9064-swpld2", - .id = 0, - .dev = { - .platform_data = ag9064_swpld2_platform_data, - .release = device_release - }, -}; -static struct platform_device swpld3_device = { - .name = "delta-ag9064-swpld3", - .id = 0, - .dev = { - .platform_data = ag9064_swpld3_platform_data, - .release = device_release - }, -}; -static struct platform_device swpld4_device = { - .name = "delta-ag9064-swpld4", - .id = 0, - .dev = { - .platform_data = ag9064_swpld4_platform_data, - .release = device_release - }, -}; - -static ssize_t get_swpld_reg(struct device *dev, struct device_attribute *dev_attr, char *buf) -{ - int ret; - int mask; - int value; - int cmd_data_len; - char note[200]; - uint8_t cmd_data[4]={0}; - uint8_t get_cmd; - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); - - cmd_data_len = sizeof(cmd_data); - get_cmd = CMD_GETDATA; - cmd_data[0] = BMC_BUS_5; - cmd_data[3] = 1; - mask = attribute_data[attr->index].mask; - sprintf(note, "\n%s\n",attribute_data[attr->index].note); - - if (attr->index <= SWPLD4_REG_VALUE){ - switch (attr->index) { - case SWPLD1_REG_ADDR: - return sprintf(buf, "0x%02x\n", swpld1_reg_addr); - case SWPLD2_REG_ADDR: - return sprintf(buf, "0x%02x\n", swpld2_reg_addr); - case SWPLD3_REG_ADDR: - return sprintf(buf, "0x%02x\n", swpld3_reg_addr); - case SWPLD4_REG_ADDR: - return sprintf(buf, "0x%02x\n", swpld4_reg_addr); - case SWPLD1_REG_VALUE: - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = swpld1_reg_addr; - break; - case SWPLD2_REG_VALUE: - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = swpld2_reg_addr; - break; - case SWPLD3_REG_VALUE: - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = swpld3_reg_addr; - break; - case SWPLD4_REG_VALUE: - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = swpld4_reg_addr; - break; - default: - return sprintf(buf, "%d not found", attr->index); - } - ret = dni_bmc_cmd(get_cmd, cmd_data, cmd_data_len); - ret = ret & 0xff; - return sprintf(buf, "0x%02x\n", ret); - }else{ - - switch (attr->index) { - case SWPLD1_MAJOR_VER ... PSU_LED_MODE : - cmd_data[1] = SWPLD1_ADDR; - break; - case SWPLD2_MAJOR_VER ... FAN_MOD4_LED : - cmd_data[1] = SWPLD2_ADDR; - break; - case SWPLD3_MAJOR_VER ... PLATFORM_TYPE : - cmd_data[1] = SWPLD3_ADDR; - break; - case SWPLD4_MAJOR_VER ... FAN_EEPROM_WP : - cmd_data[1] = SWPLD4_ADDR; - break; - default: - return sprintf(buf, "%d not found", attr->index); - } - cmd_data[2] = attribute_data[attr->index].reg; - value = dni_bmc_cmd(get_cmd, cmd_data, cmd_data_len); - value = value & mask; - switch (mask) { - case 0xFF: - return sprintf(buf, "0x%02x%s", value, note); - case 0x0F: - return sprintf(buf, "0x%01x%s", value, note); - case 0xF0: - value = value >> 4; - return sprintf(buf, "0x%01x%s", value, note); - case 0xC0: - value = value >> 6; - return sprintf(buf, "0x%01x%s", value, note); - case 0x30: - value = value >> 4; - return sprintf(buf, "0x%01x%s", value, note); - default : - value = value >> dni_log2(mask); - return sprintf(buf, "%d%s", value, note); - } - } -} - -static ssize_t set_swpld_reg(struct device *dev, struct device_attribute *dev_attr, - const char *buf, size_t count) -{ - int err; - int value; - int set_data; - int cmd_data_len; - uint8_t cmd_data[4]={0}; - uint8_t set_cmd; - uint8_t get_cmd; - unsigned char mask; - unsigned char mask_out; - struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); - - cmd_data_len = sizeof(cmd_data); - set_cmd = CMD_SETDATA; - get_cmd = CMD_GETDATA; - - err = kstrtoul(buf, 0, &set_data); - if (err){ - return err; - } - - if (set_data > 0xff){ - printk(KERN_ALERT "address out of range (0x00-0xFF)\n"); - return count; - } - if (attr->index <= SWPLD4_REG_VALUE){ - cmd_data[0] = BMC_BUS_5; - cmd_data[3] = set_data; - switch (attr->index) { - //reg_addr - case SWPLD1_REG_ADDR: - swpld1_reg_addr = set_data; - return count; - case SWPLD2_REG_ADDR: - swpld2_reg_addr = set_data; - return count; - case SWPLD3_REG_ADDR: - swpld3_reg_addr = set_data; - return count; - case SWPLD4_REG_ADDR: - swpld4_reg_addr = set_data; - return count; - //reg_value - case SWPLD1_REG_VALUE: - cmd_data[1] = SWPLD1_ADDR; - cmd_data[2] = swpld1_reg_addr; - break; - case SWPLD2_REG_VALUE: - cmd_data[1] = SWPLD2_ADDR; - cmd_data[2] = swpld2_reg_addr; - break; - case SWPLD3_REG_VALUE: - cmd_data[1] = SWPLD3_ADDR; - cmd_data[2] = swpld3_reg_addr; - break; - case SWPLD4_REG_VALUE: - cmd_data[1] = SWPLD4_ADDR; - cmd_data[2] = swpld4_reg_addr; - break; - default : - return sprintf(buf, "%d not found", attr->index); - } - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - return count; - } - else{ - cmd_data[0] = BMC_BUS_5; - cmd_data[2] = attribute_data[attr->index].reg; - cmd_data[3] = 1; - switch (attr->index) { - //attributes - case SWPLD1_MAJOR_VER ... PSU_LED_MODE://SWPLD1 - cmd_data[1] = SWPLD1_ADDR; - break; - case SWPLD2_MAJOR_VER ... FAN_MOD4_LED://SWPLD2 - cmd_data[1] = SWPLD2_ADDR; - break; - case SWPLD3_MAJOR_VER ... PLATFORM_TYPE://SWPLD3 - cmd_data[1] = SWPLD3_ADDR; - break; - case SWPLD4_MAJOR_VER ... FAN_EEPROM_WP://SWPLD4 - cmd_data[1] = SWPLD4_ADDR; - break; - default: - return sprintf(buf, "%d not found", attr->index); - } - - value = dni_bmc_cmd(get_cmd, cmd_data, cmd_data_len); - mask = attribute_data[attr->index].mask; - mask_out = value & ~(mask); - cmd_data[3] = set_data; - switch (mask) { - case 0xFF: - set_data = mask_out | (set_data & mask); - break; - case 0x0F: - set_data = mask_out | (set_data & mask); - break; - case 0xF0: - set_data = set_data << 4; - set_data = mask_out | (set_data & mask); - break; - case 0xC0: - set_data = set_data << 6; - set_data = mask_out | (set_data & mask); - break; - case 0x30: - set_data = set_data << 4; - set_data = mask_out | (set_data & mask); - break; - default : - set_data = mask_out | (set_data << dni_log2(mask) ); - } - dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); - return count; - } -} - -//SWPLD -static SENSOR_DEVICE_ATTR(swpld1_reg_addr, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD1_REG_ADDR); -static SENSOR_DEVICE_ATTR(swpld1_reg_value, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD1_REG_VALUE); -static SENSOR_DEVICE_ATTR(swpld2_reg_addr, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD2_REG_ADDR); -static SENSOR_DEVICE_ATTR(swpld2_reg_value, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD2_REG_VALUE); -static SENSOR_DEVICE_ATTR(swpld3_reg_addr, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD3_REG_ADDR); -static SENSOR_DEVICE_ATTR(swpld3_reg_value, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD3_REG_VALUE); -static SENSOR_DEVICE_ATTR(swpld4_reg_addr, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD4_REG_ADDR); -static SENSOR_DEVICE_ATTR(swpld4_reg_value, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD4_REG_VALUE); -//SWPLD1 -static SENSOR_DEVICE_ATTR(swpld1_major_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD1_MAJOR_VER); -static SENSOR_DEVICE_ATTR(swpld1_minor_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD1_MINOR_VER); -static SENSOR_DEVICE_ATTR(swpld1_scrtch_reg, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD1_SCRTCH_REG); -static SENSOR_DEVICE_ATTR(psu1_pwr_ok, S_IRUGO, get_swpld_reg, NULL, PSU1_PWR_OK); -static SENSOR_DEVICE_ATTR(psu1_int, S_IRUGO, get_swpld_reg, NULL, PSU1_INT); -static SENSOR_DEVICE_ATTR(psu2_pwr_ok, S_IRUGO, get_swpld_reg, NULL, PSU2_PWR_OK); -static SENSOR_DEVICE_ATTR(psu2_int, S_IRUGO, get_swpld_reg, NULL, PSU2_INT); -static SENSOR_DEVICE_ATTR(synce_int, S_IRUGO, get_swpld_reg, NULL, SYNCE_INT); -static SENSOR_DEVICE_ATTR(synce_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SYNCE_RST); -static SENSOR_DEVICE_ATTR(synce_eeprom_wp, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SYNCE_EEPROM_WP); -static SENSOR_DEVICE_ATTR(psu1_green_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, PSU1_GREEN_LED); -static SENSOR_DEVICE_ATTR(psu1_red_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, PSU1_RED_LED); -static SENSOR_DEVICE_ATTR(psu2_green_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, PSU2_GREEN_LED); -static SENSOR_DEVICE_ATTR(psu2_red_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, PSU2_RED_LED); -static SENSOR_DEVICE_ATTR(psu_led_mode, S_IRUGO, get_swpld_reg, NULL, PSU_LED_MODE); -//SWPLD2 -static SENSOR_DEVICE_ATTR(swpld2_major_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD2_MAJOR_VER); -static SENSOR_DEVICE_ATTR(swpld2_minor_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD2_MINOR_VER); -static SENSOR_DEVICE_ATTR(swpld2_scrtch_reg, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD2_SCRTCH_REG); -static SENSOR_DEVICE_ATTR(fan_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_LED); -static SENSOR_DEVICE_ATTR(sys_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SYS_LED); -static SENSOR_DEVICE_ATTR(fan_mod1_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_MOD1_LED); -static SENSOR_DEVICE_ATTR(fan_mod2_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_MOD2_LED); -static SENSOR_DEVICE_ATTR(fan_mod3_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_MOD3_LED); -static SENSOR_DEVICE_ATTR(fan_mod4_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_MOD4_LED); -//SWPLD3 -static SENSOR_DEVICE_ATTR(swpld3_major_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD3_MAJOR_VER); -static SENSOR_DEVICE_ATTR(swpld3_minor_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD3_MINOR_VER); -static SENSOR_DEVICE_ATTR(swpld3_scrtch_reg, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD3_SCRTCH_REG); -static SENSOR_DEVICE_ATTR(sb_ver, S_IRUGO, get_swpld_reg, NULL, SB_VER); -static SENSOR_DEVICE_ATTR(platform_type, S_IRUGO, get_swpld_reg, NULL, PLATFORM_TYPE); - -//SWPLD4 -static SENSOR_DEVICE_ATTR(swpld4_major_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD4_MAJOR_VER); -static SENSOR_DEVICE_ATTR(swpld4_minor_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD4_MINOR_VER); -static SENSOR_DEVICE_ATTR(swpld4_scrtch_reg, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD4_SCRTCH_REG); -static SENSOR_DEVICE_ATTR(bmc_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, BMC_RST); -static SENSOR_DEVICE_ATTR(cpld_lpc_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, CPLD_LPC_RST); -static SENSOR_DEVICE_ATTR(cpld_sw_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, CPLD_SW_RST); -static SENSOR_DEVICE_ATTR(mb_cpld_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, MB_CPLD_RST); -static SENSOR_DEVICE_ATTR(bcm56970_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, BCM56970_RST); - -static SENSOR_DEVICE_ATTR(cpld_upgrade_rst, S_IRUGO, get_swpld_reg, NULL, CPLD_UPGRADE_RST); -static SENSOR_DEVICE_ATTR(mb_rst_cpld, S_IRUGO, get_swpld_reg, NULL, MB_RST_CPLD); -static SENSOR_DEVICE_ATTR(cpu_rst_mb_oob, S_IRUGO, get_swpld_reg, NULL, CPU_RST_MB_OOB); -static SENSOR_DEVICE_ATTR(gpio_phy_rst, S_IRUGO, get_swpld_reg, NULL, GPIO_PHY_RST); -static SENSOR_DEVICE_ATTR(psu_fan_event, S_IRUGO, get_swpld_reg, NULL, PSU_FAN_EVENT); -static SENSOR_DEVICE_ATTR(cpu_thermal_int, S_IRUGO, get_swpld_reg, NULL, CPU_THERMAL_INT); -static SENSOR_DEVICE_ATTR(fan_int, S_IRUGO, get_swpld_reg, NULL, FAN_INT); - -static SENSOR_DEVICE_ATTR(cpld_spi_wp, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, CPLD_SPI_WP); -static SENSOR_DEVICE_ATTR(rj45_console_sel, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, RJ45_CONSOLE_SEL); -static SENSOR_DEVICE_ATTR(system_int, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SYSTEM_INT); -static SENSOR_DEVICE_ATTR(cpld_mb_rst_done, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, CPLD_MB_RST_DONE); -static SENSOR_DEVICE_ATTR(mb_pwr_ok, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, MB_PWR_OK); -static SENSOR_DEVICE_ATTR(fan_eeprom_wp, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_EEPROM_WP); - -static struct attribute *swpld1_device_attrs[] = { - &sensor_dev_attr_swpld1_reg_value.dev_attr.attr, - &sensor_dev_attr_swpld1_reg_addr.dev_attr.attr, - &sensor_dev_attr_swpld1_major_ver.dev_attr.attr, - &sensor_dev_attr_swpld1_minor_ver.dev_attr.attr, - &sensor_dev_attr_swpld1_scrtch_reg.dev_attr.attr, - &sensor_dev_attr_psu1_pwr_ok.dev_attr.attr, - &sensor_dev_attr_psu1_int.dev_attr.attr, - &sensor_dev_attr_psu2_pwr_ok.dev_attr.attr, - &sensor_dev_attr_psu2_int.dev_attr.attr, - &sensor_dev_attr_synce_int.dev_attr.attr, - &sensor_dev_attr_synce_rst.dev_attr.attr, - &sensor_dev_attr_synce_eeprom_wp.dev_attr.attr, - &sensor_dev_attr_psu1_green_led.dev_attr.attr, - &sensor_dev_attr_psu1_red_led.dev_attr.attr, - &sensor_dev_attr_psu2_green_led.dev_attr.attr, - &sensor_dev_attr_psu2_red_led.dev_attr.attr, - &sensor_dev_attr_psu_led_mode.dev_attr.attr, - NULL, -}; - -static struct attribute *swpld2_device_attrs[] = { - &sensor_dev_attr_swpld2_reg_value.dev_attr.attr, - &sensor_dev_attr_swpld2_reg_addr.dev_attr.attr, - &sensor_dev_attr_swpld2_major_ver.dev_attr.attr, - &sensor_dev_attr_swpld2_minor_ver.dev_attr.attr, - &sensor_dev_attr_swpld2_scrtch_reg.dev_attr.attr, - &sensor_dev_attr_fan_led.dev_attr.attr, - &sensor_dev_attr_sys_led.dev_attr.attr, - &sensor_dev_attr_fan_mod1_led.dev_attr.attr, - &sensor_dev_attr_fan_mod2_led.dev_attr.attr, - &sensor_dev_attr_fan_mod3_led.dev_attr.attr, - &sensor_dev_attr_fan_mod4_led.dev_attr.attr, - NULL, -}; - -static struct attribute *swpld3_device_attrs[] = { - &sensor_dev_attr_swpld3_reg_value.dev_attr.attr, - &sensor_dev_attr_swpld3_reg_addr.dev_attr.attr, - &sensor_dev_attr_swpld3_major_ver.dev_attr.attr, - &sensor_dev_attr_swpld3_minor_ver.dev_attr.attr, - &sensor_dev_attr_swpld3_scrtch_reg.dev_attr.attr, - &sensor_dev_attr_sb_ver.dev_attr.attr, - &sensor_dev_attr_platform_type.dev_attr.attr, - NULL, -}; - -static struct attribute *swpld4_device_attrs[] = { - &sensor_dev_attr_swpld4_reg_value.dev_attr.attr, - &sensor_dev_attr_swpld4_reg_addr.dev_attr.attr, - &sensor_dev_attr_swpld4_major_ver.dev_attr.attr, - &sensor_dev_attr_swpld4_minor_ver.dev_attr.attr, - &sensor_dev_attr_swpld4_scrtch_reg.dev_attr.attr, - &sensor_dev_attr_bmc_rst.dev_attr.attr, - &sensor_dev_attr_cpld_lpc_rst.dev_attr.attr, - &sensor_dev_attr_cpld_sw_rst.dev_attr.attr, - &sensor_dev_attr_mb_cpld_rst.dev_attr.attr, - &sensor_dev_attr_bcm56970_rst.dev_attr.attr, - &sensor_dev_attr_cpld_upgrade_rst.dev_attr.attr, - &sensor_dev_attr_mb_rst_cpld.dev_attr.attr, - &sensor_dev_attr_cpu_rst_mb_oob.dev_attr.attr, - &sensor_dev_attr_gpio_phy_rst.dev_attr.attr, - &sensor_dev_attr_psu_fan_event.dev_attr.attr, - &sensor_dev_attr_cpu_thermal_int.dev_attr.attr, - &sensor_dev_attr_fan_int.dev_attr.attr, - &sensor_dev_attr_cpld_spi_wp.dev_attr.attr, - &sensor_dev_attr_rj45_console_sel.dev_attr.attr, - &sensor_dev_attr_system_int.dev_attr.attr, - &sensor_dev_attr_cpld_mb_rst_done.dev_attr.attr, - &sensor_dev_attr_mb_pwr_ok.dev_attr.attr, - &sensor_dev_attr_fan_eeprom_wp.dev_attr.attr, - NULL, -}; - -static struct attribute_group swpld1_device_attr_grp = { - .attrs = swpld1_device_attrs, -}; - -static struct attribute_group swpld2_device_attr_grp = { - .attrs = swpld2_device_attrs, -}; - -static struct attribute_group swpld3_device_attr_grp = { - .attrs = swpld3_device_attrs, -}; - -static struct attribute_group swpld4_device_attr_grp = { - .attrs = swpld4_device_attrs, -}; - -static int __init swpld1_probe(struct platform_device *pdev) -{ - int ret; - ret = sysfs_create_group(&pdev->dev.kobj, &swpld1_device_attr_grp); - if (ret) { - printk(KERN_WARNING "Fail to create cpld attribute group"); - return -ENODEV; - } - return 0; -} - -static int __init swpld2_probe(struct platform_device *pdev) -{ - int ret; - ret = sysfs_create_group(&pdev->dev.kobj, &swpld2_device_attr_grp); - if (ret) { - printk(KERN_WARNING "Fail to create cpld attribute group"); - return -ENODEV; - } - return 0; -} - -static int __init swpld3_probe(struct platform_device *pdev) -{ - int ret; - ret = sysfs_create_group(&pdev->dev.kobj, &swpld3_device_attr_grp); - if (ret) { - printk(KERN_WARNING "Fail to create cpld attribute group"); - return -ENODEV; - } - return 0; -} - -static int __init swpld4_probe(struct platform_device *pdev) -{ - int ret; - ret = sysfs_create_group(&pdev->dev.kobj, &swpld4_device_attr_grp); - if (ret) { - printk(KERN_WARNING "Fail to create cpld attribute group"); - return -ENODEV; - } - return 0; -} - -static int __exit swpld1_remove(struct platform_device *pdev) -{ - sysfs_remove_group(&pdev->dev.kobj, &swpld1_device_attr_grp); - return 0; -} - -static int __exit swpld2_remove(struct platform_device *pdev) -{ - sysfs_remove_group(&pdev->dev.kobj, &swpld2_device_attr_grp); - return 0; -} - -static int __exit swpld3_remove(struct platform_device *pdev) -{ - sysfs_remove_group(&pdev->dev.kobj, &swpld3_device_attr_grp); - return 0; -} - -static int __exit swpld4_remove(struct platform_device *pdev) -{ - sysfs_remove_group(&pdev->dev.kobj, &swpld4_device_attr_grp); - return 0; -} - -static struct platform_driver swpld1_driver = { - .probe = swpld1_probe, - .remove = __exit_p(swpld1_remove), - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag9064-swpld1", - }, -}; - -static struct platform_driver swpld2_driver = { - .probe = swpld2_probe, - .remove = __exit_p(swpld2_remove), - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag9064-swpld2", - }, -}; - -static struct platform_driver swpld3_driver = { - .probe = swpld3_probe, - .remove = __exit_p(swpld3_remove), - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag9064-swpld3", - }, -}; - -static struct platform_driver swpld4_driver = { - .probe = swpld4_probe, - .remove = __exit_p(swpld4_remove), - .driver = { - .owner = THIS_MODULE, - .name = "delta-ag9064-swpld4", - }, -}; -/*---------------- CPLD - end ------------- */ - -/*---------------- module initialization ------------- */ -static void __init delta_ag9064_swpld_init(void) -{ - int ret; - printk(KERN_WARNING "ag9064_platform_swpld module initialization\n"); - - ret = dni_create_user(); - if (ret != 0){ - printk(KERN_WARNING "Fail to create IPMI user\n"); - } - - // set the SWPLD prob and remove - ret = platform_driver_register(&swpld1_driver); - if (ret) { - printk(KERN_WARNING "Fail to register swpld driver\n"); - goto error_swpld1_driver; - } - - // register the SWPLD - ret = platform_device_register(&swpld1_device); - if (ret) { - printk(KERN_WARNING "Fail to create swpld device\n"); - goto error_swpld1_device; - } - - // set the SWPLD prob and remove - ret = platform_driver_register(&swpld2_driver); - if (ret) { - printk(KERN_WARNING "Fail to register swpld driver\n"); - goto error_swpld2_driver; - } - - // register the SWPLD - ret = platform_device_register(&swpld2_device); - if (ret) { - printk(KERN_WARNING "Fail to create swpld device\n"); - goto error_swpld2_device; - } - - // set the SWPLD prob and remove - ret = platform_driver_register(&swpld3_driver); - if (ret) { - printk(KERN_WARNING "Fail to register swpld driver\n"); - goto error_swpld3_driver; - } - - // register the SWPLD - ret = platform_device_register(&swpld3_device); - if (ret) { - printk(KERN_WARNING "Fail to create swpld device\n"); - goto error_swpld3_device; - } - - // set the SWPLD prob and remove - ret = platform_driver_register(&swpld4_driver); - if (ret) { - printk(KERN_WARNING "Fail to register swpld driver\n"); - goto error_swpld4_driver; - } - - // register the SWPLD - ret = platform_device_register(&swpld4_device); - if (ret) { - printk(KERN_WARNING "Fail to create swpld device\n"); - goto error_swpld4_device; - } - return 0; - -error_swpld4_device: - platform_driver_unregister(&swpld4_driver); -error_swpld4_driver: - platform_driver_unregister(&swpld3_device); -error_swpld3_device: - platform_driver_unregister(&swpld3_driver); -error_swpld3_driver: - platform_driver_unregister(&swpld2_device); -error_swpld2_device: - platform_driver_unregister(&swpld2_driver); -error_swpld2_driver: - platform_driver_unregister(&swpld1_device); -error_swpld1_device: - platform_driver_unregister(&swpld1_driver); -error_swpld1_driver: - return ret; -} - -static void __exit delta_ag9064_swpld_exit(void) -{ - platform_device_unregister(&swpld1_device); - platform_driver_unregister(&swpld1_driver); - platform_device_unregister(&swpld2_device); - platform_driver_unregister(&swpld2_driver); - platform_device_unregister(&swpld3_device); - platform_driver_unregister(&swpld3_driver); - platform_device_unregister(&swpld4_device); - platform_driver_unregister(&swpld4_driver); -} -module_init(delta_ag9064_swpld_init); -module_exit(delta_ag9064_swpld_exit); - -MODULE_DESCRIPTION("DNI ag9064 CPLD Platform Support"); -MODULE_AUTHOR("Stanley Chi "); -MODULE_LICENSE("GPL"); \ No newline at end of file +#include "delta_ag9064_common.h" + +unsigned char swpld1_reg_addr; +unsigned char swpld2_reg_addr; +unsigned char swpld3_reg_addr; +unsigned char swpld4_reg_addr; + +/*---------------- CPLD - start ------------- */ +/* SWPLD1 -- device */ +static struct platform_device swpld1_device = { + .name = "delta-ag9064-swpld1", + .id = 0, + .dev = { + .platform_data = ag9064_swpld1_platform_data, + .release = device_release + }, +}; + +static struct platform_device swpld2_device = { + .name = "delta-ag9064-swpld2", + .id = 0, + .dev = { + .platform_data = ag9064_swpld2_platform_data, + .release = device_release + }, +}; +static struct platform_device swpld3_device = { + .name = "delta-ag9064-swpld3", + .id = 0, + .dev = { + .platform_data = ag9064_swpld3_platform_data, + .release = device_release + }, +}; +static struct platform_device swpld4_device = { + .name = "delta-ag9064-swpld4", + .id = 0, + .dev = { + .platform_data = ag9064_swpld4_platform_data, + .release = device_release + }, +}; + +static ssize_t get_swpld_reg(struct device *dev, struct device_attribute *dev_attr, char *buf) +{ + int ret; + int mask; + int value; + int cmd_data_len; + char note[200]; + uint8_t cmd_data[4]={0}; + uint8_t get_cmd; + struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + + cmd_data_len = sizeof(cmd_data); + get_cmd = CMD_GETDATA; + cmd_data[0] = BMC_BUS_5; + cmd_data[3] = 1; + mask = attribute_data[attr->index].mask; + sprintf(note, "\n%s\n",attribute_data[attr->index].note); + + if (attr->index <= SWPLD4_REG_VALUE){ + switch (attr->index) { + case SWPLD1_REG_ADDR: + return sprintf(buf, "0x%02x\n", swpld1_reg_addr); + case SWPLD2_REG_ADDR: + return sprintf(buf, "0x%02x\n", swpld2_reg_addr); + case SWPLD3_REG_ADDR: + return sprintf(buf, "0x%02x\n", swpld3_reg_addr); + case SWPLD4_REG_ADDR: + return sprintf(buf, "0x%02x\n", swpld4_reg_addr); + case SWPLD1_REG_VALUE: + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = swpld1_reg_addr; + break; + case SWPLD2_REG_VALUE: + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = swpld2_reg_addr; + break; + case SWPLD3_REG_VALUE: + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = swpld3_reg_addr; + break; + case SWPLD4_REG_VALUE: + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = swpld4_reg_addr; + break; + default: + return sprintf(buf, "%d not found", attr->index); + } + ret = dni_bmc_cmd(get_cmd, cmd_data, cmd_data_len); + ret = ret & 0xff; + return sprintf(buf, "0x%02x\n", ret); + }else{ + + switch (attr->index) { + case SWPLD1_MAJOR_VER ... PSU_LED_MODE : + cmd_data[1] = SWPLD1_ADDR; + break; + case SWPLD2_MAJOR_VER ... FAN_MOD4_LED : + cmd_data[1] = SWPLD2_ADDR; + break; + case SWPLD3_MAJOR_VER ... PLATFORM_TYPE : + cmd_data[1] = SWPLD3_ADDR; + break; + case SWPLD4_MAJOR_VER ... FAN_EEPROM_WP : + cmd_data[1] = SWPLD4_ADDR; + break; + default: + return sprintf(buf, "%d not found", attr->index); + } + cmd_data[2] = attribute_data[attr->index].reg; + value = dni_bmc_cmd(get_cmd, cmd_data, cmd_data_len); + value = value & mask; + switch (mask) { + case 0xFF: + return sprintf(buf, "0x%02x%s", value, note); + case 0x0F: + return sprintf(buf, "0x%01x%s", value, note); + case 0xF0: + value = value >> 4; + return sprintf(buf, "0x%01x%s", value, note); + case 0xC0: + value = value >> 6; + return sprintf(buf, "0x%01x%s", value, note); + case 0x30: + value = value >> 4; + return sprintf(buf, "0x%01x%s", value, note); + default : + value = value >> dni_log2(mask); + return sprintf(buf, "%d%s", value, note); + } + } +} + +static ssize_t set_swpld_reg(struct device *dev, struct device_attribute *dev_attr, + const char *buf, size_t count) +{ + int err; + int value; + int set_data; + int cmd_data_len; + uint8_t cmd_data[4]={0}; + uint8_t set_cmd; + uint8_t get_cmd; + unsigned long set_data_ul; + unsigned char mask; + unsigned char mask_out; + struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + + cmd_data_len = sizeof(cmd_data); + set_cmd = CMD_SETDATA; + get_cmd = CMD_GETDATA; + + err = kstrtoul(buf, 0, &set_data_ul); + if (err){ + return err; + } + + if (set_data > 0xff){ + printk(KERN_ALERT "address out of range (0x00-0xFF)\n"); + return count; + } + + set_data = (int)set_data_ul; + if (attr->index <= SWPLD4_REG_VALUE){ + cmd_data[0] = BMC_BUS_5; + cmd_data[3] = set_data; + switch (attr->index) { + //reg_addr + case SWPLD1_REG_ADDR: + swpld1_reg_addr = set_data; + return count; + case SWPLD2_REG_ADDR: + swpld2_reg_addr = set_data; + return count; + case SWPLD3_REG_ADDR: + swpld3_reg_addr = set_data; + return count; + case SWPLD4_REG_ADDR: + swpld4_reg_addr = set_data; + return count; + //reg_value + case SWPLD1_REG_VALUE: + cmd_data[1] = SWPLD1_ADDR; + cmd_data[2] = swpld1_reg_addr; + break; + case SWPLD2_REG_VALUE: + cmd_data[1] = SWPLD2_ADDR; + cmd_data[2] = swpld2_reg_addr; + break; + case SWPLD3_REG_VALUE: + cmd_data[1] = SWPLD3_ADDR; + cmd_data[2] = swpld3_reg_addr; + break; + case SWPLD4_REG_VALUE: + cmd_data[1] = SWPLD4_ADDR; + cmd_data[2] = swpld4_reg_addr; + break; + default : + return sprintf(buf, "%d not found", attr->index); + } + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + return count; + } + else{ + cmd_data[0] = BMC_BUS_5; + cmd_data[2] = attribute_data[attr->index].reg; + cmd_data[3] = 1; + switch (attr->index) { + //attributes + case SWPLD1_MAJOR_VER ... PSU_LED_MODE://SWPLD1 + cmd_data[1] = SWPLD1_ADDR; + break; + case SWPLD2_MAJOR_VER ... FAN_MOD4_LED://SWPLD2 + cmd_data[1] = SWPLD2_ADDR; + break; + case SWPLD3_MAJOR_VER ... PLATFORM_TYPE://SWPLD3 + cmd_data[1] = SWPLD3_ADDR; + break; + case SWPLD4_MAJOR_VER ... FAN_EEPROM_WP://SWPLD4 + cmd_data[1] = SWPLD4_ADDR; + break; + default: + return sprintf(buf, "%d not found", attr->index); + } + + value = dni_bmc_cmd(get_cmd, cmd_data, cmd_data_len); + mask = attribute_data[attr->index].mask; + mask_out = value & ~(mask); + cmd_data[3] = set_data; + switch (mask) { + case 0xFF: + set_data = mask_out | (set_data & mask); + break; + case 0x0F: + set_data = mask_out | (set_data & mask); + break; + case 0xF0: + set_data = set_data << 4; + set_data = mask_out | (set_data & mask); + break; + case 0xC0: + set_data = set_data << 6; + set_data = mask_out | (set_data & mask); + break; + case 0x30: + set_data = set_data << 4; + set_data = mask_out | (set_data & mask); + break; + default : + set_data = mask_out | (set_data << dni_log2(mask) ); + } + dni_bmc_cmd(set_cmd, cmd_data, cmd_data_len); + return count; + } +} + +//SWPLD +static SENSOR_DEVICE_ATTR(swpld1_reg_addr, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD1_REG_ADDR); +static SENSOR_DEVICE_ATTR(swpld1_reg_value, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD1_REG_VALUE); +static SENSOR_DEVICE_ATTR(swpld2_reg_addr, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD2_REG_ADDR); +static SENSOR_DEVICE_ATTR(swpld2_reg_value, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD2_REG_VALUE); +static SENSOR_DEVICE_ATTR(swpld3_reg_addr, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD3_REG_ADDR); +static SENSOR_DEVICE_ATTR(swpld3_reg_value, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD3_REG_VALUE); +static SENSOR_DEVICE_ATTR(swpld4_reg_addr, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD4_REG_ADDR); +static SENSOR_DEVICE_ATTR(swpld4_reg_value, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD4_REG_VALUE); +//SWPLD1 +static SENSOR_DEVICE_ATTR(swpld1_major_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD1_MAJOR_VER); +static SENSOR_DEVICE_ATTR(swpld1_minor_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD1_MINOR_VER); +static SENSOR_DEVICE_ATTR(swpld1_scrtch_reg, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD1_SCRTCH_REG); +static SENSOR_DEVICE_ATTR(psu1_pwr_ok, S_IRUGO, get_swpld_reg, NULL, PSU1_PWR_OK); +static SENSOR_DEVICE_ATTR(psu1_int, S_IRUGO, get_swpld_reg, NULL, PSU1_INT); +static SENSOR_DEVICE_ATTR(psu2_pwr_ok, S_IRUGO, get_swpld_reg, NULL, PSU2_PWR_OK); +static SENSOR_DEVICE_ATTR(psu2_int, S_IRUGO, get_swpld_reg, NULL, PSU2_INT); +static SENSOR_DEVICE_ATTR(synce_int, S_IRUGO, get_swpld_reg, NULL, SYNCE_INT); +static SENSOR_DEVICE_ATTR(synce_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SYNCE_RST); +static SENSOR_DEVICE_ATTR(synce_eeprom_wp, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SYNCE_EEPROM_WP); +static SENSOR_DEVICE_ATTR(psu1_green_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, PSU1_GREEN_LED); +static SENSOR_DEVICE_ATTR(psu1_red_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, PSU1_RED_LED); +static SENSOR_DEVICE_ATTR(psu2_green_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, PSU2_GREEN_LED); +static SENSOR_DEVICE_ATTR(psu2_red_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, PSU2_RED_LED); +static SENSOR_DEVICE_ATTR(psu_led_mode, S_IRUGO, get_swpld_reg, NULL, PSU_LED_MODE); +//SWPLD2 +static SENSOR_DEVICE_ATTR(swpld2_major_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD2_MAJOR_VER); +static SENSOR_DEVICE_ATTR(swpld2_minor_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD2_MINOR_VER); +static SENSOR_DEVICE_ATTR(swpld2_scrtch_reg, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD2_SCRTCH_REG); +static SENSOR_DEVICE_ATTR(fan_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_LED); +static SENSOR_DEVICE_ATTR(sys_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SYS_LED); +static SENSOR_DEVICE_ATTR(fan_mod1_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_MOD1_LED); +static SENSOR_DEVICE_ATTR(fan_mod2_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_MOD2_LED); +static SENSOR_DEVICE_ATTR(fan_mod3_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_MOD3_LED); +static SENSOR_DEVICE_ATTR(fan_mod4_led, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_MOD4_LED); +//SWPLD3 +static SENSOR_DEVICE_ATTR(swpld3_major_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD3_MAJOR_VER); +static SENSOR_DEVICE_ATTR(swpld3_minor_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD3_MINOR_VER); +static SENSOR_DEVICE_ATTR(swpld3_scrtch_reg, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD3_SCRTCH_REG); +static SENSOR_DEVICE_ATTR(sb_ver, S_IRUGO, get_swpld_reg, NULL, SB_VER); +static SENSOR_DEVICE_ATTR(platform_type, S_IRUGO, get_swpld_reg, NULL, PLATFORM_TYPE); + +//SWPLD4 +static SENSOR_DEVICE_ATTR(swpld4_major_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD4_MAJOR_VER); +static SENSOR_DEVICE_ATTR(swpld4_minor_ver, S_IRUGO, get_swpld_reg, NULL, SWPLD4_MINOR_VER); +static SENSOR_DEVICE_ATTR(swpld4_scrtch_reg, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SWPLD4_SCRTCH_REG); +static SENSOR_DEVICE_ATTR(bmc_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, BMC_RST); +static SENSOR_DEVICE_ATTR(cpld_lpc_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, CPLD_LPC_RST); +static SENSOR_DEVICE_ATTR(cpld_sw_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, CPLD_SW_RST); +static SENSOR_DEVICE_ATTR(mb_cpld_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, MB_CPLD_RST); +static SENSOR_DEVICE_ATTR(bcm56970_rst, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, BCM56970_RST); + +static SENSOR_DEVICE_ATTR(cpld_upgrade_rst, S_IRUGO, get_swpld_reg, NULL, CPLD_UPGRADE_RST); +static SENSOR_DEVICE_ATTR(mb_rst_cpld, S_IRUGO, get_swpld_reg, NULL, MB_RST_CPLD); +static SENSOR_DEVICE_ATTR(cpu_rst_mb_oob, S_IRUGO, get_swpld_reg, NULL, CPU_RST_MB_OOB); +static SENSOR_DEVICE_ATTR(gpio_phy_rst, S_IRUGO, get_swpld_reg, NULL, GPIO_PHY_RST); +static SENSOR_DEVICE_ATTR(psu_fan_event, S_IRUGO, get_swpld_reg, NULL, PSU_FAN_EVENT); +static SENSOR_DEVICE_ATTR(cpu_thermal_int, S_IRUGO, get_swpld_reg, NULL, CPU_THERMAL_INT); +static SENSOR_DEVICE_ATTR(fan_int, S_IRUGO, get_swpld_reg, NULL, FAN_INT); + +static SENSOR_DEVICE_ATTR(cpld_spi_wp, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, CPLD_SPI_WP); +static SENSOR_DEVICE_ATTR(rj45_console_sel, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, RJ45_CONSOLE_SEL); +static SENSOR_DEVICE_ATTR(system_int, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, SYSTEM_INT); +static SENSOR_DEVICE_ATTR(cpld_mb_rst_done, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, CPLD_MB_RST_DONE); +static SENSOR_DEVICE_ATTR(mb_pwr_ok, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, MB_PWR_OK); +static SENSOR_DEVICE_ATTR(fan_eeprom_wp, S_IRUGO | S_IWUSR, get_swpld_reg, set_swpld_reg, FAN_EEPROM_WP); + +static struct attribute *swpld1_device_attrs[] = { + &sensor_dev_attr_swpld1_reg_value.dev_attr.attr, + &sensor_dev_attr_swpld1_reg_addr.dev_attr.attr, + &sensor_dev_attr_swpld1_major_ver.dev_attr.attr, + &sensor_dev_attr_swpld1_minor_ver.dev_attr.attr, + &sensor_dev_attr_swpld1_scrtch_reg.dev_attr.attr, + &sensor_dev_attr_psu1_pwr_ok.dev_attr.attr, + &sensor_dev_attr_psu1_int.dev_attr.attr, + &sensor_dev_attr_psu2_pwr_ok.dev_attr.attr, + &sensor_dev_attr_psu2_int.dev_attr.attr, + &sensor_dev_attr_synce_int.dev_attr.attr, + &sensor_dev_attr_synce_rst.dev_attr.attr, + &sensor_dev_attr_synce_eeprom_wp.dev_attr.attr, + &sensor_dev_attr_psu1_green_led.dev_attr.attr, + &sensor_dev_attr_psu1_red_led.dev_attr.attr, + &sensor_dev_attr_psu2_green_led.dev_attr.attr, + &sensor_dev_attr_psu2_red_led.dev_attr.attr, + &sensor_dev_attr_psu_led_mode.dev_attr.attr, + NULL, +}; + +static struct attribute *swpld2_device_attrs[] = { + &sensor_dev_attr_swpld2_reg_value.dev_attr.attr, + &sensor_dev_attr_swpld2_reg_addr.dev_attr.attr, + &sensor_dev_attr_swpld2_major_ver.dev_attr.attr, + &sensor_dev_attr_swpld2_minor_ver.dev_attr.attr, + &sensor_dev_attr_swpld2_scrtch_reg.dev_attr.attr, + &sensor_dev_attr_fan_led.dev_attr.attr, + &sensor_dev_attr_sys_led.dev_attr.attr, + &sensor_dev_attr_fan_mod1_led.dev_attr.attr, + &sensor_dev_attr_fan_mod2_led.dev_attr.attr, + &sensor_dev_attr_fan_mod3_led.dev_attr.attr, + &sensor_dev_attr_fan_mod4_led.dev_attr.attr, + NULL, +}; + +static struct attribute *swpld3_device_attrs[] = { + &sensor_dev_attr_swpld3_reg_value.dev_attr.attr, + &sensor_dev_attr_swpld3_reg_addr.dev_attr.attr, + &sensor_dev_attr_swpld3_major_ver.dev_attr.attr, + &sensor_dev_attr_swpld3_minor_ver.dev_attr.attr, + &sensor_dev_attr_swpld3_scrtch_reg.dev_attr.attr, + &sensor_dev_attr_sb_ver.dev_attr.attr, + &sensor_dev_attr_platform_type.dev_attr.attr, + NULL, +}; + +static struct attribute *swpld4_device_attrs[] = { + &sensor_dev_attr_swpld4_reg_value.dev_attr.attr, + &sensor_dev_attr_swpld4_reg_addr.dev_attr.attr, + &sensor_dev_attr_swpld4_major_ver.dev_attr.attr, + &sensor_dev_attr_swpld4_minor_ver.dev_attr.attr, + &sensor_dev_attr_swpld4_scrtch_reg.dev_attr.attr, + &sensor_dev_attr_bmc_rst.dev_attr.attr, + &sensor_dev_attr_cpld_lpc_rst.dev_attr.attr, + &sensor_dev_attr_cpld_sw_rst.dev_attr.attr, + &sensor_dev_attr_mb_cpld_rst.dev_attr.attr, + &sensor_dev_attr_bcm56970_rst.dev_attr.attr, + &sensor_dev_attr_cpld_upgrade_rst.dev_attr.attr, + &sensor_dev_attr_mb_rst_cpld.dev_attr.attr, + &sensor_dev_attr_cpu_rst_mb_oob.dev_attr.attr, + &sensor_dev_attr_gpio_phy_rst.dev_attr.attr, + &sensor_dev_attr_psu_fan_event.dev_attr.attr, + &sensor_dev_attr_cpu_thermal_int.dev_attr.attr, + &sensor_dev_attr_fan_int.dev_attr.attr, + &sensor_dev_attr_cpld_spi_wp.dev_attr.attr, + &sensor_dev_attr_rj45_console_sel.dev_attr.attr, + &sensor_dev_attr_system_int.dev_attr.attr, + &sensor_dev_attr_cpld_mb_rst_done.dev_attr.attr, + &sensor_dev_attr_mb_pwr_ok.dev_attr.attr, + &sensor_dev_attr_fan_eeprom_wp.dev_attr.attr, + NULL, +}; + +static struct attribute_group swpld1_device_attr_grp = { + .attrs = swpld1_device_attrs, +}; + +static struct attribute_group swpld2_device_attr_grp = { + .attrs = swpld2_device_attrs, +}; + +static struct attribute_group swpld3_device_attr_grp = { + .attrs = swpld3_device_attrs, +}; + +static struct attribute_group swpld4_device_attr_grp = { + .attrs = swpld4_device_attrs, +}; + +static int __init swpld1_probe(struct platform_device *pdev) +{ + int ret; + ret = sysfs_create_group(&pdev->dev.kobj, &swpld1_device_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create cpld attribute group"); + return -ENODEV; + } + return 0; +} + +static int __init swpld2_probe(struct platform_device *pdev) +{ + int ret; + ret = sysfs_create_group(&pdev->dev.kobj, &swpld2_device_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create cpld attribute group"); + return -ENODEV; + } + return 0; +} + +static int __init swpld3_probe(struct platform_device *pdev) +{ + int ret; + ret = sysfs_create_group(&pdev->dev.kobj, &swpld3_device_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create cpld attribute group"); + return -ENODEV; + } + return 0; +} + +static int __init swpld4_probe(struct platform_device *pdev) +{ + int ret; + ret = sysfs_create_group(&pdev->dev.kobj, &swpld4_device_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create cpld attribute group"); + return -ENODEV; + } + return 0; +} + +static int __exit swpld1_remove(struct platform_device *pdev) +{ + sysfs_remove_group(&pdev->dev.kobj, &swpld1_device_attr_grp); + return 0; +} + +static int __exit swpld2_remove(struct platform_device *pdev) +{ + sysfs_remove_group(&pdev->dev.kobj, &swpld2_device_attr_grp); + return 0; +} + +static int __exit swpld3_remove(struct platform_device *pdev) +{ + sysfs_remove_group(&pdev->dev.kobj, &swpld3_device_attr_grp); + return 0; +} + +static int __exit swpld4_remove(struct platform_device *pdev) +{ + sysfs_remove_group(&pdev->dev.kobj, &swpld4_device_attr_grp); + return 0; +} + +static struct platform_driver swpld1_driver = { + .probe = swpld1_probe, + .remove = __exit_p(swpld1_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag9064-swpld1", + }, +}; + +static struct platform_driver swpld2_driver = { + .probe = swpld2_probe, + .remove = __exit_p(swpld2_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag9064-swpld2", + }, +}; + +static struct platform_driver swpld3_driver = { + .probe = swpld3_probe, + .remove = __exit_p(swpld3_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag9064-swpld3", + }, +}; + +static struct platform_driver swpld4_driver = { + .probe = swpld4_probe, + .remove = __exit_p(swpld4_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-ag9064-swpld4", + }, +}; +/*---------------- CPLD - end ------------- */ + +/*---------------- module initialization ------------- */ +static int __init delta_ag9064_swpld_init(void) +{ + int ret; + printk(KERN_WARNING "ag9064_platform_swpld module initialization\n"); + + ret = dni_create_user(); + if (ret != 0){ + printk(KERN_WARNING "Fail to create IPMI user\n"); + } + + // set the SWPLD prob and remove + ret = platform_driver_register(&swpld1_driver); + if (ret) { + printk(KERN_WARNING "Fail to register swpld driver\n"); + goto error_swpld1_driver; + } + + // register the SWPLD + ret = platform_device_register(&swpld1_device); + if (ret) { + printk(KERN_WARNING "Fail to create swpld device\n"); + goto error_swpld1_device; + } + + // set the SWPLD prob and remove + ret = platform_driver_register(&swpld2_driver); + if (ret) { + printk(KERN_WARNING "Fail to register swpld driver\n"); + goto error_swpld2_driver; + } + + // register the SWPLD + ret = platform_device_register(&swpld2_device); + if (ret) { + printk(KERN_WARNING "Fail to create swpld device\n"); + goto error_swpld2_device; + } + + // set the SWPLD prob and remove + ret = platform_driver_register(&swpld3_driver); + if (ret) { + printk(KERN_WARNING "Fail to register swpld driver\n"); + goto error_swpld3_driver; + } + + // register the SWPLD + ret = platform_device_register(&swpld3_device); + if (ret) { + printk(KERN_WARNING "Fail to create swpld device\n"); + goto error_swpld3_device; + } + + // set the SWPLD prob and remove + ret = platform_driver_register(&swpld4_driver); + if (ret) { + printk(KERN_WARNING "Fail to register swpld driver\n"); + goto error_swpld4_driver; + } + + // register the SWPLD + ret = platform_device_register(&swpld4_device); + if (ret) { + printk(KERN_WARNING "Fail to create swpld device\n"); + goto error_swpld4_device; + } + return 0; + +error_swpld4_device: + platform_driver_unregister(&swpld4_driver); +error_swpld4_driver: + platform_device_unregister(&swpld3_device); +error_swpld3_device: + platform_driver_unregister(&swpld3_driver); +error_swpld3_driver: + platform_device_unregister(&swpld2_device); +error_swpld2_device: + platform_driver_unregister(&swpld2_driver); +error_swpld2_driver: + platform_device_unregister(&swpld1_device); +error_swpld1_device: + platform_driver_unregister(&swpld1_driver); +error_swpld1_driver: + return ret; +} + +static void __exit delta_ag9064_swpld_exit(void) +{ + platform_device_unregister(&swpld1_device); + platform_driver_unregister(&swpld1_driver); + platform_device_unregister(&swpld2_device); + platform_driver_unregister(&swpld2_driver); + platform_device_unregister(&swpld3_device); + platform_driver_unregister(&swpld3_driver); + platform_device_unregister(&swpld4_device); + platform_driver_unregister(&swpld4_driver); +} +module_init(delta_ag9064_swpld_init); +module_exit(delta_ag9064_swpld_exit); + +MODULE_DESCRIPTION("DNI ag9064 CPLD Platform Support"); +MODULE_AUTHOR("Stanley Chi "); +MODULE_LICENSE("GPL"); From 420f003698690fa8a3eb78a3f59b68075854c799 Mon Sep 17 00:00:00 2001 From: Mykola F <37578614+mykolaf@users.noreply.github.com> Date: Sat, 14 Apr 2018 08:50:34 +0300 Subject: [PATCH 102/180] [mellanox]: fix SAI build makefile (#29) --- platform/mellanox/mlnx-sai/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/platform/mellanox/mlnx-sai/Makefile b/platform/mellanox/mlnx-sai/Makefile index a858bf098df2..9a8005e5461f 100644 --- a/platform/mellanox/mlnx-sai/Makefile +++ b/platform/mellanox/mlnx-sai/Makefile @@ -6,8 +6,8 @@ MAIN_TARGET = mlnx-sai_1.mlnx.$(MLNX_SAI_VERSION)_amd64.deb $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # get sources - #rm -rf SAI-Implementation - #git clone https://github.com/Mellanox/SAI-Implementation.git + rm -rf SAI-Implementation + git clone https://github.com/Mellanox/SAI-Implementation.git # build pushd SAI-Implementation From 0fb388233ac6d5e7d21efe780e56dd8afdc8bed4 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Fri, 6 Apr 2018 14:58:18 +0000 Subject: [PATCH 103/180] [devices]: disable compiling ag9064 and ag5648 Signed-off-by: Guohan Lu --- platform/broadcom/sonic-platform-modules-delta/debian/rules | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/rules b/platform/broadcom/sonic-platform-modules-delta/debian/rules index d0398ecaca17..58a3597e7a44 100755 --- a/platform/broadcom/sonic-platform-modules-delta/debian/rules +++ b/platform/broadcom/sonic-platform-modules-delta/debian/rules @@ -5,7 +5,7 @@ export INSTALL_MOD_DIR:=extra KVERSION ?= $(shell uname -r) KERNEL_SRC := /lib/modules/$(KVERSION) MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= ag9032v1 ag9064 ag5648 +MODULE_DIRS:= ag9032v1 %: dh $@ --with=systemd From 6a0909e8a7044ce7c58aa95fcf9a9b8d8c5590cb Mon Sep 17 00:00:00 2001 From: yurypm Date: Wed, 18 Apr 2018 08:40:09 +0100 Subject: [PATCH 104/180] [baseimage]: Add derived package to initramfs-tools (#33) --- rules/initramfs-tools.mk | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/rules/initramfs-tools.mk b/rules/initramfs-tools.mk index 974da74b028c..3b797762dc28 100644 --- a/rules/initramfs-tools.mk +++ b/rules/initramfs-tools.mk @@ -7,4 +7,7 @@ INITRAMFS_TOOLS = initramfs-tools_$(INITRAMFS_TOOLS_VERSION)_all.deb $(INITRAMFS_TOOLS)_SRC_PATH = $(SRC_PATH)/initramfs-tools SONIC_MAKE_DEBS += $(INITRAMFS_TOOLS) -SONIC_STRETCH_DEBS += $(INITRAMFS_TOOLS) +INITRAMFS_TOOLS_CORE = initramfs-tools-core_$(INITRAMFS_TOOLS_VERSION)_all.deb +$(eval $(call add_derived_package,$(INITRAMFS_TOOLS),$(INITRAMFS_TOOLS_CORE))) + +SONIC_STRETCH_DEBS += $(INITRAMFS_TOOLS) $(INITRAMFS_TOOLS_CORE) From 0f0e7ab7e8aa57e3a2f142ceb7b74883de7fd230 Mon Sep 17 00:00:00 2001 From: Samuel Angebault Date: Fri, 27 Apr 2018 11:50:36 -0700 Subject: [PATCH 105/180] Add support 4.9 support for 7260CX3 (#34) --- files/Aboot/boot0.j2 | 2 ++ files/initramfs-tools/arista-convertfs.j2 | 3 +++ 2 files changed, 5 insertions(+) diff --git a/files/Aboot/boot0.j2 b/files/Aboot/boot0.j2 index 94f9b760352d..89a5299c4c67 100644 --- a/files/Aboot/boot0.j2 +++ b/files/Aboot/boot0.j2 @@ -175,6 +175,8 @@ platform_specific() { echo "hugepages=128" >> /tmp/append fi if [ "$platform" = "rook" ]; then + echo "iommu=on intel_iommu=on tsc=reliable pcie_ports=native" >>/tmp/append + echo "rhash_entries=1 usb-storage.delay_use=0" >>/tmp/append if [ -x /bin/readprefdl ]; then readprefdl -f /tmp/.system-prefdl -d > /mnt/flash/.system-prefdl elif [ -f /etc/prefdl ]; then diff --git a/files/initramfs-tools/arista-convertfs.j2 b/files/initramfs-tools/arista-convertfs.j2 index cd3b381aa276..81de6750837a 100644 --- a/files/initramfs-tools/arista-convertfs.j2 +++ b/files/initramfs-tools/arista-convertfs.j2 @@ -41,6 +41,9 @@ get_flash_dev() { wait_for_root_dev() { local try_rounds=30 while [ $try_rounds -gt 0 ]; do + if blkid | sed 's/"//g' | grep -q "$root_dev"; then + return 0 + fi if [ -e "$root_dev" ]; then return 0 fi From 145aa4ff70a76eaa94d306cbada53d9cef1f0893 Mon Sep 17 00:00:00 2001 From: StanleyCi <34563271+StanleyCi@users.noreply.github.com> Date: Wed, 2 May 2018 17:46:02 +0800 Subject: [PATCH 106/180] [delta]: Enable ag5648, et-6248brb, ag9064 and fix the build error of ag5648 PSU module. (#32) * 1. Fixed delta ag5648 PSU modules. 2. Enable build ag5648. Signed-off-by: neal tai * 1. Modified the kernel depends for ag5648. 2. Modified platform-modules-ag5648.service for install ag5648. Signed-off-by: neal tai * Enable the ag9064. Signed-off-by: Stanley Chi * Add Delta platform et-6248brb Signed-off-by: neal tai --- .../Delta-et-6248brb/port_config.ini | 51 + .../Delta-et-6248brb/sai.profile | 1 + .../x86_64-delta_et-6248brb-r0/fancontrol | 12 + .../fancontrol.service | 279 ++++++ .../x86_64-delta_et-6248brb-r0/installer.conf | 3 + .../led_proc_init.soc | 46 + .../x86_64-delta_et-6248brb-r0/minigraph.xml | 766 +++++++++++++++ .../plugins/eeprom.py | 32 + .../plugins/psuutil.py | 55 ++ .../plugins/sfputil.py | 88 ++ .../x86_64-delta_et-6248brb-r0/sensors.conf | 15 + platform/broadcom/one-image.mk | 1 + platform/broadcom/platform-modules-delta.mk | 6 + .../ag5648/modules/dni_ag5648_psu.c | 2 +- .../debian/control | 8 +- .../debian/platform-modules-ag5648.install | 1 + .../debian/platform-modules-et-6248brb.init | 80 ++ .../platform-modules-et-6248brb.install | 4 + .../sonic-platform-modules-delta/debian/rules | 2 +- .../et-6248brb/cfg/et-6248brb-modules.conf | 13 + .../et-6248brb/modules/Makefile | 2 + .../modules/delta_et-6248brb_platform.c | 918 ++++++++++++++++++ .../et-6248brb/modules/dni_gpio.c | 695 +++++++++++++ .../scripts/et-6248brb_platform_init.sh | 11 + .../et-6248brb/scripts/led_status.sh | 165 ++++ .../systemd/platform-modules-ag5648.service | 13 + .../platform-modules-et-6248brb.service | 13 + 27 files changed, 3279 insertions(+), 3 deletions(-) create mode 100755 device/delta/x86_64-delta_et-6248brb-r0/Delta-et-6248brb/port_config.ini create mode 100644 device/delta/x86_64-delta_et-6248brb-r0/Delta-et-6248brb/sai.profile create mode 100644 device/delta/x86_64-delta_et-6248brb-r0/fancontrol create mode 100755 device/delta/x86_64-delta_et-6248brb-r0/fancontrol.service create mode 100644 device/delta/x86_64-delta_et-6248brb-r0/installer.conf create mode 100644 device/delta/x86_64-delta_et-6248brb-r0/led_proc_init.soc create mode 100644 device/delta/x86_64-delta_et-6248brb-r0/minigraph.xml create mode 100644 device/delta/x86_64-delta_et-6248brb-r0/plugins/eeprom.py create mode 100644 device/delta/x86_64-delta_et-6248brb-r0/plugins/psuutil.py create mode 100644 device/delta/x86_64-delta_et-6248brb-r0/plugins/sfputil.py create mode 100644 device/delta/x86_64-delta_et-6248brb-r0/sensors.conf create mode 100755 platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.init create mode 100644 platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.install create mode 100644 platform/broadcom/sonic-platform-modules-delta/et-6248brb/cfg/et-6248brb-modules.conf create mode 100644 platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/delta_et-6248brb_platform.c create mode 100644 platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/dni_gpio.c create mode 100755 platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/et-6248brb_platform_init.sh create mode 100644 platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/led_status.sh create mode 100644 platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag5648.service create mode 100644 platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-et-6248brb.service diff --git a/device/delta/x86_64-delta_et-6248brb-r0/Delta-et-6248brb/port_config.ini b/device/delta/x86_64-delta_et-6248brb-r0/Delta-et-6248brb/port_config.ini new file mode 100755 index 000000000000..3747a5c4989d --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/Delta-et-6248brb/port_config.ini @@ -0,0 +1,51 @@ +# name lanes alias index +Ethernet0 1 1000 0 +Ethernet1 2 1000 1 +Ethernet2 3 1000 2 +Ethernet3 4 1000 3 +Ethernet4 5 1000 4 +Ethernet5 6 1000 5 +Ethernet6 7 1000 6 +Ethernet7 8 1000 7 +Ethernet8 9 1000 8 +Ethernet9 10 1000 9 +Ethernet10 11 1000 10 +Ethernet11 12 1000 11 +Ethernet12 13 1000 12 +Ethernet13 14 1000 13 +Ethernet14 15 1000 14 +Ethernet15 16 1000 15 +Ethernet16 17 1000 16 +Ethernet17 18 1000 17 +Ethernet18 19 1000 18 +Ethernet19 20 1000 19 +Ethernet20 21 1000 20 +Ethernet21 22 1000 21 +Ethernet22 23 1000 22 +Ethernet23 24 1000 23 +Ethernet24 25 1000 24 +Ethernet25 26 1000 25 +Ethernet26 27 1000 26 +Ethernet27 28 1000 27 +Ethernet28 29 1000 28 +Ethernet29 30 1000 29 +Ethernet30 31 1000 30 +Ethernet31 32 1000 31 +Ethernet32 33 1000 32 +Ethernet33 34 1000 33 +Ethernet34 35 1000 34 +Ethernet35 36 1000 35 +Ethernet36 37 1000 36 +Ethernet37 38 1000 37 +Ethernet38 39 1000 38 +Ethernet39 40 1000 39 +Ethernet40 41 1000 40 +Ethernet41 42 1000 41 +Ethernet42 43 1000 42 +Ethernet43 44 1000 43 +Ethernet44 45 1000 44 +Ethernet45 46 1000 45 +Ethernet46 47 1000 46 +Ethernet47 48 1000 47 +Ethernet48 54 10000 48 +Ethernet49 53 10000 49 diff --git a/device/delta/x86_64-delta_et-6248brb-r0/Delta-et-6248brb/sai.profile b/device/delta/x86_64-delta_et-6248brb-r0/Delta-et-6248brb/sai.profile new file mode 100644 index 000000000000..726e1b6dc667 --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/Delta-et-6248brb/sai.profile @@ -0,0 +1 @@ +SAI_INIT_CONFIG_FILE=/etc/bcm/helix4-et-6248brb-48x1G+2x10G.config.bcm diff --git a/device/delta/x86_64-delta_et-6248brb-r0/fancontrol b/device/delta/x86_64-delta_et-6248brb-r0/fancontrol new file mode 100644 index 000000000000..0deef5b88ef8 --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/fancontrol @@ -0,0 +1,12 @@ +INTERVAL=10 +DEVPATH=hwmon1=/sys/bus/i2c/devices +DEVNAME=hwmon1=adt7473 +FCTEMPS=hwmon1/0-0048/hwmon/hwmon*/temp1_input hwmon1/7-0049/hwmon/hwmon*/temp1_input hwmon1/8-004a/hwmon/hwmon*/temp1_input + +FCFANS=hwmon1/0-002e/fan1_input hwmon1/0-002e/fan2_input + +FCTARGETS=hwmon1/0-002e/pwm1 hwmon1/0-002e/pwm2 +MINTEMP=20 +MAXTEMP=60 +MINSTART=75 +MINSTOP=22 diff --git a/device/delta/x86_64-delta_et-6248brb-r0/fancontrol.service b/device/delta/x86_64-delta_et-6248brb-r0/fancontrol.service new file mode 100755 index 000000000000..3864d6d99663 --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/fancontrol.service @@ -0,0 +1,279 @@ +#!/bin/bash +# +# Simple script implementing a temperature dependent fan speed control +# Supported Linux kernel versions: 2.6.5 and later +# +# Version 0.70 +# +# Usage: fancontrol [CONFIGFILE] +# +# Dependencies: +# bash, egrep, sed, cut, sleep, readlink, lm_sensors :) +# +# Please send any questions, comments or success stories to +# marius.reiner@hdev.de +# Thanks! +# +# For configuration instructions and warnings please see fancontrol.txt, which +# can be found in the doc/ directory or at the website mentioned above. +# +# +# Copyright 2003 Marius Reiner +# Copyright (C) 2007-2009 Jean Delvare +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA. +# +# + +PIDFILE="/var/run/fancontrol.pid" + +#DEBUG=1 +MAX=255 + +function LoadConfig +{ + local fcvcount fcv + + echo "Loading configuration from $1 ..." + if [ ! -r "$1" ] + then + echo "Error: Can't read configuration file" >&2 + exit 1 + fi + + # grep configuration from file + INTERVAL=`egrep '^INTERVAL=.*$' $1 | sed -e 's/INTERVAL=//g'` + DEVPATH=`egrep '^DEVPATH=.*$' $1 | sed -e 's/DEVPATH= *//g'` + DEVNAME=`egrep '^DEVNAME=.*$' $1 | sed -e 's/DEVNAME= *//g'` + FCTEMPS=`egrep '^FCTEMPS=.*$' $1 | sed -e 's/FCTEMPS=//g'` + MINTEMP=`egrep '^MINTEMP=.*$' $1 | sed -e 's/MINTEMP=//g'` + MAXTEMP=`egrep '^MAXTEMP=.*$' $1 | sed -e 's/MAXTEMP=//g'` + MINSTART=`egrep '^MINSTART=.*$' $1 | sed -e 's/MINSTART=//g'` + MINSTOP=`egrep '^MINSTOP=.*$' $1 | sed -e 's/MINSTOP=//g'` + HWMON=$( echo "$DEVPATH" | sed 's/=.*$//g') + FCDEVPATH=$( echo "$DEVPATH" | sed 's/^.*=//g') + FCMINTEMP=$MINTEMP + FCMAXTEMP=$MAXTEMP + FCMINSTART=$MINSTART + FCMINSTOP=$MINSTOP + AFCTEMP_1_LOWER=(00 39 36 41 46 55) + AFCTEMP_1_UPPER=(39 39 44 49 54 150) + AFCTEMP_2_LOWER=(00 61 65 69 73 82) + AFCTEMP_2_UPPER=(63 67 71 75 79 150) + AFCTEMP_3_LOWER=(00 51 55 59 63 71) + AFCTEMP_3_UPPER=(53 57 61 65 69 150) + + + FCFANS=`egrep '^FCFANS=.*$' $1 | sed -e 's/FCFANS=//g'` + + FCTARGETS=`egrep '^FCTARGETS=.*$' $1 | sed -e 's/FCTARGETS=//g'` + + # Check whether all mandatory settings are set + if [[ -z ${INTERVAL} || -z ${FCTEMPS} || -z ${MINTEMP} || -z ${MAXTEMP} || -z ${MINSTART} || -z ${MINSTOP} ]] + then + echo "Some mandatory settings missing, please check your config file!" >&2 + exit 1 + fi + if [ "$INTERVAL" -le 0 ] + then + echo "Error in configuration file:" >&2 + echo "INTERVAL must be at least 1" >&2 + exit 1 + fi + + # write settings to arrays for easier use and print them + echo + echo "Common settings:" + + temp_string=$FCTEMPS + + let fcvcount=0 + for fcv in $FCTEMPS + do + fcvcount=$((fcvcount+1)) + AFCTEMP[$fcvcount]=$( echo "$temp_string" | cut -d" " -f $fcvcount ) + AFCTEMP[$fcvcount]=$( echo "${AFCTEMP[$fcvcount]}" | sed 's/hwmon1/\/sys\/bus\/i2c\/devices/g' ) + AFCTEMP_PATH[$fcvcount]=$( echo "${AFCTEMP[$fcvcount]}" | sed 's/hwmon1/\/sys\/bus\/i2c\/devices/g' ) + AFCTEMP[$fcvcount]=$( cat ${AFCTEMP[$fcvcount]} ) + AFCTEMP[$fcvcount]=$(( AFCTEMP[$fcvcount]/1000 )) + done + + fan_string=$FCFANS + fcvcount=0 + for fcv in $FCFANS + do + fcvcount=$((fcvcount+1)) + AFCFAN[$fcvcount]=$( echo "$fan_string" | cut -d" " -f $fcvcount ) + AFCFAN_PATH[$fcvcount]=$( echo "${AFCFAN[$fcvcount]}" | sed 's/hwmon1/\/sys\/bus\/i2c\/devices/g' ) + AFCFAN[$fcvcount]=$( cat ${AFCFAN_PATH[$fcvcount]} ) + done + + target_string=$FCTARGETS + fcvcount=0 + for fcv in $FCTARGETS + do + fcvcount=$((fcvcount+1)) + AFCTARGET[$fcvcount]=$( echo "$target_string" | cut -d" " -f $fcvcount ) + AFCFAN_TARGET[$fcvcount]=$( echo "${AFCTARGET[$fcvcount]}" | sed 's/hwmon1/\/sys\/bus\/i2c\/devices/g' ) + done + +} + +# Check that all referenced sysfs files exist +function CheckFiles +{ + local outdated=0 fcvcount tsen fan + if [ $outdated -eq 1 ] + then + echo >&2 + echo "At least one referenced file is missing. Either some required kernel" >&2 + echo "modules haven't been loaded, or your configuration file is outdated." >&2 + echo "In the latter case, you should run pwmconfig again." >&2 + fi + return $outdated +} + +LoadConfig $1 + +# Detect path to sensors +if [ ! -d $DIR ] +then + echo $0: 'No sensors found! (did you load the necessary modules?)' >&2 + exit 1 +fi +cd $DIR + +# Check for configuration change +if [ "$DIR" != "/" ] && [ -z "$DEVPATH" -o -z "$DEVNAME" ] +then + echo "Configuration is too old, please run pwmconfig again" >&2 + exit 1 +fi +if [ "$DIR" = "/" -a -n "$DEVPATH" ] +then + echo "Unneeded DEVPATH with absolute device paths" >&2 + exit 1 +fi +CheckFiles || exit 1 + +if [ -f "$PIDFILE" ] +then + echo "File $PIDFILE exists, is fancontrol already running?" >&2 + exit 1 +fi +echo $$ > "$PIDFILE" + +# main function +function UpdateThermalSensors +{ + fcvcount=0 + for fcv in $FCTEMPS + do + fcvcount=$((fcvcount+1)) + AFCTEMP[$fcvcount]=$( cat ${AFCTEMP_PATH[$fcvcount]} ) + AFCTEMP[$fcvcount]=$(( AFCTEMP[$fcvcount]/1000 )) + done +} + +function UpdateThermalLevel +{ + AFCTEMP_NUM=$((6-${AFCTEMP_LEVEL[$i]})) + AFCTEMP_UPPER_BUF=AFCTEMP_"$i"_UPPER["$AFCTEMP_NUM"] + AFCTEMP_LOWER_BUF=AFCTEMP_"$i"_LOWER["$AFCTEMP_NUM"] + + AFCTEMP_UPPER=${!AFCTEMP_UPPER_BUF} + AFCTEMP_LOWER=${!AFCTEMP_LOWER_BUF} + + + if (( ("${AFCTEMP[$i]}" <= "$AFCTEMP_UPPER") && ("${AFCTEMP[$i]}" >= "$AFCTEMP_LOWER") )) ; then + FLAG=2 + elif (( "${AFCTEMP[$i]}" > "$AFCTEMP_UPPER" )); then + AFCTEMP_LEVEL[$i]=$((${AFCTEMP_LEVEL[$i]} - 1)) + FLAG=1 + elif (( "${AFCTEMP[$i]}" < "$AFCTEMP_LOWER" )); then + AFCTEMP_LEVEL[$i]=$((${AFCTEMP_LEVEL[$i]} + 1)) + FLAG=1 + else + AFCTEMP_LEVEL[$i]=1 + FLAG=2 + fi +} + +function UpdateFanSpeeds +{ + #echo "num tmp lev F L H" + #Update level + for i in 1 2 3 + do + #echo "----------------------" + FLAG=0 + #FLAG=0 : initial flag + #FLAG=1 : update level + #FLAG=2 : final level + while [ $FLAG -ne 2 ] + do + UpdateThermalLevel + #echo " $i ${AFCTEMP[$i]} ${AFCTEMP_LEVEL[$i]} $FLAG $AFCTEMP_LOWER $AFCTEMP_UPPER " + done + done + + min=${AFCTEMP_LEVEL[0]} + for j in "${AFCTEMP_LEVEL[@]}"; do + (( j < min )) && min=$j + done + + if (($min == 1 || $min == 2)); then + FAN_PERCENTAGE=100 + elif (($min == 3)); then + FAN_PERCENTAGE=80 + elif (($min == 4)); then + FAN_PERCENTAGE=60 + elif (($min == 5)); then + FAN_PERCENTAGE=40 + elif (($min == 6)); then + FAN_PERCENTAGE=30 + else + FAN_PERCENTAGE=100 + fi + echo "The lowest level of thermal sensors: $min " + echo "Trying to set fan speed to $FAN_PERCENTAGE %" + #Set speed to fan1~fan10 + FAN_PERCENTAGE=`expr $FAN_PERCENTAGE \* 255 / 100` + let fcvcount=0 + for fcv in $FCFANS + do + fcvcount=$(( fcvcount + 1 )) + echo $FAN_PERCENTAGE > ${AFCFAN_TARGET[$fcvcount]} + AFCFAN[$fcvcount]=$( cat ${AFCFAN_PATH[$fcvcount]} ) + + echo "FAN fan$fcvcount = ${AFCFAN[$fcvcount]} (rpm)" + done + + rm -f "$PIDFILE" +} + +# main loop calling the main function at specified intervals +AFCTEMP_LEVEL=(9 4 4 4) #inttial level +while true +do + UpdateThermalSensors + UpdateFanSpeeds + echo "Sleep $INTERVAL seconds ..." + echo + # Sleep while still handling signals + sleep $INTERVAL & + wait $! +done diff --git a/device/delta/x86_64-delta_et-6248brb-r0/installer.conf b/device/delta/x86_64-delta_et-6248brb-r0/installer.conf new file mode 100644 index 000000000000..14404194ef53 --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/installer.conf @@ -0,0 +1,3 @@ +CONSOLE_PORT=0x2f8 +CONSOLE_DEV=1 +CONSOLE_SPEED=115200 diff --git a/device/delta/x86_64-delta_et-6248brb-r0/led_proc_init.soc b/device/delta/x86_64-delta_et-6248brb-r0/led_proc_init.soc new file mode 100644 index 000000000000..ebc8f238a332 --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/led_proc_init.soc @@ -0,0 +1,46 @@ +#ET_6248BRB Port_Remap +# Vlan set and port enable +clear c +port ge en=1 +port hg en=1 + +# led0 port order remap +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_0=0 REMAP_PORT_1=1 REMAP_PORT_2=2 REMAP_PORT_3=3 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_4=4 REMAP_PORT_5=5 REMAP_PORT_6=6 REMAP_PORT_7=7 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_8=51 REMAP_PORT_9=50 REMAP_PORT_10=49 REMAP_PORT_11=48 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_12=47 REMAP_PORT_13=46 REMAP_PORT_14=45 REMAP_PORT_15=44 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_16=43 REMAP_PORT_17=42 REMAP_PORT_18=41 REMAP_PORT_19=40 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_20=39 REMAP_PORT_21=38 REMAP_PORT_22=37 REMAP_PORT_23=36 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_24=35 REMAP_PORT_25=34 REMAP_PORT_26=33 REMAP_PORT_27=32 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_28=31 REMAP_PORT_29=30 REMAP_PORT_30=29 REMAP_PORT_31=28 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_32=27 REMAP_PORT_33=26 REMAP_PORT_34=25 REMAP_PORT_35=24 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_36=23 REMAP_PORT_37=22 REMAP_PORT_38=21 REMAP_PORT_39=20 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_40=19 REMAP_PORT_41=18 REMAP_PORT_42=17 REMAP_PORT_43=16 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_44=15 REMAP_PORT_45=14 REMAP_PORT_46=13 REMAP_PORT_47=12 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_48=11 REMAP_PORT_49=10 REMAP_PORT_50=9 REMAP_PORT_51=8 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_52=7 REMAP_PORT_53=6 REMAP_PORT_54=5 REMAP_PORT_55=4 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_56=3 REMAP_PORT_57=2 REMAP_PORT_58=1 REMAP_PORT_59=0 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_60=60 REMAP_PORT_61=61 REMAP_PORT_62=62 REMAP_PORT_63=63 + +echo "ET_6248BRB LED Port Remap: Done." + +#ET_6248BRB_LED + +#-------------------------------------------------------------------------------------------------- +#LED Auto link/up + +led stop +led prog '\ + 02 00 60 E0 02 A0 60 E2 86 E6 02 00 60 E1 06 E0\ + D2 30 75 28 02 00 2E E0 32 08 97 71 1F 77 44 2E\ + E0 32 04 97 71 3C 77 40 02 00 2E E0 32 08 97 71\ + 33 77 44 2E E0 32 03 97 71 3C 77 40 02 02 77 44\ + 02 04 77 44 60 E3 2E E0 32 00 32 01 B7 97 02 00\ + 0E 00 12 E4 FE E1 50 12 E4 05 60 E5 12 E3 05 0A\ + 02 71 67 67 9A 77 69 67 86 12 E3 05 0A 01 71 74\ + 67 9A 77 76 67 86 06 E2 F2 01 60 E2 86 E0 06 E0\ + D2 34 74 0A 3A 68 06 E5 D2 00 70 96 16 E6 99 99\ + 1A 00 71 96 77 9A 32 0F 87 57 32 0E 87 57 00 00\ +' +led auto on +led start diff --git a/device/delta/x86_64-delta_et-6248brb-r0/minigraph.xml b/device/delta/x86_64-delta_et-6248brb-r0/minigraph.xml new file mode 100644 index 000000000000..98318a862591 --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/minigraph.xml @@ -0,0 +1,766 @@ + + + + + + ARISTA01T1 + 10.0.0.1 + sonic + 10.0.0.0 + 1 + 180 + 60 + + + ARISTA02T1 + 10.0.0.5 + sonic + 10.0.0.4 + 1 + 180 + 60 + + + ARISTA03T1 + 10.0.0.9 + sonic + 10.0.0.8 + 1 + 180 + 60 + + + ARISTA04T1 + 10.0.0.13 + sonic + 10.0.0.12 + 1 + 180 + 60 + + + ARISTA01T1 + FC00::2 + sonic + FC00::1 + 1 + 180 + 60 + + + ARISTA02T1 + FC00::A + sonic + FC00::9 + 1 + 180 + 60 + + + ARISTA03T1 + FC00::12 + sonic + FC00::11 + 1 + 180 + 60 + + + ARISTA04T1 + FC00::1A + sonic + FC00::19 + 1 + 180 + 60 + + + + + 64601 + sonic + + + BGPPeer +
10.0.0.1
+ + + + + + BGPPeer +
10.0.0.5
+ + + + + + BGPPeer +
10.0.0.9
+ + + + + + BGPPeer +
10.0.0.13
+ + + + + + BGPPeer +
FC00::2
+ + + + + + BGPPeer +
FC00::A
+ + + + + + BGPPeer +
FC00::12
+ + + + + + BGPPeer +
FC00::1A
+ + + + + + + + + 64802 + ARISTA01T1 + + + + 64802 + ARISTA02T1 + + + + 64802 + ARISTA03T1 + + + + 64802 + ARISTA04T1 + + + + + + + + + + HostIP + Loopback0 + + 10.1.0.32/32 + + 10.1.0.32/32 + + + HostIP1 + Loopback0 + + FC00:1::32/128 + + FC00:1::32/128 + + + + + HostIP + eth0 + + 10.251.0.243/23 + + 10.251.0.243/23 + + + + + + sonic + + + + VlanInterface + Vlan2 + Ethernet0;Ethernet1;Ethernet2;Ethernet3;Ethernet4;Ethernet5;Ethernet6;Ethernet7;Ethernet8;Ethernet9;Ethernet10;Ethernet11;Ethernet12;Ethernet13;Ethernet14;Ethernet15;Ethernet16;Ethernet17;Ethernet18;Ethernet19;Ethernet20;Ethernet21;Ethernet22;Ethernet23;Ethernet24;Ethernet25;Ethernet26;Ethernet27;Ethernet28;Ethernet29;Ethernet30;Ethernet31;Ethernet32;Ethernet33;Ethernet34;Ethernet35;Ethernet36;Ethernet37;Ethernet38;Ethernet39;Ethernet40;Ethernet41;Ethernet42;Ethernet43;Ethernet44;Ethernet45;Ethernet46;Ethernet47 + False + 0.0.0.0/0 + + 2 + 2 + 172.0.0.0/26 + + + + + IPInterface + + Ethernet48 + 10.0.0.0/31 + + + IPInterface + + Ethernet49 + 10.0.0.4/31 + + + IPInterface + + Ethernet48 + FC00::1/126 + + + IPInterface + + Ethernet49 + FC00::9/126 + + + IPInterface + + Vlan2 + 172.0.0.1/26 + + + + + + + + + + + + DeviceInterfaceLink + true + 10000 + ARISTA01T1 + Ethernet1 + true + sonic + Ethernet48 + + + DeviceInterfaceLink + true + 10000 + ARISTA02T1 + Ethernet1 + true + sonic + Ethernet49 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet0 + true + server-01 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet1 + true + server-02 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet2 + true + server-03 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet3 + true + server-04 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet4 + true + server-05 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet5 + true + server-06 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet6 + true + server-07 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet7 + true + server-08 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet8 + true + server-09 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet9 + true + server-10 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet10 + true + server-11 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet11 + true + server-12 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet12 + true + server-13 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet13 + true + server-14 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet14 + true + server-15 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet15 + true + server-16 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet16 + true + server-17 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet17 + true + server-18 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet18 + true + server-19 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet19 + true + server-20 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet20 + true + server-21 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet21 + true + server-22 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet22 + true + server-23 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet23 + true + server-24 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet24 + true + server-25 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet25 + true + server-26 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet26 + true + server-27 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet27 + true + server-28 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet28 + true + server-29 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet29 + true + server-30 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet30 + true + server-31 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet31 + true + server-32 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet32 + true + server-33 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet33 + true + server-34 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet34 + true + server-35 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet35 + true + server-36 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet36 + true + server-37 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet37 + true + server-38 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet38 + true + server-39 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet39 + true + server-40 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet40 + true + server-41 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet41 + true + server-42 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet42 + true + server-43 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet43 + true + server-44 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet44 + true + server-45 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet45 + true + server-46 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet46 + true + server-47 + 0 + + + DeviceInterfaceLink + true + 1000 + sonic + Ethernet47 + true + server-48 + 0 + + + + + sonic + Delta-et-6248brb + + 10.251.0.243 + + + + + sonic + Delta-et-6248brb + diff --git a/device/delta/x86_64-delta_et-6248brb-r0/plugins/eeprom.py b/device/delta/x86_64-delta_et-6248brb-r0/plugins/eeprom.py new file mode 100644 index 000000000000..11c9285f47db --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/plugins/eeprom.py @@ -0,0 +1,32 @@ +#!/usr/bin/env python + +############################################################################# +# Mellanox +# +# Platform and model specific eeprom subclass, inherits from the base class, +# and provides the followings: +# - the eeprom format definition +# - specific encoder/decoder if there is special need +############################################################################# + +try: + import exceptions + import binascii + import time + import optparse + import warnings + import os + import sys + from sonic_eeprom import eeprom_base + from sonic_eeprom import eeprom_tlvinfo + import subprocess +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + +class board(eeprom_tlvinfo.TlvInfoDecoder): + + _TLV_INFO_MAX_LEN = 256 + + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/sys/devices/pci0000:00/0000:00:13.0/i2c-1/1-0054/eeprom" + super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/delta/x86_64-delta_et-6248brb-r0/plugins/psuutil.py b/device/delta/x86_64-delta_et-6248brb-r0/plugins/psuutil.py new file mode 100644 index 000000000000..99e8f1d17dd8 --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/plugins/psuutil.py @@ -0,0 +1,55 @@ +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError (str(e) + "- required module not found") + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + def __init__(self): + PsuBase.__init__(self) + + self.psu_path = "/sys/devices/platform/delta-et6248brb-gpio.0/PSU/psu{}_pg" + self.psu_oper_status = "in1_input" + self.psu_presence = "/sys/devices/platform/delta-et6248brb-gpio.0/PSU/psu{}_pres" + + + def get_num_psus(self): + """ + Retrieves the number of PSUs available on the device + + :return: An integer, the number of PSUs available on the device + """ + return 2 + + def get_psu_status(self, index): + if index is None: + return False + + try: + reg_file = open(self.psu_path.format(index)) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + if int(reg_file.readline()) == 1: + return True + + return False + + def get_psu_presence(self, index): + if index is None: + return False + + try: + reg_file = open(self.psu_presence.format(index)) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + if int(reg_file.readline()) == 0: + return True + + return False diff --git a/device/delta/x86_64-delta_et-6248brb-r0/plugins/sfputil.py b/device/delta/x86_64-delta_et-6248brb-r0/plugins/sfputil.py new file mode 100644 index 000000000000..ac2b84bcbca5 --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/plugins/sfputil.py @@ -0,0 +1,88 @@ +# sfputil.py +# +# Platform-specific SFP transceiver interface for SONiC +# + +try: + import time + from sonic_sfp.sfputilbase import SfpUtilBase +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + + PORT_START = 48 + PORT_END = 49 + PORTS_IN_BLOCK = 1 + + EEPROM_OFFSET = 44 + + _port_to_eeprom_mapping = {} + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_ports(self): + return range(0) + + @property + def port_to_eeprom_mapping(self): + return self._port_to_eeprom_mapping + + def __init__(self): + eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom" + + for x in range(0, self.port_end + 1): + if x >= self.port_start and x <= self.port_end: + self._port_to_eeprom_mapping[x] = eeprom_path.format(x - self.EEPROM_OFFSET) + else: + self._port_to_eeprom_mapping[x] = eeprom_path.format(x - x) + + SfpUtilBase.__init__(self) + + def get_presence(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + presence_path = "/sys/devices/platform/delta-et6248brb-gpio.0/SFP/sfp_mod_p{}" + + try: + reg_file = open(presence_path.format(port_num - 47)) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + if int(reg_file.readline()) == 0: + return True + + return False + + def get_low_power_mode(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + return False + + def set_low_power_mode(self, port_num, lpmode): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + return False + + def reset(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + return False diff --git a/device/delta/x86_64-delta_et-6248brb-r0/sensors.conf b/device/delta/x86_64-delta_et-6248brb-r0/sensors.conf new file mode 100644 index 000000000000..f388bd71ecbe --- /dev/null +++ b/device/delta/x86_64-delta_et-6248brb-r0/sensors.conf @@ -0,0 +1,15 @@ +# libsensors configuration file for et-6248brb +# ------------------------------------------------ + +chip "tmp75-i2c-0-48" + label temp1 "0-0048 thermal sensor" +chip "tmp75-i2c-7-49" + label temp1 "7-0048 thermal sensor" +chip "tmp75-i2c-8-4a" + label temp1 "8-004a thermal sensor" + +chip "adt7473-i2c-0-2e" + label fan1 "FANTRAY 1" + label fan2 "FANTRAY 2" + + diff --git a/platform/broadcom/one-image.mk b/platform/broadcom/one-image.mk index 001d7486101e..b009706a7850 100755 --- a/platform/broadcom/one-image.mk +++ b/platform/broadcom/one-image.mk @@ -25,6 +25,7 @@ $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(DELL_S6000_PLATFORM_MODULE) \ $(DELTA_AG9032V1_PLATFORM_MODULE) \ $(DELTA_AG9064_PLATFORM_MODULE) \ $(DELTA_AG5648_PLATFORM_MODULE) \ + $(DELTA_ET6248BRB_PLATFORM_MODULE) \ $(QUANTA_IX1B_32X_PLATFORM_MODULE) \ $(MITAC_LY1200_32X_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_DOCKERS += $(SONIC_INSTALL_DOCKER_IMAGES) diff --git a/platform/broadcom/platform-modules-delta.mk b/platform/broadcom/platform-modules-delta.mk index bc5bf91fd90b..5e6137e74ac5 100644 --- a/platform/broadcom/platform-modules-delta.mk +++ b/platform/broadcom/platform-modules-delta.mk @@ -3,10 +3,12 @@ DELTA_AG9032V1_PLATFORM_MODULE_VERSION = 1.1 DELTA_AG9064_PLATFORM_MODULE_VERSION = 1.1 DELTA_AG5648_PLATFORM_MODULE_VERSION = 1.1 +DELTA_ET6248BRB_PLATFORM_MODULE_VERSION = 1.1 export DELTA_AG9032V1_PLATFORM_MODULE_VERSION export DELTA_AG9064_PLATFORM_MODULE_VERSION export DELTA_AG5648_PLATFORM_MODULE_VERSION +export DELTA_ET6248BRB_PLATFORM_MODULE_VERSION DELTA_AG9032V1_PLATFORM_MODULE = platform-modules-ag9032v1_$(DELTA_AG9032V1_PLATFORM_MODULE_VERSION)_amd64.deb $(DELTA_AG9032V1_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-delta @@ -22,4 +24,8 @@ DELTA_AG5648_PLATFORM_MODULE = platform-modules-ag5648_$(DELTA_AG5648_PLATFORM_M $(DELTA_AG5648_PLATFORM_MODULE)_PLATFORM = x86_64-delta_ag5648-r0 $(eval $(call add_extra_package,$(DELTA_AG9032V1_PLATFORM_MODULE),$(DELTA_AG5648_PLATFORM_MODULE))) +DELTA_ET6248BRB_PLATFORM_MODULE = platform-modules-et-6248brb_$(DELTA_ET6248BRB_PLATFORM_MODULE_VERSION)_amd64.deb +$(DELTA_ET6248BRB_PLATFORM_MODULE)_PLATFORM = x86_64-delta_et-6248brb-r0 +$(eval $(call add_extra_package,$(DELTA_AG9032V1_PLATFORM_MODULE),$(DELTA_ET6248BRB_PLATFORM_MODULE))) + SONIC_STRETCH_DEBS += $(DELTA_AG9032V1_PLATFORM_MODULE) diff --git a/platform/broadcom/sonic-platform-modules-delta/ag5648/modules/dni_ag5648_psu.c b/platform/broadcom/sonic-platform-modules-delta/ag5648/modules/dni_ag5648_psu.c index 185ba2222b91..d7e8a3bf8e7c 100644 --- a/platform/broadcom/sonic-platform-modules-delta/ag5648/modules/dni_ag5648_psu.c +++ b/platform/broadcom/sonic-platform-modules-delta/ag5648/modules/dni_ag5648_psu.c @@ -421,7 +421,7 @@ static SENSOR_DEVICE_ATTR(temp1_input, \ S_IRUGO, for_linear_data, NULL, PSU_TEMP1_INPUT); static SENSOR_DEVICE_ATTR(fan1_target, \ S_IRUGO, for_fan_target, NULL, PSU_FAN1_FAULT); -static SENSOR_DEVICE_ATTR(fan1_set_percentage, S_IWUGO | S_IRUGO, \ +static SENSOR_DEVICE_ATTR(fan1_set_percentage, S_IWUSR | S_IRUGO, \ for_linear_data, set_fan_duty_cycle_input, PSU_FAN1_DUTY_CYCLE); static SENSOR_DEVICE_ATTR(fan1_input, \ S_IRUGO, for_linear_data, NULL, PSU_FAN1_SPEED); diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/control b/platform/broadcom/sonic-platform-modules-delta/debian/control index bb543a5a70ae..9b0119dbe042 100644 --- a/platform/broadcom/sonic-platform-modules-delta/debian/control +++ b/platform/broadcom/sonic-platform-modules-delta/debian/control @@ -17,5 +17,11 @@ Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-ag5648 Architecture: amd64 -Depends: linux-image-3.16.0-5-amd64 +Depends: linux-image-4.9.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: platform-modules-et-6248brb +Architecture: amd64 +Depends: linux-image-4.9.0-5-amd64 Description: kernel modules for platform devices such as fan, led, sfp + diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag5648.install b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag5648.install index 15f218eea12d..06d536770167 100644 --- a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag5648.install +++ b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-ag5648.install @@ -1,3 +1,4 @@ ag5648/scripts/ag5648_platform_init.sh usr/local/bin ag5648/cfg/ag5648-modules.conf etc/modules-load.d ag5648/scripts/led_control usr/local/bin +systemd/platform-modules-ag5648.service lib/systemd/system diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.init b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.init new file mode 100755 index 000000000000..e314a528a6e9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.init @@ -0,0 +1,80 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup et-6248brb board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + depmod -a + rmmod i2c-i801 + rmmod i2c-ismt + modprobe i2c-dev + modprobe i2c-i801 + modprobe i2c-ismt + modprobe i2c-mux-pca954x + modprobe i2c-mux-gpio + modprobe dni_gpio + modprobe delta_et-6248brb_platform + + if [ `uname -a | awk '{print $3}'` = "4.9.0-5-amd64" ]; then + echo "453" > "/sys/class/gpio/export" + echo "454" > "/sys/class/gpio/export" + echo "455" > "/sys/class/gpio/export" + echo "485" > "/sys/class/gpio/export" + echo "489" > "/sys/class/gpio/export" + echo "494" > "/sys/class/gpio/export" + echo "out" > "/sys/class/gpio/gpio453/direction" + echo "out" > "/sys/class/gpio/gpio454/direction" + echo "out" > "/sys/class/gpio/gpio455/direction" + echo "out" > "/sys/class/gpio/gpio485/direction" + echo "out" > "/sys/class/gpio/gpio489/direction" + echo "out" > "/sys/class/gpio/gpio494/direction" + else + echo "197" > "/sys/class/gpio/export" + echo "198" > "/sys/class/gpio/export" + echo "199" > "/sys/class/gpio/export" + echo "229" > "/sys/class/gpio/export" + echo "233" > "/sys/class/gpio/export" + echo "238" > "/sys/class/gpio/export" + echo "out" > "/sys/class/gpio/gpio197/direction" + echo "out" > "/sys/class/gpio/gpio198/direction" + echo "out" > "/sys/class/gpio/gpio199/direction" + echo "out" > "/sys/class/gpio/gpio229/direction" + echo "out" > "/sys/class/gpio/gpio233/direction" + echo "out" > "/sys/class/gpio/gpio238/direction" + fi + + /usr/local/bin/et-6248brb_platform_init.sh + + sleep 1 + echo "Ethernet48" > "/sys/bus/i2c/devices/4-0050/port_name" + echo "Ethernet49" > "/sys/bus/i2c/devices/5-0050/port_name" + + echo "done." + ;; + +stop) + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/platform-modules-et-6248brb.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.install b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.install new file mode 100644 index 000000000000..936c43679d5c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.install @@ -0,0 +1,4 @@ +et-6248brb/scripts/et-6248brb_platform_init.sh usr/local/bin +et-6248brb/cfg/et-6248brb-modules.conf etc/modules-load.d +et-6248brb/scripts/led_status.sh usr/local/bin +systemd/platform-modules-et-6248brb.service lib/systemd/system diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/rules b/platform/broadcom/sonic-platform-modules-delta/debian/rules index 58a3597e7a44..63949e3a5399 100755 --- a/platform/broadcom/sonic-platform-modules-delta/debian/rules +++ b/platform/broadcom/sonic-platform-modules-delta/debian/rules @@ -5,7 +5,7 @@ export INSTALL_MOD_DIR:=extra KVERSION ?= $(shell uname -r) KERNEL_SRC := /lib/modules/$(KVERSION) MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= ag9032v1 +MODULE_DIRS:= ag9032v1 ag9064 ag5648 et-6248brb %: dh $@ --with=systemd diff --git a/platform/broadcom/sonic-platform-modules-delta/et-6248brb/cfg/et-6248brb-modules.conf b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/cfg/et-6248brb-modules.conf new file mode 100644 index 000000000000..552b4103ed02 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/cfg/et-6248brb-modules.conf @@ -0,0 +1,13 @@ +# /etc/modules: kernel modules to load at boot time. +# +# This file contains the names of kernel modules that should be loaded +# at boot time, one per line. Lines beginning with "#" are ignored. + +i2c-i801 +i2c-isch +i2c-ismt +i2c-dev +i2c-mux +i2c-smbus +i2c-mux-gpio +i2c-mux-pca954x diff --git a/platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/Makefile b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/Makefile new file mode 100644 index 000000000000..fb5b18ed5b4c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := delta_et-6248brb_platform.o dni_gpio.o + diff --git a/platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/delta_et-6248brb_platform.c b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/delta_et-6248brb_platform.c new file mode 100644 index 000000000000..fc5ecf320033 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/delta_et-6248brb_platform.c @@ -0,0 +1,918 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define OPTOE_INFO(data) \ + .type = "optoe2", .addr = 0x50 + +#define et6248brb_i2c_device_num(NUM){ \ + .name = "delta-et6248brb-i2c-device", \ + .id = NUM, \ + .dev = { \ + .platform_data = &et6248brb_i2c_device_platform_data[NUM], \ + .release = device_release, \ + }, \ +} + +#define et6248brb_gpio_num(NUM){ \ + .name = "delta-et6248brb-gpio", \ + .id = NUM, \ + .dev = { \ + .platform_data = &et6248brb_gpio_device_platform_data[NUM], \ + .release = device_release, \ + }, \ +} + +#define PCA9555_A 0x20 +#define PCA9555_B 0x21 +#define PCA9555_C 0x23 + +static struct kobject *kobj_gpio; +static struct kobject *kobj_psu; +static struct kobject *kobj_fan; +static struct kobject *kobj_sfp; +static struct kobject *kobj_others; + +/*Define struct to get client of i2c_new_deivce */ +struct i2c_client * i2c_client_9547; + +enum{ + BUS0 = 0, + BUS1, + BUS2, + BUS3, + BUS4, + BUS5, + BUS6, + BUS7, + BUS8, + BUS9, + BUS10, +}; + +/*---------------- I2C device - start ------------- */ +static void device_release(struct device *dev) +{ + return; +} + +struct i2c_device_platform_data { + int parent; + struct i2c_board_info info; + struct i2c_client *client; +}; +/* pca9547 - add 8 bus */ +static struct pca954x_platform_mode pca954x_mode[] = { + { .adap_id = 2, + .deselect_on_exit = 1, + }, + { .adap_id = 3, + .deselect_on_exit = 1, + }, + { .adap_id = 4, + .deselect_on_exit = 1, + }, + { .adap_id = 5, + .deselect_on_exit = 1, + }, + { .adap_id = 6, + .deselect_on_exit = 1, + }, + { .adap_id = 7, + .deselect_on_exit = 1, + }, + { .adap_id = 8, + .deselect_on_exit = 1, + }, + { .adap_id = 9, + .deselect_on_exit = 1, + }, +}; + +static struct pca954x_platform_data pca954x_data = { + .modes = pca954x_mode, + .num_modes = ARRAY_SIZE(pca954x_mode), +}; + +static struct i2c_board_info __initdata i2c_info_pca9547[] = +{ + { + I2C_BOARD_INFO("pca9547", 0x71), + .platform_data = &pca954x_data, + }, +}; + +static struct i2c_device_platform_data et6248brb_i2c_device_platform_data[] = { + { + /* FAN controller (0x2e) */ + .parent = 0, + .info = { I2C_BOARD_INFO("adt7473", 0x2e) }, + .client = NULL, + }, + { + /* tmp75 (0x48) */ + .parent = 0, + .info = { I2C_BOARD_INFO("tmp75", 0x48) }, + .client = NULL, + }, + { + /* EEPROM (0x54) */ + .parent = 1, + .info = { I2C_BOARD_INFO("24c08", 0x54) }, + .client = NULL, + }, + { + /* sfp 1 (0x50) */ + .parent = 4, + .info = { OPTOE_INFO() }, + .client = NULL, + }, + { + /* sfp 2 (0x50) */ + .parent = 5, + .info = { OPTOE_INFO() }, + .client = NULL, + }, + { + /* tmp75 (0x49) */ + .parent = 7, + .info = { I2C_BOARD_INFO("tmp75", 0x49) }, + .client = NULL, + }, + { + /* tmp75 (0x4a) */ + .parent = 8, + .info = { I2C_BOARD_INFO("tmp75", 0x4a) }, + .client = NULL, + }, +}; + +static struct platform_device et6248brb_i2c_device[] = { + et6248brb_i2c_device_num(0), + et6248brb_i2c_device_num(1), + et6248brb_i2c_device_num(2), + et6248brb_i2c_device_num(3), + et6248brb_i2c_device_num(4), + et6248brb_i2c_device_num(5), + et6248brb_i2c_device_num(6), +}; + +/*---------------- I2C device - end ------------- */ +/*---------------- I2C driver - start ------------- */ +static int __init i2c_device_probe(struct platform_device *pdev) +{ + struct i2c_device_platform_data *pdata; + struct i2c_adapter *parent; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", + pdata->parent); + return -ENODEV; + } + + pdata->client = i2c_new_device(parent, &pdata->info); + if (!pdata->client) { + dev_err(&pdev->dev, "Failed to create i2c client %s at %d\n", + pdata->info.type, pdata->parent); + return -ENODEV; + } + + return 0; +} + +static int __exit i2c_deivce_remove(struct platform_device *pdev) +{ + struct i2c_adapter *parent; + struct i2c_device_platform_data *pdata; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + if (pdata->client) { + parent = (pdata->client)->adapter; + i2c_unregister_device(pdata->client); + i2c_put_adapter(parent); + } + + return 0; +} +static struct platform_driver i2c_device_driver = { + .probe = i2c_device_probe, + .remove = __exit_p(i2c_deivce_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-et6248brb-i2c-device", + } +}; +/*---------------- I2C driver - end ------------- */ + +/*---------------- gpio device - start ----------- */ +static struct pca953x_platform_data pca9555_data_0 = { + .gpio_base = 200, +}; +static struct pca953x_platform_data pca9555_data_1 = { + .gpio_base = 216, +}; +static struct pca953x_platform_data pca9555_data_2 = { + .gpio_base = 232, +}; + +static struct i2c_board_info __initdata i2c_info_pca9555[] = +{ + { + I2C_BOARD_INFO("pca9555", 0x20), + .platform_data = &pca9555_data_0, + }, + { + I2C_BOARD_INFO("pca9555", 0x21), + .platform_data = &pca9555_data_1, + }, + { + I2C_BOARD_INFO("pca9555", 0x23), + .platform_data = &pca9555_data_2, + }, +}; + +static struct i2c_device_platform_data et6248brb_gpio_device_platform_data[] = { + { + /* GPIO expander A (0x20) */ + .parent = 0, + .info = { I2C_BOARD_INFO("pca9555", 0x20) }, + .client = NULL, + }, + { + /* GPIO expander B (0x21) */ + .parent = 0, + .info = { I2C_BOARD_INFO("pca9555", 0x21) }, + .client = NULL, + }, + { + /* GPIO expander C (0x23) */ + .parent = 0, + .info = { I2C_BOARD_INFO("pca9555", 0x23) }, + .client = NULL, + }, +}; + +static struct platform_device et6248brb_gpio_device[] = { + et6248brb_gpio_num(0), + et6248brb_gpio_num(1), + et6248brb_gpio_num(2), +}; + +static struct gpio_attribute_data { + uint8_t bus; + uint8_t addr; + uint8_t reg; + uint8_t mask; + char note[150]; +}; + +enum gpio_attributes { + PSU1_SMB_ALERT, + PSU2_SMB_ALERT, + EEPROM_WP, + FAN1_LED_AG, + FAN2_LED_AG, + D_FAN_ALERT, + PSU1_PRES, + PSU2_PRES, + FAN_EEPROM_WP, + D_FAN_M_PRESENT2, + D_FAN_M_PRESENT1, + PSU1_PG, + PSU2_PG, + BCM54282_INT, + SFP_MOD_P1, + SFP_RXLOS_P1, + SFP_MOD_P2, + SFP_RXLOS_P2, + SFP_TX_FAULT_P1, + SFP_TX_FAULT_P2, + SFP_TX_DIS_P1, + SFP_TX_DIS_P2, + OOB_BCM54616S_INT, +}; + +static struct gpio_attribute_data attribute_data[] = { +//PCA9555_A + [PSU1_SMB_ALERT] = { + .bus = BUS0, .addr = PCA9555_A, + .reg = 0x00, .mask = 1 << 0, + .note = "0=PSU1 interrupt is occurr\n1=PSU1 interrupt is NOT occurr" + }, + [PSU2_SMB_ALERT] = { + .bus = BUS0, .addr = PCA9555_A, + .reg = 0x00, .mask = 1 << 3, + .note = "0=PSU2 interrupt is occurr\n1=PSU2 interrupt is NOT occurr" + }, + [EEPROM_WP] = { + .bus = BUS0, .addr = PCA9555_A, + .reg = 0x03, .mask = 1 << 3, + .note = "0=SYS eeprom write protect is disable\n1=SYS eeprom write protect is enable and can not be programmed" + + }, + [FAN1_LED_AG] = { + .bus = BUS0, .addr = PCA9555_A, + .reg = 0x03, .mask = 0x30, + .note = "00=LED off or FAN tray1 is not present\n01=LED Red,FAN tray1 fail\n10=LED Green,FAN tray1 is present\n11=reserved" + }, + [FAN2_LED_AG] = { + .bus = BUS0, .addr = PCA9555_A, + .reg = 0x03, .mask = 0xc0, + .note = "00=LED off or FAN tray1 is not present\n01=LED Red,FAN tray1 fail\n10=LED Green,FAN tray1 is present\n11=reserved" + }, +//PCA9555_B + [D_FAN_ALERT] = { + .bus = BUS0, .addr = PCA9555_B, + .reg = 0x00, .mask = 1 << 0, + .note ="0=FAN is NOT issue the alram\n1=FAN issue the alarm" + + }, + [PSU1_PRES] = { + .bus = BUS0, .addr = PCA9555_B, + .reg = 0x00, .mask = 1 << 2, + .note ="0=PSU1 is present\n1=PSU1 is NOT present" + }, + [PSU2_PRES] = { + .bus = BUS0, .addr = PCA9555_B, + .reg = 0x00, .mask = 1 << 3, + .note ="0=PSU2 is present\n1=PSU2 is NOT present" + }, + [FAN_EEPROM_WP] = { + .bus = BUS0, .addr = PCA9555_B, + .reg = 0x01, .mask = 1 << 1, + .note ="0=FAN eeprom write protect is disable\n1=FAN eeprom write protect is enable and can not be programmed" + }, + [D_FAN_M_PRESENT2] = { + .bus = BUS0, .addr = PCA9555_B, + .reg = 0x01, .mask = 1 << 2, + .note ="0=FAN2 module is present\n1=FAN2 module is NOT present" + }, + [D_FAN_M_PRESENT1] = { + .bus = BUS0, .addr = PCA9555_B, + .reg = 0x01, .mask = 1 << 3, + .note ="0=FAN1 moduel is present\n1=FAN1 module is NOT present" + }, + [PSU1_PG] = { + .bus = BUS0, .addr = PCA9555_B, + .reg = 0x01, .mask = 1 << 4, + .note ="0=PSU1 is FAIL or not present\n1=PSU1 is GOOD" + }, + [PSU2_PG] = { + .bus = BUS0, .addr = PCA9555_B, + .reg = 0x01, .mask = 1 << 5, + .note ="0=PSU2 is FAIL or not present\n1=PSU2 is GOOD" + }, + [BCM54282_INT] = { + .bus = BUS0, .addr = PCA9555_B, + .reg = 0x01, .mask = 1 << 6, + .note ="0=BCM54282 PHY interrupt occurrs\n1=BCM54282 PHY interrupt is not occurrs" + }, +//PCA9555_C + [SFP_MOD_P1] = { + .bus = BUS0, .addr = PCA9555_C, + .reg = 0x00, .mask = 1 << 0, + .note ="0=SFP1 transceiver is present\n1=SFP1 transceiver is NOT present" + }, + [SFP_RXLOS_P1] = { + .bus = BUS0, .addr = PCA9555_C, + .reg = 0x00, .mask = 1 << 1, + .note ="0=SFP1 transceiver is NOT asserted Loss of signal\n1=SFP1 transceiver is asserted Loss of signal" + }, + [SFP_MOD_P2] = { + .bus = BUS0, .addr = PCA9555_C, + .reg = 0x00, .mask = 1 << 2, + .note ="0=SFP1 transceiver is present\n1=SFP1 transceiver is NOT present" + }, + [SFP_RXLOS_P2] = { + .bus = BUS0, .addr = PCA9555_C, + .reg = 0x00, .mask = 1 << 3, + .note ="0=SFP1 transceiver is NOT asserted Loss of signal\n1=SFP1 transceiver is asserted Loss of signal" + }, + [SFP_TX_FAULT_P1] = { + .bus = BUS0, .addr = PCA9555_C, + .reg = 0x00, .mask = 1 << 4, + .note ="0=SFP1 transceiver is NOT asserted TXFAULT signal\n1=SFP1 transceiver is asserted TXFAULT signal" + }, + [SFP_TX_FAULT_P2] = { + .bus = BUS0, .addr = PCA9555_C, + .reg = 0x00, .mask = 1 << 5, + .note ="0=SFP1 transceiver is NOT asserted TXFAULT signal\n1=SFP1 transceiver is asserted TXFAULT signal" + }, + [SFP_TX_DIS_P1] = { + .bus = BUS0, .addr = PCA9555_C, + .reg = 0x02, .mask = 1 << 6, + .note ="0=SFP1 transceiver is turn ON\n1=SFP1 transceiver is turn OFF" + }, + [SFP_TX_DIS_P2] = { + .bus = BUS0, .addr = PCA9555_C, + .reg = 0x02, .mask = 1 << 7, + .note ="0=SFP2 transceiver is turn ON\n1=SFP2 transceiver is turn OFF" + }, + [OOB_BCM54616S_INT] = { + .bus = BUS0, .addr = PCA9555_C, + .reg = 0x01, .mask = 1 << 3, + .note ="0=BCM54616S PHY interrupt occurrs\n1=BCM54616S PHY interrupt is not occurrs" + }, +}; + +unsigned char dni_log2 (unsigned char num){ + unsigned char num_log2 = 0; + while(num > 0){ + num = num >> 1; + num_log2 += 1; + } + return num_log2 -1; +} + +void set_direction(struct i2c_device_platform_data *pdata, unsigned char reg, unsigned char mask){ + + int value; + int read_only; + unsigned char mask_out; + unsigned char set_data; + + read_only = 1; //Configuration:GPI + if (reg > 0x1){ + reg = reg - 0x02; + read_only = 0; //Configuration:GPO + } + + value = i2c_smbus_read_byte_data(pdata->client, reg + 0x06); + mask_out = value & ~(mask); + + if(read_only){ + set_data = mask_out | mask; + } + else{ + set_data = mask_out; + } + + i2c_smbus_write_byte_data(pdata->client, reg + 0x06, set_data); + return; +} + +static ssize_t get_gpio_reg(struct device *dev, struct device_attribute *dev_attr, char *buf) +{ + int ret; + int mask; + int value; + char note[150]; + unsigned char pca9555_num; + unsigned char reg; + struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct device *i2cdev = kobj_to_dev(kobj_gpio); + struct i2c_device_platform_data *pdata = i2cdev->platform_data; + + switch(attribute_data[attr->index].addr){ + case PCA9555_A: + pca9555_num = 0; + break; + case PCA9555_B: + pca9555_num = 1; + break; + case PCA9555_C: + pca9555_num = 2; + break; + default: + return sprintf(buf, "attribute address error"); + } + + set_direction(&pdata[pca9555_num], attribute_data[attr->index].reg, attribute_data[attr->index].mask); + + switch (attr->index) { + case PSU1_SMB_ALERT ... OOB_BCM54616S_INT: + reg = attribute_data[attr->index].reg; + mask = attribute_data[attr->index].mask; + value = i2c_smbus_read_byte_data(pdata[pca9555_num].client, reg); + sprintf(note, "\n%s\n",attribute_data[attr->index].note); + value = (value & mask); + break; + default: + return sprintf(buf, "%d not found", attr->index); + } + + switch (mask) { + case 0xFF: + return sprintf(buf, "0x%02x%s", value, note); + case 0x0F: + return sprintf(buf, "0x%01x%s", value, note); + case 0xF0: + value = value >> 4; + return sprintf(buf, "0x%01x%s", value, note); + case 0xC0: + value = value >> 6; + return sprintf(buf, "0x%01x%s", value, note); + case 0x30: + value = value >> 4; + return sprintf(buf, "0x%01x%s", value, note); + default : + value = value >> dni_log2(mask); + return sprintf(buf, "%d%s", value, note); + } +} + + +static ssize_t set_gpio_reg(struct device *dev, struct device_attribute *dev_attr, + const char *buf, size_t count) +{ + int err; + int value; + unsigned long set_data; + unsigned char set_reg; + unsigned char mask; + unsigned char mask_out; + unsigned char pca9555_num; + struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); + struct device *i2cdev = kobj_to_dev(kobj_gpio); + struct i2c_device_platform_data *pdata = i2cdev->platform_data; + + err = kstrtoul(buf, 0, &set_data); + if (err){ + return err; + } + + if (set_data > 0xff){ + printk(KERN_ALERT "address out of range (0x00-0xFF)\n"); + return count; + } + + switch(attribute_data[attr->index].addr){ + case PCA9555_A: + pca9555_num = 0; + break; + case PCA9555_B: + pca9555_num = 1; + break; + case PCA9555_C: + pca9555_num = 2; + break; + default: + return sprintf(buf, "attribute address error"); + } + + set_direction(&pdata[pca9555_num], attribute_data[attr->index].reg, attribute_data[attr->index].mask); + + switch (attr->index) { + case PSU1_SMB_ALERT ... OOB_BCM54616S_INT: + set_reg = attribute_data[attr->index].reg; + mask = attribute_data[attr->index].mask; + value = i2c_smbus_read_byte_data(pdata[pca9555_num].client, set_reg); + mask_out = value & ~(mask); + break; + default: + return sprintf(buf, "%d not found", attr->index); + } + + switch (mask) { + case 0xFF: + set_data = mask_out | (set_data & mask); + break; + case 0x0F: + set_data = mask_out | (set_data & mask); + break; + case 0xF0: + set_data = set_data << 4; + set_data = mask_out | (set_data & mask); + break; + case 0xC0: + set_data = set_data << 6; + set_data = mask_out | (set_data & mask); + break; + case 0x30: + set_data = set_data << 4; + set_data = mask_out | (set_data & mask); + break; + default : + set_data = mask_out | (set_data << dni_log2(mask) ); + } + + i2c_smbus_write_byte_data(pdata[pca9555_num].client, set_reg, set_data); + return count; +} +static SENSOR_DEVICE_ATTR(psu1_smb_alert, S_IRUGO, get_gpio_reg, NULL, PSU1_SMB_ALERT); +static SENSOR_DEVICE_ATTR(psu2_smb_alert, S_IRUGO, get_gpio_reg, NULL, PSU2_SMB_ALERT); +static SENSOR_DEVICE_ATTR(eeprom_wp, S_IRUGO | S_IWUSR, get_gpio_reg, set_gpio_reg, EEPROM_WP); +static SENSOR_DEVICE_ATTR(fan1_led_ag, S_IRUGO | S_IWUSR, get_gpio_reg, set_gpio_reg, FAN1_LED_AG); +static SENSOR_DEVICE_ATTR(fan2_led_ag, S_IRUGO | S_IWUSR, get_gpio_reg, set_gpio_reg, FAN2_LED_AG); +static SENSOR_DEVICE_ATTR(d_fan_alert, S_IRUGO, get_gpio_reg, NULL, D_FAN_ALERT); +static SENSOR_DEVICE_ATTR(psu1_pres, S_IRUGO, get_gpio_reg, NULL, PSU1_PRES); +static SENSOR_DEVICE_ATTR(psu2_pres, S_IRUGO, get_gpio_reg, NULL, PSU2_PRES); +static SENSOR_DEVICE_ATTR(fan_eeprom_wp, S_IRUGO | S_IWUSR, get_gpio_reg, set_gpio_reg, FAN_EEPROM_WP); +static SENSOR_DEVICE_ATTR(d_fan_m_present2, S_IRUGO, get_gpio_reg, NULL, D_FAN_M_PRESENT2); +static SENSOR_DEVICE_ATTR(d_fan_m_present1, S_IRUGO, get_gpio_reg, NULL, D_FAN_M_PRESENT1); +static SENSOR_DEVICE_ATTR(psu1_pg, S_IRUGO, get_gpio_reg, NULL, PSU1_PG); +static SENSOR_DEVICE_ATTR(psu2_pg, S_IRUGO, get_gpio_reg, NULL, PSU2_PG); +static SENSOR_DEVICE_ATTR(bcm54282_int, S_IRUGO, get_gpio_reg, NULL, BCM54282_INT); + +static SENSOR_DEVICE_ATTR(sfp_mod_p1, S_IRUGO, get_gpio_reg, NULL, SFP_MOD_P1); +static SENSOR_DEVICE_ATTR(sfp_rxlos_p1, S_IRUGO, get_gpio_reg, NULL, SFP_RXLOS_P1); +static SENSOR_DEVICE_ATTR(sfp_mod_p2, S_IRUGO, get_gpio_reg, NULL, SFP_MOD_P2); +static SENSOR_DEVICE_ATTR(sfp_rxlos_p2, S_IRUGO, get_gpio_reg, NULL, SFP_RXLOS_P2); +static SENSOR_DEVICE_ATTR(sfp_tx_fault_p1, S_IRUGO, get_gpio_reg, NULL, SFP_TX_FAULT_P1); +static SENSOR_DEVICE_ATTR(sfp_tx_fault_p2, S_IRUGO , get_gpio_reg, NULL, SFP_TX_FAULT_P2); +static SENSOR_DEVICE_ATTR(sfp_tx_dis_p1, S_IRUGO | S_IWUSR, get_gpio_reg, set_gpio_reg, SFP_TX_DIS_P1); +static SENSOR_DEVICE_ATTR(sfp_tx_dis_p2, S_IRUGO | S_IWUSR, get_gpio_reg, set_gpio_reg, SFP_TX_DIS_P2); +static SENSOR_DEVICE_ATTR(oob_bcm54616s_int, S_IRUGO, get_gpio_reg, NULL, OOB_BCM54616S_INT); + +static struct attribute *et6248brb_psu_attrs[] = { + &sensor_dev_attr_psu1_smb_alert.dev_attr.attr, + &sensor_dev_attr_psu2_smb_alert.dev_attr.attr, + &sensor_dev_attr_psu1_pres.dev_attr.attr, + &sensor_dev_attr_psu2_pres.dev_attr.attr, + &sensor_dev_attr_psu1_pg.dev_attr.attr, + &sensor_dev_attr_psu2_pg.dev_attr.attr, + NULL, +}; + +static struct attribute *et6248brb_fan_attrs[] = { + &sensor_dev_attr_fan1_led_ag.dev_attr.attr, + &sensor_dev_attr_fan2_led_ag.dev_attr.attr, + &sensor_dev_attr_d_fan_alert.dev_attr.attr, + &sensor_dev_attr_fan_eeprom_wp.dev_attr.attr, + &sensor_dev_attr_d_fan_m_present1.dev_attr.attr, + &sensor_dev_attr_d_fan_m_present2.dev_attr.attr, + NULL, +}; + +static struct attribute *et6248brb_sfp_attrs[] = { + &sensor_dev_attr_sfp_mod_p1.dev_attr.attr, + &sensor_dev_attr_sfp_rxlos_p1.dev_attr.attr, + &sensor_dev_attr_sfp_mod_p2.dev_attr.attr, + &sensor_dev_attr_sfp_rxlos_p2.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault_p1.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault_p2.dev_attr.attr, + &sensor_dev_attr_sfp_tx_dis_p1.dev_attr.attr, + &sensor_dev_attr_sfp_tx_dis_p2.dev_attr.attr, + NULL, +}; + +static struct attribute *et6248brb_others_attrs[] = { + &sensor_dev_attr_eeprom_wp.dev_attr.attr, + &sensor_dev_attr_bcm54282_int.dev_attr.attr, + &sensor_dev_attr_oob_bcm54616s_int.dev_attr.attr, + NULL, +}; + +static struct attribute_group et6248brb_psu_attr_grp = { + .attrs = et6248brb_psu_attrs, +}; + +static struct attribute_group et6248brb_fan_attr_grp = { + .attrs = et6248brb_fan_attrs, + +}; +static struct attribute_group et6248brb_sfp_attr_grp = { + .attrs = et6248brb_sfp_attrs, +}; + +static struct attribute_group et6248brb_others_attr_grp = { + .attrs = et6248brb_others_attrs, +}; +/*---------------- gpio device - end ------------- */ + +/*---------------- gpio driver - start ----------- */ +static int __init gpio_device_probe(struct platform_device *pdev) +{ + struct i2c_device_platform_data *pdata; + struct i2c_adapter *parent; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", + pdata->parent); + return -ENODEV; + } + + pdata->client = i2c_new_device(parent, &pdata->info); + if (!pdata->client) { + dev_err(&pdev->dev, "Failed to create i2c client %s at %d\n", + pdata->info.type, pdata->parent); + return -ENODEV; + } + + if(pdata->info.addr == PCA9555_A){ + kobj_gpio = &pdev->dev.kobj; + kobj_psu = kobject_create_and_add("PSU", &pdev->dev.kobj); + if (!kobj_psu){ + printk(KERN_WARNING "Fail to create 'PSU' directory"); + goto error; + } + + kobj_fan = kobject_create_and_add("FAN", &pdev->dev.kobj); + if (!kobj_fan){ + printk(KERN_WARNING "Fail to create 'FAN' directory"); + goto error; + } + + kobj_sfp = kobject_create_and_add("SFP", &pdev->dev.kobj); + if (!kobj_sfp){ + printk(KERN_WARNING "Fail to create 'SFP' directory"); + goto error; + } + kobj_others = kobject_create_and_add("Others", &pdev->dev.kobj); + if (!kobj_others){ + printk(KERN_WARNING "Fail to create 'Others' directory"); + goto error; + } + ret = sysfs_create_group(kobj_psu, &et6248brb_psu_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create 'psu' attribute group"); + goto error; + } + ret = sysfs_create_group(kobj_fan, &et6248brb_fan_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create 'fan' attribute group"); + goto error; + } + ret = sysfs_create_group(kobj_sfp, &et6248brb_sfp_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create 'sfp' attribute group"); + goto error; + } + ret = sysfs_create_group(kobj_others, &et6248brb_others_attr_grp); + if (ret) { + printk(KERN_WARNING "Fail to create 'others' attribute group"); + goto error; + } + } + return 0; + +error: + kobject_put(kobj_gpio); + kobject_put(kobj_psu); + kobject_put(kobj_fan); + kobject_put(kobj_sfp); + kobject_put(kobj_others); + i2c_unregister_device(pdata->client); + i2c_put_adapter(parent); + + return -ENODEV; +} + +static int __exit gpio_deivce_remove(struct platform_device *pdev) +{ + struct i2c_adapter *parent; + struct i2c_device_platform_data *pdata; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + } + else if(pdata->info.addr == PCA9555_A){ + sysfs_remove_group(kobj_gpio, &et6248brb_psu_attr_grp); + sysfs_remove_group(kobj_fan, &et6248brb_fan_attr_grp); + sysfs_remove_group(kobj_sfp, &et6248brb_sfp_attr_grp); + sysfs_remove_group(kobj_others, &et6248brb_others_attr_grp); + kobject_put(kobj_gpio); + kobject_put(kobj_fan); + kobject_put(kobj_psu); + kobject_put(kobj_sfp); + kobject_put(kobj_others); + } + + if (pdata->client) { + if (!parent) { + parent = (pdata->client)->adapter; + } + i2c_unregister_device(pdata->client); + } + + i2c_put_adapter(parent); + return 0; +} + +static struct platform_driver gpio_device_driver = { + .probe = gpio_device_probe, + .remove = __exit_p(gpio_deivce_remove), + .driver = { + .owner = THIS_MODULE, + .name = "delta-et6248brb-gpio", + } +}; +/*---------------- gpio driver - end ------------- */ + +/*---------------- module initialization ------------- */ +static int __init delta_et6248brb_platform_init(void) +{ + struct i2c_adapter *adapter; + + int ret, i = 0, j = 0; + printk("et6248brb_platform module initialization\n"); + + //Use pca9547 in i2c_mux_pca954x.c + adapter = i2c_get_adapter(BUS1); + i2c_client_9547 = i2c_new_device(adapter, &i2c_info_pca9547[0]); + i2c_put_adapter(adapter); + + // register the i2c devices + ret = platform_driver_register(&i2c_device_driver); + if (ret) { + printk(KERN_WARNING "Fail to register i2c device driver\n"); + goto error_i2c_device_driver; + } + + // register the i2c devices + ret = platform_driver_register(&gpio_device_driver); + if (ret) { + printk(KERN_WARNING "Fail to register i2c device driver\n"); + goto error_gpio_device_driver; + } + + for (i = 0; i < ARRAY_SIZE(et6248brb_i2c_device); i++) + { + ret = platform_device_register(&et6248brb_i2c_device[i]); + if (ret) { + printk(KERN_WARNING "Fail to create i2c device %d\n", i); + goto error_et6248brb_i2c_device; + } + } + + for (j = 0; j < ARRAY_SIZE(et6248brb_gpio_device); j++) + { + ret = platform_device_register(&et6248brb_gpio_device[j]); + if (ret) { + printk(KERN_WARNING "Fail to create i2c device %d\n", j); + goto error_et6248brb_gpio_device; + } + } + + return 0; +error_et6248brb_gpio_device: + j--; + for (; j >= 0; j--) { + platform_device_unregister(&et6248brb_gpio_device[j]); + } +error_et6248brb_i2c_device: + i--; + for (; i >= 0; i--) { + platform_device_unregister(&et6248brb_i2c_device[i]); + } + platform_driver_unregister(&gpio_device_driver); +error_gpio_device_driver: + platform_driver_unregister(&i2c_device_driver); +error_i2c_device_driver: + return ret; +} + +static void __exit delta_et6248brb_platform_exit(void) +{ + int i = 0; + + for ( i = 0; i < ARRAY_SIZE(et6248brb_i2c_device); i++ ) { + platform_device_unregister(&et6248brb_i2c_device[i]); + } + + for ( i = 0; i < ARRAY_SIZE(et6248brb_gpio_device); i++ ) { + platform_device_unregister(&et6248brb_gpio_device[i]); + } + platform_driver_unregister(&i2c_device_driver); + platform_driver_unregister(&gpio_device_driver); + i2c_unregister_device(i2c_client_9547); +} + +module_init(delta_et6248brb_platform_init); +module_exit(delta_et6248brb_platform_exit); + +MODULE_DESCRIPTION("DNI et6248brb Platform Support"); +MODULE_AUTHOR("Jacky Liu "); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/dni_gpio.c b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/dni_gpio.c new file mode 100644 index 000000000000..b83ed4e6035f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/modules/dni_gpio.c @@ -0,0 +1,695 @@ +/* + * Intel ICH6-10, Series 5 and 6, Atom C2000 (Avoton/Rangeley) GPIO driver + * + * Copyright (C) 2010 Extreme Engineering Solutions. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +#include +#endif // #if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) + +#include +#include +#include +#include +#include + +#define DRV_NAME "gpio_ich" + +/* + * GPIO register offsets in GPIO I/O space. + * Each chunk of 32 GPIOs is manipulated via its own USE_SELx, IO_SELx, and + * LVLx registers. Logic in the read/write functions takes a register and + * an absolute bit number and determines the proper register offset and bit + * number in that register. For example, to read the value of GPIO bit 50 + * the code would access offset ichx_regs[2(=GPIO_LVL)][1(=50/32)], + * bit 18 (50%32). + */ +enum GPIO_REG { + GPIO_USE_SEL = 0, + GPIO_IO_SEL, + GPIO_LVL, + GPO_BLINK +}; + +static const u8 ichx_regs[4][3] = { + {0x00, 0x30, 0x40}, /* USE_SEL[1-3] offsets */ + {0x04, 0x34, 0x44}, /* IO_SEL[1-3] offsets */ + {0x0c, 0x38, 0x48}, /* LVL[1-3] offsets */ + {0x18, 0x18, 0x18}, /* BLINK offset */ +}; + +static const u8 ichx_reglen[3] = { + 0x30, 0x10, 0x10, +}; + +static const u8 avoton_regs[4][3] = { + {0x00, 0x80, 0x00}, + {0x04, 0x84, 0x00}, + {0x08, 0x88, 0x00}, +}; + +static const u8 avoton_reglen[3] = { + 0x10, 0x10, 0x00, +}; + +#define ICHX_WRITE(val, reg, base_res) outl(val, (reg) + (base_res)->start) +#define ICHX_READ(reg, base_res) inl((reg) + (base_res)->start) + +struct ichx_desc { + /* Max GPIO pins the chipset can have */ + uint ngpio; + + /* chipset registers */ + const u8 (*regs)[3]; + const u8 *reglen; + + /* GPO_BLINK is available on this chipset */ + bool have_blink; + + /* Whether the chipset has GPIO in GPE0_STS in the PM IO region */ + bool uses_gpe0; + + /* USE_SEL is bogus on some chipsets, eg 3100 */ + u32 use_sel_ignore[3]; + + /* Some chipsets have quirks, let these use their own request/get */ + int (*request)(struct gpio_chip *chip, unsigned offset); + int (*get)(struct gpio_chip *chip, unsigned offset); + + /* + * Some chipsets don't let reading output values on GPIO_LVL register + * this option allows driver caching written output values + */ + bool use_outlvl_cache; +}; + +static struct { + spinlock_t lock; + struct platform_device *dev; + struct gpio_chip chip; + struct resource *gpio_base; /* GPIO IO base */ + struct resource *pm_base; /* Power Mangagment IO base */ + struct ichx_desc *desc; /* Pointer to chipset-specific description */ + u32 orig_gpio_ctrl; /* Orig CTRL value, used to restore on exit */ + u8 use_gpio; /* Which GPIO groups are usable */ + int outlvl_cache[3]; /* cached output values */ +} ichx_priv; + +static int modparam_gpiobase = -1; /* dynamic */ +module_param_named(gpiobase, modparam_gpiobase, int, 0444); +MODULE_PARM_DESC(gpiobase, "The GPIO number base. -1 means dynamic, " + "which is the default."); + +static int ichx_write_bit(int reg, unsigned nr, int val, int verify) +{ + unsigned long flags; + u32 data, tmp; + int reg_nr = nr / 32; + int bit = nr & 0x1f; + int ret = 0; + + spin_lock_irqsave(&ichx_priv.lock, flags); + + if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache) + { + data = ichx_priv.outlvl_cache[reg_nr]; + } + else + { + data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], + ichx_priv.gpio_base); + } + if (val) + data |= 1 << bit; + else + data &= ~(1 << bit); + + ICHX_WRITE(data, ichx_priv.desc->regs[reg][reg_nr], + ichx_priv.gpio_base); + if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache) + ichx_priv.outlvl_cache[reg_nr] = data; + + tmp = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], + ichx_priv.gpio_base); + if (verify && data != tmp) + ret = -EPERM; + + spin_unlock_irqrestore(&ichx_priv.lock, flags); + + return ret; +} + +static int ichx_read_bit(int reg, unsigned nr) +{ + unsigned long flags; + u32 data; + int reg_nr = nr / 32; + int bit = nr & 0x1f; + + spin_lock_irqsave(&ichx_priv.lock, flags); + + data = ICHX_READ(ichx_priv.desc->regs[reg][reg_nr], + ichx_priv.gpio_base); + + if (reg == GPIO_LVL && ichx_priv.desc->use_outlvl_cache) + data = ichx_priv.outlvl_cache[reg_nr] | data; + + spin_unlock_irqrestore(&ichx_priv.lock, flags); + + return data & (1 << bit) ? 1 : 0; +} + +static bool ichx_gpio_check_available(struct gpio_chip *gpio, unsigned nr) +{ + return !!(ichx_priv.use_gpio & (1 << (nr / 32))); +} + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int ichx_gpio_get_direction(struct gpio_chip *gpio, unsigned nr) +{ + return ichx_read_bit(GPIO_IO_SEL, nr) ? GPIOF_DIR_IN : GPIOF_DIR_OUT; +} +#endif // #if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) + +static int ichx_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) +{ + /* + * Try setting pin as an input and verify it worked since many pins + * are output-only. + */ + if (ichx_write_bit(GPIO_IO_SEL, nr, 1, 1)) + return -EINVAL; + + return 0; +} + +static int ichx_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, + int val) +{ + /* Disable blink hardware which is available for GPIOs from 0 to 31. */ + if (nr < 32 && ichx_priv.desc->have_blink) + ichx_write_bit(GPO_BLINK, nr, 0, 0); + + /* Set GPIO output value. */ + ichx_write_bit(GPIO_LVL, nr, val, 0); + + /* + * Try setting pin as an output and verify it worked since many pins + * are input-only. + */ + if (ichx_write_bit(GPIO_IO_SEL, nr, 0, 1)) + return -EINVAL; + + return 0; +} + +static int ichx_gpio_get(struct gpio_chip *chip, unsigned nr) +{ + return ichx_read_bit(GPIO_LVL, nr); +} + +static int ich6_gpio_get(struct gpio_chip *chip, unsigned nr) +{ + unsigned long flags; + u32 data; + + /* + * GPI 0 - 15 need to be read from the power management registers on + * a ICH6/3100 bridge. + */ + if (nr < 16) { + if (!ichx_priv.pm_base) + return -ENXIO; + + spin_lock_irqsave(&ichx_priv.lock, flags); + + /* GPI 0 - 15 are latched, write 1 to clear*/ + ICHX_WRITE(1 << (16 + nr), 0, ichx_priv.pm_base); + data = ICHX_READ(0, ichx_priv.pm_base); + + spin_unlock_irqrestore(&ichx_priv.lock, flags); + + return (data >> 16) & (1 << nr) ? 1 : 0; + } else { + return ichx_gpio_get(chip, nr); + } +} + +static int ichx_gpio_request(struct gpio_chip *chip, unsigned nr) +{ + if (!ichx_gpio_check_available(chip, nr)) + return -ENXIO; + + /* + * Note we assume the BIOS properly set a bridge's USE value. Some + * chips (eg Intel 3100) have bogus USE values though, so first see if + * the chipset's USE value can be trusted for this specific bit. + * If it can't be trusted, assume that the pin can be used as a GPIO. + */ + if (ichx_priv.desc->use_sel_ignore[nr / 32] & (1 << (nr & 0x1f))) + return 0; + + return ichx_read_bit(GPIO_USE_SEL, nr) ? 0 : -ENODEV; +} + +static int ich6_gpio_request(struct gpio_chip *chip, unsigned nr) +{ + /* + * Fixups for bits 16 and 17 are necessary on the Intel ICH6/3100 + * bridge as they are controlled by USE register bits 0 and 1. See + * "Table 704 GPIO_USE_SEL1 register" in the i3100 datasheet for + * additional info. + */ + if (nr == 16 || nr == 17) + nr -= 16; + + return ichx_gpio_request(chip, nr); +} + +static void ichx_gpio_set(struct gpio_chip *chip, unsigned nr, int val) +{ + ichx_write_bit(GPIO_LVL, nr, val, 0); +} + +static void ichx_gpiolib_setup(struct gpio_chip *chip) +{ + chip->owner = THIS_MODULE; + chip->label = DRV_NAME; + +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) + chip->dev = &ichx_priv.dev->dev; +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) + chip->parent = &ichx_priv.dev->dev; + chip->get_direction = ichx_gpio_get_direction; +#endif // #if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) + + /* Allow chip-specific overrides of request()/get() */ + chip->request = ichx_priv.desc->request ? + ichx_priv.desc->request : ichx_gpio_request; + chip->get = ichx_priv.desc->get ? + ichx_priv.desc->get : ichx_gpio_get; + + chip->set = ichx_gpio_set; + chip->direction_input = ichx_gpio_direction_input; + chip->direction_output = ichx_gpio_direction_output; + chip->base = modparam_gpiobase; + chip->ngpio = ichx_priv.desc->ngpio; + chip->can_sleep = false; + chip->dbg_show = NULL; +} + +/* ICH6-based, 631xesb-based */ +static struct ichx_desc ich6_desc = { + /* Bridges using the ICH6 controller need fixups for GPIO 0 - 17 */ + .request = ich6_gpio_request, + .get = ich6_gpio_get, + + /* GPIO 0-15 are read in the GPE0_STS PM register */ + .uses_gpe0 = true, + + .ngpio = 50, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* Intel 3100 */ +static struct ichx_desc i3100_desc = { + /* + * Bits 16,17, 20 of USE_SEL and bit 16 of USE_SEL2 always read 0 on + * the Intel 3100. See "Table 712. GPIO Summary Table" of 3100 + * Datasheet for more info. + */ + .use_sel_ignore = {0x00130000, 0x00010000, 0x0}, + + /* The 3100 needs fixups for GPIO 0 - 17 */ + .request = ich6_gpio_request, + .get = ich6_gpio_get, + + /* GPIO 0-15 are read in the GPE0_STS PM register */ + .uses_gpe0 = true, + + .ngpio = 50, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* ICH7 and ICH8-based */ +static struct ichx_desc ich7_desc = { + .ngpio = 50, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* ICH9-based */ +static struct ichx_desc ich9_desc = { + .ngpio = 61, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* ICH10-based - Consumer/corporate versions have different amount of GPIO */ +static struct ichx_desc ich10_cons_desc = { + .ngpio = 61, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; +static struct ichx_desc ich10_corp_desc = { + .ngpio = 72, + .have_blink = true, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* Intel 5 series, 6 series, 3400 series, and C200 series */ +static struct ichx_desc intel5_desc = { + .ngpio = 76, + .regs = ichx_regs, + .reglen = ichx_reglen, +}; + +/* Avoton */ +static struct ichx_desc avoton_desc = { + /* Avoton has only 59 GPIOs, but we assume the first set of register + * (Core) has 32 instead of 31 to keep gpio-ich compliance + */ + .ngpio = 60, + .regs = avoton_regs, + .reglen = avoton_reglen, + .use_outlvl_cache = true, +}; +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) +static int ichx_gpio_request_regions(struct resource *res_base, + const char *name, u8 use_gpio) +{ + int i; + + if (!res_base || !res_base->start || !res_base->end) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) { + if (!(use_gpio & (1 << i))) + continue; + if (!request_region( + res_base->start + ichx_priv.desc->regs[0][i], + ichx_priv.desc->reglen[i], name)) + goto request_err; + } + return 0; + +request_err: + /* Clean up: release already requested regions, if any */ + for (i--; i >= 0; i--) { + if (!(use_gpio & (1 << i))) + continue; + release_region(res_base->start + ichx_priv.desc->regs[0][i], + ichx_priv.desc->reglen[i]); + } + return -EBUSY; +} + +static void ichx_gpio_release_regions(struct resource *res_base, u8 use_gpio) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) { + if (!(use_gpio & (1 << i))) + continue; + release_region(res_base->start + ichx_priv.desc->regs[0][i], + ichx_priv.desc->reglen[i]); + } +} + +static int ichx_gpio_probe(struct platform_device *pdev) +{ + struct resource *res_base, *res_pm; + int err; + struct lpc_ich_info *ich_info = dev_get_platdata(&pdev->dev); + + if (!ich_info) + return -ENODEV; + + ichx_priv.dev = pdev; + + switch (ich_info->gpio_version) { + case ICH_I3100_GPIO: + ichx_priv.desc = &i3100_desc; + break; + case ICH_V5_GPIO: + ichx_priv.desc = &intel5_desc; + break; + case ICH_V6_GPIO: + ichx_priv.desc = &ich6_desc; + break; + case ICH_V7_GPIO: + ichx_priv.desc = &ich7_desc; + break; + case ICH_V9_GPIO: + ichx_priv.desc = &ich9_desc; + break; + case ICH_V10CORP_GPIO: + ichx_priv.desc = &ich10_corp_desc; + break; + case ICH_V10CONS_GPIO: + ichx_priv.desc = &ich10_cons_desc; + break; + case AVOTON_GPIO: + ichx_priv.desc = &avoton_desc; + ichx_priv.outlvl_cache[0] = 0x06; /*core output values*/ + ichx_priv.outlvl_cache[1] = 0x7c0008; /*sus output values*/ + ichx_priv.outlvl_cache[2] = 0x0; /*no used*/ + + break; + default: + return -ENODEV; + } + + spin_lock_init(&ichx_priv.lock); + res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO); + ichx_priv.use_gpio = ich_info->use_gpio; + err = ichx_gpio_request_regions(res_base, pdev->name, + ichx_priv.use_gpio); + if (err) + return err; + + ichx_priv.gpio_base = res_base; + + /* + * If necessary, determine the I/O address of ACPI/power management + * registers which are needed to read the the GPE0 register for GPI pins + * 0 - 15 on some chipsets. + */ + if (!ichx_priv.desc->uses_gpe0) + goto init; + + res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0); + if (!res_pm) { + pr_warn("ACPI BAR is unavailable, GPI 0 - 15 unavailable\n"); + goto init; + } + + if (!request_region(res_pm->start, resource_size(res_pm), + pdev->name)) { + pr_warn("ACPI BAR is busy, GPI 0 - 15 unavailable\n"); + goto init; + } + + ichx_priv.pm_base = res_pm; + +init: + ichx_gpiolib_setup(&ichx_priv.chip); + err = gpiochip_add(&ichx_priv.chip); + if (err) { + pr_err("Failed to register GPIOs\n"); + goto add_err; + } + + pr_info("GPIO from %d to %d on %s\n", ichx_priv.chip.base, + ichx_priv.chip.base + ichx_priv.chip.ngpio - 1, DRV_NAME); + + return 0; + +add_err: + ichx_gpio_release_regions(ichx_priv.gpio_base, ichx_priv.use_gpio); + if (ichx_priv.pm_base) + release_region(ichx_priv.pm_base->start, + resource_size(ichx_priv.pm_base)); + return err; +} + +static int ichx_gpio_remove(struct platform_device *pdev) +{ + int err; + + err = gpiochip_remove(&ichx_priv.chip); + if (err) { + dev_err(&pdev->dev, "%s failed, %d\n", + "gpiochip_remove()", err); + return err; + } + + ichx_gpio_release_regions(ichx_priv.gpio_base, ichx_priv.use_gpio); + if (ichx_priv.pm_base) + release_region(ichx_priv.pm_base->start, + resource_size(ichx_priv.pm_base)); + + return 0; +} +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int ichx_gpio_request_regions(struct device *dev, + struct resource *res_base, const char *name, u8 use_gpio) +{ + int i; + + if (!res_base || !res_base->start || !res_base->end) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(ichx_priv.desc->regs[0]); i++) { + if (!(use_gpio & (1 << i))) + continue; + if (!devm_request_region(dev, + res_base->start + ichx_priv.desc->regs[0][i], + ichx_priv.desc->reglen[i], name)) + return -EBUSY; + } + return 0; +} + +static int ichx_gpio_probe(struct platform_device *pdev) +{ + struct resource *res_base, *res_pm; + int err; + struct lpc_ich_info *ich_info = dev_get_platdata(&pdev->dev); + + if (!ich_info) + return -ENODEV; + + ichx_priv.dev = pdev; + + switch (ich_info->gpio_version) { + case ICH_I3100_GPIO: + ichx_priv.desc = &i3100_desc; + break; + case ICH_V5_GPIO: + ichx_priv.desc = &intel5_desc; + break; + case ICH_V6_GPIO: + ichx_priv.desc = &ich6_desc; + break; + case ICH_V7_GPIO: + ichx_priv.desc = &ich7_desc; + break; + case ICH_V9_GPIO: + ichx_priv.desc = &ich9_desc; + break; + case ICH_V10CORP_GPIO: + ichx_priv.desc = &ich10_corp_desc; + break; + case ICH_V10CONS_GPIO: + ichx_priv.desc = &ich10_cons_desc; + break; + case AVOTON_GPIO: + ichx_priv.desc = &avoton_desc; + ichx_priv.outlvl_cache[0] = 0x06; /*core output values*/ + ichx_priv.outlvl_cache[1] = 0x7c0008; /*sus output values*/ + ichx_priv.outlvl_cache[2] = 0x0; /*no used*/ + break; + default: + return -ENODEV; + } + + spin_lock_init(&ichx_priv.lock); + res_base = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPIO); + ichx_priv.use_gpio = ich_info->use_gpio; + err = ichx_gpio_request_regions(&pdev->dev, res_base, pdev->name, + ichx_priv.use_gpio); + if (err) + return err; + + ichx_priv.gpio_base = res_base; + + /* + * If necessary, determine the I/O address of ACPI/power management + * registers which are needed to read the the GPE0 register for GPI pins + * 0 - 15 on some chipsets. + */ + if (!ichx_priv.desc->uses_gpe0) + goto init; + + res_pm = platform_get_resource(pdev, IORESOURCE_IO, ICH_RES_GPE0); + if (!res_pm) { + pr_warn("ACPI BAR is unavailable, GPI 0 - 15 unavailable\n"); + goto init; + } + + if (!devm_request_region(&pdev->dev, res_pm->start, + resource_size(res_pm), pdev->name)) { + pr_warn("ACPI BAR is busy, GPI 0 - 15 unavailable\n"); + goto init; + } + + ichx_priv.pm_base = res_pm; + +init: + ichx_gpiolib_setup(&ichx_priv.chip); + err = gpiochip_add_data(&ichx_priv.chip, NULL); + if (err) { + pr_err("Failed to register GPIOs\n"); + return err; + } + + pr_info("GPIO from %d to %d on %s\n", ichx_priv.chip.base, + ichx_priv.chip.base + ichx_priv.chip.ngpio - 1, DRV_NAME); + + return 0; +} + +static int ichx_gpio_remove(struct platform_device *pdev) +{ + gpiochip_remove(&ichx_priv.chip); + + return 0; +} +#endif // #if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) + +static struct platform_driver ichx_gpio_driver = { + .driver = { +#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) + .owner = THIS_MODULE, +#else // #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +#endif // #if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0) + .name = DRV_NAME, + }, + .probe = ichx_gpio_probe, + .remove = ichx_gpio_remove, +}; + +module_platform_driver(ichx_gpio_driver); + +MODULE_AUTHOR("Johnson Lu "); +MODULE_DESCRIPTION("GPIO interface for Intel ICH series"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:"DRV_NAME); diff --git a/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/et-6248brb_platform_init.sh b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/et-6248brb_platform_init.sh new file mode 100755 index 000000000000..3779e4684d84 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/et-6248brb_platform_init.sh @@ -0,0 +1,11 @@ +#!/bin/bash + +#platform init script for Delta et-6248brb + +#fan speed monitol start +/usr/share/sonic/device/x86_64-delta_et-6248brb-r0/fancontrol.service /usr/share/sonic/device/x86_64-delta_et-6248brb-r0/fancontrol & +sh /usr/local/bin/led_status.sh & + + +exit 0 + diff --git a/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/led_status.sh b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/led_status.sh new file mode 100644 index 000000000000..2ba61bbfecb3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/led_status.sh @@ -0,0 +1,165 @@ +#!/bin/bash + +FAN1_EEPROM="-y 0 0x55 0x0a" +FAN2_EEPROM="-y 0 0x56 0x0a" +FAN1_RPM="/sys/bus/i2c/devices/0-002e/fan1_input" +FAN2_RPM="/sys/bus/i2c/devices/0-002e/fan2_input" +FAN_TRAY1_LED="/sys/devices/platform/delta-et6248brb-gpio.0/FAN/fan1_led_ag" +FAN_TRAY2_LED="/sys/devices/platform/delta-et6248brb-gpio.0/FAN/fan2_led_ag" + +if [ `uname -a | awk '{print $3}'` = "4.9.0-5-amd64" ]; then + SYS_LED_G="/sys/class/gpio/gpio453/value" + SYS_LED_R="/sys/class/gpio/gpio454/value" + PWR_LED_G="/sys/class/gpio/gpio455/value" + PWR_LED_R="/sys/class/gpio/gpio489/value" + FAN_LED_G="/sys/class/gpio/gpio485/value" + FAN_LED_R="/sys/class/gpio/gpio494/value" +else + SYS_LED_G="/sys/class/gpio/gpio197/value" + SYS_LED_R="/sys/class/gpio/gpio198/value" + PWR_LED_G="/sys/class/gpio/gpio199/value" + PWR_LED_R="/sys/class/gpio/gpio233/value" + FAN_LED_G="/sys/class/gpio/gpio229/value" + FAN_LED_R="/sys/class/gpio/gpio238/value" +fi + +PSU1_EEPROM="-y 2 0x50 0x00" +PSU2_EEPROM="-y 3 0x51 0x00" +PSU1_PG="/sys/devices/platform/delta-et6248brb-gpio.0/PSU/psu1_pg" +PSU2_PG="/sys/devices/platform/delta-et6248brb-gpio.0/PSU/psu2_pg" + +catfaneeprom(){ + fan_eeprom_num=0 + i2cget $FAN1_EEPROM > /dev/null 2>&1 + if [ "`echo $?`" -eq "0" ]; then + fan_eeprom_num=$((fan_eeprom_num+1)) + elif [ "`echo $?`" -ne "0" ]; then + fan_eeprom_num=$((fan_eeprom_num)) + fi + + i2cget $FAN2_EEPROM > /dev/null 2>&1 + if [ "`echo $?`" -eq "0" ]; then + fan_eeprom_num=$((fan_eeprom_num+1)) + elif [ "`echo $?`" -ne "0" ]; then + fan_eeprom_num=$((fan_eeprom_num_num)) + fi +} + +catfanspeed(){ + + fan_rpm_normal_num=0 + fan1_rpm_normal_num=0 + fan1_rpm=`cat $FAN1_RPM` + + if [ "${fan1_rpm}" -ne "960" ] && [ "${fan1_rpm}" -ne "0" ]; then + fan1_rpm_normal_num=$((fan1_rpm_normal_num+1)) + elif [ "${fan1_rpm}" -eq "960" ] || [ "${fan1_rpm}" -eq "0" ]; then + fan1_rpm_normal_num=$((fan1_rpm_normal_num)) + fi + + fan2_rpm_normal_num=0 + fan2_rpm=`cat $FAN2_RPM` + + if [ "${fan2_rpm}" -ne "960" ] && [ "${fan2_rpm}" -ne "0" ]; then + fan2_rpm_normal_num=$((fan2_rpm_normal_num+1)) + elif [ "${fan2_rpm}" -eq "960" ] || [ "${fan2_rpm}" -eq "0" ]; then + fan2_rpm_normal_num=$((fan2_rpm_normal_num)) + fi + + fan_rpm_normal_num=$((fan1_rpm_normal_num+fan2_rpm_normal_num)) +} + +setfanled(){ + if [ "${fan_eeprom_num}" -eq "2" ] && [ "${fan_rpm_normal_num}" -eq "2" ]; then + echo "1" > $FAN_LED_G + echo "0" > $FAN_LED_R + elif [ "${fan_eeprom_num}" -lt "2" ] || [ "${fan_rpm_normal_num}" -lt "2" ]; then + echo "1" > $FAN_LED_R + echo "0" > $FAN_LED_G + fi +} + +setfantrayled(){ + if [ "${fan1_rpm_normal_num}" -eq "1" ]; then + echo "0x02" > $FAN_TRAY1_LED + else + echo "0x01" > $FAN_TRAY1_LED + fi + + if [ "${fan2_rpm_normal_num}" -eq "1" ]; then + echo "0x02" > $FAN_TRAY2_LED + else + echo "0x01" > $FAN_TRAY2_LED + fi +} + +catpsueeprom(){ + psu_eeprom_num=0 + i2cget $PSU1_EEPROM > /dev/null 2>&1 + if [ "`echo $?`" -eq "0" ]; then + psu_eeprom_num=$((psu_eeprom_num+1)) + elif [ "`echo $?`" -ne "0" ]; then + psu_eeprom_num=$((psu_eeprom_num)) + fi + + i2cget $PSU2_EEPROM > /dev/null 2>&1 + if [ "`echo $?`" -eq "0" ]; then + psu_eeprom_num=$((psu_eeprom_num+1)) + elif [ "`echo $?`" -ne "0" ]; then + psu_eeprom_num=$((psu_eeprom_num)) + fi +} + +catpsupowergood(){ + + psu_normal_num=0 + psu1_normal_num=0 + psu1_good=`cat $PSU1_PG | head -n 1` + + if [ "${psu1_good}" -eq "1" ]; then + psu1_normal_num=$((psu1_normal_num+1)) + elif [ "${psu1_good}" -eq "0" ]; then + psu1_normal_num=$((psu1_normal_num)) + fi + + psu2_normal_num=0 + psu2_good=`cat $PSU2_PG | head -n 1` + + if [ "${psu2_good}" -eq "1" ]; then + psu2_normal_num=$((psu2_normal_num+1)) + elif [ "${psu2_good}" -eq "0" ]; then + psu2_normal_num=$((psu2_normal_num)) + fi + + psu_normal_num=$((psu1_normal_num+psu2_normal_num)) +} + +setpsuled(){ + if [ "${psu_eeprom_num}" -eq "2" ] && [ "${psu_normal_num}" -eq "2" ]; then + echo "1" > $PWR_LED_G + echo "0" > $PWR_LED_R + elif [ "${psu_eeprom_num}" -lt "2" ] || [ "${psu_normal_num}" -lt "2" ]; then + echo "1" > $PWR_LED_R + echo "0" > $PWR_LED_G + fi +} + +platformstatus(){ + echo "1" > $SYS_LED_G + echo "0" > $SYS_LED_R + catfaneeprom + catfanspeed + setfanled + setfantrayled + + catpsueeprom + catpsupowergood + setpsuled +} + +while true +do + platformstatus + sleep 1 +done + diff --git a/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag5648.service b/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag5648.service new file mode 100644 index 000000000000..7a74c0155473 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-ag5648.service @@ -0,0 +1,13 @@ +[Unit] +Description=Delta ag5648 Platform modules +After=local-fs.target +Before=pmon.service + +[Service] +Type=oneshot +ExecStart=-/etc/init.d/platform-modules-ag5648 start +ExecStop=-/etc/init.d/platform-modules-ag5648 stop +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-et-6248brb.service b/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-et-6248brb.service new file mode 100644 index 000000000000..901bcffaea8e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/systemd/platform-modules-et-6248brb.service @@ -0,0 +1,13 @@ +[Unit] +Description=Delta et-6248brb Platform modules +After=local-fs.target +Before=pmon.service + +[Service] +Type=oneshot +ExecStart=-/etc/init.d/platform-modules-et-6248brb start +ExecStop=-/etc/init.d/platform-modules-et-6248brb stop +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target From ecfca8bf230bf5843d6988a16a573f2976abe46e Mon Sep 17 00:00:00 2001 From: paavaanan Date: Fri, 22 Jun 2018 23:18:44 +0530 Subject: [PATCH 107/180] [devices]: DellEMC new platform support for z9264f - 64x100 (#26) * Added new platform support DellEMC - Z92264f - 64x100 * Includes changes with Makefiles, sfputil, eeprom and default minigraph * Led support for Z9264f platform * Includes changes on default minigraph * ipmitool implementation in pmon docker. platform_sensors script is inclued in pmon startup --- .../DellEMC-Z9264f/port_config.ini | 65 + .../DellEMC-Z9264f/sai.profile | 1 + .../installer.conf | 3 + .../led_proc_init.soc | 111 ++ .../minigraph.xml | 1541 +++++++++++++++++ .../plugins/eeprom.py | 22 + .../plugins/psuutil.py | 97 ++ .../plugins/sfputil.py | 192 ++ dockers/docker-platform-monitor/Dockerfile.j2 | 2 +- files/build_templates/docker_image_ctl.j2 | 11 + platform/broadcom/one-image.mk | 1 + platform/broadcom/platform-modules-dell.mk | 9 +- platform/broadcom/sonic-platform-modules-dell | 2 +- 13 files changed, 2054 insertions(+), 3 deletions(-) create mode 100644 device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/port_config.ini create mode 100644 device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/sai.profile create mode 100644 device/dell/x86_64-dellemc_z9264f_c3538-r0/installer.conf create mode 100644 device/dell/x86_64-dellemc_z9264f_c3538-r0/led_proc_init.soc create mode 100644 device/dell/x86_64-dellemc_z9264f_c3538-r0/minigraph.xml create mode 100644 device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/eeprom.py create mode 100644 device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/psuutil.py create mode 100644 device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/sfputil.py diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/port_config.ini b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/port_config.ini new file mode 100644 index 000000000000..2ae02b21b49c --- /dev/null +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/port_config.ini @@ -0,0 +1,65 @@ +# name lanes alias index +Ethernet0 49,50,51,52 hundredGigE1/1 0 +Ethernet4 53,54,55,56 hundredGigE1/2 1 +Ethernet8 65,66,67,68 hundredGigE1/3 2 +Ethernet12 69,70,71,72 hundredGigE1/4 3 +Ethernet16 81,82,83,84 hundredGigE1/5 4 +Ethernet20 85,86,87,88 hundredGigE1/6 5 +Ethernet24 97,98,99,100 hundredGigE1/7 6 +Ethernet28 101,102,103,104 hundredGigE1/8 7 +Ethernet32 1,2,3,4 hundredGigE1/9 8 +Ethernet36 5,6,7,8 hundredGigE1/10 9 +Ethernet40 17,18,19,20 hundredGigE1/11 10 +Ethernet44 21,22,23,24 hundredGigE1/12 11 +Ethernet48 33,34,35,36 hundredGigE1/13 12 +Ethernet52 37,38,39,40 hundredGigE1/14 13 +Ethernet56 113,114,115,116 hundredGigE1/15 14 +Ethernet60 117,118,119,120 hundredGigE1/16 15 +Ethernet64 133,134,135,136 hundredGigE1/17 16 +Ethernet68 129,130,131,132 hundredGigE1/18 17 +Ethernet72 213,214,215,216 hundredGigE1/19 18 +Ethernet76 209,210,211,212 hundredGigE1/20 19 +Ethernet80 229,230,231,232 hundredGigE1/21 20 +Ethernet84 225,226,227,228 hundredGigE1/22 21 +Ethernet88 245,246,247,248 hundredGigE1/23 22 +Ethernet92 241,242,243,244 hundredGigE1/24 23 +Ethernet96 149,150,151,152 hundredGigE1/25 24 +Ethernet100 145,146,147,148 hundredGigE1/26 25 +Ethernet104 165,166,167,168 hundredGigE1/27 26 +Ethernet108 161,162,163,164 hundredGigE1/28 27 +Ethernet112 181,182,183,184 hundredGigE1/29 28 +Ethernet116 177,178,179,180 hundredGigE1/30 29 +Ethernet120 197,198,199,200 hundredGigE1/31 30 +Ethernet124 193,194,195,196 hundredGigE1/32 31 +Ethernet128 61,62,63,64 hundredGigE1/33 32 +Ethernet132 57,58,59,60 hundredGigE1/34 33 +Ethernet136 77,78,79,80 hundredGigE1/35 34 +Ethernet140 73,74,75,76 hundredGigE1/36 35 +Ethernet144 93,94,95,96 hundredGigE1/37 36 +Ethernet148 89,90,91,92 hundredGigE1/38 37 +Ethernet152 109,110,111,112 hundredGigE1/39 38 +Ethernet156 105,106,107,108 hundredGigE1/40 39 +Ethernet160 13,14,15,16 hundredGigE1/41 40 +Ethernet164 9,10,11,12 hundredGigE1/42 41 +Ethernet168 29,30,31,32 hundredGigE1/43 42 +Ethernet172 25,26,27,28 hundredGigE1/44 43 +Ethernet176 45,46,47,48 hundredGigE1/45 44 +Ethernet180 41,42,43,44 hundredGigE1/46 45 +Ethernet184 125,126,127,128 hundredGigE1/47 46 +Ethernet188 121,122,123,124 hundredGigE1/48 47 +Ethernet192 137,138,139,140 hundredGigE1/49 48 +Ethernet196 141,142,143,144 hundredGigE1/50 49 +Ethernet200 217,218,219,220 hundredGigE1/51 50 +Ethernet204 221,222,223,224 hundredGigE1/52 51 +Ethernet208 233,234,235,236 hundredGigE1/53 52 +Ethernet212 237,238,239,240 hundredGigE1/54 53 +Ethernet216 249,250,251,252 hundredGigE1/55 54 +Ethernet220 253,254,255,256 hundredGigE1/56 55 +Ethernet224 153,154,155,156 hundredGigE1/57 56 +Ethernet228 157,158,159,160 hundredGigE1/58 57 +Ethernet232 169,170,171,172 hundredGigE1/59 58 +Ethernet236 173,174,175,176 hundredGigE1/60 59 +Ethernet240 185,186,187,188 hundredGigE1/61 60 +Ethernet244 189,190,191,192 hundredGigE1/62 61 +Ethernet248 201,202,203,204 hundredGigE1/63 62 +Ethernet252 205,206,207,208 hundredGigE1/64 63 diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/sai.profile b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/sai.profile new file mode 100644 index 000000000000..a1755e764616 --- /dev/null +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/sai.profile @@ -0,0 +1 @@ +SAI_INIT_CONFIG_FILE=/etc/bcm/th2-z9264f-64x100G.config.bcm diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/installer.conf b/device/dell/x86_64-dellemc_z9264f_c3538-r0/installer.conf new file mode 100644 index 000000000000..925a32fc0c3a --- /dev/null +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/installer.conf @@ -0,0 +1,3 @@ +CONSOLE_PORT=0x3f8 +CONSOLE_DEV=0 +CONSOLE_SPEED=115200 diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/led_proc_init.soc b/device/dell/x86_64-dellemc_z9264f_c3538-r0/led_proc_init.soc new file mode 100644 index 000000000000..d38282b6508e --- /dev/null +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/led_proc_init.soc @@ -0,0 +1,111 @@ +# LED microprocessor initialization for DellEMC-Z9264f + +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=32 REMAP_PORT_2=33 REMAP_PORT_1=34 REMAP_PORT_0=35 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=36 REMAP_PORT_6=37 REMAP_PORT_5=38 REMAP_PORT_4=39 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_11=4 REMAP_PORT_10=5 REMAP_PORT_9=6 REMAP_PORT_8=7 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=0 REMAP_PORT_14=1 REMAP_PORT_13=2 REMAP_PORT_12=3 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=56 REMAP_PORT_18=57 REMAP_PORT_17=58 REMAP_PORT_16=59 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=60 REMAP_PORT_22=61 REMAP_PORT_21=62 REMAP_PORT_20=63 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=28 REMAP_PORT_26=29 REMAP_PORT_25=30 REMAP_PORT_24=31 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=24 REMAP_PORT_30=25 REMAP_PORT_29=26 REMAP_PORT_28=27 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=48 REMAP_PORT_34=49 REMAP_PORT_33=50 REMAP_PORT_32=51 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=52 REMAP_PORT_38=53 REMAP_PORT_37=54 REMAP_PORT_36=55 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=20 REMAP_PORT_42=21 REMAP_PORT_41=22 REMAP_PORT_40=23 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=16 REMAP_PORT_46=17 REMAP_PORT_45=18 REMAP_PORT_44=19 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=40 REMAP_PORT_50=41 REMAP_PORT_49=42 REMAP_PORT_48=43 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=44 REMAP_PORT_54=45 REMAP_PORT_53=46 REMAP_PORT_52=47 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=12 REMAP_PORT_58=13 REMAP_PORT_57=14 REMAP_PORT_56=15 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=8 REMAP_PORT_62=9 REMAP_PORT_61=10 REMAP_PORT_60=11 +m CMIC_LEDUP1_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=0 REMAP_PORT_2=1 REMAP_PORT_1=2 REMAP_PORT_0=3 +m CMIC_LEDUP1_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=4 REMAP_PORT_6=5 REMAP_PORT_5=6 REMAP_PORT_4=7 +m CMIC_LEDUP1_PORT_ORDER_REMAP_8_11 REMAP_PORT_9=38 REMAP_PORT_8=39 REMAP_PORT_11=36 REMAP_PORT_10=37 +m CMIC_LEDUP1_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=32 REMAP_PORT_14=33 REMAP_PORT_13=34 REMAP_PORT_12=35 +m CMIC_LEDUP1_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=8 REMAP_PORT_18=9 REMAP_PORT_17=10 REMAP_PORT_16=11 +m CMIC_LEDUP1_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=12 REMAP_PORT_22=13 REMAP_PORT_21=14 REMAP_PORT_20=15 +m CMIC_LEDUP1_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=44 REMAP_PORT_26=45 REMAP_PORT_25=46 REMAP_PORT_24=47 +m CMIC_LEDUP1_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=40 REMAP_PORT_30=41 REMAP_PORT_29=42 REMAP_PORT_28=43 +m CMIC_LEDUP1_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=16 REMAP_PORT_34=17 REMAP_PORT_33=18 REMAP_PORT_32=19 +m CMIC_LEDUP1_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=20 REMAP_PORT_38=21 REMAP_PORT_37=22 REMAP_PORT_36=23 +m CMIC_LEDUP1_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=52 REMAP_PORT_42=53 REMAP_PORT_41=54 REMAP_PORT_40=55 +m CMIC_LEDUP1_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=48 REMAP_PORT_46=49 REMAP_PORT_45=50 REMAP_PORT_44=51 +m CMIC_LEDUP1_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=24 REMAP_PORT_50=25 REMAP_PORT_49=26 REMAP_PORT_48=27 +m CMIC_LEDUP1_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=28 REMAP_PORT_54=29 REMAP_PORT_53=30 REMAP_PORT_52=31 +m CMIC_LEDUP1_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=60 REMAP_PORT_58=61 REMAP_PORT_57=62 REMAP_PORT_56=63 +m CMIC_LEDUP1_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=56 REMAP_PORT_62=57 REMAP_PORT_61=58 REMAP_PORT_60=59 +m CMIC_LEDUP2_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=60 REMAP_PORT_2=61 REMAP_PORT_1=62 REMAP_PORT_0=63 +m CMIC_LEDUP2_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=56 REMAP_PORT_6=57 REMAP_PORT_5=58 REMAP_PORT_4=59 +m CMIC_LEDUP2_PORT_ORDER_REMAP_8_11 REMAP_PORT_11=24 REMAP_PORT_10=25 REMAP_PORT_9=26 REMAP_PORT_8=27 +m CMIC_LEDUP2_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=28 REMAP_PORT_14=29 REMAP_PORT_13=30 REMAP_PORT_12=31 +m CMIC_LEDUP2_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=52 REMAP_PORT_18=53 REMAP_PORT_17=54 REMAP_PORT_16=55 +m CMIC_LEDUP2_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=48 REMAP_PORT_22=49 REMAP_PORT_21=50 REMAP_PORT_20=51 +m CMIC_LEDUP2_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=16 REMAP_PORT_26=17 REMAP_PORT_25=18 REMAP_PORT_24=19 +m CMIC_LEDUP2_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=20 REMAP_PORT_30=21 REMAP_PORT_29=22 REMAP_PORT_28=23 +m CMIC_LEDUP2_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=44 REMAP_PORT_34=45 REMAP_PORT_33=46 REMAP_PORT_32=47 +m CMIC_LEDUP2_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=40 REMAP_PORT_38=41 REMAP_PORT_37=42 REMAP_PORT_36=43 +m CMIC_LEDUP2_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=8 REMAP_PORT_42=9 REMAP_PORT_41=10 REMAP_PORT_40=11 +m CMIC_LEDUP2_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=12 REMAP_PORT_46=13 REMAP_PORT_45=14 REMAP_PORT_44=15 +m CMIC_LEDUP2_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=36 REMAP_PORT_50=37 REMAP_PORT_49=38 REMAP_PORT_48=39 +m CMIC_LEDUP2_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=32 REMAP_PORT_54=33 REMAP_PORT_53=34 REMAP_PORT_52=35 +m CMIC_LEDUP2_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=0 REMAP_PORT_58=1 REMAP_PORT_57=2 REMAP_PORT_56=3 +m CMIC_LEDUP2_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=4 REMAP_PORT_62=5 REMAP_PORT_61=6 REMAP_PORT_60=7 +m CMIC_LEDUP3_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=28 REMAP_PORT_2=29 REMAP_PORT_1=30 REMAP_PORT_0=31 +m CMIC_LEDUP3_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=24 REMAP_PORT_6=25 REMAP_PORT_5=26 REMAP_PORT_4=27 +m CMIC_LEDUP3_PORT_ORDER_REMAP_8_11 REMAP_PORT_11=56 REMAP_PORT_10=57 REMAP_PORT_9=58 REMAP_PORT_8=59 +m CMIC_LEDUP3_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=60 REMAP_PORT_14=61 REMAP_PORT_13=62 REMAP_PORT_12=63 +m CMIC_LEDUP3_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=4 REMAP_PORT_18=5 REMAP_PORT_17=6 REMAP_PORT_16=7 +m CMIC_LEDUP3_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=0 REMAP_PORT_22=1 REMAP_PORT_21=2 REMAP_PORT_20=3 +m CMIC_LEDUP3_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=32 REMAP_PORT_26=33 REMAP_PORT_25=34 REMAP_PORT_24=35 +m CMIC_LEDUP3_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=36 REMAP_PORT_30=37 REMAP_PORT_29=38 REMAP_PORT_28=39 +m CMIC_LEDUP3_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=12 REMAP_PORT_34=13 REMAP_PORT_33=14 REMAP_PORT_32=15 +m CMIC_LEDUP3_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=8 REMAP_PORT_38=9 REMAP_PORT_37=10 REMAP_PORT_36=11 +m CMIC_LEDUP3_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=40 REMAP_PORT_42=41 REMAP_PORT_41=42 REMAP_PORT_40=43 +m CMIC_LEDUP3_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=44 REMAP_PORT_46=45 REMAP_PORT_45=46 REMAP_PORT_44=47 +m CMIC_LEDUP3_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=20 REMAP_PORT_50=21 REMAP_PORT_49=22 REMAP_PORT_48=23 +m CMIC_LEDUP3_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=16 REMAP_PORT_54=17 REMAP_PORT_53=18 REMAP_PORT_52=19 +m CMIC_LEDUP3_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=48 REMAP_PORT_58=49 REMAP_PORT_57=50 REMAP_PORT_56=51 +m CMIC_LEDUP3_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=52 REMAP_PORT_62=53 REMAP_PORT_61=54 REMAP_PORT_60=55 +m CMIC_LEDUP4_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=1 REMAP_PORT_1=0 + +led 0 stop +led 0 prog \ + 02 00 60 FE 2E FE 67 1C 86 FE 06 FE D2 40 71 04 \ + 12 FF 85 05 D2 05 71 1A 52 00 3A 80 32 08 97 71 \ + 23 77 4B 32 00 32 01 B7 97 75 32 12 BC FE FE 02 \ + 0A 50 12 BC FE FE 95 75 3C 85 77 44 16 FF DA 02 \ + 71 4B 77 44 22 0F 87 22 0E 87 57 22 0E 87 22 0E \ + 87 57 22 0E 87 22 0F 87 57 00 00 00 00 00 00 00 +led 0 auto on +led 0 start + +led 1 stop +led 1 prog \ + 02 00 60 FE 2E FE 67 1C 86 FE 06 FE D2 40 71 04 \ + 12 FF 85 05 D2 05 71 1A 52 00 3A 80 32 08 97 71 \ + 23 77 4B 32 00 32 01 B7 97 75 32 12 BC FE FE 02 \ + 0A 50 12 BC FE FE 95 75 3C 85 77 44 16 FF DA 02 \ + 71 4B 77 44 22 0F 87 22 0E 87 57 22 0E 87 22 0E \ + 87 57 22 0E 87 22 0F 87 57 00 00 00 00 00 00 00 +led 1 auto on +led 1 start + +led 2 stop +led 2 prog \ + 02 00 60 FE 2E FE 67 1C 86 FE 06 FE D2 40 71 04 \ + 12 FF 85 05 D2 05 71 1A 52 00 3A 80 32 08 97 71 \ + 23 77 4B 32 00 32 01 B7 97 75 32 12 BC FE FE 02 \ + 0A 50 12 BC FE FE 95 75 3C 85 77 44 16 FF DA 02 \ + 71 4B 77 44 22 0F 87 22 0E 87 57 22 0E 87 22 0E \ + 87 57 22 0E 87 22 0F 87 57 00 00 00 00 00 00 00 +led 2 auto on +led 2 start + +led 3 stop +led 3 prog \ + 02 00 60 FE 2E FE 67 1C 86 FE 06 FE D2 40 71 04 \ + 12 FF 85 05 D2 05 71 1A 52 00 3A 80 32 08 97 71 \ + 23 77 4B 32 00 32 01 B7 97 75 32 12 BC FE FE 02 \ + 0A 50 12 BC FE FE 95 75 3C 85 77 44 16 FF DA 02 \ + 71 4B 77 44 22 0F 87 22 0E 87 57 22 0E 87 22 0E \ + 87 57 22 0E 87 22 0F 87 57 00 00 00 00 00 00 00 +led 3 auto on +led 3 start diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/minigraph.xml b/device/dell/x86_64-dellemc_z9264f_c3538-r0/minigraph.xml new file mode 100644 index 000000000000..ba95944260df --- /dev/null +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/minigraph.xml @@ -0,0 +1,1541 @@ + + + + + + ARISTA01T0 + 10.0.0.33 + sonic + 10.0.0.32 + 1 + 10 + 3 + + + ARISTA01T0 + FC00::42 + sonic + FC00::41 + 1 + 10 + 3 + + + sonic + 10.0.0.0 + ARISTA01T2 + 10.0.0.1 + 1 + 10 + 3 + + + sonic + FC00::1 + ARISTA01T2 + FC00::2 + 1 + 10 + 3 + + + ARISTA02T0 + 10.0.0.35 + sonic + 10.0.0.34 + 1 + 10 + 3 + + + ARISTA02T0 + FC00::46 + sonic + FC00::45 + 1 + 10 + 3 + + + sonic + 10.0.0.2 + ARISTA02T2 + 10.0.0.3 + 1 + 10 + 3 + + + ARISTA04T1 + FC00::1A + sonic + FC00::19 + 1 + 180 + 60 + + + + + 65100 + sonic + + +
10.0.0.33
+ + + + +
10.0.0.1
+ + + + + BGPPeer +
10.0.0.5
+ + + + + BGPPeer +
10.0.0.9
+ + + + + BGPPeer +
10.0.0.13
+ + + + + BGPPeer +
FC00::2
+ + + + +
10.0.0.27
+ + + + +
10.0.0.61
+ + + + +
10.0.0.29
+ + + + +
10.0.0.63
+ + + + +
10.0.0.31
+ + + + + + + + 64001 + ARISTA01T0 + + + + 65200 + ARISTA01T2 + + + + 64002 + ARISTA02T0 + + + + 65200 + ARISTA02T2 + + + + 64003 + ARISTA03T0 + + + + + + + + + + HostIP + Loopback0 + + 10.1.0.32/32 + + 10.1.0.32/32 + + + HostIP1 + Loopback0 + + FC00:1::32/128 + + FC00:1::32/128 + + + + + + + + sonic + + + + + IPInterface + + hundredGigE1/1 + 10.0.0.1/31 + + + + hundredGigE1/1 + FC00::1/1 + + + + hundredGigE1/2 + 10.0.0.3/31 + + + + hundredGigE1/1 + FC00::1/5 + + + + hundredGigE1/3 + 10.0.0.5/31 + + + + hundredGigE1/1 + FC00::1/9 + + + + hundredGigE1/4 + 10.0.0.7/31 + + + + hundredGigE1/1 + FC00::1/D + + + + hundredGigE1/5 + 10.0.0.9/31 + + + + hundredGigE1/1 + FC00::1/11 + + + + hundredGigE1/6 + 10.0.0.11/31 + + + + hundredGigE1/1 + FC00::1/15 + + + + hundredGigE1/7 + 10.0.0.13/31 + + + + hundredGigE1/1 + FC00::1/19 + + + + hundredGigE1/8 + 10.0.0.15/31 + + + + hundredGigE1/1 + FC00::1/1D + + + + hundredGigE1/9 + 10.0.0.17/31 + + + + hundredGigE1/1 + FC00::1/21 + + + + hundredGigE1/10 + 10.0.0.19/31 + + + + hundredGigE1/1 + FC00::1/25 + + + + hundredGigE1/11 + 10.0.0.21/31 + + + + hundredGigE1/1 + FC00::1/29 + + + + hundredGigE1/12 + 10.0.0.23/31 + + + + hundredGigE1/1 + FC00::1/2D + + + + hundredGigE1/13 + 10.0.0.25/31 + + + + hundredGigE1/1 + FC00::1/31 + + + + hundredGigE1/14 + 10.0.0.27/31 + + + + hundredGigE1/1 + FC00::1/35 + + + + hundredGigE1/15 + 10.0.0.29/31 + + + + hundredGigE1/1 + FC00::1/39 + + + + hundredGigE1/16 + 10.0.0.31/31 + + + + hundredGigE1/1 + FC00::1/3D + + + + hundredGigE1/17 + 10.0.0.33/31 + + + + hundredGigE1/1 + FC00::1/41 + + + + hundredGigE1/18 + 10.0.0.35/31 + + + + hundredGigE1/1 + FC00::1/45 + + + + hundredGigE1/19 + 10.0.0.37/31 + + + + hundredGigE1/1 + FC00::1/49 + + + + hundredGigE1/20 + 10.0.0.39/31 + + + + hundredGigE1/1 + FC00::1/4D + + + + hundredGigE1/21 + 10.0.0.41/31 + + + + hundredGigE1/1 + FC00::1/51 + + + + hundredGigE1/22 + 10.0.0.43/31 + + + + hundredGigE1/1 + FC00::1/55 + + + + hundredGigE1/23 + 10.0.0.45/31 + + + + hundredGigE1/1 + FC00::1/59 + + + + hundredGigE1/24 + 10.0.0.47/31 + + + + hundredGigE1/1 + FC00::1/5D + + + + hundredGigE1/25 + 10.0.0.49/31 + + + + hundredGigE1/1 + FC00::1/61 + + + + hundredGigE1/26 + 10.0.0.51/31 + + + + hundredGigE1/1 + FC00::1/65 + + + + hundredGigE1/27 + 10.0.0.53/31 + + + + hundredGigE1/1 + FC00::1/69 + + + + hundredGigE1/28 + 10.0.0.55/31 + + + + hundredGigE1/1 + FC00::1/6D + + + + hundredGigE1/29 + 10.0.0.57/31 + + + + hundredGigE1/1 + FC00::1/71 + + + + hundredGigE1/30 + 10.0.0.59/31 + + + + hundredGigE1/1 + FC00::1/75 + + + IPInterface + + hundredGigE1/31 + 10.0.0.61/31 + + + + hundredGigE1/1 + FC00::1/79 + + + IPInterface + + hundredGigE1/32 + 10.0.0.63/31 + + + + hundredGigE1/1 + FC00::1/7D + + + IPInterface + + hundredGigE1/33 + 10.0.0.65/31 + + + + hundredGigE1/1 + FC00::1/81 + + + + hundredGigE1/34 + 10.0.0.67/31 + + + + hundredGigE1/1 + FC00::1/85 + + + IPInterface + + hundredGigE1/35 + 10.0.0.69/31 + + + + hundredGigE1/1 + FC00::1/89 + + + IPInterface + + hundredGigE1/36 + 10.0.0.71/31 + + + + hundredGigE1/1 + FC00::1/8D + + + IPInterface + + hundredGigE1/37 + 10.0.0.73/31 + + + + hundredGigE1/1 + FC00::1/91 + + + + hundredGigE1/38 + 10.0.0.75/31 + + + + hundredGigE1/1 + FC00::1/95 + + + + hundredGigE1/39 + 10.0.0.77/31 + + + + hundredGigE1/1 + FC00::1/99 + + + + hundredGigE1/40 + 10.0.0.79/31 + + + + hundredGigE1/1 + FC00::1/9D + + + + hundredGigE1/41 + 10.0.0.81/31 + + + + hundredGigE1/1 + FC00::1/A1 + + + + hundredGigE1/42 + 10.0.0.83/31 + + + + hundredGigE1/1 + FC00::1/A5 + + + + hundredGigE1/43 + 10.0.0.85/31 + + + + hundredGigE1/1 + FC00::1/A9 + + + + hundredGigE1/44 + 10.0.0.87/31 + + + + hundredGigE1/1 + FC00::1/AD + + + + hundredGigE1/45 + 10.0.0.89/31 + + + + hundredGigE1/1 + FC00::1/B1 + + + + hundredGigE1/46 + 10.0.0.91/31 + + + + hundredGigE1/1 + FC00::1/B5 + + + + hundredGigE1/47 + 10.0.0.93/31 + + + + hundredGigE1/1 + FC00::1/B9 + + + + hundredGigE1/48 + 10.0.0.95/31 + + + + hundredGigE1/1 + FC00::1/BD + + + + hundredGigE1/49 + 10.0.0.97/31 + + + + hundredGigE1/1 + FC00::1/C1 + + + + hundredGigE1/50 + 10.0.0.99/31 + + + + hundredGigE1/1 + FC00::1/C5 + + + + hundredGigE1/51 + 10.0.0.101/31 + + + + hundredGigE1/1 + FC00::1/C9 + + + + hundredGigE1/52 + 10.0.0.103/31 + + + + hundredGigE1/1 + FC00::1/CD + + + + hundredGigE1/53 + 10.0.0.105/31 + + + + hundredGigE1/1 + FC00::1/D1 + + + + hundredGigE1/54 + 10.0.0.107/31 + + + + hundredGigE1/1 + FC00::1/D5 + + + + hundredGigE1/55 + 10.0.0.109/31 + + + + hundredGigE1/1 + FC00::1/D9 + + + + hundredGigE1/56 + 10.0.0.111/31 + + + + hundredGigE1/1 + FC00::1/DD + + + + hundredGigE1/57 + 10.0.0.113/31 + + + + hundredGigE1/1 + FC00::1/E1 + + + + hundredGigE1/58 + 10.0.0.115/31 + + + + hundredGigE1/1 + FC00::1/E5 + + + + hundredGigE1/59 + 10.0.0.117/31 + + + + hundredGigE1/1 + FC00::1/E9 + + + + hundredGigE1/60 + 10.0.0.119/31 + + + + hundredGigE1/1 + FC00::1/ED + + + + hundredGigE1/61 + 10.0.0.121/31 + + + + hundredGigE1/1 + FC00::1/F1 + + + + hundredGigE1/62 + 10.0.0.123/31 + + + + hundredGigE1/1 + FC00::1/F5 + + + + hundredGigE1/63 + 10.0.0.125/31 + + + + hundredGigE1/1 + FC00::1/F9 + + + + hundredGigE1/64 + 10.0.0.127/31 + + + + hundredGigE1/1 + FC00::1/FD + + + + + + + + + + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet1 + true + sonic + hundredGigE1/1 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet2 + true + sonic + hundredGigE1/2 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet3 + true + sonic + hundredGigE1/3 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet4 + true + sonic + hundredGigE1/4 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet5 + true + sonic + hundredGigE1/5 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet6 + true + sonic + hundredGigE1/6 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet7 + true + sonic + hundredGigE1/7 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet8 + true + sonic + hundredGigE1/8 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet9 + true + sonic + hundredGigE1/9 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet10 + true + sonic + hundredGigE1/10 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet11 + true + sonic + hundredGigE1/11 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet12 + true + sonic + hundredGigE1/12 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet13 + true + sonic + hundredGigE1/13 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet14 + true + sonic + hundredGigE1/14 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet15 + true + sonic + hundredGigE1/15 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet16 + true + sonic + hundredGigE1/16 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet17 + true + sonic + hundredGigE1/17 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet18 + true + sonic + hundredGigE1/18 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet19 + true + sonic + hundredGigE1/19 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet20 + true + sonic + hundredGigE1/20 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet21 + true + sonic + hundredGigE1/21 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet22 + true + sonic + hundredGigE1/22 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet23 + true + sonic + hundredGigE1/23 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet24 + true + sonic + hundredGigE1/24 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet25 + true + sonic + hundredGigE1/25 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet26 + true + sonic + hundredGigE1/26 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet27 + true + sonic + hundredGigE1/27 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet28 + true + sonic + hundredGigE1/28 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet29 + true + sonic + hundredGigE1/29 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet30 + true + sonic + hundredGigE1/30 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet31 + true + sonic + hundredGigE1/31 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet32 + true + sonic + hundredGigE1/32 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet33 + true + sonic + hundredGigE1/33 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet34 + true + sonic + hundredGigE1/34 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet35 + true + sonic + hundredGigE1/35 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet36 + true + sonic + hundredGigE1/36 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet37 + true + sonic + hundredGigE1/37 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet38 + true + sonic + hundredGigE1/38 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet39 + true + sonic + hundredGigE1/39 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet40 + true + sonic + hundredGigE1/40 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet41 + true + sonic + hundredGigE1/41 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet42 + true + sonic + hundredGigE1/42 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet43 + true + sonic + hundredGigE1/43 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet44 + true + sonic + hundredGigE1/44 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet45 + true + sonic + hundredGigE1/45 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet46 + true + sonic + hundredGigE1/46 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet47 + true + sonic + hundredGigE1/47 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet48 + true + sonic + hundredGigE1/48 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet49 + true + sonic + hundredGigE1/49 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet50 + true + sonic + hundredGigE1/50 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet51 + true + sonic + hundredGigE1/51 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet52 + true + sonic + hundredGigE1/52 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet53 + true + sonic + hundredGigE1/53 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet54 + true + sonic + hundredGigE1/54 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet55 + true + sonic + hundredGigE1/55 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet56 + true + sonic + hundredGigE1/56 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet57 + true + sonic + hundredGigE1/57 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet58 + true + sonic + hundredGigE1/58 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet59 + true + sonic + hundredGigE1/59 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet60 + true + sonic + hundredGigE1/60 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet61 + true + sonic + hundredGigE1/61 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet62 + true + sonic + hundredGigE1/62 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet63 + true + sonic + hundredGigE1/63 + + + DeviceInterfaceLink + true + 100000 + ARISTA01T1 + Ethernet64 + true + sonic + hundredGigE1/64 + + + + + sonic + DellEMC-Z9264f + + 10.11.150.26 + + + + + + + + sonic + + + DhcpResources + + + + + SnmpResources + + 10.0.0.9 + + + SyslogResources + + 10.0.0.5;10.0.0.6 + + + ErspanDestinationIpv4 + + 10.0.0.7 + + + + + + + sonic + DellEMC-Z9264f + diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/eeprom.py b/device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/eeprom.py new file mode 100644 index 000000000000..37ce00a0ca6c --- /dev/null +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/eeprom.py @@ -0,0 +1,22 @@ +#!/usr/bin/env python + +############################################################################# +# DellEMC Z9264f +# +# Platform and model specific eeprom subclass, inherits from the base class, +# and provides the followings: +# - the eeprom format definition +# - specific encoder/decoder if there is special need +############################################################################# + +try: + from sonic_eeprom import eeprom_tlvinfo +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + + +class board(eeprom_tlvinfo.TlvInfoDecoder): + + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/sys/class/i2c-adapter/i2c-0/0-0053/eeprom" + super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/psuutil.py b/device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/psuutil.py new file mode 100644 index 000000000000..d3fe5cf64240 --- /dev/null +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/psuutil.py @@ -0,0 +1,97 @@ +# +# psuutil.py +# Platform-specific PSU status interface for SONiC +# + + +import os.path +import logging +import commands + + +Z9264F_MAX_PSUS = 2 +IPMI_SENSOR_DATA = "ipmitool sdr list" +PSU_PRESENCE = "PSU{0}_state" +# Use this for older firmware +# PSU_PRESENCE="PSU{0}_prsnt" +ipmi_sdr_list = "" + + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError(str(e) + "- required module not found") + + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + def __init__(self): + PsuBase.__init__(self) + + # Fetch a BMC register + def get_pmc_register(self, reg_name): + + status = 1 + global ipmi_sdr_list + ipmi_dev_node = "/dev/pmi0" + + ipmi_cmd = IPMI_SENSOR_DATA + status, ipmi_sdr_list = commands.getstatusoutput(ipmi_cmd) + + if status: + logging.error('Failed to execute:' + ipmi_sdr_list) + sys.exit(0) + + for item in ipmi_sdr_list.split("\n"): + if reg_name in item: + output = item.strip() + + if not output: + print('\nFailed to fetch: ' + reg_name + ' sensor ') + sys.exit(0) + + output = output.split('|')[1] + + logging.basicConfig(level=logging.DEBUG) + return output + + + + def get_num_psus(self): + """ + Retrieves the number of PSUs available on the device + :return: An integer, the number of PSUs available on the device + """ + Z9264F_MAX_PSUS = 2 + return Z9264F_MAX_PSUS + + def get_psu_status(self, index): + """ + Retrieves the oprational status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is operating properly, False if PSU is\ + faulty + """ + #Until psu_status is implemented this is hardcoded temporarily + + status = 1 + return status + + + def get_psu_presence(self, index): + """ + Retrieves the presence status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is plugged, False if not + """ + status = 0 + psu_reg_name = PSU_PRESENCE.format(index) + psu_status = int(self.get_pmc_register(psu_reg_name),16) + if (psu_status != 'ERR'): + # Check for PSU presence + if (psu_status): + status = 1 + return status diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/sfputil.py b/device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/sfputil.py new file mode 100644 index 000000000000..84a5e153b304 --- /dev/null +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/plugins/sfputil.py @@ -0,0 +1,192 @@ +# sfputil.py +# +# Platform-specific SFP transceiver interface for SONiC +# + +try: + import struct + import sys + import getopt + import time + from sonic_sfp.sfputilbase import SfpUtilBase + from os import * + from mmap import * + +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + + PORT_START = 0 + PORT_END = 63 + PORTS_IN_BLOCK = 32 + + BASE_RES_PATH = "/sys/bus/pci/devices/0000:04:00.0/resource0" + + _port_to_eeprom_mapping = {} + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_ports(self): + return range(0, self.PORTS_IN_BLOCK + 1) + + @property + def port_to_eeprom_mapping(self): + return self._port_to_eeprom_mapping + + def pci_mem_read(self, mm, offset): + mm.seek(offset) + read_data_stream=mm.read(4) + reg_val=struct.unpack('I',read_data_stream) + mem_val = str(reg_val)[1:-2] + # print "reg_val read:%x"%reg_val + return mem_val + + def pci_mem_write(self, mm, offset, data): + mm.seek(offset) + # print "data to write:%x"%data + mm.write(struct.pack('I',data)) + + def pci_set_value(self, resource, val, offset): + fd=open(resource,O_RDWR) + mm=mmap(fd,0) + return self.pci_mem_write(mm,offset,val) + + def pci_get_value(self, resource, offset): + fd=open(resource,O_RDWR) + mm=mmap(fd,0) + return self.pci_mem_read(mm, offset) + + def __init__(self): + eeprom_path = "/sys/class/i2c-adapter/i2c-{0}/{0}-0050/eeprom" + + for x in range(0, self.port_end + 1): + port_num = x + 2 + self.port_to_eeprom_mapping[x] = eeprom_path.format( + port_num) + port_num = 0 + + SfpUtilBase.__init__(self) + + def get_presence(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + # Port offset starts with 0x4004 + port_offset = 16388 + ((port_num) * 16) + + status = self.pci_get_value(self.BASE_RES_PATH, port_offset) + reg_value = int(status) + + # Absence of status throws error + if (reg_value == "" ): + return False + + # Mask off 4th bit for presence + mask = (1 << 4) + + # ModPrsL is active low + if reg_value & mask == 0: + return True + + return False + + def get_low_power_mode(self, port_num): + + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + # Port offset starts with 0x4000 + port_offset = 16384 + ((port_num) * 16) + + status = self.pci_get_value(self.BASE_RES_PATH, port_offset) + reg_value = int(status) + + # Absence of status throws error + if (reg_value == "" ): + return False + + # Mask off 4th bit for presence + mask = (1 << 6) + + # LPMode is active high + if reg_value & mask == 0: + return False + + return True + + def set_low_power_mode(self, port_num, lpmode): + + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + # Port offset starts with 0x4000 + port_offset = 16384 + ((port_num) * 16) + + status = self.pci_get_value(self.BASE_RES_PATH, port_offset) + reg_value = int(status) + + # Absence of status throws error + if (reg_value == "" ): + return False + + # Mask off 4th bit for presence + mask = (1 << 6) + + # LPMode is active high; set or clear the bit accordingly + if lpmode is True: + reg_value = reg_value | mask + else: + reg_value = reg_value & ~mask + + # Convert our register value back to a hex string and write back + status = self.pci_set_value(self.BASE_RES_PATH, reg_value, port_offset) + + return True + + def reset(self, port_num): + + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + # Port offset starts with 0x4000 + port_offset = 16384 + ((port_num) * 16) + + status = self.pci_get_value(self.BASE_RES_PATH, port_offset) + reg_value = int(status) + + # Absence of status throws error + if (reg_value == "" ): + return False + + # Mask off 4th bit for presence + mask = (1 << 6) + + # ResetL is active low + reg_value = reg_value & ~mask + + # Convert our register value back to a hex string and write back + status = self.pci_set_value(self.BASE_RES_PATH, reg_value, port_offset) + + # Sleep 1 second to allow it to settle + time.sleep(1) + + reg_value = reg_value | mask + + # Convert our register value back to a hex string and write back + status = self.pci_set_value(self.BASE_RES_PATH, reg_value, port_offset) + + return True diff --git a/dockers/docker-platform-monitor/Dockerfile.j2 b/dockers/docker-platform-monitor/Dockerfile.j2 index c53ed494c474..d7cb6a46f5f3 100755 --- a/dockers/docker-platform-monitor/Dockerfile.j2 +++ b/dockers/docker-platform-monitor/Dockerfile.j2 @@ -10,7 +10,7 @@ ENV DEBIAN_FRONTEND=noninteractive RUN apt-get update # Install required packages -RUN apt-get install -y python-pip libpython2.7 sensord fancontrol +RUN apt-get install -y python-pip libpython2.7 sensord fancontrol ipmitool {% if docker_platform_monitor_debs.strip() -%} # Copy locally-built Debian package dependencies diff --git a/files/build_templates/docker_image_ctl.j2 b/files/build_templates/docker_image_ctl.j2 index e1873851c9c4..61f32f16b7b9 100644 --- a/files/build_templates/docker_image_ctl.j2 +++ b/files/build_templates/docker_image_ctl.j2 @@ -21,6 +21,17 @@ function postStartAction() rm -fr /host/fast-reboot fi docker exec swss touch /ready # signal swssconfig.sh to go +{%- elif docker_container_name == "pmon" %} + + DEVPATH="/usr/share/sonic/device" + REBOOT="platform_reboot" + PSENSOR="/usr/local/bin/platform_sensors.py" + if [ -d ${DEVPATH}/${PLATFORM} ] && [ -f $PSENSOR ]; then + exist=`docker exec -i pmon ls /usr/bin/platform_sensors.py "$@" 2>/dev/null` + if [ -z "$exist" ]; then + docker cp $PSENSOR pmon:/usr/bin/ + fi + fi {%- elif docker_container_name == "snmp" %} docker exec -i database redis-cli -n 6 HSET 'DEVICE_METADATA|localhost' chassis_serial_number $(decode-syseeprom -s) {%- else %} diff --git a/platform/broadcom/one-image.mk b/platform/broadcom/one-image.mk index b009706a7850..26ac0506aa71 100755 --- a/platform/broadcom/one-image.mk +++ b/platform/broadcom/one-image.mk @@ -5,6 +5,7 @@ $(SONIC_ONE_IMAGE)_MACHINE = broadcom $(SONIC_ONE_IMAGE)_IMAGE_TYPE = onie $(SONIC_ONE_IMAGE)_INSTALLS += $(BRCM_OPENNSL_KERNEL) $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(DELL_S6000_PLATFORM_MODULE) \ + $(DELL_Z9264F_PLATFORM_MODULE) \ $(DELL_Z9100_PLATFORM_MODULE) \ $(DELL_S6100_PLATFORM_MODULE) \ $(INGRASYS_S8900_54XC_PLATFORM_MODULE) \ diff --git a/platform/broadcom/platform-modules-dell.mk b/platform/broadcom/platform-modules-dell.mk index a6b2a9c2c365..a2d051ffd911 100644 --- a/platform/broadcom/platform-modules-dell.mk +++ b/platform/broadcom/platform-modules-dell.mk @@ -1,8 +1,10 @@ -# Dell Z9100 and S6100 Platform modules +# Dell Z9100, S6100, Z9264F Platform modules +DELL_Z9264F_PLATFORM_MODULE_VERSION = 1.1 DELL_Z9100_PLATFORM_MODULE_VERSION = 1.1 DELL_S6100_PLATFORM_MODULE_VERSION = 1.1 +export DELL_Z9264F_PLATFORM_MODULE_VERSION export DELL_Z9100_PLATFORM_MODULE_VERSION export DELL_S6100_PLATFORM_MODULE_VERSION @@ -16,4 +18,9 @@ DELL_S6100_PLATFORM_MODULE = platform-modules-s6100_$(DELL_S6100_PLATFORM_MODULE $(DELL_S6100_PLATFORM_MODULE)_PLATFORM = x86_64-dell_s6100_c2538-r0 $(eval $(call add_extra_package,$(DELL_Z9100_PLATFORM_MODULE),$(DELL_S6100_PLATFORM_MODULE))) +DELL_Z9264F_PLATFORM_MODULE = platform-modules-z9264f_$(DELL_Z9264F_PLATFORM_MODULE_VERSION)_amd64.deb +$(DELL_Z9264F_PLATFORM_MODULE)_PLATFORM = x86_64-dellemc_z9264f_c3538-r0 +$(eval $(call add_extra_package,$(DELL_Z9100_PLATFORM_MODULE),$(DELL_Z9264F_PLATFORM_MODULE))) + + SONIC_STRETCH_DEBS += $(DELL_Z9100_PLATFORM_MODULE) diff --git a/platform/broadcom/sonic-platform-modules-dell b/platform/broadcom/sonic-platform-modules-dell index 31993888a172..6cfea2267688 160000 --- a/platform/broadcom/sonic-platform-modules-dell +++ b/platform/broadcom/sonic-platform-modules-dell @@ -1 +1 @@ -Subproject commit 31993888a17291eb28ef674d6e2c973c539e806d +Subproject commit 6cfea2267688b7fb5cd11a867057ed264a01502c From f7c16e3eba67d638717a8367f36140aff6f540f6 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Tue, 10 Jul 2018 18:06:03 +0000 Subject: [PATCH 108/180] [devices]: change celestica platform modules version back to 0.6 --- platform/broadcom/platform-modules-cel.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platform/broadcom/platform-modules-cel.mk b/platform/broadcom/platform-modules-cel.mk index 234f2d5399ef..792970fc4397 100644 --- a/platform/broadcom/platform-modules-cel.mk +++ b/platform/broadcom/platform-modules-cel.mk @@ -1,6 +1,6 @@ # Celestica DX010 Platform modules -CEL_DX010_PLATFORM_MODULE_VERSION = 0.8 +CEL_DX010_PLATFORM_MODULE_VERSION = 0.6 export CEL_DX010_PLATFORM_MODULE_VERSION From 39b0e801ca58a2984bd4aeb435d39bbf688ef4c0 Mon Sep 17 00:00:00 2001 From: yurypm Date: Sat, 14 Jul 2018 21:11:22 +0100 Subject: [PATCH 109/180] [device] Update arista driver submodule (#38) * [device] Update arista driver submodule * Set Arista scd driver config Set ARISTA_SCD_DRIVER_CONFIG config to build and include scd driver to resulting Arista deb packages --- platform/broadcom/platform-modules-arista.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/platform/broadcom/platform-modules-arista.mk b/platform/broadcom/platform-modules-arista.mk index 480aa0cf8396..73d86bda4e33 100644 --- a/platform/broadcom/platform-modules-arista.mk +++ b/platform/broadcom/platform-modules-arista.mk @@ -23,3 +23,5 @@ export ARISTA_PLATFORM_MODULE ARISTA_PLATFORM_MODULE_PYTHON2 ARISTA_PLATFORM_MOD export ARISTA_SCD_DRIVER_CONFIG=m SONIC_STRETCH_DEBS += $(ARISTA_PLATFORM_MODULE) + +export ARISTA_SCD_DRIVER_CONFIG=m From 16e16f550645cd3222bd21fbaa091edfd0416320 Mon Sep 17 00:00:00 2001 From: Marian Pritsak Date: Sat, 30 Dec 2017 06:39:58 +0200 Subject: [PATCH 110/180] [Mellanox]: Update recipe for hw-management (#4) Update package revision Create submodule for sources Signed-off-by: marian-pritsak --- platform/mellanox/hw-management | 1 + 1 file changed, 1 insertion(+) create mode 160000 platform/mellanox/hw-management diff --git a/platform/mellanox/hw-management b/platform/mellanox/hw-management new file mode 160000 index 000000000000..ff83e6490d5c --- /dev/null +++ b/platform/mellanox/hw-management @@ -0,0 +1 @@ +Subproject commit ff83e6490d5c36fff6bfb17781119b52e234f5f6 From 46b0847339b211ec428f548190a9f826e0cb3d14 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 30 Jul 2018 17:42:13 +0000 Subject: [PATCH 111/180] [baseimage]: use original stretch bash in the base image --- files/build_templates/sonic_debian_extension.j2 | 5 ----- 1 file changed, 5 deletions(-) diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index 0faaa5582ea6..62637446dda2 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -102,11 +102,6 @@ sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/python-click*_all.deb || \ sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/python-sonic-utilities_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f -# Install customized bash version to patch memory-leak issue. This instruction shall be removed -# once the migration to Debian-9 (Stretch) is completed. -sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/bash_*.deb || \ - sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f - # SONiC utilities installs bash-completion as a dependency. However, it is disabled by default # in bash.bashrc, so we copy a version of the file with it enabled here. sudo cp -f $IMAGE_CONFIGS/bash/bash.bashrc $FILESYSTEM_ROOT/etc/ From a32b7412c38c15930c0e5c2d61fb6e5208340128 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 30 Jul 2018 22:55:13 +0000 Subject: [PATCH 112/180] [kernel]: update sonic linux kernel submodule * 70fdaa2 2018-06-30 | Support Delta DPS1900 (#49) (HEAD -> stretch, origin/stretch) [Deni] * 77895c5 2018-04-17 | Add kexec reboot string (#46) [Joe LeVeque] --- src/sonic-linux-kernel | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-linux-kernel b/src/sonic-linux-kernel index a21a592baf4b..70fdaa224c13 160000 --- a/src/sonic-linux-kernel +++ b/src/sonic-linux-kernel @@ -1 +1 @@ -Subproject commit a21a592baf4b189591f63fe7930f7d889bccd57a +Subproject commit 70fdaa224c1373682be871c084bf0f590bfafd8f From b8a01dc3b4e59b806f54e1fa2bcdfd329aba1df9 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 5 Aug 2018 06:17:46 +0000 Subject: [PATCH 113/180] [build]: add .gitignore for cel, delta and inventec Signed-off-by: Guohan Lu --- .../sonic-platform-modules-cel/.gitignore | 29 ++++++++- .../sonic-platform-modules-delta/.gitignore | 59 +++++++++++++++++++ .../.gitignore | 59 +++++++++++++++++++ 3 files changed, 144 insertions(+), 3 deletions(-) create mode 100644 platform/broadcom/sonic-platform-modules-delta/.gitignore create mode 100644 platform/broadcom/sonic-platform-modules-inventec/.gitignore diff --git a/platform/broadcom/sonic-platform-modules-cel/.gitignore b/platform/broadcom/sonic-platform-modules-cel/.gitignore index 988e49257d47..2490baa9d1e2 100644 --- a/platform/broadcom/sonic-platform-modules-cel/.gitignore +++ b/platform/broadcom/sonic-platform-modules-cel/.gitignore @@ -1,15 +1,20 @@ +# Prerequisites +*.d + # Object files *.o *.ko *.obj *.elf +# Linker output +*.ilk +*.map +*.exp + # Precompiled Headers *.gch *.pch -*.mod.c -*.ko.cmd -*.o.cmd # Libraries *.lib @@ -34,3 +39,21 @@ # Debug files *.dSYM/ *.su +*.idb +*.pdb + +# Kernel Module Compile Results +*.mod* +*.cmd +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf + +# Debian packaging +*.debhelper.log +*.postinst.debhelper +*.postrm.debhelper +*.prerm.debhelper +*.substvars diff --git a/platform/broadcom/sonic-platform-modules-delta/.gitignore b/platform/broadcom/sonic-platform-modules-delta/.gitignore new file mode 100644 index 000000000000..2490baa9d1e2 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-delta/.gitignore @@ -0,0 +1,59 @@ +# Prerequisites +*.d + +# Object files +*.o +*.ko +*.obj +*.elf + +# Linker output +*.ilk +*.map +*.exp + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su +*.idb +*.pdb + +# Kernel Module Compile Results +*.mod* +*.cmd +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf + +# Debian packaging +*.debhelper.log +*.postinst.debhelper +*.postrm.debhelper +*.prerm.debhelper +*.substvars diff --git a/platform/broadcom/sonic-platform-modules-inventec/.gitignore b/platform/broadcom/sonic-platform-modules-inventec/.gitignore new file mode 100644 index 000000000000..2490baa9d1e2 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/.gitignore @@ -0,0 +1,59 @@ +# Prerequisites +*.d + +# Object files +*.o +*.ko +*.obj +*.elf + +# Linker output +*.ilk +*.map +*.exp + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su +*.idb +*.pdb + +# Kernel Module Compile Results +*.mod* +*.cmd +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf + +# Debian packaging +*.debhelper.log +*.postinst.debhelper +*.postrm.debhelper +*.prerm.debhelper +*.substvars From 8e0f1f526fbcdcb2592da0c418d6c29ee7e4e168 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 5 Aug 2018 06:21:23 +0000 Subject: [PATCH 114/180] [celestica]: update dx010 fan driver to support fault alarm Signed-off-by: Guohan Lu --- .../sonic-platform-modules-cel/dx010/modules/emc2305.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/emc2305.c b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/emc2305.c index f08033e080ce..b406a29fd9be 100644 --- a/platform/broadcom/sonic-platform-modules-cel/dx010/modules/emc2305.c +++ b/platform/broadcom/sonic-platform-modules-cel/dx010/modules/emc2305.c @@ -448,6 +448,14 @@ show_fan_div(struct device *dev, struct device_attribute *da, char *buf) return sprintf(buf, "%d\n", fan_div); } +static ssize_t +show_fan_alarm(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + bool fault = ((fan->tach & 0x1fe0) == 0x1fe0); + return sprintf(buf, "%d\n", fault ? 1 : 0); +} + static ssize_t set_fan_div(struct device *dev, struct device_attribute *da, const char *buf, size_t count) @@ -577,6 +585,7 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *da, EMC2305_ATTR_RO(fan, input, _num), \ EMC2305_ATTR_RO(fan, fault, _num), \ EMC2305_ATTR_RW(fan, div, _num), \ + EMC2305_ATTR_RO(fan, alarm, _num), \ EMC2305_ATTR_RW(fan, target, _num), \ EMC2305_ATTR_RW(pwm, enable, _num), \ EMC2305_ATTR_RW2(pwm, _num) \ From 7d13479aed62255e3a7adefdd13b632470f9d9f1 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 5 Aug 2018 06:23:59 +0000 Subject: [PATCH 115/180] [celestica]: Add dx010 gpio sysfs exported when platform modules load. Signed-off-by: Guohan Lu --- platform/broadcom/platform-modules-cel.mk | 2 +- .../debian/changelog | 6 +++ .../debian/platform-modules-dx010.init | 41 +++++++++++++++++++ 3 files changed, 48 insertions(+), 1 deletion(-) diff --git a/platform/broadcom/platform-modules-cel.mk b/platform/broadcom/platform-modules-cel.mk index 792970fc4397..758c1f99802d 100644 --- a/platform/broadcom/platform-modules-cel.mk +++ b/platform/broadcom/platform-modules-cel.mk @@ -1,6 +1,6 @@ # Celestica DX010 Platform modules -CEL_DX010_PLATFORM_MODULE_VERSION = 0.6 +CEL_DX010_PLATFORM_MODULE_VERSION = 0.7 export CEL_DX010_PLATFORM_MODULE_VERSION diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/changelog b/platform/broadcom/sonic-platform-modules-cel/debian/changelog index 20ce5072b874..3b194229773c 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/changelog +++ b/platform/broadcom/sonic-platform-modules-cel/debian/changelog @@ -1,3 +1,9 @@ +sonic-cel-platform-modules (0.7) unstable; urgency=low + + * Add dx010 plaform gpio sysfs exported when module load. + + -- Pradchaya Phucharoen Wed, 21 Jun 2018 13:29:05 +0700 + sonic-cel-platform-modules (0.6) unstable; urgency=low * Remove unused port-mode switch script. This should be done by hwsku config script. diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init index c51aa742076b..f32785a798ca 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-dx010.init @@ -11,6 +11,24 @@ # Short-Description: Setup DX010 board. ### END INIT INFO +function export_gpio { +label=$2 +gpio_num=$1 +gpio_base=`( cat /sys/class/gpio/gpiochip*/base | head -1 ) 2>/dev/null` +gpio_label=`( cat /sys/class/gpio/gpiochip*/label | head -1 ) 2>/dev/null` +if [[ "X$gpio_base" == "X" ]] || +( [[ "X$label" != "X" ]] && [[ "$label" != "$gpio_label" ]] ); then + echo "Platform driver error: No gpiochip found!" + exit 1; +fi +ionum=$((gpio_base+gpio_num)) +echo $ionum > /sys/class/gpio/export +if [ $? -ne 0 ]; then + echo "Platform driver error: Cannot export gpio$ionum!" + exit 1; +fi +} + case "$1" in start) echo -n "Setting up board... " @@ -77,6 +95,29 @@ start) modprobe dx010_cpld sleep 2 + # Export platform gpio sysfs + export_gpio 10 # Fan 1 present + export_gpio 11 # Fan 2 present + export_gpio 12 # Fan 3 present + export_gpio 13 # Fan 4 present + export_gpio 14 # Fan 5 present + + export_gpio 22 # PSU L PWOK + export_gpio 25 # PSU R PWOK + export_gpio 27 # PSU L ABS + export_gpio 28 # PSU R ABS + + export_gpio 29 # Fan 1 LED: Red + export_gpio 30 # Fan 1 LED: Yellow + export_gpio 31 # Fan 2 LED: Red + export_gpio 32 # Fan 2 LED: Yellow + export_gpio 33 # Fan 3 LED: Red + export_gpio 34 # Fan 3 LED: Yellow + export_gpio 35 # Fan 4 LED: Red + export_gpio 36 # Fan 4 LED: Yellow + export_gpio 37 # Fan 5 LED: Red + export_gpio 38 # Fan 5 LED: Yellow + # Turn off/down lpmod by defult (0 - Normal, 1 - Low Pow) echo 0x00000000 > /sys/devices/platform/dx010_cpld/qsfp_lpmode From 3021e4efd61f943e256740b3d4168263899ea299 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 5 Aug 2018 06:49:36 +0000 Subject: [PATCH 116/180] [devices]: add celstica haliburton Signed-off-by: Guohan Lu --- .../celestica/x86_64-cel_e1031-r0/fancontrol | 12 + .../x86_64-cel_e1031-r0/plugins/eeprom.py | 23 + .../x86_64-cel_e1031-r0/sensors.conf | 12 + platform/broadcom/one-image.mk | 1 + platform/broadcom/platform-modules-cel.mk | 10 +- .../sonic-platform-modules-cel/README.md | 2 +- .../debian/changelog | 6 + .../sonic-platform-modules-cel/debian/control | 5 + .../debian/platform-modules-haliburton.init | 86 ++ .../platform-modules-haliburton.install | 1 + .../sonic-platform-modules-cel/debian/rules | 2 +- .../haliburton/cfg/haliburton-modules.conf | 15 + .../haliburton/modules/Makefile | 1 + .../haliburton/modules/emc2305.c | 877 ++++++++++++++++++ .../haliburton/modules/mc24lc64t.c | 142 +++ 15 files changed, 1191 insertions(+), 4 deletions(-) create mode 100644 device/celestica/x86_64-cel_e1031-r0/fancontrol create mode 100644 device/celestica/x86_64-cel_e1031-r0/plugins/eeprom.py create mode 100644 device/celestica/x86_64-cel_e1031-r0/sensors.conf create mode 100644 platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init create mode 100644 platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.install create mode 100644 platform/broadcom/sonic-platform-modules-cel/haliburton/cfg/haliburton-modules.conf create mode 100644 platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-cel/haliburton/modules/emc2305.c create mode 100644 platform/broadcom/sonic-platform-modules-cel/haliburton/modules/mc24lc64t.c diff --git a/device/celestica/x86_64-cel_e1031-r0/fancontrol b/device/celestica/x86_64-cel_e1031-r0/fancontrol new file mode 100644 index 000000000000..a94c63055fd7 --- /dev/null +++ b/device/celestica/x86_64-cel_e1031-r0/fancontrol @@ -0,0 +1,12 @@ +# Configuration file generated by pwmconfig, changes will be lost +INTERVAL=2 +DEVPATH=hwmon3=devices/pci0000:00/0000:00:13.0/i2c-0/i2c-8/i2c-23/23-004d/ hwmon2=devices/pci0000:00/0000:00:13.0/i2c-0/i2c-8/i2c-11/11-001a/hwmon/hwmon2 +DEVNAME=hwmon3=emc2305 hwmon2=max6697 +FCTEMPS=hwmon3/pwm1=hwmon2/temp2_input hwmon3/pwm2=hwmon2/temp2_input hwmon3/pwm4=hwmon2/temp2_input +FCFANS=hwmon3/device/pwm1=hwmon3/device/fan1_input hwmon3/device/pwm2=hwmon3/device/fan2_input hwmon3/device/pwm4=hwmon3/device/fan4_input +MINTEMP=hwmon3/device/pwm1=29 hwmon3/device/pwm2=29 hwmon3/device/pwm4=29 +MAXTEMP=hwmon3/device/pwm1=44 hwmon3/device/pwm2=44 hwmon3/device/pwm4=44 +MINSTART=hwmon3/device/pwm1=102 hwmon3/device/pwm2=102 hwmon3/device/pwm4=102 +MINSTOP=hwmon3/device/pwm1=102 hwmon3/device/pwm2=102 hwmon3/device/pwm4=102 +MINPWM=hwmon3/device/pwm1=102 hwmon3/device/pwm2=102 hwmon3/device/pwm4=102 +MAXPWM=hwmon3/device/pwm1=255 hwmon3/device/pwm2=255 hwmon3/device/pwm4=255 diff --git a/device/celestica/x86_64-cel_e1031-r0/plugins/eeprom.py b/device/celestica/x86_64-cel_e1031-r0/plugins/eeprom.py new file mode 100644 index 000000000000..6577631c8908 --- /dev/null +++ b/device/celestica/x86_64-cel_e1031-r0/plugins/eeprom.py @@ -0,0 +1,23 @@ +#!/usr/bin/env python + +############################################################################# +# Celestica Haliburton +# +# Platform and model specific eeprom subclass, inherits from the base class, +# and provides the followings: +# - the eeprom format definition +# - specific encoder/decoder if there is special need +############################################################################# + +try: + from sonic_eeprom import eeprom_tlvinfo +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + + +class board(eeprom_tlvinfo.TlvInfoDecoder): + + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/sys/class/i2c-adapter/i2c-2/2-0050/eeprom" + super(board, self).__init__(self.eeprom_path, 0, '', True) + diff --git a/device/celestica/x86_64-cel_e1031-r0/sensors.conf b/device/celestica/x86_64-cel_e1031-r0/sensors.conf new file mode 100644 index 000000000000..1874548cff64 --- /dev/null +++ b/device/celestica/x86_64-cel_e1031-r0/sensors.conf @@ -0,0 +1,12 @@ +# libsensors configuration file for Celestica DX010. +# The i2c bus portion is omit because adapter name +# changes every time when system boot up. + +chip "max6697-i2c-*-1a" + label temp1 "temp sensor 1" + label temp2 "temp sensor 2" + label temp3 "temp sensor 3" + label temp4 "temp sensor 4" + label temp5 "temp sensor 5" + ignore temp6 + ignore temp7 diff --git a/platform/broadcom/one-image.mk b/platform/broadcom/one-image.mk index 26ac0506aa71..8b24216d0a9d 100755 --- a/platform/broadcom/one-image.mk +++ b/platform/broadcom/one-image.mk @@ -23,6 +23,7 @@ $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(DELL_S6000_PLATFORM_MODULE) \ $(INVENTEC_D7032Q28B_PLATFORM_MODULE) \ $(INVENTEC_D7054Q28B_PLATFORM_MODULE) \ $(CEL_DX010_PLATFORM_MODULE) \ + $(CEL_HALIBURTON_PLATFORM_MODULE) \ $(DELTA_AG9032V1_PLATFORM_MODULE) \ $(DELTA_AG9064_PLATFORM_MODULE) \ $(DELTA_AG5648_PLATFORM_MODULE) \ diff --git a/platform/broadcom/platform-modules-cel.mk b/platform/broadcom/platform-modules-cel.mk index 758c1f99802d..9226d9246308 100644 --- a/platform/broadcom/platform-modules-cel.mk +++ b/platform/broadcom/platform-modules-cel.mk @@ -1,8 +1,10 @@ -# Celestica DX010 Platform modules +# Celestica DX010 and Haliburton Platform modules -CEL_DX010_PLATFORM_MODULE_VERSION = 0.7 +CEL_DX010_PLATFORM_MODULE_VERSION = 0.8 +CEL_HALIBURTON_PLATFORM_MODULE_VERSION = 0.8 export CEL_DX010_PLATFORM_MODULE_VERSION +export CEL_HALIBURTON_PLATFORM_MODULE_VERSION CEL_DX010_PLATFORM_MODULE = platform-modules-dx010_$(CEL_DX010_PLATFORM_MODULE_VERSION)_amd64.deb $(CEL_DX010_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-cel @@ -10,4 +12,8 @@ $(CEL_DX010_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) $(CEL_DX010_PLATFORM_MODULE)_PLATFORM = x86_64-cel_seastone-r0 SONIC_DPKG_DEBS += $(CEL_DX010_PLATFORM_MODULE) +CEL_HALIBURTON_PLATFORM_MODULE = platform-modules-haliburton_$(CEL_HALIBURTON_PLATFORM_MODULE_VERSION)_amd64.deb +$(CEL_HALIBURTON_PLATFORM_MODULE)_PLATFORM = x86_64-cel_e1031-r0 +$(eval $(call add_extra_package,$(CEL_DX010_PLATFORM_MODULE),$(CEL_HALIBURTON_PLATFORM_MODULE))) + SONIC_STRETCH_DEBS += $(CEL_DX010_PLATFORM_MODULE) diff --git a/platform/broadcom/sonic-platform-modules-cel/README.md b/platform/broadcom/sonic-platform-modules-cel/README.md index b09a36b51d95..26e45c685e44 100644 --- a/platform/broadcom/sonic-platform-modules-cel/README.md +++ b/platform/broadcom/sonic-platform-modules-cel/README.md @@ -1 +1 @@ -platform drivers for Celestica DX010 for the SONiC project +platform drivers for Celestica DX010 and Haliburton for the SONiC project diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/changelog b/platform/broadcom/sonic-platform-modules-cel/debian/changelog index 3b194229773c..64f2decf2677 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/changelog +++ b/platform/broadcom/sonic-platform-modules-cel/debian/changelog @@ -1,3 +1,9 @@ +sonic-cel-platform-modules (0.8) unstable; urgency=low + + * Add haliburton platform + + -- Supakit Fuangkaew Thu, 5 Apr 2018 09:09:09 +0700 + sonic-cel-platform-modules (0.7) unstable; urgency=low * Add dx010 plaform gpio sysfs exported when module load. diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/control b/platform/broadcom/sonic-platform-modules-cel/debian/control index a63df5359271..a26bdea11395 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/control +++ b/platform/broadcom/sonic-platform-modules-cel/debian/control @@ -10,3 +10,8 @@ Architecture: amd64 Depends: linux-image-4.9.0-5-amd64 Description: kernel modules for platform devices such as fan, led, sfp + +Package: platform-modules-haliburton +Architecture: amd64 +Depends: linux-image-4.9.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init new file mode 100644 index 000000000000..08770d1d64f6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init @@ -0,0 +1,86 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: $portmap +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup Haliburton board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + modprobe i2c-dev + modprobe i2c-mux-pca954x + + found=0 + for devnum in 0 1; do + devname=`cat /sys/bus/i2c/devices/i2c-${devnum}/name` + # iSMT adapter can be at either dffd0000 or dfff0000 + if [[ $devname == 'SMBus iSMT adapter at '* ]]; then + found=1 + break + fi + done + + [ $found -eq 0 ] && echo "cannot find iSMT" && exit 1 + + i2cset -y ${devnum} 0x73 0x10 0x00 0x01 i + + # Attach PCA9548 0x73 Channel Extender for CPU Board + echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-${devnum}/new_device + sleep 1 + + # Attach PCA9541 Ox71 Master Selector + chmod 755 /sys/bus/i2c/devices/i2c-${devnum}/new_device + echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-8/new_device + sleep 1 + + # Attach PCA9548 0x72 Channel Extender for Main Board + echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-8/new_device + sleep 1 + + # Attach syseeprom + echo 24lc64t 0x50 > /sys/bus/i2c/devices/i2c-2/new_device + + echo max6697 0x1a > /sys/bus/i2c/devices/i2c-3/new_device + echo max6697 0x1a > /sys/bus/i2c/devices/i2c-11/new_device + + + # Attach fans + echo emc2305 0x4d > /sys/bus/i2c/devices/i2c-23/new_device + + # Attach PSUs + echo dps200 0x5a > /sys/bus/i2c/devices/i2c-12/new_device + echo dps200 0x5b > /sys/bus/i2c/devices/i2c-13/new_device + + # Attach 4 SFP+ Uplink + echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-14/new_device + echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-15/new_device + echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-16/new_device + echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-17/new_device + + echo "done." + ;; + +stop) + echo "done." + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/platform-modules-haliburton.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.install b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.install new file mode 100644 index 000000000000..464b77855f95 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.install @@ -0,0 +1 @@ +haliburton/cfg/haliburton-modules.conf etc/modules-load.d diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/rules b/platform/broadcom/sonic-platform-modules-cel/debian/rules index fa9bb741d5a6..5086302b70b2 100755 --- a/platform/broadcom/sonic-platform-modules-cel/debian/rules +++ b/platform/broadcom/sonic-platform-modules-cel/debian/rules @@ -5,7 +5,7 @@ export INSTALL_MOD_DIR:=extra KVERSION ?= $(shell uname -r) KERNEL_SRC := /lib/modules/$(KVERSION) MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= dx010 +MODULE_DIRS:= dx010 haliburton %: dh $@ diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/cfg/haliburton-modules.conf b/platform/broadcom/sonic-platform-modules-cel/haliburton/cfg/haliburton-modules.conf new file mode 100644 index 000000000000..66f002a5fc94 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/cfg/haliburton-modules.conf @@ -0,0 +1,15 @@ +# /etc/modules: kernel modules to load at boot time. +# +# This file contains the names of kernel modules that should be loaded +# at boot time, one per line. Lines beginning with "#" are ignored. + +i2c-i801 +i2c-isch +i2c-ismt +i2c-dev +i2c-mux +i2c-smbus + +i2c-mux-gpio +i2c-mux-pca954x + diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile new file mode 100644 index 000000000000..6d0c489154c2 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile @@ -0,0 +1 @@ +obj-m := mc24lc64t.o emc2305.o diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/emc2305.c b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/emc2305.c new file mode 100644 index 000000000000..f08033e080ce --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/emc2305.c @@ -0,0 +1,877 @@ +/* + * emc2305.c - hwmon driver for SMSC EMC2305 fan controller + * (C) Copyright 2013 + * Reinhard Pfau, Guntermann & Drunck GmbH + * + * Based on emc2103 driver by SMSC. + * + * Datasheet available at: + * http://www.smsc.com/Downloads/SMSC/Downloads_Public/Data_Sheets/2305.pdf + * + * Also supports the EMC2303 fan controller which has the same functionality + * and register layout as EMC2305, but supports only up to 3 fans instead of 5. + * + * Also supports EMC2302 (up to 2 fans) and EMC2301 (1 fan) fan controller. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * TODO / IDEAS: + * - expose more of the configuration and features + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Addresses scanned. + * Listed in the same order as they appear in the EMC2305, EMC2303 data sheets. + * + * Note: these are the I2C adresses which are possible for EMC2305 and EMC2303 + * chips. + * The EMC2302 supports only 0x2e (EMC2302-1) and 0x2f (EMC2302-2). + * The EMC2301 supports only 0x2f. + */ +static const unsigned short i2c_adresses[] = { + 0x2E, + 0x2F, + 0x2C, + 0x2D, + 0x4C, + 0x4D, + I2C_CLIENT_END +}; + +/* + * global registers + */ +enum { + REG_CONFIGURATION = 0x20, + REG_FAN_STATUS = 0x24, + REG_FAN_STALL_STATUS = 0x25, + REG_FAN_SPIN_STATUS = 0x26, + REG_DRIVE_FAIL_STATUS = 0x27, + REG_FAN_INTERRUPT_ENABLE = 0x29, + REG_PWM_POLARITY_CONFIG = 0x2a, + REG_PWM_OUTPUT_CONFIG = 0x2b, + REG_PWM_BASE_FREQ_1 = 0x2c, + REG_PWM_BASE_FREQ_2 = 0x2d, + REG_SOFTWARE_LOCK = 0xef, + REG_PRODUCT_FEATURES = 0xfc, + REG_PRODUCT_ID = 0xfd, + REG_MANUFACTURER_ID = 0xfe, + REG_REVISION = 0xff +}; + +/* + * fan specific registers + */ +enum { + REG_FAN_SETTING = 0x30, + REG_PWM_DIVIDE = 0x31, + REG_FAN_CONFIGURATION_1 = 0x32, + REG_FAN_CONFIGURATION_2 = 0x33, + REG_GAIN = 0x35, + REG_FAN_SPIN_UP_CONFIG = 0x36, + REG_FAN_MAX_STEP = 0x37, + REG_FAN_MINIMUM_DRIVE = 0x38, + REG_FAN_VALID_TACH_COUNT = 0x39, + REG_FAN_DRIVE_FAIL_BAND_LOW = 0x3a, + REG_FAN_DRIVE_FAIL_BAND_HIGH = 0x3b, + REG_TACH_TARGET_LOW = 0x3c, + REG_TACH_TARGET_HIGH = 0x3d, + REG_TACH_READ_HIGH = 0x3e, + REG_TACH_READ_LOW = 0x3f, +}; + +#define SEL_FAN(fan, reg) (reg + fan * 0x10) + +/* + * Factor by equations [2] and [3] from data sheet; valid for fans where the + * number of edges equals (poles * 2 + 1). + */ +#define FAN_RPM_FACTOR 3932160 + + +struct emc2305_fan_data { + bool enabled; + bool valid; + unsigned long last_updated; + bool rpm_control; + u8 multiplier; + u8 poles; + u16 target; + u16 tach; + u16 rpm_factor; + u8 pwm; +}; + +struct emc2305_data { + struct device *hwmon_dev; + struct mutex update_lock; + int fans; + struct emc2305_fan_data fan[5]; +}; + +static int read_u8_from_i2c(struct i2c_client *client, u8 i2c_reg, u8 *output) +{ + int status = i2c_smbus_read_byte_data(client, i2c_reg); + if (status < 0) { + dev_warn(&client->dev, "reg 0x%02x, err %d\n", + i2c_reg, status); + } else { + *output = status; + } + return status; +} + +static void read_fan_from_i2c(struct i2c_client *client, u16 *output, + u8 hi_addr, u8 lo_addr) +{ + u8 high_byte, lo_byte; + + if (read_u8_from_i2c(client, hi_addr, &high_byte) < 0) + return; + + if (read_u8_from_i2c(client, lo_addr, &lo_byte) < 0) + return; + + *output = ((u16)high_byte << 5) | (lo_byte >> 3); +} + +static void write_fan_target_to_i2c(struct i2c_client *client, int fan, + u16 new_target) +{ + const u8 lo_reg = SEL_FAN(fan, REG_TACH_TARGET_LOW); + const u8 hi_reg = SEL_FAN(fan, REG_TACH_TARGET_HIGH); + u8 high_byte = (new_target & 0x1fe0) >> 5; + u8 low_byte = (new_target & 0x001f) << 3; + i2c_smbus_write_byte_data(client, lo_reg, low_byte); + i2c_smbus_write_byte_data(client, hi_reg, high_byte); +} + +static void read_fan_config_from_i2c(struct i2c_client *client, int fan) + +{ + struct emc2305_data *data = i2c_get_clientdata(client); + u8 conf1; + + if (read_u8_from_i2c(client, SEL_FAN(fan, REG_FAN_CONFIGURATION_1), + &conf1) < 0) + return; + + data->fan[fan].rpm_control = (conf1 & 0x80) != 0; + data->fan[fan].multiplier = 1 << ((conf1 & 0x60) >> 5); + data->fan[fan].poles = ((conf1 & 0x18) >> 3) + 1; +} + +static void read_fan_setting(struct i2c_client *client, int fan) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + u8 setting; + + if (read_u8_from_i2c(client, SEL_FAN(fan, REG_FAN_SETTING), + &setting) < 0) + return; + + data->fan[fan].pwm = setting; +} + +static void read_fan_data(struct i2c_client *client, int fan_idx) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + + read_fan_from_i2c(client, &data->fan[fan_idx].target, + SEL_FAN(fan_idx, REG_TACH_TARGET_HIGH), + SEL_FAN(fan_idx, REG_TACH_TARGET_LOW)); + read_fan_from_i2c(client, &data->fan[fan_idx].tach, + SEL_FAN(fan_idx, REG_TACH_READ_HIGH), + SEL_FAN(fan_idx, REG_TACH_READ_LOW)); +} + +static struct emc2305_fan_data * +emc2305_update_fan(struct i2c_client *client, int fan_idx) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan_data = &data->fan[fan_idx]; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, fan_data->last_updated + HZ + HZ / 2) + || !fan_data->valid) { + read_fan_config_from_i2c(client, fan_idx); + read_fan_data(client, fan_idx); + read_fan_setting(client, fan_idx); + fan_data->valid = true; + fan_data->last_updated = jiffies; + } + + mutex_unlock(&data->update_lock); + return fan_data; +} + +static struct emc2305_fan_data * +emc2305_update_device_fan(struct device *dev, struct device_attribute *da) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + + return emc2305_update_fan(client, fan_idx); +} + +/* + * set/ config functions + */ + +/* + * Note: we also update the fan target here, because its value is + * determined in part by the fan clock divider. This follows the principle + * of least surprise; the user doesn't expect the fan target to change just + * because the divider changed. + */ +static int +emc2305_set_fan_div(struct i2c_client *client, int fan_idx, long new_div) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan = emc2305_update_fan(client, fan_idx); + const u8 reg_conf1 = SEL_FAN(fan_idx, REG_FAN_CONFIGURATION_1); + int new_range_bits, old_div = 8 / fan->multiplier; + int status = 0; + + if (new_div == old_div) /* No change */ + return 0; + + switch (new_div) { + case 1: + new_range_bits = 3; + break; + case 2: + new_range_bits = 2; + break; + case 4: + new_range_bits = 1; + break; + case 8: + new_range_bits = 0; + break; + default: + return -EINVAL; + } + + mutex_lock(&data->update_lock); + + status = i2c_smbus_read_byte_data(client, reg_conf1); + if (status < 0) { + dev_dbg(&client->dev, "reg 0x%02x, err %d\n", + reg_conf1, status); + status = -EIO; + goto exit_unlock; + } + status &= 0x9F; + status |= (new_range_bits << 5); + status = i2c_smbus_write_byte_data(client, reg_conf1, status); + if (status < 0) { + status = -EIO; + goto exit_invalidate; + } + + fan->multiplier = 8 / new_div; + + /* update fan target if high byte is not disabled */ + if ((fan->target & 0x1fe0) != 0x1fe0) { + u16 new_target = (fan->target * old_div) / new_div; + fan->target = min_t(u16, new_target, 0x1fff); + write_fan_target_to_i2c(client, fan_idx, fan->target); + } + +exit_invalidate: + /* invalidate fan data to force re-read from hardware */ + fan->valid = false; +exit_unlock: + mutex_unlock(&data->update_lock); + return status; +} + +static int +emc2305_set_fan_target(struct i2c_client *client, int fan_idx, long rpm_target) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan = emc2305_update_fan(client, fan_idx); + + /* + * Datasheet states 16000 as maximum RPM target + * (table 2.2 and section 4.3) + */ + if ((rpm_target < 0) || (rpm_target > 16000)) + return -EINVAL; + + mutex_lock(&data->update_lock); + + if (rpm_target == 0) + fan->target = 0x1fff; + else + fan->target = clamp_val( + (FAN_RPM_FACTOR * fan->multiplier) / rpm_target, + 0, 0x1fff); + + write_fan_target_to_i2c(client, fan_idx, fan->target); + + mutex_unlock(&data->update_lock); + return 0; +} + +static int +emc2305_set_pwm_enable(struct i2c_client *client, int fan_idx, long enable) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan = emc2305_update_fan(client, fan_idx); + const u8 reg_fan_conf1 = SEL_FAN(fan_idx, REG_FAN_CONFIGURATION_1); + int status = 0; + u8 conf_reg; + + mutex_lock(&data->update_lock); + switch (enable) { + case 0: + fan->rpm_control = false; + break; + case 3: + fan->rpm_control = true; + break; + default: + status = -EINVAL; + goto exit_unlock; + } + + status = read_u8_from_i2c(client, reg_fan_conf1, &conf_reg); + if (status < 0) { + status = -EIO; + goto exit_unlock; + } + + if (fan->rpm_control) + conf_reg |= 0x80; + else + conf_reg &= ~0x80; + + status = i2c_smbus_write_byte_data(client, reg_fan_conf1, conf_reg); + if (status < 0) + status = -EIO; + +exit_unlock: + mutex_unlock(&data->update_lock); + return status; +} + +static int +emc2305_set_pwm(struct i2c_client *client, int fan_idx, long pwm) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct emc2305_fan_data *fan = emc2305_update_fan(client, fan_idx); + const u8 reg_fan_setting = SEL_FAN(fan_idx, REG_FAN_SETTING); + int status = 0; + + /* + * Datasheet states 255 as maximum PWM + * (section 5.7) + */ + if ((pwm < 0) || (pwm > 255)) + return -EINVAL; + + fan->pwm = pwm; + + mutex_lock(&data->update_lock); + + status = i2c_smbus_write_byte_data(client, reg_fan_setting, fan->pwm); + + mutex_unlock(&data->update_lock); + return status; +} +/* + * sysfs callback functions + * + * Note: + * Naming of the funcs is modelled after the naming scheme described in + * Documentation/hwmon/sysfs-interface: + * + * For a sysfs file _ the functions are named like this: + * the show function: show__ + * the store function: set__ + * For read only (RO) attributes of course only the show func is required. + * + * This convention allows us to define the sysfs attributes by using macros. + */ + +static ssize_t +show_fan_input(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + int rpm = 0; + if (fan->tach != 0) + rpm = (FAN_RPM_FACTOR * fan->multiplier) / fan->tach; + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t +show_fan_fault(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + bool fault = ((fan->tach & 0x1fe0) == 0x1fe0); + return sprintf(buf, "%d\n", fault ? 1 : 0); +} + +static ssize_t +show_fan_div(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + int fan_div = 8 / fan->multiplier; + return sprintf(buf, "%d\n", fan_div); +} + +static ssize_t +set_fan_div(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + long new_div; + int status; + + status = kstrtol(buf, 10, &new_div); + if (status < 0) + return -EINVAL; + + status = emc2305_set_fan_div(client, fan_idx, new_div); + if (status < 0) + return status; + + return count; +} + +static ssize_t +show_fan_target(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + int rpm = 0; + + /* high byte of 0xff indicates disabled so return 0 */ + if ((fan->target != 0) && ((fan->target & 0x1fe0) != 0x1fe0)) + rpm = (FAN_RPM_FACTOR * fan->multiplier) + / fan->target; + + return sprintf(buf, "%d\n", rpm); +} + +static ssize_t set_fan_target(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + long rpm_target; + int status; + + status = kstrtol(buf, 10, &rpm_target); + if (status < 0) + return -EINVAL; + + status = emc2305_set_fan_target(client, fan_idx, rpm_target); + if (status < 0) + return status; + + return count; +} + +static ssize_t +show_pwm_enable(struct device *dev, struct device_attribute *da, char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + return sprintf(buf, "%d\n", fan->rpm_control ? 3 : 0); +} + +static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + long new_value; + int status; + + status = kstrtol(buf, 10, &new_value); + if (status < 0) + return -EINVAL; + status = emc2305_set_pwm_enable(client, fan_idx, new_value); + return count; +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct emc2305_fan_data *fan = emc2305_update_device_fan(dev, da); + return sprintf(buf, "%d\n", fan->pwm); +} + +static ssize_t set_pwm(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + int fan_idx = to_sensor_dev_attr(da)->index; + unsigned long val; + int ret; + int status; + + ret = kstrtoul(buf, 10, &val); + if (ret) + return ret; + if (val > 255) + return -EINVAL; + + status = emc2305_set_pwm(client, fan_idx, val); + return count; +} + +/* define a read only attribute */ +#define EMC2305_ATTR_RO(_type, _item, _num) \ + SENSOR_ATTR(_type ## _num ## _ ## _item, S_IRUGO, \ + show_## _type ## _ ## _item, NULL, _num - 1) + +/* define a read/write attribute */ +#define EMC2305_ATTR_RW(_type, _item, _num) \ + SENSOR_ATTR(_type ## _num ## _ ## _item, S_IRUGO | S_IWUSR, \ + show_## _type ##_ ## _item, \ + set_## _type ## _ ## _item, _num - 1) + +/* + * TODO: Ugly hack, but temporary as this whole logic needs + * to be rewritten as per standard HWMON sysfs registration + */ + +/* define a read/write attribute */ +#define EMC2305_ATTR_RW2(_type, _num) \ + SENSOR_ATTR(_type ## _num, S_IRUGO | S_IWUSR, \ + show_## _type, set_## _type, _num - 1) + +/* defines the attributes for a single fan */ +#define EMC2305_DEFINE_FAN_ATTRS(_num) \ + static const \ + struct sensor_device_attribute emc2305_attr_fan ## _num[] = { \ + EMC2305_ATTR_RO(fan, input, _num), \ + EMC2305_ATTR_RO(fan, fault, _num), \ + EMC2305_ATTR_RW(fan, div, _num), \ + EMC2305_ATTR_RW(fan, target, _num), \ + EMC2305_ATTR_RW(pwm, enable, _num), \ + EMC2305_ATTR_RW2(pwm, _num) \ + } + +#define EMC2305_NUM_FAN_ATTRS ARRAY_SIZE(emc2305_attr_fan1) + +/* common attributes for EMC2303 and EMC2305 */ +static const struct sensor_device_attribute emc2305_attr_common[] = { +}; + +/* fan attributes for the single fans */ +EMC2305_DEFINE_FAN_ATTRS(1); +EMC2305_DEFINE_FAN_ATTRS(2); +EMC2305_DEFINE_FAN_ATTRS(3); +EMC2305_DEFINE_FAN_ATTRS(4); +EMC2305_DEFINE_FAN_ATTRS(5); +EMC2305_DEFINE_FAN_ATTRS(6); + +/* fan attributes */ +static const struct sensor_device_attribute *emc2305_fan_attrs[] = { + emc2305_attr_fan1, + emc2305_attr_fan2, + emc2305_attr_fan3, + emc2305_attr_fan4, + emc2305_attr_fan5, +}; + +/* + * driver interface + */ + +static int emc2305_remove(struct i2c_client *client) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + int fan_idx, i; + + hwmon_device_unregister(data->hwmon_dev); + + for (fan_idx = 0; fan_idx < data->fans; ++fan_idx) + for (i = 0; i < EMC2305_NUM_FAN_ATTRS; ++i) + device_remove_file( + &client->dev, + &emc2305_fan_attrs[fan_idx][i].dev_attr); + + for (i = 0; i < ARRAY_SIZE(emc2305_attr_common); ++i) + device_remove_file(&client->dev, + &emc2305_attr_common[i].dev_attr); + + kfree(data); + return 0; +} + + +#ifdef CONFIG_OF +/* + * device tree support + */ + +struct of_fan_attribute { + const char *name; + int (*set)(struct i2c_client*, int, long); +}; + +struct of_fan_attribute of_fan_attributes[] = { + {"fan-div", emc2305_set_fan_div}, + {"fan-target", emc2305_set_fan_target}, + {"pwm-enable", emc2305_set_pwm_enable}, + {NULL, NULL} +}; + +static int emc2305_config_of(struct i2c_client *client) +{ + struct emc2305_data *data = i2c_get_clientdata(client); + struct device_node *node; + unsigned int fan_idx; + + if (!client->dev.of_node) + return -EINVAL; + if (!of_get_next_child(client->dev.of_node, NULL)) + return 0; + + for (fan_idx = 0; fan_idx < data->fans; ++fan_idx) + data->fan[fan_idx].enabled = false; + + for_each_child_of_node(client->dev.of_node, node) { + const __be32 *property; + int len; + struct of_fan_attribute *attr; + + property = of_get_property(node, "reg", &len); + if (!property || len != sizeof(int)) { + dev_err(&client->dev, "invalid reg on %s\n", + node->full_name); + continue; + } + + fan_idx = be32_to_cpup(property); + if (fan_idx >= data->fans) { + dev_err(&client->dev, + "invalid fan index %d on %s\n", + fan_idx, node->full_name); + continue; + } + + data->fan[fan_idx].enabled = true; + + for (attr = of_fan_attributes; attr->name; ++attr) { + int status = 0; + long value; + property = of_get_property(node, attr->name, &len); + if (!property) + continue; + if (len != sizeof(int)) { + dev_err(&client->dev, "invalid %s on %s\n", + attr->name, node->full_name); + continue; + } + value = be32_to_cpup(property); + status = attr->set(client, fan_idx, value); + if (status == -EINVAL) { + dev_err(&client->dev, + "invalid value for %s on %s\n", + attr->name, node->full_name); + } + } + } + + return 0; +} + +#endif + +static void emc2305_get_config(struct i2c_client *client) +{ + int i; + struct emc2305_data *data = i2c_get_clientdata(client); + + for (i = 0; i < data->fans; ++i) { + data->fan[i].enabled = true; + emc2305_update_fan(client, i); + } + +#ifdef CONFIG_OF + emc2305_config_of(client); +#endif + +} + +static int +emc2305_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct emc2305_data *data; + int status; + int i; + int fan_idx; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -EIO; + + data = kzalloc(sizeof(struct emc2305_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + status = i2c_smbus_read_byte_data(client, REG_PRODUCT_ID); + switch (status) { + case 0x34: /* EMC2305 */ + data->fans = 5; + break; + case 0x35: /* EMC2303 */ + data->fans = 3; + break; + case 0x36: /* EMC2302 */ + data->fans = 2; + break; + case 0x37: /* EMC2301 */ + data->fans = 1; + break; + default: + if (status >= 0) + status = -EINVAL; + goto exit_free; + } + + emc2305_get_config(client); + + for (i = 0; i < ARRAY_SIZE(emc2305_attr_common); ++i) { + status = device_create_file(&client->dev, + &emc2305_attr_common[i].dev_attr); + if (status) + goto exit_remove; + } + for (fan_idx = 0; fan_idx < data->fans; ++fan_idx) + for (i = 0; i < EMC2305_NUM_FAN_ATTRS; ++i) { + if (!data->fan[fan_idx].enabled) + continue; + status = device_create_file( + &client->dev, + &emc2305_fan_attrs[fan_idx][i].dev_attr); + if (status) + goto exit_remove_fans; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove_fans; + } + + dev_info(&client->dev, "%s: sensor '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove_fans: + for (fan_idx = 0; fan_idx < data->fans; ++fan_idx) + for (i = 0; i < EMC2305_NUM_FAN_ATTRS; ++i) + device_remove_file( + &client->dev, + &emc2305_fan_attrs[fan_idx][i].dev_attr); + +exit_remove: + for (i = 0; i < ARRAY_SIZE(emc2305_attr_common); ++i) + device_remove_file(&client->dev, + &emc2305_attr_common[i].dev_attr); +exit_free: + kfree(data); + return status; +} + +static const struct i2c_device_id emc2305_id[] = { + { "emc2305", 0 }, + { "emc2303", 0 }, + { "emc2302", 0 }, + { "emc2301", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, emc2305_id); + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int +emc2305_detect(struct i2c_client *new_client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = new_client->adapter; + int manufacturer, product; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) + return -ENODEV; + + manufacturer = + i2c_smbus_read_byte_data(new_client, REG_MANUFACTURER_ID); + if (manufacturer != 0x5D) + return -ENODEV; + + product = i2c_smbus_read_byte_data(new_client, REG_PRODUCT_ID); + + switch (product) { + case 0x34: + strlcpy(info->type, "emc2305", I2C_NAME_SIZE); + break; + case 0x35: + strlcpy(info->type, "emc2303", I2C_NAME_SIZE); + break; + case 0x36: + strlcpy(info->type, "emc2302", I2C_NAME_SIZE); + break; + case 0x37: + strlcpy(info->type, "emc2301", I2C_NAME_SIZE); + break; + default: + return -ENODEV; + } + + return 0; +} + +static struct i2c_driver emc2305_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "emc2305", + }, + .probe = emc2305_probe, + .remove = emc2305_remove, + .id_table = emc2305_id, +/* + .detect = emc2305_detect, + .address_list = i2c_adresses, +*/ +}; + +module_i2c_driver(emc2305_driver); + +MODULE_AUTHOR("Reinhard Pfau "); +MODULE_DESCRIPTION("SMSC EMC2305 hwmon driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/mc24lc64t.c b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/mc24lc64t.c new file mode 100644 index 000000000000..a391056d09a7 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/mc24lc64t.c @@ -0,0 +1,142 @@ +/* + * mc24lc64t.c - driver for Microchip 24LC64T + * + * Copyright (C) 2017 Celestica Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +struct mc24lc64t_data { + struct i2c_client *fake_client; + struct mutex update_lock; +}; + +static ssize_t mc24lc64t_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = kobj_to_i2c_client(kobj); + struct mc24lc64t_data *drvdata = i2c_get_clientdata(client); + unsigned long timeout, read_time, i = 0; + int status; + + mutex_lock(&drvdata->update_lock); + + if (i2c_smbus_write_byte_data(client, off>>8, off)) + { + status = -EIO; + goto exit; + } + + msleep(1); + +begin: + + if (i < count) + { + timeout = jiffies + msecs_to_jiffies(25); /* 25 mS timeout*/ + do { + read_time = jiffies; + + status = i2c_smbus_read_byte(client); + if (status >= 0) + { + buf[i++] = status; + goto begin; + } + } while (time_before(read_time, timeout)); + + status = -ETIMEDOUT; + goto exit; + } + + status = count; + +exit: + mutex_unlock(&drvdata->update_lock); + + return status; +} + +static struct bin_attribute mc24lc64t_bit_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = 65536, + .read = mc24lc64t_read, +}; + +static int mc24lc64t_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = client->adapter; + struct mc24lc64t_data *drvdata; + int err; + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA + | I2C_FUNC_SMBUS_READ_BYTE)) + return -EPFNOSUPPORT; + + if (!(drvdata = devm_kzalloc(&client->dev, + sizeof(struct mc24lc64t_data), GFP_KERNEL))) + return -ENOMEM; + + drvdata->fake_client = i2c_new_dummy(client->adapter, client->addr + 1); + if (!drvdata->fake_client) + return -ENOMEM; + + i2c_set_clientdata(client, drvdata); + mutex_init(&drvdata->update_lock); + + err = sysfs_create_bin_file(&client->dev.kobj, &mc24lc64t_bit_attr); + if (err) + i2c_unregister_device(drvdata->fake_client); + + return err; +} + +static int mc24lc64t_remove(struct i2c_client *client) +{ + struct mc24lc64t_data *drvdata = i2c_get_clientdata(client); + + i2c_unregister_device(drvdata->fake_client); + + sysfs_remove_bin_file(&client->dev.kobj, &mc24lc64t_bit_attr); + + return 0; +} + +static const struct i2c_device_id mc24lc64t_id[] = { + { "24lc64t", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mc24lc64t_id); + +static struct i2c_driver mc24lc64t_driver = { + .driver = { + .name = "mc24lc64t", + .owner = THIS_MODULE, + }, + .probe = mc24lc64t_probe, + .remove = mc24lc64t_remove, + .id_table = mc24lc64t_id, +}; + +module_i2c_driver(mc24lc64t_driver); + +MODULE_AUTHOR("Abhisit Sangjan "); +MODULE_DESCRIPTION("Microchip 24LC64T Driver"); +MODULE_LICENSE("GPL"); From aa2e340f5ab9b8d07ccfc503bd9a69281387cf8e Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Tue, 7 Aug 2018 07:14:37 +0000 Subject: [PATCH 117/180] [broadcom]: build broadcom kernel modules from gpl source codes Signed-off-by: Guohan Lu --- platform/broadcom/rules.mk | 2 +- platform/broadcom/sai-modules.mk | 11 + platform/broadcom/saibcm-modules/.gitignore | 4 + .../broadcom/saibcm-modules/debian/changelog | 48 + .../broadcom/saibcm-modules/debian/compat | 1 + .../broadcom/saibcm-modules/debian/control | 14 + .../debian/opennsl-modules-4.9.0-5-amd64.dirs | 1 + .../debian/opennsl-modules-4.9.0-5-amd64.init | 47 + .../opennsl-modules-4.9.0-5-amd64.install | 4 + platform/broadcom/saibcm-modules/debian/rules | 183 + .../broadcom/saibcm-modules/include/ibde.h | 158 + .../broadcom/saibcm-modules/include/kcom.h | 541 ++ .../saibcm-modules/include/sal/core/sync.h | 39 + .../saibcm-modules/include/sal/core/thread.h | 31 + .../saibcm-modules/include/sal/types.h | 156 + .../saibcm-modules/include/sdk_config.h | 46 + .../saibcm-modules/include/soc/cmic.h | 38 + .../saibcm-modules/include/soc/devids.h | 1948 +++++ .../broadcom/saibcm-modules/make/Make.config | 364 + .../broadcom/saibcm-modules/make/Make.depend | 109 + .../broadcom/saibcm-modules/make/Make.kernlib | 70 + .../broadcom/saibcm-modules/make/Make.lib | 81 + .../broadcom/saibcm-modules/make/Make.linux | 98 + .../broadcom/saibcm-modules/make/Make.local | 2 + .../broadcom/saibcm-modules/make/Make.subdirs | 45 + .../broadcom/saibcm-modules/make/Make.tools | 39 + .../saibcm-modules/make/Makefile.linux-gto | 115 + .../make/Makefile.linux-gto-2_6 | 271 + .../saibcm-modules/make/Makefile.linux-iproc | 93 + .../make/Makefile.linux-iproc-3_14 | 104 + .../saibcm-modules/make/Makefile.linux-kernel | 113 + .../make/Makefile.linux-kernel-2_6 | 149 + .../make/Makefile.linux-kernel-3_6 | 149 + .../make/Makefile.linux-kernel-4_4 | 158 + .../make/Makefile.linux-kmodule | 82 + .../make/Makefile.linux-x86-common-2_6 | 45 + .../Makefile.linux-x86-generic-common-2_6 | 52 + .../Makefile.linux-x86-smp_generic_64-2_6 | 45 + .../opennsl-modules-4.9.0-5-amd64.service | 13 + .../systems/bde/linux/include/linux-bde.h | 275 + .../systems/bde/linux/include/linux_dma.h | 76 + .../systems/bde/linux/include/mpool.h | 37 + .../systems/bde/linux/kernel/Makefile | 115 + .../bde/linux/kernel/linux-kernel-bde.c | 5173 +++++++++++++ .../systems/bde/linux/kernel/linux_dma.c | 906 +++ .../systems/bde/linux/kernel/linux_shbde.c | 121 + .../systems/bde/linux/kernel/linux_shbde.h | 34 + .../systems/bde/linux/shared/mpool.c | 295 + .../systems/bde/linux/user/kernel/Makefile | 71 + .../bde/linux/user/kernel/linux-user-bde.c | 1264 +++ .../bde/linux/user/kernel/linux-user-bde.h | 113 + .../systems/bde/shared/include/shbde.h | 77 + .../systems/bde/shared/include/shbde_iproc.h | 49 + .../systems/bde/shared/include/shbde_mdio.h | 60 + .../systems/bde/shared/include/shbde_pci.h | 47 + .../systems/bde/shared/shbde_iproc.c | 466 ++ .../systems/bde/shared/shbde_mdio.c | 187 + .../systems/bde/shared/shbde_pci.c | 393 + .../systems/linux/kernel/modules/Makefile | 32 + .../linux/kernel/modules/bcm-knet/Makefile | 68 + .../linux/kernel/modules/bcm-knet/bcm-knet.c | 6874 +++++++++++++++++ .../linux/kernel/modules/include/bcm-knet.h | 79 + .../linux/kernel/modules/include/gmodule.h | 66 + .../linux/kernel/modules/include/lkm.h | 180 + .../linux/kernel/modules/knet-cb/Makefile | 65 + .../linux/kernel/modules/knet-cb/knet-cb.c | 276 + .../linux/kernel/modules/shared/Makefile | 30 + .../linux/kernel/modules/shared/gmodule.c | 428 + .../linux/kernel/modules/shared/ksal.c | 250 + .../systems/linux/user/common/Makefile | 242 + .../systems/linux/user/gto-2_6/Makefile | 85 + .../systems/linux/user/gto/Makefile | 61 + .../systems/linux/user/iproc-3_14/Makefile | 66 + .../systems/linux/user/iproc/Makefile | 60 + .../user/x86-smp_generic_64-2_6/Makefile | 46 + .../broadcom/saibcm-modules/tools/mktool.pl | 293 + platform/broadcom/sdk.mk | 4 - 77 files changed, 24428 insertions(+), 5 deletions(-) create mode 100644 platform/broadcom/sai-modules.mk create mode 100644 platform/broadcom/saibcm-modules/.gitignore create mode 100644 platform/broadcom/saibcm-modules/debian/changelog create mode 100644 platform/broadcom/saibcm-modules/debian/compat create mode 100644 platform/broadcom/saibcm-modules/debian/control create mode 100644 platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.dirs create mode 100755 platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.init create mode 100644 platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.install create mode 100755 platform/broadcom/saibcm-modules/debian/rules create mode 100644 platform/broadcom/saibcm-modules/include/ibde.h create mode 100644 platform/broadcom/saibcm-modules/include/kcom.h create mode 100644 platform/broadcom/saibcm-modules/include/sal/core/sync.h create mode 100644 platform/broadcom/saibcm-modules/include/sal/core/thread.h create mode 100644 platform/broadcom/saibcm-modules/include/sal/types.h create mode 100644 platform/broadcom/saibcm-modules/include/sdk_config.h create mode 100644 platform/broadcom/saibcm-modules/include/soc/cmic.h create mode 100644 platform/broadcom/saibcm-modules/include/soc/devids.h create mode 100644 platform/broadcom/saibcm-modules/make/Make.config create mode 100644 platform/broadcom/saibcm-modules/make/Make.depend create mode 100644 platform/broadcom/saibcm-modules/make/Make.kernlib create mode 100644 platform/broadcom/saibcm-modules/make/Make.lib create mode 100644 platform/broadcom/saibcm-modules/make/Make.linux create mode 100644 platform/broadcom/saibcm-modules/make/Make.local create mode 100644 platform/broadcom/saibcm-modules/make/Make.subdirs create mode 100644 platform/broadcom/saibcm-modules/make/Make.tools create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-gto create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-gto-2_6 create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-iproc create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-iproc-3_14 create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-kernel create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-2_6 create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-3_6 create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-4_4 create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-kmodule create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-x86-common-2_6 create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-x86-generic-common-2_6 create mode 100644 platform/broadcom/saibcm-modules/make/Makefile.linux-x86-smp_generic_64-2_6 create mode 100644 platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-5-amd64.service create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/include/linux-bde.h create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/include/linux_dma.h create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/include/mpool.h create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/kernel/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux-kernel-bde.c create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_dma.c create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_shbde.c create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_shbde.h create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/shared/mpool.c create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/linux-user-bde.c create mode 100644 platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/linux-user-bde.h create mode 100644 platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde.h create mode 100644 platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_iproc.h create mode 100644 platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_mdio.h create mode 100644 platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_pci.h create mode 100644 platform/broadcom/saibcm-modules/systems/bde/shared/shbde_iproc.c create mode 100644 platform/broadcom/saibcm-modules/systems/bde/shared/shbde_mdio.c create mode 100644 platform/broadcom/saibcm-modules/systems/bde/shared/shbde_pci.c create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/bcm-knet/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/bcm-knet/bcm-knet.c create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/bcm-knet.h create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/gmodule.h create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/lkm.h create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/knet-cb/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/knet-cb/knet-cb.c create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/gmodule.c create mode 100644 platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/ksal.c create mode 100644 platform/broadcom/saibcm-modules/systems/linux/user/common/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/linux/user/gto-2_6/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/linux/user/gto/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/linux/user/iproc-3_14/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/linux/user/iproc/Makefile create mode 100644 platform/broadcom/saibcm-modules/systems/linux/user/x86-smp_generic_64-2_6/Makefile create mode 100644 platform/broadcom/saibcm-modules/tools/mktool.pl delete mode 100644 platform/broadcom/sdk.mk diff --git a/platform/broadcom/rules.mk b/platform/broadcom/rules.mk index 582af46b86a9..c7fa0f7aa80e 100755 --- a/platform/broadcom/rules.mk +++ b/platform/broadcom/rules.mk @@ -1,4 +1,4 @@ -include $(PLATFORM_PATH)/sdk.mk +include $(PLATFORM_PATH)/sai-modules.mk include $(PLATFORM_PATH)/sai.mk include $(PLATFORM_PATH)/platform-modules-s6000.mk include $(PLATFORM_PATH)/platform-modules-dell.mk diff --git a/platform/broadcom/sai-modules.mk b/platform/broadcom/sai-modules.mk new file mode 100644 index 000000000000..31cd5996ef1c --- /dev/null +++ b/platform/broadcom/sai-modules.mk @@ -0,0 +1,11 @@ +# Broadcom SAI modules + +KVERSION = 4.9.0-5-amd64 +BRCM_OPENNSL_KERNEL_VERSION = 3.4.1.11-1 + +BRCM_OPENNSL_KERNEL = opennsl-modules-$(KVERSION)_$(BRCM_OPENNSL_KERNEL_VERSION)_amd64.deb +$(BRCM_OPENNSL_KERNEL)_SRC_PATH = $(PLATFORM_PATH)/saibcm-modules +$(BRCM_OPENNSL_KERNEL)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) +SONIC_DPKG_DEBS += $(BRCM_OPENNSL_KERNEL) + +SONIC_STRETCH_DEBS += $(BRCM_OPENNSL_KERNEL) diff --git a/platform/broadcom/saibcm-modules/.gitignore b/platform/broadcom/saibcm-modules/.gitignore new file mode 100644 index 000000000000..338005f50ce9 --- /dev/null +++ b/platform/broadcom/saibcm-modules/.gitignore @@ -0,0 +1,4 @@ +*.debhelper.log +*.debhelper +*.substvars +*.ko diff --git a/platform/broadcom/saibcm-modules/debian/changelog b/platform/broadcom/saibcm-modules/debian/changelog new file mode 100644 index 000000000000..5ea7b289ee65 --- /dev/null +++ b/platform/broadcom/saibcm-modules/debian/changelog @@ -0,0 +1,48 @@ +opennsl (3.4.1.11-1) unstable; urgency=medium + + * Port Broadcom SAI 3.4.1.11 + * Cherry-pick change from master branch, 3.4.1.11-1 + + -- Ying Xie Fri, 05 Jan 2018 23:21:47 +0000 + +opennsl (3.4.1.10-1) unstable; urgency=medium + + * Upgrade to 3.4.1.10-1 + + -- Ying Xie Tue, 19 Dec 2017 21:33:48 +0000 + +opennsl (3.4.1.9-1) unstable; urgency=medium + + * Upgrade to 3.4.1.9-1 + + -- Ying Xie Thu, 14 Dec 2017 22:04:11 +0000 + +opennsl (3.4.1.7-2) unstable; urgency=medium + + * Add Arista 7260cx3 Rev2 hardware support + + -- Ying Xie Mon, 27 Nov 2017 18:13:50 +0000 + +opennsl (3.4.1.7-1) unstable; urgency=medium + + * Importing opennsl 3.4.1.7 + + -- Ying Xie Mon, 23 Oct 2017 23:47:25 +0000 + +opennsl (3.4.1.5-2) unstable; urgency=medium + + * Importing TD2 changes from opennsl 3.2.2.2 + + -- Ying Xie Tue, 26 Sep 2017 01:28:44 +0000 + +opennsl (3.4.1.5-1) unstable; urgency=medium + + * Importing opennsl 3.4.1.5 + + -- Ying Xie Wed, 20 Sep 2017 16:42:12 +0000 + +opennsl (3.4.1.3-1) unstable; urgency=low + + * Initial release + + -- Guohan Lu Fri, 17 Jul 2015 04:46:01 -0700 diff --git a/platform/broadcom/saibcm-modules/debian/compat b/platform/broadcom/saibcm-modules/debian/compat new file mode 100644 index 000000000000..45a4fb75db86 --- /dev/null +++ b/platform/broadcom/saibcm-modules/debian/compat @@ -0,0 +1 @@ +8 diff --git a/platform/broadcom/saibcm-modules/debian/control b/platform/broadcom/saibcm-modules/debian/control new file mode 100644 index 000000000000..e84d6de9fd52 --- /dev/null +++ b/platform/broadcom/saibcm-modules/debian/control @@ -0,0 +1,14 @@ +Source: opennsl +Section: main +Priority: extra +Maintainer: Guohan Lu +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 +#Vcs-Git: git://git.debian.org/collab-maint/bcmsdk.git +#Vcs-Browser: http://git.debian.org/?p=collab-maint/bcmsdk.git;a=summary + +Package: opennsl-modules-4.9.0-5-amd64 +Architecture: amd64 +Section: main +Depends: linux-image-4.9.0-5-amd64 +Description: kernel modules for broadcom SAI diff --git a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.dirs b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.dirs new file mode 100644 index 000000000000..30ebf9851ecb --- /dev/null +++ b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.dirs @@ -0,0 +1 @@ +lib/modules/4.9.0-5-amd64/extra diff --git a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.init b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.init new file mode 100755 index 000000000000..07a6f834757b --- /dev/null +++ b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.init @@ -0,0 +1,47 @@ +#!/bin/bash +# This script load/unload opennsl kernel modules + +### BEGIN INIT INFO +# Provides: load-opennsl-modules +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Load OpenNSL kernel modules +### END INIT INFO + +case "$1" in +start) + echo -n "Load OpenNSL kernel modules... " + + modprobe linux-kernel-bde dmasize=32M maxpayload=128 + modprobe linux-user-bde + modprobe linux-bcm-knet use_rx_skb=1 rx_buffer_size=9238 + + echo "done." + ;; + +stop) + echo -n "Unload OpenNSL kernel modules... " + + rmmod linux-bcm-knet + rmmod linux-user-bde + rmmod linux-kernel-bde + + echo "done." + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/opennsl-modules-4.9.0-5-amd64.init {start|stop}" + exit 1 + ;; +esac + +exit 0 + diff --git a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.install b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.install new file mode 100644 index 000000000000..d79178a4a549 --- /dev/null +++ b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.install @@ -0,0 +1,4 @@ +systems/linux/user/x86-smp_generic_64-2_6/linux-bcm-knet.ko lib/modules/4.9.0-5-amd64/extra +systems/linux/user/x86-smp_generic_64-2_6/linux-kernel-bde.ko lib/modules/4.9.0-5-amd64/extra +systems/linux/user/x86-smp_generic_64-2_6/linux-user-bde.ko lib/modules/4.9.0-5-amd64/extra +systemd/opennsl-modules-4.9.0-5-amd64.service lib/systemd/system diff --git a/platform/broadcom/saibcm-modules/debian/rules b/platform/broadcom/saibcm-modules/debian/rules new file mode 100755 index 000000000000..231c52aa8ccd --- /dev/null +++ b/platform/broadcom/saibcm-modules/debian/rules @@ -0,0 +1,183 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. +# +# This version is for a hypothetical package that can build a kernel modules +# architecture-dependant package via make-kpkg, as well as an +# architecture-independent module source package, and other packages +# either dep/indep for things like common files or userspace components +# needed for the kernel modules. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + + + + +# some default definitions, important! +# +# Name of the source package +psource:=opennsl-source + +# The short upstream name, used for the module source directory +sname:=opennsl + +### KERNEL SETUP +### Setup the stuff needed for making kernel module packages +### taken from /usr/share/kernel-package/sample.module.rules + +# prefix of the target package name +PACKAGE=opennsl-modules +# modifieable for experiments or debugging m-a +MA_DIR ?= /usr/share/modass +# load generic variable handling +-include $(MA_DIR)/include/generic.make +# load default rules, including kdist, kdist_image, ... +-include $(MA_DIR)/include/common-rules.make + + + +# module assistant calculates all needed things for us and sets +# following variables: +# KSRC (kernel source directory), KVERS (kernel version string), KDREV +# (revision of the Debian kernel-image package), CC (the correct +# compiler), VERSION (the final package version string), PKGNAME (full +# package name with KVERS included), DEB_DESTDIR (path to store DEBs) + +# The kdist_config target is called by make-kpkg modules_config and +# by kdist* rules by dependency. It should configure the module so it is +# ready for compilation (mostly useful for calling configure). +# prep-deb-files from module-assistant creates the neccessary debian/ files +kdist_config: prep-deb-files + +# the kdist_clean target is called by make-kpkg modules_clean and from +# kdist* rules. It is responsible for cleaning up any changes that have +# been made by the other kdist_commands (except for the .deb files created) +kdist_clean: clean + dh_testdir + dh_clean + SDK=$(realpath .) LINUX_UAPI_SPLIT=1 DEBIAN_LINUX_HEADER=1 KERNDIR=/usr/src/linux-headers-4.9.0-5-amd64 KERNEL_SRC=/usr/src/linux-headers-4.9.0-5-amd64 $(MAKE) -C systems/linux/user/x86-smp_generic_64-2_6 clean +# rm -f driver/*.o driver/*.ko +# +### end KERNEL SETUP + +configure: configure-stamp +configure-stamp: + dh_testdir + # Add here commands to configure the package. + + touch configure-stamp + + +build-arch: configure-stamp build-arch-stamp +build-arch-stamp: + dh_testdir + + # Add here command to compile/build the package. + SDK=$(realpath .) LINUX_UAPI_SPLIT=1 DEBIAN_LINUX_HEADER=1 KERNDIR=/usr/src/linux-headers-4.9.0-5-amd64 KERNEL_SRC=/usr/src/linux-headers-4.9.0-5-amd64 $(MAKE) -C systems/linux/user/x86-smp_generic_64-2_6 + + touch $@ + +#k = $(shell echo $(KVERS) | grep -q ^2.6 && echo k) + +build-indep: configure-stamp build-indep-stamp +build-indep-stamp: + dh_testdir + + # Add here command to compile/build the arch indep package. + # It's ok not to do anything here, if you don't need to build + # anything for this package. + #docbook-to-man debian/opennsl.sgml > opennsl.1 + + touch $@ + +build: build-arch + +clean: + dh_testdir + #dh_testroot + rm -f build-arch-stamp build-indep-stamp configure-stamp + + # Add here commands to clean up after the build process. + SDK=$(realpath .) LINUX_UAPI_SPLIT=1 DEBIAN_LINUX_HEADER=1 KERNDIR=/usr/src/linux-headers-4.9.0-5-amd64 KERNEL_SRC=/usr/src/linux-headers-4.9.0-5-amd64 $(MAKE) -C systems/linux/user/x86-smp_generic_64-2_6 clean + + dh_clean + +install: DH_OPTIONS= +install: build + dh_testdir + dh_testroot + dh_prep + dh_installdirs + dh_install + +# Build architecture-independent files here. +# Pass -i to all debhelper commands in this target to reduce clutter. +binary-indep: build install + dh_testdir -i + dh_testroot -i + dh_installchangelogs -i + dh_installdocs -i + dh_installexamples -i +# dh_install -i +# dh_installmenu -i +# dh_installdebconf -i +# dh_installlogrotate -i +# dh_installemacsen -i +# dh_installpam -i +# dh_installmime -i +# dh_installinit -i +# dh_installcron -i +# dh_installinfo -i + dh_installman -i + dh_link -i + dh_compress -i + dh_fixperms -i + dh_installdeb -i +# dh_perl -i +# dh_makeshlibs -i + dh_installdeb -i + dh_shlibdeps -i + dh_gencontrol -i + dh_md5sums -i + dh_builddeb -i + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir -s + dh_testroot -s +# dh_installdebconf -s + + dh_installdocs -s + dh_installexamples -s + dh_installmenu -s +# dh_installlogrotate -s +# dh_installemacsen -s +# dh_installpam -s +# dh_installmime -s + dh_installmodules -s + dh_systemd_enable -s + dh_installinit -s + dh_systemd_start -s + dh_installcron -s +# dh_installman -s + dh_installinfo -s + dh_installchangelogs -s + dh_strip -s + dh_link -s + dh_compress -s + dh_fixperms -s + dh_makeshlibs -s + dh_installdeb -s +# dh_perl -s + dh_shlibdeps -s + dh_gencontrol -s + dh_md5sums -s + dh_builddeb -s + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install configure binary-modules kdist kdist_configure kdist_image kdist_clean diff --git a/platform/broadcom/saibcm-modules/include/ibde.h b/platform/broadcom/saibcm-modules/include/ibde.h new file mode 100644 index 000000000000..c022e0b95aa0 --- /dev/null +++ b/platform/broadcom/saibcm-modules/include/ibde.h @@ -0,0 +1,158 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: ibde.h,v 1.27 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +#ifndef __IBDE_H__ +#define __IBDE_H__ + +#include + +/* + * Represents a collection of devices + */ + +typedef struct ibde_dev_s { + uint16 device; + uint8 rev; + sal_vaddr_t base_address; + sal_vaddr_t base_address1; + sal_vaddr_t base_address2; +} ibde_dev_t; + + +typedef struct ibde_s { + + const char *(*name)(void); + + /* Returns the number of devices available */ + /* Each device is is accessed through a handle */ + /* Handles are assumed to index the array of devices */ + + /* Support SWITCH or ETHERNET or CPU devices */ + int (*num_devices)(int type); +#define BDE_ALL_DEVICES 0 +#define BDE_SWITCH_DEVICES 1 +#define BDE_ETHER_DEVICES 2 +#define BDE_CPU_DEVICES 3 + + const ibde_dev_t *(*get_dev)(int d); + + /* + * Get types of underlaying devices. + * A combination of bus type and functional type is returned. + * In case of bus type, support PCI and SPI device types. + * In case of functional type, specify if underlaying device is + * a switching or ethernet device. + */ + uint32 (*get_dev_type)(int d); +#define BDE_PCI_DEV_TYPE SAL_PCI_DEV_TYPE /* PCI device */ +#define BDE_SPI_DEV_TYPE SAL_SPI_DEV_TYPE /* SPI device */ +#define BDE_EB_DEV_TYPE SAL_EB_DEV_TYPE /* EB device */ +#define BDE_ICS_DEV_TYPE SAL_ICS_DEV_TYPE /* ICS device */ +#define BDE_MII_DEV_TYPE SAL_MII_DEV_TYPE /* MII device */ +#define BDE_I2C_DEV_TYPE SAL_I2C_DEV_TYPE /* I2C device */ +#define BDE_AXI_DEV_TYPE SAL_AXI_DEV_TYPE /* AXI device */ +#define BDE_EMMI_DEV_TYPE SAL_EMMI_DEV_TYPE /* EMMI device */ +#define BDE_DEV_BUS_ALT SAL_DEV_BUS_ALT /* Alternate Access */ +#define BDE_DEV_BUS_MSI SAL_DEV_BUS_MSI /* Message-signaled interrupts */ + +#define BDE_DEV_BUS_TYPE_MASK SAL_DEV_BUS_TYPE_MASK + +#define BDE_SWITCH_DEV_TYPE SAL_SWITCH_DEV_TYPE /* Switch device */ +#define BDE_ETHER_DEV_TYPE SAL_ETHER_DEV_TYPE /* Ethernet device */ +#define BDE_CPU_DEV_TYPE SAL_CPU_DEV_TYPE /* CPU device */ + +#define BDE_BYTE_SWAP 0x01000000 /* SW byte swap */ +#define BDE_NO_IPROC 0x02000000 /* Device uses two BARs, but is not iProc */ + +#define BDE_256K_REG_SPACE 0x20000000 /* Map 256K (v 64K) */ +#define BDE_128K_REG_SPACE 0x40000000 /* Map 128K (v 64K) */ +#define BDE_320K_REG_SPACE 0x80000000 /* Map 256K+64K */ + +/* Bus supports only 16bit reads */ +#define BDE_DEV_BUS_RD_16BIT SAL_DEV_BUS_RD_16BIT + +/* Bus supports only 16bit writes */ +#define BDE_DEV_BUS_WR_16BIT SAL_DEV_BUS_WR_16BIT + +/* Backward compatibility */ +#define BDE_ET_DEV_TYPE BDE_MII_DEV_TYPE + +#define BDE_DEV_MEM_MAPPED(_d) \ + ((_d) & (BDE_PCI_DEV_TYPE | BDE_ICS_DEV_TYPE | BDE_EB_DEV_TYPE |\ + BDE_EMMI_DEV_TYPE | BDE_AXI_DEV_TYPE)) + + /* + * PCI Bus Access + */ + uint32 (*pci_conf_read)(int d, uint32 addr); + int (*pci_conf_write)(int d, uint32 addr, uint32 data); + void (*pci_bus_features)(int d, int *be_pio, int *be_packet, + int *be_other); + + uint32 (*read)(int d, uint32 addr); + int (*write)(int d, uint32 addr, uint32 data); + + uint32* (*salloc)(int d, int size, const char *name); + void (*sfree)(int d, void *ptr); + int (*sflush)(int d, void *addr, int length); + int (*sinval)(int d, void *addr, int length); + + int (*interrupt_connect)(int d, void (*)(void*), void *data); + int (*interrupt_disconnect)(int d); + + sal_paddr_t (*l2p)(int d, void *laddr); + void* (*p2l)(int d, sal_paddr_t paddr); + + /* + * SPI Access via SMP + */ + int (*spi_read)(int d, uint32 addr, uint8 *buf, int len); + int (*spi_write)(int d, uint32 addr, uint8 *buf, int len); + /* Special SPI access addresses */ +#define BDE_DEV_OP_EMMI_INIT SAL_DEV_OP_EMMI_INIT + + /* + * iProc register access + */ + uint32 (*iproc_read)(int d, uint32 addr); + int (*iproc_write)(int d, uint32 addr, uint32 data); + + /* + * Shared memory access + */ + uint32 (*shmem_read)(int dev, uint32 addr, uint8 *buf, uint32 len); + void (*shmem_write)(int dev, uint32 addr, uint8 *buf, uint32 len); + sal_vaddr_t (*shmem_map)(int dev, uint32 addr, uint32 size); + + /* + * cmic + */ + int (*get_cmic_ver)(int d, uint32 *ver); + +} ibde_t; + + +/* System BDE */ +extern ibde_t *bde; + + +#endif /* __IBDE_H__ */ diff --git a/platform/broadcom/saibcm-modules/include/kcom.h b/platform/broadcom/saibcm-modules/include/kcom.h new file mode 100644 index 000000000000..5755df250fb6 --- /dev/null +++ b/platform/broadcom/saibcm-modules/include/kcom.h @@ -0,0 +1,541 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: kcom.h,v 1.9 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + * + * File: kcom.h + * Purpose: User/Kernel message definitions + */ + +#ifndef _KCOM_H +#define _KCOM_H + +#include + +#define KCOM_CHAN_KNET "KCOM_KNET" + +/* + * Message types + */ +#define KCOM_MSG_TYPE_CMD 1 /* Command */ +#define KCOM_MSG_TYPE_RSP 2 /* Command response */ +#define KCOM_MSG_TYPE_EVT 3 /* Unsolicited event */ + + +/* + * Message opcodes + */ +#define KCOM_M_NONE 0 /* Should not be used */ +#define KCOM_M_VERSION 1 /* Protocol version */ +#define KCOM_M_STRING 2 /* For debug messages */ +#define KCOM_M_HW_RESET 3 /* H/W not ready */ +#define KCOM_M_HW_INIT 4 /* H/W initialized */ +#define KCOM_M_ETH_HW_CONFIG 5 /* ETH HW config*/ +#define KCOM_M_DETACH 6 /* Detach kernel module */ +#define KCOM_M_NETIF_CREATE 11 /* Create network interface */ +#define KCOM_M_NETIF_DESTROY 12 /* Destroy network interface */ +#define KCOM_M_NETIF_LIST 13 /* Get list of network interface IDs */ +#define KCOM_M_NETIF_GET 14 /* Get network interface info */ +#define KCOM_M_FILTER_CREATE 21 /* Create Rx filter */ +#define KCOM_M_FILTER_DESTROY 22 /* Destroy Rx filter */ +#define KCOM_M_FILTER_LIST 23 /* Get list of Rx filter IDs */ +#define KCOM_M_FILTER_GET 24 /* Get Rx filter info */ +#define KCOM_M_DMA_INFO 31 /* Tx/Rx DMA info */ +#define KCOM_M_DBGPKT_SET 41 /* Enbale debug packet function */ +#define KCOM_M_DBGPKT_GET 42 /* Get debug packet function info */ + +#define KCOM_VERSION 8 /* Protocol version */ + +/* + * Message status codes + */ +#define KCOM_E_NONE 0 /* No errors */ +#define KCOM_E_PARAM 1 /* Invalid/unsupported parameter */ +#define KCOM_E_RESOURCE 2 /* Out of memory or other resource */ +#define KCOM_E_NOT_FOUND 3 /* Requested object not found */ + +typedef struct kcom_msg_hdr_s { + uint8 type; + uint8 opcode; + uint8 seqno; + uint8 status; + uint8 unit; + uint8 reserved; + uint16 id; +} kcom_msg_hdr_t; + + +/* + * Object types + */ + +/* + * System network interface + * + * Network interface types: + * + * KCOM_NETIF_T_VLAN + * Transmits to this interface will go to ingress PIPE of switch + * CPU port using specified VLAN ID. Packet will be switched. + * + * KCOM_NETIF_T_PORT + * Transmits to this interface will go to unmodified to specified + * physical switch port. All switching logic is bypassed. + * + * KCOM_NETIF_T_META + * Transmits to this interface will be done using raw meta data + * as DMA descriptors. Currently used for RCPU mode only. + * + * Network interface flags: + * + * KCOM_NETIF_F_ADD_TAG + * Add VLAN tag to packets sent directly to physical port. + * + * KCOM_NETIF_F_RCPU_ENCAP + * Use RCPU encapsulation for packets that enter and exit this + * interface. + */ +#define KCOM_NETIF_T_VLAN 0 +#define KCOM_NETIF_T_PORT 1 +#define KCOM_NETIF_T_META 2 + +#define KCOM_NETIF_F_ADD_TAG (1U << 0) +#define KCOM_NETIF_F_RCPU_ENCAP (1U << 1) +/* If a netif has this flag, the packet sent to the netif can't be stripped tag or added tag */ +#define KCOM_NETIF_F_KEEP_RX_TAG (1U << 2) + +#define KCOM_NETIF_NAME_MAX 16 + +typedef struct kcom_netif_s { + uint16 id; + uint8 type; + uint8 flags; + uint32 cb_user_data; + uint8 port; + uint8 reserved; + uint16 vlan; + uint16 qnum; + uint8 macaddr[6]; + uint8 ptch[2]; + uint8 itmh[4]; + char name[KCOM_NETIF_NAME_MAX]; +} kcom_netif_t; + +/* + * Packet filters + * + * Filters work like software TCAMs where a mask is applied to the + * source data, and the result is then compared to the filter data. + * + * Filters are checked in priority order with the lowest priority + * values being checked first (i.e. 0 is the highest priority). + * + * Filter types: + * + * KCOM_FILTER_T_RX_PKT + * Filter data and mask are applied to the Rx DMA control block + * as well as to the Rx packet contents. + * + * Destination types: + * + * KCOM_DEST_T_NULL + * Packet is dropped. + * + * KCOM_DEST_T_NETIF + * Packet is sent to network interface with ID . + * + * KCOM_DEST_T_API + * Packet is sent to Rx API through queue . + * + * KCOM_DEST_T_CB + * Packet destination is obtained from kernel call-back function. + * + * Filter flags: + * + * KCOM_FILTER_F_ANY_DATA + * When this flags is set the filter will match any packet on + * the associated unit. + * + * KCOM_FILTER_F_STRIP_TAG + * Strip VLAN tag before packet is sent to destination. + * This flag only applies to KCOM_DEST_T_NETIF. + * + */ +#define KCOM_FILTER_BYTES_MAX 256 +#define KCOM_FILTER_WORDS_MAX BYTES2WORDS(KCOM_FILTER_BYTES_MAX) + +#define KCOM_FILTER_T_RX_PKT 1 + +#define KCOM_DEST_T_NULL 0 +#define KCOM_DEST_T_NETIF 1 +#define KCOM_DEST_T_API 2 +#define KCOM_DEST_T_CB 3 + +#define KCOM_FILTER_F_ANY_DATA (1U << 0) +#define KCOM_FILTER_F_STRIP_TAG (1U << 1) + +#define KCOM_FILTER_DESC_MAX 32 + +typedef struct kcom_filter_s { + uint16 id; + uint8 type; + uint8 priority; + char desc[KCOM_FILTER_DESC_MAX]; + uint32 flags; + uint32 cb_user_data; + uint16 dest_type; + uint16 dest_id; + uint16 dest_proto; + uint16 mirror_type; + uint16 mirror_id; + uint16 mirror_proto; + uint16 oob_data_offset; + uint16 oob_data_size; + uint16 pkt_data_offset; + uint16 pkt_data_size; + union { + uint8 b[KCOM_FILTER_BYTES_MAX]; + uint32 w[KCOM_FILTER_WORDS_MAX]; + } data; + union { + uint8 b[KCOM_FILTER_BYTES_MAX]; + uint32 w[KCOM_FILTER_WORDS_MAX]; + } mask; +} kcom_filter_t; + +/* + * DMA buffer information + * + * Cookie field is reserved use by application (32/64-bit pointer). + * + * For Tx operation the application will submit the start address of + * the Tx DCB chain which is queued for transfer by the kernel module. + * Once DMA is done a DMA event is returned to the application with an + * optional sequence number. + * + * For Rx operation the application will submit the start address of + * the Rx DCB chain which should be use for packet reception by the + * kernel module. Once DMA is done a DMA event is returned to the + * application with an optional sequence number. + * + * Cookie field is reserved use by application (32/64-bit pointer). + * + * Packet info types: + * + * KCOM_DMA_INFO_T_TX_DCB + * Data is physical start address of Tx DCB chain. + * + * KCOM_DMA_INFO_T_RX_DCB + * Data is physical start address of Rx DCB chain. + * + * Packet info flags: + * + * KCOM_DMA_INFO_F_TX_DONE + * This flag is set by the kernel module and means that one or more + * packets have been sent. + * + * KCOM_DMA_INFO_F_RX_DONE + * This flag is set by the kernel module and means that one or more + * Rx buffers contain valid packet data. + */ +#define KCOM_DMA_INFO_T_TX_DCB 1 +#define KCOM_DMA_INFO_T_RX_DCB 2 + +#define KCOM_DMA_INFO_F_TX_DONE (1U << 0) +#define KCOM_DMA_INFO_F_RX_DONE (1U << 1) + +typedef struct kcom_dma_info_s { + uint8 type; + uint8 cnt; + uint16 size; + uint16 chan; + uint16 flags; + union { + void *p; + uint8 b[8]; + } cookie; + union { + uint32 dcb_start; + struct { + uint32 tx; + uint32 rx; + } seqno; + } data; + } kcom_dma_info_t; + +/* Default channel configuration */ +#define KCOM_DMA_TX_CHAN 0 +#define KCOM_DMA_RX_CHAN 1 + + +#define KCOM_ETH_HW_T_RESET 1 +#define KCOM_ETH_HW_T_INIT 2 +#define KCOM_ETH_HW_T_OTHER 3 + +#define KCOM_ETH_HW_C_ALL 0xff + +#define KCOM_ETH_HW_RESET_F_TX (1U << 0) +#define KCOM_ETH_HW_RESET_F_RX (1U << 1) +#define KCOM_ETH_HW_RESET_F_TX_RECLAIM (1U << 2) +#define KCOM_ETH_HW_RESET_F_RX_RECLAIM (1U << 3) + +#define KCOM_ETH_HW_INIT_F_TX (1U << 0) +#define KCOM_ETH_HW_INIT_F_RX (1U << 1) +#define KCOM_ETH_HW_INIT_F_RX_FILL (1U << 2) + + +#define KCOM_ETH_HW_OTHER_F_FIFO_LOOPBACK (1U << 0) +#define KCOM_ETH_HW_OTHER_F_INTERRUPT (1U << 1) + + + + +typedef struct kcom_eth_hw_config_s { + uint8 type; + uint8 chan; + uint32 flags; + uint32 value; + } kcom_eth_hw_config_t; + +/* + * Message types + */ + +/* + * Request KCOM interface version of kernel module. + */ +typedef struct kcom_msg_version_s { + kcom_msg_hdr_t hdr; + uint32 version; + uint32 netif_max; + uint32 filter_max; +} kcom_msg_version_t; + +/* + * Send literal string to/from kernel module. + * Mainly for debugging purposes. + */ +#define KCOM_MSG_STRING_MAX 128 + +typedef struct kcom_msg_string_s { + kcom_msg_hdr_t hdr; + uint32 len; + char val[KCOM_MSG_STRING_MAX]; +} kcom_msg_string_t; + + +/* + * Indicate that eth hardware is about to be reset. Active + * DMA operations should be aborted and DMA and interrupts + * should be disabled. + */ +/* + * Indicate that eth hardware has been properly initialized + * for DMA operation to commence. + */ +typedef struct kcom_msg_eth_hw_config_s { + kcom_msg_hdr_t hdr; + kcom_eth_hw_config_t config; +} kcom_msg_eth_hw_config_t; + + +/* + * Indicate that switch hardware is about to be reset. Active + * DMA operations should be aborted and DMA and interrupts + * should be disabled. + */ +typedef struct kcom_msg_hw_reset_s { + kcom_msg_hdr_t hdr; + uint32 channels; +} kcom_msg_hw_reset_t; + +/* + * Indicate that switch hardware has been properly initialized + * for DMA operation to commence. + */ +typedef struct kcom_msg_hw_init_s { + kcom_msg_hdr_t hdr; + uint16 dcb_size; + uint16 dcb_type; + uint32 cdma_channels; +} kcom_msg_hw_init_t; + +/* + * Release blocked IOCTL threads and clean up as necessary. + */ +typedef struct kcom_msg_detach_s { + kcom_msg_hdr_t hdr; + uint32 flags; +} kcom_msg_detach_t; + +/* + * Enable/Disable debugging packet function. + */ +typedef struct kcom_msg_dbg_pkt_set_s { + kcom_msg_hdr_t hdr; + int enable; +} kcom_msg_dbg_pkt_set_t; + +/* + * Get debugging packet function info. + */ +typedef struct kcom_msg_dbg_pkt_get_s { + kcom_msg_hdr_t hdr; + int value; +} kcom_msg_dbg_pkt_get_t; + +/* + * Create new system network interface. The network interface will + * be associated with the specified switch unit number. + * The interface id and name will be assigned by the kernel module. + */ +typedef struct kcom_msg_netif_create_s { + kcom_msg_hdr_t hdr; + kcom_netif_t netif; +} kcom_msg_netif_create_t; + +/* + * Destroy system network interface. + */ +typedef struct kcom_msg_netif_destroy_s { + kcom_msg_hdr_t hdr; +} kcom_msg_netif_destroy_t; + +/* + * Get list of currently defined system network interfaces. + */ +#ifndef KCOM_NETIF_MAX +#define KCOM_NETIF_MAX 128 +#endif + +typedef struct kcom_msg_netif_list_s { + kcom_msg_hdr_t hdr; + uint32 ifcnt; + uint16 id[KCOM_NETIF_MAX]; +} kcom_msg_netif_list_t; + +/* + * Get detailed network interface information. + */ +typedef struct kcom_msg_netif_get_s { + kcom_msg_hdr_t hdr; + kcom_netif_t netif; +} kcom_msg_netif_get_t; + +/* + * Create new packet filter. + * The filter id will be assigned by the kernel module. + */ +typedef struct kcom_msg_filter_create_s { + kcom_msg_hdr_t hdr; + kcom_filter_t filter; +} kcom_msg_filter_create_t; + +/* + * Destroy packet filter. + */ +typedef struct kcom_msg_filter_destroy_s { + kcom_msg_hdr_t hdr; +} kcom_msg_filter_destroy_t; + +/* + * Get list of currently defined packet filters. + */ +#ifndef KCOM_FILTER_MAX +/* OPENNSL_FIXUP - Increased the filters to 1024 from 128 */ +#define KCOM_FILTER_MAX 1024 +#endif + +typedef struct kcom_msg_filter_list_s { + kcom_msg_hdr_t hdr; + uint32 fcnt; + uint16 id[KCOM_FILTER_MAX]; +} kcom_msg_filter_list_t; + +/* + * Get detailed packet filter information. + */ +typedef struct kcom_msg_filter_get_s { + kcom_msg_hdr_t hdr; + kcom_filter_t filter; +} kcom_msg_filter_get_t; + +/* + * DMA info + */ +typedef struct kcom_msg_dma_info_s { + kcom_msg_hdr_t hdr; + kcom_dma_info_t dma_info; +} kcom_msg_dma_info_t; + + +/* + * All messages (e.g. for generic receive) + */ + +typedef union kcom_msg_s { + kcom_msg_hdr_t hdr; + kcom_msg_version_t version; + kcom_msg_string_t string; + kcom_msg_hw_reset_t hw_reset; + kcom_msg_hw_init_t hw_init; + kcom_msg_eth_hw_config_t eth_hw_config; + kcom_msg_detach_t detach; + kcom_msg_netif_create_t netif_create; + kcom_msg_netif_destroy_t netif_destroy; + kcom_msg_netif_list_t netif_list; + kcom_msg_netif_get_t netif_get; + kcom_msg_filter_create_t filter_create; + kcom_msg_filter_destroy_t filter_destroy; + kcom_msg_filter_list_t filter_list; + kcom_msg_filter_get_t filter_get; + kcom_msg_dma_info_t dma_info; + kcom_msg_dbg_pkt_set_t dbg_pkt_set; + kcom_msg_dbg_pkt_get_t dbg_pkt_get; +} kcom_msg_t; + + +/* + * KCOM communication channel vectors + * + * open + * Open KCOM channel. + * + * close + * Close KCOM channel. + * + * send + * Send KCOM message. If bufsz is non-zero, a synchronous send will be + * performed (if supported) and the function will return the number of + * bytes in the response. + * + * recv + * Receive KCOM message. This function is used t oreceive unsolicited + * messages from the kernel. If synchronous send is not supported, this + * function is also used to retrieve responses to command messages. + */ + +typedef struct kcom_chan_s { + void *(*open)(char *name); + int (*close)(void *handle); + int (*send)(void *handle, void *msg, unsigned int len, unsigned int bufsz); + int (*recv)(void *handle, void *msg, unsigned int bufsz); +} kcom_chan_t; + +#endif /* _KCOM_H */ diff --git a/platform/broadcom/saibcm-modules/include/sal/core/sync.h b/platform/broadcom/saibcm-modules/include/sal/core/sync.h new file mode 100644 index 000000000000..edac848b504b --- /dev/null +++ b/platform/broadcom/saibcm-modules/include/sal/core/sync.h @@ -0,0 +1,39 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: sync.h,v 1.1 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +#ifndef _SAL_SYNC_H +#define _SAL_SYNC_H + +typedef struct sal_sem_s{ + char sal_opaque_type; +} *sal_sem_t; + +#define sal_sem_FOREVER (-1) +#define sal_sem_BINARY 1 +#define sal_sem_COUNTING 0 + +sal_sem_t sal_sem_create(char *desc, int binary, int initial_count); +void sal_sem_destroy(sal_sem_t b); +int sal_sem_take(sal_sem_t b, int usec); +int sal_sem_give(sal_sem_t b); + +#endif /* !_SAL_SYNC_H */ diff --git a/platform/broadcom/saibcm-modules/include/sal/core/thread.h b/platform/broadcom/saibcm-modules/include/sal/core/thread.h new file mode 100644 index 000000000000..1bccb1aaa3ab --- /dev/null +++ b/platform/broadcom/saibcm-modules/include/sal/core/thread.h @@ -0,0 +1,31 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: thread.h,v 1.1 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +#ifndef _SAL_THREAD_H +#define _SAL_THREAD_H + +#include + +void sal_usleep(uint32 usec); +void sal_udelay(uint32 usec); + +#endif /* !_SAL_THREAD_H */ diff --git a/platform/broadcom/saibcm-modules/include/sal/types.h b/platform/broadcom/saibcm-modules/include/sal/types.h new file mode 100644 index 000000000000..29e6fc6522a0 --- /dev/null +++ b/platform/broadcom/saibcm-modules/include/sal/types.h @@ -0,0 +1,156 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: types.h,v 1.3 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + * + * File: types.h + * Purpose: SAL type definitions + */ + +#ifndef _SAL_TYPES_H +#define _SAL_TYPES_H + +/* + * Define platform-independent types + */ + +#ifndef TRUE +#define TRUE 1 +#endif + +#ifndef FALSE +#define FALSE 0 +#endif + +#ifndef NULL +#define NULL 0 +#endif + +#ifndef DONT_CARE +#define DONT_CARE 0 +#endif + +#define VOL volatile + +/* + * 64-bit type + */ + +#ifdef LONGS_ARE_64BITS + +#define COMPILER_64BIT +#define COMPILER_UINT64 unsigned long +#define u64_H(v) (((uint32 *) &(v))[u64_MSW]) +#define u64_L(v) (((uint32 *) &(v))[u64_LSW]) + +#else /* !LONGS_ARE_64BITS */ + +#define COMPILER_64BIT +#define COMPILER_UINT64 unsigned long long +#define u64_H(v) (((uint32 *) &(v))[u64_MSW]) +#define u64_L(v) (((uint32 *) &(v))[u64_LSW]) + +#endif /* LONGS_ARE_64BITS */ + +/* + * Define unsigned and signed integers with guaranteed sizes. + * Adjust if your compiler uses different sizes for short or int. + */ + +typedef unsigned char uint8; /* 8-bit quantity */ +typedef unsigned short uint16; /* 16-bit quantity */ +typedef unsigned int uint32; /* 32-bit quantity */ +typedef COMPILER_UINT64 uint64; /* 64-bit quantity */ + +typedef signed char int8; /* 8-bit quantity */ +typedef signed short int16; /* 16-bit quantity */ +typedef signed int int32; /* 32-bit quantity */ + +#define BITS2BYTES(x) (((x) + 7) / 8) +#define BITS2WORDS(x) (((x) + 31) / 32) + +#define BYTES2BITS(x) ((x) * 8) +#define BYTES2WORDS(x) (((x) + 3) / 4) + +#define WORDS2BITS(x) ((x) * 32) +#define WORDS2BYTES(x) ((x) * 4) + +#define COUNTOF(ary) ((int) (sizeof (ary) / sizeof ((ary)[0]))) + +typedef uint32 sal_paddr_t; /* Physical address (PCI address) */ + +#ifdef PTRS_ARE_64BITS +typedef uint64 sal_vaddr_t; /* Virtual address (Host address) */ +#define PTR_TO_INT(x) ((uint32)(((sal_vaddr_t)(x))&0xFFFFFFFF)) +#else +typedef uint32 sal_vaddr_t; /* Virtual address (Host address) */ +#define PTR_TO_INT(x) ((uint32)(x)) +#endif + +#define INT_TO_PTR(x) ((void *)((sal_vaddr_t)(x))) + +#define PTR_TO_UINTPTR(x) ((sal_vaddr_t)(x)) +#define UINTPTR_TO_PTR(x) ((void *)(x)) + +typedef union +{ + uint8 u8; + uint16 u16; + uint32 u32; + uint64 u64; + sal_paddr_t paddr; + sal_vaddr_t vaddr; + void *ptr; +} any_t; + +/* Device bus types */ +#define SAL_PCI_DEV_TYPE 0x00001 /* PCI device */ +#define SAL_SPI_DEV_TYPE 0x00002 /* SPI device */ +#define SAL_EB_DEV_TYPE 0x00004 /* EB device */ +#define SAL_ICS_DEV_TYPE 0x00008 /* ICS device */ +#define SAL_MII_DEV_TYPE 0x00010 /* MII device */ +#define SAL_RCPU_DEV_TYPE 0x00020 /* RCPU device */ +#define SAL_I2C_DEV_TYPE 0x00040 /* I2C device */ +#define SAL_AXI_DEV_TYPE 0x00080 /* AXI device */ +#define SAL_EMMI_DEV_TYPE 0x10000 /* EMMI device */ +#define SAL_DEV_BUS_TYPE_MASK 0xf00ff /* Odd for historical reasons */ + +/* Device types */ +#define SAL_SWITCH_DEV_TYPE 0x00100 /* Switch device */ +#define SAL_ETHER_DEV_TYPE 0x00200 /* Ethernet device */ +#define SAL_CPU_DEV_TYPE 0x00400 /* CPU device */ +#define SAL_DEV_TYPE_MASK 0x00f00 + +/* Access types */ +#define SAL_DEV_BUS_RD_16BIT 0x01000 /* 16 bit reads on bus */ +#define SAL_DEV_BUS_WR_16BIT 0x02000 /* 16 bit writes on bus */ +#define SAL_DEV_BUS_ALT 0x04000 /* Alternate access */ +#define SAL_DEV_BUS_MSI 0x08000 /* Message-signaled interrupts */ +#define SAL_DEV_FLAG_MASK 0x0f000 + +/* BDE reserved mask (cannot be used by SAL) */ +#define SAL_DEV_BDE_MASK 0xff000000 + +/* Backward compatibility */ +#define SAL_ET_DEV_TYPE SAL_MII_DEV_TYPE + +/* Special access addresses */ +#define SAL_DEV_OP_EMMI_INIT 0x0fff1000 + +#endif /* !_SAL_TYPES_H */ diff --git a/platform/broadcom/saibcm-modules/include/sdk_config.h b/platform/broadcom/saibcm-modules/include/sdk_config.h new file mode 100644 index 000000000000..5a1bcaddfc40 --- /dev/null +++ b/platform/broadcom/saibcm-modules/include/sdk_config.h @@ -0,0 +1,46 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: sdk_config.h,v 1.5 Broadcom SDK $ + * $Copyright: (c) 2006 Broadcom Corp. + * All Rights Reserved.$ + * + * + */ + +#ifndef __SDK_CONFIG_H__ +#define __SDK_CONFIG_H__ + +/* + * Include custom overrides + */ +#ifdef SDK_INCLUDE_CUSTOM_CONFIG +#include +#endif + + +/* + * Memory Barrier operation if required. + * Defaults to nothing. + */ +#ifndef SDK_CONFIG_MEMORY_BARRIER +#define SDK_CONFIG_MEMORY_BARRIER +#endif + + + +#endif /* __SDK_CONFIG_H__ */ diff --git a/platform/broadcom/saibcm-modules/include/soc/cmic.h b/platform/broadcom/saibcm-modules/include/soc/cmic.h new file mode 100644 index 000000000000..c6cfc25c7595 --- /dev/null +++ b/platform/broadcom/saibcm-modules/include/soc/cmic.h @@ -0,0 +1,38 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: cmic.h,v 1.1 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + * + * File: cmic.h + * Purpose: Maps out structures used for CMIC operations and + * exports routines and constants. + */ + +#ifndef _SOC_CMIC_H +#define _SOC_CMIC_H + +/* IRQ Register (RO) */ +#define CMIC_IRQ_STAT 0x00000144 + +/* IRQ Mask Registers (R/W) */ +#define CMIC_IRQ_MASK 0x00000148 +#define CMIC_IRQ_MASK_1 0x0000006C +#define CMIC_IRQ_MASK_2 0x00000070 + +#endif /* !_SOC_CMIC_H */ diff --git a/platform/broadcom/saibcm-modules/include/soc/devids.h b/platform/broadcom/saibcm-modules/include/soc/devids.h new file mode 100644 index 000000000000..69fba7777c1a --- /dev/null +++ b/platform/broadcom/saibcm-modules/include/soc/devids.h @@ -0,0 +1,1948 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * Copyright: (c) 2017 Broadcom Corp. + * All Rights Reserved. + */ + +#ifndef _SOC_DEVIDS_H +#define _SOC_DEVIDS_H + + +#define BROADCOM_VENDOR_ID 0x14e4 + +#define BCM5690_DEVICE_ID 0x5690 +#define BCM5690_A0_REV_ID 1 +#define BCM5690_A1_REV_ID 2 +#define BCM5690_A2_REV_ID 3 + +#define BCM5691_DEVICE_ID 0x5691 +#define BCM5691_A0_REV_ID 1 +#define BCM5691_A1_REV_ID 2 +#define BCM5691_A2_REV_ID 3 + +#define BCM5692_DEVICE_ID 0x5692 +#define BCM5692_A0_REV_ID 1 +#define BCM5692_A1_REV_ID 2 +#define BCM5692_A2_REV_ID 3 + +#define BCM5693_DEVICE_ID 0x5693 +#define BCM5693_A0_REV_ID 1 +#define BCM5693_A1_REV_ID 2 +#define BCM5693_A2_REV_ID 3 + +#define BCM5695_DEVICE_ID 0x5695 +#define BCM5695_A0_REV_ID 1 +#define BCM5695_A1_REV_ID 2 +#define BCM5695_B0_REV_ID 0x11 + +#define BCM5696_DEVICE_ID 0x5696 +#define BCM5696_A0_REV_ID 1 +#define BCM5696_A1_REV_ID 2 +#define BCM5696_B0_REV_ID 0x11 + +#define BCM5697_DEVICE_ID 0x5697 +#define BCM5697_A0_REV_ID 1 +#define BCM5697_A1_REV_ID 2 +#define BCM5697_B0_REV_ID 0x11 + +#define BCM5698_DEVICE_ID 0x5698 +#define BCM5698_A0_REV_ID 1 +#define BCM5698_A1_REV_ID 2 +#define BCM5698_B0_REV_ID 0x11 + +#define BCM5670_DEVICE_ID 0x5670 +#define BCM5670_A0_REV_ID 1 +#define BCM5670_A1_REV_ID 2 + +#define BCM5671_DEVICE_ID 0x5671 +#define BCM5671_A0_REV_ID 1 +#define BCM5671_A1_REV_ID 2 +#define BCM5671_A2_REV_ID 3 + +#define BCM5675_DEVICE_ID 0x5675 +#define BCM5675_A0_REV_ID 1 +#define BCM5675_A1_REV_ID 2 + +#define BCM5676_DEVICE_ID 0x5676 +#define BCM5676_A0_REV_ID 1 +#define BCM5676_A1_REV_ID 2 + +#define BCM5673_DEVICE_ID 0x5673 +#define BCM5673_A0_REV_ID 1 +#define BCM5673_A1_REV_ID 2 +#define BCM5673_A2_REV_ID 3 + +#define BCM5674_DEVICE_ID 0x5674 +#define BCM5674_A0_REV_ID 1 + +#define BCM56100_DEVICE_ID 0xb100 +#define BCM56100_A0_REV_ID 1 +#define BCM56100_A1_REV_ID 2 +#define BCM56101_DEVICE_ID 0xb101 +#define BCM56101_A0_REV_ID 1 +#define BCM56101_A1_REV_ID 2 +#define BCM56102_DEVICE_ID 0xb102 +#define BCM56102_A0_REV_ID 1 +#define BCM56102_A1_REV_ID 2 +#define BCM56105_DEVICE_ID 0xb105 +#define BCM56105_A0_REV_ID 1 +#define BCM56105_A1_REV_ID 2 +#define BCM56106_DEVICE_ID 0xb106 +#define BCM56106_A0_REV_ID 1 +#define BCM56106_A1_REV_ID 2 +#define BCM56107_DEVICE_ID 0xb107 +#define BCM56107_A0_REV_ID 1 +#define BCM56107_A1_REV_ID 2 + +#define BCM56110_DEVICE_ID 0xb110 +#define BCM56110_A0_REV_ID 1 +#define BCM56111_DEVICE_ID 0xb111 +#define BCM56111_A0_REV_ID 1 +#define BCM56112_DEVICE_ID 0xb112 +#define BCM56112_A0_REV_ID 1 +#define BCM56115_DEVICE_ID 0xb115 +#define BCM56115_A0_REV_ID 1 +#define BCM56116_DEVICE_ID 0xb116 +#define BCM56116_A0_REV_ID 1 +#define BCM56117_DEVICE_ID 0xb117 +#define BCM56117_A0_REV_ID 1 + +#define BCM56300_DEVICE_ID 0xb300 +#define BCM56300_A0_REV_ID 1 +#define BCM56300_A1_REV_ID 2 +#define BCM56300_B0_REV_ID 0x11 +#define BCM56300_B1_REV_ID 0x12 +#define BCM56301_DEVICE_ID 0xb301 +#define BCM56301_A0_REV_ID 1 +#define BCM56301_A1_REV_ID 2 +#define BCM56301_B0_REV_ID 0x11 +#define BCM56301_B1_REV_ID 0x12 +#define BCM56302_DEVICE_ID 0xb302 +#define BCM56302_A0_REV_ID 1 +#define BCM56302_A1_REV_ID 2 +#define BCM56302_B0_REV_ID 0x11 +#define BCM56302_B1_REV_ID 0x12 +#define BCM56303_DEVICE_ID 0xb303 +#define BCM56303_A1_REV_ID 2 +#define BCM56303_A0_REV_ID 1 +#define BCM56303_B0_REV_ID 0x11 +#define BCM56303_B1_REV_ID 0x12 +#define BCM56304_DEVICE_ID 0xb304 +#define BCM56304_A0_REV_ID 1 +#define BCM56304_A1_REV_ID 2 +#define BCM56304_B0_REV_ID 0x11 +#define BCM56304_B1_REV_ID 0x12 +#define BCM56404_DEVICE_ID 0xb404 +#define BCM56404_A0_REV_ID 1 +#define BCM56404_A1_REV_ID 2 +#define BCM56305_DEVICE_ID 0xb305 +#define BCM56305_A0_REV_ID 1 +#define BCM56305_A1_REV_ID 2 +#define BCM56305_B0_REV_ID 0x11 +#define BCM56305_B1_REV_ID 0x12 +#define BCM56306_DEVICE_ID 0xb306 +#define BCM56306_A0_REV_ID 1 +#define BCM56306_A1_REV_ID 2 +#define BCM56306_B0_REV_ID 0x11 +#define BCM56306_B1_REV_ID 0x12 +#define BCM56307_DEVICE_ID 0xb307 +#define BCM56307_A0_REV_ID 1 +#define BCM56307_A1_REV_ID 2 +#define BCM56307_B0_REV_ID 0x11 +#define BCM56307_B1_REV_ID 0x12 +#define BCM56308_DEVICE_ID 0xb308 +#define BCM56308_A0_REV_ID 1 +#define BCM56308_A1_REV_ID 2 +#define BCM56308_B0_REV_ID 0x11 +#define BCM56308_B1_REV_ID 0x12 +#define BCM56309_DEVICE_ID 0xb309 +#define BCM56309_A0_REV_ID 1 +#define BCM56309_A1_REV_ID 2 +#define BCM56309_B0_REV_ID 0x11 +#define BCM56309_B1_REV_ID 0x12 + +#define BCM56310_DEVICE_ID 0xb310 +#define BCM56310_A0_REV_ID 1 +#define BCM56311_DEVICE_ID 0xb311 +#define BCM56311_A0_REV_ID 1 +#define BCM56312_DEVICE_ID 0xb312 +#define BCM56312_A0_REV_ID 1 +#define BCM56313_DEVICE_ID 0xb313 +#define BCM56313_A0_REV_ID 1 +#define BCM56314_DEVICE_ID 0xb314 +#define BCM56314_A0_REV_ID 1 +#define BCM56315_DEVICE_ID 0xb315 +#define BCM56315_A0_REV_ID 1 +#define BCM56316_DEVICE_ID 0xb316 +#define BCM56316_A0_REV_ID 1 +#define BCM56317_DEVICE_ID 0xb317 +#define BCM56317_A0_REV_ID 1 +#define BCM56318_DEVICE_ID 0xb318 +#define BCM56318_A0_REV_ID 1 +#define BCM56319_DEVICE_ID 0xb319 +#define BCM56319_A0_REV_ID 1 + +#ifndef EXCLUDE_BCM56324 +#define BCM56322_DEVICE_ID 0xb322 +#define BCM56322_A0_REV_ID 1 +#define BCM56324_DEVICE_ID 0xb324 +#define BCM56324_A0_REV_ID 1 +#endif + +#define BCM53300_DEVICE_ID 0xb006 +#define BCM53300_A0_REV_ID 0x11 +#define BCM53300_A1_REV_ID 0x12 +#define BCM53301_DEVICE_ID 0xb206 +#define BCM53301_A0_REV_ID 0x11 +#define BCM53301_A1_REV_ID 0x12 +#define BCM53302_DEVICE_ID 0xb008 +#define BCM53302_A0_REV_ID 0x11 +#define BCM53302_A1_REV_ID 0x12 + +#define BCM56500_DEVICE_ID 0xb500 +#define BCM56500_A0_REV_ID 1 +#define BCM56500_A1_REV_ID 2 +#define BCM56500_B0_REV_ID 0x11 +#define BCM56500_B1_REV_ID 0x12 +#define BCM56500_B2_REV_ID 0x13 +#define BCM56501_DEVICE_ID 0xb501 +#define BCM56501_A0_REV_ID 1 +#define BCM56501_A1_REV_ID 2 +#define BCM56501_B0_REV_ID 0x11 +#define BCM56501_B1_REV_ID 0x12 +#define BCM56501_B2_REV_ID 0x13 +#define BCM56502_DEVICE_ID 0xb502 +#define BCM56502_A0_REV_ID 1 +#define BCM56502_A1_REV_ID 2 +#define BCM56502_B0_REV_ID 0x11 +#define BCM56502_B1_REV_ID 0x12 +#define BCM56502_B2_REV_ID 0x13 +#define BCM56503_DEVICE_ID 0xb503 +#define BCM56503_A0_REV_ID 1 +#define BCM56503_A1_REV_ID 2 +#define BCM56503_B0_REV_ID 0x11 +#define BCM56503_B1_REV_ID 0x12 +#define BCM56503_B2_REV_ID 0x13 +#define BCM56504_DEVICE_ID 0xb504 +#define BCM56504_A0_REV_ID 1 +#define BCM56504_A1_REV_ID 2 +#define BCM56504_B0_REV_ID 0x11 +#define BCM56504_B1_REV_ID 0x12 +#define BCM56504_B2_REV_ID 0x13 +#define BCM56505_DEVICE_ID 0xb505 +#define BCM56505_A0_REV_ID 1 +#define BCM56505_A1_REV_ID 2 +#define BCM56505_B0_REV_ID 0x11 +#define BCM56505_B1_REV_ID 0x12 +#define BCM56505_B2_REV_ID 0x13 +#define BCM56506_DEVICE_ID 0xb506 +#define BCM56506_A0_REV_ID 1 +#define BCM56506_A1_REV_ID 2 +#define BCM56506_B0_REV_ID 0x11 +#define BCM56506_B1_REV_ID 0x12 +#define BCM56506_B2_REV_ID 0x13 +#define BCM56507_DEVICE_ID 0xb507 +#define BCM56507_A0_REV_ID 1 +#define BCM56507_A1_REV_ID 2 +#define BCM56507_B0_REV_ID 0x11 +#define BCM56507_B1_REV_ID 0x12 +#define BCM56507_B2_REV_ID 0x13 +#define BCM56508_DEVICE_ID 0xb508 +#define BCM56508_A0_REV_ID 1 +#define BCM56508_A1_REV_ID 2 +#define BCM56508_B0_REV_ID 0x11 +#define BCM56508_B1_REV_ID 0x12 +#define BCM56508_B2_REV_ID 0x13 +#define BCM56509_DEVICE_ID 0xb509 +#define BCM56509_A0_REV_ID 1 +#define BCM56509_A1_REV_ID 2 +#define BCM56509_B0_REV_ID 0x11 +#define BCM56509_B1_REV_ID 0x12 +#define BCM56509_B2_REV_ID 0x13 + +#define BCM56600_DEVICE_ID 0xb600 +#define BCM56600_A0_REV_ID 1 +#define BCM56600_B0_REV_ID 0x11 +#define BCM56600_C0_REV_ID 0x21 +#define BCM56601_DEVICE_ID 0xb601 +#define BCM56601_A0_REV_ID 1 +#define BCM56601_B0_REV_ID 0x11 +#define BCM56601_C0_REV_ID 0x21 +#define BCM56602_DEVICE_ID 0xb602 +#define BCM56602_A0_REV_ID 1 +#define BCM56602_B0_REV_ID 0x11 +#define BCM56602_C0_REV_ID 0x21 +#define BCM56603_DEVICE_ID 0xb603 +#define BCM56603_A0_REV_ID 1 +#define BCM56603_B0_REV_ID 0x11 +#define BCM56603_C0_REV_ID 0x21 +#define BCM56605_DEVICE_ID 0xb605 +#define BCM56605_A0_REV_ID 1 +#define BCM56605_B0_REV_ID 0x11 +#define BCM56605_C0_REV_ID 0x21 +#define BCM56606_DEVICE_ID 0xb606 +#define BCM56606_A0_REV_ID 1 +#define BCM56606_B0_REV_ID 0x11 +#define BCM56606_C0_REV_ID 0x21 +#define BCM56607_DEVICE_ID 0xb607 +#define BCM56607_A0_REV_ID 1 +#define BCM56607_B0_REV_ID 0x11 +#define BCM56607_C0_REV_ID 0x21 +#define BCM56608_DEVICE_ID 0xb608 +#define BCM56608_A0_REV_ID 1 +#define BCM56608_B0_REV_ID 0x11 +#define BCM56608_C0_REV_ID 0x21 + +#define BCM56580_DEVICE_ID 0xb580 +#define BCM56580_A0_REV_ID 1 + +#define BCM56700_DEVICE_ID 0xb700 +#define BCM56700_A0_REV_ID 1 +#define BCM56701_DEVICE_ID 0xb701 +#define BCM56701_A0_REV_ID 1 + +#define BCM56800_DEVICE_ID 0xb800 +#define BCM56800_A0_REV_ID 1 +#define BCM56801_DEVICE_ID 0xb801 +#define BCM56801_A0_REV_ID 1 +#define BCM56802_DEVICE_ID 0xb802 +#define BCM56802_A0_REV_ID 1 +#define BCM56803_DEVICE_ID 0xb803 +#define BCM56803_A0_REV_ID 1 + +#define BCM56224_DEVICE_ID 0xb224 +#define BCM56224_A0_REV_ID 1 +#define BCM56224_B0_REV_ID 0x11 +#define BCM56225_DEVICE_ID 0xb225 +#define BCM56225_A0_REV_ID 1 +#define BCM56225_B0_REV_ID 0x11 +#define BCM56226_DEVICE_ID 0xb226 +#define BCM56226_A0_REV_ID 1 +#define BCM56226_B0_REV_ID 0x11 +#define BCM56227_DEVICE_ID 0xb227 +#define BCM56227_A0_REV_ID 1 +#define BCM56227_B0_REV_ID 0x11 +#define BCM56228_DEVICE_ID 0xb228 +#define BCM56228_A0_REV_ID 1 +#define BCM56228_B0_REV_ID 0x11 +#define BCM56229_DEVICE_ID 0xb229 +#define BCM56229_A0_REV_ID 1 +#define BCM56229_B0_REV_ID 0x11 +#define BCM56024_DEVICE_ID 0xb024 +#define BCM56024_A0_REV_ID 1 +#define BCM56024_B0_REV_ID 0x11 +#define BCM56025_DEVICE_ID 0xb025 +#define BCM56025_A0_REV_ID 1 +#define BCM56025_B0_REV_ID 0x11 +#define BCM53724_DEVICE_ID 0xc724 +#define BCM53724_A0_REV_ID 1 +#define BCM53724_B0_REV_ID 0x11 +#define BCM53726_DEVICE_ID 0xc726 +#define BCM53726_A0_REV_ID 1 +#define BCM53726_B0_REV_ID 0x11 + +#define BCM53312_DEVICE_ID 0xc312 +#define BCM53312_A0_REV_ID 1 +#define BCM53312_B0_REV_ID 0x11 +#define BCM53313_DEVICE_ID 0xc313 +#define BCM53313_A0_REV_ID 1 +#define BCM53313_B0_REV_ID 0x11 +#define BCM53314_DEVICE_ID 0xc314 +#define BCM53314_A0_REV_ID 1 +#define BCM53314_B0_REV_ID 0x11 + +#define BCM53322_DEVICE_ID 0xc322 +#define BCM53322_A0_REV_ID 1 +#define BCM53323_DEVICE_ID 0xc323 +#define BCM53323_A0_REV_ID 1 +#define BCM53324_DEVICE_ID 0xc324 +#define BCM53324_A0_REV_ID 1 + + +#define BCM56218_DEVICE_ID 0xB218 +#define BCM56218_A0_REV_ID 1 +#define BCM56218_A1_REV_ID 2 +#define BCM56218_A2_REV_ID 3 +#define BCM56218X_DEVICE_ID 0xc710 +#define BCM56218X_A0_REV_ID 1 +#define BCM56218X_A1_REV_ID 2 +#define BCM56218X_A2_REV_ID 3 +#define BCM56219_DEVICE_ID 0xB219 +#define BCM56219_A0_REV_ID 1 +#define BCM56219_A1_REV_ID 2 +#define BCM56219_A2_REV_ID 3 +#define BCM56218R_DEVICE_ID 0xB21A +#define BCM56218R_A0_REV_ID 1 +#define BCM56218R_A1_REV_ID 2 +#define BCM56218R_A2_REV_ID 3 +#define BCM56219R_DEVICE_ID 0xB21B +#define BCM56219R_A0_REV_ID 1 +#define BCM56219R_A1_REV_ID 2 +#define BCM56219R_A2_REV_ID 3 +#define BCM56214_DEVICE_ID 0xB214 +#define BCM56214_A0_REV_ID 1 +#define BCM56214_A1_REV_ID 2 +#define BCM56214_A2_REV_ID 3 +#define BCM56215_DEVICE_ID 0xB215 +#define BCM56215_A0_REV_ID 1 +#define BCM56215_A1_REV_ID 2 +#define BCM56215_A2_REV_ID 3 +#define BCM56214R_DEVICE_ID 0xB21C +#define BCM56214R_A0_REV_ID 1 +#define BCM56214R_A1_REV_ID 2 +#define BCM56214R_A2_REV_ID 3 +#define BCM56215R_DEVICE_ID 0xB21D +#define BCM56215R_A0_REV_ID 1 +#define BCM56215R_A1_REV_ID 2 +#define BCM56215R_A2_REV_ID 3 +#define BCM56216_DEVICE_ID 0xB216 +#define BCM56216_A0_REV_ID 1 +#define BCM56216_A1_REV_ID 2 +#define BCM56216_A2_REV_ID 3 +#define BCM56217_DEVICE_ID 0xB217 +#define BCM56217_A0_REV_ID 1 +#define BCM56217_A1_REV_ID 2 +#define BCM56217_A2_REV_ID 3 +#define BCM56212_DEVICE_ID 0xB212 +#define BCM56212_A0_REV_ID 1 +#define BCM56212_A1_REV_ID 2 +#define BCM56212_A2_REV_ID 3 +#define BCM56213_DEVICE_ID 0xB213 +#define BCM56213_A0_REV_ID 1 +#define BCM56213_A1_REV_ID 2 +#define BCM56213_A2_REV_ID 3 +#define BCM53718_DEVICE_ID 0xC71A +#define BCM53718_A0_REV_ID 1 +#define BCM53718_A1_REV_ID 2 +#define BCM53718_A2_REV_ID 3 +#define BCM53714_DEVICE_ID 0xC71B +#define BCM53714_A0_REV_ID 1 +#define BCM53714_A1_REV_ID 2 +#define BCM53714_A2_REV_ID 3 +#define BCM53716_DEVICE_ID 0xC716 +#define BCM53716_A0_REV_ID 1 +#define BCM53716_A1_REV_ID 2 +#define BCM53716_A2_REV_ID 3 +#define BCM56018_DEVICE_ID 0xB018 +#define BCM56018_A0_REV_ID 1 +#define BCM56018_A1_REV_ID 2 +#define BCM56018_A2_REV_ID 3 +#define BCM56014_DEVICE_ID 0xB014 +#define BCM56014_A0_REV_ID 1 +#define BCM56014_A1_REV_ID 2 +#define BCM56014_A2_REV_ID 3 + +#define BCM56510_DEVICE_ID 0xb510 +#define BCM56510_A0_REV_ID 1 +#define BCM56511_DEVICE_ID 0xb511 +#define BCM56511_A0_REV_ID 1 +#define BCM56512_DEVICE_ID 0xb512 +#define BCM56512_A0_REV_ID 1 +#define BCM56513_DEVICE_ID 0xb513 +#define BCM56513_A0_REV_ID 1 +#define BCM56514_DEVICE_ID 0xb514 +#define BCM56514_A0_REV_ID 1 +#define BCM56516_DEVICE_ID 0xb516 +#define BCM56516_A0_REV_ID 1 +#define BCM56517_DEVICE_ID 0xb517 +#define BCM56517_A0_REV_ID 1 +#define BCM56518_DEVICE_ID 0xb518 +#define BCM56518_A0_REV_ID 1 +#define BCM56519_DEVICE_ID 0xb519 +#define BCM56519_A0_REV_ID 1 + +#define BCM56620_DEVICE_ID 0xb620 +#define BCM56620_A0_REV_ID 1 +#define BCM56620_A1_REV_ID 2 +#define BCM56620_B0_REV_ID 0x11 +#define BCM56620_B1_REV_ID 0x12 +#define BCM56620_B2_REV_ID 0x13 +#define BCM56624_DEVICE_ID 0xb624 +#define BCM56624_A0_REV_ID 1 +#define BCM56624_A1_REV_ID 2 +#define BCM56624_B0_REV_ID 0x11 +#define BCM56624_B1_REV_ID 0x12 +#define BCM56624_B2_REV_ID 0x13 +#define BCM56626_DEVICE_ID 0xb626 +#define BCM56626_A0_REV_ID 1 +#define BCM56626_A1_REV_ID 2 +#define BCM56626_B0_REV_ID 0x11 +#define BCM56626_B1_REV_ID 0x12 +#define BCM56626_B2_REV_ID 0x13 +#define BCM56628_DEVICE_ID 0xb628 +#define BCM56628_A0_REV_ID 1 +#define BCM56628_A1_REV_ID 2 +#define BCM56628_B0_REV_ID 0x11 +#define BCM56628_B1_REV_ID 0x12 +#define BCM56628_B2_REV_ID 0x13 +#define BCM56629_DEVICE_ID 0xb629 +#define BCM56629_A0_REV_ID 1 +#define BCM56629_A1_REV_ID 2 +#define BCM56629_B0_REV_ID 0x11 +#define BCM56629_B1_REV_ID 0x12 +#define BCM56629_B2_REV_ID 0x13 + +#define BCM56680_DEVICE_ID 0xb680 +#define BCM56680_A0_REV_ID 1 +#define BCM56680_A1_REV_ID 2 +#define BCM56680_B0_REV_ID 0x11 +#define BCM56680_B1_REV_ID 0x12 +#define BCM56680_B2_REV_ID 0x13 +#define BCM56684_DEVICE_ID 0xb684 +#define BCM56684_A0_REV_ID 1 +#define BCM56684_A1_REV_ID 2 +#define BCM56684_B0_REV_ID 0x11 +#define BCM56684_B1_REV_ID 0x12 +#define BCM56684_B2_REV_ID 0x13 +#define BCM56686_DEVICE_ID 0xb686 +#define BCM56686_B0_REV_ID 0x11 +#define BCM56686_B1_REV_ID 0x12 +#define BCM56686_B2_REV_ID 0x13 + +#define BCM56820_DEVICE_ID 0xb820 +#define BCM56820_A0_REV_ID 1 +#define BCM56820_B0_REV_ID 0x11 +#define BCM56821_DEVICE_ID 0xb821 +#define BCM56821_A0_REV_ID 1 +#define BCM56821_B0_REV_ID 0x11 +#define BCM56822_DEVICE_ID 0xb822 +#define BCM56822_A0_REV_ID 1 +#define BCM56822_B0_REV_ID 0x11 +#define BCM56823_DEVICE_ID 0xb823 +#define BCM56823_A0_REV_ID 1 +#define BCM56823_B0_REV_ID 0x11 +#define BCM56825_DEVICE_ID 0xb825 +#define BCM56825_B0_REV_ID 0x11 + +#define BCM56720_DEVICE_ID 0xb720 +#define BCM56720_A0_REV_ID 1 +#define BCM56720_B0_REV_ID 0x11 +#define BCM56721_DEVICE_ID 0xb721 +#define BCM56721_A0_REV_ID 1 +#define BCM56721_B0_REV_ID 0x11 + +#define BCM56725_DEVICE_ID 0xb725 +#define BCM56725_A0_REV_ID 1 +#define BCM56725_B0_REV_ID 0x11 + +#define BCM56630_DEVICE_ID 0xb630 +#define BCM56630_A0_REV_ID 1 +#define BCM56630_B0_REV_ID 0x11 +#define BCM56634_DEVICE_ID 0xb634 +#define BCM56634_A0_REV_ID 1 +#define BCM56634_B0_REV_ID 0x11 +#define BCM56636_DEVICE_ID 0xb636 +#define BCM56636_A0_REV_ID 1 +#define BCM56636_B0_REV_ID 0x11 +#define BCM56638_DEVICE_ID 0xb638 +#define BCM56638_A0_REV_ID 1 +#define BCM56638_B0_REV_ID 0x11 +#define BCM56639_DEVICE_ID 0xb639 +#define BCM56639_A0_REV_ID 1 +#define BCM56639_B0_REV_ID 0x11 + +#define BCM56685_DEVICE_ID 0xb685 +#define BCM56685_A0_REV_ID 1 +#define BCM56685_B0_REV_ID 0x11 +#define BCM56689_DEVICE_ID 0xb689 +#define BCM56689_A0_REV_ID 1 +#define BCM56689_B0_REV_ID 0x11 + +#define BCM56520_DEVICE_ID 0xb520 +#define BCM56520_A0_REV_ID 1 +#define BCM56520_B0_REV_ID 0x11 +#define BCM56521_DEVICE_ID 0xb521 +#define BCM56521_A0_REV_ID 1 +#define BCM56521_B0_REV_ID 0x11 +#define BCM56522_DEVICE_ID 0xb522 +#define BCM56522_A0_REV_ID 1 +#define BCM56522_B0_REV_ID 0x11 +#define BCM56524_DEVICE_ID 0xb524 +#define BCM56524_A0_REV_ID 1 +#define BCM56524_B0_REV_ID 0x11 +#define BCM56526_DEVICE_ID 0xb526 +#define BCM56526_A0_REV_ID 1 +#define BCM56526_B0_REV_ID 0x11 + +#define BCM56534_DEVICE_ID 0xb534 +#define BCM56534_B0_REV_ID 0x11 +#define BCM56538_DEVICE_ID 0xb538 +#define BCM56538_B0_REV_ID 0x11 + +#define BCM56331_DEVICE_ID 0xb331 +#define BCM56331_A0_REV_ID 1 +#define BCM56331_B0_REV_ID 0x11 +#define BCM56331_B1_REV_ID 0x12 +#define BCM56333_DEVICE_ID 0xb333 +#define BCM56333_A0_REV_ID 1 +#define BCM56333_B0_REV_ID 0x11 +#define BCM56333_B1_REV_ID 0x12 +#define BCM56334_DEVICE_ID 0xb334 +#define BCM56334_A0_REV_ID 1 +#define BCM56334_B0_REV_ID 0x11 +#define BCM56334_B1_REV_ID 0x12 +#define BCM56338_DEVICE_ID 0xb338 +#define BCM56338_A0_REV_ID 1 +#define BCM56338_B0_REV_ID 0x11 +#define BCM56338_B1_REV_ID 0x12 + +#define BCM56320_DEVICE_ID 0xb320 +#define BCM56320_A0_REV_ID 1 +#define BCM56320_B0_REV_ID 0x11 +#define BCM56320_B1_REV_ID 0x12 +#define BCM56321_DEVICE_ID 0xb321 +#define BCM56321_A0_REV_ID 1 +#define BCM56321_B0_REV_ID 0x11 +#define BCM56321_B1_REV_ID 0x12 + + +#define BCM56548H_DEVICE_ID 0xB54A +#define BCM56548H_A0_REV_ID 1 +#define BCM56548_DEVICE_ID 0xb548 +#define BCM56548_A0_REV_ID 1 +#define BCM56547_DEVICE_ID 0xb547 +#define BCM56547_A0_REV_ID 1 + +#define BCM56346_DEVICE_ID 0xb346 +#define BCM56346_A0_REV_ID 1 +#define BCM56345_DEVICE_ID 0xb345 +#define BCM56345_A0_REV_ID 1 +#define BCM56344_DEVICE_ID 0xb344 +#define BCM56344_A0_REV_ID 1 +#define BCM56342_DEVICE_ID 0xb342 +#define BCM56342_A0_REV_ID 1 +#define BCM56340_DEVICE_ID 0xb340 +#define BCM56340_A0_REV_ID 1 + +#define BCM56049_DEVICE_ID 0xb049 +#define BCM56049_A0_REV_ID 1 +#define BCM56048_DEVICE_ID 0xb048 +#define BCM56048_A0_REV_ID 1 +#define BCM56047_DEVICE_ID 0xb047 +#define BCM56047_A0_REV_ID 1 + +#define BCM56042_DEVICE_ID 0xb042 +#define BCM56042_A0_REV_ID 1 +#define BCM56041_DEVICE_ID 0xb041 +#define BCM56041_A0_REV_ID 1 +#define BCM56040_DEVICE_ID 0xb040 +#define BCM56040_A0_REV_ID 1 + +#define BCM56132_DEVICE_ID 0xb132 +#define BCM56132_A0_REV_ID 1 +#define BCM56132_B0_REV_ID 0x11 +#define BCM56132_B1_REV_ID 0x12 +#define BCM56134_DEVICE_ID 0xb134 +#define BCM56134_A0_REV_ID 1 +#define BCM56134_B0_REV_ID 0x11 +#define BCM56134_B1_REV_ID 0x12 + +#define BCM56230_DEVICE_ID 0xb230 +#define BCM56230_B1_REV_ID 0x12 +#define BCM56231_DEVICE_ID 0xb231 +#define BCM56231_B1_REV_ID 0x12 + +#define BCM56140_DEVICE_ID 0xb140 +#define BCM56140_A0_REV_ID 1 +#define BCM56142_DEVICE_ID 0xb142 +#define BCM56142_A0_REV_ID 1 +#define BCM56143_DEVICE_ID 0xb143 +#define BCM56143_A0_REV_ID 1 +#define BCM56144_DEVICE_ID 0xb144 +#define BCM56144_A0_REV_ID 1 +#define BCM56146_DEVICE_ID 0xb146 +#define BCM56146_A0_REV_ID 1 +#define BCM56147_DEVICE_ID 0xb147 +#define BCM56147_A0_REV_ID 1 +#define BCM56149_DEVICE_ID 0xb149 +#define BCM56149_A0_REV_ID 1 + +#define BCM56840_DEVICE_ID 0xb840 +#define BCM56840_A0_REV_ID 1 +#define BCM56840_A1_REV_ID 2 +#define BCM56840_A2_REV_ID 3 +#define BCM56840_A3_REV_ID 4 +#define BCM56840_A4_REV_ID 5 +#define BCM56840_B0_REV_ID 0x11 +#define BCM56840_B1_REV_ID 0x12 +#define BCM56841_DEVICE_ID 0xb841 +#define BCM56841_A0_REV_ID 1 +#define BCM56841_A1_REV_ID 2 +#define BCM56841_A2_REV_ID 3 +#define BCM56841_A3_REV_ID 4 +#define BCM56841_A4_REV_ID 5 +#define BCM56841_B0_REV_ID 0x11 +#define BCM56841_B1_REV_ID 0x12 +#define BCM56843_DEVICE_ID 0xb843 +#define BCM56843_A0_REV_ID 1 +#define BCM56843_A1_REV_ID 2 +#define BCM56843_A2_REV_ID 3 +#define BCM56843_A3_REV_ID 4 +#define BCM56843_A4_REV_ID 5 +#define BCM56843_B0_REV_ID 0x11 +#define BCM56843_B1_REV_ID 0x12 +#define BCM56845_DEVICE_ID 0xb845 +#define BCM56845_A0_REV_ID 1 +#define BCM56845_A1_REV_ID 2 +#define BCM56845_A2_REV_ID 3 +#define BCM56845_A3_REV_ID 4 +#define BCM56845_A4_REV_ID 5 +#define BCM56845_B0_REV_ID 0x11 +#define BCM56845_B1_REV_ID 0x12 + +#define BCM56743_DEVICE_ID 0xb743 +#define BCM56743_A0_REV_ID 1 +#define BCM56743_A1_REV_ID 2 +#define BCM56743_A2_REV_ID 3 +#define BCM56743_A3_REV_ID 4 +#define BCM56743_A4_REV_ID 5 +#define BCM56743_B0_REV_ID 0x11 +#define BCM56743_B1_REV_ID 0x12 +#define BCM56745_DEVICE_ID 0xb745 +#define BCM56745_A0_REV_ID 1 +#define BCM56745_A1_REV_ID 2 +#define BCM56745_A2_REV_ID 3 +#define BCM56745_A3_REV_ID 4 +#define BCM56745_A4_REV_ID 5 +#define BCM56745_B0_REV_ID 0x11 +#define BCM56745_B1_REV_ID 0x12 + +#define BCM56260_DEVICE_ID 0xb260 +#define BCM56260_A0_REV_ID 1 +#define BCM56260_B0_REV_ID 0x11 +#define BCM56261_DEVICE_ID 0xb261 +#define BCM56261_A0_REV_ID 1 +#define BCM56261_B0_REV_ID 0x11 +#define BCM56262_DEVICE_ID 0xb262 +#define BCM56262_A0_REV_ID 1 +#define BCM56262_B0_REV_ID 0x11 +#define BCM56263_DEVICE_ID 0xb263 +#define BCM56263_A0_REV_ID 1 +#define BCM56263_B0_REV_ID 0x11 + +#define BCM56265_DEVICE_ID 0xb265 +#define BCM56265_A0_REV_ID 1 +#define BCM56265_B0_REV_ID 0x11 +#define BCM56266_DEVICE_ID 0xb266 +#define BCM56266_A0_REV_ID 1 +#define BCM56266_B0_REV_ID 0x11 +#define BCM56267_DEVICE_ID 0xb267 +#define BCM56267_A0_REV_ID 1 +#define BCM56267_B0_REV_ID 0x11 +#define BCM56268_DEVICE_ID 0xb268 +#define BCM56268_A0_REV_ID 1 +#define BCM56268_B0_REV_ID 0x11 + +#define BCM56233_DEVICE_ID 0xb233 +#define BCM56233_B0_REV_ID 0x11 + +#define BCM56460_DEVICE_ID 0xb460 +#define BCM56460_A0_REV_ID 1 +#define BCM56460_B0_REV_ID 0x11 +#define BCM56461_DEVICE_ID 0xb461 +#define BCM56461_A0_REV_ID 1 +#define BCM56461_B0_REV_ID 0x11 +#define BCM56462_DEVICE_ID 0xb462 +#define BCM56462_A0_REV_ID 1 +#define BCM56462_B0_REV_ID 0x11 +#define BCM56463_DEVICE_ID 0xb463 +#define BCM56463_A0_REV_ID 1 +#define BCM56463_B0_REV_ID 0x11 + +#define BCM56465_DEVICE_ID 0xb465 +#define BCM56465_A0_REV_ID 1 +#define BCM56465_B0_REV_ID 0x11 +#define BCM56466_DEVICE_ID 0xb466 +#define BCM56466_A0_REV_ID 1 +#define BCM56466_B0_REV_ID 0x11 +#define BCM56467_DEVICE_ID 0xb467 +#define BCM56467_A0_REV_ID 1 +#define BCM56467_B0_REV_ID 0x11 +#define BCM56468_DEVICE_ID 0xb468 +#define BCM56468_A0_REV_ID 1 +#define BCM56468_B0_REV_ID 0x11 + +#define BCM56270_DEVICE_ID 0xb270 +#define BCM56270_A0_REV_ID 1 +#define BCM56271_DEVICE_ID 0xb271 +#define BCM56271_A0_REV_ID 1 +#define BCM56272_DEVICE_ID 0xb272 +#define BCM56272_A0_REV_ID 1 + +#define BCM53460_DEVICE_ID 0x8460 +#define BCM53460_A0_REV_ID 1 +#define BCM53461_DEVICE_ID 0x8461 +#define BCM53461_A0_REV_ID 1 + +#define BCM56842_DEVICE_ID 0xb842 +#define BCM56842_A0_REV_ID 1 +#define BCM56842_A1_REV_ID 2 +#define BCM56844_DEVICE_ID 0xb844 +#define BCM56844_A0_REV_ID 1 +#define BCM56844_A1_REV_ID 2 +#define BCM56846_DEVICE_ID 0xb846 +#define BCM56846_A0_REV_ID 1 +#define BCM56846_A1_REV_ID 2 +#define BCM56549_DEVICE_ID 0xb549 +#define BCM56549_A0_REV_ID 1 +#define BCM56549_A1_REV_ID 2 +#define BCM56053_DEVICE_ID 0xb053 +#define BCM56053_A0_REV_ID 1 +#define BCM56053_A1_REV_ID 2 +#define BCM56831_DEVICE_ID 0xb831 +#define BCM56831_A0_REV_ID 1 +#define BCM56831_A1_REV_ID 2 +#define BCM56835_DEVICE_ID 0xb835 +#define BCM56835_A0_REV_ID 1 +#define BCM56835_A1_REV_ID 2 +#define BCM56838_DEVICE_ID 0xb838 +#define BCM56838_A0_REV_ID 1 +#define BCM56838_A1_REV_ID 2 +#define BCM56847_DEVICE_ID 0xb847 +#define BCM56847_A0_REV_ID 1 +#define BCM56847_A1_REV_ID 2 +#define BCM56847_A2_REV_ID 3 +#define BCM56847_A3_REV_ID 4 +#define BCM56847_A4_REV_ID 5 +#define BCM56847_B0_REV_ID 0x11 +#define BCM56847_B1_REV_ID 0x12 +#define BCM56849_DEVICE_ID 0xb849 +#define BCM56849_A0_REV_ID 1 +#define BCM56849_A1_REV_ID 2 + +#define BCM56742_DEVICE_ID 0xb742 +#define BCM56742_A0_REV_ID 1 +#define BCM56742_A1_REV_ID 2 +#define BCM56742_A2_REV_ID 3 +#define BCM56744_DEVICE_ID 0xb744 +#define BCM56744_A0_REV_ID 1 +#define BCM56744_A1_REV_ID 2 +#define BCM56746_DEVICE_ID 0xb746 +#define BCM56746_A0_REV_ID 1 +#define BCM56746_A1_REV_ID 2 + +#define BCM88230_DEVICE_ID 0x0230 +#define BCM88230_A0_REV_ID 1 +#define BCM88230_B0_REV_ID 0x11 +#define BCM88230_C0_REV_ID 0x21 +#define BCM88231_DEVICE_ID 0x0231 +#define BCM88231_A0_REV_ID 1 +#define BCM88231_B0_REV_ID 0x11 +#define BCM88231_C0_REV_ID 0x21 +#define BCM88235_DEVICE_ID 0x0235 +#define BCM88235_A0_REV_ID 1 +#define BCM88235_B0_REV_ID 0x11 +#define BCM88235_C0_REV_ID 0x21 +#define BCM88236_DEVICE_ID 0x0236 +#define BCM88236_A0_REV_ID 1 +#define BCM88236_B0_REV_ID 0x11 +#define BCM88236_C0_REV_ID 0x21 +#define BCM88239_DEVICE_ID 0x0239 +#define BCM88239_A0_REV_ID 1 +#define BCM88239_B0_REV_ID 0x11 +#define BCM88239_C0_REV_ID 0x21 +#define BCM56613_DEVICE_ID 0xb613 +#define BCM56613_A0_REV_ID 1 +#define BCM56613_B0_REV_ID 0x11 +#define BCM56613_C0_REV_ID 0x21 + +#define BCM88732_DEVICE_ID 0x0732 +#define BCM88732_A0_REV_ID 1 +#define BCM88732_A1_REV_ID 2 +#define BCM88732_A2_REV_ID 4 +#define BCM88732_B0_REV_ID 0x11 +#define BCM88732_B1_REV_ID 0x12 +#define BCM88732_B2_REV_ID 0x13 + +#define BCM56640_DEVICE_ID 0xb640 +#define BCM56640_A0_REV_ID 1 +#define BCM56640_A1_REV_ID 2 +#define BCM56640_B0_REV_ID 0x11 +#define BCM56643_DEVICE_ID 0xb643 +#define BCM56643_A0_REV_ID 1 +#define BCM56643_A1_REV_ID 2 +#define BCM56643_B0_REV_ID 0x11 +#define BCM56644_DEVICE_ID 0xb644 +#define BCM56644_A0_REV_ID 1 +#define BCM56644_A1_REV_ID 2 +#define BCM56644_B0_REV_ID 0x11 +#define BCM56648_DEVICE_ID 0xb648 +#define BCM56648_A0_REV_ID 1 +#define BCM56648_A1_REV_ID 2 +#define BCM56648_B0_REV_ID 0x11 +#define BCM56649_DEVICE_ID 0xb649 +#define BCM56649_A0_REV_ID 1 +#define BCM56649_A1_REV_ID 2 +#define BCM56649_B0_REV_ID 0x11 + +#define BCM56540_DEVICE_ID 0xb540 +#define BCM56540_A0_REV_ID 1 +#define BCM56540_A1_REV_ID 2 +#define BCM56540_B0_REV_ID 0x11 +#define BCM56541_DEVICE_ID 0xb541 +#define BCM56541_A0_REV_ID 1 +#define BCM56541_A1_REV_ID 2 +#define BCM56541_B0_REV_ID 0x11 +#define BCM56542_DEVICE_ID 0xb542 +#define BCM56542_A0_REV_ID 1 +#define BCM56542_A1_REV_ID 2 +#define BCM56542_B0_REV_ID 0x11 +#define BCM56543_DEVICE_ID 0xb543 +#define BCM56543_A0_REV_ID 1 +#define BCM56543_A1_REV_ID 2 +#define BCM56543_B0_REV_ID 0x11 +#define BCM56544_DEVICE_ID 0xb544 +#define BCM56544_A0_REV_ID 1 +#define BCM56544_A1_REV_ID 2 +#define BCM56544_B0_REV_ID 0x11 + +#define BCM56545_DEVICE_ID 0xb545 +#define BCM56545_A0_REV_ID 1 +#define BCM56545_A1_REV_ID 2 +#define BCM56545_B0_REV_ID 0x11 +#define BCM56546_DEVICE_ID 0xb546 +#define BCM56546_A0_REV_ID 1 +#define BCM56546_A1_REV_ID 2 +#define BCM56546_B0_REV_ID 0x11 + +#define BCM56044_DEVICE_ID 0xb044 +#define BCM56044_B0_REV_ID 0x11 +#define BCM56045_DEVICE_ID 0xb045 +#define BCM56045_A0_REV_ID 1 +#define BCM56045_A1_REV_ID 2 +#define BCM56045_B0_REV_ID 0x11 +#define BCM56046_DEVICE_ID 0xb046 +#define BCM56046_A0_REV_ID 1 +#define BCM56046_A1_REV_ID 2 +#define BCM56046_B0_REV_ID 0x11 + + +#define BCM56440_DEVICE_ID 0xb440 +#define BCM56440_A0_REV_ID 1 +#define BCM56440_B0_REV_ID 0x11 +#define BCM56441_DEVICE_ID 0xb441 +#define BCM56441_A0_REV_ID 1 +#define BCM56441_B0_REV_ID 0x11 +#define BCM56442_DEVICE_ID 0xb442 +#define BCM56442_A0_REV_ID 1 +#define BCM56442_B0_REV_ID 0x11 +#define BCM56443_DEVICE_ID 0xb443 +#define BCM56443_A0_REV_ID 1 +#define BCM56443_B0_REV_ID 0x11 +#define BCM56445_DEVICE_ID 0xb445 +#define BCM56445_A0_REV_ID 1 +#define BCM56445_B0_REV_ID 0x11 +#define BCM56446_DEVICE_ID 0xb446 +#define BCM56446_A0_REV_ID 1 +#define BCM56446_B0_REV_ID 0x11 +#define BCM56447_DEVICE_ID 0xb447 +#define BCM56447_A0_REV_ID 1 +#define BCM56447_B0_REV_ID 0x11 +#define BCM56448_DEVICE_ID 0xb448 +#define BCM56448_A0_REV_ID 1 +#define BCM56448_B0_REV_ID 0x11 +#define BCM56449_DEVICE_ID 0xb449 +#define BCM56449_A0_REV_ID 1 +#define BCM56449_B0_REV_ID 0x11 +#define BCM56240_DEVICE_ID 0xb240 +#define BCM56240_A0_REV_ID 1 +#define BCM56240_B0_REV_ID 0x11 +#define BCM56241_DEVICE_ID 0xb241 +#define BCM56241_A0_REV_ID 1 +#define BCM56241_B0_REV_ID 0x11 +#define BCM56242_DEVICE_ID 0xb242 +#define BCM56242_A0_REV_ID 1 +#define BCM56242_B0_REV_ID 0x11 +#define BCM56243_DEVICE_ID 0xb243 +#define BCM56243_A0_REV_ID 1 +#define BCM56243_B0_REV_ID 0x11 +#define BCM56245_DEVICE_ID 0xb245 +#define BCM56245_A0_REV_ID 1 +#define BCM56245_B0_REV_ID 0x11 +#define BCM56246_DEVICE_ID 0xb246 +#define BCM56246_A0_REV_ID 1 +#define BCM56246_B0_REV_ID 0x11 +#define BCM55440_DEVICE_ID 0xa440 +#define BCM55440_A0_REV_ID 1 +#define BCM55440_B0_REV_ID 0x11 +#define BCM55441_DEVICE_ID 0xa441 +#define BCM55441_A0_REV_ID 1 +#define BCM55441_B0_REV_ID 0x11 + +#define BCM55450_DEVICE_ID 0xa450 +#define BCM55450_A0_REV_ID 1 +#define BCM55450_B0_REV_ID 0x11 +#define BCM55450_B1_REV_ID 0x12 + +#define BCM55455_DEVICE_ID 0xa455 +#define BCM55455_A0_REV_ID 1 +#define BCM55455_B0_REV_ID 0x11 +#define BCM55455_B1_REV_ID 0x12 + +#define BCM56248_DEVICE_ID 0xb248 +#define BCM56248_A0_REV_ID 1 +#define BCM56248_B0_REV_ID 0x11 +#define BCM56248_B1_REV_ID 0x12 + +#define BCM56450_DEVICE_ID 0xb450 +#define BCM56450_A0_REV_ID 1 +#define BCM56450_B0_REV_ID 0x11 +#define BCM56450_B1_REV_ID 0x12 + +#define BCM56452_DEVICE_ID 0xb452 +#define BCM56452_A0_REV_ID 1 +#define BCM56452_B0_REV_ID 0x11 +#define BCM56452_B1_REV_ID 0x12 + +#define BCM56454_DEVICE_ID 0xb454 +#define BCM56454_A0_REV_ID 1 +#define BCM56454_B0_REV_ID 0x11 +#define BCM56454_B1_REV_ID 0x12 + +#define BCM56455_DEVICE_ID 0xb455 +#define BCM56455_A0_REV_ID 1 +#define BCM56455_B0_REV_ID 0x11 +#define BCM56455_B1_REV_ID 0x12 + +#define BCM56456_DEVICE_ID 0xb456 +#define BCM56456_A0_REV_ID 1 +#define BCM56456_B0_REV_ID 0x11 +#define BCM56456_B1_REV_ID 0x12 + +#define BCM56457_DEVICE_ID 0xb457 +#define BCM56457_A0_REV_ID 1 +#define BCM56457_B0_REV_ID 0x11 +#define BCM56457_B1_REV_ID 0x12 + +#define BCM56458_DEVICE_ID 0xb458 +#define BCM56458_A0_REV_ID 1 +#define BCM56458_B0_REV_ID 0x11 +#define BCM56458_B1_REV_ID 0x12 + +#define BCM56850_DEVICE_ID 0xb850 +#define BCM56850_A0_REV_ID 1 +#define BCM56850_A1_REV_ID 2 +#define BCM56850_A2_REV_ID 3 +#define BCM56851_DEVICE_ID 0xb851 +#define BCM56851_A0_REV_ID 1 +#define BCM56851_A1_REV_ID 2 +#define BCM56851_A2_REV_ID 3 +#define BCM56852_DEVICE_ID 0xb852 +#define BCM56852_A0_REV_ID 1 +#define BCM56852_A1_REV_ID 2 +#define BCM56852_A2_REV_ID 3 +#define BCM56853_DEVICE_ID 0xb853 +#define BCM56853_A0_REV_ID 1 +#define BCM56853_A1_REV_ID 2 +#define BCM56853_A2_REV_ID 3 +#define BCM56854_DEVICE_ID 0xb854 +#define BCM56854_A0_REV_ID 1 +#define BCM56854_A1_REV_ID 2 +#define BCM56854_A2_REV_ID 3 +#define BCM56855_DEVICE_ID 0xb855 +#define BCM56855_A0_REV_ID 1 +#define BCM56855_A1_REV_ID 2 +#define BCM56855_A2_REV_ID 3 +#define BCM56834_DEVICE_ID 0xb834 +#define BCM56834_A0_REV_ID 1 +#define BCM56834_A1_REV_ID 2 +#define BCM56834_A2_REV_ID 3 + +#define BCM56860_DEVICE_ID 0xb860 +#define BCM56860_A0_REV_ID 1 +#define BCM56860_A1_REV_ID 2 +#define BCM56861_DEVICE_ID 0xb861 +#define BCM56861_A0_REV_ID 1 +#define BCM56861_A1_REV_ID 2 +#define BCM56862_DEVICE_ID 0xb862 +#define BCM56862_A0_REV_ID 1 +#define BCM56862_A1_REV_ID 2 +#define BCM56864_DEVICE_ID 0xb864 +#define BCM56864_A0_REV_ID 1 +#define BCM56864_A1_REV_ID 2 +#define BCM56865_DEVICE_ID 0xb865 +#define BCM56865_A0_REV_ID 1 +#define BCM56865_A1_REV_ID 2 +#define BCM56866_DEVICE_ID 0xb866 +#define BCM56866_A0_REV_ID 1 +#define BCM56866_A1_REV_ID 2 +#define BCM56867_DEVICE_ID 0xb867 +#define BCM56867_A0_REV_ID 1 +#define BCM56867_A1_REV_ID 2 +#define BCM56868_DEVICE_ID 0xb868 +#define BCM56868_A0_REV_ID 1 +#define BCM56868_A1_REV_ID 2 +#define BCM56832_DEVICE_ID 0xb832 +#define BCM56832_A0_REV_ID 1 +#define BCM56832_A1_REV_ID 2 +#define BCM56833_DEVICE_ID 0xb833 +#define BCM56833_A0_REV_ID 1 +#define BCM56833_A1_REV_ID 2 +#define BCM56836_DEVICE_ID 0xb836 +#define BCM56836_A0_REV_ID 1 +#define BCM56836_A1_REV_ID 2 + + +#define BCM56750_DEVICE_ID 0xb750 +#define BCM56750_A0_REV_ID 1 +#define BCM56750_A1_REV_ID 2 +#define BCM56750_A2_REV_ID 3 + +#define BCM56830_DEVICE_ID 0xb830 +#define BCM56830_A0_REV_ID 1 +#define BCM56830_A1_REV_ID 2 +#define BCM56830_A2_REV_ID 3 + +#define BCM56150_DEVICE_ID 0xb150 +#define BCM56150_A0_REV_ID 1 +#define BCM56151_DEVICE_ID 0xb151 +#define BCM56151_A0_REV_ID 1 +#define BCM56152_DEVICE_ID 0xb152 +#define BCM56152_A0_REV_ID 1 + +#define BCM53342_DEVICE_ID 0x8342 +#define BCM53342_A0_REV_ID 1 +#define BCM53343_DEVICE_ID 0x8343 +#define BCM53343_A0_REV_ID 1 +#define BCM53344_DEVICE_ID 0x8344 +#define BCM53344_A0_REV_ID 1 +#define BCM53346_DEVICE_ID 0x8346 +#define BCM53346_A0_REV_ID 1 +#define BCM53347_DEVICE_ID 0x8347 +#define BCM53347_A0_REV_ID 1 + +#define BCM53333_DEVICE_ID 0x8333 +#define BCM53333_A0_REV_ID 1 +#define BCM53334_DEVICE_ID 0x8334 +#define BCM53334_A0_REV_ID 1 + +#define BCM53393_DEVICE_ID 0x8393 +#define BCM53393_A0_REV_ID 1 +#define BCM53394_DEVICE_ID 0x8394 +#define BCM53394_A0_REV_ID 1 + +#define BCM53400_DEVICE_ID 0x8400 +#define BCM53400_A0_REV_ID 1 +#define BCM56060_DEVICE_ID 0xb060 +#define BCM56060_A0_REV_ID 1 +#define BCM56062_DEVICE_ID 0xb062 +#define BCM56062_A0_REV_ID 1 +#define BCM56063_DEVICE_ID 0xb063 +#define BCM56063_A0_REV_ID 1 +#define BCM56064_DEVICE_ID 0xb064 +#define BCM56064_A0_REV_ID 1 +#define BCM56065_DEVICE_ID 0xb065 +#define BCM56065_A0_REV_ID 1 +#define BCM56066_DEVICE_ID 0xb066 +#define BCM56066_A0_REV_ID 1 +#define BCM53401_DEVICE_ID 0x8401 +#define BCM53411_DEVICE_ID 0x8411 +#define BCM53401_A0_REV_ID 1 +#define BCM53402_DEVICE_ID 0x8402 +#define BCM53412_DEVICE_ID 0x8412 +#define BCM53402_A0_REV_ID 1 +#define BCM53403_DEVICE_ID 0x8403 +#define BCM53413_DEVICE_ID 0x8413 +#define BCM53403_A0_REV_ID 1 +#define BCM53404_DEVICE_ID 0x8404 +#define BCM53414_DEVICE_ID 0x8414 +#define BCM53404_A0_REV_ID 1 +#define BCM53405_DEVICE_ID 0x8405 +#define BCM53415_DEVICE_ID 0x8415 +#define BCM53405_A0_REV_ID 1 +#define BCM53406_DEVICE_ID 0x8406 +#define BCM53416_DEVICE_ID 0x8416 +#define BCM53406_A0_REV_ID 1 +#define BCM53408_DEVICE_ID 0x8408 +#define BCM53418_DEVICE_ID 0x8418 +#define BCM53408_A0_REV_ID 1 +#define BCM53365_DEVICE_ID 0x8365 +#define BCM53365_A0_REV_ID 1 +#define BCM53369_DEVICE_ID 0x8369 +#define BCM53369_A0_REV_ID 1 + +#define BCM53454_DEVICE_ID 0x8454 +#define BCM53455_DEVICE_ID 0x8455 +#define BCM53454_A0_REV_ID 1 +#define BCM53456_DEVICE_ID 0x8456 +#define BCM53457_DEVICE_ID 0x8457 +#define BCM53456_A0_REV_ID 1 + +#define BCM53422_DEVICE_ID 0x8422 +#define BCM53422_A0_REV_ID 1 +#define BCM53424_DEVICE_ID 0x8424 +#define BCM53424_A0_REV_ID 1 +#define BCM53426_DEVICE_ID 0x8426 +#define BCM53426_A0_REV_ID 1 + +#define BCM56960_DEVICE_ID 0xb960 +#define BCM56960_A0_REV_ID 1 +#define BCM56960_B0_REV_ID 0x11 +#define BCM56960_B1_REV_ID 0x12 +#define BCM56961_DEVICE_ID 0xb961 +#define BCM56961_A0_REV_ID 1 +#define BCM56961_B0_REV_ID 0x11 +#define BCM56961_B1_REV_ID 0x12 +#define BCM56962_DEVICE_ID 0xb962 +#define BCM56962_A0_REV_ID 1 +#define BCM56962_B0_REV_ID 0x11 +#define BCM56962_B1_REV_ID 0x12 +#define BCM56963_DEVICE_ID 0xb963 +#define BCM56963_A0_REV_ID 1 +#define BCM56963_B0_REV_ID 0x11 +#define BCM56963_B1_REV_ID 0x12 +#define BCM56930_DEVICE_ID 0xb930 +#define BCM56930_A0_REV_ID 1 +#define BCM56930_B0_REV_ID 0x11 +#define BCM56930_B1_REV_ID 0x12 +#define BCM56930_C0_REV_ID 0x21 +#define BCM56931_DEVICE_ID 0xb931 +#define BCM56931_A0_REV_ID 1 +#define BCM56931_B0_REV_ID 0x11 +#define BCM56931_C0_REV_ID 0x21 +#define BCM56935_DEVICE_ID 0xb935 +#define BCM56935_A0_REV_ID 1 +#define BCM56935_B0_REV_ID 0x11 +#define BCM56935_C0_REV_ID 0x21 +#define BCM56936_DEVICE_ID 0xb936 +#define BCM56936_A0_REV_ID 1 +#define BCM56936_B0_REV_ID 0x11 +#define BCM56936_C0_REV_ID 0x21 +#define BCM56939_DEVICE_ID 0xb939 +#define BCM56939_A0_REV_ID 1 +#define BCM56939_B0_REV_ID 0x11 +#define BCM56939_C0_REV_ID 0x21 + +#define BCM56168_DEVICE_ID 0xb168 +#define BCM56168_A0_REV_ID 1 +#define BCM56168_B0_REV_ID 0x11 +#define BCM56168_B1_REV_ID 0x12 +#define BCM56169_DEVICE_ID 0xb169 +#define BCM56169_A0_REV_ID 1 +#define BCM56169_B0_REV_ID 0x11 +#define BCM56169_B1_REV_ID 0x12 + +#define BCM56968_DEVICE_ID 0xb968 +#define BCM56968_A0_REV_ID 1 +#define BCM56968_B0_REV_ID 0x11 +#define BCM56968_B1_REV_ID 0x12 + +#define BCM56160_DEVICE_ID 0xb160 +#define BCM56160_A0_REV_ID 1 +#define BCM56160_B0_REV_ID 0x11 +#define BCM56162_DEVICE_ID 0xb162 +#define BCM56162_A0_REV_ID 1 +#define BCM56162_B0_REV_ID 0x11 + +#define BCM56163_DEVICE_ID 0xb163 +#define BCM56163_A0_REV_ID 1 +#define BCM56163_B0_REV_ID 0x11 +#define BCM56164_DEVICE_ID 0xb164 +#define BCM56164_A0_REV_ID 1 +#define BCM56164_B0_REV_ID 0x11 +#define BCM56166_DEVICE_ID 0xb166 +#define BCM56166_A0_REV_ID 1 +#define BCM56166_B0_REV_ID 0x11 + +#define BCM53440_DEVICE_ID 0x8440 +#define BCM53440_A0_REV_ID 1 +#define BCM53440_B0_REV_ID 0x11 +#define BCM53442_DEVICE_ID 0x8442 +#define BCM53442_A0_REV_ID 1 +#define BCM53442_B0_REV_ID 0x11 +#define BCM53443_DEVICE_ID 0x8443 +#define BCM53443_A0_REV_ID 1 +#define BCM53443_B0_REV_ID 0x11 + +#define BCM53434_DEVICE_ID 0x8434 +#define BCM53434_A0_REV_ID 1 +#define BCM53434_B0_REV_ID 0x11 + +#define BCM56560_DEVICE_ID 0xb560 +#define BCM56560_A0_REV_ID 1 +#define BCM56560_B0_REV_ID 0x11 +#define BCM56560_B1_REV_ID 0x12 + +#define BCM56561_DEVICE_ID 0xb561 +#define BCM56561_A0_REV_ID 1 +#define BCM56561_B0_REV_ID 0x11 +#define BCM56561_B1_REV_ID 0x12 + +#define BCM56562_DEVICE_ID 0xb562 +#define BCM56562_A0_REV_ID 1 +#define BCM56562_B0_REV_ID 0x11 +#define BCM56562_B1_REV_ID 0x12 + +#define BCM56565_DEVICE_ID 0xb565 +#define BCM56565_A0_REV_ID 1 +#define BCM56565_B0_REV_ID 0x11 +#define BCM56565_B1_REV_ID 0x12 + +#define BCM56566_DEVICE_ID 0xb566 +#define BCM56566_A0_REV_ID 1 +#define BCM56566_B0_REV_ID 0x11 +#define BCM56566_B1_REV_ID 0x12 + +#define BCM56567_DEVICE_ID 0xb567 +#define BCM56567_A0_REV_ID 1 +#define BCM56567_B0_REV_ID 0x11 +#define BCM56567_B1_REV_ID 0x12 + +#define BCM56568_DEVICE_ID 0xb568 +#define BCM56568_A0_REV_ID 1 +#define BCM56568_B0_REV_ID 0x11 +#define BCM56568_B1_REV_ID 0x12 + +#define BCM56760_DEVICE_ID 0xb760 +#define BCM56760_A0_REV_ID 1 +#define BCM56760_A1_REV_ID 2 +#define BCM56760_B0_REV_ID 0x11 +#define BCM56760_B1_REV_ID 0x12 + +#define BCM56762_DEVICE_ID 0xb762 +#define BCM56762_A0_REV_ID 1 +#define BCM56762_B0_REV_ID 0x11 +#define BCM56762_B1_REV_ID 0x12 + +#define BCM56764_DEVICE_ID 0xb764 +#define BCM56764_A0_REV_ID 1 +#define BCM56764_B0_REV_ID 0x11 +#define BCM56764_B1_REV_ID 0x12 + +#define BCM56765_DEVICE_ID 0xb765 +#define BCM56765_A0_REV_ID 1 +#define BCM56765_B0_REV_ID 0x11 +#define BCM56765_B1_REV_ID 0x12 + +#define BCM56766_DEVICE_ID 0xb766 +#define BCM56766_A0_REV_ID 1 +#define BCM56766_B0_REV_ID 0x11 +#define BCM56766_B1_REV_ID 0x12 + +#define BCM56768_DEVICE_ID 0xb768 +#define BCM56768_A0_REV_ID 1 +#define BCM56768_B0_REV_ID 0x11 +#define BCM56768_B1_REV_ID 0x12 + +#define BCM56068_DEVICE_ID 0xb068 +#define BCM56068_A0_REV_ID 1 +#define BCM56068_B0_REV_ID 0x11 +#define BCM56068_B1_REV_ID 0x12 + +#define BCM56069_DEVICE_ID 0xb069 +#define BCM56069_A0_REV_ID 1 +#define BCM56069_B0_REV_ID 0x11 +#define BCM56069_B1_REV_ID 0x12 + +#define BCM56170_DEVICE_ID 0xb170 +#define BCM56170_A0_REV_ID 1 +#define BCM56172_DEVICE_ID 0xb172 +#define BCM56172_A0_REV_ID 1 +#define BCM56174_DEVICE_ID 0xb174 +#define BCM56174_A0_REV_ID 1 + +#define BCM53570_DEVICE_ID 0x8570 +#define BCM53570_A0_REV_ID 1 +#define BCM53575_DEVICE_ID 0x8575 +#define BCM53575_A0_REV_ID 1 + + +#define BCM56965_DEVICE_ID 0xb965 +#define BCM56965_A0_REV_ID 1 +#define BCM56965_A1_REV_ID 2 +#define BCM56969_DEVICE_ID 0xb969 +#define BCM56969_A0_REV_ID 1 +#define BCM56966_DEVICE_ID 0xb966 +#define BCM56966_A0_REV_ID 1 +#define BCM56967_DEVICE_ID 0xb967 +#define BCM56967_A0_REV_ID 1 + +#define BCM56970_DEVICE_ID 0xb970 +#define BCM56970_A0_REV_ID 1 +#define BCM56970_B0_REV_ID 0x11 +#define BCM56971_DEVICE_ID 0xb971 +#define BCM56971_A0_REV_ID 1 +#define BCM56971_B0_REV_ID 0x11 +#define BCM56972_DEVICE_ID 0xb972 +#define BCM56972_A0_REV_ID 1 +#define BCM56972_B0_REV_ID 0x11 +#define BCM56974_DEVICE_ID 0xb974 +#define BCM56974_A0_REV_ID 1 +#define BCM56974_B0_REV_ID 0x11 + + +#define BCM56870_DEVICE_ID 0xb870 +#define BCM56870_A0_REV_ID 1 +#define BCM56873_DEVICE_ID 0xb873 +#define BCM56873_A0_REV_ID 1 + +#define BCM5665_DEVICE_ID 0x5665 +#define BCM5665_A0_REV_ID 1 +#define BCM5665_B0_REV_ID 0x11 + + +#define BCM5655_DEVICE_ID 0x5655 +#define BCM5655_A0_REV_ID 1 +#define BCM5655_B0_REV_ID 0x11 + + +#define BCM5650_DEVICE_ID 0x5650 +#define BCM5650_A0_REV_ID 1 +#define BCM5650_B0_REV_ID 0x11 +#define BCM5650_C0_REV_ID 0x21 + +#define BROADCOM_PHYID_HIGH 0x0040 + +#define BCM5338_PHYID_LOW 0x62b0 +#define BCM5338_A0_REV_ID 0 +#define BCM5338_A1_REV_ID 1 +#define BCM5338_B0_REV_ID 3 + +#define BCM5324_PHYID_LOW 0xbc20 +#define BCM5324_PHYID_HIGH 0x143 +#define BCM5324_A1_PHYID_HIGH 0x153 +#define BCM5324_DEVICE_ID 0xbc20 +#define BCM5324_A0_REV_ID 0 +#define BCM5324_A1_REV_ID 1 +#define BCM5324_A2_REV_ID 2 + +#define BCM5380_PHYID_LOW 0x6250 +#define BCM5380_A0_REV_ID 0 + +#define BCM5388_PHYID_LOW 0x6288 +#define BCM5388_A0_REV_ID 0 + +#define BCM5396_PHYID_LOW 0xbd70 +#define BCM5396_PHYID_HIGH 0x143 +#define BCM5396_DEVICE_ID 0x96 +#define BCM5396_A0_REV_ID 0 + +#define BCM5389_PHYID_LOW 0xbd70 +#define BCM5389_PHYID_HIGH 0x143 +#define BCM5389_DEVICE_ID 0x89 +#define BCM5389_A0_REV_ID 0 +#define BCM5389_A1_DEVICE_ID 0x86 +#define BCM5389_A1_REV_ID 1 + +#define BCM5398_PHYID_LOW 0xbcd0 +#define BCM5398_PHYID_HIGH 0x0143 +#define BCM5398_DEVICE_ID 0x98 +#define BCM5398_A0_REV_ID 0 + +#define BCM5325_PHYID_LOW 0xbc30 +#define BCM5325_PHYID_HIGH 0x143 +#define BCM5325_DEVICE_ID 0xbc30 +#define BCM5325_A0_REV_ID 0 +#define BCM5325_A1_REV_ID 1 + +#define BCM5348_PHYID_LOW 0xbe40 +#define BCM5348_PHYID_HIGH 0x0143 +#define BCM5348_DEVICE_ID 0x48 +#define BCM5348_A0_REV_ID 0 +#define BCM5348_A1_REV_ID 1 + +#define BCM5397_PHYID_LOW 0xbcd0 +#define BCM5397_PHYID_HIGH 0x0143 +#define BCM5397_DEVICE_ID 0x97 +#define BCM5397_A0_REV_ID 0 + +#define BCM5347_PHYID_LOW 0xbe40 +#define BCM5347_PHYID_HIGH 0x0143 +#define BCM5347_DEVICE_ID 0x47 +#define BCM5347_A0_REV_ID 0 + +#define BCM5395_PHYID_LOW 0xbcf0 +#define BCM5395_PHYID_HIGH 0x0143 +#define BCM5395_DEVICE_ID 0xbcf0 +#define BCM5395_A0_REV_ID 0 + +#define BCM53242_PHYID_LOW 0xbf10 +#define BCM53242_PHYID_HIGH 0x0143 +#define BCM53242_DEVICE_ID 0xbf10 +#define BCM53242_A0_REV_ID 0 +#define BCM53242_B0_REV_ID 4 +#define BCM53242_B1_REV_ID 5 + +#define BCM53262_PHYID_LOW 0xbf20 +#define BCM53262_PHYID_HIGH 0x0143 +#define BCM53262_DEVICE_ID 0xbf20 +#define BCM53262_A0_REV_ID 0 +#define BCM53262_B0_REV_ID 4 +#define BCM53262_B1_REV_ID 5 + +#define BCM53115_PHYID_LOW 0xbf80 +#define BCM53115_PHYID_HIGH 0x0143 +#define BCM53115_DEVICE_ID 0xbf80 +#define BCM53115_A0_REV_ID 0 +#define BCM53115_A1_REV_ID 1 +#define BCM53115_B0_REV_ID 2 +#define BCM53115_B1_REV_ID 3 +#define BCM53115_C0_REV_ID 8 + +#define BCM53118_PHYID_LOW 0xbfe0 +#define BCM53118_PHYID_HIGH 0x0143 +#define BCM53118_DEVICE_ID 0xbfe0 +#define BCM53118_A0_REV_ID 0 + +#define BCM53118_B0_REV_ID 4 +#define BCM53118_B1_REV_ID 5 + +#define BCM53280_PHYID_LOW 0x5e90 +#define BCM53280_PHYID_HIGH 0x0362 +#define BCM53280_DEVICE_ID (0x4 | BCM53280_PHYID_LOW) +#define BCM53280_A0_REV_ID 0 +#define BCM53280_B0_REV_ID 0x4 +#define BCM53280_B1_REV_ID 0x5 +#define BCM53280_B2_REV_ID 0x6 +#define BCM53286_DEVICE_ID (0x4 | BCM53280_PHYID_LOW) +#define BCM53288_DEVICE_ID (0xc | BCM53280_PHYID_LOW) +#define BCM53284_DEVICE_ID (0x7 | BCM53280_PHYID_LOW) +#define BCM53283_DEVICE_ID (0x6 | BCM53280_PHYID_LOW) +#define BCM53282_DEVICE_ID (0x5 | BCM53280_PHYID_LOW) +#define BCM53101_PHYID_LOW 0x5ed0 +#define BCM53101_PHYID_HIGH 0x0362 +#define BCM53101_DEVICE_ID 0x5ed0 +#define BCM53101_A0_REV_ID 0 +#define BCM53101_B0_REV_ID 4 + +#define BCM53125_PHYID_LOW 0x5f20 +#define BCM53125_PHYID_HIGH 0x0362 +#define BCM53125_DEVICE_ID 0x5f20 +#define BCM53125_A0_REV_ID 0 +#define BCM53125_B0_REV_ID 0x4 +#define BCM53125_MODEL_ID 0x53125 + +#define BCM53134_PHYID_LOW 0x5350 +#define BCM53134_PHYID_HIGH 0xAE02 +#define BCM53134_DEVICE_ID 0x5350 +#define BCM53134_A0_REV_ID 0x0 +#define BCM53134_B0_REV_ID 0x1 +#define BCM53134_B1_REV_ID 0x2 +#define BCM53134_A0_MODEL_ID 0x5035 +#define BCM53134_B0_MODEL_ID 0x5075 + +#define BCM53128_PHYID_LOW 0x5e10 +#define BCM53128_PHYID_HIGH 0x0362 +#define BCM53128_DEVICE_ID 0x5e10 +#define BCM53128_A0_REV_ID 0 +#define BCM53128_B0_REV_ID 0x4 +#define BCM53128_MODEL_ID 0x53128 + +#define BCM53600_PHYID_LOW 0x5f40 +#define BCM53600_PHYID_HIGH 0x0362 +#define BCM53600_DEVICE_ID (0x3 | BCM53600_PHYID_LOW) +#define BCM53600_A0_REV_ID 0 +#define BCM53602_DEVICE_ID (0x1 | BCM53600_PHYID_LOW) +#define BCM53603_DEVICE_ID (0x2 | BCM53600_PHYID_LOW) +#define BCM53604_DEVICE_ID (0x3 | BCM53600_PHYID_LOW) +#define BCM53606_DEVICE_ID (0x7 | BCM53600_PHYID_LOW) + +#define BCM89500_PHYID_LOW 0x5d30 +#define BCM89500_PHYID_HIGH 0x0362 +#define BCM89500_DEVICE_ID 0x9500 +#define BCM89501_DEVICE_ID 0x9501 +#define BCM89200_DEVICE_ID 0x9200 +#define BCM89500_A0_REV_ID 0 +#define BCM89500_B0_REV_ID 0x4 +#define BCM89500_MODEL_ID 0x89500 + +#define BCM53010_PHYID_LOW 0x8760 +#define BCM53010_PHYID_HIGH 0x600d +#define BCM53010_DEVICE_ID 0x3010 +#define BCM53011_DEVICE_ID 0x3011 +#define BCM53012_DEVICE_ID 0x3012 +#define BCM53010_A0_REV_ID 0 +#define BCM53010_A2_REV_ID 0x2 +#define BCM53010_MODEL_ID 0x53010 + +#define BCM53018_PHYID_LOW 0x87c0 +#define BCM53018_PHYID_HIGH 0x600d +#define BCM53017_DEVICE_ID 0x3016 +#define BCM53018_DEVICE_ID 0x3018 +#define BCM53019_DEVICE_ID 0x3019 +#define BCM53018_A0_REV_ID 0 +#define BCM53018_MODEL_ID 0x53016 + +#define BCM53020_PHYID_LOW 0x87f0 +#define BCM53020_PHYID_HIGH 0x600d +#define BCM53020_DEVICE_ID 0x8022 +#define BCM53022_DEVICE_ID 0x8022 +#define BCM53023_DEVICE_ID 0x8023 +#define BCM53025_DEVICE_ID 0x8025 +#define BCM58625_DEVICE_ID 0x8625 +#define BCM58622_DEVICE_ID 0x8622 +#define BCM58623_DEVICE_ID 0x8623 +#define BCM58525_DEVICE_ID 0x8525 +#define BCM58522_DEVICE_ID 0x8522 +#define BCM53020_A0_REV_ID 0 +#define BCM53020_MODEL_ID 0x3025 + +#define BCM4713_DEVICE_ID 0x4713 +#define BCM4713_A0_REV_ID 0 +#define BCM4713_A9_REV_ID 9 + +#define BCM53000_GMAC_DEVICE_ID 0x4715 +#define BCM53000_A0_REV_ID 0 + +#define BCM53010_GMAC_DEVICE_ID 0x4715 + +#define BCM53000PCIE_DEVICE_ID 0x5300 + +#define SANDBURST_VENDOR_ID 0x17ba +#define BME3200_DEVICE_ID 0x0280 +#define BME3200_A0_REV_ID 0x0000 +#define BME3200_B0_REV_ID 0x0001 +#define BM9600_DEVICE_ID 0x0480 +#define BM9600_A0_REV_ID 0x0000 +#define BM9600_B0_REV_ID 0x0010 +#define QE2000_DEVICE_ID 0x0300 +#define QE2000_A1_REV_ID 0x0001 +#define QE2000_A2_REV_ID 0x0002 +#define QE2000_A3_REV_ID 0x0003 +#define QE2000_A4_REV_ID 0x0004 +#define BCM88020_DEVICE_ID 0x0380 +#define BCM88020_A0_REV_ID 0x0000 +#define BCM88020_A1_REV_ID 0x0001 +#define BCM88020_A2_REV_ID 0x0002 +#define BCM88025_DEVICE_ID 0x0580 +#define BCM88025_A0_REV_ID 0x0000 +#define BCM88030_DEVICE_ID 0x0038 +#define BCM88030_A0_REV_ID 0x0001 +#define BCM88030_A1_REV_ID 0x0002 +#define BCM88030_B0_REV_ID 0x0011 +#define BCM88030_B1_REV_ID 0x0012 +#define BCM88034_DEVICE_ID 0x0034 +#define BCM88034_A0_REV_ID (BCM88030_A0_REV_ID) +#define BCM88034_A1_REV_ID (BCM88030_A1_REV_ID) +#define BCM88034_B0_REV_ID (BCM88030_B0_REV_ID) +#define BCM88034_B1_REV_ID (BCM88030_B1_REV_ID) +#define BCM88039_DEVICE_ID 0x0039 +#define BCM88039_A0_REV_ID (BCM88030_A0_REV_ID) +#define BCM88039_A1_REV_ID (BCM88030_A1_REV_ID) +#define BCM88039_B0_REV_ID (BCM88030_B0_REV_ID) +#define BCM88039_B1_REV_ID (BCM88030_B1_REV_ID) +#define BCM88130_DEVICE_ID 0x0480 +#define BCM88130_A0_REV_ID 0x0000 +#define BCM88130_A1_REV_ID 0x0001 +#define BCM88130_B0_REV_ID 0x0010 +#define PLX_VENDOR_ID 0x10b5 +#define PLX9656_DEVICE_ID 0x9656 +#define PLX9656_REV_ID 0x0000 +#define PLX9056_DEVICE_ID 0x9056 +#define PLX9056_REV_ID 0x0000 + +#define TK371X_DEVICE_ID 0x8600 +#define TK371X_A0_REV_ID 0x0 + +#define GEDI_DEVICE_ID 0xa100 +#define GEDI_REV_ID 0x0001 +#define ARAD_DEVICE_ID 0x8650 +#define ARAD_A0_REV_ID 0x0000 +#define ARAD_B0_REV_ID 0x0011 +#define ARAD_B1_REV_ID 0x0012 +#define BCM88650_DEVICE_ID ARAD_DEVICE_ID +#define BCM88650_A0_REV_ID ARAD_A0_REV_ID +#define BCM88650_B0_REV_ID ARAD_B0_REV_ID +#define BCM88650_B1_REV_ID ARAD_B1_REV_ID +#define BCM88750_DEVICE_ID 0x8750 +#define BCM88750_A0_REV_ID 0x0000 +#define BCM88750_B0_REV_ID 0x0011 +#define BCM88753_DEVICE_ID 0x8753 +#define BCM88753_A0_REV_ID 0x0000 +#define BCM88753_B0_REV_ID 0x0011 +#define BCM88754_DEVICE_ID 0x8754 +#define BCM88754_A0_REV_ID 0x0000 +#define BCM88754_ORIGINAL_VENDOR_ID 0x16FC +#define BCM88754_ORIGINAL_DEVICE_ID 0x020F +#define BCM88754_A0_ORIGINAL_REV_ID 0x0001 +#define BCM88755_DEVICE_ID 0x8755 +#define BCM88755_B0_REV_ID 0x0011 +#define BCM88770_DEVICE_ID 0x8770 +#define BCM88770_A1_REV_ID 0x0002 +#define BCM88773_DEVICE_ID 0x8773 +#define BCM88773_A1_REV_ID 0x0002 +#define BCM88774_DEVICE_ID 0x8774 +#define BCM88774_A1_REV_ID 0x0002 +#define BCM88775_DEVICE_ID 0x8775 +#define BCM88775_A1_REV_ID 0x0002 +#define BCM88776_DEVICE_ID 0x8776 +#define BCM88776_A1_REV_ID 0x0002 +#define BCM88777_DEVICE_ID 0x8777 +#define BCM88777_A1_REV_ID 0x0002 +#define BCM88950_DEVICE_ID 0x8950 +#define BCM88950_A0_REV_ID 0x0001 +#define BCM88950_A1_REV_ID 0x0002 +#define BCM88953_DEVICE_ID 0x8953 +#define BCM88953_A1_REV_ID 0x0002 +#define BCM88954_DEVICE_ID 0x8954 +#define BCM88954_A1_REV_ID 0x0002 +#define BCM88955_DEVICE_ID 0x8955 +#define BCM88955_A1_REV_ID 0x0002 +#define BCM88956_DEVICE_ID 0x8956 +#define BCM88956_A1_REV_ID 0x0002 +#define BCM88790_DEVICE_ID 0x8790 +#define BCM88790_A0_REV_ID 0x0001 +#define ARADPLUS_DEVICE_ID 0x8660 +#define ARADPLUS_A0_REV_ID 0x0001 +#define BCM88660_DEVICE_ID ARADPLUS_DEVICE_ID +#define BCM88660_A0_REV_ID ARADPLUS_A0_REV_ID +#define JERICHO_DEVICE_ID 0x8675 +#define JERICHO_A0_REV_ID 0x0001 +#define JERICHO_B0_REV_ID 0x0011 +#define JERICHO_A1_REV_ID 0x0002 +#define BCM88670_DEVICE_ID 0x8670 +#define BCM88670_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88670_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88671_DEVICE_ID 0x8671 +#define BCM88671_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88671_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88671M_DEVICE_ID 0x867A +#define BCM88671M_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88671M_A1_REV_ID JERICHO_A1_REV_ID + +#define BCM88670_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88671_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88671M_B0_REV_ID JERICHO_B0_REV_ID + +#define BCM88672_DEVICE_ID 0x8672 +#define BCM88672_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88672_A1_REV_ID JERICHO_A1_REV_ID + +#define BCM88672_B0_REV_ID JERICHO_B0_REV_ID + +#define BCM88673_DEVICE_ID 0x8673 +#define BCM88673_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88673_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88674_DEVICE_ID 0x8674 +#define BCM88674_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88674_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88675_DEVICE_ID JERICHO_DEVICE_ID +#define BCM88675_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88675_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88675M_DEVICE_ID 0x867B +#define BCM88675M_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88675M_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88676_DEVICE_ID 0x8676 +#define BCM88676_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88676_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88676M_DEVICE_ID 0x867C +#define BCM88676M_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88676M_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88677_DEVICE_ID 0x8677 +#define BCM88677_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88677_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88678_DEVICE_ID 0x8678 +#define BCM88678_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88678_A1_REV_ID JERICHO_A1_REV_ID +#define BCM88679_DEVICE_ID 0x8679 +#define BCM88679_A0_REV_ID JERICHO_A0_REV_ID +#define BCM88679_A1_REV_ID JERICHO_A1_REV_ID + +#define BCM88673_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88674_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88675_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88675M_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88676_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88676M_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88677_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88678_B0_REV_ID JERICHO_B0_REV_ID +#define BCM88679_B0_REV_ID JERICHO_B0_REV_ID +#define QMX_DEVICE_ID 0x8375 +#define QMX_A0_REV_ID 0x0001 +#define QMX_B0_REV_ID 0x0011 +#define QMX_A1_REV_ID 0x0002 +#define BCM88370_DEVICE_ID 0x8370 +#define BCM88370_A0_REV_ID QMX_A0_REV_ID +#define BCM88370_A1_REV_ID QMX_A1_REV_ID +#define BCM88371_DEVICE_ID 0x8371 +#define BCM88371_A0_REV_ID QMX_A0_REV_ID +#define BCM88371_A1_REV_ID QMX_A1_REV_ID +#define BCM88371M_DEVICE_ID 0x837A +#define BCM88371M_A0_REV_ID QMX_A0_REV_ID +#define BCM88371M_A1_REV_ID QMX_A1_REV_ID +#define BCM88375_DEVICE_ID QMX_DEVICE_ID +#define BCM88375_A0_REV_ID QMX_A0_REV_ID +#define BCM88375_A1_REV_ID QMX_A1_REV_ID +#define BCM88376_DEVICE_ID 0x8376 +#define BCM88376_A0_REV_ID QMX_A0_REV_ID +#define BCM88376_A1_REV_ID QMX_A1_REV_ID +#define BCM88376M_DEVICE_ID 0x837B +#define BCM88376M_A0_REV_ID QMX_A0_REV_ID +#define BCM88376M_A1_REV_ID QMX_A1_REV_ID +#define BCM88377_DEVICE_ID 0x8377 +#define BCM88377_A0_REV_ID QMX_A0_REV_ID +#define BCM88377_A1_REV_ID QMX_A1_REV_ID +#define BCM88378_DEVICE_ID 0x8378 +#define BCM88378_A0_REV_ID QMX_A0_REV_ID +#define BCM88378_A1_REV_ID QMX_A1_REV_ID +#define BCM88379_DEVICE_ID 0x8379 +#define BCM88379_A0_REV_ID QMX_A0_REV_ID +#define BCM88379_A1_REV_ID QMX_A1_REV_ID + +#define BCM88370_B0_REV_ID QMX_B0_REV_ID +#define BCM88371_B0_REV_ID QMX_B0_REV_ID +#define BCM88371M_B0_REV_ID QMX_B0_REV_ID +#define BCM88375_B0_REV_ID QMX_B0_REV_ID +#define BCM88376_B0_REV_ID QMX_B0_REV_ID +#define BCM88376M_B0_REV_ID QMX_B0_REV_ID +#define BCM88377_B0_REV_ID QMX_B0_REV_ID +#define BCM88378_B0_REV_ID QMX_B0_REV_ID +#define BCM88379_B0_REV_ID QMX_B0_REV_ID + + +#define JERICHO_PLUS_DEVICE_ID 0x8680 +#define JERICHO_PLUS_A0_REV_ID 0x0001 +#define BCM88680_DEVICE_ID JERICHO_PLUS_DEVICE_ID +#define BCM88680_A0_REV_ID JERICHO_PLUS_A0_REV_ID +#define BCM88680_A1_REV_ID 0x0002 + + +#define BCM88681_DEVICE_ID 0x8681 +#define BCM88681_A0_REV_ID JERICHO_PLUS_A0_REV_ID + +#define BCM88682_DEVICE_ID 0x8682 +#define BCM88682_A0_REV_ID JERICHO_PLUS_A0_REV_ID + +#define BCM88683_DEVICE_ID 0x8683 +#define BCM88683_A0_REV_ID JERICHO_PLUS_A0_REV_ID + +#define BCM88684_DEVICE_ID 0x8684 +#define BCM88684_A0_REV_ID JERICHO_PLUS_A0_REV_ID + +#define BCM88685_DEVICE_ID 0x8685 +#define BCM88685_A0_REV_ID JERICHO_PLUS_A0_REV_ID + +#define BCM88380_DEVICE_ID 0x8380 +#define BCM88380_A0_REV_ID JERICHO_PLUS_A0_REV_ID +#define BCM88381_DEVICE_ID 0x8381 +#define BCM88381_A0_REV_ID JERICHO_PLUS_A0_REV_ID + +#define JERICHO_2_DEVICE_ID 0x8690 +#define JERICHO_2_A0_REV_ID 0x0001 +#define BCM88690_DEVICE_ID JERICHO_2_DEVICE_ID +#define BCM88690_A0_REV_ID JERICHO_2_A0_REV_ID + +#define QAX_DEVICE_ID 0x8470 +#define QAX_A0_REV_ID 0x0001 +#define QAX_B0_REV_ID 0x0011 +#define BCM88470_DEVICE_ID QAX_DEVICE_ID +#define BCM88470_B0_REV_ID QAX_B0_REV_ID +#define BCM88470P_DEVICE_ID 0x847C +#define BCM88471_DEVICE_ID 0x8471 +#define BCM88473_DEVICE_ID 0x8473 +#define BCM88474_DEVICE_ID 0x8474 +#define BCM88474H_DEVICE_ID 0x847B +#define BCM88476_DEVICE_ID 0x8476 +#define BCM88477_DEVICE_ID 0x8477 + + + + +#define BCM88470_A0_REV_ID QAX_A0_REV_ID + +#define QUX_DEVICE_ID 0x8270 +#define QUX_A0_REV_ID 0x0001 +#define QUX_A1_REV_ID 0x0002 +#define QUX_B0_REV_ID 0x0011 +#define BCM88270_DEVICE_ID QUX_DEVICE_ID +#define BCM88270_A0_REV_ID QUX_A0_REV_ID +#define BCM88270_A1_REV_ID QUX_A1_REV_ID +#define BCM88272_DEVICE_ID 0x8272 +#define BCM88273_DEVICE_ID 0x8273 +#define BCM88278_DEVICE_ID 0x8278 + +#define FLAIR_DEVICE_ID 0xF000 +#define FLAIR_A0_REV_ID 0x0001 +#define BCM8206_DEVICE_ID FLAIR_DEVICE_ID +#define BCM8206_A0_REV_ID FLAIR_A0_REV_ID + +#define ARDON_DEVICE_ID 0x8202 +#define ARDON_A0_REV_ID 0x0000 +#define BCM88202_DEVICE_ID ARDON_DEVICE_ID +#define BCM88202_A0_REV_ID ARDON_A0_REV_ID +#define ARDON_A1_REV_ID 0x0001 +#define BCM88202_A1_REV_ID ARDON_A1_REV_ID +#define ARDON_A2_REV_ID 0x0002 +#define BCM88202_A2_REV_ID ARDON_A2_REV_ID +#define BCM2801PM_DEVICE_ID 0x2801 +#define BCM2801PM_A0_REV_ID 0x0000 +#define BCM88360_DEVICE_ID 0x8360 +#define BCM88360_A0_REV_ID ARADPLUS_A0_REV_ID +#define BCM88361_DEVICE_ID 0x8361 +#define BCM88361_A0_REV_ID ARADPLUS_A0_REV_ID +#define BCM88363_DEVICE_ID 0x8363 +#define BCM88363_A0_REV_ID ARADPLUS_A0_REV_ID +#define BCM88460_DEVICE_ID 0x8460 +#define BCM88460_A0_REV_ID ARADPLUS_A0_REV_ID +#define BCM88461_DEVICE_ID 0x8461 +#define BCM88461_A0_REV_ID ARADPLUS_A0_REV_ID +#define BCM88560_DEVICE_ID 0x8560 +#define BCM88560_A0_REV_ID ARADPLUS_A0_REV_ID +#define BCM88561_DEVICE_ID 0x8561 +#define BCM88561_A0_REV_ID ARADPLUS_A0_REV_ID +#define BCM88562_DEVICE_ID 0x8562 +#define BCM88562_A0_REV_ID ARADPLUS_A0_REV_ID +#define BCM88661_DEVICE_ID 0x8661 +#define BCM88661_A0_REV_ID ARADPLUS_A0_REV_ID +#define BCM88664_DEVICE_ID 0x8664 +#define BCM88664_A0_REV_ID ARADPLUS_A0_REV_ID + + +#define BCM88350_DEVICE_ID 0x8350 +#define BCM88350_B1_REV_ID ARAD_B1_REV_ID +#define BCM88351_DEVICE_ID 0x8351 +#define BCM88351_B1_REV_ID ARAD_B1_REV_ID +#define BCM88450_DEVICE_ID 0x8450 +#define BCM88450_B1_REV_ID ARAD_B1_REV_ID +#define BCM88451_DEVICE_ID 0x8451 +#define BCM88451_B1_REV_ID ARAD_B1_REV_ID +#define BCM88550_DEVICE_ID 0x8550 +#define BCM88550_B1_REV_ID ARAD_B0_REV_ID +#define BCM88551_DEVICE_ID 0x8551 +#define BCM88551_B1_REV_ID ARAD_B1_REV_ID +#define BCM88552_DEVICE_ID 0x8552 +#define BCM88552_B1_REV_ID ARAD_B1_REV_ID +#define BCM88651_DEVICE_ID 0x8651 +#define BCM88651_B1_REV_ID ARAD_B1_REV_ID +#define BCM88654_DEVICE_ID 0x8654 +#define BCM88654_B1_REV_ID ARAD_B1_REV_ID + +#define BCM88772_DEVICE_ID 0x8772 +#define BCM88952_DEVICE_ID 0x8952 +#define BCM88772_A1_REV_ID 0x0002 +#define BCM88952_A0_REV_ID 0x0001 +#define BCM88952_A1_REV_ID 0x0002 + +#define BCM88752_DEVICE_ID 0x8752 +#define BCM88752_A0_REV_ID 0x0000 +#define BCM88752_B0_REV_ID 0x0011 + + +#define BCM83207_DEVICE_ID 0x3207 +#define BCM83208_DEVICE_ID 0x3208 +#define BCM83207_A0_REV_ID 0x0001 +#define BCM83208_A0_REV_ID 1 + +#define PCP_PCI_VENDOR_ID 0x1172 +#define PCP_PCI_DEVICE_ID 0x4 + +#define ACP_PCI_VENDOR_ID 0x10ee +#define ACP_PCI_DEVICE_ID 0x7011 +#define ACP_PCI_REV_ID 0x0001 +#endif + diff --git a/platform/broadcom/saibcm-modules/make/Make.config b/platform/broadcom/saibcm-modules/make/Make.config new file mode 100644 index 000000000000..d3f83c24c3f0 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Make.config @@ -0,0 +1,364 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Make.config,v 1.3 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# + +ifneq ($(strip $(override-target)),) +override TARGET=$(override-target) +endif + +export TARGET + +# +# Set up the target name, and the target base variables. +# +# target = The full name of the target such as vxworks-bmw +# targetbase = 1st part of target (e.g. vxworks) +# targetplat = 2nd part of target (e.g. x86) if any; otherwise same as 1st +# +target = ${TARGET} +targetsplt = $(subst -, , ${target}) # change hyphens to spaces +targetbase = $(word 1,${targetsplt}) +targetplat = $(subst ${targetbase}-,,${TARGET}) + +# +# Common configuration for all platforms +# (Additional platform-dependent configurations are in Makefile.xxx) +# + +# +# THIS FILE SHOULD NOT BE MODIFIED LOCALLY, to override, add a file +# $SDK/make/Make.local that sets your local settings, and/or provide +# a path to your settings using the MAKE_LOCAL variable. If +# either of these files exists, their values will override those in this makefile. +# +ifdef MAKE_LOCAL +-include ${MAKE_LOCAL} +endif + +-include ${SDK}/make/Make.local + +ifdef ALL_CHIPS + ROBO_CHIPS = 1 + ESW_CHIPS = 1 +else + ifndef ROBO_CHIPS + ESW_CHIPS = 1 + endif +endif # ALL_CHIPS + +# +# By default, turn off the "changing directory" message. +# +MAKEFLAGS += --no-print-directory + +# +# Use gmake by default +# + +include ${SDK}/make/Make.tools +include ${SDK}/make/Makefile.${target} + +# use QUIET=1 to control printing of compilation lines +ifdef QUIET +Q:=@ +else +Q:= +endif + +# +# Suffix to add to the "target" files to allow local builds with different +# flags. Set "target_suffix" to XXX to cause the build to put built objects +# in ${target}${target_suffix}. This allows things like building a debug +# version with different flags. This may also be set in another Makefile. +# + +#target_suffix := + +# +# Optional suffix to add to the build directory and output binary files +# to allow multiple builds to co-exist for various reasons. +# +#chip_suffix := -$(shell echo $(CHIP) | tr A-Z a-z) + +# +# Combined suffixes +# +all_suffix = ${chip_suffix}${target_suffix} + +# +# Default location to place binaries and make depend files for building +# purposes. +# +ifeq "$(HOSTTYPE)" "Windows2000PC" +BLDROOTWITHDRIVE = ${SDK}/build/${target}${all_suffix}${bldroot_suffix} +BLDROOT = ${SDK_NO_DRIVE_NAME}/build/${target}${all_suffix}${bldroot_suffix} +else # ifeq "$(HOSTTYPE)" "Windows2000PC" + +ifndef SDKBUILD +SDKBUILD :=build +endif + +BLDROOT = ${SDK}/${SDKBUILD}/$(if ${BLDCONFIG},${BLDCONFIG}/)${target}${all_suffix}${bldroot_suffix} + +endif # ifeq "$(HOSTTYPE)" "Windows2000PC" + +# This is needed because we cannot include Make.vxworks before Make.config +ifndef DEST_DIR_SUFFIX +export DEST_DIR_SUFFIX :=$(subst $(realpath $(SDK))/systems,,$(realpath $(CURDIR)/$(dir ($(firstword $(MAKEFILE_LIST)))))) +ifeq ($(MAKELEVEL),0) +endif +endif + +ifeq ($(DEST_DIR),) +export DEST_DIR :=${SDK}/${SDKBUILD}$(if ${BLDCONFIG},/${BLDCONFIG})$(DEST_DIR_SUFFIX) +endif + +ifdef LOCALDIR +BLDDIR = ${BLDROOT}/${LOCALDIR} +ifeq "$(HOSTTYPE)" "Windows2000PC" +BLDDIRWITHDRIVE = ${BLDROOTWITHDRIVE}/${LOCALDIR} +endif +else # ifdef LOCALDIR +BLDDIR = ${BLDROOT} +ifeq "$(HOSTTYPE)" "Windows2000PC" +BLDDIRWITHDRIVE = ${BLDROOTWITHDRIVE} +endif +endif # ifdef LOCALDIR + +LIBDIR = ${BLDROOT} + +# +# Export directory, where build objects used by the outside world are +# placed (exported header files, libs, bins) +# +EXPDIR = ${SDK}/export/${target}${all_suffix} + +# +# Standard include paths +# +INCDIR = ${SDK}/include + +# +# Compilation Flags +# +# Flags may be added to (see below) +# + +INCFLAGS = -I${INCDIR} -I${SDK}/systems + +CFLAGS += ${INCFLAGS} +CXXFLAGS += ${INCFLAGS} +CPPFLAGS += ${INCFLAGS} + +# +# Debug #ifdef control +# +# Compiling out #ifdef DEBUG code saves about 1.3% on executable size. +# It is recommended to leave debug enabled when developing applications. +# +ifndef DEBUG_IFDEFS +DEBUG_IFDEFS=TRUE +endif + +ifeq ($(DEBUG_IFDEFS),TRUE) +CFLAGS += -DBROADCOM_DEBUG +CXXFLAGS += -DBROADCOM_DEBUG +CPPFLAGS += -DBROADCOM_DEBUG +endif + +# +# Debug symbol information control +# +ifndef DEBUG_SYMBOLS +DEBUG_SYMBOLS=TRUE +endif + +ifeq ($(DEBUG_SYMBOLS),TRUE) +CFLAGS += -g +CXXFLAGS += -g +CPPFLAGS += -g +endif + +# +# If DEBUG_CFLAGS is set, add its contents to CFLAGS. +# May be useful for setting on the command line or adding to Make.local. +# Example: gmake DEBUG_CFLAGS=-save-temps system.c +# + +ifneq ($(DEBUG_CFLAGS),) +CFLAGS += $(DEBUG_CFLAGS) +CXXFLAGS += $(DEBUG_CFLAGS) +CPPFLAGS += $(DEBUG_CFLAGS) +endif + +# +# Optimization level +# +# Set DEBUG_OPTIMIZE to TRUE (default) to use a normal optimization +# determined by OPTFLAGS_DEFAULT in the platform Makefile. +# Set DEBUG_OPTIMIZE to FALSE to use no optimization, +# strongly recommended when using any debugger. +# Set DEBUG_OPTIMIZE to any other option string to request specific +# optimization flags (for example -O2). +# +ifndef DEBUG_OPTIMIZE +DEBUG_OPTIMIZE=TRUE +endif + +ifeq ($(DEBUG_OPTIMIZE),TRUE) +OPTFLAGS += $(OPTFLAGS_DEFAULT) +else +ifneq ($(DEBUG_OPTIMIZE),FALSE) +OPTFLAGS += $(DEBUG_OPTIMIZE) +endif +endif + +# +# Debug assertion control. +# +# Compiling out assert() saves about 1.1% on executable size, +# however doing so is VERY MUCH discouraged. +# +ifndef DEBUG_ASSERTS +DEBUG_ASSERTS=TRUE +endif + +ifeq ($(DEBUG_ASSERTS),FALSE) +CFLAGS += -DNDEBUG +CXXFLAGS += -DNDEBUG +CPPFLAGS += -DNDEBUG +endif + +# +# GCC pedantic mode. +# +ifeq ($(DEBUG_PEDANTIC),TRUE) +CFGFLAGS += -D__PEDANTIC__ +CFLAGS += --pedantic +CXXFLAGS += --pedantic +endif + +# +# In each directory, build a list of local sources, objects, and headers +# +LSRCS = $(wildcard *.c *.cpp *.s *.cc *.C) +LOBJS = $(addsuffix .o, $(basename ${LSRCS})) +BOBJS = $(addprefix ${BLDDIR}/,${LOBJS}) +LHDRS = $(wildcard *.h *.H) +LDOTIS = $(wildcard *.i) + + +# +# Rule to create object file (build) directory +# + +.PHONY: all install clean distclean + +.PRECIOUS: ${BLDDIR}/.tree + +%/.tree: + @$(ECHO) 'Creating build directory $(dir $@)' + @$(MKDIR) $(dir $@) + @$(ECHO) "Build Directory for ${LOCALDIR} Created" > $@ + +# Rule allowing build through CPP only, creates .E file from .c file. + +%.E: %.c + $Q${CC} -E ${CFLAGS} $< | sed -e '/^ *$$/d' -e p -e d > $@ + +# Rule allowing build through source only, creates .s file from .c file. + +%.s: %.c + $Q${CC} -S ${CFLAGS} $< + +# +# Default Build rules for .c --> .o, leaving the binary in BLDDIR/X.o, +# even if file not built from directory of source. +# +ifeq ($(FAST),1) +${BLDDIR}/%.o: %.c +else +ifdef GENERATE_C_FILES +${BLDDIR}/%.o: %.c +else +${BLDDIR}/%.o: %.c +endif +endif +ifdef QUIET + @${ECHO} Compiling ${LOCALDIR}/$< +endif +ifdef LOCAL_D_FILE + $Q$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -o $@ -c $< --write-user-dependencies + -@/bin/cp $*.d $(BLDDIR)/$*.d + -@/bin/rm -f $*.d +else + $Q$(CC) -MD -MF $(BLDDIR)/$*.d $(CFLAGS) $(EXTRA_CFLAGS) -o $@ -c $< +endif + @/bin/cp $(BLDDIR)/$*.d $(BLDDIR)/$*.tmp;\ + /bin/sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \ + -e '/^$$/ d' -e 's/$$/ :/' \ + < $(BLDDIR)/$*.d >> $(BLDDIR)/$*.tmp; \ + /bin/sed \ + -e 's| \([0-9a-zA-Z]\)| '$(SDK)/$(LOCALDIR)'\/\1|g' \ + -e 's|^\([0-9a-zA-Z]\)|'$(SDK)/$(LOCALDIR)'/\1|g' \ + -e 's| \(\.\.\/\)| '$(SDK)/$(LOCALDIR)'\/\1|g' \ + -e 's|'$(SDK)'|'$$\{SDK\}'|g' \ + -e 's/\w*\/\.\.\/*//g' \ + -e 's/\w*\/\.\.\/*//g' \ + -e 's/\w*\/\.\.\/*//g' \ + < $(BLDDIR)/$*.tmp > $(BLDDIR)/$*.P; \ + /bin/rm -f $(BLDDIR)/$*.d $(BLDDIR)/$*.tmp + +${BLDDIR}/%.o: %.s +ifdef QUIET + @${ECHO} Assembling ${LOCALDIR}/$< +endif + $Q${CC} ${CFLAGS} ${EXTRA_CFLAGS} -c $< -o $@ + +${BLDDIR}/%.o: %.cpp +ifdef QUIET + @${ECHO} Compiling ${LOCALDIR}/$< +endif + $Q${CXX} -c ${CXXFLAGS} -c $< -o $@ + +${BLDDIR}/%.o: %.cc ${BLDDIR}/.tree +ifdef QUIET + @${ECHO} Compiling ${LOCALDIR}/$< +endif + $Q${CXX} -c ${CXXFLAGS} -c $< -o $@ + +# +# Cause "make foo.o" in any subdirectory to put the object in the build +# directory instead of the local directory. +# +%.o: ${BLDDIR}/%.o + @ + +# +# List of directories where built objects live. +# (we are not making the export directories for now) +# +#DIRS = ${BLDDIR} ${EXPDIR}/lib ${EXPDIR}/bin ${EXPDIR}/include +DIRS = ${BLDDIR} + +ifeq (C_COMPILER,$(MAKECMDGOALS)) +C_COMPILER: + @echo $(CC) +endif diff --git a/platform/broadcom/saibcm-modules/make/Make.depend b/platform/broadcom/saibcm-modules/make/Make.depend new file mode 100644 index 000000000000..3d8b8c59d938 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Make.depend @@ -0,0 +1,109 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Make.depend,v 1.14 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +# Default rule to build dependencies. This builds a x.d file for each +# x.c file that describes the dependencies. We then conditionally include +# the generated .d files. +# + +# +# If making 'clean', do not include any .d files. If they are included, +# gmake intrinsically tries to remake them all. +# +ifeq (,$(findstring clean,$(MAKECMDGOALS))) + +ZFS :=$(wildcard *.zf) +ZFC := $(ZFS:.zf=.c) + +ifdef GENERATE_C_FILES +ifndef GEN_INCS +$(error "GEN_INCS was not defined") +endif + +ZF_GEN = ${SDK}/tools/zFrameCodeGen.pl + +# 1=.zf +define ZFS_RULE +$(1:.zf=Console.c) : $(1:.zf=.c) + @echo updated $$@ from $$? + +$(1:.zf=.c) : $(1) $(ZF_GEN) + @$(PERL) $(ZF_GEN) -s -z . -p . -g $1 -t c + @echo generated ${LOCALDIR}/$$@ from $(1) + @mv $$(*F).cx $$@ + @if [ -e $$(*F)Console.cx ] ; then \ + mv $$(*F)Console.cx $$(*F)Console.c; \ + echo Created $$(*F)Console.c ;\ + fi + @if [ -e $$(*F)Console.hx ] ; then \ + echo Created $(GEN_INCS)/$$(*F)Console.hx ;\ + mv $$(*F)Console.hx $(GEN_INCS)/ ; \ + fi + @mv $$(*F).hx $(GEN_INCS)/ +endef + +$(foreach zf,$(ZFS),$(eval $(call ZFS_RULE,$(zf)))) + +${BLDDIR}/%.P : ${BLDDIR}/.tree %.c + +.PHONY: GENFILES +GENFILES: $(ZFC) + +$(BOBJS) : $(ZFC) + +else +# +# Attempt to build the depend files. If it fails, the depend file is +# removed so that it is not included in later builds. +# +${BLDDIR}/%.P : %.c ${BLDDIR}/.tree + @$(ECHO) Dependencies for ${LOCALDIR}/$< + +${BLDDIR}/%.P : %.cc ${BLDDIR}/.tree + @$(ECHO) Dependencies for ${LOCALDIR}/$< + +endif + +# +# If there are C or C++ files in this directory, include the +# depend files for them. +# + +ifeq ($(findstring _COMPILER,$(MAKECMDGOALS))$(findstring variable,$(MAKECMDGOALS)),) +ifneq ($(strip ${LSRCS}),) +ifneq (,$(findstring .o,$(MAKECMDGOALS))) +-include $(addprefix ${BLDDIR}/,$(MAKECMDGOALS:.o=.P)) $(addprefix ${BLDDIR}/,$(MAKECMDGOALS:.o=.sig)) +else +-include $(addprefix ${BLDDIR}/,$(addsuffix .P,$(basename $(LSRCS)))) $(addprefix ${BLDDIR}/,$(addsuffix .sig,$(basename $(LSRCS)))) +endif +endif +endif + +endif # !CLEANING + +clean_d:: +ifdef QUIET + @$(ECHO) Cleaning dependencies for ${LOCALDIR} +endif +ifdef GENERATE_C_FILES + $Q$(RM) $(ZFC:%=$(SDK)/$(LOCALDIR)/%) $(ZFC:%.c=$(SDK)/$(LOCALDIR)/%Console.c) +endif + +clean:: clean_d diff --git a/platform/broadcom/saibcm-modules/make/Make.kernlib b/platform/broadcom/saibcm-modules/make/Make.kernlib new file mode 100644 index 000000000000..612b7e3479aa --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Make.kernlib @@ -0,0 +1,70 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Make.kernlib,v 1.7 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +# Make rules/targets for handling libraries + +.SECONDARY:: ${BOBJS} + +targetlibsoname = ${lib}.so.${SHAREDLIBVER} +targetlibrealname = ${targetlibsoname} +targetlibso = ${LIBDIR}/${targetlibrealname} + +ifeq ($(TOOLS),Borland) + +LIBSUFFIX=lib + +${LIBDIR}/%.lib: ${BORLAND_BOBJS} + $(RM) $@ + $(FOREACH) -subdir "$(LIBDIR)" \ + "tlib $@ $(foreach obj, $(BORLAND_LOBJS), +-$(obj))" + +else # !Borland + +LIBSUFFIX=a + +${LIBDIR}/%.a: ${BOBJS} +ifdef QUIET + @$(ECHO) Building library $(notdir $@) +endif + $Q$(RM) $@ + $Q$(AR) ${ARFLAGS} $@ $(sort ${BOBJS}) +ifeq ($(LINUX_MAKE_SHARED_LIB),1) +ifeq ($(targetbase),unix) + $(CC) -shared -Wl,-soname,${targetlibsoname} -o ${targetlibso} ${BOBJS} -lc +endif +endif # LINUX_MAKE_SHARED_LIB # +endif # !Borland + +targetlib = ${LIBDIR}/${lib}.${LIBSUFFIX} + +all:: ${BLDDIR}/.tree ${targetlib} + +install:: all + +clean:: +ifdef QUIET + @$(ECHO) Cleaning objects for ${LOCALDIR} and ${lib} +endif + $Q$(RM) ${BOBJS} + $Q$(RM) ${targetlib} + $Q$(RM) ${targetlibso} + +distclean:: clean + diff --git a/platform/broadcom/saibcm-modules/make/Make.lib b/platform/broadcom/saibcm-modules/make/Make.lib new file mode 100644 index 000000000000..992a24e6955c --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Make.lib @@ -0,0 +1,81 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Make.lib,v 1.14 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +# Make rules/targets for handling libraries + +.SECONDARY:: ${BOBJS} + +BOBJS_FAST = ${BOBJS} +BOBJS_MAKE_CMD = + +ifeq ($(FAST),1) + ifneq ($(strip $(BOBJS)),) + BOBJS_FAST = + BOBJS_ARGS = -j9 + BOBJS_MAKE_CMD = pwd && make LSRUN=$(SDK)/tools/lsrun.pl $(BOBJS_ARGS) ${BOBJS} + endif +endif + +ifeq ($(TOOLS),Borland) + +LIBSUFFIX=lib + +${LIBDIR}/%.lib: ${BORLAND_BOBJS} + $(RM) $@ + $(FOREACH) -subdir "$(LIBDIR)" \ + "tlib $@ $(foreach obj, $(BORLAND_LOBJS), +-$(obj))" + +else # !Borland + +ifeq ($(LINUX_MAKE_SHARED_LIB),1) +LIBSUFFIX=so.${SHAREDLIBVER} +else +LIBSUFFIX=a +endif + +targetlib = ${LIBDIR}/${lib}.${LIBSUFFIX} + +all:: ${BLDDIR}/.tree ${targetlib} + +${LIBDIR}/%.${LIBSUFFIX}: ${BOBJS_FAST} + $(BOBJS_MAKE_CMD) +ifdef QUIET + @$(ECHO) Building library $(notdir $@) +endif + $Q$(RM) $@ +ifeq ($(LINUX_MAKE_SHARED_LIB),1) + $(CC) -shared -Wl,-soname,${lib}.${LIBSUFFIX}${EXTRA_LIB_LDFLAGS} -o ${targetlib} ${BOBJS} -lc +else + ${Q}cd $(dir $(word 1,${BOBJS}));$(AR) ${ARFLAGS} $@ $(sort $(notdir ${BOBJS})) +endif + +endif # !Borland + + +install:: all + +clean:: +ifdef QUIET + @$(ECHO) Cleaning objects for ${LOCALDIR} and ${lib} +endif + $Q$(RM) ${BOBJS} + $Q$(RM) ${targetlib} + +distclean:: clean diff --git a/platform/broadcom/saibcm-modules/make/Make.linux b/platform/broadcom/saibcm-modules/make/Make.linux new file mode 100644 index 000000000000..18a6547bc660 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Make.linux @@ -0,0 +1,98 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# +# $Id: Make.linux,v 1.18 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +# Common make targets for Linux user and kernel builds included by top +# level Linux makefiles +# +# Variables referenced: +# +# LINUX_MAKE_FLAGS +# Additional flags passed to Make +# +# LINUX_MAKE_USER +# Defined: user build +# Undefined: kernel build +# +# LINUX_MAKE_DIR +# Common makefile location, if it is not ../common +# +# + +export DEST_DIR_SUFFIX :=$(subst $(realpath $(SDK))/systems,,$(realpath $(CURDIR)/$(dir ($(firstword $(MAKEFILE_LIST)))))) + +ifeq (,$(kernel_version)) +kernel_version=2_4 +endif + +ifndef LINUX_MAKE_SHARED_LIB +LINUX_MAKE_SHARED_LIB=0 +endif + +ifeq (,$(SHAREDLIBVER)) +SHAREDLIBVER=1 +endif + +ifndef LINUX_MAKE_DIR +ifdef LINUX_MAKE_USER +LINUX_MAKE_DIR := $(SDK)/systems/linux/user/common +else +LINUX_MAKE_DIR := $(SDK)/systems/linux/kernel/common +endif +endif + +ifdef LINUX_MAKE_USER + CMD = $(LINUX_MAKE_FLAGS) -C $(LINUX_MAKE_DIR) \ + platform=$(platform) bldroot_suffix=/$(platform) kernel_version=$(kernel_version) \ + LINUX_MAKE_SHARED_LIB=$(LINUX_MAKE_SHARED_LIB) SHAREDLIBVER=$(SHAREDLIBVER) +else + export LINUX_MAKE_KERNEL := 1 + CMD = $(LINUX_MAKE_FLAGS) -C $(LINUX_MAKE_DIR) \ + platform=$(platform) kernel_version=$(kernel_version) +endif + +ifneq (,$(MIPS_TOOLS_DIR)) + CMD += MIPS_TOOLS_DIR=$(MIPS_TOOLS_DIR) +endif + +ifneq (,$(MIPS_CROSS_COMPILE)) + CMD += MIPS_CROSS_COMPILE=$(MIPS_CROSS_COMPILE) +endif + +ifneq (,$(LINUX_INCLUDE)) + CMD += LINUX_INCLUDE=$(LINUX_INCLUDE) +endif + +# gmake does not understand $(CMD) to be a submake +# options are to +$(CMD) or $(MAKE) $(CMD) +# trying the latter +build: + $(MAKE) $(CMD) + +DELIVER clean C_COMPILER CXX_COMPILER variable mod bcm user: + $(MAKE) $(CMD) $@ + +clean_d: clean + +distclean: + $(MAKE) $(CMD) $@ + +.PHONY: build clean distclean clean_d DELIVER variable mod bcm user + diff --git a/platform/broadcom/saibcm-modules/make/Make.local b/platform/broadcom/saibcm-modules/make/Make.local new file mode 100644 index 000000000000..be0603fad775 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Make.local @@ -0,0 +1,2 @@ +#Changing value of this Knet filter +CFGFLAGS += -UKCOM_FILTER_MAX -DKCOM_FILTER_MAX=256 diff --git a/platform/broadcom/saibcm-modules/make/Make.subdirs b/platform/broadcom/saibcm-modules/make/Make.subdirs new file mode 100644 index 000000000000..69363da2ffb2 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Make.subdirs @@ -0,0 +1,45 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Make.subdirs,v 1.8 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +# Make rules/targets for handling subdirectories + +.PHONY: ${subdirs} + +all:: ${subdirs} +ifdef QUIET + @$(ECHO) Subdirectory build for ${subdirs} +endif + +${subdirs}:: + $Q$(MAKE) -C $@ kernel_version=$(kernel_version) LINUX_MAKE_SHARED_LIB=${LINUX_MAKE_SHARED_LIB} SHAREDLIBVER=${SHAREDLIBVER} + +ifeq "$(HOSTTYPE)" "Windows2000PC" +clean clean_d install distclean:: +ifdef QUIET + @$(ECHO) Subdirectory $@ for ${subdirs} +endif + $Q$(FOREACH) "$(subdirs)" "${MAKE} -C ## $@" +else +clean clean_d install distclean:: +ifdef QUIET + @$(ECHO) Subdirectory $@ for ${subdirs} +endif + @(for name in $(subdirs); do $(MAKE) -C $$name $@; done) +endif diff --git a/platform/broadcom/saibcm-modules/make/Make.tools b/platform/broadcom/saibcm-modules/make/Make.tools new file mode 100644 index 000000000000..c53d9d4276cc --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Make.tools @@ -0,0 +1,39 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Make.tools,v 1.2 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +SYSNAME := $(shell uname -s) +HCC ?=/usr/bin/gcc +SED = /bin/sed +COMPRESS = /usr/bin/compress +PERL = /usr/bin/perl +LN = /bin/ln +HOSTTYPE= i386-linux + +# +# Platform Independent +# +MKTOOL = $(PERL) ${SDK}/tools/mktool.pl +RM = $(MKTOOL) -rm +MKDIR = $(MKTOOL) -md +FOREACH = $(MKTOOL) -foreach +CP = $(MKTOOL) -cp +MAKEDEP = $(MKTOOL) -dep +ECHO = $(MKTOOL) -echo +MKBEEP = ${MKTOOL} -beep diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-gto b/platform/broadcom/saibcm-modules/make/Makefile.linux-gto new file mode 100644 index 000000000000..ee45fc26a595 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-gto @@ -0,0 +1,115 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-gto-4_4,v 1.42 Broadcom SDK $ +# $Copyright: (c) 2015 Broadcom Corp. +# All Rights Reserved.$ + +# User must select one platform from below. +ifeq (,$(BUILD_PLATFORM)) +BUILD_PLATFORM=POWERPC_LINUX +endif + +# TOOLCHAIN_BASE_DIR Toolchain base directory for GTO devices +# TARGET_ARCHITECTURE Compiler for target architecture +# KERNDIR Kernel directory for iPROC-CMICd devices +TOOLCHAIN_BASE_DIR ?= /projects/ntsw-tools/linux/gto +TARGET_ARCHITECTURE := powerpc-broadcom-linux-gnuspe +KERNDIR ?= $(TOOLCHAIN_BASE_DIR)/kernel/current + + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE := $(TARGET_ARCHITECTURE)- +endif + + +# GTO toolchain +TOOLCHAIN_BIN_DIR := $(TOOLCHAIN_BASE_DIR)/toolchain/host/usr/bin +override PATH := $(TOOLCHAIN_BIN_DIR)/../$(TARGET_ARCHITECTURE)/bin:$(TOOLCHAIN_BIN_DIR):$(PATH) +export TOOLCHAIN_BIN_DIR + + +# Default Linux include directory +ifeq (,$(LINUX_INCLUDE)) +LINUX_INCLUDE := $(KERNDIR)/include +endif + +CFGFLAGS += -DSYS_BE_PIO=1 -DSYS_BE_PACKET=0 -DSYS_BE_OTHER=1 +ENDIAN = BE_HOST=1 +CFGFLAGS += -D$(ENDIAN) +CFGFLAGS += -DBCM_PLATFORM_STRING=\"GTO_MPC8548\" +CFGFLAGS += -DSAL_BDE_DMA_MEM_DEFAULT=32 + +# Extra variables. +EXTRA_CFLAGS = -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) + +ARCH = powerpc +KBUILD_VERBOSE = 1 + +export ARCH KBUILD_VERBOSE + + +# From linux/arch/ppc/Makefile +comma = , +basetarget = $(basename $(notdir $@)) +modname = $(basetarget) + +name-fix = $(subst $(comma),_,$(subst -,_,$1)) +basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" +modname_flags = $(if $(filter 1,$(words $(modname))),\ + -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") + +KFLAG_INCLD = $(TOOLCHAIN_BIN_DIR)/../lib/gcc/$(TARGET_ARCHITECTURE)/4.6.4/include + +ifdef BROADCOM_SVK +ifdef BCM_BME3200_B0 +PLX_PCI2LBUS=1 +endif +ifdef BCM_BM9600_B0 +PLX_PCI2LBUS=1 +endif +ifeq ($PLX_PCI2LBUS, 1) +CFLAGS += -DBCM_PLX9656_LOCAL_BUS -DBDE_LINUX_NON_INTERRUPTIBLE +endif +endif + +ifdef DPP_CHIPS +CFLAGS += -DDUNE_BCM -D__DUNE_GTO_BCM_CPU__ -D__DUNE_LINUX_BCM_CPU_PCIE__ -D__DUNE_LINUX_BCM_CPU_PCP_DMA__ +CFGFLAGS += -DSOC_CM_FUNCTION +endif + +ifdef DFE_CHIPS +CFLAGS += -DDUNE_BCM -D__DUNE_GTO_BCM_CPU__ -D__DUNE_LINUX_BCM_CPU_PCIE__ +CFGFLAGS += -DSOC_CM_FUNCTION +endif + +ifdef SHADOW_PLX +CFLAGS += -DBCM_PLX9656_LOCAL_BUS -DBDE_LINUX_NON_INTERRUPTIBLE -DSHADOW_SVK +endif + +ifeq (,$(KFLAGS)) +KFLAGS := -D__KERNEL__ -m32 -nostdinc -isystem $(KFLAG_INCLD) -I$(LINUX_INCLUDE) -include $(LINUX_INCLUDE)/generated/uapi/linux/version.h -include $(LINUX_INCLUDE)/generated/autoconf.h -I$(KERNDIR)/arch/powerpc -I$(KERNDIR)/arch/powerpc/include -I$(KERNDIR)/include/asm-powerpc -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -msoft-float -pipe -ffixed-r2 -mmultiple -mno-altivec -funit-at-a-time -Wa,-me500 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign +endif + +ifneq (,$(findstring TCL,$(FEATURE_LIST))) +#LINK_STATIC = 0 +#export LINK_STATIC +endif + +ifneq ($(targetplat),user) +include ${SDK}/make/Makefile.linux-kernel-4_4 +endif + diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-gto-2_6 b/platform/broadcom/saibcm-modules/make/Makefile.linux-gto-2_6 new file mode 100644 index 000000000000..0ca62fc01f51 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-gto-2_6 @@ -0,0 +1,271 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-gto-2_6,v 1.42 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +# User must select one platform from below.By default WR_LINUX is selected. . +ifeq (,$(BUILD_PLATFORM)) +#BUILD_PLATFORM=ELDK +BUILD_PLATFORM=WR_LINUX +endif + +# Specify the ELDK version you want to use for building SDK. +ifeq (,$(ELDK_VERSION)) +ifeq (ELDK,$(BUILD_PLATFORM)) +ELDK_VERSION=4.0 +endif +endif + +# Specify the KERNEL VERSION you want to use for building SDK. +ifeq (,$(KERN_VER)) +ifeq (ELDK,$(BUILD_PLATFORM)) +KERN_VER=2.6.21.7 +endif +endif + + +# Specify the Windriver Linux version here.For example '2.0' as shown below. +ifeq (WR_LINUX,$(BUILD_PLATFORM)) +ifeq (,$(WRS_LINUX_VERSION)) +WRS_LINUX_VERSION=2.0 +endif +endif + + +#glibc_small and glibc_std have their own cross-compilation tools and and path for these tools are different as implemented below. To enable glibc_small build, line given below should be uncommented. + +#WRL_GLIBC_SMALL=TRUE + +ifeq (2.0,$(WRS_LINUX_VERSION)) +ifeq ($(WRL_GLIBC_SMALL),TRUE) + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE := powerpc-wrs-linux-gnu-ppc_e500v2-glibc_small- +endif + +KERNDIR ?=/projects/ntsw-tools/linux/wrslinux_2.0/gto/glibc_small/build/linux-2.6.21-standard + +else + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE := powerpc-wrs-linux-gnu-ppc_e500v2-glibc_std- +endif + +KERNDIR ?= /projects/ntsw-tools/linux/wrslinux_2.0/gto/glibc_std/build/linux-2.6.21-standard + +endif + +export WRL_GLIBC_SMALL + +# After this point glibc_std and glibc_small share these flags + +WRLINUX_BASE ?=/tools/windriver/linux_ed/2.0_GA/Linux +TOOLCHAIN_EXEC_PREFIX=$(WRLINUX_BASE)/gnu/4.1-wrlinux-2.0/x86-linux2 +TOOLCHAIN_BIN_DIR=$(TOOLCHAIN_EXEC_PREFIX) +WIND_LIC_PROXY=$(WRLINUX_BASE)/setup/x86-linux2/bin +WRLINUX_GNU_PATH = $(WRLINUX_BASE)/gnu/4.1-wrlinux-2.0/x86-linux2/bin +override PATH := $(TOOLCHAIN_EXEC_PREFIX):$(KERNDIR)/../../host-cross/bin:$(KERNDIR)/../../host-cross/powerpc-wrs-linux-gnu/bin:$(WRLINUX_GNU_PATH):$(PATH) +export TOOLCHAIN_EXEC_PREFIX TOOLCHAIN_BIN_DIR WIND_LIC_PROXY +endif + + +ifeq (3.0,$(WRS_LINUX_VERSION)) +ifeq ($(WRL_GLIBC_SMALL),TRUE) + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE := powerpc-wrs-linux-gnu-ppc_e500v2-glibc_small- +endif + +KERNDIR ?=/projects/ntsw-tools/linux/wrslinux_3.0/gto/bcm98548xmc_30_glibc_small/build/linux-broadcom_bcm98548xmc-standard-build +KERNDIR_STD ?=/projects/ntsw-tools/linux/wrslinux_3.0/gto/bcm98548xmc_30_glibc_small/build/linux + +else + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE := powerpc-wrs-linux-gnu-ppc_e500v2-glibc_std- +endif + +KERNDIR ?=/projects/ntsw-tools/linux/wrslinux_3.0/gto/bcm98548xmc_30_glibc_std_debug/build/linux-broadcom_bcm98548xmc-standard-build +KERNDIR_STD ?=/projects/ntsw-tools/linux/wrslinux_3.0/gto/bcm98548xmc_30_glibc_std_debug/build/linux + +endif + +export WRL_GLIBC_SMALL + +# After this point glibc_std and glibc_small share these flags + +WRLINUX_BASE ?=/tools/windriver/linux_ed/3.0/Linux +TOOLCHAIN_EXEC_PREFIX=$(WRLINUX_BASE)/wrlinux-3.0/layers/wrll-toolchain-4.3-85/powerpc/toolchain/x86-linux2 +TOOLCHAIN_BIN_DIR=$(TOOLCHAIN_EXEC_PREFIX) +WIND_LIC_PROXY=$(WRLINUX_BASE)/setup/x86-linux2/bin +WRLINUX_GNU_PATH = $(WRLINUX_BASE)/wrlinux-3.0/layers/wrll-toolchain-4.3-85/powerpc/toolchain/x86-linux2/bin +override PATH := $(TOOLCHAIN_EXEC_PREFIX):$(KERNDIR_STD)/../../host-cross/bin:$(KERNDIR_STD)/../../host-cross/powerpc-wrs-linux-gnu/bin:$(WRLINUX_GNU_PATH):$(PATH) +export TOOLCHAIN_EXEC_PREFIX TOOLCHAIN_BIN_DIR WIND_LIC_PROXY + +LINUX_INCLUDE_STD := $(KERNDIR_STD)/include + +endif + +ifeq (ELDK,$(BUILD_PLATFORM)) +ifeq (2.6.21.7, $(KERN_VER)) + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE := ppc_85xx- +endif + +ifeq (4.0, $(ELDK_VERSION)) +override PATH := /tools/eldk/4.0/usr/bin:$(PATH) +else +override PATH := /tools/eldk/4.1/usr/bin:$(PATH) +endif +KERNDIR ?= /projects/ntsw-tools/linux/eldk/gto_eldk/linux-2.6.21.7 +endif +endif + +ifeq (ELDK,$(BUILD_PLATFORM)) +ifeq (2.6.24.4, $(KERN_VER)) + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE := ppc_85xx- +endif + +ifeq (4.0, $(ELDK_VERSION)) +override PATH := /tools/eldk/4.0/usr/bin:$(PATH) +else +override PATH := /tools/eldk/4.1/usr/bin:$(PATH) +endif +KERNDIR ?= /projects/ntsw-tools/linux/eldk/gto_eldk/linux-2.6.24.4 +endif +endif + + +ifeq (ELDK,$(BUILD_PLATFORM)) +ifeq (2.6.25, $(KERN_VER)) + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE := ppc_85xx- +endif + +ifeq (4.0, $(ELDK_VERSION)) +override PATH := /tools/eldk/4.0/usr/bin:$(PATH) +else +override PATH := /tools/eldk/4.1/usr/bin:$(PATH) +endif +KERNDIR ?= /projects/ntsw-tools/linux/eldk/gto_eldk/linux-2.6.25 +endif +endif + + +# Default Linux include directory +ifeq (,$(LINUX_INCLUDE)) +LINUX_INCLUDE := $(KERNDIR)/include +endif + +CFGFLAGS += -DSYS_BE_PIO=1 -DSYS_BE_PACKET=0 -DSYS_BE_OTHER=1 +ENDIAN = BE_HOST=1 +CFGFLAGS += -D$(ENDIAN) +CFGFLAGS += -DBCM_PLATFORM_STRING=\"GTO_MPC8548\" +CFGFLAGS += -DSAL_BDE_DMA_MEM_DEFAULT=32 + +# Extra variables. +EXTRA_CFLAGS = -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) + +ARCH = powerpc +KBUILD_VERBOSE = 1 + +export ARCH KBUILD_VERBOSE + + +# From linux/arch/ppc/Makefile +comma = , +basetarget = $(basename $(notdir $@)) +modname = $(basetarget) + +name-fix = $(subst $(comma),_,$(subst -,_,$1)) +basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" +modname_flags = $(if $(filter 1,$(words $(modname))),\ + -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") + + +ifeq (,$(KFLAG_INCLD)) +ifeq (4.0,$(ELDK_VERSION)) +ifeq (ELDK,$(BUILD_PLATFORM)) +KFLAG_INCLD = /tools/eldk/4.0/usr/lib/gcc/powerpc-linux/4.0.0/include +endif +endif + +ifeq (4.1,$(ELDK_VERSION)) +ifeq (ELDK,$(BUILD_PLATFORM)) +KFLAG_INCLD = /tools/eldk/4.1/usr/lib/gcc/powerpc-linux/4.0.0/include +endif +endif + +ifeq (2.0,$(WRS_LINUX_VERSION)) +KFLAG_INCLD = $(WRLINUX_GNU_PATH)/../lib/gcc/powerpc-wrs-linux-gnu/4.1.2/include +endif + +ifeq (3.0,$(WRS_LINUX_VERSION)) +KFLAG_INCLD = $(WRLINUX_GNU_PATH)/../lib/gcc/powerpc-wrs-linux-gnu/4.3.2/include +endif +endif + +ifdef BROADCOM_SVK +ifdef BCM_BME3200_B0 +PLX_PCI2LBUS=1 +endif +ifdef BCM_BM9600_B0 +PLX_PCI2LBUS=1 +endif +ifeq ($PLX_PCI2LBUS, 1) +CFLAGS += -DBCM_PLX9656_LOCAL_BUS -DBDE_LINUX_NON_INTERRUPTIBLE +endif +endif + +ifdef DPP_CHIPS +CFLAGS += -DDUNE_BCM -D__DUNE_LINUX_BCM_CPU_PCP_DMA__ +CFGFLAGS += -DSOC_CM_FUNCTION +endif + +ifdef DFE_CHIPS +CFLAGS += -DDUNE_BCM +CFGFLAGS += -DSOC_CM_FUNCTION +endif + +ifdef SAND_CHIPS +CFLAGS += -D__DUNE_GTO_BCM_CPU__ -D__DUNE_LINUX_BCM_CPU_PCIE__ +endif + +ifdef SHADOW_PLX +CFLAGS += -DBCM_PLX9656_LOCAL_BUS -DBDE_LINUX_NON_INTERRUPTIBLE -DSHADOW_SVK +endif + +ifeq (,$(KFLAGS)) +KFLAGS := -D__KERNEL__ -m32 -nostdinc -isystem $(KFLAG_INCLD) -I$(LINUX_INCLUDE) -include $(LINUX_INCLUDE)/linux/version.h -include $(LINUX_INCLUDE)/generated/autoconf.h -I$(KERNDIR)/arch/powerpc -I$(KERNDIR)/arch/powerpc -I$(KERNDIR)/arch/powerpc/include -I$(KERNDIR)/include/asm-powerpc -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -msoft-float -pipe -ffixed-r2 -mmultiple -mno-altivec -funit-at-a-time -Wa,-me500 -fomit-frame-pointer -Wdeclaration-after-statement -Wno-pointer-sign +endif + +#Wind river Linux 3.0 needs addtional flags +ifeq (3.0,$(WRS_LINUX_VERSION)) + +# Use MSI interrupts if kernel is compiled with MSI support. +#CFLAGS += -DBDE_LINUX_USE_MSI_INTERRUPT +KFLAGS += -I$(LINUX_INCLUDE_STD) -I$(KERNDIR_STD)/arch/powerpc -I$(KERNDIR_STD)/arch/powerpc/include -I$(KERNDIR_STD)/include.asm-powerpc -mno-spe +endif + +ifneq ($(targetplat),user) +include ${SDK}/make/Makefile.linux-kernel-2_6 +endif diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-iproc b/platform/broadcom/saibcm-modules/make/Makefile.linux-iproc new file mode 100644 index 000000000000..272ad93ef842 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-iproc @@ -0,0 +1,93 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-iproc Exp $ +# $Copyright: (c) 2007 Broadcom Corp. +# All Rights Reserved.$ +# Makefile for iproc-CMICd + +# User must select one platform from below.By default ARM_LINUX is selected. . +ifeq (,$(BUILD_PLATFORM)) +BUILD_PLATFORM=ARM_LINUX +endif + +# TOOLCHAIN_BASE_DIR Toolchain base directory for iPROC-CMICd devices +# TARGET_ARCHITECTURE Compiler for target architecture +# KERNDIR Kernel directory for iPROC-CMICd devices +ifeq (BE,$(ENDIAN_MODE)) +TOOLCHAIN_BASE_DIR ?= /projects/ntsw-tools/linux/iproc_ldks/iproc-be/XLDK +TARGET_ARCHITECTURE:=armeb-broadcom-linux-uclibcgnueabi +KERNDIR ?= $(TOOLCHAIN_BASE_DIR)/kernel/linux +else +TOOLCHAIN_BASE_DIR ?= /projects/ntsw-tools/linux/iproc_ldks/iproc/XLDK +TARGET_ARCHITECTURE:= arm-broadcom-linux-uclibcgnueabi +KERNDIR ?= $(TOOLCHAIN_BASE_DIR)/kernel/linux +endif + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE:= $(TARGET_ARCHITECTURE)- +endif + +# arm9tools +TOOLCHAIN_BIN_DIR=$(TOOLCHAIN_BASE_DIR)/buildroot/host/usr/bin +override PATH:=$(TOOLCHAIN_BASE_DIR)/buildroot/host/usr/$(TARGET_ARCHITECTURE)/bin:$(TOOLCHAIN_BIN_DIR):$(PATH) +LD_LIBRARY_PATH=$(TOOLCHAIN_BASE_DIR)/buildroot/host/usr/lib + +export TOOLCHAIN_BIN_DIR LD_LIBRARY_PATH + +# Default Linux include directory +ifeq (,$(LINUX_INCLUDE)) +LINUX_INCLUDE := $(KERNDIR)/include +endif + +ifeq (BE,$(ENDIAN_MODE)) +CFGFLAGS += -DSYS_BE_PIO=1 -DSYS_BE_PACKET=0 -DSYS_BE_OTHER=1 +ENDIAN = BE_HOST=1 +else +CFGFLAGS += -DSYS_BE_PIO=0 -DSYS_BE_PACKET=0 -DSYS_BE_OTHER=0 +ENDIAN = LE_HOST=1 +endif + +CFGFLAGS += -D$(ENDIAN) -DIPROC_CMICD +CFGFLAGS += -DBCM_PLATFORM_STRING=\"IPROC_CMICD\" + +ARCH = arm +KBUILD_VERBOSE = 1 + +export ARCH KBUILD_VERBOSE + +comma = , +basetarget = $(basename $(notdir $@)) +modname = $(basetarget) + +# Extra variables. +EXTRA_CFLAGS = -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) + +name-fix = $(subst $(comma),_,$(subst -,_,$1)) +basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" +modname_flags = $(if $(filter 1,$(words $(modname))),\ + -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") + +KFLAG_INCLD ?= $(TOOLCHAIN_BASE_DIR)/buildroot/host/usr/lib/gcc/$(TARGET_ARCHITECTURE)/4.9.3/include + +ifeq (,$(KFLAGS)) +KFLAGS := -D__LINUX_ARM_ARCH__=7 -D__KERNEL__ -nostdinc -isystem $(KFLAG_INCLD) -I$(LINUX_INCLUDE) -include $(LINUX_INCLUDE)/generated/autoconf.h -I$(KERNDIR)/arch/arm/include -I$(KERNDIR)/arch/arm/include/generated -I$(KERNDIR)/arch/arm/mach-iproc/include -Wall -Wstrict-prototypes -Wno-trigraphs -Os -fno-strict-aliasing -fno-common -marm -mabi=aapcs-linux -fno-pic -pipe -msoft-float -ffreestanding -march=armv7-a -mfpu=vfp -mfloat-abi=softfp -fomit-frame-pointer -g -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -mlong-calls +KFLAGS += -I$(LINUX_INCLUDE)/uapi -I$(LINUX_INCLUDE)/generated/uapi -I$(KERNDIR)/arch/arm/include/uapi -I$(KERNDIR)/arch/arm/include/generated/uapi +endif + +ifneq ($(targetplat),user) +include ${SDK}/make/Makefile.linux-kernel-3_6 +endif diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-iproc-3_14 b/platform/broadcom/saibcm-modules/make/Makefile.linux-iproc-3_14 new file mode 100644 index 000000000000..e8a17b184710 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-iproc-3_14 @@ -0,0 +1,104 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-iproc-3_6,v 1.1 Broadcom SDK $ +# $Copyright: (c) 2007 Broadcom Corp. +# All Rights Reserved.$ +# Makefile for iproc-CMICd + +# User must select one platform from below.By default ARM_LINUX is selected. . +ifeq (,$(BUILD_PLATFORM)) +BUILD_PLATFORM=ARM_LINUX +endif + +# TOOLCHAIN_BASE_DIR Toolchain base directory for iPROC-CMICd devices +# TARGET_ARCHITECTURE Compiler for target architecture +# KERNDIR Kernel directory for iPROC-CMICd devices +ifeq (BE,$(ENDIAN_MODE)) +TOOLCHAIN_BASE_DIR ?= /projects/ntsw-tools/linux/iproc_ldks/xldk37-be/buildroot-2013.11-gcc48-opt-broadcom +TARGET_ARCHITECTURE:=armeb-buildroot-linux-gnueabi +KERNDIR ?= /projects/ntsw-tools/linux/iproc_ldks/xldk37-be/XLDK/kernel/linux +else +TOOLCHAIN_BASE_DIR ?= /projects/ntsw-tools/linux/iproc_ldks/xldk37/XLDK +TARGET_ARCHITECTURE:= arm-broadcom-linux-uclibcgnueabi +KERNDIR ?= $(TOOLCHAIN_BASE_DIR)/kernel/linux +endif + + +ifeq (,$(CROSS_COMPILE)) +CROSS_COMPILE:= $(TARGET_ARCHITECTURE)- +endif + +# arm9tools +ifeq (BE,$(ENDIAN_MODE)) +TOOLCHAIN_BIN_DIR=$(TOOLCHAIN_BASE_DIR)/host/usr/bin +override PATH:=$(TOOLCHAIN_BASE_DIR)/host/usr/$(TARGET_ARCHITECTURE)/bin:$(TOOLCHAIN_BIN_DIR):$(PATH) +LD_LIBRARY_PATH=$(TOOLCHAIN_BASE_DIR)/host/usr/lib +else +TOOLCHAIN_BIN_DIR=$(TOOLCHAIN_BASE_DIR)/buildroot/usr/bin +override PATH:=$(TOOLCHAIN_BASE_DIR)/buildroot/usr/$(TARGET_ARCHITECTURE)/bin:$(TOOLCHAIN_BIN_DIR):$(PATH) +LD_LIBRARY_PATH=$(TOOLCHAIN_BASE_DIR)/buildroot/usr/lib +endif + +export TOOLCHAIN_BIN_DIR LD_LIBRARY_PATH + +# Default Linux include directory +ifeq (,$(LINUX_INCLUDE)) +LINUX_INCLUDE := $(KERNDIR)/include +endif + +ifeq (BE,$(ENDIAN_MODE)) +CFGFLAGS += -DSYS_BE_PIO=1 -DSYS_BE_PACKET=0 -DSYS_BE_OTHER=1 +ENDIAN = BE_HOST=1 +else +CFGFLAGS += -DSYS_BE_PIO=0 -DSYS_BE_PACKET=0 -DSYS_BE_OTHER=0 +ENDIAN = LE_HOST=1 +endif + +CFGFLAGS += -D$(ENDIAN) -DIPROC_CMICD +CFGFLAGS += -DBCM_PLATFORM_STRING=\"IPROC_CMICD\" + +ARCH = arm +KBUILD_VERBOSE = 1 + +export ARCH KBUILD_VERBOSE + +comma = , +basetarget = $(basename $(notdir $@)) +modname = $(basetarget) + +# Extra variables. +EXTRA_CFLAGS = -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) + +name-fix = $(subst $(comma),_,$(subst -,_,$1)) +basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" +modname_flags = $(if $(filter 1,$(words $(modname))),\ + -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") + +ifeq (BE,$(ENDIAN_MODE)) +KFLAG_INCLD ?= $(TOOLCHAIN_BASE_DIR)/host/usr/lib/gcc/$(TARGET_ARCHITECTURE)/4.8.2/include +else +KFLAG_INCLD ?= $(TOOLCHAIN_BASE_DIR)/buildroot/usr/lib/gcc/$(TARGET_ARCHITECTURE)/4.7.2/include +endif + +ifeq (,$(KFLAGS)) +KFLAGS := -D__LINUX_ARM_ARCH__=7 -D__KERNEL__ -nostdinc -isystem $(KFLAG_INCLD) -I$(LINUX_INCLUDE) -include $(LINUX_INCLUDE)/generated/autoconf.h -I$(KERNDIR)/arch/arm/include -I$(KERNDIR)/arch/arm/include/generated -I$(KERNDIR)/arch/arm/mach-northstar/include -I$(KERNDIR)/arch/arm/plat-iproc/include -Wall -Wstrict-prototypes -Wno-trigraphs -Os -fno-strict-aliasing -fno-common -marm -mabi=aapcs-linux -fno-pic -pipe -msoft-float -ffreestanding -march=armv7-a -mfpu=vfp -mfloat-abi=softfp -fomit-frame-pointer -g -fno-stack-protector -Wdeclaration-after-statement -Wno-pointer-sign -mlong-calls +KFLAGS += -I$(LINUX_INCLUDE)/uapi -I$(LINUX_INCLUDE)/generated/uapi -I$(KERNDIR)/arch/arm/include/uapi -I$(KERNDIR)/arch/arm/include/generated/uapi +endif + +ifneq ($(targetplat),user) +include ${SDK}/make/Makefile.linux-kernel-3_6 +endif diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel b/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel new file mode 100644 index 000000000000..2b8c36d6d4b0 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel @@ -0,0 +1,113 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-kernel,v 1.27 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +# Configuration Flags + +# Filter out features that cannot or should not be supported in kernel mode +_FEATURE_EXCLUDE_LIST += EDITLINE TCL OOB_RCPU CINT APIMODE DUNE_UI C_UNIT +FEATURE_EXCLUDE_LIST = $(sort $(_FEATURE_EXCLUDE_LIST)) +# Tools + +CC = $(CROSS_COMPILE)gcc +CXX = $(CROSS_COMPILE)g++ +LD = $(CROSS_COMPILE)ld +AR = $(CROSS_COMPILE)ar +ARFLAGS = -rc +STRIP = $(CROSS_COMPILE)strip +RANLIB = $(CROSS_COMPILE)ranlib +OBJCOPY = $(CROSS_COMPILE)objcopy + +# Handle differences between gcc 2.x and gcc 3.x +gcc-tune-flag = $(shell if ${CC} -dumpspecs | grep mcpu >/dev/null; then echo cpu; else echo tune; fi) + +# Configuration Variables + +# OSType Defines: This defines the type of RTOS or microkernel which you +# are compiling the SAL (and its associated driver) for. New platforms +# can be created by porting the routines (system.c) to your platform and +# adding the define in this Makefile. + +OSTYPE = LINUX + +# +# ORIGIN is used to Optionally select different CFLAGS. It is used to import +# source from other vendors. If SOURCE=Broadcom, then the BCM_ flags are added +# to those passed to the compiler. If SOURCE != Broadcom, BCM_ flags are NOT +# added. +# +# Default specifies Broadcom +# +ifndef ORIGIN + ORIGIN = Broadcom +endif + +# +# STD_{C|CPP|CXX}FLAGS - Standard flags used by ALL compilations +# BCM_{C|CPP|CXX}FLAGS - Flags used for Broadcom source files +# OPT_{C|CPP|CXX}FLAGS - Defined in local make files BEFORE inclusion of +# this Makefile, to define local "Extra" flags. +# + +CFGFLAGS += -I$(SDK)/systems/linux/kernel/modules/include \ + -I$(SDK)/systems/bde/linux/include \ + -I$(LINUX_INCLUDE) + +CFGFLAGS += -DNO_FILEIO -DNO_CTRL_C -DNO_MEMTUNE + +CFGFLAGS += -D$(OSTYPE) + +# No user sal for the linux kernel +# NO_SAL_APPL=1 + +STD_CFLAGS = $(KFLAGS) $(CFGFLAGS) + + +STD_CPPFLAGS = ${STD_CFLAGS} +STD_CXXFLAGS = ${STD_CFLAGS} + +BCM_CFLAGS = -Wall -Werror +BCM_CPPFLAGS = ${BCM_CFLAGS} +BCM_CXXFLAGS = ${BCM_CFLAGS} + +ifeq (${ORIGIN}, Broadcom) + CFLAGS += ${STD_CFLAGS} ${BCM_CFLAGS} ${OPT_CFLAGS} + CPPFLAGS += ${STD_CPPFLAGS} ${BCM_CPPFLAGS} ${OPT_CPPFLAGS} + CXXFLAGS += ${STD_CXXFLAGS} ${BCM_CXXFLAGS} ${OPT_CXXFLAGS} +else + CFLAGS += ${STD_CFLAGS} ${OPT_CFLAGS} + CPPFLAGS += ${STD_CPPFLAGS} ${OPT_CPPFLAGS} + CXXFLAGS += ${STD_CXXFLAGS} ${OPT_CXXFLAGS} +endif + +# +# Ignore pedantic flag for kernel modules +# +ifdef DEBUG_PEDANTIC +DEBUG_PEDANTIC = FALSE +endif + +# +# DEPEND is used as a command to generate the list of dependencies. +# The format of the output must be +# "file.o : file.c a/b/c.h d/e/f.h ...", +# if it is on multiple lines, each line must end in a backslash. +# The output MUST be on standard out. +# +DEPEND = ${CC} -M $(CFLAGS) $< diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-2_6 b/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-2_6 new file mode 100644 index 000000000000..52660bc64f18 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-2_6 @@ -0,0 +1,149 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-kernel-2_6,v 1.40 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +# Configuration Flags + +# Filter out features that cannot or should not be supported in kernel mode + +_FEATURE_EXCLUDE_LIST += EDITLINE TCL OOB_RCPU CINT APIMODE DUNE_UI C_UNIT +FEATURE_EXCLUDE_LIST = $(sort $(_FEATURE_EXCLUDE_LIST)) + +# Tools + +# Conditionally Replaces DEFAULT var +ifeq ($(origin CC),default) +CC = $(LSRUN) $(CROSS_COMPILE)gcc +endif + +ifeq ($(origin CXX),default) +CXX = $(CROSS_COMPILE)g++ +endif + +ifeq ($(origin LD),default) +LD = $(CROSS_COMPILE)ld +endif + +ifeq ($(origin AR),default) +AR = $(CROSS_COMPILE)ar +endif + +ifeq ($(origin AS),default) +AS = $(CROSS_COMPILE)as +endif + +ifeq ($(origin ARFLAGS),default) + ARFLAGS = -rc +endif + +STRIP = $(CROSS_COMPILE)strip +RANLIB = $(CROSS_COMPILE)ranlib +OBJCOPY = $(CROSS_COMPILE)objcopy +NM = $(CROSS_COMPILE)nm + +# Handle differences between gcc 2.x and gcc 3.x +gcc-tune-flag = $(shell if ${CC} -dumpspecs | grep mcpu >/dev/null; then echo cpu; else echo tune; fi) + +# Configuration Variables + +# OSType Defines: This defines the type of RTOS or microkernel which you +# are compiling the SAL (and its associated driver) for. New platforms +# can be created by porting the routines (system.c) to your platform and +# adding the define in this Makefile. + +OSTYPE = LINUX + +# +# ORIGIN is used to Optionally select different CFLAGS. It is used to import +# source from other vendors. If SOURCE=Broadcom, then the BCM_ flags are added +# to those passed to the compiler. If SOURCE != Broadcom, BCM_ flags are NOT +# added. +# +# Default specifies Broadcom +# +ifndef ORIGIN + ORIGIN = Broadcom +endif + +# +# STD_{C|CPP|CXX}FLAGS - Standard flags used by ALL compilations +# BCM_{C|CPP|CXX}FLAGS - Flags used for Broadcom source files +# OPT_{C|CPP|CXX}FLAGS - Defined in local make files BEFORE inclusion of +# this Makefile, to define local "Extra" flags. +# + +ifdef IPROC_BUILD +CFGFLAGS += -I$(SDK)/systems/linux/kernel/modules/include \ + -I$(SDK)/systems/bde/linux/include \ + -I$(LINUX_INCLUDE) \ + -I$(KERNDIR)/arch/$(ARCH) +else +CFGFLAGS += -I$(SDK)/systems/linux/kernel/modules/include \ + -I$(SDK)/systems/bde/linux/include \ + -I$(LINUX_INCLUDE) \ + -I$(LINUX_INCLUDE)/asm/gcc \ + -I$(LINUX_INCLUDE)/asm/mach-generic \ + -I$(KERNDIR)/arch/$(ARCH) +endif + +CFGFLAGS += -DNO_FILEIO -DNO_CTRL_C -DNO_MEMTUNE + +CFGFLAGS += -D$(OSTYPE) + +# No user sal for the linux kernel +# NO_SAL_APPL=1 + +STD_CFLAGS = $(KFLAGS) $(CFGFLAGS) + + +STD_CPPFLAGS = ${STD_CFLAGS} +STD_CXXFLAGS = ${STD_CFLAGS} + +ifndef BCM_CFLAGS +BCM_CFLAGS = -Wall -Werror +endif + +BCM_CPPFLAGS = ${BCM_CFLAGS} +BCM_CXXFLAGS = ${BCM_CFLAGS} + +ifeq (${ORIGIN}, Broadcom) + CFLAGS += ${STD_CFLAGS} ${BCM_CFLAGS} ${OPT_CFLAGS} + CPPFLAGS += ${STD_CPPFLAGS} ${BCM_CPPFLAGS} ${OPT_CPPFLAGS} + CXXFLAGS += ${STD_CXXFLAGS} ${BCM_CXXFLAGS} ${OPT_CXXFLAGS} +else + CFLAGS += ${STD_CFLAGS} ${OPT_CFLAGS} + CPPFLAGS += ${STD_CPPFLAGS} ${OPT_CPPFLAGS} + CXXFLAGS += ${STD_CXXFLAGS} ${OPT_CXXFLAGS} +endif + +# +# Ignore pedantic flag for kernel modules +# +ifdef DEBUG_PEDANTIC +DEBUG_PEDANTIC = FALSE +endif + +# +# DEPEND is used as a command to generate the list of dependencies. +# The format of the output must be +# "file.o : file.c a/b/c.h d/e/f.h ...", +# if it is on multiple lines, each line must end in a backslash. +# The output MUST be on standard out. +# +DEPEND = ${CC} -M $(CFLAGS) $< diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-3_6 b/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-3_6 new file mode 100644 index 000000000000..50f32816c686 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-3_6 @@ -0,0 +1,149 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-kernel-3_6,v 1.2 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +# Configuration Flags + +# Filter out features that cannot or should not be supported in kernel mode + +_FEATURE_EXCLUDE_LIST += EDITLINE TCL OOB_RCPU CINT APIMODE DUNE_UI +FEATURE_EXCLUDE_LIST = $(sort $(_FEATURE_EXCLUDE_LIST)) + +# Tools + +# Conditionally Replaces DEFAULT var +ifeq ($(origin CC),default) +CC = $(LSRUN) $(CROSS_COMPILE)gcc +endif + +ifeq ($(origin CXX),default) +CXX = $(CROSS_COMPILE)g++ +endif + +ifeq ($(origin LD),default) +LD = $(CROSS_COMPILE)ld +endif + +ifeq ($(origin AR),default) +AR = $(CROSS_COMPILE)ar +endif + +ifeq ($(origin AS),default) +AS = $(CROSS_COMPILE)as +endif + +ifeq ($(origin ARFLAGS),default) + ARFLAGS = -rc +endif + +STRIP = $(CROSS_COMPILE)strip +RANLIB = $(CROSS_COMPILE)ranlib +OBJCOPY = $(CROSS_COMPILE)objcopy +NM = $(CROSS_COMPILE)nm + +# Handle differences between gcc 2.x and gcc 3.x +gcc-tune-flag = $(shell if ${CC} -dumpspecs | grep mcpu >/dev/null; then echo cpu; else echo tune; fi) + +# Configuration Variables + +# OSType Defines: This defines the type of RTOS or microkernel which you +# are compiling the SAL (and its associated driver) for. New platforms +# can be created by porting the routines (system.c) to your platform and +# adding the define in this Makefile. + +OSTYPE = LINUX + +# +# ORIGIN is used to Optionally select different CFLAGS. It is used to import +# source from other vendors. If SOURCE=Broadcom, then the BCM_ flags are added +# to those passed to the compiler. If SOURCE != Broadcom, BCM_ flags are NOT +# added. +# +# Default specifies Broadcom +# +ifndef ORIGIN + ORIGIN = Broadcom +endif + +# +# STD_{C|CPP|CXX}FLAGS - Standard flags used by ALL compilations +# BCM_{C|CPP|CXX}FLAGS - Flags used for Broadcom source files +# OPT_{C|CPP|CXX}FLAGS - Defined in local make files BEFORE inclusion of +# this Makefile, to define local "Extra" flags. +# + +ifdef IPROC_BUILD +CFGFLAGS += -I$(SDK)/systems/linux/kernel/modules/include \ + -I$(SDK)/systems/bde/linux/include \ + -I$(LINUX_INCLUDE) \ + -I$(KERNDIR)/arch/$(ARCH) +else +CFGFLAGS += -I$(SDK)/systems/linux/kernel/modules/include \ + -I$(SDK)/systems/bde/linux/include \ + -I$(LINUX_INCLUDE) \ + -I$(LINUX_INCLUDE)/asm/gcc \ + -I$(LINUX_INCLUDE)/asm/mach-generic \ + -I$(KERNDIR)/arch/$(ARCH) +endif + +CFGFLAGS += -DNO_FILEIO -DNO_CTRL_C -DNO_MEMTUNE + +CFGFLAGS += -D$(OSTYPE) + +# No user sal for the linux kernel +# NO_SAL_APPL=1 + +STD_CFLAGS = $(KFLAGS) $(CFGFLAGS) + + +STD_CPPFLAGS = ${STD_CFLAGS} +STD_CXXFLAGS = ${STD_CFLAGS} + +ifndef BCM_CFLAGS +BCM_CFLAGS = -Wall -Werror +endif + +BCM_CPPFLAGS = ${BCM_CFLAGS} +BCM_CXXFLAGS = ${BCM_CFLAGS} + +ifeq (${ORIGIN}, Broadcom) + CFLAGS += ${STD_CFLAGS} ${BCM_CFLAGS} ${OPT_CFLAGS} + CPPFLAGS += ${STD_CPPFLAGS} ${BCM_CPPFLAGS} ${OPT_CPPFLAGS} + CXXFLAGS += ${STD_CXXFLAGS} ${BCM_CXXFLAGS} ${OPT_CXXFLAGS} +else + CFLAGS += ${STD_CFLAGS} ${OPT_CFLAGS} + CPPFLAGS += ${STD_CPPFLAGS} ${OPT_CPPFLAGS} + CXXFLAGS += ${STD_CXXFLAGS} ${OPT_CXXFLAGS} +endif + +# +# Ignore pedantic flag for kernel modules +# +ifdef DEBUG_PEDANTIC +DEBUG_PEDANTIC = FALSE +endif + +# +# DEPEND is used as a command to generate the list of dependencies. +# The format of the output must be +# "file.o : file.c a/b/c.h d/e/f.h ...", +# if it is on multiple lines, each line must end in a backslash. +# The output MUST be on standard out. +# +DEPEND = ${CC} -M $(CFLAGS) $< diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-4_4 b/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-4_4 new file mode 100644 index 000000000000..d662b04334e7 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-kernel-4_4 @@ -0,0 +1,158 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-kernel-2_6,v 1.40 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +# Configuration Flags + +# Filter out features that cannot or should not be supported in kernel mode + +_FEATURE_EXCLUDE_LIST += EDITLINE TCL OOB_RCPU CINT APIMODE DUNE_UI C_UNIT +FEATURE_EXCLUDE_LIST = $(sort $(_FEATURE_EXCLUDE_LIST)) + +# Tools + +# Conditionally Replaces DEFAULT var +ifeq ($(origin CC),default) +CC = $(LSRUN) $(CROSS_COMPILE)gcc +endif + +ifeq ($(origin CXX),default) +CXX = $(CROSS_COMPILE)g++ +endif + +ifeq ($(origin LD),default) +LD = $(CROSS_COMPILE)ld +endif + +ifeq ($(origin AR),default) +AR = $(CROSS_COMPILE)ar +endif + +ifeq ($(origin AS),default) +AS = $(CROSS_COMPILE)as +endif + +ifeq ($(origin ARFLAGS),default) + ARFLAGS = -rc +endif + +STRIP = $(CROSS_COMPILE)strip +RANLIB = $(CROSS_COMPILE)ranlib +OBJCOPY = $(CROSS_COMPILE)objcopy +NM = $(CROSS_COMPILE)nm + +# Handle differences between gcc 2.x and gcc 3.x +gcc-tune-flag = $(shell if ${CC} -dumpspecs | grep mcpu >/dev/null; then echo cpu; else echo tune; fi) + +# Configuration Variables + +# OSType Defines: This defines the type of RTOS or microkernel which you +# are compiling the SAL (and its associated driver) for. New platforms +# can be created by porting the routines (system.c) to your platform and +# adding the define in this Makefile. +OSTYPE = LINUX + +# +# ORIGIN is used to Optionally select different CFLAGS. It is used to import +# source from other vendors. If SOURCE=Broadcom, then the BCM_ flags are added +# to those passed to the compiler. If SOURCE != Broadcom, BCM_ flags are NOT +# added. +# +# Default specifies Broadcom +# +ifndef ORIGIN + ORIGIN = Broadcom +endif + +# +# STD_{C|CPP|CXX}FLAGS - Standard flags used by ALL compilations +# BCM_{C|CPP|CXX}FLAGS - Flags used for Broadcom source files +# OPT_{C|CPP|CXX}FLAGS - Defined in local make files BEFORE inclusion of +# this Makefile, to define local "Extra" flags. +# +ifdef IPROC_BUILD +CFGFLAGS += -I$(SDK)/systems/linux/kernel/modules/include \ + -I$(SDK)/systems/bde/linux/include \ + -I$(LINUX_INCLUDE) \ + -I$(LINUX_INCLUDE)/uapi \ + -I$(LINUX_INCLUDE)/generated/uapi \ + -I$(KERNDIR)/arch/$(ARCH) \ + -I$(KERNDIR)/arch/$(ARCH)/include/uapi \ + -I$(KERNDIR)/arch/$(ARCH)/include/generated \ + -I$(KERNDIR)/arch/$(ARCH)/include/generated/uapi +else +CFGFLAGS += -I$(SDK)/systems/linux/kernel/modules/include \ + -I$(SDK)/systems/bde/linux/include \ + -I$(LINUX_INCLUDE) \ + -I$(LINUX_INCLUDE)/asm/gcc \ + -I$(LINUX_INCLUDE)/asm/mach-generic \ + -I$(LINUX_INCLUDE)/uapi \ + -I$(LINUX_INCLUDE)/generated/uapi \ + -I$(KERNDIR)/arch/$(ARCH) \ + -I$(KERNDIR)/arch/$(ARCH)/include/uapi \ + -I$(KERNDIR)/arch/$(ARCH)/include/generated \ + -I$(KERNDIR)/arch/$(ARCH)/include/generated/uapi +endif + +CFGFLAGS += -DNO_FILEIO -DNO_CTRL_C -DNO_MEMTUNE + +CFGFLAGS += -D$(OSTYPE) + +# No user sal for the linux kernel +# NO_SAL_APPL=1 + +STD_CFLAGS = $(KFLAGS) $(CFGFLAGS) + + +STD_CPPFLAGS = ${STD_CFLAGS} +STD_CXXFLAGS = ${STD_CFLAGS} + +ifndef BCM_CFLAGS +BCM_CFLAGS = -Wall -Werror +endif + +BCM_CPPFLAGS = ${BCM_CFLAGS} +BCM_CXXFLAGS = ${BCM_CFLAGS} + +ifeq (${ORIGIN}, Broadcom) + CFLAGS += ${STD_CFLAGS} ${BCM_CFLAGS} ${OPT_CFLAGS} + CPPFLAGS += ${STD_CPPFLAGS} ${BCM_CPPFLAGS} ${OPT_CPPFLAGS} + CXXFLAGS += ${STD_CXXFLAGS} ${BCM_CXXFLAGS} ${OPT_CXXFLAGS} +else + CFLAGS += ${STD_CFLAGS} ${OPT_CFLAGS} + CPPFLAGS += ${STD_CPPFLAGS} ${OPT_CPPFLAGS} + CXXFLAGS += ${STD_CXXFLAGS} ${OPT_CXXFLAGS} +endif + +# +# Ignore pedantic flag for kernel modules +# +ifdef DEBUG_PEDANTIC +DEBUG_PEDANTIC = FALSE +endif + +# +# DEPEND is used as a command to generate the list of dependencies. +# The format of the output must be +# "file.o : file.c a/b/c.h d/e/f.h ...", +# if it is on multiple lines, each line must end in a backslash. +# The output MUST be on standard out. +# +DEPEND = ${CC} -M $(CFLAGS) $< + diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-kmodule b/platform/broadcom/saibcm-modules/make/Makefile.linux-kmodule new file mode 100644 index 000000000000..a49919c615b2 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-kmodule @@ -0,0 +1,82 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-kmodule-3_6,v 1.2 Broadcom SDK $ +# $Copyright: (c) 2006 Broadcom Corp. +# All Rights Reserved.$ + +# Due to the extensive use of driver libraries, the SDK usually builds +# kernel modules from a precompiled object. To avoid various warnings +# and conflicts, the pre-compiled object must be named differently +# from the target module, and the object file itself should be +# appended with "_shipped". + +# If a module exports any symbols, then the exporting source file must +# be compiled within the kernel source tree for correct generation of +# module symbol versions. The symbol source file should be passed to +# this Makefile via the MODULE_SYM variable. + +MODULE := $(MOD_NAME).o +KMODULE := $(MOD_NAME).ko +PRE_COMPILED_OBJ := obj_$(MOD_NAME).o + +obj-m := $(MODULE) +$(MOD_NAME)-y := $(MODULE_SYM) $(PRE_COMPILED_OBJ) + + +ifeq (,$(CROSS_COMPILE)) + +export CROSS_COMPILE + +endif + +SAVE_CFLAGS := ${CFLAGS} + +include $(SDK)/make/Make.config + +PWD := $(shell pwd) + +ifneq ($(ARCH),) +# ELDK does not seem to `automatically' define ARCH where other gccs may +A := ARCH=$(ARCH) +export ARCH +endif + +# Provide an option in case kernel was built in separate directory +KERNBLDDIR ?= $(KERNDIR) + +# Standard SDK include path for building source files that export +# kernel symbols. + +override EXTRA_CFLAGS = -I${SDK}/include -I${SDK}/systems/linux/kernel/modules/include -I${SDK}/systems/bde/linux/include + +# The precopiled object needs a dummy command file to avoid warnings +# from the Kbuild scripts (modpost stage). +# Kernels before 2.6.17 do not support external module symbols files, +# so we create a dummy to prevent build failures. + +$(KMODULE): + rm -f *.o *.ko .*.cmd + rm -fr .tmp_versions + ln -s $(LIBDIR)/$(MODULE) $(PRE_COMPILED_OBJ)_shipped + echo "suppress warning" > .$(PRE_COMPILED_OBJ).cmd + $(MAKE) -C $(KERNBLDDIR) CROSS_COMPILE=$(CROSS_COMPILE) M=$(PWD) modules + if [ ! -f Module.symvers ]; then echo "old kernel (pre-2.6.17)" > Module.symvers; fi + cp -f $(KMODULE) $(LIBDIR) + rm -f $(PRE_COMPILED_OBJ)_shipped + +EXTRA_CFLAGS = $(CFLAGS) +CFLAGS := ${SAVE_CFLAGS} diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-x86-common-2_6 b/platform/broadcom/saibcm-modules/make/Makefile.linux-x86-common-2_6 new file mode 100644 index 000000000000..29fb4cddd652 --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-x86-common-2_6 @@ -0,0 +1,45 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-x86-common-2_6,v 1.13 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +CFGFLAGS += -DSYS_BE_PIO=0 -DSYS_BE_PACKET=0 -DSYS_BE_OTHER=0 +ENDIAN = LE_HOST=1 +CFGFLAGS += -D$(ENDIAN) +CFGFLAGS += -DBCM_PLATFORM_STRING=\"X86\" +ifeq (,$(findstring -DSAL_BDE_DMA_MEM_DEFAULT,$(CFGFLAGS))) +CFGFLAGS += -DSAL_BDE_DMA_MEM_DEFAULT=16 +endif + +# Extra variables. +EXTRA_CFLAGS = -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags) + +comma = , +basetarget = $(basename $(notdir $@)) +modname = $(basetarget) + +name-fix = $(subst $(comma),_,$(subst -,_,$1)) +basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))" +modname_flags = $(if $(filter 1,$(words $(modname))),\ +-D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))") + +ifneq ($(targetplat),user) +# By default we exclude -Werror from x86 kernel builds +BCM_CFLAGS = -Wall +include ${SDK}/make/Makefile.linux-kernel-2_6 +endif diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-x86-generic-common-2_6 b/platform/broadcom/saibcm-modules/make/Makefile.linux-x86-generic-common-2_6 new file mode 100644 index 000000000000..5e01f2843bae --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-x86-generic-common-2_6 @@ -0,0 +1,52 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-x86-generic-common-2_6,v 1.2 Broadcom SDK $ +# $Copyright: (c) 2008 Broadcom Corp. +# All Rights Reserved.$ + +# Default kernel source directory +ifeq (,$(KERNDIR)) +KERNDIR := /lib/modules/$(shell uname -r)/build +export KERNDIR +endif + +# Default architecture +ifeq (,$(ARCH)) +ARCH = $(shell uname -p) +ifneq (x86_64,$(ARCH)) +ARCH = i386 +endif +endif + +# Noisy kernel build +KBUILD_VERBOSE = 1 + +export ARCH KBUILD_VERBOSE KERNDIR + +# Default Linux include directory +ifeq (,$(LINUX_INCLUDE)) +LINUX_INCLUDE := $(KERNDIR)/include +endif + +# autoconf.h was moved in later kernels +AUTOCONF = $(KERNDIR)/include/generated/autoconf.h +ifeq (,$(shell ls $(AUTOCONF) 2>/dev/null)) +AUTOCONF = $(KERNDIR)/include/linux/autoconf.h +endif + +# gcc system include path +SYSINC = $(shell gcc -print-search-dirs | grep install | cut -c 10-)include diff --git a/platform/broadcom/saibcm-modules/make/Makefile.linux-x86-smp_generic_64-2_6 b/platform/broadcom/saibcm-modules/make/Makefile.linux-x86-smp_generic_64-2_6 new file mode 100644 index 000000000000..2c0242f9841f --- /dev/null +++ b/platform/broadcom/saibcm-modules/make/Makefile.linux-x86-smp_generic_64-2_6 @@ -0,0 +1,45 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# $Id: Makefile.linux-x86-smp_generic_64-2_6,v 1.5 Broadcom SDK $ +# $Copyright: (c) 2008 Broadcom Corp. +# All Rights Reserved.$ + +CFGFLAGS += -DLONGS_ARE_64BITS +CFGFLAGS += -DPTRS_ARE_64BITS +CFGFLAGS += -DPHYS_ADDRS_ARE_64BITS +CFGFLAGS += -DSAL_SPL_LOCK_ON_IRQ + +include ${SDK}/make/Makefile.linux-x86-generic-common-2_6 + +ifeq (,$(KFLAGS)) +KFLAGS := -nostdinc -isystem $(SYSINC) -I$(KERNDIR)/include -I$(KERNDIR)/arch/x86/include -include $(AUTOCONF) -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Werror-implicit-function-declaration -Wno-format-security -fno-delete-null-pointer-checks -Os -m64 -mtune=generic -mno-red-zone -mcmodel=kernel -funit-at-a-time -maccumulate-outgoing-args -DCONFIG_AS_CFI=1 -DCONFIG_AS_CFI_SIGNAL_FRAME=1 -pipe -Wno-sign-compare -fno-asynchronous-unwind-tables -mno-sse -mno-mmx -mno-sse2 -mno-3dnow -fno-stack-protector -fomit-frame-pointer -g -Wdeclaration-after-statement -Wno-pointer-sign +endif + +KFLAGS += -I$(LINUX_INCLUDE)/uapi -I$(LINUX_INCLUDE)/generated/uapi -I$(KERNDIR)/arch/x86/include/generated -I$(KERNDIR)/arch/x86/include/uapi -I$(KERNDIR)/arch/x86/include/generated/uapi + +ifeq ($(LINUX_MAKE_SHARED_LIB),1) +KFLAGS += -fPIC -mcmodel=small +else +KFLAGS += -mcmodel=kernel -fno-pie +endif + +ifeq (1,$(DEBIAN_LINUX_HEADER)) +KERNDIR_COMMON := $(subst amd64,common,$(KERNDIR)) +KFLAGS += -I$(KERNDIR_COMMON)/include -I$(KERNDIR_COMMON)/include/uapi -I$(KERNDIR_COMMON)/arch/x86/include -I$(KERNDIR_COMMON)/arch/x86/include/uapi +endif + +include ${SDK}/make/Makefile.linux-x86-common-2_6 diff --git a/platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-5-amd64.service b/platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-5-amd64.service new file mode 100644 index 000000000000..4da3f9761991 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-5-amd64.service @@ -0,0 +1,13 @@ +[Unit] +Description=Opennsl kernel modules init +After=local-fs.target +Before=syncd.service + +[Service] +Type=oneshot +ExecStart=-/etc/init.d/opennsl-modules-4.9.0-5-amd64 start +ExecStop=-/etc/init.d/opennsl-modules-4.9.0-5-amd64 stop +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/include/linux-bde.h b/platform/broadcom/saibcm-modules/systems/bde/linux/include/linux-bde.h new file mode 100644 index 000000000000..e0c23f73050a --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/include/linux-bde.h @@ -0,0 +1,275 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/*********************************************************************** + * + * $Id: linux-bde.h,v 1.24 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + * + * Linux Broadcom Device Enumerators + * + * + * There are two Linux BDEs: + * + * 1. Linux Kernel BDE + * + * This is a kernel module implementing a BDE + * for the driver running as part of the kernel. + * + * It manages the devices through the linux PCI interfaces, + * and manages a chunk of contiguous, boot-time allocated + * DMA memory. This is all that is needed if the BCM driver + * is run as part of the kernel (in another module). + * + * 2. Linux User BDE + * + * This is a kernel module and userland library which implement + * a complete BDE for applications running in userland. + * + * The kernel module relies upon the real kernel bde, + * and allows a user space application (through the user library) + * to talk directly to the devices. It also virtualized the device + * interrupts, so the entire driver can be run as a userspace + * application. + * + * While this causes a significant degradation in performance, + * because the system runs as a user application, the development + * and debugging process is about a gillion times easier. + * After the core logic is debugged, it can be retargeted using + * only the kernel bde and run in the kernel. + * + * + **********************************************************************/ + +#ifndef __LINUX_BDE_H__ +#define __LINUX_BDE_H__ + +#include + +#include + + +/* + * Device Major Numbers + * + * The kernel and user bdes need unique major numbers + * on systems that do not use devfs. + * + * They are defined here, along with the module names, + * to document them if you need to mknod them (or open) them, + * and to keep them unique. + * + */ + +#include + +#ifdef __KERNEL__ +#include +/* Key stone and Raptor has 2.6.21 but don't have definition */ +#if defined(KEYSTONE) || defined(RAPTOR) +#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,21)) + #ifdef PHYS_ADDRS_ARE_64BITS + typedef u64 phys_addr_t; + #else + typedef u32 phys_addr_t; + #endif + #endif +#endif +#endif + + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,15)) +#define LINUX_BDE_DMA_DEVICE_SUPPORT +#endif + +#define LINUX_KERNEL_BDE_NAME "linux-kernel-bde" +#define LINUX_KERNEL_BDE_MAJOR 127 + +#define LINUX_USER_BDE_NAME "linux-user-bde" +#define LINUX_USER_BDE_MAJOR 126 + + +/* Max devices */ +/* 16 switch chips + 2 out-of-band Ethernet + 2 CPUs */ +#define LINUX_BDE_MAX_SWITCH_DEVICES 16 +#define LINUX_BDE_MAX_ETHER_DEVICES 2 +#define LINUX_BDE_MAX_CPU_DEVICES 2 +#define LINUX_BDE_MAX_DEVICES (LINUX_BDE_MAX_SWITCH_DEVICES + \ + LINUX_BDE_MAX_ETHER_DEVICES + \ + LINUX_BDE_MAX_CPU_DEVICES) + +/* + * PCI devices will be initialized by the Linux Kernel, + * regardless of architecture. + * + * You need only provide bus endian settings. + */ + +typedef struct linux_bde_bus_s { + int be_pio; + int be_packet; + int be_other; +} linux_bde_bus_t; + + + +/* Device state used for PCI hot swap case. */ +/* + * BDE_DEV_STATE_NORMAL : A device is probed normally. Or when the device + * resource has been updated after "CHANGED", the state will move back to + * "NORMAL". + */ +#define BDE_DEV_STATE_NORMAL (0) +/* + * BDE_DEV_STATE_REMOVED : A previous probed device was removed. + * We will avoid any device access while the device is in this state. + * The state will be moved to "CHANGED" if the device is re-inserted + * and re-probed. + */ +#define BDE_DEV_STATE_REMOVED (1) +/* + * BDE_DEV_STATE_CHANGED : The device is re-probed after having been removed. + * The resouces assigned to the device might have been changed after + * re-probing, so we need to re-initialize our resource database accordingly. + * The state will change to "NORMAL" when the resource have been updated. + */ +#define BDE_DEV_STATE_CHANGED (2) + +extern int linux_bde_create(linux_bde_bus_t* bus, ibde_t** bde); +extern int linux_bde_destroy(ibde_t* bde); +#ifdef BCM_INSTANCE_SUPPORT +extern int linux_bde_instance_attach(unsigned int dev_mask,unsigned int dma_size); +#endif + +#ifdef __KERNEL__ + +/* + * Backdoors provided by the kernel bde + * + */ + +/* + * The user bde needs to get cpu physical address for + * the userland code to mmap. + * And the second address is bus address, it is either + * identical to cpu physical address or another address + * (IOVA) translated by IOMMU. + */ +extern int lkbde_get_dma_info(phys_addr_t *cpu_pbase, phys_addr_t *dma_pbase, ssize_t *size); +extern uint32 lkbde_get_dev_phys(int d); +extern uint32 lkbde_get_dev_phys_hi(int d); + +/* + * Virtual device address needed by kernel space + * interrupt handler. + */ +extern void *lkbde_get_dev_virt(int d); + +/* + * The user bde needs to get some physical addresses for + * the userland code to mmap. The following functions + * supports multiple resources for a single device. + */ +extern int lkbde_get_dev_resource(int d, int rsrc, uint32 *flags, + uint32 *phys_lo, uint32 *phys_hi); + +/* + * Backdoor to retrieve OS device structure to be used for + * DMA operations. + */ +extern void *lkbde_get_dma_dev(int d); + +/* + * Backdoor to retrieve original hardware/OS device. + */ +extern void *lkbde_get_hw_dev(int d); + +/* + * Retrive the device state from Kernel BDE. + * Used for KNET and User BDE for pci hot swap case. + */ +extern int lkbde_dev_state_get(int d, uint32 *state); +extern int lkbde_dev_state_set(int d, uint32 state); + +/* + * Retrive the mapping between emulated HW device and instance id + */ +extern int lkbde_dev_instid_get(int d, uint32 *instid); +extern int lkbde_dev_instid_set(int d, uint32 instid); + +/* + * Functions that allow an interrupt handler in user mode to + * coexist with interrupt handler in kernel module. + */ +extern int lkbde_irq_mask_set(int d, uint32 addr, uint32 mask, uint32 fmask); +extern int lkbde_irq_mask_get(int d, uint32 *mask, uint32 *fmask); + +#if (defined(BCM_PETRA_SUPPORT) || defined(BCM_DFE_SUPPORT)) +extern int lkbde_cpu_write(int d, uint32 addr, uint32 *buf); +extern int lkbde_cpu_read(int d, uint32 addr, uint32 *buf); +extern int lkbde_cpu_pci_register(int d); +#endif + +/* + * This flag must be OR'ed onto the device number when calling + * interrupt_connect/disconnect and irq_mask_set functions from + * a secondary device driver. + */ +#define LKBDE_ISR2_DEV 0x8000 + +#if defined(BCM_PETRA_SUPPORT) || defined(BCM_DFE_SUPPORT) +#include +#if defined(__DUNE_LINUX_BCM_CPU_PCIE__) && LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) +#ifndef _SIMPLE_MEMORY_ALLOCATION_ +#define _SIMPLE_MEMORY_ALLOCATION_ 1 +#endif +#ifndef USE_LINUX_BDE_MMAP +#define USE_LINUX_BDE_MMAP 1 +#endif +#endif +#endif + +#if defined(IPROC_CMICD) && defined(CONFIG_CMA) +#ifndef _SIMPLE_MEMORY_ALLOCATION_ +#define _SIMPLE_MEMORY_ALLOCATION_ 1 +#endif +#endif + +/* Don't use _SIMPLE_MEMORY_ALLOCATION_ method for newer kernel than 3.10.0 */ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0)) +#ifndef _SIMPLE_MEMORY_ALLOCATION_ +#define _SIMPLE_MEMORY_ALLOCATION_ 0 +#endif +#endif + +/* Allocation via dma_alloc_coherent is turned off by default */ +#ifndef _SIMPLE_MEMORY_ALLOCATION_ +#define _SIMPLE_MEMORY_ALLOCATION_ 9 /* compile in the allocation method, but do not use it by default */ +#endif + +/* By default we use our private mmap only if /dev/mem mmap has restrictions */ +#ifndef USE_LINUX_BDE_MMAP +#ifdef CONFIG_STRICT_DEVMEM +#define USE_LINUX_BDE_MMAP 1 +#else +#define USE_LINUX_BDE_MMAP 0 +#endif +#endif + +#endif /* __KERNEL__ */ + +#endif /* __LINUX_BDE_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/include/linux_dma.h b/platform/broadcom/saibcm-modules/systems/bde/linux/include/linux_dma.h new file mode 100644 index 000000000000..f2621a982cc1 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/include/linux_dma.h @@ -0,0 +1,76 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/*********************************************************************** + * + * $Id: linux_dma.h,v 1.24 Broadcom SDK $ + * $Copyright: (c) 2016 Broadcom Corp. + * All Rights Reserved.$ + * + **********************************************************************/ + +#ifndef __LINUX_DMA_H__ +#define __LINUX_DMA_H__ + +#include + +#ifdef __KERNEL__ + +#ifdef SAL_BDE_XLP +#define KMALLOC(size, flags) __kmalloc(size, flags) +#else +#define KMALLOC(size, flags) kmalloc(size, flags) +#endif + +#if defined(CONFIG_IDT_79EB334) || defined(CONFIG_BCM4702) +/* ioremap is broken in kernel */ +#define IOREMAP(addr, size) ((void *)KSEG1ADDR(addr)) +#else +#define IOREMAP(addr, size) ioremap_nocache(addr, size) +#endif + +#if defined (__mips__) +#if defined(CONFIG_NONCOHERENT_IO) || defined(CONFIG_DMA_NONCOHERENT) +/* Use flush/invalidate for cached memory */ +#define NONCOHERENT_DMA_MEMORY +/* Remap virtual DMA addresses to non-cached segment */ +#define REMAP_DMA_NONCACHED +#endif /* CONFIG_NONCOHERENT_IO || CONFIG_DMA_NONCOHERENT */ +#endif /* __mips__ */ + +#if defined(BCM958525) && (LINUX_VERSION_CODE <= KERNEL_VERSION(3,6,5)) +#define REMAP_DMA_NONCACHED +#endif + +#ifndef DMA_BIT_MASK +#define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) +#endif + +extern void _dma_init(int robo_switch); +extern int _dma_cleanup(void); +extern void _dma_pprint(void); +extern uint32_t *_salloc(int d, int size, const char *name); +extern void _sfree(int d, void *ptr); +extern int _sinval(int d, void *ptr, int length); +extern int _sflush(int d, void *ptr, int length); +extern sal_paddr_t _l2p(int d, void *vaddr); +extern void *_p2l(int d, sal_paddr_t paddr); +extern int _dma_pool_allocated(void); +extern int _dma_range_valid(unsigned long phys_addr, unsigned long size); + +#endif /* __KERNEL__ */ + +#endif /* __LINUX_DMA_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/include/mpool.h b/platform/broadcom/saibcm-modules/systems/bde/linux/include/mpool.h new file mode 100644 index 000000000000..001743d7192a --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/include/mpool.h @@ -0,0 +1,37 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: mpool.h,v 1.2 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +#ifndef __MPOOL_H__ +#define __MPOOL_H__ + +struct mpool_mem_s; +typedef struct mpool_mem_s* mpool_handle_t; + +extern int mpool_init(void); +extern mpool_handle_t mpool_create(void* base_address, int size); +extern void* mpool_alloc(mpool_handle_t pool, int size); +extern void mpool_free(mpool_handle_t pool, void* ptr); +extern int mpool_destroy(mpool_handle_t pool); + +extern int mpool_usage(mpool_handle_t pool); + +#endif /* __MPOOL_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/Makefile b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/Makefile new file mode 100644 index 000000000000..0d126c9a2373 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/Makefile @@ -0,0 +1,115 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.18 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +# Makefile for Linux kernel BDE +# +LOCALDIR = systems/bde/linux/kernel + +# Make sure we build for the kernel if this is a user-mode build +ifneq ($(platform), ) +override-target=linux-$(platform) +endif + +include $(SDK)/make/Make.config + +LIBS = $(LIBDIR)/libkern.a + +BDE = linux-kernel-bde.o + +ifdef ROBO_CHIPS +CFLAGS += -I$(ET_ROBO) -I${SDK}/include/shared/et +ET_ROBO = ${SDK}/systems/drv/et +endif + +# need to add vpath sources +VPATH = ../shared $(ET_ROBO) + +# Add the srcs to be found by vpath +LSRCS += mpool.c +ifdef ROBO_CHIPS +platformsplt = $(subst -, , ${platform}) # change hyphens to spaces +platformbase = $(word 1,${platformsplt}) + +ifeq ($(platformbase), keystone) + LSRCS += etc_robo_spi.c aiutils.c +else + ifeq ($(platformbase), keystone_le) + LSRCS += etc_robo_spi.c aiutils.c + else + ifeq ($(platformbase), iproc) + LSRCS += robo_srab.c robo_spi.c aiutils.c + endif + endif +endif # platformbase + +endif # ROBO_CHIPS + +# Add shared BDE sources +VPATH += ../../shared +LSRCS += shbde_pci.c shbde_iproc.c shbde_mdio.c +CFLAGS += -I../../shared/include + +LHDRS += mpool.h +LOBJS = $(addsuffix .o, $(basename $(LSRCS))) +BOBJS = $(addprefix $(BLDDIR)/,$(LOBJS)) + +ifneq ($(kernel_version),2_4) +KERNEL_MODULE_DIR = kernel_module + +THIS_MOD_NAME := linux-kernel-bde +MODULE = $(LIBDIR)/$(THIS_MOD_NAME).o +KMODULE = $(LIBDIR)/$(THIS_MOD_NAME).ko + +build: kernel_libs $(MODULE) $(KMODULE) +else +MODULE = $(LIBDIR)/linux-kernel-bde.o + +build: kernel_libs $(MODULE) +endif + +$(MODULE): $(BLDDIR)/.tree kernel_libs $(BOBJS) + mkdir -p $(@D) + $(LD) $(MODULE_LDFLAGS) -r -d $(BOBJS) $(LIBS) -o $@ +ifneq ($(kernel_version),2_4) +$(KMODULE): $(MODULE) + rm -fr $(BLDDIR)/$(KERNEL_MODULE_DIR) + mkdir $(BLDDIR)/$(KERNEL_MODULE_DIR) + cp ${SDK}/make/Makefile.linux-kmodule $(BLDDIR)/$(KERNEL_MODULE_DIR)/Makefile + MOD_NAME=$(THIS_MOD_NAME) $(MAKE) -C $(BLDDIR)/$(KERNEL_MODULE_DIR) $(THIS_MOD_NAME).ko +endif + +kernel_libs: + $(MAKE) -C $(SDK)/systems/linux/kernel/modules/shared + +include $(SDK)/make/Make.depend + +# Make.depend is before clean:: so that Make.depend's clean:: runs first. + +clean:: + $(MAKE) -C $(SDK)/systems/linux/kernel/modules/shared $@ + $(RM) $(BOBJS) $(MODULE) + $(RM) $(BLDDIR)/$(KERNEL_MODULE_DIR) + +distclean:: + +ifneq ($(kernel_version),2_4) +.PHONY: build kernel_libs +endif diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux-kernel-bde.c b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux-kernel-bde.c new file mode 100644 index 000000000000..105d3d9bd940 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux-kernel-bde.c @@ -0,0 +1,5173 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: linux-kernel-bde.c,v 1.414 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + * + * Linux Kernel BDE + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "linux_shbde.h" + +#ifdef BCM_ROBO_SUPPORT +/* robo/et related header files */ +#include + +#include + +#if defined(KEYSTONE) +#include +#include +#include +#include +#elif defined(IPROC_CMICD) +#include +#include +#ifdef BCM_STARFIGHTER3_SUPPORT +#include +#endif +#include +#include +#else /* BCM4704 */ +#include +#include +#endif +#endif /* BCM_ROBO_SUPPORT */ + +#define PCI_USE_INT_NONE (-1) +#define PCI_USE_INT_INTX (0) +#define PCI_USE_INT_MSI (1) +#define PCI_USE_INT_MSIX (2) +#ifdef CONFIG_PCI_MSI +#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,110)) +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) +#define msix_table_size(flags) ((flags & PCI_MSIX_FLAGS_QSIZE) + 1) +#endif +#define msi_control_reg(base) (base + PCI_MSI_FLAGS) +#endif +#endif +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("Kernel BDE"); +MODULE_LICENSE("GPL"); + +/* PCIe max payload */ +int maxpayload = 256; +LKM_MOD_PARAM(maxpayload, "i", int, 0); +MODULE_PARM_DESC(maxpayload, +"Limit maximum payload size and request size on PCIe devices"); + +/* Use MSI or MSIX interrupts */ +int usemsi = -1; +LKM_MOD_PARAM(usemsi, "i", int, 0); +MODULE_PARM_DESC(usemsi, +"Use MSI/ MSIX interrupts if supported by kernel"); + +/* Ignore all recognized devices (for debug purposes) */ +int nodevices; +LKM_MOD_PARAM(nodevices, "i", int, 0); +MODULE_PARM_DESC(nodevices, +"Ignore all recognized devices (default no)"); + +/* + * This usually is defined at /usr/include/linux/pci_ids.h + * But this ID is newer. + */ +#ifndef PCI_DEVICE_ID_PLX_9656 +#define PCI_DEVICE_ID_PLX_9656 0x9656 +#endif + +#ifndef PCI_DEVICE_ID_PLX_9056 +#define PCI_DEVICE_ID_PLX_9056 0x9056 +#endif + +/* local defined device IDs, refer to bcmdevs.h */ +#ifndef BCM53000_GMAC_ID +#define BCM53000_GMAC_ID 0x4715 /* 53003 gmac id */ +#endif +#ifndef BCM53010_GMAC_ID +#define BCM53010_GMAC_ID 0x4715 /* 5301x gmac id */ +#endif +#ifndef BCM47XX_ENET_ID +#define BCM47XX_ENET_ID 0x4713 /* 4710 enet */ +#endif +#ifndef BCM53010_CHIP_ID +#define BCM53010_CHIP_ID 0xcf12 /* 53010 chipcommon chipid */ +#endif +#ifndef BCM53018_CHIP_ID +#define BCM53018_CHIP_ID 0xcf1a /* 53018 chipcommon chipid */ +#endif +#ifndef BCM53020_CHIP_ID +#define BCM53020_CHIP_ID 0xcf1e /* 53020 chipcommon chipid */ +#endif + +/* For 2.4.x kernel support */ +#ifndef IRQF_SHARED +#define IRQF_SHARED SA_SHIRQ +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) +typedef unsigned long resource_size_t; +#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) */ + +#ifdef BCM_ICS +#define BCM_ICS_CMIC_BASE 0x08000000 +#else + +/* Force interrupt line */ +static int forceirq = -1; +static uint32_t forceirqubm = 0xffffffff; +LKM_MOD_PARAM(forceirq, "i", int, 0); +LKM_MOD_PARAM(forceirqubm, "i", uint, 0); +MODULE_PARM_DESC(forceirq, +"Override IRQ line assigned by boot loader"); +MODULE_PARM_DESC(forceirqubm, +"Bitmap for overriding the IRQ line assigned by boot loader for given units"); + +/* Create SPI slave device (cannot be probed) */ +static uint32_t spi_devid = 0; +LKM_MOD_PARAM(spi_devid, "i", uint, 0); +MODULE_PARM_DESC(spi_devid, +"Create SPI slave device using this device ID"); + +/* Select SPI device revision (cannot be probed) */ +static uint32_t spi_revid = 1; +LKM_MOD_PARAM(spi_revid, "i", uint, 0); +MODULE_PARM_DESC(spi_revid, +"Select device revision for SPI slave device"); + +#endif /* BCM_ICS */ + +/* Debug output */ +static int debug; +LKM_MOD_PARAM(debug, "i", int, 0); +MODULE_PARM_DESC(debug, +"Set debug level (default 0"); +/* Use high memory for DMA */ + +/* module param for probing EB devices. */ +static char *eb_bus; +LKM_MOD_PARAM(eb_bus, "s", charp, 0); +MODULE_PARM_DESC(eb_bus, +"List of EB devices on platform. Input format (BA=%x IRQ=%d RD16=%d WR16=%d"); + +#ifdef KEYSTONE +/* Force SPI Frequency */ +static int spifreq = 0; +LKM_MOD_PARAM(spifreq, "i", int, 0); +MODULE_PARM_DESC(spifreq, +"Force SPI Frequency for Keystone CPU (0 for default frequency)"); +#endif + +#if defined(BCM_EA_SUPPORT) +#if defined(BCM_TK371X_SUPPORT) +static int eadevices; +LKM_MOD_PARAM(eadevices, "i", int, 0); +MODULE_PARM_DESC(eadevices, +"Number of TK371X devices"); +#endif /* */ +#endif /* BCM_EA_SUPPORT */ + +/* Compatibility */ +#ifdef LKM_2_4 +#define _ISR_RET void +#define _ISR_PARAMS(_i,_d,_r) int _i, void *_d, struct pt_regs *_r +#define IRQ_NONE +#define IRQ_HANDLED +#define SYNC_IRQ(_i) synchronize_irq() +#else /* LKM_2_6 */ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,31)) +#define _ISR_RET irqreturn_t +#else +#define _ISR_RET int +#endif +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,19)) +#define _ISR_PARAMS(_i,_d,_r) int _i, void *_d +#else +#define _ISR_PARAMS(_i,_d,_r) int _i, void *_d, struct pt_regs *_r +#endif +#define SYNC_IRQ(_i) synchronize_irq(_i) +char * ___strtok; +char * strtok(char * s,const char * ct) +{ + char *sbegin, *send; + sbegin = s ? s : ___strtok; + if (!sbegin) { + return NULL; + } + sbegin += strspn(sbegin,ct); + if (*sbegin == '\0') { + ___strtok = NULL; + return( NULL ); + } + send = strpbrk( sbegin, ct); + if (send && *send != '\0') + *send++ = '\0'; + ___strtok = send; + return (sbegin); +} +LKM_EXPORT_SYM(___strtok); +LKM_EXPORT_SYM(strtok); +#endif /* LKM_2_x */ + +/* PCIe capabilities */ +#ifndef PCI_CAP_ID_EXP +#define PCI_CAP_ID_EXP 0x10 +#endif +#ifndef PCI_EXP_DEVCAP +#define PCI_EXP_DEVCAP 4 +#endif +#ifndef PCI_EXP_DEVCTL +#define PCI_EXP_DEVCTL 8 +#endif +#ifndef PCI_EXT_CAP_START +#define PCI_EXT_CAP_START 0x100 +#endif +#ifndef PCI_EXT_CAP_ID +#define PCI_EXT_CAP_ID(_hdr) (_hdr & 0x0000ffff) +#endif +#ifndef PCI_EXT_CAP_VER +#define PCI_EXT_CAP_VER(_hdr) ((_hdr >> 16) & 0xf) +#endif +#ifndef PCI_EXT_CAP_NEXT +#define PCI_EXT_CAP_NEXT(_hdr) ((_hdr >> 20) & 0xffc) +#endif +#ifndef PCI_EXT_CAP_ID_VNDR +#define PCI_EXT_CAP_ID_VNDR 0x0b +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) +#define PCI_FIND_DEV(_d, _v, _fr) pci_find_device(_d, _v, _fr) +#else +#define PCI_FIND_DEV(_d, _v, _fr) pci_get_device(_d, _v, _fr) +#endif + +#if defined(CONFIG_RESOURCES_64BIT) || defined(CONFIG_PHYS_ADDR_T_64BIT) +#define PHYS_ADDR_IS_64BIT +#endif + +/* Structure of private SPI device */ +struct spi_dev { + uint8 cid; /* Chip ID */ + uint32 part; /* Part number of the chip */ + uint8 rev; /* Revision of the chip */ + void *robo; /* ptr to robo info required to access SPI */ + unsigned short phyid_high; /* PHYID HIGH in MII regs of detected chip */ + unsigned short phyid_low; /* PHYID LOW in MII regs of detected chip */ +}; + +struct bde_spi_device_id { + unsigned short phyid_high; /* PHYID HIGH in MII regs of detected chip */ + unsigned short phyid_low; /* PHYID LOW in MII regs of detected chip */ + uint32 model_info; + uint32 rev_info; + uint32 spifreq; +}; + +/* Control Data */ +typedef struct bde_ctrl_s { + struct list_head list; + + /* Specify the type of device, pci, spi, switch, ether ... */ + uint32 dev_type; + + int domain_no; + int bus_no; + int be_pio; + int use_msi; +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) + struct msix_entry *entries; +#endif + int msix_cnt; + union { + /* Linux PCI device pointer */ + struct pci_dev* _pci_dev; + + /* SPI device pointer */ + struct spi_dev* _spi_dev; + } dev; +#define pci_device dev._pci_dev +#define spi_device dev._spi_dev + +#ifdef LINUX_BDE_DMA_DEVICE_SUPPORT + struct device *dma_dev; +#endif + + /* Physical addresses */ + resource_size_t phys_address; + resource_size_t phys_address1; + resource_size_t phys_address2; + + /* Secondary mapped base address */ + sal_vaddr_t alt_base_addr; + + /* BDE device description */ + ibde_dev_t bde_dev; + + /* Interrupt Handling */ + int iLine; /* Interrupt line */ + void (*isr)(void *); + void *isr_data; + + /* + * Controls to allow two drivers to share a single set of + * hardware registers. Typically a kernel driver will handle + * a subset of hardware interrupts and a user mode driver + * will handle the remaining interrupts. + */ + void (*isr2)(void *); + void *isr2_data; + uint32_t fmask; /* Interrupts controlled by secondary handler */ + uint32_t imask; /* Enabled interrupts for primary handler */ + uint32_t imask2; /* Enabled interrupts for secondary handler */ + spinlock_t lock; /* Lock for IRQ mask synchronization */ + + /* Hardware abstraction for shared BDE functions */ + shbde_hal_t shbde; + + /* Device state : BDE_DEV_STATE_REMOVED/CHANGED */ + uint32 dev_state; + + /* inst_id */ + uint32 inst_id; +} bde_ctrl_t; + +static bde_ctrl_t _devices[LINUX_BDE_MAX_DEVICES]; +static int _ndevices = 0; +static int _switch_ndevices = 0; +static int _ether_ndevices = 0; +static int _cpu_ndevices = 0; +static int robo_switch = 0; + +#define VALID_DEVICE(_n) ((_n >= 0) && (_n < _ndevices)) + +/* CPU MMIO area used with CPU cards provided on demo boards */ +#if (defined(BCM_PETRA_SUPPORT) || defined(BCM_DFE_SUPPORT) || defined(BCM_DNX_SUPPORT) || defined(BCM_DNXF_SUPPORT)) && (defined(__DUNE_WRX_BCM_CPU__) || defined(__DUNE_GTO_BCM_CPU__)) +static void *cpu_address = NULL; +#endif + +#ifdef BCM_ROBO_SUPPORT + +/* for SPI access via bcm4710 core */ +static void *robo = NULL; +static void *sbh = NULL; + +#ifdef ALTA_ROBO_SPI + +extern void *alta_eth_spi_ctrl; + +extern int +robo_spi_read(void *cookie, uint16_t reg, uint8_t *buf, int len); + +extern int +robo_spi_write(void *cookie, uint16_t reg, uint8_t *buf, int len); + +#define ROBO_RREG(_robo, _dev, _page, _reg, _buf, _len) \ + robo_spi_read(_dev ? NULL : alta_eth_spi_ctrl, \ + (_page << 8) | (_reg), _buf, _len) +#define ROBO_WREG(_robo, _dev, _page, _reg, _buf, _len) \ + robo_spi_write(_dev ? NULL : alta_eth_spi_ctrl, \ + (_page << 8) | (_reg), _buf, _len) + +#else /* !ALTA_ROBO_SPI */ + +#if defined(KEYSTONE) || defined(IPROC_CMICD) +#define ROBO_RREG(_robo, _dev, _page, _reg, _buf, _len) \ + robo_rreg(_robo, _dev, _page, _reg, _buf, _len) +#define ROBO_WREG(_robo, _dev, _page, _reg, _buf, _len) \ + robo_wreg(_robo, _dev, _page, _reg, _buf, _len) +#else +#define ROBO_RREG(_robo, _dev, _page, _reg, _buf, _len) +#define ROBO_WREG(_robo, _dev, _page, _reg, _buf, _len) +#endif + +#endif /* ALTA_ROBO_SPI */ + +#endif /* BCM_ROBO_SUPPORT */ + +/* Broadcom BCM4704 */ +#define BCM4704_VENDOR_ID 0x14E4 +#define BCM4704_DEVICE_ID 0x4704 + +/* SiByte PCI Host */ +#define SIBYTE_PCI_VENDOR_ID 0x166D +#define SIBYTE_PCI_DEVICE_ID 0x0001 + +/* Intel 21150 PCI-PCI Bridge */ +#define DC21150_VENDOR_ID 0x1011 +#define DC21150_DEVICE_ID 0x0022 + +/* HiNT HB4 PCI-PCI Bridge (21150 clone) */ +#define HINT_HB4_VENDOR_ID 0x3388 +#define HINT_HB4_DEVICE_ID 0x0022 + +/* Pericom PI7C8150 PCI-PCI Bridge (21150 clone) */ +#define PI7C8150_VENDOR_ID 0x12D8 +#define PI7C8150_DEVICE_ID 0x8150 + +/* Pericom PI7C9X130 PCI-PCIE Bridge */ +#define PCI_VNDID_PERICOM 0x12D8 +#define PCI_DEVID_PI7C9X130 0xE130 +#define DEV_CTRL_REG 0xb8 + +#define MAX_PAYLOAD_256B (1 << 5) +#define MAX_PAYLOAD_512B (2 << 5) +#define MAX_READ_REQ_256B (1 << 12) + + +/* Freescale 8548 PCI-E host Bridge */ +#define FSL_VENDOR_ID 0x1957 +#define FSL8548PCIE_DEVICE_ID 0x0013 +#define FSL2020EPCIE_DEVICE_ID 0x0070 +#define FSL8548PCIE_DEV_CTRL_REG 0x54 + +/* 4716 PCI-E host Bridge */ +#define BCM4716_VENDOR_ID 0x14e4 +#define BCM4716PCIE_DEVICE_ID 0x4716 +#define BCM4716PCIE_DEV_CAP_REG 0xd4 +#define BCM4716PCIE_DEV_CTRL_REG 0xd8 +#define BCM53000_VENDOR_ID 0x14e4 +#define BCM53000PCIE_DEVICE_ID 0x5300 + +#define BCM53000PCIE_DEV(port) ((port == 0) ? pcie0 : pcie1) +#define BCM53000PCIE_BASE(port) ((port == 0) ? 0xb8005000 : 0xb800e000) +#define BCM53000PCIE_FUNC0_COFIG_SPACE 0x400 +#define BCM53000PCIE_SROM_SPACE 0x800 +#define BCM53000PCIE_DEV_CAP_REG 0xd4 +#define BCM53000PCIE_DEV_CTRL_REG 0xd8 +#define BCM53000PCIE_MAX_PAYLOAD_MASK 0x7 +#define BCM53000PCIE_CAP_MAX_PAYLOAD_256B (1 << 0) +#define BCM53000PCIE_DEFAULT_STATUS 0x00100146 + +/* 16bit wide register. offset 14, 14*2 = 0x1c */ +#define BCM53000PCIE_SPROM_OFFSET 0x1c +/* bit 15:13 spromData.MaxPayloadSize. 1: 256 bytes */ +#define BCM53000PCIE_SPROM_MAX_PAYLOAD_MASK 0xe000 +#define BCM53000PCIE_SPROM_MAX_PAYLOAD_256B (1 << 13) + + +/* Intel 21150, HiNT HB4 and other 21150-compatible */ +#define PCI_CFG_DEC21150_SEC_CLK 0x68 + +#define BCM4704_ENUM_BASE 0x18000000 +#define BCM4704_MEMC_BASE (BCM4704_ENUM_BASE+0x8000) +#define BCM4704_MEMC_PRIORINV 0x18 + +/* PLX PCI-E Switch */ +#define PLX_PEX8608_DEV_ID 0x8608 +#define PLX_PEX8617_DEV_ID 0x8617 +#define PLX_PEX86XX_DEV_CTRL_REG 0x70 + +/* Broadcom BCM58525 */ +#define BCM58525_PCI_VENDOR_ID 0x14E4 +#define BCM58525_PCI_DEVICE_ID 0x8025 +#define BCM58522_PCI_DEVICE_ID 0x8022 + +/* Broadcom BCM58712 */ +#define BCM58712_PCI_VENDOR_ID 0x14E4 +#define BCM58712_PCI_DEVICE_ID 0x168E + +static uint32_t _read(int d, uint32_t addr); + +#ifdef BCM_ICS +#else +/* Used to determine overall memory limits across all devices */ +static uint32_t _pci_mem_start = 0xFFFFFFFF; +static uint32_t _pci_mem_end = 0; + +/* Used to control MSI interrupts */ +static int use_msi = 0; +#endif + +#ifdef BCM_PLX9656_LOCAL_BUS + +#define CPLD_OFFSET 0x00800000 +#define CPLD_REVISION_REG 0x0000 +#define CPLD_REVISION_MASK 0xffff +#define CPLD_RESET_REG 0x0004 +#define CPLD_RESET_NONE 0x0000 + +#define PL0_OFFSET 0x00800000 +#define PL0_SIZE 0x00040000 +#define PL0_REVISION_REG 0x0000 + +/* Assume there's only one PLX PCI-to-Local bus bridge if any */ +static bde_ctrl_t plx_ctrl; +static int num_plx = 0; + +#endif /* BCM_PLX9656_LOCAL_BUS */ + +static spinlock_t bus_lock; + +static int +_parse_eb_args(char *str, char * format, ...) + __attribute__ ((format (scanf, 2, 3))); + +static int +_parse_eb_args(char *str, char * format, ...) +{ + va_list args; + + va_start(args, format); + vsscanf(str, format, args); + va_end(args); + + return 0; +} + +static int +_eb_device_create(resource_size_t paddr, int irq, int rd_hw, int wr_hw) +{ + bde_ctrl_t *ctrl; + uint32 dev_rev_id = 0x0, dev_id; + + dev_id = _ndevices; + + ctrl = _devices + _ndevices++; + _switch_ndevices++; + + ctrl->dev_type |= BDE_EB_DEV_TYPE | BDE_SWITCH_DEV_TYPE; + ctrl->pci_device = NULL; /* No PCI bus */ + + if(rd_hw) { + ctrl->dev_type |= BDE_DEV_BUS_RD_16BIT; + } + + if (wr_hw) { + ctrl->dev_type |= BDE_DEV_BUS_WR_16BIT; + } + + /* Map in the device */ + ctrl->bde_dev.base_address = (sal_vaddr_t)IOREMAP(paddr, 0x10000); + ctrl->phys_address = paddr; + + dev_rev_id = _read(dev_id, 0x178); /* CMIC_DEV_REV_ID */ + + ctrl->bde_dev.device = dev_rev_id & 0xFFFF; + ctrl->bde_dev.rev = (dev_rev_id >> 16) & 0xFF; + + ctrl->iLine = irq; + ctrl->isr = NULL; + ctrl->isr_data = NULL; + + gprintk("Created EB device at BA=%x IRQ=%d RD16=%d WR16=%d device=0x%x\n", + (unsigned int)paddr, irq, rd_hw, wr_hw, ctrl->bde_dev.device); + + return 0; +} + +#if defined(BCM_PETRA_SUPPORT) || defined(BCM_DFE_SUPPORT) || defined(BCM_DNX_SUPPORT) || defined(BCM_DNXF_SUPPORT) + +#include + +static int +sand_device_create(void) +{ + bde_ctrl_t* ctrl; + + ctrl = _devices; /* FIX_ME: on petra, take first device */ + +#ifndef __DUNE_LINUX_BCM_CPU_PCIE__ + _switch_ndevices++; + _ndevices++; + + ctrl->dev_type |= BDE_PCI_DEV_TYPE | BDE_SWITCH_DEV_TYPE; + ctrl->pci_device = NULL; /* No PCI bus */ + + /* Map in the device */ /* FIX_ME: not realy map anything */ + ctrl->bde_dev.base_address = (sal_vaddr_t)IOREMAP(0x40000000, 0x100000); + ctrl->phys_address = 0x40000000; + + ctrl->iLine = 0; + ctrl->isr = NULL; + ctrl->isr_data = NULL; + + ctrl->bde_dev.device = BCM88950_DEVICE_ID; + ctrl->bde_dev.rev = BCM88950_A0_REV_ID; +#endif + + /* Map CPU regs */ +#ifdef __DUNE_WRX_BCM_CPU__ + cpu_address = IOREMAP(0x18000000, 0x4000000); +#elif defined(__DUNE_GTO_BCM_CPU__) + cpu_address = IOREMAP(0xe0000000, 0x100000); +#endif + + if ((ctrl->bde_dev.device == PCP_PCI_DEVICE_ID)) { + ctrl->bde_dev.device = GEDI_DEVICE_ID; + ctrl->bde_dev.rev = GEDI_REV_ID; + } + + if ((ctrl->bde_dev.device == ACP_PCI_DEVICE_ID)) { + ctrl->dev_type |= BDE_PCI_DEV_TYPE | BDE_SWITCH_DEV_TYPE; + } + + return 0; +} +#endif + +#ifdef IPROC_CMICD +static void +iproc_cmicd_get_irqres(ibde_dev_t bde_dev, struct resource *res_irq) +{ + shbde_iproc_config_t iproc_config, *icfg = &iproc_config; + + /* iProc configuration parameters */ + memset(icfg, 0, sizeof(*icfg)); + shbde_iproc_config_init(icfg, bde_dev.device, bde_dev.rev); + + if ((icfg->iproc_ver == 0) && (debug >= 1)) { + gprintk("Unable to determine iProc version\n"); + } + + if (icfg->iproc_ver == 7) { + res_irq->start = 221; + } else if (icfg->iproc_ver == 10) { + res_irq->start = 184; + } + +} + +#include +#include + +extern void iproc_platform_driver_register(struct platform_driver *drv); +extern void iproc_platform_driver_unregister(struct platform_driver *drv); +extern void iproc_platform_device_register(struct platform_device *drv); +extern void iproc_platform_device_unregister(struct platform_device *drv); + +extern struct resource * +iproc_platform_get_resource(struct platform_device *dev, unsigned int type, + unsigned int num); + +#define IPROC_CHIPCOMMONA_BASE 0x18000000 +#define IPROC_CMICD_BASE 0x48000000 +#define IPROC_CMICD_SIZE 0x40000 +#define IPROC_CMICD_INT 194 + +#define IPROC_CMICD_COMPATIBLE "brcm,iproc-cmicd" + +static int +iproc_cmicd_probe(struct platform_device *pldev) +{ + bde_ctrl_t *ctrl; + uint32 size, dev_rev_id; + struct resource *memres, *irqres; +#ifdef CONFIG_OF + if (debug >= 1) { + gprintk("iproc_cmicd_probe %s\n", pldev->dev.of_node ? "with device node":""); + } +#endif + memres = iproc_platform_get_resource(pldev, IORESOURCE_MEM, 0); + if (memres == NULL) { + gprintk("Unable to retrieve iProc CMIC resources"); + return -1; + } + size = memres->end - memres->start + 1; + + ctrl = _devices + _ndevices++; + _switch_ndevices++; + + ctrl->dev_type = BDE_AXI_DEV_TYPE | BDE_SWITCH_DEV_TYPE | BDE_256K_REG_SPACE; + ctrl->pci_device = NULL; /* No PCI bus */ + + /* Map CMIC block in the AXI memory space into CPU address space */ + ctrl->bde_dev.base_address = (sal_vaddr_t)IOREMAP(memres->start, size); + if (!ctrl->bde_dev.base_address) { + gprintk("Error mapping iProc CMIC registers"); + return -1; + } + ctrl->phys_address = memres->start; + + /* Read switch device ID from CMIC */ + dev_rev_id = *((uint32_t*)(ctrl->bde_dev.base_address + 0x10224)); +#if defined(BCM_CMICM_SUPPORT) && defined(BE_HOST) + ctrl->bde_dev.device = ( (((dev_rev_id >> 16) & 0xff) << 8) | + ((dev_rev_id >> 24) & 0xff)); + ctrl->bde_dev.rev = (dev_rev_id >> 8) & 0xff ; +#else + ctrl->bde_dev.device = dev_rev_id & 0xffff; + ctrl->bde_dev.rev = (dev_rev_id >> 16) & 0xff; +#endif + +#ifdef CONFIG_OF + if (!pldev->dev.of_node) +#endif + { + /* Assign locally if not available from device node */ + iproc_cmicd_get_irqres(ctrl->bde_dev, &pldev->resource[0]); + } + irqres = iproc_platform_get_resource(pldev, IORESOURCE_IRQ, 0); + + ctrl->iLine = irqres->start; + + ctrl->isr = NULL; + ctrl ->isr_data = NULL; + +#ifdef LINUX_BDE_DMA_DEVICE_SUPPORT + ctrl->dma_dev = &pldev->dev; +#endif + + /* Let's boogie */ + return 0; +} + +static int +iproc_cmicd_remove(struct platform_device *pldev) +{ + return 0; +} +#ifdef CONFIG_OF +static const struct of_device_id iproc_cmicd_of_match[] = { + { .compatible = "brcm,iproc-cmicd" }, + {}, +}; +MODULE_DEVICE_TABLE(of, iproc_cmicd_of_match); +#endif +static char iproc_cmicd_string[] = "bcmiproc-cmicd"; + +static struct platform_driver iproc_cmicd_driver = +{ + .probe = iproc_cmicd_probe, + .remove = iproc_cmicd_remove, + .driver = + { + .name = iproc_cmicd_string, + .owner = THIS_MODULE, +#ifdef CONFIG_OF + .of_match_table = iproc_cmicd_of_match, +#endif + }, +}; + +typedef enum { + IPROC_CMICD_RES_INTR = 0, + IPROC_CMICD_RES_MEM +} IPROC_CMICD_RES_E; + +static struct resource iproc_cmicd_resources[] = { + [IPROC_CMICD_RES_INTR] = { + .flags = IORESOURCE_IRQ, + .start = IPROC_CMICD_INT, + }, + [IPROC_CMICD_RES_MEM] = { + .flags = IORESOURCE_MEM, + .start = IPROC_CMICD_BASE, + .end = IPROC_CMICD_BASE+IPROC_CMICD_SIZE-1, + }, +}; + +static void +iproc_cmicd_release(struct device *dev) +{ +} + +static u64 iproc_cmicd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device iproc_cmicd_pdev = { + .name = iproc_cmicd_string, + .id = 0, + .dev = { + .release = iproc_cmicd_release, + .init_name = iproc_cmicd_string, + .dma_mask = &iproc_cmicd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = iproc_cmicd_resources, + .num_resources = ARRAY_SIZE(iproc_cmicd_resources), +}; + +static int +iproc_has_cmicd(void) +{ + void *iproc_cca_base; + uint32 cca_cid; + + /* Read ChipcommonA chip id register to identify current SOC */ + iproc_cca_base = IOREMAP(IPROC_CHIPCOMMONA_BASE, 0x3000); + if (iproc_cca_base == NULL) { + gprintk("iproc_has_cmicd: ioremap of ChipcommonA registers failed"); + return 0; + } + cca_cid = readl((uint32 *)iproc_cca_base); + cca_cid &= 0xffff; + iounmap(iproc_cca_base); + + /* Only allowed accessing CMICD module if the SOC has it */ + switch (cca_cid) { + case BCM53010_CHIP_ID: + case BCM53018_CHIP_ID: + case BCM53020_CHIP_ID: + return 0; + default: + break; + } + + /* Device has CMIC */ + return 1; +} + +#define IPROC_CHIPCOMMONA_EROM_PTR_OFFSET (0x180000fc) +#define EROM_MAX_SIZE (0x1000) +#define EROM_PARTNUM_CMICD (0x14) + +#define EROM_DESC_COMPIDENT (0x1) +#define EROM_DESC_MASTER (0x3) +#define EROM_DESC_ADDR (0x5) +#define EROM_DESC_END (0xF) +#define EROM_DESC_EMPTY (0) + +#define EROM_IS_DESC_COMPIDENT(x) ((x & 0x7) == EROM_DESC_COMPIDENT) +#define EROM_IS_DESC_MASTER(x) ((x & 0x7) == EROM_DESC_MASTER) +#define EROM_IS_DESC_ADDR(x) ((x & 0x7) == EROM_DESC_ADDR) +#define EROM_IS_DESC_END(x) ((x & 0xF) == EROM_DESC_END) + +#define EROM_GET_PARTNUM(x) ((x >> 8) & (0xFFF)) /* Bit 8~19 */ +#define EROM_GET_ADDRESS(x) ((x >> 12) & (0xFFFFF)) /* Bit 12~31 */ +#define EROM_GET_SIZETYPE(x) ((x >> 4) & (0x3)) /* Bit 4~5 */ +#define EROM_GET_AG32(x) ((x >> 3) & (0x1)) /* Bit 3 */ +#define EROM_GET_SIZE(x) ((x >> 12) & (0xFFFFF)) /* Bit 12~31 */ +#define EROM_GET_SG32(x) ((x >> 3) & (0x1)) /* Bit 3 */ + +#define EROM_ADDR_SIZETYPE_4K (0) +#define EROM_ADDR_SIZETYPE_8K (1) +#define EROM_ADDR_SIZETYPE_16K (2) +#define EROM_ADDR_SIZETYPE_MORE (3) + +#define EROM_ADDR_FLAG_AG32 (1) /* Address space greater than 32 bit */ +#define EROM_ADDR_FLAG_SIZE (2) /* Addition size descriptor */ +#define EROM_ADDR_FLAG_SG32 (4) /* Size descriptor greater than 32 bit */ + +static void +iproc_cmicd_get_memregion(struct resource *res_mem) +{ + void *erom_ptr_oft; + uint32_t erom_phy_addr; + uint32_t *erom_base; + uint32_t i = 0; + uint32_t word = 0; + uint8_t more_addr_word = 0; /* bit 0: AG32; bit 1: SIZE; bit 2: SG32 */ + uint8_t found_cmicd_dev = 0; + uint8_t size_type = 0; + bool is_compident_a = 1; /* 1: CompidentA; o/w: CompidentB */ + + erom_ptr_oft = IOREMAP(IPROC_CHIPCOMMONA_EROM_PTR_OFFSET, 0x100); + + erom_phy_addr = readl((uint32 *)(erom_ptr_oft)); + iounmap(erom_ptr_oft); + + erom_base = IOREMAP(erom_phy_addr, EROM_MAX_SIZE); + + while (1) { + word = readl((uint32 *)(erom_base + i)); + + if (EROM_IS_DESC_ADDR(word) || more_addr_word) { + if (more_addr_word == 0) { /* Normal Addr Desc */ + if (EROM_GET_AG32(word) == 1) { + more_addr_word |= EROM_ADDR_FLAG_AG32; + } + + size_type = EROM_GET_SIZETYPE(word); + if (size_type == EROM_ADDR_SIZETYPE_MORE) { + more_addr_word |= EROM_ADDR_FLAG_SIZE; + } + + if (found_cmicd_dev == 1) { + res_mem->start = EROM_GET_ADDRESS(word) << 12; + if (size_type < EROM_ADDR_SIZETYPE_MORE) { + res_mem->end = res_mem->start + 4096 * (1 << size_type) - 1; + } + } + } + else if (more_addr_word & EROM_ADDR_FLAG_AG32) { /* UpperAddr Desc */ + more_addr_word &= ~EROM_ADDR_FLAG_AG32; + + if (found_cmicd_dev == 1) { + /* res_mem->start |= word << 32; */ + gprintk("Expect cmicd address to be 32-bit\n"); + } + } + else if (more_addr_word & EROM_ADDR_FLAG_SIZE) { /* Size Desc */ + if (EROM_GET_SG32(word) == 1) { + more_addr_word |= EROM_ADDR_FLAG_SG32; + } + + more_addr_word &= ~EROM_ADDR_FLAG_SIZE; + + if (found_cmicd_dev == 1) { + res_mem->end = res_mem->start + (EROM_GET_SIZE(word) << 12) - 1; + } + } + else if (more_addr_word & EROM_ADDR_FLAG_SG32) { /* UpperSize Desc */ + more_addr_word &= ~EROM_ADDR_FLAG_SG32; + + if (found_cmicd_dev == 1) { + /* res_mem->end += (word) << 32; */ + gprintk("Expect cmicd size to be 32-bit\n"); + } + } + + if (found_cmicd_dev == 1 && more_addr_word == 0) { + break; /* We have gotten all necessary information, exit the loop */ + } + } + else if (EROM_IS_DESC_COMPIDENT(word)) { + if (is_compident_a == 1) { + if (EROM_GET_PARTNUM(word) == EROM_PARTNUM_CMICD) { + found_cmicd_dev = 1; + } + } + + is_compident_a = 1 - is_compident_a; + } + else if (EROM_IS_DESC_END(word)) { + break; + } + + i++; + } + iounmap(erom_base); + + if (debug >= 1) { + gprintk("CMICD info by %s: cmicd_mem.start=%x, cmicd_mem.end=%x\n", + found_cmicd_dev ? "EROM" : "Default", + iproc_cmicd_resources[IPROC_CMICD_RES_MEM].start, + iproc_cmicd_resources[IPROC_CMICD_RES_MEM].end); + } +} +#endif /* IPROC_CMICD */ + +#ifdef BCM_ICS +static int +_ics_bde_create(void) +{ + bde_ctrl_t *ctrl; + uint32 dev_rev_id = 0x0; + resource_size_t paddr; + + if (_ndevices == 0) { + ctrl = _devices + _ndevices++; + _switch_ndevices++; + + ctrl->dev_type |= BDE_ICS_DEV_TYPE | BDE_SWITCH_DEV_TYPE; + ctrl->pci_device = NULL; /* No PCI bus */ + + /* Map in the device */ + paddr = BCM_ICS_CMIC_BASE; + ctrl->bde_dev.base_address = (sal_vaddr_t)IOREMAP(paddr, 0x10000); + ctrl->phys_address = paddr; + + dev_rev_id = *((unsigned int *)(KSEG1ADDR(paddr + 0x178))); + + ctrl->bde_dev.device = dev_rev_id & 0xFFFF; + ctrl->bde_dev.rev = (dev_rev_id >> 16) & 0xFF; + + ctrl->iLine = 5; /* From raptor linux BSP */ + + ctrl->isr = NULL; + ctrl->isr_data = NULL; + printk("Created ICS device ..%x\n", ctrl->bde_dev.base_address); + } + + return 0; +} + +#else /* !BCM_ICS */ + +extern struct pci_bus *pci_find_bus(int domain, int busnr); + +/* + * PCI device table. + * Populated from the include/soc/devids.h file. + */ + +static struct pci_device_id _id_table[] = { + { BROADCOM_VENDOR_ID, BCM5675_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM5676_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56218X_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56218_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56219_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56218R_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56219R_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56214_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56215_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56214R_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56215R_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56216_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56217_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56212_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56213_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56230_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56231_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53718_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53714_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53716_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56018_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56014_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56224_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56225_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56226_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56227_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56228_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56229_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56024_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56025_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53724_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53726_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56100_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56101_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56102_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56105_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56106_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56107_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56110_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56111_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56112_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56115_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56116_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56117_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56300_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56301_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56302_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56303_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56304_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56404_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56305_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56306_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56307_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56308_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56309_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56310_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56311_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56312_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56313_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56314_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56315_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56316_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56317_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56318_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56319_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, +#ifndef EXCLUDE_BCM56324 + { BROADCOM_VENDOR_ID, BCM56322_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56324_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, +#endif /* EXCLUDE_BCM56324 */ + { BROADCOM_VENDOR_ID, BCM53312_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53313_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53314_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53324_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53333_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53334_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53342_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53343_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53344_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53346_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53347_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53393_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53394_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53300_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53301_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53302_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56500_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56501_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56502_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56503_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56504_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56505_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56506_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56507_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56508_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56509_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56510_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56511_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56512_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56513_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56514_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56516_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56517_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56518_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56519_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56580_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56620_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56624_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56626_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56628_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56629_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56680_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56684_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56700_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56701_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56720_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56721_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56725_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56800_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56801_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56802_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56803_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56820_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56821_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56822_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56823_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56825_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56630_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56634_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56636_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56638_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56639_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56538_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56520_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56521_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56522_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56524_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56526_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56534_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56685_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56689_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56331_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56333_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56334_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56338_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56320_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56321_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56132_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56134_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88732_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56140_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56142_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56143_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56144_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56146_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56147_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56149_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56150_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56151_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56152_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56613_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56930_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56931_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56935_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56936_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56939_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56840_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56841_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56842_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56843_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56844_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56845_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56846_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56847_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56549_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56053_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56838_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56831_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56835_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56849_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56742_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56743_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56744_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56745_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56746_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56640_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56548_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56547_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56346_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56345_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56344_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56342_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56340_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56049_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56048_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56047_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56042_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56041_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56040_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56643_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56644_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56648_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56649_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56540_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56541_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56542_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56543_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56544_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56545_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56546_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56044_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56045_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56046_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88230_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88030_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88034_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88039_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88231_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88235_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88236_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88239_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM55440_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56440_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56441_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56442_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56443_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56445_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56446_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56447_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56448_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56449_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56240_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56241_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56242_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56243_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56245_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56246_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM55450_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM55455_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56260_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56270_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56271_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56272_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53460_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53461_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56261_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56262_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56263_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56265_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56266_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56267_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56268_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56233_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56460_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56461_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56462_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56463_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56465_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56466_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56467_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56468_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56246_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56248_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56450_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56452_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56454_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56455_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56456_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56457_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56458_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56850_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56851_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56852_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56853_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56854_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56855_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56834_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56750_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56830_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM55440_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM55441_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56060_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56062_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56063_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56064_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56065_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56066_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53401_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53411_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53402_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53412_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53403_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53413_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53404_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53414_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53405_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53415_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53406_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53416_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53408_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53418_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53454_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53455_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53456_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53457_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53422_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53424_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53426_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53365_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53369_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56960_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56961_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56962_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56963_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56930_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56968_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56970_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56971_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56972_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56974_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56168_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56169_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56560_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56561_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56562_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56565_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56566_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56567_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56568_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56760_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56762_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56764_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56765_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56766_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56768_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56069_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56068_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56160_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56162_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56163_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56164_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56166_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53440_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53443_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53442_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53434_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56965_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56969_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56966_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56967_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56170_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56172_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56174_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53570_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM53575_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, +#ifdef BCM_ROBO_SUPPORT + { BROADCOM_VENDOR_ID, BCM47XX_ENET_ID, PCI_ANY_ID, PCI_ANY_ID }, +#ifdef KEYSTONE + { BROADCOM_VENDOR_ID, BCM53000_GMAC_ID, PCI_ANY_ID, PCI_ANY_ID }, +#endif +#endif + { SANDBURST_VENDOR_ID, QE2000_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { SANDBURST_VENDOR_ID, BCM88020_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { SANDBURST_VENDOR_ID, BCM88025_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9656, PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056, PCI_ANY_ID, PCI_ANY_ID }, + { BCM53000_VENDOR_ID, BCM53000PCIE_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, +#ifdef BCM_PETRA_SUPPORT + { BROADCOM_VENDOR_ID, BCM88650_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88350_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88351_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88450_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88451_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88550_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88551_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88552_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88651_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88654_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { PCP_PCI_VENDOR_ID, PCP_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { ACP_PCI_VENDOR_ID, ACP_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88660_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88670_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88671_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88671M_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88672_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88673_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88674_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88675_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88675M_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88676_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88676M_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88677_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88678_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88679_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88370_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88371_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88371M_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88375_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88470_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88470P_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88471_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88473_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88474_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88474H_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88476_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88477_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + + + { BROADCOM_VENDOR_ID, BCM88270_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88272_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88273_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88278_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + + { BROADCOM_VENDOR_ID, BCM8206_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + + { BROADCOM_VENDOR_ID, BCM88376_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88376M_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88377_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88378_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88379_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88680_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88681_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88682_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88683_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88684_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88685_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88380_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88381_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88690_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88202_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88360_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88361_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88363_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88460_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88461_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88560_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88561_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88562_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88661_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88664_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, +#endif +#ifdef BCM_DFE_SUPPORT + { BROADCOM_VENDOR_ID, BCM88750_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88753_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88755_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88770_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88773_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88774_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88775_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88776_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88777_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, +#ifndef DNX_IGNORE_FE3200 + { BROADCOM_VENDOR_ID, BCM88950_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, +#endif + { BROADCOM_VENDOR_ID, BCM88953_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88954_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88955_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88956_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88752_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88772_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM88952_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, +#endif +#ifdef BCM_DNXF_SUPPORT + { BROADCOM_VENDOR_ID, BCM88790_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, +#endif + { BROADCOM_VENDOR_ID, BCM56860_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56861_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56862_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56864_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56865_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56866_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56867_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56868_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56833_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56832_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56836_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56870_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { BROADCOM_VENDOR_ID, BCM56873_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID }, + { 0, 0, 0, 0 } +};; + +#define pci_bus_b(n) list_entry(n, struct pci_bus, node) +#define pci_dev_b(n) list_entry(n, struct pci_dev, bus_list) +#define MAX_RC_NUM 4 + +static struct pci_bus * +pci_do_bus_find(struct pci_bus* bus, int rc, int vendor, int device) +{ + struct list_head *tmp; + struct pci_dev *dev; + struct pci_bus *sub_bus; + int func = 0; + + if (unlikely(list_empty(&bus->children))) { + return NULL; + } + list_for_each(tmp, &bus->children) { + sub_bus = pci_bus_b(tmp); + dev = sub_bus->self; + func = dev->devfn & 0x7; + if (dev->vendor == vendor && dev->device == device && rc == func) { + if (debug >= 1) { + gprintk("pci_do_bus_find: dev->vendor = 0x%x, dev->device = 0x%x on rc(%d)\n", + dev->vendor, dev->device, rc); + } + return sub_bus; + } + } + return NULL; +} + +static struct pci_dev * +_pci_do_bus_dev_find(struct pci_bus* bus, unsigned int vendor, unsigned int device) +{ + struct list_head *tmp; + struct pci_dev *dev; + + if (unlikely(list_empty(&bus->devices))) { + return NULL; + } + list_for_each(tmp, &bus->devices) { + dev = pci_dev_b(tmp); + if (dev->vendor == vendor && (device == PCI_ANY_ID || dev->device == device)) { + if (debug >= 1) { + gprintk("_pci_do_rc_dev_find: vendor = %x, device = %x\n", vendor, device); + } + return dev; + } + } + return NULL; +} + +static struct pci_dev * +pci_do_rc_dev_find(int rc) +{ + struct pci_bus *root_bus = pci_find_bus(0,0); + struct pci_bus *bus_rc = NULL; + struct pci_dev *dev_on_rc = NULL; + unsigned int pci_dev_id = 0; + + if(NULL == root_bus) { + if (debug >= 1) gprintk("Not find root bus\n"); + return NULL; + } + bus_rc = pci_do_bus_find(root_bus, rc, 0x184e, 0x1004); + if (NULL == bus_rc) { + if (debug >= 1) { + gprintk("Not find vendor(0x184e) device(0x1004) bus\n"); + } + return NULL; + } + for(pci_dev_id = 0; pci_dev_id < sizeof(_id_table)/sizeof(struct pci_device_id); pci_dev_id++) { + dev_on_rc = _pci_do_bus_dev_find(bus_rc, _id_table[pci_dev_id].vendor, _id_table[pci_dev_id].device); + if (NULL != dev_on_rc) { + return dev_on_rc; + } + } + if (debug >= 1) { + gprintk("Not find device at rc(%d)\n", rc); + } + return NULL; +} + +/* + * Function: p2p_bridge + * + * Purpose: + * Finalize initialization secondary PCI-PCI bridge. + * Parameters: + * membase - start of memory address space for secondary PCI bus + * Returns: + * 0 + * Notes: + * The membase depends on the processor architecture, and is + * derived from the memory space addresses set up by the kernel. + */ +static int +p2p_bridge(void) +{ + struct pci_dev *dev, *dev_on_rc; + uint16 cmd; + uint16 mem_base; + uint16 mem_limit; + uint8 bridge_ctrl; + uint8 rc_index; + + if ((dev = PCI_FIND_DEV(DC21150_VENDOR_ID, DC21150_DEVICE_ID, NULL)) != NULL || + (dev = PCI_FIND_DEV(HINT_HB4_VENDOR_ID, HINT_HB4_DEVICE_ID, NULL)) != NULL || + (dev = PCI_FIND_DEV(PI7C8150_VENDOR_ID, PI7C8150_DEVICE_ID, NULL)) != NULL) { + + if (debug >= 1) gprintk("fixing up PCI-to-PCI bridge\n"); + /* Adjust command register */ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + /* Disable device */ + pci_write_config_word(dev, PCI_COMMAND, 0); + /* Initialize non-prefetchable memory window if needed */ + pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base); + if (mem_base == 0) { + mem_base = (uint16)((_pci_mem_start & 0xFFF00000) >> 16); + mem_limit = (uint16)((_pci_mem_end & 0xFFF00000) >> 16); + pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base); + pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit); + } + /* Enable PCI clocks on remote end */ + pci_write_config_word(dev, PCI_CFG_DEC21150_SEC_CLK, 0); + /* Re-enable config space */ + pci_write_config_word(dev, PCI_COMMAND, cmd); + + /* Avoid DMA data corruption */ + if (dev->vendor == HINT_HB4_VENDOR_ID) { + /* Fix for HiNT bridge and BCM4704 DMA problem */ + if ((dev = PCI_FIND_DEV(BCM4704_VENDOR_ID, BCM4704_DEVICE_ID, NULL)) != NULL) { + /* Reset PrefetchEn (PE) */ + pci_write_config_dword(dev, 0x8c, 1); + if (debug >= 1) { + gprintk("reset PrefetchEn on BCM4704 when HiNT bridge is present\n"); + } + } + } + } + /* Enable fast back-to-back read/write */ + if ((dev = PCI_FIND_DEV(PI7C8150_VENDOR_ID, PI7C8150_DEVICE_ID, NULL)) != NULL) { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_FAST_BACK; + pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bridge_ctrl); + bridge_ctrl |= PCI_BRIDGE_CTL_FAST_BACK; + pci_write_config_word(dev, PCI_COMMAND, 0); + pci_write_config_byte(dev, PCI_BRIDGE_CONTROL, bridge_ctrl); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + /* Netlogic XLP CPU */ + for(rc_index = 0; rc_index < MAX_RC_NUM; rc_index++) { + dev_on_rc = pci_do_rc_dev_find(rc_index); + if (dev_on_rc != NULL ) { + dev = PCI_FIND_DEV(0x184e, 0x1004, NULL); + if (dev != NULL ) { + pci_write_config_dword(dev,0x78,MAX_PAYLOAD_256B | + MAX_READ_REQ_256B); + } + } + } + if ((dev = PCI_FIND_DEV(0x14e4, 0xb634, NULL)) != NULL) { + pci_write_config_dword(dev,0x78,MAX_PAYLOAD_256B | + MAX_READ_REQ_256B); + } + + if ((dev = PCI_FIND_DEV(PCI_VNDID_PERICOM, PCI_DEVID_PI7C9X130, NULL)) != NULL) { + /* + * Configure the PCIE cap: Max payload size: 256, Max Read + * Request size: 256, disabling relax ordering. + * Writes to the PCIE capability device control register + */ + pci_write_config_dword(dev, DEV_CTRL_REG, + MAX_PAYLOAD_256B | MAX_READ_REQ_256B); + } + + if ((dev = PCI_FIND_DEV(FSL_VENDOR_ID, FSL8548PCIE_DEVICE_ID, NULL)) != NULL || + (dev = PCI_FIND_DEV(FSL_VENDOR_ID, FSL2020EPCIE_DEVICE_ID, NULL)) != NULL) { + /* + * Configure the PCIE cap: Max payload size: 256, Max Read + * Request size: 256, disabling relax ordering. + * Writes to the PCIE capability device control register + */ + pci_write_config_dword(dev, FSL8548PCIE_DEV_CTRL_REG, + MAX_PAYLOAD_256B | MAX_READ_REQ_256B); + } + if ((dev = PCI_FIND_DEV(BCM4716_VENDOR_ID, BCM4716PCIE_DEVICE_ID, NULL)) != NULL || + (dev = PCI_FIND_DEV(BCM53000_VENDOR_ID, BCM53000PCIE_DEVICE_ID, NULL)) != NULL) { + uint32 tmp, maxpayld, device_bmp=0, mask; + unsigned long addr; + uint16 tmp16, tmp161; + int i, bus0 = -1, bus1 = -1, port; + struct pci_dev *pcie0, *pcie1; + + pcie0 = dev; + bus0 = dev->bus->number; + if ((pcie1 = PCI_FIND_DEV(BCM53000_VENDOR_ID, BCM53000PCIE_DEVICE_ID, pcie0)) != NULL) { + bus1 = pcie1->bus->number; + } + + for(i = 0; i < _ndevices; i++) { + bde_ctrl_t *ctrl = _devices + i; + + mask = BDE_SWITCH_DEV_TYPE | BDE_PCI_DEV_TYPE; + if ((ctrl->dev_type & mask) == mask) { + if (ctrl->pci_device->bus->number == bus0) { + device_bmp |= 1 << 0; + } + if (ctrl->pci_device->bus->number == bus1) { + device_bmp |= 1 << 1; + } + } + } + + /* configure the PCIE cap: Max payload size: 256, Max Read + * Request size: 256, disabling relax ordering. + * Writes to the PCIE capability device control register + */ + + i = 0; + while(device_bmp) { + if (device_bmp & (1 << i)){ + port = i ; + pci_read_config_dword(BCM53000PCIE_DEV(port), + BCM53000PCIE_DEV_CAP_REG, &tmp); + maxpayld = (tmp & BCM53000PCIE_MAX_PAYLOAD_MASK); + if (debug >= 1) { + gprintk("port %d\n",port); + gprintk("DevCap (@%x): 0x%x%c\n", BCM53000PCIE_DEV_CAP_REG, tmp, + (maxpayld != BCM53000PCIE_CAP_MAX_PAYLOAD_256B) ? ' ':'\n'); + } + if (maxpayld != BCM53000PCIE_CAP_MAX_PAYLOAD_256B) { + addr = BCM53000PCIE_BASE(port); + addr |= (BCM53000PCIE_SROM_SPACE | BCM53000PCIE_SPROM_OFFSET); + tmp16 = *((uint16 *)addr); + if (debug >= 1){ + gprintk("addr %lx spromData.MaxPayloadSize: 0x%x\n", addr, tmp16); + } + mask = BCM53000PCIE_SPROM_MAX_PAYLOAD_MASK; + if ((tmp16 & mask) != BCM53000PCIE_SPROM_MAX_PAYLOAD_256B) { + tmp161 = (tmp16 & ~mask) | BCM53000PCIE_SPROM_MAX_PAYLOAD_256B; + *((uint16 *)addr) = tmp161; + if (debug >= 1) { + tmp16 = 0; + tmp16 = *((uint16 *)addr); + gprintk("Enable spromData.MaxPayloadSize to 1 (256 bytes): " + "0x%x (%s w/ 0x%x)\n", tmp161, + ((tmp16 & mask) == BCM53000PCIE_SPROM_MAX_PAYLOAD_256B) ? + "Success":"Fail", + tmp16); + } + } + pci_read_config_dword(BCM53000PCIE_DEV(port), + BCM53000PCIE_DEV_CAP_REG, &tmp); + if (debug >= 1){ + gprintk("DevCap (@%x): now is 0x%x\n\n", + BCM53000PCIE_DEV_CAP_REG, tmp); + } + } + + addr = BCM53000PCIE_BASE(port); + addr |= (BCM53000PCIE_FUNC0_COFIG_SPACE | BCM53000PCIE_DEV_CTRL_REG); + tmp16 = *((uint16 *)addr); + if (debug >= 1) { + gprintk("DevControl (@%x): 0x%x\n", BCM53000PCIE_DEV_CTRL_REG, tmp16); + } + if (!(tmp16 & MAX_PAYLOAD_256B) || !(tmp16 & MAX_READ_REQ_256B)) { + tmp161 = tmp16 | MAX_PAYLOAD_256B | MAX_READ_REQ_256B; + *((uint16 *)addr) = tmp161; + if (debug >= 1) { + tmp16 = 0; + tmp16 = *((uint16 *)addr); + gprintk("addr %lx Enable DevControl MaxPayloadSize to 1 (256 bytes): " + "0x%x (%s w/ 0x%x)\n", addr, tmp161, + (tmp16 & MAX_PAYLOAD_256B) ? "Success":"Fail", + tmp16); + gprintk("Enable DevControl MaxReadRequestSize to 1 (256 bytes): " + "0x%x (%s w/ 0x%x)\n\n", tmp161, + (tmp16 & MAX_READ_REQ_256B) ? "Success":"Fail", + tmp16); + } + } + device_bmp &= ~(1 << i); + } + i++; + } + } + + /* + * Configure max payload to 512 on all ports in the PLX8608/PLX8617. + * The device supports 128, 512, and 1024 max payload sizes. + */ + dev = NULL; + while ((dev = PCI_FIND_DEV(PCI_VENDOR_ID_PLX, PCI_ANY_ID, dev)) != NULL) { + if ((dev->device == PLX_PEX8608_DEV_ID) || + (dev->device == PLX_PEX8617_DEV_ID)) { + uint16 ctrl_reg; + pci_read_config_word(dev, PLX_PEX86XX_DEV_CTRL_REG, &ctrl_reg); + ctrl_reg = (ctrl_reg & ~(7<<5)) | MAX_PAYLOAD_512B; + pci_write_config_word(dev, PLX_PEX86XX_DEV_CTRL_REG, ctrl_reg); + } + } + return 0; +} + +#ifdef BCM_PLX9656_LOCAL_BUS + +#define PLX_LAS0_BA 0x00000004 /* LAS0 Local Base Address Remap */ +#define PLX_LAS1_BA 0x000000f4 /* LAS1 Local Base Address Remap */ +#define PLX_LAS_EN 0x00000001 /* Space Enable bit */ + +#define PLX_MMAP_PCIBAR0 0 /* Memory-Mapped Config (PCIBAR0) */ +#define PLX_LAS0_PCIBAR2 2 /* Local Address Space 0 (PCIBAR2) */ +#define PLX_LAS1_PCIBAR3 3 /* Local Address Space 1 (PCIBAR3) */ + +STATIC int +_plx_las_bar_get(struct pci_dev *dev) +{ + void *local_config_addr; + int bar = -1; + + local_config_addr = IOREMAP(pci_resource_start(dev, PLX_MMAP_PCIBAR0), + pci_resource_len(dev, PLX_MMAP_PCIBAR0)); + if (local_config_addr) { + uint32 las_remap_reg; + /* + * Make sure LAS0BA or LAS1BA is enabled before returning + * BAR that will be used to access the Local Bus + */ + las_remap_reg = ioread32(local_config_addr + PLX_LAS0_BA); + if (las_remap_reg & PLX_LAS_EN) { + bar = PLX_LAS0_PCIBAR2; + } else { + las_remap_reg = ioread32(local_config_addr + PLX_LAS1_BA); + if (las_remap_reg & PLX_LAS_EN) { + bar = PLX_LAS1_PCIBAR3; + } + } + } + iounmap(local_config_addr); + return bar; +} +#endif /* BCM_PLX9656_LOCAL_BUS */ + +static void +_shbde_log_func(int level, const char *str, int param) +{ + level = (level >= SHBDE_DBG) ? 1 : 0; + if (debug >= level) { + gprintk("%s (%d)\n", str, param); + } +} +/* + * Function: _device_rescan_validate + * + * Purpose: + * Check if the device is ever probed or not. + * Parameters: + * dev - Linux PCI device structure + * Returns: + * >= 0 : dev is ever probed + * reutrn value is the index point to the _devices[] + * -1 : dev is not probed before. + */ +static int +_device_rescan_validate(struct pci_dev *dev) +{ + bde_ctrl_t *ctrl; + int i; + + if (PCI_FUNC(dev->devfn) > 0) { + return -1; + } + ctrl = NULL; + for (i = 0; i < _ndevices; i ++) { + ctrl = _devices + i; + /* check the device id */ + if (dev->device == ctrl->bde_dev.device) { + /* check the bus number */ + if ((dev->bus)) { + if ((dev->bus->number == ctrl->bus_no) && + (pci_domain_nr(dev->bus) == ctrl->domain_no)) { + return i; + } + } + } + } + return -1; +} + +#ifdef CONFIG_PCI_MSI + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) +/** + * _pci_msix_table_size - return the number of device's MSI-X table entries + * @dev: pointer to the pci_dev data structure of MSI-X device function + */ +static int +_pci_msix_table_size(struct pci_dev *dev) +{ + int nr_entries = 0; + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,4,110)) + u16 control; + int pos; + + pos = pci_find_capability(dev, PCI_CAP_ID_MSIX); + if (pos) { + pci_read_config_word(dev, msi_control_reg(pos), &control); + nr_entries = msix_table_size(control); + } +#else +#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,14,0)) +{ + /* Pass large entry value to enable MSIX to get # of entires */ + struct msix_entry *entries; + entries = kmalloc(sizeof(struct msix_entry) * + PCI_MSIX_FLAGS_QSIZE, GFP_KERNEL); + if (entries != NULL) { + nr_entries = pci_enable_msix(dev, + entries, PCI_MSIX_FLAGS_QSIZE); + if (nr_entries < 0) { + nr_entries = 0; + } + kfree(entries); + } +} +#else + nr_entries = pci_msix_vec_count(dev); +#endif +#endif + + return nr_entries; +} +#endif + +static int +_msi_connect(bde_ctrl_t *ctrl) +{ + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) + int ret; + if (ctrl->use_msi == PCI_USE_INT_MSIX) { + int i; + ret = _pci_msix_table_size(ctrl->pci_device); + + if (ret == 0) { + /* MSI-X failed */ + gprintk("MSI-X not supported.\n"); + goto er_intx; + } + ctrl->entries = kcalloc(ret, sizeof(struct msix_entry)*ret, GFP_KERNEL); + + if (!ctrl->entries) { + goto er_intx; + } + /* We need only that much interrupt vecotrs */ + ctrl->msix_cnt = ret/4; + if (unlikely(debug > 1)) + gprintk("MSIX Table size = %d\n", ctrl->msix_cnt); + for (i = 0; i < ctrl->msix_cnt; i++) + ctrl->entries[i].entry = i; + + ret = pci_enable_msix(ctrl->pci_device, + ctrl->entries, ctrl->msix_cnt); + if (ret > 0) { + /* Not enough vectors available , Retry MSI-X */ + gprintk("Retrying with MSI-X interrupts = %d\n", ret); + ctrl->msix_cnt = ret; + ret = pci_enable_msix(ctrl->pci_device, + ctrl->entries, ctrl->msix_cnt); + if (ret != 0) + goto er_intx_free; + } else if (ret < 0) { + /* Error */ + goto er_intx_free; + } else { + gprintk("Enabled MSI-X interrupts = %d\n", ctrl->msix_cnt); + } + } +#endif + + if (ctrl->use_msi == PCI_USE_INT_MSI) { + if (pci_enable_msi(ctrl->pci_device) == 0) { + ctrl->iLine = ctrl->pci_device->irq; + } else { + /* MSI failed */ + gprintk("Failed to initialize MSI interrupts.\n"); + goto er_intx; + } + } else { + /* failed */ + gprintk("Not MSI/MSIC interrupt.\n"); + goto er_intx; + } + return 0; +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) +er_intx_free: + gprintk("Failed to enable MSI-X interrupts = %d\n", ret); + kfree(ctrl->entries); +#endif +er_intx: + return -1; + +} + +static int +_msi_disconnect(bde_ctrl_t *ctrl) +{ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) + if (ctrl->use_msi == PCI_USE_INT_MSIX) { + pci_disable_msix(ctrl->pci_device); + kfree(ctrl->entries); + ctrl->msix_cnt = 0; + } +#endif + if (ctrl->use_msi == PCI_USE_INT_MSI) { + pci_disable_msi(ctrl->pci_device); + } else { + gprintk("MSI not used\n"); + } + return 0; +} + +#endif + + +static void +config_pci_intr_type(bde_ctrl_t *ctrl) +{ + +#ifdef CONFIG_PCI_MSI + int ret; + + ctrl->use_msi = use_msi; + if (unlikely(debug > 1)) + gprintk("%s: msi = %d\n", __func__, ctrl->use_msi); + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) + if (ctrl->use_msi == PCI_USE_INT_MSIX) { + /* check for support MSIX vector */ + ret = _pci_msix_table_size(ctrl->pci_device); + if (ret == 0) { + gprintk("%s: Zero MSIX table size\n", __func__); + ctrl->use_msi = PCI_USE_INT_MSI; + } + } +#endif + + if (ctrl->use_msi == PCI_USE_INT_MSI) { + /* check for support MSI vector */ + ret = pci_enable_msi(ctrl->pci_device); + if (ret < 0) { + ctrl->use_msi = PCI_USE_INT_INTX; + gprintk("%s: Failed to enable MSI\n", __func__); + } else { + pci_disable_msi(ctrl->pci_device); + } + } +#else + ctrl->use_msi = PCI_USE_INT_INTX; +#endif +} + +/* + * Function: _pci_probe + * + * Purpose: + * Device initialization callback used by the Linux PCI + * subsystem. Called as a result of pci_register_driver(). + * Parameters: + * dev - Linux PCI device structure + * Returns: + * 0 + */ +static int +_pci_probe(struct pci_dev *dev, const struct pci_device_id *ent) +{ + bde_ctrl_t *ctrl; + resource_size_t paddr; + uint16 cmd = 0; + uint32 bar_len; + int cmic_bar; + int baroff = 0; + int iproc = 0; + uint32 gmac_base = 0; + int plx_dev = 0; + int eth_dev = 0; + int cpu_dev = 0; + int update_devid = 0; + int paxb_core = 0; + int rescan = 0, rescan_idx = -1; + shbde_hal_t shared_bde, *shbde = &shared_bde; + + if (debug >= 4) {gprintk("probing: vendor_id=0x%x, device_id=0x%x\n", dev->vendor, dev->device);} + if (nodevices == 1) { + return 0; + } + + /* Initialize Linux hardware abstraction for shared BDE functions */ + linux_shbde_hal_init(shbde, _shbde_log_func); + + /* + * If an AXI-based switch device has been found already, then it means + * that the AXI bus has been probed, and that we should ignore devices + * found on PCI bus zero. + */ + +#if defined(IPROC_CMICD) + if ((dev->bus) && (dev->bus->number == 0)) { + int i; + uint32 mask = BDE_SWITCH_DEV_TYPE | BDE_AXI_DEV_TYPE; + + for (i = 0; i < _ndevices; i++) { + ctrl = _devices + i; + + if ((ctrl->dev_type & mask) == mask) { + return 0; + } + } + } +#endif /* IPROC_CMICD */ + + /* + * Note that a few supported devices have a non-Broadcom PCI vendor ID, + * but since none of their associated PCI device IDs collide with the + * Broadcom device IDs, the probe code below only checks the device ID. + */ + + switch (dev->device) { + case PCI_DEVICE_ID_PLX_9056: +#ifdef DNX_TEST_BOARD + break; /* a PCIe bridge to a non PCIe device should be treated as the device */ +#endif /* DNX_TEST_BOARD */ + case PCI_DEVICE_ID_PLX_9656: + plx_dev = 1; + break; +#if defined (BCM_ROBO_SUPPORT) && defined(KEYSTONE) + case BCM53000_GMAC_ID: + eth_dev = 1; + gmac_base = SB_ENUM_BASE; + break; +#endif +#if defined (BCM_ROBO_SUPPORT) + case BCM47XX_ENET_ID: + eth_dev = 1; + break; +#endif + case BCM53000PCIE_DEVICE_ID: + cpu_dev = 1; + break; + /* + * The device ID for 56500, 56100 and 56300 family of devices may + * be incorrect just after a PCI HW reset. It needs to be read + * again after stabilization. + */ + case BCM56102_DEVICE_ID: + case BCM56504_DEVICE_ID: + case BCM56304_DEVICE_ID: + case BCM56314_DEVICE_ID: + case BCM56112_DEVICE_ID: + update_devid = 1; + break; + default: + break; + } + + /* Check if the device is ever probed. */ + rescan_idx = _device_rescan_validate(dev); + if (rescan_idx != -1) { + rescan = 1; + } + + ctrl = NULL; + if (plx_dev) { +#if defined(BCM_PLX9656_LOCAL_BUS) + /* PLX chip itself won't be part of _devices[]. */ + baroff = _plx_las_bar_get(dev); + if (baroff == -1) { + gprintk("No Local Address Space enabled in PLX\n"); + return 0; + } + ctrl = &plx_ctrl; + num_plx++; +#endif + } else if (eth_dev) { + if (_ether_ndevices >= LINUX_BDE_MAX_ETHER_DEVICES) { + return 0;; + } + ctrl = _devices + _ndevices++; + _ether_ndevices++; + ctrl->dev_type |= BDE_ETHER_DEV_TYPE; + ctrl->iLine = dev->irq; + if (debug >= 1) + gprintk("Found PCI device %04x:%04x as Ethernet device\n", + dev->vendor, dev->device); + } else if (cpu_dev) { + if (_cpu_ndevices >= LINUX_BDE_MAX_CPU_DEVICES) { + return 0;; + } + ctrl = _devices + _ndevices++; + _cpu_ndevices++; + ctrl->dev_type |= BDE_CPU_DEV_TYPE; + if (debug >= 1) + gprintk("Found PCI device %04x:%04x as CPU device\n", + dev->vendor, dev->device); + } else { + if (PCI_FUNC(dev->devfn) > 0) { + return 0; + } + if (_switch_ndevices >= LINUX_BDE_MAX_SWITCH_DEVICES) { + return 0;; + } + + if (rescan) { + if (debug >= 1) { + gprintk("PCI device %04x:%04x is re-probed \n", + dev->vendor, dev->device); + } + ctrl = _devices + rescan_idx; + ctrl->dev_state = BDE_DEV_STATE_CHANGED; + } else { + ctrl = _devices + _ndevices++; + _switch_ndevices++; + ctrl->dev_type |= BDE_SWITCH_DEV_TYPE; + ctrl->domain_no = pci_domain_nr(dev->bus); + ctrl->bus_no = dev->bus->number; + ctrl->dev_state = BDE_DEV_STATE_NORMAL; + } + + /* Save shared BDE HAL in device structure */ + memcpy(&ctrl->shbde, shbde, sizeof(ctrl->shbde)); + + if (update_devid) { + /* Re-read the device ID */ + pci_read_config_word(dev, + PCI_DEVICE_ID, + &ctrl->bde_dev.device); + dev->device = ctrl->bde_dev.device; + } + + if (debug >= 4) {gprintk("Enabling PCI device : vendor_id=0x%x, device_id=0x%x\n", dev->vendor, dev->device);} + if (pci_enable_device(dev)) { + gprintk("Cannot enable PCI device : vendor_id = %x, device_id = %x\n", + dev->vendor, dev->device); + } + + /* FIXME: "workarounds" previously called "total h_acks" */ + /* + * These are workarounds to get around some existing + * kernel problems :( + */ + + /* + * While probing we determine the overall limits for the PCI + * memory windows across all devices. These limits are used + * later on by the PCI-PCI bridge code. + */ + if (pci_resource_start(dev, baroff) < _pci_mem_start) { + _pci_mem_start = pci_resource_start(dev, baroff); + } + if (pci_resource_end(dev, baroff) > _pci_mem_end) { + _pci_mem_end = pci_resource_end(dev, baroff); + } + +#ifdef CONFIG_SANDPOINT + /* + * Something wrong with the PCI subsystem in the mousse kernel. + * The device is programmed correctly, but the irq in the pci + * structure is hosed. This checks for the hosed-ness and fixes it. + */ + if (dev->irq > 100) { + dev->irq = 2; + gprintk("irq problem: setting irq = %d\n", dev->irq); + } +#endif + +#ifdef CONFIG_BMW + /* + * PCI subsystem does not always program the system correctly. + */ + if (dev->irq < 16 && dev->irq != 2) { + dev->irq = 2; + gprintk("irq problem: setting irq = %d\n", dev->irq); + } +#endif + +#ifdef CONFIG_IDT_79EB334 + /* + * IDT kernel is not currently mapping interrupts correctly + * Hardwired to core mips interrupt, irq 3 for kernel 2.4.18 + */ + if (dev->irq != 3) { + dev->irq = 3; + gprintk("irq problem: setting irq = %d\n", dev->irq); + } +#endif + +#ifdef CONFIG_BCM94702_CPCI + /* + * Hardwired to core mips interrupt irq 6 on MBZ + */ + if (dev->irq != 6) { + dev->irq = 6; + gprintk("irq problem: setting irq = %d\n", dev->irq); + } +#endif + + if ((PCI_FIND_DEV(BCM4704_VENDOR_ID, BCM4704_DEVICE_ID, NULL)) != NULL) { + /* + * Decrease the PCI bus priority for the CPU for better overall + * system performance. This change significantly reduces the + * number of PCI retries from other devices on the PCI bus. + */ + void * _mc_vbase = IOREMAP(BCM4704_MEMC_BASE, 0x1000); + int priorinv = 0x80; + static int done = 0; + if (!done) { + done = 1; + writel(priorinv, _mc_vbase + BCM4704_MEMC_PRIORINV); + if (debug >= 1) + gprintk("set BCM4704 PriorInvTim register to 0x%x\n", priorinv); + iounmap(_mc_vbase); + } + } + + if ((PCI_FIND_DEV(SIBYTE_PCI_VENDOR_ID, SIBYTE_PCI_DEVICE_ID, NULL)) != NULL) { + /* + * The BCM91125CPCI CPU boards with a PCI-PCI bridge use the same + * interrupt line for all switch ships behind the bridge. + */ + if (PCI_FIND_DEV(DC21150_VENDOR_ID, DC21150_DEVICE_ID, NULL) || + PCI_FIND_DEV(HINT_HB4_VENDOR_ID, HINT_HB4_DEVICE_ID, NULL) || + PCI_FIND_DEV(PI7C8150_VENDOR_ID, PI7C8150_DEVICE_ID, NULL)) { + /* + * By default we try to guess the correct IRQ based on the design. + * For now we only look at the bridge vendor, but it may be necessary + * to look at the switch chip configuration as well. + */ + if (forceirq == -1) { + if ((PCI_FIND_DEV(HINT_HB4_VENDOR_ID, HINT_HB4_DEVICE_ID, NULL)) || + ((dev->device == BCM5674_DEVICE_ID) && + (PCI_FIND_DEV(PI7C8150_VENDOR_ID, PI7C8150_DEVICE_ID, NULL)))) { + forceirq = 58; + } else { + forceirq = 56; + } + } + } + } + + if (((PCI_FIND_DEV(BCM58525_PCI_VENDOR_ID, BCM58525_PCI_DEVICE_ID, NULL)) != NULL) || + ((PCI_FIND_DEV(BCM58525_PCI_VENDOR_ID, BCM58522_PCI_DEVICE_ID, NULL)) != NULL) || + ((PCI_FIND_DEV(BCM58712_PCI_VENDOR_ID, BCM58712_PCI_DEVICE_ID, NULL)) != NULL) ) { + /* BCM58525/BCM58712 CPU boards support 128 Max payload size */ + if (maxpayload) { + maxpayload = 128; + if (debug >= 1) gprintk("force max payload size to 128\n"); + } + } + + if (forceirq > 0 && dev->irq != (uint32) forceirq) { + if (forceirqubm & (1U << (_ndevices - 1))) { + dev->irq = forceirq; + if (debug >= 1) gprintk("force irq to %d\n", forceirq); + } + } else if (debug >= 1) gprintk("found irq %d\n", dev->irq); + + ctrl->iLine = dev->irq; + if (unlikely(debug > 1)) + gprintk("%s:irq = %d\n",__func__, ctrl->iLine); + + if (shbde_pci_is_pcie(shbde, dev)) { + /* Set PCIe max payload */ + shbde_pci_max_payload_set(shbde, dev, maxpayload); + } else { + /* Set PCI retry to infinite on non-PCIe switch device */ + pci_write_config_word(dev, 0x40, 0x0080); + if (debug >= 1) gprintk("set DMA retry to infinite on switch device\n"); + } + } + +#if defined(BCM_DFE_SUPPORT) + switch (dev->device) { + case BCM88750_DEVICE_ID: + case BCM88753_DEVICE_ID: + case BCM88755_DEVICE_ID: + case BCM88770_DEVICE_ID: + case BCM88773_DEVICE_ID: + case BCM88774_DEVICE_ID: + case BCM88775_DEVICE_ID: + case BCM88776_DEVICE_ID: + case BCM88777_DEVICE_ID: + case BCM88950_DEVICE_ID: + case BCM88953_DEVICE_ID: + case BCM88954_DEVICE_ID: + case BCM88955_DEVICE_ID: + case BCM88956_DEVICE_ID: + case BCM88752_DEVICE_ID: + case BCM88772_DEVICE_ID: + case BCM88952_DEVICE_ID: + + /* + * For DMA transactions - set Max_Payload_Size and + * Max_Read_Request_Size to 128 bytes. + */ + pci_write_config_byte(dev, 0xb5, 0x0c); + pci_write_config_byte(dev, 0xb4, 0x0); + break; + default: + break; + } +#endif /* BCM_DFE_SUPPORT */ + +#if defined(BCM_DNXF_SUPPORT) + switch (dev->device) { + case BCM88790_DEVICE_ID: + + /* + * For DMA transactions - set Max_Payload_Size and + * Max_Read_Request_Size to 128 bytes. + */ + pci_write_config_byte(dev, 0xb5, 0x0c); + pci_write_config_byte(dev, 0xb4, 0x0); + break; + default: + break; + } +#endif + + /* Prevent compiler warning */ + if (ctrl == NULL) { + return 0; + } + + ctrl->be_pio = 0; + ctrl->dev_type |= BDE_PCI_DEV_TYPE; + ctrl->pci_device = dev; + pci_set_drvdata(dev, ctrl); + + /* Check for iProc device */ + if (shbde_pci_is_iproc(shbde, dev, &cmic_bar)) { + iproc = 1; + if (cmic_bar >= 0) { + baroff = cmic_bar; + } + } +#ifdef DNX_TEST_BOARD + else if (dev->device == PLX9056_DEVICE_ID && baroff == 0) { + baroff = 2; + ctrl->dev_type |= BDE_NO_IPROC/* | BDE_BYTE_SWAP*/; + } +#endif /* DNX_TEST_BOARD */ + + /* Get the device revision */ + pci_read_config_byte(dev, PCI_REVISION_ID, &ctrl->bde_dev.rev); + + /* Map in the device */ + ctrl->bde_dev.device = dev->device; + paddr = pci_resource_start(dev, baroff); + + switch (dev->device) { +#if defined(BCM_PETRA_SUPPORT) && defined(__DUNE_LINUX_BCM_CPU_PCIE__) + case GEDI_DEVICE_ID: + case PCP_PCI_DEVICE_ID: + bar_len = 0x1000000; + break; +#endif + default: + bar_len = pci_resource_len(dev, baroff); + break; + } + + ctrl->bde_dev.base_address = (sal_vaddr_t)IOREMAP(paddr, bar_len); + ctrl->phys_address = paddr; + if (debug >= 3) { + gprintk("BAR %d: kernel addr:0x%lx phys addr:0x%lx length:%lx\n", + baroff, (unsigned long)ctrl->bde_dev.base_address, (unsigned long)paddr, (unsigned long)bar_len); + } + + /* Map secondary address spaces */ + if (iproc +#ifdef DNX_TEST_BOARD + || (dev->device == PLX9056_DEVICE_ID && baroff == 2) +#endif /* DNX_TEST_BOARD */ + ) { + paddr = pci_resource_start(dev, 0); + bar_len = pci_resource_len(dev, 0); + ctrl->bde_dev.base_address1 = (sal_vaddr_t)IOREMAP(paddr, bar_len); + ctrl->phys_address1 = paddr; + if (debug >= 3) { + gprintk("BAR 0: kernel addr:0x%lx phys addr:0x%lx length:%lx\n", + (unsigned long)ctrl->bde_dev.base_address1, (unsigned long)paddr, (unsigned long)bar_len); + } + } + + /* Each device follows global policy by default */ + ctrl->use_msi = use_msi; + + /* Check is MSI is properly supported in kernel for this device */ + if (ctrl->use_msi) { + if (pci_enable_msi(ctrl->pci_device) == 0) { + /* Release MSI resources until interrupt_connect is called */ + pci_disable_msi(ctrl->pci_device); + } else { + gprintk("Could not enable MSI interrupts\n"); + ctrl->use_msi = 0; + } + } + + /* configure interrupt type */ + config_pci_intr_type(ctrl); + + /* Configure iProc PCI-AXI bridge */ + if (iproc && ctrl->bde_dev.base_address1) { + void *iproc_regs; + shbde_iproc_config_t *icfg = &shbde->icfg; + + /* Mapped iProc regs in PCI BAR 0 */ + iproc_regs = (void *)ctrl->bde_dev.base_address1; + + /* iProc configuration parameters */ + (void)shbde_pci_iproc_version_get(shbde, dev, &icfg->iproc_ver, + &icfg->cmic_ver, &icfg->cmic_rev); + shbde_iproc_config_init(icfg, ctrl->bde_dev.device, ctrl->bde_dev.rev); + + if (debug >=2) { + gprintk("iproc version = %x dma_hi_bits = %x\n", icfg->iproc_ver, icfg->dma_hi_bits); + } + icfg->use_msi = ctrl->use_msi; + + /* Call shared function */ + paxb_core = shbde_iproc_paxb_init(shbde, iproc_regs, icfg); + + /* Save PCI core information for CMIC */ + if (paxb_core == 1) { + ctrl->dev_type |= BDE_DEV_BUS_ALT; + } + + /* Save MSI enable state information */ + if (ctrl->use_msi) { + ctrl->dev_type |= BDE_DEV_BUS_MSI; + } + + /* iProc PCIe preemphasis */ + shbde_iproc_pcie_preemphasis_set(shbde, iproc_regs, icfg, dev); + } + + /* Save shared BDE HAL in device structure */ + memcpy(&ctrl->shbde, shbde, sizeof(ctrl->shbde)); + +#if defined(VENDOR_BROADCOM) +#if defined(BCM_PLX9656_LOCAL_BUS) && defined(SHADOW_SVK) + if (num_plx) { + sal_vaddr_t base_address; + uint32 intr_enable; + + paddr = pci_resource_start(dev, 0); + bar_len = pci_resource_len(dev, 0); + base_address = (sal_vaddr_t)IOREMAP(paddr, bar_len); + + intr_enable = readl((uint32 *)(base_address + 0x68)); + gprintk("PLX Interrupt ENABLE: %x\n", intr_enable); + intr_enable |= 0x00080000; + writel(intr_enable, (uint32 *)(base_address + 0x68)); + gprintk("PLX Interrupt ENABLE: %x\n", intr_enable); + } +#endif +#endif + + /* + * Since the GMAC driver of Robo chips needs access to the + * ChipCommon and Wrapper registers, we set the base address + * as the enumeration base address and its size as 3MB to + * cover all Wrapper register regions. + */ + if (gmac_base) { + uint32_t offset; + + ctrl->bde_dev.base_address = (sal_vaddr_t)IOREMAP(gmac_base, 0x300000); + + /* Record the base address of GMAC core */ + offset = ctrl->phys_address - gmac_base; + ctrl->alt_base_addr = ctrl->bde_dev.base_address + offset; + ctrl->phys_address = gmac_base; + } + + /* + * Workaround bug in FE2K A1 part; shows as A0 part in PCI config space, + * read the FE's regs directly to get the true revision + */ + if (ctrl->bde_dev.device == BCM88020_DEVICE_ID && ctrl->bde_dev.rev == 0) { +#define FE2000_REVISION_OFFSET (0x0) + uint32_t fe_rev; + + fe_rev = *((uint32_t*)(ctrl->bde_dev.base_address + FE2000_REVISION_OFFSET)); + if ((fe_rev >> 16) == BCM88020_DEVICE_ID) { + fe_rev &= 0xff; + } else { + fe_rev = (fe_rev >> 24) & 0xff; + } + ctrl->bde_dev.rev = fe_rev; + } + + ctrl->isr = NULL; + ctrl->isr_data = NULL; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (!(cmd & PCI_COMMAND_MEMORY) || !(cmd & PCI_COMMAND_MASTER)) { + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + pci_write_config_word(dev, PCI_COMMAND, cmd); + if (debug >= 1) gprintk("enable PCI resources 0x%x (PCI_COMMAND)\n", cmd); + } + + /* Check if we need 256 KB memory window (default is 64 KB) */ + bar_len = pci_resource_len(dev, baroff); + if ((bar_len == 0x40000) || (bar_len == 0x800000)) { + ctrl->dev_type |= BDE_256K_REG_SPACE; + if (debug >= 1) gprintk("PCI resource len 256K\n"); + } + +#if defined (BCM_ROBO_SUPPORT) && !defined(ALTA_ROBO_SPI) + /* MDC/MDIO path for pseudo PHY access to ROBO register on BCM5836/4704 */ + if (dev->device == BCM47XX_ENET_ID) { + ((uint32 *)ctrl->bde_dev.base_address)[0x410 / 4] = 0; + } +#endif + +#ifdef LINUX_BDE_DMA_DEVICE_SUPPORT + ctrl->dma_dev = &dev->dev; +#endif + + if (debug >= 2) { + gprintk("_pci_probe: configured dev:0x%x rev:0x%x with base_addresses: 0x%lx 0x%lx\n", + (unsigned)ctrl->bde_dev.device, (unsigned)ctrl->bde_dev.rev, + (unsigned long)ctrl->bde_dev.base_address, (unsigned long)ctrl->bde_dev.base_address1); + } + /* Let's boogie */ + + return 0; +} + +/* + * Function: _pci_remove + * + * Purpose: + * Detach driver from device. Called from pci_unregister_driver(). + * Parameters: + * dev - Linux PCI device structure + * Returns: + * 0 + */ +static void +_pci_remove(struct pci_dev* dev) +{ + bde_ctrl_t *ctrl; + + if (nodevices == 1) { + return; + } + +#if defined(BCM_DFE_SUPPORT) + if (dev->device == PCI_DEVICE_ID_PLX_9056) { + return; + } +#endif + + ctrl = (bde_ctrl_t *) pci_get_drvdata(dev); + + if (ctrl == NULL) { + /* Unused device */ + return; + } + ctrl->dev_state = BDE_DEV_STATE_REMOVED; + if (debug >= 1) { + gprintk("PCI device %04x:%04x is removed. \n", + dev->vendor, dev->device); + } + if (ctrl->bde_dev.base_address1) { + iounmap((void *)ctrl->bde_dev.base_address1); + } + if (ctrl->bde_dev.base_address) { + iounmap((void *)ctrl->bde_dev.base_address); + } + + /* Free our interrupt handler, if we have one */ + if (ctrl->isr || ctrl->isr2) { +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) + if (ctrl->use_msi >= PCI_USE_INT_MSIX) { + int i; + for (i = 0; i < ctrl->msix_cnt; i++) + free_irq(ctrl->entries[i].vector, ctrl->pci_device); + } + else +#endif + { + free_irq(ctrl->iLine, ctrl); + } + } +#ifdef CONFIG_PCI_MSI + _msi_disconnect(ctrl); +#endif + ctrl->isr = NULL; + ctrl->isr_data = NULL; + ctrl->isr2 = NULL; + ctrl->isr2_data = NULL; +} + +static struct pci_driver _device_driver = { + probe: _pci_probe, + remove: _pci_remove, + id_table: _id_table, + /* The rest are dynamic */ +}; + +static void +_spi_device_setup(void) { + bde_ctrl_t *ctrl; + ctrl = _devices + _ndevices++; + _switch_ndevices++; + ctrl->dev_type |= BDE_SWITCH_DEV_TYPE; + ctrl->iLine = 0xa3; + ctrl->be_pio = 0; + ctrl->dev_type |= BDE_SPI_DEV_TYPE; + ctrl->bde_dev.device = spi_devid; + ctrl->bde_dev.rev = spi_revid; + if (debug >= 1) { + gprintk("SPI Slave Mode: force ctrl->bde_dev.device=0x%x\n",ctrl->bde_dev.device); + gprintk("SPI Slave Mode: force ctrl->bde_dev.rev=0x%x\n",ctrl->bde_dev.rev); + gprintk("SPI Slave Mode: force ctrl->dev_type=0x%x\n",ctrl->dev_type); + } +} +#endif /* BCM_ICS */ + + +#ifdef BCM_ROBO_SUPPORT + +#ifdef KEYSTONE +#define DEFAULT_FREQ (SPI_FREQ_DEFAULT) +#define FREQ_20MHZ (SPI_FREQ_20MHZ) +#else /* IPROC_CMICD */ +#define DEFAULT_FREQ (0) +#define FREQ_20MHZ (0) +#endif + + +/* +* The model_info /rev_info for Robo devices is defined like this: +* +* 31 28 27 24 23 20 19 16 15 8 7 0 +* +----+---------+------+-----+---------+--------+ +* | op | reserved| mask |len | page |offset | +* +----+---------+------+-----+---------+--------+ +* +* op: 1:OR phyidl, 2: use PCIE device ID +* mlen: mask len (in bytes) 1:means 0xf,2 means 0xff +* len: Size of model/rev ID register (in bytes) +* page: Page containing model ID and revision registers +* offset: Model/rev ID register offset +*/ +static struct bde_spi_device_id _spi_id_table[] = { + { BCM53242_PHYID_HIGH, BCM53242_PHYID_LOW , 0, 0, DEFAULT_FREQ}, + { BCM53262_PHYID_HIGH, BCM53262_PHYID_LOW , 0, 0, DEFAULT_FREQ}, + { BCM53115_PHYID_HIGH, BCM53115_PHYID_LOW , 0, 0, DEFAULT_FREQ}, + { BCM53118_PHYID_HIGH, BCM53118_PHYID_LOW , 0, 0, DEFAULT_FREQ}, + { BCM53280_PHYID_HIGH, BCM53280_PHYID_LOW , 0x101800e8, 0, FREQ_20MHZ}, + { BCM53101_PHYID_HIGH, BCM53101_PHYID_LOW , 0, 0x110240, FREQ_20MHZ}, + { BCM53125_PHYID_HIGH, BCM53125_PHYID_LOW , 0, 0x110240, FREQ_20MHZ}, + { BCM53128_PHYID_HIGH, BCM53128_PHYID_LOW , 0, 0x110240, FREQ_20MHZ}, + { BCM53600_PHYID_HIGH, BCM53600_PHYID_LOW , 0x101800e8, 0, FREQ_20MHZ}, + { BCM89500_PHYID_HIGH, BCM89500_PHYID_LOW ,0x240230, 0x110240, FREQ_20MHZ}, + { BCM53010_PHYID_HIGH, BCM53010_PHYID_LOW ,0x240230, 0x110240, 0}, + { BCM53018_PHYID_HIGH, BCM53018_PHYID_LOW ,0x240230, 0x110240, 0}, + { BCM5389_PHYID_HIGH, BCM5389_PHYID_LOW, 0x110230, 0x110240, DEFAULT_FREQ}, + { BCM53020_PHYID_HIGH, BCM53020_PHYID_LOW ,0x20240230, 0x110240, 0}, + { BCM5396_PHYID_HIGH , BCM5396_PHYID_LOW, 0x110230, 0x110240, DEFAULT_FREQ}, + { BCM53134_PHYID_HIGH, BCM53134_PHYID_LOW , 0, 0x110240, DEFAULT_FREQ}, + { 0, 0, 0, 0, 0 }, +}; +#endif + +#ifdef BCM_ROBO_SUPPORT + +static int +_spi_device_valid_check(unsigned short phyidh,unsigned short phyidl, uint8 check_flag) +{ + struct bde_spi_device_id *_ids; + int idx, match_idx; + + match_idx = -1; + idx = 0; + + if (check_flag == 0){ + /* check_flag == 0 check phyidh only*/ + for (_ids = _spi_id_table; + _ids->phyid_high && _ids->phyid_low; _ids++){ + if (_ids->phyid_high == phyidh) { + return 0; + } + } + /* No valid SPI devices found */ + return 1; + } else { + while(_spi_id_table[idx].phyid_high){ + if (phyidh == _spi_id_table[idx].phyid_high && + phyidl == _spi_id_table[idx].phyid_low) { + /* Found a match */ + match_idx = idx; + break; + } + idx++; + } + return match_idx; + } +} + +#if defined(IPROC_CMICD) || defined(KEYSTONE) +#define ROBO_ATTACH_AVAIL +#endif + +#ifdef ROBO_ATTACH_AVAIL + +#define SOC_ATTACH(_sc)\ + ai_soc_kattach(_sc) + +#if defined(IPROC_CMICD) +#ifdef BCM_STARFIGHTER3_SUPPORT +#define ROBO_ATTACH_SPI(_sih, _ss)\ + robo_attach_spi(_sih) +#define ROBO_DETACH_SPI(robo)\ + robo_detach_spi(robo) +#define ROBO_SPI_RREG(_robo, _dev, _page, _reg, _buf, _len) \ + robo_spi_rreg(_robo, _dev, _page, _reg, _buf, _len) +#define ROBO_SPI_WREG(_robo, _dev, _page, _reg, _buf, _len) \ + robo_spi_wreg(_robo, _dev, _page, _reg, _buf, _len) +#endif +#define ROBO_ATTACH(_sih, _ss)\ + robo_attach(_sih) +#define MAX_BUSTYPE 1 +#define ROBO_SWITCH_BUS(_robo, _bustype) +#define ROBO_SELECT_DEVICE(_robo, _phyidh, _phyidl) +#else /* KEYSTONE */ +#define ROBO_ATTACH(_sih, _ss)\ + robo_attach(_sih, _ss) +/* bustype 2: ROBO_MDCMDIO_BUS, 1: ROBO_SPI_BUS */ +#define MAX_BUSTYPE 2 +#define ROBO_SWITCH_BUS(_robo, _bustype)\ + robo_switch_bus(_robo, _bustype) + +#define ROBO_SELECT_DEVICE(_robo, _phyidh, _phyidl) \ + robo_select_device(_robo, _phyidh, _phyidl) +#endif + +#else + +#define SOC_ATTACH(_sc) (NULL) +#define ROBO_ATTACH(_sih, _ss) (NULL) +#define MAX_BUSTYPE (0) +#define ROBO_SWITCH_BUS(_robo, _bustype) +#define ROBO_SELECT_DEVICE(_robo, _phyidh, _phyidl) +#endif + + +#if defined(IPROC_CMICD) && defined(BCM_STARFIGHTER3_SUPPORT) +static int +probe_robo_switch_iproc_spi(void) +{ + int dev; + int max_devices, max_bustype; + uint8 buf[8]; + unsigned short phyidh = 0, phyidl = 0; + + + /* Get Robo device handle */ + if (robo == NULL) { + robo = (void *)ROBO_ATTACH_SPI(sbh, 0); + } + if (robo == NULL) { + return -ENODEV; + } + + max_bustype = MAX_BUSTYPE + 1; + + while(_spi_device_valid_check(phyidh, 0, 0)) { + max_bustype --; + if(!max_bustype) + return -ENODEV; + buf[0] = buf[1] = 0; + ROBO_SPI_RREG(robo, 0, 0x10, 0x04, buf, (uint)2); + phyidh = buf[0] | (buf[1] << 8); + /* re-try */ + if ((phyidh == 0x0) || (phyidh == 0xffff)) { + ROBO_SPI_RREG(robo, 0, 0x10, 0x04, buf, (uint)2); + phyidh = buf[0] | (buf[1] << 8); + } + } + + /* For psedo_phy access, only support one robo switch*/ + /* For Northstar, only one switch on SRAB interface */ + max_devices = (max_bustype == MAX_BUSTYPE) ? 1 : LINUX_BDE_MAX_SWITCH_DEVICES; + + for (dev = 0; dev < max_devices; dev++) { + bde_ctrl_t *ctrl; + int match_idx, i; + unsigned short phyidl_nr; /* phyidl with revision stripped */ + uint16 model_id; + uint8 rev_id; + uint32 addr, len; + uint32 mlen; + + if (_switch_ndevices >= LINUX_BDE_MAX_SWITCH_DEVICES) { + break; + } + buf[0] = buf[1] = 0; + ROBO_SPI_RREG(robo, dev, 0x10, 0x04, buf, (uint)2); + phyidh = buf[0] | (buf[1] << 8); + + buf[0] = buf[1] = 0; + ROBO_SPI_RREG(robo, dev, 0x10, 0x06, buf, (uint)2); + phyidl = buf[0] | (buf[1] << 8); + + /* Strip revision */ + phyidl_nr = phyidl & 0xfff0; + + match_idx = _spi_device_valid_check(phyidh, phyidl_nr, 1); + if (match_idx == -1) { + if (debug >= 1) gprintk("found %d robo device(s).\n", robo_switch); + break; + } + + model_id = phyidl_nr; + + if(_spi_id_table[match_idx].rev_info){ + addr = _spi_id_table[match_idx].rev_info & 0xffff; + len = (_spi_id_table[match_idx].rev_info >> 16) & 0xf; + ROBO_SPI_RREG(robo, dev, (addr >> 8), (addr & 0xff), buf, (uint)len); + mlen = (_spi_id_table[match_idx].rev_info >> 20) & 0xf; + rev_id = 0; + for (i = 0; i < mlen; i++) + rev_id |= buf[i] << (i << 3); + } else { + rev_id = phyidl & 0xf; + } + + gprintk("found robo device with %d:%04x:%04x:%04x:%02x\n", + dev, phyidh, phyidl, model_id, rev_id); + + ROBO_SELECT_DEVICE(robo, phyidh, phyidl); + + /* Match supported chips */ + ctrl = _devices + _ndevices++; + _switch_ndevices++; + + if (NULL == (ctrl->spi_device = (struct spi_dev *) + KMALLOC(sizeof(struct spi_dev), GFP_KERNEL))) { + gprintk("no memory available"); + return -ENOMEM; + } + ctrl->dev_type = (BDE_SPI_DEV_TYPE | BDE_SWITCH_DEV_TYPE); + ctrl->spi_device->cid = dev; + ctrl->spi_device->part = model_id; + ctrl->spi_device->rev = rev_id; + ctrl->spi_device->robo = robo; + ctrl->spi_device->phyid_high = phyidh; + ctrl->spi_device->phyid_low = phyidl; + ctrl->bde_dev.device = model_id; + ctrl->bde_dev.rev = rev_id; + ctrl->bde_dev.base_address = (sal_vaddr_t)NULL; + ctrl->isr = NULL; + ctrl->isr_data = NULL; + robo_switch++; + + } + + return robo_switch; + +} + +int spi_device_found = 0; + +#endif /* IPROC_CMICD || SF3 */ + + +static int +probe_robo_switch(void) +{ + int dev; + int max_devices, max_bustype; + uint8 buf[8]; + unsigned short phyidh = 0, phyidl = 0; +#if defined(KEYSTONE) + uint32 spi_freq = 0; +#endif +#if defined(IPROC_CMICD) + sal_vaddr_t addr_base; + uint32 data_reg; +#endif /* IPROC_CMICD */ + + + spin_lock_init(&bus_lock); + + if (_switch_ndevices) { + /* + * Currently skip probe robo if esw chips were found + * FIX this while combined plateform support. + */ + return robo_switch; + } + + /* Get Robo device handle */ + if (robo == NULL) { + sbh = (void *)SOC_ATTACH(NULL); + if (sbh == NULL) { + return -ENODEV; + } + } + +#if defined(IPROC_CMICD) && defined(BCM_STARFIGHTER3_SUPPORT) + robo_switch = probe_robo_switch_iproc_spi(); + + if (robo_switch > 0) { + /* Robo switch found by SPI probe */ + spi_device_found = 1; + gprintk("SPI device found, Skipping SRAB probe\n"); + return robo_switch; + } else { + gprintk("SPI device NOT found, Probe SRAB probe\n"); + ROBO_DETACH_SPI(robo); + } +#endif + + if (robo == NULL) { + robo = (void *)ROBO_ATTACH(sbh, 0); + } + if (robo == NULL) { + return -ENODEV; + } + + max_bustype = MAX_BUSTYPE + 1; + + while(_spi_device_valid_check(phyidh, 0, 0)) { + max_bustype --; + if(!max_bustype) + return -ENODEV; + ROBO_SWITCH_BUS(robo, max_bustype); + buf[0] = buf[1] = 0; + ROBO_RREG(robo, 0, 0x10, 0x04, buf, (uint)2); + phyidh = buf[0] | (buf[1] << 8); + /* re-try */ + if ((phyidh == 0x0) || (phyidh == 0xffff)) { + ROBO_RREG(robo, 0, 0x10, 0x04, buf, (uint)2); + phyidh = buf[0] | (buf[1] << 8); + } + } + + /* For psedo_phy access, only support one robo switch*/ + /* For Northstar, only one switch on SRAB interface */ + max_devices = (max_bustype == MAX_BUSTYPE) ? 1 : LINUX_BDE_MAX_SWITCH_DEVICES; + + for (dev = 0; dev < max_devices; dev++) { + bde_ctrl_t *ctrl; + int match_idx, i; + unsigned short phyidl_nr; /* phyidl with revision stripped */ + uint16 model_id; + uint8 rev_id; +#if defined(KEYSTONE) || defined(IPROC_CMICD) + uint32 addr, len; +#endif + uint32 mlen, op; + + if (_switch_ndevices >= LINUX_BDE_MAX_SWITCH_DEVICES) { + break; + } + buf[0] = buf[1] = 0; + ROBO_RREG(robo, dev, 0x10, 0x04, buf, (uint)2); + phyidh = buf[0] | (buf[1] << 8); + + buf[0] = buf[1] = 0; + ROBO_RREG(robo, dev, 0x10, 0x06, buf, (uint)2); + phyidl = buf[0] | (buf[1] << 8); + + /* Strip revision */ + phyidl_nr = phyidl & 0xfff0; + + match_idx = _spi_device_valid_check(phyidh, phyidl_nr, 1); + if (match_idx == -1) { + if (debug >= 1) gprintk("found %d robo device(s).\n", robo_switch); + break; + } + + if(_spi_id_table[match_idx].model_info){ +#if defined(KEYSTONE) || defined(IPROC_CMICD) + addr = _spi_id_table[match_idx].model_info & 0xffff; + len = (_spi_id_table[match_idx].model_info >> 16) & 0xf; +#endif + ROBO_RREG(robo, dev, (addr >> 8), (addr & 0xff), buf, (uint)len); + mlen = (_spi_id_table[match_idx].model_info >> 20) & 0xf; + model_id = 0; + for (i = 0; i < mlen; i++) + model_id |= buf[i] << (i << 3); + op = (_spi_id_table[match_idx].model_info >> 28) & 0xf; + if(op == 1) { + model_id |= phyidl_nr; +#if defined(IPROC_CMICD) + } else if (op == 2) { + /* The package id of NS+ is determined by : + * Write 0 to 0x18012120 (PAXB_0_CONFIG_IND_ADDR) + * Read 0x18012124 (PAX_B_CONFIG_IND_DATA), + * bits 31:16 will be the device id from OTP space + */ +#define PAXB_ENUM_BASE (0x18012000) +#define PAXB_CONFIG_IND_ADDR_OFFSET (0x120) +#define PAXB_CONFIG_IND_DATA_OFFSET (0x124) + + addr_base = (sal_vaddr_t)IOREMAP(PAXB_ENUM_BASE, 0x1000); + if (!addr_base) { + gprintk("ioremap of PAXB registers failed\n"); + } else { + writel(0x0, (uint32 *)(addr_base + + PAXB_CONFIG_IND_ADDR_OFFSET)); + data_reg = readl((uint32 *)(addr_base + + PAXB_CONFIG_IND_DATA_OFFSET)); + model_id = (data_reg >> 16); + iounmap((void *)addr_base); + + /* + * Some model ID can't be determined by PCIE device ID + * It needs to refer some OTP values. + */ + robo_model_id_adjust_from_otp(robo, &model_id); + } + +#undef PAXB_ENUM_BASE +#undef PAXB_CONFIG_IND_ADDR_OFFSET +#undef PAXB_CONFIG_IND_DATA_OFFSET +#endif /* IPROC_CMICD */ + } + } else { + model_id = phyidl_nr; + } + if(_spi_id_table[match_idx].rev_info){ +#if defined(KEYSTONE) || defined(IPROC_CMICD) + addr = _spi_id_table[match_idx].rev_info & 0xffff; + len = (_spi_id_table[match_idx].rev_info >> 16) & 0xf; +#endif + ROBO_RREG(robo, dev, (addr >> 8), (addr & 0xff), buf, (uint)len); + mlen = (_spi_id_table[match_idx].rev_info >> 20) & 0xf; + rev_id = 0; + for (i = 0; i < mlen; i++) + rev_id |= buf[i] << (i << 3); + } else { + rev_id = phyidl & 0xf; + } + gprintk("found robo device with %d:%04x:%04x:%04x:%02x\n", + dev, phyidh, phyidl, model_id, rev_id); + + ROBO_SELECT_DEVICE(robo, phyidh, phyidl); + + /* Match supported chips */ + ctrl = _devices + _ndevices++; + _switch_ndevices++; + + if (NULL == (ctrl->spi_device = (struct spi_dev *) + KMALLOC(sizeof(struct spi_dev), GFP_KERNEL))) { + gprintk("no memory available"); + return -ENOMEM; + } + ctrl->dev_type = (BDE_SPI_DEV_TYPE | BDE_SWITCH_DEV_TYPE); + ctrl->spi_device->cid = dev; + ctrl->spi_device->part = model_id; + ctrl->spi_device->rev = rev_id; + ctrl->spi_device->robo = robo; + ctrl->spi_device->phyid_high = phyidh; + ctrl->spi_device->phyid_low = phyidl; + ctrl->bde_dev.device = model_id; + ctrl->bde_dev.rev = rev_id; + ctrl->bde_dev.base_address = (sal_vaddr_t)NULL; + ctrl->isr = NULL; + ctrl->isr_data = NULL; + robo_switch++; + +#if defined(KEYSTONE) + spi_freq = _spi_id_table[match_idx].spifreq; +#endif + } + +#if defined(KEYSTONE) + /* Override the SPI frequency from user configuration */ + if (spifreq != 0) { + spi_freq = spifreq; + } + if (spi_freq != 0) { + /* + * The underlying chip can support the SPI frequency + * higher than default (2MHz). + */ + if (spi_freq != SPI_FREQ_DEFAULT) { + chipc_spi_set_freq(robo, 0, spi_freq); + } + } +#endif + return robo_switch; + +} + +#endif + +#if defined(BCM_METROCORE_LOCAL_BUS) +static bde_ctrl_t* +map_local_bus(uint64_t addr, uint32_t size) +{ + bde_ctrl_t *ctrl; + + ctrl = _devices + _ndevices++; + _switch_ndevices++; + + /* + * For now: use EB type as `local bus' + * (memory mapped, no DMA, no interrupts) + * metrocore local bus supports interrupts, but we don't use them. + */ + ctrl->dev_type |= BDE_EB_DEV_TYPE | BDE_SWITCH_DEV_TYPE + | (size > 64 * 1024 ? BDE_128K_REG_SPACE : 0); + ctrl->pci_device = NULL; /* No PCI bus */ + + /* Map in the device */ + ctrl->bde_dev.base_address = (sal_vaddr_t)IOREMAP(addr, size); + ctrl->phys_address = addr; + + return(ctrl); +} + +#define BME_REVISION_OFFSET (0x0) + +#endif + + +#ifdef BCM_METROCORE_LOCAL_BUS + /* + * SBX platform has both PCI- and local bus-attached devices + * The local bus devices have fixed address ranges (and don't + * support or require DMA), but are otherwise the same as PCI devices + */ +#define FPGA_IRQ 37 +#define FPGA_PHYS 0x100E0000 +#define BME_PHYS 0x100C0000 +#define SE_PHYS 0x100D0000 +#define FPGA_SIZE 0x00004000 +#define BME_SIZE 0x00004000 +#define MAC0_PHYS 0x100B0000 +#define MAC1_PHYS 0x100B8000 +#define MAC_SIZE 0x800 + + +/* + * Please refer to "Supervisor Fabric Module (SFM) Specification" + * page 23 for the following registers. + */ +#define FPGA_LC_POWER_DISABLE_OFFSET 0x4 +#define FPGA_LC_POWER_DISABLE_ENABLE_ALL_MASK 0x1e + +#define FPGA_LC_POWER_RESET_OFFSET 0x5 +#define FPGA_LC_POWER_RESET_ENABLE_ALL_MASK 0x1e + +#define FPGA_SW_SFM_MASTER_MODE_OFFSET 0x14 +#define FPGA_SW_SFM_MASTER_MODE_ENABLE_MASK 0x10 + + +static int +probe_metrocore_local_bus(void) { + bde_ctrl_t *ctrl; + uint32_t dev_rev_id; + VOL uint8_t *fpga; + + /* + * Write the FPGA on the fabric card, to let metrocore + * line cards out of reset. We actually don't bother to determine whether + * the card is a line card or a fabric card because when we do + * this on the line cards, it has no effect. + */ + fpga = (uint8_t *) IOREMAP(FPGA_PHYS, FPGA_SIZE); + fpga[FPGA_SW_SFM_MASTER_MODE_OFFSET] + |= FPGA_SW_SFM_MASTER_MODE_ENABLE_MASK; + fpga[FPGA_LC_POWER_DISABLE_OFFSET] + |= FPGA_LC_POWER_DISABLE_ENABLE_ALL_MASK; + fpga[FPGA_LC_POWER_RESET_OFFSET] + |= FPGA_LC_POWER_RESET_ENABLE_ALL_MASK; + + ctrl = map_local_bus(BME_PHYS, BME_SIZE); + + dev_rev_id = + *((uint32_t *) + (((uint8_t *) ctrl->bde_dev.base_address) + BME_REVISION_OFFSET)); + ctrl->bde_dev.device = dev_rev_id >> 16; + ctrl->bde_dev.rev = (dev_rev_id & 0xFF); + + if ((ctrl->bde_dev.device != BME3200_DEVICE_ID) && + (ctrl->bde_dev.device != BCM88130_DEVICE_ID)) { + gprintk("probe_metrocore_local_bus: wrong BME type: " + "0x%x (vs 0x%x or 0x%x)\n", + ctrl->bde_dev.device, BME3200_DEVICE_ID, BCM88130_DEVICE_ID); + return -1; + } + + ctrl->iLine = FPGA_IRQ; + ctrl->isr = NULL; + ctrl->isr_data = NULL; + + /* + * + * We start from SE & include the FPGA, which is 128k + */ + ctrl = map_local_bus(SE_PHYS, 128 * 1024); + + dev_rev_id = + *((uint32_t *) + (((uint8_t *) ctrl->bde_dev.base_address) + BME_REVISION_OFFSET)); + ctrl->bde_dev.device = dev_rev_id >> 16; + ctrl->bde_dev.rev = (dev_rev_id & 0xFF); + + if ((ctrl->bde_dev.device != BME3200_DEVICE_ID) && + (ctrl->bde_dev.device != BCM88130_DEVICE_ID)) { + gprintk("probe_metrocore_local_bus: wrong SE (BME) type: " + "0x%x (vs 0x%x)\n", + ctrl->bde_dev.device, BME3200_DEVICE_ID); + return -1; + } + + ctrl->iLine = FPGA_IRQ; + ctrl->isr = NULL; + ctrl->isr_data = NULL; + + return 0; +} +#endif + +#ifdef BCM_PLX9656_LOCAL_BUS + +#if 1 +#define DEV_REG_BASE_OFFSET PL0_OFFSET /* Polaris register base */ +#define DEV_REG_DEVID 0 /* Device ID is first register */ +#endif + +/* + * The difference at map_local_bus2: + * + * The PLX9656 PCI-to-LOCAL bridge chip already has been iomapped the + * whole address space. So the devices off local bus don't need to be + * mapped again. They only need to claim their own sub-space. + */ +static bde_ctrl_t * +map_local_bus2(bde_ctrl_t *plx_ctrl, uint32_t dev_base, uint32_t size) +{ + uint32_t dev_rev_id; + uint8_t *addr; + bde_ctrl_t *ctrl; + + ctrl = _devices + _ndevices++; + _switch_ndevices++; + + /* + * For now: use EB type as `local bus' + * (memory mapped, no DMA, no interrupts) + * metrocore local bus supports interrupts, but we don't use them. + */ + ctrl->dev_type |= BDE_EB_DEV_TYPE | BDE_SWITCH_DEV_TYPE; + ctrl->dev_type |= BDE_320K_REG_SPACE; /* Polaris 18 bits address + FPGA */ + ctrl->pci_device = NULL; /* No PCI bus */ + + /* Map in the device */ + ctrl->bde_dev.base_address = plx_ctrl->bde_dev.base_address + dev_base; + ctrl->phys_address = plx_ctrl->phys_address + (resource_size_t)dev_base; + +#if 1 + addr = (uint8_t *)ctrl->bde_dev.base_address + PL0_REVISION_REG; +#endif + dev_rev_id = readl(addr); + ctrl->bde_dev.device = dev_rev_id >> 16; + ctrl->bde_dev.rev = (dev_rev_id & 0xFF); + + switch (ctrl->bde_dev.device) { + case BCM88130_DEVICE_ID: + case BME3200_DEVICE_ID: + break; + default: + gprintk("wrong BME type: 0x%x (vs 0x%x or 0x%x)\n", + ctrl->bde_dev.device, BME3200_DEVICE_ID, BCM88130_DEVICE_ID); + return 0; + } + return(ctrl); +} + +static int +probe_plx_local_bus(void) +{ + bde_ctrl_t *ctrl; + uint32_t val; + uint8_t *addr; + char addr_hi_str[16]; + + if (num_plx > 1) { + printk(KERN_ERR "There's more than one PLX 9656/9056 chip\n"); + return -1; + } + addr_hi_str[0] = 0; +#ifdef PHYS_ADDR_IS_64BIT + sprintf(addr_hi_str, "%08x", (uint32_t)(plx_ctrl.phys_address >> 32)); +#endif + printk(KERN_ERR "Found PLX %04x:%04x vir: 0x%08x phy: 0x%s%08x\n", + plx_ctrl.bde_dev.device, plx_ctrl.bde_dev.rev, + plx_ctrl.bde_dev.base_address, addr_hi_str, + (uint32_t)(plx_ctrl.phys_address)); + + addr = (uint8_t *)plx_ctrl.bde_dev.base_address + CPLD_OFFSET + CPLD_REVISION_REG; + val = readl(addr); + printk(KERN_ERR "plx: CPLD revision %d\n", val & CPLD_REVISION_MASK); +#if 000 + addr = (uint8_t *)plx_ctrl.bde_dev.base_address + CPLD_OFFSET + CPLD_RESET_REG; + writel(CPLD_RESET_NONE, addr); +#endif +#if 1 + ctrl = map_local_bus2(&plx_ctrl, PL0_OFFSET, PL0_SIZE); +#endif + if (ctrl == 0) + return -1; + + /* Uses PLX IRQ for Polaris LC */ + ctrl->iLine = 48; + ctrl->isr = NULL; + ctrl->isr_data = NULL; + + return 0; +} + +#endif /* BCM_PLX9656_LOCAL_BUS */ + +#if defined(BCM_EA_SUPPORT) +#if defined(BCM_TK371X_SUPPORT) +static void +probe_tk371x_dev(void) +{ + bde_ctrl_t *ctrl; + int ea_uid=0; + + /* eadevices is from the argument of insmod */ + for (ea_uid = 0; ea_uid < eadevices; ea_uid++) { + ctrl = _devices + _ndevices++; + _switch_ndevices++; + ctrl->dev_type = (BDE_MII_DEV_TYPE | BDE_SWITCH_DEV_TYPE); + ctrl->bde_dev.device = TK371X_DEVICE_ID; + ctrl->bde_dev.rev = 0x0; + ctrl->bde_dev.base_address = (sal_vaddr_t)NULL; + ctrl->iLine = 0; + } +} +#endif /* BCM_TK371X_SUPPORT*/ +#endif /* BCM_EA_SUPPORT */ + + +#if defined(BCM_ROBO_SUPPORT) +#if defined(IPROC_CMICD) +struct chip_device_info { + uint32 cc_base; /* Chip-common register base */ + uint32 cc_size; /* Chip-common register limit */ + uint32 cid_reg_off; /* Chip id register offset */ +}; + +static struct chip_device_info _chip_table = { +#if defined(IPROC_CMICD) + 0x18000000, 0x00000300, 0x00000000 +#else + 0,0,0 +#endif +}; + +struct gmac_device_info { + uint32 cid; /* chip id */ + uint32 rid; /* revision id */ + uint32 pid; /* package id */ + + uint32 gmac_dev_id; /* gmac core device id */ + uint32 gmac_base_addr; /* gmac core base address */ + int gmac_irq; /* gmac irq number */ +}; + +static struct gmac_device_info _gmac_table[] = { +#if defined(IPROC_CMICD) + {BCM53010_CHIP_ID, 0, 0, BCM53010_GMAC_ID, 0x18026000, 181}, /* BCM53012 */ + {BCM53010_CHIP_ID, 0, 2, BCM53010_GMAC_ID, 0x18026000, 181}, /* BCM53011 */ + {BCM53010_CHIP_ID, 0, 1, BCM53010_GMAC_ID, 0x18026000, 181}, /* BCM53010 */ + {BCM53018_CHIP_ID, 0, 0, BCM53010_GMAC_ID, 0x18026000, 181}, /* BCM53018 */ + {BCM53018_CHIP_ID, 0, 2, BCM53010_GMAC_ID, 0x18026000, 181}, /* BCM53017 */ + {BCM53018_CHIP_ID, 0, 1, BCM53010_GMAC_ID, 0x18026000, 181}, /* BCM53019 */ + {BCM53020_CHIP_ID, 0, 0, BCM53010_GMAC_ID, 0x18024000, 181}, /* BCM53022 */ + {BCM53020_CHIP_ID, 4, 0, BCM53010_GMAC_ID, 0x18023000, 180}, /* BCM53022 */ +#endif + {0,0,0,0,0,0} +}; + +static sal_vaddr_t _cca_base = 0; + +static int +_gmac_dev_create(void) +{ + bde_ctrl_t *ctrl; + uint32 gmac_base = 0; + uint32 offset = 0; + uint32 cca_cid; + uint32 cid, rid, pid; + int i = 0, found; + + if (_chip_table.cc_base == 0) { + gprintk("Create GMAC device failed. Unable to identify CPU.\n"); + return -1; + } + + /* 1. Determine which CPU/GMAC configuration is now */ + _cca_base = (sal_vaddr_t)IOREMAP(_chip_table.cc_base, _chip_table.cc_size); + cca_cid = readl((uint32 *)(_cca_base + _chip_table.cid_reg_off)); + + cid = cca_cid & CID_ID_MASK; + rid = (cca_cid & CID_REV_MASK) >> CID_REV_SHIFT; + pid = (cca_cid & CID_PKG_MASK) >> CID_PKG_SHIFT; + + found = 0; + for (i = 0; ; i++) { + if (_gmac_table[i].cid == 0) { + /* End of table */ + break; + } + if ((_gmac_table[i].cid == cid) && + (_gmac_table[i].rid == rid) && + (_gmac_table[i].pid == pid)) { + /* found */ + found = 1; + break; + } + } + if (!found) { + gprintk("Create GMAC device failed. Unable to identify GMAC device.\n"); + } + + /* 2. Create GMAC device */ + /* fill-in necessary information depends on the CPU/GMAC configuration */ + if ((cid == BCM53010_CHIP_ID) || (cid == BCM53018_CHIP_ID) || + (cid == BCM53020_CHIP_ID)) { + ctrl = _devices + _ndevices++; + _ether_ndevices++; + + ctrl->dev_type |= BDE_ETHER_DEV_TYPE; + ctrl->dev_type |= BDE_PCI_DEV_TYPE; + + ctrl->iLine = _gmac_table[i].gmac_irq; + + ctrl->be_pio = 0; + + ctrl->bde_dev.rev = _gmac_table[i].rid; + ctrl->bde_dev.device = _gmac_table[i].gmac_dev_id; + + gmac_base = 0x18000000; + offset = _gmac_table[i].gmac_base_addr - gmac_base; + ctrl->bde_dev.base_address = (sal_vaddr_t)IOREMAP(gmac_base, 0x300000); + ctrl->alt_base_addr = ctrl->bde_dev.base_address + offset; + ctrl->phys_address = gmac_base; + + ctrl->isr = NULL; + ctrl->isr_data = NULL; + } + + return 0; +} +#endif +#endif + +/* + * Generic module functions + */ + +/* + * Function: _init + * + * Purpose: + * Module initialization. + * Attaches to kernel BDE. + * Parameters: + * None + * Returns: + * 0 on success, < 0 on error. + */ +static int +_init(void) +{ + +#ifdef IPROC_CMICD + if (iproc_has_cmicd()) { + iproc_cmicd_get_memregion(&iproc_cmicd_resources[IPROC_CMICD_RES_MEM]); + iproc_platform_driver_register(&iproc_cmicd_driver); +#ifdef CONFIG_OF + if (!of_find_compatible_node(NULL, NULL, IPROC_CMICD_COMPATIBLE)) +#endif + { + /* Register platform device if no device node in dtb */ + iproc_platform_device_register(&iproc_cmicd_pdev); + } + } +#endif /* IPROC_CMICD */ + +#ifdef BCM_ICS + _ics_bde_create(); +#else /* PCI */ + /* Register our goodies */ + _device_driver.name = LINUX_KERNEL_BDE_NAME; + +#if defined(BCM_ROBO_SUPPORT) +#if defined(IPROC_CMICD) + if (_gmac_dev_create()) { + return -ENODEV; + } +#endif +#endif /* defined (BCM_ROBO_SUPPORT) */ + + /* Configure MSI interrupt support */ + use_msi = usemsi; + +#ifdef CONFIG_PCI_MSI + if (use_msi == PCI_USE_INT_NONE) { + /* Compilation flag determines default value */ +#ifdef BDE_LINUX_USE_MSIX_INTERRUPT +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) + use_msi = PCI_USE_INT_MSIX; +#else + use_msi = PCI_USE_INT_MSI; +#endif +#elif defined(BDE_LINUX_USE_MSI_INTERRUPT) + use_msi = PCI_USE_INT_MSI; +#else + use_msi = PCI_USE_INT_INTX; +#endif + } +#else + if (use_msi > PCI_USE_INT_INTX) { + /* Warn if invalid configuration */ + gprintk("MSI interrupts not supported by kernel\n"); + } + use_msi = PCI_USE_INT_INTX; +#endif /* CONFIG_PCI_MSI */ + + if (unlikely(debug >= 1)) + gprintk("%s(%d):use_mse = %d\n", __func__, __LINE__, use_msi); + if (spi_devid) { + _spi_device_setup(); + } else { + if (pci_register_driver(&_device_driver) < 0) { + return -ENODEV; + } + } + + /* Note: PCI-PCI bridge uses results from pci_register_driver */ + p2p_bridge(); + +#ifdef BCM_METROCORE_LOCAL_BUS + if (probe_metrocore_local_bus()) { + return -1; + } +#endif +#ifdef BCM_PLX9656_LOCAL_BUS + if (num_plx > 0) { + probe_plx_local_bus(); + } +#endif +#endif /* BCM_ICS */ + +#ifdef BCM_ROBO_SUPPORT + probe_robo_switch(); +#endif + +#if defined(BCM_PETRA_SUPPORT) || defined(BCM_DFE_SUPPORT) || defined(BCM_DNX_SUPPORT) || defined(BCM_DNXF_SUPPORT) + sand_device_create(); +#endif + +#if defined(BCM_TK371X_SUPPORT) + probe_tk371x_dev(); +#endif + /* + * Probe for EB Bus devices. + */ + if (eb_bus) { + char *tok; + uint irq = -1, eb_rd16bit=0, eb_wr16bit =0; + unsigned int eb_ba = 0x0; + + gprintk("EB bus info: %s\n", eb_bus); + tok = strtok(eb_bus,","); + while (tok) { + _parse_eb_args(tok, "BA=%x IRQ=%d RD16=%d WR16=%d", + &eb_ba, &irq, &eb_rd16bit, &eb_wr16bit); + _eb_device_create(eb_ba, irq, eb_rd16bit, eb_wr16bit); + tok = strtok(NULL,","); + } + } + + _dma_init(robo_switch); + + /* + * In order to be backward compatible with the user mode BDE + * (specifically the interrupt IOCTLs) and the CM, switch devices + * *must* come first. If this is not the case (due to the probing + * order), we let the non-switch device(s) drop down to the end of + * the device array. + */ + if (_switch_ndevices > 0) { + bde_ctrl_t tmp_dev; + int i, s = 0; + + while (s < _switch_ndevices) { + if (_devices[s].dev_type & BDE_SWITCH_DEV_TYPE) { + s++; + continue; + } + tmp_dev = _devices[s]; + for (i = s; i < _ndevices - 1; i++) { + _devices[i] = _devices[i+1]; + } + _devices[i] = tmp_dev; + } + } + + /* Initialize device locks */ + if (_ndevices > 0) { + int i; + + for (i = 0; i < _ndevices; i++) { + spin_lock_init(&_devices[i].lock); + } + } + + return 0; +} + +/* + * Function: _cleanup + * + * Purpose: + * Module cleanup function. + * Parameters: + * None + * Returns: + * Always 0 + */ +static int +_cleanup(void) +{ + int i; + + _dma_cleanup(); + +#ifdef IPROC_CMICD + if (iproc_has_cmicd()) { +#ifdef CONFIG_OF + if (!of_find_compatible_node(NULL, NULL, IPROC_CMICD_COMPATIBLE)) +#endif + { + iproc_platform_device_unregister(&iproc_cmicd_pdev); + } + iproc_platform_driver_unregister(&iproc_cmicd_driver); + } +#endif + +#if defined(BCM_ROBO_SUPPORT) +#if defined(IPROC_CMICD) + if (_cca_base) { + iounmap((void *)_cca_base); + } +#endif + + if (robo) { +#if defined(KEYSTONE) || defined(IPROC_CMICD) + robo_detach(robo); +#endif /* KEYSTONE || IPROC_CMICD */ + } + if (sbh) { +#if defined(KEYSTONE) || defined(IPROC_CMICD) + ai_soc_detach(sbh); +#endif /* KEYSTONE || IPROC_CMICD */ + } +#endif + for (i = 0; i < _ndevices; i++) { + bde_ctrl_t *ctrl = _devices + i; + + /* free allocated kernel space memory */ + if (ctrl->dev_type & BDE_SPI_DEV_TYPE) { + if (ctrl->spi_device) { + kfree(ctrl->spi_device); + } + } + } +#if (defined(BCM_PETRA_SUPPORT) || defined(BCM_DFE_SUPPORT) || defined(BCM_DNX_SUPPORT) || defined(BCM_DNXF_SUPPORT)) && (defined(__DUNE_WRX_BCM_CPU__) || defined(__DUNE_GTO_BCM_CPU__)) + if (cpu_address) { /* unmap CPU card MMIO */ + iounmap(cpu_address); + cpu_address = NULL; + } +#endif + +#ifdef BCM_ICS +#else + pci_unregister_driver(&_device_driver); +#endif /* BCM_ICS */ + return 0; +} + +/* + * Function: _pprint + * + * Purpose: + * Print proc filesystem information. + * Parameters: + * None + * Returns: + * Always 0 + */ +static int +_pprint(void) +{ + int i = 0; + + pprintf("Broadcom Device Enumerator (%s)\n", LINUX_KERNEL_BDE_NAME); + + _dma_pprint(); + + if (_ndevices == 0) { + pprintf("No devices found\n"); + } else { + pprintf("Devices:\n"); + } + for (i = 0; i < _ndevices; i++) { + bde_ctrl_t *ctrl = _devices + i; + + if (ctrl->dev_type & BDE_SWITCH_DEV_TYPE) { + pprintf("\t%d (swi) : ", i); + } else if (ctrl->dev_type & BDE_ETHER_DEV_TYPE) { + pprintf("\t%d (eth) : ", i); + } else if (ctrl->dev_type & BDE_CPU_DEV_TYPE) { + pprintf("\t%d (cpu) : ", i); + } else { + pprintf("\t%d (?) : ", i); + } + + if (ctrl->dev_state == BDE_DEV_STATE_REMOVED) { + pprintf("PCI device 0x%x:0x%x:%d REMOVED\n", + ctrl->pci_device->vendor, + ctrl->pci_device->device, + ctrl->bde_dev.rev); + continue; + } + if (ctrl->dev_type & BDE_PCI_DEV_TYPE) { + pprintf("PCI device 0x%x:0x%x:%d:0x%.8lx:0x%.8lx:%d%s\n", + ctrl->pci_device->vendor, + ctrl->pci_device->device, + ctrl->bde_dev.rev, + (unsigned long)pci_resource_start(ctrl->pci_device, 0), + (unsigned long)pci_resource_start(ctrl->pci_device, 2), + ctrl->pci_device->irq, + ctrl->use_msi ? " (MSI)" : ""); + } else if (ctrl->dev_type & BDE_SPI_DEV_TYPE) { + pprintf("SPI Device %d:%x:%x:0x%x:0x%x:%d\n", + ctrl->spi_device->cid, + ctrl->spi_device->part, + ctrl->spi_device->rev, + ctrl->spi_device->phyid_high, + ctrl->spi_device->phyid_low, + ctrl->bde_dev.rev); + } else if (ctrl->dev_type & BDE_ICS_DEV_TYPE) { + pprintf("ICS Device 0x%x:0x%x\n", + ctrl->bde_dev.device, + ctrl->bde_dev.rev); + } else if (ctrl->dev_type & BDE_AXI_DEV_TYPE) { + pprintf("AXI Device 0x%x:0x%x:0x%.8lx:%d\n", + ctrl->bde_dev.device, + ctrl->bde_dev.rev, + (unsigned long)ctrl->phys_address, + ctrl->iLine); + } else if (ctrl->dev_type & BDE_EB_DEV_TYPE) { + pprintf("EB Bus Device 0x%x:0x%x\n", + ctrl->bde_dev.device, + ctrl->bde_dev.rev); + } + if (debug >= 1) { + pprintf("\t\timask:imask2:fmask 0x%x:0x%x:0x%x\n", + ctrl->imask, + ctrl->imask2, + ctrl->fmask); + } + } + return 0; +} + +#if USE_LINUX_BDE_MMAP +/* + * Some kernels (mainly x86) prevent mapping of kernel RAM memory to + * user space via the /dev/mem device. The function below provides a + * backdoor to mapping the DMA pool to user space via the + * /dev/linux-kernel-bde device. + */ +static int _mmap(struct file *filp, struct vm_area_struct *vma) +{ + unsigned long phys_addr = vma->vm_pgoff << PAGE_SHIFT; + unsigned long size = vma->vm_end - vma->vm_start; + + if(!_dma_range_valid(phys_addr, size)) { + return -EINVAL; + } + +#ifdef REMAP_DMA_NONCACHED + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); +#endif + + if (remap_pfn_range(vma, + vma->vm_start, + vma->vm_pgoff, + size, + vma->vm_page_prot)) { + gprintk("Failed to mmap phys range 0x%lx-0x%lx to 0x%lx-0x%lx\n", + phys_addr, phys_addr + size, vma->vm_start,vma->vm_end); + return -EAGAIN; + } + + return 0; +} +#endif /* USE_LINUX_BDE_MMAP */ + +/* Workaround for broken Busybox/PPC insmod */ +static char _modname[] = LINUX_KERNEL_BDE_NAME; + +static gmodule_t _gmodule = { + name: LINUX_KERNEL_BDE_NAME, + major: LINUX_KERNEL_BDE_MAJOR, + init: _init, + cleanup: _cleanup, + pprint: _pprint, +#if USE_LINUX_BDE_MMAP + mmap: _mmap, +#endif +}; + +gmodule_t * +gmodule_get(void) +{ + _gmodule.name = _modname; + return &_gmodule; +} + + +/* + * BDE Interface + */ + +static const char * +_name(void) +{ + return LINUX_KERNEL_BDE_NAME; +} + +static int +_num_devices(int type) +{ + switch (type) { + case BDE_ALL_DEVICES: + return _ndevices; + case BDE_SWITCH_DEVICES: + return _switch_ndevices; + case BDE_ETHER_DEVICES: + return _ether_ndevices; + case BDE_CPU_DEVICES: + return _cpu_ndevices; + } + + return 0; +} + +static const ibde_dev_t * +_get_dev(int d) +{ + if (!VALID_DEVICE(d)) { + gprintk("_get_dev: Invalid device index %d\n", d); + return NULL; + } + + return &_devices[d].bde_dev; +} + +static uint32 +_get_dev_type(int d) +{ + if (!VALID_DEVICE(d)) { + gprintk("_get_dev: Invalid device index %d\n", d); + return 0; + } + + return _devices[d].dev_type; +} + +static uint32 +_pci_conf_read(int d, uint32 addr) +{ +#ifdef BCM_ICS + return 0xFFFFFFFF; +#else + uint32 rc = 0; + + if (!VALID_DEVICE(d)) { + gprintk("_pci_conf_read: Invalid device index %d\n", d); + return 0xFFFFFFFF; + } + + if (!(_devices[d].dev_type & BDE_PCI_DEV_TYPE)) { + gprintk("_pci_conf_read: Not PCI device %d, type %x\n", + d, _devices[d].dev_type); + return 0xFFFFFFFF; + } + + pci_read_config_dword(_devices[d].pci_device, addr, &rc); + return rc; +#endif /* BCM_ICS */ +} + +static int +_pci_conf_write(int d, uint32 addr, uint32 data) +{ +#ifdef BCM_ICS + return -1; +#else + if (!VALID_DEVICE(d)) { + gprintk("_pci_conf_write: Invalid device index %d\n", d); + return -1; + } + + if (!(_devices[d].dev_type & BDE_PCI_DEV_TYPE)) { + gprintk("_pci_conf_write: Not PCI device %d, type %x\n", + d, _devices[d].dev_type); + return -1; + } + + pci_write_config_dword(_devices[d].pci_device, addr, data); + return 0; +#endif /* BCM_ICS */ +} + +/* Initialized when the bde is created */ +static linux_bde_bus_t _bus; + +static void +_pci_bus_features(int unit, int *be_pio, int *be_packet, int *be_other) +{ + if ((_devices[unit].bde_dev.device & 0xFF00) != 0x5600 && + (_devices[unit].bde_dev.device & 0xF000) != 0xc000 && + (_devices[unit].bde_dev.device & 0xF000) != 0xb000 && + (_devices[unit].bde_dev.device & 0xF000) != 0x8000 && + (_devices[unit].bde_dev.device & 0xFFF0) != 0x0230 && + (_devices[unit].bde_dev.device & 0xFFF0) != 0xa440) { + if (be_pio) *be_pio = 0; + if (be_packet) *be_packet = 0; + if (be_other) *be_other = 0; + } else { + if (be_pio) *be_pio = _bus.be_pio; + if (be_packet) *be_packet = _bus.be_packet; + if (be_other) *be_other = _bus.be_other; + } +#if defined(BCM_METROCORE_LOCAL_BUS) + if (_devices[unit].dev_type & BDE_EB_DEV_TYPE && be_pio) { + *be_pio = 1; + } +#endif + +} + +static uint32_t +_read(int d, uint32_t addr) +{ + unsigned long flags; + volatile uint16 msb, lsb; + uint32 sl_addr, data; + + if (!VALID_DEVICE(d)) { + return -1; + } + + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + return -1; + } + + if (_devices[d].dev_type & BDE_DEV_BUS_RD_16BIT) { + /* + * Adjust the address presented to Eb slave. Move A15:A0 to A16:A1. + */ + sl_addr = (addr & 0xffff0000) | ((addr & 0xffff) << 1); + /* Disable interrupts */ + spin_lock_irqsave(&bus_lock, flags); + + lsb = *((uint16 *)(_devices[d].bde_dev.base_address + sl_addr)); + msb = *((uint16 *)(_devices[d].bde_dev.base_address + sl_addr)); + spin_unlock_irqrestore(&bus_lock, flags); + + return (msb << 16) | lsb; + } else { + data = ((VOL uint32_t *)_devices[d].bde_dev.base_address)[addr / 4]; +#if defined(CMIC_SOFT_BYTE_SWAP) + data = CMIC_SWAP32(data); +#endif + return data; + } +} + +static int +_write(int d, uint32_t addr, uint32_t data) +{ + unsigned long flags; + uint32 sl_addr; + + if (!VALID_DEVICE(d)) { + return -1; + } + + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + return -1; + } + + if (_devices[d].dev_type & BDE_DEV_BUS_WR_16BIT) { + /* + * Adjust the address presented to Eb slave. Move A15:A0 to A16:A1. + */ + sl_addr = (addr & 0xffff0000) | ((addr & 0xffff) << 1); + + /* Disable interrupts */ + spin_lock_irqsave(&bus_lock, flags); + + *((VOL uint16 *)(_devices[d].bde_dev.base_address + sl_addr)) = + data & 0xffff; + *((VOL uint16 *)(_devices[d].bde_dev.base_address + sl_addr)) = + (data >> 16) & 0xffff; + spin_unlock_irqrestore(&bus_lock, flags); + } else { +#if defined(CMIC_SOFT_BYTE_SWAP) + data = CMIC_SWAP32(data); +#endif + ((VOL uint32_t *)_devices[d].bde_dev.base_address)[addr / 4] = data; +#ifdef KEYSTONE + /* Enforce PCIe transaction ordering. Commit the write transaction */ + __asm__ __volatile__("sync"); +#endif + } + return 0; + +} + +static _ISR_RET +_isr(_ISR_PARAMS(irq, dev_id, iregs)) +{ + bde_ctrl_t *ctrl = (bde_ctrl_t *) dev_id; + + if (ctrl && ctrl->isr) { + ctrl->isr(ctrl->isr_data); + } + if (ctrl && ctrl->isr2) { + ctrl->isr2(ctrl->isr2_data); + } + return IRQ_HANDLED; +} + +static int +_interrupt_connect(int d, + void (*isr)(void *), + void *isr_data) +{ + bde_ctrl_t *ctrl; + unsigned long irq_flags; + int isr2_dev; + int isr_active; + int ret = 0; + + isr2_dev = d & LKBDE_ISR2_DEV; + d &= ~LKBDE_ISR2_DEV; + + if (!VALID_DEVICE(d)) { + gprintk("_interrupt_connect: Invalid device index %d\n", d); + return -1; + } + if (debug >= 1) { + gprintk("_interrupt_connect d %d\n", d); + } + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + gprintk("_interrupt_connect: Not PCI device %d, type %x\n", + d, _devices[d].dev_type); + return -1; + } + + ctrl = _devices + d; + + isr_active = (ctrl->isr || ctrl->isr2) ? 1 : 0; + + if (unlikely(debug > 1)) + gprintk("%s:isr_active = %d\n", __func__, isr_active); + + if (isr2_dev) { + if (debug >= 1) { + gprintk("connect secondary isr\n"); + } + ctrl->isr2_data = isr_data; + ctrl->isr2 = isr; + if (isr_active) { + /* Main handler (_isr) already installed */ + return 0; + } + } else { + if (debug >= 1) { + gprintk("connect primary isr\n"); + } + ctrl->isr = isr; + ctrl->isr_data = isr_data; + if (isr_active) { + /* Main handler (_isr) already installed */ + return 0; + } + } + + if (ctrl->iLine != -1) { + irq_flags = IRQF_SHARED; +#ifdef CONFIG_PCI_MSI + if (ctrl->use_msi >= PCI_USE_INT_MSI) { + ret = _msi_connect(ctrl); + if(ret != 0) + goto msi_exit; + } +#endif +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) + if (ctrl->use_msi == PCI_USE_INT_MSIX) { + int i; + for (i = 0; i < ctrl->msix_cnt; i++) { + ret = request_irq(ctrl->entries[i].vector, _isr, + irq_flags, LINUX_KERNEL_BDE_NAME, ctrl); + if (ret < 0) + break; + } + if (ret < 0) { + while (i >= 0) + free_irq(ctrl->entries[i--].vector, ctrl->pci_device); + + goto err_disable_msi; + } + } + else +#endif + { + ret = request_irq(ctrl->iLine, _isr, irq_flags, + LINUX_KERNEL_BDE_NAME, ctrl); + if (ret < 0) + goto err_disable_msi; + + if (unlikely(debug >= 1)) + gprintk("%s(%d):device# = %d, \ + irq_flags = %lu, irq = %d\n", + __func__, __LINE__, d, + irq_flags, ctrl->pci_device ? ctrl->pci_device->irq : ctrl->iLine); + } + } + return 0; + +err_disable_msi: +#ifdef CONFIG_PCI_MSI + _msi_disconnect(ctrl); + +msi_exit: +#endif + gprintk("could not request IRQ\n"); + ctrl->isr = NULL; + ctrl->isr_data = NULL; + ctrl->isr2 = NULL; + ctrl->isr2_data = NULL; + + return -1; +} + +static int +_interrupt_disconnect(int d) +{ + bde_ctrl_t *ctrl; + int isr2_dev; + int isr_active; + + isr2_dev = d & LKBDE_ISR2_DEV; + d &= ~LKBDE_ISR2_DEV; + + if (!VALID_DEVICE(d)) { + return -1; + } + + if (debug >= 1) { + gprintk("_interrupt_disconnect d %d\n", d); + } + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + gprintk("_interrupt_disconnect: Not PCI device %d, type %x\n", + d, _devices[d].dev_type); + return -1; + } + + ctrl = _devices + d; + + isr_active = (ctrl->isr || ctrl->isr2) ? 1 : 0; + + if (unlikely(debug > 1)) + gprintk("%s: isr_active = %d\n", __func__, isr_active); + + if (isr2_dev) { + if (debug >= 1) { + gprintk("disconnect secondary isr\n"); + } + ctrl->isr2 = NULL; + ctrl->isr2_data = NULL; + ctrl->fmask = 0; + if (ctrl->isr) { + /* Primary handler still active */ + SYNC_IRQ(ctrl->iLine); + return 0; + } + } else { + if (debug >= 1) { + gprintk("disconnect primary isr\n"); + } + ctrl->isr = NULL; + ctrl->isr_data = NULL; + if (ctrl->isr2) { + /* Secondary handler still active */ + SYNC_IRQ(ctrl->iLine); + return 0; + } + } + + if (isr_active) { +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,84)) + if (ctrl->use_msi >= PCI_USE_INT_MSIX) { + int i; + for (i = 0; i < ctrl->msix_cnt; i++) + free_irq(ctrl->entries[i].vector, ctrl->pci_device); + } + else +#endif + { + free_irq(ctrl->iLine, ctrl); + } +#ifdef CONFIG_PCI_MSI + if (ctrl->use_msi >= PCI_USE_INT_MSI) { + _msi_disconnect(ctrl); + } +#endif + } + + return 0; +} + +static uint32_t +_iproc_ihost_read(int d, uint32_t addr) +{ + uint32_t *mapaddr; + uint32_t reg_val; + mapaddr = IOREMAP(addr, sizeof(uint32_t)); + if (mapaddr == NULL) { + return -1; + } + reg_val = readl(mapaddr); + iounmap(mapaddr); + return reg_val; +} + +static int +_iproc_ihost_write(int d, uint32_t addr, uint32_t data) +{ + uint32_t *mapaddr; + mapaddr = IOREMAP(addr, sizeof(uint32_t)); + if (mapaddr == NULL) { + return -1; + } + writel(data, mapaddr); + iounmap(mapaddr); + return 0; +} + +static uint32_t +_iproc_read(int d, uint32_t addr) +{ + if (!VALID_DEVICE(d)) { + return -1; + } + + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + return -1; + } + + if (_devices[d].dev_type & BDE_AXI_DEV_TYPE) { + return _iproc_ihost_read(d, addr); + } + + return shbde_iproc_pci_read(&_devices[d].shbde, + (void *)_devices[d].bde_dev.base_address1, + addr); +} + +static int +_iproc_write(int d, uint32_t addr, uint32_t data) +{ + if (!VALID_DEVICE(d)) { + return -1; + } + + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + return -1; + } + + if (_devices[d].dev_type & BDE_AXI_DEV_TYPE) { + return _iproc_ihost_write(d, addr, data); + } + + shbde_iproc_pci_write(&_devices[d].shbde, + (void *)_devices[d].bde_dev.base_address1, + addr, data); + + return 0; +} + +static int +_get_cmic_ver(int d , uint32_t *ver) +{ + + unsigned int cap_base; + uint32_t rval = 0; + + if (!VALID_DEVICE(d)) { + gprintk("%s: Invalid device index %d\n", __func__, d); + return -1; + } + + if (!(_devices[d].dev_type & BDE_PCI_DEV_TYPE)) { + gprintk("%s: Not PCI device %d, type %x\n", __func__, + d, _devices[d].dev_type); + return -1; + } + + /* Look for PCIe vendor-specific extended capability (VSEC) */ + cap_base = PCI_EXT_CAP_START; + while (cap_base) { + pci_read_config_dword(_devices[d].pci_device, cap_base, &rval); + if (rval == 0xffffffff) { + /* Assume PCI HW read error */ + gprintk("%s: PCI HW read error\n", __func__); + return -1; + } + + if (PCI_EXT_CAP_ID(rval) == PCI_EXT_CAP_ID_VNDR) { + break; + } + cap_base = PCI_EXT_CAP_NEXT(rval); + } + if (cap_base) { + /* + * VSEC layout: + * + * 0x00: PCI Express Extended Capability Header + * 0x04: Vendor-Specific Header + * 0x08: Vendor-Specific Register 1 + * 0x0c: Vendor-Specific Register 2 + * ... + * 0x24: Vendor-Specific Register 8 + */ + pci_read_config_dword(_devices[d].pci_device, cap_base + 8, &rval); + if (unlikely(debug > 1)) + gprintk("%s:Found VSEC = %u\n", __func__, rval); + + /* Determine if CMICX */ + rval = ((rval >> 12) & 0xf); + *ver = rval; + + return 0; + } else { + gprintk("%s:VSEC not found\n", __func__); + } + + return -1; +} + +#ifdef BCM_ROBO_SUPPORT +#define SOC_ROBO_PAGE_BP 8 /* for Robo Chip only */ + +#if defined(IPROC_CMICD) +extern int ccb_mii_read(int dev_type, int phy_addr, int reg_off, uint16 *data); +extern int ccb_mii_write(int dev_type, int phy_addr, int reg_off, uint16 data); + +/* device type */ +#define MII_DEV_LOCAL 0 +#define MII_DEV_EXT 1 +#endif + +static int +_spi_read(int d, uint32 addr, uint8 *buf, int len) +{ +#if defined(KEYSTONE) || defined(IPROC_CMICD) + bde_ctrl_t *ctrl; + uint8 page, offset; +#endif +#if defined(IPROC_CMICD) + int rv = 0; + uint16 value = 0; +#endif + + if (!VALID_DEVICE(d)) { + return -1; + } + + if (!(_devices[d].dev_type & BDE_SPI_DEV_TYPE)) { + gprintk("_spi_read: Not SPI device %d, type %x\n", + d, _devices[d].dev_type); + return -1; + } + +#if defined(KEYSTONE) || defined(IPROC_CMICD) + ctrl = _devices + d; +#endif + +#if defined(IPROC_CMICD) + if (addr & SOC_EXTERNAL_PHY_BUS_CPUMDIO) { + rv = ccb_mii_read(MII_DEV_EXT, (addr >> 8) & 0xff, addr & 0xff, &value); + memcpy(buf, &value, 2); + return rv; + } +#endif + +#if defined(KEYSTONE) || defined(IPROC_CMICD) + page = (addr >> SOC_ROBO_PAGE_BP) & 0xFF; + offset = addr & 0xFF; +#endif + +#if defined(IPROC_CMICD) && defined(BCM_STARFIGHTER3_SUPPORT) + if (spi_device_found) { + ROBO_SPI_RREG(ctrl->spi_device->robo, ctrl->spi_device->cid, + page, offset, buf, (uint)len); + } else +#endif + { + ROBO_RREG(ctrl->spi_device->robo, ctrl->spi_device->cid, + page, offset, buf, (uint)len); + } + + return 0; +} + +static int +_spi_write(int d, uint32 addr, uint8 *buf, int len) +{ +#if defined(KEYSTONE) || defined(IPROC_CMICD) + bde_ctrl_t *ctrl; + uint8 page, offset; +#endif +#if defined(IPROC_CMICD) + int rv = 0; + uint16 value = 0; +#endif + if (!VALID_DEVICE(d)) { + return -1; + } + + if (!(_devices[d].dev_type & BDE_SPI_DEV_TYPE)) { + gprintk("_spi_write: Not SPI device %d, type %x\n", + d, _devices[d].dev_type); + return -1; + } + +#if defined(KEYSTONE) || defined(IPROC_CMICD) + ctrl = _devices + d; +#endif + +#if defined(IPROC_CMICD) + if (addr & SOC_EXTERNAL_PHY_BUS_CPUMDIO) { + memcpy(&value, buf, 2); + rv = ccb_mii_write(MII_DEV_EXT, (addr >> 8) & 0xff, addr & 0xff, value); + return rv; + } +#endif + +#if defined(KEYSTONE) || defined(IPROC_CMICD) + page = (addr >> SOC_ROBO_PAGE_BP) & 0xFF; + offset = addr & 0xFF; +#endif + +#if defined(IPROC_CMICD) && defined(BCM_STARFIGHTER3_SUPPORT) + if (spi_device_found) { + ROBO_SPI_WREG(ctrl->spi_device->robo, ctrl->spi_device->cid, + page, offset, buf, (uint)len); + } else +#endif + { + ROBO_WREG(ctrl->spi_device->robo, ctrl->spi_device->cid, + page, offset, buf, (uint)len); + } + + return 0; +} + +#endif + +#if defined(BCM_PETRA_SUPPORT) || defined(BCM_DFE_SUPPORT) || defined(BCM_DNX_SUPPORT) || defined(BCM_DNXF_SUPPORT) +int +lkbde_cpu_write(int d, uint32 addr, uint32 *buf) +{ +#if defined(__DUNE_WRX_BCM_CPU__) || defined(__DUNE_GTO_BCM_CPU__) + *((uint32_t*)((uint8_t*)cpu_address + addr)) = *buf; +#endif + + return 0; +} + +int +lkbde_cpu_read(int d, uint32 addr, uint32 *buf) +{ +#if defined(__DUNE_WRX_BCM_CPU__) || defined(__DUNE_GTO_BCM_CPU__) + *buf = *((uint32_t*)((uint8_t*)cpu_address + addr)); +#else + *buf = (uint32_t)(-1); +#endif + + return 0; +} + +int +lkbde_cpu_pci_register(int d) +{ + bde_ctrl_t* ctrl; + uint16 cmd = 0; + + if (!VALID_DEVICE(d)) { + return -1; + } + + ctrl = &_devices[d]; + + /* enable device */ + if (pci_enable_device(ctrl->pci_device)) { + gprintk("Cannot enable pci device : vendor_id = %x, device_id = %x\n", + ctrl->pci_device->vendor, ctrl->pci_device->device); + } + + /* Add PCI_COMMAND_MEMORY and PCI_COMMAND_MASTER */ + pci_read_config_word(ctrl->pci_device, PCI_COMMAND, &cmd); + if (!(cmd & PCI_COMMAND_MEMORY) || !(cmd & PCI_COMMAND_MASTER)) { + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + pci_write_config_word(ctrl->pci_device, PCI_COMMAND, cmd); + } + + switch (ctrl->bde_dev.device) { + case GEDI_DEVICE_ID: + /* Fix bar 0 address */ /* FIXME: write full phy address */ + pci_write_config_byte(ctrl->pci_device, 0x13, 0x60); + + /* Fix Max payload size */ + pci_write_config_byte(ctrl->pci_device, 0x88, 0x2f); + pci_write_config_byte(ctrl->pci_device, 0x89, 0x10); + break; + case BCM88750_DEVICE_ID: + case BCM88753_DEVICE_ID: + case BCM88755_DEVICE_ID: + case BCM88770_DEVICE_ID: + case BCM88773_DEVICE_ID: + case BCM88774_DEVICE_ID: + case BCM88775_DEVICE_ID: + case BCM88776_DEVICE_ID: + case BCM88777_DEVICE_ID: + case BCM88950_DEVICE_ID: + case BCM88953_DEVICE_ID: + case BCM88954_DEVICE_ID: + case BCM88955_DEVICE_ID: + case BCM88956_DEVICE_ID: + case BCM88752_DEVICE_ID: + case BCM88772_DEVICE_ID: + case BCM88952_DEVICE_ID: + case ACP_PCI_DEVICE_ID: + case BCM88650_DEVICE_ID: + + case BCM88670_DEVICE_ID: + case BCM88671_DEVICE_ID: + case BCM88671M_DEVICE_ID: + case BCM88672_DEVICE_ID: + case BCM88673_DEVICE_ID: + case BCM88674_DEVICE_ID: + case BCM88675_DEVICE_ID: + case BCM88675M_DEVICE_ID: + case BCM88676_DEVICE_ID: + case BCM88676M_DEVICE_ID: + case BCM88677_DEVICE_ID: + case BCM88678_DEVICE_ID: + case BCM88679_DEVICE_ID: + + case BCM88370_DEVICE_ID: + case BCM88371_DEVICE_ID: + case BCM88371M_DEVICE_ID: + case BCM88375_DEVICE_ID: + case BCM88376_DEVICE_ID: + case BCM88376M_DEVICE_ID: + case BCM88377_DEVICE_ID: + case BCM88378_DEVICE_ID: + case BCM88379_DEVICE_ID: + case BCM88681_DEVICE_ID: + case BCM88682_DEVICE_ID: + case BCM88683_DEVICE_ID: + case BCM88684_DEVICE_ID: + case BCM88685_DEVICE_ID: + case BCM88380_DEVICE_ID: + case BCM88381_DEVICE_ID: + case BCM88680_DEVICE_ID: + case BCM88690_DEVICE_ID: + case BCM88470_DEVICE_ID: + case BCM88470P_DEVICE_ID: + case BCM88471_DEVICE_ID: + case BCM88473_DEVICE_ID: + case BCM88474_DEVICE_ID: + case BCM88474H_DEVICE_ID: + case BCM88476_DEVICE_ID: + case BCM88477_DEVICE_ID: + case BCM88270_DEVICE_ID: + case BCM88272_DEVICE_ID: + case BCM88273_DEVICE_ID: + case BCM88278_DEVICE_ID: + case BCM8206_DEVICE_ID: + case BCM88350_DEVICE_ID: + case BCM88351_DEVICE_ID: + case BCM88450_DEVICE_ID: + case BCM88451_DEVICE_ID: + case BCM88550_DEVICE_ID: + case BCM88551_DEVICE_ID: + case BCM88552_DEVICE_ID: + case BCM88651_DEVICE_ID: + case BCM88654_DEVICE_ID: + case BCM88660_DEVICE_ID: + case BCM88360_DEVICE_ID: + case BCM88361_DEVICE_ID: + case BCM88363_DEVICE_ID: + case BCM88460_DEVICE_ID: + case BCM88461_DEVICE_ID: + case BCM88560_DEVICE_ID: + case BCM88561_DEVICE_ID: + case BCM88562_DEVICE_ID: + case BCM88661_DEVICE_ID: + case BCM88664_DEVICE_ID: + /* Fix bar 0 address */ /* FIXME: write full phy address */ + pci_write_config_byte(ctrl->pci_device, 0x12, 0x10); + pci_write_config_byte(ctrl->pci_device, 0x13, 0x60); + + /* + * For DMA transactions - set Max_Payload_Size and + * Max_Read_Request_Size to 128 bytes. + */ + pci_write_config_byte(ctrl->pci_device, 0xb5, 0x0c); + pci_write_config_byte(ctrl->pci_device, 0xb4, 0x0); + break; + default: + break; + } + + /* Redo ioremap */ + if (ctrl->bde_dev.base_address) { + iounmap((void *)ctrl->bde_dev.base_address); + } + ctrl->bde_dev.base_address = (sal_vaddr_t)IOREMAP(ctrl->phys_address, 0x1000000); + + if (debug >= 1) { + gprintk("%s, %s(): info:\n", __FILE__, __FUNCTION__); + gprintk("_ndevices=%d, _switch_ndevices=%d\n", + _ndevices, _switch_ndevices); + gprintk("ctrl->dev_type=0x%x, ctrl->phys_address=0x%lx\n", + ctrl->dev_type, (unsigned long)ctrl->phys_address); + gprintk("ctrl->bde_dev.device=0x%x, ctrl->bde_dev.rev=0x%x, " + "ctrl->bde_dev.base_address=0x%lx\n", + ctrl->bde_dev.device, ctrl->bde_dev.rev, + (unsigned long)ctrl->bde_dev.base_address); + } + + return 0; +} + +/* + * Export Low level access function - currently for PCP DMA Kernel module. + */ +int +lkbde_mem_write(int d, uint32 addr, uint32 *buf) +{ + bde_ctrl_t* ctrl; + void *full_addr; + + if (!VALID_DEVICE(d)) return -1; + ctrl = &_devices[d]; + + full_addr = (void *)ctrl->bde_dev.base_address + addr; + *((uint32_t*)full_addr) = *buf; + return 0; +} +LKM_EXPORT_SYM(lkbde_mem_write); + +int +lkbde_mem_read(int d, uint32 addr, uint32 *buf) +{ + bde_ctrl_t* ctrl; + void *full_addr; + + if (!VALID_DEVICE(d)) return -1; + ctrl = &_devices[d]; + + full_addr = (void *)ctrl->bde_dev.base_address + addr; + *buf = *((uint32_t*)full_addr); + return 0; +} +LKM_EXPORT_SYM(lkbde_mem_read); +#endif /* defined(BCM_PETRA_SUPPORT) */ + +static ibde_t _ibde = { + name: _name, + num_devices: _num_devices, + get_dev: _get_dev, + get_dev_type: _get_dev_type, + pci_conf_read: _pci_conf_read, + pci_conf_write: _pci_conf_write, + pci_bus_features: _pci_bus_features, + read: _read, + write: _write, + salloc: _salloc, + sfree: _sfree, + sinval: _sinval, + sflush: _sflush, + interrupt_connect: _interrupt_connect, + interrupt_disconnect: _interrupt_disconnect, + l2p: _l2p, + p2l: _p2l, +#if defined(BCM_ROBO_SUPPORT) + spi_read: _spi_read, + spi_write: _spi_write, +#else + NULL, + NULL, +#endif /* defined(BCM_ROBO_SUPPORT) */ + iproc_read: _iproc_read, + iproc_write: _iproc_write, + get_cmic_ver: _get_cmic_ver, +}; + +/* + * Function: linux_bde_create + * + * Purpose: + * Creator function for this BDE interface. + * Parameters: + * bus - pointer to the bus features structure you want this + * bde to export. Depends on the system. + * ibde - pointer to a location to recieve the bde interface pointer. + * Returns: + * 0 on success + * -1 on failure. + * Notes: + * This is the main BDE create function for this interface. + * Used by the external system initialization code. + */ +int +linux_bde_create(linux_bde_bus_t *bus, ibde_t **ibde) +{ + + memset(&_bus, 0, sizeof(_bus)); + + if (bus) { + _bus = *bus; + } +#ifdef NONCOHERENT_DMA_MEMORY +#ifdef REMAP_DMA_NONCACHED + /* + * If we have a non-cached DMA memory pool + * there is no need to flush and invalidate. + */ + if (_dma_pool_allocated()) { + _ibde.sinval = NULL; + _ibde.sflush = NULL; + } +#endif +#else + _ibde.sinval = NULL; + _ibde.sflush = NULL; +#endif + *ibde = &_ibde; + return 0; +} + +/* + * Function: linux_bde_destroy + * + * Purpose: + * destroy this bde + * Parameters: + * BDE interface pointer + * Returns: + * 0 on success, < 0 on error. + */ +int +linux_bde_destroy(ibde_t *ibde) +{ + /* nothing */ + return 0; +} + +/* + * Backdoors provided by the kernel bde + */ + +uint32_t +lkbde_get_dev_phys(int d) +{ + if (!VALID_DEVICE(d)) { + return -1; + } + + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + gprintk("lkbde_get_dev_phys: Not PCI device %d, type %x\n", + d, _devices[d].dev_type); + return 0; + } + return _devices[d].phys_address; +} + +uint32_t +lkbde_get_dev_phys_hi(int d) +{ + if (!VALID_DEVICE(d)) { + return -1; + } + + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + gprintk("lkbde_get_dev_phys: Not PCI device %d, type %x\n", + d, _devices[d].dev_type); + return 0; + } +#ifdef PHYS_ADDR_IS_64BIT + return (uint32_t)(_devices[d].phys_address >> 32); +#else + return 0; +#endif +} + +void * +lkbde_get_dev_virt(int d) +{ + if (!VALID_DEVICE(d)) { + return NULL; + } + + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + gprintk("lkbde_get_dev_virt: Not PCI device %d, type %x\n", + d, _devices[d].dev_type); + return 0; + } + + if (_devices[d].alt_base_addr) { + return (void *)_devices[d].alt_base_addr; + } + + return (void *)_devices[d].bde_dev.base_address; +} + +int +lkbde_get_dev_resource(int d, int rsrc, uint32_t *flags, + uint32_t *phys_lo, uint32_t *phys_hi) +{ + if (!VALID_DEVICE(d)) { + return -1; + } + + *flags = 0; + *phys_lo = 0; + *phys_hi = 0; + + if (!(BDE_DEV_MEM_MAPPED(_devices[d].dev_type))) { + gprintk("lkbde_get_dev_phys: Not PCI device %d, type %x\n", + d, _devices[d].dev_type); + return 0; + } + + switch (rsrc) { + case 0: + *phys_lo = (uint32_t)(_devices[d].phys_address); +#ifdef PHYS_ADDR_IS_64BIT + *phys_hi = (uint32_t)(_devices[d].phys_address >> 32); +#endif + break; + case 1: + *phys_lo = (uint32_t)(_devices[d].phys_address1); +#ifdef PHYS_ADDR_IS_64BIT + *phys_hi = (uint32_t)(_devices[d].phys_address1 >> 32); +#endif + break; + default: + break; + } + + return 0; +} + +void * +lkbde_get_dma_dev(int d) +{ + if (!VALID_DEVICE(d)) { + return NULL; + } + +#ifdef LINUX_BDE_DMA_DEVICE_SUPPORT + return (void *)_devices[d].dma_dev; +#else + return (void *)_devices[d].pci_device; +#endif +} + +void * +lkbde_get_hw_dev(int d) +{ + if (!VALID_DEVICE(d)) { + return NULL; + } + + return (void *)_devices[d].pci_device; +} + +int +lkbde_dev_state_set(int d, uint32 state) +{ + bde_ctrl_t *ctrl; + + if (!VALID_DEVICE(d)) { + return -1; + } + ctrl = _devices + d; + ctrl->dev_state = state; + return 0; +} + +int +lkbde_dev_state_get(int d, uint32 *state) +{ + bde_ctrl_t *ctrl; + if (!VALID_DEVICE(d)) { + gprintk("_get_dev: Invalid device index %d\n", d); + return -1; + } + ctrl = _devices + d; + + *state = ctrl->dev_state; + return 0; +} + +int +lkbde_dev_instid_set(int d, uint32 instid) +{ + bde_ctrl_t *ctrl; + + if (!VALID_DEVICE(d)) { + return -1; + } + ctrl = _devices + d; + ctrl->inst_id = instid; + + return 0; +} + +int +lkbde_dev_instid_get(int d, uint32 *instid) +{ + bde_ctrl_t *ctrl; + + if (!VALID_DEVICE(d)) { + return -1; + } + ctrl = _devices + d; + *instid = ctrl->inst_id; + + return 0; +} +/* + * When a secondary interrupt handler is installed this function + * is used for synchronizing hardware access to the IRQ mask + * register. The secondary driver will supply a non-zero fmask + * (filter mask) to indicate which interrupt bits it controls. + * The fmask is ignored for the primary driver. + */ +int +lkbde_irq_mask_set(int d, uint32_t addr, uint32_t mask, uint32_t fmask) +{ + bde_ctrl_t *ctrl; + int isr2_dev; + unsigned long flags; + + isr2_dev = d & LKBDE_ISR2_DEV; + d &= ~LKBDE_ISR2_DEV; + + if (!VALID_DEVICE(d)) { + return -1; + } + + ctrl = _devices + d; + + /* Lock is required to synchronize access from user space */ + spin_lock_irqsave(&ctrl->lock, flags); + + if (isr2_dev) { + /* This is the secondary interrupt handler */ + ctrl->fmask = fmask; + ctrl->imask2 = mask & ctrl->fmask; + } else { + /* This is the primary interrupt handler */ + ctrl->imask = mask & ~ctrl->fmask; + } + _write(d, addr, ctrl->imask | ctrl->imask2); + + spin_unlock_irqrestore(&ctrl->lock, flags); + + return 0; +} + +/* + * When a secondary interrupt handler is installed, this function + * is used to avoid activating the user mode interrupt handler + * thread if all pending interrupts are handled in kernel space. + * + * The mask returned is the mask of all interrupts, it can be used + * to do a logical AND with fmask, the result will tell you if + * the user mode interrupt handler needs to be invoked. + * + * Note that if no secondary handler is installed, the value of + * "mask & fmask" will be zero, and hence there will be no need to read the + * current interrupt status from hardware (from kernel space). + */ +int +lkbde_irq_mask_get(int d, uint32_t *mask, uint32_t *fmask) +{ + bde_ctrl_t *ctrl; + + d &= ~LKBDE_ISR2_DEV; + + if (!VALID_DEVICE(d)) { + return -1; + } + + if (mask == NULL) { + return -1; + } + + ctrl = _devices + d; + + *fmask = ctrl->fmask; + *mask = ctrl->imask | ctrl->imask2; + + return 0; +} + + +/* + * Export functions + */ +LKM_EXPORT_SYM(linux_bde_create); +LKM_EXPORT_SYM(linux_bde_destroy); +LKM_EXPORT_SYM(lkbde_get_dev_phys); +LKM_EXPORT_SYM(lkbde_get_dev_virt); +LKM_EXPORT_SYM(lkbde_get_dev_resource); +LKM_EXPORT_SYM(lkbde_get_hw_dev); +LKM_EXPORT_SYM(lkbde_get_dma_dev); +LKM_EXPORT_SYM(lkbde_irq_mask_set); +LKM_EXPORT_SYM(lkbde_irq_mask_get); +LKM_EXPORT_SYM(lkbde_get_dev_phys_hi); +LKM_EXPORT_SYM(lkbde_dev_state_set); +LKM_EXPORT_SYM(lkbde_dev_state_get); +LKM_EXPORT_SYM(lkbde_dev_instid_set); +LKM_EXPORT_SYM(lkbde_dev_instid_get); +#if (defined(BCM_PETRA_SUPPORT) || defined(BCM_DFE_SUPPORT)) +LKM_EXPORT_SYM(lkbde_cpu_write); +LKM_EXPORT_SYM(lkbde_cpu_read); +LKM_EXPORT_SYM(lkbde_cpu_pci_register); +#endif diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_dma.c b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_dma.c new file mode 100644 index 000000000000..bd7eab6032e8 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_dma.c @@ -0,0 +1,906 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: linux_dma.c,v 1.414 Broadcom SDK $ + * $Copyright: (c) 2016 Broadcom Corp. + * All Rights Reserved.$ + * + * Linux Kernel BDE DMA memory allocation + * + * + * DMA memory allocation modes + * =========================== + * + * 1. Using private pool in kernel memory + * -------------------------------------- + * In this mode the BDE module will try to assemble a physically contiguous + * of memory using the kernel page allocator. This memory block is then + * administered by the mpool allocation functions. Note that once a system + * has been running for a while, the memory fragmentation may prevent the + * allocator from assembling a contiguous memory block, however, if the + * module is loaded shortly after system startup, it is very unlikely to + * fail. + * + * This allocation method is used by default. + * + * 2. Using private pool in high memory + * ------------------------------------ + * In this mode the BDE module will assume that unused physical memory is + * present at the high_memory address, i.e. memory not managed by the Linux + * memory manager. This memory block is mapped into kernel space and + * administered by the mpool allocation functions. High memory must be + * reserved using either the mem=xxx kernel parameter (recommended), or by + * hardcoding the memory limit in the kernel image. + * + * The module parameter himem=1 enables this allocation mode. + * + * 3. Using kernel allocators (kmalloc, __get_free_pages) + * ------------------------------------------------------ + * In this mode all DMA memory is allocated from the kernel on the fly, i.e. + * no private DMA memory pool will be created. If large memory blocks are + * only allocated at system startup (or not at all), this allocation method + * is the most flexible and memory-efficient, however, it is not recommended + * for non-coherent memory platforms due to an overall system performance + * degradation arising from the use of cache flush/invalidate instructions. + * + * The module parameter dmasize=0M enables this allocation mode, however if + * DMA memory is requested from a user mode application, a private memory + * pool will be created and used irrespectively. + */ + +#include +#include +#include +#include +#include + +#ifdef BCM_PLX9656_LOCAL_BUS +#include +#endif + +/* allocation types/methods for the DMA memory pool */ +#define ALLOC_TYPE_CHUNK 0 /* use small allocations and join them */ +#define ALLOC_TYPE_API 1 /* use one allocation */ +#if _SIMPLE_MEMORY_ALLOCATION_ +#include +#if defined(IPROC_CMICD) && defined(CONFIG_CMA) && defined(CONFIG_CMA_SIZE_MBYTES) +#define DMA_MAX_ALLOC_SIZE (CONFIG_CMA_SIZE_MBYTES * 1024 * 1024) +#else +#define DMA_MAX_ALLOC_SIZE (1 << (MAX_ORDER - 1 + PAGE_SHIFT)) /* Maximum size the kernel can allocate in one allocation */ +#endif +#endif /* _SIMPLE_MEMORY_ALLOCATION_ */ + +#if _SIMPLE_MEMORY_ALLOCATION_ == 1 +#define ALLOC_METHOD_DEFAULT ALLOC_TYPE_API +#else +#define ALLOC_METHOD_DEFAULT ALLOC_TYPE_CHUNK +#endif + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0)) +#include +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt +#endif + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)) +#define VIRT_TO_PAGE(p) virt_to_page((void*)(p)) +#else +#define VIRT_TO_PAGE(p) virt_to_page((p)) +#endif + +/* Compatibility */ +#ifdef LKM_2_4 +#define MEM_MAP_RESERVE mem_map_reserve +#define MEM_MAP_UNRESERVE mem_map_unreserve +#else /* LKM_2_6 */ +#define MEM_MAP_RESERVE SetPageReserved +#define MEM_MAP_UNRESERVE ClearPageReserved +#endif /* LKM_2_x */ + +#ifndef GFP_DMA32 +#define GFP_DMA32 0 +#endif + +/* Flags for memory allocations */ +#ifdef SAL_BDE_XLP +static int mem_flags = GFP_ATOMIC | GFP_KERNEL | GFP_DMA; +#else +#if defined(CONFIG_ZONE_DMA32) +static int mem_flags = GFP_ATOMIC | GFP_DMA32; +#else +static int mem_flags = GFP_ATOMIC | GFP_DMA; +#endif +#endif + +/* Debug output */ +static int dma_debug = 0; +module_param(dma_debug, int, 0); +MODULE_PARM_DESC(dma_debug, +"DMA debug output enable (default 0)."); + +/* DMA memory pool size */ +static char *dmasize; +LKM_MOD_PARAM(dmasize, "s", charp, 0); +MODULE_PARM_DESC(dmasize, +"Specify DMA memory size (default 4MB)"); + +/* Select DMA memory pool allocation method */ +static int dmaalloc = ALLOC_METHOD_DEFAULT; +LKM_MOD_PARAM(dmaalloc, "i", int, 0); +MODULE_PARM_DESC(dmaalloc, "Select DMA memory allocation method"); + +/* Use high memory for DMA */ +static char *himem; +LKM_MOD_PARAM(himem, "s", charp, 0); +MODULE_PARM_DESC(himem, +"Use high memory for DMA (default no)"); + +/* DMA memory allocation */ + +#define ONE_KB 1024 +#define ONE_MB (1024*1024) + +/* Default DMA memory size */ +#ifdef SAL_BDE_DMA_MEM_DEFAULT +#define DMA_MEM_DEFAULT (SAL_BDE_DMA_MEM_DEFAULT * ONE_MB) +#else +#define DMA_MEM_DEFAULT (8 * ONE_MB) +#endif +#define DMA_MEM_DEFAULT_ROBO (4 * ONE_MB) + +/* We try to assemble a contiguous segment from chunks of this size */ +#define DMA_BLOCK_SIZE (512 * ONE_KB) + +typedef struct _dma_segment { + struct list_head list; + unsigned long req_size; /* Requested DMA segment size */ + unsigned long blk_size; /* DMA block size */ + unsigned long blk_order; /* DMA block size in alternate format */ + unsigned long seg_size; /* Current DMA segment size */ + unsigned long seg_begin; /* Logical address of segment */ + unsigned long seg_end; /* Logical end address of segment */ + unsigned long *blk_ptr; /* Array of logical DMA block addresses */ + int blk_cnt_max; /* Maximum number of block to allocate */ + int blk_cnt; /* Current number of blocks allocated */ +} dma_segment_t; + +static unsigned int _dma_mem_size = DMA_MEM_DEFAULT; +static mpool_handle_t _dma_pool = NULL; +static void __iomem *_dma_vbase = NULL; +/* cpu physical address for mmap */ +static phys_addr_t _cpu_pbase = 0; +/* + * DMA bus address, it is either identical to cpu physical address + * or another address(IOVA) translated by IOMMU. + */ +static phys_addr_t _dma_pbase = 0; +static int _use_himem = 0; +static int _use_dma_mapping = 0; +static LIST_HEAD(_dma_seg); + +#define DMA_DEV(n) lkbde_get_dma_dev(n) + +/* + * Function: _find_largest_segment + * + * Purpose: + * Find largest contiguous segment from a pool of DMA blocks. + * Parameters: + * dseg - DMA segment descriptor + * Returns: + * 0 on success, < 0 on error. + * Notes: + * Assembly stops if a segment of the requested segment size + * has been obtained. + * + * Lower address bits of the DMA blocks are used as follows: + * 0: Untagged + * 1: Discarded block + * 2: Part of largest contiguous segment + * 3: Part of current contiguous segment + */ +static int +_find_largest_segment(dma_segment_t *dseg) +{ + int i, j, blks, found; + unsigned long b, e, a; + + blks = dseg->blk_cnt; + /* Clear all block tags */ + for (i = 0; i < blks; i++) { + dseg->blk_ptr[i] &= ~3; + } + for (i = 0; i < blks && dseg->seg_size < dseg->req_size; i++) { + /* First block must be an untagged block */ + if ((dseg->blk_ptr[i] & 3) == 0) { + /* Initial segment size is the block size */ + b = dseg->blk_ptr[i]; + e = b + dseg->blk_size; + dseg->blk_ptr[i] |= 3; + /* Loop looking for adjacent blocks */ + do { + found = 0; + for (j = i + 1; j < blks && (e - b) < dseg->req_size; j++) { + a = dseg->blk_ptr[j]; + /* Check untagged blocks only */ + if ((a & 3) == 0) { + if (a == (b - dseg->blk_size)) { + /* Found adjacent block below current segment */ + dseg->blk_ptr[j] |= 3; + b = a; + found = 1; + } else if (a == e) { + /* Found adjacent block above current segment */ + dseg->blk_ptr[j] |= 3; + e += dseg->blk_size; + found = 1; + } + } + } + } while (found); + if ((e - b) > dseg->seg_size) { + /* The current block is largest so far */ + dseg->seg_begin = b; + dseg->seg_end = e; + dseg->seg_size = e - b; + /* Re-tag current and previous largest segment */ + for (j = 0; j < blks; j++) { + if ((dseg->blk_ptr[j] & 3) == 3) { + /* Tag current segment as the largest */ + dseg->blk_ptr[j] &= ~1; + } else if ((dseg->blk_ptr[j] & 3) == 2) { + /* Discard previous largest segment */ + dseg->blk_ptr[j] ^= 3; + } + } + } else { + /* Discard all blocks in current segment */ + for (j = 0; j < blks; j++) { + if ((dseg->blk_ptr[j] & 3) == 3) { + dseg->blk_ptr[j] &= ~2; + } + } + } + } + } + return 0; +} + +/* + * Function: _alloc_dma_blocks + * + * Purpose: + * Allocate DMA blocks and add them to the pool. + * Parameters: + * dseg - DMA segment descriptor + * blks - number of DMA blocks to allocate + * Returns: + * 0 on success, < 0 on error. + * Notes: + * DMA blocks are allocated using the page allocator. + */ +static int +_alloc_dma_blocks(dma_segment_t *dseg, int blks) +{ + int i, start; + unsigned long addr; + + if (dseg->blk_cnt + blks > dseg->blk_cnt_max) { + gprintk("No more DMA blocks\n"); + return -1; + } + start = dseg->blk_cnt; + dseg->blk_cnt += blks; + for (i = start; i < dseg->blk_cnt; i++) { + /* + * Note that we cannot use pci_alloc_consistent when we + * want to be able to map DMA memory to user space. + * + * The GFP_DMA flag is omitted as this imposes the ISA + * addressing limitations on x86 platforms. As long as + * we have less than 1GB of memory, we can do PCI DMA + * to all physical RAM locations. + */ + addr = __get_free_pages(mem_flags, dseg->blk_order); + if (addr) { + dseg->blk_ptr[i] = addr; + } else { + gprintk("DMA allocation failed\n"); + return -1; + } + } + return 0; +} + +/* + * Function: _dma_segment_alloc + * + * Purpose: + * Allocate large physically contiguous DMA segment. + * Parameters: + * size - requested DMA segment size + * blk_size - assemble segment from blocks of this size + * Returns: + * DMA segment descriptor. + * Notes: + * Since we cannot allocate large blocks of contiguous + * memory from the kernel, we simply keep allocating + * smaller chunks until we can assemble a contiguous + * block of the desired size. + * + * When system allowed maximum bytes of memory has been allocated + * without a successful assembly of a contiguous DMA + * segment, the allocation function will return the + * largest contiguous segment found so far. It is up + * to the calling function to decide whether this + * amount is sufficient to proceed. + */ +static dma_segment_t * +_dma_segment_alloc(size_t size, size_t blk_size) +{ + dma_segment_t *dseg; + int i, blk_ptr_size; + unsigned long page_addr; + struct sysinfo si; + + /* Sanity check */ + if (size == 0 || blk_size == 0) { + return NULL; + } + /* Allocate an initialize DMA segment descriptor */ + if ((dseg = kmalloc(sizeof(dma_segment_t), GFP_KERNEL)) == NULL) { + return NULL; + } + memset(dseg, 0, sizeof(dma_segment_t)); + dseg->req_size = size; + dseg->blk_size = PAGE_ALIGN(blk_size); + while ((PAGE_SIZE << dseg->blk_order) < dseg->blk_size) { + dseg->blk_order++; + } + + si_meminfo(&si); + dseg->blk_cnt_max = (si.totalram << PAGE_SHIFT) / dseg->blk_size; + blk_ptr_size = dseg->blk_cnt_max * sizeof(unsigned long); + /* Allocate an initialize DMA block pool */ + dseg->blk_ptr = KMALLOC(blk_ptr_size, GFP_KERNEL); + if (dseg->blk_ptr == NULL) { + kfree(dseg); + return NULL; + } + memset(dseg->blk_ptr, 0, blk_ptr_size); + /* Allocate minimum number of blocks */ + _alloc_dma_blocks(dseg, dseg->req_size / dseg->blk_size); + /* Allocate more blocks until we have a complete segment */ + do { + _find_largest_segment(dseg); + if (dseg->seg_size >= dseg->req_size) { + break; + } + } while (_alloc_dma_blocks(dseg, 8) == 0); + /* Reserve all pages in the DMA segment and free unused blocks */ + for (i = 0; i < dseg->blk_cnt; i++) { + if ((dseg->blk_ptr[i] & 3) == 2) { + dseg->blk_ptr[i] &= ~3; + for (page_addr = dseg->blk_ptr[i]; + page_addr < dseg->blk_ptr[i] + dseg->blk_size; + page_addr += PAGE_SIZE) { + MEM_MAP_RESERVE(VIRT_TO_PAGE(page_addr)); + } + } else if (dseg->blk_ptr[i]) { + dseg->blk_ptr[i] &= ~3; + free_pages(dseg->blk_ptr[i], dseg->blk_order); + dseg->blk_ptr[i] = 0; + } + } + return dseg; +} + +/* + * Function: _dma_segment_free + * + * Purpose: + * Release resources used by DMA segment. + * Parameters: + * dseg - DMA segment descriptor + * Returns: + * Nothing. + */ +static void +_dma_segment_free(dma_segment_t *dseg) +{ + int i; + unsigned long page_addr; + + if (dseg->blk_ptr) { + for (i = 0; i < dseg->blk_cnt; i++) { + if (dseg->blk_ptr[i]) { + for (page_addr = dseg->blk_ptr[i]; + page_addr < dseg->blk_ptr[i] + dseg->blk_size; + page_addr += PAGE_SIZE) { + MEM_MAP_UNRESERVE(VIRT_TO_PAGE(page_addr)); + } + free_pages(dseg->blk_ptr[i], dseg->blk_order); + } + } + kfree(dseg->blk_ptr); + kfree(dseg); + } +} + +/* + * Function: _pgalloc + * + * Purpose: + * Allocate DMA memory using page allocator + * Parameters: + * size - number of bytes to allocate + * Returns: + * Pointer to allocated DMA memory or NULL if failure. + * Notes: + * For any sizes less than DMA_BLOCK_SIZE, we ask the page + * allocator for the entire memory block, otherwise we try + * to assemble a contiguous segment ourselves. + */ +static void * +_pgalloc(size_t size) +{ + dma_segment_t *dseg; + size_t blk_size; + + blk_size = (size < DMA_BLOCK_SIZE) ? size : DMA_BLOCK_SIZE; + if ((dseg = _dma_segment_alloc(size, blk_size)) == NULL) { + return NULL; + } + if (dseg->seg_size < size) { + /* If we didn't get the full size then forget it */ + _dma_segment_free(dseg); + return NULL; + } + list_add(&dseg->list, &_dma_seg); + return (void *)dseg->seg_begin; +} + +/* + * Function: _pgfree + * + * Purpose: + * Free memory allocated by _pgalloc + * Parameters: + * ptr - pointer returned by _pgalloc + * Returns: + * 0 if succesfully freed, otherwise -1. + */ +static int +_pgfree(void *ptr) +{ + struct list_head *pos; + list_for_each(pos, &_dma_seg) { + dma_segment_t *dseg = list_entry(pos, dma_segment_t, list); + if (ptr == (void *)dseg->seg_begin) { + list_del(&dseg->list); + _dma_segment_free(dseg); + return 0; + } + } + return -1; +} + +/* + * Function: _pgcleanup + * + * Purpose: + * Free all memory allocated by _pgalloc + * Parameters: + * None + * Returns: + * Nothing. + */ +static void +_pgcleanup(void) +{ + switch (dmaalloc) { +#if _SIMPLE_MEMORY_ALLOCATION_ + case ALLOC_TYPE_API: + if (_dma_vbase) { + if (dma_debug >= 1) gprintk("freeing v=%p p=0x%lx size=0x%lx\n", _dma_vbase,(unsigned long) _dma_pbase, (unsigned long)_dma_mem_size); + dma_free_coherent(DMA_DEV(0), _dma_mem_size, _dma_vbase, _dma_pbase); + } + break; +#endif /* _SIMPLE_MEMORY_ALLOCATION_ */ + + case ALLOC_TYPE_CHUNK: { + struct list_head *pos, *tmp; + if (_use_dma_mapping) { + dma_unmap_single(DMA_DEV(0), (dma_addr_t)_dma_pbase, _dma_mem_size, DMA_BIDIRECTIONAL); + _use_dma_mapping = 0; + } + list_for_each_safe(pos, tmp, &_dma_seg) { + dma_segment_t *dseg = list_entry(pos, dma_segment_t, list); + list_del(&dseg->list); + _dma_segment_free(dseg); + } + break; + } + + default: + gprintk("DMA memory allocation method dmaalloc=%d is not supported\n", dmaalloc); + } +} + +/* + * Function: _alloc_mpool + * + * Purpose: + * Allocate DMA memory pool + * Parameters: + * size - size of DMA memory pool + * Returns: + * Nothing. + * Notes: + * If set up to use high memory, we simply map the memory into + * kernel space. + * It is assumed there is only one pool. + */ +static void +_alloc_mpool(size_t size) +{ + unsigned long pbase = 0; + +#if defined(__arm__) && !defined(CONFIG_HIGHMEM) + if (_use_himem) { + gprintk("DMA in high memory requires CONFIG_HIGHMEM on ARM CPUs.\n"); + return; + } +#endif + + if (_use_himem) { + /* Use high memory for DMA */ + pbase = virt_to_bus(high_memory); + if (((pbase + (size - 1)) >> 16) > DMA_BIT_MASK(16)) { + gprintk("DMA in high memory at 0x%lx size 0x%lx is beyond the 4GB limit and not supported.\n", pbase, (unsigned long)size); + return; + } + _cpu_pbase = _dma_pbase = pbase; + _dma_vbase = IOREMAP(_dma_pbase, size); + } else { + /* Get DMA memory from kernel */ + switch (dmaalloc) { +#if _SIMPLE_MEMORY_ALLOCATION_ + case ALLOC_TYPE_API: { + size_t alloc_size = size; /* size of memory allocated in current iteration */ + if (alloc_size > DMA_MAX_ALLOC_SIZE) { + alloc_size = DMA_MAX_ALLOC_SIZE; + } + /* get a memory allocation from the kernel */ + { + dma_addr_t dma_handle; + if (!(_dma_vbase = dma_alloc_coherent(DMA_DEV(0), alloc_size, &dma_handle, GFP_KERNEL)) || !dma_handle) { + gprintk("_alloc_mpool: Kernel failed to allocate the memory pool of size 0x%lx\n", (unsigned long)alloc_size); + return; + } + pbase = dma_handle; + } + + if (alloc_size != size) { + gprintk("_alloc_mpool: allocated 0x%lx bytes instead of 0x%lx bytes.\n", + (unsigned long)alloc_size, (unsigned long)size); + } + size = _dma_mem_size = alloc_size; + break; + } +#endif /* _SIMPLE_MEMORY_ALLOCATION_ */ + + case ALLOC_TYPE_CHUNK: + _dma_vbase = _pgalloc(size); + if (DMA_DEV(0)) { + /* + * Use dma_map_single to obtain dma bus address or IOVA if iommu is present. + */ + pbase = dma_map_single(DMA_DEV(0), _dma_vbase, size, DMA_BIDIRECTIONAL); + _use_dma_mapping = 1; + } else { + pbase = virt_to_bus(_dma_vbase); + } + break; + default: + _dma_vbase = NULL; + pbase = 0; + gprintk("DMA memory allocation method dmaalloc=%d is not supported\n", dmaalloc); + } + + _dma_pbase = pbase; + + if (dma_debug >= 1) { + gprintk("_alloc_mpool:%s _dma_vbase:%p pbase:%lx allocated:%lx dmaalloc:%d\n", + DMA_DEV(0)?"dma_dev":"", _dma_vbase, pbase, (unsigned long)size, dmaalloc); + } + + if (((pbase + (size - 1)) >> 16) > DMA_BIT_MASK(16)) { + gprintk("DMA memory allocated at 0x%lx size 0x%lx is beyond the 4GB limit and not supported.\n", pbase, (unsigned long)size); + _pgcleanup(); + _dma_vbase = NULL; + _dma_pbase = 0; + return; + } + + if (_dma_vbase) { + _cpu_pbase = virt_to_bus(_dma_vbase); + if (dma_debug >= 1) gprintk("_cpu_pbase at %lx\n", (unsigned long)_cpu_pbase); + } +#ifdef REMAP_DMA_NONCACHED + _dma_vbase = IOREMAP(_dma_pbase, size); +#endif + + } +} + +/* + * Function: _dma_cleanup + * + * Purpose: + * DMA cleanup function. + * Parameters: + * None + * Returns: + * Always 0 + */ +int +_dma_cleanup(void) +{ + if (_dma_vbase) { + mpool_destroy(_dma_pool); + if (_use_himem) { + iounmap(_dma_vbase); + } else { +#ifdef REMAP_DMA_NONCACHED + iounmap(_dma_vbase); +#endif + _pgcleanup(); + } + _dma_vbase = NULL; + _dma_pbase = 0; + _cpu_pbase = 0; + } + return 0; +} + +void _dma_init(int robo_switch) +{ + /* DMA Setup */ + if (dmasize) { + if ((dmasize[strlen(dmasize)-1] & ~0x20) == 'M') { + _dma_mem_size = simple_strtoul(dmasize, NULL, 0); + _dma_mem_size *= ONE_MB; + } else { + gprintk("DMA memory size must be specified as e.g. dmasize=8M\n"); + } + if (_dma_mem_size & (_dma_mem_size-1)) { + gprintk("dmasize must be a power of 2 (1M, 2M, 4M, 8M etc.)\n"); + _dma_mem_size = 0; + } + } else { + if(robo_switch){ + _dma_mem_size = DMA_MEM_DEFAULT_ROBO; + } + } + + if (himem) { + if ((himem[0] & ~0x20) == 'Y' || himem[0] == '1') { + _use_himem = 1; + } else if ((himem[0] & ~0x20) == 'N' || himem[0] == '0') { + _use_himem = 0; + } + } + + if (_dma_mem_size) { + _alloc_mpool(_dma_mem_size); + if (_dma_vbase == NULL) { + gprintk("no DMA memory available\n"); + } + else { + mpool_init(); + _dma_pool = mpool_create(_dma_vbase, _dma_mem_size); + } + } +} + +#if USE_LINUX_BDE_MMAP +/* + * Function: _dma_range_valid + * + * Purpose: + * Check if DMA address range is valid. + * Parameters: + * phys_addr - start physical address + * size - range size + * Returns: + * 0 : not valid + * 1 : valid + */ +int +_dma_range_valid(unsigned long phys_addr, unsigned long size) +{ + unsigned long pool_start = _cpu_pbase; + unsigned long pool_end = pool_start + _dma_mem_size; + + if (phys_addr < pool_start || (phys_addr + size) > pool_end) { + gprintk("range 0x%lx-0x%lx outside DMA pool 0x%lx-0x%lx\n", + phys_addr, phys_addr + size, pool_start, pool_end); + return 0; + } + return 1; +} +#endif + +/* + * Function: _dma_pool_allocated + * + * Purpose: + * Check if DMA pool has been allocated. + * Parameters: + * None + * Returns: + * 0 : not allocated + * 1 : allocated + */ +int +_dma_pool_allocated(void) +{ + return (_dma_vbase) ? 1 : 0; +} + +sal_paddr_t +_l2p(int d, void *vaddr) +{ + if (_dma_mem_size) { + /* dma memory is a contiguous block */ + if (vaddr) { + return _dma_pbase + (PTR_TO_UINTPTR(vaddr) - PTR_TO_UINTPTR(_dma_vbase)); + } + return 0; + } + return ((sal_paddr_t)virt_to_bus(vaddr)); +} + +void * +_p2l(int d, sal_paddr_t paddr) +{ + sal_vaddr_t vaddr = (sal_vaddr_t)_dma_vbase; + + if (_dma_mem_size) { + /* DMA memory is a contiguous block */ + if (paddr == 0) { + return NULL; + } + return (void *)(vaddr + (sal_vaddr_t)(paddr - _dma_pbase)); + } + return bus_to_virt(paddr); +} + +/* + * Some of the driver malloc's are too large for + * kmalloc(), so 'sal_alloc' and 'sal_free' in the + * linux kernel sal cannot be implemented with kmalloc(). + * + * Instead, they expect someone to provide an allocator + * that can handle the gimongous size of some of the + * allocations, and we provide it here, by allocating + * this memory out of the boot-time dma pool. + * + * These are the functions in question: + */ + +void* kmalloc_giant(int sz) +{ + return mpool_alloc(_dma_pool, sz); +} + +void kfree_giant(void* ptr) +{ + return mpool_free(_dma_pool, ptr); +} + +uint32_t * +_salloc(int d, int size, const char *name) +{ + void *ptr; + + if (_dma_mem_size) { + return mpool_alloc(_dma_pool, size); + } + if ((ptr = kmalloc(size, mem_flags)) == NULL) { + ptr = _pgalloc(size); + } + return ptr; +} + +void +_sfree(int d, void *ptr) +{ + if (_dma_mem_size) { + return mpool_free(_dma_pool, ptr); + } + if (_pgfree(ptr) < 0) { + kfree(ptr); + } +} + +int +_sinval(int d, void *ptr, int length) +{ +#if defined(dma_cache_wback_inv) + dma_cache_wback_inv((unsigned long)ptr, length); +#else +#if defined(IPROC_CMICD) || defined(BCM958525) + /* FIXME: need proper function to replace dma_cache_sync */ + dma_sync_single_for_cpu(NULL, (unsigned long)ptr, length, DMA_BIDIRECTIONAL); +#else + dma_cache_sync(NULL, ptr, length, DMA_BIDIRECTIONAL); +#endif +#endif + return 0; +} + +int +_sflush(int d, void *ptr, int length) +{ +#if defined(dma_cache_wback_inv) + dma_cache_wback_inv((unsigned long)ptr, length); +#else +#if defined(IPROC_CMICD) || defined(BCM958525) + /* FIXME: need proper function to replace dma_cache_sync */ + dma_sync_single_for_cpu(NULL, (unsigned long)ptr, length, DMA_BIDIRECTIONAL); +#else + dma_cache_sync(NULL, ptr, length, DMA_BIDIRECTIONAL); +#endif +#endif + + return 0; +} + +int +lkbde_get_dma_info(phys_addr_t* cpu_pbase, phys_addr_t* dma_pbase, ssize_t* size) +{ + if (_dma_vbase == NULL) { + if (_dma_mem_size == 0) { + _dma_mem_size = DMA_MEM_DEFAULT; + } + _alloc_mpool(_dma_mem_size); + } + *cpu_pbase = _cpu_pbase; + *dma_pbase = _dma_pbase; + *size = (_dma_vbase) ? _dma_mem_size : 0; + return 0; +} + +void +_dma_pprint(void) +{ + pprintf("DMA Memory (%s): %d bytes, %d used, %d free%s\n", + (_use_himem) ? "high" : "kernel", + (_dma_vbase) ? _dma_mem_size : 0, + (_dma_vbase) ? mpool_usage(_dma_pool) : 0, + (_dma_vbase) ? _dma_mem_size - mpool_usage(_dma_pool) : 0, + USE_LINUX_BDE_MMAP ? ", local mmap" : ""); +} + +/* + * Export functions + */ +LKM_EXPORT_SYM(kmalloc_giant); +LKM_EXPORT_SYM(kfree_giant); +LKM_EXPORT_SYM(lkbde_get_dma_info); diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_shbde.c b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_shbde.c new file mode 100644 index 000000000000..312062b8464c --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_shbde.c @@ -0,0 +1,121 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: $ + * $Copyright: (c) 2014 Broadcom Corp. + * All Rights Reserved.$ + * + */ + +#include +#include +#include +#include "linux_shbde.h" + +/* Hardware abstractions for shared BDE functions */ + +static unsigned short +linux_pcic16_read(void *pci_dev, unsigned int addr) +{ + u16 data = 0; + + pci_read_config_word((struct pci_dev *)pci_dev, addr, &data); + + return data; +} + +static void +linux_pcic16_write(void *pci_dev, unsigned int addr, unsigned short data) +{ + pci_write_config_word((struct pci_dev *)pci_dev, addr, (u16)data); +} + +static unsigned int +linux_pcic32_read(void *pci_dev, unsigned int addr) +{ + u32 data = 0; + + pci_read_config_dword((struct pci_dev *)pci_dev, addr, &data); + + return data; +} + +static void +linux_pcic32_write(void *pci_dev, unsigned int addr, unsigned int data) +{ + pci_write_config_dword((struct pci_dev *)pci_dev, addr, (u32)data); +} + +static unsigned int +linux_io32_read(void *addr) +{ + return *((volatile u32 *)addr); +} + +static void +linux_io32_write(void *addr, unsigned int data) +{ + *((volatile u32 *)addr) = data; +} + +static void +linux_usleep(int usec) +{ + udelay(usec); +} + + +/* To get the PCI parent device under linux, from only the device pointer */ +static void * +linux_pci_parent_device_get(void *pci_dev) +{ + return (void *)(((struct pci_dev *)pci_dev)->bus->self); +} + + +/* + * Function: + * linux_shbde_hal_init + * Purpose: + * Initialize hardware abstraction module for Linux kernel. + * Parameters: + * shbde - pointer to uninitialized hardware abstraction module + * log_func - optional log output function + * Returns: + * Always 0 + */ +int +linux_shbde_hal_init(shbde_hal_t *shbde, shbde_log_func_t log_func) +{ + memset(shbde, 0, sizeof(*shbde)); + + shbde->log_func = log_func; + + shbde->pcic16_read = linux_pcic16_read; + shbde->pcic16_write = linux_pcic16_write; + shbde->pcic32_read = linux_pcic32_read; + shbde->pcic32_write = linux_pcic32_write; + + shbde->io32_read = linux_io32_read; + shbde->io32_write = linux_io32_write; + + shbde->usleep = linux_usleep; + + shbde->pci_parent_device_get = linux_pci_parent_device_get; + + return 0; +} diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_shbde.h b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_shbde.h new file mode 100644 index 000000000000..73d497925ed4 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/kernel/linux_shbde.h @@ -0,0 +1,34 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: $ + * $Copyright: (c) 2014 Broadcom Corp. + * All Rights Reserved.$ + * + */ + +#ifndef __LINUX_SHBDE_H__ +#define __LINUX_SHBDE_H__ + +#include +#include +#include + +extern int +linux_shbde_hal_init(shbde_hal_t *shbde, shbde_log_func_t log_func); + +#endif /* __LINUX_SHBDE_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/shared/mpool.c b/platform/broadcom/saibcm-modules/systems/bde/linux/shared/mpool.c new file mode 100644 index 000000000000..7f7332b3a7a4 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/shared/mpool.c @@ -0,0 +1,295 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: mpool.c,v 1.18 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +#include + +#ifdef __KERNEL__ + +/* + * Abstractions used when compiling for Linux kernel mode. + */ + +#include + +/* + * We cannot use the linux kernel SAL for MALLOC/FREE because + * the current implementation of sal_alloc() allocates memory + * out of an mpool created by this module... + */ +#define MALLOC(x) kmalloc(x, GFP_ATOMIC) +#define FREE(x) kfree(x) + +static spinlock_t _mpool_lock; +#define MPOOL_LOCK_INIT() spin_lock_init(&_mpool_lock) +#define MPOOL_LOCK() unsigned long flags; spin_lock_irqsave(&_mpool_lock, flags) +#define MPOOL_UNLOCK() spin_unlock_irqrestore(&_mpool_lock, flags) + +#else /* !__KERNEL__*/ + +/* + * Abstractions used when compiling for Linux user mode. + */ + +#include +#include + +#define MALLOC(x) malloc(x) +#define FREE(x) free(x) + +static sal_sem_t _mpool_lock; +#define MPOOL_LOCK_INIT() _mpool_lock = sal_sem_create("mpool_lock", 1, 1) +#define MPOOL_LOCK() sal_sem_take(_mpool_lock, sal_sem_FOREVER) +#define MPOOL_UNLOCK() sal_sem_give(_mpool_lock) + +#endif /* __KERNEL__ */ + +/* Allow external override for system cache line size */ +#ifndef BCM_CACHE_LINE_BYTES +#ifdef L1_CACHE_BYTES +#define BCM_CACHE_LINE_BYTES L1_CACHE_BYTES +#else +#define BCM_CACHE_LINE_BYTES 128 /* Should be fine on most platforms */ +#endif +#endif + +typedef struct mpool_mem_s { + unsigned char *address; + int size; + struct mpool_mem_s *next; +} mpool_mem_t; + +/* + * Function: mpool_init + * + * Purpose: + * Initialize mpool lock. + * Parameters: + * None + * Returns: + * Always 0 + */ +int +mpool_init(void) +{ + MPOOL_LOCK_INIT(); + return 0; +} + +#ifdef TRACK_DMA_USAGE +static int _dma_mem_used = 0; +#endif + +/* + * Function: mpool_alloc + * + * Purpose: + * Allocate memory block from mpool. + * Parameters: + * pool - mpool handle (from mpool_create) + * size - size of memory block to allocate + * Returns: + * Pointer to allocated memory block or NULL if allocation fails. + */ +void * +mpool_alloc(mpool_handle_t pool, int size) +{ + mpool_mem_t *ptr = pool, *newptr = NULL; + int mod; + + MPOOL_LOCK(); + + mod = size & (BCM_CACHE_LINE_BYTES - 1); + if (mod != 0 ) { + size += (BCM_CACHE_LINE_BYTES - mod); + } + while (ptr && ptr->next) { + if (ptr->next->address - (ptr->address + ptr->size) >= size) { + break; + } + ptr = ptr->next; + } + + if (!(ptr && ptr->next)) { + MPOOL_UNLOCK(); + return NULL; + } + newptr = MALLOC(sizeof(mpool_mem_t)); + if (!newptr) { + MPOOL_UNLOCK(); + return NULL; + } + + newptr->address = ptr->address + ptr->size; + newptr->size = size; + newptr->next = ptr->next; + ptr->next = newptr; +#ifdef TRACK_DMA_USAGE + _dma_mem_used += size; +#endif + MPOOL_UNLOCK(); + + return newptr->address; +} + + +/* + * Function: mpool_free + * + * Purpose: + * Free memory block allocated from mpool.. + * Parameters: + * pool - mpool handle (from mpool_create) + * addr - address of memory block to free + * Returns: + * Nothing + */ +void +mpool_free(mpool_handle_t pool, void *addr) +{ + unsigned char *address = (unsigned char *)addr; + mpool_mem_t *ptr = pool, *prev = NULL; + + MPOOL_LOCK(); + + while (ptr && ptr->next) { + if (ptr->next->address == address) { +#ifdef TRACK_DMA_USAGE + _dma_mem_used -= ptr->next->size; +#endif + break; + } + ptr = ptr->next; + } + + if (ptr && ptr->next) { + prev = ptr; + ptr = ptr->next; + prev->next = ptr->next; + FREE(ptr); + } + + MPOOL_UNLOCK(); +} + +/* + * Function: mpool_create + * + * Purpose: + * Create and initialize mpool control structures. + * Parameters: + * base_ptr - pointer to mpool memory block + * size - total size of mpool memory block + * Returns: + * mpool handle + * Notes + * The mpool handle returned must be used for subsequent + * memory allocations from the mpool. + */ +mpool_handle_t +mpool_create(void *base_ptr, int size) +{ + mpool_mem_t *head, *tail; + int mod = (int)(((unsigned long)base_ptr) & (BCM_CACHE_LINE_BYTES - 1)); + + MPOOL_LOCK(); + + if (mod) { + base_ptr = (char*)base_ptr + (BCM_CACHE_LINE_BYTES - mod); + size -= (BCM_CACHE_LINE_BYTES - mod); + } + size &= ~(BCM_CACHE_LINE_BYTES - 1); + + + head = (mpool_mem_t *)MALLOC(sizeof(mpool_mem_t)); + if (head == NULL) { + return NULL; + } + tail = (mpool_mem_t *)MALLOC(sizeof(mpool_mem_t)); + if (tail == NULL) { + FREE(head); + return NULL; + } + + head->size = tail->size = 0; + head->address = base_ptr; + tail->address = head->address + size; + head->next = tail; + tail->next = NULL; + + MPOOL_UNLOCK(); + + return head; +} + +/* + * Function: mpool_destroy + * + * Purpose: + * Free mpool control structures. + * Parameters: + * pool - mpool handle (from mpool_create) + * Returns: + * Always 0 + */ +int +mpool_destroy(mpool_handle_t pool) +{ + mpool_mem_t *ptr, *next; + + MPOOL_LOCK(); + + for (ptr = pool; ptr; ptr = next) { + next = ptr->next; + FREE(ptr); + } + + MPOOL_UNLOCK(); + + return 0; +} + +/* + * Function: mpool_usage + * + * Purpose: + * Report total sum of allocated mpool memory. + * Parameters: + * pool - mpool handle (from mpool_create) + * Returns: + * Number of bytes currently allocated using mpool_alloc. + */ +int +mpool_usage(mpool_handle_t pool) +{ + int usage = 0; + mpool_mem_t *ptr; + + MPOOL_LOCK(); + + for (ptr = pool; ptr; ptr = ptr->next) { + usage += ptr->size; + } + + MPOOL_UNLOCK(); + + return usage; +} diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/Makefile b/platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/Makefile new file mode 100644 index 000000000000..ac8b04ac9bcf --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/Makefile @@ -0,0 +1,71 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.1 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +LOCALDIR = systems/bde/linux/user/kernel + +# Make sure we build for the kernel if this is a user-mode build +ifneq ($(platform), ) +override-target=linux-$(platform) +endif + +include $(SDK)/make/Make.config + +LIBS = $(LIBDIR)/libkern.a + +ifneq ($(kernel_version),2_4) +KERNEL_MODULE_DIR = kernel_module + +THIS_MOD_NAME := linux-user-bde +MODULE = $(LIBDIR)/$(THIS_MOD_NAME).o +KMODULE = $(LIBDIR)/$(THIS_MOD_NAME).ko + +build: kernel_libs $(MODULE) $(KMODULE) +else +MODULE = $(LIBDIR)/linux-user-bde.o + +build: kernel_libs $(MODULE) +endif + +KBUILD_EXTRA_SYMBOLS := ${BLDDIR}/../../kernel/kernel_module/Module.symvers + +$(MODULE): $(BLDDIR)/.tree $(BOBJS) $(LIBS) + $(LD) $(MODULE_LDFLAGS) -r -d $(BOBJS) $(LIBS) -o $@ +ifneq ($(kernel_version),2_4) +$(KMODULE): $(MODULE) + rm -fr $(BLDDIR)/$(KERNEL_MODULE_DIR) + mkdir $(BLDDIR)/$(KERNEL_MODULE_DIR) + cp ${SDK}/make/Makefile.linux-kmodule $(BLDDIR)/$(KERNEL_MODULE_DIR)/Makefile + cat ${KBUILD_EXTRA_SYMBOLS} > $(BLDDIR)/$(KERNEL_MODULE_DIR)/Module.symvers + MOD_NAME=$(THIS_MOD_NAME) $(MAKE) -C $(BLDDIR)/$(KERNEL_MODULE_DIR) $(THIS_MOD_NAME).ko +endif + +kernel_libs: + $(MAKE) -C $(SDK)/systems/linux/kernel/modules/shared + +include $(SDK)/make/Make.depend + +# Make.depend is before clean:: so that Make.depend's clean:: runs first. + +clean:: + $(MAKE) -C $(SDK)/systems/linux/kernel/modules/shared $@ + $(RM) $(BOBJS) $(MODULE) + +.PHONY: build kernel_libs diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/linux-user-bde.c b/platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/linux-user-bde.c new file mode 100644 index 000000000000..c237f9429ef7 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/linux-user-bde.c @@ -0,0 +1,1264 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: linux-user-bde.c,v 1.80 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + * + * Linux User BDE Helper Module + */ +#include +#include +#include + +#include +#include +#include + +#include "linux-user-bde.h" + +#ifdef KEYSTONE +#include +#endif + + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("User BDE Helper Module"); +MODULE_LICENSE("GPL"); + +/* CMIC/CMICe defines */ +#define CMIC_IRQ_STAT 0x00000144 +#define CMIC_IRQ_MASK 0x00000148 +#define CMIC_IRQ_MASK_1 0x0000006C +#define CMIC_IRQ_MASK_2 0x00000070 + +/* CMICm defines */ +#define CMIC_CMCx_IRQ_STAT0_OFFSET(x) (0x31400 + (0x1000 * x)) +#define CMIC_CMCx_IRQ_STAT1_OFFSET(x) (0x31404 + (0x1000 * x)) +#define CMIC_CMCx_IRQ_STAT2_OFFSET(x) (0x31408 + (0x1000 * x)) +#define CMIC_CMCx_IRQ_STAT3_OFFSET(x) (0x3140c + (0x1000 * x)) +#define CMIC_CMCx_IRQ_STAT4_OFFSET(x) (0x31410 + (0x1000 * x)) + +#define CMIC_CMCx_PCIE_IRQ_MASK0_OFFSET(x) (0x31414 + (0x1000 * x)) +#define CMIC_CMCx_PCIE_IRQ_MASK1_OFFSET(x) (0x31418 + (0x1000 * x)) +#define CMIC_CMCx_PCIE_IRQ_MASK2_OFFSET(x) (0x3141c + (0x1000 * x)) +#define CMIC_CMCx_PCIE_IRQ_MASK3_OFFSET(x) (0x31420 + (0x1000 * x)) +#define CMIC_CMCx_PCIE_IRQ_MASK4_OFFSET(x) (0x31424 + (0x1000 * x)) + +/* CMICd defines */ +#define CMIC_CMCx_IRQ_STAT5_OFFSET(x) (0x314b0 + (0x1000 * x)) +#define CMIC_CMCx_IRQ_STAT6_OFFSET(x) (0x314b4 + (0x1000 * x)) +#define CMIC_CMCx_PCIE_IRQ_MASK5_OFFSET(x) (0x314b8 + (0x1000 * x)) +#define CMIC_CMCx_PCIE_IRQ_MASK6_OFFSET(x) (0x314bc + (0x1000 * x)) + +#define CMIC_CMCx_UC0_IRQ_MASK0_OFFSET(x) (0x31428 + (0x1000 * x)) +#define CMIC_CMCx_UC0_IRQ_MASK1_OFFSET(x) (0x3142c + (0x1000 * x)) +#define CMIC_CMCx_UC0_IRQ_MASK2_OFFSET(x) (0x31430 + (0x1000 * x)) +#define CMIC_CMCx_UC0_IRQ_MASK3_OFFSET(x) (0x31434 + (0x1000 * x)) +#define CMIC_CMCx_UC0_IRQ_MASK4_OFFSET(x) (0x31438 + (0x1000 * x)) + +/* CMICX defines */ +#define INTC_INTR_REG_NUM (8) + +#define INTC_INTR_ENABLE_REG0 (0x180130f0) +#define INTC_INTR_STATUS_REG0 (0x18013190) +#define INTC_INTR_RAW_STATUS_REG0 (0x18013140) + +#define INTC_INTR_ENABLE_BASE (INTC_INTR_ENABLE_REG0) +#define INTC_INTR_STATUS_BASE (INTC_INTR_STATUS_REG0) +#define INTC_INTR_RAW_STATUS_BASE (INTC_INTR_RAW_STATUS_REG0) + + +#define READ_INTC_INTR(d, reg, v) \ + (v = user_bde->iproc_read(d, reg)) +#define WRITE_INTC_INTR(d, reg, v) \ + (user_bde->iproc_write(d, reg, v)) + +/* Allow override of default CMICm CMC */ +#ifndef BDE_CMICM_PCIE_CMC +#define BDE_CMICM_PCIE_CMC 0 +#endif + +/* Allow override of default CMICm CMC */ +#ifndef BDE_CMICD_PCIE_CMC +#define BDE_CMICD_PCIE_CMC 0 +#endif + +/* Defines used to distinguish CMICe from CMICm */ +#define CMICE_DEV_REV_ID (0x178 / sizeof(uint32)) + +static ibde_t *user_bde = NULL; + +typedef void (*isr_f)(void *); + +typedef struct bde_ctrl_s { + uint32 dev_type; + int irq; + int enabled; + int devid; + isr_f isr; + uint32 *ba; + int inst; /* associate to _bde_inst_resource[] */ +} bde_ctrl_t; + +#define VALID_DEVICE(_n) (_n < LINUX_BDE_MAX_DEVICES) + +static bde_ctrl_t _devices[LINUX_BDE_MAX_DEVICES]; + +static wait_queue_head_t _ether_interrupt_wq; +static atomic_t _ether_interrupt_has_taken_place = ATOMIC_INIT(0); + +/* + * Multiple instance resource data structure. + * To keep the DMA resource per instance. + * And track the DMA pool usage. + */ +static int _bde_multi_inst = 0; + +typedef struct { + unsigned int inst_id; + unsigned int dma_offset; + unsigned int dma_size; + wait_queue_head_t intr_wq; + atomic_t intr; +} bde_inst_resource_t; + +static bde_inst_resource_t _bde_inst_resource[LINUX_BDE_MAX_DEVICES]; + +typedef struct { + phys_addr_t cpu_pbase; /* CPU physical base address of the DMA pool */ + phys_addr_t dma_pbase; /* Bus base address of the DMA pool */ + uint32 total_size; /* Total size of the pool in MB */ + uint32 offset; /* Current offset of the pool in MB */ +}_dma_pool_t; + +static _dma_pool_t _dma_pool; + +#define ONE_MB (1024 * 1024) + +#ifdef KEYSTONE +/* + * Enforce PCIE transaction ordering. Commit the write transaction. + */ + +#define SSOC_WRITEL(val, addr) \ + do { \ + writel((val), (addr)); \ + __asm__ __volatile__("sync"); \ + } while(0) + +#else + +#define SSOC_WRITEL(val, addr) \ + writel((val), (addr)) + +#endif +/* + * Function: _interrupt + * + * Purpose: + * Interrupt Handler. + * Mask all interrupts on device and wake up interrupt + * thread. It is assumed that the interrupt thread unmasks + * interrupts again when interrupt handling is complete. + * Parameters: + * ctrl - BDE control structure for this device. + * Returns: + * Nothing + */ +static void +_cmic_interrupt(bde_ctrl_t *ctrl) +{ + int d; + uint32_t mask = 0, stat, imask = 0, fmask = 0; + bde_inst_resource_t *res; + + d = (((uint8 *)ctrl - (uint8 *)_devices) / sizeof (bde_ctrl_t)); + res = &_bde_inst_resource[ctrl->inst]; + + /* Check for secondary interrupt handler */ + if (lkbde_irq_mask_get(d, &mask, &fmask) < 0) { + fmask = 0; + } + + if (fmask != 0) { + imask = mask & ~fmask; + /* Check for pending user mode interrupts */ + stat = user_bde->read(d, CMIC_IRQ_STAT); + if ((stat & imask) == 0) { + /* All handled in kernel mode */ + lkbde_irq_mask_set(d, CMIC_IRQ_MASK, imask, 0); + return; + } + } + + lkbde_irq_mask_set(d, CMIC_IRQ_MASK, 0, 0); + + atomic_set(&res->intr, 1); + +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + +static void +_cmicx_interrupt(bde_ctrl_t *ctrl) +{ + int d, i; + bde_inst_resource_t *res; + + d = (((uint8 *)ctrl - (uint8 *)_devices) / sizeof (bde_ctrl_t)); + res = &_bde_inst_resource[ctrl->inst]; + + /* Disable all interrupts.. Re-enable unserviced interrupts later + * So as to avoid getting new interrupts until the user level driver + * enumerates the interrupts to be serviced + */ + for (i = 0 ; i < INTC_INTR_REG_NUM ; i++) { + WRITE_INTC_INTR(d, (INTC_INTR_ENABLE_BASE + 4*i), 0); + } + + /* Notify */ + atomic_set(&res->intr, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + +static void +_cmicm_interrupt(bde_ctrl_t *ctrl) +{ + int d; + int cmc = BDE_CMICM_PCIE_CMC; + uint32 stat, mask = 0, fmask = 0, imask = 0; + bde_inst_resource_t *res; + + d = (((uint8 *)ctrl - (uint8 *)_devices) / sizeof (bde_ctrl_t)); + res = &_bde_inst_resource[ctrl->inst]; + + lkbde_irq_mask_get(d, &mask, &fmask); + + while (fmask) { + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT0_OFFSET(cmc)); + imask = mask & ~fmask; + if (stat & imask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT1_OFFSET(cmc)); + if (ctrl->dev_type & BDE_AXI_DEV_TYPE) { + mask = user_bde->read(d, CMIC_CMCx_UC0_IRQ_MASK1_OFFSET(cmc)); + } else { + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK1_OFFSET(cmc)); + } + if (stat & mask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT2_OFFSET(cmc)); + if (ctrl->dev_type & BDE_AXI_DEV_TYPE) { + mask = user_bde->read(d, CMIC_CMCx_UC0_IRQ_MASK2_OFFSET(cmc)); + } else { + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK2_OFFSET(cmc)); + } + if (stat & mask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT3_OFFSET(cmc)); + if (ctrl->dev_type & BDE_AXI_DEV_TYPE) { + mask = user_bde->read(d, CMIC_CMCx_UC0_IRQ_MASK3_OFFSET(cmc)); + } else { + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK3_OFFSET(cmc)); + } + if (stat & mask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT4_OFFSET(cmc)); + if (ctrl->dev_type & BDE_AXI_DEV_TYPE) { + mask = user_bde->read(d, CMIC_CMCx_UC0_IRQ_MASK4_OFFSET(cmc)); + } else { + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK4_OFFSET(cmc)); + } + if (stat & mask) { + break; + } + return; + } + + if (ctrl->dev_type & BDE_AXI_DEV_TYPE) { + lkbde_irq_mask_set(d, CMIC_CMCx_UC0_IRQ_MASK0_OFFSET(cmc), 0, 0); + user_bde->write(d, CMIC_CMCx_UC0_IRQ_MASK1_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_UC0_IRQ_MASK2_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_UC0_IRQ_MASK3_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_UC0_IRQ_MASK4_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_UC0_IRQ_MASK0_OFFSET(1), 0); + user_bde->write(d, CMIC_CMCx_UC0_IRQ_MASK0_OFFSET(2), 0); + } + else { + lkbde_irq_mask_set(d, CMIC_CMCx_PCIE_IRQ_MASK0_OFFSET(cmc), 0, 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK1_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK2_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK3_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK4_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK0_OFFSET(1), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK0_OFFSET(2), 0); + } + atomic_set(&res->intr, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + + +static void +_cmicd_interrupt(bde_ctrl_t *ctrl) +{ + int d; + int cmc = BDE_CMICD_PCIE_CMC; + uint32 stat, mask = 0, fmask = 0, imask = 0; + bde_inst_resource_t *res; + + d = (((uint8 *)ctrl - (uint8 *)_devices) / sizeof (bde_ctrl_t)); + res = &_bde_inst_resource[ctrl->inst]; + lkbde_irq_mask_get(d, &mask, &fmask); + + while (fmask) { + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT0_OFFSET(cmc)); + imask = mask & ~fmask; + if (stat & imask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT1_OFFSET(cmc)); + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK1_OFFSET(cmc)); + if (stat & mask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT2_OFFSET(cmc)); + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK2_OFFSET(cmc)); + if (stat & mask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT3_OFFSET(cmc)); + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK3_OFFSET(cmc)); + if (stat & mask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT4_OFFSET(cmc)); + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK4_OFFSET(cmc)); + if (stat & mask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT5_OFFSET(cmc)); + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK5_OFFSET(cmc)); + if (stat & mask) { + break; + } + stat = user_bde->read(d, CMIC_CMCx_IRQ_STAT6_OFFSET(cmc)); + mask = user_bde->read(d, CMIC_CMCx_PCIE_IRQ_MASK6_OFFSET(cmc)); + if (stat & mask) { + break; + } + return; + } + + lkbde_irq_mask_set(d, CMIC_CMCx_PCIE_IRQ_MASK0_OFFSET(cmc), 0, 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK1_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK2_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK3_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK4_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK5_OFFSET(cmc), 0); + user_bde->write(d, CMIC_CMCx_PCIE_IRQ_MASK6_OFFSET(cmc), 0); + + atomic_set(&res->intr, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + +static void +_bcm88750_interrupt(bde_ctrl_t *ctrl) +{ + int d; + bde_inst_resource_t *res; + + d = (((uint8 *)ctrl - (uint8 *)_devices) / sizeof (bde_ctrl_t)); + res = &_bde_inst_resource[ctrl->inst]; + lkbde_irq_mask_set(d, CMIC_IRQ_MASK, 0, 0); + + lkbde_irq_mask_set(d, CMIC_IRQ_MASK_1, 0, 0); + lkbde_irq_mask_set(d, CMIC_IRQ_MASK_2, 0, 0); + atomic_set(&res->intr, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + +static void +_qe2k_interrupt(bde_ctrl_t *ctrl) +{ + bde_inst_resource_t *res; + + res = &_bde_inst_resource[ctrl->inst]; + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x20/sizeof(uint32)); + + atomic_set(&res->intr, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + +static void +_fe2k_interrupt(bde_ctrl_t *ctrl) +{ + bde_inst_resource_t *res; + + res = &_bde_inst_resource[ctrl->inst]; + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x18/sizeof(uint32)); /* PC_INTERRUPT_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x24/sizeof(uint32)); /* PC_ERROR0_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x2c/sizeof(uint32)); /* PC_ERROR1_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x34/sizeof(uint32)); /* PC_UNIT_MASK */ + + atomic_set(&res->intr, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + +static void +_fe2kxt_interrupt(bde_ctrl_t *ctrl) +{ + bde_inst_resource_t *res; + + res = &_bde_inst_resource[ctrl->inst]; + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x2c/sizeof(uint32)); /* PC_INTERRUPT_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x38/sizeof(uint32)); /* PC_ERROR0_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x40/sizeof(uint32)); /* PC_ERROR1_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x50/sizeof(uint32)); /* PC_UNIT_MASK */ + + atomic_set(&res->intr, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + +static void +_bme3200_interrupt(bde_ctrl_t *ctrl) +{ + bde_inst_resource_t *res; + + res = &_bde_inst_resource[ctrl->inst]; + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x54/sizeof(uint32)); /* PI_PT_ERROR0 */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x5c/sizeof(uint32)); /* PI_PT_ERROR1 */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x64/sizeof(uint32)); /* PI_PT_ERROR2 */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x6c/sizeof(uint32)); /* PI_PT_ERROR3 */ + + atomic_set(&res->intr, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + + +static void +_bm9600_interrupt(bde_ctrl_t *ctrl) +{ + bde_inst_resource_t *res; + + res = &_bde_inst_resource[ctrl->inst]; + + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x5c/sizeof(uint32)); /* PI_INTERRUPT_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0xc/sizeof(uint32)); /* PI_UNIT_INTERRUPT0_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x14/sizeof(uint32)); /* PI_UNIT_INTERRUPT1_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x1c/sizeof(uint32)); /* PI_UNIT_INTERRUPT2_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x24/sizeof(uint32)); /* PI_UNIT_INTERRUPT3_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x2c/sizeof(uint32)); /* PI_UNIT_INTERRUPT4_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x34/sizeof(uint32)); /* PI_UNIT_INTERRUPT5_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x3c/sizeof(uint32)); /* PI_UNIT_INTERRUPT6_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x44/sizeof(uint32)); /* PI_UNIT_INTERRUPT7_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x4c/sizeof(uint32)); /* PI_UNIT_INTERRUPT8_MASK */ + SSOC_WRITEL(0xffffffff, ctrl->ba + 0x54/sizeof(uint32)); /* PI_UNIT_INTERRUPT9_MASK */ + + atomic_set(&res->intr, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&res->intr_wq); +#else + wake_up_interruptible(&res->intr_wq); +#endif +} + + + +/* The actual interrupt handler of ethernet devices */ +static void +_ether_interrupt(bde_ctrl_t *ctrl) +{ +#ifdef KEYSTONE + /* + * Since the two GMAC cores are sharing the same IRQ. + * Add the checking to handle the interrupt events. + */ + if ((ctrl->devid == BCM53000_GMAC_ID)) { + if ((readl(ctrl->ba + 0x020/4) & readl(ctrl->ba + 0x024/4)) == 0) { + return; + } + } +#endif + SSOC_WRITEL(0, ctrl->ba + 0x024/4); + + atomic_set(&_ether_interrupt_has_taken_place, 1); +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wake_up(&_ether_interrupt_wq); +#else + wake_up_interruptible(&_ether_interrupt_wq); +#endif +} + + +static struct _intr_mode_s { + isr_f isr; + const char *name; +} _intr_mode[] = { + { (isr_f)_cmic_interrupt, "CMIC/CMICe" }, + { (isr_f)_cmicm_interrupt, "CMICm" }, + { (isr_f)_cmicd_interrupt, "CMICd" }, + { (isr_f)_qe2k_interrupt, "QE2K" }, + { (isr_f)_fe2k_interrupt, "FE2K" }, + { (isr_f)_fe2kxt_interrupt, "FE2KXT" }, + { (isr_f)_bme3200_interrupt, "BME3200" }, + { (isr_f)_bm9600_interrupt, "BM9600" }, + { (isr_f)_bcm88750_interrupt, "BCM88750" }, + { (isr_f)_cmicx_interrupt, "CMICx" }, + { NULL, NULL } +}; + +static const char * +_intr_mode_str(void *isr) +{ + int imx; + + imx = 0; + while (_intr_mode[imx].isr != NULL) { + if (isr == _intr_mode[imx].isr) { + return _intr_mode[imx].name; + } + imx++; + } + return NULL; +} + +static void +_devices_init(int d) +{ + bde_ctrl_t *ctrl; + uint32 ver; + + ctrl = &_devices[d]; + /* Initialize our control info */ + ctrl->dev_type = user_bde->get_dev_type(d); + ctrl->devid = user_bde->get_dev(d)->device; + ctrl->inst = 0; + + if (BDE_DEV_MEM_MAPPED(ctrl->dev_type)) { + ctrl->enabled = 0; + ctrl->ba = lkbde_get_dev_virt(d); + } + if (ctrl->dev_type & BDE_SWITCH_DEV_TYPE) { + switch (user_bde->get_dev(d)->device) { + case QE2000_DEVICE_ID: + ctrl->isr = (isr_f)_qe2k_interrupt; + break; + case BCM88020_DEVICE_ID: + ctrl->isr = (isr_f)_fe2k_interrupt; + break; + case BCM88025_DEVICE_ID: + ctrl->isr = (isr_f)_fe2kxt_interrupt; + break; + case BME3200_DEVICE_ID: + ctrl->isr = (isr_f)_bme3200_interrupt; + break; + case BM9600_DEVICE_ID: + ctrl->isr = (isr_f)_bm9600_interrupt; + break; + case BCM88750_DEVICE_ID: + case BCM88753_DEVICE_ID: + case BCM88754_DEVICE_ID: + case BCM88755_DEVICE_ID: + case BCM88752_DEVICE_ID: + ctrl->isr = (isr_f)_bcm88750_interrupt; + break; + /* FIXME: might use _devices[i].dev_type & BDE_AXI_DEV_TYPE*/ + case BCM88670_DEVICE_ID: + case BCM88671_DEVICE_ID: + case BCM88671M_DEVICE_ID: + case BCM88672_DEVICE_ID: + case BCM88673_DEVICE_ID: + case BCM88674_DEVICE_ID: + case BCM88675_DEVICE_ID: + case BCM88675M_DEVICE_ID: + case BCM88676_DEVICE_ID: + case BCM88676M_DEVICE_ID: + case BCM88677_DEVICE_ID: + case BCM88678_DEVICE_ID: + case BCM88679_DEVICE_ID: + case BCM88370_DEVICE_ID: + case BCM88371_DEVICE_ID: + case BCM88371M_DEVICE_ID: + case BCM88375_DEVICE_ID: + case BCM88376_DEVICE_ID: + case BCM88376M_DEVICE_ID: + case BCM88377_DEVICE_ID: + case BCM88378_DEVICE_ID: + case BCM88379_DEVICE_ID: + case BCM88681_DEVICE_ID: + case BCM88682_DEVICE_ID: + case BCM88683_DEVICE_ID: + case BCM88684_DEVICE_ID: + case BCM88685_DEVICE_ID: + case BCM88380_DEVICE_ID: + case BCM88381_DEVICE_ID: + case BCM88680_DEVICE_ID: + case BCM88690_DEVICE_ID: + case BCM88770_DEVICE_ID: + case BCM88773_DEVICE_ID: + case BCM88774_DEVICE_ID: + case BCM88775_DEVICE_ID: + case BCM88776_DEVICE_ID: + case BCM88777_DEVICE_ID: + case BCM88470_DEVICE_ID: + case BCM88470P_DEVICE_ID: + case BCM88471_DEVICE_ID: + case BCM88473_DEVICE_ID: + case BCM88474_DEVICE_ID: + case BCM88474H_DEVICE_ID: + case BCM88476_DEVICE_ID: + case BCM88477_DEVICE_ID: + + case BCM88270_DEVICE_ID: + case BCM88272_DEVICE_ID: + case BCM88273_DEVICE_ID: + case BCM88278_DEVICE_ID: + case BCM8206_DEVICE_ID: + case BCM88950_DEVICE_ID: + case BCM88953_DEVICE_ID: + case BCM88954_DEVICE_ID: + case BCM88955_DEVICE_ID: + case BCM88956_DEVICE_ID: + case BCM88790_DEVICE_ID: + case BCM88772_DEVICE_ID: + case BCM88952_DEVICE_ID: + ctrl->isr = (isr_f)_cmicd_interrupt; + break; + default: + /* Get CMIC version */ + if (user_bde->get_cmic_ver(d, &ver) != 0) { + ver = -1; + } + /* check if version is CMICX */ + if (ver == 0x04) { + ctrl->isr = (isr_f)_cmicx_interrupt; + } else { + ctrl->isr = (isr_f)_cmic_interrupt; + if ((ctrl->dev_type & BDE_256K_REG_SPACE) && +#ifdef BCM_PETRA_SUPPORT /* FIXME remove code when hardware design is fixed */ + ctrl->devid != 0x1234 && +#endif + readl(ctrl->ba + CMICE_DEV_REV_ID) == 0) { + ctrl->isr = (isr_f)_cmicm_interrupt; + } + } + break; + } + if (_intr_mode_str(ctrl->isr) == NULL) { + gprintk("Warning: Unknown interrupt mode\n"); + } + } +} +/* + * Function: _init + * + * Purpose: + * Module initialization. + * Attaches to kernel BDE. + * Parameters: + * None + * Returns: + * Always 0 + */ +static int +_init(void) +{ + int i; + phys_addr_t cpu_pbase, dma_pbase; + ssize_t dmasize; + bde_inst_resource_t *res; + + /* Connect to the kernel bde */ + if ((linux_bde_create(NULL, &user_bde) < 0) || user_bde == NULL) { + return -ENODEV; + } + + init_waitqueue_head(&_ether_interrupt_wq); + + lkbde_get_dma_info(&cpu_pbase, &dma_pbase, &dmasize); + + memset(&_dma_pool, 0, sizeof(_dma_pool)); + _dma_pool.cpu_pbase = cpu_pbase; + _dma_pool.dma_pbase = dma_pbase; + _dma_pool.total_size = dmasize / ONE_MB; + + memset(_devices, 0, sizeof(_devices)); + + /* Use _bde_inst_resource[0] as the default resource */ + memset(_bde_inst_resource, 0, sizeof(_bde_inst_resource)); + res = &_bde_inst_resource[0]; + res->dma_offset = 0; + res->dma_size = _dma_pool.total_size; + init_waitqueue_head(&res->intr_wq); + atomic_set(&res->intr, 0); + + for (i = 0; i < user_bde->num_devices(BDE_ALL_DEVICES); i++) { + res->inst_id |= (1 << i); + _devices_init(i); + } + return 0; +} + +/* + * Function: _cleanup + * + * Purpose: + * Module cleanup function. + * Parameters: + * None + * Returns: + * Always 0 + */ +static int +_cleanup(void) +{ + int i; + + if (user_bde) { + for (i = 0; i < user_bde->num_devices(BDE_ALL_DEVICES); i++) { + if (_devices[i].enabled && + BDE_DEV_MEM_MAPPED(_devices[i].dev_type)) { + user_bde->interrupt_disconnect(i); + } + lkbde_dev_instid_set(i, 0); + } + linux_bde_destroy(user_bde); + user_bde = NULL; + } + return 0; +} + +/* + * Function: _pprint + * + * Purpose: + * Print proc filesystem information. + * Parameters: + * None + * Returns: + * Always 0 + */ +static int +_pprint(void) +{ + int idx; + const char *name; + bde_inst_resource_t *res; + uint32 state, instid; + + pprintf("Broadcom Device Enumerator (%s)\n", LINUX_USER_BDE_NAME); + for (idx = 0; idx < user_bde->num_devices(BDE_ALL_DEVICES); idx++) { + name = _intr_mode_str(_devices[idx].isr); + if (name == NULL) { + name = "unknown"; + } + pprintf("\t%d: Interrupt mode %s ",idx, name); + (void)lkbde_dev_state_get(idx, &state); + if (state == BDE_DEV_STATE_REMOVED) { + pprintf(" Device REMOVED ! \n"); + } else { + (void)lkbde_dev_instid_get(idx, &instid); + if (instid) { + pprintf("Inst id 0x%x\n",instid); + } else { + pprintf("\n"); + } + } + } + pprintf("Instance resource \n"); + + for (idx = 0; idx < user_bde->num_devices(BDE_ALL_DEVICES); idx++) { + res = &_bde_inst_resource[idx]; + if (res->inst_id) { + pprintf("\tDev mask 0x%x : " + "DMA offset %d size %d MB\n", + res->inst_id, + res->dma_offset, + res->dma_size); + } + } + + return 0; +} + +/* + * Allocate the DMA resource from DMA pool + * Parameter : + * dma_size (IN): allocate dma_size in MB + * dma_offset (OUT): dma offset in MB + */ +static int +_dma_resource_alloc(unsigned int dma_size, unsigned int *dma_offset) +{ + uint32 left; + + left = _dma_pool.total_size - _dma_pool.offset; + if (dma_size > left) { + gprintk("ERROR: Run out the dma resource!\n"); + return -1; + } + *dma_offset = _dma_pool.offset; + _dma_pool.offset += dma_size; + return 0; +} + +static int +_dma_resource_get(int inst_id, phys_addr_t *cpu_pbase, phys_addr_t *dma_pbase, ssize_t* size) +{ + int i; + unsigned int dma_size = 0, dma_offset = 0; + bde_inst_resource_t *res; + + for (i = 0; i < user_bde->num_devices(BDE_ALL_DEVICES); i++) { + res = &_bde_inst_resource[i]; + if (res->inst_id == inst_id) { + dma_size = res->dma_size; + dma_offset = res->dma_offset; + break; + } + } + + *cpu_pbase = _dma_pool.cpu_pbase + dma_offset * ONE_MB; + *dma_pbase = _dma_pool.dma_pbase + dma_offset * ONE_MB; + *size = dma_size * ONE_MB; + + return 0; +} + +static int +_instance_validate(unsigned int inst_id, unsigned int dmasize) +{ + int i; + bde_inst_resource_t *res; + + for (i = 0; i < user_bde->num_devices(BDE_ALL_DEVICES); i++) { + res = &_bde_inst_resource[i]; + if (res->inst_id == inst_id) { + if (res->dma_size != dmasize) { + if(_devices[i].inst == 0){ + /* Skip _instance_validate (not init yet) */ + return LUBDE_SUCCESS; + } + gprintk("ERROR: dma_size mismatch\n"); + return LUBDE_FAIL; + } + return (1); + } + } + return LUBDE_SUCCESS; +} + +static int +_device_reprobe(void) +{ + int i; + for (i = 0; i < user_bde->num_devices(BDE_ALL_DEVICES); i++) { + if (_devices[i].devid == 0) { + _devices_init(i); + } + } + return 0; +} + +static int +_instance_attach(unsigned int inst_id, unsigned int dma_size) +{ + unsigned int dma_offset; + int i, exist; + bde_inst_resource_t *res; + int inst_idx = -1; + uint32 instid; + + /* Reprobe the system for hot-plugged device */ + _device_reprobe(); + + /* Validate the resource with inst_id */ + exist = _instance_validate(inst_id, dma_size); + if (exist < 0) { + return LUBDE_FAIL; + } + if (exist > 0) { + return LUBDE_SUCCESS; + } + if (_dma_resource_alloc(dma_size, &dma_offset) < 0) { + return LUBDE_FAIL; + } + for (i = 0; i < user_bde->num_devices(BDE_ALL_DEVICES); i++) { + res = &_bde_inst_resource[i]; + if ((_bde_multi_inst == 0) || (res->inst_id == 0)) { + res->inst_id = inst_id; + res->dma_offset = dma_offset; + res->dma_size = dma_size; + _bde_multi_inst++; + inst_idx = i; + init_waitqueue_head(&res->intr_wq); + atomic_set(&res->intr, 0); + break; + } + } + + for (i = 0; i < user_bde->num_devices(BDE_ALL_DEVICES); i++) { + if (inst_id & (1 << i)) { + _devices[i].inst = inst_idx; + /* Pass the instid to the kernel BDE */ + if (lkbde_dev_instid_get(i, &instid) == 0) { + if (!instid) { + lkbde_dev_instid_set(i, inst_id); + } + } + } + } + + return LUBDE_SUCCESS; +} + +/* + * Function: _ioctl + * + * Purpose: + * Handle IOCTL commands from user mode. + * Parameters: + * cmd - IOCTL cmd + * arg - IOCTL parameters + * Returns: + * 0 on success, <0 on error + */ +static int +_ioctl(unsigned int cmd, unsigned long arg) +{ + lubde_ioctl_t io; + phys_addr_t cpu_pbase, dma_pbase; + ssize_t size; + const ibde_dev_t *bde_dev; + int inst_id; + bde_inst_resource_t *res; + + if (copy_from_user(&io, (void *)arg, sizeof(io))) { + return -EFAULT; + } + + io.rc = LUBDE_SUCCESS; + + switch(cmd) { + case LUBDE_VERSION: + io.d0 = KBDE_VERSION; + break; + case LUBDE_GET_NUM_DEVICES: + io.d0 = user_bde->num_devices(io.dev); + break; + case LUBDE_GET_DEVICE: + if (!VALID_DEVICE(io.dev)) { + return -EINVAL; + } + bde_dev = user_bde->get_dev(io.dev); + if (bde_dev) { + io.d0 = bde_dev->device; + io.d1 = bde_dev->rev; + if (BDE_DEV_MEM_MAPPED(_devices[io.dev].dev_type)) { + /* Get physical address to map */ + io.d2 = lkbde_get_dev_phys(io.dev); + io.d3 = lkbde_get_dev_phys_hi(io.dev); + } + } else { + io.rc = LUBDE_FAIL; + } + break; + case LUBDE_GET_DEVICE_TYPE: + if (!VALID_DEVICE(io.dev)) { + return -EINVAL; + } + io.d0 = _devices[io.dev].dev_type; + break; + case LUBDE_GET_BUS_FEATURES: + user_bde->pci_bus_features(io.dev, (int *) &io.d0, (int *) &io.d1, + (int *) &io.d2); + break; + case LUBDE_PCI_CONFIG_PUT32: + if (!VALID_DEVICE(io.dev)) { + return -EINVAL; + } + if (_devices[io.dev].dev_type & BDE_PCI_DEV_TYPE) { + user_bde->pci_conf_write(io.dev, io.d0, io.d1); + } else { + io.rc = LUBDE_FAIL; + } + break; + case LUBDE_PCI_CONFIG_GET32: + if (!VALID_DEVICE(io.dev)) { + return -EINVAL; + } + if (_devices[io.dev].dev_type & BDE_PCI_DEV_TYPE) { + io.d0 = user_bde->pci_conf_read(io.dev, io.d0); + } else { + io.rc = LUBDE_FAIL; + } + break; + case LUBDE_GET_DMA_INFO: + inst_id = io.dev; + if (_bde_multi_inst){ + _dma_resource_get(inst_id, &cpu_pbase, &dma_pbase, &size); + } else { + lkbde_get_dma_info(&cpu_pbase, &dma_pbase, &size); + } + io.d0 = dma_pbase; + io.d1 = size; + /* Optionally enable DMA mmap via /dev/linux-kernel-bde */ + io.d2 = USE_LINUX_BDE_MMAP; + /* Get physical address for mmap */ + io.dx.dw[0] = cpu_pbase; +#ifdef PHYS_ADDRS_ARE_64BITS + io.dx.dw[1] = cpu_pbase >> 32; +#else + io.dx.dw[1] = 0; +#endif + break; + case LUBDE_ENABLE_INTERRUPTS: + if (!VALID_DEVICE(io.dev)) { + return -EINVAL; + } + if (_devices[io.dev].dev_type & BDE_SWITCH_DEV_TYPE) { + if (_devices[io.dev].isr && !_devices[io.dev].enabled) { + user_bde->interrupt_connect(io.dev, + _devices[io.dev].isr, + _devices+io.dev); + _devices[io.dev].enabled = 1; + } + } else { + /* Process ethernet device interrupt */ + /* FIXME: for multiple chips */ + if (!_devices[io.dev].enabled) { + user_bde->interrupt_connect(io.dev, + (void(*)(void *))_ether_interrupt, + _devices+io.dev); + _devices[io.dev].enabled = 1; + } + } + break; + case LUBDE_DISABLE_INTERRUPTS: + if (!VALID_DEVICE(io.dev)) { + return -EINVAL; + } + if (_devices[io.dev].enabled) { + user_bde->interrupt_disconnect(io.dev); + _devices[io.dev].enabled = 0; + } + break; + case LUBDE_WAIT_FOR_INTERRUPT: + if (!VALID_DEVICE(io.dev)) { + return -EINVAL; + } + if (_devices[io.dev].dev_type & BDE_SWITCH_DEV_TYPE) { + res = &_bde_inst_resource[_devices[io.dev].inst]; +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wait_event_timeout(res->intr_wq, + atomic_read(&res->intr) != 0, 100); + +#else + wait_event_interruptible(res->intr_wq, + atomic_read(&res->intr) != 0); +#endif + /* + * Even if we get multiple interrupts, we + * only run the interrupt handler once. + */ + atomic_set(&res->intr, 0); + } else { +#ifdef BDE_LINUX_NON_INTERRUPTIBLE + wait_event_timeout(_ether_interrupt_wq, + atomic_read(&_ether_interrupt_has_taken_place) != 0, 100); +#else + wait_event_interruptible(_ether_interrupt_wq, + atomic_read(&_ether_interrupt_has_taken_place) != 0); +#endif + /* + * Even if we get multiple interrupts, we + * only run the interrupt handler once. + */ + atomic_set(&_ether_interrupt_has_taken_place, 0); + } + break; + case LUBDE_USLEEP: + sal_usleep(io.d0); + break; + case LUBDE_UDELAY: + sal_udelay(io.d0); + break; + case LUBDE_SEM_OP: + switch (io.d0) { + case LUBDE_SEM_OP_CREATE: + io.p0 = (bde_kernel_addr_t)sal_sem_create("", io.d1, io.d2); + break; + case LUBDE_SEM_OP_DESTROY: + sal_sem_destroy((sal_sem_t)io.p0); + break; + case LUBDE_SEM_OP_TAKE: + io.rc = sal_sem_take((sal_sem_t)io.p0, io.d2); + break; + case LUBDE_SEM_OP_GIVE: + io.rc = sal_sem_give((sal_sem_t)io.p0); + break; + default: + io.rc = LUBDE_FAIL; + break; + } + break; + case LUBDE_WRITE_IRQ_MASK: + io.rc = lkbde_irq_mask_set(io.dev, io.d0, io.d1, 0); + break; + case LUBDE_SPI_READ_REG: + if (user_bde->spi_read(io.dev, io.d0, io.dx.buf, io.d1) == -1) { + io.rc = LUBDE_FAIL; + } + break; + case LUBDE_SPI_WRITE_REG: + if (user_bde->spi_write(io.dev, io.d0, io.dx.buf, io.d1) == -1) { + io.rc = LUBDE_FAIL; + } + break; + case LUBDE_READ_REG_16BIT_BUS: + io.d1 = user_bde->read(io.dev, io.d0); + break; + case LUBDE_WRITE_REG_16BIT_BUS: + io.rc = user_bde->write(io.dev, io.d0, io.d1); + break; +#if (defined(BCM_PETRA_SUPPORT) || defined(BCM_DFE_SUPPORT)) + case LUBDE_CPU_WRITE_REG: + { + if (lkbde_cpu_write(io.dev, io.d0, (uint32*)io.dx.buf) == -1) { + io.rc = LUBDE_FAIL; + } + break; + } + case LUBDE_CPU_READ_REG: + { + if (lkbde_cpu_read(io.dev, io.d0, (uint32*)io.dx.buf) == -1) { + io.rc = LUBDE_FAIL; + } + break; + } + case LUBDE_CPU_PCI_REGISTER: + { + if (lkbde_cpu_pci_register(io.dev) == -1) { + io.rc = LUBDE_FAIL; + } + break; + } +#endif + case LUBDE_DEV_RESOURCE: + if (!VALID_DEVICE(io.dev)) { + return -EINVAL; + } + bde_dev = user_bde->get_dev(io.dev); + if (bde_dev) { + if (BDE_DEV_MEM_MAPPED(_devices[io.dev].dev_type)) { + /* Get physical address to map */ + io.rc = lkbde_get_dev_resource(io.dev, io.d0, + &io.d1, &io.d2, &io.d3); + } + } else { + io.rc = LUBDE_FAIL; + } + break; + case LUBDE_IPROC_READ_REG: + io.d1 = user_bde->iproc_read(io.dev, io.d0); + if (io.d1 == -1) { + io.rc = LUBDE_FAIL; + } + break; + case LUBDE_IPROC_WRITE_REG: + if (user_bde->iproc_write(io.dev, io.d0, io.d1) == -1) { + io.rc = LUBDE_FAIL; + } + break; + case LUBDE_ATTACH_INSTANCE: + io.rc = _instance_attach(io.d0, io.d1); + break; + case LUBDE_GET_DEVICE_STATE: + io.rc = lkbde_dev_state_get(io.dev, &io.d0); + break; + default: + gprintk("Error: Invalid ioctl (%08x)\n", cmd); + io.rc = LUBDE_FAIL; + break; + } + + if (copy_to_user((void *)arg, &io, sizeof(io))) { + return -EFAULT; + } + + return 0; +} + +/* Workaround for broken Busybox/PPC insmod */ +static char _modname[] = LINUX_USER_BDE_NAME; + +static gmodule_t _gmodule = +{ + name: LINUX_USER_BDE_NAME, + major: LINUX_USER_BDE_MAJOR, + init: _init, + cleanup: _cleanup, + pprint: _pprint, + ioctl: _ioctl, +}; + +gmodule_t* +gmodule_get(void) +{ + _gmodule.name = _modname; + return &_gmodule; +} diff --git a/platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/linux-user-bde.h b/platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/linux-user-bde.h new file mode 100644 index 000000000000..edf5f63bf54a --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/linux/user/kernel/linux-user-bde.h @@ -0,0 +1,113 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: linux-user-bde.h,v 1.23 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +#ifndef __LINUX_USER_BDE_H__ +#define __LINUX_USER_BDE_H__ + +#include +#include +#include +#ifndef __KERNEL__ +#include +#endif + +#if defined(SAL_BDE_32BIT_USER_64BIT_KERNEL) || defined(PTRS_ARE_64BITS) +typedef uint64_t bde_kernel_addr_t; +#else +typedef uint32_t bde_kernel_addr_t; +#endif + +/* Ioctl control structure */ +typedef struct { + unsigned int dev; /* Device ID */ + unsigned int rc; /* Operation Return Code */ + unsigned int d0; /* Operation specific data */ + unsigned int d1; + unsigned int d2; + unsigned int d3; + bde_kernel_addr_t p0; + union { + unsigned int dw[2]; + unsigned char buf[64]; + } dx; +} lubde_ioctl_t; + + +/* LUBDE ioctls */ +#define LUBDE_MAGIC 'L' + +#define LUBDE_VERSION _IO(LUBDE_MAGIC, 0) +#define LUBDE_GET_NUM_DEVICES _IO(LUBDE_MAGIC, 1) +#define LUBDE_GET_DEVICE _IO(LUBDE_MAGIC, 2) +#define LUBDE_PCI_CONFIG_PUT32 _IO(LUBDE_MAGIC, 3) +#define LUBDE_PCI_CONFIG_GET32 _IO(LUBDE_MAGIC, 4) +#define LUBDE_GET_DMA_INFO _IO(LUBDE_MAGIC, 5) +#define LUBDE_ENABLE_INTERRUPTS _IO(LUBDE_MAGIC, 6) +#define LUBDE_DISABLE_INTERRUPTS _IO(LUBDE_MAGIC, 7) +#define LUBDE_USLEEP _IO(LUBDE_MAGIC, 8) +#define LUBDE_WAIT_FOR_INTERRUPT _IO(LUBDE_MAGIC, 9) +#define LUBDE_SEM_OP _IO(LUBDE_MAGIC, 10) +#define LUBDE_UDELAY _IO(LUBDE_MAGIC, 11) +#define LUBDE_GET_DEVICE_TYPE _IO(LUBDE_MAGIC, 12) +#define LUBDE_SPI_READ_REG _IO(LUBDE_MAGIC, 13) +#define LUBDE_SPI_WRITE_REG _IO(LUBDE_MAGIC, 14) +#define LUBDE_READ_REG_16BIT_BUS _IO(LUBDE_MAGIC, 19) +#define LUBDE_WRITE_REG_16BIT_BUS _IO(LUBDE_MAGIC, 20) +#define LUBDE_GET_BUS_FEATURES _IO(LUBDE_MAGIC, 21) +#define LUBDE_WRITE_IRQ_MASK _IO(LUBDE_MAGIC, 22) +#define LUBDE_CPU_WRITE_REG _IO(LUBDE_MAGIC, 23) +#define LUBDE_CPU_READ_REG _IO(LUBDE_MAGIC, 24) +#define LUBDE_CPU_PCI_REGISTER _IO(LUBDE_MAGIC, 25) +#define LUBDE_DEV_RESOURCE _IO(LUBDE_MAGIC, 26) +#define LUBDE_IPROC_READ_REG _IO(LUBDE_MAGIC, 27) +#define LUBDE_IPROC_WRITE_REG _IO(LUBDE_MAGIC, 28) +#define LUBDE_ATTACH_INSTANCE _IO(LUBDE_MAGIC, 29) +#define LUBDE_GET_DEVICE_STATE _IO(LUBDE_MAGIC, 30) + +#define LUBDE_SEM_OP_CREATE 1 +#define LUBDE_SEM_OP_DESTROY 2 +#define LUBDE_SEM_OP_TAKE 3 +#define LUBDE_SEM_OP_GIVE 4 + +#define LUBDE_SUCCESS 0 +#define LUBDE_FAIL ((unsigned int)-1) + + +/* + * Version history + * 1:add LUBDE_GET_DEVICE_STATE to support PCI hot plug + */ +#define KBDE_VERSION 1 + + +/* This is the signal that will be used + * when an interrupt occurs + */ + +#ifndef __KERNEL__ +#include +#endif + +#define LUBDE_INTERRUPT_SIGNAL SIGUSR1 +#define LUBDE_ETHER_INTERRUPT_SIGNAL SIGUSR2 + +#endif /* __LUBDE_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde.h b/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde.h new file mode 100644 index 000000000000..0a9df3a6e419 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde.h @@ -0,0 +1,77 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: $ + * $Copyright: (c) 2014 Broadcom Corp. + * All Rights Reserved.$ + * + */ + +#ifndef __SHBDE_H__ +#define __SHBDE_H__ + +typedef void (*shbde_log_func_t)(int level, const char *str, int param); + +#define SHBDE_ERR 0 +#define SHBDE_WARN 1 +#define SHBDE_DBG 2 + +/* iProc configuration (primarily used for PCI-AXI bridge) */ +typedef struct shbde_iproc_config_s { + unsigned int dev_id; + unsigned int dev_rev; + unsigned int use_msi; + unsigned int iproc_ver; + unsigned int cmic_ver; + unsigned int cmic_rev; + unsigned int dma_hi_bits; + unsigned int mdio_base_addr; + unsigned int pcie_phy_addr; + unsigned int adjust_pcie_preemphasis; +} shbde_iproc_config_t; + +/* Hardware abstraction functions */ +typedef struct shbde_hal_s { + + /* Optional log output interface */ + shbde_log_func_t log_func; + + /* PCI configuration access */ + unsigned char (*pcic8_read)(void *pci_dev, unsigned int reg); + void (*pcic8_write)(void *pci_dev, unsigned int reg, unsigned char data); + unsigned short (*pcic16_read)(void *pci_dev, unsigned int reg); + void (*pcic16_write)(void *pci_dev, unsigned int reg, unsigned short data); + unsigned int (*pcic32_read)(void *pci_dev, unsigned int reg); + void (*pcic32_write)(void *pci_dev, unsigned int reg, unsigned int data); + + /* iProc register access */ + unsigned int (*io32_read)(void *addr); + void (*io32_write)(void *addr, unsigned int); + + /* usleep function (optional) */ + void (*usleep)(int usec); + + /* PCI parent device access */ + void *(*pci_parent_device_get)(void *pci_dev); + + /* iProc configuration */ + shbde_iproc_config_t icfg; + +} shbde_hal_t; + + +#endif /* __SHBDE_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_iproc.h b/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_iproc.h new file mode 100644 index 000000000000..4841a3167d89 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_iproc.h @@ -0,0 +1,49 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: $ + * $Copyright: (c) 2014 Broadcom Corp. + * All Rights Reserved.$ + * + */ + +#ifndef __SHBDE_IPROC_H__ +#define __SHBDE_IPROC_H__ + +#include + +extern int +shbde_iproc_config_init(shbde_iproc_config_t *icfg, + unsigned int dev_id, unsigned int dev_rev); + +extern int +shbde_iproc_paxb_init(shbde_hal_t *shbde, void *iproc_regs, + shbde_iproc_config_t *icfg); + +extern unsigned int +shbde_iproc_pci_read(shbde_hal_t *shbde, void *iproc_regs, + unsigned int addr); + +extern void +shbde_iproc_pci_write(shbde_hal_t *shbde, void *iproc_regs, + unsigned int addr, unsigned int data); + +extern int +shbde_iproc_pcie_preemphasis_set(shbde_hal_t *shbde, void *iproc_regs, + shbde_iproc_config_t *icfg, void *pci_dev); + +#endif /* __SHBDE_IPROC_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_mdio.h b/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_mdio.h new file mode 100644 index 000000000000..b5a2f8b3f31d --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_mdio.h @@ -0,0 +1,60 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: $ + * $Copyright: (c) 2015 Broadcom Corp. + * All Rights Reserved.$ + * + */ + +#ifndef __SHBDE_MDIO_H__ +#define __SHBDE_MDIO_H__ + +#include + +typedef struct shbde_mdio_ctrl_s { + + /* Primary HAL*/ + shbde_hal_t *shbde; + + /* Context for iProc MDIO register access */ + void *regs; + + /* Base address for MDIO registers */ + unsigned int base_addr; + + /* iProc MDIO register access */ + unsigned int (*io32_read)(shbde_hal_t *shbde, void *iproc_regs, + unsigned int addr); + void (*io32_write)(shbde_hal_t *shbde, void *iproc_regs, + unsigned int addr, unsigned int data); + +} shbde_mdio_ctrl_t; + + +extern int +shbde_iproc_mdio_init(shbde_mdio_ctrl_t *smc); + +extern int +shbde_iproc_mdio_read(shbde_mdio_ctrl_t *smc, unsigned int phy_addr, + unsigned int reg, unsigned int *val); + +extern int +shbde_iproc_mdio_write(shbde_mdio_ctrl_t *smc, unsigned int phy_addr, + unsigned int reg, unsigned int val); + +#endif /* __SHBDE_MDIO_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_pci.h b/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_pci.h new file mode 100644 index 000000000000..06aadfae5b31 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/shared/include/shbde_pci.h @@ -0,0 +1,47 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: $ + * $Copyright: (c) 2014 Broadcom Corp. + * All Rights Reserved.$ + * + */ + +#ifndef __SHBDE_PCI_H__ +#define __SHBDE_PCI_H__ + +#include + +extern unsigned int +shbde_pci_pcie_cap(shbde_hal_t *shbde, void *pci_dev); + +extern int +shbde_pci_is_pcie(shbde_hal_t *shbde, void *pci_dev); + +extern int +shbde_pci_is_iproc(shbde_hal_t *shbde, void *pci_dev, int *cmic_bar); + +extern int +shbde_pci_max_payload_set(shbde_hal_t *shbde, void *pci_dev, int maxpayload); + +extern int +shbde_pci_iproc_version_get(shbde_hal_t *shbde, void *pci_dev, + unsigned int *iproc_ver, + unsigned int *cmic_ver, + unsigned int *cmic_rev); + +#endif /* __SHBDE_PCI_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/bde/shared/shbde_iproc.c b/platform/broadcom/saibcm-modules/systems/bde/shared/shbde_iproc.c new file mode 100644 index 000000000000..2db25df585ae --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/shared/shbde_iproc.c @@ -0,0 +1,466 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: $ + * $Copyright: (c) 2014 Broadcom Corp. + * All Rights Reserved.$ + * + */ + +#include +#include +#include + +/* PAXB register offsets within PCI BAR0 window */ +#define BAR0_PAXB_ENDIANESS 0x2030 +#define BAR0_PAXB_PCIE_EP_AXI_CONFIG 0x2104 +#define BAR0_PAXB_CONFIG_IND_ADDR 0x2120 +#define BAR0_PAXB_CONFIG_IND_DATA 0x2124 + +#define BAR0_PAXB_IMAP0_0 (0x2c00) +#define BAR0_PAXB_IMAP0_1 (0x2c04) +#define BAR0_PAXB_IMAP0_2 (0x2c08) +#define BAR0_PAXB_IMAP0_7 (0x2c1c) + +#define BAR0_PAXB_OARR_FUNC0_MSI_PAGE 0x2d34 +#define BAR0_PAXB_OARR_2 0x2d60 +#define BAR0_PAXB_OARR_2_UPPER 0x2d64 +#define BAR0_DMU_PCU_PCIE_SLAVE_RESET_MODE 0x7024 + +/* Force byte pointer for offset adjustments */ +#define ROFFS(_ptr, _offset) ((unsigned char*)(_ptr) + (_offset)) + +#define PAXB_CONFIG_IND_ADDRr_PROTOCOL_LAYERf_SHFT 11 +#define PAXB_CONFIG_IND_ADDRr_PROTOCOL_LAYERf_MASK 0x3 +#define PAXB_CONFIG_IND_ADDRr_ADDRESSf_SHFT 0 +#define PAXB_CONFIG_IND_ADDRr_ADDRESSf_MASK 0x7ff + +/* Register value set/get by field */ +#define REG_FIELD_SET(_r, _f, _r_val, _f_val) \ + _r_val = ((_r_val) & ~(_r##_##_f##_MASK << _r##_##_f##_SHFT)) | \ + (((_f_val) & _r##_##_f##_MASK) << _r##_##_f##_SHFT) +#define REG_FIELD_GET(_r, _f, _r_val) \ + (((_r_val) >> _r##_##_f##_SHFT) & _r##_##_f##_MASK) + +/* PCIe capabilities definition */ +#ifndef PCI_EXP_LNKSTA +#define PCI_EXP_LNKSTA 0x12 +#endif +/* Current Link Speed 5.0GT/s */ +#ifndef PCI_EXP_LNKSTA_CLS_5_0GB +#define PCI_EXP_LNKSTA_CLS_5_0GB 2 +#endif +#ifndef PCI_EXP_LNKSTA2 +#define PCI_EXP_LNKSTA2 0x32 +#endif +/* Current Deemphasis Level -3.5 dB */ +#ifndef PCI_EXP_LNKSTA2_CDL_3_5DB +#define PCI_EXP_LNKSTA2_CDL_3_5DB 0x1 +#endif + +static unsigned int +iproc32_read(shbde_hal_t *shbde, void *addr) +{ + if (!shbde || !shbde->io32_read) { + return 0; + } + return shbde->io32_read(addr); +} + +static void +iproc32_write(shbde_hal_t *shbde, void *addr, unsigned int data) +{ + if (!shbde || !shbde->io32_write) { + return; + } + shbde->io32_write(addr, data); +} + +static void +wait_usec(shbde_hal_t *shbde, int usec) +{ + if (shbde && shbde->usleep) { + shbde->usleep(usec); + } else { + int idx; + volatile int count; + for (idx = 0; idx < usec; idx++) { + for (count = 0; count < 100; count++); + } + } +} + +/* + * Function: + * shbde_iproc_config_init + * Purpose: + * Initialize iProc configuration parameters + * Parameters: + * icfg - pointer to empty iProc configuration structure + * Returns: + * -1 if error, otherwise 0 + */ +int +shbde_iproc_config_init(shbde_iproc_config_t *icfg, + unsigned int dev_id, unsigned int dev_rev) +{ + if (!icfg) { + return -1; + } + + /* Save device ID and revision */ + icfg->dev_id = dev_id; + icfg->dev_rev = dev_rev; + + /* Check device families first */ + switch (icfg->dev_id & 0xfff0) { + case 0x8400: /* Greyhound Lite */ + case 0x8410: /* Greyhound */ + case 0x8420: /* Bloodhound */ + case 0x8450: /* Elkhound */ + case 0xb060: /* Ranger2(Greyhound) */ + case 0x8360: /* Greyhound 53365 & 53369 */ + case 0xb260: /* saber2 */ + case 0xb460: /* saber2+ */ + case 0xb170: /* Hurricane3-MG */ + case 0x8570: /* Greyhound2 */ + case 0xb070: /* Greyhound2(emulation) */ + case 0x8580: /* Greyhound2(emulation) */ + case 0xb230: /* Dagger2 */ + icfg->iproc_ver = 7; + icfg->dma_hi_bits = 0x2; + break; + case 0xb560: /* Apache */ + case 0xb760: /* Maverick */ + icfg->iproc_ver = 0xB; + break; + case 0xb160: /* Hurricane3 */ + case 0x8440: /* Wolfhound2 */ + case 0x8430: /* Foxhound2 */ + icfg->iproc_ver = 10; + icfg->dma_hi_bits = 0x2; + break; + default: + break; + } + + /* Check for exceptions */ + switch (icfg->dev_id) { + case 0xb069: + case 0xb068: + icfg->iproc_ver = 0xB; /*Ranger2+ Apache Family */ + icfg->dma_hi_bits = 0; + break; + case 0xb168: /* Ranger3+ */ + case 0xb169: + icfg->iproc_ver = 0; + icfg->dma_hi_bits = 0; + break; + default: + break; + } + /* Check for PCIe PHY address that needs PCIe preemphasis and + * assign the MDIO base address + */ + switch (icfg->dev_id & 0xfff0) { + case 0xb150: /* Hurricane2 */ + case 0x8340: /* Wolfhound */ + case 0x8330: /* Foxhound */ + case 0x8390: /* Dearhound */ + icfg->mdio_base_addr = 0x18032000; + icfg->pcie_phy_addr = 0x2; + break; + case 0xb340: /* Helilx4 */ + case 0xb540: /* FireScout */ + case 0xb040: /* Spiral, Ranger */ + icfg->mdio_base_addr = 0x18032000; + icfg->pcie_phy_addr = 0x5; + icfg->adjust_pcie_preemphasis = 1; + break; + case 0xa450: /* Katana2 */ + case 0xb240: + case 0xb450: + icfg->mdio_base_addr = 0x18032000; + icfg->pcie_phy_addr = 0x5; + icfg->adjust_pcie_preemphasis = 1; + break; + default: + break; + } + + /* Check for exceptions */ + switch (icfg->dev_id) { + default: + break; + } + + return 0; +} + +/* + * Function: + * shbde_iproc_paxb_init + * Purpose: + * Initialize iProc PCI-AXI bridge for CMIC access + * Parameters: + * shbde - pointer to initialized hardware abstraction module + * iproc_regs - memory mapped iProc registers in PCI BAR + * icfg - iProc configuration parameters + * Returns: + * -1 if error, otherwise 0 + */ +int +shbde_iproc_paxb_init(shbde_hal_t *shbde, void *iproc_regs, + shbde_iproc_config_t *icfg) +{ + void *reg; + unsigned int data; + int pci_num; + + if (!iproc_regs || !icfg) { + return -1; + } + + /* + * The following code attempts to auto-detect the correct + * iProc PCI endianess configuration by reading a well-known + * register (the endianess configuration register itself). + * Note that the PCI endianess may be different for different + * big endian host processors. + */ + reg = ROFFS(iproc_regs, BAR0_PAXB_ENDIANESS); + /* Select big endian */ + iproc32_write(shbde, reg, 0x01010101); + /* Check if endianess register itself is correct endian */ + if (iproc32_read(shbde, reg) != 1) { + /* If not, then assume little endian */ + iproc32_write(shbde, reg, 0x0); + } + + /* Select which PCI core to use */ + pci_num = 0; + reg = ROFFS(iproc_regs, BAR0_PAXB_IMAP0_2); + data = iproc32_read(shbde, reg); + if (data & 0x1000) { + /* PAXB_1 is mapped to sub-window 2 */ + pci_num = 1; + } + + /* Default DMA mapping if uninitialized */ + if (icfg->dma_hi_bits == 0) { + icfg->dma_hi_bits = 0x1; + if (pci_num == 1) { + icfg->dma_hi_bits = 0x2; + } + } + + /* Enable iProc DMA to external host memory */ + reg = ROFFS(iproc_regs, BAR0_PAXB_PCIE_EP_AXI_CONFIG); + iproc32_write(shbde, reg, 0x0); + if(icfg->cmic_ver < 4) { /* Non-CMICX */ + reg = ROFFS(iproc_regs, BAR0_PAXB_OARR_2); + iproc32_write(shbde, reg, 0x1); + reg = ROFFS(iproc_regs, BAR0_PAXB_OARR_2_UPPER); + iproc32_write(shbde, reg, icfg->dma_hi_bits); + + /* Configure MSI interrupt page */ + if (icfg->use_msi) { + reg = ROFFS(iproc_regs, BAR0_PAXB_OARR_FUNC0_MSI_PAGE); + data = iproc32_read(shbde, reg); + iproc32_write(shbde, reg, data | 0x1); + } + } + return pci_num; +} + +/* + * Function: + * shbde_iproc_pci_read + * Purpose: + * Read iProc register through PCI BAR 0 + * Parameters: + * shbde - pointer to initialized hardware abstraction module + * iproc_regs - memory mapped iProc registers in PCI BAR + * addr - iProc register address in AXI memory space + * Returns: + * Register value + */ +unsigned int +shbde_iproc_pci_read(shbde_hal_t *shbde, void *iproc_regs, + unsigned int addr) +{ + unsigned int subwin_base; + void *reg; + shbde_iproc_config_t *icfg = &shbde->icfg; + + if (!iproc_regs) { + return -1; + } + + /* Sub-window size is 0x1000 (4K) */ + subwin_base = (addr & ~0xfff); + + if((icfg->cmic_ver >= 4) && (subwin_base == 0x18013000)) { + /* Route the INTC block access through IMAP0_6 */ + reg = ROFFS(iproc_regs, 0x6000 + (addr & 0xfff)); + } else { + /* Update base address for sub-window 7 */ + subwin_base |= 1; /* Valid bit */ + reg = ROFFS(iproc_regs, BAR0_PAXB_IMAP0_7); + iproc32_write(shbde, reg, subwin_base); + /* Read it to make sure the write actually goes through */ + subwin_base = iproc32_read(shbde, reg); + + /* Read register through sub-window 7 */ + reg = ROFFS(iproc_regs, 0x7000 + (addr & 0xfff)); + } + + return iproc32_read(shbde, reg); +} + +/* + * Function: + * shbde_iproc_pci_write + * Purpose: + * Write iProc register through PCI BAR 0 + * Parameters: + * shbde - pointer to initialized hardware abstraction module + * iproc_regs - memory mapped iProc registers in PCI BAR + * addr - iProc register address in AXI memory space + * data - data to write to iProc register + * Returns: + * Register value + */ +void +shbde_iproc_pci_write(shbde_hal_t *shbde, void *iproc_regs, + unsigned int addr, unsigned int data) +{ + unsigned int subwin_base; + void *reg; + shbde_iproc_config_t *icfg = &shbde->icfg; + + if (!iproc_regs) { + return; + } + + /* Sub-window size is 0x1000 (4K) */ + subwin_base = (addr & ~0xfff); + + if((icfg->cmic_ver >= 4) && (subwin_base == 0x18013000)) { + /* Route the INTC block access through IMAP0_6 */ + reg = ROFFS(iproc_regs, 0x6000 + (addr & 0xfff)); + } else { + /* Update base address for sub-window 7 */ + subwin_base |= 1; /* Valid bit */ + reg = ROFFS(iproc_regs, BAR0_PAXB_IMAP0_7); + iproc32_write(shbde, reg, subwin_base); + /* Read it to make sure the write actually goes through */ + subwin_base = iproc32_read(shbde, reg); + + /* Read register through sub-window 7 */ + reg = ROFFS(iproc_regs, 0x7000 + (addr & 0xfff)); + } + + iproc32_write(shbde, reg, data); +} + +int +shbde_iproc_pcie_preemphasis_set(shbde_hal_t *shbde, void *iproc_regs, + shbde_iproc_config_t *icfg, void *pci_dev) +{ + shbde_mdio_ctrl_t mdio_ctrl, *smc = &mdio_ctrl; + unsigned int phy_addr, data; + void *reg; + unsigned int pcie_cap_base; + unsigned short link_stat, link_stat2; + + if (!icfg) { + return -1; + } + + /* PHY address for PCIe link */ + phy_addr = icfg->pcie_phy_addr; + if (phy_addr == 0 || icfg->mdio_base_addr == 0) { + return 0; + } + + /* Initialize MDIO control */ + smc->shbde = shbde; + smc->regs = iproc_regs; + smc->base_addr = icfg->mdio_base_addr; + smc->io32_read = shbde_iproc_pci_read; + smc->io32_write = shbde_iproc_pci_write; + shbde_iproc_mdio_init(smc); + + /* PCIe SerDes Gen1/Gen2 CDR Track Bandwidth Adjustment + * for Better Jitter Tolerance + */ + shbde_iproc_mdio_write(smc, phy_addr, 0x1f, 0x8630); + shbde_iproc_mdio_write(smc, phy_addr, 0x13, 0x190); + shbde_iproc_mdio_write(smc, phy_addr, 0x19, 0x191); + + if (!icfg->adjust_pcie_preemphasis) { + return 0; + } + + /* Check to see if the PCIe SerDes deemphasis needs to be changed + * based on the advertisement from the root complex + */ + /* Find PCIe capability base */ + if (!shbde || !shbde->pcic16_read || !pci_dev) { + return -1; + } + pcie_cap_base = shbde_pci_pcie_cap(shbde, pci_dev); + if (pcie_cap_base) { + link_stat = shbde->pcic16_read(pci_dev, + pcie_cap_base + PCI_EXP_LNKSTA); + link_stat2 = shbde->pcic16_read(pci_dev, + pcie_cap_base + PCI_EXP_LNKSTA2); + if (((link_stat & 0xf) == PCI_EXP_LNKSTA_CLS_5_0GB) && + (link_stat2 & PCI_EXP_LNKSTA2_CDL_3_5DB)) { + /* Device is operating at Gen2 speeds and RC requested -3.5dB */ + /* Change the transmitter setting */ + shbde_iproc_mdio_write(smc, phy_addr, 0x1f, 0x8610); + shbde_iproc_mdio_read(smc, phy_addr, 0x17, &data); + data &= ~0xf00; + data |= 0x700; + shbde_iproc_mdio_write(smc, phy_addr, 0x17, data); + + /* Force the PCIe link to retrain */ + data = 0; + REG_FIELD_SET(PAXB_CONFIG_IND_ADDRr, PROTOCOL_LAYERf, data, 0x2); + REG_FIELD_SET(PAXB_CONFIG_IND_ADDRr, ADDRESSf, data, 0x4); + reg = ROFFS(iproc_regs, BAR0_PAXB_CONFIG_IND_ADDR); + iproc32_write(shbde, reg, data); + + reg = ROFFS(iproc_regs, BAR0_PAXB_CONFIG_IND_DATA); + data = iproc32_read(shbde, reg); + data &= ~0x4000; + iproc32_write(shbde, reg, data); + data |= 0x4000; + iproc32_write(shbde, reg, data); + data &= ~0x4000; + iproc32_write(shbde, reg, data); + + /* Wait a short while for the retraining to complete */ + wait_usec(shbde, 1000); + } + } + + return 0; +} + diff --git a/platform/broadcom/saibcm-modules/systems/bde/shared/shbde_mdio.c b/platform/broadcom/saibcm-modules/systems/bde/shared/shbde_mdio.c new file mode 100644 index 000000000000..434312d5608c --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/shared/shbde_mdio.c @@ -0,0 +1,187 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: $ + * $Copyright: (c) 2015 Broadcom Corp. + * All Rights Reserved.$ + * + */ + +#include + +/* iProc MDIO register offset */ +#define MII_MGMT_CTRL 0x0 +#define MII_MGMT_CMD_DATA 0x4 + +/* iProc MII register with fields definition */ +#define MII_MGMT_CTRLr_MDCDIVf_SHFT 0 +#define MII_MGMT_CTRLr_MDCDIVf_MASK 0x7f +#define MII_MGMT_CTRLr_BSYf_SHFT 8 +#define MII_MGMT_CTRLr_BSYf_MASK 0x1 + +#define MII_MGMT_CMD_DATAr_DATAf_SHFT 0 +#define MII_MGMT_CMD_DATAr_DATAf_MASK 0xffff +#define MII_MGMT_CMD_DATAr_TAf_SHFT 16 +#define MII_MGMT_CMD_DATAr_TAf_MASK 0x3 +#define MII_MGMT_CMD_DATAr_RAf_SHFT 18 +#define MII_MGMT_CMD_DATAr_RAf_MASK 0x1f +#define MII_MGMT_CMD_DATAr_PAf_SHFT 23 +#define MII_MGMT_CMD_DATAr_PAf_MASK 0x1f +#define MII_MGMT_CMD_DATAr_OPf_SHFT 28 +#define MII_MGMT_CMD_DATAr_OPf_MASK 0x3 +#define MII_MGMT_CMD_DATAr_SBf_SHFT 30 +#define MII_MGMT_CMD_DATAr_SBf_MASK 0x3 + +/* Register field value set/get */ +#define REG_FIELD_SET(_r, _f, _r_val, _f_val) \ + _r_val = ((_r_val) & ~(_r##_##_f##_MASK << _r##_##_f##_SHFT)) | \ + (((_f_val) & _r##_##_f##_MASK) << _r##_##_f##_SHFT) +#define REG_FIELD_GET(_r, _f, _r_val) \ + (((_r_val) >> _r##_##_f##_SHFT) & _r##_##_f##_MASK) + +#define LOG_OUT(_shbde, _lvl, _str, _prm) \ + if ((_shbde)->log_func) { \ + (_shbde)->log_func(_lvl, _str, _prm); \ + } +#define LOG_ERR(_shbde, _str, _prm) LOG_OUT(_shbde, SHBDE_ERR, _str, _prm) +#define LOG_WARN(_shbde, _str, _prm) LOG_OUT(_shbde, SHBDE_WARN, _str, _prm) +#define LOG_DBG(_shbde, _str, _prm) LOG_OUT(_shbde, SHBDE_DBG, _str, _prm) + +static unsigned int +mdio32_read(shbde_mdio_ctrl_t *smc, unsigned int offset) +{ + if (!smc || !smc->io32_read) { + return 0; + } + return smc->io32_read(smc->shbde, smc->regs, smc->base_addr + offset); +} + +static void +mdio32_write(shbde_mdio_ctrl_t *smc, unsigned int offset, unsigned int data) +{ + if (!smc || !smc->io32_read) { + return; + } + smc->io32_write(smc->shbde, smc->regs, smc->base_addr + offset, data); +} + +static void +wait_usec(shbde_mdio_ctrl_t *smc, int usec) +{ + shbde_hal_t *shbde = smc->shbde; + + if (shbde && shbde->usleep) { + shbde->usleep(usec); + } else { + int idx; + volatile int count; + for (idx = 0; idx < usec; idx++) { + for (count = 0; count < 100; count++); + } + } +} + +static int +iproc_mdio_wait_for_busy(shbde_mdio_ctrl_t *smc) +{ + int mii_busy; + unsigned int reg_val; + int count = 1000; + + /* Wait until MII is not busy */ + do { + reg_val = mdio32_read(smc, MII_MGMT_CTRL); + mii_busy = REG_FIELD_GET(MII_MGMT_CTRLr, BSYf, reg_val); + if (!mii_busy) { + break; + } + wait_usec(smc, 10); + count --; + } while (count > 0); + + return mii_busy; +} + +int +shbde_iproc_mdio_init(shbde_mdio_ctrl_t *smc) +{ + shbde_hal_t *shbde = smc->shbde; + unsigned int reg_val = 0; + + /* Enable the iProc internal MDIO interface */ + REG_FIELD_SET(MII_MGMT_CTRLr, MDCDIVf, reg_val, 0x7f); + mdio32_write(smc, MII_MGMT_CTRL, reg_val); + + if (shbde && !shbde->usleep) { + LOG_DBG(shbde, "shbde_mdio: no registration of usleep vector", 0); + } + + wait_usec(smc, 100); + + return 0; +} + +int +shbde_iproc_mdio_read(shbde_mdio_ctrl_t *smc, unsigned int phy_addr, + unsigned int reg, unsigned int *val) +{ + unsigned int reg_val = 0; + + REG_FIELD_SET(MII_MGMT_CMD_DATAr, SBf, reg_val, 0x1); + REG_FIELD_SET(MII_MGMT_CMD_DATAr, TAf, reg_val, 0x2); + REG_FIELD_SET(MII_MGMT_CMD_DATAr, OPf, reg_val, 0x2); + REG_FIELD_SET(MII_MGMT_CMD_DATAr, PAf, reg_val, phy_addr); + REG_FIELD_SET(MII_MGMT_CMD_DATAr, RAf, reg_val, reg); + mdio32_write(smc, MII_MGMT_CMD_DATA, reg_val); + + if (iproc_mdio_wait_for_busy(smc)) { + *val = 0; + LOG_DBG(smc->shbde, "shbde_iproc_mdio_read busy", reg); + return -1; + } + + reg_val = mdio32_read(smc, MII_MGMT_CMD_DATA); + *val = REG_FIELD_GET(MII_MGMT_CMD_DATAr, DATAf, reg_val); + + return 0; +} + +int +shbde_iproc_mdio_write(shbde_mdio_ctrl_t *smc, unsigned int phy_addr, + unsigned int reg, unsigned int val) +{ + unsigned int reg_val = 0; + + REG_FIELD_SET(MII_MGMT_CMD_DATAr, SBf, reg_val, 0x1); + REG_FIELD_SET(MII_MGMT_CMD_DATAr, TAf, reg_val, 0x2); + REG_FIELD_SET(MII_MGMT_CMD_DATAr, OPf, reg_val, 0x1); + REG_FIELD_SET(MII_MGMT_CMD_DATAr, PAf, reg_val, phy_addr); + REG_FIELD_SET(MII_MGMT_CMD_DATAr, RAf, reg_val, reg); + REG_FIELD_SET(MII_MGMT_CMD_DATAr, DATAf, reg_val, val); + mdio32_write(smc, MII_MGMT_CMD_DATA, reg_val); + + if (iproc_mdio_wait_for_busy(smc)) { + LOG_DBG(smc->shbde, "shbde_iproc_mdio_write busy", reg); + return -1; + } + + /* Wait for some time for the write to take effect */ + wait_usec(smc, 100); + + return 0; +} + diff --git a/platform/broadcom/saibcm-modules/systems/bde/shared/shbde_pci.c b/platform/broadcom/saibcm-modules/systems/bde/shared/shbde_pci.c new file mode 100644 index 000000000000..22408a84c3e6 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/bde/shared/shbde_pci.c @@ -0,0 +1,393 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: $ + * $Copyright: (c) 2014 Broadcom Corp. + * All Rights Reserved.$ + * + */ + +#include + +/* PCIe capabilities */ +#ifndef PCI_CAPABILITY_LIST +#define PCI_CAPABILITY_LIST 0x34 +#endif +#ifndef PCI_CAP_ID_EXP +#define PCI_CAP_ID_EXP 0x10 +#endif +#ifndef PCI_EXP_DEVCAP +#define PCI_EXP_DEVCAP 4 +#endif +#ifndef PCI_EXP_DEVCTL +#define PCI_EXP_DEVCTL 8 +#endif +#ifndef PCI_EXT_CAP_START +#define PCI_EXT_CAP_START 0x100 +#endif +#ifndef PCI_EXT_CAP_ID +#define PCI_EXT_CAP_ID(_hdr) (_hdr & 0x0000ffff) +#endif +#ifndef PCI_EXT_CAP_VER +#define PCI_EXT_CAP_VER(_hdr) ((_hdr >> 16) & 0xf) +#endif +#ifndef PCI_EXT_CAP_NEXT +#define PCI_EXT_CAP_NEXT(_hdr) ((_hdr >> 20) & 0xffc) +#endif +#ifndef PCI_EXT_CAP_ID_VNDR +#define PCI_EXT_CAP_ID_VNDR 0x0b +#endif + +#define LOG_OUT(_shbde, _lvl, _str, _prm) \ + if ((_shbde)->log_func) { \ + (_shbde)->log_func(_lvl, _str, _prm); \ + } +#define LOG_ERR(_shbde, _str, _prm) LOG_OUT(_shbde, SHBDE_ERR, _str, _prm) +#define LOG_WARN(_shbde, _str, _prm) LOG_OUT(_shbde, SHBDE_WARN, _str, _prm) +#define LOG_DBG(_shbde, _str, _prm) LOG_OUT(_shbde, SHBDE_DBG, _str, _prm) + +#ifndef NULL +#define NULL (void *)0 +#endif + +/* + * Warpper functions with null-pointer checks. + */ +static unsigned int +pcic16_read(shbde_hal_t *shbde, void *pci_dev, + unsigned int addr) +{ + if (!shbde || !shbde->pcic16_read) { + return 0; + } + return shbde->pcic16_read(pci_dev, addr); +} + +static void +pcic16_write(shbde_hal_t *shbde, void *pci_dev, + unsigned int addr, unsigned int data) +{ + if (!shbde || !shbde->pcic16_write) { + return; + } + shbde->pcic16_write(pci_dev, addr, data); +} + +static unsigned int +pcic32_read(shbde_hal_t *shbde, void *pci_dev, + unsigned int addr) +{ + if (!shbde || !shbde->pcic32_read) { + return 0; + } + return shbde->pcic32_read(pci_dev, addr); +} + +static void * +pci_parent_device_get(shbde_hal_t *shbde, void *pci_dev) +{ + if (!shbde || !shbde->pci_parent_device_get) { + return NULL; + } + return shbde->pci_parent_device_get(pci_dev); +} + +/* + * Function: + * shbde_pci_pcie_cap + * Purpose: + * Return offset of PCIe capabilities in PCI configuration space + * Parameters: + * shbde - pointer to initialized hardware abstraction module + * dev - PCI device handle (passed back to PCI HAL functions) + * Returns: + * PCI_CAP_ID_EXP offset in PCI configuration space if PCIe, otherwise 0 + */ +unsigned int +shbde_pci_pcie_cap(shbde_hal_t *shbde, void *pci_dev) +{ + unsigned int cap_base, rval; + + cap_base = pcic16_read(shbde, pci_dev, PCI_CAPABILITY_LIST); + while (cap_base) { + rval = pcic16_read(shbde, pci_dev, cap_base); + if ((rval & 0xff) == PCI_CAP_ID_EXP) { + break; + } + cap_base = (rval >> 8) & 0xff; + } + + return cap_base; +} + +/* + * Function: + * shbde_pci_is_pcie + * Purpose: + * Check if PCI device is PCIe device + * Parameters: + * shbde - pointer to initialized hardware abstraction module + * dev - PCI device handle (passed back to PCI HAL functions) + * Returns: + * 1 if PCIe, otherwise 0 + */ +int +shbde_pci_is_pcie(shbde_hal_t *shbde, void *pci_dev) +{ + return shbde_pci_pcie_cap(shbde, pci_dev) ? 1 : 0; +} + +/* + * Function: + * shbde_pci_is_iproc + * Purpose: + * Check if PCI device is iProc-based + * Parameters: + * shbde - pointer to initialized hardware abstraction module + * dev - PCI device handle (passed back to PCI HAL functions) + * cmic_bar - (OUT) PCI BAR which contains switch CMIC registers + * Returns: + * 1 if iProc-based, otherwise 0 + */ +int +shbde_pci_is_iproc(shbde_hal_t *shbde, void *pci_dev, int *cmic_bar) +{ + unsigned int cap_base, rval; + + if (!shbde_pci_is_pcie(shbde, pci_dev)) { + return 0; + } + + /* Look for PCIe vendor-specific extended capability (VSEC) */ + cap_base = PCI_EXT_CAP_START; + while (cap_base) { + rval = pcic32_read(shbde, pci_dev, cap_base); + if (rval == 0xffffffff) { + /* Assume PCI HW read error */ + return 0; + } + + if (PCI_EXT_CAP_ID(rval) == PCI_EXT_CAP_ID_VNDR) { + break; + } + cap_base = PCI_EXT_CAP_NEXT(rval); + } + if (cap_base) { + /* + * VSEC layout: + * + * 0x00: PCI Express Extended Capability Header + * 0x04: Vendor-Specific Header + * 0x08: Vendor-Specific Register 1 + * 0x0c: Vendor-Specific Register 2 + * ... + * 0x24: Vendor-Specific Register 8 + */ + /* 32'b // 31:12=0 Reserved; 11:08=CMIC BAR; 07:00=iProc Configuration ID */ + rval = pcic32_read(shbde, pci_dev, cap_base + 8); + LOG_DBG(shbde, "Found VSEC", rval); + + /* Determine PCI BAR of CMIC */ + *cmic_bar = 0; + if ((rval & 0x100) == 0x100) { + *cmic_bar = 2; + } + /* Assume iProc device */ + return 1; + } + + return 0; +} + +/* + * Function: + * shbde_pci_iproc_version_get + * Purpose: + * Get iproc, cmic versions and revisions + * Parameters: + * shbde - pointer to initialized hardware abstraction module + * dev - PCI device handle (passed back to PCI HAL functions) + * iproc_ver - (OUT) iProc version + * cmic_ver - (OUT) CMIC version + * cmic_rev - (OUT) CMIC revision + * Returns: + * 1 for no error, otherwise 0 + */ +int +shbde_pci_iproc_version_get(shbde_hal_t *shbde, void *pci_dev, + unsigned int *iproc_ver, + unsigned int *cmic_ver, + unsigned int *cmic_rev) +{ + unsigned int cap_base, rval; + + if (!shbde_pci_is_pcie(shbde, pci_dev)) { + return 0; + } + + /* Look for PCIe vendor-specific extended capability (VSEC) */ + cap_base = PCI_EXT_CAP_START; + while (cap_base) { + rval = pcic32_read(shbde, pci_dev, cap_base); + if (rval == 0xffffffff) { + /* Assume PCI HW read error */ + return 0; + } + + if (PCI_EXT_CAP_ID(rval) == PCI_EXT_CAP_ID_VNDR) { + break; + } + cap_base = PCI_EXT_CAP_NEXT(rval); + } + if (cap_base) { + /* + * VSEC layout: + * + * 0x00: PCI Express Extended Capability Header + * 0x04: Vendor-Specific Header + * 0x08: Vendor-Specific Register 1 + * 0x0c: Vendor-Specific Register 2 + * ... + * 0x24: Vendor-Specific Register 8 + */ + + /* Read PCIe Vendor Specific Register 1 */ + /* VENODR REG FORMAT + * [7:0] iProc Rev = 8'h0E (for P14) + * [11:8] CMIC BAR = 4'h1 (BAR64-1) + * [15:12] CMIC Version = 4'h4 + * [19:16] CMIC Rev = 4'h1 + * [22:20] SBUS Version = 4'h4 + */ + + rval = pcic32_read(shbde, pci_dev, cap_base + 8); + LOG_DBG(shbde, "Found VSEC", rval); + + /* Determine PCI BAR of CMIC */ + *iproc_ver = rval & 0xff; + *cmic_ver = (rval >> 12) & 0xf; + *cmic_rev = (rval >> 16) & 0xf; + return 1; + } + + return 0; +} + +/* + * Function: + * shbde_pci_max_payload_set + * Purpose: + * Set PCIe maximum payload + * Parameters: + * shbde - pointer to initialized hardware abstraction module + * dev - PCI device handle (passed back to PCI HAL functions) + * maxpayload - maximum payload (in byte) + * Returns: + * -1 if error, otherwise 0 + * Notes: + * If not PCIe device, set the PCI retry count to infinte instead. + */ +int +shbde_pci_max_payload_set(shbde_hal_t *shbde, void *pci_dev, int maxpayload) +{ + unsigned int cap_base, parent_cap_base; + unsigned int devcap, devctl, parent_devctl; + int max_val, max_cap, parent_max_val; + void *parent_pci_dev; + + cap_base = shbde_pci_pcie_cap(shbde, pci_dev); + + if (cap_base == 0) { + /* Not PCIe */ + return 0; + } + + /* Get current device control settings */ + devctl = pcic16_read(shbde, pci_dev, cap_base + PCI_EXP_DEVCTL); + + /* Get current max payload setting */ + max_val = (devctl >> 5) & 0x7; + + if (maxpayload) { + /* Get encoding from byte value */ + max_val = 0; + while ((1 << (max_val + 7)) < maxpayload) { + max_val++; + } + LOG_DBG(shbde, "Set max payload size", maxpayload); + LOG_DBG(shbde, "Set max payload val", max_val); + + /* Get max supported payload size */ + devcap = pcic16_read(shbde, pci_dev, cap_base + PCI_EXP_DEVCAP); + max_cap = (devcap & 0x7); + + /* Do not exceed device capabilities */ + if (max_val > max_cap) { + max_val = max_cap; + LOG_DBG(shbde, + "Payload size exceeds device capability", + maxpayload); + } + + /* Get currently set max payload size for the parent device + * in the PCI tree (if it exists). + */ + parent_pci_dev = pci_parent_device_get(shbde, pci_dev); + if (parent_pci_dev != NULL) { + parent_cap_base = shbde_pci_pcie_cap(shbde, parent_pci_dev); + parent_devctl = pcic16_read(shbde, + parent_pci_dev, + parent_cap_base + PCI_EXP_DEVCTL); + parent_max_val = (parent_devctl >> 5) & 0x7; + + /* Do not exceed current parent max payload setting (our device + * should have an MPS setting <= current parent MPS setting in + * the tree of PCIe devices). + */ + if (max_val > parent_max_val) { + max_val = parent_max_val; + LOG_DBG(shbde, + "Payload size exceeds current parent device setting", + maxpayload); + } + } + + /* Update max payload size */ + devctl &= ~(0x7 << 5); + devctl |= (max_val) << 5; + + /* Update max request size */ + devctl &= ~(0x7 << 12); + devctl |= (max_val << 12); + } + + /* Always disable relaxed ordering */ + devctl &= ~(1 << 4); + + /* Update device control settings */ + pcic16_write(shbde, pci_dev, cap_base + PCI_EXP_DEVCTL, devctl); + + /* Warn if non-default setting is used */ + if (max_val > 0) { + LOG_WARN(shbde, + "Selected payload size may not be supported by all " + "PCIe bridges by default.", + (1 << (max_val + 7))); + } + + return 0; +} diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/Makefile b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/Makefile new file mode 100644 index 000000000000..37f35b2e27a5 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/Makefile @@ -0,0 +1,32 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.10 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +# Makefile for SOC SAL support +# +LOCALDIR = systems/linux/kernel/modules + +include ${SDK}/make/Make.config + +subdirs=shared uk-proxy bcm-diag-full bcm-core bcm-net bcm-diag + +include ${SDK}/make/Make.subdirs + +include ${SDK}/make/Make.depend diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/bcm-knet/Makefile b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/bcm-knet/Makefile new file mode 100644 index 000000000000..5459b399aa4b --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/bcm-knet/Makefile @@ -0,0 +1,68 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.3 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +LOCALDIR = systems/linux/kernel/modules/bcm-knet + +include ${SDK}/make/Make.config + +LIBS = $(LIBDIR)/libkern.a + +ifeq ($(kernel_version),2_4) +MODULE = $(LIBDIR)/linux-bcm-knet.o +else +KERNEL_MODULE_DIR = kernel_module + +THIS_MOD_NAME := linux-bcm-knet +MODULE = $(LIBDIR)/$(THIS_MOD_NAME).o +KMODULE = $(LIBDIR)/$(THIS_MOD_NAME).ko + +build: $(MODULE) $(KMODULE) +endif + +KBUILD_EXTRA_SYMBOLS := ${BLDDIR}/../../../../bde/linux/kernel/kernel_module/Module.symvers +ifeq (,$(findstring -DPROXY_SUPPORT=0,$(CFLAGS))) +KBUILD_EXTRA_SYMBOLS += ${BLDDIR}/../uk-proxy/kernel_module/Module.symvers +endif + +# BCM Network Device + +$(MODULE): $(BLDDIR)/.tree $(BOBJS) $(LIBS) + $(LD) $(MODULE_LDFLAGS) -r -d $(BOBJS) $(LIBS) -o $@ +ifneq ($(kernel_version),2_4) +$(KMODULE): $(MODULE) + rm -fr $(BLDDIR)/$(KERNEL_MODULE_DIR) + mkdir $(BLDDIR)/$(KERNEL_MODULE_DIR) + cp ${SDK}/make/Makefile.linux-kmodule $(BLDDIR)/$(KERNEL_MODULE_DIR)/Makefile + cat ${KBUILD_EXTRA_SYMBOLS} > $(BLDDIR)/$(KERNEL_MODULE_DIR)/Module.symvers + MOD_NAME=$(THIS_MOD_NAME) $(MAKE) -C $(BLDDIR)/$(KERNEL_MODULE_DIR) $(THIS_MOD_NAME).ko +endif + +# Make.depend is before clean:: so that Make.depend's clean:: runs first. + +include ${SDK}/make/Make.depend + +clean:: + $(RM) $(BLDDIR)/version.c $(BLDDIR)/version.o + $(RM) $(BOBJS) $(MODULE) + +ifneq ($(kernel_version),2_4) +.PHONY: build +endif diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/bcm-knet/bcm-knet.c b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/bcm-knet/bcm-knet.c new file mode 100644 index 000000000000..fe6fd53850cc --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/bcm-knet/bcm-knet.c @@ -0,0 +1,6874 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: bcm-knet.c,v 1.90 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +/* + * This module implements a Linux network driver for Broadcom + * XGS switch devices. The driver simultaneously serves a + * number of vitual Linux network devices and a Tx/Rx API + * implemented in user space. + * + * Packets received from the switch device are sent to either + * a virtual Linux network device or the user mode Rx API + * based on a set of packet filters.susp + * + * Packets from the virtual Linux network devices and the user + * mode Tx API are multiplexed with priority given to the Tx API. + * + * A message-based IOCTL interface is used for managing packet + * filters and virtual Linux network interfaces. + * + * A virtual network interface can be configured to work in RCPU + * mode, which means that packets from the switch device will + * be encasulated with a RCPU header and a block of meta data + * that basically contains the core DCB information. Likewise, + * packets received from the Linux network stack are assumed to + * be RCPU encapsulated when going out on an interface in RCPU + * mode. + * + * The module implements basic Rx DMA rate control. The rate is + * specified in packets per second, and different Rx DMA channels + * can be configured to use different maximum packet rates. + * The packet rate can be configure as a module parameter, and + * it can also be changed dynamically through the proc file + * system (syntax is described in function header comment). + * + * To support multiple instance, each instance has its event queue. + * + * To support pci hot-plug in this module, the resource update + * should be handled when the PCI device is re-plugged. + * NOTE: the KNET detach should be invoked befere removing the + * device. + * + * For a list of supported module parameters, please see below. + */ + +#include /* Must be included first */ +#include +#include +#include + +#include +#include +#include +#include + + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("Network Device Driver for Broadcom BCM TxRx API"); +MODULE_LICENSE("GPL"); + +static int debug; +LKM_MOD_PARAM(debug, "i", int, 0); +MODULE_PARM_DESC(debug, +"Debug level (default 0)"); + +static char *mac_addr = NULL; +LKM_MOD_PARAM(mac_addr, "s", charp, 0); +MODULE_PARM_DESC(mac_addr, +"Ethernet MAC address (default 02:10:18:xx:xx:xx)"); + +static int rx_buffer_size = 9216; +LKM_MOD_PARAM(rx_buffer_size, "i", int, 0); +MODULE_PARM_DESC(rx_buffer_size, +"Size of RX packet buffers (default 9216)"); + +static int default_mtu = 1500; +LKM_MOD_PARAM(default_mtu, "i", int, 0); +MODULE_PARM_DESC(default_mtu, +"Default MTU for KNET network interfaces (default 1500)"); + +static int rx_sync_retry = 1000; +LKM_MOD_PARAM(rx_sync_retry, "i", int, 0); +MODULE_PARM_DESC(rx_sync_retry, +"Retries if chain is incomplete on interrupt (default 10)"); + +static char *base_dev_name = NULL; +LKM_MOD_PARAM(base_dev_name, "s", charp, 0); +MODULE_PARM_DESC(base_dev_name, +"Base device name (default bcm0, bcm1, etc.)"); + +static int rcpu_mode = 0; +LKM_MOD_PARAM(rcpu_mode, "i", int, 0); +MODULE_PARM_DESC(rcpu_mode, +"Enable RCPU encapsulation (default 0)"); + +static char *rcpu_dmac = NULL; +LKM_MOD_PARAM(rcpu_dmac, "s", charp, 0); +MODULE_PARM_DESC(rcpu_dmac, +"RCPU destination MAC address (by default use L2 destination MAC address)"); + +static char *rcpu_smac = NULL; +LKM_MOD_PARAM(rcpu_smac, "s", charp, 0); +MODULE_PARM_DESC(rcpu_smac, +"RCPU source MAC address (by default use L2 source MAC address)"); + +static int rcpu_ethertype = 0xde08; +LKM_MOD_PARAM(rcpu_ethertype, "i", int, 0); +MODULE_PARM_DESC(rcpu_ethertype, +"RCPU EtherType (default DE08h)"); + +static int rcpu_signature = 0; +LKM_MOD_PARAM(rcpu_signature, "i", int, 0); +MODULE_PARM_DESC(rcpu_signature, +"RCPU Signature (default is PCI device ID)"); + +static int rcpu_vlan = 1; +LKM_MOD_PARAM(rcpu_vlan, "i", int, 0); +MODULE_PARM_DESC(rcpu_vlan, +"RCPU VLAN ID (default 1)"); + +static int use_rx_skb = 0; +LKM_MOD_PARAM(use_rx_skb, "i", int, 0); +MODULE_PARM_DESC(use_rx_skb, +"Use socket buffers for receive operation (default 0)"); + +static int num_rx_prio = 1; +LKM_MOD_PARAM(num_rx_prio, "i", int, 0); +MODULE_PARM_DESC(num_rx_prio, +"Number of filter priorities per Rx DMA channel"); + +static int rx_rate[4] = { 100000, 100000, 100000, 0 }; +LKM_MOD_PARAM_ARRAY(rx_rate, "1-4i", int, NULL, 0); +MODULE_PARM_DESC(rx_rate, +"Rx rate in packets per second (default 100000)"); + +static int rx_burst[4] = { 0, 0, 0, 0 }; +LKM_MOD_PARAM_ARRAY(rx_burst, "1-4i", int, NULL, 0); +MODULE_PARM_DESC(rx_burst, +"Rx rate burst maximum in packets (default rx_rate/10)"); + +static int check_rcpu_signature = 0; +LKM_MOD_PARAM(check_rcpu_signature, "i", int, 0); +MODULE_PARM_DESC(check_rcpu_signature, +"Check RCPU Signature for Tx packets from RCPU interfaces"); + +static int basedev_suspend = 0; +LKM_MOD_PARAM(basedev_suspend, "i", int, 0); +MODULE_PARM_DESC(basedev_suspend, +"Pause traffic till base device is up (enabled by default in NAPI mode)"); + +static int ftmh_lb_key_ext = 0; +LKM_MOD_PARAM(ftmh_lb_key_ext, "i", int, 0); +MODULE_PARM_DESC(ftmh_lb_key_ext, +"FTMH LB-Key Extension header is present (default 0)"); + +static int ftmh_stacking_ext = 0; +LKM_MOD_PARAM(ftmh_stacking_ext, "i", int, 0); +MODULE_PARM_DESC(ftmh_stacking_ext, +"FTMH Stacking Extension header is present (default 0)"); + +/* Debug levels */ +#define DBG_LVL_VERB 0x1 +#define DBG_LVL_DCB 0x2 +#define DBG_LVL_PKT 0x4 +#define DBG_LVL_SKB 0x8 +#define DBG_LVL_CMD 0x10 +#define DBG_LVL_EVT 0x20 +#define DBG_LVL_IRQ 0x40 +#define DBG_LVL_NAPI 0x80 +#define DBG_LVL_PDMP 0x100 +#define DBG_LVL_FLTR 0x200 +#define DBG_LVL_KCOM 0x400 +#define DBG_LVL_RCPU 0x800 +#define DBG_LVL_WARN 0x1000 +#define DBG_LVL_NDEV 0x2000 +#define DBG_LVL_INST 0x4000 +/* Level to output Dune internal headers Parsing */ +#define DBG_LVL_DUNE 0x8000 +#define DBG_LVL_DCB_TX 0x10000 +#define DBG_LVL_DCB_RX 0x20000 +#define DBG_LVL_PDMP_TX 0x40000 +#define DBG_LVL_PDMP_RX 0x80000 + +#define DBG_VERB(_s) do { if (debug & DBG_LVL_VERB) gprintk _s; } while (0) +#define DBG_PKT(_s) do { if (debug & DBG_LVL_PKT) gprintk _s; } while (0) +#define DBG_SKB(_s) do { if (debug & DBG_LVL_SKB) gprintk _s; } while (0) +#define DBG_CMD(_s) do { if (debug & DBG_LVL_CMD) gprintk _s; } while (0) +#define DBG_EVT(_s) do { if (debug & DBG_LVL_EVT) gprintk _s; } while (0) +#define DBG_IRQ(_s) do { if (debug & DBG_LVL_IRQ) gprintk _s; } while (0) +#define DBG_NAPI(_s) do { if (debug & DBG_LVL_NAPI) gprintk _s; } while (0) +#define DBG_PDMP(_s) do { if (debug & DBG_LVL_PDMP) gprintk _s; } while (0) +#define DBG_FLTR(_s) do { if (debug & DBG_LVL_FLTR) gprintk _s; } while (0) +#define DBG_KCOM(_s) do { if (debug & DBG_LVL_KCOM) gprintk _s; } while (0) +#define DBG_RCPU(_s) do { if (debug & DBG_LVL_RCPU) gprintk _s; } while (0) +#define DBG_WARN(_s) do { if (debug & DBG_LVL_WARN) gprintk _s; } while (0) +#define DBG_NDEV(_s) do { if (debug & DBG_LVL_NDEV) gprintk _s; } while (0) +#define DBG_INST(_s) do { if (debug & DBG_LVL_INST) gprintk _s; } while (0) +#define DBG_DUNE(_s) do { if (debug & DBG_LVL_DUNE) gprintk _s; } while (0) +#define DBG_DCB_TX(_s) do { if (debug & (DBG_LVL_DCB|DBG_LVL_DCB_TX)) \ + gprintk _s; } while (0) +#define DBG_DCB_RX(_s) do { if (debug & (DBG_LVL_DCB|DBG_LVL_DCB_RX)) \ + gprintk _s; } while (0) +#define DBG_DCB(_s) do { if (debug & (DBG_LVL_DCB|DBG_LVL_DCB_TX| \ + DBG_LVL_DCB_RX)) \ + gprintk _s; } while (0) + + +/* This flag is used to indicate if debugging packet function is open or closed */ +static int dbg_pkt_enable = 0; + +/* Module Information */ +#define MODULE_MAJOR 122 +#define MODULE_NAME "linux-bcm-knet" + +#ifndef NAPI_SUPPORT +#define NAPI_SUPPORT 1 +#endif + +#if NAPI_SUPPORT + +static int use_napi = 0; +LKM_MOD_PARAM(use_napi, "i", int, 0); +MODULE_PARM_DESC(use_napi, +"Use NAPI interface (default 0)"); + +static int napi_weight = 64; +LKM_MOD_PARAM(napi_weight, "i", int, 0); +MODULE_PARM_DESC(napi_weight, +"Weight of NAPI interfaces (default 64)"); + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) +#define bkn_napi_enable(_dev, _napi) netif_poll_enable(_dev) +#define bkn_napi_disable(_dev, _napi) netif_poll_disable(_dev) +#define bkn_napi_schedule(_dev, _napi) netif_rx_schedule(_dev) +#define bkn_napi_schedule_prep(_dev, _napi) netif_rx_schedule_prep(_dev) +#define __bkn_napi_schedule(_dev, _napi) __netif_rx_schedule(_dev) +#define bkn_napi_complete(_dev, _napi) netif_rx_complete(_dev) +#else +#define bkn_napi_enable(_dev, _napi) napi_enable(_napi) +#define bkn_napi_disable(_dev, _napi) napi_disable(_napi) +#define bkn_napi_schedule(_dev, _napi) napi_schedule(_napi) +#define bkn_napi_schedule_prep(_dev, _napi) napi_schedule_prep(_napi) +#define __bkn_napi_schedule(_dev, _napi) __napi_schedule(_napi) +#define bkn_napi_complete(_dev, _napi) napi_complete(_napi) +#endif + +#else + +static int use_napi = 0; +static int napi_weight = 0; + +#define bkn_napi_enable(_dev, _napi) +#define bkn_napi_disable(_dev, _napi) +#define bkn_napi_schedule(_dev, _napi) +#define bkn_napi_schedule_prep(_dev, _napi) (0) +#define __bkn_napi_schedule(_dev, _napi) +#define bkn_napi_complete(_dev, _napi) + +#endif + +/* + * If proxy support is compiled in the module will attempt to use + * the user/kernel message service provided by the linux-uk-proxy + * kernel module, otherwise device IOCTL will be used. + */ +#ifndef PROXY_SUPPORT +#define PROXY_SUPPORT 0 +#endif + +#if PROXY_SUPPORT + +#include + +static int use_proxy = 1; +LKM_MOD_PARAM(use_proxy, "i", int, 0); +MODULE_PARM_DESC(use_proxy, +"Use Linux User/Kernel proxy (default 1)"); + +#define PROXY_SERVICE_CREATE(_s,_q,_f) linux_uk_proxy_service_create(_s,_q,_f) +#define PROXY_SERVICE_DESTROY(_s) linux_uk_proxy_service_destroy(_s); +#define PROXY_SEND(_s,_m,_l) linux_uk_proxy_send(_s,_m,_l) +#define PROXY_RECV(_s,_m,_l) linux_uk_proxy_recv(_s,_m,_l) + +#else + +static int use_proxy = 0; + +#define PROXY_SERVICE_CREATE(_s,_q,_f) +#define PROXY_SERVICE_DESTROY(_s) +#define PROXY_SEND(_s,_m,_l) +#define PROXY_RECV(_s,_m,_l) (-1) + +#endif + +/* Compatibility */ +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) +#define skb_copy_to_linear_data(_skb, _pkt, _len) \ + eth_copy_and_sum(_skb, _pkt, _len, 0) +struct napi_struct { int not_used; }; +#define netif_napi_add(_dev, _napi, _poll, _weight) do { \ + (_dev)->poll = _poll; \ + (_dev)->weight = _weight; \ +} while(0) +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)) +#define SKB_PADTO(_skb,_len) (((_skb = skb_padto(_skb,_len)) == NULL) ? -1 : 0) +#else +#define SKB_PADTO(_skb,_len) skb_padto(_skb,_len) +#endif + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,12)) +#define skb_header_cloned(_skb) \ + skb_cloned(_skb) +#endif + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27) +static inline void *netdev_priv(struct net_device *dev) +{ + return dev->priv; +} +#endif /* KERNEL_VERSION(2,4,27) */ + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,23) +/* Special check for MontaVista 2.4.20 MIPS */ +#if !(defined(MAX_USER_RT_PRIO) && defined(CONFIG_MIPS)) +static inline void free_netdev(struct net_device *dev) +{ + kfree(dev); +} +#endif +static inline void netif_poll_disable(struct net_device *dev) +{ + while (test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state)) { + /* No hurry. */ + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(1); + } +} +static inline void netif_poll_enable(struct net_device *dev) +{ + clear_bit(__LINK_STATE_RX_SCHED, &dev->state); +} +#endif /* KERNEL_VERSION(2,4,23) */ + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,4,21) +static struct sk_buff *skb_pad(struct sk_buff *skb, int pad) +{ + struct sk_buff *nskb; + + /* If the skbuff is non linear tailroom is always zero.. */ + if(skb_tailroom(skb) >= pad) + { + memset(skb->data+skb->len, 0, pad); + return skb; + } + + nskb = skb_copy_expand(skb, skb_headroom(skb), skb_tailroom(skb) + pad, GFP_ATOMIC); + kfree_skb(skb); + if(nskb) + memset(nskb->data+nskb->len, 0, pad); + return nskb; +} +static inline struct sk_buff *skb_padto(struct sk_buff *skb, unsigned int len) +{ + unsigned int size = skb->len; + if(likely(size >= len)) + return skb; + return skb_pad(skb, len-size); +} +#endif /* KERNEL_VERSION(2,4,21) */ + +#ifdef LINUX_BDE_DMA_DEVICE_SUPPORT +#define DMA_DEV device +#define DMA_FROMDEV DMA_FROM_DEVICE +#define DMA_TODEV DMA_TO_DEVICE +#define DMA_MAP_SINGLE(d,p,s,r) dma_map_single(d,p,s,r) +#define DMA_UNMAP_SINGLE(d,a,s,r) dma_unmap_single(d,a,s,r) +#define DMA_ALLOC_COHERENT(d,s,h) dma_alloc_coherent(d,s,h,GFP_ATOMIC|GFP_DMA32) +#define DMA_FREE_COHERENT(d,s,a,h) dma_free_coherent(d,s,a,h) +#else +#define DMA_DEV pci_dev +#define DMA_FROMDEV PCI_DMA_FROMDEVICE +#define DMA_TODEV PCI_DMA_TODEVICE +#define DMA_MAP_SINGLE(d,p,s,r) pci_map_single(d,p,s,r) +#define DMA_UNMAP_SINGLE(d,a,s,r) pci_unmap_single(d,a,s,r) +#define DMA_ALLOC_COHERENT(d,s,h) pci_alloc_consistent(d,s,h) +#define DMA_FREE_COHERENT(d,s,a,h) pci_free_consistent(d,s,a,h) +#endif + +/* RCPU operations */ +#define RCPU_OPCODE_RX 0x10 +#define RCPU_OPCODE_TX 0x20 + +/* RCPU flags */ +#define RCPU_F_MODHDR 0x4 + +/* RCPU encapsulation */ +#define RCPU_HDR_SIZE 32 +#define RCPU_TX_META_SIZE 32 +#define RCPU_TX_ENCAP_SIZE (RCPU_HDR_SIZE + RCPU_TX_META_SIZE) +#define RCPU_RX_META_SIZE 64 +#define RCPU_RX_ENCAP_SIZE (RCPU_HDR_SIZE + RCPU_RX_META_SIZE) + +static volatile int module_initialized; + +static ibde_t *kernel_bde = NULL; + +/* Descriptor info */ +typedef struct bkn_desc_info_s { + uint32_t *dcb_mem; + dma_addr_t dcb_dma; + struct sk_buff *skb; + dma_addr_t skb_dma; + uint32_t dma_size; +} bkn_desc_info_t; + +/* DCB chain info */ +typedef struct bkn_dcb_chain_s { + struct list_head list; + int dcb_cnt; + int dcb_cur; + uint32_t *dcb_mem; + dma_addr_t dcb_dma; +} bkn_dcb_chain_t; + +#define MAX_TX_DCBS 32 +#define MAX_RX_DCBS 32 + +#define NUM_DMA_CHAN 4 +#define NUM_RX_CHAN 3 +#define API_RX_CHAN 0 + +/* Device control info */ +typedef struct bkn_switch_info_s { + struct list_head list; + struct list_head ndev_list; /* Associated virtual Ethernet interfaces */ + struct net_device **ndevs; /* Indexed array of ndev_list */ + int ndev_max; /* Size of indexed array */ + struct list_head rxpf_list; /* Associated Rx packet filters */ + volatile void *base_addr; /* Base address for PCI register access */ + struct DMA_DEV *dma_dev; /* Required for DMA memory control */ + struct pci_dev *pdev; /* Required for DMA memory control */ + struct net_device *dev; /* Base network device */ + struct napi_struct napi; /* New NAPI */ + struct timer_list timer; /* Retry/resource timer */ + int timer_queued; /* Flag indicating queued timer function */ + uint32_t timer_runs; /* Timer function runs (debug only) */ + struct timer_list rxtick; /* Rx rate control timer */ + uint32_t rxticks_per_sec; /* Rx rate control update frequency */ + uint32_t rxtick_jiffies; /* Time between updates (in jiffies) */ + uint32_t rxticks; /* Rx rate control debug counter */ + uint32_t interrupts; /* Total number of interrupts */ + spinlock_t lock; /* Main lock for device */ + int dev_no; /* Device number (from BDE) */ + int cpu_no; /* Cpu number. 1 for iHost(AXI),0 for others */ + int dcb_type; /* DCB type */ + int dcb_wsize; /* DCB size (in 32-bit words) */ + uint32_t cmic_type; /* CMIC type (CMICe or CMICm) */ + uint32_t irq_mask; /* Active IRQs for DMA control */ + uint32_t napi_poll_mode; /* NAPI is in polling mode */ + uint32_t napi_not_done; /* NAPI poll did not process all packets */ + uint32_t napi_poll_again; /* Used if DCB chain is restarted */ + uint32_t tx_yield; /* Tx schedule for Continuous DMA and Non-NAPI mode */ + void *dcb_mem; /* Logical pointer to DCB memory */ + dma_addr_t dcb_dma; /* Physical bus address for DCB memory */ + int dcb_mem_size; /* Total size of allocated DCB memory */ + uint32_t dma_events; /* DMA events pending for BCM API */ + uint32_t rcpu_sig; /* RCPU signature */ + dma_addr_t halt_addr[NUM_DMA_CHAN]; /* DMA halt address */ + uint32_t cdma_channels; /* Active channels for Continuous DMA mode */ + uint32_t inst_id; /* Instance id of this device */ + int evt_idx; /* Event queue index for this device*/ + int basedev_suspended; /* Base device suspended */ + struct { + bkn_desc_info_t desc[MAX_TX_DCBS+1]; + int free; /* Number of free Tx DCBs */ + int cur; /* Index of current Tx DCB */ + int dirty; /* Index of next Tx DCB to complete */ + int api_active; /* BCM Tx API is in progress */ + int suspends; /* Calls to netif_stop_queue (debug only) */ + struct list_head api_dcb_list; /* Tx DCB chains from BCM Tx API */ + bkn_dcb_chain_t *api_dcb_chain; /* Current Tx DCB chain */ + bkn_dcb_chain_t *api_dcb_chain_end; /* Tx DCB chain end */ + uint32_t pkts; /* Tx packet counter */ + uint32_t pkts_d_no_skb; /* Tx drop - skb allocation failed */ + uint32_t pkts_d_rcpu_encap; /* Tx drop - bad RCPU encapsulation */ + uint32_t pkts_d_rcpu_sig; /* Tx drop - bad RCPU signature */ + uint32_t pkts_d_rcpu_meta; /* Tx drop - bad RCPU meta data */ + uint32_t pkts_d_pad_fail; /* Tx drop - pad to minimum size failed */ + uint32_t pkts_d_dma_resrc; /* Tx drop - no DMA resources */ + uint32_t pkts_d_callback; /* Tx drop - consumed by call-back */ + uint32_t pkts_d_no_link; /* Tx drop - software link down */ + uint32_t pkts_d_over_limit; /* Tx drop - length is out of range */ + } tx; + struct { + bkn_desc_info_t desc[MAX_RX_DCBS+1]; + int free; /* Number of free Rx DCBs */ + int cur; /* Index of current Rx DCB */ + int dirty; /* Index of next Rx DCB to complete */ + int running; /* Rx DMA is active */ + int api_active; /* BCM Rx API is active */ + int chain_complete; /* All DCBs in chain processed */ + int sync_err; /* Chain done with incomplete DCBs (debug) */ + int sync_retry; /* Total retry times for sync error (debug) */ + int sync_maxloop; /* Max loop times once in recovering sync (debug) */ + int use_rx_skb; /* Use SKBs for DMA */ + uint32_t rate_max; /* Rx rate in packets/sec */ + uint32_t burst_max; /* Rx burst size in number of packets */ + uint32_t tokens; /* Tokens for Rx rate control */ + uint32_t rate; /* Current packet rate */ + unsigned long tok_jif; /* Jiffies at last token update */ + unsigned long rate_jif; /* Jiffies at last rate update */ + struct list_head api_dcb_list; /* Rx DCB chains from BCM Rx API */ + bkn_dcb_chain_t *api_dcb_chain; /* Current Rx DCB chain */ + bkn_dcb_chain_t *api_dcb_chain_end; /* Rx DCB chain end */ + uint32_t pkts; /* Rx packet counter */ + uint32_t pkts_ref; /* Rx packet count for rate calculation */ + uint32_t pkts_f_api; /* Rx packets filtered to API */ + uint32_t pkts_f_netif; /* Rx packets filtered to net interface */ + uint32_t pkts_m_api; /* Rx packets mirrored to API */ + uint32_t pkts_m_netif; /* Rx packets mirrored to net interface */ + uint32_t pkts_d_no_skb; /* Rx drop - skb allocation failed */ + uint32_t pkts_d_no_match; /* Rx drop - no matching filters */ + uint32_t pkts_d_unkn_netif; /* Rx drop - unknown net interface ID */ + uint32_t pkts_d_unkn_dest; /* Rx drop - unknown destination type */ + uint32_t pkts_d_callback; /* Rx drop - consumed by call-back */ + uint32_t pkts_d_no_link; /* Rx drop - software link down */ + uint32_t pkts_d_no_api_buf; /* Rx drop - no API buffers */ + } rx[NUM_RX_CHAN]; +} bkn_switch_info_t; + +#define BKN_DNX_HDR_MAX_SIZE 40 +/* FTMH */ +#define BKN_DNX_FTMH_SIZE_BYTE 9 +#define BKN_DNX_FTMH_LB_EXT_SIZE_BYTE 1 +#define BKN_DNX_FTMH_STACKING_SIZE_BYTE 2 +#define BKN_DNX_FTMH_DEST_EXT_SIZE_BYTE 2 +#define BKN_DNX_FTMH_LB_EXT_SIZE_BYTE 1 +#define BKN_DNX_FTMH_PKT_SIZE_MSB 0 +#define BKN_DNX_FTMH_PKT_SIZE_NOF_BITS 14 +#define BKN_DNX_FTMH_TC_MSB 14 +#define BKN_DNX_FTMH_TC_NOF_BITS 3 +#define BKN_DNX_FTMH_SRC_SYS_PORT_MSB 17 +#define BKN_DNX_FTMH_SRC_SYS_PORT_NOF_BITS 16 +#define BKN_DNX_FTMH_EXT_DSP_EXIST_MSB 68 +#define BKN_DNX_FTMH_EXT_DSP_EXIST_NOF_BITS 1 +#define BKN_DNX_FTMH_EXT_MSB 45 +#define BKN_DNX_FTMH_EXT_NOF_BITS 2 +#define BKN_DNX_FTMH_FIRST_EXT_MSB 72 +#define BKN_DNX_FTMH_ACTION_TYPE_MSB 43 +#define BKN_DNX_FTMH_ACTION_TYPE_NOF_BITS 2 +#define BKN_DNX_FTMH_PPH_TYPE_MSB 45 +#define BKN_DNX_FTMH_PPH_TYPE_NOF_BITS 2 +/* PPH */ +#define BKN_DNX_PPH_SIZE_BYTE 7 +#define BKN_DNX_PPH_EEI_EXTENSION_PRESENT_MSB 0 +#define BKN_DNX_PPH_EEI_EXTENSION_PRESENT_NOF_BITS 1 +#define BKN_DNX_PPH_LEARN_EXENSION_PRESENT_MSB 1 +#define BKN_DNX_PPH_LEARN_EXENSION_PRESENT_NOF_BITS 1 +#define BKN_DNX_PPH_FHEI_SIZE_MSB 2 +#define BKN_DNX_PPH_FHEI_SIZE_NOF_BITS 2 +#define BKN_DNX_PPH_FORWARD_CODE_MSB 4 +#define BKN_DNX_PPH_FORWARD_CODE_NOF_BITS 4 +#define BKN_DNX_PPH_VSI_MSB 22 +#define BKN_DNX_PPH_VSI_NOF_BITS 16 +/* FHEI TRAP/SNOOP 3B */ +#define BKN_DNX_PPH_FHEI_3B_SIZE_BYTE 3 +#define BKN_DNX_PPH_FHEI_5B_SIZE_BYTE 5 +#define BKN_DNX_PPH_FHEI_8B_SIZE_BYTE 8 +#define BKN_DNX_PPH_FHEI_TRAP_SNOOP_3B_CPU_TRAP_CODE_QUALIFIER_MSB 0 +#define BKN_DNX_PPH_FHEI_TRAP_SNOOP_3B_CPU_TRAP_CODE_QUALIFIER_NOF_BITS 16 +#define BKN_DNX_PPH_FHEI_TRAP_SNOOP_3B_CPU_TRAP_CODE_MSB 16 +#define BKN_DNX_PPH_FHEI_TRAP_SNOOP_3B_CPU_TRAP_CODE_NOF_BITS 8 +/* PPH extension */ +#define BKN_DNX_PPH_EXPLICIT_EDITING_INFOMATION_EXTENSION_SIZE_BYTE 3 +#define BKN_DNX_PPH_LEARN_EXTENSION_SIZE_BYTE 5 + + +/* ftmh action type. */ +typedef enum bkn_dnx_ftmh_action_type_e { + BKN_DNX_FTMH_ACTION_TYPE_FORWARD = 0, /* TM action is forward */ + BKN_DNX_FTMH_ACTION_TYPE_SNOOP = 1, /* TM action is snoop */ + BKN_DNX_FTMH_ACTION_TYPE_INBOUND_MIRROR = 2, /* TM action is inbound mirror. */ + BKN_DNX_FTMH_ACTION_TYPE_OUTBOUND_MIRROR = 3 /* TM action is outbound mirror. */ +}bkn_dnx_ftmh_action_type_t; + +/* ftmh dest extension. */ +typedef struct bkn_dnx_ftmh_dest_extension_s { + uint8 valid; /* Set if the extension is present */ + uint32_t dst_sys_port; /* Destination System Port */ +} bkn_dnx_ftmh_dest_extension_t; + +/* dnx packet */ +typedef struct bkn_pkt_dnx_s { + uint32_t ntwrk_header_ptr; + struct { + uint32_t packet_size; /* Packet size in bytes */ + uint32_t action_type; /* Indicates if the copy is one of the Forward Snoop or Mirror packet copies */ + uint32_t pph_type; + uint32_t prio; /* Traffic class */ + uint32_t src_sys_port; /* Source System port*/ + } ftmh; + struct { + uint32_t vsi; + uint32_t trap_qualifier; /* RAW Data */ + uint32_t trap_id; /* RAW Data */ + } internal; +} bkn_dnx_packet_info; + + +#define PREV_IDX(_cur, _max) (((_cur) == 0) ? (_max) - 1 : (_cur) - 1) + +#if defined(CMIC_SOFT_BYTE_SWAP) + +#define CMIC_SWAP32(_x) ((((_x) & 0xff000000) >> 24) \ + | (((_x) & 0x00ff0000) >> 8) \ + | (((_x) & 0x0000ff00) << 8) \ + | (((_x) & 0x000000ff) << 24)) + +#define DEV_READ32(_d, _a, _p) \ + do { \ + uint32_t _data; \ + _data = (((volatile uint32_t *)(_d)->base_addr)[(_a)/4]); \ + *(_p) = CMIC_SWAP32(_data); \ + } while(0) + +#define DEV_WRITE32(_d, _a, _v) \ + do { \ + uint32_t _data = CMIC_SWAP32(_v); \ + ((volatile uint32_t *)(_d)->base_addr)[(_a)/4] = (_data); \ + } while(0) + +#else + +#define DEV_READ32(_d, _a, _p) \ + do { \ + *(_p) = (((volatile uint32_t *)(_d)->base_addr)[(_a)/4]); \ + } while(0) + +#define DEV_WRITE32(_d, _a, _v) \ + do { \ + ((volatile uint32_t *)(_d)->base_addr)[(_a)/4] = (_v); \ + } while(0) + +#endif /* defined(CMIC_SOFT_BYTE_SWAP) */ + +#define MEMORY_BARRIER mb() + +/* Default random MAC address has Broadcom OUI with local admin bit set */ +static u8 bkn_dev_mac[6] = { 0x02, 0x10, 0x18, 0x00, 0x00, 0x00 }; + +static u8 bkn_rcpu_dmac[6]; +static u8 bkn_rcpu_smac[6]; + +/* Driver Proc Entry root */ +static struct proc_dir_entry *bkn_proc_root = NULL; + +typedef struct bkn_priv_s { + struct list_head list; + struct net_device_stats stats; + struct net_device *dev; + bkn_switch_info_t *sinfo; + int id; + int type; + int port; + uint8_t itmh[4]; + int qnum; + uint32_t vlan; + uint32_t flags; + uint32_t cb_user_data; +} bkn_priv_t; + +typedef struct bkn_filter_s { + struct list_head list; + int dev_no; + unsigned long hits; + kcom_filter_t kf; +} bkn_filter_t; + + +/* + * Multiple instance support in KNET + */ +static int _bkn_multi_inst = 0; +typedef struct { + wait_queue_head_t evt_wq; + int evt_wq_put; + int evt_wq_get; + uint32_t inst_id; +} bkn_evt_resource_t; + +static bkn_evt_resource_t _bkn_evt[LINUX_BDE_MAX_DEVICES]; + +static int bkn_knet_dev_init(int d); +static int bkn_knet_dev_reinit(int d); + +/* IOCTL debug counters */ +static int ioctl_cmd; +static int ioctl_evt; + +/* Switch devices */ +LIST_HEAD(_sinfo_list); + +/* Reallocation chunk size for netif array */ +#define NDEVS_CHUNK 64 + +/* User call-backs */ +static knet_skb_cb_f knet_rx_cb = NULL; +static knet_skb_cb_f knet_tx_cb = NULL; +static knet_filter_cb_f knet_filter_cb = NULL; + +/* + * Thread management + */ + +#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)) +/* + * Old style using kernel_thread() + */ +typedef struct { + const char * name; + volatile int pid; + volatile int run; + struct completion completion; + int state; +} bkn_thread_ctrl_t; + +static int +bkn_thread_start(bkn_thread_ctrl_t *tc, const char *name, + int (*threadfn)(void *)) +{ + if (name == NULL) { + return -1; + } + tc->name = name; + tc->pid = kernel_thread(threadfn, tc, 0); + if (tc->pid < 0) { + tc->pid = 0; + return -1; + } + tc->run = 1; + init_completion(&tc->completion); + return 0; +} + +static int +bkn_thread_stop(bkn_thread_ctrl_t *tc) +{ + if (tc->pid == 0) { + return 0; + } + tc->run = 0; + kill_proc(tc->pid, SIGTERM, 1); + wait_for_completion(&tc->completion); + return 0; +} + +static int +bkn_thread_should_stop(bkn_thread_ctrl_t *tc) +{ + if (tc->run) { + return 0; + } + tc->pid = 0; + return 1; +} + +static void +bkn_thread_boot(bkn_thread_ctrl_t *tc) +{ + siginitsetinv(¤t->blocked, sigmask(SIGTERM) | sigmask(SIGKILL)); +} + +static void +bkn_thread_exit(bkn_thread_ctrl_t *tc) +{ + complete_and_exit(&tc->completion, 0); +} + +static void +bkn_sleep(int clicks) +{ + wait_queue_head_t wq; + + init_waitqueue_head(&wq); + sleep_on_timeout(&wq, clicks); +} +#else +/* + * New style using kthread API + */ +#include +typedef struct { + const char * name; + struct task_struct *task; + int state; +} bkn_thread_ctrl_t; + +static int +bkn_thread_start(bkn_thread_ctrl_t *tc, const char *name, + int (*threadfn)(void *)) +{ + if (name == NULL) { + return -1; + } + tc->name = name; + tc->task = kthread_run(threadfn, tc, name); + if (IS_ERR(tc->task)) { + tc->task = NULL; + return -1; + } + return 0; +} + +static int +bkn_thread_stop(bkn_thread_ctrl_t *tc) +{ + if (tc->task == NULL) { + return 0; + } + send_sig(SIGTERM, tc->task, 0); + return kthread_stop(tc->task); +} + +static int +bkn_thread_should_stop(bkn_thread_ctrl_t *tc) +{ + return kthread_should_stop(); +} + +static void +bkn_thread_boot(bkn_thread_ctrl_t *tc) +{ + allow_signal(SIGTERM); + allow_signal(SIGKILL); +} + +static void +bkn_thread_exit(bkn_thread_ctrl_t *tc) +{ +} + +static void +bkn_sleep(int clicks) +{ + wait_queue_head_t wq; + + init_waitqueue_head(&wq); + wait_event_timeout(wq, 0, clicks); +} +#endif + +static bkn_thread_ctrl_t bkn_cmd_ctrl; +static bkn_thread_ctrl_t bkn_evt_ctrl; + +/* + * On XGS devices bit 15 fo the Transferred Bytes field in + * the DCBs is used to indicate that kernel processing is + * complete. Using this bit reduces the theoretically maximum + * supported packet size from 64K to 32K, but this is still + * adequate for 16K jumbo packets. + */ +#define SOC_DCB_KNET_DONE 0x8000 +#define SOC_DCB_KNET_COUNT_MASK 0x7fff +#define SOC_DCB_META_OFFSET 2 + +/* Default channel configuration */ +#define XGS_DMA_TX_CHAN 0 +#define XGS_DMA_RX_CHAN 1 + +/* CMIC registers */ +#define CMIC_DMA_CTRLr 0x00000100 +#define CMIC_DMA_STATr 0x00000104 +#define CMIC_DMA_DESC0r 0x00000110 +#define CMIC_IRQ_STATr 0x00000144 +#define CMIC_IRQ_MASKr 0x00000148 +#define CMIC_DEV_REV_IDr 0x00000178 + +/* CMIC interrupts reserved for kernel handler */ +#define CMIC_TXRX_IRQ_MASK 0x7f80 + +/* CMICm registers */ +#define CMICM_CMC_BASE 0x00031000 +#define CMICM_DMA_CTRLr (CMICM_CMC_BASE + 0x00000140) +#define CMICM_DMA_STATr (CMICM_CMC_BASE + 0x00000150) +#define CMICM_DMA_STAT_CLRr (CMICM_CMC_BASE + 0x000001a4) +#define CMICM_DMA_DESC0r (CMICM_CMC_BASE + 0x00000158) +#define CMICM_DMA_HALT_ADDRr (CMICM_CMC_BASE + 0x00000120) +#define CMICM_IRQ_STATr (CMICM_CMC_BASE + 0x00000400) +#define CMICM_IRQ_PCI_MASKr (CMICM_CMC_BASE + 0x00000414) +#define CMICM_IRQ_UC0_MASKr (CMICM_CMC_BASE + 0x00000428) +#define CMICM_DEV_REV_IDr 0x00010224 + +/* CMICm interrupts reserved for kernel handler */ +#define CMICM_TXRX_IRQ_MASK 0xff00 + +/* CMICd increased interrupts reserved for kernel handler */ +#define CMICD_CTRLD_IRQ_MASK 0x78000000 + +#define DEV_HAS_CMICM(_sinfo) ((_sinfo)->cmic_type == 'm') +#define CDMA_CH(_d, _ch) ((_d)->cdma_channels & (1 << (_ch))) + +/* + * DMA_STAT: control bits + * + * xxx_SET and xxx_CLR can be WRITTEN to CMIC_DMA_STAT + * xxx_TST can be masked against values read from CMIC_DMA_STAT. + * Argument required: 0 <= ch <= 3 + */ + +#define DS_DMA_ACTIVE(ch) (0x00040000 << (ch)) +#define DS_DMA_EN_SET(ch) (0x80|(ch)) +#define DS_DMA_EN_CLR(ch) (0x00|(ch)) +#define DS_DMA_EN_TST(ch) (0x00000001 << (ch)) + +#define DS_CHAIN_DONE_SET(ch) (0x80|(4+(ch))) +#define DS_CHAIN_DONE_CLR(ch) (0x00|(4+(ch))) +#define DS_CHAIN_DONE_TST(ch) (0x00000010 << (ch)) + +#define DS_DESC_DONE_SET(ch) (0x80|(8+(ch))) +#define DS_DESC_DONE_CLR(ch) (0x00|(8+(ch))) +#define DS_DESC_DONE_TST(ch) (0x00000100 << (ch)) + +#define DC_ABORT_DMA(ch) (0x04 << (8 * (ch))) + +#define DS_CMC_DESCRD_CMPLT_CLR(ch) (0x00000001 << (ch)) +#define DS_CMC_CTRLD_INT_CLR(ch) (0x00000100 << (ch)) +#define DS_CMC_DMA_ACTIVE(ch) (0x00000100 << (ch)) + +/* + * DMA_CTRL: control bits + */ +#define DC_CMC_DIRECTION (0x00000001) +#define DC_CMC_ENABLE (0x00000002) +#define DC_CMC_ABORT (0x00000004) +#define DC_CMC_CTRLD_INT (0x00000100) +#define DC_CMC_CONTINUOUS (0x00000200) + +/* + * Per-channel operations. + * These are the basis for the TX/RX functions + */ + +static inline void +xgs_dma_chain_clear(bkn_switch_info_t *sinfo, int chan) +{ + DBG_IRQ(("Clear chain on device %d chan %d\n", + sinfo->dev_no, chan)); + DEV_WRITE32(sinfo, CMIC_DMA_STATr, DS_DMA_EN_CLR(chan)); + DEV_WRITE32(sinfo, CMIC_DMA_STATr, DS_CHAIN_DONE_CLR(chan)); + + MEMORY_BARRIER; +} + +static inline void +xgs_dma_desc_clear(bkn_switch_info_t *sinfo, int chan) +{ + uint32_t val; + + DBG_IRQ(("Clear desc on device %d chan %d\n", + sinfo->dev_no, chan)); + DEV_WRITE32(sinfo, CMIC_DMA_STATr, DS_DESC_DONE_CLR(chan)); + + MEMORY_BARRIER; + + /* Flush write buffer */ + DEV_READ32(sinfo, CMIC_DMA_STATr, &val); + + MEMORY_BARRIER; +} + +static int +xgs_dma_chan_clear(bkn_switch_info_t *sinfo, int chan) +{ + xgs_dma_chain_clear(sinfo, chan); + xgs_dma_desc_clear(sinfo, chan); + + return 0; +} + +static int +xgs_dma_chan_init(bkn_switch_info_t *sinfo, int chan, int dir) +{ + uint32_t cdc; + + DEV_READ32(sinfo, CMIC_DMA_CTRLr, &cdc); + + cdc &= ~(0x9 << (8 * chan)); + if (dir) { + cdc |= 0x1 << (8 * chan); + } else { + cdc |= 0x8 << (8 * chan); + } + + DEV_WRITE32(sinfo, CMIC_DMA_CTRLr, cdc); + + return 0; +} + +static int +xgs_dma_chan_start(bkn_switch_info_t *sinfo, int chan, dma_addr_t dcb) +{ + /* Write the DCB address to the DESC address for this channel */ + DEV_WRITE32(sinfo, CMIC_DMA_DESC0r + 4 * chan, dcb); + + MEMORY_BARRIER; + + /* Kick it off */ + DEV_WRITE32(sinfo, CMIC_DMA_STATr, DS_DMA_EN_SET(chan)); + + MEMORY_BARRIER; + + return 0; +} + +static int +xgs_dma_chan_abort(bkn_switch_info_t *sinfo, int chan, int polls) +{ + uint32_t ctrl, dma_stat; + int p; + + /* Clear enable */ + DEV_WRITE32(sinfo, CMIC_DMA_STATr, DS_DMA_EN_CLR(chan)); + + MEMORY_BARRIER; + + /* Abort the channel */ + DEV_READ32(sinfo, CMIC_DMA_CTRLr, &ctrl); + DEV_WRITE32(sinfo, CMIC_DMA_CTRLr, ctrl | DC_ABORT_DMA(chan)); + + MEMORY_BARRIER; + + /* Poll for abort completion */ + for (p = 0; p < polls; p++) { + DEV_READ32(sinfo, CMIC_DMA_STATr, &dma_stat); + if (!(dma_stat & DS_DMA_ACTIVE(chan))) { + /* Restore previous control value */ + DEV_WRITE32(sinfo, CMIC_DMA_CTRLr, ctrl); + + MEMORY_BARRIER; + + /* Clear up channel */ + xgs_dma_chan_clear(sinfo, chan); + + return polls; + } + } + DBG_WARN(("DMA channel %d abort failed\n", chan)); + + return -1; +} + +static inline void +xgs_irq_mask_set(bkn_switch_info_t *sinfo, uint32_t mask) +{ + if (sinfo->napi_poll_mode) { + mask = 0; + } + lkbde_irq_mask_set(sinfo->dev_no | LKBDE_ISR2_DEV, CMIC_IRQ_MASKr, + mask, CMIC_TXRX_IRQ_MASK); +} + +static inline void +xgs_irq_mask_enable(bkn_switch_info_t *sinfo, int chan, int update_hw) +{ + uint32_t mask; + + if (chan == XGS_DMA_TX_CHAN) { + mask = 0x100; + } else { + mask = 0x180 << (2 * chan); + } + + sinfo->irq_mask |= mask; + + if (update_hw) { + xgs_irq_mask_set(sinfo, sinfo->irq_mask); + } +} + +static inline void +xgs_irq_mask_disable(bkn_switch_info_t *sinfo, int chan, int update_hw) +{ + uint32_t mask; + + if (chan == XGS_DMA_TX_CHAN) { + mask = 0x100; + } else { + mask = 0x180 << (2 * chan); + } + + sinfo->irq_mask &= ~mask; + + if (update_hw) { + xgs_irq_mask_set(sinfo, sinfo->irq_mask); + } +} + +static inline void +xgsm_dma_chain_clear(bkn_switch_info_t *sinfo, int chan) +{ + uint32_t cdc; + + /* Disabing DMA clears chain done */ + DEV_READ32(sinfo, CMICM_DMA_CTRLr + 4 * chan, &cdc); + cdc &= ~(DC_CMC_ENABLE | DC_CMC_ABORT); + DEV_WRITE32(sinfo, CMICM_DMA_CTRLr + 4 * chan, cdc); + + MEMORY_BARRIER; +} + +static inline void +xgsm_dma_desc_clear(bkn_switch_info_t *sinfo, int chan) +{ + uint32_t val; + + val = DS_CMC_DESCRD_CMPLT_CLR(chan); + if (CDMA_CH(sinfo, chan)) { + val |= DS_CMC_CTRLD_INT_CLR(chan); + } + DEV_WRITE32(sinfo, CMICM_DMA_STAT_CLRr, val); + + MEMORY_BARRIER; + + /* Flush write buffer */ + DEV_READ32(sinfo, CMICM_DMA_STAT_CLRr, &val); + + MEMORY_BARRIER; +} + +static int +xgsm_dma_chan_clear(bkn_switch_info_t *sinfo, int chan) +{ + xgsm_dma_chain_clear(sinfo, chan); + xgsm_dma_desc_clear(sinfo, chan); + + return 0; +} + +static inline void +xgsm_cdma_halt_set(bkn_switch_info_t *sinfo, int chan) +{ + DEV_WRITE32(sinfo, CMICM_DMA_HALT_ADDRr + 4 * chan, + sinfo->halt_addr[chan]); + + MEMORY_BARRIER; +} + +static int +xgsm_dma_chan_init(bkn_switch_info_t *sinfo, int chan, int dir) +{ + uint32_t cdc; + + DEV_READ32(sinfo, CMICM_DMA_CTRLr + 4 * chan, &cdc); + cdc &= ~DC_CMC_DIRECTION; + if (dir) { + cdc |= DC_CMC_DIRECTION; + } + if (CDMA_CH(sinfo, chan)) { + cdc |= DC_CMC_CONTINUOUS | DC_CMC_CTRLD_INT; + xgsm_cdma_halt_set(sinfo, chan); + } + DEV_WRITE32(sinfo, CMICM_DMA_CTRLr + 4 * chan, cdc); + + return 0; +} + +static int +xgsm_dma_chan_start(bkn_switch_info_t *sinfo, int chan, dma_addr_t dcb) +{ + uint32_t cdc; + + /* Write the DCB address to the DESC address for this channel */ + DEV_WRITE32(sinfo, CMICM_DMA_DESC0r + 4 * chan, dcb); + + MEMORY_BARRIER; + + /* Kick it off */ + DEV_READ32(sinfo, CMICM_DMA_CTRLr + 4 * chan, &cdc); + cdc |= DC_CMC_ENABLE; + DEV_WRITE32(sinfo, CMICM_DMA_CTRLr + 4 * chan, cdc); + + MEMORY_BARRIER; + + return 0; +} + +static int +xgsm_dma_chan_abort(bkn_switch_info_t *sinfo, int chan, int polls) +{ + uint32_t ctrl, dma_stat; + int p; + + /* Skip abort sequence if channel is not active */ + DEV_READ32(sinfo, CMICM_DMA_STATr, &dma_stat); + if (!(dma_stat & DS_CMC_DMA_ACTIVE(chan))) { + return 0; + } + + /* Abort the channel */ + DEV_READ32(sinfo, CMICM_DMA_CTRLr + 4 * chan, &ctrl); + ctrl |= (DC_CMC_ENABLE | DC_CMC_ABORT); + DEV_WRITE32(sinfo, CMICM_DMA_CTRLr + 4 * chan, ctrl); + + MEMORY_BARRIER; + + /* Poll for abort completion */ + for (p = 0; p < polls; p++) { + DEV_READ32(sinfo, CMICM_DMA_STATr, &dma_stat); + if (!(dma_stat & DS_CMC_DMA_ACTIVE(chan))) { + /* Clear up channel */ + xgsm_dma_chan_clear(sinfo, chan); + return polls; + } + } + DBG_WARN(("DMA channel %d abort failed\n", chan)); + + return -1; +} + +static inline void +xgsm_irq_mask_set(bkn_switch_info_t *sinfo, uint32_t mask) +{ + uint32_t irq_mask_reg = CMICM_IRQ_PCI_MASKr; + uint32_t ctrld_mask = 0; + + if (sinfo->napi_poll_mode) { + mask = 0; + } + if (sinfo->cpu_no == 1) { + irq_mask_reg = CMICM_IRQ_UC0_MASKr; + } + + /* Get the Controlled Interrupts mask for Continuous DMA mode */ + ctrld_mask |= (sinfo->cdma_channels << 27) & CMICD_CTRLD_IRQ_MASK; + + lkbde_irq_mask_set(sinfo->dev_no | LKBDE_ISR2_DEV, irq_mask_reg, + mask, CMICM_TXRX_IRQ_MASK | ctrld_mask); +} + +static inline void +xgsm_irq_mask_enable(bkn_switch_info_t *sinfo, int chan, int update_hw) +{ + uint32_t mask; + + if (CDMA_CH(sinfo, chan)) { + mask = 0x08000000 << chan; + } else { + if (chan == XGS_DMA_TX_CHAN) { + mask = 0x8000; + } else { + mask = 0xc000 >> (2 * chan); + } + } + + sinfo->irq_mask |= mask; + + if (update_hw) { + xgsm_irq_mask_set(sinfo, sinfo->irq_mask); + } +} + +static inline void +xgsm_irq_mask_disable(bkn_switch_info_t *sinfo, int chan, int update_hw) +{ + uint32_t mask; + + if (CDMA_CH(sinfo, chan)) { + mask = 0x08000000 << chan; + } else { + if (chan == XGS_DMA_TX_CHAN) { + mask = 0x8000; + } else { + mask = 0xc000 >> (2 * chan); + } + } + + sinfo->irq_mask &= ~mask; + + if (update_hw) { + xgsm_irq_mask_set(sinfo, sinfo->irq_mask); + } +} + +static inline void +dev_dma_chain_clear(bkn_switch_info_t *sinfo, int chan) +{ + if (DEV_HAS_CMICM(sinfo)) { + xgsm_dma_chain_clear(sinfo, chan); + } else { + xgs_dma_chain_clear(sinfo, chan); + } +} + +static inline void +dev_dma_desc_clear(bkn_switch_info_t *sinfo, int chan) +{ + if (DEV_HAS_CMICM(sinfo)) { + xgsm_dma_desc_clear(sinfo, chan); + } else { + xgs_dma_desc_clear(sinfo, chan); + } +} + +static int +dev_dma_chan_clear(bkn_switch_info_t *sinfo, int chan) +{ + if (DEV_HAS_CMICM(sinfo)) { + return xgsm_dma_chan_clear(sinfo, chan); + } + return xgs_dma_chan_clear(sinfo, chan); +} + +static void +dev_cdma_halt_set(bkn_switch_info_t *sinfo, int chan) +{ + if (DEV_HAS_CMICM(sinfo)) { + xgsm_cdma_halt_set(sinfo, chan); + } +} + +static int +dev_dma_chan_init(bkn_switch_info_t *sinfo, int chan, int dir) +{ + if (DEV_HAS_CMICM(sinfo)) { + return xgsm_dma_chan_init(sinfo, chan, dir); + } + return xgs_dma_chan_init(sinfo, chan, dir); +} + +static int +dev_dma_chan_start(bkn_switch_info_t *sinfo, int chan, dma_addr_t dcb) +{ + if (DEV_HAS_CMICM(sinfo)) { + return xgsm_dma_chan_start(sinfo, chan, dcb); + } + return xgs_dma_chan_start(sinfo, chan, dcb); +} + +static int +dev_dma_chan_abort(bkn_switch_info_t *sinfo, int chan, int polls) +{ + if (DEV_HAS_CMICM(sinfo)) { + return xgsm_dma_chan_abort(sinfo, chan, polls); + } + return xgs_dma_chan_abort(sinfo, chan, polls); +} + +static inline void +dev_irq_mask_set(bkn_switch_info_t *sinfo, uint32_t mask) +{ + if (DEV_HAS_CMICM(sinfo)) { + xgsm_irq_mask_set(sinfo, mask); + } else { + xgs_irq_mask_set(sinfo, mask); + } +} + +static inline void +dev_irq_mask_enable(bkn_switch_info_t *sinfo, int chan, int update_hw) +{ + if (DEV_HAS_CMICM(sinfo)) { + xgsm_irq_mask_enable(sinfo, chan, update_hw); + } else { + xgs_irq_mask_enable(sinfo, chan, update_hw); + } +} + +static void +dev_irq_mask_disable(bkn_switch_info_t *sinfo, int chan, int update_hw) +{ + if (DEV_HAS_CMICM(sinfo)) { + xgsm_irq_mask_disable(sinfo, chan, update_hw); + } else { + xgs_irq_mask_disable(sinfo, chan, update_hw); + } +} + + +static int +bkn_alloc_dcbs(bkn_switch_info_t *sinfo) +{ + int dcb_size; + int tx_ring_size, rx_ring_size; + + dcb_size = sinfo->dcb_wsize * sizeof(uint32_t); + tx_ring_size = dcb_size * (MAX_TX_DCBS + 1); + rx_ring_size = dcb_size * (MAX_RX_DCBS + 1); + sinfo->dcb_mem_size = tx_ring_size + rx_ring_size * NUM_RX_CHAN; + + sinfo->dcb_mem = DMA_ALLOC_COHERENT(sinfo->dma_dev, + sinfo->dcb_mem_size, + &sinfo->dcb_dma); + if (sinfo->dcb_mem == NULL) { + gprintk("DCB memory allocation (%d bytes) failed.\n", + sinfo->dcb_mem_size); + return -ENOMEM; + } + + return 0; +} + +static void +bkn_free_dcbs(bkn_switch_info_t *sinfo) +{ + if (sinfo->dcb_mem != NULL) { + DMA_FREE_COHERENT(sinfo->dma_dev, sinfo->dcb_mem_size, + sinfo->dcb_mem, sinfo->dcb_dma); + sinfo->dcb_mem = NULL; + } +} + +static void +bkn_clean_tx_dcbs(bkn_switch_info_t *sinfo) +{ + bkn_desc_info_t *desc; + + DBG_DCB_TX(("Cleaning Tx DCBs (%d %d).\n", + sinfo->tx.cur, sinfo->tx.dirty)); + while (sinfo->tx.free < MAX_TX_DCBS) { + desc = &sinfo->tx.desc[sinfo->tx.dirty]; + if (desc->skb != NULL) { + DBG_SKB(("Cleaning Tx SKB from DCB %d.\n", + sinfo->tx.dirty)); + DMA_UNMAP_SINGLE(sinfo->dma_dev, + desc->skb_dma, desc->dma_size, + DMA_TODEV); + desc->skb_dma = 0; + dev_kfree_skb_any(desc->skb); + desc->skb = NULL; + } + if (++sinfo->tx.dirty >= MAX_TX_DCBS) { + sinfo->tx.dirty = 0; + } + sinfo->tx.free++; + } + sinfo->tx.api_active = 0; + DBG_DCB_TX(("Cleaned Tx DCBs (%d %d).\n", + sinfo->tx.cur, sinfo->tx.dirty)); +} + +static void +bkn_clean_rx_dcbs(bkn_switch_info_t *sinfo, int chan) +{ + bkn_desc_info_t *desc; + + DBG_DCB_RX(("Cleaning Rx%d DCBs (%d %d).\n", + chan, sinfo->rx[chan].cur, sinfo->rx[chan].dirty)); + while (sinfo->rx[chan].free) { + desc = &sinfo->rx[chan].desc[sinfo->rx[chan].dirty]; + if (desc->skb != NULL) { + DBG_SKB(("Cleaning Rx%d SKB from DCB %d.\n", + chan, sinfo->rx[chan].dirty)); + DMA_UNMAP_SINGLE(sinfo->dma_dev, + desc->skb_dma, desc->dma_size, + DMA_FROMDEV); + desc->skb_dma = 0; + dev_kfree_skb_any(desc->skb); + desc->skb = NULL; + } + if (++sinfo->rx[chan].dirty >= MAX_RX_DCBS) { + sinfo->rx[chan].dirty = 0; + } + sinfo->rx[chan].free--; + } + sinfo->rx[chan].running = 0; + sinfo->rx[chan].api_active = 0; + DBG_DCB_RX(("Cleaned Rx%d DCBs (%d %d).\n", + chan, sinfo->rx[chan].cur, sinfo->rx[chan].dirty)); +} + +static void +bkn_clean_dcbs(bkn_switch_info_t *sinfo) +{ + int chan; + + bkn_clean_tx_dcbs(sinfo); + + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + bkn_clean_rx_dcbs(sinfo, chan); + } +} + +static void +bkn_init_dcbs(bkn_switch_info_t *sinfo) +{ + int dcb_size; + uint32_t *dcb_mem; + dma_addr_t dcb_dma; + bkn_desc_info_t *desc; + int idx; + int chan; + + memset(sinfo->dcb_mem, 0, sinfo->dcb_mem_size); + + dcb_size = sinfo->dcb_wsize * sizeof(uint32_t); + dcb_mem = sinfo->dcb_mem; + dcb_dma = sinfo->dcb_dma; + + for (idx = 0; idx < (MAX_TX_DCBS + 1); idx++) { + if (CDMA_CH(sinfo, XGS_DMA_TX_CHAN)) { + dcb_mem[1] |= (1 << 24) | (1 << 16); + if (idx == MAX_TX_DCBS) { + dcb_mem[1] |= 1 << 18; + dcb_mem[0] = sinfo->tx.desc[0].dcb_dma; + } + } + desc = &sinfo->tx.desc[idx]; + desc->dcb_mem = dcb_mem; + desc->dcb_dma = dcb_dma; + dcb_mem += sinfo->dcb_wsize; + dcb_dma += dcb_size; + } + sinfo->halt_addr[XGS_DMA_TX_CHAN] = sinfo->tx.desc[0].dcb_dma; + sinfo->tx.free = MAX_TX_DCBS; + + DBG_DCB_TX(("Tx DCBs @ 0x%08x.\n", + (uint32_t)sinfo->tx.desc[0].dcb_dma)); + + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + for (idx = 0; idx < (MAX_RX_DCBS + 1); idx++) { + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + dcb_mem[1] |= (1 << 24) | (1 << 16); + if (idx == MAX_RX_DCBS) { + dcb_mem[1] |= 1 << 18; + dcb_mem[0] = sinfo->rx[chan].desc[0].dcb_dma; + } + } + desc = &sinfo->rx[chan].desc[idx]; + desc->dcb_mem = dcb_mem; + desc->dcb_dma = dcb_dma; + dcb_mem += sinfo->dcb_wsize; + dcb_dma += dcb_size; + } + sinfo->halt_addr[XGS_DMA_RX_CHAN + chan] = sinfo->rx[chan].desc[MAX_RX_DCBS].dcb_dma; + sinfo->rx[chan].free = 0; + + DBG_DCB_RX(("Rx%d DCBs @ 0x%08x.\n", + chan, (uint32_t)sinfo->rx[chan].desc[0].dcb_dma)); + } +} + +static void +bkn_dump_dcb(char *prefix, uint32_t *dcb, int wsize, int txrx) +{ + if (XGS_DMA_TX_CHAN == txrx) { + DBG_DCB_TX(("%s: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x ... 0x%08x\n", + prefix, dcb[0], dcb[1], dcb[2], dcb[3], dcb[4], dcb[5], + dcb[wsize - 1])); + } else { + DBG_DCB_RX(("%s: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x ... 0x%08x\n", + prefix, dcb[0], dcb[1], dcb[2], dcb[3], dcb[4], dcb[5], + dcb[wsize - 1])); + } +} + +static void +bkn_dump_pkt(uint8_t *data, int size, int txrx) +{ + int idx; + char str[128]; + + if (!(debug & DBG_LVL_PDMP) && + !(txrx == XGS_DMA_TX_CHAN && debug & DBG_LVL_PDMP_TX) && + !(txrx == XGS_DMA_RX_CHAN && debug & DBG_LVL_PDMP_RX)) { + return; + } + size =32; + + for (idx = 0; idx < size; idx++) { + if ((idx & 0xf) == 0) { + sprintf(str, "%04x: ", idx); + } + if ((idx & 0xf) == 8) { + sprintf(&str[strlen(str)], "- "); + } + sprintf(&str[strlen(str)], "%02x ", data[idx]); + if ((idx & 0xf) == 0xf) { + sprintf(&str[strlen(str)], "\n"); + gprintk(str); + } + } + if ((idx & 0xf) != 0) { + sprintf(&str[strlen(str)], "\n"); + gprintk(str); + } +} + +static bkn_switch_info_t * +bkn_sinfo_from_unit(int unit) +{ + struct list_head *list; + bkn_switch_info_t *sinfo; + + list_for_each(list, &_sinfo_list) { + sinfo = (bkn_switch_info_t *)list; + if (sinfo->dev_no == unit || unit == -1) { + return sinfo; + } + } + return NULL; +} + +static void +bkn_api_rx_restart(bkn_switch_info_t *sinfo) +{ + bkn_dcb_chain_t *dcb_chain; + int chan = API_RX_CHAN; + int start_dma; + + if (sinfo->basedev_suspended) { + return; + } + + /* If resume from basedev suspended, there could be a suspended chain */ + if (sinfo->rx[chan].api_dcb_chain) { + return; + } + + /* Assume that driver lock is held */ + if (!list_empty(&sinfo->rx[chan].api_dcb_list)) { + dcb_chain = list_entry(sinfo->rx[chan].api_dcb_list.next, + bkn_dcb_chain_t, list); + start_dma = 0; + if (sinfo->rx[chan].use_rx_skb == 0) { + sinfo->rx[chan].chain_complete = 0; + start_dma = 1; + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan) && + sinfo->rx[chan].api_active) { + /* HW is running already, so we just move to the next chain */ + start_dma = 0; + } + } + sinfo->rx[chan].api_dcb_chain = dcb_chain; + sinfo->rx[chan].api_active = 1; + if (start_dma) { + DBG_DCB_RX(("Start API Rx DMA, first DCB @ 0x%08x (%d DCBs).\n", + (uint32_t)dcb_chain->dcb_dma, dcb_chain->dcb_cnt)); + dev_dma_chan_clear(sinfo, XGS_DMA_RX_CHAN + chan); + dev_irq_mask_enable(sinfo, XGS_DMA_RX_CHAN + chan, 1); + dev_dma_chan_start(sinfo, XGS_DMA_RX_CHAN + chan, + dcb_chain->dcb_dma); + } + + list_del(&dcb_chain->list); + } +} + +static void +bkn_api_rx_chain_done(bkn_switch_info_t *sinfo, int chan) +{ + DBG_DCB_RX(("API Rx DMA chain done\n")); + + if (!CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + sinfo->rx[chan].api_active = 0; + } + if (sinfo->rx[chan].api_dcb_chain) { + kfree(sinfo->rx[chan].api_dcb_chain); + sinfo->rx[chan].api_dcb_chain = NULL; + } + bkn_api_rx_restart(sinfo); + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan) && + sinfo->rx[chan].api_dcb_chain == NULL) { + sinfo->rx[chan].api_active = 0; + } +} + +static int +bkn_api_rx_copy_from_skb(bkn_switch_info_t *sinfo, + int chan, bkn_desc_info_t *desc) +{ + bkn_dcb_chain_t *dcb_chain; + uint32_t *dcb; + uint32_t dcb_stat; + uint8_t *pkt; + int pktlen; + int i; + bkn_evt_resource_t *evt; + + dcb_stat = desc->dcb_mem[sinfo->dcb_wsize-1]; + pktlen = dcb_stat & SOC_DCB_KNET_COUNT_MASK; + + dcb_chain = sinfo->rx[chan].api_dcb_chain; + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan) && dcb_chain == NULL) { + /* Last chain done, try to get a new one */ + bkn_api_rx_chain_done(sinfo, chan); + dcb_chain = sinfo->rx[chan].api_dcb_chain; + } + if (dcb_chain == NULL) { + DBG_WARN(("No Rx API buffers\n")); + sinfo->rx[chan].pkts_d_no_api_buf++; + return -1; + } + dcb = &dcb_chain->dcb_mem[dcb_chain->dcb_cur * sinfo->dcb_wsize]; + if (dcb[1] < pktlen) { + DBG_WARN(("Rx API buffer too small\n")); + return -1; + } + pkt = (uint8_t *)kernel_bde->p2l(sinfo->dev_no, dcb[0]); + if (pkt == NULL) { + DBG_WARN(("Invalid Rx API buffer\n")); + return -1; + } + + /* Copy packet data */ + memcpy(pkt, desc->skb->data, pktlen); + + /* Copy packet metadata and mark as done */ + for (i = SOC_DCB_META_OFFSET; i < sinfo->dcb_wsize; i++) { + dcb[i] = desc->dcb_mem[i]; + } + dcb[sinfo->dcb_wsize-1] = dcb_stat | SOC_DCB_KNET_DONE; + + dcb_chain->dcb_cur++; + + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + dcb = &dcb_chain->dcb_mem[dcb_chain->dcb_cur * sinfo->dcb_wsize]; + if (dcb[1] & (1 << 18)) { + /* Get the next chain if reload done */ + dcb[sinfo->dcb_wsize - 1] |= (1 << 31) | SOC_DCB_KNET_DONE; + bkn_api_rx_chain_done(sinfo, chan); + dcb_chain = sinfo->rx[chan].api_dcb_chain; + if (dcb_chain == NULL) { + sinfo->rx[chan].api_dcb_chain_end = NULL; + } + } + } else { + if ((dcb[1] & (1 << 16)) == 0) { + bkn_api_rx_chain_done(sinfo, chan); + } + } + + sinfo->dma_events |= KCOM_DMA_INFO_F_RX_DONE; + + evt = &_bkn_evt[sinfo->evt_idx]; + evt->evt_wq_put++; + wake_up_interruptible(&evt->evt_wq); + + return 0; +} + +static void +bkn_rx_refill(bkn_switch_info_t *sinfo, int chan) +{ + struct sk_buff *skb; + bkn_desc_info_t *desc; + uint32_t *dcb; + int prev; + + if (sinfo->rx[chan].use_rx_skb == 0) { + /* Rx buffers are provided by BCM Rx API */ + return; + } + + if (!CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan) && + sinfo->rx[chan].tokens < MAX_RX_DCBS) { + /* Pause DMA for now */ + return; + } + + while (sinfo->rx[chan].free < MAX_RX_DCBS) { + desc = &sinfo->rx[chan].desc[sinfo->rx[chan].cur]; + if (desc->skb == NULL) { + skb = dev_alloc_skb(rx_buffer_size + RCPU_RX_ENCAP_SIZE); + if (skb == NULL) { + break; + } + skb_reserve(skb, RCPU_RX_ENCAP_SIZE); + desc->skb = skb; + } else { + DBG_DCB_RX(("Refill Rx%d SKB in DCB %d recycled.\n", + chan, sinfo->rx[chan].cur)); + } + skb = desc->skb; + desc->dma_size = rx_buffer_size; +#ifdef KNET_NO_AXI_DMA_INVAL + /* + * FIXME: Need to retain this code until iProc customers have been + * migrated to updated u-boot. Old u-boot versions are unable to load + * the kernel into non-ACP memory. + */ + /* + * Cache invalidate may corrupt DMA memory on some iProc-based devices + * if the kernel is mapped to ACP memory. + */ + if (sinfo->pdev == NULL) { + desc->dma_size = 0; + } +#endif + desc->skb_dma = DMA_MAP_SINGLE(sinfo->dma_dev, + skb->data, desc->dma_size, + DMA_FROMDEV); + DBG_DCB_RX(("Refill Rx%d DCB %d (0x%08x).\n", + chan, sinfo->rx[chan].cur, (uint32_t)desc->skb_dma)); + dcb = desc->dcb_mem; + memset(dcb, 0, sizeof(uint32_t) * sinfo->dcb_wsize); + dcb[0] = desc->skb_dma; + dcb[1] = rx_buffer_size; + + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + dcb[1] |= (1 << 24) | (1 << 16); + } else { + prev = PREV_IDX(sinfo->rx[chan].cur, MAX_RX_DCBS); + if (prev < (MAX_RX_DCBS - 1)) { + sinfo->rx[chan].desc[prev].dcb_mem[1] |= (1 << 16); + } + } + if (++sinfo->rx[chan].cur >= MAX_RX_DCBS) { + sinfo->rx[chan].cur = 0; + } + sinfo->rx[chan].free++; + sinfo->rx[chan].tokens--; + } +} + +static int +bkn_rx_restart(bkn_switch_info_t *sinfo, int chan) +{ + bkn_desc_info_t *desc; + + if (sinfo->basedev_suspended) { + return 0; + } + + if (sinfo->rx[chan].running) { + return 0; + } + + if (sinfo->rx[chan].free < MAX_RX_DCBS) { + return 1; + } + + desc = &sinfo->rx[chan].desc[sinfo->rx[chan].dirty]; + sinfo->rx[chan].chain_complete = 0; + DBG_DCB_RX(("Restart Rx%d DMA, DCB @ 0x%08x (%d).\n", + chan, (uint32_t)desc->dcb_dma, sinfo->rx[chan].dirty)); + dev_dma_chan_clear(sinfo, XGS_DMA_RX_CHAN + chan); + dev_irq_mask_enable(sinfo, XGS_DMA_RX_CHAN + chan, 1); + dev_dma_chan_start(sinfo, XGS_DMA_RX_CHAN + chan, desc->dcb_dma); + sinfo->rx[chan].running = 1; + + /* Request one extra poll if chain was restarted during poll */ + if (sinfo->napi_poll_mode) { + sinfo->napi_poll_again = 1; + } + + return 0; +} + +static int +bkn_tx_dma_start(bkn_switch_info_t *sinfo) +{ + bkn_desc_info_t *desc; + + desc = &sinfo->tx.desc[sinfo->tx.cur]; + if (sinfo->tx.free == MAX_TX_DCBS) { + if (!sinfo->tx.api_active) { + DBG_DCB_TX(("Start Tx DMA, DCB @ 0x%08x (%d).\n", + (uint32_t)desc->dcb_dma, sinfo->tx.cur)); + dev_dma_chan_clear(sinfo, XGS_DMA_TX_CHAN); + dev_irq_mask_enable(sinfo, XGS_DMA_TX_CHAN, 1); + dev_dma_chan_start(sinfo, XGS_DMA_TX_CHAN, desc->dcb_dma); + } + } + + return 0; +} + +static int +bkn_dma_init(bkn_switch_info_t *sinfo) +{ + int chan; + + dev_dma_chan_init(sinfo, XGS_DMA_TX_CHAN, 1); + if (CDMA_CH(sinfo, XGS_DMA_TX_CHAN)) { + bkn_tx_dma_start(sinfo); + } + + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + dev_dma_chan_init(sinfo, XGS_DMA_RX_CHAN + chan, 0); + bkn_rx_refill(sinfo, chan); + bkn_rx_restart(sinfo, chan); + } + + return 0; +} + +static void +bkn_cdma_goto(bkn_switch_info_t *sinfo, int chan, dma_addr_t dcb) +{ + if (sinfo->basedev_suspended) { + return; + } + + /* Set the new halt location */ + sinfo->halt_addr[chan] = dcb; + dev_cdma_halt_set(sinfo, chan); +} + +static int +bkn_dma_abort_tx(bkn_switch_info_t *sinfo) +{ + bkn_dcb_chain_t *dcb_chain; + + DBG_VERB(("Aborting Tx DMA.\n")); + + dev_irq_mask_disable(sinfo, XGS_DMA_TX_CHAN, 1); + + dev_dma_chan_abort(sinfo, XGS_DMA_TX_CHAN, 10000); + + if (sinfo->tx.api_dcb_chain) { + DBG_DCB_TX(("Freeing active Tx DCB chain.\n")); + kfree(sinfo->tx.api_dcb_chain); + sinfo->tx.api_dcb_chain = NULL; + } + while (!list_empty(&sinfo->tx.api_dcb_list)) { + dcb_chain = list_entry(sinfo->tx.api_dcb_list.next, + bkn_dcb_chain_t, list); + list_del(&dcb_chain->list); + DBG_DCB_TX(("Freeing Tx DCB chain.\n")); + kfree(dcb_chain); + } + sinfo->tx.api_dcb_chain_end = NULL; + + return 0; +} + +static int +bkn_dma_abort_rx(bkn_switch_info_t *sinfo, int chan) +{ + bkn_dcb_chain_t *dcb_chain; + + DBG_VERB(("Aborting Rx%d DMA.\n", chan)); + + dev_irq_mask_disable(sinfo, XGS_DMA_RX_CHAN + chan, 1); + + dev_dma_chan_abort(sinfo, XGS_DMA_RX_CHAN + chan, 10000); + + if (sinfo->rx[chan].api_dcb_chain) { + DBG_DCB_RX(("Freeing active Rx%d DCB chain.\n", chan)); + kfree(sinfo->rx[chan].api_dcb_chain); + sinfo->rx[chan].api_dcb_chain = NULL; + } + while (!list_empty(&sinfo->rx[chan].api_dcb_list)) { + dcb_chain = list_entry(sinfo->rx[chan].api_dcb_list.next, + bkn_dcb_chain_t, list); + list_del(&dcb_chain->list); + DBG_DCB_RX(("Freeing Rx%d DCB chain.\n", chan)); + kfree(dcb_chain); + } + sinfo->rx[chan].api_dcb_chain_end = NULL; + + return 0; +} + +static int +bkn_dma_abort(bkn_switch_info_t *sinfo) +{ + int chan; + + bkn_dma_abort_tx(sinfo); + + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + bkn_dma_abort_rx(sinfo, chan); + } + + return 0; +} + +static bkn_filter_t * +bkn_match_rx_pkt(bkn_switch_info_t *sinfo, uint32_t *desc, + uint8_t *pkt, int chan, bkn_filter_t *cbf) +{ + struct list_head *list; + bkn_filter_t *filter; + kcom_filter_t scratch, *kf; + uint8_t *oob = (uint8_t *)desc; + int size, wsize; + int idx, match; + + list_for_each(list, &sinfo->rxpf_list) { + filter = (bkn_filter_t *)list; + kf = &filter->kf; + memcpy(&scratch.data.b[0], + &oob[kf->oob_data_offset], kf->oob_data_size); + memcpy(&scratch.data.b[kf->oob_data_size], + &pkt[kf->pkt_data_offset], kf->pkt_data_size); + size = kf->oob_data_size + kf->pkt_data_size; + wsize = BYTES2WORDS(size); + DBG_VERB(("Filter: size = %d (%d), data = 0x%08x, mask = 0x%08x\n", + size, wsize, kf->data.w[0], kf->mask.w[0])); + match = 1; + if (match) { + if (kf->priority < (num_rx_prio * NUM_RX_CHAN)) { + if (kf->priority < (num_rx_prio * chan) || + kf->priority >= (num_rx_prio * (chan + 1))) { + match = 0; + } + } + } + if (match) { + for (idx = 0; idx < wsize; idx++) { + scratch.data.w[idx] &= kf->mask.w[idx]; + if (scratch.data.w[idx] != kf->data.w[idx]) { + match = 0; + break; + } + } + } + if (match) { + if (kf->dest_type == KCOM_DEST_T_CB) { + /* Check for custom filters */ + if (knet_filter_cb != NULL && cbf != NULL) { + size = desc[sinfo->dcb_wsize-1] & SOC_DCB_KNET_COUNT_MASK; + memset(cbf, 0, sizeof(*cbf)); + memcpy(&cbf->kf, kf, sizeof(cbf->kf)); + if (knet_filter_cb(pkt, size, sinfo->dev_no, + desc, chan, &cbf->kf)) { + filter->hits++; + return cbf; + } + } else { + DBG_FLTR(("Match, but not filter callback\n")); + } + } else { + filter->hits++; + return filter; + } + } + } + + return NULL; +} + +static bkn_priv_t * +bkn_netif_lookup(bkn_switch_info_t *sinfo, int id) +{ + struct list_head *list; + bkn_priv_t *priv; + int found; + + /* Fast path */ + if (id < sinfo->ndev_max) { + if (sinfo->ndevs[id] != NULL) { + DBG_NDEV(("Look up netif ID %d successful\n", id)); + return netdev_priv(sinfo->ndevs[id]); + } + } + + /* Slow path - should normally not get here */ + found = 0; + priv = NULL; + list_for_each(list, &sinfo->ndev_list) { + priv = (bkn_priv_t *)list; + if (priv->id == id) { + found = 1; + break; + } + } + if (found && priv != NULL) { + return priv; + } + return NULL; +} + +static int +bkn_add_rcpu_encap(bkn_switch_info_t *sinfo, struct sk_buff *skb, uint32_t *dcb) +{ + int pktlen = skb->len; + uint32_t *metadata; + int idx; + + /* Add and clear RCPU encapsulation */ + skb_push(skb, RCPU_RX_ENCAP_SIZE); + memset(skb->data, 0, RCPU_RX_ENCAP_SIZE); + + /* RCPU Header */ + memcpy(skb->data, &skb->data[RCPU_RX_ENCAP_SIZE], 12); + if (rcpu_dmac != NULL) { + memcpy(skb->data, bkn_rcpu_dmac, 6); + } + if (rcpu_smac != NULL) { + memcpy(&skb->data[6], bkn_rcpu_smac, 6); + } + skb->data[12] = 0x81; + skb->data[14] = rcpu_vlan >> 8; + skb->data[15] = rcpu_vlan & 0xff; + skb->data[16] = rcpu_ethertype >> 8; + skb->data[17] = rcpu_ethertype & 0xff; + skb->data[18] = sinfo->rcpu_sig >> 8; + skb->data[19] = sinfo->rcpu_sig & 0xff; + skb->data[20] = RCPU_OPCODE_RX; + skb->data[21] = RCPU_F_MODHDR; + skb->data[24] = pktlen >> 8; + skb->data[25] = pktlen & 0xff; + + /* Meta data */ + metadata = (uint32_t *)&skb->data[RCPU_HDR_SIZE]; + for (idx = 0; idx < sinfo->dcb_wsize - 3; idx++) { + metadata[idx] = htonl(dcb[idx+2]); + } + + return 0; +} + +static void +bkn_eth_type_update(struct sk_buff *skb, int ethertype) +{ +#if defined(PM_ETH_TYPE) && defined(PM_FC_TYPE) + /* Optionally override standard protocol */ + skb->protocol = PM_ETH_TYPE; + if (ethertype == ETH_P_FCOE) { + skb->protocol = PM_FC_TYPE; + } +#endif +} + + + +#define BKN_DNX_BIT(x) (1<<(x)) +#define BKN_DNX_RBIT(x) (~(1<<(x))) +#ifdef __LITTLE_ENDIAN +#define BKN_DNX_BYTE_SWAP(x) (x) +#else +#define BKN_DNX_BYTE_SWAP(x) ((((x) << 24)) | (((x) & 0xff00) << 8) | (((x) & 0xff0000) >> 8) | (((x) >> 24))) +#endif +static int +device_is_dune(bkn_switch_info_t *sinfo) +{ + int is_dune = 0; + + is_dune = (sinfo->dcb_type == 28) ? 1 : 0; + return is_dune; +} +static int +packet_is_untagged(uint16_t tpid) +{ + int is_untagged = 0; + + /* Fixme SDK-111398 */ + /* 0x8100 is used in 802.1Q */ + /* 0x8848 is used in 802.11ad, the dtag tpid can be set to anything besides 0x8848, 0x9100 is a typical value, but couldn't cover all scenarios. */ + is_untagged = ((tpid != 0x8100) && (tpid != 0x8848) && (tpid != 0x9100)); + return is_untagged; +} + +static void +bkn_dnx_bitstream_set_field(uint32_t *input_buffer, uint32_t start_bit, uint32_t nof_bits, uint32_t field) +{ + uint32_t place; + uint32_t field_bit_i; + uint32_t bit_indicator; + + if( nof_bits > 32) + { + return; + } + + for( place=start_bit, field_bit_i = 0; field_bit_i< nof_bits; ++place, ++field_bit_i) + { + bit_indicator = field & BKN_DNX_BIT(nof_bits-field_bit_i-1); + if(bit_indicator) + { + input_buffer[place>>5] |= (0x80000000 >> (place & 0x0000001F)); + } + else + { + input_buffer[place>>5] &= ~(0x80000000 >> (place & 0x0000001F)); + } + } + return; +} + +static void +bkn_dnx_bitstream_get_field(uint8_t *input_buffer, uint32_t start_bit, uint32_t nof_bits, uint32_t *output_value) +{ + uint32_t idx; + uint32_t buf_sizes=0; + uint32_t tmp_output_value[2]={0}; + uint32_t first_byte_ndx; + uint32_t last_byte_ndx; + uint32_t place; + uint32_t field_bit_i; + uint8_t *tmp_output_value_u8_ptr = (uint8_t*)&tmp_output_value; + uint32_t bit_indicator; + + if (nof_bits > 32) + { + return; + } + + first_byte_ndx = start_bit / 8; + last_byte_ndx = ((start_bit + nof_bits - 1) / 8); + *output_value=0; + + /* get 32 bit value, MSB */ + for (idx = first_byte_ndx; idx <= last_byte_ndx; ++idx) + { + tmp_output_value_u8_ptr[last_byte_ndx - idx] = input_buffer[idx]; + buf_sizes += 8; + } + tmp_output_value[0] = BKN_DNX_BYTE_SWAP(tmp_output_value[0]); + if (last_byte_ndx > 4) + { + tmp_output_value[1] = BKN_DNX_BYTE_SWAP(tmp_output_value[1]); + } + + place = buf_sizes - (start_bit % 8 + nof_bits); + for (field_bit_i = 0; field_bit_i< nof_bits; ++place, ++field_bit_i) + { + uint32_t result; + result = tmp_output_value[place>>5] & BKN_DNX_BIT(place & 0x0000001F); + if (result) + { + bit_indicator = 1; + } else { + bit_indicator = 0; + } + *output_value |= bit_indicator << field_bit_i; + } + return; +} + +static void +bkn_dnx_packet_parse_ftmh(uint8_t hdr_buff[], bkn_dnx_packet_info *packet_info) +{ + uint32_t header_ptr = 0; + uint32_t dsp_ext_exist=0; + uint32_t fld_val; + + header_ptr = packet_info->ntwrk_header_ptr; + + /* Packet-size */ + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_FTMH_PKT_SIZE_MSB, + BKN_DNX_FTMH_PKT_SIZE_NOF_BITS, + &fld_val); + packet_info->ftmh.packet_size = fld_val; + /* Traffic-class */ + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_FTMH_TC_MSB, + BKN_DNX_FTMH_TC_NOF_BITS, + &fld_val); + packet_info->ftmh.prio = fld_val; + /* Source-system-port-aggregate */ + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_FTMH_SRC_SYS_PORT_MSB, + BKN_DNX_FTMH_SRC_SYS_PORT_NOF_BITS, + &fld_val); + packet_info->ftmh.src_sys_port = fld_val; + /* TM-action-type */ + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_FTMH_ACTION_TYPE_MSB, + BKN_DNX_FTMH_ACTION_TYPE_NOF_BITS, + &fld_val); + packet_info->ftmh.action_type = fld_val; + /* PPH-type */ + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_FTMH_PPH_TYPE_MSB, + BKN_DNX_FTMH_PPH_TYPE_NOF_BITS, + &fld_val); + packet_info->ftmh.pph_type = fld_val; + + packet_info->ntwrk_header_ptr += BKN_DNX_FTMH_SIZE_BYTE; + DBG_DUNE(("FTMH(%d) Packet-size %d Action-type %d PPH-type %d Source-system-port 0x%x Traffic-class %d\n", + packet_info->ntwrk_header_ptr, packet_info->ftmh.packet_size, packet_info->ftmh.action_type, + packet_info->ftmh.pph_type, packet_info->ftmh.src_sys_port, packet_info->ftmh.prio)); + + /* LB-Key ext */ + if (ftmh_lb_key_ext) + { + packet_info->ntwrk_header_ptr += BKN_DNX_FTMH_LB_EXT_SIZE_BYTE; + DBG_DUNE(("FTMH(%d) FTMH LB-Key Extension is present\n", packet_info->ntwrk_header_ptr)); + } + /* DSP ext*/ + fld_val = 0; + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_FTMH_EXT_DSP_EXIST_MSB, + BKN_DNX_FTMH_EXT_DSP_EXIST_NOF_BITS, + &dsp_ext_exist); + if (dsp_ext_exist) + { + packet_info->ntwrk_header_ptr += BKN_DNX_FTMH_DEST_EXT_SIZE_BYTE; + DBG_DUNE(("FTMH(%d) DSP Extension is present\n", packet_info->ntwrk_header_ptr)); + } + /* stacking ext */ + if (ftmh_stacking_ext) + { + packet_info->ntwrk_header_ptr += BKN_DNX_FTMH_STACKING_SIZE_BYTE; + DBG_DUNE(("FTMH(%d) FTMH Stacking Extension is present\n", packet_info->ntwrk_header_ptr)); + } + return; +} + +static void +bkn_dnx_packet_parse_internal(uint8_t hdr_buff[], bkn_dnx_packet_info *packet_info) +{ + uint32_t header_ptr = 0; + uint32_t fld_val; + uint32_t eei_extension_present = 0; + uint32_t learn_extension_present = 0; + uint32_t fhei_size = 0; + uint32_t forward_code; + uint8_t is_trapped = 0; + + header_ptr = packet_info->ntwrk_header_ptr; + + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_PPH_EEI_EXTENSION_PRESENT_MSB, + BKN_DNX_PPH_EEI_EXTENSION_PRESENT_NOF_BITS, + &eei_extension_present); + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_PPH_LEARN_EXENSION_PRESENT_MSB, + BKN_DNX_PPH_LEARN_EXENSION_PRESENT_NOF_BITS, + &learn_extension_present); + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_PPH_FHEI_SIZE_MSB, + BKN_DNX_PPH_FHEI_SIZE_NOF_BITS, + &fhei_size); + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_PPH_FORWARD_CODE_MSB, + BKN_DNX_PPH_FORWARD_CODE_NOF_BITS, + &forward_code); + /* 7: CPU-Trap */ + is_trapped = (uint8_t)(forward_code == 7); + + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_PPH_VSI_MSB, + BKN_DNX_PPH_VSI_NOF_BITS, + &fld_val); + packet_info->internal.vsi = fld_val; + + /* size of PPH base is 7 */ + packet_info->ntwrk_header_ptr += BKN_DNX_PPH_SIZE_BYTE; + header_ptr = packet_info->ntwrk_header_ptr; + + DBG_DUNE(("PPH(%d) Forward-Code %d EEI-Extension %d Learn-Extension %d VSI %d FHEI-size %d\n", packet_info->ntwrk_header_ptr, + forward_code, eei_extension_present, learn_extension_present, packet_info->internal.vsi, fhei_size)); + + /* PPH extension */ + if (is_trapped && (fhei_size == 1)) + { + /* CPU trap code qualifier */ + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_PPH_FHEI_TRAP_SNOOP_3B_CPU_TRAP_CODE_QUALIFIER_MSB, + BKN_DNX_PPH_FHEI_TRAP_SNOOP_3B_CPU_TRAP_CODE_QUALIFIER_NOF_BITS, + &fld_val); + packet_info->internal.trap_qualifier = fld_val; + /* CPU trap code */ + bkn_dnx_bitstream_get_field( + &hdr_buff[header_ptr], + BKN_DNX_PPH_FHEI_TRAP_SNOOP_3B_CPU_TRAP_CODE_MSB, + BKN_DNX_PPH_FHEI_TRAP_SNOOP_3B_CPU_TRAP_CODE_NOF_BITS, + &fld_val); + packet_info->internal.trap_id = fld_val; + } + switch(fhei_size) { + case 1: + packet_info->ntwrk_header_ptr += BKN_DNX_PPH_FHEI_3B_SIZE_BYTE; + break; + case 2: + packet_info->ntwrk_header_ptr += BKN_DNX_PPH_FHEI_5B_SIZE_BYTE; + break; + case 3: + packet_info->ntwrk_header_ptr += BKN_DNX_PPH_FHEI_8B_SIZE_BYTE; + break; + default: + break; + } + if (eei_extension_present) { + packet_info->ntwrk_header_ptr += BKN_DNX_PPH_EXPLICIT_EDITING_INFOMATION_EXTENSION_SIZE_BYTE; + } + if (learn_extension_present) { + packet_info->ntwrk_header_ptr += BKN_DNX_PPH_LEARN_EXTENSION_SIZE_BYTE; + } + + DBG_DUNE(("FHEI(%d) trap_qualifier 0x%x trap_id 0x%x\n", packet_info->ntwrk_header_ptr, packet_info->internal.trap_qualifier, packet_info->internal.trap_id)); + return; +} + +static int +bkn_dnx_packet_header_parse(uint8 *buff, uint32_t buff_len, bkn_dnx_packet_info *packet_info) +{ + uint8_t hdr_buff[BKN_DNX_HDR_MAX_SIZE]; + uint32_t hdr_size; + uint8_t has_internal = 0; + + if ((buff == NULL) || (packet_info == NULL)) { + return -1; + } + hdr_size = buff_len < BKN_DNX_HDR_MAX_SIZE ? buff_len: BKN_DNX_HDR_MAX_SIZE; + memcpy(hdr_buff, buff, hdr_size); + + /* FTMH */ + bkn_dnx_packet_parse_ftmh(hdr_buff, packet_info); + if (packet_info->ftmh.packet_size != (buff_len + 2)) { + DBG_DUNE(("FTMH packet size verfication failed, %d-%d\n", packet_info->ftmh.packet_size, buff_len)); + memset(packet_info, 0, sizeof(bkn_dnx_packet_info)); + return -1; + } + switch (packet_info->ftmh.pph_type) { + case 0: + has_internal = 0; + break; + case 1: + has_internal = 1; + break; + case 2: /* PPH OAM-TS only */ + case 3: /* PPH Base + OAM-TS */ + /* OTSH immediately follows the FTMH when present */ + packet_info->ntwrk_header_ptr += 6; + DBG_DUNE(("FTMH + OAM-TS(%d)\n", packet_info->ntwrk_header_ptr)); + has_internal = 1; + break; + default: + break; + } + + if (has_internal) { + bkn_dnx_packet_parse_internal(&hdr_buff[0], packet_info); + } + + /* FIXME: */ + /* ignore packets with a double set of FTMH,internals */ + /* ignore the user header size */ + return 0; +} + +static int +bkn_do_api_rx(bkn_switch_info_t *sinfo, int chan, int budget) +{ + bkn_priv_t *priv; + bkn_dcb_chain_t *dcb_chain; + struct sk_buff *skb; + bkn_filter_t cbf; + bkn_filter_t *filter; + uint32_t *dcb; + uint8_t *pkt; + int ethertype; + int pktlen; + int drop_api; + int idx; + int dcbs_done; + bkn_dnx_packet_info packet_info = {0}; + dcbs_done = 0; + + dcb_chain = sinfo->rx[chan].api_dcb_chain; + if (dcb_chain == NULL) { + /* No active chains */ + return 0; + } + + while (dcb_chain->dcb_cur < dcb_chain->dcb_cnt) { + dcb = &dcb_chain->dcb_mem[dcb_chain->dcb_cur * sinfo->dcb_wsize]; + DBG_VERB(("DCB %2d: 0x%08x\n", + dcb_chain->dcb_cur, dcb[sinfo->dcb_wsize-1])); + if ((dcb[sinfo->dcb_wsize-1] & (1 << 31)) == 0) { + break; + } + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + /* Handle for Continuous DMA mode */ + if (dcbs_done >= budget) { + break; + } + if (dcb[1] & (1 << 18)) { + dcb[sinfo->dcb_wsize - 1] |= SOC_DCB_KNET_DONE; + bkn_api_rx_chain_done(sinfo, chan); + dcb_chain = sinfo->rx[chan].api_dcb_chain; + if (dcb_chain == NULL) { + break; + } + continue; + } + } + if ((dcb[1] & (1 << 16)) == 0) { + sinfo->rx[chan].chain_complete = 1; + } + sinfo->rx[chan].pkts++; + pkt = (uint8_t *)kernel_bde->p2l(sinfo->dev_no, dcb[0]); + pktlen = dcb[sinfo->dcb_wsize-1] & SOC_DCB_KNET_COUNT_MASK; + bkn_dump_pkt(pkt, 32, XGS_DMA_RX_CHAN); + + if (device_is_dune(sinfo)) { + uint16_t tpid = 0; + uint16_t vid = 0; + int res = -1; + + memset(&packet_info, 0, sizeof(bkn_dnx_packet_info)); + res = bkn_dnx_packet_header_parse(pkt, (uint32_t)pktlen, &packet_info); + if (res == 0) { + if (packet_info.ftmh.action_type == 0x2) { + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 192, 32, 0x8); + } else if (packet_info.ftmh.action_type == 0x1) { + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 231, 25, 0x20); + } + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 112, 16, packet_info.ftmh.src_sys_port); + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 296, 12, packet_info.internal.vsi); + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 64, 32, (packet_info.internal.trap_id << 16 | packet_info.internal.trap_qualifier)); + pkt += packet_info.ntwrk_header_ptr; + pktlen -= packet_info.ntwrk_header_ptr; + bkn_dump_pkt(pkt, 32, XGS_DMA_RX_CHAN); + /* check if vlan tag exists */ + tpid = (uint16_t)((pkt[12] << 8) | pkt[13]); + vid = (uint16_t)(packet_info.internal.vsi & 0xfff); + if (packet_is_untagged(tpid)) { + if ((pktlen + 4) < rx_buffer_size) { + DBG_DUNE(("add vlan tag (%d) to untagged packets\n", vid)); + for (idx = (pktlen-1); idx >= 12; idx--) { + pkt[idx+4] = pkt[idx]; + } + pkt[12] = 0x81; + pkt[13] = 0x00; + pkt[14] = (vid >> 8); + pkt[15] = (vid & 0xff); + /* reset packet length in DCB */ + pktlen += 4; + dcb[sinfo->dcb_wsize-1] &= ~SOC_DCB_KNET_COUNT_MASK; + dcb[sinfo->dcb_wsize-1] |= ((pktlen + packet_info.ntwrk_header_ptr) & SOC_DCB_KNET_COUNT_MASK); + bkn_dump_pkt(pkt, 32, XGS_DMA_RX_CHAN); + } + } + } + } + filter = bkn_match_rx_pkt(sinfo, dcb, pkt, chan, &cbf); + if ((dcb[sinfo->dcb_wsize-1] & 0x70000) != 0x30000) { + /* Fragment or error */ + if (filter && filter->kf.mask.w[sinfo->dcb_wsize-1] == 0) { + /* Drop unless DCB status is part of filter */ + filter = NULL; + } + } + drop_api = 1; + if (filter) { + DBG_FLTR(("Match filter ID %d\n", filter->kf.id)); + switch (filter->kf.dest_type) { + case KCOM_DEST_T_API: + DBG_FLTR(("Send to Rx API\n")); + sinfo->rx[chan].pkts_f_api++; + drop_api = 0; + break; + case KCOM_DEST_T_NETIF: + priv = bkn_netif_lookup(sinfo, filter->kf.dest_id); + if (priv) { + /* Check that software link is up */ + if (!netif_carrier_ok(priv->dev)) { + sinfo->rx[chan].pkts_d_no_link++; + break; + } + + /* Add 2 bytes for IP header alignment (see below) */ + skb = dev_alloc_skb(pktlen + RCPU_RX_ENCAP_SIZE + 2); + if (skb == NULL) { + sinfo->rx[chan].pkts_d_no_skb++; + break; + } + skb_reserve(skb, RCPU_RX_ENCAP_SIZE); + + DBG_FLTR(("Send to netif %d (%s)\n", + priv->id, priv->dev->name)); + sinfo->rx[chan].pkts_f_netif++; + skb->dev = priv->dev; + skb_reserve(skb, 2); /* 16 byte align the IP fields. */ + + /* Save for RCPU before stripping tag */ + ethertype = (pkt[16] << 8) | pkt[17]; + if ((priv->flags & KCOM_NETIF_F_KEEP_RX_TAG) == 0) { + if (filter->kf.flags & KCOM_FILTER_F_STRIP_TAG) { + /* Strip the VLAN tag */ + uint16_t vlan_proto = (uint16_t)((pkt[12] << 8) | pkt[13]); + if (vlan_proto == 0x8100 || vlan_proto == 0x88a8) { + DBG_FLTR(("Strip VLAN tag\n")); + for (idx = 11; idx >= 0; idx--) { + pkt[idx+4] = pkt[idx]; + } + pktlen -= 4; + pkt += 4; + } + } + } + + skb_copy_to_linear_data(skb, pkt, pktlen); + if (device_is_dune(sinfo)) { + /* CRC has been stripped */ + skb_put(skb, pktlen); + } else { + skb_put(skb, pktlen - 4); /* Strip CRC */ + } + priv->stats.rx_packets++; + priv->stats.rx_bytes += pktlen; + + /* Optional SKB updates */ + if (knet_rx_cb != NULL) { + KNET_SKB_CB(skb)->netif_user_data = priv->cb_user_data; + KNET_SKB_CB(skb)->filter_user_data = filter->kf.cb_user_data; + KNET_SKB_CB(skb)->dcb_type = sinfo->dcb_type & 0xFFFF; + skb = knet_rx_cb(skb, sinfo->dev_no, dcb); + if (skb == NULL) { + /* Consumed by call-back */ + sinfo->rx[chan].pkts_d_callback++; + break; + } + } + + if (priv->flags & KCOM_NETIF_F_RCPU_ENCAP) { + bkn_add_rcpu_encap(sinfo, skb, dcb); + } + skb->protocol = eth_type_trans(skb, skb->dev); + if (filter->kf.dest_proto) { + skb->protocol = filter->kf.dest_proto; + } + if (priv->flags & KCOM_NETIF_F_RCPU_ENCAP) { + bkn_eth_type_update(skb, ethertype); + } + DBG_DUNE(("skb protocol 0x%04x\n",skb->protocol)); + + /* Unlock while calling up network stack */ + spin_unlock(&sinfo->lock); + if (use_napi) { + netif_receive_skb(skb); + } else { + netif_rx(skb); + } + spin_lock(&sinfo->lock); + + if (filter->kf.mirror_type == KCOM_DEST_T_API || + dbg_pkt_enable) { + DBG_FLTR(("Mirror to Rx API\n")); + sinfo->rx[chan].pkts_m_api++; + drop_api = 0; + } + } else { + DBG_FLTR(("Unknown netif %d\n", + filter->kf.dest_id)); + sinfo->rx[chan].pkts_d_unkn_netif++; + } + break; + default: + /* Drop packet */ + DBG_FLTR(("Unknown dest type %d\n", + filter->kf.dest_type)); + sinfo->rx[chan].pkts_d_unkn_dest++; + break; + } + } + if (drop_api) { + /* If count is zero, the DCB will just be recycled */ + dcb[sinfo->dcb_wsize-1] &= ~SOC_DCB_KNET_COUNT_MASK; + } + dcb[sinfo->dcb_wsize-1] |= SOC_DCB_KNET_DONE; + dcb_chain->dcb_cur++; + dcbs_done++; + } + + return dcbs_done; +} + +static int +bkn_do_skb_rx(bkn_switch_info_t *sinfo, int chan, int budget) +{ + bkn_priv_t *priv; + bkn_desc_info_t *desc; + struct sk_buff *skb; + bkn_filter_t cbf; + bkn_filter_t *filter; + uint32_t *dcb; + int ethertype; + int dcbs_done; + int pktlen; + bkn_dnx_packet_info packet_info = {0}; + int idx; + + dcbs_done = 0; + + if (!sinfo->rx[chan].running) { + /* Rx not ready */ + return 0; + } + + while (dcbs_done < budget) { + char str[32]; + sprintf(str, "Rx DCB (%d)", sinfo->rx[chan].dirty); + desc = &sinfo->rx[chan].desc[sinfo->rx[chan].dirty]; + dcb = desc->dcb_mem; + bkn_dump_dcb(str, dcb, sinfo->dcb_wsize, XGS_DMA_RX_CHAN); + if ((dcb[sinfo->dcb_wsize-1] & (1 << 31)) == 0) { + break; + } + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + /* DMA run to the new halt location */ + bkn_cdma_goto(sinfo, XGS_DMA_RX_CHAN + chan, desc->dcb_dma); + } + if ((dcb[1] & (1 << 16)) == 0) { + sinfo->rx[chan].chain_complete = 1; + /* Request one extra poll to check for chain done interrupt */ + if (sinfo->napi_poll_mode) { + sinfo->napi_poll_again = 1; + } + } + sinfo->rx[chan].pkts++; + pktlen = dcb[sinfo->dcb_wsize-1] & 0xffff; + priv = netdev_priv(sinfo->dev); + skb = desc->skb; + DBG_DCB_RX(("Rx%d SKB DMA done (%d).\n", chan, sinfo->rx[chan].dirty)); + DMA_UNMAP_SINGLE(sinfo->dma_dev, + desc->skb_dma, desc->dma_size, + DMA_FROMDEV); + desc->skb_dma = 0; + bkn_dump_pkt(skb->data, 32, XGS_DMA_RX_CHAN); + if (device_is_dune(sinfo)) { + uint16_t tpid = 0; + uint16_t vid = 0; + uint8_t *pkt = skb->data; + int res = 0; + + memset(&packet_info, 0, sizeof(bkn_dnx_packet_info)); + res = bkn_dnx_packet_header_parse(pkt, (uint32_t)pktlen, &packet_info); + if (res == 0) { + if (packet_info.ftmh.action_type == 0x2) { + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 192, 32, 0x8); + } else if (packet_info.ftmh.action_type == 0x1) { + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 231, 25, 0x20); + } + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 112, 16, packet_info.ftmh.src_sys_port); + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 296, 12, packet_info.internal.vsi); + bkn_dnx_bitstream_set_field((uint32_t *)dcb, 64, 32, (packet_info.internal.trap_id << 16 | packet_info.internal.trap_qualifier)); + pkt = skb->data + packet_info.ntwrk_header_ptr; + /* check if vlan tag exists */ + tpid = (uint16_t)((pkt[12] << 8) | pkt[13]); + vid = (uint16_t)(packet_info.internal.vsi & 0xfff); + if (packet_is_untagged(tpid)) { + if ((pktlen + 4) < rx_buffer_size) { + DBG_DUNE(("add vlan tag to untagged packets\n")); + for (idx = (pktlen-packet_info.ntwrk_header_ptr-1); idx >= 12; idx--) { + pkt[idx+4] = pkt[idx]; + } + pkt[12] = 0x81; + pkt[13] = 0x00; + pkt[14] = (vid >> 8); + pkt[15] = (vid & 0xff); + pktlen += 4; + /* reset packet length in DCB */ + dcb[sinfo->dcb_wsize-1] &= ~SOC_DCB_KNET_COUNT_MASK; + dcb[sinfo->dcb_wsize-1] |= (pktlen & SOC_DCB_KNET_COUNT_MASK); + bkn_dump_pkt(pkt, 32, XGS_DMA_RX_CHAN); + } + } + } + } + if (device_is_dune(sinfo)) { + filter = bkn_match_rx_pkt(sinfo, dcb, (skb->data + packet_info.ntwrk_header_ptr), chan, &cbf); + } else { + filter = bkn_match_rx_pkt(sinfo, dcb, skb->data, chan, &cbf); + } + if ((dcb[sinfo->dcb_wsize-1] & 0x70000) == 0x30000) { + DBG_PKT(("Rx packet (%d bytes).\n", pktlen)); + } else { + /* Fragment or error */ + priv->stats.rx_errors++; + if (filter && filter->kf.mask.w[sinfo->dcb_wsize-1] == 0) { + /* Drop unless DCB status is part of filter */ + filter = NULL; + } + } + if (filter) { + DBG_FLTR(("Match filter ID %d\n", filter->kf.id)); + switch (filter->kf.dest_type) { + case KCOM_DEST_T_API: + DBG_FLTR(("Send to Rx API\n")); + sinfo->rx[chan].pkts_f_api++; + bkn_api_rx_copy_from_skb(sinfo, chan, desc); + break; + case KCOM_DEST_T_NETIF: + priv = bkn_netif_lookup(sinfo, filter->kf.dest_id); + if (priv) { + /* Check that software link is up */ + if (!netif_carrier_ok(priv->dev)) { + sinfo->rx[chan].pkts_d_no_link++; + break; + } + DBG_FLTR(("Send to netif %d (%s)\n", + priv->id, priv->dev->name)); + sinfo->rx[chan].pkts_f_netif++; + + if (device_is_dune(sinfo)) { + if (filter->kf.mirror_type == KCOM_DEST_T_API) { + sinfo->rx[chan].pkts_m_api++; + bkn_api_rx_copy_from_skb(sinfo, chan, desc); + } + /* Strip Dune headers */ + skb->data += packet_info.ntwrk_header_ptr; + pktlen -= packet_info.ntwrk_header_ptr; + bkn_dump_pkt(skb->data, 32, XGS_DMA_RX_CHAN); + /* CRC has been stripped on Dune*/ + skb_put(skb, pktlen); + } else { + skb_put(skb, pktlen - 4); /* Strip CRC */ + } + + /* Save for RCPU before stripping tag */ + ethertype = (skb->data[16] << 8) | skb->data[17]; + + if ((priv->flags & KCOM_NETIF_F_KEEP_RX_TAG) == 0) { + if (filter->kf.flags & KCOM_FILTER_F_STRIP_TAG) { + /* Strip VLAN tag */ + uint16_t vlan_proto = (uint16_t)((skb->data[12] << 8) | skb->data[13]); + if (vlan_proto == 0x8100 || vlan_proto == 0x88a8) { + DBG_FLTR(("Strip VLAN tag\n")); + ((u32*)skb->data)[3] = ((u32*)skb->data)[2]; + ((u32*)skb->data)[2] = ((u32*)skb->data)[1]; + ((u32*)skb->data)[1] = ((u32*)skb->data)[0]; + skb_pull(skb, 4); + pktlen -= 4; + } + } + } + priv->stats.rx_packets++; + priv->stats.rx_bytes += pktlen; + skb->dev = priv->dev; + + /* Optional SKB updates */ + if (knet_rx_cb != NULL) { + KNET_SKB_CB(skb)->netif_user_data = priv->cb_user_data; + KNET_SKB_CB(skb)->filter_user_data = filter->kf.cb_user_data; + KNET_SKB_CB(skb)->dcb_type = sinfo->dcb_type & 0xFFFF; + skb = knet_rx_cb(skb, sinfo->dev_no, dcb); + if (skb == NULL) { + /* Consumed by call-back */ + sinfo->rx[chan].pkts_d_callback++; + priv->stats.rx_dropped++; + desc->skb = NULL; + desc->skb_dma = 0; + break; + } + } + + if (((filter->kf.mirror_type == KCOM_DEST_T_API) && + (!device_is_dune(sinfo))) || dbg_pkt_enable) { + sinfo->rx[chan].pkts_m_api++; + bkn_api_rx_copy_from_skb(sinfo, chan, desc); + } + + if (priv->flags & KCOM_NETIF_F_RCPU_ENCAP) { + bkn_add_rcpu_encap(sinfo, skb, dcb); + } + skb->protocol = eth_type_trans(skb, skb->dev); + if (filter->kf.dest_proto) { + skb->protocol = filter->kf.dest_proto; + } + if (priv->flags & KCOM_NETIF_F_RCPU_ENCAP) { + bkn_eth_type_update(skb, ethertype); + } + DBG_DUNE(("skb protocol 0x%04x\n",skb->protocol)); + if (filter->kf.mirror_type == KCOM_DEST_T_NETIF) { + bkn_priv_t *mpriv; + struct sk_buff *mskb; + mpriv = bkn_netif_lookup(sinfo, filter->kf.mirror_id); + if (mpriv && netif_carrier_ok(mpriv->dev)) { + mskb = skb_clone(skb, GFP_ATOMIC); + if (mskb == NULL) { + sinfo->rx[chan].pkts_d_no_skb++; + } else { + sinfo->rx[chan].pkts_m_netif++; + mpriv->stats.rx_packets++; + mpriv->stats.rx_bytes += pktlen; + skb->dev = mpriv->dev; + if (filter->kf.mirror_proto) { + skb->protocol = filter->kf.mirror_proto; + } + /* Unlock while calling up network stack */ + spin_unlock(&sinfo->lock); + if (use_napi) { + netif_receive_skb(mskb); + } else { + netif_rx(mskb); + } + spin_lock(&sinfo->lock); + } + } + } + + /* Unlock while calling up network stack */ + spin_unlock(&sinfo->lock); + if (use_napi) { + netif_receive_skb(skb); + } else { + netif_rx(skb); + } + spin_lock(&sinfo->lock); + + /* Ensure that we reallocate SKB for this DCB */ + desc->skb = NULL; + desc->skb_dma = 0; + } else { + DBG_FLTR(("Unknown netif %d\n", + filter->kf.dest_id)); + sinfo->rx[chan].pkts_d_unkn_netif++; + } + } + } else { + DBG_PKT(("Rx packet dropped.\n")); + sinfo->rx[chan].pkts_d_no_match++; + priv->stats.rx_dropped++; + } + dcb[sinfo->dcb_wsize-1] = 0; + if (++sinfo->rx[chan].dirty >= MAX_RX_DCBS) { + sinfo->rx[chan].dirty = 0; + } + sinfo->rx[chan].free--; + dcbs_done++; + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + /* Right now refill for Continuous DMA mode */ + bkn_rx_refill(sinfo, chan); + if (sinfo->rx[chan].tokens < MAX_RX_DCBS) { + break; + } + } + } + + return dcbs_done; +} + +static int +bkn_do_rx(bkn_switch_info_t *sinfo, int chan, int budget) +{ + if (sinfo->rx[chan].use_rx_skb == 0) { + /* Rx buffers are provided by BCM Rx API */ + return bkn_do_api_rx(sinfo, chan, budget); + } else { + /* Rx buffers are provided by Linux kernel */ + return bkn_do_skb_rx(sinfo, chan, budget); + } +} + +static void +bkn_rx_desc_done(bkn_switch_info_t *sinfo, int chan) +{ + bkn_evt_resource_t *evt; + evt = &_bkn_evt[sinfo->evt_idx]; + DBG_IRQ(("Rx%d desc done\n", chan)); + + if (sinfo->rx[chan].use_rx_skb == 0) { + sinfo->dma_events |= KCOM_DMA_INFO_F_RX_DONE; + evt->evt_wq_put++; + wake_up_interruptible(&evt->evt_wq); + } +} + +static void +bkn_rx_chain_done(bkn_switch_info_t *sinfo, int chan) +{ + DBG_IRQ(("Rx%d chain done\n", chan)); + + if (sinfo->rx[chan].chain_complete == 0) { + /* + * In certain environments the DCB memory is updated after + * the corresponding interrupt has been received. + * The following code will ensure that this situation is + * handled properly. + */ + int maxloop = 0; + while (sinfo->rx[chan].chain_complete == 0) { + sinfo->rx[chan].sync_retry++; + if (maxloop == 0) { + sinfo->rx[chan].sync_err++; + } + if (maxloop > sinfo->rx[chan].sync_maxloop) { + sinfo->rx[chan].sync_maxloop = maxloop; + } + if (bkn_do_rx(sinfo, chan, MAX_RX_DCBS) > 0) { + bkn_rx_desc_done(sinfo, chan); + } + if (++maxloop > rx_sync_retry) { + gprintk("Fatal error: Incomplete chain\n"); + sinfo->rx[chan].chain_complete = 1; + break; + } + } + } + + sinfo->rx[chan].running = 0; + + if (sinfo->rx[chan].use_rx_skb == 0) { + bkn_api_rx_chain_done(sinfo, chan); + } else { + bkn_rx_refill(sinfo, chan); + + if (bkn_rx_restart(sinfo, chan) != 0) { + /* Presumably out of resources */ + sinfo->timer.expires = jiffies + 1; + if (!sinfo->timer_queued) { + sinfo->timer_queued = 1; + add_timer(&sinfo->timer); + } + } + } +} + +static void +bkn_suspend_tx(bkn_switch_info_t *sinfo) +{ + struct list_head *list; + bkn_priv_t *priv = netdev_priv(sinfo->dev); + + /* Stop main device */ + netif_stop_queue(priv->dev); + sinfo->tx.suspends++; + /* Stop associated virtual devices */ + list_for_each(list, &sinfo->ndev_list) { + priv = (bkn_priv_t *)list; + netif_stop_queue(priv->dev); + } +} + +static void +bkn_resume_tx(bkn_switch_info_t *sinfo) +{ + struct list_head *list; + bkn_priv_t *priv = netdev_priv(sinfo->dev); + + /* Check main device */ + if (netif_queue_stopped(priv->dev) && sinfo->tx.free > 1) { + netif_wake_queue(priv->dev); + } + /* Check associated virtual devices */ + list_for_each(list, &sinfo->ndev_list) { + priv = (bkn_priv_t *)list; + if (netif_queue_stopped(priv->dev) && sinfo->tx.free > 1) { + netif_wake_queue(priv->dev); + } + } +} + +static int +bkn_do_tx(bkn_switch_info_t *sinfo) +{ + bkn_desc_info_t *desc; + int dcbs_done = 0; + + if (!CDMA_CH(sinfo, XGS_DMA_TX_CHAN) && sinfo->tx.api_active) { + return dcbs_done; + } + + while (dcbs_done < MAX_TX_DCBS) { + char str[32]; + if (sinfo->tx.free == MAX_TX_DCBS) { + break; + } + sprintf(str, "Tx DCB (%d)", sinfo->tx.dirty); + desc = &sinfo->tx.desc[sinfo->tx.dirty]; + bkn_dump_dcb(str, desc->dcb_mem, sinfo->dcb_wsize, XGS_DMA_TX_CHAN); + if ((desc->dcb_mem[sinfo->dcb_wsize-1] & (1 << 31)) == 0) { + break; + } + if (desc->skb) { + DBG_DCB_TX(("Tx SKB DMA done (%d).\n", sinfo->tx.dirty)); + DMA_UNMAP_SINGLE(sinfo->dma_dev, + desc->skb_dma, desc->dma_size, + DMA_TODEV); + dev_kfree_skb_any(desc->skb); + desc->skb = NULL; + desc->skb_dma = 0; + } + desc->dcb_mem[sinfo->dcb_wsize-1] = 0; + if (++sinfo->tx.dirty >= MAX_TX_DCBS) { + sinfo->tx.dirty = 0; + } + if (++sinfo->tx.free > MAX_TX_DCBS) { + gprintk("Too many free Tx DCBs(%d).\n", sinfo->tx.free); + } + dcbs_done++; + } + + return dcbs_done; +} + +static void +bkn_tx_cdma_chain_switch(bkn_switch_info_t *sinfo) +{ + bkn_dcb_chain_t *dcb_chain = sinfo->tx.api_dcb_chain; + uint32_t *dcb_mem; + dma_addr_t dcb_dma; + int woffset; + + /* Switch between SKB Tx and API Tx for Continuous DMA mode */ + if (!sinfo->tx.api_active) { + /* + * Set the current SKB DCB as reload DCB and the last DCB of + * the pending API chain as the new halt location. + */ + sinfo->tx.api_active = 1; + dcb_mem = sinfo->tx.desc[sinfo->tx.cur].dcb_mem; + memset(dcb_mem, 0, sinfo->dcb_wsize * sizeof(uint32_t)); + dcb_mem[0] = dcb_chain->dcb_dma; + dcb_mem[1] |= (1 << 24) | (1 << 18) | (1 << 16); + if (++sinfo->tx.cur >= MAX_TX_DCBS) { + sinfo->tx.cur = 0; + } + sinfo->tx.free--; + woffset = (dcb_chain->dcb_cnt - 1) * sinfo->dcb_wsize; + dcb_dma = dcb_chain->dcb_dma + woffset * sizeof(uint32_t); + /* DMA run to the new halt location */ + bkn_cdma_goto(sinfo, XGS_DMA_TX_CHAN, dcb_dma); + } else { + /* Only need to set the current SKB DCB as the new halt location */ + sinfo->tx.api_active = 0; + woffset = (dcb_chain->dcb_cnt - 1) * sinfo->dcb_wsize; + dcb_mem = &dcb_chain->dcb_mem[woffset]; + dcb_mem[0] = sinfo->tx.desc[sinfo->tx.dirty].dcb_dma; + dcb_dma = sinfo->tx.desc[sinfo->tx.cur].dcb_dma; + /* DMA run to the new halt location */ + bkn_cdma_goto(sinfo, XGS_DMA_TX_CHAN, dcb_dma); + } +} + +static void +bkn_skb_tx(bkn_switch_info_t *sinfo) +{ + if (sinfo->tx.api_active) { + /* Switch from API Tx to SKB Tx */ + bkn_tx_cdma_chain_switch(sinfo); + } +} + +static void +bkn_api_tx(bkn_switch_info_t *sinfo) +{ + bkn_dcb_chain_t *dcb_chain; + + /* Assume that driver lock is held */ + if (list_empty(&sinfo->tx.api_dcb_list)) { + sinfo->tx.api_active = 0; + } else { + sinfo->tx.pkts++; + dcb_chain = list_entry(sinfo->tx.api_dcb_list.next, + bkn_dcb_chain_t, list); + DBG_DCB_TX(("Start API Tx DMA, first DCB @ 0x%08x (%d DCBs).\n", + (uint32_t)dcb_chain->dcb_dma, dcb_chain->dcb_cnt)); + + if (CDMA_CH(sinfo, XGS_DMA_TX_CHAN)) { + sinfo->tx.api_dcb_chain = dcb_chain; + if (!sinfo->tx.api_active) { + /* Switch from SKB Tx to API Tx */ + bkn_tx_cdma_chain_switch(sinfo); + } + list_del(&dcb_chain->list); + } else { + sinfo->tx.api_active = 1; + dev_dma_chan_clear(sinfo, XGS_DMA_TX_CHAN); + dev_irq_mask_enable(sinfo, XGS_DMA_TX_CHAN, 1); + dev_dma_chan_start(sinfo, XGS_DMA_TX_CHAN, + dcb_chain->dcb_dma); + list_del(&dcb_chain->list); + kfree(dcb_chain); + } + } +} + +static void +bkn_tx_cdma_chain_done(bkn_switch_info_t *sinfo, int done) +{ + int woffset; + int dcbs_done = 0; + bkn_evt_resource_t *evt; + + evt = &_bkn_evt[sinfo->evt_idx]; + if (sinfo->tx.api_active) { + sinfo->dma_events |= KCOM_DMA_INFO_F_TX_DONE; + evt->evt_wq_put++; + wake_up_interruptible(&evt->evt_wq); + /* Drain API Tx chains */ + while (sinfo->tx.api_dcb_chain != sinfo->tx.api_dcb_chain_end) { + woffset = sinfo->tx.api_dcb_chain->dcb_cnt * sinfo->dcb_wsize - 1; + if (!(sinfo->tx.api_dcb_chain->dcb_mem[woffset] & (1 << 31))) { + return; + } + kfree(sinfo->tx.api_dcb_chain); + bkn_api_tx(sinfo); + if ((++dcbs_done + done) >= MAX_TX_DCBS) { + if (sinfo->napi_poll_mode) { + /* Request one extra poll to reschedule Tx */ + sinfo->napi_poll_again = 1; + } else { + /* Request to yield for Continuous DMA mode */ + sinfo->tx_yield = 1; + } + return; + } + } + woffset = (sinfo->tx.api_dcb_chain->dcb_cnt - 1) * sinfo->dcb_wsize - 1; + if (!(sinfo->tx.api_dcb_chain->dcb_mem[woffset] & (1 << 31))) { + return; + } + /* Try and park at SKB Tx if API Tx done */ + bkn_skb_tx(sinfo); + kfree(sinfo->tx.api_dcb_chain); + sinfo->tx.api_dcb_chain = NULL; + sinfo->tx.api_dcb_chain_end = NULL; + if (!sinfo->napi_poll_mode) { + /* Not need to yield for Continuous DMA mode */ + sinfo->tx_yield = 0; + } + } else { + if (sinfo->tx.free == MAX_TX_DCBS) { + /* Try API Tx if SKB Tx done */ + bkn_api_tx(sinfo); + if (sinfo->tx.api_active) { + return; + } + } + } + + /* Resume if netif Tx resources available and API Tx not active */ + bkn_resume_tx(sinfo); +} + +static void +bkn_tx_chain_done(bkn_switch_info_t *sinfo, int done) +{ + bkn_desc_info_t *desc; + int idx, pending; + bkn_evt_resource_t *evt; + + evt = &_bkn_evt[sinfo->evt_idx]; + + DBG_IRQ(("Tx chain done (%d/%d)\n", sinfo->tx.cur, sinfo->tx.dirty)); + + if (CDMA_CH(sinfo, XGS_DMA_TX_CHAN)) { + return bkn_tx_cdma_chain_done(sinfo, done); + } + + dev_irq_mask_disable(sinfo, XGS_DMA_TX_CHAN, 0); + + if (sinfo->tx.api_active) { + sinfo->dma_events |= KCOM_DMA_INFO_F_TX_DONE; + evt->evt_wq_put++; + wake_up_interruptible(&evt->evt_wq); + /* Check if BCM API has more to send */ + bkn_api_tx(sinfo); + if (sinfo->tx.api_active) { + return; + } + } + + if (sinfo->tx.free == MAX_TX_DCBS) { + /* If netif Tx is idle then allow BCM API to send */ + bkn_api_tx(sinfo); + if (sinfo->tx.api_active) { + return; + } + } else { + /* If two or more DCBs are pending, chain them */ + pending = MAX_TX_DCBS - sinfo->tx.free; + idx = sinfo->tx.dirty; + while (--pending && idx < (MAX_TX_DCBS - 1)) { + sinfo->tx.desc[idx++].dcb_mem[1] |= (1 << 16); + DBG_DCB_TX(("Chain Tx DCB %d (%d)\n", idx, pending)); + } + /* Restart DMA from where we stopped */ + desc = &sinfo->tx.desc[sinfo->tx.dirty]; + DBG_DCB_TX(("Restart Tx DMA, DCB @ 0x%08x (%d).\n", + (uint32_t)desc->dcb_dma, sinfo->tx.dirty)); + dev_dma_chan_clear(sinfo, XGS_DMA_TX_CHAN); + dev_irq_mask_enable(sinfo, XGS_DMA_TX_CHAN, 0); + dev_dma_chan_start(sinfo, XGS_DMA_TX_CHAN, desc->dcb_dma); + } + + /* Resume if netif Tx resources available and API Tx not active */ + bkn_resume_tx(sinfo); +} + +static void +bkn_schedule_napi_poll(bkn_switch_info_t *sinfo) +{ + /* Schedule NAPI poll */ + DBG_NAPI(("Schedule NAPI poll on %s.\n", sinfo->dev->name)); + /* Disable interrupts until poll job is complete */ + sinfo->napi_poll_mode = 1; + /* Unlock while calling up network stack */ + spin_unlock(&sinfo->lock); + if (bkn_napi_schedule_prep(sinfo->dev, &sinfo->napi)) { + __bkn_napi_schedule(sinfo->dev, &sinfo->napi); + DBG_NAPI(("Schedule prep OK on %s.\n", sinfo->dev->name)); + } else { + /* Most likely the base device is has not been opened */ + gprintk("Warning: Unable to schedule NAPI - base device not up?\n"); + } + spin_lock(&sinfo->lock); +} + +static void +bkn_napi_poll_complete(bkn_switch_info_t *sinfo) +{ + /* Unlock while calling up network stack */ + spin_unlock(&sinfo->lock); + bkn_napi_complete(sinfo->dev, &sinfo->napi); + spin_lock(&sinfo->lock); + /* Re-enable interrupts */ + sinfo->napi_poll_mode = 0; + dev_irq_mask_set(sinfo, sinfo->irq_mask); +} + +static int +xgs_do_dma(bkn_switch_info_t *sinfo, int budget) +{ + int rx_dcbs_done = 0, tx_dcbs_done = 0; + uint32_t dma_stat; + int chan; + + DEV_READ32(sinfo, CMIC_DMA_STATr, &dma_stat); + + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + if (dma_stat & DS_DESC_DONE_TST(XGS_DMA_RX_CHAN + chan)) { + xgs_dma_desc_clear(sinfo, XGS_DMA_RX_CHAN + chan); + rx_dcbs_done += bkn_do_rx(sinfo, chan, budget - rx_dcbs_done); + bkn_rx_desc_done(sinfo, chan); + } + + if (dma_stat & DS_CHAIN_DONE_TST(XGS_DMA_RX_CHAN + chan)) { + xgs_dma_chain_clear(sinfo, XGS_DMA_RX_CHAN + chan); + bkn_rx_chain_done(sinfo, chan); + } + } + + if (dma_stat & DS_CHAIN_DONE_TST(XGS_DMA_TX_CHAN)) { + xgs_dma_chain_clear(sinfo, XGS_DMA_TX_CHAN); + tx_dcbs_done = bkn_do_tx(sinfo); + bkn_tx_chain_done(sinfo, tx_dcbs_done); + } + + return rx_dcbs_done; +} + +static int +xgsm_do_dma(bkn_switch_info_t *sinfo, int budget) +{ + int rx_dcbs_done = 0, tx_dcbs_done = 0; + uint32_t dma_stat, irq_stat = 0; + int chan; + + /* Get Controlled interrupt states for Continuous DMA mode */ + if (sinfo->cdma_channels) { + DEV_READ32(sinfo, CMICM_IRQ_STATr, &irq_stat); + } + + DEV_READ32(sinfo, CMICM_DMA_STATr, &dma_stat); + + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + if (dma_stat & (0x10 << (XGS_DMA_RX_CHAN + chan)) || + irq_stat & (0x08000000 << (XGS_DMA_RX_CHAN + chan))) { + xgsm_dma_desc_clear(sinfo, XGS_DMA_RX_CHAN + chan); + rx_dcbs_done += bkn_do_rx(sinfo, chan, budget - rx_dcbs_done); + bkn_rx_desc_done(sinfo, chan); + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + continue; + } + } + + if (dma_stat & (0x1 << (XGS_DMA_RX_CHAN + chan))) { + xgsm_dma_chain_clear(sinfo, XGS_DMA_RX_CHAN + chan); + bkn_rx_chain_done(sinfo, chan); + } + } + + if (dma_stat & (0x1 << XGS_DMA_TX_CHAN) || + irq_stat & (0x08000000 << XGS_DMA_TX_CHAN)) { + if (CDMA_CH(sinfo, XGS_DMA_TX_CHAN)) { + xgsm_dma_desc_clear(sinfo, XGS_DMA_TX_CHAN); + } else { + xgsm_dma_chain_clear(sinfo, XGS_DMA_TX_CHAN); + } + tx_dcbs_done = bkn_do_tx(sinfo); + bkn_tx_chain_done(sinfo, tx_dcbs_done); + } + + return rx_dcbs_done; +} + +static int +dev_do_dma(bkn_switch_info_t *sinfo, int budget) +{ + if (DEV_HAS_CMICM(sinfo)) { + return xgsm_do_dma(sinfo, budget); + } else { + return xgs_do_dma(sinfo, budget); + } +} + +static void +xgs_isr(bkn_switch_info_t *sinfo) +{ + uint32_t irq_stat; + int rx_dcbs_done; + + DEV_READ32(sinfo, CMIC_IRQ_STATr, &irq_stat); + if ((irq_stat & sinfo->irq_mask) == 0) { + /* Not ours */ + return; + } + sinfo->interrupts++; + + DBG_IRQ(("Got interrupt on device %d (0x%08x)\n", + sinfo->dev_no, irq_stat)); + + if (use_napi) { + bkn_schedule_napi_poll(sinfo); + } else { + xgs_irq_mask_set(sinfo, 0); + do { + rx_dcbs_done = xgs_do_dma(sinfo, MAX_RX_DCBS); + } while (rx_dcbs_done); + } + + xgs_irq_mask_set(sinfo, sinfo->irq_mask); +} + +static void +xgsm_isr(bkn_switch_info_t *sinfo) +{ + uint32_t irq_stat; + int rx_dcbs_done; + + DEV_READ32(sinfo, CMICM_IRQ_STATr, &irq_stat); + if ((irq_stat & sinfo->irq_mask) == 0) { + /* Not ours */ + return; + } + sinfo->interrupts++; + + DBG_IRQ(("Got interrupt on device %d (0x%08x)\n", + sinfo->dev_no, irq_stat)); + + if (use_napi) { + bkn_schedule_napi_poll(sinfo); + } else { + xgsm_irq_mask_set(sinfo, 0); + do { + rx_dcbs_done = xgsm_do_dma(sinfo, MAX_RX_DCBS); + if (sinfo->cdma_channels) { + if (rx_dcbs_done >= MAX_RX_DCBS || sinfo->tx_yield) { + /* Continuous DMA mode requires to yield timely */ + break; + } + } + } while (rx_dcbs_done); + } + + xgsm_irq_mask_set(sinfo, sinfo->irq_mask); +} + +static void +bkn_isr(void *isr_data) +{ + bkn_switch_info_t *sinfo = isr_data; + + /* Safe exit on SMP systems */ + if (!module_initialized) { + return; + } + + /* Ensure that we do not touch registers during device reset */ + if (sinfo->irq_mask == 0) { + /* Not ours */ + return; + } + + spin_lock(&sinfo->lock); + + if (sinfo->napi_poll_mode) { + /* Not ours */ + spin_unlock(&sinfo->lock); + return; + } + + if (DEV_HAS_CMICM(sinfo)) { + xgsm_isr(sinfo); + } else { + xgs_isr(sinfo); + } + + spin_unlock(&sinfo->lock); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void +bkn_poll_controller(struct net_device *dev) +{ + bkn_priv_t *priv = netdev_priv(dev); + + disable_irq(dev->irq); + bkn_isr(priv->sinfo); + enable_irq(dev->irq); +} +#endif + +static void +bkn_resume_rx(bkn_switch_info_t *sinfo) +{ + bkn_desc_info_t *desc; + bkn_dcb_chain_t *dcb_chain; + dma_addr_t cur_halt, last_dcb, dcb_dma; + int woffset, chan, cdma_running; + + /* Resume Rx DMA on all channels */ + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + if (sinfo->rx[chan].use_rx_skb) { + cdma_running = 0; + bkn_api_rx_restart(sinfo); + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + cur_halt = sinfo->halt_addr[XGS_DMA_RX_CHAN + chan]; + last_dcb = sinfo->rx[chan].desc[MAX_RX_DCBS].dcb_dma; + if (cur_halt != last_dcb) { + desc = &sinfo->rx[chan].desc[sinfo->rx[chan].dirty + 1]; + bkn_cdma_goto(sinfo, XGS_DMA_RX_CHAN + chan, + desc->dcb_dma); + cdma_running = 1; + } + } + if (!cdma_running) { + bkn_rx_restart(sinfo, chan); + } + } else { + cdma_running = 0; + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + if (sinfo->rx[chan].api_active) { + dcb_chain = sinfo->rx[chan].api_dcb_chain_end; + woffset = (dcb_chain->dcb_cnt - 1) * sinfo->dcb_wsize; + dcb_dma = dcb_chain->dcb_dma + woffset * sizeof(uint32_t); + bkn_cdma_goto(sinfo, XGS_DMA_RX_CHAN + chan, dcb_dma); + cdma_running = 1; + } + } + if (!cdma_running) { + bkn_api_rx_restart(sinfo); + } + } + } +} + +static int +bkn_open(struct net_device *dev) +{ + bkn_priv_t *priv = netdev_priv(dev); + bkn_switch_info_t *sinfo = priv->sinfo; + unsigned long flags; + + /* Check if base device */ + if (priv->id <= 0) { + /* NAPI used only on base device */ + if (use_napi) { + bkn_napi_enable(dev, &sinfo->napi); + } + + /* Start DMA when base device is started */ + if (sinfo->basedev_suspended) { + spin_lock_irqsave(&sinfo->lock, flags); + dev_do_dma(sinfo, MAX_RX_DCBS); + sinfo->basedev_suspended = 0; + bkn_api_tx(sinfo); + if (!sinfo->tx.api_active) { + bkn_resume_tx(sinfo); + } + bkn_resume_rx(sinfo); + spin_unlock_irqrestore(&sinfo->lock, flags); + } + } + + if (!sinfo->basedev_suspended) { + netif_start_queue(dev); + } + + return 0; +} + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) +static int +bkn_set_mac_address(struct net_device *dev, void *addr) +{ + if (!is_valid_ether_addr(((struct sockaddr *)addr)->sa_data)) { + return -EINVAL; + } + memcpy(dev->dev_addr, ((struct sockaddr *)addr)->sa_data, dev->addr_len); + return 0; +} +#endif + +static int +bkn_change_mtu(struct net_device *dev, int new_mtu) +{ + if (new_mtu < 68 || new_mtu > rx_buffer_size) { + return -EINVAL; + } + dev->mtu = new_mtu; + return 0; +} + +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) +static int +bkn_poll(struct net_device *dev, int *budget) +{ + bkn_priv_t *priv = netdev_priv(dev); + bkn_switch_info_t *sinfo = priv->sinfo; + int cur_budget = *budget; + int poll_again = 0; + int rx_dcbs_done; + unsigned long flags; + + spin_lock_irqsave(&sinfo->lock, flags); + + DBG_NAPI(("NAPI poll on %s.\n", dev->name)); + + sinfo->napi_poll_again = 0; + + if (cur_budget > dev->quota) { + cur_budget = dev->quota; + } + + rx_dcbs_done = dev_do_dma(sinfo, cur_budget); + + *budget -= rx_dcbs_done; + cur_budget -= rx_dcbs_done; + dev->quota -= rx_dcbs_done; + + if (sinfo->napi_poll_again || cur_budget <= 0) { + poll_again = 1; + sinfo->napi_not_done++; + } else { + bkn_napi_poll_complete(sinfo); + } + + spin_unlock_irqrestore(&sinfo->lock, flags); + + return poll_again; +} +#else +static int +bkn_poll(struct napi_struct *napi, int budget) +{ + bkn_switch_info_t *sinfo = container_of(napi, bkn_switch_info_t, napi); + int rx_dcbs_done; + unsigned long flags; + + spin_lock_irqsave(&sinfo->lock, flags); + + DBG_NAPI(("NAPI poll on %s.\n", sinfo->dev->name)); + + sinfo->napi_poll_again = 0; + + rx_dcbs_done = dev_do_dma(sinfo, budget); + + if (sinfo->napi_poll_again || rx_dcbs_done >= budget) { + /* Force poll again */ + rx_dcbs_done = budget; + sinfo->napi_not_done++; + } else { + bkn_napi_poll_complete(sinfo); + } + + spin_unlock_irqrestore(&sinfo->lock, flags); + + return rx_dcbs_done; +} +#endif + +static int +bkn_stop(struct net_device *dev) +{ + bkn_priv_t *priv = netdev_priv(dev); + bkn_switch_info_t *sinfo = priv->sinfo; + unsigned long flags; + + netif_stop_queue(dev); + + /* Check if base device */ + if (priv->id <= 0) { + /* NAPI used only on base device */ + if (use_napi) { + bkn_napi_disable(dev, &sinfo->napi); + } + /* Suspend all devices if base device is stopped */ + if (basedev_suspend) { + spin_lock_irqsave(&sinfo->lock, flags); + bkn_suspend_tx(sinfo); + sinfo->basedev_suspended = 1; + spin_unlock_irqrestore(&sinfo->lock, flags); + } + } + + return 0; +} + +/* + * Network Device Statistics. + * Cleared at init time. + */ +static struct net_device_stats * +bkn_get_stats(struct net_device *dev) +{ + bkn_priv_t *priv = netdev_priv(dev); + + return &priv->stats; +} + +/* Fake multicast ability */ +static void +bkn_set_multicast_list(struct net_device *dev) +{ +} + +static int +bkn_tx(struct sk_buff *skb, struct net_device *dev) +{ + bkn_priv_t *priv = netdev_priv(dev); + bkn_switch_info_t *sinfo = priv->sinfo; + struct sk_buff *new_skb; + unsigned char *pktdata; + int pktlen; + int taglen; + int rcpulen; + int metalen; + int sop; + int idx; + uint16_t tpid; + uint32_t *metadata; + unsigned long flags; + + DBG_VERB(("Netif Tx: Len=%d\n", skb->len)); + + if (priv->id <= 0) { + /* Do not transmit on base device */ + priv->stats.tx_dropped++; + dev_kfree_skb_any(skb); + return 0; + } + + if (!netif_carrier_ok(dev)) { + DBG_WARN(("Tx drop: Invalid RCPU encapsulation\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_no_link++; + dev_kfree_skb_any(skb); + return 0; + } + + spin_lock_irqsave(&sinfo->lock, flags); + + if (sinfo->tx.free > 1) { + bkn_desc_info_t *desc = &sinfo->tx.desc[sinfo->tx.cur]; + uint32_t *dcb; + + pktdata = skb->data; + pktlen = skb->len + 4; + rcpulen = 0; + sop = 0; + + if (priv->flags & KCOM_NETIF_F_RCPU_ENCAP) { + rcpulen = RCPU_HDR_SIZE; + if (skb->len < (rcpulen + 14)) { + DBG_WARN(("Tx drop: Invalid RCPU encapsulation\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_rcpu_encap++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + if (check_rcpu_signature && + ((skb->data[18] << 8) | skb->data[19]) != sinfo->rcpu_sig) { + DBG_WARN(("Tx drop: Invalid RCPU signature\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_rcpu_sig++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + if (skb->data[21] & RCPU_F_MODHDR) { + rcpulen += RCPU_TX_META_SIZE; + sop = skb->data[RCPU_HDR_SIZE]; + switch (sop) { + case 0xff: + case 0x81: + case 0xfb: + case 0xfc: + break; + default: + DBG_WARN(("Tx drop: Invalid RCPU meta data\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_rcpu_meta++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + } + /* Skip over RCPU encapsulation */ + pktdata = &skb->data[rcpulen]; + pktlen -= rcpulen; + + /* CPU packets require tag */ + if (sop == 0) { + tpid = (pktdata[12] << 8) | pktdata[13]; + if (tpid != 0x8100) { + if (skb_header_cloned(skb)) { + /* Current SKB cannot be modified */ + DBG_SKB(("Realloc Tx SKB\n")); + new_skb = dev_alloc_skb(pktlen + 4); + if (new_skb == NULL) { + DBG_WARN(("Tx drop: No SKB memory\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_no_skb++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + memcpy(new_skb->data, pktdata, 12); + memcpy(&new_skb->data[16], &pktdata[12], pktlen - 12); + skb_put(new_skb, pktlen + 4); + dev_kfree_skb_any(skb); + skb = new_skb; + pktdata = skb->data; + } else { + /* Add tag to existing buffer */ + DBG_SKB(("Expand into unused RCPU header\n")); + pktdata = &skb->data[rcpulen-4]; + for (idx = 0; idx < 12; idx++) { + pktdata[idx] = pktdata[idx+4]; + } + } + pktdata[12] = 0x81; + pktdata[13] = 0x00; + pktdata[14] = (priv->vlan >> 8) & 0xf; + pktdata[15] = priv->vlan & 0xff; + pktlen += 4; + } + } + } else if (priv->port < 0 || (priv->flags & KCOM_NETIF_F_ADD_TAG)) { + /* Need to add VLAN tag if packet is untagged */ + tpid = (skb->data[12] << 8) | skb->data[13]; + if (tpid != 0x8100) { + if (skb_header_cloned(skb) || skb_headroom(skb) < 4) { + /* Current SKB cannot be modified */ + DBG_SKB(("Realloc Tx SKB\n")); + new_skb = dev_alloc_skb(pktlen + 4); + if (new_skb == NULL) { + DBG_WARN(("Tx drop: No SKB memory\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_no_skb++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + memcpy(new_skb->data, skb->data, 12); + memcpy(&new_skb->data[16], &skb->data[12], pktlen - 12); + skb_put(new_skb, pktlen + 4); + dev_kfree_skb_any(skb); + skb = new_skb; + } else { + /* Add tag to existing buffer */ + DBG_SKB(("Expand Tx SKB\n")); + skb_push(skb, 4); + for (idx = 0; idx < 12; idx++) { + skb->data[idx] = skb->data[idx+4]; + } + } + pktdata = skb->data; + pktdata[12] = 0x81; + pktdata[13] = 0x00; + pktdata[14] = (priv->vlan >> 8) & 0xf; + pktdata[15] = priv->vlan & 0xff; + pktlen += 4; + } + } + + /* Pad packet if needed */ + taglen = 0; + tpid = (pktdata[12] << 8) | pktdata[13]; + if (tpid == 0x8100) { + taglen = 4; + } + if (pktlen < (64 + taglen)) { + pktlen = (64 + taglen); + /* Pad runt packets accounting for skipped RCPU header if needed */ + if (SKB_PADTO(skb, pktlen + rcpulen) != 0) { + DBG_WARN(("Tx drop: skb_padto failed\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_pad_fail++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + /* skb_padto may update the skb->data pointer */ + pktdata = &skb->data[rcpulen]; + DBG_SKB(("Packet padded to %d bytes\n", pktlen)); + } + + if (pktlen > SOC_DCB_KNET_COUNT_MASK) { + DBG_WARN(("Tx drop: size of pkt (%d) is out of range(%d)\n", + pktlen, SOC_DCB_KNET_COUNT_MASK)); + sinfo->tx.pkts_d_over_limit++; + priv->stats.tx_dropped++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + + dcb = desc->dcb_mem; + memset(dcb, 0, sizeof(uint32_t) * sinfo->dcb_wsize); + dcb[1] = pktlen; + if (priv->flags & KCOM_NETIF_F_RCPU_ENCAP) { + /* If module header SOP is non-zero, use RCPU meta data */ + if (sop != 0) { + metalen = (sinfo->dcb_wsize - 3) * sizeof(uint32_t); + if (metalen > RCPU_TX_META_SIZE) { + metalen = RCPU_TX_META_SIZE; + } + metadata = (uint32_t *)&skb->data[RCPU_HDR_SIZE]; + for (idx = 0; idx < BYTES2WORDS(metalen); idx++) { + dcb[idx+2] = ntohl(metadata[idx]); + } + dcb[1] |= (1 << 19); + } + bkn_dump_dcb("Tx RCPU", dcb, sinfo->dcb_wsize, XGS_DMA_TX_CHAN); + } else if (priv->port >= 0) { + /* Send to physical port */ + dcb[1] |= (1 << 19); + switch (sinfo->dcb_type) { + case 23: + case 26: + case 30: + case 31: + case 34: + case 37: + dcb[2] = 0x81000000; + dcb[3] = priv->port; + dcb[3] |= (priv->qnum & 0xc00) << 20; + dcb[4] = 0x00040000; + dcb[4] |= (priv->qnum & 0x3ff) << 8; + break; + case 32: + dcb[2] = 0x81000000; + dcb[3] = priv->port; + dcb[4] = 0x4000; + /* according to format of register SOBMH in bcm56960_a0 */ + dcb[4] |= (priv->qnum & 0x3f) << 8; + break; + case 33: + dcb[2] = 0x81000000; + dcb[3] = (priv->port) << 2; + dcb[4] = 0x00100000; + dcb[4] |= (priv->qnum & 0xfff) << 8; + break; + case 35: + dcb[2] = 0x81000000; + dcb[3] = (priv->port) << 4; + dcb[4] = 0x00400000; + dcb[4] |= (priv->qnum & 0x3fff) << 8; + break; + case 24: + dcb[2] = 0xff000000; + dcb[3] = 0x00000100; + dcb[4] = priv->port; + dcb[4] |= (priv->qnum & 0xfff) << 14; + break; + case 28: + { + if (priv->type == KCOM_NETIF_T_PORT) { + /* add PTCH ITMH header */ + if (skb_header_cloned(skb) || skb_headroom(skb) < 4) { + /* Current SKB cannot be modified */ + DBG_SKB(("Realloc Tx SKB for DNX ITMH header\n")); + new_skb = dev_alloc_skb(pktlen + 4 + 2); + if (new_skb == NULL) { + DBG_WARN(("Tx drop: No SKB memory for DNX ITMH header\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_no_skb++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + memcpy(&new_skb->data[6], skb->data, pktlen); + skb_put(new_skb, pktlen + 6); + dev_kfree_skb_any(skb); + skb = new_skb; + } else { + /* Add tag to existing buffer */ + DBG_SKB(("Expand Tx SKB for DNX ITMH header\n")); + skb_push(skb, 6); + } + pktdata = skb->data; + pktdata[0] = 0x50; + pktdata[1] = 0x00; + memcpy(&pktdata[2], priv->itmh, 4); + pktlen += 6; + } + else if (priv->type == KCOM_NETIF_T_VLAN) { + /* add PTCH header */ + if (skb_header_cloned(skb) || skb_headroom(skb) < 4) { + /* Current SKB cannot be modified */ + DBG_SKB(("Realloc Tx SKB for DNX header\n")); + new_skb = dev_alloc_skb(pktlen + 2); + if (new_skb == NULL) { + DBG_WARN(("Tx drop: No SKB memory for DNX header\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_no_skb++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + memcpy(&new_skb->data[2], skb->data, pktlen); + skb_put(new_skb, pktlen + 2); + dev_kfree_skb_any(skb); + skb = new_skb; + } else { + /* Add tag to existing buffer */ + DBG_SKB(("Expand Tx SKB for DNX header\n")); + skb_push(skb, 2); + } + pktdata = skb->data; + pktdata[0] = 0xd0; + pktdata[1] = priv->port; + pktlen += 2; + } + dcb[1] = pktlen; + break; + } + case 29: + dcb[2] = 0x81000000; + dcb[3] = priv->port; + dcb[4] = 0x00100000; + dcb[4] |= (priv->qnum & 0xfff) << 8; + break; + default: + dcb[2] = 0xff000000; + dcb[3] = 0x00000100; + dcb[4] = priv->port; + break; + } + } + + /* Optional SKB updates */ + if (knet_tx_cb != NULL) { + skb = knet_tx_cb(skb, sinfo->dev_no, dcb); + if (skb == NULL) { + /* Consumed by call-back */ + DBG_WARN(("Tx drop: Consumed by call-back\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_callback++; + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + /* Restore (possibly) altered packet variables + * bit0 -bit15 of dcb[1] is used to save requested byte count + */ + if ((skb->len + 4) <= SOC_DCB_KNET_COUNT_MASK) { + pktdata = skb->data; + pktlen = skb->len + 4; + if (pktlen < (64 + taglen)) { + pktlen = (64 + taglen); + if (SKB_PADTO(skb, pktlen) != 0) { + DBG_WARN(("Tx drop: skb_padto failed\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_pad_fail++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + DBG_SKB(("Packet padded to %d bytes after tx callback\n", pktlen)); + } + } else { + DBG_WARN(("Tx drop: size of pkt (%d) is out of range(%d)\n", + pktlen, SOC_DCB_KNET_COUNT_MASK)); + sinfo->tx.pkts_d_over_limit++; + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_callback++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&sinfo->lock, flags); + return 0; + } + } + /* Prepare for DMA */ + desc->skb = skb; + desc->dma_size = pktlen; + desc->skb_dma = DMA_MAP_SINGLE(sinfo->dma_dev, + pktdata, desc->dma_size, + DMA_TODEV); + dcb[0] = desc->skb_dma; + dcb[1] &= ~SOC_DCB_KNET_COUNT_MASK; + dcb[1] |= pktlen; + + DBG_DCB_TX(("Add Tx DCB @ 0x%08x (%d) [%d free] (%d bytes).\n", + (uint32_t)desc->dcb_dma, sinfo->tx.cur, + sinfo->tx.free, pktlen)); + bkn_dump_pkt(pktdata, skb->len - rcpulen, XGS_DMA_TX_CHAN); + + if (CDMA_CH(sinfo, XGS_DMA_TX_CHAN)) { + dcb[1] |= (1 << 24) | (1 << 16); + } else { + bkn_tx_dma_start(sinfo); + } + if (++sinfo->tx.cur >= MAX_TX_DCBS) { + sinfo->tx.cur = 0; + } + sinfo->tx.free--; + + if (CDMA_CH(sinfo, XGS_DMA_TX_CHAN) && !sinfo->tx.api_active) { + /* DMA run to the new halt location */ + bkn_cdma_goto(sinfo, XGS_DMA_TX_CHAN, + sinfo->tx.desc[sinfo->tx.cur].dcb_dma); + } + + priv->stats.tx_packets++; + priv->stats.tx_bytes += pktlen; + sinfo->tx.pkts++; + } + else { + DBG_WARN(("Tx drop: No DMA resources\n")); + priv->stats.tx_dropped++; + sinfo->tx.pkts_d_dma_resrc++; + dev_kfree_skb_any(skb); + } + + /* Check our Tx resources */ + if (sinfo->tx.free <= 1) { + bkn_suspend_tx(sinfo); + } + + netif_trans_update(dev); + + spin_unlock_irqrestore(&sinfo->lock, flags); + + return 0; +} + +static void +bkn_timer(unsigned long context) +{ + bkn_switch_info_t *sinfo = (bkn_switch_info_t *)context; + unsigned long flags; + int chan; + int restart_timer; + + spin_lock_irqsave(&sinfo->lock, flags); + + sinfo->timer_runs++; + + restart_timer = 0; + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + /* Restart channel if not running */ + if (sinfo->rx[chan].running == 0) { + bkn_rx_refill(sinfo, chan); + if (bkn_rx_restart(sinfo, chan) != 0) { + restart_timer = 1; + } + } + } + + if (restart_timer) { + /* Presumably still out of memory */ + sinfo->timer.expires = jiffies + 1; + add_timer(&sinfo->timer); + } else { + sinfo->timer_queued = 0; + } + + spin_unlock_irqrestore(&sinfo->lock, flags); +} + +static void +bkn_rx_add_tokens(bkn_switch_info_t *sinfo, int chan) +{ + unsigned long cur_jif, ticks; + uint32_t tokens_per_tick; + + tokens_per_tick = sinfo->rx[chan].rate_max / HZ; + cur_jif = jiffies; + ticks = cur_jif - sinfo->rx[chan].tok_jif; + sinfo->rx[chan].tokens += ticks * tokens_per_tick; + sinfo->rx[chan].tok_jif = cur_jif; + if (sinfo->rx[chan].tokens > sinfo->rx[chan].burst_max) { + sinfo->rx[chan].tokens = sinfo->rx[chan].burst_max; + } + + /* Restart channel if not running */ + if (sinfo->rx[chan].running == 0) { + bkn_rx_refill(sinfo, chan); + bkn_rx_restart(sinfo, chan); + } +} + +static void +bkn_rxtick(unsigned long context) +{ + bkn_switch_info_t *sinfo = (bkn_switch_info_t *)context; + unsigned long flags; + unsigned long cur_jif, ticks; + uint32_t pkt_diff; + int chan; + + spin_lock_irqsave(&sinfo->lock, flags); + + sinfo->rxtick.expires = jiffies + sinfo->rxtick_jiffies; + + /* For debug purposes we maintain a rough actual packet rate */ + if (++sinfo->rxticks >= sinfo->rxticks_per_sec) { + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + pkt_diff = sinfo->rx[chan].pkts - sinfo->rx[chan].pkts_ref; + cur_jif = jiffies; + ticks = cur_jif - sinfo->rx[chan].rate_jif; + sinfo->rx[chan].rate = (pkt_diff * HZ) / ticks; + sinfo->rx[chan].rate_jif = cur_jif; + sinfo->rx[chan].pkts_ref = sinfo->rx[chan].pkts; + } + sinfo->rxticks = 0; + } + + /* Update tokens for Rx rate control */ + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + if (sinfo->rx[chan].tokens < sinfo->rx[chan].burst_max) { + bkn_rx_add_tokens(sinfo, chan); + } + } + + spin_unlock_irqrestore(&sinfo->lock, flags); + + add_timer(&sinfo->rxtick); +} + +static void +bkn_rx_rate_config(bkn_switch_info_t *sinfo) +{ + unsigned long flags; + int chan; + uint32_t rxticks_per_sec, rps; + uint32_t jiffies_per_rxtick; + uint32_t tokens_per_rxtick; + + spin_lock_irqsave(&sinfo->lock, flags); + + /* Calculate the minimum update frequency across all channels */ + rxticks_per_sec = 1; + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + if (sinfo->rx[chan].burst_max == 0) { + sinfo->rx[chan].burst_max = sinfo->rx[chan].rate_max / 10; + } + rps = sinfo->rx[chan].rate_max / sinfo->rx[chan].burst_max; + if (rxticks_per_sec < rps) { + rxticks_per_sec = rps; + } + } + + /* Convert update frequency to system ticks */ + jiffies_per_rxtick = HZ / rxticks_per_sec; + if (jiffies_per_rxtick == 0) { + jiffies_per_rxtick = 1; + } + rxticks_per_sec = HZ / jiffies_per_rxtick; + + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + /* Ensure that burst size satifies overall rate */ + tokens_per_rxtick = sinfo->rx[chan].rate_max / rxticks_per_sec; + if (sinfo->rx[chan].burst_max < tokens_per_rxtick) { + sinfo->rx[chan].burst_max = tokens_per_rxtick; + } + /* Ensure that rate has a sane value */ + if (sinfo->rx[chan].rate_max != 0) { + if (sinfo->rx[chan].rate_max < rxticks_per_sec) { + sinfo->rx[chan].rate_max = rxticks_per_sec; + } + } + sinfo->rx[chan].tokens = sinfo->rx[chan].burst_max; + } + + /* Update timer controls */ + sinfo->rxticks_per_sec = rxticks_per_sec; + sinfo->rxtick_jiffies = jiffies_per_rxtick; + + spin_unlock_irqrestore(&sinfo->lock, flags); +} + +static void +bkn_destroy_sinfo(bkn_switch_info_t *sinfo) +{ + list_del(&sinfo->list); + bkn_free_dcbs(sinfo); + kfree(sinfo); +} + +static bkn_switch_info_t * +bkn_create_sinfo(int dev_no) +{ + bkn_switch_info_t *sinfo; + uint32_t val; + int chan; + + if ((sinfo = kmalloc(sizeof(*sinfo), GFP_KERNEL)) == NULL) { + return NULL; + } + memset(sinfo, 0, sizeof(*sinfo)); + INIT_LIST_HEAD(&sinfo->ndev_list); + INIT_LIST_HEAD(&sinfo->rxpf_list); + sinfo->base_addr = lkbde_get_dev_virt(dev_no); + sinfo->dma_dev = lkbde_get_dma_dev(dev_no); + sinfo->pdev = lkbde_get_hw_dev(dev_no); + sinfo->dev_no = dev_no; + sinfo->evt_idx = -1; + + spin_lock_init(&sinfo->lock); + + init_timer(&sinfo->timer); + sinfo->timer.expires = jiffies + 1; + sinfo->timer.data = (unsigned long)sinfo; + sinfo->timer.function = bkn_timer; + + INIT_LIST_HEAD(&sinfo->tx.api_dcb_list); + + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + INIT_LIST_HEAD(&sinfo->rx[chan].api_dcb_list); + sinfo->rx[chan].use_rx_skb = use_rx_skb; + } + + /* + * Check for dual DMA mode where Rx DMA channel 0 uses DMA buffers + * provided by the BCM API, and the remaining Rx DMA channel(s) + * use socket buffers (SKB) provided by the Linux kernel. + */ + if (use_rx_skb == 2) { + sinfo->rx[0].use_rx_skb = 0; + } + + init_timer(&sinfo->rxtick); + sinfo->rxtick.expires = jiffies + 1; + sinfo->rxtick.data = (unsigned long)sinfo; + sinfo->rxtick.function = bkn_rxtick; + + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + sinfo->rx[chan].rate_max = rx_rate[chan]; + sinfo->rx[chan].burst_max = rx_burst[chan]; + } + bkn_rx_rate_config(sinfo); + + add_timer(&sinfo->rxtick); + + list_add_tail(&sinfo->list, &_sinfo_list); + + sinfo->cmic_type = 'e'; + DEV_READ32(sinfo, CMIC_DEV_REV_IDr, &val); + if (val == 0) { + sinfo->cmic_type = 'm'; + DEV_READ32(sinfo, CMICM_DEV_REV_IDr, &val); + } + + DBG_VERB(("Check dev/rev: 0x%08x\n", val)); + + return sinfo; +} + + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) +static const struct net_device_ops bkn_netdev_ops = { + .ndo_open = bkn_open, + .ndo_stop = bkn_stop, + .ndo_start_xmit = bkn_tx, + .ndo_get_stats = bkn_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_rx_mode = bkn_set_multicast_list, + .ndo_set_mac_address = bkn_set_mac_address, + .ndo_do_ioctl = NULL, + .ndo_tx_timeout = NULL, + .ndo_change_mtu = bkn_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = bkn_poll_controller, +#endif +}; +#endif + +static struct net_device * +bkn_init_ndev(u8 *mac, char *name) +{ + struct net_device *dev; + + /* Create Ethernet device */ + dev = alloc_etherdev(sizeof(bkn_priv_t)); + + if (dev == NULL) { + DBG_WARN(("Error allocating Ethernet device.\n")); + return NULL; + } +#ifdef SET_MODULE_OWNER + SET_MODULE_OWNER(dev); +#endif + + /* Set the device MAC address */ + memcpy(dev->dev_addr, mac, 6); + + /* Device information -- not available right now */ + dev->irq = 0; + dev->base_addr = 0; + + /* Default MTU should not exceed MTU of switch front-panel ports */ + dev->mtu = default_mtu; + if (dev->mtu == 0) { + dev->mtu = rx_buffer_size; + } + + /* Device vectors */ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,29)) + dev->netdev_ops = &bkn_netdev_ops; +#else + dev->open = bkn_open; + dev->hard_start_xmit = bkn_tx; + dev->stop = bkn_stop; + dev->set_multicast_list = bkn_set_multicast_list; + dev->do_ioctl = NULL; + dev->get_stats = bkn_get_stats; + dev->change_mtu = bkn_change_mtu; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = bkn_poll_controller; +#endif +#endif + if (name && *name) { + strncpy(dev->name, name, IFNAMSIZ-1); + } + + /* Register the kernel Ethernet device */ + if (register_netdev(dev)) { + DBG_WARN(("Error registering Ethernet device.\n")); + free_netdev(dev); + return NULL; + } + DBG_VERB(("Created Ethernet device %s.\n", dev->name)); + + return dev; +} + +/* + * Device Link Control Proc Read Entry + */ +static int +bkn_proc_link_show(struct seq_file *m, void *v) +{ + struct list_head *slist, *dlist; + struct net_device *dev; + bkn_priv_t *priv; + bkn_switch_info_t *sinfo; + unsigned long flags; + + seq_printf(m, "Software link status:\n"); + list_for_each(slist, &_sinfo_list) { + sinfo = (bkn_switch_info_t *)slist; + spin_lock_irqsave(&sinfo->lock, flags); + list_for_each(dlist, &sinfo->ndev_list) { + priv = (bkn_priv_t *)dlist; + dev = priv->dev; + if (dev) { + seq_printf(m, " %-14s %s\n", dev->name, + netif_carrier_ok(dev) ? "up" : "down"); + } + } + spin_unlock_irqrestore(&sinfo->lock, flags); + } + return 0; +} + +static int +bkn_proc_link_open(struct inode * inode, struct file * file) +{ + return single_open(file, bkn_proc_link_show, NULL); +} + +/* + * Device Link Control Proc Write Entry + * + * Syntax: + * =up|down + * + * Where is a virtual network interface name. + * + * Examples: + * eth4=up + * eth4=down + */ +static ssize_t +bkn_proc_link_write(struct file *file, const char *buf, + size_t count, loff_t *loff) +{ + struct list_head *slist, *dlist; + struct net_device *dev; + bkn_priv_t *priv; + bkn_switch_info_t *sinfo; + unsigned long flags; + char link_str[40]; + char *ptr; + char *newline; + + if (count >= sizeof(link_str)) { + count = sizeof(link_str) - 1; + } + if (copy_from_user(link_str, buf, count)) { + return -EFAULT; + } + link_str[count] = 0; + newline = strchr(link_str, '\n'); + if (newline) { + /* Chop off the trailing newline */ + *newline = '\0'; + } + + if ((ptr = strchr(link_str, '=')) == NULL && + (ptr = strchr(link_str, ':')) == NULL) { + gprintk("Error: link syntax not recognized: '%s'\n", link_str); + return count; + } + *ptr++ = 0; + + dev = NULL; + list_for_each(slist, &_sinfo_list) { + sinfo = (bkn_switch_info_t *)slist; + spin_lock_irqsave(&sinfo->lock, flags); + list_for_each(dlist, &sinfo->ndev_list) { + priv = (bkn_priv_t *)dlist; + if (priv->dev) { + if (strcmp(priv->dev->name, link_str) == 0) { + dev = priv->dev; + break; + } + } + } + if (dev) { + if (strcmp(ptr, "up") == 0) { + netif_carrier_on(dev); + } else if (strcmp(ptr, "down") == 0) { + netif_carrier_off(dev); + } else { + gprintk("Warning: unknown link state setting: '%s'\n", ptr); + } + spin_unlock_irqrestore(&sinfo->lock, flags); + return count; + } + spin_unlock_irqrestore(&sinfo->lock, flags); + } + + gprintk("Warning: unknown network interface: '%s'\n", link_str); + + return count; +} + +struct file_operations bkn_proc_link_file_ops = { + owner: THIS_MODULE, + open: bkn_proc_link_open, + read: seq_read, + llseek: seq_lseek, + write: bkn_proc_link_write, + release: single_release, +}; + +/* + * Device Rate Control Proc Read Entry + */ +static int +bkn_proc_rate_show(struct seq_file *m, void *v){ + int unit = 0; + struct list_head *list; + bkn_switch_info_t *sinfo; + int chan; + + list_for_each(list, &_sinfo_list) { + sinfo = (bkn_switch_info_t *)list; + + seq_printf(m, "Rate control (unit %d):\n", unit); + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + seq_printf(m, " Rx%d max rate %8u\n", + chan, sinfo->rx[chan].rate_max); + seq_printf(m, " Rx%d max burst %8u\n", + chan, sinfo->rx[chan].burst_max); + seq_printf(m, " Rx%d rate %8u\n", + chan, sinfo->rx[chan].rate); + seq_printf(m, " Rx%d tokens %8u\n", + chan, sinfo->rx[chan].tokens); + } + + unit++; + } + return 0; +} + +static int +bkn_proc_rate_open(struct inode * inode, struct file * file) { + return single_open(file, bkn_proc_rate_show, NULL); +} + +/* + * Device Rate Control Proc Write Entry + * + * Syntax: + * [:]rx_rate=[,[, is packets/sec for the first Rx DMA channel, + * is packets/sec for the second Rx DMA channel, etc. + * + * Examples: + * rx_rate=5000 + * 0:rx_rate=10000,10000 + * 1:rx_rate=10000,5000 + */ +static ssize_t +bkn_proc_rate_write(struct file *file, const char *buf, + size_t count, loff_t *loff) +{ + bkn_switch_info_t *sinfo; + char rate_str[40]; + char *ptr; + int unit, chan; + + if (count >= sizeof(rate_str)) { + count = sizeof(rate_str) - 1; + } + if (copy_from_user(rate_str, buf, count)) { + return -EFAULT; + } + + unit = simple_strtol(rate_str, NULL, 10); + sinfo = bkn_sinfo_from_unit(unit); + if (sinfo == NULL) { + gprintk("Warning: unknown unit\n"); + return count; + } + + + if ((ptr = strstr(rate_str, "rx_rate=")) != NULL) { + ptr += 7; + chan = 0; + do { + ptr++; + sinfo->rx[chan].rate_max = simple_strtol(ptr, NULL, 10); + } + while ((ptr = strchr(ptr, ',')) != NULL && ++chan < NUM_RX_CHAN); + bkn_rx_rate_config(sinfo); + } else if ((ptr = strstr(rate_str, "rx_burst=")) != NULL) { + ptr += 8; + chan = 0; + do { + ptr++; + sinfo->rx[chan].burst_max = simple_strtol(ptr, NULL, 10); + } + while ((ptr = strchr(ptr, ',')) != NULL && ++chan < NUM_RX_CHAN); + bkn_rx_rate_config(sinfo); + } else { + gprintk("Warning: unknown configuration setting\n"); + } + + return count; +} + +struct file_operations bkn_proc_rate_file_ops = { + owner: THIS_MODULE, + open: bkn_proc_rate_open, + read: seq_read, + llseek: seq_lseek, + write: bkn_proc_rate_write, + release: single_release, +}; + +/* + * Driver DMA Proc Entry + * + * This output can be rather large (> PAGE_SIZE) so we use the + * seq_file interface to do the output. Special header records + * are indicated by a negative DCB index. + */ +typedef struct { + int dev_no; /* Current unit */ + int rx_dma; /* 0: Tx DMA, 1: Rx DMA*/ + int ch_no; /* DMA channel no. (Rx only) */ + int idx; /* DCB index */ +} bkn_seq_dma_iter_t; + +/* From current record, move forward 'pos' records */ +static int +bkn_seq_dma_next_pos(bkn_seq_dma_iter_t *iter, loff_t pos) +{ + while (pos) { + if (iter->rx_dma) { + if (++iter->idx >= MAX_RX_DCBS) { + iter->idx = -1; + if (++iter->ch_no >= NUM_RX_CHAN) { + iter->rx_dma = 0; + iter->ch_no = 0; + iter->dev_no++; + if (bkn_sinfo_from_unit(iter->dev_no) == NULL) { + return -1; + } + } + } + } else { + if (++iter->idx >= MAX_TX_DCBS) { + iter->idx = -1; + iter->rx_dma = 1; + } + } + pos--; + } + return 0; +} + +/* Initialize private data and move to requested start record */ +static void * +bkn_seq_dma_start(struct seq_file *s, loff_t *pos) +{ + bkn_seq_dma_iter_t *iter; + + iter = kmalloc(sizeof(bkn_seq_dma_iter_t), GFP_KERNEL); + if (!iter) { + return NULL; + } + memset(iter, 0, sizeof(*iter)); + iter->idx = -2; + if (bkn_seq_dma_next_pos(iter, *pos) < 0) { + kfree(iter); + return NULL; + } + return iter; +} + +/* Move to next record */ +static void * +bkn_seq_dma_next(struct seq_file *s, void *v, loff_t *pos) +{ + bkn_seq_dma_iter_t *iter = (bkn_seq_dma_iter_t *)v; + void *rv = iter; + + if (bkn_seq_dma_next_pos(iter, 1) < 0) { + return NULL; + } + (*pos)++; + return rv; +} + +/* Release private data */ +static void +bkn_seq_dma_stop(struct seq_file *s, void *v) +{ + if (v) { + kfree(v); + } +} + +/* Print current record */ +static int +bkn_seq_dma_show(struct seq_file *s, void *v) +{ + bkn_seq_dma_iter_t *iter = (bkn_seq_dma_iter_t *)v; + bkn_switch_info_t *sinfo; + uint32_t *dcb = NULL; + int chan; + + sinfo = bkn_sinfo_from_unit(iter->dev_no); + if (sinfo == NULL) { + /* Should not happen */ + return 0; + } + + if (iter->rx_dma == 0) { + if (iter->idx == -2) { + seq_printf(s, "Pending events: 0x%x\n", sinfo->dma_events); + } else if (iter->idx == -1) { + seq_printf(s, + "Tx DCB info (unit %d):\n" + " api: %d\n" + " dirty: %d\n" + " cur: %d\n" + " free: %d\n" + " pause: %s\n", + iter->dev_no, + sinfo->tx.api_active, + sinfo->tx.dirty, + sinfo->tx.cur, + sinfo->tx.free, + netif_queue_stopped(sinfo->dev) ? "yes" : "no"); + } else { + dcb = sinfo->tx.desc[iter->idx].dcb_mem; + } + } else { + if (iter->idx == -1) { + chan = iter->ch_no; + seq_printf(s, + "Rx%d DCB info (unit %d):\n" + " api: %d\n" + " dirty: %d\n" + " cur: %d\n" + " free: %d\n" + " run: %d\n", + chan, iter->dev_no, + sinfo->rx[chan].api_active, + sinfo->rx[chan].dirty, + sinfo->rx[chan].cur, + sinfo->rx[chan].free, + sinfo->rx[chan].running); + } else if (sinfo->rx[iter->ch_no].use_rx_skb) { + dcb = sinfo->rx[iter->ch_no].desc[iter->idx].dcb_mem; + } + } + if (dcb) { + seq_printf(s, " DCB %2d: 0x%08x 0x%08x ... 0x%08x\n", iter->idx, + dcb[0], dcb[1], dcb[sinfo->dcb_wsize - 1]); + } + return 0; +} + +static struct seq_operations bkn_seq_dma_ops = { + .start = bkn_seq_dma_start, + .next = bkn_seq_dma_next, + .stop = bkn_seq_dma_stop, + .show = bkn_seq_dma_show +}; + +static int +bkn_seq_dma_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &bkn_seq_dma_ops); +}; + +static struct file_operations bkn_seq_dma_file_ops = { + .owner = THIS_MODULE, + .open = bkn_seq_dma_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release +}; + +/* + * Device Debug Control Proc Write Entry + * + * Syntax: + * [:]debug= + * + * Where corresponds to the debug module parameter. + * + * Examples: + * debug=0xffff + * 0:debug-0x2000 + */ +static ssize_t +bkn_proc_debug_write(struct file *file, const char *buf, + size_t count, loff_t *loff) +{ + bkn_switch_info_t *sinfo; + char debug_str[40]; + char *ptr; + int unit; + + if (count >= sizeof(debug_str)) { + count = sizeof(debug_str) - 1; + } + if (copy_from_user(debug_str, buf, count)) { + return -EFAULT; + } + + unit = simple_strtol(debug_str, NULL, 10); + sinfo = bkn_sinfo_from_unit(unit); + if (sinfo == NULL) { + gprintk("Warning: unknown unit\n"); + return count; + } + + if ((ptr = strstr(debug_str, "debug=")) != NULL) { + ptr += 6; + debug = simple_strtol(ptr, NULL, 0); + } else { + gprintk("Warning: unknown configuration setting\n"); + } + + return count; +} + +/* + * Driver Debug Proc Entry + */ +static int +bkn_proc_debug_show(struct seq_file *m, void *v){ + int unit = 0; + struct list_head *list; + bkn_switch_info_t *sinfo; + + seq_printf(m, "Configuration:\n"); + seq_printf(m, " debug: 0x%x\n", debug); + seq_printf(m, " mac_addr: %02x:%02x:%02x:%02x:%02x:%02x\n", + bkn_dev_mac[0], bkn_dev_mac[1], bkn_dev_mac[2], + bkn_dev_mac[3], bkn_dev_mac[4], bkn_dev_mac[5]); + seq_printf(m, " rx_buffer_size: %d (0x%x)\n", + rx_buffer_size, rx_buffer_size); + seq_printf(m, " rcpu_mode: %d\n", rcpu_mode); + seq_printf(m, " rcpu_dmac: %02x:%02x:%02x:%02x:%02x:%02x\n", + bkn_rcpu_dmac[0], bkn_rcpu_dmac[1], bkn_rcpu_dmac[2], + bkn_rcpu_dmac[3], bkn_rcpu_dmac[4], bkn_rcpu_dmac[5]); + seq_printf(m, " rcpu_smac: %02x:%02x:%02x:%02x:%02x:%02x\n", + bkn_rcpu_smac[0], bkn_rcpu_smac[1], bkn_rcpu_smac[2], + bkn_rcpu_smac[3], bkn_rcpu_smac[4], bkn_rcpu_smac[5]); + seq_printf(m, " rcpu_ethertype: 0x%x\n", rcpu_ethertype); + seq_printf(m, " rcpu_signature: 0x%x\n", rcpu_signature); + seq_printf(m, " rcpu_vlan: %d\n", rcpu_vlan); + seq_printf(m, " use_rx_skb: %d\n", use_rx_skb); + seq_printf(m, " num_rx_prio: %d\n", num_rx_prio); + seq_printf(m, " check_rcpu_sig: %d\n", check_rcpu_signature); + seq_printf(m, " default_mtu: %d\n", default_mtu); + seq_printf(m, " rx_sync_retry: %d\n", rx_sync_retry); + seq_printf(m, " use_napi: %d\n", use_napi); + seq_printf(m, " napi_weight: %d\n", napi_weight); + seq_printf(m, " basedev_susp: %d\n", basedev_suspend); + seq_printf(m, "Thread states:\n"); + seq_printf(m, " Command thread: %d\n", bkn_cmd_ctrl.state); + seq_printf(m, " Event thread: %d\n", bkn_evt_ctrl.state); + seq_printf(m, "Active IOCTLs:\n"); + seq_printf(m, " Command: %d\n", ioctl_cmd); + seq_printf(m, " Event: %d\n", ioctl_evt); + + list_for_each(list, &_sinfo_list) { + sinfo = (bkn_switch_info_t *)list; + + seq_printf(m, "Device %d:\n", unit); + seq_printf(m, " base_addr: 0x%p\n", sinfo->base_addr); + seq_printf(m, " dev_no: %d\n", sinfo->dev_no); + seq_printf(m, " dcb_type: %d\n", sinfo->dcb_type); + seq_printf(m, " dcb_wsize: %d\n", sinfo->dcb_wsize); + seq_printf(m, " cmic_type: %c\n", sinfo->cmic_type); + seq_printf(m, " irq_mask: 0x%x\n", sinfo->irq_mask); + seq_printf(m, " dma_events: 0x%x\n", sinfo->dma_events); + seq_printf(m, " dcb_dma: 0x%p\n", (void *)sinfo->dcb_dma); + seq_printf(m, " dcb_mem_size: 0x%x\n", sinfo->dcb_mem_size); + seq_printf(m, " rcpu_sig: 0x%x\n", sinfo->rcpu_sig); + seq_printf(m, " napi_poll_mode: %d\n", sinfo->napi_poll_mode); + seq_printf(m, " inst_id: 0x%x\n", sinfo->inst_id); + seq_printf(m, " evt_queue: %d\n", sinfo->evt_idx); + + unit++; + } + + return 0; +} + +static int bkn_proc_debug_open(struct inode * inode, struct file * file) { + return single_open(file, bkn_proc_debug_show, NULL); +} + +struct file_operations bkn_proc_debug_file_ops = { + owner: THIS_MODULE, + open: bkn_proc_debug_open, + read: seq_read, + llseek: seq_lseek, + write: bkn_proc_debug_write, + release: single_release, +}; + +/* + * Device Statistics Proc Entry + */ +static int +bkn_proc_stats_show(struct seq_file *m, void *v){ + int unit = 0; + struct list_head *list, *flist; + bkn_switch_info_t *sinfo; + bkn_filter_t *filter; + int chan; + + + list_for_each(list, &_sinfo_list) { + sinfo = (bkn_switch_info_t *)list; + + seq_printf(m, "Device stats (unit %d):\n", unit); + seq_printf(m, " Interrupts %10u\n", sinfo->interrupts); + seq_printf(m, " Tx packets %10u\n", sinfo->tx.pkts); + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + seq_printf(m, " Rx%d packets %10u\n", + chan, sinfo->rx[chan].pkts); + } + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + if (sinfo->interrupts == 0) { + /* Avoid divide-by-zero */ + seq_printf(m, " Rx%d pkts/intr -\n", chan); + } else { + seq_printf(m, " Rx%d pkts/intr %8u\n", + chan, sinfo->rx[chan].pkts / sinfo->interrupts); + } + } + seq_printf(m, " Timer runs %10u\n", sinfo->timer_runs); + seq_printf(m, " NAPI reruns %10u\n", sinfo->napi_not_done); + + list_for_each(flist, &sinfo->rxpf_list) { + filter = (bkn_filter_t *)flist; + + seq_printf(m, " Filter %d stats:\n", filter->kf.id); + seq_printf(m, " Hits %10lu\n", filter->hits); + } + + unit++; + } + return 0; +} + +static int bkn_proc_stats_open(struct inode * inode, struct file * file) { + return single_open(file, bkn_proc_stats_show, NULL); +} + +/* + * Device Statistics Proc Write Entry + * + * Syntax: + * [:]clear[=all] + * + * Where corresponds to the debug module parameter. + * + * Examples: + * clear + * 0:clear=all + */ +static ssize_t +bkn_proc_stats_write(struct file *file, const char *buf, + size_t count, loff_t *loff) +{ + bkn_switch_info_t *sinfo; + struct list_head *flist; + bkn_filter_t *filter; + char debug_str[40]; + char *ptr; + int unit; + int clear_mask; + int chan; + + if (count >= sizeof(debug_str)) { + count = sizeof(debug_str) - 1; + } + if (copy_from_user(debug_str, buf, count)) { + return -EFAULT; + } + + unit = simple_strtol(debug_str, NULL, 10); + sinfo = bkn_sinfo_from_unit(unit); + if (sinfo == NULL) { + gprintk("Warning: unknown unit\n"); + return count; + } + + clear_mask = 0; + if ((ptr = strstr(debug_str, "clear=")) != NULL) { + ptr += 6; + if (strncmp(ptr, "all", 3) == 0) { + clear_mask = ~0; + } + } else if ((ptr = strstr(debug_str, "clear")) != NULL) { + clear_mask = ~0; + } else { + gprintk("Warning: unknown configuration setting\n"); + } + + if (clear_mask) { + sinfo->tx.pkts = 0; + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + sinfo->rx[chan].pkts = 0; + } + sinfo->interrupts = 0; + sinfo->timer_runs = 0; + sinfo->napi_not_done = 0; + list_for_each(flist, &sinfo->rxpf_list) { + filter = (bkn_filter_t *)flist; + filter->hits = 0; + } + } + + return count; +} + +struct file_operations bkn_proc_stats_file_ops = { + owner: THIS_MODULE, + open: bkn_proc_stats_open, + read: seq_read, + llseek: seq_lseek, + write: bkn_proc_stats_write, + release: single_release, +}; + +/* + * Device Debug Statistics Proc Entry + */ +static int +bkn_proc_dstats_show(struct seq_file *m, void *v){ + int unit = 0; + struct list_head *list; + bkn_switch_info_t *sinfo; + int chan; + + list_for_each(list, &_sinfo_list) { + sinfo = (bkn_switch_info_t *)list; + + seq_printf(m, "Device debug stats (unit %d):\n", unit); + seq_printf(m, " Tx drop no skb %10u\n", + sinfo->tx.pkts_d_no_skb); + seq_printf(m, " Tx drop rcpu encap %10u\n", + sinfo->tx.pkts_d_rcpu_encap); + seq_printf(m, " Tx drop rcpu sig %10u\n", + sinfo->tx.pkts_d_rcpu_sig); + seq_printf(m, " Tx drop rcpu meta %10u\n", + sinfo->tx.pkts_d_rcpu_meta); + seq_printf(m, " Tx drop pad failed %10u\n", + sinfo->tx.pkts_d_pad_fail); + seq_printf(m, " Tx drop no resource %10u\n", + sinfo->tx.pkts_d_dma_resrc); + seq_printf(m, " Tx drop callback %10u\n", + sinfo->tx.pkts_d_callback); + seq_printf(m, " Tx drop no link %10u\n", + sinfo->tx.pkts_d_no_link); + seq_printf(m, " Tx drop oversized %10u\n", + sinfo->tx.pkts_d_over_limit); + seq_printf(m, " Tx suspends %10u\n", + sinfo->tx.suspends); + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + seq_printf(m, " Rx%d filter to api %10u\n", + chan, sinfo->rx[chan].pkts_f_api); + seq_printf(m, " Rx%d filter to netif %10u\n", + chan, sinfo->rx[chan].pkts_f_netif); + seq_printf(m, " Rx%d mirror to api %10u\n", + chan, sinfo->rx[chan].pkts_m_api); + seq_printf(m, " Rx%d mirror to netif %10u\n", + chan, sinfo->rx[chan].pkts_m_netif); + seq_printf(m, " Rx%d drop no skb %10u\n", + chan, sinfo->rx[chan].pkts_d_no_skb); + seq_printf(m, " Rx%d drop no match %10u\n", + chan, sinfo->rx[chan].pkts_d_no_match); + seq_printf(m, " Rx%d drop unkn netif %10u\n", + chan, sinfo->rx[chan].pkts_d_unkn_netif); + seq_printf(m, " Rx%d drop unkn dest %10u\n", + chan, sinfo->rx[chan].pkts_d_unkn_dest); + seq_printf(m, " Rx%d drop callback %10u\n", + chan, sinfo->rx[chan].pkts_d_callback); + seq_printf(m, " Rx%d drop no link %10u\n", + chan, sinfo->rx[chan].pkts_d_no_link); + seq_printf(m, " Rx%d sync error %10u\n", + chan, sinfo->rx[chan].sync_err); + seq_printf(m, " Rx%d sync retry %10u\n", + chan, sinfo->rx[chan].sync_retry); + seq_printf(m, " Rx%d sync maxloop %10u\n", + chan, sinfo->rx[chan].sync_maxloop); + seq_printf(m, " Rx%d drop no buffer %10u\n", + chan, sinfo->rx[chan].pkts_d_no_api_buf); + } + unit++; + } + return 0; +} + +static int bkn_proc_dstats_open(struct inode * inode, struct file * file) { + return single_open(file, bkn_proc_dstats_show, NULL); +} + +/* + * Device Debug Statistics Proc Write Entry + * + * Syntax: + * [:]clear[=all|tx|rx[]] + * + * Where corresponds to the debug module parameter. + * + * Examples: + * clear + * 0:clear=rx1 + */ +static ssize_t +bkn_proc_dstats_write(struct file *file, const char *buf, + size_t count, loff_t *loff) +{ + bkn_switch_info_t *sinfo; + char debug_str[40]; + char *ptr; + int unit; + int clear_mask; + int chan; + + if (count >= sizeof(debug_str)) { + count = sizeof(debug_str) - 1; + } + if (copy_from_user(debug_str, buf, count)) { + return -EFAULT; + } + + unit = simple_strtol(debug_str, NULL, 10); + sinfo = bkn_sinfo_from_unit(unit); + if (sinfo == NULL) { + gprintk("Warning: unknown unit\n"); + return count; + } + + clear_mask = 0; + if ((ptr = strstr(debug_str, "clear=")) != NULL) { + ptr += 6; + if (strncmp(ptr, "all", 3) == 0) { + clear_mask = ~0; + } else if (strncmp(ptr, "dev", 3) == 0) { + clear_mask = 0x20; + } else if (strncmp(ptr, "tx", 2) == 0) { + clear_mask = 0x10; + } else if (strncmp(ptr, "rx0", 3) == 0) { + clear_mask = (1 << 0); + } else if (strncmp(ptr, "rx1", 3) == 0) { + clear_mask = (1 << 1); + } else if (strncmp(ptr, "rx", 2) == 0) { + clear_mask = 0xf; + } + } else if ((ptr = strstr(debug_str, "clear")) != NULL) { + clear_mask = ~0; + } else { + gprintk("Warning: unknown configuration setting\n"); + } + + /* Tx counters */ + if (clear_mask & 0x10) { + sinfo->tx.pkts_d_no_skb = 0; + sinfo->tx.pkts_d_rcpu_encap = 0; + sinfo->tx.pkts_d_rcpu_sig = 0; + sinfo->tx.pkts_d_rcpu_meta = 0; + sinfo->tx.pkts_d_pad_fail = 0; + sinfo->tx.pkts_d_over_limit = 0; + sinfo->tx.pkts_d_dma_resrc = 0; + sinfo->tx.suspends = 0; + } + /* Rx counters */ + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + if (clear_mask & (1 << chan)) { + sinfo->rx[chan].pkts_f_api = 0; + sinfo->rx[chan].pkts_f_netif = 0; + sinfo->rx[chan].pkts_m_api = 0; + sinfo->rx[chan].pkts_m_netif = 0; + sinfo->rx[chan].pkts_d_no_skb = 0; + sinfo->rx[chan].pkts_d_no_match = 0; + sinfo->rx[chan].pkts_d_unkn_netif = 0; + sinfo->rx[chan].pkts_d_unkn_dest = 0; + sinfo->rx[chan].pkts_d_no_api_buf = 0; + sinfo->rx[chan].sync_err = 0; + sinfo->rx[chan].sync_retry = 0; + sinfo->rx[chan].sync_maxloop = 0; + } + } + + return count; +} + +struct file_operations bkn_proc_dstats_file_ops = { + owner: THIS_MODULE, + open: bkn_proc_dstats_open, + read: seq_read, + llseek: seq_lseek, + write: bkn_proc_dstats_write, + release: single_release, +}; + +static int +bkn_proc_init(void) +{ + struct proc_dir_entry *entry; + + PROC_CREATE(entry, "link", 0666, bkn_proc_root, &bkn_proc_link_file_ops); + if (entry == NULL) { + return -1; + } + PROC_CREATE(entry, "rate", 0666, bkn_proc_root, &bkn_proc_rate_file_ops); + if (entry == NULL) { + return -1; + } + PROC_CREATE(entry, "dma", 0, bkn_proc_root, &bkn_seq_dma_file_ops); + if (entry == NULL) { + return -1; + } + PROC_CREATE(entry, "debug", 0666, bkn_proc_root, &bkn_proc_debug_file_ops); + if (entry == NULL) { + return -1; + } + PROC_CREATE(entry, "stats", 0666, bkn_proc_root, &bkn_proc_stats_file_ops); + if (entry == NULL) { + return -1; + } + PROC_CREATE(entry, "dstats", 0666, bkn_proc_root, &bkn_proc_dstats_file_ops); + if (entry == NULL) { + return -1; + } + + return 0; +} + +static int +bkn_proc_cleanup(void) +{ + remove_proc_entry("link", bkn_proc_root); + remove_proc_entry("rate", bkn_proc_root); + remove_proc_entry("dma", bkn_proc_root); + remove_proc_entry("debug", bkn_proc_root); + remove_proc_entry("stats", bkn_proc_root); + remove_proc_entry("dstats", bkn_proc_root); + return 0; +} + +/* + * Generic module functions + */ + +static int +_pprint(void) +{ + pprintf("Broadcom BCM KNET Linux Network Driver\n"); + + return 0; +} + +static int +bkn_knet_dma_info(kcom_msg_dma_info_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + bkn_dcb_chain_t *dcb_chain, *dcb_chain_end; + unsigned long flags; + int chan = API_RX_CHAN; + dma_addr_t dcb_dma; + int woffset; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + dcb_chain = kmalloc(sizeof(*dcb_chain), GFP_KERNEL); + if (dcb_chain == NULL) { + gprintk("Fatal error: No memory for dcb_chain\n"); + kmsg->hdr.status = KCOM_E_RESOURCE; + return sizeof(kcom_msg_hdr_t); + } + memset(dcb_chain, 0, sizeof(*dcb_chain)); + dcb_chain->dcb_cnt = kmsg->dma_info.cnt; + dcb_chain->dcb_dma = kmsg->dma_info.data.dcb_start; + dcb_chain->dcb_mem = kernel_bde->p2l(sinfo->dev_no, + dcb_chain->dcb_dma); + + if (kmsg->dma_info.type == KCOM_DMA_INFO_T_TX_DCB) { + + spin_lock_irqsave(&sinfo->lock, flags); + + /* Hold back packets from kernel */ + bkn_suspend_tx(sinfo); + + list_add_tail(&dcb_chain->list, &sinfo->tx.api_dcb_list); + + /* Handle for Continuous DMA mode */ + if (CDMA_CH(sinfo, XGS_DMA_TX_CHAN)) { + woffset = (dcb_chain->dcb_cnt - 1) * sinfo->dcb_wsize + 1; + if ((dcb_chain->dcb_mem[woffset] & ((1 << 18) | (1 << 16))) != 0x50000) { + gprintk("No suitable API DCB chain for Continuous DMA mode\n"); + kfree(dcb_chain); + kmsg->hdr.status = KCOM_E_PARAM; + spin_unlock_irqrestore(&sinfo->lock, flags); + return sizeof(kcom_msg_hdr_t); + } + dcb_chain_end = sinfo->tx.api_dcb_chain_end; + if (dcb_chain_end != NULL) { + /* Stitch this chain */ + woffset = (dcb_chain_end->dcb_cnt - 1) * sinfo->dcb_wsize; + dcb_chain_end->dcb_mem[woffset] = dcb_chain->dcb_dma; + } + sinfo->tx.api_dcb_chain_end = dcb_chain; + if (sinfo->tx.api_active) { + /* Set new halt location */ + woffset = (dcb_chain->dcb_cnt - 1) * sinfo->dcb_wsize; + dcb_dma = dcb_chain->dcb_dma + woffset * sizeof(uint32_t); + /* DMA run to the new halt location */ + bkn_cdma_goto(sinfo, XGS_DMA_TX_CHAN, dcb_dma); + } + } + + if (sinfo->tx.free == MAX_TX_DCBS && + !sinfo->tx.api_active && + !sinfo->basedev_suspended) { + bkn_api_tx(sinfo); + } + + spin_unlock_irqrestore(&sinfo->lock, flags); + + } else if (kmsg->dma_info.type == KCOM_DMA_INFO_T_RX_DCB) { + + spin_lock_irqsave(&sinfo->lock, flags); + + list_add_tail(&dcb_chain->list, &sinfo->rx[chan].api_dcb_list); + + /* Handle for Continuous DMA mode */ + if (CDMA_CH(sinfo, XGS_DMA_RX_CHAN + chan)) { + woffset = (dcb_chain->dcb_cnt - 1) * sinfo->dcb_wsize + 1; + if ((dcb_chain->dcb_mem[woffset] & ((1 << 18) | (1 << 16))) != 0x50000) { + gprintk("No suitable API DCB chain for Continuous DMA mode\n"); + kfree(dcb_chain); + kmsg->hdr.status = KCOM_E_PARAM; + spin_unlock_irqrestore(&sinfo->lock, flags); + return sizeof(kcom_msg_hdr_t); + } + dcb_chain_end = sinfo->rx[chan].api_dcb_chain_end; + if (dcb_chain_end != NULL) { + /* Stitch this chain */ + woffset = (dcb_chain_end->dcb_cnt - 1) * sinfo->dcb_wsize; + dcb_chain_end->dcb_mem[woffset] = dcb_chain->dcb_dma; + } + sinfo->rx[chan].api_dcb_chain_end = dcb_chain; + if (!sinfo->rx[chan].use_rx_skb) { + /* Set new halt location */ + woffset = (dcb_chain->dcb_cnt - 1) * sinfo->dcb_wsize; + dcb_dma = dcb_chain->dcb_dma + woffset * sizeof(uint32_t); + /* DMA run to the new halt location */ + bkn_cdma_goto(sinfo, XGS_DMA_RX_CHAN + chan, dcb_dma); + } + } + + if (sinfo->rx[chan].api_active == 0) { + bkn_api_rx_restart(sinfo); + } + + spin_unlock_irqrestore(&sinfo->lock, flags); + + } else { + DBG_DCB(("Unknown DCB_INFO type (%d).\n", kmsg->dma_info.type)); + kfree(dcb_chain); + kmsg->hdr.status = KCOM_E_PARAM; + } + + return sizeof(kcom_msg_hdr_t); +} + +static int +bkn_create_inst(uint32 inst_id) +{ + bkn_switch_info_t *sinfo; + bkn_evt_resource_t *evt; + unsigned long flags; + int i, evt_idx = -1; + + /* multiple instance mode */ + for (i = 0; i < kernel_bde->num_devices(BDE_ALL_DEVICES); i ++) { + evt = &_bkn_evt[i]; + if (evt->inst_id == inst_id) { + evt_idx = i; + DBG_INST(("%s evt_idx %d inst_id 0x%x\n",__FUNCTION__, i, inst_id)); + break; + } + if ((_bkn_multi_inst == 0) || (evt->inst_id == 0)) { + _bkn_multi_inst ++; + evt_idx = i; + init_waitqueue_head(&evt->evt_wq); + evt->inst_id = inst_id; + DBG_INST(("%s evt_idx %d inst_id 0x%x\n",__FUNCTION__, i, inst_id)); + break; + } + } + + if (evt_idx == -1) { + DBG_WARN(("Run out the event queue resource !\n")); + return -1; + } + for (i = 0; i < kernel_bde->num_devices(BDE_ALL_DEVICES); i ++) { + if (inst_id & (1 << i)) { + sinfo = bkn_sinfo_from_unit(i); + spin_lock_irqsave(&sinfo->lock, flags); + sinfo->evt_idx = evt_idx; + spin_unlock_irqrestore(&sinfo->lock, flags); + DBG_INST(("%s d(%d) evt_idx %d \n",__FUNCTION__, i, evt_idx)); + } + } + return 0; +} + +/* + * Device reprobe driven by application to check if new device is probed or + * existed device is changed after inserting KNET module. + */ +static int +bkn_knet_dev_reprobe(void) +{ + bkn_switch_info_t *sinfo; + int i; + for (i = 0; i < kernel_bde->num_devices(BDE_ALL_DEVICES); i++) { + sinfo = bkn_sinfo_from_unit(i); + if (sinfo == NULL ) { + /* New device found after re-probe. */ + if (bkn_knet_dev_init(i) < 0) { + return -1; + } + } else { + /* Existed device reinit after re-probe. */ + if (bkn_knet_dev_reinit(i) < 0) { + return -1; + } + } + } + return 0; +} + +/* Assign the inst_id and evt_idx */ +static int +bkn_knet_dev_inst_set(kcom_msg_version_t *kmsg) +{ + bkn_switch_info_t *sinfo; + int d = kmsg->hdr.unit; + uint32 inst = 0; + unsigned long flags; + struct list_head *list; + + sinfo = bkn_sinfo_from_unit(d); + lkbde_dev_instid_get(d, &inst); + + spin_lock_irqsave(&sinfo->lock, flags); + if (sinfo->inst_id != inst) { + /* Instance database changed, reinit the inst_id */ + sinfo->inst_id = 0; + sinfo->evt_idx = -1; + } + spin_unlock_irqrestore(&sinfo->lock, flags); + + if (inst) { + if (sinfo->inst_id == 0){ + if (bkn_create_inst(inst) != 0) { + return -1; + } + } + spin_lock_irqsave(&sinfo->lock, flags); + sinfo->inst_id = inst; + spin_unlock_irqrestore(&sinfo->lock, flags); + } else { + /* legacy mode */ + list_for_each(list, &_sinfo_list) { + sinfo = (bkn_switch_info_t *)list; + spin_lock_irqsave(&sinfo->lock, flags); + sinfo->evt_idx = 0; + sinfo->inst_id = 0; + spin_unlock_irqrestore(&sinfo->lock, flags); + } + } + return 0; +} + +static int +bkn_knet_version(kcom_msg_version_t *kmsg, int len) +{ + /* Support pci hot plug and multiple instance */ + if ((bkn_knet_dev_reprobe() < 0) || + (bkn_knet_dev_inst_set(kmsg) < 0)){ + kmsg->hdr.status = KCOM_E_RESOURCE; + return sizeof(kcom_msg_version_t); + } + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + kmsg->version = KCOM_VERSION; + kmsg->netif_max = KCOM_NETIF_MAX; + kmsg->filter_max = KCOM_FILTER_MAX; + + return sizeof(kcom_msg_version_t); +} + +static int +bkn_knet_hw_reset(kcom_msg_hw_reset_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + unsigned long flags; + int chan; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + if (kmsg->channels == 0) { + /* Clean all if no channels specified */ + bkn_dma_abort(sinfo); + bkn_clean_dcbs(sinfo); + } else { + if (kmsg->channels & (1 << XGS_DMA_TX_CHAN)) { + bkn_dma_abort_tx(sinfo); + bkn_clean_tx_dcbs(sinfo); + } + for (chan = 0; chan < NUM_RX_CHAN; chan++) { + if (kmsg->channels & (1 << (XGS_DMA_RX_CHAN + chan))) { + bkn_dma_abort_rx(sinfo, chan); + bkn_clean_rx_dcbs(sinfo, chan); + } + } + } + + spin_unlock_irqrestore(&sinfo->lock, flags); + + return sizeof(kcom_msg_hdr_t); +} + +static int +bkn_knet_hw_init(kcom_msg_hw_init_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + unsigned long flags; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + DBG_DCB(("DCB size %d, type %d\n", kmsg->dcb_size, kmsg->dcb_type)); + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + /* Config Continuous DMA mode */ + sinfo->cdma_channels = kmsg->cdma_channels; + + /* First time called we need to allocate DCBs */ + sinfo->dcb_type = kmsg->dcb_type; + sinfo->dcb_wsize = BYTES2WORDS(kmsg->dcb_size); + if (sinfo->dcb_mem == NULL) { + if (bkn_alloc_dcbs(sinfo) < 0) { + kmsg->hdr.status = KCOM_E_RESOURCE; + return sizeof(kcom_msg_hdr_t); + } + bkn_init_dcbs(sinfo); + } + + /* Ensure that we restart properly */ + bkn_dma_abort(sinfo); + bkn_clean_dcbs(sinfo); + + if (basedev_suspend) { + if (!netif_running(sinfo->dev)) { + sinfo->basedev_suspended = 1; + } + } + + bkn_dma_init(sinfo); + + spin_unlock_irqrestore(&sinfo->lock, flags); + + return sizeof(kcom_msg_hdr_t); +} + +static int +bkn_knet_detach(kcom_msg_detach_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + unsigned long flags; + bkn_evt_resource_t *evt; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + /* Create dummy event to unblock pending IOCTL */ + sinfo->dma_events |= KCOM_DMA_INFO_F_TX_DONE; + evt = &_bkn_evt[sinfo->evt_idx]; + evt->evt_wq_put++; + wake_up_interruptible(&evt->evt_wq); + + spin_unlock_irqrestore(&sinfo->lock, flags); + + /* Ensure that we return a valid unit number */ + kmsg->hdr.unit = sinfo->dev_no; + + return sizeof(kcom_msg_detach_t); +} + +static int +bkn_knet_netif_create(kcom_msg_netif_create_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + struct net_device *dev; + struct list_head *list; + bkn_priv_t *priv, *lpriv; + unsigned long flags; + int found, id; + uint8 *ma; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + switch (kmsg->netif.type) { + case KCOM_NETIF_T_VLAN: + case KCOM_NETIF_T_PORT: + case KCOM_NETIF_T_META: + break; + default: + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + ma = kmsg->netif.macaddr; + if ((ma[0] | ma[1] | ma[2] | ma[3] | ma[4] | ma[5]) == 0) { + bkn_dev_mac[5]++; + ma = bkn_dev_mac; + } + if ((dev = bkn_init_ndev(ma, kmsg->netif.name)) == NULL) { + kmsg->hdr.status = KCOM_E_RESOURCE; + return sizeof(kcom_msg_hdr_t); + } + priv = netdev_priv(dev); + priv->dev = dev; + priv->sinfo = sinfo; + priv->type = kmsg->netif.type; + priv->vlan = kmsg->netif.vlan; + if (priv->type == KCOM_NETIF_T_PORT) { + priv->port = kmsg->netif.port; + memcpy(priv->itmh, kmsg->netif.itmh, 4); + priv->qnum = kmsg->netif.qnum; + } else { + if ((device_is_dune(sinfo)) && (priv->type == KCOM_NETIF_T_VLAN)) { + /* set port as SSP to PTCH */ + priv->port = kmsg->netif.port; + priv->qnum = kmsg->netif.qnum; + } + else { + priv->port = -1; + } + } + priv->flags = kmsg->netif.flags; + priv->cb_user_data = kmsg->netif.cb_user_data; + + /* Force RCPU encapsulation if rcpu_mode */ + if (rcpu_mode) { + priv->flags |= KCOM_NETIF_F_RCPU_ENCAP; + DBG_RCPU(("RCPU auto-enabled\n")); + } + + /* Prevent (incorrect) compiler warning */ + lpriv = NULL; + + spin_lock_irqsave(&sinfo->lock, flags); + + /* + * We insert network interfaces sorted by ID. + * In case an interface is destroyed, we reuse the ID + * the next time an interface is created. + */ + found = 0; + id = 1; + list_for_each(list, &sinfo->ndev_list) { + lpriv = (bkn_priv_t *)list; + if (id < lpriv->id) { + found = 1; + break; + } + id = lpriv->id + 1; + } + priv->id = id; + if (found) { + /* Replace previously removed interface */ + list_add_tail(&priv->list, &lpriv->list); + } else { + /* No holes - add to end of list */ + list_add_tail(&priv->list, &sinfo->ndev_list); + } + + if (id < sinfo->ndev_max) { + DBG_NDEV(("Add netif ID %d to table\n", id)); + sinfo->ndevs[id] = dev; + } else { + int ndev_max = sinfo->ndev_max + NDEVS_CHUNK; + int size = ndev_max * sizeof(struct net_device *); + void *ndevs = kmalloc(size, GFP_ATOMIC); + if (ndevs != NULL) { + DBG_NDEV(("Reallocate netif table for ID %d\n", id)); + memset(ndevs, 0, size); + if (sinfo->ndevs != NULL) { + size = sinfo->ndev_max * sizeof(struct net_device *); + memcpy(ndevs, sinfo->ndevs, size); + kfree(sinfo->ndevs); + } + sinfo->ndevs = ndevs; + sinfo->ndev_max = ndev_max; + sinfo->ndevs[id] = dev; + } + } + + spin_unlock_irqrestore(&sinfo->lock, flags); + + DBG_VERB(("Assigned ID %d to Ethernet device %s\n", + priv->id, dev->name)); + + kmsg->netif.id = priv->id; + memcpy(kmsg->netif.macaddr, dev->dev_addr, 6); + memcpy(kmsg->netif.name, dev->name, KCOM_NETIF_NAME_MAX - 1); + + return sizeof(*kmsg); +} + +static int +bkn_knet_netif_destroy(kcom_msg_netif_destroy_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + struct net_device *dev; + bkn_priv_t *priv; + struct list_head *list; + unsigned long flags; + int found; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + found = 0; + list_for_each(list, &sinfo->ndev_list) { + priv = (bkn_priv_t *)list; + if (kmsg->hdr.id == priv->id) { + found = 1; + break; + } + } + + if (!found) { + spin_unlock_irqrestore(&sinfo->lock, flags); + kmsg->hdr.status = KCOM_E_NOT_FOUND; + return sizeof(kcom_msg_hdr_t); + } + + list_del(&priv->list); + + if (priv->id < sinfo->ndev_max) { + sinfo->ndevs[priv->id] = NULL; + } + + spin_unlock_irqrestore(&sinfo->lock, flags); + + dev = priv->dev; + DBG_VERB(("Removing virtual Ethernet device %s (%d).\n", + dev->name, priv->id)); + unregister_netdev(dev); + free_netdev(dev); + + return sizeof(kcom_msg_hdr_t); +} + +static int +bkn_knet_netif_list(kcom_msg_netif_list_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + bkn_priv_t *priv; + struct list_head *list; + unsigned long flags; + int idx; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + idx = 0; + list_for_each(list, &sinfo->ndev_list) { + if (idx >= KCOM_NETIF_MAX) { + DBG_WARN(("Too many network interfaces to list (max %d).\n", + KCOM_NETIF_MAX)); + break; + } + priv = (bkn_priv_t *)list; + kmsg->id[idx] = priv->id; + idx++; + } + kmsg->ifcnt = idx; + + spin_unlock_irqrestore(&sinfo->lock, flags); + + return sizeof(*kmsg) - sizeof(kmsg->id) + (idx * sizeof(kmsg->id[0])); +} + +static int +bkn_knet_netif_get(kcom_msg_netif_get_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + bkn_priv_t *priv; + unsigned long flags; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + priv = bkn_netif_lookup(sinfo, kmsg->hdr.id); + + if (priv == NULL) { + spin_unlock_irqrestore(&sinfo->lock, flags); + kmsg->hdr.status = KCOM_E_NOT_FOUND; + return sizeof(kcom_msg_hdr_t); + } + + memcpy(kmsg->netif.macaddr, priv->dev->dev_addr, 6); + memcpy(kmsg->netif.name, priv->dev->name, KCOM_NETIF_NAME_MAX - 1); + kmsg->netif.vlan = priv->vlan; + kmsg->netif.type = priv->type; + kmsg->netif.id = priv->id; + kmsg->netif.flags = priv->flags; + + if (priv->port < 0) { + kmsg->netif.port = 0; + } else { + kmsg->netif.port = priv->port; + } + kmsg->netif.qnum = priv->qnum; + + spin_unlock_irqrestore(&sinfo->lock, flags); + + return sizeof(*kmsg); +} + +static int +bkn_knet_filter_create(kcom_msg_filter_create_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + struct list_head *list; + bkn_filter_t *filter, *lfilter; + unsigned long flags; + int found, id; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + switch (kmsg->filter.type) { + case KCOM_FILTER_T_RX_PKT: + break; + default: + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + /* + * Find available ID + */ + found = 1; + id = 0; + while (found && ++id < KCOM_FILTER_MAX) { + found = 0; + list_for_each(list, &sinfo->rxpf_list) { + lfilter = (bkn_filter_t *)list; + if (id == lfilter->kf.id) { + found = 1; + break; + } + } + } + if (found) { + /* Too many filters */ + spin_unlock_irqrestore(&sinfo->lock, flags); + kmsg->hdr.status = KCOM_E_RESOURCE; + return sizeof(kcom_msg_hdr_t); + } + + filter = kmalloc(sizeof(*filter), GFP_ATOMIC); + if (filter == NULL) { + spin_unlock_irqrestore(&sinfo->lock, flags); + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + memset(filter, 0, sizeof(*filter)); + memcpy(&filter->kf, &kmsg->filter, sizeof(filter->kf)); + filter->kf.id = id; + + /* Add according to priority */ + found = 0; + list_for_each(list, &sinfo->rxpf_list) { + lfilter = (bkn_filter_t *)list; + if (filter->kf.priority < lfilter->kf.priority) { + list_add_tail(&filter->list, &lfilter->list); + found = 1; + break; + } + } + if (!found) { + list_add_tail(&filter->list, &sinfo->rxpf_list); + } + + kmsg->filter.id = filter->kf.id; + + spin_unlock_irqrestore(&sinfo->lock, flags); + + DBG_VERB(("Created filter ID %d (%s).\n", + filter->kf.id, filter->kf.desc)); + + return len; +} + +static int +bkn_knet_filter_destroy(kcom_msg_filter_destroy_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + bkn_filter_t *filter; + struct list_head *list; + unsigned long flags; + int found; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + found = 0; + list_for_each(list, &sinfo->rxpf_list) { + filter = (bkn_filter_t *)list; + if (kmsg->hdr.id == filter->kf.id) { + found = 1; + break; + } + } + + if (!found) { + spin_unlock_irqrestore(&sinfo->lock, flags); + kmsg->hdr.status = KCOM_E_NOT_FOUND; + return sizeof(kcom_msg_hdr_t); + } + + list_del(&filter->list); + + spin_unlock_irqrestore(&sinfo->lock, flags); + + DBG_VERB(("Removing filter ID %d.\n", filter->kf.id)); + kfree(filter); + + return sizeof(kcom_msg_hdr_t); +} + +static int +bkn_knet_filter_list(kcom_msg_filter_list_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + bkn_filter_t *filter; + struct list_head *list; + unsigned long flags; + int idx; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + idx = 0; + list_for_each(list, &sinfo->rxpf_list) { + if (idx >= KCOM_FILTER_MAX) { + DBG_WARN(("Too many filters to list (max %d).\n", + KCOM_FILTER_MAX)); + break; + } + filter = (bkn_filter_t *)list; + kmsg->id[idx] = filter->kf.id; + idx++; + } + kmsg->fcnt = idx; + + spin_unlock_irqrestore(&sinfo->lock, flags); + + return sizeof(*kmsg) - sizeof(kmsg->id) + (idx * sizeof(kmsg->id[0])); +} + +static int +bkn_knet_filter_get(kcom_msg_filter_get_t *kmsg, int len) +{ + bkn_switch_info_t *sinfo; + bkn_filter_t *filter; + struct list_head *list; + unsigned long flags; + int found; + + kmsg->hdr.type = KCOM_MSG_TYPE_RSP; + + sinfo = bkn_sinfo_from_unit(kmsg->hdr.unit); + if (sinfo == NULL) { + kmsg->hdr.status = KCOM_E_PARAM; + return sizeof(kcom_msg_hdr_t); + } + + spin_lock_irqsave(&sinfo->lock, flags); + + found = 0; + list_for_each(list, &sinfo->rxpf_list) { + filter = (bkn_filter_t *)list; + if (kmsg->hdr.id == filter->kf.id) { + found = 1; + break; + } + } + + if (!found) { + spin_unlock_irqrestore(&sinfo->lock, flags); + kmsg->hdr.status = KCOM_E_NOT_FOUND; + return sizeof(kcom_msg_hdr_t); + } + + memcpy(&kmsg->filter, &filter->kf, sizeof(kmsg->filter)); + + spin_unlock_irqrestore(&sinfo->lock, flags); + + return sizeof(*kmsg); +} + +static int +bkn_knet_dbg_pkt_set(kcom_msg_dbg_pkt_set_t *kmsg, int len) +{ + dbg_pkt_enable = kmsg->enable; + return sizeof(kcom_msg_dbg_pkt_set_t); +} + +static int +bkn_knet_dbg_pkt_get(kcom_msg_dbg_pkt_get_t *kmsg, int len) +{ + kmsg->value = dbg_pkt_enable; + return sizeof(kcom_msg_dbg_pkt_get_t); +} + +static int +bkn_handle_cmd_req(kcom_msg_t *kmsg, int len) +{ + /* Silently drop events and unrecognized message types */ + if (kmsg->hdr.type != KCOM_MSG_TYPE_CMD) { + if (kmsg->hdr.opcode == KCOM_M_STRING) { + DBG_VERB(("Debug string: '%s'\n", kmsg->string.val)); + return 0; + } + DBG_WARN(("Unsupported message (type=%d, opcode=%d)\n", + kmsg->hdr.type, kmsg->hdr.opcode)); + return 0; + } + + switch (kmsg->hdr.opcode) { + case KCOM_M_DMA_INFO: + DBG_CMD(("KCOM_M_DMA_INFO\n")); + /* Packet buffer */ + len = bkn_knet_dma_info(&kmsg->dma_info, len); + break; + case KCOM_M_VERSION: + DBG_CMD(("KCOM_M_VERSION\n")); + /* Return procotol version */ + len = bkn_knet_version(&kmsg->version, len); + break; + case KCOM_M_HW_RESET: + DBG_CMD(("KCOM_M_HW_RESET\n")); + /* Shut down DMA and release buffers */ + len = bkn_knet_hw_reset(&kmsg->hw_reset, len); + break; + case KCOM_M_HW_INIT: + DBG_CMD(("KCOM_M_HW_INIT\n")); + /* Initialize DMA */ + len = bkn_knet_hw_init(&kmsg->hw_init, len); + break; + case KCOM_M_DETACH: + DBG_CMD(("KCOM_M_DETACH\n")); + /* Detach kernel module */ + len = bkn_knet_detach(&kmsg->detach, len); + break; + case KCOM_M_NETIF_CREATE: + DBG_CMD(("KCOM_M_NETIF_CREATE\n")); + /* Create network interface */ + len = bkn_knet_netif_create(&kmsg->netif_create, len); + break; + case KCOM_M_NETIF_DESTROY: + DBG_CMD(("KCOM_M_NETIF_DESTROY\n")); + /* Destroy network interface */ + len = bkn_knet_netif_destroy(&kmsg->netif_destroy, len); + break; + case KCOM_M_NETIF_LIST: + DBG_CMD(("KCOM_M_NETIF_LIST\n")); + /* Return list of IDs of installed network interfaces */ + len = bkn_knet_netif_list(&kmsg->netif_list, len); + break; + case KCOM_M_NETIF_GET: + DBG_CMD(("KCOM_M_NETIF_GET\n")); + /* Return network interface info */ + len = bkn_knet_netif_get(&kmsg->netif_get, len); + break; + case KCOM_M_FILTER_CREATE: + DBG_CMD(("KCOM_M_FILTER_CREATE\n")); + /* Create packet filter */ + len = bkn_knet_filter_create(&kmsg->filter_create, len); + break; + case KCOM_M_FILTER_DESTROY: + DBG_CMD(("KCOM_M_FILTER_DESTROY\n")); + /* Destroy packet filter */ + len = bkn_knet_filter_destroy(&kmsg->filter_destroy, len); + break; + case KCOM_M_FILTER_LIST: + DBG_CMD(("KCOM_M_FILTER_LIST\n")); + /* Return list of IDs of installed packet filters */ + len = bkn_knet_filter_list(&kmsg->filter_list, len); + break; + case KCOM_M_FILTER_GET: + DBG_CMD(("KCOM_M_FILTER_GET\n")); + /* Return packet filter info */ + len = bkn_knet_filter_get(&kmsg->filter_get, len); + break; + case KCOM_M_DBGPKT_SET: + DBG_CMD(("KCOM_M_DBGPKT_SET\n")); + /* Set debugging packet function */ + len = bkn_knet_dbg_pkt_set(&kmsg->dbg_pkt_set, len); + break; + case KCOM_M_DBGPKT_GET: + DBG_CMD(("KCOM_M_DBGPKT_GET\n")); + /* Get debugging packet function info */ + len = bkn_knet_dbg_pkt_get(&kmsg->dbg_pkt_get, len); + break; + default: + DBG_WARN(("Unsupported command (type=%d, opcode=%d)\n", + kmsg->hdr.type, kmsg->hdr.opcode)); + kmsg->hdr.opcode = 0; + len = sizeof(kcom_msg_hdr_t); + break; + } + return len; +} + +static int +bkn_cmd_thread(void *context) +{ + bkn_thread_ctrl_t *tc = (bkn_thread_ctrl_t *)context; + kcom_msg_t kmsg; + unsigned int len, rlen; + + bkn_thread_boot(tc); + + DBG_VERB(("Command thread starting\n")); + tc->state = 1; + while (!bkn_thread_should_stop(tc)) { + len = sizeof(kmsg); + tc->state = 2; + if (PROXY_RECV(KCOM_CHAN_KNET, &kmsg, &len) >= 0) { + DBG_VERB(("Received %d bytes from KCOM_CHAN_CMD\n", len)); + tc->state = 3; + rlen = bkn_handle_cmd_req(&kmsg, len); + tc->state = 4; + if (rlen > 0) { + PROXY_SEND(KCOM_CHAN_KNET, &kmsg, rlen); + } + } else { + /* Thread interrupted */ + bkn_sleep(1); + } + } + DBG_VERB(("Command thread done\n")); + + bkn_thread_exit(tc); + return 0; +} + +static int +bkn_get_next_dma_event(kcom_msg_dma_info_t *kmsg) +{ + static int last_dev_no = 0; + bkn_switch_info_t *sinfo; + unsigned long flags; + int dev_no, dev_evt; + bkn_evt_resource_t *evt; + + dev_evt = kmsg->hdr.unit; + sinfo = bkn_sinfo_from_unit(dev_evt); + if (sinfo == NULL) { + /* The device is not probed or initialized yet.*/ + return 0; + } + if (sinfo->evt_idx == -1) { + /* Event queue is not ready yet */ + return 0; + } + + DBG_INST(("%s dev %d evt_idx %d\n",__FUNCTION__, dev_evt, sinfo->evt_idx)); + evt = &_bkn_evt[sinfo->evt_idx]; + dev_no = last_dev_no = dev_evt; + while (1) { + dev_no++; + sinfo = bkn_sinfo_from_unit(dev_no); + if (sinfo == NULL) { + dev_no = 0; + sinfo = bkn_sinfo_from_unit(dev_no); + } + + if (sinfo && (sinfo->inst_id != 0) && + ((sinfo->inst_id & (1 << dev_evt)) == 0)) { + DBG_INST((" %s skip dev(%d)\n",__FUNCTION__,dev_evt)); + continue; + } + + if (sinfo && sinfo->dma_events) { + DBG_EVT(("Next DMA events (0x%08x)\n", sinfo->dma_events)); + kmsg->hdr.unit = sinfo->dev_no; + + spin_lock_irqsave(&sinfo->lock, flags); + kmsg->dma_info.flags = sinfo->dma_events; + sinfo->dma_events = 0; + spin_unlock_irqrestore(&sinfo->lock, flags); + + last_dev_no = dev_no; + break; + } + + if (dev_no == last_dev_no) { + DBG_INST(("wait queue index %d\n",sinfo->evt_idx)); + wait_event_interruptible(evt->evt_wq, + evt->evt_wq_get != evt->evt_wq_put); + DBG_VERB(("Event thread wakeup\n")); + + /* Thread interrupted */ + if (signal_pending(current)) { + return 0; + } + + evt->evt_wq_get = evt->evt_wq_put; + } + } + return sizeof(*kmsg); +} + +static int +bkn_evt_thread(void *context) +{ + bkn_thread_ctrl_t *tc = (bkn_thread_ctrl_t *)context; + kcom_msg_dma_info_t kmsg; + int len; + + bkn_thread_boot(tc); + + memset(&kmsg, 0, sizeof(kmsg)); + kmsg.hdr.type = KCOM_MSG_TYPE_EVT; + kmsg.hdr.opcode = KCOM_M_DMA_INFO; + + DBG_VERB(("Event thread starting\n")); + tc->state = 1; + while (!bkn_thread_should_stop(tc)) { + tc->state = 2; + len = bkn_get_next_dma_event(&kmsg); + tc->state = 3; + if (len) { + PROXY_SEND(KCOM_CHAN_KNET, &kmsg, len); + } else { + /* Thread interrupted */ + bkn_sleep(1); + } + } + DBG_VERB(("Event thread done\n")); + + bkn_thread_exit(tc); + return 0; +} + +static int +_cleanup(void) +{ + struct list_head *list; + struct net_device *dev; + bkn_filter_t *filter; + bkn_priv_t *priv; + bkn_switch_info_t *sinfo; + unsigned long flags; + + /* Inidicate that we are shutting down */ + module_initialized = 0; + + /* Shut down event thread */ + bkn_thread_stop(&bkn_evt_ctrl); + + /* Shut down command thread */ + bkn_thread_stop(&bkn_cmd_ctrl); + + /* Remove KCOM channel */ + PROXY_SERVICE_DESTROY(KCOM_CHAN_KNET); + + bkn_proc_cleanup(); + remove_proc_entry("bcm/knet", NULL); + remove_proc_entry("bcm", NULL); + + list_for_each(list, &_sinfo_list) { + sinfo = (bkn_switch_info_t *)list; + + del_timer_sync(&sinfo->timer); + del_timer_sync(&sinfo->rxtick); + + spin_lock_irqsave(&sinfo->lock, flags); + bkn_dma_abort(sinfo); + dev_irq_mask_set(sinfo, 0); + spin_unlock_irqrestore(&sinfo->lock, flags); + + DBG_IRQ(("Unregister ISR.\n")); + kernel_bde->interrupt_disconnect(sinfo->dev_no | LKBDE_ISR2_DEV); + + if (use_napi) { + while (sinfo->napi_poll_mode) { + bkn_sleep(1); + } + } + + spin_lock_irqsave(&sinfo->lock, flags); + bkn_clean_dcbs(sinfo); + spin_unlock_irqrestore(&sinfo->lock, flags); + } + + /* Destroy all switch devices */ + while (!list_empty(&_sinfo_list)) { + sinfo = list_entry(_sinfo_list.next, bkn_switch_info_t, list); + + /* Destroy all associated Rx packet filters */ + while (!list_empty(&sinfo->rxpf_list)) { + filter = list_entry(sinfo->rxpf_list.next, bkn_filter_t, list); + list_del(&filter->list); + DBG_VERB(("Removing filter ID %d.\n", filter->kf.id)); + kfree(filter); + } + + /* Destroy all associated virtual net devices */ + while (!list_empty(&sinfo->ndev_list)) { + priv = list_entry(sinfo->ndev_list.next, bkn_priv_t, list); + list_del(&priv->list); + dev = priv->dev; + DBG_VERB(("Removing virtual Ethernet device %s.\n", dev->name)); + unregister_netdev(dev); + free_netdev(dev); + } + if (sinfo->ndevs != NULL) { + kfree(sinfo->ndevs); + } + + /* Destroy base net device */ + if (sinfo->dev) { + DBG_VERB(("Removing Ethernet device %s.\n", sinfo->dev->name)); + unregister_netdev(sinfo->dev); + free_netdev(sinfo->dev); + } + + DBG_VERB(("Removing switch device.\n")); + bkn_destroy_sinfo(sinfo); + } + + return 0; +} + +static int +bkn_knet_dev_reinit(int d) +{ + bkn_switch_info_t *sinfo; + uint32 dev_state; + uint32_t dev_type; + unsigned long flags; + + if (lkbde_dev_state_get(d, &dev_state) < 0) { + return -1; + } + DBG_VERB(("%s dev %d dev_state %d\n",__FUNCTION__, d, dev_state)); + if (dev_state == BDE_DEV_STATE_CHANGED) { + sinfo = bkn_sinfo_from_unit(d); + spin_lock_irqsave(&sinfo->lock, flags); + sinfo->base_addr = lkbde_get_dev_virt(d); + sinfo->dma_dev = lkbde_get_dma_dev(d); + sinfo->pdev = lkbde_get_hw_dev(d); + + dev_type = kernel_bde->get_dev_type(d); + /* Ensure 32-bit PCI DMA is mapped properly on 64-bit platforms */ + if (dev_type & BDE_PCI_DEV_TYPE) { + if (pci_set_dma_mask(sinfo->pdev, 0xffffffff)) { + gprintk("No suitable DMA available for SKBs\n"); + _cleanup(); + return -1; + } + } + dev_irq_mask_set(sinfo, 0); + spin_unlock_irqrestore(&sinfo->lock, flags); + + gprintk("Unregister ISR.\n"); + kernel_bde->interrupt_disconnect(sinfo->dev_no | LKBDE_ISR2_DEV); + + /* Register interrupt handler */ + kernel_bde->interrupt_connect(sinfo->dev_no | LKBDE_ISR2_DEV, + bkn_isr, sinfo); + + dev_state = 0; + lkbde_dev_state_set(d, dev_state); + } + return 0; +} + +static int +bkn_knet_dev_init(int d) +{ + uint32_t dev_type; + struct net_device *dev; + bkn_switch_info_t *sinfo; + bkn_priv_t *priv; + char *bdev_name; + const ibde_dev_t *bde_dev; + + DBG_VERB(("%s dev %d\n",__FUNCTION__, d)); + /* Base network device name */ + bdev_name = "bcm%d"; + if (base_dev_name) { + if (strlen(base_dev_name) < IFNAMSIZ) { + bdev_name = base_dev_name; + } else { + DBG_WARN(("Base device name too long\n")); + } + } + + dev_type = kernel_bde->get_dev_type(d); + DBG_VERB(("Found device type 0x%x\n", dev_type)); + if ((dev_type & BDE_SWITCH_DEV_TYPE) == 0) { + DBG_WARN(("Not switch device - skipping\n")); + return 0; + } + switch (dev_type & BDE_DEV_BUS_TYPE_MASK) { + case BDE_PCI_DEV_TYPE: + case BDE_ICS_DEV_TYPE: + case BDE_AXI_DEV_TYPE: + break; + default: + DBG_WARN(("Not PCI/ICS/AXI device - skipping\n")); + return 0; + } + + if ((sinfo = bkn_create_sinfo(d)) == NULL) { + _cleanup(); + return -ENOMEM; + } + /* Ensure 32-bit PCI DMA is mapped properly on 64-bit platforms */ + if (dev_type & BDE_PCI_DEV_TYPE) { + if (pci_set_dma_mask(sinfo->pdev, 0xffffffff)) { + gprintk("No suitable DMA available for SKBs\n"); + _cleanup(); + return -EIO; + } + } + /* Initialize the cpu_no.*/ + if (dev_type & BDE_AXI_DEV_TYPE) { + /* AXI device type implies the activated iProc iHost */ + sinfo->cpu_no = 1; + } + /* Initialize default RCPU signature */ + if ((bde_dev = kernel_bde->get_dev(d)) != NULL) { + sinfo->rcpu_sig = bde_dev->device & ~0xf; + } + /* Check for override */ + if (rcpu_signature) { + sinfo->rcpu_sig = rcpu_signature; + } + + /* Ensure all interrupts are disabled, e.g. if warmbooting */ + dev_irq_mask_set(sinfo, 0); + + /* Register interrupt handler */ + kernel_bde->interrupt_connect(sinfo->dev_no | LKBDE_ISR2_DEV, + bkn_isr, sinfo); + + /* Create base virtual net device */ + bkn_dev_mac[5]++; + if ((dev = bkn_init_ndev(bkn_dev_mac, bdev_name)) == NULL) { + _cleanup(); + return -ENOMEM; + } else { + sinfo->dev = dev; + priv = netdev_priv(dev); + priv->dev = dev; + priv->sinfo = sinfo; + priv->vlan = 1; + priv->port = -1; + memset(priv->itmh, 0, sizeof(priv->itmh)); + priv->id = -1; + } + + if (use_napi) { + netif_napi_add(dev, &sinfo->napi, bkn_poll, napi_weight); + } + return 0; +} + +static int +_init(void) +{ + int idx; + int num_dev; + int rv; + bkn_evt_resource_t *evt; + + /* Connect to the kernel bde */ + if ((linux_bde_create(NULL, &kernel_bde) < 0) || kernel_bde == NULL) { + return -ENODEV; + } + + /* Randomize Lower 3 bytes of the MAC address (TESTING ONLY) */ + get_random_bytes(&bkn_dev_mac[3], 3); + + /* Check for user-supplied MAC address (recommended) */ + if (mac_addr != NULL && strlen(mac_addr) == 17) { + for (idx = 0; idx < 6; idx++) { + bkn_dev_mac[idx] = simple_strtoul(&mac_addr[idx*3], NULL, 16); + } + /* Do not allow multicast address */ + bkn_dev_mac[0] &= ~0x01; + } + + /* Optional RCPU MAC addresses */ + if (rcpu_dmac != NULL && strlen(rcpu_dmac) == 17) { + for (idx = 0; idx < 6; idx++) { + bkn_rcpu_dmac[idx] = simple_strtoul(&rcpu_dmac[idx*3], NULL, 16); + } + } + if (rcpu_smac != NULL && strlen(rcpu_smac) == 17) { + for (idx = 0; idx < 6; idx++) { + bkn_rcpu_smac[idx] = simple_strtoul(&rcpu_smac[idx*3], NULL, 16); + } + } + + /* NAPI implies that base device must be up before we can pass traffic */ + if (use_napi) { + basedev_suspend = 1; + } + + num_dev = kernel_bde->num_devices(BDE_ALL_DEVICES); + for (idx = 0; idx < num_dev; idx++) { + rv = bkn_knet_dev_init(idx); + if (rv) { + return rv; + } + } + + /* Initialize proc files */ + proc_mkdir("bcm", NULL); + bkn_proc_root = proc_mkdir("bcm/knet", NULL); + + bkn_proc_init(); + + /* Initialize event queue */ + for (idx = 0; idx < LINUX_BDE_MAX_DEVICES; idx++) { + memset(&_bkn_evt[idx], 0, sizeof(bkn_evt_resource_t)); + } + evt = &_bkn_evt[0]; + init_waitqueue_head(&evt->evt_wq); + + if (use_proxy) { + PROXY_SERVICE_CREATE(KCOM_CHAN_KNET, 1, 0); + + DBG_VERB(("Starting command thread\n")); + bkn_thread_start(&bkn_cmd_ctrl, "bkncmd", bkn_cmd_thread); + + DBG_VERB(("Starting event thread\n")); + bkn_thread_start(&bkn_evt_ctrl, "bknevt", bkn_evt_thread); + } + + module_initialized = 1; + + return 0; +} + +static int +_ioctl(unsigned int cmd, unsigned long arg) +{ + bkn_ioctl_t io; + kcom_msg_t kmsg; + + if (!module_initialized) { + return -EFAULT; + } + + if (copy_from_user(&io, (void*)arg, sizeof(io))) { + return -EFAULT; + } + + if (io.len > sizeof(kmsg)) { + return -EINVAL; + } + + io.rc = 0; + + switch(cmd) { + case 0: + if (io.len > 0) { + if (copy_from_user(&kmsg, (void *)(unsigned long)io.buf, io.len)) { + return -EFAULT; + } + ioctl_cmd++; + io.len = bkn_handle_cmd_req(&kmsg, io.len); + ioctl_cmd--; + } else { + memset(&kmsg, 0, sizeof(kcom_msg_dma_info_t)); + /* + * Retrive the kmsg.hdr.unit from user space. The dma event queue + * selection is based the instance derived from unit. + */ + if (copy_from_user(&kmsg, (void *)(unsigned long)io.buf, sizeof(kmsg))) { + return -EFAULT; + } + kmsg.hdr.type = KCOM_MSG_TYPE_EVT; + kmsg.hdr.opcode = KCOM_M_DMA_INFO; + ioctl_evt++; + io.len = bkn_get_next_dma_event((kcom_msg_dma_info_t *)&kmsg); + ioctl_evt--; + } + if (io.len > 0) { + if (copy_to_user((void *)(unsigned long)io.buf, &kmsg, io.len)) { + return -EFAULT; + } + } + break; + default: + gprintk("Invalid IOCTL"); + io.rc = -1; + break; + } + + if (copy_to_user((void*)arg, &io, sizeof(io))) { + return -EFAULT; + } + + return 0; +} + +static gmodule_t _gmodule = { + name: MODULE_NAME, + major: MODULE_MAJOR, + init: _init, + cleanup: _cleanup, + pprint: _pprint, + ioctl: _ioctl, + open: NULL, + close: NULL, +}; + +gmodule_t* +gmodule_get(void) +{ + EXPORT_NO_SYMBOLS; + return &_gmodule; +} + +/* + * Call-back interfaces for other Linux kernel drivers. + * + * The Rx call-back allows an external module to modify SKB contents + * before it is handed off to the Linux network stack. + * + * The Tx call-back allows an external module to modify SKB contents + * before it is injected inot the switch. + */ + +int +bkn_rx_skb_cb_register(knet_skb_cb_f rx_cb) +{ + if (knet_rx_cb != NULL) { + return -1; + } + knet_rx_cb = rx_cb; + return 0; +} + +int +bkn_rx_skb_cb_unregister(knet_skb_cb_f rx_cb) +{ + if (rx_cb != NULL && knet_rx_cb != rx_cb) { + return -1; + } + knet_rx_cb = NULL; + return 0; +} + +int +bkn_tx_skb_cb_register(knet_skb_cb_f tx_cb) +{ + if (knet_tx_cb != NULL) { + return -1; + } + knet_tx_cb = tx_cb; + return 0; +} + +int +bkn_tx_skb_cb_unregister(knet_skb_cb_f tx_cb) +{ + if (tx_cb != NULL && knet_tx_cb != tx_cb) { + return -1; + } + knet_tx_cb = NULL; + return 0; +} + +int +bkn_filter_cb_register(knet_filter_cb_f filter_cb) +{ + if (knet_filter_cb != NULL) { + return -1; + } + knet_filter_cb = filter_cb; + return 0; +} + +int +bkn_filter_cb_unregister(knet_filter_cb_f filter_cb) +{ + if (filter_cb != NULL && knet_filter_cb != filter_cb) { + return -1; + } + knet_filter_cb = NULL; + return 0; +} + +LKM_EXPORT_SYM(bkn_rx_skb_cb_register); +LKM_EXPORT_SYM(bkn_rx_skb_cb_unregister); +LKM_EXPORT_SYM(bkn_tx_skb_cb_register); +LKM_EXPORT_SYM(bkn_tx_skb_cb_unregister); +LKM_EXPORT_SYM(bkn_filter_cb_register); +LKM_EXPORT_SYM(bkn_filter_cb_unregister); diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/bcm-knet.h b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/bcm-knet.h new file mode 100644 index 000000000000..277ea741525a --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/bcm-knet.h @@ -0,0 +1,79 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: bcm-knet.h,v 1.4 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ +#ifndef __LINUX_BCM_KNET_H__ +#define __LINUX_BCM_KNET_H__ + +#ifndef __KERNEL__ +#include +#endif + +typedef struct { + int rc; + int len; + int bufsz; + int reserved; + uint64_t buf; +} bkn_ioctl_t; + +#ifdef __KERNEL__ + +/* + * Call-back interfaces for other Linux kernel drivers. + */ +#include + +typedef struct { + uint32 netif_user_data; + uint32 filter_user_data; + uint16 dcb_type; +} knet_skb_cb_t; + +#define KNET_SKB_CB(__skb) ((knet_skb_cb_t *)&((__skb)->cb[0])) + +typedef struct sk_buff * +(*knet_skb_cb_f)(struct sk_buff *skb, int dev_no, void *meta); + +typedef int +(*knet_filter_cb_f)(uint8_t *pkt, int size, int dev_no, void *meta, + int chan, kcom_filter_t *filter); + +extern int +bkn_rx_skb_cb_register(knet_skb_cb_f rx_cb); + +extern int +bkn_rx_skb_cb_unregister(knet_skb_cb_f rx_cb); + +extern int +bkn_tx_skb_cb_register(knet_skb_cb_f tx_cb); + +extern int +bkn_tx_skb_cb_unregister(knet_skb_cb_f tx_cb); + +extern int +bkn_filter_cb_register(knet_filter_cb_f filter_cb); + +extern int +bkn_filter_cb_unregister(knet_filter_cb_f filter_cb); + +#endif + +#endif /* __LINUX_BCM_KNET_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/gmodule.h b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/gmodule.h new file mode 100644 index 000000000000..a0deac1bae08 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/gmodule.h @@ -0,0 +1,66 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: gmodule.h,v 1.9 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +#ifndef __COMMON_LINUX_KRN_GMODULE_H__ +#define __COMMON_LINUX_KRN_GMODULE_H__ + +#include + +typedef struct gmodule_s { + + const char* name; + int major; + int minor; + + int (*init)(void); + int (*cleanup)(void); + + int (*pprint)(void); + + int (*open)(void); + int (*ioctl)(unsigned int cmd, unsigned long arg); + int (*close)(void); + int (*mmap) (struct file *filp, struct vm_area_struct *vma); + +} gmodule_t; + + +/* The framework will ask for your module definition */ +extern gmodule_t* gmodule_get(void); + + +/* Proc Filesystem information */ +extern int pprintf(const char* fmt, ...) + __attribute__ ((format (printf, 1, 2))); +extern int gmodule_vpprintf(char** page, const char* fmt, va_list args) + __attribute__ ((format (printf, 2, 0))); +extern int gmodule_pprintf(char** page, const char* fmt, ...) + __attribute__ ((format (printf, 2, 3))); + +extern int gprintk(const char* fmt, ...) + __attribute__ ((format (printf, 1, 2))); + +extern int gdbg(const char* fmt, ...) + __attribute__ ((format (printf, 1, 2))); +#define GDBG gdbg + +#endif /* __COMMON_LINUX_KRN_GMODULE_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/lkm.h b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/lkm.h new file mode 100644 index 000000000000..eb0077f2573b --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/include/lkm.h @@ -0,0 +1,180 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: lkm.h,v 1.22 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +#ifndef __COMMON_LINUX_KRN_LKM_H__ +#define __COMMON_LINUX_KRN_LKM_H__ + +#ifndef __KERNEL__ +# define __KERNEL__ +#endif +#ifndef MODULE +# define MODULE +#endif + +#include +#include +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) +#include +#endif +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,1,0) +#include +#endif +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0) +#include +#endif +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39) +#include +#endif +#include + +/* Helper defines for multi-version kernel support */ +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) +#define LKM_2_4 +#else +#define LKM_2_6 +#endif + +#include /* printk() */ +#include /* everything... */ +#include /* error codes */ +#include /* size_t */ +#include +#include /* O_ACCMODE */ +#include +#include +#include +#include +#include + +#include +#include +#include + +#ifdef CONFIG_DEVFS_FS +#include +#endif + +#define PROC_INTERFACE_KERN_VER_3_10 (LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0)) + +/* Compatibility Macros */ + +#ifdef LKM_2_4 + +#include +#include +#define LKM_MOD_PARAM(n,ot,nt,d) MODULE_PARM(n,ot) +#define LKM_MOD_PARAM_ARRAY(n,ot,nt,c,d) MODULE_PARM(n,ot) +#define LKM_EXPORT_SYM(s) +#define _free_netdev kfree + +#else /* LKM_2_6 */ + +#define LKM_MOD_PARAM(n,ot,nt,d) module_param(n,nt,d) +#define LKM_MOD_PARAM_ARRAY(n,ot,nt,c,d) module_param_array(n,nt,c,d) +#define LKM_EXPORT_SYM(s) EXPORT_SYMBOL(s) +#define _free_netdev free_netdev + +#endif /* LKM_2_x */ + +#ifndef list_for_each_safe +#define list_for_each_safe(l,t,i) t = 0; list_for_each((l),(i)) +#endif + +#ifndef reparent_to_init +#define reparent_to_init() +#endif + +#ifndef MODULE_LICENSE +#define MODULE_LICENSE(str) +#endif + +#ifndef EXPORT_NO_SYMBOLS +#define EXPORT_NO_SYMBOLS +#endif + +#ifndef DEFINE_SPINLOCK +#define DEFINE_SPINLOCK(_lock) spinlock_t _lock = SPIN_LOCK_UNLOCKED +#endif + +#ifndef __SPIN_LOCK_UNLOCKED +#define __SPIN_LOCK_UNLOCKED(_lock) SPIN_LOCK_UNLOCKED +#endif + +#ifndef lock_kernel +#ifdef preempt_disable +#define lock_kernel() preempt_disable() +#else +#define lock_kernel() +#endif +#endif + +#ifndef unlock_kernel +#ifdef preempt_enable +#define unlock_kernel() preempt_enable() +#else +#define unlock_kernel() +#endif +#endif + +#ifndef init_MUTEX_LOCKED +#define init_MUTEX_LOCKED(_sem) sema_init(_sem, 0) +#endif + +#ifdef CONFIG_BCM98245 +#define CONFIG_BMW +#endif + +#if PROC_INTERFACE_KERN_VER_3_10 +#define PROC_CREATE(_entry, _name, _acc, _path, _fops) \ + do { \ + _entry = proc_create(_name, _acc, _path, _fops); \ + } while (0) + +#define PROC_CREATE_DATA(_entry, _name, _acc, _path, _fops, _data) \ + do { \ + _entry = proc_create_data(_name, _acc, _path, _fops, _data); \ + } while (0) + +#define PROC_PDE_DATA(_node) PDE_DATA(_node) + +#else +#define PROC_CREATE(_entry, _name, _acc, _path, _fops) \ + do { \ + _entry = create_proc_entry(_name, _acc, _path); \ + if (_entry) { \ + _entry->proc_fops = _fops; \ + } \ + } while (0) + +#define PROC_CREATE_DATA(_entry, _name, _acc, _path, _fops, _data) \ + do { \ + _entry = create_proc_entry(_name, _acc, _path); \ + if (_entry) { \ + _entry->proc_fops = _fops; \ + _entry->data=_data; \ + } \ + } while (0) + +#define PROC_PDE_DATA(_node) PROC_I(_node)->pde->data +#endif + +#endif /* __COMMON_LINUX_KRN_LKM_H__ */ diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/knet-cb/Makefile b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/knet-cb/Makefile new file mode 100644 index 000000000000..ecabf0ae8e26 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/knet-cb/Makefile @@ -0,0 +1,65 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: +# $Copyright: (c) 2017 Broadcom Corp. +# All Rights Reserved.$ +# +LOCALDIR = systems/linux/kernel/modules/knet-cb + +include ${SDK}/make/Make.config + +LIBS = $(LIBDIR)/libkern.a + +ifeq ($(kernel_version),2_4) +MODULE = $(LIBDIR)/linux-knet-cb.o +else +KERNEL_MODULE_DIR = kernel_module + +THIS_MOD_NAME := linux-knet-cb +MODULE = $(LIBDIR)/$(THIS_MOD_NAME).o +KMODULE = $(LIBDIR)/$(THIS_MOD_NAME).ko + +build: $(MODULE) $(KMODULE) +endif + +KBUILD_EXTRA_SYMBOLS := ${BLDDIR}/../bcm-knet/kernel_module/Module.symvers + +# BCM Network Device + +$(MODULE): $(BLDDIR)/.tree $(BOBJS) $(LIBS) + $(LD) $(MODULE_LDFLAGS) -r -d $(BOBJS) $(LIBS) -o $@ +ifneq ($(kernel_version),2_4) +$(KMODULE): $(MODULE) + rm -fr $(BLDDIR)/$(KERNEL_MODULE_DIR) + mkdir $(BLDDIR)/$(KERNEL_MODULE_DIR) + cp ${SDK}/make/Makefile.linux-kmodule $(BLDDIR)/$(KERNEL_MODULE_DIR)/Makefile + cat ${KBUILD_EXTRA_SYMBOLS} > $(BLDDIR)/$(KERNEL_MODULE_DIR)/Module.symvers + MOD_NAME=$(THIS_MOD_NAME) $(MAKE) -C $(BLDDIR)/$(KERNEL_MODULE_DIR) $(THIS_MOD_NAME).ko +endif + +# Make.depend is before clean:: so that Make.depend's clean:: runs first. + +include ${SDK}/make/Make.depend + +clean:: + $(RM) $(BLDDIR)/version.c $(BLDDIR)/version.o + $(RM) $(BOBJS) $(MODULE) + +ifneq ($(kernel_version),2_4) +.PHONY: build +endif diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/knet-cb/knet-cb.c b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/knet-cb/knet-cb.c new file mode 100644 index 000000000000..30fba8750ed3 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/knet-cb/knet-cb.c @@ -0,0 +1,276 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: + * $Copyright: (c) 2017 Broadcom Corp. + * All Rights Reserved.$ + */ + +/* + * Driver for call-back functions for Linux KNET driver. + * + * This is sample code that demonstrates how to selectively strip VLAN tags + * from an incoming packet based on tag information in the DMA control block + * (DCB). The switch will automatically add a VLAN tag to packets that ingress + * without an outer VLAN tag. Outer tagged and double tagged packets are + * not modified. The call back defined here determines which packets have + * had tags added by those and strips only those tags from the packet. + * + * This is sample code, the customer is responsible for maintaining and + * modifying this code as necessary. + * + * The module can be built from the standard Linux user mode target + * directories using the following command (assuming bash), e.g. + * + * cd $SDK/systems/linux/user/ + * make BUILD_KNET_CB=1 + * + */ + +#include /* Must be included first */ +#include +#include +#include + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("Broadcom Linux KNET Call-Back Driver"); +MODULE_LICENSE("GPL"); + +/* Module Information */ +#define MODULE_MAJOR 121 +#define MODULE_NAME "linux-knet-cb" + +/* set KNET_CB_DEBUG for debug info */ +#define KNET_CB_DEBUG + +/* Maintain tag strip statistics */ +struct strip_stats_s { + unsigned long stripped; /* Number of packets that have been stripped */ + unsigned long checked; + unsigned long skipped; +}; + +static struct strip_stats_s strip_stats; + +/* Local function prototypes */ +static void strip_vlan_tag(struct sk_buff *skb); +static int get_tag_status(int dcb_type, void *meta); +static struct sk_buff *strip_tag_rx_cb(struct sk_buff *skb, int dev_no, void *meta); +static struct sk_buff *strip_tag_tx_cb(struct sk_buff *skb, int dev_no, void *meta); +static int strip_tag_filter_cb(uint8_t * pkt, int size, int dev_no, void *meta, + int chan, kcom_filter_t * kf); +static int _pprint(void); +static int _cleanup(void); +static int _init(void); + +/* Remove VLAN tag for select TPIDs */ +static void +strip_vlan_tag(struct sk_buff *skb) +{ + uint16_t vlan_proto = (uint16_t) ((skb->data[12] << 8) | skb->data[13]); + if ((vlan_proto == 0x8100) || (vlan_proto == 0x88a8) || (vlan_proto == 0x9100)) { + /* Move first 12 bytes of packet back by 4 */ + ((u32 *) skb->data)[3] = ((u32 *) skb->data)[2]; + ((u32 *) skb->data)[2] = ((u32 *) skb->data)[1]; + ((u32 *) skb->data)[1] = ((u32 *) skb->data)[0]; + skb_pull(skb, 4); /* Remove 4 bytes from start of buffer */ + } +} + +/* + * Location of tagging status in select DCB types found below: + * + * DCB type 14: word 12, bits 10.11 + * DCB type 19, 20, 21, 22, 30: word 12, bits 10..11 + * DCB type 23, 29: word 13, bits 0..1 + * DCB type 31, 34, 37: word 13, bits 0..1 + * DCB type 26, 32, 33, 35: word 13, bits 0..1 + * + * The function get_tag_status() returns the tag status for known DCB types. + * 0 = Untagged + * 1 = Single inner-tag + * 2 = Single outer-tag + * 3 = Double tagged. + * -1 = Unsupported DCB type + */ +static int +get_tag_status(int dcb_type, void *meta) +{ + uint32 *dcb = (uint32 *) meta; + int tag_status; + switch (dcb_type) { + case 14: + case 19: + case 20: + case 21: + case 22: + case 30: + tag_status = (dcb[12] > 10) & 0x3; + break; + case 23: + case 29: + case 31: + case 34: + case 37: + case 26: + case 32: + case 33: + case 35: + tag_status = dcb[13] & 0x3; + break; + default: + tag_status = -1; + break; + } + return tag_status; +} + +/* + * SDK-134189 added the ability to pass two 4 byte unsigned values to the + * KNET callback function, one from the matching filter and one from the + * network interface. The usage of this data is completely defined by the + * user. In this case, if bit 0 of the interface value is set, tag stripping + * is enabled for that interface. When creating the interface and filter, + * something like the following is necessary: "netif.cb_user_data = uflags". + */ +#define NETIF_UNTAGGED_STRIP (1 << 0) + +/* Rx packet callback function */ +static struct sk_buff * +strip_tag_rx_cb(struct sk_buff *skb, int dev_no, void *meta) +{ + unsigned netif_flags = KNET_SKB_CB(skb)->netif_user_data; + unsigned dcb_type; + int tag_status; + /* Currently not using filter flags: + * unsigned filter_flags = KNET_SKB_CB(skb)->filter_user_data; + */ + +#ifdef KNET_CB_DEBUG + gprintk("%s Enter; Flags: %08X\n", __func__, netif_flags); +#endif + + if ((netif_flags & NETIF_UNTAGGED_STRIP) == 0) { + /* Untagged stripping not enabled on this netif */ + strip_stats.skipped++; + return skb; + } + + /* Get DCB type for this packet, passed by KNET driver */ + dcb_type = KNET_SKB_CB(skb)->dcb_type; + + /* Get tag status from DCB */ + tag_status = get_tag_status(dcb_type, meta); + +#ifdef KNET_CB_DEBUG + gprintk("%s; DCB Type: %d; tag status: %d\n", __func__, dcb_type, tag_status); +#endif + + if (tag_status < 0) { + /* Unsupported DCB type */ + return skb; + } + + strip_stats.checked++; + /* + * Untagged and inner tagged packet will get a new tag from the switch + * device, we need to strip this off. + */ + if (tag_status < 2) { +#ifdef KNET_CB_DEBUG + gprintk("%s; Stripping VLAN\n", __func__); +#endif + strip_stats.stripped++; + strip_vlan_tag(skb); + } +#ifdef KNET_CB_DEBUG + else { + gprintk("%s; Preserve VLAN\n", __func__); + } +#endif + return skb; +} + +/* Tx callback not used */ +static struct sk_buff * +strip_tag_tx_cb(struct sk_buff *skb, int dev_no, void *meta) +{ + /* Pass through for now */ + return skb; +} + +/* Filter callback not used */ +static int +strip_tag_filter_cb(uint8_t * pkt, int size, int dev_no, void *meta, + int chan, kcom_filter_t *kf) +{ + /* Pass through for now */ + return 0; +} + +/* + * Get statistics. + * % cat /proc/linux-knet-cb + */ +static int +_pprint(void) +{ + pprintf("Broadcom Linux KNET Call-Back: Untagged VLAN Stripper\n"); + pprintf(" %lu stripped packets\n", strip_stats.stripped); + pprintf(" %lu packets checked\n", strip_stats.checked); + pprintf(" %lu packets skipped\n", strip_stats.skipped); + + return 0; +} + +static int +_cleanup(void) +{ + bkn_rx_skb_cb_unregister(strip_tag_rx_cb); + bkn_tx_skb_cb_unregister(strip_tag_tx_cb); + bkn_filter_cb_unregister(strip_tag_filter_cb); + + return 0; +} + +static int +_init(void) +{ + bkn_rx_skb_cb_register(strip_tag_rx_cb); + bkn_tx_skb_cb_register(strip_tag_tx_cb); + bkn_filter_cb_register(strip_tag_filter_cb); + + return 0; +} + +static gmodule_t _gmodule = { + name: MODULE_NAME, + major: MODULE_MAJOR, + init: _init, + cleanup: _cleanup, + pprint: _pprint, + ioctl: NULL, + open: NULL, + close: NULL, +}; + +gmodule_t* +gmodule_get(void) +{ + EXPORT_NO_SYMBOLS; + return &_gmodule; +} diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/Makefile b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/Makefile new file mode 100644 index 000000000000..4c420c07ecdd --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/Makefile @@ -0,0 +1,30 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.2 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# +LOCALDIR = systems/linux/kernel/modules/shared + +include ${SDK}/make/Make.config + +lib = libkern + +include ${SDK}/make/Make.kernlib + +include ${SDK}/make/Make.depend diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/gmodule.c b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/gmodule.c new file mode 100644 index 000000000000..a72a54ef1c69 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/gmodule.c @@ -0,0 +1,428 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: gmodule.c,v 1.20 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + * + * Generic Linux Module Framework + * + * Hooks up your driver to the kernel + */ + +#include +#include +#include +#include + +/* Module Vector Table */ +static gmodule_t* _gmodule = NULL; + + +/* Allow DEVFS Support on 2.4 Kernels */ +#if defined(LKM_2_4) && defined(CONFIG_DEVFS_FS) +#define GMODULE_CONFIG_DEVFS_FS +#endif + + +#ifdef GMODULE_CONFIG_DEVFS_FS +devfs_handle_t devfs_handle = NULL; +#endif + +/* FIXME: support dynamic debugging */ + +static int _dbg_enable = 0; + +static int +gvprintk(const char* fmt, va_list args) + __attribute__ ((format (printf, 1, 0))); + +static int +gvprintk(const char* fmt, va_list args) +{ + static char _buf[256]; + + strcpy(_buf, ""); + sprintf(_buf, "%s (%d): ", _gmodule->name, current->pid); + vsprintf(_buf+strlen(_buf), fmt, args); + printk("%s",_buf); + + return 0; +} + +int +gprintk(const char* fmt, ...) +{ + int rv; + + va_list args; + va_start(args, fmt); + rv = gvprintk(fmt, args); + va_end(args); + return rv; +} + +int +gdbg(const char* fmt, ...) +{ + int rv = 0; + + va_list args; + va_start(args, fmt); + if(_dbg_enable) { + rv = gvprintk(fmt, args); + } + va_end(args); + return rv; +} + + +/* + * Proc FS Utilities + */ +#if PROC_INTERFACE_KERN_VER_3_10 +static struct seq_file* _proc_buf = NULL; + +int +pprintf(const char* fmt, ...) +{ + va_list args; + va_start(args, fmt); + seq_vprintf(_proc_buf, fmt, args); + va_end(args); + return 0; +} + +static int _gmodule_proc_show(struct seq_file *m, void *v){ + _proc_buf = m; + _gmodule->pprint(); + return 0; +} + +static int +_gmodule_proc_open(struct inode * inode, struct file * file) { + if(_gmodule->open) { + _gmodule->open(); + } + + return single_open(file, _gmodule_proc_show, NULL); +} + +static ssize_t +_gmodule_proc_write(struct file *file, const char *buffer, + size_t count, loff_t *loff) +{ + /* Workaround to toggle debugging */ + if(count > 2) { + if(buffer[0] == 'd') { + _dbg_enable = buffer[1] - '0'; + GDBG("Debugging Enabled"); + } + } + return count; +} + +static int _gmodule_proc_release(struct inode * inode, struct file * file) { + if(_gmodule->close) { + _gmodule->close(); + } + + return single_release(inode, file); +} + +struct file_operations _gmodule_proc_fops = { + owner: THIS_MODULE, + open: _gmodule_proc_open, + read: seq_read, + llseek: seq_lseek, + write: _gmodule_proc_write, + release: _gmodule_proc_release, +}; +#else +int +gmodule_vpprintf(char** page_ptr, const char* fmt, va_list args) +{ + *page_ptr += vsprintf(*page_ptr, fmt, args); + return 0; +} + +int +gmodule_pprintf(char** page_ptr, const char* fmt, ...) +{ + int rv; + + va_list args; + va_start(args, fmt); + rv = gmodule_vpprintf(page_ptr, fmt, args); + va_end(args); + return rv; +} + +static char* _proc_buf = NULL; + +int +pprintf(const char* fmt, ...) +{ + int rv; + + va_list args; + va_start(args, fmt); + rv = gmodule_vpprintf(&_proc_buf, fmt, args); + va_end(args); + return rv; +} + +#define PSTART(b) _proc_buf = b +#define PPRINT proc_print +#define PEND(b) (_proc_buf-b) + +static int +_gmodule_pprint(char* buf) +{ + PSTART(buf); + _gmodule->pprint(); + return PEND(buf); +} + +static int +_gmodule_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + *eof = 1; + return _gmodule_pprint(page); +} + +static int +_gmodule_write_proc(struct file *file, const char *buffer, + unsigned long count, void *data) +{ + /* Workaround to toggle debugging */ + if(count > 2) { + if(buffer[0] == 'd') { + _dbg_enable = buffer[1] - '0'; + GDBG("Debugging Enabled"); + } + } + return count; +} +#endif + +static int +_gmodule_create_proc(void) +{ + struct proc_dir_entry* ent; +#if PROC_INTERFACE_KERN_VER_3_10 + if((ent = proc_create(_gmodule->name, + S_IRUGO | S_IWUGO, + NULL, + &_gmodule_proc_fops)) != NULL) { + return 0; + } +#else + if((ent = create_proc_entry(_gmodule->name, S_IRUGO | S_IWUGO, NULL)) != NULL) { + ent->read_proc = _gmodule_read_proc; + ent->write_proc = _gmodule_write_proc; + return 0; + } +#endif + return -1; +} + +static void +_gmodule_remove_proc(void) +{ + remove_proc_entry(_gmodule->name, NULL); +} + +static int +_gmodule_open(struct inode *inode, struct file *filp) +{ + if(_gmodule->open) { + _gmodule->open(); + } + return 0; +} + +static int +_gmodule_release(struct inode *inode, struct file *filp) +{ + if(_gmodule->close) { + _gmodule->close(); + } + return 0; +} + +#ifdef HAVE_UNLOCKED_IOCTL +static long +_gmodule_unlocked_ioctl(struct file *filp, + unsigned int cmd, unsigned long arg) +{ + if(_gmodule->ioctl) { + return _gmodule->ioctl(cmd, arg); + } else { + return -1; + } +} +#else +static int +_gmodule_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + if(_gmodule->ioctl) { + return _gmodule->ioctl(cmd, arg); + } else { + return -1; + } +} +#endif + +#ifdef HAVE_COMPAT_IOCTL +static long +_gmodule_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + if(_gmodule->ioctl) { + return _gmodule->ioctl(cmd, arg); + } else { + return -1; + } +} +#endif + + +static int +_gmodule_mmap(struct file *filp, struct vm_area_struct *vma) +{ + if (_gmodule->mmap) { + return _gmodule->mmap(filp, vma); + } +#ifdef BCM_PLX9656_LOCAL_BUS + vma->vm_flags |= VM_RESERVED | VM_IO; + pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE | _PAGE_GUARDED; + + if (io_remap_pfn_range( vma, + vma->vm_start, + vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot)) { + return (-EAGAIN); + } + return (0); +#else/* BCM_PLX9656_LOCAL_BUS */ + return -EPERM; +#endif/* BCM_PLX9656_LOCAL_BUS */ +} + +/* FILE OPERATIONS */ + +struct file_operations _gmodule_fops = { +#ifdef HAVE_UNLOCKED_IOCTL + unlocked_ioctl: _gmodule_unlocked_ioctl, +#else + ioctl: _gmodule_ioctl, +#endif + open: _gmodule_open, + release: _gmodule_release, + mmap: _gmodule_mmap, +#ifdef HAVE_COMPAT_IOCTL + compat_ioctl: _gmodule_compat_ioctl, +#endif +}; + + +void __exit +cleanup_module(void) +{ + if(!_gmodule) return; + + /* Specific Cleanup */ + if(_gmodule->cleanup) { + _gmodule->cleanup(); + } + + /* Remove any proc entries */ + if(_gmodule->pprint) { + _gmodule_remove_proc(); + } + + /* Finally, remove ourselves from the universe */ +#ifdef GMODULE_CONFIG_DEVFS_FS + if(devfs_handle) devfs_unregister(devfs_handle); +#else + unregister_chrdev(_gmodule->major, _gmodule->name); +#endif +} + +int __init +init_module(void) +{ + int rc; + + /* Get our definition */ + _gmodule = gmodule_get(); + if(!_gmodule) return -ENODEV; + + + /* Register ourselves */ +#ifdef GMODULE_CONFIG_DEVFS_FS + devfs_handle = devfs_register(NULL, + _gmodule->name, + DEVFS_FL_NONE, + _gmodule->major, + _gmodule->minor, + S_IFCHR | S_IRUGO | S_IWUGO, + &_gmodule_fops, + NULL); + if(!devfs_handle) { + printk(KERN_WARNING "%s: can't register device with devfs", + _gmodule->name); + } + rc = 0; +#else + rc = register_chrdev(_gmodule->major, + _gmodule->name, + &_gmodule_fops); + if (rc < 0) { + printk(KERN_WARNING "%s: can't get major %d", + _gmodule->name, _gmodule->major); + return rc; + } + + if(_gmodule->major == 0) { + _gmodule->major = rc; + } +#endif + + /* Specific module Initialization */ + if(_gmodule->init) { + int rc; + if((rc = _gmodule->init()) < 0) { +#ifdef GMODULE_CONFIG_DEVFS_FS + if(devfs_handle) devfs_unregister(devfs_handle); +#else + unregister_chrdev(_gmodule->major, _gmodule->name); +#endif + return rc; + } + } + + /* Add a /proc entry, if valid */ + if(_gmodule->pprint) { + _gmodule_create_proc(); + } + + return 0; /* succeed */ +} diff --git a/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/ksal.c b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/ksal.c new file mode 100644 index 000000000000..1ed0416f02c9 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/kernel/modules/shared/ksal.c @@ -0,0 +1,250 @@ +/* + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to + * you under the terms of the GNU General Public License version 2 (the + * "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, + * with the following added to such license: + * + * As a special exception, the copyright holders of this software give + * you permission to link this software with independent modules, and to + * copy and distribute the resulting executable under terms of your + * choice, provided that you also meet, for each linked independent + * module, the terms and conditions of the license of that module. An + * independent module is a module which is not derived from this + * software. The special exception does not apply to any modifications + * of the software. + */ +/* + * $Id: ksal.c,v 1.1 Broadcom SDK $ + * $Copyright: (c) 2005 Broadcom Corp. + * All Rights Reserved.$ + */ + +#include +#include + +#include "lkm.h" +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26) +#include +#else +#include +#endif +#include +#include +#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,9,0) +#include +#endif +#include + +#ifdef MAX_USER_RT_PRIO +/* Assume 2.6 scheduler */ +#define SAL_YIELD(task) \ + yield() +#else +/* Assume 2.4 scheduler */ +#define SAL_YIELD(task) \ +do { \ + task->policy |= SCHED_YIELD; \ + schedule(); \ +} while (0) +#endif + +#define SECOND_USEC (1000000) +#define USECS_PER_JIFFY (SECOND_USEC / HZ) +#define USEC_TO_JIFFIES(usec) ((usec + (USECS_PER_JIFFY - 1)) / USECS_PER_JIFFY) + +#define sal_alloc(size, desc) kmalloc(size, GFP_KERNEL) +#define sal_free(ptr) kfree(ptr) + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,12) +#define WQ_SLEEP(a, b) wait_event_interruptible_timeout(a, NULL, b) +#else +#define WQ_SLEEP(a, b) interruptible_sleep_on_timeout(&(a), b) +#endif +/* + * sem_ctrl_t + * + * The semaphore control type uses the binary property to implement + * timed semaphores with improved performance using wait queues. + */ + +typedef struct sem_ctrl_s { + struct semaphore sem; + int binary; + int cnt; + wait_queue_head_t wq; +} sem_ctrl_t; + +sal_sem_t +sal_sem_create(char *desc, int binary, int initial_count) +{ + sem_ctrl_t *s; + + if ((s = sal_alloc(sizeof(*s), desc)) != 0) { + sema_init(&s->sem, initial_count); + s->binary = binary; + if (s->binary) { + init_waitqueue_head(&s->wq); + } + } + + return (sal_sem_t) s; +} + +void +sal_sem_destroy(sal_sem_t b) +{ + sem_ctrl_t *s = (sem_ctrl_t *) b; + + if (s == NULL) { + return; + } + + /* + * the linux kernel does not have a sema_destroy(s) + */ + sal_free(s); +} + +int +sal_sem_take(sal_sem_t b, int usec) +{ + sem_ctrl_t *s = (sem_ctrl_t *) b; + int err; + + if (usec == sal_sem_FOREVER && !in_interrupt()) { + err = down_interruptible(&s->sem); + } else { + int time_wait = 1; + int cnt = s->cnt; + + for (;;) { + if (down_trylock(&s->sem) == 0) { + err = 0; + break; + } + + if (s->binary) { + + /* Wait for event or timeout */ + + if (time_wait > 1) { + err = 1; + break; + } + err = wait_event_interruptible_timeout(s->wq, cnt != s->cnt, + USEC_TO_JIFFIES(usec)); + if (err < 0) { + break; + } + time_wait++; + + } else { + + /* Retry algorithm with exponential backoff */ + + if (time_wait > usec) { + time_wait = usec; + } + + sal_usleep(time_wait); + + usec -= time_wait; + + if (usec == 0) { + err = ETIMEDOUT; + break; + } + + if ((time_wait *= 2) > 100000) { + time_wait = 100000; + } + } + } + } + return err ? -1 : 0; +} + +int +sal_sem_give(sal_sem_t b) +{ + sem_ctrl_t *s = (sem_ctrl_t *) b; + + up(&s->sem); + if (s->binary) { + s->cnt++; + wake_up_interruptible(&s->wq); + } + return 0; +} + +uint32 +sal_time_usecs(void) +{ + struct timeval ltv; + do_gettimeofday(<v); + return (ltv.tv_sec * SECOND_USEC + ltv.tv_usec); +} + +void +sal_usleep(uint32 usec) +{ + uint32 start_usec; + wait_queue_head_t queue; + + if (usec <= SECOND_USEC / HZ) { + start_usec = sal_time_usecs(); + do { + SAL_YIELD(current); + } while ((sal_time_usecs() - start_usec) < usec); + } else { + init_waitqueue_head(&queue); + WQ_SLEEP(queue, USEC_TO_JIFFIES(usec)); + } +} + +void +sal_udelay(uint32 usec) +{ + static volatile int _sal_udelay_counter; + static int loops = 0; + int ix, iy; + + if (loops == 0 || usec == 0) { /* Need calibration? */ + int max_loops; + int start = 0, stop = 0; + int mpt = USECS_PER_JIFFY; /* usec/tick */ + + for (loops = 1; loops < 0x1000 && stop == start; loops <<= 1) { + /* Wait for clock turn over */ + for (stop = start = jiffies; start == stop; start = jiffies) { + /* Empty */ + } + sal_udelay(mpt); /* Single recursion */ + stop = jiffies; + } + + max_loops = loops / 2; /* Loop above overshoots */ + + start = stop = 0; + + if (loops < 4) { + loops = 4; + } + + for (loops /= 4; loops < max_loops && stop == start; loops++) { + /* Wait for clock turn over */ + for (stop = start = jiffies; start == stop; start = jiffies) { + /* Empty */ + } + sal_udelay(mpt); /* Single recursion */ + stop = jiffies; + } + } + + for (iy = 0; iy < usec; iy++) { + for (ix = 0; ix < loops; ix++) { + _sal_udelay_counter++; /* Prevent optimizations */ + } + } +} diff --git a/platform/broadcom/saibcm-modules/systems/linux/user/common/Makefile b/platform/broadcom/saibcm-modules/systems/linux/user/common/Makefile new file mode 100644 index 000000000000..f78ed606aa63 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/user/common/Makefile @@ -0,0 +1,242 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.4 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ +# + +SDK :=$(shell if [ -n "$$SDK" ] ; then\ + echo $$SDK;\ + else\ + cd $(dir $(lastword $(MAKEFILE_LIST))); while /usr/bin/test ! -e RELEASE ; do \ + dir=`cd ../;pwd`; \ + if [ "$$dir" = "/" ] ; then \ + echo Cannot find SDK in $(lastword $(MAKEFILE_LIST)) 1>&2; \ + exit 1; \ + fi ; \ + cd $$dir; \ + done ; \ + pwd; \ + fi) + +ifeq ($(SDK),) +$(error Please run this in a tree) +endif + +export SDK + +override-target=linux-$(platform) + +ifeq ($(LINUX_MAKE_SHARED_LIB),1) +libext = so.$(SHAREDLIBVER) +else +libext = a +endif + +ifeq (,$(platform)) +$(error Internal error: platform variable is not set) +endif + +include $(SDK)/make/Make.config +LOCALDIR=systems/linux/user/common +include $(SDK)/make/Make.depend +kernel-override=linux-$(platform) +ifdef BLDCONFIG +KERN_BLDROOT=${SDK}/${SDKBUILD}/${BLDCONFIG}/$(kernel-override)$(bldroot_suffix) +else +KERN_BLDROOT=${SDK}/${SDKBUILD}/$(kernel-override)$(bldroot_suffix) +endif + +ifeq (,$(kernel_version)) +kernel_version=2_4 +endif + +ifeq ($(kernel_version),2_6) +KOBJ=ko +else +KOBJ=o +endif + +ifneq (,$(TOOLS_DIR)) +override PATH := $(TOOLS_DIR):$(PATH) +endif + +ifeq ($(DEST_DIR),) +DEST_DIR=${BLDDIR} +endif + +KERNEL_BDE_LOCAL :=linux-kernel-bde.$(KOBJ) +KERNEL_BDE :=$(DEST_DIR)/$(KERNEL_BDE_LOCAL) + +USER_BDE_LOCAL :=linux-user-bde.$(KOBJ) +USER_BDE=$(DEST_DIR)/$(USER_BDE_LOCAL) + +BCM_KNET_LOCAL :=linux-bcm-knet.$(KOBJ) +BCM_KNET=$(DEST_DIR)/$(BCM_KNET_LOCAL) + +KNET_CB_LOCAL := linux-knet-cb.$(KOBJ) +KNET_CB := $(DEST_DIR)/$(KNET_CB_LOCAL) + +ifeq (,$(findstring DELIVER,$(MAKECMDGOALS))) +.DEFAULT_GOAL := all +all_targets := kernel_modules $(KERNEL_BDE) $(USER_BDE) + +LOCAL_TARGETS := + +ifeq ($(NO_LOCAL_TARGETS),) +LOCAL_TARGETS +=$(patsubst %,$(realpath ..)/$(platform)/%,$(KERNEL_BDE_LOCAL) $(USER_BDE_LOCAL)) + +all_targets +=$(LOCAL_TARGETS) +endif + +# Build all by default +ifndef BUILD_KNET +BUILD_KNET = 1 +endif + +ifeq ($(BUILD_KNET),1) +# Kernel network support +all_targets += $(BCM_KNET) + +ifeq ($(NO_LOCAL_TARGETS),) +LOCAL_TARGETS +=$(patsubst %,../$(platform)/%,$(BCM_KNET_LOCAL)) +all_targets +=$(LOCAL_TARGETS) +endif + +ADD_TO_CFLAGS += -I$(SDK)/systems/linux/kernel/modules/include +COND_KNET_LIBS = libuser.$(libext) + +ifeq ($(BUILD_KNET_CB),1) +# KNET callback module support +all_targets += $(KNET_CB) + +ifeq ($(NO_LOCAL_TARGETS),) +LOCAL_TARGETS +=$(patsubst %,../$(platform)/%,$(KNET_CB_LOCAL)) +all_targets +=$(LOCAL_TARGETS) +endif +endif + +endif + +#OPENNSL_FIXUP +.NOTPARALLEL: + +all: $(BLDDIR)/.tree $(all_targets) + +ifeq ($(NO_LOCAL_TARGETS),) +define LOCAL_TARGET_DEF +$(1) : $(DEST_DIR)/$(notdir $(1)) + cp $$? $$@ +endef +endif + +# User BDE libraries +ADD_TO_CFLAGS += -I$(SDK)/systems/bde/linux/include + +# Use raw IOCTL for KNET +ADD_TO_CFLAGS += -DPROXY_SUPPORT=0 + +CFLAGS += $(ADD_TO_CFLAGS) + +# Kernel network support +ifdef BUILD_KNET + +knet_subdirs = shared bcm-knet + +ifdef BUILD_KNET_CB +knet_subdirs += knet-cb +endif + +endif # BUILD_KNET + +kernel_modules: + $(MAKE) -C $(SDK)/systems/bde/linux/kernel kernel_version=$(kernel_version) + $(MAKE) -C $(SDK)/systems/bde/linux/user/kernel kernel_version=$(kernel_version) +ifeq ($(BUILD_KNET),1) + $(MAKE) -j1 -C $(SDK)/systems/linux/kernel/modules kernel_version=$(kernel_version) \ + subdirs="$(knet_subdirs)" override-target=linux-$(platform) CFLAGS="$(CFLAGS)" +endif + +$(KERNEL_BDE): $(KERN_BLDROOT)/linux-kernel-bde.$(KOBJ) + mkdir -p $(@D) + $(OBJCOPY) --strip-debug $< $@ + +$(USER_BDE): $(KERN_BLDROOT)/linux-user-bde.$(KOBJ) + $(OBJCOPY) --strip-debug $< $@ + +$(BCM_KNET): $(KERN_BLDROOT)/linux-bcm-knet.$(KOBJ) + $(OBJCOPY) --strip-debug $< $@ + +$(KNET_CB): $(KERN_BLDROOT)/linux-knet-cb.$(KOBJ) + $(OBJCOPY) --strip-debug $< $@ + +ifeq ($(NO_LOCAL_TARGETS),) +$(foreach targ,$(LOCAL_TARGETS),$(eval $(call LOCAL_TARGET_DEF,$(targ)))) +endif + +clean:: + $(MAKE) -C $(SDK)/systems/bde/linux/kernel $@ + $(MAKE) -C $(SDK)/systems/bde/linux/user/kernel $@ + $(MAKE) -C $(SDK)/systems/linux/kernel/modules \ + subdirs="$(knet_subdirs)" \ + override-target=linux-$(platform) $@ + $(RM) $(KERNEL_BDE) $(USER_BDE) + $(RM) $(BCM_KNET) + $(RM) $(KNET_CB) + $(RM) $(KERN_BLDROOT)/linux-kernel-bde.$(KOBJ) + $(RM) $(KERN_BLDROOT)/linux-user-bde.$(KOBJ) + $(RM) $(KERN_BLDROOT)/linux-bcm-knet.$(KOBJ) + $(RM) $(LOCAL_TARGETS) + +distclean:: clean + +.PHONY: variable + +# +# Echo variable values used for configuration +# usage: make VAR=CC variable +# +variable:: + @echo $($(VAR)) + +else +ifndef DELIVERY +$(error DELIVERY required) +endif + +DELIVERABLES := $(KERNEL_BDE) $(USER_BDE) +# 1= source +define DELIVERY_RULE +_DEL_TARG += $(DELIVERY)/$(notdir $(1)) +$(DELIVERY)/$(notdir $(1)) : $(1) + @mkdir -p $(DELIVERY) +ifeq ($(filter $(notdir $(BCM)) $(notdir $(BCM).dbg),$(notdir $1)),) + $(OBJCOPY) --strip-debug $$< $$@ +else + $(CP) -p $$< $$@ +endif +endef + +$(foreach f,$(DELIVERABLES),$(eval $(call DELIVERY_RULE,$(f)))) + +DELIVER: $(_DEL_TARG) +endif + +# Make.config defines remaining phony targets +.PHONY: build kernel_modules DELIVER + diff --git a/platform/broadcom/saibcm-modules/systems/linux/user/gto-2_6/Makefile b/platform/broadcom/saibcm-modules/systems/linux/user/gto-2_6/Makefile new file mode 100644 index 000000000000..08f37e51c637 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/user/gto-2_6/Makefile @@ -0,0 +1,85 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.9 Broadcom SDK $ +# $Copyright: (c) 2007 Broadcom Corp. +# All Rights Reserved.$ + +# +# This make job requires the following environment variables to be set: +# +# SDK - path to StrataXGS SDK root directory +# +# Optionally the following environment variables can be set to +# override the default build server configuration: +# +# PPC_TOOLS_DIR - path to build tools (if not in PATH already) +# PPC_CROSS_COMPILE - cross compile tools prefix +# LINUX_INCLUDE - path to Linux kernel include directory +# + +SDK :=$(shell if [ -n "$$SDK" ] ; then\ + echo $$SDK;\ + else\ + cd $(dir $(lastword $(MAKEFILE_LIST))); while /usr/bin/test ! -e RELEASE ; do \ + dir=`cd ../;pwd`; \ + if [ "$$dir" = "/" ] ; then \ + echo Cannot find SDK in $(lastword $(MAKEFILE_LIST)) 1>&2; \ + exit 1; \ + fi ; \ + cd $$dir; \ + done ; \ + pwd; \ + fi) + +ifeq ($(SDK),) +$(error Please run this in a tree) +endif + +export SDK + +override kernel_version=2_6 +platform=gto-$(kernel_version) +LINUX_MAKE_USER=1 +export LINKER_RELAX=1 + +# Select the build environment +#BUILD_PLATFORM=ELDK +#BUILD_PLATFORM=WR_LINUX + +#Select the LINUX KERNEL VERSION +#KERN_VER = 2.6.21.7 +#KERN_VER = 2.6.24.4 +#KERN_VER = 2.6.25 + + +# Select the ELDK version +#ELDK_VERSION=4.1 +#ELDK_VERSION=4.0 + +#Select WRS Linux version +#WRS_LINUX_VERSION=2.0 +#WRS_LINUX_VERSION=3.0 + + +export KERN_VER +export ELDK_VERSION +export BUILD_PLATFORM +export WRS_LINUX_VERSION + +include ${SDK}/make/Make.linux + diff --git a/platform/broadcom/saibcm-modules/systems/linux/user/gto/Makefile b/platform/broadcom/saibcm-modules/systems/linux/user/gto/Makefile new file mode 100644 index 000000000000..8e3422cd18d8 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/user/gto/Makefile @@ -0,0 +1,61 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.9 Broadcom SDK $ +# $Copyright: (c) 2015 Broadcom Corp. +# All Rights Reserved.$ + +# +# This make job requires the following environment variables to be set: +# +# SDK - path to StrataXGS SDK root directory +# +# Optionally the following environment variables can be set to +# override the default build server configuration: +# +# PPC_TOOLS_DIR - path to build tools (if not in PATH already) +# PPC_CROSS_COMPILE - cross compile tools prefix +# LINUX_INCLUDE - path to Linux kernel include directory +# + +SDK :=$(shell if [ -n "$$SDK" ] ; then\ + echo $$SDK;\ + else\ + cd $(dir $(lastword $(MAKEFILE_LIST))); while /usr/bin/test ! -e RELEASE ; do \ + dir=`cd ../;pwd`; \ + if [ "$$dir" = "/" ] ; then \ + echo Cannot find SDK in $(lastword $(MAKEFILE_LIST)) 1>&2; \ + exit 1; \ + fi ; \ + cd $$dir; \ + done ; \ + pwd; \ + fi) + +ifeq ($(SDK),) +$(error Please run this in a tree) +endif + +export SDK + +override kernel_version=4_4 +platform=gto +LINUX_MAKE_USER=1 +export LINKER_RELAX=1 + +include ${SDK}/make/Make.linux + diff --git a/platform/broadcom/saibcm-modules/systems/linux/user/iproc-3_14/Makefile b/platform/broadcom/saibcm-modules/systems/linux/user/iproc-3_14/Makefile new file mode 100644 index 000000000000..c2081e42dc33 --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/user/iproc-3_14/Makefile @@ -0,0 +1,66 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.7 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +# +# This make job requires the following environment variables to be set: +# +# SDK - path to StrataXGS SDK root directory +# +# Optionally the following environment variables can be set to +# override the default build server configuration: +# +# MIPS_TOOLS_DIR - path to build tools (if not in PATH already) +# MIPS_CROSS_COMPILE - cross compile tools prefix +# LINUX_INCLUDE - path to Linux kernel include directory +# + +SDK :=$(shell if [ -n "$$SDK" ] ; then\ + echo $$SDK;\ + else\ + cd $(dir $(lastword $(MAKEFILE_LIST))); while /usr/bin/test ! -e RELEASE ; do \ + dir=`cd ../;pwd`; \ + if [ "$$dir" = "/" ] ; then \ + echo Cannot find SDK in $(lastword $(MAKEFILE_LIST)) 1>&2; \ + exit 1; \ + fi ; \ + cd $$dir; \ + done ; \ + pwd; \ + fi) + +ifeq ($(SDK),) +$(error Please run this in a tree) +endif + +export SDK + +override kernel_version=3_14 +platform=iproc-$(kernel_version) + +IPROC_BUILD=1 +export IPROC_BUILD +export BUILD_PLATFORM +export ARM_LINUX_VERSION + +LINUX_MAKE_USER=1 +export ADD_TO_CFLAGS + +include ${SDK}/make/Make.linux diff --git a/platform/broadcom/saibcm-modules/systems/linux/user/iproc/Makefile b/platform/broadcom/saibcm-modules/systems/linux/user/iproc/Makefile new file mode 100644 index 000000000000..7eef55d448fd --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/user/iproc/Makefile @@ -0,0 +1,60 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.7 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +# +# This make job requires the following environment variables to be set: +# +# SDK - path to StrataXGS SDK root directory +# + +SDK :=$(shell if [ -n "$$SDK" ] ; then\ + echo $$SDK;\ + else\ + cd $(dir $(lastword $(MAKEFILE_LIST))); while /usr/bin/test ! -e RELEASE ; do \ + dir=`cd ../;pwd`; \ + if [ "$$dir" = "/" ] ; then \ + echo Cannot find SDK in $(lastword $(MAKEFILE_LIST)) 1>&2; \ + exit 1; \ + fi ; \ + cd $$dir; \ + done ; \ + pwd; \ + fi) + +ifeq ($(SDK),) +$(error Please run this in a tree) +endif + +export SDK + +override kernel_version=4_4 +platform=iproc + +IPROC_BUILD=1 +export IPROC_BUILD +export BUILD_PLATFORM +export ARM_LINUX_VERSION + +LINUX_MAKE_USER=1 +export ADD_TO_CFLAGS +export BR_NO_CCACHE + +include ${SDK}/make/Make.linux diff --git a/platform/broadcom/saibcm-modules/systems/linux/user/x86-smp_generic_64-2_6/Makefile b/platform/broadcom/saibcm-modules/systems/linux/user/x86-smp_generic_64-2_6/Makefile new file mode 100644 index 000000000000..bb5408536a3d --- /dev/null +++ b/platform/broadcom/saibcm-modules/systems/linux/user/x86-smp_generic_64-2_6/Makefile @@ -0,0 +1,46 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# -*- Makefile -*- +# $Id: Makefile,v 1.2 Broadcom SDK $ +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved.$ + +SDK :=$(shell if [ -n "$$SDK" ] ; then\ + echo $$SDK;\ + else\ + cd $(dir $(lastword $(MAKEFILE_LIST))); while /usr/bin/test ! -e RELEASE ; do \ + dir=`cd ../;pwd`; \ + if [ "$$dir" = "/" ] ; then \ + echo Cannot find SDK in $(lastword $(MAKEFILE_LIST)) 1>&2; \ + exit 1; \ + fi ; \ + cd $$dir; \ + done ; \ + pwd; \ + fi) + +ifeq ($(SDK),) +$(error Please run this in a tree) +endif + +export SDK + +override kernel_version=2_6 +platform=x86-smp_generic_64-$(kernel_version) + +LINUX_MAKE_USER=1 +include ${SDK}/make/Make.linux diff --git a/platform/broadcom/saibcm-modules/tools/mktool.pl b/platform/broadcom/saibcm-modules/tools/mktool.pl new file mode 100644 index 000000000000..96bff14ecdc8 --- /dev/null +++ b/platform/broadcom/saibcm-modules/tools/mktool.pl @@ -0,0 +1,293 @@ +# +# Unless you and Broadcom execute a separate written software license +# agreement governing use of this software, this software is licensed to +# you under the terms of the GNU General Public License version 2 (the +# "GPL"), available at http://www.broadcom.com/licenses/GPLv2.php, +# with the following added to such license: +# +# As a special exception, the copyright holders of this software give +# you permission to link this software with independent modules, and to +# copy and distribute the resulting executable under terms of your +# choice, provided that you also meet, for each linked independent +# module, the terms and conditions of the license of that module. An +# independent module is a module which is not derived from this +# software. The special exception does not apply to any modifications +# of the software. +# +# +# mktool.pl +# +# $Id: mktool.pl,v 1.5 Broadcom SDK $ +# +# $Copyright: (c) 2005 Broadcom Corp. +# All Rights Reserved. $ + +use File::Path; +use File::Find; +use File::Copy; +use Cwd; + +($prog = $0) =~ s/.*\///; + +SWITCH: +{ + $op = shift; + + if ($op eq "-rm") { mktool_rm(@ARGV); last SWITCH; } + if ($op eq "-cp") { mktool_cp(@ARGV); last SWITCH; } + if ($op eq "-md") { mktool_md(@ARGV); last SWITCH; } + if ($op eq "-ln") { mktool_ln(@ARGV); last SWITCH; } + if ($op eq "-foreach") { mktool_foreach(@ARGV); last SWITCH; } + if ($op eq "-dep") { mktool_makedep(@ARGV); last SWITCH; } + if ($op eq "-echo") { mktool_echo(@ARGV); last SWITCH; } + if ($op eq "-beep") { mktool_beep(@ARGV); last SWITCH; } + die("$prog: unknown option '$op'\n"); +} + +exit 0; + + + + +# +# mktool_execute +# +# Executes a command, returns exist status. +# Performs token special translation before execution. +# + +sub mktool_execute +{ + my $token = shift; + my @cmds = @_; + +# printf("mktool_execute: token = '$token'\n"); + foreach $cmd (@cmds) + { + #printf("mktool_execute: cmd = '$cmd'\n"); + $cmd =~ s/\#\#/$token/g; + if($cmd =~ /^-p/) + { + $cmd =~ s/^-p//; + printf("$cmd\n"); + } + else + { + system($cmd); + my $excode = ($? >> 8); + exit $excode if $excode; + } + } +} + + +$find_regexp = ""; +@find_cmd; + +# +# mktool_foreach +# +sub mktool_foreach +{ + if($_[0] eq "-find") + { + shift; + $find_dir = shift; + $find_regexp = shift; + @find_cmds = @_; + + if(!($find_dir =~ /^\//)) + { + $find_dir = cwd() . "/" . $find_dir; + } + find(\&_mktool_foreach_find_wanted, $find_dir); + } + else + { + my $subdir = 0; + if($_[0] eq "-subdir") + { + $subdir = 1; + shift; + } + + my @thingies = split(' ', shift); + + foreach $thingy (@thingies) + { + chdir $thingy unless $subdir == 0; + mktool_execute($thingy, @_); + chdir ".." unless $subdir == 0; + } + } +} + + + +sub _mktool_foreach_find_wanted +{ + my $expr = "\$File::Find::name =~ /\^$find_regexp\$/"; + + if(eval($expr)) + { + mktool_execute($File::Find::name, @find_cmds); + exit $excode if $excode; + } +} + + +# +# rm +# +# Removes a list of objects +# +sub mktool_rm +{ + my($f); + + foreach $f (@_) { + eval { rmtree($f) }; + if ($@) { + die "$prog $op: failed to remove $f: $@\n"; + } + } +} + +# +# md +# +# Makes a list of directories +# +sub mktool_md +{ + my($dir); + + foreach $dir (@_) { + $dir =~ s!/+$!!; + eval { mkpath($dir) }; + if ($@) { + die "$prog $op: failed to make directory $dir: $@\n"; + } + } +} + + +sub mktool_cp +{ + my($from, $to) = @_; + + if (@_ != 2) { + die "$prog $op: must have two arguments\n"; + } + copy($from, $to) || + die "$prog $op: failed to copy $from to $to: $!\n"; +} + +sub mktool_ln +{ + my($old, $new) = @_; + + if (@_ != 2) { + die "$prog $op: must have two arguments\n"; + } + link ($old, $new) || + die "$prog $op: failed to link $new to $old: $!\n"; +} + + +# @echo "$@ \\" > ${BLDDIR}/$(notdir $@) +# @if ($(DEPEND)) >> $(BLDDIR)/$(notdir $@); then \ +# exit 0; \ +# else \ +# rm -f ${BLDDIR}/$(notdir $@); \ +# exit 1; \ +# fi + +# $(MAKEDEP) "$@" "$(BLDDIR)/$(notdir $@)" "$(DEPEND)" + +sub mktool_makedep +{ + my ($source, $target, $cmd, $curdir) = @_; + my @result = `$cmd`; + my $sdk = $ENV{'SDK'}; + my $count; + my $tmp; + local $resultant; + +## Comman $cmd +#Command $cmd +print <-1) & ($count < 20) ) + { + $line=~s/\/\w+\/\.\.//; + # if we hit a major recursion, revert the line, report + # this to the output and drop out of the loop, but do + # continue, this should not halt generation + if($count++>19) + { + print "mktool.pl: could not process $line \n\n"; + print ":: curdir $curdir\n"; + print ":: target $target\n"; + print ":: cmd $cmd\n"; + $line=$tmp; + } + } + + # set all the paths to use the $SDK variable + $line =~ s/$ENV{'SDK'}/\$\{SDK\}/g; + $resultant=$resultant . $line; + } + + # some compilers return extra newlines + $resultant=~s/\n//g; + + # now clean up the result + $resultant=~s/\\/\\\n/g; + + mktool_md($dirName) unless (-d $dirName); + open (TARGET, ">$target") || + die("$prog $op: cannot open '$target' for writing: $!\n"); + print TARGET "$resultant\n"; + close(TARGET); + } +} + +sub mktool_echo +{ + print "@_\n"; +} + +sub mktool_beep +{ + -t STDOUT && defined $ENV{MAKEBEEP} && print "\007"; +} diff --git a/platform/broadcom/sdk.mk b/platform/broadcom/sdk.mk deleted file mode 100644 index a74db331aba7..000000000000 --- a/platform/broadcom/sdk.mk +++ /dev/null @@ -1,4 +0,0 @@ -BRCM_OPENNSL_KERNEL = opennsl-modules-4.9.0-5-amd64_3.4.1.11-1_amd64.deb -$(BRCM_OPENNSL_KERNEL)_URL = "https://sonicstorage.blob.core.windows.net/packages/opennsl-modules-4.9.0-5-amd64_3.4.1.11-1_amd64.deb?sv=2015-04-05&sr=b&sig=vdIqSXaJhvN7Blk08WyxWhfMxky0XBx37JYAmNozx3k%3D&se=2155-01-24T09%3A08%3A25Z&sp=r" - -SONIC_ONLINE_DEBS += $(BRCM_OPENNSL_KERNEL) From 5d46e050d6dc0945741779139f12602b9eabd478 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Wed, 8 Aug 2018 07:43:00 +0000 Subject: [PATCH 118/180] [devices]: move platform modules of accton, ingrasys, mitac, quanta into buildimage repo Signed-off-by: Guohan Lu --- .gitmodules | 12 - .../broadcom/sonic-platform-modules-accton | 1 - .../sonic-platform-modules-accton/.gitignore | 33 + .../sonic-platform-modules-accton/LICENSE | 16 + .../sonic-platform-modules-accton/README.md | 1 + .../as5712-54x/classes/__init__.py | 0 .../as5712-54x/classes/fanutil.py | 238 ++ .../as5712-54x/classes/thermalutil.py | 121 + .../as5712-54x/modules/Makefile | 17 + .../modules/accton_as5712_54x_fan.c | 437 ++++ .../modules/accton_as5712_54x_psu.c | 371 ++++ .../modules/accton_as5712_54x_sfp.c | 825 +++++++ .../as5712-54x/modules/cpr_4011_4mxx.c | 400 ++++ .../modules/i2c-mux-accton_as5712_54x_cpld.c | 1517 +++++++++++++ .../modules/leds-accton_as5712_54x.c | 594 +++++ .../as5712-54x/modules/ym2651y.c | 683 ++++++ .../service/as5712-platform-monitor.service | 17 + .../as5712-54x/setup.py | 16 + .../as5712-54x/utils/README | 117 + .../as5712-54x/utils/accton_as5712_monitor.py | 195 ++ .../as5712-54x/utils/accton_as5712_util.py | 602 +++++ .../as5812-54t/modules/Makefile | 4 + .../as5812-54t/modules/accton_i2c_cpld.c | 330 +++ .../modules/x86-64-accton-as5812-54t-fan.c | 442 ++++ .../modules/x86-64-accton-as5812-54t-leds.c | 601 +++++ .../modules/x86-64-accton-as5812-54t-psu.c | 372 ++++ .../modules/x86-64-accton-as5812-54t-sfp.c | 318 +++ .../as5812-54t/modules/ym2651y.c | 680 ++++++ .../service/as5812-platform-init.service | 13 + .../as5812-54t/utils/README | 60 + .../utils/accton_as5812_54t_util.py | 565 +++++ .../as7312-54x/classes/__init__.py | 0 .../as7312-54x/classes/fanutil.py | 255 +++ .../as7312-54x/classes/thermalutil.py | 124 ++ .../as7312-54x/modules/Makefile | 17 + .../modules/accton_as7312_54x_fan.c | 815 +++++++ .../modules/accton_as7312_54x_leds.c | 438 ++++ .../modules/accton_as7312_54x_psu.c | 277 +++ .../modules/accton_as7312_54x_sfp.c | 1972 ++++++++++++++++ .../as7312-54x/modules/accton_i2c_cpld.c | 1219 ++++++++++ .../as7312-54x/modules/ym2651y.c | 1 + .../service/as7312-platform-monitor.service | 17 + .../as7312-54x/setup.py | 16 + .../as7312-54x/utils/README | 117 + .../as7312-54x/utils/accton_as7312_monitor.py | 208 ++ .../as7312-54x/utils/accton_as7312_util.py | 588 +++++ .../as7326-56x/classes/__init__.py | 0 .../as7326-56x/classes/fanutil.py | 254 +++ .../as7326-56x/classes/thermalutil.py | 124 ++ .../as7326-56x/modules/Makefile | 17 + .../modules/accton_as7326_56x_fan.c | 815 +++++++ .../modules/accton_as7326_56x_leds.c | 438 ++++ .../modules/accton_as7326_56x_psu.c | 277 +++ .../as7326-56x/modules/accton_i2c_cpld.c | 1080 +++++++++ .../as7326-56x/modules/ym2651y.c | 1 + .../service/as7326-platform-monitor.service | 17 + .../as7326-56x/setup.py | 16 + .../as7326-56x/utils/README | 74 + .../as7326-56x/utils/accton_as7326_monitor.py | 208 ++ .../as7326-56x/utils/accton_as7326_util.py | 577 +++++ .../as7712-32x/classes/__init__.py | 0 .../as7712-32x/modules/Makefile | 2 + .../modules/accton_as7712_32x_fan.c | 776 +++++++ .../modules/accton_as7712_32x_psu.c | 288 +++ .../modules/accton_as7712_32x_sfp.c | 1171 ++++++++++ .../as7712-32x/modules/accton_i2c_cpld.c | 1 + .../as7712-32x/modules/accton_pmbus_3y.c | 1 + .../modules/leds-accton_as7712_32x.c | 690 ++++++ .../as7712-32x/modules/pmbus.h | 1 + .../as7712-32x/modules/ym2651y.c | 1 + .../service/as7712-platform-init.service | 13 + .../as7712-32x/setup.py | 16 + .../as7712-32x/utils/README | 60 + .../as7712-32x/utils/accton_as7712_util.py | 569 +++++ .../as7716-32x/classes/__init__.py | 0 .../as7716-32x/classes/fanutil.py | 254 +++ .../as7716-32x/classes/thermalutil.py | 123 + .../as7716-32x/modules/Makefile | 21 + .../modules/accton_as7716_32x_cpld1.c | 781 +++++++ .../modules/accton_as7716_32x_fan.c | 794 +++++++ .../modules/accton_as7716_32x_leds.c | 442 ++++ .../modules/accton_as7716_32x_psu.c | 381 ++++ .../modules/accton_as7716_32x_sfp.c | 365 +++ .../as7716-32x/modules/accton_i2c_cpld.c | 259 +++ .../as7716-32x/modules/cpr_4011_4mxx.c | 400 ++++ .../as7716-32x/modules/optoe.c | 1148 ++++++++++ .../as7716-32x/modules/ym2651y.c | 603 +++++ .../service/as7716-platform-monitor.service | 17 + .../as7716-32x/setup.py | 16 + .../as7716-32x/utils/README | 117 + .../as7716-32x/utils/accton_as7716_monitor.py | 207 ++ .../as7716-32x/utils/accton_as7716_util.py | 595 +++++ .../as7716-32xb/classes/__init__.py | 0 .../as7716-32xb/classes/fanutil.py | 263 +++ .../as7716-32xb/classes/thermalutil.py | 124 ++ .../as7716-32xb/modules/Makefile | 17 + .../modules/accton_as7716_32xb_cpld1.c | 1021 +++++++++ .../modules/accton_as7716_32xb_fan.c | 969 ++++++++ .../modules/accton_as7716_32xb_leds.c | 443 ++++ .../modules/accton_as7716_32xb_oom.c | 267 +++ .../modules/accton_as7716_32xb_pmbus.c | 444 ++++ .../modules/accton_as7716_32xb_psu.c | 355 +++ .../modules/accton_as7716_32xb_sfp.c | 365 +++ .../modules/accton_as7716_32xb_sys.c | 243 ++ .../modules/accton_as7716_32xb_thermal.c | 214 ++ .../as7716-32xb/modules/accton_i2c_cpld.c | 259 +++ .../as7716_32xb-platform-monitor.service | 17 + .../as7716-32xb/setup.py | 16 + .../as7716-32xb/utils/README | 117 + .../utils/accton_as7716_32xb_drv_handler.py | 443 ++++ .../utils/accton_as7716_32xb_monitor.py | 227 ++ .../utils/accton_as7716_32xb_util.py | 616 +++++ .../as7816-64x/classes/__init__.py | 0 .../as7816-64x/classes/fanutil.py | 0 .../as7816-64x/classes/thermalutil.py | 0 .../as7816-64x/modules/Makefile | 2 + .../as7816-64x/modules/accton_i2c_cpld.c | 1 + .../modules/x86-64-accton-as7816-64x-fan.c | 466 ++++ .../modules/x86-64-accton-as7816-64x-leds.c | 460 ++++ .../modules/x86-64-accton-as7816-64x-psu.c | 239 ++ .../modules/x86-64-accton-as7816-64x-sfp.c | 1576 +++++++++++++ .../as7816-64x/modules/ym2651y.c | 1 + .../service/as7816-platform-init.service | 13 + .../as7816-64x/setup.py | 16 + .../as7816-64x/utils/README | 60 + .../as7816-64x/utils/accton_as7816_util.py | 523 +++++ .../common/modules/accton_i2c_cpld.c | 887 ++++++++ .../common/modules/accton_pmbus_3y.c | 1978 +++++++++++++++++ .../common/modules/cpr_4011_4mxx.c | 402 ++++ .../common/modules/pmbus.h | 389 ++++ .../common/modules/ym2651y.c | 619 ++++++ .../debian/changelog | 18 + .../debian/compat | 1 + .../debian/control | 41 + .../debian/rules | 86 + .../broadcom/sonic-platform-modules-ingrasys | 1 - .../.gitignore | 33 + .../sonic-platform-modules-ingrasys/LICENSE | 674 ++++++ .../debian/changelog | 22 + .../debian/compat | 1 + .../debian/control | 26 + .../debian/rules | 80 + .../sonic-platform-ingrasys-s8810-32q.dirs | 3 + .../sonic-platform-ingrasys-s8810-32q.install | 3 + ...sonic-platform-ingrasys-s8810-32q.postinst | 43 + .../sonic-platform-ingrasys-s8810-32q.postrm | 38 + .../sonic-platform-ingrasys-s8810-32q.prerm | 17 + .../sonic-platform-ingrasys-s8810-32q.upstart | 6 + .../sonic-platform-ingrasys-s8900-54xc.dirs | 3 + ...sonic-platform-ingrasys-s8900-54xc.install | 3 + ...onic-platform-ingrasys-s8900-54xc.postinst | 43 + .../sonic-platform-ingrasys-s8900-54xc.postrm | 38 + .../sonic-platform-ingrasys-s8900-54xc.prerm | 17 + ...sonic-platform-ingrasys-s8900-54xc.upstart | 6 + .../sonic-platform-ingrasys-s8900-64xc.dirs | 3 + ...sonic-platform-ingrasys-s8900-64xc.install | 3 + ...onic-platform-ingrasys-s8900-64xc.postinst | 42 + .../sonic-platform-ingrasys-s8900-64xc.postrm | 38 + .../sonic-platform-ingrasys-s8900-64xc.prerm | 15 + ...sonic-platform-ingrasys-s8900-64xc.upstart | 6 + .../debian/sonic-platform-ingrasys-s9100.dirs | 3 + .../sonic-platform-ingrasys-s9100.install | 3 + .../sonic-platform-ingrasys-s9100.postinst | 43 + .../sonic-platform-ingrasys-s9100.postrm | 38 + .../sonic-platform-ingrasys-s9100.prerm | 17 + .../sonic-platform-ingrasys-s9100.upstart | 6 + .../sonic-platform-ingrasys-s9200-64x.dirs | 3 + .../sonic-platform-ingrasys-s9200-64x.install | 3 + ...sonic-platform-ingrasys-s9200-64x.postinst | 43 + .../sonic-platform-ingrasys-s9200-64x.postrm | 38 + .../sonic-platform-ingrasys-s9200-64x.prerm | 17 + .../sonic-platform-ingrasys-s9200-64x.upstart | 6 + .../s8810-32q/README.md | 185 ++ .../s8810-32q/modules/Makefile | 2 + .../s8810-32q/modules/eeprom_mb.c | 212 ++ .../modules/ingrasys_s8810_32q_platform.h | 148 ++ .../modules/ingrasys_s8810_32q_psu.c | 393 ++++ .../s8810-32q/service/qsfp-monitor.service | 15 + .../service/s8810-32q-monitor.service | 19 + .../s8810-32q/utils/i2c_utils.sh | 1452 ++++++++++++ .../s8810-32q/utils/qsfp_monitor.sh | 104 + .../s8810-32q/utils/s8810_32q_monitor.sh | 39 + .../s8900-54xc/README.md | 185 ++ .../s8900-54xc/modules/Makefile | 2 + .../s8900-54xc/modules/eeprom_mb.c | 212 ++ .../s8900-54xc/modules/i2c_cpld.c | 448 ++++ .../s8900-54xc/modules/i2c_cpld.h | 197 ++ .../s8900-54xc/service/qsfp-monitor.service | 15 + .../service/s8900-54xc-monitor.service | 18 + .../s8900-54xc/utils/i2c_utils.sh | 1485 +++++++++++++ .../s8900-54xc/utils/qsfp_monitor.sh | 106 + .../s8900-54xc/utils/qsfp_si_cfg.sh | 331 +++ .../s8900-54xc/utils/s8900_54xc_monitor.sh | 39 + .../s8900-64xc/README.md | 185 ++ .../s8900-64xc/modules/Makefile | 4 + .../s8900-64xc/modules/eeprom_mb.c | 212 ++ .../s8900-64xc/modules/i2c_cpld.c | 448 ++++ .../s8900-64xc/modules/i2c_cpld.h | 197 ++ .../s8900-64xc/modules/qsfp_cpld.c | 1771 +++++++++++++++ .../s8900-64xc/service/qsfp-monitor.service | 15 + .../service/s8900-64xc-monitor.service | 18 + .../s8900-64xc/utils/i2c_utils.sh | 1157 ++++++++++ .../s8900-64xc/utils/qsfp_monitor.sh | 106 + .../s8900-64xc/utils/qsfp_si_cfg.sh | 409 ++++ .../s8900-64xc/utils/s8900_64xc_monitor.sh | 39 + .../s9100/README.md | 185 ++ .../s9100/modules/Makefile | 2 + .../s9100/modules/eeprom_mb.c | 212 ++ .../s9100/modules/i2c_cpld.c | 448 ++++ .../s9100/modules/i2c_cpld.h | 197 ++ .../s9100/service/qsfp-monitor.service | 15 + .../s9100/service/s9100-monitor.service | 19 + .../s9100/utils/i2c_utils.sh | 1518 +++++++++++++ .../s9100/utils/qsfp_monitor.sh | 104 + .../s9100/utils/qsfp_si_cfg.sh | 339 +++ .../s9100/utils/s9100_monitor.sh | 39 + .../s9200-64x/README.md | 184 ++ .../s9200-64x/modules/Makefile | 3 + .../s9200-64x/modules/cpld.c | 498 +++++ .../s9200-64x/modules/eeprom_mb.c | 267 +++ .../modules/ingrasys_s9200_64x_platform.h | 148 ++ .../modules/ingrasys_s9200_64x_psu.c | 389 ++++ .../s9200-64x/service/qsfp-monitor.service | 15 + .../service/s9200-64x-monitor.service | 19 + .../s9200-64x/utils/i2c_utils.sh | 1942 ++++++++++++++++ .../s9200-64x/utils/qsfp_monitor.sh | 104 + .../s9200-64x/utils/qsfp_si_cfg.sh | 230 ++ .../s9200-64x/utils/s9200_64x_monitor.sh | 39 + .../broadcom/sonic-platform-modules-mitac | 1 - .../sonic-platform-modules-mitac/.gitignore | 17 + .../sonic-platform-modules-mitac/LICENSE | 16 + .../sonic-platform-modules-mitac/README.md | 1 + .../debian/changelog | 5 + .../debian/compat | 1 + .../debian/control | 12 + .../sonic-platform-modules-mitac/debian/rules | 41 + .../sonic-platform-mitac-ly1200-32x.init | 51 + .../sonic-platform-mitac-ly1200-32x.upstart | 5 + .../ly1200-32x/etc/init.d/fan-ctrld | 35 + .../ly1200-32x/etc/init.d/gpe | 39 + .../ly1200-32x/etc/init.d/i2c_init | 214 ++ .../ly1200-32x/etc/init.d/sys_polld | 48 + .../ly1200-32x/etc/init.d/sys_servd | 28 + .../ly1200-32x/etc/init.d/xcvr_servd | 28 + .../ly1200-32x/etc/rc0.d/K02xcvr_servd | 1 + .../ly1200-32x/etc/rc1.d/K02xcvr_servd | 1 + .../ly1200-32x/etc/rc6.d/K02xcvr_servd | 1 + .../ly1200-32x/modules/Makefile | 5 + .../ly1200-32x/modules/bms_i2c.h | 26 + .../ly1200-32x/modules/master_cpld_reg.h | 275 +++ .../ly1200-32x/modules/master_cpld_sysfs.h | 226 ++ .../modules/mitac_ly1200_32x_cb_i2c.c | 163 ++ .../modules/mitac_ly1200_32x_fb_i2c.c | 153 ++ .../modules/mitac_ly1200_32x_fb_module_i2c.c | 138 ++ .../modules/mitac_ly1200_32x_fse000.c | 1787 +++++++++++++++ .../ly1200-32x/modules/mitac_ly1200_32x_gpe.c | 93 + .../modules/mitac_ly1200_32x_master_cpld.c | 503 +++++ .../modules/mitac_ly1200_32x_pb_i2c.c | 137 ++ .../modules/mitac_ly1200_32x_sb_i2c.c | 514 +++++ .../modules/mitac_ly1200_32x_slave_cpld.c | 427 ++++ .../modules/mitac_ly1200_32x_system_cpld.c | 541 +++++ .../ly1200-32x/modules/pmbus.h | 366 +++ .../ly1200-32x/modules/slave_cpld_reg.h | 192 ++ .../ly1200-32x/modules/slave_cpld_sysfs.h | 155 ++ .../ly1200-32x/modules/system_cpld_reg.h | 107 + .../ly1200-32x/modules/system_cpld_sysfs.h | 76 + .../ly1200-32x/opt/fan-ctrl/fan-ctrl | 679 ++++++ .../opt/fan-ctrl/fan-zone-thermal_B2F.conf | 12 + .../opt/fan-ctrl/fan-zone-thermal_F2B.conf | 12 + .../ly1200-32x/opt/fan-ctrl/fan-zone_B2F.conf | 38 + .../ly1200-32x/opt/fan-ctrl/fan-zone_F2B.conf | 38 + .../ly1200-32x/opt/fan-ctrl/funcs.sh | 22 + .../ly1200-32x/opt/fan-ctrl/init.sh | 26 + .../ly1200-32x/opt/script/funcs.sh | 23 + .../ly1200-32x/opt/script/start_service.sh | 99 + .../ly1200-32x/opt/script/start_watchdog.sh | 32 + .../ly1200-32x/opt/sys-serv/sys-servd | Bin 0 -> 56280 bytes .../opt/system-check/system-check.sh | 55 + .../ly1200-32x/opt/watchdog/watchdog.conf | 45 + .../ly1200-32x/opt/xcvr-serv/xcvr-servd | Bin 0 -> 31456 bytes .../broadcom/sonic-platform-modules-quanta | 1 - .../sonic-platform-modules-quanta/.gitignore | 37 + .../sonic-platform-modules-quanta/LICENSE | 16 + .../sonic-platform-modules-quanta/README.md | 2 + .../debian/changelog | 6 + .../debian/compat | 1 + .../debian/control | 12 + .../debian/rules | 86 + .../ix1b-32x/classes/__init__.py | 0 .../ix1b-32x/modules/Makefile | 3 + .../ix1b-32x/modules/pmbus.h | 387 ++++ .../ix1b-32x/modules/qci_cpld_qsfp28.c | 409 ++++ .../ix1b-32x/modules/qci_platform.h | 64 + .../ix1b-32x/modules/qci_platform_ix1b.c | 491 ++++ .../ix1b-32x/modules/qci_pmbus.c | 487 ++++ .../service/ix1b-platform-init.service | 13 + .../ix1b-32x/setup.py | 16 + .../ix1b-32x/utils/quanta_ix1b_util.py | 203 ++ 298 files changed, 72066 insertions(+), 16 deletions(-) delete mode 160000 platform/broadcom/sonic-platform-modules-accton create mode 100644 platform/broadcom/sonic-platform-modules-accton/.gitignore create mode 100644 platform/broadcom/sonic-platform-modules-accton/LICENSE create mode 100644 platform/broadcom/sonic-platform-modules-accton/README.md create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/__init__.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/fanutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/thermalutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/Makefile create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_fan.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_psu.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_sfp.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/cpr_4011_4mxx.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/i2c-mux-accton_as5712_54x_cpld.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/leds-accton_as5712_54x.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/ym2651y.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/service/as5712-platform-monitor.service create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/setup.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/README create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/accton_as5712_monitor.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/accton_as5712_util.py create mode 100644 platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/accton_i2c_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-fan.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-leds.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-psu.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-sfp.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/ym2651y.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5812-54t/service/as5812-platform-init.service create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5812-54t/utils/README create mode 100755 platform/broadcom/sonic-platform-modules-accton/as5812-54t/utils/accton_as5812_54t_util.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/__init__.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/fanutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/thermalutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/Makefile create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_fan.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_leds.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_psu.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_sfp.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_i2c_cpld.c create mode 120000 platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/ym2651y.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/service/as7312-platform-monitor.service create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/setup.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/README create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/accton_as7312_monitor.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/accton_as7312_util.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/__init__.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/fanutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/thermalutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/Makefile create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_fan.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_leds.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_psu.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_i2c_cpld.c create mode 120000 platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/ym2651y.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/service/as7326-platform-monitor.service create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/setup.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/README create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/accton_as7326_monitor.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/accton_as7326_util.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7712-32x/classes/__init__.py create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_fan.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_psu.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_sfp.c create mode 120000 platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_i2c_cpld.c create mode 120000 platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_pmbus_3y.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/leds-accton_as7712_32x.c create mode 120000 platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/pmbus.h create mode 120000 platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/ym2651y.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7712-32x/service/as7712-platform-init.service create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7712-32x/setup.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7712-32x/utils/README create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7712-32x/utils/accton_as7712_util.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/__init__.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/fanutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/thermalutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/Makefile create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_cpld1.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_fan.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_leds.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_psu.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_sfp.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_i2c_cpld.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/cpr_4011_4mxx.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/optoe.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/ym2651y.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/service/as7716-platform-monitor.service create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/setup.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/README create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/accton_as7716_monitor.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/accton_as7716_util.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/__init__.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/fanutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/thermalutil.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/Makefile create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_cpld1.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_fan.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_leds.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_oom.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_pmbus.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_psu.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_sfp.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_sys.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_thermal.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_i2c_cpld.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/service/as7716_32xb-platform-monitor.service create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/setup.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/README create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_drv_handler.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_monitor.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_util.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7816-64x/classes/__init__.py create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7816-64x/classes/fanutil.py create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7816-64x/classes/thermalutil.py create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/Makefile create mode 120000 platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/accton_i2c_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-fan.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-leds.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-psu.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-sfp.c create mode 120000 platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/ym2651y.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7816-64x/service/as7816-platform-init.service create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7816-64x/setup.py create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7816-64x/utils/README create mode 100755 platform/broadcom/sonic-platform-modules-accton/as7816-64x/utils/accton_as7816_util.py create mode 100644 platform/broadcom/sonic-platform-modules-accton/common/modules/accton_i2c_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/common/modules/accton_pmbus_3y.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/common/modules/cpr_4011_4mxx.c create mode 100644 platform/broadcom/sonic-platform-modules-accton/common/modules/pmbus.h create mode 100644 platform/broadcom/sonic-platform-modules-accton/common/modules/ym2651y.c create mode 100755 platform/broadcom/sonic-platform-modules-accton/debian/changelog create mode 100644 platform/broadcom/sonic-platform-modules-accton/debian/compat create mode 100755 platform/broadcom/sonic-platform-modules-accton/debian/control create mode 100755 platform/broadcom/sonic-platform-modules-accton/debian/rules delete mode 160000 platform/broadcom/sonic-platform-modules-ingrasys create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/.gitignore create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/LICENSE create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/changelog create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/compat create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/control create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/rules create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.install create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postinst create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postrm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.prerm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.upstart create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.install create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postinst create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postrm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.prerm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.upstart create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.install create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postinst create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postrm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.prerm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.upstart create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.install create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postinst create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postrm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.prerm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.upstart create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.dirs create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.install create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postinst create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postrm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.prerm create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.upstart create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/README.md create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/Makefile create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/eeprom_mb.c create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/ingrasys_s8810_32q_platform.h create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/ingrasys_s8810_32q_psu.c create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/service/qsfp-monitor.service create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/service/s8810-32q-monitor.service create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/qsfp_monitor.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/s8810_32q_monitor.sh create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/README.md create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/eeprom_mb.c create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/i2c_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/i2c_cpld.h create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/service/qsfp-monitor.service create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/service/s8900-54xc-monitor.service create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/i2c_utils.sh create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/qsfp_monitor.sh create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/qsfp_si_cfg.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/s8900_54xc_monitor.sh create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/README.md create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/eeprom_mb.c create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/i2c_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/i2c_cpld.h create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/qsfp_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/service/qsfp-monitor.service create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/service/s8900-64xc-monitor.service create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/i2c_utils.sh create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/qsfp_monitor.sh create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/qsfp_si_cfg.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/s8900_64xc_monitor.sh create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s9100/README.md create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/Makefile create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/eeprom_mb.c create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/i2c_cpld.c create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/i2c_cpld.h create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s9100/service/qsfp-monitor.service create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s9100/service/s9100-monitor.service create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/i2c_utils.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/qsfp_monitor.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/qsfp_si_cfg.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/s9100_monitor.sh create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/README.md create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/Makefile create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/cpld.c create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/eeprom_mb.c create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/ingrasys_s9200_64x_platform.h create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/ingrasys_s9200_64x_psu.c create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/service/qsfp-monitor.service create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/service/s9200-64x-monitor.service create mode 100644 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/i2c_utils.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/qsfp_monitor.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/qsfp_si_cfg.sh create mode 100755 platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/s9200_64x_monitor.sh delete mode 160000 platform/broadcom/sonic-platform-modules-mitac create mode 100644 platform/broadcom/sonic-platform-modules-mitac/.gitignore create mode 100644 platform/broadcom/sonic-platform-modules-mitac/LICENSE create mode 100644 platform/broadcom/sonic-platform-modules-mitac/README.md create mode 100644 platform/broadcom/sonic-platform-modules-mitac/debian/changelog create mode 100644 platform/broadcom/sonic-platform-modules-mitac/debian/compat create mode 100644 platform/broadcom/sonic-platform-modules-mitac/debian/control create mode 100755 platform/broadcom/sonic-platform-modules-mitac/debian/rules create mode 100644 platform/broadcom/sonic-platform-modules-mitac/debian/sonic-platform-mitac-ly1200-32x.init create mode 100644 platform/broadcom/sonic-platform-modules-mitac/debian/sonic-platform-mitac-ly1200-32x.upstart create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/fan-ctrld create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/gpe create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/i2c_init create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/sys_polld create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/sys_servd create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/xcvr_servd create mode 120000 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc0.d/K02xcvr_servd create mode 120000 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc1.d/K02xcvr_servd create mode 120000 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc6.d/K02xcvr_servd create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/bms_i2c.h create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/master_cpld_reg.h create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/master_cpld_sysfs.h create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_cb_i2c.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fb_i2c.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fb_module_i2c.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fse000.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_gpe.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_master_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_pb_i2c.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_sb_i2c.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_slave_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_system_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/pmbus.h create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/slave_cpld_reg.h create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/slave_cpld_sysfs.h create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/system_cpld_reg.h create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/system_cpld_sysfs.h create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-ctrl create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone-thermal_B2F.conf create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone-thermal_F2B.conf create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone_B2F.conf create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone_F2B.conf create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/funcs.sh create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/init.sh create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/funcs.sh create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/start_service.sh create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/start_watchdog.sh create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/sys-serv/sys-servd create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/system-check/system-check.sh create mode 100644 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/watchdog/watchdog.conf create mode 100755 platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/xcvr-serv/xcvr-servd delete mode 160000 platform/broadcom/sonic-platform-modules-quanta create mode 100755 platform/broadcom/sonic-platform-modules-quanta/.gitignore create mode 100755 platform/broadcom/sonic-platform-modules-quanta/LICENSE create mode 100644 platform/broadcom/sonic-platform-modules-quanta/README.md create mode 100755 platform/broadcom/sonic-platform-modules-quanta/debian/changelog create mode 100755 platform/broadcom/sonic-platform-modules-quanta/debian/compat create mode 100755 platform/broadcom/sonic-platform-modules-quanta/debian/control create mode 100755 platform/broadcom/sonic-platform-modules-quanta/debian/rules create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/classes/__init__.py create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/Makefile create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/pmbus.h create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_cpld_qsfp28.c create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_platform.h create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_platform_ix1b.c create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_pmbus.c create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/service/ix1b-platform-init.service create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/setup.py create mode 100755 platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/utils/quanta_ix1b_util.py diff --git a/.gitmodules b/.gitmodules index f0cbe5c2a38c..73ab4bf8ba13 100755 --- a/.gitmodules +++ b/.gitmodules @@ -47,18 +47,12 @@ path = platform/broadcom/sonic-platform-modules-dell url = https://github.com/lguohan/sonic-platform-modules-dell branch = stretch -[submodule "platform/broadcom/sonic-platform-modules-ingrasys"] - path = platform/broadcom/sonic-platform-modules-ingrasys - url = https://github.com/Ingrasys-sonic/sonic-platform-modules-ingrasys [submodule "src/sonic-platform-common"] path = src/sonic-platform-common url = https://github.com/Azure/sonic-platform-common [submodule "src/sonic-platform-daemons"] path = src/sonic-platform-daemons url = https://github.com/Azure/sonic-platform-daemons -[submodule "platform/broadcom/sonic-platform-modules-accton"] - path = platform/broadcom/sonic-platform-modules-accton - url = https://github.com/edge-core/sonic-platform-modules-accton.git [submodule "src/sonic-frr/frr"] path = src/sonic-frr/frr url = https://github.com/FRRouting/frr.git @@ -71,12 +65,6 @@ [submodule "platform/nephos/sonic-platform-modules-ingrasys"] path = platform/nephos/sonic-platform-modules-ingrasys url = https://github.com/Ingrasys-sonic/sonic-platform-modules-ingrasys-nephos.git -[submodule "platform/broadcom/sonic-platform-modules-quanta"] - path = platform/broadcom/sonic-platform-modules-quanta - url = https://github.com/QuantaSwitchONIE/sonic-platform-modules-quanta.git -[submodule "platform/broadcom/sonic-platform-modules-mitac"] - path = platform/broadcom/sonic-platform-modules-mitac - url = https://github.com/MiTAC-EBU/sonic-platform-modules-mitac.git [submodule "platform/barefoot/sonic-platform-modules-arista"] path = platform/barefoot/sonic-platform-modules-arista url = https://github.com/aristanetworks/sonic diff --git a/platform/broadcom/sonic-platform-modules-accton b/platform/broadcom/sonic-platform-modules-accton deleted file mode 160000 index 406c4e675ea7..000000000000 --- a/platform/broadcom/sonic-platform-modules-accton +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 406c4e675ea73d52827b520958c9956551a94e8e diff --git a/platform/broadcom/sonic-platform-modules-accton/.gitignore b/platform/broadcom/sonic-platform-modules-accton/.gitignore new file mode 100644 index 000000000000..f805e810e5c6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/.gitignore @@ -0,0 +1,33 @@ +# Object files +*.o +*.ko +*.obj +*.elf + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su diff --git a/platform/broadcom/sonic-platform-modules-accton/LICENSE b/platform/broadcom/sonic-platform-modules-accton/LICENSE new file mode 100644 index 000000000000..bc693f7a4c40 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/LICENSE @@ -0,0 +1,16 @@ +Copyright (C) 2016 Microsoft, Inc +Copyright (C) 2017 Accton Technology Corporation + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/broadcom/sonic-platform-modules-accton/README.md b/platform/broadcom/sonic-platform-modules-accton/README.md new file mode 100644 index 000000000000..0ff20bb2d21b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/README.md @@ -0,0 +1 @@ +platform drivers of Accton products for the SONiC project diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/__init__.py b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/__init__.py new file mode 100755 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/fanutil.py b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/fanutil.py new file mode 100755 index 000000000000..c16771e214e4 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/fanutil.py @@ -0,0 +1,238 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# +# ------------------------------------------------------------------ + +try: + import time + import logging + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class FanUtil(object): + """Platform-specific FanUtil class""" + + FAN_NUM_ON_MAIN_BROAD = 5 + FAN_NUM_1_IDX = 1 + FAN_NUM_2_IDX = 2 + FAN_NUM_3_IDX = 3 + FAN_NUM_4_IDX = 4 + FAN_NUM_5_IDX = 5 + + FAN_NODE_NUM_OF_MAP = 6 + FAN_NODE_FAULT_IDX_OF_MAP = 1 + FAN_NODE_SPEED_IDX_OF_MAP = 2 + FAN_NODE_DIR_IDX_OF_MAP = 3 + FAN_NODE_DUTY_IDX_OF_MAP = 4 + FANR_NODE_FAULT_IDX_OF_MAP = 5 + FANR_NODE_SPEED_IDX_OF_MAP = 6 + + BASE_VAL_PATH = '/sys/devices/platform/as5712_54x_fan/{0}' + + #logfile = '' + #loglevel = logging.INFO + + """ Dictionary where + key1 = fan id index (integer) starting from 1 + key2 = fan node index (interger) starting from 1 + value = path to fan device file (string) """ + _fan_to_device_path_mapping = {} + + _fan_to_device_node_mapping = { + (FAN_NUM_1_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan1_fault', + (FAN_NUM_1_IDX, FAN_NODE_SPEED_IDX_OF_MAP): 'fan1_speed_rpm', + (FAN_NUM_1_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan1_direction', + (FAN_NUM_1_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan1_duty_cycle_percentage', + (FAN_NUM_1_IDX, FANR_NODE_FAULT_IDX_OF_MAP): 'fanr1_fault', + (FAN_NUM_1_IDX, FANR_NODE_SPEED_IDX_OF_MAP): 'fanr1_speed_rpm', + + (FAN_NUM_2_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan2_fault', + (FAN_NUM_2_IDX, FAN_NODE_SPEED_IDX_OF_MAP): 'fan2_speed_rpm', + (FAN_NUM_2_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan2_direction', + (FAN_NUM_2_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan2_duty_cycle_percentage', + (FAN_NUM_2_IDX, FANR_NODE_FAULT_IDX_OF_MAP): 'fanr2_fault', + (FAN_NUM_2_IDX, FANR_NODE_SPEED_IDX_OF_MAP): 'fanr2_speed_rpm', + + (FAN_NUM_3_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan3_fault', + (FAN_NUM_3_IDX, FAN_NODE_SPEED_IDX_OF_MAP): 'fan3_speed_rpm', + (FAN_NUM_3_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan3_direction', + (FAN_NUM_3_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan3_duty_cycle_percentage', + (FAN_NUM_3_IDX, FANR_NODE_FAULT_IDX_OF_MAP): 'fanr3_fault', + (FAN_NUM_3_IDX, FANR_NODE_SPEED_IDX_OF_MAP): 'fanr3_speed_rpm', + + (FAN_NUM_4_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan4_fault', + (FAN_NUM_4_IDX, FAN_NODE_SPEED_IDX_OF_MAP): 'fan4_speed_rpm', + (FAN_NUM_4_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan4_direction', + (FAN_NUM_4_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan4_duty_cycle_percentage', + (FAN_NUM_4_IDX, FANR_NODE_FAULT_IDX_OF_MAP): 'fanr4_fault', + (FAN_NUM_4_IDX, FANR_NODE_SPEED_IDX_OF_MAP): 'fanr4_speed_rpm', + + (FAN_NUM_5_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan5_fault', + (FAN_NUM_5_IDX, FAN_NODE_SPEED_IDX_OF_MAP): 'fan5_speed_rpm', + (FAN_NUM_5_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan5_direction', + (FAN_NUM_5_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan5_duty_cycle_percentage', + (FAN_NUM_5_IDX, FANR_NODE_FAULT_IDX_OF_MAP): 'fanr5_fault', + (FAN_NUM_5_IDX, FANR_NODE_SPEED_IDX_OF_MAP): 'fanr5_speed_rpm', + } + + def _get_fan_to_device_node(self, fan_num, node_num): + return self._fan_to_device_node_mapping[(fan_num, node_num)] + + def _get_fan_node_val(self, fan_num, node_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + try: + val_file = open(device_path, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + def _set_fan_node_val(self, fan_num, node_num, val): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + content = str(val) + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + try: + val_file = open(device_path, 'w') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + val_file.write(content) + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return True + + def __init__(self): + fan_path = self.BASE_VAL_PATH + + for fan_num in range(self.FAN_NUM_1_IDX, self.FAN_NUM_ON_MAIN_BROAD+1): + for node_num in range(self.FAN_NODE_FAULT_IDX_OF_MAP, self.FAN_NODE_NUM_OF_MAP+1): + self._fan_to_device_path_mapping[(fan_num, node_num)] = fan_path.format( + self._fan_to_device_node_mapping[(fan_num, node_num)]) + + def get_num_fans(self): + return self.FAN_NUM_ON_MAIN_BROAD + + def get_idx_fan_start(self): + return self.FAN_NUM_1_IDX + + def get_num_nodes(self): + return self.FAN_NODE_NUM_OF_MAP + + def get_idx_node_start(self): + return self.FAN_NODE_FAULT_IDX_OF_MAP + + def get_size_node_map(self): + return len(self._fan_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._fan_to_device_path_mapping) + + def get_fan_to_device_path(self, fan_num, node_num): + return self._fan_to_device_path_mapping[(fan_num, node_num)] + + def get_fan_fault(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_FAULT_IDX_OF_MAP) + + def get_fan_speed(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_SPEED_IDX_OF_MAP) + + def get_fan_dir(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_DIR_IDX_OF_MAP) + + def get_fan_duty_cycle(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_DUTY_IDX_OF_MAP) + + def set_fan_duty_cycle(self, fan_num, val): + return self._set_fan_node_val(fan_num, self.FAN_NODE_DUTY_IDX_OF_MAP, val) + + def get_fanr_fault(self, fan_num): + return self._get_fan_node_val(fan_num, self.FANR_NODE_FAULT_IDX_OF_MAP) + + def get_fanr_speed(self, fan_num): + return self._get_fan_node_val(fan_num, self.FANR_NODE_SPEED_IDX_OF_MAP) + + def get_fan_status(self, fan_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num, %d', fan_num) + return None + + if self.get_fan_fault(fan_num) is not None and self.get_fan_fault(fan_num) > 0: + logging.debug('GET. FAN fault. fan_num, %d', fan_num) + return False + + if self.get_fanr_fault(fan_num) is not None and self.get_fanr_fault(fan_num) > 0: + logging.debug('GET. FANR fault. fan_num, %d', fan_num) + return False + + return True + +#def main(): +# fan = FanUtil() +# +# print 'get_size_node_map : %d' % fan.get_size_node_map() +# print 'get_size_path_map : %d' % fan.get_size_path_map() +# for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): +# for y in range(fan.get_idx_node_start(), fan.get_num_nodes()+1): +# print fan.get_fan_to_device_path(x, y) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/thermalutil.py b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/thermalutil.py new file mode 100755 index 000000000000..5b8f890e8819 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/classes/thermalutil.py @@ -0,0 +1,121 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# +# ------------------------------------------------------------------ + +try: + import time + import logging + import glob + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class ThermalUtil(object): + """Platform-specific ThermalUtil class""" + + THERMAL_NUM_ON_MAIN_BROAD = 3 + THERMAL_NUM_1_IDX = 1 # 1_ON_MAIN_BROAD + THERMAL_NUM_2_IDX = 2 # 2_ON_MAIN_BROAD + THERMAL_NUM_3_IDX = 3 # 3_ON_MAIN_BROAD + + BASE_VAL_PATH = '/sys/bus/i2c/devices/{0}-00{1}/hwmon/hwmon*/temp1_input' + + """ Dictionary where + key1 = thermal id index (integer) starting from 1 + value = path to fan device file (string) """ + _thermal_to_device_path_mapping = {} + + _thermal_to_device_node_mapping = { + THERMAL_NUM_1_IDX: ['61', '48'], + THERMAL_NUM_2_IDX: ['62', '49'], + THERMAL_NUM_3_IDX: ['63', '4a'], + } + + def __init__(self): + thermal_path = self.BASE_VAL_PATH + + for x in range(self.THERMAL_NUM_1_IDX, self.THERMAL_NUM_ON_MAIN_BROAD+1): + self._thermal_to_device_path_mapping[x] = thermal_path.format( + self._thermal_to_device_node_mapping[x][0], + self._thermal_to_device_node_mapping[x][1]) + + def _get_thermal_node_val(self, thermal_num): + if thermal_num < self.THERMAL_NUM_1_IDX or thermal_num > self.THERMAL_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. thermal_num, %d', thermal_num) + return None + + device_path = self.get_thermal_to_device_path(thermal_num) + for filename in glob.glob(device_path): + try: + val_file = open(filename, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + + def get_num_thermals(self): + return self.THERMAL_NUM_ON_MAIN_BROAD + + def get_idx_thermal_start(self): + return self.THERMAL_NUM_1_IDX + + def get_size_node_map(self): + return len(self._thermal_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._thermal_to_device_path_mapping) + + def get_thermal_to_device_path(self, thermal_num): + return self._thermal_to_device_path_mapping[thermal_num] + + def get_thermal_1_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + + def get_thermal_2_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) + +#def main(): +# thermal = ThermalUtil() +# +# print 'get_size_node_map : %d' % thermal.get_size_node_map() +# print 'get_size_path_map : %d' % thermal.get_size_path_map() +# for x in range(thermal.get_idx_thermal_start(), thermal.get_num_thermals()+1): +# print thermal.get_thermal_to_device_path(x) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/Makefile b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/Makefile new file mode 100755 index 000000000000..39fe78bf8cae --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/Makefile @@ -0,0 +1,17 @@ +ifneq ($(KERNELRELEASE),) +obj-m:= i2c-mux-accton_as5712_54x_cpld.o \ + accton_as5712_54x_fan.o leds-accton_as5712_54x.o accton_as5712_54x_psu.o \ + cpr_4011_4mxx.o ym2651y.o + +else +ifeq (,$(KERNEL_SRC)) +$(error KERNEL_SRC is not defined) +else +KERNELDIR:=$(KERNEL_SRC) +endif +PWD:=$(shell pwd) +default: + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules +clean: + rm -rf *.o *.mod.o *.mod.o *.ko .*cmd .tmp_versions Module.markers Module.symvers modules.order +endif diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_fan.c b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_fan.c new file mode 100755 index 000000000000..db81a1a8ca97 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_fan.c @@ -0,0 +1,437 @@ +/* + * A hwmon driver for the Accton as5710 54x fan contrl + * + * Copyright (C) 2013 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define FAN_MAX_NUMBER 5 +#define FAN_SPEED_CPLD_TO_RPM_STEP 150 +#define FAN_SPEED_PRECENT_TO_CPLD_STEP 5 +#define FAN_DUTY_CYCLE_MIN 0 /* 10% ??*/ +#define FAN_DUTY_CYCLE_MAX 100 /* 100% */ + +#define CPLD_REG_FAN_STATUS_OFFSET 0xC +#define CPLD_REG_FANR_STATUS_OFFSET 0x1F +#define CPLD_REG_FAN_DIRECTION_OFFSET 0x1E + +#define CPLD_FAN1_REG_SPEED_OFFSET 0x10 +#define CPLD_FAN2_REG_SPEED_OFFSET 0x11 +#define CPLD_FAN3_REG_SPEED_OFFSET 0x12 +#define CPLD_FAN4_REG_SPEED_OFFSET 0x13 +#define CPLD_FAN5_REG_SPEED_OFFSET 0x14 + +#define CPLD_FANR1_REG_SPEED_OFFSET 0x18 +#define CPLD_FANR2_REG_SPEED_OFFSET 0x19 +#define CPLD_FANR3_REG_SPEED_OFFSET 0x1A +#define CPLD_FANR4_REG_SPEED_OFFSET 0x1B +#define CPLD_FANR5_REG_SPEED_OFFSET 0x1C + +#define CPLD_REG_FAN_PWM_CYCLE_OFFSET 0xD + +#define CPLD_FAN1_INFO_BIT_MASK 0x1 +#define CPLD_FAN2_INFO_BIT_MASK 0x2 +#define CPLD_FAN3_INFO_BIT_MASK 0x4 +#define CPLD_FAN4_INFO_BIT_MASK 0x8 +#define CPLD_FAN5_INFO_BIT_MASK 0x10 + +#define PROJECT_NAME + +#define LOCAL_DEBUG 0 + +static struct accton_as5712_54x_fan *fan_data = NULL; + +struct accton_as5712_54x_fan { + struct platform_device *pdev; + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 status[FAN_MAX_NUMBER]; /* inner first fan status */ + u32 speed[FAN_MAX_NUMBER]; /* inner first fan speed */ + u8 direction[FAN_MAX_NUMBER]; /* reconrd the direction of inner first and second fans */ + u32 duty_cycle[FAN_MAX_NUMBER]; /* control the speed of inner first and second fans */ + u8 r_status[FAN_MAX_NUMBER]; /* inner second fan status */ + u32 r_speed[FAN_MAX_NUMBER]; /* inner second fan speed */ +}; + +/*******************/ +#define MAKE_FAN_MASK_OR_REG(name,type) \ + CPLD_FAN##type##1_##name, \ + CPLD_FAN##type##2_##name, \ + CPLD_FAN##type##3_##name, \ + CPLD_FAN##type##4_##name, \ + CPLD_FAN##type##5_##name, + +/* fan related data + */ +static const u8 fan_info_mask[] = { + MAKE_FAN_MASK_OR_REG(INFO_BIT_MASK,) +}; + +static const u8 fan_speed_reg[] = { + MAKE_FAN_MASK_OR_REG(REG_SPEED_OFFSET,) +}; + +static const u8 fanr_speed_reg[] = { + MAKE_FAN_MASK_OR_REG(REG_SPEED_OFFSET,R) +}; + +/*******************/ +#define DEF_FAN_SET(id) \ + FAN##id##_FAULT, \ + FAN##id##_SPEED, \ + FAN##id##_DUTY_CYCLE, \ + FAN##id##_DIRECTION, \ + FANR##id##_FAULT, \ + FANR##id##_SPEED, + +enum sysfs_fan_attributes { + DEF_FAN_SET(1) + DEF_FAN_SET(2) + DEF_FAN_SET(3) + DEF_FAN_SET(4) + DEF_FAN_SET(5) +}; +/*******************/ +static void accton_as5712_54x_fan_update_device(struct device *dev); +static int accton_as5712_54x_fan_read_value(u8 reg); +static int accton_as5712_54x_fan_write_value(u8 reg, u8 value); + +static ssize_t fan_set_duty_cycle(struct device *dev, + struct device_attribute *da,const char *buf, size_t count); +static ssize_t fan_show_value(struct device *dev, + struct device_attribute *da, char *buf); + +extern int as5712_54x_cpld_read(unsigned short cpld_addr, u8 reg); +extern int as5712_54x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + + +/*******************/ +#define _MAKE_SENSOR_DEVICE_ATTR(prj, id) \ + static SENSOR_DEVICE_ATTR(prj##fan##id##_fault, S_IRUGO, fan_show_value, NULL, FAN##id##_FAULT); \ + static SENSOR_DEVICE_ATTR(prj##fan##id##_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##id##_SPEED); \ + static SENSOR_DEVICE_ATTR(prj##fan##id##_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_show_value, \ + fan_set_duty_cycle, FAN##id##_DUTY_CYCLE); \ + static SENSOR_DEVICE_ATTR(prj##fan##id##_direction, S_IRUGO, fan_show_value, NULL, FAN##id##_DIRECTION); \ + static SENSOR_DEVICE_ATTR(prj##fanr##id##_fault, S_IRUGO, fan_show_value, NULL, FANR##id##_FAULT); \ + static SENSOR_DEVICE_ATTR(prj##fanr##id##_speed_rpm, S_IRUGO, fan_show_value, NULL, FANR##id##_SPEED); + +#define MAKE_SENSOR_DEVICE_ATTR(prj,id) _MAKE_SENSOR_DEVICE_ATTR(prj,id) + +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 1) +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 2) +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 3) +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 4) +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 5) +/*******************/ + +#define _MAKE_FAN_ATTR(prj, id) \ + &sensor_dev_attr_##prj##fan##id##_fault.dev_attr.attr, \ + &sensor_dev_attr_##prj##fan##id##_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_##prj##fan##id##_duty_cycle_percentage.dev_attr.attr,\ + &sensor_dev_attr_##prj##fan##id##_direction.dev_attr.attr, \ + &sensor_dev_attr_##prj##fanr##id##_fault.dev_attr.attr, \ + &sensor_dev_attr_##prj##fanr##id##_speed_rpm.dev_attr.attr, + +#define MAKE_FAN_ATTR(prj, id) _MAKE_FAN_ATTR(prj, id) + +static struct attribute *accton_as5712_54x_fan_attributes[] = { + /* fan related attributes */ + MAKE_FAN_ATTR(PROJECT_NAME,1) + MAKE_FAN_ATTR(PROJECT_NAME,2) + MAKE_FAN_ATTR(PROJECT_NAME,3) + MAKE_FAN_ATTR(PROJECT_NAME,4) + MAKE_FAN_ATTR(PROJECT_NAME,5) + NULL +}; +/*******************/ + +/* fan related functions + */ +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + ssize_t ret = 0; + int data_index, type_index; + + accton_as5712_54x_fan_update_device(dev); + + if (fan_data->valid == 0) { + return ret; + } + + type_index = attr->index%FAN2_FAULT; + data_index = attr->index/FAN2_FAULT; + + switch (type_index) { + case FAN1_FAULT: + ret = sprintf(buf, "%d\n", fan_data->status[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FAN1_SPEED: + ret = sprintf(buf, "%d\n", fan_data->speed[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FAN1_DUTY_CYCLE: + ret = sprintf(buf, "%d\n", fan_data->duty_cycle[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FAN1_DIRECTION: + ret = sprintf(buf, "%d\n", fan_data->direction[data_index]); /* presnet, need to modify*/ + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FANR1_FAULT: + ret = sprintf(buf, "%d\n", fan_data->r_status[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FANR1_SPEED: + ret = sprintf(buf, "%d\n", fan_data->r_speed[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + default: + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d] \n", __FUNCTION__, __LINE__); + break; + } + + return ret; +} +/*******************/ +static ssize_t fan_set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { + + int error, value; + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < FAN_DUTY_CYCLE_MIN || value > FAN_DUTY_CYCLE_MAX) + return -EINVAL; + + accton_as5712_54x_fan_write_value(CPLD_REG_FAN_PWM_CYCLE_OFFSET, value/FAN_SPEED_PRECENT_TO_CPLD_STEP); + + fan_data->valid = 0; + + return count; +} + +static const struct attribute_group accton_as5712_54x_fan_group = { + .attrs = accton_as5712_54x_fan_attributes, +}; + +static int accton_as5712_54x_fan_read_value(u8 reg) +{ + return as5712_54x_cpld_read(0x60, reg); +} + +static int accton_as5712_54x_fan_write_value(u8 reg, u8 value) +{ + return as5712_54x_cpld_write(0x60, reg, value); +} + +static void accton_as5712_54x_fan_update_device(struct device *dev) +{ + int speed, r_speed, fault, r_fault, ctrl_speed, direction; + int i; + + mutex_lock(&fan_data->update_lock); + + if (LOCAL_DEBUG) + printk ("Starting accton_as5712_54x_fan update \n"); + + if (!(time_after(jiffies, fan_data->last_updated + HZ + HZ / 2) || !fan_data->valid)) { + /* do nothing */ + goto _exit; + } + + fan_data->valid = 0; + + if (LOCAL_DEBUG) + printk ("Starting accton_as5712_54x_fan update 2 \n"); + + fault = accton_as5712_54x_fan_read_value(CPLD_REG_FAN_STATUS_OFFSET); + r_fault = accton_as5712_54x_fan_read_value(CPLD_REG_FANR_STATUS_OFFSET); + direction = accton_as5712_54x_fan_read_value(CPLD_REG_FAN_DIRECTION_OFFSET); + ctrl_speed = accton_as5712_54x_fan_read_value(CPLD_REG_FAN_PWM_CYCLE_OFFSET); + + if ( (fault < 0) || (r_fault < 0) || (direction < 0) || (ctrl_speed < 0) ) + { + if (LOCAL_DEBUG) + printk ("[Error!!][%s][%d] \n", __FUNCTION__, __LINE__); + goto _exit; /* error */ + } + + if (LOCAL_DEBUG) + printk ("[fan:] fault:%d, r_fault=%d, direction=%d, ctrl_speed=%d \n",fault, r_fault, direction, ctrl_speed); + + for (i=0; istatus[i] = (fault & fan_info_mask[i]) >> i; + if (LOCAL_DEBUG) + printk ("[fan%d:] fail=%d \n",i, fan_data->status[i]); + + fan_data->r_status[i] = (r_fault & fan_info_mask[i]) >> i; + fan_data->direction[i] = (direction & fan_info_mask[i]) >> i; + fan_data->duty_cycle[i] = ctrl_speed * FAN_SPEED_PRECENT_TO_CPLD_STEP; + + /* fan speed + */ + speed = accton_as5712_54x_fan_read_value(fan_speed_reg[i]); + r_speed = accton_as5712_54x_fan_read_value(fanr_speed_reg[i]); + if ( (speed < 0) || (r_speed < 0) ) + { + if (LOCAL_DEBUG) + printk ("[Error!!][%s][%d] \n", __FUNCTION__, __LINE__); + goto _exit; /* error */ + } + + if (LOCAL_DEBUG) + printk ("[fan%d:] speed:%d, r_speed=%d \n", i, speed, r_speed); + + fan_data->speed[i] = speed * FAN_SPEED_CPLD_TO_RPM_STEP; + fan_data->r_speed[i] = r_speed * FAN_SPEED_CPLD_TO_RPM_STEP; + } + + /* finish to update */ + fan_data->last_updated = jiffies; + fan_data->valid = 1; + +_exit: + mutex_unlock(&fan_data->update_lock); +} + +static int accton_as5712_54x_fan_probe(struct platform_device *pdev) +{ + int status = -1; + + /* Register sysfs hooks */ + status = sysfs_create_group(&pdev->dev.kobj, &accton_as5712_54x_fan_group); + if (status) { + goto exit; + + } + + fan_data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(fan_data->hwmon_dev)) { + status = PTR_ERR(fan_data->hwmon_dev); + goto exit_remove; + } + + dev_info(&pdev->dev, "accton_as5712_54x_fan\n"); + + return 0; + +exit_remove: + sysfs_remove_group(&pdev->dev.kobj, &accton_as5712_54x_fan_group); +exit: + return status; +} + +static int accton_as5712_54x_fan_remove(struct platform_device *pdev) +{ + hwmon_device_unregister(fan_data->hwmon_dev); + sysfs_remove_group(&fan_data->pdev->dev.kobj, &accton_as5712_54x_fan_group); + + return 0; +} + +#define DRVNAME "as5712_54x_fan" + +static struct platform_driver accton_as5712_54x_fan_driver = { + .probe = accton_as5712_54x_fan_probe, + .remove = accton_as5712_54x_fan_remove, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init accton_as5712_54x_fan_init(void) +{ + int ret; + + ret = platform_driver_register(&accton_as5712_54x_fan_driver); + if (ret < 0) { + goto exit; + } + + fan_data = kzalloc(sizeof(struct accton_as5712_54x_fan), GFP_KERNEL); + if (!fan_data) { + ret = -ENOMEM; + platform_driver_unregister(&accton_as5712_54x_fan_driver); + goto exit; + } + + mutex_init(&fan_data->update_lock); + fan_data->valid = 0; + + fan_data->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(fan_data->pdev)) { + ret = PTR_ERR(fan_data->pdev); + platform_driver_unregister(&accton_as5712_54x_fan_driver); + kfree(fan_data); + goto exit; + } + +exit: + return ret; +} + +static void __exit accton_as5712_54x_fan_exit(void) +{ + platform_device_unregister(fan_data->pdev); + platform_driver_unregister(&accton_as5712_54x_fan_driver); + kfree(fan_data); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_as5712_54x_fan driver"); +MODULE_LICENSE("GPL"); + +module_init(accton_as5712_54x_fan_init); +module_exit(accton_as5712_54x_fan_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_psu.c b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_psu.c new file mode 100755 index 000000000000..9a0d1dae58ba --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_psu.c @@ -0,0 +1,371 @@ +/* + * An hwmon driver for accton as5712_54x Power Module + * + * Copyright (C) 2015 Accton Technology Corporation. + * Copyright (C) Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define PSU_STATUS_I2C_ADDR 0x60 +#define PSU_STATUS_I2C_REG_OFFSET 0x2 + +#define IS_POWER_GOOD(id, value) (!!(value & BIT(id*4 + 1))) +#define IS_PRESENT(id, value) (!(value & BIT(id*4))) + +static ssize_t show_index(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, char *buf); +static int as5712_54x_psu_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int as5712_54x_cpld_read(unsigned short cpld_addr, u8 reg); +static int as5712_54x_psu_model_name_get(struct device *dev); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as5712_54x_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ + char model_name[14]; /* Model name, read from eeprom */ +}; + +static struct as5712_54x_psu_data *as5712_54x_psu_update_device(struct device *dev); + +enum as5712_54x_psu_sysfs_attributes { + PSU_INDEX, + PSU_PRESENT, + PSU_MODEL_NAME, + PSU_POWER_GOOD +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_index, S_IRUGO, show_index, NULL, PSU_INDEX); +static SENSOR_DEVICE_ATTR(psu_present, S_IRUGO, show_status, NULL, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_model_name, S_IRUGO, show_model_name,NULL, PSU_MODEL_NAME); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_status, NULL, PSU_POWER_GOOD); + +static struct attribute *as5712_54x_psu_attributes[] = { + &sensor_dev_attr_psu_index.dev_attr.attr, + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_model_name.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + NULL +}; + +static ssize_t show_index(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_psu_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d\n", data->index); +} + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as5712_54x_psu_data *data = as5712_54x_psu_update_device(dev); + u8 status = 0; + + if (!data->valid) { + return sprintf(buf, "0\n"); + } + + if (attr->index == PSU_PRESENT) { + status = IS_PRESENT(data->index, data->status); + } + else { /* PSU_POWER_GOOD */ + status = IS_POWER_GOOD(data->index, data->status); + } + + return sprintf(buf, "%d\n", status); +} + +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as5712_54x_psu_data *data = as5712_54x_psu_update_device(dev); + + if (!data->valid) { + return 0; + } + + if (!IS_PRESENT(data->index, data->status)) { + return 0; + } + + if (as5712_54x_psu_model_name_get(dev) < 0) { + return -ENXIO; + } + + return sprintf(buf, "%s\n", data->model_name); +} + +static const struct attribute_group as5712_54x_psu_group = { + .attrs = as5712_54x_psu_attributes, +}; + +static int as5712_54x_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as5712_54x_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as5712_54x_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as5712_54x_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as5712_54x_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as5712_54x_psu_remove(struct i2c_client *client) +{ + struct as5712_54x_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as5712_54x_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as5712_54x_psu1, + as5712_54x_psu2 +}; + +static const struct i2c_device_id as5712_54x_psu_id[] = { + { "as5712_54x_psu1", as5712_54x_psu1 }, + { "as5712_54x_psu2", as5712_54x_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as5712_54x_psu_id); + +static struct i2c_driver as5712_54x_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as5712_54x_psu", + }, + .probe = as5712_54x_psu_probe, + .remove = as5712_54x_psu_remove, + .id_table = as5712_54x_psu_id, + .address_list = normal_i2c, +}; + +static int as5712_54x_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) + goto abort; + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + + result = 0; + +abort: + return result; +} + +enum psu_type { + PSU_YM_2401_JCR, /* AC110V - F2B */ + PSU_YM_2401_JDR, /* AC110V - B2F */ + PSU_CPR_4011_4M11, /* AC110V - F2B */ + PSU_CPR_4011_4M21, /* AC110V - B2F */ + PSU_CPR_6011_2M11, /* AC110V - F2B */ + PSU_CPR_6011_2M21, /* AC110V - B2F */ + PSU_UM400D_01G, /* DC48V - F2B */ + PSU_UM400D01_01G /* DC48V - B2F */ +}; + +struct model_name_info { + enum psu_type type; + u8 offset; + u8 length; + char* model_name; +}; + +struct model_name_info models[] = { +{PSU_YM_2401_JCR, 0x20, 11, "YM-2401JCR"}, +{PSU_YM_2401_JDR, 0x20, 11, "YM-2401JDR"}, +{PSU_CPR_4011_4M11, 0x26, 13, "CPR-4011-4M11"}, +{PSU_CPR_4011_4M21, 0x26, 13, "CPR-4011-4M21"}, +{PSU_CPR_6011_2M11, 0x26, 13, "CPR-6011-2M11"}, +{PSU_CPR_6011_2M21, 0x26, 13, "CPR-6011-2M21"}, +{PSU_UM400D_01G, 0x50, 9, "um400d01G"}, +{PSU_UM400D01_01G, 0x50, 12, "um400d01-01G"}, +}; + +static int as5712_54x_psu_model_name_get(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_psu_data *data = i2c_get_clientdata(client); + int i, status; + + for (i = 0; i < ARRAY_SIZE(models); i++) { + memset(data->model_name, 0, sizeof(data->model_name)); + + status = as5712_54x_psu_read_block(client, models[i].offset, + data->model_name, models[i].length); + if (status < 0) { + data->model_name[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x) offset(0x%x)\n", + client->addr, models[i].offset); + return status; + } + else { + data->model_name[models[i].length] = '\0'; + } + + if (i == PSU_YM_2401_JCR || i == PSU_YM_2401_JDR) { + /* Skip the meaningless data byte 8*/ + data->model_name[8] = data->model_name[9]; + data->model_name[9] = data->model_name[10]; + data->model_name[10] = '\0'; + } + + /* Determine if the model name is known, if not, read next index + */ + if (strncmp(data->model_name, models[i].model_name, models[i].length) == 0) { + return 0; + } + else { + data->model_name[0] = '\0'; + } + } + + return -ENODATA; +} + +static struct as5712_54x_psu_data *as5712_54x_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status = -1; + + dev_dbg(&client->dev, "Starting as5712_54x update\n"); + data->valid = 0; + + + /* Read psu status */ + status = as5712_54x_cpld_read(PSU_STATUS_I2C_ADDR, PSU_STATUS_I2C_REG_OFFSET); + + if (status < 0) { + dev_dbg(&client->dev, "cpld reg (0x%x) err %d\n", PSU_STATUS_I2C_ADDR, status); + goto exit; + } + else { + data->status = status; + } + + data->last_updated = jiffies; + data->valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init as5712_54x_psu_init(void) +{ + return i2c_add_driver(&as5712_54x_psu_driver); +} + +static void __exit as5712_54x_psu_exit(void) +{ + i2c_del_driver(&as5712_54x_psu_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton as5712_54x_psu driver"); +MODULE_LICENSE("GPL"); + +module_init(as5712_54x_psu_init); +module_exit(as5712_54x_psu_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_sfp.c b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_sfp.c new file mode 100755 index 000000000000..d236057c4e59 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/accton_as5712_54x_sfp.c @@ -0,0 +1,825 @@ +/* + * An hwmon driver for accton as5712_54x sfp + * + * Copyright (C) Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NUM_OF_SFF_PORT 54 +#define SFP_PORT_MAX 48 +#define I2C_ADDR_CPLD1 0x60 +#define I2C_ADDR_CPLD2 0x61 +#define I2C_ADDR_CPLD3 0x62 +#define CPLD3_OFFSET_QSFP_MOD_RST 0x15 +#define CPLD3_OFFSET_QSFP_LPMODE 0x16 + + +#define BIT_INDEX(i) (1ULL << (i)) + +#if 0 +static ssize_t show_status(struct device *dev, struct device_attribute *da,char *buf); +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_eeprom(struct device *dev, struct device_attribute *da, char *buf); +static int as5712_54x_sfp_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int as5712_54x_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int as5712_54x_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); +#endif + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as5712_54x_sfp_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + int port; /* Front port index */ + char eeprom[256]; /* eeprom data */ + u64 status[4]; /* bit0:port0, bit1:port1 and so on */ + /* index 0 => is_present + 1 => tx_fail + 2 => tx_disable + 3 => rx_loss */ +}; + +/* The table maps active port to cpld port. + * Array index 0 is for active port 1, + * index 1 for active port 2, and so on. + * The array content implies cpld port index. + */ +static const u8 cpld_to_front_port_table[] = +{ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, + 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, + 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, + 49, 52, 50, 53, 51, 54}; + +#define CPLD_PORT_TO_FRONT_PORT(port) (cpld_to_front_port_table[port]) + +static struct as5712_54x_sfp_data *as5712_54x_sfp_update_device(struct device *dev, int update_eeprom); +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_eeprom(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_lp_mode(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_lp_mode(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_mode_reset(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +extern int as5712_54x_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int as5712_54x_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +enum as5712_54x_sfp_sysfs_attributes { + SFP_IS_PRESENT, + SFP_TX_FAULT, + SFP_TX_DISABLE, + SFP_RX_LOSS, + SFP_PORT_NUMBER, + SFP_EEPROM, + SFP_RX_LOS_ALL, + SFP_IS_PRESENT_ALL, + SFP_LP_MODE, + SFP_MOD_RST, +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(sfp_is_present, S_IRUGO, show_status, NULL, SFP_IS_PRESENT); +static SENSOR_DEVICE_ATTR(sfp_tx_fault, S_IRUGO, show_status, NULL, SFP_TX_FAULT); +static SENSOR_DEVICE_ATTR(sfp_tx_disable, S_IWUSR | S_IRUGO, show_status, set_tx_disable, SFP_TX_DISABLE); +static SENSOR_DEVICE_ATTR(sfp_rx_loss, S_IRUGO, show_status,NULL, SFP_RX_LOSS); +static SENSOR_DEVICE_ATTR(sfp_port_number, S_IRUGO, show_port_number, NULL, SFP_PORT_NUMBER); +static SENSOR_DEVICE_ATTR(sfp_eeprom, S_IRUGO, show_eeprom, NULL, SFP_EEPROM); +static SENSOR_DEVICE_ATTR(sfp_rx_los_all, S_IRUGO, show_status,NULL, SFP_RX_LOS_ALL); +static SENSOR_DEVICE_ATTR(sfp_is_present_all, S_IRUGO, show_status,NULL, SFP_IS_PRESENT_ALL); +static SENSOR_DEVICE_ATTR(sfp_lp_mode, S_IWUSR | S_IRUGO, get_lp_mode, set_lp_mode, SFP_LP_MODE); +static SENSOR_DEVICE_ATTR(sfp_mod_rst, S_IWUSR | S_IRUGO, get_mode_reset, set_mode_reset, SFP_MOD_RST); + +static struct attribute *as5712_54x_sfp_attributes[] = { + &sensor_dev_attr_sfp_is_present.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault.dev_attr.attr, + &sensor_dev_attr_sfp_rx_loss.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable.dev_attr.attr, + &sensor_dev_attr_sfp_eeprom.dev_attr.attr, + &sensor_dev_attr_sfp_port_number.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los_all.dev_attr.attr, + &sensor_dev_attr_sfp_is_present_all.dev_attr.attr, + &sensor_dev_attr_sfp_lp_mode.dev_attr.attr, + &sensor_dev_attr_sfp_mod_rst.dev_attr.attr, + NULL +}; + +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_sfp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d\n", CPLD_PORT_TO_FRONT_PORT(data->port)); +} + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as5712_54x_sfp_data *data; + u8 val; + int values[7]; + + /* Error-check the CPLD read results. */ +#define VALIDATED_READ(_buf, _rv, _read_expr, _invert) \ + do { \ + _rv = (_read_expr); \ + if(_rv < 0) { \ + return sprintf(_buf, "READ ERROR\n"); \ + } \ + if(_invert) { \ + _rv = ~_rv; \ + } \ + _rv &= 0xFF; \ + } while(0) + + if(attr->index == SFP_RX_LOS_ALL) { + /* + * Report the RX_LOS status for all ports. + * This does not depend on the currently active SFP selector. + */ + + /* RX_LOS Ports 1-8 */ + VALIDATED_READ(buf, values[0], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD2, 0x0F), 0); + /* RX_LOS Ports 9-16 */ + VALIDATED_READ(buf, values[1], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD2, 0x10), 0); + /* RX_LOS Ports 17-24 */ + VALIDATED_READ(buf, values[2], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD2, 0x11), 0); + /* RX_LOS Ports 25-32 */ + VALIDATED_READ(buf, values[3], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x0F), 0); + /* RX_LOS Ports 33-40 */ + VALIDATED_READ(buf, values[4], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x10), 0); + /* RX_LOS Ports 41-48 */ + VALIDATED_READ(buf, values[5], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x11), 0); + + /** Return values 1 -> 48 in order */ + return sprintf(buf, "%.2x %.2x %.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], + values[3], values[4], values[5]); + } + + if(attr->index == SFP_IS_PRESENT_ALL) { + /* + * Report the SFP_PRESENCE status for all ports. + * This does not depend on the currently active SFP selector. + */ + + /* SFP_PRESENT Ports 1-8 */ + VALIDATED_READ(buf, values[0], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD2, 0x6), 1); + /* SFP_PRESENT Ports 9-16 */ + VALIDATED_READ(buf, values[1], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD2, 0x7), 1); + /* SFP_PRESENT Ports 17-24 */ + VALIDATED_READ(buf, values[2], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD2, 0x8), 1); + /* SFP_PRESENT Ports 25-32 */ + VALIDATED_READ(buf, values[3], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x6), 1); + /* SFP_PRESENT Ports 33-40 */ + VALIDATED_READ(buf, values[4], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x7), 1); + /* SFP_PRESENT Ports 41-48 */ + VALIDATED_READ(buf, values[5], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x8), 1); + /* QSFP_PRESENT Ports 49-54 */ + VALIDATED_READ(buf, values[6], as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x14), 1); + + /* Return values 1 -> 54 in order */ + return sprintf(buf, "%.2x %.2x %.2x %.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], + values[3], values[4], values[5], + values[6] & 0x3F); + } + /* + * The remaining attributes are gathered on a per-selected-sfp basis. + */ + data = as5712_54x_sfp_update_device(dev, 0); + if (attr->index == SFP_IS_PRESENT) { + val = (data->status[attr->index] & BIT_INDEX(data->port)) ? 0 : 1; + } + else { + val = (data->status[attr->index] & BIT_INDEX(data->port)) ? 1 : 0; + } + + return sprintf(buf, "%d", val); +} + +static ssize_t get_lp_mode(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_sfp_data *data = i2c_get_clientdata(client); + u8 cpld_val = 0; + int port_bit; + int status = -EINVAL; + + /* Low power mode is not supported for SFP ports(1-48) */ + if (data->port < SFP_PORT_MAX) { + return -EINVAL; + } + mutex_lock(&data->update_lock); + + port_bit = data->port - SFP_PORT_MAX; + cpld_val = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, CPLD3_OFFSET_QSFP_LPMODE); + cpld_val = cpld_val & 0x3F; + cpld_val = cpld_val & BIT_INDEX(port_bit); + status = snprintf(buf, PAGE_SIZE - 1, "%d\r\n", cpld_val>>port_bit); + + mutex_unlock(&data->update_lock); + + return status; +} + +static ssize_t set_lp_mode(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_sfp_data *data = i2c_get_clientdata(client); + u8 cpld_val = 0; + long mode; + int error, port_bit; + + /* Tx disable is not supported for QSFP ports(49-54) */ + if (data->port < SFP_PORT_MAX) { + return -EINVAL; + } + port_bit = data->port - SFP_PORT_MAX; + error = kstrtol(buf, 10, &mode); + if (error) { + return error; + } + mutex_lock(&data->update_lock); + + cpld_val = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, CPLD3_OFFSET_QSFP_LPMODE); + /* Update lp_mode status */ + if (mode) + { + cpld_val |= BIT_INDEX(port_bit); + } + else + { + cpld_val &=~BIT_INDEX(port_bit); + } + as5712_54x_i2c_cpld_write(I2C_ADDR_CPLD3, CPLD3_OFFSET_QSFP_LPMODE, cpld_val); + + mutex_unlock(&data->update_lock); + + return count; +} + + +static ssize_t get_mode_reset(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_sfp_data *data = i2c_get_clientdata(client); + u8 cpld_val = 0; + int port_bit; + int status = -EINVAL; + + /* Low power mode is not supported for SFP ports(1-48) */ + if (data->port < SFP_PORT_MAX) { + return -EINVAL; + } + mutex_lock(&data->update_lock); + + port_bit = data->port - SFP_PORT_MAX; + cpld_val = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, CPLD3_OFFSET_QSFP_MOD_RST); + cpld_val = cpld_val & 0x3F; + cpld_val = cpld_val & BIT_INDEX(port_bit); + status = snprintf(buf, PAGE_SIZE - 1, "%d\r\n", cpld_val>>port_bit); + + mutex_unlock(&data->update_lock); + + return status; +} + +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_sfp_data *data = i2c_get_clientdata(client); + u8 cpld_val = 0; + long reset; + int error, port_bit; + + /* Tx disable is not supported for QSFP ports(49-54) */ + if (data->port < SFP_PORT_MAX) { + return -EINVAL; + } + port_bit = data->port - SFP_PORT_MAX; + error = kstrtol(buf, 10, &reset); + if (error) { + return error; + } + mutex_lock(&data->update_lock); + + cpld_val = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, CPLD3_OFFSET_QSFP_MOD_RST); + /* Update lp_mode status */ + if (reset) + { + cpld_val |= BIT_INDEX(port_bit); + } + else + { + cpld_val &=~BIT_INDEX(port_bit); + } + as5712_54x_i2c_cpld_write(I2C_ADDR_CPLD3, CPLD3_OFFSET_QSFP_MOD_RST, cpld_val); + + mutex_unlock(&data->update_lock); + + return count; +} + + +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_sfp_data *data = i2c_get_clientdata(client); + unsigned short cpld_addr = 0; + u8 cpld_reg = 0, cpld_val = 0, cpld_bit = 0; + long disable; + int error; + + /* Tx disable is not supported for QSFP ports(49-54) */ + if (data->port >= SFP_PORT_MAX) { + return -EINVAL; + } + + error = kstrtol(buf, 10, &disable); + if (error) { + return error; + } + + mutex_lock(&data->update_lock); + + if(data->port < 24) { + cpld_addr = I2C_ADDR_CPLD2; + cpld_reg = 0xC + data->port / 8; + cpld_bit = 1 << (data->port % 8); + } + else { + cpld_addr = I2C_ADDR_CPLD3; + cpld_reg = 0xC + (data->port - 24) / 8; + cpld_bit = 1 << (data->port % 8); + } + + cpld_val = as5712_54x_i2c_cpld_read(cpld_addr, cpld_reg); + + /* Update tx_disable status */ + if (disable) { + data->status[SFP_TX_DISABLE] |= BIT_INDEX(data->port); + cpld_val |= cpld_bit; + } + else { + data->status[SFP_TX_DISABLE] &= ~BIT_INDEX(data->port); + cpld_val &= ~cpld_bit; + } + + as5712_54x_i2c_cpld_write(cpld_addr, cpld_reg, cpld_val); + + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_eeprom(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as5712_54x_sfp_data *data = as5712_54x_sfp_update_device(dev, 1); + + if (!data->valid) { + return 0; + } + + if ((data->status[SFP_IS_PRESENT] & BIT_INDEX(data->port)) != 0) { + return 0; + } + + memcpy(buf, data->eeprom, sizeof(data->eeprom)); + + return sizeof(data->eeprom); +} + +static const struct attribute_group as5712_54x_sfp_group = { + .attrs = as5712_54x_sfp_attributes, +}; + +static int as5712_54x_sfp_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as5712_54x_sfp_data *data; + int status; + + extern int platform_accton_as5712_54x(void); + if(!platform_accton_as5712_54x()) { + return -ENODEV; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as5712_54x_sfp_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + mutex_init(&data->update_lock); + data->port = dev_id->driver_data; + i2c_set_clientdata(client, data); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as5712_54x_sfp_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: sfp '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as5712_54x_sfp_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as5712_54x_sfp_remove(struct i2c_client *client) +{ + struct as5712_54x_sfp_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as5712_54x_sfp_group); + kfree(data); + + return 0; +} + +enum port_numbers { +as5712_54x_sfp1, as5712_54x_sfp2, as5712_54x_sfp3, as5712_54x_sfp4, +as5712_54x_sfp5, as5712_54x_sfp6, as5712_54x_sfp7, as5712_54x_sfp8, +as5712_54x_sfp9, as5712_54x_sfp10, as5712_54x_sfp11,as5712_54x_sfp12, +as5712_54x_sfp13, as5712_54x_sfp14, as5712_54x_sfp15,as5712_54x_sfp16, +as5712_54x_sfp17, as5712_54x_sfp18, as5712_54x_sfp19,as5712_54x_sfp20, +as5712_54x_sfp21, as5712_54x_sfp22, as5712_54x_sfp23,as5712_54x_sfp24, +as5712_54x_sfp25, as5712_54x_sfp26, as5712_54x_sfp27,as5712_54x_sfp28, +as5712_54x_sfp29, as5712_54x_sfp30, as5712_54x_sfp31,as5712_54x_sfp32, +as5712_54x_sfp33, as5712_54x_sfp34, as5712_54x_sfp35,as5712_54x_sfp36, +as5712_54x_sfp37, as5712_54x_sfp38, as5712_54x_sfp39,as5712_54x_sfp40, +as5712_54x_sfp41, as5712_54x_sfp42, as5712_54x_sfp43,as5712_54x_sfp44, +as5712_54x_sfp45, as5712_54x_sfp46, as5712_54x_sfp47,as5712_54x_sfp48, +as5712_54x_sfp49, as5712_54x_sfp52, as5712_54x_sfp50,as5712_54x_sfp53, +as5712_54x_sfp51, as5712_54x_sfp54 +}; + +static const struct i2c_device_id as5712_54x_sfp_id[] = { +{ "as5712_54x_sfp1", as5712_54x_sfp1 }, { "as5712_54x_sfp2", as5712_54x_sfp2 }, +{ "as5712_54x_sfp3", as5712_54x_sfp3 }, { "as5712_54x_sfp4", as5712_54x_sfp4 }, +{ "as5712_54x_sfp5", as5712_54x_sfp5 }, { "as5712_54x_sfp6", as5712_54x_sfp6 }, +{ "as5712_54x_sfp7", as5712_54x_sfp7 }, { "as5712_54x_sfp8", as5712_54x_sfp8 }, +{ "as5712_54x_sfp9", as5712_54x_sfp9 }, { "as5712_54x_sfp10", as5712_54x_sfp10 }, +{ "as5712_54x_sfp11", as5712_54x_sfp11 }, { "as5712_54x_sfp12", as5712_54x_sfp12 }, +{ "as5712_54x_sfp13", as5712_54x_sfp13 }, { "as5712_54x_sfp14", as5712_54x_sfp14 }, +{ "as5712_54x_sfp15", as5712_54x_sfp15 }, { "as5712_54x_sfp16", as5712_54x_sfp16 }, +{ "as5712_54x_sfp17", as5712_54x_sfp17 }, { "as5712_54x_sfp18", as5712_54x_sfp18 }, +{ "as5712_54x_sfp19", as5712_54x_sfp19 }, { "as5712_54x_sfp20", as5712_54x_sfp20 }, +{ "as5712_54x_sfp21", as5712_54x_sfp21 }, { "as5712_54x_sfp22", as5712_54x_sfp22 }, +{ "as5712_54x_sfp23", as5712_54x_sfp23 }, { "as5712_54x_sfp24", as5712_54x_sfp24 }, +{ "as5712_54x_sfp25", as5712_54x_sfp25 }, { "as5712_54x_sfp26", as5712_54x_sfp26 }, +{ "as5712_54x_sfp27", as5712_54x_sfp27 }, { "as5712_54x_sfp28", as5712_54x_sfp28 }, +{ "as5712_54x_sfp29", as5712_54x_sfp29 }, { "as5712_54x_sfp30", as5712_54x_sfp30 }, +{ "as5712_54x_sfp31", as5712_54x_sfp31 }, { "as5712_54x_sfp32", as5712_54x_sfp32 }, +{ "as5712_54x_sfp33", as5712_54x_sfp33 }, { "as5712_54x_sfp34", as5712_54x_sfp34 }, +{ "as5712_54x_sfp35", as5712_54x_sfp35 }, { "as5712_54x_sfp36", as5712_54x_sfp36 }, +{ "as5712_54x_sfp37", as5712_54x_sfp37 }, { "as5712_54x_sfp38", as5712_54x_sfp38 }, +{ "as5712_54x_sfp39", as5712_54x_sfp39 }, { "as5712_54x_sfp40", as5712_54x_sfp40 }, +{ "as5712_54x_sfp41", as5712_54x_sfp41 }, { "as5712_54x_sfp42", as5712_54x_sfp42 }, +{ "as5712_54x_sfp43", as5712_54x_sfp43 }, { "as5712_54x_sfp44", as5712_54x_sfp44 }, +{ "as5712_54x_sfp45", as5712_54x_sfp45 }, { "as5712_54x_sfp46", as5712_54x_sfp46 }, +{ "as5712_54x_sfp47", as5712_54x_sfp47 }, { "as5712_54x_sfp48", as5712_54x_sfp48 }, +{ "as5712_54x_sfp49", as5712_54x_sfp49 }, { "as5712_54x_sfp50", as5712_54x_sfp50 }, +{ "as5712_54x_sfp51", as5712_54x_sfp51 }, { "as5712_54x_sfp52", as5712_54x_sfp52 }, +{ "as5712_54x_sfp53", as5712_54x_sfp53 }, { "as5712_54x_sfp54", as5712_54x_sfp54 }, + +{} +}; +MODULE_DEVICE_TABLE(i2c, as5712_54x_sfp_id); + +static struct i2c_driver as5712_54x_sfp_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as5712_54x_sfp", + }, + .probe = as5712_54x_sfp_probe, + .remove = as5712_54x_sfp_remove, + .id_table = as5712_54x_sfp_id, + .address_list = normal_i2c, +}; + +static int as5712_54x_sfp_read_byte(struct i2c_client *client, u8 command, u8 *data) +{ + int result = i2c_smbus_read_byte_data(client, command); + + if (unlikely(result < 0)) { + dev_dbg(&client->dev, "sfp read byte data failed, command(0x%2x), data(0x%2x)\r\n", command, result); + goto abort; + } + + *data = (u8)result; + result = 0; + +abort: + return result; +} + +#define ALWAYS_UPDATE_DEVICE 1 + +static struct as5712_54x_sfp_data *as5712_54x_sfp_update_device(struct device *dev, int update_eeprom) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_sfp_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (ALWAYS_UPDATE_DEVICE || time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status = -1; + int i = 0, j = 0; + + data->valid = 0; + //dev_dbg(&client->dev, "Starting as5712_54x sfp status update\n"); + memset(data->status, 0, sizeof(data->status)); + + /* Read status of port 1~48(SFP port) */ + for (i = 0; i < 2; i++) { + for (j = 0; j < 12; j++) { + status = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD2+i, 0x6+j); + + if (status < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", I2C_ADDR_CPLD2+i, 0x6+j, status); + goto exit; + } + + data->status[j/3] |= (u64)status << ((i*24) + (j%3)*8); + } + } + + /* + * Bring QSFPs out of reset, + * This is a temporary fix until the QSFP+_MOD_RST register + * can be exposed through the driver. + */ + as5712_54x_i2c_cpld_write(I2C_ADDR_CPLD3, 0x15, 0x3F); + + /* Read present status of port 49-54(QSFP port) */ + status = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x14); + + if (status < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", I2C_ADDR_CPLD2+i, 0x6+j, status); + } + else { + data->status[SFP_IS_PRESENT] |= (u64)status << 48; + } + + if (update_eeprom) { + /* Read eeprom data based on port number */ + memset(data->eeprom, 0, sizeof(data->eeprom)); + + /* Check if the port is present */ + if ((data->status[SFP_IS_PRESENT] & BIT_INDEX(data->port)) == 0) { + /* read eeprom */ + for (i = 0; i < sizeof(data->eeprom); i++) { + status = as5712_54x_sfp_read_byte(client, i, data->eeprom + i); + + if (status < 0) { + dev_dbg(&client->dev, "unable to read eeprom from port(%d)\n", + CPLD_PORT_TO_FRONT_PORT(data->port)); + goto exit; + } + } + } + } + + data->valid = 1; + data->last_updated = jiffies; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +module_i2c_driver(as5712_54x_sfp_driver); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton as5712_54x_sfp driver"); +MODULE_LICENSE("GPL"); + +#if 0 + int i = 0, j = 0; + + data->valid = 0; + //dev_dbg(&client->dev, "Starting as5712_54x sfp update\n"); + memset(data->status, 0, sizeof(data->status)); + + /* Read status of port 1~48(SFP port) */ + for (i = 0; i < 2; i++) { + for (j = 0; j < 12; j++) { + status = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD2+i, 0x6+j); + + if (status < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", I2C_ADDR_CPLD2+i, 0x6+j, status); + continue; + } + + data->status[j/3] |= (u64)status << ((i*24) + (j%3)*8); + } + } + + /* Read present status of port 49-54(QSFP port) */ + status = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x14); + + if (status < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", I2C_ADDR_CPLD2+i, 0x6+j, status); + } + else { + data->status[SFP_IS_PRESENT] |= (u64)status << 48; + } +#endif + +/* Reserver to prevent from CPLD port mapping is changed + */ +#if 0 +BIT_INDEX(port_present_index[data->port]) +/* The bit index of is_present field read from CPLD + * Array index 0 is for as5712_54x_sfp1, + * index 1 is for as5712_54x_sfp2, and so on. + */ +static const int port_present_index[] = { + 4, 5, 6, 7, 9, 8, 11, 10, + 0, 1, 2, 3, 12, 13, 14, 15, +16, 17, 18, 19, 28, 29, 30, 31, +20, 21, 22, 23, 24, 25, 26, 27 +}; +#endif + +#if 0 +static struct as5712_54x_sfp_data *as5712_54x_sfp_update_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_sfp_data *data = i2c_get_clientdata(client); + int status = -1; + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->status_last_updated + HZ + HZ / 2) + || !data->status_valid) { + int status = -1; + int i = 0, j = 0; + + data->status_valid = 0; + //dev_dbg(&client->dev, "Starting as5712_54x sfp status update\n"); + memset(data->status, 0, sizeof(data->status)); + + /* Read status of port 1~48(SFP port) */ + for (i = 0; i < 2; i++) { + for (j = 0; j < 12; j++) { + status = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD2+i, 0x6+j); + + if (status < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", I2C_ADDR_CPLD2+i, 0x6+j, status); + goto exit; + } + + data->status[j/3] |= (u64)status << ((i*24) + (j%3)*8); + } + } + + /* + * Bring QSFPs out of reset, + * This is a temporary fix until the QSFP+_MOD_RST register + * can be exposed through the driver. + */ + as5712_54x_i2c_cpld_write(I2C_ADDR_CPLD3, 0x15, 0x3F); + + /* Read present status of port 49-54(QSFP port) */ + status = as5712_54x_i2c_cpld_read(I2C_ADDR_CPLD3, 0x14); + + if (status < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", I2C_ADDR_CPLD2+i, 0x6+j, status); + } + else { + data->status[SFP_IS_PRESENT] |= (u64)status << 48; + } + + data->status_valid = 1; + data->status_last_updated = jiffies; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static struct as5712_54x_sfp_data *as5712_54x_sfp_update_eeprom(struct device *dev) +{ + struct as5712_54x_sfp_data *data = NULL; + + data = as5712_54x_sfp_update_status(dev); + + if (data == NULL || data->status_valid == 0) { + data->eeprom_valid = 0; + return data; + } + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->eeprom_last_updated + HZ + HZ / 2) + || !data->eeprom_valid) { + int status = -1; + int i = 0; + + /* Read eeprom data based on port number */ + memset(data->eeprom, 0, sizeof(data->eeprom)); + + /* Check if the port is present */ + if ((data->status[SFP_IS_PRESENT] & BIT_INDEX(data->port)) == 0) { + /* read eeprom */ + for (i = 0; i < sizeof(data->eeprom)/I2C_SMBUS_BLOCK_MAX; i++) { + status = as5712_54x_sfp_read_block(client, i*I2C_SMBUS_BLOCK_MAX, + data->eeprom+(i*I2C_SMBUS_BLOCK_MAX), + I2C_SMBUS_BLOCK_MAX); + if (status < 0) { + dev_dbg(&client->dev, "unable to read eeprom from port(%d)\n", + CPLD_PORT_TO_FRONT_PORT(data->port)); + goto exit; + } + } + } + + data->eeprom_last_updated = jiffies; + data->eeprom_valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} +#endif diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/cpr_4011_4mxx.c b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/cpr_4011_4mxx.c new file mode 100755 index 000000000000..30bea914d589 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/cpr_4011_4mxx.c @@ -0,0 +1,400 @@ +/* + * An hwmon driver for the CPR-4011-4Mxx Redundant Power Module + * + * Copyright (C) Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_FAN_DUTY_CYCLE 100 + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x3c, 0x3d, 0x3e, 0x3f, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct cpr_4011_4mxx_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 vout_mode; /* Register value */ + u16 v_in; /* Register value */ + u16 v_out; /* Register value */ + u16 i_in; /* Register value */ + u16 i_out; /* Register value */ + u16 p_in; /* Register value */ + u16 p_out; /* Register value */ + u16 temp_input[2]; /* Register value */ + u8 fan_fault; /* Register value */ + u16 fan_duty_cycle[2]; /* Register value */ + u16 fan_speed[2]; /* Register value */ +}; + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_vout(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, const char *buf, size_t count); +static int cpr_4011_4mxx_write_word(struct i2c_client *client, u8 reg, u16 value); +static struct cpr_4011_4mxx_data *cpr_4011_4mxx_update_device(struct device *dev); + +enum cpr_4011_4mxx_sysfs_attributes { + PSU_V_IN, + PSU_V_OUT, + PSU_I_IN, + PSU_I_OUT, + PSU_P_IN, + PSU_P_OUT, + PSU_TEMP1_INPUT, + PSU_FAN1_FAULT, + PSU_FAN1_DUTY_CYCLE, + PSU_FAN1_SPEED, +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_v_in, S_IRUGO, show_linear, NULL, PSU_V_IN); +static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, show_vout, NULL, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(psu_i_in, S_IRUGO, show_linear, NULL, PSU_I_IN); +static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, show_linear, NULL, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(psu_p_in, S_IRUGO, show_linear, NULL, PSU_P_IN); +static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, show_linear, NULL, PSU_P_OUT); +static SENSOR_DEVICE_ATTR(psu_temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IRUGO, show_fan_fault, NULL, PSU_FAN1_FAULT); +static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, show_linear, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE); +static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); + +static struct attribute *cpr_4011_4mxx_attributes[] = { + &sensor_dev_attr_psu_v_in.dev_attr.attr, + &sensor_dev_attr_psu_v_out.dev_attr.attr, + &sensor_dev_attr_psu_i_in.dev_attr.attr, + &sensor_dev_attr_psu_i_out.dev_attr.attr, + &sensor_dev_attr_psu_p_in.dev_attr.attr, + &sensor_dev_attr_psu_p_out.dev_attr.attr, + &sensor_dev_attr_psu_temp1_input.dev_attr.attr, + &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, + &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, + &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, + NULL +}; + +static int two_complement_to_int(u16 data, u8 valid_bit, int mask) +{ + u16 valid_data = data & mask; + bool is_negative = valid_data >> (valid_bit - 1); + + return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data; +} + +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpr_4011_4mxx_data *data = i2c_get_clientdata(client); + int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1; + long speed; + int error; + + error = kstrtol(buf, 10, &speed); + if (error) + return error; + + if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->fan_duty_cycle[nr] = speed; + cpr_4011_4mxx_write_word(client, 0x3B + nr, data->fan_duty_cycle[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct cpr_4011_4mxx_data *data = cpr_4011_4mxx_update_device(dev); + + u16 value = 0; + int exponent, mantissa; + int multiplier = 1000; + + switch (attr->index) { + case PSU_V_IN: + value = data->v_in; + break; + case PSU_I_IN: + value = data->i_in; + break; + case PSU_I_OUT: + value = data->i_out; + break; + case PSU_P_IN: + value = data->p_in; + break; + case PSU_P_OUT: + value = data->p_out; + break; + case PSU_TEMP1_INPUT: + value = data->temp_input[0]; + break; + case PSU_FAN1_DUTY_CYCLE: + multiplier = 1; + value = data->fan_duty_cycle[0]; + break; + case PSU_FAN1_SPEED: + multiplier = 1; + value = data->fan_speed[0]; + break; + default: + break; + } + + exponent = two_complement_to_int(value >> 11, 5, 0x1f); + mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff); + + return (exponent >= 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct cpr_4011_4mxx_data *data = cpr_4011_4mxx_update_device(dev); + + u8 shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6; + + return sprintf(buf, "%d\n", data->fan_fault >> shift); +} + +static ssize_t show_vout(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct cpr_4011_4mxx_data *data = cpr_4011_4mxx_update_device(dev); + int exponent, mantissa; + int multiplier = 1000; + + exponent = two_complement_to_int(data->vout_mode, 5, 0x1f); + mantissa = data->v_out; + + return (exponent > 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static const struct attribute_group cpr_4011_4mxx_group = { + .attrs = cpr_4011_4mxx_attributes, +}; + +static int cpr_4011_4mxx_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct cpr_4011_4mxx_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct cpr_4011_4mxx_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &cpr_4011_4mxx_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &cpr_4011_4mxx_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int cpr_4011_4mxx_remove(struct i2c_client *client) +{ + struct cpr_4011_4mxx_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &cpr_4011_4mxx_group); + kfree(data); + + return 0; +} + +static const struct i2c_device_id cpr_4011_4mxx_id[] = { + { "cpr_4011_4mxx", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cpr_4011_4mxx_id); + +static struct i2c_driver cpr_4011_4mxx_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "cpr_4011_4mxx", + }, + .probe = cpr_4011_4mxx_probe, + .remove = cpr_4011_4mxx_remove, + .id_table = cpr_4011_4mxx_id, + .address_list = normal_i2c, +}; + +static int cpr_4011_4mxx_read_byte(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int cpr_4011_4mxx_read_word(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_data(client, reg); +} + +static int cpr_4011_4mxx_write_word(struct i2c_client *client, u8 reg, u16 value) +{ + return i2c_smbus_write_word_data(client, reg, value); +} + +struct reg_data_byte { + u8 reg; + u8 *value; +}; + +struct reg_data_word { + u8 reg; + u16 *value; +}; + +static struct cpr_4011_4mxx_data *cpr_4011_4mxx_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpr_4011_4mxx_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i, status; + struct reg_data_byte regs_byte[] = { {0x20, &data->vout_mode}, + {0x81, &data->fan_fault}}; + struct reg_data_word regs_word[] = { {0x88, &data->v_in}, + {0x8b, &data->v_out}, + {0x89, &data->i_in}, + {0x8c, &data->i_out}, + {0x96, &data->p_out}, + {0x97, &data->p_in}, + {0x8d, &(data->temp_input[0])}, + {0x8e, &(data->temp_input[1])}, + {0x3b, &(data->fan_duty_cycle[0])}, + {0x3c, &(data->fan_duty_cycle[1])}, + {0x90, &(data->fan_speed[0])}, + {0x91, &(data->fan_speed[1])}}; + + dev_dbg(&client->dev, "Starting cpr_4011_4mxx update\n"); + + /* Read byte data */ + for (i = 0; i < ARRAY_SIZE(regs_byte); i++) { + status = cpr_4011_4mxx_read_byte(client, regs_byte[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_byte[i].reg, status); + } + else { + *(regs_byte[i].value) = status; + } + } + + /* Read word data */ + for (i = 0; i < ARRAY_SIZE(regs_word); i++) { + status = cpr_4011_4mxx_read_word(client, regs_word[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_word[i].reg, status); + } + else { + *(regs_word[i].value) = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init cpr_4011_4mxx_init(void) +{ + return i2c_add_driver(&cpr_4011_4mxx_driver); +} + +static void __exit cpr_4011_4mxx_exit(void) +{ + i2c_del_driver(&cpr_4011_4mxx_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("CPR_4011_4MXX driver"); +MODULE_LICENSE("GPL"); + +module_init(cpr_4011_4mxx_init); +module_exit(cpr_4011_4mxx_exit); diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/i2c-mux-accton_as5712_54x_cpld.c b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/i2c-mux-accton_as5712_54x_cpld.c new file mode 100755 index 000000000000..d63cb14b5a67 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/i2c-mux-accton_as5712_54x_cpld.c @@ -0,0 +1,1517 @@ +/* + * I2C multiplexer + * + * Copyright (C) Brandon Chuang + * + * This module supports the accton cpld that hold the channel select + * mechanism for other i2c slave devices, such as SFP. + * This includes the: + * Accton as5712_54x CPLD1/CPLD2/CPLD3 + * + * Based on: + * pca954x.c from Kumar Gala + * Copyright (C) 2006 + * + * Based on: + * pca954x.c from Ken Harrenstien + * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) + * + * Based on: + * i2c-virtual_cb.c from Brian Kuschak + * and + * pca9540.c from Jean Delvare . + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ + +#define NUM_OF_CPLD1_CHANS 0x0 +#define NUM_OF_CPLD2_CHANS 0x18 +#define NUM_OF_CPLD3_CHANS 0x1E +#define CPLD_CHANNEL_SELECT_REG 0x2 +#define CPLD_DESELECT_CHANNEL 0xFF + +#if 0 +#define NUM_OF_ALL_CPLD_CHANS (NUM_OF_CPLD2_CHANS + NUM_OF_CPLD3_CHANS) +#endif + +#define ACCTON_I2C_CPLD_MUX_MAX_NCHANS NUM_OF_CPLD3_CHANS + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +enum cpld_mux_type { + as5712_54x_cpld2, + as5712_54x_cpld3, + as5712_54x_cpld1 +}; + +struct as5712_54x_cpld_data { + enum cpld_mux_type type; + struct i2c_adapter *virt_adaps[ACCTON_I2C_CPLD_MUX_MAX_NCHANS]; + u8 last_chan; /* last register value */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) + struct i2c_client *client; + struct i2c_mux_core *muxc; +#endif + struct device *hwmon_dev; + struct mutex update_lock; +}; + +#if 0 +/* The mapping table between mux index and adapter index + array index : the mux index + the content : adapter index + */ +static int mux_adap_map[NUM_OF_ALL_CPLD_CHANS]; +#endif + +struct chip_desc { + u8 nchans; + u8 deselectChan; +}; + +/* Provide specs for the PCA954x types we know about */ +static const struct chip_desc chips[] = { + [as5712_54x_cpld1] = { + .nchans = NUM_OF_CPLD1_CHANS, + .deselectChan = CPLD_DESELECT_CHANNEL, + }, + [as5712_54x_cpld2] = { + .nchans = NUM_OF_CPLD2_CHANS, + .deselectChan = CPLD_DESELECT_CHANNEL, + }, + [as5712_54x_cpld3] = { + .nchans = NUM_OF_CPLD3_CHANS, + .deselectChan = CPLD_DESELECT_CHANNEL, + } +}; + +static const struct i2c_device_id as5712_54x_cpld_mux_id[] = { + { "as5712_54x_cpld1", as5712_54x_cpld1 }, + { "as5712_54x_cpld2", as5712_54x_cpld2 }, + { "as5712_54x_cpld3", as5712_54x_cpld3 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, as5712_54x_cpld_mux_id); + +#define TRANSCEIVER_PRESENT_ATTR_ID(index) MODULE_PRESENT_##index +#define TRANSCEIVER_TXDISABLE_ATTR_ID(index) MODULE_TXDISABLE_##index +#define TRANSCEIVER_RXLOS_ATTR_ID(index) MODULE_RXLOS_##index +#define TRANSCEIVER_TXFAULT_ATTR_ID(index) MODULE_TXFAULT_##index +#define TRANSCEIVER_LPMODE_ATTR_ID(index) MODULE_LPMODE_##index +#define TRANSCEIVER_RESET_ATTR_ID(index) MODULE_RESET_##index + +enum as5712_54x_cpld1_sysfs_attributes { + CPLD_VERSION, + ACCESS, + MODULE_PRESENT_ALL, + MODULE_RXLOS_ALL, + /* transceiver attributes */ + TRANSCEIVER_PRESENT_ATTR_ID(1), + TRANSCEIVER_PRESENT_ATTR_ID(2), + TRANSCEIVER_PRESENT_ATTR_ID(3), + TRANSCEIVER_PRESENT_ATTR_ID(4), + TRANSCEIVER_PRESENT_ATTR_ID(5), + TRANSCEIVER_PRESENT_ATTR_ID(6), + TRANSCEIVER_PRESENT_ATTR_ID(7), + TRANSCEIVER_PRESENT_ATTR_ID(8), + TRANSCEIVER_PRESENT_ATTR_ID(9), + TRANSCEIVER_PRESENT_ATTR_ID(10), + TRANSCEIVER_PRESENT_ATTR_ID(11), + TRANSCEIVER_PRESENT_ATTR_ID(12), + TRANSCEIVER_PRESENT_ATTR_ID(13), + TRANSCEIVER_PRESENT_ATTR_ID(14), + TRANSCEIVER_PRESENT_ATTR_ID(15), + TRANSCEIVER_PRESENT_ATTR_ID(16), + TRANSCEIVER_PRESENT_ATTR_ID(17), + TRANSCEIVER_PRESENT_ATTR_ID(18), + TRANSCEIVER_PRESENT_ATTR_ID(19), + TRANSCEIVER_PRESENT_ATTR_ID(20), + TRANSCEIVER_PRESENT_ATTR_ID(21), + TRANSCEIVER_PRESENT_ATTR_ID(22), + TRANSCEIVER_PRESENT_ATTR_ID(23), + TRANSCEIVER_PRESENT_ATTR_ID(24), + TRANSCEIVER_PRESENT_ATTR_ID(25), + TRANSCEIVER_PRESENT_ATTR_ID(26), + TRANSCEIVER_PRESENT_ATTR_ID(27), + TRANSCEIVER_PRESENT_ATTR_ID(28), + TRANSCEIVER_PRESENT_ATTR_ID(29), + TRANSCEIVER_PRESENT_ATTR_ID(30), + TRANSCEIVER_PRESENT_ATTR_ID(31), + TRANSCEIVER_PRESENT_ATTR_ID(32), + TRANSCEIVER_PRESENT_ATTR_ID(33), + TRANSCEIVER_PRESENT_ATTR_ID(34), + TRANSCEIVER_PRESENT_ATTR_ID(35), + TRANSCEIVER_PRESENT_ATTR_ID(36), + TRANSCEIVER_PRESENT_ATTR_ID(37), + TRANSCEIVER_PRESENT_ATTR_ID(38), + TRANSCEIVER_PRESENT_ATTR_ID(39), + TRANSCEIVER_PRESENT_ATTR_ID(40), + TRANSCEIVER_PRESENT_ATTR_ID(41), + TRANSCEIVER_PRESENT_ATTR_ID(42), + TRANSCEIVER_PRESENT_ATTR_ID(43), + TRANSCEIVER_PRESENT_ATTR_ID(44), + TRANSCEIVER_PRESENT_ATTR_ID(45), + TRANSCEIVER_PRESENT_ATTR_ID(46), + TRANSCEIVER_PRESENT_ATTR_ID(47), + TRANSCEIVER_PRESENT_ATTR_ID(48), + TRANSCEIVER_PRESENT_ATTR_ID(49), + TRANSCEIVER_PRESENT_ATTR_ID(50), + TRANSCEIVER_PRESENT_ATTR_ID(51), + TRANSCEIVER_PRESENT_ATTR_ID(52), + TRANSCEIVER_PRESENT_ATTR_ID(53), + TRANSCEIVER_PRESENT_ATTR_ID(54), + TRANSCEIVER_TXDISABLE_ATTR_ID(1), + TRANSCEIVER_TXDISABLE_ATTR_ID(2), + TRANSCEIVER_TXDISABLE_ATTR_ID(3), + TRANSCEIVER_TXDISABLE_ATTR_ID(4), + TRANSCEIVER_TXDISABLE_ATTR_ID(5), + TRANSCEIVER_TXDISABLE_ATTR_ID(6), + TRANSCEIVER_TXDISABLE_ATTR_ID(7), + TRANSCEIVER_TXDISABLE_ATTR_ID(8), + TRANSCEIVER_TXDISABLE_ATTR_ID(9), + TRANSCEIVER_TXDISABLE_ATTR_ID(10), + TRANSCEIVER_TXDISABLE_ATTR_ID(11), + TRANSCEIVER_TXDISABLE_ATTR_ID(12), + TRANSCEIVER_TXDISABLE_ATTR_ID(13), + TRANSCEIVER_TXDISABLE_ATTR_ID(14), + TRANSCEIVER_TXDISABLE_ATTR_ID(15), + TRANSCEIVER_TXDISABLE_ATTR_ID(16), + TRANSCEIVER_TXDISABLE_ATTR_ID(17), + TRANSCEIVER_TXDISABLE_ATTR_ID(18), + TRANSCEIVER_TXDISABLE_ATTR_ID(19), + TRANSCEIVER_TXDISABLE_ATTR_ID(20), + TRANSCEIVER_TXDISABLE_ATTR_ID(21), + TRANSCEIVER_TXDISABLE_ATTR_ID(22), + TRANSCEIVER_TXDISABLE_ATTR_ID(23), + TRANSCEIVER_TXDISABLE_ATTR_ID(24), + TRANSCEIVER_TXDISABLE_ATTR_ID(25), + TRANSCEIVER_TXDISABLE_ATTR_ID(26), + TRANSCEIVER_TXDISABLE_ATTR_ID(27), + TRANSCEIVER_TXDISABLE_ATTR_ID(28), + TRANSCEIVER_TXDISABLE_ATTR_ID(29), + TRANSCEIVER_TXDISABLE_ATTR_ID(30), + TRANSCEIVER_TXDISABLE_ATTR_ID(31), + TRANSCEIVER_TXDISABLE_ATTR_ID(32), + TRANSCEIVER_TXDISABLE_ATTR_ID(33), + TRANSCEIVER_TXDISABLE_ATTR_ID(34), + TRANSCEIVER_TXDISABLE_ATTR_ID(35), + TRANSCEIVER_TXDISABLE_ATTR_ID(36), + TRANSCEIVER_TXDISABLE_ATTR_ID(37), + TRANSCEIVER_TXDISABLE_ATTR_ID(38), + TRANSCEIVER_TXDISABLE_ATTR_ID(39), + TRANSCEIVER_TXDISABLE_ATTR_ID(40), + TRANSCEIVER_TXDISABLE_ATTR_ID(41), + TRANSCEIVER_TXDISABLE_ATTR_ID(42), + TRANSCEIVER_TXDISABLE_ATTR_ID(43), + TRANSCEIVER_TXDISABLE_ATTR_ID(44), + TRANSCEIVER_TXDISABLE_ATTR_ID(45), + TRANSCEIVER_TXDISABLE_ATTR_ID(46), + TRANSCEIVER_TXDISABLE_ATTR_ID(47), + TRANSCEIVER_TXDISABLE_ATTR_ID(48), + TRANSCEIVER_RXLOS_ATTR_ID(1), + TRANSCEIVER_RXLOS_ATTR_ID(2), + TRANSCEIVER_RXLOS_ATTR_ID(3), + TRANSCEIVER_RXLOS_ATTR_ID(4), + TRANSCEIVER_RXLOS_ATTR_ID(5), + TRANSCEIVER_RXLOS_ATTR_ID(6), + TRANSCEIVER_RXLOS_ATTR_ID(7), + TRANSCEIVER_RXLOS_ATTR_ID(8), + TRANSCEIVER_RXLOS_ATTR_ID(9), + TRANSCEIVER_RXLOS_ATTR_ID(10), + TRANSCEIVER_RXLOS_ATTR_ID(11), + TRANSCEIVER_RXLOS_ATTR_ID(12), + TRANSCEIVER_RXLOS_ATTR_ID(13), + TRANSCEIVER_RXLOS_ATTR_ID(14), + TRANSCEIVER_RXLOS_ATTR_ID(15), + TRANSCEIVER_RXLOS_ATTR_ID(16), + TRANSCEIVER_RXLOS_ATTR_ID(17), + TRANSCEIVER_RXLOS_ATTR_ID(18), + TRANSCEIVER_RXLOS_ATTR_ID(19), + TRANSCEIVER_RXLOS_ATTR_ID(20), + TRANSCEIVER_RXLOS_ATTR_ID(21), + TRANSCEIVER_RXLOS_ATTR_ID(22), + TRANSCEIVER_RXLOS_ATTR_ID(23), + TRANSCEIVER_RXLOS_ATTR_ID(24), + TRANSCEIVER_RXLOS_ATTR_ID(25), + TRANSCEIVER_RXLOS_ATTR_ID(26), + TRANSCEIVER_RXLOS_ATTR_ID(27), + TRANSCEIVER_RXLOS_ATTR_ID(28), + TRANSCEIVER_RXLOS_ATTR_ID(29), + TRANSCEIVER_RXLOS_ATTR_ID(30), + TRANSCEIVER_RXLOS_ATTR_ID(31), + TRANSCEIVER_RXLOS_ATTR_ID(32), + TRANSCEIVER_RXLOS_ATTR_ID(33), + TRANSCEIVER_RXLOS_ATTR_ID(34), + TRANSCEIVER_RXLOS_ATTR_ID(35), + TRANSCEIVER_RXLOS_ATTR_ID(36), + TRANSCEIVER_RXLOS_ATTR_ID(37), + TRANSCEIVER_RXLOS_ATTR_ID(38), + TRANSCEIVER_RXLOS_ATTR_ID(39), + TRANSCEIVER_RXLOS_ATTR_ID(40), + TRANSCEIVER_RXLOS_ATTR_ID(41), + TRANSCEIVER_RXLOS_ATTR_ID(42), + TRANSCEIVER_RXLOS_ATTR_ID(43), + TRANSCEIVER_RXLOS_ATTR_ID(44), + TRANSCEIVER_RXLOS_ATTR_ID(45), + TRANSCEIVER_RXLOS_ATTR_ID(46), + TRANSCEIVER_RXLOS_ATTR_ID(47), + TRANSCEIVER_RXLOS_ATTR_ID(48), + TRANSCEIVER_TXFAULT_ATTR_ID(1), + TRANSCEIVER_TXFAULT_ATTR_ID(2), + TRANSCEIVER_TXFAULT_ATTR_ID(3), + TRANSCEIVER_TXFAULT_ATTR_ID(4), + TRANSCEIVER_TXFAULT_ATTR_ID(5), + TRANSCEIVER_TXFAULT_ATTR_ID(6), + TRANSCEIVER_TXFAULT_ATTR_ID(7), + TRANSCEIVER_TXFAULT_ATTR_ID(8), + TRANSCEIVER_TXFAULT_ATTR_ID(9), + TRANSCEIVER_TXFAULT_ATTR_ID(10), + TRANSCEIVER_TXFAULT_ATTR_ID(11), + TRANSCEIVER_TXFAULT_ATTR_ID(12), + TRANSCEIVER_TXFAULT_ATTR_ID(13), + TRANSCEIVER_TXFAULT_ATTR_ID(14), + TRANSCEIVER_TXFAULT_ATTR_ID(15), + TRANSCEIVER_TXFAULT_ATTR_ID(16), + TRANSCEIVER_TXFAULT_ATTR_ID(17), + TRANSCEIVER_TXFAULT_ATTR_ID(18), + TRANSCEIVER_TXFAULT_ATTR_ID(19), + TRANSCEIVER_TXFAULT_ATTR_ID(20), + TRANSCEIVER_TXFAULT_ATTR_ID(21), + TRANSCEIVER_TXFAULT_ATTR_ID(22), + TRANSCEIVER_TXFAULT_ATTR_ID(23), + TRANSCEIVER_TXFAULT_ATTR_ID(24), + TRANSCEIVER_TXFAULT_ATTR_ID(25), + TRANSCEIVER_TXFAULT_ATTR_ID(26), + TRANSCEIVER_TXFAULT_ATTR_ID(27), + TRANSCEIVER_TXFAULT_ATTR_ID(28), + TRANSCEIVER_TXFAULT_ATTR_ID(29), + TRANSCEIVER_TXFAULT_ATTR_ID(30), + TRANSCEIVER_TXFAULT_ATTR_ID(31), + TRANSCEIVER_TXFAULT_ATTR_ID(32), + TRANSCEIVER_TXFAULT_ATTR_ID(33), + TRANSCEIVER_TXFAULT_ATTR_ID(34), + TRANSCEIVER_TXFAULT_ATTR_ID(35), + TRANSCEIVER_TXFAULT_ATTR_ID(36), + TRANSCEIVER_TXFAULT_ATTR_ID(37), + TRANSCEIVER_TXFAULT_ATTR_ID(38), + TRANSCEIVER_TXFAULT_ATTR_ID(39), + TRANSCEIVER_TXFAULT_ATTR_ID(40), + TRANSCEIVER_TXFAULT_ATTR_ID(41), + TRANSCEIVER_TXFAULT_ATTR_ID(42), + TRANSCEIVER_TXFAULT_ATTR_ID(43), + TRANSCEIVER_TXFAULT_ATTR_ID(44), + TRANSCEIVER_TXFAULT_ATTR_ID(45), + TRANSCEIVER_TXFAULT_ATTR_ID(46), + TRANSCEIVER_TXFAULT_ATTR_ID(47), + TRANSCEIVER_TXFAULT_ATTR_ID(48), + TRANSCEIVER_LPMODE_ATTR_ID(49), + TRANSCEIVER_LPMODE_ATTR_ID(50), + TRANSCEIVER_LPMODE_ATTR_ID(51), + TRANSCEIVER_LPMODE_ATTR_ID(52), + TRANSCEIVER_LPMODE_ATTR_ID(53), + TRANSCEIVER_LPMODE_ATTR_ID(54), + TRANSCEIVER_RESET_ATTR_ID(49), + TRANSCEIVER_RESET_ATTR_ID(50), + TRANSCEIVER_RESET_ATTR_ID(51), + TRANSCEIVER_RESET_ATTR_ID(52), + TRANSCEIVER_RESET_ATTR_ID(53), + TRANSCEIVER_RESET_ATTR_ID(54), +}; + +/* sysfs attributes for hwmon + */ +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_rxlos_all(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t set_lp_mode(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf); +static int as5712_54x_cpld_read_internal(struct i2c_client *client, u8 reg); +static int as5712_54x_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value); + +/* transceiver attributes */ +#define DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_present_##index, S_IRUGO, show_status, NULL, MODULE_PRESENT_##index) +#define DECLARE_TRANSCEIVER_PRESENT_ATTR(index) &sensor_dev_attr_module_present_##index.dev_attr.attr + +#define DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_tx_disable_##index, S_IRUGO | S_IWUSR, show_status, set_tx_disable, MODULE_TXDISABLE_##index); \ + static SENSOR_DEVICE_ATTR(module_rx_los_##index, S_IRUGO, show_status, NULL, MODULE_RXLOS_##index); \ + static SENSOR_DEVICE_ATTR(module_tx_fault_##index, S_IRUGO, show_status, NULL, MODULE_TXFAULT_##index) + +#define DECLARE_SFP_TRANSCEIVER_ATTR(index) \ + &sensor_dev_attr_module_tx_disable_##index.dev_attr.attr, \ + &sensor_dev_attr_module_rx_los_##index.dev_attr.attr, \ + &sensor_dev_attr_module_tx_fault_##index.dev_attr.attr + +#define DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_lp_mode_##index, S_IRUGO | S_IWUSR, show_status, set_lp_mode, MODULE_LPMODE_##index); \ + static SENSOR_DEVICE_ATTR(module_reset_##index, S_IWUSR | S_IRUGO, show_status, set_mode_reset, MODULE_RESET_##index) + +#define DECLARE_QSFP_TRANSCEIVER_ATTR(index) \ + &sensor_dev_attr_module_lp_mode_##index.dev_attr.attr, \ + &sensor_dev_attr_module_reset_##index.dev_attr.attr + + +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(access, S_IWUSR, NULL, access, ACCESS); +/* transceiver attributes */ +static SENSOR_DEVICE_ATTR(module_present_all, S_IRUGO, show_present_all, NULL, MODULE_PRESENT_ALL); +static SENSOR_DEVICE_ATTR(module_rx_los_all, S_IRUGO, show_rxlos_all, NULL, MODULE_RXLOS_ALL); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(1); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(2); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(3); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(4); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(5); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(6); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(7); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(8); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(9); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(10); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(11); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(12); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(13); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(14); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(15); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(16); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(17); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(18); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(19); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(20); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(21); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(22); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(23); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(24); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(25); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(26); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(27); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(28); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(29); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(30); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(31); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(32); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(33); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(34); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(35); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(36); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(37); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(38); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(39); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(40); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(41); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(42); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(43); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(44); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(45); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(46); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(47); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(48); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(49); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(50); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(51); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(52); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(53); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(54); + +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(1); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(2); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(3); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(4); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(5); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(6); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(7); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(8); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(9); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(10); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(11); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(12); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(13); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(14); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(15); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(16); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(17); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(18); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(19); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(20); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(21); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(22); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(23); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(24); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(25); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(26); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(27); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(28); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(29); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(30); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(31); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(32); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(33); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(34); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(35); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(36); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(37); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(38); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(39); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(40); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(41); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(42); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(43); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(44); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(45); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(46); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(47); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(48); +DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(49); +DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(50); +DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(51); +DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(52); +DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(53); +DECLARE_QSFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(54); + +static struct attribute *as5712_54x_cpld1_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + NULL +}; + +static const struct attribute_group as5712_54x_cpld1_group = { + .attrs = as5712_54x_cpld1_attributes, +}; + +static struct attribute *as5712_54x_cpld2_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + /* transceiver attributes */ + &sensor_dev_attr_module_present_all.dev_attr.attr, + &sensor_dev_attr_module_rx_los_all.dev_attr.attr, + DECLARE_TRANSCEIVER_PRESENT_ATTR(1), + DECLARE_TRANSCEIVER_PRESENT_ATTR(2), + DECLARE_TRANSCEIVER_PRESENT_ATTR(3), + DECLARE_TRANSCEIVER_PRESENT_ATTR(4), + DECLARE_TRANSCEIVER_PRESENT_ATTR(5), + DECLARE_TRANSCEIVER_PRESENT_ATTR(6), + DECLARE_TRANSCEIVER_PRESENT_ATTR(7), + DECLARE_TRANSCEIVER_PRESENT_ATTR(8), + DECLARE_TRANSCEIVER_PRESENT_ATTR(9), + DECLARE_TRANSCEIVER_PRESENT_ATTR(10), + DECLARE_TRANSCEIVER_PRESENT_ATTR(11), + DECLARE_TRANSCEIVER_PRESENT_ATTR(12), + DECLARE_TRANSCEIVER_PRESENT_ATTR(13), + DECLARE_TRANSCEIVER_PRESENT_ATTR(14), + DECLARE_TRANSCEIVER_PRESENT_ATTR(15), + DECLARE_TRANSCEIVER_PRESENT_ATTR(16), + DECLARE_TRANSCEIVER_PRESENT_ATTR(17), + DECLARE_TRANSCEIVER_PRESENT_ATTR(18), + DECLARE_TRANSCEIVER_PRESENT_ATTR(19), + DECLARE_TRANSCEIVER_PRESENT_ATTR(20), + DECLARE_TRANSCEIVER_PRESENT_ATTR(21), + DECLARE_TRANSCEIVER_PRESENT_ATTR(22), + DECLARE_TRANSCEIVER_PRESENT_ATTR(23), + DECLARE_TRANSCEIVER_PRESENT_ATTR(24), + DECLARE_SFP_TRANSCEIVER_ATTR(1), + DECLARE_SFP_TRANSCEIVER_ATTR(2), + DECLARE_SFP_TRANSCEIVER_ATTR(3), + DECLARE_SFP_TRANSCEIVER_ATTR(4), + DECLARE_SFP_TRANSCEIVER_ATTR(5), + DECLARE_SFP_TRANSCEIVER_ATTR(6), + DECLARE_SFP_TRANSCEIVER_ATTR(7), + DECLARE_SFP_TRANSCEIVER_ATTR(8), + DECLARE_SFP_TRANSCEIVER_ATTR(9), + DECLARE_SFP_TRANSCEIVER_ATTR(10), + DECLARE_SFP_TRANSCEIVER_ATTR(11), + DECLARE_SFP_TRANSCEIVER_ATTR(12), + DECLARE_SFP_TRANSCEIVER_ATTR(13), + DECLARE_SFP_TRANSCEIVER_ATTR(14), + DECLARE_SFP_TRANSCEIVER_ATTR(15), + DECLARE_SFP_TRANSCEIVER_ATTR(16), + DECLARE_SFP_TRANSCEIVER_ATTR(17), + DECLARE_SFP_TRANSCEIVER_ATTR(18), + DECLARE_SFP_TRANSCEIVER_ATTR(19), + DECLARE_SFP_TRANSCEIVER_ATTR(20), + DECLARE_SFP_TRANSCEIVER_ATTR(21), + DECLARE_SFP_TRANSCEIVER_ATTR(22), + DECLARE_SFP_TRANSCEIVER_ATTR(23), + DECLARE_SFP_TRANSCEIVER_ATTR(24), + NULL +}; + +static const struct attribute_group as5712_54x_cpld2_group = { + .attrs = as5712_54x_cpld2_attributes, +}; + +static struct attribute *as5712_54x_cpld3_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + /* transceiver attributes */ + &sensor_dev_attr_module_present_all.dev_attr.attr, + &sensor_dev_attr_module_rx_los_all.dev_attr.attr, + DECLARE_TRANSCEIVER_PRESENT_ATTR(25), + DECLARE_TRANSCEIVER_PRESENT_ATTR(26), + DECLARE_TRANSCEIVER_PRESENT_ATTR(27), + DECLARE_TRANSCEIVER_PRESENT_ATTR(28), + DECLARE_TRANSCEIVER_PRESENT_ATTR(29), + DECLARE_TRANSCEIVER_PRESENT_ATTR(30), + DECLARE_TRANSCEIVER_PRESENT_ATTR(31), + DECLARE_TRANSCEIVER_PRESENT_ATTR(32), + DECLARE_TRANSCEIVER_PRESENT_ATTR(33), + DECLARE_TRANSCEIVER_PRESENT_ATTR(34), + DECLARE_TRANSCEIVER_PRESENT_ATTR(35), + DECLARE_TRANSCEIVER_PRESENT_ATTR(36), + DECLARE_TRANSCEIVER_PRESENT_ATTR(37), + DECLARE_TRANSCEIVER_PRESENT_ATTR(38), + DECLARE_TRANSCEIVER_PRESENT_ATTR(39), + DECLARE_TRANSCEIVER_PRESENT_ATTR(40), + DECLARE_TRANSCEIVER_PRESENT_ATTR(41), + DECLARE_TRANSCEIVER_PRESENT_ATTR(42), + DECLARE_TRANSCEIVER_PRESENT_ATTR(43), + DECLARE_TRANSCEIVER_PRESENT_ATTR(44), + DECLARE_TRANSCEIVER_PRESENT_ATTR(45), + DECLARE_TRANSCEIVER_PRESENT_ATTR(46), + DECLARE_TRANSCEIVER_PRESENT_ATTR(47), + DECLARE_TRANSCEIVER_PRESENT_ATTR(48), + DECLARE_TRANSCEIVER_PRESENT_ATTR(49), + DECLARE_TRANSCEIVER_PRESENT_ATTR(50), + DECLARE_TRANSCEIVER_PRESENT_ATTR(51), + DECLARE_TRANSCEIVER_PRESENT_ATTR(52), + DECLARE_TRANSCEIVER_PRESENT_ATTR(53), + DECLARE_TRANSCEIVER_PRESENT_ATTR(54), + DECLARE_SFP_TRANSCEIVER_ATTR(25), + DECLARE_SFP_TRANSCEIVER_ATTR(26), + DECLARE_SFP_TRANSCEIVER_ATTR(27), + DECLARE_SFP_TRANSCEIVER_ATTR(28), + DECLARE_SFP_TRANSCEIVER_ATTR(29), + DECLARE_SFP_TRANSCEIVER_ATTR(30), + DECLARE_SFP_TRANSCEIVER_ATTR(31), + DECLARE_SFP_TRANSCEIVER_ATTR(32), + DECLARE_SFP_TRANSCEIVER_ATTR(33), + DECLARE_SFP_TRANSCEIVER_ATTR(34), + DECLARE_SFP_TRANSCEIVER_ATTR(35), + DECLARE_SFP_TRANSCEIVER_ATTR(36), + DECLARE_SFP_TRANSCEIVER_ATTR(37), + DECLARE_SFP_TRANSCEIVER_ATTR(38), + DECLARE_SFP_TRANSCEIVER_ATTR(39), + DECLARE_SFP_TRANSCEIVER_ATTR(40), + DECLARE_SFP_TRANSCEIVER_ATTR(41), + DECLARE_SFP_TRANSCEIVER_ATTR(42), + DECLARE_SFP_TRANSCEIVER_ATTR(43), + DECLARE_SFP_TRANSCEIVER_ATTR(44), + DECLARE_SFP_TRANSCEIVER_ATTR(45), + DECLARE_SFP_TRANSCEIVER_ATTR(46), + DECLARE_SFP_TRANSCEIVER_ATTR(47), + DECLARE_SFP_TRANSCEIVER_ATTR(48), + DECLARE_QSFP_TRANSCEIVER_ATTR(49), + DECLARE_QSFP_TRANSCEIVER_ATTR(50), + DECLARE_QSFP_TRANSCEIVER_ATTR(51), + DECLARE_QSFP_TRANSCEIVER_ATTR(52), + DECLARE_QSFP_TRANSCEIVER_ATTR(53), + DECLARE_QSFP_TRANSCEIVER_ATTR(54), + NULL +}; + +static const struct attribute_group as5712_54x_cpld3_group = { + .attrs = as5712_54x_cpld3_attributes, +}; + +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf) +{ + int i, status, num_regs = 0; + u8 values[4] = {0}; + u8 regs[] = {0x6, 0x7, 0x8, 0x14}; + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + num_regs = (data->type == as5712_54x_cpld2) ? 3 : 4; + + for (i = 0; i < num_regs; i++) { + status = as5712_54x_cpld_read_internal(client, regs[i]); + + if (status < 0) { + goto exit; + } + + values[i] = ~(u8)status; + } + + mutex_unlock(&data->update_lock); + + /* Return values 1 -> 54 in order */ + if (data->type == as5712_54x_cpld2) { + status = sprintf(buf, "%.2x %.2x %.2x\n", + values[0], values[1], values[2]); + } + else { /* as5712_54x_cpld3 */ + values[3] &= 0x3F; + status = sprintf(buf, "%.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], values[3]); + } + + return status; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_rxlos_all(struct device *dev, struct device_attribute *da, + char *buf) +{ + int i, status; + u8 values[3] = {0}; + u8 regs[] = {0xF, 0x10, 0x11}; + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = as5712_54x_cpld_read_internal(client, regs[i]); + + if (status < 0) { + goto exit; + } + + values[i] = (u8)status; + } + + mutex_unlock(&data->update_lock); + + /* Return values 1 -> 24 in order */ + return sprintf(buf, "%.2x %.2x %.2x\n", values[0], values[1], values[2]); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0, revert = 0; + + switch (attr->index) { + case MODULE_PRESENT_1 ... MODULE_PRESENT_8: + reg = 0x6; + mask = 0x1 << (attr->index - MODULE_PRESENT_1); + break; + case MODULE_PRESENT_9 ... MODULE_PRESENT_16: + reg = 0x7; + mask = 0x1 << (attr->index - MODULE_PRESENT_9); + break; + case MODULE_PRESENT_17 ... MODULE_PRESENT_24: + reg = 0x8; + mask = 0x1 << (attr->index - MODULE_PRESENT_17); + break; + case MODULE_PRESENT_25 ... MODULE_PRESENT_32: + reg = 0x6; + mask = 0x1 << (attr->index - MODULE_PRESENT_25); + break; + case MODULE_PRESENT_33 ... MODULE_PRESENT_40: + reg = 0x7; + mask = 0x1 << (attr->index - MODULE_PRESENT_33); + break; + case MODULE_PRESENT_41 ... MODULE_PRESENT_48: + reg = 0x8; + mask = 0x1 << (attr->index - MODULE_PRESENT_41); + break; + case MODULE_PRESENT_49: + reg = 0x14; + mask = 0x1; + break; + case MODULE_PRESENT_50: + reg = 0x14; + mask = 0x4; + break; + case MODULE_PRESENT_51: + reg = 0x14; + mask = 0x10; + break; + case MODULE_PRESENT_52: + reg = 0x14; + mask = 0x2; + break; + case MODULE_PRESENT_53: + reg = 0x14; + mask = 0x8; + break; + case MODULE_PRESENT_54: + reg = 0x14; + mask = 0x20; + break; + case MODULE_TXFAULT_1 ... MODULE_TXFAULT_8: + reg = 0x9; + mask = 0x1 << (attr->index - MODULE_TXFAULT_1); + break; + case MODULE_TXFAULT_9 ... MODULE_TXFAULT_16: + reg = 0xA; + mask = 0x1 << (attr->index - MODULE_TXFAULT_9); + break; + case MODULE_TXFAULT_17 ... MODULE_TXFAULT_24: + reg = 0xB; + mask = 0x1 << (attr->index - MODULE_TXFAULT_17); + break; + case MODULE_TXFAULT_25 ... MODULE_TXFAULT_32: + reg = 0x9; + mask = 0x1 << (attr->index - MODULE_TXFAULT_25); + break; + case MODULE_TXFAULT_33 ... MODULE_TXFAULT_40: + reg = 0xA; + mask = 0x1 << (attr->index - MODULE_TXFAULT_33); + break; + case MODULE_TXFAULT_41 ... MODULE_TXFAULT_48: + reg = 0xB; + mask = 0x1 << (attr->index - MODULE_TXFAULT_41); + break; + case MODULE_TXDISABLE_1 ... MODULE_TXDISABLE_8: + reg = 0xC; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_1); + break; + case MODULE_TXDISABLE_9 ... MODULE_TXDISABLE_16: + reg = 0xD; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_9); + break; + case MODULE_TXDISABLE_17 ... MODULE_TXDISABLE_24: + reg = 0xE; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_17); + break; + case MODULE_TXDISABLE_25 ... MODULE_TXDISABLE_32: + reg = 0xC; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_25); + break; + case MODULE_TXDISABLE_33 ... MODULE_TXDISABLE_40: + reg = 0xD; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_33); + break; + case MODULE_TXDISABLE_41 ... MODULE_TXDISABLE_48: + reg = 0xE; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_41); + break; + case MODULE_RXLOS_1 ... MODULE_RXLOS_8: + reg = 0xF; + mask = 0x1 << (attr->index - MODULE_RXLOS_1); + break; + case MODULE_RXLOS_9 ... MODULE_RXLOS_16: + reg = 0x10; + mask = 0x1 << (attr->index - MODULE_RXLOS_9); + break; + case MODULE_RXLOS_17 ... MODULE_RXLOS_24: + reg = 0x11; + mask = 0x1 << (attr->index - MODULE_RXLOS_17); + break; + case MODULE_RXLOS_25 ... MODULE_RXLOS_32: + reg = 0xF; + mask = 0x1 << (attr->index - MODULE_RXLOS_25); + break; + case MODULE_RXLOS_33 ... MODULE_RXLOS_40: + reg = 0x10; + mask = 0x1 << (attr->index - MODULE_RXLOS_33); + break; + case MODULE_RXLOS_41 ... MODULE_RXLOS_48: + reg = 0x11; + mask = 0x1 << (attr->index - MODULE_RXLOS_41); + break; + case MODULE_LPMODE_49 ... MODULE_LPMODE_54: + reg = 0x16; + mask = 0x1 << (attr->index - MODULE_LPMODE_49); + break; + case MODULE_RESET_49 ... MODULE_RESET_54: + reg = 0x15; + mask = 0x1 << (attr->index - MODULE_RESET_49); + break; + default: + return 0; + } + + if (attr->index >= MODULE_PRESENT_1 && attr->index <= MODULE_PRESENT_54) { + revert = 1; + } + + mutex_lock(&data->update_lock); + status = as5712_54x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", revert ? !(status & mask) : !!(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); + long disable; + int status; + u8 reg = 0, mask = 0; + + status = kstrtol(buf, 10, &disable); + if (status) { + return status; + } + + switch (attr->index) { + case MODULE_TXDISABLE_1 ... MODULE_TXDISABLE_8: + reg = 0xC; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_1); + break; + case MODULE_TXDISABLE_9 ... MODULE_TXDISABLE_16: + reg = 0xD; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_9); + break; + case MODULE_TXDISABLE_17 ... MODULE_TXDISABLE_24: + reg = 0xE; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_17); + break; + case MODULE_TXDISABLE_25 ... MODULE_TXDISABLE_32: + reg = 0xC; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_25); + break; + case MODULE_TXDISABLE_33 ... MODULE_TXDISABLE_40: + reg = 0xD; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_33); + break; + case MODULE_TXDISABLE_41 ... MODULE_TXDISABLE_48: + reg = 0xE; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_41); + break; + default: + return 0; + } + + /* Read current status */ + mutex_lock(&data->update_lock); + status = as5712_54x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + + /* Update tx_disable status */ + if (disable) { + status |= mask; + } + else { + status &= ~mask; + } + + status = as5712_54x_cpld_write_internal(client, reg, status); + if (unlikely(status < 0)) { + goto exit; + } + + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t set_lp_mode(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); + long on; + int status= -ENOENT; + u8 reg = 0x16, mask = 0; + + if(attr->index < MODULE_LPMODE_49 || attr->index > MODULE_LPMODE_54) + return status; + + status = kstrtol(buf, 10, &on); + if (status) { + return status; + } + + /* Read current status */ + mutex_lock(&data->update_lock); + status = as5712_54x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + + mask = 0x1 << (attr->index - MODULE_LPMODE_49); + + /* Update lp_mode status */ + if (on) { + status |= mask; + } + else { + status &= ~mask; + } + + status = as5712_54x_cpld_write_internal(client, reg, status); + if (unlikely(status < 0)) { + goto exit; + } + + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; + +} + +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); + long on; + int status= -ENOENT; + u8 reg = 0x15, mask = 0; + + if(attr->index < MODULE_RESET_49 || attr->index > MODULE_RESET_54) + return status; + + status = kstrtol(buf, 10, &on); + if (status) { + return status; + } + + /* Read current status */ + mutex_lock(&data->update_lock); + status = as5712_54x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + + mask = 0x1 << (attr->index - MODULE_RESET_49); + + /* Update tx_disable status */ + if (on) { + status |= mask; + } + else { + status &= ~mask; + } + + status = as5712_54x_cpld_write_internal(client, reg, status); + if (unlikely(status < 0)) { + goto exit; + } + + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; + +} + +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int status; + u32 addr, val; + struct i2c_client *client = to_i2c_client(dev); + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); + + if (sscanf(buf, "0x%x 0x%x", &addr, &val) != 2) { + return -EINVAL; + } + + if (addr > 0xFF || val > 0xFF) { + return -EINVAL; + } + + mutex_lock(&data->update_lock); + status = as5712_54x_cpld_write_internal(client, addr, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer() + for this as they will try to lock adapter a second time */ +static int as5712_54x_cpld_mux_reg_write(struct i2c_adapter *adap, + struct i2c_client *client, u8 val) +{ + unsigned long orig_jiffies; + unsigned short flags; + union i2c_smbus_data data; + int try; + s32 res = -EIO; + + data.byte = val; + flags = client->flags; + flags &= I2C_M_TEN | I2C_CLIENT_PEC; + + if (adap->algo->smbus_xfer) { + /* Retry automatically on arbitration loss */ + orig_jiffies = jiffies; + for (res = 0, try = 0; try <= adap->retries; try++) { + res = adap->algo->smbus_xfer(adap, client->addr, flags, + I2C_SMBUS_WRITE, CPLD_CHANNEL_SELECT_REG, + I2C_SMBUS_BYTE_DATA, &data); + if (res != -EAGAIN) + break; + if (time_after(jiffies, + orig_jiffies + adap->timeout)) + break; + } + } + + return res; + +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) +static int as5712_54x_cpld_mux_select_chan(struct i2c_mux_core *muxc, + u32 chan) +{ + struct as5712_54x_cpld_data *data = i2c_mux_priv(muxc); + struct i2c_client *client = data->client; + u8 regval; + int ret = 0; + regval = chan; + + /* Only select the channel if its different from the last channel */ + if (data->last_chan != regval) { + ret = as5712_54x_cpld_mux_reg_write(muxc->parent, client, regval); + data->last_chan = regval; + } + + return ret; +} + +static int as5712_54x_cpld_mux_deselect_mux(struct i2c_mux_core *muxc, + u32 chan) +{ + struct as5712_54x_cpld_data *data = i2c_mux_priv(muxc); + struct i2c_client *client = data->client; + + /* Deselect active channel */ + data->last_chan = chips[data->type].deselectChan; + + return as5712_54x_cpld_mux_reg_write(muxc->parent, client, data->last_chan); +} +#else + +static int as5712_54x_cpld_mux_select_chan(struct i2c_adapter *adap, + void *client, u32 chan) +{ + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); + u8 regval; + int ret = 0; + regval = chan; + + /* Only select the channel if its different from the last channel */ + if (data->last_chan != regval) { + ret = as5712_54x_cpld_mux_reg_write(adap, client, regval); + data->last_chan = regval; + } + + return ret; +} + +static int as5712_54x_cpld_mux_deselect_mux(struct i2c_adapter *adap, + void *client, u32 chan) +{ + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); + + /* Deselect active channel */ + data->last_chan = chips[data->type].deselectChan; + + return as5712_54x_cpld_mux_reg_write(adap, client, data->last_chan); +} + +#endif /*#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0)*/ + +static void as5712_54x_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void as5712_54x_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static ssize_t show_version(struct device *dev, struct device_attribute *attr, char *buf) +{ + int val = 0; + struct i2c_client *client = to_i2c_client(dev); + + val = i2c_smbus_read_byte_data(client, 0x1); + + if (val < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x1) err %d\n", client->addr, val); +} + + return sprintf(buf, "%d", val); +} + +/* + * I2C init/probing/exit functions + */ +static int as5712_54x_cpld_mux_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); + #if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) + int force, class; + struct i2c_mux_core *muxc; +#endif + + int chan=0; + struct as5712_54x_cpld_data *data; + int ret = -ENODEV; + const struct attribute_group *group = NULL; + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) + goto exit; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) + muxc = i2c_mux_alloc(adap, &client->dev, + chips[id->driver_data].nchans, + sizeof(*data), 0, + accton_i2c_cpld_mux_select_chan, + accton_i2c_cpld_mux_deselect_mux); + if (!muxc) + return -ENOMEM; + + data = i2c_mux_priv(muxc); + i2c_set_clientdata(client, data); + data->muxc = muxc; + data->client = client; +#else + + data = kzalloc(sizeof(struct as5712_54x_cpld_data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto exit; + } + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); +#endif + data->type = id->driver_data; + if (data->type == as5712_54x_cpld2 || data->type == as5712_54x_cpld3) { + data->last_chan = chips[data->type].deselectChan; /* force the first selection */ + + /* Now create an adapter for each channel */ + for (chan = 0; chan < chips[data->type].nchans; chan++) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) + force = 0; /* dynamic adap number */ + class = 0; /* no class by default */ + ret = i2c_mux_add_adapter(muxc, force, chan, class); + if (ret) +#else + data->virt_adaps[chan] = i2c_add_mux_adapter(adap, &client->dev, client, 0, chan, + 0, + as5712_54x_cpld_mux_select_chan, + as5712_54x_cpld_mux_deselect_mux); + if (data->virt_adaps[chan] == NULL) +#endif + { + ret = -ENODEV; + dev_err(&client->dev, "failed to register multiplexed adapter %d\n", chan); + goto exit_mux_register; + } + } + + dev_info(&client->dev, "registered %d multiplexed busses for I2C mux %s\n", + chan, client->name); + } + /* Register sysfs hooks */ + switch (data->type) + { + case as5712_54x_cpld1: + group = &as5712_54x_cpld1_group; + break; + case as5712_54x_cpld2: + group = &as5712_54x_cpld2_group; + break; + case as5712_54x_cpld3: + group = &as5712_54x_cpld3_group; + break; + default: + break; + } + + + if (group) { + ret = sysfs_create_group(&client->dev.kobj, group); + if (ret) { + goto exit_mux_register; + } + } + + as5712_54x_cpld_add_client(client); + return 0; + +exit_mux_register: +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) + i2c_mux_del_adapters(muxc); +#else + for (chan--; chan >= 0; chan--) { + i2c_del_mux_adapter(data->virt_adaps[chan]); + } +#endif + kfree(data); +exit: + return ret; +} + +static int as5712_54x_cpld_mux_remove(struct i2c_client *client) +{ + struct as5712_54x_cpld_data *data = i2c_get_clientdata(client); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0) + struct i2c_mux_core *muxc = data->muxc; + + i2c_mux_del_adapters(muxc); +#else + const struct chip_desc *chip = &chips[data->type]; + int chan; + const struct attribute_group *group = NULL; + + as5712_54x_cpld_remove_client(client); + + /* Remove sysfs hooks */ + switch (data->type) { + case as5712_54x_cpld1: + group = &as5712_54x_cpld1_group; + break; + case as5712_54x_cpld2: + group = &as5712_54x_cpld2_group; + break; + case as5712_54x_cpld3: + group = &as5712_54x_cpld3_group; + break; + default: + break; + } + + if (group) { + sysfs_remove_group(&client->dev.kobj, group); + } + + for (chan = 0; chan < chip->nchans; ++chan) { + if (data->virt_adaps[chan]) { + i2c_del_mux_adapter(data->virt_adaps[chan]); + data->virt_adaps[chan] = NULL; + } + } +#endif + kfree(data); + + return 0; +} + +static int as5712_54x_cpld_read_internal(struct i2c_client *client, u8 reg) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, reg); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static int as5712_54x_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, reg, value); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +int as5712_54x_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as5712_54x_cpld_read_internal(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as5712_54x_cpld_read); + +int as5712_54x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as5712_54x_cpld_write_internal(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as5712_54x_cpld_write); + +#if 0 +int accton_i2c_cpld_mux_get_index(int adap_index) +{ + int i; + + for (i = 0; i < NUM_OF_ALL_CPLD_CHANS; i++) { + if (mux_adap_map[i] == adap_index) { + return i; + } + } + + return -EINVAL; +} +EXPORT_SYMBOL(accton_i2c_cpld_mux_get_index); +#endif + +static struct i2c_driver as5712_54x_cpld_mux_driver = { + .driver = { + .name = "as5712_54x_cpld", + .owner = THIS_MODULE, + }, + .probe = as5712_54x_cpld_mux_probe, + .remove = as5712_54x_cpld_mux_remove, + .id_table = as5712_54x_cpld_mux_id, +}; + +static int __init as5712_54x_cpld_mux_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&as5712_54x_cpld_mux_driver); +} + +static void __exit as5712_54x_cpld_mux_exit(void) +{ + i2c_del_driver(&as5712_54x_cpld_mux_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("Accton I2C CPLD mux driver"); +MODULE_LICENSE("GPL"); + +module_init(as5712_54x_cpld_mux_init); +module_exit(as5712_54x_cpld_mux_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/leds-accton_as5712_54x.c b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/leds-accton_as5712_54x.c new file mode 100755 index 000000000000..cdea927368ae --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/leds-accton_as5712_54x.c @@ -0,0 +1,594 @@ +/* + * A LED driver for the accton_as5712_54x_led + * + * Copyright (C) 2013 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include + +extern int as5712_54x_cpld_read (unsigned short cpld_addr, u8 reg); +extern int as5712_54x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +extern void led_classdev_unregister(struct led_classdev *led_cdev); +extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); +extern void led_classdev_resume(struct led_classdev *led_cdev); +extern void led_classdev_suspend(struct led_classdev *led_cdev); + +#define DRVNAME "as5712_54x_led" + +struct accton_as5712_54x_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[4]; /* Register value, 0 = LOC/DIAG/FAN LED + 1 = PSU1/PSU2 LED + 2 = FAN1-4 LED + 3 = FAN5-6 LED */ +}; + +static struct accton_as5712_54x_led_data *ledctl = NULL; + +/* LED related data + */ +#define LED_TYPE_PSU1_REG_MASK 0x03 +#define LED_MODE_PSU1_GREEN_MASK 0x02 +#define LED_MODE_PSU1_AMBER_MASK 0x01 +#define LED_MODE_PSU1_OFF_MASK 0x03 +#define LED_MODE_PSU1_AUTO_MASK 0x00 + +#define LED_TYPE_PSU2_REG_MASK 0x0C +#define LED_MODE_PSU2_GREEN_MASK 0x08 +#define LED_MODE_PSU2_AMBER_MASK 0x04 +#define LED_MODE_PSU2_OFF_MASK 0x0C +#define LED_MODE_PSU2_AUTO_MASK 0x00 + +#define LED_TYPE_DIAG_REG_MASK 0x0C +#define LED_MODE_DIAG_GREEN_MASK 0x08 +#define LED_MODE_DIAG_AMBER_MASK 0x04 +#define LED_MODE_DIAG_OFF_MASK 0x0C + +#define LED_TYPE_FAN_REG_MASK 0x03 +#define LED_MODE_FAN_GREEN_MASK 0x02 +#define LED_MODE_FAN_AMBER_MASK 0x01 +#define LED_MODE_FAN_OFF_MASK 0x03 +#define LED_MODE_FAN_AUTO_MASK 0x00 + +#define LED_TYPE_FAN1_REG_MASK 0x03 +#define LED_TYPE_FAN2_REG_MASK 0x0C +#define LED_TYPE_FAN3_REG_MASK 0x30 +#define LED_TYPE_FAN4_REG_MASK 0xC0 +#define LED_TYPE_FAN5_REG_MASK 0x03 +#define LED_TYPE_FAN6_REG_MASK 0x0C + +#define LED_MODE_FANX_GREEN_MASK 0x01 +#define LED_MODE_FANX_RED_MASK 0x02 +#define LED_MODE_FANX_OFF_MASK 0x00 + +#define LED_TYPE_LOC_REG_MASK 0x30 +#define LED_MODE_LOC_ON_MASK 0x00 +#define LED_MODE_LOC_OFF_MASK 0x10 +#define LED_MODE_LOC_BLINK_MASK 0x20 + +static const u8 led_reg[] = { + 0xA, /* LOC/DIAG/FAN LED*/ + 0xB, /* PSU1/PSU2 LED */ + 0x16, /* FAN1-4 LED */ + 0x17, /* FAN4-6 LED */ +}; + +enum led_type { + LED_TYPE_PSU1, + LED_TYPE_PSU2, + LED_TYPE_DIAG, + LED_TYPE_FAN, + LED_TYPE_FAN1, + LED_TYPE_FAN2, + LED_TYPE_FAN3, + LED_TYPE_FAN4, + LED_TYPE_FAN5, + LED_TYPE_LOC +}; + +enum led_light_mode { + LED_MODE_OFF = 0, + LED_MODE_GREEN, + LED_MODE_AMBER, + LED_MODE_RED, + LED_MODE_GREEN_BLINK, + LED_MODE_AMBER_BLINK, + LED_MODE_RED_BLINK, + LED_MODE_AUTO, +}; + +struct led_type_mode { + enum led_type type; + int type_mask; + enum led_light_mode mode; + int mode_mask; +}; + +static struct led_type_mode led_type_mode_data[] = { +{LED_TYPE_PSU1, LED_TYPE_PSU1_REG_MASK, LED_MODE_GREEN, LED_MODE_PSU1_GREEN_MASK}, +{LED_TYPE_PSU1, LED_TYPE_PSU1_REG_MASK, LED_MODE_AMBER, LED_MODE_PSU1_AMBER_MASK}, +{LED_TYPE_PSU1, LED_TYPE_PSU1_REG_MASK, LED_MODE_AUTO, LED_MODE_PSU1_AUTO_MASK}, +{LED_TYPE_PSU1, LED_TYPE_PSU1_REG_MASK, LED_MODE_OFF, LED_MODE_PSU1_OFF_MASK}, +{LED_TYPE_PSU2, LED_TYPE_PSU2_REG_MASK, LED_MODE_GREEN, LED_MODE_PSU2_GREEN_MASK}, +{LED_TYPE_PSU2, LED_TYPE_PSU2_REG_MASK, LED_MODE_AMBER, LED_MODE_PSU2_AMBER_MASK}, +{LED_TYPE_PSU2, LED_TYPE_PSU2_REG_MASK, LED_MODE_AUTO, LED_MODE_PSU2_AUTO_MASK}, +{LED_TYPE_PSU2, LED_TYPE_PSU2_REG_MASK, LED_MODE_OFF, LED_MODE_PSU2_OFF_MASK}, +{LED_TYPE_FAN, LED_TYPE_FAN_REG_MASK, LED_MODE_GREEN, LED_MODE_FAN_GREEN_MASK}, +{LED_TYPE_FAN, LED_TYPE_FAN_REG_MASK, LED_MODE_AMBER, LED_MODE_FAN_AMBER_MASK}, +{LED_TYPE_FAN, LED_TYPE_FAN_REG_MASK, LED_MODE_AUTO, LED_MODE_FAN_AUTO_MASK}, +{LED_TYPE_FAN, LED_TYPE_FAN_REG_MASK, LED_MODE_OFF, LED_MODE_FAN_OFF_MASK}, +{LED_TYPE_FAN1, LED_TYPE_FAN1_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 0}, +{LED_TYPE_FAN1, LED_TYPE_FAN1_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 0}, +{LED_TYPE_FAN1, LED_TYPE_FAN1_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 0}, +{LED_TYPE_FAN2, LED_TYPE_FAN2_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 2}, +{LED_TYPE_FAN2, LED_TYPE_FAN2_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 2}, +{LED_TYPE_FAN2, LED_TYPE_FAN2_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 2}, +{LED_TYPE_FAN3, LED_TYPE_FAN3_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 4}, +{LED_TYPE_FAN3, LED_TYPE_FAN3_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 4}, +{LED_TYPE_FAN3, LED_TYPE_FAN3_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 4}, +{LED_TYPE_FAN4, LED_TYPE_FAN4_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 6}, +{LED_TYPE_FAN4, LED_TYPE_FAN4_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 6}, +{LED_TYPE_FAN4, LED_TYPE_FAN4_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 6}, +{LED_TYPE_FAN5, LED_TYPE_FAN5_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 0}, +{LED_TYPE_FAN5, LED_TYPE_FAN5_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 0}, +{LED_TYPE_FAN5, LED_TYPE_FAN5_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 0}, +{LED_TYPE_DIAG, LED_TYPE_DIAG_REG_MASK, LED_MODE_GREEN, LED_MODE_DIAG_GREEN_MASK}, +{LED_TYPE_DIAG, LED_TYPE_DIAG_REG_MASK, LED_MODE_AMBER, LED_MODE_DIAG_AMBER_MASK}, +{LED_TYPE_DIAG, LED_TYPE_DIAG_REG_MASK, LED_MODE_OFF, LED_MODE_DIAG_OFF_MASK}, +{LED_TYPE_LOC, LED_TYPE_LOC_REG_MASK, LED_MODE_AMBER, LED_MODE_LOC_ON_MASK}, +{LED_TYPE_LOC, LED_TYPE_LOC_REG_MASK, LED_MODE_OFF, LED_MODE_LOC_OFF_MASK}, +{LED_TYPE_LOC, LED_TYPE_LOC_REG_MASK, LED_MODE_AMBER_BLINK, LED_MODE_LOC_BLINK_MASK} +}; + + +struct fanx_info_s { + u8 cname; /* device name */ + enum led_type type; + u8 reg_id; /* map to led_reg & reg_val */ +}; + +static struct fanx_info_s fanx_info[] = { + {'1', LED_TYPE_FAN1, 2}, + {'2', LED_TYPE_FAN2, 2}, + {'3', LED_TYPE_FAN3, 2}, + {'4', LED_TYPE_FAN4, 2}, + {'5', LED_TYPE_FAN5, 3} +}; + +static int led_reg_val_to_light_mode(enum led_type type, u8 reg_val) { + int i; + + for (i = 0; i < ARRAY_SIZE(led_type_mode_data); i++) { + + if (type != led_type_mode_data[i].type) + continue; + + if ((led_type_mode_data[i].type_mask & reg_val) == + led_type_mode_data[i].mode_mask) + { + return led_type_mode_data[i].mode; + } + } + + return 0; +} + +static u8 led_light_mode_to_reg_val(enum led_type type, + enum led_light_mode mode, u8 reg_val) { + int i; + + for (i = 0; i < ARRAY_SIZE(led_type_mode_data); i++) { + if (type != led_type_mode_data[i].type) + continue; + + if (mode != led_type_mode_data[i].mode) + continue; + + reg_val = led_type_mode_data[i].mode_mask | + (reg_val & (~led_type_mode_data[i].type_mask)); + } + + return reg_val; +} + +static int accton_as5712_54x_led_read_value(u8 reg) +{ + return as5712_54x_cpld_read(0x60, reg); +} + +static int accton_as5712_54x_led_write_value(u8 reg, u8 value) +{ + return as5712_54x_cpld_write(0x60, reg, value); +} + +static void accton_as5712_54x_led_update(void) +{ + mutex_lock(&ledctl->update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting accton_as5712_54x_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = accton_as5712_54x_led_read_value(led_reg[i]); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg[i], status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void accton_as5712_54x_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + u8 reg, enum led_type type) +{ + int reg_val; + + mutex_lock(&ledctl->update_lock); + + reg_val = accton_as5712_54x_led_read_value(reg); + + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + accton_as5712_54x_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void accton_as5712_54x_led_psu_1_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5712_54x_led_set(led_cdev, led_light_mode, led_reg[1], LED_TYPE_PSU1); +} + +static enum led_brightness accton_as5712_54x_led_psu_1_get(struct led_classdev *cdev) +{ + accton_as5712_54x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_PSU1, ledctl->reg_val[1]); +} + +static void accton_as5712_54x_led_psu_2_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5712_54x_led_set(led_cdev, led_light_mode, led_reg[1], LED_TYPE_PSU2); +} + +static enum led_brightness accton_as5712_54x_led_psu_2_get(struct led_classdev *cdev) +{ + accton_as5712_54x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_PSU2, ledctl->reg_val[1]); +} + +static void accton_as5712_54x_led_fan_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5712_54x_led_set(led_cdev, led_light_mode, led_reg[0], LED_TYPE_FAN); +} + +static enum led_brightness accton_as5712_54x_led_fan_get(struct led_classdev *cdev) +{ + accton_as5712_54x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_FAN, ledctl->reg_val[0]); +} + + +static void accton_as5712_54x_led_fanx_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + enum led_type led_type1; + int reg_id; + int i, nsize; + int ncount = sizeof(fanx_info)/sizeof(struct fanx_info_s); + + for(i=0;iname); + + if (led_cdev->name[nsize-1] == fanx_info[i].cname) + { + led_type1 = fanx_info[i].type; + reg_id = fanx_info[i].reg_id; + accton_as5712_54x_led_set(led_cdev, led_light_mode, led_reg[reg_id], led_type1); + return; + } + } +} + + +static enum led_brightness accton_as5712_54x_led_fanx_get(struct led_classdev *cdev) +{ + enum led_type led_type1; + int reg_id; + int i, nsize; + int ncount = sizeof(fanx_info)/sizeof(struct fanx_info_s); + + for(i=0;iname); + + if (cdev->name[nsize-1] == fanx_info[i].cname) + { + led_type1 = fanx_info[i].type; + reg_id = fanx_info[i].reg_id; + accton_as5712_54x_led_update(); + return led_reg_val_to_light_mode(led_type1, ledctl->reg_val[reg_id]); + } + } + + + return led_reg_val_to_light_mode(LED_TYPE_FAN1, ledctl->reg_val[2]); +} + + +static void accton_as5712_54x_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5712_54x_led_set(led_cdev, led_light_mode, led_reg[0], LED_TYPE_DIAG); +} + +static enum led_brightness accton_as5712_54x_led_diag_get(struct led_classdev *cdev) +{ + accton_as5712_54x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void accton_as5712_54x_led_loc_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5712_54x_led_set(led_cdev, led_light_mode, led_reg[0], LED_TYPE_LOC); +} + +static enum led_brightness accton_as5712_54x_led_loc_get(struct led_classdev *cdev) +{ + accton_as5712_54x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_LOC, ledctl->reg_val[0]); +} + +static struct led_classdev accton_as5712_54x_leds[] = { + [LED_TYPE_PSU1] = { + .name = "accton_as5712_54x_led::psu1", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_psu_1_set, + .brightness_get = accton_as5712_54x_led_psu_1_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU2] = { + .name = "accton_as5712_54x_led::psu2", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_psu_2_set, + .brightness_get = accton_as5712_54x_led_psu_2_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN] = { + .name = "accton_as5712_54x_led::fan", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_fan_set, + .brightness_get = accton_as5712_54x_led_fan_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN1] = { + .name = "accton_as5712_54x_led::fan1", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_fanx_set, + .brightness_get = accton_as5712_54x_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN2] = { + .name = "accton_as5712_54x_led::fan2", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_fanx_set, + .brightness_get = accton_as5712_54x_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN3] = { + .name = "accton_as5712_54x_led::fan3", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_fanx_set, + .brightness_get = accton_as5712_54x_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN4] = { + .name = "accton_as5712_54x_led::fan4", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_fanx_set, + .brightness_get = accton_as5712_54x_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN5] = { + .name = "accton_as5712_54x_led::fan5", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_fanx_set, + .brightness_get = accton_as5712_54x_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_DIAG] = { + .name = "accton_as5712_54x_led::diag", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_diag_set, + .brightness_get = accton_as5712_54x_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_LOC] = { + .name = "accton_as5712_54x_led::loc", + .default_trigger = "unused", + .brightness_set = accton_as5712_54x_led_loc_set, + .brightness_get = accton_as5712_54x_led_loc_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, +}; + +static int accton_as5712_54x_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as5712_54x_leds); i++) { + led_classdev_suspend(&accton_as5712_54x_leds[i]); + } + + return 0; +} + +static int accton_as5712_54x_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as5712_54x_leds); i++) { + led_classdev_resume(&accton_as5712_54x_leds[i]); + } + + return 0; +} + +static int accton_as5712_54x_led_probe(struct platform_device *pdev) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(accton_as5712_54x_leds); i++) { + ret = led_classdev_register(&pdev->dev, &accton_as5712_54x_leds[i]); + + if (ret < 0) + break; + } + + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(accton_as5712_54x_leds)){ + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&accton_as5712_54x_leds[i]); + } + } + + return ret; +} + +static int accton_as5712_54x_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(accton_as5712_54x_leds); i++) { + led_classdev_unregister(&accton_as5712_54x_leds[i]); + } + + return 0; +} + +static struct platform_driver accton_as5712_54x_led_driver = { + .probe = accton_as5712_54x_led_probe, + .remove = accton_as5712_54x_led_remove, + .suspend = accton_as5712_54x_led_suspend, + .resume = accton_as5712_54x_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init accton_as5712_54x_led_init(void) +{ + int ret; + + ret = platform_driver_register(&accton_as5712_54x_led_driver); + if (ret < 0) { + goto exit; + } + + ledctl = kzalloc(sizeof(struct accton_as5712_54x_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&accton_as5712_54x_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&accton_as5712_54x_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return ret; +} + +static void __exit accton_as5712_54x_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&accton_as5712_54x_led_driver); + kfree(ledctl); +} + +module_init(accton_as5712_54x_led_init); +module_exit(accton_as5712_54x_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_as5712_54x_led driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/ym2651y.c new file mode 100755 index 000000000000..519530387e29 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/modules/ym2651y.c @@ -0,0 +1,683 @@ +/* + * An hwmon driver for the 3Y Power YM-2651Y Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_FAN_DUTY_CYCLE 100 + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +enum chips { + YM2651, + YM2401, +}; + +/* Each client has this additional data + */ +struct ym2651y_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 chip; /* chip id */ + u8 capability; /* Register value */ + u16 status_word; /* Register value */ + u8 fan_fault; /* Register value */ + u8 over_temp; /* Register value */ + u16 v_out; /* Register value */ + u16 i_out; /* Register value */ + u16 p_out; /* Register value */ + u8 vout_mode; /* Register value */ + u16 temp; /* Register value */ + u16 fan_speed; /* Register value */ + u16 fan_duty_cycle[2]; /* Register value */ + u8 fan_dir[5]; /* Register value */ + u8 pmbus_revision; /* Register value */ + u8 mfr_id[10]; /* Register value */ + u8 mfr_model[16]; /* Register value */ + u8 mfr_revsion[3]; /* Register value */ + u16 mfr_vin_min; /* Register value */ + u16 mfr_vin_max; /* Register value */ + u16 mfr_iin_max; /* Register value */ + u16 mfr_iout_max; /* Register value */ + u16 mfr_pin_max; /* Register value */ + u16 mfr_pout_max; /* Register value */ + u16 mfr_vout_min; /* Register value */ + u16 mfr_vout_max; /* Register value */ +}; + +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_word(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_vout(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf); +static struct ym2651y_data *ym2651y_update_device(struct device *dev); +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value); + +enum ym2651y_sysfs_attributes { + PSU_POWER_ON = 0, + PSU_TEMP_FAULT, + PSU_POWER_GOOD, + PSU_FAN1_FAULT, + PSU_FAN_DIRECTION, + PSU_OVER_TEMP, + PSU_V_OUT, + PSU_I_OUT, + PSU_P_OUT, + PSU_TEMP1_INPUT, + PSU_FAN1_SPEED, + PSU_FAN1_DUTY_CYCLE, + PSU_PMBUS_REVISION, + PSU_MFR_ID, + PSU_MFR_MODEL, + PSU_MFR_REVISION, + PSU_MFR_VIN_MIN, + PSU_MFR_VIN_MAX, + PSU_MFR_VOUT_MIN, + PSU_MFR_VOUT_MAX, + PSU_MFR_IIN_MAX, + PSU_MFR_IOUT_MAX, + PSU_MFR_PIN_MAX, + PSU_MFR_POUT_MAX +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_power_on, S_IRUGO, show_word, NULL, PSU_POWER_ON); +static SENSOR_DEVICE_ATTR(psu_temp_fault, S_IRUGO, show_word, NULL, PSU_TEMP_FAULT); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_word, NULL, PSU_POWER_GOOD); +static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IRUGO, show_fan_fault, NULL, PSU_FAN1_FAULT); +static SENSOR_DEVICE_ATTR(psu_over_temp, S_IRUGO, show_over_temp, NULL, PSU_OVER_TEMP); +static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, show_vout, NULL, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, show_linear, NULL, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, show_linear, NULL, PSU_P_OUT); +static SENSOR_DEVICE_ATTR(psu_temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); +static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, show_linear, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE); +static SENSOR_DEVICE_ATTR(psu_fan_dir, S_IRUGO, show_ascii, NULL, PSU_FAN_DIRECTION); +static SENSOR_DEVICE_ATTR(psu_pmbus_revision,S_IRUGO, show_byte, NULL, PSU_PMBUS_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_id, S_IRUGO, show_ascii, NULL, PSU_MFR_ID); +static SENSOR_DEVICE_ATTR(psu_mfr_model, S_IRUGO, show_ascii, NULL, PSU_MFR_MODEL); +static SENSOR_DEVICE_ATTR(psu_mfr_revision, S_IRUGO, show_ascii, NULL, PSU_MFR_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_min, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_max, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_min, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_max, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iin_max, S_IRUGO, show_linear, NULL, PSU_MFR_IIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iout_max, S_IRUGO, show_linear, NULL, PSU_MFR_IOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pin_max, S_IRUGO, show_linear, NULL, PSU_MFR_PIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pout_max, S_IRUGO, show_linear, NULL, PSU_MFR_POUT_MAX); + +static struct attribute *ym2651y_attributes[] = { + &sensor_dev_attr_psu_power_on.dev_attr.attr, + &sensor_dev_attr_psu_temp_fault.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, + &sensor_dev_attr_psu_over_temp.dev_attr.attr, + &sensor_dev_attr_psu_v_out.dev_attr.attr, + &sensor_dev_attr_psu_i_out.dev_attr.attr, + &sensor_dev_attr_psu_p_out.dev_attr.attr, + &sensor_dev_attr_psu_temp1_input.dev_attr.attr, + &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, + &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, + &sensor_dev_attr_psu_fan_dir.dev_attr.attr, + &sensor_dev_attr_psu_pmbus_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_id.dev_attr.attr, + &sensor_dev_attr_psu_mfr_model.dev_attr.attr, + &sensor_dev_attr_psu_mfr_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iout_max.dev_attr.attr, + NULL +}; + +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + if (!data->valid) { + return 0; + } + + return (attr->index == PSU_PMBUS_REVISION) ? sprintf(buf, "%d\n", data->pmbus_revision) : + sprintf(buf, "0\n"); +} + +static ssize_t show_word(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u16 status = 0; + + if (!data->valid) { + return 0; + } + + switch (attr->index) { + case PSU_POWER_ON: /* psu_power_on, low byte bit 6 of status_word, 0=>ON, 1=>OFF */ + status = (data->status_word & 0x40) ? 0 : 1; + break; + case PSU_TEMP_FAULT: /* psu_temp_fault, low byte bit 2 of status_word, 0=>Normal, 1=>temp fault */ + status = (data->status_word & 0x4) >> 2; + break; + case PSU_POWER_GOOD: /* psu_power_good, high byte bit 3 of status_word, 0=>OK, 1=>FAIL */ + status = (data->status_word & 0x800) ? 0 : 1; + break; + } + + return sprintf(buf, "%d\n", status); +} + +static int two_complement_to_int(u16 data, u8 valid_bit, int mask) +{ + u16 valid_data = data & mask; + bool is_negative = valid_data >> (valid_bit - 1); + + return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data; +} + +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1; + long speed; + int error; + + error = kstrtol(buf, 10, &speed); + if (error) + return error; + + if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->fan_duty_cycle[nr] = speed; + ym2651y_write_word(client, 0x3B + nr, data->fan_duty_cycle[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + u16 value = 0; + int exponent, mantissa; + int multiplier = 1000; + + if (!data->valid) { + return 0; + } + + switch (attr->index) { + case PSU_V_OUT: + value = data->v_out; + break; + case PSU_I_OUT: + value = data->i_out; + break; + case PSU_P_OUT: + value = data->p_out; + break; + case PSU_TEMP1_INPUT: + value = data->temp; + break; + case PSU_FAN1_SPEED: + value = data->fan_speed; + multiplier = 1; + break; + case PSU_FAN1_DUTY_CYCLE: + value = data->fan_duty_cycle[0]; + multiplier = 1; + break; + case PSU_MFR_VIN_MIN: + value = data->mfr_vin_min; + break; + case PSU_MFR_VIN_MAX: + value = data->mfr_vin_max; + break; + case PSU_MFR_VOUT_MIN: + value = data->mfr_vout_min; + break; + case PSU_MFR_VOUT_MAX: + value = data->mfr_vout_max; + break; + case PSU_MFR_PIN_MAX: + value = data->mfr_pin_max; + break; + case PSU_MFR_POUT_MAX: + value = data->mfr_pout_max; + break; + case PSU_MFR_IOUT_MAX: + value = data->mfr_iout_max; + break; + case PSU_MFR_IIN_MAX: + value = data->mfr_iin_max; + break; + } + + exponent = two_complement_to_int(value >> 11, 5, 0x1f); + mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff); + + return (exponent >= 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u8 shift; + + if (!data->valid) { + return 0; + } + + shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6; + + return sprintf(buf, "%d\n", data->fan_fault >> shift); +} + +static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct ym2651y_data *data = ym2651y_update_device(dev); + + if (!data->valid) { + return 0; + } + + return sprintf(buf, "%d\n", data->over_temp >> 7); +} + +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u8 *ptr = NULL; + + if (!data->valid) { + return 0; + } + + switch (attr->index) { + case PSU_FAN_DIRECTION: /* psu_fan_dir */ + ptr = data->fan_dir + 1; /* Skip the first byte since it is the length of string. */ + break; + case PSU_MFR_ID: /* psu_mfr_id */ + ptr = data->mfr_id + 1; /* The first byte is the count byte of string. */; + break; + case PSU_MFR_MODEL: /* psu_mfr_model */ + ptr = data->mfr_model + 1; /* The first byte is the count byte of string. */ + break; + case PSU_MFR_REVISION: /* psu_mfr_revision */ + ptr = data->mfr_revsion + 1; /* The first byte is the count byte of string. */ + break; + default: + return 0; + } + + return sprintf(buf, "%s\n", ptr); +} + +static ssize_t show_vout_by_mode(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct ym2651y_data *data = ym2651y_update_device(dev); + int exponent, mantissa; + int multiplier = 1000; + + if (!data->valid) { + return 0; + } + + exponent = two_complement_to_int(data->vout_mode, 5, 0x1f); + mantissa = data->v_out; + + return (exponent > 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_vout(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + + if (data->chip == YM2401) { + return show_vout_by_mode(dev, da, buf); + } + + return show_linear(dev, da, buf); +} + +static const struct attribute_group ym2651y_group = { + .attrs = ym2651y_attributes, +}; + +static int ym2651y_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct ym2651y_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct ym2651y_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->chip = dev_id->driver_data; + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &ym2651y_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &ym2651y_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int ym2651y_remove(struct i2c_client *client) +{ + struct ym2651y_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &ym2651y_group); + kfree(data); + + return 0; +} + +static const struct i2c_device_id ym2651y_id[] = { + { "ym2651", YM2651 }, + { "ym2401", YM2401 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ym2651y_id); + +static struct i2c_driver ym2651y_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ym2651", + }, + .probe = ym2651y_probe, + .remove = ym2651y_remove, + .id_table = ym2651y_id, + .address_list = normal_i2c, +}; + +static int ym2651y_read_byte(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int ym2651y_read_word(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_data(client, reg); +} + +static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value) +{ + return i2c_smbus_write_word_data(client, reg, value); +} + +static int ym2651y_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) + goto abort; + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + + result = 0; + +abort: + return result; +} + +struct reg_data_byte { + u8 reg; + u8 *value; +}; + +struct reg_data_word { + u8 reg; + u16 *value; +}; + +static struct ym2651y_data *ym2651y_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i, status, length; + u8 command, buf; + struct reg_data_byte regs_byte[] = { {0x19, &data->capability}, + {0x20, &data->vout_mode}, + {0x7d, &data->over_temp}, + {0x81, &data->fan_fault}, + {0x98, &data->pmbus_revision}}; + struct reg_data_word regs_word[] = { {0x79, &data->status_word}, + {0x8b, &data->v_out}, + {0x8c, &data->i_out}, + {0x96, &data->p_out}, + {0x8d, &data->temp}, + {0x3b, &(data->fan_duty_cycle[0])}, + {0x3c, &(data->fan_duty_cycle[1])}, + {0x90, &data->fan_speed}, + {0xa0, &data->mfr_vin_min}, + {0xa1, &data->mfr_vin_max}, + {0xa2, &data->mfr_iin_max}, + {0xa3, &data->mfr_pin_max}, + {0xa4, &data->mfr_vout_min}, + {0xa5, &data->mfr_vout_max}, + {0xa6, &data->mfr_iout_max}, + {0xa7, &data->mfr_pout_max}}; + + dev_dbg(&client->dev, "Starting ym2651 update\n"); + data->valid = 0; + + /* Read byte data */ + for (i = 0; i < ARRAY_SIZE(regs_byte); i++) { + status = ym2651y_read_byte(client, regs_byte[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_byte[i].reg, status); + goto exit; + } + else { + *(regs_byte[i].value) = status; + } + } + + /* Read word data */ + for (i = 0; i < ARRAY_SIZE(regs_word); i++) { + status = ym2651y_read_word(client, regs_word[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_word[i].reg, status); + goto exit; + } + else { + *(regs_word[i].value) = status; + } + } + + /* Read fan_direction */ + command = 0xC3; + status = ym2651y_read_block(client, command, data->fan_dir, + ARRAY_SIZE(data->fan_dir)-1); + data->fan_dir[ARRAY_SIZE(data->fan_dir)-1] = '\0'; + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + /* Read mfr_id */ + command = 0x99; + status = ym2651y_read_block(client, command, data->mfr_id, + ARRAY_SIZE(data->mfr_id)-1); + data->mfr_id[ARRAY_SIZE(data->mfr_id)-1] = '\0'; + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + /* Read mfr_model */ + command = 0x9a; + length = 1; + + /* Read first byte to determine the length of data */ + status = ym2651y_read_block(client, command, &buf, length); + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + status = ym2651y_read_block(client, command, data->mfr_model, buf+1); + data->mfr_model[buf+1] = '\0'; + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + /* Read mfr_revsion */ + command = 0x9b; + status = ym2651y_read_block(client, command, data->mfr_revsion, + ARRAY_SIZE(data->mfr_revsion)-1); + data->mfr_revsion[ARRAY_SIZE(data->mfr_revsion)-1] = '\0'; + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + data->last_updated = jiffies; + data->valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init ym2651y_init(void) +{ + return i2c_add_driver(&ym2651y_driver); +} + +static void __exit ym2651y_exit(void) +{ + i2c_del_driver(&ym2651y_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("3Y Power YM-2651Y driver"); +MODULE_LICENSE("GPL"); + +module_init(ym2651y_init); +module_exit(ym2651y_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/service/as5712-platform-monitor.service b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/service/as5712-platform-monitor.service new file mode 100755 index 000000000000..da5d283a6d61 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/service/as5712-platform-monitor.service @@ -0,0 +1,17 @@ +[Unit] +Description=Accton AS5712-54X Platform Monitoring service +Before=pmon.service +After=sysinit.target +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/local/bin/accton_as5712_util.py install +ExecStart=/usr/local/bin/accton_as5712_monitor.py +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/setup.py b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/setup.py new file mode 100755 index 000000000000..f4cb5f960a4d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/setup.py @@ -0,0 +1,16 @@ +#!/usr/bin/env python + +import os +import sys +from setuptools import setup +os.listdir + +setup( + name='as5712_54x', + version='1.0', + description='Module to initialize Accton AS5712-54X platforms', + + packages=['as5712_54x'], + package_dir={'as5712_54x': 'as5712-54x/classes'}, +) + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/README b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/README new file mode 100755 index 000000000000..44e03cab5f52 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/README @@ -0,0 +1,117 @@ +Copyright (C) 2016 Accton Networks, Inc. + +This program is free software: you can redistribute it and/or modify +It under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +Contents of this package: + patch - files under patch/ is for kernel and ONIE installer + for the kernel: + config-accton-as5712_54x.patch + for kernel configuration. + driver-i2c-muxes-pca954x-always-deselect.patch + for i2c_mux deselects after transaction. + driver-patches-for-accton-as5712-fan-psu-cpld.patch + for as5712's fan/psu/cpld/led/sfp drivers. + for ONIE: + onie_installer-accton-AS5712-54X.patch + for console port setting and copy util script o rootfs. + module - Contains source code of as5712 kernel driver modules. + +The late Sonic building scripts, pushed @Dec 5 2016, will automatically +create a docker container and run building process under it. +User is not necessary to handle docker environment creation. + +1. Download sonic-buildimage environment. + - Run "git clone https://github.com/Azure/sonic-buildimage". + - cd to sonic-buildimage and run "git submodule update --init --recursive". +2. Build kernel + - cd ./src/sonic-linux-kernel + - Copy patches and series from patch/kernel of this release to + sonic-linux-kernel/patch. + - Build kernel by "make". + - The built kernel package, linux-image-3.16.0-5-amd64_3.16.51-3+deb8u1_amd64.deb + , is generated. +3. Build installer + - Change directory back to sonic-buildimage/. + - Get onie_installer-accton-AS5712-54X.patch" from patch/installer. + - Change setting for AS5712-54X by patching build_image.sh. + "patch -p1 < onie_installer-accton-AS5712-54X.patch" + !!NOTICE, patching onie_installer-accton-AS5712-54X.patch comments out the + "git status" checking at build_image.sh. + - The account and password of installed OS can be given at rules/config. + The default user and password are "admin" & "YourPaSsWoRd" respectively. + - Run "make configure PLATFORM=broadcom" + - Copy the built kernel debian package to target/debs/. + The file is linux-image-3.16.0-5-amd64_*_amd64.deb under directory + src/sonic-linux-kernel/. + - Run "make target/sonic-generic.bin" + - Get the installer, target/sonic-generic.bin, to target machine and install. + +All Linux kernel code is licensed under the GPLv1. All other code is +licensed under the GPLv3. Please see the LICENSE file for copies of +both licenses. + +The code for integacting with Accton AS5712-54X has 2 parts, +kernel drivers and operational script. +The kernel drivers of peripherals are under module/ directory. +1. These drivers are patched into kernel by + driver-patches-for-accton-as5712-fan-psu-cpld.patch + Or you can build the driver under module/ by setting environment variable, + KERNEL_SRC, to proper linux built directory and run make. + It may be sonic-linux-kernel/linux-3.*/debian/build/build_amd64_none_amd64/. +2. A operational script, accton_as5712_util.py, for device initializatian and + peripheral accessing should be installed at /usr/bin. + This script is generated by onie_installer-accton-AS5712-54X.patch. + It's done by patching onie_installer-accton-AS5712-54X.patch at build-image. + Run "accton_as5712_util.py install" to install drivers. + +To initialize the system, run "accton_as5712_util.py install". +To clean up the drivers & devices, run "accton_as5712_util.py clean". +To dump information of sensors, run "accton_as5712_util.py show". +To dump SFP EEPROM, run "accton_as5712_util.py sff". +To set fan speed, run "accton_as5712_util.py set fan". +To enable/disable SFP emission, run "accton_as5712_util.py set sfp". +To set system LEDs' color, run "accton_as5712_util.py set led" +For more information, run "accton_as5712_util.py --help". + +==================================================================== +Besides applying accton_as5712_util.py to access peripherals, you can +access peripherals by sysfs nodes directly after the installation is run. + +System LED: + There are 5 system LEDs at the lower-left corner of front panel. + They are loc, diag, fan, ps1, and ps2. + The sysfs interface color mappings are as follows: + Brightness: + 0 => off + 1 => green + 2 => amber + 3 => red + 4 => blue + But not all colors are available for each LED. + +Fan Control: + There are 10 fans inside 5 fan modules. + All fans share 1 duty setting, ranged from 0~100. + +Thermal sensers: + 3 temperature sensors are controlled by the lm75 kernel modules. + +PSUs: + There 2 power supplies slot at the left/right side of the back. + Once if a PSU is not plugged, the status of it is shown failed. + +There are 48 SFP+ and 6 QSFP modules are equipped. +Before operating on PSU and QSFP+, please make sure it is well plugged. +Otherwise, operation is going to fail. + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/accton_as5712_monitor.py b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/accton_as5712_monitor.py new file mode 100755 index 000000000000..84ab2d83bab4 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/accton_as5712_monitor.py @@ -0,0 +1,195 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# +# ------------------------------------------------------------------ + +try: + import os + import sys, getopt + import subprocess + import click + import imp + import logging + import logging.config + import types + import time # this is only being used as part of the example + import traceback + from tabulate import tabulate + from as5712_54x.fanutil import FanUtil + from as5712_54x.thermalutil import ThermalUtil +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +# Deafults +VERSION = '1.0' +FUNCTION_NAME = 'accton_as5712_monitor' + +global log_file +global log_level + +# Make a class we can use to capture stdout and sterr in the log +class accton_as5712_monitor(object): + # static temp var + _ori_temp = 0 + _new_perc = 0 + _ori_perc = 0 + + def __init__(self, log_file, log_level): + """Needs a logger and a logger level.""" + # set up logging to file + logging.basicConfig( + filename=log_file, + filemode='w', + level=log_level, + format= '[%(asctime)s] {%(pathname)s:%(lineno)d} %(levelname)s - %(message)s', + datefmt='%H:%M:%S' + ) + + # set up logging to console + if log_level == logging.DEBUG: + console = logging.StreamHandler() + console.setLevel(log_level) + formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') + console.setFormatter(formatter) + logging.getLogger('').addHandler(console) + + logging.debug('SET. logfile:%s / loglevel:%d', log_file, log_level) + + def manage_fans(self): + FAN_LEV1_UP_TEMP = 57500 # temperature + FAN_LEV1_DOWN_TEMP = 0 # unused + FAN_LEV1_SPEED_PERC = 100 # percentage*/ + + FAN_LEV2_UP_TEMP = 53000 + FAN_LEV2_DOWN_TEMP = 52700 + FAN_LEV2_SPEED_PERC = 80 + + FAN_LEV3_UP_TEMP = 49500 + FAN_LEV3_DOWN_TEMP = 47700 + FAN_LEV3_SPEED_PERC = 65 + + FAN_LEV4_UP_TEMP = 0 # unused + FAN_LEV4_DOWN_TEMP = 42700 + FAN_LEV4_SPEED_PERC = 40 + + + thermal = ThermalUtil() + fan = FanUtil() + + temp1 = thermal.get_thermal_1_val() + if temp1 is None: + return False + + temp2 = thermal.get_thermal_2_val() + if temp2 is None: + return False + + new_temp = (temp1 + temp2) / 2 + + for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): + fan_stat = fan.get_fan_status(x) + if fan_stat is None: + return False + if fan_stat is False: + self._new_perc = FAN_LEV1_SPEED_PERC + logging.debug('INFO. SET new_perc to %d (FAN fault. fan_num:%d)', self._new_perc, x) + break + logging.debug('INFO. fan_stat is True (fan_num:%d)', x) + + if fan_stat is not None and fan_stat is not False: + diff = new_temp - self._ori_temp + if diff == 0: + logging.debug('INFO. RETURN. THERMAL temp not changed. %d / %d (new_temp / ori_temp)', new_temp, self._ori_temp) + return True + else: + if diff >= 0: + is_up = True + logging.debug('INFO. THERMAL temp UP %d / %d (new_temp / ori_temp)', new_temp, self._ori_temp) + else: + is_up = False + logging.debug('INFO. THERMAL temp DOWN %d / %d (new_temp / ori_temp)', new_temp, self._ori_temp) + + if is_up is True: + if new_temp >= FAN_LEV1_UP_TEMP: + self._new_perc = FAN_LEV1_SPEED_PERC + elif new_temp >= FAN_LEV2_UP_TEMP: + self._new_perc = FAN_LEV2_SPEED_PERC + elif new_temp >= FAN_LEV3_UP_TEMP: + self._new_perc = FAN_LEV3_SPEED_PERC + else: + self._new_perc = FAN_LEV4_SPEED_PERC + logging.debug('INFO. SET. FAN_SPEED as %d (new THERMAL temp:%d)', self._new_perc, new_temp) + else: + if new_temp <= FAN_LEV4_DOWN_TEMP: + self._new_perc = FAN_LEV4_SPEED_PERC + elif new_temp <= FAN_LEV3_DOWN_TEMP: + self._new_perc = FAN_LEV3_SPEED_PERC + elif new_temp <= FAN_LEV2_DOWN_TEMP: + self._new_perc = FAN_LEV2_SPEED_PERC + else: + self._new_perc = FAN_LEV1_SPEED_PERC + logging.debug('INFO. SET. FAN_SPEED as %d (new THERMAL temp:%d)', self._new_perc, new_temp) + + if self._ori_perc == self._new_perc: + logging.debug('INFO. RETURN. FAN speed not changed. %d / %d (new_perc / ori_perc)', self._new_perc, self._ori_perc) + return True + + set_stat = fan.set_fan_duty_cycle(fan.get_idx_fan_start(), self._new_perc) + if set_stat is True: + logging.debug('INFO: PASS. set_fan_duty_cycle (%d)', self._new_perc) + else: + logging.debug('INFO: FAIL. set_fan_duty_cycle (%d)', self._new_perc) + + logging.debug('INFO: GET. ori_perc is %d. ori_temp is %d', self._ori_perc, self._ori_temp) + self._ori_perc = self._new_perc + self._ori_temp = new_temp + logging.debug('INFO: UPDATE. ori_perc to %d. ori_temp to %d', self._ori_perc, self._ori_temp) + + return True + +def main(argv): + log_file = '%s.log' % FUNCTION_NAME + log_level = logging.INFO + if len(sys.argv) != 1: + try: + opts, args = getopt.getopt(argv,'hdl:',['lfile=']) + except getopt.GetoptError: + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + for opt, arg in opts: + if opt == '-h': + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + elif opt in ('-d', '--debug'): + log_level = logging.DEBUG + elif opt in ('-l', '--lfile'): + log_file = arg + + monitor = accton_as5712_monitor(log_file, log_level) + + # Loop forever, doing something useful hopefully: + while True: + monitor.manage_fans() + time.sleep(1) + +if __name__ == '__main__': + main(sys.argv[1:]) diff --git a/platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/accton_as5712_util.py b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/accton_as5712_util.py new file mode 100755 index 000000000000..e958cb596862 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5712-54x/utils/accton_as5712_util.py @@ -0,0 +1,602 @@ +#!/usr/bin/env python +# +# Copyright (C) 2016 Accton Networks, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes + show : show all systen status + sff : dump SFP eeprom + set : change board setting with fan|led|sfp +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + +PROJECT_NAME = 'as5712_54x' +version = '0.2.0' +verbose = False +DEBUG = False +args = [] +ALL_DEVICE = {} +DEVICE_NO = {'led':5, 'fan1':1, 'fan2':1,'fan3':1,'fan4':1,'fan5':1,'thermal':3, 'psu':2, 'sfp':54} + + +led_prefix ='/sys/devices/platform/as5712_54x_led/leds/accton_'+PROJECT_NAME+'_led::' +fan_prefix ='/sys/devices/platform/as5712_54x_' +hwmon_types = {'led': ['diag','fan','loc','psu1','psu2'], + 'fan1': ['fan'], + 'fan2': ['fan'], + 'fan3': ['fan'], + 'fan4': ['fan'], + 'fan5': ['fan'], + } +hwmon_nodes = {'led': ['brightness'] , + 'fan1': ['fan1_duty_cycle_percentage', 'fan1_fault', 'fan1_speed_rpm', 'fan1_direction', 'fanr1_fault', 'fanr1_speed_rpm'], + 'fan2': ['fan2_duty_cycle_percentage','fan2_fault', 'fan2_speed_rpm', 'fan2_direction', 'fanr2_fault', 'fanr2_speed_rpm'], + 'fan3': ['fan3_duty_cycle_percentage','fan3_fault', 'fan3_speed_rpm', 'fan3_direction', 'fanr3_fault', 'fanr3_speed_rpm'], + 'fan4': ['fan4_duty_cycle_percentage','fan4_fault', 'fan4_speed_rpm', 'fan4_direction', 'fanr4_fault', 'fanr4_speed_rpm'], + 'fan5': ['fan5_duty_cycle_percentage','fan5_fault', 'fan5_speed_rpm', 'fan5_direction', 'fanr5_fault', 'fanr5_speed_rpm'], + } +hwmon_prefix ={'led': led_prefix, + 'fan1': fan_prefix, + 'fan2': fan_prefix, + 'fan3': fan_prefix, + 'fan4': fan_prefix, + 'fan5': fan_prefix, + } + +i2c_prefix = '/sys/bus/i2c/devices/' +i2c_bus = {'thermal': ['61-0048','62-0049', '63-004a'] , + 'psu': ['57-0050','58-0053'], + 'sfp': ['-0050']} +i2c_nodes = { + 'thermal': ['hwmon/hwmon*/temp1_input'] , + 'psu': ['psu_present ', 'psu_power_good'] , + 'sfp': ['sfp_is_present ', 'sfp_tx_disable']} + +sfp_map = [2, 3, 4, 5, 6, 7, 8, 9, 10, + 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, + 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, + 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, + 41, 42, 43, 44, 45, 46, 47, 48, 49, + 50, 52, 54, 51, 53, 55] +mknod =[ +'echo as5712_54x_cpld1 0x60 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo as5712_54x_cpld2 0x61 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo as5712_54x_cpld3 0x62 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-1/new_device', + +# PSU-1 +'echo as5712_54x_psu1 0x38 > /sys/bus/i2c/devices/i2c-57/new_device', +'echo cpr_4011_4mxx 0x3c > /sys/bus/i2c/devices/i2c-57/new_device', +'echo as5712_54x_psu1 0x50 > /sys/bus/i2c/devices/i2c-57/new_device', + +# PSU-2 +'echo as5712_54x_psu2 0x3b > /sys/bus/i2c/devices/i2c-58/new_device', +'echo cpr_4011_4mxx 0x3f > /sys/bus/i2c/devices/i2c-58/new_device', +'echo as5712_54x_psu2 0x53 > /sys/bus/i2c/devices/i2c-58/new_device', + +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-61/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-62/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-63/new_device', + +#EERPOM +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-1/new_device', +] + +mknod2 =[ +'echo as5712_54x_cpld1 0x60 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo as5712_54x_cpld2 0x61 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo as5712_54x_cpld3 0x62 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-0/new_device', + +# PSU-1 +'echo as5712_54x_psu1 0x38 > /sys/bus/i2c/devices/i2c-57/new_device', +'echo cpr_4011_4mxx 0x3c > /sys/bus/i2c/devices/i2c-57/new_device', +'echo as5712_54x_psu1 0x50 > /sys/bus/i2c/devices/i2c-57/new_device', + +# PSU-2 +'echo as5712_54x_psu2 0x3b > /sys/bus/i2c/devices/i2c-58/new_device', +'echo cpr_4011_4mxx 0x3f > /sys/bus/i2c/devices/i2c-58/new_device', +'echo as5712_54x_psu2 0x53 > /sys/bus/i2c/devices/i2c-58/new_device', + +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-61/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-62/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-63/new_device', + +#EERPOM +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-1/new_device', +] + +FORCE = 0 +logging.basicConfig(filename= PROJECT_NAME+'.log', filemode='w',level=logging.DEBUG) +logging.basicConfig(level=logging.INFO) + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + do_install() + elif arg == 'clean': + do_uninstall() + elif arg == 'show': + device_traversal() + elif arg == 'sff': + if len(args)!=2: + show_eeprom_help() + elif int(args[1]) ==0 or int(args[1]) > DEVICE_NO['sfp']: + show_eeprom_help() + else: + show_eeprom(args[1]) + return + elif arg == 'set': + if len(args)<3: + show_set_help() + else: + set_device(args[1:]) + return + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_set_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print cmd +" [led|sfp|fan]" + print " use \""+ cmd + " led 0-4 \" to set led color" + print " use \""+ cmd + " fan 0-100\" to set fan duty percetage" + print " use \""+ cmd + " sfp 1-54 {0|1}\" to set sfp# tx_disable" + sys.exit(0) + +def show_eeprom_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print " use \""+ cmd + " 1-54 \" to dump sfp# eeprom" + sys.exit(0) + +def my_log(txt): + if DEBUG == True: + print "[ACCTON DBG]: "+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status = 1 + output = "" + status, output = commands.getstatusoutput(cmd) + my_log (cmd +"with result:" + str(status)) + my_log ("cmd:" + cmd) + my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +def driver_inserted(): + ret, lsmod = log_os_system("lsmod| grep accton", 0) + logging.info('mods:'+lsmod) + if len(lsmod) ==0: + return False + + + +kos = [ +'depmod -ae', +'modprobe i2c_dev', +'modprobe i2c_mux_pca954x', +'modprobe optoe', +'modprobe i2c-mux-accton_as5712_54x_cpld', +'modprobe cpr_4011_4mxx', +'modprobe ym2651y', +'modprobe accton_as5712_54x_fan', +'modprobe leds-accton_as5712_54x', +'modprobe accton_as5712_54x_psu'] + +def driver_install(): + global FORCE + for i in range(0,len(kos)): + status, output = log_os_system(kos[i], 1) + if status: + if FORCE == 0: + return status + return 0 + +def driver_uninstall(): + global FORCE + for i in range(0,len(kos)): + rm = kos[-(i+1)].replace("modprobe", "modprobe -rq") + rm = rm.replace("insmod", "rmmod") + status, output = log_os_system(rm, 1) + if status: + if FORCE == 0: + return status + return 0 + + + +def i2c_order_check(): + # i2c bus 0 and 1 might be installed in different order. + # Here check if 0x70 is exist @ i2c-0 + tmp = "echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-1/new_device" + status, output = log_os_system(tmp, 0) + if not device_exist(): + order = 1 + else: + order = 0 + tmp = "echo 0x70 > /sys/bus/i2c/devices/i2c-1/delete_device" + status, output = log_os_system(tmp, 0) + return order + +def device_install(): + global FORCE + + order = i2c_order_check() + # if 0x76 is not exist @i2c-0, use reversed bus order + if order: + for i in range(0,len(mknod2)): + #for pca954x need times to built new i2c buses + if mknod2[i].find('pca954') != -1: + time.sleep(2) + + status, output = log_os_system(mknod2[i], 1) + if status: + print output + if FORCE == 0: + return status + else: + for i in range(0,len(mknod)): + #for pca954x need times to built new i2c buses + if mknod[i].find('pca954') != -1: + time.sleep(2) + + status, output = log_os_system(mknod[i], 1) + if status: + print output + if FORCE == 0: + return status + + for i in range(0,len(sfp_map)): + status, output =log_os_system("echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + status, output =log_os_system("echo port"+str(i)+" > /sys/bus/i2c/devices/"+str(sfp_map[i])+"-0050/port_name", 1) + if status: + print output + if FORCE == 0: + return status + + return + +def device_uninstall(): + global FORCE + + status, output =log_os_system("ls /sys/bus/i2c/devices/0-0070", 0) + if status==0: + I2C_ORDER=1 + else: + I2C_ORDER=0 + + for i in range(0,len(sfp_map)): + target = "/sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/delete_device" + status, output =log_os_system("echo 0x50 > "+ target, 1) + if status: + print output + if FORCE == 0: + return status + + if I2C_ORDER==0: + nodelist = mknod + else: + nodelist = mknod2 + + for i in range(len(nodelist)): + target = nodelist[-(i+1)] + temp = target.split() + del temp[1] + temp[-1] = temp[-1].replace('new_device', 'delete_device') + status, output = log_os_system(" ".join(temp), 1) + if status: + print output + if FORCE == 0: + return status + + return + +def system_ready(): + if driver_inserted() == False: + return False + if not device_exist(): + return False + return True + +def do_install(): + print "Checking system...." + if driver_inserted() == False: + print "No driver, installing...." + status = driver_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" drivers detected...." + if not device_exist(): + print "No device, installing...." + status = device_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" devices detected...." + return + +def do_uninstall(): + print "Checking system...." + if not device_exist(): + print PROJECT_NAME.upper() +" has no device installed...." + else: + print "Removing device...." + status = device_uninstall() + if status: + if FORCE == 0: + return status + + if driver_inserted()== False : + print PROJECT_NAME.upper() +" has no driver installed...." + else: + print "Removing installed driver...." + status = driver_uninstall() + if status: + if FORCE == 0: + return status + + return + +def devices_info(): + global DEVICE_NO + global ALL_DEVICE + global i2c_bus, hwmon_types + for key in DEVICE_NO: + ALL_DEVICE[key]= {} + for i in range(0,DEVICE_NO[key]): + ALL_DEVICE[key][key+str(i+1)] = [] + + for key in i2c_bus: + buses = i2c_bus[key] + nodes = i2c_nodes[key] + for i in range(0,len(buses)): + for j in range(0,len(nodes)): + if 'fan' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ buses[i]+"/fan"+str(k+1)+"_"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + elif 'sfp' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ str(sfp_map[k])+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + else: + node = key+str(i+1) + path = i2c_prefix+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + + for key in hwmon_types: + itypes = hwmon_types[key] + nodes = hwmon_nodes[key] + for i in range(0,len(itypes)): + for j in range(0,len(nodes)): + node = key+"_"+itypes[i] + path = hwmon_prefix[key]+ itypes[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][ key+str(i+1)].append(path) + + #show dict all in the order + if DEBUG == True: + for i in sorted(ALL_DEVICE.keys()): + print(i+": ") + for j in sorted(ALL_DEVICE[i].keys()): + print(" "+j) + for k in (ALL_DEVICE[i][j]): + print(" "+" "+k) + return + +def show_eeprom(index): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + node = ALL_DEVICE['sfp'] ['sfp'+str(index)][0] + node = node.replace(node.split("/")[-1], 'sfp_eeprom') + # check if got hexdump command in current environment + ret, log = log_os_system("which hexdump", 0) + ret, log2 = log_os_system("which busybox hexdump", 0) + if len(log): + hex_cmd = 'hexdump' + elif len(log2): + hex_cmd = ' busybox hexdump' + else: + log = 'Failed : no hexdump cmd!!' + logging.info(log) + print log + return 1 + + print node + ":" + ret, log = log_os_system("cat "+node+"| "+hex_cmd+" -C", 1) + if ret==0: + print log + else: + print "**********device no found**********" + return + +def set_device(args): + global DEVICE_NO + global ALL_DEVICE + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + + if args[0]=='led': + if int(args[1])>4: + show_set_help() + return + #print ALL_DEVICE['led'] + for i in range(0,len(ALL_DEVICE['led'])): + for k in (ALL_DEVICE['led']['led'+str(i+1)]): + ret, log = log_os_system("echo "+args[1]+" >"+k, 1) + if ret: + return ret + elif args[0]=='fan': + if int(args[1])>100: + show_set_help() + return + #print ALL_DEVICE['fan'] + #fan1~6 is all fine, all fan share same setting + node = ALL_DEVICE['fan1'] ['fan11'][0] + node = node.replace(node.split("/")[-1], 'fan1_duty_cycle_percentage') + ret, log = log_os_system("cat "+ node, 1) + if ret==0: + print ("Previous fan duty: " + log.strip() +"%") + ret, log = log_os_system("echo "+args[1]+" >"+node, 1) + if ret==0: + print ("Current fan duty: " + args[1] +"%") + return ret + elif args[0]=='sfp': + if int(args[1])> DEVICE_NO[args[0]] or int(args[1])==0: + show_set_help() + return + if len(args)<2: + show_set_help() + return + + if int(args[2])>1: + show_set_help() + return + + #print ALL_DEVICE[args[0]] + for i in range(0,len(ALL_DEVICE[args[0]])): + for j in ALL_DEVICE[args[0]][args[0]+str(args[1])]: + if j.find('tx_disable')!= -1: + ret, log = log_os_system("echo "+args[2]+" >"+ j, 1) + if ret: + return ret + + return + +#get digits inside a string. +#Ex: 31 for "sfp31" +def get_value(input): + digit = re.findall('\d+', input) + return int(digit[0]) + +def device_traversal(): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + for i in sorted(ALL_DEVICE.keys()): + print("============================================") + print(i.upper()+": ") + print("============================================") + + for j in sorted(ALL_DEVICE[i].keys(), key=get_value): + print " "+j+":", + for k in (ALL_DEVICE[i][j]): + ret, log = log_os_system("cat "+k, 0) + func = k.split("/")[-1].strip() + func = re.sub(j+'_','',func,1) + func = re.sub(i.lower()+'_','',func,1) + if ret==0: + print func+"="+log+" ", + else: + print func+"="+"X"+" ", + print + print("----------------------------------------------------------------") + + + print + return + +def device_exist(): + ret1, log = log_os_system("ls "+i2c_prefix+"*0070", 0) + ret2, log = log_os_system("ls "+i2c_prefix+"i2c-2", 0) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/Makefile b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/Makefile new file mode 100644 index 000000000000..697dcff656c3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/Makefile @@ -0,0 +1,4 @@ +obj-m:=accton_i2c_cpld.o x86-64-accton-as5812-54t-fan.o \ + x86-64-accton-as5812-54t-leds.o x86-64-accton-as5812-54t-psu.o \ + x86-64-accton-as5812-54t-sfp.o ym2651y.o + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/accton_i2c_cpld.c b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/accton_i2c_cpld.c new file mode 100644 index 000000000000..c01d6bcca228 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/accton_i2c_cpld.c @@ -0,0 +1,330 @@ +/* + * A hwmon driver for the accton_i2c_cpld + * + * Copyright (C) 2013 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +/* Addresses scanned for accton_i2c_cpld + */ +static const unsigned short normal_i2c[] = { 0x31, 0x35, 0x60, 0x61, 0x62, 0x64, I2C_CLIENT_END }; + +static ssize_t show_cpld_version(struct device *dev, struct device_attribute *attr, char *buf) +{ + int val = 0; + struct i2c_client *client = to_i2c_client(dev); + + val = i2c_smbus_read_byte_data(client, 0x1); + + if (val < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x1) err %d\n", client->addr, val); + } + + return sprintf(buf, "%d", val); +} + +static struct device_attribute ver = __ATTR(version, 0600, show_cpld_version, NULL); + +static void accton_i2c_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void accton_i2c_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static int accton_i2c_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&client->dev, "i2c_check_functionality failed (0x%x)\n", client->addr); + status = -EIO; + goto exit; + } + + status = sysfs_create_file(&client->dev.kobj, &ver.attr); + if (status) { + goto exit; + } + + dev_info(&client->dev, "chip found\n"); + accton_i2c_cpld_add_client(client); + + return 0; + +exit: + return status; +} + +static int accton_i2c_cpld_remove(struct i2c_client *client) +{ + sysfs_remove_file(&client->dev.kobj, &ver.attr); + accton_i2c_cpld_remove_client(client); + + return 0; +} + +static const struct i2c_device_id accton_i2c_cpld_id[] = { + { "accton_i2c_cpld", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, accton_i2c_cpld_id); + +static struct i2c_driver accton_i2c_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "accton_i2c_cpld", + }, + .probe = accton_i2c_cpld_probe, + .remove = accton_i2c_cpld_remove, + .id_table = accton_i2c_cpld_id, + .address_list = normal_i2c, +}; + +int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_read_byte_data(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(accton_i2c_cpld_read); + +int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_write_byte_data(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(accton_i2c_cpld_write); + +static int __init accton_i2c_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&accton_i2c_cpld_driver); +} + +static void __exit accton_i2c_cpld_exit(void) +{ + i2c_del_driver(&accton_i2c_cpld_driver); +} + +static struct dmi_system_id as7512_dmi_table[] = { + { + .ident = "Accton AS7512", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS7512"), + }, + }, + { + .ident = "Accton AS7512", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS7512"), + }, + }, +}; + +int platform_accton_as7512_32x(void) +{ + return dmi_check_system(as7512_dmi_table); +} +EXPORT_SYMBOL(platform_accton_as7512_32x); + +static struct dmi_system_id as7712_dmi_table[] = { + { + .ident = "Accton AS7712", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS7712"), + }, + }, + { + .ident = "Accton AS7712", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS7712"), + }, + }, +}; + +int platform_accton_as7712_32x(void) +{ + return dmi_check_system(as7712_dmi_table); +} +EXPORT_SYMBOL(platform_accton_as7712_32x); + +static struct dmi_system_id as5812_54t_dmi_table[] = { + { + .ident = "Accton AS5812 54t", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS5812-54T"), + }, + }, + { + .ident = "Accton AS5812 54t", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS5812-54T"), + }, + }, +}; + +int platform_accton_as5812_54t(void) +{ + return dmi_check_system(as5812_54t_dmi_table); +} +EXPORT_SYMBOL(platform_accton_as5812_54t); + +static struct dmi_system_id as5512_54x_dmi_table[] = { + { + .ident = "Accton AS5512", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS5512"), + }, + }, + { + .ident = "Accton AS5512", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS5512"), + }, + }, +}; + +int platform_accton_as5512_54x(void) +{ + return dmi_check_system(as5512_54x_dmi_table); +} +EXPORT_SYMBOL(platform_accton_as5512_54x); + +static struct dmi_system_id as7716_dmi_table[] = { + { + .ident = "Accton AS7716", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS7716"), + }, + }, + { + .ident = "Accton AS7716", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS7716"), + }, + }, +}; + +int platform_accton_as7716_32x(void) +{ + return dmi_check_system(as7716_dmi_table); +} +EXPORT_SYMBOL(platform_accton_as7716_32x); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_i2c_cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(accton_i2c_cpld_init); +module_exit(accton_i2c_cpld_exit); diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-fan.c b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-fan.c new file mode 100644 index 000000000000..bad9245e93ac --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-fan.c @@ -0,0 +1,442 @@ +/* + * A hwmon driver for the Accton as5812 54t fan + * + * Copyright (C) 2015 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define FAN_MAX_NUMBER 5 +#define FAN_SPEED_CPLD_TO_RPM_STEP 150 +#define FAN_SPEED_PRECENT_TO_CPLD_STEP 5 +#define FAN_DUTY_CYCLE_MIN 0 +#define FAN_DUTY_CYCLE_MAX 100 /* 100% */ + +#define CPLD_REG_FAN_STATUS_OFFSET 0xC +#define CPLD_REG_FANR_STATUS_OFFSET 0x1F +#define CPLD_REG_FAN_DIRECTION_OFFSET 0x1E + +#define CPLD_FAN1_REG_SPEED_OFFSET 0x10 +#define CPLD_FAN2_REG_SPEED_OFFSET 0x11 +#define CPLD_FAN3_REG_SPEED_OFFSET 0x12 +#define CPLD_FAN4_REG_SPEED_OFFSET 0x13 +#define CPLD_FAN5_REG_SPEED_OFFSET 0x14 + +#define CPLD_FANR1_REG_SPEED_OFFSET 0x18 +#define CPLD_FANR2_REG_SPEED_OFFSET 0x19 +#define CPLD_FANR3_REG_SPEED_OFFSET 0x1A +#define CPLD_FANR4_REG_SPEED_OFFSET 0x1B +#define CPLD_FANR5_REG_SPEED_OFFSET 0x1C + +#define CPLD_REG_FAN_PWM_CYCLE_OFFSET 0xD + +#define CPLD_FAN1_INFO_BIT_MASK 0x1 +#define CPLD_FAN2_INFO_BIT_MASK 0x2 +#define CPLD_FAN3_INFO_BIT_MASK 0x4 +#define CPLD_FAN4_INFO_BIT_MASK 0x8 +#define CPLD_FAN5_INFO_BIT_MASK 0x10 + +#define PROJECT_NAME + +#define LOCAL_DEBUG 0 + +static struct accton_as5812_54t_fan *fan_data = NULL; + +struct accton_as5812_54t_fan { + struct platform_device *pdev; + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 status[FAN_MAX_NUMBER]; /* inner first fan status */ + u32 speed[FAN_MAX_NUMBER]; /* inner first fan speed */ + u8 direction[FAN_MAX_NUMBER]; /* reconrd the direction of inner first and second fans */ + u32 duty_cycle[FAN_MAX_NUMBER]; /* control the speed of inner first and second fans */ + u8 r_status[FAN_MAX_NUMBER]; /* inner second fan status */ + u32 r_speed[FAN_MAX_NUMBER]; /* inner second fan speed */ +}; + +/*******************/ +#define MAKE_FAN_MASK_OR_REG(name,type) \ + CPLD_FAN##type##1_##name, \ + CPLD_FAN##type##2_##name, \ + CPLD_FAN##type##3_##name, \ + CPLD_FAN##type##4_##name, \ + CPLD_FAN##type##5_##name, + +/* fan related data + */ +static const u8 fan_info_mask[] = { + MAKE_FAN_MASK_OR_REG(INFO_BIT_MASK,) +}; + +static const u8 fan_speed_reg[] = { + MAKE_FAN_MASK_OR_REG(REG_SPEED_OFFSET,) +}; + +static const u8 fanr_speed_reg[] = { + MAKE_FAN_MASK_OR_REG(REG_SPEED_OFFSET,R) +}; + +/*******************/ +#define DEF_FAN_SET(id) \ + FAN##id##_FAULT, \ + FAN##id##_SPEED, \ + FAN##id##_DUTY_CYCLE, \ + FAN##id##_DIRECTION, \ + FANR##id##_FAULT, \ + FANR##id##_SPEED, + +enum sysfs_fan_attributes { + DEF_FAN_SET(1) + DEF_FAN_SET(2) + DEF_FAN_SET(3) + DEF_FAN_SET(4) + DEF_FAN_SET(5) +}; +/*******************/ +static void accton_as5812_54t_fan_update_device(struct device *dev); +static int accton_as5812_54t_fan_read_value(u8 reg); +static int accton_as5812_54t_fan_write_value(u8 reg, u8 value); + +static ssize_t fan_set_duty_cycle(struct device *dev, + struct device_attribute *da,const char *buf, size_t count); +static ssize_t fan_show_value(struct device *dev, + struct device_attribute *da, char *buf); + +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + + +/*******************/ +#define _MAKE_SENSOR_DEVICE_ATTR(prj, id) \ + static SENSOR_DEVICE_ATTR(prj##fan##id##_fault, S_IRUGO, fan_show_value, NULL, FAN##id##_FAULT); \ + static SENSOR_DEVICE_ATTR(prj##fan##id##_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##id##_SPEED); \ + static SENSOR_DEVICE_ATTR(prj##fan##id##_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_show_value, \ + fan_set_duty_cycle, FAN##id##_DUTY_CYCLE); \ + static SENSOR_DEVICE_ATTR(prj##fan##id##_direction, S_IRUGO, fan_show_value, NULL, FAN##id##_DIRECTION); \ + static SENSOR_DEVICE_ATTR(prj##fanr##id##_fault, S_IRUGO, fan_show_value, NULL, FANR##id##_FAULT); \ + static SENSOR_DEVICE_ATTR(prj##fanr##id##_speed_rpm, S_IRUGO, fan_show_value, NULL, FANR##id##_SPEED); + +#define MAKE_SENSOR_DEVICE_ATTR(prj,id) _MAKE_SENSOR_DEVICE_ATTR(prj,id) + +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 1) +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 2) +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 3) +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 4) +MAKE_SENSOR_DEVICE_ATTR(PROJECT_NAME, 5) +/*******************/ + +#define _MAKE_FAN_ATTR(prj, id) \ + &sensor_dev_attr_##prj##fan##id##_fault.dev_attr.attr, \ + &sensor_dev_attr_##prj##fan##id##_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_##prj##fan##id##_duty_cycle_percentage.dev_attr.attr,\ + &sensor_dev_attr_##prj##fan##id##_direction.dev_attr.attr, \ + &sensor_dev_attr_##prj##fanr##id##_fault.dev_attr.attr, \ + &sensor_dev_attr_##prj##fanr##id##_speed_rpm.dev_attr.attr, + +#define MAKE_FAN_ATTR(prj, id) _MAKE_FAN_ATTR(prj, id) + +static struct attribute *accton_as5812_54t_fan_attributes[] = { + /* fan related attributes */ + MAKE_FAN_ATTR(PROJECT_NAME,1) + MAKE_FAN_ATTR(PROJECT_NAME,2) + MAKE_FAN_ATTR(PROJECT_NAME,3) + MAKE_FAN_ATTR(PROJECT_NAME,4) + MAKE_FAN_ATTR(PROJECT_NAME,5) + NULL +}; +/*******************/ + +/* fan related functions + */ +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + ssize_t ret = 0; + int data_index, type_index; + + accton_as5812_54t_fan_update_device(dev); + + if (fan_data->valid == 0) { + return ret; + } + + type_index = attr->index%FAN2_FAULT; + data_index = attr->index/FAN2_FAULT; + + switch (type_index) { + case FAN1_FAULT: + ret = sprintf(buf, "%d\n", fan_data->status[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FAN1_SPEED: + ret = sprintf(buf, "%d\n", fan_data->speed[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FAN1_DUTY_CYCLE: + ret = sprintf(buf, "%d\n", fan_data->duty_cycle[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FAN1_DIRECTION: + ret = sprintf(buf, "%d\n", fan_data->direction[data_index]); /* presnet, need to modify*/ + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FANR1_FAULT: + ret = sprintf(buf, "%d\n", fan_data->r_status[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + case FANR1_SPEED: + ret = sprintf(buf, "%d\n", fan_data->r_speed[data_index]); + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d][type->index=%d][data->index=%d]\n", __FUNCTION__, __LINE__, type_index, data_index); + break; + default: + if (LOCAL_DEBUG) + printk ("[Check !!][%s][%d] \n", __FUNCTION__, __LINE__); + break; + } + + return ret; +} +/*******************/ +static ssize_t fan_set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) { + + int error, value; + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < FAN_DUTY_CYCLE_MIN || value > FAN_DUTY_CYCLE_MAX) + return -EINVAL; + + accton_as5812_54t_fan_write_value(CPLD_REG_FAN_PWM_CYCLE_OFFSET, value/FAN_SPEED_PRECENT_TO_CPLD_STEP); + + fan_data->valid = 0; + + return count; +} + +static const struct attribute_group accton_as5812_54t_fan_group = { + .attrs = accton_as5812_54t_fan_attributes, +}; + +static int accton_as5812_54t_fan_read_value(u8 reg) +{ + return accton_i2c_cpld_read(0x60, reg); +} + +static int accton_as5812_54t_fan_write_value(u8 reg, u8 value) +{ + return accton_i2c_cpld_write(0x60, reg, value); +} + +static void accton_as5812_54t_fan_update_device(struct device *dev) +{ + int speed, r_speed, fault, r_fault, ctrl_speed, direction; + int i; + + mutex_lock(&fan_data->update_lock); + + if (LOCAL_DEBUG) + printk ("Starting accton_as5812_54t_fan update \n"); + + if (!(time_after(jiffies, fan_data->last_updated + HZ + HZ / 2) || !fan_data->valid)) { + /* do nothing */ + goto _exit; + } + + fan_data->valid = 0; + + if (LOCAL_DEBUG) + printk ("Starting accton_as5812_54t_fan update 2 \n"); + + fault = accton_as5812_54t_fan_read_value(CPLD_REG_FAN_STATUS_OFFSET); + r_fault = accton_as5812_54t_fan_read_value(CPLD_REG_FANR_STATUS_OFFSET); + direction = accton_as5812_54t_fan_read_value(CPLD_REG_FAN_DIRECTION_OFFSET); + ctrl_speed = accton_as5812_54t_fan_read_value(CPLD_REG_FAN_PWM_CYCLE_OFFSET); + + if ( (fault < 0) || (r_fault < 0) || (direction < 0) || (ctrl_speed < 0) ) + { + if (LOCAL_DEBUG) + printk ("[Error!!][%s][%d] \n", __FUNCTION__, __LINE__); + goto _exit; /* error */ + } + + if (LOCAL_DEBUG) + printk ("[fan:] fault:%d, r_fault=%d, direction=%d, ctrl_speed=%d \n",fault, r_fault, direction, ctrl_speed); + + for (i=0; istatus[i] = (fault & fan_info_mask[i]) >> i; + if (LOCAL_DEBUG) + printk ("[fan%d:] fail=%d \n",i, fan_data->status[i]); + + fan_data->r_status[i] = (r_fault & fan_info_mask[i]) >> i; + fan_data->direction[i] = (direction & fan_info_mask[i]) >> i; + fan_data->duty_cycle[i] = ctrl_speed * FAN_SPEED_PRECENT_TO_CPLD_STEP; + + /* fan speed + */ + speed = accton_as5812_54t_fan_read_value(fan_speed_reg[i]); + r_speed = accton_as5812_54t_fan_read_value(fanr_speed_reg[i]); + if ( (speed < 0) || (r_speed < 0) ) + { + if (LOCAL_DEBUG) + printk ("[Error!!][%s][%d] \n", __FUNCTION__, __LINE__); + goto _exit; /* error */ + } + + if (LOCAL_DEBUG) + printk ("[fan%d:] speed:%d, r_speed=%d \n", i, speed, r_speed); + + fan_data->speed[i] = speed * FAN_SPEED_CPLD_TO_RPM_STEP; + fan_data->r_speed[i] = r_speed * FAN_SPEED_CPLD_TO_RPM_STEP; + } + + /* finish to update */ + fan_data->last_updated = jiffies; + fan_data->valid = 1; + +_exit: + mutex_unlock(&fan_data->update_lock); +} + +static int accton_as5812_54t_fan_probe(struct platform_device *pdev) +{ + int status = -1; + + /* Register sysfs hooks */ + status = sysfs_create_group(&pdev->dev.kobj, &accton_as5812_54t_fan_group); + if (status) { + goto exit; + + } + + fan_data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(fan_data->hwmon_dev)) { + status = PTR_ERR(fan_data->hwmon_dev); + goto exit_remove; + } + + dev_info(&pdev->dev, "accton_as5812_54t_fan\n"); + + return 0; + +exit_remove: + sysfs_remove_group(&pdev->dev.kobj, &accton_as5812_54t_fan_group); +exit: + return status; +} + +static int accton_as5812_54t_fan_remove(struct platform_device *pdev) +{ + hwmon_device_unregister(fan_data->hwmon_dev); + sysfs_remove_group(&fan_data->pdev->dev.kobj, &accton_as5812_54t_fan_group); + + return 0; +} + +#define DRVNAME "as5812_54t_fan" + +static struct platform_driver accton_as5812_54t_fan_driver = { + .probe = accton_as5812_54t_fan_probe, + .remove = accton_as5812_54t_fan_remove, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init accton_as5812_54t_fan_init(void) +{ + int ret; + + extern int platform_accton_as5812_54t(void); + if (!platform_accton_as5812_54t()) { + return -ENODEV; + } + + ret = platform_driver_register(&accton_as5812_54t_fan_driver); + if (ret < 0) { + goto exit; + } + + fan_data = kzalloc(sizeof(struct accton_as5812_54t_fan), GFP_KERNEL); + if (!fan_data) { + ret = -ENOMEM; + platform_driver_unregister(&accton_as5812_54t_fan_driver); + goto exit; + } + + mutex_init(&fan_data->update_lock); + fan_data->valid = 0; + + fan_data->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(fan_data->pdev)) { + ret = PTR_ERR(fan_data->pdev); + platform_driver_unregister(&accton_as5812_54t_fan_driver); + kfree(fan_data); + goto exit; + } + +exit: + return ret; +} + +static void __exit accton_as5812_54t_fan_exit(void) +{ + platform_device_unregister(fan_data->pdev); + platform_driver_unregister(&accton_as5812_54t_fan_driver); + kfree(fan_data); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_as5812_54t_fan driver"); +MODULE_LICENSE("GPL"); + +module_init(accton_as5812_54t_fan_init); +module_exit(accton_as5812_54t_fan_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-leds.c b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-leds.c new file mode 100644 index 000000000000..011f62e76c06 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-leds.c @@ -0,0 +1,601 @@ +/* + * A LED driver for the accton_as5812_54t_led + * + * Copyright (C) 2015 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include + +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +extern void led_classdev_unregister(struct led_classdev *led_cdev); +extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); +extern void led_classdev_resume(struct led_classdev *led_cdev); +extern void led_classdev_suspend(struct led_classdev *led_cdev); + +#define DRVNAME "as5812_54t_led" + +struct accton_as5812_54t_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[4]; /* Register value, 0 = LOC/DIAG/FAN LED + 1 = PSU1/PSU2 LED + 2 = FAN1-4 LED + 3 = FAN5-6 LED */ +}; + +static struct accton_as5812_54t_led_data *ledctl = NULL; + +/* LED related data + */ +#define LED_TYPE_PSU1_REG_MASK 0x03 +#define LED_MODE_PSU1_GREEN_MASK 0x02 +#define LED_MODE_PSU1_AMBER_MASK 0x01 +#define LED_MODE_PSU1_OFF_MASK 0x03 +#define LED_MODE_PSU1_AUTO_MASK 0x00 + +#define LED_TYPE_PSU2_REG_MASK 0x0C +#define LED_MODE_PSU2_GREEN_MASK 0x08 +#define LED_MODE_PSU2_AMBER_MASK 0x04 +#define LED_MODE_PSU2_OFF_MASK 0x0C +#define LED_MODE_PSU2_AUTO_MASK 0x00 + +#define LED_TYPE_DIAG_REG_MASK 0x0C +#define LED_MODE_DIAG_GREEN_MASK 0x08 +#define LED_MODE_DIAG_AMBER_MASK 0x04 +#define LED_MODE_DIAG_OFF_MASK 0x0C + +#define LED_TYPE_FAN_REG_MASK 0x03 +#define LED_MODE_FAN_GREEN_MASK 0x02 +#define LED_MODE_FAN_AMBER_MASK 0x01 +#define LED_MODE_FAN_OFF_MASK 0x03 +#define LED_MODE_FAN_AUTO_MASK 0x00 + +#define LED_TYPE_FAN1_REG_MASK 0x03 +#define LED_TYPE_FAN2_REG_MASK 0x0C +#define LED_TYPE_FAN3_REG_MASK 0x30 +#define LED_TYPE_FAN4_REG_MASK 0xC0 +#define LED_TYPE_FAN5_REG_MASK 0x03 +#define LED_TYPE_FAN6_REG_MASK 0x0C + +#define LED_MODE_FANX_GREEN_MASK 0x01 +#define LED_MODE_FANX_RED_MASK 0x02 +#define LED_MODE_FANX_OFF_MASK 0x00 + +#define LED_TYPE_LOC_REG_MASK 0x30 +#define LED_MODE_LOC_ON_MASK 0x00 +#define LED_MODE_LOC_OFF_MASK 0x10 +#define LED_MODE_LOC_BLINK_MASK 0x20 + +static const u8 led_reg[] = { + 0xA, /* LOC/DIAG/FAN LED*/ + 0xB, /* PSU1/PSU2 LED */ + 0x16, /* FAN1-4 LED */ + 0x17, /* FAN4-6 LED */ +}; + +enum led_type { + LED_TYPE_PSU1, + LED_TYPE_PSU2, + LED_TYPE_DIAG, + LED_TYPE_FAN, + LED_TYPE_FAN1, + LED_TYPE_FAN2, + LED_TYPE_FAN3, + LED_TYPE_FAN4, + LED_TYPE_FAN5, + LED_TYPE_LOC +}; + +enum led_light_mode { + LED_MODE_OFF = 0, + LED_MODE_GREEN, + LED_MODE_GREEN_BLINK, + LED_MODE_AMBER, + LED_MODE_AMBER_BLINK, + LED_MODE_RED, + LED_MODE_RED_BLINK, + LED_MODE_BLUE, + LED_MODE_BLUE_BLINK, + LED_MODE_AUTO, + LED_MODE_UNKNOWN +}; + +struct led_type_mode { + enum led_type type; + int type_mask; + enum led_light_mode mode; + int mode_mask; +}; + +static struct led_type_mode led_type_mode_data[] = { +{LED_TYPE_PSU1, LED_TYPE_PSU1_REG_MASK, LED_MODE_GREEN, LED_MODE_PSU1_GREEN_MASK}, +{LED_TYPE_PSU1, LED_TYPE_PSU1_REG_MASK, LED_MODE_AMBER, LED_MODE_PSU1_AMBER_MASK}, +{LED_TYPE_PSU1, LED_TYPE_PSU1_REG_MASK, LED_MODE_AUTO, LED_MODE_PSU1_AUTO_MASK}, +{LED_TYPE_PSU1, LED_TYPE_PSU1_REG_MASK, LED_MODE_OFF, LED_MODE_PSU1_OFF_MASK}, +{LED_TYPE_PSU2, LED_TYPE_PSU2_REG_MASK, LED_MODE_GREEN, LED_MODE_PSU2_GREEN_MASK}, +{LED_TYPE_PSU2, LED_TYPE_PSU2_REG_MASK, LED_MODE_AMBER, LED_MODE_PSU2_AMBER_MASK}, +{LED_TYPE_PSU2, LED_TYPE_PSU2_REG_MASK, LED_MODE_AUTO, LED_MODE_PSU2_AUTO_MASK}, +{LED_TYPE_PSU2, LED_TYPE_PSU2_REG_MASK, LED_MODE_OFF, LED_MODE_PSU2_OFF_MASK}, +{LED_TYPE_FAN, LED_TYPE_FAN_REG_MASK, LED_MODE_GREEN, LED_MODE_FAN_GREEN_MASK}, +{LED_TYPE_FAN, LED_TYPE_FAN_REG_MASK, LED_MODE_AMBER, LED_MODE_FAN_AMBER_MASK}, +{LED_TYPE_FAN, LED_TYPE_FAN_REG_MASK, LED_MODE_AUTO, LED_MODE_FAN_AUTO_MASK}, +{LED_TYPE_FAN, LED_TYPE_FAN_REG_MASK, LED_MODE_OFF, LED_MODE_FAN_OFF_MASK}, +{LED_TYPE_FAN1, LED_TYPE_FAN1_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 0}, +{LED_TYPE_FAN1, LED_TYPE_FAN1_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 0}, +{LED_TYPE_FAN1, LED_TYPE_FAN1_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 0}, +{LED_TYPE_FAN2, LED_TYPE_FAN2_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 2}, +{LED_TYPE_FAN2, LED_TYPE_FAN2_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 2}, +{LED_TYPE_FAN2, LED_TYPE_FAN2_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 2}, +{LED_TYPE_FAN3, LED_TYPE_FAN3_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 4}, +{LED_TYPE_FAN3, LED_TYPE_FAN3_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 4}, +{LED_TYPE_FAN3, LED_TYPE_FAN3_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 4}, +{LED_TYPE_FAN4, LED_TYPE_FAN4_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 6}, +{LED_TYPE_FAN4, LED_TYPE_FAN4_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 6}, +{LED_TYPE_FAN4, LED_TYPE_FAN4_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 6}, +{LED_TYPE_FAN5, LED_TYPE_FAN5_REG_MASK, LED_MODE_GREEN, LED_MODE_FANX_GREEN_MASK << 0}, +{LED_TYPE_FAN5, LED_TYPE_FAN5_REG_MASK, LED_MODE_RED, LED_MODE_FANX_RED_MASK << 0}, +{LED_TYPE_FAN5, LED_TYPE_FAN5_REG_MASK, LED_MODE_OFF, LED_MODE_FANX_OFF_MASK << 0}, +{LED_TYPE_DIAG, LED_TYPE_DIAG_REG_MASK, LED_MODE_GREEN, LED_MODE_DIAG_GREEN_MASK}, +{LED_TYPE_DIAG, LED_TYPE_DIAG_REG_MASK, LED_MODE_AMBER, LED_MODE_DIAG_AMBER_MASK}, +{LED_TYPE_DIAG, LED_TYPE_DIAG_REG_MASK, LED_MODE_OFF, LED_MODE_DIAG_OFF_MASK}, +{LED_TYPE_LOC, LED_TYPE_LOC_REG_MASK, LED_MODE_AMBER, LED_MODE_LOC_ON_MASK}, +{LED_TYPE_LOC, LED_TYPE_LOC_REG_MASK, LED_MODE_OFF, LED_MODE_LOC_OFF_MASK}, +{LED_TYPE_LOC, LED_TYPE_LOC_REG_MASK, LED_MODE_AMBER_BLINK, LED_MODE_LOC_BLINK_MASK} +}; + + +struct fanx_info_s { + u8 cname; /* device name */ + enum led_type type; + u8 reg_id; /* map to led_reg & reg_val */ +}; + +static struct fanx_info_s fanx_info[] = { + {'1', LED_TYPE_FAN1, 2}, + {'2', LED_TYPE_FAN2, 2}, + {'3', LED_TYPE_FAN3, 2}, + {'4', LED_TYPE_FAN4, 2}, + {'5', LED_TYPE_FAN5, 3} +}; + +static int led_reg_val_to_light_mode(enum led_type type, u8 reg_val) { + int i; + + for (i = 0; i < ARRAY_SIZE(led_type_mode_data); i++) { + + if (type != led_type_mode_data[i].type) + continue; + + if ((led_type_mode_data[i].type_mask & reg_val) == + led_type_mode_data[i].mode_mask) + { + return led_type_mode_data[i].mode; + } + } + + return LED_MODE_UNKNOWN; +} + +static u8 led_light_mode_to_reg_val(enum led_type type, + enum led_light_mode mode, u8 reg_val) { + int i; + + for (i = 0; i < ARRAY_SIZE(led_type_mode_data); i++) { + if (type != led_type_mode_data[i].type) + continue; + + if (mode != led_type_mode_data[i].mode) + continue; + + reg_val = led_type_mode_data[i].mode_mask | + (reg_val & (~led_type_mode_data[i].type_mask)); + } + + return reg_val; +} + +static int accton_as5812_54t_led_read_value(u8 reg) +{ + return accton_i2c_cpld_read(0x60, reg); +} + +static int accton_as5812_54t_led_write_value(u8 reg, u8 value) +{ + return accton_i2c_cpld_write(0x60, reg, value); +} + +static void accton_as5812_54t_led_update(void) +{ + mutex_lock(&ledctl->update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting accton_as5812_54t_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = accton_as5812_54t_led_read_value(led_reg[i]); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg[i], status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void accton_as5812_54t_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + u8 reg, enum led_type type) +{ + int reg_val; + + mutex_lock(&ledctl->update_lock); + + reg_val = accton_as5812_54t_led_read_value(reg); + + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + accton_as5812_54t_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void accton_as5812_54t_led_psu_1_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5812_54t_led_set(led_cdev, led_light_mode, led_reg[1], LED_TYPE_PSU1); +} + +static enum led_brightness accton_as5812_54t_led_psu_1_get(struct led_classdev *cdev) +{ + accton_as5812_54t_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_PSU1, ledctl->reg_val[1]); +} + +static void accton_as5812_54t_led_psu_2_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5812_54t_led_set(led_cdev, led_light_mode, led_reg[1], LED_TYPE_PSU2); +} + +static enum led_brightness accton_as5812_54t_led_psu_2_get(struct led_classdev *cdev) +{ + accton_as5812_54t_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_PSU2, ledctl->reg_val[1]); +} + +static void accton_as5812_54t_led_fan_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5812_54t_led_set(led_cdev, led_light_mode, led_reg[0], LED_TYPE_FAN); +} + +static enum led_brightness accton_as5812_54t_led_fan_get(struct led_classdev *cdev) +{ + accton_as5812_54t_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_FAN, ledctl->reg_val[0]); +} + + +static void accton_as5812_54t_led_fanx_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + enum led_type led_type1; + int reg_id; + int i, nsize; + int ncount = sizeof(fanx_info)/sizeof(struct fanx_info_s); + + for(i=0;iname); + + if (led_cdev->name[nsize-1] == fanx_info[i].cname) + { + led_type1 = fanx_info[i].type; + reg_id = fanx_info[i].reg_id; + accton_as5812_54t_led_set(led_cdev, led_light_mode, led_reg[reg_id], led_type1); + return; + } + } +} + + +static enum led_brightness accton_as5812_54t_led_fanx_get(struct led_classdev *cdev) +{ + enum led_type led_type1; + int reg_id; + int i, nsize; + int ncount = sizeof(fanx_info)/sizeof(struct fanx_info_s); + + for(i=0;iname); + + if (cdev->name[nsize-1] == fanx_info[i].cname) + { + led_type1 = fanx_info[i].type; + reg_id = fanx_info[i].reg_id; + accton_as5812_54t_led_update(); + return led_reg_val_to_light_mode(led_type1, ledctl->reg_val[reg_id]); + } + } + + + return led_reg_val_to_light_mode(LED_TYPE_FAN1, ledctl->reg_val[2]); +} + + +static void accton_as5812_54t_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5812_54t_led_set(led_cdev, led_light_mode, led_reg[0], LED_TYPE_DIAG); +} + +static enum led_brightness accton_as5812_54t_led_diag_get(struct led_classdev *cdev) +{ + accton_as5812_54t_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void accton_as5812_54t_led_loc_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as5812_54t_led_set(led_cdev, led_light_mode, led_reg[0], LED_TYPE_LOC); +} + +static enum led_brightness accton_as5812_54t_led_loc_get(struct led_classdev *cdev) +{ + accton_as5812_54t_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_LOC, ledctl->reg_val[0]); +} + +static struct led_classdev accton_as5812_54t_leds[] = { + [LED_TYPE_PSU1] = { + .name = "accton_as5812_54t_led::psu1", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_psu_1_set, + .brightness_get = accton_as5812_54t_led_psu_1_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU2] = { + .name = "accton_as5812_54t_led::psu2", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_psu_2_set, + .brightness_get = accton_as5812_54t_led_psu_2_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN] = { + .name = "accton_as5812_54t_led::fan", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_fan_set, + .brightness_get = accton_as5812_54t_led_fan_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN1] = { + .name = "accton_as5812_54t_led::fan1", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_fanx_set, + .brightness_get = accton_as5812_54t_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN2] = { + .name = "accton_as5812_54t_led::fan2", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_fanx_set, + .brightness_get = accton_as5812_54t_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN3] = { + .name = "accton_as5812_54t_led::fan3", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_fanx_set, + .brightness_get = accton_as5812_54t_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN4] = { + .name = "accton_as5812_54t_led::fan4", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_fanx_set, + .brightness_get = accton_as5812_54t_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_FAN5] = { + .name = "accton_as5812_54t_led::fan5", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_fanx_set, + .brightness_get = accton_as5812_54t_led_fanx_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_DIAG] = { + .name = "accton_as5812_54t_led::diag", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_diag_set, + .brightness_get = accton_as5812_54t_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_LOC] = { + .name = "accton_as5812_54t_led::loc", + .default_trigger = "unused", + .brightness_set = accton_as5812_54t_led_loc_set, + .brightness_get = accton_as5812_54t_led_loc_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, +}; + +static int accton_as5812_54t_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as5812_54t_leds); i++) { + led_classdev_suspend(&accton_as5812_54t_leds[i]); + } + + return 0; +} + +static int accton_as5812_54t_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as5812_54t_leds); i++) { + led_classdev_resume(&accton_as5812_54t_leds[i]); + } + + return 0; +} + +static int accton_as5812_54t_led_probe(struct platform_device *pdev) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(accton_as5812_54t_leds); i++) { + ret = led_classdev_register(&pdev->dev, &accton_as5812_54t_leds[i]); + + if (ret < 0) + break; + } + + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(accton_as5812_54t_leds)){ + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&accton_as5812_54t_leds[i]); + } + } + + return ret; +} + +static int accton_as5812_54t_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(accton_as5812_54t_leds); i++) { + led_classdev_unregister(&accton_as5812_54t_leds[i]); + } + + return 0; +} + +static struct platform_driver accton_as5812_54t_led_driver = { + .probe = accton_as5812_54t_led_probe, + .remove = accton_as5812_54t_led_remove, + .suspend = accton_as5812_54t_led_suspend, + .resume = accton_as5812_54t_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init accton_as5812_54t_led_init(void) +{ + int ret; + + extern int platform_accton_as5812_54t(void); + if (!platform_accton_as5812_54t()) { + return -ENODEV; + } + + ret = platform_driver_register(&accton_as5812_54t_led_driver); + if (ret < 0) { + goto exit; + } + + ledctl = kzalloc(sizeof(struct accton_as5812_54t_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&accton_as5812_54t_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&accton_as5812_54t_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return ret; +} + +static void __exit accton_as5812_54t_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&accton_as5812_54t_led_driver); + kfree(ledctl); +} + +module_init(accton_as5812_54t_led_init); +module_exit(accton_as5812_54t_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_as5812_54t_led driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-psu.c b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-psu.c new file mode 100644 index 000000000000..a77014e877ca --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-psu.c @@ -0,0 +1,372 @@ +/* + * An hwmon driver for accton as5812_54t Power Module + * + * Copyright (C) 2015 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define PSU_STATUS_I2C_ADDR 0x60 +#define PSU_STATUS_I2C_REG_OFFSET 0x2 + +#define IS_POWER_GOOD(id, value) (!!(value & BIT(id*4 + 1))) +#define IS_PRESENT(id, value) (!(value & BIT(id*4))) + +static ssize_t show_index(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, char *buf); +static int as5812_54t_psu_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +static int as5812_54t_psu_model_name_get(struct device *dev); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as5812_54t_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ + char model_name[14]; /* Model name, read from eeprom */ +}; + +static struct as5812_54t_psu_data *as5812_54t_psu_update_device(struct device *dev); + +enum as5812_54t_psu_sysfs_attributes { + PSU_INDEX, + PSU_PRESENT, + PSU_MODEL_NAME, + PSU_POWER_GOOD +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_index, S_IRUGO, show_index, NULL, PSU_INDEX); +static SENSOR_DEVICE_ATTR(psu_present, S_IRUGO, show_status, NULL, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_model_name, S_IRUGO, show_model_name,NULL, PSU_MODEL_NAME); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_status, NULL, PSU_POWER_GOOD); + +static struct attribute *as5812_54t_psu_attributes[] = { + &sensor_dev_attr_psu_index.dev_attr.attr, + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_model_name.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + NULL +}; + +static ssize_t show_index(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5812_54t_psu_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d\n", data->index); +} + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as5812_54t_psu_data *data = as5812_54t_psu_update_device(dev); + u8 status = 0; + + if (!data->valid) { + return sprintf(buf, "0\n"); + } + + if (attr->index == PSU_PRESENT) { + status = IS_PRESENT(data->index, data->status); + } + else { /* PSU_POWER_GOOD */ + status = IS_POWER_GOOD(data->index, data->status); + } + + return sprintf(buf, "%d\n", status); +} + +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as5812_54t_psu_data *data = as5812_54t_psu_update_device(dev); + + if (!data->valid) { + return 0; + } + + if (!IS_PRESENT(data->index, data->status)) { + return 0; + } + + if (as5812_54t_psu_model_name_get(dev) < 0) { + return -ENXIO; + } + + return sprintf(buf, "%s\n", data->model_name); +} + +static const struct attribute_group as5812_54t_psu_group = { + .attrs = as5812_54t_psu_attributes, +}; + +static int as5812_54t_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as5812_54t_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as5812_54t_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as5812_54t_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as5812_54t_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as5812_54t_psu_remove(struct i2c_client *client) +{ + struct as5812_54t_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as5812_54t_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as5812_54t_psu1, + as5812_54t_psu2 +}; + +static const struct i2c_device_id as5812_54t_psu_id[] = { + { "as5812_54t_psu1", as5812_54t_psu1 }, + { "as5812_54t_psu2", as5812_54t_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as5812_54t_psu_id); + +static struct i2c_driver as5812_54t_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as5812_54t_psu", + }, + .probe = as5812_54t_psu_probe, + .remove = as5812_54t_psu_remove, + .id_table = as5812_54t_psu_id, + .address_list = normal_i2c, +}; + +static int as5812_54t_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) + goto abort; + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + + result = 0; + +abort: + return result; +} + +enum psu_type { + PSU_YM_2401_JCR, /* AC110V - F2B */ + PSU_YM_2401_JDR, /* AC110V - B2F */ + PSU_CPR_4011_4M11, /* AC110V - F2B */ + PSU_CPR_4011_4M21, /* AC110V - B2F */ + PSU_CPR_6011_2M11, /* AC110V - F2B */ + PSU_CPR_6011_2M21, /* AC110V - B2F */ + PSU_UM400D_01G, /* DC48V - F2B */ + PSU_UM400D01_01G /* DC48V - B2F */ +}; + +struct model_name_info { + enum psu_type type; + u8 offset; + u8 length; + char* model_name; +}; + +struct model_name_info models[] = { +{PSU_YM_2401_JCR, 0x20, 11, "YM-2401JCR"}, +{PSU_YM_2401_JDR, 0x20, 11, "YM-2401JDR"}, +{PSU_CPR_4011_4M11, 0x26, 13, "CPR-4011-4M11"}, +{PSU_CPR_4011_4M21, 0x26, 13, "CPR-4011-4M21"}, +{PSU_CPR_6011_2M11, 0x26, 13, "CPR-6011-2M11"}, +{PSU_CPR_6011_2M21, 0x26, 13, "CPR-6011-2M21"}, +{PSU_UM400D_01G, 0x50, 9, "um400d01G"}, +{PSU_UM400D01_01G, 0x50, 12, "um400d01-01G"}, +}; + +static int as5812_54t_psu_model_name_get(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5812_54t_psu_data *data = i2c_get_clientdata(client); + int i, status; + + for (i = 0; i < ARRAY_SIZE(models); i++) { + memset(data->model_name, 0, sizeof(data->model_name)); + + status = as5812_54t_psu_read_block(client, models[i].offset, + data->model_name, models[i].length); + if (status < 0) { + data->model_name[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x) offset(0x%x)\n", + client->addr, models[i].offset); + return status; + } + else { + data->model_name[models[i].length] = '\0'; + } + + if (i == PSU_YM_2401_JCR || i == PSU_YM_2401_JDR) { + /* Skip the meaningless data byte 8*/ + data->model_name[8] = data->model_name[9]; + data->model_name[9] = data->model_name[10]; + data->model_name[10] = '\0'; + } + + /* Determine if the model name is known, if not, read next index + */ + if (strncmp(data->model_name, models[i].model_name, models[i].length) == 0) { + return 0; + } + else { + data->model_name[0] = '\0'; + } + } + + return -ENODATA; +} + +static struct as5812_54t_psu_data *as5812_54t_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5812_54t_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status = -1; + + dev_dbg(&client->dev, "Starting as5812_54t update\n"); + data->valid = 0; + + /* Read psu status */ + status = accton_i2c_cpld_read(PSU_STATUS_I2C_ADDR, PSU_STATUS_I2C_REG_OFFSET); + + if (status < 0) { + dev_dbg(&client->dev, "cpld reg (0x%x) err %d\n", PSU_STATUS_I2C_ADDR, status); + goto exit; + } + else { + data->status = status; + } + + data->last_updated = jiffies; + data->valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init as5812_54t_psu_init(void) +{ + extern int platform_accton_as5812_54t(void); + if (!platform_accton_as5812_54t()) { + return -ENODEV; + } + + return i2c_add_driver(&as5812_54t_psu_driver); +} + +static void __exit as5812_54t_psu_exit(void) +{ + i2c_del_driver(&as5812_54t_psu_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton as5812_54t_psu driver"); +MODULE_LICENSE("GPL"); + +module_init(as5812_54t_psu_init); +module_exit(as5812_54t_psu_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-sfp.c b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-sfp.c new file mode 100644 index 000000000000..88bf552de0f0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/x86-64-accton-as5812-54t-sfp.c @@ -0,0 +1,318 @@ +/* + * An hwmon driver for accton as5812_54t sfp + * + * Copyright (C) 2015 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define QSFP_PORT_START_INDEX 49 +#define BIT_INDEX(i) (1ULL << (i)) + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as5812_54t_sfp_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + int port; /* Front port index */ + char eeprom[256]; /* eeprom data */ + u8 status; /* bit0:port49, bit1:port50 and so on */ +}; + +static struct as5812_54t_sfp_data *as5812_54t_sfp_update_device(struct device *dev, int update_eeprom); +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_eeprom(struct device *dev, struct device_attribute *da, char *buf); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +enum as5812_54t_sfp_sysfs_attributes { + SFP_IS_PRESENT, + SFP_PORT_NUMBER, + SFP_EEPROM, + SFP_IS_PRESENT_ALL, +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(sfp_is_present, S_IRUGO, show_status, NULL, SFP_IS_PRESENT); +static SENSOR_DEVICE_ATTR(sfp_port_number, S_IRUGO, show_port_number, NULL, SFP_PORT_NUMBER); +static SENSOR_DEVICE_ATTR(sfp_eeprom, S_IRUGO, show_eeprom, NULL, SFP_EEPROM); +static SENSOR_DEVICE_ATTR(sfp_is_present_all, S_IRUGO, show_status,NULL, SFP_IS_PRESENT_ALL); + +static struct attribute *as5812_54t_sfp_attributes[] = { + &sensor_dev_attr_sfp_is_present.dev_attr.attr, + &sensor_dev_attr_sfp_eeprom.dev_attr.attr, + &sensor_dev_attr_sfp_port_number.dev_attr.attr, + &sensor_dev_attr_sfp_is_present_all.dev_attr.attr, + NULL +}; + +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5812_54t_sfp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d\n",data->port); +} + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as5812_54t_sfp_data *data = as5812_54t_sfp_update_device(dev, 0); + + if (attr->index == SFP_IS_PRESENT) { + u8 val; + + val = (data->status & BIT_INDEX(data->port - QSFP_PORT_START_INDEX)) ? 0 : 1; + return sprintf(buf, "%d", val); + } + else { /* SFP_IS_PRESENT_ALL */ + return sprintf(buf, "%.2x\n", ~data->status); + } +} + +static ssize_t show_eeprom(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as5812_54t_sfp_data *data = as5812_54t_sfp_update_device(dev, 1); + + if (!data->valid) { + return 0; + } + + if ((data->status & BIT_INDEX(data->port - QSFP_PORT_START_INDEX)) != 0) { + return 0; + } + + memcpy(buf, data->eeprom, sizeof(data->eeprom)); + + return sizeof(data->eeprom); +} + +static const struct attribute_group as5812_54t_sfp_group = { + .attrs = as5812_54t_sfp_attributes, +}; + +static int as5812_54t_sfp_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as5812_54t_sfp_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as5812_54t_sfp_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + mutex_init(&data->update_lock); + data->port = dev_id->driver_data; + i2c_set_clientdata(client, data); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as5812_54t_sfp_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: sfp '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as5812_54t_sfp_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as5812_54t_sfp_remove(struct i2c_client *client) +{ + struct as5812_54t_sfp_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as5812_54t_sfp_group); + kfree(data); + + return 0; +} + +enum port_numbers { +as5812_54t_qsfp49 = 49, +as5812_54t_qsfp50, +as5812_54t_qsfp51, +as5812_54t_qsfp52, +as5812_54t_qsfp53, +as5812_54t_qsfp54 +}; + +static const struct i2c_device_id as5812_54t_sfp_id[] = { +{ "as5812_54t_qsfp49", as5812_54t_qsfp49 }, { "as5812_54t_qsfp50", as5812_54t_qsfp50 }, +{ "as5812_54t_qsfp51", as5812_54t_qsfp51 }, { "as5812_54t_qsfp52", as5812_54t_qsfp52 }, +{ "as5812_54t_qsfp53", as5812_54t_qsfp53 }, { "as5812_54t_qsfp54", as5812_54t_qsfp54 }, +{} +}; +MODULE_DEVICE_TABLE(i2c, as5812_54t_sfp_id); + +static struct i2c_driver as5812_54t_sfp_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as5812_54t_sfp", + }, + .probe = as5812_54t_sfp_probe, + .remove = as5812_54t_sfp_remove, + .id_table = as5812_54t_sfp_id, + .address_list = normal_i2c, +}; + +static int as5812_54t_sfp_read_byte(struct i2c_client *client, u8 command, u8 *data) +{ + int result = i2c_smbus_read_byte_data(client, command); + + if (unlikely(result < 0)) { + dev_dbg(&client->dev, "sfp read byte data failed, command(0x%2x), data(0x%2x)\r\n", command, result); + goto abort; + } + + *data = (u8)result; + result = 0; + +abort: + return result; +} + +static struct as5812_54t_sfp_data *as5812_54t_sfp_update_device(struct device *dev, int update_eeprom) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as5812_54t_sfp_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid || update_eeprom) { + int status = -1; + int i = 0; + + data->valid = 0; + //dev_dbg(&client->dev, "Starting as5812_54t sfp status update\n"); + data->status = 0xFF; + + /* + * Bring QSFPs out of reset, + * This is a temporary fix until the QSFP+_MOD_RST register + * can be exposed through the driver. + */ + accton_i2c_cpld_write(0x60, 0x23, 0x3F); + + /* Read present status of port 49-54(QSFP port) */ + status = accton_i2c_cpld_read(0x60, 0x22); + + if (status < 0) { + dev_dbg(&client->dev, "cpld(0x60) reg(0x22) err %d\n", status); + } + else { + data->status = status & 0x3F; /* (u32)status */ + } + + if (update_eeprom) { + /* Read eeprom data based on port number */ + memset(data->eeprom, 0, sizeof(data->eeprom)); + + /* Check if the port is present */ + if ((data->status & BIT_INDEX(data->port - QSFP_PORT_START_INDEX)) == 0) { + /* read eeprom */ + for (i = 0; i < sizeof(data->eeprom); i++) { + status = as5812_54t_sfp_read_byte(client, i, data->eeprom + i); + + if (status < 0) { + dev_dbg(&client->dev, "unable to read eeprom from port(%d)\n", + data->port); + goto exit; + } + } + } + } + + data->valid = 1; + data->last_updated = jiffies; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init as5812_54t_sfp_init(void) +{ + extern int platform_accton_as5812_54t(void); + if (!platform_accton_as5812_54t()) { + return -ENODEV; + } + + return i2c_add_driver(&as5812_54t_sfp_driver); +} + +static void __exit as5812_54t_sfp_exit(void) +{ + i2c_del_driver(&as5812_54t_sfp_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton as5812_54t_sfp driver"); +MODULE_LICENSE("GPL"); + +module_init(as5812_54t_sfp_init); +module_exit(as5812_54t_sfp_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/ym2651y.c new file mode 100644 index 000000000000..7101aa411f72 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/modules/ym2651y.c @@ -0,0 +1,680 @@ +/* + * An hwmon driver for the 3Y Power YM-2651Y Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_FAN_DUTY_CYCLE 100 + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +enum chips { + YM2651, + YM2401, +}; + +/* Each client has this additional data + */ +struct ym2651y_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 chip; /* chip id */ + u8 capability; /* Register value */ + u16 status_word; /* Register value */ + u8 fan_fault; /* Register value */ + u8 over_temp; /* Register value */ + u16 v_out; /* Register value */ + u16 i_out; /* Register value */ + u16 p_out; /* Register value */ + u8 vout_mode; /* Register value */ + u16 temp; /* Register value */ + u16 fan_speed; /* Register value */ + u16 fan_duty_cycle[2]; /* Register value */ + u8 fan_dir[5]; /* Register value */ + u8 pmbus_revision; /* Register value */ + u8 mfr_id[10]; /* Register value */ + u8 mfr_model[16]; /* Register value */ + u8 mfr_revsion[3]; /* Register value */ + u16 mfr_vin_min; /* Register value */ + u16 mfr_vin_max; /* Register value */ + u16 mfr_iin_max; /* Register value */ + u16 mfr_iout_max; /* Register value */ + u16 mfr_pin_max; /* Register value */ + u16 mfr_pout_max; /* Register value */ + u16 mfr_vout_min; /* Register value */ + u16 mfr_vout_max; /* Register value */ +}; + +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_word(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_vout(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf); +static struct ym2651y_data *ym2651y_update_device(struct device *dev); +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value); + +enum ym2651y_sysfs_attributes { + PSU_POWER_ON = 0, + PSU_TEMP_FAULT, + PSU_POWER_GOOD, + PSU_FAN1_FAULT, + PSU_FAN_DIRECTION, + PSU_OVER_TEMP, + PSU_V_OUT, + PSU_I_OUT, + PSU_P_OUT, + PSU_TEMP1_INPUT, + PSU_FAN1_SPEED, + PSU_FAN1_DUTY_CYCLE, + PSU_PMBUS_REVISION, + PSU_MFR_ID, + PSU_MFR_MODEL, + PSU_MFR_REVISION, + PSU_MFR_VIN_MIN, + PSU_MFR_VIN_MAX, + PSU_MFR_VOUT_MIN, + PSU_MFR_VOUT_MAX, + PSU_MFR_IIN_MAX, + PSU_MFR_IOUT_MAX, + PSU_MFR_PIN_MAX, + PSU_MFR_POUT_MAX +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_power_on, S_IRUGO, show_word, NULL, PSU_POWER_ON); +static SENSOR_DEVICE_ATTR(psu_temp_fault, S_IRUGO, show_word, NULL, PSU_TEMP_FAULT); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_word, NULL, PSU_POWER_GOOD); +static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IRUGO, show_fan_fault, NULL, PSU_FAN1_FAULT); +static SENSOR_DEVICE_ATTR(psu_over_temp, S_IRUGO, show_over_temp, NULL, PSU_OVER_TEMP); +static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, show_vout, NULL, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, show_linear, NULL, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, show_linear, NULL, PSU_P_OUT); +static SENSOR_DEVICE_ATTR(psu_temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); +static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, show_linear, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE); +static SENSOR_DEVICE_ATTR(psu_fan_dir, S_IRUGO, show_ascii, NULL, PSU_FAN_DIRECTION); +static SENSOR_DEVICE_ATTR(psu_pmbus_revision,S_IRUGO, show_byte, NULL, PSU_PMBUS_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_id, S_IRUGO, show_ascii, NULL, PSU_MFR_ID); +static SENSOR_DEVICE_ATTR(psu_mfr_model, S_IRUGO, show_ascii, NULL, PSU_MFR_MODEL); +static SENSOR_DEVICE_ATTR(psu_mfr_revision, S_IRUGO, show_ascii, NULL, PSU_MFR_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_min, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_max, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_min, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_max, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iin_max, S_IRUGO, show_linear, NULL, PSU_MFR_IIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iout_max, S_IRUGO, show_linear, NULL, PSU_MFR_IOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pin_max, S_IRUGO, show_linear, NULL, PSU_MFR_PIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pout_max, S_IRUGO, show_linear, NULL, PSU_MFR_POUT_MAX); + +static struct attribute *ym2651y_attributes[] = { + &sensor_dev_attr_psu_power_on.dev_attr.attr, + &sensor_dev_attr_psu_temp_fault.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, + &sensor_dev_attr_psu_over_temp.dev_attr.attr, + &sensor_dev_attr_psu_v_out.dev_attr.attr, + &sensor_dev_attr_psu_i_out.dev_attr.attr, + &sensor_dev_attr_psu_p_out.dev_attr.attr, + &sensor_dev_attr_psu_temp1_input.dev_attr.attr, + &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, + &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, + &sensor_dev_attr_psu_fan_dir.dev_attr.attr, + &sensor_dev_attr_psu_pmbus_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_id.dev_attr.attr, + &sensor_dev_attr_psu_mfr_model.dev_attr.attr, + &sensor_dev_attr_psu_mfr_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iout_max.dev_attr.attr, + NULL +}; + +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + if (!data->valid) { + return 0; + } + + return (attr->index == PSU_PMBUS_REVISION) ? sprintf(buf, "%d\n", data->pmbus_revision) : + sprintf(buf, "0\n"); +} + +static ssize_t show_word(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u16 status = 0; + + if (!data->valid) { + return 0; + } + + switch (attr->index) { + case PSU_POWER_ON: /* psu_power_on, low byte bit 6 of status_word, 0=>ON, 1=>OFF */ + status = (data->status_word & 0x40) ? 0 : 1; + break; + case PSU_TEMP_FAULT: /* psu_temp_fault, low byte bit 2 of status_word, 0=>Normal, 1=>temp fault */ + status = (data->status_word & 0x4) >> 2; + break; + case PSU_POWER_GOOD: /* psu_power_good, high byte bit 3 of status_word, 0=>OK, 1=>FAIL */ + status = (data->status_word & 0x800) ? 0 : 1; + break; + } + + return sprintf(buf, "%d\n", status); +} + +static int two_complement_to_int(u16 data, u8 valid_bit, int mask) +{ + u16 valid_data = data & mask; + bool is_negative = valid_data >> (valid_bit - 1); + + return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data; +} + +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1; + long speed; + int error; + + error = kstrtol(buf, 10, &speed); + if (error) + return error; + + if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->fan_duty_cycle[nr] = speed; + ym2651y_write_word(client, 0x3B + nr, data->fan_duty_cycle[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + u16 value = 0; + int exponent, mantissa; + int multiplier = 1000; + + if (!data->valid) { + return 0; + } + + switch (attr->index) { + case PSU_V_OUT: + value = data->v_out; + break; + case PSU_I_OUT: + value = data->i_out; + break; + case PSU_P_OUT: + value = data->p_out; + break; + case PSU_TEMP1_INPUT: + value = data->temp; + break; + case PSU_FAN1_SPEED: + value = data->fan_speed; + multiplier = 1; + break; + case PSU_FAN1_DUTY_CYCLE: + value = data->fan_duty_cycle[0]; + multiplier = 1; + break; + case PSU_MFR_VIN_MIN: + value = data->mfr_vin_min; + break; + case PSU_MFR_VIN_MAX: + value = data->mfr_vin_max; + break; + case PSU_MFR_VOUT_MIN: + value = data->mfr_vout_min; + break; + case PSU_MFR_VOUT_MAX: + value = data->mfr_vout_max; + break; + case PSU_MFR_PIN_MAX: + value = data->mfr_pin_max; + break; + case PSU_MFR_POUT_MAX: + value = data->mfr_pout_max; + break; + case PSU_MFR_IOUT_MAX: + value = data->mfr_iout_max; + break; + case PSU_MFR_IIN_MAX: + value = data->mfr_iin_max; + break; + } + + exponent = two_complement_to_int(value >> 11, 5, 0x1f); + mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff); + + return (exponent >= 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u8 shift; + + if (!data->valid) { + return 0; + } + + shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6; + + return sprintf(buf, "%d\n", data->fan_fault >> shift); +} + +static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct ym2651y_data *data = ym2651y_update_device(dev); + + if (!data->valid) { + return 0; + } + + return sprintf(buf, "%d\n", data->over_temp >> 7); +} + +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u8 *ptr = NULL; + + if (!data->valid) { + return 0; + } + + switch (attr->index) { + case PSU_FAN_DIRECTION: /* psu_fan_dir */ + ptr = data->fan_dir + 1; /* Skip the first byte since it is the length of string. */ + break; + case PSU_MFR_ID: /* psu_mfr_id */ + ptr = data->mfr_id + 1; /* The first byte is the count byte of string. */; + break; + case PSU_MFR_MODEL: /* psu_mfr_model */ + ptr = data->mfr_model + 1; /* The first byte is the count byte of string. */ + break; + case PSU_MFR_REVISION: /* psu_mfr_revision */ + ptr = data->mfr_revsion + 1; /* The first byte is the count byte of string. */ + break; + default: + return 0; + } + + return sprintf(buf, "%s\n", ptr); +} + +static ssize_t show_vout_by_mode(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct ym2651y_data *data = ym2651y_update_device(dev); + int exponent, mantissa; + int multiplier = 1000; + + if (!data->valid) { + return 0; + } + + exponent = two_complement_to_int(data->vout_mode, 5, 0x1f); + mantissa = data->v_out; + + return (exponent > 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_vout(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + + if (data->chip == YM2401) { + return show_vout_by_mode(dev, da, buf); + } + + return show_linear(dev, da, buf); +} + +static const struct attribute_group ym2651y_group = { + .attrs = ym2651y_attributes, +}; + +static int ym2651y_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct ym2651y_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct ym2651y_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->chip = dev_id->driver_data; + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &ym2651y_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &ym2651y_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int ym2651y_remove(struct i2c_client *client) +{ + struct ym2651y_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &ym2651y_group); + kfree(data); + + return 0; +} + +static const struct i2c_device_id ym2651y_id[] = { + { "ym2651", YM2651 }, + { "ym2401", YM2401 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ym2651y_id); + +static struct i2c_driver ym2651y_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ym2651", + }, + .probe = ym2651y_probe, + .remove = ym2651y_remove, + .id_table = ym2651y_id, + .address_list = normal_i2c, +}; + +static int ym2651y_read_byte(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int ym2651y_read_word(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_data(client, reg); +} + +static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value) +{ + return i2c_smbus_write_word_data(client, reg, value); +} + +static int ym2651y_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) + goto abort; + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + + result = 0; + +abort: + return result; +} + +struct reg_data_byte { + u8 reg; + u8 *value; +}; + +struct reg_data_word { + u8 reg; + u16 *value; +}; + +static struct ym2651y_data *ym2651y_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i, status, length; + u8 command, buf; + struct reg_data_byte regs_byte[] = { {0x19, &data->capability}, + {0x20, &data->vout_mode}, + {0x7d, &data->over_temp}, + {0x81, &data->fan_fault}, + {0x98, &data->pmbus_revision}}; + struct reg_data_word regs_word[] = { {0x79, &data->status_word}, + {0x8b, &data->v_out}, + {0x8c, &data->i_out}, + {0x96, &data->p_out}, + {0x8d, &data->temp}, + {0x3b, &(data->fan_duty_cycle[0])}, + {0x3c, &(data->fan_duty_cycle[1])}, + {0x90, &data->fan_speed}, + {0xa0, &data->mfr_vin_min}, + {0xa1, &data->mfr_vin_max}, + {0xa2, &data->mfr_iin_max}, + {0xa3, &data->mfr_pin_max}, + {0xa4, &data->mfr_vout_min}, + {0xa5, &data->mfr_vout_max}, + {0xa6, &data->mfr_iout_max}, + {0xa7, &data->mfr_pout_max}}; + + dev_dbg(&client->dev, "Starting ym2651 update\n"); + data->valid = 0; + + /* Read byte data */ + for (i = 0; i < ARRAY_SIZE(regs_byte); i++) { + status = ym2651y_read_byte(client, regs_byte[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_byte[i].reg, status); + goto exit; + } + else { + *(regs_byte[i].value) = status; + } + } + + /* Read word data */ + for (i = 0; i < ARRAY_SIZE(regs_word); i++) { + status = ym2651y_read_word(client, regs_word[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_word[i].reg, status); + goto exit; + } + else { + *(regs_word[i].value) = status; + } + } + + /* Read fan_direction */ + command = 0xC3; + status = ym2651y_read_block(client, command, data->fan_dir, + ARRAY_SIZE(data->fan_dir)-1); + data->fan_dir[ARRAY_SIZE(data->fan_dir)-1] = '\0'; + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + /* Read mfr_id */ + command = 0x99; + status = ym2651y_read_block(client, command, data->mfr_id, + ARRAY_SIZE(data->mfr_id)-1); + data->mfr_id[ARRAY_SIZE(data->mfr_id)-1] = '\0'; + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + /* Read mfr_model */ + command = 0x9a; + length = 1; + + /* Read first byte to determine the length of data */ + status = ym2651y_read_block(client, command, &buf, length); + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + status = ym2651y_read_block(client, command, data->mfr_model, buf+1); + data->mfr_model[buf+1] = '\0'; + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + /* Read mfr_revsion */ + command = 0x9b; + status = ym2651y_read_block(client, command, data->mfr_revsion, + ARRAY_SIZE(data->mfr_revsion)-1); + data->mfr_revsion[ARRAY_SIZE(data->mfr_revsion)-1] = '\0'; + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + goto exit; + } + + data->last_updated = jiffies; + data->valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init ym2651y_init(void) +{ + return i2c_add_driver(&ym2651y_driver); +} + +static void __exit ym2651y_exit(void) +{ + i2c_del_driver(&ym2651y_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("3Y Power YM-2651Y driver"); +MODULE_LICENSE("GPL"); + +module_init(ym2651y_init); +module_exit(ym2651y_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/service/as5812-platform-init.service b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/service/as5812-platform-init.service new file mode 100755 index 000000000000..30c1703dc40f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/service/as5812-platform-init.service @@ -0,0 +1,13 @@ +[Unit] +Description=Accton AS5712-54T Platform initialization service +Before=pmon.service +DefaultDependencies=no + +[Service] +Type=oneshot +ExecStart=/usr/local/bin/accton_as5812_54t_util.py install +ExecStop=/usr/local/bin/accton_as5812_54t_util.py clean +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/utils/README b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/utils/README new file mode 100755 index 000000000000..2284eb091fcb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/utils/README @@ -0,0 +1,60 @@ +Copyright (C) 2016 Accton Networks, Inc. + +This program is free software: you can redistribute it and/or modify +It under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +To initialize the system, run "accton_as5812_54t_util.py install". +To clean up the drivers & devices, run "accton_as5812_54t_util.py clean". +To dump information of sensors, run "accton_as5812_54t_util.py show". +To dump SFP EEPROM, run "accton_as5812_54t_util.py sff". +To set fan speed, run "accton_as5812_54t_util.py set fan". +To enable/disable SFP emission, run "accton_as5812_54t_util.py set sfp". +To set system LEDs' color, run "accton_as5812_54t_util.py set led" +For more information, run "accton_as5812_54t_util.py --help". + +==================================================================== +Besides applying accton_as5812_54t_util.py to access peripherals, you can +access peripherals by sysfs nodes directly after the installation is run. + +LED controls can be found under /sys/class/leds. The sysfs interface +color mappings are as follows: +Brightness: + 0 => off + 1 => green + 2 => amber + 3 => red + 4 => blue + +There are 5 system LEDs, loc, diag, fan, ps1, and ps2. +They are lit automatically by CPLD, but the loc and diag. +The loc led has only 1 color, blue. +The diag one has 3 colors: red, amber, and green. + +Fan controls can be found in /sys/bus/i2c/devices/2-0066. +There are 12 fans inside 6 fan modules. +All fans share 1 duty setting, ranged from 0~100. + +Three temperature sensors are controlled by the lm75 kernel modules. +They should already be visible under /sys/bus/i2c/drivers/lm75/. + +Two power supplies are controlled by the CPLD. +Here provide their status under +/sys/bus/i2c/devices/10-0050 and /sys/bus/i2c/devices/11-0053. + +There are 32 QSFP+ modules are equipped. +Apply "accton_as5812_54t_util.py show" to get their status. +Apply "accton_as5812_54t_util.py set sfp" to turn on/off light transmission. +Apply "accton_as5812_54t_util.py sff" to dump EEPROM information. +Before operating on that QSFP+, please make sure it is well plugged. +Otherwise, operation is going to fail. + diff --git a/platform/broadcom/sonic-platform-modules-accton/as5812-54t/utils/accton_as5812_54t_util.py b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/utils/accton_as5812_54t_util.py new file mode 100755 index 000000000000..4e9b0795081d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as5812-54t/utils/accton_as5812_54t_util.py @@ -0,0 +1,565 @@ +#!/usr/bin/env python +# +# Copyright (C) 2016 Accton Networks, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes + show : show all systen status + sff : dump SFP eeprom + set : change board setting with fan|led|sfp +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + + + + +PROJECT_NAME = 'as5812_54t' +version = '0.1.0' +verbose = False +DEBUG = False +args = [] +ALL_DEVICE = {} +DEVICE_NO = {'led':5, 'fan':5,'thermal':3, 'psu':2, 'sfp':6} +FORCE = 0 +logging.basicConfig(filename= PROJECT_NAME+'.log', filemode='w',level=logging.DEBUG) +logging.basicConfig(level=logging.INFO) + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + do_install() + elif arg == 'clean': + do_uninstall() + elif arg == 'show': + device_traversal() + elif arg == 'sff': + if len(args)!=2: + show_eeprom_help() + elif int(args[1]) ==0 or int(args[1]) > DEVICE_NO['sfp']: + show_eeprom_help() + else: + show_eeprom(args[1]) + return + elif arg == 'set': + if len(args)<3: + show_set_help() + else: + set_device(args[1:]) + return + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_set_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print cmd +" [led|sfp|fan]" + print " use \""+ cmd + " led 0-4 \" to set led color" + print " use \""+ cmd + " fan 0-100\" to set fan duty percetage" + print " use \""+ cmd + " sfp 1-6 {0|1}\" to set sfp# tx_disable" + sys.exit(0) + +def show_eeprom_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print " use \""+ cmd + " 1-32 \" to dump sfp# eeprom" + sys.exit(0) + +def my_log(txt): + if DEBUG == True: + print "[ROY]"+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status, output = commands.getstatusoutput(cmd) + my_log (cmd +"with result:" + str(status)) + my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +def driver_check(): + ret, lsmod = log_os_system("lsmod| grep accton", 0) + logging.info('mods:'+lsmod) + if len(lsmod) ==0: + return False + return True + + + self.insmod("accton_i2c_cpld") + self.insmod("cpr_4011_4mxx") + self.insmod("ym2651y") + for m in [ "sfp", "psu", "fan", "leds" ]: + self.insmod("x86-64-accton-as5812-54t-%s" % m) + +kos = [ +'modprobe i2c_dev', +'modprobe i2c_mux_pca954x force_deselect_on_exit=1', +'modprobe accton_i2c_cpld' , +'modprobe cpr_4011_4mxx' , +'modprobe ym2651y' , +'modprobe x86-64-accton-as5812-54t-sfp' , +'modprobe x86-64-accton-as5812-54t-psu' , +'modprobe x86-64-accton-as5812-54t-fan' , +'modprobe x86-64-accton-as5812-54t-leds' ] + +def driver_install(): + global FORCE + for i in range(0,len(kos)): + status, output = log_os_system(kos[i], 1) + if status: + if FORCE == 0: + return status + return 0 + +def driver_uninstall(): + global FORCE + for i in range(0,len(kos)): + rm = kos[-(i+1)].replace("modprobe", "modprobe -rq") + rm = rm.replace("insmod", "rmmod") + status, output = log_os_system(rm, 1) + if status: + if FORCE == 0: + return status + return 0 + +led_prefix ='/sys/class/leds/accton_'+PROJECT_NAME+'_led::' +hwmon_types = {'led': ['diag','fan','loc','psu1','psu2']} +hwmon_nodes = {'led': ['brightness'] } +hwmon_prefix ={'led': led_prefix} + +i2c_prefix = '/sys/bus/i2c/devices/' +i2c_bus = {'fan': ['2-0066'] , + 'thermal': ['15-0048','16-0049', '17-004a'] , + 'psu': ['11-0050','12-0053'], + 'sfp': ['-0050']} +i2c_nodes = {'fan': ['present', 'front_speed_rpm', 'rear_speed_rpm'] , + 'thermal': ['hwmon/hwmon*/temp1_input'] , + 'psu': ['psu_present ', 'psu_power_good'] , + 'sfp': ['sfp_is_present ', 'sfp_tx_disable_all']} + +sfp_map = [4,6,3,5,7,2] + +sfp_1st_index = 48 + +mknod =[ +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-1/new_device' , +'echo accton_i2c_cpld 0x60 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-15/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-16/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-17/new_device', +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo as5812_54t_psu1 0x38 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo cpr_4011_4mxx 0x3c > /sys/bus/i2c/devices/i2c-11/new_device', +'echo as5812_54t_psu1 0x50 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo ym2401 0x58 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo as5812_54t_psu2 0x3b > /sys/bus/i2c/devices/i2c-12/new_device', +'echo cpr_4011_4mxx 0x3f > /sys/bus/i2c/devices/i2c-12/new_device', +'echo as5812_54t_psu2 0x53 > /sys/bus/i2c/devices/i2c-12/new_device', +'echo ym2401 0x5b > /sys/bus/i2c/devices/i2c-12/new_device'] + +mknod2 =[ +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-0/new_device' , +'echo accton_i2c_cpld 0x60 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-15/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-16/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-17/new_device', +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo as5812_54t_psu1 0x38 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo cpr_4011_4mxx 0x3c > /sys/bus/i2c/devices/i2c-11/new_device', +'echo as5812_54t_psu1 0x50 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo ym2401 0x58 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo as5812_54t_psu2 0x3b > /sys/bus/i2c/devices/i2c-12/new_device', +'echo cpr_4011_4mxx 0x3f > /sys/bus/i2c/devices/i2c-12/new_device', +'echo as5812_54t_psu2 0x53 > /sys/bus/i2c/devices/i2c-12/new_device', +'echo ym2401 0x5b > /sys/bus/i2c/devices/i2c-12/new_device'] + + + +def i2c_order_check(): + # i2c bus 0 and 1 might be installed in different order. + # Here check if 0x71 is exist @ i2c-0 + tmp = "echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-0/new_device" + status, output = log_os_system(tmp, 0) + if not device_exist(): + order = 1 + else: + order = 0 + tmp = "echo 0x71 > /sys/bus/i2c/devices/i2c-0/delete_device" + status, output = log_os_system(tmp, 0) + return order + +def device_install(): + global FORCE + + order = i2c_order_check() + + # if 0x71 is not exist @i2c-0, use reversed bus order + if order: + for i in range(0,len(mknod2)): + #for pca954x need times to built new i2c buses + if mknod2[i].find('pca954') != -1: + time.sleep(1) + + status, output = log_os_system(mknod2[i], 1) + if status: + print output + if FORCE == 0: + return status + else: + for i in range(0,len(mknod)): + #for pca954x need times to built new i2c buses + if mknod[i].find('pca954') != -1: + time.sleep(1) + + status, output = log_os_system(mknod[i], 1) + if status: + print output + if FORCE == 0: + return status + for i in range(sfp_1st_index,len(sfp_map)): + status, output =log_os_system("echo sfp"+str(i+1)+" 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + return + +def device_uninstall(): + global FORCE + + status, output =log_os_system("ls /sys/bus/i2c/devices/1-0071", 0) + if status==0: + I2C_ORDER=1 + else: + I2C_ORDER=0 + + for i in range(sfp_1st_index,len(sfp_map)): + target = "/sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/delete_device" + status, output =log_os_system("echo 0x50 > "+ target, 1) + if status: + print output + if FORCE == 0: + return status + + if I2C_ORDER==0: + nodelist = mknod + else: + nodelist = mknod2 + + for i in range(len(nodelist)): + target = nodelist[-(i+1)] + temp = target.split() + del temp[1] + temp[-1] = temp[-1].replace('new_device', 'delete_device') + status, output = log_os_system(" ".join(temp), 1) + if status: + print output + if FORCE == 0: + return status + + return + +def system_ready(): + if driver_check() == False: + return False + if not device_exist(): + return False + return True + +def do_install(): + print "Checking system...." + if driver_check() == False: + print "No driver, installing...." + status = driver_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" drivers detected...." + if not device_exist(): + print "No device, installing...." + status = device_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" devices detected...." + return + +def do_uninstall(): + print "Checking system...." + if not device_exist(): + print PROJECT_NAME.upper() +" has no device installed...." + else: + print "Removing device...." + status = device_uninstall() + if status: + if FORCE == 0: + return status + + if driver_check()== False : + print PROJECT_NAME.upper() +" has no driver installed...." + else: + print "Removing installed driver...." + status = driver_uninstall() + if status: + if FORCE == 0: + return status + + return + +def devices_info(): + global DEVICE_NO + global ALL_DEVICE + global i2c_bus, hwmon_types + for key in DEVICE_NO: + ALL_DEVICE[key]= {} + for i in range(0,DEVICE_NO[key]): + ALL_DEVICE[key][key+str(i+1)] = [] + + for key in i2c_bus: + buses = i2c_bus[key] + nodes = i2c_nodes[key] + for i in range(0,len(buses)): + for j in range(0,len(nodes)): + if 'fan' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ buses[i]+"/fan"+str(k+1)+"_"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + elif 'sfp' == key: + for k in range(sfp_1st_index,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ str(sfp_map[k])+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + else: + node = key+str(i+1) + path = i2c_prefix+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + + for key in hwmon_types: + itypes = hwmon_types[key] + nodes = hwmon_nodes[key] + for i in range(0,len(itypes)): + for j in range(0,len(nodes)): + node = key+"_"+itypes[i] + path = hwmon_prefix[key]+ itypes[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][ key+str(i+1)].append(path) + + #show dict all in the order + if DEBUG == True: + for i in sorted(ALL_DEVICE.keys()): + print(i+": ") + for j in sorted(ALL_DEVICE[i].keys()): + print(" "+j) + for k in (ALL_DEVICE[i][j]): + print(" "+" "+k) + return + +def show_eeprom(index): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + node = ALL_DEVICE['sfp'] ['sfp'+str(index)][0] + node = node.replace(node.split("/")[-1], 'sfp_eeprom') + # check if got hexdump command in current environment + ret, log = log_os_system("which hexdump", 0) + ret, log2 = log_os_system("which busybox hexdump", 0) + if len(log): + hex_cmd = 'hexdump' + elif len(log2): + hex_cmd = ' busybox hexdump' + else: + log = 'Failed : no hexdump cmd!!' + logging.info(log) + print log + return 1 + + print node + ":" + ret, log = log_os_system("cat "+node+"| "+hex_cmd+" -C", 1) + if ret==0: + print log + else: + print "**********device no found**********" + return + +def set_device(args): + global DEVICE_NO + global ALL_DEVICE + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + + if args[0]=='led': + if int(args[1])>4: + show_set_help() + return + #print ALL_DEVICE['led'] + for i in range(0,len(ALL_DEVICE['led'])): + for k in (ALL_DEVICE['led']['led'+str(i+1)]): + ret, log = log_os_system("echo "+args[1]+" >"+k, 1) + if ret: + return ret + elif args[0]=='fan': + if int(args[1])>100: + show_set_help() + return + #print ALL_DEVICE['fan'] + #fan1~6 is all fine, all fan share same setting + node = ALL_DEVICE['fan'] ['fan1'][0] + node = node.replace(node.split("/")[-1], 'fan_duty_cycle_percentage') + ret, log = log_os_system("cat "+ node, 1) + if ret==0: + print ("Previous fan duty: " + log.strip() +"%") + ret, log = log_os_system("echo "+args[1]+" >"+node, 1) + if ret==0: + print ("Current fan duty: " + args[1] +"%") + return ret + elif args[0]=='sfp': + if int(args[1])> DEVICE_NO[args[0]] or int(args[1])==0: + show_set_help() + return + if len(args)<2: + show_set_help() + return + + if int(args[2])>1: + show_set_help() + return + + #print ALL_DEVICE[args[0]] + for i in range(0,len(ALL_DEVICE[args[0]])): + for j in ALL_DEVICE[args[0]][args[0]+str(args[1])]: + if j.find('tx_disable')!= -1: + ret, log = log_os_system("echo "+args[2]+" >"+ j, 1) + if ret: + return ret + + return + +#get digits inside a string. +#Ex: 31 for "sfp31" +def get_value(input): + digit = re.findall('\d+', input) + return int(digit[0]) + +def device_traversal(): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + for i in sorted(ALL_DEVICE.keys()): + print("============================================") + print(i.upper()+": ") + print("============================================") + + for j in sorted(ALL_DEVICE[i].keys(), key=get_value): + print " "+j+":", + for k in (ALL_DEVICE[i][j]): + ret, log = log_os_system("cat "+k, 0) + func = k.split("/")[-1].strip() + func = re.sub(j+'_','',func,1) + func = re.sub(i.lower()+'_','',func,1) + if ret==0: + print func+"="+log+" ", + else: + print func+"="+"X"+" ", + print + print("----------------------------------------------------------------") + + + print + return + +def device_exist(): + ret1, log = log_os_system("ls "+i2c_prefix+"*0071", 0) + ret2, log = log_os_system("ls "+i2c_prefix+"i2c-2", 0) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/__init__.py b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/__init__.py new file mode 100755 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/fanutil.py b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/fanutil.py new file mode 100755 index 000000000000..207436c1fc96 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/fanutil.py @@ -0,0 +1,255 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018: Jostar modify for as7716_32 +# 2/27/2018: Roy Lee modify for as7312_54x +# ------------------------------------------------------------------ + +try: + import time + import logging + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class FanUtil(object): + """Platform-specific FanUtil class""" + + FAN_NUM_ON_MAIN_BROAD = 6 + FAN_NUM_1_IDX = 1 + FAN_NUM_2_IDX = 2 + FAN_NUM_3_IDX = 3 + FAN_NUM_4_IDX = 4 + FAN_NUM_5_IDX = 5 + FAN_NUM_6_IDX = 6 + + FAN_NODE_NUM_OF_MAP = 2 + FAN_NODE_FAULT_IDX_OF_MAP = 1 + #FAN_NODE_SPEED_IDX_OF_MAP = 2 + FAN_NODE_DIR_IDX_OF_MAP = 2 + #FAN_NODE_DUTY_IDX_OF_MAP = 4 + #FANR_NODE_FAULT_IDX_OF_MAP = 5 + + #BASE_VAL_PATH = '/sys/devices/platform/as5712_54x_fan/{0}' + BASE_VAL_PATH = '/sys/bus/i2c/devices/2-0066/{0}' + FAN_DUTY_PATH = '/sys/bus/i2c/devices/2-0066/fan_duty_cycle_percentage' + + #logfile = '' + #loglevel = logging.INFO + + """ Dictionary where + key1 = fan id index (integer) starting from 1 + key2 = fan node index (interger) starting from 1 + value = path to fan device file (string) """ + _fan_to_device_path_mapping = {} + +#fan1_direction +#fan1_fault +#fan1_present + + #(FAN_NUM_2_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan2_duty_cycle_percentage', + _fan_to_device_node_mapping = { + (FAN_NUM_1_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan1_fault', + (FAN_NUM_1_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan1_direction', + + (FAN_NUM_2_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan2_fault', + (FAN_NUM_2_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan2_direction', + + (FAN_NUM_3_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan3_fault', + (FAN_NUM_3_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan3_direction', + + (FAN_NUM_4_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan4_fault', + (FAN_NUM_4_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan4_direction', + + (FAN_NUM_5_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan5_fault', + (FAN_NUM_5_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan5_direction', + + (FAN_NUM_6_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan6_fault', + (FAN_NUM_6_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan6_direction', + } + + def _get_fan_to_device_node(self, fan_num, node_num): + return self._fan_to_device_node_mapping[(fan_num, node_num)] + + def _get_fan_node_val(self, fan_num, node_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + + try: + val_file = open(device_path, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + def _set_fan_node_val(self, fan_num, node_num, val): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + content = str(val) + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + try: + val_file = open(device_path, 'w') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + val_file.write(content) + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return True + + def __init__(self): + fan_path = self.BASE_VAL_PATH + + for fan_num in range(self.FAN_NUM_1_IDX, self.FAN_NUM_ON_MAIN_BROAD+1): + for node_num in range(self.FAN_NODE_FAULT_IDX_OF_MAP, self.FAN_NODE_NUM_OF_MAP+1): + self._fan_to_device_path_mapping[(fan_num, node_num)] = fan_path.format( + self._fan_to_device_node_mapping[(fan_num, node_num)]) + + def get_num_fans(self): + return self.FAN_NUM_ON_MAIN_BROAD + + def get_idx_fan_start(self): + return self.FAN_NUM_1_IDX + + def get_num_nodes(self): + return self.FAN_NODE_NUM_OF_MAP + + def get_idx_node_start(self): + return self.FAN_NODE_FAULT_IDX_OF_MAP + + def get_size_node_map(self): + return len(self._fan_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._fan_to_device_path_mapping) + + def get_fan_to_device_path(self, fan_num, node_num): + return self._fan_to_device_path_mapping[(fan_num, node_num)] + + def get_fan_fault(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_FAULT_IDX_OF_MAP) + + #def get_fan_speed(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FAN_NODE_SPEED_IDX_OF_MAP) + + def get_fan_dir(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_DIR_IDX_OF_MAP) + + def get_fan_duty_cycle(self): + #duty_path = self.FAN_DUTY_PATH + try: + val_file = open(self.FAN_DUTY_PATH) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = val_file.readline().rstrip() + val_file.close() + + return int(content) + #self._get_fan_node_val(fan_num, self.FAN_NODE_DUTY_IDX_OF_MAP) +#static u32 reg_val_to_duty_cycle(u8 reg_val) +#{ +# reg_val &= FAN_DUTY_CYCLE_REG_MASK; +# return ((u32)(reg_val+1) * 625 + 75)/ 100; +#} +# + def set_fan_duty_cycle(self, val): + + try: + fan_file = open(self.FAN_DUTY_PATH, 'r+') + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + #val = ((val + 1 ) * 625 +75 ) / 100 + fan_file.write(str(val)) + fan_file.close() + return True + + #def get_fanr_fault(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FANR_NODE_FAULT_IDX_OF_MAP) + + def get_fanr_speed(self, fan_num): + return self._get_fan_node_val(fan_num, self.FANR_NODE_SPEED_IDX_OF_MAP) + + def get_fan_status(self, fan_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num, %d', fan_num) + return None + + if self.get_fan_fault(fan_num) is not None and self.get_fan_fault(fan_num) > 0: + logging.debug('GET. FAN fault. fan_num, %d', fan_num) + return False + + #if self.get_fanr_fault(fan_num) is not None and self.get_fanr_fault(fan_num) > 0: + # logging.debug('GET. FANR fault. fan_num, %d', fan_num) + # return False + + return True + +#def main(): +# fan = FanUtil() +# +# print 'get_size_node_map : %d' % fan.get_size_node_map() +# print 'get_size_path_map : %d' % fan.get_size_path_map() +# for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): +# for y in range(fan.get_idx_node_start(), fan.get_num_nodes()+1): +# print fan.get_fan_to_device_path(x, y) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/thermalutil.py b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/thermalutil.py new file mode 100755 index 000000000000..68f0ef900df6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/classes/thermalutil.py @@ -0,0 +1,124 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018:Jostar modify for as7716_32x +# 2/27/2018: Roy Lee modify for as7312_54x +# ------------------------------------------------------------------ + +try: + import time + import logging + import glob + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class ThermalUtil(object): + """Platform-specific ThermalUtil class""" + + THERMAL_NUM_ON_MAIN_BROAD = 3 + THERMAL_NUM_1_IDX = 1 # 1_ON_MAIN_BROAD + THERMAL_NUM_2_IDX = 2 # 2_ON_MAIN_BROAD + THERMAL_NUM_3_IDX = 3 # 3_ON_MAIN_BROAD + + BASE_VAL_PATH = '/sys/bus/i2c/devices/{0}-00{1}/hwmon/hwmon*/temp1_input' + + """ Dictionary where + key1 = thermal id index (integer) starting from 1 + value = path to fan device file (string) """ + _thermal_to_device_path_mapping = {} + + _thermal_to_device_node_mapping = { + THERMAL_NUM_1_IDX: ['3', '48'], + THERMAL_NUM_2_IDX: ['3', '49'], + THERMAL_NUM_3_IDX: ['3', '4a'], + } + + def __init__(self): + thermal_path = self.BASE_VAL_PATH + + for x in range(self.THERMAL_NUM_1_IDX, self.THERMAL_NUM_ON_MAIN_BROAD+1): + self._thermal_to_device_path_mapping[x] = thermal_path.format( + self._thermal_to_device_node_mapping[x][0], + self._thermal_to_device_node_mapping[x][1]) + + def _get_thermal_node_val(self, thermal_num): + if thermal_num < self.THERMAL_NUM_1_IDX or thermal_num > self.THERMAL_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. thermal_num, %d', thermal_num) + return None + + device_path = self.get_thermal_to_device_path(thermal_num) + for filename in glob.glob(device_path): + try: + val_file = open(filename, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + + def get_num_thermals(self): + return self.THERMAL_NUM_ON_MAIN_BROAD + + def get_idx_thermal_start(self): + return self.THERMAL_NUM_1_IDX + + def get_size_node_map(self): + return len(self._thermal_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._thermal_to_device_path_mapping) + + def get_thermal_to_device_path(self, thermal_num): + return self._thermal_to_device_path_mapping[thermal_num] + + def get_thermal_1_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + + def get_thermal_2_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) + def get_thermal_temp(self): + return (self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) +self._get_thermal_node_val(self.THERMAL_NUM_3_IDX)) + +#def main(): +# thermal = ThermalUtil() +# +# print 'get_size_node_map : %d' % thermal.get_size_node_map() +# print 'get_size_path_map : %d' % thermal.get_size_path_map() +# for x in range(thermal.get_idx_thermal_start(), thermal.get_num_thermals()+1): +# print thermal.get_thermal_to_device_path(x) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/Makefile b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/Makefile new file mode 100755 index 000000000000..488fdb321cac --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/Makefile @@ -0,0 +1,17 @@ +ifneq ($(KERNELRELEASE),) +obj-m:= accton_i2c_cpld.o \ + accton_as7312_54x_fan.o accton_as7312_54x_leds.o \ + accton_as7312_54x_psu.o ym2651y.o + +else +ifeq (,$(KERNEL_SRC)) +$(error KERNEL_SRC is not defined) +else +KERNELDIR:=$(KERNEL_SRC) +endif +PWD:=$(shell pwd) +default: + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules +clean: + rm -rf *.o *.mod.o *.mod.o *.ko .*cmd .tmp_versions Module.markers Module.symvers modules.order +endif diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_fan.c b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_fan.c new file mode 100755 index 000000000000..8764ec8a3176 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_fan.c @@ -0,0 +1,815 @@ +/* + * A hwmon driver for the Accton as7312 54x fan + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "as7312_54x_fan" + +#define NUM_THERMAL_SENSORS (3) /* Get sum of this number of sensors.*/ +#define THERMAL_SENSORS_DRIVER "lm75" +#define THERMAL_SENSORS_ADDRS {0x48, 0x49, 0x4a} + +#define IN +#define OUT + +static struct as7312_54x_fan_data *as7312_54x_fan_update_device(struct device *dev); +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_enable(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, char *buf); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +/* fan related data, the index should match sysfs_fan_attributes + */ +static const u8 fan_reg[] = { + 0x0F, /* fan 1-6 present status */ + 0x10, /* fan 1-6 direction(0:F2B 1:B2F) */ + 0x11, /* fan PWM(for all fan) */ + 0x12, /* front fan 1 speed(rpm) */ + 0x13, /* front fan 2 speed(rpm) */ + 0x14, /* front fan 3 speed(rpm) */ + 0x15, /* front fan 4 speed(rpm) */ + 0x16, /* front fan 5 speed(rpm) */ + 0x17, /* front fan 6 speed(rpm) */ + 0x22, /* rear fan 1 speed(rpm) */ + 0x23, /* rear fan 2 speed(rpm) */ + 0x24, /* rear fan 3 speed(rpm) */ + 0x25, /* rear fan 4 speed(rpm) */ + 0x26, /* rear fan 5 speed(rpm) */ + 0x27, /* rear fan 6 speed(rpm) */ +}; + +/* Each client has this additional data */ +struct as7312_54x_fan_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[ARRAY_SIZE(fan_reg)]; /* Register value */ + u8 enable; + int system_temp; /*In unit of mini-Celsius*/ + int sensors_found; +}; + +enum fan_id { + FAN1_ID, + FAN2_ID, + FAN3_ID, + FAN4_ID, + FAN5_ID, + FAN6_ID +}; + +enum sysfs_fan_attributes { + FAN_PRESENT_REG, + FAN_DIRECTION_REG, + FAN_DUTY_CYCLE_PERCENTAGE, /* Only one CPLD register to control duty cycle for all fans */ + FAN1_FRONT_SPEED_RPM, + FAN2_FRONT_SPEED_RPM, + FAN3_FRONT_SPEED_RPM, + FAN4_FRONT_SPEED_RPM, + FAN5_FRONT_SPEED_RPM, + FAN6_FRONT_SPEED_RPM, + FAN1_REAR_SPEED_RPM, + FAN2_REAR_SPEED_RPM, + FAN3_REAR_SPEED_RPM, + FAN4_REAR_SPEED_RPM, + FAN5_REAR_SPEED_RPM, + FAN6_REAR_SPEED_RPM, + FAN1_DIRECTION, + FAN2_DIRECTION, + FAN3_DIRECTION, + FAN4_DIRECTION, + FAN5_DIRECTION, + FAN6_DIRECTION, + FAN1_PRESENT, + FAN2_PRESENT, + FAN3_PRESENT, + FAN4_PRESENT, + FAN5_PRESENT, + FAN6_PRESENT, + FAN1_FAULT, + FAN2_FAULT, + FAN3_FAULT, + FAN4_FAULT, + FAN5_FAULT, + FAN6_FAULT +}; + +/* Define attributes + */ +#define DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT);\ + static SENSOR_DEVICE_ATTR(fan##index2##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT) +#define DECLARE_FAN_FAULT_ATTR(index, index2) &sensor_dev_attr_fan##index##_fault.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_fault.dev_attr.attr + +#define DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_direction, S_IRUGO, fan_show_value, NULL, FAN##index##_DIRECTION) +#define DECLARE_FAN_DIRECTION_ATTR(index) &sensor_dev_attr_fan##index##_direction.dev_attr.attr + +#define DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index##_enable, S_IWUSR | S_IRUGO, get_enable, set_enable, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_DUTY_CYCLE_ATTR(index) &sensor_dev_attr_fan_duty_cycle_percentage.dev_attr.attr, \ + &sensor_dev_attr_pwm##index.dev_attr.attr, \ + &sensor_dev_attr_pwm##index##_enable.dev_attr.attr + +#define DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR() \ + static SENSOR_DEVICE_ATTR(sys_temp, S_IRUGO, get_sys_temp, NULL, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_SYSTEM_TEMP_ATTR() &sensor_dev_attr_sys_temp.dev_attr.attr + + +#define DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_present, S_IRUGO, fan_show_value, NULL, FAN##index##_PRESENT) +#define DECLARE_FAN_PRESENT_ATTR(index) &sensor_dev_attr_fan##index##_present.dev_attr.attr + +#define DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_front_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_rear_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index2##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM) +#define DECLARE_FAN_SPEED_RPM_ATTR(index, index2) &sensor_dev_attr_fan##index##_front_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_rear_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_input.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_input.dev_attr.attr + +/* 6 fan fault attributes in this platform */ +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(6,16); +/* 6 fan speed(rpm) attributes in this platform */ +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(6,16); +/* 6 fan present attributes in this platform */ +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(1); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(2); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(3); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(4); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(5); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(6); +/* 6 fan direction attribute in this platform */ +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(1); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(2); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(3); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(4); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(5); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(6); +/* 1 fan duty cycle attribute in this platform */ +DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(1); +/* System temperature for fancontrol */ +DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR(); + +static struct attribute *as7312_54x_fan_attributes[] = { + /* fan related attributes */ + DECLARE_FAN_FAULT_ATTR(1,11), + DECLARE_FAN_FAULT_ATTR(2,12), + DECLARE_FAN_FAULT_ATTR(3,13), + DECLARE_FAN_FAULT_ATTR(4,14), + DECLARE_FAN_FAULT_ATTR(5,15), + DECLARE_FAN_FAULT_ATTR(6,16), + DECLARE_FAN_SPEED_RPM_ATTR(1,11), + DECLARE_FAN_SPEED_RPM_ATTR(2,12), + DECLARE_FAN_SPEED_RPM_ATTR(3,13), + DECLARE_FAN_SPEED_RPM_ATTR(4,14), + DECLARE_FAN_SPEED_RPM_ATTR(5,15), + DECLARE_FAN_SPEED_RPM_ATTR(6,16), + DECLARE_FAN_PRESENT_ATTR(1), + DECLARE_FAN_PRESENT_ATTR(2), + DECLARE_FAN_PRESENT_ATTR(3), + DECLARE_FAN_PRESENT_ATTR(4), + DECLARE_FAN_PRESENT_ATTR(5), + DECLARE_FAN_PRESENT_ATTR(6), + DECLARE_FAN_DIRECTION_ATTR(1), + DECLARE_FAN_DIRECTION_ATTR(2), + DECLARE_FAN_DIRECTION_ATTR(3), + DECLARE_FAN_DIRECTION_ATTR(4), + DECLARE_FAN_DIRECTION_ATTR(5), + DECLARE_FAN_DIRECTION_ATTR(6), + DECLARE_FAN_DUTY_CYCLE_ATTR(1), + DECLARE_FAN_SYSTEM_TEMP_ATTR(), + NULL +}; + +#define FAN_DUTY_CYCLE_REG_MASK 0xF +#define FAN_MAX_DUTY_CYCLE 100 +#define FAN_REG_VAL_TO_SPEED_RPM_STEP 100 + +static int as7312_54x_fan_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int as7312_54x_fan_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* fan utility functions + */ +static u32 reg_val_to_duty_cycle(u8 reg_val) +{ + reg_val &= FAN_DUTY_CYCLE_REG_MASK; + return ((u32)(reg_val+1) * 625 + 75)/ 100; +} + +static u8 duty_cycle_to_reg_val(u8 duty_cycle) +{ + return ((u32)duty_cycle * 100 / 625) - 1; +} + +static u32 reg_val_to_speed_rpm(u8 reg_val) +{ + return (u32)reg_val * FAN_REG_VAL_TO_SPEED_RPM_STEP; +} + +static u8 reg_val_to_direction(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 1 : 0; +} +static u8 reg_val_to_is_present(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 0 : 1; +} + +static u8 is_fan_fault(struct as7312_54x_fan_data *data, enum fan_id id) +{ + u8 ret = 1; + int front_fan_index = FAN1_FRONT_SPEED_RPM + id; + int rear_fan_index = FAN1_REAR_SPEED_RPM + id; + + /* Check if the speed of front or rear fan is ZERO, + */ + if (reg_val_to_speed_rpm(data->reg_val[front_fan_index]) && + reg_val_to_speed_rpm(data->reg_val[rear_fan_index])) { + ret = 0; + } + + return ret; +} + +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct as7312_54x_fan_data *data = as7312_54x_fan_update_device(dev); + int error, value; + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > 1) + return -EINVAL; + + data->enable = value; + if (value == 0) + { + return set_duty_cycle(dev, da, buf, FAN_MAX_DUTY_CYCLE); + } + return count; +} + + +static ssize_t get_enable(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7312_54x_fan_data *data = as7312_54x_fan_update_device(dev); + + return sprintf(buf, "%u\n", data->enable); +} +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int error, value; + struct i2c_client *client = to_i2c_client(dev); + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0) + return -EINVAL; + + value = (value > FAN_MAX_DUTY_CYCLE)? FAN_MAX_DUTY_CYCLE : value; + + as7312_54x_fan_write_value(client, 0x33, 0); /* Disable fan speed watch dog */ + as7312_54x_fan_write_value(client, fan_reg[FAN_DUTY_CYCLE_PERCENTAGE], duty_cycle_to_reg_val(value)); + return count; +} + +/* Due to this struct is declared at lm75.c, it cannot be include + * under Sonic environment. I duplicate it from lm75.c. + */ +struct lm75_data { + struct i2c_client *client; + struct device *hwmon_dev; + struct thermal_zone_device *tz; + struct mutex update_lock; + u8 orig_conf; + u8 resolution; /* In bits, between 9 and 12 */ + u8 resolution_limits; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + unsigned long sample_time; /* In jiffies */ + s16 temp[3]; /* Register values, + 0 = input + 1 = max + 2 = hyst */ +}; + +/*Copied from lm75.c*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + +/*Get hwmon_dev from i2c_client, set hwmon_dev = NULL is failed.*/ +static struct device * get_hwmon_dev( + struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if(data) + { + if( data->valid == 1 && data->hwmon_dev) + { + return data->hwmon_dev; + } + + } + return NULL; +} + +/* To find hwmon index by opening hwmon under that i2c address. + */ +static int find_hwmon_index_by_FileOpen( + int bus_nr, + unsigned short addr, + OUT int *index) +{ +#define MAX_HWMON_DEVICE (10) /* Find hwmon device in 0~10*/ + struct file *sfd; + char client_name[96]; + int i=0; + + do { + snprintf(client_name, sizeof(client_name), + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + + sfd = filp_open(client_name, O_RDONLY, 0); + i++; + } while( IS_ERR(sfd) && i < MAX_HWMON_DEVICE); + + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", client_name, __LINE__); + return -ENOENT; + } + filp_close(sfd, 0); + *index = i - 1; + return 0; + +#undef MAX_HWMON_DEVICE +} + +static int get_temp_file_path( + int bus_nr, unsigned short addr, + struct device *hwmon_dev + ,char *path, int max_len) +{ + + if(hwmon_dev && strlen(dev_name(hwmon_dev))) + { + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/%s/temp1_input", + bus_nr, addr, dev_name(hwmon_dev)); + } + else + { + int i=0; + if(find_hwmon_index_by_FileOpen( bus_nr, addr, &i)) + { + return -EIO; + } + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + } + return 0; +} + +/*File read the dev file at user space.*/ +static int read_devfile_temp1_input( + struct device *dev, + int bus_nr, + unsigned short addr, + struct device *hwmon_dev, + int *miniCelsius) +{ + struct file *sfd; + char buffer[96]; + char devfile[96]; + int rc, status; + int rdlen, value; + mm_segment_t old_fs; + + rc = 0; + get_temp_file_path(bus_nr, addr, hwmon_dev, devfile, sizeof(devfile)); + sfd = filp_open(devfile, O_RDONLY, 0); + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", devfile, __LINE__); + return -ENOENT; + } + dev_dbg(dev, "Found device:%s\n",devfile); + + if(!(sfd->f_op) || !(sfd->f_op->read) ) { + pr_err("file %s cann't readable ?\n",devfile); + return -ENOENT; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + rdlen = sfd->f_op->read(sfd, buffer, sizeof(buffer), &sfd->f_pos); + if (rdlen == 0) { + pr_err( "File(%s) empty!\n", devfile); + rc = -EIO; + goto exit; + } + status = sscanf(buffer, "%d", &value); + if (status != 1) { + rc = -EIO; + goto exit; + } + *miniCelsius = value; + dev_dbg(dev,"found sensors: %d @i2c %d-%04x\n", value, bus_nr, addr); + +exit: + set_fs(old_fs); + filp_close(sfd, 0); + return rc; +} + +static u8 is_lm75_data_due(struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if (time_after(jiffies, data->last_updated + data->sample_time)) + { + return 1; + } + return 0; +} +static int get_lm75_temp(struct i2c_client *client, int *miniCelsius) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + *miniCelsius = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + +static bool lm75_addr_mached(unsigned short addr) +{ + int i; + unsigned short addrs[] = THERMAL_SENSORS_ADDRS; + + for (i = 0; i < ARRAY_SIZE(addrs); i++) + { + if( addr == addrs[i]) + return 1; + } + return 0; +} + +static int _find_lm75_device(struct device *dev, void *data) +{ + struct device_driver *driver; + struct as7312_54x_fan_data *prv = data; + char *driver_name = THERMAL_SENSORS_DRIVER; + + driver = dev->driver; + if (driver && driver->name && + strcmp(driver->name, driver_name) == 0) + { + struct i2c_client *client; + client = to_i2c_client(dev); + if (client) + { + /*cannot use "struct i2c_adapter *adap = to_i2c_adapter(dev);"*/ + struct i2c_adapter *adap = client->adapter; + int miniCelsius = 0; + + if (! lm75_addr_mached(client->addr)) + { + return 0; + } + + if (!adap) { + return -ENXIO; + } + + /* If the data is not updated, read them from devfile + to drive them updateing data from chip.*/ + if (is_lm75_data_due(client)) + { + struct device *hwmon_dev; + + hwmon_dev = get_hwmon_dev(client); + if(0 == read_devfile_temp1_input(dev, adap->nr, + client->addr, hwmon_dev, &miniCelsius)) + { + prv->system_temp += miniCelsius; + prv->sensors_found++; + } + + } + else + { + get_lm75_temp(client, &miniCelsius); + prv->system_temp += miniCelsius; + prv->sensors_found++; + + } + } + } + return 0; +} + +/*Find all lm75 devices and return sum of temperatures.*/ +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + ssize_t ret = 0; + struct as7312_54x_fan_data *data = as7312_54x_fan_update_device(dev); + + data->system_temp=0; + data->sensors_found=0; + i2c_for_each_dev(data, _find_lm75_device); + if (NUM_THERMAL_SENSORS != data->sensors_found) + { + dev_dbg(dev,"only %d of %d temps are found\n", + data->sensors_found, NUM_THERMAL_SENSORS); + data->system_temp = INT_MAX; + } + ret = sprintf(buf, "%d\n",data->system_temp); + return ret; +} + +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7312_54x_fan_data *data = as7312_54x_fan_update_device(dev); + ssize_t ret = 0; + + if (data->valid) { + switch (attr->index) { + case FAN_DUTY_CYCLE_PERCENTAGE: + { + u32 duty_cycle = reg_val_to_duty_cycle(data->reg_val[FAN_DUTY_CYCLE_PERCENTAGE]); + ret = sprintf(buf, "%u\n", duty_cycle); + break; + } + case FAN1_FRONT_SPEED_RPM: + case FAN2_FRONT_SPEED_RPM: + case FAN3_FRONT_SPEED_RPM: + case FAN4_FRONT_SPEED_RPM: + case FAN5_FRONT_SPEED_RPM: + case FAN6_FRONT_SPEED_RPM: + case FAN1_REAR_SPEED_RPM: + case FAN2_REAR_SPEED_RPM: + case FAN3_REAR_SPEED_RPM: + case FAN4_REAR_SPEED_RPM: + case FAN5_REAR_SPEED_RPM: + case FAN6_REAR_SPEED_RPM: + ret = sprintf(buf, "%u\n", reg_val_to_speed_rpm(data->reg_val[attr->index])); + break; + case FAN1_PRESENT: + case FAN2_PRESENT: + case FAN3_PRESENT: + case FAN4_PRESENT: + case FAN5_PRESENT: + case FAN6_PRESENT: + ret = sprintf(buf, "%d\n", + reg_val_to_is_present(data->reg_val[FAN_PRESENT_REG], + attr->index - FAN1_PRESENT)); + break; + case FAN1_FAULT: + case FAN2_FAULT: + case FAN3_FAULT: + case FAN4_FAULT: + case FAN5_FAULT: + case FAN6_FAULT: + ret = sprintf(buf, "%d\n", is_fan_fault(data, attr->index - FAN1_FAULT)); + break; + case FAN1_DIRECTION: + case FAN2_DIRECTION: + case FAN3_DIRECTION: + case FAN4_DIRECTION: + case FAN5_DIRECTION: + case FAN6_DIRECTION: + ret = sprintf(buf, "%d\n", + reg_val_to_direction(data->reg_val[FAN_DIRECTION_REG], + attr->index - FAN1_DIRECTION)); + break; + default: + break; + } + } + + return ret; +} + +static const struct attribute_group as7312_54x_fan_group = { + .attrs = as7312_54x_fan_attributes, +}; + +static struct as7312_54x_fan_data *as7312_54x_fan_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7312_54x_fan_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || + !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting as7312_54x_fan update\n"); + data->valid = 0; + + /* Update fan data + */ + for (i = 0; i < ARRAY_SIZE(data->reg_val); i++) { + int status = as7312_54x_fan_read_value(client, fan_reg[i]); + + if (status < 0) { + data->valid = 0; + mutex_unlock(&data->update_lock); + dev_dbg(&client->dev, "reg %d, err %d\n", fan_reg[i], status); + return data; + } + else { + data->reg_val[i] = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int as7312_54x_fan_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7312_54x_fan_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7312_54x_fan_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->enable = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7312_54x_fan_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: fan '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7312_54x_fan_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7312_54x_fan_remove(struct i2c_client *client) +{ + struct as7312_54x_fan_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7312_54x_fan_group); + + return 0; +} + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x66, I2C_CLIENT_END }; + +static const struct i2c_device_id as7312_54x_fan_id[] = { + { "as7312_54x_fan", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7312_54x_fan_id); + +static struct i2c_driver as7312_54x_fan_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = DRVNAME, + }, + .probe = as7312_54x_fan_probe, + .remove = as7312_54x_fan_remove, + .id_table = as7312_54x_fan_id, + .address_list = normal_i2c, +}; + +static int __init as7312_54x_fan_init(void) +{ + return i2c_add_driver(&as7312_54x_fan_driver); +} + +static void __exit as7312_54x_fan_exit(void) +{ + i2c_del_driver(&as7312_54x_fan_driver); +} + +module_init(as7312_54x_fan_init); +module_exit(as7312_54x_fan_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7312_54x_fan driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_leds.c b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_leds.c new file mode 100644 index 000000000000..1d54517c6243 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_leds.c @@ -0,0 +1,438 @@ +/* + * A LED driver for the accton_as7312_54x_led + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +extern int as7312_54x_cpld_read (unsigned short cpld_addr, u8 reg); +extern int as7312_54x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +extern void led_classdev_unregister(struct led_classdev *led_cdev); +extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); +extern void led_classdev_resume(struct led_classdev *led_cdev); +extern void led_classdev_suspend(struct led_classdev *led_cdev); + +#define DRVNAME "accton_as7312_54x_led" + +struct accton_as7312_54x_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[1]; /* only 1 register*/ +}; + +static struct accton_as7312_54x_led_data *ledctl = NULL; + +/* LED related data + */ + +#define LED_CNTRLER_I2C_ADDRESS (0x60) + +#define LED_TYPE_DIAG_REG_MASK (0x3) +#define LED_MODE_DIAG_GREEN_VALUE (0x02) +#define LED_MODE_DIAG_RED_VALUE (0x01) +#define LED_MODE_DIAG_AMBER_VALUE (0x00) /*It's yellow actually. Green+Red=Yellow*/ +#define LED_MODE_DIAG_OFF_VALUE (0x03) + + +#define LED_TYPE_LOC_REG_MASK (0x80) +#define LED_MODE_LOC_ON_VALUE (0) +#define LED_MODE_LOC_OFF_VALUE (0x80) + +enum led_type { + LED_TYPE_DIAG, + LED_TYPE_LOC, + LED_TYPE_FAN, + LED_TYPE_PSU1, + LED_TYPE_PSU2 +}; + +struct led_reg { + u32 types; + u8 reg_addr; +}; + +static const struct led_reg led_reg_map[] = { + {(1<update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting accton_as7312_54x_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = accton_as7312_54x_led_read_value(led_reg_map[i].reg_addr); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg_map[i].reg_addr, status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void accton_as7312_54x_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + enum led_type type) +{ + int reg_val; + u8 reg ; + mutex_lock(&ledctl->update_lock); + + if( !accton_getLedReg(type, ®)) + { + dev_dbg(&ledctl->pdev->dev, "Not match item for %d.\n", type); + } + + reg_val = accton_as7312_54x_led_read_value(reg); + + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + accton_as7312_54x_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + + +static void accton_as7312_54x_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as7312_54x_led_set(led_cdev, led_light_mode, LED_TYPE_DIAG); +} + +static enum led_brightness accton_as7312_54x_led_diag_get(struct led_classdev *cdev) +{ + accton_as7312_54x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void accton_as7312_54x_led_loc_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as7312_54x_led_set(led_cdev, led_light_mode, LED_TYPE_LOC); +} + +static enum led_brightness accton_as7312_54x_led_loc_get(struct led_classdev *cdev) +{ + accton_as7312_54x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_LOC, ledctl->reg_val[0]); +} + +static void accton_as7312_54x_led_auto_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ +} + +static enum led_brightness accton_as7312_54x_led_auto_get(struct led_classdev *cdev) +{ + return LED_MODE_AUTO; +} + +static struct led_classdev accton_as7312_54x_leds[] = { + [LED_TYPE_DIAG] = { + .name = "accton_as7312_54x_led::diag", + .default_trigger = "unused", + .brightness_set = accton_as7312_54x_led_diag_set, + .brightness_get = accton_as7312_54x_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_RED, + }, + [LED_TYPE_LOC] = { + .name = "accton_as7312_54x_led::loc", + .default_trigger = "unused", + .brightness_set = accton_as7312_54x_led_loc_set, + .brightness_get = accton_as7312_54x_led_loc_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_BLUE, + }, + [LED_TYPE_FAN] = { + .name = "accton_as7312_54x_led::fan", + .default_trigger = "unused", + .brightness_set = accton_as7312_54x_led_auto_set, + .brightness_get = accton_as7312_54x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU1] = { + .name = "accton_as7312_54x_led::psu1", + .default_trigger = "unused", + .brightness_set = accton_as7312_54x_led_auto_set, + .brightness_get = accton_as7312_54x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU2] = { + .name = "accton_as7312_54x_led::psu2", + .default_trigger = "unused", + .brightness_set = accton_as7312_54x_led_auto_set, + .brightness_get = accton_as7312_54x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, +}; + +static int accton_as7312_54x_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as7312_54x_leds); i++) { + led_classdev_suspend(&accton_as7312_54x_leds[i]); + } + + return 0; +} + +static int accton_as7312_54x_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as7312_54x_leds); i++) { + led_classdev_resume(&accton_as7312_54x_leds[i]); + } + + return 0; +} + +static int accton_as7312_54x_led_probe(struct platform_device *pdev) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(accton_as7312_54x_leds); i++) { + ret = led_classdev_register(&pdev->dev, &accton_as7312_54x_leds[i]); + + if (ret < 0) + break; + } + + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(accton_as7312_54x_leds)) { + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&accton_as7312_54x_leds[i]); + } + } + + return ret; +} + +static int accton_as7312_54x_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(accton_as7312_54x_leds); i++) { + led_classdev_unregister(&accton_as7312_54x_leds[i]); + } + + return 0; +} + +static struct platform_driver accton_as7312_54x_led_driver = { + .probe = accton_as7312_54x_led_probe, + .remove = accton_as7312_54x_led_remove, + .suspend = accton_as7312_54x_led_suspend, + .resume = accton_as7312_54x_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init accton_as7312_54x_led_init(void) +{ + int ret; + + ret = platform_driver_register(&accton_as7312_54x_led_driver); + if (ret < 0) { + goto exit; + } + + ledctl = kzalloc(sizeof(struct accton_as7312_54x_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&accton_as7312_54x_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&accton_as7312_54x_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return ret; +} + +static void __exit accton_as7312_54x_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&accton_as7312_54x_led_driver); + kfree(ledctl); +} + +module_init(accton_as7312_54x_led_init); +module_exit(accton_as7312_54x_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_as7312_54x_led driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_psu.c b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_psu.c new file mode 100644 index 000000000000..4646224ef903 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_psu.c @@ -0,0 +1,277 @@ +/* + * An hwmon driver for accton as7312_54x Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, char *buf); +static int as7312_54x_psu_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int as7312_54x_cpld_read(unsigned short cpld_addr, u8 reg); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x50, 0x53, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7312_54x_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ + char model_name[9]; /* Model name, read from eeprom */ +}; + +static struct as7312_54x_psu_data *as7312_54x_psu_update_device(struct device *dev); + +enum as7312_54x_psu_sysfs_attributes { + PSU_PRESENT, + PSU_MODEL_NAME, + PSU_POWER_GOOD +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_present, S_IRUGO, show_status, NULL, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_model_name, S_IRUGO, show_model_name,NULL, PSU_MODEL_NAME); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_status, NULL, PSU_POWER_GOOD); + +static struct attribute *as7312_54x_psu_attributes[] = { + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_model_name.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + NULL +}; + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7312_54x_psu_data *data = as7312_54x_psu_update_device(dev); + u8 status = 0; + + if (attr->index == PSU_PRESENT) { + status = !(data->status >> (1-data->index) & 0x1); + } + else { /* PSU_POWER_GOOD */ + status = (data->status >> (3-data->index) & 0x1); + } + + return sprintf(buf, "%d\n", status); +} + +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7312_54x_psu_data *data = as7312_54x_psu_update_device(dev); + + return sprintf(buf, "%s\n", data->model_name); +} + +static const struct attribute_group as7312_54x_psu_group = { + .attrs = as7312_54x_psu_attributes, +}; + +static int as7312_54x_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7312_54x_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7312_54x_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7312_54x_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7312_54x_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7312_54x_psu_remove(struct i2c_client *client) +{ + struct as7312_54x_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7312_54x_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as7312_54x_psu1, + as7312_54x_psu2 +}; + +static const struct i2c_device_id as7312_54x_psu_id[] = { + { "as7312_54x_psu1", as7312_54x_psu1 }, + { "as7312_54x_psu2", as7312_54x_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7312_54x_psu_id); + +static struct i2c_driver as7312_54x_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7312_54x_psu", + }, + .probe = as7312_54x_psu_probe, + .remove = as7312_54x_psu_remove, + .id_table = as7312_54x_psu_id, + .address_list = normal_i2c, +}; + +static int as7312_54x_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = 0; + int retry_count = 5; + + while (retry_count) { + retry_count--; + + result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) { + msleep(10); + continue; + } + + if (unlikely(result != data_len)) { + result = -EIO; + msleep(10); + continue; + } + + result = 0; + break; + } + + return result; +} + +static struct as7312_54x_psu_data *as7312_54x_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7312_54x_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status; + int power_good = 0; + + dev_dbg(&client->dev, "Starting as7312_54x update\n"); + + /* Read psu status */ + status = as7312_54x_cpld_read(0x60, 0x2); + + if (status < 0) { + dev_dbg(&client->dev, "cpld reg 0x60 err %d\n", status); + } + else { + data->status = status; + } + + /* Read model name */ + memset(data->model_name, 0, sizeof(data->model_name)); + power_good = (data->status >> (3-data->index) & 0x1); + + if (power_good) { + status = as7312_54x_psu_read_block(client, 0x20, data->model_name, + ARRAY_SIZE(data->model_name)-1); + + if (status < 0) { + data->model_name[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x)\n", client->addr); + } + else { + data->model_name[ARRAY_SIZE(data->model_name)-1] = '\0'; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +module_i2c_driver(as7312_54x_psu_driver); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7312_54x_psu driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_sfp.c b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_sfp.c new file mode 100644 index 000000000000..921d9f892cac --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_as7312_54x_sfp.c @@ -0,0 +1,1972 @@ +/* + * SFP driver for accton as7312_54x sfp + * + * Copyright (C) Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "as7312_54x_sfp" /* Platform dependent */ + +#define DEBUG_MODE 0 + +#if (DEBUG_MODE == 1) +#define DEBUG_PRINT(fmt, args...) \ + printk (KERN_INFO "%s:%s[%d]: " fmt "\r\n", __FILE__, __FUNCTION__, __LINE__, ##args) +#else +#define DEBUG_PRINT(fmt, args...) +#endif + +#define NUM_OF_PORT 54 +#define SFP_PORT_MAX 48 +#define EEPROM_NAME "sfp_eeprom" +#define EEPROM_SIZE 256 /* 256 byte eeprom */ +#define BIT_INDEX(i) (1ULL << (i)) +#define USE_I2C_BLOCK_READ 1 /* Platform dependent */ +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ + +#define SFP_EEPROM_A0_I2C_ADDR (0xA0 >> 1) + +#define SFF8024_PHYSICAL_DEVICE_ID_ADDR 0x0 +#define SFF8024_DEVICE_ID_SFP 0x3 +#define SFF8024_DEVICE_ID_QSFP 0xC +#define SFF8024_DEVICE_ID_QSFP_PLUS 0xD +#define SFF8024_DEVICE_ID_QSFP28 0x11 + +#define SFF8472_DIAG_MON_TYPE_ADDR 92 +#define SFF8472_DIAG_MON_TYPE_DDM_MASK 0x40 +#define SFF8436_RX_LOS_ADDR 3 +#define SFF8436_TX_FAULT_ADDR 4 +#define SFF8436_TX_DISABLE_ADDR 86 + +#define MULTIPAGE_SUPPORT 1 + +#if (MULTIPAGE_SUPPORT == 1) +/* fundamental unit of addressing for SFF_8472/SFF_8436 */ +#define SFF_8436_PAGE_SIZE 128 +/* + * The current 8436 (QSFP) spec provides for only 4 supported + * pages (pages 0-3). + * This driver is prepared to support more, but needs a register in the + * EEPROM to indicate how many pages are supported before it is safe + * to implement more pages in the driver. + */ +#define SFF_8436_SPECED_PAGES 4 +#define SFF_8436_EEPROM_SIZE ((1 + SFF_8436_SPECED_PAGES) * SFF_8436_PAGE_SIZE) +#define SFF_8436_EEPROM_UNPAGED_SIZE (2 * SFF_8436_PAGE_SIZE) +/* + * The current 8472 (SFP) spec provides for only 3 supported + * pages (pages 0-2). + * This driver is prepared to support more, but needs a register in the + * EEPROM to indicate how many pages are supported before it is safe + * to implement more pages in the driver. + */ +#define SFF_8472_SPECED_PAGES 3 +#define SFF_8472_EEPROM_SIZE ((3 + SFF_8472_SPECED_PAGES) * SFF_8436_PAGE_SIZE) +#define SFF_8472_EEPROM_UNPAGED_SIZE (4 * SFF_8436_PAGE_SIZE) + +/* a few constants to find our way around the EEPROM */ +#define SFF_8436_PAGE_SELECT_REG 0x7F +#define SFF_8436_PAGEABLE_REG 0x02 +#define SFF_8436_NOT_PAGEABLE (1<<2) +#define SFF_8472_PAGEABLE_REG 0x40 +#define SFF_8472_PAGEABLE (1<<4) + +/* + * This parameter is to help this driver avoid blocking other drivers out + * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C + * clock, one 256 byte read takes about 1/43 second which is excessive; + * but the 1/170 second it takes at 400 kHz may be quite reasonable; and + * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible. + * + * This value is forced to be a power of two so that writes align on pages. + */ +static unsigned io_limit = SFF_8436_PAGE_SIZE; + +/* + * specs often allow 5 msec for a page write, sometimes 20 msec; + * it's important to recover from write timeouts. + */ +static unsigned write_timeout = 25; + +typedef enum qsfp_opcode { + QSFP_READ_OP = 0, + QSFP_WRITE_OP = 1 +} qsfp_opcode_e; +#endif + +/* Platform dependent +++ */ +#define I2C_ADDR_CPLD1 0x60 +#define I2C_ADDR_CPLD2 0x62 +#define I2C_ADDR_CPLD3 0x64 + +#define CPLD3_OFFSET_QSFP_MOD_RST 0x17 +/* Platform dependent --- */ +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_present(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t sfp_show_tx_rx_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t qsfp_show_tx_rx_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t sfp_set_tx_disable(struct device *dev, struct device_attribute *da, const char *buf, size_t count); +static ssize_t qsfp_set_tx_disable(struct device *dev, struct device_attribute *da, const char *buf, size_t count);; +static ssize_t sfp_eeprom_read(struct i2c_client *, u8, u8 *,int); +static ssize_t sfp_eeprom_write(struct i2c_client *, u8 , const char *,int); +static ssize_t get_mode_reset(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); +enum sfp_sysfs_attributes { + PRESENT, + PRESENT_ALL, + PORT_NUMBER, + PORT_TYPE, + DDM_IMPLEMENTED, + TX_FAULT, + TX_FAULT1, + TX_FAULT2, + TX_FAULT3, + TX_FAULT4, + TX_DISABLE, + TX_DISABLE1, + TX_DISABLE2, + TX_DISABLE3, + TX_DISABLE4, + RX_LOS, + RX_LOS1, + RX_LOS2, + RX_LOS3, + RX_LOS4, + RX_LOS_ALL, + SFP_MOD_RST +}; + +/* SFP/QSFP common attributes for sysfs */ +static SENSOR_DEVICE_ATTR(sfp_port_number, S_IRUGO, show_port_number, NULL, PORT_NUMBER); +static SENSOR_DEVICE_ATTR(sfp_is_present, S_IRUGO, show_present, NULL, PRESENT); +static SENSOR_DEVICE_ATTR(sfp_is_present_all, S_IRUGO, show_present, NULL, PRESENT_ALL); +static SENSOR_DEVICE_ATTR(sfp_rx_los, S_IRUGO, sfp_show_tx_rx_status, NULL, RX_LOS); +static SENSOR_DEVICE_ATTR(sfp_tx_disable, S_IWUSR | S_IRUGO, sfp_show_tx_rx_status, sfp_set_tx_disable, TX_DISABLE); +static SENSOR_DEVICE_ATTR(sfp_tx_fault, S_IRUGO, sfp_show_tx_rx_status, NULL, TX_FAULT); + +/* QSFP attributes for sysfs */ +static SENSOR_DEVICE_ATTR(sfp_rx_los1, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS1); +static SENSOR_DEVICE_ATTR(sfp_rx_los2, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS2); +static SENSOR_DEVICE_ATTR(sfp_rx_los3, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS3); +static SENSOR_DEVICE_ATTR(sfp_rx_los4, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS4); +static SENSOR_DEVICE_ATTR(sfp_tx_disable1, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE1); +static SENSOR_DEVICE_ATTR(sfp_tx_disable2, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE2); +static SENSOR_DEVICE_ATTR(sfp_tx_disable3, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE3); +static SENSOR_DEVICE_ATTR(sfp_tx_disable4, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE4); +static SENSOR_DEVICE_ATTR(sfp_tx_fault1, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT1); +static SENSOR_DEVICE_ATTR(sfp_tx_fault2, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT2); +static SENSOR_DEVICE_ATTR(sfp_tx_fault3, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT3); +static SENSOR_DEVICE_ATTR(sfp_tx_fault4, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT4); +static SENSOR_DEVICE_ATTR(sfp_mod_rst, S_IWUSR | S_IRUGO, get_mode_reset, set_mode_reset, SFP_MOD_RST); + +static struct attribute *qsfp_attributes[] = { + &sensor_dev_attr_sfp_port_number.dev_attr.attr, + &sensor_dev_attr_sfp_is_present.dev_attr.attr, + &sensor_dev_attr_sfp_is_present_all.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los1.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los2.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los3.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los4.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable1.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable2.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable3.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable4.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault1.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault2.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault3.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault4.dev_attr.attr, + &sensor_dev_attr_sfp_mod_rst.dev_attr.attr, + NULL +}; + +/* SFP msa attributes for sysfs */ +static SENSOR_DEVICE_ATTR(sfp_rx_los_all, S_IRUGO, sfp_show_tx_rx_status, NULL, RX_LOS_ALL); +static struct attribute *sfp_msa_attributes[] = { + &sensor_dev_attr_sfp_port_number.dev_attr.attr, + &sensor_dev_attr_sfp_is_present.dev_attr.attr, + &sensor_dev_attr_sfp_is_present_all.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los_all.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable.dev_attr.attr, + NULL +}; + +/* Platform dependent +++ */ +#define CPLD_PORT_TO_FRONT_PORT(port) (port+1) + +enum port_numbers { + as7312_54x_port1, as7312_54x_port2, as7312_54x_port3, as7312_54x_port4, + as7312_54x_port5, as7312_54x_port6, as7312_54x_port7, as7312_54x_port8, + as7312_54x_port9, as7312_54x_port10, as7312_54x_port11, as7312_54x_port12, + as7312_54x_port13, as7312_54x_port14, as7312_54x_port15, as7312_54x_port16, + as7312_54x_port17, as7312_54x_port18, as7312_54x_port19, as7312_54x_port20, + as7312_54x_port21, as7312_54x_port22, as7312_54x_port23, as7312_54x_port24, + as7312_54x_port25, as7312_54x_port26, as7312_54x_port27, as7312_54x_port28, + as7312_54x_port29, as7312_54x_port30, as7312_54x_port31, as7312_54x_port32, + as7312_54x_port33, as7312_54x_port34, as7312_54x_port35, as7312_54x_port36, + as7312_54x_port37, as7312_54x_port38, as7312_54x_port39, as7312_54x_port40, + as7312_54x_port41, as7312_54x_port42, as7312_54x_port43, as7312_54x_port44, + as7312_54x_port45, as7312_54x_port46, as7312_54x_port47, as7312_54x_port48, + as7312_54x_port49, as7312_54x_port52, as7312_54x_port50, as7312_54x_port53, + as7312_54x_port51, as7312_54x_port54 +}; + +#define I2C_DEV_ID(x) { #x, x} + +static const struct i2c_device_id sfp_device_id[] = { + I2C_DEV_ID(as7312_54x_port1), + I2C_DEV_ID(as7312_54x_port2), + I2C_DEV_ID(as7312_54x_port3), + I2C_DEV_ID(as7312_54x_port4), + I2C_DEV_ID(as7312_54x_port5), + I2C_DEV_ID(as7312_54x_port6), + I2C_DEV_ID(as7312_54x_port7), + I2C_DEV_ID(as7312_54x_port8), + I2C_DEV_ID(as7312_54x_port9), + I2C_DEV_ID(as7312_54x_port10), + I2C_DEV_ID(as7312_54x_port11), + I2C_DEV_ID(as7312_54x_port12), + I2C_DEV_ID(as7312_54x_port13), + I2C_DEV_ID(as7312_54x_port14), + I2C_DEV_ID(as7312_54x_port15), + I2C_DEV_ID(as7312_54x_port16), + I2C_DEV_ID(as7312_54x_port17), + I2C_DEV_ID(as7312_54x_port18), + I2C_DEV_ID(as7312_54x_port19), + I2C_DEV_ID(as7312_54x_port20), + I2C_DEV_ID(as7312_54x_port21), + I2C_DEV_ID(as7312_54x_port22), + I2C_DEV_ID(as7312_54x_port23), + I2C_DEV_ID(as7312_54x_port24), + I2C_DEV_ID(as7312_54x_port25), + I2C_DEV_ID(as7312_54x_port26), + I2C_DEV_ID(as7312_54x_port27), + I2C_DEV_ID(as7312_54x_port28), + I2C_DEV_ID(as7312_54x_port29), + I2C_DEV_ID(as7312_54x_port30), + I2C_DEV_ID(as7312_54x_port31), + I2C_DEV_ID(as7312_54x_port32), + I2C_DEV_ID(as7312_54x_port33), + I2C_DEV_ID(as7312_54x_port34), + I2C_DEV_ID(as7312_54x_port35), + I2C_DEV_ID(as7312_54x_port36), + I2C_DEV_ID(as7312_54x_port37), + I2C_DEV_ID(as7312_54x_port38), + I2C_DEV_ID(as7312_54x_port39), + I2C_DEV_ID(as7312_54x_port40), + I2C_DEV_ID(as7312_54x_port41), + I2C_DEV_ID(as7312_54x_port42), + I2C_DEV_ID(as7312_54x_port43), + I2C_DEV_ID(as7312_54x_port44), + I2C_DEV_ID(as7312_54x_port45), + I2C_DEV_ID(as7312_54x_port46), + I2C_DEV_ID(as7312_54x_port47), + I2C_DEV_ID(as7312_54x_port48), + I2C_DEV_ID(as7312_54x_port49), + I2C_DEV_ID(as7312_54x_port50), + I2C_DEV_ID(as7312_54x_port51), + I2C_DEV_ID(as7312_54x_port52), + I2C_DEV_ID(as7312_54x_port53), + I2C_DEV_ID(as7312_54x_port54), + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, sfp_device_id); +/* Platform dependent --- */ + +enum driver_type_e { + DRIVER_TYPE_SFP_MSA, + DRIVER_TYPE_QSFP +}; + +/* Each client has this additional data + */ +struct eeprom_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + struct bin_attribute bin; /* eeprom data */ +}; + +struct sfp_msa_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u64 status[6]; /* bit0:port0, bit1:port1 and so on */ + /* index 0 => tx_fail + 1 => tx_disable + 2 => rx_loss + 3 => device id + 4 => 10G Ethernet Compliance Codes + to distinguish SFP or SFP+ + 5 => DIAGNOSTIC MONITORING TYPE */ + struct eeprom_data eeprom; +#if (MULTIPAGE_SUPPORT == 1) + struct i2c_client *ddm_client; /* dummy client instance for 0xA2 */ +#endif +}; + +struct qsfp_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 status[3]; /* bit0:port0, bit1:port1 and so on */ + /* index 0 => tx_fail + 1 => tx_disable + 2 => rx_loss */ + + u8 device_id; + struct eeprom_data eeprom; +}; + +struct sfp_port_data { + struct mutex update_lock; + enum driver_type_e driver_type; + int port; /* CPLD port index */ + u64 present; /* present status, bit0:port0, bit1:port1 and so on */ + + struct sfp_msa_data *msa; + struct qsfp_data *qsfp; + + struct i2c_client *client; +#if (MULTIPAGE_SUPPORT == 1) + int use_smbus; + u8 *writebuf; + unsigned write_max; +#endif +}; + +#if (MULTIPAGE_SUPPORT == 1) +static ssize_t sfp_port_read_write(struct sfp_port_data *port_data, + char *buf, loff_t off, size_t len, qsfp_opcode_e opcode); +#endif +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + return sprintf(buf, "%d\n", CPLD_PORT_TO_FRONT_PORT(data->port)); +} + +/* Platform dependent +++ */ +static struct sfp_port_data *sfp_update_present(struct i2c_client *client) +{ + int i = 0, j = 0, status = -1; + u8 reg; + unsigned short cpld_addr; + struct sfp_port_data *data = i2c_get_clientdata(client); + + DEBUG_PRINT("Starting sfp present status update"); + mutex_lock(&data->update_lock); + data->present = 0; + + /* Read present status of port 1~48(SFP port) */ + for (i = 0; i < 2; i++) { + for (j = 0; j < 3; j++) { + cpld_addr = I2C_ADDR_CPLD2 + i*2; + reg = 0x9+j; + status = accton_i2c_cpld_read(cpld_addr, reg); + + if (unlikely(status < 0)) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", cpld_addr, reg, status); + goto exit; + } + + DEBUG_PRINT("Present status = 0x%lx\r\n", data->present); + data->present |= (u64)status << ((i*24) + (j%3)*8); + } + } + + /* Read present status of port 49-52(QSFP port) */ + cpld_addr = I2C_ADDR_CPLD2; + reg = 0x18; + status = accton_i2c_cpld_read(cpld_addr, reg); + + if (unlikely(status < 0)) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", cpld_addr, reg, status); + goto exit; + } + else { + data->present |= (u64)(status & 0xF) << SFP_PORT_MAX; + } + + /* Read present status of port 53-54(QSFP port) */ + cpld_addr = I2C_ADDR_CPLD3; + reg = 0x18; + status = accton_i2c_cpld_read(cpld_addr, reg); + + if (unlikely(status < 0)) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", cpld_addr, reg, status); + goto exit; + } + else { + data->present |= (u64)(status & 0x3) << 52; + } + + DEBUG_PRINT("Present status = 0x%lx", data->present); +exit: + mutex_unlock(&data->update_lock); + return (status < 0) ? ERR_PTR(status) : data; +} + +static struct sfp_port_data* sfp_update_tx_rx_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + int i = 0, j = 0; + int status = -1; + + if (time_before(jiffies, data->msa->last_updated + HZ + HZ / 2) && data->msa->valid) { + return data; + } + + DEBUG_PRINT("Starting as7312_54x sfp tx rx status update"); + mutex_lock(&data->update_lock); + data->msa->valid = 0; + memset(data->msa->status, 0, sizeof(data->msa->status)); + + /* Read status of port 1~48(SFP port) */ + for (i = 0; i < 2; i++) { + for (j = 0; j < 9; j++) { + u8 reg; + unsigned short cpld_addr; + reg = 0xc+j; + cpld_addr = I2C_ADDR_CPLD2 + i*2; + + status = accton_i2c_cpld_read(cpld_addr, reg); + if (unlikely(status < 0)) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", cpld_addr, reg, status); + goto exit; + } + + data->msa->status[j/3] |= (u64)status << ((i*24) + (j%3)*8); + } + } + + data->msa->valid = 1; + data->msa->last_updated = jiffies; + +exit: + mutex_unlock(&data->update_lock); + return (status < 0) ? ERR_PTR(status) : data; +} + +static ssize_t sfp_set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + unsigned short cpld_addr = 0; + u8 cpld_reg = 0, cpld_val = 0, cpld_bit = 0; + long disable; + int error; + + if (data->driver_type == DRIVER_TYPE_QSFP) { + return qsfp_set_tx_disable(dev, da, buf, count); + } + + error = kstrtol(buf, 10, &disable); + if (error) { + return error; + } + + mutex_lock(&data->update_lock); + + if(data->port < 24) { + cpld_addr = I2C_ADDR_CPLD2; + cpld_reg = 0xF + data->port / 8; + cpld_bit = 1 << (data->port % 8); + } + else { /* port 24 ~ 48 */ + cpld_addr = I2C_ADDR_CPLD3; + cpld_reg = 0xF + (data->port - 24) / 8; + cpld_bit = 1 << (data->port % 8); + } + + /* Read current status */ + cpld_val = accton_i2c_cpld_read(cpld_addr, cpld_reg); + + /* Update tx_disable status */ + if (disable) { + data->msa->status[1] |= BIT_INDEX(data->port); + cpld_val |= cpld_bit; + } + else { + data->msa->status[1] &= ~BIT_INDEX(data->port); + cpld_val &= ~cpld_bit; + } + + accton_i2c_cpld_write(cpld_addr, cpld_reg, cpld_val); + mutex_unlock(&data->update_lock); + return count; +} + +static int sfp_is_port_present(struct i2c_client *client, int port) +{ + struct sfp_port_data *data = i2c_get_clientdata(client); + + data = sfp_update_present(client); + if (IS_ERR(data)) { + return PTR_ERR(data); + } + + return (data->present & BIT_INDEX(data->port)) ? 0 : 1; /* Platform dependent */ +} + +/* Platform dependent +++ */ +static ssize_t show_present(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + + if (PRESENT_ALL == attr->index) { + int i; + u8 values[7] = {0}; + struct sfp_port_data *data = sfp_update_present(client); + + if (IS_ERR(data)) { + return PTR_ERR(data); + } + + for (i = 0; i < ARRAY_SIZE(values); i++) { + values[i] = ~(u8)(data->present >> (i * 8)); + } + + /* Return values 1 -> 54 in order */ + return sprintf(buf, "%.2x %.2x %.2x %.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], + values[3], values[4], values[5], + values[6] & 0x3F); + } + else { + struct sfp_port_data *data = i2c_get_clientdata(client); + int present = sfp_is_port_present(client, data->port); + + if (IS_ERR_VALUE(present)) { + return present; + } + + /* PRESENT */ + return sprintf(buf, "%d\n", present); + } +} +/* Platform dependent --- */ + +static struct sfp_port_data *qsfp_update_tx_rx_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + int i, status = -1; + u8 buf = 0; + u8 reg[] = {SFF8436_TX_FAULT_ADDR, SFF8436_TX_DISABLE_ADDR, SFF8436_RX_LOS_ADDR}; + + if (time_before(jiffies, data->qsfp->last_updated + HZ + HZ / 2) && data->qsfp->valid) { + return data; + } + + DEBUG_PRINT("Starting sfp tx rx status update"); + mutex_lock(&data->update_lock); + data->qsfp->valid = 0; + memset(data->qsfp->status, 0, sizeof(data->qsfp->status)); + + /* Notify device to update tx fault/ tx disable/ rx los status */ + for (i = 0; i < ARRAY_SIZE(reg); i++) { + status = sfp_eeprom_read(client, reg[i], &buf, sizeof(buf)); + if (unlikely(status < 0)) { + goto exit; + } + } + msleep(200); + + /* Read actual tx fault/ tx disable/ rx los status */ + for (i = 0; i < ARRAY_SIZE(reg); i++) { + status = sfp_eeprom_read(client, reg[i], &buf, sizeof(buf)); + if (unlikely(status < 0)) { + goto exit; + } + + DEBUG_PRINT("qsfp reg(0x%x) status = (0x%x)", reg[i], data->qsfp->status[i]); + data->qsfp->status[i] = (buf & 0xF); + } + + data->qsfp->valid = 1; + data->qsfp->last_updated = jiffies; + +exit: + mutex_unlock(&data->update_lock); + return (status < 0) ? ERR_PTR(status) : data; +} + +static ssize_t get_mode_reset(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + u8 cpld_val = 0; + int port_bit; + int status = -EINVAL; + u8 cpld_addr[] = {I2C_ADDR_CPLD2, I2C_ADDR_CPLD3}; + + /* Low power mode is not supported for SFP ports(1-48) */ + if (data->port < SFP_PORT_MAX) { + return -EINVAL; + } + mutex_lock(&data->update_lock); + + port_bit = data->port - SFP_PORT_MAX; + cpld_val = accton_i2c_cpld_read(cpld_addr[port_bit/4], CPLD3_OFFSET_QSFP_MOD_RST); + + pr_err("[ROY]%s#%d, %x from %x\n", __func__, __LINE__, cpld_val, cpld_addr[port_bit/4]); + + cpld_val = cpld_val & 0x0F; + cpld_val = cpld_val & BIT_INDEX(port_bit%4); + + pr_err("[ROY]%s#%d, %x of bit %d\n", __func__, __LINE__, cpld_val, port_bit); + + status = snprintf(buf, PAGE_SIZE - 1, "%d\r\n", cpld_val>>(port_bit%4)); + + mutex_unlock(&data->update_lock); + + return status; +} + +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + u8 cpld_val = 0; + long reset; + int error, port_bit; + u8 cpld_addr[] = {I2C_ADDR_CPLD2, I2C_ADDR_CPLD3}; + + pr_err("[ROY]%s#%d, port:%d\n", __func__, __LINE__, data->port); + + /* Tx disable is not supported for QSFP ports(49-54) */ + if (data->port < SFP_PORT_MAX) { + return -EINVAL; + } + port_bit = data->port - SFP_PORT_MAX; + error = kstrtol(buf, 10, &reset); + + pr_err("[ROY]%s#%d, %s == %d\n", __func__, __LINE__, buf, error); + if (error) { + return error; + } + mutex_lock(&data->update_lock); + + cpld_val = accton_i2c_cpld_read(cpld_addr[port_bit/4], CPLD3_OFFSET_QSFP_MOD_RST); + pr_err("[ROY]%s#%d, %x\n", __func__, __LINE__, cpld_val); + /* Update lp_mode status */ + if (reset) + { + cpld_val |= BIT_INDEX(port_bit%4); + } + else + { + cpld_val &= ~BIT_INDEX(port_bit%4); + } + pr_err("[ROY]%s#%d, %x to %x\n", __func__, __LINE__, cpld_val, cpld_addr[port_bit/4]); + + accton_i2c_cpld_write(cpld_addr[port_bit/4], CPLD3_OFFSET_QSFP_MOD_RST, cpld_val); + + mutex_unlock(&data->update_lock); + + return count; +} +static ssize_t qsfp_show_tx_rx_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + int present; + u8 val = 0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + + present = sfp_is_port_present(client, data->port); + if (IS_ERR_VALUE(present)) { + return present; + } + + if (present == 0) { + /* port is not present */ + return -ENXIO; + } + + data = qsfp_update_tx_rx_status(dev); + if (IS_ERR(data)) { + return PTR_ERR(data); + } + + switch (attr->index) { + case TX_FAULT: + val = !!(data->qsfp->status[2] & 0xF); + break; + case TX_FAULT1: + case TX_FAULT2: + case TX_FAULT3: + case TX_FAULT4: + val = !!(data->qsfp->status[2] & BIT_INDEX(attr->index - TX_FAULT1)); + break; + case TX_DISABLE: + val = data->qsfp->status[1] & 0xF; + break; + case TX_DISABLE1: + case TX_DISABLE2: + case TX_DISABLE3: + case TX_DISABLE4: + val = !!(data->qsfp->status[1] & BIT_INDEX(attr->index - TX_DISABLE1)); + break; + case RX_LOS: + val = !!(data->qsfp->status[0] & 0xF); + break; + case RX_LOS1: + case RX_LOS2: + case RX_LOS3: + case RX_LOS4: + val = !!(data->qsfp->status[0] & BIT_INDEX(attr->index - RX_LOS1)); + break; + default: + break; + } + + return sprintf(buf, "%d\n", val); +} + +static ssize_t qsfp_set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + long disable; + int status; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + + status = sfp_is_port_present(client, data->port); + if (IS_ERR_VALUE(status)) { + return status; + } + + if (!status) { + /* port is not present */ + return -ENXIO; + } + + status = kstrtol(buf, 10, &disable); + if (status) { + return status; + } + + data = qsfp_update_tx_rx_status(dev); + if (IS_ERR(data)) { + return PTR_ERR(data); + } + + mutex_lock(&data->update_lock); + + if (attr->index == TX_DISABLE) { + if (disable) { + data->qsfp->status[1] |= 0xF; + } + else { + data->qsfp->status[1] &= ~0xF; + } + } + else {/* TX_DISABLE1 ~ TX_DISABLE4*/ + if (disable) { + data->qsfp->status[1] |= (1 << (attr->index - TX_DISABLE1)); + } + else { + data->qsfp->status[1] &= ~(1 << (attr->index - TX_DISABLE1)); + } + } + + DEBUG_PRINT("index = (%d), status = (0x%x)", attr->index, data->qsfp->status[1]); + status = sfp_eeprom_write(data->client, SFF8436_TX_DISABLE_ADDR, &data->qsfp->status[1], sizeof(data->qsfp->status[1])); + if (unlikely(status < 0)) { + count = status; + } + + mutex_unlock(&data->update_lock); + return count; +} + +/* Platform dependent +++ */ +static ssize_t sfp_show_tx_rx_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + u8 val = 0, index = 0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + + if (data->driver_type == DRIVER_TYPE_QSFP) { + return qsfp_show_tx_rx_status(dev, da, buf); + } + + data = sfp_update_tx_rx_status(dev); + if (IS_ERR(data)) { + return PTR_ERR(data); + } + + if(attr->index == RX_LOS_ALL) { + int i = 0; + u8 values[6] = {0}; + + for (i = 0; i < ARRAY_SIZE(values); i++) { + values[i] = (u8)(data->msa->status[2] >> (i * 8)); + } + + /** Return values 1 -> 48 in order */ + return sprintf(buf, "%.2x %.2x %.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], + values[3], values[4], values[5]); + } + + switch (attr->index) { + case TX_FAULT: + index = 0; + break; + case TX_DISABLE: + index = 1; + break; + case RX_LOS: + index = 2; + break; + default: + return 0; + } + + val = (data->msa->status[index] & BIT_INDEX(data->port)) ? 1 : 0; + return sprintf(buf, "%d\n", val); +} +/* Platform dependent --- */ +static ssize_t sfp_eeprom_write(struct i2c_client *client, u8 command, const char *data, + int data_len) +{ +#if USE_I2C_BLOCK_READ + int status, retry = I2C_RW_RETRY_COUNT; + + if (data_len > I2C_SMBUS_BLOCK_MAX) { + data_len = I2C_SMBUS_BLOCK_MAX; + } + + while (retry) { + status = i2c_smbus_write_i2c_block_data(client, command, data_len, data); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(status < 0)) { + return status; + } + + return data_len; +#else + int status, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, command, *data); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(status < 0)) { + return status; + } + + return 1; +#endif + + +} + +#if (MULTIPAGE_SUPPORT == 0) +static ssize_t sfp_port_write(struct sfp_port_data *data, + const char *buf, loff_t off, size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) { + return count; + } + + /* + * Write data to chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&data->update_lock); + + while (count) { + ssize_t status; + + status = sfp_eeprom_write(data->client, off, buf, count); + if (status <= 0) { + if (retval == 0) { + retval = status; + } + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&data->update_lock); + return retval; +} +#endif + +static ssize_t sfp_bin_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + int present; + struct sfp_port_data *data; + DEBUG_PRINT("%s(%d) offset = (%d), count = (%d)", off, count); + data = dev_get_drvdata(container_of(kobj, struct device, kobj)); + + present = sfp_is_port_present(data->client, data->port); + if (IS_ERR_VALUE(present)) { + return present; + } + + if (present == 0) { + /* port is not present */ + return -ENODEV; + } + +#if (MULTIPAGE_SUPPORT == 1) + return sfp_port_read_write(data, buf, off, count, QSFP_WRITE_OP); +#else + return sfp_port_write(data, buf, off, count); +#endif +} + +static ssize_t sfp_eeprom_read(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ +#if USE_I2C_BLOCK_READ + int status, retry = I2C_RW_RETRY_COUNT; + + if (data_len > I2C_SMBUS_BLOCK_MAX) { + data_len = I2C_SMBUS_BLOCK_MAX; + } + + while (retry) { + status = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(status < 0)) { + goto abort; + } + if (unlikely(status != data_len)) { + status = -EIO; + goto abort; + } + + //result = data_len; + +abort: + return status; +#else + int status, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, command); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(status < 0)) { + dev_dbg(&client->dev, "sfp read byte data failed, command(0x%2x), data(0x%2x)\r\n", command, status); + goto abort; + } + + *data = (u8)status; + status = 1; + +abort: + return status; +#endif +} + +#if (MULTIPAGE_SUPPORT == 1) +/*-------------------------------------------------------------------------*/ +/* + * This routine computes the addressing information to be used for + * a given r/w request. + * + * Task is to calculate the client (0 = i2c addr 50, 1 = i2c addr 51), + * the page, and the offset. + * + * Handles both SFP and QSFP. + * For SFP, offset 0-255 are on client[0], >255 is on client[1] + * Offset 256-383 are on the lower half of client[1] + * Pages are accessible on the upper half of client[1]. + * Offset >383 are in 128 byte pages mapped into the upper half + * + * For QSFP, all offsets are on client[0] + * offset 0-127 are on the lower half of client[0] (no paging) + * Pages are accessible on the upper half of client[1]. + * Offset >127 are in 128 byte pages mapped into the upper half + * + * Callers must not read/write beyond the end of a client or a page + * without recomputing the client/page. Hence offset (within page) + * plus length must be less than or equal to 128. (Note that this + * routine does not have access to the length of the call, hence + * cannot do the validity check.) + * + * Offset within Lower Page 00h and Upper Page 00h are not recomputed + */ +static uint8_t sff_8436_translate_offset(struct sfp_port_data *port_data, + loff_t *offset, struct i2c_client **client) +{ + unsigned page = 0; + + *client = port_data->client; + + /* if SFP style, offset > 255, shift to i2c addr 0x51 */ + if (port_data->driver_type == DRIVER_TYPE_SFP_MSA) { + if (*offset > 255) { + /* like QSFP, but shifted to client[1] */ + *client = port_data->msa->ddm_client; + *offset -= 256; + } + } + + /* + * if offset is in the range 0-128... + * page doesn't matter (using lower half), return 0. + * offset is already correct (don't add 128 to get to paged area) + */ + if (*offset < SFF_8436_PAGE_SIZE) + return page; + + /* note, page will always be positive since *offset >= 128 */ + page = (*offset >> 7)-1; + /* 0x80 places the offset in the top half, offset is last 7 bits */ + *offset = SFF_8436_PAGE_SIZE + (*offset & 0x7f); + + return page; /* note also returning client and offset */ +} + +static ssize_t sff_8436_eeprom_read(struct sfp_port_data *port_data, + struct i2c_client *client, + char *buf, unsigned offset, size_t count) +{ + struct i2c_msg msg[2]; + u8 msgbuf[2]; + unsigned long timeout, read_time; + int status, i; + + memset(msg, 0, sizeof(msg)); + + switch (port_data->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + /*smaller eeproms can work given some SMBus extension calls */ + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + break; + case I2C_SMBUS_WORD_DATA: + /* Check for odd length transaction */ + count = (count == 1) ? 1 : 2; + break; + case I2C_SMBUS_BYTE_DATA: + count = 1; + break; + default: + /* + * When we have a better choice than SMBus calls, use a + * combined I2C message. Write address; then read up to + * io_limit data bytes. msgbuf is u8 and will cast to our + * needs. + */ + i = 0; + msgbuf[i++] = offset; + + msg[0].addr = client->addr; + msg[0].buf = msgbuf; + msg[0].len = i; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + } + + /* + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + read_time = jiffies; + + switch (port_data->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + status = i2c_smbus_read_i2c_block_data(client, offset, + count, buf); + break; + case I2C_SMBUS_WORD_DATA: + status = i2c_smbus_read_word_data(client, offset); + if (status >= 0) { + buf[0] = status & 0xff; + if (count == 2) + buf[1] = status >> 8; + status = count; + } + break; + case I2C_SMBUS_BYTE_DATA: + status = i2c_smbus_read_byte_data(client, offset); + if (status >= 0) { + buf[0] = status; + status = count; + } + break; + default: + status = i2c_transfer(client->adapter, msg, 2); + if (status == 2) + status = count; + } + + dev_dbg(&client->dev, "eeprom read %zu@%d --> %d (%ld)\n", + count, offset, status, jiffies); + + if (status == count) /* happy path */ + return count; + + if (status == -ENXIO) /* no module present */ + return status; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(read_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t sff_8436_eeprom_write(struct sfp_port_data *port_data, + struct i2c_client *client, + const char *buf, + unsigned offset, size_t count) +{ + struct i2c_msg msg; + ssize_t status; + unsigned long timeout, write_time; + unsigned next_page_start; + int i = 0; + + /* write max is at most a page + * (In this driver, write_max is actually one byte!) + */ + if (count > port_data->write_max) + count = port_data->write_max; + + /* shorten count if necessary to avoid crossing page boundary */ + next_page_start = roundup(offset + 1, SFF_8436_PAGE_SIZE); + if (offset + count > next_page_start) + count = next_page_start - offset; + + switch (port_data->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + /*smaller eeproms can work given some SMBus extension calls */ + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + break; + case I2C_SMBUS_WORD_DATA: + /* Check for odd length transaction */ + count = (count == 1) ? 1 : 2; + break; + case I2C_SMBUS_BYTE_DATA: + count = 1; + break; + default: + /* If we'll use I2C calls for I/O, set up the message */ + msg.addr = client->addr; + msg.flags = 0; + + /* msg.buf is u8 and casts will mask the values */ + msg.buf = port_data->writebuf; + + msg.buf[i++] = offset; + memcpy(&msg.buf[i], buf, count); + msg.len = i + count; + break; + } + + /* + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + write_time = jiffies; + + switch (port_data->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + status = i2c_smbus_write_i2c_block_data(client, + offset, count, buf); + if (status == 0) + status = count; + break; + case I2C_SMBUS_WORD_DATA: + if (count == 2) { + status = i2c_smbus_write_word_data(client, + offset, (u16)((buf[0])|(buf[1] << 8))); + } else { + /* count = 1 */ + status = i2c_smbus_write_byte_data(client, + offset, buf[0]); + } + if (status == 0) + status = count; + break; + case I2C_SMBUS_BYTE_DATA: + status = i2c_smbus_write_byte_data(client, offset, + buf[0]); + if (status == 0) + status = count; + break; + default: + status = i2c_transfer(client->adapter, &msg, 1); + if (status == 1) + status = count; + break; + } + + dev_dbg(&client->dev, "eeprom write %zu@%d --> %ld (%lu)\n", + count, offset, (long int) status, jiffies); + + if (status == count) + return count; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(write_time, timeout)); + + return -ETIMEDOUT; +} + + +static ssize_t sff_8436_eeprom_update_client(struct sfp_port_data *port_data, + char *buf, loff_t off, + size_t count, qsfp_opcode_e opcode) +{ + struct i2c_client *client; + ssize_t retval = 0; + u8 page = 0; + loff_t phy_offset = off; + int ret = 0; + + page = sff_8436_translate_offset(port_data, &phy_offset, &client); + + dev_dbg(&client->dev, + "sff_8436_eeprom_update_client off %lld page:%d phy_offset:%lld, count:%ld, opcode:%d\n", + off, page, phy_offset, (long int) count, opcode); + if (page > 0) { + ret = sff_8436_eeprom_write(port_data, client, &page, + SFF_8436_PAGE_SELECT_REG, 1); + if (ret < 0) { + dev_dbg(&client->dev, + "Write page register for page %d failed ret:%d!\n", + page, ret); + return ret; + } + } + + while (count) { + ssize_t status; + + if (opcode == QSFP_READ_OP) { + status = sff_8436_eeprom_read(port_data, client, + buf, phy_offset, count); + } else { + status = sff_8436_eeprom_write(port_data, client, + buf, phy_offset, count); + } + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + phy_offset += status; + count -= status; + retval += status; + } + + + if (page > 0) { + /* return the page register to page 0 (why?) */ + page = 0; + ret = sff_8436_eeprom_write(port_data, client, &page, + SFF_8436_PAGE_SELECT_REG, 1); + if (ret < 0) { + dev_err(&client->dev, + "Restore page register to page %d failed ret:%d!\n", + page, ret); + return ret; + } + } + return retval; +} + + +/* + * Figure out if this access is within the range of supported pages. + * Note this is called on every access because we don't know if the + * module has been replaced since the last call. + * If/when modules support more pages, this is the routine to update + * to validate and allow access to additional pages. + * + * Returns updated len for this access: + * - entire access is legal, original len is returned. + * - access begins legal but is too long, len is truncated to fit. + * - initial offset exceeds supported pages, return -EINVAL + */ +static ssize_t sff_8436_page_legal(struct sfp_port_data *port_data, + loff_t off, size_t len) +{ + struct i2c_client *client = port_data->client; + u8 regval; + int status; + size_t maxlen; + + if (off < 0) return -EINVAL; + if (port_data->driver_type == DRIVER_TYPE_SFP_MSA) { + /* SFP case */ + if ((off + len) <= 256) return len; + /* if no pages needed, we're good */ + //if ((off + len) <= SFF_8472_EEPROM_UNPAGED_SIZE) return len; + /* if offset exceeds possible pages, we're not good */ + if (off >= SFF_8472_EEPROM_SIZE) return -EINVAL; + + /* Check if ddm is supported */ + status = sff_8436_eeprom_read(port_data, client, ®val, + SFF8472_DIAG_MON_TYPE_ADDR, 1); + if (status < 0) return status; /* error out (no module?) */ + if (!(regval & SFF8472_DIAG_MON_TYPE_DDM_MASK)) { + if (off >= 256) return -EINVAL; + maxlen = 256 - off; + } + else { + /* in between, are pages supported? */ + status = sff_8436_eeprom_read(port_data, client, ®val, + SFF_8472_PAGEABLE_REG, 1); + if (status < 0) return status; /* error out (no module?) */ + if (regval & SFF_8472_PAGEABLE) { + /* Pages supported, trim len to the end of pages */ + maxlen = SFF_8472_EEPROM_SIZE - off; + } else { + /* pages not supported, trim len to unpaged size */ + if (off >= SFF_8472_EEPROM_UNPAGED_SIZE) return -EINVAL; + maxlen = SFF_8472_EEPROM_UNPAGED_SIZE - off; + } + } + len = (len > maxlen) ? maxlen : len; + dev_dbg(&client->dev, + "page_legal, SFP, off %lld len %ld\n", + off, (long int) len); + } + else if (port_data->driver_type == DRIVER_TYPE_QSFP) { + /* QSFP case */ + /* if no pages needed, we're good */ + if ((off + len) <= SFF_8436_EEPROM_UNPAGED_SIZE) return len; + /* if offset exceeds possible pages, we're not good */ + if (off >= SFF_8436_EEPROM_SIZE) return -EINVAL; + /* in between, are pages supported? */ + status = sff_8436_eeprom_read(port_data, client, ®val, + SFF_8436_PAGEABLE_REG, 1); + if (status < 0) return status; /* error out (no module?) */ + if (regval & SFF_8436_NOT_PAGEABLE) { + /* pages not supported, trim len to unpaged size */ + if (off >= SFF_8436_EEPROM_UNPAGED_SIZE) return -EINVAL; + maxlen = SFF_8436_EEPROM_UNPAGED_SIZE - off; + } else { + /* Pages supported, trim len to the end of pages */ + maxlen = SFF_8436_EEPROM_SIZE - off; + } + len = (len > maxlen) ? maxlen : len; + dev_dbg(&client->dev, + "page_legal, QSFP, off %lld len %ld\n", + off, (long int) len); + } + else { + return -EINVAL; + } + return len; +} + + +static ssize_t sfp_port_read_write(struct sfp_port_data *port_data, + char *buf, loff_t off, size_t len, qsfp_opcode_e opcode) +{ + struct i2c_client *client = port_data->client; + int chunk; + int status = 0; + ssize_t retval; + size_t pending_len = 0, chunk_len = 0; + loff_t chunk_offset = 0, chunk_start_offset = 0; + + if (unlikely(!len)) + return len; + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&port_data->update_lock); + + /* + * Confirm this access fits within the device suppored addr range + */ + len = sff_8436_page_legal(port_data, off, len); + if (len < 0) { + status = len; + goto err; + } + + /* + * For each (128 byte) chunk involved in this request, issue a + * separate call to sff_eeprom_update_client(), to + * ensure that each access recalculates the client/page + * and writes the page register as needed. + * Note that chunk to page mapping is confusing, is different for + * QSFP and SFP, and never needs to be done. Don't try! + */ + pending_len = len; /* amount remaining to transfer */ + retval = 0; /* amount transferred */ + for (chunk = off >> 7; chunk <= (off + len - 1) >> 7; chunk++) { + + /* + * Compute the offset and number of bytes to be read/write + * + * 1. start at offset 0 (within the chunk), and read/write + * the entire chunk + * 2. start at offset 0 (within the chunk) and read/write less + * than entire chunk + * 3. start at an offset not equal to 0 and read/write the rest + * of the chunk + * 4. start at an offset not equal to 0 and read/write less than + * (end of chunk - offset) + */ + chunk_start_offset = chunk * SFF_8436_PAGE_SIZE; + + if (chunk_start_offset < off) { + chunk_offset = off; + if ((off + pending_len) < (chunk_start_offset + + SFF_8436_PAGE_SIZE)) + chunk_len = pending_len; + else + chunk_len = (chunk+1)*SFF_8436_PAGE_SIZE - off;/*SFF_8436_PAGE_SIZE - off;*/ + } else { + chunk_offset = chunk_start_offset; + if (pending_len > SFF_8436_PAGE_SIZE) + chunk_len = SFF_8436_PAGE_SIZE; + else + chunk_len = pending_len; + } + + dev_dbg(&client->dev, + "sff_r/w: off %lld, len %ld, chunk_start_offset %lld, chunk_offset %lld, chunk_len %ld, pending_len %ld\n", + off, (long int) len, chunk_start_offset, chunk_offset, + (long int) chunk_len, (long int) pending_len); + + /* + * note: chunk_offset is from the start of the EEPROM, + * not the start of the chunk + */ + status = sff_8436_eeprom_update_client(port_data, buf, + chunk_offset, chunk_len, opcode); + if (status != chunk_len) { + /* This is another 'no device present' path */ + dev_dbg(&client->dev, + "sff_8436_update_client for chunk %d chunk_offset %lld chunk_len %ld failed %d!\n", + chunk, chunk_offset, (long int) chunk_len, status); + goto err; + } + buf += status; + pending_len -= status; + retval += status; + } + mutex_unlock(&port_data->update_lock); + + return retval; + +err: + mutex_unlock(&port_data->update_lock); + + return status; +} + +#else +static ssize_t sfp_port_read(struct sfp_port_data *data, + char *buf, loff_t off, size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) { + DEBUG_PRINT("Count = 0, return"); + return count; + } + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&data->update_lock); + + while (count) { + ssize_t status; + + status = sfp_eeprom_read(data->client, off, buf, count); + if (status <= 0) { + if (retval == 0) { + retval = status; + } + break; + } + + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&data->update_lock); + return retval; + +} +#endif + +static ssize_t sfp_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + int present; + struct sfp_port_data *data; + DEBUG_PRINT("offset = (%d), count = (%d)", off, count); + data = dev_get_drvdata(container_of(kobj, struct device, kobj)); + + present = sfp_is_port_present(data->client, data->port); + if (IS_ERR_VALUE(present)) { + return present; + } + + if (present == 0) { + /* port is not present */ + return -ENODEV; + } + +#if (MULTIPAGE_SUPPORT == 1) + return sfp_port_read_write(data, buf, off, count, QSFP_READ_OP); +#else + return sfp_port_read(data, buf, off, count); +#endif +} + +#if (MULTIPAGE_SUPPORT == 1) +static int sfp_sysfs_eeprom_init(struct kobject *kobj, struct bin_attribute *eeprom, size_t size) +#else +static int sfp_sysfs_eeprom_init(struct kobject *kobj, struct bin_attribute *eeprom) +#endif +{ + int err; + + sysfs_bin_attr_init(eeprom); + eeprom->attr.name = EEPROM_NAME; + eeprom->attr.mode = S_IWUSR | S_IRUGO; + eeprom->read = sfp_bin_read; + eeprom->write = sfp_bin_write; +#if (MULTIPAGE_SUPPORT == 1) + eeprom->size = size; +#else + eeprom->size = EEPROM_SIZE; +#endif + + /* Create eeprom file */ + err = sysfs_create_bin_file(kobj, eeprom); + if (err) { + return err; + } + + return 0; +} + +static int sfp_sysfs_eeprom_cleanup(struct kobject *kobj, struct bin_attribute *eeprom) +{ + sysfs_remove_bin_file(kobj, eeprom); + return 0; +} + + +#if (MULTIPAGE_SUPPORT == 0) +static int sfp_i2c_check_functionality(struct i2c_client *client) +{ +#if USE_I2C_BLOCK_READ + return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK); +#else + return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA); +#endif +} +#endif + +static const struct attribute_group sfp_msa_group = { + .attrs = sfp_msa_attributes, +}; + +static int sfp_msa_probe(struct i2c_client *client, const struct i2c_device_id *dev_id, + struct sfp_msa_data **data) +{ + int status; + struct sfp_msa_data *msa; + +#if (MULTIPAGE_SUPPORT == 0) + if (!sfp_i2c_check_functionality(client)) { + status = -EIO; + goto exit; + } +#endif + + msa = kzalloc(sizeof(struct sfp_msa_data), GFP_KERNEL); + if (!msa) { + status = -ENOMEM; + goto exit; + } + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &sfp_msa_group); + if (status) { + goto exit_free; + } + + /* init eeprom */ +#if (MULTIPAGE_SUPPORT == 1) + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &msa->eeprom.bin, SFF_8436_EEPROM_SIZE); +#else + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &msa->eeprom.bin); +#endif + if (status) { + goto exit_remove; + } + +#if (MULTIPAGE_SUPPORT == 1) + msa->ddm_client = i2c_new_dummy(client->adapter, client->addr + 1); + if (!msa->ddm_client) { + dev_err(&client->dev, "address 0x%02x unavailable\n", client->addr + 1); + status = -EADDRINUSE; + goto exit_eeprom; + } +#endif + + *data = msa; + dev_info(&client->dev, "sfp msa '%s'\n", client->name); + + return 0; + +exit_eeprom: + sfp_sysfs_eeprom_cleanup(&client->dev.kobj, &msa->eeprom.bin); +exit_remove: + sysfs_remove_group(&client->dev.kobj, &sfp_msa_group); +exit_free: + kfree(msa); +exit: + + return status; +} + +static const struct attribute_group qsfp_group = { + .attrs = qsfp_attributes, +}; + +static int qsfp_probe(struct i2c_client *client, const struct i2c_device_id *dev_id, + struct qsfp_data **data) +{ + int status; + struct qsfp_data *qsfp; + +#if (MULTIPAGE_SUPPORT == 0) + if (!sfp_i2c_check_functionality(client)) { + status = -EIO; + goto exit; + } +#endif + + qsfp = kzalloc(sizeof(struct qsfp_data), GFP_KERNEL); + if (!qsfp) { + status = -ENOMEM; + goto exit; + } + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &qsfp_group); + if (status) { + goto exit_free; + } + + /* init eeprom */ +#if (MULTIPAGE_SUPPORT == 1) + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &qsfp->eeprom.bin, SFF_8436_EEPROM_SIZE); +#else + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &qsfp->eeprom.bin); +#endif + if (status) { + goto exit_remove; + } + + *data = qsfp; + dev_info(&client->dev, "qsfp '%s'\n", client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &qsfp_group); +exit_free: + kfree(qsfp); +exit: + + return status; +} + +/* Platform dependent +++ */ +static int sfp_device_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int ret = 0; + struct sfp_port_data *data = NULL; + + if (client->addr != SFP_EEPROM_A0_I2C_ADDR) { + return -ENODEV; + } + + if (dev_id->driver_data < as7312_54x_port1 || dev_id->driver_data > as7312_54x_port54) { + return -ENXIO; + } + + data = kzalloc(sizeof(struct sfp_port_data), GFP_KERNEL); + if (!data) { + return -ENOMEM; + } + +#if (MULTIPAGE_SUPPORT == 1) + data->use_smbus = 0; + + /* Use I2C operations unless we're stuck with SMBus extensions. */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + data->use_smbus = I2C_SMBUS_I2C_BLOCK_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) { + data->use_smbus = I2C_SMBUS_WORD_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + data->use_smbus = I2C_SMBUS_BYTE_DATA; + } else { + ret = -EPFNOSUPPORT; + goto exit_kfree; + } + } + + if (!data->use_smbus || + (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) || + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_WORD_DATA) || + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + /* + * NOTE: AN-2079 + * Finisar recommends that the host implement 1 byte writes + * only since this module only supports 32 byte page boundaries. + * 2 byte writes are acceptable for PE and Vout changes per + * Application Note AN-2071. + */ + unsigned write_max = 1; + + if (write_max > io_limit) + write_max = io_limit; + if (data->use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) + write_max = I2C_SMBUS_BLOCK_MAX; + data->write_max = write_max; + + /* buffer (data + address at the beginning) */ + data->writebuf = kmalloc(write_max + 2, GFP_KERNEL); + if (!data->writebuf) { + ret = -ENOMEM; + goto exit_kfree; + } + } else { + dev_warn(&client->dev, + "cannot write due to controller restrictions."); + } + + if (data->use_smbus == I2C_SMBUS_WORD_DATA || + data->use_smbus == I2C_SMBUS_BYTE_DATA) { + dev_notice(&client->dev, "Falling back to %s reads, " + "performance will suffer\n", data->use_smbus == + I2C_SMBUS_WORD_DATA ? "word" : "byte"); + } +#endif + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->port = dev_id->driver_data; + data->client = client; + + if (dev_id->driver_data >= as7312_54x_port1 && dev_id->driver_data <= as7312_54x_port48) { + data->driver_type = DRIVER_TYPE_SFP_MSA; + ret = sfp_msa_probe(client, dev_id, &data->msa); + } + else { /* as7312_54x_portsfp49 ~ as7312_54x_portsfp54 */ + data->driver_type = DRIVER_TYPE_QSFP; + ret = qsfp_probe(client, dev_id, &data->qsfp); + } + + if (ret < 0) { + goto exit_kfree_buf; + } + + + return ret; + +exit_kfree_buf: +#if (MULTIPAGE_SUPPORT == 1) + if (data->writebuf) kfree(data->writebuf); +#endif + +exit_kfree: + kfree(data); + return ret; +} +/* Platform dependent --- */ + +static int sfp_msa_remove(struct i2c_client *client, struct sfp_msa_data *data) +{ + sfp_sysfs_eeprom_cleanup(&client->dev.kobj, &data->eeprom.bin); +#if (MULTIPAGE_SUPPORT == 1) + i2c_unregister_device(data->ddm_client); +#endif + sysfs_remove_group(&client->dev.kobj, &sfp_msa_group); + kfree(data); + return 0; +} + +static int qfp_remove(struct i2c_client *client, struct qsfp_data *data) +{ + sfp_sysfs_eeprom_cleanup(&client->dev.kobj, &data->eeprom.bin); + sysfs_remove_group(&client->dev.kobj, &qsfp_group); + kfree(data); + return 0; +} + +static int sfp_device_remove(struct i2c_client *client) +{ + int ret = 0; + struct sfp_port_data *data = i2c_get_clientdata(client); + + switch (data->driver_type) { + case DRIVER_TYPE_SFP_MSA: + return sfp_msa_remove(client, data->msa); + case DRIVER_TYPE_QSFP: + return qfp_remove(client, data->qsfp); + } + +#if (MULTIPAGE_SUPPORT == 1) + if (data->writebuf) + kfree(data->writebuf); +#endif + kfree(data); + return ret; +} + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +static struct i2c_driver sfp_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = sfp_device_probe, + .remove = sfp_device_remove, + .id_table = sfp_device_id, + .address_list = normal_i2c, +}; + +static int __init sfp_init(void) +{ + return i2c_add_driver(&sfp_driver); +} + +static void __exit sfp_exit(void) +{ + i2c_del_driver(&sfp_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton as7312_54x_sfp driver"); +MODULE_LICENSE("GPL"); + +module_init(sfp_init); +module_exit(sfp_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_i2c_cpld.c b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_i2c_cpld.c new file mode 100644 index 000000000000..67ecd8e036a9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/accton_i2c_cpld.c @@ -0,0 +1,1219 @@ +/* + * Copyright (C) Brandon Chuang + * + * This module supports the accton cpld that hold the channel select + * mechanism for other i2c slave devices, such as SFP. + * This includes the: + * Accton as7312_54x CPLD1/CPLD2/CPLD3 + * + * Based on: + * pca954x.c from Kumar Gala + * Copyright (C) 2006 + * + * Based on: + * pca954x.c from Ken Harrenstien + * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) + * + * Based on: + * i2c-virtual_cb.c from Brian Kuschak + * and + * pca9540.c from Jean Delvare . + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +enum cpld_type { + as7312_54x_cpld1, + as7312_54x_cpld2, + as7312_54x_cpld3 +}; + +struct as7312_54x_cpld_data { + enum cpld_type type; + struct device *hwmon_dev; + struct mutex update_lock; +}; + +static const struct i2c_device_id as7312_54x_cpld_id[] = { + { "as7312_54x_cpld1", as7312_54x_cpld1 }, + { "as7312_54x_cpld2", as7312_54x_cpld2 }, + { "as7312_54x_cpld3", as7312_54x_cpld3 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, as7312_54x_cpld_id); + +#define TRANSCEIVER_PRESENT_ATTR_ID(index) MODULE_PRESENT_##index +#define TRANSCEIVER_TXDISABLE_ATTR_ID(index) MODULE_TXDISABLE_##index +#define TRANSCEIVER_RXLOS_ATTR_ID(index) MODULE_RXLOS_##index +#define TRANSCEIVER_TXFAULT_ATTR_ID(index) MODULE_TXFAULT_##index +#define TRANSCEIVER_RESET_ATTR_ID(index) MODULE_RESET_##index + +enum as7312_54x_cpld1_sysfs_attributes { + CPLD_VERSION, + ACCESS, + MODULE_PRESENT_ALL, + MODULE_RXLOS_ALL, + /* transceiver attributes */ + TRANSCEIVER_PRESENT_ATTR_ID(1), + TRANSCEIVER_PRESENT_ATTR_ID(2), + TRANSCEIVER_PRESENT_ATTR_ID(3), + TRANSCEIVER_PRESENT_ATTR_ID(4), + TRANSCEIVER_PRESENT_ATTR_ID(5), + TRANSCEIVER_PRESENT_ATTR_ID(6), + TRANSCEIVER_PRESENT_ATTR_ID(7), + TRANSCEIVER_PRESENT_ATTR_ID(8), + TRANSCEIVER_PRESENT_ATTR_ID(9), + TRANSCEIVER_PRESENT_ATTR_ID(10), + TRANSCEIVER_PRESENT_ATTR_ID(11), + TRANSCEIVER_PRESENT_ATTR_ID(12), + TRANSCEIVER_PRESENT_ATTR_ID(13), + TRANSCEIVER_PRESENT_ATTR_ID(14), + TRANSCEIVER_PRESENT_ATTR_ID(15), + TRANSCEIVER_PRESENT_ATTR_ID(16), + TRANSCEIVER_PRESENT_ATTR_ID(17), + TRANSCEIVER_PRESENT_ATTR_ID(18), + TRANSCEIVER_PRESENT_ATTR_ID(19), + TRANSCEIVER_PRESENT_ATTR_ID(20), + TRANSCEIVER_PRESENT_ATTR_ID(21), + TRANSCEIVER_PRESENT_ATTR_ID(22), + TRANSCEIVER_PRESENT_ATTR_ID(23), + TRANSCEIVER_PRESENT_ATTR_ID(24), + TRANSCEIVER_PRESENT_ATTR_ID(25), + TRANSCEIVER_PRESENT_ATTR_ID(26), + TRANSCEIVER_PRESENT_ATTR_ID(27), + TRANSCEIVER_PRESENT_ATTR_ID(28), + TRANSCEIVER_PRESENT_ATTR_ID(29), + TRANSCEIVER_PRESENT_ATTR_ID(30), + TRANSCEIVER_PRESENT_ATTR_ID(31), + TRANSCEIVER_PRESENT_ATTR_ID(32), + TRANSCEIVER_PRESENT_ATTR_ID(33), + TRANSCEIVER_PRESENT_ATTR_ID(34), + TRANSCEIVER_PRESENT_ATTR_ID(35), + TRANSCEIVER_PRESENT_ATTR_ID(36), + TRANSCEIVER_PRESENT_ATTR_ID(37), + TRANSCEIVER_PRESENT_ATTR_ID(38), + TRANSCEIVER_PRESENT_ATTR_ID(39), + TRANSCEIVER_PRESENT_ATTR_ID(40), + TRANSCEIVER_PRESENT_ATTR_ID(41), + TRANSCEIVER_PRESENT_ATTR_ID(42), + TRANSCEIVER_PRESENT_ATTR_ID(43), + TRANSCEIVER_PRESENT_ATTR_ID(44), + TRANSCEIVER_PRESENT_ATTR_ID(45), + TRANSCEIVER_PRESENT_ATTR_ID(46), + TRANSCEIVER_PRESENT_ATTR_ID(47), + TRANSCEIVER_PRESENT_ATTR_ID(48), + TRANSCEIVER_PRESENT_ATTR_ID(49), + TRANSCEIVER_PRESENT_ATTR_ID(50), + TRANSCEIVER_PRESENT_ATTR_ID(51), + TRANSCEIVER_PRESENT_ATTR_ID(52), + TRANSCEIVER_PRESENT_ATTR_ID(53), + TRANSCEIVER_PRESENT_ATTR_ID(54), + TRANSCEIVER_RESET_ATTR_ID(49), + TRANSCEIVER_RESET_ATTR_ID(50), + TRANSCEIVER_RESET_ATTR_ID(51), + TRANSCEIVER_RESET_ATTR_ID(52), + TRANSCEIVER_RESET_ATTR_ID(53), + TRANSCEIVER_RESET_ATTR_ID(54), + TRANSCEIVER_TXDISABLE_ATTR_ID(1), + TRANSCEIVER_TXDISABLE_ATTR_ID(2), + TRANSCEIVER_TXDISABLE_ATTR_ID(3), + TRANSCEIVER_TXDISABLE_ATTR_ID(4), + TRANSCEIVER_TXDISABLE_ATTR_ID(5), + TRANSCEIVER_TXDISABLE_ATTR_ID(6), + TRANSCEIVER_TXDISABLE_ATTR_ID(7), + TRANSCEIVER_TXDISABLE_ATTR_ID(8), + TRANSCEIVER_TXDISABLE_ATTR_ID(9), + TRANSCEIVER_TXDISABLE_ATTR_ID(10), + TRANSCEIVER_TXDISABLE_ATTR_ID(11), + TRANSCEIVER_TXDISABLE_ATTR_ID(12), + TRANSCEIVER_TXDISABLE_ATTR_ID(13), + TRANSCEIVER_TXDISABLE_ATTR_ID(14), + TRANSCEIVER_TXDISABLE_ATTR_ID(15), + TRANSCEIVER_TXDISABLE_ATTR_ID(16), + TRANSCEIVER_TXDISABLE_ATTR_ID(17), + TRANSCEIVER_TXDISABLE_ATTR_ID(18), + TRANSCEIVER_TXDISABLE_ATTR_ID(19), + TRANSCEIVER_TXDISABLE_ATTR_ID(20), + TRANSCEIVER_TXDISABLE_ATTR_ID(21), + TRANSCEIVER_TXDISABLE_ATTR_ID(22), + TRANSCEIVER_TXDISABLE_ATTR_ID(23), + TRANSCEIVER_TXDISABLE_ATTR_ID(24), + TRANSCEIVER_TXDISABLE_ATTR_ID(25), + TRANSCEIVER_TXDISABLE_ATTR_ID(26), + TRANSCEIVER_TXDISABLE_ATTR_ID(27), + TRANSCEIVER_TXDISABLE_ATTR_ID(28), + TRANSCEIVER_TXDISABLE_ATTR_ID(29), + TRANSCEIVER_TXDISABLE_ATTR_ID(30), + TRANSCEIVER_TXDISABLE_ATTR_ID(31), + TRANSCEIVER_TXDISABLE_ATTR_ID(32), + TRANSCEIVER_TXDISABLE_ATTR_ID(33), + TRANSCEIVER_TXDISABLE_ATTR_ID(34), + TRANSCEIVER_TXDISABLE_ATTR_ID(35), + TRANSCEIVER_TXDISABLE_ATTR_ID(36), + TRANSCEIVER_TXDISABLE_ATTR_ID(37), + TRANSCEIVER_TXDISABLE_ATTR_ID(38), + TRANSCEIVER_TXDISABLE_ATTR_ID(39), + TRANSCEIVER_TXDISABLE_ATTR_ID(40), + TRANSCEIVER_TXDISABLE_ATTR_ID(41), + TRANSCEIVER_TXDISABLE_ATTR_ID(42), + TRANSCEIVER_TXDISABLE_ATTR_ID(43), + TRANSCEIVER_TXDISABLE_ATTR_ID(44), + TRANSCEIVER_TXDISABLE_ATTR_ID(45), + TRANSCEIVER_TXDISABLE_ATTR_ID(46), + TRANSCEIVER_TXDISABLE_ATTR_ID(47), + TRANSCEIVER_TXDISABLE_ATTR_ID(48), + TRANSCEIVER_RXLOS_ATTR_ID(1), + TRANSCEIVER_RXLOS_ATTR_ID(2), + TRANSCEIVER_RXLOS_ATTR_ID(3), + TRANSCEIVER_RXLOS_ATTR_ID(4), + TRANSCEIVER_RXLOS_ATTR_ID(5), + TRANSCEIVER_RXLOS_ATTR_ID(6), + TRANSCEIVER_RXLOS_ATTR_ID(7), + TRANSCEIVER_RXLOS_ATTR_ID(8), + TRANSCEIVER_RXLOS_ATTR_ID(9), + TRANSCEIVER_RXLOS_ATTR_ID(10), + TRANSCEIVER_RXLOS_ATTR_ID(11), + TRANSCEIVER_RXLOS_ATTR_ID(12), + TRANSCEIVER_RXLOS_ATTR_ID(13), + TRANSCEIVER_RXLOS_ATTR_ID(14), + TRANSCEIVER_RXLOS_ATTR_ID(15), + TRANSCEIVER_RXLOS_ATTR_ID(16), + TRANSCEIVER_RXLOS_ATTR_ID(17), + TRANSCEIVER_RXLOS_ATTR_ID(18), + TRANSCEIVER_RXLOS_ATTR_ID(19), + TRANSCEIVER_RXLOS_ATTR_ID(20), + TRANSCEIVER_RXLOS_ATTR_ID(21), + TRANSCEIVER_RXLOS_ATTR_ID(22), + TRANSCEIVER_RXLOS_ATTR_ID(23), + TRANSCEIVER_RXLOS_ATTR_ID(24), + TRANSCEIVER_RXLOS_ATTR_ID(25), + TRANSCEIVER_RXLOS_ATTR_ID(26), + TRANSCEIVER_RXLOS_ATTR_ID(27), + TRANSCEIVER_RXLOS_ATTR_ID(28), + TRANSCEIVER_RXLOS_ATTR_ID(29), + TRANSCEIVER_RXLOS_ATTR_ID(30), + TRANSCEIVER_RXLOS_ATTR_ID(31), + TRANSCEIVER_RXLOS_ATTR_ID(32), + TRANSCEIVER_RXLOS_ATTR_ID(33), + TRANSCEIVER_RXLOS_ATTR_ID(34), + TRANSCEIVER_RXLOS_ATTR_ID(35), + TRANSCEIVER_RXLOS_ATTR_ID(36), + TRANSCEIVER_RXLOS_ATTR_ID(37), + TRANSCEIVER_RXLOS_ATTR_ID(38), + TRANSCEIVER_RXLOS_ATTR_ID(39), + TRANSCEIVER_RXLOS_ATTR_ID(40), + TRANSCEIVER_RXLOS_ATTR_ID(41), + TRANSCEIVER_RXLOS_ATTR_ID(42), + TRANSCEIVER_RXLOS_ATTR_ID(43), + TRANSCEIVER_RXLOS_ATTR_ID(44), + TRANSCEIVER_RXLOS_ATTR_ID(45), + TRANSCEIVER_RXLOS_ATTR_ID(46), + TRANSCEIVER_RXLOS_ATTR_ID(47), + TRANSCEIVER_RXLOS_ATTR_ID(48), + TRANSCEIVER_TXFAULT_ATTR_ID(1), + TRANSCEIVER_TXFAULT_ATTR_ID(2), + TRANSCEIVER_TXFAULT_ATTR_ID(3), + TRANSCEIVER_TXFAULT_ATTR_ID(4), + TRANSCEIVER_TXFAULT_ATTR_ID(5), + TRANSCEIVER_TXFAULT_ATTR_ID(6), + TRANSCEIVER_TXFAULT_ATTR_ID(7), + TRANSCEIVER_TXFAULT_ATTR_ID(8), + TRANSCEIVER_TXFAULT_ATTR_ID(9), + TRANSCEIVER_TXFAULT_ATTR_ID(10), + TRANSCEIVER_TXFAULT_ATTR_ID(11), + TRANSCEIVER_TXFAULT_ATTR_ID(12), + TRANSCEIVER_TXFAULT_ATTR_ID(13), + TRANSCEIVER_TXFAULT_ATTR_ID(14), + TRANSCEIVER_TXFAULT_ATTR_ID(15), + TRANSCEIVER_TXFAULT_ATTR_ID(16), + TRANSCEIVER_TXFAULT_ATTR_ID(17), + TRANSCEIVER_TXFAULT_ATTR_ID(18), + TRANSCEIVER_TXFAULT_ATTR_ID(19), + TRANSCEIVER_TXFAULT_ATTR_ID(20), + TRANSCEIVER_TXFAULT_ATTR_ID(21), + TRANSCEIVER_TXFAULT_ATTR_ID(22), + TRANSCEIVER_TXFAULT_ATTR_ID(23), + TRANSCEIVER_TXFAULT_ATTR_ID(24), + TRANSCEIVER_TXFAULT_ATTR_ID(25), + TRANSCEIVER_TXFAULT_ATTR_ID(26), + TRANSCEIVER_TXFAULT_ATTR_ID(27), + TRANSCEIVER_TXFAULT_ATTR_ID(28), + TRANSCEIVER_TXFAULT_ATTR_ID(29), + TRANSCEIVER_TXFAULT_ATTR_ID(30), + TRANSCEIVER_TXFAULT_ATTR_ID(31), + TRANSCEIVER_TXFAULT_ATTR_ID(32), + TRANSCEIVER_TXFAULT_ATTR_ID(33), + TRANSCEIVER_TXFAULT_ATTR_ID(34), + TRANSCEIVER_TXFAULT_ATTR_ID(35), + TRANSCEIVER_TXFAULT_ATTR_ID(36), + TRANSCEIVER_TXFAULT_ATTR_ID(37), + TRANSCEIVER_TXFAULT_ATTR_ID(38), + TRANSCEIVER_TXFAULT_ATTR_ID(39), + TRANSCEIVER_TXFAULT_ATTR_ID(40), + TRANSCEIVER_TXFAULT_ATTR_ID(41), + TRANSCEIVER_TXFAULT_ATTR_ID(42), + TRANSCEIVER_TXFAULT_ATTR_ID(43), + TRANSCEIVER_TXFAULT_ATTR_ID(44), + TRANSCEIVER_TXFAULT_ATTR_ID(45), + TRANSCEIVER_TXFAULT_ATTR_ID(46), + TRANSCEIVER_TXFAULT_ATTR_ID(47), + TRANSCEIVER_TXFAULT_ATTR_ID(48), +}; + +/* sysfs attributes for hwmon + */ +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_rxlos_all(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf); +static int as7312_54x_cpld_read_internal(struct i2c_client *client, u8 reg); +static int as7312_54x_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value); + +/* transceiver attributes */ +#define DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_present_##index, S_IRUGO, show_status, NULL, MODULE_PRESENT_##index) +#define DECLARE_TRANSCEIVER_PRESENT_ATTR(index) &sensor_dev_attr_module_present_##index.dev_attr.attr + +#define DECLARE_TRANSCEIVER_RESET_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_reset_##index, S_IRUGO | S_IWUSR, show_status, set_reset, MODULE_RESET_##index) +#define DECLARE_TRANSCEIVER_RESET_ATTR(index) &sensor_dev_attr_module_reset_##index.dev_attr.attr + +#define DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_tx_disable_##index, S_IRUGO | S_IWUSR, show_status, set_tx_disable, MODULE_TXDISABLE_##index); \ + static SENSOR_DEVICE_ATTR(module_rx_los_##index, S_IRUGO, show_status, NULL, MODULE_RXLOS_##index); \ + static SENSOR_DEVICE_ATTR(module_tx_fault_##index, S_IRUGO, show_status, NULL, MODULE_TXFAULT_##index) +#define DECLARE_SFP_TRANSCEIVER_ATTR(index) \ + &sensor_dev_attr_module_tx_disable_##index.dev_attr.attr, \ + &sensor_dev_attr_module_rx_los_##index.dev_attr.attr, \ + &sensor_dev_attr_module_tx_fault_##index.dev_attr.attr + +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(access, S_IWUSR, NULL, access, ACCESS); +/* transceiver attributes */ +static SENSOR_DEVICE_ATTR(module_present_all, S_IRUGO, show_present_all, NULL, MODULE_PRESENT_ALL); +static SENSOR_DEVICE_ATTR(module_rx_los_all, S_IRUGO, show_rxlos_all, NULL, MODULE_RXLOS_ALL); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(1); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(2); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(3); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(4); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(5); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(6); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(7); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(8); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(9); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(10); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(11); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(12); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(13); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(14); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(15); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(16); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(17); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(18); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(19); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(20); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(21); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(22); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(23); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(24); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(25); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(26); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(27); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(28); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(29); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(30); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(31); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(32); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(33); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(34); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(35); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(36); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(37); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(38); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(39); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(40); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(41); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(42); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(43); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(44); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(45); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(46); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(47); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(48); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(49); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(50); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(51); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(52); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(53); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(54); + +DECLARE_TRANSCEIVER_RESET_SENSOR_DEVICE_ATTR(49); +DECLARE_TRANSCEIVER_RESET_SENSOR_DEVICE_ATTR(50); +DECLARE_TRANSCEIVER_RESET_SENSOR_DEVICE_ATTR(51); +DECLARE_TRANSCEIVER_RESET_SENSOR_DEVICE_ATTR(52); +DECLARE_TRANSCEIVER_RESET_SENSOR_DEVICE_ATTR(53); +DECLARE_TRANSCEIVER_RESET_SENSOR_DEVICE_ATTR(54); + +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(1); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(2); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(3); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(4); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(5); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(6); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(7); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(8); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(9); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(10); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(11); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(12); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(13); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(14); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(15); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(16); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(17); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(18); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(19); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(20); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(21); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(22); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(23); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(24); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(25); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(26); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(27); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(28); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(29); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(30); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(31); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(32); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(33); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(34); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(35); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(36); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(37); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(38); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(39); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(40); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(41); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(42); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(43); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(44); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(45); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(46); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(47); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(48); + +static struct attribute *as7312_54x_cpld1_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + NULL +}; + +static const struct attribute_group as7312_54x_cpld1_group = { + .attrs = as7312_54x_cpld1_attributes, +}; + +static struct attribute *as7312_54x_cpld2_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + /* transceiver attributes */ + &sensor_dev_attr_module_present_all.dev_attr.attr, + &sensor_dev_attr_module_rx_los_all.dev_attr.attr, + DECLARE_TRANSCEIVER_PRESENT_ATTR(1), + DECLARE_TRANSCEIVER_PRESENT_ATTR(2), + DECLARE_TRANSCEIVER_PRESENT_ATTR(3), + DECLARE_TRANSCEIVER_PRESENT_ATTR(4), + DECLARE_TRANSCEIVER_PRESENT_ATTR(5), + DECLARE_TRANSCEIVER_PRESENT_ATTR(6), + DECLARE_TRANSCEIVER_PRESENT_ATTR(7), + DECLARE_TRANSCEIVER_PRESENT_ATTR(8), + DECLARE_TRANSCEIVER_PRESENT_ATTR(9), + DECLARE_TRANSCEIVER_PRESENT_ATTR(10), + DECLARE_TRANSCEIVER_PRESENT_ATTR(11), + DECLARE_TRANSCEIVER_PRESENT_ATTR(12), + DECLARE_TRANSCEIVER_PRESENT_ATTR(13), + DECLARE_TRANSCEIVER_PRESENT_ATTR(14), + DECLARE_TRANSCEIVER_PRESENT_ATTR(15), + DECLARE_TRANSCEIVER_PRESENT_ATTR(16), + DECLARE_TRANSCEIVER_PRESENT_ATTR(17), + DECLARE_TRANSCEIVER_PRESENT_ATTR(18), + DECLARE_TRANSCEIVER_PRESENT_ATTR(19), + DECLARE_TRANSCEIVER_PRESENT_ATTR(20), + DECLARE_TRANSCEIVER_PRESENT_ATTR(21), + DECLARE_TRANSCEIVER_PRESENT_ATTR(22), + DECLARE_TRANSCEIVER_PRESENT_ATTR(23), + DECLARE_TRANSCEIVER_PRESENT_ATTR(24), + DECLARE_TRANSCEIVER_PRESENT_ATTR(49), + DECLARE_TRANSCEIVER_PRESENT_ATTR(50), + DECLARE_TRANSCEIVER_PRESENT_ATTR(51), + DECLARE_TRANSCEIVER_PRESENT_ATTR(52), + DECLARE_TRANSCEIVER_RESET_ATTR(49), + DECLARE_TRANSCEIVER_RESET_ATTR(50), + DECLARE_TRANSCEIVER_RESET_ATTR(51), + DECLARE_TRANSCEIVER_RESET_ATTR(52), + DECLARE_SFP_TRANSCEIVER_ATTR(1), + DECLARE_SFP_TRANSCEIVER_ATTR(2), + DECLARE_SFP_TRANSCEIVER_ATTR(3), + DECLARE_SFP_TRANSCEIVER_ATTR(4), + DECLARE_SFP_TRANSCEIVER_ATTR(5), + DECLARE_SFP_TRANSCEIVER_ATTR(6), + DECLARE_SFP_TRANSCEIVER_ATTR(7), + DECLARE_SFP_TRANSCEIVER_ATTR(8), + DECLARE_SFP_TRANSCEIVER_ATTR(9), + DECLARE_SFP_TRANSCEIVER_ATTR(10), + DECLARE_SFP_TRANSCEIVER_ATTR(11), + DECLARE_SFP_TRANSCEIVER_ATTR(12), + DECLARE_SFP_TRANSCEIVER_ATTR(13), + DECLARE_SFP_TRANSCEIVER_ATTR(14), + DECLARE_SFP_TRANSCEIVER_ATTR(15), + DECLARE_SFP_TRANSCEIVER_ATTR(16), + DECLARE_SFP_TRANSCEIVER_ATTR(17), + DECLARE_SFP_TRANSCEIVER_ATTR(18), + DECLARE_SFP_TRANSCEIVER_ATTR(19), + DECLARE_SFP_TRANSCEIVER_ATTR(20), + DECLARE_SFP_TRANSCEIVER_ATTR(21), + DECLARE_SFP_TRANSCEIVER_ATTR(22), + DECLARE_SFP_TRANSCEIVER_ATTR(23), + DECLARE_SFP_TRANSCEIVER_ATTR(24), + NULL +}; + +static const struct attribute_group as7312_54x_cpld2_group = { + .attrs = as7312_54x_cpld2_attributes, +}; + +static struct attribute *as7312_54x_cpld3_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + /* transceiver attributes */ + &sensor_dev_attr_module_present_all.dev_attr.attr, + &sensor_dev_attr_module_rx_los_all.dev_attr.attr, + DECLARE_TRANSCEIVER_PRESENT_ATTR(25), + DECLARE_TRANSCEIVER_PRESENT_ATTR(26), + DECLARE_TRANSCEIVER_PRESENT_ATTR(27), + DECLARE_TRANSCEIVER_PRESENT_ATTR(28), + DECLARE_TRANSCEIVER_PRESENT_ATTR(29), + DECLARE_TRANSCEIVER_PRESENT_ATTR(30), + DECLARE_TRANSCEIVER_PRESENT_ATTR(31), + DECLARE_TRANSCEIVER_PRESENT_ATTR(32), + DECLARE_TRANSCEIVER_PRESENT_ATTR(33), + DECLARE_TRANSCEIVER_PRESENT_ATTR(34), + DECLARE_TRANSCEIVER_PRESENT_ATTR(35), + DECLARE_TRANSCEIVER_PRESENT_ATTR(36), + DECLARE_TRANSCEIVER_PRESENT_ATTR(37), + DECLARE_TRANSCEIVER_PRESENT_ATTR(38), + DECLARE_TRANSCEIVER_PRESENT_ATTR(39), + DECLARE_TRANSCEIVER_PRESENT_ATTR(40), + DECLARE_TRANSCEIVER_PRESENT_ATTR(41), + DECLARE_TRANSCEIVER_PRESENT_ATTR(42), + DECLARE_TRANSCEIVER_PRESENT_ATTR(43), + DECLARE_TRANSCEIVER_PRESENT_ATTR(44), + DECLARE_TRANSCEIVER_PRESENT_ATTR(45), + DECLARE_TRANSCEIVER_PRESENT_ATTR(46), + DECLARE_TRANSCEIVER_PRESENT_ATTR(47), + DECLARE_TRANSCEIVER_PRESENT_ATTR(48), + DECLARE_TRANSCEIVER_PRESENT_ATTR(53), + DECLARE_TRANSCEIVER_PRESENT_ATTR(54), + DECLARE_TRANSCEIVER_RESET_ATTR(53), + DECLARE_TRANSCEIVER_RESET_ATTR(54), + DECLARE_SFP_TRANSCEIVER_ATTR(25), + DECLARE_SFP_TRANSCEIVER_ATTR(26), + DECLARE_SFP_TRANSCEIVER_ATTR(27), + DECLARE_SFP_TRANSCEIVER_ATTR(28), + DECLARE_SFP_TRANSCEIVER_ATTR(29), + DECLARE_SFP_TRANSCEIVER_ATTR(30), + DECLARE_SFP_TRANSCEIVER_ATTR(31), + DECLARE_SFP_TRANSCEIVER_ATTR(32), + DECLARE_SFP_TRANSCEIVER_ATTR(33), + DECLARE_SFP_TRANSCEIVER_ATTR(34), + DECLARE_SFP_TRANSCEIVER_ATTR(35), + DECLARE_SFP_TRANSCEIVER_ATTR(36), + DECLARE_SFP_TRANSCEIVER_ATTR(37), + DECLARE_SFP_TRANSCEIVER_ATTR(38), + DECLARE_SFP_TRANSCEIVER_ATTR(39), + DECLARE_SFP_TRANSCEIVER_ATTR(40), + DECLARE_SFP_TRANSCEIVER_ATTR(41), + DECLARE_SFP_TRANSCEIVER_ATTR(42), + DECLARE_SFP_TRANSCEIVER_ATTR(43), + DECLARE_SFP_TRANSCEIVER_ATTR(44), + DECLARE_SFP_TRANSCEIVER_ATTR(45), + DECLARE_SFP_TRANSCEIVER_ATTR(46), + DECLARE_SFP_TRANSCEIVER_ATTR(47), + DECLARE_SFP_TRANSCEIVER_ATTR(48), + NULL +}; + +static const struct attribute_group as7312_54x_cpld3_group = { + .attrs = as7312_54x_cpld3_attributes, +}; + +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf) +{ + int i, status; + u8 values[4] = {0}; + u8 regs[] = {0x9, 0xA, 0xB, 0x18}; + struct i2c_client *client = to_i2c_client(dev); + struct as7312_54x_cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = as7312_54x_cpld_read_internal(client, regs[i]); + + if (status < 0) { + goto exit; + } + + values[i] = ~(u8)status; + } + + mutex_unlock(&data->update_lock); + + /* Return values 1 -> 54 in order */ + if (data->type == as7312_54x_cpld2) { + values[3] &= 0xF; + } + else { /* as7312_54x_cpld3 */ + values[3] &= 0x3; + } + + return sprintf(buf, "%.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], values[3]); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_rxlos_all(struct device *dev, struct device_attribute *da, + char *buf) +{ + int i, status; + u8 values[3] = {0}; + u8 regs[] = {0x12, 0x13, 0x14}; + struct i2c_client *client = to_i2c_client(dev); + struct as7312_54x_cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = as7312_54x_cpld_read_internal(client, regs[i]); + + if (status < 0) { + goto exit; + } + + values[i] = (u8)status; + } + + mutex_unlock(&data->update_lock); + + /* Return values 1 -> 24 in order */ + return sprintf(buf, "%.2x %.2x %.2x\n", values[0], values[1], values[2]); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7312_54x_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0, revert = 0; + + switch (attr->index) { + case MODULE_PRESENT_1 ... MODULE_PRESENT_8: + reg = 0x9; + mask = 0x1 << (attr->index - MODULE_PRESENT_1); + break; + case MODULE_PRESENT_9 ... MODULE_PRESENT_16: + reg = 0xA; + mask = 0x1 << (attr->index - MODULE_PRESENT_9); + break; + case MODULE_PRESENT_17 ... MODULE_PRESENT_24: + reg = 0xB; + mask = 0x1 << (attr->index - MODULE_PRESENT_17); + break; + case MODULE_PRESENT_25 ... MODULE_PRESENT_32: + reg = 0x9; + mask = 0x1 << (attr->index - MODULE_PRESENT_25); + break; + case MODULE_PRESENT_33 ... MODULE_PRESENT_40: + reg = 0xA; + mask = 0x1 << (attr->index - MODULE_PRESENT_33); + break; + case MODULE_PRESENT_41 ... MODULE_PRESENT_48: + reg = 0xB; + mask = 0x1 << (attr->index - MODULE_PRESENT_41); + break; + case MODULE_PRESENT_49: + reg = 0x18; + mask = 0x1; + break; + case MODULE_PRESENT_50: + reg = 0x18; + mask = 0x2; + break; + case MODULE_PRESENT_51: + reg = 0x18; + mask = 0x4; + break; + case MODULE_PRESENT_52: + reg = 0x18; + mask = 0x8; + break; + case MODULE_PRESENT_53: + reg = 0x18; + mask = 0x1; + break; + case MODULE_PRESENT_54: + reg = 0x18; + mask = 0x2; + break; + + case MODULE_RESET_49 ... MODULE_RESET_54: + reg = 0x17; + mask = 1 << ((attr->index - MODULE_PRESENT_49)%4); + break; + + case MODULE_TXFAULT_1 ... MODULE_TXFAULT_8: + reg = 0xC; + mask = 0x1 << (attr->index - MODULE_TXFAULT_1); + break; + case MODULE_TXFAULT_9 ... MODULE_TXFAULT_16: + reg = 0xD; + mask = 0x1 << (attr->index - MODULE_TXFAULT_9); + break; + case MODULE_TXFAULT_17 ... MODULE_TXFAULT_24: + reg = 0xE; + mask = 0x1 << (attr->index - MODULE_TXFAULT_17); + break; + case MODULE_TXFAULT_25 ... MODULE_TXFAULT_32: + reg = 0xC; + mask = 0x1 << (attr->index - MODULE_TXFAULT_25); + break; + case MODULE_TXFAULT_33 ... MODULE_TXFAULT_40: + reg = 0xD; + mask = 0x1 << (attr->index - MODULE_TXFAULT_33); + break; + case MODULE_TXFAULT_41 ... MODULE_TXFAULT_48: + reg = 0xE; + mask = 0x1 << (attr->index - MODULE_TXFAULT_41); + break; + case MODULE_TXDISABLE_1 ... MODULE_TXDISABLE_8: + reg = 0xF; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_1); + break; + case MODULE_TXDISABLE_9 ... MODULE_TXDISABLE_16: + reg = 0x10; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_9); + break; + case MODULE_TXDISABLE_17 ... MODULE_TXDISABLE_24: + reg = 0x11; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_17); + break; + case MODULE_TXDISABLE_25 ... MODULE_TXDISABLE_32: + reg = 0xF; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_25); + break; + case MODULE_TXDISABLE_33 ... MODULE_TXDISABLE_40: + reg = 0x10; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_33); + break; + case MODULE_TXDISABLE_41 ... MODULE_TXDISABLE_48: + reg = 0x11; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_41); + break; + case MODULE_RXLOS_1 ... MODULE_RXLOS_8: + reg = 0x12; + mask = 0x1 << (attr->index - MODULE_RXLOS_1); + break; + case MODULE_RXLOS_9 ... MODULE_RXLOS_16: + reg = 0x13; + mask = 0x1 << (attr->index - MODULE_RXLOS_9); + break; + case MODULE_RXLOS_17 ... MODULE_RXLOS_24: + reg = 0x14; + mask = 0x1 << (attr->index - MODULE_RXLOS_17); + break; + case MODULE_RXLOS_25 ... MODULE_RXLOS_32: + reg = 0x12; + mask = 0x1 << (attr->index - MODULE_RXLOS_25); + break; + case MODULE_RXLOS_33 ... MODULE_RXLOS_40: + reg = 0x13; + mask = 0x1 << (attr->index - MODULE_RXLOS_33); + break; + case MODULE_RXLOS_41 ... MODULE_RXLOS_48: + reg = 0x14; + mask = 0x1 << (attr->index - MODULE_RXLOS_41); + break; + default: + return 0; + } + + if (attr->index >= MODULE_PRESENT_1 && attr->index <= MODULE_PRESENT_54) { + revert = 1; + } + + mutex_lock(&data->update_lock); + status = as7312_54x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", revert ? !(status & mask) : !!(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t set_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7312_54x_cpld_data *data = i2c_get_clientdata(client); + long reset; + int status; + u8 reg = 0, mask = 0; + + status = kstrtol(buf, 10, &reset); + if (status) { + return status; + } + + switch (attr->index) { + case MODULE_RESET_49 ... MODULE_RESET_54: + reg = 0x17; + mask = 1 << ((attr->index - MODULE_RESET_49)%4); + break; + default: + return 0; + } + + /* Read current status */ + mutex_lock(&data->update_lock); + status = as7312_54x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + + /* Update reset status */ + if (reset) { + status |= mask; + } + else { + status &= ~mask; + } + status = as7312_54x_cpld_write_internal(client, reg, status); + if (unlikely(status < 0)) { + goto exit; + } + + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + + + + +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7312_54x_cpld_data *data = i2c_get_clientdata(client); + long disable; + int status; + u8 reg = 0, mask = 0; + + status = kstrtol(buf, 10, &disable); + if (status) { + return status; + } + + switch (attr->index) { + case MODULE_TXDISABLE_1 ... MODULE_TXDISABLE_8: + reg = 0xF; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_1); + break; + case MODULE_TXDISABLE_9 ... MODULE_TXDISABLE_16: + reg = 0x10; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_9); + break; + case MODULE_TXDISABLE_17 ... MODULE_TXDISABLE_24: + reg = 0x11; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_17); + break; + case MODULE_TXDISABLE_25 ... MODULE_TXDISABLE_32: + reg = 0xF; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_25); + break; + case MODULE_TXDISABLE_33 ... MODULE_TXDISABLE_40: + reg = 0x10; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_33); + break; + case MODULE_TXDISABLE_41 ... MODULE_TXDISABLE_48: + reg = 0x11; + mask = 0x1 << (attr->index - MODULE_TXDISABLE_41); + break; + default: + return 0; + } + + /* Read current status */ + mutex_lock(&data->update_lock); + status = as7312_54x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + + /* Update tx_disable status */ + if (disable) { + status |= mask; + } + else { + status &= ~mask; + } + + status = as7312_54x_cpld_write_internal(client, reg, status); + if (unlikely(status < 0)) { + goto exit; + } + + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int status; + u32 addr, val; + struct i2c_client *client = to_i2c_client(dev); + struct as7312_54x_cpld_data *data = i2c_get_clientdata(client); + + if (sscanf(buf, "0x%x 0x%x", &addr, &val) != 2) { + return -EINVAL; + } + + if (addr > 0xFF || val > 0xFF) { + return -EINVAL; + } + + mutex_lock(&data->update_lock); + status = as7312_54x_cpld_write_internal(client, addr, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static void as7312_54x_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void as7312_54x_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static ssize_t show_version(struct device *dev, struct device_attribute *attr, char *buf) +{ + int val = 0; + struct i2c_client *client = to_i2c_client(dev); + + val = i2c_smbus_read_byte_data(client, 0x1); + + if (val < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x1) err %d\n", client->addr, val); + } + + return sprintf(buf, "%d", val); +} + +/* + * I2C init/probing/exit functions + */ +static int as7312_54x_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); + struct as7312_54x_cpld_data *data; + int ret = -ENODEV; + const struct attribute_group *group = NULL; + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) + goto exit; + + data = kzalloc(sizeof(struct as7312_54x_cpld_data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->type = id->driver_data; + + /* Register sysfs hooks */ + switch (data->type) { + case as7312_54x_cpld1: + group = &as7312_54x_cpld1_group; + break; + case as7312_54x_cpld2: + group = &as7312_54x_cpld2_group; + break; + case as7312_54x_cpld3: + group = &as7312_54x_cpld3_group; + break; + default: + break; + } + + if (group) { + ret = sysfs_create_group(&client->dev.kobj, group); + if (ret) { + goto exit_free; + } + } + + as7312_54x_cpld_add_client(client); + return 0; + +exit_free: + kfree(data); +exit: + return ret; +} + +static int as7312_54x_cpld_remove(struct i2c_client *client) +{ + struct as7312_54x_cpld_data *data = i2c_get_clientdata(client); + const struct attribute_group *group = NULL; + + as7312_54x_cpld_remove_client(client); + + /* Remove sysfs hooks */ + switch (data->type) { + case as7312_54x_cpld1: + group = &as7312_54x_cpld1_group; + break; + case as7312_54x_cpld2: + group = &as7312_54x_cpld2_group; + break; + case as7312_54x_cpld3: + group = &as7312_54x_cpld3_group; + break; + default: + break; + } + + if (group) { + sysfs_remove_group(&client->dev.kobj, group); + } + + kfree(data); + + return 0; +} + +static int as7312_54x_cpld_read_internal(struct i2c_client *client, u8 reg) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, reg); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static int as7312_54x_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, reg, value); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +int as7312_54x_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as7312_54x_cpld_read_internal(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as7312_54x_cpld_read); + +int as7312_54x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as7312_54x_cpld_write_internal(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as7312_54x_cpld_write); + +static struct i2c_driver as7312_54x_cpld_driver = { + .driver = { + .name = "as7312_54x_cpld", + .owner = THIS_MODULE, + }, + .probe = as7312_54x_cpld_probe, + .remove = as7312_54x_cpld_remove, + .id_table = as7312_54x_cpld_id, +}; + +static int __init as7312_54x_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&as7312_54x_cpld_driver); +} + +static void __exit as7312_54x_cpld_exit(void) +{ + i2c_del_driver(&as7312_54x_cpld_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("Accton I2C CPLD driver"); +MODULE_LICENSE("GPL"); + +module_init(as7312_54x_cpld_init); +module_exit(as7312_54x_cpld_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/ym2651y.c new file mode 120000 index 000000000000..f4d67640ccc3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/modules/ym2651y.c @@ -0,0 +1 @@ +../../common/modules/ym2651y.c \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/service/as7312-platform-monitor.service b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/service/as7312-platform-monitor.service new file mode 100755 index 000000000000..b79357665bed --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/service/as7312-platform-monitor.service @@ -0,0 +1,17 @@ +[Unit] +Description=Accton AS7312-54X Platform Monitoring service +Before=pmon.service +After=sysinit.target +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/local/bin/accton_as7312_util.py install +ExecStart=/usr/local/bin/accton_as7312_monitor.py +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/setup.py b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/setup.py new file mode 100755 index 000000000000..f0518d07689d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/setup.py @@ -0,0 +1,16 @@ +#!/usr/bin/env pytho + +import os +import sys +from setuptools import setup +os.listdir + +setup( + name='as7312_54x', + version='1.0', + description='Module to initialize Accton AS7312-54X platforms', + + packages=['as7312_54x'], + package_dir={'as7312_54x': 'as7312-54x/classes'}, +) + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/README b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/README new file mode 100755 index 000000000000..66f31a030423 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/README @@ -0,0 +1,117 @@ +Copyright (C) 2016 Accton Networks, Inc. + +This program is free software: you can redistribute it and/or modify +It under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +Contents of this package: + patch - files under patch/ is for kernel and ONIE installer + for the kernel: + config-accton-as7312_54x.patch + for kernel configuration. + driver-i2c-muxes-pca954x-always-deselect.patch + for i2c_mux deselects after transaction. + driver-patches-for-accton-as7312-fan-psu-cpld.patch + for as7312's fan/psu/cpld/led/sfp drivers. + for ONIE: + onie_installer-accton-AS7312-54X.patch + for console port setting and copy util script o rootfs. + module - Contains source code of as7312 kernel driver modules. + +The late Sonic building scripts, pushed @Dec 5 2016, will automatically +create a docker container and run building process under it. +User is not necessary to handle docker environment creation. + +1. Download sonic-buildimage environment. + - Run "git clone https://github.com/Azure/sonic-buildimage". + - cd to sonic-buildimage and run "git submodule update --init --recursive". +2. Build kernel + - cd ./src/sonic-linux-kernel + - Copy patches and series from patch/kernel of this release to + sonic-linux-kernel/patch. + - Build kernel by "make". + - The built kernel package, linux-image-3.16.0-5-amd64_3.16.51-3+deb8u1_amd64.deb + , is generated. +3. Build installer + - Change directory back to sonic-buildimage/. + - Get onie_installer-accton-AS7312-54X.patch" from patch/installer. + - Change setting for AS7312-54X by patching build_image.sh. + "patch -p1 < onie_installer-accton-AS7312-54X.patch" + !!NOTICE, patching onie_installer-accton-AS7312-54X.patch comments out the + "git status" checking at build_image.sh. + - The account and password of installed OS can be given at rules/config. + The default user and password are "admin" & "YourPaSsWoRd" respectively. + - Run "make configure PLATFORM=broadcom" + - Copy the built kernel debian package to target/debs/. + The file is linux-image-3.16.0-5-amd64_*_amd64.deb under directory + src/sonic-linux-kernel/. + - Run "make target/sonic-generic.bin" + - Get the installer, target/sonic-generic.bin, to target machine and install. + +All Linux kernel code is licensed under the GPLv1. All other code is +licensed under the GPLv3. Please see the LICENSE file for copies of +both licenses. + +The code for integacting with Accton AS7312-54X has 2 parts, +kernel drivers and operational script. +The kernel drivers of peripherals are under module/ directory. +1. These drivers are patched into kernel by + driver-patches-for-accton-as7312-fan-psu-cpld.patch + Or you can build the driver under module/ by setting environment variable, + KERNEL_SRC, to proper linux built directory and run make. + It may be sonic-linux-kernel/linux-3.*/debian/build/build_amd64_none_amd64/. +2. A operational script, accton_as7312_util.py, for device initializatian and + peripheral accessing should be installed at /usr/bin. + This script is generated by onie_installer-accton-AS7312-54X.patch. + It's done by patching onie_installer-accton-AS7312-54X.patch at build-image. + Run "accton_as7312_util.py install" to install drivers. + +To initialize the system, run "accton_as7312_util.py install". +To clean up the drivers & devices, run "accton_as7312_util.py clean". +To dump information of sensors, run "accton_as7312_util.py show". +To dump SFP EEPROM, run "accton_as7312_util.py sff". +To set fan speed, run "accton_as7312_util.py set fan". +To enable/disable SFP emission, run "accton_as7312_util.py set sfp". +To set system LEDs' color, run "accton_as7312_util.py set led" +For more information, run "accton_as7312_util.py --help". + +==================================================================== +Besides applying accton_as7312_util.py to access peripherals, you can +access peripherals by sysfs nodes directly after the installation is run. + +System LED: + There are 5 system LEDs at the lower-left corner of front panel. + They are loc, diag, fan, ps1, and ps2. + The sysfs interface color mappings are as follows: + Brightness: + 0 => off + 1 => green + 2 => amber + 3 => red + 4 => blue + But not all colors are available for each LED. + +Fan Control: + There are 10 fans inside 5 fan modules. + All fans share 1 duty setting, ranged from 0~100. + +Thermal sensers: + 3 temperature sensors are controlled by the lm75 kernel modules. + +PSUs: + There 2 power supplies slot at the left/right side of the back. + Once if a PSU is not plugged, the status of it is shown failed. + +There are 48 SFP+ and 6 QSFP modules are equipped. +Before operating on PSU and QSFP+, please make sure it is well plugged. +Otherwise, operation is going to fail. + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/accton_as7312_monitor.py b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/accton_as7312_monitor.py new file mode 100755 index 000000000000..bdab0d4b8bff --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/accton_as7312_monitor.py @@ -0,0 +1,208 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018: Jostar modify for as7716_32 +# 2/27/2018: Roy Lee modify for as7312_54x +# ------------------------------------------------------------------ + +try: + import os + import sys, getopt + import subprocess + import click + import imp + import logging + import logging.config + import types + import time # this is only being used as part of the example + import traceback + from tabulate import tabulate + from as7312_54x.fanutil import FanUtil + from as7312_54x.thermalutil import ThermalUtil +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +# Deafults +VERSION = '1.0' +FUNCTION_NAME = 'accton_as7312_monitor' + +global log_file +global log_level + +# (LM75_1+ LM75_2+ LM75_3) is LM75 at i2c addresses 0x48, 0x49, and 0x4A. +# TMP = (LM75_1+ LM75_2+ LM75_3)/3 +#1. If TMP < 35, All fans run with duty 31.25%. +#2. If TMP>=35 or the temperature of any one of fan is higher than 40, +# All fans run with duty 50% +#3. If TMP >= 40 or the temperature of any one of fan is higher than 45, +# All fans run with duty 62.5%. +#4. If TMP >= 45 or the temperature of any one of fan is higher than 50, +# All fans run with duty 100%. +#5. Any one of 6 fans is fault, set duty = 100%. +#6. Direction factor. If it is B2F direction, duty + 12%. + + # MISC: + # 1.Check single LM75 before applied average. + # 2.If no matched fan speed is found from the policy, + # use FAN_DUTY_CYCLE_MIN as default speed + # Get current temperature + # 4.Decision 3: Decide new fan speed depend on fan direction/current fan speed/temperature + + + + +# Make a class we can use to capture stdout and sterr in the log +class accton_as7312_monitor(object): + # static temp var + _ori_temp = 0 + _new_perc = 0 + _ori_perc = 0 + + def __init__(self, log_file, log_level): + """Needs a logger and a logger level.""" + # set up logging to file + logging.basicConfig( + filename=log_file, + filemode='w', + level=log_level, + format= '[%(asctime)s] {%(pathname)s:%(lineno)d} %(levelname)s - %(message)s', + datefmt='%H:%M:%S' + ) + + # set up logging to console + if log_level == logging.DEBUG: + console = logging.StreamHandler() + console.setLevel(log_level) + formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') + console.setFormatter(formatter) + logging.getLogger('').addHandler(console) + + logging.debug('SET. logfile:%s / loglevel:%d', log_file, log_level) + + def manage_fans(self): + max_duty = 100 + fan_policy_f2b = { + 0: [32, 0, 105000], + 1: [50, 105000, 120000], + 2: [63, 120000, 135000], + 3: [max_duty, 135000, sys.maxsize], + } + fan_policy_b2f = { + 0: [44, 0, 105000], + 1: [63, 105000, 120000], + 2: [75, 120000, 135000], + 3: [max_duty, 135000, sys.maxsize], + } + fan_policy_single = { + 0: 40000, + 1: 45000, + 2: 50000, + } + + thermal = ThermalUtil() + fan = FanUtil() + for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): + fan_status = fan.get_fan_status(x) + if fan_status is None: + logging.debug('INFO. SET new_perc to %d (FAN stauts is None. fan_num:%d)', max_duty, x) + return False + if fan_status is False: + logging.debug('INFO. SET new_perc to %d (FAN fault. fan_num:%d)', max_duty, x) + fan.set_fan_duty_cycle(max_duty) + return True + #logging.debug('INFO. fan_status is True (fan_num:%d)', x) + + fan_dir=fan.get_fan_dir(1) + if fan_dir == 1: + fan_policy = fan_policy_f2b + else: + fan_policy = fan_policy_b2f + + #Decide fan duty by if any of sensors > fan_policy_single. + new_duty_cycle = fan_policy[0][0] + for x in range(thermal.get_idx_thermal_start(), thermal.get_num_thermals()+1): + single_thm = thermal._get_thermal_node_val(x) + for y in range(0, len(fan_policy_single)): + if single_thm > fan_policy_single[y]: + if fan_policy[y+1][0] > new_duty_cycle: + new_duty_cycle = fan_policy[y+1][0] + logging.debug('INFO. Single thermal sensor %d with temp %d > %d , new_duty_cycle=%d', + x, single_thm, fan_policy_single[y], new_duty_cycle) + single_result = new_duty_cycle + + + #Find if current duty matched any of define duty. + #If not, set it to highest one. + cur_duty_cycle = fan.get_fan_duty_cycle() + for x in range(0, len(fan_policy)): + if cur_duty_cycle == fan_policy[x][0]: + break + if x == len(fan_policy) : + fan.set_fan_duty_cycle(fan_policy[0][0]) + cur_duty_cycle = max_duty + + #Decide fan duty by if sum of sensors falls into any of fan_policy{} + get_temp = thermal.get_thermal_temp() + new_duty_cycle = cur_duty_cycle + for x in range(0, len(fan_policy)): + y = len(fan_policy) - x -1 #checked from highest + if get_temp > fan_policy[y][1] and get_temp < fan_policy[y][2] : + new_duty_cycle= fan_policy[y][0] + logging.debug('INFO. Sum of temp %d > %d , new_duty_cycle=%d', get_temp, fan_policy[y][1], new_duty_cycle) + + sum_result = new_duty_cycle + if (sum_result>single_result): + new_duty_cycle = sum_result; + else: + new_duty_cycle = single_result + + logging.debug('INFO. Final duty_cycle=%d', new_duty_cycle) + if(new_duty_cycle != cur_duty_cycle): + fan.set_fan_duty_cycle(new_duty_cycle) + return True + +def main(argv): + log_file = '%s.log' % FUNCTION_NAME + log_level = logging.INFO + if len(sys.argv) != 1: + try: + opts, args = getopt.getopt(argv,'hdl:',['lfile=']) + except getopt.GetoptError: + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + for opt, arg in opts: + if opt == '-h': + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + elif opt in ('-d', '--debug'): + log_level = logging.DEBUG + elif opt in ('-l', '--lfile'): + log_file = arg + + monitor = accton_as7312_monitor(log_file, log_level) + + # Loop forever, doing something useful hopefully: + while True: + monitor.manage_fans() + time.sleep(10) + +if __name__ == '__main__': + main(sys.argv[1:]) diff --git a/platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/accton_as7312_util.py b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/accton_as7312_util.py new file mode 100755 index 000000000000..b8107c47afea --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7312-54x/utils/accton_as7312_util.py @@ -0,0 +1,588 @@ +#!/usr/bin/env python +# +# Copyright (C) 2016 Accton Networks, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes + show : show all systen status + sff : dump SFP eeprom + set : change board setting with fan|led|sfp +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + + + + +PROJECT_NAME = 'as7312_54x' +version = '0.1.0' +verbose = False +DEBUG = False +args = [] +ALL_DEVICE = {} +DEVICE_NO = {'led':5, 'fan':6,'thermal':4, 'psu':2, 'sfp':54} +FORCE = 0 +#logging.basicConfig(filename= PROJECT_NAME+'.log', filemode='w',level=logging.DEBUG) +#logging.basicConfig(level=logging.INFO) + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + do_install() + elif arg == 'clean': + do_uninstall() + elif arg == 'show': + device_traversal() + elif arg == 'sff': + if len(args)!=2: + show_eeprom_help() + elif int(args[1]) ==0 or int(args[1]) > DEVICE_NO['sfp']: + show_eeprom_help() + else: + show_eeprom(args[1]) + return + elif arg == 'set': + if len(args)<3: + show_set_help() + else: + set_device(args[1:]) + return + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_set_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print cmd +" [led|sfp|fan]" + print " use \""+ cmd + " led 0-4 \" to set led color" + print " use \""+ cmd + " fan 0-100\" to set fan duty percetage" + print " use \""+ cmd + " sfp 1-54 {0|1}\" to set sfp# tx_disable" + sys.exit(0) + +def show_eeprom_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print " use \""+ cmd + " 1-54 \" to dump sfp# eeprom" + sys.exit(0) + +def my_log(txt): + if DEBUG == True: + print "[ROY]"+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status, output = commands.getstatusoutput(cmd) + my_log (cmd +"with result:" + str(status)) + my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +def driver_check(): + ret, lsmod = log_os_system("lsmod| grep accton", 0) + logging.info('mods:'+lsmod) + if len(lsmod) ==0: + return False + return True + + + +kos = [ +'modprobe i2c_dev', +'modprobe i2c_mux_pca954x force_deselect_on_exit=1', +'modprobe accton_i2c_cpld' , +'modprobe ym2651y' , +'modprobe accton_as7312_54x_fan' , +'modprobe optoe' , +'modprobe accton_as7312_54x_leds' , +'modprobe accton_as7312_54x_psu' ] + +def driver_install(): + global FORCE + status, output = log_os_system("depmod", 1) + for i in range(0,len(kos)): + status, output = log_os_system(kos[i], 1) + if status: + if FORCE == 0: + return status + return 0 + +def driver_uninstall(): + global FORCE + for i in range(0,len(kos)): + rm = kos[-(i+1)].replace("modprobe", "modprobe -rq") + rm = rm.replace("insmod", "rmmod") + lst = rm.split(" ") + if len(lst) > 3: + del(lst[3]) + rm = " ".join(lst) + status, output = log_os_system(rm, 1) + if status: + if FORCE == 0: + return status + return 0 + +led_prefix ='/sys/class/leds/accton_'+PROJECT_NAME+'_led::' +hwmon_types = {'led': ['diag','fan','loc','psu1','psu2']} +hwmon_nodes = {'led': ['brightness'] } +hwmon_prefix ={'led': led_prefix} + +i2c_prefix = '/sys/bus/i2c/devices/' +i2c_bus = {'fan': ['2-0066'] , + 'thermal': ['3-0048','3-0049', '3-004a', '3-004b'] , + 'psu': ['10-0051','11-0053'], + 'sfp': ['-0050']} +i2c_nodes = {'fan': ['present', 'front_speed_rpm', 'rear_speed_rpm'] , + 'thermal': ['hwmon/hwmon*/temp1_input'] , + 'psu': ['psu_present ', 'psu_power_good'] , + 'sfp': ['sfp_is_present', 'sfp_tx_disable']} + +sfp_map = [18,19,20,21,22,23,24,25,26,27, + 28,29,30,31,32,33,34,35,36,37, + 38,39,40,41,42,43,44,45,46,47, + 48,49,50,51,52,53,54,55,56,57, + 58,59,60,61,62,63,64,65,66,67, + 68,69,70,71] + +qsfp_start = 48 + +mknod =[ +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-0/new_device' , +'echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-1/new_device' , +'echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-1/new_device' , +'echo pca9548 0x74 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x75 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-1/new_device', + +'echo as7312_54x_fan 0x66 > /sys/bus/i2c/devices/i2c-2/new_device ', +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x4b > /sys/bus/i2c/devices/i2c-3/new_device', +'echo as7312_54x_psu1 0x53 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo ym2651 0x5b > /sys/bus/i2c/devices/i2c-11/new_device', +'echo as7312_54x_psu2 0x50 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo ym2651 0x58 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo as7312_54x_cpld1 0x60 > /sys/bus/i2c/devices/i2c-4/new_device', +'echo as7312_54x_cpld2 0x62 > /sys/bus/i2c/devices/i2c-5/new_device', +'echo as7312_54x_cpld3 0x64 > /sys/bus/i2c/devices/i2c-6/new_device'] + +mknod2 =[ +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-1/new_device' , +'echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-0/new_device' , +'echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-0/new_device' , +'echo pca9548 0x74 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x75 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-0/new_device', + +'echo as7312_54x_fan 0x66 > /sys/bus/i2c/devices/i2c-2/new_device ', +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x4b > /sys/bus/i2c/devices/i2c-3/new_device', +'echo as7312_54x_psu1 0x53 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo ym2651 0x5b > /sys/bus/i2c/devices/i2c-11/new_device', +'echo as7312_54x_psu2 0x50 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo ym2651 0x58 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo as7312_54x_cpld1 0x60 > /sys/bus/i2c/devices/i2c-4/new_device', +'echo as7312_54x_cpld2 0x62 > /sys/bus/i2c/devices/i2c-5/new_device', +'echo as7312_54x_cpld3 0x64 > /sys/bus/i2c/devices/i2c-6/new_device'] + + + +def i2c_order_check(): + # i2c bus 0 and 1 might be installed in different order. + # Here check if 0x70 is exist @ i2c-1 + tmp = "echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-1/new_device" + status, output = log_os_system(tmp, 0) + if not device_exist(): + order = 1 + else: + order = 0 + tmp = "echo 0x70 > /sys/bus/i2c/devices/i2c-1/delete_device" + status, output = log_os_system(tmp, 0) + return order + +def device_install(): + global FORCE + + order = i2c_order_check() + + # if 0x70 is not exist @i2c-1, use reversed bus order + if order: + for i in range(0,len(mknod2)): + #for pca954x need times to built new i2c buses + if mknod2[i].find('pca954') != -1: + time.sleep(1) + + status, output = log_os_system(mknod2[i], 1) + if status: + print output + if FORCE == 0: + return status + else: + for i in range(0,len(mknod)): + #for pca954x need times to built new i2c buses + if mknod[i].find('pca954') != -1: + time.sleep(1) + + status, output = log_os_system(mknod[i], 1) + if status: + print output + if FORCE == 0: + return status + for i in range(0,len(sfp_map)): + if i < qsfp_start: + status, output =log_os_system("echo optoe2 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + else: + status, output =log_os_system("echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + return + +def device_uninstall(): + global FORCE + + status, output =log_os_system("ls /sys/bus/i2c/devices/1-0076", 0) + if status==0: + I2C_ORDER=1 + else: + I2C_ORDER=0 + + for i in range(0,len(sfp_map)): + target = "/sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/delete_device" + status, output =log_os_system("echo 0x50 > "+ target, 1) + if status: + print output + if FORCE == 0: + return status + + if I2C_ORDER==0: + nodelist = mknod + else: + nodelist = mknod2 + + for i in range(len(nodelist)): + target = nodelist[-(i+1)] + temp = target.split() + del temp[1] + temp[-1] = temp[-1].replace('new_device', 'delete_device') + status, output = log_os_system(" ".join(temp), 1) + if status: + print output + if FORCE == 0: + return status + + return + +def system_ready(): + if driver_check() == False: + return False + if not device_exist(): + return False + return True + +def do_install(): + print "Checking system...." + if driver_check() == False: + print "No driver, installing...." + status = driver_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" drivers detected...." + if not device_exist(): + print "No device, installing...." + status = device_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" devices detected...." + return + +def do_uninstall(): + print "Checking system...." + if not device_exist(): + print PROJECT_NAME.upper() +" has no device installed...." + else: + print "Removing device...." + status = device_uninstall() + if status: + if FORCE == 0: + return status + + if driver_check()== False : + print PROJECT_NAME.upper() +" has no driver installed...." + else: + print "Removing installed driver...." + status = driver_uninstall() + if status: + if FORCE == 0: + return status + + return + +def devices_info(): + global DEVICE_NO + global ALL_DEVICE + global i2c_bus, hwmon_types + for key in DEVICE_NO: + ALL_DEVICE[key]= {} + for i in range(0,DEVICE_NO[key]): + ALL_DEVICE[key][key+str(i+1)] = [] + + for key in i2c_bus: + buses = i2c_bus[key] + nodes = i2c_nodes[key] + for i in range(0,len(buses)): + for j in range(0,len(nodes)): + if 'fan' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ buses[i]+"/fan"+str(k+1)+"_"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + elif 'sfp' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ str(sfp_map[k])+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + else: + node = key+str(i+1) + path = i2c_prefix+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + + for key in hwmon_types: + itypes = hwmon_types[key] + nodes = hwmon_nodes[key] + for i in range(0,len(itypes)): + for j in range(0,len(nodes)): + node = key+"_"+itypes[i] + path = hwmon_prefix[key]+ itypes[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][ key+str(i+1)].append(path) + + #show dict all in the order + if DEBUG == True: + for i in sorted(ALL_DEVICE.keys()): + print(i+": ") + for j in sorted(ALL_DEVICE[i].keys()): + print(" "+j) + for k in (ALL_DEVICE[i][j]): + print(" "+" "+k) + return + +def show_eeprom(index): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + node = ALL_DEVICE['sfp'] ['sfp'+str(index)][0] + node = node.replace(node.split("/")[-1], 'sfp_eeprom') + # check if got hexdump command in current environment + ret, log = log_os_system("which hexdump", 0) + ret, log2 = log_os_system("which busybox hexdump", 0) + if len(log): + hex_cmd = 'hexdump' + elif len(log2): + hex_cmd = ' busybox hexdump' + else: + log = 'Failed : no hexdump cmd!!' + logging.info(log) + print log + return 1 + + print node + ":" + ret, log = log_os_system("cat "+node+"| "+hex_cmd+" -C", 1) + if ret==0: + print log + else: + print "**********device no found**********" + return + +def set_device(args): + global DEVICE_NO + global ALL_DEVICE + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + + if args[0]=='led': + if int(args[1])>4: + show_set_help() + return + #print ALL_DEVICE['led'] + for i in range(0,len(ALL_DEVICE['led'])): + for k in (ALL_DEVICE['led']['led'+str(i+1)]): + ret, log = log_os_system("echo "+args[1]+" >"+k, 1) + if ret: + return ret + elif args[0]=='fan': + if int(args[1])>100: + show_set_help() + return + #print ALL_DEVICE['fan'] + #fan1~6 is all fine, all fan share same setting + node = ALL_DEVICE['fan'] ['fan1'][0] + node = node.replace(node.split("/")[-1], 'fan_duty_cycle_percentage') + ret, log = log_os_system("cat "+ node, 1) + if ret==0: + print ("Previous fan duty: " + log.strip() +"%") + ret, log = log_os_system("echo "+args[1]+" >"+node, 1) + if ret==0: + print ("Current fan duty: " + args[1] +"%") + return ret + elif args[0]=='sfp': + if int(args[1])> DEVICE_NO[args[0]] or int(args[1])==0: + show_set_help() + return + if len(args)<2: + show_set_help() + return + + if int(args[2])>1: + show_set_help() + return + + #print ALL_DEVICE[args[0]] + for i in range(0,len(ALL_DEVICE[args[0]])): + for j in ALL_DEVICE[args[0]][args[0]+str(args[1])]: + if j.find('tx_disable')!= -1: + ret, log = log_os_system("echo "+args[2]+" >"+ j, 1) + if ret: + return ret + + return + +#get digits inside a string. +#Ex: 31 for "sfp31" +def get_value(input): + digit = re.findall('\d+', input) + return int(digit[0]) + +def device_traversal(): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + for i in sorted(ALL_DEVICE.keys()): + print("============================================") + print(i.upper()+": ") + print("============================================") + + for j in sorted(ALL_DEVICE[i].keys(), key=get_value): + print " "+j+":", + for k in (ALL_DEVICE[i][j]): + ret, log = log_os_system("cat "+k, 0) + func = k.split("/")[-1].strip() + func = re.sub(j+'_','',func,1) + func = re.sub(i.lower()+'_','',func,1) + if ret==0: + print func+"="+log+" ", + else: + print func+"="+"X"+" ", + print + print("----------------------------------------------------------------") + + + print + return + +def device_exist(): + ret1, log = log_os_system("ls "+i2c_prefix+"*0070", 0) + ret2, log = log_os_system("ls "+i2c_prefix+"i2c-2", 0) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/__init__.py b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/__init__.py new file mode 100755 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/fanutil.py b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/fanutil.py new file mode 100755 index 000000000000..06ebbb777920 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/fanutil.py @@ -0,0 +1,254 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018: Jostar modify for as7716_32 +# 3/32/2018: Roy Lee modify for as7326_56x +# ------------------------------------------------------------------ + +try: + import time + import logging + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class FanUtil(object): + """Platform-specific FanUtil class""" + + FAN_NUM_ON_MAIN_BROAD = 6 + FAN_NUM_1_IDX = 1 + FAN_NUM_2_IDX = 2 + FAN_NUM_3_IDX = 3 + FAN_NUM_4_IDX = 4 + FAN_NUM_5_IDX = 5 + FAN_NUM_6_IDX = 6 + + FAN_NODE_NUM_OF_MAP = 2 + FAN_NODE_FAULT_IDX_OF_MAP = 1 + #FAN_NODE_SPEED_IDX_OF_MAP = 2 + FAN_NODE_DIR_IDX_OF_MAP = 2 + #FAN_NODE_DUTY_IDX_OF_MAP = 4 + #FANR_NODE_FAULT_IDX_OF_MAP = 5 + + BASE_VAL_PATH = '/sys/bus/i2c/devices/11-0066/{0}' + FAN_DUTY_PATH = '/sys/bus/i2c/devices/11-0066/fan_duty_cycle_percentage' + + #logfile = '' + #loglevel = logging.INFO + + """ Dictionary where + key1 = fan id index (integer) starting from 1 + key2 = fan node index (interger) starting from 1 + value = path to fan device file (string) """ + _fan_to_device_path_mapping = {} + +#fan1_direction +#fan1_fault +#fan1_present + + #(FAN_NUM_2_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan2_duty_cycle_percentage', + _fan_to_device_node_mapping = { + (FAN_NUM_1_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan1_fault', + (FAN_NUM_1_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan1_direction', + + (FAN_NUM_2_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan2_fault', + (FAN_NUM_2_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan2_direction', + + (FAN_NUM_3_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan3_fault', + (FAN_NUM_3_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan3_direction', + + (FAN_NUM_4_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan4_fault', + (FAN_NUM_4_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan4_direction', + + (FAN_NUM_5_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan5_fault', + (FAN_NUM_5_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan5_direction', + + (FAN_NUM_6_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan6_fault', + (FAN_NUM_6_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan6_direction', + } + + def _get_fan_to_device_node(self, fan_num, node_num): + return self._fan_to_device_node_mapping[(fan_num, node_num)] + + def _get_fan_node_val(self, fan_num, node_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + + try: + val_file = open(device_path, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + def _set_fan_node_val(self, fan_num, node_num, val): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + content = str(val) + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + try: + val_file = open(device_path, 'w') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + val_file.write(content) + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return True + + def __init__(self): + fan_path = self.BASE_VAL_PATH + + for fan_num in range(self.FAN_NUM_1_IDX, self.FAN_NUM_ON_MAIN_BROAD+1): + for node_num in range(self.FAN_NODE_FAULT_IDX_OF_MAP, self.FAN_NODE_NUM_OF_MAP+1): + self._fan_to_device_path_mapping[(fan_num, node_num)] = fan_path.format( + self._fan_to_device_node_mapping[(fan_num, node_num)]) + + def get_num_fans(self): + return self.FAN_NUM_ON_MAIN_BROAD + + def get_idx_fan_start(self): + return self.FAN_NUM_1_IDX + + def get_num_nodes(self): + return self.FAN_NODE_NUM_OF_MAP + + def get_idx_node_start(self): + return self.FAN_NODE_FAULT_IDX_OF_MAP + + def get_size_node_map(self): + return len(self._fan_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._fan_to_device_path_mapping) + + def get_fan_to_device_path(self, fan_num, node_num): + return self._fan_to_device_path_mapping[(fan_num, node_num)] + + def get_fan_fault(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_FAULT_IDX_OF_MAP) + + #def get_fan_speed(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FAN_NODE_SPEED_IDX_OF_MAP) + + def get_fan_dir(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_DIR_IDX_OF_MAP) + + def get_fan_duty_cycle(self): + #duty_path = self.FAN_DUTY_PATH + try: + val_file = open(self.FAN_DUTY_PATH) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = val_file.readline().rstrip() + val_file.close() + + return int(content) + #self._get_fan_node_val(fan_num, self.FAN_NODE_DUTY_IDX_OF_MAP) +#static u32 reg_val_to_duty_cycle(u8 reg_val) +#{ +# reg_val &= FAN_DUTY_CYCLE_REG_MASK; +# return ((u32)(reg_val+1) * 625 + 75)/ 100; +#} +# + def set_fan_duty_cycle(self, val): + + try: + fan_file = open(self.FAN_DUTY_PATH, 'r+') + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + #val = ((val + 1 ) * 625 +75 ) / 100 + fan_file.write(str(val)) + fan_file.close() + return True + + #def get_fanr_fault(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FANR_NODE_FAULT_IDX_OF_MAP) + + def get_fanr_speed(self, fan_num): + return self._get_fan_node_val(fan_num, self.FANR_NODE_SPEED_IDX_OF_MAP) + + def get_fan_status(self, fan_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num, %d', fan_num) + return None + + if self.get_fan_fault(fan_num) is not None and self.get_fan_fault(fan_num) > 0: + logging.debug('GET. FAN fault. fan_num, %d', fan_num) + return False + + #if self.get_fanr_fault(fan_num) is not None and self.get_fanr_fault(fan_num) > 0: + # logging.debug('GET. FANR fault. fan_num, %d', fan_num) + # return False + + return True + +#def main(): +# fan = FanUtil() +# +# print 'get_size_node_map : %d' % fan.get_size_node_map() +# print 'get_size_path_map : %d' % fan.get_size_path_map() +# for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): +# for y in range(fan.get_idx_node_start(), fan.get_num_nodes()+1): +# print fan.get_fan_to_device_path(x, y) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/thermalutil.py b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/thermalutil.py new file mode 100755 index 000000000000..e4329b8b9783 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/classes/thermalutil.py @@ -0,0 +1,124 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018:Jostar modify for as7716_32x +# 3/23/2018: Roy Lee modify for as7326_56x +# ------------------------------------------------------------------ + +try: + import time + import logging + import glob + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class ThermalUtil(object): + """Platform-specific ThermalUtil class""" + + THERMAL_NUM_ON_MAIN_BROAD = 3 + THERMAL_NUM_1_IDX = 1 # 1_ON_MAIN_BROAD + THERMAL_NUM_2_IDX = 2 # 2_ON_MAIN_BROAD + THERMAL_NUM_3_IDX = 3 # 3_ON_MAIN_BROAD + + BASE_VAL_PATH = '/sys/bus/i2c/devices/{0}-00{1}/hwmon/hwmon*/temp1_input' + + """ Dictionary where + key1 = thermal id index (integer) starting from 1 + value = path to fan device file (string) """ + _thermal_to_device_path_mapping = {} + + _thermal_to_device_node_mapping = { + THERMAL_NUM_1_IDX: ['15', '48'], + THERMAL_NUM_2_IDX: ['15', '49'], + THERMAL_NUM_3_IDX: ['15', '4a'], + } + + def __init__(self): + thermal_path = self.BASE_VAL_PATH + + for x in range(self.THERMAL_NUM_1_IDX, self.THERMAL_NUM_ON_MAIN_BROAD+1): + self._thermal_to_device_path_mapping[x] = thermal_path.format( + self._thermal_to_device_node_mapping[x][0], + self._thermal_to_device_node_mapping[x][1]) + + def _get_thermal_node_val(self, thermal_num): + if thermal_num < self.THERMAL_NUM_1_IDX or thermal_num > self.THERMAL_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. thermal_num, %d', thermal_num) + return None + + device_path = self.get_thermal_to_device_path(thermal_num) + for filename in glob.glob(device_path): + try: + val_file = open(filename, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + + def get_num_thermals(self): + return self.THERMAL_NUM_ON_MAIN_BROAD + + def get_idx_thermal_start(self): + return self.THERMAL_NUM_1_IDX + + def get_size_node_map(self): + return len(self._thermal_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._thermal_to_device_path_mapping) + + def get_thermal_to_device_path(self, thermal_num): + return self._thermal_to_device_path_mapping[thermal_num] + + def get_thermal_1_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + + def get_thermal_2_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) + def get_thermal_temp(self): + return (self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) +self._get_thermal_node_val(self.THERMAL_NUM_3_IDX)) + +#def main(): +# thermal = ThermalUtil() +# +# print 'get_size_node_map : %d' % thermal.get_size_node_map() +# print 'get_size_path_map : %d' % thermal.get_size_path_map() +# for x in range(thermal.get_idx_thermal_start(), thermal.get_num_thermals()+1): +# print thermal.get_thermal_to_device_path(x) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/Makefile b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/Makefile new file mode 100755 index 000000000000..85c066571c2f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/Makefile @@ -0,0 +1,17 @@ +ifneq ($(KERNELRELEASE),) +obj-m:= accton_i2c_cpld.o \ + accton_as7326_56x_fan.o accton_as7326_56x_leds.o \ + accton_as7326_56x_psu.o ym2651y.o + +else +ifeq (,$(KERNEL_SRC)) +$(error KERNEL_SRC is not defined) +else +KERNELDIR:=$(KERNEL_SRC) +endif +PWD:=$(shell pwd) +default: + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules +clean: + rm -rf *.o *.mod.o *.mod.o *.ko .*cmd .tmp_versions Module.markers Module.symvers modules.order +endif diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_fan.c b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_fan.c new file mode 100755 index 000000000000..606019f3ea44 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_fan.c @@ -0,0 +1,815 @@ +/* + * A hwmon driver for the Accton as7326 56x fan + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "as7326_56x_fan" + +#define NUM_THERMAL_SENSORS (3) /* Get sum of this number of sensors.*/ +#define THERMAL_SENSORS_DRIVER "lm75" +#define THERMAL_SENSORS_ADDRS {0x48, 0x49, 0x4a} + +#define IN +#define OUT + +static struct as7326_56x_fan_data *as7326_56x_fan_update_device(struct device *dev); +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_enable(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, char *buf); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +/* fan related data, the index should match sysfs_fan_attributes + */ +static const u8 fan_reg[] = { + 0x0F, /* fan 1-6 present status */ + 0x10, /* fan 1-6 direction(0:F2B 1:B2F) */ + 0x11, /* fan PWM(for all fan) */ + 0x12, /* front fan 1 speed(rpm) */ + 0x13, /* front fan 2 speed(rpm) */ + 0x14, /* front fan 3 speed(rpm) */ + 0x15, /* front fan 4 speed(rpm) */ + 0x16, /* front fan 5 speed(rpm) */ + 0x17, /* front fan 6 speed(rpm) */ + 0x22, /* rear fan 1 speed(rpm) */ + 0x23, /* rear fan 2 speed(rpm) */ + 0x24, /* rear fan 3 speed(rpm) */ + 0x25, /* rear fan 4 speed(rpm) */ + 0x26, /* rear fan 5 speed(rpm) */ + 0x27, /* rear fan 6 speed(rpm) */ +}; + +/* Each client has this additional data */ +struct as7326_56x_fan_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[ARRAY_SIZE(fan_reg)]; /* Register value */ + u8 enable; + int system_temp; /*In unit of mini-Celsius*/ + int sensors_found; +}; + +enum fan_id { + FAN1_ID, + FAN2_ID, + FAN3_ID, + FAN4_ID, + FAN5_ID, + FAN6_ID +}; + +enum sysfs_fan_attributes { + FAN_PRESENT_REG, + FAN_DIRECTION_REG, + FAN_DUTY_CYCLE_PERCENTAGE, /* Only one CPLD register to control duty cycle for all fans */ + FAN1_FRONT_SPEED_RPM, + FAN2_FRONT_SPEED_RPM, + FAN3_FRONT_SPEED_RPM, + FAN4_FRONT_SPEED_RPM, + FAN5_FRONT_SPEED_RPM, + FAN6_FRONT_SPEED_RPM, + FAN1_REAR_SPEED_RPM, + FAN2_REAR_SPEED_RPM, + FAN3_REAR_SPEED_RPM, + FAN4_REAR_SPEED_RPM, + FAN5_REAR_SPEED_RPM, + FAN6_REAR_SPEED_RPM, + FAN1_DIRECTION, + FAN2_DIRECTION, + FAN3_DIRECTION, + FAN4_DIRECTION, + FAN5_DIRECTION, + FAN6_DIRECTION, + FAN1_PRESENT, + FAN2_PRESENT, + FAN3_PRESENT, + FAN4_PRESENT, + FAN5_PRESENT, + FAN6_PRESENT, + FAN1_FAULT, + FAN2_FAULT, + FAN3_FAULT, + FAN4_FAULT, + FAN5_FAULT, + FAN6_FAULT +}; + +/* Define attributes + */ +#define DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT);\ + static SENSOR_DEVICE_ATTR(fan##index2##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT) +#define DECLARE_FAN_FAULT_ATTR(index, index2) &sensor_dev_attr_fan##index##_fault.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_fault.dev_attr.attr + +#define DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_direction, S_IRUGO, fan_show_value, NULL, FAN##index##_DIRECTION) +#define DECLARE_FAN_DIRECTION_ATTR(index) &sensor_dev_attr_fan##index##_direction.dev_attr.attr + +#define DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index##_enable, S_IWUSR | S_IRUGO, get_enable, set_enable, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_DUTY_CYCLE_ATTR(index) &sensor_dev_attr_fan_duty_cycle_percentage.dev_attr.attr, \ + &sensor_dev_attr_pwm##index.dev_attr.attr, \ + &sensor_dev_attr_pwm##index##_enable.dev_attr.attr + +#define DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR() \ + static SENSOR_DEVICE_ATTR(sys_temp, S_IRUGO, get_sys_temp, NULL, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_SYSTEM_TEMP_ATTR() &sensor_dev_attr_sys_temp.dev_attr.attr + + +#define DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_present, S_IRUGO, fan_show_value, NULL, FAN##index##_PRESENT) +#define DECLARE_FAN_PRESENT_ATTR(index) &sensor_dev_attr_fan##index##_present.dev_attr.attr + +#define DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_front_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_rear_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index2##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM) +#define DECLARE_FAN_SPEED_RPM_ATTR(index, index2) &sensor_dev_attr_fan##index##_front_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_rear_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_input.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_input.dev_attr.attr + +/* 6 fan fault attributes in this platform */ +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(6,16); +/* 6 fan speed(rpm) attributes in this platform */ +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(6,16); +/* 6 fan present attributes in this platform */ +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(1); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(2); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(3); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(4); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(5); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(6); +/* 6 fan direction attribute in this platform */ +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(1); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(2); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(3); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(4); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(5); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(6); +/* 1 fan duty cycle attribute in this platform */ +DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(1); +/* System temperature for fancontrol */ +DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR(); + +static struct attribute *as7326_56x_fan_attributes[] = { + /* fan related attributes */ + DECLARE_FAN_FAULT_ATTR(1,11), + DECLARE_FAN_FAULT_ATTR(2,12), + DECLARE_FAN_FAULT_ATTR(3,13), + DECLARE_FAN_FAULT_ATTR(4,14), + DECLARE_FAN_FAULT_ATTR(5,15), + DECLARE_FAN_FAULT_ATTR(6,16), + DECLARE_FAN_SPEED_RPM_ATTR(1,11), + DECLARE_FAN_SPEED_RPM_ATTR(2,12), + DECLARE_FAN_SPEED_RPM_ATTR(3,13), + DECLARE_FAN_SPEED_RPM_ATTR(4,14), + DECLARE_FAN_SPEED_RPM_ATTR(5,15), + DECLARE_FAN_SPEED_RPM_ATTR(6,16), + DECLARE_FAN_PRESENT_ATTR(1), + DECLARE_FAN_PRESENT_ATTR(2), + DECLARE_FAN_PRESENT_ATTR(3), + DECLARE_FAN_PRESENT_ATTR(4), + DECLARE_FAN_PRESENT_ATTR(5), + DECLARE_FAN_PRESENT_ATTR(6), + DECLARE_FAN_DIRECTION_ATTR(1), + DECLARE_FAN_DIRECTION_ATTR(2), + DECLARE_FAN_DIRECTION_ATTR(3), + DECLARE_FAN_DIRECTION_ATTR(4), + DECLARE_FAN_DIRECTION_ATTR(5), + DECLARE_FAN_DIRECTION_ATTR(6), + DECLARE_FAN_DUTY_CYCLE_ATTR(1), + DECLARE_FAN_SYSTEM_TEMP_ATTR(), + NULL +}; + +#define FAN_DUTY_CYCLE_REG_MASK 0xF +#define FAN_MAX_DUTY_CYCLE 100 +#define FAN_REG_VAL_TO_SPEED_RPM_STEP 100 + +static int as7326_56x_fan_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int as7326_56x_fan_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* fan utility functions + */ +static u32 reg_val_to_duty_cycle(u8 reg_val) +{ + reg_val &= FAN_DUTY_CYCLE_REG_MASK; + return ((u32)(reg_val+1) * 625 + 75)/ 100; +} + +static u8 duty_cycle_to_reg_val(u8 duty_cycle) +{ + return ((u32)duty_cycle * 100 / 625) - 1; +} + +static u32 reg_val_to_speed_rpm(u8 reg_val) +{ + return (u32)reg_val * FAN_REG_VAL_TO_SPEED_RPM_STEP; +} + +static u8 reg_val_to_direction(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 1 : 0; +} +static u8 reg_val_to_is_present(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 0 : 1; +} + +static u8 is_fan_fault(struct as7326_56x_fan_data *data, enum fan_id id) +{ + u8 ret = 1; + int front_fan_index = FAN1_FRONT_SPEED_RPM + id; + int rear_fan_index = FAN1_REAR_SPEED_RPM + id; + + /* Check if the speed of front or rear fan is ZERO, + */ + if (reg_val_to_speed_rpm(data->reg_val[front_fan_index]) && + reg_val_to_speed_rpm(data->reg_val[rear_fan_index])) { + ret = 0; + } + + return ret; +} + +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct as7326_56x_fan_data *data = as7326_56x_fan_update_device(dev); + int error, value; + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > 1) + return -EINVAL; + + data->enable = value; + if (value == 0) + { + return set_duty_cycle(dev, da, buf, FAN_MAX_DUTY_CYCLE); + } + return count; +} + + +static ssize_t get_enable(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7326_56x_fan_data *data = as7326_56x_fan_update_device(dev); + + return sprintf(buf, "%u\n", data->enable); +} +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int error, value; + struct i2c_client *client = to_i2c_client(dev); + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0) + return -EINVAL; + + value = (value > FAN_MAX_DUTY_CYCLE)? FAN_MAX_DUTY_CYCLE : value; + + as7326_56x_fan_write_value(client, 0x33, 0); /* Disable fan speed watch dog */ + as7326_56x_fan_write_value(client, fan_reg[FAN_DUTY_CYCLE_PERCENTAGE], duty_cycle_to_reg_val(value)); + return count; +} + +/* Due to this struct is declared at lm75.c, it cannot be include + * under Sonic environment. I duplicate it from lm75.c. + */ +struct lm75_data { + struct i2c_client *client; + struct device *hwmon_dev; + struct thermal_zone_device *tz; + struct mutex update_lock; + u8 orig_conf; + u8 resolution; /* In bits, between 9 and 12 */ + u8 resolution_limits; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + unsigned long sample_time; /* In jiffies */ + s16 temp[3]; /* Register values, + 0 = input + 1 = max + 2 = hyst */ +}; + +/*Copied from lm75.c*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + +/*Get hwmon_dev from i2c_client, set hwmon_dev = NULL is failed.*/ +static struct device * get_hwmon_dev( + struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if(data) + { + if( data->valid == 1 && data->hwmon_dev) + { + return data->hwmon_dev; + } + + } + return NULL; +} + +/* To find hwmon index by opening hwmon under that i2c address. + */ +static int find_hwmon_index_by_FileOpen( + int bus_nr, + unsigned short addr, + OUT int *index) +{ +#define MAX_HWMON_DEVICE (10) /* Find hwmon device in 0~10*/ + struct file *sfd; + char client_name[96]; + int i=0; + + do { + snprintf(client_name, sizeof(client_name), + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + + sfd = filp_open(client_name, O_RDONLY, 0); + i++; + } while( IS_ERR(sfd) && i < MAX_HWMON_DEVICE); + + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", client_name, __LINE__); + return -ENOENT; + } + filp_close(sfd, 0); + *index = i - 1; + return 0; + +#undef MAX_HWMON_DEVICE +} + +static int get_temp_file_path( + int bus_nr, unsigned short addr, + struct device *hwmon_dev + ,char *path, int max_len) +{ + + if(hwmon_dev && strlen(dev_name(hwmon_dev))) + { + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/%s/temp1_input", + bus_nr, addr, dev_name(hwmon_dev)); + } + else + { + int i=0; + if(find_hwmon_index_by_FileOpen( bus_nr, addr, &i)) + { + return -EIO; + } + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + } + return 0; +} + +/*File read the dev file at user space.*/ +static int read_devfile_temp1_input( + struct device *dev, + int bus_nr, + unsigned short addr, + struct device *hwmon_dev, + int *miniCelsius) +{ + struct file *sfd; + char buffer[96]; + char devfile[96]; + int rc, status; + int rdlen, value; + mm_segment_t old_fs; + + rc = 0; + get_temp_file_path(bus_nr, addr, hwmon_dev, devfile, sizeof(devfile)); + sfd = filp_open(devfile, O_RDONLY, 0); + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", devfile, __LINE__); + return -ENOENT; + } + dev_dbg(dev, "Found device:%s\n",devfile); + + if(!(sfd->f_op) || !(sfd->f_op->read) ) { + pr_err("file %s cann't readable ?\n",devfile); + return -ENOENT; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + rdlen = sfd->f_op->read(sfd, buffer, sizeof(buffer), &sfd->f_pos); + if (rdlen == 0) { + pr_err( "File(%s) empty!\n", devfile); + rc = -EIO; + goto exit; + } + status = sscanf(buffer, "%d", &value); + if (status != 1) { + rc = -EIO; + goto exit; + } + *miniCelsius = value; + dev_dbg(dev,"found sensors: %d @i2c %d-%04x\n", value, bus_nr, addr); + +exit: + set_fs(old_fs); + filp_close(sfd, 0); + return rc; +} + +static u8 is_lm75_data_due(struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if (time_after(jiffies, data->last_updated + data->sample_time)) + { + return 1; + } + return 0; +} +static int get_lm75_temp(struct i2c_client *client, int *miniCelsius) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + *miniCelsius = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + +static bool lm75_addr_mached(unsigned short addr) +{ + int i; + unsigned short addrs[] = THERMAL_SENSORS_ADDRS; + + for (i = 0; i < ARRAY_SIZE(addrs); i++) + { + if( addr == addrs[i]) + return 1; + } + return 0; +} + +static int _find_lm75_device(struct device *dev, void *data) +{ + struct device_driver *driver; + struct as7326_56x_fan_data *prv = data; + char *driver_name = THERMAL_SENSORS_DRIVER; + + driver = dev->driver; + if (driver && driver->name && + strcmp(driver->name, driver_name) == 0) + { + struct i2c_client *client; + client = to_i2c_client(dev); + if (client) + { + /*cannot use "struct i2c_adapter *adap = to_i2c_adapter(dev);"*/ + struct i2c_adapter *adap = client->adapter; + int miniCelsius = 0; + + if (! lm75_addr_mached(client->addr)) + { + return 0; + } + + if (!adap) { + return -ENXIO; + } + + /* If the data is not updated, read them from devfile + to drive them updateing data from chip.*/ + if (is_lm75_data_due(client)) + { + struct device *hwmon_dev; + + hwmon_dev = get_hwmon_dev(client); + if(0 == read_devfile_temp1_input(dev, adap->nr, + client->addr, hwmon_dev, &miniCelsius)) + { + prv->system_temp += miniCelsius; + prv->sensors_found++; + } + + } + else + { + get_lm75_temp(client, &miniCelsius); + prv->system_temp += miniCelsius; + prv->sensors_found++; + + } + } + } + return 0; +} + +/*Find all lm75 devices and return sum of temperatures.*/ +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + ssize_t ret = 0; + struct as7326_56x_fan_data *data = as7326_56x_fan_update_device(dev); + + data->system_temp=0; + data->sensors_found=0; + i2c_for_each_dev(data, _find_lm75_device); + if (NUM_THERMAL_SENSORS != data->sensors_found) + { + dev_dbg(dev,"only %d of %d temps are found\n", + data->sensors_found, NUM_THERMAL_SENSORS); + data->system_temp = INT_MAX; + } + ret = sprintf(buf, "%d\n",data->system_temp); + return ret; +} + +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7326_56x_fan_data *data = as7326_56x_fan_update_device(dev); + ssize_t ret = 0; + + if (data->valid) { + switch (attr->index) { + case FAN_DUTY_CYCLE_PERCENTAGE: + { + u32 duty_cycle = reg_val_to_duty_cycle(data->reg_val[FAN_DUTY_CYCLE_PERCENTAGE]); + ret = sprintf(buf, "%u\n", duty_cycle); + break; + } + case FAN1_FRONT_SPEED_RPM: + case FAN2_FRONT_SPEED_RPM: + case FAN3_FRONT_SPEED_RPM: + case FAN4_FRONT_SPEED_RPM: + case FAN5_FRONT_SPEED_RPM: + case FAN6_FRONT_SPEED_RPM: + case FAN1_REAR_SPEED_RPM: + case FAN2_REAR_SPEED_RPM: + case FAN3_REAR_SPEED_RPM: + case FAN4_REAR_SPEED_RPM: + case FAN5_REAR_SPEED_RPM: + case FAN6_REAR_SPEED_RPM: + ret = sprintf(buf, "%u\n", reg_val_to_speed_rpm(data->reg_val[attr->index])); + break; + case FAN1_PRESENT: + case FAN2_PRESENT: + case FAN3_PRESENT: + case FAN4_PRESENT: + case FAN5_PRESENT: + case FAN6_PRESENT: + ret = sprintf(buf, "%d\n", + reg_val_to_is_present(data->reg_val[FAN_PRESENT_REG], + attr->index - FAN1_PRESENT)); + break; + case FAN1_FAULT: + case FAN2_FAULT: + case FAN3_FAULT: + case FAN4_FAULT: + case FAN5_FAULT: + case FAN6_FAULT: + ret = sprintf(buf, "%d\n", is_fan_fault(data, attr->index - FAN1_FAULT)); + break; + case FAN1_DIRECTION: + case FAN2_DIRECTION: + case FAN3_DIRECTION: + case FAN4_DIRECTION: + case FAN5_DIRECTION: + case FAN6_DIRECTION: + ret = sprintf(buf, "%d\n", + reg_val_to_direction(data->reg_val[FAN_DIRECTION_REG], + attr->index - FAN1_DIRECTION)); + break; + default: + break; + } + } + + return ret; +} + +static const struct attribute_group as7326_56x_fan_group = { + .attrs = as7326_56x_fan_attributes, +}; + +static struct as7326_56x_fan_data *as7326_56x_fan_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7326_56x_fan_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || + !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting as7326_56x_fan update\n"); + data->valid = 0; + + /* Update fan data + */ + for (i = 0; i < ARRAY_SIZE(data->reg_val); i++) { + int status = as7326_56x_fan_read_value(client, fan_reg[i]); + + if (status < 0) { + data->valid = 0; + mutex_unlock(&data->update_lock); + dev_dbg(&client->dev, "reg %d, err %d\n", fan_reg[i], status); + return data; + } + else { + data->reg_val[i] = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int as7326_56x_fan_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7326_56x_fan_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7326_56x_fan_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->enable = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7326_56x_fan_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: fan '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7326_56x_fan_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7326_56x_fan_remove(struct i2c_client *client) +{ + struct as7326_56x_fan_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7326_56x_fan_group); + + return 0; +} + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x66, I2C_CLIENT_END }; + +static const struct i2c_device_id as7326_56x_fan_id[] = { + { "as7326_56x_fan", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7326_56x_fan_id); + +static struct i2c_driver as7326_56x_fan_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = DRVNAME, + }, + .probe = as7326_56x_fan_probe, + .remove = as7326_56x_fan_remove, + .id_table = as7326_56x_fan_id, + .address_list = normal_i2c, +}; + +static int __init as7326_56x_fan_init(void) +{ + return i2c_add_driver(&as7326_56x_fan_driver); +} + +static void __exit as7326_56x_fan_exit(void) +{ + i2c_del_driver(&as7326_56x_fan_driver); +} + +module_init(as7326_56x_fan_init); +module_exit(as7326_56x_fan_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7326_56x_fan driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_leds.c b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_leds.c new file mode 100644 index 000000000000..4cb7f1fa25a5 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_leds.c @@ -0,0 +1,438 @@ +/* + * A LED driver for the accton_as7326_56x_led + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +extern int as7326_56x_cpld_read (unsigned short cpld_addr, u8 reg); +extern int as7326_56x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +extern void led_classdev_unregister(struct led_classdev *led_cdev); +extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); +extern void led_classdev_resume(struct led_classdev *led_cdev); +extern void led_classdev_suspend(struct led_classdev *led_cdev); + +#define DRVNAME "accton_as7326_56x_led" + +struct accton_as7326_56x_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[1]; /* only 1 register*/ +}; + +static struct accton_as7326_56x_led_data *ledctl = NULL; + +/* LED related data + */ + +#define LED_CNTRLER_I2C_ADDRESS (0x60) + +#define LED_TYPE_DIAG_REG_MASK (0x3) +#define LED_MODE_DIAG_GREEN_VALUE (0x02) +#define LED_MODE_DIAG_RED_VALUE (0x01) +#define LED_MODE_DIAG_AMBER_VALUE (0x00) /*It's yellow actually. Green+Red=Yellow*/ +#define LED_MODE_DIAG_OFF_VALUE (0x03) + + +#define LED_TYPE_LOC_REG_MASK (0x80) +#define LED_MODE_LOC_ON_VALUE (0) +#define LED_MODE_LOC_OFF_VALUE (0x80) + +enum led_type { + LED_TYPE_DIAG, + LED_TYPE_LOC, + LED_TYPE_FAN, + LED_TYPE_PSU1, + LED_TYPE_PSU2 +}; + +struct led_reg { + u32 types; + u8 reg_addr; +}; + +static const struct led_reg led_reg_map[] = { + {(1<update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting accton_as7326_56x_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = accton_as7326_56x_led_read_value(led_reg_map[i].reg_addr); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg_map[i].reg_addr, status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void accton_as7326_56x_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + enum led_type type) +{ + int reg_val; + u8 reg ; + mutex_lock(&ledctl->update_lock); + + if( !accton_getLedReg(type, ®)) + { + dev_dbg(&ledctl->pdev->dev, "Not match item for %d.\n", type); + } + + reg_val = accton_as7326_56x_led_read_value(reg); + + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + accton_as7326_56x_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + + +static void accton_as7326_56x_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as7326_56x_led_set(led_cdev, led_light_mode, LED_TYPE_DIAG); +} + +static enum led_brightness accton_as7326_56x_led_diag_get(struct led_classdev *cdev) +{ + accton_as7326_56x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void accton_as7326_56x_led_loc_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as7326_56x_led_set(led_cdev, led_light_mode, LED_TYPE_LOC); +} + +static enum led_brightness accton_as7326_56x_led_loc_get(struct led_classdev *cdev) +{ + accton_as7326_56x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_LOC, ledctl->reg_val[0]); +} + +static void accton_as7326_56x_led_auto_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ +} + +static enum led_brightness accton_as7326_56x_led_auto_get(struct led_classdev *cdev) +{ + return LED_MODE_AUTO; +} + +static struct led_classdev accton_as7326_56x_leds[] = { + [LED_TYPE_DIAG] = { + .name = "accton_as7326_56x_led::diag", + .default_trigger = "unused", + .brightness_set = accton_as7326_56x_led_diag_set, + .brightness_get = accton_as7326_56x_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_RED, + }, + [LED_TYPE_LOC] = { + .name = "accton_as7326_56x_led::loc", + .default_trigger = "unused", + .brightness_set = accton_as7326_56x_led_loc_set, + .brightness_get = accton_as7326_56x_led_loc_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_BLUE, + }, + [LED_TYPE_FAN] = { + .name = "accton_as7326_56x_led::fan", + .default_trigger = "unused", + .brightness_set = accton_as7326_56x_led_auto_set, + .brightness_get = accton_as7326_56x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU1] = { + .name = "accton_as7326_56x_led::psu1", + .default_trigger = "unused", + .brightness_set = accton_as7326_56x_led_auto_set, + .brightness_get = accton_as7326_56x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU2] = { + .name = "accton_as7326_56x_led::psu2", + .default_trigger = "unused", + .brightness_set = accton_as7326_56x_led_auto_set, + .brightness_get = accton_as7326_56x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, +}; + +static int accton_as7326_56x_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as7326_56x_leds); i++) { + led_classdev_suspend(&accton_as7326_56x_leds[i]); + } + + return 0; +} + +static int accton_as7326_56x_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as7326_56x_leds); i++) { + led_classdev_resume(&accton_as7326_56x_leds[i]); + } + + return 0; +} + +static int accton_as7326_56x_led_probe(struct platform_device *pdev) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(accton_as7326_56x_leds); i++) { + ret = led_classdev_register(&pdev->dev, &accton_as7326_56x_leds[i]); + + if (ret < 0) + break; + } + + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(accton_as7326_56x_leds)) { + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&accton_as7326_56x_leds[i]); + } + } + + return ret; +} + +static int accton_as7326_56x_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(accton_as7326_56x_leds); i++) { + led_classdev_unregister(&accton_as7326_56x_leds[i]); + } + + return 0; +} + +static struct platform_driver accton_as7326_56x_led_driver = { + .probe = accton_as7326_56x_led_probe, + .remove = accton_as7326_56x_led_remove, + .suspend = accton_as7326_56x_led_suspend, + .resume = accton_as7326_56x_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init accton_as7326_56x_led_init(void) +{ + int ret; + + ret = platform_driver_register(&accton_as7326_56x_led_driver); + if (ret < 0) { + goto exit; + } + + ledctl = kzalloc(sizeof(struct accton_as7326_56x_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&accton_as7326_56x_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&accton_as7326_56x_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return ret; +} + +static void __exit accton_as7326_56x_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&accton_as7326_56x_led_driver); + kfree(ledctl); +} + +module_init(accton_as7326_56x_led_init); +module_exit(accton_as7326_56x_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_as7326_56x_led driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_psu.c b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_psu.c new file mode 100644 index 000000000000..8c2ece6200fe --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_as7326_56x_psu.c @@ -0,0 +1,277 @@ +/* + * An hwmon driver for accton as7326_56x Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, char *buf); +static int as7326_56x_psu_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int as7326_56x_cpld_read(unsigned short cpld_addr, u8 reg); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x50, 0x53, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7326_56x_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ + char model_name[9]; /* Model name, read from eeprom */ +}; + +static struct as7326_56x_psu_data *as7326_56x_psu_update_device(struct device *dev); + +enum as7326_56x_psu_sysfs_attributes { + PSU_PRESENT, + PSU_MODEL_NAME, + PSU_POWER_GOOD +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_present, S_IRUGO, show_status, NULL, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_model_name, S_IRUGO, show_model_name,NULL, PSU_MODEL_NAME); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_status, NULL, PSU_POWER_GOOD); + +static struct attribute *as7326_56x_psu_attributes[] = { + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_model_name.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + NULL +}; + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7326_56x_psu_data *data = as7326_56x_psu_update_device(dev); + u8 status = 0; + + if (attr->index == PSU_PRESENT) { + status = !(data->status >> (1-data->index) & 0x1); + } + else { /* PSU_POWER_GOOD */ + status = (data->status >> (3-data->index) & 0x1); + } + + return sprintf(buf, "%d\n", status); +} + +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7326_56x_psu_data *data = as7326_56x_psu_update_device(dev); + + return sprintf(buf, "%s\n", data->model_name); +} + +static const struct attribute_group as7326_56x_psu_group = { + .attrs = as7326_56x_psu_attributes, +}; + +static int as7326_56x_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7326_56x_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7326_56x_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7326_56x_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7326_56x_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7326_56x_psu_remove(struct i2c_client *client) +{ + struct as7326_56x_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7326_56x_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as7326_56x_psu1, + as7326_56x_psu2 +}; + +static const struct i2c_device_id as7326_56x_psu_id[] = { + { "as7326_56x_psu1", as7326_56x_psu1 }, + { "as7326_56x_psu2", as7326_56x_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7326_56x_psu_id); + +static struct i2c_driver as7326_56x_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7326_56x_psu", + }, + .probe = as7326_56x_psu_probe, + .remove = as7326_56x_psu_remove, + .id_table = as7326_56x_psu_id, + .address_list = normal_i2c, +}; + +static int as7326_56x_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = 0; + int retry_count = 5; + + while (retry_count) { + retry_count--; + + result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) { + msleep(10); + continue; + } + + if (unlikely(result != data_len)) { + result = -EIO; + msleep(10); + continue; + } + + result = 0; + break; + } + + return result; +} + +static struct as7326_56x_psu_data *as7326_56x_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7326_56x_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status; + int power_good = 0; + + dev_dbg(&client->dev, "Starting as7326_56x update\n"); + + /* Read psu status */ + status = as7326_56x_cpld_read(0x60, 0x2); + + if (status < 0) { + dev_dbg(&client->dev, "cpld reg 0x60 err %d\n", status); + } + else { + data->status = status; + } + + /* Read model name */ + memset(data->model_name, 0, sizeof(data->model_name)); + power_good = (data->status >> (3-data->index) & 0x1); + + if (power_good) { + status = as7326_56x_psu_read_block(client, 0x20, data->model_name, + ARRAY_SIZE(data->model_name)-1); + + if (status < 0) { + data->model_name[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x)\n", client->addr); + } + else { + data->model_name[ARRAY_SIZE(data->model_name)-1] = '\0'; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +module_i2c_driver(as7326_56x_psu_driver); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7326_56x_psu driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_i2c_cpld.c b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_i2c_cpld.c new file mode 100644 index 000000000000..2274c4a934c0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/accton_i2c_cpld.c @@ -0,0 +1,1080 @@ +/* + * Copyright (C) Brandon Chuang + * + * This module supports the accton cpld that hold the channel select + * mechanism for other i2c slave devices, such as SFP. + * This includes the: + * Accton as7326_56x CPLD1/CPLD2/CPLD3 + * + * Based on: + * pca954x.c from Kumar Gala + * Copyright (C) 2006 + * + * Based on: + * pca954x.c from Ken Harrenstien + * Copyright (C) 2004 Google, Inc. (Ken Harrenstien) + * + * Based on: + * i2c-virtual_cb.c from Brian Kuschak + * and + * pca9540.c from Jean Delvare . + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +enum cpld_type { + as7326_56x_cpld1, + as7326_56x_cpld2, + as7326_56x_cpld3 +}; + +struct as7326_56x_cpld_data { + enum cpld_type type; + struct device *hwmon_dev; + struct mutex update_lock; +}; + +static const struct i2c_device_id as7326_56x_cpld_id[] = { + { "as7326_56x_cpld1", as7326_56x_cpld1 }, + { "as7326_56x_cpld2", as7326_56x_cpld2 }, + { "as7326_56x_cpld3", as7326_56x_cpld3 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, as7326_56x_cpld_id); + +#define TRANSCEIVER_PRESENT_ATTR_ID(index) MODULE_PRESENT_##index +#define TRANSCEIVER_TXDISABLE_ATTR_ID(index) MODULE_TXDISABLE_##index +#define TRANSCEIVER_RXLOS_ATTR_ID(index) MODULE_RXLOS_##index +#define TRANSCEIVER_TXFAULT_ATTR_ID(index) MODULE_TXFAULT_##index +#define TRANSCEIVER_RESET_ATTR_ID(index) MODULE_RESET_##index + +enum as7326_56x_cpld_sysfs_attributes { + CPLD_VERSION, + ACCESS, + MODULE_PRESENT_ALL, + MODULE_RXLOS_ALL, + /* transceiver attributes */ + TRANSCEIVER_PRESENT_ATTR_ID(1), + TRANSCEIVER_PRESENT_ATTR_ID(2), + TRANSCEIVER_PRESENT_ATTR_ID(3), + TRANSCEIVER_PRESENT_ATTR_ID(4), + TRANSCEIVER_PRESENT_ATTR_ID(5), + TRANSCEIVER_PRESENT_ATTR_ID(6), + TRANSCEIVER_PRESENT_ATTR_ID(7), + TRANSCEIVER_PRESENT_ATTR_ID(8), + TRANSCEIVER_PRESENT_ATTR_ID(9), + TRANSCEIVER_PRESENT_ATTR_ID(10), + TRANSCEIVER_PRESENT_ATTR_ID(11), + TRANSCEIVER_PRESENT_ATTR_ID(12), + TRANSCEIVER_PRESENT_ATTR_ID(13), + TRANSCEIVER_PRESENT_ATTR_ID(14), + TRANSCEIVER_PRESENT_ATTR_ID(15), + TRANSCEIVER_PRESENT_ATTR_ID(16), + TRANSCEIVER_PRESENT_ATTR_ID(17), + TRANSCEIVER_PRESENT_ATTR_ID(18), + TRANSCEIVER_PRESENT_ATTR_ID(19), + TRANSCEIVER_PRESENT_ATTR_ID(20), + TRANSCEIVER_PRESENT_ATTR_ID(21), + TRANSCEIVER_PRESENT_ATTR_ID(22), + TRANSCEIVER_PRESENT_ATTR_ID(23), + TRANSCEIVER_PRESENT_ATTR_ID(24), + TRANSCEIVER_PRESENT_ATTR_ID(25), + TRANSCEIVER_PRESENT_ATTR_ID(26), + TRANSCEIVER_PRESENT_ATTR_ID(27), + TRANSCEIVER_PRESENT_ATTR_ID(28), + TRANSCEIVER_PRESENT_ATTR_ID(29), + TRANSCEIVER_PRESENT_ATTR_ID(30), + TRANSCEIVER_PRESENT_ATTR_ID(31), + TRANSCEIVER_PRESENT_ATTR_ID(32), + TRANSCEIVER_PRESENT_ATTR_ID(33), + TRANSCEIVER_PRESENT_ATTR_ID(34), + TRANSCEIVER_PRESENT_ATTR_ID(35), + TRANSCEIVER_PRESENT_ATTR_ID(36), + TRANSCEIVER_PRESENT_ATTR_ID(37), + TRANSCEIVER_PRESENT_ATTR_ID(38), + TRANSCEIVER_PRESENT_ATTR_ID(39), + TRANSCEIVER_PRESENT_ATTR_ID(40), + TRANSCEIVER_PRESENT_ATTR_ID(41), + TRANSCEIVER_PRESENT_ATTR_ID(42), + TRANSCEIVER_PRESENT_ATTR_ID(43), + TRANSCEIVER_PRESENT_ATTR_ID(44), + TRANSCEIVER_PRESENT_ATTR_ID(45), + TRANSCEIVER_PRESENT_ATTR_ID(46), + TRANSCEIVER_PRESENT_ATTR_ID(47), + TRANSCEIVER_PRESENT_ATTR_ID(48), + TRANSCEIVER_PRESENT_ATTR_ID(49), + TRANSCEIVER_PRESENT_ATTR_ID(50), + TRANSCEIVER_PRESENT_ATTR_ID(51), + TRANSCEIVER_PRESENT_ATTR_ID(52), + TRANSCEIVER_PRESENT_ATTR_ID(53), + TRANSCEIVER_PRESENT_ATTR_ID(54), + TRANSCEIVER_PRESENT_ATTR_ID(55), + TRANSCEIVER_PRESENT_ATTR_ID(56), + TRANSCEIVER_PRESENT_ATTR_ID(57), + TRANSCEIVER_PRESENT_ATTR_ID(58), + TRANSCEIVER_TXDISABLE_ATTR_ID(1), + TRANSCEIVER_TXDISABLE_ATTR_ID(2), + TRANSCEIVER_TXDISABLE_ATTR_ID(3), + TRANSCEIVER_TXDISABLE_ATTR_ID(4), + TRANSCEIVER_TXDISABLE_ATTR_ID(5), + TRANSCEIVER_TXDISABLE_ATTR_ID(6), + TRANSCEIVER_TXDISABLE_ATTR_ID(7), + TRANSCEIVER_TXDISABLE_ATTR_ID(8), + TRANSCEIVER_TXDISABLE_ATTR_ID(9), + TRANSCEIVER_TXDISABLE_ATTR_ID(10), + TRANSCEIVER_TXDISABLE_ATTR_ID(11), + TRANSCEIVER_TXDISABLE_ATTR_ID(12), + TRANSCEIVER_TXDISABLE_ATTR_ID(13), + TRANSCEIVER_TXDISABLE_ATTR_ID(14), + TRANSCEIVER_TXDISABLE_ATTR_ID(15), + TRANSCEIVER_TXDISABLE_ATTR_ID(16), + TRANSCEIVER_TXDISABLE_ATTR_ID(17), + TRANSCEIVER_TXDISABLE_ATTR_ID(18), + TRANSCEIVER_TXDISABLE_ATTR_ID(19), + TRANSCEIVER_TXDISABLE_ATTR_ID(20), + TRANSCEIVER_TXDISABLE_ATTR_ID(21), + TRANSCEIVER_TXDISABLE_ATTR_ID(22), + TRANSCEIVER_TXDISABLE_ATTR_ID(23), + TRANSCEIVER_TXDISABLE_ATTR_ID(24), + TRANSCEIVER_TXDISABLE_ATTR_ID(25), + TRANSCEIVER_TXDISABLE_ATTR_ID(26), + TRANSCEIVER_TXDISABLE_ATTR_ID(27), + TRANSCEIVER_TXDISABLE_ATTR_ID(28), + TRANSCEIVER_TXDISABLE_ATTR_ID(29), + TRANSCEIVER_TXDISABLE_ATTR_ID(30), + TRANSCEIVER_TXDISABLE_ATTR_ID(31), + TRANSCEIVER_TXDISABLE_ATTR_ID(32), + TRANSCEIVER_TXDISABLE_ATTR_ID(33), + TRANSCEIVER_TXDISABLE_ATTR_ID(34), + TRANSCEIVER_TXDISABLE_ATTR_ID(35), + TRANSCEIVER_TXDISABLE_ATTR_ID(36), + TRANSCEIVER_TXDISABLE_ATTR_ID(37), + TRANSCEIVER_TXDISABLE_ATTR_ID(38), + TRANSCEIVER_TXDISABLE_ATTR_ID(39), + TRANSCEIVER_TXDISABLE_ATTR_ID(40), + TRANSCEIVER_TXDISABLE_ATTR_ID(41), + TRANSCEIVER_TXDISABLE_ATTR_ID(42), + TRANSCEIVER_TXDISABLE_ATTR_ID(43), + TRANSCEIVER_TXDISABLE_ATTR_ID(44), + TRANSCEIVER_TXDISABLE_ATTR_ID(45), + TRANSCEIVER_TXDISABLE_ATTR_ID(46), + TRANSCEIVER_TXDISABLE_ATTR_ID(47), + TRANSCEIVER_TXDISABLE_ATTR_ID(48), + TRANSCEIVER_TXDISABLE_ATTR_ID(57), + TRANSCEIVER_TXDISABLE_ATTR_ID(58), + TRANSCEIVER_RXLOS_ATTR_ID(1), + TRANSCEIVER_RXLOS_ATTR_ID(2), + TRANSCEIVER_RXLOS_ATTR_ID(3), + TRANSCEIVER_RXLOS_ATTR_ID(4), + TRANSCEIVER_RXLOS_ATTR_ID(5), + TRANSCEIVER_RXLOS_ATTR_ID(6), + TRANSCEIVER_RXLOS_ATTR_ID(7), + TRANSCEIVER_RXLOS_ATTR_ID(8), + TRANSCEIVER_RXLOS_ATTR_ID(9), + TRANSCEIVER_RXLOS_ATTR_ID(10), + TRANSCEIVER_RXLOS_ATTR_ID(11), + TRANSCEIVER_RXLOS_ATTR_ID(12), + TRANSCEIVER_RXLOS_ATTR_ID(13), + TRANSCEIVER_RXLOS_ATTR_ID(14), + TRANSCEIVER_RXLOS_ATTR_ID(15), + TRANSCEIVER_RXLOS_ATTR_ID(16), + TRANSCEIVER_RXLOS_ATTR_ID(17), + TRANSCEIVER_RXLOS_ATTR_ID(18), + TRANSCEIVER_RXLOS_ATTR_ID(19), + TRANSCEIVER_RXLOS_ATTR_ID(20), + TRANSCEIVER_RXLOS_ATTR_ID(21), + TRANSCEIVER_RXLOS_ATTR_ID(22), + TRANSCEIVER_RXLOS_ATTR_ID(23), + TRANSCEIVER_RXLOS_ATTR_ID(24), + TRANSCEIVER_RXLOS_ATTR_ID(25), + TRANSCEIVER_RXLOS_ATTR_ID(26), + TRANSCEIVER_RXLOS_ATTR_ID(27), + TRANSCEIVER_RXLOS_ATTR_ID(28), + TRANSCEIVER_RXLOS_ATTR_ID(29), + TRANSCEIVER_RXLOS_ATTR_ID(30), + TRANSCEIVER_RXLOS_ATTR_ID(31), + TRANSCEIVER_RXLOS_ATTR_ID(32), + TRANSCEIVER_RXLOS_ATTR_ID(33), + TRANSCEIVER_RXLOS_ATTR_ID(34), + TRANSCEIVER_RXLOS_ATTR_ID(35), + TRANSCEIVER_RXLOS_ATTR_ID(36), + TRANSCEIVER_RXLOS_ATTR_ID(37), + TRANSCEIVER_RXLOS_ATTR_ID(38), + TRANSCEIVER_RXLOS_ATTR_ID(39), + TRANSCEIVER_RXLOS_ATTR_ID(40), + TRANSCEIVER_RXLOS_ATTR_ID(41), + TRANSCEIVER_RXLOS_ATTR_ID(42), + TRANSCEIVER_RXLOS_ATTR_ID(43), + TRANSCEIVER_RXLOS_ATTR_ID(44), + TRANSCEIVER_RXLOS_ATTR_ID(45), + TRANSCEIVER_RXLOS_ATTR_ID(46), + TRANSCEIVER_RXLOS_ATTR_ID(47), + TRANSCEIVER_RXLOS_ATTR_ID(48), + TRANSCEIVER_RXLOS_ATTR_ID(57), + TRANSCEIVER_RXLOS_ATTR_ID(58), + TRANSCEIVER_TXFAULT_ATTR_ID(1), + TRANSCEIVER_TXFAULT_ATTR_ID(2), + TRANSCEIVER_TXFAULT_ATTR_ID(3), + TRANSCEIVER_TXFAULT_ATTR_ID(4), + TRANSCEIVER_TXFAULT_ATTR_ID(5), + TRANSCEIVER_TXFAULT_ATTR_ID(6), + TRANSCEIVER_TXFAULT_ATTR_ID(7), + TRANSCEIVER_TXFAULT_ATTR_ID(8), + TRANSCEIVER_TXFAULT_ATTR_ID(9), + TRANSCEIVER_TXFAULT_ATTR_ID(10), + TRANSCEIVER_TXFAULT_ATTR_ID(11), + TRANSCEIVER_TXFAULT_ATTR_ID(12), + TRANSCEIVER_TXFAULT_ATTR_ID(13), + TRANSCEIVER_TXFAULT_ATTR_ID(14), + TRANSCEIVER_TXFAULT_ATTR_ID(15), + TRANSCEIVER_TXFAULT_ATTR_ID(16), + TRANSCEIVER_TXFAULT_ATTR_ID(17), + TRANSCEIVER_TXFAULT_ATTR_ID(18), + TRANSCEIVER_TXFAULT_ATTR_ID(19), + TRANSCEIVER_TXFAULT_ATTR_ID(20), + TRANSCEIVER_TXFAULT_ATTR_ID(21), + TRANSCEIVER_TXFAULT_ATTR_ID(22), + TRANSCEIVER_TXFAULT_ATTR_ID(23), + TRANSCEIVER_TXFAULT_ATTR_ID(24), + TRANSCEIVER_TXFAULT_ATTR_ID(25), + TRANSCEIVER_TXFAULT_ATTR_ID(26), + TRANSCEIVER_TXFAULT_ATTR_ID(27), + TRANSCEIVER_TXFAULT_ATTR_ID(28), + TRANSCEIVER_TXFAULT_ATTR_ID(29), + TRANSCEIVER_TXFAULT_ATTR_ID(30), + TRANSCEIVER_TXFAULT_ATTR_ID(31), + TRANSCEIVER_TXFAULT_ATTR_ID(32), + TRANSCEIVER_TXFAULT_ATTR_ID(33), + TRANSCEIVER_TXFAULT_ATTR_ID(34), + TRANSCEIVER_TXFAULT_ATTR_ID(35), + TRANSCEIVER_TXFAULT_ATTR_ID(36), + TRANSCEIVER_TXFAULT_ATTR_ID(37), + TRANSCEIVER_TXFAULT_ATTR_ID(38), + TRANSCEIVER_TXFAULT_ATTR_ID(39), + TRANSCEIVER_TXFAULT_ATTR_ID(40), + TRANSCEIVER_TXFAULT_ATTR_ID(41), + TRANSCEIVER_TXFAULT_ATTR_ID(42), + TRANSCEIVER_TXFAULT_ATTR_ID(43), + TRANSCEIVER_TXFAULT_ATTR_ID(44), + TRANSCEIVER_TXFAULT_ATTR_ID(45), + TRANSCEIVER_TXFAULT_ATTR_ID(46), + TRANSCEIVER_TXFAULT_ATTR_ID(47), + TRANSCEIVER_TXFAULT_ATTR_ID(48), + TRANSCEIVER_TXFAULT_ATTR_ID(57), + TRANSCEIVER_TXFAULT_ATTR_ID(58), +}; + +/* sysfs attributes for hwmon + */ +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_rxlos_all(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf); +static int as7326_56x_cpld_read_internal(struct i2c_client *client, u8 reg); +static int as7326_56x_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value); + +/* transceiver attributes */ +#define DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_present_##index, S_IRUGO, show_status, NULL, MODULE_PRESENT_##index) +#define DECLARE_TRANSCEIVER_PRESENT_ATTR(index) &sensor_dev_attr_module_present_##index.dev_attr.attr + +#define DECLARE_TRANSCEIVER_RESET_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_reset_##index, S_IRUGO | S_IWUSR, show_status, set_reset, MODULE_RESET_##index) +#define DECLARE_TRANSCEIVER_RESET_ATTR(index) &sensor_dev_attr_module_reset_##index.dev_attr.attr + +#define DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_tx_disable_##index, S_IRUGO | S_IWUSR, show_status, set_tx_disable, MODULE_TXDISABLE_##index); \ + static SENSOR_DEVICE_ATTR(module_rx_los_##index, S_IRUGO, show_status, NULL, MODULE_RXLOS_##index); \ + static SENSOR_DEVICE_ATTR(module_tx_fault_##index, S_IRUGO, show_status, NULL, MODULE_TXFAULT_##index) +#define DECLARE_SFP_TRANSCEIVER_ATTR(index) \ + &sensor_dev_attr_module_tx_disable_##index.dev_attr.attr, \ + &sensor_dev_attr_module_rx_los_##index.dev_attr.attr, \ + &sensor_dev_attr_module_tx_fault_##index.dev_attr.attr + +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(access, S_IWUSR, NULL, access, ACCESS); +/* transceiver attributes */ +static SENSOR_DEVICE_ATTR(module_present_all, S_IRUGO, show_present_all, NULL, MODULE_PRESENT_ALL); +static SENSOR_DEVICE_ATTR(module_rx_los_all, S_IRUGO, show_rxlos_all, NULL, MODULE_RXLOS_ALL); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(1); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(2); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(3); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(4); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(5); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(6); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(7); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(8); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(9); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(10); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(11); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(12); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(13); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(14); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(15); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(16); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(17); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(18); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(19); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(20); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(21); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(22); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(23); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(24); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(25); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(26); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(27); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(28); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(29); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(30); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(31); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(32); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(33); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(34); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(35); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(36); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(37); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(38); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(39); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(40); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(41); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(42); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(43); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(44); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(45); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(46); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(47); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(48); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(49); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(50); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(51); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(52); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(53); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(54); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(55); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(56); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(57); +DECLARE_TRANSCEIVER_PRESENT_SENSOR_DEVICE_ATTR(58); + +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(1); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(2); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(3); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(4); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(5); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(6); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(7); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(8); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(9); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(10); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(11); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(12); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(13); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(14); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(15); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(16); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(17); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(18); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(19); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(20); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(21); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(22); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(23); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(24); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(25); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(26); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(27); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(28); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(29); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(30); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(31); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(32); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(33); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(34); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(35); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(36); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(37); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(38); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(39); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(40); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(41); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(42); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(43); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(44); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(45); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(46); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(47); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(48); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(57); +DECLARE_SFP_TRANSCEIVER_SENSOR_DEVICE_ATTR(58); + +static struct attribute *as7326_56x_cpld3_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + NULL +}; + +static const struct attribute_group as7326_56x_cpld3_group = { + .attrs = as7326_56x_cpld3_attributes, +}; + +static struct attribute *as7326_56x_cpld2_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + /* transceiver attributes */ + &sensor_dev_attr_module_present_all.dev_attr.attr, + &sensor_dev_attr_module_rx_los_all.dev_attr.attr, + DECLARE_TRANSCEIVER_PRESENT_ATTR(1), + DECLARE_TRANSCEIVER_PRESENT_ATTR(2), + DECLARE_TRANSCEIVER_PRESENT_ATTR(3), + DECLARE_TRANSCEIVER_PRESENT_ATTR(4), + DECLARE_TRANSCEIVER_PRESENT_ATTR(5), + DECLARE_TRANSCEIVER_PRESENT_ATTR(6), + DECLARE_TRANSCEIVER_PRESENT_ATTR(7), + DECLARE_TRANSCEIVER_PRESENT_ATTR(8), + DECLARE_TRANSCEIVER_PRESENT_ATTR(9), + DECLARE_TRANSCEIVER_PRESENT_ATTR(10), + DECLARE_TRANSCEIVER_PRESENT_ATTR(11), + DECLARE_TRANSCEIVER_PRESENT_ATTR(12), + DECLARE_TRANSCEIVER_PRESENT_ATTR(13), + DECLARE_TRANSCEIVER_PRESENT_ATTR(14), + DECLARE_TRANSCEIVER_PRESENT_ATTR(15), + DECLARE_TRANSCEIVER_PRESENT_ATTR(16), + DECLARE_TRANSCEIVER_PRESENT_ATTR(17), + DECLARE_TRANSCEIVER_PRESENT_ATTR(18), + DECLARE_TRANSCEIVER_PRESENT_ATTR(19), + DECLARE_TRANSCEIVER_PRESENT_ATTR(20), + DECLARE_TRANSCEIVER_PRESENT_ATTR(21), + DECLARE_TRANSCEIVER_PRESENT_ATTR(22), + DECLARE_TRANSCEIVER_PRESENT_ATTR(23), + DECLARE_TRANSCEIVER_PRESENT_ATTR(24), + DECLARE_TRANSCEIVER_PRESENT_ATTR(25), + DECLARE_TRANSCEIVER_PRESENT_ATTR(26), + DECLARE_TRANSCEIVER_PRESENT_ATTR(27), + DECLARE_TRANSCEIVER_PRESENT_ATTR(28), + DECLARE_TRANSCEIVER_PRESENT_ATTR(29), + DECLARE_TRANSCEIVER_PRESENT_ATTR(30), + DECLARE_SFP_TRANSCEIVER_ATTR(1), + DECLARE_SFP_TRANSCEIVER_ATTR(2), + DECLARE_SFP_TRANSCEIVER_ATTR(3), + DECLARE_SFP_TRANSCEIVER_ATTR(4), + DECLARE_SFP_TRANSCEIVER_ATTR(5), + DECLARE_SFP_TRANSCEIVER_ATTR(6), + DECLARE_SFP_TRANSCEIVER_ATTR(7), + DECLARE_SFP_TRANSCEIVER_ATTR(8), + DECLARE_SFP_TRANSCEIVER_ATTR(9), + DECLARE_SFP_TRANSCEIVER_ATTR(10), + DECLARE_SFP_TRANSCEIVER_ATTR(11), + DECLARE_SFP_TRANSCEIVER_ATTR(12), + DECLARE_SFP_TRANSCEIVER_ATTR(13), + DECLARE_SFP_TRANSCEIVER_ATTR(14), + DECLARE_SFP_TRANSCEIVER_ATTR(15), + DECLARE_SFP_TRANSCEIVER_ATTR(16), + DECLARE_SFP_TRANSCEIVER_ATTR(17), + DECLARE_SFP_TRANSCEIVER_ATTR(18), + DECLARE_SFP_TRANSCEIVER_ATTR(19), + DECLARE_SFP_TRANSCEIVER_ATTR(20), + DECLARE_SFP_TRANSCEIVER_ATTR(21), + DECLARE_SFP_TRANSCEIVER_ATTR(22), + DECLARE_SFP_TRANSCEIVER_ATTR(23), + DECLARE_SFP_TRANSCEIVER_ATTR(24), + DECLARE_SFP_TRANSCEIVER_ATTR(25), + DECLARE_SFP_TRANSCEIVER_ATTR(26), + DECLARE_SFP_TRANSCEIVER_ATTR(27), + DECLARE_SFP_TRANSCEIVER_ATTR(28), + DECLARE_SFP_TRANSCEIVER_ATTR(29), + DECLARE_SFP_TRANSCEIVER_ATTR(30), + NULL +}; + +static const struct attribute_group as7326_56x_cpld2_group = { + .attrs = as7326_56x_cpld2_attributes, +}; + +static struct attribute *as7326_56x_cpld1_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + /* transceiver attributes */ + &sensor_dev_attr_module_present_all.dev_attr.attr, + &sensor_dev_attr_module_rx_los_all.dev_attr.attr, + DECLARE_TRANSCEIVER_PRESENT_ATTR(31), + DECLARE_TRANSCEIVER_PRESENT_ATTR(32), + DECLARE_TRANSCEIVER_PRESENT_ATTR(33), + DECLARE_TRANSCEIVER_PRESENT_ATTR(34), + DECLARE_TRANSCEIVER_PRESENT_ATTR(35), + DECLARE_TRANSCEIVER_PRESENT_ATTR(36), + DECLARE_TRANSCEIVER_PRESENT_ATTR(37), + DECLARE_TRANSCEIVER_PRESENT_ATTR(38), + DECLARE_TRANSCEIVER_PRESENT_ATTR(39), + DECLARE_TRANSCEIVER_PRESENT_ATTR(40), + DECLARE_TRANSCEIVER_PRESENT_ATTR(41), + DECLARE_TRANSCEIVER_PRESENT_ATTR(42), + DECLARE_TRANSCEIVER_PRESENT_ATTR(43), + DECLARE_TRANSCEIVER_PRESENT_ATTR(44), + DECLARE_TRANSCEIVER_PRESENT_ATTR(45), + DECLARE_TRANSCEIVER_PRESENT_ATTR(46), + DECLARE_TRANSCEIVER_PRESENT_ATTR(47), + DECLARE_TRANSCEIVER_PRESENT_ATTR(48), + DECLARE_TRANSCEIVER_PRESENT_ATTR(49), + DECLARE_TRANSCEIVER_PRESENT_ATTR(50), + DECLARE_TRANSCEIVER_PRESENT_ATTR(51), + DECLARE_TRANSCEIVER_PRESENT_ATTR(52), + DECLARE_TRANSCEIVER_PRESENT_ATTR(53), + DECLARE_TRANSCEIVER_PRESENT_ATTR(54), + DECLARE_TRANSCEIVER_PRESENT_ATTR(55), + DECLARE_TRANSCEIVER_PRESENT_ATTR(56), + DECLARE_TRANSCEIVER_PRESENT_ATTR(57), + DECLARE_TRANSCEIVER_PRESENT_ATTR(58), + DECLARE_SFP_TRANSCEIVER_ATTR(31), + DECLARE_SFP_TRANSCEIVER_ATTR(32), + DECLARE_SFP_TRANSCEIVER_ATTR(33), + DECLARE_SFP_TRANSCEIVER_ATTR(34), + DECLARE_SFP_TRANSCEIVER_ATTR(35), + DECLARE_SFP_TRANSCEIVER_ATTR(36), + DECLARE_SFP_TRANSCEIVER_ATTR(37), + DECLARE_SFP_TRANSCEIVER_ATTR(38), + DECLARE_SFP_TRANSCEIVER_ATTR(39), + DECLARE_SFP_TRANSCEIVER_ATTR(40), + DECLARE_SFP_TRANSCEIVER_ATTR(41), + DECLARE_SFP_TRANSCEIVER_ATTR(42), + DECLARE_SFP_TRANSCEIVER_ATTR(43), + DECLARE_SFP_TRANSCEIVER_ATTR(44), + DECLARE_SFP_TRANSCEIVER_ATTR(45), + DECLARE_SFP_TRANSCEIVER_ATTR(46), + DECLARE_SFP_TRANSCEIVER_ATTR(47), + DECLARE_SFP_TRANSCEIVER_ATTR(48), + DECLARE_SFP_TRANSCEIVER_ATTR(57), + DECLARE_SFP_TRANSCEIVER_ATTR(58), + NULL +}; + +static const struct attribute_group as7326_56x_cpld1_group = { + .attrs = as7326_56x_cpld1_attributes, +}; + +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf) +{ + int i, status; + u8 values[4] = {0}; + u8 regs[] = {0x9, 0xA, 0xB, 0x18}; + struct i2c_client *client = to_i2c_client(dev); + struct as7326_56x_cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = as7326_56x_cpld_read_internal(client, regs[i]); + + if (status < 0) { + goto exit; + } + + values[i] = ~(u8)status; + } + + mutex_unlock(&data->update_lock); + + /* Return values 1 -> 56 in order */ + if (data->type == as7326_56x_cpld2) { + values[3] &= 0xF; + } + else { /* as7326_56x_cpld3 */ + values[3] &= 0x3; + } + + return sprintf(buf, "%.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], values[3]); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_rxlos_all(struct device *dev, struct device_attribute *da, + char *buf) +{ + int i, status; + u8 values[3] = {0}; + u8 regs[] = {0x12, 0x13, 0x14}; + struct i2c_client *client = to_i2c_client(dev); + struct as7326_56x_cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = as7326_56x_cpld_read_internal(client, regs[i]); + + if (status < 0) { + goto exit; + } + + values[i] = (u8)status; + } + + mutex_unlock(&data->update_lock); + + /* Return values 1 -> 24 in order */ + return sprintf(buf, "%.2x %.2x %.2x\n", values[0], values[1], values[2]); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7326_56x_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0, revert = 0; + + switch (attr->index) { + case MODULE_PRESENT_1 ... MODULE_PRESENT_30: + reg = 0x0f + (attr->index-MODULE_PRESENT_1)/8; + mask = 0x1 << ((attr->index - MODULE_PRESENT_1)%8); + break; + case MODULE_PRESENT_31 ... MODULE_PRESENT_48: + reg = 0x10 + (attr->index-MODULE_PRESENT_31)/8; + mask = 0x1 << ((attr->index - MODULE_PRESENT_31)%8); + break; + case MODULE_PRESENT_57 ... MODULE_PRESENT_58: + reg = 0x12; + mask = 0x1 << (( MODULE_PRESENT_58 - attr->index)+2); + break; + case MODULE_PRESENT_49 ... MODULE_PRESENT_56: /*QSFP*/ + reg = 0x13 ; + mask = 0x1 << ((attr->index - MODULE_PRESENT_49)%8); + break; + case MODULE_TXFAULT_1 ... MODULE_TXFAULT_30: + reg = 0x03 + (attr->index - MODULE_TXFAULT_1)/8; + mask = 0x1 << ((attr->index - MODULE_TXFAULT_1)%8); + break; + case MODULE_TXFAULT_31 ... MODULE_TXFAULT_48: + reg = 0x1a + (attr->index-MODULE_TXFAULT_31)/8; + mask = 0x1 << ((attr->index - MODULE_TXFAULT_31)%8); + break; + case MODULE_TXFAULT_57 ... MODULE_TXFAULT_58: + reg = 0x1c; + mask = 0x1 << (( attr->index - MODULE_TXFAULT_57)+2); + break; + case MODULE_TXDISABLE_1 ... MODULE_TXDISABLE_30: + reg = 0x07 + (attr->index - MODULE_TXDISABLE_1)/8; + mask = 0x1 << ((attr->index - MODULE_TXDISABLE_1)%8); + break; + case MODULE_TXDISABLE_31 ... MODULE_TXDISABLE_48: + reg = 0x14 + (attr->index-MODULE_TXDISABLE_31)/8; + mask = 0x1 << ((attr->index - MODULE_TXDISABLE_31)%8); + break; + case MODULE_TXDISABLE_57 ... MODULE_TXDISABLE_58: + reg = 0x16; + mask = 0x1 << ((attr->index - MODULE_TXDISABLE_57)+2); + break; + case MODULE_RXLOS_1 ... MODULE_RXLOS_30: + reg = 0x0b + (attr->index - MODULE_RXLOS_1)/8; + mask = 0x1 << ((attr->index - MODULE_RXLOS_1)%8); + break; + case MODULE_RXLOS_31 ... MODULE_RXLOS_48: + reg = 0x17 + (attr->index-MODULE_RXLOS_31)/8; + mask = 0x1 << ((attr->index - MODULE_RXLOS_31)%8); + break; + case MODULE_RXLOS_57 ... MODULE_RXLOS_58: + reg = 0x19; + mask = 0x1 << (( attr->index - MODULE_RXLOS_57)+2); + break; + default: + return 0; + } + + if (attr->index >= MODULE_PRESENT_1 && attr->index <= MODULE_PRESENT_56) { + revert = 1; + } + + mutex_lock(&data->update_lock); + status = as7326_56x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", revert ? !(status & mask) : !!(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7326_56x_cpld_data *data = i2c_get_clientdata(client); + long disable; + int status; + u8 reg = 0, mask = 0; + + status = kstrtol(buf, 10, &disable); + if (status) { + return status; + } + + switch (attr->index) { + case MODULE_TXDISABLE_1 ... MODULE_TXDISABLE_30: + reg = 0x07 + (attr->index - MODULE_TXDISABLE_1)/8; + mask = 0x1 << ((attr->index - MODULE_TXDISABLE_1)%8); + break; + case MODULE_TXDISABLE_31 ... MODULE_TXDISABLE_48: + reg = 0x14 + (attr->index - MODULE_TXDISABLE_31)/8; + mask = 0x1 << ((attr->index - MODULE_TXDISABLE_31)%8); + break; + case MODULE_TXDISABLE_57 ... MODULE_TXDISABLE_58: + reg = 0x16; + mask = 0x1 << ((attr->index - MODULE_TXDISABLE_57)+2); + break; + default: + return 0; + } + + /* Read current status */ + mutex_lock(&data->update_lock); + status = as7326_56x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + + /* Update tx_disable status */ + if (disable) { + status |= mask; + } + else { + status &= ~mask; + } + + status = as7326_56x_cpld_write_internal(client, reg, status); + if (unlikely(status < 0)) { + goto exit; + } + + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int status; + u32 addr, val; + struct i2c_client *client = to_i2c_client(dev); + struct as7326_56x_cpld_data *data = i2c_get_clientdata(client); + + if (sscanf(buf, "0x%x 0x%x", &addr, &val) != 2) { + return -EINVAL; + } + + if (addr > 0xFF || val > 0xFF) { + return -EINVAL; + } + + mutex_lock(&data->update_lock); + status = as7326_56x_cpld_write_internal(client, addr, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static void as7326_56x_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void as7326_56x_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static ssize_t show_version(struct device *dev, struct device_attribute *attr, char *buf) +{ + int val = 0; + struct i2c_client *client = to_i2c_client(dev); + + val = i2c_smbus_read_byte_data(client, 0x1); + + if (val < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x1) err %d\n", client->addr, val); + } + + return sprintf(buf, "%d", val); +} + +/* + * I2C init/probing/exit functions + */ +static int as7326_56x_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); + struct as7326_56x_cpld_data *data; + int ret = -ENODEV; + const struct attribute_group *group = NULL; + + if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE)) + goto exit; + + data = kzalloc(sizeof(struct as7326_56x_cpld_data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->type = id->driver_data; + + /* Register sysfs hooks */ + switch (data->type) { + case as7326_56x_cpld1: + group = &as7326_56x_cpld1_group; + break; + case as7326_56x_cpld2: + group = &as7326_56x_cpld2_group; + break; + case as7326_56x_cpld3: + group = &as7326_56x_cpld3_group; + break; + default: + break; + } + + if (group) { + ret = sysfs_create_group(&client->dev.kobj, group); + if (ret) { + goto exit_free; + } + } + + as7326_56x_cpld_add_client(client); + return 0; + +exit_free: + kfree(data); +exit: + return ret; +} + +static int as7326_56x_cpld_remove(struct i2c_client *client) +{ + struct as7326_56x_cpld_data *data = i2c_get_clientdata(client); + const struct attribute_group *group = NULL; + + as7326_56x_cpld_remove_client(client); + + /* Remove sysfs hooks */ + switch (data->type) { + case as7326_56x_cpld1: + group = &as7326_56x_cpld1_group; + break; + case as7326_56x_cpld2: + group = &as7326_56x_cpld2_group; + break; + case as7326_56x_cpld3: + group = &as7326_56x_cpld3_group; + break; + default: + break; + } + + if (group) { + sysfs_remove_group(&client->dev.kobj, group); + } + + kfree(data); + + return 0; +} + +static int as7326_56x_cpld_read_internal(struct i2c_client *client, u8 reg) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, reg); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static int as7326_56x_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, reg, value); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +int as7326_56x_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as7326_56x_cpld_read_internal(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as7326_56x_cpld_read); + +int as7326_56x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = as7326_56x_cpld_write_internal(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as7326_56x_cpld_write); + +static struct i2c_driver as7326_56x_cpld_driver = { + .driver = { + .name = "as7326_56x_cpld", + .owner = THIS_MODULE, + }, + .probe = as7326_56x_cpld_probe, + .remove = as7326_56x_cpld_remove, + .id_table = as7326_56x_cpld_id, +}; + +static int __init as7326_56x_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&as7326_56x_cpld_driver); +} + +static void __exit as7326_56x_cpld_exit(void) +{ + i2c_del_driver(&as7326_56x_cpld_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("Accton I2C CPLD driver"); +MODULE_LICENSE("GPL"); + +module_init(as7326_56x_cpld_init); +module_exit(as7326_56x_cpld_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/ym2651y.c new file mode 120000 index 000000000000..f4d67640ccc3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/modules/ym2651y.c @@ -0,0 +1 @@ +../../common/modules/ym2651y.c \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/service/as7326-platform-monitor.service b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/service/as7326-platform-monitor.service new file mode 100755 index 000000000000..3af4405fb493 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/service/as7326-platform-monitor.service @@ -0,0 +1,17 @@ +[Unit] +Description=Accton AS7326-56X Platform Monitoring service +Before=pmon.service +After=sysinit.target +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/local/bin/accton_as7326_util.py install +ExecStart=/usr/local/bin/accton_as7326_monitor.py +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/setup.py b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/setup.py new file mode 100755 index 000000000000..77114c71285b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/setup.py @@ -0,0 +1,16 @@ +#!/usr/bin/env pytho + +import os +import sys +from setuptools import setup +os.listdir + +setup( + name='as7326_56x', + version='1.0', + description='Module to initialize Accton AS7326-56X platforms', + + packages=['as7326_56x'], + package_dir={'as7326_56x': 'as7326-56x/classes'}, +) + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/README b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/README new file mode 100755 index 000000000000..ef0d03cf5e45 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/README @@ -0,0 +1,74 @@ +Copyright (C) 2016 Accton Networks, Inc. + +This program is free software: you can redistribute it and/or modify +It under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +Contents of this package: + module - Contains source code of as7326 kernel driver modules. + util - operational scripts. + +Sonic creates a docker container and run building process under it. +If user tries to built new drivers, please get into that docker and +dpkg-buildpackage for them. + +All Linux kernel code is licensed under the GPLv1. All other code is +licensed under the GPLv3. Please see the LICENSE file for copies of +both licenses. + +The code for integacting with Accton AS7326-56X has 2 parts, +kernel drivers and operational script. +The kernel drivers of peripherals are under module/ directory. +1. These drivers can be built to individual ko during dpkg-buildpackage. +2. A operational script, accton_as7326_util.py, for device initializatian. + Run "accton_as7326_util.py install" to install drivers. + +To initialize the system, run "accton_as7326_util.py install". +To clean up the drivers & devices, run "accton_as7326_util.py clean". +To dump information of sensors, run "accton_as7326_util.py show". +To dump SFP EEPROM, run "accton_as7326_util.py sff". +To set fan speed, run "accton_as7326_util.py set fan". +To enable/disable SFP emission, run "accton_as7326_util.py set sfp". +To set system LEDs' color, run "accton_as7326_util.py set led" +For more information, run "accton_as7326_util.py --help". + +==================================================================== +Besides applying accton_as7326_util.py to access peripherals, you can +access peripherals by sysfs nodes directly after the installation is run. + +System LED: + There are 5 system LEDs at the lower-left corner of front panel. + They are loc, diag, fan, ps1, and ps2. + The sysfs interface color mappings are as follows: + Brightness: + 0 => off + 1 => green + 2 => amber + 3 => red + 4 => blue + But not all colors are available for each LED. + +Fan Control: + There are 10 fans inside 6 fan modules. + All fans share 1 duty setting, ranged from 0~100. + +Thermal sensers: + 3 temperature sensors are controlled by the lm75 kernel modules. + +PSUs: + There 2 power supplies slot at the left/right side of the back. + Once if a PSU is not plugged, the status of it is shown failed. + +There are 48 SFP+ and 8 QSFP modules are equipped. +Before operating on PSU and QSFP+, please make sure it is well plugged. +Otherwise, operation is going to fail. + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/accton_as7326_monitor.py b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/accton_as7326_monitor.py new file mode 100755 index 000000000000..856f194c5e53 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/accton_as7326_monitor.py @@ -0,0 +1,208 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018: Jostar modify for as7716_32 +# 3/23/2018: Roy Lee modify for as7326_56x +# ------------------------------------------------------------------ + +try: + import os + import sys, getopt + import subprocess + import click + import imp + import logging + import logging.config + import types + import time # this is only being used as part of the example + import traceback + from tabulate import tabulate + from as7326_56x.fanutil import FanUtil + from as7326_56x.thermalutil import ThermalUtil +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +# Deafults +VERSION = '1.0' +FUNCTION_NAME = 'accton_as7326_monitor' + +global log_file +global log_level + +# (LM75_1+ LM75_2+ LM75_3) is LM75 at i2c addresses 0x48, 0x49, and 0x4A. +# TMP = (LM75_1+ LM75_2+ LM75_3)/3 +#1. If TMP < 35, All fans run with duty 31.25%. +#2. If TMP>=35 or the temperature of any one of fan is higher than 40, +# All fans run with duty 50% +#3. If TMP >= 40 or the temperature of any one of fan is higher than 45, +# All fans run with duty 62.5%. +#4. If TMP >= 45 or the temperature of any one of fan is higher than 50, +# All fans run with duty 100%. +#5. Any one of 6 fans is fault, set duty = 100%. +#6. Direction factor. If it is B2F direction, duty + 12%. + + # MISC: + # 1.Check single LM75 before applied average. + # 2.If no matched fan speed is found from the policy, + # use FAN_DUTY_CYCLE_MIN as default speed + # Get current temperature + # 4.Decision 3: Decide new fan speed depend on fan direction/current fan speed/temperature + + + + +# Make a class we can use to capture stdout and sterr in the log +class accton_as7326_monitor(object): + # static temp var + _ori_temp = 0 + _new_perc = 0 + _ori_perc = 0 + + def __init__(self, log_file, log_level): + """Needs a logger and a logger level.""" + # set up logging to file + logging.basicConfig( + filename=log_file, + filemode='w', + level=log_level, + format= '[%(asctime)s] {%(pathname)s:%(lineno)d} %(levelname)s - %(message)s', + datefmt='%H:%M:%S' + ) + + # set up logging to console + if log_level == logging.DEBUG: + console = logging.StreamHandler() + console.setLevel(log_level) + formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') + console.setFormatter(formatter) + logging.getLogger('').addHandler(console) + + logging.debug('SET. logfile:%s / loglevel:%d', log_file, log_level) + + def manage_fans(self): + max_duty = 100 + fan_policy_f2b = { + 0: [32, 0, 105000], + 1: [50, 105000, 120000], + 2: [63, 120000, 135000], + 3: [max_duty, 135000, sys.maxsize], + } + fan_policy_b2f = { + 0: [44, 0, 105000], + 1: [63, 105000, 120000], + 2: [75, 120000, 135000], + 3: [max_duty, 135000, sys.maxsize], + } + fan_policy_single = { + 0: 40000, + 1: 45000, + 2: 50000, + } + + thermal = ThermalUtil() + fan = FanUtil() + for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): + fan_status = fan.get_fan_status(x) + if fan_status is None: + logging.debug('INFO. SET new_perc to %d (FAN stauts is None. fan_num:%d)', max_duty, x) + return False + if fan_status is False: + logging.debug('INFO. SET new_perc to %d (FAN fault. fan_num:%d)', max_duty, x) + fan.set_fan_duty_cycle(max_duty) + return True + #logging.debug('INFO. fan_status is True (fan_num:%d)', x) + + fan_dir=fan.get_fan_dir(1) + if fan_dir == 1: + fan_policy = fan_policy_f2b + else: + fan_policy = fan_policy_b2f + + #Decide fan duty by if any of sensors > fan_policy_single. + new_duty_cycle = fan_policy[0][0] + for x in range(thermal.get_idx_thermal_start(), thermal.get_num_thermals()+1): + single_thm = thermal._get_thermal_node_val(x) + for y in range(0, len(fan_policy_single)): + if single_thm > fan_policy_single[y]: + if fan_policy[y+1][0] > new_duty_cycle: + new_duty_cycle = fan_policy[y+1][0] + logging.debug('INFO. Single thermal sensor %d with temp %d > %d , new_duty_cycle=%d', + x, single_thm, fan_policy_single[y], new_duty_cycle) + single_result = new_duty_cycle + + + #Find if current duty matched any of define duty. + #If not, set it to highest one. + cur_duty_cycle = fan.get_fan_duty_cycle() + for x in range(0, len(fan_policy)): + if cur_duty_cycle == fan_policy[x][0]: + break + if x == len(fan_policy) : + fan.set_fan_duty_cycle(fan_policy[0][0]) + cur_duty_cycle = max_duty + + #Decide fan duty by if sum of sensors falls into any of fan_policy{} + get_temp = thermal.get_thermal_temp() + new_duty_cycle = cur_duty_cycle + for x in range(0, len(fan_policy)): + y = len(fan_policy) - x -1 #checked from highest + if get_temp > fan_policy[y][1] and get_temp < fan_policy[y][2] : + new_duty_cycle= fan_policy[y][0] + logging.debug('INFO. Sum of temp %d > %d , new_duty_cycle=%d', get_temp, fan_policy[y][1], new_duty_cycle) + + sum_result = new_duty_cycle + if (sum_result>single_result): + new_duty_cycle = sum_result; + else: + new_duty_cycle = single_result + + logging.debug('INFO. Final duty_cycle=%d', new_duty_cycle) + if(new_duty_cycle != cur_duty_cycle): + fan.set_fan_duty_cycle(new_duty_cycle) + return True + +def main(argv): + log_file = '%s.log' % FUNCTION_NAME + log_level = logging.INFO + if len(sys.argv) != 1: + try: + opts, args = getopt.getopt(argv,'hdl:',['lfile=']) + except getopt.GetoptError: + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + for opt, arg in opts: + if opt == '-h': + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + elif opt in ('-d', '--debug'): + log_level = logging.DEBUG + elif opt in ('-l', '--lfile'): + log_file = arg + + monitor = accton_as7326_monitor(log_file, log_level) + + # Loop forever, doing something useful hopefully: + while True: + monitor.manage_fans() + time.sleep(10) + +if __name__ == '__main__': + main(sys.argv[1:]) diff --git a/platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/accton_as7326_util.py b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/accton_as7326_util.py new file mode 100755 index 000000000000..900bfa805a21 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7326-56x/utils/accton_as7326_util.py @@ -0,0 +1,577 @@ +#!/usr/bin/env python +# +# Copyright (C) 2016 Accton Networks, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# +# +# Description: +# Due to adoption of optoe drivers, sideband signals of SFPs are moved +# into cpld drivers. Add a new dict, cpld_of_module, for mapping this +# attributes to corresponding cpld nodes. +# + + + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes + show : show all systen status + sff : dump SFP eeprom + set : change board setting with fan|led|sfp +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + + + + +PROJECT_NAME = 'as7326_56x' +version = '0.1.0' +verbose = False +DEBUG = False +args = [] +ALL_DEVICE = {} +DEVICE_NO = {'led':5, 'fan':6,'thermal':4, 'psu':2, 'sfp':58} +FORCE = 0 +#logging.basicConfig(filename= PROJECT_NAME+'.log', filemode='w',level=logging.DEBUG) +#logging.basicConfig(level=logging.INFO) + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + do_install() + elif arg == 'clean': + do_uninstall() + elif arg == 'show': + device_traversal() + elif arg == 'sff': + if len(args)!=2: + show_eeprom_help() + elif int(args[1]) ==0 or int(args[1]) > DEVICE_NO['sfp']: + show_eeprom_help() + else: + show_eeprom(args[1]) + return + elif arg == 'set': + if len(args)<3: + show_set_help() + else: + set_device(args[1:]) + return + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_set_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print cmd +" [led|sfp|fan]" + print " use \""+ cmd + " led 0-4 \" to set led color" + print " use \""+ cmd + " fan 0-100\" to set fan duty percetage" + print " use \""+ cmd + " sfp 1-56 {0|1}\" to set sfp# tx_disable" + sys.exit(0) + +def show_eeprom_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print " use \""+ cmd + " 1-56 \" to dump sfp# eeprom" + sys.exit(0) + +def my_log(txt): + if DEBUG == True: + print "[ROY]"+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status, output = commands.getstatusoutput(cmd) + my_log (cmd +"with result:" + str(status)) + my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +def driver_check(): + ret, lsmod = log_os_system("lsmod| grep accton", 0) + logging.info('mods:'+lsmod) + if len(lsmod) ==0: + return False + return True + + + +kos = [ +'modprobe i2c_dev', +'modprobe i2c_mux_pca954x force_deselect_on_exit=1', +'modprobe accton_i2c_cpld' , +'modprobe ym2651y' , +'modprobe accton_as7326_56x_fan' , +'modprobe optoe' , +'modprobe accton_as7326_56x_leds' , +'modprobe accton_as7326_56x_psu' ] + +def driver_install(): + global FORCE + status, output = log_os_system("depmod", 1) + for i in range(0,len(kos)): + status, output = log_os_system(kos[i], 1) + if status: + if FORCE == 0: + return status + return 0 + +def driver_uninstall(): + global FORCE + for i in range(0,len(kos)): + rm = kos[-(i+1)].replace("modprobe", "modprobe -rq") + rm = rm.replace("insmod", "rmmod") + lst = rm.split(" ") + if len(lst) > 3: + del(lst[3]) + rm = " ".join(lst) + status, output = log_os_system(rm, 1) + if status: + if FORCE == 0: + return status + return 0 + +led_prefix ='/sys/class/leds/accton_'+PROJECT_NAME+'_led::' +hwmon_types = {'led': ['diag','fan','loc','psu1','psu2']} +hwmon_nodes = {'led': ['brightness'] } +hwmon_prefix ={'led': led_prefix} + +i2c_prefix = '/sys/bus/i2c/devices/' +i2c_bus = {'fan': ['11-0066'] , + 'thermal': ['15-0048','15-0049', '15-004a', '15-004b'] , + 'psu': ['17-0051','13-0053'], + 'sfp': ['-0050']} +i2c_nodes = {'fan': ['present', 'front_speed_rpm', 'rear_speed_rpm'] , + 'thermal': ['hwmon/hwmon*/temp1_input'] , + 'psu': ['psu_present ', 'psu_power_good'] , + 'sfp': ['module_present_', 'module_tx_disable_']} + +sfp_map = [ + 42,41,44,43,47,45,46,50, + 48,49,51,52,53,56,55,54, + 58,57,59,60,61,63,62,64, + 66,68,65,67,69,71,72,70, + 74,73,76,75,77,79,78,80, + 81,82,84,85,83,87,88,86, #port 41~48 + 25,26,27,28,29,30,31,32, #port 49~56 QSFP + 22,23] #port 57~58 SFP+ from CPU NIF. +qsfp_start = 48 +qsfp_end = 56 + +#For sideband signals of SFP/QSFP modules. +cpld_of_module = {'12-0062': list(range(0,30)), + '18-0060': list(range(30,58)) } + + +mknod =[ +'echo pca9548 0x77 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-1/new_device' , +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-1/new_device' , +'echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-24/new_device' , +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-2/new_device' , +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-33/new_device', +'echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-34/new_device', +'echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-35/new_device', +'echo pca9548 0x74 > /sys/bus/i2c/devices/i2c-36/new_device', +'echo pca9548 0x75 > /sys/bus/i2c/devices/i2c-37/new_device', +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-38/new_device', +'echo 24c04 0x56 > /sys/bus/i2c/devices/i2c-0/new_device', + +'echo as7326_56x_fan 0x66 > /sys/bus/i2c/devices/i2c-11/new_device ', +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-15/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-15/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-15/new_device', +'echo lm75 0x4b > /sys/bus/i2c/devices/i2c-15/new_device', +'echo as7326_56x_psu1 0x51 > /sys/bus/i2c/devices/i2c-17/new_device', +'echo ym2651 0x59 > /sys/bus/i2c/devices/i2c-17/new_device', +'echo as7326_56x_psu2 0x53 > /sys/bus/i2c/devices/i2c-13/new_device', +'echo ym2651 0x5b > /sys/bus/i2c/devices/i2c-13/new_device', +'echo as7326_56x_cpld1 0x60 > /sys/bus/i2c/devices/i2c-18/new_device', +'echo as7326_56x_cpld2 0x62 > /sys/bus/i2c/devices/i2c-12/new_device', +'echo as7326_56x_cpld3 0x64 > /sys/bus/i2c/devices/i2c-19/new_device'] + +mknod2 =[ +] + + + +def i2c_order_check(): + # This project has only 1 i2c bus. + return 0 + +def device_install(): + global FORCE + + order = i2c_order_check() + + # if 0x70 is not exist @i2c-1, use reversed bus order + if order: + for i in range(0,len(mknod2)): + #for pca954x need times to built new i2c buses + if mknod2[i].find('pca954') != -1: + time.sleep(1) + + status, output = log_os_system(mknod2[i], 1) + if status: + print output + if FORCE == 0: + return status + else: + for i in range(0,len(mknod)): + #for pca954x need times to built new i2c buses + if mknod[i].find('pca954') != -1: + time.sleep(1) + + status, output = log_os_system(mknod[i], 1) + if status: + print output + if FORCE == 0: + return status + for i in range(0,len(sfp_map)): + if i < qsfp_start or i >= qsfp_end: + status, output =log_os_system("echo optoe2 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + else: + status, output =log_os_system("echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + return + +def device_uninstall(): + global FORCE + + status, output =log_os_system("ls /sys/bus/i2c/devices/1-0076", 0) + if status==0: + I2C_ORDER=1 + else: + I2C_ORDER=0 + + for i in range(0,len(sfp_map)): + target = "/sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/delete_device" + status, output =log_os_system("echo 0x50 > "+ target, 1) + if status: + print output + if FORCE == 0: + return status + + if I2C_ORDER==0: + nodelist = mknod + else: + nodelist = mknod2 + + for i in range(len(nodelist)): + target = nodelist[-(i+1)] + temp = target.split() + del temp[1] + temp[-1] = temp[-1].replace('new_device', 'delete_device') + status, output = log_os_system(" ".join(temp), 1) + if status: + print output + if FORCE == 0: + return status + + return + +def system_ready(): + if driver_check() == False: + return False + if not device_exist(): + return False + return True + +def do_install(): + print "Checking system...." + if driver_check() == False: + print "No driver, installing...." + status = driver_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" drivers detected...." + if not device_exist(): + print "No device, installing...." + status = device_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" devices detected...." + return + +def do_uninstall(): + print "Checking system...." + if not device_exist(): + print PROJECT_NAME.upper() +" has no device installed...." + else: + print "Removing device...." + status = device_uninstall() + if status: + if FORCE == 0: + return status + + if driver_check()== False : + print PROJECT_NAME.upper() +" has no driver installed...." + else: + print "Removing installed driver...." + status = driver_uninstall() + if status: + if FORCE == 0: + return status + + return + +def devices_info(): + global DEVICE_NO + global ALL_DEVICE + global i2c_bus, hwmon_types + for key in DEVICE_NO: + ALL_DEVICE[key]= {} + for i in range(0,DEVICE_NO[key]): + ALL_DEVICE[key][key+str(i+1)] = [] + + for key in i2c_bus: + buses = i2c_bus[key] + nodes = i2c_nodes[key] + for i in range(0,len(buses)): + for j in range(0,len(nodes)): + if 'fan' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ buses[i]+"/fan"+str(k+1)+"_"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + elif 'sfp' == key: + for k in range(0,DEVICE_NO[key]): + for lk in cpld_of_module: + if k in cpld_of_module[lk]: + cpld_str = lk + node = key+str(k+1) + path = i2c_prefix+ lk + "/"+ nodes[j] + str(k+1) + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + else: + node = key+str(i+1) + path = i2c_prefix+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + + for key in hwmon_types: + itypes = hwmon_types[key] + nodes = hwmon_nodes[key] + for i in range(0,len(itypes)): + for j in range(0,len(nodes)): + node = key+"_"+itypes[i] + path = hwmon_prefix[key]+ itypes[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][ key+str(i+1)].append(path) + + #show dict all in the order + if DEBUG == True: + for i in sorted(ALL_DEVICE.keys()): + print(i+": ") + for j in sorted(ALL_DEVICE[i].keys()): + print(" "+j) + for k in (ALL_DEVICE[i][j]): + print(" "+" "+k) + return + +def show_eeprom(index): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + node = ALL_DEVICE['sfp'] ['sfp'+str(index)][0] + node = node.replace(node.split("/")[-1], 'eeprom') + # check if got hexdump command in current environment + ret, log = log_os_system("which hexdump", 0) + ret, log2 = log_os_system("which busybox hexdump", 0) + if len(log): + hex_cmd = 'hexdump' + elif len(log2): + hex_cmd = ' busybox hexdump' + else: + log = 'Failed : no hexdump cmd!!' + logging.info(log) + print log + return 1 + + print node + ":" + ret, log = log_os_system("cat "+node+"| "+hex_cmd+" -C", 1) + if ret==0: + print log + else: + print "**********device no found**********" + return + +def set_device(args): + global DEVICE_NO + global ALL_DEVICE + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + + if args[0]=='led': + if int(args[1])>4: + show_set_help() + return + #print ALL_DEVICE['led'] + for i in range(0,len(ALL_DEVICE['led'])): + for k in (ALL_DEVICE['led']['led'+str(i+1)]): + ret, log = log_os_system("echo "+args[1]+" >"+k, 1) + if ret: + return ret + elif args[0]=='fan': + if int(args[1])>100: + show_set_help() + return + #print ALL_DEVICE['fan'] + #fan1~6 is all fine, all fan share same setting + node = ALL_DEVICE['fan'] ['fan1'][0] + node = node.replace(node.split("/")[-1], 'fan_duty_cycle_percentage') + ret, log = log_os_system("cat "+ node, 1) + if ret==0: + print ("Previous fan duty: " + log.strip() +"%") + ret, log = log_os_system("echo "+args[1]+" >"+node, 1) + if ret==0: + print ("Current fan duty: " + args[1] +"%") + return ret + elif args[0]=='sfp': + if int(args[1])> DEVICE_NO[args[0]] or int(args[1])==0: + show_set_help() + return + if len(args)<2: + show_set_help() + return + + if int(args[2])>1: + show_set_help() + return + + #print ALL_DEVICE[args[0]] + for i in range(0,len(ALL_DEVICE[args[0]])): + for j in ALL_DEVICE[args[0]][args[0]+str(args[1])]: + if j.find('tx_disable')!= -1: + ret, log = log_os_system("echo "+args[2]+" >"+ j, 1) + if ret: + return ret + return + +#get digits inside a string. +#Ex: 31 for "sfp31" +def get_value(input): + digit = re.findall('\d+', input) + return int(digit[0]) + +def device_traversal(): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + for i in sorted(ALL_DEVICE.keys()): + print("============================================") + print(i.upper()+": ") + print("============================================") + + for j in sorted(ALL_DEVICE[i].keys(), key=get_value): + print " "+j+":", + for k in (ALL_DEVICE[i][j]): + ret, log = log_os_system("cat "+k, 0) + func = k.split("/")[-1].strip() + func = re.sub(j+'_','',func,1) + func = re.sub(i.lower()+'_','',func,1) + if ret==0: + print func+"="+log+" ", + else: + print func+"="+"X"+" ", + print + print("----------------------------------------------------------------") + + print + return + +def device_exist(): + ret1, log = log_os_system("ls "+i2c_prefix+"*0070", 0) + ret2, log = log_os_system("ls "+i2c_prefix+"i2c-2", 0) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/classes/__init__.py b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/classes/__init__.py new file mode 100755 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/Makefile b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/Makefile new file mode 100644 index 000000000000..d9566355b849 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/Makefile @@ -0,0 +1,2 @@ +obj-m:=accton_as7712_32x_fan.o accton_as7712_32x_sfp.o leds-accton_as7712_32x.o \ + accton_as7712_32x_psu.o accton_i2c_cpld.o ym2651y.o diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_fan.c b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_fan.c new file mode 100644 index 000000000000..3eae51cbcea7 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_fan.c @@ -0,0 +1,776 @@ +/* + * A hwmon driver for the Accton as7712 32x fan + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "as7712_32x_fan" + +#define NUM_THERMAL_SENSORS (3) /* Get sum of this number of sensors.*/ +#define THERMAL_SENSORS_DRIVER "lm75" +#define THERMAL_SENSORS_ADDRS {0x48, 0x49, 0x4a} + +#define IN +#define OUT + +static struct as7712_32x_fan_data *as7712_32x_fan_update_device(struct device *dev); +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_enable(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, char *buf); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +/* fan related data, the index should match sysfs_fan_attributes + */ +static const u8 fan_reg[] = { + 0x0F, /* fan 1-6 present status */ + 0x11, /* fan PWM(for all fan) */ + 0x12, /* front fan 1 speed(rpm) */ + 0x13, /* front fan 2 speed(rpm) */ + 0x14, /* front fan 3 speed(rpm) */ + 0x15, /* front fan 4 speed(rpm) */ + 0x16, /* front fan 5 speed(rpm) */ + 0x17, /* front fan 6 speed(rpm) */ + 0x22, /* rear fan 1 speed(rpm) */ + 0x23, /* rear fan 2 speed(rpm) */ + 0x24, /* rear fan 3 speed(rpm) */ + 0x25, /* rear fan 4 speed(rpm) */ + 0x26, /* rear fan 5 speed(rpm) */ + 0x27, /* rear fan 6 speed(rpm) */ +}; + +/* Each client has this additional data */ +struct as7712_32x_fan_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[ARRAY_SIZE(fan_reg)]; /* Register value */ + u8 enable; + int system_temp; /*In unit of mini-Celsius*/ + int sensors_found; +}; + +enum fan_id { + FAN1_ID, + FAN2_ID, + FAN3_ID, + FAN4_ID, + FAN5_ID, + FAN6_ID +}; + +enum sysfs_fan_attributes { + FAN_PRESENT_REG, + FAN_DUTY_CYCLE_PERCENTAGE, /* Only one CPLD register to control duty cycle for all fans */ + FAN1_FRONT_SPEED_RPM, + FAN2_FRONT_SPEED_RPM, + FAN3_FRONT_SPEED_RPM, + FAN4_FRONT_SPEED_RPM, + FAN5_FRONT_SPEED_RPM, + FAN6_FRONT_SPEED_RPM, + FAN1_REAR_SPEED_RPM, + FAN2_REAR_SPEED_RPM, + FAN3_REAR_SPEED_RPM, + FAN4_REAR_SPEED_RPM, + FAN5_REAR_SPEED_RPM, + FAN6_REAR_SPEED_RPM, + FAN1_PRESENT, + FAN2_PRESENT, + FAN3_PRESENT, + FAN4_PRESENT, + FAN5_PRESENT, + FAN6_PRESENT, + FAN1_FAULT, + FAN2_FAULT, + FAN3_FAULT, + FAN4_FAULT, + FAN5_FAULT, + FAN6_FAULT +}; + +/* Define attributes + */ +#define DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT);\ + static SENSOR_DEVICE_ATTR(fan##index2##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT) +#define DECLARE_FAN_FAULT_ATTR(index, index2) &sensor_dev_attr_fan##index##_fault.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_fault.dev_attr.attr + +#define DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_direction, S_IRUGO, fan_show_value, NULL, FAN##index##_DIRECTION) +#define DECLARE_FAN_DIRECTION_ATTR(index) &sensor_dev_attr_fan##index##_direction.dev_attr.attr + +#define DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index##_enable, S_IWUSR | S_IRUGO, get_enable, set_enable, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_DUTY_CYCLE_ATTR(index) &sensor_dev_attr_fan_duty_cycle_percentage.dev_attr.attr, \ + &sensor_dev_attr_pwm##index.dev_attr.attr, \ + &sensor_dev_attr_pwm##index##_enable.dev_attr.attr + +#define DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR() \ + static SENSOR_DEVICE_ATTR(sys_temp, S_IRUGO, get_sys_temp, NULL, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_SYSTEM_TEMP_ATTR() &sensor_dev_attr_sys_temp.dev_attr.attr + + +#define DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_present, S_IRUGO, fan_show_value, NULL, FAN##index##_PRESENT) +#define DECLARE_FAN_PRESENT_ATTR(index) &sensor_dev_attr_fan##index##_present.dev_attr.attr + +#define DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_front_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_rear_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index2##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM) +#define DECLARE_FAN_SPEED_RPM_ATTR(index, index2) &sensor_dev_attr_fan##index##_front_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_rear_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_input.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_input.dev_attr.attr + +/* 6 fan fault attributes in this platform */ +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(6,16); +/* 6 fan speed(rpm) attributes in this platform */ +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(6,16); +/* 6 fan present attributes in this platform */ +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(1); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(2); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(3); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(4); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(5); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(6); +/* 1 fan duty cycle attribute in this platform */ +DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(1); +/* System temperature for fancontrol */ +DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR(); + +static struct attribute *as7712_32x_fan_attributes[] = { + /* fan related attributes */ + DECLARE_FAN_FAULT_ATTR(1,11), + DECLARE_FAN_FAULT_ATTR(2,12), + DECLARE_FAN_FAULT_ATTR(3,13), + DECLARE_FAN_FAULT_ATTR(4,14), + DECLARE_FAN_FAULT_ATTR(5,15), + DECLARE_FAN_FAULT_ATTR(6,16), + DECLARE_FAN_SPEED_RPM_ATTR(1,11), + DECLARE_FAN_SPEED_RPM_ATTR(2,12), + DECLARE_FAN_SPEED_RPM_ATTR(3,13), + DECLARE_FAN_SPEED_RPM_ATTR(4,14), + DECLARE_FAN_SPEED_RPM_ATTR(5,15), + DECLARE_FAN_SPEED_RPM_ATTR(6,16), + DECLARE_FAN_PRESENT_ATTR(1), + DECLARE_FAN_PRESENT_ATTR(2), + DECLARE_FAN_PRESENT_ATTR(3), + DECLARE_FAN_PRESENT_ATTR(4), + DECLARE_FAN_PRESENT_ATTR(5), + DECLARE_FAN_PRESENT_ATTR(6), + DECLARE_FAN_DUTY_CYCLE_ATTR(1), + DECLARE_FAN_SYSTEM_TEMP_ATTR(), + NULL +}; + +#define FAN_DUTY_CYCLE_REG_MASK 0xF +#define FAN_MAX_DUTY_CYCLE 100 +#define FAN_REG_VAL_TO_SPEED_RPM_STEP 100 + +static int as7712_32x_fan_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int as7712_32x_fan_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* fan utility functions + */ +static u32 reg_val_to_duty_cycle(u8 reg_val) +{ + reg_val &= FAN_DUTY_CYCLE_REG_MASK; + return ((u32)(reg_val+1) * 625 + 75)/ 100; +} + +static u8 duty_cycle_to_reg_val(u8 duty_cycle) +{ + return ((u32)duty_cycle * 100 / 625) - 1; +} + +static u32 reg_val_to_speed_rpm(u8 reg_val) +{ + return (u32)reg_val * FAN_REG_VAL_TO_SPEED_RPM_STEP; +} + +static u8 reg_val_to_is_present(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 0 : 1; +} + +static u8 is_fan_fault(struct as7712_32x_fan_data *data, enum fan_id id) +{ + u8 ret = 1; + int front_fan_index = FAN1_FRONT_SPEED_RPM + id; + int rear_fan_index = FAN1_REAR_SPEED_RPM + id; + + /* Check if the speed of front or rear fan is ZERO, + */ + if (reg_val_to_speed_rpm(data->reg_val[front_fan_index]) && + reg_val_to_speed_rpm(data->reg_val[rear_fan_index])) { + ret = 0; + } + + return ret; +} + +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct as7712_32x_fan_data *data = as7712_32x_fan_update_device(dev); + int error, value; + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > 1) + return -EINVAL; + + data->enable = value; + if (value == 0) + { + return set_duty_cycle(dev, da, buf, FAN_MAX_DUTY_CYCLE); + } + return count; +} + + +static ssize_t get_enable(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7712_32x_fan_data *data = as7712_32x_fan_update_device(dev); + + return sprintf(buf, "%u\n", data->enable); +} +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int error, value; + struct i2c_client *client = to_i2c_client(dev); + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0) + return -EINVAL; + + value = (value > FAN_MAX_DUTY_CYCLE)? FAN_MAX_DUTY_CYCLE : value; + + as7712_32x_fan_write_value(client, 0x33, 0); /* Disable fan speed watch dog */ + as7712_32x_fan_write_value(client, fan_reg[FAN_DUTY_CYCLE_PERCENTAGE], duty_cycle_to_reg_val(value)); + return count; +} + +/* Due to this struct is declared at lm75.c, it cannot be include + * under Sonic environment. I duplicate it from lm75.c. + */ +struct lm75_data { + struct i2c_client *client; + struct device *hwmon_dev; + struct thermal_zone_device *tz; + struct mutex update_lock; + u8 orig_conf; + u8 resolution; /* In bits, between 9 and 12 */ + u8 resolution_limits; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + unsigned long sample_time; /* In jiffies */ + s16 temp[3]; /* Register values, + 0 = input + 1 = max + 2 = hyst */ +}; + +/*Copied from lm75.c*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + +/*Get hwmon_dev from i2c_client, set hwmon_dev = NULL is failed.*/ +static struct device * get_hwmon_dev( + struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if(data) + { + if( data->valid == 1 && data->hwmon_dev) + { + return data->hwmon_dev; + } + + } + return NULL; +} + +/* To find hwmon index by opening hwmon under that i2c address. + */ +static int find_hwmon_index_by_FileOpen( + int bus_nr, + unsigned short addr, + OUT int *index) +{ +#define MAX_HWMON_DEVICE (10) /* Find hwmon device in 0~10*/ + struct file *sfd; + char client_name[96]; + int i=0; + + do { + snprintf(client_name, sizeof(client_name), + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + + sfd = filp_open(client_name, O_RDONLY, 0); + i++; + } while( IS_ERR(sfd) && i < MAX_HWMON_DEVICE); + + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", client_name, __LINE__); + return -ENOENT; + } + filp_close(sfd, 0); + *index = i - 1; + return 0; + +#undef MAX_HWMON_DEVICE +} + +static int get_temp_file_path( + int bus_nr, unsigned short addr, + struct device *hwmon_dev + ,char *path, int max_len) +{ + + if(hwmon_dev && strlen(dev_name(hwmon_dev))) + { + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/%s/temp1_input", + bus_nr, addr, dev_name(hwmon_dev)); + } + else + { + int i=0; + if(find_hwmon_index_by_FileOpen( bus_nr, addr, &i)) + { + return -EIO; + } + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + } + return 0; +} + +/*File read the dev file at user space.*/ +static int read_devfile_temp1_input( + struct device *dev, + int bus_nr, + unsigned short addr, + struct device *hwmon_dev, + int *miniCelsius) +{ + struct file *sfd; + char buffer[96]; + char devfile[96]; + int rc, status; + int rdlen, value; + mm_segment_t old_fs; + + rc = 0; + get_temp_file_path(bus_nr, addr, hwmon_dev, devfile, sizeof(devfile)); + sfd = filp_open(devfile, O_RDONLY, 0); + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", devfile, __LINE__); + return -ENOENT; + } + dev_dbg(dev, "Found device:%s\n",devfile); + + if(!(sfd->f_op) || !(sfd->f_op->read) ) { + pr_err("file %s cann't readable ?\n",devfile); + return -ENOENT; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + rdlen = sfd->f_op->read(sfd, buffer, sizeof(buffer), &sfd->f_pos); + if (rdlen == 0) { + pr_err( "File(%s) empty!\n", devfile); + rc = -EIO; + goto exit; + } + status = sscanf(buffer, "%d", &value); + if (status != 1) { + rc = -EIO; + goto exit; + } + *miniCelsius = value; + dev_dbg(dev,"found sensors: %d @i2c %d-%04x\n", value, bus_nr, addr); + +exit: + set_fs(old_fs); + filp_close(sfd, 0); + return rc; +} + +static u8 is_lm75_data_due(struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if (time_after(jiffies, data->last_updated + data->sample_time)) + { + return 1; + } + return 0; +} +static int get_lm75_temp(struct i2c_client *client, int *miniCelsius) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + *miniCelsius = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + +static bool lm75_addr_mached(unsigned short addr) +{ + int i; + unsigned short addrs[] = THERMAL_SENSORS_ADDRS; + + for (i = 0; i < ARRAY_SIZE(addrs); i++) + { + if( addr == addrs[i]) + return 1; + } + return 0; +} + +static int _find_lm75_device(struct device *dev, void *data) +{ + struct device_driver *driver; + struct as7712_32x_fan_data *prv = data; + char *driver_name = THERMAL_SENSORS_DRIVER; + + driver = dev->driver; + if (driver && driver->name && + strcmp(driver->name, driver_name) == 0) + { + struct i2c_client *client; + client = to_i2c_client(dev); + if (client) + { + /*cannot use "struct i2c_adapter *adap = to_i2c_adapter(dev);"*/ + struct i2c_adapter *adap = client->adapter; + int miniCelsius = 0; + + if (! lm75_addr_mached(client->addr)) + { + return 0; + } + + if (!adap) { + return -ENXIO; + } + + /* If the data is not updated, read them from devfile + to drive them updateing data from chip.*/ + if (is_lm75_data_due(client)) + { + struct device *hwmon_dev; + + hwmon_dev = get_hwmon_dev(client); + if(0 == read_devfile_temp1_input(dev, adap->nr, + client->addr, hwmon_dev, &miniCelsius)) + { + prv->system_temp += miniCelsius; + prv->sensors_found++; + } + + } + else + { + get_lm75_temp(client, &miniCelsius); + prv->system_temp += miniCelsius; + prv->sensors_found++; + + } + } + } + return 0; +} + +/*Find all lm75 devices and return sum of temperatures.*/ +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + ssize_t ret = 0; + struct as7712_32x_fan_data *data = as7712_32x_fan_update_device(dev); + + data->system_temp=0; + data->sensors_found=0; + i2c_for_each_dev(data, _find_lm75_device); + if (NUM_THERMAL_SENSORS != data->sensors_found) + { + dev_dbg(dev,"only %d of %d temps are found\n", + data->sensors_found, NUM_THERMAL_SENSORS); + data->system_temp = INT_MAX; + } + ret = sprintf(buf, "%d\n",data->system_temp); + return ret; +} + +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7712_32x_fan_data *data = as7712_32x_fan_update_device(dev); + ssize_t ret = 0; + + if (data->valid) { + switch (attr->index) { + case FAN_DUTY_CYCLE_PERCENTAGE: + { + u32 duty_cycle = reg_val_to_duty_cycle(data->reg_val[FAN_DUTY_CYCLE_PERCENTAGE]); + ret = sprintf(buf, "%u\n", duty_cycle); + break; + } + case FAN1_FRONT_SPEED_RPM: + case FAN2_FRONT_SPEED_RPM: + case FAN3_FRONT_SPEED_RPM: + case FAN4_FRONT_SPEED_RPM: + case FAN5_FRONT_SPEED_RPM: + case FAN6_FRONT_SPEED_RPM: + case FAN1_REAR_SPEED_RPM: + case FAN2_REAR_SPEED_RPM: + case FAN3_REAR_SPEED_RPM: + case FAN4_REAR_SPEED_RPM: + case FAN5_REAR_SPEED_RPM: + case FAN6_REAR_SPEED_RPM: + ret = sprintf(buf, "%u\n", reg_val_to_speed_rpm(data->reg_val[attr->index])); + break; + case FAN1_PRESENT: + case FAN2_PRESENT: + case FAN3_PRESENT: + case FAN4_PRESENT: + case FAN5_PRESENT: + case FAN6_PRESENT: + ret = sprintf(buf, "%d\n", + reg_val_to_is_present(data->reg_val[FAN_PRESENT_REG], + attr->index - FAN1_PRESENT)); + break; + case FAN1_FAULT: + case FAN2_FAULT: + case FAN3_FAULT: + case FAN4_FAULT: + case FAN5_FAULT: + case FAN6_FAULT: + ret = sprintf(buf, "%d\n", is_fan_fault(data, attr->index - FAN1_FAULT)); + break; + default: + break; + } + } + + return ret; +} + +static const struct attribute_group as7712_32x_fan_group = { + .attrs = as7712_32x_fan_attributes, +}; + +static struct as7712_32x_fan_data *as7712_32x_fan_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7712_32x_fan_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || + !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting as7712_32x_fan update\n"); + data->valid = 0; + + /* Update fan data + */ + for (i = 0; i < ARRAY_SIZE(data->reg_val); i++) { + int status = as7712_32x_fan_read_value(client, fan_reg[i]); + + if (status < 0) { + data->valid = 0; + mutex_unlock(&data->update_lock); + dev_dbg(&client->dev, "reg %d, err %d\n", fan_reg[i], status); + return data; + } + else { + data->reg_val[i] = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int as7712_32x_fan_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7712_32x_fan_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7712_32x_fan_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->enable = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7712_32x_fan_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: fan '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7712_32x_fan_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7712_32x_fan_remove(struct i2c_client *client) +{ + struct as7712_32x_fan_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7712_32x_fan_group); + + return 0; +} + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x66, I2C_CLIENT_END }; + +static const struct i2c_device_id as7712_32x_fan_id[] = { + { "as7712_32x_fan", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7712_32x_fan_id); + +static struct i2c_driver as7712_32x_fan_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = DRVNAME, + }, + .probe = as7712_32x_fan_probe, + .remove = as7712_32x_fan_remove, + .id_table = as7712_32x_fan_id, + .address_list = normal_i2c, +}; + +static int __init as7712_32x_fan_init(void) +{ + return i2c_add_driver(&as7712_32x_fan_driver); +} + +static void __exit as7712_32x_fan_exit(void) +{ + i2c_del_driver(&as7712_32x_fan_driver); +} + +module_init(as7712_32x_fan_init); +module_exit(as7712_32x_fan_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7712_32x_fan driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_psu.c b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_psu.c new file mode 100644 index 000000000000..233aef78e09f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_psu.c @@ -0,0 +1,288 @@ +/* + * An hwmon driver for accton as7712_32x Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, char *buf); +static int as7712_32x_psu_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x50, 0x53, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7712_32x_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ + char model_name[9]; /* Model name, read from eeprom */ +}; + +static struct as7712_32x_psu_data *as7712_32x_psu_update_device(struct device *dev); + +enum as7712_32x_psu_sysfs_attributes { + PSU_PRESENT, + PSU_MODEL_NAME, + PSU_POWER_GOOD +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_present, S_IRUGO, show_status, NULL, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_model_name, S_IRUGO, show_model_name,NULL, PSU_MODEL_NAME); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_status, NULL, PSU_POWER_GOOD); + +static struct attribute *as7712_32x_psu_attributes[] = { + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_model_name.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + NULL +}; + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7712_32x_psu_data *data = as7712_32x_psu_update_device(dev); + u8 status = 0; + + if (attr->index == PSU_PRESENT) { + status = !(data->status >> (1-data->index) & 0x1); + } + else { /* PSU_POWER_GOOD */ + status = (data->status >> (3-data->index) & 0x1); + } + + return sprintf(buf, "%d\n", status); +} + +static ssize_t show_model_name(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7712_32x_psu_data *data = as7712_32x_psu_update_device(dev); + + return sprintf(buf, "%s\n", data->model_name); +} + +static const struct attribute_group as7712_32x_psu_group = { + .attrs = as7712_32x_psu_attributes, +}; + +static int as7712_32x_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7712_32x_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7712_32x_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7712_32x_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7712_32x_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7712_32x_psu_remove(struct i2c_client *client) +{ + struct as7712_32x_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7712_32x_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as7712_32x_psu1, + as7712_32x_psu2 +}; + +static const struct i2c_device_id as7712_32x_psu_id[] = { + { "as7712_32x_psu1", as7712_32x_psu1 }, + { "as7712_32x_psu2", as7712_32x_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7712_32x_psu_id); + +static struct i2c_driver as7712_32x_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7712_32x_psu", + }, + .probe = as7712_32x_psu_probe, + .remove = as7712_32x_psu_remove, + .id_table = as7712_32x_psu_id, + .address_list = normal_i2c, +}; + +static int as7712_32x_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = 0; + int retry_count = 5; + + while (retry_count) { + retry_count--; + + result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) { + msleep(10); + continue; + } + + if (unlikely(result != data_len)) { + result = -EIO; + msleep(10); + continue; + } + + result = 0; + break; + } + + return result; +} + +static struct as7712_32x_psu_data *as7712_32x_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7712_32x_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status; + int power_good = 0; + + dev_dbg(&client->dev, "Starting as7712_32x update\n"); + + /* Read psu status */ + status = accton_i2c_cpld_read(0x60, 0x2); + + if (status < 0) { + dev_dbg(&client->dev, "cpld reg 0x60 err %d\n", status); + } + else { + data->status = status; + } + + /* Read model name */ + memset(data->model_name, 0, sizeof(data->model_name)); + power_good = (data->status >> (3-data->index) & 0x1); + + if (power_good) { + status = as7712_32x_psu_read_block(client, 0x20, data->model_name, + ARRAY_SIZE(data->model_name)-1); + + if (status < 0) { + data->model_name[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x)\n", client->addr); + } + else { + data->model_name[ARRAY_SIZE(data->model_name)-1] = '\0'; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init as7712_32x_psu_init(void) +{ + return i2c_add_driver(&as7712_32x_psu_driver); +} + +static void __exit as7712_32x_psu_exit(void) +{ + i2c_del_driver(&as7712_32x_psu_driver); +} + +module_init(as7712_32x_psu_init); +module_exit(as7712_32x_psu_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7712_32x_psu driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_sfp.c b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_sfp.c new file mode 100644 index 000000000000..4668f5a7f050 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_as7712_32x_sfp.c @@ -0,0 +1,1171 @@ +/* + * SFP driver for accton as7712_32x sfp + * + * Copyright (C) Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "as7712_32x_sfp" + +#define DEBUG_MODE 0 + +#if (DEBUG_MODE == 1) + #define DEBUG_PRINT(fmt, args...) \ + printk (KERN_INFO "%s:%s[%d]: " fmt "\r\n", __FILE__, __FUNCTION__, __LINE__, ##args) +#else + #define DEBUG_PRINT(fmt, args...) +#endif + +#define NUM_OF_SFP_PORT 32 +#define EEPROM_NAME "sfp_eeprom" +#define EEPROM_SIZE 256 /* 256 byte eeprom */ +#define BIT_INDEX(i) (1ULL << (i)) +#define USE_I2C_BLOCK_READ 1 +#define I2C_RW_RETRY_COUNT 3 +#define I2C_RW_RETRY_INTERVAL 100 /* ms */ + +#define SFP_EEPROM_A0_I2C_ADDR (0xA0 >> 1) +#define SFP_EEPROM_A2_I2C_ADDR (0xA2 >> 1) + +#define SFF8024_PHYSICAL_DEVICE_ID_ADDR 0x0 +#define SFF8024_DEVICE_ID_SFP 0x3 +#define SFF8024_DEVICE_ID_QSFP 0xC +#define SFF8024_DEVICE_ID_QSFP_PLUS 0xD +#define SFF8024_DEVICE_ID_QSFP28 0x11 + +#define SFF8472_DIAG_MON_TYPE_ADDR 92 +#define SFF8472_DIAG_MON_TYPE_DDM_MASK 0x40 +#define SFF8472_10G_ETH_COMPLIANCE_ADDR 0x3 +#define SFF8472_10G_BASE_MASK 0xF0 + +#define SFF8436_RX_LOS_ADDR 3 +#define SFF8436_TX_FAULT_ADDR 4 +#define SFF8436_TX_DISABLE_ADDR 86 + +static ssize_t sfp_eeprom_read(struct i2c_client *, u8, u8 *,int); +static ssize_t sfp_eeprom_write(struct i2c_client *, u8 , const char *,int); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { SFP_EEPROM_A0_I2C_ADDR, SFP_EEPROM_A2_I2C_ADDR, I2C_CLIENT_END }; + +#define CPLD_PORT_TO_FRONT_PORT(port) (port+1) + +enum port_numbers { +sfp1, sfp2, sfp3, sfp4, sfp5, sfp6, sfp7, sfp8, +sfp9, sfp10, sfp11, sfp12, sfp13, sfp14, sfp15, sfp16, +sfp17, sfp18, sfp19, sfp20, sfp21, sfp22, sfp23, sfp24, +sfp25, sfp26, sfp27, sfp28, sfp29, sfp30, sfp31, sfp32 +}; + +static const struct i2c_device_id sfp_device_id[] = { +{ "sfp1", sfp1 }, { "sfp2", sfp2 }, { "sfp3", sfp3 }, { "sfp4", sfp4 }, +{ "sfp5", sfp5 }, { "sfp6", sfp6 }, { "sfp7", sfp7 }, { "sfp8", sfp8 }, +{ "sfp9", sfp9 }, { "sfp10", sfp10 }, { "sfp11", sfp11 }, { "sfp12", sfp12 }, +{ "sfp13", sfp13 }, { "sfp14", sfp14 }, { "sfp15", sfp15 }, { "sfp16", sfp16 }, +{ "sfp17", sfp17 }, { "sfp18", sfp18 }, { "sfp19", sfp19 }, { "sfp20", sfp20 }, +{ "sfp21", sfp21 }, { "sfp22", sfp22 }, { "sfp23", sfp23 }, { "sfp24", sfp24 }, +{ "sfp25", sfp25 }, { "sfp26", sfp26 }, { "sfp27", sfp27 }, { "sfp28", sfp28 }, +{ "sfp29", sfp29 }, { "sfp30", sfp30 }, { "sfp31", sfp31 }, { "sfp32", sfp32 }, +{} +}; +MODULE_DEVICE_TABLE(i2c, sfp_device_id); + +/* + * list of valid port types + * note OOM_PORT_TYPE_NOT_PRESENT to indicate no + * module is present in this port + */ +typedef enum oom_driver_port_type_e { + OOM_DRIVER_PORT_TYPE_INVALID, + OOM_DRIVER_PORT_TYPE_NOT_PRESENT, + OOM_DRIVER_PORT_TYPE_SFP, + OOM_DRIVER_PORT_TYPE_SFP_PLUS, + OOM_DRIVER_PORT_TYPE_QSFP, + OOM_DRIVER_PORT_TYPE_QSFP_PLUS, + OOM_DRIVER_PORT_TYPE_QSFP28 +} oom_driver_port_type_t; + +enum driver_type_e { + DRIVER_TYPE_SFP_MSA, + DRIVER_TYPE_SFP_DDM, + DRIVER_TYPE_QSFP +}; + +/* Each client has this additional data + */ +struct eeprom_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + struct bin_attribute bin; /* eeprom data */ +}; + +struct sfp_msa_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u64 status[2]; /* index 0 => device id + 1 => 10G Ethernet Compliance Codes + to distinguish SFP or SFP+ + 2 => DIAGNOSTIC MONITORING TYPE */ + struct eeprom_data eeprom; +}; + +struct sfp_ddm_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u64 status[3]; /* bit0:port0, bit1:port1 and so on */ + /* index 0 => tx_fail + 1 => tx_disable + 2 => rx_loss */ + struct eeprom_data eeprom; +}; + +struct qsfp_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 status[3]; /* bit0:port0, bit1:port1 and so on */ + /* index 0 => tx_fail + 1 => tx_disable + 2 => rx_loss */ + + u8 device_id; + struct eeprom_data eeprom; +}; + +struct sfp_port_data { + struct mutex update_lock; + enum driver_type_e driver_type; + int port; /* CPLD port index */ + oom_driver_port_type_t port_type; + u64 present; /* present status, bit0:port0, bit1:port1 and so on */ + u64 port_reset; /* reset status, bit0:port0, bit1:port1 and so on */ + + struct sfp_msa_data *msa; + struct sfp_ddm_data *ddm; + struct qsfp_data *qsfp; + + struct i2c_client *client; +}; + +enum sfp_sysfs_attributes { + PRESENT, + PRESENT_ALL, + PORT_NUMBER, + PORT_TYPE, + DDM_IMPLEMENTED, + TX_FAULT, + TX_FAULT1, + TX_FAULT2, + TX_FAULT3, + TX_FAULT4, + TX_DISABLE, + TX_DISABLE1, + TX_DISABLE2, + TX_DISABLE3, + TX_DISABLE4, + TX_DISABLE_ALL, + RX_LOS, + RX_LOS1, + RX_LOS2, + RX_LOS3, + RX_LOS4, + RX_LOS_ALL, + PORT_RESET +}; + +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + return sprintf(buf, "%d\n", CPLD_PORT_TO_FRONT_PORT(data->port)); +} + +static struct sfp_port_data *sfp_update_present(struct i2c_client *client) +{ + struct sfp_port_data *data = i2c_get_clientdata(client); + int i = 0; + int status = -1; + u8 regs[] = {0x30, 0x31, 0x32, 0x33}; + + DEBUG_PRINT("Starting sfp present status update"); + mutex_lock(&data->update_lock); + + /* Read present status of port 1~32 */ + data->present = 0; + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = accton_i2c_cpld_read(0x60, regs[i]); + + if (status < 0) { + DEBUG_PRINT("cpld(0x60) reg(0x%x) err %d", regs[i], status); + goto exit; + } + + DEBUG_PRINT("Present status = 0x%llx", data->present); + data->present |= (u64)status << (i*8); + } + + DEBUG_PRINT("Present status = 0x%llx", data->present); +exit: + mutex_unlock(&data->update_lock); + return data; +} + +static struct sfp_port_data *sfp_update_tx_rx_status(struct device *dev) +{ + return NULL; +} + +static ssize_t sfp_set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + return 0; +} + +static int sfp_is_port_present(struct i2c_client *client, int port) +{ + struct sfp_port_data *data = sfp_update_present(client); + return (data->present & BIT_INDEX(data->port)) ? 0 : 1; +} + +static ssize_t show_present(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + + if (PRESENT_ALL == attr->index) { + + } + + /* PRESENT */ + return sprintf(buf, "%d\n", sfp_is_port_present(client, data->port)); +} + +static struct sfp_port_data *sfp_update_port_type(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + u8 buf = 0; + int status; + + mutex_lock(&data->update_lock); + + switch (data->driver_type) { + case DRIVER_TYPE_SFP_MSA: + { + status = sfp_eeprom_read(data->client, SFF8024_PHYSICAL_DEVICE_ID_ADDR, &buf, sizeof(buf)); + if (status < 0) { + data->port_type = OOM_DRIVER_PORT_TYPE_INVALID; + break; + } + + if (buf != SFF8024_DEVICE_ID_SFP) { + data->port_type = OOM_DRIVER_PORT_TYPE_INVALID; + break; + } + + status = sfp_eeprom_read(data->client, SFF8472_10G_ETH_COMPLIANCE_ADDR, &buf, sizeof(buf)); + if (status < 0) { + data->port_type = OOM_DRIVER_PORT_TYPE_INVALID; + break; + } + + DEBUG_PRINT("sfp port type (0x3) data = (0x%x)", buf); + data->port_type = buf & SFF8472_10G_BASE_MASK ? OOM_DRIVER_PORT_TYPE_SFP_PLUS : OOM_DRIVER_PORT_TYPE_SFP; + break; + } + case DRIVER_TYPE_QSFP: + { + status = sfp_eeprom_read(data->client, SFF8024_PHYSICAL_DEVICE_ID_ADDR, &buf, sizeof(buf)); + if (status < 0) { + data->port_type = OOM_DRIVER_PORT_TYPE_INVALID; + break; + } + + DEBUG_PRINT("qsfp port type (0x0) buf = (0x%x)", buf); + switch (buf) { + case SFF8024_DEVICE_ID_QSFP: + data->port_type = OOM_DRIVER_PORT_TYPE_QSFP; + break; + case SFF8024_DEVICE_ID_QSFP_PLUS: + data->port_type = OOM_DRIVER_PORT_TYPE_QSFP_PLUS; + break; + case SFF8024_DEVICE_ID_QSFP28: + data->port_type = OOM_DRIVER_PORT_TYPE_QSFP_PLUS; + break; + default: + data->port_type = OOM_DRIVER_PORT_TYPE_INVALID; + break; + } + + break; + } + default: + break; + } + + mutex_unlock(&data->update_lock); + return data; +} + +static ssize_t show_port_type(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + + if (!sfp_is_port_present(client, data->port)) { + return sprintf(buf, "%d\n", OOM_DRIVER_PORT_TYPE_NOT_PRESENT); + } + + sfp_update_port_type(dev); + return sprintf(buf, "%d\n", data->port_type); +} + + +static struct sfp_port_data *sfp_update_port_reset(struct i2c_client *client) +{ + struct sfp_port_data *data = i2c_get_clientdata(client); + int i = 0; + int status = -1; + u8 regs[] = {0x4, 0x5, 0x6, 0x7}; + + mutex_lock(&data->update_lock); + + /* Read reset status of port 1~32 */ + data->port_reset = 0; + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = accton_i2c_cpld_read(0x60, regs[i]); + + if (status < 0) { + DEBUG_PRINT("cpld(0x60) reg(0x%x) err %d", regs[i], status); + goto exit; + } + + DEBUG_PRINT("reset status = 0x%x", status); + data->port_reset |= (u64)status << (i*8); + } + + DEBUG_PRINT("reset status = 0x%llx", data->port_reset); +exit: + mutex_unlock(&data->update_lock); + return data; +} + +static ssize_t show_port_reset(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + int is_reset = 0; + + if (!sfp_is_port_present(client, data->port)) { + return sprintf(buf, "%d\n", OOM_DRIVER_PORT_TYPE_NOT_PRESENT); + } + + sfp_update_port_reset(client); + is_reset = (data->port_reset & BIT_INDEX(data->port))? 0 : 1; + + return sprintf(buf, "%d\n", is_reset); +} + +static ssize_t sfp_set_port_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + u8 cpld_reg = 0, cpld_val = 0, cpld_bit = 0; + long is_reset; + int error; + + error = kstrtol(buf, 10, &is_reset); + if (error) { + return error; + } + + mutex_lock(&data->update_lock); + + cpld_reg = 0x4 + data->port / 8; + cpld_bit = 1 << (data->port % 8); + + cpld_val = accton_i2c_cpld_read(0x60, cpld_reg); + DEBUG_PRINT("current cpld reg = 0x%x value = 0x%x", cpld_reg, cpld_val); + + /* Update reset status. CPLD defined 0 is reset state, 1 is normal state. + * is_reset: 0 is not reset. 1 is reset. + */ + if (is_reset == 0) { + data->port_reset |= BIT_INDEX(data->port); + cpld_val |= cpld_bit; + } + else { + data->port_reset &= ~BIT_INDEX(data->port); + cpld_val &= ~cpld_bit; + } + + accton_i2c_cpld_write(0x60, cpld_reg, cpld_val); + DEBUG_PRINT("write cpld reg = 0x%x value = 0x%x cpld_bit = 0x%x", cpld_reg, cpld_val,cpld_bit); + + mutex_unlock(&data->update_lock); + + return count; +} + +static struct sfp_port_data *qsfp_update_tx_rx_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + int i, status = -1; + u8 buf = 0; + u8 reg[] = {SFF8436_TX_FAULT_ADDR, SFF8436_TX_DISABLE_ADDR, SFF8436_RX_LOS_ADDR}; + + if (time_before(jiffies, data->qsfp->last_updated + HZ + HZ / 2) && data->qsfp->valid) { + return data; + } + + dev_dbg(dev, "Starting sfp tx rx status update"); + mutex_lock(&data->update_lock); + data->qsfp->valid = 0; + memset(data->qsfp->status, 0, sizeof(data->qsfp->status)); + + /* Notify device to update tx fault/ tx disable/ rx los status */ + for (i = 0; i < ARRAY_SIZE(reg); i++) { + status = sfp_eeprom_read(data->client, reg[i], &buf, sizeof(buf)); + if (status < 0) { + goto exit; + } + } + msleep(200); + + /* Read actual tx fault/ tx disable/ rx los status */ + for (i = 0; i < ARRAY_SIZE(reg); i++) { + status = sfp_eeprom_read(data->client, reg[i], &buf, sizeof(buf)); + if (status < 0) { + goto exit; + } + + DEBUG_PRINT("qsfp reg(0x%x) status = (0x%x)", reg[i], data->qsfp->status[i]); + data->qsfp->status[i] = (buf & 0xF); + } + + data->qsfp->valid = 1; + data->qsfp->last_updated = jiffies; + mutex_unlock(&data->update_lock); + return data; + +exit: + mutex_unlock(&data->update_lock); + return NULL; +} + +static ssize_t qsfp_show_tx_rx_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + u8 val = 0; + struct i2c_client *client = to_i2c_client(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct sfp_port_data *data = i2c_get_clientdata(client); + + if (!sfp_is_port_present(client, data->port)) { + return -ENODEV; + } + + data = qsfp_update_tx_rx_status(dev); + if (!data) { + return -EIO; + } + + switch (attr->index) { + case TX_FAULT1: + case TX_FAULT2: + case TX_FAULT3: + case TX_FAULT4: + val = (data->qsfp->status[2] & BIT_INDEX(attr->index - TX_FAULT1)) ? 1 : 0; + break; + case TX_DISABLE1: + case TX_DISABLE2: + case TX_DISABLE3: + case TX_DISABLE4: + val = (data->qsfp->status[1] & BIT_INDEX(attr->index - TX_DISABLE1)) ? 1 : 0; + break; + case TX_DISABLE_ALL: + val = ((data->qsfp->status[1] & 0xF) == 0xF) ? 1 : 0; + break; + + case RX_LOS1: + case RX_LOS2: + case RX_LOS3: + case RX_LOS4: + val = (data->qsfp->status[0] & BIT_INDEX(attr->index - RX_LOS1)) ? 1 : 0; + break; + default: + break; + } + + return sprintf(buf, "%d\n", val); +} + +static ssize_t qsfp_set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + long disable; + int result; + struct i2c_client *client = to_i2c_client(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct sfp_port_data *data; + + result = kstrtol(buf, 10, &disable); + if (result) { + return result; + } + + data = qsfp_update_tx_rx_status(dev); + if (!data) { + return -EIO; + } + + mutex_lock(&data->update_lock); + + DEBUG_PRINT ("disable:%ld %d==%d %u\r\n", disable, attr->index, TX_DISABLE_ALL, data->qsfp->status[1]); + + if (attr->index == TX_DISABLE_ALL) + { + data->qsfp->status[1] = disable? 0xF:0; + } + else + { + if (disable) { + data->qsfp->status[1] |= (1 << (attr->index - TX_DISABLE1)); + } + else { + data->qsfp->status[1] &= ~(1 << (attr->index - TX_DISABLE1)); + } + } + DEBUG_PRINT("index = (%d), status = (0x%x)", attr->index, data->qsfp->status[1]); + result = sfp_eeprom_write(client, SFF8436_TX_DISABLE_ADDR, &data->qsfp->status[1], sizeof(data->qsfp->status[1])); + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t sfp_show_ddm_implemented(struct device *dev, struct device_attribute *da, + char *buf) +{ + int status; + char ddm; + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + + if (!sfp_is_port_present(client, data->port)) { + return -ENODEV; + } + + status = sfp_eeprom_read(data->client, SFF8472_DIAG_MON_TYPE_ADDR, &ddm, sizeof(ddm)); + if (status < 0) { + return -EIO; + } + + return sprintf(buf, "%d\n", (ddm & SFF8472_DIAG_MON_TYPE_DDM_MASK) ? 1 : 0); +} + +static ssize_t sfp_show_tx_rx_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + u8 val = 0, index = 0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct sfp_port_data *data; + + data = sfp_update_tx_rx_status(dev); + if (!data) { + return -EIO; + } + + switch (attr->index) { + case TX_FAULT: + index = 0; + break; + case TX_DISABLE: + index = 1; + break; + case RX_LOS: + index = 2; + break; + default: + break; + } + + val = (data->ddm->status[index] & BIT_INDEX(data->port)) ? 1 : 0; + return sprintf(buf, "%d\n", val); +} + +/* SFP/QSFP common attributes for sysfs */ +static SENSOR_DEVICE_ATTR(sfp_port_number, S_IRUGO, show_port_number, NULL, PORT_NUMBER); +static SENSOR_DEVICE_ATTR(sfp_is_present, S_IRUGO, show_present, NULL, PRESENT); +static SENSOR_DEVICE_ATTR(sfp_port_type, S_IRUGO, show_port_type, NULL, PORT_TYPE); +static SENSOR_DEVICE_ATTR(sfp_is_present_all, S_IRUGO, show_present, NULL, PRESENT); +static SENSOR_DEVICE_ATTR(sfp_port_reset, S_IWUSR | S_IRUGO, show_port_reset, sfp_set_port_reset, PORT_RESET); + +/* QSFP attributes for sysfs */ +static SENSOR_DEVICE_ATTR(sfp_rx_los1, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS1); +static SENSOR_DEVICE_ATTR(sfp_rx_los2, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS2); +static SENSOR_DEVICE_ATTR(sfp_rx_los3, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS3); +static SENSOR_DEVICE_ATTR(sfp_rx_los4, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS4); +static SENSOR_DEVICE_ATTR(sfp_tx_disable1, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE1); +static SENSOR_DEVICE_ATTR(sfp_tx_disable2, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE2); +static SENSOR_DEVICE_ATTR(sfp_tx_disable3, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE3); +static SENSOR_DEVICE_ATTR(sfp_tx_disable4, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE4); +static SENSOR_DEVICE_ATTR(sfp_tx_disable_all, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE_ALL); +static SENSOR_DEVICE_ATTR(sfp_tx_fault1, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT1); +static SENSOR_DEVICE_ATTR(sfp_tx_fault2, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT2); +static SENSOR_DEVICE_ATTR(sfp_tx_fault3, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT3); +static SENSOR_DEVICE_ATTR(sfp_tx_fault4, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT4); +static struct attribute *qsfp_attributes[] = { + &sensor_dev_attr_sfp_port_number.dev_attr.attr, + &sensor_dev_attr_sfp_port_type.dev_attr.attr, + &sensor_dev_attr_sfp_is_present.dev_attr.attr, + &sensor_dev_attr_sfp_port_reset.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los1.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los2.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los3.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los4.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable1.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable2.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable3.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable4.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable_all.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault1.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault2.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault3.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault4.dev_attr.attr, + NULL +}; + +/* SFP msa attributes for sysfs */ +static SENSOR_DEVICE_ATTR(sfp_ddm_implemented, S_IRUGO, sfp_show_ddm_implemented, NULL, DDM_IMPLEMENTED); +static struct attribute *sfp_msa_attributes[] = { + &sensor_dev_attr_sfp_port_number.dev_attr.attr, + &sensor_dev_attr_sfp_port_type.dev_attr.attr, + &sensor_dev_attr_sfp_is_present.dev_attr.attr, + &sensor_dev_attr_sfp_ddm_implemented.dev_attr.attr, + NULL +}; + +/* SFP ddm attributes for sysfs */ +static SENSOR_DEVICE_ATTR(sfp_rx_los, S_IRUGO, sfp_show_tx_rx_status, NULL, RX_LOS); +static SENSOR_DEVICE_ATTR(sfp_tx_disable, S_IWUSR | S_IRUGO, sfp_show_tx_rx_status, sfp_set_tx_disable, TX_DISABLE); +static SENSOR_DEVICE_ATTR(sfp_tx_fault, S_IRUGO, sfp_show_tx_rx_status, NULL, TX_FAULT); +static struct attribute *sfp_ddm_attributes[] = { + &sensor_dev_attr_sfp_tx_fault.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable.dev_attr.attr, + NULL +}; + +static ssize_t sfp_eeprom_write(struct i2c_client *client, u8 command, const char *data, + int data_len) +{ +#if USE_I2C_BLOCK_READ + int result, retry = I2C_RW_RETRY_COUNT; + + if (data_len > I2C_SMBUS_BLOCK_MAX) { + data_len = I2C_SMBUS_BLOCK_MAX; + } + + while (retry) { + result = i2c_smbus_write_i2c_block_data(client, command, data_len, data); + if (result < 0) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(result < 0)) { + return result; + } + + return data_len; +#else + int result, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + result = i2c_smbus_write_byte_data(client, command, *data); + if (result < 0) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(result < 0)) { + return result; + } + + return 1; +#endif + + +} + + +static ssize_t sfp_port_write(struct sfp_port_data *data, + const char *buf, loff_t off, size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) { + return count; + } + + /* + * Write data to chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&data->update_lock); + + while (count) { + ssize_t status; + + status = sfp_eeprom_write(data->client, off, buf, count); + if (status <= 0) { + if (retval == 0) { + retval = status; + } + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&data->update_lock); + return retval; +} + + +static ssize_t sfp_bin_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct sfp_port_data *data; + DEBUG_PRINT("offset = (%d), count = (%d)", off, count); + data = dev_get_drvdata(container_of(kobj, struct device, kobj)); + return sfp_port_write(data, buf, off, count); +} + +static ssize_t sfp_eeprom_read(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ +#if USE_I2C_BLOCK_READ + int result, retry = I2C_RW_RETRY_COUNT; + + if (data_len > I2C_SMBUS_BLOCK_MAX) { + data_len = I2C_SMBUS_BLOCK_MAX; + } + + while (retry) { + result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + if (result < 0) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(result < 0)) + goto abort; + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + + //result = data_len; + +abort: + return result; +#else + int result, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + result = i2c_smbus_read_byte_data(client, command); + if (result < 0) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(result < 0)) { + dev_dbg(&client->dev, "sfp read byte data failed, command(0x%2x), data(0x%2x)\r\n", command, result); + goto abort; + } + + *data = (u8)result; + result = 1; + +abort: + return result; +#endif +} + +static ssize_t sfp_port_read(struct sfp_port_data *data, + char *buf, loff_t off, size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) { + DEBUG_PRINT("Count = 0, return"); + return count; + } + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&data->update_lock); + + while (count) { + ssize_t status; + + status = sfp_eeprom_read(data->client, off, buf, count); + if (status <= 0) { + if (retval == 0) { + retval = status; + } + break; + } + + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&data->update_lock); + return retval; + +} + +static ssize_t sfp_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct sfp_port_data *data; + DEBUG_PRINT("offset = (%d), count = (%d)", off, count); + data = dev_get_drvdata(container_of(kobj, struct device, kobj)); + return sfp_port_read(data, buf, off, count); +} + +static int sfp_sysfs_eeprom_init(struct kobject *kobj, struct bin_attribute *eeprom) +{ + int err; + + sysfs_bin_attr_init(eeprom); + eeprom->attr.name = EEPROM_NAME; + eeprom->attr.mode = S_IWUSR | S_IRUGO; + eeprom->read = sfp_bin_read; + eeprom->write = sfp_bin_write; + eeprom->size = EEPROM_SIZE; + + /* Create eeprom file */ + err = sysfs_create_bin_file(kobj, eeprom); + if (err) { + return err; + } + + return 0; +} + +static int sfp_sysfs_eeprom_cleanup(struct kobject *kobj, struct bin_attribute *eeprom) +{ + sysfs_remove_bin_file(kobj, eeprom); + return 0; +} + +static const struct attribute_group sfp_msa_group = { + .attrs = sfp_msa_attributes, +}; + +static int sfp_i2c_check_functionality(struct i2c_client *client) +{ +#if USE_I2C_BLOCK_READ + return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK); +#else + return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA); +#endif +} + +static int sfp_msa_probe(struct i2c_client *client, const struct i2c_device_id *dev_id, + struct sfp_msa_data **data) +{ + int status; + struct sfp_msa_data *msa; + + if (!sfp_i2c_check_functionality(client)) { + status = -EIO; + goto exit; + } + + msa = kzalloc(sizeof(struct sfp_msa_data), GFP_KERNEL); + if (!msa) { + status = -ENOMEM; + goto exit; + } + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &sfp_msa_group); + if (status) { + goto exit_free; + } + + /* init eeprom */ + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &msa->eeprom.bin); + if (status) { + goto exit_remove; + } + + *data = msa; + dev_info(&client->dev, "sfp msa '%s'\n", client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &sfp_msa_group); +exit_free: + kfree(msa); +exit: + + return status; +} + +static const struct attribute_group sfp_ddm_group = { + .attrs = sfp_ddm_attributes, +}; + +static int sfp_ddm_probe(struct i2c_client *client, const struct i2c_device_id *dev_id, + struct sfp_ddm_data **data) +{ + int status; + struct sfp_ddm_data *ddm; + + if (!sfp_i2c_check_functionality(client)) { + status = -EIO; + goto exit; + } + + ddm = kzalloc(sizeof(struct sfp_ddm_data), GFP_KERNEL); + if (!ddm) { + status = -ENOMEM; + goto exit; + } + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &sfp_ddm_group); + if (status) { + goto exit_free; + } + + /* init eeprom */ + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &ddm->eeprom.bin); + if (status) { + goto exit_remove; + } + + *data = ddm; + dev_info(&client->dev, "sfp ddm '%s'\n", client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &sfp_ddm_group); +exit_free: + kfree(ddm); +exit: + + return status; +} + +static const struct attribute_group qsfp_group = { + .attrs = qsfp_attributes, +}; + +static int qsfp_probe(struct i2c_client *client, const struct i2c_device_id *dev_id, + struct qsfp_data **data) +{ + int status; + struct qsfp_data *qsfp; + + if (!sfp_i2c_check_functionality(client)) { + status = -EIO; + goto exit; + } + + qsfp = kzalloc(sizeof(struct qsfp_data), GFP_KERNEL); + if (!qsfp) { + status = -ENOMEM; + goto exit; + } + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &qsfp_group); + if (status) { + goto exit_free; + } + + /* init eeprom */ + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &qsfp->eeprom.bin); + if (status) { + goto exit_remove; + } + + /* Bring QSFPs out of reset + as6712_32x_i2c_cpld_write(0x62, 0x4, 0xFF); + as6712_32x_i2c_cpld_write(0x62, 0x5, 0xFF); + as6712_32x_i2c_cpld_write(0x64, 0x4, 0xFF); + as6712_32x_i2c_cpld_write(0x64, 0x5, 0xFF);*/ + + *data = qsfp; + dev_info(&client->dev, "qsfp '%s'\n", client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &qsfp_group); +exit_free: + kfree(qsfp); +exit: + + return status; +} + +static int sfp_device_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct sfp_port_data *data = NULL; + + data = kzalloc(sizeof(struct sfp_port_data), GFP_KERNEL); + if (!data) { + return -ENOMEM; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->port = dev_id->driver_data; + data->client = client; + + if (client->addr != SFP_EEPROM_A0_I2C_ADDR) { + return -ENODEV; + } + + data->driver_type = DRIVER_TYPE_QSFP; + return qsfp_probe(client, dev_id, &data->qsfp); +} + +static int sfp_msa_remove(struct i2c_client *client, struct sfp_msa_data *data) +{ + sfp_sysfs_eeprom_cleanup(&client->dev.kobj, &data->eeprom.bin); + sysfs_remove_group(&client->dev.kobj, &sfp_msa_group); + kfree(data); + return 0; +} + +static int sfp_ddm_remove(struct i2c_client *client, struct sfp_ddm_data *data) +{ + sfp_sysfs_eeprom_cleanup(&client->dev.kobj, &data->eeprom.bin); + sysfs_remove_group(&client->dev.kobj, &sfp_ddm_group); + kfree(data); + return 0; +} + +static int qfp_remove(struct i2c_client *client, struct qsfp_data *data) +{ + sfp_sysfs_eeprom_cleanup(&client->dev.kobj, &data->eeprom.bin); + sysfs_remove_group(&client->dev.kobj, &qsfp_group); + kfree(data); + return 0; +} + +static int sfp_device_remove(struct i2c_client *client) +{ + struct sfp_port_data *data = i2c_get_clientdata(client); + + switch (data->driver_type) { + case DRIVER_TYPE_SFP_MSA: + return sfp_msa_remove(client, data->msa); + case DRIVER_TYPE_SFP_DDM: + return sfp_ddm_remove(client, data->ddm); + case DRIVER_TYPE_QSFP: + return qfp_remove(client, data->qsfp); + } + + return 0; +} + +static struct i2c_driver sfp_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = sfp_device_probe, + .remove = sfp_device_remove, + .id_table = sfp_device_id, + .address_list = normal_i2c, +}; + +static int __init sfp_init(void) +{ + return i2c_add_driver(&sfp_driver); +} + +static void __exit sfp_exit(void) +{ + i2c_del_driver(&sfp_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton as7712_32x_sfp driver"); +MODULE_LICENSE("GPL"); + +module_init(sfp_init); +module_exit(sfp_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_i2c_cpld.c b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_i2c_cpld.c new file mode 120000 index 000000000000..39c0826d16fd --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_i2c_cpld.c @@ -0,0 +1 @@ +../../common/modules/accton_i2c_cpld.c \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_pmbus_3y.c b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_pmbus_3y.c new file mode 120000 index 000000000000..7504a0556e18 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/accton_pmbus_3y.c @@ -0,0 +1 @@ +../../common/modules/accton_pmbus_3y.c \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/leds-accton_as7712_32x.c b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/leds-accton_as7712_32x.c new file mode 100644 index 000000000000..5e1a9282db0e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/leds-accton_as7712_32x.c @@ -0,0 +1,690 @@ +/* + * A LED driver for the accton_as7712_32x_led + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +extern int accton_i2c_cpld_read (unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +extern void led_classdev_unregister(struct led_classdev *led_cdev); +extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); +extern void led_classdev_resume(struct led_classdev *led_cdev); +extern void led_classdev_suspend(struct led_classdev *led_cdev); + +#define DRVNAME "accton_as7712_32x_led" +#define ENABLE_PORT_LED 1 + +struct accton_as7712_32x_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[1]; /* only 1 register*/ +}; + +static struct accton_as7712_32x_led_data *ledctl = NULL; + +/* LED related data + */ + +#define LED_CNTRLER_I2C_ADDRESS (0x60) + +#define LED_TYPE_DIAG_REG_MASK (0x3) +#define LED_MODE_DIAG_GREEN_VALUE (0x02) +#define LED_MODE_DIAG_RED_VALUE (0x01) +#define LED_MODE_DIAG_AMBER_VALUE (0x00) /*It's yellow actually. Green+Red=Yellow*/ +#define LED_MODE_DIAG_OFF_VALUE (0x03) + +#define LED_TYPE_LOC_REG_MASK (0x80) +#define LED_MODE_LOC_ON_VALUE (0) +#define LED_MODE_LOC_OFF_VALUE (0x80) + +#if (ENABLE_PORT_LED == 1) +#define LED_TYPE_PORT_LED(port) \ + LED_TYPE_PORT##port##_LED0, \ + LED_TYPE_PORT##port##_LED1, \ + LED_TYPE_PORT##port##_LED2, \ + LED_TYPE_PORT##port##_LED3 +#endif + +enum led_type { + LED_TYPE_DIAG, + LED_TYPE_LOC, + LED_TYPE_FAN, + LED_TYPE_PSU1, + LED_TYPE_PSU2, +#if (ENABLE_PORT_LED == 1) + LED_TYPE_PORT_LED(0), + LED_TYPE_PORT_LED(1), + LED_TYPE_PORT_LED(2), + LED_TYPE_PORT_LED(3), + LED_TYPE_PORT_LED(4), + LED_TYPE_PORT_LED(5), + LED_TYPE_PORT_LED(6), + LED_TYPE_PORT_LED(7), + LED_TYPE_PORT_LED(8), + LED_TYPE_PORT_LED(9), + LED_TYPE_PORT_LED(10), + LED_TYPE_PORT_LED(11), + LED_TYPE_PORT_LED(12), + LED_TYPE_PORT_LED(13), + LED_TYPE_PORT_LED(14), + LED_TYPE_PORT_LED(15), + LED_TYPE_PORT_LED(16), + LED_TYPE_PORT_LED(17), + LED_TYPE_PORT_LED(18), + LED_TYPE_PORT_LED(19), + LED_TYPE_PORT_LED(20), + LED_TYPE_PORT_LED(21), + LED_TYPE_PORT_LED(22), + LED_TYPE_PORT_LED(23), + LED_TYPE_PORT_LED(24), + LED_TYPE_PORT_LED(25), + LED_TYPE_PORT_LED(26), + LED_TYPE_PORT_LED(27), + LED_TYPE_PORT_LED(28), + LED_TYPE_PORT_LED(29), + LED_TYPE_PORT_LED(30), + LED_TYPE_PORT_LED(31), +#endif +}; + +struct led_reg { + u32 types; + u8 reg_addr; +}; + +static const struct led_reg led_reg_map[] = { + {(1<update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting accton_as7712_32x_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = accton_as7712_32x_led_read_value(led_reg_map[i].reg_addr); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg_map[i].reg_addr, status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void accton_as7712_32x_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + enum led_type type) +{ + int reg_val; + u8 reg ; + mutex_lock(&ledctl->update_lock); + + if( !accton_getLedReg(type, ®)) + { + dev_dbg(&ledctl->pdev->dev, "Not match item for %d.\n", type); + } + + reg_val = accton_as7712_32x_led_read_value(reg); + + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + accton_as7712_32x_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + + +static void accton_as7712_32x_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as7712_32x_led_set(led_cdev, led_light_mode, LED_TYPE_DIAG); +} + +static enum led_brightness accton_as7712_32x_led_diag_get(struct led_classdev *cdev) +{ + accton_as7712_32x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void accton_as7712_32x_led_loc_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + accton_as7712_32x_led_set(led_cdev, led_light_mode, LED_TYPE_LOC); +} + +static enum led_brightness accton_as7712_32x_led_loc_get(struct led_classdev *cdev) +{ + accton_as7712_32x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_LOC, ledctl->reg_val[0]); +} + +static void accton_as7712_32x_led_auto_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ +} + +static enum led_brightness accton_as7712_32x_led_auto_get(struct led_classdev *cdev) +{ + return LED_MODE_AUTO; +} + +#if (ENABLE_PORT_LED == 1) +#define PORT_LED_COLOR_MASK (0x7 << 2) +#define PORT_LED_COLOR1_REG_VAL (0x0 << 2) +#define PORT_LED_COLOR2_REG_VAL (0x1 << 2) +#define PORT_LED_COLOR3_REG_VAL (0x2 << 2) +#define PORT_LED_COLOR4_REG_VAL (0x3 << 2) +#define PORT_LED_COLOR5_REG_VAL (0x4 << 2) +#define PORT_LED_COLOR6_REG_VAL (0x5 << 2) +#define PORT_LED_COLOR7_REG_VAL (0x6 << 2) +#define PORT_LED_COLOR8_REG_VAL (0x7 << 2) + +static int accton_as7712_32x_port_led_read_value(unsigned short cpld_addr, u8 reg) +{ + return accton_i2c_cpld_read(cpld_addr, reg); +} + +static int accton_as7712_32x_port_led_write_value(unsigned short cpld_addr, u8 reg, u8 value) +{ + return accton_i2c_cpld_write(cpld_addr, reg, value); +} + +static int port_led_mode_to_cpld_val(int mode) +{ + u8 color = 0; + u8 blinking = 0; + u8 on = 1 << 0; + + switch (mode) { + case LED_MODE_WHITE_BLINKING: blinking = 1 << 1; /* fall through */ + case LED_MODE_WHITE: color = 0x0 << 2; + break; + case LED_MODE_YELLOW_BLINKING: blinking = 1 << 1; /* fall through */ + case LED_MODE_YELLOW: color = 0x1 << 2; + break; + case LED_MODE_ORANGE_BLINKING: blinking = 1 << 1; /* fall through */ + case LED_MODE_ORANGE: color = 0x2 << 2; + break; + case LED_MODE_PURPLE_BLINKING: blinking = 1 << 1; /* fall through */ + case LED_MODE_PURPLE: color = 0x3 << 2; + break; + case LED_MODE_CYAN_BLINKING: blinking = 1 << 1; /* fall through */ + case LED_MODE_CYAN: color = 0x4 << 2; + break; + case LED_MODE_RED_BLINKING: blinking = 1 << 1; /* fall through */ + case LED_MODE_RED: color = 0x5 << 2; + break; + case LED_MODE_GREEN_BLINKING: blinking = 1 << 1; /* fall through */ + case LED_MODE_GREEN: color = 0x6 << 2; + break; + case LED_MODE_BLUE_BLINKING: blinking = 1 << 1; /* fall through */ + case LED_MODE_BLUE: color = 0x7 << 2; + break; + case LED_MODE_OFF: on = 0 << 0; + break; + default: + return -EINVAL; + } + + return (color | blinking | on); +} + +static int cpld_val_to_port_led_mode(uint8_t value) +{ + int on = (value & 0x1); + int blinking = (value & 0x2); + int color = (value & PORT_LED_COLOR_MASK) ; + + if (!on) { + return LED_MODE_OFF; + } + + switch (color) { + case PORT_LED_COLOR1_REG_VAL: + return blinking ? LED_MODE_WHITE_BLINKING : LED_MODE_WHITE; + case PORT_LED_COLOR2_REG_VAL: + return blinking ? LED_MODE_YELLOW_BLINKING : LED_MODE_YELLOW; + case PORT_LED_COLOR3_REG_VAL: + return blinking ? LED_MODE_ORANGE_BLINKING : LED_MODE_ORANGE; + case PORT_LED_COLOR4_REG_VAL: + return blinking ? LED_MODE_PURPLE_BLINKING : LED_MODE_PURPLE; + case PORT_LED_COLOR5_REG_VAL: + return blinking ? LED_MODE_CYAN_BLINKING : LED_MODE_CYAN; + case PORT_LED_COLOR6_REG_VAL: + return blinking ? LED_MODE_RED_BLINKING : LED_MODE_RED; + case PORT_LED_COLOR7_REG_VAL: + return blinking ? LED_MODE_GREEN_BLINKING : LED_MODE_GREEN; + case PORT_LED_COLOR8_REG_VAL: + return blinking ? LED_MODE_BLUE_BLINKING : LED_MODE_BLUE; + default: + return -EINVAL;; + } +} + + +static void accton_as7712_32x_port_led_set(struct led_classdev *cdev, + enum led_brightness led_light_mode) +{ + unsigned int port, lid; + unsigned short cpld_addr; + u8 reg, value; + sscanf(cdev->name, "accton_as7712_32x_led::port%u_led%u", &port, &lid); + + if (port > 32 || lid > 4) { + dev_dbg(&ledctl->pdev->dev, "Port(%u), Led_id(%u) not match\n", port, lid); + return; + } + + cpld_addr = (port < 16) ? 0x64 : 0x62; + reg = (0x50 + (port % 16) * 4 + lid); + value = port_led_mode_to_cpld_val(led_light_mode); + + if (value < 0) { + dev_dbg(&ledctl->pdev->dev, "Unknow port led mode(%d)\n", led_light_mode); + return; + } + + accton_as7712_32x_port_led_write_value(cpld_addr, reg, value); +} + +static enum led_brightness accton_as7712_32x_port_led_get(struct led_classdev *cdev) +{ + unsigned int port, lid; + unsigned short cpld_addr; + u8 reg, value; + sscanf(cdev->name, "accton_as7712_32x_led::port%u_led%u", &port, &lid); + + if (port > 32 || lid > 4) { + dev_dbg(&ledctl->pdev->dev, "Port(%u), Led_id(%u) not match\n", port, lid); + return -EINVAL; + } + + cpld_addr = (port < 16) ? 0x64 : 0x62; + reg = (0x50 + (port % 16) * 4 + lid); + value = accton_as7712_32x_port_led_read_value(cpld_addr, reg); + + if (value < 0) { + dev_dbg(&ledctl->pdev->dev, "Unable to read reg value from cpld(0x%x), reg(0x%x)\n", cpld_addr, reg); + return value; + } + + return cpld_val_to_port_led_mode(value); +} + +#define _PORT_LED_CLASSDEV(port, lid) \ + [LED_TYPE_PORT##port##_LED##lid] = { \ + .name = "accton_as7712_32x_led::port"#port"_led"#lid,\ + .default_trigger = "unused", \ + .brightness_set = accton_as7712_32x_port_led_set, \ + .brightness_get = accton_as7712_32x_port_led_get, \ + .max_brightness = LED_MODE_CYAN_BLINKING, \ + } + +#define PORT_LED_CLASSDEV(port) \ + _PORT_LED_CLASSDEV(port, 0),\ + _PORT_LED_CLASSDEV(port, 1),\ + _PORT_LED_CLASSDEV(port, 2),\ + _PORT_LED_CLASSDEV(port, 3) +#endif + +static struct led_classdev accton_as7712_32x_leds[] = { + [LED_TYPE_DIAG] = { + .name = "accton_as7712_32x_led::diag", + .default_trigger = "unused", + .brightness_set = accton_as7712_32x_led_diag_set, + .brightness_get = accton_as7712_32x_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_RED, + }, + [LED_TYPE_LOC] = { + .name = "accton_as7712_32x_led::loc", + .default_trigger = "unused", + .brightness_set = accton_as7712_32x_led_loc_set, + .brightness_get = accton_as7712_32x_led_loc_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_BLUE, + }, + [LED_TYPE_FAN] = { + .name = "accton_as7712_32x_led::fan", + .default_trigger = "unused", + .brightness_set = accton_as7712_32x_led_auto_set, + .brightness_get = accton_as7712_32x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU1] = { + .name = "accton_as7712_32x_led::psu1", + .default_trigger = "unused", + .brightness_set = accton_as7712_32x_led_auto_set, + .brightness_get = accton_as7712_32x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU2] = { + .name = "accton_as7712_32x_led::psu2", + .default_trigger = "unused", + .brightness_set = accton_as7712_32x_led_auto_set, + .brightness_get = accton_as7712_32x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, +#if (ENABLE_PORT_LED == 1) + PORT_LED_CLASSDEV(0), + PORT_LED_CLASSDEV(1), + PORT_LED_CLASSDEV(2), + PORT_LED_CLASSDEV(3), + PORT_LED_CLASSDEV(4), + PORT_LED_CLASSDEV(5), + PORT_LED_CLASSDEV(6), + PORT_LED_CLASSDEV(7), + PORT_LED_CLASSDEV(8), + PORT_LED_CLASSDEV(9), + PORT_LED_CLASSDEV(10), + PORT_LED_CLASSDEV(11), + PORT_LED_CLASSDEV(12), + PORT_LED_CLASSDEV(13), + PORT_LED_CLASSDEV(14), + PORT_LED_CLASSDEV(15), + PORT_LED_CLASSDEV(16), + PORT_LED_CLASSDEV(17), + PORT_LED_CLASSDEV(18), + PORT_LED_CLASSDEV(19), + PORT_LED_CLASSDEV(20), + PORT_LED_CLASSDEV(21), + PORT_LED_CLASSDEV(22), + PORT_LED_CLASSDEV(23), + PORT_LED_CLASSDEV(24), + PORT_LED_CLASSDEV(25), + PORT_LED_CLASSDEV(26), + PORT_LED_CLASSDEV(27), + PORT_LED_CLASSDEV(28), + PORT_LED_CLASSDEV(29), + PORT_LED_CLASSDEV(30), + PORT_LED_CLASSDEV(31), +#endif +}; + +static int accton_as7712_32x_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as7712_32x_leds); i++) { + led_classdev_suspend(&accton_as7712_32x_leds[i]); + } + + return 0; +} + +static int accton_as7712_32x_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(accton_as7712_32x_leds); i++) { + led_classdev_resume(&accton_as7712_32x_leds[i]); + } + + return 0; +} + +static int accton_as7712_32x_led_probe(struct platform_device *pdev) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(accton_as7712_32x_leds); i++) { + ret = led_classdev_register(&pdev->dev, &accton_as7712_32x_leds[i]); + + if (ret < 0) + break; + } + + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(accton_as7712_32x_leds)){ + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&accton_as7712_32x_leds[i]); + } + } + + return ret; +} + +static int accton_as7712_32x_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(accton_as7712_32x_leds); i++) { + led_classdev_unregister(&accton_as7712_32x_leds[i]); + } + + return 0; +} + +static struct platform_driver accton_as7712_32x_led_driver = { + .probe = accton_as7712_32x_led_probe, + .remove = accton_as7712_32x_led_remove, + .suspend = accton_as7712_32x_led_suspend, + .resume = accton_as7712_32x_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init accton_as7712_32x_led_init(void) +{ + int ret; + + ret = platform_driver_register(&accton_as7712_32x_led_driver); + if (ret < 0) { + goto exit; + } + + ledctl = kzalloc(sizeof(struct accton_as7712_32x_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&accton_as7712_32x_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&accton_as7712_32x_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return ret; +} + +static void __exit accton_as7712_32x_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&accton_as7712_32x_led_driver); + kfree(ledctl); +} + +module_init(accton_as7712_32x_led_init); +module_exit(accton_as7712_32x_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_as7712_32x_led driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/pmbus.h b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/pmbus.h new file mode 120000 index 000000000000..b0e1a57107fd --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/pmbus.h @@ -0,0 +1 @@ +../../common/modules/pmbus.h \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/ym2651y.c new file mode 120000 index 000000000000..f4d67640ccc3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/modules/ym2651y.c @@ -0,0 +1 @@ +../../common/modules/ym2651y.c \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/service/as7712-platform-init.service b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/service/as7712-platform-init.service new file mode 100755 index 000000000000..d5d25b6cde04 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/service/as7712-platform-init.service @@ -0,0 +1,13 @@ +[Unit] +Description=Accton AS7712-32X Platform initialization service +Before=pmon.service +DefaultDependencies=no + +[Service] +Type=oneshot +ExecStart=/usr/local/bin/accton_as7712_util.py install +ExecStop=/usr/local/bin/accton_as7712_util.py clean +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/setup.py b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/setup.py new file mode 100755 index 000000000000..09c763c84f01 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/setup.py @@ -0,0 +1,16 @@ +#!/usr/bin/env python + +import os +import sys +from setuptools import setup +os.listdir + +setup( + name='as7712_32x', + version='1.0', + description='Module to initialize Accton AS7712-32X platforms', + + packages=['as7712_32x'], + package_dir={'as7712_32x': 'as7712-32x/classes'}, +) + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/utils/README b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/utils/README new file mode 100755 index 000000000000..0b9fc1633999 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/utils/README @@ -0,0 +1,60 @@ +Copyright (C) 2016 Accton Networks, Inc. + +This program is free software: you can redistribute it and/or modify +It under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +To initialize the system, run "accton_as7712_util.py install". +To clean up the drivers & devices, run "accton_as7712_util.py clean". +To dump information of sensors, run "accton_as7712_util.py show". +To dump SFP EEPROM, run "accton_as7712_util.py sff". +To set fan speed, run "accton_as7712_util.py set fan". +To enable/disable SFP emission, run "accton_as7712_util.py set sfp". +To set system LEDs' color, run "accton_as7712_util.py set led" +For more information, run "accton_as7712_util.py --help". + +==================================================================== +Besides applying accton_as7712_util.py to access peripherals, you can +access peripherals by sysfs nodes directly after the installation is run. + +LED controls can be found under /sys/class/leds. The sysfs interface +color mappings are as follows: +Brightness: + 0 => off + 1 => green + 2 => amber + 3 => red + 4 => blue + +There are 5 system LEDs, loc, diag, fan, ps1, and ps2. +They are lit automatically by CPLD, but the loc and diag. +The loc led has only 1 color, blue. +The diag one has 3 colors: red, amber, and green. + +Fan controls can be found in /sys/bus/i2c/devices/2-0066. +There are 12 fans inside 6 fan modules. +All fans share 1 duty setting, ranged from 0~100. + +Three temperature sensors are controlled by the lm75 kernel modules. +They should already be visible under /sys/bus/i2c/drivers/lm75/. + +Two power supplies are controlled by the CPLD. +Here provide their status under +/sys/bus/i2c/devices/10-0050 and /sys/bus/i2c/devices/11-0053. + +There are 32 QSFP+ modules are equipped. +Apply "accton_as7712_util.py show" to get their status. +Apply "accton_as7712_util.py set sfp" to turn on/off light transmission. +Apply "accton_as7712_util.py sff" to dump EEPROM information. +Before operating on that QSFP+, please make sure it is well plugged. +Otherwise, operation is going to fail. + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7712-32x/utils/accton_as7712_util.py b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/utils/accton_as7712_util.py new file mode 100755 index 000000000000..c8b755b85b69 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7712-32x/utils/accton_as7712_util.py @@ -0,0 +1,569 @@ +#!/usr/bin/env python +# +# Copyright (C) 2016 Accton Networks, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes + show : show all systen status + sff : dump SFP eeprom + set : change board setting with fan|led|sfp +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + + + + +PROJECT_NAME = 'as7712_32x' +version = '0.1.0' +verbose = False +DEBUG = False +args = [] +ALL_DEVICE = {} +DEVICE_NO = {'led':5, 'fan':6,'thermal':4, 'psu':2, 'sfp':32} +FORCE = 0 +#logging.basicConfig(filename= PROJECT_NAME+'.log', filemode='w',level=logging.DEBUG) +#logging.basicConfig(level=logging.INFO) + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + do_install() + elif arg == 'clean': + do_uninstall() + elif arg == 'show': + device_traversal() + elif arg == 'sff': + if len(args)!=2: + show_eeprom_help() + elif int(args[1]) ==0 or int(args[1]) > DEVICE_NO['sfp']: + show_eeprom_help() + else: + show_eeprom(args[1]) + return + elif arg == 'set': + if len(args)<3: + show_set_help() + else: + set_device(args[1:]) + return + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_set_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print cmd +" [led|sfp|fan]" + print " use \""+ cmd + " led 0-4 \" to set led color" + print " use \""+ cmd + " fan 0-100\" to set fan duty percetage" + print " use \""+ cmd + " sfp 1-32 {0|1}\" to set sfp# tx_disable" + sys.exit(0) + +def show_eeprom_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print " use \""+ cmd + " 1-32 \" to dump sfp# eeprom" + sys.exit(0) + +def my_log(txt): + if DEBUG == True: + print "[ROY]"+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status, output = commands.getstatusoutput(cmd) + my_log (cmd +"with result:" + str(status)) + my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +def driver_check(): + ret, lsmod = log_os_system("lsmod| grep accton", 0) + logging.info('mods:'+lsmod) + if len(lsmod) ==0: + return False + return True + + + +kos = [ +'modprobe i2c_dev', +'modprobe i2c_mux_pca954x force_deselect_on_exit=1', +'modprobe accton_i2c_cpld' , +'modprobe ym2651y' , +'modprobe accton_as7712_32x_fan' , +'modprobe optoe' , +'modprobe leds-accton_as7712_32x' , +'modprobe accton_as7712_32x_psu' ] + +def driver_install(): + global FORCE + status, output = log_os_system("depmod", 1) + for i in range(0,len(kos)): + status, output = log_os_system(kos[i], 1) + if status: + if FORCE == 0: + return status + return 0 + +def driver_uninstall(): + global FORCE + for i in range(0,len(kos)): + rm = kos[-(i+1)].replace("modprobe", "modprobe -rq") + rm = rm.replace("insmod", "rmmod") + status, output = log_os_system(rm, 1) + if status: + if FORCE == 0: + return status + return 0 + +led_prefix ='/sys/class/leds/accton_'+PROJECT_NAME+'_led::' +hwmon_types = {'led': ['diag','fan','loc','psu1','psu2']} +hwmon_nodes = {'led': ['brightness'] } +hwmon_prefix ={'led': led_prefix} + +i2c_prefix = '/sys/bus/i2c/devices/' +i2c_bus = {'fan': ['2-0066'] , + 'thermal': ['3-0048','3-0049', '3-004a', '3-004b'] , + 'psu': ['10-0050','11-0053'], + 'sfp': ['-0050']} +i2c_nodes = {'fan': ['present', 'front_speed_rpm', 'rear_speed_rpm'] , + 'thermal': ['hwmon/hwmon*/temp1_input'] , + 'psu': ['psu_present ', 'psu_power_good'] , + 'sfp': ['module_present', 'sfp_tx_disable_all']} + +sfp_map = [22,23,24,25,27,26,29,28, + 18,19,20,21,30,31,32,33, + 34,35,36,37,46,47,48,49, + 38,39,40,41,42,43,44,45] +mknod =[ +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-1/new_device' , +'echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-1/new_device' , +'echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-1/new_device' , +'echo pca9548 0x74 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x75 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-1/new_device', + +'echo as7712_32x_fan 0x66 > /sys/bus/i2c/devices/i2c-2/new_device ', +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x4b > /sys/bus/i2c/devices/i2c-3/new_device', +'echo as7712_32x_psu1 0x53 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo ym2651 0x5b > /sys/bus/i2c/devices/i2c-11/new_device', +'echo as7712_32x_psu2 0x50 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo ym2651 0x58 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo cpld_as7712 0x60 > /sys/bus/i2c/devices/i2c-4/new_device', +'echo cpld_plain 0x62 > /sys/bus/i2c/devices/i2c-5/new_device', +'echo cpld_plain 0x64 > /sys/bus/i2c/devices/i2c-6/new_device'] + +mknod2 =[ +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-0/new_device' , +'echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-0/new_device' , +'echo pca9548 0X73 > /sys/bus/i2c/devices/i2c-0/new_device' , +'echo pca9548 0x74 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x75 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-0/new_device', + +'echo as7712_32x_fan 0x66 > /sys/bus/i2c/devices/i2c-2/new_device ', +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-3/new_device', +'echo lm75 0x4b > /sys/bus/i2c/devices/i2c-3/new_device', +'echo as7712_32x_psu1 0x53 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo ym2651 0x5b > /sys/bus/i2c/devices/i2c-11/new_device', +'echo as7712_32x_psu2 0x50 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo ym2651 0x58 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo cpld_as7712 0x60 > /sys/bus/i2c/devices/i2c-4/new_device', +'echo cpld_plain 0x62 > /sys/bus/i2c/devices/i2c-5/new_device', +'echo cpld_plain 0x64 > /sys/bus/i2c/devices/i2c-6/new_device'] + + +def i2c_order_check(): + # i2c bus 0 and 1 might be installed in different order. + # Here check if 0x76 is exist @ i2c-0 + tmp = "echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-0/new_device" + status, output = log_os_system(tmp, 0) + if not device_exist(): + order = 1 + else: + order = 0 + tmp = "echo 0x76 > /sys/bus/i2c/devices/i2c-0/delete_device" + status, output = log_os_system(tmp, 0) + return order + +def device_install(): + global FORCE + + order = i2c_order_check() + + # if 0x76 is not exist @i2c-0, use reversed bus order + if order: + for i in range(0,len(mknod2)): + #for pca954x need times to built new i2c buses + if mknod2[i].find('pca954') != -1: + time.sleep(1) + + status, output = log_os_system(mknod2[i], 1) + if status: + print output + if FORCE == 0: + return status + else: + for i in range(0,len(mknod)): + #for pca954x need times to built new i2c buses + if mknod[i].find('pca954') != -1: + time.sleep(1) + + status, output = log_os_system(mknod[i], 1) + if status: + print output + if FORCE == 0: + return status + for i in range(0,len(sfp_map)): + status, output =log_os_system("echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + return + +def device_uninstall(): + global FORCE + + status, output =log_os_system("ls /sys/bus/i2c/devices/1-0076", 0) + if status==0: + I2C_ORDER=1 + else: + I2C_ORDER=0 + + for i in range(0,len(sfp_map)): + target = "/sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/delete_device" + status, output =log_os_system("echo 0x50 > "+ target, 1) + if status: + print output + if FORCE == 0: + return status + + if I2C_ORDER==0: + nodelist = mknod + else: + nodelist = mknod2 + + for i in range(len(nodelist)): + target = nodelist[-(i+1)] + temp = target.split() + del temp[1] + temp[-1] = temp[-1].replace('new_device', 'delete_device') + status, output = log_os_system(" ".join(temp), 1) + if status: + print output + if FORCE == 0: + return status + + return + +def system_ready(): + if driver_check() == False: + return False + if not device_exist(): + return False + return True + +def do_install(): + print "Checking system...." + if driver_check() == False: + print "No driver, installing...." + status = driver_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" drivers detected...." + if not device_exist(): + print "No device, installing...." + status = device_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" devices detected...." + return + +def do_uninstall(): + print "Checking system...." + if not device_exist(): + print PROJECT_NAME.upper() +" has no device installed...." + else: + print "Removing device...." + status = device_uninstall() + if status: + if FORCE == 0: + return status + + if driver_check()== False : + print PROJECT_NAME.upper() +" has no driver installed...." + else: + print "Removing installed driver...." + status = driver_uninstall() + if status: + if FORCE == 0: + return status + + return + +def devices_info(): + global DEVICE_NO + global ALL_DEVICE + global i2c_bus, hwmon_types + for key in DEVICE_NO: + ALL_DEVICE[key]= {} + for i in range(0,DEVICE_NO[key]): + ALL_DEVICE[key][key+str(i+1)] = [] + + for key in i2c_bus: + buses = i2c_bus[key] + nodes = i2c_nodes[key] + for i in range(0,len(buses)): + for j in range(0,len(nodes)): + if 'fan' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ buses[i]+"/fan"+str(k+1)+"_"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + elif 'sfp' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ str(sfp_map[k])+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + else: + node = key+str(i+1) + path = i2c_prefix+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + + for key in hwmon_types: + itypes = hwmon_types[key] + nodes = hwmon_nodes[key] + for i in range(0,len(itypes)): + for j in range(0,len(nodes)): + node = key+"_"+itypes[i] + path = hwmon_prefix[key]+ itypes[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][ key+str(i+1)].append(path) + + #show dict all in the order + if DEBUG == True: + for i in sorted(ALL_DEVICE.keys()): + print(i+": ") + for j in sorted(ALL_DEVICE[i].keys()): + print(" "+j) + for k in (ALL_DEVICE[i][j]): + print(" "+" "+k) + return + +def show_eeprom(index): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + node = ALL_DEVICE['sfp'] ['sfp'+str(index)][0] + node = node.replace(node.split("/")[-1], 'sfp_eeprom') + # check if got hexdump command in current environment + ret, log = log_os_system("which hexdump", 0) + ret, log2 = log_os_system("which busybox hexdump", 0) + if len(log): + hex_cmd = 'hexdump' + elif len(log2): + hex_cmd = ' busybox hexdump' + else: + log = 'Failed : no hexdump cmd!!' + logging.info(log) + print log + return 1 + + print node + ":" + ret, log = log_os_system("cat "+node+"| "+hex_cmd+" -C", 1) + if ret==0: + print log + else: + print "**********device no found**********" + return + +def set_device(args): + global DEVICE_NO + global ALL_DEVICE + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + + if args[0]=='led': + if int(args[1])>4: + show_set_help() + return + #print ALL_DEVICE['led'] + for i in range(0,len(ALL_DEVICE['led'])): + for k in (ALL_DEVICE['led']['led'+str(i+1)]): + ret, log = log_os_system("echo "+args[1]+" >"+k, 1) + if ret: + return ret + elif args[0]=='fan': + if int(args[1])>100: + show_set_help() + return + #print ALL_DEVICE['fan'] + #fan1~6 is all fine, all fan share same setting + node = ALL_DEVICE['fan'] ['fan1'][0] + node = node.replace(node.split("/")[-1], 'fan_duty_cycle_percentage') + ret, log = log_os_system("cat "+ node, 1) + if ret==0: + print ("Previous fan duty: " + log.strip() +"%") + ret, log = log_os_system("echo "+args[1]+" >"+node, 1) + if ret==0: + print ("Current fan duty: " + args[1] +"%") + return ret + elif args[0]=='sfp': + if int(args[1])> DEVICE_NO[args[0]] or int(args[1])==0: + show_set_help() + return + if len(args)<2: + show_set_help() + return + + if int(args[2])>1: + show_set_help() + return + + #print ALL_DEVICE[args[0]] + for i in range(0,len(ALL_DEVICE[args[0]])): + for j in ALL_DEVICE[args[0]][args[0]+str(args[1])]: + if j.find('tx_disable')!= -1: + ret, log = log_os_system("echo "+args[2]+" >"+ j, 1) + if ret: + return ret + + return + +#get digits inside a string. +#Ex: 31 for "sfp31" +def get_value(input): + digit = re.findall('\d+', input) + return int(digit[0]) + +def device_traversal(): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + for i in sorted(ALL_DEVICE.keys()): + print("============================================") + print(i.upper()+": ") + print("============================================") + + for j in sorted(ALL_DEVICE[i].keys(), key=get_value): + print " "+j+":", + for k in (ALL_DEVICE[i][j]): + ret, log = log_os_system("cat "+k, 0) + func = k.split("/")[-1].strip() + func = re.sub(j+'_','',func,1) + func = re.sub(i.lower()+'_','',func,1) + if ret==0: + print func+"="+log+" ", + else: + print func+"="+"X"+" ", + print + print("----------------------------------------------------------------") + + + print + return + +def device_exist(): + ret1, log = log_os_system("ls "+i2c_prefix+"*0076", 0) + ret2, log = log_os_system("ls "+i2c_prefix+"i2c-2", 0) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/__init__.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/__init__.py new file mode 100755 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/fanutil.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/fanutil.py new file mode 100755 index 000000000000..9a69f6e1d537 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/fanutil.py @@ -0,0 +1,254 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018: Jostar modify for as7716_32 +# ------------------------------------------------------------------ + +try: + import time + import logging + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class FanUtil(object): + """Platform-specific FanUtil class""" + + FAN_NUM_ON_MAIN_BROAD = 6 + FAN_NUM_1_IDX = 1 + FAN_NUM_2_IDX = 2 + FAN_NUM_3_IDX = 3 + FAN_NUM_4_IDX = 4 + FAN_NUM_5_IDX = 5 + FAN_NUM_6_IDX = 6 + + FAN_NODE_NUM_OF_MAP = 2 + FAN_NODE_FAULT_IDX_OF_MAP = 1 + #FAN_NODE_SPEED_IDX_OF_MAP = 2 + FAN_NODE_DIR_IDX_OF_MAP = 2 + #FAN_NODE_DUTY_IDX_OF_MAP = 4 + #FANR_NODE_FAULT_IDX_OF_MAP = 5 + + #BASE_VAL_PATH = '/sys/devices/platform/as5712_54x_fan/{0}' + BASE_VAL_PATH = '/sys/bus/i2c/devices/9-0066/{0}' + FAN_DUTY_PATH = '/sys/bus/i2c/devices/9-0066/fan_duty_cycle_percentage' + + #logfile = '' + #loglevel = logging.INFO + + """ Dictionary where + key1 = fan id index (integer) starting from 1 + key2 = fan node index (interger) starting from 1 + value = path to fan device file (string) """ + _fan_to_device_path_mapping = {} + +#fan1_direction +#fan1_fault +#fan1_present + + #(FAN_NUM_2_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan2_duty_cycle_percentage', + _fan_to_device_node_mapping = { + (FAN_NUM_1_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan1_fault', + (FAN_NUM_1_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan1_direction', + + (FAN_NUM_2_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan2_fault', + (FAN_NUM_2_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan2_direction', + + (FAN_NUM_3_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan3_fault', + (FAN_NUM_3_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan3_direction', + + (FAN_NUM_4_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan4_fault', + (FAN_NUM_4_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan4_direction', + + (FAN_NUM_5_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan5_fault', + (FAN_NUM_5_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan5_direction', + + (FAN_NUM_6_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan6_fault', + (FAN_NUM_6_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan6_direction', + } + + def _get_fan_to_device_node(self, fan_num, node_num): + return self._fan_to_device_node_mapping[(fan_num, node_num)] + + def _get_fan_node_val(self, fan_num, node_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + + try: + val_file = open(device_path, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + def _set_fan_node_val(self, fan_num, node_num, val): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + content = str(val) + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + try: + val_file = open(device_path, 'w') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + val_file.write(content) + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return True + + def __init__(self): + fan_path = self.BASE_VAL_PATH + + for fan_num in range(self.FAN_NUM_1_IDX, self.FAN_NUM_ON_MAIN_BROAD+1): + for node_num in range(self.FAN_NODE_FAULT_IDX_OF_MAP, self.FAN_NODE_NUM_OF_MAP+1): + self._fan_to_device_path_mapping[(fan_num, node_num)] = fan_path.format( + self._fan_to_device_node_mapping[(fan_num, node_num)]) + + def get_num_fans(self): + return self.FAN_NUM_ON_MAIN_BROAD + + def get_idx_fan_start(self): + return self.FAN_NUM_1_IDX + + def get_num_nodes(self): + return self.FAN_NODE_NUM_OF_MAP + + def get_idx_node_start(self): + return self.FAN_NODE_FAULT_IDX_OF_MAP + + def get_size_node_map(self): + return len(self._fan_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._fan_to_device_path_mapping) + + def get_fan_to_device_path(self, fan_num, node_num): + return self._fan_to_device_path_mapping[(fan_num, node_num)] + + def get_fan_fault(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_FAULT_IDX_OF_MAP) + + #def get_fan_speed(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FAN_NODE_SPEED_IDX_OF_MAP) + + def get_fan_dir(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_DIR_IDX_OF_MAP) + + def get_fan_duty_cycle(self): + #duty_path = self.FAN_DUTY_PATH + try: + val_file = open(self.FAN_DUTY_PATH) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = val_file.readline().rstrip() + val_file.close() + + return int(content) + #self._get_fan_node_val(fan_num, self.FAN_NODE_DUTY_IDX_OF_MAP) +#static u32 reg_val_to_duty_cycle(u8 reg_val) +#{ +# reg_val &= FAN_DUTY_CYCLE_REG_MASK; +# return ((u32)(reg_val+1) * 625 + 75)/ 100; +#} +# + def set_fan_duty_cycle(self, val): + + try: + fan_file = open(self.FAN_DUTY_PATH, 'r+') + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + #val = ((val + 1 ) * 625 +75 ) / 100 + fan_file.write(str(val)) + fan_file.close() + return True + + #def get_fanr_fault(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FANR_NODE_FAULT_IDX_OF_MAP) + + def get_fanr_speed(self, fan_num): + return self._get_fan_node_val(fan_num, self.FANR_NODE_SPEED_IDX_OF_MAP) + + def get_fan_status(self, fan_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num, %d', fan_num) + return None + + if self.get_fan_fault(fan_num) is not None and self.get_fan_fault(fan_num) > 0: + logging.debug('GET. FAN fault. fan_num, %d', fan_num) + return False + + #if self.get_fanr_fault(fan_num) is not None and self.get_fanr_fault(fan_num) > 0: + # logging.debug('GET. FANR fault. fan_num, %d', fan_num) + # return False + + return True + +#def main(): +# fan = FanUtil() +# +# print 'get_size_node_map : %d' % fan.get_size_node_map() +# print 'get_size_path_map : %d' % fan.get_size_path_map() +# for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): +# for y in range(fan.get_idx_node_start(), fan.get_num_nodes()+1): +# print fan.get_fan_to_device_path(x, y) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/thermalutil.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/thermalutil.py new file mode 100755 index 000000000000..50d8c85d94ca --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/classes/thermalutil.py @@ -0,0 +1,123 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018:Jostar modify for as7716_32x +# ------------------------------------------------------------------ + +try: + import time + import logging + import glob + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class ThermalUtil(object): + """Platform-specific ThermalUtil class""" + + THERMAL_NUM_ON_MAIN_BROAD = 3 + THERMAL_NUM_1_IDX = 1 # 1_ON_MAIN_BROAD + THERMAL_NUM_2_IDX = 2 # 2_ON_MAIN_BROAD + THERMAL_NUM_3_IDX = 3 # 3_ON_MAIN_BROAD + + BASE_VAL_PATH = '/sys/bus/i2c/devices/{0}-00{1}/hwmon/hwmon*/temp1_input' + + """ Dictionary where + key1 = thermal id index (integer) starting from 1 + value = path to fan device file (string) """ + _thermal_to_device_path_mapping = {} + + _thermal_to_device_node_mapping = { + THERMAL_NUM_1_IDX: ['10', '48'], + THERMAL_NUM_2_IDX: ['10', '49'], + THERMAL_NUM_3_IDX: ['10', '4a'], + } + + def __init__(self): + thermal_path = self.BASE_VAL_PATH + + for x in range(self.THERMAL_NUM_1_IDX, self.THERMAL_NUM_ON_MAIN_BROAD+1): + self._thermal_to_device_path_mapping[x] = thermal_path.format( + self._thermal_to_device_node_mapping[x][0], + self._thermal_to_device_node_mapping[x][1]) + + def _get_thermal_node_val(self, thermal_num): + if thermal_num < self.THERMAL_NUM_1_IDX or thermal_num > self.THERMAL_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. thermal_num, %d', thermal_num) + return None + + device_path = self.get_thermal_to_device_path(thermal_num) + for filename in glob.glob(device_path): + try: + val_file = open(filename, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + + def get_num_thermals(self): + return self.THERMAL_NUM_ON_MAIN_BROAD + + def get_idx_thermal_start(self): + return self.THERMAL_NUM_1_IDX + + def get_size_node_map(self): + return len(self._thermal_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._thermal_to_device_path_mapping) + + def get_thermal_to_device_path(self, thermal_num): + return self._thermal_to_device_path_mapping[thermal_num] + + def get_thermal_1_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + + def get_thermal_2_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) + def get_thermal_temp(self): + return (self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) +self._get_thermal_node_val(self.THERMAL_NUM_3_IDX)) + +#def main(): +# thermal = ThermalUtil() +# +# print 'get_size_node_map : %d' % thermal.get_size_node_map() +# print 'get_size_path_map : %d' % thermal.get_size_path_map() +# for x in range(thermal.get_idx_thermal_start(), thermal.get_num_thermals()+1): +# print thermal.get_thermal_to_device_path(x) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/Makefile b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/Makefile new file mode 100755 index 000000000000..4c0942afb97e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/Makefile @@ -0,0 +1,21 @@ +ifneq ($(KERNELRELEASE),) +obj-m:= accton_as7716_32x_cpld1.o accton_as7716_32x_fan.o \ + accton_as7716_32x_leds.o accton_as7716_32x_psu.o cpr_4011_4mxx.o ym2651y.o \ + optoe.o accton_i2c_cpld.o + +else +ifeq (,$(KERNEL_SRC)) +#$(error KERNEL_SRC is not defined) +KVERSION := $(shell uname -r) +KERNEL_DIR = /usr/src/linux-headers-$(KVERSION)/ +KERNELDIR:=$(KERNEL_DIR) +#export KERNELDIR:=${PWD}/../../../../../src/sonic-linux-kernel/linux-3.16.43/ +else +KERNELDIR:=$(KERNEL_SRC) +endif +PWD:=$(shell pwd) +default: + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules +clean: + rm -rf *.o *.mod.o *.mod.o *.ko .*cmd .tmp_versions Module.markers Module.symvers modules.order +endif diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_cpld1.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_cpld1.c new file mode 100755 index 000000000000..cbab013f5860 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_cpld1.c @@ -0,0 +1,781 @@ +/* + * A hwmon driver for the as7716_32x_cpld + * + * Copyright (C) 2013 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ + +static ssize_t show_present(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t get_mode_reset(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); + +static int as7716_32x_cpld_read_internal(struct i2c_client *client, u8 reg); +static int as7716_32x_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value); + +struct as7716_32x_cpld_data { + struct device *hwmon_dev; + struct mutex update_lock; +}; + +/* Addresses scanned for as7716_32x_cpld + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +#define TRANSCEIVER_PRESENT_ATTR_ID(index) MODULE_PRESENT_##index +#define TRANSCEIVER_RESET_ATTR_ID(index) MODULE_RESET_##index + +enum as7716_32x_cpld_sysfs_attributes { + CPLD_VERSION, + ACCESS, + MODULE_PRESENT_ALL, + /* transceiver attributes */ + TRANSCEIVER_PRESENT_ATTR_ID(1), + TRANSCEIVER_PRESENT_ATTR_ID(2), + TRANSCEIVER_PRESENT_ATTR_ID(3), + TRANSCEIVER_PRESENT_ATTR_ID(4), + TRANSCEIVER_PRESENT_ATTR_ID(5), + TRANSCEIVER_PRESENT_ATTR_ID(6), + TRANSCEIVER_PRESENT_ATTR_ID(7), + TRANSCEIVER_PRESENT_ATTR_ID(8), + TRANSCEIVER_PRESENT_ATTR_ID(9), + TRANSCEIVER_PRESENT_ATTR_ID(10), + TRANSCEIVER_PRESENT_ATTR_ID(11), + TRANSCEIVER_PRESENT_ATTR_ID(12), + TRANSCEIVER_PRESENT_ATTR_ID(13), + TRANSCEIVER_PRESENT_ATTR_ID(14), + TRANSCEIVER_PRESENT_ATTR_ID(15), + TRANSCEIVER_PRESENT_ATTR_ID(16), + TRANSCEIVER_PRESENT_ATTR_ID(17), + TRANSCEIVER_PRESENT_ATTR_ID(18), + TRANSCEIVER_PRESENT_ATTR_ID(19), + TRANSCEIVER_PRESENT_ATTR_ID(20), + TRANSCEIVER_PRESENT_ATTR_ID(21), + TRANSCEIVER_PRESENT_ATTR_ID(22), + TRANSCEIVER_PRESENT_ATTR_ID(23), + TRANSCEIVER_PRESENT_ATTR_ID(24), + TRANSCEIVER_PRESENT_ATTR_ID(25), + TRANSCEIVER_PRESENT_ATTR_ID(26), + TRANSCEIVER_PRESENT_ATTR_ID(27), + TRANSCEIVER_PRESENT_ATTR_ID(28), + TRANSCEIVER_PRESENT_ATTR_ID(29), + TRANSCEIVER_PRESENT_ATTR_ID(30), + TRANSCEIVER_PRESENT_ATTR_ID(31), + TRANSCEIVER_PRESENT_ATTR_ID(32), + TRANSCEIVER_RESET_ATTR_ID(1), + TRANSCEIVER_RESET_ATTR_ID(2), + TRANSCEIVER_RESET_ATTR_ID(3), + TRANSCEIVER_RESET_ATTR_ID(4), + TRANSCEIVER_RESET_ATTR_ID(5), + TRANSCEIVER_RESET_ATTR_ID(6), + TRANSCEIVER_RESET_ATTR_ID(7), + TRANSCEIVER_RESET_ATTR_ID(8), + TRANSCEIVER_RESET_ATTR_ID(9), + TRANSCEIVER_RESET_ATTR_ID(10), + TRANSCEIVER_RESET_ATTR_ID(11), + TRANSCEIVER_RESET_ATTR_ID(12), + TRANSCEIVER_RESET_ATTR_ID(13), + TRANSCEIVER_RESET_ATTR_ID(14), + TRANSCEIVER_RESET_ATTR_ID(15), + TRANSCEIVER_RESET_ATTR_ID(16), + TRANSCEIVER_RESET_ATTR_ID(17), + TRANSCEIVER_RESET_ATTR_ID(18), + TRANSCEIVER_RESET_ATTR_ID(19), + TRANSCEIVER_RESET_ATTR_ID(20), + TRANSCEIVER_RESET_ATTR_ID(21), + TRANSCEIVER_RESET_ATTR_ID(22), + TRANSCEIVER_RESET_ATTR_ID(23), + TRANSCEIVER_RESET_ATTR_ID(24), + TRANSCEIVER_RESET_ATTR_ID(25), + TRANSCEIVER_RESET_ATTR_ID(26), + TRANSCEIVER_RESET_ATTR_ID(27), + TRANSCEIVER_RESET_ATTR_ID(28), + TRANSCEIVER_RESET_ATTR_ID(29), + TRANSCEIVER_RESET_ATTR_ID(30), + TRANSCEIVER_RESET_ATTR_ID(31), + TRANSCEIVER_RESET_ATTR_ID(32), +}; + +/* sysfs attributes for hwmon + */ + +/* transceiver attributes */ +/*present*/ +#define DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_present_##index, S_IRUGO, show_present, NULL, MODULE_PRESENT_##index) +#define DECLARE_TRANSCEIVER_ATTR(index) &sensor_dev_attr_module_present_##index.dev_attr.attr + +/*reset*/ +#define DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_reset_##index, S_IWUSR | S_IRUGO, get_mode_reset, set_mode_reset, MODULE_RESET_##index) +#define DECLARE_TRANSCEIVER_RESET_ATTR(index) &sensor_dev_attr_module_reset_##index.dev_attr.attr + +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(access, S_IWUSR, NULL, access, ACCESS); +/* transceiver attributes */ +static SENSOR_DEVICE_ATTR(module_present_all, S_IRUGO, show_present_all, NULL, MODULE_PRESENT_ALL); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(1); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(2); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(3); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(4); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(5); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(6); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(7); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(8); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(9); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(10); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(11); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(12); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(13); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(14); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(15); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(16); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(17); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(18); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(19); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(20); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(21); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(22); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(23); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(24); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(25); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(26); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(27); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(28); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(29); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(30); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(31); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(32); + +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(1); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(2); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(3); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(4); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(5); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(6); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(7); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(8); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(9); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(10); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(11); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(12); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(13); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(14); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(15); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(16); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(17); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(18); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(19); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(20); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(21); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(22); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(23); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(24); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(25); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(26); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(27); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(28); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(29); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(30); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(31); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(32); + + +static struct attribute *as7716_32x_cpld_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + /* transceiver attributes */ + &sensor_dev_attr_module_present_all.dev_attr.attr, + DECLARE_TRANSCEIVER_ATTR(1), + DECLARE_TRANSCEIVER_ATTR(2), + DECLARE_TRANSCEIVER_ATTR(3), + DECLARE_TRANSCEIVER_ATTR(4), + DECLARE_TRANSCEIVER_ATTR(5), + DECLARE_TRANSCEIVER_ATTR(6), + DECLARE_TRANSCEIVER_ATTR(7), + DECLARE_TRANSCEIVER_ATTR(8), + DECLARE_TRANSCEIVER_ATTR(9), + DECLARE_TRANSCEIVER_ATTR(10), + DECLARE_TRANSCEIVER_ATTR(11), + DECLARE_TRANSCEIVER_ATTR(12), + DECLARE_TRANSCEIVER_ATTR(13), + DECLARE_TRANSCEIVER_ATTR(14), + DECLARE_TRANSCEIVER_ATTR(15), + DECLARE_TRANSCEIVER_ATTR(16), + DECLARE_TRANSCEIVER_ATTR(17), + DECLARE_TRANSCEIVER_ATTR(18), + DECLARE_TRANSCEIVER_ATTR(19), + DECLARE_TRANSCEIVER_ATTR(20), + DECLARE_TRANSCEIVER_ATTR(21), + DECLARE_TRANSCEIVER_ATTR(22), + DECLARE_TRANSCEIVER_ATTR(23), + DECLARE_TRANSCEIVER_ATTR(24), + DECLARE_TRANSCEIVER_ATTR(25), + DECLARE_TRANSCEIVER_ATTR(26), + DECLARE_TRANSCEIVER_ATTR(27), + DECLARE_TRANSCEIVER_ATTR(28), + DECLARE_TRANSCEIVER_ATTR(29), + DECLARE_TRANSCEIVER_ATTR(30), + DECLARE_TRANSCEIVER_ATTR(31), + DECLARE_TRANSCEIVER_ATTR(32), + DECLARE_TRANSCEIVER_RESET_ATTR(1), + DECLARE_TRANSCEIVER_RESET_ATTR(2), + DECLARE_TRANSCEIVER_RESET_ATTR(3), + DECLARE_TRANSCEIVER_RESET_ATTR(4), + DECLARE_TRANSCEIVER_RESET_ATTR(5), + DECLARE_TRANSCEIVER_RESET_ATTR(6), + DECLARE_TRANSCEIVER_RESET_ATTR(7), + DECLARE_TRANSCEIVER_RESET_ATTR(8), + DECLARE_TRANSCEIVER_RESET_ATTR(9), + DECLARE_TRANSCEIVER_RESET_ATTR(10), + DECLARE_TRANSCEIVER_RESET_ATTR(11), + DECLARE_TRANSCEIVER_RESET_ATTR(12), + DECLARE_TRANSCEIVER_RESET_ATTR(13), + DECLARE_TRANSCEIVER_RESET_ATTR(14), + DECLARE_TRANSCEIVER_RESET_ATTR(15), + DECLARE_TRANSCEIVER_RESET_ATTR(16), + DECLARE_TRANSCEIVER_RESET_ATTR(17), + DECLARE_TRANSCEIVER_RESET_ATTR(18), + DECLARE_TRANSCEIVER_RESET_ATTR(19), + DECLARE_TRANSCEIVER_RESET_ATTR(20), + DECLARE_TRANSCEIVER_RESET_ATTR(21), + DECLARE_TRANSCEIVER_RESET_ATTR(22), + DECLARE_TRANSCEIVER_RESET_ATTR(23), + DECLARE_TRANSCEIVER_RESET_ATTR(24), + DECLARE_TRANSCEIVER_RESET_ATTR(25), + DECLARE_TRANSCEIVER_RESET_ATTR(26), + DECLARE_TRANSCEIVER_RESET_ATTR(27), + DECLARE_TRANSCEIVER_RESET_ATTR(28), + DECLARE_TRANSCEIVER_RESET_ATTR(29), + DECLARE_TRANSCEIVER_RESET_ATTR(30), + DECLARE_TRANSCEIVER_RESET_ATTR(31), + DECLARE_TRANSCEIVER_RESET_ATTR(32), + NULL +}; + +static const struct attribute_group as7716_32x_cpld_group = { + .attrs = as7716_32x_cpld_attributes, +}; + +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf) +{ + int i, status; + u8 values[4] = {0}; + u8 regs[] = {0x30, 0x31, 0x32, 0x33}; + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = as7716_32x_cpld_read_internal(client, regs[i]); + + if (status < 0) { + goto exit; + } + + values[i] = ~(u8)status; + } + + mutex_unlock(&data->update_lock); + + /* Return values 1 -> 32 in order */ + return sprintf(buf, "%.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], + values[3]); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_present(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0; + + switch (attr->index) { + case MODULE_PRESENT_1 ... MODULE_PRESENT_8: + reg = 0x30; + mask = 0x1 << (attr->index - MODULE_PRESENT_1); + break; + case MODULE_PRESENT_9 ... MODULE_PRESENT_16: + reg = 0x31; + mask = 0x1 << (attr->index - MODULE_PRESENT_9); + break; + case MODULE_PRESENT_17 ... MODULE_PRESENT_24: + reg = 0x32; + mask = 0x1 << (attr->index - MODULE_PRESENT_17); + break; + case MODULE_PRESENT_25 ... MODULE_PRESENT_32: + reg = 0x33; + mask = 0x1 << (attr->index - MODULE_PRESENT_25); + break; + default: + return 0; + } + + + mutex_lock(&data->update_lock); + status = as7716_32x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", !(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf) +{ + u8 reg = 0, mask = 0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + + switch (attr->index) { + case CPLD_VERSION: + reg = 0x1; + mask = 0xFF; + break; + default: + break; + } + + mutex_lock(&data->update_lock); + status = as7716_32x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return sprintf(buf, "%d\n", (status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int status; + u32 addr, val; + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_cpld_data *data = i2c_get_clientdata(client); + + if (sscanf(buf, "0x%x 0x%x", &addr, &val) != 2) { + return -EINVAL; + } + + if (addr > 0xFF || val > 0xFF) { + return -EINVAL; + } + + mutex_lock(&data->update_lock); + status = as7716_32x_cpld_write_internal(client, addr, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static int as7716_32x_cpld_read_internal(struct i2c_client *client, u8 reg) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, reg); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static int as7716_32x_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, reg, value); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static void as7716_32x_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void as7716_32x_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static int as7716_32x_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + struct as7716_32x_cpld_data *data = NULL; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&client->dev, "i2c_check_functionality failed (0x%x)\n", client->addr); + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7716_32x_cpld_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32x_cpld_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + as7716_32x_cpld_add_client(client); + + dev_info(&client->dev, "%s: cpld '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32x_cpld_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32x_cpld_remove(struct i2c_client *client) +{ + struct as7716_32x_cpld_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32x_cpld_group); + kfree(data); + as7716_32x_cpld_remove_client(client); + + return 0; +} + +int as7716_32x_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_read_byte_data(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as7716_32x_cpld_read); + +int as7716_32x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_write_byte_data(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as7716_32x_cpld_write); + +static ssize_t get_mode_reset(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0; + + switch (attr->index) { + case MODULE_RESET_1 ... MODULE_RESET_8: + reg = 0x04; + mask = 0x1 << (attr->index - MODULE_RESET_1); + break; + case MODULE_RESET_9 ... MODULE_RESET_16: + reg = 0x05; + mask = 0x1 << (attr->index - MODULE_RESET_9); + break; + case MODULE_RESET_17 ... MODULE_RESET_24: + reg = 0x06; + mask = 0x1 << (attr->index - MODULE_RESET_17); + break; + case MODULE_RESET_25 ... MODULE_RESET_32: + reg = 0x07; + mask = 0x1 << (attr->index - MODULE_RESET_25); + break; + default: + return 0; + } + + + mutex_lock(&data->update_lock); + status = as7716_32x_cpld_read_internal(client, reg); + + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\r\n", !(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_cpld_data *data = i2c_get_clientdata(client); + long reset; + int status=0, val, error; + u8 reg = 0, mask = 0; + + + error = kstrtol(buf, 10, &reset); + if (error) { + return error; + } + + switch (attr->index) { + case MODULE_RESET_1 ... MODULE_RESET_8: + reg = 0x04; + mask = 0x1 << (attr->index - MODULE_RESET_1); + break; + case MODULE_RESET_9 ... MODULE_RESET_16: + reg = 0x05; + mask = 0x1 << (attr->index - MODULE_RESET_9); + break; + case MODULE_RESET_17 ... MODULE_RESET_24: + reg = 0x06; + mask = 0x1 << (attr->index - MODULE_RESET_17); + break; + case MODULE_RESET_25 ... MODULE_RESET_32: + reg = 0x07; + mask = 0x1 << (attr->index - MODULE_RESET_25); + break; + default: + return 0; + } + mutex_lock(&data->update_lock); + + status = as7716_32x_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + + /* Update lp_mode status */ + if (reset) + { + val = status&(~mask); + } + else + { + val =status | (mask); + } + + status = as7716_32x_cpld_write_internal(client, reg, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + + + +static const struct i2c_device_id as7716_32x_cpld_id[] = { + { "as7716_32x_cpld1", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32x_cpld_id); + +static struct i2c_driver as7716_32x_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32x_cpld1", + }, + .probe = as7716_32x_cpld_probe, + .remove = as7716_32x_cpld_remove, + .id_table = as7716_32x_cpld_id, + .address_list = normal_i2c, +}; + +static int __init as7716_32x_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&as7716_32x_cpld_driver); +} + +static void __exit as7716_32x_cpld_exit(void) +{ + i2c_del_driver(&as7716_32x_cpld_driver); +} + +module_init(as7716_32x_cpld_init); +module_exit(as7716_32x_cpld_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7716_32x_cpld driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_fan.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_fan.c new file mode 100755 index 000000000000..83b7bceeb99e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_fan.c @@ -0,0 +1,794 @@ +/* + * A hwmon driver for the Accton as7716 32x fan + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "as7716_32x_fan" + +#define NUM_THERMAL_SENSORS (3) /* Get sum of this number of sensors.*/ +#define THERMAL_SENSORS_DRIVER "lm75" + +#define IN +#define OUT + +static struct as7716_32x_fan_data *as7716_32x_fan_update_device(struct device *dev); +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_enable(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, char *buf); +extern int as7716_32x_cpld_read(unsigned short cpld_addr, u8 reg); +extern int as7716_32x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +/* fan related data, the index should match sysfs_fan_attributes + */ +static const u8 fan_reg[] = { + 0x0F, /* fan 1-6 present status */ + 0x10, /* fan 1-6 direction(0:B2F 1:F2B) */ + 0x11, /* fan PWM(for all fan) */ + 0x12, /* front fan 1 speed(rpm) */ + 0x13, /* front fan 2 speed(rpm) */ + 0x14, /* front fan 3 speed(rpm) */ + 0x15, /* front fan 4 speed(rpm) */ + 0x16, /* front fan 5 speed(rpm) */ + 0x17, /* front fan 6 speed(rpm) */ + 0x22, /* rear fan 1 speed(rpm) */ + 0x23, /* rear fan 2 speed(rpm) */ + 0x24, /* rear fan 3 speed(rpm) */ + 0x25, /* rear fan 4 speed(rpm) */ + 0x26, /* rear fan 5 speed(rpm) */ + 0x27, /* rear fan 6 speed(rpm) */ +}; + +/* Each client has this additional data */ +struct as7716_32x_fan_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[ARRAY_SIZE(fan_reg)]; /* Register value */ + u8 enable; + int system_temp; /*In unit of mini-Celsius*/ + int sensors_found; +}; + +enum fan_id { + FAN1_ID, + FAN2_ID, + FAN3_ID, + FAN4_ID, + FAN5_ID, + FAN6_ID +}; + +enum sysfs_fan_attributes { + FAN_PRESENT_REG, + FAN_DIRECTION_REG, + FAN_DUTY_CYCLE_PERCENTAGE, /* Only one CPLD register to control duty cycle for all fans */ + FAN1_FRONT_SPEED_RPM, + FAN2_FRONT_SPEED_RPM, + FAN3_FRONT_SPEED_RPM, + FAN4_FRONT_SPEED_RPM, + FAN5_FRONT_SPEED_RPM, + FAN6_FRONT_SPEED_RPM, + FAN1_REAR_SPEED_RPM, + FAN2_REAR_SPEED_RPM, + FAN3_REAR_SPEED_RPM, + FAN4_REAR_SPEED_RPM, + FAN5_REAR_SPEED_RPM, + FAN6_REAR_SPEED_RPM, + FAN1_DIRECTION, + FAN2_DIRECTION, + FAN3_DIRECTION, + FAN4_DIRECTION, + FAN5_DIRECTION, + FAN6_DIRECTION, + FAN1_PRESENT, + FAN2_PRESENT, + FAN3_PRESENT, + FAN4_PRESENT, + FAN5_PRESENT, + FAN6_PRESENT, + FAN1_FAULT, + FAN2_FAULT, + FAN3_FAULT, + FAN4_FAULT, + FAN5_FAULT, + FAN6_FAULT +}; + +/* Define attributes + */ +#define DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT);\ + static SENSOR_DEVICE_ATTR(fan##index2##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT) +#define DECLARE_FAN_FAULT_ATTR(index, index2) &sensor_dev_attr_fan##index##_fault.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_fault.dev_attr.attr + +#define DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_direction, S_IRUGO, fan_show_value, NULL, FAN##index##_DIRECTION) +#define DECLARE_FAN_DIRECTION_ATTR(index) &sensor_dev_attr_fan##index##_direction.dev_attr.attr + +#define DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index##_enable, S_IWUSR | S_IRUGO, get_enable, set_enable, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_DUTY_CYCLE_ATTR(index) &sensor_dev_attr_fan_duty_cycle_percentage.dev_attr.attr, \ + &sensor_dev_attr_pwm##index.dev_attr.attr, \ + &sensor_dev_attr_pwm##index##_enable.dev_attr.attr + +#define DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR() \ + static SENSOR_DEVICE_ATTR(sys_temp, S_IRUGO, get_sys_temp, NULL, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_SYSTEM_TEMP_ATTR() &sensor_dev_attr_sys_temp.dev_attr.attr + + +#define DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_present, S_IRUGO, fan_show_value, NULL, FAN##index##_PRESENT) +#define DECLARE_FAN_PRESENT_ATTR(index) &sensor_dev_attr_fan##index##_present.dev_attr.attr + +#define DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_front_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_rear_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index2##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM) +#define DECLARE_FAN_SPEED_RPM_ATTR(index, index2) &sensor_dev_attr_fan##index##_front_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_rear_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_input.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_input.dev_attr.attr + +/* 6 fan fault attributes in this platform */ +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(6,16); +/* 6 fan speed(rpm) attributes in this platform */ +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(6,16); +/* 6 fan present attributes in this platform */ +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(1); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(2); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(3); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(4); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(5); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(6); + +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(1); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(2); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(3); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(4); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(5); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(6); + +/* 1 fan duty cycle attribute in this platform */ +DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(1); +/* System temperature for fancontrol */ +DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR(); + +static struct attribute *as7716_32x_fan_attributes[] = { + /* fan related attributes */ + DECLARE_FAN_FAULT_ATTR(1,11), + DECLARE_FAN_FAULT_ATTR(2,12), + DECLARE_FAN_FAULT_ATTR(3,13), + DECLARE_FAN_FAULT_ATTR(4,14), + DECLARE_FAN_FAULT_ATTR(5,15), + DECLARE_FAN_FAULT_ATTR(6,16), + DECLARE_FAN_SPEED_RPM_ATTR(1,11), + DECLARE_FAN_SPEED_RPM_ATTR(2,12), + DECLARE_FAN_SPEED_RPM_ATTR(3,13), + DECLARE_FAN_SPEED_RPM_ATTR(4,14), + DECLARE_FAN_SPEED_RPM_ATTR(5,15), + DECLARE_FAN_SPEED_RPM_ATTR(6,16), + DECLARE_FAN_PRESENT_ATTR(1), + DECLARE_FAN_PRESENT_ATTR(2), + DECLARE_FAN_PRESENT_ATTR(3), + DECLARE_FAN_PRESENT_ATTR(4), + DECLARE_FAN_PRESENT_ATTR(5), + DECLARE_FAN_PRESENT_ATTR(6), + DECLARE_FAN_DIRECTION_ATTR(1), + DECLARE_FAN_DIRECTION_ATTR(2), + DECLARE_FAN_DIRECTION_ATTR(3), + DECLARE_FAN_DIRECTION_ATTR(4), + DECLARE_FAN_DIRECTION_ATTR(5), + DECLARE_FAN_DIRECTION_ATTR(6), + DECLARE_FAN_DUTY_CYCLE_ATTR(1), + DECLARE_FAN_SYSTEM_TEMP_ATTR(), + NULL +}; + +#define FAN_DUTY_CYCLE_REG_MASK 0xF +#define FAN_MAX_DUTY_CYCLE 100 +#define FAN_REG_VAL_TO_SPEED_RPM_STEP 100 + +static int as7716_32x_fan_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int as7716_32x_fan_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* fan utility functions + */ +static u32 reg_val_to_duty_cycle(u8 reg_val) +{ + reg_val &= FAN_DUTY_CYCLE_REG_MASK; + return ((u32)(reg_val+1) * 625 + 75)/ 100; +} + +static u8 duty_cycle_to_reg_val(u8 duty_cycle) +{ + return ((u32)duty_cycle * 100 / 625) - 1; +} + +static u32 reg_val_to_speed_rpm(u8 reg_val) +{ + return (u32)reg_val * FAN_REG_VAL_TO_SPEED_RPM_STEP; +} + +static u8 reg_val_to_direction(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 1 : 0; +} +static u8 reg_val_to_is_present(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 0 : 1; +} + +static u8 is_fan_fault(struct as7716_32x_fan_data *data, enum fan_id id) +{ + u8 ret = 1; + int front_fan_index = FAN1_FRONT_SPEED_RPM + id; + int rear_fan_index = FAN1_REAR_SPEED_RPM + id; + + /* Check if the speed of front or rear fan is ZERO, + */ + if (reg_val_to_speed_rpm(data->reg_val[front_fan_index]) && + reg_val_to_speed_rpm(data->reg_val[rear_fan_index])) { + ret = 0; + } + + return ret; +} + +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct as7716_32x_fan_data *data = as7716_32x_fan_update_device(dev); + int error, value; + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > 1) + return -EINVAL; + + data->enable = value; + if (value == 0) + { + return set_duty_cycle(dev, da, buf, FAN_MAX_DUTY_CYCLE); + } + return count; +} + + +static ssize_t get_enable(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7716_32x_fan_data *data = as7716_32x_fan_update_device(dev); + + return sprintf(buf, "%u\n", data->enable); +} +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int error, value; + struct i2c_client *client = to_i2c_client(dev); + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > FAN_MAX_DUTY_CYCLE) + return -EINVAL; + + as7716_32x_fan_write_value(client, 0x33, 0); /* Disable fan speed watch dog */ + as7716_32x_fan_write_value(client, fan_reg[FAN_DUTY_CYCLE_PERCENTAGE], duty_cycle_to_reg_val(value)); + return count; +} + +/* Due to this struct is declared at lm75.c, it cannot be include + * under Sonic environment. I duplicate it from lm75.c. + */ +struct lm75_data { + struct i2c_client *client; + struct device *hwmon_dev; + struct thermal_zone_device *tz; + struct mutex update_lock; + u8 orig_conf; + u8 resolution; /* In bits, between 9 and 12 */ + u8 resolution_limits; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + unsigned long sample_time; /* In jiffies */ + s16 temp[3]; /* Register values, + 0 = input + 1 = max + 2 = hyst */ +}; + +/*Copied from lm75.c*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + +/*Get hwmon_dev from i2c_client, set hwmon_dev = NULL is failed.*/ +static struct device * get_hwmon_dev( + struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if(data) + { + if( data->valid == 1 && data->hwmon_dev) + { + return data->hwmon_dev; + } + + } + return NULL; +} + +/* To find hwmon index by opening hwmon under that i2c address. + */ +static int find_hwmon_index_by_FileOpen( + int bus_nr, + unsigned short addr, + OUT int *index) +{ +#define MAX_HWMON_DEVICE (10) /* Find hwmon device in 0~10*/ + struct file *sfd; + char client_name[96]; + int i=0; + + do { + snprintf(client_name, sizeof(client_name), + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + + sfd = filp_open(client_name, O_RDONLY, 0); + i++; + } while( IS_ERR(sfd) && i < MAX_HWMON_DEVICE); + + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", client_name, __LINE__); + return -ENOENT; + } + filp_close(sfd, 0); + *index = i - 1; + return 0; + +#undef MAX_HWMON_DEVICE +} + +static int get_temp_file_path( + int bus_nr, unsigned short addr, + struct device *hwmon_dev + ,char *path, int max_len) +{ + + if(hwmon_dev && strlen(dev_name(hwmon_dev))) + { + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/%s/temp1_input", + bus_nr, addr, dev_name(hwmon_dev)); + } + else + { + int i=0; + if(find_hwmon_index_by_FileOpen( bus_nr, addr, &i)) + { + return -EIO; + } + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + } + return 0; +} + +/*File read the dev file at user space.*/ +static int read_devfile_temp1_input( + struct device *dev, + int bus_nr, + unsigned short addr, + struct device *hwmon_dev, + int *miniCelsius) +{ + struct file *sfd; + char buffer[96]; + char devfile[96]; + int rc, status; + int rdlen, value; + mm_segment_t old_fs; + + rc = 0; + get_temp_file_path(bus_nr, addr, hwmon_dev, devfile, sizeof(devfile)); + sfd = filp_open(devfile, O_RDONLY, 0); + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", devfile, __LINE__); + return -ENOENT; + } + dev_dbg(dev, "Found device:%s\n",devfile); + + if(!(sfd->f_op) || !(sfd->f_op->read) ) { + pr_err("file %s cann't readable ?\n",devfile); + return -ENOENT; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + rdlen = sfd->f_op->read(sfd, buffer, sizeof(buffer), &sfd->f_pos); + if (rdlen == 0) { + pr_err( "File(%s) empty!\n", devfile); + rc = -EIO; + goto exit; + } + status = sscanf(buffer, "%d", &value); + if (status != 1) { + rc = -EIO; + goto exit; + } + *miniCelsius = value; + dev_dbg(dev,"found sensors: %d @i2c %d-%04x\n", value, bus_nr, addr); + +exit: + set_fs(old_fs); + filp_close(sfd, 0); + return rc; +} + +static u8 is_lm75_data_due(struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if (time_after(jiffies, data->last_updated + data->sample_time)) + { + return 1; + } + return 0; +} +static int get_lm75_temp(struct i2c_client *client, int *miniCelsius) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + *miniCelsius = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + +static int _find_lm75_device(struct device *dev, void *data) +{ + struct device_driver *driver; + struct as7716_32x_fan_data *prv = data; + char *driver_name = THERMAL_SENSORS_DRIVER; + + driver = dev->driver; + if (driver && driver->name && + strcmp(driver->name, driver_name) == 0) + { + struct i2c_client *client; + client = to_i2c_client(dev); + if (client) + { + /*cannot use "struct i2c_adapter *adap = to_i2c_adapter(dev);"*/ + struct i2c_adapter *adap = client->adapter; + int miniCelsius = 0; + + + if (!adap) { + return -ENXIO; + } + + /* If the data is not updated, read them from devfile + to drive them updateing data from chip.*/ + if (is_lm75_data_due(client)) + { + struct device *hwmon_dev; + + hwmon_dev = get_hwmon_dev(client); + if(0 == read_devfile_temp1_input(dev, adap->nr, + client->addr, hwmon_dev, &miniCelsius)) + { + prv->system_temp += miniCelsius; + prv->sensors_found++; + } + + } + else + { + get_lm75_temp(client, &miniCelsius); + prv->system_temp += miniCelsius; + prv->sensors_found++; + + } + } + } + return 0; +} + +/*Find all lm75 devices and return sum of temperatures.*/ +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + ssize_t ret = 0; + struct as7716_32x_fan_data *data = as7716_32x_fan_update_device(dev); + + data->system_temp=0; + data->sensors_found=0; + i2c_for_each_dev(data, _find_lm75_device); + if (NUM_THERMAL_SENSORS != data->sensors_found) + { + dev_dbg(dev,"only %d of %d temps are found\n", + data->sensors_found, NUM_THERMAL_SENSORS); + data->system_temp = 0; + } + ret = sprintf(buf, "%d\n",data->system_temp); + return ret; +} +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7716_32x_fan_data *data = as7716_32x_fan_update_device(dev); + ssize_t ret = 0; + + if (data->valid) { + switch (attr->index) { + case FAN_DUTY_CYCLE_PERCENTAGE: + { + u32 duty_cycle = reg_val_to_duty_cycle(data->reg_val[FAN_DUTY_CYCLE_PERCENTAGE]); + ret = sprintf(buf, "%u\n", duty_cycle); + break; + } + case FAN1_FRONT_SPEED_RPM: + case FAN2_FRONT_SPEED_RPM: + case FAN3_FRONT_SPEED_RPM: + case FAN4_FRONT_SPEED_RPM: + case FAN5_FRONT_SPEED_RPM: + case FAN6_FRONT_SPEED_RPM: + case FAN1_REAR_SPEED_RPM: + case FAN2_REAR_SPEED_RPM: + case FAN3_REAR_SPEED_RPM: + case FAN4_REAR_SPEED_RPM: + case FAN5_REAR_SPEED_RPM: + case FAN6_REAR_SPEED_RPM: + ret = sprintf(buf, "%u\n", reg_val_to_speed_rpm(data->reg_val[attr->index])); + break; + case FAN1_PRESENT: + case FAN2_PRESENT: + case FAN3_PRESENT: + case FAN4_PRESENT: + case FAN5_PRESENT: + case FAN6_PRESENT: + ret = sprintf(buf, "%d\n", + reg_val_to_is_present(data->reg_val[FAN_PRESENT_REG], + attr->index - FAN1_PRESENT)); + break; + case FAN1_FAULT: + case FAN2_FAULT: + case FAN3_FAULT: + case FAN4_FAULT: + case FAN5_FAULT: + case FAN6_FAULT: + ret = sprintf(buf, "%d\n", is_fan_fault(data, attr->index - FAN1_FAULT)); + break; + case FAN1_DIRECTION: + case FAN2_DIRECTION: + case FAN3_DIRECTION: + case FAN4_DIRECTION: + case FAN5_DIRECTION: + case FAN6_DIRECTION: + ret = sprintf(buf, "%d\n", + reg_val_to_direction(data->reg_val[FAN_DIRECTION_REG], + attr->index - FAN1_DIRECTION)); + break; + default: + break; + } + } + + return ret; +} + +static const struct attribute_group as7716_32x_fan_group = { + .attrs = as7716_32x_fan_attributes, +}; + +static struct as7716_32x_fan_data *as7716_32x_fan_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_fan_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || + !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting as7716_32x_fan update\n"); + data->valid = 0; + + /* Update fan data + */ + for (i = 0; i < ARRAY_SIZE(data->reg_val); i++) { + int status = as7716_32x_fan_read_value(client, fan_reg[i]); + + if (status < 0) { + data->valid = 0; + mutex_unlock(&data->update_lock); + dev_dbg(&client->dev, "reg %d, err %d\n", fan_reg[i], status); + return data; + } + else { + data->reg_val[i] = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int as7716_32x_fan_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32x_fan_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7716_32x_fan_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32x_fan_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: fan '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32x_fan_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32x_fan_remove(struct i2c_client *client) +{ + struct as7716_32x_fan_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32x_fan_group); + + return 0; +} + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x66, I2C_CLIENT_END }; + +static const struct i2c_device_id as7716_32x_fan_id[] = { + { "as7716_32x_fan", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32x_fan_id); + +static struct i2c_driver as7716_32x_fan_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = DRVNAME, + }, + .probe = as7716_32x_fan_probe, + .remove = as7716_32x_fan_remove, + .id_table = as7716_32x_fan_id, + .address_list = normal_i2c, +}; + +static int __init as7716_32x_fan_init(void) +{ + return i2c_add_driver(&as7716_32x_fan_driver); +} + +static void __exit as7716_32x_fan_exit(void) +{ + i2c_del_driver(&as7716_32x_fan_driver); +} + +module_init(as7716_32x_fan_init); +module_exit(as7716_32x_fan_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7716_32x_fan driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_leds.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_leds.c new file mode 100755 index 000000000000..da3d9442035f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_leds.c @@ -0,0 +1,442 @@ +/* + * A LED driver for the as7716_32x_led + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +extern int as7716_32x_cpld_read (unsigned short cpld_addr, u8 reg); +extern int as7716_32x_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +extern void led_classdev_unregister(struct led_classdev *led_cdev); +extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); +extern void led_classdev_resume(struct led_classdev *led_cdev); +extern void led_classdev_suspend(struct led_classdev *led_cdev); + +#define DRVNAME "as7716_32x_led" + +struct as7716_32x_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[1]; /* only 1 register*/ +}; + +static struct as7716_32x_led_data *ledctl = NULL; + +/* LED related data + */ + +#define LED_CNTRLER_I2C_ADDRESS (0x60) + +#define LED_TYPE_DIAG_REG_MASK (0x3) +#define LED_MODE_DIAG_GREEN_VALUE (0x02) +#define LED_MODE_DIAG_RED_VALUE (0x01) +#define LED_MODE_DIAG_AMBER_VALUE (0x00) /*It's yellow actually. Green+Red=Yellow*/ +#define LED_MODE_DIAG_OFF_VALUE (0x03) + + +#define LED_TYPE_LOC_REG_MASK (0x80) +#define LED_MODE_LOC_ON_VALUE (0) +#define LED_MODE_LOC_OFF_VALUE (0x80) + +enum led_type { + LED_TYPE_DIAG, + LED_TYPE_LOC, + LED_TYPE_FAN, + LED_TYPE_PSU1, + LED_TYPE_PSU2 +}; + +struct led_reg { + u32 types; + u8 reg_addr; +}; + +static const struct led_reg led_reg_map[] = { + {(1<update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting as7716_32x_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = as7716_32x_led_read_value(led_reg_map[i].reg_addr); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg_map[i].reg_addr, status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void as7716_32x_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + enum led_type type) +{ + int reg_val; + u8 reg ; + mutex_lock(&ledctl->update_lock); + + if( !getLedReg(type, ®)) + { + dev_dbg(&ledctl->pdev->dev, "Not match item for %d.\n", type); + } + + reg_val = as7716_32x_led_read_value(reg); + + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + as7716_32x_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + + +static void as7716_32x_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + as7716_32x_led_set(led_cdev, led_light_mode, LED_TYPE_DIAG); +} + +static enum led_brightness as7716_32x_led_diag_get(struct led_classdev *cdev) +{ + as7716_32x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void as7716_32x_led_loc_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + as7716_32x_led_set(led_cdev, led_light_mode, LED_TYPE_LOC); +} + +static enum led_brightness as7716_32x_led_loc_get(struct led_classdev *cdev) +{ + as7716_32x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_LOC, ledctl->reg_val[0]); +} + +static void as7716_32x_led_auto_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ +} + +static enum led_brightness as7716_32x_led_auto_get(struct led_classdev *cdev) +{ + return LED_MODE_AUTO; +} + +static struct led_classdev as7716_32x_leds[] = { + [LED_TYPE_DIAG] = { + .name = "as7716_32x_led::diag", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_diag_set, + .brightness_get = as7716_32x_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_RED, + }, + [LED_TYPE_LOC] = { + .name = "as7716_32x_led::loc", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_loc_set, + .brightness_get = as7716_32x_led_loc_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_BLUE, + }, + [LED_TYPE_FAN] = { + .name = "as7716_32x_led::fan", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_auto_set, + .brightness_get = as7716_32x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU1] = { + .name = "as7716_32x_led::psu1", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_auto_set, + .brightness_get = as7716_32x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU2] = { + .name = "as7716_32x_led::psu2", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_auto_set, + .brightness_get = as7716_32x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, +}; + +static int as7716_32x_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(as7716_32x_leds); i++) { + led_classdev_suspend(&as7716_32x_leds[i]); + } + + return 0; +} + +static int as7716_32x_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(as7716_32x_leds); i++) { + led_classdev_resume(&as7716_32x_leds[i]); + } + + return 0; +} + +static int as7716_32x_led_probe(struct platform_device *pdev) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(as7716_32x_leds); i++) { + ret = led_classdev_register(&pdev->dev, &as7716_32x_leds[i]); + + if (ret < 0) + { + break; + } + } + + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(as7716_32x_leds)){ + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&as7716_32x_leds[i]); + } + } + + return 0; +} + +static int as7716_32x_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(as7716_32x_leds); i++) { + led_classdev_unregister(&as7716_32x_leds[i]); + } + + return 0; +} + +static struct platform_driver as7716_32x_led_driver = { + .probe = as7716_32x_led_probe, + .remove = as7716_32x_led_remove, + .suspend = as7716_32x_led_suspend, + .resume = as7716_32x_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init as7716_32x_led_init(void) +{ + int ret; + + + ret = platform_driver_register(&as7716_32x_led_driver); + if (ret < 0) { + + goto exit; + } + + ledctl = kzalloc(sizeof(struct as7716_32x_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&as7716_32x_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&as7716_32x_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return 0; +} + +static void __exit as7716_32x_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&as7716_32x_led_driver); + kfree(ledctl); +} + +module_init(as7716_32x_led_init); +module_exit(as7716_32x_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7716_32x_led driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_psu.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_psu.c new file mode 100755 index 000000000000..78a58b820b2a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_psu.c @@ -0,0 +1,381 @@ +/* + * An hwmon driver for accton as7716_32x Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_MODEL_NAME 16 + +#define DC12V_FAN_DIR_OFFSET 0x34 +#define DC12V_FAN_DIR_LEN 3 + +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_string(struct device *dev, struct device_attribute *da, char *buf); +static int as7716_32x_psu_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int as7716_32x_cpld_read (unsigned short cpld_addr, u8 reg); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7716_32x_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ + char model_name[MAX_MODEL_NAME+1]; /* Model name, read from eeprom */ + char fan_dir[DC12V_FAN_DIR_LEN+1]; /* DC12V fan direction */ +}; + +static struct as7716_32x_psu_data *as7716_32x_psu_update_device(struct device *dev); + +enum as7716_32x_psu_sysfs_attributes { + PSU_PRESENT, + PSU_MODEL_NAME, + PSU_POWER_GOOD, + PSU_FAN_DIR /* For DC12V only */ +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_present, S_IRUGO, show_status, NULL, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_model_name, S_IRUGO, show_string, NULL, PSU_MODEL_NAME); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_status, NULL, PSU_POWER_GOOD); +static SENSOR_DEVICE_ATTR(psu_fan_dir, S_IRUGO, show_string, NULL, PSU_FAN_DIR); + +static struct attribute *as7716_32x_psu_attributes[] = { + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_model_name.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + &sensor_dev_attr_psu_fan_dir.dev_attr.attr, + NULL +}; + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7716_32x_psu_data *data = as7716_32x_psu_update_device(dev); + u8 status = 0; + + if (!data->valid) { + return -EIO; + } + + if (attr->index == PSU_PRESENT) { + status = !(data->status >> (1-data->index) & 0x1); + } + else { /* PSU_POWER_GOOD */ + status = (data->status >> (3-data->index) & 0x1); + } + + return sprintf(buf, "%d\n", status); +} + +static ssize_t show_string(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7716_32x_psu_data *data = as7716_32x_psu_update_device(dev); + char *ptr = NULL; + + if (!data->valid) { + return -EIO; + } + + if (attr->index == PSU_MODEL_NAME) { + ptr = data->model_name; + } + else { /* PSU_FAN_DIR */ + ptr = data->fan_dir; + } + + return sprintf(buf, "%s\n", ptr); +} + +static const struct attribute_group as7716_32x_psu_group = { + .attrs = as7716_32x_psu_attributes, +}; + +static int as7716_32x_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32x_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7716_32x_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32x_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32x_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32x_psu_remove(struct i2c_client *client) +{ + struct as7716_32x_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32x_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as7716_32x_psu1, + as7716_32x_psu2 +}; + +static const struct i2c_device_id as7716_32x_psu_id[] = { + { "as7716_32x_psu1", as7716_32x_psu1 }, + { "as7716_32x_psu2", as7716_32x_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32x_psu_id); + +static struct i2c_driver as7716_32x_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32x_psu", + }, + .probe = as7716_32x_psu_probe, + .remove = as7716_32x_psu_remove, + .id_table = as7716_32x_psu_id, + .address_list = normal_i2c, +}; + +static int as7716_32x_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = 0; + int retry_count = 5; + + while (retry_count) { + retry_count--; + + result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) { + msleep(10); + continue; + } + + if (unlikely(result != data_len)) { + result = -EIO; + msleep(10); + continue; + } + + result = 0; + break; + } + + return result; +} + +enum psu_type { + PSU_TYPE_AC_110V, + PSU_TYPE_DC_48V, + PSU_TYPE_DC_12V +}; + +struct model_name_info { + enum psu_type type; + u8 offset; + u8 length; + char* model_name; +}; + +struct model_name_info models[] = { +{PSU_TYPE_AC_110V, 0x20, 8, "YM-2651Y"}, +{PSU_TYPE_DC_48V, 0x20, 8, "YM-2651V"}, +{PSU_TYPE_DC_12V, 0x00, 11, "PSU-12V-750"}, +}; + +static int as7716_32x_psu_model_name_get(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_psu_data *data = i2c_get_clientdata(client); + int i, status; + + for (i = 0; i < ARRAY_SIZE(models); i++) { + memset(data->model_name, 0, sizeof(data->model_name)); + + status = as7716_32x_psu_read_block(client, models[i].offset, + data->model_name, models[i].length); + if (status < 0) { + data->model_name[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x) offset(0x%x)\n", + client->addr, models[i].offset); + return status; + } + else { + data->model_name[models[i].length] = '\0'; + } + + /* Determine if the model name is known, if not, read next index + */ + if (strncmp(data->model_name, models[i].model_name, models[i].length) == 0) { + return 0; + } + else { + data->model_name[0] = '\0'; + } + } + + return -ENODATA; +} + +static struct as7716_32x_psu_data *as7716_32x_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status; + int power_good = 0; + + data->valid = 0; + dev_dbg(&client->dev, "Starting as7716_32x update\n"); + + /* Read psu status */ + status = as7716_32x_cpld_read(0x60, 0x2); + + if (status < 0) { + dev_dbg(&client->dev, "cpld reg 0x60 err %d\n", status); + goto exit; + } + else { + data->status = status; + } + + /* Read model name */ + memset(data->model_name, 0, sizeof(data->model_name)); + memset(data->fan_dir, 0, sizeof(data->fan_dir)); + power_good = (data->status >> (3-data->index) & 0x1); + + if (power_good) { + if (as7716_32x_psu_model_name_get(dev) < 0) { + goto exit; + } + + if (strncmp(data->model_name, + models[PSU_TYPE_DC_12V].model_name, + models[PSU_TYPE_DC_12V].length) == 0) + { + /* Read fan direction */ + + status = as7716_32x_psu_read_block(client, DC12V_FAN_DIR_OFFSET, + data->fan_dir, DC12V_FAN_DIR_LEN); + + if (status < 0) { + data->fan_dir[0] = '\0'; + dev_dbg(&client->dev, "unable to read fan direction from (0x%x) offset(0x%x)\n", + client->addr, DC12V_FAN_DIR_OFFSET); + goto exit; + } + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init as7716_32x_psu_init(void) +{ + return i2c_add_driver(&as7716_32x_psu_driver); +} + +static void __exit as7716_32x_psu_exit(void) +{ + i2c_del_driver(&as7716_32x_psu_driver); +} + +module_init(as7716_32x_psu_init); +module_exit(as7716_32x_psu_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7716_32x_psu driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_sfp.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_sfp.c new file mode 100755 index 000000000000..9c7a05632154 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_as7716_32x_sfp.c @@ -0,0 +1,365 @@ +/* + * An hwmon driver for accton as7716_32x sfp + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BIT_INDEX(i) (1UL << (i)) +#define I2C_ADDR_CPLD1 0x60 +#define I2C_ADDR_CPLD2 0x62 +#define I2C_ADDR_CPLD3 0x64 +#define CPLD1_OFFSET_QSFP_PRESET1 0x30 +#define CPLD1_OFFSET_QSFP_PRESET2 0x31 +#define CPLD1_OFFSET_QSFP_PRESET3 0x32 +#define CPLD1_OFFSET_QSFP_PRESET4 0x33 + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7716_32x_sfp_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + int port; /* Front port index */ + char eeprom[256]; /* eeprom data */ + u32 is_present; /* present status */ +}; + +static struct as7716_32x_sfp_data *as7716_32x_sfp_update_device(struct device *dev); +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_present(struct device *dev, struct device_attribute *da,char *buf); +static ssize_t show_eeprom(struct device *dev, struct device_attribute *da, char *buf); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +enum as7716_32x_sfp_sysfs_attributes { + SFP_PORT_NUMBER, + SFP_IS_PRESENT, + SFP_IS_PRESENT_ALL, + SFP_EEPROM +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(sfp_port_number, S_IRUGO, show_port_number, NULL, SFP_PORT_NUMBER); +static SENSOR_DEVICE_ATTR(sfp_is_present, S_IRUGO, show_present, NULL, SFP_IS_PRESENT); +static SENSOR_DEVICE_ATTR(sfp_is_present_all, S_IRUGO, show_present, NULL, SFP_IS_PRESENT_ALL); +static SENSOR_DEVICE_ATTR(sfp_eeprom, S_IRUGO, show_eeprom, NULL, SFP_EEPROM); + +static struct attribute *as7716_32x_sfp_attributes[] = { + &sensor_dev_attr_sfp_port_number.dev_attr.attr, + &sensor_dev_attr_sfp_is_present.dev_attr.attr, + &sensor_dev_attr_sfp_is_present_all.dev_attr.attr, + &sensor_dev_attr_sfp_eeprom.dev_attr.attr, + NULL +}; + +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_sfp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d\n", data->port+1); +} + +/* Error-check the CPLD read results. */ +#define VALIDATED_READ(_buf, _rv, _read_expr, _invert) \ +do { \ + _rv = (_read_expr); \ + if(_rv < 0) { \ + return sprintf(_buf, "READ ERROR\n"); \ + } \ + if(_invert) { \ + _rv = ~_rv; \ + } \ + _rv &= 0xFF; \ +} while(0) + +static ssize_t show_present(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + + if(attr->index == SFP_IS_PRESENT_ALL) { + int values[4]; + /* + * Report the SFP_PRESENCE status for all ports. + */ + + /* QSFP_PRESENT Ports 1-8 */ + //VALIDATED_READ(buf, values[0], accton_i2c_cpld_read(0x62, 0x9), 1); + VALIDATED_READ(buf, values[0], accton_i2c_cpld_read(I2C_ADDR_CPLD1, CPLD1_OFFSET_QSFP_PRESET1), 1); + /* QSFP_PRESENT Ports 9-16 */ + VALIDATED_READ(buf, values[1], accton_i2c_cpld_read(I2C_ADDR_CPLD1, CPLD1_OFFSET_QSFP_PRESET2), 1); + /* QSFP_PRESENT Ports 17-24 */ + VALIDATED_READ(buf, values[2], accton_i2c_cpld_read(I2C_ADDR_CPLD1, CPLD1_OFFSET_QSFP_PRESET3), 1); + /* QSFP_PRESENT Ports 25-32 */ + VALIDATED_READ(buf, values[3], accton_i2c_cpld_read(I2C_ADDR_CPLD1, CPLD1_OFFSET_QSFP_PRESET4), 1); + + /* Return values 1 -> 32 in order */ + return sprintf(buf, "%.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], values[3]); + } + else { /* SFP_IS_PRESENT */ + struct as7716_32x_sfp_data *data = as7716_32x_sfp_update_device(dev); + + if (!data->valid) { + printk("return -EIO\n"); + return -EIO; + } + + return sprintf(buf, "%d\n", data->is_present); + } +} + +static ssize_t show_eeprom(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7716_32x_sfp_data *data = as7716_32x_sfp_update_device(dev); + + if (!data->valid) { + return 0; + } + + if (!data->is_present) { + return 0; + } + + memcpy(buf, data->eeprom, sizeof(data->eeprom)); + + return sizeof(data->eeprom); +} + +static const struct attribute_group as7716_32x_sfp_group = { + .attrs = as7716_32x_sfp_attributes, +}; + +static int as7716_32x_sfp_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32x_sfp_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7716_32x_sfp_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + mutex_init(&data->update_lock); + data->port = dev_id->driver_data; + i2c_set_clientdata(client, data); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32x_sfp_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: sfp '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32x_sfp_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32x_sfp_remove(struct i2c_client *client) +{ + struct as7716_32x_sfp_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32x_sfp_group); + kfree(data); + + return 0; +} + +enum port_numbers { +as7716_32x_sfp1, as7716_32x_sfp2, as7716_32x_sfp3, as7716_32x_sfp4, +as7716_32x_sfp5, as7716_32x_sfp6, as7716_32x_sfp7, as7716_32x_sfp8, +as7716_32x_sfp9, as7716_32x_sfp10,as7716_32x_sfp11,as7716_32x_sfp12, +as7716_32x_sfp13,as7716_32x_sfp14,as7716_32x_sfp15,as7716_32x_sfp16, +as7716_32x_sfp17,as7716_32x_sfp18,as7716_32x_sfp19,as7716_32x_sfp20, +as7716_32x_sfp21,as7716_32x_sfp22,as7716_32x_sfp23,as7716_32x_sfp24, +as7716_32x_sfp25,as7716_32x_sfp26,as7716_32x_sfp27,as7716_32x_sfp28, +as7716_32x_sfp29,as7716_32x_sfp30,as7716_32x_sfp31,as7716_32x_sfp32 +}; + +static const struct i2c_device_id as7716_32x_sfp_id[] = { +{ "as7716_32x_sfp1", as7716_32x_sfp1 }, { "as7716_32x_sfp2", as7716_32x_sfp2 }, +{ "as7716_32x_sfp3", as7716_32x_sfp3 }, { "as7716_32x_sfp4", as7716_32x_sfp4 }, +{ "as7716_32x_sfp5", as7716_32x_sfp5 }, { "as7716_32x_sfp6", as7716_32x_sfp6 }, +{ "as7716_32x_sfp7", as7716_32x_sfp7 }, { "as7716_32x_sfp8", as7716_32x_sfp8 }, +{ "as7716_32x_sfp9", as7716_32x_sfp9 }, { "as7716_32x_sfp10", as7716_32x_sfp10 }, +{ "as7716_32x_sfp11", as7716_32x_sfp11 }, { "as7716_32x_sfp12", as7716_32x_sfp12 }, +{ "as7716_32x_sfp13", as7716_32x_sfp13 }, { "as7716_32x_sfp14", as7716_32x_sfp14 }, +{ "as7716_32x_sfp15", as7716_32x_sfp15 }, { "as7716_32x_sfp16", as7716_32x_sfp16 }, +{ "as7716_32x_sfp17", as7716_32x_sfp17 }, { "as7716_32x_sfp18", as7716_32x_sfp18 }, +{ "as7716_32x_sfp19", as7716_32x_sfp19 }, { "as7716_32x_sfp20", as7716_32x_sfp20 }, +{ "as7716_32x_sfp21", as7716_32x_sfp21 }, { "as7716_32x_sfp22", as7716_32x_sfp22 }, +{ "as7716_32x_sfp23", as7716_32x_sfp23 }, { "as7716_32x_sfp24", as7716_32x_sfp24 }, +{ "as7716_32x_sfp25", as7716_32x_sfp25 }, { "as7716_32x_sfp26", as7716_32x_sfp26 }, +{ "as7716_32x_sfp27", as7716_32x_sfp27 }, { "as7716_32x_sfp28", as7716_32x_sfp28 }, +{ "as7716_32x_sfp29", as7716_32x_sfp29 }, { "as7716_32x_sfp30", as7716_32x_sfp30 }, +{ "as7716_32x_sfp31", as7716_32x_sfp31 }, { "as7716_32x_sfp32", as7716_32x_sfp32 }, +{} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32x_sfp_id); + +static struct i2c_driver as7716_32x_sfp_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32x_sfp", + }, + .probe = as7716_32x_sfp_probe, + .remove = as7716_32x_sfp_remove, + .id_table = as7716_32x_sfp_id, + .address_list = normal_i2c, +}; + +static int as7716_32x_sfp_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) + goto abort; + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + + result = 0; + +abort: + return result; +} + +static struct as7716_32x_sfp_data *as7716_32x_sfp_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_sfp_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status = -1; + int i = 0; + u8 cpld_reg = 0x30 + (data->port/8); + + data->valid = 0; + + /* Read present status of the specified port number */ + data->is_present = 0; + status = accton_i2c_cpld_read(I2C_ADDR_CPLD1, cpld_reg); + + if (status < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", I2C_ADDR_CPLD1, cpld_reg, status); + goto exit; + } + + data->is_present = (status & (1 << (data->port % 8))) ? 0 : 1; + printk("data->is_present=%d, data->port=%d, status=0x%x\n",data->is_present, data->port, status); + /* Read eeprom data based on port number */ + memset(data->eeprom, 0, sizeof(data->eeprom)); + + /* Check if the port is present */ + if (data->is_present) { + /* read eeprom */ + for (i = 0; i < sizeof(data->eeprom)/I2C_SMBUS_BLOCK_MAX; i++) { + status = as7716_32x_sfp_read_block(client, i*I2C_SMBUS_BLOCK_MAX, + data->eeprom+(i*I2C_SMBUS_BLOCK_MAX), + I2C_SMBUS_BLOCK_MAX); + if (status < 0) { + printk("unable to read eeprom from port(%d)\n", data->port); + dev_dbg(&client->dev, "unable to read eeprom from port(%d)\n", data->port); + goto exit; + } + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init as7716_32x_sfp_init(void) +{ + //extern int platform_accton_as7716_32x(void); + //if (!platform_accton_as7716_32x()) { +// return -ENODEV; + //} + + return i2c_add_driver(&as7716_32x_sfp_driver); +} + +static void __exit as7716_32x_sfp_exit(void) +{ + i2c_del_driver(&as7716_32x_sfp_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton as7716_32x_sfp driver"); +MODULE_LICENSE("GPL"); + +module_init(as7716_32x_sfp_init); +module_exit(as7716_32x_sfp_exit); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_i2c_cpld.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_i2c_cpld.c new file mode 100755 index 000000000000..46d1e2773287 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/accton_i2c_cpld.c @@ -0,0 +1,259 @@ +/* + * A hwmon driver for the accton_i2c_cpld + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CPLD_VERSION_REG 0x1 + +enum as5712_54x_cpld_sysfs_attributes { + CPLD_READ_VERSION, + CPLD_BYTE_ACCESS, + CPLD_DUMP_ALL, +}; + +static ssize_t read_cpld_version(struct device *dev, struct device_attribute *da, + char *buf); +int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); + + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +/* Addresses scanned for accton_i2c_cpld + */ +static const unsigned short normal_i2c[] = { 0x31, 0x35, 0x60, 0x61, 0x62, I2C_CLIENT_END }; + +static SENSOR_DEVICE_ATTR(cpld_get_version, S_IRUGO, read_cpld_version, NULL, CPLD_READ_VERSION); + +static struct attribute *as5712_54x_cpld_attributes[] = { + &sensor_dev_attr_cpld_get_version.dev_attr.attr, + NULL +}; + +static const struct attribute_group as5712_54x_cpld_group = { + .attrs = as5712_54x_cpld_attributes, +}; + +static ssize_t read_cpld_version(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + unsigned short cpld_reg = CPLD_VERSION_REG; + u8 reg; + + if(attr->index == CPLD_READ_VERSION) { + reg = accton_i2c_cpld_read(client->addr, cpld_reg); + return sprintf(buf, "%02x\n",reg); + } + return -1 ; +} + + +static void accton_i2c_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void accton_i2c_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static int accton_i2c_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&client->dev, "i2c_check_functionality failed (0x%x)\n", client->addr); + status = -EIO; + goto exit; + } + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as5712_54x_cpld_group); + if (status) { + goto exit; + } + + dev_info(&client->dev, "chip found\n"); + accton_i2c_cpld_add_client(client); + + return 0; +exit: + return status; +} + +static int accton_i2c_cpld_remove(struct i2c_client *client) +{ + sysfs_remove_group(&client->dev.kobj, &as5712_54x_cpld_group); + + accton_i2c_cpld_remove_client(client); + return 0; +} + +static const struct i2c_device_id accton_i2c_cpld_id[] = { + { "accton_i2c_cpld", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, accton_i2c_cpld_id); + +static struct i2c_driver accton_i2c_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "accton_i2c_cpld", + }, + .probe = accton_i2c_cpld_probe, + .remove = accton_i2c_cpld_remove, + .id_table = accton_i2c_cpld_id, + .address_list = normal_i2c, +}; + +int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_read_byte_data(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(accton_i2c_cpld_read); + +int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_write_byte_data(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(accton_i2c_cpld_write); + +static int __init accton_i2c_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&accton_i2c_cpld_driver); +} + +static void __exit accton_i2c_cpld_exit(void) +{ + i2c_del_driver(&accton_i2c_cpld_driver); +} +/* +static struct dmi_system_id as7712_dmi_table[] = { + { + .ident = "Accton AS7712", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS7712"), + }, + } +}; + +int platform_accton_as7712_32x(void) +{ + return dmi_check_system(as7712_dmi_table); +} +EXPORT_SYMBOL(platform_accton_as7712_32x); +*/ +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_i2c_cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(accton_i2c_cpld_init); +module_exit(accton_i2c_cpld_exit); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/cpr_4011_4mxx.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/cpr_4011_4mxx.c new file mode 100755 index 000000000000..30bea914d589 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/cpr_4011_4mxx.c @@ -0,0 +1,400 @@ +/* + * An hwmon driver for the CPR-4011-4Mxx Redundant Power Module + * + * Copyright (C) Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_FAN_DUTY_CYCLE 100 + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x3c, 0x3d, 0x3e, 0x3f, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct cpr_4011_4mxx_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 vout_mode; /* Register value */ + u16 v_in; /* Register value */ + u16 v_out; /* Register value */ + u16 i_in; /* Register value */ + u16 i_out; /* Register value */ + u16 p_in; /* Register value */ + u16 p_out; /* Register value */ + u16 temp_input[2]; /* Register value */ + u8 fan_fault; /* Register value */ + u16 fan_duty_cycle[2]; /* Register value */ + u16 fan_speed[2]; /* Register value */ +}; + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_vout(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, const char *buf, size_t count); +static int cpr_4011_4mxx_write_word(struct i2c_client *client, u8 reg, u16 value); +static struct cpr_4011_4mxx_data *cpr_4011_4mxx_update_device(struct device *dev); + +enum cpr_4011_4mxx_sysfs_attributes { + PSU_V_IN, + PSU_V_OUT, + PSU_I_IN, + PSU_I_OUT, + PSU_P_IN, + PSU_P_OUT, + PSU_TEMP1_INPUT, + PSU_FAN1_FAULT, + PSU_FAN1_DUTY_CYCLE, + PSU_FAN1_SPEED, +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_v_in, S_IRUGO, show_linear, NULL, PSU_V_IN); +static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, show_vout, NULL, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(psu_i_in, S_IRUGO, show_linear, NULL, PSU_I_IN); +static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, show_linear, NULL, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(psu_p_in, S_IRUGO, show_linear, NULL, PSU_P_IN); +static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, show_linear, NULL, PSU_P_OUT); +static SENSOR_DEVICE_ATTR(psu_temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IRUGO, show_fan_fault, NULL, PSU_FAN1_FAULT); +static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, show_linear, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE); +static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); + +static struct attribute *cpr_4011_4mxx_attributes[] = { + &sensor_dev_attr_psu_v_in.dev_attr.attr, + &sensor_dev_attr_psu_v_out.dev_attr.attr, + &sensor_dev_attr_psu_i_in.dev_attr.attr, + &sensor_dev_attr_psu_i_out.dev_attr.attr, + &sensor_dev_attr_psu_p_in.dev_attr.attr, + &sensor_dev_attr_psu_p_out.dev_attr.attr, + &sensor_dev_attr_psu_temp1_input.dev_attr.attr, + &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, + &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, + &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, + NULL +}; + +static int two_complement_to_int(u16 data, u8 valid_bit, int mask) +{ + u16 valid_data = data & mask; + bool is_negative = valid_data >> (valid_bit - 1); + + return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data; +} + +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpr_4011_4mxx_data *data = i2c_get_clientdata(client); + int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1; + long speed; + int error; + + error = kstrtol(buf, 10, &speed); + if (error) + return error; + + if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->fan_duty_cycle[nr] = speed; + cpr_4011_4mxx_write_word(client, 0x3B + nr, data->fan_duty_cycle[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct cpr_4011_4mxx_data *data = cpr_4011_4mxx_update_device(dev); + + u16 value = 0; + int exponent, mantissa; + int multiplier = 1000; + + switch (attr->index) { + case PSU_V_IN: + value = data->v_in; + break; + case PSU_I_IN: + value = data->i_in; + break; + case PSU_I_OUT: + value = data->i_out; + break; + case PSU_P_IN: + value = data->p_in; + break; + case PSU_P_OUT: + value = data->p_out; + break; + case PSU_TEMP1_INPUT: + value = data->temp_input[0]; + break; + case PSU_FAN1_DUTY_CYCLE: + multiplier = 1; + value = data->fan_duty_cycle[0]; + break; + case PSU_FAN1_SPEED: + multiplier = 1; + value = data->fan_speed[0]; + break; + default: + break; + } + + exponent = two_complement_to_int(value >> 11, 5, 0x1f); + mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff); + + return (exponent >= 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct cpr_4011_4mxx_data *data = cpr_4011_4mxx_update_device(dev); + + u8 shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6; + + return sprintf(buf, "%d\n", data->fan_fault >> shift); +} + +static ssize_t show_vout(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct cpr_4011_4mxx_data *data = cpr_4011_4mxx_update_device(dev); + int exponent, mantissa; + int multiplier = 1000; + + exponent = two_complement_to_int(data->vout_mode, 5, 0x1f); + mantissa = data->v_out; + + return (exponent > 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static const struct attribute_group cpr_4011_4mxx_group = { + .attrs = cpr_4011_4mxx_attributes, +}; + +static int cpr_4011_4mxx_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct cpr_4011_4mxx_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct cpr_4011_4mxx_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &cpr_4011_4mxx_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &cpr_4011_4mxx_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int cpr_4011_4mxx_remove(struct i2c_client *client) +{ + struct cpr_4011_4mxx_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &cpr_4011_4mxx_group); + kfree(data); + + return 0; +} + +static const struct i2c_device_id cpr_4011_4mxx_id[] = { + { "cpr_4011_4mxx", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cpr_4011_4mxx_id); + +static struct i2c_driver cpr_4011_4mxx_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "cpr_4011_4mxx", + }, + .probe = cpr_4011_4mxx_probe, + .remove = cpr_4011_4mxx_remove, + .id_table = cpr_4011_4mxx_id, + .address_list = normal_i2c, +}; + +static int cpr_4011_4mxx_read_byte(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int cpr_4011_4mxx_read_word(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_data(client, reg); +} + +static int cpr_4011_4mxx_write_word(struct i2c_client *client, u8 reg, u16 value) +{ + return i2c_smbus_write_word_data(client, reg, value); +} + +struct reg_data_byte { + u8 reg; + u8 *value; +}; + +struct reg_data_word { + u8 reg; + u16 *value; +}; + +static struct cpr_4011_4mxx_data *cpr_4011_4mxx_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpr_4011_4mxx_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i, status; + struct reg_data_byte regs_byte[] = { {0x20, &data->vout_mode}, + {0x81, &data->fan_fault}}; + struct reg_data_word regs_word[] = { {0x88, &data->v_in}, + {0x8b, &data->v_out}, + {0x89, &data->i_in}, + {0x8c, &data->i_out}, + {0x96, &data->p_out}, + {0x97, &data->p_in}, + {0x8d, &(data->temp_input[0])}, + {0x8e, &(data->temp_input[1])}, + {0x3b, &(data->fan_duty_cycle[0])}, + {0x3c, &(data->fan_duty_cycle[1])}, + {0x90, &(data->fan_speed[0])}, + {0x91, &(data->fan_speed[1])}}; + + dev_dbg(&client->dev, "Starting cpr_4011_4mxx update\n"); + + /* Read byte data */ + for (i = 0; i < ARRAY_SIZE(regs_byte); i++) { + status = cpr_4011_4mxx_read_byte(client, regs_byte[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_byte[i].reg, status); + } + else { + *(regs_byte[i].value) = status; + } + } + + /* Read word data */ + for (i = 0; i < ARRAY_SIZE(regs_word); i++) { + status = cpr_4011_4mxx_read_word(client, regs_word[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_word[i].reg, status); + } + else { + *(regs_word[i].value) = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init cpr_4011_4mxx_init(void) +{ + return i2c_add_driver(&cpr_4011_4mxx_driver); +} + +static void __exit cpr_4011_4mxx_exit(void) +{ + i2c_del_driver(&cpr_4011_4mxx_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("CPR_4011_4MXX driver"); +MODULE_LICENSE("GPL"); + +module_init(cpr_4011_4mxx_init); +module_exit(cpr_4011_4mxx_exit); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/optoe.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/optoe.c new file mode 100755 index 000000000000..16be2fef89b1 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/optoe.c @@ -0,0 +1,1148 @@ +/* + * optoe.c - A driver to read and write the EEPROM on optical transceivers + * (SFP, QSFP and similar I2C based devices) + * + * Copyright (C) 2014 Cumulus networks Inc. + * Copyright (C) 2017 Finisar Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Freeoftware Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/* + * Description: + * a) Optical transceiver EEPROM read/write transactions are just like + * the at24 eeproms managed by the at24.c i2c driver + * b) The register/memory layout is up to 256 128 byte pages defined by + * a "pages valid" register and switched via a "page select" + * register as explained in below diagram. + * c) 256 bytes are mapped at a time. 'Lower page 00h' is the first 128 + * bytes of address space, and always references the same + * location, independent of the page select register. + * All mapped pages are mapped into the upper 128 bytes + * (offset 128-255) of the i2c address. + * d) Devices with one I2C address (eg QSFP) use I2C address 0x50 + * (A0h in the spec), and map all pages in the upper 128 bytes + * of that address. + * e) Devices with two I2C addresses (eg SFP) have 256 bytes of data + * at I2C address 0x50, and 256 bytes of data at I2C address + * 0x51 (A2h in the spec). Page selection and paged access + * only apply to this second I2C address (0x51). + * e) The address space is presented, by the driver, as a linear + * address space. For devices with one I2C client at address + * 0x50 (eg QSFP), offset 0-127 are in the lower + * half of address 50/A0h/client[0]. Offset 128-255 are in + * page 0, 256-383 are page 1, etc. More generally, offset + * 'n' resides in page (n/128)-1. ('page -1' is the lower + * half, offset 0-127). + * f) For devices with two I2C clients at address 0x50 and 0x51 (eg SFP), + * the address space places offset 0-127 in the lower + * half of 50/A0/client[0], offset 128-255 in the upper + * half. Offset 256-383 is in the lower half of 51/A2/client[1]. + * Offset 384-511 is in page 0, in the upper half of 51/A2/... + * Offset 512-639 is in page 1, in the upper half of 51/A2/... + * Offset 'n' is in page (n/128)-3 (for n > 383) + * + * One I2c addressed (eg QSFP) Memory Map + * + * 2-Wire Serial Address: 1010000x + * + * Lower Page 00h (128 bytes) + * ===================== + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * |Page Select Byte(127)| + * ===================== + * | + * | + * | + * | + * V + * ------------------------------------------------------------ + * | | | | + * | | | | + * | | | | + * | | | | + * | | | | + * | | | | + * | | | | + * | | | | + * | | | | + * V V V V + * ------------ -------------- --------------- -------------- + * | | | | | | | | + * | Upper | | Upper | | Upper | | Upper | + * | Page 00h | | Page 01h | | Page 02h | | Page 03h | + * | | | (Optional) | | (Optional) | | (Optional | + * | | | | | | | for Cable | + * | | | | | | | Assemblies) | + * | ID | | AST | | User | | | + * | Fields | | Table | | EEPROM Data | | | + * | | | | | | | | + * | | | | | | | | + * | | | | | | | | + * ------------ -------------- --------------- -------------- + * + * The SFF 8436 (QSFP) spec only defines the 4 pages described above. + * In anticipation of future applications and devices, this driver + * supports access to the full architected range, 256 pages. + * + **/ + +/* #define DEBUG 1 */ + +#undef EEPROM_CLASS +#ifdef CONFIG_EEPROM_CLASS +#define EEPROM_CLASS +#endif +#ifdef CONFIG_EEPROM_CLASS_MODULE +#define EEPROM_CLASS +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The optoe driver is for read/write access to the EEPROM on standard + * I2C based optical transceivers (SFP, QSFP, etc) + * + * While based on the at24 driver, it eliminates code that supports other + * types of I2C EEPROMs, and adds support for pages accessed through the + * page-select register at offset 127. + */ + +struct optoe_platform_data { + u32 byte_len; /* size (sum of all addr) */ + u16 page_size; /* for writes */ + u8 flags; + + void (*setup)(struct memory_accessor *, void *context); + void *context; +#ifdef EEPROM_CLASS + struct eeprom_platform_data *eeprom_data; /* extra data for the eeprom_class */ +#endif +}; + +#ifdef EEPROM_CLASS +#include +#endif + +#include + +/* fundamental unit of addressing for EEPROM */ +#define OPTOE_PAGE_SIZE 128 +/* + * Single address devices (eg QSFP) have 256 pages, plus the unpaged + * low 128 bytes. If the device does not support paging, it is + * only 2 'pages' long. + */ +#define OPTOE_ARCH_PAGES 256 +#define ONE_ADDR_EEPROM_SIZE ((1 + OPTOE_ARCH_PAGES) * OPTOE_PAGE_SIZE) +#define ONE_ADDR_EEPROM_UNPAGED_SIZE (2 * OPTOE_PAGE_SIZE) +/* + * Dual address devices (eg SFP) have 256 pages, plus the unpaged + * low 128 bytes, plus 256 bytes at 0x50. If the device does not + * support paging, it is 4 'pages' long. + */ +#define TWO_ADDR_EEPROM_SIZE ((3 + OPTOE_ARCH_PAGES) * OPTOE_PAGE_SIZE) +#define TWO_ADDR_EEPROM_UNPAGED_SIZE (4 * OPTOE_PAGE_SIZE) + +/* a few constants to find our way around the EEPROM */ +#define OPTOE_PAGE_SELECT_REG 0x7F +#define ONE_ADDR_PAGEABLE_REG 0x02 +#define ONE_ADDR_NOT_PAGEABLE (1<<2) +#define TWO_ADDR_PAGEABLE_REG 0x40 +#define TWO_ADDR_PAGEABLE (1<<4) +#define OPTOE_ID_REG 0 + +/* The maximum length of a port name */ +#define MAX_PORT_NAME_LEN 20 +struct optoe_data { + struct optoe_platform_data chip; + struct memory_accessor macc; + int use_smbus; + char port_name[MAX_PORT_NAME_LEN]; + + /* + * Lock protects against activities from other Linux tasks, + * but not from changes by other I2C masters. + */ + struct mutex lock; + struct bin_attribute bin; + struct attribute_group attr_group; + + u8 *writebuf; + unsigned write_max; + + unsigned num_addresses; + +#ifdef EEPROM_CLASS + struct eeprom_device *eeprom_dev; +#endif + + /* dev_class: ONE_ADDR (QSFP) or TWO_ADDR (SFP) */ + int dev_class; + + struct i2c_client *client[]; +}; + +typedef enum optoe_opcode { + OPTOE_READ_OP = 0, + OPTOE_WRITE_OP = 1 +} optoe_opcode_e; + +/* + * This parameter is to help this driver avoid blocking other drivers out + * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C + * clock, one 256 byte read takes about 1/43 second which is excessive; + * but the 1/170 second it takes at 400 kHz may be quite reasonable; and + * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible. + * + * This value is forced to be a power of two so that writes align on pages. + */ +static unsigned io_limit = OPTOE_PAGE_SIZE; + +/* + * specs often allow 5 msec for a page write, sometimes 20 msec; + * it's important to recover from write timeouts. + */ +static unsigned write_timeout = 25; + +/* + * flags to distinguish one-address (QSFP family) from two-address (SFP family) + * If the family is not known, figure it out when the device is accessed + */ +#define ONE_ADDR 1 +#define TWO_ADDR 2 + +static const struct i2c_device_id optoe_ids[] = { + { "optoe1", ONE_ADDR }, + { "optoe2", TWO_ADDR }, + { "sff8436", ONE_ADDR }, + { "24c04", TWO_ADDR }, + { /* END OF LIST */ } +}; +MODULE_DEVICE_TABLE(i2c, optoe_ids); + +/*-------------------------------------------------------------------------*/ +/* + * This routine computes the addressing information to be used for + * a given r/w request. + * + * Task is to calculate the client (0 = i2c addr 50, 1 = i2c addr 51), + * the page, and the offset. + * + * Handles both single address (eg QSFP) and two address (eg SFP). + * For SFP, offset 0-255 are on client[0], >255 is on client[1] + * Offset 256-383 are on the lower half of client[1] + * Pages are accessible on the upper half of client[1]. + * Offset >383 are in 128 byte pages mapped into the upper half + * + * For QSFP, all offsets are on client[0] + * offset 0-127 are on the lower half of client[0] (no paging) + * Pages are accessible on the upper half of client[1]. + * Offset >127 are in 128 byte pages mapped into the upper half + * + * Callers must not read/write beyond the end of a client or a page + * without recomputing the client/page. Hence offset (within page) + * plus length must be less than or equal to 128. (Note that this + * routine does not have access to the length of the call, hence + * cannot do the validity check.) + * + * Offset within Lower Page 00h and Upper Page 00h are not recomputed + */ + +static uint8_t optoe_translate_offset(struct optoe_data *optoe, + loff_t *offset, struct i2c_client **client) +{ + unsigned page = 0; + + *client = optoe->client[0]; + + /* if SFP style, offset > 255, shift to i2c addr 0x51 */ + if (optoe->dev_class == TWO_ADDR) { + if (*offset > 255) { + /* like QSFP, but shifted to client[1] */ + *client = optoe->client[1]; + *offset -= 256; + } + } + + /* + * if offset is in the range 0-128... + * page doesn't matter (using lower half), return 0. + * offset is already correct (don't add 128 to get to paged area) + */ + if (*offset < OPTOE_PAGE_SIZE) + return page; + + /* note, page will always be positive since *offset >= 128 */ + page = (*offset >> 7)-1; + /* 0x80 places the offset in the top half, offset is last 7 bits */ + *offset = OPTOE_PAGE_SIZE + (*offset & 0x7f); + + return page; /* note also returning client and offset */ +} + +static ssize_t optoe_eeprom_read(struct optoe_data *optoe, + struct i2c_client *client, + char *buf, unsigned offset, size_t count) +{ + struct i2c_msg msg[2]; + u8 msgbuf[2]; + unsigned long timeout, read_time; + int status, i; + + memset(msg, 0, sizeof(msg)); + + switch (optoe->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + /*smaller eeproms can work given some SMBus extension calls */ + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + break; + case I2C_SMBUS_WORD_DATA: + /* Check for odd length transaction */ + count = (count == 1) ? 1 : 2; + break; + case I2C_SMBUS_BYTE_DATA: + count = 1; + break; + default: + /* + * When we have a better choice than SMBus calls, use a + * combined I2C message. Write address; then read up to + * io_limit data bytes. msgbuf is u8 and will cast to our + * needs. + */ + i = 0; + msgbuf[i++] = offset; + + msg[0].addr = client->addr; + msg[0].buf = msgbuf; + msg[0].len = i; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + } + + /* + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + read_time = jiffies; + + switch (optoe->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + status = i2c_smbus_read_i2c_block_data(client, offset, + count, buf); + break; + case I2C_SMBUS_WORD_DATA: + status = i2c_smbus_read_word_data(client, offset); + if (status >= 0) { + buf[0] = status & 0xff; + if (count == 2) + buf[1] = status >> 8; + status = count; + } + break; + case I2C_SMBUS_BYTE_DATA: + status = i2c_smbus_read_byte_data(client, offset); + if (status >= 0) { + buf[0] = status; + status = count; + } + break; + default: + status = i2c_transfer(client->adapter, msg, 2); + if (status == 2) + status = count; + } + + dev_dbg(&client->dev, "eeprom read %zu@%d --> %d (%ld)\n", + count, offset, status, jiffies); + + if (status == count) /* happy path */ + return count; + + if (status == -ENXIO) /* no module present */ + return status; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(read_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t optoe_eeprom_write(struct optoe_data *optoe, + struct i2c_client *client, + const char *buf, + unsigned offset, size_t count) +{ + struct i2c_msg msg; + ssize_t status; + unsigned long timeout, write_time; + unsigned next_page_start; + int i = 0; + + /* write max is at most a page + * (In this driver, write_max is actually one byte!) + */ + if (count > optoe->write_max) + count = optoe->write_max; + + /* shorten count if necessary to avoid crossing page boundary */ + next_page_start = roundup(offset + 1, OPTOE_PAGE_SIZE); + if (offset + count > next_page_start) + count = next_page_start - offset; + + switch (optoe->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + /*smaller eeproms can work given some SMBus extension calls */ + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + break; + case I2C_SMBUS_WORD_DATA: + /* Check for odd length transaction */ + count = (count == 1) ? 1 : 2; + break; + case I2C_SMBUS_BYTE_DATA: + count = 1; + break; + default: + /* If we'll use I2C calls for I/O, set up the message */ + msg.addr = client->addr; + msg.flags = 0; + + /* msg.buf is u8 and casts will mask the values */ + msg.buf = optoe->writebuf; + + msg.buf[i++] = offset; + memcpy(&msg.buf[i], buf, count); + msg.len = i + count; + break; + } + + /* + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + write_time = jiffies; + + switch (optoe->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + status = i2c_smbus_write_i2c_block_data(client, + offset, count, buf); + if (status == 0) + status = count; + break; + case I2C_SMBUS_WORD_DATA: + if (count == 2) { + status = i2c_smbus_write_word_data(client, + offset, (u16)((buf[0])|(buf[1] << 8))); + } else { + /* count = 1 */ + status = i2c_smbus_write_byte_data(client, + offset, buf[0]); + } + if (status == 0) + status = count; + break; + case I2C_SMBUS_BYTE_DATA: + status = i2c_smbus_write_byte_data(client, offset, + buf[0]); + if (status == 0) + status = count; + break; + default: + status = i2c_transfer(client->adapter, &msg, 1); + if (status == 1) + status = count; + break; + } + + dev_dbg(&client->dev, "eeprom write %zu@%d --> %ld (%lu)\n", + count, offset, (long int) status, jiffies); + + if (status == count) + return count; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(write_time, timeout)); + + return -ETIMEDOUT; +} + + +static ssize_t optoe_eeprom_update_client(struct optoe_data *optoe, + char *buf, loff_t off, + size_t count, optoe_opcode_e opcode) +{ + struct i2c_client *client; + ssize_t retval = 0; + uint8_t page = 0; + loff_t phy_offset = off; + int ret = 0; + + page = optoe_translate_offset(optoe, &phy_offset, &client); + dev_dbg(&client->dev, + "optoe_eeprom_update_client off %lld page:%d phy_offset:%lld, count:%ld, opcode:%d\n", + off, page, phy_offset, (long int) count, opcode); + if (page > 0) { + ret = optoe_eeprom_write(optoe, client, &page, + OPTOE_PAGE_SELECT_REG, 1); + if (ret < 0) { + dev_dbg(&client->dev, + "Write page register for page %d failed ret:%d!\n", + page, ret); + return ret; + } + } + + while (count) { + ssize_t status; + + if (opcode == OPTOE_READ_OP) { + status = optoe_eeprom_read(optoe, client, + buf, phy_offset, count); + } else { + status = optoe_eeprom_write(optoe, client, + buf, phy_offset, count); + } + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + phy_offset += status; + count -= status; + retval += status; + } + + + if (page > 0) { + /* return the page register to page 0 (why?) */ + page = 0; + ret = optoe_eeprom_write(optoe, client, &page, + OPTOE_PAGE_SELECT_REG, 1); + if (ret < 0) { + dev_err(&client->dev, + "Restore page register to 0 failed:%d!\n", ret); + /* error only if nothing has been transferred */ + if (retval == 0) retval = ret; + } + } + return retval; +} + +/* + * Figure out if this access is within the range of supported pages. + * Note this is called on every access because we don't know if the + * module has been replaced since the last call. + * If/when modules support more pages, this is the routine to update + * to validate and allow access to additional pages. + * + * Returns updated len for this access: + * - entire access is legal, original len is returned. + * - access begins legal but is too long, len is truncated to fit. + * - initial offset exceeds supported pages, return -EINVAL + */ +static ssize_t optoe_page_legal(struct optoe_data *optoe, + loff_t off, size_t len) +{ + struct i2c_client *client = optoe->client[0]; + u8 regval; + int status; + size_t maxlen; + + if (off < 0) return -EINVAL; + if (optoe->dev_class == TWO_ADDR) { + /* SFP case */ + /* if no pages needed, we're good */ + if ((off + len) <= TWO_ADDR_EEPROM_UNPAGED_SIZE) return len; + /* if offset exceeds possible pages, we're not good */ + if (off >= TWO_ADDR_EEPROM_SIZE) return -EINVAL; + /* in between, are pages supported? */ + status = optoe_eeprom_read(optoe, client, ®val, + TWO_ADDR_PAGEABLE_REG, 1); + if (status < 0) return status; /* error out (no module?) */ + if (regval & TWO_ADDR_PAGEABLE) { + /* Pages supported, trim len to the end of pages */ + maxlen = TWO_ADDR_EEPROM_SIZE - off; + } else { + /* pages not supported, trim len to unpaged size */ + if (off >= TWO_ADDR_EEPROM_UNPAGED_SIZE) return -EINVAL; + maxlen = TWO_ADDR_EEPROM_UNPAGED_SIZE - off; + } + len = (len > maxlen) ? maxlen : len; + dev_dbg(&client->dev, + "page_legal, SFP, off %lld len %ld\n", + off, (long int) len); + } else { + /* QSFP case */ + /* if no pages needed, we're good */ + if ((off + len) <= ONE_ADDR_EEPROM_UNPAGED_SIZE) return len; + /* if offset exceeds possible pages, we're not good */ + if (off >= ONE_ADDR_EEPROM_SIZE) return -EINVAL; + /* in between, are pages supported? */ + status = optoe_eeprom_read(optoe, client, ®val, + ONE_ADDR_PAGEABLE_REG, 1); + if (status < 0) return status; /* error out (no module?) */ + if (regval & ONE_ADDR_NOT_PAGEABLE) { + /* pages not supported, trim len to unpaged size */ + if (off >= ONE_ADDR_EEPROM_UNPAGED_SIZE) return -EINVAL; + maxlen = ONE_ADDR_EEPROM_UNPAGED_SIZE - off; + } else { + /* Pages supported, trim len to the end of pages */ + maxlen = ONE_ADDR_EEPROM_SIZE - off; + } + len = (len > maxlen) ? maxlen : len; + dev_dbg(&client->dev, + "page_legal, QSFP, off %lld len %ld\n", + off, (long int) len); + } + return len; +} + +static ssize_t optoe_read_write(struct optoe_data *optoe, + char *buf, loff_t off, size_t len, optoe_opcode_e opcode) +{ + struct i2c_client *client = optoe->client[0]; + int chunk; + int status = 0; + ssize_t retval; + size_t pending_len = 0, chunk_len = 0; + loff_t chunk_offset = 0, chunk_start_offset = 0; + + dev_dbg(&client->dev, + "optoe_read_write: off %lld len:%ld, opcode:%s\n", + off, (long int) len, (opcode == OPTOE_READ_OP) ? "r": "w"); + if (unlikely(!len)) + return len; + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&optoe->lock); + + /* + * Confirm this access fits within the device suppored addr range + */ + status = optoe_page_legal(optoe, off, len); + if (status < 0) { + goto err; + } + len = status; + + /* + * For each (128 byte) chunk involved in this request, issue a + * separate call to sff_eeprom_update_client(), to + * ensure that each access recalculates the client/page + * and writes the page register as needed. + * Note that chunk to page mapping is confusing, is different for + * QSFP and SFP, and never needs to be done. Don't try! + */ + pending_len = len; /* amount remaining to transfer */ + retval = 0; /* amount transferred */ + for (chunk = off >> 7; chunk <= (off + len - 1) >> 7; chunk++) { + + /* + * Compute the offset and number of bytes to be read/write + * + * 1. start at offset 0 (within the chunk), and read/write + * the entire chunk + * 2. start at offset 0 (within the chunk) and read/write less + * than entire chunk + * 3. start at an offset not equal to 0 and read/write the rest + * of the chunk + * 4. start at an offset not equal to 0 and read/write less than + * (end of chunk - offset) + */ + chunk_start_offset = chunk * OPTOE_PAGE_SIZE; + + if (chunk_start_offset < off) { + chunk_offset = off; + if ((off + pending_len) < (chunk_start_offset + + OPTOE_PAGE_SIZE)) + chunk_len = pending_len; + else + chunk_len = OPTOE_PAGE_SIZE - off; + } else { + chunk_offset = chunk_start_offset; + if (pending_len > OPTOE_PAGE_SIZE) + chunk_len = OPTOE_PAGE_SIZE; + else + chunk_len = pending_len; + } + + dev_dbg(&client->dev, + "sff_r/w: off %lld, len %ld, chunk_start_offset %lld, chunk_offset %lld, chunk_len %ld, pending_len %ld\n", + off, (long int) len, chunk_start_offset, chunk_offset, + (long int) chunk_len, (long int) pending_len); + + /* + * note: chunk_offset is from the start of the EEPROM, + * not the start of the chunk + */ + status = optoe_eeprom_update_client(optoe, buf, + chunk_offset, chunk_len, opcode); + if (status != chunk_len) { + /* This is another 'no device present' path */ + dev_dbg(&client->dev, + "optoe_update_client for chunk %d chunk_offset %lld chunk_len %ld failed %d!\n", + chunk, chunk_offset, (long int) chunk_len, status); + goto err; + } + buf += status; + pending_len -= status; + retval += status; + } + mutex_unlock(&optoe->lock); + + return retval; + +err: + mutex_unlock(&optoe->lock); + + return status; +} + +static ssize_t optoe_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, + struct device, kobj)); + struct optoe_data *optoe = i2c_get_clientdata(client); + + return optoe_read_write(optoe, buf, off, count, OPTOE_READ_OP); +} + + +static ssize_t optoe_bin_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, + struct device, kobj)); + struct optoe_data *optoe = i2c_get_clientdata(client); + + return optoe_read_write(optoe, buf, off, count, OPTOE_WRITE_OP); +} +/*-------------------------------------------------------------------------*/ + +/* + * This lets other kernel code access the eeprom data. For example, it + * might hold a board's Ethernet address, or board-specific calibration + * data generated on the manufacturing floor. + */ + +static ssize_t optoe_macc_read(struct memory_accessor *macc, + char *buf, off_t offset, size_t count) +{ + struct optoe_data *optoe = container_of(macc, + struct optoe_data, macc); + + return optoe_read_write(optoe, buf, offset, count, OPTOE_READ_OP); +} + +static ssize_t optoe_macc_write(struct memory_accessor *macc, + const char *buf, off_t offset, size_t count) +{ + struct optoe_data *optoe = container_of(macc, + struct optoe_data, macc); + + return optoe_read_write(optoe, (char *) buf, offset, + count, OPTOE_WRITE_OP); +} + +/*-------------------------------------------------------------------------*/ + +static int optoe_remove(struct i2c_client *client) +{ + struct optoe_data *optoe; + int i; + + optoe = i2c_get_clientdata(client); + sysfs_remove_group(&client->dev.kobj, &optoe->attr_group); + sysfs_remove_bin_file(&client->dev.kobj, &optoe->bin); + + for (i = 1; i < optoe->num_addresses; i++) + i2c_unregister_device(optoe->client[i]); + +#ifdef EEPROM_CLASS + eeprom_device_unregister(optoe->eeprom_dev); +#endif + + kfree(optoe->writebuf); + kfree(optoe); + return 0; +} + +static ssize_t show_port_name(struct device *dev, + struct device_attribute *dattr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct optoe_data *optoe = i2c_get_clientdata(client); + ssize_t count; + + mutex_lock(&optoe->lock); + count = sprintf(buf, "%s\n", optoe->port_name); + mutex_unlock(&optoe->lock); + + return count; +} + +static ssize_t set_port_name(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct optoe_data *optoe = i2c_get_clientdata(client); + char port_name[MAX_PORT_NAME_LEN]; + + /* no checking, this value is not used except by show_port_name */ + + if (sscanf(buf, "%19s", port_name) != 1) + return -EINVAL; + + mutex_lock(&optoe->lock); + strcpy(optoe->port_name, port_name); + mutex_unlock(&optoe->lock); + + return count; +} + +static DEVICE_ATTR(port_name, S_IRUGO | S_IWUSR, + show_port_name, set_port_name); + +static ssize_t show_dev_class(struct device *dev, + struct device_attribute *dattr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct optoe_data *optoe = i2c_get_clientdata(client); + ssize_t count; + + mutex_lock(&optoe->lock); + count = sprintf(buf, "%d\n", optoe->dev_class); + mutex_unlock(&optoe->lock); + + return count; +} + +static ssize_t set_dev_class(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct optoe_data *optoe = i2c_get_clientdata(client); + int dev_class; + + /* + * dev_class is actually the number of sfp ports used, thus + * legal values are "1" (QSFP class) and "2" (SFP class) + */ + if (sscanf(buf, "%d", &dev_class) != 1 || + dev_class < 1 || dev_class > 2) + return -EINVAL; + + mutex_lock(&optoe->lock); + optoe->dev_class = dev_class; + mutex_unlock(&optoe->lock); + + return count; +} + +static DEVICE_ATTR(dev_class, S_IRUGO | S_IWUSR, + show_dev_class, set_dev_class); + +static struct attribute *optoe_attrs[] = { + &dev_attr_port_name.attr, + &dev_attr_dev_class.attr, + NULL, +}; + +static struct attribute_group optoe_attr_group = { + .attrs = optoe_attrs, +}; + +static int optoe_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int err; + int use_smbus = 0; + struct optoe_platform_data chip; + struct optoe_data *optoe; + int num_addresses = 0; + int i = 0; + + if (client->addr != 0x50) { + dev_dbg(&client->dev, "probe, bad i2c addr: 0x%x\n", + client->addr); + err = -EINVAL; + goto exit; + } + + if (client->dev.platform_data) { + chip = *(struct optoe_platform_data *)client->dev.platform_data; + dev_dbg(&client->dev, "probe, chip provided, flags:0x%x; name: %s\n", chip.flags, client->name); + } else { + if (!id->driver_data) { + err = -ENODEV; + goto exit; + } + dev_dbg(&client->dev, "probe, building chip\n"); + chip.flags = 0; + chip.setup = NULL; + chip.context = NULL; +#ifdef EEPROM_CLASS + chip.eeprom_data = NULL; +#endif + } + + /* Use I2C operations unless we're stuck with SMBus extensions. */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + use_smbus = I2C_SMBUS_I2C_BLOCK_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) { + use_smbus = I2C_SMBUS_WORD_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + use_smbus = I2C_SMBUS_BYTE_DATA; + } else { + err = -EPFNOSUPPORT; + goto exit; + } + } + + + /* + * Make room for two i2c clients + */ + num_addresses = 2; + + optoe = kzalloc(sizeof(struct optoe_data) + + num_addresses * sizeof(struct i2c_client *), + GFP_KERNEL); + if (!optoe) { + err = -ENOMEM; + goto exit; + } + + mutex_init(&optoe->lock); + + /* determine whether this is a one-address or two-address module */ + if ((strcmp(client->name, "optoe1") == 0) || + (strcmp(client->name, "sff8436") == 0)) { + /* one-address (eg QSFP) family */ + optoe->dev_class = ONE_ADDR; + chip.byte_len = ONE_ADDR_EEPROM_SIZE; + num_addresses = 1; + } else if ((strcmp(client->name, "optoe2") == 0) || + (strcmp(client->name, "24c04") == 0)) { + /* SFP family */ + optoe->dev_class = TWO_ADDR; + chip.byte_len = TWO_ADDR_EEPROM_SIZE; + } else { /* those were the only two choices */ + err = -EINVAL; + goto exit; + } + + dev_dbg(&client->dev, "dev_class: %d\n", optoe->dev_class); + optoe->use_smbus = use_smbus; + optoe->chip = chip; + optoe->num_addresses = num_addresses; + strcpy(optoe->port_name, "unitialized"); + + /* + * Export the EEPROM bytes through sysfs, since that's convenient. + * By default, only root should see the data (maybe passwords etc) + */ + sysfs_bin_attr_init(&optoe->bin); + optoe->bin.attr.name = "eeprom"; + optoe->bin.attr.mode = S_IRUGO; + optoe->bin.read = optoe_bin_read; + optoe->bin.size = chip.byte_len; + + optoe->macc.read = optoe_macc_read; + + if (!use_smbus || + (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) || + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_WORD_DATA) || + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + /* + * NOTE: AN-2079 + * Finisar recommends that the host implement 1 byte writes + * only since this module only supports 32 byte page boundaries. + * 2 byte writes are acceptable for PE and Vout changes per + * Application Note AN-2071. + */ + unsigned write_max = 1; + + optoe->macc.write = optoe_macc_write; + + optoe->bin.write = optoe_bin_write; + optoe->bin.attr.mode |= S_IWUSR; + + if (write_max > io_limit) + write_max = io_limit; + if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) + write_max = I2C_SMBUS_BLOCK_MAX; + optoe->write_max = write_max; + + /* buffer (data + address at the beginning) */ + optoe->writebuf = kmalloc(write_max + 2, GFP_KERNEL); + if (!optoe->writebuf) { + err = -ENOMEM; + goto exit_kfree; + } + } else { + dev_warn(&client->dev, + "cannot write due to controller restrictions."); + } + + optoe->client[0] = client; + + /* use a dummy I2C device for two-address chips */ + for (i = 1; i < num_addresses; i++) { + optoe->client[i] = i2c_new_dummy(client->adapter, + client->addr + i); + if (!optoe->client[i]) { + dev_err(&client->dev, "address 0x%02x unavailable\n", + client->addr + i); + err = -EADDRINUSE; + goto err_struct; + } + } + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &optoe->bin); + if (err) + goto err_struct; + + optoe->attr_group = optoe_attr_group; + + err = sysfs_create_group(&client->dev.kobj, &optoe->attr_group); + if (err) { + dev_err(&client->dev, "failed to create sysfs attribute group.\n"); + goto err_struct; + } +#ifdef EEPROM_CLASS + optoe->eeprom_dev = eeprom_device_register(&client->dev, + chip.eeprom_data); + if (IS_ERR(optoe->eeprom_dev)) { + dev_err(&client->dev, "error registering eeprom device.\n"); + err = PTR_ERR(optoe->eeprom_dev); + goto err_sysfs_cleanup; + } +#endif + + i2c_set_clientdata(client, optoe); + + dev_info(&client->dev, "%zu byte %s EEPROM, %s\n", + optoe->bin.size, client->name, + optoe->bin.write ? "read/write" : "read-only"); + + if (use_smbus == I2C_SMBUS_WORD_DATA || + use_smbus == I2C_SMBUS_BYTE_DATA) { + dev_notice(&client->dev, "Falling back to %s reads, " + "performance will suffer\n", use_smbus == + I2C_SMBUS_WORD_DATA ? "word" : "byte"); + } + + if (chip.setup) + chip.setup(&optoe->macc, chip.context); + + return 0; + +#ifdef EEPROM_CLASS +err_sysfs_cleanup: + sysfs_remove_group(&client->dev.kobj, &optoe->attr_group); + sysfs_remove_bin_file(&client->dev.kobj, &optoe->bin); +#endif + +err_struct: + for (i = 1; i < num_addresses; i++) { + if (optoe->client[i]) + i2c_unregister_device(optoe->client[i]); + } + + kfree(optoe->writebuf); +exit_kfree: + kfree(optoe); +exit: + dev_dbg(&client->dev, "probe error %d\n", err); + + return err; +} + +/*-------------------------------------------------------------------------*/ + +static struct i2c_driver optoe_driver = { + .driver = { + .name = "optoe", + .owner = THIS_MODULE, + }, + .probe = optoe_probe, + .remove = optoe_remove, + .id_table = optoe_ids, +}; + +static int __init optoe_init(void) +{ + + if (!io_limit) { + pr_err("optoe: io_limit must not be 0!\n"); + return -EINVAL; + } + + io_limit = rounddown_pow_of_two(io_limit); + return i2c_add_driver(&optoe_driver); +} +module_init(optoe_init); + +static void __exit optoe_exit(void) +{ + i2c_del_driver(&optoe_driver); +} +module_exit(optoe_exit); + +MODULE_DESCRIPTION("Driver for optical transceiver (SFP, QSFP, ...) EEPROMs"); +MODULE_AUTHOR("DON BOLLINGER "); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/ym2651y.c new file mode 100755 index 000000000000..8e76c56b54fc --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/modules/ym2651y.c @@ -0,0 +1,603 @@ +/* + * An hwmon driver for the 3Y Power YM-2651Y Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_FAN_DUTY_CYCLE 100 + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x58, 0x5b, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct ym2651y_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 capability; /* Register value */ + u16 status_word; /* Register value */ + u8 fan_fault; /* Register value */ + u8 over_temp; /* Register value */ + u16 v_out; /* Register value */ + u16 i_out; /* Register value */ + u16 p_out; /* Register value */ + u16 temp; /* Register value */ + u16 fan_speed; /* Register value */ + u16 fan_duty_cycle[2]; /* Register value */ + u8 fan_dir[4]; /* Register value */ + u8 pmbus_revision; /* Register value */ + u8 mfr_id[10]; /* Register value */ + u8 mfr_model[10]; /* Register value */ + u8 mfr_revsion[3]; /* Register value */ + u16 mfr_vin_min; /* Register value */ + u16 mfr_vin_max; /* Register value */ + u16 mfr_iin_max; /* Register value */ + u16 mfr_iout_max; /* Register value */ + u16 mfr_pin_max; /* Register value */ + u16 mfr_pout_max; /* Register value */ + u16 mfr_vout_min; /* Register value */ + u16 mfr_vout_max; /* Register value */ +}; + +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_word(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf); +static struct ym2651y_data *ym2651y_update_device(struct device *dev); +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value); + +enum ym2651y_sysfs_attributes { + PSU_POWER_ON = 0, + PSU_TEMP_FAULT, + PSU_POWER_GOOD, + PSU_FAN1_FAULT, + PSU_FAN_DIRECTION, + PSU_OVER_TEMP, + PSU_V_OUT, + PSU_I_OUT, + PSU_P_OUT, + PSU_P_OUT_UV, /*In Unit of microVolt, instead of mini.*/ + PSU_TEMP1_INPUT, + PSU_FAN1_SPEED, + PSU_FAN1_DUTY_CYCLE, + PSU_PMBUS_REVISION, + PSU_MFR_ID, + PSU_MFR_MODEL, + PSU_MFR_REVISION, + PSU_MFR_VIN_MIN, + PSU_MFR_VIN_MAX, + PSU_MFR_VOUT_MIN, + PSU_MFR_VOUT_MAX, + PSU_MFR_IIN_MAX, + PSU_MFR_IOUT_MAX, + PSU_MFR_PIN_MAX, + PSU_MFR_POUT_MAX +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_power_on, S_IRUGO, show_word, NULL, PSU_POWER_ON); +static SENSOR_DEVICE_ATTR(psu_temp_fault, S_IRUGO, show_word, NULL, PSU_TEMP_FAULT); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_word, NULL, PSU_POWER_GOOD); +static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IRUGO, show_fan_fault, NULL, PSU_FAN1_FAULT); +static SENSOR_DEVICE_ATTR(psu_over_temp, S_IRUGO, show_over_temp, NULL, PSU_OVER_TEMP); +static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, show_linear, NULL, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, show_linear, NULL, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, show_linear, NULL, PSU_P_OUT); +static SENSOR_DEVICE_ATTR(psu_temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); +static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, show_linear, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE); +static SENSOR_DEVICE_ATTR(psu_fan_dir, S_IRUGO, show_ascii, NULL, PSU_FAN_DIRECTION); +static SENSOR_DEVICE_ATTR(psu_pmbus_revision, S_IRUGO, show_byte, NULL, PSU_PMBUS_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_id, S_IRUGO, show_ascii, NULL, PSU_MFR_ID); +static SENSOR_DEVICE_ATTR(psu_mfr_model, S_IRUGO, show_ascii, NULL, PSU_MFR_MODEL); +static SENSOR_DEVICE_ATTR(psu_mfr_revision, S_IRUGO, show_ascii, NULL, PSU_MFR_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_min, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_max, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_min, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_max, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iin_max, S_IRUGO, show_linear, NULL, PSU_MFR_IIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iout_max, S_IRUGO, show_linear, NULL, PSU_MFR_IOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pin_max, S_IRUGO, show_linear, NULL, PSU_MFR_PIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pout_max, S_IRUGO, show_linear, NULL, PSU_MFR_POUT_MAX); + +/*Duplicate nodes for lm-sensors.*/ +static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, show_linear, NULL, PSU_P_OUT_UV); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); +static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_word, NULL, PSU_TEMP_FAULT); + +static struct attribute *ym2651y_attributes[] = { + &sensor_dev_attr_psu_power_on.dev_attr.attr, + &sensor_dev_attr_psu_temp_fault.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, + &sensor_dev_attr_psu_over_temp.dev_attr.attr, + &sensor_dev_attr_psu_v_out.dev_attr.attr, + &sensor_dev_attr_psu_i_out.dev_attr.attr, + &sensor_dev_attr_psu_p_out.dev_attr.attr, + &sensor_dev_attr_psu_temp1_input.dev_attr.attr, + &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, + &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, + &sensor_dev_attr_psu_fan_dir.dev_attr.attr, + &sensor_dev_attr_psu_pmbus_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_id.dev_attr.attr, + &sensor_dev_attr_psu_mfr_model.dev_attr.attr, + &sensor_dev_attr_psu_mfr_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iout_max.dev_attr.attr, + /*Duplicate nodes for lm-sensors.*/ + &sensor_dev_attr_power1_input.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + NULL +}; + +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + return (attr->index == PSU_PMBUS_REVISION) ? sprintf(buf, "%d\n", data->pmbus_revision) : + sprintf(buf, "0\n"); +} + +static ssize_t show_word(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u16 status = 0; + + switch (attr->index) { + case PSU_POWER_ON: /* psu_power_on, low byte bit 6 of status_word, 0=>ON, 1=>OFF */ + status = (data->status_word & 0x40) ? 0 : 1; + break; + case PSU_TEMP_FAULT: /* psu_temp_fault, low byte bit 2 of status_word, 0=>Normal, 1=>temp fault */ + status = (data->status_word & 0x4) >> 2; + break; + case PSU_POWER_GOOD: /* psu_power_good, high byte bit 3 of status_word, 0=>OK, 1=>FAIL */ + status = (data->status_word & 0x800) ? 0 : 1; + break; + } + + return sprintf(buf, "%d\n", status); +} + +static int two_complement_to_int(u16 data, u8 valid_bit, int mask) +{ + u16 valid_data = data & mask; + bool is_negative = valid_data >> (valid_bit - 1); + + return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data; +} + +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1; + long speed; + int error; + + error = kstrtol(buf, 10, &speed); + if (error) + return error; + + if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->fan_duty_cycle[nr] = speed; + ym2651y_write_word(client, 0x3B + nr, data->fan_duty_cycle[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + u16 value = 0; + int exponent, mantissa; + int multiplier = 1000; + + switch (attr->index) { + case PSU_V_OUT: + value = data->v_out; + break; + case PSU_I_OUT: + value = data->i_out; + break; + case PSU_P_OUT_UV: + multiplier = 1000000; /*For lm-sensors, unit is micro-Volt.*/ + /*Passing through*/ + case PSU_P_OUT: + value = data->p_out; + break; + case PSU_TEMP1_INPUT: + value = data->temp; + break; + case PSU_FAN1_SPEED: + value = data->fan_speed; + multiplier = 1; + break; + case PSU_FAN1_DUTY_CYCLE: + value = data->fan_duty_cycle[0]; + multiplier = 1; + break; + case PSU_MFR_VIN_MIN: + value = data->mfr_vin_min; + break; + case PSU_MFR_VIN_MAX: + value = data->mfr_vin_max; + break; + case PSU_MFR_VOUT_MIN: + value = data->mfr_vout_min; + break; + case PSU_MFR_VOUT_MAX: + value = data->mfr_vout_max; + break; + case PSU_MFR_PIN_MAX: + value = data->mfr_pin_max; + break; + case PSU_MFR_POUT_MAX: + value = data->mfr_pout_max; + break; + case PSU_MFR_IOUT_MAX: + value = data->mfr_iout_max; + break; + case PSU_MFR_IIN_MAX: + value = data->mfr_iin_max; + break; + } + + exponent = two_complement_to_int(value >> 11, 5, 0x1f); + mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff); + return (exponent >= 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + u8 shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6; + + return sprintf(buf, "%d\n", data->fan_fault >> shift); +} + +static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct ym2651y_data *data = ym2651y_update_device(dev); + + return sprintf(buf, "%d\n", data->over_temp >> 7); +} + +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u8 *ptr = NULL; + + switch (attr->index) { + case PSU_FAN_DIRECTION: /* psu_fan_dir */ + ptr = data->fan_dir; + break; + case PSU_MFR_ID: /* psu_mfr_id */ + ptr = data->mfr_id; + break; + case PSU_MFR_MODEL: /* psu_mfr_model */ + ptr = data->mfr_model; + break; + case PSU_MFR_REVISION: /* psu_mfr_revision */ + ptr = data->mfr_revsion; + break; + default: + return 0; + } + + return sprintf(buf, "%s\n", ptr); +} + +static const struct attribute_group ym2651y_group = { + .attrs = ym2651y_attributes, +}; + +static int ym2651y_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct ym2651y_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct ym2651y_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &ym2651y_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &ym2651y_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int ym2651y_remove(struct i2c_client *client) +{ + struct ym2651y_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &ym2651y_group); + kfree(data); + + return 0; +} + +static const struct i2c_device_id ym2651y_id[] = { + { "ym2651", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ym2651y_id); + +static struct i2c_driver ym2651y_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ym2651", + }, + .probe = ym2651y_probe, + .remove = ym2651y_remove, + .id_table = ym2651y_id, + .address_list = normal_i2c, +}; + +static int ym2651y_read_byte(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int ym2651y_read_word(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_data(client, reg); +} + +static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value) +{ + return i2c_smbus_write_word_data(client, reg, value); +} + +static int ym2651y_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) + goto abort; + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + + result = 0; + +abort: + return result; +} + +struct reg_data_byte { + u8 reg; + u8 *value; +}; + +struct reg_data_word { + u8 reg; + u16 *value; +}; + +static struct ym2651y_data *ym2651y_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i, status; + u8 command; + u8 fan_dir[5] = {0}; + struct reg_data_byte regs_byte[] = { {0x19, &data->capability}, + {0x7d, &data->over_temp}, + {0x81, &data->fan_fault}, + {0x98, &data->pmbus_revision}}; + struct reg_data_word regs_word[] = { {0x79, &data->status_word}, + {0x8b, &data->v_out}, + {0x8c, &data->i_out}, + {0x96, &data->p_out}, + {0x8d, &data->temp}, + {0x3b, &(data->fan_duty_cycle[0])}, + {0x3c, &(data->fan_duty_cycle[1])}, + {0x90, &data->fan_speed}, + {0xa0, &data->mfr_vin_min}, + {0xa1, &data->mfr_vin_max}, + {0xa2, &data->mfr_iin_max}, + {0xa3, &data->mfr_pin_max}, + {0xa4, &data->mfr_vout_min}, + {0xa5, &data->mfr_vout_max}, + {0xa6, &data->mfr_iout_max}, + {0xa7, &data->mfr_pout_max}}; + + dev_dbg(&client->dev, "Starting ym2651 update\n"); + + /* Read byte data */ + for (i = 0; i < ARRAY_SIZE(regs_byte); i++) { + status = ym2651y_read_byte(client, regs_byte[i].reg); + + if (status < 0) + { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_byte[i].reg, status); + } + else { + *(regs_byte[i].value) = status; + } + } + + /* Read word data */ + for (i = 0; i < ARRAY_SIZE(regs_word); i++) { + status = ym2651y_read_word(client, regs_word[i].reg); + + if (status < 0) + { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_word[i].reg, status); + } + else { + *(regs_word[i].value) = status; + } + } + + /* Read fan_direction */ + command = 0xC3; + status = ym2651y_read_block(client, command, fan_dir, ARRAY_SIZE(fan_dir)-1); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + } + + strncpy(data->fan_dir, fan_dir+1, ARRAY_SIZE(data->fan_dir)-1); + data->fan_dir[ARRAY_SIZE(data->fan_dir)-1] = '\0'; + + /* Read mfr_id */ + command = 0x99; + status = ym2651y_read_block(client, command, data->mfr_id, + ARRAY_SIZE(data->mfr_id)-1); + data->mfr_id[ARRAY_SIZE(data->mfr_id)-1] = '\0'; + + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + + /* Read mfr_model */ + command = 0x9a; + status = ym2651y_read_block(client, command, data->mfr_model, + ARRAY_SIZE(data->mfr_model)-1); + data->mfr_model[ARRAY_SIZE(data->mfr_model)-1] = '\0'; + + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + + /* Read mfr_revsion */ + command = 0x9b; + status = ym2651y_read_block(client, command, data->mfr_revsion, + ARRAY_SIZE(data->mfr_revsion)-1); + data->mfr_revsion[ARRAY_SIZE(data->mfr_revsion)-1] = '\0'; + + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +module_i2c_driver(ym2651y_driver); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("3Y Power YM-2651Y driver"); +MODULE_LICENSE("GPL"); + + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/service/as7716-platform-monitor.service b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/service/as7716-platform-monitor.service new file mode 100755 index 000000000000..b1428d7844f8 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/service/as7716-platform-monitor.service @@ -0,0 +1,17 @@ +[Unit] +Description=Accton AS7716-32X Platform Monitoring service +Before=pmon.service +After=sysinit.target +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/local/bin/accton_as7716_util.py install +ExecStart=/usr/local/bin/accton_as7716_monitor.py +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/setup.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/setup.py new file mode 100755 index 000000000000..7a3d784d326e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/setup.py @@ -0,0 +1,16 @@ +#!/usr/bin/env python + +import os +import sys +from setuptools import setup +os.listdir + +setup( + name='as7716_32x', + version='1.0', + description='Module to initialize Accton AS7716-32X platforms', + + packages=['as7716_32x'], + package_dir={'as7716_32x': 'as7716-32x/classes'}, +) + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/README b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/README new file mode 100755 index 000000000000..44e03cab5f52 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/README @@ -0,0 +1,117 @@ +Copyright (C) 2016 Accton Networks, Inc. + +This program is free software: you can redistribute it and/or modify +It under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +Contents of this package: + patch - files under patch/ is for kernel and ONIE installer + for the kernel: + config-accton-as5712_54x.patch + for kernel configuration. + driver-i2c-muxes-pca954x-always-deselect.patch + for i2c_mux deselects after transaction. + driver-patches-for-accton-as5712-fan-psu-cpld.patch + for as5712's fan/psu/cpld/led/sfp drivers. + for ONIE: + onie_installer-accton-AS5712-54X.patch + for console port setting and copy util script o rootfs. + module - Contains source code of as5712 kernel driver modules. + +The late Sonic building scripts, pushed @Dec 5 2016, will automatically +create a docker container and run building process under it. +User is not necessary to handle docker environment creation. + +1. Download sonic-buildimage environment. + - Run "git clone https://github.com/Azure/sonic-buildimage". + - cd to sonic-buildimage and run "git submodule update --init --recursive". +2. Build kernel + - cd ./src/sonic-linux-kernel + - Copy patches and series from patch/kernel of this release to + sonic-linux-kernel/patch. + - Build kernel by "make". + - The built kernel package, linux-image-3.16.0-5-amd64_3.16.51-3+deb8u1_amd64.deb + , is generated. +3. Build installer + - Change directory back to sonic-buildimage/. + - Get onie_installer-accton-AS5712-54X.patch" from patch/installer. + - Change setting for AS5712-54X by patching build_image.sh. + "patch -p1 < onie_installer-accton-AS5712-54X.patch" + !!NOTICE, patching onie_installer-accton-AS5712-54X.patch comments out the + "git status" checking at build_image.sh. + - The account and password of installed OS can be given at rules/config. + The default user and password are "admin" & "YourPaSsWoRd" respectively. + - Run "make configure PLATFORM=broadcom" + - Copy the built kernel debian package to target/debs/. + The file is linux-image-3.16.0-5-amd64_*_amd64.deb under directory + src/sonic-linux-kernel/. + - Run "make target/sonic-generic.bin" + - Get the installer, target/sonic-generic.bin, to target machine and install. + +All Linux kernel code is licensed under the GPLv1. All other code is +licensed under the GPLv3. Please see the LICENSE file for copies of +both licenses. + +The code for integacting with Accton AS5712-54X has 2 parts, +kernel drivers and operational script. +The kernel drivers of peripherals are under module/ directory. +1. These drivers are patched into kernel by + driver-patches-for-accton-as5712-fan-psu-cpld.patch + Or you can build the driver under module/ by setting environment variable, + KERNEL_SRC, to proper linux built directory and run make. + It may be sonic-linux-kernel/linux-3.*/debian/build/build_amd64_none_amd64/. +2. A operational script, accton_as5712_util.py, for device initializatian and + peripheral accessing should be installed at /usr/bin. + This script is generated by onie_installer-accton-AS5712-54X.patch. + It's done by patching onie_installer-accton-AS5712-54X.patch at build-image. + Run "accton_as5712_util.py install" to install drivers. + +To initialize the system, run "accton_as5712_util.py install". +To clean up the drivers & devices, run "accton_as5712_util.py clean". +To dump information of sensors, run "accton_as5712_util.py show". +To dump SFP EEPROM, run "accton_as5712_util.py sff". +To set fan speed, run "accton_as5712_util.py set fan". +To enable/disable SFP emission, run "accton_as5712_util.py set sfp". +To set system LEDs' color, run "accton_as5712_util.py set led" +For more information, run "accton_as5712_util.py --help". + +==================================================================== +Besides applying accton_as5712_util.py to access peripherals, you can +access peripherals by sysfs nodes directly after the installation is run. + +System LED: + There are 5 system LEDs at the lower-left corner of front panel. + They are loc, diag, fan, ps1, and ps2. + The sysfs interface color mappings are as follows: + Brightness: + 0 => off + 1 => green + 2 => amber + 3 => red + 4 => blue + But not all colors are available for each LED. + +Fan Control: + There are 10 fans inside 5 fan modules. + All fans share 1 duty setting, ranged from 0~100. + +Thermal sensers: + 3 temperature sensors are controlled by the lm75 kernel modules. + +PSUs: + There 2 power supplies slot at the left/right side of the back. + Once if a PSU is not plugged, the status of it is shown failed. + +There are 48 SFP+ and 6 QSFP modules are equipped. +Before operating on PSU and QSFP+, please make sure it is well plugged. +Otherwise, operation is going to fail. + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/accton_as7716_monitor.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/accton_as7716_monitor.py new file mode 100755 index 000000000000..63f26d5d2ef6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/accton_as7716_monitor.py @@ -0,0 +1,207 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018: Jostar modify for as7716_32 +# ------------------------------------------------------------------ + +try: + import os + import sys, getopt + import subprocess + import click + import imp + import logging + import logging.config + import types + import time # this is only being used as part of the example + import traceback + from tabulate import tabulate + from as7716_32x.fanutil import FanUtil + from as7716_32x.thermalutil import ThermalUtil +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +# Deafults +VERSION = '1.0' +FUNCTION_NAME = 'accton_as7716_monitor' + +global log_file +global log_level + + # For AC power Front to Back : + # If any fan fail, please fan speed register to 15 + # The max value of Fan speed register is 9 + # [LM75(48) + LM75(49) + LM75(4A)] > 174 => set Fan speed value from 4 to 5 + # [LM75(48) + LM75(49) + LM75(4A)] > 182 => set Fan speed value from 5 to 7 + # [LM75(48) + LM75(49) + LM75(4A)] > 190 => set Fan speed value from 7 to 9 + # + # [LM75(48) + LM75(49) + LM75(4A)] < 170 => set Fan speed value from 5 to 4 + # [LM75(48) + LM75(49) + LM75(4A)] < 178 => set Fan speed value from 7 to 5 + # [LM75(48) + LM75(49) + LM75(4A)] < 186 => set Fan speed value from 9 to 7 + # + # + # For AC power Back to Front : + # If any fan fail, please fan speed register to 15 + # The max value of Fan speed register is 10 + # [LM75(48) + LM75(49) + LM75(4A)] > 140 => set Fan speed value from 4 to 5 + # [LM75(48) + LM75(49) + LM75(4A)] > 150 => set Fan speed value from 5 to 7 + # [LM75(48) + LM75(49) + LM75(4A)] > 160 => set Fan speed value from 7 to 10 + # + # [LM75(48) + LM75(49) + LM75(4A)] < 135 => set Fan speed value from 5 to 4 + # [LM75(48) + LM75(49) + LM75(4A)] < 145 => set Fan speed value from 7 to 5 + # [LM75(48) + LM75(49) + LM75(4A)] < 155 => set Fan speed value from 10 to 7 + # + + + # 2.If no matched fan speed is found from the policy, + # use FAN_DUTY_CYCLE_MIN as default speed + # Get current temperature + # 4.Decision 3: Decide new fan speed depend on fan direction/current fan speed/temperature + + + + +# Make a class we can use to capture stdout and sterr in the log +class accton_as7716_monitor(object): + # static temp var + _ori_temp = 0 + _new_perc = 0 + _ori_perc = 0 + + def __init__(self, log_file, log_level): + """Needs a logger and a logger level.""" + # set up logging to file + logging.basicConfig( + filename=log_file, + filemode='w', + level=log_level, + format= '[%(asctime)s] {%(pathname)s:%(lineno)d} %(levelname)s - %(message)s', + datefmt='%H:%M:%S' + ) + + # set up logging to console + if log_level == logging.DEBUG: + console = logging.StreamHandler() + console.setLevel(log_level) + formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') + console.setFormatter(formatter) + logging.getLogger('').addHandler(console) + + logging.debug('SET. logfile:%s / loglevel:%d', log_file, log_level) + + def manage_fans(self): + + fan_policy_f2b = { + 0: [32, 0, 174000], + 1: [38, 170000, 182000], + 2: [50, 178000, 190000], + 3: [63, 186000, 0], + } + fan_policy_b2f = { + 0: [32, 0, 140000], + 1: [38, 135000, 150000], + 2: [50, 145000, 160000], + 3: [69, 15500, 0], + } + + thermal = ThermalUtil() + fan = FanUtil() + get_temp = thermal.get_thermal_temp() + + cur_duty_cycle = fan.get_fan_duty_cycle() + + for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): + fan_status = fan.get_fan_status(x) + if fan_status is None: + logging.debug('INFO. SET new_perc to %d (FAN stauts is None. fan_num:%d)', 100, x) + return False + if fan_status is False: + logging.debug('INFO. SET new_perc to %d (FAN fault. fan_num:%d)', 100, x) + fan.set_fan_duty_cycle(45) + return True + logging.debug('INFO. fan_status is True (fan_num:%d)', x) + + if fan_status is not None and fan_status is not False: + fan_dir=fan.get_fan_dir(1) + for x in range(0, 4): + if cur_duty_cycle == fan_policy_f2b[x][0]: + break + + if fan_dir == 1: + if x == 4 : + fan.set_fan_duty_cycle(fan_policy_f2b[0][0]) + new_duty_cycle=cur_duty_cycle + # if temp > up_levle, else if temp < down_level + if get_temp > fan_policy_f2b[x][2] and x != 3 : + new_duty_cycle= fan_policy_f2b[x+1][0] + logging.debug('INFO. THERMAL temp UP, temp %d > %d , new_duty_cycle=%d', get_temp, fan_policy_f2b[x][2], new_duty_cycle) + elif get_temp < fan_policy_f2b[x][1] : + new_duty_cycle= fan_policy_f2b[x-1][0] + logging.debug('INFO. THERMAL temp down, temp %d < %d , new_duty_cycle=%d', get_temp, fan_policy_f2b[x][1], new_duty_cycle) + if new_duty_cycle == cur_duty_cycle : + return True + else: + if x == 4 : + fan.set_fan_duty_cycle(fan_policy_b2f[0][0]) + new_duty_cycle=cur_duty_cycle + # if temp > up_levle, else if temp < down_level + if get_temp > fan_policy_b2f[x][1] and x != 3 : + new_duty_cycle= fan_policy_b2f[x+1][0] + logging.debug('INFO. THERMAL temp UP, temp %d > %d , new_duty_cycle=%d', get_temp, fan_policy_b2f[x][2], new_duty_cycle) + elif get_temp < fan_policy_b2f[x][0] and x != 0 : + new_duty_cycle= fan_policy_b2f[x-1][0] + logging.debug('INFO. THERMAL temp down, temp %d < %d , new_duty_cycle=%d', get_temp, fan_policy_b2f[x][1], new_duty_cycle) + if new_duty_cycle == cur_duty_cycle : + return True + + fan.set_fan_duty_cycle(new_duty_cycle) + + return True + + + +def main(argv): + log_file = '%s.log' % FUNCTION_NAME + log_level = logging.INFO + if len(sys.argv) != 1: + try: + opts, args = getopt.getopt(argv,'hdl:',['lfile=']) + except getopt.GetoptError: + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + for opt, arg in opts: + if opt == '-h': + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + elif opt in ('-d', '--debug'): + log_level = logging.DEBUG + elif opt in ('-l', '--lfile'): + log_file = arg + + monitor = accton_as7716_monitor(log_file, log_level) + + # Loop forever, doing something useful hopefully: + while True: + monitor.manage_fans() + time.sleep(1) + +if __name__ == '__main__': + main(sys.argv[1:]) diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/accton_as7716_util.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/accton_as7716_util.py new file mode 100755 index 000000000000..cd35b50d200e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32x/utils/accton_as7716_util.py @@ -0,0 +1,595 @@ +#!/usr/bin/env python +# +# Copyright (C) 2016 Accton Networks, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes + show : show all systen status + sff : dump SFP eeprom + set : change board setting with fan|led|sfp +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + +PROJECT_NAME = 'as7716_32x' +version = '0.0.1' +verbose = False +DEBUG = False +args = [] +ALL_DEVICE = {} +DEVICE_NO = {'led':5, 'fan1':1, 'fan2':1,'fan3':1,'fan4':1,'fan5':1,'thermal':3, 'psu':2, 'sfp':54} + + +led_prefix ='/sys/devices/platform/as7716_32x_led/leds/accton_'+PROJECT_NAME+'_led::' +fan_prefix ='/sys/devices/platform/as7716_32x_' +hwmon_types = {'led': ['diag','fan','loc','psu1','psu2'], + 'fan1': ['fan'], + 'fan2': ['fan'], + 'fan3': ['fan'], + 'fan4': ['fan'], + 'fan5': ['fan'], + 'fan5': ['fan'], + } +hwmon_nodes = {'led': ['brightness'] , + 'fan1': ['fan_duty_cycle_percentage', 'fan1_fault', 'fan1_speed_rpm', 'fan1_direction', 'fanr1_fault', 'fanr1_speed_rpm'], + 'fan2': ['fan_duty_cycle_percentage','fan2_fault', 'fan2_speed_rpm', 'fan2_direction', 'fanr2_fault', 'fanr2_speed_rpm'], + 'fan3': ['fan_duty_cycle_percentage','fan3_fault', 'fan3_speed_rpm', 'fan3_direction', 'fanr3_fault', 'fanr3_speed_rpm'], + 'fan4': ['fan4_duty_cycle_percentage','fan4_fault', 'fan4_speed_rpm', 'fan4_direction', 'fanr4_fault', 'fanr4_speed_rpm'], + 'fan5': ['fan_duty_cycle_percentage','fan5_fault', 'fan5_speed_rpm', 'fan5_direction', 'fanr5_fault', 'fanr5_speed_rpm'], + } +hwmon_prefix ={'led': led_prefix, + 'fan1': fan_prefix, + 'fan2': fan_prefix, + 'fan3': fan_prefix, + 'fan4': fan_prefix, + 'fan5': fan_prefix, + } + +i2c_prefix = '/sys/bus/i2c/devices/' +i2c_bus = {'thermal': ['10-0048','10-0049', '10-004a'] , + 'psu': ['17-0050','18-0053'], + 'sfp': ['-0050']} +i2c_nodes = { + 'thermal': ['hwmon/hwmon*/temp1_input'] , + 'psu': ['psu_present ', 'psu_power_good'] , + 'sfp': ['sfp_is_present ', 'sfp_tx_disable']} + +sfp_map = [29, 30, 31, 32, 34, 33, 36, 35, + 25, 26, 27, 28, 37, 38, 39, 40, + 41, 42, 43, 44, 53, 54, 55, 56, + 45, 46, 47, 48, 49, 50, 51, 52] + +mknod =[ +'echo pca9548 0x77 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo as7716_32x_fan 0x66 > /sys/bus/i2c/devices/i2c-9/new_device', + +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-10/new_device', + +'echo as7716_32x_cpld1 0x60 > /sys/bus/i2c/devices/i2c-11/new_device', +'echo accton_i2c_cpld 0x62 > /sys/bus/i2c/devices/i2c-12/new_device', +'echo accton_i2c_cpld 0x64 > /sys/bus/i2c/devices/i2c-13/new_device', + +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x74 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x75 > /sys/bus/i2c/devices/i2c-2/new_device', + +# PSU-1 +'echo as7716_32x_psu1 0x53 > /sys/bus/i2c/devices/i2c-18/new_device', +'echo ym2651 0x5b > /sys/bus/i2c/devices/i2c-18/new_device', + +# PSU-2 +'echo as7716_32x_psu2 0x50> /sys/bus/i2c/devices/i2c-17/new_device', +'echo ym2651 0x58 > /sys/bus/i2c/devices/i2c-17/new_device', + + + +#EERPOM +'echo 24c02 0x56 > /sys/bus/i2c/devices/i2c-1/new_device', +] + +mknod2 =[ +'echo as7716_32x_cpld1 0x60 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo accton_i2c_cpld 0x61 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo accton_i2c_cpld 0x62 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-0/new_device', + +# PSU-1 +'echo as7716_32x_psu1 0x38 > /sys/bus/i2c/devices/i2c-57/new_device', +'echo cpr_4011_4mxx 0x3c > /sys/bus/i2c/devices/i2c-57/new_device', +'echo as7716_32x_psu1 0x50 > /sys/bus/i2c/devices/i2c-57/new_device', +'echo ym2401 0x58 > /sys/bus/i2c/devices/i2c-57/new_device', + +# PSU-2 +'echo as7716_32x_psu2 0x3b > /sys/bus/i2c/devices/i2c-58/new_device', +'echo cpr_4011_4mxx 0x3f > /sys/bus/i2c/devices/i2c-58/new_device', +'echo as7716_32x_psu2 0x53 > /sys/bus/i2c/devices/i2c-58/new_device', +'echo ym2401 0x5b > /sys/bus/i2c/devices/i2c-58/new_device', + +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-61/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-62/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-63/new_device', + +#EERPOM +'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-1/new_device', +] + +FORCE = 0 +logging.basicConfig(filename= PROJECT_NAME+'.log', filemode='w',level=logging.DEBUG) +logging.basicConfig(level=logging.INFO) + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + do_install() + elif arg == 'clean': + do_uninstall() + elif arg == 'show': + device_traversal() + elif arg == 'sff': + if len(args)!=2: + show_eeprom_help() + elif int(args[1]) ==0 or int(args[1]) > DEVICE_NO['sfp']: + show_eeprom_help() + else: + show_eeprom(args[1]) + return + elif arg == 'set': + if len(args)<3: + show_set_help() + else: + set_device(args[1:]) + return + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_set_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print cmd +" [led|sfp|fan]" + print " use \""+ cmd + " led 0-4 \" to set led color" + print " use \""+ cmd + " fan 0-100\" to set fan duty percetage" + print " use \""+ cmd + " sfp 1-32 {0|1}\" to set sfp# tx_disable" + sys.exit(0) + +def show_eeprom_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print " use \""+ cmd + " 1-32 \" to dump sfp# eeprom" + sys.exit(0) + +def my_log(txt): + if DEBUG == True: + print "[ACCTON DBG]: "+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status = 1 + output = "" + status, output = commands.getstatusoutput(cmd) + my_log (cmd +"with result:" + str(status)) + my_log ("cmd:" + cmd) + my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +def driver_inserted(): + ret, lsmod = log_os_system("lsmod| grep accton", 0) + logging.info('mods:'+lsmod) + if len(lsmod) ==0: + return False + +#'modprobe cpr_4011_4mxx', + +kos = [ +'depmod -ae', +'modprobe i2c_dev', +'modprobe i2c_mux_pca954x', +'modprobe accton_i2c_cpld', +'modprobe cpr_4011_4mxx', +'modprobe ym2651y', +'modprobe accton_as7716_32x_cpld1', +'modprobe accton_as7716_32x_fan', +'modprobe accton_as7716_32x_leds', +'modprobe accton_as7716_32x_psu'] + +def driver_install(): + global FORCE + for i in range(0,len(kos)): + status, output = log_os_system(kos[i], 1) + if status: + if FORCE == 0: + return status + return 0 + +def driver_uninstall(): + global FORCE + for i in range(0,len(kos)): + rm = kos[-(i+1)].replace("modprobe", "modprobe -rq") + rm = rm.replace("insmod", "rmmod") + status, output = log_os_system(rm, 1) + if status: + if FORCE == 0: + return status + return 0 + + + +def i2c_order_check(): + # i2c bus 0 and 1 might be installed in different order. + # Here check if 0x76 is exist @ i2c-0 + tmp = "echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-1/new_device" + status, output = log_os_system(tmp, 0) + if not device_exist(): + order = 1 + else: + order = 0 + tmp = "echo 0x70 > /sys/bus/i2c/devices/i2c-1/delete_device" + status, output = log_os_system(tmp, 0) + return order + +def device_install(): + global FORCE + + for i in range(0,len(mknod)): + #for pca932x need times to built new i2c buses + if mknod[i].find('pca954') != -1: + time.sleep(2) + + status, output = log_os_system(mknod[i], 1) + if status: + print output + if FORCE == 0: + return status + + for i in range(0,len(sfp_map)): + status, output =log_os_system("echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + status, output =log_os_system("echo port"+str(i)+" > /sys/bus/i2c/devices/"+str(sfp_map[i])+"-0050/port_name", 1) + if status: + print output + if FORCE == 0: + return status + return + +def device_uninstall(): + global FORCE + + status, output =log_os_system("ls /sys/bus/i2c/devices/0-0070", 0) + if status==0: + I2C_ORDER=1 + else: + I2C_ORDER=0 + + for i in range(0,len(sfp_map)): + target = "/sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/delete_device" + status, output =log_os_system("echo 0x50 > "+ target, 1) + if status: + print output + if FORCE == 0: + return status + + if I2C_ORDER==0: + nodelist = mknod + else: + nodelist = mknod2 + + for i in range(len(nodelist)): + target = nodelist[-(i+1)] + temp = target.split() + del temp[1] + temp[-1] = temp[-1].replace('new_device', 'delete_device') + status, output = log_os_system(" ".join(temp), 1) + if status: + print output + if FORCE == 0: + return status + + return + +def system_ready(): + if driver_inserted() == False: + return False + if not device_exist(): + print "not device_exist()" + return False + return True + +def do_install(): + if driver_inserted() == False: + status = driver_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" drivers detected...." + if not device_exist(): + status = device_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" devices detected...." + return + +def do_uninstall(): + if not device_exist(): + print PROJECT_NAME.upper() +" has no device installed...." + else: + print "Removing device...." + status = device_uninstall() + if status: + if FORCE == 0: + return status + + if driver_inserted()== False : + print PROJECT_NAME.upper() +" has no driver installed...." + else: + print "Removing installed driver...." + status = driver_uninstall() + if status: + if FORCE == 0: + return status + + return + +def devices_info(): + global DEVICE_NO + global ALL_DEVICE + global i2c_bus, hwmon_types + for key in DEVICE_NO: + ALL_DEVICE[key]= {} + for i in range(0,DEVICE_NO[key]): + ALL_DEVICE[key][key+str(i+1)] = [] + + for key in i2c_bus: + buses = i2c_bus[key] + nodes = i2c_nodes[key] + for i in range(0,len(buses)): + for j in range(0,len(nodes)): + if 'fan' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ buses[i]+"/fan"+str(k+1)+"_"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + elif 'sfp' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ str(sfp_map[k])+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + else: + node = key+str(i+1) + path = i2c_prefix+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + + for key in hwmon_types: + itypes = hwmon_types[key] + nodes = hwmon_nodes[key] + for i in range(0,len(itypes)): + for j in range(0,len(nodes)): + node = key+"_"+itypes[i] + path = hwmon_prefix[key]+ itypes[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][ key+str(i+1)].append(path) + + #show dict all in the order + if DEBUG == True: + for i in sorted(ALL_DEVICE.keys()): + print(i+": ") + for j in sorted(ALL_DEVICE[i].keys()): + print(" "+j) + for k in (ALL_DEVICE[i][j]): + print(" "+" "+k) + return + +def show_eeprom(index): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + node = ALL_DEVICE['sfp'] ['sfp'+str(index)][0] + node = node.replace(node.split("/")[-1], 'sfp_eeprom') + # check if got hexdump command in current environment + ret, log = log_os_system("which hexdump", 0) + ret, log2 = log_os_system("which busybox hexdump", 0) + if len(log): + hex_cmd = 'hexdump' + elif len(log2): + hex_cmd = ' busybox hexdump' + else: + log = 'Failed : no hexdump cmd!!' + logging.info(log) + print log + return 1 + + print node + ":" + ret, log = log_os_system("cat "+node+"| "+hex_cmd+" -C", 1) + if ret==0: + print log + else: + print "**********device no found**********" + return + +def set_device(args): + global DEVICE_NO + global ALL_DEVICE + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + + if args[0]=='led': + if int(args[1])>4: + show_set_help() + return + #print ALL_DEVICE['led'] + for i in range(0,len(ALL_DEVICE['led'])): + for k in (ALL_DEVICE['led']['led'+str(i+1)]): + ret, log = log_os_system("echo "+args[1]+" >"+k, 1) + if ret: + return ret + elif args[0]=='fan': + if int(args[1])>100: + show_set_help() + return + #print ALL_DEVICE['fan'] + #fan1~6 is all fine, all fan share same setting + node = ALL_DEVICE['fan1'] ['fan11'][0] + node = node.replace(node.split("/")[-1], 'fan1_duty_cycle_percentage') + ret, log = log_os_system("cat "+ node, 1) + if ret==0: + print ("Previous fan duty: " + log.strip() +"%") + ret, log = log_os_system("echo "+args[1]+" >"+node, 1) + if ret==0: + print ("Current fan duty: " + args[1] +"%") + return ret + elif args[0]=='sfp': + if int(args[1])> DEVICE_NO[args[0]] or int(args[1])==0: + show_set_help() + return + if len(args)<2: + show_set_help() + return + + if int(args[2])>1: + show_set_help() + return + + #print ALL_DEVICE[args[0]] + for i in range(0,len(ALL_DEVICE[args[0]])): + for j in ALL_DEVICE[args[0]][args[0]+str(args[1])]: + if j.find('tx_disable')!= -1: + ret, log = log_os_system("echo "+args[2]+" >"+ j, 1) + if ret: + return ret + + return + +#get digits inside a string. +#Ex: 31 for "sfp31" +def get_value(input): + digit = re.findall('\d+', input) + return int(digit[0]) + +def device_traversal(): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + for i in sorted(ALL_DEVICE.keys()): + print("============================================") + print(i.upper()+": ") + print("============================================") + + for j in sorted(ALL_DEVICE[i].keys(), key=get_value): + print " "+j+":", + for k in (ALL_DEVICE[i][j]): + ret, log = log_os_system("cat "+k, 0) + func = k.split("/")[-1].strip() + func = re.sub(j+'_','',func,1) + func = re.sub(i.lower()+'_','',func,1) + if ret==0: + print func+"="+log+" ", + else: + print func+"="+"X"+" ", + print + print("----------------------------------------------------------------") + + + print + return + +def device_exist(): + ret1, log = log_os_system("ls "+i2c_prefix+"*0077", 0) + ret2, log = log_os_system("ls "+i2c_prefix+"i2c-2", 0) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/__init__.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/__init__.py new file mode 100755 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/fanutil.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/fanutil.py new file mode 100755 index 000000000000..e001e94092c7 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/fanutil.py @@ -0,0 +1,263 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018: Jostar modify for as7716_32 +# ------------------------------------------------------------------ + +try: + import time + import logging + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class FanUtil(object): + """Platform-specific FanUtil class""" + + FAN_NUM_ON_MAIN_BROAD = 6 + FAN_NUM_1_IDX = 1 + FAN_NUM_2_IDX = 2 + FAN_NUM_3_IDX = 3 + FAN_NUM_4_IDX = 4 + FAN_NUM_5_IDX = 5 + FAN_NUM_6_IDX = 6 + + FAN_NODE_NUM_OF_MAP = 2 + FAN_NODE_FAULT_IDX_OF_MAP = 1 + #FAN_NODE_SPEED_IDX_OF_MAP = 2 + FAN_NODE_DIR_IDX_OF_MAP = 2 + #FAN_NODE_DUTY_IDX_OF_MAP = 4 + #FANR_NODE_FAULT_IDX_OF_MAP = 5 + + #BASE_VAL_PATH = '/sys/devices/platform/as5712_54x_fan/{0}' + BASE_VAL_PATH = '/sys/bus/i2c/devices/9-0066/{0}' + FAN_DUTY_PATH = '/sys/bus/i2c/devices/9-0066/fan_duty_cycle_percentage' + + #logfile = '' + #loglevel = logging.INFO + + """ Dictionary where + key1 = fan id index (integer) starting from 1 + key2 = fan node index (interger) starting from 1 + value = path to fan device file (string) """ + _fan_to_device_path_mapping = {} + +#fan1_direction +#fan1_fault +#fan1_present + + #(FAN_NUM_2_IDX, FAN_NODE_DUTY_IDX_OF_MAP): 'fan2_duty_cycle_percentage', + _fan_to_device_node_mapping = { + (FAN_NUM_1_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan1_fault', + (FAN_NUM_1_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan1_direction', + + (FAN_NUM_2_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan2_fault', + (FAN_NUM_2_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan2_direction', + + (FAN_NUM_3_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan3_fault', + (FAN_NUM_3_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan3_direction', + + (FAN_NUM_4_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan4_fault', + (FAN_NUM_4_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan4_direction', + + (FAN_NUM_5_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan5_fault', + (FAN_NUM_5_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan5_direction', + + (FAN_NUM_6_IDX, FAN_NODE_FAULT_IDX_OF_MAP): 'fan6_fault', + (FAN_NUM_6_IDX, FAN_NODE_DIR_IDX_OF_MAP): 'fan6_direction', + } + + def _get_fan_to_device_node(self, fan_num, node_num): + return self._fan_to_device_node_mapping[(fan_num, node_num)] + + def _get_fan_node_val(self, fan_num, node_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + + try: + val_file = open(device_path, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + #print "fan_num=%d" %fan_num + #print "node_num=%d" %node_num + #print "device_path=%s" %device_path + #print "content=%s" %content + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + def _set_fan_node_val(self, fan_num, node_num, val): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num:%d', fan_num) + return None + + if node_num < self.FAN_NODE_FAULT_IDX_OF_MAP or node_num > self.FAN_NODE_NUM_OF_MAP: + logging.debug('GET. Parameter error. node_num:%d', node_num) + return None + + content = str(val) + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + device_path = self.get_fan_to_device_path(fan_num, node_num) + try: + val_file = open(device_path, 'w') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + val_file.write(content) + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return True + + def __init__(self): + fan_path = self.BASE_VAL_PATH + + for fan_num in range(self.FAN_NUM_1_IDX, self.FAN_NUM_ON_MAIN_BROAD+1): + for node_num in range(self.FAN_NODE_FAULT_IDX_OF_MAP, self.FAN_NODE_NUM_OF_MAP+1): + self._fan_to_device_path_mapping[(fan_num, node_num)] = fan_path.format( + self._fan_to_device_node_mapping[(fan_num, node_num)]) + #self._fan_to_device_path_mapping[(fan_num, node_num)] = fan_path + self._fan_to_device_node_mapping[(fan_num, node_num)]) + #print "fan_num=%d" %fan_num + #print "node_num=%d" %node_num + #print "self._fan_to_device_path_mapping[(fan_num, node_num)]=%s" %self._fan_to_device_path_mapping[(fan_num, node_num)] + + def get_num_fans(self): + return self.FAN_NUM_ON_MAIN_BROAD + + def get_idx_fan_start(self): + return self.FAN_NUM_1_IDX + + def get_num_nodes(self): + return self.FAN_NODE_NUM_OF_MAP + + def get_idx_node_start(self): + return self.FAN_NODE_FAULT_IDX_OF_MAP + + def get_size_node_map(self): + return len(self._fan_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._fan_to_device_path_mapping) + + def get_fan_to_device_path(self, fan_num, node_num): + return self._fan_to_device_path_mapping[(fan_num, node_num)] + + def get_fan_fault(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_FAULT_IDX_OF_MAP) + + #def get_fan_speed(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FAN_NODE_SPEED_IDX_OF_MAP) + + def get_fan_dir(self, fan_num): + return self._get_fan_node_val(fan_num, self.FAN_NODE_DIR_IDX_OF_MAP) + + def get_fan_duty_cycle(self): + #duty_path = self.FAN_DUTY_PATH + try: + val_file = open(self.FAN_DUTY_PATH) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = val_file.readline().rstrip() + val_file.close() + + return int(content) + #self._get_fan_node_val(fan_num, self.FAN_NODE_DUTY_IDX_OF_MAP) +#static u32 reg_val_to_duty_cycle(u8 reg_val) +#{ +# reg_val &= FAN_DUTY_CYCLE_REG_MASK; +# return ((u32)(reg_val+1) * 625 + 75)/ 100; +#} +# + def set_fan_duty_cycle(self, val): + + try: + fan_file = open(self.FAN_DUTY_PATH, 'r+') + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + #val = ((val + 1 ) * 625 +75 ) / 100 + fan_file.write(str(val)) + fan_file.close() + return True + + #def get_fanr_fault(self, fan_num): + # return self._get_fan_node_val(fan_num, self.FANR_NODE_FAULT_IDX_OF_MAP) + + def get_fanr_speed(self, fan_num): + return self._get_fan_node_val(fan_num, self.FANR_NODE_SPEED_IDX_OF_MAP) + + def get_fan_status(self, fan_num): + if fan_num < self.FAN_NUM_1_IDX or fan_num > self.FAN_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. fan_num, %d', fan_num) + print "fan %d return none" %fan_num + return None + + if self.get_fan_fault(fan_num) is not None and self.get_fan_fault(fan_num) > 0: + logging.debug('GET. FAN fault. fan_num, %d', fan_num) + return False + + #if self.get_fanr_fault(fan_num) is not None and self.get_fanr_fault(fan_num) > 0: + # logging.debug('GET. FANR fault. fan_num, %d', fan_num) + # return False + + return True + +#def main(): +# fan = FanUtil() +# +# print 'get_size_node_map : %d' % fan.get_size_node_map() +# print 'get_size_path_map : %d' % fan.get_size_path_map() +# for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): +# for y in range(fan.get_idx_node_start(), fan.get_num_nodes()+1): +# print fan.get_fan_to_device_path(x, y) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/thermalutil.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/thermalutil.py new file mode 100755 index 000000000000..d3feda8faad9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/classes/thermalutil.py @@ -0,0 +1,124 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018:Jostar modify for as7716_32x +# ------------------------------------------------------------------ + +try: + import time + import logging + import glob + from collections import namedtuple +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + + +class ThermalUtil(object): + """Platform-specific ThermalUtil class""" + + THERMAL_NUM_ON_MAIN_BROAD = 3 + THERMAL_NUM_1_IDX = 1 # 1_ON_MAIN_BROAD + THERMAL_NUM_2_IDX = 2 # 2_ON_MAIN_BROAD + THERMAL_NUM_3_IDX = 3 # 3_ON_MAIN_BROAD + + BASE_VAL_PATH = '/sys/bus/i2c/devices/{0}-00{1}/hwmon/hwmon*/temp1_input' + + """ Dictionary where + key1 = thermal id index (integer) starting from 1 + value = path to fan device file (string) """ + _thermal_to_device_path_mapping = {} + + _thermal_to_device_node_mapping = { + THERMAL_NUM_1_IDX: ['10', '48'], + THERMAL_NUM_2_IDX: ['10', '49'], + THERMAL_NUM_3_IDX: ['10', '4a'], + } + + def __init__(self): + thermal_path = self.BASE_VAL_PATH + + for x in range(self.THERMAL_NUM_1_IDX, self.THERMAL_NUM_ON_MAIN_BROAD+1): + self._thermal_to_device_path_mapping[x] = thermal_path.format( + self._thermal_to_device_node_mapping[x][0], + self._thermal_to_device_node_mapping[x][1]) + #print "self._thermal_to_device_path_mapping[x]=%s" %self._thermal_to_device_path_mapping[x] + + def _get_thermal_node_val(self, thermal_num): + if thermal_num < self.THERMAL_NUM_1_IDX or thermal_num > self.THERMAL_NUM_ON_MAIN_BROAD: + logging.debug('GET. Parameter error. thermal_num, %d', thermal_num) + return None + + device_path = self.get_thermal_to_device_path(thermal_num) + for filename in glob.glob(device_path): + try: + val_file = open(filename, 'r') + except IOError as e: + logging.error('GET. unable to open file: %s', str(e)) + return None + + content = val_file.readline().rstrip() + + if content == '': + logging.debug('GET. content is NULL. device_path:%s', device_path) + return None + + try: + val_file.close() + except: + logging.debug('GET. unable to close file. device_path:%s', device_path) + return None + + return int(content) + + + def get_num_thermals(self): + return self.THERMAL_NUM_ON_MAIN_BROAD + + def get_idx_thermal_start(self): + return self.THERMAL_NUM_1_IDX + + def get_size_node_map(self): + return len(self._thermal_to_device_node_mapping) + + def get_size_path_map(self): + return len(self._thermal_to_device_path_mapping) + + def get_thermal_to_device_path(self, thermal_num): + return self._thermal_to_device_path_mapping[thermal_num] + + def get_thermal_1_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + + def get_thermal_2_val(self): + return self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) + def get_thermal_temp(self): + return (self._get_thermal_node_val(self.THERMAL_NUM_1_IDX) + self._get_thermal_node_val(self.THERMAL_NUM_2_IDX) +self._get_thermal_node_val(self.THERMAL_NUM_3_IDX)) + +#def main(): +# thermal = ThermalUtil() +# +# print 'get_size_node_map : %d' % thermal.get_size_node_map() +# print 'get_size_path_map : %d' % thermal.get_size_path_map() +# for x in range(thermal.get_idx_thermal_start(), thermal.get_num_thermals()+1): +# print thermal.get_thermal_to_device_path(x) +# +#if __name__ == '__main__': +# main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/Makefile b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/Makefile new file mode 100755 index 000000000000..3dfb021a7aaf --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/Makefile @@ -0,0 +1,17 @@ +ifneq ($(KERNELRELEASE),) +obj-m:= accton_as7716_32xb_cpld1.o accton_as7716_32xb_fan.o \ + accton_as7716_32xb_leds.o accton_as7716_32xb_psu.o \ + accton_as7716_32xb_thermal.o accton_as7716_32xb_oom.o accton_as7716_32xb_pmbus.o\ + accton_as7716_32xb_sys.o accton_i2c_cpld.o +else +ifeq (,$(KERNEL_SRC)) +$(error KERNEL_SRC is not defined) +else +KERNELDIR:=$(KERNEL_SRC) +endif +PWD:=$(shell pwd) +default: + $(MAKE) -C $(KERNELDIR) M=$(PWD) modules +clean: + rm -rf *.o *.mod.o *.mod.o *.ko .*cmd .tmp_versions Module.markers Module.symvers modules.order +endif diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_cpld1.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_cpld1.c new file mode 100755 index 000000000000..d2db4fb1f484 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_cpld1.c @@ -0,0 +1,1021 @@ +/* + * A hwmon driver for the as7716_32xbb_cpld + * + * Copyright (C) 2013 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ +#define STRING_TO_DEC_VALUE 10 + +static ssize_t show_present(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t get_mode_reset(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); + +static int as7716_32xb_cpld_read_internal(struct i2c_client *client, u8 reg); +static int as7716_32xb_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value); + +static ssize_t sfp_value_show(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t sfp_value_store(struct device *dev, struct device_attribute *da, + char *buf, size_t size); + + +#define PORT_NUM_MAX 32 + +struct as7716_32xb_cpld_data { + struct device *hwmon_dev; + struct mutex update_lock; + unsigned int present[PORT_NUM_MAX]; + unsigned int reset[PORT_NUM_MAX]; +}; +enum port_id { + PORT1_ID, + PORT2_ID, + PORT3_ID, + PORT4_ID, + PORT5_ID, + PORT6_ID, + PORT7_ID, + PORT8_ID, + PORT9_ID, + PORT10_ID, + PORT11_ID, + PORT12_ID, + PORT13_ID, + PORT14_ID, + PORT15_ID, + PORT16_ID, + PORT17_ID, + PORT18_ID, + PORT19_ID, + PORT20_ID, + PORT21_ID, + PORT22_ID, + PORT23_ID, + PORT24_ID, + PORT25_ID, + PORT26_ID, + PORT27_ID, + PORT28_ID, + PORT29_ID, + PORT30_ID, + PORT31_ID, + PORT32_ID +}; + +/* Addresses scanned for as7716_32xbb_cpld + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +#define TRANSCEIVER_PRESENT_ATTR_ID(index) MODULE_PRESENT_##index +#define TRANSCEIVER_RESET_ATTR_ID(index) MODULE_RESET_##index + +enum as7716_32xb_cpld_sysfs_attributes { + CPLD_VERSION, + ACCESS, + MODULE_PRESENT_ALL, + /* transceiver attributes */ + TRANSCEIVER_PRESENT_ATTR_ID(1), + TRANSCEIVER_PRESENT_ATTR_ID(2), + TRANSCEIVER_PRESENT_ATTR_ID(3), + TRANSCEIVER_PRESENT_ATTR_ID(4), + TRANSCEIVER_PRESENT_ATTR_ID(5), + TRANSCEIVER_PRESENT_ATTR_ID(6), + TRANSCEIVER_PRESENT_ATTR_ID(7), + TRANSCEIVER_PRESENT_ATTR_ID(8), + TRANSCEIVER_PRESENT_ATTR_ID(9), + TRANSCEIVER_PRESENT_ATTR_ID(10), + TRANSCEIVER_PRESENT_ATTR_ID(11), + TRANSCEIVER_PRESENT_ATTR_ID(12), + TRANSCEIVER_PRESENT_ATTR_ID(13), + TRANSCEIVER_PRESENT_ATTR_ID(14), + TRANSCEIVER_PRESENT_ATTR_ID(15), + TRANSCEIVER_PRESENT_ATTR_ID(16), + TRANSCEIVER_PRESENT_ATTR_ID(17), + TRANSCEIVER_PRESENT_ATTR_ID(18), + TRANSCEIVER_PRESENT_ATTR_ID(19), + TRANSCEIVER_PRESENT_ATTR_ID(20), + TRANSCEIVER_PRESENT_ATTR_ID(21), + TRANSCEIVER_PRESENT_ATTR_ID(22), + TRANSCEIVER_PRESENT_ATTR_ID(23), + TRANSCEIVER_PRESENT_ATTR_ID(24), + TRANSCEIVER_PRESENT_ATTR_ID(25), + TRANSCEIVER_PRESENT_ATTR_ID(26), + TRANSCEIVER_PRESENT_ATTR_ID(27), + TRANSCEIVER_PRESENT_ATTR_ID(28), + TRANSCEIVER_PRESENT_ATTR_ID(29), + TRANSCEIVER_PRESENT_ATTR_ID(30), + TRANSCEIVER_PRESENT_ATTR_ID(31), + TRANSCEIVER_PRESENT_ATTR_ID(32), + TRANSCEIVER_RESET_ATTR_ID(1), + TRANSCEIVER_RESET_ATTR_ID(2), + TRANSCEIVER_RESET_ATTR_ID(3), + TRANSCEIVER_RESET_ATTR_ID(4), + TRANSCEIVER_RESET_ATTR_ID(5), + TRANSCEIVER_RESET_ATTR_ID(6), + TRANSCEIVER_RESET_ATTR_ID(7), + TRANSCEIVER_RESET_ATTR_ID(8), + TRANSCEIVER_RESET_ATTR_ID(9), + TRANSCEIVER_RESET_ATTR_ID(10), + TRANSCEIVER_RESET_ATTR_ID(11), + TRANSCEIVER_RESET_ATTR_ID(12), + TRANSCEIVER_RESET_ATTR_ID(13), + TRANSCEIVER_RESET_ATTR_ID(14), + TRANSCEIVER_RESET_ATTR_ID(15), + TRANSCEIVER_RESET_ATTR_ID(16), + TRANSCEIVER_RESET_ATTR_ID(17), + TRANSCEIVER_RESET_ATTR_ID(18), + TRANSCEIVER_RESET_ATTR_ID(19), + TRANSCEIVER_RESET_ATTR_ID(20), + TRANSCEIVER_RESET_ATTR_ID(21), + TRANSCEIVER_RESET_ATTR_ID(22), + TRANSCEIVER_RESET_ATTR_ID(23), + TRANSCEIVER_RESET_ATTR_ID(24), + TRANSCEIVER_RESET_ATTR_ID(25), + TRANSCEIVER_RESET_ATTR_ID(26), + TRANSCEIVER_RESET_ATTR_ID(27), + TRANSCEIVER_RESET_ATTR_ID(28), + TRANSCEIVER_RESET_ATTR_ID(29), + TRANSCEIVER_RESET_ATTR_ID(30), + TRANSCEIVER_RESET_ATTR_ID(31), + TRANSCEIVER_RESET_ATTR_ID(32), +}; + +/* sysfs attributes for hwmon + */ + +/* transceiver attributes */ +/*present*/ +#define DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_present_##index, S_IWUSR|S_IRUGO, sfp_value_show, sfp_value_store, MODULE_PRESENT_##index) +#define DECLARE_TRANSCEIVER_ATTR(index) &sensor_dev_attr_module_present_##index.dev_attr.attr + +/*reset*/ +//#define DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(index) \ +// static SENSOR_DEVICE_ATTR(module_reset_##index, S_IWUSR | S_IRUGO, get_mode_reset, set_mode_reset, MODULE_RESET_##index) +//#define DECLARE_TRANSCEIVER_RESET_ATTR(index) &sensor_dev_attr_module_reset_##index.dev_attr.attr +#define DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(index) \ + static SENSOR_DEVICE_ATTR(module_reset_##index, S_IWUSR | S_IRUGO, sfp_value_show, sfp_value_store, MODULE_RESET_##index) +#define DECLARE_TRANSCEIVER_RESET_ATTR(index) &sensor_dev_attr_module_reset_##index.dev_attr.attr + + + + +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(access, S_IWUSR, NULL, access, ACCESS); +/* transceiver attributes */ +static SENSOR_DEVICE_ATTR(module_present_all, S_IRUGO, show_present_all, NULL, MODULE_PRESENT_ALL); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(1); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(2); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(3); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(4); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(5); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(6); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(7); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(8); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(9); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(10); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(11); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(12); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(13); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(14); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(15); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(16); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(17); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(18); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(19); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(20); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(21); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(22); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(23); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(24); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(25); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(26); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(27); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(28); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(29); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(30); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(31); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_ATTR(32); + +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(1); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(2); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(3); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(4); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(5); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(6); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(7); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(8); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(9); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(10); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(11); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(12); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(13); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(14); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(15); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(16); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(17); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(18); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(19); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(20); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(21); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(22); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(23); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(24); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(25); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(26); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(27); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(28); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(29); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(30); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(31); +DECLARE_TRANSCEIVER_SENSOR_DEVICE_RESET_ATTR(32); + + +static struct attribute *as7716_32xb_cpld_attributes[] = { + &sensor_dev_attr_version.dev_attr.attr, + &sensor_dev_attr_access.dev_attr.attr, + /* transceiver attributes */ + &sensor_dev_attr_module_present_all.dev_attr.attr, + DECLARE_TRANSCEIVER_ATTR(1), + DECLARE_TRANSCEIVER_ATTR(2), + DECLARE_TRANSCEIVER_ATTR(3), + DECLARE_TRANSCEIVER_ATTR(4), + DECLARE_TRANSCEIVER_ATTR(5), + DECLARE_TRANSCEIVER_ATTR(6), + DECLARE_TRANSCEIVER_ATTR(7), + DECLARE_TRANSCEIVER_ATTR(8), + DECLARE_TRANSCEIVER_ATTR(9), + DECLARE_TRANSCEIVER_ATTR(10), + DECLARE_TRANSCEIVER_ATTR(11), + DECLARE_TRANSCEIVER_ATTR(12), + DECLARE_TRANSCEIVER_ATTR(13), + DECLARE_TRANSCEIVER_ATTR(14), + DECLARE_TRANSCEIVER_ATTR(15), + DECLARE_TRANSCEIVER_ATTR(16), + DECLARE_TRANSCEIVER_ATTR(17), + DECLARE_TRANSCEIVER_ATTR(18), + DECLARE_TRANSCEIVER_ATTR(19), + DECLARE_TRANSCEIVER_ATTR(20), + DECLARE_TRANSCEIVER_ATTR(21), + DECLARE_TRANSCEIVER_ATTR(22), + DECLARE_TRANSCEIVER_ATTR(23), + DECLARE_TRANSCEIVER_ATTR(24), + DECLARE_TRANSCEIVER_ATTR(25), + DECLARE_TRANSCEIVER_ATTR(26), + DECLARE_TRANSCEIVER_ATTR(27), + DECLARE_TRANSCEIVER_ATTR(28), + DECLARE_TRANSCEIVER_ATTR(29), + DECLARE_TRANSCEIVER_ATTR(30), + DECLARE_TRANSCEIVER_ATTR(31), + DECLARE_TRANSCEIVER_ATTR(32), + DECLARE_TRANSCEIVER_RESET_ATTR(1), + DECLARE_TRANSCEIVER_RESET_ATTR(2), + DECLARE_TRANSCEIVER_RESET_ATTR(3), + DECLARE_TRANSCEIVER_RESET_ATTR(4), + DECLARE_TRANSCEIVER_RESET_ATTR(5), + DECLARE_TRANSCEIVER_RESET_ATTR(6), + DECLARE_TRANSCEIVER_RESET_ATTR(7), + DECLARE_TRANSCEIVER_RESET_ATTR(8), + DECLARE_TRANSCEIVER_RESET_ATTR(9), + DECLARE_TRANSCEIVER_RESET_ATTR(10), + DECLARE_TRANSCEIVER_RESET_ATTR(11), + DECLARE_TRANSCEIVER_RESET_ATTR(12), + DECLARE_TRANSCEIVER_RESET_ATTR(13), + DECLARE_TRANSCEIVER_RESET_ATTR(14), + DECLARE_TRANSCEIVER_RESET_ATTR(15), + DECLARE_TRANSCEIVER_RESET_ATTR(16), + DECLARE_TRANSCEIVER_RESET_ATTR(17), + DECLARE_TRANSCEIVER_RESET_ATTR(18), + DECLARE_TRANSCEIVER_RESET_ATTR(19), + DECLARE_TRANSCEIVER_RESET_ATTR(20), + DECLARE_TRANSCEIVER_RESET_ATTR(21), + DECLARE_TRANSCEIVER_RESET_ATTR(22), + DECLARE_TRANSCEIVER_RESET_ATTR(23), + DECLARE_TRANSCEIVER_RESET_ATTR(24), + DECLARE_TRANSCEIVER_RESET_ATTR(25), + DECLARE_TRANSCEIVER_RESET_ATTR(26), + DECLARE_TRANSCEIVER_RESET_ATTR(27), + DECLARE_TRANSCEIVER_RESET_ATTR(28), + DECLARE_TRANSCEIVER_RESET_ATTR(29), + DECLARE_TRANSCEIVER_RESET_ATTR(30), + DECLARE_TRANSCEIVER_RESET_ATTR(31), + DECLARE_TRANSCEIVER_RESET_ATTR(32), + NULL +}; + +static const struct attribute_group as7716_32xb_cpld_group = { + .attrs = as7716_32xb_cpld_attributes, +}; + +static ssize_t show_present_all(struct device *dev, struct device_attribute *da, + char *buf) +{ + int i, status; + u8 values[4] = {0}; + u8 regs[] = {0x30, 0x31, 0x32, 0x33}; + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_cpld_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = as7716_32xb_cpld_read_internal(client, regs[i]); + + if (status < 0) { + goto exit; + } + + values[i] = ~(u8)status; + } + + mutex_unlock(&data->update_lock); + + /* Return values 1 -> 32 in order */ + return sprintf(buf, "%.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], + values[3]); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static int sfp_array_index_get(int attr_idx) +{ + switch(attr_idx) + { + case TRANSCEIVER_PRESENT_ATTR_ID(1): + case TRANSCEIVER_RESET_ATTR_ID(1): + return PORT1_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(2): + case TRANSCEIVER_RESET_ATTR_ID(2): + return PORT2_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(3): + case TRANSCEIVER_RESET_ATTR_ID(3): + return PORT3_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(4): + case TRANSCEIVER_RESET_ATTR_ID(4): + return PORT4_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(5): + case TRANSCEIVER_RESET_ATTR_ID(5): + return PORT5_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(6): + case TRANSCEIVER_RESET_ATTR_ID(6): + return PORT6_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(7): + case TRANSCEIVER_RESET_ATTR_ID(7): + return PORT7_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(8): + case TRANSCEIVER_RESET_ATTR_ID(8): + return PORT8_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(9): + case TRANSCEIVER_RESET_ATTR_ID(9): + return PORT9_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(10): + case TRANSCEIVER_RESET_ATTR_ID(10): + return PORT10_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(11): + case TRANSCEIVER_RESET_ATTR_ID(11): + return PORT11_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(12): + case TRANSCEIVER_RESET_ATTR_ID(12): + return PORT12_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(13): + case TRANSCEIVER_RESET_ATTR_ID(13): + return PORT13_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(14): + case TRANSCEIVER_RESET_ATTR_ID(14): + return PORT14_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(15): + case TRANSCEIVER_RESET_ATTR_ID(15): + return PORT15_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(16): + case TRANSCEIVER_RESET_ATTR_ID(16): + return PORT16_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(17): + case TRANSCEIVER_RESET_ATTR_ID(17): + return PORT17_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(18): + case TRANSCEIVER_RESET_ATTR_ID(18): + return PORT18_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(19): + case TRANSCEIVER_RESET_ATTR_ID(19): + return PORT19_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(20): + case TRANSCEIVER_RESET_ATTR_ID(20): + return PORT20_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(21): + case TRANSCEIVER_RESET_ATTR_ID(21): + return PORT21_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(22): + case TRANSCEIVER_RESET_ATTR_ID(22): + return PORT22_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(23): + case TRANSCEIVER_RESET_ATTR_ID(23): + return PORT23_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(24): + case TRANSCEIVER_RESET_ATTR_ID(24): + return PORT24_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(25): + case TRANSCEIVER_RESET_ATTR_ID(25): + return PORT25_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(26): + case TRANSCEIVER_RESET_ATTR_ID(26): + return PORT26_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(27): + case TRANSCEIVER_RESET_ATTR_ID(27): + return PORT27_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(28): + case TRANSCEIVER_RESET_ATTR_ID(28): + return PORT28_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(29): + case TRANSCEIVER_RESET_ATTR_ID(29): + return PORT29_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(30): + case TRANSCEIVER_RESET_ATTR_ID(30): + return PORT30_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(31): + case TRANSCEIVER_RESET_ATTR_ID(31): + return PORT31_ID; + case TRANSCEIVER_PRESENT_ATTR_ID(32): + case TRANSCEIVER_RESET_ATTR_ID(32): + return PORT32_ID; + default : + return -1; + } +} + + +static ssize_t sfp_value_store(struct device *dev, struct device_attribute *da, + char *buf, size_t size) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_cpld_data *data = i2c_get_clientdata(client); + int status = -EINVAL; + int index; + long keyin = 0; + + //printk("sfp_value_store\n"); + //printk("attr->index=%d\n", attr->index); + mutex_lock(&data->update_lock); + switch (attr->index) + { + case MODULE_PRESENT_1 ... MODULE_PRESENT_8: + case MODULE_PRESENT_9 ... MODULE_PRESENT_16: + case MODULE_PRESENT_17 ... MODULE_PRESENT_24: + case MODULE_PRESENT_25 ... MODULE_PRESENT_32: + index=sfp_array_index_get(attr->index); + if(index < 0 || index > PORT_NUM_MAX -1) + break; + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if(keyin < 0 || keyin > 1) + break; + data->present[index]=keyin; + break; + case MODULE_RESET_1 ... MODULE_RESET_8: + case MODULE_RESET_9 ... MODULE_RESET_16: + case MODULE_RESET_17 ... MODULE_RESET_24: + case MODULE_RESET_25 ... MODULE_RESET_32: + index=sfp_array_index_get(attr->index); + if(index < 0 || index > PORT_NUM_MAX -1) + break; + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if(keyin < 0 || keyin > 1) + break; + data->reset[index]=keyin; + break; + default : + break; + } + mutex_unlock(&data->update_lock); + return size; +} +static ssize_t sfp_value_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_cpld_data *data = i2c_get_clientdata(client); + ssize_t ret = 0; + int index; + int status = -EINVAL; + + //printk("sfp_value_show, attr->index=%d\n", attr->index); + //printk("TRANSCEIVER_PRESENT_ATTR_ID(1)=%d, TRANSCEIVER_RESET_ATTR_ID(1)=%d\n", TRANSCEIVER_PRESENT_ATTR_ID(1), TRANSCEIVER_RESET_ATTR_ID(1)); + mutex_lock(&data->update_lock); + switch (attr->index) + { + case MODULE_PRESENT_1 ... MODULE_PRESENT_8: + case MODULE_PRESENT_9 ... MODULE_PRESENT_16: + case MODULE_PRESENT_17 ... MODULE_PRESENT_24: + case MODULE_PRESENT_25 ... MODULE_PRESENT_32: + index=sfp_array_index_get(attr->index); + if(index < 0 || index > PORT_NUM_MAX -1) + break; + status = sprintf(buf, "%u\n", data->present[index]); + break; + case MODULE_RESET_1 ... MODULE_RESET_8: + case MODULE_RESET_9 ... MODULE_RESET_16: + case MODULE_RESET_17 ... MODULE_RESET_24: + case MODULE_RESET_25 ... MODULE_RESET_32: + index=sfp_array_index_get(attr->index); + //printk("rst:attr->index=%d, index=%d\n",attr->index, index); + if(index < 0 || index > PORT_NUM_MAX -1) + break; + status = sprintf(buf, "%u\n", data->reset[index]); + break; + default : + break; + } + + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_present(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0; + + switch (attr->index) { + case MODULE_PRESENT_1 ... MODULE_PRESENT_8: + reg = 0x30; + mask = 0x1 << (attr->index - MODULE_PRESENT_1); + break; + case MODULE_PRESENT_9 ... MODULE_PRESENT_16: + reg = 0x31; + mask = 0x1 << (attr->index - MODULE_PRESENT_9); + break; + case MODULE_PRESENT_17 ... MODULE_PRESENT_24: + reg = 0x32; + mask = 0x1 << (attr->index - MODULE_PRESENT_17); + break; + case MODULE_PRESENT_25 ... MODULE_PRESENT_32: + reg = 0x33; + mask = 0x1 << (attr->index - MODULE_PRESENT_25); + break; + default: + return 0; + } + + + mutex_lock(&data->update_lock); + status = as7716_32xb_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\n", !(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf) +{ + u8 reg = 0, mask = 0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + + switch (attr->index) { + case CPLD_VERSION: + reg = 0x1; + mask = 0xFF; + break; + default: + break; + } + + mutex_lock(&data->update_lock); + status = as7716_32xb_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return sprintf(buf, "%d\n", (status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int status; + u32 addr, val; + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_cpld_data *data = i2c_get_clientdata(client); + + if (sscanf(buf, "0x%x 0x%x", &addr, &val) != 2) { + return -EINVAL; + } + + if (addr > 0xFF || val > 0xFF) { + return -EINVAL; + } + + mutex_lock(&data->update_lock); + status = as7716_32xb_cpld_write_internal(client, addr, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static int as7716_32xb_cpld_read_internal(struct i2c_client *client, u8 reg) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, reg); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static int as7716_32xb_cpld_write_internal(struct i2c_client *client, u8 reg, u8 value) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, reg, value); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static void as7716_32xb_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void as7716_32xb_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static int as7716_32xb_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + struct as7716_32xb_cpld_data *data = NULL; + + data = kzalloc(sizeof(struct as7716_32xb_cpld_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32xb_cpld_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + as7716_32xb_cpld_add_client(client); + + dev_info(&client->dev, "%s: cpld '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_cpld_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32xb_cpld_remove(struct i2c_client *client) +{ + struct as7716_32xb_cpld_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_cpld_group); + kfree(data); + as7716_32xb_cpld_remove_client(client); + + return 0; +} + +int as7716_32xb_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_read_byte_data(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as7716_32xb_cpld_read); + +int as7716_32xb_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_write_byte_data(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(as7716_32xb_cpld_write); + +static ssize_t get_mode_reset(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_cpld_data *data = i2c_get_clientdata(client); + int status = 0; + u8 reg = 0, mask = 0; + + switch (attr->index) { + case MODULE_RESET_1 ... MODULE_RESET_8: + reg = 0x04; + mask = 0x1 << (attr->index - MODULE_RESET_1); + break; + case MODULE_RESET_9 ... MODULE_RESET_16: + reg = 0x05; + mask = 0x1 << (attr->index - MODULE_RESET_9); + break; + case MODULE_RESET_17 ... MODULE_RESET_24: + reg = 0x06; + mask = 0x1 << (attr->index - MODULE_RESET_17); + break; + case MODULE_RESET_25 ... MODULE_RESET_32: + reg = 0x07; + mask = 0x1 << (attr->index - MODULE_RESET_25); + break; + default: + return 0; + } + + + mutex_lock(&data->update_lock); + status = as7716_32xb_cpld_read_internal(client, reg); + + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + + return sprintf(buf, "%d\r\n", !(status & mask)); + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t set_mode_reset(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_cpld_data *data = i2c_get_clientdata(client); + long reset; + int status=0, val, error; + u8 reg = 0, mask = 0; + + + error = kstrtol(buf, 10, &reset); + if (error) { + return error; + } + //printk("set_mode_reset:attr->index=%d\n",attr->index); + switch (attr->index) { + case MODULE_RESET_1 ... MODULE_RESET_8: + reg = 0x04; + mask = 0x1 << (attr->index - MODULE_RESET_1); + break; + case MODULE_RESET_9 ... MODULE_RESET_16: + reg = 0x05; + mask = 0x1 << (attr->index - MODULE_RESET_9); + break; + case MODULE_RESET_17 ... MODULE_RESET_24: + reg = 0x06; + mask = 0x1 << (attr->index - MODULE_RESET_17); + break; + case MODULE_RESET_25 ... MODULE_RESET_32: + reg = 0x07; + mask = 0x1 << (attr->index - MODULE_RESET_25); + break; + default: + return 0; + } + mutex_lock(&data->update_lock); + + status = as7716_32xb_cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + //printk("set_mode_reset:reset=%d, reg=0x%x, mask=0x%x, ori_val=0x%x\n", reset, reg, mask, status); + /* Update lp_mode status */ + if (reset) + { + val = status&(~mask); + //printk("1:new val=0x%x\n", val); + } + else + { + val =status | (mask); + //printk("0:new val=0x%x\n", val); + } + + status = as7716_32xb_cpld_write_internal(client, reg, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + + + +static const struct i2c_device_id as7716_32xb_cpld_id[] = { + { "as7716_32xb_cpld1", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32xb_cpld_id); + +static struct i2c_driver as7716_32xb_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32xb_cpld1", + }, + .probe = as7716_32xb_cpld_probe, + .remove = as7716_32xb_cpld_remove, + .id_table = as7716_32xb_cpld_id, + .address_list = normal_i2c, +}; + +static int __init as7716_32xb_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&as7716_32xb_cpld_driver); +} + +static void __exit as7716_32xb_cpld_exit(void) +{ + i2c_del_driver(&as7716_32xb_cpld_driver); +} + +module_init(as7716_32xb_cpld_init); +module_exit(as7716_32xb_cpld_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7716_32xb_cpld driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_fan.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_fan.c new file mode 100755 index 000000000000..5c1c3016c3a1 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_fan.c @@ -0,0 +1,969 @@ +/* + * A hwmon driver for the Accton as7716 32x fan + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "as7716_32xb_fan" + +#define NUM_THERMAL_SENSORS (3) /* Get sum of this number of sensors.*/ +#define THERMAL_SENSORS_DRIVER "lm75" +#define STRING_TO_DEC_VALUE 10 + +#define IN +#define OUT + +static struct as7716_32xb_fan_data *as7716_32xb_fan_update_device(struct device *dev); +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_enable(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, char *buf); + + +static ssize_t fan_value_show(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t fan_value_store(struct device *dev, struct device_attribute *da, + char *buf, size_t size); + +/* fan related data, the index should match sysfs_fan_attributes + */ +static const u8 fan_reg[] = { + 0x0F, /* fan 1-6 present status */ + 0x10, /* fan 1-6 direction(0:B2F 1:F2B) */ + 0x11, /* fan PWM(for all fan) */ + 0x12, /* front fan 1 speed(rpm) */ + 0x13, /* front fan 2 speed(rpm) */ + 0x14, /* front fan 3 speed(rpm) */ + 0x15, /* front fan 4 speed(rpm) */ + 0x16, /* front fan 5 speed(rpm) */ + 0x17, /* front fan 6 speed(rpm) */ + 0x22, /* rear fan 1 speed(rpm) */ + 0x23, /* rear fan 2 speed(rpm) */ + 0x24, /* rear fan 3 speed(rpm) */ + 0x25, /* rear fan 4 speed(rpm) */ + 0x26, /* rear fan 5 speed(rpm) */ + 0x27, /* rear fan 6 speed(rpm) */ +}; + +#define FAN_NUM_MAX 6 +/* Each client has this additional data */ +struct as7716_32xb_fan_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[ARRAY_SIZE(fan_reg)]; /* Register value */ + u8 enable; + u8 duty_cycle; + int system_temp; /*In unit of mini-Celsius*/ + int sensors_found; + unsigned int present[FAN_NUM_MAX]; + unsigned int front_speed_rpm[FAN_NUM_MAX]; + unsigned int rear_speed_rpm[FAN_NUM_MAX]; + unsigned int direction[FAN_NUM_MAX]; + unsigned int fault[FAN_NUM_MAX]; + unsigned int input[FAN_NUM_MAX]; +}; + +enum FAN_ID { + FAN1_ID, + FAN2_ID, + FAN3_ID, + FAN4_ID, + FAN5_ID, + FAN6_ID +}; + +enum sysfs_fan_attributes { + FAN_PRESENT_REG, + FAN_DIRECTION_REG, + FAN_DUTY_CYCLE_PERCENTAGE, /* Only one CPLD register to control duty cycle for all fans */ + FAN1_FRONT_SPEED_RPM, + FAN2_FRONT_SPEED_RPM, + FAN3_FRONT_SPEED_RPM, + FAN4_FRONT_SPEED_RPM, + FAN5_FRONT_SPEED_RPM, + FAN6_FRONT_SPEED_RPM, + FAN1_REAR_SPEED_RPM, + FAN2_REAR_SPEED_RPM, + FAN3_REAR_SPEED_RPM, + FAN4_REAR_SPEED_RPM, + FAN5_REAR_SPEED_RPM, + FAN6_REAR_SPEED_RPM, + FAN1_DIRECTION, + FAN2_DIRECTION, + FAN3_DIRECTION, + FAN4_DIRECTION, + FAN5_DIRECTION, + FAN6_DIRECTION, + FAN1_PRESENT, + FAN2_PRESENT, + FAN3_PRESENT, + FAN4_PRESENT, + FAN5_PRESENT, + FAN6_PRESENT, + FAN1_FAULT, + FAN2_FAULT, + FAN3_FAULT, + FAN4_FAULT, + FAN5_FAULT, + FAN6_FAULT +}; + +/* Define attributes + */ +#define DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_fault, S_IRUGO|S_IWUSR, fan_value_show, fan_value_store, FAN##index##_FAULT);\ + static SENSOR_DEVICE_ATTR(fan##index2##_fault, S_IRUGO|S_IWUSR, fan_value_show, fan_value_store, FAN##index##_FAULT) +#define DECLARE_FAN_FAULT_ATTR(index, index2) &sensor_dev_attr_fan##index##_fault.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_fault.dev_attr.attr + +#define DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_direction, S_IRUGO|S_IWUSR, fan_value_show, fan_value_store, FAN##index##_DIRECTION) +#define DECLARE_FAN_DIRECTION_ATTR(index) &sensor_dev_attr_fan##index##_direction.dev_attr.attr + + +#define DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_value_show, fan_value_store, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index, S_IWUSR | S_IRUGO, fan_value_show, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index##_enable, S_IWUSR | S_IRUGO, get_enable, set_enable, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_DUTY_CYCLE_ATTR(index) &sensor_dev_attr_fan_duty_cycle_percentage.dev_attr.attr, \ + &sensor_dev_attr_pwm##index.dev_attr.attr, \ + &sensor_dev_attr_pwm##index##_enable.dev_attr.attr + +#define DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR() \ + static SENSOR_DEVICE_ATTR(sys_temp, S_IWUSR|S_IRUGO, get_sys_temp, NULL, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_SYSTEM_TEMP_ATTR() &sensor_dev_attr_sys_temp.dev_attr.attr + + + +#define DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_present, S_IWUSR|S_IRUGO, fan_value_show, fan_value_store, FAN##index##_PRESENT) +#define DECLARE_FAN_PRESENT_ATTR(index) &sensor_dev_attr_fan##index##_present.dev_attr.attr + + +#define DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_front_speed_rpm, S_IWUSR|S_IRUGO, fan_value_show, fan_value_store, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_rear_speed_rpm, S_IWUSR|S_IRUGO, fan_value_show, fan_value_store, FAN##index##_REAR_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_input, S_IWUSR|S_IRUGO, fan_value_show, fan_value_store, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index2##_input, S_IWUSR|S_IRUGO, fan_value_show, fan_value_store, FAN##index##_REAR_SPEED_RPM) +#define DECLARE_FAN_SPEED_RPM_ATTR(index, index2) &sensor_dev_attr_fan##index##_front_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_rear_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_input.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_input.dev_attr.attr + +/* 6 fan fault attributes in this platform */ +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(6,16); +/* 6 fan speed(rpm) attributes in this platform */ +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(4,14); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(5,15); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(6,16); +/* 6 fan present attributes in this platform */ +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(1); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(2); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(3); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(4); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(5); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(6); + +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(1); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(2); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(3); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(4); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(5); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(6); + +/* 1 fan duty cycle attribute in this platform */ +DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(1); +/* System temperature for fancontrol */ +DECLARE_FAN_SYSTEM_TEMP_SENSOR_DEV_ATTR(); + +static struct attribute *as7716_32xb_fan_attributes[] = { + /* fan related attributes */ + DECLARE_FAN_FAULT_ATTR(1,11), + DECLARE_FAN_FAULT_ATTR(2,12), + DECLARE_FAN_FAULT_ATTR(3,13), + DECLARE_FAN_FAULT_ATTR(4,14), + DECLARE_FAN_FAULT_ATTR(5,15), + DECLARE_FAN_FAULT_ATTR(6,16), + DECLARE_FAN_SPEED_RPM_ATTR(1,11), + DECLARE_FAN_SPEED_RPM_ATTR(2,12), + DECLARE_FAN_SPEED_RPM_ATTR(3,13), + DECLARE_FAN_SPEED_RPM_ATTR(4,14), + DECLARE_FAN_SPEED_RPM_ATTR(5,15), + DECLARE_FAN_SPEED_RPM_ATTR(6,16), + DECLARE_FAN_PRESENT_ATTR(1), + DECLARE_FAN_PRESENT_ATTR(2), + DECLARE_FAN_PRESENT_ATTR(3), + DECLARE_FAN_PRESENT_ATTR(4), + DECLARE_FAN_PRESENT_ATTR(5), + DECLARE_FAN_PRESENT_ATTR(6), + DECLARE_FAN_DIRECTION_ATTR(1), + DECLARE_FAN_DIRECTION_ATTR(2), + DECLARE_FAN_DIRECTION_ATTR(3), + DECLARE_FAN_DIRECTION_ATTR(4), + DECLARE_FAN_DIRECTION_ATTR(5), + DECLARE_FAN_DIRECTION_ATTR(6), + DECLARE_FAN_DUTY_CYCLE_ATTR(1), + DECLARE_FAN_SYSTEM_TEMP_ATTR(), + NULL +}; + +#define FAN_DUTY_CYCLE_REG_MASK 0xF +#define FAN_MAX_DUTY_CYCLE 100 +#define FAN_REG_VAL_TO_SPEED_RPM_STEP 100 + +static int as7716_32xb_fan_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int as7716_32xb_fan_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* fan utility functions + */ +static u32 reg_val_to_duty_cycle(u8 reg_val) +{ + reg_val &= FAN_DUTY_CYCLE_REG_MASK; + return ((u32)(reg_val+1) * 625 + 75)/ 100; +} + +static u8 duty_cycle_to_reg_val(u8 duty_cycle) +{ + return ((u32)duty_cycle * 100 / 625) - 1; +} + +static u32 reg_val_to_speed_rpm(u8 reg_val) +{ + return (u32)reg_val * FAN_REG_VAL_TO_SPEED_RPM_STEP; +} + +static u8 reg_val_to_direction(u8 reg_val, enum FAN_ID id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 1 : 0; +} +static u8 reg_val_to_is_present(u8 reg_val, enum FAN_ID id) +{ + u8 mask = (1 << id); + + reg_val &= mask; + + return reg_val ? 0 : 1; +} + +static u8 is_fan_fault(struct as7716_32xb_fan_data *data, enum FAN_ID id) +{ + u8 ret = 0; + + /* Check if the speed of front or rear fan is ZERO, + */ + if (!data->front_speed_rpm[id] && + !data->rear_speed_rpm[id] ) + { + ret = 1; + } + + return ret; +} + + +static ssize_t set_enable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct as7716_32xb_fan_data *data = as7716_32xb_fan_update_device(dev); + int error, value; + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > 1) + return -EINVAL; + + data->enable = value; + if (value == 0) + { + return set_duty_cycle(dev, da, buf, FAN_MAX_DUTY_CYCLE); + } + return count; +} + + + +static ssize_t get_enable(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7716_32xb_fan_data *data = as7716_32xb_fan_update_device(dev); + + return sprintf(buf, "%u\n", data->enable); +} + +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int error, value; + struct i2c_client *client = to_i2c_client(dev); + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > FAN_MAX_DUTY_CYCLE) + return -EINVAL; + + as7716_32xb_fan_write_value(client, 0x33, 0); /* Disable fan speed watch dog */ + as7716_32xb_fan_write_value(client, fan_reg[FAN_DUTY_CYCLE_PERCENTAGE], duty_cycle_to_reg_val(value)); + return count; +} + +/* Due to this struct is declared at lm75.c, it cannot be include + * under Sonic environment. I duplicate it from lm75.c. + */ +struct lm75_data { + struct i2c_client *client; + struct device *hwmon_dev; + struct thermal_zone_device *tz; + struct mutex update_lock; + u8 orig_conf; + u8 resolution; /* In bits, between 9 and 12 */ + u8 resolution_limits; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + unsigned long sample_time; /* In jiffies */ + s16 temp[3]; /* Register values, + 0 = input + 1 = max + 2 = hyst */ +}; + +/*Copied from lm75.c*/ +static inline long lm75_reg_to_mc(s16 temp, u8 resolution) +{ + return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8); +} + +/*Get hwmon_dev from i2c_client, set hwmon_dev = NULL is failed.*/ +static struct device * get_hwmon_dev( + struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if(data) + { + if( data->valid == 1 && data->hwmon_dev) + { + return data->hwmon_dev; + } + + } + return NULL; +} + +/* To find hwmon index by opening hwmon under that i2c address. + */ +static int find_hwmon_index_by_FileOpen( + int bus_nr, + unsigned short addr, + OUT int *index) +{ +#define MAX_HWMON_DEVICE (10) /* Find hwmon device in 0~10*/ + struct file *sfd; + char client_name[96]; + int i=0; + + do { + snprintf(client_name, sizeof(client_name), + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + + sfd = filp_open(client_name, O_RDONLY, 0); + i++; + } while( IS_ERR(sfd) && i < MAX_HWMON_DEVICE); + + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", client_name, __LINE__); + return -ENOENT; + } + filp_close(sfd, 0); + *index = i - 1; + return 0; + +#undef MAX_HWMON_DEVICE +} + +static int get_temp_file_path( + int bus_nr, unsigned short addr, + struct device *hwmon_dev + ,char *path, int max_len) +{ + + if(hwmon_dev && strlen(dev_name(hwmon_dev))) + { + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/%s/temp1_input", + bus_nr, addr, dev_name(hwmon_dev)); + } + else + { + int i=0; + if(find_hwmon_index_by_FileOpen( bus_nr, addr, &i)) + { + return -EIO; + } + snprintf(path, max_len, + "/sys/bus/i2c/devices/%d-%04x/hwmon/hwmon%d/temp1_input", + bus_nr, addr, i); + } + return 0; +} + +/*File read the dev file at user space.*/ +static int read_devfile_temp1_input( + struct device *dev, + int bus_nr, + unsigned short addr, + struct device *hwmon_dev, + int *miniCelsius) +{ + struct file *sfd; + char buffer[96]; + char devfile[96]; + int rc, status; + int rdlen, value; + mm_segment_t old_fs; + + rc = 0; + get_temp_file_path(bus_nr, addr, hwmon_dev, devfile, sizeof(devfile)); + sfd = filp_open(devfile, O_RDONLY, 0); + if (IS_ERR(sfd)) { + pr_err("Failed to open file(%s)#%d\r\n", devfile, __LINE__); + return -ENOENT; + } + dev_dbg(dev, "Found device:%s\n",devfile); + + if(!(sfd->f_op) || !(sfd->f_op->read) ) { + pr_err("file %s cann't readable ?\n",devfile); + return -ENOENT; + } + + old_fs = get_fs(); + set_fs(KERNEL_DS); + rdlen = sfd->f_op->read(sfd, buffer, sizeof(buffer), &sfd->f_pos); + if (rdlen == 0) { + pr_err( "File(%s) empty!\n", devfile); + rc = -EIO; + goto exit; + } + status = sscanf(buffer, "%d", &value); + if (status != 1) { + rc = -EIO; + goto exit; + } + *miniCelsius = value; + dev_dbg(dev,"found sensors: %d @i2c %d-%04x\n", value, bus_nr, addr); + +exit: + set_fs(old_fs); + filp_close(sfd, 0); + return rc; +} + +static u8 is_lm75_data_due(struct i2c_client *client) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + if (time_after(jiffies, data->last_updated + data->sample_time)) + { + return 1; + } + return 0; +} +static int get_lm75_temp(struct i2c_client *client, int *miniCelsius) +{ + struct lm75_data *data = NULL; + + data = i2c_get_clientdata(client); + *miniCelsius = lm75_reg_to_mc(data->temp[0], data->resolution); + + return 0; +} + +static int _find_lm75_device(struct device *dev, void *data) +{ + struct device_driver *driver; + struct as7716_32xb_fan_data *prv = data; + char *driver_name = THERMAL_SENSORS_DRIVER; + + driver = dev->driver; + if (driver && driver->name && + strcmp(driver->name, driver_name) == 0) + { + struct i2c_client *client; + client = to_i2c_client(dev); + if (client) + { + /*cannot use "struct i2c_adapter *adap = to_i2c_adapter(dev);"*/ + struct i2c_adapter *adap = client->adapter; + int miniCelsius = 0; + + + if (!adap) { + return -ENXIO; + } + + /* If the data is not updated, read them from devfile + to drive them updateing data from chip.*/ + if (is_lm75_data_due(client)) + { + struct device *hwmon_dev; + + hwmon_dev = get_hwmon_dev(client); + if(0 == read_devfile_temp1_input(dev, adap->nr, + client->addr, hwmon_dev, &miniCelsius)) + { + prv->system_temp += miniCelsius; + prv->sensors_found++; + } + + } + else + { + get_lm75_temp(client, &miniCelsius); + prv->system_temp += miniCelsius; + prv->sensors_found++; + + } + } + } + return 0; +} + +/*Find all lm75 devices and return sum of temperatures.*/ +static ssize_t get_sys_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + ssize_t ret = 0; + struct as7716_32xb_fan_data *data = as7716_32xb_fan_update_device(dev); + + data->system_temp=0; + data->sensors_found=0; + i2c_for_each_dev(data, _find_lm75_device); + if (NUM_THERMAL_SENSORS != data->sensors_found) + { + dev_dbg(dev,"only %d of %d temps are found\n", + data->sensors_found, NUM_THERMAL_SENSORS); + data->system_temp = 0; + } + ret = sprintf(buf, "%d\n",data->system_temp); + return ret; +} + + +static int fan_array_index_get(int attr_idx) +{ + switch(attr_idx) + { + case FAN1_PRESENT: + case FAN1_FRONT_SPEED_RPM: + case FAN1_REAR_SPEED_RPM: + case FAN1_FAULT: + case FAN1_DIRECTION: + return FAN1_ID; + case FAN2_PRESENT: + case FAN2_FRONT_SPEED_RPM: + case FAN2_REAR_SPEED_RPM: + case FAN2_FAULT: + case FAN2_DIRECTION: + return FAN2_ID; + case FAN3_PRESENT: + case FAN3_FRONT_SPEED_RPM: + case FAN3_REAR_SPEED_RPM: + case FAN3_FAULT: + case FAN3_DIRECTION: + return FAN3_ID; + case FAN4_PRESENT: + case FAN4_FRONT_SPEED_RPM: + case FAN4_REAR_SPEED_RPM: + case FAN4_FAULT: + case FAN4_DIRECTION: + return FAN4_ID; + case FAN5_PRESENT: + case FAN5_FRONT_SPEED_RPM: + case FAN5_REAR_SPEED_RPM: + case FAN5_FAULT: + case FAN5_DIRECTION: + return FAN5_ID; + case FAN6_PRESENT: + case FAN6_FRONT_SPEED_RPM: + case FAN6_REAR_SPEED_RPM: + case FAN6_FAULT: + case FAN6_DIRECTION: + return FAN6_ID; + default : + return -1; + } +} + +static ssize_t fan_value_store(struct device *dev, struct device_attribute *da, + char *buf, size_t size) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_fan_data *data = i2c_get_clientdata(client); + int status = -EINVAL; + int index; + long keyin = 0; + //printk("fan_value_store\n"); + //printk("attr->index=%d\n", attr->index); + mutex_lock(&data->update_lock); + switch (attr->index) + { + case FAN_DUTY_CYCLE_PERCENTAGE: + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if (status) + break; + if (keyin > 1 || keyin < 0) + break; + data->duty_cycle=keyin; + break; + case FAN1_FRONT_SPEED_RPM: + case FAN2_FRONT_SPEED_RPM: + case FAN3_FRONT_SPEED_RPM: + case FAN4_FRONT_SPEED_RPM: + case FAN5_FRONT_SPEED_RPM: + case FAN6_FRONT_SPEED_RPM: + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if (status) + break; + index=fan_array_index_get(attr->index); + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + data->front_speed_rpm[index]=keyin; + break; + case FAN1_REAR_SPEED_RPM: + case FAN2_REAR_SPEED_RPM: + case FAN3_REAR_SPEED_RPM: + case FAN4_REAR_SPEED_RPM: + case FAN5_REAR_SPEED_RPM: + case FAN6_REAR_SPEED_RPM: + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if (status) + break; + index=fan_array_index_get(attr->index); + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + data->rear_speed_rpm[index]=keyin; + case FAN1_PRESENT: + case FAN2_PRESENT: + case FAN3_PRESENT: + case FAN4_PRESENT: + case FAN5_PRESENT: + case FAN6_PRESENT: + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if (status) + break; + index=fan_array_index_get(attr->index); + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + if(keyin < 0 || keyin > 1) + break; + data->present[index]=keyin; + break; + case FAN1_FAULT: + case FAN2_FAULT: + case FAN3_FAULT: + case FAN4_FAULT: + case FAN5_FAULT: + case FAN6_FAULT: + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if (status) + break; + index=fan_array_index_get(attr->index); + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + if(keyin < 0 || keyin > 1) + break; + data->fault[index]=keyin; + break; + case FAN1_DIRECTION: + case FAN2_DIRECTION: + case FAN3_DIRECTION: + case FAN4_DIRECTION: + case FAN5_DIRECTION: + case FAN6_DIRECTION: + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if (status) + break; + index=fan_array_index_get(attr->index); + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + if(keyin < 0 || keyin > 1) + break; + data->direction[index]=keyin; + break; + default: + break; + } + mutex_unlock(&data->update_lock); + return size; +} +static ssize_t fan_value_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_fan_data *data = i2c_get_clientdata(client); + int status = -EINVAL; + int index=0; + //printk("ffan_value_show\n"); + //printk("attr->index=%d\n", attr->index); + mutex_lock(&data->update_lock); + switch (attr->index) + { + case FAN_DUTY_CYCLE_PERCENTAGE: + status = sprintf(buf, "%u\n", data->duty_cycle); + break; + case FAN1_FRONT_SPEED_RPM: + case FAN2_FRONT_SPEED_RPM: + case FAN3_FRONT_SPEED_RPM: + case FAN4_FRONT_SPEED_RPM: + case FAN5_FRONT_SPEED_RPM: + case FAN6_FRONT_SPEED_RPM: + index=fan_array_index_get(attr->index); + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + status = sprintf(buf, "%u\n", data->front_speed_rpm[index]); + break; + case FAN1_REAR_SPEED_RPM: + case FAN2_REAR_SPEED_RPM: + case FAN3_REAR_SPEED_RPM: + case FAN4_REAR_SPEED_RPM: + case FAN5_REAR_SPEED_RPM: + case FAN6_REAR_SPEED_RPM: + index=fan_array_index_get(attr->index); + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + status = sprintf(buf, "%u\n", data->rear_speed_rpm[index]); + break; + case FAN1_PRESENT: + case FAN2_PRESENT: + case FAN3_PRESENT: + case FAN4_PRESENT: + case FAN5_PRESENT: + case FAN6_PRESENT: + index=fan_array_index_get(attr->index); + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + status = sprintf(buf, "%d\n", data->present[index]); + break; + case FAN1_FAULT: + case FAN2_FAULT: + case FAN3_FAULT: + case FAN4_FAULT: + case FAN5_FAULT: + case FAN6_FAULT: + index=fan_array_index_get(attr->index); + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + status = sprintf(buf, "%d\n", is_fan_fault(data, index)); + break; + case FAN1_DIRECTION: + case FAN2_DIRECTION: + case FAN3_DIRECTION: + case FAN4_DIRECTION: + case FAN5_DIRECTION: + case FAN6_DIRECTION: + index=fan_array_index_get(attr->index);; + if(index < 0 || index > (FAN_NUM_MAX-1)) + break; + status = sprintf(buf, "%d\n", data->direction[index]); + break; + default: + break; + } + mutex_unlock(&data->update_lock); + return status; +} + +static const struct attribute_group as7716_32xb_fan_group = { + .attrs = as7716_32xb_fan_attributes, +}; + +static struct as7716_32xb_fan_data *as7716_32xb_fan_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_fan_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || + !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting as7716_32xb_fan update\n"); + data->valid = 0; + + /* Update fan data + */ + for (i = 0; i < ARRAY_SIZE(data->reg_val); i++) { + int status = as7716_32xb_fan_read_value(client, fan_reg[i]); + + if (status < 0) { + data->valid = 0; + mutex_unlock(&data->update_lock); + dev_dbg(&client->dev, "reg %d, err %d\n", fan_reg[i], status); + return data; + } + else { + data->reg_val[i] = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int as7716_32xb_fan_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32xb_fan_data *data; + int status; + + data = kzalloc(sizeof(struct as7716_32xb_fan_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32xb_fan_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: fan '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_fan_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32xb_fan_remove(struct i2c_client *client) +{ + struct as7716_32xb_fan_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_fan_group); + + return 0; +} + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x66, I2C_CLIENT_END }; + +static const struct i2c_device_id as7716_32xb_fan_id[] = { + { "as7716_32xb_fan", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32xb_fan_id); + +static struct i2c_driver as7716_32xb_fan_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = DRVNAME, + }, + .probe = as7716_32xb_fan_probe, + .remove = as7716_32xb_fan_remove, + .id_table = as7716_32xb_fan_id, + .address_list = normal_i2c, +}; + +static int __init as7716_32xb_fan_init(void) +{ + return i2c_add_driver(&as7716_32xb_fan_driver); +} + +static void __exit as7716_32xb_fan_exit(void) +{ + i2c_del_driver(&as7716_32xb_fan_driver); +} + +module_init(as7716_32xb_fan_init); +module_exit(as7716_32xb_fan_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7716_32xb_fan driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_leds.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_leds.c new file mode 100755 index 000000000000..2fa3fd722cb1 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_leds.c @@ -0,0 +1,443 @@ +/* + * A LED driver for the as7716_32xb_led + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +extern void led_classdev_unregister(struct led_classdev *led_cdev); +extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); +extern void led_classdev_resume(struct led_classdev *led_cdev); +extern void led_classdev_suspend(struct led_classdev *led_cdev); + +#define DRVNAME "as7716_32x_led" + +struct as7716_32x_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[1]; /* only 1 register*/ +}; + +static struct as7716_32x_led_data *ledctl = NULL; + +/* LED related data + */ + +#define LED_CNTRLER_I2C_ADDRESS (0x60) + +#define LED_TYPE_DIAG_REG_MASK (0x3) +#define LED_MODE_DIAG_GREEN_VALUE (0x02) +#define LED_MODE_DIAG_RED_VALUE (0x01) +#define LED_MODE_DIAG_AMBER_VALUE (0x00) /*It's yellow actually. Green+Red=Yellow*/ +#define LED_MODE_DIAG_OFF_VALUE (0x03) + + +#define LED_TYPE_LOC_REG_MASK (0x80) +#define LED_MODE_LOC_ON_VALUE (0) +#define LED_MODE_LOC_OFF_VALUE (0x80) + +enum led_type { + LED_TYPE_DIAG, + LED_TYPE_LOC, + LED_TYPE_FAN, + LED_TYPE_PSU1, + LED_TYPE_PSU2 +}; + +struct led_reg { + u32 types; + u8 reg_addr; +}; + +static const struct led_reg led_reg_map[] = { + {(1<update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting as7716_32x_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = as7716_32x_led_read_value(led_reg_map[i].reg_addr); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg_map[i].reg_addr, status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void as7716_32x_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + enum led_type type) +{ + int reg_val; + u8 reg ; + mutex_lock(&ledctl->update_lock); + + if( !getLedReg(type, ®)) + { + dev_dbg(&ledctl->pdev->dev, "Not match item for %d.\n", type); + } + + reg_val = as7716_32x_led_read_value(reg); + + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + as7716_32x_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + + +static void as7716_32x_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + as7716_32x_led_set(led_cdev, led_light_mode, LED_TYPE_DIAG); +} + +static enum led_brightness as7716_32x_led_diag_get(struct led_classdev *cdev) +{ + as7716_32x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void as7716_32x_led_loc_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + as7716_32x_led_set(led_cdev, led_light_mode, LED_TYPE_LOC); +} + +static enum led_brightness as7716_32x_led_loc_get(struct led_classdev *cdev) +{ + as7716_32x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_LOC, ledctl->reg_val[0]); +} + +static void as7716_32x_led_auto_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ +} + +static enum led_brightness as7716_32x_led_auto_get(struct led_classdev *cdev) +{ + return LED_MODE_AUTO; +} + +static struct led_classdev as7716_32x_leds[] = { + [LED_TYPE_DIAG] = { + .name = "as7716_32x_led::diag", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_diag_set, + .brightness_get = as7716_32x_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_RED, + }, + [LED_TYPE_LOC] = { + .name = "as7716_32x_led::loc", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_loc_set, + .brightness_get = as7716_32x_led_loc_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_BLUE, + }, + [LED_TYPE_FAN] = { + .name = "as7716_32x_led::fan", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_auto_set, + .brightness_get = as7716_32x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU1] = { + .name = "as7716_32x_led::psu1", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_auto_set, + .brightness_get = as7716_32x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU2] = { + .name = "as7716_32x_led::psu2", + .default_trigger = "unused", + .brightness_set = as7716_32x_led_auto_set, + .brightness_get = as7716_32x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, +}; + +static int as7716_32x_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(as7716_32x_leds); i++) { + led_classdev_suspend(&as7716_32x_leds[i]); + } + + return 0; +} + +static int as7716_32x_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(as7716_32x_leds); i++) { + led_classdev_resume(&as7716_32x_leds[i]); + } + + return 0; +} + +static int as7716_32x_led_probe(struct platform_device *pdev) +{ + int ret, i; + + printk("as7716_32x_led_probe 1\n"); + for (i = 0; i < ARRAY_SIZE(as7716_32x_leds); i++) { + ret = led_classdev_register(&pdev->dev, &as7716_32x_leds[i]); + + if (ret < 0) + { + printk("ret < 0, i=%d\n", i); + break; + } + } + printk("as7716_32x_led_probe 2\n"); + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(as7716_32x_leds)){ + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&as7716_32x_leds[i]); + } + } + + printk("as7716_32x_led_probe 3\n"); + return 0; +} + +static int as7716_32x_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(as7716_32x_leds); i++) { + led_classdev_unregister(&as7716_32x_leds[i]); + } + + return 0; +} + +static struct platform_driver as7716_32x_led_driver = { + .probe = as7716_32x_led_probe, + .remove = as7716_32x_led_remove, + .suspend = as7716_32x_led_suspend, + .resume = as7716_32x_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init as7716_32x_led_init(void) +{ + int ret; + + printk("leds:1\n"); + ret = platform_driver_register(&as7716_32x_led_driver); + if (ret < 0) { + printk("leds:fail platform_driver_register\n"); + goto exit; + } + printk("leds:2\n"); + ledctl = kzalloc(sizeof(struct as7716_32x_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&as7716_32x_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + printk("leds:3\n"); + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + printk("leds:fail platform_device_register_simple\n"); + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&as7716_32x_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return 0; +} + +static void __exit as7716_32x_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&as7716_32x_led_driver); + kfree(ledctl); +} + +module_init(as7716_32x_led_init); +module_exit(as7716_32x_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7716_32x_led driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_oom.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_oom.c new file mode 100755 index 000000000000..5e88d9efad5d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_oom.c @@ -0,0 +1,267 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STRING_TO_DEC_VALUE 10 +#define EEPROM_DATA_SIZE 512 + + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; +#define MAX_PORT_NAME_LEN 20 +/* Each client has this additional data + */ +struct as7716_32xb_oom_data { + struct device *hwmon_dev; + struct mutex lock; + u8 index; + unsigned char eeprom[EEPROM_DATA_SIZE]; + char port_name[MAX_PORT_NAME_LEN]; + +}; + + + +enum as7716_32xb_oom_sysfs_attributes { + TEMP1_INPUT, + TEMP1_MAX_HYST, + TEMP1_MAX +}; + +/* sysfs attributes for hwmon + */ + +static ssize_t oom_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t oom_info_show(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_port_name(struct device *dev, + struct device_attribute *dattr, char *buf); +static ssize_t set_port_name(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); +static SENSOR_DEVICE_ATTR(eeprom, S_IWUSR|S_IRUGO, oom_info_show, oom_info_store, 0); +static SENSOR_DEVICE_ATTR(port_name, S_IRUGO | S_IWUSR, show_port_name, set_port_name, 1); + + +static struct attribute *as7716_32xb_oom_attributes[] = { + &sensor_dev_attr_eeprom.dev_attr.attr, + &sensor_dev_attr_port_name.dev_attr.attr, + NULL +}; + + +static ssize_t oom_info_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_oom_data *data = i2c_get_clientdata(client); + int i; + + mutex_lock(&data->lock); + memcpy(buf, data->eeprom, EEPROM_DATA_SIZE); + //for(i=0; i < EEPROM_DATA_SIZE ; i++) + //{ + // buf[i]=data->eeprom[i]; + // printk("buf[%d]=0x%x ",i, buf[i]); + //} + //status = EEPROM_DATA_SIZE+1; + + + memcpy(buf, data->eeprom, 256); + mutex_unlock(&data->lock); + + return 256; +} + +static ssize_t oom_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t size) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_oom_data *data = i2c_get_clientdata(client); + int i=0, j=0, k=0; + unsigned char str[3]; + unsigned int val; + + // printk("strlen(buf)=%d\n",strlen(buf)); + k=0; + mutex_lock(&data->lock); + memset(data->eeprom, 0xFF, EEPROM_DATA_SIZE); + memset(str, 0x0, 3); + if(strlen(buf) >= 256 ) + { + for(i=0; i < strlen(buf) ; i++) + { + // printk("i=%d ", i); + for(j=0;j<2; j++) + { + str[j]=buf[i+j]; + } + sscanf(str, "%x", &val); + //printk("str=%s val=0x%x ", str, val); + i=j+i-1; + if(k>=EEPROM_DATA_SIZE) + { + break; + } + data->eeprom[k]=(unsigned char)val; + //printk("data->eeprom[%d]=0x%x\n",k, data->eeprom[k]); + k++; + } + } + //printk("buf=\n"); + //for(i=0; i < strlen(buf) ; i++) + //{ + // printk("%c%c ", buf[i], buf[i+1]); + // if((i % 31)==0) + // printk("\n"); + //} + //printk("\n"); + + + mutex_unlock(&data->lock); + return size; + +} + +static ssize_t show_port_name(struct device *dev, + struct device_attribute *dattr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_oom_data *data = i2c_get_clientdata(client); + ssize_t count; + + mutex_lock(&data->lock); + count = sprintf(buf, "%s\n", data->port_name); + mutex_unlock(&data->lock); + + return count; +} + +static ssize_t set_port_name(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_oom_data *data = i2c_get_clientdata(client); + char port_name[MAX_PORT_NAME_LEN]; + + /* no checking, this value is not used except by show_port_name */ + + if (sscanf(buf, "%19s", port_name) != 1) + return -EINVAL; + + mutex_lock(&data->lock); + strcpy(data->port_name, port_name); + mutex_unlock(&data->lock); + + return count; +} + + +static const struct attribute_group as7716_32xb_oom_group = { + .attrs = as7716_32xb_oom_attributes, +}; + +static int as7716_32xb_oom_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32xb_oom_data *data; + int status; + + data = kzalloc(sizeof(struct as7716_32xb_oom_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + i2c_set_clientdata(client, data); + data->index = dev_id->driver_data; + mutex_init(&data->lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32xb_oom_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: oom '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_oom_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32xb_oom_remove(struct i2c_client *client) +{ + struct as7716_32xb_oom_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_oom_group); + kfree(data); + + return 0; +} + + +static const struct i2c_device_id as7716_32xb_oom_id[] = { + { "as7716_32xb_oom", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32xb_oom_id); + +static struct i2c_driver as7716_32xb_oom_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32xb_oom", + }, + .probe = as7716_32xb_oom_probe, + .remove = as7716_32xb_oom_remove, + .id_table = as7716_32xb_oom_id, + .address_list = normal_i2c, +}; + + + + + + +static int __init as7716_32xb_oom_init(void) +{ + return i2c_add_driver(&as7716_32xb_oom_driver); +} + +static void __exit as7716_32xb_oom_exit(void) +{ + i2c_del_driver(&as7716_32xb_oom_driver); +} + +module_init(as7716_32xb_oom_init); +module_exit(as7716_32xb_oom_exit); + +MODULE_AUTHOR("Jostar yang "); +MODULE_DESCRIPTION("as7716_32xb_oom driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_pmbus.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_pmbus.c new file mode 100755 index 000000000000..3f4dba90d1aa --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_pmbus.c @@ -0,0 +1,444 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STRING_TO_DEC_VALUE 10 + + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7716_32xb_pmbus_data { + struct device *hwmon_dev; + struct mutex update_lock; + u8 index; + u8 capability; + u16 status_word; + u8 fan_fault; + u8 over_temp; + u16 v_out; + u16 i_out; + u16 p_out; + u16 temp; + u16 fan_speed; + u16 fan_duty_cycle; + u8 fan_dir[4]; + u8 pmbus_revision; + u8 mfr_id[10]; + u8 mfr_model[10]; + u8 mfr_revision[3]; + u16 mfr_vin_min; + u16 mfr_vin_max; + u16 mfr_iin_max; + u16 mfr_iout_max; + u16 mfr_pin_max; + u16 mfr_pout_max; + u16 mfr_vout_min; + u16 mfr_vout_max; + u16 power_on; + u16 temp_fault; + u16 power_good; +}; + + + +enum as7716_32xb_pmbus_sysfs_attributes { + PSU_POWER_ON = 0, + PSU_TEMP_FAULT, + PSU_POWER_GOOD, + PSU_FAN1_FAULT, + PSU_FAN_DIRECTION, + PSU_OVER_TEMP, + PSU_V_OUT, + PSU_I_OUT, + PSU_P_OUT, + PSU_P_OUT_UV, /*In Unit of microVolt, instead of mini.*/ + PSU_TEMP1_INPUT, + PSU_FAN1_SPEED, + PSU_FAN1_DUTY_CYCLE, + PSU_PMBUS_REVISION, + PSU_MFR_ID, + PSU_MFR_MODEL, + PSU_MFR_REVISION, + PSU_MFR_VIN_MIN, + PSU_MFR_VIN_MAX, + PSU_MFR_VOUT_MIN, + PSU_MFR_VOUT_MAX, + PSU_MFR_IIN_MAX, + PSU_MFR_IOUT_MAX, + PSU_MFR_PIN_MAX, + PSU_MFR_POUT_MAX +}; + +/* sysfs attributes for hwmon + */ +static ssize_t pmbus_info_show(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t pmbus_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static SENSOR_DEVICE_ATTR(psu_power_on, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_POWER_ON); +static SENSOR_DEVICE_ATTR(psu_temp_fault, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_TEMP_FAULT); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_POWER_GOOD); +static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_FAN1_FAULT); +static SENSOR_DEVICE_ATTR(psu_over_temp, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_OVER_TEMP); +static SENSOR_DEVICE_ATTR(psu_v_out, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(psu_i_out, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(psu_p_out, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_P_OUT); +static SENSOR_DEVICE_ATTR(psu_temp1_input,S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm,S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_FAN1_SPEED); +static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_FAN1_DUTY_CYCLE); +static SENSOR_DEVICE_ATTR(psu_fan_dir, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_FAN_DIRECTION); +static SENSOR_DEVICE_ATTR(psu_pmbus_revision,S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_PMBUS_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_id, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_ID); +static SENSOR_DEVICE_ATTR(psu_mfr_model, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_MODEL); +static SENSOR_DEVICE_ATTR(psu_mfr_revision, S_IWUSR| S_IRUGO, pmbus_info_show,pmbus_info_store, PSU_MFR_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_min, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_VIN_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_max, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_VIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_min, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_VOUT_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_max, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_VOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iin_max, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_IIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iout_max, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_IOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pin_max, S_IWUSR|S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_PIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pout_max, S_IWUSR| S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_MFR_POUT_MAX); + +/*Duplicate nodes for lm-sensors.*/ +static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_P_OUT_UV); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_FAN1_SPEED); +static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, pmbus_info_show, pmbus_info_store, PSU_TEMP_FAULT); + + +static struct attribute *as7716_32xb_pmbus_attributes[] = { + &sensor_dev_attr_psu_power_on.dev_attr.attr, + &sensor_dev_attr_psu_temp_fault.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, + &sensor_dev_attr_psu_over_temp.dev_attr.attr, + &sensor_dev_attr_psu_v_out.dev_attr.attr, + &sensor_dev_attr_psu_i_out.dev_attr.attr, + &sensor_dev_attr_psu_p_out.dev_attr.attr, + &sensor_dev_attr_psu_temp1_input.dev_attr.attr, + &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, + &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, + &sensor_dev_attr_psu_fan_dir.dev_attr.attr, + &sensor_dev_attr_psu_pmbus_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_id.dev_attr.attr, + &sensor_dev_attr_psu_mfr_model.dev_attr.attr, + &sensor_dev_attr_psu_mfr_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iout_max.dev_attr.attr, + /*Duplicate nodes for lm-sensors.*/ + &sensor_dev_attr_power1_input.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + NULL +}; + + +static ssize_t pmbus_info_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_pmbus_data *data = i2c_get_clientdata(client); + int status = -EINVAL; + //printk("pmbus_info_show\n"); + printk("attr->index=%d\n", attr->index); + mutex_lock(&data->update_lock); + switch (attr->index) + { + case PSU_POWER_ON: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->power_on); + break; + case PSU_TEMP_FAULT: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->temp_fault); + break; + case PSU_POWER_GOOD: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->power_good); + break; + case PSU_FAN1_FAULT: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->fan_fault); + break; + case PSU_FAN_DIRECTION: + status=snprintf(buf, PAGE_SIZE-1, "%s\r\n", data->fan_dir); + break; + case PSU_OVER_TEMP: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->over_temp); + break; + case PSU_V_OUT: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->v_out); + break; + case PSU_I_OUT: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->i_out); + break; + case PSU_P_OUT: + printk("read PSU_P_OUT\n"); + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->p_out); + break; + case PSU_P_OUT_UV: + printk("read PSU_P_OUT_UV\n"); + status=snprintf(buf, PAGE_SIZE-1, "%ld\r\n", data->p_out * 1000000); + break; + case PSU_TEMP1_INPUT: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->temp); + break; + case PSU_FAN1_SPEED: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->fan_speed); + break; + case PSU_FAN1_DUTY_CYCLE: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->fan_duty_cycle); + break; + case PSU_PMBUS_REVISION: + break; + case PSU_MFR_ID: + status=snprintf(buf, PAGE_SIZE-1, "%s\r\n", data->mfr_id); + break; + case PSU_MFR_MODEL: + status=snprintf(buf, PAGE_SIZE-1, "%s\r\n", data->mfr_model); + break; + case PSU_MFR_REVISION: + status=snprintf(buf, PAGE_SIZE-1, "%s\r\n", data->mfr_revision); + break; + case PSU_MFR_VIN_MIN: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->mfr_vin_min); + break; + case PSU_MFR_VIN_MAX: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->mfr_vin_max); + break; + case PSU_MFR_VOUT_MIN: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->mfr_vin_max); + break; + case PSU_MFR_VOUT_MAX: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->mfr_vout_max); + break; + case PSU_MFR_IIN_MAX: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->mfr_iin_max); + break; + case PSU_MFR_IOUT_MAX: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->mfr_iout_max); + break; + case PSU_MFR_PIN_MAX: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->mfr_pin_max); + break; + case PSU_MFR_POUT_MAX: + status=snprintf(buf, PAGE_SIZE-1, "%d\r\n", data->mfr_pout_max); + break; + default : + break; + } + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t pmbus_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_pmbus_data *data = i2c_get_clientdata(client); + long keyin = 0; + int status = -EINVAL; + //printk("pmbus_info_store\n"); + //printk("attr->index=%d\n", attr->index); + mutex_lock(&data->update_lock); + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + switch (attr->index) + { + case PSU_POWER_ON: + data->power_on=keyin; + break; + case PSU_TEMP_FAULT: + data->temp_fault=keyin; + break; + case PSU_POWER_GOOD: + data->power_good=keyin; + break; + case PSU_FAN1_FAULT: + break; + case PSU_FAN_DIRECTION: + memcpy(data->fan_dir, buf, sizeof(data->fan_dir)); + break; + case PSU_OVER_TEMP: + data->over_temp=keyin; + break; + case PSU_V_OUT: + data->v_out=keyin; + break; + case PSU_I_OUT: + data->i_out=keyin; + break; + case PSU_P_OUT: + printk("data->p_out=%d\n", data->p_out); + data->p_out=keyin; + break; + case PSU_P_OUT_UV: + //multiplier = 1000000; /*For lm-sensors, unit is micro-Volt.*/ + + break; + case PSU_TEMP1_INPUT: + data->temp=keyin; + break; + case PSU_FAN1_SPEED: + data->fan_speed=keyin; + break; + case PSU_FAN1_DUTY_CYCLE: + break; + case PSU_PMBUS_REVISION: + data->pmbus_revision=keyin; + break; + case PSU_MFR_ID: + memcpy(data->mfr_id, buf, sizeof(data->mfr_id)); + break; + case PSU_MFR_MODEL: + memcpy(data->mfr_model, buf, sizeof(data->mfr_model)); + break; + case PSU_MFR_REVISION: + memcpy(data->mfr_revision, buf, sizeof(data->mfr_revision)); + break; + case PSU_MFR_VIN_MIN: + data->mfr_vin_min=keyin; + break; + case PSU_MFR_VIN_MAX: + data->mfr_vin_max=keyin; + break; + case PSU_MFR_VOUT_MIN: + data->mfr_vout_min=keyin; + break; + case PSU_MFR_VOUT_MAX: + data->mfr_vout_max=keyin; + break; + case PSU_MFR_IIN_MAX: + data->mfr_iin_max=keyin; + break; + case PSU_MFR_IOUT_MAX: + data->mfr_iout_max=keyin; + break; + case PSU_MFR_PIN_MAX: + data->mfr_pin_max=keyin; + break; + case PSU_MFR_POUT_MAX: + data->mfr_pout_max=keyin; + break; + default : + break; + } + mutex_unlock(&data->update_lock); + return count; +} + + +static const struct attribute_group as7716_32xb_pmbus_group = { + .attrs = as7716_32xb_pmbus_attributes, +}; + +static int as7716_32xb_pmbus_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32xb_pmbus_data *data; + int status; + + data = kzalloc(sizeof(struct as7716_32xb_pmbus_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + i2c_set_clientdata(client, data); + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32xb_pmbus_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: pmbus '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_pmbus_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32xb_pmbus_remove(struct i2c_client *client) +{ + struct as7716_32xb_pmbus_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_pmbus_group); + kfree(data); + + return 0; +} + + +static const struct i2c_device_id as7716_32xb_pmbus_id[] = { + { "as7716_32xb_pmbus", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32xb_pmbus_id); + +static struct i2c_driver as7716_32xb_pmbus_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32xb_pmbus", + }, + .probe = as7716_32xb_pmbus_probe, + .remove = as7716_32xb_pmbus_remove, + .id_table = as7716_32xb_pmbus_id, + .address_list = normal_i2c, +}; + + + + + + +static int __init as7716_32xb_pmbus_init(void) +{ + return i2c_add_driver(&as7716_32xb_pmbus_driver); +} + +static void __exit as7716_32xb_pmbus_exit(void) +{ + i2c_del_driver(&as7716_32xb_pmbus_driver); +} + +module_init(as7716_32xb_pmbus_init); +module_exit(as7716_32xb_pmbus_exit); + +MODULE_AUTHOR("Jostar yang "); +MODULE_DESCRIPTION("as7716_32xb_pmbus driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_psu.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_psu.c new file mode 100755 index 000000000000..01756e8596eb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_psu.c @@ -0,0 +1,355 @@ +/* + * An hwmon driver for accton as7716_32xbb Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_MODEL_NAME 16 +#define DC12V_FAN_DIR_OFFSET 0x34 +#define DC12V_FAN_DIR_LEN 3 +#define STRING_TO_DEC_VALUE 10 + +//static ssize_t show_string(struct device *dev, struct device_attribute *da, char *buf); +static int as7716_32xb_psu_read_block(struct i2c_client *client, u8 command, u8 *data,int data_len); +extern int as7716_32xb_cpld_read (unsigned short cpld_addr, u8 reg); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7716_32xb_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ + u8 present; + u8 power_good; + char model_name[MAX_MODEL_NAME+1]; /* Model name, read from eeprom */ + char fan_dir[DC12V_FAN_DIR_LEN+1]; /* DC12V fan direction */ +}; + +enum as7716_32xb_psu_sysfs_attributes { + PSU_PRESENT, + PSU_MODEL_NAME, + PSU_POWER_GOOD, + PSU_FAN_DIR /* For DC12V only */ +}; + +/* sysfs attributes for hwmon + */ +static ssize_t psu_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t psu_info_show(struct device *dev, struct device_attribute *da, + char *buf); +static SENSOR_DEVICE_ATTR(psu_present, S_IWUSR|S_IRUGO, psu_info_show, psu_info_store, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_model_name, S_IWUSR|S_IRUGO, psu_info_show, psu_info_store, PSU_MODEL_NAME); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IWUSR|S_IRUGO, psu_info_show, psu_info_store, PSU_POWER_GOOD); +static SENSOR_DEVICE_ATTR(psu_fan_dir, S_IWUSR|S_IRUGO, psu_info_show, psu_info_store, PSU_FAN_DIR); + + +static struct attribute *as7716_32xb_psu_attributes[] = { + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_model_name.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + &sensor_dev_attr_psu_fan_dir.dev_attr.attr, + NULL +}; + +static ssize_t psu_info_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_psu_data *data = i2c_get_clientdata(client); + int status = -EINVAL; + //printk("psu_info_show\n"); + // printk("attr->index=%d\n", attr->index); + mutex_lock(&data->update_lock); + switch (attr->index) + { + case PSU_PRESENT: + //printk("data->present=%d\n",data->present); + status = snprintf(buf, PAGE_SIZE - 1, "%d\r\n", data->present); + break; + case PSU_MODEL_NAME: + //printk("data->model_name=%s\n",data->model_name); + status = snprintf(buf, PAGE_SIZE - 1, "%s\r\n", data->model_name); + break; + case PSU_POWER_GOOD: + // printk("data->present=%d\n",data->power_good); + status = snprintf(buf, PAGE_SIZE - 1, "%d\r\n", data->power_good); + break; + case PSU_FAN_DIR: + //printk("data->fan_dir=%s\n",data->fan_dir); + status = snprintf(buf, PAGE_SIZE - 1, "%s\r\n", data->fan_dir); + break; + default : + break; + } + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t psu_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_psu_data *data = i2c_get_clientdata(client); + long keyin = 0; + int status = -EINVAL; + //printk("psu_info_store\n"); + //printk("attr->index=%d\n", attr->index); + mutex_lock(&data->update_lock); + switch (attr->index) + { + case PSU_PRESENT: + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if (status) + goto fail_exit; + if (keyin > 1 || keyin < 0) + goto fail_exit; + data->present=keyin; + break; + case PSU_MODEL_NAME: + memcpy(data->model_name, buf, MAX_MODEL_NAME); + break; + case PSU_POWER_GOOD: + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + if (status) + goto fail_exit; + if (keyin > 1 || keyin < 0) + goto fail_exit; + data->power_good=keyin; + break; + case PSU_FAN_DIR: + memcpy(data->fan_dir, buf, DC12V_FAN_DIR_LEN); + break; + default : + goto fail_exit; + } + mutex_unlock(&data->update_lock); + return count; + +fail_exit: + mutex_unlock(&data->update_lock); + return -EINVAL; +} + +static const struct attribute_group as7716_32xb_psu_group = { + .attrs = as7716_32xb_psu_attributes, +}; + +static int as7716_32xb_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32xb_psu_data *data; + int status; + + data = kzalloc(sizeof(struct as7716_32xb_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32xb_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32xb_psu_remove(struct i2c_client *client) +{ + struct as7716_32xb_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as7716_32xb_psu1, + as7716_32xb_psu2 +}; + +static const struct i2c_device_id as7716_32xb_psu_id[] = { + { "as7716_32xb_psu1", as7716_32xb_psu1 }, + { "as7716_32xb_psu2", as7716_32xb_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32xb_psu_id); + +static struct i2c_driver as7716_32xb_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32xb_psu", + }, + .probe = as7716_32xb_psu_probe, + .remove = as7716_32xb_psu_remove, + .id_table = as7716_32xb_psu_id, + .address_list = normal_i2c, +}; + +static int as7716_32xb_psu_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = 0; + int retry_count = 5; + + while (retry_count) { + retry_count--; + + result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) { + msleep(10); + continue; + } + + if (unlikely(result != data_len)) { + result = -EIO; + msleep(10); + continue; + } + + result = 0; + break; + } + + return result; +} + +enum psu_type { + PSU_TYPE_AC_110V, + PSU_TYPE_DC_48V, + PSU_TYPE_DC_12V +}; + +struct model_name_info { + enum psu_type type; + u8 offset; + u8 length; + char* model_name; +}; + +struct model_name_info models[] = { +{PSU_TYPE_AC_110V, 0x20, 8, "YM-2651Y"}, +{PSU_TYPE_DC_48V, 0x20, 8, "YM-2651V"}, +{PSU_TYPE_DC_12V, 0x00, 11, "PSU-12V-750"}, +}; + +static int as7716_32xb_psu_model_name_get(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_psu_data *data = i2c_get_clientdata(client); + int i, status; + + for (i = 0; i < ARRAY_SIZE(models); i++) { + memset(data->model_name, 0, sizeof(data->model_name)); + + status = as7716_32xb_psu_read_block(client, models[i].offset, + data->model_name, models[i].length); + if (status < 0) { + data->model_name[0] = '\0'; + dev_dbg(&client->dev, "unable to read model name from (0x%x) offset(0x%x)\n", + client->addr, models[i].offset); + return status; + } + else { + data->model_name[models[i].length] = '\0'; + } + + /* Determine if the model name is known, if not, read next index + */ + if (strncmp(data->model_name, models[i].model_name, models[i].length) == 0) { + return 0; + } + else { + data->model_name[0] = '\0'; + } + } + + return -ENODATA; +} + +static int __init as7716_32xb_psu_init(void) +{ + return i2c_add_driver(&as7716_32xb_psu_driver); +} + +static void __exit as7716_32xb_psu_exit(void) +{ + i2c_del_driver(&as7716_32xb_psu_driver); +} + +module_init(as7716_32xb_psu_init); +module_exit(as7716_32xb_psu_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7716_32xb_psu driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_sfp.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_sfp.c new file mode 100755 index 000000000000..9c7a05632154 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_sfp.c @@ -0,0 +1,365 @@ +/* + * An hwmon driver for accton as7716_32x sfp + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BIT_INDEX(i) (1UL << (i)) +#define I2C_ADDR_CPLD1 0x60 +#define I2C_ADDR_CPLD2 0x62 +#define I2C_ADDR_CPLD3 0x64 +#define CPLD1_OFFSET_QSFP_PRESET1 0x30 +#define CPLD1_OFFSET_QSFP_PRESET2 0x31 +#define CPLD1_OFFSET_QSFP_PRESET3 0x32 +#define CPLD1_OFFSET_QSFP_PRESET4 0x33 + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7716_32x_sfp_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + int port; /* Front port index */ + char eeprom[256]; /* eeprom data */ + u32 is_present; /* present status */ +}; + +static struct as7716_32x_sfp_data *as7716_32x_sfp_update_device(struct device *dev); +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_present(struct device *dev, struct device_attribute *da,char *buf); +static ssize_t show_eeprom(struct device *dev, struct device_attribute *da, char *buf); +extern int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +enum as7716_32x_sfp_sysfs_attributes { + SFP_PORT_NUMBER, + SFP_IS_PRESENT, + SFP_IS_PRESENT_ALL, + SFP_EEPROM +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(sfp_port_number, S_IRUGO, show_port_number, NULL, SFP_PORT_NUMBER); +static SENSOR_DEVICE_ATTR(sfp_is_present, S_IRUGO, show_present, NULL, SFP_IS_PRESENT); +static SENSOR_DEVICE_ATTR(sfp_is_present_all, S_IRUGO, show_present, NULL, SFP_IS_PRESENT_ALL); +static SENSOR_DEVICE_ATTR(sfp_eeprom, S_IRUGO, show_eeprom, NULL, SFP_EEPROM); + +static struct attribute *as7716_32x_sfp_attributes[] = { + &sensor_dev_attr_sfp_port_number.dev_attr.attr, + &sensor_dev_attr_sfp_is_present.dev_attr.attr, + &sensor_dev_attr_sfp_is_present_all.dev_attr.attr, + &sensor_dev_attr_sfp_eeprom.dev_attr.attr, + NULL +}; + +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_sfp_data *data = i2c_get_clientdata(client); + + return sprintf(buf, "%d\n", data->port+1); +} + +/* Error-check the CPLD read results. */ +#define VALIDATED_READ(_buf, _rv, _read_expr, _invert) \ +do { \ + _rv = (_read_expr); \ + if(_rv < 0) { \ + return sprintf(_buf, "READ ERROR\n"); \ + } \ + if(_invert) { \ + _rv = ~_rv; \ + } \ + _rv &= 0xFF; \ +} while(0) + +static ssize_t show_present(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + + if(attr->index == SFP_IS_PRESENT_ALL) { + int values[4]; + /* + * Report the SFP_PRESENCE status for all ports. + */ + + /* QSFP_PRESENT Ports 1-8 */ + //VALIDATED_READ(buf, values[0], accton_i2c_cpld_read(0x62, 0x9), 1); + VALIDATED_READ(buf, values[0], accton_i2c_cpld_read(I2C_ADDR_CPLD1, CPLD1_OFFSET_QSFP_PRESET1), 1); + /* QSFP_PRESENT Ports 9-16 */ + VALIDATED_READ(buf, values[1], accton_i2c_cpld_read(I2C_ADDR_CPLD1, CPLD1_OFFSET_QSFP_PRESET2), 1); + /* QSFP_PRESENT Ports 17-24 */ + VALIDATED_READ(buf, values[2], accton_i2c_cpld_read(I2C_ADDR_CPLD1, CPLD1_OFFSET_QSFP_PRESET3), 1); + /* QSFP_PRESENT Ports 25-32 */ + VALIDATED_READ(buf, values[3], accton_i2c_cpld_read(I2C_ADDR_CPLD1, CPLD1_OFFSET_QSFP_PRESET4), 1); + + /* Return values 1 -> 32 in order */ + return sprintf(buf, "%.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], values[3]); + } + else { /* SFP_IS_PRESENT */ + struct as7716_32x_sfp_data *data = as7716_32x_sfp_update_device(dev); + + if (!data->valid) { + printk("return -EIO\n"); + return -EIO; + } + + return sprintf(buf, "%d\n", data->is_present); + } +} + +static ssize_t show_eeprom(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct as7716_32x_sfp_data *data = as7716_32x_sfp_update_device(dev); + + if (!data->valid) { + return 0; + } + + if (!data->is_present) { + return 0; + } + + memcpy(buf, data->eeprom, sizeof(data->eeprom)); + + return sizeof(data->eeprom); +} + +static const struct attribute_group as7716_32x_sfp_group = { + .attrs = as7716_32x_sfp_attributes, +}; + +static int as7716_32x_sfp_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32x_sfp_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7716_32x_sfp_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + mutex_init(&data->update_lock); + data->port = dev_id->driver_data; + i2c_set_clientdata(client, data); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32x_sfp_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: sfp '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32x_sfp_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32x_sfp_remove(struct i2c_client *client) +{ + struct as7716_32x_sfp_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32x_sfp_group); + kfree(data); + + return 0; +} + +enum port_numbers { +as7716_32x_sfp1, as7716_32x_sfp2, as7716_32x_sfp3, as7716_32x_sfp4, +as7716_32x_sfp5, as7716_32x_sfp6, as7716_32x_sfp7, as7716_32x_sfp8, +as7716_32x_sfp9, as7716_32x_sfp10,as7716_32x_sfp11,as7716_32x_sfp12, +as7716_32x_sfp13,as7716_32x_sfp14,as7716_32x_sfp15,as7716_32x_sfp16, +as7716_32x_sfp17,as7716_32x_sfp18,as7716_32x_sfp19,as7716_32x_sfp20, +as7716_32x_sfp21,as7716_32x_sfp22,as7716_32x_sfp23,as7716_32x_sfp24, +as7716_32x_sfp25,as7716_32x_sfp26,as7716_32x_sfp27,as7716_32x_sfp28, +as7716_32x_sfp29,as7716_32x_sfp30,as7716_32x_sfp31,as7716_32x_sfp32 +}; + +static const struct i2c_device_id as7716_32x_sfp_id[] = { +{ "as7716_32x_sfp1", as7716_32x_sfp1 }, { "as7716_32x_sfp2", as7716_32x_sfp2 }, +{ "as7716_32x_sfp3", as7716_32x_sfp3 }, { "as7716_32x_sfp4", as7716_32x_sfp4 }, +{ "as7716_32x_sfp5", as7716_32x_sfp5 }, { "as7716_32x_sfp6", as7716_32x_sfp6 }, +{ "as7716_32x_sfp7", as7716_32x_sfp7 }, { "as7716_32x_sfp8", as7716_32x_sfp8 }, +{ "as7716_32x_sfp9", as7716_32x_sfp9 }, { "as7716_32x_sfp10", as7716_32x_sfp10 }, +{ "as7716_32x_sfp11", as7716_32x_sfp11 }, { "as7716_32x_sfp12", as7716_32x_sfp12 }, +{ "as7716_32x_sfp13", as7716_32x_sfp13 }, { "as7716_32x_sfp14", as7716_32x_sfp14 }, +{ "as7716_32x_sfp15", as7716_32x_sfp15 }, { "as7716_32x_sfp16", as7716_32x_sfp16 }, +{ "as7716_32x_sfp17", as7716_32x_sfp17 }, { "as7716_32x_sfp18", as7716_32x_sfp18 }, +{ "as7716_32x_sfp19", as7716_32x_sfp19 }, { "as7716_32x_sfp20", as7716_32x_sfp20 }, +{ "as7716_32x_sfp21", as7716_32x_sfp21 }, { "as7716_32x_sfp22", as7716_32x_sfp22 }, +{ "as7716_32x_sfp23", as7716_32x_sfp23 }, { "as7716_32x_sfp24", as7716_32x_sfp24 }, +{ "as7716_32x_sfp25", as7716_32x_sfp25 }, { "as7716_32x_sfp26", as7716_32x_sfp26 }, +{ "as7716_32x_sfp27", as7716_32x_sfp27 }, { "as7716_32x_sfp28", as7716_32x_sfp28 }, +{ "as7716_32x_sfp29", as7716_32x_sfp29 }, { "as7716_32x_sfp30", as7716_32x_sfp30 }, +{ "as7716_32x_sfp31", as7716_32x_sfp31 }, { "as7716_32x_sfp32", as7716_32x_sfp32 }, +{} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32x_sfp_id); + +static struct i2c_driver as7716_32x_sfp_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32x_sfp", + }, + .probe = as7716_32x_sfp_probe, + .remove = as7716_32x_sfp_remove, + .id_table = as7716_32x_sfp_id, + .address_list = normal_i2c, +}; + +static int as7716_32x_sfp_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) + goto abort; + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + + result = 0; + +abort: + return result; +} + +static struct as7716_32x_sfp_data *as7716_32x_sfp_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32x_sfp_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status = -1; + int i = 0; + u8 cpld_reg = 0x30 + (data->port/8); + + data->valid = 0; + + /* Read present status of the specified port number */ + data->is_present = 0; + status = accton_i2c_cpld_read(I2C_ADDR_CPLD1, cpld_reg); + + if (status < 0) { + dev_dbg(&client->dev, "cpld(0x%x) reg(0x%x) err %d\n", I2C_ADDR_CPLD1, cpld_reg, status); + goto exit; + } + + data->is_present = (status & (1 << (data->port % 8))) ? 0 : 1; + printk("data->is_present=%d, data->port=%d, status=0x%x\n",data->is_present, data->port, status); + /* Read eeprom data based on port number */ + memset(data->eeprom, 0, sizeof(data->eeprom)); + + /* Check if the port is present */ + if (data->is_present) { + /* read eeprom */ + for (i = 0; i < sizeof(data->eeprom)/I2C_SMBUS_BLOCK_MAX; i++) { + status = as7716_32x_sfp_read_block(client, i*I2C_SMBUS_BLOCK_MAX, + data->eeprom+(i*I2C_SMBUS_BLOCK_MAX), + I2C_SMBUS_BLOCK_MAX); + if (status < 0) { + printk("unable to read eeprom from port(%d)\n", data->port); + dev_dbg(&client->dev, "unable to read eeprom from port(%d)\n", data->port); + goto exit; + } + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init as7716_32x_sfp_init(void) +{ + //extern int platform_accton_as7716_32x(void); + //if (!platform_accton_as7716_32x()) { +// return -ENODEV; + //} + + return i2c_add_driver(&as7716_32x_sfp_driver); +} + +static void __exit as7716_32x_sfp_exit(void) +{ + i2c_del_driver(&as7716_32x_sfp_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton as7716_32x_sfp driver"); +MODULE_LICENSE("GPL"); + +module_init(as7716_32x_sfp_init); +module_exit(as7716_32x_sfp_exit); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_sys.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_sys.c new file mode 100755 index 000000000000..f0a8125139cc --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_sys.c @@ -0,0 +1,243 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STRING_TO_DEC_VALUE 10 +#define EEPROM_DATA_SIZE 256 + + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; +#define MAX_PORT_NAME_LEN 20 +/* Each client has this additional data + */ +struct as7716_32xb_sys_data { + struct device *hwmon_dev; + struct mutex lock; + u8 index; + unsigned char eeprom[EEPROM_DATA_SIZE]; +}; + + +/* sysfs attributes for hwmon + */ + +static ssize_t sys_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t sys_info_show(struct device *dev, struct device_attribute *da, + char *buf); + +static SENSOR_DEVICE_ATTR(eeprom, S_IWUSR|S_IRUGO, sys_info_show, sys_info_store, 0); + + + +static struct attribute *as7716_32xb_sys_attributes[] = { + &sensor_dev_attr_eeprom.dev_attr.attr, + NULL +}; + + +static ssize_t sys_info_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + //struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_sys_data *data = i2c_get_clientdata(client); +// int status = -EINVAL; + int i; + + //printk("sys_info_show\n"); + // printk("attr->index=%d\n", attr->index); + mutex_lock(&data->lock); + //for(i=0; i<8; i++) + // printk("data->eeprom[%d]=0x%x ",i, data->eeprom[i]); + //printk("\n"); + memcpy(buf, data->eeprom, EEPROM_DATA_SIZE); + //for(i=0; i < EEPROM_DATA_SIZE ; i++) + //{ + // buf[i]=data->eeprom[i]; + // printk("buf[%d]=0x%x ",i, buf[i]); + //} + //status = EEPROM_DATA_SIZE+1; + + //printk("\n"); + //status = sprintf(buf, "%x", 0xA); + //data->eeprom[0]=0x0d; + //data->eeprom[1]=0x0; + //data->eeprom[2]=0x06; + // buf[3]=0xFF; + + // for(i=0; i< 16; i++) + // printk("buf[%d]=0x%x ",i, buf[i]); + //printk("\n"); + + memcpy(buf, data->eeprom, 256); + + + mutex_unlock(&data->lock); + + return 256; +} + +static ssize_t sys_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t size) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_sys_data *data = i2c_get_clientdata(client); + int i=0, j=0, k=0; + unsigned char str[3]; + unsigned int val; + + //printk("sys_info_store\n"); + //printk("attr->index=%d\n", attr->index); + //printk("buf[0]=0x%x, buf[1]=0x%x, buf[2]=0x%x, buf[3]=0x%x\n", buf[0], buf[1], buf[2], buf[3]); + + // printk("strlen(buf)=%d\n",strlen(buf)); + k=0; + mutex_lock(&data->lock); + memset(data->eeprom, 0xFF, EEPROM_DATA_SIZE); + memset(str, 0x0, 3); + if(strlen(buf) >= 256 ) + { + for(i=0; i < strlen(buf) ; i++) + { + // printk("i=%d ", i); + for(j=0;j<2; j++) + { + str[j]=buf[i+j]; + } + sscanf(str, "%x", &val); + // printk("str=%s val=0x%x ", str, val); + i=j+i-1; + if(k>=EEPROM_DATA_SIZE) + { + break; + } + data->eeprom[k]=(unsigned char)val; + // printk("data->eeprom[%d]=0x%x\n",k, data->eeprom[k]); + k++; + } + } + //printk("buf=\n"); + //for(i=0; i < strlen(buf) ; i++) + //{ + // printk("%c%c ", buf[i], buf[i+1]); + // if((i % 31)==0) + // printk("\n"); + //} + //printk("\n"); + + //printk("eeprom[0]=0x%x, eeprom[1]=0x%x, eeprom[2]=0x%x, eeprom[3]=0x%x\n", + // data->eeprom[0], data->eeprom[1], data->eeprom[2], data->eeprom[3]); + + mutex_unlock(&data->lock); + return size; + +} + +static const struct attribute_group as7716_32xb_sys_group = { + .attrs = as7716_32xb_sys_attributes, +}; + +static int as7716_32xb_sys_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32xb_sys_data *data; + int status; + + data = kzalloc(sizeof(struct as7716_32xb_sys_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + i2c_set_clientdata(client, data); + data->index = dev_id->driver_data; + mutex_init(&data->lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32xb_sys_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: sys '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_sys_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32xb_sys_remove(struct i2c_client *client) +{ + struct as7716_32xb_sys_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_sys_group); + kfree(data); + + return 0; +} + + +static const struct i2c_device_id as7716_32xb_sys_id[] = { + { "as7716_32xb_sys", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32xb_sys_id); + +static struct i2c_driver as7716_32xb_sys_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32xb_sys", + }, + .probe = as7716_32xb_sys_probe, + .remove = as7716_32xb_sys_remove, + .id_table = as7716_32xb_sys_id, + .address_list = normal_i2c, +}; + + + + + + +static int __init as7716_32xb_sys_init(void) +{ + return i2c_add_driver(&as7716_32xb_sys_driver); +} + +static void __exit as7716_32xb_sys_exit(void) +{ + i2c_del_driver(&as7716_32xb_sys_driver); +} + +module_init(as7716_32xb_sys_init); +module_exit(as7716_32xb_sys_exit); + +MODULE_AUTHOR("Jostar yang "); +MODULE_DESCRIPTION("as7716_32xb_sys driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_thermal.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_thermal.c new file mode 100755 index 000000000000..d42341bb181a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_as7716_32xb_thermal.c @@ -0,0 +1,214 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define STRING_TO_DEC_VALUE 10 +#define STRING_TO_HEX_VALUE 16 + +#define TEMP1_MAX_HYST_DEFAULT 75000 +#define TEMP1_MAX_DEFAULT 80000 +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7716_32xb_thermal_data { + struct device *hwmon_dev; + struct mutex update_lock; + u8 index; + unsigned int temp1_input; + unsigned int temp1_max_hyst; + unsigned int temp1_max; +}; + + + +enum as7716_32xb_thermal_sysfs_attributes { + TEMP1_INPUT, + TEMP1_MAX_HYST, + TEMP1_MAX +}; + +/* sysfs attributes for hwmon + */ + +static ssize_t temp_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t temp_info_show(struct device *dev, struct device_attribute *da, + char *buf); +static SENSOR_DEVICE_ATTR(temp1_input, S_IWUSR|S_IRUGO, temp_info_show, temp_info_store, TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO, temp_info_show, temp_info_store, TEMP1_MAX_HYST); +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, temp_info_show, temp_info_store, TEMP1_MAX); + + +static struct attribute *as7716_32xb_thermal_attributes[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, + &sensor_dev_attr_temp1_max.dev_attr.attr, + NULL +}; + + +static ssize_t temp_info_show(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_thermal_data *data = i2c_get_clientdata(client); + int status = -EINVAL; + + mutex_lock(&data->update_lock); + switch (attr->index) + { + case TEMP1_INPUT: + status = snprintf(buf, PAGE_SIZE - 1, "%d\r\n", data->temp1_input); + break; + case TEMP1_MAX_HYST: + status = snprintf(buf, PAGE_SIZE - 1, "%d\r\n", TEMP1_MAX_HYST_DEFAULT); + break; + case TEMP1_MAX: + status = snprintf(buf, PAGE_SIZE - 1, "%d\r\n", TEMP1_MAX_DEFAULT); + break; + default : + break; + } + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t temp_info_store(struct device *dev, struct device_attribute *da, + const char *buf, size_t size) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct as7716_32xb_thermal_data *data = i2c_get_clientdata(client); + long keyin = 0; + int status = -EINVAL; + + mutex_lock(&data->update_lock); + status = kstrtol(buf, STRING_TO_DEC_VALUE, &keyin); + switch (attr->index) + { + case TEMP1_INPUT: + data->temp1_input=keyin; + break; + case TEMP1_MAX_HYST: + data->temp1_max_hyst=keyin; + break; + case TEMP1_MAX: + data->temp1_max=keyin; + break; + default : + break; + } + mutex_unlock(&data->update_lock); + return size; + +} + +static const struct attribute_group as7716_32xb_thermal_group = { + .attrs = as7716_32xb_thermal_attributes, +}; + +static int as7716_32xb_thermal_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7716_32xb_thermal_data *data; + int status; + + data = kzalloc(sizeof(struct as7716_32xb_thermal_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + i2c_set_clientdata(client, data); + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7716_32xb_thermal_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: thermal '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_thermal_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7716_32xb_thermal_remove(struct i2c_client *client) +{ + struct as7716_32xb_thermal_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7716_32xb_thermal_group); + kfree(data); + + return 0; +} + + +static const struct i2c_device_id as7716_32xb_thermal_id[] = { + { "as7716_32xb_thermal", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7716_32xb_thermal_id); + +static struct i2c_driver as7716_32xb_thermal_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7716_32xb_thermal", + }, + .probe = as7716_32xb_thermal_probe, + .remove = as7716_32xb_thermal_remove, + .id_table = as7716_32xb_thermal_id, + .address_list = normal_i2c, +}; + + + + + + +static int __init as7716_32xb_thermal_init(void) +{ + return i2c_add_driver(&as7716_32xb_thermal_driver); +} + +static void __exit as7716_32xb_thermal_exit(void) +{ + i2c_del_driver(&as7716_32xb_thermal_driver); +} + +module_init(as7716_32xb_thermal_init); +module_exit(as7716_32xb_thermal_exit); + +MODULE_AUTHOR("Jostar yang "); +MODULE_DESCRIPTION("as7716_32xb_thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_i2c_cpld.c b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_i2c_cpld.c new file mode 100755 index 000000000000..46d1e2773287 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/modules/accton_i2c_cpld.c @@ -0,0 +1,259 @@ +/* + * A hwmon driver for the accton_i2c_cpld + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define CPLD_VERSION_REG 0x1 + +enum as5712_54x_cpld_sysfs_attributes { + CPLD_READ_VERSION, + CPLD_BYTE_ACCESS, + CPLD_DUMP_ALL, +}; + +static ssize_t read_cpld_version(struct device *dev, struct device_attribute *da, + char *buf); +int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg); + + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +/* Addresses scanned for accton_i2c_cpld + */ +static const unsigned short normal_i2c[] = { 0x31, 0x35, 0x60, 0x61, 0x62, I2C_CLIENT_END }; + +static SENSOR_DEVICE_ATTR(cpld_get_version, S_IRUGO, read_cpld_version, NULL, CPLD_READ_VERSION); + +static struct attribute *as5712_54x_cpld_attributes[] = { + &sensor_dev_attr_cpld_get_version.dev_attr.attr, + NULL +}; + +static const struct attribute_group as5712_54x_cpld_group = { + .attrs = as5712_54x_cpld_attributes, +}; + +static ssize_t read_cpld_version(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + unsigned short cpld_reg = CPLD_VERSION_REG; + u8 reg; + + if(attr->index == CPLD_READ_VERSION) { + reg = accton_i2c_cpld_read(client->addr, cpld_reg); + return sprintf(buf, "%02x\n",reg); + } + return -1 ; +} + + +static void accton_i2c_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void accton_i2c_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static int accton_i2c_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&client->dev, "i2c_check_functionality failed (0x%x)\n", client->addr); + status = -EIO; + goto exit; + } + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as5712_54x_cpld_group); + if (status) { + goto exit; + } + + dev_info(&client->dev, "chip found\n"); + accton_i2c_cpld_add_client(client); + + return 0; +exit: + return status; +} + +static int accton_i2c_cpld_remove(struct i2c_client *client) +{ + sysfs_remove_group(&client->dev.kobj, &as5712_54x_cpld_group); + + accton_i2c_cpld_remove_client(client); + return 0; +} + +static const struct i2c_device_id accton_i2c_cpld_id[] = { + { "accton_i2c_cpld", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, accton_i2c_cpld_id); + +static struct i2c_driver accton_i2c_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "accton_i2c_cpld", + }, + .probe = accton_i2c_cpld_probe, + .remove = accton_i2c_cpld_remove, + .id_table = accton_i2c_cpld_id, + .address_list = normal_i2c, +}; + +int accton_i2c_cpld_read(unsigned short cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_read_byte_data(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(accton_i2c_cpld_read); + +int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_write_byte_data(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(accton_i2c_cpld_write); + +static int __init accton_i2c_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&accton_i2c_cpld_driver); +} + +static void __exit accton_i2c_cpld_exit(void) +{ + i2c_del_driver(&accton_i2c_cpld_driver); +} +/* +static struct dmi_system_id as7712_dmi_table[] = { + { + .ident = "Accton AS7712", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Accton"), + DMI_MATCH(DMI_PRODUCT_NAME, "AS7712"), + }, + } +}; + +int platform_accton_as7712_32x(void) +{ + return dmi_check_system(as7712_dmi_table); +} +EXPORT_SYMBOL(platform_accton_as7712_32x); +*/ +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_i2c_cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(accton_i2c_cpld_init); +module_exit(accton_i2c_cpld_exit); diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/service/as7716_32xb-platform-monitor.service b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/service/as7716_32xb-platform-monitor.service new file mode 100755 index 000000000000..05a5d93c48b9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/service/as7716_32xb-platform-monitor.service @@ -0,0 +1,17 @@ +[Unit] +Description=Accton AS7716-32XB Platform Monitoring service +Before=pmon.service +After=sysinit.target +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/local/bin/accton_as7716_32xb_util.py install +ExecStart=/usr/local/bin/accton_as7716_32xb_drv_handler.py +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/setup.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/setup.py new file mode 100755 index 000000000000..3edfc29b3817 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/setup.py @@ -0,0 +1,16 @@ +#!/usr/bin/env python + +import os +import sys +from setuptools import setup +os.listdir + +setup( + name='as7716_32xb', + version='1.0', + description='Module to initialize Accton AS7716-32XB platforms', + + packages=['as7716_32xb'], + package_dir={'as7716_32xb': 'as7716-32xb/classes'}, +) + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/README b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/README new file mode 100755 index 000000000000..c602d753301e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/README @@ -0,0 +1,117 @@ +Copyright (C) 2016 Accton Networks, Inc. + +This program is free software: you can redistribute it and/or modify +It under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +Contents of this package: + patch - files under patch/ is for kernel and ONIE installer + for the kernel: + config-accton-as5712_54x.patch + for kernel configuration. + driver-i2c-muxes-pca954x-always-deselect.patch + for i2c_mux deselects after transaction. + driver-patches-for-accton-as5712-fan-psu-cpld.patch + for as5712's fan/psu/cpld/led/sfp drivers. + for ONIE: + onie_installer-accton-AS5712-54X.patch + for console port setting and copy util script o rootfs. + module - Contains source code of as5712 kernel driver modules. + +The late Sonic building scripts, pushed @Dec 5 2016, will automatically +create a docker container and run building process under it. +User is not necessary to handle docker environment creation. + +1. Download sonic-buildimage environment. + - Run "git clone https://github.com/Azure/sonic-buildimage". + - cd to sonic-buildimage and run "git submodule update --init --recursive". +2. Build kernel + - cd ./src/sonic-linux-kernel + - Copy patches and series from patch/kernel of this release to + sonic-linux-kernel/patch. + - Build kernel by "make". + - The built kernel package, linux-image-3.16.0-4-amd64_3.16.36-1+deb8u2_amd64.deb + , is generated. +3. Build installer + - Change directory back to sonic-buildimage/. + - Get onie_installer-accton-AS5712-54X.patch" from patch/installer. + - Change setting for AS5712-54X by patching build_image.sh. + "patch -p1 < onie_installer-accton-AS5712-54X.patch" + !!NOTICE, patching onie_installer-accton-AS5712-54X.patch comments out the + "git status" checking at build_image.sh. + - The account and password of installed OS can be given at rules/config. + The default user and password are "admin" & "YourPaSsWoRd" respectively. + - Run "make configure PLATFORM=broadcom" + - Copy the built kernel debian package to target/debs/. + The file is linux-image-3.16.0-4-amd64_*_amd64.deb under directory + src/sonic-linux-kernel/. + - Run "make target/sonic-generic.bin" + - Get the installer, target/sonic-generic.bin, to target machine and install. + +All Linux kernel code is licensed under the GPLv1. All other code is +licensed under the GPLv3. Please see the LICENSE file for copies of +both licenses. + +The code for integacting with Accton AS5712-54X has 2 parts, +kernel drivers and operational script. +The kernel drivers of peripherals are under module/ directory. +1. These drivers are patched into kernel by + driver-patches-for-accton-as5712-fan-psu-cpld.patch + Or you can build the driver under module/ by setting environment variable, + KERNEL_SRC, to proper linux built directory and run make. + It may be sonic-linux-kernel/linux-3.*/debian/build/build_amd64_none_amd64/. +2. A operational script, accton_as5712_util.py, for device initializatian and + peripheral accessing should be installed at /usr/bin. + This script is generated by onie_installer-accton-AS5712-54X.patch. + It's done by patching onie_installer-accton-AS5712-54X.patch at build-image. + Run "accton_as5712_util.py install" to install drivers. + +To initialize the system, run "accton_as5712_util.py install". +To clean up the drivers & devices, run "accton_as5712_util.py clean". +To dump information of sensors, run "accton_as5712_util.py show". +To dump SFP EEPROM, run "accton_as5712_util.py sff". +To set fan speed, run "accton_as5712_util.py set fan". +To enable/disable SFP emission, run "accton_as5712_util.py set sfp". +To set system LEDs' color, run "accton_as5712_util.py set led" +For more information, run "accton_as5712_util.py --help". + +==================================================================== +Besides applying accton_as5712_util.py to access peripherals, you can +access peripherals by sysfs nodes directly after the installation is run. + +System LED: + There are 5 system LEDs at the lower-left corner of front panel. + They are loc, diag, fan, ps1, and ps2. + The sysfs interface color mappings are as follows: + Brightness: + 0 => off + 1 => green + 2 => amber + 3 => red + 4 => blue + But not all colors are available for each LED. + +Fan Control: + There are 10 fans inside 5 fan modules. + All fans share 1 duty setting, ranged from 0~100. + +Thermal sensers: + 3 temperature sensors are controlled by the lm75 kernel modules. + +PSUs: + There 2 power supplies slot at the left/right side of the back. + Once if a PSU is not plugged, the status of it is shown failed. + +There are 48 SFP+ and 6 QSFP modules are equipped. +Before operating on PSU and QSFP+, please make sure it is well plugged. +Otherwise, operation is going to fail. + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_drv_handler.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_drv_handler.py new file mode 100755 index 000000000000..c08a82c7dc45 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_drv_handler.py @@ -0,0 +1,443 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 1/18/2018: Jostar create for as7716_32xb +# ------------------------------------------------------------------ + +try: + import os + import sys, getopt + import subprocess + import click + import imp + import logging + import logging.config + import types + import time # this is only being used as part of the example + import traceback + import commands + from tabulate import tabulate +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +# Deafults +VERSION = '1.0' +FUNCTION_NAME = 'as7716_32xb_drv_handler' +DEBUG = False + +global log_file +global log_level + +def my_log(txt): + if DEBUG == True: + print "[ACCTON DBG]: "+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status = 1 + output = "" + status, output = commands.getstatusoutput(cmd) + if DEBUG == True: + my_log (cmd +" , result:" + str(status)) + else: + if show: + print "ACC: " + str(cmd) + " , result:"+ str(status) + #my_log ("cmd:" + cmd) + #my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + + +# Make a class we can use to capture stdout and sterr in the log +class accton_as7716xb_drv_handler(object): + + QSFP_PORT_START = 1 + QSFP_PORT_END = 32 + BASE_PATH = "/usr/local/bin/" + BASE_I2C_PATH="/sys/bus/i2c/devices/" + QSFP_PRESENT_PATH = "/sys/bus/i2c/devices/0-0060/module_present_" + QSFP_RESET_PATH = "/sys/bus/i2c/devices/0-0060/module_reset_" + QSFP_PRESENT_FILE = "/tmp/ipmi_qsfp_pres" + QSFP_EEPROM_FILE = "/tmp/ipmi_qsfp_ee_" + THERMAL_FILE = "/tmp/ipmi_thermal" + IPMI_CMD_QSFP = "ipmitool raw 0x34 0x10 " + IPMI_CMD_THERMAL = "ipmitool raw 0x34 0x12 " + IPMI_CMD_FAN = "ipmitool raw 0x34 0x14 " + IPMI_CMD_PSU ="ipmitool raw 0x34 0x16 " + IPMI_CMD_SYS_EEPROM_1 ="ipmitool raw 0x34 0x18 0x0 0x80" + IPMI_CMD_SYS_EEPROM_2 ="ipmitool raw 0x34 0x18 0x80 0x80" + FAN_ID_START = 1 + FAN_ID_END = 6 + FAN_FILE = "/tmp/ipmi_fan" + FAN_PATH = "/sys/bus/i2c/devices/0-0066/fan" + PSU_ID_START = 1 + PSU_ID_END = 2 + PSU1_PATH = "/sys/bus/i2c/devices/0-0053/" + PSU2_PATH = "/sys/bus/i2c/devices/0-0050/" + PSU1_PMBUS_PATH = "/sys/bus/i2c/devices/0-005b/" + PSU2_PMBUS_PATH = "/sys/bus/i2c/devices/0-0058/" + PSU_FILE = "/tmp/ipmi_psu_" + SYS_EEPROM_FILE_1 = "/tmp/ipmi_sys_eeprom_1" + SYS_EEPROM_FILE_2 = "/tmp/ipmi_sys_eeprom_2" + SYS_EEPROM_PATH = "/sys/bus/i2c/devices/0-0056/eeprom" + + + def __init__(self, log_file, log_level): + """Needs a logger and a logger level.""" + # set up logging to file + logging.basicConfig( + filename=log_file, + filemode='w', + level=log_level, + format= '[%(asctime)s] {%(pathname)s:%(lineno)d} %(levelname)s - %(message)s', + datefmt='%H:%M:%S' + ) + + # set up logging to console + if log_level == logging.DEBUG: + console = logging.StreamHandler() + console.setLevel(log_level) + formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') + console.setFormatter(formatter) + logging.getLogger('').addHandler(console) + + logging.debug('SET. logfile:%s / loglevel:%d', log_file, log_level) + + def manage_ipmi_qsfp(self): + logging.debug ("drv hanlder-manage_ipmi_qsfp") + print "drv hanlder" + #Handle QSFP case + ipmi_cmd = self.IPMI_CMD_QSFP + " 0x10 > " +self.QSFP_PRESENT_FILE + log_os_system(ipmi_cmd, 0) + file_path = self.QSFP_PRESENT_FILE + check_file = open(file_path) + try: + check_file = open(file_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + line = check_file.readline() + pres_line= line.rstrip().replace(" ","") + while line: + line = check_file.readline() + pres_line+=line.rstrip().replace(" ","") + check_file.close() + + + for i in range(self.QSFP_PORT_START, self.QSFP_PORT_END+1, 1): + if i>1: + k=(i-1)*2 +1 + else: + k=1; + if pres_line[k] == '1': + #Set QSFP present + #print "port-%d present" %i + set_drv_cmd = "echo 1 > " + self.QSFP_PRESENT_PATH + str(i) + log_os_system(set_drv_cmd, 0) + #Read QSFP EEPROM + ipmi_cmd = self.IPMI_CMD_QSFP +str(i)+ " 0x00 > " +self.QSFP_EEPROM_FILE + str(i) + "_1" + log_os_system(ipmi_cmd, 0) + ipmi_cmd = self.IPMI_CMD_QSFP +str(i)+ " 0x01 > " +self.QSFP_EEPROM_FILE + str(i) + "_2" + log_os_system(ipmi_cmd, 0) + file_path = self.QSFP_EEPROM_FILE + str(i) + "_1" + check_file = open(file_path) + try: + check_file = open(file_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + line = check_file.readline() + str_line= line.rstrip().replace(" ","") + while line: + line = check_file.readline() + str_line+=line.rstrip().replace(" ","") + check_file.close() + file_path = self.QSFP_EEPROM_FILE + str(i) + "_2" + check_file = open(file_path) + try: + check_file = open(file_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + line = check_file.readline() + str_line+= line.rstrip().replace(" ","") + + while line: + line = check_file.readline() + str_line+=line.rstrip().replace(" ","") + check_file.close() + #Set QSFP EEPROM + if(i < 10): + set_drv_cmd = "echo " + str_line+ " > " + self.BASE_I2C_PATH + "0-000"+str(i) +"/eeprom" + else: + set_drv_cmd = "echo " + str_line+ " > " + self.BASE_I2C_PATH + "0-00"+str(i) +"/eeprom" + #print(set_drv_cmd) + log_os_system(set_drv_cmd, 0) + else: + ipmi_cmd = "echo 0 > " + self.QSFP_PRESENT_PATH + str(i) + log_os_system(ipmi_cmd, 0) + if(i < 10): + set_drv_cmd = "echo 0 > " + self.BASE_I2C_PATH + "0-000"+str(i) +"/eeprom" + else: + set_drv_cmd = "echo 0 > " + self.BASE_I2C_PATH + "0-00"+str(i) +"/eeprom" + #print(set_drv_cmd) + log_os_system(set_drv_cmd, 0) + + time.sleep(0.01) + return True + + def manage_ipmi_thermal(self): + logging.debug ("drv hanlder-manage_ipmi_thermal") + #Handle thermal case + #ipmitool raw 0x34 0x12 + ipmi_cmd = self.IPMI_CMD_THERMAL + " > " +self.THERMAL_FILE + log_os_system(ipmi_cmd, 0) + file_path = self.THERMAL_FILE + check_file = open(file_path) + try: + check_file = open(file_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + line = check_file.readline() + str_line= line.rstrip().replace(" ","") + while line: + line = check_file.readline() + str_line+=line.rstrip().replace(" ","") + check_file.close() + val_str= "0x" + str(str_line[4])+str(str_line[5]) + val_int=int(val_str, 16)*1000 + check_file.close() + set_drv_cmd = "echo "+str(val_int) + " > " + self.BASE_I2C_PATH + "0-0048/temp1_input" + log_os_system(set_drv_cmd,0) + val_str= "0x" + str(str_line[10])+str(str_line[11]) + val_int=int(val_str, 16) * 1000 + set_drv_cmd = "echo "+str(val_int) + " > " + self.BASE_I2C_PATH + "0-0049/temp1_input" + log_os_system(set_drv_cmd,0) + val_str= "0x" + str(str_line[16])+str(str_line[17]) + val_int=int(val_str, 16) * 1000 + set_drv_cmd = "echo "+str(val_int) + " > " + self.BASE_I2C_PATH + "0-004a/temp1_input" + log_os_system(set_drv_cmd, 0) + + return True + + def manage_ipmi_fan(self): + logging.debug ("drv hanlder-manage_ipmi_fan") + #Handle fan case + #ipmitool raw 0x34 0x14 + ipmi_cmd = self.IPMI_CMD_FAN + " > " +self.FAN_FILE + log_os_system(ipmi_cmd, 0) + file_path = self.FAN_FILE + #print(file_path) + check_file = open(file_path) + try: + check_file = open(file_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + line = check_file.readline() + str_line= line.rstrip().replace(" ","") + while line: + line = check_file.readline() + str_line+=line.rstrip().replace(" ","") + check_file.close() + #print (str_line) + k=0 + for i in range(self.FAN_ID_START, self.FAN_ID_END+1, 1): + #print "k=%d"%k + if str_line[k+1]=='0': + set_drv_cmd = "echo 1 > " + self.FAN_PATH + str(i) + "_present" + else: + set_drv_cmd = "echo 0 > " + self.FAN_PATH + str(i) + "_present" + log_os_system(set_drv_cmd, 0) + + val_str= "0x" + str(str_line[k+6])+str(str_line[k+7]) + str(str_line[k+4])+str(str_line[k+5]) + val_int=int(val_str, 16) + set_drv_cmd = "echo " + str(val_int) + " > " + self.FAN_PATH + str(i) + "_front_speed_rpm" + log_os_system(set_drv_cmd, 0) + val_str= "0x" + str(str_line[k+54])+str(str_line[k+55]) + str(str_line[k+52])+str(str_line[k+53]) + val_int=int(val_str, 16) + set_drv_cmd = "echo " + str(val_int) + " > " + self.FAN_PATH + str(i) + "_rear_speed_rpm" + log_os_system(set_drv_cmd, 0) + k+=8; + return True + + + def manage_ipmi_psu(self): + logging.debug ("drv hanlder-manage_ipmi_psu") + #Handle psu case + #present: ipmitool raw 0x34 0x16 '0x1' . Param-1 is psu id(id_1:0x1, id_2:0x2) + + #cpld access psu + for i in range(self.PSU_ID_START, self.PSU_ID_END+1, 1): + #present case + ipmi_cmd = self.IPMI_CMD_PSU + str(i) + " > " +self.PSU_FILE + str(i) + log_os_system(ipmi_cmd, 0) + if i==1: + psu_sysfs_path = self.PSU1_PATH + else: + psu_sysfs_path = self.PSU2_PATH + file_path = self.PSU_FILE + str(i) + #print(file_path) + check_file = open(file_path) + try: + check_file = open(file_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + line = check_file.readline() + str_line= line.rstrip().replace(" ","") + while line: + line = check_file.readline() + str_line+=line.rstrip().replace(" ","") + check_file.close() + #print (line) + if str_line[1]=='0': + int_val=1 #psu insert + #print "psu_%d present"%i + set_drv_cmd = "echo " +str(int_val) + " > " + psu_sysfs_path + "psu_present" + log_os_system(set_drv_cmd, 0) + set_drv_cmd = "echo " + str(str_line[5]) + " > " + psu_sysfs_path + "psu_power_good" + log_os_system(set_drv_cmd, 0) + else: + int_val=0 + set_drv_cmd = "echo " +str(int_val) + " > " + psu_sysfs_path + "psu_present" + log_os_system(set_drv_cmd, 0) + set_drv_cmd = "echo " + str(int_val) + " > " + psu_sysfs_path + "psu_power_good" + log_os_system(set_drv_cmd, 0) + + #pmbus + if i==1: + psu_sysfs_path = self.PSU1_PMBUS_PATH + else: + psu_sysfs_path = self.PSU2_PMBUS_PATH + + if str_line[5]=='1': #power_on + val_str= "0x" + str(str_line[28])+str(str_line[29]) + str(str_line[26])+str(str_line[27]) + val_int=int(val_str, 16) * 1000 + set_drv_cmd = "echo " + str(val_int) + " > " + psu_sysfs_path + "psu_temp1_input" + log_os_system(set_drv_cmd, 0) + #print "val_int=%d"%val_int + val_str= "0x" + str(str_line[32])+str(str_line[33]) + str(str_line[30])+str(str_line[31]) + val_int=int(val_str, 16) + #print "fan:val_int=%d"%val_int + set_drv_cmd = "echo " + str(val_int) + " > " + psu_sysfs_path + "psu_fan1_speed_rpm" + log_os_system(set_drv_cmd, 0) + val_str= "0x" + str(str_line[36])+str(str_line[37]) + str(str_line[34])+str(str_line[35]) + val_int=int(val_str, 16) + #print "pout val_int=%d"%val_int + set_drv_cmd = "echo " + str(val_int) + " > " + psu_sysfs_path + "psu_p_out" + log_os_system(set_drv_cmd, 0) + else: #power_off + val_int=0 + set_drv_cmd = "echo " + str(val_int) + " > " + psu_sysfs_path + "psu_temp1_input" + log_os_system(set_drv_cmd, 0) + set_drv_cmd = "echo " + str(val_int) + " > " + psu_sysfs_path + "psu_fan1_speed_rpm" + log_os_system(set_drv_cmd, 0) + set_drv_cmd = "echo " + str(val_int) + " > " + psu_sysfs_path + "psu_p_out" + log_os_system(set_drv_cmd, 0) + + time.sleep(2) + return True + + def manage_ipmi_sys(self): + logging.debug ("drv hanlder-manage_ipmi_sys") + #Handle sys case + #ipmitool -raw 0x34 0x18 0x00 0x80 + #ipmitool -raw 0x34 0x18 0x80 0x80 + + ipmi_cmd = self.IPMI_CMD_SYS_EEPROM_1 + " > " + self.SYS_EEPROM_FILE_1 + log_os_system(ipmi_cmd, 0) + ipmi_cmd = self.IPMI_CMD_SYS_EEPROM_2 + " > " + self.SYS_EEPROM_FILE_2 + log_os_system(ipmi_cmd, 0) + + #Read SYS EEPROM + file_path = self.SYS_EEPROM_FILE_1 + check_file = open(file_path) + try: + check_file = open(file_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + line = check_file.readline() + str_line= line.rstrip().replace(" ","") + while line: + line = check_file.readline() + str_line+=line.rstrip().replace(" ","") + check_file.close() + + file_path = self.SYS_EEPROM_FILE_2 + check_file = open(file_path) + try: + check_file = open(file_path) + except IOError as e: + print "Error: unable to open file: %s" % str(e) + line = check_file.readline() + str_line+= line.rstrip().replace(" ","") + while line: + line = check_file.readline() + str_line+=line.rstrip().replace(" ","") + check_file.close() + #print(len(str_line)) + #print(str_line) + set_drv_cmd = "echo " + str_line+ " > " + self.SYS_EEPROM_PATH + #print(set_drv_cmd) + log_os_system(set_drv_cmd, 0) + + return True + +def main(argv): + log_file = '%s.log' % FUNCTION_NAME + log_level = logging.WARNING + if len(sys.argv) != 1: + try: + opts, args = getopt.getopt(argv,'hdl:',['lfile=']) + except getopt.GetoptError: + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + for opt, arg in opts: + if opt == '-h': + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + elif opt in ('-d', '--debug'): + log_level = logging.DEBUG + elif opt in ('-l', '--lfile'): + log_file = arg + + set_drv_cmd = "echo 100 > /sys/module/ipmi_si/parameters/kipmid_max_busy_us" + log_os_system(set_drv_cmd, 0) + monitor = accton_as7716xb_drv_handler(log_file, log_level) + + set_sys_eeprom=0 + thermal_chk_time=0 + psu_chk_time=0 + # Loop forever, doing something useful hopefully: + while True: + logging.debug ("monitor.manage_ipmi") + if set_sys_eeprom==0: + monitor.manage_ipmi_sys() + set_sys_eeprom=1 + monitor.manage_ipmi_qsfp() + time.sleep(0.1) + monitor.manage_ipmi_thermal() + monitor.manage_ipmi_psu() + time.sleep(0.1) + monitor.manage_ipmi_fan() + time.sleep(0.05) + +if __name__ == '__main__': + main(sys.argv[1:]) diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_monitor.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_monitor.py new file mode 100755 index 000000000000..2568312b0955 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_monitor.py @@ -0,0 +1,227 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Accton Technology Corporation +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# ------------------------------------------------------------------ +# HISTORY: +# mm/dd/yyyy (A.D.) +# 11/13/2017: Polly Hsu, Create +# 1/10/2018: Jostar modify for as7716_32 +# ------------------------------------------------------------------ + +try: + import os + import sys, getopt + import subprocess + import click + import imp + import logging + import logging.config + import types + import time # this is only being used as part of the example + import traceback + from tabulate import tabulate + from as7716_32x.fanutil import FanUtil + from as7716_32x.thermalutil import ThermalUtil +except ImportError as e: + raise ImportError('%s - required module not found' % str(e)) + +# Deafults +VERSION = '1.0' +FUNCTION_NAME = 'accton_as7716_monitor' + +global log_file +global log_level + + # For AC power Front to Back : + # If any fan fail, please fan speed register to 15 + # The max value of Fan speed register is 9 + # [LM75(48) + LM75(49) + LM75(4A)] > 174 => set Fan speed value from 4 to 5 + # [LM75(48) + LM75(49) + LM75(4A)] > 182 => set Fan speed value from 5 to 7 + # [LM75(48) + LM75(49) + LM75(4A)] > 190 => set Fan speed value from 7 to 9 + # + # [LM75(48) + LM75(49) + LM75(4A)] < 170 => set Fan speed value from 5 to 4 + # [LM75(48) + LM75(49) + LM75(4A)] < 178 => set Fan speed value from 7 to 5 + # [LM75(48) + LM75(49) + LM75(4A)] < 186 => set Fan speed value from 9 to 7 + # + # + # For AC power Back to Front : + # If any fan fail, please fan speed register to 15 + # The max value of Fan speed register is 10 + # [LM75(48) + LM75(49) + LM75(4A)] > 140 => set Fan speed value from 4 to 5 + # [LM75(48) + LM75(49) + LM75(4A)] > 150 => set Fan speed value from 5 to 7 + # [LM75(48) + LM75(49) + LM75(4A)] > 160 => set Fan speed value from 7 to 10 + # + # [LM75(48) + LM75(49) + LM75(4A)] < 135 => set Fan speed value from 5 to 4 + # [LM75(48) + LM75(49) + LM75(4A)] < 145 => set Fan speed value from 7 to 5 + # [LM75(48) + LM75(49) + LM75(4A)] < 155 => set Fan speed value from 10 to 7 + # + + + # 2.If no matched fan speed is found from the policy, + # use FAN_DUTY_CYCLE_MIN as default speed + # Get current temperature + # 4.Decision 3: Decide new fan speed depend on fan direction/current fan speed/temperature + + + + +# Make a class we can use to capture stdout and sterr in the log +class accton_as7716_monitor(object): + # static temp var + _ori_temp = 0 + _new_perc = 0 + _ori_perc = 0 + + def __init__(self, log_file, log_level): + """Needs a logger and a logger level.""" + # set up logging to file + logging.basicConfig( + filename=log_file, + filemode='w', + level=log_level, + format= '[%(asctime)s] {%(pathname)s:%(lineno)d} %(levelname)s - %(message)s', + datefmt='%H:%M:%S' + ) + + # set up logging to console + if log_level == logging.DEBUG: + console = logging.StreamHandler() + console.setLevel(log_level) + formatter = logging.Formatter('%(name)-12s: %(levelname)-8s %(message)s') + console.setFormatter(formatter) + logging.getLogger('').addHandler(console) + + logging.debug('SET. logfile:%s / loglevel:%d', log_file, log_level) + + def manage_fans(self): + + fan_policy_f2b = { + 0: [32, 0, 174000], + 1: [38, 170000, 182000], + 2: [50, 178000, 190000], + 3: [63, 186000, 0], + } + fan_policy_b2f = { + 0: [32, 0, 140000], + 1: [38, 135000, 150000], + 2: [50, 145000, 160000], + 3: [69, 15500, 0], + } + + thermal = ThermalUtil() + fan = FanUtil() + get_temp = thermal.get_thermal_temp() + # 1. Get each fan status, one not presented, set speed to full + # Get fan direction (Only get the first one since all fan direction are the same) + # Get current fan duty cycle + cur_duty_cycle = fan.get_fan_duty_cycle() + #print "cur_duty_cycle=%d" %cur_duty_cycle + #print "get_temp=%d" %get_temp + + for x in range(fan.get_idx_fan_start(), fan.get_num_fans()+1): + fan_status = fan.get_fan_status(x) + if fan_status is None: + #print "fan_status is None" + logging.debug('INFO. SET new_perc to %d (FAN stauts is None. fan_num:%d)', 100, x) + return False + if fan_status is False: + #self._new_perc = FAN_LEV1_SPEED_PERC + #print "fan_%d status=false, set 45 duty_cycle" %x + logging.debug('INFO. SET new_perc to %d (FAN fault. fan_num:%d)', 100, x) + fan.set_fan_duty_cycle(45) + return True + logging.debug('INFO. fan_status is True (fan_num:%d)', x) + + if fan_status is not None and fan_status is not False: + fan_dir=fan.get_fan_dir(1) + for x in range(0, 4): + if cur_duty_cycle == fan_policy_f2b[x][0]: + break + #print "x=%d" %x + #print "fan_dir=%d" %fan_dir + #print "fan_policy_f2b[x][0]=%d" %fan_policy_f2b[x][0] + #print "cur_duty_cycle=%d" %cur_duty_cycle + + if fan_dir == 1: + if x == 4 : + fan.set_fan_duty_cycle(fan_policy_f2b[0][0]) + new_duty_cycle=cur_duty_cycle + # if temp > up_levle, else if temp < down_level + if get_temp > fan_policy_f2b[x][2] and x != 3 : + new_duty_cycle= fan_policy_f2b[x+1][0] + #print "new_duty_cycle= fan_policy_f2b[x+1][0]=%d" %new_duty_cycle + #print "Becasue get_temp > fan_policy_f2b[x][2]=%d" %fan_policy_f2b[x][2] + logging.debug('INFO. THERMAL temp UP, temp %d > %d , new_duty_cycle=%d', get_temp, fan_policy_f2b[x][2], new_duty_cycle) + #else get_temp < fan_policy_f2b[x][1] and x != 0 : + elif get_temp < fan_policy_f2b[x][1] : + new_duty_cycle= fan_policy_f2b[x-1][0] + #print "new_duty_cycle= fan_policy_f2b[x-1][0]=%d" %new_duty_cycle + #print "Becasue get_temp < fan_policy_f2b[x][1]=%d" %fan_policy_f2b[x][1] + logging.debug('INFO. THERMAL temp down, temp %d < %d , new_duty_cycle=%d', get_temp, fan_policy_f2b[x][1], new_duty_cycle) + if new_duty_cycle == cur_duty_cycle : + #print "new_duty_cycle == cur_duty_cycle case, so return True" + return True + else: + if x == 4 : + fan.set_fan_duty_cycle(fan_policy_b2f[0][0]) + new_duty_cycle=cur_duty_cycle + # if temp > up_levle, else if temp < down_level + if get_temp > fan_policy_b2f[x][1] and x != 3 : + new_duty_cycle= fan_policy_b2f[x+1][0] + logging.debug('INFO. THERMAL temp UP, temp %d > %d , new_duty_cycle=%d', get_temp, fan_policy_b2f[x][2], new_duty_cycle) + elif get_temp < fan_policy_b2f[x][0] and x != 0 : + #elif get_temp < fan_policy_b2f[x][0] + new_duty_cycle= fan_policy_b2f[x-1][0] + logging.debug('INFO. THERMAL temp down, temp %d < %d , new_duty_cycle=%d', get_temp, fan_policy_b2f[x][1], new_duty_cycle) + if new_duty_cycle == cur_duty_cycle : + return True + + fan.set_fan_duty_cycle(new_duty_cycle) + #print "set new_duty_cycle=%d" %new_duty_cycle + #print "old_duty_cycle=%d" %cur_duty_cycle + + return True + + + +def main(argv): + log_file = '%s.log' % FUNCTION_NAME + log_level = logging.INFO + if len(sys.argv) != 1: + try: + opts, args = getopt.getopt(argv,'hdl:',['lfile=']) + except getopt.GetoptError: + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + for opt, arg in opts: + if opt == '-h': + print 'Usage: %s [-d] [-l ]' % sys.argv[0] + return 0 + elif opt in ('-d', '--debug'): + log_level = logging.DEBUG + elif opt in ('-l', '--lfile'): + log_file = arg + + monitor = accton_as7716_monitor(log_file, log_level) + + # Loop forever, doing something useful hopefully: + while True: + monitor.manage_fans() + time.sleep(1) + +if __name__ == '__main__': + main(sys.argv[1:]) diff --git a/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_util.py b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_util.py new file mode 100755 index 000000000000..ffddfb338506 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7716-32xb/utils/accton_as7716_32xb_util.py @@ -0,0 +1,616 @@ +#!/usr/bin/env python +# +# Copyright (C) 2016 Accton Networks, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes + show : show all systen status + sff : dump SFP eeprom + set : change board setting with fan|led|sfp +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + +PROJECT_NAME = 'as7716_32xb' +version = '0.0.1' +verbose = False +DEBUG = False +args = [] +ALL_DEVICE = {} +DEVICE_NO = {'led':5, 'fan1':1, 'fan2':1,'fan3':1,'fan4':1,'fan5':1,'thermal':3, 'psu':2, 'sfp':54} + + +led_prefix ='/sys/devices/platform/as7716_32xb_led/leds/accton_'+PROJECT_NAME+'_led::' +fan_prefix ='/sys/devices/platform/as7716_32xb_' +hwmon_types = {'led': ['diag','fan','loc','psu1','psu2'], + 'fan1': ['fan'], + 'fan2': ['fan'], + 'fan3': ['fan'], + 'fan4': ['fan'], + 'fan5': ['fan'], + 'fan5': ['fan'], + } +hwmon_nodes = {'led': ['brightness'] , + 'fan1': ['fan_duty_cycle_percentage', 'fan1_fault', 'fan1_speed_rpm', 'fan1_direction', 'fanr1_fault', 'fanr1_speed_rpm'], + 'fan2': ['fan_duty_cycle_percentage','fan2_fault', 'fan2_speed_rpm', 'fan2_direction', 'fanr2_fault', 'fanr2_speed_rpm'], + 'fan3': ['fan_duty_cycle_percentage','fan3_fault', 'fan3_speed_rpm', 'fan3_direction', 'fanr3_fault', 'fanr3_speed_rpm'], + 'fan4': ['fan4_duty_cycle_percentage','fan4_fault', 'fan4_speed_rpm', 'fan4_direction', 'fanr4_fault', 'fanr4_speed_rpm'], + 'fan5': ['fan_duty_cycle_percentage','fan5_fault', 'fan5_speed_rpm', 'fan5_direction', 'fanr5_fault', 'fanr5_speed_rpm'], + } +hwmon_prefix ={'led': led_prefix, + 'fan1': fan_prefix, + 'fan2': fan_prefix, + 'fan3': fan_prefix, + 'fan4': fan_prefix, + 'fan5': fan_prefix, + } + +i2c_prefix = '/sys/bus/i2c/devices/' +i2c_drv_prefix = '/sys/bus/i2c/devices/' +i2c_bus = {'thermal': ['10-0048','10-0049', '10-004a'] , + 'psu': ['17-0050','18-0053'], + 'sfp': ['-0050']} +i2c_nodes = { + 'thermal': ['hwmon/hwmon*/temp1_input'] , + 'psu': ['psu_present ', 'psu_power_good'] , + 'sfp': ['sfp_is_present ', 'sfp_tx_disable']} + +sfp_map = [1, 2, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 14, 15, 16, + 17, 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, 31, 32] + +mknod =[ +'echo as7716_32xb_cpld1 0x60 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo accton_i2c_cpld 0x62 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo accton_i2c_cpld 0x64 > /sys/bus/i2c/devices/i2c-0/new_device', + +] + +mknod_xb =[ +'echo as7716_32xb_cpld1 0x60 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo accton_i2c_cpld 0x62 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo accton_i2c_cpld 0x64 > /sys/bus/i2c/devices/i2c-0/new_device', +#Thermal +'echo as7716_32xb_thermal 0x48 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo as7716_32xb_thermal 0x49 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo as7716_32xb_thermal 0x4a > /sys/bus/i2c/devices/i2c-0/new_device', +#Fan +'echo as7716_32xb_fan 0x66 > /sys/bus/i2c/devices/i2c-0/new_device', +# PSU-1 +'echo as7716_32xb_psu1 0x53 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo as7716_32xb_psu2 0x50> /sys/bus/i2c/devices/i2c-0/new_device', +# PSU-2 +'echo as7716_32xb_pmbus 0x5b > /sys/bus/i2c/devices/i2c-0/new_device', +'echo as7716_32xb_pmbus 0x58 > /sys/bus/i2c/devices/i2c-0/new_device', +#EERPOM +'echo as7716_32xb_sys 0x56 > /sys/bus/i2c/devices/i2c-0/new_device', +] + + + +mknod2 =[ +'echo as7716_32xb_cpld1 0x60 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo accton_i2c_cpld 0x61 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo accton_i2c_cpld 0x62 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-0/new_device', + +# PSU-1 +'echo as7716_32xb_psu1 0x38 > /sys/bus/i2c/devices/i2c-57/new_device', +'echo cpr_4011_4mxx 0x3c > /sys/bus/i2c/devices/i2c-57/new_device', +'echo as7716_32xb_psu1 0x50 > /sys/bus/i2c/devices/i2c-57/new_device', +'echo ym2401 0x58 > /sys/bus/i2c/devices/i2c-57/new_device', + +# PSU-2 +'echo as7716_32xb_psu2 0x3b > /sys/bus/i2c/devices/i2c-58/new_device', +'echo cpr_4011_4mxx 0x3f > /sys/bus/i2c/devices/i2c-58/new_device', +'echo as7716_32xb_psu2 0x53 > /sys/bus/i2c/devices/i2c-58/new_device', +'echo ym2401 0x5b > /sys/bus/i2c/devices/i2c-58/new_device', + +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-61/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-62/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-63/new_device', + +#EERPOM +#'echo 24c02 0x57 > /sys/bus/i2c/devices/i2c-1/new_device', +] + +FORCE = 0 +logging.basicConfig(filename= PROJECT_NAME+'.log', filemode='w',level=logging.DEBUG) +logging.basicConfig(level=logging.INFO) + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + do_install() + elif arg == 'clean': + do_uninstall() + elif arg == 'show': + device_traversal() + elif arg == 'sff': + if len(args)!=2: + show_eeprom_help() + elif int(args[1]) ==0 or int(args[1]) > DEVICE_NO['sfp']: + show_eeprom_help() + else: + show_eeprom(args[1]) + return + elif arg == 'set': + if len(args)<3: + show_set_help() + else: + set_device(args[1:]) + return + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_set_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print cmd +" [led|sfp|fan]" + print " use \""+ cmd + " led 0-4 \" to set led color" + print " use \""+ cmd + " fan 0-100\" to set fan duty percetage" + print " use \""+ cmd + " sfp 1-32 {0|1}\" to set sfp# tx_disable" + sys.exit(0) + +def show_eeprom_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print " use \""+ cmd + " 1-32 \" to dump sfp# eeprom" + sys.exit(0) + +def my_log(txt): + if DEBUG == True: + print "[ACCTON DBG]: "+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status = 1 + output = "" + status, output = commands.getstatusoutput(cmd) + my_log (cmd +"with result:" + str(status)) + my_log ("cmd:" + cmd) + my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +def driver_inserted(): + ret, lsmod = log_os_system("lsmod| grep accton", 0) + logging.info('mods:'+lsmod) + if len(lsmod) ==0: + return False + + +kos = [ +'depmod -ae', +'modprobe ipmi_msghandler', +'modprobe ipmi_si', +'modprobe ipmi_devintf', +'modprobe i2c_dev', +'modprobe accton_i2c_cpld', +'modprobe accton_as7716_32xb_cpld1', +'modprobe accton_as7716_32xb_fan', +'modprobe accton_as7716_32xb_leds', +'modprobe accton_as7716_32xb_psu', +'modprobe accton_as7716_32xb_oom', +'modprobe accton_as7716_32xb_thermal', +'modprobe accton_as7716_32xb_pmbus', +'modprobe accton_as7716_32xb_sys'] + +def driver_install(): + global FORCE + for i in range(0,len(kos)): + status, output = log_os_system(kos[i], 1) + if status: + if FORCE == 0: + return status + return 0 + +def driver_uninstall(): + global FORCE + for i in range(0,len(kos)): + rm = kos[-(i+1)].replace("modprobe", "modprobe -rq") + rm = rm.replace("insmod", "rmmod") + status, output = log_os_system(rm, 1) + if status: + if FORCE == 0: + return status + return 0 + + + +def i2c_order_check(): + # i2c bus 0 and 1 might be installed in different order. + # Here check if 0x76 is exist @ i2c-0 + tmp = "echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-1/new_device" + status, output = log_os_system(tmp, 0) + if not device_exist(): + order = 1 + else: + order = 0 + tmp = "echo 0x70 > /sys/bus/i2c/devices/i2c-1/delete_device" + status, output = log_os_system(tmp, 0) + return order + +def device_install(): + global FORCE + + #order = i2c_order_check() + # if 0x76 is not exist @i2c-0, use reversed bus order + #if order: + # for i in range(0,len(mknod2)): + # #for pca932x need times to built new i2c buses + # if mknod2[i].find('pca954') != -1: + # time.sleep(2) + + # status, output = log_os_system(mknod2[i], 1) + # if status: + # print output + # if FORCE == 0: + # return status + #else: + print "Prepar to create instance.............." + for i in range(0,len(mknod_xb)): + print "Beginn to create instance.............." + status, output = log_os_system(mknod_xb[i], 1) + print "status=%s" %status + print "output=%s" %output + if status: + print output + if FORCE == 0: + return status + #time.sleep (50.0 / 1000.0) + print "Create sfp instance.............." + for i in range(0,len(sfp_map)): + status, output =log_os_system("echo as7716_32xb_oom 0x"+str(sfp_map[i])+ " > /sys/bus/i2c/devices/i2c-0/new_device", 1) + if status: + print output + if FORCE == 0: + return status + #status, output =log_os_system("echo port"+str(i)+" > /sys/bus/i2c/devices/0-000"+str(sfp_map[i])+"/port_name", 1) + #if status: + # print output + # if FORCE == 0: + # return status + return + +def device_uninstall(): + global FORCE + + for i in range(0,len(sfp_map)): + target = "echo 0x"+str(sfp_map[i])+ " > /sys/bus/i2c/devices/i2c-0/delete_device" + print(target) + status, output =log_os_system(target, 1) + if status: + print output + if FORCE == 0: + return status + + nodelist = mknod_xb + + for i in range(len(nodelist)): + target = nodelist[-(i+1)] + temp = target.split() + del temp[1] + temp[-1] = temp[-1].replace('new_device', 'delete_device') + status, output = log_os_system(" ".join(temp), 1) + if status: + print output + if FORCE == 0: + return status + + return + +def system_ready(): + if driver_inserted() == False: + print "driver_inserted() == False" + return False + if not device_exist(): + print "not device_exist()" + return False + return True + +def do_install(): + print "Checking system...." + if driver_inserted() == False: + print "No driver, installing.1..." + status = driver_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" drivers detected...." + if not device_exist(): + print "No device, installing..2.." + status = device_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" devices detected...." + return + +def do_uninstall(): + print "Checking systemm...." + if not device_exist(): + print PROJECT_NAME.upper() +" has no device installed...." + else: + print "Removing device...." + status = device_uninstall() + if status: + if FORCE == 0: + return status + + if driver_inserted()== False : + print PROJECT_NAME.upper() +" has no driver installed...." + else: + print "Removing installed driver...." + status = driver_uninstall() + if status: + if FORCE == 0: + return status + + return + +def devices_info(): + global DEVICE_NO + global ALL_DEVICE + global i2c_bus, hwmon_types + for key in DEVICE_NO: + ALL_DEVICE[key]= {} + for i in range(0,DEVICE_NO[key]): + ALL_DEVICE[key][key+str(i+1)] = [] + + for key in i2c_bus: + buses = i2c_bus[key] + nodes = i2c_nodes[key] + for i in range(0,len(buses)): + for j in range(0,len(nodes)): + if 'fan' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ buses[i]+"/fan"+str(k+1)+"_"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + elif 'sfp' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ str(sfp_map[k])+ buses[i]+"/"+ nodes[j] + print "path= %s" %path + print "i=%d" %i + print "k=%d" %k + print "j= %d" %j + print "sfp_map[k]=%s" %sfp_map[k] + print " buses[i]=%s" %buses[i] + print "nodes[j]=%s" %nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + else: + node = key+str(i+1) + path = i2c_prefix+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + + for key in hwmon_types: + itypes = hwmon_types[key] + nodes = hwmon_nodes[key] + for i in range(0,len(itypes)): + for j in range(0,len(nodes)): + node = key+"_"+itypes[i] + path = hwmon_prefix[key]+ itypes[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][ key+str(i+1)].append(path) + + #show dict all in the order + if DEBUG == True: + for i in sorted(ALL_DEVICE.keys()): + print(i+": ") + for j in sorted(ALL_DEVICE[i].keys()): + print(" "+j) + for k in (ALL_DEVICE[i][j]): + print(" "+" "+k) + return + +def show_eeprom(index): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + node = ALL_DEVICE['sfp'] ['sfp'+str(index)][0] + node = node.replace(node.split("/")[-1], 'sfp_eeprom') + # check if got hexdump command in current environment + ret, log = log_os_system("which hexdump", 0) + ret, log2 = log_os_system("which busybox hexdump", 0) + if len(log): + hex_cmd = 'hexdump' + elif len(log2): + hex_cmd = ' busybox hexdump' + else: + log = 'Failed : no hexdump cmd!!' + logging.info(log) + print log + return 1 + + print node + ":" + ret, log = log_os_system("cat "+node+"| "+hex_cmd+" -C", 1) + if ret==0: + print log + else: + print "**********device no found**********" + return + +def set_device(args): + global DEVICE_NO + global ALL_DEVICE + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + + if args[0]=='led': + if int(args[1])>4: + show_set_help() + return + #print ALL_DEVICE['led'] + for i in range(0,len(ALL_DEVICE['led'])): + for k in (ALL_DEVICE['led']['led'+str(i+1)]): + ret, log = log_os_system("echo "+args[1]+" >"+k, 1) + if ret: + return ret + elif args[0]=='fan': + if int(args[1])>100: + show_set_help() + return + #print ALL_DEVICE['fan'] + #fan1~6 is all fine, all fan share same setting + node = ALL_DEVICE['fan1'] ['fan11'][0] + node = node.replace(node.split("/")[-1], 'fan1_duty_cycle_percentage') + ret, log = log_os_system("cat "+ node, 1) + if ret==0: + print ("Previous fan duty: " + log.strip() +"%") + ret, log = log_os_system("echo "+args[1]+" >"+node, 1) + if ret==0: + print ("Current fan duty: " + args[1] +"%") + return ret + elif args[0]=='sfp': + if int(args[1])> DEVICE_NO[args[0]] or int(args[1])==0: + show_set_help() + return + if len(args)<2: + show_set_help() + return + + if int(args[2])>1: + show_set_help() + return + + #print ALL_DEVICE[args[0]] + for i in range(0,len(ALL_DEVICE[args[0]])): + for j in ALL_DEVICE[args[0]][args[0]+str(args[1])]: + if j.find('tx_disable')!= -1: + ret, log = log_os_system("echo "+args[2]+" >"+ j, 1) + if ret: + return ret + + return + +#get digits inside a string. +#Ex: 31 for "sfp31" +def get_value(input): + digit = re.findall('\d+', input) + return int(digit[0]) + +def device_traversal(): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + for i in sorted(ALL_DEVICE.keys()): + print("============================================") + print(i.upper()+": ") + print("============================================") + + for j in sorted(ALL_DEVICE[i].keys(), key=get_value): + print " "+j+":", + for k in (ALL_DEVICE[i][j]): + ret, log = log_os_system("cat "+k, 0) + func = k.split("/")[-1].strip() + func = re.sub(j+'_','',func,1) + func = re.sub(i.lower()+'_','',func,1) + if ret==0: + print func+"="+log+" ", + else: + print func+"="+"X"+" ", + print + print("----------------------------------------------------------------") + + + print + return + +def device_exist(): + ret1, log = log_os_system("ls "+i2c_prefix+"*0060", 0) + ret2, log = log_os_system("ls "+i2c_prefix+"i2c-0", 0) + print(ret1) + print(ret2) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/classes/__init__.py b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/classes/__init__.py new file mode 100755 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/classes/fanutil.py b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/classes/fanutil.py new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/classes/thermalutil.py b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/classes/thermalutil.py new file mode 100644 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/Makefile b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/Makefile new file mode 100644 index 000000000000..1b3477b0b771 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/Makefile @@ -0,0 +1,2 @@ +obj-m:=x86-64-accton-as7816-64x-fan.o x86-64-accton-as7816-64x-sfp.o x86-64-accton-as7816-64x-leds.o \ + x86-64-accton-as7816-64x-psu.o accton_i2c_cpld.o ym2651y.o diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/accton_i2c_cpld.c b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/accton_i2c_cpld.c new file mode 120000 index 000000000000..39c0826d16fd --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/accton_i2c_cpld.c @@ -0,0 +1 @@ +../../common/modules/accton_i2c_cpld.c \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-fan.c b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-fan.c new file mode 100644 index 000000000000..3de2c200e1e1 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-fan.c @@ -0,0 +1,466 @@ +/* + * A hwmon driver for the Accton as7816-64x fan + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "as7816_64x_fan" + +static struct as7816_64x_fan_data *as7816_64x_fan_update_device(struct device *dev); +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); + +/* fan related data, the index should match sysfs_fan_attributes + */ +static const u8 fan_reg[] = { + 0x80, /* fan 1-4 present status */ + 0x81, /* fan 1-4 direction(0:F2B 1:B2F) */ + 0x87, /* fan PWM(for all fan) */ + 0x90, /* front fan 1 speed(rpm) */ + 0x91, /* front fan 2 speed(rpm) */ + 0x92, /* front fan 3 speed(rpm) */ + 0x93, /* front fan 4 speed(rpm) */ + 0x98, /* rear fan 1 speed(rpm) */ + 0x99, /* rear fan 2 speed(rpm) */ + 0x9A, /* rear fan 3 speed(rpm) */ + 0x9B, /* rear fan 4 speed(rpm) */ +}; + +/* Each client has this additional data */ +struct as7816_64x_fan_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[ARRAY_SIZE(fan_reg)]; /* Register value */ +}; + +enum fan_id { + FAN1_ID, + FAN2_ID, + FAN3_ID, + FAN4_ID +}; + +enum sysfs_fan_attributes { + FAN_PRESENT_REG, + FAN_DIRECTION_REG, + FAN_DUTY_CYCLE_PERCENTAGE, /* Only one CPLD register to control duty cycle for all fans */ + FAN1_FRONT_SPEED_RPM, + FAN2_FRONT_SPEED_RPM, + FAN3_FRONT_SPEED_RPM, + FAN4_FRONT_SPEED_RPM, + FAN1_REAR_SPEED_RPM, + FAN2_REAR_SPEED_RPM, + FAN3_REAR_SPEED_RPM, + FAN4_REAR_SPEED_RPM, + FAN1_DIRECTION, + FAN2_DIRECTION, + FAN3_DIRECTION, + FAN4_DIRECTION, + FAN1_PRESENT, + FAN2_PRESENT, + FAN3_PRESENT, + FAN4_PRESENT, + FAN1_FAULT, + FAN2_FAULT, + FAN3_FAULT, + FAN4_FAULT +}; + +/* Define attributes + */ +#define DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT);\ + static SENSOR_DEVICE_ATTR(fan##index2##_fault, S_IRUGO, fan_show_value, NULL, FAN##index##_FAULT) +#define DECLARE_FAN_FAULT_ATTR(index, index2) &sensor_dev_attr_fan##index##_fault.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_fault.dev_attr.attr + +#define DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_direction, S_IRUGO, fan_show_value, NULL, FAN##index##_DIRECTION) +#define DECLARE_FAN_DIRECTION_ATTR(index) &sensor_dev_attr_fan##index##_direction.dev_attr.attr + +#define DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan_duty_cycle_percentage, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE);\ + static SENSOR_DEVICE_ATTR(pwm##index, S_IWUSR | S_IRUGO, fan_show_value, set_duty_cycle, FAN_DUTY_CYCLE_PERCENTAGE) + +#define DECLARE_FAN_DUTY_CYCLE_ATTR(index) &sensor_dev_attr_fan_duty_cycle_percentage.dev_attr.attr, \ + &sensor_dev_attr_pwm##index.dev_attr.attr + + +#define DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(index) \ + static SENSOR_DEVICE_ATTR(fan##index##_present, S_IRUGO, fan_show_value, NULL, FAN##index##_PRESENT) +#define DECLARE_FAN_PRESENT_ATTR(index) &sensor_dev_attr_fan##index##_present.dev_attr.attr + +#define DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(index, index2) \ + static SENSOR_DEVICE_ATTR(fan##index##_front_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_rear_speed_rpm, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_FRONT_SPEED_RPM);\ + static SENSOR_DEVICE_ATTR(fan##index2##_input, S_IRUGO, fan_show_value, NULL, FAN##index##_REAR_SPEED_RPM) +#define DECLARE_FAN_SPEED_RPM_ATTR(index, index2) &sensor_dev_attr_fan##index##_front_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_rear_speed_rpm.dev_attr.attr, \ + &sensor_dev_attr_fan##index##_input.dev_attr.attr, \ + &sensor_dev_attr_fan##index2##_input.dev_attr.attr + +/* 6 fan fault attributes in this platform */ +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_FAULT_SENSOR_DEV_ATTR(4,14); +/* 6 fan speed(rpm) attributes in this platform */ +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(1,11); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(2,12); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(3,13); +DECLARE_FAN_SPEED_RPM_SENSOR_DEV_ATTR(4,14); +/* 6 fan present attributes in this platform */ +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(1); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(2); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(3); +DECLARE_FAN_PRESENT_SENSOR_DEV_ATTR(4); +/* 6 fan direction attribute in this platform */ +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(1); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(2); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(3); +DECLARE_FAN_DIRECTION_SENSOR_DEV_ATTR(4); +/* 1 fan duty cycle attribute in this platform */ +DECLARE_FAN_DUTY_CYCLE_SENSOR_DEV_ATTR(1); + +static struct attribute *as7816_64x_fan_attributes[] = { + /* fan related attributes */ + DECLARE_FAN_FAULT_ATTR(1,11), + DECLARE_FAN_FAULT_ATTR(2,12), + DECLARE_FAN_FAULT_ATTR(3,13), + DECLARE_FAN_FAULT_ATTR(4,14), + DECLARE_FAN_SPEED_RPM_ATTR(1,11), + DECLARE_FAN_SPEED_RPM_ATTR(2,12), + DECLARE_FAN_SPEED_RPM_ATTR(3,13), + DECLARE_FAN_SPEED_RPM_ATTR(4,14), + DECLARE_FAN_PRESENT_ATTR(1), + DECLARE_FAN_PRESENT_ATTR(2), + DECLARE_FAN_PRESENT_ATTR(3), + DECLARE_FAN_PRESENT_ATTR(4), + DECLARE_FAN_DIRECTION_ATTR(1), + DECLARE_FAN_DIRECTION_ATTR(2), + DECLARE_FAN_DIRECTION_ATTR(3), + DECLARE_FAN_DIRECTION_ATTR(4), + DECLARE_FAN_DUTY_CYCLE_ATTR(1), + NULL +}; + +#define FAN_DUTY_CYCLE_REG_MASK 0xF +#define FAN_MAX_DUTY_CYCLE 100 +#define FAN_REG_VAL_TO_SPEED_RPM_STEP 100 + +static int as7816_64x_fan_read_value(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int as7816_64x_fan_write_value(struct i2c_client *client, u8 reg, u8 value) +{ + return i2c_smbus_write_byte_data(client, reg, value); +} + +/* fan utility functions + */ +static u32 reg_val_to_duty_cycle(u8 reg_val) +{ + reg_val &= FAN_DUTY_CYCLE_REG_MASK; + + if (!reg_val) { + return 0; + } + + if (reg_val == 0xF) { + return FAN_MAX_DUTY_CYCLE; + } + + return (reg_val * 6) + 10; +} + +static u8 duty_cycle_to_reg_val(u8 duty_cycle) +{ + if (duty_cycle < 16) { + return 0; + } + + if (duty_cycle >= 100) { + return 0xF; + } + + return (duty_cycle - 10) / 6; +} + +static u32 reg_val_to_speed_rpm(u8 reg_val) +{ + return (u32)reg_val * FAN_REG_VAL_TO_SPEED_RPM_STEP; +} + +static u8 reg_val_to_direction(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + return !!(reg_val & mask); +} + +static u8 reg_val_to_is_present(u8 reg_val, enum fan_id id) +{ + u8 mask = (1 << id); + return !(reg_val & mask); +} + +static u8 is_fan_fault(struct as7816_64x_fan_data *data, enum fan_id id) +{ + u8 ret = 1; + int front_fan_index = FAN1_FRONT_SPEED_RPM + id; + int rear_fan_index = FAN1_REAR_SPEED_RPM + id; + + /* Check if the speed of front or rear fan is ZERO, + */ + if (reg_val_to_speed_rpm(data->reg_val[front_fan_index]) && + reg_val_to_speed_rpm(data->reg_val[rear_fan_index])) { + ret = 0; + } + + return ret; +} + +static ssize_t set_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int error, value; + struct i2c_client *client = to_i2c_client(dev); + + error = kstrtoint(buf, 10, &value); + if (error) + return error; + + if (value < 0 || value > FAN_MAX_DUTY_CYCLE) + return -EINVAL; + + as7816_64x_fan_write_value(client, 0x28, 0); /* Disable fan speed watch dog */ + as7816_64x_fan_write_value(client, fan_reg[FAN_DUTY_CYCLE_PERCENTAGE], duty_cycle_to_reg_val(value)); + return count; +} + +static ssize_t fan_show_value(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7816_64x_fan_data *data = as7816_64x_fan_update_device(dev); + ssize_t ret = 0; + + if (data->valid) { + switch (attr->index) { + case FAN_DUTY_CYCLE_PERCENTAGE: + { + u32 duty_cycle = reg_val_to_duty_cycle(data->reg_val[FAN_DUTY_CYCLE_PERCENTAGE]); + ret = sprintf(buf, "%u\n", duty_cycle); + break; + } + case FAN1_FRONT_SPEED_RPM: + case FAN2_FRONT_SPEED_RPM: + case FAN3_FRONT_SPEED_RPM: + case FAN4_FRONT_SPEED_RPM: + case FAN1_REAR_SPEED_RPM: + case FAN2_REAR_SPEED_RPM: + case FAN3_REAR_SPEED_RPM: + case FAN4_REAR_SPEED_RPM: + { + ret = sprintf(buf, "%u\n", reg_val_to_speed_rpm(data->reg_val[attr->index])); + break; + } + case FAN1_PRESENT: + case FAN2_PRESENT: + case FAN3_PRESENT: + case FAN4_PRESENT: + ret = sprintf(buf, "%d\n", + reg_val_to_is_present(data->reg_val[FAN_PRESENT_REG], + attr->index - FAN1_PRESENT)); + break; + case FAN1_FAULT: + case FAN2_FAULT: + case FAN3_FAULT: + case FAN4_FAULT: + ret = sprintf(buf, "%d\n", is_fan_fault(data, attr->index - FAN1_FAULT)); + break; + case FAN1_DIRECTION: + case FAN2_DIRECTION: + case FAN3_DIRECTION: + case FAN4_DIRECTION: + ret = sprintf(buf, "%d\n", + reg_val_to_direction(data->reg_val[FAN_DIRECTION_REG], + attr->index - FAN1_DIRECTION)); + break; + default: + break; + } + } + + return ret; +} + +static const struct attribute_group as7816_64x_fan_group = { + .attrs = as7816_64x_fan_attributes, +}; + +static struct as7816_64x_fan_data *as7816_64x_fan_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7816_64x_fan_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || + !data->valid) { + int i; + + dev_dbg(&client->dev, "Starting as7816_64x_fan update\n"); + data->valid = 0; + + /* Update fan data + */ + for (i = 0; i < ARRAY_SIZE(data->reg_val); i++) { + int status = as7816_64x_fan_read_value(client, fan_reg[i]); + + if (status < 0) { + data->valid = 0; + mutex_unlock(&data->update_lock); + dev_dbg(&client->dev, "reg %d, err %d\n", fan_reg[i], status); + return data; + } + else { + data->reg_val[i] = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int as7816_64x_fan_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7816_64x_fan_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7816_64x_fan_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7816_64x_fan_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: fan '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7816_64x_fan_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7816_64x_fan_remove(struct i2c_client *client) +{ + struct as7816_64x_fan_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7816_64x_fan_group); + + return 0; +} + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +static const struct i2c_device_id as7816_64x_fan_id[] = { + { "as7816_64x_fan", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7816_64x_fan_id); + +static struct i2c_driver as7816_64x_fan_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = DRVNAME, + }, + .probe = as7816_64x_fan_probe, + .remove = as7816_64x_fan_remove, + .id_table = as7816_64x_fan_id, + .address_list = normal_i2c, +}; + +static int __init as7816_64x_fan_init(void) +{ + return i2c_add_driver(&as7816_64x_fan_driver); +} + +static void __exit as7816_64x_fan_exit(void) +{ + i2c_del_driver(&as7816_64x_fan_driver); +} + +module_init(as7816_64x_fan_init); +module_exit(as7816_64x_fan_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7816_64x_fan driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-leds.c b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-leds.c new file mode 100644 index 000000000000..025f87d692a3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-leds.c @@ -0,0 +1,460 @@ +/* + * A LED driver for the as7816_64x_led + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/*#define DEBUG*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +extern int accton_i2c_cpld_read (u8 cpld_addr, u8 reg); +extern int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + +extern void led_classdev_unregister(struct led_classdev *led_cdev); +extern int led_classdev_register(struct device *parent, struct led_classdev *led_cdev); +extern void led_classdev_resume(struct led_classdev *led_cdev); +extern void led_classdev_suspend(struct led_classdev *led_cdev); + +#define DRVNAME "as7816_64x_led" + +struct as7816_64x_led_data { + struct platform_device *pdev; + struct mutex update_lock; + char valid; /* != 0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 reg_val[1]; /* only 1 register*/ +}; + +static struct as7816_64x_led_data *ledctl = NULL; + +/* LED related data + */ + +#define LED_CNTRLER_I2C_ADDRESS (0x60) + +#define LED_TYPE_DIAG_REG_MASK (0x03) +#define LED_MODE_DIAG_YELLOW_VALUE (0x00) +#define LED_MODE_DIAG_RED_VALUE (0x01) +#define LED_MODE_DIAG_GREEN_VALUE (0x02) +#define LED_MODE_DIAG_OFF_VALUE (0x03) + +#define LED_TYPE_LOC_REG_MASK (0x10) +#define LED_MODE_LOC_ORANGE_VALUE (0x00) +#define LED_MODE_LOC_OFF_VALUE (0x10) + +#define LED_TYPE_FAN_REG_MASK (0x0C) +#define LED_MODE_FAN_ORANGE_VALUE (0x04) +#define LED_MODE_FAN_GREEN_VALUE_1 (0x00) +#define LED_MODE_FAN_GREEN_VALUE_2 (0x08) +#define LED_MODE_FAN_OFF_VALUE (0x0C) + +enum led_type { + LED_TYPE_DIAG, + LED_TYPE_LOC, + LED_TYPE_FAN, + LED_TYPE_PSU1, + LED_TYPE_PSU2 +}; + +struct led_reg { + u32 types; + u8 reg_addr; +}; + +static const struct led_reg led_reg_map[] = { + {(1 << LED_TYPE_LOC) | (1 << LED_TYPE_DIAG) | (1 << LED_TYPE_FAN), 0x30}, +}; + +enum led_light_mode { + LED_MODE_OFF, + LED_MODE_RED = 10, + LED_MODE_RED_BLINKING = 11, + LED_MODE_ORANGE = 12, + LED_MODE_ORANGE_BLINKING = 13, + LED_MODE_YELLOW = 14, + LED_MODE_YELLOW_BLINKING = 15, + LED_MODE_GREEN = 16, + LED_MODE_GREEN_BLINKING = 17, + LED_MODE_BLUE = 18, + LED_MODE_BLUE_BLINKING = 19, + LED_MODE_PURPLE = 20, + LED_MODE_PURPLE_BLINKING = 21, + LED_MODE_AUTO = 22, + LED_MODE_AUTO_BLINKING = 23, + LED_MODE_WHITE = 24, + LED_MODE_WHITE_BLINKING = 25, + LED_MODE_CYAN = 26, + LED_MODE_CYAN_BLINKING = 27, + LED_MODE_UNKNOWN = 99 +}; + +struct led_type_mode { + enum led_type type; + enum led_light_mode mode; + int reg_bit_mask; + int mode_value; +}; + +static struct led_type_mode led_type_mode_data[] = { +{LED_TYPE_LOC, LED_MODE_OFF, LED_TYPE_LOC_REG_MASK, LED_MODE_LOC_OFF_VALUE}, +{LED_TYPE_LOC, LED_MODE_ORANGE,LED_TYPE_LOC_REG_MASK, LED_MODE_LOC_ORANGE_VALUE}, +{LED_TYPE_DIAG, LED_MODE_OFF, LED_TYPE_DIAG_REG_MASK, LED_MODE_DIAG_OFF_VALUE}, +{LED_TYPE_DIAG, LED_MODE_GREEN, LED_TYPE_DIAG_REG_MASK, LED_MODE_DIAG_GREEN_VALUE}, +{LED_TYPE_DIAG, LED_MODE_RED, LED_TYPE_DIAG_REG_MASK, LED_MODE_DIAG_RED_VALUE}, +{LED_TYPE_DIAG, LED_MODE_YELLOW,LED_TYPE_DIAG_REG_MASK, LED_MODE_DIAG_YELLOW_VALUE}, +{LED_TYPE_FAN, LED_MODE_OFF, LED_TYPE_FAN_REG_MASK, LED_MODE_FAN_OFF_VALUE}, +{LED_TYPE_FAN, LED_MODE_GREEN, LED_TYPE_FAN_REG_MASK, LED_MODE_FAN_GREEN_VALUE_1}, +{LED_TYPE_FAN, LED_MODE_GREEN, LED_TYPE_FAN_REG_MASK, LED_MODE_FAN_GREEN_VALUE_2}, +{LED_TYPE_FAN, LED_MODE_ORANGE,LED_TYPE_FAN_REG_MASK, LED_MODE_FAN_ORANGE_VALUE} +}; + +static int get_led_reg(enum led_type type, u8 *reg) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(led_reg_map); i++) { + if(led_reg_map[i].types & (1 << type)) { + *reg = led_reg_map[i].reg_addr; + return 0; + } + } + + return 1; +} + +static int led_reg_val_to_light_mode(enum led_type type, u8 reg_val) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(led_type_mode_data); i++) { + + if (type != led_type_mode_data[i].type) + continue; + + if ((led_type_mode_data[i].reg_bit_mask & reg_val) == + led_type_mode_data[i].mode_value) + { + return led_type_mode_data[i].mode; + } + } + + return 0; +} + +static u8 led_light_mode_to_reg_val(enum led_type type, + enum led_light_mode mode, u8 reg_val) { + int i; + + for (i = 0; i < ARRAY_SIZE(led_type_mode_data); i++) { + if (type != led_type_mode_data[i].type) + continue; + + if (mode != led_type_mode_data[i].mode) + continue; + + reg_val = led_type_mode_data[i].mode_value | + (reg_val & (~led_type_mode_data[i].reg_bit_mask)); + break; + } + + return reg_val; +} + +static int as7816_64x_led_read_value(u8 reg) +{ + return accton_i2c_cpld_read(LED_CNTRLER_I2C_ADDRESS, reg); +} + +static int as7816_64x_led_write_value(u8 reg, u8 value) +{ + return accton_i2c_cpld_write(LED_CNTRLER_I2C_ADDRESS, reg, value); +} + +static void as7816_64x_led_update(void) +{ + mutex_lock(&ledctl->update_lock); + + if (time_after(jiffies, ledctl->last_updated + HZ + HZ / 2) + || !ledctl->valid) { + int i; + + dev_dbg(&ledctl->pdev->dev, "Starting as7816_64x_led update\n"); + + /* Update LED data + */ + for (i = 0; i < ARRAY_SIZE(ledctl->reg_val); i++) { + int status = as7816_64x_led_read_value(led_reg_map[i].reg_addr); + + if (status < 0) { + ledctl->valid = 0; + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", led_reg_map[i].reg_addr, status); + goto exit; + } + else + { + ledctl->reg_val[i] = status; + } + } + + ledctl->last_updated = jiffies; + ledctl->valid = 1; + } + +exit: + mutex_unlock(&ledctl->update_lock); +} + +static void as7816_64x_led_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode, + enum led_type type) +{ + int reg_val; + u8 reg ; + mutex_lock(&ledctl->update_lock); + + if( !get_led_reg(type, ®)) { + dev_dbg(&ledctl->pdev->dev, "Not match register for %d.\n", type); + } + + reg_val = as7816_64x_led_read_value(reg); + if (reg_val < 0) { + dev_dbg(&ledctl->pdev->dev, "reg %d, err %d\n", reg, reg_val); + goto exit; + } + + reg_val = led_light_mode_to_reg_val(type, led_light_mode, reg_val); + as7816_64x_led_write_value(reg, reg_val); + + /* to prevent the slow-update issue */ + ledctl->valid = 0; + +exit: + mutex_unlock(&ledctl->update_lock); +} + + +static void as7816_64x_led_diag_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + as7816_64x_led_set(led_cdev, led_light_mode, LED_TYPE_DIAG); +} + +static enum led_brightness as7816_64x_led_diag_get(struct led_classdev *cdev) +{ + as7816_64x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_DIAG, ledctl->reg_val[0]); +} + +static void as7816_64x_led_loc_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + as7816_64x_led_set(led_cdev, led_light_mode, LED_TYPE_LOC); +} + +static enum led_brightness as7816_64x_led_loc_get(struct led_classdev *cdev) +{ + as7816_64x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_LOC, ledctl->reg_val[0]); +} + +static void as7816_64x_led_fan_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ + as7816_64x_led_set(led_cdev, led_light_mode, LED_TYPE_FAN); +} + +static enum led_brightness as7816_64x_led_fan_get(struct led_classdev *cdev) +{ + as7816_64x_led_update(); + return led_reg_val_to_light_mode(LED_TYPE_FAN, ledctl->reg_val[0]); +} + +static void as7816_64x_led_auto_set(struct led_classdev *led_cdev, + enum led_brightness led_light_mode) +{ +} + +static enum led_brightness as7816_64x_led_auto_get(struct led_classdev *cdev) +{ + return LED_MODE_AUTO; +} + +static struct led_classdev as7816_64x_leds[] = { + [LED_TYPE_DIAG] = { + .name = "as7816_64x_led::diag", + .default_trigger = "unused", + .brightness_set = as7816_64x_led_diag_set, + .brightness_get = as7816_64x_led_diag_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_GREEN, + }, + [LED_TYPE_LOC] = { + .name = "as7816_64x_led::loc", + .default_trigger = "unused", + .brightness_set = as7816_64x_led_loc_set, + .brightness_get = as7816_64x_led_loc_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_ORANGE, + }, + [LED_TYPE_FAN] = { + .name = "as7816_64x_led::fan", + .default_trigger = "unused", + .brightness_set = as7816_64x_led_fan_set, + .brightness_get = as7816_64x_led_fan_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_GREEN, + }, + [LED_TYPE_PSU1] = { + .name = "as7816_64x_led::psu1", + .default_trigger = "unused", + .brightness_set = as7816_64x_led_auto_set, + .brightness_get = as7816_64x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, + [LED_TYPE_PSU2] = { + .name = "as7816_64x_led::psu2", + .default_trigger = "unused", + .brightness_set = as7816_64x_led_auto_set, + .brightness_get = as7816_64x_led_auto_get, + .flags = LED_CORE_SUSPENDRESUME, + .max_brightness = LED_MODE_AUTO, + }, +}; + +static int as7816_64x_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(as7816_64x_leds); i++) { + led_classdev_suspend(&as7816_64x_leds[i]); + } + + return 0; +} + +static int as7816_64x_led_resume(struct platform_device *dev) +{ + int i = 0; + + for (i = 0; i < ARRAY_SIZE(as7816_64x_leds); i++) { + led_classdev_resume(&as7816_64x_leds[i]); + } + + return 0; +} + +static int as7816_64x_led_probe(struct platform_device *pdev) +{ + int ret, i; + + for (i = 0; i < ARRAY_SIZE(as7816_64x_leds); i++) { + ret = led_classdev_register(&pdev->dev, &as7816_64x_leds[i]); + + if (ret < 0) + break; + } + + /* Check if all LEDs were successfully registered */ + if (i != ARRAY_SIZE(as7816_64x_leds)){ + int j; + + /* only unregister the LEDs that were successfully registered */ + for (j = 0; j < i; j++) { + led_classdev_unregister(&as7816_64x_leds[i]); + } + } + + return ret; +} + +static int as7816_64x_led_remove(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(as7816_64x_leds); i++) { + led_classdev_unregister(&as7816_64x_leds[i]); + } + + return 0; +} + +static struct platform_driver as7816_64x_led_driver = { + .probe = as7816_64x_led_probe, + .remove = as7816_64x_led_remove, + .suspend = as7816_64x_led_suspend, + .resume = as7816_64x_led_resume, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init as7816_64x_led_init(void) +{ + int ret; + + ret = platform_driver_register(&as7816_64x_led_driver); + if (ret < 0) { + goto exit; + } + + ledctl = kzalloc(sizeof(struct as7816_64x_led_data), GFP_KERNEL); + if (!ledctl) { + ret = -ENOMEM; + platform_driver_unregister(&as7816_64x_led_driver); + goto exit; + } + + mutex_init(&ledctl->update_lock); + + ledctl->pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0); + if (IS_ERR(ledctl->pdev)) { + ret = PTR_ERR(ledctl->pdev); + platform_driver_unregister(&as7816_64x_led_driver); + kfree(ledctl); + goto exit; + } + +exit: + return ret; +} + +static void __exit as7816_64x_led_exit(void) +{ + platform_device_unregister(ledctl->pdev); + platform_driver_unregister(&as7816_64x_led_driver); + kfree(ledctl); +} + +module_init(as7816_64x_led_init); +module_exit(as7816_64x_led_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7816_64x_led driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-psu.c b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-psu.c new file mode 100644 index 000000000000..cdc535347dc0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-psu.c @@ -0,0 +1,239 @@ +/* + * An hwmon driver for accton as7816_64x Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PSU_STATUS_I2C_ADDR 0x60 +#define PSU_STATUS_I2C_REG_OFFSET 0x03 + +#define IS_POWER_GOOD(id, value) (!!(value & BIT(2+id))) +#define IS_PRESENT(id, value) (!(value & BIT(id))) + +static ssize_t show_status(struct device *dev, struct device_attribute *da, char *buf); +static struct as7816_64x_psu_data *as7816_64x_psu_update_device(struct device *dev); +extern int accton_i2c_cpld_read (u8 cpld_addr, u8 reg); + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct as7816_64x_psu_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + u8 status; /* Status(present/power_good) register read from CPLD */ +}; + +enum as7816_64x_psu_sysfs_attributes { + PSU_PRESENT, + PSU_POWER_GOOD +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_present, S_IRUGO, show_status, NULL, PSU_PRESENT); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_status, NULL, PSU_POWER_GOOD); + +static struct attribute *as7816_64x_psu_attributes[] = { + &sensor_dev_attr_psu_present.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + NULL +}; + +static ssize_t show_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct as7816_64x_psu_data *data = as7816_64x_psu_update_device(dev); + u8 status = 0; + + if (!data->valid) { + return -EIO; + } + + if (attr->index == PSU_PRESENT) { + status = IS_PRESENT(data->index, data->status); + } + else { /* PSU_POWER_GOOD */ + status = IS_POWER_GOOD(data->index, data->status); + } + + return sprintf(buf, "%d\n", status); +} + +static const struct attribute_group as7816_64x_psu_group = { + .attrs = as7816_64x_psu_attributes, +}; + +static int as7816_64x_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct as7816_64x_psu_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct as7816_64x_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &as7816_64x_psu_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &as7816_64x_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int as7816_64x_psu_remove(struct i2c_client *client) +{ + struct as7816_64x_psu_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &as7816_64x_psu_group); + kfree(data); + + return 0; +} + +enum psu_index +{ + as7816_64x_psu1, + as7816_64x_psu2 +}; + +static const struct i2c_device_id as7816_64x_psu_id[] = { + { "as7816_64x_psu1", as7816_64x_psu1 }, + { "as7816_64x_psu2", as7816_64x_psu2 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, as7816_64x_psu_id); + +static struct i2c_driver as7816_64x_psu_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "as7816_64x_psu", + }, + .probe = as7816_64x_psu_probe, + .remove = as7816_64x_psu_remove, + .id_table = as7816_64x_psu_id, + .address_list = normal_i2c, +}; + +static struct as7816_64x_psu_data *as7816_64x_psu_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct as7816_64x_psu_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int status; + + data->valid = 0; + dev_dbg(&client->dev, "Starting as7816_64x update\n"); + + /* Read psu status */ + status = accton_i2c_cpld_read(PSU_STATUS_I2C_ADDR, PSU_STATUS_I2C_REG_OFFSET); + + if (status < 0) { + dev_dbg(&client->dev, "cpld reg (0x%x) err %d\n", PSU_STATUS_I2C_ADDR, status); + goto exit; + } + else { + data->status = status; + } + + data->last_updated = jiffies; + data->valid = 1; + } + +exit: + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init as7816_64x_psu_init(void) +{ + return i2c_add_driver(&as7816_64x_psu_driver); +} + +static void __exit as7816_64x_psu_exit(void) +{ + i2c_del_driver(&as7816_64x_psu_driver); +} + +module_init(as7816_64x_psu_init); +module_exit(as7816_64x_psu_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("as7816_64x_psu driver"); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-sfp.c b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-sfp.c new file mode 100644 index 000000000000..76444ebbafcb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/x86-64-accton-as7816-64x-sfp.c @@ -0,0 +1,1576 @@ +/* + * SFP driver for accton as7816_64x sfp + * + * Copyright (C) Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "as7816_64x_sfp" /* Platform dependent */ + +#define DEBUG_MODE 0 + +#if (DEBUG_MODE == 1) + #define DEBUG_PRINT(fmt, args...) \ + printk (KERN_INFO "%s:%s[%d]: " fmt "\r\n", __FILE__, __FUNCTION__, __LINE__, ##args) +#else + #define DEBUG_PRINT(fmt, args...) +#endif + +#define NUM_OF_SFP_PORT 24 +#define EEPROM_NAME "sfp_eeprom" +#define EEPROM_SIZE 256 /* 256 byte eeprom */ +#define BIT_INDEX(i) (1ULL << (i)) +#define USE_I2C_BLOCK_READ 1 /* Platform dependent */ +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ + +#define SFP_EEPROM_A0_I2C_ADDR (0xA0 >> 1) + +#define SFF8024_PHYSICAL_DEVICE_ID_ADDR 0x0 +#define SFF8024_DEVICE_ID_SFP 0x3 +#define SFF8024_DEVICE_ID_QSFP 0xC +#define SFF8024_DEVICE_ID_QSFP_PLUS 0xD +#define SFF8024_DEVICE_ID_QSFP28 0x11 + +#define SFF8436_RX_LOS_ADDR 3 +#define SFF8436_TX_FAULT_ADDR 4 +#define SFF8436_TX_DISABLE_ADDR 86 + +#define MULTIPAGE_SUPPORT 1 + +#if (MULTIPAGE_SUPPORT == 1) +/* fundamental unit of addressing for SFF_8472/SFF_8436 */ +#define SFF_8436_PAGE_SIZE 128 +/* + * The current 8436 (QSFP) spec provides for only 4 supported + * pages (pages 0-3). + * This driver is prepared to support more, but needs a register in the + * EEPROM to indicate how many pages are supported before it is safe + * to implement more pages in the driver. + */ +#define SFF_8436_SPECED_PAGES 4 +#define SFF_8436_EEPROM_SIZE ((1 + SFF_8436_SPECED_PAGES) * SFF_8436_PAGE_SIZE) +#define SFF_8436_EEPROM_UNPAGED_SIZE (2 * SFF_8436_PAGE_SIZE) +/* + * The current 8472 (SFP) spec provides for only 3 supported + * pages (pages 0-2). + * This driver is prepared to support more, but needs a register in the + * EEPROM to indicate how many pages are supported before it is safe + * to implement more pages in the driver. + */ +#define SFF_8472_SPECED_PAGES 3 +#define SFF_8472_EEPROM_SIZE ((3 + SFF_8472_SPECED_PAGES) * SFF_8436_PAGE_SIZE) +#define SFF_8472_EEPROM_UNPAGED_SIZE (4 * SFF_8436_PAGE_SIZE) + +/* a few constants to find our way around the EEPROM */ +#define SFF_8436_PAGE_SELECT_REG 0x7F +#define SFF_8436_PAGEABLE_REG 0x02 +#define SFF_8436_NOT_PAGEABLE (1<<2) +#define SFF_8472_PAGEABLE_REG 0x40 +#define SFF_8472_PAGEABLE (1<<4) + +/* + * This parameter is to help this driver avoid blocking other drivers out + * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C + * clock, one 256 byte read takes about 1/43 second which is excessive; + * but the 1/170 second it takes at 400 kHz may be quite reasonable; and + * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible. + * + * This value is forced to be a power of two so that writes align on pages. + */ +static unsigned io_limit = SFF_8436_PAGE_SIZE; + +/* + * specs often allow 5 msec for a page write, sometimes 20 msec; + * it's important to recover from write timeouts. + */ +static unsigned write_timeout = 25; + +typedef enum qsfp_opcode { + QSFP_READ_OP = 0, + QSFP_WRITE_OP = 1 +} qsfp_opcode_e; +#endif + +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_present(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t qsfp_show_tx_rx_status(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t qsfp_set_tx_disable(struct device *dev, struct device_attribute *da, const char *buf, size_t count);; +static ssize_t sfp_eeprom_read(struct i2c_client *, u8, u8 *,int); +static ssize_t sfp_eeprom_write(struct i2c_client *, u8 , const char *,int); +extern int accton_i2c_cpld_read (u8 cpld_addr, u8 reg); + +enum sfp_sysfs_attributes { + PRESENT, + PRESENT_ALL, + PORT_NUMBER, + PORT_TYPE, + DDM_IMPLEMENTED, + TX_FAULT, + TX_FAULT1, + TX_FAULT2, + TX_FAULT3, + TX_FAULT4, + TX_DISABLE, + TX_DISABLE1, + TX_DISABLE2, + TX_DISABLE3, + TX_DISABLE4, + RX_LOS, + RX_LOS1, + RX_LOS2, + RX_LOS3, + RX_LOS4, + RX_LOS_ALL +}; + +/* SFP/QSFP common attributes for sysfs */ +static SENSOR_DEVICE_ATTR(sfp_port_number, S_IRUGO, show_port_number, NULL, PORT_NUMBER); +static SENSOR_DEVICE_ATTR(sfp_is_present, S_IRUGO, show_present, NULL, PRESENT); +static SENSOR_DEVICE_ATTR(sfp_is_present_all, S_IRUGO, show_present, NULL, PRESENT_ALL); +static SENSOR_DEVICE_ATTR(sfp_tx_disable, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE); +static SENSOR_DEVICE_ATTR(sfp_tx_fault, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT); + +/* QSFP attributes for sysfs */ +static SENSOR_DEVICE_ATTR(sfp_rx_los, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS); +static SENSOR_DEVICE_ATTR(sfp_rx_los1, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS1); +static SENSOR_DEVICE_ATTR(sfp_rx_los2, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS2); +static SENSOR_DEVICE_ATTR(sfp_rx_los3, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS3); +static SENSOR_DEVICE_ATTR(sfp_rx_los4, S_IRUGO, qsfp_show_tx_rx_status, NULL, RX_LOS4); +static SENSOR_DEVICE_ATTR(sfp_tx_disable1, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE1); +static SENSOR_DEVICE_ATTR(sfp_tx_disable2, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE2); +static SENSOR_DEVICE_ATTR(sfp_tx_disable3, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE3); +static SENSOR_DEVICE_ATTR(sfp_tx_disable4, S_IWUSR | S_IRUGO, qsfp_show_tx_rx_status, qsfp_set_tx_disable, TX_DISABLE4); +static SENSOR_DEVICE_ATTR(sfp_tx_fault1, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT1); +static SENSOR_DEVICE_ATTR(sfp_tx_fault2, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT2); +static SENSOR_DEVICE_ATTR(sfp_tx_fault3, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT3); +static SENSOR_DEVICE_ATTR(sfp_tx_fault4, S_IRUGO, qsfp_show_tx_rx_status, NULL, TX_FAULT4); +static struct attribute *qsfp_attributes[] = { + &sensor_dev_attr_sfp_port_number.dev_attr.attr, + &sensor_dev_attr_sfp_is_present.dev_attr.attr, + &sensor_dev_attr_sfp_is_present_all.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los1.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los2.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los3.dev_attr.attr, + &sensor_dev_attr_sfp_rx_los4.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable1.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable2.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable3.dev_attr.attr, + &sensor_dev_attr_sfp_tx_disable4.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault1.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault2.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault3.dev_attr.attr, + &sensor_dev_attr_sfp_tx_fault4.dev_attr.attr, + NULL +}; + +/* Platform dependent +++ */ +#define CPLD_PORT_TO_FRONT_PORT(port) (port+1) + +enum port_numbers { +as7816_64x_port1, as7816_64x_port2, as7816_64x_port3, as7816_64x_port4, +as7816_64x_port5, as7816_64x_port6, as7816_64x_port7, as7816_64x_port8, +as7816_64x_port9, as7816_64x_port10, as7816_64x_port11, as7816_64x_port12, +as7816_64x_port13, as7816_64x_port14, as7816_64x_port15, as7816_64x_port16, +as7816_64x_port17, as7816_64x_port18, as7816_64x_port19, as7816_64x_port20, +as7816_64x_port21, as7816_64x_port22, as7816_64x_port23, as7816_64x_port24, +as7816_64x_port25, as7816_64x_port26, as7816_64x_port27, as7816_64x_port28, +as7816_64x_port29, as7816_64x_port30, as7816_64x_port31, as7816_64x_port32, +as7816_64x_port33, as7816_64x_port34, as7816_64x_port35, as7816_64x_port36, +as7816_64x_port37, as7816_64x_port38, as7816_64x_port39, as7816_64x_port40, +as7816_64x_port41, as7816_64x_port42, as7816_64x_port43, as7816_64x_port44, +as7816_64x_port45, as7816_64x_port46, as7816_64x_port47, as7816_64x_port48, +as7816_64x_port49, as7816_64x_port50, as7816_64x_port51, as7816_64x_port52, +as7816_64x_port53, as7816_64x_port54, as7816_64x_port55, as7816_64x_port56, +as7816_64x_port57, as7816_64x_port58, as7816_64x_port59, as7816_64x_port60, +as7816_64x_port61, as7816_64x_port62, as7816_64x_port63, as7816_64x_port64 +}; + +#define I2C_DEV_ID(x) { #x, x} + +static const struct i2c_device_id sfp_device_id[] = { +I2C_DEV_ID(as7816_64x_port1), +I2C_DEV_ID(as7816_64x_port2), +I2C_DEV_ID(as7816_64x_port3), +I2C_DEV_ID(as7816_64x_port4), +I2C_DEV_ID(as7816_64x_port5), +I2C_DEV_ID(as7816_64x_port6), +I2C_DEV_ID(as7816_64x_port7), +I2C_DEV_ID(as7816_64x_port8), +I2C_DEV_ID(as7816_64x_port9), +I2C_DEV_ID(as7816_64x_port10), +I2C_DEV_ID(as7816_64x_port11), +I2C_DEV_ID(as7816_64x_port12), +I2C_DEV_ID(as7816_64x_port13), +I2C_DEV_ID(as7816_64x_port14), +I2C_DEV_ID(as7816_64x_port15), +I2C_DEV_ID(as7816_64x_port16), +I2C_DEV_ID(as7816_64x_port17), +I2C_DEV_ID(as7816_64x_port18), +I2C_DEV_ID(as7816_64x_port19), +I2C_DEV_ID(as7816_64x_port20), +I2C_DEV_ID(as7816_64x_port21), +I2C_DEV_ID(as7816_64x_port22), +I2C_DEV_ID(as7816_64x_port23), +I2C_DEV_ID(as7816_64x_port24), +I2C_DEV_ID(as7816_64x_port25), +I2C_DEV_ID(as7816_64x_port26), +I2C_DEV_ID(as7816_64x_port27), +I2C_DEV_ID(as7816_64x_port28), +I2C_DEV_ID(as7816_64x_port29), +I2C_DEV_ID(as7816_64x_port30), +I2C_DEV_ID(as7816_64x_port31), +I2C_DEV_ID(as7816_64x_port32), +I2C_DEV_ID(as7816_64x_port33), +I2C_DEV_ID(as7816_64x_port34), +I2C_DEV_ID(as7816_64x_port35), +I2C_DEV_ID(as7816_64x_port36), +I2C_DEV_ID(as7816_64x_port37), +I2C_DEV_ID(as7816_64x_port38), +I2C_DEV_ID(as7816_64x_port39), +I2C_DEV_ID(as7816_64x_port40), +I2C_DEV_ID(as7816_64x_port41), +I2C_DEV_ID(as7816_64x_port42), +I2C_DEV_ID(as7816_64x_port43), +I2C_DEV_ID(as7816_64x_port44), +I2C_DEV_ID(as7816_64x_port45), +I2C_DEV_ID(as7816_64x_port46), +I2C_DEV_ID(as7816_64x_port47), +I2C_DEV_ID(as7816_64x_port48), +I2C_DEV_ID(as7816_64x_port49), +I2C_DEV_ID(as7816_64x_port50), +I2C_DEV_ID(as7816_64x_port51), +I2C_DEV_ID(as7816_64x_port52), +I2C_DEV_ID(as7816_64x_port53), +I2C_DEV_ID(as7816_64x_port54), +I2C_DEV_ID(as7816_64x_port55), +I2C_DEV_ID(as7816_64x_port56), +I2C_DEV_ID(as7816_64x_port57), +I2C_DEV_ID(as7816_64x_port58), +I2C_DEV_ID(as7816_64x_port59), +I2C_DEV_ID(as7816_64x_port60), +I2C_DEV_ID(as7816_64x_port61), +I2C_DEV_ID(as7816_64x_port62), +I2C_DEV_ID(as7816_64x_port63), +I2C_DEV_ID(as7816_64x_port64), +{ /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, sfp_device_id); +/* Platform dependent --- */ + +enum driver_type_e { + DRIVER_TYPE_SFP_MSA, + DRIVER_TYPE_SFP_DDM, + DRIVER_TYPE_QSFP, + DRIVER_TYPE_XFP +}; + +/* Each client has this additional data + */ +struct eeprom_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + struct bin_attribute bin; /* eeprom data */ +}; + +struct qsfp_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 status[3]; /* bit0:port0, bit1:port1 and so on */ + /* index 0 => tx_fail + 1 => tx_disable + 2 => rx_loss */ + u8 device_id; + struct eeprom_data eeprom; +}; + +struct sfp_port_data { + struct mutex update_lock; + enum driver_type_e driver_type; + int port; /* CPLD port index */ + u64 present; /* present status, bit0:port0, bit1:port1 and so on */ + + struct qsfp_data *qsfp; + + struct i2c_client *client; +#if (MULTIPAGE_SUPPORT == 1) + int use_smbus; + u8 *writebuf; + unsigned write_max; +#endif +}; + +#if (MULTIPAGE_SUPPORT == 1) +static ssize_t sfp_port_read_write(struct sfp_port_data *port_data, + char *buf, loff_t off, size_t len, qsfp_opcode_e opcode); +#endif +static ssize_t show_port_number(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + return sprintf(buf, "%d\n", CPLD_PORT_TO_FRONT_PORT(data->port)); +} + +/* Platform dependent +++ */ +static struct sfp_port_data *sfp_update_present(struct i2c_client *client) +{ + struct sfp_port_data *data = i2c_get_clientdata(client); + int i = 0; + int status = -1; + u8 regs[] = {0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77}; + + DEBUG_PRINT("Starting sfp present status update"); + mutex_lock(&data->update_lock); + + /* Read present status of port 1~64 */ + data->present = 0; + + for (i = 0; i < ARRAY_SIZE(regs); i++) { + status = accton_i2c_cpld_read(0x60, regs[i]); + + if (status < 0) { + DEBUG_PRINT("cpld(0x60) reg(0x%x) err %d", regs[i], status); + goto exit; + } + + DEBUG_PRINT("Present status = 0x%lx", data->present); + data->present |= (u64)status << (i*8); + } + + DEBUG_PRINT("Present status = 0x%lx", data->present); +exit: + mutex_unlock(&data->update_lock); + return (status < 0) ? ERR_PTR(status) : data; +} + +/* Platform dependent --- */ + +static int sfp_is_port_present(struct i2c_client *client, int port) +{ + struct sfp_port_data *data = i2c_get_clientdata(client); + + data = sfp_update_present(client); + if (IS_ERR(data)) { + return PTR_ERR(data); + } + + return (data->present & BIT_INDEX(data->port)) ? 0 : 1; /* Platform dependent */ +} + +/* Platform dependent +++ */ +static ssize_t show_present(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + + if (PRESENT_ALL == attr->index) { + int i; + u8 values[8] = {0}; + struct sfp_port_data *data = sfp_update_present(client); + + if (IS_ERR(data)) { + return PTR_ERR(data); + } + + for (i = 0; i < ARRAY_SIZE(values); i++) { + values[i] = ~(u8)(data->present >> (i * 8)); + } + + /* Return values 1 -> 64 in order */ + return sprintf(buf, "%.2x %.2x %.2x %.2x %.2x %.2x %.2x %.2x\n", + values[0], values[1], values[2], values[3], + values[4], values[5], values[6], values[7]); + } + else { + struct sfp_port_data *data = i2c_get_clientdata(client); + int present = sfp_is_port_present(client, data->port); + + if (IS_ERR_VALUE(present)) { + return present; + } + + /* PRESENT */ + return sprintf(buf, "%d\n", present); + } +} +/* Platform dependent --- */ + +static struct sfp_port_data *qsfp_update_tx_rx_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + int i, status = -1; + u8 buf = 0; + u8 reg[] = {SFF8436_TX_FAULT_ADDR, SFF8436_TX_DISABLE_ADDR, SFF8436_RX_LOS_ADDR}; + + if (time_before(jiffies, data->qsfp->last_updated + HZ + HZ / 2) && data->qsfp->valid) { + return data; + } + + DEBUG_PRINT("Starting sfp tx rx status update"); + mutex_lock(&data->update_lock); + data->qsfp->valid = 0; + memset(data->qsfp->status, 0, sizeof(data->qsfp->status)); + + /* Notify device to update tx fault/ tx disable/ rx los status */ + for (i = 0; i < ARRAY_SIZE(reg); i++) { + status = sfp_eeprom_read(client, reg[i], &buf, sizeof(buf)); + if (unlikely(status < 0)) { + goto exit; + } + } + msleep(200); + + /* Read actual tx fault/ tx disable/ rx los status */ + for (i = 0; i < ARRAY_SIZE(reg); i++) { + status = sfp_eeprom_read(client, reg[i], &buf, sizeof(buf)); + if (unlikely(status < 0)) { + goto exit; + } + + DEBUG_PRINT("qsfp reg(0x%x) status = (0x%x)", reg[i], data->qsfp->status[i]); + data->qsfp->status[i] = (buf & 0xF); + } + + data->qsfp->valid = 1; + data->qsfp->last_updated = jiffies; + +exit: + mutex_unlock(&data->update_lock); + return (status < 0) ? ERR_PTR(status) : data; +} + +static ssize_t qsfp_show_tx_rx_status(struct device *dev, struct device_attribute *da, + char *buf) +{ + int present; + u8 val = 0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + + present = sfp_is_port_present(client, data->port); + if (IS_ERR_VALUE(present)) { + return present; + } + + if (present == 0) { + /* port is not present */ + return -ENXIO; + } + + data = qsfp_update_tx_rx_status(dev); + if (IS_ERR(data)) { + return PTR_ERR(data); + } + + switch (attr->index) { + case TX_FAULT: + val = !!(data->qsfp->status[2] & 0xF); + break; + case TX_FAULT1: + case TX_FAULT2: + case TX_FAULT3: + case TX_FAULT4: + val = !!(data->qsfp->status[2] & BIT_INDEX(attr->index - TX_FAULT1)); + break; + case TX_DISABLE: + val = data->qsfp->status[1] & 0xF; + break; + case TX_DISABLE1: + case TX_DISABLE2: + case TX_DISABLE3: + case TX_DISABLE4: + val = !!(data->qsfp->status[1] & BIT_INDEX(attr->index - TX_DISABLE1)); + break; + case RX_LOS: + val = !!(data->qsfp->status[0] & 0xF); + break; + case RX_LOS1: + case RX_LOS2: + case RX_LOS3: + case RX_LOS4: + val = !!(data->qsfp->status[0] & BIT_INDEX(attr->index - RX_LOS1)); + break; + default: + break; + } + + return sprintf(buf, "%d\n", val); +} + +static ssize_t qsfp_set_tx_disable(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + long disable; + int status; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct sfp_port_data *data = i2c_get_clientdata(client); + + status = sfp_is_port_present(client, data->port); + if (IS_ERR_VALUE(status)) { + return status; + } + + if (!status) { + /* port is not present */ + return -ENXIO; + } + + status = kstrtol(buf, 10, &disable); + if (status) { + return status; + } + + data = qsfp_update_tx_rx_status(dev); + if (IS_ERR(data)) { + return PTR_ERR(data); + } + + mutex_lock(&data->update_lock); + + if (attr->index == TX_DISABLE) { + if (disable) { + data->qsfp->status[1] |= 0xF; + } + else { + data->qsfp->status[1] &= ~0xF; + } + } + else {/* TX_DISABLE1 ~ TX_DISABLE4*/ + if (disable) { + data->qsfp->status[1] |= (1 << (attr->index - TX_DISABLE1)); + } + else { + data->qsfp->status[1] &= ~(1 << (attr->index - TX_DISABLE1)); + } + } + + DEBUG_PRINT("index = (%d), status = (0x%x)", attr->index, data->qsfp->status[1]); + status = sfp_eeprom_write(data->client, SFF8436_TX_DISABLE_ADDR, &data->qsfp->status[1], sizeof(data->qsfp->status[1])); + if (unlikely(status < 0)) { + count = status; + } + + mutex_unlock(&data->update_lock); + return count; +} + +static ssize_t sfp_eeprom_write(struct i2c_client *client, u8 command, const char *data, + int data_len) +{ +#if USE_I2C_BLOCK_READ + int status, retry = I2C_RW_RETRY_COUNT; + + if (data_len > I2C_SMBUS_BLOCK_MAX) { + data_len = I2C_SMBUS_BLOCK_MAX; + } + + while (retry) { + status = i2c_smbus_write_i2c_block_data(client, command, data_len, data); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(status < 0)) { + return status; + } + + return data_len; +#else + int status, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, command, *data); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(status < 0)) { + return status; + } + + return 1; +#endif + + +} + +#if (MULTIPAGE_SUPPORT == 0) +static ssize_t sfp_port_write(struct sfp_port_data *data, + const char *buf, loff_t off, size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) { + return count; + } + + /* + * Write data to chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&data->update_lock); + + while (count) { + ssize_t status; + + status = sfp_eeprom_write(data->client, off, buf, count); + if (status <= 0) { + if (retval == 0) { + retval = status; + } + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&data->update_lock); + return retval; +} +#endif + +static ssize_t sfp_bin_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + int present; + struct sfp_port_data *data; + DEBUG_PRINT("%s(%d) offset = (%d), count = (%d)", off, count); + data = dev_get_drvdata(container_of(kobj, struct device, kobj)); + + present = sfp_is_port_present(data->client, data->port); + if (IS_ERR_VALUE(present)) { + return present; + } + + if (present == 0) { + /* port is not present */ + return -ENODEV; + } + +#if (MULTIPAGE_SUPPORT == 1) + return sfp_port_read_write(data, buf, off, count, QSFP_WRITE_OP); +#else + return sfp_port_write(data, buf, off, count); +#endif +} + +static ssize_t sfp_eeprom_read(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ +#if USE_I2C_BLOCK_READ + int status, retry = I2C_RW_RETRY_COUNT; + + if (data_len > I2C_SMBUS_BLOCK_MAX) { + data_len = I2C_SMBUS_BLOCK_MAX; + } + + while (retry) { + status = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(status < 0)) { + goto abort; + } + if (unlikely(status != data_len)) { + status = -EIO; + goto abort; + } + + //result = data_len; + +abort: + return status; +#else + int status, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, command); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(status < 0)) { + dev_dbg(&client->dev, "sfp read byte data failed, command(0x%2x), data(0x%2x)\r\n", command, status); + goto abort; + } + + *data = (u8)status; + status = 1; + +abort: + return status; +#endif +} + +#if (MULTIPAGE_SUPPORT == 1) +/*-------------------------------------------------------------------------*/ +/* + * This routine computes the addressing information to be used for + * a given r/w request. + * + * Task is to calculate the client (0 = i2c addr 50, 1 = i2c addr 51), + * the page, and the offset. + * + * Handles both SFP and QSFP. + * For SFP, offset 0-255 are on client[0], >255 is on client[1] + * Offset 256-383 are on the lower half of client[1] + * Pages are accessible on the upper half of client[1]. + * Offset >383 are in 128 byte pages mapped into the upper half + * + * For QSFP, all offsets are on client[0] + * offset 0-127 are on the lower half of client[0] (no paging) + * Pages are accessible on the upper half of client[1]. + * Offset >127 are in 128 byte pages mapped into the upper half + * + * Callers must not read/write beyond the end of a client or a page + * without recomputing the client/page. Hence offset (within page) + * plus length must be less than or equal to 128. (Note that this + * routine does not have access to the length of the call, hence + * cannot do the validity check.) + * + * Offset within Lower Page 00h and Upper Page 00h are not recomputed + */ +static uint8_t sff_8436_translate_offset(struct sfp_port_data *port_data, + loff_t *offset, struct i2c_client **client) +{ + unsigned page = 0; + + *client = port_data->client; + + /* + * if offset is in the range 0-128... + * page doesn't matter (using lower half), return 0. + * offset is already correct (don't add 128 to get to paged area) + */ + if (*offset < SFF_8436_PAGE_SIZE) + return page; + + /* note, page will always be positive since *offset >= 128 */ + page = (*offset >> 7)-1; + /* 0x80 places the offset in the top half, offset is last 7 bits */ + *offset = SFF_8436_PAGE_SIZE + (*offset & 0x7f); + + return page; /* note also returning client and offset */ +} + +static ssize_t sff_8436_eeprom_read(struct sfp_port_data *port_data, + struct i2c_client *client, + char *buf, unsigned offset, size_t count) +{ + struct i2c_msg msg[2]; + u8 msgbuf[2]; + unsigned long timeout, read_time; + int status, i; + + memset(msg, 0, sizeof(msg)); + + switch (port_data->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + /*smaller eeproms can work given some SMBus extension calls */ + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + break; + case I2C_SMBUS_WORD_DATA: + /* Check for odd length transaction */ + count = (count == 1) ? 1 : 2; + break; + case I2C_SMBUS_BYTE_DATA: + count = 1; + break; + default: + /* + * When we have a better choice than SMBus calls, use a + * combined I2C message. Write address; then read up to + * io_limit data bytes. msgbuf is u8 and will cast to our + * needs. + */ + i = 0; + msgbuf[i++] = offset; + + msg[0].addr = client->addr; + msg[0].buf = msgbuf; + msg[0].len = i; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + } + + /* + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + read_time = jiffies; + + switch (port_data->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + status = i2c_smbus_read_i2c_block_data(client, offset, + count, buf); + break; + case I2C_SMBUS_WORD_DATA: + status = i2c_smbus_read_word_data(client, offset); + if (status >= 0) { + buf[0] = status & 0xff; + if (count == 2) + buf[1] = status >> 8; + status = count; + } + break; + case I2C_SMBUS_BYTE_DATA: + status = i2c_smbus_read_byte_data(client, offset); + if (status >= 0) { + buf[0] = status; + status = count; + } + break; + default: + status = i2c_transfer(client->adapter, msg, 2); + if (status == 2) + status = count; + } + + dev_dbg(&client->dev, "eeprom read %zu@%d --> %d (%ld)\n", + count, offset, status, jiffies); + + if (status == count) /* happy path */ + return count; + + if (status == -ENXIO) /* no module present */ + return status; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(read_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t sff_8436_eeprom_write(struct sfp_port_data *port_data, + struct i2c_client *client, + const char *buf, + unsigned offset, size_t count) +{ + struct i2c_msg msg; + ssize_t status; + unsigned long timeout, write_time; + unsigned next_page_start; + int i = 0; + + /* write max is at most a page + * (In this driver, write_max is actually one byte!) + */ + if (count > port_data->write_max) + count = port_data->write_max; + + /* shorten count if necessary to avoid crossing page boundary */ + next_page_start = roundup(offset + 1, SFF_8436_PAGE_SIZE); + if (offset + count > next_page_start) + count = next_page_start - offset; + + switch (port_data->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + /*smaller eeproms can work given some SMBus extension calls */ + if (count > I2C_SMBUS_BLOCK_MAX) + count = I2C_SMBUS_BLOCK_MAX; + break; + case I2C_SMBUS_WORD_DATA: + /* Check for odd length transaction */ + count = (count == 1) ? 1 : 2; + break; + case I2C_SMBUS_BYTE_DATA: + count = 1; + break; + default: + /* If we'll use I2C calls for I/O, set up the message */ + msg.addr = client->addr; + msg.flags = 0; + + /* msg.buf is u8 and casts will mask the values */ + msg.buf = port_data->writebuf; + + msg.buf[i++] = offset; + memcpy(&msg.buf[i], buf, count); + msg.len = i + count; + break; + } + + /* + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + write_time = jiffies; + + switch (port_data->use_smbus) { + case I2C_SMBUS_I2C_BLOCK_DATA: + status = i2c_smbus_write_i2c_block_data(client, + offset, count, buf); + if (status == 0) + status = count; + break; + case I2C_SMBUS_WORD_DATA: + if (count == 2) { + status = i2c_smbus_write_word_data(client, + offset, (u16)((buf[0])|(buf[1] << 8))); + } else { + /* count = 1 */ + status = i2c_smbus_write_byte_data(client, + offset, buf[0]); + } + if (status == 0) + status = count; + break; + case I2C_SMBUS_BYTE_DATA: + status = i2c_smbus_write_byte_data(client, offset, + buf[0]); + if (status == 0) + status = count; + break; + default: + status = i2c_transfer(client->adapter, &msg, 1); + if (status == 1) + status = count; + break; + } + + dev_dbg(&client->dev, "eeprom write %zu@%d --> %ld (%lu)\n", + count, offset, (long int) status, jiffies); + + if (status == count) + return count; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(write_time, timeout)); + + return -ETIMEDOUT; +} + + +static ssize_t sff_8436_eeprom_update_client(struct sfp_port_data *port_data, + char *buf, loff_t off, + size_t count, qsfp_opcode_e opcode) +{ + struct i2c_client *client; + ssize_t retval = 0; + u8 page = 0; + loff_t phy_offset = off; + int ret = 0; + + page = sff_8436_translate_offset(port_data, &phy_offset, &client); + + dev_dbg(&client->dev, + "sff_8436_eeprom_update_client off %lld page:%d phy_offset:%lld, count:%ld, opcode:%d\n", + off, page, phy_offset, (long int) count, opcode); + if (page > 0) { + ret = sff_8436_eeprom_write(port_data, client, &page, + SFF_8436_PAGE_SELECT_REG, 1); + if (ret < 0) { + dev_dbg(&client->dev, + "Write page register for page %d failed ret:%d!\n", + page, ret); + return ret; + } + } + + while (count) { + ssize_t status; + + if (opcode == QSFP_READ_OP) { + status = sff_8436_eeprom_read(port_data, client, + buf, phy_offset, count); + } else { + status = sff_8436_eeprom_write(port_data, client, + buf, phy_offset, count); + } + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + phy_offset += status; + count -= status; + retval += status; + } + + + if (page > 0) { + /* return the page register to page 0 (why?) */ + page = 0; + ret = sff_8436_eeprom_write(port_data, client, &page, + SFF_8436_PAGE_SELECT_REG, 1); + if (ret < 0) { + dev_err(&client->dev, + "Restore page register to page %d failed ret:%d!\n", + page, ret); + return ret; + } + } + return retval; +} + + +/* + * Figure out if this access is within the range of supported pages. + * Note this is called on every access because we don't know if the + * module has been replaced since the last call. + * If/when modules support more pages, this is the routine to update + * to validate and allow access to additional pages. + * + * Returns updated len for this access: + * - entire access is legal, original len is returned. + * - access begins legal but is too long, len is truncated to fit. + * - initial offset exceeds supported pages, return -EINVAL + */ +static ssize_t sff_8436_page_legal(struct sfp_port_data *port_data, + loff_t off, size_t len) +{ + struct i2c_client *client = port_data->client; + u8 regval; + int status; + size_t maxlen; + + if (off < 0) return -EINVAL; + if (port_data->driver_type == DRIVER_TYPE_SFP_MSA) { + /* SFP case */ + /* if no pages needed, we're good */ + if ((off + len) <= SFF_8472_EEPROM_UNPAGED_SIZE) return len; + /* if offset exceeds possible pages, we're not good */ + if (off >= SFF_8472_EEPROM_SIZE) return -EINVAL; + /* in between, are pages supported? */ + status = sff_8436_eeprom_read(port_data, client, ®val, + SFF_8472_PAGEABLE_REG, 1); + if (status < 0) return status; /* error out (no module?) */ + if (regval & SFF_8472_PAGEABLE) { + /* Pages supported, trim len to the end of pages */ + maxlen = SFF_8472_EEPROM_SIZE - off; + } else { + /* pages not supported, trim len to unpaged size */ + maxlen = SFF_8472_EEPROM_UNPAGED_SIZE - off; + } + len = (len > maxlen) ? maxlen : len; + dev_dbg(&client->dev, + "page_legal, SFP, off %lld len %ld\n", + off, (long int) len); + } + else if (port_data->driver_type == DRIVER_TYPE_QSFP || + port_data->driver_type == DRIVER_TYPE_XFP) { + /* QSFP case */ + /* if no pages needed, we're good */ + if ((off + len) <= SFF_8436_EEPROM_UNPAGED_SIZE) return len; + /* if offset exceeds possible pages, we're not good */ + if (off >= SFF_8436_EEPROM_SIZE) return -EINVAL; + /* in between, are pages supported? */ + status = sff_8436_eeprom_read(port_data, client, ®val, + SFF_8436_PAGEABLE_REG, 1); + if (status < 0) return status; /* error out (no module?) */ + if (regval & SFF_8436_NOT_PAGEABLE) { + /* pages not supported, trim len to unpaged size */ + maxlen = SFF_8436_EEPROM_UNPAGED_SIZE - off; + } else { + /* Pages supported, trim len to the end of pages */ + maxlen = SFF_8436_EEPROM_SIZE - off; + } + len = (len > maxlen) ? maxlen : len; + dev_dbg(&client->dev, + "page_legal, QSFP, off %lld len %ld\n", + off, (long int) len); + } + else { + return -EINVAL; + } + return len; +} + + +static ssize_t sfp_port_read_write(struct sfp_port_data *port_data, + char *buf, loff_t off, size_t len, qsfp_opcode_e opcode) +{ + struct i2c_client *client = port_data->client; + int chunk; + int status = 0; + ssize_t retval; + size_t pending_len = 0, chunk_len = 0; + loff_t chunk_offset = 0, chunk_start_offset = 0; + + if (unlikely(!len)) + return len; + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&port_data->update_lock); + + /* + * Confirm this access fits within the device suppored addr range + */ + len = sff_8436_page_legal(port_data, off, len); + if (len < 0) { + status = len; + goto err; + } + + /* + * For each (128 byte) chunk involved in this request, issue a + * separate call to sff_eeprom_update_client(), to + * ensure that each access recalculates the client/page + * and writes the page register as needed. + * Note that chunk to page mapping is confusing, is different for + * QSFP and SFP, and never needs to be done. Don't try! + */ + pending_len = len; /* amount remaining to transfer */ + retval = 0; /* amount transferred */ + for (chunk = off >> 7; chunk <= (off + len - 1) >> 7; chunk++) { + + /* + * Compute the offset and number of bytes to be read/write + * + * 1. start at offset 0 (within the chunk), and read/write + * the entire chunk + * 2. start at offset 0 (within the chunk) and read/write less + * than entire chunk + * 3. start at an offset not equal to 0 and read/write the rest + * of the chunk + * 4. start at an offset not equal to 0 and read/write less than + * (end of chunk - offset) + */ + chunk_start_offset = chunk * SFF_8436_PAGE_SIZE; + + if (chunk_start_offset < off) { + chunk_offset = off; + if ((off + pending_len) < (chunk_start_offset + + SFF_8436_PAGE_SIZE)) + chunk_len = pending_len; + else + chunk_len = (chunk+1)*SFF_8436_PAGE_SIZE - off;/*SFF_8436_PAGE_SIZE - off;*/ + } else { + chunk_offset = chunk_start_offset; + if (pending_len > SFF_8436_PAGE_SIZE) + chunk_len = SFF_8436_PAGE_SIZE; + else + chunk_len = pending_len; + } + + dev_dbg(&client->dev, + "sff_r/w: off %lld, len %ld, chunk_start_offset %lld, chunk_offset %lld, chunk_len %ld, pending_len %ld\n", + off, (long int) len, chunk_start_offset, chunk_offset, + (long int) chunk_len, (long int) pending_len); + + /* + * note: chunk_offset is from the start of the EEPROM, + * not the start of the chunk + */ + status = sff_8436_eeprom_update_client(port_data, buf, + chunk_offset, chunk_len, opcode); + if (status != chunk_len) { + /* This is another 'no device present' path */ + dev_dbg(&client->dev, + "sff_8436_update_client for chunk %d chunk_offset %lld chunk_len %ld failed %d!\n", + chunk, chunk_offset, (long int) chunk_len, status); + goto err; + } + buf += status; + pending_len -= status; + retval += status; + } + mutex_unlock(&port_data->update_lock); + + return retval; + +err: + mutex_unlock(&port_data->update_lock); + + return status; +} + +#else +static ssize_t sfp_port_read(struct sfp_port_data *data, + char *buf, loff_t off, size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) { + DEBUG_PRINT("Count = 0, return"); + return count; + } + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&data->update_lock); + + while (count) { + ssize_t status; + + status = sfp_eeprom_read(data->client, off, buf, count); + if (status <= 0) { + if (retval == 0) { + retval = status; + } + break; + } + + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&data->update_lock); + return retval; + +} +#endif + +static ssize_t sfp_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + int present; + struct sfp_port_data *data; + DEBUG_PRINT("offset = (%d), count = (%d)", off, count); + + data = dev_get_drvdata(container_of(kobj, struct device, kobj)); + present = sfp_is_port_present(data->client, data->port); + if (IS_ERR_VALUE(present)) { + return present; + } + + if (present == 0) { + /* port is not present */ + return -ENODEV; + } + +#if (MULTIPAGE_SUPPORT == 1) + return sfp_port_read_write(data, buf, off, count, QSFP_READ_OP); +#else + return sfp_port_read(data, buf, off, count); +#endif +} + +#if (MULTIPAGE_SUPPORT == 1) +static int sfp_sysfs_eeprom_init(struct kobject *kobj, struct bin_attribute *eeprom, size_t size) +#else +static int sfp_sysfs_eeprom_init(struct kobject *kobj, struct bin_attribute *eeprom) +#endif +{ + int err; + + sysfs_bin_attr_init(eeprom); + eeprom->attr.name = EEPROM_NAME; + eeprom->attr.mode = S_IWUSR | S_IRUGO; + eeprom->read = sfp_bin_read; + eeprom->write = sfp_bin_write; +#if (MULTIPAGE_SUPPORT == 1) + eeprom->size = size; +#else + eeprom->size = EEPROM_SIZE; +#endif + + /* Create eeprom file */ + err = sysfs_create_bin_file(kobj, eeprom); + if (err) { + return err; + } + + return 0; +} + +static int sfp_sysfs_eeprom_cleanup(struct kobject *kobj, struct bin_attribute *eeprom) +{ + sysfs_remove_bin_file(kobj, eeprom); + return 0; +} + + +#if (MULTIPAGE_SUPPORT == 0) +static int sfp_i2c_check_functionality(struct i2c_client *client) +{ +#if USE_I2C_BLOCK_READ + return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK); +#else + return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA); +#endif +} +#endif + + +static const struct attribute_group qsfp_group = { + .attrs = qsfp_attributes, +}; + +static int qsfp_probe(struct i2c_client *client, const struct i2c_device_id *dev_id, + struct qsfp_data **data) +{ + int status; + struct qsfp_data *qsfp; + +#if (MULTIPAGE_SUPPORT == 0) + if (!sfp_i2c_check_functionality(client)) { + status = -EIO; + goto exit; + } +#endif + + qsfp = kzalloc(sizeof(struct qsfp_data), GFP_KERNEL); + if (!qsfp) { + status = -ENOMEM; + goto exit; + } + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &qsfp_group); + if (status) { + goto exit_free; + } + + /* init eeprom */ +#if (MULTIPAGE_SUPPORT == 1) + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &qsfp->eeprom.bin, SFF_8436_EEPROM_SIZE); +#else + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &qsfp->eeprom.bin); +#endif + if (status) { + goto exit_remove; + } + + *data = qsfp; + dev_info(&client->dev, "qsfp '%s'\n", client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &qsfp_group); +exit_free: + kfree(qsfp); +exit: + + return status; +} + +/* Platform dependent +++ */ +static int sfp_device_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int ret = 0; + struct sfp_port_data *data = NULL; + + if (client->addr != SFP_EEPROM_A0_I2C_ADDR) { + return -ENODEV; + } + + if (dev_id->driver_data < as7816_64x_port1 || dev_id->driver_data > as7816_64x_port64) { + return -ENXIO; + } + + data = kzalloc(sizeof(struct sfp_port_data), GFP_KERNEL); + if (!data) { + return -ENOMEM; + } + +#if (MULTIPAGE_SUPPORT == 1) + data->use_smbus = 0; + + /* Use I2C operations unless we're stuck with SMBus extensions. */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + data->use_smbus = I2C_SMBUS_I2C_BLOCK_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) { + data->use_smbus = I2C_SMBUS_WORD_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + data->use_smbus = I2C_SMBUS_BYTE_DATA; + } else { + ret = -EPFNOSUPPORT; + goto exit_kfree; + } + } + + if (!data->use_smbus || + (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) || + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_WORD_DATA) || + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + /* + * NOTE: AN-2079 + * Finisar recommends that the host implement 1 byte writes + * only since this module only supports 32 byte page boundaries. + * 2 byte writes are acceptable for PE and Vout changes per + * Application Note AN-2071. + */ + unsigned write_max = 1; + + if (write_max > io_limit) + write_max = io_limit; + if (data->use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) + write_max = I2C_SMBUS_BLOCK_MAX; + data->write_max = write_max; + + /* buffer (data + address at the beginning) */ + data->writebuf = kmalloc(write_max + 2, GFP_KERNEL); + if (!data->writebuf) { + ret = -ENOMEM; + goto exit_kfree; + } + } else { + dev_warn(&client->dev, + "cannot write due to controller restrictions."); + } + + if (data->use_smbus == I2C_SMBUS_WORD_DATA || + data->use_smbus == I2C_SMBUS_BYTE_DATA) { + dev_notice(&client->dev, "Falling back to %s reads, " + "performance will suffer\n", data->use_smbus == + I2C_SMBUS_WORD_DATA ? "word" : "byte"); + } +#endif + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->port = dev_id->driver_data; + data->client = client; + data->driver_type = DRIVER_TYPE_QSFP; + + ret = qsfp_probe(client, dev_id, &data->qsfp); + if (ret < 0) { + goto exit_kfree_buf; + } + + return ret; + +exit_kfree_buf: +#if (MULTIPAGE_SUPPORT == 1) + if (data->writebuf) kfree(data->writebuf); +#endif + +exit_kfree: + kfree(data); + return ret; +} +/* Platform dependent --- */ + +static int qsfp_remove(struct i2c_client *client, struct qsfp_data *data) +{ + sfp_sysfs_eeprom_cleanup(&client->dev.kobj, &data->eeprom.bin); + sysfs_remove_group(&client->dev.kobj, &qsfp_group); + kfree(data); + return 0; +} + +static int sfp_device_remove(struct i2c_client *client) +{ + int ret = 0; + struct sfp_port_data *data = i2c_get_clientdata(client); + + if (data->driver_type == DRIVER_TYPE_QSFP) { + ret = qsfp_remove(client, data->qsfp); + } + + kfree(data); + return ret; +} + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +static struct i2c_driver sfp_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = sfp_device_probe, + .remove = sfp_device_remove, + .id_table = sfp_device_id, + .address_list = normal_i2c, +}; + +static int __init sfp_init(void) +{ + return i2c_add_driver(&sfp_driver); +} + +static void __exit sfp_exit(void) +{ + i2c_del_driver(&sfp_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton as7816_64x_sfp driver"); +MODULE_LICENSE("GPL"); + +module_init(sfp_init); +module_exit(sfp_exit); + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/ym2651y.c new file mode 120000 index 000000000000..f4d67640ccc3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/modules/ym2651y.c @@ -0,0 +1 @@ +../../common/modules/ym2651y.c \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/service/as7816-platform-init.service b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/service/as7816-platform-init.service new file mode 100755 index 000000000000..c1ba30092f1d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/service/as7816-platform-init.service @@ -0,0 +1,13 @@ +[Unit] +Description=Accton AS7816-64X Platform initialization service +Before=pmon.service +DefaultDependencies=no + +[Service] +Type=oneshot +ExecStart=/usr/local/bin/accton_as7816_util.py install +ExecStop=/usr/local/bin/accton_as7816_util.py clean +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/setup.py b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/setup.py new file mode 100755 index 000000000000..6633b9438b86 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/setup.py @@ -0,0 +1,16 @@ +#!/usr/bin/env python + +import os +import sys +from setuptools import setup +os.listdir + +setup( + name='as7816_64x', + version='1.0', + description='Module to initialize Accton AS7816-64X platforms', + + packages=['as7816_64x'], + package_dir={'as7816_64x': 'as7816-64x/classes'}, +) + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/utils/README b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/utils/README new file mode 100755 index 000000000000..0b9fc1633999 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/utils/README @@ -0,0 +1,60 @@ +Copyright (C) 2016 Accton Networks, Inc. + +This program is free software: you can redistribute it and/or modify +It under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +See the GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + +To initialize the system, run "accton_as7712_util.py install". +To clean up the drivers & devices, run "accton_as7712_util.py clean". +To dump information of sensors, run "accton_as7712_util.py show". +To dump SFP EEPROM, run "accton_as7712_util.py sff". +To set fan speed, run "accton_as7712_util.py set fan". +To enable/disable SFP emission, run "accton_as7712_util.py set sfp". +To set system LEDs' color, run "accton_as7712_util.py set led" +For more information, run "accton_as7712_util.py --help". + +==================================================================== +Besides applying accton_as7712_util.py to access peripherals, you can +access peripherals by sysfs nodes directly after the installation is run. + +LED controls can be found under /sys/class/leds. The sysfs interface +color mappings are as follows: +Brightness: + 0 => off + 1 => green + 2 => amber + 3 => red + 4 => blue + +There are 5 system LEDs, loc, diag, fan, ps1, and ps2. +They are lit automatically by CPLD, but the loc and diag. +The loc led has only 1 color, blue. +The diag one has 3 colors: red, amber, and green. + +Fan controls can be found in /sys/bus/i2c/devices/2-0066. +There are 12 fans inside 6 fan modules. +All fans share 1 duty setting, ranged from 0~100. + +Three temperature sensors are controlled by the lm75 kernel modules. +They should already be visible under /sys/bus/i2c/drivers/lm75/. + +Two power supplies are controlled by the CPLD. +Here provide their status under +/sys/bus/i2c/devices/10-0050 and /sys/bus/i2c/devices/11-0053. + +There are 32 QSFP+ modules are equipped. +Apply "accton_as7712_util.py show" to get their status. +Apply "accton_as7712_util.py set sfp" to turn on/off light transmission. +Apply "accton_as7712_util.py sff" to dump EEPROM information. +Before operating on that QSFP+, please make sure it is well plugged. +Otherwise, operation is going to fail. + diff --git a/platform/broadcom/sonic-platform-modules-accton/as7816-64x/utils/accton_as7816_util.py b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/utils/accton_as7816_util.py new file mode 100755 index 000000000000..44c4486a2d59 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/as7816-64x/utils/accton_as7816_util.py @@ -0,0 +1,523 @@ +#!/usr/bin/env python +# +# Copyright (C) 2016 Accton Networks, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes + show : show all systen status + sff : dump SFP eeprom + set : change board setting with fan|led|sfp +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + + + + +PROJECT_NAME = 'as7816_64x' +version = '0.1.0' +verbose = False +DEBUG = False +args = [] +ALL_DEVICE = {} +DEVICE_NO = {'led':5, 'fan':4,'thermal':6, 'psu':2, 'sfp':64} +FORCE = 0 +#logging.basicConfig(filename= PROJECT_NAME+'.log', filemode='w',level=logging.DEBUG) +#logging.basicConfig(level=logging.INFO) + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + do_install() + elif arg == 'clean': + do_uninstall() + elif arg == 'show': + device_traversal() + elif arg == 'sff': + if len(args)!=2: + show_eeprom_help() + elif int(args[1]) ==0 or int(args[1]) > DEVICE_NO['sfp']: + show_eeprom_help() + else: + show_eeprom(args[1]) + return + elif arg == 'set': + if len(args)<3: + show_set_help() + else: + set_device(args[1:]) + return + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_set_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print cmd +" [led|sfp|fan]" + print " use \""+ cmd + " led 0-4 \" to set led color" + print " use \""+ cmd + " fan 0-100\" to set fan duty percetage" + print " use \""+ cmd + " sfp 1-32 {0|1}\" to set sfp# tx_disable" + sys.exit(0) + +def show_eeprom_help(): + cmd = sys.argv[0].split("/")[-1]+ " " + args[0] + print " use \""+ cmd + " 1-32 \" to dump sfp# eeprom" + sys.exit(0) + +def my_log(txt): + if DEBUG == True: + print "[ROY]"+txt + return + +def log_os_system(cmd, show): + logging.info('Run :'+cmd) + status, output = commands.getstatusoutput(cmd) + my_log (cmd +"with result:" + str(status)) + my_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +def driver_check(): + ret, lsmod = log_os_system("lsmod| grep accton", 0) + logging.info('mods:'+lsmod) + if len(lsmod) ==0: + return False + return True + + + +kos = [ +'modprobe i2c_dev', +'modprobe i2c_mux_pca954x', +'modprobe accton_i2c_cpld' , +'modprobe ym2651y' , +'modprobe x86-64-accton-as7816-64x-fan' , +'modprobe x86-64-accton-as7816-64x-sfp' , +'modprobe x86-64-accton-as7816-64x-leds' , +'modprobe x86-64-accton-as7816-64x-psu' ] + +def driver_install(): + global FORCE + status, output = log_os_system("depmod", 1) + for i in range(0,len(kos)): + status, output = log_os_system(kos[i], 1) + if status: + if FORCE == 0: + return status + return 0 + +def driver_uninstall(): + global FORCE + for i in range(0,len(kos)): + rm = kos[-(i+1)].replace("modprobe", "modprobe -rq") + rm = rm.replace("insmod", "rmmod") + status, output = log_os_system(rm, 1) + if status: + if FORCE == 0: + return status + return 0 + +led_prefix ='/sys/class/leds/'+PROJECT_NAME+'_led::' +hwmon_types = {'led': ['diag','fan','loc','psu1','psu2']} +hwmon_nodes = {'led': ['brightness'] } +hwmon_prefix ={'led': led_prefix} + +i2c_prefix = '/sys/bus/i2c/devices/' +i2c_bus = {'fan': ['17-0068'] , + 'thermal': ['18-0048','18-0049', '18-004a' , '18-004b', '17-004d', '17-004e'] , + 'psu': ['10-0053','9-0050'], + 'sfp': ['-0050']} +i2c_nodes = {'fan': ['present', 'front_speed_rpm', 'rear_speed_rpm'] , + 'thermal': ['hwmon/hwmon*/temp1_input'] , + 'psu': ['psu_present ', 'psu_power_good'] , + 'sfp': ['sfp_is_present ', 'sfp_tx_disable']} + +sfp_map = [37,38,39,40,42,41,44,43,33,34,35,36,45,46,47,48,49,50,51,52, + 61,62,63,64,53,54,55,56,57,58,59,60,69,70,71,72,77,78,79,80,65, + 66,67,68,73,74,75,76,85,86,87,88,31,32,29,30,81,82,83,84,25,26, + 27,28] + +mknod =[ +'echo pca9548 0x77 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-1/new_device', +'echo pca9548 0x70 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x73 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x74 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x75 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo pca9548 0x76 > /sys/bus/i2c/devices/i2c-2/new_device', +'echo 24c02 0x56 > /sys/bus/i2c/devices/i2c-0/new_device', +'echo as7816_64x_psu1 0x53 > /sys/bus/i2c/devices/i2c-10/new_device', +'echo ym2851 0x5b > /sys/bus/i2c/devices/i2c-10/new_device', +'echo as7816_64x_psu2 0x50 > /sys/bus/i2c/devices/i2c-9/new_device', +'echo ym2851 0x58 > /sys/bus/i2c/devices/i2c-9/new_device', +'echo as7816_64x_fan 0x68 > /sys/bus/i2c/devices/i2c-17/new_device', +'echo lm75 0x48 > /sys/bus/i2c/devices/i2c-18/new_device', +'echo lm75 0x49 > /sys/bus/i2c/devices/i2c-18/new_device', +'echo lm75 0x4a > /sys/bus/i2c/devices/i2c-18/new_device', +'echo lm75 0x4b > /sys/bus/i2c/devices/i2c-18/new_device', +'echo lm75 0x4d > /sys/bus/i2c/devices/i2c-17/new_device', +'echo lm75 0x4e > /sys/bus/i2c/devices/i2c-17/new_device', +'echo cpld_as7816 0x60 > /sys/bus/i2c/devices/i2c-19/new_device', +'echo cpld_plain 0x62 > /sys/bus/i2c/devices/i2c-20/new_device', +'echo cpld_plain 0x64 > /sys/bus/i2c/devices/i2c-21/new_device', +'echo cpld_plain 0x66 > /sys/bus/i2c/devices/i2c-22/new_device'] + +def i2c_order_check(): + return 0 + +def device_install(): + global FORCE + + for i in range(0,len(mknod)): + #for pca954x need times to built new i2c buses + if mknod[i].find('pca954') != -1: + time.sleep(1) + + status, output = log_os_system(mknod[i], 1) + if status: + print output + if FORCE == 0: + return status + + for i in range(0,len(sfp_map)): + status, output =log_os_system("echo as7816_64x_port"+str(i+1)+" 0x50 > /sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + return + +def device_uninstall(): + global FORCE + + status, output =log_os_system("ls /sys/bus/i2c/devices/1-0076", 0) + + for i in range(0,len(sfp_map)): + target = "/sys/bus/i2c/devices/i2c-"+str(sfp_map[i])+"/delete_device" + status, output =log_os_system("echo 0x50 > "+ target, 1) + if status: + print output + if FORCE == 0: + return status + + nodelist = mknod + + for i in range(len(nodelist)): + target = nodelist[-(i+1)] + temp = target.split() + del temp[1] + temp[-1] = temp[-1].replace('new_device', 'delete_device') + status, output = log_os_system(" ".join(temp), 1) + if status: + print output + if FORCE == 0: + return status + + return + +def system_ready(): + if driver_check() == False: + return False + if not device_exist(): + return False + return True + +def do_install(): + print "Checking system...." + if driver_check() == False: + print "No driver, installing...." + status = driver_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" drivers detected...." + if not device_exist(): + print "No device, installing...." + status = device_install() + if status: + if FORCE == 0: + return status + else: + print PROJECT_NAME.upper()+" devices detected...." + return + +def do_uninstall(): + print "Checking system...." + if not device_exist(): + print PROJECT_NAME.upper() +" has no device installed...." + else: + print "Removing device...." + status = device_uninstall() + if status: + if FORCE == 0: + return status + + if driver_check()== False : + print PROJECT_NAME.upper() +" has no driver installed...." + else: + print "Removing installed driver...." + status = driver_uninstall() + if status: + if FORCE == 0: + return status + + return + +def devices_info(): + global DEVICE_NO + global ALL_DEVICE + global i2c_bus, hwmon_types + for key in DEVICE_NO: + ALL_DEVICE[key]= {} + for i in range(0,DEVICE_NO[key]): + ALL_DEVICE[key][key+str(i+1)] = [] + + for key in i2c_bus: + buses = i2c_bus[key] + nodes = i2c_nodes[key] + for i in range(0,len(buses)): + for j in range(0,len(nodes)): + if 'fan' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ buses[i]+"/fan"+str(k+1)+"_"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + elif 'sfp' == key: + for k in range(0,DEVICE_NO[key]): + node = key+str(k+1) + path = i2c_prefix+ str(sfp_map[k])+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + else: + node = key+str(i+1) + path = i2c_prefix+ buses[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][node].append(path) + + for key in hwmon_types: + itypes = hwmon_types[key] + nodes = hwmon_nodes[key] + for i in range(0,len(itypes)): + for j in range(0,len(nodes)): + node = key+"_"+itypes[i] + path = hwmon_prefix[key]+ itypes[i]+"/"+ nodes[j] + my_log(node+": "+ path) + ALL_DEVICE[key][ key+str(i+1)].append(path) + + #show dict all in the order + if DEBUG == True: + for i in sorted(ALL_DEVICE.keys()): + print(i+": ") + for j in sorted(ALL_DEVICE[i].keys()): + print(" "+j) + for k in (ALL_DEVICE[i][j]): + print(" "+" "+k) + return + +def show_eeprom(index): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + node = ALL_DEVICE['sfp'] ['sfp'+str(index)][0] + node = node.replace(node.split("/")[-1], 'sfp_eeprom') + # check if got hexdump command in current environment + ret, log = log_os_system("which hexdump", 0) + ret, log2 = log_os_system("which busybox hexdump", 0) + if len(log): + hex_cmd = 'hexdump' + elif len(log2): + hex_cmd = ' busybox hexdump' + else: + log = 'Failed : no hexdump cmd!!' + logging.info(log) + print log + return 1 + + print node + ":" + ret, log = log_os_system("cat "+node+"| "+hex_cmd+" -C", 1) + if ret==0: + print log + else: + print "**********device no found**********" + return + +def set_device(args): + global DEVICE_NO + global ALL_DEVICE + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + + if args[0]=='led': + if int(args[1])>4: + show_set_help() + return + #print ALL_DEVICE['led'] + for i in range(0,len(ALL_DEVICE['led'])): + for k in (ALL_DEVICE['led']['led'+str(i+1)]): + ret, log = log_os_system("echo "+args[1]+" >"+k, 1) + if ret: + return ret + elif args[0]=='fan': + if int(args[1])>100: + show_set_help() + return + #print ALL_DEVICE['fan'] + #fan1~6 is all fine, all fan share same setting + node = ALL_DEVICE['fan'] ['fan1'][0] + node = node.replace(node.split("/")[-1], 'fan_duty_cycle_percentage') + ret, log = log_os_system("cat "+ node, 1) + if ret==0: + print ("Previous fan duty: " + log.strip() +"%") + ret, log = log_os_system("echo "+args[1]+" >"+node, 1) + if ret==0: + print ("Current fan duty: " + args[1] +"%") + return ret + elif args[0]=='sfp': + if int(args[1])> DEVICE_NO[args[0]] or int(args[1])==0: + show_set_help() + return + if len(args)<2: + show_set_help() + return + + if int(args[2])>1: + show_set_help() + return + + #print ALL_DEVICE[args[0]] + for i in range(0,len(ALL_DEVICE[args[0]])): + for j in ALL_DEVICE[args[0]][args[0]+str(args[1])]: + if j.find('tx_disable')!= -1: + ret, log = log_os_system("echo "+args[2]+" >"+ j, 1) + if ret: + return ret + + return + +#get digits inside a string. +#Ex: 31 for "sfp31" +def get_value(input): + digit = re.findall('\d+', input) + return int(digit[0]) + +def device_traversal(): + if system_ready()==False: + print("System's not ready.") + print("Please install first!") + return + + if len(ALL_DEVICE)==0: + devices_info() + for i in sorted(ALL_DEVICE.keys()): + print("============================================") + print(i.upper()+": ") + print("============================================") + + for j in sorted(ALL_DEVICE[i].keys(), key=get_value): + print " "+j+":", + for k in (ALL_DEVICE[i][j]): + ret, log = log_os_system("cat "+k, 0) + func = k.split("/")[-1].strip() + func = re.sub(j+'_','',func,1) + func = re.sub(i.lower()+'_','',func,1) + if ret==0: + print func+"="+log+" ", + else: + print func+"="+"X"+" ", + print + print("----------------------------------------------------------------") + + + print + return + +def device_exist(): + ret1, log = log_os_system("ls "+i2c_prefix+"*0076", 0) + ret2, log = log_os_system("ls "+i2c_prefix+"i2c-2", 0) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() diff --git a/platform/broadcom/sonic-platform-modules-accton/common/modules/accton_i2c_cpld.c b/platform/broadcom/sonic-platform-modules-accton/common/modules/accton_i2c_cpld.c new file mode 100644 index 000000000000..aae4e5538b63 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/common/modules/accton_i2c_cpld.c @@ -0,0 +1,887 @@ +/* + * A hwmon driver for the accton_i2c_cpld + * + * Copyright (C) 2013 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define MAX_PORT_NUM 64 +#define I2C_RW_RETRY_COUNT 10 +#define I2C_RW_RETRY_INTERVAL 60 /* ms */ + +#define I2C_ADDR_CPLD1 0x60 +#define I2C_ADDR_CPLD2 0x62 +#define I2C_ADDR_CPLD3 0x64 +#define CPLD_ADDRS {I2C_ADDR_CPLD1, I2C_ADDR_CPLD2, I2C_ADDR_CPLD3} + + +/* + * Number of additional attribute pointers to allocate + * with each call to krealloc + */ +#define ATTR_ALLOC_SIZE 1 /*For last attribute which is NUll.*/ + +#define NAME_SIZE 24 +#define MAX_RESP_LENGTH 48 + +typedef ssize_t (*show_func)( struct device *dev, + struct device_attribute *attr, + char *buf); +typedef ssize_t (*store_func)(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count); + +enum models { + AS7712_32X, + AS7716_32X, + AS7816_64X, + AS7312_54X, + PLAIN_CPLD, /*No attribute but add i2c addr to the list.*/ + NUM_MODEL +}; + +enum sfp_func { + HAS_SFP = 1<<0 , + HAS_QSFP = 1<<1 , +}; + +enum common_attrs { + CMN_VERSION, + CMN_ACCESS, + CMN_PRESENT_ALL, + NUM_COMMON_ATTR +}; + +enum sfp_attrs { + SFP_PRESENT, + SFP_RESET, + SFP_LP_MODE, + NUM_SFP_ATTR +}; + +struct cpld_sensor { + struct cpld_sensor *next; + char name[NAME_SIZE+1]; /* sysfs sensor name */ + struct device_attribute attribute; + bool update; /* runtime sensor update needed */ + int data; /* Sensor data. Negative if there was a read error */ + + u8 reg; /* register */ + u8 mask; /* bit mask */ + bool invert; /* inverted value*/ + +}; + +#define to_cpld_sensor(_attr) \ + container_of(_attr, struct cpld_sensor, attribute) + +struct cpld_data { + struct device *dev; + struct device *hwmon_dev; + + int num_attributes; + struct attribute_group group; + + enum models model; + struct cpld_sensor *sensors; + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + int attr_index; + u16 sfp_num; + u8 sfp_types; + struct model_attrs *cmn_attr; +}; + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + + +struct base_attrs { + const char *name; + umode_t mode; + show_func get; + store_func set; +}; + +struct attrs { + int reg; + bool invert; + struct base_attrs *base; +}; + +struct model_attrs { + struct attrs **cmn; + struct attrs **portly; +}; + + +static ssize_t show_bit(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t show_presnet_all(struct device *dev, + struct device_attribute *devattr, char *buf); +static ssize_t set_1bit(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t set_byte(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); + +int accton_i2c_cpld_read(u8 cpld_addr, u8 reg); +int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value); + + +struct base_attrs common_attrs[NUM_COMMON_ATTR] = +{ + [CMN_VERSION] = {"version", S_IRUGO, show_bit, NULL}, + [CMN_ACCESS] = {"access", S_IWUSR, NULL, set_byte}, + [CMN_PRESENT_ALL] = {"module_present_all", S_IRUGO, show_presnet_all, NULL}, +}; + +struct attrs as7712_common[] = { + [CMN_VERSION] = {0x01, false, &common_attrs[CMN_VERSION]}, + [CMN_ACCESS] = {0x00, false, &common_attrs[CMN_ACCESS]}, + [CMN_PRESENT_ALL] = {0x30, false, &common_attrs[CMN_PRESENT_ALL]}, +}; +struct attrs as7816_common[] = { + [CMN_VERSION] = {0x01, false, &common_attrs[CMN_VERSION]}, + [CMN_ACCESS] = {0x00, false, &common_attrs[CMN_ACCESS]}, + [CMN_PRESENT_ALL] = {0x30, false, &common_attrs[CMN_PRESENT_ALL]}, +}; +struct attrs as7312_common[] = { + [CMN_VERSION] = {0x01, false, &common_attrs[CMN_VERSION]}, + [CMN_ACCESS] = {0x00, false, &common_attrs[CMN_ACCESS]}, + [CMN_PRESENT_ALL] = {-1, false, &common_attrs[CMN_PRESENT_ALL]}, +}; +struct attrs plain_common[] = { + [CMN_VERSION] = {0x01, false, &common_attrs[CMN_VERSION]}, +}; + +struct base_attrs portly_attrs[] = +{ + [SFP_PRESENT] = {"module_present", S_IRUGO, show_bit, NULL}, + [SFP_RESET] = {"module_reset", S_IRUGO|S_IWUGO, show_bit, set_1bit}, +}; + +struct attrs as7712_port[] = { + {0x30, true, &portly_attrs[SFP_PRESENT]}, + {0x04, true, &portly_attrs[SFP_RESET]}, +}; + +struct attrs as7816_port[] = { + {0x70, true, &portly_attrs[SFP_PRESENT]}, + {0x40, true, &portly_attrs[SFP_RESET]}, +}; + +struct attrs *as7712_cmn_list[] = { + &as7712_common[CMN_VERSION], + &as7712_common[CMN_ACCESS], + &as7712_common[CMN_PRESENT_ALL], + NULL +}; + +struct attrs *as7816_cmn_list[] = { + &as7816_common[CMN_VERSION], + &as7816_common[CMN_ACCESS], + &as7816_common[CMN_PRESENT_ALL], + NULL +}; + +struct attrs *as7312_cmn_list[] = { + &as7312_common[CMN_VERSION], + &as7312_common[CMN_ACCESS], + &as7312_common[CMN_PRESENT_ALL], + NULL +}; + +struct attrs *plain_cmn_list[] = { + &plain_common[CMN_VERSION], + NULL +}; + +struct attrs *as7712_port_list[] = { + &as7712_port[SFP_PRESENT], + &as7712_port[SFP_RESET], + NULL +}; +struct attrs *as7816_port_list[] = { + &as7816_port[SFP_PRESENT], + &as7816_port[SFP_RESET], + NULL +}; + +struct model_attrs models_attr[NUM_MODEL] = { + {.cmn = as7712_cmn_list, .portly=as7712_port_list}, + {.cmn = as7712_cmn_list, .portly=as7712_port_list}, /*7716's as 7712*/ + {.cmn = as7816_cmn_list, .portly=as7816_port_list}, + {.cmn = as7312_cmn_list, .portly=as7816_port_list}, + {.cmn = plain_cmn_list, .portly=NULL}, +}; + +static LIST_HEAD(cpld_client_list); +static struct mutex list_lock; +/* Addresses scanned for accton_i2c_cpld + */ +static const unsigned short normal_i2c[] = { I2C_CLIENT_END }; + +static int get_sfp_spec(int model, u16 *num, u8 *types) +{ + switch (model) { + case AS7712_32X: + case AS7716_32X: + *num = 32; + *types = HAS_QSFP; + break; + case AS7816_64X: + *num = 64; + *types = HAS_QSFP; + break; + case AS7312_54X: + *num = 54; + *types = HAS_QSFP|HAS_SFP; + default: + *types = 0; + *num = 0; + break; + } + + return 0; +} + +static int get_present_reg(int model, u8 port, u8 *cpld_addr, u8 *reg, u8 *num) +{ + u8 cpld_address[] = CPLD_ADDRS; + + switch (model) { + case AS7312_54X: + if (port < 48) { + *cpld_addr = cpld_address[1 + port/24]; + *reg = 0x09 + (port%24)/8; + *num = 8; + } + else + { + *reg = 0x18; + *num = 4; + *cpld_addr = ( port < 52)? cpld_address[1]: cpld_address[2]; + } + break; + default: + return -EINVAL; + } +} + + +/*Assume the bits for ports are listed in-a-row.*/ +static int get_reg_bit(u8 reg_start, int port, + u8 *reg ,u8 *mask) +{ + *reg = reg_start + ((port)/8); + *mask = 1 << ((port)%8); + + return 0; +} + +static int cpld_write_internal( + struct i2c_client *client, u8 reg, u8 value) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_write_byte_data(client, reg, value); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + +static int cpld_read_internal(struct i2c_client *client, u8 reg) +{ + int status = 0, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + status = i2c_smbus_read_byte_data(client, reg); + if (unlikely(status < 0)) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + return status; +} + + +/*Turn a numberic array into string with " " between each element. + * e.g., {0x11, 0x33, 0xff, 0xf1} => "11 33 ff f1" + */ +static ssize_t array_stringify(char *buf, u8 *input, size_t size) { + + int i; + char t[MAX_RESP_LENGTH+1]; + + buf[0] = '\0'; + for (i = 0; i < size; i++) { + snprintf(t, MAX_RESP_LENGTH, "%x ", input[i]); + strncat(buf, t, MAX_RESP_LENGTH); + } + + if (strlen(buf) > 0) + buf[strlen(buf)-1] = '\0'; /*Remove tailing blank*/ + + return snprintf(buf, MAX_RESP_LENGTH, "%s\n", buf); +} + +static ssize_t show_presnet_all_distinct(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 i, value, reg; + u8 cpld_addr, num; + u8 _value[8]; + u64 *values = (u64 *)_value; + + values = 0; + mutex_lock(&data->update_lock); + while(i < data->sfp_num) + { + get_present_reg(data->model, i, &cpld_addr, ®, &num); + if(cpld_addr == client->addr) + value = cpld_read_internal(client, reg); + else + value = accton_i2c_cpld_read(cpld_addr, reg); + + if (unlikely(value < 0)) { + goto exit; + } + + *values |= (value&((1<<(num))-1)) << i; + i += num; + } + mutex_unlock(&data->update_lock); + + *values = cpu_to_le64(*values); + return array_stringify(buf, _value, i); +exit: + mutex_unlock(&data->update_lock); + return value; +} + +static ssize_t show_presnet_all(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + struct cpld_sensor *sensor = to_cpld_sensor(devattr); + u8 i, values[MAX_RESP_LENGTH/8]; + + if (sensor->reg < 0) { + return show_presnet_all_distinct(dev, devattr, buf); + } + + mutex_lock(&data->update_lock); + for (i = 0; i < ((data->sfp_num+7)/8); i++) { + values[i] = cpld_read_internal(client, sensor->reg + i); + if (unlikely(values[i] < 0)) { + goto exit; + } + } + mutex_unlock(&data->update_lock); + return array_stringify(buf, values, i); + +exit: + mutex_unlock(&data->update_lock); + return values[i]; +} + +static ssize_t show_bit(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int value; + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + struct cpld_sensor *sensor = to_cpld_sensor(devattr); + + mutex_lock(&data->update_lock); + value = cpld_read_internal(client, sensor->reg); + value = value & sensor->mask; + if (sensor->invert) + value = !value; + mutex_unlock(&data->update_lock); + + return snprintf(buf, PAGE_SIZE, "%x\n", value); +} + +static ssize_t set_1bit(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + long is_reset; + int value, status; + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + struct cpld_sensor *sensor = to_cpld_sensor(devattr); + u8 cpld_bit, reg; + + status = kstrtol(buf, 10, &is_reset); + if (status) { + return status; + } + reg = sensor->reg; + cpld_bit = sensor->mask; + mutex_lock(&data->update_lock); + value = cpld_read_internal(client, reg); + if (unlikely(status < 0)) { + goto exit; + } + + if (sensor->invert) + is_reset = !is_reset; + + if (is_reset) { + value |= cpld_bit; + } + else { + value &= ~cpld_bit; + } + + status = cpld_write_internal(client, reg, value); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static ssize_t set_byte(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + return access(dev, da, buf, count); +} + +static ssize_t access(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + int status; + u32 addr, val; + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + + if (sscanf(buf, "0x%x 0x%x", &addr, &val) != 2) { + return -EINVAL; + } + + if (addr > 0xFF || val > 0xFF) { + return -EINVAL; + } + + mutex_lock(&data->update_lock); + status = cpld_write_internal(client, addr, val); + if (unlikely(status < 0)) { + goto exit; + } + mutex_unlock(&data->update_lock); + return count; + +exit: + mutex_unlock(&data->update_lock); + return status; +} + +static void accton_i2c_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = + kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + + if (!node) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", + client->addr); + return; + } + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +static void accton_i2c_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + + mutex_unlock(&list_lock); +} + +static int cpld_add_attribute(struct cpld_data *data, struct attribute *attr) +{ + int new_max_attrs = ++data->num_attributes + ATTR_ALLOC_SIZE; + void *new_attrs = krealloc(data->group.attrs, + new_max_attrs * sizeof(void *), + GFP_KERNEL); + if (!new_attrs) + return -ENOMEM; + data->group.attrs = new_attrs; + + + data->group.attrs[data->num_attributes-1] = attr; + data->group.attrs[data->num_attributes] = NULL; + + return 0; +} + +static void cpld_dev_attr_init(struct device_attribute *dev_attr, + const char *name, umode_t mode, + show_func show, store_func store) +{ + sysfs_attr_init(&dev_attr->attr); + dev_attr->attr.name = name; + dev_attr->attr.mode = mode; + dev_attr->show = show; + dev_attr->store = store; +} + +static struct cpld_sensor * add_sensor(struct cpld_data *data, + const char *name, + u8 reg, u8 mask, bool invert, + bool update, umode_t mode, + show_func get, store_func set) +{ + struct cpld_sensor *sensor; + struct device_attribute *a; + + sensor = devm_kzalloc(data->dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return NULL; + a = &sensor->attribute; + + snprintf(sensor->name, sizeof(sensor->name), name); + sensor->reg = reg; + sensor->mask = mask; + sensor->update = update; + sensor->invert = invert; + cpld_dev_attr_init(a, sensor->name, + mode, + get, set); + + if (cpld_add_attribute(data, &a->attr)) + return NULL; + + sensor->next = data->sensors; + data->sensors = sensor; + + return sensor; +} + +static int add_attributes_cmn(struct cpld_data *data, struct attrs **cmn) +{ + u8 reg, i ; + bool invert; + struct attrs *a; + struct base_attrs *b; + + if (NULL == cmn) + return -1; + + for (i = 0; cmn[i]; i++) + { + a = cmn[i]; + + reg = a->reg; + invert = a->invert; + + b = a->base; + if (NULL == b) + break; + + if (add_sensor(data, b->name, + reg, 0xff, invert, + true, b->mode, + b->get, b->set) == NULL) + { + return -ENOMEM; + } + } + return 0; +} + +static int add_attributes_portly(struct cpld_data *data, struct attrs **pa) +{ + char name[NAME_SIZE+1]; + int i, j; + u8 reg, mask, invert; + struct attrs *a; + struct base_attrs *b; + + if (NULL == pa) + return -1; + + + for (i = 0; pa[i]; i++) { + a = pa[i]; + + invert = a->invert; + b = a->base; + if (b == NULL) + break; + + for (j = 0; j < data->sfp_num; j++) + { + snprintf(name, NAME_SIZE, "%s_%d", b->name, j+1); + get_reg_bit(a->reg, j, ®, &mask); + + if (add_sensor(data, name, reg, mask, invert, + true, b->mode, b->get, b->set) == NULL) + { + return -ENOMEM; + } + } + } + return 0; +} + +static int add_attributes(struct i2c_client *client, + struct cpld_data *data) +{ + struct model_attrs *m = data->cmn_attr; + + if (m == NULL) + return -EINVAL; + + /* Common attributes.*/ + add_attributes_cmn(data, m->cmn); + + /* Port-wise attributes.*/ + add_attributes_portly(data, m->portly); + + return 0; +} + +static int accton_i2c_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + struct cpld_data *data = NULL; + struct device *dev = &client->dev; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(dev, "i2c_check_functionality failed (0x%x)\n", client->addr); + return -EIO; + } + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) { + return -ENOMEM; + } + + data->model = dev_id->driver_data; + data->cmn_attr = &models_attr[data->model]; + get_sfp_spec(data->model, &data->sfp_num, &data->sfp_types); + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->dev = dev; + dev_info(dev, "chip found\n"); + + status = add_attributes(client, data); + if (status) + goto out_kfree; + + /* + * If there are no attributes, something is wrong. + * Bail out instead of trying to register nothing. + */ + if (!data->num_attributes) { + dev_err(dev, "No attributes found\n"); + status = -ENODEV; + goto out_kfree; + } + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &data->group); + if (status) { + goto out_kfree; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + accton_i2c_cpld_add_client(client); + dev_info(dev, "%s: cpld '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; +exit_remove: + sysfs_remove_group(&client->dev.kobj, &data->group); +out_kfree: + kfree(data->group.attrs); + return status; + +} + +static int accton_i2c_cpld_remove(struct i2c_client *client) +{ + struct cpld_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &data->group); + kfree(data->group.attrs); + accton_i2c_cpld_remove_client(client); + return 0; +} + +int accton_i2c_cpld_read(u8 cpld_addr, u8 reg) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EPERM; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_read_byte_data(cpld_node->client, reg); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(accton_i2c_cpld_read); + +int accton_i2c_cpld_write(unsigned short cpld_addr, u8 reg, u8 value) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int ret = -EIO; + + mutex_lock(&list_lock); + + list_for_each(list_node, &cpld_client_list) + { + cpld_node = list_entry(list_node, struct cpld_client_node, list); + + if (cpld_node->client->addr == cpld_addr) { + ret = i2c_smbus_write_byte_data(cpld_node->client, reg, value); + break; + } + } + + mutex_unlock(&list_lock); + + return ret; +} +EXPORT_SYMBOL(accton_i2c_cpld_write); + + +static const struct i2c_device_id accton_i2c_cpld_id[] = { + { "cpld_as7712", AS7712_32X}, + { "cpld_as7716", AS7716_32X}, + { "cpld_as7816", AS7816_64X}, + { "cpld_as7312", AS7312_54X}, + { "cpld_plain", PLAIN_CPLD}, + { }, +}; +MODULE_DEVICE_TABLE(i2c, accton_i2c_cpld_id); + +static struct i2c_driver accton_i2c_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "accton_i2c_cpld", + }, + .probe = accton_i2c_cpld_probe, + .remove = accton_i2c_cpld_remove, + .id_table = accton_i2c_cpld_id, + .address_list = normal_i2c, +}; + + +static int __init accton_i2c_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&accton_i2c_cpld_driver); +} + +static void __exit accton_i2c_cpld_exit(void) +{ + i2c_del_driver(&accton_i2c_cpld_driver); +} + +module_init(accton_i2c_cpld_init); +module_exit(accton_i2c_cpld_exit); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("accton_i2c_cpld driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/common/modules/accton_pmbus_3y.c b/platform/broadcom/sonic-platform-modules-accton/common/modules/accton_pmbus_3y.c new file mode 100644 index 000000000000..ed176189cdcd --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/common/modules/accton_pmbus_3y.c @@ -0,0 +1,1978 @@ +/* + * Hardware monitoring driver for 3Y power devices. + * + * Copyright (C) 2018 Accton Technology Corporation. + * Roy Lee + * + * Based on pmbus.c, pmbus.h and pmbus_core.c. + * Copyright 2012 Guenter Roeck/Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pmbus.h" + + +enum chips { + YM2651, + YM2401, + YM2851, + LIMITED_CHIPS, +}; + + +/* + * Number of additional attribute pointers to allocate + * with each call to krealloc + */ +#define PMBUS_ATTR_ALLOC_SIZE 32 + +/* + * Index into status register array, per status register group + */ +#define PB_STATUS_BASE 0 +#define PB_STATUS_VOUT_BASE (PB_STATUS_BASE + PMBUS_PAGES) +#define PB_STATUS_IOUT_BASE (PB_STATUS_VOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN_BASE (PB_STATUS_IOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN34_BASE (PB_STATUS_FAN_BASE + PMBUS_PAGES) +#define PB_STATUS_TEMP_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES) +#define PB_STATUS_INPUT_BASE (PB_STATUS_TEMP_BASE + PMBUS_PAGES) +#define PB_STATUS_VMON_BASE (PB_STATUS_INPUT_BASE + 1) + +#define PB_NUM_STATUS_REG (PB_STATUS_VMON_BASE + 1) + +#define PMBUS_NAME_SIZE 24 + +struct pmbus_sensor { + struct pmbus_sensor *next; + char name[PMBUS_NAME_SIZE]; /* sysfs sensor name */ + struct device_attribute attribute; + u8 page; /* page number */ + u16 reg; /* register */ + enum pmbus_sensor_classes class; /* sensor class */ + bool update; /* runtime sensor update needed */ + int data; /* Sensor data. + Negative if there was a read error */ +}; +#define to_pmbus_sensor(_attr) \ + container_of(_attr, struct pmbus_sensor, attribute) + +struct pmbus_boolean { + char name[PMBUS_NAME_SIZE]; /* sysfs boolean name */ + struct sensor_device_attribute attribute; + struct pmbus_sensor *s1; + struct pmbus_sensor *s2; +}; +#define to_pmbus_boolean(_attr) \ + container_of(_attr, struct pmbus_boolean, attribute) + +struct pmbus_label { + char name[PMBUS_NAME_SIZE]; /* sysfs label name */ + struct device_attribute attribute; + char label[PMBUS_NAME_SIZE]; /* label */ +}; +#define to_pmbus_label(_attr) \ + container_of(_attr, struct pmbus_label, attribute) + +struct pmbus_data { + struct device *dev; + struct device *hwmon_dev; + + u32 flags; /* from platform data */ + + int exponent[PMBUS_PAGES]; + /* linear mode: exponent for output voltages */ + + const struct pmbus_driver_info *info; + + int max_attributes; + int num_attributes; + struct attribute_group group; + const struct attribute_group *groups[2]; + + struct pmbus_sensor *sensors; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* + * A single status register covers multiple attributes, + * so we keep them all together. + */ + u8 status[PB_NUM_STATUS_REG]; + u8 status_register; + + u8 currpage; + bool linear_16; +}; + + +static int limited_models(const struct i2c_device_id *id); + +int _pmbus_set_page(struct i2c_client *client, u8 page) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int rv = 0; + int newpage; + + if (page != data->currpage) { + rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE); + if (newpage != page) + rv = -EIO; + else + data->currpage = page; + } + return 0; +} + +/* + * _pmbus_write_byte() is similar to pmbus_write_byte(), but checks if + * a device specific mapping function exists and calls it if necessary. + */ +static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + int status; + + if (info->write_byte) { + status = info->write_byte(client, page, value); + if (status != -ENODATA) + return status; + } + /*Ignore page*/ + return i2c_smbus_write_byte(client, value);; +} + +/* + * _pmbus_write_word_data() is similar to pmbus_write_word_data(), but checks if + * a device specific mapping function exists and calls it if necessary. + */ +static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + if (reg >= PMBUS_VIRT_BASE) + return -ENXIO; + /*Ignore page*/ + return i2c_smbus_write_word_data(client, reg, word); +} + +/* + * _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if + * a device specific mapping function exists and calls it if necessary. + */ +static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg) +{ + /*Ignore page*/ + return i2c_smbus_read_word_data(client, reg);; +} + +/* + * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if + * a device specific mapping function exists and calls it if necessary. + */ +static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg) +{ + if (reg >= PMBUS_VIRT_BASE) + return -ENXIO; + + /*Ignore page*/ + return i2c_smbus_read_byte_data(client, reg); +} + +static void pmbus_clear_fault_page(struct i2c_client *client, int page) +{ + _pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); +} + + +static int pmbus_check_status_cml(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int status, status2; + + status = _pmbus_read_byte_data(client, -1, data->status_register); + if (status < 0 || (status & PB_STATUS_CML)) { + status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML); + if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND)) + return -EIO; + } + return 0; +} + +static bool pmbus_check_register(struct i2c_client *client, + int (*func)(struct i2c_client *client, + int page, int reg), + int page, int reg) +{ + int rv; + struct pmbus_data *data = i2c_get_clientdata(client); + + if((data->flags & PMBUS_SKIP_STATUS_CHECK)) + return 1; + + rv = func(client, page, reg); + if (rv >= 0) + rv = pmbus_check_status_cml(client); + pmbus_clear_fault_page(client, -1); + return rv >= 0; +} + +static struct _pmbus_status { + u32 func; + u16 base; + u16 reg; +} pmbus_status[] = { + { PMBUS_HAVE_STATUS_VOUT, PB_STATUS_VOUT_BASE, PMBUS_STATUS_VOUT }, + { PMBUS_HAVE_STATUS_IOUT, PB_STATUS_IOUT_BASE, PMBUS_STATUS_IOUT }, + { PMBUS_HAVE_STATUS_TEMP, PB_STATUS_TEMP_BASE, + PMBUS_STATUS_TEMPERATURE + }, + { PMBUS_HAVE_STATUS_FAN12, PB_STATUS_FAN_BASE, PMBUS_STATUS_FAN_12 }, + { PMBUS_HAVE_STATUS_FAN34, PB_STATUS_FAN34_BASE, PMBUS_STATUS_FAN_34 }, +}; + +void _pmbus_clear_faults(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < data->info->pages; i++) + pmbus_clear_fault_page(client, i); +} +static struct pmbus_data *pmbus_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + struct pmbus_sensor *sensor; + + mutex_lock(&data->update_lock); + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + int i, j; + + for (i = 0; i < info->pages; i++) { + data->status[PB_STATUS_BASE + i] + = _pmbus_read_byte_data(client, i, + data->status_register); + for (j = 0; j < ARRAY_SIZE(pmbus_status); j++) { + struct _pmbus_status *s = &pmbus_status[j]; + + if (!(info->func[i] & s->func)) + continue; + data->status[s->base + i] + = _pmbus_read_byte_data(client, i, + s->reg); + } + } + + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) + data->status[PB_STATUS_INPUT_BASE] + = _pmbus_read_byte_data(client, 0, + PMBUS_STATUS_INPUT); + + if (info->func[0] & PMBUS_HAVE_STATUS_VMON) + data->status[PB_STATUS_VMON_BASE] + = _pmbus_read_byte_data(client, 0, + PMBUS_VIRT_STATUS_VMON); + + for (sensor = data->sensors; sensor; sensor = sensor->next) { + if (!data->valid || sensor->update) + sensor->data + = _pmbus_read_word_data(client, + sensor->page, + sensor->reg); + } + _pmbus_clear_faults(client); + data->last_updated = jiffies; + data->valid = 1; + } + mutex_unlock(&data->update_lock); + return data; +} + +/* + * Convert linear sensor values to milli- or micro-units + * depending on sensor type. + */ +static long pmbus_reg2data_linear(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + s16 exponent; + s32 mantissa; + long val; + + /* LINEAR16 */ + if ( data->linear_16 && + sensor->class == PSC_VOLTAGE_OUT) { + exponent = data->exponent[sensor->page]; + mantissa = (u16) sensor->data; + } else + { /* LINEAR11 */ + exponent = ((s16)sensor->data) >> 11; + mantissa = ((s16)((sensor->data & 0x7ff) << 5)) >> 5; + } + + val = mantissa; + + /* scale result to milli-units for all sensors except fans */ + if (sensor->class != PSC_FAN) + val = val * 1000L; + + /* scale result to micro-units for power sensors */ + if (sensor->class == PSC_POWER) + val = val * 1000L; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +/* + * Convert direct sensor values to milli- or micro-units + * depending on sensor type. + */ +static long pmbus_reg2data_direct(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + long val = (s16) sensor->data; + long m, b, R; + + m = data->info->m[sensor->class]; + b = data->info->b[sensor->class]; + R = data->info->R[sensor->class]; + + if (m == 0) + return 0; + + /* X = 1/m * (Y * 10^-R - b) */ + R = -R; + /* scale result to milli-units for everything but fans */ + if (sensor->class != PSC_FAN) { + R += 3; + b *= 1000; + } + + /* scale result to micro-units for power sensors */ + if (sensor->class == PSC_POWER) { + R += 3; + b *= 1000; + } + + while (R > 0) { + val *= 10; + R--; + } + while (R < 0) { + val = DIV_ROUND_CLOSEST(val, 10); + R++; + } + + return (val - b) / m; +} + +/* + * Convert VID sensor values to milli- or micro-units + * depending on sensor type. + * We currently only support VR11. + */ +static long pmbus_reg2data_vid(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + long val = sensor->data; + + if (val < 0x02 || val > 0xb2) + return 0; + return DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100); +} + +static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) +{ + long val; + + switch (data->info->format[sensor->class]) { + case direct: + val = pmbus_reg2data_direct(data, sensor); + break; + case vid: + val = pmbus_reg2data_vid(data, sensor); + break; + case linear: + default: + val = pmbus_reg2data_linear(data, sensor); + break; + } + return val; +} + +#define MAX_MANTISSA (1023 * 1000) +#define MIN_MANTISSA (511 * 1000) + +static u16 pmbus_data2reg_linear(struct pmbus_data *data, + struct pmbus_sensor *sensor, long val) +{ + s16 exponent = 0, mantissa; + bool negative = false; + + /* simple case */ + if (val == 0) + return 0; + + if (data->linear_16 && + sensor->class == PSC_VOLTAGE_OUT) { + /* LINEAR16 does not support negative voltages */ + if (val < 0) + return 0; + + /* + * For a static exponents, we don't have a choice + * but to adjust the value to it. + */ + if (data->exponent[sensor->page] < 0) + val <<= -data->exponent[sensor->page]; + else + val >>= data->exponent[sensor->page]; + val = DIV_ROUND_CLOSEST(val, 1000); + return val & 0xffff; + } + + if (val < 0) { + negative = true; + val = -val; + } + + /* Power is in uW. Convert to mW before converting. */ + if (sensor->class == PSC_POWER) + val = DIV_ROUND_CLOSEST(val, 1000L); + + /* + * For simplicity, convert fan data to milli-units + * before calculating the exponent. + */ + if (sensor->class == PSC_FAN) + val = val * 1000; + + /* Reduce large mantissa until it fits into 10 bit */ + while (val >= MAX_MANTISSA && exponent < 15) { + exponent++; + val >>= 1; + } + /* Increase small mantissa to improve precision */ + while (val < MIN_MANTISSA && exponent > -15) { + exponent--; + val <<= 1; + } + + /* Convert mantissa from milli-units to units */ + mantissa = DIV_ROUND_CLOSEST(val, 1000); + + /* Ensure that resulting number is within range */ + if (mantissa > 0x3ff) + mantissa = 0x3ff; + + /* restore sign */ + if (negative) + mantissa = -mantissa; + + /* Convert to 5 bit exponent, 11 bit mantissa */ + return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); +} + +static u16 pmbus_data2reg_direct(struct pmbus_data *data, + struct pmbus_sensor *sensor, long val) +{ + long m, b, R; + + m = data->info->m[sensor->class]; + b = data->info->b[sensor->class]; + R = data->info->R[sensor->class]; + + /* Power is in uW. Adjust R and b. */ + if (sensor->class == PSC_POWER) { + R -= 3; + b *= 1000; + } + + /* Calculate Y = (m * X + b) * 10^R */ + if (sensor->class != PSC_FAN) { + R -= 3; /* Adjust R and b for data in milli-units */ + b *= 1000; + } + val = val * m + b; + + while (R > 0) { + val *= 10; + R--; + } + while (R < 0) { + val = DIV_ROUND_CLOSEST(val, 10); + R++; + } + + return val; +} + +static u16 pmbus_data2reg_vid(struct pmbus_data *data, + struct pmbus_sensor *sensor, long val) +{ + val = clamp_val(val, 500, 1600); + + return 2 + DIV_ROUND_CLOSEST((1600 - val) * 100, 625); +} + +static u16 pmbus_data2reg(struct pmbus_data *data, + struct pmbus_sensor *sensor, long val) +{ + u16 regval; + + switch (data->info->format[sensor->class]) { + case direct: + regval = pmbus_data2reg_direct(data, sensor, val); + break; + case vid: + regval = pmbus_data2reg_vid(data, sensor, val); + break; + case linear: + default: + regval = pmbus_data2reg_linear(data, sensor, val); + break; + } + return regval; +} + +/* + * Return boolean calculated from converted data. + * defines a status register index and mask. + * The mask is in the lower 8 bits, the register index is in bits 8..23. + * + * The associated pmbus_boolean structure contains optional pointers to two + * sensor attributes. If specified, those attributes are compared against each + * other to determine if a limit has been exceeded. + * + * If the sensor attribute pointers are NULL, the function returns true if + * (status[reg] & mask) is true. + * + * If sensor attribute pointers are provided, a comparison against a specified + * limit has to be performed to determine the boolean result. + * In this case, the function returns true if v1 >= v2 (where v1 and v2 are + * sensor values referenced by sensor attribute pointers s1 and s2). + * + * To determine if an object exceeds upper limits, specify = . + * To determine if an object exceeds lower limits, specify = . + * + * If a negative value is stored in any of the referenced registers, this value + * reflects an error code which will be returned. + */ +static int pmbus_get_boolean(struct pmbus_data *data, struct pmbus_boolean *b, + int index) +{ + struct pmbus_sensor *s1 = b->s1; + struct pmbus_sensor *s2 = b->s2; + u16 reg = (index >> 8) & 0xffff; + u8 mask = index & 0xff; + int ret, status; + u8 regval; + + status = data->status[reg]; + if (status < 0) + return status; + + regval = status & mask; + if (!s1 && !s2) { + ret = !!regval; + } else if (!s1 || !s2) { + WARN(1, "Bad boolean descriptor %p: s1=%p, s2=%p\n", b, s1, s2); + return 0; + } else { + long v1, v2; + + if (s1->data < 0) + return s1->data; + if (s2->data < 0) + return s2->data; + + v1 = pmbus_reg2data(data, s1); + v2 = pmbus_reg2data(data, s2); + ret = !!(regval && v1 >= v2); + } + return ret; +} + +static ssize_t pmbus_show_boolean(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct pmbus_boolean *boolean = to_pmbus_boolean(attr); + struct pmbus_data *data = pmbus_update_device(dev); + int val; + + val = pmbus_get_boolean(data, boolean, attr->index); + if (val < 0) { + return snprintf(buf, PAGE_SIZE, "%d\n", 1); + } + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t pmbus_show_sensor(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct pmbus_data *data = pmbus_update_device(dev); + struct pmbus_sensor *sensor = to_pmbus_sensor(devattr); + + + if (sensor->data < 0) { + return snprintf(buf, PAGE_SIZE, "%d\n", 0); + } + + + return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor)); +} + +static ssize_t pmbus_set_sensor(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct pmbus_data *data = i2c_get_clientdata(client); + struct pmbus_sensor *sensor = to_pmbus_sensor(devattr); + ssize_t rv = count; + long val = 0; + int ret; + u16 regval; + + if (kstrtol(buf, 10, &val) < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + regval = pmbus_data2reg(data, sensor, val); + ret = _pmbus_write_word_data(client, sensor->page, sensor->reg, regval); + if (ret < 0) + rv = ret; + else + sensor->data = regval; + mutex_unlock(&data->update_lock); + return rv; +} + +static ssize_t pmbus_show_label(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct pmbus_label *label = to_pmbus_label(da); + + return snprintf(buf, PAGE_SIZE, "%s\n", label->label); +} + +static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr) +{ + if (data->num_attributes >= data->max_attributes - 1) { + int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE; + void *new_attrs = krealloc(data->group.attrs, + new_max_attrs * sizeof(void *), + GFP_KERNEL); + if (!new_attrs) + return -ENOMEM; + data->group.attrs = new_attrs; + data->max_attributes = new_max_attrs; + } + + + + data->group.attrs[data->num_attributes++] = attr; + data->group.attrs[data->num_attributes] = NULL; + return 0; +} + +static void pmbus_dev_attr_init(struct device_attribute *dev_attr, + const char *name, + umode_t mode, + ssize_t (*show)(struct device *dev, + struct device_attribute *attr, + char *buf), + ssize_t (*store)(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count)) +{ + sysfs_attr_init(&dev_attr->attr); + dev_attr->attr.name = name; + dev_attr->attr.mode = mode; + dev_attr->show = show; + dev_attr->store = store; +} + +static void pmbus_attr_init(struct sensor_device_attribute *a, + const char *name, + umode_t mode, + ssize_t (*show)(struct device *dev, + struct device_attribute *attr, + char *buf), + ssize_t (*store)(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count), + int idx) +{ + pmbus_dev_attr_init(&a->dev_attr, name, mode, show, store); + a->index = idx; +} + +static int pmbus_add_boolean(struct pmbus_data *data, + const char *name, const char *type, int seq, + struct pmbus_sensor *s1, + struct pmbus_sensor *s2, + u16 reg, u8 mask) +{ + struct pmbus_boolean *boolean; + struct sensor_device_attribute *a; + + boolean = devm_kzalloc(data->dev, sizeof(*boolean), GFP_KERNEL); + if (!boolean) + return -ENOMEM; + + a = &boolean->attribute; + + snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s", + name, seq, type); + boolean->s1 = s1; + boolean->s2 = s2; + pmbus_attr_init(a, boolean->name, S_IRUGO, pmbus_show_boolean, NULL, + (reg << 8) | mask); + + return pmbus_add_attribute(data, &a->dev_attr.attr); +} + +static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data, + const char *name, const char *type, + int seq, int page, int reg, + enum pmbus_sensor_classes class, + bool update, bool readonly) +{ + struct pmbus_sensor *sensor; + struct device_attribute *a; + + sensor = devm_kzalloc(data->dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return NULL; + a = &sensor->attribute; + + snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s", + name, seq, type); + sensor->page = page; + sensor->reg = reg; + sensor->class = class; + sensor->update = update; + pmbus_dev_attr_init(a, sensor->name, + readonly ? S_IRUGO : S_IRUGO | S_IWUSR, + pmbus_show_sensor, pmbus_set_sensor); + + if (pmbus_add_attribute(data, &a->attr)) + return NULL; + + sensor->next = data->sensors; + data->sensors = sensor; + + return sensor; +} + +static int pmbus_add_label(struct pmbus_data *data, + const char *name, int seq, + const char *lstring, int index) +{ + struct pmbus_label *label; + struct device_attribute *a; + + label = devm_kzalloc(data->dev, sizeof(*label), GFP_KERNEL); + if (!label) + return -ENOMEM; + + a = &label->attribute; + + snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq); + if (!index) + strncpy(label->label, lstring, sizeof(label->label) - 1); + else + snprintf(label->label, sizeof(label->label), "%s%d", lstring, + index); + + pmbus_dev_attr_init(a, label->name, S_IRUGO, pmbus_show_label, NULL); + return pmbus_add_attribute(data, &a->attr); +} + +/* + * Search for attributes. Allocate sensors, booleans, and labels as needed. + */ + +/* + * The pmbus_limit_attr structure describes a single limit attribute + * and its associated alarm attribute. + */ +struct pmbus_limit_attr { + u16 reg; /* Limit register */ + u16 sbit; /* Alarm attribute status bit */ + bool update; /* True if register needs updates */ + bool low; /* True if low limit; for limits with compare + functions only */ + const char *attr; /* Attribute name */ + const char *alarm; /* Alarm attribute name */ +}; + +/* + * The pmbus_sensor_attr structure describes one sensor attribute. This + * description includes a reference to the associated limit attributes. + */ +struct pmbus_sensor_attr { + u16 reg; /* sensor register */ + u8 gbit; /* generic status bit */ + u8 nlimit; /* # of limit registers */ + enum pmbus_sensor_classes class;/* sensor class */ + const char *label; /* sensor label */ + bool paged; /* true if paged sensor */ + bool update; /* true if update needed */ + bool compare; /* true if compare function needed */ + u32 func; /* sensor mask */ + u32 sfunc; /* sensor status mask */ + int sbase; /* status base register */ + const struct pmbus_limit_attr *limit;/* limit registers */ +}; + +/* + * Add a set of limit attributes and, if supported, the associated + * alarm attributes. + * returns 0 if no alarm register found, 1 if an alarm register was found, + * < 0 on errors. + */ +static int pmbus_add_limit_attrs(struct i2c_client *client, + struct pmbus_data *data, + const struct pmbus_driver_info *info, + const char *name, int index, int page, + struct pmbus_sensor *base, + const struct pmbus_sensor_attr *attr) +{ + const struct pmbus_limit_attr *l = attr->limit; + int nlimit = attr->nlimit; + int have_alarm = 0; + int i, ret; + struct pmbus_sensor *curr; + + for (i = 0; i < nlimit; i++) { + if (_pmbus_check_word_register(client, page, l->reg)) + { + curr = pmbus_add_sensor(data, name, l->attr, index, + page, l->reg, attr->class, + attr->update || l->update, + false); + if (!curr) + return -ENOMEM; + if (l->sbit && (info->func[page] & attr->sfunc)) { + ret = pmbus_add_boolean(data, name, + l->alarm, index, + attr->compare ? l->low ? curr : base + : NULL, + attr->compare ? l->low ? base : curr + : NULL, + attr->sbase + page, l->sbit); + if (ret) + return ret; + have_alarm = 1; + } + } + l++; + } + return have_alarm; +} + +bool _pmbus_check_byte_register(struct i2c_client *client, int page, int reg) +{ + return pmbus_check_register(client, _pmbus_read_byte_data, page, reg); +} + + +bool _pmbus_check_word_register(struct i2c_client *client, int page, int reg) +{ + return pmbus_check_register(client, _pmbus_read_word_data, page, reg); +} + +static int pmbus_add_sensor_attrs_one(struct i2c_client *client, + struct pmbus_data *data, + const struct pmbus_driver_info *info, + const char *name, + int index, int page, + const struct pmbus_sensor_attr *attr) +{ + struct pmbus_sensor *base; + int ret; + + if (attr->label) { + ret = pmbus_add_label(data, name, index, attr->label, + attr->paged ? page + 1 : 0); + if (ret) + return ret; + } + base = pmbus_add_sensor(data, name, "input", index, page, attr->reg, + attr->class, true, true); + + + if (!base) + return -ENOMEM; + + if (attr->sfunc) { + ret = pmbus_add_limit_attrs(client, data, info, name, + index, page, base, attr); + if (ret < 0) + return ret; + /* + * Add generic alarm attribute only if there are no individual + * alarm attributes, if there is a global alarm bit, and if + * the generic status register for this page is accessible. + */ + if (!ret && attr->gbit && + _pmbus_check_byte_register(client, page, + data->status_register)) { + ret = pmbus_add_boolean(data, name, "alarm", index, + NULL, NULL, + PB_STATUS_BASE + page, + attr->gbit); + if (ret) + return ret; + } + } + return 0; +} + +static int pmbus_add_sensor_attrs(struct i2c_client *client, + struct pmbus_data *data, + const char *name, + const struct pmbus_sensor_attr *attrs, + int nattrs) +{ + const struct pmbus_driver_info *info = data->info; + int index, i; + int ret; + + index = 1; + for (i = 0; i < nattrs; i++) { + int page, pages; + + pages = attrs->paged ? info->pages : 1; + for (page = 0; page < pages; page++) { + if (!(info->func[page] & attrs->func)) + continue; + ret = pmbus_add_sensor_attrs_one(client, data, info, + name, index, page, + attrs); + if (ret) + return ret; + index++; + } + attrs++; + } + return 0; +} + +static const struct pmbus_limit_attr vin_limit_attrs[] = { + { + .reg = PMBUS_VIN_UV_WARN_LIMIT, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_VOLTAGE_UV_WARNING, + }, { + .reg = PMBUS_VIN_UV_FAULT_LIMIT, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_VOLTAGE_UV_FAULT, + }, { + .reg = PMBUS_VIN_OV_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_VOLTAGE_OV_WARNING, + }, { + .reg = PMBUS_VIN_OV_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_VOLTAGE_OV_FAULT, + }, { + .reg = PMBUS_VIRT_READ_VIN_AVG, + .update = true, + .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_VIN_MIN, + .update = true, + .attr = "lowest", + }, { + .reg = PMBUS_VIRT_READ_VIN_MAX, + .update = true, + .attr = "highest", + }, { + .reg = PMBUS_VIRT_RESET_VIN_HISTORY, + .attr = "reset_history", + }, +}; + +static const struct pmbus_limit_attr vmon_limit_attrs[] = { + { + .reg = PMBUS_VIRT_VMON_UV_WARN_LIMIT, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_VOLTAGE_UV_WARNING, + }, { + .reg = PMBUS_VIRT_VMON_UV_FAULT_LIMIT, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_VOLTAGE_UV_FAULT, + }, { + .reg = PMBUS_VIRT_VMON_OV_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_VOLTAGE_OV_WARNING, + }, { + .reg = PMBUS_VIRT_VMON_OV_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_VOLTAGE_OV_FAULT, + } +}; + +static const struct pmbus_limit_attr vout_limit_attrs[] = { + { + .reg = PMBUS_VOUT_UV_WARN_LIMIT, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_VOLTAGE_UV_WARNING, + }, { + .reg = PMBUS_VOUT_UV_FAULT_LIMIT, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_VOLTAGE_UV_FAULT, + }, { + .reg = PMBUS_VOUT_OV_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_VOLTAGE_OV_WARNING, + }, { + .reg = PMBUS_VOUT_OV_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_VOLTAGE_OV_FAULT, + }, { + .reg = PMBUS_VIRT_READ_VOUT_AVG, + .update = true, + .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_VOUT_MIN, + .update = true, + .attr = "lowest", + }, { + .reg = PMBUS_VIRT_READ_VOUT_MAX, + .update = true, + .attr = "highest", + }, { + .reg = PMBUS_VIRT_RESET_VOUT_HISTORY, + .attr = "reset_history", + } +}; + +static const struct pmbus_sensor_attr voltage_attributes[] = { + { + .reg = PMBUS_READ_VIN, + .class = PSC_VOLTAGE_IN, + .label = "vin", + .func = PMBUS_HAVE_VIN, + .sfunc = PMBUS_HAVE_STATUS_INPUT, + .sbase = PB_STATUS_INPUT_BASE, + .gbit = PB_STATUS_VIN_UV, + .limit = vin_limit_attrs, + .nlimit = ARRAY_SIZE(vin_limit_attrs), + }, { + .reg = PMBUS_VIRT_READ_VMON, + .class = PSC_VOLTAGE_IN, + .label = "vmon", + .func = PMBUS_HAVE_VMON, + .sfunc = PMBUS_HAVE_STATUS_VMON, + .sbase = PB_STATUS_VMON_BASE, + .limit = vmon_limit_attrs, + .nlimit = ARRAY_SIZE(vmon_limit_attrs), + }, { + .reg = PMBUS_READ_VCAP, + .class = PSC_VOLTAGE_IN, + .label = "vcap", + .func = PMBUS_HAVE_VCAP, + }, { + .reg = PMBUS_READ_VOUT, + .class = PSC_VOLTAGE_OUT, + .label = "vout", + .paged = true, + .func = PMBUS_HAVE_VOUT, + .sfunc = PMBUS_HAVE_STATUS_VOUT, + .sbase = PB_STATUS_VOUT_BASE, + .gbit = PB_STATUS_VOUT_OV, + .limit = vout_limit_attrs, + .nlimit = ARRAY_SIZE(vout_limit_attrs), + } +}; + +/* Current attributes */ + +static const struct pmbus_limit_attr iin_limit_attrs[] = { + { + .reg = PMBUS_IIN_OC_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_IIN_OC_WARNING, + }, { + .reg = PMBUS_IIN_OC_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_IIN_OC_FAULT, + }, { + .reg = PMBUS_VIRT_READ_IIN_AVG, + .update = true, + .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_IIN_MIN, + .update = true, + .attr = "lowest", + }, { + .reg = PMBUS_VIRT_READ_IIN_MAX, + .update = true, + .attr = "highest", + }, { + .reg = PMBUS_VIRT_RESET_IIN_HISTORY, + .attr = "reset_history", + } +}; + +static const struct pmbus_limit_attr iout_limit_attrs[] = { + { + .reg = PMBUS_IOUT_OC_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_IOUT_OC_WARNING, + }, { + .reg = PMBUS_IOUT_UC_FAULT_LIMIT, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_IOUT_UC_FAULT, + }, { + .reg = PMBUS_IOUT_OC_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_IOUT_OC_FAULT, + }, { + .reg = PMBUS_VIRT_READ_IOUT_AVG, + .update = true, + .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_IOUT_MIN, + .update = true, + .attr = "lowest", + }, { + .reg = PMBUS_VIRT_READ_IOUT_MAX, + .update = true, + .attr = "highest", + }, { + .reg = PMBUS_VIRT_RESET_IOUT_HISTORY, + .attr = "reset_history", + } +}; + +static const struct pmbus_sensor_attr current_attributes[] = { + { + .reg = PMBUS_READ_IIN, + .class = PSC_CURRENT_IN, + .label = "iin", + .func = PMBUS_HAVE_IIN, + .sfunc = PMBUS_HAVE_STATUS_INPUT, + .sbase = PB_STATUS_INPUT_BASE, + .limit = iin_limit_attrs, + .nlimit = ARRAY_SIZE(iin_limit_attrs), + }, { + .reg = PMBUS_READ_IOUT, + .class = PSC_CURRENT_OUT, + .label = "iout", + .paged = true, + .func = PMBUS_HAVE_IOUT, + .sfunc = PMBUS_HAVE_STATUS_IOUT, + .sbase = PB_STATUS_IOUT_BASE, + .gbit = PB_STATUS_IOUT_OC, + .limit = iout_limit_attrs, + .nlimit = ARRAY_SIZE(iout_limit_attrs), + } +}; + +/* Power attributes */ + +static const struct pmbus_limit_attr pin_limit_attrs[] = { + { + .reg = PMBUS_PIN_OP_WARN_LIMIT, + .attr = "max", + .alarm = "alarm", + .sbit = PB_PIN_OP_WARNING, + }, { + .reg = PMBUS_VIRT_READ_PIN_AVG, + .update = true, + .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_PIN_MAX, + .update = true, + .attr = "input_highest", + }, { + .reg = PMBUS_VIRT_RESET_PIN_HISTORY, + .attr = "reset_history", + } +}; + +static const struct pmbus_limit_attr pout_limit_attrs[] = { + { + .reg = PMBUS_POUT_MAX, + .attr = "cap", + .alarm = "cap_alarm", + .sbit = PB_POWER_LIMITING, + }, { + .reg = PMBUS_POUT_OP_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_POUT_OP_WARNING, + }, { + .reg = PMBUS_POUT_OP_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_POUT_OP_FAULT, + }, { + .reg = PMBUS_VIRT_READ_POUT_AVG, + .update = true, + .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_POUT_MAX, + .update = true, + .attr = "input_highest", + }, { + .reg = PMBUS_VIRT_RESET_POUT_HISTORY, + .attr = "reset_history", + } +}; + +static const struct pmbus_sensor_attr power_attributes[] = { + { + .reg = PMBUS_READ_PIN, + .class = PSC_POWER, + .label = "pin", + .func = PMBUS_HAVE_PIN, + .sfunc = PMBUS_HAVE_STATUS_INPUT, + .sbase = PB_STATUS_INPUT_BASE, + .limit = pin_limit_attrs, + .nlimit = ARRAY_SIZE(pin_limit_attrs), + }, { + .reg = PMBUS_READ_POUT, + .class = PSC_POWER, + .label = "pout", + .paged = true, + .func = PMBUS_HAVE_POUT, + .sfunc = PMBUS_HAVE_STATUS_IOUT, + .sbase = PB_STATUS_IOUT_BASE, + .limit = pout_limit_attrs, + .nlimit = ARRAY_SIZE(pout_limit_attrs), + } +}; + +/* Temperature atributes */ + +static const struct pmbus_limit_attr temp_limit_attrs[] = { + { + .reg = PMBUS_UT_WARN_LIMIT, + .low = true, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_TEMP_UT_WARNING, + }, { + .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_TEMP_UT_FAULT, + }, { + .reg = PMBUS_OT_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_TEMP_OT_WARNING, + }, { + .reg = PMBUS_OT_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_TEMP_OT_FAULT, + }, { + .reg = PMBUS_VIRT_READ_TEMP_MIN, + .attr = "lowest", + }, { + .reg = PMBUS_VIRT_READ_TEMP_AVG, + .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_TEMP_MAX, + .attr = "highest", + }, { + .reg = PMBUS_VIRT_RESET_TEMP_HISTORY, + .attr = "reset_history", + } +}; + +static const struct pmbus_limit_attr temp_limit_attrs2[] = { + { + .reg = PMBUS_UT_WARN_LIMIT, + .low = true, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_TEMP_UT_WARNING, + }, { + .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_TEMP_UT_FAULT, + }, { + .reg = PMBUS_OT_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_TEMP_OT_WARNING, + }, { + .reg = PMBUS_OT_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_TEMP_OT_FAULT, + }, { + .reg = PMBUS_VIRT_READ_TEMP2_MIN, + .attr = "lowest", + }, { + .reg = PMBUS_VIRT_READ_TEMP2_AVG, + .attr = "average", + }, { + .reg = PMBUS_VIRT_READ_TEMP2_MAX, + .attr = "highest", + }, { + .reg = PMBUS_VIRT_RESET_TEMP2_HISTORY, + .attr = "reset_history", + } +}; + +static const struct pmbus_limit_attr temp_limit_attrs3[] = { + { + .reg = PMBUS_UT_WARN_LIMIT, + .low = true, + .attr = "min", + .alarm = "min_alarm", + .sbit = PB_TEMP_UT_WARNING, + }, { + .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, + .attr = "lcrit", + .alarm = "lcrit_alarm", + .sbit = PB_TEMP_UT_FAULT, + }, { + .reg = PMBUS_OT_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_TEMP_OT_WARNING, + }, { + .reg = PMBUS_OT_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_TEMP_OT_FAULT, + } +}; + +static const struct pmbus_sensor_attr temp_attributes[] = { + { + .reg = PMBUS_READ_TEMPERATURE_1, + .class = PSC_TEMPERATURE, + .paged = true, + .update = true, + .compare = true, + .func = PMBUS_HAVE_TEMP, + .sfunc = PMBUS_HAVE_STATUS_TEMP, + .sbase = PB_STATUS_TEMP_BASE, + .gbit = PB_STATUS_TEMPERATURE, + .limit = temp_limit_attrs, + .nlimit = ARRAY_SIZE(temp_limit_attrs), + }, { + .reg = PMBUS_READ_TEMPERATURE_2, + .class = PSC_TEMPERATURE, + .paged = true, + .update = true, + .compare = true, + .func = PMBUS_HAVE_TEMP2, + .sfunc = PMBUS_HAVE_STATUS_TEMP, + .sbase = PB_STATUS_TEMP_BASE, + .gbit = PB_STATUS_TEMPERATURE, + .limit = temp_limit_attrs2, + .nlimit = ARRAY_SIZE(temp_limit_attrs2), + }, { + .reg = PMBUS_READ_TEMPERATURE_3, + .class = PSC_TEMPERATURE, + .paged = true, + .update = true, + .compare = true, + .func = PMBUS_HAVE_TEMP3, + .sfunc = PMBUS_HAVE_STATUS_TEMP, + .sbase = PB_STATUS_TEMP_BASE, + .gbit = PB_STATUS_TEMPERATURE, + .limit = temp_limit_attrs3, + .nlimit = ARRAY_SIZE(temp_limit_attrs3), + } +}; + +static const int pmbus_fan_registers[] = { + PMBUS_READ_FAN_SPEED_1, + PMBUS_READ_FAN_SPEED_2, + PMBUS_READ_FAN_SPEED_3, + PMBUS_READ_FAN_SPEED_4 +}; + +static const int pmbus_fan_config_registers[] = { + PMBUS_FAN_CONFIG_12, + PMBUS_FAN_CONFIG_12, + PMBUS_FAN_CONFIG_34, + PMBUS_FAN_CONFIG_34 +}; + +static const int pmbus_fan_status_registers[] = { + PMBUS_STATUS_FAN_12, + PMBUS_STATUS_FAN_12, + PMBUS_STATUS_FAN_34, + PMBUS_STATUS_FAN_34 +}; + +static const u32 pmbus_fan_flags[] = { + PMBUS_HAVE_FAN12, + PMBUS_HAVE_FAN12, + PMBUS_HAVE_FAN34, + PMBUS_HAVE_FAN34 +}; + +static const u32 pmbus_fan_status_flags[] = { + PMBUS_HAVE_STATUS_FAN12, + PMBUS_HAVE_STATUS_FAN12, + PMBUS_HAVE_STATUS_FAN34, + PMBUS_HAVE_STATUS_FAN34 +}; + +/* Fans */ +static int pmbus_add_fan_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + const struct pmbus_driver_info *info = data->info; + int index = 1; + int page; + int ret; + + for (page = 0; page < info->pages; page++) { + int f; + + for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) { + int regval; + + if (f >= info->fan_num) + break; + + if (!(info->func[page] & pmbus_fan_flags[f])) + break; + + if (!_pmbus_check_word_register(client, page, + pmbus_fan_registers[f])) + break; + + /* + * Skip fan if not installed. + * Each fan configuration register covers multiple fans, + * so we have to do some magic. + */ + regval = _pmbus_read_byte_data(client, page, + pmbus_fan_config_registers[f]); + if (regval < 0 || + (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4))))) + continue; + + if (pmbus_add_sensor(data, "fan", "input", index, + page, pmbus_fan_registers[f], + PSC_FAN, true, true) == NULL) + return -ENOMEM; + + /* + * Each fan status register covers multiple fans, + * so we have to do some magic. + */ + if ((info->func[page] & pmbus_fan_status_flags[f]) && + _pmbus_check_byte_register(client, + page, pmbus_fan_status_registers[f])) { + int base; + + if (f > 1) /* fan 3, 4 */ + base = PB_STATUS_FAN34_BASE + page; + else + base = PB_STATUS_FAN_BASE + page; + ret = pmbus_add_boolean(data, "fan", + "alarm", index, NULL, NULL, base, + PB_FAN_FAN1_WARNING >> (f & 1)); + if (ret) + return ret; + ret = pmbus_add_boolean(data, "fan", + "fault", index, NULL, NULL, base, + PB_FAN_FAN1_FAULT >> (f & 1)); + if (ret) + return ret; + } + index++; + } + } + return 0; +} + +static int pmbus_find_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + int ret; + + /* Voltage sensors */ + ret = pmbus_add_sensor_attrs(client, data, "in", voltage_attributes, + ARRAY_SIZE(voltage_attributes)); + if (ret) + return ret; + + /* Current sensors */ + ret = pmbus_add_sensor_attrs(client, data, "curr", current_attributes, + ARRAY_SIZE(current_attributes)); + if (ret) + return ret; + + /* Power sensors */ + ret = pmbus_add_sensor_attrs(client, data, "power", power_attributes, + ARRAY_SIZE(power_attributes)); + if (ret) + return ret; + + /* Temperature sensors */ + ret = pmbus_add_sensor_attrs(client, data, "temp", temp_attributes, + ARRAY_SIZE(temp_attributes)); + if (ret) + return ret; + + /* Fans */ + ret = pmbus_add_fan_attributes(client, data); + return ret; +} + +/* + * Identify chip parameters. + * This function is called for all chips. + */ +static int pmbus_identify_common(struct i2c_client *client, + struct pmbus_data *data, int page) +{ + int vout_mode = -1; + + if (_pmbus_check_byte_register(client, page, PMBUS_VOUT_MODE)) + { + vout_mode = _pmbus_read_byte_data(client, page, + PMBUS_VOUT_MODE); + } + + if (vout_mode >= 0 && vout_mode != 0xff) { + /* + * Not all chips support the VOUT_MODE command, + * so a failure to read it is not an error. + */ + switch (vout_mode >> 5) { + case 0: /* linear mode */ + if (data->info->format[PSC_VOLTAGE_OUT] != linear) + return -ENODEV; + + data->exponent[page] = ((s8)(vout_mode << 3)) >> 3; + break; + case 1: /* VID mode */ + if (data->info->format[PSC_VOLTAGE_OUT] != vid) + return -ENODEV; + break; + case 2: /* direct mode */ + if (data->info->format[PSC_VOLTAGE_OUT] != direct) + return -ENODEV; + break; + default: + return -ENODEV; + } + } + + pmbus_clear_fault_page(client, page); + return 0; +} + +static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data, + struct pmbus_driver_info *info) +{ + struct device *dev = &client->dev; + int page, ret; + + /* + * Some PMBus chips don't support PMBUS_STATUS_BYTE, so try + * to use PMBUS_STATUS_WORD instead if that is the case. + * Bail out if both registers are not supported. + */ + if(0) { /*Skip this for the i2c access may fail if PSU is not powered.*/ + data->status_register = PMBUS_STATUS_BYTE; + ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE); + if (ret < 0 || ret == 0xff) { + data->status_register = PMBUS_STATUS_WORD; + ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD); + if (ret < 0 || ret == 0xffff) { + dev_err(dev, "PMBus status register not found\n"); + return -ENODEV; + } + } + } + _pmbus_clear_faults(client); + + if (info->identify) { + ret = (*info->identify)(client, info); + if (ret < 0) { + dev_err(dev, "Chip identification failed\n"); + return ret; + } + } + + if (info->pages <= 0 || info->pages > PMBUS_PAGES) { + dev_err(dev, "Bad number of PMBus pages: %d\n", info->pages); + return -ENODEV; + } + + for (page = 0; page < info->pages; page++) { + ret = pmbus_identify_common(client, data, page); + if (ret < 0) { + dev_err(dev, "Failed to identify chip capabilities\n"); + return ret; + } + } + return 0; +} + +int _pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info) +{ + struct device *dev = &client->dev; + struct pmbus_data *data; + int ret; + + if (!info) + return -ENODEV; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->dev = dev; + + if (limited_models(id)) + { + data->flags |= PMBUS_SKIP_STATUS_CHECK; + info->pages = 1; + info->fan_num = 1; + data->linear_16 = 0; + } + else + { + info->pages = id->driver_data; + info->fan_num = 4; + data->linear_16 = 1; + + } + + data->info = info; + + ret = pmbus_init_common(client, data, info); + if (ret < 0) + return ret; + + ret = pmbus_find_attributes(client, data); + if (ret) + goto out_kfree; + + /* + * If there are no attributes, something is wrong. + * Bail out instead of trying to register nothing. + */ + if (!data->num_attributes) { + dev_err(dev, "No attributes found\n"); + ret = -ENODEV; + goto out_kfree; + } + + data->groups[0] = &data->group; + data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name, + data, data->groups); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + dev_err(dev, "Failed to register hwmon device\n"); + goto out_kfree; + } + return 0; + +out_kfree: + kfree(data->group.attrs); + return ret; +} + +/* + * Find sensor groups and status registers on each page. + */ +static void pmbus_find_sensor_groups(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int page; + + /* For i2c might not available when this driver installing, + turn on all attributes but VMON and FAN34.*/ + info->func[0] |= 0x1feff; + return ; + + + /* Sensors detected on page 0 only */ + if (_pmbus_check_word_register(client, 0, PMBUS_READ_VIN)) + info->func[0] |= PMBUS_HAVE_VIN; + if (_pmbus_check_word_register(client, 0, PMBUS_READ_VCAP)) + info->func[0] |= PMBUS_HAVE_VCAP; + if (_pmbus_check_word_register(client, 0, PMBUS_READ_IIN)) + info->func[0] |= PMBUS_HAVE_IIN; + if (_pmbus_check_word_register(client, 0, PMBUS_READ_PIN)) + info->func[0] |= PMBUS_HAVE_PIN; + if (info->func[0] + && _pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) + info->func[0] |= PMBUS_HAVE_STATUS_INPUT; + if (info->fan_num > 0) + { + if (_pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && + _pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { + info->func[0] |= PMBUS_HAVE_FAN12; + if (_pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) + info->func[0] |= PMBUS_HAVE_STATUS_FAN12; + } + } + if (info->fan_num > 2) + { + if (_pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) && + _pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { + info->func[0] |= PMBUS_HAVE_FAN34; + if (_pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) + info->func[0] |= PMBUS_HAVE_STATUS_FAN34; + } + } + + if (_pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) + info->func[0] |= PMBUS_HAVE_TEMP; + if (_pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) + info->func[0] |= PMBUS_HAVE_TEMP2; + if (_pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) + info->func[0] |= PMBUS_HAVE_TEMP3; + + if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_TEMP3) + && _pmbus_check_byte_register(client, 0, + PMBUS_STATUS_TEMPERATURE)) + info->func[0] |= PMBUS_HAVE_STATUS_TEMP; + + /* Sensors detected on all pages */ + for (page = 0; page < info->pages; page++) { + if (_pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) { + info->func[page] |= PMBUS_HAVE_VOUT; + if (_pmbus_check_byte_register(client, page, + PMBUS_STATUS_VOUT)) + info->func[page] |= PMBUS_HAVE_STATUS_VOUT; + } + if (_pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) { + info->func[page] |= PMBUS_HAVE_IOUT; + if (_pmbus_check_byte_register(client, 0, + PMBUS_STATUS_IOUT)) + info->func[page] |= PMBUS_HAVE_STATUS_IOUT; + } + if (_pmbus_check_word_register(client, page, PMBUS_READ_POUT)) + info->func[page] |= PMBUS_HAVE_POUT; + } +} + +/* + * Identify chip parameters. + */ +static int pmbus_identify(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int ret = 0; + + if (!info->pages) { + /* + * Check if the PAGE command is supported. If it is, + * keep setting the page number until it fails or until the + * maximum number of pages has been reached. Assume that + * this is the number of pages supported by the chip. + */ + if (_pmbus_check_byte_register(client, 0, PMBUS_PAGE)) { + int page; + + for (page = 1; page < PMBUS_PAGES; page++) { + if (_pmbus_set_page(client, page) < 0) + break; + } + _pmbus_set_page(client, 0); + info->pages = page; + } else { + info->pages = 1; + } + } + + if (_pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) { + int vout_mode; + + vout_mode = _pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); + if (vout_mode >= 0 && vout_mode != 0xff) { + switch (vout_mode >> 5) { + case 0: + break; + case 1: + info->format[PSC_VOLTAGE_OUT] = vid; + break; + case 2: + info->format[PSC_VOLTAGE_OUT] = direct; + break; + default: + ret = -ENODEV; + goto abort; + } + } + } + + + /* + * We should check if the COEFFICIENTS register is supported. + * If it is, and the chip is configured for direct mode, we can read + * the coefficients from the chip, one set per group of sensor + * registers. + * + * To do this, we will need access to a chip which actually supports the + * COEFFICIENTS command, since the command is too complex to implement + * without testing it. Until then, abort if a chip configured for direct + * mode was detected. + */ + if (info->format[PSC_VOLTAGE_OUT] == direct) { + ret = -ENODEV; + goto abort; + } + + /* Try to find sensor groups */ + pmbus_find_sensor_groups(client, info); +abort: + return ret; +} + +/* + * Use driver_data to set the number of pages supported by the chip. + */ +static const struct i2c_device_id pmbus_id[] = { + { "accton_ym2651", YM2651 }, + { "accton_ym2401", YM2401 }, + { "accton_ym2851", YM2851 }, + {} +}; + +static int limited_models(const struct i2c_device_id *id) +{ + int j; + + if (!id->name) + return 0; + + for (j = 0; j < ARRAY_SIZE(pmbus_id); j++) { + if (!pmbus_id[j].name) + continue; + + if (!strcmp(id->name, pmbus_id[j].name)) + { + if(id->driver_data < LIMITED_CHIPS) + { + return 1; + } + else + { + return 0; + } + } + + } + + return 0; +} + +static int pmbus_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pmbus_driver_info *info; + + info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->identify = pmbus_identify; + + return _pmbus_do_probe(client, id, info); +} + +int _pmbus_do_remove(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + kfree(data->group.attrs); + return 0; +} + +MODULE_DEVICE_TABLE(i2c, pmbus_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver pmbus_driver = { + .driver = { + .name = "accton_pmbus_3y", + }, + .probe = pmbus_probe, + .remove = _pmbus_do_remove, + .id_table = pmbus_id, +}; + +module_i2c_driver(pmbus_driver); + +MODULE_AUTHOR("Roy Lee"); +MODULE_DESCRIPTION("Accton PMBus driver for 3Y Power YM-2651Y."); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-accton/common/modules/cpr_4011_4mxx.c b/platform/broadcom/sonic-platform-modules-accton/common/modules/cpr_4011_4mxx.c new file mode 100644 index 000000000000..2cea5f5e39f9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/common/modules/cpr_4011_4mxx.c @@ -0,0 +1,402 @@ +/* + * An hwmon driver for the CPR-4011-4Mxx Redundant Power Module + * + * Copyright (C) Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_FAN_DUTY_CYCLE 100 + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x3c, 0x3d, 0x3e, 0x3f, I2C_CLIENT_END }; + +/* Each client has this additional data + */ +struct cpr_4011_4mxx_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 vout_mode; /* Register value */ + u16 v_in; /* Register value */ + u16 v_out; /* Register value */ + u16 i_in; /* Register value */ + u16 i_out; /* Register value */ + u16 p_in; /* Register value */ + u16 p_out; /* Register value */ + u16 temp_input[2]; /* Register value */ + u8 fan_fault; /* Register value */ + u16 fan_duty_cycle[2]; /* Register value */ + u16 fan_speed[2]; /* Register value */ +}; + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t show_vout(struct device *dev, struct device_attribute *da, char *buf); +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, const char *buf, size_t count); +static int cpr_4011_4mxx_write_word(struct i2c_client *client, u8 reg, u16 value); +static struct cpr_4011_4mxx_data *cpr_4011_4mxx_update_device(struct device *dev); + +enum cpr_4011_4mxx_sysfs_attributes { + PSU_V_IN, + PSU_V_OUT, + PSU_I_IN, + PSU_I_OUT, + PSU_P_IN, + PSU_P_OUT, + PSU_TEMP1_INPUT, + PSU_FAN1_FAULT, + PSU_FAN1_DUTY_CYCLE, + PSU_FAN1_SPEED, +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_v_in, S_IRUGO, show_linear, NULL, PSU_V_IN); +static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, show_vout, NULL, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(psu_i_in, S_IRUGO, show_linear, NULL, PSU_I_IN); +static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, show_linear, NULL, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(psu_p_in, S_IRUGO, show_linear, NULL, PSU_P_IN); +static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, show_linear, NULL, PSU_P_OUT); +static SENSOR_DEVICE_ATTR(psu_temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IRUGO, show_fan_fault, NULL, PSU_FAN1_FAULT); +static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, show_linear, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE); +static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); + +static struct attribute *cpr_4011_4mxx_attributes[] = { + &sensor_dev_attr_psu_v_in.dev_attr.attr, + &sensor_dev_attr_psu_v_out.dev_attr.attr, + &sensor_dev_attr_psu_i_in.dev_attr.attr, + &sensor_dev_attr_psu_i_out.dev_attr.attr, + &sensor_dev_attr_psu_p_in.dev_attr.attr, + &sensor_dev_attr_psu_p_out.dev_attr.attr, + &sensor_dev_attr_psu_temp1_input.dev_attr.attr, + &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, + &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, + &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, + NULL +}; + +static int two_complement_to_int(u16 data, u8 valid_bit, int mask) +{ + u16 valid_data = data & mask; + bool is_negative = valid_data >> (valid_bit - 1); + + return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data; +} + +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpr_4011_4mxx_data *data = i2c_get_clientdata(client); + int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1; + long speed; + int error; + + error = kstrtol(buf, 10, &speed); + if (error) + return error; + + if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->fan_duty_cycle[nr] = speed; + cpr_4011_4mxx_write_word(client, 0x3B + nr, data->fan_duty_cycle[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct cpr_4011_4mxx_data *data = cpr_4011_4mxx_update_device(dev); + + u16 value = 0; + int exponent, mantissa; + int multiplier = 1000; + + switch (attr->index) { + case PSU_V_IN: + value = data->v_in; + break; + case PSU_I_IN: + value = data->i_in; + break; + case PSU_I_OUT: + value = data->i_out; + break; + case PSU_P_IN: + value = data->p_in; + break; + case PSU_P_OUT: + value = data->p_out; + break; + case PSU_TEMP1_INPUT: + value = data->temp_input[0]; + break; + case PSU_FAN1_DUTY_CYCLE: + multiplier = 1; + value = data->fan_duty_cycle[0]; + break; + case PSU_FAN1_SPEED: + multiplier = 1; + value = data->fan_speed[0]; + break; + default: + break; + } + + exponent = two_complement_to_int(value >> 11, 5, 0x1f); + mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff); + + return (exponent >= 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct cpr_4011_4mxx_data *data = cpr_4011_4mxx_update_device(dev); + + u8 shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6; + + return sprintf(buf, "%d\n", data->fan_fault >> shift); +} + +static ssize_t show_vout(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct cpr_4011_4mxx_data *data = cpr_4011_4mxx_update_device(dev); + int exponent, mantissa; + int multiplier = 1000; + + exponent = two_complement_to_int(data->vout_mode, 5, 0x1f); + mantissa = data->v_out; + + return (exponent > 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static const struct attribute_group cpr_4011_4mxx_group = { + .attrs = cpr_4011_4mxx_attributes, +}; + +static int cpr_4011_4mxx_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct cpr_4011_4mxx_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct cpr_4011_4mxx_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + data->valid = 0; + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &cpr_4011_4mxx_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &cpr_4011_4mxx_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int cpr_4011_4mxx_remove(struct i2c_client *client) +{ + struct cpr_4011_4mxx_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &cpr_4011_4mxx_group); + kfree(data); + + return 0; +} + +static const struct i2c_device_id cpr_4011_4mxx_id[] = { + { "cpr_4011_4mxx", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cpr_4011_4mxx_id); + +static struct i2c_driver cpr_4011_4mxx_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "cpr_4011_4mxx", + }, + .probe = cpr_4011_4mxx_probe, + .remove = cpr_4011_4mxx_remove, + .id_table = cpr_4011_4mxx_id, + .address_list = normal_i2c, +}; + +static int cpr_4011_4mxx_read_byte(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int cpr_4011_4mxx_read_word(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_data(client, reg); +} + +static int cpr_4011_4mxx_write_word(struct i2c_client *client, u8 reg, u16 value) +{ + return i2c_smbus_write_word_data(client, reg, value); +} + +struct reg_data_byte { + u8 reg; + u8 *value; +}; + +struct reg_data_word { + u8 reg; + u16 *value; +}; + +static struct cpr_4011_4mxx_data *cpr_4011_4mxx_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpr_4011_4mxx_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i, status; + struct reg_data_byte regs_byte[] = { {0x20, &data->vout_mode}, + {0x81, &data->fan_fault} + }; + struct reg_data_word regs_word[] = { {0x88, &data->v_in}, + {0x8b, &data->v_out}, + {0x89, &data->i_in}, + {0x8c, &data->i_out}, + {0x96, &data->p_out}, + {0x97, &data->p_in}, + {0x8d, &(data->temp_input[0])}, + {0x8e, &(data->temp_input[1])}, + {0x3b, &(data->fan_duty_cycle[0])}, + {0x3c, &(data->fan_duty_cycle[1])}, + {0x90, &(data->fan_speed[0])}, + {0x91, &(data->fan_speed[1])} + }; + + dev_dbg(&client->dev, "Starting cpr_4011_4mxx update\n"); + + /* Read byte data */ + for (i = 0; i < ARRAY_SIZE(regs_byte); i++) { + status = cpr_4011_4mxx_read_byte(client, regs_byte[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_byte[i].reg, status); + } + else { + *(regs_byte[i].value) = status; + } + } + + /* Read word data */ + for (i = 0; i < ARRAY_SIZE(regs_word); i++) { + status = cpr_4011_4mxx_read_word(client, regs_word[i].reg); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_word[i].reg, status); + } + else { + *(regs_word[i].value) = status; + } + } + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +static int __init cpr_4011_4mxx_init(void) +{ + return i2c_add_driver(&cpr_4011_4mxx_driver); +} + +static void __exit cpr_4011_4mxx_exit(void) +{ + i2c_del_driver(&cpr_4011_4mxx_driver); +} + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("CPR_4011_4MXX driver"); +MODULE_LICENSE("GPL"); + +module_init(cpr_4011_4mxx_init); +module_exit(cpr_4011_4mxx_exit); diff --git a/platform/broadcom/sonic-platform-modules-accton/common/modules/pmbus.h b/platform/broadcom/sonic-platform-modules-accton/common/modules/pmbus.h new file mode 100644 index 000000000000..cb6dbc34d87c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/common/modules/pmbus.h @@ -0,0 +1,389 @@ +/* + * pmbus.h - Common defines and structures for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * Copyright (c) 2012 Guenter Roeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef PMBUS_H +#define PMBUS_H + +/* + * Registers + */ +#define PMBUS_PAGE 0x00 +#define PMBUS_OPERATION 0x01 +#define PMBUS_ON_OFF_CONFIG 0x02 +#define PMBUS_CLEAR_FAULTS 0x03 +#define PMBUS_PHASE 0x04 + +#define PMBUS_CAPABILITY 0x19 +#define PMBUS_QUERY 0x1A + +#define PMBUS_VOUT_MODE 0x20 +#define PMBUS_VOUT_COMMAND 0x21 +#define PMBUS_VOUT_TRIM 0x22 +#define PMBUS_VOUT_CAL_OFFSET 0x23 +#define PMBUS_VOUT_MAX 0x24 +#define PMBUS_VOUT_MARGIN_HIGH 0x25 +#define PMBUS_VOUT_MARGIN_LOW 0x26 +#define PMBUS_VOUT_TRANSITION_RATE 0x27 +#define PMBUS_VOUT_DROOP 0x28 +#define PMBUS_VOUT_SCALE_LOOP 0x29 +#define PMBUS_VOUT_SCALE_MONITOR 0x2A + +#define PMBUS_COEFFICIENTS 0x30 +#define PMBUS_POUT_MAX 0x31 + +#define PMBUS_FAN_CONFIG_12 0x3A +#define PMBUS_FAN_COMMAND_1 0x3B +#define PMBUS_FAN_COMMAND_2 0x3C +#define PMBUS_FAN_CONFIG_34 0x3D +#define PMBUS_FAN_COMMAND_3 0x3E +#define PMBUS_FAN_COMMAND_4 0x3F + +#define PMBUS_VOUT_OV_FAULT_LIMIT 0x40 +#define PMBUS_VOUT_OV_FAULT_RESPONSE 0x41 +#define PMBUS_VOUT_OV_WARN_LIMIT 0x42 +#define PMBUS_VOUT_UV_WARN_LIMIT 0x43 +#define PMBUS_VOUT_UV_FAULT_LIMIT 0x44 +#define PMBUS_VOUT_UV_FAULT_RESPONSE 0x45 +#define PMBUS_IOUT_OC_FAULT_LIMIT 0x46 +#define PMBUS_IOUT_OC_FAULT_RESPONSE 0x47 +#define PMBUS_IOUT_OC_LV_FAULT_LIMIT 0x48 +#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE 0x49 +#define PMBUS_IOUT_OC_WARN_LIMIT 0x4A +#define PMBUS_IOUT_UC_FAULT_LIMIT 0x4B +#define PMBUS_IOUT_UC_FAULT_RESPONSE 0x4C + +#define PMBUS_OT_FAULT_LIMIT 0x4F +#define PMBUS_OT_FAULT_RESPONSE 0x50 +#define PMBUS_OT_WARN_LIMIT 0x51 +#define PMBUS_UT_WARN_LIMIT 0x52 +#define PMBUS_UT_FAULT_LIMIT 0x53 +#define PMBUS_UT_FAULT_RESPONSE 0x54 +#define PMBUS_VIN_OV_FAULT_LIMIT 0x55 +#define PMBUS_VIN_OV_FAULT_RESPONSE 0x56 +#define PMBUS_VIN_OV_WARN_LIMIT 0x57 +#define PMBUS_VIN_UV_WARN_LIMIT 0x58 +#define PMBUS_VIN_UV_FAULT_LIMIT 0x59 + +#define PMBUS_IIN_OC_FAULT_LIMIT 0x5B +#define PMBUS_IIN_OC_WARN_LIMIT 0x5D + +#define PMBUS_POUT_OP_FAULT_LIMIT 0x68 +#define PMBUS_POUT_OP_WARN_LIMIT 0x6A +#define PMBUS_PIN_OP_WARN_LIMIT 0x6B + +#define PMBUS_STATUS_BYTE 0x78 +#define PMBUS_STATUS_WORD 0x79 +#define PMBUS_STATUS_VOUT 0x7A +#define PMBUS_STATUS_IOUT 0x7B +#define PMBUS_STATUS_INPUT 0x7C +#define PMBUS_STATUS_TEMPERATURE 0x7D +#define PMBUS_STATUS_CML 0x7E +#define PMBUS_STATUS_OTHER 0x7F +#define PMBUS_STATUS_MFR_SPECIFIC 0x80 +#define PMBUS_STATUS_FAN_12 0x81 +#define PMBUS_STATUS_FAN_34 0x82 + +#define PMBUS_READ_VIN 0x88 +#define PMBUS_READ_IIN 0x89 +#define PMBUS_READ_VCAP 0x8A +#define PMBUS_READ_VOUT 0x8B +#define PMBUS_READ_IOUT 0x8C +#define PMBUS_READ_TEMPERATURE_1 0x8D +#define PMBUS_READ_TEMPERATURE_2 0x8E +#define PMBUS_READ_TEMPERATURE_3 0x8F +#define PMBUS_READ_FAN_SPEED_1 0x90 +#define PMBUS_READ_FAN_SPEED_2 0x91 +#define PMBUS_READ_FAN_SPEED_3 0x92 +#define PMBUS_READ_FAN_SPEED_4 0x93 +#define PMBUS_READ_DUTY_CYCLE 0x94 +#define PMBUS_READ_FREQUENCY 0x95 +#define PMBUS_READ_POUT 0x96 +#define PMBUS_READ_PIN 0x97 + +#define PMBUS_REVISION 0x98 +#define PMBUS_MFR_ID 0x99 +#define PMBUS_MFR_MODEL 0x9A +#define PMBUS_MFR_REVISION 0x9B +#define PMBUS_MFR_LOCATION 0x9C +#define PMBUS_MFR_DATE 0x9D +#define PMBUS_MFR_SERIAL 0x9E + +/* + * Virtual registers. + * Useful to support attributes which are not supported by standard PMBus + * registers but exist as manufacturer specific registers on individual chips. + * Must be mapped to real registers in device specific code. + * + * Semantics: + * Virtual registers are all word size. + * READ registers are read-only; writes are either ignored or return an error. + * RESET registers are read/write. Reading reset registers returns zero + * (used for detection), writing any value causes the associated history to be + * reset. + * Virtual registers have to be handled in device specific driver code. Chip + * driver code returns non-negative register values if a virtual register is + * supported, or a negative error code if not. The chip driver may return + * -ENODATA or any other error code in this case, though an error code other + * than -ENODATA is handled more efficiently and thus preferred. Either case, + * the calling PMBus core code will abort if the chip driver returns an error + * code when reading or writing virtual registers. + */ +#define PMBUS_VIRT_BASE 0x100 +#define PMBUS_VIRT_READ_TEMP_AVG (PMBUS_VIRT_BASE + 0) +#define PMBUS_VIRT_READ_TEMP_MIN (PMBUS_VIRT_BASE + 1) +#define PMBUS_VIRT_READ_TEMP_MAX (PMBUS_VIRT_BASE + 2) +#define PMBUS_VIRT_RESET_TEMP_HISTORY (PMBUS_VIRT_BASE + 3) +#define PMBUS_VIRT_READ_VIN_AVG (PMBUS_VIRT_BASE + 4) +#define PMBUS_VIRT_READ_VIN_MIN (PMBUS_VIRT_BASE + 5) +#define PMBUS_VIRT_READ_VIN_MAX (PMBUS_VIRT_BASE + 6) +#define PMBUS_VIRT_RESET_VIN_HISTORY (PMBUS_VIRT_BASE + 7) +#define PMBUS_VIRT_READ_IIN_AVG (PMBUS_VIRT_BASE + 8) +#define PMBUS_VIRT_READ_IIN_MIN (PMBUS_VIRT_BASE + 9) +#define PMBUS_VIRT_READ_IIN_MAX (PMBUS_VIRT_BASE + 10) +#define PMBUS_VIRT_RESET_IIN_HISTORY (PMBUS_VIRT_BASE + 11) +#define PMBUS_VIRT_READ_PIN_AVG (PMBUS_VIRT_BASE + 12) +#define PMBUS_VIRT_READ_PIN_MAX (PMBUS_VIRT_BASE + 13) +#define PMBUS_VIRT_RESET_PIN_HISTORY (PMBUS_VIRT_BASE + 14) +#define PMBUS_VIRT_READ_POUT_AVG (PMBUS_VIRT_BASE + 15) +#define PMBUS_VIRT_READ_POUT_MAX (PMBUS_VIRT_BASE + 16) +#define PMBUS_VIRT_RESET_POUT_HISTORY (PMBUS_VIRT_BASE + 17) +#define PMBUS_VIRT_READ_VOUT_AVG (PMBUS_VIRT_BASE + 18) +#define PMBUS_VIRT_READ_VOUT_MIN (PMBUS_VIRT_BASE + 19) +#define PMBUS_VIRT_READ_VOUT_MAX (PMBUS_VIRT_BASE + 20) +#define PMBUS_VIRT_RESET_VOUT_HISTORY (PMBUS_VIRT_BASE + 21) +#define PMBUS_VIRT_READ_IOUT_AVG (PMBUS_VIRT_BASE + 22) +#define PMBUS_VIRT_READ_IOUT_MIN (PMBUS_VIRT_BASE + 23) +#define PMBUS_VIRT_READ_IOUT_MAX (PMBUS_VIRT_BASE + 24) +#define PMBUS_VIRT_RESET_IOUT_HISTORY (PMBUS_VIRT_BASE + 25) +#define PMBUS_VIRT_READ_TEMP2_AVG (PMBUS_VIRT_BASE + 26) +#define PMBUS_VIRT_READ_TEMP2_MIN (PMBUS_VIRT_BASE + 27) +#define PMBUS_VIRT_READ_TEMP2_MAX (PMBUS_VIRT_BASE + 28) +#define PMBUS_VIRT_RESET_TEMP2_HISTORY (PMBUS_VIRT_BASE + 29) + +#define PMBUS_VIRT_READ_VMON (PMBUS_VIRT_BASE + 30) +#define PMBUS_VIRT_VMON_UV_WARN_LIMIT (PMBUS_VIRT_BASE + 31) +#define PMBUS_VIRT_VMON_OV_WARN_LIMIT (PMBUS_VIRT_BASE + 32) +#define PMBUS_VIRT_VMON_UV_FAULT_LIMIT (PMBUS_VIRT_BASE + 33) +#define PMBUS_VIRT_VMON_OV_FAULT_LIMIT (PMBUS_VIRT_BASE + 34) +#define PMBUS_VIRT_STATUS_VMON (PMBUS_VIRT_BASE + 35) + +/* + * CAPABILITY + */ +#define PB_CAPABILITY_SMBALERT (1<<4) +#define PB_CAPABILITY_ERROR_CHECK (1<<7) + +/* + * VOUT_MODE + */ +#define PB_VOUT_MODE_MODE_MASK 0xe0 +#define PB_VOUT_MODE_PARAM_MASK 0x1f + +#define PB_VOUT_MODE_LINEAR 0x00 +#define PB_VOUT_MODE_VID 0x20 +#define PB_VOUT_MODE_DIRECT 0x40 + +/* + * Fan configuration + */ +#define PB_FAN_2_PULSE_MASK ((1 << 0) | (1 << 1)) +#define PB_FAN_2_RPM (1 << 2) +#define PB_FAN_2_INSTALLED (1 << 3) +#define PB_FAN_1_PULSE_MASK ((1 << 4) | (1 << 5)) +#define PB_FAN_1_RPM (1 << 6) +#define PB_FAN_1_INSTALLED (1 << 7) + +/* + * STATUS_BYTE, STATUS_WORD (lower) + */ +#define PB_STATUS_NONE_ABOVE (1<<0) +#define PB_STATUS_CML (1<<1) +#define PB_STATUS_TEMPERATURE (1<<2) +#define PB_STATUS_VIN_UV (1<<3) +#define PB_STATUS_IOUT_OC (1<<4) +#define PB_STATUS_VOUT_OV (1<<5) +#define PB_STATUS_OFF (1<<6) +#define PB_STATUS_BUSY (1<<7) + +/* + * STATUS_WORD (upper) + */ +#define PB_STATUS_UNKNOWN (1<<8) +#define PB_STATUS_OTHER (1<<9) +#define PB_STATUS_FANS (1<<10) +#define PB_STATUS_POWER_GOOD_N (1<<11) +#define PB_STATUS_WORD_MFR (1<<12) +#define PB_STATUS_INPUT (1<<13) +#define PB_STATUS_IOUT_POUT (1<<14) +#define PB_STATUS_VOUT (1<<15) + +/* + * STATUS_IOUT + */ +#define PB_POUT_OP_WARNING (1<<0) +#define PB_POUT_OP_FAULT (1<<1) +#define PB_POWER_LIMITING (1<<2) +#define PB_CURRENT_SHARE_FAULT (1<<3) +#define PB_IOUT_UC_FAULT (1<<4) +#define PB_IOUT_OC_WARNING (1<<5) +#define PB_IOUT_OC_LV_FAULT (1<<6) +#define PB_IOUT_OC_FAULT (1<<7) + +/* + * STATUS_VOUT, STATUS_INPUT + */ +#define PB_VOLTAGE_UV_FAULT (1<<4) +#define PB_VOLTAGE_UV_WARNING (1<<5) +#define PB_VOLTAGE_OV_WARNING (1<<6) +#define PB_VOLTAGE_OV_FAULT (1<<7) + +/* + * STATUS_INPUT + */ +#define PB_PIN_OP_WARNING (1<<0) +#define PB_IIN_OC_WARNING (1<<1) +#define PB_IIN_OC_FAULT (1<<2) + +/* + * STATUS_TEMPERATURE + */ +#define PB_TEMP_UT_FAULT (1<<4) +#define PB_TEMP_UT_WARNING (1<<5) +#define PB_TEMP_OT_WARNING (1<<6) +#define PB_TEMP_OT_FAULT (1<<7) + +/* + * STATUS_FAN + */ +#define PB_FAN_AIRFLOW_WARNING (1<<0) +#define PB_FAN_AIRFLOW_FAULT (1<<1) +#define PB_FAN_FAN2_SPEED_OVERRIDE (1<<2) +#define PB_FAN_FAN1_SPEED_OVERRIDE (1<<3) +#define PB_FAN_FAN2_WARNING (1<<4) +#define PB_FAN_FAN1_WARNING (1<<5) +#define PB_FAN_FAN2_FAULT (1<<6) +#define PB_FAN_FAN1_FAULT (1<<7) + +/* + * CML_FAULT_STATUS + */ +#define PB_CML_FAULT_OTHER_MEM_LOGIC (1<<0) +#define PB_CML_FAULT_OTHER_COMM (1<<1) +#define PB_CML_FAULT_PROCESSOR (1<<3) +#define PB_CML_FAULT_MEMORY (1<<4) +#define PB_CML_FAULT_PACKET_ERROR (1<<5) +#define PB_CML_FAULT_INVALID_DATA (1<<6) +#define PB_CML_FAULT_INVALID_COMMAND (1<<7) + +enum pmbus_sensor_classes { + PSC_VOLTAGE_IN = 0, + PSC_VOLTAGE_OUT, + PSC_CURRENT_IN, + PSC_CURRENT_OUT, + PSC_POWER, + PSC_TEMPERATURE, + PSC_FAN, + PSC_NUM_CLASSES /* Number of power sensor classes */ +}; + +#define PMBUS_PAGES 32 /* Per PMBus specification */ + +/* Functionality bit mask */ +#define PMBUS_HAVE_VIN (1 << 0) +#define PMBUS_HAVE_VCAP (1 << 1) +#define PMBUS_HAVE_VOUT (1 << 2) +#define PMBUS_HAVE_IIN (1 << 3) +#define PMBUS_HAVE_IOUT (1 << 4) +#define PMBUS_HAVE_PIN (1 << 5) +#define PMBUS_HAVE_POUT (1 << 6) +#define PMBUS_HAVE_FAN12 (1 << 7) +#define PMBUS_HAVE_FAN34 (1 << 8) +#define PMBUS_HAVE_TEMP (1 << 9) +#define PMBUS_HAVE_TEMP2 (1 << 10) +#define PMBUS_HAVE_TEMP3 (1 << 11) +#define PMBUS_HAVE_STATUS_VOUT (1 << 12) +#define PMBUS_HAVE_STATUS_IOUT (1 << 13) +#define PMBUS_HAVE_STATUS_INPUT (1 << 14) +#define PMBUS_HAVE_STATUS_TEMP (1 << 15) +#define PMBUS_HAVE_STATUS_FAN12 (1 << 16) +#define PMBUS_HAVE_STATUS_FAN34 (1 << 17) +#define PMBUS_HAVE_VMON (1 << 18) +#define PMBUS_HAVE_STATUS_VMON (1 << 19) + +enum pmbus_data_format { linear = 0, direct, vid }; + +struct pmbus_driver_info { + int pages; /* Total number of pages */ + enum pmbus_data_format format[PSC_NUM_CLASSES]; + /* + * Support one set of coefficients for each sensor type + * Used for chips providing data in direct mode. + */ + int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */ + int b[PSC_NUM_CLASSES]; /* offset */ + int R[PSC_NUM_CLASSES]; /* exponent */ + + u32 func[PMBUS_PAGES]; /* Functionality, per page */ + /* + * The following functions map manufacturing specific register values + * to PMBus standard register values. Specify only if mapping is + * necessary. + * Functions return the register value (read) or zero (write) if + * successful. A return value of -ENODATA indicates that there is no + * manufacturer specific register, but that a standard PMBus register + * may exist. Any other negative return value indicates that the + * register does not exist, and that no attempt should be made to read + * the standard register. + */ + int (*read_byte_data)(struct i2c_client *client, int page, int reg); + int (*read_word_data)(struct i2c_client *client, int page, int reg); + int (*write_word_data)(struct i2c_client *client, int page, int reg, + u16 word); + int (*write_byte)(struct i2c_client *client, int page, u8 value); + /* + * The identify function determines supported PMBus functionality. + * This function is only necessary if a chip driver supports multiple + * chips, and the chip functionality is not pre-determined. + */ + int (*identify)(struct i2c_client *client, + struct pmbus_driver_info *info); + + int fan_num; +}; + +/* Function declarations */ + +void pmbus_clear_cache(struct i2c_client *client); +int pmbus_set_page(struct i2c_client *client, u8 page); +int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); +int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word); +int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg); +int pmbus_write_byte(struct i2c_client *client, int page, u8 value); +void _pmbus_clear_faults(struct i2c_client *client); +bool _pmbus_check_byte_register(struct i2c_client *client, int page, int reg); +bool _pmbus_check_word_register(struct i2c_client *client, int page, int reg); +int _pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info); +int pmbus_do_remove(struct i2c_client *client); +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client + *client); + +#endif /* PMBUS_H */ diff --git a/platform/broadcom/sonic-platform-modules-accton/common/modules/ym2651y.c b/platform/broadcom/sonic-platform-modules-accton/common/modules/ym2651y.c new file mode 100644 index 000000000000..47e6a1d06bc5 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/common/modules/ym2651y.c @@ -0,0 +1,619 @@ +/* + * An hwmon driver for the 3Y Power YM-2651Y Power Module + * + * Copyright (C) 2014 Accton Technology Corporation. + * Brandon Chuang + * + * Based on ad7414.c + * Copyright 2006 Stefan Roese , DENX Software Engineering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_FAN_DUTY_CYCLE 100 + +/* Addresses scanned + */ +static const unsigned short normal_i2c[] = { 0x58, 0x5b, I2C_CLIENT_END }; + +enum chips { + YM2651, + YM2401, + YM2851, +}; + +/* Each client has this additional data + */ +struct ym2651y_data { + struct device *hwmon_dev; + struct mutex update_lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 capability; /* Register value */ + u16 status_word; /* Register value */ + u8 fan_fault; /* Register value */ + u8 over_temp; /* Register value */ + u16 v_out; /* Register value */ + u16 i_out; /* Register value */ + u16 p_out; /* Register value */ + u16 temp; /* Register value */ + u16 fan_speed; /* Register value */ + u16 fan_duty_cycle[2]; /* Register value */ + u8 fan_dir[4]; /* Register value */ + u8 pmbus_revision; /* Register value */ + u8 mfr_id[10]; /* Register value */ + u8 mfr_model[10]; /* Register value */ + u8 mfr_revsion[3]; /* Register value */ + u16 mfr_vin_min; /* Register value */ + u16 mfr_vin_max; /* Register value */ + u16 mfr_iin_max; /* Register value */ + u16 mfr_iout_max; /* Register value */ + u16 mfr_pin_max; /* Register value */ + u16 mfr_pout_max; /* Register value */ + u16 mfr_vout_min; /* Register value */ + u16 mfr_vout_max; /* Register value */ +}; + +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_word(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, + char *buf); +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf); +static struct ym2651y_data *ym2651y_update_device(struct device *dev); +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count); +static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value); + +enum ym2651y_sysfs_attributes { + PSU_POWER_ON = 0, + PSU_TEMP_FAULT, + PSU_POWER_GOOD, + PSU_FAN1_FAULT, + PSU_FAN_DIRECTION, + PSU_OVER_TEMP, + PSU_V_OUT, + PSU_I_OUT, + PSU_P_OUT, + PSU_P_OUT_UV, /*In Unit of microVolt, instead of mini.*/ + PSU_TEMP1_INPUT, + PSU_FAN1_SPEED, + PSU_FAN1_DUTY_CYCLE, + PSU_PMBUS_REVISION, + PSU_MFR_ID, + PSU_MFR_MODEL, + PSU_MFR_REVISION, + PSU_MFR_VIN_MIN, + PSU_MFR_VIN_MAX, + PSU_MFR_VOUT_MIN, + PSU_MFR_VOUT_MAX, + PSU_MFR_IIN_MAX, + PSU_MFR_IOUT_MAX, + PSU_MFR_PIN_MAX, + PSU_MFR_POUT_MAX +}; + +/* sysfs attributes for hwmon + */ +static SENSOR_DEVICE_ATTR(psu_power_on, S_IRUGO, show_word, NULL, PSU_POWER_ON); +static SENSOR_DEVICE_ATTR(psu_temp_fault, S_IRUGO, show_word, NULL, PSU_TEMP_FAULT); +static SENSOR_DEVICE_ATTR(psu_power_good, S_IRUGO, show_word, NULL, PSU_POWER_GOOD); +static SENSOR_DEVICE_ATTR(psu_fan1_fault, S_IRUGO, show_fan_fault, NULL, PSU_FAN1_FAULT); +static SENSOR_DEVICE_ATTR(psu_over_temp, S_IRUGO, show_over_temp, NULL, PSU_OVER_TEMP); +static SENSOR_DEVICE_ATTR(psu_v_out, S_IRUGO, show_linear, NULL, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(psu_i_out, S_IRUGO, show_linear, NULL, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(psu_p_out, S_IRUGO, show_linear, NULL, PSU_P_OUT); +static SENSOR_DEVICE_ATTR(psu_temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(psu_fan1_speed_rpm, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); +static SENSOR_DEVICE_ATTR(psu_fan1_duty_cycle_percentage, S_IWUSR | S_IRUGO, show_linear, set_fan_duty_cycle, PSU_FAN1_DUTY_CYCLE); +static SENSOR_DEVICE_ATTR(psu_fan_dir, S_IRUGO, show_ascii, NULL, PSU_FAN_DIRECTION); +static SENSOR_DEVICE_ATTR(psu_pmbus_revision, S_IRUGO, show_byte, NULL, PSU_PMBUS_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_id, S_IRUGO, show_ascii, NULL, PSU_MFR_ID); +static SENSOR_DEVICE_ATTR(psu_mfr_model, S_IRUGO, show_ascii, NULL, PSU_MFR_MODEL); +static SENSOR_DEVICE_ATTR(psu_mfr_revision, S_IRUGO, show_ascii, NULL, PSU_MFR_REVISION); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_min, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vin_max, S_IRUGO, show_linear, NULL, PSU_MFR_VIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_min, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MIN); +static SENSOR_DEVICE_ATTR(psu_mfr_vout_max, S_IRUGO, show_linear, NULL, PSU_MFR_VOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iin_max, S_IRUGO, show_linear, NULL, PSU_MFR_IIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_iout_max, S_IRUGO, show_linear, NULL, PSU_MFR_IOUT_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pin_max, S_IRUGO, show_linear, NULL, PSU_MFR_PIN_MAX); +static SENSOR_DEVICE_ATTR(psu_mfr_pout_max, S_IRUGO, show_linear, NULL, PSU_MFR_POUT_MAX); + +/*Duplicate nodes for lm-sensors.*/ +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_linear, NULL, PSU_V_OUT); +static SENSOR_DEVICE_ATTR(curr2_input, S_IRUGO, show_linear, NULL, PSU_I_OUT); +static SENSOR_DEVICE_ATTR(power2_input, S_IRUGO, show_linear, NULL, PSU_P_OUT_UV); +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_linear, NULL, PSU_TEMP1_INPUT); +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_linear, NULL, PSU_FAN1_SPEED); +static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_word, NULL, PSU_TEMP_FAULT); + +static struct attribute *ym2651y_attributes[] = { + &sensor_dev_attr_psu_power_on.dev_attr.attr, + &sensor_dev_attr_psu_temp_fault.dev_attr.attr, + &sensor_dev_attr_psu_power_good.dev_attr.attr, + &sensor_dev_attr_psu_fan1_fault.dev_attr.attr, + &sensor_dev_attr_psu_over_temp.dev_attr.attr, + &sensor_dev_attr_psu_v_out.dev_attr.attr, + &sensor_dev_attr_psu_i_out.dev_attr.attr, + &sensor_dev_attr_psu_p_out.dev_attr.attr, + &sensor_dev_attr_psu_temp1_input.dev_attr.attr, + &sensor_dev_attr_psu_fan1_speed_rpm.dev_attr.attr, + &sensor_dev_attr_psu_fan1_duty_cycle_percentage.dev_attr.attr, + &sensor_dev_attr_psu_fan_dir.dev_attr.attr, + &sensor_dev_attr_psu_pmbus_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_id.dev_attr.attr, + &sensor_dev_attr_psu_mfr_model.dev_attr.attr, + &sensor_dev_attr_psu_mfr_revision.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_pin_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_min.dev_attr.attr, + &sensor_dev_attr_psu_mfr_vout_max.dev_attr.attr, + &sensor_dev_attr_psu_mfr_iout_max.dev_attr.attr, + /*Duplicate nodes for lm-sensors.*/ + &sensor_dev_attr_curr2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_power2_input.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_temp1_fault.dev_attr.attr, + NULL +}; + +static ssize_t show_byte(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + return (attr->index == PSU_PMBUS_REVISION) ? sprintf(buf, "%d\n", data->pmbus_revision) : + sprintf(buf, "0\n"); +} + +static ssize_t show_word(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u16 status = 0; + + switch (attr->index) { + case PSU_POWER_ON: /* psu_power_on, low byte bit 6 of status_word, 0=>ON, 1=>OFF */ + status = (data->status_word & 0x40) ? 0 : 1; + break; + case PSU_TEMP_FAULT: /* psu_temp_fault, low byte bit 2 of status_word, 0=>Normal, 1=>temp fault */ + status = (data->status_word & 0x4) >> 2; + break; + case PSU_POWER_GOOD: /* psu_power_good, high byte bit 3 of status_word, 0=>OK, 1=>FAIL */ + status = (data->status_word & 0x800) ? 0 : 1; + break; + } + + return sprintf(buf, "%d\n", status); +} + +static int two_complement_to_int(u16 data, u8 valid_bit, int mask) +{ + u16 valid_data = data & mask; + bool is_negative = valid_data >> (valid_bit - 1); + + return is_negative ? (-(((~valid_data) & mask) + 1)) : valid_data; +} + +static ssize_t set_fan_duty_cycle(struct device *dev, struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + int nr = (attr->index == PSU_FAN1_DUTY_CYCLE) ? 0 : 1; + long speed; + int error; + + error = kstrtol(buf, 10, &speed); + if (error) + return error; + + if (speed < 0 || speed > MAX_FAN_DUTY_CYCLE) + return -EINVAL; + + mutex_lock(&data->update_lock); + data->fan_duty_cycle[nr] = speed; + ym2651y_write_word(client, 0x3B + nr, data->fan_duty_cycle[nr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_linear(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + u16 value = 0; + int exponent, mantissa; + int multiplier = 1000; + + switch (attr->index) { + case PSU_V_OUT: + value = data->v_out; + break; + case PSU_I_OUT: + value = data->i_out; + break; + case PSU_P_OUT_UV: + multiplier = 1000000; /*For lm-sensors, unit is micro-Volt.*/ + /*Passing through*/ + case PSU_P_OUT: + value = data->p_out; + break; + case PSU_TEMP1_INPUT: + value = data->temp; + break; + case PSU_FAN1_SPEED: + value = data->fan_speed; + multiplier = 1; + break; + case PSU_FAN1_DUTY_CYCLE: + value = data->fan_duty_cycle[0]; + multiplier = 1; + break; + case PSU_MFR_VIN_MIN: + value = data->mfr_vin_min; + break; + case PSU_MFR_VIN_MAX: + value = data->mfr_vin_max; + break; + case PSU_MFR_VOUT_MIN: + value = data->mfr_vout_min; + break; + case PSU_MFR_VOUT_MAX: + value = data->mfr_vout_max; + break; + case PSU_MFR_PIN_MAX: + value = data->mfr_pin_max; + break; + case PSU_MFR_POUT_MAX: + value = data->mfr_pout_max; + break; + case PSU_MFR_IOUT_MAX: + value = data->mfr_iout_max; + break; + case PSU_MFR_IIN_MAX: + value = data->mfr_iin_max; + break; + } + + exponent = two_complement_to_int(value >> 11, 5, 0x1f); + mantissa = two_complement_to_int(value & 0x7ff, 11, 0x7ff); + return (exponent >= 0) ? sprintf(buf, "%d\n", (mantissa << exponent) * multiplier) : + sprintf(buf, "%d\n", (mantissa * multiplier) / (1 << -exponent)); +} + +static ssize_t show_fan_fault(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + + u8 shift = (attr->index == PSU_FAN1_FAULT) ? 7 : 6; + + return sprintf(buf, "%d\n", data->fan_fault >> shift); +} + +static ssize_t show_over_temp(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct ym2651y_data *data = ym2651y_update_device(dev); + + return sprintf(buf, "%d\n", data->over_temp >> 7); +} + +static ssize_t show_ascii(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct ym2651y_data *data = ym2651y_update_device(dev); + u8 *ptr = NULL; + + switch (attr->index) { + case PSU_FAN_DIRECTION: /* psu_fan_dir */ + ptr = data->fan_dir; + break; + case PSU_MFR_ID: /* psu_mfr_id */ + ptr = data->mfr_id; + break; + case PSU_MFR_MODEL: /* psu_mfr_model */ + ptr = data->mfr_model; + break; + case PSU_MFR_REVISION: /* psu_mfr_revision */ + ptr = data->mfr_revsion; + break; + default: + return 0; + } + + return sprintf(buf, "%s\n", ptr); +} + +static const struct attribute_group ym2651y_group = { + .attrs = ym2651y_attributes, +}; + +static int ym2651y_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct ym2651y_data *data; + int status; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct ym2651y_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &ym2651y_group); + if (status) { + goto exit_free; + } + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: psu '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &ym2651y_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int ym2651y_remove(struct i2c_client *client) +{ + struct ym2651y_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &ym2651y_group); + kfree(data); + + return 0; +} + +static const struct i2c_device_id ym2651y_id[] = { + { "ym2651", YM2651 }, + { "ym2401", YM2401 }, + { "ym2851", YM2851 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, ym2651y_id); + +static struct i2c_driver ym2651y_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "ym2651", + }, + .probe = ym2651y_probe, + .remove = ym2651y_remove, + .id_table = ym2651y_id, + .address_list = normal_i2c, +}; + +static int ym2651y_read_byte(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_byte_data(client, reg); +} + +static int ym2651y_read_word(struct i2c_client *client, u8 reg) +{ + return i2c_smbus_read_word_data(client, reg); +} + +static int ym2651y_write_word(struct i2c_client *client, u8 reg, u16 value) +{ + return i2c_smbus_write_word_data(client, reg, value); +} + +static int ym2651y_read_block(struct i2c_client *client, u8 command, u8 *data, + int data_len) +{ + int result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (unlikely(result < 0)) + goto abort; + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + + result = 0; + +abort: + return result; +} + +struct reg_data_byte { + u8 reg; + u8 *value; +}; + +struct reg_data_word { + u8 reg; + u16 *value; +}; + +static struct ym2651y_data *ym2651y_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ym2651y_data *data = i2c_get_clientdata(client); + + mutex_lock(&data->update_lock); + + if (time_after(jiffies, data->last_updated + HZ + HZ / 2) + || !data->valid) { + int i, status; + u8 command; + u8 fan_dir[5] = {0}; + struct reg_data_byte regs_byte[] = { {0x19, &data->capability}, + {0x7d, &data->over_temp}, + {0x81, &data->fan_fault}, + {0x98, &data->pmbus_revision} + }; + struct reg_data_word regs_word[] = { {0x79, &data->status_word}, + {0x8b, &data->v_out}, + {0x8c, &data->i_out}, + {0x96, &data->p_out}, + {0x8d, &data->temp}, + {0x3b, &(data->fan_duty_cycle[0])}, + {0x3c, &(data->fan_duty_cycle[1])}, + {0x90, &data->fan_speed}, + {0xa0, &data->mfr_vin_min}, + {0xa1, &data->mfr_vin_max}, + {0xa2, &data->mfr_iin_max}, + {0xa3, &data->mfr_pin_max}, + {0xa4, &data->mfr_vout_min}, + {0xa5, &data->mfr_vout_max}, + {0xa6, &data->mfr_iout_max}, + {0xa7, &data->mfr_pout_max} + }; + + dev_dbg(&client->dev, "Starting ym2651 update\n"); + + /* Read byte data */ + for (i = 0; i < ARRAY_SIZE(regs_byte); i++) { + status = ym2651y_read_byte(client, regs_byte[i].reg); + + if (status < 0) + { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_byte[i].reg, status); + *(regs_byte[i].value) = 0; + } + else { + *(regs_byte[i].value) = status; + } + } + + /* Read word data */ + for (i = 0; i < ARRAY_SIZE(regs_word); i++) { + status = ym2651y_read_word(client, regs_word[i].reg); + + if (status < 0) + { + dev_dbg(&client->dev, "reg %d, err %d\n", + regs_word[i].reg, status); + *(regs_word[i].value) = 0; + } + else { + *(regs_word[i].value) = status; + } + } + + /* Read fan_direction */ + command = 0xC3; + status = ym2651y_read_block(client, command, fan_dir, ARRAY_SIZE(fan_dir)-1); + + if (status < 0) { + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + } + + strncpy(data->fan_dir, fan_dir+1, ARRAY_SIZE(data->fan_dir)-1); + data->fan_dir[ARRAY_SIZE(data->fan_dir)-1] = '\0'; + + /* Read mfr_id */ + command = 0x99; + status = ym2651y_read_block(client, command, data->mfr_id, + ARRAY_SIZE(data->mfr_id)-1); + data->mfr_id[ARRAY_SIZE(data->mfr_id)-1] = '\0'; + + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + + /* Read mfr_model */ + command = 0x9a; + status = ym2651y_read_block(client, command, data->mfr_model, + ARRAY_SIZE(data->mfr_model)-1); + data->mfr_model[ARRAY_SIZE(data->mfr_model)-1] = '\0'; + + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + + /* Read mfr_revsion */ + command = 0x9b; + status = ym2651y_read_block(client, command, data->mfr_revsion, + ARRAY_SIZE(data->mfr_revsion)-1); + data->mfr_revsion[ARRAY_SIZE(data->mfr_revsion)-1] = '\0'; + + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", command, status); + + data->last_updated = jiffies; + data->valid = 1; + } + + mutex_unlock(&data->update_lock); + + return data; +} + +module_i2c_driver(ym2651y_driver); + +MODULE_AUTHOR("Brandon Chuang "); +MODULE_DESCRIPTION("3Y Power YM-2651Y driver"); +MODULE_LICENSE("GPL"); + + diff --git a/platform/broadcom/sonic-platform-modules-accton/debian/changelog b/platform/broadcom/sonic-platform-modules-accton/debian/changelog new file mode 100755 index 000000000000..2b08b12c206a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/debian/changelog @@ -0,0 +1,18 @@ +sonic-accton-platform-modules (1.1) unstable; urgency=low + + * Add support for AS7816-64X. + + -- Accton Network Tue, 19 Dec 2017 09:35:58 +0800 + +sonic-accton-platform-modules (1.1) unstable; urgency=low + + * Add support for Accton AS5712-54X + + -- Accton Network Wed, 11 Oct 2017 14:21:45 +0800 + +sonic-accton-platform-modules (1.0) unstable; urgency=low + + * Add support for Accton AS7712-32X + * Initial release + + -- Accton Network Thu, 01 Jun 2017 14:06:38 +0800 diff --git a/platform/broadcom/sonic-platform-modules-accton/debian/compat b/platform/broadcom/sonic-platform-modules-accton/debian/compat new file mode 100644 index 000000000000..ec635144f600 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/debian/compat @@ -0,0 +1 @@ +9 diff --git a/platform/broadcom/sonic-platform-modules-accton/debian/control b/platform/broadcom/sonic-platform-modules-accton/debian/control new file mode 100755 index 000000000000..22faf6d202b8 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/debian/control @@ -0,0 +1,41 @@ +Source: sonic-accton-platform-modules +Section: main +Priority: extra +Maintainer: Accton network , Accton Network +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: sonic-platform-accton-as7712-32x +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: sonic-platform-accton-as5712-54x +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: sonic-platform-accton-as7816-64x +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: sonic-platform-accton-as7716-32x +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: sonic-platform-accton-as7716-32xb +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: sonic-platform-accton-as7312-54x +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: sonic-platform-accton-as7326-56x +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp diff --git a/platform/broadcom/sonic-platform-modules-accton/debian/rules b/platform/broadcom/sonic-platform-modules-accton/debian/rules new file mode 100755 index 000000000000..8274607f27b5 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-accton/debian/rules @@ -0,0 +1,86 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +include /usr/share/dpkg/pkg-info.mk + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +export INSTALL_MOD_DIR:=extra + +PYTHON ?= python2 + +PACKAGE_PRE_NAME := sonic-platform-accton +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MOD_SRC_DIR:= $(shell pwd) +MODULE_DIRS:= as7712-32x as5712-54x as7816-64x as7716-32x as7716-32xb as7312-54x as7326-56x +MODULE_DIR := modules +UTILS_DIR := utils +SERVICE_DIR := service +CLASSES_DIR := classes +CONF_DIR := conf + +%: + dh $@ --with systemd,python2,python3 --buildsystem=pybuild + +clean: + dh_testdir + dh_testroot + dh_clean + +build: + #make modules -C $(KERNEL_SRC)/build M=$(MODULE_SRC) + (for mod in $(MODULE_DIRS); do \ + make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ + $(PYTHON) $${mod}/setup.py build; \ + done) + +binary: binary-arch binary-indep + # Nothing to do + +binary-arch: + # Nothing to do + +#install: build + #dh_testdir + #dh_testroot + #dh_clean -k + #dh_installdirs + +binary-indep: + dh_testdir + dh_installdirs + + # Custom package commands + (for mod in $(MODULE_DIRS); do \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod}/usr/local/bin; \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system; \ + cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/* debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/local/bin/; \ + cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system/; \ + $(PYTHON) $${mod}/setup.py install --root=$(MOD_SRC_DIR)/debian/$(PACKAGE_PRE_NAME)-$${mod} --install-layout=deb; \ + done) + # Resuming debhelper scripts + dh_testroot + dh_install + dh_installchangelogs + dh_installdocs + dh_systemd_enable + dh_installinit + dh_systemd_start + dh_link + dh_fixperms + dh_compress + dh_strip + dh_installdeb + dh_gencontrol + dh_md5sums + dh_builddeb +.PHONY: build binary binary-arch binary-indep clean diff --git a/platform/broadcom/sonic-platform-modules-ingrasys b/platform/broadcom/sonic-platform-modules-ingrasys deleted file mode 160000 index f6e0fa9860c6..000000000000 --- a/platform/broadcom/sonic-platform-modules-ingrasys +++ /dev/null @@ -1 +0,0 @@ -Subproject commit f6e0fa9860c6d1bd9274b091147d4fc06a0597c3 diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/.gitignore b/platform/broadcom/sonic-platform-modules-ingrasys/.gitignore new file mode 100644 index 000000000000..f805e810e5c6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/.gitignore @@ -0,0 +1,33 @@ +# Object files +*.o +*.ko +*.obj +*.elf + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/LICENSE b/platform/broadcom/sonic-platform-modules-ingrasys/LICENSE new file mode 100644 index 000000000000..9cecc1d4669e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/LICENSE @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + {one line to give the program's name and a brief idea of what it does.} + Copyright (C) {year} {name of author} + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + {project} Copyright (C) {year} {fullname} + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/changelog b/platform/broadcom/sonic-platform-modules-ingrasys/debian/changelog new file mode 100644 index 000000000000..338234f97c45 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/changelog @@ -0,0 +1,22 @@ +platform-driver (1.1.0) unstable; urgency=low + + * Add support for s9200-64x + + -- developer Fri, 26 May 2017 11:00:00 +0800 + +platform-driver (1.1.0) unstable; urgency=low + + * Add support for s8810-32q + + -- developer Fri, 26 May 2017 11:00:00 +0800 +platform-driver (1.1.0) unstable; urgency=low + + * Add support for s8900 series + + -- developer Wed, 29 Mar 2017 11:00:00 +0800 + +platform-driver (1.0.0) unstable; urgency=low + + * Initial release (Closes: #nnnn) + + -- developer Wed, 05 Oct 2016 16:30:45 +0800 diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/compat b/platform/broadcom/sonic-platform-modules-ingrasys/debian/compat new file mode 100644 index 000000000000..ec635144f600 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/compat @@ -0,0 +1 @@ +9 diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/control b/platform/broadcom/sonic-platform-modules-ingrasys/debian/control new file mode 100644 index 000000000000..99c87f772ed5 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/control @@ -0,0 +1,26 @@ +Source: platform-driver +Section: unknown +Priority: optional +Maintainer: Wade He +Build-Depends: debhelper (>= 9), dh-systemd +Standards-Version: 1.0.0 + +Package: sonic-platform-ingrasys-s9100 +Architecture: amd64 +Description: This package contains S9100 platform driver utility for SONiC project. + +Package: sonic-platform-ingrasys-s8900-64xc +Architecture: amd64 +Description: This package contains S8900-64XC platform driver utility for SONiC project. + +Package: sonic-platform-ingrasys-s8900-54xc +Architecture: amd64 +Description: This package contains S8900-54XC platform driver utility for SONiC project. + +Package: sonic-platform-ingrasys-s8810-32q +Architecture: amd64 +Description: This package contains S8810-32Q platform driver utility for SONiC project. + +Package: sonic-platform-ingrasys-s9200-64x +Architecture: amd64 +Description: This package contains S9200-64X platform driver utility for SONiC project. diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/rules b/platform/broadcom/sonic-platform-modules-ingrasys/debian/rules new file mode 100644 index 000000000000..352dd55afbd7 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/rules @@ -0,0 +1,80 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +export INSTALL_MOD_DIR:=extra + +PACKAGE_PRE_NAME := sonic-platform-ingrasys +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MOD_SRC_DIR:= $(shell pwd) +MODULE_DIRS:= s9100 s8900-64xc s8900-54xc s8810-32q s9200-64x +MODULE_DIR := modules +UTILS_DIR := utils +SERVICE_DIR := service +CONF_DIR := conf + +%: + dh $@ --with systemd + +clean: + dh_testdir + dh_testroot + dh_clean + +build: + #make modules -C $(KERNEL_SRC)/build M=$(MODULE_SRC) + (for mod in $(MODULE_DIRS); do \ + make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ + done) + +binary: binary-arch binary-indep + # Nothing to do + +binary-arch: + # Nothing to do + +#install: build + #dh_testdir + #dh_testroot + #dh_clean -k + #dh_installdirs + +binary-indep: + dh_testdir + dh_installdirs + + # Custom package commands + (for mod in $(MODULE_DIRS); do \ + mkdir debian/tmp/usr/sbin -p; \ + mkdir debian/tmp/lib/systemd/system -p; \ + mkdir debian/tmp/etc -p; \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod} $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/*.sh debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/sbin/; \ + cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system/; \ + done) + # Resuming debhelper scripts + dh_testroot + dh_install + dh_installchangelogs + dh_installdocs + dh_systemd_enable + dh_installinit + dh_systemd_start + dh_link + dh_fixperms + dh_compress + dh_strip + dh_installdeb + dh_gencontrol + dh_md5sums + dh_builddeb +.PHONY: build binary binary-arch binary-indep clean diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.dirs new file mode 100644 index 000000000000..bec29f195770 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.dirs @@ -0,0 +1,3 @@ +usr/sbin +lib/systemd/system +etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.install new file mode 100644 index 000000000000..38efbef5d864 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.install @@ -0,0 +1,3 @@ +lib/systemd/ +usr/sbin/ +etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postinst new file mode 100644 index 000000000000..6a94f8327559 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postinst @@ -0,0 +1,43 @@ +# Automatically added by dh_systemd_enable +# This will only remove masks created by d-s-h on package removal. +deb-systemd-helper unmask s8810-32q-monitor.service >/dev/null || true +deb-systemd-helper unmask qsfp-monitor.service >/dev/null || true +# Generate kernel modules.dep and map files for add eeprom_mb. +depmod -a || true +# was-enabled defaults to true, so new installations run enable. +if deb-systemd-helper --quiet was-enabled s8810-32q-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable s8810-32q-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state s8810-32q-monitor.service >/dev/null || true +fi +if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable qsfp-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s8810-32q-monitor" ]; then + update-rc.d s8810-32q-monitor defaults >/dev/null + invoke-rc.d s8810-32q-monitor start || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + update-rc.d qsfp-monitor defaults >/dev/null + invoke-rc.d qsfp-monitor start || exit $? +fi +# End automatically added section +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + deb-systemd-invoke start s8810-32q-monitor.service >/dev/null || true + deb-systemd-invoke start qsfp-monitor.service >/dev/null || true +fi +# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postrm new file mode 100644 index 000000000000..a1049b153eef --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.postrm @@ -0,0 +1,38 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + fi +# End automatically added section +# Automatically added by dh_installinit +if [ "$1" = "purge" ] ; then + update-rc.d s8810-32q-monitor remove >/dev/null + update-rc.d qsfp-monitor remove >/dev/null +fi + + +# In case this system is running systemd, we make systemd reload the unit files +# to pick up changes. +if [ -d /run/systemd/system ] ; then + systemctl --system daemon-reload >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_systemd_enable +if [ "$1" = "remove" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper mask s8810-32q-monitor.service >/dev/null + deb-systemd-helper mask qsfp-monitor.service >/dev/null + fi +fi + +if [ "$1" = "purge" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper purge s8810-32q-monitor.service >/dev/null + deb-systemd-helper unmask s8810-32q-monitor.service >/dev/null + deb-systemd-helper purge qsfp-monitor.service >/dev/null + deb-systemd-helper unmask qsfp-monitor.service >/dev/null + fi +fi +# Generate kernel modules.dep and map files for remove eeprom_mb. +depmod -a || true +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.prerm new file mode 100644 index 000000000000..5a6581e5f410 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.prerm @@ -0,0 +1,17 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + deb-systemd-invoke stop s8810-32q-monitor.service >/dev/null + deb-systemd-invoke stop qsfp-monitor.service >/dev/null +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s8810-32q-monitor" ]; then + invoke-rc.d s8810-32q-monitor stop || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + invoke-rc.d qsfp-monitor stop || exit $? +fi +# Driver deinit +/usr/sbin/i2c_utils.sh i2c_deinit +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.upstart new file mode 100644 index 000000000000..f907d1bb51e5 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8810-32q.upstart @@ -0,0 +1,6 @@ +description "SONiC platform service" + +respawn + +exec /usr/sbin/s8810_32q_monitor.sh +exec /usr/sbin/qsfp_monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.dirs new file mode 100644 index 000000000000..bec29f195770 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.dirs @@ -0,0 +1,3 @@ +usr/sbin +lib/systemd/system +etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.install new file mode 100644 index 000000000000..38efbef5d864 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.install @@ -0,0 +1,3 @@ +lib/systemd/ +usr/sbin/ +etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postinst new file mode 100644 index 000000000000..d2dc4ea518fb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postinst @@ -0,0 +1,43 @@ +# Automatically added by dh_systemd_enable +# This will only remove masks created by d-s-h on package removal. +deb-systemd-helper unmask s8900-54xc-monitor.service >/dev/null || true +# Generate kernel modules.dep and map files for add eeprom_mb. +depmod -a || true +# was-enabled defaults to true, so new installations run enable. +if deb-systemd-helper --quiet was-enabled s8900-54xc-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable s8900-54xc-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state s8900-54xc-monitor.service >/dev/null || true +fi +if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable qsfp-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true +fi + +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s8900-54xc-monitor" ]; then + update-rc.d s8900-54xc-monitor defaults >/dev/null + invoke-rc.d s8900-54xc-monitor start || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + update-rc.d qsfp-monitor defaults >/dev/null + invoke-rc.d qsfp-monitor start || exit $? +fi +# End automatically added section +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + deb-systemd-invoke start s8900-54xc-monitor.service >/dev/null || true + deb-systemd-invoke start qsfp-monitor.service >/dev/null || true +fi +# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postrm new file mode 100644 index 000000000000..b4e4ede5d88d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.postrm @@ -0,0 +1,38 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + fi +# End automatically added section +# Automatically added by dh_installinit +if [ "$1" = "purge" ] ; then + update-rc.d s8900-54xc-monitor remove >/dev/null + update-rc.d qsfp-monitor remove >/dev/null +fi + + +# In case this system is running systemd, we make systemd reload the unit files +# to pick up changes. +if [ -d /run/systemd/system ] ; then + systemctl --system daemon-reload >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_systemd_enable +if [ "$1" = "remove" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper mask s8900-54xc-monitor.service >/dev/null + deb-systemd-helper mask qsfp-monitor.service >/dev/null + fi +fi + +if [ "$1" = "purge" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper purge s8900-54xc-monitor.service >/dev/null + deb-systemd-helper unmask s8900-54xc-monitor.service >/dev/null + deb-systemd-helper purge qsfp-monitor.service >/dev/null + deb-systemd-helper unmask qsfp-monitor.service >/dev/null + fi +fi +# Generate kernel modules.dep and map files for remove eeprom_mb. +depmod -a || true +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.prerm new file mode 100644 index 000000000000..b35262b16cf8 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.prerm @@ -0,0 +1,17 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + deb-systemd-invoke stop s8900-54xc-monitor.service >/dev/null + deb-systemd-invoke stop qsfp-monitor.service >/dev/null +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s8900-54xc-monitor" ]; then + invoke-rc.d s8900-54xc-monitor stop || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + invoke-rc.d qsfp-monitor stop || exit $? +fi +# Driver deinit +/usr/sbin/i2c_utils.sh i2c_deinit +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.upstart new file mode 100644 index 000000000000..cfdfc490fcc7 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-54xc.upstart @@ -0,0 +1,6 @@ +description "SONiC platform service" + +respawn + +exec /usr/sbin/s8900_54xc_monitor.sh +exec /usr/sbin/qsfp_monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.dirs new file mode 100644 index 000000000000..be337bc5ea1f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.dirs @@ -0,0 +1,3 @@ +usr/sbin +lib/systemd/system +etc/ diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.install new file mode 100644 index 000000000000..1cf6f97b306f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.install @@ -0,0 +1,3 @@ +lib/systemd/ +usr/sbin/ +etc/ diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postinst new file mode 100644 index 000000000000..dfc789e964bd --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postinst @@ -0,0 +1,42 @@ +# Automatically added by dh_systemd_enable +# This will only remove masks created by d-s-h on package removal. +deb-systemd-helper unmask s8900-64xc-monitor.service >/dev/null || true +# Generate kernel modules.dep and map files for add eeprom_mb. +depmod -a || true +# was-enabled defaults to true, so new installations run enable. +if deb-systemd-helper --quiet was-enabled s8900-64xc-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable s8900-64xc-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state s8900-64xc-monitor.service >/dev/null || true +fi +if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable qsfp-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s8900-64xc-monitor" ]; then + update-rc.d s8900-64xc-monitor defaults >/dev/null + invoke-rc.d s8900-64xc-monitor start || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + update-rc.d qsfp-monitor defaults >/dev/null + invoke-rc.d qsfp-monitor start || exit $? +fi +# End automatically added section +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + deb-systemd-invoke start s8900-64xc-monitor.service >/dev/null || true + deb-systemd-invoke start qsfp-monitor.service >/dev/null || true +fi +# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postrm new file mode 100644 index 000000000000..e3dddecc088b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.postrm @@ -0,0 +1,38 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + fi +# End automatically added section +# Automatically added by dh_installinit +if [ "$1" = "purge" ] ; then + update-rc.d s8900-64xc-monitor remove >/dev/null + update-rc.d qsfp-monitor remove >/dev/null +fi + + +# In case this system is running systemd, we make systemd reload the unit files +# to pick up changes. +if [ -d /run/systemd/system ] ; then + systemctl --system daemon-reload >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_systemd_enable +if [ "$1" = "remove" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper mask s8900-64xc-monitor.service >/dev/null + deb-systemd-helper mask qsfp-monitor.service >/dev/null + fi +fi + +if [ "$1" = "purge" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper purge s8900-64xc-monitor.service >/dev/null + deb-systemd-helper unmask s8900-64xc-monitor.service >/dev/null + deb-systemd-helper purge qsfp-monitor.service >/dev/null + deb-systemd-helper unmask qsfp-monitor.service >/dev/null + fi +fi +# Generate kernel modules.dep and map files for remove eeprom_mb. +depmod -a || true +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.prerm new file mode 100644 index 000000000000..2168a6c76245 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.prerm @@ -0,0 +1,15 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + deb-systemd-invoke stop s8900-64xc-monitor.service >/dev/null + deb-systemd-invoke stop qsfp-monitor.service >/dev/null +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s8900-64xc-monitor" ]; then + invoke-rc.d s8900-64xc-monitor stop || exit $? + invoke-rc.d qsfp-monitor stop || exit $? +fi +# Driver deinit +/usr/sbin/i2c_utils.sh i2c_deinit +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.upstart new file mode 100644 index 000000000000..25510457ecd8 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s8900-64xc.upstart @@ -0,0 +1,6 @@ +description "SONiC platform service" + +respawn + +exec /usr/sbin/s8900_64xc_monitor.sh +exec /usr/sbin/qsfp-monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.dirs new file mode 100644 index 000000000000..bec29f195770 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.dirs @@ -0,0 +1,3 @@ +usr/sbin +lib/systemd/system +etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.install new file mode 100644 index 000000000000..38efbef5d864 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.install @@ -0,0 +1,3 @@ +lib/systemd/ +usr/sbin/ +etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postinst new file mode 100644 index 000000000000..a9bc64e26c05 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postinst @@ -0,0 +1,43 @@ +# Automatically added by dh_systemd_enable +# This will only remove masks created by d-s-h on package removal. +deb-systemd-helper unmask s9100-monitor.service >/dev/null || true +deb-systemd-helper unmask qsfp-monitor.service >/dev/null || true +# Generate kernel modules.dep and map files for add eeprom_mb. +depmod -a || true +# was-enabled defaults to true, so new installations run enable. +if deb-systemd-helper --quiet was-enabled s9100-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable s9100-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state s9100-monitor.service >/dev/null || true +fi +if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable qsfp-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s9100-monitor" ]; then + update-rc.d s9100-monitor defaults >/dev/null + invoke-rc.d s9100-monitor start || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + update-rc.d qsfp-monitor defaults >/dev/null + invoke-rc.d qsfp-monitor start || exit $? +fi +# End automatically added section +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + deb-systemd-invoke start s9100-monitor.service >/dev/null || true + deb-systemd-invoke start qsfp-monitor.service >/dev/null || true +fi +# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postrm new file mode 100644 index 000000000000..669179b11e50 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.postrm @@ -0,0 +1,38 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + fi +# End automatically added section +# Automatically added by dh_installinit +if [ "$1" = "purge" ] ; then + update-rc.d s9100-monitor remove >/dev/null + update-rc.d qsfp-monitor remove >/dev/null +fi + + +# In case this system is running systemd, we make systemd reload the unit files +# to pick up changes. +if [ -d /run/systemd/system ] ; then + systemctl --system daemon-reload >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_systemd_enable +if [ "$1" = "remove" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper mask s9100-monitor.service >/dev/null + deb-systemd-helper mask qsfp-monitor.service >/dev/null + fi +fi + +if [ "$1" = "purge" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper purge s9100-monitor.service >/dev/null + deb-systemd-helper unmask s9100-monitor.service >/dev/null + deb-systemd-helper purge qsfp-monitor.service >/dev/null + deb-systemd-helper unmask qsfp-monitor.service >/dev/null + fi +fi +# Generate kernel modules.dep and map files for remove eeprom_mb. +depmod -a || true +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.prerm new file mode 100644 index 000000000000..2ca8a83b273f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.prerm @@ -0,0 +1,17 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + deb-systemd-invoke stop s9100-monitor.service >/dev/null + deb-systemd-invoke stop qsfp-monitor.service >/dev/null +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s9100-monitor" ]; then + invoke-rc.d s9100-monitor stop || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + invoke-rc.d qsfp-monitor stop || exit $? +fi +# Driver deinit +/usr/sbin/i2c_utils.sh i2c_deinit +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.upstart new file mode 100644 index 000000000000..5d0ba7080129 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9100.upstart @@ -0,0 +1,6 @@ +description "SONiC platform service" + +respawn + +exec /usr/sbin/s9100_monitor.sh +exec /usr/sbin/qsfp_monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.dirs b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.dirs new file mode 100644 index 000000000000..bec29f195770 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.dirs @@ -0,0 +1,3 @@ +usr/sbin +lib/systemd/system +etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.install b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.install new file mode 100644 index 000000000000..38efbef5d864 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.install @@ -0,0 +1,3 @@ +lib/systemd/ +usr/sbin/ +etc/ \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postinst b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postinst new file mode 100644 index 000000000000..0605612a1190 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postinst @@ -0,0 +1,43 @@ +# Automatically added by dh_systemd_enable +# This will only remove masks created by d-s-h on package removal. +deb-systemd-helper unmask s9200-64x-monitor.service >/dev/null || true +deb-systemd-helper unmask qsfp-monitor.service >/dev/null || true +# Generate kernel modules.dep and map files for add eeprom_mb. +depmod -a || true +# was-enabled defaults to true, so new installations run enable. +if deb-systemd-helper --quiet was-enabled s9200-64x-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable s9200-64x-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state s9200-64x-monitor.service >/dev/null || true +fi +if deb-systemd-helper --quiet was-enabled qsfp-monitor.service; then + # Enables the unit on first installation, creates new + # symlinks on upgrades if the unit file has changed. + deb-systemd-helper enable qsfp-monitor.service >/dev/null || true +else + # Update the statefile to add new symlinks (if any), which need to be + # cleaned up on purge. Also remove old symlinks. + deb-systemd-helper update-state qsfp-monitor.service >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s9200-64x-monitor" ]; then + update-rc.d s9200-64x-monitor defaults >/dev/null + invoke-rc.d s9200-64x-monitor start || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + update-rc.d qsfp-monitor defaults >/dev/null + invoke-rc.d qsfp-monitor start || exit $? +fi +# End automatically added section +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + deb-systemd-invoke start s9200-64x-monitor.service >/dev/null || true + deb-systemd-invoke start qsfp-monitor.service >/dev/null || true +fi +# End automatically added section diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postrm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postrm new file mode 100644 index 000000000000..3e9494097556 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.postrm @@ -0,0 +1,38 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + systemctl --system daemon-reload >/dev/null || true + fi +# End automatically added section +# Automatically added by dh_installinit +if [ "$1" = "purge" ] ; then + update-rc.d s9200-64x-monitor remove >/dev/null + update-rc.d qsfp-monitor remove >/dev/null +fi + + +# In case this system is running systemd, we make systemd reload the unit files +# to pick up changes. +if [ -d /run/systemd/system ] ; then + systemctl --system daemon-reload >/dev/null || true +fi +# End automatically added section +# Automatically added by dh_systemd_enable +if [ "$1" = "remove" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper mask s9200-64x-monitor.service >/dev/null + deb-systemd-helper mask qsfp-monitor.service >/dev/null + fi +fi + +if [ "$1" = "purge" ]; then + if [ -x "/usr/bin/deb-systemd-helper" ]; then + deb-systemd-helper purge s9200-64x-monitor.service >/dev/null + deb-systemd-helper unmask s9200-64x-monitor.service >/dev/null + deb-systemd-helper purge qsfp-monitor.service >/dev/null + deb-systemd-helper unmask qsfp-monitor.service >/dev/null + fi +fi +# Generate kernel modules.dep and map files for remove eeprom_mb. +depmod -a || true +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.prerm b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.prerm new file mode 100644 index 000000000000..6238dcad7886 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.prerm @@ -0,0 +1,17 @@ +# Automatically added by dh_systemd_start +if [ -d /run/systemd/system ]; then + deb-systemd-invoke stop s9200-64x-monitor.service >/dev/null + deb-systemd-invoke stop qsfp-monitor.service >/dev/null +fi +# End automatically added section +# Automatically added by dh_installinit +if [ -x "/etc/init.d/s9200-64x-monitor" ]; then + invoke-rc.d s9200-64x-monitor stop || exit $? +fi +if [ -x "/etc/init.d/qsfp-monitor" ]; then + invoke-rc.d qsfp-monitor stop || exit $? +fi +# Driver deinit +/usr/sbin/i2c_utils.sh i2c_deinit +# End automatically added section + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.upstart b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.upstart new file mode 100644 index 000000000000..00803ff5e3b9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/debian/sonic-platform-ingrasys-s9200-64x.upstart @@ -0,0 +1,6 @@ +description "SONiC platform service" + +respawn + +exec /usr/sbin/s9200_64x_monitor.sh +exec /usr/sbin/qsfp_monitor.sh diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/README.md b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/README.md new file mode 100644 index 000000000000..dec38cb33393 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/README.md @@ -0,0 +1,185 @@ +# Ingrasys S8810-32Q Platform Driver for SONiC + +Copyright (C) 2016 Ingrasys, Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + +## Licensing terms + +The Licensing terms of the files within this project is split 2 parts. +The Linux kernel is released under the GNU General Public License version 2. +All other code is released under the GNU General Public License version 3. +Please see the LICENSE file for copies of both licenses. + +## Contents of this package + + - service/ + > Service config files for platform initialization and monitoring + - utils/ + > Scripts useful during platform bringup and sysfs function + - conf/ + > Platform configure files. + +## Kernel modules and drivers + +The driver for interacting with Ingrasys S8810-32Q is contained in the I2C +kernel module and initialization script. The initialization script loads +the modules in the correct order. It has been built and tested against +the Linux 3.16 kernel. + +The initialization script will modprobe the needed modules, navigate to the +module's device directory in sysfs, and write configuration data to +the kernel module. + +### IGB + +This is OOB Ports on front panel for management plane. + +The IGB module must be loaded first on Ingrasys S8810-32Q platform. + +### I2C i801 + +The I2C i801 on Ingrasys S8810-32Q can be found in +`/sys/bus/i2c/devices/i2c-0/` + +This is I2C bus for Clock Gen, DIMM channel and digital potentiometers. + +The i801 module must be loaded second on Ingrasys S8810-32Q. + +### I2C iSMT + +The I2C iSMT module on S8810-32Q can be found in +`/sys/bus/i2c/devices/i2c-1/` + +This is I2C bus for CPLD, HWM, power controller and I2C Switches. + +The i801 module must be loaded third on Ingrasys S8810-32Q. + +### I2C PCA9548 +The PCA9548 module on S8810-32Q can be found in +`/sys/bus/i2c/devices/i2c-2/` , `/sys/bus/i2c/devices/i2c-3/`, +`/sys/bus/i2c/devices/i2c-4/`, `/sys/bus/i2c/devices/i2c-5/`, +`/sys/bus/i2c/devices/i2c-6/`, `/sys/bus/i2c/devices/i2c-7/`, +`/sys/bus/i2c/devices/i2c-8/`, `/sys/bus/i2c/devices/i2c-9/`. + +The pca9548 module for zQSFP module get/set functions, PSU information, +fan status and EEPROM. + +## Hardware components + +The hardware components are initialized in the init script on S8810-32Q. +The following describes manual initialization as well as interaction. +The examples below are just for Ingrasys S8810-32Q platform. + +### Hardware initialization + +When the sonic-platform-ingrasys-s8810-32q package is installed on the S8810-32Q, +it is automatically initialized. If you want to manual initialization, the +utility command usage as follows: +``` + i2c_utils.sh i2c_init +``` + +### EEPROM + +The EEPROM is including the board SKU, model name, vendor name, serial number, +and other information can be accessed with the specific eeprom kernel module. +After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs. + +The hexdump utility can be used to decode the raw output of the EEPROM. +For example, +``` + bash# echo "mb_eeprom 0x54" > /sys/bus/i2c/devices/i2c-9/new_device + bash# cat /sys/bus/i2c/drivers/mb_eeprom/9-0054/eeprom | hexdump -C +``` + +### Front panel LEDs + +LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`. +Utility function command usage as follows: + +``` +Status LED: + i2c_utils.sh i2c_sys_led green|amber on|off + +Fan status LED: + i2c_utils.sh i2c_fan_led green|amber on|off + +PSU1 status LED: + i2c_utils.sh i2c_psu1_led green|amber on|off + +PSU2 status LED: + i2c_utils.sh i2c_psu2_led green|amber on|off + +``` +QSFP Module Port LEDs control by ASIC library. + + +### Fan speed + +Fan speed are controlled by the w83795 kernel module. +It can be found in `/sys/class/hwmon/hwmon1/device/`. +If they were compiled as modules, you will need to modprobe w83795 for +their sysfs entries to show up. Each fan has an `fan_input` file +for reading the fan speed. And `pwm1` setting fan1 to fan4, +`pwm2` setting fan5 to fan8. + +There is docker-platform-monitor container installed fancontrol package that can +automatic control platform fan speed. + + +### Temperature sensors + +Temperature sensors are controlled by the w83795 kernel +module. It can be found in `/sys/class/hwmon/hwmon1/device/`. +If they were compiled as modules, then you will need to modprobe w83795 for +their sysfs entries to show up. +`temp1_input` is front MAC temperature sensor. `temp2_input` is rear MAC +temperature sensor. + +There is docker-platform-monitor container installed lm-sensors package that can +monitor platform temperature. And `sensors` command can show each +temperature sensors status. + +### Power supplies + +Power supplies status and its EEPROM info can be used i2c utility +`/usr/sbin/i2c_utils.sh` to get. +The usage as follows: +``` +PSU EEPROM: + i2c_utils.sh i2c_psu_eeprom_get + hexdump -C psu0.rom + hexdump -C psu1.rom + +PSU Status: + i2c_utils.sh i2c_psu_status +``` + +### QSFPs +QSFP modules are managed by the pca9548 kernel driver. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +QSFP EEPROM: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + +QSFP Insert Event: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + 0 => not insert + 1 => inserted +``` + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/Makefile b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/Makefile new file mode 100755 index 000000000000..7c782163f402 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := eeprom_mb.o +obj-m += ingrasys_s8810_32q_psu.o diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/eeprom_mb.c b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/eeprom_mb.c new file mode 100755 index 000000000000..2040e3cfc5db --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/eeprom_mb.c @@ -0,0 +1,212 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57, I2C_CLIENT_END }; + + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 256 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void mb_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, (u8)((addr >> 8) & 0xFF), (u8)(addr & 0xFF)); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t mb_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + mb_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static struct bin_attribute mb_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = EEPROM_SIZE, + .read = mb_eeprom_read, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int mb_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x50. So decline + attaching to addresses >= 0x51 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x56) { + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + return -ENODEV; + } + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int mb_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &mb_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int mb_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &mb_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id mb_eeprom_id[] = { + { "mb_eeprom", 0 }, + { } +}; + +static struct i2c_driver mb_eeprom_driver = { + .driver = { + .name = "mb_eeprom", + }, + .probe = mb_eeprom_probe, + .remove = mb_eeprom_remove, + .id_table = mb_eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = mb_eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(mb_eeprom_driver); + +MODULE_AUTHOR("Wade "); +MODULE_DESCRIPTION("Ingrasys S8810-32Q Mother Board EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/ingrasys_s8810_32q_platform.h b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/ingrasys_s8810_32q_platform.h new file mode 100644 index 000000000000..a88755946e9a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/ingrasys_s8810_32q_platform.h @@ -0,0 +1,148 @@ +#ifndef _S8810_32Q_PLATFORM_H +#define _S8810_32Q_PLATFORM_H + +#include + +// remove debug before release +#define DEBUG + +enum bus_order { + I2C_BUS_MAIN, + MUX_9548_0_CH0, + MUX_9548_0_CH1, + MUX_9548_0_CH2, + MUX_9548_0_CH3, + MUX_9548_0_CH4, + MUX_9548_0_CH5, + MUX_9548_0_CH6, + MUX_9548_0_CH7, + MUX_9548_1_CH0, + MUX_9548_1_CH1, + MUX_9548_1_CH2, + MUX_9548_1_CH3, + MUX_9548_1_CH4, + MUX_9548_1_CH5, + MUX_9548_1_CH6, + MUX_9548_1_CH7, + MUX_9546_0_CH0, + MUX_9546_0_CH1, + MUX_9546_0_CH2, + MUX_9546_0_CH3, + MUX_9546_1_CH0, + MUX_9546_1_CH1, + MUX_9546_1_CH2, + MUX_9546_1_CH3, + MUX_9548_2_CH0, + MUX_9548_2_CH1, + MUX_9548_2_CH2, + MUX_9548_2_CH3, + MUX_9548_2_CH4, + MUX_9548_2_CH5, + MUX_9548_2_CH6, + MUX_9548_2_CH7, + MUX_9548_3_CH0, + MUX_9548_3_CH1, + MUX_9548_3_CH2, + MUX_9548_3_CH3, + MUX_9548_3_CH4, + MUX_9548_3_CH5, + MUX_9548_3_CH6, + MUX_9548_3_CH7, + MUX_9548_4_CH0, + MUX_9548_4_CH1, + MUX_9548_4_CH2, + MUX_9548_4_CH3, + MUX_9548_4_CH4, + MUX_9548_4_CH5, + MUX_9548_4_CH6, + MUX_9548_4_CH7, + MUX_9548_5_CH0, + MUX_9548_5_CH1, + MUX_9548_5_CH2, + MUX_9548_5_CH3, + MUX_9548_5_CH4, + MUX_9548_5_CH5, + MUX_9548_5_CH6, + MUX_9548_5_CH7, + MUX_9548_6_CH0, + MUX_9548_6_CH1, + MUX_9548_6_CH2, + MUX_9548_6_CH3, + MUX_9548_6_CH4, + MUX_9548_6_CH5, + MUX_9548_6_CH6, + MUX_9548_6_CH7, + MUX_9548_7_CH0, + MUX_9548_7_CH1, + MUX_9548_7_CH2, + MUX_9548_7_CH3, + MUX_9548_7_CH4, + MUX_9548_7_CH5, + MUX_9548_7_CH6, + MUX_9548_7_CH7, + MUX_9548_8_CH0, + MUX_9548_8_CH1, + MUX_9548_8_CH2, + MUX_9548_8_CH3, + MUX_9548_8_CH4, + MUX_9548_8_CH5, + MUX_9548_8_CH6, + MUX_9548_8_CH7, + MUX_9548_9_CH0, + MUX_9548_9_CH1, + MUX_9548_9_CH2, + MUX_9548_9_CH3, + MUX_9548_9_CH4, + MUX_9548_9_CH5, + MUX_9548_9_CH6, + MUX_9548_9_CH7, + MUX_9548_10_CH0, + MUX_9548_10_CH1, + MUX_9548_10_CH2, + MUX_9548_10_CH3, + MUX_9548_10_CH4, + MUX_9548_10_CH5, + MUX_9548_10_CH6, + MUX_9548_10_CH7, +}; + +#define I2C_ADDR_MUX_9555_0 (0x20) +#define I2C_ADDR_MUX_9555_1 (0x24) +#define I2C_ADDR_MUX_9555_2 (0x25) +#define I2C_ADDR_MUX_9555_3 (0x26) +#define I2C_ADDR_MUX_9539_0 (0x76) +#define I2C_ADDR_MUX_9539_1 (0x76) +#define I2C_BUS_FAN_STATUS (I2C_BUS_MAIN) +#define I2C_BUS_SYS_LED (MUX_9548_1_CH1) + +#define NUM_OF_I2C_MUX (11) +#define NUM_OF_CPLD (5) +#define NUM_OF_QSFP_PORT (64) +#define NUM_OF_SFP_PORT (2) +#define QSFP_EEPROM_I2C_ADDR (0x50) + +enum gpio_reg { + REG_PORT0_IN, + REG_PORT1_IN, + REG_PORT0_OUT, + REG_PORT1_OUT, + REG_PORT0_POL, + REG_PORT1_POL, + REG_PORT0_DIR, + REG_PORT1_DIR, +}; + +struct ing_i2c_board_info { + int ch; + int size; + struct i2c_board_info *board_info; +}; + +struct i2c_init_data { + __u16 ch; + __u16 addr; + __u8 reg; + __u8 value; +}; + +#endif diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/ingrasys_s8810_32q_psu.c b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/ingrasys_s8810_32q_psu.c new file mode 100644 index 000000000000..ae34c8eb33ed --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/modules/ingrasys_s8810_32q_psu.c @@ -0,0 +1,393 @@ +/* + * S8810-32Q PSU driver + * + * Copyright (C) 2017 Ingrasys, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ingrasys_s8810_32q_platform.h" + +static ssize_t show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf); +static struct s8810_psu_data *s8810_psu_update_status(struct device *dev); +static struct s8810_psu_data *s8810_psu_update_eeprom(struct device *dev); +static int s8810_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len); + + +#define DRIVER_NAME "psu" + +// Addresses scanned +static const unsigned short normal_i2c[] = { 0x51, I2C_CLIENT_END }; + +/* PSU EEPROM SIZE */ +#define EEPROM_SZ 256 +#define READ_EEPROM 1 +#define NREAD_EEPROM 0 + +static struct i2c_client cpld_client; + +/* CPLD Registers */ +#define REG_PSU_PG 0x02 +#define REG_PSU_PRSNT 0x03 + +/* CPLD Pins */ +#define PSU1_PRSNT_L 0 +#define PSU2_PRSNT_L 1 +#define PSU1_PWROK 3 +#define PSU2_PWROK 4 + + +/* Driver Private Data */ +struct s8810_psu_data { + struct mutex lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + char eeprom[EEPROM_SZ]; /* psu eeprom data */ + char psuABS; /* PSU absent */ + char psuPG; /* PSU power good */ +}; + +enum psu_index +{ + s8810_psu1, + s8810_psu2 +}; + +/* + * display power good attribute + */ +static ssize_t +show_psu_pg(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s8810_psu_data *data = s8810_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuPG; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + +/* + * display power absent attribute + */ +static ssize_t +show_psu_abs(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s8810_psu_data *data = s8810_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuABS; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + + +/* + * sysfs attributes for psu + */ +static DEVICE_ATTR(psu_pg, S_IRUGO, show_psu_pg, NULL); +static DEVICE_ATTR(psu_abs, S_IRUGO, show_psu_abs, NULL); +static DEVICE_ATTR(psu_eeprom, S_IRUGO, show_psu_eeprom, NULL); + +static struct attribute *s8810_psu_attributes[] = { + &dev_attr_psu_pg.attr, + &dev_attr_psu_abs.attr, + &dev_attr_psu_eeprom.attr, + NULL +}; + +/* + * display psu eeprom content + */ +static ssize_t +show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct s8810_psu_data *data = s8810_psu_update_eeprom(dev); + + memcpy(buf, (char *)data->eeprom, EEPROM_SZ); + return EEPROM_SZ; +} + +static const struct attribute_group s8810_psu_group = { + .attrs = s8810_psu_attributes, +}; + +/* + * check gpio expander is accessible + */ +static int +cpld_detect(struct i2c_client *client) +{ + if (i2c_smbus_read_byte_data(client, REG_PSU_PG) < 0) { + return -ENODEV; + } + + return 0; +} + +/* + * client address init + */ +static void +i2c_devices_client_address_init(struct i2c_client *client) +{ + cpld_client = *client; + cpld_client.addr = 0x33; +} + +static int +s8810_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct s8810_psu_data *data; + int status, err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct s8810_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct s8810_psu_data)); + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->lock); + + i2c_devices_client_address_init(client); + + err = cpld_detect(&cpld_client); + if (err) { + dev_info(&client->dev, "cpld detect failure\n"); + return err; + } + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &s8810_psu_group); + if (status) { + goto exit_free; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &s8810_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int +s8810_psu_remove(struct i2c_client *client) +{ + struct s8810_psu_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &s8810_psu_group); + kfree(data); + + return 0; +} + + +/* + * psu eeprom read utility + */ +static int +s8810_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len) +{ + int i=0, ret=0; + int blk_max = 32; //max block read size + + /* read eeprom, 32 * 8 = 256 bytes */ + for (i=0; i < EEPROM_SZ/blk_max; i++) { + ret = i2c_smbus_read_i2c_block_data(client, (i*blk_max), blk_max, + data + (i*blk_max)); + if (ret < 0) { + return ret; + } + } + return ret; +} + +/* + * update eeprom content + */ +static struct s8810_psu_data +*s8810_psu_update_eeprom(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s8810_psu_data *data = i2c_get_clientdata(client); + s32 status = 0; + char psu_pg = 0; + char psu_prsnt = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + if (time_after(jiffies, data->last_updated + 300 * HZ) + || !data->valid) { + + /* Read psu status */ + + psu_pg = i2c_smbus_read_byte_data(&(cpld_client), REG_PSU_PG); + psu_prsnt = i2c_smbus_read_byte_data(&(cpld_client), REG_PSU_PRSNT); + + /*read psu status from io expander*/ + + if (data->index == s8810_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (psu_pg >> psu_pwrok) & 0x1; + data->psuABS = (psu_prsnt >> psu_prsnt_l) & 0x1; + + /* Read eeprom */ + if (!data->psuABS) { + //clear local eeprom data + memset(data->eeprom, 0, EEPROM_SZ); + + //read eeprom + status = s8810_psu_read_block(client, 0, data->eeprom, + ARRAY_SIZE(data->eeprom)); + + if (status < 0) { + memset(data->eeprom, 0, EEPROM_SZ); + dev_err(&client->dev, "Read eeprom failed, status=(%d)\n", status); + } else { + data->valid = 1; + } + } else { + memset(data->eeprom, 0, EEPROM_SZ); + } + data->last_updated = jiffies; + } + + mutex_unlock(&data->lock); + + return data; +} + +/* + * update psu status + */ +static struct s8810_psu_data +*s8810_psu_update_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s8810_psu_data *data = i2c_get_clientdata(client); + char psu_pg = 0; + char psu_prsnt = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + /* Read psu status */ + + psu_pg = i2c_smbus_read_byte_data(&(cpld_client), REG_PSU_PG); + psu_prsnt = i2c_smbus_read_byte_data(&(cpld_client), REG_PSU_PRSNT); + + /*read psu status from io expander*/ + + if (data->index == s8810_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (psu_pg >> psu_pwrok) & 0x1; + data->psuABS = (psu_prsnt >> psu_prsnt_l) & 0x1; + + mutex_unlock(&data->lock); + + return data; +} + +static const struct i2c_device_id s8810_psu_id[] = { + { "psu1", s8810_psu1 }, + { "psu2", s8810_psu2 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, s8810_psu_id); + +static struct i2c_driver s8810_psu_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = s8810_psu_probe, + .remove = s8810_psu_remove, + .id_table = s8810_psu_id, + .address_list = normal_i2c, +}; + +static int __init s8810_psu_init(void) +{ + return i2c_add_driver(&s8810_psu_driver); +} + +static void __exit s8810_psu_exit(void) +{ + i2c_del_driver(&s8810_psu_driver); +} + +module_init(s8810_psu_init); +module_exit(s8810_psu_exit); + +MODULE_AUTHOR("Jason Tsai "); +MODULE_DESCRIPTION("S8810-32Q psu driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/service/qsfp-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/service/qsfp-monitor.service new file mode 100644 index 000000000000..3d69fdae0f87 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/service/qsfp-monitor.service @@ -0,0 +1,15 @@ +[Unit] +Description= This QSFP Monitor service is to setup QSFP SI. +Requires=s8810-32q-monitor.service +After=s8810-32q-monitor.service + +[Service] +ExecStart=/usr/sbin/qsfp_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/service/s8810-32q-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/service/s8810-32q-monitor.service new file mode 100644 index 000000000000..644efe443256 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/service/s8810-32q-monitor.service @@ -0,0 +1,19 @@ +[Unit] +Description= This Platform Monitor service is to initialize platform and monitor platform. +Before=platform-monitor.service +After=sysinit.target +Wants=fancontrol.service +Wants=qsfp-monitor.service +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/sbin/i2c_utils.sh i2c_init +ExecStart=/usr/sbin/s8810_32q_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh new file mode 100644 index 000000000000..98ffb9d8d2f4 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/i2c_utils.sh @@ -0,0 +1,1452 @@ +#!/bin/bash + +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +EXEC_FUNC=${1} +COLOR_LED=${2} +QSFP_PORT=${2} +QSFP_ACTION=${2} +MB_EEPROM_ACTION=${2} +ONOFF_LED=${3} +FAN_TRAY=${4} + +############################################################ +# Distributor ID: Debian +# Description: Debian GNU/Linux 8.6 (jessie) +# Release: 8.6 +# Codename: jessie +# Linux debian 3.16.0-4-amd64 #1 +# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux +############################################################ + +# Color Definition +COLOR_TITLE="\e[1;32m" ### Green ### +COLOR_WARNING="\e[1;33m" ### Yellow ### +COLOR_ERROR="\e[1;31m" ### Red ### +COLOR_END="\e[0m" ### END ### + +NUM_I801_DEVICE=0 +NUM_ISMT_DEVICE=$(( ${NUM_I801_DEVICE} + 1 )) + +#MUX PCA9548#0 +NUM_MUX_9548_0_CHAN0=$(( ${NUM_I801_DEVICE} + 2 )) +NUM_MUX_9548_0_CHAN1=$(( ${NUM_I801_DEVICE} + 3 )) +NUM_MUX_9548_0_CHAN2=$(( ${NUM_I801_DEVICE} + 4 )) +#NUM_MUX_9548_0_CHAN3=$(( ${NUM_I801_DEVICE} + 5 )) +#NUM_MUX_9548_0_CHAN4=$(( ${NUM_I801_DEVICE} + 6 )) +#NUM_MUX_9548_0_CHAN5=$(( ${NUM_I801_DEVICE} + 7 )) +#NUM_MUX_9548_0_CHAN6=$(( ${NUM_I801_DEVICE} + 8 )) +#NUM_MUX_9548_0_CHAN7=$(( ${NUM_I801_DEVICE} + 9 )) + +#MUX PCA9548#1 +NUM_MUX_9548_1_CHAN0=$(( ${NUM_I801_DEVICE} + 10 )) +NUM_MUX_9548_1_CHAN1=$(( ${NUM_I801_DEVICE} + 11 )) +NUM_MUX_9548_1_CHAN2=$(( ${NUM_I801_DEVICE} + 12 )) +NUM_MUX_9548_1_CHAN3=$(( ${NUM_I801_DEVICE} + 13 )) +NUM_MUX_9548_1_CHAN4=$(( ${NUM_I801_DEVICE} + 14 )) +NUM_MUX_9548_1_CHAN5=$(( ${NUM_I801_DEVICE} + 15 )) +NUM_MUX_9548_1_CHAN6=$(( ${NUM_I801_DEVICE} + 16 )) +NUM_MUX_9548_1_CHAN7=$(( ${NUM_I801_DEVICE} + 17 )) + +NUM_MUX_9548_2_CHAN0=$(( ${NUM_I801_DEVICE} + 18 )) +NUM_MUX_9548_3_CHAN0=$(( ${NUM_I801_DEVICE} + 26 )) +NUM_MUX_9548_4_CHAN0=$(( ${NUM_I801_DEVICE} + 34 )) +NUM_MUX_9548_5_CHAN0=$(( ${NUM_I801_DEVICE} + 42 )) + +#MUX Alias +I2C_BUS_PSU1_EEPROM=${NUM_MUX_9548_0_CHAN1} +I2C_BUS_PSU2_EEPROM=${NUM_MUX_9548_0_CHAN2} +I2C_BUS_FAN_STATUS=${NUM_MUX_9548_1_CHAN0} +I2C_BUS_LED_BOARD=${NUM_MUX_9548_1_CHAN0} +I2C_BUS_MB_EEPROM=${NUM_MUX_9548_1_CHAN2} + +PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_SYS_GPIO="/sys/class/gpio" +PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" +PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon1" +PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_ISMT_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_ISMT_DEVICE}" +#PATH for MUX PCA9548#0 +PATH_MUX_9548_0_CHAN0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CHAN0}" +PATH_MUX_9548_0_CHAN1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CHAN1}" +PATH_MUX_9548_0_CHAN2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CHAN2}" +#PATH for MUX PCA9548#1 +PATH_MUX_9548_1_CHAN0="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN0}" +PATH_MUX_9548_1_CHAN1="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}" +PATH_MUX_9548_1_CHAN2="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}" +PATH_MUX_9548_1_CHAN3="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN3}" +PATH_MUX_9548_1_CHAN4="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN4}" +PATH_MUX_9548_1_CHAN5="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN5}" +PATH_MUX_9548_1_CHAN6="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN6}" +PATH_MUX_9548_1_CHAN7="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN7}" + +#i2cmap and gpiomap path +PATH_GPIOMAP=/tmp/gpiomap +PATH_I2CMAP=/tmp/i2cmap + +I2C_ADDR_MUX_9548_0=0x70 +I2C_ADDR_MUX_9548_1=0x70 +I2C_ADDR_MUX_9548_2=0x71 +I2C_ADDR_MUX_9548_3=0x71 +I2C_ADDR_MUX_9548_4=0x71 +I2C_ADDR_MUX_9548_5=0x71 +I2C_ADDR_DDR3=0x50 +I2C_ADDR_RTC=0x68 +I2C_ADDR_CPLD=0x33 +I2C_ADDR_HWM=0x2F +I2C_ADDR_MUX_9535_FAN=0x20 +I2C_ADDR_MUX_9535_LED=0x22 +I2C_ADDR_MUX_9535_0=0x20 +I2C_ADDR_MUX_9535_1=0x21 +I2C_ADDR_MUX_9535_2=0x22 +I2C_ADDR_MUX_9535_3=0x23 +I2C_ADDR_MUX_9535_4=0x20 +I2C_ADDR_MUX_9535_5=0x21 +I2C_ADDR_MUX_9535_6=0x22 +I2C_ADDR_MUX_9535_7=0x23 +I2C_ADDR_MUX_9535_8=0x20 +I2C_ADDR_MUX_9535_9=0x21 +I2C_ADDR_MUX_9535_10=0x22 +I2C_ADDR_MB_EEPROM=0x56 +I2C_ADDR_QSFP_EEPROM=0x50 +I2C_ADDR_PSU_EEPROM=0x51 + +#sysfs +PATH_SYSFS_PSU1="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU1_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU_EEPROM)" +PATH_SYSFS_PSU2="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU2_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU_EEPROM)" + +#Active High/Low +ACTIVE_LOW=1 +ACTIVE_HIGH=0 +#GPIO Direction In/Out +DIR_IN=in +DIR_OUT=out + +#Power Supply Status +PSU_DC_ON=1 +PSU_DC_OFF=0 +PSU_EXIST=1 +PSU_NOT_EXIST=0 + +#W83795 Registers +REG_BANK_SEL=0x00 +REG_VOLT_CTRL1=0x02 +REG_VOLT_CTRL2=0x03 +REG_TEMP_CTRL1=0x04 +REG_TEMP_CTRL2=0x05 + +#PCA9535 Registers +REG_IN_0=0 +REG_IN_1=1 +REG_OUT_0=2 +REG_OUT_1=3 +REG_POLARITY_0=4 +REG_POLARITY_1=5 +REG_CFG_0=6 +REG_CFG_1=7 + +#Bit Mask +BIT_MASK=(1 2 4 8 16 32 64 128) + + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} i2c_init" + echo " : ${0} i2c_deinit" + echo " : ${0} i2c_temp_init" + echo " : ${0} i2c_fan_init" + echo " : ${0} i2c_volmon_init" + echo " : ${0} i2c_io_exp_init" + echo " : ${0} i2c_gpio_init" + echo " : ${0} i2c_gpio_deinit" + echo " : ${0} i2c_psu_eeprom_get" + echo " : ${0} i2c_mb_eeprom_get" + echo " : ${0} i2c_qsfp_eeprom_get [1-32]" + echo " : ${0} i2c_qsfp_eeprom_init new|delete" + echo " : ${0} i2c_mb_eeprom_init new|delete" + echo " : ${0} i2c_qsfp_status_get [1-32]" + echo " : ${0} i2c_qsfp_type_get [1-32]" + echo " : ${0} i2c_board_type_get" + echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_psu_status_set" + echo " : ${0} i2c_led_fan_status_set" + echo " : ${0} i2c_led_fan_tray_status_set" + echo " : ${0} i2c_led_fan_tray_test" + echo " : ${0} i2c_cpld_version" + echo " : ${0} i2c_test_all" + echo " : ${0} i2c_led_test" + echo " : ${0} i2c_sys_led green|amber on|off" + echo " : ${0} i2c_fan_led green|amber on|off" + echo " : ${0} i2c_psu1_led green|amber on|off" + echo " : ${0} i2c_psu2_led green|amber on|off" + echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]" + echo "----------------------------------------------------" +} + +#Pause function +function _pause { + read -p "$*" +} + +#Retry command function +function _retry { + local i + for i in {1..5}; + do + eval "${*}" && break || echo "retry"; sleep 1; + done +} + +#set i2cmap +function _set_i2cmap { + local i2c_n=$1 + local alias=$2 + + #create i2cmap dir if not exist + mkdir -p $PATH_I2CMAP + + #check i2c_n exists in sysfs + if [ ! -L ${PATH_SYS_I2C_DEVICES}/i2c-${i2c_n} ]; then + echo "${PATH_SYS_I2C_DEVICES}/i2c-${i2c_n} does not exist." + return + fi + + #create or update link + ln -sf ${PATH_SYS_I2C_DEVICES}/i2c-${i2c_n} ${PATH_I2CMAP}/${alias} +} + +#clear i2cmap +function _clear_i2cmap { + #delete i2cmap dir + rm -rf ${PATH_I2CMAP}/ +} + + +#I2C Init +function _i2c_init { + echo "=========================================================" + echo "# Description: I2C Init" + echo "=========================================================" + + rmmod i2c_ismt + rmmod i2c_i801 + modprobe i2c_i801 + modprobe i2c_ismt + modprobe i2c_dev + modprobe i2c_mux_pca954x force_deselect_on_exit=1 + + #add MUX PCA9548#0 on I801 + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_0_CHAN0}" ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_0}' > ${PATH_I801_DEVICE}/new_device" + _set_i2cmap ${NUM_MUX_9548_0_CHAN0} "PCA9548_0" + else + echo "pca9548#0 ${I2C_ADDR_MUX_9548_0} already init." + fi + #add MUX PCA9548#1 on ISMT + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN0}" ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_1}' > ${PATH_ISMT_DEVICE}/new_device" + _set_i2cmap ${NUM_MUX_9548_1_CHAN0} "PCA9548_1" + else + echo "pca9548#1 ${I2C_ADDR_MUX_9548_1} already init." + fi + #add MUX PCA9548#2 on PCA9548#1 + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_2_CHAN0}" ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_2}' > ${PATH_MUX_9548_1_CHAN4}/new_device" + _set_i2cmap ${NUM_MUX_9548_2_CHAN0} "PCA9548_2" + else + echo "pca9548#2 ${I2C_ADDR_MUX_9548_2} already init." + fi + #add MUX PCA9548#3 on PCA9548#1 + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_3_CHAN0}" ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_3}' > ${PATH_MUX_9548_1_CHAN5}/new_device" + _set_i2cmap ${NUM_MUX_9548_3_CHAN0} "PCA9548_3" + else + echo "pca9548#3 ${I2C_ADDR_MUX_9548_3} already init." + fi + #add MUX PCA9548#4 on PCA9548#1 + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_4_CHAN0}" ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_4}' > ${PATH_MUX_9548_1_CHAN6}/new_device" + _set_i2cmap ${NUM_MUX_9548_4_CHAN0} "PCA9548_4" + else + echo "pca9548#4 ${I2C_ADDR_MUX_9548_4} already init." + fi + #add MUX PCA9548#5 on PCA9548#1 + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_5_CHAN0}" ]; then + _retry "echo 'pca9548 ${I2C_ADDR_MUX_9548_5}' > ${PATH_MUX_9548_1_CHAN7}/new_device" + _set_i2cmap ${NUM_MUX_9548_5_CHAN0} "PCA9548_5" + else + echo "pca9548#5 ${I2C_ADDR_MUX_9548_5} already init." + fi + #Init CPLD LED_CLR Register (Front Port LED) + i2cset -y ${NUM_I801_DEVICE} ${I2C_ADDR_CPLD} 0x34 0x10 + + rmmod coretemp + rmmod jc42 + rmmod w83795 + _i2c_temp_init + _i2c_volmon_init + modprobe coretemp + modprobe w83795 + modprobe jc42 + modprobe eeprom + modprobe eeprom_mb + modprobe gpio-pca953x + _i2c_fan_init + _i2c_io_exp_init + _i2c_gpio_init + _i2c_psu_init + _i2c_qsfp_eeprom_init "new" + _i2c_mb_eeprom_init "new" + _i2c_led_psu_status_set + _i2c_led_fan_status_set + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + _config_rmem +} + +#I2C Deinit +function _i2c_deinit { + _i2c_gpio_deinit + for mod in coretemp jc42 w83795 eeprom_mb gpio-pca953x i2c_mux_pca954x i2c_ismt i2c_i801 ingrasys_s8810_32q_psu; + do + [ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod + done + _clear_i2cmap +} + +#Temperature sensor Init +function _i2c_temp_init { + echo -n "TEMP INIT..." + #select bank0 + i2cset -y -r ${NUM_I801_DEVICE} ${I2C_ADDR_HWM} ${REG_BANK_SEL} 0x80 + #enable TR1, TR2, TR3 temperature monitoring + i2cset -y -r ${NUM_I801_DEVICE} ${I2C_ADDR_HWM} ${REG_TEMP_CTRL2} 0x7F + + # CLKIN clock frequency set as 48Mhz + i2cset -y -r ${NUM_I801_DEVICE} ${I2C_ADDR_HWM} 0x01 0x1C +} + +#FAN Init +function _i2c_fan_init { + + local init_fan_speed=120 + echo -n "FAN INIT..." + if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then + #Init Fan Speed + echo $init_fan_speed > ${PATH_HWMON_W83795_DEVICE}/device/pwm1 + echo $init_fan_speed > ${PATH_HWMON_W83795_DEVICE}/device/pwm2 + echo "SUCCESS" + else + echo "FAIL, W83795 not found in path ${PATH_HWMON_W83795_DEVICE}" + fi +} + +#VOLMON Init +function _i2c_volmon_init { + #3.3V 3VDD + #VSEN1 ROV + #VSEN4 1V + #VSEN5 1.8V + #VSEN7 5V + echo -n "VOLMON INIT..." + #select bank0 + i2cset -y -r ${NUM_I801_DEVICE} ${I2C_ADDR_HWM} ${REG_BANK_SEL} 0x80 + #enable voltage monitoring VSEN1-8 + i2cset -y -r ${NUM_I801_DEVICE} ${I2C_ADDR_HWM} ${REG_VOLT_CTRL1} 0xFF + #enable voltage monitoring 3VDD and 3VBAT + i2cset -y -r ${NUM_I801_DEVICE} ${I2C_ADDR_HWM} ${REG_VOLT_CTRL2} 0x50 + #disable voltage monitoring VSEN12 and VSEN13 + i2cset -y -r ${NUM_I801_DEVICE} ${I2C_ADDR_HWM} ${REG_TEMP_CTRL1} 0x00 + echo "Done" +} + +#IO Expander Init +function _i2c_io_exp_init { + echo "=========================================================" + echo "# Description: I2C IO Expander Init" + echo "=========================================================" + + #SMBUS1 + + echo "Init FAN Status IO Expander" + #PCA9535_FAN FAN_STATUS + #command byte 2/3, output logic level is 0 + #command byte 4/5, polarity is not inverted + #command byte 6/7, direction is input + i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_FAN} ${REG_OUT_0} 0x11 + i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_FAN} ${REG_OUT_1} 0x11 + i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_FAN} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_FAN} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_FAN} ${REG_CFG_0} 0xCC + i2cset -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_FAN} ${REG_CFG_1} 0xCC + + echo "Init LED Status IO Expander" + #PCA9535_LED LED_BOARD + #command byte 2/3, output logic level is 0 + #command byte 4/5, polarity is not inverted + #command byte 6/7, direction is output + i2cset -y -r ${I2C_BUS_LED_BOARD} ${I2C_ADDR_MUX_9535_LED} ${REG_OUT_0} 0xFF #active low + i2cset -y -r ${I2C_BUS_LED_BOARD} ${I2C_ADDR_MUX_9535_LED} ${REG_OUT_1} 0xFF #active low + i2cset -y -r ${I2C_BUS_LED_BOARD} ${I2C_ADDR_MUX_9535_LED} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${I2C_BUS_LED_BOARD} ${I2C_ADDR_MUX_9535_LED} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${I2C_BUS_LED_BOARD} ${I2C_ADDR_MUX_9535_LED} ${REG_CFG_0} 0x00 + i2cset -y -r ${I2C_BUS_LED_BOARD} ${I2C_ADDR_MUX_9535_LED} ${REG_CFG_1} 0x00 + + #PCA9535#0-10 zQSFP + + echo "Init ZQSFP IO Expander" + + echo "set ZQSFP ABS" + #zQSFP 0-31 ABS + #command byte 4/5, polarity is not inverted + #command byte 6/7, direction is input + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_0} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_0} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_0} ${REG_CFG_0} 0xFF + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_0} ${REG_CFG_1} 0xFF + + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_1} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_1} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_1} ${REG_CFG_0} 0xFF + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_1} ${REG_CFG_1} 0xFF + + echo "set ZQSFP INT" + #zQSFP 0-31 INT + #command byte 4/5, polarity is not inverted + #command byte 6/7, direction is input + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_2} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_2} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_2} ${REG_CFG_0} 0xFF + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_2} ${REG_CFG_1} 0xFF + + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_3} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_3} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_3} ${REG_CFG_0} 0xFF + i2cset -y -r ${NUM_MUX_9548_1_CHAN1} ${I2C_ADDR_MUX_9535_3} ${REG_CFG_1} 0xFF + + echo "set ZQSFP LP_MODE" + #zQSFP 0-31 LP_MODE + #command byte 2/3, output logic level is 0 + #command byte 4/5, polarity is not inverted + #command byte 6/7, direction is output + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_4} ${REG_OUT_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_4} ${REG_OUT_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_4} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_4} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_4} ${REG_CFG_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_4} ${REG_CFG_1} 0x00 + + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_5} ${REG_OUT_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_5} ${REG_OUT_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_5} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_5} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_5} ${REG_CFG_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_5} ${REG_CFG_1} 0x00 + + echo "set ZQSFP RST" + #zQSFP 0-31 RST + #command byte 2/3, output logic level is 0 + #command byte 4/5, polarity is not inverted + #command byte 6/7, direction is output + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_6} ${REG_OUT_0} 0xFF + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_6} ${REG_OUT_1} 0xFF + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_6} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_6} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_6} ${REG_CFG_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_6} ${REG_CFG_1} 0x00 + + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_7} ${REG_OUT_0} 0xFF + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_7} ${REG_OUT_1} 0xFF + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_7} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_7} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_7} ${REG_CFG_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN2} ${I2C_ADDR_MUX_9535_7} ${REG_CFG_1} 0x00 + + echo "set ZQSFP Mode Select" + #zQSFP 0-31 Mode Select + #command byte 2/3, output logic level is 0 + #command byte 4/5, polarity is not inverted + #command byte 6/7, direction is output + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_8} ${REG_OUT_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_8} ${REG_OUT_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_8} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_8} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_8} ${REG_CFG_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_8} ${REG_CFG_1} 0x00 + + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_9} ${REG_OUT_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_9} ${REG_OUT_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_9} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_9} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_9} ${REG_CFG_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_9} ${REG_CFG_1} 0x00 + + #ZQSFP ABS0_15, ABS16_31, INT0_15, INT16_31, PSU1_PWROFF, PSU2_PWROFF + #command byte 2/3, output logic level is 0 + #command byte 4/5, polarity is not inverted + #command byte 6/7, I/O 1.0 and I/O 1.1 are output, others are input + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_10} ${REG_OUT_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_10} ${REG_OUT_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_10} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_10} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_10} ${REG_CFG_0} 0xFF + i2cset -y -r ${NUM_MUX_9548_1_CHAN3} ${I2C_ADDR_MUX_9535_10} ${REG_CFG_1} 0xFC +} + +#GPIO Init Utility Function +function _gpio_export { + local gpio_n=$1 + local direction=$2 + local active_low=$3 + local value=$4 + + if [ -z "${gpio_n}" ]; then + echo "[_gpio_init] gpio_n(${gpio_n}) is not provided" + return + fi + if [ "${gpio_n}" -lt "0" ] || [ "${gpio_n}" -gt "255" ]; then + echo "[_gpio_init] gpio_n(${gpio_n}) is invalid value" + return + fi + + #export gpio + echo ${gpio_n} > ${PATH_SYS_GPIO}/export + + #set gpio direction + echo ${direction} > ${PATH_SYS_GPIO}/gpio${gpio_n}/direction + + #set gpio active_low + echo ${active_low} > ${PATH_SYS_GPIO}/gpio${gpio_n}/active_low + + #set value + if [ ! -z "${value}" ]; then + echo ${value} > ${PATH_SYS_GPIO}/gpio${gpio_n}/value + fi +} + +#set gpiomap +function _set_gpiomap { + local gpio_n=$1 + local alias=$2 + + #create gpiomap dir if not exist + mkdir -p $PATH_GPIOMAP + + #check gpio_n exists in sysfs + if [ ! -L ${PATH_SYS_GPIO}/gpio${gpio_n} ]; then + echo "${PATH_SYS_GPIO}/gpio${gpio_n} does not exist." + return + fi + + #create or update link + ln -sf ${PATH_SYS_GPIO}/gpio${gpio_n} ${PATH_GPIOMAP}/${alias} +} + +#clear gpiomap +function _clear_gpiomap { + #delete gpiomap dir + rm -rf ${PATH_GPIOMAP} +} + +#GPIO Init +function _i2c_gpio_init { + local i=0 + + #ABS Port 0-31 + echo "pca9535 ${I2C_ADDR_MUX_9535_1}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/new_device + echo "pca9535 ${I2C_ADDR_MUX_9535_0}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/new_device + for i in {224..255} + do + _gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW} + _set_gpiomap ${i} "QSFP$(( i - 223 ))_ABS" + done + + #INT Port 0-31 + echo "pca9535 ${I2C_ADDR_MUX_9535_3}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/new_device + echo "pca9535 ${I2C_ADDR_MUX_9535_2}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/new_device + for i in {192..223} + do + _gpio_export ${i} ${DIR_IN} ${ACTIVE_LOW} + _set_gpiomap ${i} "QSFP$(( i - 191 ))_INT" + done + + #LP Mode Port 0-31 + echo "pca9535 ${I2C_ADDR_MUX_9535_5}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/new_device + echo "pca9535 ${I2C_ADDR_MUX_9535_4}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/new_device + for i in {160..191} + do + _gpio_export ${i} ${DIR_OUT} ${ACTIVE_HIGH} + _set_gpiomap ${i} "QSFP$(( i - 159 ))_LPMODE" + done + + #RST Port 0-31 + echo "pca9535 ${I2C_ADDR_MUX_9535_7}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/new_device + echo "pca9535 ${I2C_ADDR_MUX_9535_6}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/new_device + for i in {128..159} + do + _gpio_export ${i} ${DIR_OUT} ${ACTIVE_LOW} + _set_gpiomap ${i} "QSFP$(( i - 127 ))_RST" + #Reset QSFP + echo "${ACTIVE_LOW}" > ${PATH_SYS_GPIO}/gpio${i}/value + echo "${ACTIVE_HIGH}" > ${PATH_SYS_GPIO}/gpio${i}/value + done + + #MODSEL Port 0-31 + echo "pca9535 ${I2C_ADDR_MUX_9535_9}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN3}/new_device + echo "pca9535 ${I2C_ADDR_MUX_9535_8}" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN3}/new_device + for i in {96..127} + do + _gpio_export ${i} ${DIR_OUT} ${ACTIVE_LOW} + _set_gpiomap ${i} "QSFP$(( i - 95 ))_MODSEL" + done +} + +#GPIO DeInit +function _i2c_gpio_deinit { + echo ${I2C_ADDR_MUX_9535_0} > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/delete_device + echo ${I2C_ADDR_MUX_9535_1} > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/delete_device + echo ${I2C_ADDR_MUX_9535_2} > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/delete_device + echo ${I2C_ADDR_MUX_9535_3} > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN1}/delete_device + echo ${I2C_ADDR_MUX_9535_4} > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/delete_device + echo ${I2C_ADDR_MUX_9535_5} > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_1_CHAN2}/delete_device + _clear_gpiomap +} + +#Set FAN Tray LED +function _i2c_led_fan_tray_status_set { + echo "FAN Tray Status Setup" + + #check W83795 exists in hwmon2 + if [ ! -e "${PATH_HWMON_W83795_DEVICE}" ]; then + echo "FAIL, W83795 not found in path ${PATH_HWMON_W83795_DEVICE}" + return + fi + #FAN Status get + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + + FAN_TRAY=1 + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + FAN_TRAY=2 + if [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + FAN_TRAY=3 + if [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + FAN_TRAY=4 + if [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi +} + +#Test FAN Tray LED +function _i2c_led_fan_tray_test { + echo "FAN Tray LED Test" + + for i in {1..4} + do + FAN_TRAY=$i + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + _pause 'Check Fan Tray ${FAN_TRAY} LED green light and Press [Enter] key to continue...' + + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + _pause 'Check Fan Tray ${FAN_TRAY} LED amber light and Press [Enter] key to continue...' + done +} +#Set FAN LED +function _i2c_led_fan_status_set { + echo "FAN Status Setup" + + #check W83795 exists in hwmon2 + if [ ! -e "${PATH_HWMON_W83795_DEVICE}" ]; then + echo "FAIL, W83795 not found in path ${PATH_HWMON_W83795_DEVICE}" + return + fi + + #PSU Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ] \ + && [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ] \ + && [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ] \ + && [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + fi +} + +#Set Power Supply LED +function _i2c_led_psu_status_set { + echo "PSU LED Status Setup" + + #PSU Status set + _i2c_psu_status + + #PSU1 Status + if [ "${psu1Exist}" == ${PSU_EXIST} ]; then + if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + + #PSU2 Status + if [ "${psu2Exist}" == ${PSU_EXIST} ]; then + if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi +} + +#LED Test +function _i2c_led_test { + echo "=========================================================" + echo "# Description: I2C LED TEST..." + echo "=========================================================" + #sys led (green) + _i2c_reset_led + COLOR_LED="green" + ONOFF_LED="on" + _i2c_sys_led + _pause 'Check SYS LED green light and Press [Enter] key to continue...' + #sys led (amber) + _i2c_reset_led + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_sys_led + _pause 'Check SYS LED amber light and Press [Enter] key to continue...' + + #FAN led (green) + _i2c_reset_led + COLOR_LED="green" + ONOFF_LED="on" + _i2c_fan_led + _pause 'Check FAN LED green light and Press [Enter] key to continue...' + #FAN led (amber) + _i2c_reset_led + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_fan_led + _pause 'Check FAN LED amber light and Press [Enter] key to continue...' + + #PSU2 led (green) + _i2c_reset_led + COLOR_LED="green" + ONOFF_LED="on" + _i2c_psu2_led + _pause 'Check PSU2 LED green light and Press [Enter] key to continue...' + #PSU2 led (amber) + _i2c_reset_led + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_psu2_led + _pause 'Check PSU2 LED amber light and Press [Enter] key to continue...' + + #PSU1 led (green) + _i2c_reset_led + COLOR_LED="green" + ONOFF_LED="on" + _i2c_psu1_led + _pause 'Check PSU1 LED green light and Press [Enter] key to continue...' + #PSU1 led (amber) + _i2c_reset_led + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_psu1_led + _pause 'Check PSU1 LED amber light and Press [Enter] key to continue...' + + #Turn OFF All LED + _i2c_reset_led + _pause 'Check turn off all LEDs and Press [Enter] key to continue...' + echo "done..." + + #sys led (green) + COLOR_LED="green" + ONOFF_LED="on" + _i2c_sys_led +} + +#Set QSFP Port variable +function _qsfp_port_i2c_var_set { + local port=$1 + case ${port} in + 1|2|3|4|5|6|7|8) + i2cbus=${NUM_MUX_9548_1_CHAN1} + regAddr=0x20 + dataAddr=0 + eeprombusbase=${NUM_MUX_9548_2_CHAN0} + gpioBase=224 + ;; + 9|10|11|12|13|14|15|16) + i2cbus=${NUM_MUX_9548_1_CHAN1} + regAddr=0x20 + dataAddr=1 + eeprombusbase=${NUM_MUX_9548_3_CHAN0} + gpioBase=224 + ;; + 17|18|19|20|21|22|23|24) + i2cbus=${NUM_MUX_9548_1_CHAN1} + regAddr=0x21 + dataAddr=0 + eeprombusbase=${NUM_MUX_9548_4_CHAN0} + gpioBase=240 + ;; + 25|26|27|28|29|30|31|32) + i2cbus=${NUM_MUX_9548_1_CHAN1} + regAddr=0x21 + dataAddr=1 + eeprombusbase=${NUM_MUX_9548_5_CHAN0} + gpioBase=240 + ;; + *) + echo "Please input 1~32" + ;; + esac +} + +#Set QSFP Port variable +function _qsfp_eeprom_var_set { + local port=$1 + eeprombusidx=$(( ${port} % 8)) + case $eeprombusidx in + 1) + eeprombus=$(( $eeprombusbase + 0 )) + ;; + 2) + eeprombus=$(( $eeprombusbase + 1 )) + ;; + 3) + eeprombus=$(( $eeprombusbase + 2 )) + ;; + 4) + eeprombus=$(( $eeprombusbase + 3 )) + ;; + 5) + eeprombus=$(( $eeprombusbase + 4 )) + ;; + 6) + eeprombus=$(( $eeprombusbase + 5 )) + ;; + 7) + eeprombus=$(( $eeprombusbase + 6 )) + ;; + 0) + eeprombus=$(( $eeprombusbase + 7 )) + ;; + esac + eepromAddr=${I2C_ADDR_QSFP_EEPROM} +} + +#Get QSFP EEPROM Information +function _i2c_qsfp_eeprom_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + #status: 0 -> Down, 1 -> Up + status=`cat ${PATH_SYS_GPIO}/gpio$(( gpioBase + (QSFP_PORT-1)%16 ))/value` + echo $status + + if [ $status = 0 ]; then + exit + fi + + _qsfp_eeprom_var_set ${QSFP_PORT} + + cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C +} + +#Init QSFP EEPROM +function _i2c_qsfp_eeprom_init { + echo -n "QSFP EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-32 ports EEPROM + local i + for i in {1..32}; + do + _qsfp_port_i2c_var_set ${i} + + _qsfp_eeprom_var_set ${i} + + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/delete_device + fi + done + echo "DONE" +} + +#Init Main Board EEPROM +function _i2c_mb_eeprom_init { + echo -n "Main Board EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init MB EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then + echo "mb_eeprom ${I2C_ADDR_MB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM) ]; then + echo "${I2C_ADDR_MB_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_MB_EEPROM}/delete_device + fi + echo "DONE" +} + +#get QSFP Status +function _i2c_qsfp_status_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + #status: 0 -> Down, 1 -> Up + + status=`cat ${PATH_SYS_GPIO}/gpio$(( gpioBase + (QSFP_PORT-1)%16 ))/value` + echo "status=$status" +} + +#get QSFP Type +function _i2c_qsfp_type_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + _qsfp_eeprom_var_set ${QSFP_PORT} + + #Get QSFP EEPROM info + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom) + + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +#Init PSU Kernel Module +function _i2c_psu_init { + echo "=========================================================" + echo "# Description: I2C PSU Init" + echo "=========================================================" + modprobe ingrasys_s8810_32q_psu + + echo "psu1 ${I2C_ADDR_PSU_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU1_EEPROM}/new_device + echo "psu2 ${I2C_ADDR_PSU_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU2_EEPROM}/new_device +} + +#Get PSU EEPROM Information +function _i2c_psu_eeprom_get { + local eeprom_psu1="" + local eeprom_psu2="" + + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Get..." + echo "=========================================================" + + eeprom_psu1="${PATH_SYSFS_PSU1}/psu_eeprom" + cat ${eeprom_psu1} | hexdump -C + + eeprom_psu2="${PATH_SYSFS_PSU2}/psu_eeprom" + cat ${eeprom_psu2} | hexdump -C +} + +#Get MotherBoard EEPROM Information +function _i2c_mb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get..." + echo "=========================================================" + + ## MB EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${I2C_BUS_MB_EEPROM}-$(printf "%04x" $I2C_ADDR_MB_EEPROM)/eeprom | hexdump -C + echo "done..." +} + +#Set FAN Tray LED +function _i2c_fan_tray_led { + local value=0 + case ${FAN_TRAY} in + 1) + ioPort=$REG_OUT_0 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 2) + ioPort=$REG_OUT_0 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + 3) + ioPort=$REG_OUT_1 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 4) + ioPort=$REG_OUT_1 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + *) + echo "Please input 1~4" + exit + ;; + esac + + if [ "${ONOFF_LED}" == "on" ]; then + value=0xFF + elif [ "${ONOFF_LED}" == "off" ]; then + value=0x00 + else + echo "Invalid Parameters ${ONOFF_LED}, Exit!!!" + _help + exit ${FALSE} + fi + i2cset -m $mask -y -r ${I2C_BUS_FAN_STATUS} ${I2C_ADDR_MUX_9535_FAN} $ioPort $value + + #echo "done..." +} + +#Set System Status LED +function _i2c_sys_led { + local green_mask=${BIT_MASK[7]} + local amber_mask=${BIT_MASK[6]} + + _i2c_set_led $green_mask $amber_mask +} + +#Set FAN LED +function _i2c_fan_led { + local green_mask=${BIT_MASK[3]} + local amber_mask=${BIT_MASK[2]} + + _i2c_set_led $green_mask $amber_mask +} + +#Set PSU1 LED +function _i2c_psu1_led { + local green_mask=${BIT_MASK[1]} + local amber_mask=${BIT_MASK[0]} + + _i2c_set_led $green_mask $amber_mask +} + +#Set PSU2 LED +function _i2c_psu2_led { + local green_mask=${BIT_MASK[5]} + local amber_mask=${BIT_MASK[4]} + + _i2c_set_led $green_mask $amber_mask +} + +#Set LEDs in LED Board +function _i2c_set_led { + local green_mask=$1 + local amber_mask=$2 + local mask=0 + local value=0 + + + if [ "${COLOR_LED}" == "green" ]; then + mask=$green_mask + elif [ "${COLOR_LED}" == "amber" ]; then + mask=$amber_mask + else + echo "Invalid Parameters ${COLOR_LED}, Exit!!!" + _help + exit ${FALSE} + fi + + # Singals are active_low + if [ "${ONOFF_LED}" == "on" ]; then + value=0x00 + elif [ "${ONOFF_LED}" == "off" ]; then + value=0xFF + else + echo "Invalid Parameters ${ONOFF_LED}, Exit!!!" + _help + exit ${FALSE} + fi + + i2cset -m $mask -y -r ${I2C_BUS_LED_BOARD} ${I2C_ADDR_MUX_9535_LED} ${REG_OUT_0} $value +} + +#Reset all system leds +function _i2c_reset_led { + i2cset -y ${I2C_BUS_LED_BOARD} ${I2C_ADDR_MUX_9535_LED} ${REG_OUT_0} 0xFF +} + +#Get Board Version and Type +function _i2c_board_type_get { + local reg_board=0x00 + local reg_ext_board=0x07 + local boardType=0 + local boardBuildRev=0 + local boardHwRev=0 + local boardId=0 + local extBoardType=0 + + boardType=`i2cget -y ${NUM_I801_DEVICE} ${I2C_ADDR_CPLD} ${reg_board}` + #Bit 0-1 + boardBuildRev=$((($boardType) & 0x03)) + #Bit 2-3 + boardHwRev=$((($boardType) >> 2 & 0x03)) + #Bit 4-7 + boardId=$((($boardType) >> 4)) + + extBoardType=`i2cget -y ${NUM_I801_DEVICE} ${I2C_ADDR_CPLD} ${reg_ext_board}` + #Bit 0-3 + extBoardType=$((($extBoardType) & 0x0F)) + + printf "BOARD_ID=0x%02x, HW Rev=%d, Build Rev=%d, Ext_BOARD_ID=0x%02x\n" $boardId $boardHwRev $boardBuildRev $extBoardType + +} + +#Get CPLD Version +function _i2c_cpld_version { + local reg_cpld_rev=0x01 + cpldRev=`i2cget -y ${NUM_I801_DEVICE} ${I2C_ADDR_CPLD} ${reg_cpld_rev}` + cpldRelease=$((($cpldRev) >> 6 & 0x01)) + cpldVersion=$((($cpldRev) & 0x3F)) + printf "CPLD is %s version(0:RD 1:Release), Revision is 0x%02x\n" $cpldRelease $cpldVersion + +} + +#Get PSU Status +function _i2c_psu_status { + local psu_abs="" + + psu1PwGood=`cat ${PATH_SYSFS_PSU1}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU1}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu1Exist=1 + else + psu1Exist=0 + fi + + psu2PwGood=`cat ${PATH_SYSFS_PSU2}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU2}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu2Exist=1 + else + psu2Exist=0 + fi + + printf "PSU1 Exist:%x PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood + printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood +} + +#Increase read socket buffer for CoPP Test +function _config_rmem { + echo "109430400" > /proc/sys/net/core/rmem_max +} + +#Main Function +function _main { + start_time_str=`date` + start_time_sec=$(date +%s) + + if [ "${EXEC_FUNC}" == "help" ]; then + _help + elif [ "${EXEC_FUNC}" == "i2c_init" ]; then + _i2c_init + elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then + _i2c_deinit + elif [ "${EXEC_FUNC}" == "i2c_temp_init" ]; then + _i2c_temp_init + elif [ "${EXEC_FUNC}" == "i2c_fan_init" ]; then + _i2c_fan_init + elif [ "${EXEC_FUNC}" == "i2c_volmon_init" ]; then + _i2c_volmon_init + elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then + _i2c_io_exp_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_init" ]; then + _i2c_gpio_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_deinit" ]; then + _i2c_gpio_deinit + elif [ "${EXEC_FUNC}" == "i2c_led_test" ]; then + _i2c_led_test + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then + _i2c_mb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then + _i2c_psu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then + _i2c_qsfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_init" ]; then + _i2c_qsfp_eeprom_init ${QSFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_init" ]; then + _i2c_mb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then + _i2c_qsfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then + _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then + _i2c_led_psu_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then + _i2c_led_fan_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then + _i2c_led_fan_tray_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_test" ]; then + _i2c_led_fan_tray_test + elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then + _i2c_sys_led + elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then + _i2c_fan_led + elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then + _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then + _i2c_psu1_led + elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then + _i2c_psu2_led + elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then + _i2c_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_cpld_version" ]; then + _i2c_cpld_version + elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then + _i2c_deinit + _i2c_init + _i2c_led_test + _i2c_psu_eeprom_get + _i2c_mb_eeprom_get + _i2c_board_type_get + _i2c_cpld_version + _i2c_psu_status + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" + + echo "done!!!" +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/qsfp_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/qsfp_monitor.sh new file mode 100755 index 000000000000..249f179216a6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/qsfp_monitor.sh @@ -0,0 +1,104 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=3 +I2C_UTILS="/usr/sbin/i2c_utils.sh" +QSFP_SI_SCRIPT="/usr/sbin/qsfp_si_cfg.sh" +QSFP_ARRAY=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0) + +#QSFP SI monitor +function _qsfp_si_monitor { + local i + local status + for i in {0..31}; + do + status=`${I2C_UTILS} i2c_qsfp_status_get $(expr $i + 1) | egrep '^status=.*$' | sed -e 's/status=//g'` + if [ "${status}" == "1" ]; then + _qsfp_type_check $i + fi + done +} + +#QSFP type +function _qsfp_type_check { + local port=$1 + local qsfp_type=`${I2C_UTILS} i2c_qsfp_type_get $(expr $port + 1)` + local identifier=`echo "$qsfp_type" | grep '^identifier=.*$' | sed -e 's/identifier=//g'` + if [ "${identifier}" == "11" ]; then + connector=`echo "$qsfp_type" | grep '^connector=.*$' | sed -e 's/connector=//g'` + case ${connector} in + 21|23) + #DAC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to DAC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} dac $port >/dev/null + fi + ;; + *) + #Optical + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to Optical" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} optical $port >/dev/null + fi + ;; + esac + fi +} + +#Docker exist check +function _docker_swss_check { + while true + do + # Check if syncd starts + result=`docker exec -i swss bash -c "echo -en \"SELECT 1\\nHLEN HIDDEN\" | redis-cli | sed -n 2p"` #TBD FIX ME + if [ "$result" == "3" ]; then + return + fi + sleep $INTERVAL + done +} + +#Docker exist check +function _qsfp_si_cfg_script_check { + + if [ -f ${QSFP_SI_SCRIPT} ] && [ -x ${QSFP_SI_SCRIPT} ]; then + echo "SI Script exists. Start monitor." + return + else + echo "SI Script not exist. Exit monitor." + exit + fi +} + +# main function +function _main { + #Check SI Script + _qsfp_si_cfg_script_check + #Check docker swss is running + _docker_swss_check + while true + do + _qsfp_si_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/s8810_32q_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/s8810_32q_monitor.sh new file mode 100755 index 000000000000..974da6d5001f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8810-32q/utils/s8810_32q_monitor.sh @@ -0,0 +1,39 @@ +#!/bin/bash +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=5 +I2C_UTILS="/usr/sbin/i2c_utils.sh" + + +# LED status monitor +function _led_monitor { + ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_psu_status_set >/dev/null + ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null +} + +# main function +function _main { + while true + do + _led_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/README.md b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/README.md new file mode 100644 index 000000000000..2042625f631c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/README.md @@ -0,0 +1,185 @@ +# Ingrasys S8900-54XC Platform Driver for SONiC + +Copyright (C) 2016 Ingrasys, Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + +## Licensing terms + +The Licensing terms of the files within this project is split 2 parts. +The Linux kernel is released under the GNU General Public License version 2. +All other code is released under the GNU General Public License version 3. +Please see the LICENSE file for copies of both licenses. + +## Contents of this package + + - service/ + > Service config files for platform initialization and monitoring + - utils/ + > Scripts useful during platform bringup and sysfs function + - conf/ + > Platform configure files. + +## Kernel modules and drivers + +The driver for interacting with Ingrasys S8900-54XC is contained in the I2C +kernel module and initialization script. The initialization script loads +the modules in the correct order. It has been built and tested against +the Linux 3.16 kernel. + +The initialization script will modprobe the needed modules, navigate to the +module's device directory in sysfs, and write configuration data to +the kernel module. + +### IGB + +This is OOB Ports on front panel for management plane. + +The IGB module must be loaded first on Ingrasys S8900-54XC platform. + +### I2C i801 + +The I2C i801 on Ingrasys S8900-54XC can be found in +`/sys/bus/i2c/devices/i2c-0/` + +This is I2C bus for Clock Gen, DIMM channel and digital potentiometers. + +The i801 module must be loaded second on Ingrasys S8900-54XC. + +### I2C iSMT + +The I2C iSMT module on S8900-54XC can be found in +`/sys/bus/i2c/devices/i2c-1/` + +This is I2C bus for CPLD, HWM, power controller and I2C Switches. + +The i801 module must be loaded third on Ingrasys S8900-54XC. + +### I2C PCA9548 +The PCA9548 module on S8900-54XC can be found in +`/sys/bus/i2c/devices/i2c-2/` , `/sys/bus/i2c/devices/i2c-3/`, +`/sys/bus/i2c/devices/i2c-4/`, `/sys/bus/i2c/devices/i2c-5/`, +`/sys/bus/i2c/devices/i2c-6/`, `/sys/bus/i2c/devices/i2c-7/`, +`/sys/bus/i2c/devices/i2c-8/`, `/sys/bus/i2c/devices/i2c-9/`. + +The pca9548 module for zQSFP module get/set functions, PSU information, +fan status and EEPROM. + +## Hardware components + +The hardware components are initialized in the init script on S8900-54XC. +The following describes manual initialization as well as interaction. +The examples below are just for Ingrasys S8900-54XC platform. + +### Hardware initialization + +When the sonic-platform-ingrasys-s8900-54xc package is installed on the S8900-54XC, +it is automatically initialized. If you want to manual initialization, the +utility command usage as follows: +``` + i2c_utils.sh i2c_init +``` + +### EEPROM + +The EEPROM is including the board SKU, model name, vendor name, serial number, +and other information can be accessed with the specific eeprom kernel module. +After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs. + +The hexdump utility can be used to decode the raw output of the EEPROM. +For example, +``` + bash# echo "mb_eeprom 0x54" > /sys/bus/i2c/devices/i2c-9/new_device + bash# cat /sys/bus/i2c/drivers/mb_eeprom/9-0054/eeprom | hexdump -C +``` + +### Front panel LEDs + +LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`. +Utility function command usage as follows: + +``` +Status LED: + i2c_utils.sh i2c_sys_led green|amber on|off + +Fan status LED: + i2c_utils.sh i2c_fan_led green|amber on|off + +PSU1 status LED: + i2c_utils.sh i2c_psu1_led green|amber on|off + +PSU2 status LED: + i2c_utils.sh i2c_psu2_led green|amber on|off + +``` +QSFP Module Port LEDs control by ASIC library. + + +### Fan speed + +Fan speed are controlled by the w83795 kernel module. +It can be found in `/sys/class/hwmon/hwmon1/device/`. +If they were compiled as modules, you will need to modprobe w83795 for +their sysfs entries to show up. Each fan has an `fan_input` file +for reading the fan speed. And `pwm1` setting fan1 to fan4, +`pwm2` setting fan5 to fan8. + +There is docker-platform-monitor container installed fancontrol package that can +automatic control platform fan speed. + + +### Temperature sensors + +Temperature sensors are controlled by the w83795 kernel +module. It can be found in `/sys/class/hwmon/hwmon1/device/`. +If they were compiled as modules, then you will need to modprobe w83795 for +their sysfs entries to show up. +`temp1_input` is front MAC temperature sensor. `temp2_input` is rear MAC +temperature sensor. + +There is docker-platform-monitor container installed lm-sensors package that can +monitor platform temperature. And `sensors` command can show each +temperature sensors status. + +### Power supplies + +Power supplies status and its EEPROM info can be used i2c utility +`/usr/sbin/i2c_utils.sh` to get. +The usage as follows: +``` +PSU EEPROM: + i2c_utils.sh i2c_psu_eeprom_get + hexdump -C psu0.rom + hexdump -C psu1.rom + +PSU Status: + i2c_utils.sh i2c_psu_status +``` + +### QSFPs +QSFP modules are managed by the pca9548 kernel driver. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +QSFP EEPROM: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + +QSFP Insert Event: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + 0 => not insert + 1 => inserted +``` + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/Makefile b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/Makefile new file mode 100644 index 000000000000..a0042543dff5 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := eeprom_mb.o +obj-m+= i2c_cpld.o diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/eeprom_mb.c b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/eeprom_mb.c new file mode 100644 index 000000000000..0886cad58eb3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/eeprom_mb.c @@ -0,0 +1,212 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57, I2C_CLIENT_END }; + + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 256 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void mb_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, ((u8)addr >> 8) & 0xFF, (u8)addr & 0xFF); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t mb_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + mb_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static struct bin_attribute mb_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = EEPROM_SIZE, + .read = mb_eeprom_read, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int mb_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x50. So decline + attaching to addresses >= 0x51 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51) { + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + return -ENODEV; + } + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int mb_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &mb_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int mb_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &mb_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id mb_eeprom_id[] = { + { "mb_eeprom", 0 }, + { } +}; + +static struct i2c_driver mb_eeprom_driver = { + .driver = { + .name = "mb_eeprom", + }, + .probe = mb_eeprom_probe, + .remove = mb_eeprom_remove, + .id_table = mb_eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = mb_eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(mb_eeprom_driver); + +MODULE_AUTHOR("Wade "); +MODULE_DESCRIPTION("Ingrasys S8900 Mother Borad EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/i2c_cpld.c b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/i2c_cpld.c new file mode 100644 index 000000000000..626c63177b50 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/i2c_cpld.c @@ -0,0 +1,448 @@ +/* + * S9100-32X I2C CPLD driver + * + * Copyright (C) 2017 Ingrasys, Inc. + * Wade He + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "i2c_cpld.h" + +#ifdef DEBUG + #define DEBUG_PRINT(fmt, args...) \ + printk(KERN_INFO "%s[%d]: " fmt "\r\n", \ + __FUNCTION__, __LINE__, ##args) +#else + #define DEBUG_PRINT(fmt, args...) +#endif + +#define I2C_READ_BYTE_DATA(ret, lock, i2c_client, reg) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_read_byte_data(i2c_client, reg); \ + mutex_unlock(lock); \ +} +#define I2C_WRITE_BYTE_DATA(ret, lock, i2c_client, reg, val) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_write_byte_data(i2c_client, reg, val); \ + mutex_unlock(lock); \ +} + +/* CPLD sysfs attributes index */ +enum i2c_cpld_sysfs_attributes { + CPLD_ACCESS_REG, + CPLD_REGISTER_VAL, + CPLD_PORT_START, + CPLD_PORTS, + CPLD_VERSION, + CPLD_ID, + CPLD_BOARD_TYPE, + CPLD_EXT_BOARD_TYPE, + CPLD_PW_GOOD, + CPLD_PW_ABS, +}; + +/* CPLD sysfs attributes hook functions */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_pw_good(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_pw_abs(struct device *dev, + struct device_attribute *da, char *buf); + +static LIST_HEAD(cpld_client_list); /* client list for cpld */ +static struct mutex list_lock; /* mutex for client list */ + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +struct cpld_data { + int index; /* CPLD index */ + struct mutex access_lock; /* mutex for cpld access */ + u8 access_reg; /* register to access */ +}; + +/* CPLD device id and data */ +static const struct i2c_device_id i2c_cpld_id[] = { + { "i2c_cpld", i2c_cpld }, + {} +}; + +/* Addresses scanned for i2c_cpld */ +static const unsigned short cpld_i2c_addr[] = { 0x33, I2C_CLIENT_END }; +/* platform sysfs object */ +extern struct kobject *s9230_64x_kobj; + + +/* define all support register access of cpld in attribute */ +static SENSOR_DEVICE_ATTR(cpld_access_register, S_IWUSR | S_IRUGO, + read_access_register, write_access_register, CPLD_ACCESS_REG); +static SENSOR_DEVICE_ATTR(cpld_register_value, S_IWUSR | S_IRUGO, + read_register_value, write_register_value, CPLD_REGISTER_VAL); +static SENSOR_DEVICE_ATTR(cpld_version, S_IRUGO, + read_cpld_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(cpld_board_type, S_IRUGO, + read_board_type, NULL, CPLD_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_ext_board_type, S_IRUGO, + read_ext_board_type, NULL, CPLD_EXT_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_pw_good, S_IRUGO, + read_pw_good, NULL, CPLD_PW_GOOD); +static SENSOR_DEVICE_ATTR(cpld_pw_abs, S_IRUGO, + read_pw_abs, NULL, CPLD_PW_ABS); + + +/* define support attributes of cpldx , total 5 */ +/* cpld 1 */ +static struct attribute *i2c_cpld_attributes[] = { + &sensor_dev_attr_cpld_access_register.dev_attr.attr, + &sensor_dev_attr_cpld_register_value.dev_attr.attr, + &sensor_dev_attr_cpld_version.dev_attr.attr, + &sensor_dev_attr_cpld_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_ext_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_pw_good.dev_attr.attr, + &sensor_dev_attr_cpld_pw_abs.dev_attr.attr, + NULL +}; + +/* cpld 1 attributes group */ +static const struct attribute_group i2c_cpld_group = { + .attrs = i2c_cpld_attributes, +}; + +/* read access register from cpld data */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + + return sprintf(buf, "0x%x\n", reg); +} + +/* write access register to cpld data */ +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + + if (kstrtou8(buf, 0, ®) < 0) + return -EINVAL; + + data->access_reg = reg; + return count; +} + +/* read the value of access register in cpld data */ +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + int reg_val; + + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + + if (reg_val < 0) + return -1; + + return sprintf(buf, "0x%x\n", reg_val); +} + +/* wrtie the value to access register in cpld data */ +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + int ret = -EIO; + u8 reg = data->access_reg; + u8 reg_val; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, client, reg, reg_val); + + return count; +} + +/* get cpdl version register value */ +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_VERSION) { + reg = CPLD_VERSION_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get board type register value */ +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_BOARD_TYPE) { + reg = CPLD_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_EXT_BOARD_TYPE) { + reg = CPLD_EXT_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_pw_good(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_PW_GOOD) { + reg = CPLD_PW_GOOD_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_pw_abs(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_PW_ABS) { + reg = CPLD_PW_ABS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* add valid cpld client to list */ +static void i2c_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = NULL; + + node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + if (!node) { + dev_info(&client->dev, + "Can't allocate cpld_client_node for index %d\n", + client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +/* remove exist cpld client in list */ +static void i2c_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + list_for_each(list_node, &cpld_client_list) { + cpld_node = list_entry(list_node, + struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + mutex_unlock(&list_lock); +} + +/* cpld drvier probe */ +static int i2c_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + struct cpld_data *data = NULL; + + data = kzalloc(sizeof(struct cpld_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* init cpld data for client */ + i2c_set_clientdata(client, data); + mutex_init(&data->access_lock); + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_info(&client->dev, + "i2c_check_functionality failed (0x%x)\n", + client->addr); + status = -EIO; + goto exit; + } + + + status = sysfs_create_group(&client->dev.kobj,&i2c_cpld_group); + + if (status) + goto exit; + + dev_info(&client->dev, "chip found\n"); + + /* add probe chip to client list */ + i2c_cpld_add_client(client); + + return 0; +exit: + sysfs_remove_group(&client->dev.kobj, &i2c_cpld_group); + return status; +} + +/* cpld drvier remove */ +static int i2c_cpld_remove(struct i2c_client *client) +{ + + sysfs_remove_group(&client->dev.kobj, &i2c_cpld_group); + + i2c_cpld_remove_client(client); + return 0; +} + +MODULE_DEVICE_TABLE(i2c, i2c_cpld_id); + +static struct i2c_driver i2c_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "i2c_cpld", + }, + .probe = i2c_cpld_probe, + .remove = i2c_cpld_remove, + .id_table = i2c_cpld_id, + .address_list = cpld_i2c_addr, +}; + +static int __init i2c_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&i2c_cpld_driver); +} + +static void __exit i2c_cpld_exit(void) +{ + i2c_del_driver(&i2c_cpld_driver); +} + +MODULE_AUTHOR("Wade He "); +MODULE_DESCRIPTION("Ingrasys S9100-32X Platform i2c cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_cpld_init); +module_exit(i2c_cpld_exit); + + + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/i2c_cpld.h b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/i2c_cpld.h new file mode 100644 index 000000000000..e103b05c717a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/modules/i2c_cpld.h @@ -0,0 +1,197 @@ +/* + * + * S9100-32X I2C CPLD driver header file + * + * Copyright (C) 2017 Ingrasys, Inc. + * Wade He + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef I2C_CPLD_H +#define I2C_CPLD_H + +// remove debug before release +#define DEBUG + +/* CPLD device index value */ +enum cpld_id { + i2c_cpld +}; + +/* port number on CPLD */ +#define CPLD_1_PORT_NUM 12 +#define CPLD_2_PORT_NUM 13 + +/* QSFP port number */ +#define QSFP_MAX_PORT_NUM 64 +#define QSFP_MIN_PORT_NUM 1 + +/* SFP+ port number */ +#define SFP_MAX_PORT_NUM 2 +#define SFP_MIN_PORT_NUM 1 + + +/* CPLD registers */ +#define CPLD_BOARD_TYPE_REG 0x0 +#define CPLD_EXT_BOARD_TYPE_REG 0x7 +#define CPLD_VERSION_REG 0x1 +#define CPLD_PW_GOOD_REG 0x2 +#define CPLD_PW_ABS_REG 0x3 + + +/* bit definition for register value */ + +enum CPLD_RESET_CONTROL_BITS { + CPLD_RESET_CONTROL_SWRST_BIT, + CPLD_RESET_CONTROL_CP2104RST_BIT, + CPLD_RESET_CONTROL_82P33814RST_BIT, + CPLD_RESET_CONTROL_BMCRST_BIT, +}; + +/* bit field structure for register value */ +struct cpld_reg_board_type_t { + u8 build_rev:2; + u8 hw_rev:2; + u8 board_id:4; +}; + +struct cpld_reg_version_t { + u8 revision:6; + u8 release:1; + u8 reserve:1; +}; + +struct cpld_reg_pw_good_t { + u8 reserve1:3; + u8 psu1:1; + u8 psu2:1; + u8 reserve2:3; +}; + +struct cpld_reg_pw_abs_t { + u8 psu1:1; + u8 psu2:1; + u8 reserve:6; +}; + +/* common manipulation */ +#define INVALID(i, min, max) ((i < min) || (i > max) ? 1u : 0u) +#define READ_BIT(val, bit) ((0u == (val & (1<bf_name) +#define READ_BF_1(bf_struct, val, bf_name, bf_value) \ + bf_struct bf; \ + bf.data = val; \ + bf_value = bf.bf_name +#define BOARD_TYPE_BUILD_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, build_rev, res) +#define BOARD_TYPE_HW_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, hw_rev, res) +#define BOARD_TYPE_BOARD_ID_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, board_id, res) +#define CPLD_VERSION_REV_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, revision, res) +#define CPLD_VERSION_REL_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, release, res) +#define CPLD_PSU1_PW_GOOD_GET(val, res) \ + READ_BF(cpld_reg_pw_good_t, val, psu1, res) +#define CPLD_PSU2_PW_GOOD_GET(val, res) \ + READ_BF(cpld_reg_pw_good_t, val, psu2, res) +#define CPLD_PSU1_PW_ABS_GET(val, res) \ + READ_BF(cpld_reg_pw_abs_t, val, psu1, res) +#define CPLD_PSU2_PW_ABS_GET(val, res) \ + READ_BF(cpld_reg_pw_abs_t, val, psu2, res) +/* QSFP/SFP registers manipulation */ +#define QSFP_TO_CPLD_IDX(qsfp_port, cpld_index, cpld_port) \ +{ \ + if (QSFP_MIN_PORT_NUM <= qsfp_port && qsfp_port <= CPLD_1_PORT_NUM) { \ + cpld_index = cpld1; \ + cpld_port = qsfp_port - 1; \ + } else if (CPLD_1_PORT_NUM < qsfp_port \ + && qsfp_port <= QSFP_MAX_PORT_NUM) { \ + cpld_index = cpld2 + (qsfp_port - 1 - CPLD_1_PORT_NUM) \ + / CPLD_2_PORT_NUM; \ + cpld_port = (qsfp_port - 1 - CPLD_1_PORT_NUM) % \ + CPLD_2_PORT_NUM; \ + } else { \ + cpld_index = 0; \ + cpld_port = 0; \ + } \ +} +#define SFP_TO_CPLD_IDX(sfp_port, cpld_index) \ + (cpld_index = sfp_port - SFP_MIN_PORT_NUM) +#define QSFP_PORT_STATUS_REG(cpld_port) \ + (CPLD_QSFP_PORT_STATUS_BASE_REG + cpld_port) +#define QSFP_PORT_CONFIG_REG(cpld_port) \ + (CPLD_QSFP_PORT_CONFIG_BASE_REG + cpld_port) +#define QSFP_PORT_INT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_INT_BIT) +#define QSFP_PORT_ABS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_ABS_BIT) +#define QSFP_PORT_RESET_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_RESET_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_RESET_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_LPMODE_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define SFP_PORT_PRESENT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_PRESENT_BIT) + + #define SFP_PORT_TXFAULT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_TXFAULT_BIT) + #define SFP_PORT_RXLOS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_RXLOS_BIT) + #define SFP_PORT_TXDIS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_RS_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_TS_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) +#define SFP_PORT_TXDIS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_TXDIS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_RS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_RS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_TS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) +#define SFP_PORT_TS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) + +/* CPLD access functions */ +extern int i2c_cpld_get_qsfp_port_status_val(u8 port_num); +extern int i2c_cpld_get_qsfp_port_config_val(u8 port_num); +extern int i2c_cpld_set_qsfp_port_config_val(u8 port_num, u8 reg_val); +extern int i2c_cpld_get_sfp_port_status_val(u8 port_num); +extern int i2c_cpld_get_sfp_port_config_val(u8 port_num); +extern int i2c_cpld_set_sfp_port_config_val(u8 port_num, u8 reg_val); +extern u8 fp_port_to_phy_port(u8 fp_port); +#endif + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/service/qsfp-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/service/qsfp-monitor.service new file mode 100644 index 000000000000..e33c2fdae122 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/service/qsfp-monitor.service @@ -0,0 +1,15 @@ +[Unit] +Description= This QSFP Monitor service is to setup QSFP SI. +Requires=s8900-54xc-monitor.service +After=s8900-54xc-monitor.service + +[Service] +ExecStart=/usr/sbin/qsfp_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/service/s8900-54xc-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/service/s8900-54xc-monitor.service new file mode 100644 index 000000000000..e43fddc9b857 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/service/s8900-54xc-monitor.service @@ -0,0 +1,18 @@ +[Unit] +Description= This Platform Monitor service is to initialize platform and monitor platform. +Before=platform-monitor.service +After=sysinit.target +Wants=fancontrol.service +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/sbin/i2c_utils.sh i2c_init +ExecStart=/usr/sbin/s8900_54xc_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/i2c_utils.sh new file mode 100644 index 000000000000..eea7b9ba8fe9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/i2c_utils.sh @@ -0,0 +1,1485 @@ +#!/bin/bash + +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 +PORT_START=1 +PORT_END=54 + +EXEC_FUNC=${1} +COLOR_LED=${2} +QSFP_PORT=${2} +ONOFF_LED=${3} +FAN_TRAY=${4} + +############################################################ +# Distributor ID: Debian +# Description: Debian GNU/Linux 8.6 (jessie) +# Release: 8.6 +# Codename: jessie +# Linux debian 3.16.0-4-amd64 #1 +# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux +############################################################ + +# Color Definition +COLOR_TITLE="\e[1;32m" ### Green ### +COLOR_WARNING="\e[1;33m" ### Yellow ### +COLOR_ERROR="\e[1;31m" ### Red ### +COLOR_END="\e[0m" ### END ### + +NUM_IGB_DEVICE=0 +NUM_I801_DEVICE=0 +NUM_ISMT_DEVICE=$(( ${NUM_I801_DEVICE} + 1 )) +NUM_MUX1_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 2 )) +NUM_MUX1_CHAN1_DEVICE=$(( ${NUM_I801_DEVICE} + 3 )) +NUM_MUX1_CHAN2_DEVICE=$(( ${NUM_I801_DEVICE} + 4 )) +NUM_MUX1_CHAN3_DEVICE=$(( ${NUM_I801_DEVICE} + 5 )) +NUM_MUX1_CHAN4_DEVICE=$(( ${NUM_I801_DEVICE} + 6 )) +NUM_MUX1_CHAN5_DEVICE=$(( ${NUM_I801_DEVICE} + 7 )) +NUM_MUX1_CHAN6_DEVICE=$(( ${NUM_I801_DEVICE} + 8 )) +NUM_MUX1_CHAN7_DEVICE=$(( ${NUM_I801_DEVICE} + 9 )) +NUM_MUX2_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 10 )) +NUM_MUX2_CHAN1_DEVICE=$(( ${NUM_I801_DEVICE} + 11 )) +NUM_MUX2_CHAN2_DEVICE=$(( ${NUM_I801_DEVICE} + 12 )) +NUM_MUX2_CHAN3_DEVICE=$(( ${NUM_I801_DEVICE} + 13 )) +NUM_MUX2_CHAN4_DEVICE=$(( ${NUM_I801_DEVICE} + 14 )) +NUM_MUX2_CHAN5_DEVICE=$(( ${NUM_I801_DEVICE} + 15 )) +NUM_MUX2_CHAN6_DEVICE=$(( ${NUM_I801_DEVICE} + 16 )) +NUM_MUX2_CHAN7_DEVICE=$(( ${NUM_I801_DEVICE} + 17 )) +NUM_MUX3_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 18 )) +NUM_MUX4_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 26 )) +NUM_MUX5_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 34 )) +NUM_MUX6_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 42 )) +NUM_MUX7_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 50 )) +NUM_MUX8_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 58 )) +NUM_MUX9_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 66 )) + +PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" +PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon1" +PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_ISMT_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_ISMT_DEVICE}" +PATH_MUX_CHAN0_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN0_DEVICE}" +PATH_MUX_CHAN1_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN1_DEVICE}" +PATH_MUX_CHAN2_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN2_DEVICE}" +PATH_MUX_CHAN3_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN3_DEVICE}" +PATH_MUX_CHAN4_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN4_DEVICE}" +PATH_MUX_CHAN5_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN5_DEVICE}" +PATH_MUX_CHAN6_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN6_DEVICE}" +PATH_MUX_CHAN7_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN7_DEVICE}" + +#SFP/QSFP EEPROM i2c bus index +SFP_EEPROM_BUS_IDX=0 + +#Power Supply Status +PSU_DC_ON=1 +PSU_DC_OFF=0 +PSU_EXIST=1 +PSU_NOT_EXIST=0 + +#GPIO Index for QSFP +ZQSFP_PORT0_15_ABS_GPIO_IDX=192 +ZQSFP_PORT16_31_ABS_GPIO_IDX=176 +ZQSFP_PORT32_47_ABS_GPIO_IDX=160 + + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} i2c_init" + echo " : ${0} i2c_deinit" + echo " : ${0} i2c_temp_init" + echo " : ${0} i2c_fan_init" + echo " : ${0} i2c_volmon_init" + echo " : ${0} i2c_io_exp_init" + echo " : ${0} i2c_gpio_init" + echo " : ${0} i2c_gpio_deinit" + echo " : ${0} i2c_led_test" + echo " : ${0} i2c_psu_eeprom_get" + echo " : ${0} i2c_mb_eeprom_get" + echo " : ${0} i2c_qsfp_eeprom_get [1-54]" + echo " : ${0} i2c_qsfp_status_get [1-54]" + echo " : ${0} i2c_qsfp_type_get [1-54]" + echo " : ${0} i2c_board_type_get" + echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_psu_status_set" + echo " : ${0} i2c_led_fan_status_set" + echo " : ${0} i2c_led_fan_tray_status_set" + echo " : ${0} i2c_cpld_version" + echo " : ${0} i2c_front_temp" + echo " : ${0} i2c_rear_temp" + echo " : ${0} i2c_test_all" + echo " : ${0} i2c_sys_led green|amber on|off" + echo " : ${0} i2c_fan_led green|amber on|off" + echo " : ${0} i2c_psu1_led green|amber on|off" + echo " : ${0} i2c_psu2_led green|amber on|off" + echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]" + echo "----------------------------------------------------" +} + +#Pause function +function _pause { + read -p "$*" +} + +#Retry command function +function _retry { + for i in {1..5}; + do + eval "${*}" && break || echo "retry"; sleep 1; + done +} + + +#I2C Init +function _i2c_init { + echo "=========================================================" + echo "# Description: I2C Init" + echo "=========================================================" + + rmmod i2c_ismt + rmmod i2c_i801 + modprobe i2c_i801 + modprobe i2c_ismt + modprobe i2c_dev + modprobe i2c_mux_pca954x force_deselect_on_exit=1 + + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x70' > ${PATH_ISMT_DEVICE}/new_device" + else + echo "pca9548 0x70 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX2_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x72' > ${PATH_ISMT_DEVICE}/new_device" + else + echo "pca9548 0x72 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX3_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN0_DEVICE}/new_device" + else + echo "pca9548 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX4_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN1_DEVICE}/new_device" + else + echo "pca9548 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX5_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN2_DEVICE}/new_device" + else + echo "pca9548 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX6_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN3_DEVICE}/new_device" + else + echo "pca9548 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX7_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN4_DEVICE}/new_device" + else + echo "pca9548 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX8_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN5_DEVICE}/new_device" + else + echo "pca9548 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX9_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN6_DEVICE}/new_device" + else + echo "pca9548 0x71 already init." + fi + + #Init CPLD LED_CLR Register (Front Port LED) + i2cset -y ${NUM_I801_DEVICE} 0x33 0x34 0x10 + + rmmod coretemp + rmmod jc42 + rmmod w83795 + _i2c_temp_init + _i2c_volmon_init + _i2c_hwmon_init + modprobe coretemp + modprobe w83795 + modprobe jc42 + modprobe sff_8436_eeprom + modprobe eeprom + modprobe eeprom_mb + _i2c_fan_init + _i2c_io_exp_init + _i2c_gpio_init + _i2c_cpld_init + _i2c_psu_eeprom_init + _i2c_led_psu_status_set + _i2c_led_fan_status_set + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + echo "Mount Main Board EEPROM" + echo "mb_eeprom 0x54" > /sys/bus/i2c/devices/i2c-17/new_device + for (( i=$PORT_START; i<=$PORT_END; i++ )) + do + _i2c_mount_sfp_eeprom $i + done + _config_rmem +} + +#I2C Deinit +function _i2c_deinit { + _i2c_gpio_deinit + for mod in coretemp jc42 w83795 eeprom_mb gpio-pca953x i2c_mux_pca954x i2c_ismt i2c_i801; + do + [ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod + done +} + +#Temperature sensor Init +function _i2c_temp_init { + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x00 0x80 + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x05 0x7F + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x04 0x0A + echo "TEMP INIT Done" +} + +#FAN Init +function _i2c_fan_init { + echo -n "FAN INIT..." + if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm1 + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm2 + echo "SUCCESS" + else + echo "FAIL" + fi + +} + +#VOLMON Init +function _i2c_volmon_init { + echo -n "VOLMON INIT..." + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x00 0x80 + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x02 0xFF + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x03 0x50 + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x04 0x0A + echo "Done" +} + +#HWMON Init +function _i2c_hwmon_init { + echo -n "HWMON INIT..." + i2cset -y ${NUM_I801_DEVICE} 0x2F 0x00 0x80 + i2cset -y ${NUM_I801_DEVICE} 0x2F 0x06 0xFF + echo "Done" +} + +#IO Expander Init +function _i2c_io_exp_init { + echo "=========================================================" + echo "# Description: I2C IO Expender Init" + echo "=========================================================" + #SMBUS0 IO_EXPENDER + i2cset -y -r ${NUM_I801_DEVICE} 0x27 4 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 5 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 6 0xFF + i2cset -y -r ${NUM_I801_DEVICE} 0x27 7 0xFF + + #SMBUS1 + #SFP+ ABS + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x22 5 0x00 + + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x20 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x20 7 0xFF + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x21 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x21 7 0xFF + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x22 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x22 7 0xFF + + #QSFP/ZQSFP ABS + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x23 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x23 6 0xFF + + #QSFP/ZQSFP INT + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x23 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN0_DEVICE} 0x23 7 0xFF + + #SFP+ RX_LOS + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x22 5 0x00 + + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x20 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x20 7 0xFF + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x21 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x21 7 0xFF + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x22 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN1_DEVICE} 0x22 7 0xFF + + #SFP+ TX_FAULT + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x22 5 0x00 + + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x20 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x20 7 0xFF + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x21 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x21 7 0xFF + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x22 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN2_DEVICE} 0x22 7 0xFF + + #SFP+ TX_RS + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x22 5 0x00 + + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x20 2 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x20 3 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x21 2 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x21 3 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x22 2 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x22 3 0xFF + + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x20 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x20 7 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x21 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x21 7 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x22 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x22 7 0xFF + + #QSFP/zQSFP LPMODE + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x23 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x23 2 0x00 + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x23 6 0x00 + + #QSFP/zQSFP MODSEL + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x23 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x23 3 0x00 + i2cset -y -r ${NUM_MUX2_CHAN3_DEVICE} 0x23 7 0x00 + + #SFP+ RX_RS + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x22 5 0x00 + + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x20 2 0xFF + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x20 3 0xFF + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x21 2 0xFF + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x21 3 0xFF + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x22 3 0xFF + + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x20 6 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x20 7 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x21 6 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x21 7 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x22 6 0x00 + i2cset -y -r ${NUM_MUX2_CHAN4_DEVICE} 0x22 7 0x00 + + #SFP+ TX_DIS + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x22 5 0x00 + + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x20 2 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x20 3 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x21 2 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x21 3 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x22 2 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x22 3 0x00 + + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x20 6 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x20 7 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x21 6 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x21 7 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x22 6 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x22 7 0x00 + + #QSFP/zQSFP RST + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x23 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x23 2 0xFF + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x23 6 0x00 + + #SFP/QSFP/zQSFP I/O + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x24 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x24 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x24 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN5_DEVICE} 0x24 7 0xFF + + #ZQSFP/SFP+/E-Card General + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x21 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x21 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x21 6 0xF4 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x21 7 0xF4 + + #LED board after PVT (S8900_IO_EXP_LED_ID) + echo "Init LED IO Expender" + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 7 0x00 + + #PSU I/O (S8900_IO_EXP_PSU_ID) + echo "Init PSU IO Expender" + i2cset -y -r ${NUM_MUX2_CHAN6_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN6_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN6_DEVICE} 0x20 2 0x00 + i2cset -y -r ${NUM_MUX2_CHAN6_DEVICE} 0x20 3 0x00 + i2cset -y -r ${NUM_MUX2_CHAN6_DEVICE} 0x20 6 0xFF + i2cset -y -r ${NUM_MUX2_CHAN6_DEVICE} 0x20 7 0xFF + + #FAN I/O (S8900_IO_EXP_FAN_ID) + echo "Init FAN IO Expender" + i2cset -y -r ${NUM_MUX2_CHAN7_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX2_CHAN7_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX2_CHAN7_DEVICE} 0x20 2 0x11 + i2cset -y -r ${NUM_MUX2_CHAN7_DEVICE} 0x20 3 0x11 + i2cset -y -r ${NUM_MUX2_CHAN7_DEVICE} 0x20 6 0xCC + i2cset -y -r ${NUM_MUX2_CHAN7_DEVICE} 0x20 7 0xCC +} + +function _get_sfp_eeprom_bus_idx { + case $1 in + 1|2|3|4|5|6|7|8) + SFP_EEPROM_BUS_IDX=$(( (${NUM_MUX3_CHAN0_DEVICE} + $1 - 1) )) + ;; + 9|10|11|12|13|14|15|16) + SFP_EEPROM_BUS_IDX=$(( (${NUM_MUX4_CHAN0_DEVICE} + $1 - 9) )) + ;; + 17|18|19|20|21|22|23|24) + SFP_EEPROM_BUS_IDX=$(( (${NUM_MUX5_CHAN0_DEVICE} + $1 - 17) )) + ;; + 25|26|27|28|29|30|31|32) + SFP_EEPROM_BUS_IDX=$(( (${NUM_MUX6_CHAN0_DEVICE} + $1 - 25) )) + ;; + 33|34|35|36|37|38|39|40) + SFP_EEPROM_BUS_IDX=$(( (${NUM_MUX7_CHAN0_DEVICE} + $1 - 33) )) + ;; + 41|42|43|44|45|46|47|48) + SFP_EEPROM_BUS_IDX=$(( (${NUM_MUX8_CHAN0_DEVICE} + $1 - 41) )) + ;; + 49|50|51|52|53|54) + SFP_EEPROM_BUS_IDX=$(( (${NUM_MUX9_CHAN0_DEVICE} + $1 - 49) )) + ;; + *) + SFP_EEPROM_BUS_IDX=-1 + ;; + esac +} + +#Mount SFP/QSFP EEPROM +function _i2c_mount_sfp_eeprom { + _get_sfp_eeprom_bus_idx $1 + eeprombus=${SFP_EEPROM_BUS_IDX} + eepromAddr=0x50 + echo "sff8436 $eepromAddr" > /sys/bus/i2c/devices/i2c-$eeprombus/new_device + echo "Mount Port $1 EEPROM" +} + +#Unmount SFP/QSFP EEPROM +function _i2c_unmount_sfp_eeprom { + _get_sfp_eeprom_bus_idx $1 + eeprombus=${SFP_EEPROM_BUS_IDX} + eepromAddr=0x50 + echo "$eepromAddr" > /sys/bus/i2c/devices/i2c-$eeprombus/new_device + echo "Unmount Port $1 EEPROM" +} + +#GPIO Init +function _i2c_gpio_init { + + #QSFP/ZQSFP ABS+INT + echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/new_device + + _retry "echo 240 > /sys/class/gpio/export" + echo 241 > /sys/class/gpio/export + echo 242 > /sys/class/gpio/export + echo 243 > /sys/class/gpio/export + echo 244 > /sys/class/gpio/export + echo 245 > /sys/class/gpio/export + echo 246 > /sys/class/gpio/export + echo 247 > /sys/class/gpio/export + echo 248 > /sys/class/gpio/export + echo 249 > /sys/class/gpio/export + echo 250 > /sys/class/gpio/export + echo 251 > /sys/class/gpio/export + echo 252 > /sys/class/gpio/export + echo 253 > /sys/class/gpio/export + echo 254 > /sys/class/gpio/export + echo 255 > /sys/class/gpio/export + + echo 1 > /sys/class/gpio/gpio241/active_low #QSFP49 ABS + echo 1 > /sys/class/gpio/gpio240/active_low #QSFP48 ABS + echo 1 > /sys/class/gpio/gpio243/active_low #QSFP51 ABS + echo 1 > /sys/class/gpio/gpio242/active_low #QSFP50 ABS + echo 1 > /sys/class/gpio/gpio245/active_low #QSFP53 ABS + echo 1 > /sys/class/gpio/gpio244/active_low #QSFP52 ABS + echo 1 > /sys/class/gpio/gpio247/active_low #NA + echo 1 > /sys/class/gpio/gpio246/active_low #NA + echo 1 > /sys/class/gpio/gpio249/active_low #QSFP49 INT + echo 1 > /sys/class/gpio/gpio248/active_low #QSFP48 INT + echo 1 > /sys/class/gpio/gpio251/active_low #QSFP51 INT + echo 1 > /sys/class/gpio/gpio250/active_low #QSFP50 INT + echo 1 > /sys/class/gpio/gpio253/active_low #QSFP53 INT + echo 1 > /sys/class/gpio/gpio252/active_low #QSFP52 INT + echo 1 > /sys/class/gpio/gpio255/active_low #NA + echo 1 > /sys/class/gpio/gpio254/active_low #NA + + #QSFP/zQSFP LPMODE+MODSEL + echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN3_DEVICE}/new_device + echo 224 > /sys/class/gpio/export #QSFP0 LPMODE + echo 225 > /sys/class/gpio/export #QSFP1 LPMODE + echo 226 > /sys/class/gpio/export #QSFP2 LPMODE + echo 227 > /sys/class/gpio/export #QSFP3 LPMODE + echo 228 > /sys/class/gpio/export #QSFP4 LPMODE + echo 229 > /sys/class/gpio/export #QSFP5 LPMODE + echo 230 > /sys/class/gpio/export #NA + echo 231 > /sys/class/gpio/export #NA + echo 232 > /sys/class/gpio/export #QSFP0 MODSEL + echo 233 > /sys/class/gpio/export #QSFP1 MODSEL + echo 234 > /sys/class/gpio/export #QSFP2 MODSEL + echo 235 > /sys/class/gpio/export #QSFP3 MODSEL + echo 236 > /sys/class/gpio/export #QSFP4 MODSEL + echo 237 > /sys/class/gpio/export #QSFP5 MODSEL + echo 238 > /sys/class/gpio/export #NA + echo 239 > /sys/class/gpio/export #NA + echo out > /sys/class/gpio/gpio224/direction + echo out > /sys/class/gpio/gpio225/direction + echo out > /sys/class/gpio/gpio226/direction + echo out > /sys/class/gpio/gpio227/direction + echo out > /sys/class/gpio/gpio228/direction + echo out > /sys/class/gpio/gpio229/direction + echo out > /sys/class/gpio/gpio230/direction + echo out > /sys/class/gpio/gpio231/direction + echo out > /sys/class/gpio/gpio232/direction + echo out > /sys/class/gpio/gpio233/direction + echo out > /sys/class/gpio/gpio234/direction + echo out > /sys/class/gpio/gpio235/direction + echo out > /sys/class/gpio/gpio236/direction + echo out > /sys/class/gpio/gpio237/direction + echo out > /sys/class/gpio/gpio238/direction + echo out > /sys/class/gpio/gpio239/direction + + #QSFP RST + echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN5_DEVICE}/new_device + echo 208 > /sys/class/gpio/export #QSFP0 RST + echo 209 > /sys/class/gpio/export #QSFP1 RST + echo 210 > /sys/class/gpio/export #QSFP2 RST + echo 211 > /sys/class/gpio/export #QSFP3 RST + echo 212 > /sys/class/gpio/export #QSFP4 RST + echo 213 > /sys/class/gpio/export #QSFP5 RST + echo 214 > /sys/class/gpio/export #NA + echo 215 > /sys/class/gpio/export #NA + echo 216 > /sys/class/gpio/export #NA + echo 217 > /sys/class/gpio/export #NA + echo 218 > /sys/class/gpio/export #NA + echo 219 > /sys/class/gpio/export #NA + echo 220 > /sys/class/gpio/export #NA + echo 221 > /sys/class/gpio/export #NA + echo 222 > /sys/class/gpio/export #NA + echo 223 > /sys/class/gpio/export #NA + echo out > /sys/class/gpio/gpio208/direction + echo out > /sys/class/gpio/gpio209/direction + echo out > /sys/class/gpio/gpio210/direction + echo out > /sys/class/gpio/gpio211/direction + echo out > /sys/class/gpio/gpio212/direction + echo out > /sys/class/gpio/gpio213/direction + echo 1 > /sys/class/gpio/gpio208/active_low + echo 1 > /sys/class/gpio/gpio209/active_low + echo 1 > /sys/class/gpio/gpio210/active_low + echo 1 > /sys/class/gpio/gpio211/active_low + echo 1 > /sys/class/gpio/gpio212/active_low + echo 1 > /sys/class/gpio/gpio213/active_low + echo 0 > /sys/class/gpio/gpio208/value + echo 0 > /sys/class/gpio/gpio209/value + echo 0 > /sys/class/gpio/gpio210/value + echo 0 > /sys/class/gpio/gpio211/value + echo 0 > /sys/class/gpio/gpio212/value + echo 0 > /sys/class/gpio/gpio213/value + + #SFP+ ABS 0-15 + echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/new_device + echo 192 > /sys/class/gpio/export + echo 193 > /sys/class/gpio/export + echo 194 > /sys/class/gpio/export + echo 195 > /sys/class/gpio/export + echo 196 > /sys/class/gpio/export + echo 197 > /sys/class/gpio/export + echo 198 > /sys/class/gpio/export + echo 199 > /sys/class/gpio/export + echo 200 > /sys/class/gpio/export + echo 201 > /sys/class/gpio/export + echo 202 > /sys/class/gpio/export + echo 203 > /sys/class/gpio/export + echo 204 > /sys/class/gpio/export + echo 205 > /sys/class/gpio/export + echo 206 > /sys/class/gpio/export + echo 207 > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio192/active_low #SFP+00 + echo 1 > /sys/class/gpio/gpio193/active_low #SFP+01 + echo 1 > /sys/class/gpio/gpio194/active_low #SFP+02 + echo 1 > /sys/class/gpio/gpio195/active_low #SFP+03 + echo 1 > /sys/class/gpio/gpio196/active_low #SFP+04 + echo 1 > /sys/class/gpio/gpio197/active_low #SFP+05 + echo 1 > /sys/class/gpio/gpio198/active_low #SFP+06 + echo 1 > /sys/class/gpio/gpio199/active_low #SFP+07 + echo 1 > /sys/class/gpio/gpio200/active_low #SFP+08 + echo 1 > /sys/class/gpio/gpio201/active_low #SFP+09 + echo 1 > /sys/class/gpio/gpio202/active_low #SFP+10 + echo 1 > /sys/class/gpio/gpio203/active_low #SFP+11 + echo 1 > /sys/class/gpio/gpio204/active_low #SFP+12 + echo 1 > /sys/class/gpio/gpio205/active_low #SFP+13 + echo 1 > /sys/class/gpio/gpio206/active_low #SFP+14 + echo 1 > /sys/class/gpio/gpio207/active_low #SFP+15 + + #SFP+ ABS 16-31 + echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/new_device + echo 176 > /sys/class/gpio/export + echo 177 > /sys/class/gpio/export + echo 178 > /sys/class/gpio/export + echo 179 > /sys/class/gpio/export + echo 180 > /sys/class/gpio/export + echo 181 > /sys/class/gpio/export + echo 182 > /sys/class/gpio/export + echo 183 > /sys/class/gpio/export + echo 184 > /sys/class/gpio/export + echo 185 > /sys/class/gpio/export + echo 186 > /sys/class/gpio/export + echo 187 > /sys/class/gpio/export + echo 188 > /sys/class/gpio/export + echo 189 > /sys/class/gpio/export + echo 190 > /sys/class/gpio/export + echo 191 > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio176/active_low #SFP+16 + echo 1 > /sys/class/gpio/gpio177/active_low #SFP+17 + echo 1 > /sys/class/gpio/gpio178/active_low #SFP+18 + echo 1 > /sys/class/gpio/gpio179/active_low #SFP+19 + echo 1 > /sys/class/gpio/gpio180/active_low #SFP+20 + echo 1 > /sys/class/gpio/gpio181/active_low #SFP+21 + echo 1 > /sys/class/gpio/gpio182/active_low #SFP+22 + echo 1 > /sys/class/gpio/gpio183/active_low #SFP+23 + echo 1 > /sys/class/gpio/gpio184/active_low #SFP+24 + echo 1 > /sys/class/gpio/gpio185/active_low #SFP+25 + echo 1 > /sys/class/gpio/gpio186/active_low #SFP+26 + echo 1 > /sys/class/gpio/gpio187/active_low #SFP+27 + echo 1 > /sys/class/gpio/gpio188/active_low #SFP+28 + echo 1 > /sys/class/gpio/gpio189/active_low #SFP+29 + echo 1 > /sys/class/gpio/gpio190/active_low #SFP+30 + echo 1 > /sys/class/gpio/gpio191/active_low #SFP+31 + + #SFP+ ABS 32-47 + echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/new_device + echo 160 > /sys/class/gpio/export + echo 161 > /sys/class/gpio/export + echo 162 > /sys/class/gpio/export + echo 163 > /sys/class/gpio/export + echo 164 > /sys/class/gpio/export + echo 165 > /sys/class/gpio/export + echo 166 > /sys/class/gpio/export + echo 167 > /sys/class/gpio/export + echo 168 > /sys/class/gpio/export + echo 169 > /sys/class/gpio/export + echo 170 > /sys/class/gpio/export + echo 171 > /sys/class/gpio/export + echo 172 > /sys/class/gpio/export + echo 173 > /sys/class/gpio/export + echo 174 > /sys/class/gpio/export + echo 175 > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio160/active_low #SFP+32 + echo 1 > /sys/class/gpio/gpio161/active_low #SFP+33 + echo 1 > /sys/class/gpio/gpio162/active_low #SFP+34 + echo 1 > /sys/class/gpio/gpio163/active_low #SFP+35 + echo 1 > /sys/class/gpio/gpio164/active_low #SFP+36 + echo 1 > /sys/class/gpio/gpio165/active_low #SFP+37 + echo 1 > /sys/class/gpio/gpio166/active_low #SFP+38 + echo 1 > /sys/class/gpio/gpio167/active_low #SFP+39 + echo 1 > /sys/class/gpio/gpio168/active_low #SFP+40 + echo 1 > /sys/class/gpio/gpio169/active_low #SFP+41 + echo 1 > /sys/class/gpio/gpio170/active_low #SFP+42 + echo 1 > /sys/class/gpio/gpio171/active_low #SFP+43 + echo 1 > /sys/class/gpio/gpio172/active_low #SFP+44 + echo 1 > /sys/class/gpio/gpio173/active_low #SFP+45 + echo 1 > /sys/class/gpio/gpio174/active_low #SFP+46 + echo 1 > /sys/class/gpio/gpio175/active_low #SFP+47 + +} + +#GPIO DeInit +function _i2c_gpio_deinit { + echo "0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/delete_device + echo "0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN3_DEVICE}/delete_device + echo "0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN5_DEVICE}/delete_device + echo "0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/delete_device + echo "0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/delete_device + echo "0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX2_CHAN0_DEVICE}/delete_device +} + +#I2C CPLD init +function _i2c_cpld_init { + echo "=========================================================" + echo "# Description: I2C CPLD Init..." + echo "=========================================================" + + ## modprobe i2c_cpld + modprobe i2c_cpld + ## Add CPLD device + echo "i2c_cpld 0x33" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}/new_device + + echo "done..." +} + +#Set FAN Tray LED +function _i2c_led_fan_tray_status_set { + echo "FAN Tray Status Setup" + #FAN Status get + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ]; then + FAN_TRAY=1 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=1 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ]; then + FAN_TRAY=2 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=2 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ]; then + FAN_TRAY=3 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=3 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + FAN_TRAY=4 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=4 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi +} + +#Set FAN LED +function _i2c_led_fan_status_set { + echo "FAN Status Setup" + #PSU Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ] \ + && [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ] \ + && [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ] \ + && [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + fi +} + +#Set Power Supply LED +function _i2c_led_psu_status_set { + echo "PSU LED Status Setup" + + #PSU Status set + _i2c_psu_status + + #PSU1 Status + if [ "${psu1Exist}" == ${PSU_EXIST} ]; then + if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + + #PSU2 Status + if [ "${psu2Exist}" == ${PSU_EXIST} ]; then + if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi +} + +#LED Test +function _i2c_led_test { + echo "=========================================================" + echo "# Description: I2C LED TEST..." + echo "=========================================================" + #sys led (green) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x7F + _pause 'Check SYS LED green light and Press [Enter] key to continue...' + #sys led (amber) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xBF + _pause 'Check SYS LED amber light and Press [Enter] key to continue...' + + #FAN led (green) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xF7 + _pause 'Check FAN LED green light and Press [Enter] key to continue...' + #FAN led (amber) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFB + _pause 'Check FAN LED amber light and Press [Enter] key to continue...' + + #PSU2 led (green) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xDF + _pause 'Check PSU2 LED green light and Press [Enter] key to continue...' + #PSU2 led (amber) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xEF + _pause 'Check PSU2 LED amber light and Press [Enter] key to continue...' + + #PSU1 led (green) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFD + _pause 'Check PSU1 LED green light and Press [Enter] key to continue...' + #PSU1 led (amber) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFE + _pause 'Check PSU1 LED amber light and Press [Enter] key to continue...' + + #Turn OFF All LED + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + _pause 'Check turn off all LEDs and Press [Enter] key to continue...' + echo "done..." +} + +#Set QSFP Port variable +function _qsfp_port_i2c_var_set { + local port=$1 + case ${port} in + 1|2|3|4|5|6|7|8) + i2cbus=${NUM_MUX2_CHAN0_DEVICE} + regAddr=0x20 + dataAddr=0 + gpioBase=${ZQSFP_PORT0_15_ABS_GPIO_IDX} + ;; + 9|10|11|12|13|14|15|16) + i2cbus=${NUM_MUX2_CHAN0_DEVICE} + regAddr=0x20 + dataAddr=1 + gpioBase=${ZQSFP_PORT0_15_ABS_GPIO_IDX} + ;; + 17|18|19|20|21|22|23|24) + i2cbus=${NUM_MUX2_CHAN0_DEVICE} + regAddr=0x21 + dataAddr=0 + gpioBase=${ZQSFP_PORT16_31_ABS_GPIO_IDX} + ;; + 25|26|27|28|29|30|31|32) + i2cbus=${NUM_MUX2_CHAN0_DEVICE} + regAddr=0x21 + dataAddr=1 + gpioBase=${ZQSFP_PORT16_31_ABS_GPIO_IDX} + ;; + 33|34|35|36|37|38|39|40) + i2cbus=${NUM_MUX2_CHAN0_DEVICE} + regAddr=0x22 + dataAddr=0 + gpioBase=${ZQSFP_PORT32_47_ABS_GPIO_IDX} + ;; + 41|42|43|44|45|46|47|48) + i2cbus=${NUM_MUX2_CHAN0_DEVICE} + regAddr=0x22 + dataAddr=1 + gpioBase=${ZQSFP_PORT32_47_ABS_GPIO_IDX} + ;; + 49|50|51|52|53|54) + i2cbus=${NUM_MUX2_CHAN0_DEVICE} + regAddr=0x23 + dataAddr=0 + gpioBase=$((240 - 48)) + ;; + *) + echo "Please input 1~54" + exit ${FALSE} + ;; + esac +} + +#Get QSFP present +function _i2c_qsfp_status_get { + local status + _qsfp_port_i2c_var_set ${QSFP_PORT} + if [ ${QSFP_PORT} -lt 49 ] && [ ${QSFP_PORT} -gt 0 ]; then + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1) % 16 )) ))/value` + elif [ ${QSFP_PORT} -ge 49 ] && [ ${QSFP_PORT} -le 54 ]; then + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1))) ))/value` + fi + + echo "status=$status" +} + +#Get QSFP type +function _i2c_qsfp_type_get { + _get_sfp_eeprom_bus_idx ${QSFP_PORT} + eeprombus=${SFP_EEPROM_BUS_IDX} + eepromAddr=0x50 + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom) + + if [ ${QSFP_PORT} -ge 1 ] && [ ${QSFP_PORT} -le 48 ]; then + echo "sfp" + # 1~48 port is sfp port + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 0 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 2 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 3 -n 1 -e '"%x"') + else + echo "qsfp" + # 49~54 port is qsfp port + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + fi + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +#Get QSFP EEPROM Information +function _i2c_qsfp_eeprom_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + if [ ${QSFP_PORT} -lt 49 ] && [ ${QSFP_PORT} -gt 0 ]; then + + #status: 0 -> Down, 1 -> Up + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1) % 16 )) ))/value` + echo $status + + if [ $status = 0 ]; then + exit + fi + + _get_sfp_eeprom_bus_idx ${QSFP_PORT} + eeprombus=${SFP_EEPROM_BUS_IDX} + eepromAddr=0x50 + cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C + elif [ ${QSFP_PORT} -ge 49 ] && [ ${QSFP_PORT} -le 54 ]; then + #status: 0 -> Down, 1 -> Up + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1))) ))/value` + echo $status + + if [ $status = 0 ]; then + exit + fi + _get_sfp_eeprom_bus_idx ${QSFP_PORT} + eeprombus=${SFP_EEPROM_BUS_IDX} + eepromAddr=0x50 + cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi +} + +#PSU EEPROM init +function _i2c_psu_eeprom_init { + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Init..." + echo "=========================================================" + + ## modprobe eeprom + modprobe eeprom + ## PUS(0) EEPROM + echo "eeprom 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX2_CHAN6_DEVICE}/new_device + + ## PUS(1) EEPROM + echo "eeprom 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX2_CHAN7_DEVICE}/new_device + + echo "done..." +} + +#Get PSU EEPROM Information +function _i2c_psu_eeprom_get { + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Get..." + echo "=========================================================" + + ## modprobe eeprom + modprobe eeprom + ## PUS(0) EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_MUX2_CHAN6_DEVICE}-0050/eeprom | hexdump -C + + ## PUS(1) EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_MUX2_CHAN7_DEVICE}-0050/eeprom | hexdump -C + + echo "done..." +} + +#Get MotherBoard EEPROM Information +function _i2c_mb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get..." + echo "=========================================================" + + ## modprobe eeprom + modprobe eeprom_mb + + ## MB EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_MUX2_CHAN7_DEVICE}-0054/eeprom | hexdump -C + echo "done..." +} + +#Set System Status LED +function _i2c_sys_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x80 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x80 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x40 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x40 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set PSU2 LED +function _i2c_psu2_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x20 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x20 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x10 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x10 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set FAN Tray LED +function _i2c_fan_tray_led { + case ${FAN_TRAY} in + 1) + i2cAddr=0x20 + ioPort=2 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 2) + i2cAddr=0x20 + ioPort=2 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + 3) + i2cAddr=0x20 + ioPort=3 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 4) + i2cAddr=0x20 + ioPort=3 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + *) + echo "Please input 1~4" + exit + ;; + esac + + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m $mask -y -r ${NUM_MUX2_CHAN7_DEVICE} $i2cAddr $ioPort 0x33 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_MUX2_CHAN7_DEVICE} $i2cAddr $ioPort 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m $mask -y -r ${NUM_MUX2_CHAN7_DEVICE} $i2cAddr $ioPort 0x33 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_MUX2_CHAN7_DEVICE} $i2cAddr $ioPort 0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set FAN LED +function _i2c_fan_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x08 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x08 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x04 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x04 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set PSU1 LED +function _i2c_psu1_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x02 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x02 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x01 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x01 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Get Board Version and Type +function _i2c_board_type_get { + boardType=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_board_type` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "BOARD_ID is 0x%02x, HW Rev %d, Build Rev %d\n" $boardId $boardHwRev $boardBuildRev + +} + +#Get CPLD Version +function _i2c_cpld_version { + cpldRev=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_version` + cpldRelease=$((($cpldRev) >> 6 & 0x01)) + cpldVersion=$((($cpldRev) & 0x3F)) + printf "CPLD is %s version(0:RD 1:Release), Revision is 0x%02x\n" $cpldRelease $cpldVersion + +} + +#Get PSU Status +function _i2c_psu_status { + psuPresent=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_pw_abs` + psu1Exist=$(($((($psuPresent) & 0x01))?0:1)) + psu2Exist=$(($((($psuPresent) & 0x02))?0:1)) + psuPwGood=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_pw_good` + psu1PwGood=$(($((($psuPwGood) >> 3 & 0x01))?1:0)) + psu2PwGood=$(($((($psuPwGood) >> 3 & 0x02))?1:0)) + printf "PSU1 Exist:%d PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood + printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood +} + +#Get Front Sensor Temperature +function _i2c_front_temp { + #Front MAC + sensors | grep 'Front MAC Temp' -A 1 +} + +#Get Rear Sensor Temperature +function _i2c_rear_temp { + #Rear MAC + sensors | grep 'Rear MAC Temp' -A 1 +} + +#Increase read socket buffer for CoPP Test +function _config_rmem { + echo "109430400" > /proc/sys/net/core/rmem_max +} + +#Main Function +function _main { + tart_time_str=`date` + start_time_sec=$(date +%s) + + if [ "${EXEC_FUNC}" == "help" ]; then + _help + elif [ "${EXEC_FUNC}" == "i2c_init" ]; then + _i2c_init + elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then + _i2c_deinit + elif [ "${EXEC_FUNC}" == "i2c_temp_init" ]; then + _i2c_temp_init + elif [ "${EXEC_FUNC}" == "i2c_fan_init" ]; then + _i2c_fan_init + elif [ "${EXEC_FUNC}" == "i2c_volmon_init" ]; then + _i2c_volmon_init + elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then + _i2c_io_exp_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_init" ]; then + _i2c_gpio_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_deinit" ]; then + _i2c_gpio_deinit + elif [ "${EXEC_FUNC}" == "i2c_led_test" ]; then + _i2c_led_test + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then + _i2c_mb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then + _i2c_psu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then + _i2c_qsfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then + _i2c_qsfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then + _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then + _i2c_led_psu_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then + _i2c_led_fan_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then + _i2c_led_fan_tray_status_set + elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then + _i2c_sys_led + elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then + _i2c_fan_led + elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then + _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then + _i2c_psu1_led + elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then + _i2c_psu2_led + elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then + _i2c_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_cpld_version" ]; then + _i2c_cpld_version + elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_front_temp" ]; then + _i2c_front_temp + elif [ "${EXEC_FUNC}" == "i2c_rear_temp" ]; then + _i2c_rear_temp + elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then + _i2c_init + _i2c_temp_init + _i2c_fan_init + _i2c_io_exp_init + _i2c_led_test + _i2c_psu_eeprom_get + _i2c_mb_eeprom_get + _i2c_board_type_get + _i2c_cpld_version + _i2c_psu_status + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" + + echo "done!!!" +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/qsfp_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/qsfp_monitor.sh new file mode 100644 index 000000000000..7f50d137bcb7 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/qsfp_monitor.sh @@ -0,0 +1,106 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=3 +I2C_UTILS="/usr/sbin/i2c_utils.sh" +QSFP_SI_SCRIPT="/usr/sbin/qsfp_si_cfg.sh" +QSFP_ARRAY=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ) + +#QSFP SI monitor +function _qsfp_si_monitor { + local i + local status + for i in {0..53}; + do + status=`${I2C_UTILS} i2c_qsfp_status_get $(expr $i + 1) | egrep '^status=.*$' | sed -e 's/status=//g'` + if [ "${status}" == "1" ]; then + _qsfp_type_check $i + fi + done +} + +#QSFP type +function _qsfp_type_check { + local port=$1 + local qsfp_type=`${I2C_UTILS} i2c_qsfp_type_get $(expr $port + 1)` + local identifier=`echo "$qsfp_type" | grep '^identifier=.*$' | sed -e 's/identifier=//g'` + # identifier 11 for qsfp, 3 for sfp + if [ "${identifier}" == "11" ] || [ "${identifier}" == "3" ]; then + connector=`echo "$qsfp_type" | grep '^connector=.*$' | sed -e 's/connector=//g'` + case ${connector} in + 21|23) + #DAC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to DAC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} dac $port >/dev/null + fi + ;; + *) + #AOC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to AOC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} aoc $port >/dev/null + fi + ;; + esac + fi +} + +#Docker exist check +function _docker_swss_check { + while true + do + # Check if syncd starts + result=`docker exec -i swss bash -c "echo -en \"SELECT 1\\nHLEN HIDDEN\" | redis-cli | sed -n 2p"` #TBD FIX ME + if [ "$result" == "3" ]; then + return + fi + sleep $INTERVAL + done +} + +#Docker exist check +function _qsfp_si_cfg_script_check { + + if [ -f ${QSFP_SI_SCRIPT} ] && [ -x ${QSFP_SI_SCRIPT} ]; then + echo "SI Script exists. Start monitor." + return + else + echo "SI Script not exist. Exit monitor." + exit + fi +} + +# main function +function _main { + #Check SI Script + _qsfp_si_cfg_script_check + #Check docker swss is running + _docker_swss_check + while true + do + _qsfp_si_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/qsfp_si_cfg.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/qsfp_si_cfg.sh new file mode 100644 index 000000000000..6ded3e522bce --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/qsfp_si_cfg.sh @@ -0,0 +1,331 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +TYPE=${1} +PORT=${2} + +# port number +MIN_PORT=0 +MAX_PORT=53 + +# INDEX of value field in array +SI_PRE_IDX=1 +SI_POST_IDX=2 +SI_MAIN_IDX=3 +SI_AMP_IDX=4 +SI_DRI_IDX=5 + +# type string +AOC_TYPE="aoc" +DAC_TYPE="dac" + +# si value for bcm command +SI_VAL="" + +# "PRE POST MAIN AMP DRIVERMODE" for each port in array +# TODO: need to change aoc si value when available +xe_aoc_si_value=( + "0x00 0x3e 0x32 0xf 0x0" #port 0 + "0x00 0x3a 0x36 0xf 0x0" #port 1 + "0x00 0x3a 0x36 0xf 0x0" #port 2 + "0x00 0x38 0x38 0xf 0x0" #port 3 + "0x00 0x37 0x39 0xf 0x0" #port 4 + "0x00 0x2e 0x42 0xf 0x0" #port 5 + "0x00 0x33 0x3d 0xf 0x0" #port 6 + "0x00 0x30 0x40 0xc 0x0" #port 7 + "0x00 0x2f 0x43 0xe 0x0" #port 8 + "0x00 0x2d 0x43 0xc 0x0" #port 9 + "0x00 0x2c 0x44 0xc 0x0" #port 10 + "0x00 0x2d 0x43 0xc 0x0" #port 11 + "0x00 0x29 0x47 0xc 0x0" #port 12 + "0x00 0x28 0x48 0xc 0x0" #port 13 + "0x00 0x29 0x47 0xa 0x0" #port 14 + "0x00 0x29 0x47 0xf 0x0" #port 15 + "0x00 0x18 0x58 0x9 0x0" #port 16 + "0x00 0x1d 0x53 0x9 0x0" #port 17 + "0x00 0x1c 0x54 0x9 0x0" #port 18 + "0x00 0x1c 0x54 0x9 0x0" #port 19 + "0x00 0x1c 0x54 0x9 0x0" #port 20 + "0x00 0x1c 0x54 0x9 0x0" #port 21 + "0x00 0x1c 0x54 0x9 0x0" #port 22 + "0x00 0x1c 0x54 0x9 0x0" #port 23 + "0x00 0x1c 0x54 0x8 0x0" #port 24 + "0x00 0x1c 0x54 0x8 0x0" #port 25 + "0x00 0x18 0x58 0x8 0x0" #port 26 + "0x00 0x18 0x58 0x8 0x0" #port 27 + "0x00 0x14 0x5c 0x8 0x0" #port 28 + "0x00 0x19 0x57 0x8 0x0" #port 29 + "0x00 0x19 0x57 0x8 0x0" #port 30 + "0x00 0x19 0x57 0x8 0x0" #port 31 + "0x00 0x19 0x57 0xc 0x0" #port 32 + "0x00 0x20 0x50 0x9 0x0" #port 33 + "0x00 0x21 0x4f 0xc 0x0" #port 34 + "0x00 0x24 0x4c 0xc 0x0" #port 35 + "0x00 0x24 0x4c 0xc 0x0" #port 36 + "0x00 0x24 0x4c 0xc 0x0" #port 37 + "0x00 0x24 0x4c 0xc 0x0" #port 38 + "0x00 0x24 0x4c 0xc 0x0" #port 39 + "0x00 0x28 0x48 0xd 0x0" #port 40 + "0x00 0x28 0x48 0xc 0x0" #port 41 + "0x00 0x29 0x47 0xe 0x0" #port 42 + "0x00 0x29 0x47 0xe 0x0" #port 43 + "0x00 0x29 0x47 0xe 0x0" #port 44 + "0x00 0x28 0x48 0xf 0x0" #port 45 + "0x00 0x28 0x48 0xf 0x0" #port 46 + "0x00 0x30 0x40 0xf 0x0" #port 47 +) + +# TODO: need to change aoc si value when available +ce_aoc_si_value=( + "0x00 0x28 0x48 0xc 0x0" #port 0 lane 0 + "0x00 0x29 0x41 0xc 0x0" #port 0 lane 1 + "0x00 0x29 0x41 0xf 0x0" #port 0 lane 2 + "0x00 0x29 0x41 0xc 0x0" #port 0 lane 3 + "0x00 0x28 0x42 0xc 0x0" #port 1 lane 0 + "0x00 0x3a 0x36 0xf 0x0" #port 1 lane 1 + "0x00 0x2c 0x44 0xc 0x0" #port 1 lane 2 + "0x00 0x2c 0x44 0xc 0x0" #port 1 lane 3 + "0x00 0x2f 0x41 0xc 0x0" #port 2 lane 0 + "0x00 0x38 0x38 0xc 0x0" #port 2 lane 1 + "0x00 0x2f 0x41 0xc 0x0" #port 2 lane 2 + "0x00 0x30 0x40 0xc 0x0" #port 2 lane 3 + "0x00 0x30 0x40 0xc 0x0" #port 3 lane 0 + "0x00 0x3f 0x31 0xf 0x0" #port 3 lane 1 + "0x00 0x31 0x3f 0xc 0x0" #port 3 lane 2 + "0x00 0x30 0x40 0xa 0x0" #port 3 lane 3 + "0x00 0x30 0x40 0xc 0x0" #port 4 lane 0 + "0x00 0x31 0x3f 0xf 0x0" #port 4 lane 1 + "0x00 0x2f 0x41 0xc 0x0" #port 4 lane 2 + "0x00 0x2e 0x42 0xc 0x0" #port 4 lane 3 + "0x00 0x30 0x40 0xe 0x0" #port 5 lane 0 + "0x00 0x3f 0x31 0xf 0x0" #port 5 lane 1 + "0x00 0x38 0x38 0xf 0x0" #port 5 lane 2 + "0x00 0x3f 0x31 0xf 0x0" #port 5 lane 3 +) + +xe_dac_si_value=( + "0x00 0x3e 0x32 0xf 0x0" #port 0 + "0x00 0x3a 0x36 0xf 0x0" #port 1 + "0x00 0x3a 0x36 0xf 0x0" #port 2 + "0x00 0x38 0x38 0xf 0x0" #port 3 + "0x00 0x37 0x39 0xf 0x0" #port 4 + "0x00 0x2e 0x42 0xf 0x0" #port 5 + "0x00 0x33 0x3d 0xf 0x0" #port 6 + "0x00 0x30 0x40 0xc 0x0" #port 7 + "0x00 0x2f 0x43 0xe 0x0" #port 8 + "0x00 0x2d 0x43 0xc 0x0" #port 9 + "0x00 0x2c 0x44 0xc 0x0" #port 10 + "0x00 0x2d 0x43 0xc 0x0" #port 11 + "0x00 0x29 0x47 0xc 0x0" #port 12 + "0x00 0x28 0x48 0xc 0x0" #port 13 + "0x00 0x29 0x47 0xa 0x0" #port 14 + "0x00 0x29 0x47 0xf 0x0" #port 15 + "0x00 0x18 0x58 0x9 0x0" #port 16 + "0x00 0x1d 0x53 0x9 0x0" #port 17 + "0x00 0x1c 0x54 0x9 0x0" #port 18 + "0x00 0x1c 0x54 0x9 0x0" #port 19 + "0x00 0x1c 0x54 0x9 0x0" #port 20 + "0x00 0x1c 0x54 0x9 0x0" #port 21 + "0x00 0x1c 0x54 0x9 0x0" #port 22 + "0x00 0x1c 0x54 0x9 0x0" #port 23 + "0x00 0x1c 0x54 0x8 0x0" #port 24 + "0x00 0x1c 0x54 0x8 0x0" #port 25 + "0x00 0x18 0x58 0x8 0x0" #port 26 + "0x00 0x18 0x58 0x8 0x0" #port 27 + "0x00 0x14 0x5c 0x8 0x0" #port 28 + "0x00 0x19 0x57 0x8 0x0" #port 29 + "0x00 0x19 0x57 0x8 0x0" #port 30 + "0x00 0x19 0x57 0x8 0x0" #port 31 + "0x00 0x19 0x57 0xc 0x0" #port 32 + "0x00 0x20 0x50 0x9 0x0" #port 33 + "0x00 0x21 0x4f 0xc 0x0" #port 34 + "0x00 0x24 0x4c 0xc 0x0" #port 35 + "0x00 0x24 0x4c 0xc 0x0" #port 36 + "0x00 0x24 0x4c 0xc 0x0" #port 37 + "0x00 0x24 0x4c 0xc 0x0" #port 38 + "0x00 0x24 0x4c 0xc 0x0" #port 39 + "0x00 0x28 0x48 0xd 0x0" #port 40 + "0x00 0x28 0x48 0xc 0x0" #port 41 + "0x00 0x29 0x47 0xe 0x0" #port 42 + "0x00 0x29 0x47 0xe 0x0" #port 43 + "0x00 0x29 0x47 0xe 0x0" #port 44 + "0x00 0x28 0x48 0xf 0x0" #port 45 + "0x00 0x28 0x48 0xf 0x0" #port 46 + "0x00 0x30 0x40 0xf 0x0" #port 47 +) + +ce_dac_si_value=( + "0x00 0x28 0x48 0xc 0x0" #port 0 lane 0 + "0x00 0x29 0x41 0xc 0x0" #port 0 lane 1 + "0x00 0x29 0x41 0xf 0x0" #port 0 lane 2 + "0x00 0x29 0x41 0xc 0x0" #port 0 lane 3 + "0x00 0x28 0x42 0xc 0x0" #port 1 lane 0 + "0x00 0x3a 0x36 0xf 0x0" #port 1 lane 1 + "0x00 0x2c 0x44 0xc 0x0" #port 1 lane 2 + "0x00 0x2c 0x44 0xc 0x0" #port 1 lane 3 + "0x00 0x2f 0x41 0xc 0x0" #port 2 lane 0 + "0x00 0x38 0x38 0xc 0x0" #port 2 lane 1 + "0x00 0x2f 0x41 0xc 0x0" #port 2 lane 2 + "0x00 0x30 0x40 0xc 0x0" #port 2 lane 3 + "0x00 0x30 0x40 0xc 0x0" #port 3 lane 0 + "0x00 0x3f 0x31 0xf 0x0" #port 3 lane 1 + "0x00 0x31 0x3f 0xc 0x0" #port 3 lane 2 + "0x00 0x30 0x40 0xa 0x0" #port 3 lane 3 + "0x00 0x30 0x40 0xc 0x0" #port 4 lane 0 + "0x00 0x31 0x3f 0xf 0x0" #port 4 lane 1 + "0x00 0x2f 0x41 0xc 0x0" #port 4 lane 2 + "0x00 0x2e 0x42 0xc 0x0" #port 4 lane 3 + "0x00 0x30 0x40 0xe 0x0" #port 5 lane 0 + "0x00 0x3f 0x31 0xf 0x0" #port 5 lane 1 + "0x00 0x38 0x38 0xf 0x0" #port 5 lane 2 + "0x00 0x3f 0x31 0xf 0x0" #port 5 lane 3 +) + +#get field value in si value array for xe port +function get_xe_si { + local port=$1 + local field=$2 + local type=$3 + local index=$port + if [ "$type" == "${AOC_TYPE}" ]; then + SI_VAL=$(echo "${xe_aoc_si_value[$index]}" | awk '{print $'$field'}') + else + SI_VAL=$(echo "${xe_dac_si_value[$index]}" | awk '{print $'$field'}') + fi +} + +#get field value in si value array for ce port +function get_ce_si { + local port=$1 + local lane=$2 + local field=$3 + local type=$4 + index=$(( (${port}-1)*4+${lane} )) + if [ "$type" == "${AOC_TYPE}" ]; then + SI_VAL=$(echo "${ce_aoc_si_value[$index]}" | awk '{print $'$field'}') + else + SI_VAL=$(echo "${ce_dac_si_value[$index]}" | awk '{print $'$field'}') + fi +} + +# set si value for xe port +function _qsfp_xe_si_set { + # convert PORT to xe port index + local xe_port=$PORT + # generate command for SI PRE value + get_xe_si $xe_port $SI_PRE_IDX $TYPE + local pre_cmd="phy xe${xe_port} CL93N72_UT_CTL2r CL93N72_TXFIR_PRE=${SI_VAL}" + # generate command for SI POST value + get_xe_si $xe_port $SI_POST_IDX $TYPE + local post_cmd="phy xe${xe_port} CL93N72_UT_CTL2r CL93N72_TXFIR_POST=${SI_VAL}" + # generate command for SI MAIN value + get_xe_si $xe_port $SI_MAIN_IDX $TYPE + local main_cmd="phy xe${xe_port} CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=${SI_VAL}" + # generate command for SI AMP CONTROL value + get_xe_si $xe_port $SI_AMP_IDX $TYPE + local amp_val=$SI_VAL + get_xe_si $xe_port $SI_DRI_IDX $TYPE + local dri_val=$SI_VAL + local amp_cmd="phy xe${xe_port} AMS_TX_CTL2r AMS_TX_AMP_CTL=${amp_val} AMS_TX_DRIVERMODE=${dri_val}" + # apply bcmcmd + bcmcmd "${pre_cmd};${post_cmd};${main_cmd};${amp_cmd}" +} + +# set aoc si value for ce port +function _qsfp_ce_si_set { + # convert PORT to ce port index + local ce_port=$(( $PORT - 48 )) + for lane in {0..3}; + do + # generate command for SI PRE value + get_ce_si $ce_port $lane $SI_PRE_IDX $TYPE + local pre_cmd="phy ce${ce_port} CL93N72_UT_CTL2r.${lane} CL93N72_TXFIR_PRE=${SI_VAL}" + # generate command for SI POST value + get_ce_si $ce_port $lane $SI_POST_IDX $TYPE + local post_cmd="phy ce${ce_port} CL93N72_UT_CTL2r.${lane} CL93N72_TXFIR_POST=${SI_VAL}" + # generate command for SI MAIN value + get_ce_si $ce_port $lane $SI_MAIN_IDX $TYPE + local main_cmd="phy ce${ce_port} CL93N72_UT_CTL3r.${lane} CL93N72_TXFIR_MAIN=${SI_VAL}" + # generate command for SI AMP CONTROL value + get_ce_si $ce_port $lane $SI_AMP_IDX $TYPE + local amp_val=$SI_VAL + get_ce_si $ce_port $lane $SI_AMP_IDX $TYPE + local dri_val=$SI_VAL + local amp_cmd="phy ce${ce_port} AMS_TX_CTL2r.${lane} AMS_TX_AMP_CTL=${amp_val} AMS_TX_DRIVERMODE=${dri_val}" + # apply bcmcmd + bcmcmd "${pre_cmd};${post_cmd};${main_cmd};${amp_cmd}" + done +} + +#QSFP SI value set +function _qsfp_si_set { + if [[ $PORT -le 47 && $PORT -ge 0 ]]; then + # xe port + _qsfp_xe_si_set + else + # ce port + _qsfp_ce_si_set + fi +} + +function _util_input_check { + # input parameter validation + if [[ $1 -lt $2 || $1 -gt $3 ]]; then + echo "Please input number $2~$3" + exit + fi +} + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} ${AOC_TYPE} [${MIN_PORT}-${MAX_PORT}]" + echo " : ${0} ${DAC_TYPE} [${MIN_PORT}-${MAX_PORT}]" + echo "----------------------------------------------------" +} + +#Main Function +function _main { + + # TODO: remove after SI value ready + #exit ${TRUE} + + if [ -z $PORT ]; then + _help + exit ${FALSE} + fi + + if [ "${TYPE}" == "help" ]; then + _help + elif [ "${TYPE}" == "${AOC_TYPE}" ] || [ "${TYPE}" == "${DAC_TYPE}" ]; then + _util_input_check "$PORT" "$MIN_PORT" "$MAX_PORT" + _qsfp_si_set + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/s8900_54xc_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/s8900_54xc_monitor.sh new file mode 100755 index 000000000000..974da6d5001f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-54xc/utils/s8900_54xc_monitor.sh @@ -0,0 +1,39 @@ +#!/bin/bash +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=5 +I2C_UTILS="/usr/sbin/i2c_utils.sh" + + +# LED status monitor +function _led_monitor { + ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_psu_status_set >/dev/null + ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null +} + +# main function +function _main { + while true + do + _led_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/README.md b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/README.md new file mode 100644 index 000000000000..28f395216e3c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/README.md @@ -0,0 +1,185 @@ +# Ingrasys S8900-64XC Platform Driver for SONiC + +Copyright (C) 2016 Ingrasys, Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + +## Licensing terms + +The Licensing terms of the files within this project is split 2 parts. +The Linux kernel is released under the GNU General Public License version 2. +All other code is released under the GNU General Public License version 3. +Please see the LICENSE file for copies of both licenses. + +## Contents of this package + + - service/ + > Service config files for platform initialization and monitoring + - utils/ + > Scripts useful during platform bringup and sysfs function + - conf/ + > Platform configure files. + +## Kernel modules and drivers + +The driver for interacting with Ingrasys S8900-64XC is contained in the I2C +kernel module and initialization script. The initialization script loads +the modules in the correct order. It has been built and tested against +the Linux 3.16 kernel. + +The initialization script will modprobe the needed modules, navigate to the +module's device directory in sysfs, and write configuration data to +the kernel module. + +### IGB + +This is OOB Ports on front panel for management plane. + +The IGB module must be loaded first on Ingrasys S8900-64XC platform. + +### I2C i801 + +The I2C i801 on Ingrasys S8900-64XC can be found in +`/sys/bus/i2c/devices/i2c-0/` + +This is I2C bus for Clock Gen, DIMM channel and digital potentiometers. + +The i801 module must be loaded second on Ingrasys S8900-64XC. + +### I2C iSMT + +The I2C iSMT module on S8900-64XC can be found in +`/sys/bus/i2c/devices/i2c-1/` + +This is I2C bus for CPLD, HWM, power controller and I2C Switches. + +The i801 module must be loaded third on Ingrasys S8900-64XC. + +### I2C PCA9548 +The PCA9548 module on S8900-64XC can be found in +`/sys/bus/i2c/devices/i2c-2/` , `/sys/bus/i2c/devices/i2c-3/`, +`/sys/bus/i2c/devices/i2c-4/`, `/sys/bus/i2c/devices/i2c-5/`, +`/sys/bus/i2c/devices/i2c-6/`, `/sys/bus/i2c/devices/i2c-7/`, +`/sys/bus/i2c/devices/i2c-8/`, `/sys/bus/i2c/devices/i2c-9/`. + +The pca9548 module for zQSFP module get/set functions, PSU information, +fan status and EEPROM. + +## Hardware components + +The hardware components are initialized in the init script on S8900-64XC. +The following describes manual initialization as well as interaction. +The examples below are just for Ingrasys S8900-64XC platform. + +### Hardware initialization + +When the sonic-platform-ingrasys-s8900-64xc package is installed on the S8900-64XC, +it is automatically initialized. If you want to manual initialization, the +utility command usage as follows: +``` + i2c_utils.sh i2c_init +``` + +### EEPROM + +The EEPROM is including the board SKU, model name, vendor name, serial number, +and other information can be accessed with the specific eeprom kernel module. +After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs. + +The hexdump utility can be used to decode the raw output of the EEPROM. +For example, +``` + bash# echo "mb_eeprom 0x54" > /sys/bus/i2c/devices/i2c-9/new_device + bash# cat /sys/bus/i2c/drivers/mb_eeprom/9-0054/eeprom | hexdump -C +``` + +### Front panel LEDs + +LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`. +Utility function command usage as follows: + +``` +Status LED: + i2c_utils.sh i2c_sys_led green|amber on|off + +Fan status LED: + i2c_utils.sh i2c_fan_led green|amber on|off + +PSU1 status LED: + i2c_utils.sh i2c_psu1_led green|amber on|off + +PSU2 status LED: + i2c_utils.sh i2c_psu2_led green|amber on|off + +``` +QSFP Module Port LEDs control by ASIC library. + + +### Fan speed + +Fan speed are controlled by the w83795 kernel module. +It can be found in `/sys/class/hwmon/hwmon1/device/`. +If they were compiled as modules, you will need to modprobe w83795 for +their sysfs entries to show up. Each fan has an `fan_input` file +for reading the fan speed. And `pwm1` setting fan1 to fan4, +`pwm2` setting fan5 to fan8. + +There is docker-platform-monitor container installed fancontrol package that can +automatic control platform fan speed. + + +### Temperature sensors + +Temperature sensors are controlled by the w83795 kernel +module. It can be found in `/sys/class/hwmon/hwmon1/device/`. +If they were compiled as modules, then you will need to modprobe w83795 for +their sysfs entries to show up. +`temp1_input` is front MAC temperature sensor. `temp2_input` is rear MAC +temperature sensor. + +There is docker-platform-monitor container installed lm-sensors package that can +monitor platform temperature. And `sensors` command can show each +temperature sensors status. + +### Power supplies + +Power supplies status and its EEPROM info can be used i2c utility +`/usr/sbin/i2c_utils.sh` to get. +The usage as follows: +``` +PSU EEPROM: + i2c_utils.sh i2c_psu_eeprom_get + hexdump -C psu0.rom + hexdump -C psu1.rom + +PSU Status: + i2c_utils.sh i2c_psu_status +``` + +### QSFPs +QSFP modules are managed by the pca9548 kernel driver. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +QSFP EEPROM: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + +QSFP Insert Event: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + 0 => not insert + 1 => inserted +``` + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/Makefile b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/Makefile new file mode 100644 index 000000000000..bf7d4baed71b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/Makefile @@ -0,0 +1,4 @@ +#ccflags-y += -DDEBUG +obj-m := eeprom_mb.o +obj-m+= qsfp_cpld.o +obj-m+= i2c_cpld.o diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/eeprom_mb.c b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/eeprom_mb.c new file mode 100644 index 000000000000..0886cad58eb3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/eeprom_mb.c @@ -0,0 +1,212 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57, I2C_CLIENT_END }; + + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 256 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void mb_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, ((u8)addr >> 8) & 0xFF, (u8)addr & 0xFF); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t mb_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + mb_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static struct bin_attribute mb_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = EEPROM_SIZE, + .read = mb_eeprom_read, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int mb_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x50. So decline + attaching to addresses >= 0x51 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51) { + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + return -ENODEV; + } + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int mb_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &mb_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int mb_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &mb_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id mb_eeprom_id[] = { + { "mb_eeprom", 0 }, + { } +}; + +static struct i2c_driver mb_eeprom_driver = { + .driver = { + .name = "mb_eeprom", + }, + .probe = mb_eeprom_probe, + .remove = mb_eeprom_remove, + .id_table = mb_eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = mb_eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(mb_eeprom_driver); + +MODULE_AUTHOR("Wade "); +MODULE_DESCRIPTION("Ingrasys S8900 Mother Borad EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/i2c_cpld.c b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/i2c_cpld.c new file mode 100644 index 000000000000..626c63177b50 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/i2c_cpld.c @@ -0,0 +1,448 @@ +/* + * S9100-32X I2C CPLD driver + * + * Copyright (C) 2017 Ingrasys, Inc. + * Wade He + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "i2c_cpld.h" + +#ifdef DEBUG + #define DEBUG_PRINT(fmt, args...) \ + printk(KERN_INFO "%s[%d]: " fmt "\r\n", \ + __FUNCTION__, __LINE__, ##args) +#else + #define DEBUG_PRINT(fmt, args...) +#endif + +#define I2C_READ_BYTE_DATA(ret, lock, i2c_client, reg) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_read_byte_data(i2c_client, reg); \ + mutex_unlock(lock); \ +} +#define I2C_WRITE_BYTE_DATA(ret, lock, i2c_client, reg, val) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_write_byte_data(i2c_client, reg, val); \ + mutex_unlock(lock); \ +} + +/* CPLD sysfs attributes index */ +enum i2c_cpld_sysfs_attributes { + CPLD_ACCESS_REG, + CPLD_REGISTER_VAL, + CPLD_PORT_START, + CPLD_PORTS, + CPLD_VERSION, + CPLD_ID, + CPLD_BOARD_TYPE, + CPLD_EXT_BOARD_TYPE, + CPLD_PW_GOOD, + CPLD_PW_ABS, +}; + +/* CPLD sysfs attributes hook functions */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_pw_good(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_pw_abs(struct device *dev, + struct device_attribute *da, char *buf); + +static LIST_HEAD(cpld_client_list); /* client list for cpld */ +static struct mutex list_lock; /* mutex for client list */ + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +struct cpld_data { + int index; /* CPLD index */ + struct mutex access_lock; /* mutex for cpld access */ + u8 access_reg; /* register to access */ +}; + +/* CPLD device id and data */ +static const struct i2c_device_id i2c_cpld_id[] = { + { "i2c_cpld", i2c_cpld }, + {} +}; + +/* Addresses scanned for i2c_cpld */ +static const unsigned short cpld_i2c_addr[] = { 0x33, I2C_CLIENT_END }; +/* platform sysfs object */ +extern struct kobject *s9230_64x_kobj; + + +/* define all support register access of cpld in attribute */ +static SENSOR_DEVICE_ATTR(cpld_access_register, S_IWUSR | S_IRUGO, + read_access_register, write_access_register, CPLD_ACCESS_REG); +static SENSOR_DEVICE_ATTR(cpld_register_value, S_IWUSR | S_IRUGO, + read_register_value, write_register_value, CPLD_REGISTER_VAL); +static SENSOR_DEVICE_ATTR(cpld_version, S_IRUGO, + read_cpld_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(cpld_board_type, S_IRUGO, + read_board_type, NULL, CPLD_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_ext_board_type, S_IRUGO, + read_ext_board_type, NULL, CPLD_EXT_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_pw_good, S_IRUGO, + read_pw_good, NULL, CPLD_PW_GOOD); +static SENSOR_DEVICE_ATTR(cpld_pw_abs, S_IRUGO, + read_pw_abs, NULL, CPLD_PW_ABS); + + +/* define support attributes of cpldx , total 5 */ +/* cpld 1 */ +static struct attribute *i2c_cpld_attributes[] = { + &sensor_dev_attr_cpld_access_register.dev_attr.attr, + &sensor_dev_attr_cpld_register_value.dev_attr.attr, + &sensor_dev_attr_cpld_version.dev_attr.attr, + &sensor_dev_attr_cpld_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_ext_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_pw_good.dev_attr.attr, + &sensor_dev_attr_cpld_pw_abs.dev_attr.attr, + NULL +}; + +/* cpld 1 attributes group */ +static const struct attribute_group i2c_cpld_group = { + .attrs = i2c_cpld_attributes, +}; + +/* read access register from cpld data */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + + return sprintf(buf, "0x%x\n", reg); +} + +/* write access register to cpld data */ +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + + if (kstrtou8(buf, 0, ®) < 0) + return -EINVAL; + + data->access_reg = reg; + return count; +} + +/* read the value of access register in cpld data */ +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + int reg_val; + + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + + if (reg_val < 0) + return -1; + + return sprintf(buf, "0x%x\n", reg_val); +} + +/* wrtie the value to access register in cpld data */ +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + int ret = -EIO; + u8 reg = data->access_reg; + u8 reg_val; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, client, reg, reg_val); + + return count; +} + +/* get cpdl version register value */ +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_VERSION) { + reg = CPLD_VERSION_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get board type register value */ +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_BOARD_TYPE) { + reg = CPLD_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_EXT_BOARD_TYPE) { + reg = CPLD_EXT_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_pw_good(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_PW_GOOD) { + reg = CPLD_PW_GOOD_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_pw_abs(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_PW_ABS) { + reg = CPLD_PW_ABS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* add valid cpld client to list */ +static void i2c_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = NULL; + + node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + if (!node) { + dev_info(&client->dev, + "Can't allocate cpld_client_node for index %d\n", + client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +/* remove exist cpld client in list */ +static void i2c_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + list_for_each(list_node, &cpld_client_list) { + cpld_node = list_entry(list_node, + struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + mutex_unlock(&list_lock); +} + +/* cpld drvier probe */ +static int i2c_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + struct cpld_data *data = NULL; + + data = kzalloc(sizeof(struct cpld_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* init cpld data for client */ + i2c_set_clientdata(client, data); + mutex_init(&data->access_lock); + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_info(&client->dev, + "i2c_check_functionality failed (0x%x)\n", + client->addr); + status = -EIO; + goto exit; + } + + + status = sysfs_create_group(&client->dev.kobj,&i2c_cpld_group); + + if (status) + goto exit; + + dev_info(&client->dev, "chip found\n"); + + /* add probe chip to client list */ + i2c_cpld_add_client(client); + + return 0; +exit: + sysfs_remove_group(&client->dev.kobj, &i2c_cpld_group); + return status; +} + +/* cpld drvier remove */ +static int i2c_cpld_remove(struct i2c_client *client) +{ + + sysfs_remove_group(&client->dev.kobj, &i2c_cpld_group); + + i2c_cpld_remove_client(client); + return 0; +} + +MODULE_DEVICE_TABLE(i2c, i2c_cpld_id); + +static struct i2c_driver i2c_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "i2c_cpld", + }, + .probe = i2c_cpld_probe, + .remove = i2c_cpld_remove, + .id_table = i2c_cpld_id, + .address_list = cpld_i2c_addr, +}; + +static int __init i2c_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&i2c_cpld_driver); +} + +static void __exit i2c_cpld_exit(void) +{ + i2c_del_driver(&i2c_cpld_driver); +} + +MODULE_AUTHOR("Wade He "); +MODULE_DESCRIPTION("Ingrasys S9100-32X Platform i2c cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_cpld_init); +module_exit(i2c_cpld_exit); + + + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/i2c_cpld.h b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/i2c_cpld.h new file mode 100644 index 000000000000..e103b05c717a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/i2c_cpld.h @@ -0,0 +1,197 @@ +/* + * + * S9100-32X I2C CPLD driver header file + * + * Copyright (C) 2017 Ingrasys, Inc. + * Wade He + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef I2C_CPLD_H +#define I2C_CPLD_H + +// remove debug before release +#define DEBUG + +/* CPLD device index value */ +enum cpld_id { + i2c_cpld +}; + +/* port number on CPLD */ +#define CPLD_1_PORT_NUM 12 +#define CPLD_2_PORT_NUM 13 + +/* QSFP port number */ +#define QSFP_MAX_PORT_NUM 64 +#define QSFP_MIN_PORT_NUM 1 + +/* SFP+ port number */ +#define SFP_MAX_PORT_NUM 2 +#define SFP_MIN_PORT_NUM 1 + + +/* CPLD registers */ +#define CPLD_BOARD_TYPE_REG 0x0 +#define CPLD_EXT_BOARD_TYPE_REG 0x7 +#define CPLD_VERSION_REG 0x1 +#define CPLD_PW_GOOD_REG 0x2 +#define CPLD_PW_ABS_REG 0x3 + + +/* bit definition for register value */ + +enum CPLD_RESET_CONTROL_BITS { + CPLD_RESET_CONTROL_SWRST_BIT, + CPLD_RESET_CONTROL_CP2104RST_BIT, + CPLD_RESET_CONTROL_82P33814RST_BIT, + CPLD_RESET_CONTROL_BMCRST_BIT, +}; + +/* bit field structure for register value */ +struct cpld_reg_board_type_t { + u8 build_rev:2; + u8 hw_rev:2; + u8 board_id:4; +}; + +struct cpld_reg_version_t { + u8 revision:6; + u8 release:1; + u8 reserve:1; +}; + +struct cpld_reg_pw_good_t { + u8 reserve1:3; + u8 psu1:1; + u8 psu2:1; + u8 reserve2:3; +}; + +struct cpld_reg_pw_abs_t { + u8 psu1:1; + u8 psu2:1; + u8 reserve:6; +}; + +/* common manipulation */ +#define INVALID(i, min, max) ((i < min) || (i > max) ? 1u : 0u) +#define READ_BIT(val, bit) ((0u == (val & (1<bf_name) +#define READ_BF_1(bf_struct, val, bf_name, bf_value) \ + bf_struct bf; \ + bf.data = val; \ + bf_value = bf.bf_name +#define BOARD_TYPE_BUILD_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, build_rev, res) +#define BOARD_TYPE_HW_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, hw_rev, res) +#define BOARD_TYPE_BOARD_ID_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, board_id, res) +#define CPLD_VERSION_REV_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, revision, res) +#define CPLD_VERSION_REL_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, release, res) +#define CPLD_PSU1_PW_GOOD_GET(val, res) \ + READ_BF(cpld_reg_pw_good_t, val, psu1, res) +#define CPLD_PSU2_PW_GOOD_GET(val, res) \ + READ_BF(cpld_reg_pw_good_t, val, psu2, res) +#define CPLD_PSU1_PW_ABS_GET(val, res) \ + READ_BF(cpld_reg_pw_abs_t, val, psu1, res) +#define CPLD_PSU2_PW_ABS_GET(val, res) \ + READ_BF(cpld_reg_pw_abs_t, val, psu2, res) +/* QSFP/SFP registers manipulation */ +#define QSFP_TO_CPLD_IDX(qsfp_port, cpld_index, cpld_port) \ +{ \ + if (QSFP_MIN_PORT_NUM <= qsfp_port && qsfp_port <= CPLD_1_PORT_NUM) { \ + cpld_index = cpld1; \ + cpld_port = qsfp_port - 1; \ + } else if (CPLD_1_PORT_NUM < qsfp_port \ + && qsfp_port <= QSFP_MAX_PORT_NUM) { \ + cpld_index = cpld2 + (qsfp_port - 1 - CPLD_1_PORT_NUM) \ + / CPLD_2_PORT_NUM; \ + cpld_port = (qsfp_port - 1 - CPLD_1_PORT_NUM) % \ + CPLD_2_PORT_NUM; \ + } else { \ + cpld_index = 0; \ + cpld_port = 0; \ + } \ +} +#define SFP_TO_CPLD_IDX(sfp_port, cpld_index) \ + (cpld_index = sfp_port - SFP_MIN_PORT_NUM) +#define QSFP_PORT_STATUS_REG(cpld_port) \ + (CPLD_QSFP_PORT_STATUS_BASE_REG + cpld_port) +#define QSFP_PORT_CONFIG_REG(cpld_port) \ + (CPLD_QSFP_PORT_CONFIG_BASE_REG + cpld_port) +#define QSFP_PORT_INT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_INT_BIT) +#define QSFP_PORT_ABS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_ABS_BIT) +#define QSFP_PORT_RESET_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_RESET_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_RESET_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_LPMODE_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define SFP_PORT_PRESENT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_PRESENT_BIT) + + #define SFP_PORT_TXFAULT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_TXFAULT_BIT) + #define SFP_PORT_RXLOS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_RXLOS_BIT) + #define SFP_PORT_TXDIS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_RS_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_TS_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) +#define SFP_PORT_TXDIS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_TXDIS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_RS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_RS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_TS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) +#define SFP_PORT_TS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) + +/* CPLD access functions */ +extern int i2c_cpld_get_qsfp_port_status_val(u8 port_num); +extern int i2c_cpld_get_qsfp_port_config_val(u8 port_num); +extern int i2c_cpld_set_qsfp_port_config_val(u8 port_num, u8 reg_val); +extern int i2c_cpld_get_sfp_port_status_val(u8 port_num); +extern int i2c_cpld_get_sfp_port_config_val(u8 port_num); +extern int i2c_cpld_set_sfp_port_config_val(u8 port_num, u8 reg_val); +extern u8 fp_port_to_phy_port(u8 fp_port); +#endif + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/qsfp_cpld.c b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/qsfp_cpld.c new file mode 100644 index 000000000000..8ec03ecea340 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/modules/qsfp_cpld.c @@ -0,0 +1,1771 @@ +/* + * S8900-64XC QSFP CPLD driver + * + * Copyright (C) 2017 Ingrasys, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#ifdef DEBUG + #define DEBUG_PRINT(fmt, args...) \ + printk (KERN_INFO "%s[%d]: " fmt "\r\n", \ + __FUNCTION__, __LINE__, ##args) +#else + #define DEBUG_PRINT(fmt, args...) +#endif + +#define ERROR_MSG(fmt, args...) \ + printk(KERN_ERR "%s[%d]: " fmt "\r\n", \ + __FUNCTION__, __LINE__, ##args) + + + + +#define SFF_8436_MMAP_SIZE (256) +#define EEPROM_SIZE (5 * 128) /* 640 byte eeprom */ +#define EEPROM_PAGE_SIZE (128) +#define EEPROM_DEFAULT_PAGE (0) +#define I2C_RW_RETRY_COUNT (3) +#define I2C_RW_RETRY_INTERVAL (100) /* ms */ +#define USE_I2C_BLOCK_READ (1) + +#define SFP_EEPROM_A0_I2C_ADDR (0xA0 >> 1) + +#define SFF_8436_PAGE_PROV_ADDR (0xC3) /* Memory Page 01/02 Provided */ +#define SFF_8436_PAGE_01_PRESENT (1 << 6) /* Memory Page 01 present */ +#define SFF_8436_PAGE_02_PRESENT (1 << 7) /* Memory Page 02 present */ +#define SFF_8436_PAGE_SELECT_ADDR (0x7F) +#define SFF_8436_STATUS_ADDR (0x02) +#define SFF_8436_STATUS_PAGE_03_PRESENT_L (1 << 2) /* Flat Memory:0-Paging, 1-Page 0 only */ + +#define S8900_64XC_MUX_BASE_NR 1 +#define S8900_64XC_SFP_EEPROM_BASE_NR 2 +#define CPLD_DEVICE_NUM 3 +#define SFP_CPLD_DEVICE_NUM 2 +#define QSFP_EEPROM_DEVICE_NUM 3 +#define TOTAL_PORT_NUM 64 +#define CPLD_MUX_OFFSET 24 +#define SFP_EEPROM_DEV_NUM 3 +#define SFP_EEPROM_NAME_LEN 16 +/* CPLD registers */ +#define CPLD_REG_REV 0x01 +#define CPLD_REG_ID 0x02 +#define CPLD_MUX_REG 0x4a + +/* QSFP signal bit in register */ +#define BIT_RST 0 +#define BIT_LPM 2 +#define BIT_INT 0 +#define BIT_ABS 1 +#define BIT_ABS_2 5 + +static ssize_t sfp_eeprom_read(struct i2c_client *, loff_t, u8 *,int); +static ssize_t sfp_eeprom_write(struct i2c_client *, loff_t, const char *,int); + + +enum port_numbers { + sfp1, sfp2, sfp3, sfp4, sfp5, sfp6, sfp7, sfp8, + sfp9, sfp10, sfp11, sfp12, sfp13, sfp14, sfp15, sfp16, + sfp17, sfp18, sfp19, sfp20, sfp21, sfp22, sfp23, sfp24, + sfp25, sfp26, sfp27, sfp28, sfp29, sfp30, sfp31, sfp32, + sfp33, sfp34, sfp35, sfp36, sfp37, sfp38, sfp39, sfp40, + sfp41, sfp42, sfp43, sfp44, sfp45, sfp46, sfp47, sfp48, + qsfp49, qsfp50, qsfp51, qsfp52, qsfp53, qsfp54, qsfp55, qsfp56, + qsfp57, qsfp58, qsfp59, qsfp60, qsfp61, qsfp62, qsfp63, qsfp64 +}; + +static const struct platform_device_id qsfp_device_id[] = { + {"sfp1", sfp1}, {"sfp2", sfp2}, {"sfp3", sfp3}, {"sfp4", sfp4}, + {"sfp5", sfp5}, {"sfp6", sfp6}, {"sfp7", sfp7}, {"sfp8", sfp8}, + {"sfp9", sfp9}, {"sfp10", sfp10}, {"sfp11", sfp11}, {"sfp12", sfp12}, + {"sfp13", sfp13}, {"sfp14", sfp14}, {"sfp15", sfp15}, {"sfp16", sfp16}, + {"sfp17", sfp17}, {"sfp18", sfp18}, {"sfp19", sfp19}, {"sfp20", sfp20}, + {"sfp21", sfp21}, {"sfp22", sfp22}, {"sfp23", sfp23}, {"sfp24", sfp24}, + {"sfp25", sfp25}, {"sfp26", sfp26}, {"sfp27", sfp27}, {"sfp28", sfp28}, + {"sfp29", sfp29}, {"sfp30", sfp30}, {"sfp31", sfp31}, {"sfp32", sfp32}, + {"sfp33", sfp33}, {"sfp34", sfp34}, {"sfp35", sfp35}, {"sfp36", sfp36}, + {"sfp37", sfp37}, {"sfp38", sfp38}, {"sfp39", sfp39}, {"sfp40", sfp40}, + {"sfp41", sfp41}, {"sfp42", sfp42}, {"sfp43", sfp43}, {"sfp44", sfp44}, + {"sfp45", sfp45}, {"sfp46", sfp46}, {"sfp47", sfp47}, {"sfp48", sfp48}, + {"qsfp49", qsfp49}, {"qsfp50", qsfp50}, {"qsfp51", qsfp51}, {"qsfp52", qsfp52}, + {"qsfp53", qsfp53}, {"qsfp54", qsfp54}, {"qsfp55", qsfp55}, {"qsfp56", qsfp56}, + {"qsfp57", qsfp57}, {"qsfp58", qsfp58}, {"qsfp59", qsfp59}, {"qsfp60", qsfp60}, + {"qsfp61", qsfp61}, {"qsfp62", qsfp62}, {"qsfp63", qsfp63}, {"qsfp64", qsfp64}, + {} +}; +MODULE_DEVICE_TABLE(platform, qsfp_device_id); + +/* + * list of valid port types + * note OOM_PORT_TYPE_NOT_PRESENT to indicate no + * module is present in this port + */ +typedef enum oom_driver_port_type_e { + OOM_DRIVER_PORT_TYPE_INVALID, + OOM_DRIVER_PORT_TYPE_NOT_PRESENT, + OOM_DRIVER_PORT_TYPE_SFP, + OOM_DRIVER_PORT_TYPE_SFP_PLUS, + OOM_DRIVER_PORT_TYPE_QSFP, + OOM_DRIVER_PORT_TYPE_QSFP_PLUS, + OOM_DRIVER_PORT_TYPE_QSFP28 +} oom_driver_port_type_t; + +enum driver_type_e { + DRIVER_TYPE_SFP_MSA, + DRIVER_TYPE_SFP_DDM, + DRIVER_TYPE_QSFP +}; + +typedef enum eeprom_operation_e { + EEPROM_READ, + EEPROM_WRITE +} eeprom_operation_t; + +/* + * Each client has this additional data + */ +struct eeprom_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + struct bin_attribute bin; /* eeprom data */ +}; + +struct qsfp_data { + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 status[3]; /* bit0:port0, bit1:port1 and so on */ + /* index 0 => tx_fail + 1 => tx_disable + 2 => rx_loss + */ + u8 device_id; + struct eeprom_data eeprom; +}; + +struct sfp_port_data { + struct mutex update_lock; + enum driver_type_e driver_type; + int port; /* CPLD port index */ + oom_driver_port_type_t port_type; + u64 present; /* present status, bit0:port0, bit1:port1 and so on */ + + struct qsfp_data *qsfp; + + struct i2c_client *client; +}; + +enum sfp_sysfs_attributes { + PRESENT, + PRESENT_ALL, + PORT_NUMBER, + PORT_TYPE, + DDM_IMPLEMENTED, + TX_FAULT, + TX_FAULT1, + TX_FAULT2, + TX_FAULT3, + TX_FAULT4, + TX_DISABLE, + TX_DISABLE1, + TX_DISABLE2, + TX_DISABLE3, + TX_DISABLE4, + TX_DISABLE_ALL, + RX_LOS, + RX_LOS1, + RX_LOS2, + RX_LOS3, + RX_LOS4, + RX_LOS_ALL, +}; + +static void device_release(struct device *dev) +{ + return; +} + +/* + * S8900-64XC CPLD register addresses + */ +static const int int_abs_reg[CPLD_DEVICE_NUM][2]= { + {0x20, 0x31}, + {0x20, 0x31}, + {0x20, 0x2F}, +}; + +static const int rst_lp_reg[CPLD_DEVICE_NUM][2]= { + {0xFF, 0xFF}, /*dummy*/ + {0xFF, 0xFF}, /*dummy*/ + {0x30, 0x3F}, +}; + +/* + * S8900-64XC CPLD + */ + +enum cpld_type { + cpld_1, + cpld_2, + cpld_3, +}; + +enum qsfp_signal { + sig_int, + sig_abs, + sig_rst, + sig_lpm +}; + +struct cpld_platform_data { + int reg_addr; + struct i2c_client *client; +}; + +struct sfp_platform_data { + int reg_addr; + int parent; + int cpld_reg; + struct i2c_client *client; +}; + +static struct cpld_platform_data s8900_64xc_cpld_platform_data[] = { + [cpld_1] = { + .reg_addr = 0x33, + }, + + [cpld_2] = { + .reg_addr = 0x33, + }, + + [cpld_3] = { + .reg_addr = 0x33, + } +}; + +static struct sfp_platform_data s8900_64xc_sfp_platform_data[] = { + [sfp1] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x01, + }, + + [sfp2] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x02, + }, + + [sfp3] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x03, + }, + [sfp4] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x04, + }, + + [sfp5] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x05, + }, + + [sfp6] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x06, + }, + [sfp7] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x07, + }, + + [sfp8] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x08, + }, + + [sfp9] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x09, + }, + [sfp10] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x0A, + }, + + [sfp11] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x0B, + }, + + [sfp12] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x0C, + }, + [sfp13] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x0D, + }, + + [sfp14] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x0E, + }, + + [sfp15] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x0F, + }, + [sfp16] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x10, + }, + + [sfp17] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x11, + }, + + [sfp18] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x12, + }, + [sfp19] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x13, + }, + + [sfp20] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x14, + }, + + [sfp21] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x15, + }, + [sfp22] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x16, + }, + + [sfp23] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x17, + }, + + [sfp24] = { + .reg_addr = 0x50, + .parent = 2, + .cpld_reg = 0x18, + }, + [sfp25] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x01, + }, + + [sfp26] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x02, + }, + [sfp27] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x03, + }, + + [sfp28] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x04, + }, + + [sfp29] = { + .reg_addr = 0x50, + + .parent = 3, + .cpld_reg = 0x05, + }, + [sfp30] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x06, + }, + [sfp31] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x07, + }, + [sfp32] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x08, + }, + [sfp33] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x09, + }, + [sfp34] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x0A, + }, + [sfp35] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x0B, + }, + [sfp36] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x0C, + }, + [sfp37] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x0D, + }, + [sfp38] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x0E, + }, + [sfp39] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x0F, + }, + [sfp40] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x10, + }, + [sfp41] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x11, + }, + [sfp42] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x12, + }, + [sfp43] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x13, + }, + [sfp44] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x14, + }, + [sfp45] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x15, + }, + [sfp46] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x16, + }, + [sfp47] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x17, + }, + [sfp48] = { + .reg_addr = 0x50, + .parent = 3, + .cpld_reg = 0x18, + }, + [qsfp49] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x01, + }, + [qsfp50] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x02, + }, + [qsfp51] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x03, + }, + [qsfp52] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x04, + }, + [qsfp53] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x05, + }, + [qsfp54] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x06, + }, + [qsfp55] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x07, + }, + [qsfp56] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x08, + }, + [qsfp57] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x09, + }, + [qsfp58] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x0A, + }, + [qsfp59] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x0B, + }, + [qsfp60] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x0C, + }, + [qsfp61] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x0D, + }, + [qsfp62] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x0E, + }, + [qsfp63] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x0F, + }, + [qsfp64] = { + .reg_addr = 0x50, + .parent = 4, + .cpld_reg = 0x10, + } +}; + +static struct platform_device s8900_64xc_cpld = { + .name = "ingrasys-s8900-64xc-cpld", + .id = 0, + .dev = { + .platform_data = s8900_64xc_cpld_platform_data, + .release = device_release + }, +}; + +static struct platform_device s8900_64xc_sfp = { + .name = "ingrasys-s8900-64xc-sfp", + .id = 0, + .dev = { + .platform_data = s8900_64xc_sfp_platform_data, + .release = device_release + }, +}; + +/* + * S8900-64XC I2C DEVICES + */ + +struct i2c_device_platform_data { + int parent; + struct i2c_board_info info; + struct i2c_client *client; +}; + +/* module_platform_driver */ +static ssize_t +get_prs_cpld_reg(struct device *dev, + struct device_attribute *devattr, + char *buf, int signal) +{ + int ret; + u64 data = 0; + u64 shift = 0; + int i = 0; + int j = 0; + int port = 0; + int bit = 0; + int bit_mask = 0; + int bit_mask_2 = 0; + int (*reg)[CPLD_DEVICE_NUM][2]; + struct cpld_platform_data *pdata = NULL; + + pdata = dev->platform_data; + + switch(signal) { + case sig_int: + bit = BIT_INT; + reg = (typeof(reg)) &int_abs_reg; + break; + case sig_abs: + bit = BIT_ABS; + reg = (typeof(reg)) &int_abs_reg; + break; + default: + return sprintf(buf, "signal/na"); + } + bit_mask = 0x1 << bit; + bit_mask_2 = 0x1 << BIT_ABS_2; + + for (i=0; i= 0x2a && j <= 0x2f && i < SFP_CPLD_DEVICE_NUM) { + continue; + } + ret = i2c_smbus_read_byte_data(pdata[i].client, j); + if (ret < 0) { + return sprintf((char *)buf, "i2c_smbus_read_byte_data/na"); + } + shift = ((u64) ((ret & bit_mask) >> bit)) << port; + data |= shift; + DEBUG_PRINT("port=%d, shift=0x%016llx, ret=%x, bit_mask=%08x, bit=%08x, data=0x%016llx\n", port, shift, ret, bit_mask, bit, data); + /* CPLD2 and CPLD3 have BIT 1 and BIT 5 for present */ + if (i < SFP_CPLD_DEVICE_NUM) { + port++; + shift = ((u64) ((ret & bit_mask_2) >> BIT_ABS_2)) << port; + data |= shift; + DEBUG_PRINT("port=%d, shift=0x%016llx, ret=%x, bit_mask_2=0x%x, bit=%x, data=0x%016llx\n", port, shift, ret, bit_mask_2, bit, data); + } + + port++; + } + } + + return sprintf((char *)buf, "0x%016llx\n", data); +} + +/* module_platform_driver */ +static ssize_t +get_rst_lp_cpld_reg(struct device *dev, + struct device_attribute *devattr, + char *buf, int signal) +{ + int ret; + u64 data = 0; + u64 shift = 0; + int i = 0; + int j = 0; + int port = 0; + int bit = 0; + int bit_mask = 0; + int (*reg)[CPLD_DEVICE_NUM][2]; + struct cpld_platform_data *pdata = NULL; + + pdata = dev->platform_data; + + switch(signal) { + case sig_rst: + bit = BIT_RST; + reg = (typeof(reg)) &rst_lp_reg; + break; + case sig_lpm: + bit = BIT_LPM; + reg = (typeof(reg)) &rst_lp_reg; + break; + default: + return sprintf(buf, "na"); + } + bit_mask = 0x1 << bit; + + for (i=2; i> bit)) << port; + data |= shift; + port++; + } + } + + return sprintf(buf, "0x%04llx\n", data); +} + +static ssize_t +set_rst_lp_cpld_reg(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count, int signal) +{ + unsigned long data; + int err; + struct cpld_platform_data *pdata = dev->platform_data; + u8 current_reg_val = 0; + u8 new_reg_val = 0; + int value; + int i = 0; + int j = 0; + int port = 0; + int ret = 0; + int bit = 0; + int (*reg)[CPLD_DEVICE_NUM][2]; + + err = kstrtoul(buf, 16, &data); + if (err) + return err; + + switch(signal) { + case sig_rst: + bit = BIT_RST; + reg = (typeof(reg)) &rst_lp_reg; + break; + case sig_lpm: + bit = BIT_LPM; + reg = (typeof(reg)) &rst_lp_reg; + break; + default: + return sprintf((char *)buf, "signal/na"); + } + + for (i=2; i> port) & 0x1; + + //set value on bit N of new_reg_val + if (value > 0) { + new_reg_val = current_reg_val | (u8) (0x1 << bit); + } else { + new_reg_val = current_reg_val & (u8) ~(0x1 << bit); + } + //write reg value if changed + if (current_reg_val != new_reg_val) { + ret = i2c_smbus_write_byte_data(pdata[i].client, j, + (u8)(new_reg_val)); + if (ret < 0){ + return ret; + } + } + port++; + } + } + + return count; +} + +static ssize_t +get_lpmode(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return get_rst_lp_cpld_reg(dev, devattr, buf, sig_lpm); +} + +static ssize_t +set_lpmode(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + return set_rst_lp_cpld_reg(dev, devattr, buf, count, sig_lpm); +} + +static ssize_t +get_reset(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return get_rst_lp_cpld_reg(dev, devattr, buf, sig_rst); +} + +static ssize_t +set_reset(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + return set_rst_lp_cpld_reg(dev, devattr, buf, count, sig_rst); +} + +static ssize_t +get_modprs(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return get_prs_cpld_reg(dev, devattr, buf, sig_abs); +} + +static DEVICE_ATTR(qsfp_modprs, S_IRUGO, get_modprs, NULL); +static DEVICE_ATTR(qsfp_lpmode, S_IRUGO | S_IWUSR, get_lpmode, set_lpmode); +static DEVICE_ATTR(qsfp_reset, S_IRUGO | S_IWUSR, get_reset, set_reset); + +static struct attribute *s8900_64xc_cpld_attrs[] = { + &dev_attr_qsfp_lpmode.attr, + &dev_attr_qsfp_reset.attr, + &dev_attr_qsfp_modprs.attr, + NULL, +}; + +static struct attribute_group s8900_64xc_cpld_attr_grp = { + .attrs = s8900_64xc_cpld_attrs, +}; + +/* + * Assumes that sanity checks for offset happened at sysfs-layer. + * Offset within Lower Page 00h and Upper Page 00h are not recomputed + */ +static uint8_t +sff_8436_translate_offset(loff_t *offset) +{ + unsigned page = 0; + + if (*offset < SFF_8436_MMAP_SIZE) { + return 0; + } + + page = (*offset >> 7)-1; + + if (page > 0 ) { + *offset = 0x80 + (*offset & 0x7f); + } else { + *offset &= 0xff; + } + + return page; +} + +static ssize_t +eeprom_read(struct i2c_client *client, + u8 command, const char *data, + int data_len) +{ +#if USE_I2C_BLOCK_READ + int result, retry = I2C_RW_RETRY_COUNT; + + if (data_len > I2C_SMBUS_BLOCK_MAX) { + data_len = I2C_SMBUS_BLOCK_MAX; + } + + while (retry) { + result = i2c_smbus_read_i2c_block_data(client, command, + data_len, (u8 *)data); + if (result < 0) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(result < 0)) { + goto abort; + } + + if (unlikely(result != data_len)) { + result = -EIO; + goto abort; + } + +abort: + return result; +#else + int result, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + result = i2c_smbus_read_byte_data(client, command); + if (result < 0) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(result < 0)) { + dev_dbg(&client->dev, "sfp read byte data failed, " \\ + "command(0x%2x), data(0x%2x)\r\n", + command, result); + goto abort; + } + + *data = (u8)result; + result = 1; + +abort: + return result; +#endif +} + +static ssize_t +eeprom_write(struct i2c_client *client, + u8 command, const char *data, + int data_len) +{ +#if USE_I2C_BLOCK_READ + int result, retry = I2C_RW_RETRY_COUNT; + + if (data_len > I2C_SMBUS_BLOCK_MAX) { + data_len = I2C_SMBUS_BLOCK_MAX; + } + + while (retry) { + result = i2c_smbus_write_i2c_block_data(client, command, data_len, data); + if (result < 0) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(result < 0)) { + return result; + } + + return data_len; +#else + int result, retry = I2C_RW_RETRY_COUNT; + + while (retry) { + result = i2c_smbus_write_byte_data(client, command, *data); + if (result < 0) { + msleep(I2C_RW_RETRY_INTERVAL); + retry--; + continue; + } + + break; + } + + if (unlikely(result < 0)) { + return result; + } + + return 1; +#endif +} + +static ssize_t +sfp_eeprom_read_write(struct i2c_client *client, + eeprom_operation_t op, + loff_t off, + const char *data, + int data_len) +{ + u8 page, phy_page; + u8 val, refresh_page = 0; + int ret; + ssize_t retval = 0; + size_t pending_len = 0, page_len = 0; + loff_t page_offset = 0, page_start_offset = 0; + loff_t phy_offset; + + + if (off > EEPROM_SIZE) { + return 0; + } + + if (off + data_len > EEPROM_SIZE) { + data_len = EEPROM_SIZE - off; + } + + /* + * Refresh pages which covers the requested data + * from offset to off + len + * Only refresh pages which contain requested bytes + * + */ + + pending_len = data_len; + + for (page = off >> 7; page <= (off + data_len - 1) >> 7; page++) { + refresh_page = 0; + switch (page) { + case 0: + /* Lower page 00h */ + refresh_page = 1; + break; + case 1: + /* Upper page 00h */ + refresh_page = 1; + break; + case 2: + /* Upper page 01h */ + ret = eeprom_read(client, SFF_8436_PAGE_PROV_ADDR, &val, sizeof(val)); + if (ret < 0) { + DEBUG_PRINT("Can't read EEPROM offset %d.\n", + SFF_8436_PAGE_PROV_ADDR); + goto error; + } + if (val & SFF_8436_PAGE_01_PRESENT) { + DEBUG_PRINT("Offset:%d Value:(0x%02x & 0x%02x)", + SFF_8436_PAGE_PROV_ADDR, val, + SFF_8436_PAGE_01_PRESENT); + refresh_page = 1; + } + break; + case 3: + /* Upper page 02h */ + ret = eeprom_read(client, SFF_8436_PAGE_PROV_ADDR, &val, sizeof(val)); + if (ret < 0) { + ERROR_MSG("Can't read EEPROM offset %d.\n", + SFF_8436_PAGE_PROV_ADDR); + goto error; + } + if (val & SFF_8436_PAGE_02_PRESENT) { + DEBUG_PRINT("Offset:%d Value:(0x%02x & 0x%02x)", + SFF_8436_PAGE_PROV_ADDR, val, + SFF_8436_PAGE_02_PRESENT); + refresh_page = 1; + } + break; + case 4: + /* Upper page 03h */ + ret = eeprom_read(client, SFF_8436_STATUS_ADDR, &val, sizeof(val)); + if (ret < 0) { + ERROR_MSG("Can't read EEPROM offset %d.\n", + SFF_8436_STATUS_ADDR); + goto error; + } + if (!(val & SFF_8436_STATUS_PAGE_03_PRESENT_L)) { + DEBUG_PRINT("Offset:%d Value:(0x%02x & 0x%02x)", + SFF_8436_STATUS_ADDR, val, + SFF_8436_STATUS_PAGE_03_PRESENT_L); + refresh_page = 1; + } + break; + default: + DEBUG_PRINT("Invalid Page %d\n", page); + ret = retval; + goto error; + break; + } + + if (!refresh_page) { + /* if page is not valid or already refreshed */ + continue; + } + + /* + * Compute the offset and number of bytes to be read/write + * w.r.t requested page + * + * 1. start at offset 0 (within the page), and read/write the entire page + * 2. start at offset 0 (within the page) and read/write less than entire page + * 3. start at an offset not equal to 0 and read/write the rest of the page + * 4. start at an offset not equal to 0 and read/write less than (end of page - offset) + * + */ + page_start_offset = page * EEPROM_PAGE_SIZE; + + if (page_start_offset < off) { + page_offset = off; + if (off + pending_len < page_start_offset + EEPROM_PAGE_SIZE) { + page_len = pending_len; + } else { + page_len = EEPROM_PAGE_SIZE - off; + } + } else { + page_offset = page_start_offset; + if (pending_len > EEPROM_PAGE_SIZE) { + page_len = EEPROM_PAGE_SIZE; + } else { + page_len = pending_len; + } + } + + pending_len = pending_len - page_len; + + /* Change current EEPROM page */ + phy_offset = page_offset; + phy_page = sff_8436_translate_offset(&phy_offset); + if (phy_page > 0) { + ret = eeprom_write(client, SFF_8436_PAGE_SELECT_ADDR, + &phy_page, sizeof(phy_page)); + if (ret < 0) { + ERROR_MSG("Can't write EEPROM offset %d.\n", + SFF_8436_PAGE_SELECT_ADDR); + goto error; + } + } + + /* + * If page_len > 32, I2C client continue read or write EEPROM. + */ + while (page_len) { + if (op == EEPROM_READ) { + ret = eeprom_read(client, phy_offset, data, page_len); + } else if (op == EEPROM_WRITE) { + ret = eeprom_write(client, phy_offset, data, page_len); + } else { + ERROR_MSG("Bad EEPROM operation %d.\n", op); + break; + } + + if (ret <= 0) { + if (retval == 0) { + retval = ret; + } + break; + } + phy_offset += ret; + off += ret; + data += ret; + page_len -= ret; + retval += ret; + } + + /* Restore EEPROM page to default */ + if (phy_page > 0) { + phy_page = EEPROM_DEFAULT_PAGE; + ret = eeprom_write(client, SFF_8436_PAGE_SELECT_ADDR, + &phy_page, sizeof(phy_page)); + if (ret < 0) { + ERROR_MSG("Can't write EEPROM offset %d.\n", + SFF_8436_PAGE_SELECT_ADDR); + goto error; + } + } + } + + return retval; + +error: + return ret; +} + + +static inline ssize_t +sfp_eeprom_read(struct i2c_client *client, + loff_t off, u8 *data, + int data_len) +{ + return sfp_eeprom_read_write(client, EEPROM_READ, + off, data, data_len); +} + + +static inline ssize_t +sfp_eeprom_write(struct i2c_client *client, + loff_t off, const char *data, + int data_len) +{ + return sfp_eeprom_read_write(client, EEPROM_WRITE, + off, data, data_len); +} + +static struct i2c_client * +cpld_sfp_port_client(int port, + int *data_reg) +{ + *data_reg = s8900_64xc_sfp_platform_data[port].cpld_reg; + if (port >= sfp1 && port <= sfp24) { + return s8900_64xc_cpld_platform_data[cpld_1].client; + } else if (port >= sfp25 && port <= sfp48) { + return s8900_64xc_cpld_platform_data[cpld_2].client; + } else if (port >= qsfp49 && port <= qsfp64) { + return s8900_64xc_cpld_platform_data[cpld_3].client; + } else { + ERROR_MSG("Unknown port: %d", port); + return NULL; + } +} + +static ssize_t +sfp_port_read(struct sfp_port_data *data, + char *buf, loff_t off, + size_t count, int port) +{ + ssize_t retval = 0; + int data_reg = 0; + struct i2c_client *cpld_client = NULL; + + if (unlikely(!count)) { + DEBUG_PRINT("Count = 0, return"); + return count; + } + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&data->update_lock); + + //CPLD MUX select + cpld_client = cpld_sfp_port_client(port, &data_reg); + DEBUG_PRINT("data_reg=%d, port=%d", data_reg, port); + if (!cpld_client) { + ERROR_MSG("Error i2c client for port %d", port); + return 0; + } + i2c_smbus_write_byte_data(cpld_client, CPLD_MUX_REG ,data_reg); + + while (count) { + ssize_t status; + + status = sfp_eeprom_read(data->client, off, buf, count); + if (status <= 0) { + if (retval == 0) { + retval = status; + } + break; + } + + buf += status; + off += status; + count -= status; + retval += status; + } + + //CPLD MUX deselect + i2c_smbus_write_byte_data(cpld_client, CPLD_MUX_REG ,0x0); + + mutex_unlock(&data->update_lock); + return retval; +} + +static ssize_t +sfp_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct sfp_port_data *data; + struct platform_device_id *dev_id = NULL; + + dev_id = (struct platform_device_id *)attr->private; + + DEBUG_PRINT("offset = (%lld), count = (%ld) dev_port=%d", off, count, (int)dev_id->driver_data); + data = dev_get_drvdata(container_of(kobj, struct device, kobj)); + + return sfp_port_read(data, buf, off, count, (int)dev_id->driver_data); +} + +static ssize_t +sfp_port_write(struct sfp_port_data *data, + const char *buf, loff_t off, + size_t count, int port) +{ + ssize_t retval = 0; + int data_reg = 0; + struct i2c_client *cpld_client = NULL; + + if (unlikely(!count)) { + return count; + } + + /* + * Write data to chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&data->update_lock); + + //CPLD MUX select + cpld_client = cpld_sfp_port_client(port, &data_reg); + DEBUG_PRINT("data_reg=%d, port=%d", data_reg, port); + if (!cpld_client) { + ERROR_MSG("Error i2c client for port %d", port); + } + i2c_smbus_write_byte_data(cpld_client, CPLD_MUX_REG ,data_reg); + + while (count) { + ssize_t status; + + status = sfp_eeprom_write(data->client, off, buf, count); + if (status <= 0) { + if (retval == 0) { + retval = status; + } + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + //CPLD MUX deselect + i2c_smbus_write_byte_data(cpld_client, CPLD_MUX_REG ,0x0); + + mutex_unlock(&data->update_lock); + return retval; +} + + +static ssize_t +sfp_bin_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct sfp_port_data *data; + struct platform_device_id *dev_id = NULL; + + dev_id = (struct platform_device_id *)attr->private; + + DEBUG_PRINT("offset = (%lld), count = (%ld) dev_port=%d", + off, count, (int)dev_id->driver_data); + data = dev_get_drvdata(container_of(kobj, struct device, kobj)); + + return sfp_port_write(data, buf, off, count, (int)dev_id->driver_data); +} + +static int +sfp_sysfs_eeprom_init(struct kobject *kobj, + struct bin_attribute *eeprom, + const struct platform_device_id *dev_id) +{ + int err; + + sysfs_bin_attr_init(eeprom); + eeprom->attr.name = dev_id->name; + eeprom->attr.mode = S_IWUSR | S_IRUGO; + eeprom->read = sfp_bin_read; + eeprom->write = sfp_bin_write; + eeprom->private = (void *)dev_id; + eeprom->size = EEPROM_SIZE; + + /* Create eeprom file */ + err = sysfs_create_bin_file(kobj, eeprom); + if (err) { + DEBUG_PRINT("err=%d", err); + return err; + } + + return 0; +} + +static int +sfp_sysfs_eeprom_cleanup(struct kobject *kobj, + struct bin_attribute *eeprom) +{ + sysfs_remove_bin_file(kobj, eeprom); + + return 0; +} + +static int +sfp_i2c_check_functionality(struct i2c_client *client) +{ +#if USE_I2C_BLOCK_READ + return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK); +#else + return i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA); +#endif +} + +static int +qsfp_probe(struct i2c_client *client, + const struct platform_device_id *dev_id, + struct qsfp_data **data) +{ + int status; + struct qsfp_data *qsfp; + + if (!sfp_i2c_check_functionality(client)) { + status = -EIO; + goto exit; + } + + qsfp = kzalloc(sizeof(struct qsfp_data), GFP_KERNEL); + if (!qsfp) { + status = -ENOMEM; + DEBUG_PRINT("No memory."); + goto exit; + } + + /* Register sysfs hooks */ //TBD: must remove + /* status = sysfs_create_group(&client->dev.kobj, &qsfp_group); + if (status) { + goto exit_free; + } */ + + /* init eeprom */ + status = sfp_sysfs_eeprom_init(&client->dev.kobj, &qsfp->eeprom.bin, dev_id); + if (status) { + DEBUG_PRINT("sfp_sysfs_eeprom_init error"); + goto exit_free; + } + + //TBD: Must remove + /*if (s9130_32x_kobj) { + status = sysfs_create_link(s9130_32x_kobj, &client->dev.kobj, client->name); + if (status) { + goto exit_remove; + } + }*/ + + *data = qsfp; + dev_info(&client->dev, "qsfp '%s'\n", client->name); + + return 0; + +exit_free: + kfree(qsfp); +exit: + + return status; +} + +static int +qsfp_device_probe(struct platform_device *pdev) +{ + struct sfp_platform_data *pdata; + struct sfp_port_data *data[TOTAL_PORT_NUM]; + struct i2c_adapter *parent[SFP_EEPROM_DEV_NUM]; + struct i2c_client *sfp_client[SFP_EEPROM_DEV_NUM]; + int i; + int ret=0; + + DEBUG_PRINT("Start"); + + pdata = pdev->dev.platform_data; + if (!pdata) { + ERROR_MSG("Missing platform data\n"); + return -ENODEV; + } + + //New eeprom device + for (i=0; i < SFP_EEPROM_DEV_NUM; i++) { + parent[i] = i2c_get_adapter(i+S8900_64XC_SFP_EEPROM_BASE_NR); + if (!parent[i]) { + ERROR_MSG("Parent adapter (%d) not found\n", i+S8900_64XC_SFP_EEPROM_BASE_NR); + ret=-ENODEV; + goto error; + } + sfp_client[i] = i2c_new_dummy(parent[i], SFP_EEPROM_A0_I2C_ADDR); + if (!sfp_client[i]) { + ERROR_MSG("[%d]: Fail to create dummy i2c client for parent %d addr 0x%x\n", i, i+S8900_64XC_SFP_EEPROM_BASE_NR, SFP_EEPROM_A0_I2C_ADDR); + ret=-ENODEV; + goto error; + } + } + + //Assign client to dummy device + for (i = 0; i < TOTAL_PORT_NUM; i++) { + switch (pdata[i].parent) { + case 2: + pdata[i].client = sfp_client[0]; + break; + case 3: + pdata[i].client = sfp_client[1]; + break; + case 4: + pdata[i].client = sfp_client[2]; + break; + default: + ERROR_MSG("Error parent number: %d, ", i); + break; + } + + if (!pdata[i].client) { + ERROR_MSG("[%d]: Fail to create dummy i2c client for parent %d addr 0x%x\n", i, pdata[i].parent, pdata[i].reg_addr); + ret=-ENODEV; + goto error; + } + } + + + for (i = 0; i < TOTAL_PORT_NUM; i++) { + data[i] = kzalloc(sizeof(struct sfp_port_data), GFP_KERNEL); + if (!data[i]) { + ret=-ENOMEM; + ERROR_MSG("No memory"); + goto error; + } + + i2c_set_clientdata(pdata[i].client, data[i]); + mutex_init(&data[i]->update_lock); + data[i]->port = qsfp_device_id[i].driver_data; + data[i]->client = pdata[i].client; + + DEBUG_PRINT("data[%d]->port=%d", i, data[i]->port); + + if (pdata[i].client->addr != SFP_EEPROM_A0_I2C_ADDR) { + ret=-ENODEV; + ERROR_MSG("Not approve device address"); + goto error; + } + + data[i]->driver_type = DRIVER_TYPE_QSFP; + + ret |= qsfp_probe(pdata[i].client, &qsfp_device_id[i], &data[i]->qsfp); + } + + if (ret) { + ERROR_MSG("qsfp_probe failed someone."); + //goto error; + } + return 0; +error: + DEBUG_PRINT("error start"); + i2c_put_adapter(parent[i]); + i--; + for (; i >= 0; i--) { + if (pdata[i].client) { + i2c_unregister_device(pdata[i].client); + i2c_put_adapter(parent[i]); + } + } + + return ret; +} + +static int +qsfp_remove(struct i2c_client *client, + struct qsfp_data *data) +{ + //TBD: Must remove + /*if (s9130_32x_kobj) { + sysfs_remove_link(s9130_32x_kobj, client->name); + }*/ + + //TBD: Must remove all ports EEPROM BIN + sfp_sysfs_eeprom_cleanup(&client->dev.kobj, &data->eeprom.bin); + //TBD: Must remove sysfs_remove_group(&client->dev.kobj, &qsfp_group); + kfree(data); + + return 0; +} + +static int __exit +qsfp_device_remove(struct platform_device *pdev) +{ + struct sfp_port_data *data = NULL; + struct sfp_platform_data *pdata = pdev->dev.platform_data; + struct i2c_adapter *parent = NULL; + int i; + + + + if (!pdata) { + ERROR_MSG("Missing platform data\n"); + return -ENOENT; + } + + for (i = 0; i < TOTAL_PORT_NUM; i+=CPLD_MUX_OFFSET) { + data = i2c_get_clientdata(pdata[i].client); + if (!data) { + ERROR_MSG("Empty data. skip. i=%d", i); + continue; + } + qsfp_remove(pdata[i].client, data->qsfp); + if (pdata[i].client) { + parent = (pdata[i].client)->adapter; + i2c_unregister_device(pdata[i].client); + i2c_put_adapter(parent); + } + kfree(data); + } + + + return 0; +} + +static int +cpld_probe(struct platform_device *pdev) +{ + struct cpld_platform_data *pdata; + struct i2c_adapter *parent[CPLD_DEVICE_NUM]; + int i; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + ERROR_MSG("Missing platform data\n"); + return -ENODEV; + } + + for (i = 0; i < CPLD_DEVICE_NUM; i++) { + parent[i] = i2c_get_adapter(S8900_64XC_MUX_BASE_NR + i + 1); + if (!parent[i]) { + ERROR_MSG("Parent adapter (%d) not found\n", + S8900_64XC_MUX_BASE_NR + i + 1); + return -ENODEV; + } + pdata[i].client = i2c_new_dummy(parent[i], pdata[i].reg_addr); + if (!pdata[i].client) { + ERROR_MSG("Fail to create dummy i2c client for addr %d\n", pdata[i].reg_addr); + goto error; + } + } + + ret = sysfs_create_group(&pdev->dev.kobj, &s8900_64xc_cpld_attr_grp); + if (ret) + goto error; + + return 0; + +error: + if (i < CPLD_DEVICE_NUM) { + i2c_put_adapter(parent[i]); + } + i--; + for (; i >= 0; i--) { + if (pdata[i].client) { + i2c_unregister_device(pdata[i].client); + i2c_put_adapter(parent[i]); + } + } + + return -ENODEV; +} + +static int __exit cpld_remove(struct platform_device *pdev) +{ + int i; + struct i2c_adapter *parent = NULL; + struct cpld_platform_data *pdata = pdev->dev.platform_data; + + sysfs_remove_group(&pdev->dev.kobj, &s8900_64xc_cpld_attr_grp); + + if (!pdata) { + ERROR_MSG("Missing platform data\n"); + } else { + for (i = 0; i < CPLD_DEVICE_NUM; i++) { + if (pdata[i].client) { + parent = (pdata[i].client)->adapter; + i2c_unregister_device(pdata[i].client); + i2c_put_adapter(parent); + } + } + } + + return 0; +} + +static struct platform_driver cpld_driver = { + .probe = cpld_probe, + .remove = __exit_p(cpld_remove), + .driver = { + .owner = THIS_MODULE, + .name = "ingrasys-s8900-64xc-cpld", + }, +}; + +static struct platform_driver qsfp_driver = { + .probe = qsfp_device_probe, + .remove = __exit_p(qsfp_device_remove), + //.id_table = qsfp_device_id, + .driver = { + .owner = THIS_MODULE, + .name = "ingrasys-s8900-64xc-sfp", + }, +}; + + +static int __init ingrasys_s8900_64xc_platform_init(void) +{ + int ret = 0; + + DEBUG_PRINT("ingrasysl_s8900_64xc_platform module initialization\n"); + + //mdelay(10000); + + ret = platform_driver_register(&cpld_driver); + if (ret) { + ERROR_MSG("Fail to register cpld driver\n"); + goto error_cpld_driver; + } + ret = platform_device_register(&s8900_64xc_cpld); + if (ret) { + ERROR_MSG("Fail to create cpld device\n"); + goto error_cpld; + } + + ret = platform_driver_register(&qsfp_driver); + if (ret) { + ERROR_MSG("Fail to register sfp driver\n"); + goto error_cpld_driver; + } + + ret = platform_device_register(&s8900_64xc_sfp); + if (ret) { + ERROR_MSG("Fail to create sfp device\n"); + goto error_cpld; + } + + return 0; + +error_cpld: + platform_driver_unregister(&cpld_driver); + platform_driver_unregister(&qsfp_driver); +error_cpld_driver: + return ret; +} + +static void __exit ingrasys_s8900_64xc_platform_exit(void) +{ + platform_device_unregister(&s8900_64xc_sfp); + platform_device_unregister(&s8900_64xc_cpld); + platform_driver_unregister(&qsfp_driver); + platform_driver_unregister(&cpld_driver); +} + +module_init(ingrasys_s8900_64xc_platform_init); +module_exit(ingrasys_s8900_64xc_platform_exit); + +MODULE_DESCRIPTION("Ingrasys S8900-64XC Platform Support"); +MODULE_AUTHOR("Wade He "); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/service/qsfp-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/service/qsfp-monitor.service new file mode 100644 index 000000000000..99c91b98ab52 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/service/qsfp-monitor.service @@ -0,0 +1,15 @@ +[Unit] +Description= This QSFP Monitor service is to setup QSFP SI. +Requires=s8900-64xc-monitor.service +After=s8900-64xc-monitor.service + +[Service] +ExecStart=/usr/sbin/qsfp_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/service/s8900-64xc-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/service/s8900-64xc-monitor.service new file mode 100644 index 000000000000..decb0f943a9d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/service/s8900-64xc-monitor.service @@ -0,0 +1,18 @@ +[Unit] +Description= This Platform Monitor service is to initialize platform and monitor platform. +Before=platform-monitor.service +After=sysinit.target +Wants=fancontrol.service +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/sbin/i2c_utils.sh i2c_init +ExecStart=/usr/sbin/s8900_64xc_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/i2c_utils.sh new file mode 100644 index 000000000000..cd33df48bd4f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/i2c_utils.sh @@ -0,0 +1,1157 @@ +#!/bin/bash + +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +EXEC_FUNC=${1} +COLOR_LED=${2} +QSFP_PORT=${2} +ONOFF_LED=${3} +FAN_TRAY=${4} + +############################################################ +# Distributor ID: Debian +# Description: Debian GNU/Linux 8.6 (jessie) +# Release: 8.6 +# Codename: jessie +# Linux debian 3.16.0-4-amd64 #1 +# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux +############################################################ + +# Color Definition +COLOR_TITLE="\e[1;32m" ### Green ### +COLOR_WARNING="\e[1;33m" ### Yellow ### +COLOR_ERROR="\e[1;31m" ### Red ### +COLOR_END="\e[0m" ### END ### + +NUM_IGB_DEVICE=0 +NUM_I801_DEVICE=0 +NUM_ISMT_DEVICE=$(( ${NUM_I801_DEVICE} + 1 )) +NUM_MUX1_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 2 )) +NUM_MUX1_CHAN1_DEVICE=$(( ${NUM_I801_DEVICE} + 3 )) +NUM_MUX1_CHAN2_DEVICE=$(( ${NUM_I801_DEVICE} + 4 )) +NUM_MUX1_CHAN3_DEVICE=$(( ${NUM_I801_DEVICE} + 5 )) +NUM_MUX1_CHAN4_DEVICE=$(( ${NUM_I801_DEVICE} + 6 )) +NUM_MUX1_CHAN5_DEVICE=$(( ${NUM_I801_DEVICE} + 7 )) +NUM_MUX1_CHAN6_DEVICE=$(( ${NUM_I801_DEVICE} + 8 )) +NUM_MUX1_CHAN7_DEVICE=$(( ${NUM_I801_DEVICE} + 9 )) + +PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" +PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon1" +PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_ISMT_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_ISMT_DEVICE}" +PATH_MUX_CHAN0_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN0_DEVICE}" +PATH_MUX_CHAN1_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN1_DEVICE}" +PATH_MUX_CHAN2_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN2_DEVICE}" +PATH_MUX_CHAN3_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN3_DEVICE}" +PATH_MUX_CHAN4_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN4_DEVICE}" +PATH_MUX_CHAN5_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN5_DEVICE}" +PATH_MUX_CHAN6_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN6_DEVICE}" +PATH_MUX_CHAN7_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN7_DEVICE}" + +#Power Supply Status +PSU_DC_ON=1 +PSU_DC_OFF=0 +PSU_EXIST=1 +PSU_NOT_EXIST=0 + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} i2c_init" + echo " : ${0} i2c_temp_init" + echo " : ${0} i2c_fan_init" + echo " : ${0} i2c_volmon_init" + echo " : ${0} i2c_io_exp_init" + echo " : ${0} i2c_led_test" + echo " : ${0} i2c_psu_eeprom_get" + echo " : ${0} i2c_mb_eeprom_get" + echo " : ${0} i2c_qsfp_eeprom_get [1-64]" + echo " : ${0} i2c_qsfp_status_get [1-64]" + echo " : ${0} i2c_qsfp_type_get [1-64]" + echo " : ${0} i2c_qsfp_abs_get [1-64]" + echo " : ${0} i2c_qsfp_rst_get [49-64]" + echo " : ${0} i2c_qsfp_lpmode_get [49-64]" + echo " : ${0} i2c_board_type_get" + echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_psu_status_set" + echo " : ${0} i2c_led_fan_status_set" + echo " : ${0} i2c_led_fan_tray_status_set" + echo " : ${0} i2c_cpld_version" + echo " : ${0} i2c_front_temp" + echo " : ${0} i2c_rear_temp" + echo " : ${0} i2c_test_all" + echo " : ${0} i2c_sys_led green|amber on|off" + echo " : ${0} i2c_fan_led green|amber on|off" + echo " : ${0} i2c_psu1_led green|amber on|off" + echo " : ${0} i2c_psu2_led green|amber on|off" + echo " : ${0} i2c_fan_tray_led green|amber on|off [1-5]" + echo "----------------------------------------------------" +} + +#Pause function +function _pause { + read -p "$*" +} + +#Retry command function +function _retry { + for i in {1..5}; + do + eval "${*}" && break || echo "retry"; sleep 1; + done +} + + +#I2C Init +function _i2c_init { + echo "=========================================================" + echo "# Description: I2C Init" + echo "=========================================================" + + rmmod i2c_ismt + rmmod i2c_i801 + modprobe i2c_i801 + modprobe i2c_ismt + modprobe i2c_dev + modprobe i2c_mux_pca954x force_deselect_on_exit=1 + + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x72' > ${PATH_ISMT_DEVICE}/new_device" + else + echo "pca9548 0x72 already init." + fi + #Init CPLD LED_CLR Register (Front Port LED) + i2cset -y ${NUM_I801_DEVICE} 0x33 0x34 0x10 + + rmmod coretemp + rmmod jc42 + rmmod w83795 + rmmod lm75 + _i2c_temp_init + _i2c_volmon_init + _i2c_hwmon_init + modprobe coretemp + modprobe w83795 + modprobe lm75 + modprobe jc42 + modprobe sff_8436_eeprom + modprobe eeprom + modprobe eeprom_mb + modprobe qsfp_cpld + _i2c_fan_init + _i2c_io_exp_init + _i2c_cpld_init + _i2c_psu_eeprom_init + _i2c_led_psu_status_set + _i2c_led_fan_status_set + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + + echo "tmp75 0x48" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN3_DEVICE}/new_device + echo "tmp75 0x49" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN3_DEVICE}/new_device + echo "Mount Main Board EEPROM" + echo "mb_eeprom 0x54" > /sys/bus/i2c/devices/i2c-7/new_device + + _config_rmem +} + +#I2C Deinit +function _i2c_deinit { + for mod in coretemp jc42 w83795 lm75 eeprom_mb i2c_mux_pca954x i2c_ismt i2c_i801; + do + [ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod + done +} + +#Temperature sensor Init +function _i2c_temp_init { + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x00 0x80 + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x05 0xFF + echo "TEMP INIT Done" +} + +#FAN Init +function _i2c_fan_init { + echo -n "FAN INIT..." + if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm1 + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm2 + echo "SUCCESS" + else + echo "FAIL" + fi + +} + +#VOLMON Init +function _i2c_volmon_init { + echo -n "VOLMON INIT..." + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x00 0x80 + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x02 0xFF + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x03 0x50 + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x04 0x0A + echo "Done" +} + +#HWMON Init +function _i2c_hwmon_init { + echo -n "HWMON INIT..." + i2cset -y ${NUM_I801_DEVICE} 0x2f 0x00 0x80 + i2cset -y ${NUM_I801_DEVICE} 0x2f 0x06 0xFF + i2cset -y ${NUM_I801_DEVICE} 0x2f 0x07 0x03 + echo "Done" +} + +#IO Expander Init +function _i2c_io_exp_init { + echo "=========================================================" + echo "# Description: I2C IO Expender Init" + echo "=========================================================" + #SMBUS0 IO_EXPENDER + i2cset -y -r ${NUM_I801_DEVICE} 0x27 4 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 5 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 2 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 3 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 6 0xFF + i2cset -y -r ${NUM_I801_DEVICE} 0x27 7 0xFF + + #LED board after PVT (S8900_IO_EXP_LED_ID) + echo "Init LED IO Expender" + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 7 0xFF + + #PSU I/O (S8900_IO_EXP_PSU_ID) + echo "Init PSU IO Expender" + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 2 0x44 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 6 0xBB + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 7 0xFF + + #FAN I/O (S8900_IO_EXP_FAN_ID) + echo "Init FAN1 IO Expender" + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x20 2 0x11 + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x20 3 0x11 + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x20 6 0xCC + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x20 7 0xCC + + #FAN I/O (S8900_IO_EXP_FAN_ID) + echo "Init FAN2 IO Expender" + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x21 2 0x10 + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x21 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x21 6 0xCC + i2cset -y -r ${NUM_MUX1_CHAN3_DEVICE} 0x21 7 0xFF +} + +#I2C CPLD init +function _i2c_cpld_init { + echo "=========================================================" + echo "# Description: I2C CPLD Init..." + echo "=========================================================" + + ## modprobe i2c_cpld + modprobe i2c_cpld + ## Add CPLD device + echo "i2c_cpld 0x33" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}/new_device + + echo "done..." +} +#Set FAN Tray LED +function _i2c_led_fan_tray_status_set { + echo "FAN Tray Status Setup" + #FAN Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + FAN9_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan9_alarm` + FAN10_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan10_alarm` + + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ]; then + FAN_TRAY=1 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=1 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + if [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ]; then + FAN_TRAY=2 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=2 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + if [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ]; then + FAN_TRAY=3 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=3 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + if [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + FAN_TRAY=4 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=4 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + if [ "${FAN9_ALARM}" == "0" ] && [ "${FAN10_ALARM}" == "0" ]; then + FAN_TRAY=5 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=5 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi +} + +#Set FAN LED +function _i2c_led_fan_status_set { + echo "FAN Status Setup" + #PSU Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + FAN9_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan9_alarm` + FAN10_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan10_alarm` + + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ] \ + && [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ] \ + && [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ] \ + && [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ] \ + && [ "${FAN9_ALARM}" == "0" ] && [ "${FAN10_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + fi +} + +#Set Power Supply LED +function _i2c_led_psu_status_set { + echo "PSU LED Status Setup" + + #PSU Status set + _i2c_psu_status + + #PSU1 Status + if [ "${psu1Exist}" == ${PSU_EXIST} ]; then + if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + + #PSU2 Status + if [ "${psu2Exist}" == ${PSU_EXIST} ]; then + if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi +} + +#LED Test +function _i2c_led_test { + echo "=========================================================" + echo "# Description: I2C LED TEST..." + echo "=========================================================" + #sys led (green) + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xBF + _pause 'Check SYS LED green light and Press [Enter] key to continue...' + #sys led (amber) + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0x7F + _pause 'Check SYS LED amber light and Press [Enter] key to continue...' + + #FAN led (green) + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xEF + _pause 'Check FAN LED green light and Press [Enter] key to continue...' + #FAN led (amber) + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xDF + _pause 'Check FAN LED amber light and Press [Enter] key to continue...' + + #PSU2 led (green) + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFB + _pause 'Check PSU2 LED green light and Press [Enter] key to continue...' + #PSU2 led (amber) + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xF7 + _pause 'Check PSU2 LED amber light and Press [Enter] key to continue...' + + #PSU1 led (green) + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFE + _pause 'Check PSU1 LED green light and Press [Enter] key to continue...' + #PSU1 led (amber) + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFD + _pause 'Check PSU1 LED amber light and Press [Enter] key to continue...' + + #Turn OFF All LED + i2cset -y ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + _pause 'Check turn off all LEDs and Press [Enter] key to continue...' + echo "done..." +} + +#Set QSFP Port variable +function _qsfp_port_i2c_var_set { + local port=$1 + case ${port} in + 1|2|3|4|5|6|7|8) + i2cbus=${NUM_MUX1_CHAN0_DEVICE} + regAddr=0x33 + idx=$(( ((${port} - 1) / 2) )) + dataAddr=$(( (32 + $idx) )) + presentChan=$(( $((${port} % 2)) == 1 ? 0x1 : 0x5 )) + eeprombus=${NUM_MUX1_CHAN0_DEVICE} + eepromidx=${port} + eepromAddr=0x50 + ;; + 9|10|11|12|13|14|15|16) + i2cbus=${NUM_MUX1_CHAN0_DEVICE} + regAddr=0x33 + idx=$(( ((${port} - 1) / 2) )) + dataAddr=$(( (32 + $idx) )) + presentChan=$(( $((${port} % 2)) == 1 ? 0x1 : 0x5 )) + eeprombus=${NUM_MUX1_CHAN0_DEVICE} + eepromidx=${port} + eepromAddr=0x50 + ;; + 17|18|19|20) + i2cbus=${NUM_MUX1_CHAN0_DEVICE} + regAddr=0x33 + idx=$(( ((${port} - 1) / 2) )) + dataAddr=$(( (32 + $idx) )) + presentChan=$(( $((${port} % 2)) == 1 ? 0x1 : 0x5 )) + eeprombus=${NUM_MUX1_CHAN0_DEVICE} + eepromidx=${port} + eepromAddr=0x50 + ;; + 21|22|23|24) + i2cbus=${NUM_MUX1_CHAN0_DEVICE} + regAddr=0x33 + idx=$(( ((${port} - 1) / 2) )) + dataAddr=$(( (38 + $idx) )) + presentChan=$(( $((${port} % 2)) == 1 ? 0x1 : 0x5 )) + eeprombus=${NUM_MUX1_CHAN0_DEVICE} + eepromidx=${port} + eepromAddr=0x50 + ;; + 25|26|27|28|29|30|31|32) + i2cbus=${NUM_MUX1_CHAN1_DEVICE} + regAddr=0x33 + idx=$(( ((${port} - 25) / 2) )) + dataAddr=$(( (32 + $idx) )) + presentChan=$(( $((${port} % 2)) == 1 ? 0x1 : 0x5 )) + eeprombus=${NUM_MUX1_CHAN1_DEVICE} + eepromidx=$(( (${port} - 24) )) + eepromAddr=0x50 + ;; + 33|34|35|36|37|38|39|40) + i2cbus=${NUM_MUX1_CHAN1_DEVICE} + regAddr=0x33 + idx=$(( ((${port} - 25) / 2) )) + dataAddr=$(( (32 + $idx) )) + presentChan=$(( $((${port} % 2)) == 1 ? 0x1 : 0x5 )) + eeprombus=${NUM_MUX1_CHAN1_DEVICE} + eepromidx=$(( (${port} - 24) )) + eepromAddr=0x50 + ;; + 41|42|43|44) + i2cbus=${NUM_MUX1_CHAN1_DEVICE} + regAddr=0x33 + idx=$(( ((${port} - 25) / 2) )) + dataAddr=$(( (32 + $idx) )) + presentChan=$(( $((${port} % 2)) == 1 ? 0x1 : 0x5 )) + eeprombus=${NUM_MUX1_CHAN1_DEVICE} + eepromidx=$(( (${port} - 24) )) + eepromAddr=0x50 + ;; + 45|46|47|48) + i2cbus=${NUM_MUX1_CHAN1_DEVICE} + regAddr=0x33 + idx=$(( ((${port} - 25) / 2) )) + dataAddr=$(( (38 + $idx) )) + presentChan=$(( $((${port} % 2)) == 1 ? 0x1 : 0x5 )) + eeprombus=${NUM_MUX1_CHAN1_DEVICE} + eepromidx=$(( (${port} - 24) )) + eepromAddr=0x50 + ;; + 49|50|51|52|53|54|55|56) + i2cbus=${NUM_MUX1_CHAN2_DEVICE} + regAddr=0x33 + idx=$(( (${port} - 49) )) + dataAddr=$(( (32 + $idx) )) + rstsellpdataAddr=$(( (48 + $idx) )) + intChan=0x0 + rstChan=0x0 + presentChan=0x1 + modselChan=0x1 + lpmodeChan=0x2 + eeprombus=${NUM_MUX1_CHAN2_DEVICE} + eepromidx=$(( (${port} - 48) )) + intabsidx=$(( (${port} - 28) )) + rstsellpidx=$(( (${port} - 18) )) + eepromAddr=0x50 + ;; + 57|58|59|60|61|62|63|64) + i2cbus=${NUM_MUX1_CHAN2_DEVICE} + regAddr=0x33 + idx=$(( (${port} - 49) )) + dataAddr=$(( (32 + $idx) )) + rstsellpdataAddr=$(( (48 + $idx) )) + intChan=0x0 + rstChan=0x0 + presentChan=0x1 + modselChan=0x1 + lpmodeChan=0x2 + eeprombus=${NUM_MUX1_CHAN2_DEVICE} + eepromidx=$(( (${port} - 48) )) + intabsidx=$(( (${port} - 28) )) + rstsellpidx=$(( (${port} - 18) )) + eepromAddr=0x50 + ;; + *) + echo "Please input 1~64" + exit + ;; + esac +} + +#Get SFP/QSFP EEPROM Information +function _i2c_qsfp_eeprom_get { + _qsfp_port_i2c_var_set ${QSFP_PORT} + + regData=`cat /sys/devices/platform/ingrasys-s8900-64xc-cpld.0/qsfp_modprs` + port_num=$(( ${QSFP_PORT} - 1 )) + + #status: 0 -> Down, 1 -> Up + status=$(( $(($regData & ( 1 << $port_num))) != 0 ? 0 : 1 )) + + + if [ $status = 0 ]; then + echo "Module not present." + exit + fi + + #Read SFP/QSFP EEPROM + if [ ${QSFP_PORT} -lt 49 ]; then + cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/sfp${QSFP_PORT} | hexdump -C + elif [ ${QSFP_PORT} -ge 49 ]; then + cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/qsfp${QSFP_PORT} | hexdump -C + fi +} + +#Get QSFP Status for QSFP monitor service +function _i2c_qsfp_status_get { + _i2c_qsfp_abs_get + echo "status=$status" +} + +#Get QSFP type for QSFP monitor server +function _i2c_qsfp_type_get { + _qsfp_port_i2c_var_set ${QSFP_PORT} + + regData=`cat /sys/devices/platform/ingrasys-s8900-64xc-cpld.0/qsfp_modprs` + port_num=$(( ${QSFP_PORT} - 1 )) + + #status: 0 -> Down, 1 -> Up + status=$(( $(($regData & ( 1 << $port_num))) != 0 ? 0 : 1 )) + + if [ $status = 0 ]; then + echo "Module not present." + exit + fi + + #Read SFP/QSFP EEPROM + if [ ${QSFP_PORT} -lt 49 ]; then + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/sfp${QSFP_PORT}) + elif [ ${QSFP_PORT} -ge 49 ]; then + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/qsfp${QSFP_PORT}) + fi + + if [ ${QSFP_PORT} -ge 1 ] && [ ${QSFP_PORT} -le 48 ]; then + echo "sfp" + # 1~48 port is sfp port + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 0 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 2 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 3 -n 1 -e '"%x"') + else + echo "qsfp" + # 49~64 port is qsfp port + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + fi + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +#Get QSFP ABS +function _i2c_qsfp_abs_get { + _qsfp_port_i2c_var_set ${QSFP_PORT} + + regData=`cat /sys/devices/platform/ingrasys-s8900-64xc-cpld.0/qsfp_modprs` + port_num=$(( ${QSFP_PORT} - 1 )) + + #status: 0 -> Down, 1 -> Up + status=$(( $(($regData & ( 1 << $port_num))) != 0 ? 0 : 1 )) + echo "ABS=$status regData=$regData" + + +} + +#Get QSFP RST +function _i2c_qsfp_rst_get { + + if [ ${QSFP_PORT} -lt 49 ] || [ ${QSFP_PORT} -gt 64 ]; then + echo "Please input 49~64" + exit + fi + _qsfp_port_i2c_var_set ${QSFP_PORT} + + + regData=`cat /sys/devices/platform/ingrasys-s8900-64xc-cpld.0/qsfp_reset` + port_num=$(( ${QSFP_PORT} - 49 )) + + #status: 0 -> Down, 1 -> Up + status=$(( $(($regData & ( 1 << $port_num))) != 0 ? 0 : 1 )) + echo "RST=$status regData=$regData" + +} + +#Get QSFP LPMODE +function _i2c_qsfp_lpmode_get { + + if [ ${QSFP_PORT} -lt 49 ] || [ ${QSFP_PORT} -gt 64 ]; then + echo "Please input 49~64" + exit + fi + _qsfp_port_i2c_var_set ${QSFP_PORT} + + + regData=`cat /sys/devices/platform/ingrasys-s8900-64xc-cpld.0/qsfp_lpmode` + port_num=$(( ${QSFP_PORT} - 49 )) + + #status: 0 -> Down, 1 -> Up + status=$(( $(($regData & ( 1 << $port_num))) != 0 ? 1 : 0 )) + echo "LPMODE=$status regData=$regData" + +} +#PSU EEPROM init +function _i2c_psu_eeprom_init { + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Init..." + echo "=========================================================" + + ## modprobe eeprom + modprobe eeprom + ## PUS(0) EEPROM + echo "eeprom 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN6_DEVICE}/new_device + + ## PUS(1) EEPROM + echo "eeprom 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN7_DEVICE}/new_device + + echo "done..." +} + +#Get PSU EEPROM Information +function _i2c_psu_eeprom_get { + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Get..." + echo "=========================================================" + + ## modprobe eeprom + modprobe eeprom + ## PUS(0) EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_MUX1_CHAN6_DEVICE}-0050/eeprom | hexdump -C + + ## PUS(1) EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_MUX1_CHAN7_DEVICE}-0050/eeprom | hexdump -C + echo "done..." +} + +#Get MotherBoard EEPROM Information +function _i2c_mb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get..." + echo "=========================================================" + + ## modprobe eeprom + modprobe eeprom_mb + + ## MB EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_MUX1_CHAN5_DEVICE}-0054/eeprom | hexdump -C + echo "done..." +} + +#Set System Status LED +function _i2c_sys_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x40 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x40 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x80 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x80 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set PSU2 LED +function _i2c_psu2_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x04 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x04 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x08 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x08 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set FAN Tray LED +function _i2c_fan_tray_led { + + case ${FAN_TRAY} in + 1) + i2cAddr=0x20 + ioPort=2 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 2) + i2cAddr=0x20 + ioPort=2 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + 3) + i2cAddr=0x20 + ioPort=3 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 4) + i2cAddr=0x20 + ioPort=3 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + 5) + i2cAddr=0x21 + ioPort=2 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + *) + echo "Please input 1~5" + exit + ;; + esac + + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m $mask -y -r ${NUM_MUX1_CHAN3_DEVICE} $i2cAddr $ioPort 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_MUX1_CHAN3_DEVICE} $i2cAddr $ioPort 0x33 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m $mask -y -r ${NUM_MUX1_CHAN3_DEVICE} $i2cAddr $ioPort 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_MUX1_CHAN3_DEVICE} $i2cAddr $ioPort 0x33 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set FAN LED +function _i2c_fan_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x10 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x10 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x20 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x20 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set PSU1 LED +function _i2c_psu1_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x01 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x01 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x02 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x02 -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Get Board Version and Type +function _i2c_board_type_get { + boardType=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_board_type` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "BOARD_ID is 0x%02x, HW Rev %d, Build Rev %d\n" $boardId $boardHwRev $boardBuildRev + +} + +#Get CPLD Version +function _i2c_cpld_version { + cpldRev=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_version` + cpldRelease=$((($cpldRev) >> 6 & 0x01)) + cpldVersion=$((($cpldRev) & 0x3F)) + printf "CPLD is %s version(0:RD 1:Release), Revision is 0x%02x\n" $cpldRelease $cpldVersion + +} + +#Get PSU Status +function _i2c_psu_status { + psuPresent=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_pw_abs` + psu1Exist=$(($((($psuPresent) & 0x01))?0:1)) + psu2Exist=$(($((($psuPresent) & 0x02))?0:1)) + psuPwGood=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_pw_good` + psu1PwGood=$(($((($psuPwGood) >> 2 & 0x01))?1:0)) + psu2PwGood=$(($((($psuPwGood) >> 2 & 0x02))?1:0)) + printf "PSU1 Exist:%d PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood + printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood +} + +#Get Front Sensor Temperature +function _i2c_front_temp { + #Front MAC + sensors | grep 'Front MAC Temp' -A 1 +} + +#Get Rear Sensor Temperature +function _i2c_rear_temp { + #Rear MAC + sensors | grep 'Rear MAC Temp' -A 1 +} + +#Increase read socket buffer for CoPP Test +function _config_rmem { + echo "109430400" > /proc/sys/net/core/rmem_max +} + +#Main Function +function _main { + tart_time_str=`date` + start_time_sec=$(date +%s) + + if [ "${EXEC_FUNC}" == "help" ]; then + _help + elif [ "${EXEC_FUNC}" == "i2c_init" ]; then + _i2c_init + elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then + _i2c_deinit + elif [ "${EXEC_FUNC}" == "i2c_temp_init" ]; then + _i2c_temp_init + elif [ "${EXEC_FUNC}" == "i2c_fan_init" ]; then + _i2c_fan_init + elif [ "${EXEC_FUNC}" == "i2c_volmon_init" ]; then + _i2c_volmon_init + elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then + _i2c_io_exp_init + elif [ "${EXEC_FUNC}" == "i2c_led_test" ]; then + _i2c_led_test + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then + _i2c_mb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then + _i2c_psu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then + _i2c_qsfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then + _i2c_qsfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then + _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_abs_get" ]; then + _i2c_qsfp_abs_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_rst_get" ]; then + _i2c_qsfp_rst_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_lpmode_get" ]; then + _i2c_qsfp_lpmode_get + elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then + _i2c_led_psu_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then + _i2c_led_fan_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then + _i2c_led_fan_tray_status_set + elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then + _i2c_sys_led + elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then + _i2c_fan_led + elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then + _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then + _i2c_psu1_led + elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then + _i2c_psu2_led + elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then + _i2c_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_cpld_version" ]; then + _i2c_cpld_version + elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_front_temp" ]; then + _i2c_front_temp + elif [ "${EXEC_FUNC}" == "i2c_rear_temp" ]; then + _i2c_rear_temp + elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then + _i2c_init + _i2c_temp_init + _i2c_fan_init + _i2c_io_exp_init + _i2c_led_test + _i2c_psu_eeprom_get + _i2c_mb_eeprom_get + _i2c_board_type_get + _i2c_cpld_version + _i2c_psu_status + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" + + echo "done!!!" +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/qsfp_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/qsfp_monitor.sh new file mode 100644 index 000000000000..36f9e53ef108 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/qsfp_monitor.sh @@ -0,0 +1,106 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=3 +I2C_UTILS="/usr/sbin/i2c_utils.sh" +QSFP_SI_SCRIPT="/usr/sbin/qsfp_si_cfg.sh" +QSFP_ARRAY=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0) + +#QSFP SI monitor +function _qsfp_si_monitor { + local i + local status + for i in {0..63}; + do + status=`${I2C_UTILS} i2c_qsfp_status_get $(expr $i + 1) | egrep '^status=.*$' | sed -e 's/status=//g'` + if [ "${status}" == "1" ]; then + _qsfp_type_check $i + fi + done +} + +#QSFP type +function _qsfp_type_check { + local port=$1 + local qsfp_type=`${I2C_UTILS} i2c_qsfp_type_get $(expr $port + 1)` + local identifier=`echo "$qsfp_type" | grep '^identifier=.*$' | sed -e 's/identifier=//g'` + # identifier 11 for qsfp, 3 for sfp + if [ "${identifier}" == "11" ] || [ "${identifier}" == "3" ]; then + connector=`echo "$qsfp_type" | grep '^connector=.*$' | sed -e 's/connector=//g'` + case ${connector} in + 21|23) + #DAC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to DAC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} dac $port >/dev/null + fi + ;; + *) + #AOC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to AOC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} aoc $port >/dev/null + fi + ;; + esac + fi +} + +#Docker exist check +function _docker_swss_check { + while true + do + # Check if syncd starts + result=`docker exec -i swss bash -c "echo -en \"SELECT 1\\nHLEN HIDDEN\" | redis-cli | sed -n 2p"` #TBD FIX ME + if [ "$result" == "3" ]; then + return + fi + sleep $INTERVAL + done +} + +#Docker exist check +function _qsfp_si_cfg_script_check { + + if [ -f ${QSFP_SI_SCRIPT} ] && [ -x ${QSFP_SI_SCRIPT} ]; then + echo "SI Script exists. Start monitor." + return + else + echo "SI Script not exist. Exit monitor." + exit + fi +} + +# main function +function _main { + #Check SI Script + _qsfp_si_cfg_script_check + #Check docker swss is running + _docker_swss_check + while true + do + _qsfp_si_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/qsfp_si_cfg.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/qsfp_si_cfg.sh new file mode 100644 index 000000000000..3d132641f516 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/qsfp_si_cfg.sh @@ -0,0 +1,409 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +TYPE=${1} +PORT=${2} + +# port number +MIN_PORT=0 +MAX_PORT=63 + +# INDEX of value field in array +SI_PRE_IDX=1 +SI_POST_IDX=2 +SI_MAIN_IDX=3 +SI_AMP_IDX=4 +SI_DRI_IDX=5 + +# type string +AOC_TYPE="aoc" +DAC_TYPE="dac" + +# si value for bcm command +SI_VAL="" + +# "PRE POST MAIN AMP DRIVERMODE" for each port in array +xe_aoc_si_value=( + "0x00 0x30 0x40 0x9 0x0" #port 0 + "0x00 0x30 0x40 0x9 0x0" #port 1 + "0x00 0x30 0x40 0x9 0x0" #port 2 + "0x00 0x2c 0x44 0x9 0x0" #port 3 + "0x00 0x30 0x40 0x9 0x0" #port 4 + "0x00 0x30 0x40 0x9 0x0" #port 5 + "0x00 0x2c 0x44 0x9 0x0" #port 6 + "0x00 0x2c 0x44 0x9 0x0" #port 7 + "0x00 0x2c 0x44 0x9 0x0" #port 8 + "0x00 0x28 0x48 0x9 0x0" #port 9 + "0x00 0x2c 0x44 0x9 0x0" #port 10 + "0x00 0x2c 0x44 0x9 0x0" #port 11 + "0x00 0x2c 0x44 0x9 0x0" #port 12 + "0x00 0x2c 0x44 0x9 0x0" #port 13 + "0x00 0x2c 0x44 0x9 0x0" #port 14 + "0x00 0x2c 0x44 0x9 0x0" #port 15 + "0x00 0x2c 0x44 0xb 0x0" #port 16 + "0x00 0x30 0x40 0xb 0x0" #port 17 + "0x00 0x2c 0x44 0xa 0x0" #port 18 + "0x00 0x2c 0x44 0x9 0x0" #port 19 + "0x00 0x30 0x40 0xa 0x0" #port 20 + "0x00 0x2c 0x44 0x9 0x0" #port 21 + "0x00 0x2c 0x44 0x9 0x0" #port 22 + "0x00 0x30 0x40 0xc 0x0" #port 23 + "0x00 0x30 0x40 0xc 0x0" #port 24 + "0x00 0x2c 0x44 0x9 0x0" #port 25 + "0x00 0x30 0x40 0x9 0x0" #port 26 + "0x00 0x30 0x40 0x9 0x0" #port 27 + "0x00 0x30 0x40 0xa 0x0" #port 28 + "0x00 0x28 0x48 0x9 0x0" #port 29 + "0x00 0x2c 0x44 0x9 0x0" #port 30 + "0x00 0x2c 0x44 0xa 0x0" #port 31 + "0x00 0x28 0x48 0x9 0x0" #port 32 + "0x00 0x28 0x48 0x7 0x0" #port 33 + "0x00 0x28 0x48 0x9 0x0" #port 34 + "0x00 0x28 0x48 0x9 0x0" #port 35 + "0x00 0x28 0x48 0x9 0x0" #port 36 + "0x00 0x2c 0x44 0x9 0x0" #port 37 + "0x00 0x28 0x48 0x9 0x0" #port 38 + "0x00 0x28 0x48 0x9 0x0" #port 39 + "0x00 0x28 0x48 0xa 0x0" #port 40 + "0x00 0x2c 0x44 0x9 0x0" #port 41 + "0x00 0x2c 0x44 0x9 0x0" #port 42 + "0x00 0x2e 0x42 0xa 0x0" #port 43 + "0x00 0x2e 0x42 0xa 0x0" #port 44 + "0x00 0x2c 0x44 0xa 0x0" #port 45 + "0x00 0x2c 0x44 0x9 0x0" #port 46 + "0x00 0x2c 0x44 0x9 0x0" #port 47 +) + +ce_aoc_si_value=( + "0x00 0x2c 0x44 0x9 0x0" #port 0 lane 0 + "0x00 0x34 0x3c 0xf 0x0" #port 0 lane 1 + "0x00 0x2c 0x44 0x9 0x0" #port 0 lane 2 + "0x00 0x2c 0x44 0x9 0x0" #port 0 lane 3 + "0x00 0x28 0x48 0x9 0x0" #port 1 lane 0 + "0x00 0x28 0x48 0x9 0x0" #port 1 lane 1 + "0x00 0x2c 0x44 0x9 0x0" #port 1 lane 2 + "0x00 0x2c 0x44 0xe 0x0" #port 1 lane 3 + "0x00 0x28 0x48 0x9 0x0" #port 2 lane 0 + "0x00 0x34 0x3c 0xf 0x0" #port 2 lane 1 + "0x00 0x28 0x48 0x9 0x0" #port 2 lane 2 + "0x00 0x30 0x40 0xd 0x0" #port 2 lane 3 + "0x00 0x2c 0x44 0x9 0x0" #port 3 lane 0 + "0x00 0x30 0x40 0xd 0x0" #port 3 lane 1 + "0x00 0x2c 0x44 0x9 0x0" #port 3 lane 2 + "0x00 0x30 0x40 0xd 0x0" #port 3 lane 3 + "0x00 0x2c 0x44 0x9 0x0" #port 4 lane 0 + "0x00 0x2c 0x44 0x9 0x0" #port 4 lane 1 + "0x00 0x2c 0x44 0x9 0x0" #port 4 lane 2 + "0x00 0x30 0x40 0xd 0x0" #port 4 lane 3 + "0x00 0x2c 0x44 0x9 0x0" #port 5 lane 0 + "0x00 0x38 0x38 0xf 0x0" #port 5 lane 1 + "0x00 0x2c 0x44 0x9 0x0" #port 5 lane 2 + "0x00 0x2c 0x44 0x9 0x0" #port 5 lane 3 + "0x00 0x2c 0x44 0x9 0x0" #port 6 lane 0 + "0x00 0x2c 0x44 0x9 0x0" #port 6 lane 1 + "0x00 0x2c 0x44 0x9 0x0" #port 6 lane 2 + "0x00 0x30 0x40 0xe 0x0" #port 6 lane 3 + "0x00 0x28 0x48 0x9 0x0" #port 7 lane 0 + "0x00 0x30 0x40 0xa 0x0" #port 7 lane 1 + "0x00 0x2c 0x44 0x9 0x0" #port 7 lane 2 + "0x00 0x34 0x3c 0xe 0x0" #port 7 lane 3 + "0x00 0x2c 0x44 0x9 0x0" #port 8 lane 0 + "0x00 0x30 0x40 0xe 0x0" #port 8 lane 1 + "0x00 0x34 0x3c 0xf 0x0" #port 8 lane 2 + "0x00 0x30 0x40 0xe 0x0" #port 8 lane 3 + "0x00 0x2c 0x44 0x9 0x0" #port 9 lane 0 + "0x00 0x34 0x3c 0xd 0x0" #port 9 lane 1 + "0x00 0x34 0x3c 0xd 0x0" #port 9 lane 2 + "0x00 0x34 0x3c 0xf 0x0" #port 9 lane 3 + "0x00 0x34 0x3c 0xd 0x0" #port 10 lane 0 + "0x00 0x34 0x3c 0xe 0x0" #port 10 lane 1 + "0x00 0x34 0x3c 0xd 0x0" #port 10 lane 2 + "0x00 0x34 0x3c 0xd 0x0" #port 10 lane 3 + "0x00 0x34 0x3c 0xd 0x0" #port 11 lane 0 + "0x00 0x34 0x3c 0xd 0x0" #port 11 lane 1 + "0x00 0x30 0x40 0xd 0x0" #port 11 lane 2 + "0x00 0x30 0x40 0xd 0x0" #port 11 lane 3 + "0x00 0x34 0x3c 0xd 0x0" #port 12 lane 0 + "0x00 0x34 0x3c 0xd 0x0" #port 12 lane 1 + "0x00 0x34 0x3c 0xd 0x0" #port 12 lane 2 + "0x00 0x34 0x3c 0xd 0x0" #port 12 lane 3 + "0x00 0x34 0x3c 0xd 0x0" #port 13 lane 0 + "0x00 0x34 0x3c 0xd 0x0" #port 13 lane 1 + "0x00 0x34 0x3c 0xd 0x0" #port 13 lane 2 + "0x00 0x34 0x3c 0xf 0x0" #port 13 lane 3 + "0x00 0x38 0x38 0xe 0x0" #port 14 lane 0 + "0x00 0x34 0x3c 0xd 0x0" #port 14 lane 1 + "0x00 0x34 0x3c 0xd 0x0" #port 14 lane 2 + "0x00 0x38 0x38 0xe 0x0" #port 14 lane 3 + "0x00 0x34 0x3c 0xd 0x0" #port 15 lane 0 + "0x00 0x30 0x40 0xc 0x0" #port 15 lane 1 + "0x00 0x30 0x40 0xc 0x0" #port 15 lane 2 + "0x00 0x34 0x3c 0xd 0x0" #port 15 lane 3 +) + +xe_dac_si_value=( + "0x14 0x00 0x3c 0xf 0x0" #port 0 + "0x1c 0x00 0x3c 0xf 0x0" #port 1 + "0x08 0x00 0x3c 0xf 0x0" #port 2 + "0x08 0x00 0x3c 0xf 0x0" #port 3 + "0x08 0x00 0x3c 0xf 0x0" #port 4 + "0x10 0x00 0x3c 0xf 0x0" #port 5 + "0x08 0x08 0x3c 0xf 0x0" #port 6 + "0x10 0x04 0x3c 0xf 0x0" #port 7 + "0x08 0x00 0x3c 0x9 0x0" #port 8 + "0x08 0x00 0x3c 0x9 0x0" #port 9 + "0x08 0x00 0x3c 0x9 0x0" #port 10 + "0x08 0x00 0x3c 0x9 0x0" #port 11 + "0x08 0x00 0x3c 0x9 0x0" #port 12 + "0x08 0x00 0x3c 0x9 0x0" #port 13 + "0x08 0x00 0x3c 0x9 0x0" #port 14 + "0x08 0x00 0x3c 0x9 0x0" #port 15 + "0x08 0x0c 0x3c 0xb 0x0" #port 16 + "0x10 0x0c 0x3c 0xb 0x0" #port 17 + "0x08 0x08 0x3c 0xa 0x0" #port 18 + "0x10 0x0c 0x3c 0x9 0x0" #port 19 + "0x08 0x04 0x3c 0xc 0x0" #port 20 + "0x08 0x08 0x3c 0x9 0x0" #port 21 + "0x08 0x08 0x3c 0xc 0x0" #port 22 + "0x10 0x08 0x3c 0xa 0x0" #port 23 + "0x08 0x08 0x3c 0x9 0x0" #port 24 + "0x08 0x04 0x3c 0x9 0x0" #port 25 + "0x08 0x00 0x3c 0x9 0x0" #port 26 + "0x08 0x08 0x3c 0xc 0x0" #port 27 + "0x10 0x00 0x3c 0xa 0x0" #port 28 + "0x10 0x04 0x3c 0x9 0x0" #port 29 + "0x14 0x00 0x3c 0x9 0x0" #port 30 + "0x14 0x00 0x3c 0xa 0x0" #port 31 + "0x08 0x00 0x3c 0x9 0x0" #port 32 + "0x08 0x00 0x3c 0x7 0x0" #port 33 + "0x08 0x00 0x3c 0x9 0x0" #port 34 + "0x08 0x00 0x3c 0x9 0x0" #port 35 + "0x08 0x00 0x3c 0x9 0x0" #port 36 + "0x0c 0x00 0x3c 0x9 0x0" #port 37 + "0x08 0x00 0x3c 0x9 0x0" #port 38 + "0x08 0x00 0x3c 0x9 0x0" #port 39 + "0x10 0x00 0x3c 0xa 0x0" #port 40 + "0x10 0x00 0x3c 0x9 0x0" #port 41 + "0x08 0x08 0x3c 0xc 0x0" #port 42 + "0x10 0x00 0x3c 0xa 0x0" #port 43 + "0x08 0x00 0x3c 0xa 0x0" #port 44 + "0x10 0x00 0x3c 0x9 0x0" #port 45 + "0x08 0x04 0x3c 0x9 0x0" #port 46 + "0x08 0x00 0x3c 0xa 0x0" #port 47 +) + +ce_dac_si_value=( + "0x08 0x00 0x3c 0x9 0x0" #port 0 lane 0 + "0x08 0x00 0x3c 0xf 0x0" #port 0 lane 1 + "0x08 0x00 0x3c 0x9 0x0" #port 0 lane 2 + "0x08 0x00 0x3c 0x9 0x0" #port 0 lane 3 + "0x08 0x00 0x3c 0x9 0x0" #port 1 lane 0 + "0x08 0x00 0x3c 0x9 0x0" #port 1 lane 1 + "0x08 0x00 0x3c 0x9 0x0" #port 1 lane 2 + "0x08 0x00 0x3c 0xe 0x0" #port 1 lane 3 + "0x08 0x00 0x3c 0x9 0x0" #port 2 lane 0 + "0x08 0x00 0x3c 0xf 0x0" #port 2 lane 1 + "0x08 0x00 0x3c 0x9 0x0" #port 2 lane 2 + "0x08 0x00 0x3c 0xd 0x0" #port 2 lane 3 + "0x08 0x00 0x3c 0x9 0x0" #port 3 lane 0 + "0x08 0x00 0x3c 0xd 0x0" #port 3 lane 1 + "0x08 0x00 0x3c 0x9 0x0" #port 3 lane 2 + "0x08 0x00 0x3c 0xd 0x0" #port 3 lane 3 + "0x08 0x00 0x3c 0x9 0x0" #port 4 lane 0 + "0x08 0x00 0x3c 0x9 0x0" #port 4 lane 1 + "0x08 0x00 0x3c 0x9 0x0" #port 4 lane 2 + "0x08 0x00 0x3c 0xd 0x0" #port 4 lane 3 + "0x08 0x00 0x3c 0x9 0x0" #port 5 lane 0 + "0x08 0x00 0x3c 0xf 0x0" #port 5 lane 1 + "0x08 0x00 0x3c 0x9 0x0" #port 5 lane 2 + "0x08 0x00 0x3c 0x9 0x0" #port 5 lane 3 + "0x08 0x00 0x3c 0x9 0x0" #port 6 lane 0 + "0x08 0x00 0x3c 0x9 0x0" #port 6 lane 1 + "0x08 0x00 0x3c 0x9 0x0" #port 6 lane 2 + "0x08 0x00 0x3c 0xe 0x0" #port 6 lane 3 + "0x08 0x00 0x3c 0x9 0x0" #port 7 lane 0 + "0x08 0x00 0x3c 0xa 0x0" #port 7 lane 1 + "0x08 0x00 0x3c 0x9 0x0" #port 7 lane 2 + "0x08 0x00 0x3c 0xe 0x0" #port 7 lane 3 + "0x08 0x04 0x3c 0xf 0x0" #port 8 lane 0 + "0x08 0x00 0x3c 0xf 0x0" #port 8 lane 1 + "0x08 0x04 0x3c 0xf 0x0" #port 8 lane 2 + "0x08 0x00 0x3c 0xf 0x0" #port 8 lane 3 + "0x08 0x04 0x3c 0xf 0x0" #port 9 lane 0 + "0x08 0x04 0x3c 0xf 0x0" #port 9 lane 1 + "0x08 0x04 0x3c 0xf 0x0" #port 9 lane 2 + "0x08 0x04 0x3c 0xf 0x0" #port 9 lane 3 + "0x08 0x04 0x3c 0xf 0x0" #port 10 lane 0 + "0x10 0x08 0x3c 0xf 0x0" #port 10 lane 1 + "0x08 0x04 0x3c 0xf 0x0" #port 10 lane 2 + "0x08 0x04 0x3c 0xf 0x0" #port 10 lane 3 + "0x08 0x08 0x3c 0xf 0x0" #port 11 lane 0 + "0x08 0x04 0x3c 0xf 0x0" #port 11 lane 1 + "0x08 0x04 0x3c 0xf 0x0" #port 11 lane 2 + "0x08 0x04 0x3c 0xf 0x0" #port 11 lane 3 + "0x08 0x0c 0x3c 0xf 0x0" #port 12 lane 0 + "0x08 0x08 0x3c 0xf 0x0" #port 12 lane 1 + "0x08 0x0c 0x3c 0xf 0x0" #port 12 lane 2 + "0x08 0x08 0x3c 0xf 0x0" #port 12 lane 3 + "0x08 0x08 0x3c 0xf 0x0" #port 13 lane 0 + "0x08 0x0c 0x3c 0xf 0x0" #port 13 lane 1 + "0x08 0x08 0x3c 0xf 0x0" #port 13 lane 2 + "0x08 0x0c 0x3c 0xf 0x0" #port 13 lane 3 + "0x10 0x10 0x3c 0xf 0x0" #port 14 lane 0 + "0x08 0x0c 0x3c 0xf 0x0" #port 14 lane 1 + "0x08 0x0c 0x3c 0xf 0x0" #port 14 lane 2 + "0x08 0x0c 0x3c 0xf 0x0" #port 14 lane 3 + "0x08 0x14 0x3c 0xf 0x0" #port 15 lane 0 + "0x08 0x10 0x3c 0xf 0x0" #port 15 lane 1 + "0x08 0x10 0x3c 0xf 0x0" #port 15 lane 2 + "0x08 0x10 0x3c 0xf 0x0" #port 15 lane 3 +) + +#get field value in si value array for xe port +function get_xe_si { + local port=$1 + local field=$2 + local type=$3 + local index=$port + if [ "$type" == "${AOC_TYPE}" ]; then + SI_VAL=$(echo "${xe_aoc_si_value[$index]}" | awk '{print $'$field'}') + else + SI_VAL=$(echo "${xe_dac_si_value[$index]}" | awk '{print $'$field'}') + fi +} + +#get field value in si value array for ce port +function get_ce_si { + local port=$1 + local lane=$2 + local field=$3 + local type=$4 + index=$(( (${port}-1)*4+${lane} )) + if [ "$type" == "${AOC_TYPE}" ]; then + SI_VAL=$(echo "${ce_aoc_si_value[$index]}" | awk '{print $'$field'}') + else + SI_VAL=$(echo "${ce_dac_si_value[$index]}" | awk '{print $'$field'}') + fi +} + +# set si value for xe port +function _qsfp_xe_si_set { + # convert PORT to xe port index + local xe_port=$PORT + # generate command for SI PRE value + get_xe_si $xe_port $SI_PRE_IDX $TYPE + local pre_cmd="phy xe${xe_port} CL93N72_UT_CTL2r CL93N72_TXFIR_PRE=${SI_VAL}" + # generate command for SI POST value + get_xe_si $xe_port $SI_POST_IDX $TYPE + local post_cmd="phy xe${xe_port} CL93N72_UT_CTL2r CL93N72_TXFIR_POST=${SI_VAL}" + # generate command for SI MAIN value + get_xe_si $xe_port $SI_MAIN_IDX $TYPE + local main_cmd="phy xe${xe_port} CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=${SI_VAL}" + # generate command for SI AMP CONTROL value + get_xe_si $xe_port $SI_AMP_IDX $TYPE + local amp_val=$SI_VAL + get_xe_si $xe_port $SI_DRI_IDX $TYPE + local dri_val=$SI_VAL + local amp_cmd="phy xe${xe_port} AMS_TX_CTL2r AMS_TX_AMP_CTL=${amp_val} AMS_TX_DRIVERMODE=${dri_val}" + # apply bcmcmd + bcmcmd "${pre_cmd};${post_cmd};${main_cmd};${amp_cmd}" +} + +# set aoc si value for ce port +function _qsfp_ce_si_set { + # convert PORT to ce port index + local ce_port=$(( $PORT - 48 )) + for lane in {0..3}; + do + # generate command for SI PRE value + get_ce_si $ce_port $lane $SI_PRE_IDX $TYPE + local pre_cmd="phy ce${ce_port} CL93N72_UT_CTL2r.${lane} CL93N72_TXFIR_PRE=${SI_VAL}" + # generate command for SI POST value + get_ce_si $ce_port $lane $SI_POST_IDX $TYPE + local post_cmd="phy ce${ce_port} CL93N72_UT_CTL2r.${lane} CL93N72_TXFIR_POST=${SI_VAL}" + # generate command for SI MAIN value + get_ce_si $ce_port $lane $SI_MAIN_IDX $TYPE + local main_cmd="phy ce${ce_port} CL93N72_UT_CTL3r.${lane} CL93N72_TXFIR_MAIN=${SI_VAL}" + # generate command for SI AMP CONTROL value + get_ce_si $ce_port $lane $SI_AMP_IDX $TYPE + local amp_val=$SI_VAL + get_ce_si $ce_port $lane $SI_AMP_IDX $TYPE + local dri_val=$SI_VAL + local amp_cmd="phy ce${ce_port} AMS_TX_CTL2r.${lane} AMS_TX_AMP_CTL=${amp_val} AMS_TX_DRIVERMODE=${dri_val}" + # apply bcmcmd + bcmcmd "${pre_cmd};${post_cmd};${main_cmd};${amp_cmd}" + done +} + +#QSFP SI value set +function _qsfp_si_set { + if [[ $PORT -le 47 && $PORT -ge 0 ]]; then + # xe port + _qsfp_xe_si_set + else + # ce port + _qsfp_ce_si_set + fi +} + +function _util_input_check { + # input parameter validation + if [[ $1 -lt $2 || $1 -gt $3 ]]; then + echo "Please input number $2~$3" + exit + fi +} + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} ${AOC_TYPE} [${MIN_PORT}-${MAX_PORT}]" + echo " : ${0} ${DAC_TYPE} [${MIN_PORT}-${MAX_PORT}]" + echo "----------------------------------------------------" +} + +#Main Function +function _main { + + # TODO: remove after SI value ready + #exit ${TRUE} + + if [ -z $PORT ]; then + _help + exit ${FALSE} + fi + + if [ "${TYPE}" == "help" ]; then + _help + elif [ "${TYPE}" == "${AOC_TYPE}" ] || [ "${TYPE}" == "${DAC_TYPE}" ]; then + _util_input_check "$PORT" "$MIN_PORT" "$MAX_PORT" + _qsfp_si_set + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/s8900_64xc_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/s8900_64xc_monitor.sh new file mode 100755 index 000000000000..8bfb22328003 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s8900-64xc/utils/s8900_64xc_monitor.sh @@ -0,0 +1,39 @@ +#!/bin/bash +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=5 +I2C_UTILS="/usr/sbin/i2c_utils.sh" + + +# LED status monitor +function _led_monitor { + ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_psu_status_set >/dev/null + ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null +} + +# main function +function _main { + while true + do + _led_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/README.md b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/README.md new file mode 100644 index 000000000000..78f828e25310 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/README.md @@ -0,0 +1,185 @@ +# Ingrasys S9100-32X Platform Driver for SONiC + +Copyright (C) 2016 Ingrasys, Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + +## Licensing terms + +The Licensing terms of the files within this project is split 2 parts. +The Linux kernel is released under the GNU General Public License version 2. +All other code is released under the GNU General Public License version 3. +Please see the LICENSE file for copies of both licenses. + +## Contents of this package + + - service/ + > Service config files for platform initialization and monitoring + - utils/ + > Scripts useful during platform bringup and sysfs function + - conf/ + > Platform configure files. + +## Kernel modules and drivers + +The driver for interacting with Ingrasys S9100-32X is contained in the I2C +kernel module and initialization script. The initialization script loads +the modules in the correct order. It has been built and tested against +the Linux 3.16 kernel. + +The initialization script will modprobe the needed modules, navigate to the +module's device directory in sysfs, and write configuration data to +the kernel module. + +### IGB + +This is OOB Ports on front panel for management plane. + +The IGB module must be loaded first on Ingrasys S9100-32X platform. + +### I2C i801 + +The I2C i801 on Ingrasys S9100-32X can be found in +`/sys/bus/i2c/devices/i2c-0/` + +This is I2C bus for Clock Gen, DIMM channel and digital potentiometers. + +The i801 module must be loaded second on Ingrasys S9100-32X. + +### I2C iSMT + +The I2C iSMT module on S9100-32X can be found in +`/sys/bus/i2c/devices/i2c-1/` + +This is I2C bus for CPLD, HWM, power controller and I2C Switches. + +The i801 module must be loaded third on Ingrasys S9100-32X. + +### I2C PCA9548 +The PCA9548 module on S9100-32X can be found in +`/sys/bus/i2c/devices/i2c-2/` , `/sys/bus/i2c/devices/i2c-3/`, +`/sys/bus/i2c/devices/i2c-4/`, `/sys/bus/i2c/devices/i2c-5/`, +`/sys/bus/i2c/devices/i2c-6/`, `/sys/bus/i2c/devices/i2c-7/`, +`/sys/bus/i2c/devices/i2c-8/`, `/sys/bus/i2c/devices/i2c-9/`. + +The pca9548 module for zQSFP module get/set functions, PSU information, +fan status and EEPROM. + +## Hardware components + +The hardware components are initialized in the init script on S9100-32X. +The following describes manual initialization as well as interaction. +The examples below are just for Ingrasys S9100-32X platform. + +### Hardware initialization + +When the sonic-platform-ingrasys-s9100 package is installed on the S9100-32X, +it is automatically initialized. If you want to manual initialization, the +utility command usage as follows: +``` + i2c_utils.sh i2c_init +``` + +### EEPROM + +The EEPROM is including the board SKU, model name, vendor name, serial number, +and other information can be accessed with the specific eeprom kernel module. +After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs. + +The hexdump utility can be used to decode the raw output of the EEPROM. +For example, +``` + bash# echo "mb_eeprom 0x54" > /sys/bus/i2c/devices/i2c-9/new_device + bash# cat /sys/bus/i2c/drivers/mb_eeprom/9-0054/eeprom | hexdump -C +``` + +### Front panel LEDs + +LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`. +Utility function command usage as follows: + +``` +Status LED: + i2c_utils.sh i2c_sys_led green|amber on|off + +Fan status LED: + i2c_utils.sh i2c_fan_led green|amber on|off + +PSU1 status LED: + i2c_utils.sh i2c_psu1_led green|amber on|off + +PSU2 status LED: + i2c_utils.sh i2c_psu2_led green|amber on|off + +``` +QSFP Module Port LEDs control by ASIC library. + + +### Fan speed + +Fan speed are controlled by the w83795 kernel module. +It can be found in `/sys/class/hwmon/hwmon1/device/`. +If they were compiled as modules, you will need to modprobe w83795 for +their sysfs entries to show up. Each fan has an `fan_input` file +for reading the fan speed. And `pwm1` setting fan1 to fan4, +`pwm2` setting fan5 to fan8. + +There is docker-platform-monitor container installed fancontrol package that can +automatic control platform fan speed. + + +### Temperature sensors + +Temperature sensors are controlled by the w83795 kernel +module. It can be found in `/sys/class/hwmon/hwmon1/device/`. +If they were compiled as modules, then you will need to modprobe w83795 for +their sysfs entries to show up. +`temp1_input` is front MAC temperature sensor. `temp2_input` is rear MAC +temperature sensor. + +There is docker-platform-monitor container installed lm-sensors package that can +monitor platform temperature. And `sensors` command can show each +temperature sensors status. + +### Power supplies + +Power supplies status and its EEPROM info can be used i2c utility +`/usr/sbin/i2c_utils.sh` to get. +The usage as follows: +``` +PSU EEPROM: + i2c_utils.sh i2c_psu_eeprom_get + hexdump -C psu0.rom + hexdump -C psu1.rom + +PSU Status: + i2c_utils.sh i2c_psu_status +``` + +### QSFPs +QSFP modules are managed by the pca9548 kernel driver. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +QSFP EEPROM: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + +QSFP Insert Event: + i2c_utils.sh i2c_qsfp_eeprom_get [1-32] + 0 => not insert + 1 => inserted +``` + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/Makefile b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/Makefile new file mode 100755 index 000000000000..0247bd586f63 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := eeprom_mb.o +obj-m+= i2c_cpld.o \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/eeprom_mb.c b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/eeprom_mb.c new file mode 100755 index 000000000000..01ce44ad3fee --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/eeprom_mb.c @@ -0,0 +1,212 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57, I2C_CLIENT_END }; + + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 256 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void mb_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, ((u8)addr >> 8) & 0xFF, (u8)addr & 0xFF); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t mb_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + mb_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static struct bin_attribute mb_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = EEPROM_SIZE, + .read = mb_eeprom_read, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int mb_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x50. So decline + attaching to addresses >= 0x51 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x51) { + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + return -ENODEV; + } + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int mb_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &mb_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int mb_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &mb_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id mb_eeprom_id[] = { + { "mb_eeprom", 0 }, + { } +}; + +static struct i2c_driver mb_eeprom_driver = { + .driver = { + .name = "mb_eeprom", + }, + .probe = mb_eeprom_probe, + .remove = mb_eeprom_remove, + .id_table = mb_eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = mb_eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(mb_eeprom_driver); + +MODULE_AUTHOR("Wade "); +MODULE_DESCRIPTION("Ingrasys S9100 Mother Borad EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/i2c_cpld.c b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/i2c_cpld.c new file mode 100755 index 000000000000..626c63177b50 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/i2c_cpld.c @@ -0,0 +1,448 @@ +/* + * S9100-32X I2C CPLD driver + * + * Copyright (C) 2017 Ingrasys, Inc. + * Wade He + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "i2c_cpld.h" + +#ifdef DEBUG + #define DEBUG_PRINT(fmt, args...) \ + printk(KERN_INFO "%s[%d]: " fmt "\r\n", \ + __FUNCTION__, __LINE__, ##args) +#else + #define DEBUG_PRINT(fmt, args...) +#endif + +#define I2C_READ_BYTE_DATA(ret, lock, i2c_client, reg) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_read_byte_data(i2c_client, reg); \ + mutex_unlock(lock); \ +} +#define I2C_WRITE_BYTE_DATA(ret, lock, i2c_client, reg, val) \ +{ \ + mutex_lock(lock); \ + ret = i2c_smbus_write_byte_data(i2c_client, reg, val); \ + mutex_unlock(lock); \ +} + +/* CPLD sysfs attributes index */ +enum i2c_cpld_sysfs_attributes { + CPLD_ACCESS_REG, + CPLD_REGISTER_VAL, + CPLD_PORT_START, + CPLD_PORTS, + CPLD_VERSION, + CPLD_ID, + CPLD_BOARD_TYPE, + CPLD_EXT_BOARD_TYPE, + CPLD_PW_GOOD, + CPLD_PW_ABS, +}; + +/* CPLD sysfs attributes hook functions */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, const char *buf, size_t count); +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_pw_good(struct device *dev, + struct device_attribute *da, char *buf); +static ssize_t read_pw_abs(struct device *dev, + struct device_attribute *da, char *buf); + +static LIST_HEAD(cpld_client_list); /* client list for cpld */ +static struct mutex list_lock; /* mutex for client list */ + +struct cpld_client_node { + struct i2c_client *client; + struct list_head list; +}; + +struct cpld_data { + int index; /* CPLD index */ + struct mutex access_lock; /* mutex for cpld access */ + u8 access_reg; /* register to access */ +}; + +/* CPLD device id and data */ +static const struct i2c_device_id i2c_cpld_id[] = { + { "i2c_cpld", i2c_cpld }, + {} +}; + +/* Addresses scanned for i2c_cpld */ +static const unsigned short cpld_i2c_addr[] = { 0x33, I2C_CLIENT_END }; +/* platform sysfs object */ +extern struct kobject *s9230_64x_kobj; + + +/* define all support register access of cpld in attribute */ +static SENSOR_DEVICE_ATTR(cpld_access_register, S_IWUSR | S_IRUGO, + read_access_register, write_access_register, CPLD_ACCESS_REG); +static SENSOR_DEVICE_ATTR(cpld_register_value, S_IWUSR | S_IRUGO, + read_register_value, write_register_value, CPLD_REGISTER_VAL); +static SENSOR_DEVICE_ATTR(cpld_version, S_IRUGO, + read_cpld_version, NULL, CPLD_VERSION); +static SENSOR_DEVICE_ATTR(cpld_board_type, S_IRUGO, + read_board_type, NULL, CPLD_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_ext_board_type, S_IRUGO, + read_ext_board_type, NULL, CPLD_EXT_BOARD_TYPE); +static SENSOR_DEVICE_ATTR(cpld_pw_good, S_IRUGO, + read_pw_good, NULL, CPLD_PW_GOOD); +static SENSOR_DEVICE_ATTR(cpld_pw_abs, S_IRUGO, + read_pw_abs, NULL, CPLD_PW_ABS); + + +/* define support attributes of cpldx , total 5 */ +/* cpld 1 */ +static struct attribute *i2c_cpld_attributes[] = { + &sensor_dev_attr_cpld_access_register.dev_attr.attr, + &sensor_dev_attr_cpld_register_value.dev_attr.attr, + &sensor_dev_attr_cpld_version.dev_attr.attr, + &sensor_dev_attr_cpld_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_ext_board_type.dev_attr.attr, + &sensor_dev_attr_cpld_pw_good.dev_attr.attr, + &sensor_dev_attr_cpld_pw_abs.dev_attr.attr, + NULL +}; + +/* cpld 1 attributes group */ +static const struct attribute_group i2c_cpld_group = { + .attrs = i2c_cpld_attributes, +}; + +/* read access register from cpld data */ +static ssize_t read_access_register(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + + return sprintf(buf, "0x%x\n", reg); +} + +/* write access register to cpld data */ +static ssize_t write_access_register(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + + if (kstrtou8(buf, 0, ®) < 0) + return -EINVAL; + + data->access_reg = reg; + return count; +} + +/* read the value of access register in cpld data */ +static ssize_t read_register_value(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg = data->access_reg; + int reg_val; + + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + + if (reg_val < 0) + return -1; + + return sprintf(buf, "0x%x\n", reg_val); +} + +/* wrtie the value to access register in cpld data */ +static ssize_t write_register_value(struct device *dev, + struct device_attribute *da, + const char *buf, + size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + int ret = -EIO; + u8 reg = data->access_reg; + u8 reg_val; + + if (kstrtou8(buf, 0, ®_val) < 0) + return -EINVAL; + + I2C_WRITE_BYTE_DATA(ret, &data->access_lock, client, reg, reg_val); + + return count; +} + +/* get cpdl version register value */ +static ssize_t read_cpld_version(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_VERSION) { + reg = CPLD_VERSION_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get board type register value */ +static ssize_t read_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_BOARD_TYPE) { + reg = CPLD_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_ext_board_type(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_EXT_BOARD_TYPE) { + reg = CPLD_EXT_BOARD_TYPE_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_pw_good(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_PW_GOOD) { + reg = CPLD_PW_GOOD_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* get extend board type register value */ +static ssize_t read_pw_abs(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 reg; + int reg_val; + + if (attr->index == CPLD_PW_ABS) { + reg = CPLD_PW_ABS_REG; + I2C_READ_BYTE_DATA(reg_val, &data->access_lock, client, reg); + if (reg_val < 0) + return -1; + return sprintf(buf, "0x%02x\n", reg_val); + } + return -1; +} + +/* add valid cpld client to list */ +static void i2c_cpld_add_client(struct i2c_client *client) +{ + struct cpld_client_node *node = NULL; + + node = kzalloc(sizeof(struct cpld_client_node), GFP_KERNEL); + if (!node) { + dev_info(&client->dev, + "Can't allocate cpld_client_node for index %d\n", + client->addr); + return; + } + + node->client = client; + + mutex_lock(&list_lock); + list_add(&node->list, &cpld_client_list); + mutex_unlock(&list_lock); +} + +/* remove exist cpld client in list */ +static void i2c_cpld_remove_client(struct i2c_client *client) +{ + struct list_head *list_node = NULL; + struct cpld_client_node *cpld_node = NULL; + int found = 0; + + mutex_lock(&list_lock); + list_for_each(list_node, &cpld_client_list) { + cpld_node = list_entry(list_node, + struct cpld_client_node, list); + + if (cpld_node->client == client) { + found = 1; + break; + } + } + + if (found) { + list_del(list_node); + kfree(cpld_node); + } + mutex_unlock(&list_lock); +} + +/* cpld drvier probe */ +static int i2c_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + struct cpld_data *data = NULL; + + data = kzalloc(sizeof(struct cpld_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* init cpld data for client */ + i2c_set_clientdata(client, data); + mutex_init(&data->access_lock); + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_info(&client->dev, + "i2c_check_functionality failed (0x%x)\n", + client->addr); + status = -EIO; + goto exit; + } + + + status = sysfs_create_group(&client->dev.kobj,&i2c_cpld_group); + + if (status) + goto exit; + + dev_info(&client->dev, "chip found\n"); + + /* add probe chip to client list */ + i2c_cpld_add_client(client); + + return 0; +exit: + sysfs_remove_group(&client->dev.kobj, &i2c_cpld_group); + return status; +} + +/* cpld drvier remove */ +static int i2c_cpld_remove(struct i2c_client *client) +{ + + sysfs_remove_group(&client->dev.kobj, &i2c_cpld_group); + + i2c_cpld_remove_client(client); + return 0; +} + +MODULE_DEVICE_TABLE(i2c, i2c_cpld_id); + +static struct i2c_driver i2c_cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "i2c_cpld", + }, + .probe = i2c_cpld_probe, + .remove = i2c_cpld_remove, + .id_table = i2c_cpld_id, + .address_list = cpld_i2c_addr, +}; + +static int __init i2c_cpld_init(void) +{ + mutex_init(&list_lock); + return i2c_add_driver(&i2c_cpld_driver); +} + +static void __exit i2c_cpld_exit(void) +{ + i2c_del_driver(&i2c_cpld_driver); +} + +MODULE_AUTHOR("Wade He "); +MODULE_DESCRIPTION("Ingrasys S9100-32X Platform i2c cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_cpld_init); +module_exit(i2c_cpld_exit); + + + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/i2c_cpld.h b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/i2c_cpld.h new file mode 100755 index 000000000000..e103b05c717a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/modules/i2c_cpld.h @@ -0,0 +1,197 @@ +/* + * + * S9100-32X I2C CPLD driver header file + * + * Copyright (C) 2017 Ingrasys, Inc. + * Wade He + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef I2C_CPLD_H +#define I2C_CPLD_H + +// remove debug before release +#define DEBUG + +/* CPLD device index value */ +enum cpld_id { + i2c_cpld +}; + +/* port number on CPLD */ +#define CPLD_1_PORT_NUM 12 +#define CPLD_2_PORT_NUM 13 + +/* QSFP port number */ +#define QSFP_MAX_PORT_NUM 64 +#define QSFP_MIN_PORT_NUM 1 + +/* SFP+ port number */ +#define SFP_MAX_PORT_NUM 2 +#define SFP_MIN_PORT_NUM 1 + + +/* CPLD registers */ +#define CPLD_BOARD_TYPE_REG 0x0 +#define CPLD_EXT_BOARD_TYPE_REG 0x7 +#define CPLD_VERSION_REG 0x1 +#define CPLD_PW_GOOD_REG 0x2 +#define CPLD_PW_ABS_REG 0x3 + + +/* bit definition for register value */ + +enum CPLD_RESET_CONTROL_BITS { + CPLD_RESET_CONTROL_SWRST_BIT, + CPLD_RESET_CONTROL_CP2104RST_BIT, + CPLD_RESET_CONTROL_82P33814RST_BIT, + CPLD_RESET_CONTROL_BMCRST_BIT, +}; + +/* bit field structure for register value */ +struct cpld_reg_board_type_t { + u8 build_rev:2; + u8 hw_rev:2; + u8 board_id:4; +}; + +struct cpld_reg_version_t { + u8 revision:6; + u8 release:1; + u8 reserve:1; +}; + +struct cpld_reg_pw_good_t { + u8 reserve1:3; + u8 psu1:1; + u8 psu2:1; + u8 reserve2:3; +}; + +struct cpld_reg_pw_abs_t { + u8 psu1:1; + u8 psu2:1; + u8 reserve:6; +}; + +/* common manipulation */ +#define INVALID(i, min, max) ((i < min) || (i > max) ? 1u : 0u) +#define READ_BIT(val, bit) ((0u == (val & (1<bf_name) +#define READ_BF_1(bf_struct, val, bf_name, bf_value) \ + bf_struct bf; \ + bf.data = val; \ + bf_value = bf.bf_name +#define BOARD_TYPE_BUILD_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, build_rev, res) +#define BOARD_TYPE_HW_REV_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, hw_rev, res) +#define BOARD_TYPE_BOARD_ID_GET(val, res) \ + READ_BF(cpld_reg_board_type_t, val, board_id, res) +#define CPLD_VERSION_REV_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, revision, res) +#define CPLD_VERSION_REL_GET(val, res) \ + READ_BF(cpld_reg_version_t, val, release, res) +#define CPLD_PSU1_PW_GOOD_GET(val, res) \ + READ_BF(cpld_reg_pw_good_t, val, psu1, res) +#define CPLD_PSU2_PW_GOOD_GET(val, res) \ + READ_BF(cpld_reg_pw_good_t, val, psu2, res) +#define CPLD_PSU1_PW_ABS_GET(val, res) \ + READ_BF(cpld_reg_pw_abs_t, val, psu1, res) +#define CPLD_PSU2_PW_ABS_GET(val, res) \ + READ_BF(cpld_reg_pw_abs_t, val, psu2, res) +/* QSFP/SFP registers manipulation */ +#define QSFP_TO_CPLD_IDX(qsfp_port, cpld_index, cpld_port) \ +{ \ + if (QSFP_MIN_PORT_NUM <= qsfp_port && qsfp_port <= CPLD_1_PORT_NUM) { \ + cpld_index = cpld1; \ + cpld_port = qsfp_port - 1; \ + } else if (CPLD_1_PORT_NUM < qsfp_port \ + && qsfp_port <= QSFP_MAX_PORT_NUM) { \ + cpld_index = cpld2 + (qsfp_port - 1 - CPLD_1_PORT_NUM) \ + / CPLD_2_PORT_NUM; \ + cpld_port = (qsfp_port - 1 - CPLD_1_PORT_NUM) % \ + CPLD_2_PORT_NUM; \ + } else { \ + cpld_index = 0; \ + cpld_port = 0; \ + } \ +} +#define SFP_TO_CPLD_IDX(sfp_port, cpld_index) \ + (cpld_index = sfp_port - SFP_MIN_PORT_NUM) +#define QSFP_PORT_STATUS_REG(cpld_port) \ + (CPLD_QSFP_PORT_STATUS_BASE_REG + cpld_port) +#define QSFP_PORT_CONFIG_REG(cpld_port) \ + (CPLD_QSFP_PORT_CONFIG_BASE_REG + cpld_port) +#define QSFP_PORT_INT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_INT_BIT) +#define QSFP_PORT_ABS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_QSFP_PORT_STATUS_ABS_BIT) +#define QSFP_PORT_RESET_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_RESET_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_RESET_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_RESET_BIT) +#define QSFP_PORT_LPMODE_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define QSFP_PORT_LPMODE_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_QSFP_PORT_CONFIG_LPMODE_BIT) +#define SFP_PORT_PRESENT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_PRESENT_BIT) + + #define SFP_PORT_TXFAULT_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_TXFAULT_BIT) + #define SFP_PORT_RXLOS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_STATUS_RXLOS_BIT) + #define SFP_PORT_TXDIS_BIT_GET(port_status_value) \ + READ_BIT(port_status_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_RS_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_TS_BIT_GET(port_config_value) \ + READ_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) +#define SFP_PORT_TXDIS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_TXDIS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TXDIS_BIT) +#define SFP_PORT_RS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_RS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_RS_BIT) +#define SFP_PORT_TS_BIT_SET(port_config_value) \ + SET_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) +#define SFP_PORT_TS_BIT_CLEAR(port_config_value) \ + CLEAR_BIT(port_config_value, CPLD_SFP_PORT_CONFIG_TS_BIT) + +/* CPLD access functions */ +extern int i2c_cpld_get_qsfp_port_status_val(u8 port_num); +extern int i2c_cpld_get_qsfp_port_config_val(u8 port_num); +extern int i2c_cpld_set_qsfp_port_config_val(u8 port_num, u8 reg_val); +extern int i2c_cpld_get_sfp_port_status_val(u8 port_num); +extern int i2c_cpld_get_sfp_port_config_val(u8 port_num); +extern int i2c_cpld_set_sfp_port_config_val(u8 port_num, u8 reg_val); +extern u8 fp_port_to_phy_port(u8 fp_port); +#endif + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/service/qsfp-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/service/qsfp-monitor.service new file mode 100644 index 000000000000..584d6fcae895 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/service/qsfp-monitor.service @@ -0,0 +1,15 @@ +[Unit] +Description= This QSFP Monitor service is to setup QSFP SI. +Requires=s9100-monitor.service +After=s9100-monitor.service + +[Service] +ExecStart=/usr/sbin/qsfp_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/service/s9100-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/service/s9100-monitor.service new file mode 100644 index 000000000000..5e074782a852 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/service/s9100-monitor.service @@ -0,0 +1,19 @@ +[Unit] +Description= This Platform Monitor service is to initialize platform and monitor platform. +Before=platform-monitor.service +After=sysinit.target +Wants=fancontrol.service +Wants=qsfp-monitor.service +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/sbin/i2c_utils.sh i2c_init +ExecStart=/usr/sbin/s9100_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/i2c_utils.sh new file mode 100755 index 000000000000..bdcd4f1d7f9e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/i2c_utils.sh @@ -0,0 +1,1518 @@ +#!/bin/bash + +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +EXEC_FUNC=${1} +COLOR_LED=${2} +QSFP_PORT=${2} +QSFP_ACTION=${2} +MB_EEPROM_ACTION=${2} +ONOFF_LED=${3} +FAN_TRAY=${4} + +############################################################ +# Distributor ID: Debian +# Description: Debian GNU/Linux 8.6 (jessie) +# Release: 8.6 +# Codename: jessie +# Linux debian 3.16.0-4-amd64 #1 +# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux +############################################################ + +# Color Definition +COLOR_TITLE="\e[1;32m" ### Green ### +COLOR_WARNING="\e[1;33m" ### Yellow ### +COLOR_ERROR="\e[1;31m" ### Red ### +COLOR_END="\e[0m" ### END ### + +NUM_IGB_DEVICE=0 +NUM_I801_DEVICE=0 +NUM_ISMT_DEVICE=$(( ${NUM_I801_DEVICE} + 1 )) +NUM_MUX1_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 2 )) +NUM_MUX1_CHAN1_DEVICE=$(( ${NUM_I801_DEVICE} + 3 )) +NUM_MUX1_CHAN2_DEVICE=$(( ${NUM_I801_DEVICE} + 4 )) +NUM_MUX1_CHAN3_DEVICE=$(( ${NUM_I801_DEVICE} + 5 )) +NUM_MUX1_CHAN4_DEVICE=$(( ${NUM_I801_DEVICE} + 6 )) +NUM_MUX1_CHAN5_DEVICE=$(( ${NUM_I801_DEVICE} + 7 )) +NUM_MUX1_CHAN6_DEVICE=$(( ${NUM_I801_DEVICE} + 8 )) +NUM_MUX1_CHAN7_DEVICE=$(( ${NUM_I801_DEVICE} + 9 )) +NUM_MUX3_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 10 )) +NUM_MUX4_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 18 )) +NUM_MUX5_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 26 )) +NUM_MUX6_CHAN0_DEVICE=$(( ${NUM_I801_DEVICE} + 34 )) + +PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" +PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon1" +PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_ISMT_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_ISMT_DEVICE}" +PATH_MUX_CHAN0_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN0_DEVICE}" +PATH_MUX_CHAN1_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN1_DEVICE}" +PATH_MUX_CHAN2_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN2_DEVICE}" +PATH_MUX_CHAN3_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN3_DEVICE}" +PATH_MUX_CHAN4_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN4_DEVICE}" +PATH_MUX_CHAN5_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN5_DEVICE}" +PATH_MUX_CHAN6_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN6_DEVICE}" +PATH_MUX_CHAN7_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN7_DEVICE}" + +#Power Supply Status +PSU_DC_ON=1 +PSU_DC_OFF=0 +PSU_EXIST=1 +PSU_NOT_EXIST=0 + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} i2c_init" + echo " : ${0} i2c_deinit" + echo " : ${0} i2c_temp_init" + echo " : ${0} i2c_fan_init" + echo " : ${0} i2c_volmon_init" + echo " : ${0} i2c_io_exp_init" + echo " : ${0} i2c_gpio_init" + echo " : ${0} i2c_gpio_deinit" + echo " : ${0} i2c_led_test" + echo " : ${0} i2c_psu_eeprom_get" + echo " : ${0} i2c_mb_eeprom_get" + echo " : ${0} i2c_qsfp_eeprom_get [1-32]" + echo " : ${0} i2c_qsfp_eeprom_init new|delete" + echo " : ${0} i2c_mb_eeprom_init new|delete" + echo " : ${0} i2c_qsfp_status_get [1-32]" + echo " : ${0} i2c_qsfp_type_get [1-32]" + echo " : ${0} i2c_board_type_get" + echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_psu_status_set" + echo " : ${0} i2c_led_fan_status_set" + echo " : ${0} i2c_led_fan_tray_status_set" + echo " : ${0} i2c_cpld_version" + echo " : ${0} i2c_front_temp" + echo " : ${0} i2c_rear_temp" + echo " : ${0} i2c_test_all" + echo " : ${0} i2c_sys_led green|amber on|off" + echo " : ${0} i2c_fan_led green|amber on|off" + echo " : ${0} i2c_psu1_led green|amber on|off" + echo " : ${0} i2c_psu2_led green|amber on|off" + echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]" + echo "----------------------------------------------------" +} + +#Pause function +function _pause { + read -p "$*" +} + +#Retry command function +function _retry { + local i + for i in {1..5}; + do + eval "${*}" && break || echo "retry"; sleep 1; + done +} + +#I2C Init +function _i2c_init { + echo "=========================================================" + echo "# Description: I2C Init" + echo "=========================================================" + + rmmod i2c_ismt + rmmod i2c_i801 + modprobe i2c_i801 + modprobe i2c_ismt + modprobe i2c_dev + modprobe i2c_mux_pca954x force_deselect_on_exit=1 + + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x70' > ${PATH_ISMT_DEVICE}/new_device" + else + echo "pca9548 0x70 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX3_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x71' > ${PATH_MUX_CHAN0_DEVICE}/new_device" + else + echo "pca9548 0x71 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX4_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x72' > ${PATH_MUX_CHAN1_DEVICE}/new_device" + else + echo "pca9548 0x72 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX5_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x73' > ${PATH_MUX_CHAN2_DEVICE}/new_device" + else + echo "pca9548 0x73 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX6_CHAN0_DEVICE}" ]; then + _retry "echo 'pca9548 0x74' > ${PATH_MUX_CHAN3_DEVICE}/new_device" + else + echo "pca9548 0x74 already init." + fi + if [ ! -e "${PATH_SYS_I2C_DEVICES}/${NUM_MUX1_CHAN6_DEVICE}-0075" ]; then + _retry "echo 'pca9546 0x75' > ${PATH_MUX_CHAN6_DEVICE}/new_device" + else + echo "pca9548 0x75 already init." + fi + #Init CPLD LED_CLR Register (Front Port LED) + i2cset -y ${NUM_I801_DEVICE} 0x33 0x34 0x10 + + rmmod coretemp + rmmod jc42 + rmmod w83795 + _i2c_temp_init + _i2c_volmon_init + modprobe coretemp + modprobe w83795 + modprobe jc42 + modprobe eeprom + modprobe eeprom_mb + modprobe gpio-pca953x + _i2c_fan_init + _i2c_io_exp_init + _i2c_gpio_init + _i2c_cpld_init + _i2c_qsfp_eeprom_init "new" + _i2c_mb_eeprom_init "new" + _i2c_psu_eeprom_init + _i2c_led_psu_status_set + _i2c_led_fan_status_set + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_sys_led + _config_rmem +} + +#I2C Deinit +function _i2c_deinit { + _i2c_gpio_deinit + for mod in i2c_cpld coretemp jc42 w83795 eeprom_mb gpio-pca953x i2c_mux_pca954x i2c_ismt i2c_i801; + do + [ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod + done +} + +#Temperature sensor Init +function _i2c_temp_init { + echo -n "TEMP INIT..." + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x00 0x80 + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x05 0x7F + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x04 0x0A + echo "Done" +} + +#FAN Init +function _i2c_fan_init { + echo -n "FAN INIT..." + if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm1 + echo 120 > ${PATH_HWMON_W83795_DEVICE}/device/pwm2 + echo "SUCCESS" + else + echo "FAIL" + fi + +} + +#VOLMON Init +function _i2c_volmon_init { + echo -n "VOLMON INIT..." + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x00 0x80 + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x02 0xFF + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x03 0x50 + i2cset -y -r ${NUM_I801_DEVICE} 0x2F 0x04 0x0A + echo "Done" +} + +#IO Expander Init +function _i2c_io_exp_init { + echo "=========================================================" + echo "# Description: I2C IO Expender Init" + echo "=========================================================" + #SMBUS0 IO_EXPENDER + i2cset -y -r ${NUM_I801_DEVICE} 0x27 4 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 5 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 2 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 3 0x00 + i2cset -y -r ${NUM_I801_DEVICE} 0x27 6 0xFF + i2cset -y -r ${NUM_I801_DEVICE} 0x27 7 0xFF + + #SMBUS1 + #ABS + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x20 6 0xFF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x20 7 0xFF + + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x21 6 0xFF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x21 7 0xFF + + #Transcevior INT + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 6 0xFF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x22 7 0xFF + + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 6 0xFF + i2cset -y -r ${NUM_MUX1_CHAN4_DEVICE} 0x23 7 0xFF + + echo "Init ZQSFP IO Expender" + echo "set ZQSFP LP_MODE = 0" + #set ZQSFP LP_MODE = 0 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x20 7 0x00 + + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x21 7 0x00 + + echo "set ZQSFP RST = 1" + #set ZQSFP RST = 1 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 2 0xFF + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 3 0xFF + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x22 7 0x00 + + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 2 0xFF + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 3 0xFF + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x23 7 0x00 + + echo "set ZQSFP mode" + #ZQSFP mode + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x24 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x24 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x24 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x24 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x24 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x24 7 0x00 + + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x25 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x25 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x25 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x25 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x25 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN5_DEVICE} 0x25 7 0x00 + + #ZQSFP/SFP+/E-Card General + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x20 6 0xFF + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x20 7 0xFF + + #LED board after PVT (S9100_IO_EXP_LED_ID) + echo "Init LED IO Expender" + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 6 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 7 0x00 + + #PSU I/O (S9100_IO_EXP_PSU_ID) + echo "Init PSU IO Expender" + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x23 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x23 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x23 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x23 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x23 6 0xBB + i2cset -y -r ${NUM_MUX1_CHAN6_DEVICE} 0x23 7 0xFF + + #FAN I/O (S9100_IO_EXP_FAN_ID) + echo "Init FAN IO Expender" + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x20 4 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x20 5 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x20 2 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x20 3 0x00 + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x20 6 0xCC + i2cset -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x20 7 0xCC +} + +#GPIO Init +function _i2c_gpio_init { + #ABS Port 0-15 + echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device + echo 240 > /sys/class/gpio/export + echo 241 > /sys/class/gpio/export + echo 242 > /sys/class/gpio/export + echo 243 > /sys/class/gpio/export + echo 244 > /sys/class/gpio/export + echo 245 > /sys/class/gpio/export + echo 246 > /sys/class/gpio/export + echo 247 > /sys/class/gpio/export + echo 248 > /sys/class/gpio/export + echo 249 > /sys/class/gpio/export + echo 250 > /sys/class/gpio/export + echo 251 > /sys/class/gpio/export + echo 252 > /sys/class/gpio/export + echo 253 > /sys/class/gpio/export + echo 254 > /sys/class/gpio/export + echo 255 > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio241/active_low #zQSFP00 + echo 1 > /sys/class/gpio/gpio240/active_low #zQSFP01 + echo 1 > /sys/class/gpio/gpio243/active_low #zQSFP02 + echo 1 > /sys/class/gpio/gpio242/active_low #zQSFP03 + echo 1 > /sys/class/gpio/gpio245/active_low #zQSFP04 + echo 1 > /sys/class/gpio/gpio244/active_low #zQSFP05 + echo 1 > /sys/class/gpio/gpio247/active_low #zQSFP06 + echo 1 > /sys/class/gpio/gpio246/active_low #zQSFP07 + echo 1 > /sys/class/gpio/gpio249/active_low #zQSFP08 + echo 1 > /sys/class/gpio/gpio248/active_low #zQSFP09 + echo 1 > /sys/class/gpio/gpio251/active_low #zQSFP10 + echo 1 > /sys/class/gpio/gpio250/active_low #zQSFP11 + echo 1 > /sys/class/gpio/gpio253/active_low #zQSFP12 + echo 1 > /sys/class/gpio/gpio252/active_low #zQSFP13 + echo 1 > /sys/class/gpio/gpio255/active_low #zQSFP14 + echo 1 > /sys/class/gpio/gpio254/active_low #zQSFP15 + + #ABS Port 16-31 + echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device + echo 224 > /sys/class/gpio/export + echo 225 > /sys/class/gpio/export + echo 226 > /sys/class/gpio/export + echo 227 > /sys/class/gpio/export + echo 228 > /sys/class/gpio/export + echo 229 > /sys/class/gpio/export + echo 230 > /sys/class/gpio/export + echo 231 > /sys/class/gpio/export + echo 232 > /sys/class/gpio/export + echo 233 > /sys/class/gpio/export + echo 234 > /sys/class/gpio/export + echo 235 > /sys/class/gpio/export + echo 236 > /sys/class/gpio/export + echo 237 > /sys/class/gpio/export + echo 238 > /sys/class/gpio/export + echo 239 > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio225/active_low #zQSFP16 + echo 1 > /sys/class/gpio/gpio224/active_low #zQSFP17 + echo 1 > /sys/class/gpio/gpio227/active_low #zQSFP18 + echo 1 > /sys/class/gpio/gpio226/active_low #zQSFP19 + echo 1 > /sys/class/gpio/gpio229/active_low #zQSFP20 + echo 1 > /sys/class/gpio/gpio228/active_low #zQSFP21 + echo 1 > /sys/class/gpio/gpio231/active_low #zQSFP22 + echo 1 > /sys/class/gpio/gpio230/active_low #zQSFP23 + echo 1 > /sys/class/gpio/gpio233/active_low #zQSFP24 + echo 1 > /sys/class/gpio/gpio232/active_low #zQSFP25 + echo 1 > /sys/class/gpio/gpio235/active_low #zQSFP26 + echo 1 > /sys/class/gpio/gpio234/active_low #zQSFP27 + echo 1 > /sys/class/gpio/gpio237/active_low #zQSFP28 + echo 1 > /sys/class/gpio/gpio236/active_low #zQSFP29 + echo 1 > /sys/class/gpio/gpio239/active_low #zQSFP30 + echo 1 > /sys/class/gpio/gpio238/active_low #zQSFP31 + + #INT Port 0-15 + echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device + echo 208 > /sys/class/gpio/export + echo 209 > /sys/class/gpio/export + echo 210 > /sys/class/gpio/export + echo 211 > /sys/class/gpio/export + echo 212 > /sys/class/gpio/export + echo 213 > /sys/class/gpio/export + echo 214 > /sys/class/gpio/export + echo 215 > /sys/class/gpio/export + echo 216 > /sys/class/gpio/export + echo 217 > /sys/class/gpio/export + echo 218 > /sys/class/gpio/export + echo 219 > /sys/class/gpio/export + echo 220 > /sys/class/gpio/export + echo 221 > /sys/class/gpio/export + echo 222 > /sys/class/gpio/export + echo 223 > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio208/active_low + echo 1 > /sys/class/gpio/gpio209/active_low + echo 1 > /sys/class/gpio/gpio210/active_low + echo 1 > /sys/class/gpio/gpio211/active_low + echo 1 > /sys/class/gpio/gpio212/active_low + echo 1 > /sys/class/gpio/gpio213/active_low + echo 1 > /sys/class/gpio/gpio214/active_low + echo 1 > /sys/class/gpio/gpio215/active_low + echo 1 > /sys/class/gpio/gpio216/active_low + echo 1 > /sys/class/gpio/gpio217/active_low + echo 1 > /sys/class/gpio/gpio218/active_low + echo 1 > /sys/class/gpio/gpio219/active_low + echo 1 > /sys/class/gpio/gpio220/active_low + echo 1 > /sys/class/gpio/gpio221/active_low + echo 1 > /sys/class/gpio/gpio222/active_low + echo 1 > /sys/class/gpio/gpio223/active_low + + #INT Port 16-31 + echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/new_device + echo 192 > /sys/class/gpio/export + echo 193 > /sys/class/gpio/export + echo 194 > /sys/class/gpio/export + echo 195 > /sys/class/gpio/export + echo 196 > /sys/class/gpio/export + echo 197 > /sys/class/gpio/export + echo 198 > /sys/class/gpio/export + echo 199 > /sys/class/gpio/export + echo 200 > /sys/class/gpio/export + echo 201 > /sys/class/gpio/export + echo 202 > /sys/class/gpio/export + echo 203 > /sys/class/gpio/export + echo 204 > /sys/class/gpio/export + echo 205 > /sys/class/gpio/export + echo 206 > /sys/class/gpio/export + echo 207 > /sys/class/gpio/export + echo 1 > /sys/class/gpio/gpio192/active_low + echo 1 > /sys/class/gpio/gpio193/active_low + echo 1 > /sys/class/gpio/gpio194/active_low + echo 1 > /sys/class/gpio/gpio195/active_low + echo 1 > /sys/class/gpio/gpio196/active_low + echo 1 > /sys/class/gpio/gpio197/active_low + echo 1 > /sys/class/gpio/gpio198/active_low + echo 1 > /sys/class/gpio/gpio199/active_low + echo 1 > /sys/class/gpio/gpio200/active_low + echo 1 > /sys/class/gpio/gpio201/active_low + echo 1 > /sys/class/gpio/gpio202/active_low + echo 1 > /sys/class/gpio/gpio203/active_low + echo 1 > /sys/class/gpio/gpio204/active_low + echo 1 > /sys/class/gpio/gpio205/active_low + echo 1 > /sys/class/gpio/gpio206/active_low + echo 1 > /sys/class/gpio/gpio207/active_low + + #LP Mode Port 0-15 + echo "pca9535 0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device + echo 176 > /sys/class/gpio/export + echo 177 > /sys/class/gpio/export + echo 178 > /sys/class/gpio/export + echo 179 > /sys/class/gpio/export + echo 180 > /sys/class/gpio/export + echo 181 > /sys/class/gpio/export + echo 182 > /sys/class/gpio/export + echo 183 > /sys/class/gpio/export + echo 184 > /sys/class/gpio/export + echo 185 > /sys/class/gpio/export + echo 186 > /sys/class/gpio/export + echo 187 > /sys/class/gpio/export + echo 188 > /sys/class/gpio/export + echo 189 > /sys/class/gpio/export + echo 190 > /sys/class/gpio/export + echo 191 > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio176/direction + echo out > /sys/class/gpio/gpio177/direction + echo out > /sys/class/gpio/gpio178/direction + echo out > /sys/class/gpio/gpio179/direction + echo out > /sys/class/gpio/gpio180/direction + echo out > /sys/class/gpio/gpio181/direction + echo out > /sys/class/gpio/gpio182/direction + echo out > /sys/class/gpio/gpio183/direction + echo out > /sys/class/gpio/gpio184/direction + echo out > /sys/class/gpio/gpio185/direction + echo out > /sys/class/gpio/gpio186/direction + echo out > /sys/class/gpio/gpio187/direction + echo out > /sys/class/gpio/gpio188/direction + echo out > /sys/class/gpio/gpio189/direction + echo out > /sys/class/gpio/gpio190/direction + echo out > /sys/class/gpio/gpio191/direction + + #LP Mode Port 16-31 + echo "pca9535 0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device + echo 160 > /sys/class/gpio/export + echo 161 > /sys/class/gpio/export + echo 162 > /sys/class/gpio/export + echo 163 > /sys/class/gpio/export + echo 164 > /sys/class/gpio/export + echo 165 > /sys/class/gpio/export + echo 166 > /sys/class/gpio/export + echo 167 > /sys/class/gpio/export + echo 168 > /sys/class/gpio/export + echo 169 > /sys/class/gpio/export + echo 170 > /sys/class/gpio/export + echo 171 > /sys/class/gpio/export + echo 172 > /sys/class/gpio/export + echo 173 > /sys/class/gpio/export + echo 174 > /sys/class/gpio/export + echo 175 > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio160/direction + echo out > /sys/class/gpio/gpio161/direction + echo out > /sys/class/gpio/gpio162/direction + echo out > /sys/class/gpio/gpio163/direction + echo out > /sys/class/gpio/gpio164/direction + echo out > /sys/class/gpio/gpio165/direction + echo out > /sys/class/gpio/gpio166/direction + echo out > /sys/class/gpio/gpio167/direction + echo out > /sys/class/gpio/gpio168/direction + echo out > /sys/class/gpio/gpio169/direction + echo out > /sys/class/gpio/gpio170/direction + echo out > /sys/class/gpio/gpio171/direction + echo out > /sys/class/gpio/gpio172/direction + echo out > /sys/class/gpio/gpio173/direction + echo out > /sys/class/gpio/gpio174/direction + echo out > /sys/class/gpio/gpio175/direction + + #RST Port 0-15 + echo "pca9535 0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device + echo 144 > /sys/class/gpio/export + echo 145 > /sys/class/gpio/export + echo 146 > /sys/class/gpio/export + echo 147 > /sys/class/gpio/export + echo 148 > /sys/class/gpio/export + echo 149 > /sys/class/gpio/export + echo 150 > /sys/class/gpio/export + echo 151 > /sys/class/gpio/export + echo 152 > /sys/class/gpio/export + echo 153 > /sys/class/gpio/export + echo 154 > /sys/class/gpio/export + echo 155 > /sys/class/gpio/export + echo 156 > /sys/class/gpio/export + echo 157 > /sys/class/gpio/export + echo 158 > /sys/class/gpio/export + echo 159 > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio144/direction + echo out > /sys/class/gpio/gpio145/direction + echo out > /sys/class/gpio/gpio146/direction + echo out > /sys/class/gpio/gpio147/direction + echo out > /sys/class/gpio/gpio148/direction + echo out > /sys/class/gpio/gpio149/direction + echo out > /sys/class/gpio/gpio150/direction + echo out > /sys/class/gpio/gpio151/direction + echo out > /sys/class/gpio/gpio152/direction + echo out > /sys/class/gpio/gpio153/direction + echo out > /sys/class/gpio/gpio154/direction + echo out > /sys/class/gpio/gpio155/direction + echo out > /sys/class/gpio/gpio156/direction + echo out > /sys/class/gpio/gpio157/direction + echo out > /sys/class/gpio/gpio158/direction + echo out > /sys/class/gpio/gpio159/direction + echo 1 > /sys/class/gpio/gpio144/active_low + echo 1 > /sys/class/gpio/gpio145/active_low + echo 1 > /sys/class/gpio/gpio146/active_low + echo 1 > /sys/class/gpio/gpio147/active_low + echo 1 > /sys/class/gpio/gpio148/active_low + echo 1 > /sys/class/gpio/gpio149/active_low + echo 1 > /sys/class/gpio/gpio150/active_low + echo 1 > /sys/class/gpio/gpio151/active_low + echo 1 > /sys/class/gpio/gpio152/active_low + echo 1 > /sys/class/gpio/gpio153/active_low + echo 1 > /sys/class/gpio/gpio154/active_low + echo 1 > /sys/class/gpio/gpio155/active_low + echo 1 > /sys/class/gpio/gpio156/active_low + echo 1 > /sys/class/gpio/gpio157/active_low + echo 1 > /sys/class/gpio/gpio158/active_low + echo 1 > /sys/class/gpio/gpio159/active_low + echo 0 > /sys/class/gpio/gpio144/value + echo 0 > /sys/class/gpio/gpio145/value + echo 0 > /sys/class/gpio/gpio146/value + echo 0 > /sys/class/gpio/gpio147/value + echo 0 > /sys/class/gpio/gpio148/value + echo 0 > /sys/class/gpio/gpio149/value + echo 0 > /sys/class/gpio/gpio150/value + echo 0 > /sys/class/gpio/gpio151/value + echo 0 > /sys/class/gpio/gpio152/value + echo 0 > /sys/class/gpio/gpio153/value + echo 0 > /sys/class/gpio/gpio154/value + echo 0 > /sys/class/gpio/gpio155/value + echo 0 > /sys/class/gpio/gpio156/value + echo 0 > /sys/class/gpio/gpio157/value + echo 0 > /sys/class/gpio/gpio158/value + echo 0 > /sys/class/gpio/gpio159/value + + #RST Port 16-31 + echo "pca9535 0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/new_device + echo 128 > /sys/class/gpio/export + echo 129 > /sys/class/gpio/export + echo 130 > /sys/class/gpio/export + echo 131 > /sys/class/gpio/export + echo 132 > /sys/class/gpio/export + echo 133 > /sys/class/gpio/export + echo 134 > /sys/class/gpio/export + echo 135 > /sys/class/gpio/export + echo 136 > /sys/class/gpio/export + echo 137 > /sys/class/gpio/export + echo 138 > /sys/class/gpio/export + echo 139 > /sys/class/gpio/export + echo 140 > /sys/class/gpio/export + echo 141 > /sys/class/gpio/export + echo 142 > /sys/class/gpio/export + echo 143 > /sys/class/gpio/export + echo out > /sys/class/gpio/gpio128/direction + echo out > /sys/class/gpio/gpio129/direction + echo out > /sys/class/gpio/gpio130/direction + echo out > /sys/class/gpio/gpio131/direction + echo out > /sys/class/gpio/gpio132/direction + echo out > /sys/class/gpio/gpio133/direction + echo out > /sys/class/gpio/gpio134/direction + echo out > /sys/class/gpio/gpio135/direction + echo out > /sys/class/gpio/gpio136/direction + echo out > /sys/class/gpio/gpio137/direction + echo out > /sys/class/gpio/gpio138/direction + echo out > /sys/class/gpio/gpio139/direction + echo out > /sys/class/gpio/gpio140/direction + echo out > /sys/class/gpio/gpio141/direction + echo out > /sys/class/gpio/gpio142/direction + echo out > /sys/class/gpio/gpio143/direction + echo 1 > /sys/class/gpio/gpio128/active_low + echo 1 > /sys/class/gpio/gpio129/active_low + echo 1 > /sys/class/gpio/gpio130/active_low + echo 1 > /sys/class/gpio/gpio131/active_low + echo 1 > /sys/class/gpio/gpio132/active_low + echo 1 > /sys/class/gpio/gpio133/active_low + echo 1 > /sys/class/gpio/gpio134/active_low + echo 1 > /sys/class/gpio/gpio135/active_low + echo 1 > /sys/class/gpio/gpio136/active_low + echo 1 > /sys/class/gpio/gpio137/active_low + echo 1 > /sys/class/gpio/gpio138/active_low + echo 1 > /sys/class/gpio/gpio139/active_low + echo 1 > /sys/class/gpio/gpio140/active_low + echo 1 > /sys/class/gpio/gpio141/active_low + echo 1 > /sys/class/gpio/gpio142/active_low + echo 1 > /sys/class/gpio/gpio143/active_low + echo 0 > /sys/class/gpio/gpio128/value + echo 0 > /sys/class/gpio/gpio129/value + echo 0 > /sys/class/gpio/gpio130/value + echo 0 > /sys/class/gpio/gpio131/value + echo 0 > /sys/class/gpio/gpio132/value + echo 0 > /sys/class/gpio/gpio133/value + echo 0 > /sys/class/gpio/gpio134/value + echo 0 > /sys/class/gpio/gpio135/value + echo 0 > /sys/class/gpio/gpio136/value + echo 0 > /sys/class/gpio/gpio137/value + echo 0 > /sys/class/gpio/gpio138/value + echo 0 > /sys/class/gpio/gpio139/value + echo 0 > /sys/class/gpio/gpio140/value + echo 0 > /sys/class/gpio/gpio141/value + echo 0 > /sys/class/gpio/gpio142/value + echo 0 > /sys/class/gpio/gpio143/value + +} + +#GPIO DeInit +function _i2c_gpio_deinit { + echo "0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device + echo "0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device + echo "0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device + echo "0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN4_DEVICE}/delete_device + echo "0x20" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/delete_device + echo "0x21" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/delete_device + echo "0x22" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/delete_device + echo "0x23" > /sys/bus/i2c/devices/i2c-${NUM_MUX1_CHAN5_DEVICE}/delete_device +} + +#I2C CPLD init +function _i2c_cpld_init { + echo "=========================================================" + echo "# Description: I2C CPLD Init..." + echo "=========================================================" + + ## modprobe i2c_cpld + modprobe i2c_cpld + ## Add CPLD device + echo "i2c_cpld 0x33" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}/new_device + + echo "done..." +} + +#Set FAN Tray LED +function _i2c_led_fan_tray_status_set { + echo "FAN Tray Status Setup" + #FAN Status get + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ]; then + FAN_TRAY=1 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=1 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ]; then + FAN_TRAY=2 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=2 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ]; then + FAN_TRAY=3 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=3 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi + + if [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + FAN_TRAY=4 + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + else + FAN_TRAY=4 + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_tray_led + fi +} + +#Set FAN LED +function _i2c_led_fan_status_set { + echo "FAN Status Setup" + #PSU Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN2_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan2_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN4_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan4_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN6_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan6_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + FAN8_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan8_alarm` + + if [ "${FAN1_ALARM}" == "0" ] && [ "${FAN2_ALARM}" == "0" ] \ + && [ "${FAN3_ALARM}" == "0" ] && [ "${FAN4_ALARM}" == "0" ] \ + && [ "${FAN5_ALARM}" == "0" ] && [ "${FAN6_ALARM}" == "0" ] \ + && [ "${FAN7_ALARM}" == "0" ] && [ "${FAN8_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_fan_led + fi +} + +#Set Power Supply LED +function _i2c_led_psu_status_set { + echo "PSU LED Status Setup" + + #PSU Status set + _i2c_psu_status + + #PSU1 Status + if [ "${psu1Exist}" == ${PSU_EXIST} ]; then + if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu1_led + fi + + #PSU2 Status + if [ "${psu2Exist}" == ${PSU_EXIST} ]; then + if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi + else + COLOR_LED="green" + ONOFF_LED="off" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + COLOR_LED="amber" + ONOFF_LED="on" + echo "${COLOR_LED} ${ONOFF_LED}" + _i2c_psu2_led + fi +} + +#LED Test +function _i2c_led_test { + echo "=========================================================" + echo "# Description: I2C LED TEST..." + echo "=========================================================" + #sys led (green) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x7F + _pause 'Check SYS LED green light and Press [Enter] key to continue...' + #sys led (amber) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xBF + _pause 'Check SYS LED amber light and Press [Enter] key to continue...' + + #FAN led (green) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xF7 + _pause 'Check FAN LED green light and Press [Enter] key to continue...' + #FAN led (amber) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFB + _pause 'Check FAN LED amber light and Press [Enter] key to continue...' + + #PSU2 led (green) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xDF + _pause 'Check PSU2 LED green light and Press [Enter] key to continue...' + #PSU2 led (amber) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xEF + _pause 'Check PSU2 LED amber light and Press [Enter] key to continue...' + + #PSU1 led (green) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFD + _pause 'Check PSU1 LED green light and Press [Enter] key to continue...' + #PSU1 led (amber) + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFE + _pause 'Check PSU1 LED amber light and Press [Enter] key to continue...' + + #Turn OFF All LED + i2cset -y ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + _pause 'Check turn off all LEDs and Press [Enter] key to continue...' + echo "done..." +} + +#Set QSFP Port variable +function _qsfp_port_i2c_var_set { + local port=$1 + case ${port} in + 1|2|3|4|5|6|7|8) + i2cbus=${NUM_MUX1_CHAN4_DEVICE} + regAddr=0x20 + dataAddr=0 + eeprombusbase=${NUM_MUX3_CHAN0_DEVICE} + gpioBase=240 + ;; + 9|10|11|12|13|14|15|16) + i2cbus=${NUM_MUX1_CHAN4_DEVICE} + regAddr=0x20 + dataAddr=1 + eeprombusbase=${NUM_MUX4_CHAN0_DEVICE} + gpioBase=240 + ;; + 17|18|19|20|21|22|23|24) + i2cbus=${NUM_MUX1_CHAN4_DEVICE} + regAddr=0x21 + dataAddr=0 + eeprombusbase=${NUM_MUX5_CHAN0_DEVICE} + gpioBase=$((224 - 16)) + ;; + 25|26|27|28|29|30|31|32) + i2cbus=${NUM_MUX1_CHAN4_DEVICE} + regAddr=0x21 + dataAddr=1 + eeprombusbase=${NUM_MUX6_CHAN0_DEVICE} + gpioBase=$((224 - 16)) + ;; + 33) + i2cbus=${NUM_MUX1_CHAN7_DEVICE} + regAddr=0x22 + dataAddr=0 + ;; + 34) + i2cbus=${NUM_MUX1_CHAN7_DEVICE} + regAddr=0x22 + dataAddr=1 + ;; + *) + echo "Please input 1~32" + ;; + esac +} + +#Set QSFP Port variable +function _qsfp_eeprom_var_set { + local port=$1 + eeprombusidx=$(( ${port} % 8)) + case $eeprombusidx in + 1) + eeprombus=$(( $eeprombusbase + 1 )) + eepromAddr=0x50 + ;; + 2) + eeprombus=$(( $eeprombusbase + 0 )) + eepromAddr=0x50 + ;; + 3) + eeprombus=$(( $eeprombusbase + 3 )) + eepromAddr=0x50 + ;; + 4) + eeprombus=$(( $eeprombusbase + 2 )) + eepromAddr=0x50 + ;; + 5) + eeprombus=$(( $eeprombusbase + 5 )) + eepromAddr=0x50 + ;; + 6) + eeprombus=$(( $eeprombusbase + 4 )) + eepromAddr=0x50 + ;; + 7) + eeprombus=$(( $eeprombusbase + 7 )) + eepromAddr=0x50 + ;; + 0) + eeprombus=$(( $eeprombusbase + 6 )) + eepromAddr=0x50 + ;; + esac +} + +#Get QSFP EEPROM Information +function _i2c_qsfp_eeprom_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + #status: 0 -> Down, 1 -> Up + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1) ^ 1)) ))/value` + echo $status + + if [ $status = 0 ]; then + exit + fi + + _qsfp_eeprom_var_set ${QSFP_PORT} + + cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C +} + +#Init QSFP EEPROM +function _i2c_qsfp_eeprom_init { + echo -n "QSFP EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-32 ports EEPROM + local i + for i in {1..32}; + do + _qsfp_port_i2c_var_set ${i} + + _qsfp_eeprom_var_set ${i} + + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/delete_device + fi + done + echo "DONE" +} + +#Init Main Board EEPROM +function _i2c_mb_eeprom_init { + echo -n "Main Board EEPROM INIT..." + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init 1-32 ports EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_MUX1_CHAN7_DEVICE}-0054 ]; then + echo "mb_eeprom 0x54" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN7_DEVICE}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/${NUM_MUX1_CHAN7_DEVICE}-0054 ]; then + echo "0x54" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN7_DEVICE}/delete_device + fi + echo "DONE" +} + +#PSU EEPROM init +function _i2c_psu_eeprom_init { + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Init..." + echo "=========================================================" + + ## modprobe eeprom + modprobe eeprom + ## PUS(0) EEPROM + echo "eeprom 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN6_DEVICE}/new_device + + ## PUS(1) EEPROM + echo "eeprom 0x50" > ${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX1_CHAN7_DEVICE}/new_device + + echo "done..." +} + +#get QSFP Status +function _i2c_qsfp_status_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + #status: 0 -> Down, 1 -> Up + status=`cat /sys/class/gpio/gpio$(( $(($gpioBase + (${QSFP_PORT} - 1) ^ 1)) ))/value` + echo "status=$status" +} + +#get QSFP Type +function _i2c_qsfp_type_get { + + _qsfp_port_i2c_var_set ${QSFP_PORT} + + _qsfp_eeprom_var_set ${QSFP_PORT} + + #Get QSFP EEPROM info + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom) + + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + + echo "identifier=$identifier" + echo "connector=$connector" + echo "transceiver=$transceiver" +} + +#Get PSU EEPROM Information +function _i2c_psu_eeprom_get { + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Get..." + echo "=========================================================" + + ## modprobe eeprom + modprobe eeprom + ## PUS(0) EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_MUX1_CHAN6_DEVICE}-0050/eeprom | hexdump -C + + ## PUS(1) EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_MUX1_CHAN7_DEVICE}-0050/eeprom | hexdump -C + + echo "done..." +} + +#Get MotherBoard EEPROM Information +function _i2c_mb_eeprom_get { + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get..." + echo "=========================================================" + + ## MB EEPROM + cat ${PATH_SYS_I2C_DEVICES}/${NUM_MUX1_CHAN7_DEVICE}-0054/eeprom | hexdump -C + echo "done..." +} + +#Set System Status LED +function _i2c_sys_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x80 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x80 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x40 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x40 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set PSU2 LED +function _i2c_psu2_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x20 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x20 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x10 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x10 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set FAN Tray LED +function _i2c_fan_tray_led { + case ${FAN_TRAY} in + 1) + i2cAddr=0x20 + ioPort=2 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 2) + i2cAddr=0x20 + ioPort=2 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + 3) + i2cAddr=0x20 + ioPort=3 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x01 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x02 + fi + ;; + 4) + i2cAddr=0x20 + ioPort=3 + if [ "${COLOR_LED}" == "green" ]; then + mask=0x10 + elif [ "${COLOR_LED}" == "amber" ]; then + mask=0x20 + fi + ;; + *) + echo "Please input 1~4" + exit + ;; + esac + + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m $mask -y -r ${NUM_MUX1_CHAN7_DEVICE} $i2cAddr $ioPort 0x33 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_MUX1_CHAN7_DEVICE} $i2cAddr $ioPort 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m $mask -y -r ${NUM_MUX1_CHAN7_DEVICE} $i2cAddr $ioPort 0x33 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m $mask -y -r ${NUM_MUX1_CHAN7_DEVICE} $i2cAddr $ioPort 0x00 + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set FAN LED +function _i2c_fan_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x08 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x08 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x04 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x04 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Set PSU1 LED +function _i2c_psu1_led { + if [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x02 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "green" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x02 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "on" ]; then + i2cset -m 0x01 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0x00 + elif [ "${COLOR_LED}" == "amber" ] && [ "${ONOFF_LED}" == "off" ]; then + i2cset -m 0x01 -y -r ${NUM_MUX1_CHAN7_DEVICE} 0x22 2 0xFF + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + echo "done..." +} + +#Get Board Version and Type +function _i2c_board_type_get { + boardType=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_board_type` + boardBuildRev=$((($boardType) & 0x03)) + boardHwRev=$((($boardType) >> 2 & 0x03)) + boardId=$((($boardType) >> 4)) + printf "BOARD_ID is 0x%02x, HW Rev %d, Build Rev %d\n" $boardId $boardHwRev $boardBuildRev + +} + +#Get CPLD Version +function _i2c_cpld_version { + cpldRev=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_version` + cpldRelease=$((($cpldRev) >> 6 & 0x01)) + cpldVersion=$((($cpldRev) & 0x3F)) + printf "CPLD is %s version(0:RD 1:Release), Revision is 0x%02x\n" $cpldRelease $cpldVersion + +} + +#Get PSU Status +function _i2c_psu_status { + psuPresent=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_pw_abs` + psu1Exist=$(($((($psuPresent) & 0x01))?0:1)) + psu2Exist=$(($((($psuPresent) & 0x02))?0:1)) + psuPwGood=`cat ${PATH_SYS_I2C_DEVICES}/0-0033/cpld_pw_good` + psu1PwGood=$(($((($psuPwGood) >> 3 & 0x01))?1:0)) + psu2PwGood=$(($((($psuPwGood) >> 3 & 0x02))?1:0)) + printf "PSU1 Exist:%d PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood + printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood +} + +#Get Front Sensor Temperature +function _i2c_front_temp { + #Front MAC + sensors | grep 'Front MAC Temp' -A 1 +} + +#Get Rear Sensor Temperature +function _i2c_rear_temp { + #Rear MAC + sensors | grep 'Rear MAC Temp' -A 1 +} + +#Increase read socket buffer for CoPP Test +function _config_rmem { + echo "109430400" > /proc/sys/net/core/rmem_max +} + +#Main Function +function _main { + tart_time_str=`date` + start_time_sec=$(date +%s) + + if [ "${EXEC_FUNC}" == "help" ]; then + _help + elif [ "${EXEC_FUNC}" == "i2c_init" ]; then + _i2c_init + elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then + _i2c_deinit + elif [ "${EXEC_FUNC}" == "i2c_temp_init" ]; then + _i2c_temp_init + elif [ "${EXEC_FUNC}" == "i2c_fan_init" ]; then + _i2c_fan_init + elif [ "${EXEC_FUNC}" == "i2c_volmon_init" ]; then + _i2c_volmon_init + elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then + _i2c_io_exp_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_init" ]; then + _i2c_gpio_init + elif [ "${EXEC_FUNC}" == "i2c_gpio_deinit" ]; then + _i2c_gpio_deinit + elif [ "${EXEC_FUNC}" == "i2c_led_test" ]; then + _i2c_led_test + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then + _i2c_mb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then + _i2c_psu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then + _i2c_qsfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_init" ]; then + _i2c_qsfp_eeprom_init ${QSFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_init" ]; then + _i2c_mb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then + _i2c_qsfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then + _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then + _i2c_led_psu_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then + _i2c_led_fan_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then + _i2c_led_fan_tray_status_set + elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then + _i2c_sys_led + elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then + _i2c_fan_led + elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then + _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then + _i2c_psu1_led + elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then + _i2c_psu2_led + elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then + _i2c_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_cpld_version" ]; then + _i2c_cpld_version + elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_front_temp" ]; then + _i2c_front_temp + elif [ "${EXEC_FUNC}" == "i2c_rear_temp" ]; then + _i2c_rear_temp + elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then + _i2c_init + _i2c_temp_init + _i2c_fan_init + _i2c_io_exp_init + _i2c_led_test + _i2c_psu_eeprom_get + _i2c_mb_eeprom_get + _i2c_board_type_get + _i2c_cpld_version + _i2c_psu_status + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "Start Time: ${start_time_str} (${start_time_sec})" + echo "End Time : ${end_time_str} (${end_time_sec})" + echo "Total Execution Time: ${diff_time} sec" + + echo "done!!!" +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/qsfp_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/qsfp_monitor.sh new file mode 100755 index 000000000000..249f179216a6 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/qsfp_monitor.sh @@ -0,0 +1,104 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=3 +I2C_UTILS="/usr/sbin/i2c_utils.sh" +QSFP_SI_SCRIPT="/usr/sbin/qsfp_si_cfg.sh" +QSFP_ARRAY=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0) + +#QSFP SI monitor +function _qsfp_si_monitor { + local i + local status + for i in {0..31}; + do + status=`${I2C_UTILS} i2c_qsfp_status_get $(expr $i + 1) | egrep '^status=.*$' | sed -e 's/status=//g'` + if [ "${status}" == "1" ]; then + _qsfp_type_check $i + fi + done +} + +#QSFP type +function _qsfp_type_check { + local port=$1 + local qsfp_type=`${I2C_UTILS} i2c_qsfp_type_get $(expr $port + 1)` + local identifier=`echo "$qsfp_type" | grep '^identifier=.*$' | sed -e 's/identifier=//g'` + if [ "${identifier}" == "11" ]; then + connector=`echo "$qsfp_type" | grep '^connector=.*$' | sed -e 's/connector=//g'` + case ${connector} in + 21|23) + #DAC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to DAC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} dac $port >/dev/null + fi + ;; + *) + #Optical + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to Optical" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} optical $port >/dev/null + fi + ;; + esac + fi +} + +#Docker exist check +function _docker_swss_check { + while true + do + # Check if syncd starts + result=`docker exec -i swss bash -c "echo -en \"SELECT 1\\nHLEN HIDDEN\" | redis-cli | sed -n 2p"` #TBD FIX ME + if [ "$result" == "3" ]; then + return + fi + sleep $INTERVAL + done +} + +#Docker exist check +function _qsfp_si_cfg_script_check { + + if [ -f ${QSFP_SI_SCRIPT} ] && [ -x ${QSFP_SI_SCRIPT} ]; then + echo "SI Script exists. Start monitor." + return + else + echo "SI Script not exist. Exit monitor." + exit + fi +} + +# main function +function _main { + #Check SI Script + _qsfp_si_cfg_script_check + #Check docker swss is running + _docker_swss_check + while true + do + _qsfp_si_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/qsfp_si_cfg.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/qsfp_si_cfg.sh new file mode 100755 index 000000000000..f2bf35bc7715 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/qsfp_si_cfg.sh @@ -0,0 +1,339 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +TYPE=${1} +PORT=${2} + +#QSFP Optical +function _qsfp_optical_si_set { + case ${PORT} in + 0) + bcmcmd "phy ce0 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x39;phy ce0 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x37;phy ce0 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0;phy ce0 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x39" + bcmcmd "phy ce0 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x37;phy ce0 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce0 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x35;phy ce0 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x37" + bcmcmd "phy ce0 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0;phy ce0 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce0 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce0 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + ;; + 1) + bcmcmd "phy ce1 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x3E;phy ce1 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x32;phy ce1 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0;phy ce1 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x38" + bcmcmd "phy ce1 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x38;phy ce1 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xE AMS_TX_DRIVERMODE=0x0;phy ce1 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x33;phy ce1 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3D" + bcmcmd "phy ce1 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0;phy ce1 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x35;phy ce1 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x3B;phy ce1 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xE AMS_TX_DRIVERMODE=0x0" + ;; + 2) + bcmcmd "phy ce2 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x35;phy ce2 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x3B;phy ce2 AMS_TX_CTL2r AMS_TX_AMP_CTL=0xB AMS_TX_DRIVERMODE=0x0" + ;; + 3) + bcmcmd "phy ce3 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x3B;phy ce3 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x35;phy ce3 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0;phy ce3 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x35" + bcmcmd "phy ce3 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x37;phy ce3 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0;phy ce3 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x35;phy ce3 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x37" + bcmcmd "phy ce3 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xB AMS_TX_DRIVERMODE=0x0;phy ce3 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x35;phy ce3 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x37;phy ce3 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xB AMS_TX_DRIVERMODE=0x0" + ;; + 4) + bcmcmd "phy ce4 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x30;phy ce4 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x40;phy ce4 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce4 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x33" + bcmcmd "phy ce4 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3D;phy ce4 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce4 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce4 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce4 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce4 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce4 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce4 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0" + ;; + 5) + bcmcmd "phy ce5 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x30;phy ce5 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x40;phy ce5 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce5 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x35" + bcmcmd "phy ce5 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3B;phy ce5 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0;phy ce5 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce5 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce5 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce5 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce5 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce5 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0" + ;; + 6) + bcmcmd "phy ce6 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x30;phy ce6 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x40;phy ce6 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce6 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x36" + bcmcmd "phy ce6 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3A;phy ce6 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0;phy ce6 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce6 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce6 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce6 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce6 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce6 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0" + ;; + 7) + bcmcmd "phy ce7 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x30;phy ce7 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x40;phy ce7 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce7 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30" + bcmcmd "phy ce7 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce7 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce7 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce7 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce7 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce7 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce7 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce7 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + ;; + 8) + bcmcmd "phy ce8 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x25;phy ce8 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x4B;phy ce8 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce8 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x2C" + bcmcmd "phy ce8 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x44;phy ce8 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0;phy ce8 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x25;phy ce8 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x4B" + bcmcmd "phy ce8 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce8 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x25;phy ce8 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x4B;phy ce8 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + ;; + 9) + bcmcmd "phy ce9 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x25;phy ce9 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x4B;phy ce9 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce9 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x2B" + bcmcmd "phy ce9 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x45;phy ce9 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0;phy ce9 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x25;phy ce9 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x4B" + bcmcmd "phy ce9 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce9 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x25;phy ce9 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x4B;phy ce9 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + ;; + 10) + bcmcmd "phy ce10 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x25;phy ce10 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x4B;phy ce10 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce10 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x2B" + bcmcmd "phy ce10 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x45;phy ce10 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x7 AMS_TX_DRIVERMODE=0x0;phy ce10 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x25;phy ce10 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x4B" + bcmcmd "phy ce10 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce10 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x25;phy ce10 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x4B;phy ce10 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + ;; + 11) + bcmcmd "phy ce11 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x25;phy ce11 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x4B;phy ce11 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce11 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x2C" + bcmcmd "phy ce11 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x44;phy ce11 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce11 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x25;phy ce11 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x4B" + bcmcmd "phy ce11 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce11 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x25;phy ce11 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x4B;phy ce11 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + ;; + 12) + bcmcmd "phy ce12 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x25;phy ce12 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x4B;phy ce12 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce12 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x25" + bcmcmd "phy ce12 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x4B;phy ce12 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x5 AMS_TX_DRIVERMODE=0x0;phy ce12 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x25;phy ce12 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x4B" + bcmcmd "phy ce12 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce12 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x25;phy ce12 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x4B;phy ce12 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + ;; + 13) + bcmcmd "phy ce13 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x25;phy ce13 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x4B;phy ce13 AMS_TX_CTL2r AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + ;; + 14) + bcmcmd "phy ce14 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x25;phy ce14 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x4B;phy ce14 AMS_TX_CTL2r AMS_TX_AMP_CTL=0x7 AMS_TX_DRIVERMODE=0x0" + ;; + 15) + bcmcmd "phy ce15 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x25;phy ce15 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x4B;phy ce15 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x7 AMS_TX_DRIVERMODE=0x0;phy ce15 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x25" + bcmcmd "phy ce15 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x4B;phy ce15 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x5 AMS_TX_DRIVERMODE=0x0;phy ce15 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x25;phy ce15 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x4B" + bcmcmd "phy ce15 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x7 AMS_TX_DRIVERMODE=0x0;phy ce15 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x25;phy ce15 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x4B;phy ce15 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x7 AMS_TX_DRIVERMODE=0x0" + ;; + 16) + bcmcmd "phy ce16 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x27;phy ce16 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x49;phy ce16 AMS_TX_CTL2r AMS_TX_AMP_CTL=0x4 AMS_TX_DRIVERMODE=0x0" + ;; + 17) + bcmcmd "phy ce17 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x25;phy ce17 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x4B;phy ce17 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce17 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30" + bcmcmd "phy ce17 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce17 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0;phy ce17 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce17 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce17 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0;phy ce17 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce17 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40;phy ce17 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + ;; + 18) + bcmcmd "phy ce18 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x20;phy ce18 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x50;phy ce18 AMS_TX_CTL2r AMS_TX_AMP_CTL=0x2 AMS_TX_DRIVERMODE=0x0" + ;; + 19) + bcmcmd "phy ce19 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x20;phy ce19 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x50;phy ce19 AMS_TX_CTL2r AMS_TX_AMP_CTL=0x2 AMS_TX_DRIVERMODE=0x0" + ;; + 20) + bcmcmd "phy ce20 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x20;phy ce20 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x50;phy ce20 AMS_TX_CTL2r AMS_TX_AMP_CTL=0x2 AMS_TX_DRIVERMODE=0x0" + ;; + 21) + bcmcmd "phy ce21 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x17;phy ce21 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x59;phy ce21 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x4 AMS_TX_DRIVERMODE=0x0;phy ce21 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x17" + bcmcmd "phy ce21 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x59;phy ce21 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x2 AMS_TX_DRIVERMODE=0x0;phy ce21 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x20;phy ce21 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x50" + bcmcmd "phy ce21 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x2 AMS_TX_DRIVERMODE=0x0;phy ce21 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x20;phy ce21 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x50;phy ce21 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x2 AMS_TX_DRIVERMODE=0x0" + ;; + 22) + bcmcmd "phy ce22 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x25;phy ce22 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x4B;phy ce22 AMS_TX_CTL2r AMS_TX_AMP_CTL=0x7 AMS_TX_DRIVERMODE=0x0" + ;; + 23) + bcmcmd "phy ce23 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x25;phy ce23 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x4B;phy ce23 AMS_TX_CTL2r AMS_TX_AMP_CTL=0x7 AMS_TX_DRIVERMODE=0x0" + ;; + 24) + bcmcmd "phy ce24 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x23;phy ce24 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x4D;phy ce24 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce24 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x29" + bcmcmd "phy ce24 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x47;phy ce24 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce24 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x29;phy ce24 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x47" + bcmcmd "phy ce24 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x4 AMS_TX_DRIVERMODE=0x0;phy ce24 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x29;phy ce24 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x47;phy ce24 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x4 AMS_TX_DRIVERMODE=0x0" + ;; + 25) + bcmcmd "phy ce25 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x29;phy ce25 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x47;phy ce25 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce25 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x29" + bcmcmd "phy ce25 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x47;phy ce25 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce25 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x29;phy ce25 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x47" + bcmcmd "phy ce25 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x4 AMS_TX_DRIVERMODE=0x0;phy ce25 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x29;phy ce25 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x47;phy ce25 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x4 AMS_TX_DRIVERMODE=0x0" + ;; + 26) + bcmcmd "phy ce26 CL93N72_UT_CTL2r CL93N72_TXFIR_POST=0x30;phy ce26 CL93N72_UT_CTL3r CL93N72_TXFIR_MAIN=0x40;phy ce26 AMS_TX_CTL2r AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0" + ;; + 27) + bcmcmd "phy ce27 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x30;phy ce27 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x40;phy ce27 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0;phy ce27 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30" + bcmcmd "phy ce27 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce27 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0;phy ce27 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce27 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce27 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xB AMS_TX_DRIVERMODE=0x0;phy ce27 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce27 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce27 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0" + ;; + 28) + bcmcmd "phy ce28 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x30;phy ce28 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x40;phy ce28 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce28 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30" + bcmcmd "phy ce28 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce28 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce28 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce28 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce28 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0;phy ce28 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce28 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce28 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0" + ;; + 29) + bcmcmd "phy ce29 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x30;phy ce29 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x40;phy ce29 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce29 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30" + bcmcmd "phy ce29 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce29 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0;phy ce29 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce29 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce29 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0;phy ce29 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce29 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce29 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0" + ;; + 30) + bcmcmd "phy ce30 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x30;phy ce30 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x40;phy ce30 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce30 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30" + bcmcmd "phy ce30 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce30 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0;phy ce30 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce30 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce30 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0;phy ce30 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce30 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce30 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0" + ;; + 31) + bcmcmd "phy ce31 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x39;phy ce31 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x37;phy ce31 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0;phy ce31 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x39" + bcmcmd "phy ce31 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x37;phy ce31 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0;phy ce31 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x30;phy ce31 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x40" + bcmcmd "phy ce31 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0;phy ce31 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce31 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce31 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + ;; + *) + echo "Unknown Port" + return + ;; + esac +} + +function _qsfp_dac_si_set { + case ${PORT} in + 0) + bcmcmd "phy ce0 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce0 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce0 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce0 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce0 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x1C;phy ce0 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x20;phy ce0 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x34;phy ce0 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce0 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce0 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce0 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce0 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce0 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x18;phy ce0 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x24;phy ce0 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x34;phy ce0 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + ;; + 1) + bcmcmd "phy ce1 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce1 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce1 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce1 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce1 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x1C;phy ce1 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x20;phy ce1 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x34;phy ce1 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce1 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce1 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce1 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce1 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce1 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x1C;phy ce1 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x20;phy ce1 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x34;phy ce1 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + ;; + 2) + bcmcmd "phy ce2 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce2 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce2 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce2 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce2 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x18;phy ce2 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x24;phy ce2 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x34;phy ce2 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xD AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce2 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce2 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce2 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce2 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce2 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x14;phy ce2 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x20;phy ce2 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x3C;phy ce2 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xD AMS_TX_DRIVERMODE=0x0" + ;; + 3) + bcmcmd "phy ce3 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce3 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce3 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce3 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce3 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x14;phy ce3 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x20;phy ce3 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3C;phy ce3 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xD AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce3 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce3 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce3 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce3 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce3 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x18;phy ce3 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x24;phy ce3 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x34;phy ce3 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xD AMS_TX_DRIVERMODE=0x0" + ;; + 4) + bcmcmd "phy ce4 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce4 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce4 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce4 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce4 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x0;phy ce4 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x33;phy ce4 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3D;phy ce4 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xB AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce4 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce4 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce4 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce4 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce4 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x0;phy ce4 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce4 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce4 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0" + ;; + 5) + bcmcmd "phy ce5 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce5 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce5 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce5 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce5 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x0;phy ce5 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30;phy ce5 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce5 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xB AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce5 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce5 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce5 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce5 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce5 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x0;phy ce5 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce5 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce5 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0" + ;; + 6) + bcmcmd "phy ce6 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce6 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce6 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce6 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce6 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x0;phy ce6 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x36;phy ce6 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3A;phy ce6 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce6 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce6 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce6 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce6 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce6 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x0;phy ce6 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce6 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce6 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0" + ;; + 7) + bcmcmd "phy ce7 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce7 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce7 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce7 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce7 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x0;phy ce7 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30;phy ce7 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce7 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce7 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce7 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce7 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce7 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce7 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x0;phy ce7 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce7 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce7 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + ;; + 8) + ;; + 9) + ;; + 10) + ;; + 11) + ;; + 12) + ;; + 13) + ;; + 14) + ;; + 15) + ;; + 16) + ;; + 17) + ;; + 18) + ;; + 19) + ;; + 20) + ;; + 21) + ;; + 22) + ;; + 23) + ;; + 24) + bcmcmd "phy ce24 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce24 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce24 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce24 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce24 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x0;phy ce24 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x29;phy ce24 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x47;phy ce24 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce24 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0X1F;phy ce24 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce24 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce24 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce24 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x0;phy ce24 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x29;phy ce24 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x47;phy ce24 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x4 AMS_TX_DRIVERMODE=0x0" + ;; + 25) + bcmcmd "phy ce25 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce25 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce25 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce25 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce25 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x0;phy ce25 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x29;phy ce25 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x47;phy ce25 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x8 AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce25 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce25 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce25 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce25 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce25 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x0;phy ce25 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x29;phy ce25 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x47;phy ce25 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x4 AMS_TX_DRIVERMODE=0x0" + ;; + 26) + bcmcmd "phy ce26 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce26 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce26 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce26 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce26 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x0;phy ce26 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30;phy ce26 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce26 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xA AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce26 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce26 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce26 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce26 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce26 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x0;phy ce26 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce26 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce26 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0" + ;; + 27) + bcmcmd "phy ce27 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce27 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce27 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce27 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce27 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x0;phy ce27 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x30;phy ce27 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x40;phy ce27 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce27 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce27 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce27 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce27 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce27 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x0;phy ce27 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x30;phy ce27 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x40;phy ce27 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0x9 AMS_TX_DRIVERMODE=0x0" + ;; + 28) + bcmcmd "phy ce28 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce28 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce28 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce28 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce28 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x10;phy ce28 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x18;phy ce28 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3C;phy ce28 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce28 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce28 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce28 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce28 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce28 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x10;phy ce28 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x1C;phy ce28 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x3C;phy ce28 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0" + ;; + 29) + bcmcmd "phy ce29 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce29 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce29 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce29 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce29 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x10;phy ce29 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x20;phy ce29 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3C;phy ce29 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce29 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce29 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce29 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce29 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce29 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x10;phy ce29 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x20;phy ce29 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x3C;phy ce29 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0" + ;; + 30) + bcmcmd "phy ce30 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce30 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce30 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce30 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce30 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x10;phy ce30 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x24;phy ce30 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3C;phy ce30 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce30 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce30 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce30 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce30 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce30 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x8;phy ce30 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x24;phy ce30 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x3C;phy ce30 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0" + ;; + 31) + bcmcmd "phy ce31 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_PRE=0x1F;phy ce31 CL93N72_UT_CTL2r.0 CL93N72_TXFIR_POST=0x15;phy ce31 CL93N72_UT_CTL3r.0 CL93N72_TXFIR_MAIN=0x3C;phy ce31 AMS_TX_CTL2r.0 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce31 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_PRE=0x10;phy ce31 CL93N72_UT_CTL2r.1 CL93N72_TXFIR_POST=0x24;phy ce31 CL93N72_UT_CTL3r.1 CL93N72_TXFIR_MAIN=0x3C;phy ce31 AMS_TX_CTL2r.1 AMS_TX_AMP_CTL=0xC AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce31 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_PRE=0x1F;phy ce31 CL93N72_UT_CTL2r.2 CL93N72_TXFIR_POST=0x15;phy ce31 CL93N72_UT_CTL3r.2 CL93N72_TXFIR_MAIN=0x3C;phy ce31 AMS_TX_CTL2r.2 AMS_TX_AMP_CTL=0xF AMS_TX_DRIVERMODE=0x0" + bcmcmd "phy ce31 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_PRE=0x14;phy ce31 CL93N72_UT_CTL2r.3 CL93N72_TXFIR_POST=0x20;phy ce31 CL93N72_UT_CTL3r.3 CL93N72_TXFIR_MAIN=0x3C;phy ce31 AMS_TX_CTL2r.3 AMS_TX_AMP_CTL=0xE AMS_TX_DRIVERMODE=0x0" + ;; + *) + echo "Unknown Port" + return + ;; + esac +} + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} optical [0-31]" + echo " : ${0} dac [0-31]" + echo "----------------------------------------------------" +} + +#Main Function +function _main { + + if [ "${TYPE}" == "help" ]; then + _help + elif [ "${TYPE}" == "optical" ]; then + _qsfp_optical_si_set + elif [ "${TYPE}" == "dac" ]; then + _qsfp_dac_si_set + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/s9100_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/s9100_monitor.sh new file mode 100755 index 000000000000..974da6d5001f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9100/utils/s9100_monitor.sh @@ -0,0 +1,39 @@ +#!/bin/bash +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=5 +I2C_UTILS="/usr/sbin/i2c_utils.sh" + + +# LED status monitor +function _led_monitor { + ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_psu_status_set >/dev/null + ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null +} + +# main function +function _main { + while true + do + _led_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/README.md b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/README.md new file mode 100644 index 000000000000..940d15f497c9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/README.md @@ -0,0 +1,184 @@ +# Ingrasys S9200-64X Platform Driver for SONiC + +Copyright (C) 2016 Ingrasys, Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 3 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + +## Licensing terms + +The Licensing terms of the files within this project is split 2 parts. +The Linux kernel is released under the GNU General Public License version 2. +All other code is released under the GNU General Public License version 3. +Please see the LICENSE file for copies of both licenses. + +## Contents of this package + + - service/ + > Service config files for platform initialization and monitoring + - utils/ + > Scripts useful during platform bringup and sysfs function + - conf/ + > Platform configure files. + +## Kernel modules and drivers + +The driver for interacting with Ingrasys S9200-64X is contained in the I2C +kernel module and initialization script. The initialization script loads +the modules in the correct order. It has been built and tested against +the Linux 3.16 kernel. + +The initialization script will modprobe the needed modules, navigate to the +module's device directory in sysfs, and write configuration data to +the kernel module. + +### IGB + +This is OOB Ports on front panel for management plane. + +The IGB module must be loaded first on Ingrasys S9200-64X platform. + +### I2C i801 + +The I2C i801 on Ingrasys S9200-64X can be found in +`/sys/bus/i2c/devices/i2c-0/` + +This is I2C bus for Clock Gen, DIMM channel and digital potentiometers. + +The i801 module must be loaded second on Ingrasys S9200-64X. + +### I2C iSMT + +The I2C iSMT module on S9200-64X can be found in +`/sys/bus/i2c/devices/i2c-1/` + +This is I2C bus for CPLD, HWM, power controller and I2C Switches. + +The i801 module must be loaded third on Ingrasys S9200-64X. + +### I2C PCA9548 +The PCA9548 module on S9200-64X can be found in +`/sys/bus/i2c/devices/i2c-2/` , `/sys/bus/i2c/devices/i2c-3/`, +`/sys/bus/i2c/devices/i2c-4/`, `/sys/bus/i2c/devices/i2c-5/`, +`/sys/bus/i2c/devices/i2c-6/`, `/sys/bus/i2c/devices/i2c-7/`, +`/sys/bus/i2c/devices/i2c-8/`, `/sys/bus/i2c/devices/i2c-9/`. + +The pca9548 module for zQSFP module get/set functions, PSU information, +fan status and EEPROM. + +## Hardware components + +The hardware components are initialized in the init script on S9200-64X. +The following describes manual initialization as well as interaction. +The examples below are just for Ingrasys S9200-64X platform. + +### Hardware initialization + +When the sonic-platform-ingrasys-s9200-64x package is installed on the S9200-64X, +it is automatically initialized. If you want to manual initialization, the +utility command usage as follows: +``` + i2c_utils.sh i2c_init +``` + +### EEPROM + +The EEPROM is including the board SKU, model name, vendor name, serial number, +and other information can be accessed with the specific eeprom kernel module. +After using `modprobe eeprom_mb` to detect the eeprom, it will show up in sysfs. + +The hexdump utility can be used to decode the raw output of the EEPROM. +For example, +``` + bash# echo "mb_eeprom 0x54" > /sys/bus/i2c/devices/i2c-9/new_device + bash# cat /sys/bus/i2c/drivers/mb_eeprom/9-0054/eeprom | hexdump -C +``` + +### Front panel LEDs + +LEDs can be setup on/off by using i2c utility `/usr/sbin/i2c_utils.sh`. +Utility function command usage as follows: + +``` +Status LED: + i2c_utils.sh i2c_sys_led green|amber + +Fan status LED: + i2c_utils.sh i2c_fan_led green|amber + +PSU1 status LED: + i2c_utils.sh i2c_psu1_led green|amber + +PSU2 status LED: + i2c_utils.sh i2c_psu2_led green|amber + +``` +QSFP Module Port LEDs control by ASIC library. + + +### Fan speed + +Fan speed are controlled by the w83795 kernel module. +It can be found in `/sys/class/hwmon/hwmon5/device/`. +If they were compiled as modules, you will need to modprobe w83795 for +their sysfs entries to show up. Each fan has an `fan_input` file +for reading the fan speed. And `pwm2` setting fan1/fan3/fan5/fan7. + +There is docker-platform-monitor container installed fancontrol package that can +automatic control platform fan speed. + + +### Temperature sensors + +Temperature sensors are controlled by the w83795 kernel +module. It can be found in `/sys/class/hwmon/hwmon5/device/`. +If they were compiled as modules, then you will need to modprobe w83795 for +their sysfs entries to show up. +`temp1_input` is front MAC temperature sensor. `temp2_input` is rear MAC +temperature sensor. + +There is docker-platform-monitor container installed lm-sensors package that can +monitor platform temperature. And `sensors` command can show each +temperature sensors status. + +### Power supplies + +Power supplies status and its EEPROM info can be used i2c utility +`/usr/sbin/i2c_utils.sh` to get. +The usage as follows: +``` +PSU EEPROM: + i2c_utils.sh i2c_psu_eeprom_get + hexdump -C psu0.rom + hexdump -C psu1.rom + +PSU Status: + i2c_utils.sh i2c_psu_status +``` + +### QSFPs +QSFP modules are managed by the pca9548 kernel driver. +The i2c utility `/usr/sbin/i2c_utils.sh` can be used to get status and +module EEPROM informations. +The usage as follows: +``` +QSFP EEPROM: + i2c_utils.sh i2c_qsfp_eeprom_get [1-64] + +QSFP Insert Event: + i2c_utils.sh i2c_qsfp_eeprom_get [1-64] + 0 => not insert + 1 => inserted +``` + diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/Makefile b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/Makefile new file mode 100755 index 000000000000..1a9e4e314e8e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/Makefile @@ -0,0 +1,3 @@ +obj-m := eeprom_mb.o +obj-m += cpld.o +obj-m += ingrasys_s9200_64x_psu.o diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/cpld.c b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/cpld.c new file mode 100755 index 000000000000..7b16f5d3e321 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/cpld.c @@ -0,0 +1,498 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define S9200_MUX_BASE_NR 0 +#define CPLD_DEVICE_NUM 5 + +/* CPLD registers */ +#define CPLD_REG_REV 0x01 +#define CPLD_REG_ID 0x02 +#define CPLD_REG_10G_MUX 0x41 + +/* QSFP signal bit in register */ +#define BIT_RST 0 +#define BIT_LPM 2 +#define BIT_INT 0 +#define BIT_ABS 1 + +static void device_release(struct device *dev) +{ + return; +} + +/* + * S9200 CPLD register addresses + */ +static const int int_abs_reg[CPLD_DEVICE_NUM][2]= { + {0x20, 0x2B}, + {0x20, 0x2C}, + {0x20, 0x2C}, + {0x20, 0x2C}, + {0x20, 0x2C} +}; + +static const int rst_lp_reg[CPLD_DEVICE_NUM][2]= { + {0x30, 0x3B}, + {0x30, 0x3C}, + {0x30, 0x3C}, + {0x30, 0x3C}, + {0x30, 0x3C} +}; + +/* + * S9200 CPLD + */ + +enum cpld_type { + cpld_1, + cpld_2, + cpld_3, + cpld_4, + cpld_5, +}; + +enum qsfp_signal { + sig_int, + sig_abs, + sig_rst, + sig_lpm +}; + +struct cpld_platform_data { + int reg_addr; + struct i2c_client *client; +}; + +static struct cpld_platform_data s9200_cpld_platform_data[] = { + [cpld_1] = { + .reg_addr = 0x33, + }, + + [cpld_2] = { + .reg_addr = 0x33, + }, + + [cpld_3] = { + .reg_addr = 0x33, + }, + + [cpld_4] = { + .reg_addr = 0x33, + }, + + [cpld_5] = { + .reg_addr = 0x33, + }, +}; + +static struct platform_device s9200_cpld = { + .name = "ingrasys-s9200-cpld", + .id = 0, + .dev = { + .platform_data = s9200_cpld_platform_data, + .release = device_release + }, +}; + +/* + * S9200 I2C DEVICES + */ + +struct i2c_device_platform_data { + int parent; + struct i2c_board_info info; + struct i2c_client *client; +}; + +/* module_platform_driver */ +static ssize_t get_cpld_reg(struct device *dev, struct device_attribute *devattr, char *buf, int signal) +{ + int ret; + u64 data = 0; + u64 shift = 0; + int i = 0; + int j = 0; + int port = 0; + int bit = 0; + int bit_mask = 0; + int (*reg)[CPLD_DEVICE_NUM][2]; + struct cpld_platform_data *pdata = NULL; + + pdata = dev->platform_data; + + switch(signal) { + case sig_int: + bit = BIT_INT; + reg = (typeof(reg)) &int_abs_reg; + break; + case sig_abs: + bit = BIT_ABS; + reg = (typeof(reg)) &int_abs_reg; + break; + case sig_rst: + bit = BIT_RST; + reg = (typeof(reg)) &rst_lp_reg; + break; + case sig_lpm: + bit = BIT_LPM; + reg = (typeof(reg)) &rst_lp_reg; + break; + default: + return sprintf(buf, "na"); + } + bit_mask = 0x1 << bit; + + for (i=0; i> bit)) << port; + data |= shift; + port++; + } + } + + return sprintf(buf, "0x%016llx\n", data); +} + +static ssize_t set_cpld_reg(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count, int signal) +{ + unsigned long data; + int err; + struct cpld_platform_data *pdata = dev->platform_data; + u8 current_reg_val = 0; + u8 new_reg_val = 0; + int value; + int i = 0; + int j = 0; + int port = 0; + int ret = 0; + int bit = 0; + int (*reg)[CPLD_DEVICE_NUM][2]; + + err = kstrtoul(buf, 16, &data); + if (err) + return err; + + switch(signal) { + case sig_int: + bit = BIT_INT; + reg = (typeof(reg)) &int_abs_reg; + break; + case sig_abs: + bit = BIT_ABS; + reg = (typeof(reg)) &int_abs_reg; + break; + case sig_rst: + bit = BIT_RST; + reg = (typeof(reg)) &rst_lp_reg; + break; + case sig_lpm: + bit = BIT_LPM; + reg = (typeof(reg)) &rst_lp_reg; + break; + default: + return sprintf(buf, "na"); + } + + for (i=0; i> port) & 0x1; + + //set value on bit N of new_reg_val + if (value > 0) { + new_reg_val = current_reg_val | (u8) (0x1 << bit); + } else { + new_reg_val = current_reg_val & (u8) ~(0x1 << bit); + } + //write reg value if changed + if (current_reg_val != new_reg_val) { + ret = i2c_smbus_write_byte_data(pdata[i].client, j, + (u8)(new_reg_val)); + if (ret < 0){ + return ret; + } + } + port++; + } + } + + return count; +} + +static ssize_t get_lpmode(struct device *dev, struct device_attribute *devattr, char *buf) +{ + return get_cpld_reg(dev, devattr, buf, sig_lpm); +} + +static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + return set_cpld_reg(dev, devattr, buf, count, sig_lpm); +} + +static ssize_t get_reset(struct device *dev, struct device_attribute *devattr, char *buf) +{ + return get_cpld_reg(dev, devattr, buf, sig_rst); +} + +static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + return set_cpld_reg(dev, devattr, buf, count, sig_rst); +} + +static ssize_t get_modprs(struct device *dev, struct device_attribute *devattr, char *buf) +{ + return get_cpld_reg(dev, devattr, buf, sig_abs); +} + +static ssize_t get_int(struct device *dev, struct device_attribute *devattr, char *buf) +{ + return get_cpld_reg(dev, devattr, buf, sig_int); +} + +static ssize_t get_cpld_version(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int i = 0; + int cnt = 0; + u8 reg_val_rev[CPLD_DEVICE_NUM]; + u8 reg_val_id[CPLD_DEVICE_NUM]; + + struct cpld_platform_data *pdata = dev->platform_data; + + //get reg value + for (i=0; i> 6 & 0x1, + reg_val_id[i] & 0x7); + } + + return cnt; +} + +static ssize_t set_10g_mux(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + u8 data; + u8 current_reg_val = 0; + u8 new_reg_val = 0; + int cpld_dev_num=cpld_1; + int reg_offset=CPLD_REG_10G_MUX; + int err; + struct cpld_platform_data *pdata = dev->platform_data; + int value; + int i = 0; + int port = 0; + int ret = 0; + int bit = 0; + + err = kstrtou8(buf, 16, &new_reg_val); + if (err) + return err; + + //read reg value + current_reg_val = i2c_smbus_read_byte_data(pdata[cpld_dev_num].client, reg_offset); + if (current_reg_val < 0) { + return current_reg_val; + } + + //write reg value if changed + if (current_reg_val != new_reg_val) { + ret = i2c_smbus_write_byte_data(pdata[cpld_dev_num].client, reg_offset, + (u8)(new_reg_val)); + if (ret < 0){ + return ret; + } + } + + return count; +} + +static ssize_t get_10g_mux(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int cpld_dev_num=cpld_1; + int reg_offset=CPLD_REG_10G_MUX; + u8 reg_val=0; + struct cpld_platform_data *pdata = dev->platform_data; + + //read 10G mux register + reg_val = i2c_smbus_read_byte_data(pdata[cpld_dev_num].client, reg_offset); + if (reg_val < 0) { + return sprintf(buf, "na"); + } + + return sprintf(buf, "0x%x\n", reg_val); +} + +static DEVICE_ATTR(qsfp_int, S_IRUGO, get_int, NULL); +static DEVICE_ATTR(qsfp_modprs, S_IRUGO, get_modprs, NULL); +static DEVICE_ATTR(qsfp_lpmode, S_IRUGO | S_IWUSR, get_lpmode, set_lpmode); +static DEVICE_ATTR(qsfp_reset, S_IRUGO | S_IWUSR, get_reset, set_reset); +static DEVICE_ATTR(cpld_version, S_IRUGO, get_cpld_version, NULL); +static DEVICE_ATTR(cpld_10g_mux, S_IRUGO | S_IWUSR, get_10g_mux, set_10g_mux); + +static struct attribute *s9200_cpld_attrs[] = { + &dev_attr_qsfp_int.attr, + &dev_attr_qsfp_lpmode.attr, + &dev_attr_qsfp_reset.attr, + &dev_attr_qsfp_modprs.attr, + &dev_attr_cpld_version.attr, + &dev_attr_cpld_10g_mux.attr, + NULL, +}; + +static struct attribute_group s9200_cpld_attr_grp = { + .attrs = s9200_cpld_attrs, +}; + +static int __init cpld_probe(struct platform_device *pdev) +{ + struct cpld_platform_data *pdata; + struct i2c_adapter *parent[CPLD_DEVICE_NUM]; + int i; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + for (i = 0; i < CPLD_DEVICE_NUM; i++) { + parent[i] = i2c_get_adapter(S9200_MUX_BASE_NR + i + 1); + if (!parent[i]) { + printk(KERN_WARNING "Parent adapter (%d) not found\n", + S9200_MUX_BASE_NR + i + 1); + return -ENODEV; + } + pdata[i].client = i2c_new_dummy(parent[i], pdata[i].reg_addr); + if (!pdata[i].client) { + printk(KERN_WARNING "Fail to create dummy i2c client for addr %d\n", pdata[i].reg_addr); + goto error; + } + } + + ret = sysfs_create_group(&pdev->dev.kobj, &s9200_cpld_attr_grp); + if (ret) + goto error; + + return 0; + +error: + i2c_put_adapter(parent[i]); + i--; + for (; i >= 0; i--) { + if (pdata[i].client) { + i2c_unregister_device(pdata[i].client); + i2c_put_adapter(parent[i]); + } + } + + return -ENODEV; +} + +static int __exit cpld_remove(struct platform_device *pdev) +{ + int i; + struct i2c_adapter *parent = NULL; + struct cpld_platform_data *pdata = pdev->dev.platform_data; + + sysfs_remove_group(&pdev->dev.kobj, &s9200_cpld_attr_grp); + + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + } else { + for (i = 0; i < CPLD_DEVICE_NUM; i++) { + if (pdata[i].client) { + parent = (pdata[i].client)->adapter; + i2c_unregister_device(pdata[i].client); + i2c_put_adapter(parent); + } + } + } + + return 0; +} + +static struct platform_driver cpld_driver = { + .probe = cpld_probe, + .remove = __exit_p(cpld_remove), + .driver = { + .owner = THIS_MODULE, + .name = "ingrasys-s9200-cpld", + }, +}; + +static int __init ingrasys_s9200_platform_init(void) +{ + int ret = 0; + + printk("ingrasysl_s9200_platform module initialization\n"); + + mdelay(10000); + + ret = platform_driver_register(&cpld_driver); + if (ret) { + printk(KERN_WARNING "Fail to register cpld driver\n"); + goto error_cpld_driver; + } + ret = platform_device_register(&s9200_cpld); + if (ret) { + printk(KERN_WARNING "Fail to create cpld device\n"); + goto error_cpld; + } + + return 0; + +error_cpld: + platform_driver_unregister(&cpld_driver); +error_cpld_driver: + return ret; +} + +static void __exit ingrasys_s9200_platform_exit(void) +{ + platform_device_unregister(&s9200_cpld); + platform_driver_unregister(&cpld_driver); +} + +module_init(ingrasys_s9200_platform_init); +module_exit(ingrasys_s9200_platform_exit); + +MODULE_DESCRIPTION("Ingrasys S9200 Platform Support"); +MODULE_AUTHOR("Jason Tsai "); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/eeprom_mb.c b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/eeprom_mb.c new file mode 100755 index 000000000000..1cdb26658f5a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/eeprom_mb.c @@ -0,0 +1,267 @@ +/* + * Copyright (C) 1998, 1999 Frodo Looijaard and + * Philip Edelbrock + * Copyright (C) 2003 Greg Kroah-Hartman + * Copyright (C) 2003 IBM Corp. + * Copyright (C) 2004 Jean Delvare + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* enable dev_dbg print out */ +//#define DEBUG + +#include +#include +#include +#include +#include +#include +#include + +/* Addresses to scan */ +static const unsigned short normal_i2c[] = { /*0x50, 0x51, 0x52, 0x53, 0x54, + 0x55, 0x56, 0x57,*/ I2C_CLIENT_END }; + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 512 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void mb_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, (u8)((addr >> 8) & 0xFF), (u8)(addr & 0xFF)); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t mb_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + mb_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static ssize_t mb_eeprom_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + int ret; + int i; + u8 cmd; + u16 value16; + + dev_dbg(&client->dev, "mb_eeprom_write off=%d, count=%d\n", (int)off, (int)count); + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + mutex_lock(&data->update_lock); + + for(i=0; i < count; i++) { + /* write command */ + cmd = (off >> 8) & 0xff; + value16 = off & 0xff; + value16 |= buf[i] << 8; + ret = i2c_smbus_write_word_data(client, cmd, value16); + + if (ret < 0) { + dev_err(&client->dev, "write address failed at %d \n", (int)off); + goto exit; + } + + off++; + + /* need to wait for write complete */ + udelay(10000); + } +exit: + mutex_unlock(&data->update_lock); + /* force to update client when reading */ + for(i=0; i < SLICE_NUM; i++) { + data->last_updated[i] = 0; + } + + return count; +} + +static struct bin_attribute mb_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO | S_IWUSR, + }, + .size = EEPROM_SIZE, + .read = mb_eeprom_read, + .write = mb_eeprom_write, +}; + +/* Return 0 if detection is successful, -ENODEV otherwise */ +static int mb_eeprom_detect(struct i2c_client *client, struct i2c_board_info *info) +{ + struct i2c_adapter *adapter = client->adapter; + + /* EDID EEPROMs are often 24C00 EEPROMs, which answer to all + addresses 0x50-0x57, but we only care about 0x51 and 0x55. So decline + attaching to addresses >= 0x56 on DDC buses */ + if (!(adapter->class & I2C_CLASS_SPD) && client->addr >= 0x56) { + return -ENODEV; + } + + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE) + && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) { + return -ENODEV; + } + + strlcpy(info->type, "eeprom", I2C_NAME_SIZE); + + return 0; +} + +static int mb_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &mb_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int mb_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &mb_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id mb_eeprom_id[] = { + { "mb_eeprom", 0 }, + { } +}; + +static struct i2c_driver mb_eeprom_driver = { + .driver = { + .name = "mb_eeprom", + }, + .probe = mb_eeprom_probe, + .remove = mb_eeprom_remove, + .id_table = mb_eeprom_id, + + .class = I2C_CLASS_DDC | I2C_CLASS_SPD, + .detect = mb_eeprom_detect, + .address_list = normal_i2c, +}; + +module_i2c_driver(mb_eeprom_driver); + +MODULE_AUTHOR("Wade "); +MODULE_DESCRIPTION("Ingrasys Mother Board EEPROM driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/ingrasys_s9200_64x_platform.h b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/ingrasys_s9200_64x_platform.h new file mode 100644 index 000000000000..8a38965e7932 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/ingrasys_s9200_64x_platform.h @@ -0,0 +1,148 @@ +#ifndef _S9200_64X_PLATFORM_H +#define _S9200_64X_PLATFORM_H + +#include + +// remove debug before release +#define DEBUG + +enum bus_order { + I2C_BUS_MAIN, + MUX_9548_0_CH0, + MUX_9548_0_CH1, + MUX_9548_0_CH2, + MUX_9548_0_CH3, + MUX_9548_0_CH4, + MUX_9548_0_CH5, + MUX_9548_0_CH6, + MUX_9548_0_CH7, + MUX_9548_1_CH0, + MUX_9548_1_CH1, + MUX_9548_1_CH2, + MUX_9548_1_CH3, + MUX_9548_1_CH4, + MUX_9548_1_CH5, + MUX_9548_1_CH6, + MUX_9548_1_CH7, + MUX_9546_0_CH0, + MUX_9546_0_CH1, + MUX_9546_0_CH2, + MUX_9546_0_CH3, + MUX_9546_1_CH0, + MUX_9546_1_CH1, + MUX_9546_1_CH2, + MUX_9546_1_CH3, + MUX_9548_2_CH0, + MUX_9548_2_CH1, + MUX_9548_2_CH2, + MUX_9548_2_CH3, + MUX_9548_2_CH4, + MUX_9548_2_CH5, + MUX_9548_2_CH6, + MUX_9548_2_CH7, + MUX_9548_3_CH0, + MUX_9548_3_CH1, + MUX_9548_3_CH2, + MUX_9548_3_CH3, + MUX_9548_3_CH4, + MUX_9548_3_CH5, + MUX_9548_3_CH6, + MUX_9548_3_CH7, + MUX_9548_4_CH0, + MUX_9548_4_CH1, + MUX_9548_4_CH2, + MUX_9548_4_CH3, + MUX_9548_4_CH4, + MUX_9548_4_CH5, + MUX_9548_4_CH6, + MUX_9548_4_CH7, + MUX_9548_5_CH0, + MUX_9548_5_CH1, + MUX_9548_5_CH2, + MUX_9548_5_CH3, + MUX_9548_5_CH4, + MUX_9548_5_CH5, + MUX_9548_5_CH6, + MUX_9548_5_CH7, + MUX_9548_6_CH0, + MUX_9548_6_CH1, + MUX_9548_6_CH2, + MUX_9548_6_CH3, + MUX_9548_6_CH4, + MUX_9548_6_CH5, + MUX_9548_6_CH6, + MUX_9548_6_CH7, + MUX_9548_7_CH0, + MUX_9548_7_CH1, + MUX_9548_7_CH2, + MUX_9548_7_CH3, + MUX_9548_7_CH4, + MUX_9548_7_CH5, + MUX_9548_7_CH6, + MUX_9548_7_CH7, + MUX_9548_8_CH0, + MUX_9548_8_CH1, + MUX_9548_8_CH2, + MUX_9548_8_CH3, + MUX_9548_8_CH4, + MUX_9548_8_CH5, + MUX_9548_8_CH6, + MUX_9548_8_CH7, + MUX_9548_9_CH0, + MUX_9548_9_CH1, + MUX_9548_9_CH2, + MUX_9548_9_CH3, + MUX_9548_9_CH4, + MUX_9548_9_CH5, + MUX_9548_9_CH6, + MUX_9548_9_CH7, + MUX_9548_10_CH0, + MUX_9548_10_CH1, + MUX_9548_10_CH2, + MUX_9548_10_CH3, + MUX_9548_10_CH4, + MUX_9548_10_CH5, + MUX_9548_10_CH6, + MUX_9548_10_CH7, +}; + +#define I2C_ADDR_MUX_9555_0 (0x20) +#define I2C_ADDR_MUX_9555_1 (0x24) +#define I2C_ADDR_MUX_9555_2 (0x25) +#define I2C_ADDR_MUX_9555_3 (0x26) +#define I2C_ADDR_MUX_9539_0 (0x76) +#define I2C_ADDR_MUX_9539_1 (0x76) +#define I2C_BUS_FAN_STATUS (I2C_BUS_MAIN) +#define I2C_BUS_SYS_LED (MUX_9548_1_CH1) + +#define NUM_OF_I2C_MUX (11) +#define NUM_OF_CPLD (5) +#define NUM_OF_QSFP_PORT (64) +#define NUM_OF_SFP_PORT (2) +#define QSFP_EEPROM_I2C_ADDR (0x50) + +enum gpio_reg { + REG_PORT0_IN, + REG_PORT1_IN, + REG_PORT0_OUT, + REG_PORT1_OUT, + REG_PORT0_POL, + REG_PORT1_POL, + REG_PORT0_DIR, + REG_PORT1_DIR, +}; + +struct ing_i2c_board_info { + int ch; + int size; + struct i2c_board_info *board_info; +}; + +struct i2c_init_data { + __u16 ch; + __u16 addr; + __u8 reg; + __u8 value; +}; + +#endif diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/ingrasys_s9200_64x_psu.c b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/ingrasys_s9200_64x_psu.c new file mode 100644 index 000000000000..46642f1271ca --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/modules/ingrasys_s9200_64x_psu.c @@ -0,0 +1,389 @@ +/* + * S9200-64X PSU driver + * + * Copyright (C) 2017 Ingrasys, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ingrasys_s9200_64x_platform.h" + +static ssize_t show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf); +static struct s9200_psu_data *s9200_psu_update_status(struct device *dev); +static struct s9200_psu_data *s9200_psu_update_eeprom(struct device *dev); +static int s9200_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len); + + +#define DRIVER_NAME "psu" + +// Addresses scanned +static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END }; + +/* PSU EEPROM SIZE */ +#define EEPROM_SZ 256 +#define READ_EEPROM 1 +#define NREAD_EEPROM 0 + +static struct i2c_client pca9555_client; + +/* pca9555 gpio pin mapping */ +#define PSU2_PWROK 0 +#define PSU2_PRSNT_L 1 +#define PSU2_PWRON_L 2 +#define PSU1_PWROK 3 +#define PSU1_PRSNT_L 4 +#define PSU1_PWRON_L 5 +#define TMP_75_INT_L 6 + +/* Driver Private Data */ +struct s9200_psu_data { + struct mutex lock; + char valid; /* !=0 if registers are valid */ + unsigned long last_updated; /* In jiffies */ + u8 index; /* PSU index */ + s32 status; /* IO expander value */ + char eeprom[EEPROM_SZ]; /* psu eeprom data */ + char psuABS; /* PSU absent */ + char psuPG; /* PSU power good */ +}; + +enum psu_index +{ + s9200_psu1, + s9200_psu2 +}; + +/* + * display power good attribute + */ +static ssize_t +show_psu_pg(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s9200_psu_data *data = s9200_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuPG; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + +/* + * display power absent attribute + */ +static ssize_t +show_psu_abs(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct s9200_psu_data *data = s9200_psu_update_status(dev); + unsigned int value; + + mutex_lock(&data->lock); + value = data->psuABS; + mutex_unlock(&data->lock); + + return sprintf(buf, "%d\n", value); +} + + +/* + * sysfs attributes for psu + */ +static DEVICE_ATTR(psu_pg, S_IRUGO, show_psu_pg, NULL); +static DEVICE_ATTR(psu_abs, S_IRUGO, show_psu_abs, NULL); +static DEVICE_ATTR(psu_eeprom, S_IRUGO, show_psu_eeprom, NULL); + +static struct attribute *s9200_psu_attributes[] = { + &dev_attr_psu_pg.attr, + &dev_attr_psu_abs.attr, + &dev_attr_psu_eeprom.attr, + NULL +}; + +/* + * display psu eeprom content + */ +static ssize_t +show_psu_eeprom(struct device *dev, + struct device_attribute *da, + char *buf) +{ + struct s9200_psu_data *data = s9200_psu_update_eeprom(dev); + + memcpy(buf, (char *)data->eeprom, EEPROM_SZ); + return EEPROM_SZ; +} + +static const struct attribute_group s9200_psu_group = { + .attrs = s9200_psu_attributes, +}; + +/* + * check gpio expander is accessible + */ +static int +pca9555_detect(struct i2c_client *client) +{ + if (i2c_smbus_read_byte_data(client, REG_PORT0_DIR) < 0) { + return -ENODEV; + } + + return 0; +} + +/* + * client address init + */ +static void +i2c_devices_client_address_init(struct i2c_client *client) +{ + pca9555_client = *client; + pca9555_client.addr = 0x25; +} + +static int +s9200_psu_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + struct s9200_psu_data *data; + int status, err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) { + status = -EIO; + goto exit; + } + + data = kzalloc(sizeof(struct s9200_psu_data), GFP_KERNEL); + if (!data) { + status = -ENOMEM; + goto exit; + } + memset(data, 0, sizeof(struct s9200_psu_data)); + i2c_set_clientdata(client, data); + data->valid = 0; + data->index = dev_id->driver_data; + mutex_init(&data->lock); + + i2c_devices_client_address_init(client); + + err = pca9555_detect(&pca9555_client); + if (err) { + dev_info(&client->dev, "pca9555_detect failed\n"); + return err; + } + + dev_info(&client->dev, "chip found\n"); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &s9200_psu_group); + if (status) { + goto exit_free; + } + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &s9200_psu_group); +exit_free: + kfree(data); +exit: + + return status; +} + +static int +s9200_psu_remove(struct i2c_client *client) +{ + struct s9200_psu_data *data = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &s9200_psu_group); + kfree(data); + + return 0; +} + + +/* + * psu eeprom read utility + */ +static int +s9200_psu_read_block(struct i2c_client *client, + u8 command, + u8 *data, + int data_len) +{ + int i=0, ret=0; + int blk_max = 32; //max block read size + + /* read eeprom, 32 * 8 = 256 bytes */ + for (i=0; i < EEPROM_SZ/blk_max; i++) { + ret = i2c_smbus_read_i2c_block_data(client, (i*blk_max), blk_max, + data + (i*blk_max)); + if (ret < 0) { + return ret; + } + } + return ret; +} + +/* + * update eeprom content + */ +static struct s9200_psu_data +*s9200_psu_update_eeprom(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s9200_psu_data *data = i2c_get_clientdata(client); + s32 status = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + if (time_after(jiffies, data->last_updated + 300 * HZ) + || !data->valid) { + + /* Read psu status */ + + status = i2c_smbus_read_word_data(&(pca9555_client), REG_PORT0_IN); + data->status = status; + + /*read psu status from io expander*/ + + if (data->index == s9200_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (status >> psu_pwrok) & 0x1; + data->psuABS = (status >> psu_prsnt_l) & 0x1; + + /* Read eeprom */ + if (!data->psuABS) { + //clear local eeprom data + memset(data->eeprom, 0, EEPROM_SZ); + + //read eeprom + status = s9200_psu_read_block(client, 0, data->eeprom, + ARRAY_SIZE(data->eeprom)); + + if (status < 0) { + memset(data->eeprom, 0, EEPROM_SZ); + dev_err(&client->dev, "Read eeprom failed, status=(%d)\n", status); + } else { + data->valid = 1; + } + } else { + memset(data->eeprom, 0, EEPROM_SZ); + } + data->last_updated = jiffies; + } + + mutex_unlock(&data->lock); + + return data; +} + +/* + * update psu status + */ +static struct s9200_psu_data +*s9200_psu_update_status(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct s9200_psu_data *data = i2c_get_clientdata(client); + s32 status = 0; + int psu_pwrok = 0; + int psu_prsnt_l = 0; + + mutex_lock(&data->lock); + + /* Read psu status */ + + status = i2c_smbus_read_word_data(&(pca9555_client), REG_PORT0_IN); + data->status = status; + + /*read psu status from io expander*/ + + if (data->index == s9200_psu1) { + psu_pwrok = PSU1_PWROK; + psu_prsnt_l = PSU1_PRSNT_L; + } else { + psu_pwrok = PSU2_PWROK; + psu_prsnt_l = PSU2_PRSNT_L; + } + data->psuPG = (status >> psu_pwrok) & 0x1; + data->psuABS = (status >> psu_prsnt_l) & 0x1; + + mutex_unlock(&data->lock); + + return data; +} + +static const struct i2c_device_id s9200_psu_id[] = { + { "psu1", s9200_psu1 }, + { "psu2", s9200_psu2 }, + {} +}; + +MODULE_DEVICE_TABLE(i2c, s9200_psu_id); + +static struct i2c_driver s9200_psu_driver = { + .driver = { + .name = DRIVER_NAME, + }, + .probe = s9200_psu_probe, + .remove = s9200_psu_remove, + .id_table = s9200_psu_id, + .address_list = normal_i2c, +}; + +static int __init s9200_psu_init(void) +{ + return i2c_add_driver(&s9200_psu_driver); +} + +static void __exit s9200_psu_exit(void) +{ + i2c_del_driver(&s9200_psu_driver); +} + +module_init(s9200_psu_init); +module_exit(s9200_psu_exit); + +MODULE_AUTHOR("Jason Tsai "); +MODULE_DESCRIPTION("S9200-64X psu driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/service/qsfp-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/service/qsfp-monitor.service new file mode 100644 index 000000000000..bcb9beb6a999 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/service/qsfp-monitor.service @@ -0,0 +1,15 @@ +[Unit] +Description= This QSFP Monitor service is to setup QSFP SI. +Requires=s9200-64x-monitor.service +After=s9200-64x-monitor.service + +[Service] +ExecStart=/usr/sbin/qsfp_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/service/s9200-64x-monitor.service b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/service/s9200-64x-monitor.service new file mode 100644 index 000000000000..bd92628a6c3f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/service/s9200-64x-monitor.service @@ -0,0 +1,19 @@ +[Unit] +Description= This Platform Monitor service is to initialize platform and monitor platform. +Before=platform-monitor.service +After=sysinit.target +Wants=fancontrol.service +Wants=qsfp-monitor.service +DefaultDependencies=no + +[Service] +ExecStartPre=/usr/sbin/i2c_utils.sh i2c_init +ExecStart=/usr/sbin/s9200_64x_monitor.sh +KillSignal=SIGKILL +SuccessExitStatus=SIGKILL + +# Resource Limitations +LimitCORE=infinity + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/i2c_utils.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/i2c_utils.sh new file mode 100644 index 000000000000..d0ca56f4d1b0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/i2c_utils.sh @@ -0,0 +1,1942 @@ +#!/bin/bash + +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +EXEC_FUNC=${1} +COLOR_LED=${2} +QSFP_PORT=${2} +QSFP_INIT_ACTION=${2} +MB_EEPROM_ACTION=${2} +TARGET_10G_MUX=${2} +QSFP_ACTION=${3} +QSFP_VALUE=${4} +ONOFF_LED=${3} +FAN_TRAY=${4} + +############################################################ +# Distributor ID: Debian +# Description: Debian GNU/Linux 8.6 (jessie) +# Release: 8.6 +# Codename: jessie +# Linux debian 3.16.0-4-amd64 #1 +# SMP Debian 3.16.36-1+deb8u1 (2016-09-03) x86_64 GNU/Linux +############################################################ + +# Color Definition +COLOR_TITLE="\e[1;32m" ### Green ### +COLOR_WARNING="\e[1;33m" ### Yellow ### +COLOR_ERROR="\e[1;31m" ### Red ### +COLOR_END="\e[0m" ### END ### + +I2C_NUM=0 +NUM_I801_DEVICE=$((I2C_NUM++)) #0 + +#MUX PCA9548#0 CPLD (I2C_NUM 1~8) +NUM_MUX_9548_CPLD_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_CPLD_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548#1 UCD (I2C_NUM 9~16) +NUM_MUX_9548_UCD_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_UCD_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9545 PSU (I2C_NUM 17~20) +NUM_MUX_9545_PSU_CHAN=() +for (( i=0; i<4; ++i )) +do + NUM_MUX_9545_PSU_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 QSFP ROOT (I2C_NUM 21~28) +NUM_MUX_9548_QSFP_ROOT_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_QSFP_ROOT_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 QSFP Port 0~7 (I2C_NUM 29~36) +NUM_MUX_9548_QSFP_0_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_QSFP_0_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 QSFP Port 8~15 (I2C_NUM 37~44) +NUM_MUX_9548_QSFP_1_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_QSFP_1_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 QSFP Port 16~23 (I2C_NUM 45~52) +NUM_MUX_9548_QSFP_2_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_QSFP_2_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 QSFP Port 24~31 (I2C_NUM 53~60) +NUM_MUX_9548_QSFP_3_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_QSFP_3_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 QSFP Port 32~39 (I2C_NUM 61~68) +NUM_MUX_9548_QSFP_4_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_QSFP_4_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 QSFP Port 40~47 (I2C_NUM 69~76) +NUM_MUX_9548_QSFP_5_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_QSFP_5_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 QSFP Port 48~55 (I2C_NUM 77~84) +NUM_MUX_9548_QSFP_6_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_QSFP_6_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 QSFP Port 56~63 (I2C_NUM 85~92) +NUM_MUX_9548_QSFP_7_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_QSFP_7_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9545 SFP (I2C_NUM 93~96) +NUM_MUX_9545_SFP_CHAN=() +for (( i=0; i<4; ++i )) +do + NUM_MUX_9545_SFP_CHAN[i]=$((I2C_NUM++)) +done + +#MUX PCA9548 CPLD SW Upgrade (I2C_NUM 97~104) +NUM_MUX_9548_CPLD_SW_CHAN=() +for (( i=0; i<8; ++i )) +do + NUM_MUX_9548_CPLD_SW_CHAN[i]=$((I2C_NUM++)) +done + +#MUX Alias +I2C_BUS_PSU1_EEPROM=${NUM_MUX_9545_PSU_CHAN[1]} +I2C_BUS_PSU2_EEPROM=${NUM_MUX_9545_PSU_CHAN[0]} +I2C_BUS_LED_BOARD=${NUM_MUX_9548_UCD_CHAN[1]} +I2C_BUS_ID_GPIO=${NUM_MUX_9548_UCD_CHAN[2]} +I2C_BUS_10GMUX=${NUM_MUX_9548_UCD_CHAN[4]} +I2C_BUS_HWM=${NUM_MUX_9548_UCD_CHAN[7]} +I2C_BUS_FAN_BOARD=${NUM_I801_DEVICE} +I2C_BUS_MB_EEPROM=${NUM_I801_DEVICE} +I2C_BUS_TH_RESET=${NUM_I801_DEVICE} +I2C_BUS_BOARD_TYPE=${NUM_I801_DEVICE} +I2C_BUS_BMC_BOARD_TYPE=${NUM_I801_DEVICE} +I2C_BUS_LM75_MAC=${NUM_MUX_9548_CPLD_CHAN[5]} +I2C_BUS_LM75_FRONT=${NUM_MUX_9548_CPLD_CHAN[6]} +I2C_BUS_LM75_REAR=${NUM_MUX_9548_CPLD_CHAN[5]} +I2C_BUS_PSU_INT=${NUM_I801_DEVICE} +I2C_BUS_PSU_STATUS=${NUM_I801_DEVICE} +I2C_BUS_MUX_RST=${NUM_I801_DEVICE} +#CPU Board +I2C_BUS_CPU_EEPROM=${NUM_I801_DEVICE} +I2C_BUS_CPU_TMP75=${NUM_I801_DEVICE} +I2C_BUS_MUX_CPU_CPLD=${NUM_I801_DEVICE} + +PATH_SYS_I2C_DEVICES="/sys/bus/i2c/devices" +PATH_SYS_CPLD="/sys/devices/platform/ingrasys-s9200-cpld.0" +PATH_HWMON_ROOT_DEVICES="/sys/class/hwmon" +PATH_HWMON_W83795_DEVICE="${PATH_HWMON_ROOT_DEVICES}/hwmon5" +PATH_I801_DEVICE="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_LM75_MAC="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_LM75_MAC}" +PATH_LM75_FRONT="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_LM75_FRONT}" +PATH_LM75_REAR="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_LM75_REAR}" +PATH_CPU_TMP75="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_I801_DEVICE}" +PATH_BMC_TMP75="${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_HWM}" +PATH_PSU1_EERPOM=${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU1_EEPROM} +PATH_PSU2_EEPROM=${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU2_EEPROM} +PATH_10GMUX=${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_10GMUX} +#PATH for MUX PCA9548_QSFP_ROOT +PATH_MUX_9548_QSFP_ROOT="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_PSU_CHAN[2]}" +PATH_MUX_9548_QSFP_ROOT_CHAN=() +for (( i=0; i<8; ++i )) +do + PATH_MUX_9548_QSFP_ROOT_CHAN[i]="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9548_QSFP_ROOT_CHAN[i]}" +done +PATH_MUX_9545_SFP="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_PSU_CHAN[3]}" +PATH_MUX_9545_SFP_CHAN=() +for (( i=0; i<4; ++i )) +do + PATH_MUX_9545_SFP_CHAN[i]="${PATH_SYS_I2C_DEVICES}/i2c-${NUM_MUX_9545_SFP_CHAN[i]}" +done + +#i2cmap and gpiomap path +PATH_I2CMAP=/tmp/i2cmap + +#Mother Board +I2C_ADDR_MUX_9539_TH_RST=0x74 +I2C_ADDR_LED_BOARD=0x75 +I2C_ADDR_FAN_BOARD=0x20 +I2C_ADDR_ID_GPIO=0x27 +I2C_ADDR_MUX_9548_CPLD=0x70 +I2C_ADDR_MUX_9548_UCD=0x76 +I2C_ADDR_MUX_9545_PSU=0x72 +I2C_ADDR_MUX_9548_QSFP_ROOT=0x71 +I2C_ADDR_MUX_9548_QSFP=0x73 +I2C_ADDR_MUX_9545_SFP=0x73 +I2C_ADDR_CPLD=0x33 +I2C_ADDR_MB_EEPROM=0x55 +I2C_ADDR_QSFP_EEPROM=0x50 +I2C_ADDR_PSU_EEPROM=0x50 +I2C_ADDR_LM75_MAC=0x4E +I2C_ADDR_LM75_FRONT=0x4D +I2C_ADDR_LM75_REAR=0x4D +I2C_ADDR_10GMUX=0x67 +#Dummy BMC Board +I2C_ADDR_HWM=0x2F +I2C_ADDR_PSU_INT=0x24 #PSU Interrup on Dummy BMC Board +I2C_ADDR_BMC_BOARD_TYPE=0x24 #PSU Status on Dummy BMC Board +I2C_ADDR_PSU_STATUS=0x25 #PSU Status on Dummy BMC Board +I2C_ADDR_MUX_RST=0x26 #MUX RST on Dummy BMC Board +I2C_ADDR_TMP75_BB=0x4A +#CPU Board +I2C_ADDR_CPU_EEPROM=0x51 +I2C_ADDR_CPU_TMP75=0x4F +I2C_ADDR_MUX_CPU_CPLD=0x77 + +#sysfs +PATH_SYSFS_PSU1="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU1_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU_EEPROM)" +PATH_SYSFS_PSU2="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_PSU2_EEPROM}-$(printf "%04x" $I2C_ADDR_PSU_EEPROM)" + +#Active High/Low +ACTIVE_LOW=1 +ACTIVE_HIGH=0 +#GPIO Direction In/Out +DIR_IN=in +DIR_OUT=out + +#Power Supply Status +PSU_DC_ON=1 +PSU_DC_OFF=0 +PSU_EXIST=1 +PSU_NOT_EXIST=0 + +#W83795 Registers +REG_BANK_SEL=0x00 +REG_VOLT_CTRL1=0x02 +REG_VOLT_CTRL2=0x03 +REG_TEMP_CTRL1=0x04 +REG_TEMP_CTRL2=0x05 + +#PCA9535 Registers +REG_IN_0=0 +REG_IN_1=1 +REG_OUT_0=2 +REG_OUT_1=3 +REG_POLARITY_0=4 +REG_POLARITY_1=5 +REG_CFG_0=6 +REG_CFG_1=7 + +#LM75 Registers +LM75_REG_TEMP=0x00 +LM75_REG_CONF=0x01 +LM75_REG_HYST=0x02 +LM75_REG_TOS=0x03 + +#Bit Mask +BIT_MASK=(1 2 4 8 16 32 64 128) + +#MUX Type +PCA9545="pca9545" +PCA9548="pca9548" + +#PLATFORM Variables +PORT_NUM=64 + +#CPLD Variables +CPLD_QSFP_GROUP=(12 25 38 51 64) +CPLD_QSFP_STATUS_REG_BASE=0x20 +CPLD_QSFP_MODE_SELECT_REG_BASE=0x30 +CPLD_QSFP_ABS="abs" +CPLD_QSFP_INT="int" +CPLD_QSFP_RST="rst" +CPLD_QSFP_LP="lp" + + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} i2c_init" + echo " : ${0} i2c_deinit" + echo " : ${0} i2c_temp_init" + echo " : ${0} i2c_fan_init" + echo " : ${0} i2c_volmon_init" + echo " : ${0} i2c_io_exp_init" + echo " : ${0} i2c_psu_eeprom_get" + echo " : ${0} i2c_mb_eeprom_get" + echo " : ${0} i2c_cpu_eeprom_get" + echo " : ${0} i2c_qsfp_eeprom_get [1-${PORT_NUM}]" + echo " : ${0} i2c_qsfp_eeprom_init new|delete" + echo " : ${0} i2c_mb_eeprom_init new|delete" + echo " : ${0} i2c_cpu_eeprom_init new|delete" + echo " : ${0} i2c_qsfp_status_get [1-${PORT_NUM}]" + echo " : ${0} i2c_qsfp_type_get [1-${PORT_NUM}]" + echo " : ${0} i2c_qsfp_signal_get [1-${PORT_NUM}] [abs|int|rst|lp]" + echo " : ${0} i2c_qsfp_signal_set [1-${PORT_NUM}] [rst|lp] [0|1] (low_active)" + echo " : ${0} i2c_board_type_get" + echo " : ${0} i2c_bmc_board_type_get" + echo " : ${0} i2c_psu_status" + echo " : ${0} i2c_led_psu_status_set" + echo " : ${0} i2c_led_fan_status_set" + echo " : ${0} i2c_led_fan_tray_status_set" + echo " : ${0} i2c_led_fan_tray_test" + echo " : ${0} i2c_cpld_version" + echo " : ${0} i2c_test_all" + echo " : ${0} i2c_led_test" + echo " : ${0} i2c_sys_led green|amber" + echo " : ${0} i2c_fan_led green|amber" + echo " : ${0} i2c_psu1_led green|amber" + echo " : ${0} i2c_psu2_led green|amber" + echo " : ${0} i2c_fan_tray_led green|amber on|off [1-4]" + echo " : ${0} i2c_10g_mux cpu|fp" + echo "----------------------------------------------------" +} + +#Pause function +function _pause { + read -p "$*" +} + +#Retry command function +function _retry { + local i + for i in {1..5}; + do + eval "${*}" && break || echo "retry"; sleep 1; + done +} + +#logical(front panel) to physical (falcon core) port mapping +function _port_logic2phy { + + local logic_port=$1 + local phy_port=0 + + if (( $logic_port >=1 && $logic_port <= 32 )) ; then + phy_port=$(( (logic_port-1)/2*4 + (logic_port-1)%2 + 1)) + elif (( $logic_port >=33 && $logic_port <= 64 )) ; then + phy_port=$(( (((logic_port-1)%32))/2*4 + (logic_port-1)%2 + 3)) + fi + + echo $phy_port +} + +#set i2cmap +function _set_i2cmap { + local i2c_n=$1 + local alias=$2 + + #create i2cmap dir if not exist + mkdir -p $PATH_I2CMAP + + #check i2c_n exists in sysfs + if [ ! -L ${PATH_SYS_I2C_DEVICES}/i2c-${i2c_n} ]; then + echo "${PATH_SYS_I2C_DEVICES}/i2c-${i2c_n} does not exist." + return + fi + + #create or update link + ln -sf ${PATH_SYS_I2C_DEVICES}/i2c-${i2c_n} ${PATH_I2CMAP}/${alias} +} + +#clear i2cmap +function _clear_i2cmap { + #delete i2cmap dir + rm -rf ${PATH_I2CMAP}/ +} + +#remove kernel module if exists +function _util_rmmod { + local mod=$1 + [ "$(lsmod | grep "^$mod ")" != "" ] && rmmod $mod +} + +function _create_i2c_mux_device { + local mux_type=$1 + local mux_addr=$2 + local mux_parent_chan=$3 + local mux_chan0=$4 + local mux_desc=$5 + + if [ ! -e "${PATH_SYS_I2C_DEVICES}/i2c-${mux_chan0}" ]; then + _retry "echo '$mux_type ${mux_addr}' > ${mux_parent_chan}/new_device" + _set_i2cmap ${mux_chan0} "${mux_desc}" + else + echo "${mux_desc} ${mux_addr} already init." + fi +} + +#I2C Init +function _i2c_init { + echo "=========================================================" + echo "# Description: I2C Init" + echo "=========================================================" + + _util_rmmod i2c_i801 + modprobe i2c_i801 #disable_features=0x10 + modprobe i2c_dev + modprobe i2c_mux_pca954x force_deselect_on_exit=1 + + #add MUX_9548_CPLD on I801 + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_CPLD ${PATH_I801_DEVICE} ${NUM_MUX_9548_CPLD_CHAN[0]} "PCA9548_CPLD" + + #add MUX_9548_UCD on I801 + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_UCD ${PATH_I801_DEVICE} ${NUM_MUX_9548_UCD_CHAN[0]} "PCA9548_UCD" + + #add MUX_9545_PSU on I801 + _create_i2c_mux_device $PCA9545 $I2C_ADDR_MUX_9545_PSU ${PATH_I801_DEVICE} ${NUM_MUX_9545_PSU_CHAN[0]} "PCA9545_PSU" + + #add MUX_9548_QSFP_ROOT on MUX_9545_PSU_CHAN[2] + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_QSFP_ROOT ${PATH_MUX_9548_QSFP_ROOT} ${NUM_MUX_9548_QSFP_ROOT_CHAN[0]} "PCA9548_QSPF_ROOT" + + #add MUX_9548_QSFP_0 on MUX_9548_QSFP_ROOT_CHAN[0] + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_QSFP ${PATH_MUX_9548_QSFP_ROOT_CHAN[0]} ${NUM_MUX_9548_QSFP_0_CHAN[0]} "PCA9548_QSPF_0" + + #add MUX_9548_QSFP_1 on MUX_9548_QSFP_ROOT_CHAN[1] + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_QSFP ${PATH_MUX_9548_QSFP_ROOT_CHAN[1]} ${NUM_MUX_9548_QSFP_1_CHAN[0]} "PCA9548_QSPF_1" + + #add MUX_9548_QSFP_2 on MUX_9548_QSFP_ROOT_CHAN[2] + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_QSFP ${PATH_MUX_9548_QSFP_ROOT_CHAN[2]} ${NUM_MUX_9548_QSFP_2_CHAN[0]} "PCA9548_QSPF_2" + + #add MUX_9548_QSFP_3 on MUX_9548_QSFP_ROOT_CHAN[3] + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_QSFP ${PATH_MUX_9548_QSFP_ROOT_CHAN[3]} ${NUM_MUX_9548_QSFP_3_CHAN[0]} "PCA9548_QSPF_3" + + #add MUX_9548_QSFP_4 on MUX_9548_QSFP_ROOT_CHAN[4] + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_QSFP ${PATH_MUX_9548_QSFP_ROOT_CHAN[4]} ${NUM_MUX_9548_QSFP_4_CHAN[0]} "PCA9548_QSPF_4" + + #add MUX_9548_QSFP_5 on MUX_9548_QSFP_ROOT_CHAN[5] + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_QSFP ${PATH_MUX_9548_QSFP_ROOT_CHAN[5]} ${NUM_MUX_9548_QSFP_5_CHAN[0]} "PCA9548_QSPF_5" + + #add MUX_9548_QSFP_6 on MUX_9548_QSFP_ROOT_CHAN[6] + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_QSFP ${PATH_MUX_9548_QSFP_ROOT_CHAN[6]} ${NUM_MUX_9548_QSFP_6_CHAN[0]} "PCA9548_QSPF_6" + + #add MUX_9548_QSFP_7 on MUX_9548_QSFP_ROOT_CHAN[7] + _create_i2c_mux_device $PCA9548 $I2C_ADDR_MUX_9548_QSFP ${PATH_MUX_9548_QSFP_ROOT_CHAN[7]} ${NUM_MUX_9548_QSFP_7_CHAN[0]} "PCA9548_QSPF_7" + + #add MUX_9545_SFP on QSFP_ROOT + _create_i2c_mux_device $PCA9545 $I2C_ADDR_MUX_9545_SFP ${PATH_MUX_9545_SFP} ${NUM_MUX_9545_SFP_CHAN[0]} "PCA9545_SPF" + + #Init CPLD LED_CLR Register (QSFP LED) + i2cset -y -m ${BIT_MASK[2]} ${NUM_I801_DEVICE} ${I2C_ADDR_MUX_9539_TH_RST} ${REG_OUT_0} 0xFF + + _util_rmmod coretemp + _util_rmmod jc42 + _util_rmmod w83795 + _util_rmmod lm75 + + _i2c_temp_init + _i2c_volmon_init + modprobe coretemp + modprobe lm75 + modprobe jc42 + modprobe eeprom_mb + _i2c_mb_eeprom_init "new" + _i2c_cpu_eeprom_init "new" + modprobe eeprom + modprobe gpio-pca953x + _i2c_sensors_init + _i2c_fan_init + _i2c_io_exp_init + _i2c_psu_init + _i2c_qsfp_eeprom_init "new" + _i2c_led_psu_status_set + _i2c_led_fan_status_set + COLOR_LED="green" + echo "${COLOR_LED}" + _i2c_sys_led + modprobe cpld + _config_rmem +} + +#I2C Deinit +function _i2c_deinit { + for mod in cpld coretemp jc42 w83795 lm75 eeprom eeprom_mb gpio-pca953x i2c_mux_pca954x i2c_i801 ingrasys_s9200_64x_psu; + do + _util_rmmod $mod + done + _clear_i2cmap +} + +#Temperature sensor Init +function _i2c_temp_init { + local lm="lm75" + local tmp="tmp75" + local i2c_bus=${I2C_BUS_HWM} + local i2c_addr=${I2C_ADDR_HWM} + + echo "=========================================================" + echo "# Description: TEMP INIT" + echo "=========================================================" + + # select bank0 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_BANK_SEL} 0x80 + echo "enable VDSEN14, VDSEN15, VDSEN16, and TR4 temperature monitoring" + i2cset -y -r ${i2c_bus=} ${i2c_addr} ${REG_TEMP_CTRL2} 0x6A + + echo "export CPU sensor TMP75 to sysfs" + echo "${tmp} ${I2C_ADDR_CPU_TMP75}" > ${PATH_CPU_TMP75}/new_device + + echo "Add Dummy Board LM75 to sysfs" + echo "${lm} ${I2C_ADDR_LM75_MAC}" > ${PATH_LM75_MAC}/new_device + echo "${lm} ${I2C_ADDR_LM75_FRONT}" > ${PATH_LM75_FRONT}/new_device + echo "${lm} ${I2C_ADDR_LM75_REAR}" > ${PATH_LM75_REAR}/new_device + + echo "CLKIN clock frequency set as 48Mhz" + i2cset -y -r ${i2c_bus} ${i2c_addr} 0x01 0x1C + + # select bank 2 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_BANK_SEL} 0x82 + echo "set PWM mode in FOMC" + i2cset -y -r ${i2c_bus} ${i2c_addr} 0x0F 0x00 +} + +#FAN Init +function _i2c_fan_init { + local init_fan_speed=120 + + echo "=========================================================" + echo "# Description: FAN INIT" + echo "=========================================================" + + if [ -e "${PATH_HWMON_W83795_DEVICE}" ]; then + echo "Init Fan Speed to ${init_fan_speed} (MAX is 255)" + echo $init_fan_speed > ${PATH_HWMON_W83795_DEVICE}/device/pwm1 + echo $init_fan_speed > ${PATH_HWMON_W83795_DEVICE}/device/pwm2 + else + echo "FAIL, W83795 not found in path ${PATH_HWMON_W83795_DEVICE}" + fi +} + +#VOLMON Init +function _i2c_volmon_init { + echo -n "VOLMON INIT" + local i2c_bus=${I2C_BUS_HWM} + local i2c_addr=${I2C_ADDR_HWM} + + #select bank0 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_BANK_SEL} 0x80 + #enable voltage monitoring VSEN 1~8 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_VOLT_CTRL1} 0xFF + #enable voltage monitoring 3VDD and 3VBAT + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_VOLT_CTRL2} 0x50 + #eable voltage monitoring VSEN12 and VSEN13 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_TEMP_CTRL1} 0x0A + + echo "Done" +} + +#IO Expander Init +function _i2c_io_exp_init { + local i2c_bus=0 + local i2c_addr=0 + + echo "=========================================================" + echo "# Description: I2C IO Expander Init" + echo "=========================================================" + + echo "Init PCA9539 TH RESET IO Expander" + #PCA9539 TH RESET + #0.0 TH_RST_L OUT 1 + #0.1 TH_PCIE_RST_L OUT 1 + #0.2 LED_CLR OUT 1 + #0.3 HOST_TO_BMC_I2C_GPIO OUT 0 + #0.4 USB_MUX_SEL OUT 0 + #0.5 UART_MUX_SEL OUT 0 + #0.6 FIN0 OUT 0 + #0.7 FIN7 OUT 0 + #1.0 TH_INT_L IN + #1.1 CPLD4_TO_CPU_INT_L IN + #1.2 CPLD3_TO_CPU_INT_L IN + #1.3 CPLD2_TO_CPU_INT_L IN + #1.4 CPLD1_TO_CPU_INT_L IN + #1.5 REF_SEL OUT 0 + #1.6 I210_PE_RST_L OUT 1 + #1.7 I210_RST_L OUT 1 + i2c_bus=${I2C_BUS_TH_RESET} + i2c_addr=${I2C_ADDR_MUX_9539_TH_RST} + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_0} $((2#00000111)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_1} $((2#11000000)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} $((2#00011111)) + + echo "Init PCA9539 LED BOARD IO Expander" + #PCA9539 LED BOARD + #0.0 SYS_LED_G OUT 1 + #0.1 FAN_LED_EN OUT 1 + #0.2 FAN_LED_Y OUT 0 + #0.3 PSU1_LED_Y OUT 0 + #0.4 PSU0_LED_Y OUT 0 + #0.5~0.7 X + #1.0 PSU1_PWROK OUT 1 + #1.1 PSU0_PWROK OUT 1 + i2c_bus=${I2C_BUS_LED_BOARD} + i2c_addr=${I2C_ADDR_LED_BOARD} + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_0} $((2#00000011)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_1} $((2#00000011)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} 0x00 + + echo "Init PCA9535 ID_GPIO IO Expander" + #PCA9535 ID_GPIO + #0.0 ~ 0.7 X + #1.0 Build_REV_0 IN + #1.1 Build_REV_1 IN + #1.2 HW_REV_0 IN + #1.3 HW_REV_1 IN + #1.4 Board_ID_0 IN + #1.5 Board_ID_1 IN + #1.6 Board_ID_2 IN + #1.7 Board_ID_3 IN + i2c_bus=${I2C_BUS_ID_GPIO} + i2c_addr=${I2C_ADDR_ID_GPIO} + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} 0xFF + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} 0xFF + + #I2C_ADDR_FAN_BOARD + echo "Init PCA9535 FAN_BOARD IO Expander" + #PCA9535 FAN_BOARD + #0.0 EN_FAN1_LED_G_H OUT 1 + #0.1 EN_FAN1_LED_Y_H OUT 0 + #0.2 FAN1_ABS# IN 0 + #0.3 FAN1_DIR# IN 0 + #0.4 EN_FAN2_LED_G_H OUT 1 + #0.5 EN_FAN2_LED_Y_H OUT 0 + #0.6 FAN2_ABS# IN 0 + #0.7 FAN2_DIR# IN 0 + #1.0 EN_FAN3_LED_G_H OUT 1 + #1.1 EN_FAN3_LED_Y_H OUT 0 + #1.2 FAN3_ABS# IN 0 + #1.3 FAN3_DIR# IN 0 + #1.4 EN_FAN4_LED_G_H OUT 1 + #1.5 EN_FAN4_LED_Y_H OUT 0 + #1.6 FAN4_ABS# IN 0 + #1.7 FAN4_DIR# IN 0 + i2c_bus=${I2C_BUS_FAN_BOARD} + i2c_addr=${I2C_ADDR_FAN_BOARD} + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_0} $((2#00010001)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_1} $((2#00010001)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} $((2#11001100)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} $((2#11001100)) + + #PCA9555 on BMC Dummy Board + echo "Init PCA9555 Interrupt IO Expander" + #PCA9555 Interrupt Expander + #0.0 HWM_INT_L IN + #0.1 UCD9090_INT_L IN + #0.2 ETHX_INT_L IN + #0.3 HOST_TO_BMC_INT_L IN + #0.4 THERMAL_ALT1# IN + #0.5 FAN_STATUS_INT_L IN + #0.6 PSU0_INT_L IN + #0.7 PSU1_INT_L IN + #1.0 Build_REV_0 IN + #1.1 Build_REV_1 IN + #1.2 HW_REV_0 IN + #1.3 HW_REV_1 IN + #1.4 Board_ID_0 IN + #1.5 Board_ID_1 IN + #1.6 Board_ID_2 IN + #1.7 Board_ID_3 IN + i2c_bus=${I2C_BUS_PSU_INT} + i2c_addr=${I2C_ADDR_PSU_INT} + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} 0xFF + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} 0xFF + + #PCA9555 on BMC Dummy Board + echo "Init PCA9555 PSU0_PWROK IO Expander" + #PCA9555 PSU0_PWROK Expander + #0.0 PSU0_PWROK IN + #0.1 PSU0_PRSNT_L IN + #0.2 PSU0_PWRON_L OUT 0 + #0.3 PSU1_PWROK IN + #0.4 PSU1_PRSNT_L IN + #0.5 PSU1_PWRON_L OUT 0 + #0.6 TMP75_INT_L IN + #0.7 GPIOF7 IN + #1.0 ALL_PWR_GOOD IN + #1.1 CPU_PRSNT_L IN + #1.2 FP_BTN_UARTSEL_EN_L OUT 0 + #1.3 HOST_TO_BMC_I2C_GPIO OUT 0 + #1.4 HOST_CPU_PWRBTN_L OUT 1 + #1.5 N/A + #1.6 N/A + #1.7 N/A + i2c_bus=${I2C_BUS_PSU_STATUS} + i2c_addr=${I2C_ADDR_PSU_STATUS} + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_1} $((2#00010000)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} $((2#11011011)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} $((2#11100011)) + + #PCA9555 on BMC Dummy Board + echo "Init PCA9555 MUX RST IO Expander" + #PCA9555 MUX RST Expander + #0.0 FRU_I2C_MUX_RST_L OUT 1 + #0.1 MAIN_I2C_MUX_RST_L OUT 1 + #0.2 SYSTEM_LED_RST_L OUT 1 + #0.3 BMC_TO_UCD_RST_L OUT 1 + #0.4 BMC_TO_HOST_RST_L OUT 1 + #0.5 ETHX_RST_L OUT 1 + #0.6 GPIOF4 IN + #0.7 N/A + #1.0 CPU_to_FRU_I2C_EN OUT 1 + #1.1 CPU_to_MAIN_I2C_EN OUT 1 + #1.2 P3V3_FAN_EN OUT 1 + #1.3 P3V3_I2C_EN OUT 1 + #1.4 UCD9090_CNTRL OUT 1 + #1.5 UART_MUX_SEL OUT 0 + #1.6 USB_MUX_SEL OUT 0 + #1.7 ETHX_CPU_EEPROM_SEL OUT 0 + i2c_bus=${I2C_BUS_MUX_RST} + i2c_addr=${I2C_ADDR_MUX_RST} + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_0} $((2#00111111)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_OUT_1} $((2#00011111)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_0} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_POLARITY_1} 0x00 + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} $((2#01000000)) + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} 0x00 + + #PCA9539 on CPU Board + echo "Init PCA9539 CPLD IO Expander on CPU" + i2c_bus=${I2C_BUS_MUX_CPU_CPLD} + i2c_addr=${I2C_ADDR_MUX_CPU_CPLD} + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_0} 0xFF + i2cset -y -r ${i2c_bus} ${i2c_addr} ${REG_CFG_1} 0xFF +} + +function _i2c_sensors_init { + echo "SENSORS init" + local dev_path + + # add w83795 to sysfs + dev_path="${PATH_SYS_I2C_DEVICES}/${I2C_BUS_HWM}-$(printf "%04x" ${I2C_ADDR_HWM})" + if ! [ -L ${dev_path} ]; then + echo "w83795adg ${I2C_ADDR_HWM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_HWM}/new_device + while [ ! -e "${PATH_HWMON_W83795_DEVICE}" ]; do + sleep 1 + done + else + echo "${dev_path} already exist (w83795)" + fi + + # BMC board thermal + dev_path="${PATH_SYS_I2C_DEVICES}/${NUM_I801_DEVICE}-$(printf "%04x" ${I2C_ADDR_TMP75_BB})" + if ! [ -L ${dev_path} ]; then + echo "tmp75 ${I2C_ADDR_TMP75_BB}" > ${PATH_BMC_TMP75}/new_device + else + echo "${dev_path} already exist" + fi + + echo "Done" +} + +#Set FAN Tray LED +function _i2c_led_fan_tray_status_set { + echo "=========================================================" + echo "# Description: FAN Tray Status Setup" + echo "=========================================================" + + #check W83795 exists + if [ ! -e "${PATH_HWMON_W83795_DEVICE}" ]; then + echo "FAIL, W83795 not found in path ${PATH_HWMON_W83795_DEVICE}" + return + fi + #FAN Status get + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + + FAN_TRAY=1 + if [ "${FAN1_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="off" + _i2c_fan_tray_led + + echo "set [FAN TRAY 1] [Green]=on [Amber]=off" + else + COLOR_LED="green" + ONOFF_LED="off" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_fan_tray_led + + echo "set [FAN TRAY 1] [Green]=off [Amber]=on" + fi + + FAN_TRAY=2 + if [ "${FAN3_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="off" + _i2c_fan_tray_led + + echo "set [FAN TRAY 2] [Green]=on [Amber]=off" + else + COLOR_LED="green" + ONOFF_LED="off" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_fan_tray_led + + echo "set [FAN TRAY 2] [Green]=off [Amber]=on" + fi + + FAN_TRAY=3 + if [ "${FAN5_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="off" + _i2c_fan_tray_led + + echo "set [FAN TRAY 3] [Green]=on [Amber]=off" + else + COLOR_LED="green" + ONOFF_LED="off" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_fan_tray_led + + echo "set [FAN TRAY 3] [Green]=off [Amber]=on" + fi + + FAN_TRAY=4 + if [ "${FAN7_ALARM}" == "0" ]; then + COLOR_LED="green" + ONOFF_LED="on" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="off" + _i2c_fan_tray_led + + echo "set [FAN TRAY 4] [Green]=on [Amber]=off" + else + COLOR_LED="green" + ONOFF_LED="off" + _i2c_fan_tray_led + + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_fan_tray_led + + echo "set [FAN TRAY 4] [Green]=off [Amber]=on" + fi +} + +#Test FAN Tray LED +function _i2c_led_fan_tray_test { + echo "=========================================================" + echo "# Description: FAN Tray LED Test" + echo "=========================================================" + + for i in {1..4} + do + FAN_TRAY=$i + COLOR_LED="green" + ONOFF_LED="on" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="off" + _i2c_fan_tray_led + _pause "Check [Fan Tray ${i} LED] = Green and Press [Enter] key to continue..." + + COLOR_LED="green" + ONOFF_LED="off" + _i2c_fan_tray_led + COLOR_LED="amber" + ONOFF_LED="on" + _i2c_fan_tray_led + _pause "Check [Fan Tray ${i} LED] = Amber and Press [Enter] key to continue..." + done +} +#Set FAN LED +function _i2c_led_fan_status_set { + echo "=========================================================" + echo "# Description: FAN Status Setup" + echo "=========================================================" + + #check W83795 exists in hwmon2 + if [ ! -e "${PATH_HWMON_W83795_DEVICE}" ]; then + echo "FAIL, W83795 not found in path ${PATH_HWMON_W83795_DEVICE}" + return + fi + + #PSU Status set + FAN1_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan1_alarm` + FAN3_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan3_alarm` + FAN5_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan5_alarm` + FAN7_ALARM=`cat ${PATH_HWMON_W83795_DEVICE}/device/fan7_alarm` + + if [ "${FAN1_ALARM}" == "0" ] \ + && [ "${FAN3_ALARM}" == "0" ] \ + && [ "${FAN5_ALARM}" == "0" ] \ + && [ "${FAN7_ALARM}" == "0" ] ; then + COLOR_LED="green" + _i2c_fan_led + else + COLOR_LED="amber" + _i2c_fan_led + fi + echo "set [FAN LED] = ${COLOR_LED}" +} + +#Set PSU LED on LED Board +function _i2c_led_psu_status_set { + + echo "=========================================================" + echo "# Description: PSU LED Status Setup" + echo "=========================================================" + + #Get PSU Status + _i2c_psu_status + + #PSU1 Status + echo "------------------------------" + if [ "${psu1Exist}" == ${PSU_EXIST} ]; then + if [ "${psu1PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + _i2c_psu1_led + else + COLOR_LED="amber" + _i2c_psu1_led + fi + else + COLOR_LED="amber" + _i2c_psu1_led + fi + echo "set [PSU1 LED] = ${COLOR_LED}" + + #PSU2 Status + echo "------------------------------" + if [ "${psu2Exist}" == ${PSU_EXIST} ]; then + if [ "${psu2PwGood}" == ${PSU_DC_ON} ]; then + COLOR_LED="green" + _i2c_psu2_led + else + COLOR_LED="amber" + #ONOFF_LED="on" + _i2c_psu2_led + fi + else + COLOR_LED="amber" + _i2c_psu2_led + fi + echo "set [PSU2 LED] = ${COLOR_LED}" +} + +#LED Test +function _i2c_led_test { + echo "=========================================================" + echo "# Description: I2C LED TEST" + echo "=========================================================" + #sys led (green) + _i2c_reset_led + COLOR_LED="green" + _i2c_sys_led + _pause 'Check [SYS LED] = Green and Press [Enter] key to continue...' + #sys led (amber) + _i2c_reset_led + COLOR_LED="amber" + _i2c_sys_led + _pause 'Check [SYS LED] = Amber and Press [Enter] key to continue...' + + #FAN led (green) + _i2c_reset_led + COLOR_LED="green" + _i2c_fan_led + _pause 'Check [FAN LED] Green and Press [Enter] key to continue...' + #FAN led (amber) + _i2c_reset_led + COLOR_LED="amber" + _i2c_fan_led + _pause 'Check [FAN LED] = Amber and Press [Enter] key to continue...' + + #PSU2 led (green) + _i2c_reset_led + COLOR_LED="green" + _i2c_psu2_led + _pause 'Check [PSU2 LED] = Green and Press [Enter] key to continue...' + #PSU2 led (amber) + _i2c_reset_led + COLOR_LED="amber" + _i2c_psu2_led + _pause 'Check [PSU2 LED] = Amber and Press [Enter] key to continue...' + + #PSU1 led (green) + _i2c_reset_led + COLOR_LED="green" + _i2c_psu1_led + _pause 'Check [PSU1 LED] = Green and Press [Enter] key to continue...' + #PSU2 led (amber) + _i2c_reset_led + COLOR_LED="amber" + _i2c_psu1_led + _pause 'Check [PSU1 LED] = Amber and Press [Enter] key to continue...' + + #Turn OFF All LED + _i2c_reset_led + _pause 'Check turn off all LEDs and Press [Enter] key to continue...' +} + +#Set QSFP Port variable +function _qsfp_port_i2c_var_set { + #global variables + cpld_group=0 + cpld_i2c_bus=0 + cpld_i2c_addr=$I2C_ADDR_CPLD + cpld_qsfp_status_reg_offset=0 + cpld_qsfp_mode_reg_offset=0 + + #local variables + local i=0 + local port=$1 + local port_group=$(( (port - 1)/8 )) + + case ${port_group} in + 0) + #the i2c expander base bus num to read qsfp eeprom + eeprombusbase=${NUM_MUX_9548_QSFP_0_CHAN[0]} + ;; + 1) + eeprombusbase=${NUM_MUX_9548_QSFP_1_CHAN[0]} + ;; + 2) + eeprombusbase=${NUM_MUX_9548_QSFP_2_CHAN[0]} + ;; + 3) + eeprombusbase=${NUM_MUX_9548_QSFP_3_CHAN[0]} + ;; + 4) + eeprombusbase=${NUM_MUX_9548_QSFP_4_CHAN[0]} + ;; + 5) + eeprombusbase=${NUM_MUX_9548_QSFP_5_CHAN[0]} + ;; + 6) + eeprombusbase=${NUM_MUX_9548_QSFP_6_CHAN[0]} + ;; + 7) + eeprombusbase=${NUM_MUX_9548_QSFP_7_CHAN[0]} + ;; + *) + echo "Please input 1~${PORT_NUM}" + ;; + esac + + #set cpld_group and cpld_i2c_bus according to port + for ((i=0; i<5; ++i)) + do + if (("${port}" <= "${CPLD_QSFP_GROUP[i]}")); + then + local port_offset=0 + cpld_group=$i + cpld_i2c_bus=${NUM_MUX_9548_CPLD_CHAN[i]} + + if ((i>0)) + then + port_offset=$(( port - CPLD_QSFP_GROUP[i-1] )) + else + port_offset=$port + fi + cpld_qsfp_status_reg_offset=$((CPLD_QSFP_STATUS_REG_BASE + port_offset)) + cpld_qsfp_mode_reg_offset=$((CPLD_QSFP_MODE_SELECT_REG_BASE + port_offset)) + + break + fi + done +} + +function _i2c_get { + local i2c_bus=$1 + local i2c_addr=$2 + local reg=$3 + echo `i2cget -y ${i2c_bus} ${i2c_addr} ${reg}` +} + +function _i2c_set { + local i2c_bus=$1 + local i2c_addr=$2 + local reg=$3 + local mask=$4 + local value=$5 + + echo `i2cset -m $mask -y -r ${i2c_bus} ${i2c_addr} ${reg} ${value}` +} + +#Set QSFP Port variable +function _qsfp_eeprom_var_set { + #local variables + local port=$1 + + #global variables + eeprombusidx=$(( (port - 1)%8 )) + + case $eeprombusidx in + 0) + eeprombus=$(( $eeprombusbase + 0 )) + ;; + 1) + eeprombus=$(( $eeprombusbase + 1 )) + ;; + 2) + eeprombus=$(( $eeprombusbase + 2 )) + ;; + 3) + eeprombus=$(( $eeprombusbase + 3 )) + ;; + 4) + eeprombus=$(( $eeprombusbase + 4 )) + ;; + 5) + eeprombus=$(( $eeprombusbase + 5 )) + ;; + 6) + eeprombus=$(( $eeprombusbase + 6 )) + ;; + 7) + eeprombus=$(( $eeprombusbase + 7 )) + ;; + esac + eepromAddr=${I2C_ADDR_QSFP_EEPROM} +} + +#Get QSFP EEPROM Information +function _i2c_qsfp_eeprom_get { + local value=0 + local status=0 + + echo "=========================================================" + echo "# Description: QSFP EEPROM GET" + echo "=========================================================" + + #status: 0 -> Down, 1 -> Up + _i2c_qsfp_signal_get ${QSFP_PORT} ${CPLD_QSFP_ABS} + + value=$qsfp_signal + status=$(( value?0:1 )) + + if [ $status = 0 ]; then + echo "[Fail] QSFP ${QSFP_PORT} is not present" + exit + fi + + echo "------------------------------" + cat ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom | hexdump -C +} + +#Init QSFP EEPROM +function _i2c_qsfp_eeprom_init { + echo "=========================================================" + echo "# Description: QSFP EEPROM INIT" + echo "=========================================================" + + #Action check + action=$1 + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init EEPROM + local i + for (( i=1; i<=${PORT_NUM}; i++ )) + do + _qsfp_port_i2c_var_set ${i} + + _qsfp_eeprom_var_set ${i} + + if [ "${action}" == "new" ] && \ + ! [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "sff8436 $eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr) ]; then + echo "$eepromAddr" > ${PATH_SYS_I2C_DEVICES}/i2c-$eeprombus/delete_device + fi + done +} + +#get qsfp singals (ABS, INT, RST, LP) from CPLD +function _i2c_qsfp_signal_get { + local port=$1 #port start from 1 + local signal=$2 + local attr_file="" + local phy_port=0 + local active="low_active" + + #global + qsfp_signal=0 + qsfp_signals=0 + + #verify port + if [ -z "${port}" ]; then + echo "No port, skip" + return + fi + + #verify port + if (( $port < 1 || $port > $PORT_NUM )) ; then + echo "invalid port, skip" + fi + + #get physical port + phy_port=$(_port_logic2phy $port) + + _qsfp_port_i2c_var_set ${phy_port} + _qsfp_eeprom_var_set ${phy_port} + + #verify signal + if [ -z "${signal}" ]; then + echo "No signal, skip" + return + elif [ "${signal}" == "${CPLD_QSFP_ABS}" ]; then + attr_file="qsfp_modprs" + elif [ "${signal}" == "${CPLD_QSFP_INT}" ]; then + attr_file="qsfp_int" + elif [ "${signal}" == "${CPLD_QSFP_RST}" ]; then + attr_file="qsfp_reset" + elif [ "${signal}" == "${CPLD_QSFP_LP}" ]; then + attr_file="qsfp_lpmode" + active="high_active" + else + echo "invalid signal ${signal}, skip" + return + fi + + mask=${BIT_MASK[bit_shift]} + + #signals of all ports + qsfp_signals=`cat ${PATH_SYS_CPLD}/${attr_file}` + #signal of single port + qsfp_signal=$(( (qsfp_signals >> (phy_port-1)) & 0x1)) + #print signals + printf "[port]=%d, [signal]=%s, [value]=%d (${active}), [qsfp_signals]=%016x\n" $port $signal $qsfp_signal $qsfp_signals +} + +#set qsfp singals (RST, LP) via CPLD +function _i2c_qsfp_signal_set { + local port=$1 #port start from 1 + local signal=$2 + local value=$3 + local values_ori=0 + local value_ori=0 + local values=0 + local attr_file="" + + #verify port + if [ -z "${port}" ]; then + echo "No port, skip" + return + fi + + #verify port + if (( $port < 1 || $port > $PORT_NUM )) ; then + echo "invalid port, skip" + fi + + #verify signal + if [ -z "${signal}" ]; then + echo "No signal, skip" + return + elif [ "${signal}" == "${CPLD_QSFP_RST}" ]; then + attr_file="qsfp_reset" + elif [ "${signal}" == "${CPLD_QSFP_LP}" ]; then + attr_file="qsfp_lpmode" + else + echo "invalid signal ${signal}, skip" + return + fi + + #get current signal values + _i2c_qsfp_signal_get $port $signal + value_ori=$qsfp_signal + values_ori=$qsfp_signals + + #if signal value is not changed, return + if [ "${value}" == "${value_ori}" ]; then + echo "value not changed, skip set operation" + return + fi + + #toggle the bit for update + values=$(( values_ori ^ (1 << (port-1)))) + + #set value to register + echo "$(printf "%016x" $values)" > ${PATH_SYS_CPLD}/${attr_file} + + #get updated signal values + _i2c_qsfp_signal_get $port $signal + values=$qsfp_signals + + #result + printf "Before: %016x\n" $values_ori + printf "After: %016x\n" $values +} + +#Init EEPROM +function _i2c_eeprom_init { + local i2c_bus=$1 + local i2c_addr=$2 + local action=$3 + local desc=$4 + local sys_i2c_dev=$PATH_SYS_I2C_DEVICES + + echo -n "${desc} EEPROM INIT" + + #Action check + if [ -z "${action}" ]; then + echo "No action, skip" + return + elif [ "${action}" != "new" ] && [ "${action}" != "delete" ]; then + echo "Error action, skip" + return + fi + + #Init EEPROM + if [ "${action}" == "new" ] && \ + ! [ -L ${sys_i2c_dev}/${i2c_bus}-$(printf "%04x" $i2c_addr) ]; then + echo "mb_eeprom ${i2c_addr}" > ${sys_i2c_dev}/i2c-${i2c_bus}/new_device + elif [ "${action}" == "delete" ] && \ + [ -L ${sys_i2c_dev}/${i2c_bus}-$(printf "%04x" $i2c_addr) ]; then + echo "${i2c_addr}" > ${sys_i2c_dev}/i2c-${i2c_bus}/delete_device + fi + echo "DONE" +} + +#Init Main Board EEPROM +function _i2c_mb_eeprom_init { + local action=$1 + local i2c_bus=$I2C_BUS_MB_EEPROM + local i2c_addr=$I2C_ADDR_MB_EEPROM + local desc="Main Board" + + _i2c_eeprom_init $i2c_bus $i2c_addr $action $desc +} + +#Init CPU EEPROM +function _i2c_cpu_eeprom_init { + local action=$1 + local i2c_bus=$I2C_BUS_CPU_EEPROM + local i2c_addr=$I2C_ADDR_CPU_EEPROM + local desc="CPU Board" + + _i2c_eeprom_init $i2c_bus $i2c_addr $action $desc +} + +#get QSFP Status +function _i2c_qsfp_status_get { + local value=0 + local status=0 + + #status: 0 -> Down, 1 -> Up + _i2c_qsfp_signal_get ${QSFP_PORT} ${CPLD_QSFP_ABS} + value=$qsfp_signal + status=$(( value?0:1 )) + echo "status=$status" +} + +#get QSFP Type +function _i2c_qsfp_type_get { + local phy_port=0 + local value=0 + local status=0 + + echo "=========================================================" + echo "# Description: QSFP TYPE Get" + echo "=========================================================" + + phy_port=$(_port_logic2phy ${QSFP_PORT}) + _qsfp_port_i2c_var_set ${phy_port} + _qsfp_eeprom_var_set ${phy_port} + + #get abs signal + _i2c_qsfp_signal_get ${QSFP_PORT} ${CPLD_QSFP_ABS} + value=$qsfp_signal + status=$(( value?0:1 )) + + #check qsfp is present + if [ $status = 0 ]; then + echo "[Fail] QSFP ${QSFP_PORT} is not present" + exit + fi + + #Get QSFP EEPROM info + if [ ! -e "${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf '%04x' $eepromAddr)/eeprom" ]; then + echo "FAIL, qsfp eeprom file does not exist. " + echo "qsfp eeprom file path: ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf '%04x' $eepromAddr)/eeprom" + return + fi + + qsfp_info=$(base64 ${PATH_SYS_I2C_DEVICES}/$eeprombus-$(printf "%04x" $eepromAddr)/eeprom) + + identifier=$(echo $qsfp_info | base64 -d -i | hexdump -s 128 -n 1 -e '"%x"') + connector=$(echo $qsfp_info | base64 -d -i | hexdump -s 130 -n 1 -e '"%x"') + transceiver=$(echo $qsfp_info | base64 -d -i | hexdump -s 131 -n 1 -e '"%x"') + + echo "------------------------------" + echo "identifier = $identifier" + echo "connector = $connector" + echo "transceiver = $transceiver" +} + +#Init PSU Kernel Module +function _i2c_psu_init { + echo "=========================================================" + echo "# Description: I2C PSU Init" + echo "=========================================================" + modprobe ingrasys_s9200_64x_psu + + echo "psu1 ${I2C_ADDR_PSU_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU1_EEPROM}/new_device + echo "psu2 ${I2C_ADDR_PSU_EEPROM}" > ${PATH_SYS_I2C_DEVICES}/i2c-${I2C_BUS_PSU2_EEPROM}/new_device +} + +#Get PSU EEPROM Information +function _i2c_psu_eeprom_get { + local eeprom_psu1="" + local eeprom_psu2="" + + echo "=========================================================" + echo "# Description: I2C PSU EEPROM Get..." + echo "=========================================================" + + echo "PUS1 EEPROM" + eeprom_psu1="${PATH_SYSFS_PSU1}/psu_eeprom" + cat ${eeprom_psu1} | hexdump -C + + echo "------------------------------" + echo "PUS2 EEPROM" + eeprom_psu2="${PATH_SYSFS_PSU2}/psu_eeprom" + cat ${eeprom_psu2} | hexdump -C +} + +#Get MotherBoard EEPROM Information +function _i2c_mb_eeprom_get { + local path_i2c_dev=${PATH_SYS_I2C_DEVICES} + local i2c_bus=${I2C_BUS_MB_EEPROM} + local i2c_addr=${I2C_ADDR_MB_EEPROM} + echo "=========================================================" + echo "# Description: I2C MB EEPROM Get" + echo "=========================================================" + + ## MB EEPROM + cat ${path_i2c_dev}/${i2c_bus}-$(printf "%04x" ${i2c_addr})/eeprom | hexdump -v -C +} + +#Get CPU EEPROM Information +function _i2c_cpu_eeprom_get { + local path_i2c_dev=${PATH_SYS_I2C_DEVICES} + local i2c_bus=${I2C_BUS_CPU_EEPROM} + local i2c_addr=${I2C_ADDR_CPU_EEPROM} + echo "=========================================================" + echo "# Description: I2C CPU EEPROM Get" + echo "=========================================================" + + ## CPU EEPROM + cat ${path_i2c_dev}/${i2c_bus}-$(printf "%04x" ${i2c_addr})/eeprom | hexdump -v -C +} + +#Set FAN Tray LED +function _i2c_fan_tray_led { + local value=0 + + echo "=========================================================" + echo "# Description: Set Fan Tray LED" + echo "=========================================================" + + case ${FAN_TRAY} in + 1) + ioPort=$REG_OUT_0 + if [ "${COLOR_LED}" == "green" ]; then + mask=${BIT_MASK[0]} + elif [ "${COLOR_LED}" == "amber" ]; then + mask=${BIT_MASK[1]} + fi + ;; + 2) + ioPort=$REG_OUT_0 + if [ "${COLOR_LED}" == "green" ]; then + mask=${BIT_MASK[4]} + elif [ "${COLOR_LED}" == "amber" ]; then + mask=${BIT_MASK[5]} + fi + ;; + 3) + ioPort=$REG_OUT_1 + if [ "${COLOR_LED}" == "green" ]; then + mask=${BIT_MASK[0]} + elif [ "${COLOR_LED}" == "amber" ]; then + mask=${BIT_MASK[1]} + fi + ;; + 4) + ioPort=$REG_OUT_1 + if [ "${COLOR_LED}" == "green" ]; then + mask=${BIT_MASK[4]} + elif [ "${COLOR_LED}" == "amber" ]; then + mask=${BIT_MASK[5]} + fi + ;; + *) + echo "Please input 1~4" + exit + ;; + esac + + if [ "${ONOFF_LED}" == "on" ]; then + value=0xFF + elif [ "${ONOFF_LED}" == "off" ]; then + value=0x00 + else + echo "Invalid Parameters ${ONOFF_LED}, Exit!!!" + _help + exit ${FALSE} + fi + i2cset -m $mask -y -r ${I2C_BUS_FAN_BOARD} ${I2C_ADDR_FAN_BOARD} $ioPort $value + +} + +#Set System Status LED +function _i2c_sys_led { + local value=0 + local mask=${BIT_MASK[0]} + + if [ "${COLOR_LED}" == "green" ]; then + value=0xFF + elif [ "${COLOR_LED}" == "amber" ]; then + value=0x00 + else + echo "Invalid Parameters ${COLOR_LED}, Exit!!!" + _help + exit ${FALSE} + fi + + _i2c_set_led $value $mask +} + +#Set FAN LED +function _i2c_fan_led { + local value=0 + local mask=${BIT_MASK[2]} + + if [ "${COLOR_LED}" == "green" ]; then + value=0x00 + elif [ "${COLOR_LED}" == "amber" ]; then + value=0xFF + else + echo "Invalid Parameters ${COLOR_LED}, Exit!!!" + _help + exit ${FALSE} + fi + + _i2c_set_led $value $mask +} + +#Set PSU1 LED +function _i2c_psu1_led { + local value=0 + local mask=${BIT_MASK[3]} + + if [ "${COLOR_LED}" == "green" ]; then + value=0x00 + elif [ "${COLOR_LED}" == "amber" ]; then + value=0xFF + else + echo "Invalid Parameters ${COLOR_LED}, Exit!!!" + _help + exit ${FALSE} + fi + + _i2c_set_led $value $mask +} + +#Set PSU2 LED +function _i2c_psu2_led { + local reg=${REG_OUT_0} + local value=0 + local mask=${BIT_MASK[4]} + + if [ "${COLOR_LED}" == "green" ]; then + value=0x00 + elif [ "${COLOR_LED}" == "amber" ]; then + value=0xFF + else + echo "Invalid Parameters ${COLOR_LED}, Exit!!!" + _help + exit ${FALSE} + fi + + _i2c_set_led $value $mask +} + +#Set LEDs in LED Board +function _i2c_set_led { + local value=$1 + local mask=$2 + local reg=${REG_OUT_0} + local i2c_bus=$I2C_BUS_LED_BOARD + local i2c_addr=$I2C_ADDR_LED_BOARD + + _i2c_set $i2c_bus $i2c_addr $reg $mask $value +} + +#Reset all system leds +function _i2c_reset_led { + local mask=0xFF + local value=$((2#00000011)) + local reg=${REG_OUT_0} + local i2c_bus=$I2C_BUS_LED_BOARD + local i2c_addr=$I2C_ADDR_LED_BOARD + + _i2c_set $i2c_bus $i2c_addr $reg $mask $value +} + +#Get Mother Board Version and Type +function _i2c_board_type_get { + echo "=========================================================" + echo "# Description: I2C MB Board Type Get" + echo "=========================================================" + local i2c_bus=${I2C_BUS_ID_GPIO} + local i2c_addr=${I2C_ADDR_ID_GPIO} + local reg=${REG_IN_1} + local value=0 + + value=$(_i2c_get $i2c_bus $i2c_addr $reg) + + #Bit 0-1 + boardBuildRev=$((value & 0x03)) + #Bit 2-3 + boardHwRev=$((value >> 2 & 0x03)) + #Bit 4-7 + boardId=$((value>>4)) + printf "[MB BOARD_ID] = 0x%02x, [HW Rev] = %d, [Build Rev] = %d\n" $boardId $boardHwRev $boardBuildRev +} + +#Get Board Version and Type from Dummy BMC Board +function _i2c_bmc_board_type_get { + echo "=========================================================" + echo "# Description: I2C BMC Board Type Get" + echo "=========================================================" + + local i2c_bus=${I2C_BUS_BMC_BOARD_TYPE} + local i2c_addr=${I2C_ADDR_BMC_BOARD_TYPE} + local reg=${REG_IN_1} + local value=0 + + value=$(_i2c_get $i2c_bus $i2c_addr $reg) + + #Bit 0-1 + boardBuildRev=$((($value) & 0x03)) + #Bit 2-3 + boardHwRev=$((($value) >> 2 & 0x03)) + #Bit 4-7 + boardId=$((($value) >> 4)) + printf "[BMC BOARD_ID] = 0x%02x, [HW Rev] = %d, [Build Rev] = %d\n" $boardId $boardHwRev $boardBuildRev +} + +#Get CPLD Version +function _i2c_cpld_version { + echo "=========================================================" + echo "# Description: CPLD Version" + echo "=========================================================" + cat ${PATH_SYS_CPLD}/cpld_version +} + +#Get PSU Status +function _i2c_psu_status { + local psu_abs="" + + psu1PwGood=`cat ${PATH_SYSFS_PSU1}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU1}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu1Exist=1 + else + psu1Exist=0 + fi + + psu2PwGood=`cat ${PATH_SYSFS_PSU2}/psu_pg` + psu_abs=`cat ${PATH_SYSFS_PSU2}/psu_abs` + if [ "$psu_abs" == "0" ]; then + psu2Exist=1 + else + psu2Exist=0 + fi + + printf "PSU1 Exist:%x PSU1 PW Good:%d\n" $psu1Exist $psu1PwGood + printf "PSU2 Exist:%d PSU2 PW Good:%d\n" $psu2Exist $psu2PwGood +} + +#Set 10G Mux to CPU or Front Panel +function _i2c_10g_mux { + + echo "=========================================================" + echo "# Description: 10G Mux" + echo "=========================================================" + + local target=${TARGET_10G_MUX} + local i2c_bus=${I2C_BUS_10GMUX} + local i2c_addr=${I2C_ADDR_10GMUX} + local reg=0 + local mask=0xff + local value=0 + local file_10g_mux="${PATH_SYS_CPLD}/cpld_10g_mux" + + #get current 10g mux register value on CPLD + value=`cat ${file_10g_mux}` + + if [ "${target}" == "cpu" ]; then + #Set XE0: slave address access + _i2c_set $i2c_bus $i2c_addr 0x06 $mask 0x18 + #Set XE0: CH4 D_IN0-S_OUTA0 EQ + _i2c_set $i2c_bus $i2c_addr 0x2c $mask 0x00 + #Set XE0: CH5 NC-S_OUTB0 DEM + _i2c_set $i2c_bus $i2c_addr 0x35 $mask 0x80 + #Set XE0: CH5 NC-S_OUTB0 VOD + _i2c_set $i2c_bus $i2c_addr 0x34 $mask 0xab + #Set XE0: CH1 D_OUT0-S_INB0 EQ + _i2c_set $i2c_bus $i2c_addr 0x16 $mask 0x01 + #Set XE0: CH1 D_OUT0-S_INB0 DEM + _i2c_set $i2c_bus $i2c_addr 0x18 $mask 0x80 + #Set XE0: CH1 D_OUT0-S_INB0 VOD + _i2c_set $i2c_bus $i2c_addr 0x17 $mask 0xab + #Set XE1: CH6 D_IN1-S_OUTA1 EQ + _i2c_set $i2c_bus $i2c_addr 0x3a $mask 0x00 + #Set XE1: CH7 NC-S_OUTB1 EQ + _i2c_set $i2c_bus $i2c_addr 0x41 $mask 0x00 + #Set XE1: CH7 NC-S_OUTB1 DEM + _i2c_set $i2c_bus $i2c_addr 0x43 $mask 0x80 + #Set XE1: CH7 NC-S_OUTB1 VOD + _i2c_set $i2c_bus $i2c_addr 0x42 $mask 0xab + #Set XE1: CH3 D_OUT1-S_INB1 EQ + _i2c_set $i2c_bus $i2c_addr 0x24 $mask 0x01 + #Set XE1: CH3 D_OUT1-S_INB1 DEM + _i2c_set $i2c_bus $i2c_addr 0x26 $mask 0x80 + #Set XE1: CH3 D_OUT1-S_INB1 VOD + _i2c_set $i2c_bus $i2c_addr 0x25 $mask 0xab + #Enable auto negotiation of XE ports + eval "bcmcmd 'port xe0,xe1 an=1 if=kr en=1'" + #delay 1 sec + sleep 1 + + #switch 10G MUX to cpu on CPLD + value=$(( value & 0xf3 )) + echo "$(printf "%x" ${value})" > ${file_10g_mux} + + echo "Switch 10G Mux to [CPU]" + + elif [ "${COLOR_LED}" == "fp" ]; then + #Set XE0: slave address access + _i2c_set $i2c_bus $i2c_addr 0x06 $mask 0x18 + #Set XE0: CH4 D_IN0-S_OUTA0 EQ + _i2c_set $i2c_bus $i2c_addr 0x2c $mask 0x00 + #Set XE0: CH4 D_IN0-S_OUTA0 DEM + _i2c_set $i2c_bus $i2c_addr 0x2e $mask 0x80 + #Set XE0: CH4 D_IN0-S_OUTA0 VOD + _i2c_set $i2c_bus $i2c_addr 0x2d $mask 0xab + #Set XE0: CH0 NC-S_INA0 EQ + _i2c_set $i2c_bus $i2c_addr 0x0f $mask 0x00 + #Set XE0: CH1 D_OUT0-S_INB0 DEM + _i2c_set $i2c_bus $i2c_addr 0x18 $mask 0x80 + #Set XE0: CH1 D_OUT0-S_INB0 VOD + _i2c_set $i2c_bus $i2c_addr 0x17 $mask 0xab + #Set XE1: CH6 D_IN1-S_OUTA1 EQ + _i2c_set $i2c_bus $i2c_addr 0x3a $mask 0x00 + #Set XE1: CH6 D_IN1-S_OUTA1 DEM + _i2c_set $i2c_bus $i2c_addr 0x3c $mask 0x80 + #Set XE1: CH6 D_IN1-S_OUTA1 VOD + _i2c_set $i2c_bus $i2c_addr 0x3b $mask 0xab + #Set XE1: CH2 NC-S_INA1 EQ + _i2c_set $i2c_bus $i2c_addr 0x1d $mask 0x00 + #Set XE1: CH3 D_OUT1-S_INB1 DEM + _i2c_set $i2c_bus $i2c_addr 0x26 $mask 0x80 + #Set XE1: CH3 D_OUT1-S_INB1 VOD + _i2c_set $i2c_bus $i2c_addr 0x25 $mask 0xab + #Enable auto negotiation of XE ports + eval "bcmcmd 'port xe0,xe1 an=0 if=kr en=1'" + #delay 1 sec + sleep 1 + + #switch 10G MUX to front panel on CPLD + value=$(( value | 0x0c )) + echo "$(printf "%x" ${value})" > ${file_10g_mux} + + echo "Switch 10G Mux to [Front Panel]" + else + echo "invalid target, please set target to cpu/fp" + fi +} + +#Increase read socket buffer for CoPP Test +function _config_rmem { + echo "109430400" > /proc/sys/net/core/rmem_max +} + +#Main Function +function _main { + start_time_str=`date` + start_time_sec=$(date +%s) + + if [ "${EXEC_FUNC}" == "help" ]; then + _help + elif [ "${EXEC_FUNC}" == "i2c_init" ]; then + _i2c_init + elif [ "${EXEC_FUNC}" == "i2c_deinit" ]; then + _i2c_deinit + elif [ "${EXEC_FUNC}" == "i2c_temp_init" ]; then + _i2c_temp_init + elif [ "${EXEC_FUNC}" == "i2c_fan_init" ]; then + _i2c_fan_init + elif [ "${EXEC_FUNC}" == "i2c_volmon_init" ]; then + _i2c_volmon_init + elif [ "${EXEC_FUNC}" == "i2c_io_exp_init" ]; then + _i2c_io_exp_init + elif [ "${EXEC_FUNC}" == "i2c_led_test" ]; then + _i2c_led_test + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_get" ]; then + _i2c_mb_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_cpu_eeprom_get" ]; then + _i2c_cpu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_psu_eeprom_get" ]; then + _i2c_psu_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_get" ]; then + _i2c_qsfp_eeprom_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_eeprom_init" ]; then + _i2c_qsfp_eeprom_init ${QSFP_INIT_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_mb_eeprom_init" ]; then + _i2c_mb_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_cpu_eeprom_init" ]; then + _i2c_cpu_eeprom_init ${MB_EEPROM_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_qsfp_status_get" ]; then + _i2c_qsfp_status_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_type_get" ]; then + _i2c_qsfp_type_get + elif [ "${EXEC_FUNC}" == "i2c_qsfp_signal_get" ]; then + _i2c_qsfp_signal_get ${QSFP_PORT} ${QSFP_ACTION} + elif [ "${EXEC_FUNC}" == "i2c_qsfp_signal_set" ]; then + _i2c_qsfp_signal_set ${QSFP_PORT} ${QSFP_ACTION} ${QSFP_VALUE} + elif [ "${EXEC_FUNC}" == "i2c_led_psu_status_set" ]; then + _i2c_led_psu_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_status_set" ]; then + _i2c_led_fan_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_status_set" ]; then + _i2c_led_fan_tray_status_set + elif [ "${EXEC_FUNC}" == "i2c_led_fan_tray_test" ]; then + _i2c_led_fan_tray_test + elif [ "${EXEC_FUNC}" == "i2c_sys_led" ]; then + _i2c_sys_led + elif [ "${EXEC_FUNC}" == "i2c_fan_led" ]; then + _i2c_fan_led + elif [ "${EXEC_FUNC}" == "i2c_fan_tray_led" ]; then + _i2c_fan_tray_led + elif [ "${EXEC_FUNC}" == "i2c_psu1_led" ]; then + _i2c_psu1_led + elif [ "${EXEC_FUNC}" == "i2c_psu2_led" ]; then + _i2c_psu2_led + elif [ "${EXEC_FUNC}" == "i2c_board_type_get" ]; then + _i2c_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_bmc_board_type_get" ]; then + _i2c_bmc_board_type_get + elif [ "${EXEC_FUNC}" == "i2c_cpld_version" ]; then + _i2c_cpld_version + elif [ "${EXEC_FUNC}" == "i2c_psu_status" ]; then + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_test_all" ]; then + _i2c_deinit + _i2c_init + _i2c_led_test + _i2c_psu_eeprom_get + _i2c_mb_eeprom_get + _i2c_cpu_eeprom_get + _i2c_board_type_get + _i2c_bmc_board_type_get + _i2c_cpld_version + _i2c_psu_status + elif [ "${EXEC_FUNC}" == "i2c_10g_mux" ]; then + _i2c_10g_mux + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi + + end_time_str=`date` + end_time_sec=$(date +%s) + diff_time=$[ ${end_time_sec} - ${start_time_sec} ] + echo "------------------------------" + echo "Total Execution Time: ${diff_time} sec" + + echo "DONE" +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/qsfp_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/qsfp_monitor.sh new file mode 100755 index 000000000000..51c49c1152f5 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/qsfp_monitor.sh @@ -0,0 +1,104 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=3 +I2C_UTILS="/usr/sbin/i2c_utils.sh" +QSFP_SI_SCRIPT="/usr/sbin/qsfp_si_cfg.sh" +QSFP_ARRAY=(0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 \ + 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0) + +#QSFP SI monitor +function _qsfp_si_monitor { + local i + local status + for i in {0..63}; + do + status=`${I2C_UTILS} i2c_qsfp_status_get $(expr $i + 1) | egrep '^status=.*$' | sed -e 's/status=//g'` + if [ "${status}" == "1" ]; then + _qsfp_type_check $i + fi + done +} + +#QSFP type +function _qsfp_type_check { + local port=$1 + local qsfp_type=`${I2C_UTILS} i2c_qsfp_type_get $(expr $port + 1) ` + local identifier=`echo "$qsfp_type" | egrep -o 'identifier = .*$' | sed -e 's/identifier = //g'` + if [ "${identifier}" == "11" ]; then + connector=`echo "$qsfp_type" | egrep -o 'connector = .*$' | sed -e 's/connector = //g'` + case ${connector} in + 21|23) + #DAC + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to DAC" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} dac $port >/dev/null + fi + ;; + *) + #Optical + if [ "${QSFP_ARRAY[$port]}" != "${connector}" ]; then + echo "Change Port $(expr $port + 1) to Optical" + QSFP_ARRAY[$port]=${connector} + ${QSFP_SI_SCRIPT} optical $port >/dev/null + fi + ;; + esac + fi +} + +#Docker exist check +function _docker_swss_check { + while true + do + # Check if syncd starts + result=`docker exec -i swss bash -c "echo -en \"SELECT 1\\nHLEN HIDDEN\" | redis-cli | sed -n 2p"` #TBD FIX ME + if [ "$result" == "3" ]; then + return + fi + sleep $INTERVAL + done +} + +#Docker exist check +function _qsfp_si_cfg_script_check { + + if [ -f ${QSFP_SI_SCRIPT} ] && [ -x ${QSFP_SI_SCRIPT} ]; then + echo "SI Script exists. Start monitor." + return + else + echo "SI Script not exist. Exit monitor." + exit + fi +} + +# main function +function _main { + #Check SI Script + _qsfp_si_cfg_script_check + #Check docker swss is running + _docker_swss_check + while true + do + _qsfp_si_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/qsfp_si_cfg.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/qsfp_si_cfg.sh new file mode 100755 index 000000000000..ba59c50ca7bf --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/qsfp_si_cfg.sh @@ -0,0 +1,230 @@ +#!/bin/bash +# Copyright (C) 2017 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +VERSION="1.0.0" +TRUE=200 +FALSE=404 + +TYPE=${1} +PORT=${2} + +#FIXME update SI values +#QSFP Optical +function _qsfp_optical_si_set { + local idx=0 + #FIXME + local si=(11 68 13 15 68 15 11 68 9 11 68 13 + 11 68 17 11 68 13 13 68 11 11 68 15 + 11 68 13 11 68 17 11 68 17 13 68 13 + 11 68 15 11 68 9 11 68 9 11 68 7 + 9 68 13 13 68 7 11 68 7 11 68 11 + 11 68 13 11 68 13 9 68 7 11 68 11 + 11 68 9 11 68 15 11 68 9 11 68 9 + 11 68 9 11 68 7 11 68 9 11 68 9 + 13 68 9 13 68 13 13 68 7 13 68 11 + 13 68 5 13 68 11 13 68 5 13 68 11 + + 11 68 3 11 68 9 11 68 5 11 68 13 + 11 68 9 11 68 9 11 68 11 13 68 5 + 13 68 3 11 68 7 11 68 5 11 68 9 + 11 68 9 13 68 9 13 68 1 11 68 11 + 5 68 1 11 68 7 11 68 1 13 68 3 + 11 68 5 11 68 3 11 68 7 11 68 3 + 11 68 3 13 68 11 13 68 1 13 68 3 + 11 68 1 13 68 1 13 68 1 11 68 7 + 11 68 1 11 68 5 11 68 1 9 68 5 + 5 68 1 13 68 1 11 68 5 11 68 3 + + 11 68 1 11 68 11 11 68 1 13 68 7 + 13 68 1 15 68 1 11 68 1 13 68 7 + 13 68 1 11 68 5 11 68 1 11 68 1 + 11 68 5 13 68 3 11 68 5 9 68 1 + 11 68 5 13 68 5 13 68 1 11 68 9 + 13 68 1 11 68 13 13 68 1 11 68 7 + 11 68 1 11 68 1 9 68 1 11 68 1 + 11 68 1 11 68 1 11 68 5 11 68 1 + 13 68 1 11 68 11 11 68 1 11 68 1 + 11 68 1 11 68 15 11 68 1 13 68 5 + + 11 68 1 11 68 1 9 68 1 13 68 1 + 11 68 1 11 68 1 9 68 1 11 68 1 + 11 68 1 13 68 3 11 68 1 13 68 1 + 11 68 1 13 68 1 11 68 1 11 68 13 + 11 68 1 11 68 1 11 68 1 11 68 1 + 11 68 11 11 68 1 13 68 1 11 68 1 + 11 68 1 11 68 9 11 68 1 11 68 7 + 11 68 1 13 68 1 13 68 1 11 68 1 + 11 68 1 11 68 5 11 68 1 13 68 3 + 11 68 3 9 68 1 11 68 3 11 68 1 + + 11 68 7 11 68 9 11 68 1 11 68 9 + 11 68 3 11 68 15 11 68 3 9 68 9 + 9 68 1 11 68 3 11 68 1 11 68 5 + 11 68 5 5 68 5 11 68 5 11 68 1 + 13 68 5 13 68 5 11 68 1 11 68 9 + 11 68 1 11 68 1 11 68 1 13 68 7 + 11 68 1 11 68 5 11 68 1 11 68 3 + 11 68 5 11 68 1 11 68 5 11 68 1 + 11 68 3 11 68 7 11 68 3 11 68 9 + 11 68 1 13 68 7 11 68 1 9 68 9 + + 13 68 1 11 68 5 11 68 3 13 68 5 + 11 68 7 11 68 11 13 68 5 9 68 5 + 11 68 5 11 68 13 13 68 7 11 68 13 + 11 68 7 11 68 11 11 68 5 11 68 11 + 11 68 11 11 68 11 11 68 7 11 68 11 + 11 68 13 11 68 11 11 68 9 15 68 9 + 11 68 11 11 68 5 11 68 7 13 68 11 + 11 68 9 13 68 17 11 68 7 11 68 13 + 11 68 11 11 68 17 11 68 13 11 68 15 + 13 68 9 13 68 11 11 68 11 13 68 7 + + 11 68 13 13 68 9 11 68 9 11 68 9 + 11 68 19 11 68 15 11 68 9 11 68 11 + 13 68 13 13 68 17 13 68 11 11 68 11 + 13 68 9 13 68 13 11 68 11 11 68 9) + + idx=$(( PORT * 12 )) + #FIXEME + #for j in {0..3} + #do + # bcmcmd "phy ce${PORT} CL93N72_UT_CTL2r.${j} CL93N72_TXFIR_POST=${si[idx++]}; phy ce${PORT} CL93N72_UT_CTL3r.${j} CL93N72_TXFIR_MAIN=${si[idx++]}; phy ce${PORT} CL93N72_UT_CTL2r.${j} CL93N72_TXFIR_PRE=${si[idx++]};" + #done +} + +function _qsfp_dac_si_set { + local idx=0 + # each port has 4 lanes, each lane has 3 SI values (post,main,pre), total 4*3=12 + local port_si=12 + + #si[0]: txfir_post for port0 lane0 + #si[1]: txfir_main for port0 lane0 + #si[2]: txfir_pre for port0 lane0 + + #si[3]: txfir_post for port0 lane1 + #si[4]: txfir_main for port0 lane1 + #si[5]: txfir_pre for port0 lane1 + + local si=(11 68 13 15 68 15 11 68 9 11 68 13 + 11 68 17 11 68 13 13 68 11 11 68 15 + 11 68 13 11 68 17 11 68 17 13 68 13 + 11 68 15 11 68 9 11 68 9 11 68 7 + 9 68 13 13 68 7 11 68 7 11 68 11 + 11 68 13 11 68 13 9 68 7 11 68 11 + 11 68 9 11 68 15 11 68 9 11 68 9 + 11 68 9 11 68 7 11 68 9 11 68 9 + 13 68 9 13 68 13 13 68 7 13 68 11 + 13 68 5 13 68 11 13 68 5 13 68 11 + + 11 68 3 11 68 9 11 68 5 11 68 13 + 11 68 9 11 68 9 11 68 11 13 68 5 + 13 68 3 11 68 7 11 68 5 11 68 9 + 11 68 9 13 68 9 13 68 1 11 68 11 + 5 68 1 11 68 7 11 68 1 13 68 3 + 11 68 5 11 68 3 11 68 7 11 68 3 + 11 68 3 13 68 11 13 68 1 13 68 3 + 11 68 1 13 68 1 13 68 1 11 68 7 + 11 68 1 11 68 5 11 68 1 9 68 5 + 5 68 1 13 68 1 11 68 5 11 68 3 + + 11 68 1 11 68 11 11 68 1 13 68 7 + 13 68 1 15 68 1 11 68 1 13 68 7 + 13 68 1 11 68 5 11 68 1 11 68 1 + 11 68 5 13 68 3 11 68 5 9 68 1 + 11 68 5 13 68 5 13 68 1 11 68 9 + 13 68 1 11 68 13 13 68 1 11 68 7 + 11 68 1 11 68 1 9 68 1 11 68 1 + 11 68 1 11 68 1 11 68 5 11 68 1 + 13 68 1 11 68 11 11 68 1 11 68 1 + 11 68 1 11 68 15 11 68 1 13 68 5 + + 11 68 1 11 68 1 9 68 1 13 68 1 + 11 68 1 11 68 1 9 68 1 11 68 1 + 11 68 1 13 68 3 11 68 1 13 68 1 + 11 68 1 13 68 1 11 68 1 11 68 13 + 11 68 1 11 68 1 11 68 1 11 68 1 + 11 68 11 11 68 1 13 68 1 11 68 1 + 11 68 1 11 68 9 11 68 1 11 68 7 + 11 68 1 13 68 1 13 68 1 11 68 1 + 11 68 1 11 68 5 11 68 1 13 68 3 + 11 68 3 9 68 1 11 68 3 11 68 1 + + 11 68 7 11 68 9 11 68 1 11 68 9 + 11 68 3 11 68 15 11 68 3 9 68 9 + 9 68 1 11 68 3 11 68 1 11 68 5 + 11 68 5 5 68 5 11 68 5 11 68 1 + 13 68 5 13 68 5 11 68 1 11 68 9 + 11 68 1 11 68 1 11 68 1 13 68 7 + 11 68 1 11 68 5 11 68 1 11 68 3 + 11 68 5 11 68 1 11 68 5 11 68 1 + 11 68 3 11 68 7 11 68 3 11 68 9 + 11 68 1 13 68 7 11 68 1 9 68 9 + + 13 68 1 11 68 5 11 68 3 13 68 5 + 11 68 7 11 68 11 13 68 5 9 68 5 + 11 68 5 11 68 13 13 68 7 11 68 13 + 11 68 7 11 68 11 11 68 5 11 68 11 + 11 68 11 11 68 11 11 68 7 11 68 11 + 11 68 13 11 68 11 11 68 9 15 68 9 + 11 68 11 11 68 5 11 68 7 13 68 11 + 11 68 9 13 68 17 11 68 7 11 68 13 + 11 68 11 11 68 17 11 68 13 11 68 15 + 13 68 9 13 68 11 11 68 11 13 68 7 + + 11 68 13 13 68 9 11 68 9 11 68 9 + 11 68 19 11 68 15 11 68 9 11 68 11 + 13 68 13 13 68 17 13 68 11 11 68 11 + 13 68 9 13 68 13 11 68 11 11 68 9) + + # get first si index for this port + idx=$(( PORT * port_si )) + + # loop for 4 lanes + for j in {0..3} + do + bcmcmd "phy ce${PORT} CL93N72_UT_CTL2r.${j} CL93N72_TXFIR_POST=${si[idx++]}; phy ce${PORT} CL93N72_UT_CTL3r.${j} CL93N72_TXFIR_MAIN=${si[idx++]}; phy ce${PORT} CL93N72_UT_CTL2r.${j} CL93N72_TXFIR_PRE=${si[idx++]};" + done +} + +# Help usage function +function _help { + echo "=========================================================" + echo "# Description: Help Function" + echo "=========================================================" + echo "----------------------------------------------------" + echo "EX : ${0} help" + echo " : ${0} optical [0-63]" + echo " : ${0} dac [0-63]" + echo "----------------------------------------------------" +} + +#Main Function +function _main { + + if [ "${TYPE}" == "help" ]; then + _help + elif [ "${TYPE}" == "optical" ]; then + _qsfp_optical_si_set + elif [ "${TYPE}" == "dac" ]; then + _qsfp_dac_si_set + else + echo "Invalid Parameters, Exit!!!" + _help + exit ${FALSE} + fi +} + +_main diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/s9200_64x_monitor.sh b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/s9200_64x_monitor.sh new file mode 100755 index 000000000000..974da6d5001f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-ingrasys/s9200-64x/utils/s9200_64x_monitor.sh @@ -0,0 +1,39 @@ +#!/bin/bash +# Copyright (C) 2016 Ingrasys, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +INTERVAL=5 +I2C_UTILS="/usr/sbin/i2c_utils.sh" + + +# LED status monitor +function _led_monitor { + ${I2C_UTILS} i2c_led_fan_status_set >/dev/null + ${I2C_UTILS} i2c_led_psu_status_set >/dev/null + ${I2C_UTILS} i2c_led_fan_tray_status_set >/dev/null +} + +# main function +function _main { + while true + do + _led_monitor + # Sleep while still handling signals + sleep $INTERVAL & + wait $! + done +} + +_main \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-mitac b/platform/broadcom/sonic-platform-modules-mitac deleted file mode 160000 index ed807feb6f8e..000000000000 --- a/platform/broadcom/sonic-platform-modules-mitac +++ /dev/null @@ -1 +0,0 @@ -Subproject commit ed807feb6f8efc612ae57dea3123256d972506c5 diff --git a/platform/broadcom/sonic-platform-modules-mitac/.gitignore b/platform/broadcom/sonic-platform-modules-mitac/.gitignore new file mode 100644 index 000000000000..38e72f05332d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/.gitignore @@ -0,0 +1,17 @@ +# Build file +ly1200-32x/modules/*.mod.c +ly1200-32x/modules/*.mod.o +ly1200-32x/modules/*.o +ly1200-32x/modules/*.ko +ly1200-32x/modules/*.cmd +ly1200-32x/modules/Module.symvers +ly1200-32x/modules/modules.order +ly1200-32x/modules/.tmp_versions + +debian/sonic-platform-mitac-ly1200-32x/ +debian/sonic-platform-mitac-ly1200-32x.debhelper.log +debian/sonic-platform-mitac-ly1200-32x.postinst.debhelper +debian/sonic-platform-mitac-ly1200-32x.postrm.debhelper +debian/sonic-platform-mitac-ly1200-32x.prerm.debhelper +debian/sonic-platform-mitac-ly1200-32x.substvars +debian/files diff --git a/platform/broadcom/sonic-platform-modules-mitac/LICENSE b/platform/broadcom/sonic-platform-modules-mitac/LICENSE new file mode 100644 index 000000000000..c07c63913aeb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/LICENSE @@ -0,0 +1,16 @@ +Copyright (C) 2016 Microsoft, Inc +Copyright (C) 2018 MiTAC Technology Corporation + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/broadcom/sonic-platform-modules-mitac/README.md b/platform/broadcom/sonic-platform-modules-mitac/README.md new file mode 100644 index 000000000000..d7d47a58debf --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/README.md @@ -0,0 +1 @@ +platform drivers of MiTAC products for the SONiC project diff --git a/platform/broadcom/sonic-platform-modules-mitac/debian/changelog b/platform/broadcom/sonic-platform-modules-mitac/debian/changelog new file mode 100644 index 000000000000..592bb3a71134 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/debian/changelog @@ -0,0 +1,5 @@ +sonic-mitac-platform-modules (1.0) unstable; urgency=low + + * Initial release + + -- MiTAC Network Thu, 01 Sep 2017 11:26:38 +0800 diff --git a/platform/broadcom/sonic-platform-modules-mitac/debian/compat b/platform/broadcom/sonic-platform-modules-mitac/debian/compat new file mode 100644 index 000000000000..ec635144f600 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/debian/compat @@ -0,0 +1 @@ +9 diff --git a/platform/broadcom/sonic-platform-modules-mitac/debian/control b/platform/broadcom/sonic-platform-modules-mitac/debian/control new file mode 100644 index 000000000000..8e20f8524d74 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/debian/control @@ -0,0 +1,12 @@ +Source: sonic-mitac-platform-modules +Section: main +Priority: extra +Maintainer: MiTAC network +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: sonic-platform-mitac-ly1200-32x +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + diff --git a/platform/broadcom/sonic-platform-modules-mitac/debian/rules b/platform/broadcom/sonic-platform-modules-mitac/debian/rules new file mode 100755 index 000000000000..7f9f99827d21 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/debian/rules @@ -0,0 +1,41 @@ +#!/usr/bin/make -f + +export INSTALL_MOD_DIR:=extra + +PACKAGE_PRE_NAME := sonic-platform-mitac +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MOD_SRC_DIR:= $(shell pwd) +MODULE_DIRS:= ly1200-32x + +%: + dh $@ + +override_dh_auto_build: + (for mod in $(MODULE_DIRS); do \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ + done) + +override_dh_auto_install: + (for mod in $(MODULE_DIRS); do \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod}\ + $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod}/usr/local/bin;\ + cp $(MOD_SRC_DIR)/$${mod}/modules/*.ko \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + mkdir -p debian/$(PACKAGE_PRE_NAME)-$${mod}/opt; \ + cp -rfL $(MOD_SRC_DIR)/$${mod}/opt/* \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/opt; \ + mkdir -p debian/$(PACKAGE_PRE_NAME)-$${mod}/etc/init.d; \ + cp -rfL $(MOD_SRC_DIR)/$${mod}/etc/* \ + debian/$(PACKAGE_PRE_NAME)-$${mod}/etc; \ + done) + +override_dh_usrlocal: + +override_dh_clean: + dh_clean + (for mod in $(MODULE_DIRS); do \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules clean; \ + done) + diff --git a/platform/broadcom/sonic-platform-modules-mitac/debian/sonic-platform-mitac-ly1200-32x.init b/platform/broadcom/sonic-platform-modules-mitac/debian/sonic-platform-mitac-ly1200-32x.init new file mode 100644 index 000000000000..d2f7dbf610ab --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/debian/sonic-platform-mitac-ly1200-32x.init @@ -0,0 +1,51 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup ly1200-32x board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + echo 0 > /proc/sys/kernel/perf_cpu_time_max_percent + + /etc/init.d/gpe start + /etc/init.d/i2c_init start + /etc/init.d/sys_polld start + /opt/script/start_watchdog.sh & + /opt/script/start_service.sh & + echo "done." + ;; + +stop) + echo -n "cleaning... " + + /etc/init.d/gpe stop + /etc/init.d/i2c_init stop + /etc/init.d/xcvr_servd stop + /etc/init.d/sys_servd stop + /etc/init.d/sys_polld stop + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/sonic-platform-mitac-ly1200-32x.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-mitac/debian/sonic-platform-mitac-ly1200-32x.upstart b/platform/broadcom/sonic-platform-modules-mitac/debian/sonic-platform-mitac-ly1200-32x.upstart new file mode 100644 index 000000000000..39533b8226af --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/debian/sonic-platform-mitac-ly1200-32x.upstart @@ -0,0 +1,5 @@ +description "SONiC platform service" + +respawn + +exec /etc/init.d/sonic-platform-mitac-ly1200-32x start diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/fan-ctrld b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/fan-ctrld new file mode 100755 index 000000000000..936f01e8b640 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/fan-ctrld @@ -0,0 +1,35 @@ +#!/bin/bash +### BEGIN INIT INFO +# Provides: fan-ctrld +# Required-Start: +# Required-Stop: +# Default-Start: rc.local +# Default-Stop: +# Short-Description: Daemon fan-ctrld +### END INIT INFO + +N=/etc/init.d/fan-ctrld +D_PATH=/opt/fan-ctrl/fan-ctrl + +set -e + +stop_fan_ctrld () { + pkill -f $D_PATH +} + +case "$1" in + start) + $D_PATH & + ;; + stop) + stop_fan_ctrld + ;; + reload|restart|force-reload) + ;; + *) + echo "Usage: $N {start}" >&2 + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/gpe b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/gpe new file mode 100755 index 000000000000..c326442db047 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/gpe @@ -0,0 +1,39 @@ +#! /bin/bash +### BEGIN INIT INFO +# Provides: gpe +# Required-Start: +# Required-Stop: +# Default-Start: rc.local +# Default-Stop: +# Short-Description: Daemon gpe +### END INIT INFO + +# Load kernel modules +load_module () { + if [ `lsmod | grep -c "gpe "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_gpe.ko + fi +} + +remove_module () { + rmmod mitac-ly1200-32x_gpe +} + +case "$1" in + start) + load_module + ;; + stop) + remove_module + ;; + reload|restart|force-reload) + remove_module + load_module + ;; + *) + echo "Usage: $N {start|stop|reload|restart|force-reload}" >&2 + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/i2c_init b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/i2c_init new file mode 100755 index 000000000000..caddfce3325d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/i2c_init @@ -0,0 +1,214 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup ly1200-32x board. +### END INIT INFO + +I2C_I801_RM_PRINT=0 +I2C_ISMT_RM_PRINT=0 +I2C_I801_INS_PRINT=0 +I2C_ISMT_INS_PRINT=0 +I2C_I801_RM_RETRY=0 +I2C_ISMT_RM_RETRY=0 +I2C_I801_INS_RETRY=0 +I2C_ISMT_INS_RETRY=0 +RETRY=3 + +# process name/id +DAEMON_NAME=`basename $0` +DAEMON_PID="$$" + +# default log file +DEF_LOG_FILE="/var/log/syslog" + +#/* +#* FEATURE: +#* log_msg +#* PURPOSE: +#* log message +#* PARAMETERS: +#* msg (IN) message +#* RETURNS: +#* +#*/ +function log_msg() { + local msg=$1 + + echo -e "`date +"%b %_d %T"` `hostname` $DAEMON_NAME[$DAEMON_PID]: ${msg}" >> ${DEF_LOG_FILE} +} + + +# Load kernel modules +load_modules () { + #----------remove i801 start--------------------- + if [ `lsmod | grep -c "i2c_i801 "` -eq 1 ]; then + rmmod i2c_i801 + while [ `lsmod | grep -c "i2c_i801 "` -eq 1 ] + do + if [ $I2C_I801_RM_PRINT -eq 0 ]; then + I2C_I801_RM_PRINT=1 + log_msg "Wait for i2c_i801 remove." + fi + if [ $I2C_I801_RM_RETRY -lt $RETRY ];then + I2C_I801_RM_RETRY=$((I2C_I801_RM_RETRY + 1)) + else + break + fi + sleep 1 + done + if [ $I2C_I801_RM_PRINT -eq 1 ]; then + log_msg "i2c_i801 remove success." + fi + fi + #----------remove i801 end------------------------ + + + #----------remove ismt start---------------------- + if [ `lsmod | grep -c "i2c_ismt "` -eq 1 ]; then + rmmod i2c_ismt + while [ `lsmod | grep -c "i2c_ismt "` -eq 1 ] + do + if [ $I2C_ISMT_RM_PRINT -eq 0 ]; then + I2C_ISMT_RM_PRINT=1 + log_msg "Wait for i2c_ismt remove." + fi + if [ $I2C_ISMT_RM_RETRY -lt $RETRY ];then + I2C_ISMT_RM_RETRY=$((I2C_ISMT_RM_RETRY + 1)) + else + break + fi + sleep 1 + done + if [ $I2C_ISMT_RM_PRINT -eq 1 ]; then + log_msg "i2c_ismt remove success." + fi + fi + #----------remove ismt end------------------------ + + #----------insert i801 start---------------------- + insmod /lib/modules/`uname -r`/kernel/drivers/i2c/busses/i2c-i801.ko + while [ `lsmod | grep -c "i2c_i801 "` -eq 0 ] + do + if [ $I2C_I801_INS_PRINT -eq 0 ]; then + I2C_I801_INS_PRINT=1 + log_msg "Wait for i2c_i801 insert." + fi + if [ $I2C_I801_INS_RETRY -lt $RETRY ];then + I2C_I801_INS_RETRY=$((I2C_I801_INS_RETRY + 1)) + else + break + fi + sleep 1 + done + if [ $I2C_I801_INS_PRINT -eq 1 ]; then + log_msg "i2c_i801 insert success." + fi + #----------insert i801 end------------------------ + + #----------insert ismt start---------------------- + insmod /lib/modules/`uname -r`/kernel/drivers/i2c/busses/i2c-ismt.ko + while [ `lsmod | grep -c "i2c_ismt "` -eq 0 ] + do + if [ $I2C_ISMT_INS_PRINT -eq 0 ]; then + I2C_ISMT_INS_PRINT=1 + log_msg "Wait for i2c_ismt insert." + fi + if [ $I2C_ISMT_INS_RETRY -lt $RETRY ];then + I2C_ISMT_INS_RETRY=$((I2C_ISMT_INS_RETRY + 1)) + else + break + fi + sleep 1 + done + if [ $I2C_ISMT_INS_PRINT -eq 1 ]; then + log_msg "i2c_ismt insert success." + fi + #----------insert ismt start------------------------ + if [ `lsmod | grep -c "at24 "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/kernel/drivers/misc/eeprom/at24.ko + fi + if [ `lsmod | grep -c "i2c_mux "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/kernel/drivers/i2c/i2c-mux.ko + fi + if [ `lsmod | grep -c "i2c_mux_pca954x "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/kernel/drivers/i2c/muxes/i2c-mux-pca954x.ko + fi + if [ `lsmod | grep -c "lm75 "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/kernel/drivers/hwmon/lm75.ko + fi + if [ `lsmod | grep -c "max31790 "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/kernel/drivers/hwmon/max31790.ko + fi + if [ `lsmod | grep -c "sff_8436_eeprom "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/kernel/drivers/misc/eeprom/sff_8436_eeprom.ko + fi + if [ `lsmod | grep -c "mitac_ly1200_32x_fse000 "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_fse000.ko + fi + if [ `lsmod | grep -c "mitac_ly1200_32x_system_cpld "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_system_cpld.ko + fi + if [ `lsmod | grep -c "mitac_ly1200_32x_master_cpld "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_master_cpld.ko + fi + if [ `lsmod | grep -c "mitac_ly1200_32x_slave_cpld "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_slave_cpld.ko + fi + if [ `lsmod | grep -c "mitac_ly1200_32x_cb_i2c "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_cb_i2c.ko + fi + if [ `lsmod | grep -c "mitac_ly1200_32x_sb_i2c "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_sb_i2c.ko + fi + if [ `lsmod | grep -c "mitac_ly1200_32x_pb_i2c "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_pb_i2c.ko + fi + if [ `lsmod | grep -c "mitac_ly1200_32x_fb_i2c "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_fb_i2c.ko + fi + if [ `lsmod | grep -c "mitac_ly1200_32x_fb_module_i2c "` -eq 0 ]; then + insmod /lib/modules/`uname -r`/extra/mitac_ly1200_32x_fb_module_i2c.ko + fi +} + +# Load i2c_dev modules +load_i2c_dev_modules () { + if [ `lsmod | grep -c "i2c_dev "` -eq 0 ]; then + modprobe i2c_dev + fi +} + +case "$1" in +start) + echo -n "Setting up board... " + load_i2c_dev_modules + load_modules + echo "done." + ;; + +stop) + echo -n "cleaning... " + + + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/i2c_init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/sys_polld b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/sys_polld new file mode 100755 index 000000000000..1df43346f257 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/sys_polld @@ -0,0 +1,48 @@ +#!/bin/bash +### BEGIN INIT INFO +# Provides: sys-polld +# Required-Start: +# Required-Stop: +# Default-Start: rc.local +# Default-Stop: +# Short-Description: Daemon sys-polld +### END INIT INFO + +N=/etc/init.d/sys-polld +D_PATH=/opt/system-check/system-check.sh + +set -e + +stop_syspolld () { + local GCOUNT=`ps aux | grep -c "$D_PATH"` + local KILL_COUNT=0 + + while [ $GCOUNT -gt 1 ] + do + local ID=`ps aux | grep "$D_PATH" | head -n 1 | awk -F' ' '{print $2}'` + kill -15 $ID + GCOUNT=`ps aux | grep -c "$D_PATH"` + KILL_COUNT=`expr $KILL_COUNT + 1` + if [ $KILL_COUNT -eq 100 ]; then + echo "Error: kill sys-polld $KILL_COUNT times. stop kill process." + GCOUNT=0 + fi + done +} + +case "$1" in + start) + $D_PATH & + ;; + stop) + stop_syspolld + ;; + reload|restart|force-reload) + ;; + *) + echo "Usage: $N {start}" >&2 + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/sys_servd b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/sys_servd new file mode 100755 index 000000000000..09ee087d5db0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/sys_servd @@ -0,0 +1,28 @@ +#!/bin/sh +### BEGIN INIT INFO +# Provides: sys-servd +# Required-Start: $remote_fs $syslog +# Required-Stop: $remote_fs $syslog +# Default-Start: rc.local +# Default-Stop: 0 1 6 +# Short-Description: Daemon sys-servd +### END INIT INFO + +# Author: Eddy Weng + +DESC="Service script for /opt/sys-serv/sys-servd" +DAEMON=/opt/sys-serv/sys-servd + +case "$1" in + start) + start-stop-daemon --start --exec $DAEMON + ;; + stop) + start-stop-daemon --stop --name sys-servd + ;; + *) + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/xcvr_servd b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/xcvr_servd new file mode 100755 index 000000000000..1558614fd43c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/init.d/xcvr_servd @@ -0,0 +1,28 @@ +#!/bin/sh +### BEGIN INIT INFO +# Provides: xcvr-servd +# Required-Start: $remote_fs $syslog +# Required-Stop: $remote_fs $syslog +# Default-Start: rc.local +# Default-Stop: 0 1 6 +# Short-Description: Daemon xcvr-servd +### END INIT INFO + +# Author: Yencheng Lin + +DESC="Service script for /opt/xcvr-serv/xcvr-servd" +DAEMON=/opt/xcvr-serv/xcvr-servd + +case "$1" in + start) + start-stop-daemon --start --exec $DAEMON + ;; + stop) + start-stop-daemon --stop --name xcvr-servd + ;; + *) + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc0.d/K02xcvr_servd b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc0.d/K02xcvr_servd new file mode 120000 index 000000000000..d71f756d3deb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc0.d/K02xcvr_servd @@ -0,0 +1 @@ +../init.d/xcvr_servd \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc1.d/K02xcvr_servd b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc1.d/K02xcvr_servd new file mode 120000 index 000000000000..d71f756d3deb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc1.d/K02xcvr_servd @@ -0,0 +1 @@ +../init.d/xcvr_servd \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc6.d/K02xcvr_servd b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc6.d/K02xcvr_servd new file mode 120000 index 000000000000..d71f756d3deb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/etc/rc6.d/K02xcvr_servd @@ -0,0 +1 @@ +../init.d/xcvr_servd \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/Makefile b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/Makefile new file mode 100644 index 000000000000..fc3f88de8eb3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/Makefile @@ -0,0 +1,5 @@ +obj-m:=mitac_ly1200_32x_fb_i2c.o mitac_ly1200_32x_fse000.o \ +mitac_ly1200_32x_master_cpld.o mitac_ly1200_32x_sb_i2c.o \ +mitac_ly1200_32x_system_cpld.o mitac_ly1200_32x_cb_i2c.o \ +mitac_ly1200_32x_fb_module_i2c.o mitac_ly1200_32x_gpe.o \ +mitac_ly1200_32x_pb_i2c.o mitac_ly1200_32x_slave_cpld.o diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/bms_i2c.h b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/bms_i2c.h new file mode 100644 index 000000000000..dd63607f39c7 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/bms_i2c.h @@ -0,0 +1,26 @@ +#ifndef _BMS_I2C_H_ +#define _BMS_I2C_H_ + +const char *bms_i2c_adapter_names[] = { + "SMBus I801 adapter", + "SMBus iSMT adapter", +}; + +enum i2c_adapter_type { + I2C_ADAPTER_I801 = 0, + I2C_ADAPTER_ISMT, +}; + +enum bms_module_switch_bus { + I2C_STAGE1_MUX_CHAN0 = 0, + I2C_STAGE1_MUX_CHAN1, + I2C_STAGE1_MUX_CHAN2, + I2C_STAGE1_MUX_CHAN3, + I2C_STAGE1_MUX_CHAN4, + I2C_STAGE1_MUX_CHAN5, + I2C_STAGE1_MUX_CHAN6, + I2C_STAGE1_MUX_CHAN7, +}; + +#endif /* _BMS_I2C_H_ */ + diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/master_cpld_reg.h b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/master_cpld_reg.h new file mode 100644 index 000000000000..dfdc89dbe57d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/master_cpld_reg.h @@ -0,0 +1,275 @@ +#ifndef __MASTER_CPLD_REG +#define __MASTER_CPLD_REG + +static int master_cpld_raw_read(struct device *dev, struct device_attribute *attr, char *buf, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name); +static int master_cpld_raw_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name); + +/* generic CPLD read function */ +#define FLD_RAW_RD_FUNC(_reg, _fld, _wdh) static ssize_t \ +master_cpld_##_fld##_raw_read(struct device *dev, struct device_attribute *attr, char *buf) { \ + return master_cpld_raw_read(dev, attr, buf, _reg##_offset, _reg##_width, _fld##_shift, _fld##_width, _fld##_mask, #_reg); \ +} + +/* generic CPLD write function */ +#define FLD_RAW_WR_FUNC(_reg, _fld, _wdh) static ssize_t \ +master_cpld_##_fld##_raw_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { \ + return master_cpld_raw_write(dev, attr, buf, count, _reg##_offset, _reg##_width, _fld##_shift, _fld##_width, _fld##_mask, #_reg); \ +} + +/* CPLD register definition macros */ +#define REG_DEF(_reg, _off, _wdh) \ +static unsigned int _reg##_offset = (unsigned int)(_off); \ +static unsigned int _reg##_width = (unsigned int)(_wdh); + +/* CPLD register field definition macros, with generic read/write function */ +#define FLD_RAW_RO_DEF(_reg, _fld, _sft, _wdh) \ +static unsigned int _fld##_shift = (unsigned int)(_sft); \ +static unsigned int _fld##_width = (unsigned int)(_wdh); \ +static unsigned int _fld##_mask = ((((unsigned int)1) << (_wdh)) - 1); \ +FLD_RAW_RD_FUNC(_reg, _fld, _wdh) + +#define FLD_RAW_RW_DEF(_reg, _fld, _sft, _wdh) \ +static unsigned int _fld##_shift = (unsigned int)(_sft); \ +static unsigned int _fld##_width = (unsigned int)(_wdh); \ +static unsigned int _fld##_mask = ((((unsigned int)1) << (_wdh)) - 1); \ +FLD_RAW_RD_FUNC(_reg, _fld, _wdh) FLD_RAW_WR_FUNC(_reg, _fld, _wdh) + +/* declare master CPLD registers */ +/* register name offset width */ +/* --------------------------------------- ------- ----- */ +REG_DEF( mstr_cpld_rev, 0x00, 8) +REG_DEF( mstr_cpld_gpr, 0x01, 8) +REG_DEF( mb_brd_rev_type, 0x02, 8) +REG_DEF( mstr_srr, 0x03, 8) +REG_DEF( eeprom_wp, 0x04, 8) +REG_DEF( mstr_irq, 0x05, 8) +REG_DEF( system_led, 0x06, 8) +REG_DEF( fan_tray_3_1_led, 0x07, 8) +REG_DEF( fan_tray_6_4_led, 0x08, 8) +REG_DEF( fan_tray_status, 0x09, 8) +REG_DEF( fan_type_status, 0x0A, 8) +REG_DEF( psu_en_status, 0x0B, 8) +REG_DEF( mb_pwr_en_status, 0x0C, 8) +REG_DEF( mb_pwr_status, 0x0D, 8) + +REG_DEF( zqsfp28_present_8_1_status, 0x10, 8) +REG_DEF( zqsfp28_present_16_9_status, 0x11, 8) +REG_DEF( zqsfp28_rst_8_1, 0x12, 8) +REG_DEF( zqsfp28_rst_16_9, 0x13, 8) +REG_DEF( zqsfp28_modsel_8_1, 0x14, 8) +REG_DEF( zqsfp28_modsel_16_9, 0x15, 8) +REG_DEF( zqsfp28_lpmode_8_1, 0x16, 8) +REG_DEF( zqsfp28_lpmode_16_9, 0x17, 8) +REG_DEF( zqsfp28_irq_8_1_status, 0x18, 8) +REG_DEF( zqsfp28_irq_16_9_status, 0x19, 8) +REG_DEF( zqsfp28_irq_msk_8_1_status, 0x1A, 8) +REG_DEF( zqsfp28_irq_msk_16_9_status, 0x1B, 8) + + +/* declare master CPLD register's fields */ +/* register name field name shift width */ +/* ---------------------- ---------------- ------ ----- */ +FLD_RAW_RO_DEF( mstr_cpld_rev, mjr_rev, 4, 4) +FLD_RAW_RO_DEF( mstr_cpld_rev, mnr_rev, 0, 4) + +FLD_RAW_RW_DEF( mstr_cpld_gpr, scrtch_reg, 0, 8) + +FLD_RAW_RO_DEF( mb_brd_rev_type, brd_rev, 4, 4) +FLD_RAW_RO_DEF( mb_brd_rev_type, brd_type, 0, 4) + +FLD_RAW_RW_DEF( mstr_srr, mb_rst, 2, 1) +FLD_RAW_RW_DEF( mstr_srr, npu_rst, 1, 1) +FLD_RAW_RW_DEF( mstr_srr, mgmt_phy_rst, 0, 1) + +FLD_RAW_RW_DEF( eeprom_wp, mb_eeprom_wp, 2, 1) +FLD_RAW_RW_DEF( eeprom_wp, cpld_spi_wp, 1, 1) +FLD_RAW_RW_DEF( eeprom_wp, fan_eeprom_wp, 0, 1) + +FLD_RAW_RW_DEF( mstr_irq, ps2_int_msk, 7, 1) +FLD_RAW_RW_DEF( mstr_irq, ps1_int_msk, 6, 1) +FLD_RAW_RW_DEF( mstr_irq, usb_fault_msk, 5, 1) +FLD_RAW_RW_DEF( mstr_irq, pcie_int_msk, 4, 1) +FLD_RAW_RW_DEF( mstr_irq, fan_alert_int_msk, 3, 1) +FLD_RAW_RO_DEF( mstr_irq, usb_fault, 2, 1) +FLD_RAW_RO_DEF( mstr_irq, pcie_int, 1, 1) +FLD_RAW_RO_DEF( mstr_irq, fan_alert_int, 0, 1) + +FLD_RAW_RW_DEF( system_led, system_led_fld, 6, 2) +FLD_RAW_RW_DEF( system_led, power_led, 4, 2) +FLD_RAW_RW_DEF( system_led, fan_led, 2, 2) +FLD_RAW_RW_DEF( system_led, locate_led, 1, 1) + +FLD_RAW_RW_DEF( fan_tray_3_1_led, led_test, 6, 2) +FLD_RAW_RW_DEF( fan_tray_3_1_led, fan_tray3_led, 4, 2) +FLD_RAW_RW_DEF( fan_tray_3_1_led, fan_tray2_led, 2, 2) +FLD_RAW_RW_DEF( fan_tray_3_1_led, fan_tray1_led, 0, 2) + +FLD_RAW_RW_DEF( fan_tray_6_4_led, fan_tray6_led, 4, 2) +FLD_RAW_RW_DEF( fan_tray_6_4_led, fan_tray5_led, 2, 2) +FLD_RAW_RW_DEF( fan_tray_6_4_led, fan_tray4_led, 0, 2) + +FLD_RAW_RO_DEF( fan_tray_status, fan_tray6_present, 5, 1) +FLD_RAW_RO_DEF( fan_tray_status, fan_tray5_present, 4, 1) +FLD_RAW_RO_DEF( fan_tray_status, fan_tray4_present, 3, 1) +FLD_RAW_RO_DEF( fan_tray_status, fan_tray3_present, 2, 1) +FLD_RAW_RO_DEF( fan_tray_status, fan_tray2_present, 1, 1) +FLD_RAW_RO_DEF( fan_tray_status, fan_tray1_present, 0, 1) + +FLD_RAW_RO_DEF( fan_type_status, fan_type6, 5, 1) +FLD_RAW_RO_DEF( fan_type_status, fan_type5, 4, 1) +FLD_RAW_RO_DEF( fan_type_status, fan_type4, 3, 1) +FLD_RAW_RO_DEF( fan_type_status, fan_type3, 2, 1) +FLD_RAW_RO_DEF( fan_type_status, fan_type2, 1, 1) +FLD_RAW_RO_DEF( fan_type_status, fan_type1, 0, 1) + +FLD_RAW_RO_DEF( psu_en_status, ps1_ps, 7, 1) +FLD_RAW_RO_DEF( psu_en_status, ps1_pg, 6, 1) +FLD_RAW_RO_DEF( psu_en_status, ps1_int, 5, 1) +FLD_RAW_RW_DEF( psu_en_status, ps1_on, 4, 1) +FLD_RAW_RO_DEF( psu_en_status, ps2_ps, 3, 1) +FLD_RAW_RO_DEF( psu_en_status, ps2_pg, 2, 1) +FLD_RAW_RO_DEF( psu_en_status, ps2_int, 1, 1) +FLD_RAW_RW_DEF( psu_en_status, ps2_on, 0, 1) + +FLD_RAW_RW_DEF( mb_pwr_en_status, usb1_vbus_en, 7, 1) +FLD_RAW_RO_DEF( mb_pwr_en_status, v5p0_en, 5, 1) +FLD_RAW_RO_DEF( mb_pwr_en_status, v3p3_en, 4, 1) +FLD_RAW_RO_DEF( mb_pwr_en_status, vcc_1v8_en, 3, 1) +FLD_RAW_RO_DEF( mb_pwr_en_status, mac_avs1v_en, 2, 1) +FLD_RAW_RO_DEF( mb_pwr_en_status, mac1v_en, 1, 1) +FLD_RAW_RO_DEF( mb_pwr_en_status, vcc_1v25_en, 0, 1) + +FLD_RAW_RO_DEF( mb_pwr_status, vcc_3p3_cpld, 6, 1) +FLD_RAW_RO_DEF( mb_pwr_status, vcc5v_pg, 5, 1) +FLD_RAW_RO_DEF( mb_pwr_status, vcc3v3_pg, 4, 1) +FLD_RAW_RO_DEF( mb_pwr_status, vcc_1v8_pg, 3, 1) +FLD_RAW_RO_DEF( mb_pwr_status, mac_avs1v_pg, 2, 1) +FLD_RAW_RO_DEF( mb_pwr_status, mac1v_pg, 1, 1) +FLD_RAW_RO_DEF( mb_pwr_status, vcc_1v25_pg, 0, 1) + +FLD_RAW_RO_DEF( zqsfp28_present_8_1_status, port8_present, 7, 1) +FLD_RAW_RO_DEF( zqsfp28_present_8_1_status, port7_present, 6, 1) +FLD_RAW_RO_DEF( zqsfp28_present_8_1_status, port6_present, 5, 1) +FLD_RAW_RO_DEF( zqsfp28_present_8_1_status, port5_present, 4, 1) +FLD_RAW_RO_DEF( zqsfp28_present_8_1_status, port4_present, 3, 1) +FLD_RAW_RO_DEF( zqsfp28_present_8_1_status, port3_present, 2, 1) +FLD_RAW_RO_DEF( zqsfp28_present_8_1_status, port2_present, 1, 1) +FLD_RAW_RO_DEF( zqsfp28_present_8_1_status, port1_present, 0, 1) + +FLD_RAW_RO_DEF( zqsfp28_present_16_9_status,port16_present, 7, 1) +FLD_RAW_RO_DEF( zqsfp28_present_16_9_status,port15_present, 6, 1) +FLD_RAW_RO_DEF( zqsfp28_present_16_9_status,port14_present, 5, 1) +FLD_RAW_RO_DEF( zqsfp28_present_16_9_status,port13_present, 4, 1) +FLD_RAW_RO_DEF( zqsfp28_present_16_9_status,port12_present, 3, 1) +FLD_RAW_RO_DEF( zqsfp28_present_16_9_status,port11_present, 2, 1) +FLD_RAW_RO_DEF( zqsfp28_present_16_9_status,port10_present, 1, 1) +FLD_RAW_RO_DEF( zqsfp28_present_16_9_status,port9_present, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_rst_8_1, port8_rst, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_8_1, port7_rst, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_8_1, port6_rst, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_8_1, port5_rst, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_8_1, port4_rst, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_8_1, port3_rst, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_8_1, port2_rst, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_8_1, port1_rst, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_rst_16_9, port16_rst, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_16_9, port15_rst, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_16_9, port14_rst, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_16_9, port13_rst, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_16_9, port12_rst, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_16_9, port11_rst, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_16_9, port10_rst, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_16_9, port9_rst, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_modsel_8_1, port8_modsel, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_8_1, port7_modsel, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_8_1, port6_modsel, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_8_1, port5_modsel, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_8_1, port4_modsel, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_8_1, port3_modsel, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_8_1, port2_modsel, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_8_1, port1_modsel, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_modsel_16_9, port16_modsel, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_16_9, port15_modsel, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_16_9, port14_modsel, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_16_9, port13_modsel, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_16_9, port12_modsel, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_16_9, port11_modsel, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_16_9, port10_modsel, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_16_9, port9_modsel, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_lpmode_8_1, port8_lpmode, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_8_1, port7_lpmode, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_8_1, port6_lpmode, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_8_1, port5_lpmode, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_8_1, port4_lpmode, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_8_1, port3_lpmode, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_8_1, port2_lpmode, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_8_1, port1_lpmode, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_lpmode_16_9, port16_lpmode, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_16_9, port15_lpmode, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_16_9, port14_lpmode, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_16_9, port13_lpmode, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_16_9, port12_lpmode, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_16_9, port11_lpmode, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_16_9, port10_lpmode, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_16_9, port9_lpmode, 0, 1) + +FLD_RAW_RO_DEF( zqsfp28_irq_8_1_status, port8_irq_status, 7, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_8_1_status, port7_irq_status, 6, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_8_1_status, port6_irq_status, 5, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_8_1_status, port5_irq_status, 4, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_8_1_status, port4_irq_status, 3, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_8_1_status, port3_irq_status, 2, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_8_1_status, port2_irq_status, 1, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_8_1_status, port1_irq_status, 0, 1) + +FLD_RAW_RO_DEF( zqsfp28_irq_16_9_status, port16_irq_status, 7, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_16_9_status, port15_irq_status, 6, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_16_9_status, port14_irq_status, 5, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_16_9_status, port13_irq_status, 4, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_16_9_status, port12_irq_status, 3, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_16_9_status, port11_irq_status, 2, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_16_9_status, port10_irq_status, 1, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_16_9_status, port9_irq_status, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_irq_msk_8_1_status, port8_irq_msk, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_8_1_status, port7_irq_msk, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_8_1_status, port6_irq_msk, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_8_1_status, port5_irq_msk, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_8_1_status, port4_irq_msk, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_8_1_status, port3_irq_msk, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_8_1_status, port2_irq_msk, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_8_1_status, port1_irq_msk, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_irq_msk_16_9_status,port16_irq_msk, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_16_9_status,port15_irq_msk, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_16_9_status,port14_irq_msk, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_16_9_status,port13_irq_msk, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_16_9_status,port12_irq_msk, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_16_9_status,port11_irq_msk, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_16_9_status,port10_irq_msk, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_16_9_status,port9_irq_msk, 0, 1) + +FLD_RAW_RO_DEF( zqsfp28_present_8_1_status, port_1_8_present, 0, 8) +FLD_RAW_RO_DEF( zqsfp28_present_16_9_status,port_9_16_present, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_rst_8_1, port_1_8_rst, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_rst_16_9, port_9_16_rst, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_modsel_8_1, port_1_8_modsel, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_modsel_16_9, port_9_16_modsel, 0, 8) +FLD_RAW_RO_DEF( zqsfp28_irq_8_1_status, port_1_8_irq_status, 0, 8) +FLD_RAW_RO_DEF( zqsfp28_irq_16_9_status, port_9_16_irq_status,0, 8) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_8_1_status, port_1_8_irq_msk, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_16_9_status,port_9_16_irq_msk, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_lpmode_8_1, port_1_8_lpmode, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_lpmode_16_9, port_9_16_lpmode, 0, 8) + +FLD_RAW_RO_DEF( fan_tray_status, fan_tray1_6_present, 0, 8) +FLD_RAW_RO_DEF( psu_en_status, psu_en_status_fld, 0, 8) +#endif /* __MASTER_CPLD_REG */ diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/master_cpld_sysfs.h b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/master_cpld_sysfs.h new file mode 100644 index 000000000000..e851ca5fb487 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/master_cpld_sysfs.h @@ -0,0 +1,226 @@ +#ifndef __MASTER_CPLD_SYSFS +#define __MASTER_CPLD_SYSFS + +/* generic CPLD sysfs file definition macros */ +#define SYSFS_RAW_RO_ATTR_DEF(field) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO, master_cpld_##field##_raw_read, NULL); + +#define SYSFS_RAW_RW_ATTR_DEF(field) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO | S_IWUGO, master_cpld_##field##_raw_read, master_cpld_##field##_raw_write); + +#define SYSFS_MISC_RO_ATTR_DEF(field, _read) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO, _read, NULL); + +#define SYSFS_MISC_RW_ATTR_DEF(field, _read, _write) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO | S_IWUGO, _read, _write); + +#define SYSFS_ATTR_PTR(field) \ +&field.attr + +/* declare master CPLD file system */ +SYSFS_RAW_RO_ATTR_DEF(mjr_rev) +SYSFS_RAW_RO_ATTR_DEF(mnr_rev) + +SYSFS_RAW_RW_ATTR_DEF(scrtch_reg) + +SYSFS_RAW_RO_ATTR_DEF(brd_rev) +SYSFS_RAW_RO_ATTR_DEF(brd_type) + +SYSFS_RAW_RW_ATTR_DEF(mb_rst) +SYSFS_RAW_RW_ATTR_DEF(npu_rst) +SYSFS_RAW_RW_ATTR_DEF(mgmt_phy_rst) + +SYSFS_RAW_RW_ATTR_DEF(mb_eeprom_wp) +SYSFS_RAW_RW_ATTR_DEF(cpld_spi_wp) +SYSFS_RAW_RW_ATTR_DEF(fan_eeprom_wp) + +SYSFS_RAW_RW_ATTR_DEF(ps2_int_msk) +SYSFS_RAW_RW_ATTR_DEF(ps1_int_msk) +SYSFS_RAW_RW_ATTR_DEF(usb_fault_msk) +SYSFS_RAW_RW_ATTR_DEF(pcie_int_msk) +SYSFS_RAW_RW_ATTR_DEF(fan_alert_int_msk) +SYSFS_RAW_RO_ATTR_DEF(usb_fault) +SYSFS_RAW_RO_ATTR_DEF(pcie_int) +SYSFS_RAW_RO_ATTR_DEF(fan_alert_int) + +SYSFS_RAW_RW_ATTR_DEF(system_led_fld) +SYSFS_RAW_RW_ATTR_DEF(power_led) +SYSFS_RAW_RW_ATTR_DEF(fan_led) +SYSFS_RAW_RW_ATTR_DEF(locate_led) + +SYSFS_RAW_RW_ATTR_DEF(led_test) +SYSFS_RAW_RW_ATTR_DEF(fan_tray3_led) +SYSFS_RAW_RW_ATTR_DEF(fan_tray2_led) +SYSFS_RAW_RW_ATTR_DEF(fan_tray1_led) + +SYSFS_RAW_RW_ATTR_DEF(fan_tray6_led) +SYSFS_RAW_RW_ATTR_DEF(fan_tray5_led) +SYSFS_RAW_RW_ATTR_DEF(fan_tray4_led) + +SYSFS_RAW_RO_ATTR_DEF(fan_tray6_present) +SYSFS_RAW_RO_ATTR_DEF(fan_tray5_present) +SYSFS_RAW_RO_ATTR_DEF(fan_tray4_present) +SYSFS_RAW_RO_ATTR_DEF(fan_tray3_present) +SYSFS_RAW_RO_ATTR_DEF(fan_tray2_present) +SYSFS_RAW_RO_ATTR_DEF(fan_tray1_present) + +SYSFS_RAW_RO_ATTR_DEF(fan_type6) +SYSFS_RAW_RO_ATTR_DEF(fan_type5) +SYSFS_RAW_RO_ATTR_DEF(fan_type4) +SYSFS_RAW_RO_ATTR_DEF(fan_type3) +SYSFS_RAW_RO_ATTR_DEF(fan_type2) +SYSFS_RAW_RO_ATTR_DEF(fan_type1) + +SYSFS_RAW_RO_ATTR_DEF(ps1_ps) +SYSFS_RAW_RO_ATTR_DEF(ps1_pg) +SYSFS_RAW_RO_ATTR_DEF(ps1_int) +SYSFS_RAW_RW_ATTR_DEF(ps1_on) +SYSFS_RAW_RO_ATTR_DEF(ps2_ps) +SYSFS_RAW_RO_ATTR_DEF(ps2_pg) +SYSFS_RAW_RO_ATTR_DEF(ps2_int) +SYSFS_RAW_RW_ATTR_DEF(ps2_on) + +SYSFS_RAW_RW_ATTR_DEF(usb1_vbus_en) +SYSFS_RAW_RO_ATTR_DEF(v5p0_en) +SYSFS_RAW_RO_ATTR_DEF(v3p3_en) +SYSFS_RAW_RO_ATTR_DEF(vcc_1v8_en) +SYSFS_RAW_RO_ATTR_DEF(mac_avs1v_en) +SYSFS_RAW_RO_ATTR_DEF(mac1v_en) +SYSFS_RAW_RO_ATTR_DEF(vcc_1v25_en) + +SYSFS_RAW_RO_ATTR_DEF(vcc_3p3_cpld) +SYSFS_RAW_RO_ATTR_DEF(vcc5v_pg) +SYSFS_RAW_RO_ATTR_DEF(vcc3v3_pg) +SYSFS_RAW_RO_ATTR_DEF(vcc_1v8_pg) +SYSFS_RAW_RO_ATTR_DEF(mac_avs1v_pg) +SYSFS_RAW_RO_ATTR_DEF(mac1v_pg) +SYSFS_RAW_RO_ATTR_DEF(vcc_1v25_pg) + +SYSFS_RAW_RO_ATTR_DEF(port8_present) +SYSFS_RAW_RO_ATTR_DEF(port7_present) +SYSFS_RAW_RO_ATTR_DEF(port6_present) +SYSFS_RAW_RO_ATTR_DEF(port5_present) +SYSFS_RAW_RO_ATTR_DEF(port4_present) +SYSFS_RAW_RO_ATTR_DEF(port3_present) +SYSFS_RAW_RO_ATTR_DEF(port2_present) +SYSFS_RAW_RO_ATTR_DEF(port1_present) + +SYSFS_RAW_RO_ATTR_DEF(port16_present) +SYSFS_RAW_RO_ATTR_DEF(port15_present) +SYSFS_RAW_RO_ATTR_DEF(port14_present) +SYSFS_RAW_RO_ATTR_DEF(port13_present) +SYSFS_RAW_RO_ATTR_DEF(port12_present) +SYSFS_RAW_RO_ATTR_DEF(port11_present) +SYSFS_RAW_RO_ATTR_DEF(port10_present) +SYSFS_RAW_RO_ATTR_DEF(port9_present) + +SYSFS_RAW_RW_ATTR_DEF(port8_rst) +SYSFS_RAW_RW_ATTR_DEF(port7_rst) +SYSFS_RAW_RW_ATTR_DEF(port6_rst) +SYSFS_RAW_RW_ATTR_DEF(port5_rst) +SYSFS_RAW_RW_ATTR_DEF(port4_rst) +SYSFS_RAW_RW_ATTR_DEF(port3_rst) +SYSFS_RAW_RW_ATTR_DEF(port2_rst) +SYSFS_RAW_RW_ATTR_DEF(port1_rst) + +SYSFS_RAW_RW_ATTR_DEF(port16_rst) +SYSFS_RAW_RW_ATTR_DEF(port15_rst) +SYSFS_RAW_RW_ATTR_DEF(port14_rst) +SYSFS_RAW_RW_ATTR_DEF(port13_rst) +SYSFS_RAW_RW_ATTR_DEF(port12_rst) +SYSFS_RAW_RW_ATTR_DEF(port11_rst) +SYSFS_RAW_RW_ATTR_DEF(port10_rst) +SYSFS_RAW_RW_ATTR_DEF(port9_rst) + +SYSFS_RAW_RW_ATTR_DEF(port8_modsel) +SYSFS_RAW_RW_ATTR_DEF(port7_modsel) +SYSFS_RAW_RW_ATTR_DEF(port6_modsel) +SYSFS_RAW_RW_ATTR_DEF(port5_modsel) +SYSFS_RAW_RW_ATTR_DEF(port4_modsel) +SYSFS_RAW_RW_ATTR_DEF(port3_modsel) +SYSFS_RAW_RW_ATTR_DEF(port2_modsel) +SYSFS_RAW_RW_ATTR_DEF(port1_modsel) + +SYSFS_RAW_RW_ATTR_DEF(port16_modsel) +SYSFS_RAW_RW_ATTR_DEF(port15_modsel) +SYSFS_RAW_RW_ATTR_DEF(port14_modsel) +SYSFS_RAW_RW_ATTR_DEF(port13_modsel) +SYSFS_RAW_RW_ATTR_DEF(port12_modsel) +SYSFS_RAW_RW_ATTR_DEF(port11_modsel) +SYSFS_RAW_RW_ATTR_DEF(port10_modsel) +SYSFS_RAW_RW_ATTR_DEF(port9_modsel) + +SYSFS_RAW_RW_ATTR_DEF(port8_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port7_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port6_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port5_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port4_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port3_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port2_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port1_lpmode) + +SYSFS_RAW_RW_ATTR_DEF(port16_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port15_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port14_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port13_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port12_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port11_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port10_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port9_lpmode) + +SYSFS_RAW_RO_ATTR_DEF(port8_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port7_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port6_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port5_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port4_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port3_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port2_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port1_irq_status) + +SYSFS_RAW_RO_ATTR_DEF(port16_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port15_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port14_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port13_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port12_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port11_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port10_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port9_irq_status) + +SYSFS_RAW_RW_ATTR_DEF(port8_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port7_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port6_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port5_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port4_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port3_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port2_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port1_irq_msk) + +SYSFS_RAW_RW_ATTR_DEF(port16_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port15_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port14_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port13_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port12_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port11_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port10_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port9_irq_msk) + +SYSFS_RAW_RO_ATTR_DEF(port_1_8_present) +SYSFS_RAW_RO_ATTR_DEF(port_9_16_present) +SYSFS_RAW_RW_ATTR_DEF(port_1_8_rst) +SYSFS_RAW_RW_ATTR_DEF(port_9_16_rst) +SYSFS_RAW_RW_ATTR_DEF(port_1_8_modsel) +SYSFS_RAW_RW_ATTR_DEF(port_9_16_modsel) +SYSFS_RAW_RO_ATTR_DEF(port_1_8_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port_9_16_irq_status) +SYSFS_RAW_RW_ATTR_DEF(port_1_8_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port_9_16_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port_1_8_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port_9_16_lpmode) + +SYSFS_RAW_RO_ATTR_DEF(fan_tray1_6_present) +SYSFS_RAW_RO_ATTR_DEF(psu_en_status_fld) +#endif /* __MASTER_CPLD_SYSFS */ diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_cb_i2c.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_cb_i2c.c new file mode 100644 index 000000000000..11fffe251785 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_cb_i2c.c @@ -0,0 +1,163 @@ +#include +#include +#include +#include "bms_i2c.h" + +#define BMS_CB_I2C_CLIENT_NUM 5 +#define BMS_CB_ADAPTER_BASE 0 + +static struct i2c_client *bms_cb_clients[BMS_CB_I2C_CLIENT_NUM] = {NULL}; +static int bms_cb_client_index = 0; + +static int __init __find_i2c_adap(struct device *dev, void *data) +{ + const char *name = data; + static const char *prefix = "i2c-"; + struct i2c_adapter *adapter; + + if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0) + { + return 0; + } + adapter = to_i2c_adapter(dev); + + return (strncmp(adapter->name, name, strlen(name)) == 0); +} + +static int __init find_i2c_adapter_num(enum i2c_adapter_type type) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + const char *name = bms_i2c_adapter_names[type]; + + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", + __func__, name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + + return adapter->nr; +} + + +static __init struct i2c_client *bms_cb_setup_spd( + struct i2c_adapter *adap, int addr) +{ + struct i2c_board_info info_spd = { + I2C_BOARD_INFO("spd", addr), + }; + + return i2c_new_device(adap, &info_spd); +} + + +static __init struct i2c_client *bms_cb_setup_eeprom_24c02( + struct i2c_adapter *adap, int addr) +{ + struct i2c_board_info info_spd = { + I2C_BOARD_INFO("24c02", addr), + }; + + return i2c_new_device(adap, &info_spd); +} + +static __init struct i2c_client *bms_cb_setup_tmp75( + struct i2c_adapter *adap, int addr) +{ + struct i2c_board_info info_spd = { + I2C_BOARD_INFO("tmp75", addr), + }; + + return i2c_new_device(adap, &info_spd); +} + +static __init struct i2c_client *bms_cb_setup_system_cpld(struct i2c_adapter *adap) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("system_cpld", 0x31), + }; + + return i2c_new_device(adap, &info); +} + +static int __init bms_cb_setup_devices_i801(void) +{ + struct i2c_adapter *adap; + int adap_num = find_i2c_adapter_num(I2C_ADAPTER_I801); + + if (adap_num < 0) + return adap_num; + + adap = i2c_get_adapter(adap_num); + if (!adap) { + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + goto exit; + } + + bms_cb_clients[bms_cb_client_index++] = bms_cb_setup_spd(adap, 0x50); + bms_cb_clients[bms_cb_client_index++] = bms_cb_setup_spd(adap, 0x52); + bms_cb_clients[bms_cb_client_index++] = bms_cb_setup_tmp75(adap, 0x4e); + +exit: + return 0; +} + +static int __init bms_cb_setup_devices_ismt(void) +{ + struct i2c_adapter *adap; + int adap_num = find_i2c_adapter_num(I2C_ADAPTER_ISMT); + + if (adap_num < 0) + return adap_num; + + adap = i2c_get_adapter(adap_num); + if (!adap) { + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + return 0; + } + + bms_cb_clients[bms_cb_client_index++] = bms_cb_setup_system_cpld(adap); + bms_cb_clients[bms_cb_client_index++] = bms_cb_setup_eeprom_24c02(adap, 0x56); + return 0; +} + +static int __init bms_cb_i2c_init(void) +{ + /* Initial bms_cb_slients array. */ + memset(bms_cb_clients, 0x0, BMS_CB_I2C_CLIENT_NUM); + + bms_cb_setup_devices_i801(); + mdelay(200); + bms_cb_setup_devices_ismt(); + + return 0; +} + + +static void __exit bms_cb_i2c_exit(void){ + int i; + + for (i=(bms_cb_client_index-1); i>=0; i--) { + if (bms_cb_clients[i]) { + i2c_unregister_device(bms_cb_clients[i]); + bms_cb_clients[i] = NULL; + } + } + + bms_cb_client_index = 0; + +} + + +module_init(bms_cb_i2c_init); +module_exit(bms_cb_i2c_exit); + + +MODULE_DESCRIPTION("mitac_ly1200_32x_cb_i2c driver"); +MODULE_AUTHOR("Eddy Weng "); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fb_i2c.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fb_i2c.c new file mode 100644 index 000000000000..d228bc481279 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fb_i2c.c @@ -0,0 +1,153 @@ +#include +#include +#include "bms_i2c.h" + +#define BMS_FB_I2C_CLIENT_NUM 3 + + +static struct i2c_client *bms_fb_clients[BMS_FB_I2C_CLIENT_NUM] = {NULL}; +static int bms_fb_client_index = 0; + +static int __init __find_i2c_adap(struct device *dev, void *data) +{ + const char *name = data; + static const char *prefix = "i2c-"; + struct i2c_adapter *adapter; + + if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0) + { + return 0; + } + adapter = to_i2c_adapter(dev); + + return (strncmp(adapter->name, name, strlen(name)) == 0); +} + +static int __init find_i2c_adapter_num(enum i2c_adapter_type type) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + const char *name = bms_i2c_adapter_names[type]; + + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", + __func__, name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + + return adapter->nr; +} + +static int __init find_i2c_mux_adapter_num(int parent_num, int num) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + char name[48]; + + snprintf(name, sizeof(name), "i2c-%d-mux (chan_id %d)", + parent_num, num); + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", + __func__, name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + + return adapter->nr; +} + +static __init struct i2c_client *bms_fb_setup_tmp75( + struct i2c_adapter *adap, int addr) +{ + struct i2c_board_info info_spd = { + I2C_BOARD_INFO("tmp75", addr), + }; + + return i2c_new_device(adap, &info_spd); +} + +static __init struct i2c_client *bms_fb_setup_max31790( + struct i2c_adapter *adap, int addr) +{ + struct i2c_board_info info_spd = { + I2C_BOARD_INFO("max31790", addr), + }; + + return i2c_new_device(adap, &info_spd); +} + +static int __init bms_fb_setup_devices(void) +{ + struct i2c_adapter *adap; + int adap_num; + int parent_num; + + parent_num = find_i2c_adapter_num(I2C_ADAPTER_ISMT); + if (parent_num < 0) + return parent_num; + + /* Mux chan1 steup */ + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN1); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_fb_clients[bms_fb_client_index++] = bms_fb_setup_max31790(adap, 0x20); + bms_fb_clients[bms_fb_client_index++] = bms_fb_setup_max31790(adap, 0x23); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN1); + } + + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN2); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_fb_clients[bms_fb_client_index++] = bms_fb_setup_tmp75(adap, 0x4d); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN2); + } + + return 0; +} + +static int __init bms_fb_i2c_init(void) +{ + bms_fb_setup_devices(); + + return 0; +} + +static void __exit bms_fb_i2c_exit(void){ + int i; + + for (i=(bms_fb_client_index-1); i>=0; i--) { + if (bms_fb_clients[i]) { + i2c_unregister_device(bms_fb_clients[i]); + bms_fb_clients[i] = NULL; + } + } + + bms_fb_client_index = 0; + +} + +module_init(bms_fb_i2c_init); +module_exit(bms_fb_i2c_exit); + + +MODULE_DESCRIPTION("mitac_ly1200_32x_fb_i2c driver"); +MODULE_AUTHOR("Eddy Weng "); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fb_module_i2c.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fb_module_i2c.c new file mode 100644 index 000000000000..174dba197217 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fb_module_i2c.c @@ -0,0 +1,138 @@ +#include +#include +#include "bms_i2c.h" + +#define BMS_FB_MODULE_I2C_CLIENT_NUM 6 + +static struct i2c_client *bms_fb_module_clients[BMS_FB_MODULE_I2C_CLIENT_NUM] = {NULL}; +static int bms_fb_module_client_index = 0; + +static int __init __find_i2c_adap(struct device *dev, void *data) +{ + const char *name = data; + static const char *prefix = "i2c-"; + struct i2c_adapter *adapter; + + if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0) + { + return 0; + } + adapter = to_i2c_adapter(dev); + + return (strncmp(adapter->name, name, strlen(name)) == 0); +} + +static int __init find_i2c_adapter_num(enum i2c_adapter_type type) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + const char *name = bms_i2c_adapter_names[type]; + + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", + __func__, name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + + return adapter->nr; +} + +static int __init find_i2c_mux_adapter_num(int parent_num, int num) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + char name[48]; + + snprintf(name, sizeof(name), "i2c-%d-mux (chan_id %d)", + parent_num, num); + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", + __func__, name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + + return adapter->nr; +} + + +static __init struct i2c_client *bms_fb_module_setup_eeprom_24c02( + struct i2c_adapter *adap, int addr) +{ + struct i2c_board_info info_spd = { + I2C_BOARD_INFO("24c02", addr), + }; + + return i2c_new_device(adap, &info_spd); +} + +static int __init bms_fb_module_setup_devices(void) +{ + struct i2c_adapter *adap; + int adap_num; + int parent_num; + + parent_num = find_i2c_adapter_num(I2C_ADAPTER_ISMT); + if (parent_num < 0) + return parent_num; + + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN1); + if (adap_num < 0) + return adap_num; + + adap = i2c_get_adapter(adap_num); + if (!adap) { + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + goto exit; + } + + bms_fb_module_clients[bms_fb_module_client_index++] = bms_fb_module_setup_eeprom_24c02(adap, 0x50); + bms_fb_module_clients[bms_fb_module_client_index++] = bms_fb_module_setup_eeprom_24c02(adap, 0x51); + bms_fb_module_clients[bms_fb_module_client_index++] = bms_fb_module_setup_eeprom_24c02(adap, 0x52); + bms_fb_module_clients[bms_fb_module_client_index++] = bms_fb_module_setup_eeprom_24c02(adap, 0x53); + bms_fb_module_clients[bms_fb_module_client_index++] = bms_fb_module_setup_eeprom_24c02(adap, 0x54); + bms_fb_module_clients[bms_fb_module_client_index++] = bms_fb_module_setup_eeprom_24c02(adap, 0x55); + +exit: + return 0; +} + +static int __init bms_fb_module_i2c_init(void) +{ + /* Initial bms_sb_slients array. */ + memset(bms_fb_module_clients, 0x0, BMS_FB_MODULE_I2C_CLIENT_NUM); + + bms_fb_module_setup_devices(); + + return 0; +} + +static void __exit bms_fb_module_i2c_exit(void){ + int i; + + for (i=(bms_fb_module_client_index-1); i>=0; i--) { + if (bms_fb_module_clients[i]) { + i2c_unregister_device(bms_fb_module_clients[i]); + bms_fb_module_clients[i] = NULL; + } + } + + bms_fb_module_client_index = 0; + +} + +module_init(bms_fb_module_i2c_init); +module_exit(bms_fb_module_i2c_exit); + + +MODULE_DESCRIPTION("mitac_ly1200_32x_fb_module_i2c driver"); +MODULE_AUTHOR("Eddy Weng "); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fse000.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fse000.c new file mode 100644 index 000000000000..362821706857 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_fse000.c @@ -0,0 +1,1787 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "pmbus.h" +#include + +/* + * Number of additional attribute pointers to allocate + * with each call to krealloc + */ +#define PMBUS_ATTR_ALLOC_SIZE 32 + +/* + * Index into status register array, per status register group + */ +#define PB_STATUS_BASE 0 +#define PB_STATUS_VOUT_BASE (PB_STATUS_BASE + PMBUS_PAGES) +#define PB_STATUS_IOUT_BASE (PB_STATUS_VOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN_BASE (PB_STATUS_IOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN34_BASE (PB_STATUS_FAN_BASE + PMBUS_PAGES) +#define PB_STATUS_TEMP_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES) +#define PB_STATUS_INPUT_BASE (PB_STATUS_TEMP_BASE + PMBUS_PAGES) +#define PB_STATUS_VMON_BASE (PB_STATUS_INPUT_BASE + 1) + +#define PB_NUM_STATUS_REG (PB_STATUS_VMON_BASE + 1) + +#define PMBUS_NAME_SIZE 24 +#define PMBUS_BLOCK_READ_SIZE 32 + +struct pmbus_sensor { + struct pmbus_sensor *next; + char name[PMBUS_NAME_SIZE]; /* sysfs sensor name */ + struct device_attribute attribute; + u8 page; /* page number */ + u16 reg; /* register */ + enum pmbus_sensor_classes class; /* sensor class */ + bool update; /* runtime sensor update needed */ + int data; /* Sensor data. + Negative if there was a read error */ +}; +#define to_pmbus_sensor(_attr) \ + container_of(_attr, struct pmbus_sensor, attribute) + +struct pmbus_st { + char name[PMBUS_NAME_SIZE]; /* sysfs boolean name */ + struct sensor_device_attribute attribute; + u16 base; +}; +#define to_pmbus_status(_attr) \ + container_of(_attr, struct pmbus_st, attribute) + +struct pmbus_mfr { + struct pmbus_mfr *next; + char name[PMBUS_NAME_SIZE]; /* sysfs sensor name */ + struct device_attribute attribute; + u8 page; /* page number */ + u16 reg; /* register */ + int data; /* Sensor data. + Negative if there was a read error */ + char data_buf[PMBUS_BLOCK_READ_SIZE]; +}; +#define to_pmbus_mfr(_attr) \ + container_of(_attr, struct pmbus_mfr, attribute) + +struct pmbus_boolean { + char name[PMBUS_NAME_SIZE]; /* sysfs boolean name */ + struct sensor_device_attribute attribute; + struct pmbus_sensor *s1; + struct pmbus_sensor *s2; +}; +#define to_pmbus_boolean(_attr) \ + container_of(_attr, struct pmbus_boolean, attribute) + +struct pmbus_label { + char name[PMBUS_NAME_SIZE]; /* sysfs label name */ + struct device_attribute attribute; + char label[PMBUS_NAME_SIZE]; /* label */ +}; +#define to_pmbus_label(_attr) \ + container_of(_attr, struct pmbus_label, attribute) + +struct pmbus_data { + struct device *dev; + struct device *hwmon_dev; + + u32 flags; /* from platform data */ + + int exponent[PMBUS_PAGES]; + /* linear mode: exponent for output voltages */ + + const struct pmbus_driver_info *info; + + int max_attributes; + int num_attributes; + struct attribute_group group; + const struct attribute_group *groups[2]; + + struct pmbus_sensor *sensors; + struct pmbus_mfr *mfr; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* + * A single status register covers multiple attributes, + * so we keep them all together. + */ + u8 status[PB_NUM_STATUS_REG]; + u8 status_register; + + u8 currpage; +}; + +void pmbus_clear_cache(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + + data->valid = false; +} + +int pmbus_set_page(struct i2c_client *client, u8 page) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int rv = 0; + int newpage; + + if (page != data->currpage) { + rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE); + if (newpage != page) + rv = -EIO; + else + data->currpage = page; + } + return rv; +} + +int pmbus_write_byte(struct i2c_client *client, int page, u8 value) +{ + int rv; + + if (page >= 0) { + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + } + + return i2c_smbus_write_byte(client, value); +} + +/* + * _pmbus_write_byte() is similar to pmbus_write_byte(), but checks if + * a device specific mapping function exists and calls it if necessary. + */ +static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + int status; + + if (info->write_byte) { + status = info->write_byte(client, page, value); + if (status != -ENODATA) + return status; + } + return pmbus_write_byte(client, page, value); +} + +int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_write_word_data(client, reg, word); +} + +/* + * _pmbus_write_word_data() is similar to pmbus_write_word_data(), but checks if + * a device specific mapping function exists and calls it if necessary. + */ +static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + int status; + + if (info->write_word_data) { + status = info->write_word_data(client, page, reg, word); + if (status != -ENODATA) + return status; + } + if (reg >= PMBUS_VIRT_BASE) + return -ENXIO; + return pmbus_write_word_data(client, page, reg, word); +} + +int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + + return i2c_smbus_read_word_data(client, reg); +} + +int pmbus_read_block_data(struct i2c_client *client, u8 reg, u8* value) +{ + return i2c_smbus_read_block_data(client, reg, value); +} + +static int _pmbus_read_block_data(struct i2c_client *client, int page, int reg, u8* value) +{ + int rv; + + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + return pmbus_read_block_data(client, reg, value); +} + +/* + * _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if + * a device specific mapping function exists and calls it if necessary. + */ +static int _pmbus_read_word_data(struct i2c_client *client, int page, int reg) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + int status; + + if (info->read_word_data) { + status = info->read_word_data(client, page, reg); + if (status != -ENODATA) + return status; + } + if (reg >= PMBUS_VIRT_BASE) + return -ENXIO; + return pmbus_read_word_data(client, page, reg); +} + +int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg) +{ + int rv; + + if (page >= 0) { + rv = pmbus_set_page(client, page); + if (rv < 0) + return rv; + } + + return i2c_smbus_read_byte_data(client, reg); +} + +/* + * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if + * a device specific mapping function exists and calls it if necessary. + */ +static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + int status; + + if (info->read_byte_data) { + status = info->read_byte_data(client, page, reg); + if (status != -ENODATA) + return status; + } + return pmbus_read_byte_data(client, page, reg); +} + +static void pmbus_clear_fault_page(struct i2c_client *client, int page) +{ + _pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS); +} + +void pmbus_clear_faults(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int i; + + for (i = 0; i < data->info->pages; i++) + pmbus_clear_fault_page(client, i); +} + +static int pmbus_check_status_cml(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int status, status2; + + status = _pmbus_read_byte_data(client, -1, data->status_register); + if (status < 0 || (status & PB_STATUS_CML)) { + status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML); + if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND)) + return -EIO; + } + return 0; +} + +static bool pmbus_check_register(struct i2c_client *client, + int (*func)(struct i2c_client *client, + int page, int reg), + int page, int reg) +{ + int rv; + struct pmbus_data *data = i2c_get_clientdata(client); + + rv = func(client, page, reg); + if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK)) + rv = pmbus_check_status_cml(client); + pmbus_clear_fault_page(client, -1); + return rv >= 0; +} + +bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg) +{ + return pmbus_check_register(client, _pmbus_read_byte_data, page, reg); +} + +bool pmbus_check_word_register(struct i2c_client *client, int page, int reg) +{ + return pmbus_check_register(client, _pmbus_read_word_data, page, reg); +} + +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + + return data->info; +} + +static struct _pmbus_status { + u32 func; + u16 base; + u16 reg; +} pmbus_status[] = { + { PMBUS_HAVE_STATUS_VOUT, PB_STATUS_VOUT_BASE, PMBUS_STATUS_VOUT }, + { PMBUS_HAVE_STATUS_IOUT, PB_STATUS_IOUT_BASE, PMBUS_STATUS_IOUT }, + { PMBUS_HAVE_STATUS_TEMP, PB_STATUS_TEMP_BASE, + PMBUS_STATUS_TEMPERATURE }, + { PMBUS_HAVE_STATUS_FAN12, PB_STATUS_FAN_BASE, PMBUS_STATUS_FAN_12 }, + { PMBUS_HAVE_STATUS_FAN34, PB_STATUS_FAN34_BASE, PMBUS_STATUS_FAN_34 }, +}; + +static struct _pmbus_status_reg { + char name[PMBUS_NAME_SIZE]; + u16 base; + u8 offset; +} pmbus_status_reg[] = { + { "vout_ov_fault", PB_STATUS_VOUT_BASE, PB_VOLTAGE_UV_FAULT}, + { "vout_uv_fault", PB_STATUS_VOUT_BASE, PB_VOLTAGE_OV_FAULT}, + { "ot_fault", PB_STATUS_TEMP_BASE, PB_TEMP_OT_FAULT}, + { "ot_warning", PB_STATUS_TEMP_BASE, PB_TEMP_OT_WARNING}, + { "vin_uv_warning", PB_STATUS_INPUT_BASE, PB_VOLTAGE_UV_WARNING}, + { "vin_uv_fault", PB_STATUS_INPUT_BASE, PB_VOLTAGE_UV_FAULT}, +}; + +static struct _pmbus_mfr_reg { + char name[PMBUS_NAME_SIZE]; + u16 reg; +} pmbus_mfr_reg[] = { + { "mfr_id", PMBUS_MFR_ID}, + { "mfr_model", PMBUS_MFR_MODEL}, + { "mfr_revision", PMBUS_MFR_REVISION}, + { "mfr_location", PMBUS_MFR_LOCATION}, + { "mfr_date", PMBUS_MFR_DATE}, + { "mfr_serial", PMBUS_MFR_SERIAL}, +}; + +static struct pmbus_data *pmbus_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct pmbus_data *data = i2c_get_clientdata(client); + const struct pmbus_driver_info *info = data->info; + struct pmbus_sensor *sensor; + struct pmbus_mfr *mfr; + + mutex_lock(&data->update_lock); + if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { + int i, j; + + for (i = 0; i < info->pages; i++) { + data->status[PB_STATUS_BASE + i] + = _pmbus_read_byte_data(client, i, + data->status_register); + for (j = 0; j < ARRAY_SIZE(pmbus_status); j++) { + struct _pmbus_status *s = &pmbus_status[j]; + + if (!(info->func[i] & s->func)) + continue; + data->status[s->base + i] + = _pmbus_read_byte_data(client, i, + s->reg); + } + } + + if (info->func[0] & PMBUS_HAVE_STATUS_INPUT) + data->status[PB_STATUS_INPUT_BASE] + = _pmbus_read_byte_data(client, 0, + PMBUS_STATUS_INPUT); + + if (info->func[0] & PMBUS_HAVE_STATUS_VMON) + data->status[PB_STATUS_VMON_BASE] + = _pmbus_read_byte_data(client, 0, + PMBUS_VIRT_STATUS_VMON); + + for (sensor = data->sensors; sensor; sensor = sensor->next) { + if (!data->valid || sensor->update) + sensor->data + = _pmbus_read_word_data(client, + sensor->page, + sensor->reg); + } + + /* read mfg data */ + for (mfr = data->mfr; mfr; mfr = mfr->next) { + mfr->data = _pmbus_read_block_data(client, mfr->page, mfr->reg, mfr->data_buf); + } + + pmbus_clear_faults(client); + data->last_updated = jiffies; + data->valid = 1; + } + mutex_unlock(&data->update_lock); + return data; +} + +/* + * Convert linear sensor values to milli- or micro-units + * depending on sensor type. + */ +static long pmbus_reg2data_linear(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + s16 exponent; + s32 mantissa; + long val; + + if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */ + exponent = data->exponent[sensor->page]; + mantissa = (u16) sensor->data; + } else { /* LINEAR11 */ + exponent = ((s16)sensor->data) >> 11; + mantissa = ((s16)((sensor->data & 0x7ff) << 5)) >> 5; + } + + val = mantissa; + + /* scale result to milli-units for all sensors except fans */ + if (sensor->class != PSC_FAN) + val = val * 1000L; + + /* scale result to micro-units for power sensors */ + if (sensor->class == PSC_POWER) + val = val * 1000L; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +/* + * Convert direct sensor values to milli- or micro-units + * depending on sensor type. + */ +static long pmbus_reg2data_direct(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + long val = (s16) sensor->data; + long m, b, R; + + m = data->info->m[sensor->class]; + b = data->info->b[sensor->class]; + R = data->info->R[sensor->class]; + + if (m == 0) + return 0; + + /* X = 1/m * (Y * 10^-R - b) */ + R = -R; + /* scale result to milli-units for everything but fans */ + if (sensor->class != PSC_FAN) { + R += 3; + b *= 1000; + } + + /* scale result to micro-units for power sensors */ + if (sensor->class == PSC_POWER) { + R += 3; + b *= 1000; + } + + while (R > 0) { + val *= 10; + R--; + } + while (R < 0) { + val = DIV_ROUND_CLOSEST(val, 10); + R++; + } + + return (val - b) / m; +} + +/* + * Convert VID sensor values to milli- or micro-units + * depending on sensor type. + * We currently only support VR11. + */ +static long pmbus_reg2data_vid(struct pmbus_data *data, + struct pmbus_sensor *sensor) +{ + long val = sensor->data; + + if (val < 0x02 || val > 0xb2) + return 0; + return DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100); +} + +static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor) +{ + long val; + + switch (data->info->format[sensor->class]) { + case direct: + val = pmbus_reg2data_direct(data, sensor); + break; + case vid: + val = pmbus_reg2data_vid(data, sensor); + break; + case linear: + default: + val = pmbus_reg2data_linear(data, sensor); + break; + } + return val; +} + +#define MAX_MANTISSA (1023 * 1000) +#define MIN_MANTISSA (511 * 1000) + +static u16 pmbus_data2reg_linear(struct pmbus_data *data, + struct pmbus_sensor *sensor, long val) +{ + s16 exponent = 0, mantissa; + bool negative = false; + + /* simple case */ + if (val == 0) + return 0; + + if (sensor->class == PSC_VOLTAGE_OUT) { + /* LINEAR16 does not support negative voltages */ + if (val < 0) + return 0; + + /* + * For a static exponents, we don't have a choice + * but to adjust the value to it. + */ + if (data->exponent[sensor->page] < 0) + val <<= -data->exponent[sensor->page]; + else + val >>= data->exponent[sensor->page]; + val = DIV_ROUND_CLOSEST(val, 1000); + return val & 0xffff; + } + + if (val < 0) { + negative = true; + val = -val; + } + + /* Power is in uW. Convert to mW before converting. */ + if (sensor->class == PSC_POWER) + val = DIV_ROUND_CLOSEST(val, 1000L); + + /* + * For simplicity, convert fan data to milli-units + * before calculating the exponent. + */ + if (sensor->class == PSC_FAN) + val = val * 1000; + + /* Reduce large mantissa until it fits into 10 bit */ + while (val >= MAX_MANTISSA && exponent < 15) { + exponent++; + val >>= 1; + } + /* Increase small mantissa to improve precision */ + while (val < MIN_MANTISSA && exponent > -15) { + exponent--; + val <<= 1; + } + + /* Convert mantissa from milli-units to units */ + mantissa = DIV_ROUND_CLOSEST(val, 1000); + + /* Ensure that resulting number is within range */ + if (mantissa > 0x3ff) + mantissa = 0x3ff; + + /* restore sign */ + if (negative) + mantissa = -mantissa; + + /* Convert to 5 bit exponent, 11 bit mantissa */ + return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800); +} + +static u16 pmbus_data2reg_direct(struct pmbus_data *data, + struct pmbus_sensor *sensor, long val) +{ + long m, b, R; + + m = data->info->m[sensor->class]; + b = data->info->b[sensor->class]; + R = data->info->R[sensor->class]; + + /* Power is in uW. Adjust R and b. */ + if (sensor->class == PSC_POWER) { + R -= 3; + b *= 1000; + } + + /* Calculate Y = (m * X + b) * 10^R */ + if (sensor->class != PSC_FAN) { + R -= 3; /* Adjust R and b for data in milli-units */ + b *= 1000; + } + val = val * m + b; + + while (R > 0) { + val *= 10; + R--; + } + while (R < 0) { + val = DIV_ROUND_CLOSEST(val, 10); + R++; + } + + return val; +} + +static u16 pmbus_data2reg_vid(struct pmbus_data *data, + struct pmbus_sensor *sensor, long val) +{ + val = clamp_val(val, 500, 1600); + + return 2 + DIV_ROUND_CLOSEST((1600 - val) * 100, 625); +} + +static u16 pmbus_data2reg(struct pmbus_data *data, + struct pmbus_sensor *sensor, long val) +{ + u16 regval; + + switch (data->info->format[sensor->class]) { + case direct: + regval = pmbus_data2reg_direct(data, sensor, val); + break; + case vid: + regval = pmbus_data2reg_vid(data, sensor, val); + break; + case linear: + default: + regval = pmbus_data2reg_linear(data, sensor, val); + break; + } + return regval; +} + +/* + * Return boolean calculated from converted data. + * defines a status register index and mask. + * The mask is in the lower 8 bits, the register index is in bits 8..23. + * + * The associated pmbus_boolean structure contains optional pointers to two + * sensor attributes. If specified, those attributes are compared against each + * other to determine if a limit has been exceeded. + * + * If the sensor attribute pointers are NULL, the function returns true if + * (status[reg] & mask) is true. + * + * If sensor attribute pointers are provided, a comparison against a specified + * limit has to be performed to determine the boolean result. + * In this case, the function returns true if v1 >= v2 (where v1 and v2 are + * sensor values referenced by sensor attribute pointers s1 and s2). + * + * To determine if an object exceeds upper limits, specify = . + * To determine if an object exceeds lower limits, specify = . + * + * If a negative value is stored in any of the referenced registers, this value + * reflects an error code which will be returned. + */ +static int pmbus_get_boolean(struct pmbus_data *data, struct pmbus_boolean *b, + int index) +{ + struct pmbus_sensor *s1 = b->s1; + struct pmbus_sensor *s2 = b->s2; + u16 reg = (index >> 8) & 0xffff; + u8 mask = index & 0xff; + int ret, status; + u8 regval; + + status = data->status[reg]; + if (status < 0) + return status; + + regval = status & mask; + if (!s1 && !s2) { + ret = !!regval; + } else if (!s1 || !s2) { + WARN(1, "Bad boolean descriptor %p: s1=%p, s2=%p\n", b, s1, s2); + return 0; + } else { + long v1, v2; + + if (s1->data < 0) + return s1->data; + if (s2->data < 0) + return s2->data; + + v1 = pmbus_reg2data(data, s1); + v2 = pmbus_reg2data(data, s2); + ret = !!(regval && v1 >= v2); + } + return ret; +} + +static ssize_t pmbus_show_boolean(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct pmbus_boolean *boolean = to_pmbus_boolean(attr); + struct pmbus_data *data = pmbus_update_device(dev); + int val; + + val = pmbus_get_boolean(data, boolean, attr->index); + if (val < 0) + return val; + return snprintf(buf, PAGE_SIZE, "%d\n", val); +} + +static ssize_t pmbus_show_sensor(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct pmbus_data *data = pmbus_update_device(dev); + struct pmbus_sensor *sensor = to_pmbus_sensor(devattr); + + if (sensor->data < 0) + return sensor->data; + + return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor)); +} + +static ssize_t pmbus_show_status(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct pmbus_st *status = to_pmbus_status(attr); + struct pmbus_data *data = pmbus_update_device(dev); + + return snprintf(buf, PAGE_SIZE, "%u\n", !!(data->status[status->base] & attr->index)); +} + +static ssize_t pmbus_show_mfr(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct pmbus_mfr *mfr; + + pmbus_update_device(dev); + mfr = to_pmbus_mfr(devattr); + + if (mfr->data < 0) + return mfr->data; + +#if LINUX_VERSION_CODE <= KERNEL_VERSION(3,16,49) + /* mfr->data[0] is data length, we don't want show data length when show command */ + return snprintf(buf, PAGE_SIZE, "%s\n", &mfr->data_buf[1]); +#else + return snprintf(buf, PAGE_SIZE, "%s\n", &mfr->data_buf); +#endif +} + +static ssize_t pmbus_set_sensor(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev->parent); + struct pmbus_data *data = i2c_get_clientdata(client); + struct pmbus_sensor *sensor = to_pmbus_sensor(devattr); + ssize_t rv = count; + long val = 0; + int ret; + u16 regval; + + if (kstrtol(buf, 10, &val) < 0) + return -EINVAL; + + mutex_lock(&data->update_lock); + regval = pmbus_data2reg(data, sensor, val); + ret = _pmbus_write_word_data(client, sensor->page, sensor->reg, regval); + if (ret < 0) + rv = ret; + else + sensor->data = regval; + mutex_unlock(&data->update_lock); + return rv; +} + +static ssize_t pmbus_show_label(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct pmbus_label *label = to_pmbus_label(da); + + return snprintf(buf, PAGE_SIZE, "%s\n", label->label); +} + +static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr) +{ + if (data->num_attributes >= data->max_attributes - 1) { + int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE; + void *new_attrs = krealloc(data->group.attrs, + new_max_attrs * sizeof(void *), + GFP_KERNEL); + if (!new_attrs) + return -ENOMEM; + data->group.attrs = new_attrs; + data->max_attributes = new_max_attrs; + } + + data->group.attrs[data->num_attributes++] = attr; + data->group.attrs[data->num_attributes] = NULL; + return 0; +} + +static void pmbus_dev_attr_init(struct device_attribute *dev_attr, + const char *name, + umode_t mode, + ssize_t (*show)(struct device *dev, + struct device_attribute *attr, + char *buf), + ssize_t (*store)(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count)) +{ + sysfs_attr_init(&dev_attr->attr); + dev_attr->attr.name = name; + dev_attr->attr.mode = mode; + dev_attr->show = show; + dev_attr->store = store; +} + +static void pmbus_attr_init(struct sensor_device_attribute *a, + const char *name, + umode_t mode, + ssize_t (*show)(struct device *dev, + struct device_attribute *attr, + char *buf), + ssize_t (*store)(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count), + int idx) +{ + pmbus_dev_attr_init(&a->dev_attr, name, mode, show, store); + a->index = idx; +} + +static int pmbus_add_boolean(struct pmbus_data *data, + const char *name, const char *type, int seq, + struct pmbus_sensor *s1, + struct pmbus_sensor *s2, + u16 reg, u8 mask) +{ + struct pmbus_boolean *boolean; + struct sensor_device_attribute *a; + + boolean = devm_kzalloc(data->dev, sizeof(*boolean), GFP_KERNEL); + if (!boolean) + return -ENOMEM; + + a = &boolean->attribute; + + snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s", + name, seq, type); + boolean->s1 = s1; + boolean->s2 = s2; + pmbus_attr_init(a, boolean->name, S_IRUGO, pmbus_show_boolean, NULL, + (reg << 8) | mask); + + return pmbus_add_attribute(data, &a->dev_attr.attr); +} + +static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data, + const char *name, const char *type, + int seq, int page, int reg, + enum pmbus_sensor_classes class, + bool update, bool readonly) +{ + struct pmbus_sensor *sensor; + struct device_attribute *a; + + sensor = devm_kzalloc(data->dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return NULL; + a = &sensor->attribute; + + snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s", + name, seq, type); + sensor->page = page; + sensor->reg = reg; + sensor->class = class; + sensor->update = update; + pmbus_dev_attr_init(a, sensor->name, + readonly ? S_IRUGO : S_IRUGO | S_IWUSR, + pmbus_show_sensor, pmbus_set_sensor); + + if (pmbus_add_attribute(data, &a->attr)) + return NULL; + + sensor->next = data->sensors; + data->sensors = sensor; + + return sensor; +} + +static int pmbus_add_status(struct pmbus_data *data, + const char *name, u16 base, + u8 offset) +{ + struct pmbus_st *status; + struct sensor_device_attribute *a; + + status = devm_kzalloc(data->dev, sizeof(*status), GFP_KERNEL); + if (!status) + return -ENOMEM; + + a = &status->attribute; + + snprintf(status->name, sizeof(status->name), "%s", name); + + status->base = base; + + pmbus_attr_init(a, status->name, S_IRUGO, + pmbus_show_status, NULL, offset); + + return pmbus_add_attribute(data, &a->dev_attr.attr); +} + +static struct pmbus_mfr *pmbus_add_mfr(struct pmbus_data *data, + const char *name, + int page, int reg) +{ + struct pmbus_mfr *mfr; + struct device_attribute *a; + + mfr = devm_kzalloc(data->dev, sizeof(*mfr), GFP_KERNEL); + if (!mfr) + return NULL; + a = &mfr->attribute; + + snprintf(mfr->name, sizeof(mfr->name), "%s", name); + mfr->page = page; + mfr->reg = reg; + pmbus_dev_attr_init(a, mfr->name, S_IRUGO, + pmbus_show_mfr, NULL); + + if (pmbus_add_attribute(data, &a->attr)) + return NULL; + + mfr->next = data->mfr; + data->mfr = mfr; + + return mfr; +} + +static int pmbus_add_label(struct pmbus_data *data, + const char *name, int seq, + const char *lstring, int index) +{ + struct pmbus_label *label; + struct device_attribute *a; + + label = devm_kzalloc(data->dev, sizeof(*label), GFP_KERNEL); + if (!label) + return -ENOMEM; + + a = &label->attribute; + + snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq); + if (!index) + strncpy(label->label, lstring, sizeof(label->label) - 1); + else + snprintf(label->label, sizeof(label->label), "%s%d", lstring, + index); + + pmbus_dev_attr_init(a, label->name, S_IRUGO, pmbus_show_label, NULL); + return pmbus_add_attribute(data, &a->attr); +} + +/* + * Search for attributes. Allocate sensors, booleans, and labels as needed. + */ + +/* + * The pmbus_limit_attr structure describes a single limit attribute + * and its associated alarm attribute. + */ +struct pmbus_limit_attr { + u16 reg; /* Limit register */ + u16 sbit; /* Alarm attribute status bit */ + bool update; /* True if register needs updates */ + bool low; /* True if low limit; for limits with compare + functions only */ + const char *attr; /* Attribute name */ + const char *alarm; /* Alarm attribute name */ +}; + +/* + * The pmbus_sensor_attr structure describes one sensor attribute. This + * description includes a reference to the associated limit attributes. + */ +struct pmbus_sensor_attr { + u16 reg; /* sensor register */ + u8 gbit; /* generic status bit */ + u8 nlimit; /* # of limit registers */ + enum pmbus_sensor_classes class;/* sensor class */ + const char *label; /* sensor label */ + bool paged; /* true if paged sensor */ + bool update; /* true if update needed */ + bool compare; /* true if compare function needed */ + u32 func; /* sensor mask */ + u32 sfunc; /* sensor status mask */ + int sbase; /* status base register */ + const struct pmbus_limit_attr *limit;/* limit registers */ +}; + +/* + * Add a set of limit attributes and, if supported, the associated + * alarm attributes. + * returns 0 if no alarm register found, 1 if an alarm register was found, + * < 0 on errors. + */ +static int pmbus_add_limit_attrs(struct i2c_client *client, + struct pmbus_data *data, + const struct pmbus_driver_info *info, + const char *name, int index, int page, + struct pmbus_sensor *base, + const struct pmbus_sensor_attr *attr) +{ + const struct pmbus_limit_attr *l = attr->limit; + int nlimit = attr->nlimit; + int have_alarm = 0; + int i, ret; + struct pmbus_sensor *curr; + + for (i = 0; i < nlimit; i++) { + if (pmbus_check_word_register(client, page, l->reg)) { + curr = pmbus_add_sensor(data, name, l->attr, index, + page, l->reg, attr->class, + attr->update || l->update, + false); + if (!curr) + return -ENOMEM; + if (l->sbit && (info->func[page] & attr->sfunc)) { + ret = pmbus_add_boolean(data, name, + l->alarm, index, + attr->compare ? l->low ? curr : base + : NULL, + attr->compare ? l->low ? base : curr + : NULL, + attr->sbase + page, l->sbit); + if (ret) + return ret; + have_alarm = 1; + } + } + l++; + } + return have_alarm; +} + +static int pmbus_add_sensor_attrs_one(struct i2c_client *client, + struct pmbus_data *data, + const struct pmbus_driver_info *info, + const char *name, + int index, int page, + const struct pmbus_sensor_attr *attr) +{ + struct pmbus_sensor *base; + int ret; + + if (attr->label) { + ret = pmbus_add_label(data, name, index, attr->label, + attr->paged ? page + 1 : 0); + if (ret) + return ret; + } + base = pmbus_add_sensor(data, name, "input", index, page, attr->reg, + attr->class, true, true); + if (!base) + return -ENOMEM; + if (attr->sfunc) { + ret = pmbus_add_limit_attrs(client, data, info, name, + index, page, base, attr); + if (ret < 0) + return ret; + /* + * Add generic alarm attribute only if there are no individual + * alarm attributes, if there is a global alarm bit, and if + * the generic status register for this page is accessible. + */ + if (!ret && attr->gbit && + pmbus_check_byte_register(client, page, + data->status_register)) { + ret = pmbus_add_boolean(data, name, "alarm", index, + NULL, NULL, + PB_STATUS_BASE + page, + attr->gbit); + if (ret) + return ret; + } + } + return 0; +} + +static int pmbus_add_sensor_attrs(struct i2c_client *client, + struct pmbus_data *data, + const char *name, + const struct pmbus_sensor_attr *attrs, + int nattrs) +{ + const struct pmbus_driver_info *info = data->info; + int index, i; + int ret; + + index = 1; + for (i = 0; i < nattrs; i++) { + int page, pages; + + pages = attrs->paged ? info->pages : 1; + for (page = 0; page < pages; page++) { + if (!(info->func[page] & attrs->func)) + continue; + ret = pmbus_add_sensor_attrs_one(client, data, info, + name, index, page, + attrs); + if (ret) + return ret; + index++; + } + attrs++; + } + return 0; +} + +static const struct pmbus_sensor_attr voltage_attributes[] = { + { + .reg = PMBUS_READ_VOUT, + .class = PSC_VOLTAGE_OUT, + .label = "vout", + .paged = true, + .func = PMBUS_HAVE_VOUT, + .sfunc = PMBUS_HAVE_STATUS_VOUT, + .sbase = PB_STATUS_VOUT_BASE, + .gbit = PB_STATUS_VOUT_OV, + } +}; + +static const struct pmbus_limit_attr iout_limit_attrs[] = { + { + .reg = PMBUS_IOUT_OC_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_IOUT_OC_WARNING, + }, { + .reg = PMBUS_IOUT_OC_FAULT_LIMIT, + .attr = "crit", + .alarm = "crit_alarm", + .sbit = PB_IOUT_OC_FAULT, + } +}; + +static const struct pmbus_sensor_attr current_attributes[] = { + { + .reg = PMBUS_READ_IIN, + .class = PSC_CURRENT_IN, + .label = "iin", + .func = PMBUS_HAVE_IIN, + .sfunc = PMBUS_HAVE_STATUS_INPUT, + .sbase = PB_STATUS_INPUT_BASE, + }, { + .reg = PMBUS_READ_IOUT, + .class = PSC_CURRENT_OUT, + .label = "iout", + .paged = true, + .func = PMBUS_HAVE_IOUT, + .sfunc = PMBUS_HAVE_STATUS_IOUT, + .sbase = PB_STATUS_IOUT_BASE, + .gbit = PB_STATUS_IOUT_OC, + .limit = iout_limit_attrs, + .nlimit = ARRAY_SIZE(iout_limit_attrs), + } +}; + +/* Temperature atributes */ +static const struct pmbus_limit_attr temp_limit_attrs[] = { + { + .reg = PMBUS_OT_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_TEMP_OT_WARNING, + } +}; + +static const struct pmbus_limit_attr temp_limit_attrs2[] = { + { + .reg = PMBUS_OT_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_TEMP_OT_WARNING, + } +}; + +static const struct pmbus_limit_attr temp_limit_attrs3[] = { + { + .reg = PMBUS_OT_WARN_LIMIT, + .attr = "max", + .alarm = "max_alarm", + .sbit = PB_TEMP_OT_WARNING, + } +}; + +static const struct pmbus_sensor_attr temp_attributes[] = { + { + .reg = PMBUS_READ_TEMPERATURE_1, + .class = PSC_TEMPERATURE, + .paged = true, + .update = true, + .compare = true, + .func = PMBUS_HAVE_TEMP, + .sfunc = PMBUS_HAVE_STATUS_TEMP, + .sbase = PB_STATUS_TEMP_BASE, + .gbit = PB_STATUS_TEMPERATURE, + .limit = temp_limit_attrs, + .nlimit = ARRAY_SIZE(temp_limit_attrs), + }, { + .reg = PMBUS_READ_TEMPERATURE_2, + .class = PSC_TEMPERATURE, + .paged = true, + .update = true, + .compare = true, + .func = PMBUS_HAVE_TEMP2, + .sfunc = PMBUS_HAVE_STATUS_TEMP, + .sbase = PB_STATUS_TEMP_BASE, + .gbit = PB_STATUS_TEMPERATURE, + .limit = temp_limit_attrs2, + .nlimit = ARRAY_SIZE(temp_limit_attrs2), + }, { + .reg = PMBUS_READ_TEMPERATURE_3, + .class = PSC_TEMPERATURE, + .paged = true, + .update = true, + .compare = true, + .func = PMBUS_HAVE_TEMP3, + .sfunc = PMBUS_HAVE_STATUS_TEMP, + .sbase = PB_STATUS_TEMP_BASE, + .gbit = PB_STATUS_TEMPERATURE, + .limit = temp_limit_attrs3, + .nlimit = ARRAY_SIZE(temp_limit_attrs3), + } +}; + +static const int pmbus_fan_registers[] = { + PMBUS_READ_FAN_SPEED_1, +}; + +static const int pmbus_fan_config_registers[] = { + PMBUS_FAN_CONFIG_12, +}; + +static const int pmbus_fan_status_registers[] = { + PMBUS_STATUS_FAN_12, +}; + +static const u32 pmbus_fan_flags[] = { + PMBUS_HAVE_FAN12, +}; + +static const u32 pmbus_fan_status_flags[] = { + PMBUS_HAVE_STATUS_FAN12, +}; + +/* Fans */ +static int pmbus_add_fan_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + const struct pmbus_driver_info *info = data->info; + int index = 1; + int page; + int ret; + + for (page = 0; page < info->pages; page++) { + int f; + + for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) { + int regval; + + if (!(info->func[page] & pmbus_fan_flags[f])) + break; + + if (!pmbus_check_word_register(client, page, + pmbus_fan_registers[f])) + break; + + /* + * Skip fan if not installed. + * Each fan configuration register covers multiple fans, + * so we have to do some magic. + */ + regval = _pmbus_read_byte_data(client, page, + pmbus_fan_config_registers[f]); + if (regval < 0 || + (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4))))) + continue; + + if (pmbus_add_sensor(data, "fan", "input", index, + page, pmbus_fan_registers[f], + PSC_FAN, true, true) == NULL) + return -ENOMEM; + + /* + * Each fan status register covers multiple fans, + * so we have to do some magic. + */ + if ((info->func[page] & pmbus_fan_status_flags[f]) && + pmbus_check_byte_register(client, + page, pmbus_fan_status_registers[f])) { + int base; + + if (f > 1) /* fan 3, 4 */ + base = PB_STATUS_FAN34_BASE + page; + else + base = PB_STATUS_FAN_BASE + page; + ret = pmbus_add_boolean(data, "fan", + "alarm", index, NULL, NULL, base, + PB_FAN_FAN1_WARNING >> (f & 1)); + if (ret) + return ret; + ret = pmbus_add_boolean(data, "fan", + "fault", index, NULL, NULL, base, + PB_FAN_FAN1_FAULT >> (f & 1)); + if (ret) + return ret; + } + index++; + } + } + return 0; +} + +/* mfr items */ +static int pmbus_add_mfr_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + int page = 0; + int i; + + for(i = 0; i < ARRAY_SIZE(pmbus_mfr_reg);i++){ + + if (pmbus_add_mfr(data, pmbus_mfr_reg[i].name, page, pmbus_mfr_reg[i].reg) == NULL){ + return -ENOMEM; + } + } + + return 0; +} + +/* status items */ +static int pmbus_add_status_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + int i; + + for(i = 0; i < ARRAY_SIZE(pmbus_status_reg);i++){ + if (pmbus_add_status(data, pmbus_status_reg[i].name, pmbus_status_reg[i].base, pmbus_status_reg[i].offset)){ + return -ENOMEM; + } + } + + return 0; +} + +static int pmbus_find_attributes(struct i2c_client *client, + struct pmbus_data *data) +{ + int ret; + + /* Voltage sensors */ + ret = pmbus_add_sensor_attrs(client, data, "in", voltage_attributes, + ARRAY_SIZE(voltage_attributes)); + if (ret) + return ret; + + /* Current sensors */ + ret = pmbus_add_sensor_attrs(client, data, "curr", current_attributes, + ARRAY_SIZE(current_attributes)); + if (ret) + return ret; + + /* Temperature sensors */ + ret = pmbus_add_sensor_attrs(client, data, "temp", temp_attributes, + ARRAY_SIZE(temp_attributes)); + if (ret) + return ret; + + /* Fans */ + ret = pmbus_add_fan_attributes(client, data); + if (ret) + return ret; + + /* mfr data */ + ret = pmbus_add_mfr_attributes(client, data); + if (ret) + return ret; + + /* status data */ + ret = pmbus_add_status_attributes(client, data); + return ret; +} + +/* + * Identify chip parameters. + * This function is called for all chips. + */ +static int pmbus_identify_common(struct i2c_client *client, + struct pmbus_data *data, int page) +{ + int vout_mode = -1; + + if (pmbus_check_byte_register(client, page, PMBUS_VOUT_MODE)) + vout_mode = _pmbus_read_byte_data(client, page, + PMBUS_VOUT_MODE); + if (vout_mode >= 0 && vout_mode != 0xff) { + /* + * Not all chips support the VOUT_MODE command, + * so a failure to read it is not an error. + */ + switch (vout_mode >> 5) { + case 0: /* linear mode */ + if (data->info->format[PSC_VOLTAGE_OUT] != linear) + return -ENODEV; + + data->exponent[page] = ((s8)(vout_mode << 3)) >> 3; + break; + case 1: /* VID mode */ + if (data->info->format[PSC_VOLTAGE_OUT] != vid) + return -ENODEV; + break; + case 2: /* direct mode */ + if (data->info->format[PSC_VOLTAGE_OUT] != direct) + return -ENODEV; + break; + default: + return -ENODEV; + } + } + + pmbus_clear_fault_page(client, page); + return 0; +} + +static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data, + struct pmbus_driver_info *info) +{ + struct device *dev = &client->dev; + int page, ret; + + /* + * Some PMBus chips don't support PMBUS_STATUS_BYTE, so try + * to use PMBUS_STATUS_WORD instead if that is the case. + * Bail out if both registers are not supported. + */ + data->status_register = PMBUS_STATUS_BYTE; + ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE); + if (ret < 0 || ret == 0xff) { + data->status_register = PMBUS_STATUS_WORD; + ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD); + if (ret < 0 || ret == 0xffff) { + dev_err(dev, "PMBus status register not found\n"); + return -ENODEV; + } + } + + pmbus_clear_faults(client); + + if (info->identify) { + ret = (*info->identify)(client, info); + if (ret < 0) { + dev_err(dev, "Chip identification failed\n"); + return ret; + } + } + + if (info->pages <= 0 || info->pages > PMBUS_PAGES) { + dev_err(dev, "Bad number of PMBus pages: %d\n", info->pages); + return -ENODEV; + } + + /* Current only using page 1 in BMS project */ + info->pages = 1; + + for (page = 0; page < info->pages; page++) { + ret = pmbus_identify_common(client, data, page); + if (ret < 0) { + dev_err(dev, "Failed to identify chip capabilities\n"); + return ret; + } + } + return 0; +} + +int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info) +{ + struct device *dev = &client->dev; + const struct pmbus_platform_data *pdata = dev_get_platdata(dev); + struct pmbus_data *data; + int ret; + + if (!info) + return -ENODEV; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE + | I2C_FUNC_SMBUS_BYTE_DATA + | I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + data->dev = dev; + + if (pdata) + data->flags = pdata->flags; + data->info = info; + + ret = pmbus_init_common(client, data, info); + if (ret < 0) + return ret; + + ret = pmbus_find_attributes(client, data); + if (ret) + goto out_kfree; + + /* + * If there are no attributes, something is wrong. + * Bail out instead of trying to register nothing. + */ + if (!data->num_attributes) { + dev_err(dev, "No attributes found\n"); + ret = -ENODEV; + goto out_kfree; + } + + data->groups[0] = &data->group; + data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name, + data, data->groups); + if (IS_ERR(data->hwmon_dev)) { + ret = PTR_ERR(data->hwmon_dev); + dev_err(dev, "Failed to register hwmon device\n"); + goto out_kfree; + } + return 0; + +out_kfree: + kfree(data->group.attrs); + return ret; +} + +int pmbus_do_remove(struct i2c_client *client) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + hwmon_device_unregister(data->hwmon_dev); + kfree(data->group.attrs); + return 0; +} + + +/* + * Find sensor groups and status registers on each page. + */ +static void pmbus_find_sensor_groups(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int page; + + /* Sensors detected on page 0 only */ + if (pmbus_check_word_register(client, 0, PMBUS_READ_VIN)) + info->func[0] |= PMBUS_HAVE_VIN; + if (pmbus_check_word_register(client, 0, PMBUS_READ_VCAP)) + info->func[0] |= PMBUS_HAVE_VCAP; + if (pmbus_check_word_register(client, 0, PMBUS_READ_IIN)) + info->func[0] |= PMBUS_HAVE_IIN; + if (pmbus_check_word_register(client, 0, PMBUS_READ_PIN)) + info->func[0] |= PMBUS_HAVE_PIN; + if (info->func[0] + && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) + info->func[0] |= PMBUS_HAVE_STATUS_INPUT; + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { + info->func[0] |= PMBUS_HAVE_FAN12; + if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) + info->func[0] |= PMBUS_HAVE_STATUS_FAN12; + } + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { + info->func[0] |= PMBUS_HAVE_FAN34; + if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) + info->func[0] |= PMBUS_HAVE_STATUS_FAN34; + } + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) + info->func[0] |= PMBUS_HAVE_TEMP; + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) + info->func[0] |= PMBUS_HAVE_TEMP2; + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) + info->func[0] |= PMBUS_HAVE_TEMP3; + if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_TEMP3) + && pmbus_check_byte_register(client, 0, + PMBUS_STATUS_TEMPERATURE)) + info->func[0] |= PMBUS_HAVE_STATUS_TEMP; + + /* Sensors detected on all pages */ + for (page = 0; page < info->pages; page++) { + if (pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) { + info->func[page] |= PMBUS_HAVE_VOUT; + if (pmbus_check_byte_register(client, page, + PMBUS_STATUS_VOUT)) + info->func[page] |= PMBUS_HAVE_STATUS_VOUT; + } + if (pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) { + info->func[page] |= PMBUS_HAVE_IOUT; + if (pmbus_check_byte_register(client, 0, + PMBUS_STATUS_IOUT)) + info->func[page] |= PMBUS_HAVE_STATUS_IOUT; + } + if (pmbus_check_word_register(client, page, PMBUS_READ_POUT)) + info->func[page] |= PMBUS_HAVE_POUT; + } +} + +/* + * Identify chip parameters. + */ +static int pmbus_identify(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int ret = 0; + + if (!info->pages) { + /* + * Check if the PAGE command is supported. If it is, + * keep setting the page number until it fails or until the + * maximum number of pages has been reached. Assume that + * this is the number of pages supported by the chip. + */ + if (pmbus_check_byte_register(client, 0, PMBUS_PAGE)) { + int page; + + for (page = 1; page < PMBUS_PAGES; page++) { + if (pmbus_set_page(client, page) < 0) + break; + } + pmbus_set_page(client, 0); + info->pages = page; + } else { + info->pages = 1; + } + } + + if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) { + int vout_mode; + + vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); + if (vout_mode >= 0 && vout_mode != 0xff) { + switch (vout_mode >> 5) { + case 0: + break; + case 1: + info->format[PSC_VOLTAGE_OUT] = vid; + break; + case 2: + info->format[PSC_VOLTAGE_OUT] = direct; + break; + default: + ret = -ENODEV; + goto abort; + } + } + } + + /* + * We should check if the COEFFICIENTS register is supported. + * If it is, and the chip is configured for direct mode, we can read + * the coefficients from the chip, one set per group of sensor + * registers. + * + * To do this, we will need access to a chip which actually supports the + * COEFFICIENTS command, since the command is too complex to implement + * without testing it. Until then, abort if a chip configured for direct + * mode was detected. + */ + if (info->format[PSC_VOLTAGE_OUT] == direct) { + ret = -ENODEV; + goto abort; + } + + /* Try to find sensor groups */ + pmbus_find_sensor_groups(client, info); +abort: + return ret; +} + +static int pmbus_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct pmbus_driver_info *info; + + info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->pages = id->driver_data; + info->identify = pmbus_identify; + + return pmbus_do_probe(client, id, info); +} + +/* + * Use driver_data to set the number of pages supported by the chip. + */ +static const struct i2c_device_id pmbus_id[] = { + {"fse000", 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, pmbus_id); + +/* This is the driver that will be inserted */ +static struct i2c_driver pmbus_driver = { + .driver = { + .name = "fse000", + }, + .probe = pmbus_probe, + .remove = pmbus_do_remove, + .id_table = pmbus_id, +}; + +module_i2c_driver(pmbus_driver); + +MODULE_DESCRIPTION("mitac_ly1200_32x_fse000 driver"); +MODULE_AUTHOR("Eddy Weng "); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_gpe.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_gpe.c new file mode 100644 index 000000000000..3ced2b0a399b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_gpe.c @@ -0,0 +1,93 @@ +#include +#include + +#define BMS_GPE_CLASS "bms_acpi" +#define BMS_GPE_DRIVER_NAME "bms_gpe" +#define BMS_GPE_DEVICE_NAME "bms_acpi_gpe" + +static int bms_gpe[] = {0x01, 0x02, 0x47}; +static int bms_gpe_num = sizeof(bms_gpe) / sizeof(bms_gpe[0]); + +static u32 bms_gpe_handler(acpi_handle handle, u32 gpe_num, void *context) +{ + struct acpi_device *device = context; + + acpi_bus_generate_netlink_event(device->pnp.device_class,dev_name(&device->dev), + gpe_num, 0); + return ACPI_INTERRUPT_HANDLED; /* GPE will be disable afterward */ +} + +static int bms_gpe_add(struct acpi_device *device) +{ + acpi_status status; + int i = 0; + char info_str[60] = { 0 }; + char temp[6] = { 0 }; + + if (!device) { + printk("No device of BMS GPE\n"); + return -EINVAL; + } + + strcpy(acpi_device_name(device), BMS_GPE_DEVICE_NAME); + strcpy(acpi_device_class(device), BMS_GPE_CLASS); + + strncat(info_str, "Initialized GPE list = ", 23); + for (i = 0; i < bms_gpe_num; i++) { + status = acpi_install_gpe_handler(NULL, bms_gpe[i], + ACPI_GPE_LEVEL_TRIGGERED, + &bms_gpe_handler, device); + if (status != AE_OK) { + printk("Fail to claim BMS GPE%X (code:0x%X)\n",bms_gpe[i],status); + return -EINVAL; + } + snprintf(temp, sizeof(temp), "0x%.2X ", bms_gpe[i]); + strncat(info_str, temp, 6); + } + + dev_info(&device->dev, "%s.\n", info_str); + + return 0; +} + +static int bms_gpe_remove(struct acpi_device *device) +{ + int i = 0; + for (i = 0; i < bms_gpe_num; i++) { + acpi_remove_gpe_handler(NULL, bms_gpe[i], &bms_gpe_handler); + } + return 0; +} + +static const struct acpi_device_id bms_acpi_device_ids[] = { + { "PNP0C01", 0 }, + { /* END OF LIST */ } +}; + +static struct acpi_driver bms_gpe_driver = { + .name = BMS_GPE_DRIVER_NAME, + .class = BMS_GPE_CLASS, + .ids = bms_acpi_device_ids, + .ops = { + .add = bms_gpe_add, + .remove = bms_gpe_remove, + }, +}; + +static int __init bms_gpe_init(void) +{ + printk(KERN_INFO "%s: init.\n", __FUNCTION__); + return acpi_bus_register_driver(&bms_gpe_driver); +} + +static void __exit bms_gpe_exit(void) +{ + printk(KERN_INFO "%s: exit.\n", __FUNCTION__); + acpi_bus_unregister_driver(&bms_gpe_driver); +} + +module_init(bms_gpe_init); +module_exit(bms_gpe_exit); +MODULE_AUTHOR("Yencheng Lin "); +MODULE_DESCRIPTION("mitac_ly1200_32x_gpe driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_master_cpld.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_master_cpld.c new file mode 100644 index 000000000000..921a2ea424a3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_master_cpld.c @@ -0,0 +1,503 @@ +#include +#include + +#include "master_cpld_reg.h" +#include "master_cpld_sysfs.h" + +static int debug_flag = 0; + +struct master_cpld_data { + struct mutex lock; + + struct i2c_client *client; + struct device_attribute bin; +}; + + +static const struct i2c_device_id master_cpld_ids[] = { + { "master_cpld", 0 }, + { /* END OF LIST */ } +}; +MODULE_DEVICE_TABLE(i2c, master_cpld_ids); + +static int master_cpld_raw_read(struct device *dev, struct device_attribute *attr, char *buf, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name){ + unsigned int reg_val = 0, fld_val; + static int debug_flag; + struct master_cpld_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int err; + + if (reg_width != 8){ + printk("%s: Register table width setting failed.\n", reg_name); + return -EINVAL; + } + mutex_lock(&data->lock); + if ((err = i2c_smbus_read_byte_data(client, (u8)reg_offset)) < 0) { + /* CPLD read error condition */; + mutex_unlock(&data->lock); + printk("%s: i2c read failed, error code = %d.\n", reg_name, err); + return err; + } + reg_val = err; + if (debug_flag) { + printk("%s: reg_offset = %d, width = %d, cur value = 0x%x.\n", reg_name, reg_offset, reg_width, reg_val); + } + mutex_unlock(&data->lock); + if (fld_width == reg_width) {fld_val = reg_val & fld_mask;} + else {fld_val = (reg_val >> fld_shift) & fld_mask;} + return sprintf(buf, "0x%x\n", fld_val); +} + +static int master_cpld_raw_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name){ + int ret_code; + unsigned int reg_val, fld_val; + unsigned long val; + static int debug_flag; + struct master_cpld_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + if (reg_width != 8){ + printk("%s: Register table width setting failed.\n", reg_name); + return -EINVAL; + } + /* Parse buf and store to fld_val */ + if ((ret_code = kstrtoul(buf, 16, &val))){ + printk("%s: Conversion value = %s failed, errno = %d.\n", reg_name, buf, ret_code); + return ret_code; + } + fld_val = (unsigned int)val; + mutex_lock(&data->lock); + if ((ret_code = i2c_smbus_read_byte_data(client, (u8)reg_offset)) < 0) { + /* Handle CPLD read error condition */; + mutex_unlock(&data->lock); + printk("%s: i2c read failed, error code = %d.\n", reg_name, ret_code); + return ret_code; + } + reg_val = ret_code; + if (debug_flag) { + printk("%s: offset = %d, width = %d, cur value = 0x%x.\n", reg_name, reg_offset, reg_width, reg_val); + } + if (fld_width == reg_width) {reg_val = fld_val & fld_mask;} + else {reg_val = (reg_val & ~(fld_mask << fld_shift)) | + ((fld_val & (fld_mask)) << fld_shift);} + if ((ret_code = i2c_smbus_write_byte_data(client, (u8)reg_offset, (u8)reg_val)) != 0) { + /* Handle CPLD write error condition */; + mutex_unlock(&data->lock); + printk("%s: i2c write failed, error code = %d.\n", reg_name, ret_code); + return ret_code; + } + else if (debug_flag) { + printk("%s: offset = %d, width = %d, new value = 0x%x.\n", reg_name, reg_offset, reg_width, reg_val); + } + mutex_unlock(&data->lock); + return count; +} + +/*--------------------special file for debug---------------------- */ +static ssize_t master_cpld_debug_read(struct device *dev, struct device_attribute *attr, + char *buf){ + + return sprintf(buf, "%d\n", debug_flag); +} + + +static ssize_t master_cpld_debug_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int temp; + int error; + + error = kstrtoint(buf, 10, &temp); + if (error){ + printk(KERN_INFO "%s: Conversion value = %s failed.\n", __FUNCTION__, buf); + return count; + } + debug_flag = temp; + + if(debug_flag) + printk("%s, debug_flag = %d\n", __FUNCTION__, debug_flag); + + return count; +} +SYSFS_MISC_RW_ATTR_DEF(debug, master_cpld_debug_read, master_cpld_debug_write) + + + + +/* ----------------define port group---------------------------- */ +static struct attribute *port1_attributes[] = { + SYSFS_ATTR_PTR(port1_present), /* register: zqsfp28_present_8_1_status */ + SYSFS_ATTR_PTR(port1_rst), /* register: zqsfp28_rst_8_1 */ + SYSFS_ATTR_PTR(port1_modsel), /* register: zqsfp28_modsel_8_1 */ + SYSFS_ATTR_PTR(port1_lpmode), /* register: zqsfp28_lpmode_8_1 */ + SYSFS_ATTR_PTR(port1_irq_status), /* register: zqsfp28_irq_8_1_status */ + SYSFS_ATTR_PTR(port1_irq_msk), /* register: zqsfp28_irq_msk_8_1_status */ + NULL +}; + + +static struct attribute *port2_attributes[] = { + SYSFS_ATTR_PTR(port2_present), /* register: zqsfp28_present_8_1_status */ + SYSFS_ATTR_PTR(port2_rst), /* register: zqsfp28_rst_8_1 */ + SYSFS_ATTR_PTR(port2_modsel), /* register: zqsfp28_modsel_8_1 */ + SYSFS_ATTR_PTR(port2_lpmode), /* register: zqsfp28_lpmode_8_1 */ + SYSFS_ATTR_PTR(port2_irq_status), /* register: zqsfp28_irq_8_1_status */ + SYSFS_ATTR_PTR(port2_irq_msk), /* register: zqsfp28_irq_msk_8_1_status */ + NULL +}; + + +static struct attribute *port3_attributes[] = { + SYSFS_ATTR_PTR(port3_present), /* register: zqsfp28_present_8_1_status */ + SYSFS_ATTR_PTR(port3_rst), /* register: zqsfp28_rst_8_1 */ + SYSFS_ATTR_PTR(port3_modsel), /* register: zqsfp28_modsel_8_1 */ + SYSFS_ATTR_PTR(port3_lpmode), /* register: zqsfp28_lpmode_8_1 */ + SYSFS_ATTR_PTR(port3_irq_status), /* register: zqsfp28_irq_8_1_status */ + SYSFS_ATTR_PTR(port3_irq_msk), /* register: zqsfp28_irq_msk_8_1_status */ + NULL +}; + +static struct attribute *port4_attributes[] = { + SYSFS_ATTR_PTR(port4_present), /* register: zqsfp28_present_8_1_status */ + SYSFS_ATTR_PTR(port4_rst), /* register: zqsfp28_rst_8_1 */ + SYSFS_ATTR_PTR(port4_modsel), /* register: zqsfp28_modsel_8_1 */ + SYSFS_ATTR_PTR(port4_lpmode), /* register: zqsfp28_lpmode_8_1 */ + SYSFS_ATTR_PTR(port4_irq_status), /* register: zqsfp28_irq_8_1_status */ + SYSFS_ATTR_PTR(port4_irq_msk), /* register: zqsfp28_irq_msk_8_1_status */ + NULL +}; + +static struct attribute *port5_attributes[] = { + SYSFS_ATTR_PTR(port5_present), /* register: zqsfp28_present_8_1_status */ + SYSFS_ATTR_PTR(port5_rst), /* register: zqsfp28_rst_8_1 */ + SYSFS_ATTR_PTR(port5_modsel), /* register: zqsfp28_modsel_8_1 */ + SYSFS_ATTR_PTR(port5_lpmode), /* register: zqsfp28_lpmode_8_1 */ + SYSFS_ATTR_PTR(port5_irq_status), /* register: zqsfp28_irq_8_1_status */ + SYSFS_ATTR_PTR(port5_irq_msk), /* register: zqsfp28_irq_msk_8_1_status */ + NULL +}; + +static struct attribute *port6_attributes[] = { + SYSFS_ATTR_PTR(port6_present), /* register: zqsfp28_present_8_1_status */ + SYSFS_ATTR_PTR(port6_rst), /* register: zqsfp28_rst_8_1 */ + SYSFS_ATTR_PTR(port6_modsel), /* register: zqsfp28_modsel_8_1 */ + SYSFS_ATTR_PTR(port6_lpmode), /* register: zqsfp28_lpmode_8_1 */ + SYSFS_ATTR_PTR(port6_irq_status), /* register: zqsfp28_irq_8_1_status */ + SYSFS_ATTR_PTR(port6_irq_msk), /* register: zqsfp28_irq_msk_8_1_status */ + NULL +}; + +static struct attribute *port7_attributes[] = { + SYSFS_ATTR_PTR(port7_present), /* register: zqsfp28_present_8_1_status */ + SYSFS_ATTR_PTR(port7_rst), /* register: zqsfp28_rst_8_1 */ + SYSFS_ATTR_PTR(port7_modsel), /* register: zqsfp28_modsel_8_1 */ + SYSFS_ATTR_PTR(port7_lpmode), /* register: zqsfp28_lpmode_8_1 */ + SYSFS_ATTR_PTR(port7_irq_status), /* register: zqsfp28_irq_8_1_status */ + SYSFS_ATTR_PTR(port7_irq_msk), /* register: zqsfp28_irq_msk_8_1_status */ + NULL +}; + +static struct attribute *port8_attributes[] = { + SYSFS_ATTR_PTR(port8_present), /* register: zqsfp28_present_8_1_status */ + SYSFS_ATTR_PTR(port8_rst), /* register: zqsfp28_rst_8_1 */ + SYSFS_ATTR_PTR(port8_modsel), /* register: zqsfp28_modsel_8_1 */ + SYSFS_ATTR_PTR(port8_lpmode), /* register: zqsfp28_lpmode_8_1 */ + SYSFS_ATTR_PTR(port8_irq_status), /* register: zqsfp28_irq_8_1_status */ + SYSFS_ATTR_PTR(port8_irq_msk), /* register: zqsfp28_irq_msk_8_1_status */ + NULL +}; + +static struct attribute *port9_attributes[] = { + SYSFS_ATTR_PTR(port9_present), /* register: zqsfp28_present_16_9_status */ + SYSFS_ATTR_PTR(port9_rst), /* register: zqsfp28_rst_16_9 */ + SYSFS_ATTR_PTR(port9_modsel), /* register: zqsfp28_modsel_16_9 */ + SYSFS_ATTR_PTR(port9_lpmode), /* register: zqsfp28_lpmode_16_9 */ + SYSFS_ATTR_PTR(port9_irq_status), /* register: zqsfp28_irq_16_9_status */ + SYSFS_ATTR_PTR(port9_irq_msk), /* register: zqsfp28_irq_msk_16_9_status */ + NULL +}; + +static struct attribute *port10_attributes[] = { + SYSFS_ATTR_PTR(port10_present), /* register: zqsfp28_present_16_9_status */ + SYSFS_ATTR_PTR(port10_rst), /* register: zqsfp28_rst_16_9 */ + SYSFS_ATTR_PTR(port10_modsel), /* register: zqsfp28_modsel_16_9 */ + SYSFS_ATTR_PTR(port10_lpmode), /* register: zqsfp28_lpmode_16_9 */ + SYSFS_ATTR_PTR(port10_irq_status), /* register: zqsfp28_irq_16_9_status */ + SYSFS_ATTR_PTR(port10_irq_msk), /* register: zqsfp28_irq_msk_16_9_status */ + NULL +}; + +static struct attribute *port11_attributes[] = { + SYSFS_ATTR_PTR(port11_present), /* register: zqsfp28_present_16_9_status */ + SYSFS_ATTR_PTR(port11_rst), /* register: zqsfp28_rst_16_9 */ + SYSFS_ATTR_PTR(port11_modsel), /* register: zqsfp28_modsel_16_9 */ + SYSFS_ATTR_PTR(port11_lpmode), /* register: zqsfp28_lpmode_16_9 */ + SYSFS_ATTR_PTR(port11_irq_status), /* register: zqsfp28_irq_16_9_status */ + SYSFS_ATTR_PTR(port11_irq_msk), /* register: zqsfp28_irq_msk_16_9_status */ + NULL +}; + +static struct attribute *port12_attributes[] = { + SYSFS_ATTR_PTR(port12_present), /* register: zqsfp28_present_16_9_status */ + SYSFS_ATTR_PTR(port12_rst), /* register: zqsfp28_rst_16_9 */ + SYSFS_ATTR_PTR(port12_modsel), /* register: zqsfp28_modsel_16_9 */ + SYSFS_ATTR_PTR(port12_lpmode), /* register: zqsfp28_lpmode_16_9 */ + SYSFS_ATTR_PTR(port12_irq_status), /* register: zqsfp28_irq_16_9_status */ + SYSFS_ATTR_PTR(port12_irq_msk), /* register: zqsfp28_irq_msk_16_9_status */ + NULL +}; + +static struct attribute *port13_attributes[] = { + SYSFS_ATTR_PTR(port13_present), /* register: zqsfp28_present_16_9_status */ + SYSFS_ATTR_PTR(port13_rst), /* register: zqsfp28_rst_16_9 */ + SYSFS_ATTR_PTR(port13_modsel), /* register: zqsfp28_modsel_16_9 */ + SYSFS_ATTR_PTR(port13_lpmode), /* register: zqsfp28_lpmode_16_9 */ + SYSFS_ATTR_PTR(port13_irq_status), /* register: zqsfp28_irq_16_9_status */ + SYSFS_ATTR_PTR(port13_irq_msk), /* register: zqsfp28_irq_msk_16_9_status */ + NULL +}; + +static struct attribute *port14_attributes[] = { + SYSFS_ATTR_PTR(port14_present), /* register: zqsfp28_present_16_9_status */ + SYSFS_ATTR_PTR(port14_rst), /* register: zqsfp28_rst_16_9 */ + SYSFS_ATTR_PTR(port14_modsel), /* register: zqsfp28_modsel_16_9 */ + SYSFS_ATTR_PTR(port14_lpmode), /* register: zqsfp28_lpmode_16_9 */ + SYSFS_ATTR_PTR(port14_irq_status), /* register: zqsfp28_irq_16_9_status */ + SYSFS_ATTR_PTR(port14_irq_msk), /* register: zqsfp28_irq_msk_16_9_status */ + NULL +}; + +static struct attribute *port15_attributes[] = { + SYSFS_ATTR_PTR(port15_present), /* register: zqsfp28_present_16_9_status */ + SYSFS_ATTR_PTR(port15_rst), /* register: zqsfp28_rst_16_9 */ + SYSFS_ATTR_PTR(port15_modsel), /* register: zqsfp28_modsel_16_9 */ + SYSFS_ATTR_PTR(port15_lpmode), /* register: zqsfp28_lpmode_16_9 */ + SYSFS_ATTR_PTR(port15_irq_status), /* register: zqsfp28_irq_16_9_status */ + SYSFS_ATTR_PTR(port15_irq_msk), /* register: zqsfp28_irq_msk_16_9_status */ + NULL +}; + +static struct attribute *port16_attributes[] = { + SYSFS_ATTR_PTR(port16_present), /* register: zqsfp28_present_16_9_status */ + SYSFS_ATTR_PTR(port16_rst), /* register: zqsfp28_rst_16_9 */ + SYSFS_ATTR_PTR(port16_modsel), /* register: zqsfp28_modsel_16_9 */ + SYSFS_ATTR_PTR(port16_lpmode), /* register: zqsfp28_lpmode_16_9 */ + SYSFS_ATTR_PTR(port16_irq_status), /* register: zqsfp28_irq_16_9_status */ + SYSFS_ATTR_PTR(port16_irq_msk), /* register: zqsfp28_irq_msk_16_9_status */ + NULL +}; + + +static const struct attribute_group master_cpld_port_group[] = { + {.attrs = port1_attributes, + .name = "port1",}, + {.attrs = port2_attributes, + .name = "port2",}, + {.attrs = port3_attributes, + .name = "port3",}, + {.attrs = port4_attributes, + .name = "port4",}, + {.attrs = port5_attributes, + .name = "port5",}, + {.attrs = port6_attributes, + .name = "port6",}, + {.attrs = port7_attributes, + .name = "port7",}, + {.attrs = port8_attributes, + .name = "port8",}, + {.attrs = port9_attributes, + .name = "port9",}, + {.attrs = port10_attributes, + .name = "port10",}, + {.attrs = port11_attributes, + .name = "port11",}, + {.attrs = port12_attributes, + .name = "port12",}, + {.attrs = port13_attributes, + .name = "port13",}, + {.attrs = port14_attributes, + .name = "port14",}, + {.attrs = port15_attributes, + .name = "port15",}, + {.attrs = port16_attributes, + .name = "port16",} +}; + +/* ----------------define misc group---------------------------- */ +static struct attribute *misc_attributes[] = { + SYSFS_ATTR_PTR(mjr_rev), /* register: mstr_cpld_rev */ + SYSFS_ATTR_PTR(mnr_rev), /* register: mstr_cpld_rev */ + + SYSFS_ATTR_PTR(scrtch_reg), /* register: mstr_cpld_gpr */ + + SYSFS_ATTR_PTR(brd_rev), /* register: mb_brd_rev_type */ + SYSFS_ATTR_PTR(brd_type), /* register: mb_brd_rev_type */ + + SYSFS_ATTR_PTR(mb_rst), /* register: mstr_srr */ + SYSFS_ATTR_PTR(npu_rst), /* register: mstr_srr */ + SYSFS_ATTR_PTR(mgmt_phy_rst), /* register: mstr_srr */ + + SYSFS_ATTR_PTR(mb_eeprom_wp), /* register: eeprom_wp */ + SYSFS_ATTR_PTR(cpld_spi_wp), /* register: eeprom_wp */ + SYSFS_ATTR_PTR(fan_eeprom_wp), /* register: eeprom_wp */ + + SYSFS_ATTR_PTR(ps2_int_msk), /* register: mstr_irq */ + SYSFS_ATTR_PTR(ps1_int_msk), /* register: mstr_irq */ + SYSFS_ATTR_PTR(usb_fault_msk), /* register: mstr_irq */ + SYSFS_ATTR_PTR(pcie_int_msk), /* register: mstr_irq */ + SYSFS_ATTR_PTR(fan_alert_int_msk), /* register: mstr_irq */ + SYSFS_ATTR_PTR(usb_fault), /* register: mstr_irq */ + SYSFS_ATTR_PTR(pcie_int), /* register: mstr_irq */ + SYSFS_ATTR_PTR(fan_alert_int), /* register: mstr_irq */ + SYSFS_ATTR_PTR(system_led_fld), /* register: mstr_irq */ + SYSFS_ATTR_PTR(power_led), /* register: mstr_irq */ + SYSFS_ATTR_PTR(fan_led), /* register: mstr_irq */ + SYSFS_ATTR_PTR(locate_led), /* register: mstr_irq */ + + SYSFS_ATTR_PTR(led_test), /* register: fan_tray_3_1_led */ + SYSFS_ATTR_PTR(fan_tray3_led), /* register: fan_tray_3_1_led */ + SYSFS_ATTR_PTR(fan_tray2_led), /* register: fan_tray_3_1_led */ + SYSFS_ATTR_PTR(fan_tray1_led), /* register: fan_tray_3_1_led */ + SYSFS_ATTR_PTR(fan_tray6_led), /* register: fan_tray_6_4_led */ + SYSFS_ATTR_PTR(fan_tray5_led), /* register: fan_tray_6_4_led */ + SYSFS_ATTR_PTR(fan_tray4_led), /* register: fan_tray_6_4_led */ + + SYSFS_ATTR_PTR(fan_tray6_present), /* register: fan_tray_status */ + SYSFS_ATTR_PTR(fan_tray5_present), /* register: fan_tray_status */ + SYSFS_ATTR_PTR(fan_tray4_present), /* register: fan_tray_status */ + SYSFS_ATTR_PTR(fan_tray3_present), /* register: fan_tray_status */ + SYSFS_ATTR_PTR(fan_tray2_present), /* register: fan_tray_status */ + SYSFS_ATTR_PTR(fan_tray1_present), /* register: fan_tray_status */ + + SYSFS_ATTR_PTR(fan_type6), /* register: fan_type_status */ + SYSFS_ATTR_PTR(fan_type5), /* register: fan_type_status */ + SYSFS_ATTR_PTR(fan_type4), /* register: fan_type_status */ + SYSFS_ATTR_PTR(fan_type3), /* register: fan_type_status */ + SYSFS_ATTR_PTR(fan_type2), /* register: fan_type_status */ + SYSFS_ATTR_PTR(fan_type1), /* register: fan_type_status */ + + SYSFS_ATTR_PTR(ps1_ps), /* register: psu_en_status */ + SYSFS_ATTR_PTR(ps1_pg), /* register: psu_en_status */ + SYSFS_ATTR_PTR(ps1_int), /* register: psu_en_status */ + SYSFS_ATTR_PTR(ps1_on), /* register: psu_en_status */ + SYSFS_ATTR_PTR(ps2_ps), /* register: psu_en_status */ + SYSFS_ATTR_PTR(ps2_pg), /* register: psu_en_status */ + SYSFS_ATTR_PTR(ps2_int), /* register: psu_en_status */ + SYSFS_ATTR_PTR(ps2_on), /* register: psu_en_status */ + + SYSFS_ATTR_PTR(usb1_vbus_en), /* register: mb_pwr_en_status */ + SYSFS_ATTR_PTR(v5p0_en), /* register: mb_pwr_en_status */ + SYSFS_ATTR_PTR(v3p3_en), /* register: mb_pwr_en_status */ + SYSFS_ATTR_PTR(vcc_1v8_en), /* register: mb_pwr_en_status */ + SYSFS_ATTR_PTR(mac_avs1v_en), /* register: mb_pwr_en_status */ + SYSFS_ATTR_PTR(mac1v_en), /* register: mb_pwr_en_status */ + SYSFS_ATTR_PTR(vcc_1v25_en), /* register: mb_pwr_en_status */ + + SYSFS_ATTR_PTR(vcc_3p3_cpld), /* register: mb_pwr_status */ + SYSFS_ATTR_PTR(vcc5v_pg), /* register: mb_pwr_status */ + SYSFS_ATTR_PTR(vcc3v3_pg), /* register: mb_pwr_status */ + SYSFS_ATTR_PTR(vcc_1v8_pg), /* register: mb_pwr_status */ + SYSFS_ATTR_PTR(mac_avs1v_pg), /* register: mb_pwr_status */ + SYSFS_ATTR_PTR(mac1v_pg), /* register: mb_pwr_status */ + SYSFS_ATTR_PTR(vcc_1v25_pg), /* register: mb_pwr_status */ + + SYSFS_ATTR_PTR(port_1_8_present), /* register: zqsfp28_present_8_1_status */ + SYSFS_ATTR_PTR(port_9_16_present), /* register: zqsfp28_present_16_9_status */ + SYSFS_ATTR_PTR(port_1_8_rst), /* register: zqsfp28_rst_8_1 */ + SYSFS_ATTR_PTR(port_9_16_rst), /* register: zqsfp28_rst_16_9 */ + SYSFS_ATTR_PTR(port_1_8_modsel), /* register: zqsfp28_modsel_8_1 */ + SYSFS_ATTR_PTR(port_9_16_modsel), /* register: zqsfp28_modsel_16_9 */ + SYSFS_ATTR_PTR(port_1_8_irq_status), /* register: zqsfp28_irq_8_1_status */ + SYSFS_ATTR_PTR(port_9_16_irq_status),/* register: zqsfp28_irq_16_9_status */ + SYSFS_ATTR_PTR(port_1_8_irq_msk), /* register: zqsfp28_irq_msk_8_1_status */ + SYSFS_ATTR_PTR(port_9_16_irq_msk), /* register: zqsfp28_irq_msk_16_9_status */ + SYSFS_ATTR_PTR(port_1_8_lpmode), /* register: zqsfp28_lpmode_8_1 */ + SYSFS_ATTR_PTR(port_9_16_lpmode), /* register: zqsfp28_lpmode_16_9 */ + + SYSFS_ATTR_PTR(fan_tray1_6_present), /* register: fan_tray_status */ + SYSFS_ATTR_PTR(psu_en_status_fld), /* register: psu_en_status*/ + + SYSFS_ATTR_PTR(debug), /* debug flag for print more messages */ + NULL +}; +static const struct attribute_group master_cpld_group_misc = { + .attrs = misc_attributes, +}; + +static int master_cpld_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct master_cpld_data *master_cpld; + int err, i; + int grp_number = (int)( sizeof(master_cpld_port_group) / sizeof(master_cpld_port_group[0])); + + /* allocate memory to master_cpld */ + master_cpld = devm_kzalloc(&client->dev, sizeof(struct master_cpld_data) , GFP_KERNEL); + + if (!master_cpld) + return -ENOMEM; + + mutex_init(&master_cpld->lock); + + for(i = 0 ; i < grp_number ; i++){ + err = sysfs_create_group(&client->dev.kobj, &master_cpld_port_group[i]); + if (err){ + printk("%s: Error creeat port group %d.\n", __FUNCTION__, i+1); + } + } + err = sysfs_create_group(&client->dev.kobj, &master_cpld_group_misc); + if (err){ + printk("%s: Error creeat misc group.\n", __FUNCTION__); + } + + master_cpld->client = client; + i2c_set_clientdata(client, master_cpld); + + printk(KERN_INFO "%s: Master CPLD LCMXO3LF created.\n", __FUNCTION__); + + return 0; + +} + +static int master_cpld_remove(struct i2c_client *client) +{ + int i; + int grp_number = (int)( sizeof(master_cpld_port_group) / sizeof(master_cpld_port_group[0])); + + for(i = 0 ; i < grp_number ; i++){ + sysfs_remove_group(&client->dev.kobj, &master_cpld_port_group[i]); + } + sysfs_remove_group(&client->dev.kobj, &master_cpld_group_misc); + + printk(KERN_INFO "%s: Master CPLD removed.\n", __FUNCTION__); + return 0; +} + +static struct i2c_driver master_cpld_driver = { + .driver = { + .name = "master_cpld", + .owner = THIS_MODULE, + }, + .probe = master_cpld_probe, + .remove = master_cpld_remove, + .id_table = master_cpld_ids, +}; + +static int __init master_cpld_init(void) +{ + printk(KERN_INFO "%s: init.\n", __FUNCTION__); + return i2c_add_driver(&master_cpld_driver); +} +module_init(master_cpld_init); + +static void __exit master_cpld_exit(void) +{ + printk(KERN_INFO "%s: exit.\n", __FUNCTION__); + i2c_del_driver(&master_cpld_driver); +} +module_exit(master_cpld_exit); + +MODULE_DESCRIPTION("mitac_ly1200_32x_master_cpld driver"); +MODULE_AUTHOR("Eddy Weng "); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_pb_i2c.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_pb_i2c.c new file mode 100644 index 000000000000..bad9260ab4ca --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_pb_i2c.c @@ -0,0 +1,137 @@ +#include +#include +#include "bms_i2c.h" + +#define BMS_PB_I2C_CLIENT_NUM 6 + +static struct i2c_client *bms_pb_clients[BMS_PB_I2C_CLIENT_NUM] = {NULL}; +static int bms_pb_client_index = 0; + +static int __init __find_i2c_adap(struct device *dev, void *data) +{ + const char *name = data; + static const char *prefix = "i2c-"; + struct i2c_adapter *adapter; + + if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0) + { + return 0; + } + adapter = to_i2c_adapter(dev); + + return (strncmp(adapter->name, name, strlen(name)) == 0); +} + +static int __init find_i2c_adapter_num(enum i2c_adapter_type type) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + const char *name = bms_i2c_adapter_names[type]; + + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", + __func__, name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + + return adapter->nr; +} + + +static int __init find_i2c_mux_adapter_num(int parent_num, int num) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + char name[48]; + + snprintf(name, sizeof(name), "i2c-%d-mux (chan_id %d)", + parent_num, num); + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", + __func__, name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + + return adapter->nr; +} + +static __init struct i2c_client *bms_pb_setup_eeprom_24c01( + struct i2c_adapter *adap, int addr) +{ + struct i2c_board_info info_spd = { + I2C_BOARD_INFO("24c01", addr), + }; + + return i2c_new_device(adap, &info_spd); +} + + +static int __init bms_pb_setup_devices(void) +{ + struct i2c_adapter *adap; + int adap_num; + int parent_num; + + parent_num = find_i2c_adapter_num(I2C_ADAPTER_ISMT); + if (parent_num < 0) + return parent_num; + + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN3); + if (adap_num < 0) + return adap_num; + + adap = i2c_get_adapter(adap_num); + if (!adap) { + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + goto exit; + } + + bms_pb_clients[bms_pb_client_index++] = bms_pb_setup_eeprom_24c01(adap, 0x50); + bms_pb_clients[bms_pb_client_index++] = bms_pb_setup_eeprom_24c01(adap, 0x51); + +exit: + return 0; +} + +static int __init bms_pb_i2c_init(void) +{ + /* Initial bms_sb_slients array. */ + memset(bms_pb_clients, 0x0, BMS_PB_I2C_CLIENT_NUM); + + bms_pb_setup_devices(); + return 0; +} + + +static void __exit bms_pb_i2c_exit(void){ + int i; + + for (i=(bms_pb_client_index-1); i>=0; i--) { + if (bms_pb_clients[i]) { + i2c_unregister_device(bms_pb_clients[i]); + bms_pb_clients[i] = NULL; + } + } + + bms_pb_client_index = 0; + + +} + + +module_init(bms_pb_i2c_init); +module_exit(bms_pb_i2c_exit); + + +MODULE_DESCRIPTION("mitac_ly1200_32x_pb_i2c driver"); +MODULE_AUTHOR("Eddy Weng "); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_sb_i2c.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_sb_i2c.c new file mode 100644 index 000000000000..e2a9718863ff --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_sb_i2c.c @@ -0,0 +1,514 @@ +#include +#include +#include +#include +#include +#include +#include "bms_i2c.h" + +/* Don't include MAC_AVS_1V */ +#define BMS_SB_I2C_CLIENT_NUM 35 +#define BMS_SB_ADAPTER_BASE 2 +#define BMS_SB_STAGE2_MUX_BUS_BASE 6 + + +static struct i2c_client *bms_sb_clients[BMS_SB_I2C_CLIENT_NUM] = {NULL}; +static int bms_sb_client_index = 0; + +enum bms_sb_switch_stage2_mux0_bus { + I2C_STAGE2_MUX0_CHAN0 = 0, + I2C_STAGE2_MUX0_CHAN1, + I2C_STAGE2_MUX0_CHAN2, + I2C_STAGE2_MUX0_CHAN3, + I2C_STAGE2_MUX0_CHAN4, + I2C_STAGE2_MUX0_CHAN5, + I2C_STAGE2_MUX0_CHAN6, + I2C_STAGE2_MUX0_CHAN7, +}; + +enum bms_sb_switch_stage2_mux1_bus { + I2C_STAGE2_MUX1_CHAN8 = 0, + I2C_STAGE2_MUX1_CHAN9, + I2C_STAGE2_MUX1_CHAN10, + I2C_STAGE2_MUX1_CHAN11, + I2C_STAGE2_MUX1_CHAN12, + I2C_STAGE2_MUX1_CHAN13, + I2C_STAGE2_MUX1_CHAN14, + I2C_STAGE2_MUX1_CHAN15, +}; + +enum bms_sb_switch_stage2_mux2_bus { + I2C_STAGE2_MUX2_CHAN16 = 0, + I2C_STAGE2_MUX2_CHAN17, + I2C_STAGE2_MUX2_CHAN18, + I2C_STAGE2_MUX2_CHAN19, + I2C_STAGE2_MUX2_CHAN20, + I2C_STAGE2_MUX2_CHAN21, + I2C_STAGE2_MUX2_CHAN22, + I2C_STAGE2_MUX2_CHAN23, +}; + +enum bms_sb_switch_stage2_mux3_bus { + I2C_STAGE2_MUX3_CHAN24 = 0, + I2C_STAGE2_MUX3_CHAN25, + I2C_STAGE2_MUX3_CHAN26, + I2C_STAGE2_MUX3_CHAN27, + I2C_STAGE2_MUX3_CHAN28, + I2C_STAGE2_MUX3_CHAN29, + I2C_STAGE2_MUX3_CHAN30, + I2C_STAGE2_MUX3_CHAN31, +}; + +static struct pca954x_platform_mode pmode_pca9548_mux[] = { + { .adap_id = BMS_SB_ADAPTER_BASE + 0, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 1, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 2, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 3, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 4, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 5, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 6, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 7, }, +}; + +static struct pca954x_platform_data platdata_pca9548_mux = { + .modes = pmode_pca9548_mux, + .num_modes = ARRAY_SIZE(pmode_pca9548_mux), +}; + +static struct pca954x_platform_mode pmode_stage1_pca9548_mux0[] = { + { .adap_id = BMS_SB_ADAPTER_BASE + 8, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 9, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 10, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 11, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 12, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 13, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 14, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 15, }, +}; + +static struct pca954x_platform_data platdata_stage1_pca9548_mux0 = { + .modes = pmode_stage1_pca9548_mux0, + .num_modes = ARRAY_SIZE(pmode_stage1_pca9548_mux0), +}; + +static struct pca954x_platform_mode pmode_stage1_pca9548_mux1[] = { + { .adap_id = BMS_SB_ADAPTER_BASE + 16, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 17, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 18, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 19, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 20, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 21, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 22, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 23, }, +}; + +static struct pca954x_platform_data platdata_stage1_pca9548_mux1 = { + .modes = pmode_stage1_pca9548_mux1, + .num_modes = ARRAY_SIZE(pmode_stage1_pca9548_mux1), +}; + +static struct pca954x_platform_mode pmode_stage1_pca9548_mux2[] = { + { .adap_id = BMS_SB_ADAPTER_BASE + 24, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 25, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 26, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 27, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 28, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 29, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 30, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 31, }, +}; + +static struct pca954x_platform_data platdata_stage1_pca9548_mux2 = { + .modes = pmode_stage1_pca9548_mux2, + .num_modes = ARRAY_SIZE(pmode_stage1_pca9548_mux2), +}; + +static struct pca954x_platform_mode pmode_stage1_pca9548_mux3[] = { + { .adap_id = BMS_SB_ADAPTER_BASE + 32, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 33, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 34, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 35, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 36, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 37, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 38, }, + { .adap_id = BMS_SB_ADAPTER_BASE + 39, }, +}; + +static struct pca954x_platform_data platdata_stage1_pca9548_mux3 = { + .modes = pmode_stage1_pca9548_mux3, + .num_modes = ARRAY_SIZE(pmode_stage1_pca9548_mux3), +}; + +static int __init __find_i2c_adap(struct device *dev, void *data) +{ + const char *name = data; + static const char *prefix = "i2c-"; + struct i2c_adapter *adapter; + + if (strncmp(dev_name(dev), prefix, strlen(prefix)) != 0) + { + return 0; + } + adapter = to_i2c_adapter(dev); + + return (strncmp(adapter->name, name, strlen(name)) == 0); +} + +static int __init find_i2c_adapter_num(enum i2c_adapter_type type) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + const char *name = bms_i2c_adapter_names[type]; + + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", + __func__, name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + + return adapter->nr; +} + +static int __init find_i2c_mux_adapter_num(int parent_num, int num) +{ + struct device *dev = NULL; + struct i2c_adapter *adapter; + char name[48]; + + snprintf(name, sizeof(name), "i2c-%d-mux (chan_id %d)", + parent_num, num); + /* find the adapter by name */ + dev = bus_find_device(&i2c_bus_type, NULL, (void *)name, + __find_i2c_adap); + if (!dev) { + pr_err("%s: i2c adapter %s not found on system.\n", + __func__, name); + return -ENODEV; + } + adapter = to_i2c_adapter(dev); + + return adapter->nr; +} + +static __init struct i2c_client *bms_sb_setup_eeprom_24c04( + struct i2c_adapter *adap) +{ + struct i2c_board_info info_spd = { + I2C_BOARD_INFO("24c04", 0x50), + }; + + return i2c_new_device(adap, &info_spd); +} + +static __init struct i2c_client *bms_sb_setup_tmp75( + struct i2c_adapter *adap, int addr) +{ + struct i2c_board_info info_spd = { + I2C_BOARD_INFO("tmp75", addr), + }; + + return i2c_new_device(adap, &info_spd); +} + +static __init struct i2c_client *bms_sb_setup_switch(struct i2c_adapter *adap) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("pca9548", 0x70), + .platform_data = &platdata_pca9548_mux, + }; + + return i2c_new_device(adap, &info); +} + +static __init struct i2c_client *bms_sb_setup_stage1_mux0(struct i2c_adapter *adap) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("pca9548", 0x71), + .platform_data = &platdata_stage1_pca9548_mux0, + }; + + return i2c_new_device(adap, &info); +} + +static __init struct i2c_client *bms_sb_setup_stage1_mux1(struct i2c_adapter *adap) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("pca9548", 0x72), + .platform_data = &platdata_stage1_pca9548_mux1, + }; + + return i2c_new_device(adap, &info); +} + +static __init struct i2c_client *bms_sb_setup_stage1_mux2(struct i2c_adapter *adap) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("pca9548", 0x73), + .platform_data = &platdata_stage1_pca9548_mux2, + }; + + return i2c_new_device(adap, &info); +} + +static __init struct i2c_client *bms_sb_setup_stage1_mux3(struct i2c_adapter *adap) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("pca9548", 0x74), + .platform_data = &platdata_stage1_pca9548_mux3, + }; + + return i2c_new_device(adap, &info); +} + +static __init struct i2c_client *bms_sb_setup_slave_cpld(struct i2c_adapter *adap) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("slave_cpld", 0x33), + }; + + return i2c_new_device(adap, &info); +} + +static __init struct i2c_client *bms_sb_setup_master_cpld(struct i2c_adapter *adap) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("master_cpld", 0x32), + }; + + return i2c_new_device(adap, &info); +} + +static __init struct i2c_client *bms_sb_setup_sff8436(struct i2c_adapter *adap) +{ + struct i2c_board_info info = { + I2C_BOARD_INFO("sff8436", 0x50), + }; + + return i2c_new_device(adap, &info); +} + +static int __init bms_sb_setup_devices_ismt(void) +{ + struct i2c_adapter *adap; + int adap_num = find_i2c_adapter_num(I2C_ADAPTER_ISMT); + + if (adap_num < 0) + return adap_num; + + adap = i2c_get_adapter(adap_num); + if (!adap) { + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + return 0; + } + + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_switch(adap); + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_master_cpld(adap); + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_slave_cpld(adap); + + return 0; +} + +static int __init bms_sb_setup_devices_stage1(void) +{ + struct i2c_adapter *adap; + int adap_num; + int parent_num; + + parent_num = find_i2c_adapter_num(I2C_ADAPTER_ISMT); + if (parent_num < 0) + return parent_num; + + /* Mux chan0 steup */ + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN0); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_eeprom_24c04(adap); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN0); + } + + /* Mux chan1 connect to fan board */ + + /* Mux chan2 steup */ + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN2); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_tmp75(adap, 0x4a); + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_tmp75(adap, 0x4b); + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_tmp75(adap, 0x4c); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN2); + } + + /* Mux chan3 connect to power board */ + + /* Mux chan4 setup for i2c mux0 */ + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN4); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_stage1_mux0(adap); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN4); + } + + /* Mux chan5 setup for i2c mux1 */ + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN5); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_stage1_mux1(adap); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN5); + } + + /* Mux chan6 setup for i2c mux2 */ + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN6); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_stage1_mux2(adap); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN6); + } + + /* Mux chan7 setup for i2c mux3 */ + adap_num = find_i2c_mux_adapter_num(parent_num, I2C_STAGE1_MUX_CHAN7); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_stage1_mux3(adap); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN7); + } + + return 0; +} + +static int __init bms_sb_setup_devices_stage2(void) +{ + struct i2c_adapter *adap; + int adap_num; + int i2c_base = sizeof(bms_i2c_adapter_names) / sizeof(bms_i2c_adapter_names[0]); + int i; + + /* stage2 mux0 chan0~7 install sff8436 */ + for(i = I2C_STAGE2_MUX0_CHAN0; i <= I2C_STAGE2_MUX0_CHAN7; i++){ + adap_num = find_i2c_mux_adapter_num(I2C_STAGE1_MUX_CHAN4 + i2c_base, I2C_STAGE2_MUX0_CHAN0 + i); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_sff8436(adap); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN4 + i2c_base); + } + } + + /* stage2 mux1 chan0~7 install sff8436 */ + for(i = I2C_STAGE2_MUX1_CHAN8; i <= I2C_STAGE2_MUX1_CHAN15; i++){ + adap_num = find_i2c_mux_adapter_num(I2C_STAGE1_MUX_CHAN5 + i2c_base, I2C_STAGE2_MUX1_CHAN8 + i); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_sff8436(adap); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN5 + i2c_base); + } + } + + /* stage2 mux2 chan0~7 install sff8436 */ + for(i = I2C_STAGE2_MUX2_CHAN16; i <= I2C_STAGE2_MUX2_CHAN23; i++){ + adap_num = find_i2c_mux_adapter_num(I2C_STAGE1_MUX_CHAN6 + i2c_base, I2C_STAGE2_MUX2_CHAN16 + i); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_sff8436(adap); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN6 + i2c_base); + } + } + + /* stage2 mux3 chan0~7 install sff8436 */ + for(i = I2C_STAGE2_MUX3_CHAN24; i <= I2C_STAGE2_MUX3_CHAN31; i++){ + adap_num = find_i2c_mux_adapter_num(I2C_STAGE1_MUX_CHAN7 + i2c_base, I2C_STAGE2_MUX3_CHAN24 + i); + if (adap_num >= 0){ + adap = i2c_get_adapter(adap_num); + if(adap) { + bms_sb_clients[bms_sb_client_index++] = bms_sb_setup_sff8436(adap); + }else{ + pr_err("%s failed to get i2c adap %d.\n", __func__, adap_num); + } + }else{ + pr_err("%s failed to find i2c mux adap number %d.\n", __func__, I2C_STAGE1_MUX_CHAN7 + i2c_base); + } + } +} + +static int __init bms_sb_i2c_init(void) +{ + /* Initial bms_sb_slients array. */ + memset(bms_sb_clients, 0x0, BMS_SB_I2C_CLIENT_NUM); + + bms_sb_setup_devices_ismt(); + mdelay(200); + bms_sb_setup_devices_stage1(); + mdelay(200); + bms_sb_setup_devices_stage2(); + + return 0; +} + +static void __exit bms_sb_i2c_exit(void){ + int i; + + for (i=(bms_sb_client_index-1); i>=0; i--) { + if (bms_sb_clients[i]) { + i2c_unregister_device(bms_sb_clients[i]); + bms_sb_clients[i] = NULL; + } + } + + bms_sb_client_index = 0; + +} + +module_init(bms_sb_i2c_init); +module_exit(bms_sb_i2c_exit); + +MODULE_DESCRIPTION("mitac_ly1200_32x_sb_i2c driver"); +MODULE_AUTHOR("Eddy Weng "); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_slave_cpld.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_slave_cpld.c new file mode 100644 index 000000000000..8809573fa4ad --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_slave_cpld.c @@ -0,0 +1,427 @@ +#include +#include + +#include "slave_cpld_reg.h" +#include "slave_cpld_sysfs.h" + +static int debug_flag = 0; + +struct slave_cpld_data { + struct mutex lock; + + struct i2c_client *client; + struct device_attribute bin; +}; + + +static const struct i2c_device_id slave_cpld_ids[] = { + { "slave_cpld", 0 }, + { /* END OF LIST */ } +}; +MODULE_DEVICE_TABLE(i2c, slave_cpld_ids); + +static int slave_cpld_raw_read(struct device *dev, struct device_attribute *attr, char *buf, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name){ + unsigned int reg_val = 0, fld_val; + static int debug_flag; + struct slave_cpld_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int err; + + if (reg_width != 8){ + printk("%s: Register table width setting failed.\n", reg_name); + return -EINVAL; + } + mutex_lock(&data->lock); + if ((err = i2c_smbus_read_byte_data(client, (u8)reg_offset)) < 0) { + /* CPLD read error condition */; + mutex_unlock(&data->lock); + printk("%s: i2c read failed, error code = %d.\n", reg_name, err); + return err; + } + reg_val = err; + if (debug_flag) { + printk("%s: reg_offset = %d, width = %d, cur value = 0x%x.\n", reg_name, reg_offset, reg_width, reg_val); + } + mutex_unlock(&data->lock); + if (fld_width == reg_width) {fld_val = reg_val & fld_mask;} + else {fld_val = (reg_val >> fld_shift) & fld_mask;} + return sprintf(buf, "0x%x\n", fld_val); +} + +static int slave_cpld_raw_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name){ + int ret_code; + unsigned int reg_val, fld_val; + unsigned long val; + static int debug_flag; + struct slave_cpld_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + if (reg_width != 8){ + printk("%s: Register table width setting failed.\n", reg_name); + return -EINVAL; + } + /* Parse buf and store to fld_val */ + if ((ret_code = kstrtoul(buf, 16, &val))){ + printk("%s: Conversion value = %s failed, errno = %d.\n", reg_name, buf, ret_code); + return ret_code; + } + fld_val = (unsigned int)val; + mutex_lock(&data->lock); + if ((ret_code = i2c_smbus_read_byte_data(client, (u8)reg_offset)) < 0) { + /* Handle CPLD read error condition */; + mutex_unlock(&data->lock); + printk("%s: i2c read failed, error code = %d.\n", reg_name, ret_code); + return ret_code; + } + reg_val = ret_code; + if (debug_flag) { + printk("%s: offset = %d, width = %d, cur value = 0x%x.\n", reg_name, reg_offset, reg_width, reg_val); + } + if (fld_width == reg_width) {reg_val = fld_val & fld_mask;} + else {reg_val = (reg_val & ~(fld_mask << fld_shift)) | + ((fld_val & (fld_mask)) << fld_shift);} + if ((ret_code = i2c_smbus_write_byte_data(client, (u8)reg_offset, (u8)reg_val)) != 0) { + /* Handle CPLD write error condition */; + mutex_unlock(&data->lock); + printk("%s: i2c write failed, error code = %d.\n", reg_name, ret_code); + return ret_code; + } + else if (debug_flag) { + printk("%s: offset = %d, width = %d, new value = 0x%x.\n", reg_name, reg_offset, reg_width, reg_val); + } + mutex_unlock(&data->lock); + return count; +} + +/*--------------------special file for debug---------------------- */ +static ssize_t slave_cpld_debug_read(struct device *dev, struct device_attribute *attr, + char *buf){ + + return sprintf(buf, "%d\n", debug_flag); +} + + +static ssize_t slave_cpld_debug_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int temp; + int error; + + error = kstrtoint(buf, 10, &temp); + if (error){ + printk(KERN_INFO "%s: Conversion value = %s failed.\n", __FUNCTION__, buf); + return count; + } + debug_flag = temp; + + if(debug_flag) + printk("%s, debug_flag = %d\n", __FUNCTION__, debug_flag); + + return count; +} +SYSFS_MISC_RW_ATTR_DEF(debug, slave_cpld_debug_read, slave_cpld_debug_write) + + + + +/* ----------------define port group---------------------------- */ +static struct attribute *port17_attributes[] = { + SYSFS_ATTR_PTR(port17_present), /* register: zqsfp28_present_24_17_status */ + SYSFS_ATTR_PTR(port17_rst), /* register: zqsfp28_rst_24_17 */ + SYSFS_ATTR_PTR(port17_modsel), /* register: zqsfp28_modsel_24_17 */ + SYSFS_ATTR_PTR(port17_lpmode), /* register: zqsfp28_lpmode_24_17 */ + SYSFS_ATTR_PTR(port17_irq_status), /* register: zqsfp28_irq_24_17_status */ + SYSFS_ATTR_PTR(port17_irq_msk), /* register: zqsfp28_irq_msk_24_17_status */ + NULL +}; + +static struct attribute *port18_attributes[] = { + SYSFS_ATTR_PTR(port18_present), /* register: zqsfp28_present_24_17_status */ + SYSFS_ATTR_PTR(port18_rst), /* register: zqsfp28_rst_24_17 */ + SYSFS_ATTR_PTR(port18_modsel), /* register: zqsfp28_modsel_24_17 */ + SYSFS_ATTR_PTR(port18_lpmode), /* register: zqsfp28_lpmode_24_17 */ + SYSFS_ATTR_PTR(port18_irq_status), /* register: zqsfp28_irq_24_17_status */ + SYSFS_ATTR_PTR(port18_irq_msk), /* register: zqsfp28_irq_msk_24_17_status */ + NULL +}; + +static struct attribute *port19_attributes[] = { + SYSFS_ATTR_PTR(port19_present), /* register: zqsfp28_present_24_17_status */ + SYSFS_ATTR_PTR(port19_rst), /* register: zqsfp28_rst_24_17 */ + SYSFS_ATTR_PTR(port19_modsel), /* register: zqsfp28_modsel_24_17 */ + SYSFS_ATTR_PTR(port19_lpmode), /* register: zqsfp28_lpmode_24_17 */ + SYSFS_ATTR_PTR(port19_irq_status), /* register: zqsfp28_irq_24_17_status */ + SYSFS_ATTR_PTR(port19_irq_msk), /* register: zqsfp28_irq_msk_24_17_status */ + NULL +}; + +static struct attribute *port20_attributes[] = { + SYSFS_ATTR_PTR(port20_present), /* register: zqsfp28_present_24_17_status */ + SYSFS_ATTR_PTR(port20_rst), /* register: zqsfp28_rst_24_17 */ + SYSFS_ATTR_PTR(port20_modsel), /* register: zqsfp28_modsel_24_17 */ + SYSFS_ATTR_PTR(port20_lpmode), /* register: zqsfp28_lpmode_24_17 */ + SYSFS_ATTR_PTR(port20_irq_status), /* register: zqsfp28_irq_24_17_status */ + SYSFS_ATTR_PTR(port20_irq_msk), /* register: zqsfp28_irq_msk_24_17_status */ + NULL +}; + +static struct attribute *port21_attributes[] = { + SYSFS_ATTR_PTR(port21_present), /* register: zqsfp28_present_24_17_status */ + SYSFS_ATTR_PTR(port21_rst), /* register: zqsfp28_rst_24_17 */ + SYSFS_ATTR_PTR(port21_modsel), /* register: zqsfp28_modsel_24_17 */ + SYSFS_ATTR_PTR(port21_lpmode), /* register: zqsfp28_lpmode_24_17 */ + SYSFS_ATTR_PTR(port21_irq_status), /* register: zqsfp28_irq_24_17_status */ + SYSFS_ATTR_PTR(port21_irq_msk), /* register: zqsfp28_irq_msk_24_17_status */ + NULL +}; + +static struct attribute *port22_attributes[] = { + SYSFS_ATTR_PTR(port22_present), /* register: zqsfp28_present_24_17_status */ + SYSFS_ATTR_PTR(port22_rst), /* register: zqsfp28_rst_24_17 */ + SYSFS_ATTR_PTR(port22_modsel), /* register: zqsfp28_modsel_24_17 */ + SYSFS_ATTR_PTR(port22_lpmode), /* register: zqsfp28_lpmode_24_17 */ + SYSFS_ATTR_PTR(port22_irq_status), /* register: zqsfp28_irq_24_17_status */ + SYSFS_ATTR_PTR(port22_irq_msk), /* register: zqsfp28_irq_msk_24_17_status */ + NULL +}; + +static struct attribute *port23_attributes[] = { + SYSFS_ATTR_PTR(port23_present), /* register: zqsfp28_present_24_17_status */ + SYSFS_ATTR_PTR(port23_rst), /* register: zqsfp28_rst_24_17 */ + SYSFS_ATTR_PTR(port23_modsel), /* register: zqsfp28_modsel_24_17 */ + SYSFS_ATTR_PTR(port23_lpmode), /* register: zqsfp28_lpmode_24_17 */ + SYSFS_ATTR_PTR(port23_irq_status), /* register: zqsfp28_irq_24_17_status */ + SYSFS_ATTR_PTR(port23_irq_msk), /* register: zqsfp28_irq_msk_24_17_status */ + NULL +}; + +static struct attribute *port24_attributes[] = { + SYSFS_ATTR_PTR(port24_present), /* register: zqsfp28_present_24_17_status */ + SYSFS_ATTR_PTR(port24_rst), /* register: zqsfp28_rst_24_17 */ + SYSFS_ATTR_PTR(port24_modsel), /* register: zqsfp28_modsel_24_17 */ + SYSFS_ATTR_PTR(port24_lpmode), /* register: zqsfp28_lpmode_24_17 */ + SYSFS_ATTR_PTR(port24_irq_status), /* register: zqsfp28_irq_24_17_status */ + SYSFS_ATTR_PTR(port24_irq_msk), /* register: zqsfp28_irq_msk_24_17_status */ + NULL +}; + +static struct attribute *port25_attributes[] = { + SYSFS_ATTR_PTR(port25_present), /* register: zqsfp28_present_32_25_status */ + SYSFS_ATTR_PTR(port25_rst), /* register: zqsfp28_rst_32_25 */ + SYSFS_ATTR_PTR(port25_modsel), /* register: zqsfp28_modsel_32_25 */ + SYSFS_ATTR_PTR(port25_lpmode), /* register: zqsfp28_lpmode_32_25 */ + SYSFS_ATTR_PTR(port25_irq_status), /* register: zqsfp28_irq_32_25_status */ + SYSFS_ATTR_PTR(port25_irq_msk), /* register: zqsfp28_irq_msk_32_25_status */ + NULL +}; + +static struct attribute *port26_attributes[] = { + SYSFS_ATTR_PTR(port26_present), /* register: zqsfp28_present_32_25_status */ + SYSFS_ATTR_PTR(port26_rst), /* register: zqsfp28_rst_32_25 */ + SYSFS_ATTR_PTR(port26_modsel), /* register: zqsfp28_modsel_32_25 */ + SYSFS_ATTR_PTR(port26_lpmode), /* register: zqsfp28_lpmode_32_25 */ + SYSFS_ATTR_PTR(port26_irq_status), /* register: zqsfp28_irq_32_25_status */ + SYSFS_ATTR_PTR(port26_irq_msk), /* register: zqsfp28_irq_msk_32_25_status */ + NULL +}; + +static struct attribute *port27_attributes[] = { + SYSFS_ATTR_PTR(port27_present), /* register: zqsfp28_present_32_25_status */ + SYSFS_ATTR_PTR(port27_rst), /* register: zqsfp28_rst_32_25 */ + SYSFS_ATTR_PTR(port27_modsel), /* register: zqsfp28_modsel_32_25 */ + SYSFS_ATTR_PTR(port27_lpmode), /* register: zqsfp28_lpmode_32_25 */ + SYSFS_ATTR_PTR(port27_irq_status), /* register: zqsfp28_irq_32_25_status */ + SYSFS_ATTR_PTR(port27_irq_msk), /* register: zqsfp28_irq_msk_32_25_status */ + NULL +}; + +static struct attribute *port28_attributes[] = { + SYSFS_ATTR_PTR(port28_present), /* register: zqsfp28_present_32_25_status */ + SYSFS_ATTR_PTR(port28_rst), /* register: zqsfp28_rst_32_25 */ + SYSFS_ATTR_PTR(port28_modsel), /* register: zqsfp28_modsel_32_25 */ + SYSFS_ATTR_PTR(port28_lpmode), /* register: zqsfp28_lpmode_32_25 */ + SYSFS_ATTR_PTR(port28_irq_status), /* register: zqsfp28_irq_32_25_status */ + SYSFS_ATTR_PTR(port28_irq_msk), /* register: zqsfp28_irq_msk_32_25_status */ + NULL +}; + +static struct attribute *port29_attributes[] = { + SYSFS_ATTR_PTR(port29_present), /* register: zqsfp28_present_32_25_status */ + SYSFS_ATTR_PTR(port29_rst), /* register: zqsfp28_rst_32_25 */ + SYSFS_ATTR_PTR(port29_modsel), /* register: zqsfp28_modsel_32_25 */ + SYSFS_ATTR_PTR(port29_lpmode), /* register: zqsfp28_lpmode_32_25 */ + SYSFS_ATTR_PTR(port29_irq_status), /* register: zqsfp28_irq_32_25_status */ + SYSFS_ATTR_PTR(port29_irq_msk), /* register: zqsfp28_irq_msk_32_25_status */ + NULL +}; + +static struct attribute *port30_attributes[] = { + SYSFS_ATTR_PTR(port30_present), /* register: zqsfp28_present_32_25_status */ + SYSFS_ATTR_PTR(port30_rst), /* register: zqsfp28_rst_32_25 */ + SYSFS_ATTR_PTR(port30_modsel), /* register: zqsfp28_modsel_32_25 */ + SYSFS_ATTR_PTR(port30_lpmode), /* register: zqsfp28_lpmode_32_25 */ + SYSFS_ATTR_PTR(port30_irq_status), /* register: zqsfp28_irq_32_25_status */ + SYSFS_ATTR_PTR(port30_irq_msk), /* register: zqsfp28_irq_msk_32_25_status */ + NULL +}; + +static struct attribute *port31_attributes[] = { + SYSFS_ATTR_PTR(port31_present), /* register: zqsfp28_present_32_25_status */ + SYSFS_ATTR_PTR(port31_rst), /* register: zqsfp28_rst_32_25 */ + SYSFS_ATTR_PTR(port31_modsel), /* register: zqsfp28_modsel_32_25 */ + SYSFS_ATTR_PTR(port31_lpmode), /* register: zqsfp28_lpmode_32_25 */ + SYSFS_ATTR_PTR(port31_irq_status), /* register: zqsfp28_irq_32_25_status */ + SYSFS_ATTR_PTR(port31_irq_msk), /* register: zqsfp28_irq_msk_32_25_status */ + NULL +}; + +static struct attribute *port32_attributes[] = { + SYSFS_ATTR_PTR(port32_present), /* register: zqsfp28_present_32_25_status */ + SYSFS_ATTR_PTR(port32_rst), /* register: zqsfp28_rst_32_25 */ + SYSFS_ATTR_PTR(port32_modsel), /* register: zqsfp28_modsel_32_25 */ + SYSFS_ATTR_PTR(port32_lpmode), /* register: zqsfp28_lpmode_32_25 */ + SYSFS_ATTR_PTR(port32_irq_status), /* register: zqsfp28_irq_32_25_status */ + SYSFS_ATTR_PTR(port32_irq_msk), /* register: zqsfp28_irq_msk_32_25_status */ + NULL +}; + +static const struct attribute_group slave_cpld_port_group[] = { + {.attrs = port17_attributes, + .name = "port17",}, + {.attrs = port18_attributes, + .name = "port18",}, + {.attrs = port19_attributes, + .name = "port19",}, + {.attrs = port20_attributes, + .name = "port20",}, + {.attrs = port21_attributes, + .name = "port21",}, + {.attrs = port22_attributes, + .name = "port22",}, + {.attrs = port23_attributes, + .name = "port23",}, + {.attrs = port24_attributes, + .name = "port24",}, + {.attrs = port25_attributes, + .name = "port25",}, + {.attrs = port26_attributes, + .name = "port26",}, + {.attrs = port27_attributes, + .name = "port27",}, + {.attrs = port28_attributes, + .name = "port28",}, + {.attrs = port29_attributes, + .name = "port29",}, + {.attrs = port30_attributes, + .name = "port30",}, + {.attrs = port31_attributes, + .name = "port31",}, + {.attrs = port32_attributes, + .name = "port32",} +}; + +/* ----------------define misc group---------------------------- */ +static struct attribute *misc_attributes[] = { + SYSFS_ATTR_PTR(mjr_rev), /* register: slv_cpld_rev */ + SYSFS_ATTR_PTR(mnr_rev), /* register: slv_cpld_rev */ + SYSFS_ATTR_PTR(scrtch_reg), /* register: slv_cpld_gpr */ + SYSFS_ATTR_PTR(brd_rev), /* register: mb_brd_rev_type */ + SYSFS_ATTR_PTR(brd_type), /* register: mb_brd_rev_type */ + + SYSFS_ATTR_PTR(port_17_24_present), /* register: zqsfp28_present_24_17_status */ + SYSFS_ATTR_PTR(port_25_32_present), /* register: zqsfp28_present_32_25_status */ + SYSFS_ATTR_PTR(port_17_24_rst), /* register: zqsfp28_rst_24_17 */ + SYSFS_ATTR_PTR(port_25_32_rst), /* register: zqsfp28_rst_32_25 */ + SYSFS_ATTR_PTR(port_17_24_modsel), /* register: zqsfp28_modsel_24_17 */ + SYSFS_ATTR_PTR(port_25_32_modsel), /* register: zqsfp28_modsel_32_25 */ + SYSFS_ATTR_PTR(port_17_24_irq_status),/* register: zqsfp28_irq_24_17_status */ + SYSFS_ATTR_PTR(port_25_32_irq_status),/* register: zqsfp28_irq_32_25_status */ + SYSFS_ATTR_PTR(port_17_24_irq_msk), /* register: zqsfp28_irq_msk_24_17_status */ + SYSFS_ATTR_PTR(port_25_32_irq_msk), /* register: zqsfp28_irq_msk_32_25_status */ + SYSFS_ATTR_PTR(port_17_24_lpmode), /* register: zqsfp28_lpmode_24_17 */ + SYSFS_ATTR_PTR(port_25_32_lpmode), /* register: zqsfp28_lpmode_32_25 */ + + SYSFS_ATTR_PTR(debug), /* debug flag for print more messages */ + NULL +}; +static const struct attribute_group slave_cpld_group_misc = { + .attrs = misc_attributes, +}; + +static int slave_cpld_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct slave_cpld_data *slave_cpld; + int err, i; + int grp_number = (int)( sizeof(slave_cpld_port_group) / sizeof(slave_cpld_port_group[0])); + + /* allocate memory to slave_cpld */ + slave_cpld = devm_kzalloc(&client->dev, sizeof(struct slave_cpld_data) , GFP_KERNEL); + + if (!slave_cpld) + return -ENOMEM; + + mutex_init(&slave_cpld->lock); + + for(i = 0 ; i < grp_number ; i++){ + err = sysfs_create_group(&client->dev.kobj, &slave_cpld_port_group[i]); + if (err){ + printk("%s: Error creeat port group %d.\n", __FUNCTION__, i+1); + } + } + err = sysfs_create_group(&client->dev.kobj, &slave_cpld_group_misc); + if (err){ + printk("%s: Error creeat misc group.\n", __FUNCTION__); + } + + slave_cpld->client = client; + i2c_set_clientdata(client, slave_cpld); + + printk(KERN_INFO "%s: Slave CPLD LCMXO3LF created.\n", __FUNCTION__); + + return 0; + +} + +static int slave_cpld_remove(struct i2c_client *client) +{ + int i; + int grp_number = (int)( sizeof(slave_cpld_port_group) / sizeof(slave_cpld_port_group[0])); + + for(i = 0 ; i < grp_number ; i++){ + sysfs_remove_group(&client->dev.kobj, &slave_cpld_port_group[i]); + } + sysfs_remove_group(&client->dev.kobj, &slave_cpld_group_misc); + + printk(KERN_INFO "%s: Slave CPLD removed.\n", __FUNCTION__); + return 0; +} + +static struct i2c_driver slave_cpld_driver = { + .driver = { + .name = "slave_cpld", + .owner = THIS_MODULE, + }, + .probe = slave_cpld_probe, + .remove = slave_cpld_remove, + .id_table = slave_cpld_ids, +}; + +static int __init slave_cpld_init(void) +{ + printk(KERN_INFO "%s: init.\n", __FUNCTION__); + return i2c_add_driver(&slave_cpld_driver); +} +module_init(slave_cpld_init); + +static void __exit slave_cpld_exit(void) +{ + printk(KERN_INFO "%s: exit.\n", __FUNCTION__); + i2c_del_driver(&slave_cpld_driver); +} +module_exit(slave_cpld_exit); + +MODULE_DESCRIPTION("mitac_ly1200_32x_slave_cpld driver"); +MODULE_AUTHOR("Eddy Weng "); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_system_cpld.c b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_system_cpld.c new file mode 100644 index 000000000000..e5af8b70bf9a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/mitac_ly1200_32x_system_cpld.c @@ -0,0 +1,541 @@ +#define CONFIG_DRV_SYSCPLD_WDT 1 + +#include +#include + +#include "system_cpld_reg.h" +#include "system_cpld_sysfs.h" +#ifdef CONFIG_DRV_SYSCPLD_WDT +#include +#include +#include +#include +#include +#include +#endif + +static int debug_flag = 0; + +struct system_cpld_data { + struct mutex lock; + + struct i2c_client *client; + struct device_attribute bin; +}; +struct system_cpld_data *system_cpld; + +static const struct i2c_device_id system_cpld_ids[] = { + { "system_cpld", 0 }, + { /* END OF LIST */ } +}; +MODULE_DEVICE_TABLE(i2c, system_cpld_ids); + +static int system_cpld_raw_read(struct device *dev, struct device_attribute *attr, char *buf, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name){ + unsigned int reg_val = 0, fld_val; + static int debug_flag; + struct system_cpld_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + int err; + + if (reg_width != 8){ + printk("%s: Register table width setting failed.\n", reg_name); + return -EINVAL; + } + mutex_lock(&data->lock); + if ((err = i2c_smbus_read_byte_data(client, (u8)reg_offset)) < 0) { + /* CPLD read error condition */; + mutex_unlock(&data->lock); + printk("%s: i2c read failed, error code = %d.\n", reg_name, err); + return err; + } + reg_val = err; + if (debug_flag) { + printk("%s: reg_offset = %d, width = %d, cur value = 0x%x.\n", reg_name, reg_offset, reg_width, reg_val); + } + mutex_unlock(&data->lock); + if (fld_width == reg_width) {fld_val = reg_val & fld_mask;} + else {fld_val = (reg_val >> fld_shift) & fld_mask;} + return sprintf(buf, "0x%x\n", fld_val); +} + +static int system_cpld_raw_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name){ + int ret_code; + unsigned int reg_val, fld_val; + unsigned long val; + static int debug_flag; + struct system_cpld_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->client; + if (reg_width != 8){ + printk("%s: Register table width setting failed.\n", reg_name); + return -EINVAL; + } + /* Parse buf and store to fld_val */ + if ((ret_code = kstrtoul(buf, 16, &val))){ + printk("%s: Conversion value = %s failed, errno = %d.\n", reg_name, buf, ret_code); + return ret_code; + } + fld_val = (unsigned int)val; + mutex_lock(&data->lock); + if ((ret_code = i2c_smbus_read_byte_data(client, (u8)reg_offset)) < 0) { + /* Handle CPLD read error condition */; + mutex_unlock(&data->lock); + printk("%s: i2c read failed, error code = %d.\n", reg_name, ret_code); + return ret_code; + } + reg_val = ret_code; + if (debug_flag) { + printk("%s: offset = %d, width = %d, cur value = 0x%x.\n", reg_name, reg_offset, reg_width, reg_val); + } + if (fld_width == reg_width) {reg_val = fld_val & fld_mask;} + else {reg_val = (reg_val & ~(fld_mask << fld_shift)) | + ((fld_val & (fld_mask)) << fld_shift);} + if ((ret_code = i2c_smbus_write_byte_data(client, (u8)reg_offset, (u8)reg_val)) != 0) { + /* Handle CPLD write error condition */; + mutex_unlock(&data->lock); + printk("%s: i2c write failed, error code = %d.\n", reg_name, ret_code); + return ret_code; + } + else if (debug_flag) { + printk("%s: offset = %d, width = %d, new value = 0x%x.\n", reg_name, reg_offset, reg_width, reg_val); + } + mutex_unlock(&data->lock); + return count; +} + +/*--------------------special file for debug---------------------- */ +static ssize_t system_cpld_debug_read(struct device *dev, struct device_attribute *attr, + char *buf){ + + return sprintf(buf, "%d\n", debug_flag); +} + + +static ssize_t system_cpld_debug_write(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int temp; + int error; + + error = kstrtoint(buf, 10, &temp); + if (error){ + printk(KERN_INFO "%s: Conversion value = %s failed.\n", __FUNCTION__, buf); + return count; + } + debug_flag = temp; + + if(debug_flag) + printk("%s, debug_flag = %d\n", __FUNCTION__, debug_flag); + + return count; +} +SYSFS_MISC_RW_ATTR_DEF(debug, system_cpld_debug_read, system_cpld_debug_write) + + +/* ----------------define misc group---------------------------- */ +static struct attribute *misc_attributes[] = { + SYSFS_ATTR_PTR(mjr_rev), /* register: sys_cpld_rev */ + SYSFS_ATTR_PTR(mnr_rev), /* register: sys_cpld_rev */ + + SYSFS_ATTR_PTR(scrtch_reg), /* register: sys_cpld_gpr */ + + SYSFS_ATTR_PTR(brd_rev), /* register: cpu_brd_rev_type */ + SYSFS_ATTR_PTR(brd_type), /* register: cpu_brd_rev_type */ + + SYSFS_ATTR_PTR(ssd_present), /* register: sys_srr */ + SYSFS_ATTR_PTR(spi_cs_sel), /* register: sys_srr */ + SYSFS_ATTR_PTR(rst_bios_switch), /* register: sys_srr */ + SYSFS_ATTR_PTR(cpld_upgrade_rst), /* register: sys_srr */ + + SYSFS_ATTR_PTR(cpld_spi_wp), /* register: sys_eeprom_wp */ + SYSFS_ATTR_PTR(system_id_eeprom_wp), /* register: sys_eeprom_wp */ + SYSFS_ATTR_PTR(spi_me_wp), /* register: sys_eeprom_wp */ + SYSFS_ATTR_PTR(spi_bios_wp), /* register: sys_eeprom_wp */ + SYSFS_ATTR_PTR(spi_bak_bios_wp), /* register: sys_eeprom_wp */ + + SYSFS_ATTR_PTR(vrhot_irq_en), /* register: sys_irq */ + SYSFS_ATTR_PTR(cpu_thermtrip_irq_en), /* register: sys_irq */ + SYSFS_ATTR_PTR(temp_alert_irq_en), /* register: sys_irq */ + SYSFS_ATTR_PTR(vrhot_irq), /* register: sys_irq */ + SYSFS_ATTR_PTR(cpu_thermtrip_irq), /* register: sys_irq */ + SYSFS_ATTR_PTR(temp_alert_irq), /* register: sys_irq */ + + SYSFS_ATTR_PTR(wd_timer), /* register: sys_wd */ + SYSFS_ATTR_PTR(wd_en), /* register: sys_wd */ + SYSFS_ATTR_PTR(wd_punch), /* register: sys_wd */ + + SYSFS_ATTR_PTR(mb_rst_en), /* register: sys_mb_rst_en */ + + SYSFS_ATTR_PTR(pwr_v3p3_en), /* register: cpu_pwr_en_status */ + SYSFS_ATTR_PTR(pwr_vcc_vnn_en), /* register: cpu_pwr_en_status */ + SYSFS_ATTR_PTR(pwr_vccsram_en), /* register: cpu_pwr_en_status */ + SYSFS_ATTR_PTR(pwr_vddq_en), /* register: cpu_pwr_en_status */ + SYSFS_ATTR_PTR(pwr_vcc_ref_en), /* register: cpu_pwr_en_status */ + SYSFS_ATTR_PTR(pwr_v1p05_en), /* register: cpu_pwr_en_status */ + SYSFS_ATTR_PTR(pwr_v1p8_en), /* register: cpu_pwr_en_status */ + SYSFS_ATTR_PTR(pwr_v2p5_en), /* register: cpu_pwr_en_status */ + + SYSFS_ATTR_PTR(pg_v3p3), /* register: cpu_pwr_status */ + SYSFS_ATTR_PTR(pg_vcc_vnn), /* register: cpu_pwr_status */ + SYSFS_ATTR_PTR(pg_vccsram), /* register: cpu_pwr_status */ + SYSFS_ATTR_PTR(pg_vddq), /* register: cpu_pwr_status */ + SYSFS_ATTR_PTR(pg_vcc_ref), /* register: cpu_pwr_status */ + SYSFS_ATTR_PTR(pg_v1p05), /* register: cpu_pwr_status */ + SYSFS_ATTR_PTR(pg_v1p8), /* register: cpu_pwr_status */ + SYSFS_ATTR_PTR(pg_v2p5), /* register: cpu_pwr_status */ + + SYSFS_ATTR_PTR(debug), /* debug flag for print more messages */ + NULL +}; +static const struct attribute_group system_cpld_group_misc = { + .attrs = misc_attributes, +}; + +#ifdef CONFIG_DRV_SYSCPLD_WDT +/* + ***************************************************************************** + * + * Watchdog Driver + * + ***************************************************************************** + */ +/* wdt_timeout[] are defined by CPLD spec , -1 means researved + 300 sec is not supported */ +int wdt_timeout[]={15,30,60,90,120,180,240,300,-1,-1,-1,-1,-1,-1,-1,-1}; +#define WD_TIMO_MAX_NUM 16 +/* Default margin */ +#define WD_TIMO 30 + +static int wdt_margin = WD_TIMO; +module_param(wdt_margin, int, 0); +MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default " + __MODULE_STRING(WD_TIMO) "s)"); + +static unsigned long wdt_is_open; +static int boot_flag; + +/** + * wdt_ping: + * + * Reload counter one with the watchdog timeout. We don't bother reloading + * the cascade counter. + */ +static void wdt_ping(void) +{ + struct device *dev = &system_cpld->client->dev; + struct device_attribute *fake_attr=NULL; + char *buf="0";/* 0: punch is defined by CPLD spec */ + int err; + err = system_cpld_wd_punch_raw_write(dev, fake_attr, buf, (size_t)0); + if(err < 0){ + system_cpld_wd_punch_raw_write(dev, fake_attr, buf, (size_t)0); + } +} + +/** + * wdt_disable: + * + * disables watchdog. + */ +static void wdt_disable(void) +{ + struct device *dev = &system_cpld->client->dev; + struct device_attribute *fake_attr=NULL; + char *buf="0";/* 0: disable is defined by CPLD spec */ + int err; + err = system_cpld_wd_en_raw_write(dev, fake_attr, buf, (size_t)0); + if(err < 0){ + system_cpld_wd_en_raw_write(dev, fake_attr, buf, (size_t)0); + } +} + +/** + * wdt_enable: + * + * enables watchdog. + */ +static void wdt_enable(void) +{ + struct device *dev = &system_cpld->client->dev; + struct device_attribute *fake_attr=NULL; + char *buf="1";/* 1: enable is defined by CPLD spec */ + int err; + err = system_cpld_wd_en_raw_write(dev, fake_attr, buf, (size_t)0); + if(err < 0){ + system_cpld_wd_en_raw_write(dev, fake_attr, buf, (size_t)0); + } +} + +/** + * wdt_set_timeout: + * + * set watchdog timeout. + */ +static void wdt_set_timeout(int index) +{ + struct device *dev = &system_cpld->client->dev; + struct device_attribute *fake_attr=NULL; + char buf[1]; + if ( WD_TIMO_MAX_NUM == 16 ) { + sprintf(buf,"%x",index); + system_cpld_wd_timer_raw_write(dev, fake_attr, buf, (size_t)0); + } + else + printk(KERN_INFO "%s: It is out of spec.\n", __FUNCTION__); +} + +/** + * wdt_write: + * @file: file handle to the watchdog + * @buf: buffer to write (unused as data does not matter here + * @count: count of bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ +static ssize_t wdt_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + if (count) { + wdt_ping(); + return 1; + } + return 0; +} + +/** + * wdt_ioctl: + * @inode: inode of the device + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. We only actually usefully support + * querying capabilities and current status. + */ +static int wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int new_margin, rv, i; + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT, + .firmware_version = 1, + .identity = "SYS_CPLD WTD" + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user((struct watchdog_info __user *)arg, &ident, + sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(boot_flag, (int __user *)arg); + case WDIOC_KEEPALIVE: + wdt_ping(); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, (int __user *)arg)) + return -EFAULT; + /* Arbitrary, can't find the card's limits */ + if (new_margin <= 1) + return -EINVAL; + for( i=0; i= WD_TIMO_MAX_NUM || i < 0 ) + return -EINVAL; + wdt_set_timeout(i); + case WDIOC_GETTIMEOUT: + return put_user(wdt_margin, (int __user *)arg); + + case WDIOC_SETOPTIONS: + if (copy_from_user(&rv, (int __user *)arg, sizeof(int))) + return -EFAULT; + + if (rv & WDIOS_DISABLECARD) { + pr_info("System CPLD: disable watchdog\n"); + wdt_disable(); + } + + if (rv & WDIOS_ENABLECARD) { + pr_info("System CPLD: enable watchdog\n"); + wdt_enable(); + } + return -EINVAL; + } + return -ENOTTY; +} + +static long wdt_unlocked_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + int ret; + + ret = wdt_ioctl(file, cmd, arg); + + return ret; +} + +/** + * wdt_open: + * @inode: inode of device + * @file: file handle to device + * + */ +static int wdt_open(struct inode *inode, struct file *file) +{ + if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) { + if (test_and_set_bit(0, &wdt_is_open)) { + return -EBUSY; + } + /* + * Activate + */ + + wdt_enable(); + return nonseekable_open(inode, file); + } + return -ENODEV; +} + +/** + * wdt_close: + * @inode: inode to board + * @file: file handle to board + * + */ +static int wdt_release(struct inode *inode, struct file *file) +{ + if (MINOR(inode->i_rdev) == WATCHDOG_MINOR) + clear_bit(0, &wdt_is_open); + return 0; +} + +/** + * notify_sys: + * @this: our notifier block + * @code: the event being reported + * @unused: unused + * + * Our notifier is called on system shutdowns. We want to turn the card + * off at reboot otherwise the machine will reboot again during memory + * test or worse yet during the following fsck. This would suck, in fact + * trust me - if it happens it does suck. + */ +static int wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + /* Disable Watchdog */ + wdt_disable(); + return NOTIFY_DONE; +} + +static const struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdt_write, + .unlocked_ioctl = wdt_unlocked_ioctl, + .open = wdt_open, + .release = wdt_release, +}; + +static struct miscdevice wdt_dev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * The WDT card needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; +#endif /* CONFIG_DRV_SYSCPLD_WDT */ + +static int system_cpld_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + int err; + + /* allocate memory to system_cpld */ + system_cpld = devm_kzalloc(&client->dev, sizeof(struct system_cpld_data) , GFP_KERNEL); + + if (!system_cpld) + return -ENOMEM; + + mutex_init(&system_cpld->lock); + + err = sysfs_create_group(&client->dev.kobj, &system_cpld_group_misc); + if (err){ + printk("%s: Error creeat misc group.\n", __FUNCTION__); + } + + system_cpld->client = client; + i2c_set_clientdata(client, system_cpld); + + printk(KERN_INFO "%s: System CPLD LCMXO3LF created.\n", __FUNCTION__); + +#ifdef CONFIG_DRV_SYSCPLD_WDT + err = misc_register(&wdt_dev); + if (err) + return err; + err = register_reboot_notifier(&wdt_notifier); + if (err) { + misc_deregister(&wdt_dev); + return err; + } + printk(KERN_INFO "%s: System CPLD watchdog created.\n", __FUNCTION__); +#endif + + return 0; + +} + +static int system_cpld_remove(struct i2c_client *client) +{ +#ifdef CONFIG_DRV_SYSCPLD_WDT + misc_deregister(&wdt_dev); + unregister_reboot_notifier(&wdt_notifier); +#endif + sysfs_remove_group(&client->dev.kobj, &system_cpld_group_misc); + + printk(KERN_INFO "%s: System CPLD removed.\n", __FUNCTION__); + return 0; +} + +static struct i2c_driver system_cpld_driver = { + .driver = { + .name = "system_cpld", + .owner = THIS_MODULE, + }, + .probe = system_cpld_probe, + .remove = system_cpld_remove, + .id_table = system_cpld_ids, +}; + +static int __init system_cpld_init(void) +{ + printk(KERN_INFO "%s: init.\n", __FUNCTION__); + return i2c_add_driver(&system_cpld_driver); +} +module_init(system_cpld_init); + +static void __exit system_cpld_exit(void) +{ + printk(KERN_INFO "%s: exit.\n", __FUNCTION__); + i2c_del_driver(&system_cpld_driver); +} +module_exit(system_cpld_exit); + +MODULE_DESCRIPTION("mitac_ly1200_32x_system_cpld driver"); +MODULE_AUTHOR("Eddy Weng "); +MODULE_LICENSE("GPL"); + diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/pmbus.h b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/pmbus.h new file mode 100644 index 000000000000..55cb8663e6e9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/pmbus.h @@ -0,0 +1,366 @@ +#ifndef PMBUS_H +#define PMBUS_H + +/* + * Registers + */ +#define PMBUS_PAGE 0x00 +#define PMBUS_OPERATION 0x01 +#define PMBUS_ON_OFF_CONFIG 0x02 +#define PMBUS_CLEAR_FAULTS 0x03 +#define PMBUS_PHASE 0x04 + +#define PMBUS_CAPABILITY 0x19 +#define PMBUS_QUERY 0x1A + +#define PMBUS_VOUT_MODE 0x20 +#define PMBUS_VOUT_COMMAND 0x21 +#define PMBUS_VOUT_TRIM 0x22 +#define PMBUS_VOUT_CAL_OFFSET 0x23 +#define PMBUS_VOUT_MAX 0x24 +#define PMBUS_VOUT_MARGIN_HIGH 0x25 +#define PMBUS_VOUT_MARGIN_LOW 0x26 +#define PMBUS_VOUT_TRANSITION_RATE 0x27 +#define PMBUS_VOUT_DROOP 0x28 +#define PMBUS_VOUT_SCALE_LOOP 0x29 +#define PMBUS_VOUT_SCALE_MONITOR 0x2A + +#define PMBUS_COEFFICIENTS 0x30 +#define PMBUS_POUT_MAX 0x31 + +#define PMBUS_FAN_CONFIG_12 0x3A +#define PMBUS_FAN_COMMAND_1 0x3B +#define PMBUS_FAN_COMMAND_2 0x3C +#define PMBUS_FAN_CONFIG_34 0x3D +#define PMBUS_FAN_COMMAND_3 0x3E +#define PMBUS_FAN_COMMAND_4 0x3F + +#define PMBUS_VOUT_OV_FAULT_LIMIT 0x40 +#define PMBUS_VOUT_OV_FAULT_RESPONSE 0x41 +#define PMBUS_VOUT_OV_WARN_LIMIT 0x42 +#define PMBUS_VOUT_UV_WARN_LIMIT 0x43 +#define PMBUS_VOUT_UV_FAULT_LIMIT 0x44 +#define PMBUS_VOUT_UV_FAULT_RESPONSE 0x45 +#define PMBUS_IOUT_OC_FAULT_LIMIT 0x46 +#define PMBUS_IOUT_OC_FAULT_RESPONSE 0x47 +#define PMBUS_IOUT_OC_LV_FAULT_LIMIT 0x48 +#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE 0x49 +#define PMBUS_IOUT_OC_WARN_LIMIT 0x4A +#define PMBUS_IOUT_UC_FAULT_LIMIT 0x4B +#define PMBUS_IOUT_UC_FAULT_RESPONSE 0x4C + +#define PMBUS_OT_FAULT_LIMIT 0x4F +#define PMBUS_OT_FAULT_RESPONSE 0x50 +#define PMBUS_OT_WARN_LIMIT 0x51 +#define PMBUS_UT_WARN_LIMIT 0x52 +#define PMBUS_UT_FAULT_LIMIT 0x53 +#define PMBUS_UT_FAULT_RESPONSE 0x54 +#define PMBUS_VIN_OV_FAULT_LIMIT 0x55 +#define PMBUS_VIN_OV_FAULT_RESPONSE 0x56 +#define PMBUS_VIN_OV_WARN_LIMIT 0x57 +#define PMBUS_VIN_UV_WARN_LIMIT 0x58 +#define PMBUS_VIN_UV_FAULT_LIMIT 0x59 + +#define PMBUS_IIN_OC_FAULT_LIMIT 0x5B +#define PMBUS_IIN_OC_WARN_LIMIT 0x5D + +#define PMBUS_POUT_OP_FAULT_LIMIT 0x68 +#define PMBUS_POUT_OP_WARN_LIMIT 0x6A +#define PMBUS_PIN_OP_WARN_LIMIT 0x6B + +#define PMBUS_STATUS_BYTE 0x78 +#define PMBUS_STATUS_WORD 0x79 +#define PMBUS_STATUS_VOUT 0x7A +#define PMBUS_STATUS_IOUT 0x7B +#define PMBUS_STATUS_INPUT 0x7C +#define PMBUS_STATUS_TEMPERATURE 0x7D +#define PMBUS_STATUS_CML 0x7E +#define PMBUS_STATUS_OTHER 0x7F +#define PMBUS_STATUS_MFR_SPECIFIC 0x80 +#define PMBUS_STATUS_FAN_12 0x81 +#define PMBUS_STATUS_FAN_34 0x82 + +#define PMBUS_READ_VIN 0x88 +#define PMBUS_READ_IIN 0x89 +#define PMBUS_READ_VCAP 0x8A +#define PMBUS_READ_VOUT 0x8B +#define PMBUS_READ_IOUT 0x8C +#define PMBUS_READ_TEMPERATURE_1 0x8D +#define PMBUS_READ_TEMPERATURE_2 0x8E +#define PMBUS_READ_TEMPERATURE_3 0x8F +#define PMBUS_READ_FAN_SPEED_1 0x90 +#define PMBUS_READ_FAN_SPEED_2 0x91 +#define PMBUS_READ_FAN_SPEED_3 0x92 +#define PMBUS_READ_FAN_SPEED_4 0x93 +#define PMBUS_READ_DUTY_CYCLE 0x94 +#define PMBUS_READ_FREQUENCY 0x95 +#define PMBUS_READ_POUT 0x96 +#define PMBUS_READ_PIN 0x97 + +#define PMBUS_REVISION 0x98 +#define PMBUS_MFR_ID 0x99 +#define PMBUS_MFR_MODEL 0x9A +#define PMBUS_MFR_REVISION 0x9B +#define PMBUS_MFR_LOCATION 0x9C +#define PMBUS_MFR_DATE 0x9D +#define PMBUS_MFR_SERIAL 0x9E + +/* + * Virtual registers. + * Useful to support attributes which are not supported by standard PMBus + * registers but exist as manufacturer specific registers on individual chips. + * Must be mapped to real registers in device specific code. + * + * Semantics: + * Virtual registers are all word size. + * READ registers are read-only; writes are either ignored or return an error. + * RESET registers are read/write. Reading reset registers returns zero + * (used for detection), writing any value causes the associated history to be + * reset. + * Virtual registers have to be handled in device specific driver code. Chip + * driver code returns non-negative register values if a virtual register is + * supported, or a negative error code if not. The chip driver may return + * -ENODATA or any other error code in this case, though an error code other + * than -ENODATA is handled more efficiently and thus preferred. Either case, + * the calling PMBus core code will abort if the chip driver returns an error + * code when reading or writing virtual registers. + */ +#define PMBUS_VIRT_BASE 0x100 +#define PMBUS_VIRT_READ_TEMP_AVG (PMBUS_VIRT_BASE + 0) +#define PMBUS_VIRT_READ_TEMP_MIN (PMBUS_VIRT_BASE + 1) +#define PMBUS_VIRT_READ_TEMP_MAX (PMBUS_VIRT_BASE + 2) +#define PMBUS_VIRT_RESET_TEMP_HISTORY (PMBUS_VIRT_BASE + 3) +#define PMBUS_VIRT_READ_VIN_AVG (PMBUS_VIRT_BASE + 4) +#define PMBUS_VIRT_READ_VIN_MIN (PMBUS_VIRT_BASE + 5) +#define PMBUS_VIRT_READ_VIN_MAX (PMBUS_VIRT_BASE + 6) +#define PMBUS_VIRT_RESET_VIN_HISTORY (PMBUS_VIRT_BASE + 7) +#define PMBUS_VIRT_READ_IIN_AVG (PMBUS_VIRT_BASE + 8) +#define PMBUS_VIRT_READ_IIN_MIN (PMBUS_VIRT_BASE + 9) +#define PMBUS_VIRT_READ_IIN_MAX (PMBUS_VIRT_BASE + 10) +#define PMBUS_VIRT_RESET_IIN_HISTORY (PMBUS_VIRT_BASE + 11) +#define PMBUS_VIRT_READ_PIN_AVG (PMBUS_VIRT_BASE + 12) +#define PMBUS_VIRT_READ_PIN_MAX (PMBUS_VIRT_BASE + 13) +#define PMBUS_VIRT_RESET_PIN_HISTORY (PMBUS_VIRT_BASE + 14) +#define PMBUS_VIRT_READ_POUT_AVG (PMBUS_VIRT_BASE + 15) +#define PMBUS_VIRT_READ_POUT_MAX (PMBUS_VIRT_BASE + 16) +#define PMBUS_VIRT_RESET_POUT_HISTORY (PMBUS_VIRT_BASE + 17) +#define PMBUS_VIRT_READ_VOUT_AVG (PMBUS_VIRT_BASE + 18) +#define PMBUS_VIRT_READ_VOUT_MIN (PMBUS_VIRT_BASE + 19) +#define PMBUS_VIRT_READ_VOUT_MAX (PMBUS_VIRT_BASE + 20) +#define PMBUS_VIRT_RESET_VOUT_HISTORY (PMBUS_VIRT_BASE + 21) +#define PMBUS_VIRT_READ_IOUT_AVG (PMBUS_VIRT_BASE + 22) +#define PMBUS_VIRT_READ_IOUT_MIN (PMBUS_VIRT_BASE + 23) +#define PMBUS_VIRT_READ_IOUT_MAX (PMBUS_VIRT_BASE + 24) +#define PMBUS_VIRT_RESET_IOUT_HISTORY (PMBUS_VIRT_BASE + 25) +#define PMBUS_VIRT_READ_TEMP2_AVG (PMBUS_VIRT_BASE + 26) +#define PMBUS_VIRT_READ_TEMP2_MIN (PMBUS_VIRT_BASE + 27) +#define PMBUS_VIRT_READ_TEMP2_MAX (PMBUS_VIRT_BASE + 28) +#define PMBUS_VIRT_RESET_TEMP2_HISTORY (PMBUS_VIRT_BASE + 29) + +#define PMBUS_VIRT_READ_VMON (PMBUS_VIRT_BASE + 30) +#define PMBUS_VIRT_VMON_UV_WARN_LIMIT (PMBUS_VIRT_BASE + 31) +#define PMBUS_VIRT_VMON_OV_WARN_LIMIT (PMBUS_VIRT_BASE + 32) +#define PMBUS_VIRT_VMON_UV_FAULT_LIMIT (PMBUS_VIRT_BASE + 33) +#define PMBUS_VIRT_VMON_OV_FAULT_LIMIT (PMBUS_VIRT_BASE + 34) +#define PMBUS_VIRT_STATUS_VMON (PMBUS_VIRT_BASE + 35) + +/* + * CAPABILITY + */ +#define PB_CAPABILITY_SMBALERT (1<<4) +#define PB_CAPABILITY_ERROR_CHECK (1<<7) + +/* + * VOUT_MODE + */ +#define PB_VOUT_MODE_MODE_MASK 0xe0 +#define PB_VOUT_MODE_PARAM_MASK 0x1f + +#define PB_VOUT_MODE_LINEAR 0x00 +#define PB_VOUT_MODE_VID 0x20 +#define PB_VOUT_MODE_DIRECT 0x40 + +/* + * Fan configuration + */ +#define PB_FAN_2_PULSE_MASK ((1 << 0) | (1 << 1)) +#define PB_FAN_2_RPM (1 << 2) +#define PB_FAN_2_INSTALLED (1 << 3) +#define PB_FAN_1_PULSE_MASK ((1 << 4) | (1 << 5)) +#define PB_FAN_1_RPM (1 << 6) +#define PB_FAN_1_INSTALLED (1 << 7) + +/* + * STATUS_BYTE, STATUS_WORD (lower) + */ +#define PB_STATUS_NONE_ABOVE (1<<0) +#define PB_STATUS_CML (1<<1) +#define PB_STATUS_TEMPERATURE (1<<2) +#define PB_STATUS_VIN_UV (1<<3) +#define PB_STATUS_IOUT_OC (1<<4) +#define PB_STATUS_VOUT_OV (1<<5) +#define PB_STATUS_OFF (1<<6) +#define PB_STATUS_BUSY (1<<7) + +/* + * STATUS_WORD (upper) + */ +#define PB_STATUS_UNKNOWN (1<<8) +#define PB_STATUS_OTHER (1<<9) +#define PB_STATUS_FANS (1<<10) +#define PB_STATUS_POWER_GOOD_N (1<<11) +#define PB_STATUS_WORD_MFR (1<<12) +#define PB_STATUS_INPUT (1<<13) +#define PB_STATUS_IOUT_POUT (1<<14) +#define PB_STATUS_VOUT (1<<15) + +/* + * STATUS_IOUT + */ +#define PB_POUT_OP_WARNING (1<<0) +#define PB_POUT_OP_FAULT (1<<1) +#define PB_POWER_LIMITING (1<<2) +#define PB_CURRENT_SHARE_FAULT (1<<3) +#define PB_IOUT_UC_FAULT (1<<4) +#define PB_IOUT_OC_WARNING (1<<5) +#define PB_IOUT_OC_LV_FAULT (1<<6) +#define PB_IOUT_OC_FAULT (1<<7) + +/* + * STATUS_VOUT, STATUS_INPUT + */ +#define PB_VOLTAGE_UV_FAULT (1<<4) +#define PB_VOLTAGE_UV_WARNING (1<<5) +#define PB_VOLTAGE_OV_WARNING (1<<6) +#define PB_VOLTAGE_OV_FAULT (1<<7) + +/* + * STATUS_INPUT + */ +#define PB_PIN_OP_WARNING (1<<0) +#define PB_IIN_OC_WARNING (1<<1) +#define PB_IIN_OC_FAULT (1<<2) + +/* + * STATUS_TEMPERATURE + */ +#define PB_TEMP_UT_FAULT (1<<4) +#define PB_TEMP_UT_WARNING (1<<5) +#define PB_TEMP_OT_WARNING (1<<6) +#define PB_TEMP_OT_FAULT (1<<7) + +/* + * STATUS_FAN + */ +#define PB_FAN_AIRFLOW_WARNING (1<<0) +#define PB_FAN_AIRFLOW_FAULT (1<<1) +#define PB_FAN_FAN2_SPEED_OVERRIDE (1<<2) +#define PB_FAN_FAN1_SPEED_OVERRIDE (1<<3) +#define PB_FAN_FAN2_WARNING (1<<4) +#define PB_FAN_FAN1_WARNING (1<<5) +#define PB_FAN_FAN2_FAULT (1<<6) +#define PB_FAN_FAN1_FAULT (1<<7) + +/* + * CML_FAULT_STATUS + */ +#define PB_CML_FAULT_OTHER_MEM_LOGIC (1<<0) +#define PB_CML_FAULT_OTHER_COMM (1<<1) +#define PB_CML_FAULT_PROCESSOR (1<<3) +#define PB_CML_FAULT_MEMORY (1<<4) +#define PB_CML_FAULT_PACKET_ERROR (1<<5) +#define PB_CML_FAULT_INVALID_DATA (1<<6) +#define PB_CML_FAULT_INVALID_COMMAND (1<<7) + +enum pmbus_sensor_classes { + PSC_VOLTAGE_IN = 0, + PSC_VOLTAGE_OUT, + PSC_CURRENT_IN, + PSC_CURRENT_OUT, + PSC_POWER, + PSC_TEMPERATURE, + PSC_FAN, + PSC_NUM_CLASSES /* Number of power sensor classes */ +}; + +#define PMBUS_PAGES 32 /* Per PMBus specification */ + +/* Functionality bit mask */ +#define PMBUS_HAVE_VIN (1 << 0) +#define PMBUS_HAVE_VCAP (1 << 1) +#define PMBUS_HAVE_VOUT (1 << 2) +#define PMBUS_HAVE_IIN (1 << 3) +#define PMBUS_HAVE_IOUT (1 << 4) +#define PMBUS_HAVE_PIN (1 << 5) +#define PMBUS_HAVE_POUT (1 << 6) +#define PMBUS_HAVE_FAN12 (1 << 7) +#define PMBUS_HAVE_FAN34 (1 << 8) +#define PMBUS_HAVE_TEMP (1 << 9) +#define PMBUS_HAVE_TEMP2 (1 << 10) +#define PMBUS_HAVE_TEMP3 (1 << 11) +#define PMBUS_HAVE_STATUS_VOUT (1 << 12) +#define PMBUS_HAVE_STATUS_IOUT (1 << 13) +#define PMBUS_HAVE_STATUS_INPUT (1 << 14) +#define PMBUS_HAVE_STATUS_TEMP (1 << 15) +#define PMBUS_HAVE_STATUS_FAN12 (1 << 16) +#define PMBUS_HAVE_STATUS_FAN34 (1 << 17) +#define PMBUS_HAVE_VMON (1 << 18) +#define PMBUS_HAVE_STATUS_VMON (1 << 19) + +enum pmbus_data_format { linear = 0, direct, vid }; + +struct pmbus_driver_info { + int pages; /* Total number of pages */ + enum pmbus_data_format format[PSC_NUM_CLASSES]; + /* + * Support one set of coefficients for each sensor type + * Used for chips providing data in direct mode. + */ + int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */ + int b[PSC_NUM_CLASSES]; /* offset */ + int R[PSC_NUM_CLASSES]; /* exponent */ + + u32 func[PMBUS_PAGES]; /* Functionality, per page */ + /* + * The following functions map manufacturing specific register values + * to PMBus standard register values. Specify only if mapping is + * necessary. + * Functions return the register value (read) or zero (write) if + * successful. A return value of -ENODATA indicates that there is no + * manufacturer specific register, but that a standard PMBus register + * may exist. Any other negative return value indicates that the + * register does not exist, and that no attempt should be made to read + * the standard register. + */ + int (*read_byte_data)(struct i2c_client *client, int page, int reg); + int (*read_word_data)(struct i2c_client *client, int page, int reg); + int (*write_word_data)(struct i2c_client *client, int page, int reg, + u16 word); + int (*write_byte)(struct i2c_client *client, int page, u8 value); + /* + * The identify function determines supported PMBus functionality. + * This function is only necessary if a chip driver supports multiple + * chips, and the chip functionality is not pre-determined. + */ + int (*identify)(struct i2c_client *client, + struct pmbus_driver_info *info); +}; + +/* Function declarations */ + +void pmbus_clear_cache(struct i2c_client *client); +int pmbus_set_page(struct i2c_client *client, u8 page); +int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); +int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word); +int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg); +int pmbus_write_byte(struct i2c_client *client, int page, u8 value); +void pmbus_clear_faults(struct i2c_client *client); +bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); +bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); +int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info); +int pmbus_do_remove(struct i2c_client *client); +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client + *client); + +#endif /* PMBUS_H */ diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/slave_cpld_reg.h b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/slave_cpld_reg.h new file mode 100644 index 000000000000..a8169bdb88ee --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/slave_cpld_reg.h @@ -0,0 +1,192 @@ +#ifndef __SLAVE_CPLD_REG +#define __SLAVE_CPLD_REG + +static int slave_cpld_raw_read(struct device *dev, struct device_attribute *attr, char *buf, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name); +static int slave_cpld_raw_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name); + +/* generic CPLD read function */ +#define FLD_RAW_RD_FUNC(_reg, _fld, _wdh) static ssize_t \ +slave_cpld_##_fld##_raw_read(struct device *dev, struct device_attribute *attr, char *buf) { \ + return slave_cpld_raw_read(dev, attr, buf, _reg##_offset, _reg##_width, _fld##_shift, _fld##_width, _fld##_mask, #_reg); \ +} + +/* generic CPLD write function */ +#define FLD_RAW_WR_FUNC(_reg, _fld, _wdh) static ssize_t \ +slave_cpld_##_fld##_raw_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { \ + return slave_cpld_raw_write(dev, attr, buf, count, _reg##_offset, _reg##_width, _fld##_shift, _fld##_width, _fld##_mask, #_reg); \ +} + +/* CPLD register definition macros */ +#define REG_DEF(_reg, _off, _wdh) \ +static unsigned int _reg##_offset = (unsigned int)(_off); \ +static unsigned int _reg##_width = (unsigned int)(_wdh); + +/* CPLD register field definition macros, with generic read/write function */ +#define FLD_RAW_RO_DEF(_reg, _fld, _sft, _wdh) \ +static unsigned int _fld##_shift = (unsigned int)(_sft); \ +static unsigned int _fld##_width = (unsigned int)(_wdh); \ +static unsigned int _fld##_mask = ((((unsigned int)1) << (_wdh)) - 1); \ +FLD_RAW_RD_FUNC(_reg, _fld, _wdh) + +#define FLD_RAW_RW_DEF(_reg, _fld, _sft, _wdh) \ +static unsigned int _fld##_shift = (unsigned int)(_sft); \ +static unsigned int _fld##_width = (unsigned int)(_wdh); \ +static unsigned int _fld##_mask = ((((unsigned int)1) << (_wdh)) - 1); \ +FLD_RAW_RD_FUNC(_reg, _fld, _wdh) FLD_RAW_WR_FUNC(_reg, _fld, _wdh) + +/* declare slave CPLD registers */ +/* register name offset width */ +/* --------------------------------------- ------- ----- */ +REG_DEF( slv_cpld_rev, 0x00, 8) +REG_DEF( slv_cpld_gpr, 0x01, 8) +REG_DEF( mb_brd_rev_type, 0x02, 8) + +REG_DEF( zqsfp28_present_24_17_status, 0x10, 8) +REG_DEF( zqsfp28_present_32_25_status, 0x11, 8) +REG_DEF( zqsfp28_rst_24_17, 0x12, 8) +REG_DEF( zqsfp28_rst_32_25, 0x13, 8) +REG_DEF( zqsfp28_modsel_24_17, 0x14, 8) +REG_DEF( zqsfp28_modsel_32_25, 0x15, 8) +REG_DEF( zqsfp28_lpmode_24_17, 0x16, 8) +REG_DEF( zqsfp28_lpmode_32_25, 0x17, 8) +REG_DEF( zqsfp28_irq_24_17_status, 0x18, 8) +REG_DEF( zqsfp28_irq_32_25_status, 0x19, 8) +REG_DEF( zqsfp28_irq_msk_24_17_status, 0x1A, 8) +REG_DEF( zqsfp28_irq_msk_32_25_status, 0x1B, 8) + + +/* declare slave CPLD register's fields */ +/* register name field name shift width */ +/* ---------------------- ---------------- ------ ----- */ +FLD_RAW_RO_DEF( slv_cpld_rev, mjr_rev, 4, 4) +FLD_RAW_RO_DEF( slv_cpld_rev, mnr_rev, 0, 4) + +FLD_RAW_RW_DEF( slv_cpld_gpr, scrtch_reg, 0, 8) + +FLD_RAW_RO_DEF( mb_brd_rev_type, brd_rev, 4, 4) +FLD_RAW_RO_DEF( mb_brd_rev_type, brd_type, 0, 4) + +FLD_RAW_RO_DEF( zqsfp28_present_24_17_status, port24_present, 7, 1) +FLD_RAW_RO_DEF( zqsfp28_present_24_17_status, port23_present, 6, 1) +FLD_RAW_RO_DEF( zqsfp28_present_24_17_status, port22_present, 5, 1) +FLD_RAW_RO_DEF( zqsfp28_present_24_17_status, port21_present, 4, 1) +FLD_RAW_RO_DEF( zqsfp28_present_24_17_status, port20_present, 3, 1) +FLD_RAW_RO_DEF( zqsfp28_present_24_17_status, port19_present, 2, 1) +FLD_RAW_RO_DEF( zqsfp28_present_24_17_status, port18_present, 1, 1) +FLD_RAW_RO_DEF( zqsfp28_present_24_17_status, port17_present, 0, 1) + +FLD_RAW_RO_DEF( zqsfp28_present_32_25_status, port32_present, 7, 1) +FLD_RAW_RO_DEF( zqsfp28_present_32_25_status, port31_present, 6, 1) +FLD_RAW_RO_DEF( zqsfp28_present_32_25_status, port30_present, 5, 1) +FLD_RAW_RO_DEF( zqsfp28_present_32_25_status, port29_present, 4, 1) +FLD_RAW_RO_DEF( zqsfp28_present_32_25_status, port28_present, 3, 1) +FLD_RAW_RO_DEF( zqsfp28_present_32_25_status, port27_present, 2, 1) +FLD_RAW_RO_DEF( zqsfp28_present_32_25_status, port26_present, 1, 1) +FLD_RAW_RO_DEF( zqsfp28_present_32_25_status, port25_present, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_rst_24_17, port24_rst, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_24_17, port23_rst, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_24_17, port22_rst, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_24_17, port21_rst, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_24_17, port20_rst, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_24_17, port19_rst, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_24_17, port18_rst, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_24_17, port17_rst, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_rst_32_25, port32_rst, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_32_25, port31_rst, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_32_25, port30_rst, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_32_25, port29_rst, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_32_25, port28_rst, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_32_25, port27_rst, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_32_25, port26_rst, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_rst_32_25, port25_rst, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_modsel_24_17, port24_modsel, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_24_17, port23_modsel, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_24_17, port22_modsel, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_24_17, port21_modsel, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_24_17, port20_modsel, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_24_17, port19_modsel, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_24_17, port18_modsel, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_24_17, port17_modsel, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_modsel_32_25, port32_modsel, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_32_25, port31_modsel, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_32_25, port30_modsel, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_32_25, port29_modsel, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_32_25, port28_modsel, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_32_25, port27_modsel, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_32_25, port26_modsel, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_modsel_32_25, port25_modsel, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_lpmode_24_17, port24_lpmode, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_24_17, port23_lpmode, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_24_17, port22_lpmode, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_24_17, port21_lpmode, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_24_17, port20_lpmode, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_24_17, port19_lpmode, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_24_17, port18_lpmode, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_24_17, port17_lpmode, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_lpmode_32_25, port32_lpmode, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_32_25, port31_lpmode, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_32_25, port30_lpmode, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_32_25, port29_lpmode, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_32_25, port28_lpmode, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_32_25, port27_lpmode, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_32_25, port26_lpmode, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_lpmode_32_25, port25_lpmode, 0, 1) + +FLD_RAW_RO_DEF( zqsfp28_irq_24_17_status, port24_irq_status, 7, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_24_17_status, port23_irq_status, 6, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_24_17_status, port22_irq_status, 5, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_24_17_status, port21_irq_status, 4, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_24_17_status, port20_irq_status, 3, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_24_17_status, port19_irq_status, 2, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_24_17_status, port18_irq_status, 1, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_24_17_status, port17_irq_status, 0, 1) + +FLD_RAW_RO_DEF( zqsfp28_irq_32_25_status, port32_irq_status, 7, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_32_25_status, port31_irq_status, 6, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_32_25_status, port30_irq_status, 5, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_32_25_status, port29_irq_status, 4, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_32_25_status, port28_irq_status, 3, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_32_25_status, port27_irq_status, 2, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_32_25_status, port26_irq_status, 1, 1) +FLD_RAW_RO_DEF( zqsfp28_irq_32_25_status, port25_irq_status, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_irq_msk_24_17_status, port24_irq_msk, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_24_17_status, port23_irq_msk, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_24_17_status, port22_irq_msk, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_24_17_status, port21_irq_msk, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_24_17_status, port20_irq_msk, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_24_17_status, port19_irq_msk, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_24_17_status, port18_irq_msk, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_24_17_status, port17_irq_msk, 0, 1) + +FLD_RAW_RW_DEF( zqsfp28_irq_msk_32_25_status, port32_irq_msk, 7, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_32_25_status, port31_irq_msk, 6, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_32_25_status, port30_irq_msk, 5, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_32_25_status, port29_irq_msk, 4, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_32_25_status, port28_irq_msk, 3, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_32_25_status, port27_irq_msk, 2, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_32_25_status, port26_irq_msk, 1, 1) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_32_25_status, port25_irq_msk, 0, 1) + +FLD_RAW_RO_DEF( zqsfp28_present_24_17_status, port_17_24_present, 0, 8) +FLD_RAW_RO_DEF( zqsfp28_present_32_25_status, port_25_32_present, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_rst_24_17, port_17_24_rst, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_rst_32_25, port_25_32_rst, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_modsel_24_17, port_17_24_modsel, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_modsel_32_25, port_25_32_modsel, 0, 8) +FLD_RAW_RO_DEF( zqsfp28_irq_24_17_status, port_17_24_irq_status,0, 8) +FLD_RAW_RO_DEF( zqsfp28_irq_32_25_status, port_25_32_irq_status,0, 8) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_24_17_status, port_17_24_irq_msk, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_irq_msk_32_25_status, port_25_32_irq_msk, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_lpmode_24_17, port_17_24_lpmode, 0, 8) +FLD_RAW_RW_DEF( zqsfp28_lpmode_32_25, port_25_32_lpmode, 0, 8) + +#endif /* __SLAVE_CPLD_REG */ diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/slave_cpld_sysfs.h b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/slave_cpld_sysfs.h new file mode 100644 index 000000000000..92d00d29d493 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/slave_cpld_sysfs.h @@ -0,0 +1,155 @@ +#ifndef __SLAVE_CPLD_SYSFS +#define __SLAVE_CPLD_SYSFS + +/* generic CPLD sysfs file definition macros */ +#define SYSFS_RAW_RO_ATTR_DEF(field) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO, slave_cpld_##field##_raw_read, NULL); + +#define SYSFS_RAW_RW_ATTR_DEF(field) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO | S_IWUGO, slave_cpld_##field##_raw_read, slave_cpld_##field##_raw_write); + +#define SYSFS_MISC_RO_ATTR_DEF(field, _read) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO, _read, NULL); + +#define SYSFS_MISC_RW_ATTR_DEF(field, _read, _write) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO | S_IWUGO, _read, _write); + +#define SYSFS_ATTR_PTR(field) \ +&field.attr + + +/* declare slave CPLD file system */ +SYSFS_RAW_RO_ATTR_DEF(mjr_rev) +SYSFS_RAW_RO_ATTR_DEF(mnr_rev) + +SYSFS_RAW_RW_ATTR_DEF(scrtch_reg) + +SYSFS_RAW_RO_ATTR_DEF(brd_rev) +SYSFS_RAW_RO_ATTR_DEF(brd_type) + +SYSFS_RAW_RO_ATTR_DEF(port24_present) +SYSFS_RAW_RO_ATTR_DEF(port23_present) +SYSFS_RAW_RO_ATTR_DEF(port22_present) +SYSFS_RAW_RO_ATTR_DEF(port21_present) +SYSFS_RAW_RO_ATTR_DEF(port20_present) +SYSFS_RAW_RO_ATTR_DEF(port19_present) +SYSFS_RAW_RO_ATTR_DEF(port18_present) +SYSFS_RAW_RO_ATTR_DEF(port17_present) + +SYSFS_RAW_RO_ATTR_DEF(port32_present) +SYSFS_RAW_RO_ATTR_DEF(port31_present) +SYSFS_RAW_RO_ATTR_DEF(port30_present) +SYSFS_RAW_RO_ATTR_DEF(port29_present) +SYSFS_RAW_RO_ATTR_DEF(port28_present) +SYSFS_RAW_RO_ATTR_DEF(port27_present) +SYSFS_RAW_RO_ATTR_DEF(port26_present) +SYSFS_RAW_RO_ATTR_DEF(port25_present) + +SYSFS_RAW_RW_ATTR_DEF(port24_rst) +SYSFS_RAW_RW_ATTR_DEF(port23_rst) +SYSFS_RAW_RW_ATTR_DEF(port22_rst) +SYSFS_RAW_RW_ATTR_DEF(port21_rst) +SYSFS_RAW_RW_ATTR_DEF(port20_rst) +SYSFS_RAW_RW_ATTR_DEF(port19_rst) +SYSFS_RAW_RW_ATTR_DEF(port18_rst) +SYSFS_RAW_RW_ATTR_DEF(port17_rst) + +SYSFS_RAW_RW_ATTR_DEF(port32_rst) +SYSFS_RAW_RW_ATTR_DEF(port31_rst) +SYSFS_RAW_RW_ATTR_DEF(port30_rst) +SYSFS_RAW_RW_ATTR_DEF(port29_rst) +SYSFS_RAW_RW_ATTR_DEF(port28_rst) +SYSFS_RAW_RW_ATTR_DEF(port27_rst) +SYSFS_RAW_RW_ATTR_DEF(port26_rst) +SYSFS_RAW_RW_ATTR_DEF(port25_rst) + +SYSFS_RAW_RW_ATTR_DEF(port24_modsel) +SYSFS_RAW_RW_ATTR_DEF(port23_modsel) +SYSFS_RAW_RW_ATTR_DEF(port22_modsel) +SYSFS_RAW_RW_ATTR_DEF(port21_modsel) +SYSFS_RAW_RW_ATTR_DEF(port20_modsel) +SYSFS_RAW_RW_ATTR_DEF(port19_modsel) +SYSFS_RAW_RW_ATTR_DEF(port18_modsel) +SYSFS_RAW_RW_ATTR_DEF(port17_modsel) + +SYSFS_RAW_RW_ATTR_DEF(port32_modsel) +SYSFS_RAW_RW_ATTR_DEF(port31_modsel) +SYSFS_RAW_RW_ATTR_DEF(port30_modsel) +SYSFS_RAW_RW_ATTR_DEF(port29_modsel) +SYSFS_RAW_RW_ATTR_DEF(port28_modsel) +SYSFS_RAW_RW_ATTR_DEF(port27_modsel) +SYSFS_RAW_RW_ATTR_DEF(port26_modsel) +SYSFS_RAW_RW_ATTR_DEF(port25_modsel) + +SYSFS_RAW_RW_ATTR_DEF(port24_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port23_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port22_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port21_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port20_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port19_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port18_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port17_lpmode) + +SYSFS_RAW_RW_ATTR_DEF(port32_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port31_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port30_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port29_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port28_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port27_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port26_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port25_lpmode) + +SYSFS_RAW_RO_ATTR_DEF(port24_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port23_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port22_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port21_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port20_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port19_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port18_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port17_irq_status) + +SYSFS_RAW_RO_ATTR_DEF(port32_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port31_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port30_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port29_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port28_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port27_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port26_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port25_irq_status) + +SYSFS_RAW_RW_ATTR_DEF(port24_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port23_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port22_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port21_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port20_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port19_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port18_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port17_irq_msk) + +SYSFS_RAW_RW_ATTR_DEF(port32_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port31_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port30_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port29_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port28_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port27_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port26_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port25_irq_msk) + +SYSFS_RAW_RO_ATTR_DEF(port_17_24_present) +SYSFS_RAW_RO_ATTR_DEF(port_25_32_present) +SYSFS_RAW_RW_ATTR_DEF(port_17_24_rst) +SYSFS_RAW_RW_ATTR_DEF(port_25_32_rst) +SYSFS_RAW_RW_ATTR_DEF(port_17_24_modsel) +SYSFS_RAW_RW_ATTR_DEF(port_25_32_modsel) +SYSFS_RAW_RO_ATTR_DEF(port_17_24_irq_status) +SYSFS_RAW_RO_ATTR_DEF(port_25_32_irq_status) +SYSFS_RAW_RW_ATTR_DEF(port_17_24_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port_25_32_irq_msk) +SYSFS_RAW_RW_ATTR_DEF(port_17_24_lpmode) +SYSFS_RAW_RW_ATTR_DEF(port_25_32_lpmode) + +#endif /* __SLAVE_CPLD_SYSFS */ diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/system_cpld_reg.h b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/system_cpld_reg.h new file mode 100644 index 000000000000..ba66519efe8a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/system_cpld_reg.h @@ -0,0 +1,107 @@ +#ifndef __SYSTEM_CPLD_REG +#define __SYSTEM_CPLD_REG + +static int system_cpld_raw_read(struct device *dev, struct device_attribute *attr, char *buf, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name); +static int system_cpld_raw_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count, + int reg_offset, int reg_width, int fld_shift, int fld_width, int fld_mask, char* reg_name); + +/* generic CPLD read function */ +#define FLD_RAW_RD_FUNC(_reg, _fld, _wdh) static ssize_t \ +system_cpld_##_fld##_raw_read(struct device *dev, struct device_attribute *attr, char *buf) { \ + return system_cpld_raw_read(dev, attr, buf, _reg##_offset, _reg##_width, _fld##_shift, _fld##_width, _fld##_mask, #_reg); \ +} + +/* generic CPLD write function */ +#define FLD_RAW_WR_FUNC(_reg, _fld, _wdh) static ssize_t \ +system_cpld_##_fld##_raw_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { \ + return system_cpld_raw_write(dev, attr, buf, count, _reg##_offset, _reg##_width, _fld##_shift, _fld##_width, _fld##_mask, #_reg); \ +} + +/* CPLD register definition macros */ +#define REG_DEF(_reg, _off, _wdh) \ +static unsigned int _reg##_offset = (unsigned int)(_off); \ +static unsigned int _reg##_width = (unsigned int)(_wdh); + +/* CPLD register field definition macros, with generic read/write function */ +#define FLD_RAW_RO_DEF(_reg, _fld, _sft, _wdh) \ +static unsigned int _fld##_shift = (unsigned int)(_sft); \ +static unsigned int _fld##_width = (unsigned int)(_wdh); \ +static unsigned int _fld##_mask = ((((unsigned int)1) << (_wdh)) - 1); \ +FLD_RAW_RD_FUNC(_reg, _fld, _wdh) + +#define FLD_RAW_RW_DEF(_reg, _fld, _sft, _wdh) \ +static unsigned int _fld##_shift = (unsigned int)(_sft); \ +static unsigned int _fld##_width = (unsigned int)(_wdh); \ +static unsigned int _fld##_mask = ((((unsigned int)1) << (_wdh)) - 1); \ +FLD_RAW_RD_FUNC(_reg, _fld, _wdh) FLD_RAW_WR_FUNC(_reg, _fld, _wdh) + +/* declare system CPLD registers */ +/* register name offset width */ +/* --------------------------------------- ------- ----- */ +REG_DEF( sys_cpld_rev, 0x00, 8) +REG_DEF( sys_cpld_gpr, 0x01, 8) +REG_DEF( cpu_brd_rev_type, 0x02, 8) +REG_DEF( sys_srr, 0x03, 8) +REG_DEF( sys_eeprom_wp, 0x04, 8) +REG_DEF( sys_irq, 0x05, 8) +REG_DEF( sys_wd, 0x06, 8) +REG_DEF( sys_mb_rst_en, 0x07, 8) +REG_DEF( cpu_pwr_en_status, 0x08, 8) +REG_DEF( cpu_pwr_status, 0x09, 8) + + +/* declare system CPLD register's fields */ +/* register name field name shift width */ +/* ---------------------- ---------------- ------ ----- */ +FLD_RAW_RO_DEF( sys_cpld_rev, mjr_rev, 4, 4) +FLD_RAW_RO_DEF( sys_cpld_rev, mnr_rev, 0, 4) + +FLD_RAW_RW_DEF( sys_cpld_gpr, scrtch_reg, 0, 8) + +FLD_RAW_RO_DEF( cpu_brd_rev_type, brd_rev, 4, 4) +FLD_RAW_RO_DEF( cpu_brd_rev_type, brd_type, 0, 4) + +FLD_RAW_RO_DEF( sys_srr, ssd_present, 3, 1) +FLD_RAW_RW_DEF( sys_srr, spi_cs_sel, 2, 1) +FLD_RAW_RW_DEF( sys_srr, rst_bios_switch, 1, 1) +FLD_RAW_RW_DEF( sys_srr, cpld_upgrade_rst, 0, 1) + +FLD_RAW_RW_DEF( sys_eeprom_wp, cpld_spi_wp, 4, 1) +FLD_RAW_RW_DEF( sys_eeprom_wp, system_id_eeprom_wp, 3, 1) +FLD_RAW_RW_DEF( sys_eeprom_wp, spi_me_wp, 2, 1) +FLD_RAW_RW_DEF( sys_eeprom_wp, spi_bios_wp, 1, 1) +FLD_RAW_RW_DEF( sys_eeprom_wp, spi_bak_bios_wp, 0, 1) + +FLD_RAW_RW_DEF( sys_irq, vrhot_irq_en, 6, 1) +FLD_RAW_RW_DEF( sys_irq, cpu_thermtrip_irq_en,5, 1) +FLD_RAW_RW_DEF( sys_irq, temp_alert_irq_en, 4, 1) +FLD_RAW_RO_DEF( sys_irq, vrhot_irq, 2, 1) +FLD_RAW_RO_DEF( sys_irq, cpu_thermtrip_irq, 1, 1) +FLD_RAW_RO_DEF( sys_irq, temp_alert_irq, 0, 1) + +FLD_RAW_RW_DEF( sys_wd, wd_timer, 4, 4) +FLD_RAW_RW_DEF( sys_wd, wd_en, 1, 1) +FLD_RAW_RW_DEF( sys_wd, wd_punch, 0, 1) + +FLD_RAW_RW_DEF( sys_mb_rst_en, mb_rst_en, 0, 1) + +FLD_RAW_RO_DEF( cpu_pwr_en_status, pwr_v3p3_en, 7, 1) +FLD_RAW_RO_DEF( cpu_pwr_en_status, pwr_vcc_vnn_en, 6, 1) +FLD_RAW_RO_DEF( cpu_pwr_en_status, pwr_vccsram_en, 5, 1) +FLD_RAW_RO_DEF( cpu_pwr_en_status, pwr_vddq_en, 4, 1) +FLD_RAW_RO_DEF( cpu_pwr_en_status, pwr_vcc_ref_en, 3, 1) +FLD_RAW_RO_DEF( cpu_pwr_en_status, pwr_v1p05_en, 2, 1) +FLD_RAW_RO_DEF( cpu_pwr_en_status, pwr_v1p8_en, 1, 1) +FLD_RAW_RO_DEF( cpu_pwr_en_status, pwr_v2p5_en, 0, 1) + +FLD_RAW_RO_DEF( cpu_pwr_status, pg_v3p3, 7, 1) +FLD_RAW_RO_DEF( cpu_pwr_status, pg_vcc_vnn, 6, 1) +FLD_RAW_RO_DEF( cpu_pwr_status, pg_vccsram, 5, 1) +FLD_RAW_RO_DEF( cpu_pwr_status, pg_vddq, 4, 1) +FLD_RAW_RO_DEF( cpu_pwr_status, pg_vcc_ref, 3, 1) +FLD_RAW_RO_DEF( cpu_pwr_status, pg_v1p05, 2, 1) +FLD_RAW_RO_DEF( cpu_pwr_status, pg_v1p8, 1, 1) +FLD_RAW_RO_DEF( cpu_pwr_status, pg_v2p5, 0, 1) + +#endif /* __SYSTEM_CPLD_REG */ diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/system_cpld_sysfs.h b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/system_cpld_sysfs.h new file mode 100644 index 000000000000..e6b03bd1bd0d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/modules/system_cpld_sysfs.h @@ -0,0 +1,76 @@ +#ifndef __SYSTEM_CPLD_SYSFS +#define __SYSTEM_CPLD_SYSFS + +/* generic CPLD sysfs file definition macros */ +#define SYSFS_RAW_RO_ATTR_DEF(field) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO, system_cpld_##field##_raw_read, NULL); + +#define SYSFS_RAW_RW_ATTR_DEF(field) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO | S_IWUGO, system_cpld_##field##_raw_read, system_cpld_##field##_raw_write); + +#define SYSFS_MISC_RO_ATTR_DEF(field, _read) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO, _read, NULL); + +#define SYSFS_MISC_RW_ATTR_DEF(field, _read, _write) \ +struct device_attribute field \ + = __ATTR(field, S_IRUGO | S_IWUGO, _read, _write); + +#define SYSFS_ATTR_PTR(field) \ +&field.attr + + +/* declare system CPLD file system */ +SYSFS_RAW_RO_ATTR_DEF(mjr_rev) +SYSFS_RAW_RO_ATTR_DEF(mnr_rev) + +SYSFS_RAW_RW_ATTR_DEF(scrtch_reg) + +SYSFS_RAW_RO_ATTR_DEF(brd_rev) +SYSFS_RAW_RO_ATTR_DEF(brd_type) + +SYSFS_RAW_RO_ATTR_DEF(ssd_present) +SYSFS_RAW_RW_ATTR_DEF(spi_cs_sel) +SYSFS_RAW_RW_ATTR_DEF(rst_bios_switch) +SYSFS_RAW_RW_ATTR_DEF(cpld_upgrade_rst) + +SYSFS_RAW_RW_ATTR_DEF(cpld_spi_wp) +SYSFS_RAW_RW_ATTR_DEF(system_id_eeprom_wp) +SYSFS_RAW_RW_ATTR_DEF(spi_me_wp) +SYSFS_RAW_RW_ATTR_DEF(spi_bios_wp) +SYSFS_RAW_RW_ATTR_DEF(spi_bak_bios_wp) + +SYSFS_RAW_RW_ATTR_DEF(vrhot_irq_en) +SYSFS_RAW_RW_ATTR_DEF(cpu_thermtrip_irq_en) +SYSFS_RAW_RW_ATTR_DEF(temp_alert_irq_en) +SYSFS_RAW_RO_ATTR_DEF(vrhot_irq) +SYSFS_RAW_RO_ATTR_DEF(cpu_thermtrip_irq) +SYSFS_RAW_RO_ATTR_DEF(temp_alert_irq) + +SYSFS_RAW_RW_ATTR_DEF(wd_timer) +SYSFS_RAW_RW_ATTR_DEF(wd_en) +SYSFS_RAW_RW_ATTR_DEF(wd_punch) + +SYSFS_RAW_RW_ATTR_DEF(mb_rst_en) + +SYSFS_RAW_RO_ATTR_DEF(pwr_v3p3_en) +SYSFS_RAW_RO_ATTR_DEF(pwr_vcc_vnn_en) +SYSFS_RAW_RO_ATTR_DEF(pwr_vccsram_en) +SYSFS_RAW_RO_ATTR_DEF(pwr_vddq_en) +SYSFS_RAW_RO_ATTR_DEF(pwr_vcc_ref_en) +SYSFS_RAW_RO_ATTR_DEF(pwr_v1p05_en) +SYSFS_RAW_RO_ATTR_DEF(pwr_v1p8_en) +SYSFS_RAW_RO_ATTR_DEF(pwr_v2p5_en) + +SYSFS_RAW_RO_ATTR_DEF(pg_v3p3) +SYSFS_RAW_RO_ATTR_DEF(pg_vcc_vnn) +SYSFS_RAW_RO_ATTR_DEF(pg_vccsram) +SYSFS_RAW_RO_ATTR_DEF(pg_vddq) +SYSFS_RAW_RO_ATTR_DEF(pg_vcc_ref) +SYSFS_RAW_RO_ATTR_DEF(pg_v1p05) +SYSFS_RAW_RO_ATTR_DEF(pg_v1p8) +SYSFS_RAW_RO_ATTR_DEF(pg_v2p5) + +#endif /* __SYSTEM_CPLD_SYSFS */ diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-ctrl b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-ctrl new file mode 100755 index 000000000000..73ff759b6f45 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-ctrl @@ -0,0 +1,679 @@ +#!/bin/bash +#/* +#********************************************************************** +#* +#* @filename fan-ctrl +#* +#* @purpose system daemon for controlling system fan pwm +#* +#* @create 2017/06/21 +#* +#* @author nixon.chu +#* +#* @history 2017/06/21: init version +#* +#********************************************************************** +#*/ + +DIR=$(dirname $0) + +# include files +source ${DIR}/funcs.sh + +#/* +#********************************************************************** +#* +#* CONSTANT VARIABLES +#* +#********************************************************************** +#*/ + +# process name/id +DAEMON_NAME=`basename $0` +DAEMON_PID="$$" + +# define symbol for fan/temperature type sensor +SYMBOL_TEMP="TEMP_" +SYMBOL_FAN="FAN_" + +# describe the structure of temperature sensor by id +STRUCT_TEMP_NAME=0 +STRUCT_TEMP_CMD=1 +STRUCT_TEMP_MAX=2 +STRUCT_TEMP_SIZE=$(( ${STRUCT_TEMP_MAX} + 1 )) + +# describe the structure of fan sensor by id +STRUCT_FAN_CMD=0 +STRUCT_FAN_SIZE=$(( ${STRUCT_FAN_CMD} + 1 )) + +# default fan zone configuration file +DEF_ZONE_CONF="${DIR}/fan-zone.conf" + +# default fan zone thermal configuration file +DEF_TEMP_CONF="${DIR}/fan-zone-thermal.conf" + +# default interval (sec) +DEF_INTERVAL=10 + +# default hysteresis (deg C) +DEF_HYSIS=3 + +# default debug mode (0: OFF, 1: ON) +DEF_DEBUG_MODE=0 + +# default log file +DEF_LOG_FILE="/var/log/syslog" + +# default fan level +DEF_FAN_LEVEL=0 + +# default minimum pwm (38.25=255x15%) +DEF_MIN_PWM=39 + +# default zone id +DEF_ZONE_ID=0 + +# error codes +E_STATUS_GOOD=0 +E_STATUS_FAULT=1 +E_INVALID_ARGS=11 +E_INVALID_CONF=12 + +# message levels +MSG_EMERG=0 +MSG_ALERT=1 +MSG_CRIT=2 +MSG_ERR=3 +MSG_WARNING=4 +MSG_NOTICE=5 +MSG_INFO=6 +MSG_DEBUG=7 + +# default message level +DEF_MSG_LEVEL=$MSG_WARNING + +#/* +#********************************************************************** +#* +#* GLOBAL VARIABLES +#* +#********************************************************************** +#*/ + +# temperature sensor group +GBL_TEMP_GRP=() +GBL_TEMP_NUM=${#GBL_TEMP_GRP[@]} + +# fan sensor group +GBL_FAN_GRP=() +GBL_FAN_NUM=${#GBL_FAN_GRP[@]} + +# fan level table +GBL_FAN_LEVEL=() +GBL_LEVEL_NUM=${#GBL_FAN_LEVEL[@]} + +# load defaults +GBL_ZONE_CONF=$DEF_ZONE_CONF +GBL_TEMP_CONF=$DEF_TEMP_CONF +GBL_INTERVAL=$DEF_INTERVAL +GBL_HYSIS=$DEF_HYSIS +GBL_DEBUG_MODE=$DEF_DEBUG_MODE +GBL_LOG_FILE=$DEF_LOG_FILE +GBL_CUR_LEVEL=$DEF_FAN_LEVEL +GBL_MIN_PWM=$DEF_MIN_PWM +GBL_ZONE_ID=$DEF_ZONE_ID +GBL_MSG_LEVEL=$DEF_MSG_LEVEL + +# temperature sensors' readings/statuses/properties (properties list have to be converted with fan level table) +GBL_TEMP_READINGS=() +GBL_TEMP_STATUSES=() +GBL_TEMP_PROPERTY=() + +#/* +#********************************************************************** +#* +#* FUNCTIONS +#* +#********************************************************************** +#*/ + +#/* +#* FEATURE: +#* usage +#* PURPOSE: +#* show the usage of this daemon +#* PARAMETERS: +#* +#* RETURNS: +#* success, this function returns @E_INVALID_ARGS. +#*/ +function usage() { + local dbg_mode + + [ $GBL_DEBUG_MODE -eq 0 ] && dbg_mode="off" || dbg_mode="on" + + echo -e "Usage: $0 [-z zone_file] [-t thermal_file] [-o log_file] [-d]" >&2 + echo -e "" >&2 + echo -e "Arguments:" >&2 + echo -e " -z, --zone-config Fan zone configuration file (default: $DEF_ZONE_CONF)" >&2 + echo -e " -t, --temp-config Fan zone thermal configuration file (default: $DEF_TEMP_CONF)" >&2 + echo -e " -o, --log-file Log file (default: $DEF_LOG_FILE)" >&2 + echo -e " -d, --debug Debug mode (default: $dbg_mode)" >&2 + exit ${E_INVALID_ARGS} +} + +#/* +#* FEATURE: +#* print_msg +#* PURPOSE: +#* print message by message level +#* PARAMETERS: +#* msg_lvl (IN) message level +#* msg (IN) message +#* RETURNS: +#* +#*/ +function print_msg() { + local msg_lvl=$1 + local msg=$2 + + [ $msg_lvl -le $GBL_MSG_LEVEL ] && echo "${msg}" >&2 +} + +#/* +#* FEATURE: +#* err_msg +#* PURPOSE: +#* log error message +#* PARAMETERS: +#* msg (IN) message +#* err_no (IN) error code +#* RETURNS: +#* success, this function returns non-zero error code. +#*/ +function err_msg() { + local msg=$1 + local err_no=$2 + + log_msg $MSG_ERROR "${msg}" + exit ${err_no} +} + +#/* +#* FEATURE: +#* log_msg +#* PURPOSE: +#* log message +#* PARAMETERS: +#* msg_lvl (IN) message level +#* msg (IN) message +#* RETURNS: +#* +#*/ +function log_msg() { + local msg_lvl=$1 + local msg=$2 + + if [ $GBL_LOG_FILE == $DEF_LOG_FILE ]; then + `logger -t $DAEMON_NAME -p $msg_lvl $msg` + else + echo -e "`date +"%b %_d %T"` `hostname` $DAEMON_NAME[$DAEMON_PID]: ${msg}" >> ${GBL_LOG_FILE} + fi + + print_msg $msg_lvl "${msg}" +} + +#/* +#* FEATURE: +#* debug_temp_grp +#* PURPOSE: +#* debug function for showing the temperature sensor group configs +#* @GBL_TEMP_GRP[]: store sensor group configs (sensor name, command, and max_temp) +#* PARAMETERS: +#* +#* RETURNS: +#* +#*/ +function debug_temp_grp() { + if [ $GBL_DEBUG_MODE -ne 0 ]; then + echo "********* Sensor Group *********" + for ((i=0; i<$GBL_TEMP_NUM; i++)) + do + echo -en "`fetch_temp_struct $i $STRUCT_TEMP_NAME`\t" + echo -en "`fetch_temp_struct $i $STRUCT_TEMP_CMD`\t" + echo "`fetch_temp_struct $i $STRUCT_TEMP_MAX`" + done + fi +} + +#/* +#* FEATURE: +#* debug_temp_readings +#* PURPOSE: +#* debug function for showing the temperature sensors' readings +#* @GBL_TEMP_READINGS[]: store current reading for temperature sensors +#* PARAMETERS: +#* +#* RETURNS: +#* +#*/ +function debug_temp_readings() { + if [ $GBL_DEBUG_MODE -ne 0 ]; then + echo "********* Sensor Reading *********" + for ((i=0; i<$GBL_TEMP_NUM; i++)) + do + echo -e "`fetch_temp_struct $i $STRUCT_TEMP_NAME`\t${GBL_TEMP_READINGS[$i]}" + done + fi +} + +#/* +#* FEATURE: +#* debug_temp_property +#* PURPOSE: +#* debug function for showing the temperature sensors' properties +#* @GBL_TEMP_PROPERTY[]: store temperature sensors' properties (asserted temperature for each fan levels) +#* PARAMETERS: +#* +#* RETURNS: +#* +#*/ +function debug_temp_property() { + local size base start_idx level + if [ $GBL_DEBUG_MODE -ne 0 ]; then + echo "********* Sensor Table *********" + for ((i=0; i<${GBL_TEMP_NUM}; i++)) + do + # show array @GBL_TEMP_PROPERTY[]: format name(1) + fan levels(2-?) + size=$(( ${GBL_LEVEL_NUM}+1 )) + base=$i*${size} + start_idx=$(( $base+1 )) + level=${GBL_LEVEL_NUM} + echo -e "${GBL_TEMP_PROPERTY[$base]}\t\t${GBL_TEMP_PROPERTY[@]:$start_idx:$level}" + done + fi +} + +#/* +#* FEATURE: +#* fetch_temp_struct +#* PURPOSE: +#* fetch the member value of specific temperature sensor +#* PARAMETERS: +#* id (IN) sensor id +#* member_id (IN) member id +#* RETURNS: +#* success, returns member value +#*/ +function fetch_temp_struct() { + local id member_id index_base data + + id=$1 + member_id=$2 + + index_base=$(( $id * $STRUCT_TEMP_SIZE )) + data=${GBL_TEMP_GRP[$(($index_base+$member_id))]} + # remove unuseful characters, such as double quotes('"') and the start/end space(' ') of a string. + data=`echo $data | sed 's/^ *\| *$//g' | sed 's/^"\|\"$//g'` + echo $data +} + +#/* +#* FEATURE: +#* fetch_temp_property +#* PURPOSE: +#* fetch the properties of specific temperature sensor +#* PARAMETERS: +#* name (IN) sensor name +#* RETURNS: +#* success, returns an asserted temperature list +#*/ +function fetch_temp_property() { + local name size base start_idx length + + name=$1 + + size=$(( $GBL_LEVEL_NUM+1 )) + for ((i=0; i<${GBL_TEMP_NUM}; i++)) + do + base=$i*${size} + # find sensor by name + if [ ${GBL_TEMP_PROPERTY[${base}]} == "${name}" ]; then + start_idx=$(( $base+1 )) + length=$GBL_LEVEL_NUM + echo ${GBL_TEMP_PROPERTY[@]:$start_idx:$length} + break + fi + done +} + +#/* +#* FEATURE: +#* debug_fan_speed +#* PURPOSE: +#* debug function for showing system current fan level and PWM +#* @GBL_CUR_LEVEL: system current/output fan level +#* PARAMETERS: +#* +#* RETURNS: +#* +#*/ +function debug_fan_speed() { + if [ $GBL_DEBUG_MODE -ne 0 ]; then + # For human readable, the representation of fan level will start from 1. + echo "Current Level: $(( $GBL_CUR_LEVEL+1 )), PWM: ${GBL_FAN_LEVEL[$GBL_CUR_LEVEL]}" + fi +} + +#/* +#* FEATURE: +#* arg_parse +#* PURPOSE: +#* parser for input arguments +#* PARAMETERS: +#* arg_lists[] (IN) argument list +#* RETURNS: +#* +#*/ +function arg_parse() { + while [[ $# -ge 1 ]] + do + key="$1" + case $key in + -z|--zone-config) + [ $# -lt 2 ] && usage + GBL_ZONE_CONF=$2 + [ ! -e $GBL_ZONE_CONF ] && usage + shift # past argument + ;; + -t|--temp-config) + [ $# -lt 2 ] && usage + GBL_TEMP_CONF=$2 + [ ! -e $GBL_TEMP_CONF ] && usage + shift # past argument + ;; + -o|--log-file) + [ $# -lt 2 ] && usage + GBL_LOG_FILE=$2 + shift # past argument + ;; + -d|--debug) + GBL_DEBUG_MODE=1 + ;; + *) + usage # unknown option + ;; + esac + shift # past argument or value + done +} + +#/* +#* FEATURE: +#* valid_conf +#* PURPOSE: +#* check if configuration files are valid +#* PARAMETERS: +#* +#* RETURNS: +#* success, this function returns nothing +#* fail, returns @E_INVALID_CONF +#*/ +function valid_conf() { + local list_1 list_2 match_num + + list_1=("${!1}") + list_2=("${!2}") + + # validate zone config + [ ${GBL_TEMP_NUM} -eq 0 ] && err_msg "config: status=invalid. reason=no TEMPERATURE SENSORS defined." "${E_INVALID_CONF}" + [ ${GBL_FAN_NUM} -eq 0 ] && err_msg "config: status=invalid. reason=no FAN defined." "${E_INVALID_CONF}" + + # validate thermal config + [ ${GBL_LEVEL_NUM} -eq 0 ] && err_msg "config: status=invalid. reason=no FAN LEVELS defined." "${E_INVALID_CONF}" + [ ${#list_2[@]} -ne ${GBL_TEMP_NUM} ] && err_msg "config: status=invalid. reason=the number of temperature sensors is inconsistent." "${E_INVALID_CONF}" + + # compare temperature sensor name between configuration files + match_num=0 + for i in ${!list_1[@]} + do + for j in ${!list_2[@]} + do + [ "${list_1[$i]}" == "${list_2[$j]}" ] && match_num=$(( $match_num+1 )) + done + done + [ $match_num -ne ${GBL_TEMP_NUM} ] && err_msg "config: status=invalid. reason=the name of temperature sensors is inconsistent." "${E_INVALID_CONF}" + + # validate pwm values + for pwm in ${GBL_FAN_LEVEL[@]} + do + expr $pwm + $GBL_MIN_PWM >/dev/null 2>&1 + [ $? -ne 0 ] && err_msg "config: status=invalid. reason=the value of pwm is not integer." "$E_INVALID_CONF" + [ $pwm -lt $GBL_MIN_PWM ] && err_msg "config: status=invalid. reason=the value of fan level is less than MIN_PWM($GBL_MIN_PWM)." "$E_INVALID_CONF" + done +} + +#/* +#* FEATURE: +#* initialize +#* PURPOSE: +#* load zone config and thermal config +#* PARAMETERS: +#* +#* RETURNS: +#* +#*/ +function initialize() { + local data conf_interval conf_hysis conf_min_pwm conf_zone_id conf_msg_level temp_list_1 temp_list_2 + + log_msg $MSG_INFO "Initializing fan control service..." + + # fetch temperature sensor name from configuration files + temp_list_1=(`cat ${GBL_ZONE_CONF} | grep "^${SYMBOL_TEMP}" | awk -F "," {'print $1'}`) + temp_list_2=(`cat ${GBL_TEMP_CONF} | grep "^${SYMBOL_TEMP}" | awk {'print $1'}`) + + # calculate the number of temperature/fan sensors + GBL_TEMP_NUM=${#temp_list_1[@]} + GBL_FAN_NUM=(`cat ${GBL_ZONE_CONF} | grep "^${SYMBOL_FAN}" | awk {'print $2'} | wc -l`) + + # calculate the number of fan levels + GBL_FAN_LEVEL=(`cat ${GBL_TEMP_CONF} | grep "^PWM" | awk -F "PWM" {'print $2'}`) + GBL_LEVEL_NUM=${#GBL_FAN_LEVEL[@]} + + # check if the interval/hyteresis should be updated. + conf_interval=`cat ${GBL_ZONE_CONF} | grep "^INTERVAL=" | awk -F "=" {'print $2'} | tail` + [ ! -z ${conf_interval} ] && GBL_INTERVAL=${conf_interval} + conf_hysis=`cat ${GBL_ZONE_CONF} | grep "^HYTERESIS=" | awk -F "=" {'print $2'} | tail` + [ ! -z ${conf_hysis} ] && GBL_HYSIS=${conf_hysis} + conf_min_pwm=`cat ${GBL_ZONE_CONF} | grep "^MIN_PWM=" | awk -F "=" {'print $2'} | tail` + [ ! -z ${conf_min_pwm} ] && GBL_MIN_PWM=${conf_min_pwm} + conf_zone_id=`cat ${GBL_ZONE_CONF} | grep "^ZONE_ID=" | awk -F "=" {'print $2'} | tail` + [ ! -z ${conf_zone_id} ] && GBL_ZONE_ID=${conf_zone_id} + conf_msg_level=`cat ${GBL_ZONE_CONF} | grep "^MSG_LEVEL=" | awk -F "=" {'print $2'} | tail` + [ ! -z ${conf_msg_level} ] && GBL_MSG_LEVEL=${conf_msg_level} + + # load zone config + for ((i=1; i<=${GBL_TEMP_NUM}; i++)) + do + GBL_TEMP_STATUSES+=($E_STATUS_GOOD) + data=`cat ${GBL_ZONE_CONF} | grep "^${SYMBOL_TEMP}" | awk NR==$i` + # FIXME + GBL_TEMP_GRP+=("`echo $data | awk -F ", " {'print $1'}`") + GBL_TEMP_GRP+=("`echo $data | awk -F ", " {'print $2'}`") + GBL_TEMP_GRP+=("`echo $data | awk -F ", " {'print $3'}`") + done + debug_temp_grp + + for ((i=1; i<=${GBL_FAN_NUM}; i++)) + do + data=`cat ${GBL_ZONE_CONF} | grep "^${SYMBOL_FAN}" | awk NR==$i{'print $2'}` + GBL_FAN_GRP+=("`echo $data`") + done + + # load thermal config + for ((i=0; i<${GBL_TEMP_NUM}; i++)) + do + index=$(( $i * ${STRUCT_TEMP_SIZE} + ${STRUCT_TEMP_NAME} )) + sensor_name=${GBL_TEMP_GRP[$index]} + GBL_TEMP_PROPERTY+=(`cat ${GBL_TEMP_CONF} | grep "^${sensor_name}" | tail`) + done + debug_temp_property + + # check if the config files is valid + valid_conf temp_list_1[@] temp_list_2[@] +} + +#/* +#* FEATURE: +#* temperature_collection +#* PURPOSE: +#* collect all temperature sensor readlings +#* PARAMETERS: +#* +#* RETURNS: +#* success, returns a series of reading @GBL_TEMP_READINGS[] +#*/ +function temperature_collection() { + local name cmd max_temp reading status pre_status + + GBL_TEMP_READINGS=() + for ((i=0; i<${GBL_TEMP_NUM}; i++)) + do + # read temperature sensor value & record sensor status + name=`fetch_temp_struct $i ${STRUCT_TEMP_NAME}` + cmd=`fetch_temp_struct $i ${STRUCT_TEMP_CMD}` + max_temp=`fetch_temp_struct $i ${STRUCT_TEMP_MAX}` + reading=`eval ${cmd} 2>/dev/null` + if [ $? -eq 0 ]; then + GBL_TEMP_READINGS+=($reading) + status=$E_STATUS_GOOD + else + GBL_TEMP_READINGS+=($max_temp) + status=$E_STATUS_FAULT + fi + + # Compare previous status of temperature sensor, then update it. + pre_status=${GBL_TEMP_STATUSES[$i]} + if [ $pre_status -eq $E_STATUS_GOOD ] && [ $status -eq $E_STATUS_FAULT ]; then + # Good -> Fault + log_msg $MSG_WARN "[ZONE_${GBL_ZONE_ID}] Sensor $name: status=ERROR. reason=read sensor failed." + elif [ $pre_status -eq $E_STATUS_FAULT ] && [ $status -eq $E_STATUS_GOOD ]; then + # Fault -> Good + log_msg $MSG_WARN "[ZONE_${GBL_ZONE_ID}] Sensor $name: status=RECOVER. reason=reading is $reading deg C" + fi + GBL_TEMP_STATUSES[$i]=$status + done + debug_temp_readings +} + +#/* +#* FEATURE: +#* fan_level_selection +#* PURPOSE: +#* select proper fan level by temperature sensor reading +#* PARAMETERS: +#* reading_list (IN) sensor reading list +#* RETURNS: +#* success, returns a fan level value +#*/ +function fan_level_selection() { + local reading_list name reading temp_list highest_level pre_level next_level hysis_temp res res1 + + reading_list=("${!1}") + highest_level=0 + pre_level=${GBL_CUR_LEVEL} + next_level=0 + + # search fan table by each temperature sensor reading + for ((i=0; i<${GBL_TEMP_NUM}; i++)) + do + name=`fetch_temp_struct $i $STRUCT_TEMP_NAME` + reading=${reading_list[$i]} + temp_list=(`fetch_temp_property ${name}`) + for j in ${!temp_list[@]} + do + res=`echo $reading \<= ${temp_list[$j]} | bc -l` + if [ $res -eq 1 ] || [ $j -eq $((${#temp_list[@]}-1)) ]; then + if [ $j -gt $highest_level ]; then + highest_level=$j + fi + break + fi + done + done + + if [ $highest_level -lt $pre_level ]; then + # Determine if require decreasing current fan level @assert_level + local pass_num + pass_num=0 + for ((i=0; i<${GBL_TEMP_NUM}; i++)) + do + name=`fetch_temp_struct $i $STRUCT_TEMP_NAME` + reading=${reading_list[$i]} + temp_list=(`fetch_temp_property ${name}`) + assert_level=$(( $pre_level-1 )) + hysis_temp=`echo ${temp_list[$assert_level]} - $GBL_HYSIS | bc` + res=`echo $reading \<= $hysis_temp | bc -l` + if [ $res -eq 1 ]; then + pass_num=$(( $pass_num+1 )) + else + break + fi + done + if [ $pass_num -eq ${GBL_TEMP_NUM} ]; then + # Decrease fan pwm: All sensor reading should less than its own hysteresis temperature + next_level=${highest_level} + else + # Keep current fan pwm + next_level=${pre_level} + fi + else + # Increase fan pwm + next_level=${highest_level} + fi + GBL_CUR_LEVEL=${next_level} +} + +#/* +#* FEATURE: +#* apply_fan_level +#* PURPOSE: +#* convert given fan level to PWM, then output to fans +#* PARAMETERS: +#* fan_list (IN) fan devices list +#* fan_level (IN) fan level +#* RETURNS: +#* success, returns a pwm value +#*/ +function apply_fan_level() { + local fan_level fan_list + + fan_list=("${!1}") + fan_level=$2 + + for fan in ${fan_list[@]} + do + echo ${GBL_FAN_LEVEL[$fan_level]} > $fan + done + debug_fan_speed +} + +#/* +#********************************************************************** +#* +#* MAIN +#* +#********************************************************************** +#*/ +Platform_init +arg_parse $@ +initialize +log_msg $MSG_INFO "Starting fan control service..." +while [ true ]; do + temperature_collection + fan_level_selection GBL_TEMP_READINGS[@] + apply_fan_level GBL_FAN_GRP[@] ${GBL_CUR_LEVEL} + sleep $GBL_INTERVAL +done + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone-thermal_B2F.conf b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone-thermal_B2F.conf new file mode 100644 index 000000000000..56409f5c3e30 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone-thermal_B2F.conf @@ -0,0 +1,12 @@ +##### Temperature vs Fan table ##### +## FORMAT: "PWM" fan speed(range from 0 to 255) +# Duty Cycle 25% 30% 35% 40% 45% 50% 55% 60% 65% 70% 75% 80% 85% 90% 95% 100% +PWM 64 77 89 102 115 128 140 153 166 179 191 204 217 230 242 255 +## FORMAT: sensor name(TEMP_XXX) with asserted temperature by each levels +TEMP_CPU 52 55 58 61 64 67 70 73 76 79 82 85 88 91 94 97 +TEMP_SWITCH 75 78 81 84 87 90 93 96 99 102 105 108 111 114 117 120 +#TEMP_HDD 25 +#TEMP_TMP75_CPU 25 +#TEMP_TMP75_CENTER 25 +#TEMP_TMP75_RIGHT 33 37 41 45 49 53 57 61 65 69 73 77 81 85 89 93 +TEMP_TMP75_FAN 26.5 31.5 36.5 41.5 46.5 51.5 56.5 61.5 66.5 71.5 76.5 81.5 86.5 91.5 96.5 101.5 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone-thermal_F2B.conf b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone-thermal_F2B.conf new file mode 100644 index 000000000000..6c459d874feb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone-thermal_F2B.conf @@ -0,0 +1,12 @@ +##### Temperature vs Fan table ##### +## FORMAT: "PWM" fan speed(range from 0 to 255) +# Duty Cycle 25% 30% 35% 40% 45% 50% 55% 60% 65% 70% 75% 80% 85% 90% 95% 100% +PWM 64 77 89 102 115 128 140 153 166 179 191 204 217 230 242 255 +## FORMAT: sensor name(TEMP_XXX) with asserted temperature by each levels +TEMP_CPU 60 65 70 73 76 79 82 85 88 91 94 97 100 103 106 109 +TEMP_SWITCH 73 76 79 82 85 88 91 94 97 100 103 106 109 112 115 118 +#TEMP_HDD 25 +#TEMP_TMP75_CPU 25 +#TEMP_TMP75_CENTER 25 +TEMP_TMP75_RIGHT 33 37 41 45 49 53 57 61 65 69 73 77 81 85 89 93 +#TEMP_TMP75_FAN 25 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone_B2F.conf b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone_B2F.conf new file mode 100644 index 000000000000..b51f3b7aa67d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone_B2F.conf @@ -0,0 +1,38 @@ +##### ZONE ID ##### +ZONE_ID=0 + +##### SENSOR GROUP START ##### +## FORMAT: name(TEMP_XXX), command, max_temp(deg C) +TEMP_CPU, "data=`sensors | grep coretemp -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $4'} | sed 's/^+\|°C//g'", 110 +TEMP_SWITCH, "[ `file /var/run/docker-syncd/sswsyncd.socket | grep -c " socket"` -ne 1 ] && exit 1; [ `ss -a | grep "/var/run/sswsyncd/sswsyncd.socket" |grep -c "LISTEN"` -ne 1 ] && exit 1; data=`bcmcmd -c "show temp" | grep "temperature monitor"`; [ $? -ne 0 ] && exit 1; switch_temps=(`echo "$data" | awk {'print $5'} | sed 's/,//g'`); high_temp=0; for reading in ${switch_temps[@]}; do res=`echo "$reading > $high_temp" | bc -l`; [ $res -eq 1 ] && high_temp=$reading; done; echo $high_temp", 120 +#TEMP_HDD, "data=`hddtemp /dev/sdb | grep -v "not available"`; [ $? -ne 0 ] && exit 1; echo "$data" | awk -F ": " {'print $3'} | sed 's/°C//g'", 85 +#TEMP_TMP75_CPU, "data=`sensors | grep tmp75-i2c-0-4e -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $2'} | sed 's/^+\|°C//g'", 125 +#TEMP_TMP75_CENTER, "data=`sensors | grep tmp75-i2c-4-4a -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $2'} | sed 's/^+\|°C//g'", 125 +#TEMP_TMP75_RIGHT, "data=`sensors | grep tmp75-i2c-4-4c -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $2'} | sed 's/^+\|°C//g'", 125 +TEMP_TMP75_FAN, "data=`sensors | grep tmp75-i2c-4-4d -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $2'} | sed 's/^+\|°C//g'", 125 +##### SENSOR GROUP END ##### + +##### FAN GROUP START ##### +## FORMAT: name(FAN_YYY) input_files +FAN_1 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm1 +FAN_2 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm2 +FAN_3 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm3 +FAN_4 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm4 +FAN_5 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm5 +FAN_6 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm6 +FAN_7 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm1 +FAN_8 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm2 +FAN_9 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm3 +FAN_10 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm4 +FAN_11 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm5 +FAN_12 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm6 +##### FAN GROUP END ##### + +##### INTERVAL (sec) ##### +INTERVAL=10 + +##### HYTERESIS (deg C) ##### +HYTERESIS=2 + +##### MINIMUM PWM (38.25=255x15%) ##### +MIN_PWM=39 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone_F2B.conf b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone_F2B.conf new file mode 100644 index 000000000000..2d5987c5c66b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/fan-zone_F2B.conf @@ -0,0 +1,38 @@ +##### ZONE ID ##### +ZONE_ID=0 + +##### SENSOR GROUP START ##### +## FORMAT: name(TEMP_XXX), command, max_temp(deg C) +TEMP_CPU, "data=`sensors | grep coretemp -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $4'} | sed 's/^+\|°C//g'", 110 +TEMP_SWITCH, "[ `file /var/run/docker-syncd/sswsyncd.socket | grep -c " socket"` -ne 1 ] && exit 1; [ `ss -a | grep "/var/run/sswsyncd/sswsyncd.socket" |grep -c "LISTEN"` -ne 1 ] && exit 1; data=`bcmcmd -c "show temp" | grep "temperature monitor"`; [ $? -ne 0 ] && exit 1; switch_temps=(`echo "$data" | awk {'print $5'} | sed 's/,//g'`); high_temp=0; for reading in ${switch_temps[@]}; do res=`echo "$reading > $high_temp" | bc -l`; [ $res -eq 1 ] && high_temp=$reading; done; echo $high_temp", 120 +#TEMP_HDD, "data=`hddtemp /dev/sdb | grep -v "not available"`; [ $? -ne 0 ] && exit 1; echo "$data" | awk -F ": " {'print $3'} | sed 's/°C//g'", 85 +#TEMP_TMP75_CPU, "data=`sensors | grep tmp75-i2c-0-4e -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $2'} | sed 's/^+\|°C//g'", 125 +#TEMP_TMP75_CENTER, "data=`sensors | grep tmp75-i2c-4-4a -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $2'} | sed 's/^+\|°C//g'", 125 +TEMP_TMP75_RIGHT, "data=`sensors | grep tmp75-i2c-4-4c -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $2'} | sed 's/^+\|°C//g'", 125 +#TEMP_TMP75_FAN, "data=`sensors | grep tmp75-i2c-4-4d -A2`; [ $? -ne 0 ] && exit 1; echo "$data" | tail -n1 | awk {'print $2'} | sed 's/^+\|°C//g'", 125 +##### SENSOR GROUP END ##### + +##### FAN GROUP START ##### +## FORMAT: name(FAN_YYY) input_files +FAN_1 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm1 +FAN_2 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm2 +FAN_3 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm3 +FAN_4 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm4 +FAN_5 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm5 +FAN_6 /sys/bus/i2c/devices/3-0020/hwmon/hwmon*/pwm6 +FAN_7 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm1 +FAN_8 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm2 +FAN_9 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm3 +FAN_10 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm4 +FAN_11 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm5 +FAN_12 /sys/bus/i2c/devices/3-0023/hwmon/hwmon*/pwm6 +##### FAN GROUP END ##### + +##### INTERVAL (sec) ##### +INTERVAL=10 + +##### HYTERESIS (deg C) ##### +HYTERESIS=2 + +##### MINIMUM PWM (38.25=255x15%) ##### +MIN_PWM=39 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/funcs.sh b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/funcs.sh new file mode 100755 index 000000000000..3e417f699543 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/funcs.sh @@ -0,0 +1,22 @@ +#!/bin/bash +#/* +#********************************************************************** +#* +#* @filename funcs.sh +#* +#* @purpose api functions script for fan-ctrl +#* +#* @create 2017/08/09 +#* +#* @author nixon.chu +#* +#* @history 2017/08/09: init version +#* +#********************************************************************** +#*/ + +DIR=$(dirname $0) + +function Platform_init() { + ${DIR}/init.sh +} diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/init.sh b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/init.sh new file mode 100755 index 000000000000..06df071fa147 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/fan-ctrl/init.sh @@ -0,0 +1,26 @@ +#!/bin/bash +DIR=$(dirname $0) + +# board type +BOARD_TYPE=`cat /sys/bus/i2c/devices/1-0032/brd_type` + +# fan tables +FORWARD_SENSOR_CONF=${DIR}/fan-zone_F2B.conf +FORWARD_PWM_CONF=${DIR}/fan-zone-thermal_F2B.conf +REVERSE_SENSOR_CONF=${DIR}/fan-zone_B2F.conf +REVERSE_PWM_CONF=${DIR}/fan-zone-thermal_B2F.conf + +# Nixon: Please refer to "BMS CPLD Design Spec." +# board type : BRD_TYPE[3:0] +# 0x0 (0000b): BMS_AC_PSU_NORMAL_FAN, 0x2 (0010b): BMS_DC_PSU_NORMAL_FAN +# 0x1 (0001b): BMS_AC_PSU_REVERSE_FAN, 0x3 (0011b): BMS_DC_PSU_REVERSE_FAN +case $BOARD_TYPE in + 0x0|0x2) + ln -sf $FORWARD_SENSOR_CONF ${DIR}/fan-zone.conf + ln -sf $FORWARD_PWM_CONF ${DIR}/fan-zone-thermal.conf + ;; + 0x1|0x3) + ln -sf $REVERSE_SENSOR_CONF ${DIR}/fan-zone.conf + ln -sf $REVERSE_PWM_CONF ${DIR}/fan-zone-thermal.conf + ;; +esac diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/funcs.sh b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/funcs.sh new file mode 100755 index 000000000000..4b0c4c35471f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/funcs.sh @@ -0,0 +1,23 @@ +#/bin/bash + +# process name/id +DAEMON_NAME=`basename $0` +DAEMON_PID="$$" + +DEF_SEVERITY="INFO" + +#/* +#* FEATURE: +#* log_msg +#* PURPOSE: +#* log message +#* PARAMETERS: +#* msg (IN) message +#* RETURNS: +#* +#*/ +function log_msg() { + local msg=$1 + + `logger -t $DAEMON_NAME -p $DEF_SEVERITY $msg` +} diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/start_service.sh b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/start_service.sh new file mode 100755 index 000000000000..2bc9589738d0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/start_service.sh @@ -0,0 +1,99 @@ +#/bin/bash + +DIR=$(dirname $0) + +# include files +source ${DIR}/funcs.sh + +ACPI_INSTALL_PRINT=0 +ACPID_INSTALL_PRINT=0 +BC_INSTALL_PRINT=0 +ACPID_SOCKET_PRINT=0 +ACPI_PRINT=0 + + +while [ 1 ] +do + if [ `dpkg -l |grep -c "acpi "` -eq "0" ]; then + dpkg -i /opt/debs/acpi_1.7-1_amd64.deb + if [ "$?" -ne "0" ]; then + if [ $ACPI_INSTALL_PRINT -eq 0 ]; then + ACPI_INSTALL_PRINT=1 + log_msg "Wait for acpi package install." + fi + sleep 1 + continue + else + log_msg "Install acpi package success." + fi + fi + break +done + +while [ 1 ] +do + if [ `dpkg -l |grep -c "acpid "` -eq "0" ]; then + dpkg -i /opt/debs/acpid_2.0.23-2_amd64.deb + if [ "$?" -ne "0" ]; then + if [ $ACPID_INSTALL_PRINT -eq 0 ]; then + ACPID_INSTALL_PRINT=1 + log_msg "Wait for acpid package install." + fi + sleep 1 + continue + else + log_msg "Install acpid package success." + fi + fi + break +done + +while [ 1 ] +do + if [ `dpkg -l |grep -c " bc "` -eq "0" ]; then + dpkg -i /opt/debs/bc_1.06.95-9_amd64.deb + if [ "$?" -ne "0" ]; then + if [ $BC_INSTALL_PRINT -eq 0 ]; then + BC_INSTALL_PRINT=1 + log_msg "Wait for bc package install." + fi + sleep 1 + continue + else + log_msg "Install bc package success." + fi + fi + break +done + +while [ 1 ] +do + if [ ! -e "/sys/firmware/acpi/interrupts/gpe01" ]; then + if [ $ACPI_PRINT -eq 0 ]; then + ACPI_PRINT=1 + log_msg "Wait for acpi daemon start." + fi + sleep 1 + continue + fi + log_msg "The acpi daemon start." + break +done + +while [ 1 ] +do + if [ ! -e "/var/run/acpid.socket" ]; then + if [ $ACPID_SOCKET_PRINT -eq 0 ]; then + ACPID_SOCKET_PRINT=1 + log_msg "Wait for acipd daemon start." + fi + sleep 1 + continue + fi + log_msg "The acpid daemon start." + break +done + +/etc/init.d/xcvr_servd start +/etc/init.d/sys_servd start +exit 0; diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/start_watchdog.sh b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/start_watchdog.sh new file mode 100755 index 000000000000..2268e5e0d16e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/script/start_watchdog.sh @@ -0,0 +1,32 @@ +#/bin/bash + +DIR=$(dirname $0) + +# include files +source ${DIR}/funcs.sh + +WATCHDOG_PRINT=0 + +while [ 1 ] +do + if [ `dpkg -l |grep -c "watchdog "` -eq "0" ]; then + dpkg -i /opt/debs/watchdog_5.14-3_amd64.deb + if [ "$?" -ne "0" ]; then + if [ $WATCHDOG_PRINT -eq 0 ]; then + WATCHDOG_PRINT=1 + log_msg "Wait for watchdog package install." + fi + sleep 1 + continue + else + log_msg "Install watchdog package success." + fi + fi + break +done + +ln -sf /opt/watchdog/watchdog.conf /etc/watchdog.conf + +/usr/sbin/watchdog -c /etc/watchdog.conf + +exit 0; diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/sys-serv/sys-servd b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/sys-serv/sys-servd new file mode 100755 index 0000000000000000000000000000000000000000..a1b4f177897c42c8a94085c9ff05092e187a83d5 GIT binary patch literal 56280 zcmeHw3t&{$(f>_CG@_6QSnQ2L`h}JMq_;LWd(S5ccvc2j?;F&6AX{a?MNaZ<~S8f&Dy;3DLv@8!JC?Dy% zN9cQ2mM~t!d1rIdn&weZ=OgtfUx(!DkbE{2#X1D)`cd8J-5W#Dhm!2etZ{LeDr0~zGskpZ8V z!EP6W--Cb2*N6<|K9m9fHUy-z&qW#duK~X&xlp9PltItz4ESxxldjy(4EQw}^yw6Q zG~bJy#)UW-3{l)0YWXM4oZ>GJ1Osy`>qCLy%qiolYHI>BOXpMtEWdwlb#0BmK2#bE z`Tdsv>IMGk!Z)s}w7x!2ud=7jTz$L0K2TF`0fuW3Z|BopZC#*-U@%Y?s9X@Rph#V4 zUNBHvPTCY%3xk!RfF&q@bvP7Q1m)^O!P*9kxUBjHXjz@aQCU+NvQdFWNI?Dqs2>Oh zYij*fwPmHD%Gw&6MaczvzKtq_bfe_bP$=kUv1PS2HGwimJX7ieq586Uf%3Z2V5y^w zn^ap>S=L~cRn^ufR|w{yqEYuUs`V(V9?3w+s;>)H)`Ti7RJW$Ay3VSvoLf^`WtEo( z&^C%IX>{)(KWu%7v=}L93>+EC76IO?hR|Dy^!US6W{i zL{U|NK%G@uRu-tQCs|xvCusviLvCqH)`U zf1%SVPoUDS5(c7w19(jjpHB1~>l&M$ZQX-DqUQ(qf9pX^D{`&tK_{Hz&$jv7R+j*) z=16_{PX2tegl~?=Ux>4>JOi(FCSrksmnjbC>1*KiT!#oA18>d;2N`%OTVF*6-kE_| z)@TC{L)e$sz<0N?mgO_>CmQ%^2L2=ie}jSVVc<&)d`|;E&%oy!_&Nix+lI)C4E)Ik z|55{Q#?2K5p5|ZrT4UgQYb4-W15a~3eKi~SQ#2BAy@CIdf!|=@Pc`tH47}+-Q3HRP z!N0@6pKjn=4g47fevg6IYY8H^8Thjd{+NN6B>_`A417O>ztg~b47|0bgj3{$=NR}r z1Anf8FEH@u8Th^iet?1Z82Et(evpAb-@q3cc$zEeYqWvCP$L1o2L8(i-e=%1GVs$3 z{9prrgMlwJ@V>_VdA_FHTbFt)-|}cEH+CPQgs*XX-U|j3ZWAM~21{bVWc3iAOm-jM5ZR;u|=9A*Csl#G5&NE~P1i#Mf~8bV}1w zD!!D{y(mr17_Z}WcS=(TiI;FXo6;0I;?p?&*L0AO`HDG=+e88>hEXn!0|xmD8IkOl+*W8n!0Sfj?>?uGQeCyoW79K{VCnd>2oPfT`RtZ)2CCKx>S5A zr+ZPFx>CH3)7>deT_|3{>1;}0K?jNDuw%q{yzX_#*H5 z8uxZgn>nc^+Fb6nd@Wmx7_`j4)N92iqT&ZC^81aqtW6UiFR^C%273W~jh#Jxk@pvz zu?f<++njvs^F&Crfq5Arty^EHpsP@)w-9}n@9qy-z}C-mAix*t@NJD<<;!}}x9juJ zDYmo|wY2hLg*h*6DDl44ZejoDL z!akx5iPl@=cOVblqsM!Ek;O4zB;3|g+)2u|6dxqeG^^9sR2+-E?u)c={@8+pi9}=@ zkZq9y`rBkRb|%6jV}-ysS&`y{O~nTzEipgrP0!$3@3xL(}EahTQn0q*QT-Z&kSU8B%bw2Y*mrKZrxL zYPdM|qkk$z4m1@X0O55aup*GfigdUY832a%8TlKFTk|(Y8#}YYXQA9Zq;cN>G^XyY zG(LzLwhs_SA6X`{3tXd#%c?vfVpb)a9w)?ES@6#ep`TKt(TNBm7K z#RsUk_KA?Pst=s^KvpXncUAF9U*yHe8?j}hlX8C*xtoetk}Kv@$!lB2FQ+xL)!w}k znHv`$$XfEGtwpo0$2{h38o#`?u`?%hhLOq&^{`XRqv6Yt*i7;wTVH)I0$tFb&S?eV zTwl|2GGkK#IJOAKzDUOj=0}bW=mTv5z-Yq z&5)h#Dk&>mq-kr&h9sWcA+2~K7~&su9IJ7EL1Zxnvn>fSRZHxvBQ490Rdt9}YvH16 z5vw{{iuZ#B4)vS@94=alpQ03a;3J4>t7f4C(LIIISPp_tq_eC`BT|2JXA6qS@_VZ7N>h7|n_luWy>Q9vL~$_mHRkT%vSlFFZXR$715R z>c!${Ipsm;o4>j*c>`G_ zG)b!7eknvI)q4}wJ9L&R5oHIGWIkrdToPr|hRU_PS*h}#VtJ#L?qaT5?EOi_v)i4b zvXY9r$}H+f%0qg7nn=X|3^z(MxS*+YqoxkvPalAjphqVU;MKqz1NbAKBo8h-++qB$ ze}2}NV5nJ83!ZJbjo8joDjQ;m1@u3M9UL<)>Db1)rhQhJFdbtJJ`f>NaF8E zKzj2X$~-?L^=$Jz{Wq6+_JQbDA;~-=RaHLSlgT_Yp;@wdXwhVw=RPp72ifMyQk8Mc z<6)(e&2x2%Zb|0(Hp?ON{G0?Foq3j#dbW8U{K#dV77)8M&zDqHU>Lk$1t1DJW7HZe-o57I7-vbelZZCfP2-Qj|)v%iXrbhm=HP+FXQQwTr0-M-U2c4xHcLm-EW}xakzJe5hL_s~ts~L8 z*R|QbZVJ%0-NG|~4K8h)NsCNf&b7)jGr***b4g$Z48_%6F=e zGYtY!`3}^&Bf*vLpeXW>57Sltyp-aSDj($HI#JgZq$qV0syrbUDui8mFDkzSm5(|# z$Dr5}dj%!?R!z%-mQgfftGMnC(sNaqmR>uap$9RWQ6FmBSWi&&B=_=|mld}SbUPGM z20~eEpiAA&6}9!e17mRZU4x)BgkGZZZMnhCeJ{8-Va!XkPlh5LjnxOUnr0nT6Z9Nk z7EEjTR{46w`xrkyK$-^Ui4vAa6BymC5Yw0ui3Gr4co7T^?aCqcKdboLF9rVEz}SV z;Kr|-qMP;m`)OGh&Tc=6We%?gG+o9k-4)|PL~b&XU#(ZZWPpf)&(Y!4Ij zSZLSRwjowA&#y<`*e95gIAlzoBjL`-tOL(`o+zmE^EoVo2LQG&G~%vag;X|HFl(^ znLHG2B}HF=YdJKPiIv=mqQ%EU$D=58t8*2(gzE5kD%n_xVh<&<7*loGH`yO)-P)F& z)tVJWScyN$P2Rcrw=ci^@~2pIZH?tbqD|eFFNLl=C134kczx@KIaq=+e`Lp}?`{1c z$Ch`&*2vCCt8Z)DacFVu7l|98TQo*Xe7VYzd~lki;xwbfg>IxqtXJ6E)CyZF9;T&U zQ}KSp2)kr>P5#$M^6YuPC{HUatZer?!nHHIkXkP)k^9cAsU^B>SrS?N1Z?SrS!AWz zRQv>d-tIG|#Fp53Sox4D^OCpDSzHazJDAqEe+Ks$8My}9`{a79VRla+yi3|fNN{4ANJOC z&tkDXT5_A0VXKl&XXt~TiYVIQi_D6ta4-Qeh@ymw8i+$36o)8HAp_}Hq(E_Agx0ew z#^LFC?zY_^0eqb*L{M~~CVeM{9Xh5Tz@3xNiCau;fl&B@-32JdcG3n8%{96`K+=?y zpP5pONT8@oAx2Ex-oI&<5gaIHLtYfVM8fEjsCL4V*Hz{jF449VaiHPtt2TRdlL*`oF72Mv5{v2oOa^)CEJ610ni4JTeSXD#_74clQE9=$s2 zMJ{e^Gf>`{%iEfAzuxGvF4>0hlv=nw-cO%%RubCaPW;aFtWUJ)5Pg&nZ7Y1ZDR zDKW$lR{T-)zt}(7r)gUkaVX4Qywr@}Uiyrn|;mByv_G^vErlM_A9@QLEJ`T%hgH~Twl>TmQ%kkw} z50Rh3>3DH4a32rFtp1f`mZscSF|D|y_~4z7rV2)`ZCgC^Tq=ejfk)bjZuV4(H5&36_XxJ?$RlCp{cd2=pD(y=juZiEyZGknF5L``Nx=( z>GouExk|2!EPfazuR$ztb_Rdy*)#W|zXMD6A7Yr%&RWtREvsB!q}H zEjVrgckLtYdcuO26&A=8pGDlJAp!>7uX@)dC=0s-S>ZciV{|1rMJGB@_#AN1rq{MD zQ>h{IA&Y03vB#lkya?XOjM)a`JU8Rli1B!46iI8`E>TJh`yiNhC&G88$lK(WH;mYS z33g`8G75gz&3FPa%G3l^$zS$0&Xit>xBiUDVmUO(37>6O`BS%|n~28?o@|4sN2SXw z_Y=>VwuGdrE&$bbeA=SLEEB7?6Y{@)jj|+7i>>*19Nh-5Q+6++0-Q%Q!yzJm1#=5S ziJPGpF`Q{KtZ_4Z^d1=g$+i#)o7@bo#PFuc5OXv9oEYfQi>+ke+gwVnCWf^pgU`)S z4Tg5OnkcZyO`S^ATWso&+|;2&rB#Ho&$Di7Z=!lY#oP}b64|jnL+1xP};9jZjeK(&0j4a5aM0&2R!S zxEf)Rn<3WbYJ?4L>Q16MjSzEFpCGE!2n8^gVV~7Rbv43hH$ycTq!DO&lY7dY9_zB= zgL;h4d-YzM{$Jmo_l)86YA-3y}a<}JY#aXrG|dfvZSHES>KJ0wJJ z#C|6~md!%k#LhcbHK>NrKaMb!a=7-LdOyXgIO!mu!`!QSXB2_R0JR2v5TXsXAbMwlE}&Ell0CFXh)12S zpfm%y5tD9+-SG!8FBUf^^0|*F&9_^FuEM*KidgVd3#`DssyH}R#of$rkfB^HKoiwS zcrEt-no%Fx2V5_3gFvG?m3hMc;ZXRt5ou{;N!PIkYFDdn5ZE zD4;hEuZpeR<8q*vKqU2%OVqy-Vhuz0)#}H;jPBdGc&!ya4`YVfGiiNhHn=zY@yAx; zmnfip0T{DfjB`>LR}vTtx{abe%i1C^wg&fzaUGx%uIa4%I%x2`l+YgjhXBl?Gr zBm*A6%OHL~Y=S+=(k{#LsFfj~_6m(UEY&V6r%yOnOH#>b`|B6U;vfQVLo zB??h!U{;9!s#9y1#}>JZ_zAlY@#!Kqxr^w8p4`3LJ&I}DmNw#W0@~}E!}bVs?_eG> zAI|cd2Y4E(PsIxC@bbV3z~8c4ZSgeaF7~Tkg;ksX0S&k0g(B_k+%>Qt ziu_Iq?J?PI(}snMBkvrMN5@~5Y*Fpf7yb}?#>MtoF10OhE5=9hl(!3CEmHO5LxB{0 zVx$L;D=o2Mud+|rBU9}Azb6ECc9?bm z->T)Um}6rSQv!o-8AzU@Cov1Dfa3l7kll_?5{b>ATPl`Nn2F6qp?Gx8PtHfjUVO!+ z(WhiU+KtC198JzwxSPyJnw<;HDq5Bop$})lNBIWN%CddW3|UYb91;xI_#$~ol$O<1 z;>|u^#Fy9NEugpDDq6gKLddd;@?zP$xrTM8wPOt=)5+)Iu@P>K0!bQea%;2^6_x-> z^`;s^TI=7<{(3t)AM~_P=w`B(-K`r?lyBA3M1VGGQcDbwu=;l(Esx$cA+`>8G`@Ai z^WJA-4|2+O?G_Yo+AHSPt}n>4gk42#rnMNL>P?|)76f9tfYWOGSudb^8QOP`KZ!cU zuYig=mV|)l!lRwNUpgbH_I@A3gv*Ivr7R$Z=${)uuWMn(tjICj@3CBQr1kDvg5Ciq zKkplM4Vs^kExU?E9^Lm3(KUsyX>^y;?2g`L2iE#VK11sycFDs<)e{@8m!7y7ZAr)J zLVdOrQJtKiHV}1+&qqg9(}Z$&jq|w16ccN3ccjbOt6zrQ(=2PVfj5@5!yy{h_R$%0 zHL+Xd*70ka{6;Av%i70Kj#5M~Yn$DQ`~x}DFKc(W?bb?+smt1! zTij#dGMBY?Af3j>UA`-@Z)bWNKLWgA<5wWsZDY>@mmi!B26&@kV^7kv;iPB1Gtk2^ zH^-bJ-Kl&JIvGyo=Ya{Q@+n~9RDLH#l*p2s0&MaX-gdi5h@VkV2?u z0xkJkVmEQuR$Ami|9C#eXT5^@Aw?}Z%%60+zb*ag{zaG#(aOd?Wgt)5PfGWsop-{p z@C18g=JIH|d}*K1yYp?(kLB}MlRc%nRIw3IM%ROP&u|)KE?ytPX^;=LewH2Cv9+_` z1>3MNq$js+2#tg2yhvsadYqff&vL}rhEZ0HC`gw%^2P-%>F`vnoNb}AD8907au~%| z)}l8NU8hkRqr5ihgK59^7;dXFjB{du-ubIfhXHhr@8uW`+fwDQ8Vp~;21Y81vFChW z6AzAQkMxtTMGE4RAt64|Eha0B1L#U9i5a028<4mKGRa%h$|M40cEX=@o+v#uBt^)n z(`F(9GQEIIaT+OgPHHUs)d*BBCtR;dEVTcjg|=U1=YZvcc(U?p`KciKy~ zVFD7&XXAqp9Ipx(j$yAHTSk^7hlEEj;ZliIx5u8EM~@HwImAKi%mLn}2x`fnMHqn2+o_#^QXAjAd)x z88#w=8E5a_Pj%9vQu!b~X*r6QO2&Ui{mcDQ$@!$8yj1c>Dmr&?X_qgRqzS}1u!ck? zcZB|6I}v_G5gK!3YCPJ4$CfKzOeubDQUs%DORW7Lj#hYJz&#Q#rF8l31;29=I_t&a z=uX%QZ+t*5PFdUUb6kY>mS^-?`rV7J-sMp5UXZ*UY303z`Hv~@Fy9SoNyr4IjkoqlMb(-w)6$vbT|b$ zw$OSvMyKIGFm35TA*FHwB-u95IdJ|2<3F6iec;Gk0@+4<1uI9F0P@=xpI_5}U7#nE zX>0*oYG`S9S?Z%9P79K->66&K`%z=~Umyv?O`aAdXYdjcQ?9<#Ar{Tdc10!uBBlUHWliUL5UF>I|0}z{1z3ap! zZ<*dz;1(cfY!DrA46xv*C2%LTWTte-6OzvT{Vg22Pi)HFfjgQO_2Q5Mre-i9v|8=s znsOg!Vpa%z&3v2V<^!A6e#Vx!Q7vO3cve)Od^=fs1YVV!$0MlIE41G2Sh>pNq9wMI zcTd$EJR8RwK}nzp#Qupc3VNEnI!lKho%T>0l2Ozk=7SP4Mbsy-U8la#E8+BVK9q9| zL=H&9c~G(&d5k_EN+v;?&WAGRNza>3Ac7R>U67OzGPV+;C~s^@%7o)aitQRHI~~hr?P%R$ zbb4heRX#$=QOe(pewrlz(q#F$&1h&HVzEte#FdzpTF7e<$!@KUl-qWUg>)cz=$hbo zJ1o_XDYwxKu3&XE)mWWcg6>5p=C3{hApynO9`8w7Sw9~m-@p5xw(mFOLA^LV&x`#g z8G8?5AI4a!mr{H-vOZR7FfytnX~F&~rg5%3SH%XRf2KK{Jup_9o`6%^L2M~epn-yR zeM(TD_2`z(7>|i&d;I|1 z(H}np9vtGt_~Y=*bIW;!cu+r)u);0jKS8y<$DV2NlPB?=_6zist}_dx1!it|DQYL4 z4!Atneyd^0F4G?|O0lf=D}c@PxK;0)Zuup2qgGqFi8r>n?+m6P5YPX{s>g4eHWSm9 zsJj;J$lyMRtqYFT!#`Y_4umEML1;I<GOSq znsQ%YJdg96_%?@GEX|U11W@ekoV7=HLYFd5FhA7EaSCPSFDC<1r)Y`YhPq&vp$133 zx`hYPwm-IQXmlTfBUrkU=mQ7ieLx_167B2IIbh}{zXEqwGWR|;n8e=!q!YpU%byj@ z%L?PpzxCs!(ta%5k0|bLVb+1Zl%b?mGkq_LUXS>T8enE(KX9pcq~%A(iKLkVY3~Rv zMO$XQ0nrEX=>#OR@|XVrl_Bxruh54ET4Ga_Xs#%7QAPVYqE#IK7w}}3zcaMW*YUTc z3cV(LzXe1YZewpt=6+PTzo)o!RQ11wRQm$fwi`EDc6g-H^oJNSUxW=0P^*xsKN<;2UXt-#netKj7K&Rv=HwDmSWm7tf(+ z{+9GsAWh-av}!73*%8Al{abf)`h-g~`5hQ+@}loM0}SSk^xW=AJgd_4TN+?gpy-Rb zsLe*0NZxX}#%6m@vkkV{s6Y16sVL-*$G`zRa^eN!*M-sJG_Y^Q}dVb zrrZZtdT10pNFU|v9-8|6?DrSQ}s@BSC4vA?3#~~ z6b(VWYYg?yOi^!uq253K)80~UPiqfZr+n|fl8Vs-OYRcd;L+9NH#}XhE4g1&x{o*D zj7K70iCxVTwWQaXK7_Bt=#yhOsD~J9zs@v-UuWtaYc*zf2FVtR)*Wh@@=* zh&-5VIP5ETT+xQM3nz&@)e))6qCv#8Z3#~z`Q#NGmv*$sfz=k!cDM$#%#9D{5e8d< zN$1QxXlQz*cWLa$KZi$R>sHR0zd?iu&E)hWy+QC8W7#_p4Dq+1u$=R4>?{vWYU~W; zFS{5>j``})H8$F)v9{1e5T5@ihHoS>UBb~O!O^$I_&EI6kv0A`{NXdt$hMo_{g)5+ zAeRb7gFYe=IQpFxLMWj#fR?(LY#V-{lpVW5%N-4?`DI5Dl5wURt%5mGc z#I48<k(t{)RgjF~+t^2wN4lOnH;nK^mY zfHi|W_{8L@!31YazTo|#fAnqrR}OvQHFnBlRH?s)&eq?foE-UJa^#cokdf%~map-J zEZ-&V;ScD;uQ%U1=9V$Hj`_+MKR#h;f4}nM7ceQHZ^fp58kRZ|b_pn`Sk{En%Bn!Q zCsga9@2PvL@e%LRxdG4Z;XpXx8Bp&TG@$+hI_vK6$@kW6){0FR6kp3)jmxMqG$?Lw!_0p%W%1!kwbuJoFctZrq!ry^Wc)!oQX zUyiqxMLms5L7&4bCyC1z;o#|u@{Z^M<%VGX5WPcl^2oQ;9g<6*ic08RQCo!%>U-ub z#An;3Ee6yN;s42+nXhRxhB9#oKJq?fPPl$Z<*>3L<$(qGhI{>xp@WNxh7TK3S0DBV z_?!HpaJ|2xsvJ4e@{a`n$k9Vs3n?-!AIca!a!5^JAwINEC0P~qfuf=!Yub!qTGO=o zSpFpcqQ&>4o%@kR&i#l>)cwr^>TmVntMuoGJZ!R1LtVgAUK%Pr zWc}v^%l*VnjA`}KcB)+%2>Ri~78)K+%Oy^#S%9un?xDZvK$SJn0pIc0em>4oh`I!R zXaFqbfknhPr@G#cX2I9>gA4qmX?JVpynqMI;TaJ2EJUZNsrA%Rp@qqWx?lkQ9JR-?Miw`Jvi#H>8TnOBD{GQ0 zp0C$JfK{0jv4G_1I-cGC~%#?UkltP@c2T-KS1C( zfu#ZsrPBC>2R;CGh|-|SH~7=}L`nvO-{lkHie1Tf^Xn!}%8@MJXz8>?bj6>c2)4J8 zFHM^xcqoTX($3Yc>GCN@GIDvuA&l}WFlMLlrSTi$I~+YS_?Nq(UljlNi@>}g%8xD( zc(uU!0#^!rOyCZI`ve;G;empp?ZRMf&0L98&giVw(^De%JZHMhV>qssdnR2wbGmKeHXB#R?8$(k~U{T0}pTNOzs{^B!bEx?cjTscsdCVZq{d4hSEtxMDKaWg) z4&gM6`NMS>b$Hk_rYT*`v&?x?*LI=7?u(fJ&7SU?Iuq5)JT4C%vLHCGHsr4i-hQ}z znC-AYzsgyCyESgwEdR{nDburjQ56ue%t3$!cy2B_hh2Ji>vOef{Q=!9*8)qmT zs5QH)FU1spDSnDaSNe$fZ6ypbC|xFsnaibl;!ym6k@B{~;PY44&sSz9hvg!Mbx|*p zKkP8&Gat*JHDfH9t4q1z`Z<0MScl8!Xl`d^{l`rz=E4pkr>?9rpexd)orKRRj&s6N z6UJOC1$C7l0am+#v`W`@aPd2ZI%t%fc_pP3a^hmw>nYZ|qB2;G5g@=X?F_NwLH&@q zb%6ne!){29I`(?1yt1BtEv!2x+E$=OZo61ZnQ=*e+e-)E)Fmue#Hok+nXXLiCs zQmEZ63akh@G=VQKEVE`JEL7GYnqn14G5t{OMym+AQuL4?D$@&YDu!Np@=UvSTG6NX#egh0^$Dn88v|{Gh%XoudevQo2brwgyj{9Bn zyW)RoFj%>uw2BOqW}LJALM{7YP(&sfJuvI-Ze16y3}GclKUpT$HSP9))_BE@YW#8R z*0r9zmYgL!Av{jY1c8=l!NWwWnXp5?Yf`p`9WQ6RTWn2A^a|#zq+;@KlDaF z)`kg+)FrJy566DMu%bin2gv%F0!=7b+Ax&Y&`NMxxh6lRIJARtNIsT3$}eWJh6F-o zh&Yv@!tx;~cW@bg+%Dt3hFKou3_C*oXj9{G^c#MJa))P<%XS}r#C9KXgyoOORDP1Z zMjoNuk%uXF)Dg-Zbr^DW-0iBp?EN6Mc~e=AO@qpc2G5+@QrRies~yXd{heAYrm!fg zF($qBwc%h{z+68OUG*(zf5+G%p(RNw3r}3sVm+1U?5?EQ_W`@J@8imgZBaeJIKurY ztC)Vy5w)c4i1Nyc3jE4v4L00p@0X(%EQ8R`Kkun-YU|J{X1vzpNBZ?tsu9vI&(e(} zTHsOaA0NJcu5s3zg}5qxy?{UYP9jkP_-nwWfY<*A@&mpJ7zI4-d&mzsx*7R% zk?;G+4|w|zkRPz-hsY1uxDNRNp9E|Md;>5F*zzOf2iylpKQcb}$H)&@59kH_CSVER zn}ACJ2d+ncz|R1qfUACj{D5cSA&Yf9UOxx)06qff1>6f*0(cdkCoKi+fd@IwfKLNP z0cYUBQXAlJ0qJMCC*p~h2XHH(7jW_h%664e)M2>m{|)Kj0OBQNViu+W?;hw0c<9en1ak z4nFYW1$-5-1hC-`$Pak(o5&AX1{ei=3$P7vAinox^#mWF2k_wA$PYN~9pnf69B?V% z+kZlSz~|bKA8;n#-fRQxi|=|^`S6#$$Pd`-edGuH7_bCz!9L^%Ecpxa1GWOj0O{(Z zfR%N}bSrC7LDm^39iO)*>-Yk~pNW6dzLiK^C_Dtx^IKMb(3pR9BGF2Zz3$7Le;w#y&>sYJ_*nt%AIm`h6X^X+`b|#$ zb)dfk`b3kSJ=V^@9rRqp>rcwbP~pvpWS5B*MWWt#-2$o`gohZ z9rPnXLRD^x2?ivQM{emUSoSH=FshXWR1ogZ@j5s5-bMeR zO)m%iub@BTqJP__F9Ur(#>_ih^sr4|2l}tOpl=7gAI8*7`S*g}0D6Bff42eFDb#cTGCo$n}a@GF> zr~aT{|DTCOFZ3fje@+iOevSuy(vykAW2St%$3^9rgZ?V$=VLsu^Aiyl(U*b#=ChgW zw+{3xFxSXbzwMxZ4tgg0>;=6PbCgWuLpRKsmVo{M{KVETXH7RU5b4(+^pCe@9)HGz zUb!ui_}H`$^3lch2mSJ2ClVRkAN1LvS5gMMeah|jSqJ*}x}a|dJq9`-X3+Vo9sk=4 z`e&ezG3DRs(7T~s&cK|FbhXPj$3M_d1)bK(HoeZtKOXdpK+jaaa?mGqk$)NJH-mnq zDZjyyzYg>U(EFQoV|>{T`eM*CjURhKzZ3L~^~ap`KS1Xrd)j{4PqG5s{-BS<+;yf| ze)d$GJ|6T+&@VFSa~=K5K@WpI$)smH@p~EQkAR-ZzUx4L5_CQ}qxGwDfA%HJ<6Pzc#@4?Z=G^mlCKB{+gx$V5-*@^y=pW%t*0rwu_u2W!gI$pkD`iqpSW)oce?Q z)GL|i58be4_#^1gy5w)P<@X1D0oEjca?#(k>El5kiM2>3dO7F^K+j~qWuRAKjk4V( z|9M;fI?xMVO(YhY^&?(fLc$N74WZajWUPj6Mv(PMfRjp;dP zY){YFo_)bTwr3u%Lsmjg8{|+mlP_;CFQYsHHJx0Ru4MQPg|_kc2m^}XYf(=xLoC<$ zT37C6c$!LDdsde4-5HWb2;u8=fo($Pma+9FA98J;68z$2s|#|%UQo9 zaG=0Z0w)NZEwDo10)h7kd{E$z1#T4hqQKV$?i2Wlz~c&}e1QW6juJRQ;B0{v0v8Cp zN8p13e=KmLz!wF+E^wc~PXr!!vXn1ypukZACkUJ^utFdk?Z5F)bA{52`U&~!4N}&6 z!B3L9~O7KSt_K2JXINay2U0^?lKT2%Hh9%>UBu)8`(cW}O7RNM> zq|{Viz3$W$*lYMP+FSA;oxL}RAG8V7dcj`9_5IO6%72XZ9{xqxTecPKD!|?&j?vzd z|LE*(E0S~rdyPm!9Z{0KN@U`H#-tT90H1d(m;iqrNErG1`077h!L`|5zga1bZL* zI{X;sCo4pcO{xCJC_Wt+$ zB*`Y?hhND2Wa7ASmwE<`56r2=%Ml|AFDV>0cxcfD>ds0cjxHQAcqq|uV_Aju4b`F2 zIe?*{g7fqpzfo3a71q>-0)=D7P8y8wNl0pLO}KDQ7$58yTv=`vQVNIo=UIj24K`D||*e71FFT6~Umd0Koo`#HNQEC)~BSES`X&VCN>=0Dy__xw5sPxbY4Z#Vx5 zmVSQj#&@^$b9OiWL`$DHaN|$1n&o-48{fmKJK1ZZ_&&$#Y3XwcCNam#x1w@>!HqAl zTJbHYG)5xypN~DpKfO7d)g1}W_`qa{w9&)Y8FmQB7F8FWJ*RRvp6g}AM1{646a2pfKSA&_ z1n)o3%b05fKVR@W2Pph~f~Pa`B>&cd3cp714+=hikizpBWzgu?w}}63!LJv7`ff1k z-z@s~7kr2CFTX&^;j_x1(V170^Q|u{Jf9&3{sO@dl;?EP2El(<@Sg~NhTu18IX5VNJ}U^?8-joNCWY62`;p*#->mS@f|ssSupvtI z`kmnU%pdSx!T?=MySjU)`$3mN!#3;zpqyx?;B zJKQ;~{C(ihLi}%C=_PjiI>7kUct{NC^i&7idZmmDCu0LMD^2`Aoi{d9iBpI z%jsc#(%;MMyCu^?!JjH|><+;{Ao#xyRQ!_!|AgQlJxAd?1iwx2p0gF6-#G&9HNorW z>faas_XV$?SHCOxPQm}VkCLP9*&Q2%>Fje3<9k>$u2uYJiX3kS{#n9*-i3-^*S8LM z@*nz0I9+}DFV2r=kh2E(0&peIHy#rCJ9~Rsg7%-E3Vzi23O`!pzr^^|`P(au7bXMz zIRpMv;K{G(*I(%JVk$@133=)5b`j%yShZp|y(pfLf&UiZ*>BgBuw3$Ex@t1;KP2+U zo#$mf-7ddiIj33Cq<;GA407Jjfd5AZe9sfo*Y_O8_psJUef9Wzx!@lYJ^5WOXnd34 zpOW^vnQLKLiv+Kq&-1%~pxq<*htBmfXFvXHSwCRBWkvH9UeMMvz>~i%eY}KGs19Gh z6@E$D;7=LwpJ%|Ig$*!@lQp9M1d(*P;D0#N%NRb}kGmUzXa9Mqgz-@ctn+~iv<5D@FyGVGOhnc<`*Ud{7&RNalMzZR}1Y!!B3Gm`JmwG%s$ntQOfNv_;Uq+ zrN_${ey0<6R|)<w6O4`%^Sc8-dFPUBpbHIMlvVSsOloT73iCm^)%WZ-`)1O7#k z({QSiqvOUt!Rzx_?~43SfG0im@0#hj-K~eRLs;gYxH{he@6g@C7J$&`(PQqdI z*9s|D$FZ5h?>R;B^E=j%zW{i$n^*h_D89ZX{PQpMa+==>#NF2g-+QXU^SfZcuLGXS z)xU42+xH{9_{XyNpjQ;02bC`RBJw zn5gCdf$^tVYo1Ve-H!DA0E#E)pYCOTJ)ikp_zQ$z%PA;O{Q5i_zng@dXEUBfxc&^! zfG^H~ze(gjCi?KZ^N?5vJjMBBzq%86kE=wLcu?eACw|pmc%Bq|RL+6&yRV?N3SOUk z)dul7x$q(jyT^4^_}W)_;iyrg zhC*^0CO_?Ct6gcFWC#TtEVYka92!7d z?SA?a8YA#93tuCxs?rSh$FOO0yS7HM>Cc@Km)}2O*0tkiPMUhH-(NUlXwfj1qdD-o zBYb*Wf7Vog+KfMyswlim@4{Dyv1iZfyCs$5i*+zklhsv>D&FCg zFRvz5=aP%vx#&CQ&ey@A3_cw0=HTyo`>Sf_y3x*;s{GW_ZX$m*R%hX_kka==&4#j( zuGTWXc1U%j#^O(inmKKxD<`#&Zf94OhmRaKf|VmrFy-hpAL?;h!A2)Fr;W#B_B7l{ zjcjwT=Io9clHOWXTQ(oDEfDZ}Cr+L;cAS4$;jqGy z2&QEV+!&pcKbB~FxO}k_FP8=I{m(9P*zRV>D?F$S`cV#l(A?FHo%fIYetgfrrWVw) z(hwd;x(mP~&ziF8IycfkY33As%u$a9GpCHB;bA5p-lj*0^l8UnQiPI#S63CDTdAV6 zttH*4BVY8n=(41Y%2QGzp8aiVGMXLO`8P1wDJ7ct@hN0Z+mVC4#P(Y@H5;z_c7M30 zsN^)+=t zBq~z*Z8NwEDGfn)n4=!UX*udxS=P`+R%ci9Bv}S5Yoo&;o z&r$mI$1LqW=Xe+|n+&6zD)CSAC^x4$i#w|w4z%AmUT=Gv3NHw>7!w`cIr2HfD92;% zn=n9I@wa~Muwj&%h^uAZGsM#aT*4d*9KoSJIS zx7UMiag8n%(j17+}*Qe_o;{X%VvDdW`({L^Kz zJg%y=z8))O%1j0!SH|MECTXTjI__?W zsK_o~=U)vR`5);=mp+fV2>btZovwiWSH#)r2=2`M`rIaczn3olMy|T$zt}Ez!TXUi z^Xun8b=YU6YuF40^1_i@D#ODf;1(DvU1?uezx#;6;e|B@uU7N;R~GhMdH+92iUX+|L?CAn /sys/bus/i2c/devices/1-0032/system_led_fld + CURRENTR_LED=1 + fi + else + if [ $SYSTEM_READY -eq 0 ]; then + # set SYSTEM LED to Amber + if [ "$CURRENTR_LED" -ne "2" ]; then + echo 0x02 > /sys/bus/i2c/devices/1-0032/system_led_fld + CURRENTR_LED=2 + fi + else + # set SYS LED to Green + if [ "$CURRENTR_LED" -ne "1" ]; then + echo 0x01 > /sys/bus/i2c/devices/1-0032/system_led_fld + CURRENTR_LED=1 + fi + fi + fi + sleep 10 +done + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/watchdog/watchdog.conf b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/watchdog/watchdog.conf new file mode 100644 index 000000000000..81f0b7b819bf --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/watchdog/watchdog.conf @@ -0,0 +1,45 @@ +#ping = 172.31.14.1 +#ping = 172.26.1.255 +#interface = eth0 +#file = /var/log/messages +#change = 1407 + +# Uncomment to enable test. Setting one of these values to '0' disables it. +# These values will hopefully never reboot your machine during normal use +# (if your machine is really hung, the loadavg will go much higher than 25) +#max-load-1 = 24 +#max-load-5 = 18 +#max-load-15 = 12 + +# Note that this is the number of pages! +# To get the real size, check how large the pagesize is on your machine. +#min-memory = 1 +#allocatable-memory = 1 + +#repair-binary = /usr/sbin/repair +#repair-timeout = +#test-binary = +#test-timeout = + +watchdog-device = /dev/watchdog + +# Defaults compiled into the binary +#temperature-device = +#max-temperature = 120 + +# Defaults compiled into the binary +#admin = root +#interval = 1 +#logtick = 1 +#log-dir = /var/log/watchdog + +# This greatly decreases the chance that watchdog won't be scheduled before +# your machine is really loaded +realtime = yes +priority = 99 + +# Check if rsyslogd is still running by enabling the following line +#pidfile = /var/run/rsyslogd.pid + +# timeout : 15 , 30 , 60 , 90 , 120 , 180 , 240 sec +watchdog-timeout = 120 diff --git a/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/xcvr-serv/xcvr-servd b/platform/broadcom/sonic-platform-modules-mitac/ly1200-32x/opt/xcvr-serv/xcvr-servd new file mode 100755 index 0000000000000000000000000000000000000000..c882ff8e335af0e1f1722c990166b8711f407307 GIT binary patch literal 31456 zcmchA3w%`7wfD{o0!R`R6cBY(f}j$T@GvOq1Q?ts(MXA{aQrscOfVx*iwy^+O*P|*65uvsSS#nTI$^YT6^y^=S*fu zVt@TkemU#x_1?IPRH6c>1k;~AL-&2L8+cxJEP=Th$=rP6|O{N3%j^nTq-62 zlZAgfQwYi{4ZDey zISx4%z*W2v@UX06$Xsn_P7S9kdm3uFyCFw@j`dL46^rU>H!WMTsLr#nuC^h#W8sdH zWeb-rDeyNI6tn-tM<#E(vyxToc-W94+tcw+Wl8jPm+WcuPW{&Zy!W?BZ4bYC#kAY+ zDW6ZW`X85LK3)Z(BK zcc$?3xfJ;SmjeH43j7~Z;5{ku2U7U|mlXULrNDQlz|V(%8~ziIe^0@`6O75?_FxMB z7gF%Ql7jyyDezCGzaUXN zc`F6}zaW#0|4a&eG=-i}3cNr+&smpug|-=)*tZt)|aoUYi#hYcWwuiHc36pHP>+JILml&d}%@a}+f{(!HsSrAtOskWguV4%D^kbvTC z@Z0P2H8i^F8mrxb+QtThMJfb(tAVP9T9Zk4AmDSc+UmxJ25)s-JyZPNfWLZ+*VE+o zx$6xbR#IbKZFRG#u50us<^*vd)5vr+Wp|nIBk2tYf0M7aAy6Zb&xY#yCgHE$+~BSg z9=8|aCv2dxPWYSsb&Z=vy|*4t2=)R2mhJ@Wygt!TTkRFKjnx70k|K9N1pRehFZ2a` z2uPz3fg#(fKDE^Q8W0T z#wJZC8eNk#UDK6>GL0mTH2xEU#yuPU1G8!;(MUI)*l`ejC+e`K2WJyKL)c98FMv;v zuacf_(D&X^MQV6XF@vw<>7c?-L=x(aqsxR>CYW}@gr_*@qsN5Ta|5FFn(*d%LZ1mw zw)GJ);j=XoaL9y5#*Jgxgr96+aj~|FQ>1$eU&&Lp2~T6OKJrZXsTv75(}d44;cX^- zt_eTigx6(3YzTJe^b8I5-G2t&W@$WU^FE`;kO?aCLzt4of(uCh{ z!e3>=A2i{wHsQNW_-gzquouQB0!P5AjHe4h!wz=V&O@YkB~&bGm9XEF9n=7gL&=a_1u zGNq~MMk_d-PHAegQ9GwUycua~s?kDDze8ziqEQ>C-=Z`%&1fE{|43i4 z(nB8sk^f6dQxlB#ar$SJrluF|;q(gmN>h`G+By9YrKzbz3pwqh z^c+gtIQ<}{scA&>IK7F|)Fh&U)Av&P3Q7ar$;jQ1!!XO(D96(^pZNnn1J_>7qZCgPz>JqT@Fy{BzF zLWEc!n0FCUY<#YUjsl%NO!P|U=iX)oM?cDd0%vH*c{FmXGwrzZrH=wL3~f`iw%jX7 z58H3OdHL-&A%fE?AsA^uz&0Mwng>+cyU$VkInr51j@>GPSp)wEa)z=qBoOP_7<~vb zbd8o-oZ ze9${!llq@MTtXbw{-mWTn&bKBRFrI?mO*r358Y%#5FEpY!77eWhZ8x0W^)+fj2)r= zDe?>@nM&PLd}=ynW|N)$Iae8_{7 zbXbrth44jHf#~N!LZHHxgQ24@zZL3f>q|rTy|t}nSOl&Ip`#+r+2I%py>zIFoX-S1 zGA2WK@I%rw43rqS+QRD}!TTt9Nzoyx;rJ2u&=r7l1wxUW~u%=2DJ;dBboYO*`($*^!6r!9wep3T=*s>s5?YOeRu~| z`*2NHjYCdq0d0;v`I1QdqM-cgjLFHQU2aK*tdvjLw2>Lx! zqd#ULe%By!2l1qZxZ5Cdhwudpk)|9nz{|-Q@?E-`1~yZ#@(zZ6llj+;BpW%Gp);+*5f?dmo7nuv#qPpnPo4pLfGxu zG>5A>FSFg*(N5gwWio4&&E!F3Iv(TuFdtLxf2C^w_aY#=bGn!s$@x64uy~xi>kr5x zDnTnX)~DX*3en27fe^D8QQ0LKULn*Pgy%d4#*jn9gC^9+^Tf8o*>RAA%ig_%jwdqd zJswL7BYC)>!3|x;Fq}F=exeq4T3gJ$Ku51d`O1KOvs4A_RdhT$&j+B1u8lnBGs2SR zbutXcq|8f)G7IczV#kl{qfRz>R{8WvS4t zVD}c_jQ-n!_U!D~y+Pr)Q4|3uCH_p7Ss=8VCi`J#yxMU((?Qc6^NnToi!JUU%fXv)J?81G|Z^t1EYR1N2jmyW<+jE=ej& z-6zVrM#?htY%ot`<{mN>dIj{)&NiZw+fD|-^ZG5xoS{w*0y8Ymp!0{nG#7TVx+<(j z*p?685_&~ia1K=NVU=;Sbu-!Qz#W<`bNiKGt7Wzmp~X6>0@KLCBU@zOJF(b6rL1gI96cefbu2Pui0rY7 z1WDwo1hu_Zp1Z*#`+#rUtonf0crtqy?)@2!1FbD9O8aP<3wA_2?!jJ)YJn-VuiW_evGV8G}D7ecgF*^<5Q|yp(J^t8N4&>I5EjFh+x0E zBAE_Vv8F=atT7iMB;_x!rsQYksoHPsi{FluK{>hVcp_rt-E<7`{YSDl#LbeNs6Q;EN{S;DJ<7f7_nCAj(nQ!(pq?`L{v$H zQQS6c4@9s%&`0Y<4BM(aG5L3f9gz^tlw?7D1Fpa(Mr>Z4_sP}y(#T!xqTySi@(seO z$b{YE+n2OQaTjRq4G%(<5oP_jV@f^d8V*A%(o3S}%!@=&pyq5mGHnO1l=0Wt|sd#RL- zMawCfqMiiEehG#o;C>e+nikA6n#um*}=Ys1{8 z@-zlLnzP;p^W0+{KrexHyR&0AZ7`y}Z9zT`&x5p4U>8$#9D|3c0z>pN>@aXIC|5|x zm597dW$K`U9_0dIeqo$juNNF?&qq!0m z6Y0)p7HxC;7Wsk=&QLZI?&_vm+&XlIoY~#>Ji41!(`}y~fJg_=$*?!jz`oNc`#Wf+ zou87(yHSfrRNiKfx~v{8C6E3Y5u{vG{-Em`-Z=wD>vqAgb|Wi#6H=Hse}Fj_b!2i*ItdGN$5}MmzMC9pbH7vvFKL#PyX!T0 zCx@an9AgI-plXckK;@C7J1CZzBsorn%ZJf(pE3>CZ=xDXt}Lpbm9TkAYbeHwDDK#I zIS>Z%hlcvW2&t##)vusT4)3;7^h)vR+FyvJ@?46=v0X>do*hP83@=@GjZMJS(2KF2 zfdy!u;ZYv@Ulx^0-f=( z_mMXd0_sg=SGgHP*;T?8FVPNKy*v)zxT}nQ2ilFnt&8dx4{ljtFb224LX>OQA?oI| z6Okog2vKLeKa@u`sXOv4`QSJ=uuczvXWk&E5(mJavu2XizV%pryOw<;jZIRc(V@2u z79xDTq2MW_D;~~}(do6$OfDwxjG4(6cEpHInc)E%NwVnd({`gz=;#cEE3ux$`1#VI z2;4O~>UvU5lNOpA^cmq>2DA~rpfM$Qtv^{ro`E@8TH2ohYeZ(UKNOJ%*qmufP%aU2 z#0#~c5d<+LoSU%SjiPXdGk==B68G%-!ZYR<*{Bu`VHf)D@Qlmjsa4?_*B2YKrQsP@ z#Z%XWXUvSJW`$?u#8Xp9TQ}l^d#rK~8|Fhn?D4_+UCO#$T1WfMda}?a21=+YXLZu$ zLcaVDI6~_tV4tGPOZf78ba??^ev2;Clm*-pq0RnKFk)1Iv*dv8PJhPT8<$41oig(- zS?;dKBy+ejB6ra9d9bBQGdLmlpSCg;_Z2dKx&wwupuR=vX((hP zm0(+!P4`Z;sVrruDcLi~*w|#LXH&wbFjFAIKORlk7+6fg-;lxs51rSnAsKi10VP;^ zUcthVdCgaX*(lHNVBFb5cL|!)2QF&Ej5eIrSU?NH;oL{Bp{bkco`I?bq00W`72(bE z$K5C}Ob&8)(W7#hHZ68UXvQ=wYXergL>qG@*+2eDGGE>p`B;@?kY^X?q93c0{74CZ ztV-gO!sD+b%a!1`D~V8oDJseB*Q-i0C83h=SgYy>4L3AE4jYqx?l=Zo&QoK}wIon6 zCdQ7+9yRZ}09%b{h+LnuqCcc6M$;dvUDyVkgl>jwc*k|h`2cFaoGSgc55qx+qo3wl zXvHFOCGrmh))DHqRGvhfGImj8*qjH)NkZ_R!rMSdZ9jO8S`PL}F*srCv6n0QS-Eh) z6pwFbInI87jmaUpJ?0p?n(mWDc=yH8cL-joeUI6%Ls5Bz20_ydFO#uY%Q$*X*th?v zd3#M7dI{@@e9%M9?Btc0GMlI7ZQ$fd9iuWMM(w{xv{>~m@Fe;hIn%>%dj*nCO!TI#!bC5E7H*n# zwviB*&!=#urgylPIf$uYdEZ)u+TI?Fv^)B-PYFP~w*BpnGvpp7S;!9N2beEc4$+#y zhWjacv3~FGOglREP|L~CP`d-Wos}o#_QOfcQJ=wTMCf%=Ym62j0d;3@A`D@A-(@V( zS;d)9PkZ@^cE>SLkF^uSNOhDMWV#6I4B^7iFs2ke?GAm57J_tlwePSEF)^k=$Kf+$ z$u9%D2iOqJ^m=&Pp(iY`{wm>D>1F5jqG{ITf9~N3!FuMBB()!Czwj07Y@SHX^}-H zPht7t+^4BH(Tp+LLfeLqNE_ePY`#5`Zej-U_0ya!5<#|*s~*bL25YWv0TXHKj_e|7 z&fiSxB`9jW?Rk>6MbeByv4u{=GhB&U)o0{+mGB zV}FYftrB6%C#o&ww7r}fQaqEiL*0sP0o3_4T&g7o3jclBen0mBd1{$+;ihR;)xA|B z_i1~2?$fCK!3YHjHvd&d$2z(A5KXRfu$^{_^eT)@)^t1Gp9me}G_hu+iNeqj<}SMC z#tor&PT{ve?mkRSwx@$WoRWUPp4smB;5_84cFL6FebcR~wn$pLoV~5}X{h!EvI%{|?w*D>Aybm=)x3BbpRk=@B4(nK>^P+mb+S0S*b`B{+fjB}BHN6LSNE@toS{r(Q zHFU(LpLVuAm*!kP5PXXsV7+f+>HVb}OCKn8;SoRM`M!6b!vICkysAfB)A+f0Ar|4; z|3#aE{zbLL)r&mdZFtb%zo=+oVd3K9MNN%(H>1c^;%f4F@xDa>kr*3)tq(6~1l)n3 zf9(AA{;gxyU*G8Qd+UgOZ2EnE_I=F!bxp9~6^nLMZ^IiKexIxU(`;-k_LjSfmYD)J zYJ8dB6fk9I>~b=2W8;qpZfyMVz>SSx1@63YTCD2T4X)xP@j#{4Z{Z&isBy?~pvK5= z1Zs@@Mxe&XZv<*o{^F&s#l_=@ljI+NoZ@n0i<9IZdz>Wy*yAMmjX14w*VcJGwm_pz zy|ZPj_xk#MJAzzbclHCg0)#P#?W>wWG9KfiG1v(@@-)KLbmw^7eYE)}HqN4>a{zaRcy!i#i8$`TR>FvdMDR^rA z^p+&5nO}Gt)TPJ7&Mz~@`GtwZno=~5^29cSDq9n*L#f3*p*Jgy%7NNxZCTVT=+3CE z;?9b~RfR=278cqH`JfD`%fdpFKK7?{RYjRizLLl>yRE{({6?FN+gC3~+RiT$=hyZ5 z{QPA)_(t1w`+T+A+;x80M%T%=Ms2}{tqqOa8*D~l*|>c)p;_d6YztW$7lz+lALMJM zl9MV$u%VjX4Ykcr5JUH5bSs!vp!-OSlM!rl{@k8;A>{8ciHxWPLR`GS4y{7WRj^n= zyMhlYc&CE*EBI9fzpda?3jRdFR}}10@aGDC>RM^r3O=mi^^*Ry zg6}F=xKQFBRPeNd-&64X@#Yc02r+ew6k|GQZcB6Ah512F-|r_@68i_^2O5A0l69wiWKk-yqo%`DDo?V`S^XR1b=)<*Unzkc>`N ztz@gbe6?AmU7B$dJ^FDac-KB3i`|dwlRuBet_OVfBp!|gjQk=Ndjin^LM(O+@JE3C zfS-9W7R$sg){}s90XM%Ci>(HH2YVA9z(1UZJfH{rQBMG-{~q#yU&ZETKj6#Q5Y5C* z$+NiCHy6;48+5Aye+B3Pd=)nzcL56A5PyQ`xT}2(@EBk};6yy-l9`F$(Eywa*blfG z@Hcoi#{+m2PfhItEWvYMPXK-s@EG7rco?l8F!No=V=emwz`1~P@VHtX;B*zYw1?J- zv>kbAmtHV2dr#WLJi^bx|K6X)V%I7j0?GN&oFA#6bS72L3LzgM16!X3#yrugAS@znM<9aFF~i;Ge{! z40jX4@NcbQ{|V50L0@I2%kZ-NG0^`C`pstg4i;y6Kj<^@_)4dlp8ickejr%_==5OIb_?BS&^@3(3VOAL{(wQ>1^SDiFSC?ikx_n6fc^&h zjl~vvfk8h8`Y`&B$1M84%KBFW*AIFt`V}wHSLWn>DczAX^NSgd99u`GBWM1jS4|)*J5l3g9opG%SY6fzd zjzstci8k;%6~hGzUpUpySM8VBA^5<9(|oi~vNP29CY9EHYkSm1(V^4WbLRZyDSq7e;I#Gw!v?2+oNZ^h|6eEl zJ5!1FYNkp*wki0Cf?rqg`wAXV@VJ7nDEOv=?<+VVN9wy+!FdWUQ*e!f_b6DS;5G#x zQSj>ueqX@@3LaPR6$Rf^@O=d*7KN5L8ew<-9Df?rqg`wAXV@VJ7B zar}GJx;>VtcC|&py$YUCa9F|l%Vj>-D~NhV&(YwGaEYgDIwo9YCt$Q2UH=*RF;1!M zXjQsB>iVwna`alcTij{_f)%8_iCxQmp&6f0Ug( zrC9fu|0p}tlw#cvZ&B@GuYx@aiW}|BS*T!@g4(aq;&!28)Z>qq8!sHq&P7V0Zb#$Q zulYx_qsKknjT&CX?tQMV&4H(ofJoy(O%-HyhqU-OS<=L*HB+mV(VFC5K| zO)1pvXuSG0|7douRE)YE9aQZiqM&VsojEELY*lc-f@8IFm15NGNXv~Ej+URRl|tQ) z#;afRk7j4CV$|(O%Z(R~W+z`M)a_`z`ZfP(cIGL@%eBDAgrnKHM(Ne<=wq6p_ocXZG9}|vdXMxEM@zO!4iV^m(a={{LCvP2KmW=Dq@%2Xj;b5Ad-?nPijkfu# zy_;&?4Ynl(%L|GZ78Nd#SBb=uf+Y)!h=vOx3jEFW0rw_A{2(R6E&7UY#59Ql?9zJ+ zN>`RG47fL|)aHg@!KPp>e)G82BMK;m`*vGIfv33v`XmhaBxRe|=ck|RWHyy>f#&np zxk*4>HPr<~0sls40e&A8*EL9h*66`~Pf_6A;;O-~b9!A{Jdo8XDdEBmC3mxw(AN)E zgALl<^|jS7-3Wy^6|fblag*OK3aT6H>(%o$Bf@S%WKhu4?Iw)8q~E}tlN6sJRwTt| z8v8wFWf}NI?$)II6NKImvhq(9$@Wn)u)C!9U#$F-gx<%o;wKBe-($s35qjUtioZZq zsQnHreyZ_%=T>}9Ctoe4T+`)YbcMW@3i8$k=zY z;-?GxIkdzhL(IVMlPAMpEcUAXGqX&FxJ2lEH7g#YZh102vqaau$?zjbHPkfxTIw0@ z3(UG{y^@CA&qV)e{7n~FWhCr(7AU+u0bi={tqJ%~vi`WAl#CUOP6BT0u|4^4(# zGX6_}Cw_X=o({dPS&)LC-ee_zwiinNyIBhN`xO3!!mm0 zD*Ts$Cx7T!bUH5Nvk>1_{1L^^_Xa@w55-SUdDEf!k0}1%6-#`CsY3ix@zW#Hbm(;g z&`IOd$NbYodzqcsjpJ>`kF1BpkSxw0k^y+9_rWPe2mOwFT9S4re>qy5dZvnBUt?!ZzITSJGr&(1vjqL}2OWA|l9@sHnS!1!r$f)XE&)E7p9LxKt5V?a zQTpvlzusrutnkhR{O5tsgFm|zo}I!e#QI0}|6gMKRPmbyc4p;!dANE~>0h0o|2gJo zR?F$l6!>#WKmA%29el43a0)V#EIvz8;Mb?X(=W+V{96Fp9N-b|rqI0gO^Oc;~-vkZ8uZ(CG-gE$|bVE(CM#S%NG zt0h{{J$@?p#PP0~^~@9%Dn8u&A@fg4KmB?b9oc*q;>$|^ua?>w!}k_(^#tP;lL^qT zn^1hVtNOD^(M|$yGx6!mS5xTuGw{>WXNv5E@%o(7|813Dz84B*lQH$4hW=U4TXcM8 zF@Bb)ONiSIz>}YPABgX%Lyv>;+PgU1sPr@?=-H8i|8b?CewLOFFQ0{YDh2;67<+OzHQw9B~CmmrvT4EqP3#HQ*Ed7Nl;Y1_SXhmR^YmlY210&7 zgV){$jvw1KJ?n;NCONuw-fRk~ozg_p^|f6fKUE-PL%t#Sc230(AN7@y-h# zWF?ddK@ZxwHZ=#lE?%9-Ir#}Y6UFe5Sm@zF%C~fCaq$f|#H|vYAKx?4OG>PC`S_lR zVR;GEtyx!E?r=HoTuq-x;S$!@6eA<39^qR3sXI%{%T|HQMBy*12-j_E?^;>9)^*pK zHJ@;-cdaj7xz<7I_*)&-{vem7pbWU`{hvlXsorL{o4?Va9y52zr|7M;#BZTksr;dk z`X(##e4m7&kjw9f#KY56+u)MnF(S@v{IQb+6h1N&{~}D>EPZuEeICY&WW8||eUXG7 z;igw7*hWLJKJJKo(ZN;i#wS`_o9f+7!sX>UA|q(HLJku-(QEZMzFC0|t>sfRR)6#- zRIJ#zF@C^R>q+vd7^~dK54%|D^7}7VoMB6b9Wi!MT=-isR!%N&cfg9|Pt{maR*l>? z3{<^)hpVY^yVr+~3vU6SKDs?t=@Flqv63yZpw?g|8-}o}h_|}@Tg~NR5b>Ia#S8R; zNvfvXgFQg*b6f%JKN`|fwcEc{$ZzeW@PJk7mT&nM67768)>*~ig1^xvUrC6Yk{wIg zU1&8P_#E_mEq1LcN?Y< ziJc`6`>AW)$aXD1tEJ-;{}k6qoBT=_9`NT^x$xO4`57xKpL|cnic{0Hj}7R49!<@$ zog$BPyMhwTk-#{sX}poX8dsQ#8}f6~?MUHyVWrT2@ZqQ1Wv* z6+b1)uLcP})!V53uS&NAL(h#e;OC0z3d>eLFkQABcOo?f|60B^-Hw#N{RRdiTN%W% zj^m`|XG*fT2M}8-hP=KX(M|$5^z*1PC3Wa)f)C&yx3&!b^?i#UD?_B84(-48Q^T#G z(X*vGt?zH-VSY|W6`$qzz{pSSze0*r}n{sR0b%6}0!s#7Xl#(Jett^X450I1@Cggin3W_f-8r9#Q;a@72J>O#Y>Cdljc zc8}WdUN>J$N~q;D_VEOH{rvOX63L;$pxHUrMgkX|_&2vdy?;`u=~eB2y#Ny&zEjwYX?Yx{pG2Ps{83T>5*w^rP@}==!Ps*X8gg zXlDERe%RhSSj?#JG8Ok<>lsLp*Z0jjm3)P=pGy90g1oWcSS}@Ysdk{{?fOE&4*|&+ zoqv5FZr8n%VMy_5VAmH4(v3KBu`mIz<(DVmb#^qI2D-LwX8mtvKU*^@VnWhV_s#Mr n?vttcR5@{6hJU)pq~ospFKVC3><`s~fJ66#G9~k>uL=GyV(dpR literal 0 HcmV?d00001 diff --git a/platform/broadcom/sonic-platform-modules-quanta b/platform/broadcom/sonic-platform-modules-quanta deleted file mode 160000 index 2a300312a084..000000000000 --- a/platform/broadcom/sonic-platform-modules-quanta +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 2a300312a084cd96cdd3657020b5e207adc04559 diff --git a/platform/broadcom/sonic-platform-modules-quanta/.gitignore b/platform/broadcom/sonic-platform-modules-quanta/.gitignore new file mode 100755 index 000000000000..2615f7f89bbb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/.gitignore @@ -0,0 +1,37 @@ +# Object files +*.o +*.ko +*.cmd +*.mod.c +*.symvers +*.order +*.obj +*.elf + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su diff --git a/platform/broadcom/sonic-platform-modules-quanta/LICENSE b/platform/broadcom/sonic-platform-modules-quanta/LICENSE new file mode 100755 index 000000000000..609b3082d11c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/LICENSE @@ -0,0 +1,16 @@ +Copyright (C) 2016 Microsoft, Inc +Copyright (C) 2018 Quanta Computer Inc. + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/broadcom/sonic-platform-modules-quanta/README.md b/platform/broadcom/sonic-platform-modules-quanta/README.md new file mode 100644 index 000000000000..bcc06271904a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/README.md @@ -0,0 +1,2 @@ +# sonic-platform-modules-quanta +SONiC platform folder which contain drivers for Quanta Switch diff --git a/platform/broadcom/sonic-platform-modules-quanta/debian/changelog b/platform/broadcom/sonic-platform-modules-quanta/debian/changelog new file mode 100755 index 000000000000..77d3407ec943 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/debian/changelog @@ -0,0 +1,6 @@ +sonic-quanta-platform-modules (1.0) unstable; urgency=low + + * Add support for Quanta IX1B-32X + * Initial release + + -- Chih-Pei Chang Jonathan Tsai Wed, 20 Dec 2017 09:26:01 +0800 diff --git a/platform/broadcom/sonic-platform-modules-quanta/debian/compat b/platform/broadcom/sonic-platform-modules-quanta/debian/compat new file mode 100755 index 000000000000..ec635144f600 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/debian/compat @@ -0,0 +1 @@ +9 diff --git a/platform/broadcom/sonic-platform-modules-quanta/debian/control b/platform/broadcom/sonic-platform-modules-quanta/debian/control new file mode 100755 index 000000000000..af058ee98f2d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/debian/control @@ -0,0 +1,12 @@ +Source: sonic-quanta-platform-modules +Section: main +Priority: extra +Maintainer: Chih-Pei Chang , Jonathan Tsai +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: sonic-platform-quanta-ix1b-32x +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as psu, led, sfp + diff --git a/platform/broadcom/sonic-platform-modules-quanta/debian/rules b/platform/broadcom/sonic-platform-modules-quanta/debian/rules new file mode 100755 index 000000000000..45bb29742a1c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/debian/rules @@ -0,0 +1,86 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +include /usr/share/dpkg/pkg-info.mk + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +export INSTALL_MOD_DIR:=extra + +PYTHON ?= python2 + +PACKAGE_PRE_NAME := sonic-platform-quanta +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MOD_SRC_DIR:= $(shell pwd) +MODULE_DIRS:= ix1b-32x +MODULE_DIR := modules +UTILS_DIR := utils +SERVICE_DIR := service +CLASSES_DIR := classes +CONF_DIR := conf + +%: + dh $@ --with systemd,python2,python3 --buildsystem=pybuild + +clean: + dh_testdir + dh_testroot + dh_clean + +build: + #make modules -C $(KERNEL_SRC)/build M=$(MODULE_SRC) + (for mod in $(MODULE_DIRS); do \ + make modules -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ + $(PYTHON) $${mod}/setup.py build; \ + done) + +binary: binary-arch binary-indep + # Nothing to do + +binary-arch: + # Nothing to do + +#install: build + #dh_testdir + #dh_testroot + #dh_clean -k + #dh_installdirs + +binary-indep: + dh_testdir + dh_installdirs + + # Custom package commands + (for mod in $(MODULE_DIRS); do \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod}/usr/local/bin; \ + dh_installdirs -p$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system; \ + cp $(MOD_SRC_DIR)/$${mod}/$(MODULE_DIR)/*.ko debian/$(PACKAGE_PRE_NAME)-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/$(UTILS_DIR)/* debian/$(PACKAGE_PRE_NAME)-$${mod}/usr/local/bin/; \ + cp $(MOD_SRC_DIR)/$${mod}/$(SERVICE_DIR)/*.service debian/$(PACKAGE_PRE_NAME)-$${mod}/lib/systemd/system/; \ + $(PYTHON) $${mod}/setup.py install --root=$(MOD_SRC_DIR)/debian/$(PACKAGE_PRE_NAME)-$${mod} --install-layout=deb; \ + done) + # Resuming debhelper scripts + dh_testroot + dh_install + dh_installchangelogs + dh_installdocs + dh_systemd_enable + dh_installinit + dh_systemd_start + dh_link + dh_fixperms + dh_compress + dh_strip + dh_installdeb + dh_gencontrol + dh_md5sums + dh_builddeb +.PHONY: build binary binary-arch binary-indep clean diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/classes/__init__.py b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/classes/__init__.py new file mode 100755 index 000000000000..e69de29bb2d1 diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/Makefile b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/Makefile new file mode 100755 index 000000000000..fd73f274ef53 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/Makefile @@ -0,0 +1,3 @@ +obj-m:=qci_pmbus.o qci_cpld_qsfp28.o qci_platform_ix1b.o + + diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/pmbus.h b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/pmbus.h new file mode 100755 index 000000000000..fa9beb3eb60c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/pmbus.h @@ -0,0 +1,387 @@ +/* + * pmbus.h - Common defines and structures for PMBus devices + * + * Copyright (c) 2010, 2011 Ericsson AB. + * Copyright (c) 2012 Guenter Roeck + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef PMBUS_H +#define PMBUS_H + +/* + * Registers + */ +#define PMBUS_PAGE 0x00 +#define PMBUS_OPERATION 0x01 +#define PMBUS_ON_OFF_CONFIG 0x02 +#define PMBUS_CLEAR_FAULTS 0x03 +#define PMBUS_PHASE 0x04 + +#define PMBUS_CAPABILITY 0x19 +#define PMBUS_QUERY 0x1A + +#define PMBUS_VOUT_MODE 0x20 +#define PMBUS_VOUT_COMMAND 0x21 +#define PMBUS_VOUT_TRIM 0x22 +#define PMBUS_VOUT_CAL_OFFSET 0x23 +#define PMBUS_VOUT_MAX 0x24 +#define PMBUS_VOUT_MARGIN_HIGH 0x25 +#define PMBUS_VOUT_MARGIN_LOW 0x26 +#define PMBUS_VOUT_TRANSITION_RATE 0x27 +#define PMBUS_VOUT_DROOP 0x28 +#define PMBUS_VOUT_SCALE_LOOP 0x29 +#define PMBUS_VOUT_SCALE_MONITOR 0x2A + +#define PMBUS_COEFFICIENTS 0x30 +#define PMBUS_POUT_MAX 0x31 + +#define PMBUS_FAN_CONFIG_12 0x3A +#define PMBUS_FAN_COMMAND_1 0x3B +#define PMBUS_FAN_COMMAND_2 0x3C +#define PMBUS_FAN_CONFIG_34 0x3D +#define PMBUS_FAN_COMMAND_3 0x3E +#define PMBUS_FAN_COMMAND_4 0x3F + +#define PMBUS_VOUT_OV_FAULT_LIMIT 0x40 +#define PMBUS_VOUT_OV_FAULT_RESPONSE 0x41 +#define PMBUS_VOUT_OV_WARN_LIMIT 0x42 +#define PMBUS_VOUT_UV_WARN_LIMIT 0x43 +#define PMBUS_VOUT_UV_FAULT_LIMIT 0x44 +#define PMBUS_VOUT_UV_FAULT_RESPONSE 0x45 +#define PMBUS_IOUT_OC_FAULT_LIMIT 0x46 +#define PMBUS_IOUT_OC_FAULT_RESPONSE 0x47 +#define PMBUS_IOUT_OC_LV_FAULT_LIMIT 0x48 +#define PMBUS_IOUT_OC_LV_FAULT_RESPONSE 0x49 +#define PMBUS_IOUT_OC_WARN_LIMIT 0x4A +#define PMBUS_IOUT_UC_FAULT_LIMIT 0x4B +#define PMBUS_IOUT_UC_FAULT_RESPONSE 0x4C + +#define PMBUS_OT_FAULT_LIMIT 0x4F +#define PMBUS_OT_FAULT_RESPONSE 0x50 +#define PMBUS_OT_WARN_LIMIT 0x51 +#define PMBUS_UT_WARN_LIMIT 0x52 +#define PMBUS_UT_FAULT_LIMIT 0x53 +#define PMBUS_UT_FAULT_RESPONSE 0x54 +#define PMBUS_VIN_OV_FAULT_LIMIT 0x55 +#define PMBUS_VIN_OV_FAULT_RESPONSE 0x56 +#define PMBUS_VIN_OV_WARN_LIMIT 0x57 +#define PMBUS_VIN_UV_WARN_LIMIT 0x58 +#define PMBUS_VIN_UV_FAULT_LIMIT 0x59 + +#define PMBUS_IIN_OC_FAULT_LIMIT 0x5B +#define PMBUS_IIN_OC_WARN_LIMIT 0x5D + +#define PMBUS_POUT_OP_FAULT_LIMIT 0x68 +#define PMBUS_POUT_OP_WARN_LIMIT 0x6A +#define PMBUS_PIN_OP_WARN_LIMIT 0x6B + +#define PMBUS_STATUS_BYTE 0x78 +#define PMBUS_STATUS_WORD 0x79 +#define PMBUS_STATUS_VOUT 0x7A +#define PMBUS_STATUS_IOUT 0x7B +#define PMBUS_STATUS_INPUT 0x7C +#define PMBUS_STATUS_TEMPERATURE 0x7D +#define PMBUS_STATUS_CML 0x7E +#define PMBUS_STATUS_OTHER 0x7F +#define PMBUS_STATUS_MFR_SPECIFIC 0x80 +#define PMBUS_STATUS_FAN_12 0x81 +#define PMBUS_STATUS_FAN_34 0x82 + +#define PMBUS_READ_VIN 0x88 +#define PMBUS_READ_IIN 0x89 +#define PMBUS_READ_VCAP 0x8A +#define PMBUS_READ_VOUT 0x8B +#define PMBUS_READ_IOUT 0x8C +#define PMBUS_READ_TEMPERATURE_1 0x8D +#define PMBUS_READ_TEMPERATURE_2 0x8E +#define PMBUS_READ_TEMPERATURE_3 0x8F +#define PMBUS_READ_FAN_SPEED_1 0x90 +#define PMBUS_READ_FAN_SPEED_2 0x91 +#define PMBUS_READ_FAN_SPEED_3 0x92 +#define PMBUS_READ_FAN_SPEED_4 0x93 +#define PMBUS_READ_DUTY_CYCLE 0x94 +#define PMBUS_READ_FREQUENCY 0x95 +#define PMBUS_READ_POUT 0x96 +#define PMBUS_READ_PIN 0x97 + +#define PMBUS_REVISION 0x98 +#define PMBUS_MFR_ID 0x99 +#define PMBUS_MFR_MODEL 0x9A +#define PMBUS_MFR_REVISION 0x9B +#define PMBUS_MFR_LOCATION 0x9C +#define PMBUS_MFR_DATE 0x9D +#define PMBUS_MFR_SERIAL 0x9E + +/* + * Virtual registers. + * Useful to support attributes which are not supported by standard PMBus + * registers but exist as manufacturer specific registers on individual chips. + * Must be mapped to real registers in device specific code. + * + * Semantics: + * Virtual registers are all word size. + * READ registers are read-only; writes are either ignored or return an error. + * RESET registers are read/write. Reading reset registers returns zero + * (used for detection), writing any value causes the associated history to be + * reset. + * Virtual registers have to be handled in device specific driver code. Chip + * driver code returns non-negative register values if a virtual register is + * supported, or a negative error code if not. The chip driver may return + * -ENODATA or any other error code in this case, though an error code other + * than -ENODATA is handled more efficiently and thus preferred. Either case, + * the calling PMBus core code will abort if the chip driver returns an error + * code when reading or writing virtual registers. + */ +#define PMBUS_VIRT_BASE 0x100 +#define PMBUS_VIRT_READ_TEMP_AVG (PMBUS_VIRT_BASE + 0) +#define PMBUS_VIRT_READ_TEMP_MIN (PMBUS_VIRT_BASE + 1) +#define PMBUS_VIRT_READ_TEMP_MAX (PMBUS_VIRT_BASE + 2) +#define PMBUS_VIRT_RESET_TEMP_HISTORY (PMBUS_VIRT_BASE + 3) +#define PMBUS_VIRT_READ_VIN_AVG (PMBUS_VIRT_BASE + 4) +#define PMBUS_VIRT_READ_VIN_MIN (PMBUS_VIRT_BASE + 5) +#define PMBUS_VIRT_READ_VIN_MAX (PMBUS_VIRT_BASE + 6) +#define PMBUS_VIRT_RESET_VIN_HISTORY (PMBUS_VIRT_BASE + 7) +#define PMBUS_VIRT_READ_IIN_AVG (PMBUS_VIRT_BASE + 8) +#define PMBUS_VIRT_READ_IIN_MIN (PMBUS_VIRT_BASE + 9) +#define PMBUS_VIRT_READ_IIN_MAX (PMBUS_VIRT_BASE + 10) +#define PMBUS_VIRT_RESET_IIN_HISTORY (PMBUS_VIRT_BASE + 11) +#define PMBUS_VIRT_READ_PIN_AVG (PMBUS_VIRT_BASE + 12) +#define PMBUS_VIRT_READ_PIN_MAX (PMBUS_VIRT_BASE + 13) +#define PMBUS_VIRT_RESET_PIN_HISTORY (PMBUS_VIRT_BASE + 14) +#define PMBUS_VIRT_READ_POUT_AVG (PMBUS_VIRT_BASE + 15) +#define PMBUS_VIRT_READ_POUT_MAX (PMBUS_VIRT_BASE + 16) +#define PMBUS_VIRT_RESET_POUT_HISTORY (PMBUS_VIRT_BASE + 17) +#define PMBUS_VIRT_READ_VOUT_AVG (PMBUS_VIRT_BASE + 18) +#define PMBUS_VIRT_READ_VOUT_MIN (PMBUS_VIRT_BASE + 19) +#define PMBUS_VIRT_READ_VOUT_MAX (PMBUS_VIRT_BASE + 20) +#define PMBUS_VIRT_RESET_VOUT_HISTORY (PMBUS_VIRT_BASE + 21) +#define PMBUS_VIRT_READ_IOUT_AVG (PMBUS_VIRT_BASE + 22) +#define PMBUS_VIRT_READ_IOUT_MIN (PMBUS_VIRT_BASE + 23) +#define PMBUS_VIRT_READ_IOUT_MAX (PMBUS_VIRT_BASE + 24) +#define PMBUS_VIRT_RESET_IOUT_HISTORY (PMBUS_VIRT_BASE + 25) +#define PMBUS_VIRT_READ_TEMP2_AVG (PMBUS_VIRT_BASE + 26) +#define PMBUS_VIRT_READ_TEMP2_MIN (PMBUS_VIRT_BASE + 27) +#define PMBUS_VIRT_READ_TEMP2_MAX (PMBUS_VIRT_BASE + 28) +#define PMBUS_VIRT_RESET_TEMP2_HISTORY (PMBUS_VIRT_BASE + 29) + +#define PMBUS_VIRT_READ_VMON (PMBUS_VIRT_BASE + 30) +#define PMBUS_VIRT_VMON_UV_WARN_LIMIT (PMBUS_VIRT_BASE + 31) +#define PMBUS_VIRT_VMON_OV_WARN_LIMIT (PMBUS_VIRT_BASE + 32) +#define PMBUS_VIRT_VMON_UV_FAULT_LIMIT (PMBUS_VIRT_BASE + 33) +#define PMBUS_VIRT_VMON_OV_FAULT_LIMIT (PMBUS_VIRT_BASE + 34) +#define PMBUS_VIRT_STATUS_VMON (PMBUS_VIRT_BASE + 35) + +/* + * CAPABILITY + */ +#define PB_CAPABILITY_SMBALERT (1<<4) +#define PB_CAPABILITY_ERROR_CHECK (1<<7) + +/* + * VOUT_MODE + */ +#define PB_VOUT_MODE_MODE_MASK 0xe0 +#define PB_VOUT_MODE_PARAM_MASK 0x1f + +#define PB_VOUT_MODE_LINEAR 0x00 +#define PB_VOUT_MODE_VID 0x20 +#define PB_VOUT_MODE_DIRECT 0x40 + +/* + * Fan configuration + */ +#define PB_FAN_2_PULSE_MASK ((1 << 0) | (1 << 1)) +#define PB_FAN_2_RPM (1 << 2) +#define PB_FAN_2_INSTALLED (1 << 3) +#define PB_FAN_1_PULSE_MASK ((1 << 4) | (1 << 5)) +#define PB_FAN_1_RPM (1 << 6) +#define PB_FAN_1_INSTALLED (1 << 7) + +/* + * STATUS_BYTE, STATUS_WORD (lower) + */ +#define PB_STATUS_NONE_ABOVE (1<<0) +#define PB_STATUS_CML (1<<1) +#define PB_STATUS_TEMPERATURE (1<<2) +#define PB_STATUS_VIN_UV (1<<3) +#define PB_STATUS_IOUT_OC (1<<4) +#define PB_STATUS_VOUT_OV (1<<5) +#define PB_STATUS_OFF (1<<6) +#define PB_STATUS_BUSY (1<<7) + +/* + * STATUS_WORD (upper) + */ +#define PB_STATUS_UNKNOWN (1<<8) +#define PB_STATUS_OTHER (1<<9) +#define PB_STATUS_FANS (1<<10) +#define PB_STATUS_POWER_GOOD_N (1<<11) +#define PB_STATUS_WORD_MFR (1<<12) +#define PB_STATUS_INPUT (1<<13) +#define PB_STATUS_IOUT_POUT (1<<14) +#define PB_STATUS_VOUT (1<<15) + +/* + * STATUS_IOUT + */ +#define PB_POUT_OP_WARNING (1<<0) +#define PB_POUT_OP_FAULT (1<<1) +#define PB_POWER_LIMITING (1<<2) +#define PB_CURRENT_SHARE_FAULT (1<<3) +#define PB_IOUT_UC_FAULT (1<<4) +#define PB_IOUT_OC_WARNING (1<<5) +#define PB_IOUT_OC_LV_FAULT (1<<6) +#define PB_IOUT_OC_FAULT (1<<7) + +/* + * STATUS_VOUT, STATUS_INPUT + */ +#define PB_VOLTAGE_UV_FAULT (1<<4) +#define PB_VOLTAGE_UV_WARNING (1<<5) +#define PB_VOLTAGE_OV_WARNING (1<<6) +#define PB_VOLTAGE_OV_FAULT (1<<7) + +/* + * STATUS_INPUT + */ +#define PB_PIN_OP_WARNING (1<<0) +#define PB_IIN_OC_WARNING (1<<1) +#define PB_IIN_OC_FAULT (1<<2) + +/* + * STATUS_TEMPERATURE + */ +#define PB_TEMP_UT_FAULT (1<<4) +#define PB_TEMP_UT_WARNING (1<<5) +#define PB_TEMP_OT_WARNING (1<<6) +#define PB_TEMP_OT_FAULT (1<<7) + +/* + * STATUS_FAN + */ +#define PB_FAN_AIRFLOW_WARNING (1<<0) +#define PB_FAN_AIRFLOW_FAULT (1<<1) +#define PB_FAN_FAN2_SPEED_OVERRIDE (1<<2) +#define PB_FAN_FAN1_SPEED_OVERRIDE (1<<3) +#define PB_FAN_FAN2_WARNING (1<<4) +#define PB_FAN_FAN1_WARNING (1<<5) +#define PB_FAN_FAN2_FAULT (1<<6) +#define PB_FAN_FAN1_FAULT (1<<7) + +/* + * CML_FAULT_STATUS + */ +#define PB_CML_FAULT_OTHER_MEM_LOGIC (1<<0) +#define PB_CML_FAULT_OTHER_COMM (1<<1) +#define PB_CML_FAULT_PROCESSOR (1<<3) +#define PB_CML_FAULT_MEMORY (1<<4) +#define PB_CML_FAULT_PACKET_ERROR (1<<5) +#define PB_CML_FAULT_INVALID_DATA (1<<6) +#define PB_CML_FAULT_INVALID_COMMAND (1<<7) + +enum pmbus_sensor_classes { + PSC_VOLTAGE_IN = 0, + PSC_VOLTAGE_OUT, + PSC_CURRENT_IN, + PSC_CURRENT_OUT, + PSC_POWER, + PSC_TEMPERATURE, + PSC_FAN, + PSC_NUM_CLASSES /* Number of power sensor classes */ +}; + +#define PMBUS_PAGES 32 /* Per PMBus specification */ + +/* Functionality bit mask */ +#define PMBUS_HAVE_VIN (1 << 0) +#define PMBUS_HAVE_VCAP (1 << 1) +#define PMBUS_HAVE_VOUT (1 << 2) +#define PMBUS_HAVE_IIN (1 << 3) +#define PMBUS_HAVE_IOUT (1 << 4) +#define PMBUS_HAVE_PIN (1 << 5) +#define PMBUS_HAVE_POUT (1 << 6) +#define PMBUS_HAVE_FAN12 (1 << 7) +#define PMBUS_HAVE_FAN34 (1 << 8) +#define PMBUS_HAVE_TEMP (1 << 9) +#define PMBUS_HAVE_TEMP2 (1 << 10) +#define PMBUS_HAVE_TEMP3 (1 << 11) +#define PMBUS_HAVE_STATUS_VOUT (1 << 12) +#define PMBUS_HAVE_STATUS_IOUT (1 << 13) +#define PMBUS_HAVE_STATUS_INPUT (1 << 14) +#define PMBUS_HAVE_STATUS_TEMP (1 << 15) +#define PMBUS_HAVE_STATUS_FAN12 (1 << 16) +#define PMBUS_HAVE_STATUS_FAN34 (1 << 17) +#define PMBUS_HAVE_VMON (1 << 18) +#define PMBUS_HAVE_STATUS_VMON (1 << 19) + +enum pmbus_data_format { linear = 0, direct, vid }; + +struct pmbus_driver_info { + int pages; /* Total number of pages */ + enum pmbus_data_format format[PSC_NUM_CLASSES]; + /* + * Support one set of coefficients for each sensor type + * Used for chips providing data in direct mode. + */ + int m[PSC_NUM_CLASSES]; /* mantissa for direct data format */ + int b[PSC_NUM_CLASSES]; /* offset */ + int R[PSC_NUM_CLASSES]; /* exponent */ + + u32 func[PMBUS_PAGES]; /* Functionality, per page */ + /* + * The following functions map manufacturing specific register values + * to PMBus standard register values. Specify only if mapping is + * necessary. + * Functions return the register value (read) or zero (write) if + * successful. A return value of -ENODATA indicates that there is no + * manufacturer specific register, but that a standard PMBus register + * may exist. Any other negative return value indicates that the + * register does not exist, and that no attempt should be made to read + * the standard register. + */ + int (*read_byte_data)(struct i2c_client *client, int page, int reg); + int (*read_word_data)(struct i2c_client *client, int page, int reg); + int (*write_word_data)(struct i2c_client *client, int page, int reg, + u16 word); + int (*write_byte)(struct i2c_client *client, int page, u8 value); + /* + * The identify function determines supported PMBus functionality. + * This function is only necessary if a chip driver supports multiple + * chips, and the chip functionality is not pre-determined. + */ + int (*identify)(struct i2c_client *client, + struct pmbus_driver_info *info); +}; + +/* Function declarations */ + +void pmbus_clear_cache(struct i2c_client *client); +int pmbus_set_page(struct i2c_client *client, u8 page); +int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg); +int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word); +int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg); +int pmbus_write_byte(struct i2c_client *client, int page, u8 value); +void pmbus_clear_faults(struct i2c_client *client); +bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg); +bool pmbus_check_word_register(struct i2c_client *client, int page, int reg); +int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id, + struct pmbus_driver_info *info); +int pmbus_do_remove(struct i2c_client *client); +const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client + *client); + +#endif /* PMBUS_H */ diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_cpld_qsfp28.c b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_cpld_qsfp28.c new file mode 100755 index 000000000000..15c5369fd219 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_cpld_qsfp28.c @@ -0,0 +1,409 @@ +/* + * A CPLD driver for monitor QSFP28 module I/O + * + * The CPLD is customize by Quanta for controlling QSFP28 module signals, + * they are RESET , INTERREPT , Module_Present, LPMODE + * Each CPLD control 16 modules, each module use 4 bits in register. + * + * Copyright (C) 2015 Quanta Inc. + * + * Author: Luffy Cheng + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static DEFINE_IDA(cpld_ida); + +enum platform_type { + QSFP28 = 0, + NONE +}; + +static struct class *cpld_class = NULL; + +struct sfp_data { + struct i2c_client *cpld_client; + char name[8]; + u8 port_id; + u8 cpld_port; +}; + +struct cpld_data { + struct mutex lock; + struct device *port_dev[16]; + struct sfp_data *port_data[16]; +}; + +static int cpld_probe(struct i2c_client *client, + const struct i2c_device_id *id); +static int cpld_remove(struct i2c_client *client); + +static const struct i2c_device_id cpld_id[] = { + { "CPLD-QSFP28", QSFP28 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cpld_id); + +static struct i2c_driver cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "qci_cpld_qsfp28", + }, + .probe = cpld_probe, + .remove = cpld_remove, + .id_table = cpld_id, +// .address_list = normal_i2c, +}; + +#define CPLD_ID_PREFIX "port-" +#define CPLD_ID_FORMAT CPLD_ID_PREFIX "%d" + +#define RESET_MASK 0x08 +#define INTERRUPT_MASK 0x04 +#define MODULE_PRESENT_MASK 0x02 +#define LPMODE_MASK 0x01 + +static inline u8 get_group_cmd(u8 group) +{ + //FIXME: if group cmd change + return (group + 1); +} + +static inline u8 port_remapping(u8 phy_port) +{ + /* FIXME: implement by hardware design */ + /* The CPLD register port mapping is weird : + * MSB -------- LSB (word data) + * P3 P4 P1 P2 (per port 4 bits) + * For easy coding bit shift, we treat it as hw port swap + */ + return (phy_port % 2) ? (phy_port - 1) : (phy_port + 1); +} + +static ssize_t get_reset(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sfp_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->cpld_client; + u8 group = (u8)(data->cpld_port / 4); + u8 group_port = data->cpld_port % 4; + s32 value; + + dev_dbg(&client->dev, "port_id %d => cpld_port %d, group %d(%d)\n", data->port_id, + data->cpld_port + 1, group + 1, group_port + 1); + + value = i2c_smbus_read_word_data(client, get_group_cmd(group)); + if (value < 0) + return -ENODEV; + + dev_dbg(&client->dev, "read group%d value= %x\n", group + 1, value); + + value >>= (group_port * 4); + value &= RESET_MASK; + + return sprintf(buf, "%d\n", value ? 1 : 0); +} + +static ssize_t get_interrupt(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sfp_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->cpld_client; + u8 group = (u8)(data->cpld_port / 4); + u8 group_port = data->cpld_port % 4; + s32 value; + + dev_dbg(&client->dev, "port_id %d => cpld_port %d, group %d(%d)\n", data->port_id, + data->cpld_port + 1, group + 1, group_port + 1); + + value = i2c_smbus_read_word_data(client, get_group_cmd(group)); + if (value < 0) + return -ENODEV; + + dev_dbg(&client->dev, "read group%d value= %x\n", group + 1, value); + + value >>= (group_port * 4); + value &= INTERRUPT_MASK; + + return sprintf(buf, "%d\n", value ? 1 : 0); +} + +static ssize_t get_module_present(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sfp_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->cpld_client; + u8 group = (u8)(data->cpld_port / 4); + u8 group_port = data->cpld_port % 4; + s32 value; + + dev_dbg(&client->dev, "port_id %d => cpld_port %d, group %d(%d)\n", data->port_id, + data->cpld_port + 1, group + 1, group_port + 1); + + value = i2c_smbus_read_word_data(client, get_group_cmd(group)); + if (value < 0) + return -ENODEV; + + dev_dbg(&client->dev, "read group%d value= %x\n", group + 1, value); + + value >>= (group_port * 4); + value &= MODULE_PRESENT_MASK; + + //FIXME: if present is not low active + return sprintf(buf, "%d\n", value ? 0 : 1); +} + +static ssize_t get_lpmode(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sfp_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->cpld_client; + u8 group = (u8)(data->cpld_port / 4); + u8 group_port = data->cpld_port % 4; + s32 value; + + dev_dbg(&client->dev, "port_id %d => cpld_port %d, group %d(%d)\n", data->port_id, + data->cpld_port + 1, group + 1, group_port + 1); + + value = i2c_smbus_read_word_data(client, get_group_cmd(group)); + if (value < 0) + return -ENODEV; + + dev_dbg(&client->dev, "read group%d value= %x\n", group + 1, value); + + value >>= (group_port * 4); + value &= LPMODE_MASK; + + return sprintf(buf, "%d\n", value ? 1 : 0); +} + +static ssize_t set_reset(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sfp_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->cpld_client; + u8 group = (u8)(data->cpld_port / 4); + u8 group_port = data->cpld_port % 4; + s32 value; + long disable; + + dev_dbg(&client->dev, "port_id %d => cpld_port %d, group %d(%d)\n", data->port_id, + data->cpld_port + 1, group + 1, group_port + 1); + + if (kstrtol(buf, 0, &disable)) + return -EINVAL; + + if ((disable != 1) && (disable != 0)) + return -EINVAL; + +// mutex_lock(&data->lock); + value = i2c_smbus_read_word_data(client, get_group_cmd(group)); + if (value < 0) + return -ENODEV; + + dev_dbg(&client->dev, "read group%d value= %x\n", group + 1, value); + + value &= ~(RESET_MASK << (group_port * 4)); + if (disable) + value |= (RESET_MASK << (group_port * 4)); + + dev_dbg(&client->dev, "write group%d value= %x\n", group + 1, value); + + i2c_smbus_write_word_data(client, get_group_cmd(group), (u16)value); +// mutex_unlock(&data->lock); + + return count; +} + +static ssize_t set_lpmode(struct device *dev, + struct device_attribute *devattr, + const char *buf, + size_t count) +{ + struct sfp_data *data = dev_get_drvdata(dev); + struct i2c_client *client = data->cpld_client; + u8 group = (u8)(data->cpld_port / 4); + u8 group_port = data->cpld_port % 4; + s32 value; + long disable; + + dev_dbg(&client->dev, "port_id %d => cpld_port %d, group %d(%d)\n", data->port_id, + data->cpld_port + 1, group + 1, group_port + 1); + + if (kstrtol(buf, 0, &disable)) + return -EINVAL; + + if ((disable != 1) && (disable != 0)) + return -EINVAL; + +// mutex_lock(&data->lock); + value = i2c_smbus_read_word_data(client, get_group_cmd(group)); + if (value < 0) + return -ENODEV; + + dev_dbg(&client->dev, "read group%d value= %x\n", group + 1, value); + + value &= ~(LPMODE_MASK << (group_port * 4)); + if (disable) + value |= (LPMODE_MASK << (group_port * 4)); + + dev_dbg(&client->dev, "write group%d value= %x\n", group + 1, value); + + i2c_smbus_write_word_data(client, get_group_cmd(group), (u16)value); +// mutex_unlock(&data->lock); + + return count; +} + +static DEVICE_ATTR(reset, S_IWUSR | S_IRUGO, get_reset, set_reset); +static DEVICE_ATTR(lpmode, S_IWUSR | S_IRUGO, get_lpmode, set_lpmode); +static DEVICE_ATTR(module_present, S_IRUGO, get_module_present, NULL); +static DEVICE_ATTR(interrupt, S_IRUGO, get_interrupt, NULL); + +static const struct attribute *sfp_attrs[] = { + &dev_attr_reset.attr, + &dev_attr_lpmode.attr, + &dev_attr_module_present.attr, + &dev_attr_interrupt.attr, + NULL, +}; + +static const struct attribute_group sfp_attr_group = { + .attrs = (struct attribute **) sfp_attrs, +}; + +static int cpld_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cpld_data *data; + struct sfp_data *port_data; + struct device *port_dev; + int port_nr, i, err; + + if (!cpld_class) + { + cpld_class = class_create(THIS_MODULE, "cpld-qsfp28"); + if (IS_ERR(cpld_class)) { + pr_err("couldn't create sysfs class\n"); + return PTR_ERR(cpld_class); + } + } + + data = devm_kzalloc(&client->dev, sizeof(struct cpld_data), + GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* register sfp port data to sysfs */ + for (i = 0; i < 16; i++) + { + port_nr = ida_simple_get(&cpld_ida, 1, 99, GFP_KERNEL); + if (port_nr < 0) + return ERR_PTR(port_nr); + + port_data = kzalloc(sizeof(struct sfp_data), GFP_KERNEL); + + port_dev = device_create(cpld_class, &client->dev, MKDEV(0,0), port_data, CPLD_ID_FORMAT, port_nr); + if (IS_ERR(port_dev)) { + err = PTR_ERR(port_dev); + // printk("err_status\n"); + } + + data->port_dev[i] = port_dev; + data->port_data[i] = port_data; + + dev_info(&client->dev, "Register qsfp28 port-%d\n", port_nr); + + /* FIXME: implement Logical/Physical port remapping */ + //port_data->cpld_port = i; + port_data->cpld_port = port_remapping(i); + sprintf(port_data->name, "port-%d", port_nr); + port_data->port_id = port_nr; + dev_set_drvdata(port_dev, port_data); + port_dev->init_name = port_data->name; + port_data->cpld_client = client; + + err = sysfs_create_group(&port_dev->kobj, &sfp_attr_group); + // if (status) printk("err status\n"); + } + + i2c_set_clientdata(client, data); + mutex_init(&data->lock); + + dev_info(&client->dev, "%s device found\n", client->name); + + + return 0; + +//FIXME: implement error check +exit_remove: +// sysfs_remove_group(&client->dev.kobj, &data->attrs); + return err; +} + +/* FIXME: for older kernel doesn't with idr_is_empty function, implement here */ +static int idr_has_entry(int id, void *p, void *data) +{ + return 1; +} + +static bool cpld_idr_is_empty(struct idr *idp) +{ + return !idr_for_each(idp, idr_has_entry, NULL); +} + +static int cpld_remove(struct i2c_client *client) +{ + struct cpld_data *data = i2c_get_clientdata(client); + int i, id; + + for (i = 15; i >= 0; i--) + { + dev_info(data->port_dev[i], "Remove qsfp28 port-%d\n", data->port_data[i]->port_id); + device_unregister(data->port_dev[i]); + ida_simple_remove(&cpld_ida, data->port_data[i]->port_id); + kfree(data->port_data[i]); + } + + if (cpld_idr_is_empty(&cpld_ida.idr)) + class_destroy(cpld_class); + + return 0; +} + +module_i2c_driver(cpld_driver); + +MODULE_AUTHOR("Luffy Cheng "); +MODULE_DESCRIPTION("Quanta Switch SFP CPLD driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_platform.h b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_platform.h new file mode 100755 index 000000000000..0737c8ce8170 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_platform.h @@ -0,0 +1,64 @@ +/* + * Driver model definations for Quanta Platform drivers + * + * Copyright (C) 2015-2016 Quanta QCT + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __QCI_PLATFORM_H_INCLUDED +#define __QCI_PLATFORM_H_INCLUDED + +#define MUX_INFO(bus, deselect) \ + {.adap_id = bus, .deselect_on_exit = deselect} + +#define GPIO_INFO(id, gpio_nr) \ + {.gpio_id = id, .system_gpio_nr = gpio_nr} + +struct platform_gpio { + int gpio_id; + int system_gpio_nr; +}; + +/* FIXME: Please add important GPIO which need to be request */ +enum PLATFORM_GPIO_ID { + GPIO_PSU1_PRSNT, + GPIO_PSU1_PWRGD, + GPIO_PSU2_PRSNT, + GPIO_PSU2_PWRGD, +}; + +#define LED_ON LED_FULL + +#define LED_INFO(id) \ + {.led_id = id, .cdev = NULL} + +struct platform_led { + int led_id; + struct led_classdev *cdev; +}; + +enum PLATFORM_LED_ID { + SYSLED_AMBER, + SYSLED_GREEN, + FRONT_PSU1_GREEN, + FRONT_PSU1_RED, + FRONT_PSU2_GREEN, + FRONT_PSU2_RED, + FRONT_FAN_GREEN, + FRONT_FAN_RED, + REAR_FAN1_RED, + REAR_FAN2_RED, + REAR_FAN3_RED, + REAR_FAN4_RED, + REAR_FAN5_RED, + REAR_FAN6_RED, + TOTAL_LED_NR +}; + +extern int qci_platform_get_gpio(int platform_gpio); +extern int qci_platform_set_led(int led_id, bool led_on); + +#endif /* __QCI_PLATFORM_H_INCLUDED */ diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_platform_ix1b.c b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_platform_ix1b.c new file mode 100755 index 000000000000..f783c88fb9a1 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_platform_ix1b.c @@ -0,0 +1,491 @@ +/* + * Quanta IX1B platform driver + * + * + * Copyright (C) 2014 Quanta Computer inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if LINUX_VERSION_CODE > KERNEL_VERSION(3,12,0) +#include +#else +#include +#endif +#include "qci_platform.h" + +#define QUANTA_CPU_RGL + +static struct pca954x_platform_mode pca9548sfp1_modes[] = { + MUX_INFO(0x20, 1), + MUX_INFO(0x21, 1), + MUX_INFO(0x22, 1), + MUX_INFO(0x23, 1), + MUX_INFO(0x24, 1), + MUX_INFO(0x25, 1), + MUX_INFO(0x26, 1), + MUX_INFO(0x27, 1), +}; + +static struct pca954x_platform_data pca9548sfp1_data = { + .modes = pca9548sfp1_modes, + .num_modes = 8, +}; + +static struct pca954x_platform_mode pca9548sfp2_modes[] = { + MUX_INFO(0x28, 1), + MUX_INFO(0x29, 1), + MUX_INFO(0x2a, 1), + MUX_INFO(0x2b, 1), + MUX_INFO(0x2c, 1), + MUX_INFO(0x2d, 1), + MUX_INFO(0x2e, 1), + MUX_INFO(0x2f, 1), +}; + +static struct pca954x_platform_data pca9548sfp2_data = { + .modes = pca9548sfp2_modes, + .num_modes = 8, +}; + +static struct pca954x_platform_mode pca9548sfp3_modes[] = { + MUX_INFO(0x30, 1), + MUX_INFO(0x31, 1), + MUX_INFO(0x32, 1), + MUX_INFO(0x33, 1), + MUX_INFO(0x34, 1), + MUX_INFO(0x35, 1), + MUX_INFO(0x36, 1), + MUX_INFO(0x37, 1), +}; + +static struct pca954x_platform_data pca9548sfp3_data = { + .modes = pca9548sfp3_modes, + .num_modes = 8, +}; + +static struct pca954x_platform_mode pca9548sfp4_modes[] = { + MUX_INFO(0x38, 1), + MUX_INFO(0x39, 1), + MUX_INFO(0x3a, 1), + MUX_INFO(0x3b, 1), + MUX_INFO(0x3c, 1), + MUX_INFO(0x3d, 1), + MUX_INFO(0x3e, 1), + MUX_INFO(0x3f, 1), +}; + +static struct pca954x_platform_data pca9548sfp4_data = { + .modes = pca9548sfp4_modes, + .num_modes = 8, +}; + +static struct pca954x_platform_mode pca9546_1_modes[] = { + MUX_INFO(0x10, 1), + MUX_INFO(0x11, 1), + MUX_INFO(0x12, 1), + MUX_INFO(0x13, 1), +}; + +static struct pca954x_platform_data pca9546_1_data = { + .modes = pca9546_1_modes, + .num_modes = 4, +}; + +static struct pca954x_platform_mode pca9546_2_modes[] = { + MUX_INFO(0x14, 1), + MUX_INFO(0x15, 1), + MUX_INFO(0x16, 1), + MUX_INFO(0x17, 1), +}; + +static struct pca954x_platform_data pca9546_2_data = { + .modes = pca9546_2_modes, + .num_modes = 4, +}; + +/* CPU gpio base defined in devicetree + * default is ARCH_NR_GPIOS - 32, (256-32=224) + * It must match devicetree default gpio base + * */ +#define PCA9555_PSU_GPIO_BASE 0x10 +#define PCA9555_FAN_GPIO_BASE 0x20 +#define PCA9555_ID_GPIO_BASE 0x30 + +#if defined(QUANTA_CPU_RGL) +#define PCA9555_CPU_LED_GPIO_BASE 0x80 + +static struct pca954x_platform_mode pca9546_cpu1_modes[] = { + MUX_INFO(0x18, 1), + MUX_INFO(0x19, 1), + MUX_INFO(0x1a, 1), + MUX_INFO(0x1b, 1), +}; + +static struct pca954x_platform_data pca9546_cpu1_data = { + .modes = pca9546_cpu1_modes, + .num_modes = 4, +}; + +static struct pca953x_platform_data pca9555_cpuled_data = { + .gpio_base = PCA9555_CPU_LED_GPIO_BASE, +}; +#endif + +static struct pca953x_platform_data pca9555psu1_data = { + .gpio_base = PCA9555_PSU_GPIO_BASE, +}; + +static struct pca953x_platform_data pca9555fan_data = { + .gpio_base = PCA9555_FAN_GPIO_BASE, +}; + +static struct pca953x_platform_data pca9555ID_data = { + .gpio_base = PCA9555_ID_GPIO_BASE, +}; + +static struct i2c_board_info ix1b_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9546", 0x77), + .platform_data = &pca9546_1_data, + }, + { + I2C_BOARD_INFO("pca9546", 0x72), + .platform_data = &pca9546_2_data, + }, + { + I2C_BOARD_INFO("pca9555", 0x26), + .platform_data = &pca9555psu1_data, + }, + { + I2C_BOARD_INFO("24c02", 0x54), + }, + { + I2C_BOARD_INFO("pca9548", 0x73), + .platform_data = &pca9548sfp1_data, + }, + { + I2C_BOARD_INFO("pca9548", 0x74), + .platform_data = &pca9548sfp2_data, + }, + { + I2C_BOARD_INFO("pca9548", 0x75), + .platform_data = &pca9548sfp3_data, + }, + { + I2C_BOARD_INFO("pca9548", 0x76), + .platform_data = &pca9548sfp4_data, + }, + { + I2C_BOARD_INFO("CPLD-QSFP28", 0x38), + }, + { + I2C_BOARD_INFO("CPLD-QSFP28", 0x39), + }, + { + I2C_BOARD_INFO("pca9555", 0x23), + .platform_data = &pca9555ID_data, + }, + { + I2C_BOARD_INFO("pca9555", 0x25), + .platform_data = &pca9555fan_data, + }, + { + I2C_BOARD_INFO("qci_pmbus_ix1b", 0x5f), + }, + { + I2C_BOARD_INFO("qci_pmbus_ix1b", 0x59), + }, +#if defined(QUANTA_CPU_RGL) + { + I2C_BOARD_INFO("pca9546", 0x71), + .platform_data = &pca9546_cpu1_data, + }, + { + I2C_BOARD_INFO("pca9555", 0x20), + .platform_data = &pca9555_cpuled_data, + }, + { + I2C_BOARD_INFO("24c02", 0x50), + }, +#endif +}; + +static struct platform_driver ix1b_platform_driver = { + .driver = { + .name = "qci-ix1b", + .owner = THIS_MODULE, + }, +}; + +static struct platform_led ix1b_leds[] = { +#if defined(QUANTA_CPU_RGL) + LED_INFO(SYSLED_AMBER), + LED_INFO(SYSLED_GREEN), +#endif + LED_INFO(FRONT_PSU1_GREEN), + LED_INFO(FRONT_PSU1_RED), + LED_INFO(FRONT_PSU2_GREEN), + LED_INFO(FRONT_PSU2_RED), + LED_INFO(FRONT_FAN_GREEN), + LED_INFO(FRONT_FAN_RED), + LED_INFO(REAR_FAN1_RED), + LED_INFO(REAR_FAN2_RED), + LED_INFO(REAR_FAN3_RED), + LED_INFO(REAR_FAN4_RED), +}; + +static struct gpio_led system_led[] = { +#if defined(QUANTA_CPU_RGL) + { + .name = "sysled_amber", + .default_trigger = "timer", + .gpio = (PCA9555_CPU_LED_GPIO_BASE + 10), + .active_low = 0, + }, + { + .name = "sysled_green", + .gpio = (PCA9555_CPU_LED_GPIO_BASE + 11), + .active_low = 0, + }, +#endif + { + .name = "front_led_psu1_green", + .gpio = (PCA9555_PSU_GPIO_BASE + 10), + .active_low = 0, + }, + { + .name = "front_led_psu1_red", + .gpio = (PCA9555_PSU_GPIO_BASE + 11), + .active_low = 0, + }, + { + .name = "front_led_psu2_green", + .gpio = (PCA9555_PSU_GPIO_BASE + 12), + .active_low = 0, + }, + { + .name = "front_led_psu2_red", + .gpio = (PCA9555_PSU_GPIO_BASE + 13), + .active_low = 0, + }, + { + .name = "front_led_fan_green", + .gpio = (PCA9555_PSU_GPIO_BASE + 14), + .active_low = 0, + }, + { + .name = "front_led_fan_red", + .gpio = (PCA9555_PSU_GPIO_BASE + 15), + .active_low = 0, + }, + { + .name = "rear_led_fan1_red", + .gpio = (PCA9555_FAN_GPIO_BASE + 12), + .active_low = 0, + }, + { + .name = "rear_led_fan2_red", + .gpio = (PCA9555_FAN_GPIO_BASE + 13), + .active_low = 0, + }, + { + .name = "rear_led_fan3_red", + .gpio = (PCA9555_FAN_GPIO_BASE + 14), + .active_low = 0, + }, + { + .name = "rear_led_fan4_red", + .gpio = (PCA9555_FAN_GPIO_BASE + 15), + .active_low = 0, + }, +}; + +static struct gpio_led_platform_data system_led_data = { + .num_leds = ARRAY_SIZE(system_led), + .leds = system_led +}; + +static struct platform_device system_led_dev = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &system_led_data, + }, +}; + +static struct platform_device *ix1b_device; + +struct gpio_led_data { + struct led_classdev cdev; + unsigned gpio; + struct work_struct work; + u8 new_level; + u8 can_sleep; + u8 active_low; + u8 blinking; + int (*platform_gpio_blink_set)(unsigned gpio, int state, + unsigned long *delay_on, unsigned long *delay_off); +}; + +struct gpio_leds_priv { + int num_leds; + struct gpio_led_data leds[]; +}; + +static int __init ix1b_platform_init(void) +{ + struct i2c_client *client; + struct i2c_adapter *adapter; + struct gpio_leds_priv *priv; + int i; + int ret; + + ret = platform_driver_register(&ix1b_platform_driver); + if (ret < 0) + return ret; + + /* Register platform stuff */ + ix1b_device = platform_device_alloc("qci-ix1b", -1); + if (!ix1b_device) { + ret = -ENOMEM; + goto fail_platform_driver; + } + + ret = platform_device_add(ix1b_device); + if (ret) + goto fail_platform_device; + + adapter = i2c_get_adapter(0); + client = i2c_new_device(adapter, &ix1b_i2c_devices[0]); // pca9546_1 + printk("[CC] NEW device pca9546_1\n"); + client = i2c_new_device(adapter, &ix1b_i2c_devices[1]); // pca9546_2 + printk("[CC] NEW device pca9546_2\n"); +#if defined(QUANTA_CPU_RGL) + client = i2c_new_device(adapter, &ix1b_i2c_devices[14]); // cpu pca9546_1 + printk("[CC] NEW device cpu pca9546_1\n"); +#endif + i2c_put_adapter(adapter); + + adapter = i2c_get_adapter(0x14); + client = i2c_new_device(adapter, &ix1b_i2c_devices[12]); // pmbus_psu1 + printk("[CC] NEW device pmbus_psu1\n"); + i2c_put_adapter(adapter); + + adapter = i2c_get_adapter(0x15); + client = i2c_new_device(adapter, &ix1b_i2c_devices[13]); // pmbus_psu2 + printk("[CC] NEW device pmbus_psu2\n"); + i2c_put_adapter(adapter); + + adapter = i2c_get_adapter(0x16); + client = i2c_new_device(adapter, &ix1b_i2c_devices[2]); // pca9555-PSU1 + printk("[CC] NEW device pca9555-PSU1\n"); + client = i2c_new_device(adapter, &ix1b_i2c_devices[3]); // MB_BOARDINFO_EEPROM + printk("[CC] NEW device MB_BOARDINFO_EEPROM\n"); + client = i2c_new_device(adapter, &ix1b_i2c_devices[10]); // pca9555-ID + printk("[CC] NEW device pca9555-ID\n"); + i2c_put_adapter(adapter); + + adapter = i2c_get_adapter(0x17); + client = i2c_new_device(adapter, &ix1b_i2c_devices[11]); // pca9555-fan + printk("[CC] NEW device pca9555-fan\n"); + i2c_put_adapter(adapter); + + adapter = i2c_get_adapter(0x10); + client = i2c_new_device(adapter, &ix1b_i2c_devices[4]); // pca9548_2 SFP + printk("[CC] NEW device pca9548_2 SFP\n"); + client = i2c_new_device(adapter, &ix1b_i2c_devices[5]); // pca9548_3 SFP + printk("[CC] NEW device pca9548_3 SFP\n"); + client = i2c_new_device(adapter, &ix1b_i2c_devices[6]); // pca9548_4 SFP + printk("[CC] NEW device pca9548_4 SFP\n"); + client = i2c_new_device(adapter, &ix1b_i2c_devices[8]); // CPLD2 + printk("[CC] NEW device CPLD2\n"); + client = i2c_new_device(adapter, &ix1b_i2c_devices[9]); // CPLD3 + printk("[CC] NEW device CPLD3\n"); + i2c_put_adapter(adapter); + + adapter = i2c_get_adapter(0x11); + client = i2c_new_device(adapter, &ix1b_i2c_devices[7]); // pca9548_5 SFP + printk("[CC] NEW device pca9548_5 SFP\n"); + i2c_put_adapter(adapter); + +#if defined(QUANTA_CPU_RGL) + adapter = i2c_get_adapter(0x18); + client = i2c_new_device(adapter, &ix1b_i2c_devices[15]); // cpu pca9555_1 + printk("[CC] NEW device cpu pca9555_1\n"); + i2c_put_adapter(adapter); + + for(i = 0x20; i < 0x40; i++) + { + adapter = i2c_get_adapter(i); + client = i2c_new_device(adapter, &ix1b_i2c_devices[16]); // eeprom for loopback module + i2c_put_adapter(adapter); + } + printk("[CC] NEW device eeprom\n"); +#endif + + /* Register LED devices */ + platform_device_register(&system_led_dev); + priv = platform_get_drvdata(&system_led_dev); + for (i = 0; i < priv->num_leds; i++) { + printk("leds-gpio gpio-%d: Register led %s\n", priv->leds[i].gpio, priv->leds[i].cdev.name); + ix1b_leds[i].cdev = &(priv->leds[i].cdev); + } + printk("[CC] NEW device led\n"); + + return 0; + +fail_platform_device: + platform_device_put(ix1b_device); + +fail_platform_driver: + platform_driver_unregister(&ix1b_platform_driver); + return ret; +} + +static void __exit ix1b_platform_exit(void) +{ + platform_device_unregister(ix1b_device); + platform_driver_unregister(&ix1b_platform_driver); +} + +module_init(ix1b_platform_init); +module_exit(ix1b_platform_exit); + + +MODULE_AUTHOR("Quanta Computer Inc."); +MODULE_DESCRIPTION("Quanta IX1B Platform Driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_pmbus.c b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_pmbus.c new file mode 100755 index 000000000000..f54a0f204d67 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/modules/qci_pmbus.c @@ -0,0 +1,487 @@ +/* + * QUANTA Generic PMBUS driver + * + * + * Based on generic pmbus driver and ltc2978 driver + * + * Author: Chih-Pei Chang + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +//#include <../drivers/hwmon/pmbus/pmbus.h> +#include "pmbus.h" +#include + +enum projects { ly8, ix1, ix2, ix1b }; + +#define DELAY_TIME 1000 /* uS */ + +/* Needed to access the mutex. Copied from pmbus_core.c */ +#define PB_STATUS_BASE 0 +#define PB_STATUS_VOUT_BASE (PB_STATUS_BASE + PMBUS_PAGES) +#define PB_STATUS_IOUT_BASE (PB_STATUS_VOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN_BASE (PB_STATUS_IOUT_BASE + PMBUS_PAGES) +#define PB_STATUS_FAN34_BASE (PB_STATUS_FAN_BASE + PMBUS_PAGES) +#define PB_STATUS_TEMP_BASE (PB_STATUS_FAN34_BASE + PMBUS_PAGES) +#define PB_STATUS_INPUT_BASE (PB_STATUS_TEMP_BASE + PMBUS_PAGES) +#define PB_STATUS_VMON_BASE (PB_STATUS_INPUT_BASE + 1) +#define PB_NUM_STATUS_REG (PB_STATUS_VMON_BASE + 1) +struct pmbus_data { + struct device *dev; + struct device *hwmon_dev; + + u32 flags; /* from platform data */ + + int exponent[PMBUS_PAGES]; + /* linear mode: exponent for output voltages */ + + const struct pmbus_driver_info *info; + + int max_attributes; + int num_attributes; + struct attribute_group group; + const struct attribute_group *groups[2]; + + struct pmbus_sensor *sensors; + + struct mutex update_lock; + bool valid; + unsigned long last_updated; /* in jiffies */ + + /* + * A single status register covers multiple attributes, + * so we keep them all together. + */ + u8 status[PB_NUM_STATUS_REG]; + u8 status_register; + + u8 currpage; +}; + +static int qci_pmbus_read_block(struct i2c_client *client, u8 command, int data_len, u8 *data) +{ + int result = 0; + int retry_count = 3; + + while (retry_count) { + retry_count--; + + result = i2c_smbus_read_i2c_block_data(client, command, data_len, data); + + if (result < 0) { + msleep(10); + continue; + } + + result = 0; + break; + } + + return result; +} + +static ssize_t qci_pmbus_show_mfr_id(struct device *dev, + struct device_attribute *da, char *buf) +{ + int ret, len; + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1], *str; + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + + ret = qci_pmbus_read_block(client, PMBUS_MFR_ID, I2C_SMBUS_BLOCK_MAX, block_buffer); + if (ret < 0) { + dev_err(&client->dev, "Failed to read Manufacturer ID\n"); + return ret; + } + len = block_buffer[0]; + block_buffer[(len+1)] = '\0'; + str = &(block_buffer[1]); + + return snprintf(buf, PAGE_SIZE, "%s\n", str); +} + +static ssize_t qci_pmbus_show_mfr_model(struct device *dev, + struct device_attribute *da, char *buf) +{ + int ret, len; + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1], *str; + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + + ret = qci_pmbus_read_block(client, PMBUS_MFR_MODEL, I2C_SMBUS_BLOCK_MAX, block_buffer); + if (ret < 0) { + dev_err(&client->dev, "Failed to read Manufacturer Model\n"); + return ret; + } + len = block_buffer[0]; + block_buffer[(len+1)] = '\0'; + str = &(block_buffer[1]); + + return snprintf(buf, PAGE_SIZE, "%s\n", str); +} + +static ssize_t qci_pmbus_show_mfr_revision(struct device *dev, + struct device_attribute *da, char *buf) +{ + int ret, len; + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1], *str; + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + + ret = qci_pmbus_read_block(client, PMBUS_MFR_REVISION, I2C_SMBUS_BLOCK_MAX, block_buffer); + if (ret < 0) { + dev_err(&client->dev, "Failed to read Manufacturer Revision\n"); + return ret; + } + len = block_buffer[0]; + block_buffer[(len+1)] = '\0'; + str = &(block_buffer[1]); + + return snprintf(buf, PAGE_SIZE, "%s\n", str); +} + +static ssize_t qci_pmbus_show_mfr_location(struct device *dev, + struct device_attribute *da, char *buf) +{ + int ret, len; + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1], *str; + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + + ret = qci_pmbus_read_block(client, PMBUS_MFR_LOCATION, I2C_SMBUS_BLOCK_MAX, block_buffer); + if (ret < 0) { + dev_err(&client->dev, "Failed to read Manufacture Location\n"); + return ret; + } + len = block_buffer[0]; + block_buffer[(len+1)] = '\0'; + str = &(block_buffer[1]); + + return snprintf(buf, PAGE_SIZE, "%s\n", str); +} + +static ssize_t qci_pmbus_show_mfr_serial(struct device *dev, + struct device_attribute *da, char *buf) +{ + int ret, len; + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1], *str; + struct i2c_client *client = container_of(dev, struct i2c_client, dev); + + ret = qci_pmbus_read_block(client, PMBUS_MFR_SERIAL, I2C_SMBUS_BLOCK_MAX, block_buffer); + if (ret < 0) { + dev_err(&client->dev, "Failed to read Manufacturer Serial\n"); + return ret; + } + len = block_buffer[0]; + block_buffer[(len+1)] = '\0'; + str = &(block_buffer[1]); + + return snprintf(buf, PAGE_SIZE, "%s\n", str); +} + + +static DEVICE_ATTR(mfr_id, S_IRUGO, qci_pmbus_show_mfr_id, NULL); +static DEVICE_ATTR(mfr_model, S_IRUGO, qci_pmbus_show_mfr_model, NULL); +static DEVICE_ATTR(mfr_revision, S_IRUGO, qci_pmbus_show_mfr_revision, NULL); +static DEVICE_ATTR(mfr_location, S_IRUGO, qci_pmbus_show_mfr_location, NULL); +static DEVICE_ATTR(mfr_serial, S_IRUGO, qci_pmbus_show_mfr_serial, NULL); + + +static struct attribute *qci_pmbus_inventory_attrs[] = { + &dev_attr_mfr_id.attr, + &dev_attr_mfr_model.attr, + &dev_attr_mfr_revision.attr, + &dev_attr_mfr_location.attr, + &dev_attr_mfr_serial.attr, + NULL +}; + +static struct attribute_group qci_pmbus_inventory_attr_grp = { + .attrs = qci_pmbus_inventory_attrs +}; + +/* FIXME: add project specific id here */ +static const struct i2c_device_id qci_pmbus_id[] = { + {"qci_pmbus_ly8", ly8}, + {"qci_pmbus_ix1", ix1}, + {"qci_pmbus_ix2", ix2}, + {"qci_pmbus_ix1b", ix1b}, + {} +}; +MODULE_DEVICE_TABLE(i2c, qci_pmbus_id); + +/* + * Find sensor groups and status registers on each page. + */ +static void qci_pmbus_find_sensor_groups(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int page; + + /* Sensors detected on page 0 only */ + if (pmbus_check_word_register(client, 0, PMBUS_READ_VIN)) + info->func[0] |= PMBUS_HAVE_VIN; + if (pmbus_check_word_register(client, 0, PMBUS_READ_VCAP)) + info->func[0] |= PMBUS_HAVE_VCAP; + if (pmbus_check_word_register(client, 0, PMBUS_READ_IIN)) + info->func[0] |= PMBUS_HAVE_IIN; + if (pmbus_check_word_register(client, 0, PMBUS_READ_PIN)) + info->func[0] |= PMBUS_HAVE_PIN; + if (info->func[0] + && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT)) + info->func[0] |= PMBUS_HAVE_STATUS_INPUT; + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) { + info->func[0] |= PMBUS_HAVE_FAN12; + if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12)) + info->func[0] |= PMBUS_HAVE_STATUS_FAN12; + } + if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) && + pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) { + info->func[0] |= PMBUS_HAVE_FAN34; + if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34)) + info->func[0] |= PMBUS_HAVE_STATUS_FAN34; + } + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1)) + info->func[0] |= PMBUS_HAVE_TEMP; + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2)) + info->func[0] |= PMBUS_HAVE_TEMP2; + if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3)) + info->func[0] |= PMBUS_HAVE_TEMP3; + if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_TEMP3) + && pmbus_check_byte_register(client, 0, + PMBUS_STATUS_TEMPERATURE)) + info->func[0] |= PMBUS_HAVE_STATUS_TEMP; + + /* Sensors detected on all pages */ + for (page = 0; page < info->pages; page++) { + if (pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) { + info->func[page] |= PMBUS_HAVE_VOUT; + if (pmbus_check_byte_register(client, page, + PMBUS_STATUS_VOUT)) + info->func[page] |= PMBUS_HAVE_STATUS_VOUT; + } + if (pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) { + info->func[page] |= PMBUS_HAVE_IOUT; + if (pmbus_check_byte_register(client, 0, + PMBUS_STATUS_IOUT)) + info->func[page] |= PMBUS_HAVE_STATUS_IOUT; + } + if (pmbus_check_word_register(client, page, PMBUS_READ_POUT)) + info->func[page] |= PMBUS_HAVE_POUT; + } +} + +/* + * Identify chip parameters. + */ +static int qci_pmbus_identify(struct i2c_client *client, + struct pmbus_driver_info *info) +{ + int ret = 0; + + if (!info->pages) { + /* + * Check if the PAGE command is supported. If it is, + * keep setting the page number until it fails or until the + * maximum number of pages has been reached. Assume that + * this is the number of pages supported by the chip. + */ + if (pmbus_check_byte_register(client, 0, PMBUS_PAGE)) { + int page; + + for (page = 1; page < PMBUS_PAGES; page++) { + if (pmbus_set_page(client, page) < 0) + break; + } + pmbus_set_page(client, 0); + info->pages = page; + } else { + info->pages = 1; + } + } + + if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) { + int vout_mode; + + vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE); + if (vout_mode >= 0 && vout_mode != 0xff) { + switch (vout_mode >> 5) { + case 0: + break; + case 1: + info->format[PSC_VOLTAGE_OUT] = vid; + break; + case 2: + info->format[PSC_VOLTAGE_OUT] = direct; + break; + default: + ret = -ENODEV; + goto abort; + } + } + } + + /* + * We should check if the COEFFICIENTS register is supported. + * If it is, and the chip is configured for direct mode, we can read + * the coefficients from the chip, one set per group of sensor + * registers. + * + * To do this, we will need access to a chip which actually supports the + * COEFFICIENTS command, since the command is too complex to implement + * without testing it. Until then, abort if a chip configured for direct + * mode was detected. + */ + if (info->format[PSC_VOLTAGE_OUT] == direct) { + ret = -ENODEV; + goto abort; + } + + /* if no function pre-defined, try to find sensor groups */ + if (info->func[0] == 0) qci_pmbus_find_sensor_groups(client, info); +abort: + return ret; +} + +int qci_pmbus_set_page(struct i2c_client *client, u8 page) +{ + struct pmbus_data *data = i2c_get_clientdata(client); + int rv = 0; + int newpage; + + if (page != data->currpage) { + rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + udelay(DELAY_TIME); + newpage = i2c_smbus_read_byte_data(client, PMBUS_PAGE); + if (newpage != page) + rv = -EIO; + else + data->currpage = page; + } + return rv; +} + +int qci_write_byte(struct i2c_client *client, int page, u8 value) +{ + int rv; + + if (page >= 0) { + rv = qci_pmbus_set_page(client, page); + if (rv < 0) + return rv; + } + + rv = i2c_smbus_write_byte(client, value); + udelay(DELAY_TIME); + return rv; +} + +int qci_write_word_data(struct i2c_client *client, int page, int reg, u16 word) +{ + int rv; + + rv = qci_pmbus_set_page(client, page); + if (rv < 0) + return rv; + + rv = i2c_smbus_write_word_data(client, reg, word); + udelay(DELAY_TIME); + return rv; +} + +static int qci_pmbus_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct pmbus_driver_info *info; + int ret, i; + + dev_info(dev, "qci_pmbus_probe\n"); + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) + return -ENODEV; + + info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info), + GFP_KERNEL); + + if (!info) + return -ENOMEM; + + info->func[0] = 0; + + /* FIXME: add project specific function table here */ + switch (id->driver_data) { + case ly8: + info->pages = 1; + info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 + | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT + ; + break; + case ix1: + case ix2: + case ix1b: + info->pages = 1; + info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN + | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT + | PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 + | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP + | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT + | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT + | PMBUS_HAVE_POUT + ; + break; + default: + break; + } + info->write_word_data = qci_write_word_data; + info->write_byte = qci_write_byte; + info->identify = qci_pmbus_identify; /* FIXME: reserve for future use */ + + /* Register sysfs hooks */ + ret = sysfs_create_group(&dev->kobj, &qci_pmbus_inventory_attr_grp); + if (ret) { + dev_err(dev, "Failed to create sysfs entries\n"); + return -1; + } + + return pmbus_do_probe(client, id, info); +} + +/* This is the driver that will be inserted */ +static struct i2c_driver qci_pmbus_driver = { + .driver = { + .name = "qci-pmbus", + }, + .probe = qci_pmbus_probe, + .remove = pmbus_do_remove, + .id_table = qci_pmbus_id, +}; + +module_i2c_driver(qci_pmbus_driver); + + +MODULE_AUTHOR("Quanta Computer Inc."); +MODULE_VERSION("1.0"); +MODULE_DESCRIPTION("QUANTA generic PMBus driver"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/service/ix1b-platform-init.service b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/service/ix1b-platform-init.service new file mode 100755 index 000000000000..a51c0cca6914 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/service/ix1b-platform-init.service @@ -0,0 +1,13 @@ +[Unit] +Description=Quanta IX1B-32X Platform initialization service +Before=pmon.service +DefaultDependencies=no + +[Service] +Type=oneshot +ExecStart=/usr/local/bin/quanta_ix1b_util.py install +ExecStop=/usr/local/bin/quanta_ix1b_util.py clean +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/setup.py b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/setup.py new file mode 100755 index 000000000000..e37687db7eca --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/setup.py @@ -0,0 +1,16 @@ +#!/usr/bin/env python + +import os +import sys +from setuptools import setup +os.listdir + +setup( + name='ix1b_32x', + version='1.0', + description='Module to initialize Quanta IX1B-32X platforms', + + packages=['ix1b_32x'], + package_dir={'ix1b_32x': 'ix1b-32x/classes'}, +) + diff --git a/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/utils/quanta_ix1b_util.py b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/utils/quanta_ix1b_util.py new file mode 100755 index 000000000000..f530cf3dbb7b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-quanta/ix1b-32x/utils/quanta_ix1b_util.py @@ -0,0 +1,203 @@ +#!/usr/bin/env python +# +# Copyright (C) 2018 Quanta Computer Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + +DEBUG = False +args = [] +FORCE = 0 +i2c_prefix = '/sys/bus/i2c/devices/' + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + install() + elif arg == 'clean': + uninstall() + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_log(txt): + if DEBUG == True: + print "[IX1B-32X]"+txt + return + +def exec_cmd(cmd, show): + logging.info('Run :'+cmd) + status, output = commands.getstatusoutput(cmd) + show_log (cmd +"with result:" + str(status)) + show_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +instantiate =[ +#turn on module power +'echo 53 > /sys/class/gpio/export', +'echo out > /sys/class/gpio/gpio53/direction', +'echo 1 >/sys/class/gpio/gpio53/value', +#turn on 100G led by default +'i2cset -y 0x13 0x38 0x00 0xff', +'i2cset -y 0x13 0x38 0x01 0xff', +'i2cset -y 0x13 0x39 0x00 0xff', +'i2cset -y 0x13 0x39 0x01 0xff' +] + +drivers =[ +'lpc_ich', +'i2c-i801', +'i2c-dev', +'i2c-mux-pca954x', +'gpio-pca953x', +'qci_pmbus', +'leds-gpio', +'qci_cpld_qsfp28', +'qci_platform_ix1b' +] + + + +def system_install(): + global FORCE + + #remove default drivers to avoid modprobe order conflicts + status, output = exec_cmd("rmmod i2c_ismt ", 1) + status, output = exec_cmd("rmmod i2c-i801 ", 1) + #setup driver dependency + status, output = exec_cmd("depmod -a ", 1) + #install drivers + for i in range(0,len(drivers)): + status, output = exec_cmd("modprobe "+drivers[i], 1) + if status: + print output + if FORCE == 0: + return status + + #instantiate devices + for i in range(0,len(instantiate)): + time.sleep(1) + status, output = exec_cmd(instantiate[i], 1) + if status: + print output + if FORCE == 0: + return status + + #for i in range(22,30): + # status, output =exec_cmd("echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-0/i2c-4/i2c-"+str(i)+"/new_device", 1) + # if status: + # print output + # if FORCE == 0: + # return status + + return + + +def system_ready(): + if not device_found(): + return False + return True + +def install(): + if not device_found(): + print "No device, installing...." + status = system_install() + if status: + if FORCE == 0: + return status + else: + print " ix1b driver already installed...." + return + +def uninstall(): + global FORCE + #uninstall drivers + for i in range(len(drivers)-1,-1,-1): + status, output = exec_cmd("rmmod "+drivers[i], 1) + if status: + print output + if FORCE == 0: + return status + return + +def device_found(): + ret1, log = exec_cmd("ls "+i2c_prefix+"i2c-0", 0) + return ret1 + +if __name__ == "__main__": + main() + + + From 0338379ca61aa097b4d9e4a48d91fefafba277ce Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Wed, 8 Aug 2018 08:05:22 +0000 Subject: [PATCH 119/180] [devices]: enable ingress and ariata devices on barefoot platform --- platform/barefoot/platform-modules-arista.mk | 2 ++ platform/barefoot/platform-modules-bfn-montara.mk | 2 ++ platform/barefoot/platform-modules-ingrasys.mk | 2 ++ platform/barefoot/platform-modules-wnc-osw1800.mk | 2 ++ 4 files changed, 8 insertions(+) diff --git a/platform/barefoot/platform-modules-arista.mk b/platform/barefoot/platform-modules-arista.mk index 633435c0550a..480aa0cf8396 100644 --- a/platform/barefoot/platform-modules-arista.mk +++ b/platform/barefoot/platform-modules-arista.mk @@ -21,3 +21,5 @@ $(eval $(call add_extra_package,$(ARISTA_PLATFORM_MODULE),$(ARISTA_PLATFORM_MODU export ARISTA_PLATFORM_MODULE ARISTA_PLATFORM_MODULE_PYTHON2 ARISTA_PLATFORM_MODULE_PYTHON3 ARISTA_PLATFORM_MODULE_DRIVERS export ARISTA_SCD_DRIVER_CONFIG=m + +SONIC_STRETCH_DEBS += $(ARISTA_PLATFORM_MODULE) diff --git a/platform/barefoot/platform-modules-bfn-montara.mk b/platform/barefoot/platform-modules-bfn-montara.mk index 113faf201e41..853c3c636ac3 100644 --- a/platform/barefoot/platform-modules-bfn-montara.mk +++ b/platform/barefoot/platform-modules-bfn-montara.mk @@ -9,3 +9,5 @@ $(BFN_MONTARA_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-module $(BFN_MONTARA_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) $(BFN_MONTARA_PLATFORM_MODULE)_PLATFORM = x86_64-accton_wedge100bf_32x-r0 SONIC_DPKG_DEBS += $(BFN_MONTARA_PLATFORM_MODULE) + +# SONIC_STRETCH_DEBS += $(BFN_MONTARA_PLATFORM_MODULE) diff --git a/platform/barefoot/platform-modules-ingrasys.mk b/platform/barefoot/platform-modules-ingrasys.mk index 5145dcbc5ffa..ea8f68c003fc 100644 --- a/platform/barefoot/platform-modules-ingrasys.mk +++ b/platform/barefoot/platform-modules-ingrasys.mk @@ -16,3 +16,5 @@ INGRASYS_S9280_64X_PLATFORM_MODULE = sonic-platform-ingrasys-s9280-64x_$(INGRASY $(INGRASYS_S9280_64X_PLATFORM_MODULE)_PLATFORM = x86_64-ingrasys_s9280_64x-r0 $(eval $(call add_extra_package,$(INGRASYS_S9180_32X_PLATFORM_MODULE),$(INGRASYS_S9280_64X_PLATFORM_MODULE))) + +SONIC_STRETCH_DEBS += $(INGRASYS_S9180_32X_PLATFORM_MODULE) diff --git a/platform/barefoot/platform-modules-wnc-osw1800.mk b/platform/barefoot/platform-modules-wnc-osw1800.mk index a85ba6b19326..aabcb8cdf0ba 100644 --- a/platform/barefoot/platform-modules-wnc-osw1800.mk +++ b/platform/barefoot/platform-modules-wnc-osw1800.mk @@ -9,3 +9,5 @@ $(WNC_OSW1800_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-module $(WNC_OSW1800_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) $(WNC_OSW1800_PLATFORM_MODULE)_PLATFORM = x86_64-wnc_osw1800-r0 SONIC_DPKG_DEBS += $(WNC_OSW1800_PLATFORM_MODULE) + +# SONIC_STRETCH_DEBS += $(WNC_OSW1800_PLATFORM_MODULE) From 678d4d4a0cce53764184b7cd84db2307b9420cc4 Mon Sep 17 00:00:00 2001 From: Volodymyr Samotiy Date: Fri, 10 Aug 2018 10:01:32 +0300 Subject: [PATCH 120/180] [mellanox]: Update SDK pointer (#41) Signed-off-by: Volodymyr Samotiy --- platform/mellanox/sdk.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platform/mellanox/sdk.mk b/platform/mellanox/sdk.mk index 88bfe76d0f0d..d3bb61517339 100644 --- a/platform/mellanox/sdk.mk +++ b/platform/mellanox/sdk.mk @@ -1,4 +1,4 @@ -MLNX_SDK_BASE_URL = https://github.com/Mellanox/SAI-Implementation/raw/5be04c71508e0688ae004ed838b998dba521f693/sdk +MLNX_SDK_BASE_URL = https://github.com/Mellanox/SAI-Implementation/raw/87823de172a593e070ff7e9f3e17d442c7cf1eac/sdk MLNX_SDK_VERSION = 4.2.8103 MLNX_SDK_RDEBS += $(APPLIBS) $(IPROUTE2_MLNX) $(SX_ACL_RM) $(SX_COMPLIB) \ $(SX_EXAMPLES) $(SX_GEN_UTILS) $(SX_SCEW) $(SX_SDN_HAL) \ From 6a3c05f49835aa3f869ce807518465ac91f2d022 Mon Sep 17 00:00:00 2001 From: Volodymyr Samotiy Date: Fri, 10 Aug 2018 10:02:09 +0300 Subject: [PATCH 121/180] [mellanox]: Update recipe for hw-mgmt according to latest changes (#40) Signed-off-by: Volodymyr Samotiy --- .gitmodules | 4 +- files/build_templates/swss.service.j2 | 4 +- platform/mellanox/hw-management.mk | 2 +- .../Add-systemd-service-config.patch | 58 +++++++++++++++++++ platform/mellanox/hw-management/Makefile | 14 +++++ .../{hw-management => hw-management/hw-mgmt} | 0 6 files changed, 77 insertions(+), 5 deletions(-) mode change 100755 => 100644 .gitmodules create mode 100644 platform/mellanox/hw-management/Add-systemd-service-config.patch create mode 100644 platform/mellanox/hw-management/Makefile rename platform/mellanox/{hw-management => hw-management/hw-mgmt} (100%) diff --git a/.gitmodules b/.gitmodules old mode 100755 new mode 100644 index 73ab4bf8ba13..c89dfe45fced --- a/.gitmodules +++ b/.gitmodules @@ -68,6 +68,6 @@ [submodule "platform/barefoot/sonic-platform-modules-arista"] path = platform/barefoot/sonic-platform-modules-arista url = https://github.com/aristanetworks/sonic -[submodule "platform/mellanox/hw-management"] - path = platform/mellanox/hw-management +[submodule "platform/mellanox/hw-management/hw-mgmt"] + path = platform/mellanox/hw-management/hw-mgmt url = https://github.com/Mellanox/hw-mgmt/ diff --git a/files/build_templates/swss.service.j2 b/files/build_templates/swss.service.j2 index 1ceb706a175d..289a840d3517 100644 --- a/files/build_templates/swss.service.j2 +++ b/files/build_templates/swss.service.j2 @@ -31,7 +31,7 @@ ExecStartPre=/usr/bin/mst start ExecStartPre=/usr/bin/mlnx-fw-upgrade.sh ExecStartPre=/etc/init.d/sxdkernel start ExecStartPre=/sbin/modprobe i2c-dev -ExecStartPre=/bin/bash -c "/usr/share/sonic/device/$(sonic-cfggen -H -v DEVICE_METADATA.localhost.platform)/hw-management start" +ExecStartPre=/bin/bash -c "/etc/mlnx/mlnx-hw-management start" {% elif sonic_asic_platform == 'cavium' %} ExecStartPre=/etc/init.d/xpnet.sh start {% endif %} @@ -44,7 +44,7 @@ ExecStop=/usr/bin/{{docker_container_name}}.sh stop ExecStopPost=/usr/bin/syncd.sh stop {% if sonic_asic_platform == 'mellanox' %} -ExecStopPost=/bin/bash -c "/usr/share/sonic/device/$(sonic-cfggen -H -v DEVICE_METADATA.localhost.platform)/hw-management stop" +ExecStartPre=/bin/bash -c "/etc/mlnx/mlnx-hw-management stop" ExecStopPost=/etc/init.d/sxdkernel stop ExecStopPost=/usr/bin/mst stop {% elif sonic_asic_platform == 'cavium' %} diff --git a/platform/mellanox/hw-management.mk b/platform/mellanox/hw-management.mk index ee5f923058e5..cd457181268f 100644 --- a/platform/mellanox/hw-management.mk +++ b/platform/mellanox/hw-management.mk @@ -7,6 +7,6 @@ export MLNX_HW_MANAGEMENT_VERSION MLNX_HW_MANAGEMENT = hw-management_1.mlnx.$(MLNX_HW_MANAGEMENT_VERSION)_amd64.deb $(MLNX_HW_MANAGEMENT)_SRC_PATH = $(PLATFORM_PATH)/hw-management $(MLNX_HW_MANAGEMENT)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) -SONIC_DPKG_DEBS += $(MLNX_HW_MANAGEMENT) +SONIC_MAKE_DEBS += $(MLNX_HW_MANAGEMENT) SONIC_STRETCH_DEBS += $(MLNX_HW_MANAGEMENT) diff --git a/platform/mellanox/hw-management/Add-systemd-service-config.patch b/platform/mellanox/hw-management/Add-systemd-service-config.patch new file mode 100644 index 000000000000..ce16bb712ee1 --- /dev/null +++ b/platform/mellanox/hw-management/Add-systemd-service-config.patch @@ -0,0 +1,58 @@ +From 22fef644b1150677353ab0559828ea45a982d901 Mon Sep 17 00:00:00 2001 +From: Andriy Moroz +Date: Wed, 11 Jul 2018 16:51:07 +0300 +Subject: [PATCH] Add systemd service config + +Signed-off-by: Andriy Moroz +--- + debian/control | 2 +- + debian/hw-management.service | 10 ++++++++++ + debian/rules | 2 +- + 3 files changed, 12 insertions(+), 2 deletions(-) + create mode 100644 debian/hw-management.service + +diff --git a/debian/control b/debian/control +index 048cd61..7e3a545 100644 +--- a/debian/control ++++ b/debian/control +@@ -1,7 +1,7 @@ + Source: hw-management + Priority: extra + Maintainer: MellanoxBSP +-Build-Depends: ++Build-Depends: dh-systemd + Standards-Version: + Section: libs + Homepage: http://www.mellanox.com +diff --git a/debian/hw-management.service b/debian/hw-management.service +new file mode 100644 +index 0000000..d18916d +--- /dev/null ++++ b/debian/hw-management.service +@@ -0,0 +1,10 @@ ++[Unit] ++Description=Mellanox Hardware Management ++ ++[Service] ++Type=oneshot ++EnvironmentFile=/host/machine.conf ++ExecStart=/bin/bash -c "/etc/mlnx/mlnx-hw-management start" ++ ++[Install] ++WantedBy=multi-user.target +diff --git a/debian/rules b/debian/rules +index fc38817..fba4150 100755 +--- a/debian/rules ++++ b/debian/rules +@@ -8,7 +8,7 @@ K_SRC ?= "/lib/modules/$(KVERSION)/build" + pwd=$(shell pwd) + + %: +- dh $@ ++ dh $@ --with systemd + + override_dh_auto_configure: + +-- +1.9.1 + diff --git a/platform/mellanox/hw-management/Makefile b/platform/mellanox/hw-management/Makefile new file mode 100644 index 000000000000..608c94e6b02a --- /dev/null +++ b/platform/mellanox/hw-management/Makefile @@ -0,0 +1,14 @@ +.ONESHELL: +SHELL = /bin/bash + +MAIN_TARGET = hw-management_1.mlnx.$(MLNX_HW_MANAGEMENT_VERSION)_amd64.deb + +$(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : + + pushd hw-mgmt + git am ../*.patch + chmod +x ./debian/rules + sudo ./debian/rules binary KVERSION=$(KVERSION) + popd + + mv $* $(DEST)/ diff --git a/platform/mellanox/hw-management b/platform/mellanox/hw-management/hw-mgmt similarity index 100% rename from platform/mellanox/hw-management rename to platform/mellanox/hw-management/hw-mgmt From be0328a59ab60fa81480d1fc798e5e532e55d213 Mon Sep 17 00:00:00 2001 From: Samuel Angebault Date: Fri, 10 Aug 2018 16:47:33 -0700 Subject: [PATCH 122/180] Update arista-drivers submodules (#42) --- platform/barefoot/sonic-platform-modules-arista | 2 +- platform/broadcom/sonic-platform-modules-arista | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/platform/barefoot/sonic-platform-modules-arista b/platform/barefoot/sonic-platform-modules-arista index 8f65ad92c5b5..a4d1d8d2737c 160000 --- a/platform/barefoot/sonic-platform-modules-arista +++ b/platform/barefoot/sonic-platform-modules-arista @@ -1 +1 @@ -Subproject commit 8f65ad92c5b5dfec24e8faf068cc9d2374244edf +Subproject commit a4d1d8d2737cf49bd6cc802dbc6c8c0ff682fa87 diff --git a/platform/broadcom/sonic-platform-modules-arista b/platform/broadcom/sonic-platform-modules-arista index a7edec0e19e6..a4d1d8d2737c 160000 --- a/platform/broadcom/sonic-platform-modules-arista +++ b/platform/broadcom/sonic-platform-modules-arista @@ -1 +1 @@ -Subproject commit a7edec0e19e63b4ec437d32928a5362a6d0a9bc9 +Subproject commit a4d1d8d2737cf49bd6cc802dbc6c8c0ff682fa87 From 002bff4e4518e22a232cb1cab3ec941bbcde65bd Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 11 Aug 2018 17:58:30 +0000 Subject: [PATCH 123/180] [baseimage]: use rsyslog in baseimage from stretch repo Signed-off-by: Guohan Lu --- build_debian.sh | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/build_debian.sh b/build_debian.sh index c5368c4a2229..e274b19adadc 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -221,6 +221,7 @@ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y in gdisk \ sysfsutils \ grub2-common \ + rsyslog \ ethtool \ screen \ hping3 \ @@ -228,10 +229,6 @@ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y in tcptraceroute \ mtr-tiny -# Install a newer version of rsyslog from jessie-backports in hopes of -# eliminating memory leaks -sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y -t jessie-backports install rsyslog - sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y download \ grub-pc-bin From 400597596a5c7ff36edf9cf5d8ce69bc855fbb40 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 11 Aug 2018 21:09:47 +0000 Subject: [PATCH 124/180] [submodules]: update submodule for platform modules dell, s6000 and kernel Signed-off-by: Guohan Lu --- .gitmodules | 6 +++--- platform/broadcom/sonic-platform-modules-dell | 2 +- platform/broadcom/sonic-platform-modules-s6000 | 2 +- src/sonic-linux-kernel | 2 +- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/.gitmodules b/.gitmodules index c89dfe45fced..728c417cdba9 100644 --- a/.gitmodules +++ b/.gitmodules @@ -3,7 +3,7 @@ url = https://github.com/Azure/sonic-swss-common [submodule "sonic-linux-kernel"] path = src/sonic-linux-kernel - url = https://github.com/lguohan/sonic-linux-kernel + url = https://github.com/Azure/sonic-linux-kernel branch = stretch [submodule "sonic-sairedis"] path = src/sonic-sairedis @@ -38,14 +38,14 @@ url = https://github.com/Azure/sonic-utilities [submodule "platform/broadcom/sonic-platform-modules-s6000"] path = platform/broadcom/sonic-platform-modules-s6000 - url = https://github.com/lguohan/sonic-platform-modules-s6000 + url = https://github.com/Azure/sonic-platform-modules-s6000 branch = stretch [submodule "platform/broadcom/sonic-platform-modules-arista"] path = platform/broadcom/sonic-platform-modules-arista url = https://github.com/aristanetworks/sonic [submodule "platform/broadcom/sonic-platform-modules-dell"] path = platform/broadcom/sonic-platform-modules-dell - url = https://github.com/lguohan/sonic-platform-modules-dell + url = https://github.com/Azure/sonic-platform-modules-dell branch = stretch [submodule "src/sonic-platform-common"] path = src/sonic-platform-common diff --git a/platform/broadcom/sonic-platform-modules-dell b/platform/broadcom/sonic-platform-modules-dell index 6cfea2267688..ae36817bbabc 160000 --- a/platform/broadcom/sonic-platform-modules-dell +++ b/platform/broadcom/sonic-platform-modules-dell @@ -1 +1 @@ -Subproject commit 6cfea2267688b7fb5cd11a867057ed264a01502c +Subproject commit ae36817bbabc2825f184b5e7cdad5422b4f1d9db diff --git a/platform/broadcom/sonic-platform-modules-s6000 b/platform/broadcom/sonic-platform-modules-s6000 index 168674d34148..6c4da534410c 160000 --- a/platform/broadcom/sonic-platform-modules-s6000 +++ b/platform/broadcom/sonic-platform-modules-s6000 @@ -1 +1 @@ -Subproject commit 168674d34148fbf7e8a989edae6a341272a9cffa +Subproject commit 6c4da534410c037892ad0338d1c930b5b9b1493b diff --git a/src/sonic-linux-kernel b/src/sonic-linux-kernel index 70fdaa224c13..9ce82be61202 160000 --- a/src/sonic-linux-kernel +++ b/src/sonic-linux-kernel @@ -1 +1 @@ -Subproject commit 70fdaa224c1373682be871c084bf0f590bfafd8f +Subproject commit 9ce82be612023bf73093b231e98c69c7c4bb1ea0 From 88ea503e63892f998f438439300b50d2bdaef6c5 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 11 Aug 2018 21:26:12 +0000 Subject: [PATCH 125/180] [doc]: update build instruction for debian stretch build Signed-off-by: Guohan Lu --- README.md | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/README.md b/README.md index 0c9ded3441d8..20c7b9a80bc4 100644 --- a/README.md +++ b/README.md @@ -58,6 +58,10 @@ To build SONiC installer image and docker images, run the following commands: # Execute make configure once to configure ASIC make configure PLATFORM=[ASIC_VENDOR] + # build debian stretch required targets + BLDENV=stretch make stretch + + # build SONiC image make **NOTE**: @@ -79,11 +83,6 @@ The SONiC installer contains all docker images needed. SONiC uses one image for For Broadcom ASIC, we build ONIE and EOS image. EOS image is used for Arista devices, ONIE image is used for all other Broadcom ASIC based devices. - make configure PLATFORM=broadcom - BLDENV=stretch make stretch - # build ONIE image - make target/sonic-broadcom.bin - You may find the rules/config file useful. It contains configuration options for the build process, like adding more verbosity or showing dependencies, username and password for base image etc. Every docker image is built and saved to target/ directory. From 7f7a2a019ec68087d40f9897ae32ca58848329a8 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 11 Aug 2018 21:38:33 +0000 Subject: [PATCH 126/180] [sshd]: regenerate ssh key if ssh_host_rsa_key is not present ssh_host_key is removed in debian stretch. Use ssh_host_rsa_key to decide if the host keys are present. Signed-off-by: Guohan Lu --- files/sshd/host-ssh-keygen.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/files/sshd/host-ssh-keygen.sh b/files/sshd/host-ssh-keygen.sh index 476dd00a2800..ade24e6383de 100755 --- a/files/sshd/host-ssh-keygen.sh +++ b/files/sshd/host-ssh-keygen.sh @@ -1,6 +1,6 @@ #!/bin/bash -[ -r /etc/ssh/ssh_host_key ] || { +[ -r /etc/ssh/ssh_host_rsa_key ] || { rm -f /etc/ssh/ssh_host_*_key* /usr/bin/ssh-keygen -t rsa -N '' -f /etc/ssh/ssh_host_rsa_key /usr/bin/ssh-keygen -t dsa -N '' -f /etc/ssh/ssh_host_dsa_key From 66ffca2832856cf05af0f8443640e838aacc522b Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sat, 11 Aug 2018 23:46:13 +0000 Subject: [PATCH 127/180] [kernel]: set default option to build kernel Signed-off-by: Guohan Lu --- platform/broadcom/sonic-platform-modules-ingrasys/debian/rules | 0 slave.mk | 2 +- src/sonic-linux-kernel | 2 +- 3 files changed, 2 insertions(+), 2 deletions(-) mode change 100644 => 100755 platform/broadcom/sonic-platform-modules-ingrasys/debian/rules diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/debian/rules b/platform/broadcom/sonic-platform-modules-ingrasys/debian/rules old mode 100644 new mode 100755 diff --git a/slave.mk b/slave.mk index d6ce78e6f19c..4f1998680b29 100644 --- a/slave.mk +++ b/slave.mk @@ -139,7 +139,7 @@ $(info ) ## All rules must go after includes for propper targets expansion ############################################################################### -export kernel_procure_method="$(KERNEL_PROCURE_METHOD)" +export kernel_procure_method=$(KERNEL_PROCURE_METHOD) ############################################################################### ## Local targets diff --git a/src/sonic-linux-kernel b/src/sonic-linux-kernel index 9ce82be61202..28e99c0e7618 160000 --- a/src/sonic-linux-kernel +++ b/src/sonic-linux-kernel @@ -1 +1 @@ -Subproject commit 9ce82be612023bf73093b231e98c69c7c4bb1ea0 +Subproject commit 28e99c0e76189e8ec5c46535cbd87145668262d8 From 1533bc5875d1a9e431dab8006bee122f8dc93a48 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 12 Aug 2018 06:38:47 +0000 Subject: [PATCH 128/180] [dockerbase]: use libwrarp0 7.6.q-26 in docker base Signed-off-by: Guohan Lu --- src/libwrap/Makefile | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/src/libwrap/Makefile b/src/libwrap/Makefile index 4cb2e88a0c46..512b1d51fb18 100644 --- a/src/libwrap/Makefile +++ b/src/libwrap/Makefile @@ -10,7 +10,12 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : rm -rf ./tcp-wrappers-7.6.q* # Get source package - apt-get source libwrap0 + wget -NO tcp-wrappers_$(LIBWRAP_VERSION).dsc "https://sonicstorage.blob.core.windows.net/packages/debian/tcp-wrappers_7.6.q-26.dsc?sv=2015-04-05&sr=b&sig=5dxVp8RsLfnuMDm99g4JpgG6Q3zzTaoTkPNVoo0d8YE%3D&se=2155-07-05T06%3A34%3A45Z&sp=r" + wget -NO tcp-wrappers_$(LIBWRAP_VERSION).debian.tar.xz "https://sonicstorage.blob.core.windows.net/packages/debian/tcp-wrappers_7.6.q-26.debian.tar.xz?sv=2015-04-05&sr=b&sig=6%2FquqekmGloVz%2FaDc%2BCOCLL%2FKqEfIWrr%2BdmnZhJ8k8Q%3D&se=2155-07-05T06%3A32%3A43Z&sp=r" + wget -NO tcp-wrappers_7.6.q.orig.tar.gz "https://sonicstorage.blob.core.windows.net/packages/debian/tcp-wrappers_7.6.q.orig.tar.gz?sv=2015-04-05&sr=b&sig=%2B%2BQbllR9xfwmYvgLiz1jtyn6ZP4oLgbTENTL5Fj8M4w%3D&se=2155-07-05T06%3A35%3A24Z&sp=r" + + dpkg-source -x tcp-wrappers_$(LIBWRAP_VERSION).dsc + cp tcp_wrappers-7.6-allowlist.patch tcp-wrappers-7.6.q/debian/patches/tcp_wrappers-7.6-allowlist.patch echo tcp_wrappers-7.6-allowlist.patch >> tcp-wrappers-7.6.q/debian/patches/series From 8910c7e18c269c5ae63ebf89f5f677b7c9992120 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 12 Aug 2018 07:58:59 +0000 Subject: [PATCH 129/180] update .gitignore Signed-off-by: Guohan Lu --- .gitignore | 1 + .../sonic-platform-modules-accton/.gitignore | 17 +++++++++++++++ .../.gitignore | 17 +++++++++++++++ .../sonic-platform-modules-quanta/.gitignore | 21 +++++++++++++++---- 4 files changed, 52 insertions(+), 4 deletions(-) diff --git a/.gitignore b/.gitignore index 4eb7ab7e9ab7..0103ab241bc1 100644 --- a/.gitignore +++ b/.gitignore @@ -8,6 +8,7 @@ fs.* target/ *.deb *.changes +*.buildinfo # Subdirectories in src src/hiredis/* diff --git a/platform/broadcom/sonic-platform-modules-accton/.gitignore b/platform/broadcom/sonic-platform-modules-accton/.gitignore index f805e810e5c6..7f287d538227 100644 --- a/platform/broadcom/sonic-platform-modules-accton/.gitignore +++ b/platform/broadcom/sonic-platform-modules-accton/.gitignore @@ -31,3 +31,20 @@ # Debug files *.dSYM/ *.su + +# Kernel Module Compile Results +*.mod* +*.cmd +*.o.d +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf + +# Debian packaging +*.debhelper.log +*.postinst.debhelper +*.postrm.debhelper +*.prerm.debhelper +*.substvars diff --git a/platform/broadcom/sonic-platform-modules-ingrasys/.gitignore b/platform/broadcom/sonic-platform-modules-ingrasys/.gitignore index f805e810e5c6..7f287d538227 100644 --- a/platform/broadcom/sonic-platform-modules-ingrasys/.gitignore +++ b/platform/broadcom/sonic-platform-modules-ingrasys/.gitignore @@ -31,3 +31,20 @@ # Debug files *.dSYM/ *.su + +# Kernel Module Compile Results +*.mod* +*.cmd +*.o.d +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf + +# Debian packaging +*.debhelper.log +*.postinst.debhelper +*.postrm.debhelper +*.prerm.debhelper +*.substvars diff --git a/platform/broadcom/sonic-platform-modules-quanta/.gitignore b/platform/broadcom/sonic-platform-modules-quanta/.gitignore index 2615f7f89bbb..7f287d538227 100755 --- a/platform/broadcom/sonic-platform-modules-quanta/.gitignore +++ b/platform/broadcom/sonic-platform-modules-quanta/.gitignore @@ -1,10 +1,6 @@ # Object files *.o *.ko -*.cmd -*.mod.c -*.symvers -*.order *.obj *.elf @@ -35,3 +31,20 @@ # Debug files *.dSYM/ *.su + +# Kernel Module Compile Results +*.mod* +*.cmd +*.o.d +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf + +# Debian packaging +*.debhelper.log +*.postinst.debhelper +*.postrm.debhelper +*.prerm.debhelper +*.substvars From 6246b161d558b103ecbb86ce435f4f515e03726a Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Sun, 12 Aug 2018 08:20:10 +0000 Subject: [PATCH 130/180] [doc]: update build instruction for debian stretch Signed-off-by: Guohan Lu --- README.md | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 20c7b9a80bc4..e09c4e2c2801 100644 --- a/README.md +++ b/README.md @@ -62,7 +62,7 @@ To build SONiC installer image and docker images, run the following commands: BLDENV=stretch make stretch # build SONiC image - make + make all **NOTE**: @@ -83,6 +83,14 @@ The SONiC installer contains all docker images needed. SONiC uses one image for For Broadcom ASIC, we build ONIE and EOS image. EOS image is used for Arista devices, ONIE image is used for all other Broadcom ASIC based devices. + make configure PLATFORM=broadcom + # build debian stretch required targets + BLDENV=stretch make stretch + # build ONIE image + make target/sonic-broadcom.bin + # build EOS image + make target/sonic-aboot-broadcom.swi + You may find the rules/config file useful. It contains configuration options for the build process, like adding more verbosity or showing dependencies, username and password for base image etc. Every docker image is built and saved to target/ directory. From d761630f738925060d57ec7739ab04e60d0f294f Mon Sep 17 00:00:00 2001 From: zhenggen-xu Date: Sun, 12 Aug 2018 03:14:55 -0700 Subject: [PATCH 131/180] Fix potential blackholing/looping traffic when link-local was used and refresh ipv6 neighbor to avoid CPU hit (#1904) * Fix potential blackholing/looping traffic and refresh ipv6 neighbor to avoid CPU hit In case ipv6 global addresses were configured on L3 interfaces and used for peering, and routing protocol was using link-local addresses on the same interfaces as prefered nexthops, the link-local addresses could be aged out after a while due to no activities towards the link-local addresses themselves. And when we receive new routes with the link-local nexthops, SONiC won't insert them to the HW, and thus cause looping or blackholing traffic. Global ipv6 addresses on L3 interfaces between switches are refreshed by BGP keeplive and other messages. On server facing side, traffic may hit fowarding plane only, and no refresh for the ipv6 neighbor entries regularly. This could age-out the linux kernel ipv6 neighbor entries, and HW neighbor table entries could be removed, and thus traffic going to those neighbors would hit CPU, and cause traffic drop and temperary CPU high load. Also, if link-local addresses were not learned, we may not get them at all later. It is intended to fix all above issues. Changes: Add ndisc6 package in swss docker and use it for ipv6 ndp ping to update the neighbors' state on Vlan interfaces Change the default ipv6 neighbor reachable timer to 30mins Add periodical ipv6 multicast ping to ff02::11 to get/refresh link-local neighbor info. * Fix review comments: Add PORTCHANNEL_INTERFACE interface for ipv6 multicast ping format issue * Combine regular L3 interface and portchannel interface for looping * Add ndisc6 package to vs docker --- build_debian.sh | 1 + dockers/docker-orchagent/Dockerfile.j2 | 1 + files/scripts/arp_update | 34 +++++++++++++++++++++-- platform/vs/docker-sonic-vs/Dockerfile.j2 | 1 + 4 files changed, 35 insertions(+), 2 deletions(-) diff --git a/build_debian.sh b/build_debian.sh index e274b19adadc..03425ffe5bcf 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -303,6 +303,7 @@ set /files/etc/sysctl.conf/net.ipv4.conf.all.arp_notify 1 set /files/etc/sysctl.conf/net.ipv4.conf.all.arp_ignore 2 set /files/etc/sysctl.conf/net.ipv4.neigh.default.base_reachable_time_ms 1800000 +set /files/etc/sysctl.conf/net.ipv6.neigh.default.base_reachable_time_ms 1800000 set /files/etc/sysctl.conf/net.ipv6.conf.default.forwarding 1 set /files/etc/sysctl.conf/net.ipv6.conf.all.forwarding 1 diff --git a/dockers/docker-orchagent/Dockerfile.j2 b/dockers/docker-orchagent/Dockerfile.j2 index eceb82a06c76..2d204df9078f 100755 --- a/dockers/docker-orchagent/Dockerfile.j2 +++ b/dockers/docker-orchagent/Dockerfile.j2 @@ -10,6 +10,7 @@ RUN apt-get update RUN apt-get install -f -y ifupdown arping libdbus-1-3 libdaemon0 libjansson4 +RUN apt-get install -f -y ndisc6 ## Install redis-tools dependencies ## TODO: implicitly install dependencies RUN apt-get -y install libjemalloc1 diff --git a/files/scripts/arp_update b/files/scripts/arp_update index ab44ca6a4580..f7c5ec8bb856 100755 --- a/files/scripts/arp_update +++ b/files/scripts/arp_update @@ -1,10 +1,28 @@ #!/bin/bash # # usage: -# arp_update: Send gratuitous ARP requests to VLAN member neighbors to refresh -# the neighbors state. +# arp_update: +# Send ipv6 multicast pings to all "UP" L3 interfaces including vlan interfaces to +# refresh link-local addresses from neighbors. +# Send gratuitous ARP/NDP requests to VLAN member neighbors to refresh +# the ipv4/ipv6 neighbors state. while /bin/true; do + # find L3 interfaces which are UP, send ipv6 multicast pings + echo "{% for (name, prefix) in INTERFACE %} {{name}} {% endfor %}" > /tmp/intf_tmp.j2 + INTERFACE=`sonic-cfggen -d -t /tmp/intf_tmp.j2` + echo "{% for (name, prefix) in PORTCHANNEL_INTERFACE %} {{name}} {% endfor %}" > /tmp/pc_intf_tmp.j2 + PC_INTERFACE=`sonic-cfggen -d -t /tmp/pc_intf_tmp.j2` + + ALL_INTERFACE="$INTERFACE $PC_INTERFACE" + for intf in $ALL_INTERFACE; do + ping6cmd="ping6 -I $intf -n -q -i 0 -c 1 -W 0 ff02::1 >/dev/null" + intf_up=$(ip link show $intf | grep "state UP") + if [[ -n "$intf_up" ]]; then + eval $ping6cmd + fi + done + VLAN=`sonic-cfggen -d -v 'VLAN.keys() | join(" ") if VLAN'` for vlan in $VLAN; do # generate a list of arping commands: @@ -15,6 +33,18 @@ while /bin/true; do ipcmd="ip -4 neigh show | grep $vlan | cut -d ' ' -f 1,3 | $arpingcmd" eval `eval $ipcmd` + + # send ipv6 multicast pings to Vlan interfaces to get/refresh link-local addrs + ping6cmd="ping6 -I $vlan -n -q -i 0 -c 1 -W 0 ff02::1 >/dev/null" + eval $ping6cmd + + # generate a list of ndisc6 commands (exclude link-local addrs since it is done above): + # ndisc6 -q -w 0 -1 ; + # ndisc6 -q -w 0 -1 ; + # ... + ndisc6cmd="sed -e 's/^/ndisc6 -q -w 0 -1 /' -e 's/$/;/'" + ip6cmd="ip -6 neigh show | grep -v fe80 | grep $vlan | cut -d ' ' -f 1,3 | $ndisc6cmd" + eval `eval $ip6cmd` done sleep 300 done diff --git a/platform/vs/docker-sonic-vs/Dockerfile.j2 b/platform/vs/docker-sonic-vs/Dockerfile.j2 index 2d9b72aa3298..ded75caff524 100644 --- a/platform/vs/docker-sonic-vs/Dockerfile.j2 +++ b/platform/vs/docker-sonic-vs/Dockerfile.j2 @@ -13,6 +13,7 @@ RUN apt-get update RUN apt-get install -y net-tools \ arping \ + ndisc6 \ ethtool \ tcpdump \ ifupdown \ From 58db7f17a733732d6714da318087c535f1a842a6 Mon Sep 17 00:00:00 2001 From: klhaung <38268572+klhaung@users.noreply.github.com> Date: Mon, 13 Aug 2018 03:39:20 +0800 Subject: [PATCH 132/180] [device & platform] led and transceiver deamon for inventec switch d7032 and d7054 (#1678) * [device]: Modify SFPUtil for inventec-d7032 [device]: Add front panel led support for Inventec-d7032 [platform]: Add transceiver monitor daemon for Inventec-d7032 and Inventec-d7054 * [device] follow new porting guide to have broadcom config under device folder * remove license --- .../INVENTEC-D7032Q28B-C32/sai.profile | 2 +- .../th-d7032q28b-32x100g.config.bcm | 290 +++++++++++ .../th-d7032q28b-32x40g.config.bcm | 427 ++++++++++++++++ .../led_proc_init.soc | 136 +++++ .../plugins/sfputil.py | 10 + .../INVENTEC-D7054Q28B-S48-Q6/sai.profile | 2 +- .../th-d7054q28b-48x10g-6x100g.config.bcm | 465 ++++++++++++++++++ .../th-d7054q28b-48x25g-6x100g.config.bcm | 414 ++++++++++++++++ .../common/utils/led_proc.py | 314 ++++++++++++ .../common/utils/transceiver_monitor.py | 305 ++++++++++++ .../debian/platform-modules-d7032q28b.init | 22 + .../debian/platform-modules-d7032q28b.install | 2 + .../debian/platform-modules-d7032q28b.upstart | 5 - .../debian/platform-modules-d7054q28b.init | 22 + .../debian/platform-modules-d7054q28b.install | 3 + .../debian/platform-modules-d7054q28b.upstart | 5 - 16 files changed, 2412 insertions(+), 12 deletions(-) create mode 100644 device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/th-d7032q28b-32x100g.config.bcm create mode 100644 device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/th-d7032q28b-32x40g.config.bcm create mode 100644 device/inventec/x86_64-inventec_d7032q28b-r0/led_proc_init.soc create mode 100644 device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/th-d7054q28b-48x10g-6x100g.config.bcm create mode 100644 device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/th-d7054q28b-48x25g-6x100g.config.bcm create mode 100755 platform/broadcom/sonic-platform-modules-inventec/common/utils/led_proc.py create mode 100755 platform/broadcom/sonic-platform-modules-inventec/common/utils/transceiver_monitor.py delete mode 100644 platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.upstart delete mode 100644 platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.upstart diff --git a/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/sai.profile b/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/sai.profile index 5312a779bbc3..acd7f9034862 100644 --- a/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/sai.profile +++ b/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/sai.profile @@ -1,2 +1,2 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-d7032q28b-32x100g.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-d7032q28b-32x100g.config.bcm SAI_NUM_ECMP_MEMBERS=32 diff --git a/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/th-d7032q28b-32x100g.config.bcm b/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/th-d7032q28b-32x100g.config.bcm new file mode 100644 index 000000000000..613158431634 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/th-d7032q28b-32x100g.config.bcm @@ -0,0 +1,290 @@ +# Redwood BCM Shell config / all 100G 32 ports + +# Define default OS / SAL +os=unix + +l2_mem_entries=8192 +l3_mem_entries=8192 +l3_alpm_enable=2 +#ipv6_lpm_128b_enable=1 +l2xmsg_mode=1 +mem_cache_enable=0 +parity_correction=0 +parity_enable=0 +# per Broadcom feedback, no more pbmp_oversubscribe +# pbmp_oversubscribe=0x00003fc000000ff0000003fc000001fe +oversubscribe_mode=1 +pbmp_xport_xe=0x3fd000000ff4000003fc000001fe + +# EagleCore ports +portmap_66=129:10 +portmap_100=131:10 + +# Loopback ports +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 + +portmap_68=65:100 +portmap_69=69:100 +portmap_70=73:100 +portmap_71=77:100 +portmap_72=81:100 +portmap_73=85:100 +portmap_74=89:100 +portmap_75=93:100 + +portmap_102=97:100 +portmap_103=101:100 +portmap_104=105:100 +portmap_105=109:100 +portmap_106=113:100 +portmap_107=117:100 +portmap_108=121:100 +portmap_109=125:100 + +portmap_1=1:100 +portmap_2=5:100 +portmap_3=9:100 +portmap_4=13:100 +portmap_5=17:100 +portmap_6=21:100 +portmap_7=25:100 +portmap_8=29:100 + +portmap_34=33:100 +portmap_35=37:100 +portmap_36=41:100 +portmap_37=45:100 +portmap_38=49:100 +portmap_39=53:100 +portmap_40=57:100 +portmap_41=61:100 + +phy_xaui_tx_polarity_flip_ce0=0x8 +phy_xaui_tx_polarity_flip_ce1=0x6 +phy_xaui_tx_polarity_flip_ce2=0x6 +phy_xaui_tx_polarity_flip_ce3=0x6 +phy_xaui_tx_polarity_flip_ce4=0x3 +phy_xaui_tx_polarity_flip_ce5=0x4 +phy_xaui_tx_polarity_flip_ce6=0xc +phy_xaui_tx_polarity_flip_ce7=0x6 +phy_xaui_tx_polarity_flip_ce8=0xc +phy_xaui_tx_polarity_flip_ce9=0x3 +phy_xaui_tx_polarity_flip_ce10=0x3 +phy_xaui_tx_polarity_flip_ce11=0x3 +phy_xaui_tx_polarity_flip_ce12=0x4 +phy_xaui_tx_polarity_flip_ce13=0x1 +phy_xaui_tx_polarity_flip_ce14=0x2 +phy_xaui_tx_polarity_flip_ce15=0x3 +phy_xaui_tx_polarity_flip_ce16=0x2 +phy_xaui_tx_polarity_flip_ce17=0x3 +phy_xaui_tx_polarity_flip_ce18=0x2 +phy_xaui_tx_polarity_flip_ce19=0x8 +phy_xaui_tx_polarity_flip_ce20=0x2 +phy_xaui_tx_polarity_flip_ce21=0x9 +phy_xaui_tx_polarity_flip_ce22=0x8 +phy_xaui_tx_polarity_flip_ce23=0x9 +phy_xaui_tx_polarity_flip_ce24=0x2 +phy_xaui_tx_polarity_flip_ce25=0x4 +phy_xaui_tx_polarity_flip_ce26=0xd +phy_xaui_tx_polarity_flip_ce27=0xc +phy_xaui_tx_polarity_flip_ce28=0x3 +phy_xaui_tx_polarity_flip_ce29=0xc +phy_xaui_tx_polarity_flip_ce30=0xc +phy_xaui_tx_polarity_flip_ce31=0x2 + +phy_xaui_rx_polarity_flip_ce0=0xb +phy_xaui_rx_polarity_flip_ce1=0xc +phy_xaui_rx_polarity_flip_ce2=0xc +phy_xaui_rx_polarity_flip_ce3=0xc +phy_xaui_rx_polarity_flip_ce4=0x1 +phy_xaui_rx_polarity_flip_ce5=0xc +phy_xaui_rx_polarity_flip_ce6=0x4 +phy_xaui_rx_polarity_flip_ce7=0xc +phy_xaui_rx_polarity_flip_ce8=0xb +phy_xaui_rx_polarity_flip_ce9=0x6 +phy_xaui_rx_polarity_flip_ce10=0x1 +phy_xaui_rx_polarity_flip_ce11=0x8 +phy_xaui_rx_polarity_flip_ce12=0xc +phy_xaui_rx_polarity_flip_ce13=0x6 +phy_xaui_rx_polarity_flip_ce14=0x4 +phy_xaui_rx_polarity_flip_ce15=0xe +phy_xaui_rx_polarity_flip_ce16=0xe +phy_xaui_rx_polarity_flip_ce17=0x2 +phy_xaui_rx_polarity_flip_ce18=0x4 +phy_xaui_rx_polarity_flip_ce19=0x6 +phy_xaui_rx_polarity_flip_ce20=0xe +phy_xaui_rx_polarity_flip_ce21=0x3 +phy_xaui_rx_polarity_flip_ce22=0x3 +phy_xaui_rx_polarity_flip_ce23=0x3 +phy_xaui_rx_polarity_flip_ce24=0xb +phy_xaui_rx_polarity_flip_ce25=0xc +phy_xaui_rx_polarity_flip_ce26=0xe +phy_xaui_rx_polarity_flip_ce27=0xc +phy_xaui_rx_polarity_flip_ce28=0xb +phy_xaui_rx_polarity_flip_ce29=0x9 +phy_xaui_rx_polarity_flip_ce30=0x6 +phy_xaui_rx_polarity_flip_ce31=0x9 + +# EQ/iDriver +serdes_preemphasis_1=0x323E00 +serdes_preemphasis_2=0x323E00 +serdes_preemphasis_3=0x323E00 +serdes_preemphasis_4=0x323E00 + +serdes_preemphasis_5=0x323E00 +serdes_preemphasis_6=0x323E00 +serdes_preemphasis_7=0x323E00 +serdes_preemphasis_8=0x323E00 + +serdes_preemphasis_9=0x343C00 +serdes_preemphasis_10=0x343C00 +serdes_preemphasis_11=0x343C00 +serdes_preemphasis_12=0x343C00 + +serdes_preemphasis_13=0x343C00 +serdes_preemphasis_14=0x343C00 +serdes_preemphasis_15=0x343C00 +serdes_preemphasis_16=0x343C00 + +serdes_preemphasis_17=0x323E00 +serdes_preemphasis_18=0x323E00 +serdes_preemphasis_19=0x323E00 +serdes_preemphasis_20=0x323E00 + +serdes_preemphasis_21=0x323E00 +serdes_preemphasis_22=0x323E00 +serdes_preemphasis_23=0x323E00 +serdes_preemphasis_24=0x323E00 + +serdes_preemphasis_25=0x304000 +serdes_preemphasis_26=0x304000 +serdes_preemphasis_27=0x304000 +serdes_preemphasis_28=0x304000 + +serdes_preemphasis_29=0x304000 +serdes_preemphasis_30=0x304000 +serdes_preemphasis_31=0x304000 +serdes_preemphasis_32=0x304000 + +serdes_preemphasis_34=0x2D4300 +serdes_preemphasis_35=0x2D4300 +serdes_preemphasis_36=0x2D4300 +serdes_preemphasis_37=0x2D4300 + +serdes_preemphasis_38=0x2D4300 +serdes_preemphasis_39=0x2D4300 +serdes_preemphasis_40=0x2D4300 +serdes_preemphasis_41=0x2D4300 + +serdes_preemphasis_42=0x2B4500 +serdes_preemphasis_43=0x2B4500 +serdes_preemphasis_44=0x2B4500 +serdes_preemphasis_45=0x2B4500 + +serdes_preemphasis_46=0x2B4500 +serdes_preemphasis_47=0x2B4500 +serdes_preemphasis_48=0x2B4500 +serdes_preemphasis_49=0x2B4500 + +serdes_preemphasis_50=0x2B4500 +serdes_preemphasis_51=0x2B4500 +serdes_preemphasis_52=0x2B4500 +serdes_preemphasis_53=0x2B4500 + +serdes_preemphasis_54=0x284800 +serdes_preemphasis_55=0x284800 +serdes_preemphasis_56=0x284800 +serdes_preemphasis_57=0x284800 + +serdes_preemphasis_58=0x2B4500 +serdes_preemphasis_59=0x2B4500 +serdes_preemphasis_60=0x2B4500 +serdes_preemphasis_61=0x2B4500 + +serdes_preemphasis_62=0x2B4500 +serdes_preemphasis_63=0x2B4500 +serdes_preemphasis_64=0x2B4500 +serdes_preemphasis_65=0x2B4500 + +serdes_preemphasis_68=0x284800 +serdes_preemphasis_69=0x284800 +serdes_preemphasis_70=0x284800 +serdes_preemphasis_71=0x284800 + +serdes_preemphasis_72=0x284800 +serdes_preemphasis_73=0x284800 +serdes_preemphasis_74=0x284800 +serdes_preemphasis_75=0x284800 + +serdes_preemphasis_76=0x284800 +serdes_preemphasis_77=0x284800 +serdes_preemphasis_78=0x284800 +serdes_preemphasis_79=0x284800 + +serdes_preemphasis_80=0x2A4600 +serdes_preemphasis_81=0x2A4600 +serdes_preemphasis_82=0x2A4600 +serdes_preemphasis_83=0x2A4600 + +serdes_preemphasis_84=0x2B4500 +serdes_preemphasis_85=0x2B4500 +serdes_preemphasis_86=0x2B4500 +serdes_preemphasis_87=0x2B4500 + +serdes_preemphasis_88=0x2A4600 +serdes_preemphasis_89=0x2A4600 +serdes_preemphasis_90=0x2A4600 +serdes_preemphasis_91=0x2A4600 + +serdes_preemphasis_92=0x2B4500 +serdes_preemphasis_93=0x2B4500 +serdes_preemphasis_94=0x2B4500 +serdes_preemphasis_95=0x2B4500 + +serdes_preemphasis_96=0x2B4500 +serdes_preemphasis_97=0x2B4500 +serdes_preemphasis_98=0x2B4500 +serdes_preemphasis_99=0x2B4500 + +serdes_preemphasis_102=0x2B4500 +serdes_preemphasis_103=0x2B4500 +serdes_preemphasis_104=0x2B4500 +serdes_preemphasis_105=0x2B4500 + +serdes_preemphasis_106=0x2B4500 +serdes_preemphasis_107=0x2B4500 +serdes_preemphasis_108=0x2B4500 +serdes_preemphasis_109=0x2B4500 + +serdes_preemphasis_110=0x2D4300 +serdes_preemphasis_111=0x2D4300 +serdes_preemphasis_112=0x2D4300 +serdes_preemphasis_113=0x2D4300 + +serdes_preemphasis_114=0x304000 +serdes_preemphasis_115=0x304000 +serdes_preemphasis_116=0x304000 +serdes_preemphasis_117=0x304000 + +serdes_preemphasis_118=0x304000 +serdes_preemphasis_119=0x304000 +serdes_preemphasis_120=0x304000 +serdes_preemphasis_121=0x304000 + +serdes_preemphasis_122=0x304000 +serdes_preemphasis_123=0x304000 +serdes_preemphasis_124=0x304000 +serdes_preemphasis_125=0x304000 + +serdes_preemphasis_126=0x343C00 +serdes_preemphasis_127=0x343C00 +serdes_preemphasis_128=0x343C00 +serdes_preemphasis_129=0x343C00 + +serdes_preemphasis_130=0x343C00 +serdes_preemphasis_131=0x343C00 +serdes_preemphasis_132=0x343C00 +serdes_preemphasis_133=0x343C00 diff --git a/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/th-d7032q28b-32x40g.config.bcm b/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/th-d7032q28b-32x40g.config.bcm new file mode 100644 index 000000000000..03d0bb06cb06 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7032q28b-r0/INVENTEC-D7032Q28B-C32/th-d7032q28b-32x40g.config.bcm @@ -0,0 +1,427 @@ +# Redwood BCM Shell config / all 100G 32 ports + +# Define default OS / SAL +os=unix + +l2_mem_entries=8192 +l3_mem_entries=8192 +l3_alpm_enable=2 +#ipv6_lpm_128b_enable=1 +l2xmsg_mode=1 +mem_cache_enable=0 +parity_correction=0 +parity_enable=0 +# per Broadcom feedback, no more pbmp_oversubscribe +# pbmp_oversubscribe=0x00003fc000000ff0000003fc000001fe +oversubscribe_mode=1 +pbmp_xport_xe=0x3fd000000ff4000003fc000001fe + +# EagleCore ports +portmap_66=129:10 +portmap_100=131:10 + +# Loopback ports +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 + +portmap_68=65:40 +portmap_69=69:40 +portmap_70=73:40 +portmap_71=77:40 +portmap_72=81:40 +portmap_73=85:40 +portmap_74=89:40 +portmap_75=93:40 + +portmap_102=97:40 +portmap_103=101:40 +portmap_104=105:40 +portmap_105=109:40 +portmap_106=113:40 +portmap_107=117:40 +portmap_108=121:40 +portmap_109=125:40 + +portmap_1=1:40 +portmap_2=5:40 +portmap_3=9:40 +portmap_4=13:40 +portmap_5=17:40 +portmap_6=21:40 +portmap_7=25:40 +portmap_8=29:40 + +portmap_34=33:40 +portmap_35=37:40 +portmap_36=41:40 +portmap_37=45:40 +portmap_38=49:40 +portmap_39=53:40 +portmap_40=57:40 +portmap_41=61:40 + +phy_xaui_tx_polarity_flip_xe0=0x8 +phy_xaui_tx_polarity_flip_xe1=0x6 +phy_xaui_tx_polarity_flip_xe2=0x6 +phy_xaui_tx_polarity_flip_xe3=0x6 +phy_xaui_tx_polarity_flip_xe4=0x3 +phy_xaui_tx_polarity_flip_xe5=0x4 +phy_xaui_tx_polarity_flip_xe6=0xc +phy_xaui_tx_polarity_flip_xe7=0x6 +phy_xaui_tx_polarity_flip_xe8=0xc +phy_xaui_tx_polarity_flip_xe9=0x3 +phy_xaui_tx_polarity_flip_xe10=0x3 +phy_xaui_tx_polarity_flip_xe11=0x3 +phy_xaui_tx_polarity_flip_xe12=0x4 +phy_xaui_tx_polarity_flip_xe13=0x1 +phy_xaui_tx_polarity_flip_xe14=0x2 +phy_xaui_tx_polarity_flip_xe15=0x3 +phy_xaui_tx_polarity_flip_xe16=0x2 +phy_xaui_tx_polarity_flip_xe17=0x3 +phy_xaui_tx_polarity_flip_xe18=0x2 +phy_xaui_tx_polarity_flip_xe19=0x8 +phy_xaui_tx_polarity_flip_xe20=0x2 +phy_xaui_tx_polarity_flip_xe21=0x9 +phy_xaui_tx_polarity_flip_xe22=0x8 +phy_xaui_tx_polarity_flip_xe23=0x9 +phy_xaui_tx_polarity_flip_xe24=0x2 +phy_xaui_tx_polarity_flip_xe25=0x4 +phy_xaui_tx_polarity_flip_xe26=0xd +phy_xaui_tx_polarity_flip_xe27=0xc +phy_xaui_tx_polarity_flip_xe28=0x3 +phy_xaui_tx_polarity_flip_xe29=0xc +phy_xaui_tx_polarity_flip_xe30=0xc +phy_xaui_tx_polarity_flip_xe31=0x2 + +phy_xaui_rx_polarity_flip_xe0=0xb +phy_xaui_rx_polarity_flip_xe1=0xc +phy_xaui_rx_polarity_flip_xe2=0xc +phy_xaui_rx_polarity_flip_xe3=0xc +phy_xaui_rx_polarity_flip_xe4=0x1 +phy_xaui_rx_polarity_flip_xe5=0xc +phy_xaui_rx_polarity_flip_xe6=0x4 +phy_xaui_rx_polarity_flip_xe7=0xc +phy_xaui_rx_polarity_flip_xe8=0xb +phy_xaui_rx_polarity_flip_xe9=0x6 +phy_xaui_rx_polarity_flip_xe10=0x1 +phy_xaui_rx_polarity_flip_xe11=0x8 +phy_xaui_rx_polarity_flip_xe12=0xc +phy_xaui_rx_polarity_flip_xe13=0x6 +phy_xaui_rx_polarity_flip_xe14=0x4 +phy_xaui_rx_polarity_flip_xe15=0xe +phy_xaui_rx_polarity_flip_xe16=0xe +phy_xaui_rx_polarity_flip_xe17=0x2 +phy_xaui_rx_polarity_flip_xe18=0x4 +phy_xaui_rx_polarity_flip_xe19=0x6 +phy_xaui_rx_polarity_flip_xe20=0xe +phy_xaui_rx_polarity_flip_xe21=0x3 +phy_xaui_rx_polarity_flip_xe22=0x3 +phy_xaui_rx_polarity_flip_xe23=0x3 +phy_xaui_rx_polarity_flip_xe24=0xb +phy_xaui_rx_polarity_flip_xe25=0xc +phy_xaui_rx_polarity_flip_xe26=0xe +phy_xaui_rx_polarity_flip_xe27=0xc +phy_xaui_rx_polarity_flip_xe28=0xb +phy_xaui_rx_polarity_flip_xe29=0x9 +phy_xaui_rx_polarity_flip_xe30=0x6 +phy_xaui_rx_polarity_flip_xe31=0x9 + +# EQ/iDriver +# 0 ~ 5 +serdes_preemphasis_1=0x1E5200 +serdes_preemphasis_2=0x1E5200 +serdes_preemphasis_3=0x1E5200 +serdes_preemphasis_4=0x1E5200 +serdes_driver_current_1=0x000001 +serdes_driver_current_2=0x000001 +serdes_driver_current_3=0x000001 +serdes_driver_current_4=0x000001 + +serdes_preemphasis_5=0x1E5200 +serdes_preemphasis_6=0x1E5200 +serdes_preemphasis_7=0x1E5200 +serdes_preemphasis_8=0x1E5200 +serdes_driver_current_5=0x000001 +serdes_driver_current_6=0x000001 +serdes_driver_current_7=0x000001 +serdes_driver_current_8=0x000001 + +serdes_preemphasis_9=0x1E5200 +serdes_preemphasis_10=0x1E5200 +serdes_preemphasis_11=0x1E5200 +serdes_preemphasis_12=0x1E5200 +serdes_driver_current_9=0x000001 +serdes_driver_current_10=0x000001 +serdes_driver_current_11=0x000001 +serdes_driver_current_12=0x000001 + +serdes_preemphasis_13=0x1E5200 +serdes_preemphasis_14=0x1E5200 +serdes_preemphasis_15=0x1E5200 +serdes_preemphasis_16=0x1E5200 +serdes_driver_current_13=0x000001 +serdes_driver_current_14=0x000001 +serdes_driver_current_15=0x000001 +serdes_driver_current_16=0x000001 + +serdes_preemphasis_17=0x1E5200 +serdes_preemphasis_18=0x1E5200 +serdes_preemphasis_19=0x1E5200 +serdes_preemphasis_20=0x1E5200 +serdes_driver_current_17=0x000001 +serdes_driver_current_18=0x000001 +serdes_driver_current_19=0x000001 +serdes_driver_current_20=0x000001 + +serdes_preemphasis_21=0x1E5200 +serdes_preemphasis_22=0x1E5200 +serdes_preemphasis_23=0x1E5200 +serdes_preemphasis_24=0x1E5200 +serdes_driver_current_21=0x000001 +serdes_driver_current_22=0x000001 +serdes_driver_current_23=0x000001 +serdes_driver_current_24=0x000001 + +# 6 ~ 11 +serdes_preemphasis_25=0x1A5600 +serdes_preemphasis_26=0x1A5600 +serdes_preemphasis_27=0x1A5600 +serdes_preemphasis_28=0x1A5600 +serdes_driver_current_25=0x000001 +serdes_driver_current_26=0x000001 +serdes_driver_current_27=0x000001 +serdes_driver_current_28=0x000001 + +serdes_preemphasis_29=0x1A5600 +serdes_preemphasis_30=0x1A5600 +serdes_preemphasis_31=0x1A5600 +serdes_preemphasis_32=0x1A5600 +serdes_driver_current_29=0x000001 +serdes_driver_current_30=0x000001 +serdes_driver_current_31=0x000001 +serdes_driver_current_32=0x000001 + +serdes_preemphasis_34=0x1A5600 +serdes_preemphasis_35=0x1A5600 +serdes_preemphasis_36=0x1A5600 +serdes_preemphasis_37=0x1A5600 +serdes_driver_current_34=0x000001 +serdes_driver_current_35=0x000001 +serdes_driver_current_36=0x000001 +serdes_driver_current_37=0x000001 + +serdes_preemphasis_38=0x1A5600 +serdes_preemphasis_39=0x1A5600 +serdes_preemphasis_40=0x1A5600 +serdes_preemphasis_41=0x1A5600 +serdes_driver_current_38=0x000001 +serdes_driver_current_39=0x000001 +serdes_driver_current_40=0x000001 +serdes_driver_current_41=0x000001 + +serdes_preemphasis_42=0x1A5600 +serdes_preemphasis_43=0x1A5600 +serdes_preemphasis_44=0x1A5600 +serdes_preemphasis_45=0x1A5600 +serdes_driver_current_42=0x000001 +serdes_driver_current_43=0x000001 +serdes_driver_current_44=0x000001 +serdes_driver_current_45=0x000001 + +serdes_preemphasis_46=0x1A5600 +serdes_preemphasis_47=0x1A5600 +serdes_preemphasis_48=0x1A5600 +serdes_preemphasis_49=0x1A5600 +serdes_driver_current_46=0x000001 +serdes_driver_current_47=0x000001 +serdes_driver_current_48=0x000001 +serdes_driver_current_49=0x000001 + +# 12 ~ 13 +serdes_preemphasis_50=0x165A00 +serdes_preemphasis_51=0x165A00 +serdes_preemphasis_52=0x165A00 +serdes_preemphasis_53=0x165A00 +serdes_driver_current_50=0x000000 +serdes_driver_current_51=0x000000 +serdes_driver_current_52=0x000000 +serdes_driver_current_53=0x000000 + +serdes_preemphasis_54=0x165A00 +serdes_preemphasis_55=0x165A00 +serdes_preemphasis_56=0x165A00 +serdes_preemphasis_57=0x165A00 +serdes_driver_current_54=0x000000 +serdes_driver_current_55=0x000000 +serdes_driver_current_56=0x000000 +serdes_driver_current_57=0x000000 + +# 14 ~ 16 +serdes_preemphasis_58=0x125E00 +serdes_preemphasis_59=0x125E00 +serdes_preemphasis_60=0x125E00 +serdes_preemphasis_61=0x125E00 +serdes_driver_current_58=0x000100 +serdes_driver_current_59=0x000100 +serdes_driver_current_60=0x000100 +serdes_driver_current_61=0x000100 + +serdes_preemphasis_62=0x125E00 +serdes_preemphasis_63=0x125E00 +serdes_preemphasis_64=0x125E00 +serdes_preemphasis_65=0x125E00 +serdes_driver_current_62=0x000100 +serdes_driver_current_63=0x000100 +serdes_driver_current_64=0x000100 +serdes_driver_current_65=0x000100 + +serdes_preemphasis_68=0x125E00 +serdes_preemphasis_69=0x125E00 +serdes_preemphasis_70=0x125E00 +serdes_preemphasis_71=0x125E00 +serdes_driver_current_68=0x000100 +serdes_driver_current_69=0x000100 +serdes_driver_current_70=0x000100 +serdes_driver_current_71=0x000100 + +# 17 ~ 21 +serdes_preemphasis_72=0x106000 +serdes_preemphasis_73=0x106000 +serdes_preemphasis_74=0x106000 +serdes_preemphasis_75=0x106000 +serdes_driver_current_72=0x000100 +serdes_driver_current_73=0x000100 +serdes_driver_current_74=0x000100 +serdes_driver_current_75=0x000100 + +serdes_preemphasis_76=0x106000 +serdes_preemphasis_77=0x106000 +serdes_preemphasis_78=0x106000 +serdes_preemphasis_79=0x106000 +serdes_driver_current_76=0x000100 +serdes_driver_current_77=0x000100 +serdes_driver_current_78=0x000100 +serdes_driver_current_79=0x000100 + +serdes_preemphasis_80=0x106000 +serdes_preemphasis_81=0x106000 +serdes_preemphasis_82=0x106000 +serdes_preemphasis_83=0x106000 +serdes_driver_current_80=0x000100 +serdes_driver_current_81=0x000100 +serdes_driver_current_82=0x000100 +serdes_driver_current_83=0x000100 + +serdes_preemphasis_84=0x106000 +serdes_preemphasis_85=0x106000 +serdes_preemphasis_86=0x106000 +serdes_preemphasis_87=0x106000 +serdes_driver_current_84=0x000100 +serdes_driver_current_85=0x000100 +serdes_driver_current_86=0x000100 +serdes_driver_current_87=0x000100 + +serdes_preemphasis_88=0x106000 +serdes_preemphasis_89=0x106000 +serdes_preemphasis_90=0x106000 +serdes_preemphasis_91=0x106000 +serdes_driver_current_88=0x000100 +serdes_driver_current_89=0x000100 +serdes_driver_current_90=0x000100 +serdes_driver_current_91=0x000100 + +# 22 ~ 23 +serdes_preemphasis_92=0x125E00 +serdes_preemphasis_93=0x125E00 +serdes_preemphasis_94=0x125E00 +serdes_preemphasis_95=0x125E00 +serdes_driver_current_92=0x000100 +serdes_driver_current_93=0x000100 +serdes_driver_current_94=0x000100 +serdes_driver_current_95=0x000100 + +serdes_preemphasis_96=0x125E00 +serdes_preemphasis_97=0x125E00 +serdes_preemphasis_98=0x125E00 +serdes_preemphasis_99=0x125E00 +serdes_driver_current_96=0x000100 +serdes_driver_current_97=0x000100 +serdes_driver_current_98=0x000100 +serdes_driver_current_99=0x000100 + +# 24 ~ 25 +serdes_preemphasis_102=0x165A00 +serdes_preemphasis_103=0x165A00 +serdes_preemphasis_104=0x165A00 +serdes_preemphasis_105=0x165A00 +serdes_driver_current_102=0x000000 +serdes_driver_current_103=0x000000 +serdes_driver_current_104=0x000000 +serdes_driver_current_105=0x000000 + +serdes_preemphasis_106=0x165A00 +serdes_preemphasis_107=0x165A00 +serdes_preemphasis_108=0x165A00 +serdes_preemphasis_109=0x165A00 +serdes_driver_current_106=0x000000 +serdes_driver_current_107=0x000000 +serdes_driver_current_108=0x000000 +serdes_driver_current_109=0x000000 + +# 26 ~ 29 +serdes_preemphasis_110=0x1A5600 +serdes_preemphasis_111=0x1A5600 +serdes_preemphasis_112=0x1A5600 +serdes_preemphasis_113=0x1A5600 +serdes_driver_current_110=0x000001 +serdes_driver_current_111=0x000001 +serdes_driver_current_112=0x000001 +serdes_driver_current_113=0x000001 + +serdes_preemphasis_114=0x1A5600 +serdes_preemphasis_115=0x1A5600 +serdes_preemphasis_116=0x1A5600 +serdes_preemphasis_117=0x1A5600 +serdes_driver_current_114=0x000001 +serdes_driver_current_115=0x000001 +serdes_driver_current_116=0x000001 +serdes_driver_current_117=0x000001 + +serdes_preemphasis_118=0x1A5600 +serdes_preemphasis_119=0x1A5600 +serdes_preemphasis_120=0x1A5600 +serdes_preemphasis_121=0x1A5600 +serdes_driver_current_118=0x000001 +serdes_driver_current_119=0x000001 +serdes_driver_current_120=0x000001 +serdes_driver_current_121=0x000001 + +serdes_preemphasis_122=0x1A5600 +serdes_preemphasis_123=0x1A5600 +serdes_preemphasis_124=0x1A5600 +serdes_preemphasis_125=0x1A5600 +serdes_driver_current_122=0x000001 +serdes_driver_current_123=0x000001 +serdes_driver_current_124=0x000001 +serdes_driver_current_125=0x000001 + +# 30 ~ 31 +serdes_preemphasis_126=0x1E5200 +serdes_preemphasis_127=0x1E5200 +serdes_preemphasis_128=0x1E5200 +serdes_preemphasis_129=0x1E5200 +serdes_driver_current_126=0x000001 +serdes_driver_current_127=0x000001 +serdes_driver_current_128=0x000001 +serdes_driver_current_129=0x000001 + +serdes_preemphasis_130=0x1E5200 +serdes_preemphasis_131=0x1E5200 +serdes_preemphasis_132=0x1E5200 +serdes_preemphasis_133=0x1E5200 +serdes_driver_current_130=0x000001 +serdes_driver_current_131=0x000001 +serdes_driver_current_132=0x000001 +serdes_driver_current_133=0x000001 diff --git a/device/inventec/x86_64-inventec_d7032q28b-r0/led_proc_init.soc b/device/inventec/x86_64-inventec_d7032q28b-r0/led_proc_init.soc new file mode 100644 index 000000000000..39ae1f247929 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7032q28b-r0/led_proc_init.soc @@ -0,0 +1,136 @@ +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_0=31 +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_1=30 +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_2=29 +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=28 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_4=27 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_5=26 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_6=25 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=24 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_8=23 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_9=22 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_10=21 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_11=20 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_12=19 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_13=18 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_14=17 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=16 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_16=15 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_17=14 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_18=13 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=12 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_20=11 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_21=10 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_22=9 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=8 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_24=7 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_25=6 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_26=5 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=4 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_28=3 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_29=2 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_30=1 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=0 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_32=63 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_33=62 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_34=61 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=60 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_36=59 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_37=58 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_38=57 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=56 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_40=55 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_41=54 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_42=53 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=52 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_44=51 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_45=50 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_46=49 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=48 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_48=47 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_49=46 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_50=45 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=44 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_52=43 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_53=42 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_54=41 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=40 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_56=39 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_57=38 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_58=37 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=36 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_60=35 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_61=34 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_62=33 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=32 +m CMIC_LEDUP1_PORT_ORDER_REMAP_0_3 REMAP_PORT_0=3 +m CMIC_LEDUP1_PORT_ORDER_REMAP_0_3 REMAP_PORT_1=2 +m CMIC_LEDUP1_PORT_ORDER_REMAP_0_3 REMAP_PORT_2=1 +m CMIC_LEDUP1_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=0 +m CMIC_LEDUP1_PORT_ORDER_REMAP_4_7 REMAP_PORT_4=7 +m CMIC_LEDUP1_PORT_ORDER_REMAP_4_7 REMAP_PORT_5=6 +m CMIC_LEDUP1_PORT_ORDER_REMAP_4_7 REMAP_PORT_6=5 +m CMIC_LEDUP1_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=4 +m CMIC_LEDUP1_PORT_ORDER_REMAP_8_11 REMAP_PORT_8=11 +m CMIC_LEDUP1_PORT_ORDER_REMAP_8_11 REMAP_PORT_9=10 +m CMIC_LEDUP1_PORT_ORDER_REMAP_8_11 REMAP_PORT_10=9 +m CMIC_LEDUP1_PORT_ORDER_REMAP_8_11 REMAP_PORT_11=8 +m CMIC_LEDUP1_PORT_ORDER_REMAP_12_15 REMAP_PORT_12=15 +m CMIC_LEDUP1_PORT_ORDER_REMAP_12_15 REMAP_PORT_13=14 +m CMIC_LEDUP1_PORT_ORDER_REMAP_12_15 REMAP_PORT_14=13 +m CMIC_LEDUP1_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=12 +m CMIC_LEDUP1_PORT_ORDER_REMAP_16_19 REMAP_PORT_16=19 +m CMIC_LEDUP1_PORT_ORDER_REMAP_16_19 REMAP_PORT_17=18 +m CMIC_LEDUP1_PORT_ORDER_REMAP_16_19 REMAP_PORT_18=17 +m CMIC_LEDUP1_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=16 +m CMIC_LEDUP1_PORT_ORDER_REMAP_20_23 REMAP_PORT_20=23 +m CMIC_LEDUP1_PORT_ORDER_REMAP_20_23 REMAP_PORT_21=22 +m CMIC_LEDUP1_PORT_ORDER_REMAP_20_23 REMAP_PORT_22=21 +m CMIC_LEDUP1_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=20 +m CMIC_LEDUP1_PORT_ORDER_REMAP_24_27 REMAP_PORT_24=27 +m CMIC_LEDUP1_PORT_ORDER_REMAP_24_27 REMAP_PORT_25=26 +m CMIC_LEDUP1_PORT_ORDER_REMAP_24_27 REMAP_PORT_26=25 +m CMIC_LEDUP1_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=24 +m CMIC_LEDUP1_PORT_ORDER_REMAP_28_31 REMAP_PORT_28=31 +m CMIC_LEDUP1_PORT_ORDER_REMAP_28_31 REMAP_PORT_29=30 +m CMIC_LEDUP1_PORT_ORDER_REMAP_28_31 REMAP_PORT_30=29 +m CMIC_LEDUP1_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=28 +m CMIC_LEDUP1_PORT_ORDER_REMAP_32_35 REMAP_PORT_32=35 +m CMIC_LEDUP1_PORT_ORDER_REMAP_32_35 REMAP_PORT_33=34 +m CMIC_LEDUP1_PORT_ORDER_REMAP_32_35 REMAP_PORT_34=33 +m CMIC_LEDUP1_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=32 +m CMIC_LEDUP1_PORT_ORDER_REMAP_36_39 REMAP_PORT_36=39 +m CMIC_LEDUP1_PORT_ORDER_REMAP_36_39 REMAP_PORT_37=38 +m CMIC_LEDUP1_PORT_ORDER_REMAP_36_39 REMAP_PORT_38=37 +m CMIC_LEDUP1_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=36 +m CMIC_LEDUP1_PORT_ORDER_REMAP_40_43 REMAP_PORT_40=43 +m CMIC_LEDUP1_PORT_ORDER_REMAP_40_43 REMAP_PORT_41=42 +m CMIC_LEDUP1_PORT_ORDER_REMAP_40_43 REMAP_PORT_42=41 +m CMIC_LEDUP1_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=40 +m CMIC_LEDUP1_PORT_ORDER_REMAP_44_47 REMAP_PORT_44=47 +m CMIC_LEDUP1_PORT_ORDER_REMAP_44_47 REMAP_PORT_45=46 +m CMIC_LEDUP1_PORT_ORDER_REMAP_44_47 REMAP_PORT_46=45 +m CMIC_LEDUP1_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=44 +m CMIC_LEDUP1_PORT_ORDER_REMAP_48_51 REMAP_PORT_48=51 +m CMIC_LEDUP1_PORT_ORDER_REMAP_48_51 REMAP_PORT_49=50 +m CMIC_LEDUP1_PORT_ORDER_REMAP_48_51 REMAP_PORT_50=49 +m CMIC_LEDUP1_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=48 +m CMIC_LEDUP1_PORT_ORDER_REMAP_52_55 REMAP_PORT_52=55 +m CMIC_LEDUP1_PORT_ORDER_REMAP_52_55 REMAP_PORT_53=54 +m CMIC_LEDUP1_PORT_ORDER_REMAP_52_55 REMAP_PORT_54=53 +m CMIC_LEDUP1_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=52 +m CMIC_LEDUP1_PORT_ORDER_REMAP_56_59 REMAP_PORT_56=59 +m CMIC_LEDUP1_PORT_ORDER_REMAP_56_59 REMAP_PORT_57=58 +m CMIC_LEDUP1_PORT_ORDER_REMAP_56_59 REMAP_PORT_58=57 +m CMIC_LEDUP1_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=56 +m CMIC_LEDUP1_PORT_ORDER_REMAP_60_63 REMAP_PORT_60=63 +m CMIC_LEDUP1_PORT_ORDER_REMAP_60_63 REMAP_PORT_61=62 +m CMIC_LEDUP1_PORT_ORDER_REMAP_60_63 REMAP_PORT_62=61 +m CMIC_LEDUP1_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=60 + +led 0 stop +led 0 prog 02 00 60 F1 12 00 DE F6 70 10 67 47 67 42 77 06 06 F2 60 F0 12 00 06 F0 4A 04 27 67 42 4A 03 27 67 42 4A 07 27 67 42 4A 00 27 67 42 DE F4 70 34 86 F0 77 16 12 00 DE F8 70 40 67 4A 67 42 77 36 3E F1 87 86 F1 81 57 17 27 57 07 27 57 00 00 00 +led 0 start + +led 1 stop +led 1 prog 02 00 60 F1 12 00 DE F6 70 10 67 47 67 42 77 06 06 F2 60 F0 12 00 06 F0 4A 04 27 67 42 4A 03 27 67 42 4A 07 27 67 42 4A 00 27 67 42 DE F4 70 34 86 F0 77 16 12 00 DE F8 70 40 67 4A 67 42 77 36 3E F1 87 86 F1 81 57 17 27 57 07 27 57 00 00 00 +led 1 start diff --git a/device/inventec/x86_64-inventec_d7032q28b-r0/plugins/sfputil.py b/device/inventec/x86_64-inventec_d7032q28b-r0/plugins/sfputil.py index 645c76b9f0db..599c8dbd959c 100644 --- a/device/inventec/x86_64-inventec_d7032q28b-r0/plugins/sfputil.py +++ b/device/inventec/x86_64-inventec_d7032q28b-r0/plugins/sfputil.py @@ -16,6 +16,8 @@ class SfpUtil(SfpUtilBase): PORT_START = 0 PORT_END = 31 PORTS_IN_BLOCK = 32 + QSFP_PORT_START = 0 + QSFP_PORT_END = 31 _port_to_eeprom_mapping = {} port_to_i2c_mapping = { @@ -61,6 +63,14 @@ def port_start(self): def port_end(self): return self.PORT_END + @property + def qsfp_port_start(self): + return self.QSFP_PORT_START + + @property + def qsfp_port_end(self): + return self.QSFP_PORT_END + @property def qsfp_ports(self): return range(0, self.PORTS_IN_BLOCK + 1) diff --git a/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/sai.profile b/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/sai.profile index 7e019adbbb94..73cbea239694 100644 --- a/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/sai.profile +++ b/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/sai.profile @@ -1,2 +1,2 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-d7054q28b-48x25g-6x100g.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-d7054q28b-48x25g-6x100g.config.bcm SAI_NUM_ECMP_MEMBERS=32 diff --git a/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/th-d7054q28b-48x10g-6x100g.config.bcm b/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/th-d7054q28b-48x10g-6x100g.config.bcm new file mode 100644 index 000000000000..b90ba92a97bc --- /dev/null +++ b/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/th-d7054q28b-48x10g-6x100g.config.bcm @@ -0,0 +1,465 @@ +# Cypress BCM Shell config / 10G * 48 ports; 100G * 6 ports + +# Define default OS / SAL +os=unix + +l2_mem_entries=40960 +l3_mem_entries=40960 +fpem_mem_entries=32768 +l2xmsg_mode=1 +mem_cache_enable=0 +parity_correction=0 +parity_enable=0 + +## update the hex string based on case ID: 925941 +## 1. type "phy info" then get each hg ports' number +## 2. Set these number as 1 in pbmp_xport_xe and pbmp_oversubscribe +## 130 xe ports, 4 * 32 + 2 +## no more pbmp_oversubscribe +oversubscribe_mode=1 +pbmp_xport_xe=0x3fffffffdffffffff7fffffffdfffffffe + + +# EagleCore ports: 36 & 49 +portmap_66=129:10 +portmap_100=131:10 + +# Loopback ports +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 + +# First 12*4 48 ports config for 10G +# Second 6 ports config for 100G +# For Tomahawk FalconCore: +# Physical ports in FalconCore[0 - 7] must map to logical port[1 - 32] at any order +# Physical ports in FalconCore[8 - 15] must map to logical port[34 - 65] at any order +# Physical ports in FalconCore[16 - 23] must map to logical port[68 - 99] at any order +# Physical ports in FalconCore[24 - 31] must map to logical port[102 - 133] at any order + +## FalconCore[0,1,2,5] +portmap_1=2:10 +portmap_2=1:10 +portmap_3=4:10 +portmap_4=3:10 +portmap_5=6:10 +portmap_6=5:10 +portmap_7=8:10 +portmap_8=7:10 +portmap_9=10:10 +portmap_10=9:10 +portmap_11=12:10 +portmap_12=11:10 +# FC-05 +portmap_13=22:10 +portmap_14=21:10 +portmap_15=24:10 +portmap_16=23:10 + +## FalconCore[8, 9, 10, 12, 13] +portmap_34=34:10 +portmap_35=33:10 +portmap_36=36:10 +portmap_37=35:10 +portmap_38=38:10 +portmap_39=37:10 +portmap_40=40:10 +portmap_41=39:10 +portmap_42=42:10 +portmap_43=41:10 +portmap_44=44:10 +portmap_45=43:10 +# FC-12 & FC-13 +portmap_46=50:10 +portmap_47=49:10 +portmap_48=52:10 +portmap_49=51:10 +portmap_50=54:10 +portmap_51=53:10 +portmap_52=56:10 +portmap_53=55:10 + +## FalconCore[16, 17, 20] +portmap_68=66:10 +portmap_69=65:10 +portmap_70=68:10 +portmap_71=67:10 +portmap_72=70:10 +portmap_73=69:10 +portmap_74=72:10 +portmap_75=71:10 +# FC-20 +portmap_76=82:10 +portmap_77=81:10 +portmap_78=84:10 +portmap_79=83:10 + +# FC-21 (100G) +portmap_80=85:100 + +## FalconCore[24, 25, 26, 27, 29] (100G) +portmap_102=97:100 +portmap_103=105:100 +portmap_104=101:100 +portmap_105=117:100 +portmap_107=109:100 + + + +# FalconCore[0,1,2,5] ports TX polarity flip for 25G +# no polarity reversal + +# FalconCore[8, 9, 10, 12, 13] ports TX polarity flip for 25G +# For Baidu xe20 & xe22; for GA xe21 & xe23 +phy_xaui_tx_polarity_flip_xe20=1 +phy_xaui_tx_polarity_flip_xe22=1 + +# FalconCore[16, 17, 20] ports TX polarity flip for 25G +# no polarity reversal + +# FC-21 for 100G + +# FalconCore[24, 25, 26, 27, 29] ports TX polarity flip for 100G +phy_xaui_tx_polarity_flip_ce1=0xf +phy_xaui_tx_polarity_flip_ce2=0xf + + +# FalconCore[0,1,2,5] ports RX polarity flip for 25G +# no polarity reversal + +# FalconCore[8, 9, 10, 12, 13] ports RX polarity flip for 25G +# no polarity reversal + +# FalconCore[16, 17, 20] ports RX polarity flip for 25G +# no polarity reversal + +# FC-21 for 100G + +# FalconCore[24, 25, 26, 27, 29] ports RX polarity flip for 100G +phy_xaui_rx_polarity_flip_ce2=0xf + + +## Lane swapping +## The HEX value is connection of red line within Falconcore in "Fig 3-4 SFP28 port connection" +# TX - Config A. (FC 0/1/2/16) +# 0x3210 - port 0-11, 36-39 +xgxs_tx_lane_map_xe0=0x3210 +xgxs_tx_lane_map_xe1=0x3210 +xgxs_tx_lane_map_xe2=0x3210 +xgxs_tx_lane_map_xe3=0x3210 +xgxs_tx_lane_map_xe4=0x3210 +xgxs_tx_lane_map_xe5=0x3210 +xgxs_tx_lane_map_xe6=0x3210 +xgxs_tx_lane_map_xe7=0x3210 +xgxs_tx_lane_map_xe8=0x3210 +xgxs_tx_lane_map_xe9=0x3210 +xgxs_tx_lane_map_xe10=0x3210 +xgxs_tx_lane_map_xe11=0x3210 +xgxs_tx_lane_map_xe37=0x3210 +xgxs_tx_lane_map_xe38=0x3210 +xgxs_tx_lane_map_xe39=0x3210 +xgxs_tx_lane_map_xe40=0x3210 + + +# TX - Config B. (FC 5/9/20) +# 0x0123 - port 12-13, 20-23, 44-47 +xgxs_tx_lane_map_xe12=0x0123 +xgxs_tx_lane_map_xe13=0x0123 +xgxs_tx_lane_map_xe14=0x0123 +xgxs_tx_lane_map_xe15=0x0123 +xgxs_tx_lane_map_xe20=0x0123 +xgxs_tx_lane_map_xe21=0x0123 +xgxs_tx_lane_map_xe22=0x0123 +xgxs_tx_lane_map_xe23=0x0123 +xgxs_tx_lane_map_xe45=0x0123 +xgxs_tx_lane_map_xe46=0x0123 +xgxs_tx_lane_map_xe47=0x0123 +xgxs_tx_lane_map_xe48=0x0123 + + +# TX - Config C. (FC 8/10) +# 0x3210 - port 16-19, 24-27 +xgxs_tx_lane_map_xe16=0x3210 +xgxs_tx_lane_map_xe17=0x3210 +xgxs_tx_lane_map_xe18=0x3210 +xgxs_tx_lane_map_xe19=0x3210 +xgxs_tx_lane_map_xe24=0x3210 +xgxs_tx_lane_map_xe25=0x3210 +xgxs_tx_lane_map_xe26=0x3210 +xgxs_tx_lane_map_xe27=0x3210 + + +# TX - Config D. (FC 12/13/17) +# 0x0123 - port 28-35, 40-43 +xgxs_tx_lane_map_xe28=0x0123 +xgxs_tx_lane_map_xe29=0x0123 +xgxs_tx_lane_map_xe30=0x0123 +xgxs_tx_lane_map_xe31=0x0123 +xgxs_tx_lane_map_xe32=0x0123 +xgxs_tx_lane_map_xe33=0x0123 +xgxs_tx_lane_map_xe34=0x0123 +xgxs_tx_lane_map_xe35=0x0123 +xgxs_tx_lane_map_xe41=0x0123 +xgxs_tx_lane_map_xe42=0x0123 +xgxs_tx_lane_map_xe43=0x0123 +xgxs_tx_lane_map_xe44=0x0123 + + + + +# RX - Config A. (FC 0/1/2/16) +# 0x1032 - port 0-11, 36-39 +xgxs_rx_lane_map_xe0=0x1032 +xgxs_rx_lane_map_xe1=0x1032 +xgxs_rx_lane_map_xe2=0x1032 +xgxs_rx_lane_map_xe3=0x1032 +xgxs_rx_lane_map_xe4=0x1032 +xgxs_rx_lane_map_xe5=0x1032 +xgxs_rx_lane_map_xe6=0x1032 +xgxs_rx_lane_map_xe7=0x1032 +xgxs_rx_lane_map_xe8=0x1032 +xgxs_rx_lane_map_xe9=0x1032 +xgxs_rx_lane_map_xe10=0x1032 +xgxs_rx_lane_map_xe11=0x1032 +xgxs_rx_lane_map_xe37=0x1032 +xgxs_rx_lane_map_xe38=0x1032 +xgxs_rx_lane_map_xe39=0x1032 +xgxs_rx_lane_map_xe40=0x1032 + + + +# RX - Config B. (FC 5/9/20) +# 0x1032 - port 12-13, 20-23, 44-47 +xgxs_rx_lane_map_xe12=0x1032 +xgxs_rx_lane_map_xe13=0x1032 +xgxs_rx_lane_map_xe14=0x1032 +xgxs_rx_lane_map_xe15=0x1032 +xgxs_rx_lane_map_xe20=0x1032 +xgxs_rx_lane_map_xe21=0x1032 +xgxs_rx_lane_map_xe22=0x1032 +xgxs_rx_lane_map_xe23=0x1032 +xgxs_rx_lane_map_xe45=0x1032 +xgxs_rx_lane_map_xe46=0x1032 +xgxs_rx_lane_map_xe47=0x1032 +xgxs_rx_lane_map_xe48=0x1032 + + +# RX - Config C. (FC 8/10) +# 0x3210 - port 16-19, 24-27 +xgxs_rx_lane_map_xe16=0x3210 +xgxs_rx_lane_map_xe17=0x3210 +xgxs_rx_lane_map_xe18=0x3210 +xgxs_rx_lane_map_xe19=0x3210 +xgxs_rx_lane_map_xe24=0x3210 +xgxs_rx_lane_map_xe25=0x3210 +xgxs_rx_lane_map_xe26=0x3210 +xgxs_rx_lane_map_xe27=0x3210 + + +# RX - Config D. (FC 12/13/17) +# 0x3210 - port 28-35, 40-43 +xgxs_rx_lane_map_xe28=0x3210 +xgxs_rx_lane_map_xe29=0x3210 +xgxs_rx_lane_map_xe30=0x3210 +xgxs_rx_lane_map_xe31=0x3210 +xgxs_rx_lane_map_xe32=0x3210 +xgxs_rx_lane_map_xe33=0x3210 +xgxs_rx_lane_map_xe34=0x3210 +xgxs_rx_lane_map_xe35=0x3210 +xgxs_rx_lane_map_xe41=0x3210 +xgxs_rx_lane_map_xe42=0x3210 +xgxs_rx_lane_map_xe43=0x3210 +xgxs_rx_lane_map_xe44=0x3210 + + +## Lane swapping for QSFP28 (100G) +## The HEX value is connection of red line within Falconcore in "Fig 3-4 SFP28 port connection" +# TX - Config A. (FC 21/25) +# 0x3210 - port ce0, ce3 +xgxs_tx_lane_map_ce0=0x3210 +xgxs_tx_lane_map_ce3=0x3210 + + +# TX - Config B. (FC 24) +# 0x3210 - port ce1 +xgxs_tx_lane_map_ce1=0x3210 + + +# TX - Config C. (FC 26) +# 0x3210 - port ce2 +xgxs_tx_lane_map_ce2=0x3210 + + +# TX - Config D. (FC 27) +# 0x3210 - ce5 +xgxs_tx_lane_map_ce5=0x3210 + + +# TX - Config E. (FC 29) +# 0x3210 - ce4 +xgxs_tx_lane_map_ce4=0x3210 + + +# RX - Config A. (FC 21/25) +# 0x1032 - port ce0, ce3 +xgxs_rx_lane_map_ce0=0x1032 +xgxs_rx_lane_map_ce3=0x1032 + + +# RX - Config B. (FC 24) +# 0x1032 - port ce1 +xgxs_rx_lane_map_ce1=0x1032 + + +# RX - Config C. (FC 26) +# 0x2301 - port ce2 +xgxs_rx_lane_map_ce2=0x2301 + + +# RX - Config D. (FC 27) +# 0x2301 - ce5 +xgxs_rx_lane_map_ce5=0x2301 + + +# TX - Config E. (FC 29) +# 0x3210 - ce4 +xgxs_rx_lane_map_ce4=0x3210 + +# EQ/iDriver + +# The 1st 16 ports, xe0-xe15 +serdes_preemphasis_1=0x1A5600 +serdes_preemphasis_2=0x1A5600 +serdes_preemphasis_3=0x1A5600 +serdes_preemphasis_4=0x1A5600 +serdes_preemphasis_5=0x1A5600 +serdes_preemphasis_6=0x1A5600 +serdes_preemphasis_7=0x185800 +serdes_preemphasis_8=0x1A5600 +serdes_preemphasis_9=0x185800 +serdes_preemphasis_10=0x185800 +serdes_preemphasis_11=0x165A00 +serdes_preemphasis_12=0x185800 +serdes_preemphasis_13=0x105F01 +serdes_preemphasis_14=0x165A00 +serdes_preemphasis_15=0x105F01 +serdes_preemphasis_16=0x105F01 + +serdes_driver_current_1=0x000001 +serdes_driver_current_2=0x000001 +serdes_driver_current_3=0x000001 +serdes_driver_current_4=0x000001 +serdes_driver_current_5=0x000001 +serdes_driver_current_6=0x000001 +serdes_driver_current_7=0x000001 +serdes_driver_current_8=0x000001 +serdes_driver_current_9=0x000000 +serdes_driver_current_10=0x000001 +serdes_driver_current_11=0x000000 +serdes_driver_current_12=0x000000 +serdes_driver_current_13=0x000000 +serdes_driver_current_14=0x000000 +serdes_driver_current_15=0x000000 +serdes_driver_current_16=0x000000 + +# The 2nd 20 ports, xe16-xe35 +serdes_preemphasis_34=0x105F01 +serdes_preemphasis_35=0x105F01 +serdes_preemphasis_36=0x0E6002 +serdes_preemphasis_37=0x0E6002 +serdes_preemphasis_38=0x0E6002 +serdes_preemphasis_39=0x0E6002 +serdes_preemphasis_40=0x125B03 +serdes_preemphasis_41=0x0E6002 +serdes_preemphasis_42=0x125B03 +serdes_preemphasis_43=0x125B03 +serdes_preemphasis_44=0x125B03 +serdes_preemphasis_45=0x125B03 +serdes_preemphasis_46=0x125B03 +serdes_preemphasis_47=0x125B03 +serdes_preemphasis_48=0x125B03 +serdes_preemphasis_49=0x125B03 +serdes_preemphasis_50=0x125B03 +serdes_preemphasis_51=0x125B03 +serdes_preemphasis_52=0x125B03 +serdes_preemphasis_53=0x125B03 + +serdes_driver_current_34=0x000000 +serdes_driver_current_35=0x000000 +serdes_driver_current_36=0x000000 +serdes_driver_current_37=0x000000 +serdes_driver_current_38=0x000000 +serdes_driver_current_39=0x000000 +serdes_driver_current_40=0x000000 +serdes_driver_current_41=0x000000 +serdes_driver_current_42=0x000000 +serdes_driver_current_43=0x000000 +serdes_driver_current_44=0x000000 +serdes_driver_current_45=0x000000 +serdes_driver_current_46=0x000000 +serdes_driver_current_47=0x000000 +serdes_driver_current_48=0x000000 +serdes_driver_current_49=0x000000 +serdes_driver_current_50=0x000000 +serdes_driver_current_51=0x000000 +serdes_driver_current_52=0x000000 +serdes_driver_current_53=0x000000 + +# The 3rd 12 ports, xe36-xe47 +serdes_preemphasis_68=0x125B03 +serdes_preemphasis_69=0x125B03 +serdes_preemphasis_70=0x125B03 +serdes_preemphasis_71=0x125B03 +serdes_preemphasis_72=0x125B03 +serdes_preemphasis_73=0x125B03 +serdes_preemphasis_74=0x125B03 +serdes_preemphasis_75=0x125B03 +serdes_preemphasis_76=0x105F01 +serdes_preemphasis_77=0x105F01 +serdes_preemphasis_78=0x105F01 +serdes_preemphasis_79=0x105F01 + +serdes_driver_current_68=0x000000 +serdes_driver_current_69=0x000000 +serdes_driver_current_70=0x000000 +serdes_driver_current_71=0x000000 +serdes_driver_current_72=0x000000 +serdes_driver_current_73=0x000000 +serdes_driver_current_74=0x000000 +serdes_driver_current_75=0x000000 +serdes_driver_current_76=0x000000 +serdes_driver_current_77=0x000000 +serdes_driver_current_78=0x000000 +serdes_driver_current_79=0x000000 + +# 6 x 100G ports, expandable to 24 x 25G ports +serdes_preemphasis_80=0x2D4300 +serdes_preemphasis_81=0x2D4300 +serdes_preemphasis_82=0x2D4300 +serdes_preemphasis_83=0x2D4300 + +serdes_preemphasis_102=0x304000 +serdes_preemphasis_103=0x304000 +serdes_preemphasis_104=0x304000 +serdes_preemphasis_105=0x304000 + +serdes_preemphasis_106=0x304000 +serdes_preemphasis_107=0x304000 +serdes_preemphasis_108=0x304000 +serdes_preemphasis_109=0x304000 + +serdes_preemphasis_110=0x304000 +serdes_preemphasis_111=0x304000 +serdes_preemphasis_112=0x304000 +serdes_preemphasis_113=0x304000 + +serdes_preemphasis_114=0x2E360C +serdes_preemphasis_115=0x2E360C +serdes_preemphasis_116=0x2E360C +serdes_preemphasis_117=0x2E360C + +serdes_preemphasis_118=0x2E360C +serdes_preemphasis_119=0x2E360C +serdes_preemphasis_120=0x2E360C +serdes_preemphasis_121=0x2E360C diff --git a/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/th-d7054q28b-48x25g-6x100g.config.bcm b/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/th-d7054q28b-48x25g-6x100g.config.bcm new file mode 100644 index 000000000000..ff09305ccbff --- /dev/null +++ b/device/inventec/x86_64-inventec_d7054q28b-r0/INVENTEC-D7054Q28B-S48-Q6/th-d7054q28b-48x25g-6x100g.config.bcm @@ -0,0 +1,414 @@ +# Cypress BCM Shell config / 25G * 48 ports; 100G * 6 ports + +# Define default OS / SAL +os=unix + +l2_mem_entries=40960 +l3_mem_entries=40960 +fpem_mem_entries=32768 +l2xmsg_mode=1 +mem_cache_enable=0 +parity_correction=0 +parity_enable=0 + +## update the hex string based on case ID: 925941 +## 1. type "phy info" then get each hg ports' number +## 2. Set these number as 1 in pbmp_xport_xe and pbmp_oversubscribe +## 130 xe ports, 4 * 32 + 2 +## no more pbmp_oversubscribe +oversubscribe_mode=1 +pbmp_xport_xe=0x3fffffffdffffffff7fffffffdfffffffe + + +# EagleCore ports: 36 & 49 +portmap_66=129:10 +portmap_100=131:10 + +# Loopback ports +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 + +# First 12*4 48 ports config for 25G +# Second 6 ports config for 100G +# For Tomahawk FalconCore: +# Physical ports in FalconCore[0 - 7] must map to logical port[1 - 32] at any order +# Physical ports in FalconCore[8 - 15] must map to logical port[34 - 65] at any order +# Physical ports in FalconCore[16 - 23] must map to logical port[68 - 99] at any order +# Physical ports in FalconCore[24 - 31] must map to logical port[102 - 133] at any order + +## FalconCore[0,1,2,5] +portmap_1=2:25 +portmap_2=1:25 +portmap_3=4:25 +portmap_4=3:25 +portmap_5=6:25 +portmap_6=5:25 +portmap_7=8:25 +portmap_8=7:25 +portmap_9=10:25 +portmap_10=9:25 +portmap_11=12:25 +portmap_12=11:25 +# FC-05 +portmap_13=22:25 +portmap_14=21:25 +portmap_15=24:25 +portmap_16=23:25 + +## FalconCore[8, 9, 10, 12, 13] +portmap_34=34:25 +portmap_35=33:25 +portmap_36=36:25 +portmap_37=35:25 +portmap_38=38:25 +portmap_39=37:25 +portmap_40=40:25 +portmap_41=39:25 +portmap_42=42:25 +portmap_43=41:25 +portmap_44=44:25 +portmap_45=43:25 +# FC-12 & FC-13 +portmap_46=50:25 +portmap_47=49:25 +portmap_48=52:25 +portmap_49=51:25 +portmap_50=54:25 +portmap_51=53:25 +portmap_52=56:25 +portmap_53=55:25 + +## FalconCore[16, 17, 20] +portmap_68=66:25 +portmap_69=65:25 +portmap_70=68:25 +portmap_71=67:25 +portmap_72=70:25 +portmap_73=69:25 +portmap_74=72:25 +portmap_75=71:25 +# FC-20 +portmap_76=82:25 +portmap_77=81:25 +portmap_78=84:25 +portmap_79=83:25 + +# FC-21 (100G) +portmap_80=85:100 + +## FalconCore[24, 25, 26, 27, 29] (100G) +portmap_102=97:100 +portmap_103=105:100 +portmap_104=101:100 +portmap_105=117:100 +portmap_107=109:100 + + + +# FalconCore[0,1,2,5] ports TX polarity flip for 25G +# no polarity reversal + +# FalconCore[8, 9, 10, 12, 13] ports TX polarity flip for 25G +# For Baidu xe20 & xe22; for GA xe21 & xe23 +phy_xaui_tx_polarity_flip_xe20=1 +phy_xaui_tx_polarity_flip_xe22=1 + +# FalconCore[16, 17, 20] ports TX polarity flip for 25G +# no polarity reversal + +# FC-21 for 100G + +# FalconCore[24, 25, 26, 27, 29] ports TX polarity flip for 100G +phy_xaui_tx_polarity_flip_ce1=0xf +phy_xaui_tx_polarity_flip_ce2=0xf + + +# FalconCore[0,1,2,5] ports RX polarity flip for 25G +# no polarity reversal + +# FalconCore[8, 9, 10, 12, 13] ports RX polarity flip for 25G +# no polarity reversal + +# FalconCore[16, 17, 20] ports RX polarity flip for 25G +# no polarity reversal + +# FC-21 for 100G + +# FalconCore[24, 25, 26, 27, 29] ports RX polarity flip for 100G +phy_xaui_rx_polarity_flip_ce2=0xf + + +## Lane swapping +## The HEX value is connection of red line within Falconcore in "Fig 3-4 SFP28 port connection" +# TX - Config A. (FC 0/1/2/16) +# 0x3210 - port 0-11, 36-39 +xgxs_tx_lane_map_xe0=0x3210 +xgxs_tx_lane_map_xe1=0x3210 +xgxs_tx_lane_map_xe2=0x3210 +xgxs_tx_lane_map_xe3=0x3210 +xgxs_tx_lane_map_xe4=0x3210 +xgxs_tx_lane_map_xe5=0x3210 +xgxs_tx_lane_map_xe6=0x3210 +xgxs_tx_lane_map_xe7=0x3210 +xgxs_tx_lane_map_xe8=0x3210 +xgxs_tx_lane_map_xe9=0x3210 +xgxs_tx_lane_map_xe10=0x3210 +xgxs_tx_lane_map_xe11=0x3210 +xgxs_tx_lane_map_xe37=0x3210 +xgxs_tx_lane_map_xe38=0x3210 +xgxs_tx_lane_map_xe39=0x3210 +xgxs_tx_lane_map_xe40=0x3210 + + +# TX - Config B. (FC 5/9/20) +# 0x0123 - port 12-13, 20-23, 44-47 +xgxs_tx_lane_map_xe12=0x0123 +xgxs_tx_lane_map_xe13=0x0123 +xgxs_tx_lane_map_xe14=0x0123 +xgxs_tx_lane_map_xe15=0x0123 +xgxs_tx_lane_map_xe20=0x0123 +xgxs_tx_lane_map_xe21=0x0123 +xgxs_tx_lane_map_xe22=0x0123 +xgxs_tx_lane_map_xe23=0x0123 +xgxs_tx_lane_map_xe45=0x0123 +xgxs_tx_lane_map_xe46=0x0123 +xgxs_tx_lane_map_xe47=0x0123 +xgxs_tx_lane_map_xe48=0x0123 + + +# TX - Config C. (FC 8/10) +# 0x3210 - port 16-19, 24-27 +xgxs_tx_lane_map_xe16=0x3210 +xgxs_tx_lane_map_xe17=0x3210 +xgxs_tx_lane_map_xe18=0x3210 +xgxs_tx_lane_map_xe19=0x3210 +xgxs_tx_lane_map_xe24=0x3210 +xgxs_tx_lane_map_xe25=0x3210 +xgxs_tx_lane_map_xe26=0x3210 +xgxs_tx_lane_map_xe27=0x3210 + + +# TX - Config D. (FC 12/13/17) +# 0x0123 - port 28-35, 40-43 +xgxs_tx_lane_map_xe28=0x0123 +xgxs_tx_lane_map_xe29=0x0123 +xgxs_tx_lane_map_xe30=0x0123 +xgxs_tx_lane_map_xe31=0x0123 +xgxs_tx_lane_map_xe32=0x0123 +xgxs_tx_lane_map_xe33=0x0123 +xgxs_tx_lane_map_xe34=0x0123 +xgxs_tx_lane_map_xe35=0x0123 +xgxs_tx_lane_map_xe41=0x0123 +xgxs_tx_lane_map_xe42=0x0123 +xgxs_tx_lane_map_xe43=0x0123 +xgxs_tx_lane_map_xe44=0x0123 + + + + +# RX - Config A. (FC 0/1/2/16) +# 0x1032 - port 0-11, 36-39 +xgxs_rx_lane_map_xe0=0x1032 +xgxs_rx_lane_map_xe1=0x1032 +xgxs_rx_lane_map_xe2=0x1032 +xgxs_rx_lane_map_xe3=0x1032 +xgxs_rx_lane_map_xe4=0x1032 +xgxs_rx_lane_map_xe5=0x1032 +xgxs_rx_lane_map_xe6=0x1032 +xgxs_rx_lane_map_xe7=0x1032 +xgxs_rx_lane_map_xe8=0x1032 +xgxs_rx_lane_map_xe9=0x1032 +xgxs_rx_lane_map_xe10=0x1032 +xgxs_rx_lane_map_xe11=0x1032 +xgxs_rx_lane_map_xe37=0x1032 +xgxs_rx_lane_map_xe38=0x1032 +xgxs_rx_lane_map_xe39=0x1032 +xgxs_rx_lane_map_xe40=0x1032 + + + +# RX - Config B. (FC 5/9/20) +# 0x1032 - port 12-13, 20-23, 44-47 +xgxs_rx_lane_map_xe12=0x1032 +xgxs_rx_lane_map_xe13=0x1032 +xgxs_rx_lane_map_xe14=0x1032 +xgxs_rx_lane_map_xe15=0x1032 +xgxs_rx_lane_map_xe20=0x1032 +xgxs_rx_lane_map_xe21=0x1032 +xgxs_rx_lane_map_xe22=0x1032 +xgxs_rx_lane_map_xe23=0x1032 +xgxs_rx_lane_map_xe45=0x1032 +xgxs_rx_lane_map_xe46=0x1032 +xgxs_rx_lane_map_xe47=0x1032 +xgxs_rx_lane_map_xe48=0x1032 + + +# RX - Config C. (FC 8/10) +# 0x3210 - port 16-19, 24-27 +xgxs_rx_lane_map_xe16=0x3210 +xgxs_rx_lane_map_xe17=0x3210 +xgxs_rx_lane_map_xe18=0x3210 +xgxs_rx_lane_map_xe19=0x3210 +xgxs_rx_lane_map_xe24=0x3210 +xgxs_rx_lane_map_xe25=0x3210 +xgxs_rx_lane_map_xe26=0x3210 +xgxs_rx_lane_map_xe27=0x3210 + + +# RX - Config D. (FC 12/13/17) +# 0x3210 - port 28-35, 40-43 +xgxs_rx_lane_map_xe28=0x3210 +xgxs_rx_lane_map_xe29=0x3210 +xgxs_rx_lane_map_xe30=0x3210 +xgxs_rx_lane_map_xe31=0x3210 +xgxs_rx_lane_map_xe32=0x3210 +xgxs_rx_lane_map_xe33=0x3210 +xgxs_rx_lane_map_xe34=0x3210 +xgxs_rx_lane_map_xe35=0x3210 +xgxs_rx_lane_map_xe41=0x3210 +xgxs_rx_lane_map_xe42=0x3210 +xgxs_rx_lane_map_xe43=0x3210 +xgxs_rx_lane_map_xe44=0x3210 + + +## Lane swapping for QSFP28 (100G) +## The HEX value is connection of red line within Falconcore in "Fig 3-4 SFP28 port connection" +# TX - Config A. (FC 21/25) +# 0x3210 - port ce0, ce3 +xgxs_tx_lane_map_ce0=0x3210 +xgxs_tx_lane_map_ce3=0x3210 + + +# TX - Config B. (FC 24) +# 0x3210 - port ce1 +xgxs_tx_lane_map_ce1=0x3210 + + +# TX - Config C. (FC 26) +# 0x3210 - port ce2 +xgxs_tx_lane_map_ce2=0x3210 + + +# TX - Config D. (FC 27) +# 0x3210 - ce5 +xgxs_tx_lane_map_ce5=0x3210 + + +# TX - Config E. (FC 29) +# 0x3210 - ce4 +xgxs_tx_lane_map_ce4=0x3210 + + +# RX - Config A. (FC 21/25) +# 0x1032 - port ce0, ce3 +xgxs_rx_lane_map_ce0=0x1032 +xgxs_rx_lane_map_ce3=0x1032 + + +# RX - Config B. (FC 24) +# 0x1032 - port ce1 +xgxs_rx_lane_map_ce1=0x1032 + + +# RX - Config C. (FC 26) +# 0x2301 - port ce2 +xgxs_rx_lane_map_ce2=0x2301 + + +# RX - Config D. (FC 27) +# 0x2301 - ce5 +xgxs_rx_lane_map_ce5=0x2301 + + +# TX - Config E. (FC 29) +# 0x3210 - ce4 +xgxs_rx_lane_map_ce4=0x3210 + +# EQ/iDriver + +# The first 16 ports, xe0-xe15 +serdes_preemphasis_1=0x2E380A +serdes_preemphasis_2=0x2E380A +serdes_preemphasis_3=0x2E380A +serdes_preemphasis_4=0x2E380A +serdes_preemphasis_5=0x2C3A0A +serdes_preemphasis_6=0x2C3A0A +serdes_preemphasis_7=0x2C3A0A +serdes_preemphasis_8=0x2C3A0A +serdes_preemphasis_9=0x323E00 +serdes_preemphasis_10=0x323E00 +serdes_preemphasis_11=0x304000 +serdes_preemphasis_12=0x304000 +serdes_preemphasis_13=0x2D4300 +serdes_preemphasis_14=0x304000 +serdes_preemphasis_15=0x2D4300 +serdes_preemphasis_16=0x2D4300 + +# The 2nd 20 ports, xe16-xe35 +serdes_preemphasis_34=0x2D4300 +serdes_preemphasis_35=0x2D4300 +serdes_preemphasis_36=0x2B4500 +serdes_preemphasis_37=0x2B4500 +serdes_preemphasis_38=0x2B4500 +serdes_preemphasis_39=0x2B4500 +serdes_preemphasis_40=0x2B4500 +serdes_preemphasis_41=0x2B4500 +serdes_preemphasis_42=0x2B4500 +serdes_preemphasis_43=0x2B4500 +serdes_preemphasis_44=0x284800 +serdes_preemphasis_45=0x284800 +serdes_preemphasis_46=0x284800 +serdes_preemphasis_47=0x284800 +serdes_preemphasis_48=0x284800 +serdes_preemphasis_49=0x284800 +serdes_preemphasis_50=0x2B4500 +serdes_preemphasis_51=0x2B4500 +serdes_preemphasis_52=0x284800 +serdes_preemphasis_53=0x284800 + +# The 3rd 12 ports, xe36-xe47 +serdes_preemphasis_68=0x284800 +serdes_preemphasis_69=0x2A4600 +serdes_preemphasis_70=0x2B4500 +serdes_preemphasis_71=0x2A4600 +serdes_preemphasis_72=0x2A4600 +serdes_preemphasis_73=0x2B4500 +serdes_preemphasis_74=0x2B4500 +serdes_preemphasis_75=0x2A4600 +serdes_preemphasis_76=0x2B4500 +serdes_preemphasis_77=0x2B4500 +serdes_preemphasis_78=0x2B4500 +serdes_preemphasis_79=0x2B4500 + +# 6 x 100G ports, expandable to 24 x 25G ports +serdes_preemphasis_80=0x2D4300 +serdes_preemphasis_81=0x2D4300 +serdes_preemphasis_82=0x2D4300 +serdes_preemphasis_83=0x2D4300 + +serdes_preemphasis_102=0x304000 +serdes_preemphasis_103=0x304000 +serdes_preemphasis_104=0x304000 +serdes_preemphasis_105=0x304000 + +serdes_preemphasis_106=0x304000 +serdes_preemphasis_107=0x304000 +serdes_preemphasis_108=0x304000 +serdes_preemphasis_109=0x304000 + +serdes_preemphasis_110=0x304000 +serdes_preemphasis_111=0x304000 +serdes_preemphasis_112=0x304000 +serdes_preemphasis_113=0x304000 + +serdes_preemphasis_114=0x2E360C +serdes_preemphasis_115=0x2E360C +serdes_preemphasis_116=0x2E360C +serdes_preemphasis_117=0x2E360C + +serdes_preemphasis_118=0x2E360C +serdes_preemphasis_119=0x2E360C +serdes_preemphasis_120=0x2E360C +serdes_preemphasis_121=0x2E360C diff --git a/platform/broadcom/sonic-platform-modules-inventec/common/utils/led_proc.py b/platform/broadcom/sonic-platform-modules-inventec/common/utils/led_proc.py new file mode 100755 index 000000000000..57c5dfc6035f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/common/utils/led_proc.py @@ -0,0 +1,314 @@ +#!/usr/bin/env python +# + +import os +import time +import syslog +import re +from sonic_sfp.bcmshell import bcmshell + +# ===================================================================== +# global variable init +# ===================================================================== + +# define data ram address +PORT_DATA_OFFSET_ADDR = 0xA0 +PORT_DATA_START_ADDR = 0xF2 +TOTAL_SCAN_BITS_ADDR = 0xF4 +SYNC_START_LEN_ADDR = 0xF6 +SYNC_STOP_LEN_ADDR = 0xF8 +# bit streaming rule for CPLD decode +TOTAL_SCAN_BITS = None +SYNC_S = None +SYNC_P = None +# define port data for bit streaming +BIT_LINK = None +BIT_FAULT = None +BIT_TX = None +BIT_RX = None +BIT_SPEED0 = None +BIT_SPEED1 = None +# define port speed +SPEED_100G = 100 +SPEED_40G = 40 +SPEED_25G = 25 +SPEED_10G = 10 +# the amount of LED processor +AMOUNT_LED_UP = None +# define board type +INV_REDWOOD = "SONiC-Inventec-d7032-100" +INV_CYPRESS = "SONiC-Inventec-d7054" +INV_SEQUOIA = "" +BOARD_TPYE = "" +EAGLE_CORE = [] + +PORT_LIST = [] + +# port status that is auto update by chip in data ram +# there are two byte to indicate each port status +''' +RX equ 0x0 ; received packet +TX equ 0x1 ; transmitted packet +COLL equ 0x2 ; collision indicator +SPEED_C equ 0x3 ; 100 Mbps +SPEED_M equ 0x4 ; 1000 Mbps +DUPLEX equ 0x5 ; half/full duplex +FLOW equ 0x6 ; flow control capable +LINKUP equ 0x7 ; link down/up status +LINKEN equ 0x8 ; link disabled/enabled status +ZERO equ 0xE ; always 0 +ONE equ 0xF ; always 1 +''' +STATUS_ENABLE = 1<<0 +STATUS_RX = 1<<0 +STATUS_TX = 1<<1 + +# object is to execute bcm shell command +BCM_SHELL = None + + + +# ===================================================================== +# class object +# ===================================================================== +class Led(): + + up = None + pfw = None + + def __init__(self, led_number, program_fw): + self.up = led_number + self.pfw = program_fw + + def led_start(self): + BCM_SHELL.cmd("led {0} start".format(self.up)) + syslog.syslog(syslog.LOG_INFO, "Start Led({0})".format(self.up)) + + def led_stop(self): + BCM_SHELL.cmd("led {0} stop".format(self.up)) + syslog.syslog(syslog.LOG_INFO, "Stop Led({0})".format(self.up)) + + def load_prog(self): + BCM_SHELL.cmd("led {0} prog {1}".format(self.up, self.pfw)) + syslog.syslog(syslog.LOG_INFO, "Load Led({0}) program firmware".format(self.up)) + + def write_port_data(self, addr, data): + BCM_SHELL.cmd("setreg CMIC_LEDUP{0}_DATA_RAM({1}) {2}".format(self.up, addr, data)) + #syslog.syslog(syslog.LOG_DEBUG, "Write Led({0}) data_ram({1}): {2}".format(self.up, addr, data)) + + def read_data_ram(self, offset): + return_string = BCM_SHELL.run("getreg CMIC_LEDUP{0}_DATA_RAM({1})".format(self.up, offset)) + for line in return_string.split("\n"): + re_obj = re.search(r"\.+)\>",line) + if re_obj is not None: + #syslog.syslog(syslog.LOG_DEBUG, "Read Led({0}) data_ram({1}): {2}".format(self.up, offset, re_obj.group("data"))) + return int(re_obj.group("data"), 16) + + return None + + +# ===================================================================== +# Function +# ===================================================================== +def _remap_registers(): + + fp = open('/usr/share/sonic/device/x86_64-inventec_d7032q28b-r0/led_proc_init.soc', "r") + content = fp.readlines() + fp.close() + err = False + + for line in content: + try: + BCM_SHELL.cmd(line.rstrip()) + except Exception, e: + err = True + syslog.syslog(syslog.LOG_ERR, "remap register abnormal: {0}".format(str(e))) + + if not err: + pass + #syslog.syslog(syslog.LOG_DEBUG, "remap Led registers successfully") + + + +def _update_port_list(): + + global PORT_LIST + PORT_LIST = [] + number = 0 + count = 0 + + content = BCM_SHELL.run("ps") + for line in content.split("\n"): + re_obj = re.search(r"(?P(xe|ce)\d+)\(\s*(?P\d+)\)\s+(?P(up|down|!ena)).+\s+(?P\d+)G",line) + if re_obj is not None: + if int(re_obj.group("bcm_id")) not in EAGLE_CORE: + PORT_LIST.append({"port_id":number, "name":re_obj.group("port_name"), "bcm_id":int(re_obj.group("bcm_id")), "link":re_obj.group("link"), "speed":int(re_obj.group("speed"))}) + number += 1 + + content = BCM_SHELL.run("led status") + for line in content.split("\n"): + re_obj = re.search(r"(?P\d+).+(?P\d)\:(?P\d+)",line) + if re_obj is not None: + if int(re_obj.group("bcm_id")) not in EAGLE_CORE: + PORT_LIST[count]["led_up"] = int(re_obj.group("led_up")) + PORT_LIST[count]["offset"] = int(re_obj.group("offset")) + count += 1 + + if number is not count: + PORT_LIST = [] + syslog.syslog(syslog.LOG_ERR, "The amount of port is not match") + else: + pass + #syslog.syslog(syslog.LOG_DEBUG, "update port list successfully") + + + +def _lookup_led_index(p): + + index = 0 + for port in PORT_LIST: + if p["bcm_id"] == port["bcm_id"]: + break + if p["led_up"] == port["led_up"]: + index += 1 + return index + PORT_DATA_OFFSET_ADDR + + + +def _led_init(): + + global BOARD_TPYE + global AMOUNT_LED_UP + global BIT_LINK + global BIT_FAULT + global BIT_TX + global BIT_RX + global BIT_SPEED0 + global BIT_SPEED1 + global EAGLE_CORE + global TOTAL_SCAN_BITS + global SYNC_S + global SYNC_P + + cmd = "uname -n" + platform = os.popen(cmd).read() + + if platform.rstrip() == INV_REDWOOD: + BOARD_TPYE = "inventec_d7032q28b" + AMOUNT_LED_UP = 2 + BIT_RX = 1<<0 #0x01 + BIT_TX = 1<<1 #0x02 + BIT_SPEED0 = 1<<3 #0x08 + BIT_SPEED1 = 1<<4 #0x10 + BIT_FAULT = 1<<6 #0x40 + BIT_LINK = 1<<7 #0x80 + TOTAL_SCAN_BITS = 32*1*4 + SYNC_S = 15 + SYNC_P = 3 + EAGLE_CORE = [66, 100] + _remap_registers() + + elif platform.rstrip() == INV_CYPRESS: + BOARD_TPYE = "inventec_d7054q28b" + AMOUNT_LED_UP = 2 + BIT_LINK = 1<<0 #0x01 + BIT_FAULT = 1<<1 #0x02 + BIT_SPEED0 = 1<<2 #0x04 + EAGLE_CORE = [66, 100] + + elif platform.rstrip() == INV_SEQUOIA: + BOARD_TPYE = "inventec_d7264q28b" + AMOUNT_LED_UP = 4 + + else: + BOARD_TPYE = "not found" + + syslog.syslog(syslog.LOG_INFO, "Device: {0}".format(BOARD_TPYE)) + #syslog.syslog(syslog.LOG_DEBUG, "led_amount: {0}".format(AMOUNT_LED_UP)) + + + +if __name__ == "__main__": + + waitSyncd = True + retryCount = 0 + syslog.openlog("led_proc", syslog.LOG_PID, facility=syslog.LOG_DAEMON) + + while waitSyncd: + try: + BCM_SHELL = bcmshell() + waitSyncd = False + except Exception, e: + syslog.syslog(syslog.LOG_WARNING, "{0}, Retry times({1})".format(str(e),retryCount)) + retryCount += 1 + time.sleep(5) + + + _led_init() + led_obj = [] + for idx in range(AMOUNT_LED_UP): + led_obj.append(Led(idx, "")) + #syslog.syslog(syslog.LOG_DEBUG, "create object led({0}) successfully".format(idx)) + + if BOARD_TPYE == "inventec_d7032q28b": + led_obj[idx].write_port_data(PORT_DATA_START_ADDR, PORT_DATA_OFFSET_ADDR) + led_obj[idx].write_port_data(TOTAL_SCAN_BITS_ADDR, TOTAL_SCAN_BITS) + led_obj[idx].write_port_data(SYNC_START_LEN_ADDR, SYNC_S) + led_obj[idx].write_port_data(SYNC_STOP_LEN_ADDR, SYNC_P) + + + reset_sec = 2 + count_down = 0 + queue_active = [] + port_data = None + while True: + if count_down == 0: + queue_active = [] + _update_port_list() + for port in PORT_LIST: + if port["link"] == "up": + queue_active.append(port) + else: + port_data = 0 + # redwood bit streaming for CPLD decode is only use led up0 + led_obj[0].write_port_data(PORT_DATA_OFFSET_ADDR + port["port_id"], port_data) + count_down = reset_sec + else: + for port in queue_active: + port_data = 0 + + if BOARD_TPYE == "inventec_d7032q28b": + port_data |= BIT_LINK + addr = 2*(port["offset"]-1) + byte1 = led_obj[port["led_up"]].read_data_ram(addr) + byte2 = led_obj[port["led_up"]].read_data_ram(addr+1) + if byte1&STATUS_RX: + port_data |= BIT_RX + if byte1&STATUS_TX: + port_data |= BIT_TX + if port["speed"] == SPEED_100G: + port_data |= BIT_SPEED0 + port_data |= BIT_SPEED1 + elif port["speed"] == SPEED_40G: + port_data |= BIT_SPEED1 + elif port["speed"] == SPEED_25G: + port_data |= BIT_SPEED0 + else: + pass + + # redwood bit streaming for CPLD decode is only use led up0 + led_obj[0].write_port_data(PORT_DATA_OFFSET_ADDR + port["port_id"], port_data) + continue + + elif BOARD_TPYE == "inventec_d7054q28b": + if port["speed"] != SPEED_100G and port["speed"] != SPEED_25G: + port_data |= BIT_SPEED0 + + led_index = _lookup_led_index(port) + led_obj[port["led_up"]].write_port_data(led_index, port_data) + + time.sleep(0.5) + count_down -= 1 + + syslog.closelog() + diff --git a/platform/broadcom/sonic-platform-modules-inventec/common/utils/transceiver_monitor.py b/platform/broadcom/sonic-platform-modules-inventec/common/utils/transceiver_monitor.py new file mode 100755 index 000000000000..6546a4e44ca0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/common/utils/transceiver_monitor.py @@ -0,0 +1,305 @@ +#!/usr/bin/env python +# + +""" +Usage: %(scriptName)s [options] command object + +Auto detecting the transceiver and set the correct if_type value + +options: + -h | --help : this help message + -d | --debug : run with debug mode + +""" + +try: + import os + import commands + import sys, getopt + import logging + import re + import time + import datetime + import syslog + from sfputil import SfpUtil + from sonic_sfp.bcmshell import bcmshell + +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + +DEBUG = False +args = [] +INV_REDWOOD_PLATFORM = "SONiC-Inventec-d7032-100" +INV_CYPRESS_PLATFORM = "SONiC-Inventec-d7054" +INV_SEQUOIA_PLATFORM = "SONiC-Inventec-d7264" + +transceiver_type_dict = { + "FCBG110SD1C03": "SR", + "FCBG110SD1C05": "SR", + "FTLX8571D3BCL": "SR", + "FTLX8574D3BCL": "SR", + "AFBR-709DMZ": "SR", + "AFBR-709SMZ": "SR", + "FTLX8571D3BCV": "SR", + "FTLX1471D3BCL": "SR", + "FTLX1871M3BCL": "SR", + "FTLF8536P4BCL": "SR", + "FCBG125SD1C05": "SR", + "FCBG125SD1C30": "SR", + "FCBG125SD1C03": "SR", + "FCBG410QB1C03-1E": "SR4", + "FCBG4100QB1C030-1E": "SR4", + "885350163": "SR4", + "88535017": "SR4", + "FTL410QE2C": "SR4", + "FTL410QD3C": "SR4", + "FTL410QD2C": "SR4", + "AFBR-79E3PZ": "SR4", + "AFBR-79Q4Z": "SR4", + "FTL4C1QE1C": "SR4", + "FTLC9551REPM": "SR4", + "FTLC1151RDPL": "SR4", + "DAC-010SS-X50" : "KR", + "DAC-010QQ-X50": "KR4", + "DAC-040QS-007": "KR4", + "DAC-040QQ-007": "KR4", + "DAC-040QQ-005": "KR4", + "DAC-040QS-005": "KR4", + "NDAAFF-0001": "KR4", + "L0HQF001-SD-R": "KR4", + "DAC-Q28/Q28-28-01": "KR4", + "NDAAFF-0003": "KR4", + "NDAQGF0001": "KR4", + "L0HQF003-SD-R": "KR4", + "NDAQGJ-0003": "KR4", + "L0HQF004-SD-R": "KR4", + "L0HSF006-SD-R": "KR", + "L0HSF007-SD-R": "KR", + "L0HSF008-SD-R": "KR", + "L0HQF009-SD-R": "KR4" + } + +initial_command = [] + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def log_message( string ): + syslog.openlog("transceiver_monitor", syslog.LOG_PID, facility=syslog.LOG_DAEMON) + syslog.syslog(syslog.LOG_NOTICE, string) + +class BCMUtil(bcmshell): + + port_to_bcm_mapping = dict() + sal_config_list = dict() + eagle_list = [] + platform = None + + def get_platform(self): + if self.platform is None: + self.platform = os.popen("uname -n").read().strip() + return self.platform + + def get_port_to_bcm_mapping(self): + if self.port_to_bcm_mapping is None: + return dict() + else: + return self.port_to_bcm_mapping + + def show_port_to_bcm_mapping(self): + print self.port_to_bcm_mapping + + def get_eagle_port(self): + return self.eagle_list + + def parsing_eagle_port(self): + name = self.get_platform() + if name is not None: + if name == INV_REDWOOD_PLATFORM: + self.eagle_list = [66,100] + elif name == INV_CYPRESS_PLATFORM: + self.eagle_list = [66,100] + elif name == INV_SEQUOIA_PLATFORM: + self.eagle_list = [66,100] + else: + self.eagle_list = [] + + def get_sal_config_list(self): + return self.sal_config_list + + def show_sal_config_list(self): + print self.sal_config_list + + def initial_sal_config_list( self ): + content = self.run("config") + for line in content.split("\n"): + ConfigObject = re.search(r"portmap\_(?P\d+)\=(?P\d+)\:\d+",line) + if ConfigObject is not None: + if int(ConfigObject.group("bcm_id")) not in self.get_eagle_port(): + self.get_sal_config_list()[int(ConfigObject.group("bcm_id"))]={"lane": int(ConfigObject.group("lane_id")), "speed": None, "portname": None} + + def parsing_port_list(self): + content = self.run("ps") + count = 0 + for line in content.split("\n"): + PSObject = re.search(r"(?P(xe|ce)\d+)\(\s*(?P\d+)\).+\s+(?P\d+)G",line) + if PSObject is not None: + if int(PSObject.group("bcm_id")) not in self.get_eagle_port(): + if self.get_sal_config_list().has_key(int(PSObject.group("bcm_id"))): + self.get_sal_config_list()[int(PSObject.group("bcm_id"))]["portname"] = PSObject.group("port_name") + self.get_sal_config_list()[int(PSObject.group("bcm_id"))]["speed"] = int(PSObject.group("speed"))*1000 + self.port_to_bcm_mapping[count] = int(PSObject.group("bcm_id")) + count = count +1 + + + def execute_command(self, cmd): + self.cmd(cmd) + +class TransceiverUtil(SfpUtil): + + transceiver_port_mapping = dict() + + def get_transceiver_port_mapping(self): + return self.transceiver_port_mapping + + def show_transceiver_port_mapping(self): + print self.transceiver_port_mapping + + def get_bcm_port_name(self, index): + if self.transceiver_port_mapping.has_key(index) and bcm_obj.get_sal_config_list().has_key(self.transceiver_port_mapping[index]["bcm"]): + return bcm_obj.get_sal_config_list()[self.transceiver_port_mapping[index]["bcm"]]["portname"] + else: + return "" + + def get_port_to_i2c_mapping(self): + if self.port_to_i2c_mapping is None: + return dict() + else: + return self.port_to_i2c_mapping + + def show_port_to_i2c_mapping(self): + print self.port_to_i2c_mapping + + def get_eeprom_partNum(self, portNum): + tempdict = dict() + tempdict = self.get_eeprom_dict(portNum) + self.get_eeprom_partNum_from_parser_eeprom_dict(tempdict) + + def get_eeprom_dict_info(self, portNum): + return self.get_eeprom_dict(portNum) + + def get_eeprom_partNum_from_parser_eeprom_dict(self, tempdict ): + if tempdict is not None: + if tempdict["interface"]["data"].has_key("VendorPN"): + return tempdict["interface"]["data"]["VendorPN"] + elif tempdict["interface"]["data"].has_key("Vendor PN"): + return tempdict["interface"]["data"]["Vendor PN"] + else: + return None + else: + return None + + def get_transceiver_type(self, pn ): + if pn is not None: + if transceiver_type_dict.has_key(pn.upper()): + return transceiver_type_dict[pn.upper()] + else: + return None + + def set_transceiver_type( self, portNum, pn ): + type = self.get_transceiver_type( pn ) + if type is not None: + if bcm_obj.get_platform() == INV_SEQUOIA_PLATFORM: + speed = bcm_obj.get_sal_config_list()[self.transceiver_port_mapping[portNum]["bcm"]]["speed"] + bcm_obj.execute_command( "port %s if=%s speed=%d" % ( self.get_bcm_port_name(portNum), type, speed ) ) + else: + bcm_obj.execute_command( "port %s if=%s" % ( self.get_bcm_port_name(portNum), type ) ) + #print "Detecting port {0} need to change interface type {1} ({2})".format(self.get_bcm_port_name(portNum), type, self.get_transceiver_port_mapping()[portNum]["pn"]) + log_message("Detecting port {0} need to change interface type {1} ({2})".format(self.get_bcm_port_name(portNum), type, self.get_transceiver_port_mapping()[portNum]["pn"]) ) + + def initial_transceiver_port_mapping(self): + for index in self.get_port_to_i2c_mapping().keys(): + if self.transceiver_port_mapping.has_key(index) is False : + i2cValue = self.get_port_to_i2c_mapping()[index] + bcmValue = bcm_obj.get_port_to_bcm_mapping()[index] + self.transceiver_port_mapping[index]={"i2c": i2cValue, "bcm": bcmValue , "pn": None} + + def set_power_mode_for_QSFP(self): + for index in self.get_port_to_i2c_mapping().keys(): + if index >= self.qsfp_port_start and index <= self.qsfp_port_end : + self.set_low_power_mode(index, False) + +def main(): + try: + global DEBUG + global transceiver_obj + global bcm_obj + + initalNotOK = True + retestCount = 0 + while initalNotOK : + try: + transceiver_obj = TransceiverUtil() + bcm_obj = BCMUtil() + initalNotOK = False + except Exception, e: + log_message("Exception. The warning is {0}, Retry again ({1})".format(str(e),retestCount) ) + retestCount = retestCount + 1 + time.sleep(5) + + log_message( "Object initialed successfully" ) + + options, args = getopt.getopt(sys.argv[1:], 'hd', ['help', + 'debug' + ]) + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + else: + logging.info("no option") + + # Before loop, You could execute specific command to initial chip + for cmd_index in initial_command : + bcm_obj.execute_command(cmd_index) + + # Initial the sal config list + bcm_obj.parsing_eagle_port() + bcm_obj.initial_sal_config_list() + bcm_obj.parsing_port_list() + # bcm_obj.show_port_to_bcm_mapping() + # bcm_obj.show_sal_config_list() + + # Initial the transceiver_obj + transceiver_obj.initial_transceiver_port_mapping() + # transceiver_obj.show_transceiver_port_mapping() + + transceiver_obj.set_power_mode_for_QSFP() + + while 1 : + if bcm_obj.get_platform() == INV_SEQUOIA_PLATFORM: + bcm_obj.parsing_port_list() + for index in transceiver_obj.get_port_to_i2c_mapping().keys(): + info = transceiver_obj.get_eeprom_dict_info(index) + value = transceiver_obj.get_eeprom_partNum_from_parser_eeprom_dict(info) + if transceiver_obj.get_transceiver_port_mapping().has_key(index) is not False and transceiver_obj.get_transceiver_port_mapping()[index]["pn"] <> value: + transceiver_obj.get_transceiver_port_mapping()[index]["pn"] = value + transceiver_obj.set_transceiver_type(index,value) + #transceiver_obj.show_transceiver_port_mapping() + time.sleep(1) + + except (Exception, KeyboardInterrupt) as e: + log_message("Terminating this python daemon ({0})".format(e)) + syslog.closelog() + del transceiver_obj + del bcm_obj + +if __name__ == "__main__": + main() + + + + diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.init b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.init index 5df1bb444123..97fee8c3ad57 100644 --- a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.init +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.init @@ -11,18 +11,40 @@ # Short-Description: Setup Inventec d7032q28b board. ### END INIT INFO +DIR=/usr/share/sonic/device/x86_64-inventec_d7032q28b-r0/plugins +MONITOR_DAEMON=$DIR/transceiver_monitor.py +MONITOR_DAEMON_NAME=transceiver_monitor +LED_DAEMON=$DIR/led_proc.py +LED_DAEMON_NAME=led_proc + +# The process ID of the script when it runs is stored here: +MONITOR_PIDFILE=/var/run/$MONITOR_DAEMON_NAME.pid +LED_PIDFILE=/var/run/$LED_DAEMON_NAME.pid + +do_monitor_start() { + /sbin/start-stop-daemon --quiet --oknodo --pidfile $LED_PIDFILE --make-pidfile --startas $LED_DAEMON --start --background -- $DAEMON_OPTS + /sbin/start-stop-daemon --quiet --oknodo --pidfile $MONITOR_PIDFILE --make-pidfile --startas $MONITOR_DAEMON --start --background -- $DAEMON_OPTS +} + +do_monitor_stop() { + /sbin/start-stop-daemon --quiet --oknodo --stop --pidfile $MONITOR_PIDFILE --retry 10 + /sbin/start-stop-daemon --quiet --oknodo --stop --pidfile $LED_PIDFILE --retry 10 +} + case "$1" in start) echo -n "Setting up board... " depmod -a /usr/local/bin/inventec_d7032_util.py -f install + do_monitor_${1} echo "done." ;; stop) /usr/local/bin/inventec_d7032_util.py -f clean + do_monitor_${1} echo "done." ;; diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.install b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.install index 0864a728ea79..c716a9d0d8b7 100644 --- a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.install +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.install @@ -1 +1,3 @@ d7032q28b/utils/inventec_d7032_util.py usr/local/bin +common/utils/transceiver_monitor.py usr/share/sonic/device/x86_64-inventec_d7032q28b-r0/plugins +common/utils/led_proc.py usr/share/sonic/device/x86_64-inventec_d7032q28b-r0/plugins diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.upstart b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.upstart deleted file mode 100644 index cbb96a664f6a..000000000000 --- a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7032q28b.upstart +++ /dev/null @@ -1,5 +0,0 @@ -description "SONiC platform service" - -respawn - -exec /usr/local/bin/inventec_d7032_util.py -f install diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.init b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.init index 20341f8527e5..a6e3e88f20d4 100644 --- a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.init +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.init @@ -11,18 +11,40 @@ # Short-Description: Setup Inventec d7054q28b board. ### END INIT INFO +DIR=/usr/share/sonic/device/x86_64-inventec_d7054q28b-r0/plugins +MONITOR_DAEMON=$DIR/transceiver_monitor.py +MONITOR_DAEMON_NAME=transceiver_monitor +LED_DAEMON=$DIR/led_proc.py +LED_DAEMON_NAME=led_proc + +# The process ID of the script when it runs is stored here: +MONITOR_PIDFILE=/var/run/$MONITOR_DAEMON_NAME.pid +LED_PIDFILE=/var/run/$LED_DAEMON_NAME.pid + +do_monitor_start() { + /sbin/start-stop-daemon --quiet --oknodo --pidfile $LED_PIDFILE --make-pidfile --startas $LED_DAEMON --start --background -- $DAEMON_OPTS + /sbin/start-stop-daemon --quiet --oknodo --pidfile $MONITOR_PIDFILE --make-pidfile --startas $MONITOR_DAEMON --start --background -- $DAEMON_OPTS +} + +do_monitor_stop() { + /sbin/start-stop-daemon --quiet --oknodo --stop --pidfile $MONITOR_PIDFILE --retry 10 + /sbin/start-stop-daemon --quiet --oknodo --stop --pidfile $LED_PIDFILE --retry 10 +} + case "$1" in start) echo -n "Setting up board... " depmod -a /usr/local/bin/inventec_d7054_util.py -f install + do_monitor_${1} echo "done." ;; stop) /usr/local/bin/inventec_d7054_util.py -f clean + do_monitor_${1} echo "done." ;; diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.install b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.install index 42bf3f23c809..699a5ef41417 100644 --- a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.install +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.install @@ -1 +1,4 @@ d7054q28b/utils/inventec_d7054_util.py usr/local/bin +common/utils/transceiver_monitor.py usr/share/sonic/device/x86_64-inventec_d7054q28b-r0/plugins +common/utils/led_proc.py usr/share/sonic/device/x86_64-inventec_d7054q28b-r0/plugins + diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.upstart b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.upstart deleted file mode 100644 index 9f185f47b623..000000000000 --- a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7054q28b.upstart +++ /dev/null @@ -1,5 +0,0 @@ -description "SONiC platform service" - -respawn - -exec /usr/local/bin/inventec_d7054_util.py -f install From eefd3f4ddb8bbfbb345b4bd3cfcedf433a283634 Mon Sep 17 00:00:00 2001 From: yangbashuang <37615000+yangbashuang@users.noreply.github.com> Date: Mon, 13 Aug 2018 08:22:08 +0800 Subject: [PATCH 133/180] [platform]: update centec platform drivers and sai (#1702) --- .../E582-48x6q/buffers.json.j2 | 70 + .../E582-48x6q/pg_profile_lookup.ini | 21 + .../E582-48x6q/port_config.ini | 86 +- .../E582-48x6q/qos.json | 133 ++ .../E582-48x6q/sai.profile | 2 + .../x86_64-centec_e582_48x6q-r0/fancontrol | 11 + .../installer.conf | 1 + .../x86_64-centec_e582_48x6q-r0/minigraph.xml | 1049 ---------- .../plugins/eeprom.py | 31 + .../plugins/led_control.py | 153 ++ .../plugins/psuutil.py | 74 + .../plugins/sfputil.py | 160 ++ dockers/docker-orchagent/orchagent.sh | 5 + platform/centec/one-image.mk | 2 +- .../centec/platform-modules-centec-e582.mk | 19 + platform/centec/rules.mk | 2 +- platform/centec/sai.mk | 5 - platform/centec/sdk.mk | 7 +- .../48x2q4z/cfg/48x2q4z-modules.conf | 17 + .../48x2q4z/modules/Makefile | 2 + .../48x2q4z/modules/centec_at24c64.c | 657 ++++++ .../modules/centec_e582_48x2q4z_platform.c | 142 ++ .../48x2q4z/modules/dal_kernel.c | 1814 ++++++++++++++++ .../48x2q4z/modules/dal_kernel.h | 170 ++ .../48x2q4z/modules/dal_mpool.c | 343 ++++ .../48x2q4z/modules/dal_mpool.h | 71 + .../48x2q4z/scripts/48x2q4z_platform.sh | 36 + .../48x6q/cfg/48x6q-modules.conf | 14 + .../48x6q/cfg/config_db.json | 303 +++ .../48x6q/cfg/config_db_l2l3.json | 610 ++++++ .../48x6q/cfg/minigraph.xml | 38 + .../48x6q/modules/Makefile | 2 + .../48x6q/modules/centec_at24c64.c | 658 ++++++ .../modules/centec_e582_48x6q_platform.c | 1380 +++++++++++++ .../48x6q/modules/dal_kernel.c | 1822 +++++++++++++++++ .../48x6q/modules/dal_kernel.h | 170 ++ .../48x6q/modules/dal_mpool.c | 343 ++++ .../48x6q/modules/dal_mpool.h | 71 + .../48x6q/scripts/48x6q_platform.sh | 62 + .../48x6q/scripts/48x6q_platform_monitor.py | 217 ++ .../sonic-platform-modules-e582/LICENSE | 15 + .../sonic-platform-modules-e582/README.md | 1 + .../debian/changelog | 11 + .../sonic-platform-modules-e582/debian/compat | 1 + .../debian/control | 17 + .../debian/platform-modules-e582-48x2q4z.init | 38 + .../platform-modules-e582-48x2q4z.install | 2 + .../debian/platform-modules-e582-48x6q.init | 38 + .../platform-modules-e582-48x6q.install | 6 + .../sonic-platform-modules-e582/debian/rules | 35 + 50 files changed, 9846 insertions(+), 1091 deletions(-) create mode 100644 device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/buffers.json.j2 create mode 100644 device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/pg_profile_lookup.ini create mode 100644 device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/qos.json create mode 100644 device/centec/x86_64-centec_e582_48x6q-r0/fancontrol delete mode 100644 device/centec/x86_64-centec_e582_48x6q-r0/minigraph.xml create mode 100644 device/centec/x86_64-centec_e582_48x6q-r0/plugins/eeprom.py create mode 100644 device/centec/x86_64-centec_e582_48x6q-r0/plugins/led_control.py create mode 100644 device/centec/x86_64-centec_e582_48x6q-r0/plugins/psuutil.py create mode 100644 device/centec/x86_64-centec_e582_48x6q-r0/plugins/sfputil.py create mode 100644 platform/centec/platform-modules-centec-e582.mk delete mode 100644 platform/centec/sai.mk create mode 100644 platform/centec/sonic-platform-modules-e582/48x2q4z/cfg/48x2q4z-modules.conf create mode 100644 platform/centec/sonic-platform-modules-e582/48x2q4z/modules/Makefile create mode 100644 platform/centec/sonic-platform-modules-e582/48x2q4z/modules/centec_at24c64.c create mode 100644 platform/centec/sonic-platform-modules-e582/48x2q4z/modules/centec_e582_48x2q4z_platform.c create mode 100644 platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_kernel.c create mode 100644 platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_kernel.h create mode 100644 platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_mpool.c create mode 100644 platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_mpool.h create mode 100755 platform/centec/sonic-platform-modules-e582/48x2q4z/scripts/48x2q4z_platform.sh create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/cfg/48x6q-modules.conf create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/cfg/config_db.json create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/cfg/config_db_l2l3.json create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/cfg/minigraph.xml create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/modules/Makefile create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/modules/centec_at24c64.c create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/modules/centec_e582_48x6q_platform.c create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_kernel.c create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_kernel.h create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_mpool.c create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_mpool.h create mode 100755 platform/centec/sonic-platform-modules-e582/48x6q/scripts/48x6q_platform.sh create mode 100644 platform/centec/sonic-platform-modules-e582/48x6q/scripts/48x6q_platform_monitor.py create mode 100644 platform/centec/sonic-platform-modules-e582/LICENSE create mode 100644 platform/centec/sonic-platform-modules-e582/README.md create mode 100644 platform/centec/sonic-platform-modules-e582/debian/changelog create mode 100644 platform/centec/sonic-platform-modules-e582/debian/compat create mode 100644 platform/centec/sonic-platform-modules-e582/debian/control create mode 100755 platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x2q4z.init create mode 100644 platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x2q4z.install create mode 100755 platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x6q.init create mode 100644 platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x6q.install create mode 100755 platform/centec/sonic-platform-modules-e582/debian/rules diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/buffers.json.j2 b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/buffers.json.j2 new file mode 100644 index 000000000000..08e21e428b6c --- /dev/null +++ b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/buffers.json.j2 @@ -0,0 +1,70 @@ +{# Default values which will be used if no actual configura available #} +{% set default_cable = '40m' %} +{% set default_ports_num = 54 -%} + +{# Port configuration to cable length look-up table #} +{# Each record describes mapping of DUT (DUT port) role and neighbor role to cable length #} +{# Roles described in the minigraph #} +{% set ports2cable = { + 'torrouter_server' : '5m', + 'leafrouter_torrouter' : '40m', + 'spinerouter_leafrouter' : '300m' + } +%} + +{%- macro cable_length(port_name) -%} + {%- set cable_len = [] -%} + {%- for local_port in DEVICE_NEIGHBOR -%} + {%- if local_port == port_name -%} + {%- if DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] -%} + {%- set neighbor = DEVICE_NEIGHBOR_METADATA[DEVICE_NEIGHBOR[local_port].name] -%} + {%- set neighbor_role = neighbor.type -%} + {%- set roles1 = switch_role + '_' + neighbor_role %} + {%- set roles2 = neighbor_role + '_' + switch_role -%} + {%- set roles1 = roles1 | lower -%} + {%- set roles2 = roles2 | lower -%} + {%- if roles1 in ports2cable -%} + {%- if cable_len.append(ports2cable[roles1]) -%}{%- endif -%} + {%- elif roles2 in ports2cable -%} + {%- if cable_len.append(ports2cable[roles2]) -%}{%- endif -%} + {%- endif -%} + {%- endif -%} + {%- endif -%} + {%- endfor -%} + {%- if cable_len -%} + {{ cable_len.0 }} + {%- else -%} + {{ default_cable }} + {%- endif -%} +{% endmacro %} + +{%- if DEVICE_METADATA is defined %} +{%- set switch_role = DEVICE_METADATA['localhost']['type'] %} +{%- endif -%} + +{# Generate list of ports if not defined #} +{% if PORT is not defined %} + {% set PORT = [] %} + {% for port_idx in range(1,default_ports_num+1) %} + {% if PORT.append("Ethernet%d" % (port_idx)) %}{% endif %} + {% endfor %} +{% endif -%} + +{% set port_names_list = [] %} +{% for port in PORT %} + {%- if port_names_list.append(port) %}{% endif %} +{% endfor %} +{% set port_names = port_names_list | join(',') -%} + +{ + "CABLE_LENGTH": { + "AZURE": { + {% for port in PORT %} + {% set cable = cable_length(port) -%} + "{{ port }}": "{{ cable }}"{%- if not loop.last -%},{% endif %} + + {% endfor %} + } + } +} + diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/pg_profile_lookup.ini b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/pg_profile_lookup.ini new file mode 100644 index 000000000000..a65244e69b5b --- /dev/null +++ b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/pg_profile_lookup.ini @@ -0,0 +1,21 @@ +# PG lossless profiles. +# speed cable size xon xoff threshold + 1000 5m 34816 18432 16384 0 + 10000 5m 34816 18432 16384 0 + 25000 5m 34816 18432 16384 0 + 40000 5m 34816 18432 16384 0 + 50000 5m 34816 18432 16384 0 + 100000 5m 36864 18432 18432 0 + 1000 40m 36864 18432 18432 0 + 10000 40m 36864 18432 18432 0 + 25000 40m 39936 18432 21504 0 + 40000 40m 41984 18432 23552 0 + 50000 40m 41984 18432 23552 0 + 100000 40m 54272 18432 35840 0 + 1000 300m 49152 18432 30720 0 + 10000 300m 49152 18432 30720 0 + 25000 300m 71680 18432 53248 0 + 40000 300m 94208 18432 75776 0 + 50000 300m 94208 18432 75776 0 + 100000 300m 184320 18432 165888 0 + diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/port_config.ini b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/port_config.ini index b9a831f22e8d..95190282b25d 100644 --- a/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/port_config.ini +++ b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/port_config.ini @@ -1,33 +1,55 @@ # name lanes -Ethernet0 1 -Ethernet4 2 -Ethernet8 3 -Ethernet12 4 -Ethernet16 5 -Ethernet20 6 -Ethernet24 7 -Ethernet28 8 -Ethernet32 9 -Ethernet36 10 -Ethernet40 11 -Ethernet44 12 -Ethernet48 13 -Ethernet52 14 -Ethernet56 15 -Ethernet60 16 -Ethernet64 17 -Ethernet68 18 -Ethernet72 19 -Ethernet76 20 -Ethernet80 21 -Ethernet84 22 -Ethernet88 23 -Ethernet92 24 -Ethernet96 25 -Ethernet100 26 -Ethernet104 27 -Ethernet108 28 -Ethernet112 29 -Ethernet116 30 -Ethernet120 31 -Ethernet124 32 +Ethernet1 4 +Ethernet2 5 +Ethernet3 6 +Ethernet4 8 +Ethernet5 9 +Ethernet6 10 +Ethernet7 12 +Ethernet8 13 +Ethernet9 14 +Ethernet10 16 +Ethernet11 17 +Ethernet12 18 +Ethernet13 20 +Ethernet14 21 +Ethernet15 22 +Ethernet16 24 +Ethernet17 25 +Ethernet18 26 +Ethernet19 28 +Ethernet20 30 +Ethernet21 31 +Ethernet22 32 +Ethernet23 34 +Ethernet24 35 +Ethernet25 40 +Ethernet26 41 +Ethernet27 43 +Ethernet28 36 +Ethernet29 37 +Ethernet30 39 +Ethernet31 44 +Ethernet32 45 +Ethernet33 46 +Ethernet34 47 +Ethernet35 80 +Ethernet36 81 +Ethernet37 82 +Ethernet38 88 +Ethernet39 89 +Ethernet40 90 +Ethernet41 84 +Ethernet42 85 +Ethernet43 86 +Ethernet44 87 +Ethernet45 92 +Ethernet46 93 +Ethernet47 94 +Ethernet48 95 +Ethernet49 52,53,54,55 +Ethernet50 56,57,58,59 +Ethernet51 60,61,62,63 +Ethernet52 68,69,70,71 +Ethernet53 72,73,74,75 +Ethernet54 76,77,78,79 diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/qos.json b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/qos.json new file mode 100644 index 000000000000..b9dc80abb07f --- /dev/null +++ b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/qos.json @@ -0,0 +1,133 @@ +{ + "DSCP_TO_TC_MAP": { + "AZURE": { + "0":"0", + "1":"0", + "2":"0", + "3":"0", + "4":"0", + "5":"0", + "6":"0", + "7":"0", + "8":"1", + "9":"1", + "10":"1", + "11":"1", + "12":"1", + "13":"1", + "14":"1", + "15":"1", + "16":"2", + "17":"2", + "18":"2", + "19":"2", + "20":"2", + "21":"2", + "22":"2", + "23":"2", + "24":"3", + "25":"3", + "26":"3", + "27":"3", + "28":"3", + "29":"3", + "30":"3", + "31":"3", + "32":"4", + "33":"4", + "34":"4", + "35":"4", + "36":"4", + "37":"4", + "38":"4", + "39":"4", + "40":"5", + "41":"5", + "42":"5", + "43":"5", + "44":"5", + "45":"5", + "46":"5", + "47":"5", + "48":"6", + "49":"6", + "50":"6", + "51":"6", + "52":"6", + "53":"6", + "54":"6", + "55":"6", + "56":"7", + "57":"7", + "58":"7", + "59":"7", + "60":"7", + "61":"7", + "62":"7", + "63":"7" + } + }, + "SCHEDULER": { + "scheduler.0": { + "type":"DWRR", + "weight": "25" + }, + "scheduler.1": { + "type":"DWRR", + "weight": "30" + }, + "scheduler.2": { + "type":"DWRR", + "weight": "20" + } + }, + "PORT_QOS_MAP": { + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54": { + "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", + "pfc_enable": "3,4" + } + }, + "WRED_PROFILE": { + "AZURE_LOSSY": { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "red_max_threshold":"32760", + "red_min_threshold":"4095", + "yellow_max_threshold":"32760", + "yellow_min_threshold":"4095", + "green_max_threshold": "32760", + "green_min_threshold": "4095" + }, + "AZURE_LOSSLESS": { + "wred_green_enable":"true", + "wred_yellow_enable":"true", + "red_max_threshold":"32760", + "red_min_threshold":"4095", + "yellow_max_threshold":"32760", + "yellow_min_threshold":"4095", + "green_max_threshold": "32760", + "green_min_threshold": "4095" + } + }, + "QUEUE": { + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54|0-2": { + "scheduler" : "[SCHEDULER|scheduler.1]" + }, + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54|5-7": { + "scheduler" : "[SCHEDULER|scheduler.2]" + }, + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54|0-2": { + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" + }, + + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54|5-7": { + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" + }, + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54|3-4": { + "scheduler" : "[SCHEDULER|scheduler.0]", + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + } + } +} + + diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/sai.profile b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/sai.profile index 2eb3ce5f612b..9842dcf57fac 100644 --- a/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/sai.profile +++ b/device/centec/x86_64-centec_e582_48x6q-r0/E582-48x6q/sai.profile @@ -1 +1,3 @@ BOARD_CONFIG_FILE_PATH=/etc/centec/E582-48x6q.json +SAI_INIT_CONFIG_FILE=/etc/centec/E582-48x6q-chip-profile.txt +SAI_HW_PORT_PROFILE_ID_CONFIG_FILE=/etc/centec/E582-48x6q-datapath-cfg.txt diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/fancontrol b/device/centec/x86_64-centec_e582_48x6q-r0/fancontrol new file mode 100644 index 000000000000..886a4bc6c030 --- /dev/null +++ b/device/centec/x86_64-centec_e582_48x6q-r0/fancontrol @@ -0,0 +1,11 @@ +# Configuration file generated by pwmconfig, changes will be lost +INTERVAL=10 +DEVPATH=hwmon0= hwmon5=devices/pci0000:00/0000:00:1f.3/i2c-0/i2c-15/15-002f +DEVNAME=hwmon0=acpitz hwmon5=adt7470 +FCTEMPS=hwmon5/device/pwm4=hwmon0/temp1_input hwmon5/device/pwm3=hwmon0/temp1_input hwmon5/device/pwm2=hwmon0/temp1_input hwmon5/device/pwm1=hwmon0/temp1_input +FCFANS=hwmon5/device/pwm4=hwmon5/device/fan4_input hwmon5/device/pwm3=hwmon5/device/fan3_input hwmon5/device/pwm2=hwmon5/device/fan2_input hwmon5/device/pwm1=hwmon5/device/fan1_input +MINTEMP=hwmon5/device/pwm4=20 hwmon5/device/pwm3=20 hwmon5/device/pwm2=20 hwmon5/device/pwm1=20 +MAXTEMP=hwmon5/device/pwm4=60 hwmon5/device/pwm3=60 hwmon5/device/pwm2=60 hwmon5/device/pwm1=60 +MINSTART=hwmon5/device/pwm4=150 hwmon5/device/pwm3=12 hwmon5/device/pwm2=12 hwmon5/device/pwm1=150 +MINSTOP=hwmon5/device/pwm4=0 hwmon5/device/pwm3=12 hwmon5/device/pwm2=12 hwmon5/device/pwm1=0 +MAXPWM= hwmon5/device/pwm4=150 diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/installer.conf b/device/centec/x86_64-centec_e582_48x6q-r0/installer.conf index 5e62742c11bf..7d60bf73d366 100644 --- a/device/centec/x86_64-centec_e582_48x6q-r0/installer.conf +++ b/device/centec/x86_64-centec_e582_48x6q-r0/installer.conf @@ -1 +1,2 @@ CONSOLE_SPEED=115200 +ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="acpi_enforce_resources=no" diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/minigraph.xml b/device/centec/x86_64-centec_e582_48x6q-r0/minigraph.xml deleted file mode 100644 index 950c52a64134..000000000000 --- a/device/centec/x86_64-centec_e582_48x6q-r0/minigraph.xml +++ /dev/null @@ -1,1049 +0,0 @@ - - - - - - ARISTA01T0 - 10.0.0.33 - sonic - 10.0.0.32 - 1 - 180 - 60 - - - sonic - 10.0.0.0 - ARISTA01T2 - 10.0.0.1 - 1 - 180 - 60 - - - ARISTA02T0 - 10.0.0.35 - sonic - 10.0.0.34 - 1 - 180 - 60 - - - sonic - 10.0.0.2 - ARISTA02T2 - 10.0.0.3 - 1 - 180 - 60 - - - ARISTA03T0 - 10.0.0.37 - sonic - 10.0.0.36 - 1 - 180 - 60 - - - sonic - 10.0.0.4 - ARISTA03T2 - 10.0.0.5 - 1 - 180 - 60 - - - ARISTA04T0 - 10.0.0.39 - sonic - 10.0.0.38 - 1 - 180 - 60 - - - sonic - 10.0.0.6 - ARISTA04T2 - 10.0.0.7 - 1 - 180 - 60 - - - ARISTA05T0 - 10.0.0.41 - sonic - 10.0.0.40 - 1 - 180 - 60 - - - sonic - 10.0.0.8 - ARISTA05T2 - 10.0.0.9 - 1 - 180 - 60 - - - ARISTA06T0 - 10.0.0.43 - sonic - 10.0.0.42 - 1 - 180 - 60 - - - sonic - 10.0.0.10 - ARISTA06T2 - 10.0.0.11 - 1 - 180 - 60 - - - ARISTA07T0 - 10.0.0.45 - sonic - 10.0.0.44 - 1 - 180 - 60 - - - sonic - 10.0.0.12 - ARISTA07T2 - 10.0.0.13 - 1 - 180 - 60 - - - ARISTA08T0 - 10.0.0.47 - sonic - 10.0.0.46 - 1 - 180 - 60 - - - sonic - 10.0.0.14 - ARISTA08T2 - 10.0.0.15 - 1 - 180 - 60 - - - ARISTA09T0 - 10.0.0.49 - sonic - 10.0.0.48 - 1 - 180 - 60 - - - sonic - 10.0.0.16 - ARISTA09T2 - 10.0.0.17 - 1 - 180 - 60 - - - ARISTA10T0 - 10.0.0.51 - sonic - 10.0.0.50 - 1 - 180 - 60 - - - sonic - 10.0.0.18 - ARISTA10T2 - 10.0.0.19 - 1 - 180 - 60 - - - ARISTA11T0 - 10.0.0.53 - sonic - 10.0.0.52 - 1 - 180 - 60 - - - sonic - 10.0.0.20 - ARISTA11T2 - 10.0.0.21 - 1 - 180 - 60 - - - ARISTA12T0 - 10.0.0.55 - sonic - 10.0.0.54 - 1 - 180 - 60 - - - sonic - 10.0.0.22 - ARISTA12T2 - 10.0.0.23 - 1 - 180 - 60 - - - ARISTA13T0 - 10.0.0.57 - sonic - 10.0.0.56 - 1 - 180 - 60 - - - sonic - 10.0.0.24 - ARISTA13T2 - 10.0.0.25 - 1 - 180 - 60 - - - ARISTA14T0 - 10.0.0.59 - sonic - 10.0.0.58 - 1 - 180 - 60 - - - sonic - 10.0.0.26 - ARISTA14T2 - 10.0.0.27 - 1 - 180 - 60 - - - ARISTA15T0 - 10.0.0.61 - sonic - 10.0.0.60 - 1 - 180 - 60 - - - sonic - 10.0.0.28 - ARISTA15T2 - 10.0.0.29 - 1 - 180 - 60 - - - ARISTA16T0 - 10.0.0.63 - sonic - 10.0.0.62 - 1 - 180 - 60 - - - sonic - 10.0.0.30 - ARISTA16T2 - 10.0.0.31 - 1 - 180 - 60 - - - - - 65100 - sonic - - -
10.0.0.33
- - - - -
10.0.0.1
- - - - -
10.0.0.35
- - - - -
10.0.0.3
- - - - -
10.0.0.37
- - - - -
10.0.0.5
- - - - -
10.0.0.39
- - - - -
10.0.0.7
- - - - -
10.0.0.41
- - - - -
10.0.0.9
- - - - -
10.0.0.43
- - - - -
10.0.0.11
- - - - -
10.0.0.45
- - - - -
10.0.0.13
- - - - -
10.0.0.47
- - - - -
10.0.0.15
- - - - -
10.0.0.49
- - - - -
10.0.0.17
- - - - -
10.0.0.51
- - - - -
10.0.0.19
- - - - -
10.0.0.53
- - - - -
10.0.0.21
- - - - -
10.0.0.55
- - - - -
10.0.0.23
- - - - -
10.0.0.57
- - - - -
10.0.0.25
- - - - -
10.0.0.59
- - - - -
10.0.0.27
- - - - -
10.0.0.61
- - - - -
10.0.0.29
- - - - -
10.0.0.63
- - - - -
10.0.0.31
- - - - - - - - 64001 - ARISTA01T0 - - - - 65200 - ARISTA01T2 - - - - 64002 - ARISTA02T0 - - - - 65200 - ARISTA02T2 - - - - 64003 - ARISTA03T0 - - - - 65200 - ARISTA03T2 - - - - 64004 - ARISTA04T0 - - - - 65200 - ARISTA04T2 - - - - 64005 - ARISTA05T0 - - - - 65200 - ARISTA05T2 - - - - 64006 - ARISTA06T0 - - - - 65200 - ARISTA06T2 - - - - 64007 - ARISTA07T0 - - - - 65200 - ARISTA07T2 - - - - 64008 - ARISTA08T0 - - - - 65200 - ARISTA08T2 - - - - 64009 - ARISTA09T0 - - - - 65200 - ARISTA09T2 - - - - 64010 - ARISTA10T0 - - - - 65200 - ARISTA10T2 - - - - 64011 - ARISTA11T0 - - - - 65200 - ARISTA11T2 - - - - 64012 - ARISTA12T0 - - - - 65200 - ARISTA12T2 - - - - 64013 - ARISTA13T0 - - - - 65200 - ARISTA13T2 - - - - 64014 - ARISTA14T0 - - - - 65200 - ARISTA14T2 - - - - 64015 - ARISTA15T0 - - - - 65200 - ARISTA15T2 - - - - 64016 - ARISTA16T0 - - - - 65200 - ARISTA16T2 - - - - - - - - - - HostIP - Loopback0 - - 10.1.0.32/32 - - 10.1.0.32/32 - - - - - - - - sonic - - - - - - Ethernet0 - 10.0.0.0/31 - - - - Ethernet4 - 10.0.0.2/31 - - - - Ethernet8 - 10.0.0.4/31 - - - - Ethernet12 - 10.0.0.6/31 - - - - Ethernet16 - 10.0.0.8/31 - - - - Ethernet20 - 10.0.0.10/31 - - - - Ethernet24 - 10.0.0.12/31 - - - - Ethernet28 - 10.0.0.14/31 - - - - Ethernet32 - 10.0.0.16/31 - - - - Ethernet36 - 10.0.0.18/31 - - - - Ethernet40 - 10.0.0.20/31 - - - - Ethernet44 - 10.0.0.22/31 - - - - Ethernet48 - 10.0.0.24/31 - - - - Ethernet52 - 10.0.0.26/31 - - - - Ethernet56 - 10.0.0.28/31 - - - - Ethernet60 - 10.0.0.30/31 - - - - Ethernet64 - 10.0.0.32/31 - - - - Ethernet68 - 10.0.0.34/31 - - - - Ethernet72 - 10.0.0.36/31 - - - - Ethernet76 - 10.0.0.38/31 - - - - Ethernet80 - 10.0.0.40/31 - - - - Ethernet84 - 10.0.0.42/31 - - - - Ethernet88 - 10.0.0.44/31 - - - - Ethernet92 - 10.0.0.46/31 - - - - Ethernet96 - 10.0.0.48/31 - - - - Ethernet100 - 10.0.0.50/31 - - - - Ethernet104 - 10.0.0.52/31 - - - - Ethernet108 - 10.0.0.54/31 - - - - Ethernet112 - 10.0.0.56/31 - - - - Ethernet116 - 10.0.0.58/31 - - - - Ethernet120 - 10.0.0.60/31 - - - - Ethernet124 - 10.0.0.62/31 - - - - - - - - - - - - DeviceInterfaceLink - sonic - Ethernet0 - ARISTA01T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet4 - ARISTA02T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet8 - ARISTA03T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet12 - ARISTA04T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet16 - ARISTA05T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet20 - ARISTA06T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet24 - ARISTA07T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet28 - ARISTA08T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet32 - ARISTA09T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet36 - ARISTA10T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet40 - ARISTA11T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet44 - ARISTA12T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet48 - ARISTA13T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet52 - ARISTA14T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet56 - ARISTA15T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet60 - ARISTA16T2 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet64 - ARISTA01T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet68 - ARISTA02T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet72 - ARISTA03T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet76 - ARISTA04T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet80 - ARISTA05T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet84 - ARISTA06T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet88 - ARISTA07T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet92 - ARISTA08T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet96 - ARISTA09T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet100 - ARISTA10T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet104 - ARISTA11T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet108 - ARISTA12T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet112 - ARISTA13T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet116 - ARISTA14T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet120 - ARISTA15T0 - Ethernet1 - - - DeviceInterfaceLink - sonic - Ethernet124 - ARISTA16T0 - Ethernet1 - - - - - sonic - E582-48x6q - - - - sonic - E582-48x6q - diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/plugins/eeprom.py b/device/centec/x86_64-centec_e582_48x6q-r0/plugins/eeprom.py new file mode 100644 index 000000000000..3fd55c63d8b7 --- /dev/null +++ b/device/centec/x86_64-centec_e582_48x6q-r0/plugins/eeprom.py @@ -0,0 +1,31 @@ +#!/usr/bin/env python + +############################################################################# +# Centec E582-48X6Q +# +# Platform and model specific eeprom subclass, inherits from the base class, +# and provides the followings: +# - the eeprom format definition +# - specific encoder/decoder if there is special need +############################################################################# + +try: + import exceptions + import binascii + import time + import optparse + import warnings + import os + import sys + import subprocess + from sonic_eeprom import eeprom_base + from sonic_eeprom import eeprom_tlvinfo +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + + +class board(eeprom_tlvinfo.TlvInfoDecoder): + + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/sys/class/i2c-adapter/i2c-0/0-0057/eeprom" + super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/plugins/led_control.py b/device/centec/x86_64-centec_e582_48x6q-r0/plugins/led_control.py new file mode 100644 index 000000000000..d25bf6f8b473 --- /dev/null +++ b/device/centec/x86_64-centec_e582_48x6q-r0/plugins/led_control.py @@ -0,0 +1,153 @@ +#!/usr/bin/env python +# +# led_control.py +# +# Platform-specific LED control functionality for SONiC +# + +try: + from sonic_led.led_control_base import LedControlBase + import swsssdk + import threading + import os + import logging + import struct + import time + import syslog + from socket import * + from select import * +except ImportError, e: + raise ImportError(str(e) + " - required module not found") + + +def DBG_PRINT(str): + syslog.openlog("centec-led") + syslog.syslog(syslog.LOG_INFO, str) + syslog.closelog() + +class LedControl(LedControlBase): + """Platform specific LED control class""" + SONIC_PORT_NAME_PREFIX = "Ethernet" + LED_MODE_UP = [11, 1] + LED_MODE_DOWN = [7, 2] + + def _initSystemLed(self): + try: + with open(self.f_led.format("system"), 'w') as led_file: + led_file.write("5") + DBG_PRINT("init system led to normal") + with open(self.f_led.format("idn"), 'w') as led_file: + led_file.write("1") + DBG_PRINT("init idn led to off") + except IOError as e: + DBG_PRINT(str(e)) + + def _initPanelLed(self): + with open(self.f_led.format("port1"), 'r') as led_file: + shouldInit = (int(led_file.read()) == 0) + + if shouldInit == True: + for (port, ctlid, defmode) in self.led_mapping[1:59]: + data = struct.pack('=HHHBBH', 0, 7, 4, ctlid, defmode, port) + self.udpClient.sendto(data, ('localhost', 8101)) + + data = struct.pack('=HHHBB34B', 0, 3, 36, 34, 0, *[x[0] for x in self.led_mapping[1:35]]) + self.udpClient.sendto(data, ('localhost', 8101)) + data = struct.pack('=HHHBB24B', 0, 3, 26, 24, 1, *[x[0] for x in self.led_mapping[35:59]]) + self.udpClient.sendto(data, ('localhost', 8101)) + + data = struct.pack('=HHHB', 0, 5, 1, 1) + self.udpClient.sendto(data, ('localhost', 8101)) + + for idx in range(1, 55): + (port, ctlid, defmode) = self.led_mapping[idx] + with open(self.f_led.format("port{}".format(idx)), 'w') as led_file: + led_file.write(str(defmode)) + DBG_PRINT("init port{} led to mode={}".format(idx, defmode)) + + for idx in range(1, 55): + (port, ctlid, defmode) = self.led_mapping[idx] + with open(self.f_led.format("port{}".format(idx)), 'r') as led_file: + defmode = int(led_file.read()) + data = struct.pack('=HHHBBH', 0, 7, 4, ctlid, defmode, port) + self.udpClient.sendto(data, ('localhost', 8101)) + DBG_PRINT("init port{} led to mode={}".format(idx, defmode)) + + def _initDefaultConfig(self): + DBG_PRINT("start init led") + while True: + try: + r_sel = [self.udpClient] + echo_req = struct.pack('=HHH', 0, 1, 0) + self.udpClient.sendto(echo_req, ('localhost', 8101)) + result = select(r_sel, [], [], 1) + if self.udpClient in result[0]: + echo_rsp, srv_addr = self.udpClient.recvfrom(1024) + if echo_rsp: + break + DBG_PRINT("connect to sdk rpc server timeout, try again.") + except IOError as e: + DBG_PRINT(str(e)) + + DBG_PRINT("connect to sdk rpc server success.") + + self._initSystemLed() + self._initPanelLed() + + DBG_PRINT("init led done") + + + # Helper method to map SONiC port name to index + def _port_name_to_index(self, port_name): + # Strip "Ethernet" off port name + if not port_name.startswith(self.SONIC_PORT_NAME_PREFIX): + return -1 + + port_idx = int(port_name[len(self.SONIC_PORT_NAME_PREFIX):]) + return port_idx + + def _port_state_to_mode(self, port_idx, state): + if state == "up": + return self.LED_MODE_UP[0] if (port_idx < 49) else self.LED_MODE_UP[1] + else: + return self.LED_MODE_DOWN[0] if (port_idx < 49) else self.LED_MODE_DOWN[1] + + def _port_led_mode_update(self, port_idx, ledMode): + with open(self.f_led.format("port{}".format(port_idx)), 'w') as led_file: + led_file.write(str(ledMode)) + (port, ctlid) = (self.led_mapping[port_idx][0], self.led_mapping[port_idx][1]) + data = struct.pack('=HHHBBH', 0, 7, 4, ctlid, ledMode, port) + self.udpClient.sendto(data, ('localhost', 8101)) + + # Concrete implementation of port_link_state_change() method + def port_link_state_change(self, portname, state): + port_idx = self._port_name_to_index(portname) + ledMode = self._port_state_to_mode(port_idx, state) + with open(self.f_led.format("port{}".format(port_idx)), 'r') as led_file: + saveMode = int(led_file.read()) + + if ledMode == saveMode: + return + + self._port_led_mode_update(port_idx, ledMode) + DBG_PRINT("update {} led mode from {} to {}".format(portname, saveMode, ledMode)) + + # Constructor + def __init__(self): + # [macid, ctlid, defaultmode] + self.led_mapping = [(0, 0, 0)] # resv + self.led_mapping.extend([(4, 0, 7), (5, 0, 7), (6, 0, 7), (8, 0, 7), (9, 0, 7), (10, 0, 7), (12, 0, 7), (13, 0, 7)]) # panel port 1~8 + self.led_mapping.extend([(14, 0, 7), (16, 0, 7), (17, 0, 7), (18, 0, 7), (20, 0, 7), (21, 0, 7), (22, 0, 7), (24, 0, 7)]) # panel port 9~16 + self.led_mapping.extend([(25, 0, 7), (26, 0, 7), (28, 0, 7), (30, 0, 7), (31, 0, 7), (32, 0, 7), (34, 0, 7), (35, 0, 7)]) # panel port 17~24 + self.led_mapping.extend([(48, 0, 7), (49, 0, 7), (51, 0, 7), (36, 0, 7), (37, 0, 7), (39, 0, 7), (55, 0, 7), (54, 0, 7)]) # panel port 25~32 + self.led_mapping.extend([(53, 0, 7), (52, 0, 7), (52, 1, 7), (53, 1, 7), (54, 1, 7), (55, 1, 7), (38, 1, 7), (37, 1, 7)]) # panel port 33~40 + self.led_mapping.extend([(36, 1, 7), (51, 1, 7), (50, 1, 7), (49, 1, 7), (48, 1, 7), (34, 1, 7), (33, 1, 7), (32, 1, 7)]) # panel port 41~48 + self.led_mapping.extend([(28, 1, 2), (24, 1, 2), (20, 1, 2), (12, 1, 2), (8, 1, 2), (4, 1, 2)]) # panel port 49~54 + self.led_mapping.extend([(0, 1, 2), (0, 1, 2), (0, 1, 2), (0, 1, 2), (0, 1, 2), (0, 1, 2)]) + + self.f_led = "/sys/class/leds/{}/brightness" + + self.udpClient = socket(AF_INET, SOCK_DGRAM) + + self._initDefaultConfig() + diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/plugins/psuutil.py b/device/centec/x86_64-centec_e582_48x6q-r0/plugins/psuutil.py new file mode 100644 index 000000000000..5f8ba030c1f0 --- /dev/null +++ b/device/centec/x86_64-centec_e582_48x6q-r0/plugins/psuutil.py @@ -0,0 +1,74 @@ +#!/usr/bin/env python + +############################################################################# +# Mellanox +# +# Module contains an implementation of SONiC PSU Base API and +# provides the PSUs status which are available in the platform +# +############################################################################# + +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError (str(e) + "- required module not found") + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + def __init__(self): + PsuBase.__init__(self) + + self.psu_path = "/sys/class/psu/psu{}/" + self.psu_presence = "psu_presence" + self.psu_oper_status = "psu_status" + + def get_num_psus(self): + """ + Retrieves the number of PSUs available on the device + + :return: An integer, the number of PSUs available on the device + """ + return 2 + + def get_psu_status(self, index): + """ + Retrieves the oprational status of power supply unit (PSU) defined + by 1-based index + + :param index: An integer, 1-based index of the PSU of which to query status + :return: Boolean, True if PSU is operating properly, False if PSU is faulty + """ + if index is None: + return False + + status = 0 + try: + with open(self.psu_path.format(index) + self.psu_oper_status, 'r') as power_status: + status = int(power_status.read()) + except IOError: + return False + + return status == 0 + + def get_psu_presence(self, index): + """ + Retrieves the presence status of power supply unit (PSU) defined + by 1-based index + + :param index: An integer, 1-based index of the PSU of which to query status + :return: Boolean, True if PSU is plugged, False if not + """ + if index is None: + return False + + status = 0 + try: + with open(self.psu_path.format(index) + self.psu_presence, 'r') as presence_status: + status = int(presence_status.read()) + except IOError: + return False + + return status == 0 diff --git a/device/centec/x86_64-centec_e582_48x6q-r0/plugins/sfputil.py b/device/centec/x86_64-centec_e582_48x6q-r0/plugins/sfputil.py new file mode 100644 index 000000000000..7bb1ac0d4192 --- /dev/null +++ b/device/centec/x86_64-centec_e582_48x6q-r0/plugins/sfputil.py @@ -0,0 +1,160 @@ +#!/usr/bin/env python + +# sfputil.py +# +# Platform-specific SFP transceiver interface for SONiC +# + +try: + import time + import os + import logging + import struct + import syslog + from socket import * + from select import * + from sonic_sfp.sfputilbase import SfpUtilBase +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + + + +def DBG_PRINT(str): + print str + "\n" + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + SONIC_PORT_NAME_PREFIX = "Ethernet" + PORT_START = 1 + PORT_END = 54 + PORTS_IN_BLOCK = 54 + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_ports(self): + return range(49, self.PORTS_IN_BLOCK + 1) + + @property + def port_to_eeprom_mapping(self): + return self.eeprom_mapping + + def is_logical_port(self, port_name): + return True + + def get_logical_to_physical(self, port_name): + if not port_name.startswith(self.SONIC_PORT_NAME_PREFIX): + return None + + port_idx = int(port_name[len(self.SONIC_PORT_NAME_PREFIX):]) + + return [port_idx] + + def get_eeprom_data(self, port): + (ctlid, devid) = self.fiber_mapping[port] + offset = (128 if port in self.qsfp_ports else 0) + r_sel = [self.udpClient] + req = struct.pack('=HHHBBHIBBBBI', + 0, 9, 16, # lchip/msgtype/msglen + ctlid, # uint8 ctl_id + devid, # uint8 slave_dev_id + 0x50, # uint16 dev_addr + (1< self.port_end: + return False + try: + with open(self.f_sfp_present.format(port_num), 'r') as sfp_file: + return 1 == int(sfp_file.read()) + except IOError as e: + DBG_PRINT(str(e)) + + return False + + def get_low_power_mode(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + return False + + def set_low_power_mode(self, port_num, lpmode): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + return False + + def reset(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + return False + diff --git a/dockers/docker-orchagent/orchagent.sh b/dockers/docker-orchagent/orchagent.sh index af9e5b0766ab..7758ceeed590 100755 --- a/dockers/docker-orchagent/orchagent.sh +++ b/dockers/docker-orchagent/orchagent.sh @@ -20,6 +20,11 @@ elif [ "$platform" == "cavium" ]; then ORCHAGENT_ARGS+="-m $MAC_ADDRESS" elif [ "$platform" == "nephos" ]; then ORCHAGENT_ARGS+="-m $MAC_ADDRESS" +elif [ "$platform" == "centec" ]; then + last_byte=$(python -c "print '$MAC_ADDRESS'[-2:]") + aligned_last_byte=$(python -c "print format(int(int('$last_byte', 16) + 1), '02x')") # put mask and take away the 0x prefix + ALIGNED_MAC_ADDRESS=$(python -c "print '$MAC_ADDRESS'[:-2] + '$aligned_last_byte'") # put aligned byte into the end of MAC + ORCHAGENT_ARGS+="-m $ALIGNED_MAC_ADDRESS" elif [ "$platform" == "barefoot" ]; then ORCHAGENT_ARGS+="-m $MAC_ADDRESS" fi diff --git a/platform/centec/one-image.mk b/platform/centec/one-image.mk index 7ad205dce521..42e78ab4df34 100644 --- a/platform/centec/one-image.mk +++ b/platform/centec/one-image.mk @@ -3,6 +3,6 @@ SONIC_ONE_IMAGE = sonic-centec.bin $(SONIC_ONE_IMAGE)_MACHINE = centec $(SONIC_ONE_IMAGE)_IMAGE_TYPE = onie -$(SONIC_ONE_IMAGE)_INSTALLS += $(CENTEC_SDK_KERNEL) +$(SONIC_ONE_IMAGE)_INSTALLS += $(CENTEC_E582_48X6Q_PLATFORM_MODULE) $(SONIC_ONE_IMAGE)_DOCKERS += $(SONIC_INSTALL_DOCKER_IMAGES) SONIC_INSTALLERS += $(SONIC_ONE_IMAGE) diff --git a/platform/centec/platform-modules-centec-e582.mk b/platform/centec/platform-modules-centec-e582.mk new file mode 100644 index 000000000000..e86c428a7403 --- /dev/null +++ b/platform/centec/platform-modules-centec-e582.mk @@ -0,0 +1,19 @@ +# Centec E582-48X6Q Platform modules + + +CENTEC_E582_48X6Q_PLATFORM_MODULE_VERSION =1.1 +CENTEC_E582_48X2Q4Z_PLATFORM_MODULE_VERSION =1.1 + +export CENTEC_E582_48X6Q_PLATFORM_MODULE_VERSION +export CENTEC_E582_48X2Q4Z_PLATFORM_MODULE_VERSION + +CENTEC_E582_48X6Q_PLATFORM_MODULE = platform-modules-e582-48x6q_$(CENTEC_E582_48X6Q_PLATFORM_MODULE_VERSION)_amd64.deb + +$(CENTEC_E582_48X6Q_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-e582 +$(CENTEC_E582_48X6Q_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) +$(CENTEC_E582_48X6Q_PLATFORM_MODULE)_PLATFORM = x86_64-centec_e582_48x6q-r0 +SONIC_DPKG_DEBS += $(CENTEC_E582_48X6Q_PLATFORM_MODULE) + +CENTEC_E582_48X2Q4Z_PLATFORM_MODULE = platform-modules-e582-48x2q4z_$(CENTEC_E582_48X2Q4Z_PLATFORM_MODULE_VERSION)_amd64.deb +$(CENTEC_E582_48X2Q4Z_PLATFORM_MODULE)_PLATFORM = x86_64-centec_e582_48x2q4z-r0 +$(eval $(call add_extra_package,$(CENTEC_E582_48X6Q_PLATFORM_MODULE),$(CENTEC_E582_48X2Q4Z_PLATFORM_MODULE))) diff --git a/platform/centec/rules.mk b/platform/centec/rules.mk index 8b676f87ece4..823144dc25ce 100644 --- a/platform/centec/rules.mk +++ b/platform/centec/rules.mk @@ -1,5 +1,5 @@ +include $(PLATFORM_PATH)/platform-modules-centec-e582.mk include $(PLATFORM_PATH)/sdk.mk -include $(PLATFORM_PATH)/sai.mk include $(PLATFORM_PATH)/docker-orchagent-centec.mk include $(PLATFORM_PATH)/docker-syncd-centec.mk include $(PLATFORM_PATH)/docker-syncd-centec-rpc.mk diff --git a/platform/centec/sai.mk b/platform/centec/sai.mk deleted file mode 100644 index 299b36a69ebf..000000000000 --- a/platform/centec/sai.mk +++ /dev/null @@ -1,5 +0,0 @@ -# Centec SAI -CENTEC_SAI = libsai_1.0.0_amd64.deb -$(CENTEC_SAI)_URL = https://github.com/CentecNetworks/goldengate-sai/raw/master/lib/SONiC_1.0/libsai_1.0.0_amd64.deb - -SONIC_ONLINE_DEBS += $(CENTEC_SAI) diff --git a/platform/centec/sdk.mk b/platform/centec/sdk.mk index e3ce05f6b742..ba2d1adbe6a8 100644 --- a/platform/centec/sdk.mk +++ b/platform/centec/sdk.mk @@ -1,4 +1,5 @@ -CENTEC_SDK_KERNEL = centec-gg-sdk3.5-modules-3.16.0-4-amd64.deb -$(CENTEC_SDK_KERNEL)_URL = "https://github.com/CentecNetworks/goldengate-sai/raw/master/lib/SONiC_1.0/centec-gg-sdk3.5-modules-3.16.0-4-amd64.deb" +# Centec SAI +CENTEC_SAI = libsai_1.2.4_amd64.deb +$(CENTEC_SAI)_URL = https://github.com/CentecNetworks/goldengate-sai/raw/master/lib/SONiC_1.2.4/libsai_1.2.4-1.0_amd64.deb -SONIC_ONLINE_DEBS += $(CENTEC_SDK_KERNEL) +SONIC_ONLINE_DEBS += $(CENTEC_SAI) diff --git a/platform/centec/sonic-platform-modules-e582/48x2q4z/cfg/48x2q4z-modules.conf b/platform/centec/sonic-platform-modules-e582/48x2q4z/cfg/48x2q4z-modules.conf new file mode 100644 index 000000000000..5becd702a716 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x2q4z/cfg/48x2q4z-modules.conf @@ -0,0 +1,17 @@ +# /etc/modules: kernel modules to load at boot time. +# +# This file contains the names of kernel modules that should be loaded +# at boot time, one per line. Lines beginning with "#" are ignored. + +i2c-i801 +i2c-dev +i2c-mux +i2c-smbus + +i2c-mux-pca954x +lm77 +adt7470 +tun +centec_e582_48x6q_platform +dal +centec_at24c64 diff --git a/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/Makefile b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/Makefile new file mode 100644 index 000000000000..d1ca9824aa9e --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := centec_e582_48x2q4z_platform.o dal.o centec_at24c64.o +dal-y := dal_kernel.o dal_mpool.o diff --git a/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/centec_at24c64.c b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/centec_at24c64.c new file mode 100644 index 000000000000..52b8d536d0e6 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/centec_at24c64.c @@ -0,0 +1,657 @@ +/* + * at24.c - handle most I2C EEPROMs + * + * Copyright (C) 2005-2007 David Brownell + * Copyright (C) 2008 Wolfram Sang, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. + * Differences between different vendor product lines (like Atmel AT24C or + * MicroChip 24LC, etc) won't much matter for typical read/write access. + * There are also I2C RAM chips, likewise interchangeable. One example + * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes). + * + * However, misconfiguration can lose data. "Set 16-bit memory address" + * to a part with 8-bit addressing will overwrite data. Writing with too + * big a page size also loses data. And it's not safe to assume that the + * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC + * uses 0x51, for just one example. + * + * Accordingly, explicit board-specific configuration data should be used + * in almost all cases. (One partial exception is an SMBus used to access + * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.) + * + * So this driver uses "new style" I2C driver binding, expecting to be + * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or + * similar kernel-resident tables; or, configuration data coming from + * a bootloader. + * + * Other than binding model, current differences from "eeprom" driver are + * that this one handles write access and isn't restricted to 24c02 devices. + * It also handles larger devices (32 kbit and up) with two-byte addresses, + * which won't work on pure SMBus systems. + */ + +struct at24_data { + struct at24_platform_data chip; + struct memory_accessor macc; + int use_smbus; + + /* + * Lock protects against activities from other Linux tasks, + * but not from changes by other I2C masters. + */ + struct mutex lock; + struct bin_attribute bin; + + u8 *writebuf; + unsigned write_max; + unsigned num_addresses; + + /* + * Some chips tie up multiple I2C addresses; dummy devices reserve + * them for us, and we'll use them with SMBus calls. + */ + struct i2c_client *client[]; +}; + +/* + * This parameter is to help this driver avoid blocking other drivers out + * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C + * clock, one 256 byte read takes about 1/43 second which is excessive; + * but the 1/170 second it takes at 400 kHz may be quite reasonable; and + * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible. + * + * This value is forced to be a power of two so that writes align on pages. + */ +static unsigned io_limit = 128; +module_param(io_limit, uint, 0); +MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)"); + +/* + * Specs often allow 5 msec for a page write, sometimes 20 msec; + * it's important to recover from write timeouts. + */ +static unsigned write_timeout = 25; +module_param(write_timeout, uint, 0); +MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)"); + +#define AT24_SIZE_BYTELEN 5 +#define AT24_SIZE_FLAGS 8 + +#define AT24_BITMASK(x) (BIT(x) - 1) + +/* create non-zero magic value for given eeprom parameters */ +#define AT24_DEVICE_MAGIC(_len, _flags) \ + ((1 << AT24_SIZE_FLAGS | (_flags)) \ + << AT24_SIZE_BYTELEN | ilog2(_len)) + +static const struct i2c_device_id at24_ctc_ids[] = { + { "24c64-ctc", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16 | AT24_FLAG_READONLY | AT24_FLAG_IRUGO) }, + { /* END OF LIST */ } +}; +MODULE_DEVICE_TABLE(i2c, at24_ctc_ids); + +/*-------------------------------------------------------------------------*/ + +/* + * This routine supports chips which consume multiple I2C addresses. It + * computes the addressing information to be used for a given r/w request. + * Assumes that sanity checks for offset happened at sysfs-layer. + */ +static struct i2c_client *at24_translate_offset(struct at24_data *at24, + unsigned *offset) +{ + unsigned i; + + if (at24->chip.flags & AT24_FLAG_ADDR16) { + i = *offset >> 16; + *offset &= 0xffff; + } else { + i = *offset >> 8; + *offset &= 0xff; + } + + return at24->client[i]; +} + +static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, + unsigned offset, size_t count) +{ + struct i2c_msg msg[2]; + struct i2c_client *client; + unsigned long timeout, read_time; + int status; + + memset(msg, 0, sizeof(msg)); + + /* + * REVISIT some multi-address chips don't rollover page reads to + * the next slave address, so we may need to truncate the count. + * Those chips might need another quirk flag. + * + * If the real hardware used four adjacent 24c02 chips and that + * were misconfigured as one 24c08, that would be a similar effect: + * one "eeprom" file not four, but larger reads would fail when + * they crossed certain pages. + */ + + /* + * Slave address and byte offset derive from the offset. Always + * set the byte address; on a multi-master board, another master + * may have changed the chip's "current" address pointer. + */ + client = at24_translate_offset(at24, &offset); + + if (count > io_limit) + count = io_limit; + + count = 1; + + /* + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + read_time = jiffies; + + status = i2c_smbus_write_byte_data(client, (offset >> 8) & 0x0ff, offset & 0x0ff ); + status = i2c_smbus_read_byte(client); + if (status >= 0) { + buf[0] = status; + status = count; + } + + dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", + count, offset, status, jiffies); + + if (status == count) + return count; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(read_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t at24_read(struct at24_data *at24, + char *buf, loff_t off, size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) + return count; + + memset(buf, 0, count); + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&at24->lock); + + while (count) { + ssize_t status; + + status = at24_eeprom_read(at24, buf, off, count); + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + //printk(KERN_ALERT "at24_read buf = %s, retval = %zu\n", buf, retval); + + mutex_unlock(&at24->lock); + + return retval; +} + +static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct at24_data *at24; + + at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); + return at24_read(at24, buf, off, count); +} + + +/* + * Note that if the hardware write-protect pin is pulled high, the whole + * chip is normally write protected. But there are plenty of product + * variants here, including OTP fuses and partial chip protect. + * + * We only use page mode writes; the alternative is sloooow. This routine + * writes at most one page. + */ +static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf, + unsigned offset, size_t count) +{ + struct i2c_client *client; + ssize_t status; + unsigned long timeout, write_time; + unsigned next_page; + + /* Get corresponding I2C address and adjust offset */ + client = at24_translate_offset(at24, &offset); + + /* write_max is at most a page */ + if (count > at24->write_max) + count = at24->write_max; + + /* Never roll over backwards, to the start of this page */ + next_page = roundup(offset + 1, at24->chip.page_size); + if (offset + count > next_page) + count = next_page - offset; + + /* + * Writes fail if the previous one didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + write_time = jiffies; + + status = i2c_smbus_write_word_data(client, + (offset >> 8) & 0x0ff, (offset & 0xFF) | buf[0]); + if (status == 0) + status = count; + + dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n", + count, offset, status, jiffies); + + if (status == count) + return count; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(write_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, + size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) + return count; + + /* + * Write data to chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&at24->lock); + + while (count) { + ssize_t status; + + status = at24_eeprom_write(at24, buf, off, 1); /* only one-byte to write; TODO page wirte */ + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&at24->lock); + + return retval; +} + +static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct at24_data *at24; + + if (unlikely(off >= attr->size)) + return -EFBIG; + + at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); + return at24_write(at24, buf, off, count); +} + +/*-------------------------------------------------------------------------*/ + +/* + * This lets other kernel code access the eeprom data. For example, it + * might hold a board's Ethernet address, or board-specific calibration + * data generated on the manufacturing floor. + */ + +static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf, + off_t offset, size_t count) +{ + struct at24_data *at24 = container_of(macc, struct at24_data, macc); + + return at24_read(at24, buf, offset, count); +} + +static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf, + off_t offset, size_t count) +{ + struct at24_data *at24 = container_of(macc, struct at24_data, macc); + + return at24_write(at24, buf, offset, count); +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_OF +static void at24_get_ofdata(struct i2c_client *client, + struct at24_platform_data *chip) +{ + const __be32 *val; + struct device_node *node = client->dev.of_node; + + if (node) { + if (of_get_property(node, "read-only", NULL)) + chip->flags |= AT24_FLAG_READONLY; + val = of_get_property(node, "pagesize", NULL); + if (val) + chip->page_size = be32_to_cpup(val); + } +} +#else +static void at24_get_ofdata(struct i2c_client *client, + struct at24_platform_data *chip) +{ } +#endif /* CONFIG_OF */ + +static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct at24_platform_data chip; + bool writable; + int use_smbus = 0; + struct at24_data *at24; + int err; + unsigned i, num_addresses; + kernel_ulong_t magic; + + if (client->dev.platform_data) { + chip = *(struct at24_platform_data *)client->dev.platform_data; + } else { + if (!id->driver_data) + return -ENODEV; + + magic = id->driver_data; + chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN)); + magic >>= AT24_SIZE_BYTELEN; + chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS); + + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + chip.page_size = 1; + + /* update chipdata if OF is present */ + at24_get_ofdata(client, &chip); + + printk(KERN_ALERT "at24_probe chip.byte_len = 0x%x\n", chip.byte_len); + printk(KERN_ALERT "at24_probe chip.flags = 0x%x\n", chip.flags); + printk(KERN_ALERT "at24_probe chip.magic = 0x%lx\n", id->driver_data); + + chip.setup = NULL; + chip.context = NULL; + } + + if (!is_power_of_2(chip.byte_len)) + dev_warn(&client->dev, + "byte_len looks suspicious (no power of 2)!\n"); + if (!chip.page_size) { + dev_err(&client->dev, "page_size must not be 0!\n"); + return -EINVAL; + } + if (!is_power_of_2(chip.page_size)) + dev_warn(&client->dev, + "page_size looks suspicious (no power of 2)!\n"); + + /* Use I2C operations unless we're stuck with SMBus extensions. */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + use_smbus = I2C_SMBUS_I2C_BLOCK_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) { + use_smbus = I2C_SMBUS_WORD_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + use_smbus = I2C_SMBUS_BYTE_DATA; + } else { + return -EPFNOSUPPORT; + } + use_smbus = I2C_SMBUS_BYTE_DATA; + printk(KERN_ALERT "at24_probe use_smbus --> %d\n", + use_smbus); + } + + if (chip.flags & AT24_FLAG_TAKE8ADDR) + num_addresses = 8; + else + num_addresses = DIV_ROUND_UP(chip.byte_len, + (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + + at24 = devm_kzalloc(&client->dev, sizeof(struct at24_data) + + num_addresses * sizeof(struct i2c_client *), GFP_KERNEL); + if (!at24) + return -ENOMEM; + + mutex_init(&at24->lock); + at24->use_smbus = use_smbus; + at24->chip = chip; + at24->num_addresses = num_addresses; + + /* + * Export the EEPROM bytes through sysfs, since that's convenient. + * By default, only root should see the data (maybe passwords etc) + */ + sysfs_bin_attr_init(&at24->bin); + at24->bin.attr.name = "eeprom"; + at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; + at24->bin.read = at24_bin_read; + at24->bin.size = chip.byte_len; + + at24->macc.read = at24_macc_read; + + writable = !(chip.flags & AT24_FLAG_READONLY); + if (writable) { + if (!use_smbus || i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { + + unsigned write_max = chip.page_size; + + at24->macc.write = at24_macc_write; + + at24->bin.write = at24_bin_write; + at24->bin.attr.mode |= S_IWUSR; + + if (write_max > io_limit) + write_max = io_limit; + if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) + write_max = I2C_SMBUS_BLOCK_MAX; + at24->write_max = write_max; + + /* buffer (data + address at the beginning) */ + at24->writebuf = devm_kzalloc(&client->dev, + write_max + 2, GFP_KERNEL); + if (!at24->writebuf) + return -ENOMEM; + } else { + dev_warn(&client->dev, + "cannot write due to controller restrictions."); + } + } + + at24->client[0] = client; + + /* use dummy devices for multiple-address chips */ + for (i = 1; i < num_addresses; i++) { + at24->client[i] = i2c_new_dummy(client->adapter, + client->addr + i); + if (!at24->client[i]) { + dev_err(&client->dev, "address 0x%02x unavailable\n", + client->addr + i); + err = -EADDRINUSE; + goto err_clients; + } + } + + err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); + if (err) + goto err_clients; + + i2c_set_clientdata(client, at24); + + dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n", + at24->bin.size, client->name, + writable ? "writable" : "read-only", at24->write_max); + if (use_smbus == I2C_SMBUS_WORD_DATA || + use_smbus == I2C_SMBUS_BYTE_DATA) { + dev_notice(&client->dev, "Falling back to %s reads, " + "performance will suffer\n", use_smbus == + I2C_SMBUS_WORD_DATA ? "word" : "byte"); + } + + /* export data to kernel code */ + if (chip.setup) + chip.setup(&at24->macc, chip.context); + + return 0; + +err_clients: + for (i = 1; i < num_addresses; i++) + if (at24->client[i]) + i2c_unregister_device(at24->client[i]); + + return err; +} + +static int at24_remove(struct i2c_client *client) +{ + struct at24_data *at24; + int i; + + at24 = i2c_get_clientdata(client); + sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); + + for (i = 1; i < at24->num_addresses; i++) + i2c_unregister_device(at24->client[i]); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct i2c_board_info i2c_devs = { + I2C_BOARD_INFO("24c64-ctc", 0x57), +}; + +static struct i2c_adapter *adapter = NULL; +static struct i2c_client *client = NULL; + +static int ctc_at24c64_init(void) +{ + printk(KERN_ALERT "ctc_at24c64_init\n"); + + adapter = i2c_get_adapter(0); + if(adapter == NULL){ + printk(KERN_ALERT "i2c_get_adapter == NULL\n"); + return -1; + } + + client = i2c_new_device(adapter, &i2c_devs); + if(client == NULL){ + printk(KERN_ALERT "i2c_new_device == NULL\n"); + i2c_put_adapter(adapter); + adapter = NULL; + return -1; + } + + return 0; +} + +static void ctc_at24c64_exit(void) +{ + printk(KERN_ALERT "ctc_at24c64_exit\n"); + if(client){ + i2c_unregister_device(client); + } + if(adapter){ + i2c_put_adapter(adapter); + } +} + +static struct i2c_driver at24_ctc_driver = { + .driver = { + .name = "at24-ctc", + .owner = THIS_MODULE, + }, + .probe = at24_probe, + .remove = at24_remove, + .id_table = at24_ctc_ids, +}; + +static int __init at24_ctc_init(void) +{ + if (!io_limit) { + pr_err("at24_ctc: io_limit must not be 0!\n"); + return -EINVAL; + } + + io_limit = rounddown_pow_of_two(io_limit); + + ctc_at24c64_init(); + + return i2c_add_driver(&at24_ctc_driver); +} +module_init(at24_ctc_init); + +static void __exit at24_ctc_exit(void) +{ + ctc_at24c64_exit(); + i2c_del_driver(&at24_ctc_driver); +} +module_exit(at24_ctc_exit); + +MODULE_DESCRIPTION("Driver for most I2C EEPROMs"); +MODULE_AUTHOR("David Brownell and Wolfram Sang"); +MODULE_LICENSE("GPL"); diff --git a/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/centec_e582_48x2q4z_platform.c b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/centec_e582_48x2q4z_platform.c new file mode 100644 index 000000000000..003f9a80caf0 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/centec_e582_48x2q4z_platform.c @@ -0,0 +1,142 @@ +#include +#include +#include +#include + +#define PCA9548_CHANNEL_NUM 8 +#define PCA9548_ADAPT_ID_START 10 + +static struct pca954x_platform_mode i2c_dev_pca9548_platform_mode[PCA9548_CHANNEL_NUM] = { + [0] = { + .adap_id = PCA9548_ADAPT_ID_START, + .deselect_on_exit = 1, + .class = 0, + }, + [1] = { + .adap_id = PCA9548_ADAPT_ID_START + 1, + .deselect_on_exit = 1, + .class = 0, + }, + [2] = { + .adap_id = PCA9548_ADAPT_ID_START + 2, + .deselect_on_exit = 1, + .class = 0, + }, + [3] = { + .adap_id = PCA9548_ADAPT_ID_START + 3, + .deselect_on_exit = 1, + .class = 0, + }, + [4] = { + .adap_id = PCA9548_ADAPT_ID_START + 4, + .deselect_on_exit = 1, + .class = 0, + }, + [5] = { + .adap_id = PCA9548_ADAPT_ID_START + 5, + .deselect_on_exit = 1, + .class = 0, + }, + [6] = { + .adap_id = PCA9548_ADAPT_ID_START + 6, + .deselect_on_exit = 1, + .class = 0, + }, + [7] = { + .adap_id = PCA9548_ADAPT_ID_START + 7, + .deselect_on_exit = 1, + .class = 0, + } +}; + +static struct pca954x_platform_data i2c_dev_pca9548_platform_data = { + .modes = i2c_dev_pca9548_platform_mode, + .num_modes = PCA9548_CHANNEL_NUM, +}; + +static struct i2c_board_info i2c_dev_pca9548 = { + I2C_BOARD_INFO("pca9548", 0x70), + .platform_data = &i2c_dev_pca9548_platform_data, +}; + +static struct i2c_board_info i2c_dev_adt7475 = { + I2C_BOARD_INFO("adt7470", 0x2F), +}; + +struct i2c_adapter *i2c_core_master = NULL; /* i2c-0-cpu */ +struct i2c_adapter *i2c_mux_channel_4 = NULL; /* pca9548x-channel 5 */ +struct i2c_client *i2c_client_pca9548x = NULL; +struct i2c_client *i2c_client_adt7475 = NULL; + +static int e582_48x6q_init(void) +{ + printk(KERN_INFO "install e582_48x6q board dirver...\n"); + + /* find i2c-core master */ + i2c_core_master = i2c_get_adapter(0); + if(i2c_core_master == NULL) + { + printk(KERN_CRIT "can't find i2c-core bus\n"); + goto err_i2c_core_master; + } + + /* install i2c-mux */ + i2c_client_pca9548x = i2c_new_device(i2c_core_master, &i2c_dev_pca9548); + if(i2c_client_pca9548x == NULL) + { + printk(KERN_INFO "install e582_48x6q board pca9548 failed\n"); + goto install_at24c64; + } + + /* install adt7475 */ + /* find i2c-mux-channel 15 */ + i2c_mux_channel_4 = i2c_get_adapter(PCA9548_ADAPT_ID_START + 4); + if(i2c_mux_channel_4 == NULL) + { + printk(KERN_INFO "install e582_48x6q board adt7470 failed\n"); + goto install_at24c64; + } + + i2c_client_adt7475 = i2c_new_device(i2c_mux_channel_4, &i2c_dev_adt7475); + if(i2c_client_adt7475 == NULL){ + printk(KERN_INFO "install e582_48x6q board adt7470 failed\n"); + goto install_at24c64; + } + +install_at24c64: + + printk(KERN_INFO "install e582_48x6q board dirver...ok\n"); + return 0; + +err_i2c_core_master: + return -1; +} + +static void e582_48x6q_exit(void) +{ + printk(KERN_INFO "uninstall e582_48x6q board dirver...\n"); + + /* uninstall adt7475 master */ + if(i2c_client_adt7475) { + i2c_unregister_device(i2c_client_adt7475); + } + if(i2c_mux_channel_4) { + i2c_put_adapter(i2c_mux_channel_4); + } + + /* uninstall i2c-core master */ + if(i2c_client_pca9548x) { + i2c_unregister_device(i2c_client_pca9548x); + } + + /* uninstall i2c-core master */ + if(i2c_core_master) { + i2c_put_adapter(i2c_core_master); + } +} + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("xuwj centecNetworks, Inc"); +MODULE_DESCRIPTION("e582-48x6q board driver"); +module_init(e582_48x6q_init); +module_exit(e582_48x6q_exit); diff --git a/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_kernel.c b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_kernel.c new file mode 100644 index 000000000000..4c9a3da64e6e --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_kernel.c @@ -0,0 +1,1814 @@ +/** + @file dal_kernal.c + + @date 2012-10-18 + + @version v2.0 + + +*/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 0, 0)) +#include +#endif +#include "dal_kernel.h" +#include "dal_mpool.h" + +MODULE_AUTHOR("Centec Networks Inc."); +MODULE_DESCRIPTION("DAL kernel module"); +MODULE_LICENSE("GPL"); + +/* DMA memory pool size */ +static char* dma_pool_size; +module_param(dma_pool_size, charp, 0); +MODULE_PARM_DESC(dma_pool_size, + "Specify DMA memory pool size (default 4MB)"); + +/***************************************************************************** + * defines + *****************************************************************************/ +#define MB_SIZE 0x100000 +#define CTC_MAX_INTR_NUM 8 + +#define MEM_MAP_RESERVE SetPageReserved +#define MEM_MAP_UNRESERVE ClearPageReserved + +#define CTC_VENDOR_VID 0xc001 +#define CTC_HUMBER_DEVICE_ID 0x6048 +#define CTC_GOLDENGATE_DEVICE_ID 0xcb10 + +#define MEM_MAP_RESERVE SetPageReserved +#define MEM_MAP_UNRESERVE ClearPageReserved + +#define CTC_GREATBELT_DEVICE_ID 0x03e8 /* TBD */ +#define DAL_MAX_CHIP_NUM 8 /* [GB] used */ +#define VIRT_TO_PAGE(p) virt_to_page((p)) +#define DAL_UNTAG_BLOCK 0 +#define DAL_DISCARD_BLOCK 1 +#define DAL_MATCHED_BLOCK 2 +#define DAL_CUR_MATCH_BLOCk 3 +/***************************************************************************** + * typedef + *****************************************************************************/ +/* Control Data */ +typedef struct dal_isr_s +{ + int irq; + void (* isr)(void*); + void* isr_data; + int trigger; + int count; + wait_queue_head_t wqh; +} dal_isr_t; + +typedef struct dal_kernel_dev_s +{ + struct list_head list; + struct pci_dev* pci_dev; + + /* PCI I/O mapped base address */ + uintptr logic_address; + + /* Physical address */ + uintptr phys_address; +} dal_kern_dev_t; + +typedef struct _dma_segment +{ + struct list_head list; + unsigned long req_size; /* Requested DMA segment size */ + unsigned long blk_size; /* DMA block size */ + unsigned long blk_order; /* DMA block size in alternate format */ + unsigned long seg_size; /* Current DMA segment size */ + unsigned long seg_begin; /* Logical address of segment */ + unsigned long seg_end; /* Logical end address of segment */ + unsigned long* blk_ptr; /* Array of logical DMA block addresses */ + int blk_cnt_max; /* Maximum number of block to allocate */ + int blk_cnt; /* Current number of blocks allocated */ +} dma_segment_t; + +typedef irqreturn_t (*p_func) (int irq, void* dev_id); + +/*************************************************************************** + *declared + ***************************************************************************/ +static unsigned int linux_dal_poll0(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll1(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll2(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll3(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll4(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll5(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll6(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll7(struct file* filp, struct poll_table_struct* p); + +/***************************************************************************** + * global variables + *****************************************************************************/ +static dal_kern_dev_t dal_dev[DAL_MAX_CHIP_NUM]; +static dal_isr_t dal_isr[CTC_MAX_INTR_NUM]; +static int dal_chip_num = 0; +static int dal_version = 0; +static int dal_intr_num = 0; +static int use_high_memory = 0; +static unsigned int* dma_virt_base[DAL_MAX_CHIP_NUM]; +#ifndef DMA_MEM_MODE_PLATFORM +static unsigned int* dma_virt_base_tmp[DAL_MAX_CHIP_NUM]; +#endif +static uintptr dma_phy_base[DAL_MAX_CHIP_NUM]; +static unsigned int dma_mem_size = 0x800000; +static unsigned int msi_irq_base[DAL_MAX_CHIP_NUM]; +static unsigned int msi_irq_num[DAL_MAX_CHIP_NUM]; +static unsigned int msi_used = 0; +static struct class *dal_class; + +static LIST_HEAD(_dma_seg); +static int dal_debug = 0; +module_param(dal_debug, int, 0); +MODULE_PARM_DESC(dal_debug, "Set debug level (default 0)"); + +static struct pci_device_id dal_id_table[] = +{ + {PCI_DEVICE(CTC_VENDOR_VID, CTC_GREATBELT_DEVICE_ID)}, + {PCI_DEVICE(0xcb10, 0xc010)}, + {0, }, +}; + +static wait_queue_head_t poll_intr[CTC_MAX_INTR_NUM]; + +p_func intr_handler_fun[CTC_MAX_INTR_NUM]; + +static int poll_intr_trigger[CTC_MAX_INTR_NUM]; + +static struct file_operations dal_intr_fops[CTC_MAX_INTR_NUM] = +{ + { + .owner = THIS_MODULE, + .poll = linux_dal_poll0, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll1, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll2, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll3, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll4, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll5, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll6, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll7, + }, +}; + +/***************************************************************************** + * macros + *****************************************************************************/ +#define VERIFY_CHIP_INDEX(n) (n < dal_chip_num) + +#define _KERNEL_INTERUPT_PROCESS +static irqreturn_t +intr0_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + + if(poll_intr_trigger[0]) + { + return IRQ_HANDLED; + } + + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[0] = 1; + wake_up(&poll_intr[0]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr1_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[1]) + { + return IRQ_HANDLED; + } + + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[1] = 1; + wake_up(&poll_intr[1]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr2_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[2]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[2] = 1; + wake_up(&poll_intr[2]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr3_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[3]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[3] = 1; + wake_up(&poll_intr[3]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr4_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[4]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[4] = 1; + wake_up(&poll_intr[4]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr5_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[5]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[5] = 1; + wake_up(&poll_intr[5]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr6_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[6]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[6] = 1; + wake_up(&poll_intr[6]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr7_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[7]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[7] = 1; + wake_up(&poll_intr[7]); + } + } + + return IRQ_HANDLED; +} + +int +dal_interrupt_register(unsigned int irq, int prio, void (* isr)(void*), void* data) +{ + int ret; + unsigned char str[16]; + unsigned char* int_name = NULL; + unsigned int intr_num_tmp = 0; + unsigned int intr_num = CTC_MAX_INTR_NUM; + unsigned long irq_flags = 0; + + if (dal_intr_num >= CTC_MAX_INTR_NUM) + { + printk("Interrupt numbers exceeds max.\n"); + return -1; + } + + if (msi_used) + { + int_name = "dal_msi"; + } + else + { + int_name = "dal_intr"; + } + + + for (intr_num_tmp=0;intr_num_tmp < CTC_MAX_INTR_NUM; intr_num_tmp++) + { + if (irq == dal_isr[intr_num_tmp].irq) + { + dal_isr[intr_num_tmp].count++; + printk("Interrupt irq %d register count %d.\n", irq, dal_isr[intr_num_tmp].count); + return 0; + } + if ((0 == dal_isr[intr_num_tmp].irq) && (CTC_MAX_INTR_NUM == intr_num)) + { + intr_num = intr_num_tmp; + dal_isr[intr_num].count = 0; + } + } + dal_isr[intr_num].irq = irq; + dal_isr[intr_num].isr = isr; + dal_isr[intr_num].isr_data = data; + dal_isr[intr_num].count++; + + init_waitqueue_head(&poll_intr[intr_num]); + + /* only user mode */ + if ((NULL == isr) && (NULL == data)) + { + snprintf(str, 16, "%s%d", "dal_intr", intr_num); + ret = register_chrdev(DAL_DEV_INTR_MAJOR_BASE + intr_num, + str, &dal_intr_fops[intr_num]); + if (ret < 0) + { + printk("Register character device for irq %d failed, ret= %d", irq, ret); + return ret; + } + } +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 1, 0)) + irq_flags = 0; +#else + irq_flags = IRQF_DISABLED; +#endif + if ((ret = request_irq(irq, + intr_handler_fun[intr_num], + irq_flags, + int_name, + &dal_isr[intr_num])) < 0) + { + printk("Cannot request irq %d, ret %d.\n", irq, ret); + unregister_chrdev(DAL_DEV_INTR_MAJOR_BASE + intr_num, str); + } + + if (0 == ret) + { + dal_intr_num++; + } + + return ret; +} + +int +dal_interrupt_unregister(unsigned int irq) +{ + unsigned char str[16]; + int intr_idx = 0; + int find_flag = 0; + + /* get intr device index */ + for (intr_idx = 0; intr_idx < CTC_MAX_INTR_NUM; intr_idx++) + { + if (dal_isr[intr_idx].irq == irq) + { + find_flag = 1; + break; + } + } + + if (find_flag == 0) + { + printk ("irq%d is not registered! unregister failed \n", irq); + return -1; + } + + dal_isr[intr_idx].count--; + if (0 != dal_isr[intr_idx].count) + { + printk("Interrupt irq %d unregister count %d.\n", irq, dal_isr[intr_idx].count); + return -1; + } + snprintf(str, 16, "%s%d", "dal_intr", intr_idx); + + unregister_chrdev(DAL_DEV_INTR_MAJOR_BASE + intr_idx, str); + + free_irq(irq, &dal_isr[intr_idx]); + + dal_isr[intr_idx].irq = 0; + + dal_intr_num--; + + return 0; +} + +int +dal_interrupt_set_en(unsigned int irq, unsigned int enable) +{ + enable ? enable_irq(irq) : disable_irq_nosync(irq); + return 0; +} + +static int +_dal_set_msi_enabe(unsigned int lchip, unsigned int irq_num) +{ + int ret = 0; + + if (irq_num == 1) + { + ret = pci_enable_msi(dal_dev[lchip].pci_dev); + if (ret) + { + printk ("msi enable failed!!! lchip = %d, irq_num = %d\n", lchip, irq_num); + pci_disable_msi(dal_dev[lchip].pci_dev); + msi_used = 0; + } + + msi_irq_base[lchip] = dal_dev[lchip].pci_dev->irq; + msi_irq_num[lchip] = 1; + } + else + { +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 14, 79)) + ret = pci_enable_msi_exact(dal_dev[lchip].pci_dev, irq_num); +#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 26, 32)) + ret = pci_enable_msi_block(dal_dev[lchip].pci_dev, irq_num); +#else + ret = -1; +#endif + if (ret) + { + printk ("msi enable failed!!! lchip = %d, irq_num = %d\n", lchip, irq_num); + pci_disable_msi(dal_dev[lchip].pci_dev); + msi_used = 0; + } + + msi_irq_base[lchip] = dal_dev[lchip].pci_dev->irq; + msi_irq_num[lchip] = irq_num; + } + + return ret; +} + +static int +_dal_set_msi_disable(unsigned int lchip) +{ + + pci_disable_msi(dal_dev[lchip].pci_dev); + + msi_irq_base[lchip] = 0; + msi_irq_num[lchip] = 0; + + return 0; +} + +int +dal_set_msi_cap(unsigned long arg) +{ + int ret = 0; + dal_msi_info_t msi_info; + + if (copy_from_user(&msi_info, (void*)arg, sizeof(dal_msi_info_t))) + { + return -EFAULT; + } + + printk("####dal_set_msi_cap lchip %d base %d num:%d\n", msi_info.lchip, msi_info.irq_base, msi_info.irq_num); + if (msi_info.irq_num > 0) + { + msi_used = 1; + ret = _dal_set_msi_enabe(msi_info.lchip, msi_info.irq_num); + } + else + { + msi_used = 0; + ret = _dal_set_msi_disable(msi_info.lchip); + } + + return ret; +} + +int +dal_user_interrupt_register(unsigned long arg) +{ + int irq = 0; + if (copy_from_user(&irq, (void*)arg, sizeof(int))) + { + return -EFAULT; + } + printk("####register interrupt irq:%d\n", irq); + return dal_interrupt_register(irq, 0, NULL, NULL); +} + +int +dal_user_interrupt_unregister(unsigned long arg) +{ + int irq = 0; + if (copy_from_user(&irq, (void*)arg, sizeof(int))) + { + return -EFAULT; + } + printk("####unregister interrupt irq:%d\n", irq); + return dal_interrupt_unregister(irq); +} + +int +dal_user_interrupt_set_en(unsigned long arg) +{ + dal_intr_parm_t dal_intr_parm; + + if (copy_from_user(&dal_intr_parm, (void*)arg, sizeof(dal_intr_parm_t))) + { + return -EFAULT; + } + + return dal_interrupt_set_en(dal_intr_parm.irq, dal_intr_parm.enable); +} + +/* + * Function: _dal_dma_segment_free + */ + +/* + * Function: _find_largest_segment + * + * Purpose: + * Find largest contiguous segment from a pool of DMA blocks. + * Parameters: + * dseg - DMA segment descriptor + * Returns: + * 0 on success, < 0 on error. + * Notes: + * Assembly stops if a segment of the requested segment size + * has been obtained. + * + * Lower address bits of the DMA blocks are used as follows: + * 0: Untagged + * 1: Discarded block + * 2: Part of largest contiguous segment + * 3: Part of current contiguous segment + */ +#ifndef DMA_MEM_MODE_PLATFORM +static int +_dal_find_largest_segment(dma_segment_t* dseg) +{ + int i, j, blks, found; + unsigned long seg_begin; + unsigned long seg_end; + unsigned long seg_tmp; + + blks = dseg->blk_cnt; + + /* Clear all block tags */ + for (i = 0; i < blks; i++) + { + dseg->blk_ptr[i] &= ~3; + } + + for (i = 0; i < blks && dseg->seg_size < dseg->req_size; i++) + { + /* First block must be an untagged block */ + if ((dseg->blk_ptr[i] & 3) == DAL_UNTAG_BLOCK) + { + /* Initial segment size is the block size */ + seg_begin = dseg->blk_ptr[i]; + seg_end = seg_begin + dseg->blk_size; + dseg->blk_ptr[i] |= DAL_CUR_MATCH_BLOCk; + + /* Loop looking for adjacent blocks */ + do + { + found = 0; + + for (j = i + 1; j < blks && (seg_end - seg_begin) < dseg->req_size; j++) + { + seg_tmp = dseg->blk_ptr[j]; + /* Check untagged blocks only */ + if ((seg_tmp & 3) == DAL_UNTAG_BLOCK) + { + if (seg_tmp == (seg_begin - dseg->blk_size)) + { + /* Found adjacent block below current segment */ + dseg->blk_ptr[j] |= DAL_CUR_MATCH_BLOCk; + seg_begin = seg_tmp; + found = 1; + } + else if (seg_tmp == seg_end) + { + /* Found adjacent block above current segment */ + dseg->blk_ptr[j] |= DAL_CUR_MATCH_BLOCk; + seg_end += dseg->blk_size; + found = 1; + } + } + } + } + while (found); + + if ((seg_end - seg_begin) > dseg->seg_size) + { + /* The current block is largest so far */ + dseg->seg_begin = seg_begin; + dseg->seg_end = seg_end; + dseg->seg_size = seg_end - seg_begin; + + /* Re-tag current and previous largest segment */ + for (j = 0; j < blks; j++) + { + if ((dseg->blk_ptr[j] & 3) == DAL_CUR_MATCH_BLOCk) + { + /* Tag current segment as the largest */ + dseg->blk_ptr[j] &= ~1; + } + else if ((dseg->blk_ptr[j] & 3) == DAL_MATCHED_BLOCK) + { + /* Discard previous largest segment */ + dseg->blk_ptr[j] ^= 3; + } + } + } + else + { + /* Discard all blocks in current segment */ + for (j = 0; j < blks; j++) + { + if ((dseg->blk_ptr[j] & 3) == DAL_CUR_MATCH_BLOCk) + { + dseg->blk_ptr[j] &= ~2; + } + } + } + } + } + + return 0; +} + +/* + * Function: _alloc_dma_blocks + */ +static int +_dal_alloc_dma_blocks(dma_segment_t* dseg, int blks) +{ + int i, start; + unsigned long addr; + + if (dseg->blk_cnt + blks > dseg->blk_cnt_max) + { + printk("No more DMA blocks\n"); + return -1; + } + + start = dseg->blk_cnt; + dseg->blk_cnt += blks; + + for (i = start; i < dseg->blk_cnt; i++) + { + addr = __get_free_pages(GFP_ATOMIC, dseg->blk_order); + if (addr) + { + dseg->blk_ptr[i] = addr; + } + else + { + printk("DMA allocation failed\n"); + return -1; + } + } + + return 0; +} + +/* + * Function: _dal_dma_segment_alloc + */ +static dma_segment_t* +_dal_dma_segment_alloc(unsigned int size, unsigned int blk_size) +{ + dma_segment_t* dseg; + int i, blk_ptr_size; + unsigned long page_addr; + struct sysinfo si; + + /* Sanity check */ + if (size == 0 || blk_size == 0) + { + return NULL; + } + + /* Allocate an initialize DMA segment descriptor */ + if ((dseg = kmalloc(sizeof(dma_segment_t), GFP_ATOMIC)) == NULL) + { + return NULL; + } + + memset(dseg, 0, sizeof(dma_segment_t)); + dseg->req_size = size; + dseg->blk_size = PAGE_ALIGN(blk_size); + + while ((PAGE_SIZE << dseg->blk_order) < dseg->blk_size) + { + dseg->blk_order++; + } + + si_meminfo(&si); + dseg->blk_cnt_max = (si.totalram << PAGE_SHIFT) / dseg->blk_size; + blk_ptr_size = dseg->blk_cnt_max * sizeof(unsigned long); + /* Allocate an initialize DMA block pool */ + dseg->blk_ptr = kmalloc(blk_ptr_size, GFP_KERNEL); + if (dseg->blk_ptr == NULL) + { + kfree(dseg); + return NULL; + } + + memset(dseg->blk_ptr, 0, blk_ptr_size); + /* Allocate minimum number of blocks */ + _dal_alloc_dma_blocks(dseg, dseg->req_size / dseg->blk_size); + + /* Allocate more blocks until we have a complete segment */ + do + { + _dal_find_largest_segment(dseg); + if (dseg->seg_size >= dseg->req_size) + { + break; + } + } + while (_dal_alloc_dma_blocks(dseg, 8) == 0); + + /* Reserve all pages in the DMA segment and free unused blocks */ + for (i = 0; i < dseg->blk_cnt; i++) + { + if ((dseg->blk_ptr[i] & 3) == 2) + { + dseg->blk_ptr[i] &= ~3; + + for (page_addr = dseg->blk_ptr[i]; + page_addr < dseg->blk_ptr[i] + dseg->blk_size; + page_addr += PAGE_SIZE) + { + MEM_MAP_RESERVE(VIRT_TO_PAGE((void*)page_addr)); + } + } + else if (dseg->blk_ptr[i]) + { + dseg->blk_ptr[i] &= ~3; + free_pages(dseg->blk_ptr[i], dseg->blk_order); + dseg->blk_ptr[i] = 0; + } + } + + return dseg; +} + +/* + * Function: _dal_dma_segment_free + */ +static void +_dal_dma_segment_free(dma_segment_t* dseg) +{ + int i; + unsigned long page_addr; + + if (dseg->blk_ptr) + { + for (i = 0; i < dseg->blk_cnt; i++) + { + if (dseg->blk_ptr[i]) + { + for (page_addr = dseg->blk_ptr[i]; + page_addr < dseg->blk_ptr[i] + dseg->blk_size; + page_addr += PAGE_SIZE) + { + MEM_MAP_UNRESERVE(VIRT_TO_PAGE(page_addr)); + } + + free_pages(dseg->blk_ptr[i], dseg->blk_order); + } + } + + kfree(dseg->blk_ptr); + kfree(dseg); + } +} + +/* + * Function: -dal_pgalloc + */ +static void* +_dal_pgalloc(unsigned int size) +{ + dma_segment_t* dseg; + unsigned int blk_size; + + blk_size = (size < DMA_BLOCK_SIZE) ? size : DMA_BLOCK_SIZE; + if ((dseg = _dal_dma_segment_alloc(size, blk_size)) == NULL) + { + return NULL; + } + + if (dseg->seg_size < size) + { + /* If we didn't get the full size then forget it */ + printk("Notice: Can not get enough memory for requset!!\n"); + printk("actual size:0x%lx, request size:0x%x\n", dseg->seg_size, size); + //-_dal_dma_segment_free(dseg); + //-return NULL; + } + + list_add(&dseg->list, &_dma_seg); + return (void*)dseg->seg_begin; +} + +/* + * Function: _dal_pgfree + */ +static int +_dal_pgfree(void* ptr) +{ + struct list_head* pos; + + list_for_each(pos, &_dma_seg) + { + dma_segment_t* dseg = list_entry(pos, dma_segment_t, list); + if (ptr == (void*)dseg->seg_begin) + { + list_del(&dseg->list); + _dal_dma_segment_free(dseg); + return 0; + } + } + return -1; +} +#endif +static void +dal_alloc_dma_pool(int lchip, int size) +{ + if (use_high_memory) + { + dma_phy_base[lchip] = virt_to_bus(high_memory); + dma_virt_base[lchip] = ioremap_nocache(dma_phy_base[lchip], size); + } + else + { +#ifdef DMA_MEM_MODE_PLATFORM + dma_virt_base[lchip] = dma_alloc_coherent(&(dal_dev[lchip].pci_dev->dev), dma_mem_size, + &dma_phy_base[lchip], GFP_KERNEL); + + printk(KERN_WARNING "########Using DMA_MEM_MODE_PLATFORM \n"); +#endif + +#ifndef DMA_MEM_MODE_PLATFORM + /* Get DMA memory from kernel */ + dma_virt_base_tmp[lchip] = _dal_pgalloc(size); + dma_phy_base[lchip] = virt_to_bus(dma_virt_base_tmp[lchip]); + dma_virt_base [lchip]= ioremap_nocache(dma_phy_base[lchip], size); +#endif + } +} + +static void +dal_free_dma_pool(int lchip) +{ + int ret = 0; + ret = ret; + if (use_high_memory) + { + iounmap(dma_virt_base[lchip]); + } + else + { +#ifdef DMA_MEM_MODE_PLATFORM + dma_free_coherent(&(dal_dev[lchip].pci_dev->dev), dma_mem_size, + dma_virt_base[lchip], dma_phy_base[lchip]); +#endif + +#ifndef DMA_MEM_MODE_PLATFORM + iounmap(dma_virt_base[lchip]); + ret = _dal_pgfree(dma_virt_base_tmp[lchip]); + if(ret<0) + { + printk("Dma free memory fail !!!!!! \n"); + } +#endif + } +} + +#define _KERNEL_DAL_IO +static int +_dal_pci_read(unsigned char lchip, unsigned int offset, unsigned int* value) +{ + if (!VERIFY_CHIP_INDEX(lchip)) + { + return -1; + } + + *value = *(volatile unsigned int*)(dal_dev[lchip].logic_address + offset); + return 0; +} + +int +dal_create_irq_mapping(unsigned long arg) +{ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 0, 0)) + dal_irq_mapping_t irq_map; + + if (copy_from_user(&irq_map, (void*)arg, sizeof(dal_irq_mapping_t))) + { + return -EFAULT; + } + + irq_map.sw_irq = irq_create_mapping(NULL, irq_map.hw_irq); + if (irq_map.sw_irq == NO_IRQ) + { + printk("IRQ mapping fail !!!!!! \n"); + return -1; + } + + if (copy_to_user((dal_irq_mapping_t*)arg, (void*)&irq_map, sizeof(dal_irq_mapping_t))) + { + return -EFAULT; + } +#endif + return 0; +} + +int +dal_pci_read(unsigned long arg) +{ + dal_chip_parm_t cmdpara_chip; + + if (copy_from_user(&cmdpara_chip, (void*)arg, sizeof(dal_chip_parm_t))) + { + return -EFAULT; + } + + _dal_pci_read((unsigned char)cmdpara_chip.chip_id, (unsigned int)cmdpara_chip.reg_addr, + (unsigned int*)(&(cmdpara_chip.value))); + + if (copy_to_user((dal_chip_parm_t*)arg, (void*)&cmdpara_chip, sizeof(dal_chip_parm_t))) + { + return -EFAULT; + } + + return 0; +} + +static int +_dal_pci_write(unsigned char lchip, unsigned int offset, unsigned int value) +{ + if (!VERIFY_CHIP_INDEX(lchip)) + { + return -1; + } + + *(volatile unsigned int*)(dal_dev[lchip].logic_address + offset) = value; + return 0; +} + +int +dal_pci_write(unsigned long arg) +{ + dal_chip_parm_t cmdpara_chip; + + if (copy_from_user(&cmdpara_chip, (void*)arg, sizeof(dal_chip_parm_t))) + { + return -EFAULT; + } + + _dal_pci_write((unsigned char)cmdpara_chip.chip_id, (unsigned int)cmdpara_chip.reg_addr, + (unsigned int)cmdpara_chip.value); + + return 0; +} + +int +dal_pci_conf_read(unsigned char lchip, unsigned int offset, unsigned int* value) +{ + if (!VERIFY_CHIP_INDEX(lchip)) + { + return -1; + } + + pci_read_config_dword(dal_dev[lchip].pci_dev, offset, value); + return 0; +} + +int +dal_pci_conf_write(unsigned char lchip, unsigned int offset, unsigned int value) +{ + if (!VERIFY_CHIP_INDEX(lchip)) + { + return -1; + } + + pci_write_config_dword(dal_dev[lchip].pci_dev, offset, value); + return 0; +} +int +dal_user_read_pci_conf(unsigned long arg) +{ + dal_pci_cfg_ioctl_t dal_cfg; + + if (copy_from_user(&dal_cfg, (void*)arg, sizeof(dal_pci_cfg_ioctl_t))) + { + return -EFAULT; + } + + if (dal_pci_conf_read(dal_cfg.chip_id, dal_cfg.offset, &dal_cfg.value)) + { + printk("dal_pci_conf_read failed.\n"); + return -EFAULT; + } + + if (copy_to_user((dal_pci_cfg_ioctl_t*)arg, (void*)&dal_cfg, sizeof(dal_pci_cfg_ioctl_t))) + { + return -EFAULT; + } + + return 0; +} + +int +dal_user_write_pci_conf(unsigned long arg) +{ + dal_pci_cfg_ioctl_t dal_cfg; + + if (copy_from_user(&dal_cfg, (void*)arg, sizeof(dal_pci_cfg_ioctl_t))) + { + return -EFAULT; + } + + return dal_pci_conf_write(dal_cfg.chip_id, dal_cfg.offset, dal_cfg.value); +} + +static int +linux_get_device(unsigned long arg) +{ + dal_user_dev_t user_dev; + int chip_id = 0; + + if (copy_from_user(&user_dev, (void*)arg, sizeof(user_dev))) + { + return -EFAULT; + } + + user_dev.chip_num = dal_chip_num; + chip_id = user_dev.chip_id; + + if (chip_id < dal_chip_num) + { + user_dev.phy_base0 = (unsigned int)dal_dev[chip_id].phys_address; + #ifdef PHYS_ADDR_IS_64BIT + user_dev.phy_base1 = (unsigned int)(dal_dev[chip_id].phys_address >> 32); + #else + user_dev.phy_base1 = 0; + #endif + + user_dev.bus_no = dal_dev[chip_id].pci_dev->bus->number; + user_dev.dev_no = dal_dev[chip_id].pci_dev->device; + user_dev.fun_no = dal_dev[chip_id].pci_dev->devfn; + } + + if (copy_to_user((dal_user_dev_t*)arg, (void*)&user_dev, sizeof(user_dev))) + { + return -EFAULT; + } + + return 0; +} + +/* set dal version, copy to user */ +static int +linux_get_dal_version(unsigned long arg) +{ + int dal_ver = VERSION_1DOT2; /* set dal version */ + + if (copy_to_user((int*)arg, (void*)&dal_ver, sizeof(dal_ver))) + { + return -EFAULT; + } + + dal_version = dal_ver; /* up sw */ + + return 0; +} + +static int +linux_get_dma_info(unsigned long arg) +{ + dma_info_t dma_para; + + if (copy_from_user(&dma_para, (void*)arg, sizeof(dma_info_t))) + { + return -EFAULT; + } + + dma_para.phy_base = (unsigned int)dma_phy_base[dma_para.lchip]; + #ifdef PHYS_ADDR_IS_64BIT + dma_para.phy_base_hi = dma_phy_base[dma_para.lchip] >> 32; + #else + dma_para.phy_base_hi = 0; + #endif + dma_para.size = dma_mem_size; + + if (copy_to_user((dma_info_t*)arg, (void*)&dma_para, sizeof(dma_info_t))) + { + return -EFAULT; + } + + return 0; +} + +static int +dal_get_msi_info(unsigned long arg) +{ + dal_msi_info_t msi_para; + unsigned int lchip = 0; + + /* get lchip form user mode */ + if (copy_from_user(&msi_para, (void*)arg, sizeof(dal_msi_info_t))) + { + return -EFAULT; + } + lchip = msi_para.lchip; + + msi_para.irq_base = msi_irq_base[lchip]; + msi_para.irq_num = msi_irq_num[lchip]; + + /* send msi info to user mode */ + if (copy_to_user((dal_msi_info_t*)arg, (void*)&msi_para, sizeof(dal_msi_info_t))) + { + return -EFAULT; + } + + return 0; +} + + +static int +dal_get_intr_info(unsigned long arg) +{ + dal_intr_info_t intr_para; + unsigned int intr_num = 0; + + /* get lchip form user mode */ + if (copy_from_user(&intr_para, (void*)arg, sizeof(dal_intr_info_t))) + { + return -EFAULT; + } + + intr_para.irq_idx = CTC_MAX_INTR_NUM; + for (intr_num=0; intr_num< CTC_MAX_INTR_NUM; intr_num++) + { + if (intr_para.irq == dal_isr[intr_num].irq) + { + intr_para.irq_idx = intr_num; + break; + } + } + + if (CTC_MAX_INTR_NUM == intr_para.irq_idx) + { + printk("Interrupt %d cann't find.\n", intr_para.irq); + } + /* send msi info to user mode */ + if (copy_to_user((dal_intr_info_t*)arg, (void*)&intr_para, sizeof(dal_intr_info_t))) + { + return -EFAULT; + } + + return 0; +} + +static int +dal_cache_inval(unsigned long arg) +{ + dal_dma_cache_info_t intr_para; + + if (copy_from_user(&intr_para, (void*)arg, sizeof(dal_dma_cache_info_t))) + { + return -EFAULT; + } + +#if 0 + dma_cache_wback_inv((unsigned long)intr_para.ptr, intr_para.length); +#endif + +#if 0 + dma_sync_single_for_cpu(NULL, intr_para.ptr, intr_para.length, DMA_BIDIRECTIONAL); +#endif + + dma_cache_sync(NULL, (void*)intr_para.ptr, intr_para.length, DMA_BIDIRECTIONAL); + + return 0; +} + +static int +dal_cache_flush(unsigned long arg) +{ + dal_dma_cache_info_t intr_para; + + if (copy_from_user(&intr_para, (void*)arg, sizeof(dal_dma_cache_info_t))) + { + return -EFAULT; + } + +#if 0 + dma_cache_wback_inv(intr_para.ptr, intr_para.length); +#endif + +#if 0 + dma_sync_single_for_cpu(NULL, intr_para.ptr, intr_para.length, DMA_BIDIRECTIONAL); +#endif + + dma_cache_sync(NULL, (void*)intr_para.ptr, intr_para.length, DMA_BIDIRECTIONAL); + + return 0; +} + +int +linux_dal_probe(struct pci_dev* pdev, const struct pci_device_id* id) +{ + dal_kern_dev_t* dev = NULL; + int bar = 0; + int ret = 0; + unsigned int temp = 0; + unsigned int lchip = 0; + unsigned int chip_id = 0; + + printk(KERN_WARNING "********found dal device*****\n"); + + for (chip_id = 0; chip_id < DAL_MAX_CHIP_NUM; chip_id ++) + { + if (NULL == dal_dev[chip_id].pci_dev) + { + break; + } + } + + if (chip_id >= DAL_MAX_CHIP_NUM) + { + printk("Exceed max local chip num\n"); + return -1; + } + + dev = &dal_dev[chip_id]; + if (NULL == dev) + { + printk("Cannot obtain PCI resources\n"); + } + + lchip = chip_id; + dal_chip_num += 1; + + dev->pci_dev = pdev; + + if (pci_enable_device(pdev) < 0) + { + printk("Cannot enable PCI device: vendor id = %x, device id = %x\n", + pdev->vendor, pdev->device); + } + + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (ret) + { + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret) + { + printk("Could not set PCI DMA Mask\n"); + return ret; + } + } + + if (pci_request_regions(pdev, DAL_NAME) < 0) + { + printk("Cannot obtain PCI resources\n"); + } + + dev->phys_address = pci_resource_start(pdev, bar); + dev->logic_address = (uintptr)ioremap_nocache(dev->phys_address, + pci_resource_len(dev->pci_dev, bar)); + + _dal_pci_read(lchip, 0x48, &temp); + if (((temp >> 8) & 0xffff) == 0x3412) + { + printk("Little endian Cpu detected!!! \n"); + _dal_pci_write(lchip, 0x48, 0xFFFFFFFF); + } + + pci_set_master(pdev); + + /* alloc dma_mem_size for every chip */ + if (dma_mem_size) + { + dal_alloc_dma_pool(lchip, dma_mem_size); + #ifdef PHYS_ADDR_IS_64BIT + + /*add check Dma memory pool cannot cross 4G space*/ + if ((0==(dma_phy_base[lchip]>>32)) && (0!=((dma_phy_base[lchip]+dma_mem_size)>>32))) + { + printk("Dma malloc memory cross 4G space!!!!!! \n"); + return -1; + } + #endif + } + + printk(KERN_WARNING "linux_dal_probe end*****\n"); + + return 0; +} + +void +linux_dal_remove(struct pci_dev* pdev) +{ + unsigned int chip_id = 0; + unsigned int flag = 0; + + for (chip_id = 0; chip_id < DAL_MAX_CHIP_NUM; chip_id ++) + { + if (pdev == dal_dev[chip_id].pci_dev) + { + flag = 1; + break; + } + } + + if (1 == flag) + { + dal_free_dma_pool(chip_id); + pci_release_regions(pdev); + pci_disable_device(pdev); + + dal_dev[chip_id].pci_dev = NULL; + dal_chip_num--; + } + + +} + +#ifdef CONFIG_COMPAT +static long +linux_dal_ioctl(struct file* file, + unsigned int cmd, unsigned long arg) +#else + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 8, 13)) +static int +linux_dal_ioctl(struct file* file, + unsigned int cmd, unsigned long arg) +#else +static int +linux_dal_ioctl(struct inode* inode, struct file* file, + unsigned int cmd, unsigned long arg) +#endif + +#endif +{ + switch (cmd) + { + + case CMD_READ_CHIP: + return dal_pci_read(arg); + + case CMD_WRITE_CHIP: + return dal_pci_write(arg); + + case CMD_GET_DEVICES: + return linux_get_device(arg); + + case CMD_GET_DAL_VERSION: + return linux_get_dal_version(arg); + + case CMD_GET_DMA_INFO: + return linux_get_dma_info(arg); + + case CMD_PCI_CONFIG_READ: + return dal_user_read_pci_conf(arg); + + case CMD_PCI_CONFIG_WRITE: + return dal_user_write_pci_conf(arg); + + case CMD_REG_INTERRUPTS: + return dal_user_interrupt_register(arg); + + case CMD_UNREG_INTERRUPTS: + return dal_user_interrupt_unregister(arg); + + case CMD_EN_INTERRUPTS: + return dal_user_interrupt_set_en(arg); + + case CMD_SET_MSI_CAP: + return dal_set_msi_cap(arg); + + case CMD_GET_MSI_INFO: + return dal_get_msi_info(arg); + + case CMD_IRQ_MAPPING: + return dal_create_irq_mapping(arg); + + case CMD_GET_INTR_INFO: + return dal_get_intr_info(arg); + + case CMD_CACHE_INVAL: + return dal_cache_inval(arg); + + case CMD_CACHE_FLUSH: + return dal_cache_flush(arg); + + default: + break; + } + + return 0; +} + +static unsigned int +linux_dal_poll0(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[0], p); + local_irq_save(flags); + if (poll_intr_trigger[0]) + { + poll_intr_trigger[0] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll1(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[1], p); + local_irq_save(flags); + if (poll_intr_trigger[1]) + { + poll_intr_trigger[1] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll2(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[2], p); + local_irq_save(flags); + if (poll_intr_trigger[2]) + { + poll_intr_trigger[2] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll3(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[3], p); + local_irq_save(flags); + if (poll_intr_trigger[3]) + { + poll_intr_trigger[3] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll4(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[4], p); + local_irq_save(flags); + if (poll_intr_trigger[4]) + { + poll_intr_trigger[4] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll5(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[5], p); + local_irq_save(flags); + if (poll_intr_trigger[5]) + { + poll_intr_trigger[5] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll6(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[6], p); + local_irq_save(flags); + if (poll_intr_trigger[6]) + { + poll_intr_trigger[6] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll7(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[7], p); + local_irq_save(flags); + if (poll_intr_trigger[7]) + { + poll_intr_trigger[7] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static struct pci_driver linux_dal_driver = +{ + .name = DAL_NAME, + .id_table = dal_id_table, + .probe = linux_dal_probe, + .remove = linux_dal_remove, +}; + +static struct file_operations fops = +{ + .owner = THIS_MODULE, +#ifdef CONFIG_COMPAT + .compat_ioctl = linux_dal_ioctl, + .unlocked_ioctl = linux_dal_ioctl, +#else +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)) + .unlocked_ioctl = linux_dal_ioctl, +#else + .ioctl = linux_dal_ioctl, +#endif +#endif +}; + + +static int __init +linux_dal_init(void) +{ + int ret = 0; + + /* Get DMA memory pool size form dal.ok input param, or use default dma_mem_size */ + if (dma_pool_size) + { + if ((dma_pool_size[strlen(dma_pool_size) - 1] & ~0x20) == 'M') + { + dma_mem_size = simple_strtoul(dma_pool_size, NULL, 0); + printk("dma_mem_size: 0x%x \n", dma_mem_size); + + dma_mem_size *= MB_SIZE; + } + else + { + printk("DMA memory pool size must be specified as e.g. dma_pool_size=8M\n"); + } + + if (dma_mem_size & (dma_mem_size - 1)) + { + printk("dma_mem_size must be a power of 2 (1M, 2M, 4M, 8M etc.)\n"); + dma_mem_size = 0; + } + } + + ret = register_chrdev(DAL_DEV_MAJOR, DAL_NAME, &fops); + if (ret < 0) + { + printk(KERN_WARNING "Register linux_dal device, ret %d\n", ret); + return ret; + } + + ret = pci_register_driver(&linux_dal_driver); + if (ret < 0) + { + printk(KERN_WARNING "Register ASIC PCI driver failed, ret %d\n", ret); + return ret; + } + + /* alloc /dev/linux_dal node */ + dal_class = class_create(THIS_MODULE, DAL_NAME); + device_create(dal_class, NULL, MKDEV(DAL_DEV_MAJOR, 0), NULL, DAL_NAME); + + /* init interrupt function */ + intr_handler_fun[0] = intr0_handler; + intr_handler_fun[1] = intr1_handler; + intr_handler_fun[2] = intr2_handler; + intr_handler_fun[3] = intr3_handler; + intr_handler_fun[4] = intr4_handler; + intr_handler_fun[5] = intr5_handler; + intr_handler_fun[6] = intr6_handler; + intr_handler_fun[7] = intr7_handler; + + return ret; +} + +static void __exit +linux_dal_exit(void) +{ + device_destroy(dal_class, MKDEV(DAL_DEV_MAJOR, 0)); + class_destroy(dal_class); + unregister_chrdev(DAL_DEV_MAJOR, "linux_dal"); + pci_unregister_driver(&linux_dal_driver); +} + +module_init(linux_dal_init); +module_exit(linux_dal_exit); + diff --git a/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_kernel.h b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_kernel.h new file mode 100644 index 000000000000..de39af67773b --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_kernel.h @@ -0,0 +1,170 @@ +/** + @file dal_kernel_io.h + + @author Copyright (C) 2012 Centec Networks Inc. All rights reserved. + + @date 2012-4-9 + + @version v2.0 + +*/ +#ifndef _DAL_KERNEL_H_ +#define _DAL_KERNEL_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(CONFIG_RESOURCES_64BIT) || defined(CONFIG_PHYS_ADDR_T_64BIT) +#define PHYS_ADDR_IS_64BIT +#endif + +#ifndef SDK_IN_USERMODE +#ifdef PHYS_ADDR_IS_64BIT +typedef long long intptr; +typedef unsigned long long uintptr; +#else +typedef int intptr; +typedef unsigned int uintptr; +#endif +#endif + +#define DAL_PCI_READ_ADDR 0x0 +#define DAL_PCI_READ_DATA 0xc +#define DAL_PCI_WRITE_ADDR 0x8 +#define DAL_PCI_WRITE_DATA 0x4 +#define DAL_PCI_STATUS 0x10 + +#define DAL_PCI_STATUS_IN_PROCESS 31 +#define DAL_PCI_STATUS_BAD_PARITY 5 +#define DAL_PCI_STATUS_CPU_ACCESS_ERR 4 +#define DAL_PCI_STATUS_READ_CMD 3 +#define DAL_PCI_STATUS_REGISTER_ERR 1 +#define DAL_PCI_STATUS_REGISTER_ACK 0 + +#define DAL_PCI_ACCESS_TIMEOUT 0x64 + +#define DAL_NAME "linux_dal" /* "linux_dal" */ + +#define DAL_DEV_MAJOR 198 + +#define DAL_DEV_INTR_MAJOR_BASE 200 + +#define DAL_DEV_NAME "/dev/" DAL_NAME +#define DAL_ONE_KB 1024 +#define DAL_ONE_MB (1024*1024) +struct dal_chip_parm_s +{ + unsigned int chip_id; /*tmp should be uint8*/ + unsigned int fpga_id; /*tmp add*/ + unsigned int reg_addr; + unsigned int value; +}; +typedef struct dal_chip_parm_s dal_chip_parm_t; + +struct dal_intr_parm_s +{ + unsigned int irq; + unsigned int enable; +}; +typedef struct dal_intr_parm_s dal_intr_parm_t; + +struct dal_irq_mapping_s +{ + unsigned int hw_irq; + unsigned int sw_irq; +}; +typedef struct dal_irq_mapping_s dal_irq_mapping_t; + +struct dal_user_dev_s +{ + unsigned int chip_num; /*output: local chip number*/ + unsigned int chip_id; /*input: local chip id*/ + unsigned int phy_base0; /* low 32bits physical base address */ + unsigned int phy_base1; /* high 32bits physical base address */ + unsigned int bus_no; + unsigned int dev_no; + unsigned int fun_no; + void* virt_base[2]; /* Virtual base address; this must be last member */ +}; +typedef struct dal_user_dev_s dal_user_dev_t; + +struct dma_info_s +{ + unsigned int lchip; + unsigned int phy_base; + unsigned int phy_base_hi; + unsigned int size; + unsigned int* virt_base; +}; +typedef struct dma_info_s dma_info_t; + +struct dal_pci_cfg_ioctl_s +{ + unsigned int chip_id; /* Device ID */ + unsigned int offset; + unsigned int value; +}; +typedef struct dal_pci_cfg_ioctl_s dal_pci_cfg_ioctl_t; + +struct dal_msi_info_s +{ + unsigned int lchip; + unsigned int irq_base; + unsigned int irq_num; +}; +typedef struct dal_msi_info_s dal_msi_info_t; + +struct dal_intr_info_s +{ + unsigned int irq; + unsigned int irq_idx; +}; +typedef struct dal_intr_info_s dal_intr_info_t; + +struct dal_dma_cache_info_s +{ + unsigned long ptr; + unsigned int length; +}; +typedef struct dal_dma_cache_info_s dal_dma_cache_info_t; + +#define CMD_MAGIC 'C' +#define CMD_WRITE_CHIP _IO(CMD_MAGIC, 0) /* for humber ioctrol*/ +#define CMD_READ_CHIP _IO(CMD_MAGIC, 1) /* for humber ioctrol*/ +#define CMD_GET_DEVICES _IO(CMD_MAGIC, 2) +#define CMD_GET_DAL_VERSION _IO(CMD_MAGIC, 3) +#define CMD_PCI_CONFIG_WRITE _IO(CMD_MAGIC, 4) +#define CMD_PCI_CONFIG_READ _IO(CMD_MAGIC, 5) +#define CMD_GET_DMA_INFO _IO(CMD_MAGIC, 6) +#define CMD_REG_INTERRUPTS _IO(CMD_MAGIC, 7) +#define CMD_UNREG_INTERRUPTS _IO(CMD_MAGIC, 8) +#define CMD_EN_INTERRUPTS _IO(CMD_MAGIC, 9) +#define CMD_I2C_READ _IO(CMD_MAGIC, 10) +#define CMD_I2C_WRITE _IO(CMD_MAGIC, 11) +#define CMD_GET_MSI_INFO _IO(CMD_MAGIC, 12) +#define CMD_SET_MSI_CAP _IO(CMD_MAGIC, 13) +#define CMD_IRQ_MAPPING _IO(CMD_MAGIC, 14) +#define CMD_GET_INTR_INFO _IO(CMD_MAGIC, 15) +#define CMD_CACHE_INVAL _IO(CMD_MAGIC, 16) +#define CMD_CACHE_FLUSH _IO(CMD_MAGIC, 17) + +enum dal_version_e +{ + VERSION_MIN, + VERSION_1DOT0, + VERSION_1DOT1, + VERSION_1DOT2, + + VERSION_MAX +}; +typedef enum dal_version_e dal_version_t; + +/* We try to assemble a contiguous segment from chunks of this size */ +#define DMA_BLOCK_SIZE (512 * DAL_ONE_KB) + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_mpool.c b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_mpool.c new file mode 100644 index 000000000000..82d3b7a917a8 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_mpool.c @@ -0,0 +1,343 @@ + +#include "dal_mpool.h" + +#ifdef __KERNEL__ +#include +#include + +#define DAL_MALLOC(x) kmalloc(x, GFP_ATOMIC) +#define DAL_FREE(x) kfree(x) + +static spinlock_t dal_mpool_lock; +#define MPOOL_LOCK_INIT() spin_lock_init(&dal_mpool_lock) +#define MPOOL_LOCK() unsigned long flags; spin_lock_irqsave(&dal_mpool_lock, flags) +#define MPOOL_UNLOCK() spin_unlock_irqrestore(&dal_mpool_lock, flags) +#define DAL_PRINT(fmt,arg...) printk(fmt,##arg) +#else /* !__KERNEL__*/ + +#include +#include "sal.h" +#define DAL_MALLOC(x) malloc(x) +#define DAL_FREE(x) free(x) +static sal_mutex_t* dal_mpool_lock; +#define MPOOL_LOCK_INIT() sal_mutex_create(&dal_mpool_lock) +#define MPOOL_LOCK() sal_mutex_lock(dal_mpool_lock) +#define MPOOL_UNLOCK() sal_mutex_unlock(dal_mpool_lock) +#define DAL_PRINT(fmt,arg...) sal_printf(fmt,##arg) + +#endif /* __KERNEL__ */ + +dal_mpool_mem_t* g_free_block_ptr = NULL; + +/* System cache line size */ +#ifndef DAL_CACHE_LINE_BYTES +#define DAL_CACHE_LINE_BYTES 256 +#endif + +static dal_mpool_mem_t* p_desc_pool = NULL; +static dal_mpool_mem_t* p_data_pool = NULL; + +int +dal_mpool_init(void) +{ + MPOOL_LOCK_INIT(); + return 0; +} + +dal_mpool_mem_t* +_dal_mpool_create(void* base, int size, int type) +{ + dal_mpool_mem_t* head = NULL; + dal_mpool_mem_t* tail = NULL; + + head = (dal_mpool_mem_t*)DAL_MALLOC(sizeof(dal_mpool_mem_t)); + if (head == NULL) + { + return NULL; + } + + tail = (dal_mpool_mem_t*)DAL_MALLOC(sizeof(dal_mpool_mem_t)); + if (tail == NULL) + { + DAL_FREE(head); + return NULL; + } + + head->size = tail->size = 0; + head->type = type; + head->address = base; + tail->address = head->address + size; + head->next = tail; + tail->next = NULL; + + return head; +} + +dal_mpool_mem_t* +dal_mpool_create(void* base, int size) +{ + dal_mpool_mem_t* head = NULL; + int mod = (int)(((unsigned long)base) & (DAL_CACHE_LINE_BYTES - 1)); + + MPOOL_LOCK(); + + if (mod) + { + base = (char*)base + (DAL_CACHE_LINE_BYTES - mod); + size -= (DAL_CACHE_LINE_BYTES - mod); + } + + size &= ~(DAL_CACHE_LINE_BYTES - 1); + + /* init for common linkptr, only used for GB */ + head = _dal_mpool_create(base, size, DAL_MPOOL_TYPE_USELESS); + if (NULL == head) + { + MPOOL_UNLOCK(); + return NULL; + } + + /* init for desc linkptr */ + p_desc_pool = _dal_mpool_create(base, DAL_MPOOL_MAX_DESX_SIZE, DAL_MPOOL_TYPE_DESC); + if (NULL == p_desc_pool) + { + MPOOL_UNLOCK(); + DAL_FREE(head->next); + DAL_FREE(head); + return NULL; + } + + /* init for data linkptr */ + p_data_pool = _dal_mpool_create(((char*)base+DAL_MPOOL_MAX_DESX_SIZE), (size - DAL_MPOOL_MAX_DESX_SIZE), DAL_MPOOL_TYPE_DATA); + if (NULL == p_data_pool) + { + MPOOL_UNLOCK(); + DAL_FREE(head->next); + DAL_FREE(head); + DAL_FREE(p_desc_pool->next); + DAL_FREE(p_desc_pool); + return NULL; + } + + MPOOL_UNLOCK(); + + return head; +} + +dal_mpool_mem_t* +_dal_mpool_alloc_comon(dal_mpool_mem_t* ptr, int size, int type) +{ + dal_mpool_mem_t* new_ptr = NULL; + + while (ptr && ptr->next) + { + if (ptr->next->address - (ptr->address + ptr->size) >= size) + { + break; + } + + ptr = ptr->next; + } + + if (!(ptr && ptr->next)) + { + return NULL; + } + + new_ptr = DAL_MALLOC(sizeof(dal_mpool_mem_t)); + if (!new_ptr) + { + return NULL; + } + + new_ptr->type = type; + new_ptr->address = ptr->address + ptr->size; + new_ptr->size = size; + new_ptr->next = ptr->next; + ptr->next = new_ptr; + + return new_ptr; +} + +void* +dal_mpool_alloc(dal_mpool_mem_t* pool, int size, int type) +{ + dal_mpool_mem_t* ptr = NULL; + dal_mpool_mem_t* new_ptr = NULL; + int mod; + + MPOOL_LOCK(); + + mod = size & (DAL_CACHE_LINE_BYTES - 1); + if (mod != 0) + { + size += (DAL_CACHE_LINE_BYTES - mod); + } + + switch(type) + { + case DAL_MPOOL_TYPE_USELESS: + ptr = pool; + new_ptr = _dal_mpool_alloc_comon(ptr, size, type); + if (NULL == new_ptr) + { + MPOOL_UNLOCK(); + return NULL; + } + break; + case DAL_MPOOL_TYPE_DESC: + ptr = p_desc_pool; + new_ptr = _dal_mpool_alloc_comon(ptr, size, type); + if (NULL == new_ptr) + { + MPOOL_UNLOCK(); + return NULL; + } + break; + case DAL_MPOOL_TYPE_DATA: + ptr = p_data_pool; + new_ptr = _dal_mpool_alloc_comon(ptr, size, type); + if (NULL == new_ptr) + { + MPOOL_UNLOCK(); + return NULL; + } + break; + default: + MPOOL_UNLOCK(); + return NULL; + break; + } + + MPOOL_UNLOCK(); + + return new_ptr->address; +} + +void +_dal_mpool_free(dal_mpool_mem_t* ptr, void* addr, int type) +{ + unsigned char* address = (unsigned char*)addr; + dal_mpool_mem_t* prev = NULL; + + while (ptr && ptr->next) + { + if (ptr->next->address == address) + { + break; + } + + ptr = ptr->next; + } + + if (ptr && ptr->next) + { + prev = ptr; + ptr = ptr->next; + prev->next = ptr->next; + DAL_FREE(ptr); + } + + return; +} + +void +dal_mpool_free(dal_mpool_mem_t* pool, void* addr) +{ + dal_mpool_mem_t* ptr = pool; + + MPOOL_LOCK(); + + switch(pool->type) + { + case DAL_MPOOL_TYPE_USELESS: + ptr = pool; + _dal_mpool_free(ptr, addr, DAL_MPOOL_TYPE_USELESS); + break; + case DAL_MPOOL_TYPE_DESC: + ptr = p_desc_pool; + _dal_mpool_free(ptr, addr, DAL_MPOOL_TYPE_DESC); + break; + case DAL_MPOOL_TYPE_DATA: + ptr = p_data_pool; + _dal_mpool_free(ptr, addr, DAL_MPOOL_TYPE_DATA); + break; + default: + break; + } + + MPOOL_UNLOCK(); + return; +} + +int +dal_mpool_destroy(dal_mpool_mem_t* pool) +{ + dal_mpool_mem_t* ptr, * next; + + MPOOL_LOCK(); + + for (ptr = pool; ptr; ptr = next) + { + next = ptr->next; + DAL_FREE(ptr); + } + + for (ptr = p_desc_pool; ptr; ptr = next) + { + next = ptr->next; + DAL_FREE(ptr); + } + + for (ptr = p_data_pool; ptr; ptr = next) + { + next = ptr->next; + DAL_FREE(ptr); + } + + MPOOL_UNLOCK(); + + return 0; +} + +int +dal_mpool_usage(dal_mpool_mem_t* pool, int type) +{ + int usage = 0; + dal_mpool_mem_t* ptr; + + MPOOL_LOCK(); + + for (ptr = pool; ptr; ptr = ptr->next) + { + if (ptr->type == type || ptr->type == -1) + { + usage += ptr->size; + } + } + + MPOOL_UNLOCK(); + + return usage; +} + +int +dal_mpool_debug(dal_mpool_mem_t* pool) +{ + dal_mpool_mem_t* ptr; + int index = 0; + + MPOOL_LOCK(); + + for (ptr = pool; ptr; ptr = ptr->next) + { +// DAL_PRINT("%2dst mpool block: address=0x%8x, size=0x%x \n", index, (unsigned int)ptr->address, ptr->size); + DAL_PRINT("%2dst mpool block: address=%p, size=0x%x \n", index, ptr->address, ptr->size); // note + index++; + } + + MPOOL_UNLOCK(); + + return 0; +} + diff --git a/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_mpool.h b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_mpool.h new file mode 100644 index 000000000000..a1fa37d05f82 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x2q4z/modules/dal_mpool.h @@ -0,0 +1,71 @@ +/** + @file dal_mpool.h + + @author Copyright (C) 2011 Centec Networks Inc. All rights reserved. + + @date 2012-5-10 + + @version v2.0 + + This file contains the dma memory init, allocation and free APIs +*/ + +#ifndef _DMA_MPOOL_H +#define _DMA_MPOOL_H +#ifdef __cplusplus +extern "C" { +#endif + +#define DAL_MPOOL_MAX_DESX_SIZE (1024*1024) + +enum dal_mpool_type_e +{ + DAL_MPOOL_TYPE_USELESS, /* just compatible with GB */ + DAL_MPOOL_TYPE_DESC, /* dma mpool op for desc */ + DAL_MPOOL_TYPE_DATA /* dma mpool op for data */ +}; +typedef enum dal_mpool_type_e dal_mpool_type_t; + +struct dal_mpool_mem_s +{ + unsigned char* address; + int size; + int type; + struct dal_mpool_mem_s* next; +}; +typedef struct dal_mpool_mem_s dal_mpool_mem_t; + +/** + @brief This function is to alloc dma memory + + @param[in] size size of memory + + @return NULL + +*/ +extern int +dal_mpool_init(void); + +extern dal_mpool_mem_t* +dal_mpool_create(void* base_ptr, int size); + +extern void* +dal_mpool_alloc(dal_mpool_mem_t* pool, int size, int type); + +extern void +dal_mpool_free(dal_mpool_mem_t* pool, void* addr); + +extern int +dal_mpool_destroy(dal_mpool_mem_t* pool); + +extern int +dal_mpool_usage(dal_mpool_mem_t* pool, int type); + +extern int +dal_mpool_debug(dal_mpool_mem_t* pool); +#ifdef __cplusplus +} +#endif + +#endif /* !_DMA_MPOOL_H */ + diff --git a/platform/centec/sonic-platform-modules-e582/48x2q4z/scripts/48x2q4z_platform.sh b/platform/centec/sonic-platform-modules-e582/48x2q4z/scripts/48x2q4z_platform.sh new file mode 100755 index 000000000000..2caae94f03e7 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x2q4z/scripts/48x2q4z_platform.sh @@ -0,0 +1,36 @@ +#!/bin/bash + +#platform init script for centec e582-48x2q4z + +init_devnum() { + found=0 + for devnum in 0 1; do + devname=`cat /sys/bus/i2c/devices/i2c-${devnum}/name` + # I801 adapter can be at either dffd0000 or dfff0000 + if [[ $devname == 'SMBus I801 adapter at '* ]]; then + found=1 + break + fi + done + + [ $found -eq 0 ] && echo "cannot find I801" && exit 1 +} + +init_devnum + +if [ "$1" == "init" ]; then + depmod -a + modprobe i2c-dev + modprobe i2c-mux-pca954x force_deselect_on_exit=1 + modprobe centec_e582_48x2q4z_platform + modprobe dal + modprobe centec_at24c64 +elif [ "$1" == "deinit" ]; then + modprobe -r centec_at24c64 + modprobe -r dal + modprobe -r centec_e582_48x2q4z_platform + modprobe -r i2c-mux-pca954x + modprobe -r i2c-dev +else + echo "e582-48x2q4z_platform : Invalid option !" +fi diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/cfg/48x6q-modules.conf b/platform/centec/sonic-platform-modules-e582/48x6q/cfg/48x6q-modules.conf new file mode 100644 index 000000000000..7a7881c8c0d3 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/cfg/48x6q-modules.conf @@ -0,0 +1,14 @@ +# /etc/modules: kernel modules to load at boot time. +# +# This file contains the names of kernel modules that should be loaded +# at boot time, one per line. Lines beginning with "#" are ignored. + +i2c-i801 +i2c-dev +i2c-mux +i2c-smbus + +i2c-mux-pca954x +lm77 +adt7470 +tun diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/cfg/config_db.json b/platform/centec/sonic-platform-modules-e582/48x6q/cfg/config_db.json new file mode 100644 index 000000000000..c75eb1284f66 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/cfg/config_db.json @@ -0,0 +1,303 @@ +{ + "DEVICE_METADATA": { + "localhost": { + "bgp_asn": 65100, + "deployment_id": null, + "hostname": "switch1", + "type": "LeafRouter", + "hwsku": "E582-48x6q" + + } + }, + "BGP_PEER_RANGE": {}, + "VLAN": {}, + "PORT": { + "Ethernet1": { + "alias": "Ethernet1", + "lanes": "4", + "speed": "1000" + }, + "Ethernet2": { + "alias": "Ethernet2", + "lanes": "5", + "speed": "1000" + }, + "Ethernet3": { + "alias": "Ethernet3", + "lanes": "6", + "speed": "1000" + }, + "Ethernet4": { + "alias": "Ethernet4", + "lanes": "8", + "speed": "1000" + }, + "Ethernet5": { + "alias": "Ethernet5", + "lanes": "9", + "speed": "1000" + }, + "Ethernet6": { + "alias": "Ethernet6", + "lanes": "10", + "speed": "1000" + }, + "Ethernet7": { + "alias": "Ethernet7", + "lanes": "12", + "speed": "1000" + }, + "Ethernet8": { + "alias": "Ethernet8", + "lanes": "13", + "speed": "1000" + }, + "Ethernet9": { + "alias": "Ethernet9", + "lanes": "14", + "speed": "1000" + }, + "Ethernet10": { + "alias": "Ethernet10", + "lanes": "16", + "speed": "1000" + }, + "Ethernet11": { + "alias": "Ethernet11", + "lanes": "17", + "speed": "1000" + }, + "Ethernet12": { + "alias": "Ethernet12", + "lanes": "18", + "speed": "1000" + }, + "Ethernet13": { + "alias": "Ethernet13", + "lanes": "20", + "speed": "10000" + }, + "Ethernet14": { + "alias": "Ethernet14", + "lanes": "21", + "speed": "10000" + }, + "Ethernet15": { + "alias": "Ethernet15", + "lanes": "22", + "speed": "10000" + }, + "Ethernet16": { + "alias": "Ethernet16", + "lanes": "24", + "speed": "10000" + }, + "Ethernet17": { + "alias": "Ethernet17", + "lanes": "25", + "speed": "10000" + }, + "Ethernet18": { + "alias": "Ethernet18", + "lanes": "26", + "speed": "10000" + }, + "Ethernet19": { + "alias": "Ethernet19", + "lanes": "28", + "speed": "10000" + }, + "Ethernet20": { + "alias": "Ethernet20", + "lanes": "30", + "speed": "10000" + }, + "Ethernet21": { + "alias": "Ethernet21", + "lanes": "31", + "speed": "10000" + }, + "Ethernet22": { + "alias": "Ethernet22", + "lanes": "32", + "speed": "10000" + }, + "Ethernet23": { + "alias": "Ethernet23", + "lanes": "34", + "speed": "10000" + }, + "Ethernet24": { + "alias": "Ethernet24", + "lanes": "35", + "speed": "10000" + }, + "Ethernet25": { + "alias": "Ethernet25", + "lanes": "40", + "speed": "10000" + }, + "Ethernet26": { + "alias": "Ethernet26", + "lanes": "41", + "speed": "10000" + }, + "Ethernet27": { + "alias": "Ethernet27", + "lanes": "43", + "speed": "10000" + }, + "Ethernet28": { + "alias": "Ethernet28", + "lanes": "36", + "speed": "10000" + }, + "Ethernet29": { + "alias": "Ethernet29", + "lanes": "37", + "speed": "10000" + }, + "Ethernet30": { + "alias": "Ethernet30", + "lanes": "39", + "speed": "10000" + }, + "Ethernet31": { + "alias": "Ethernet31", + "lanes": "44", + "speed": "10000" + }, + "Ethernet32": { + "alias": "Ethernet32", + "lanes": "45", + "speed": "10000" + }, + "Ethernet33": { + "alias": "Ethernet33", + "lanes": "46", + "speed": "10000" + }, + "Ethernet34": { + "alias": "Ethernet34", + "lanes": "47", + "speed": "10000" + }, + "Ethernet35": { + "alias": "Ethernet35", + "lanes": "80", + "speed": "10000" + }, + "Ethernet36": { + "alias": "Ethernet36", + "lanes": "81", + "speed": "10000" + }, + "Ethernet37": { + "alias": "Ethernet37", + "lanes": "82", + "speed": "10000" + }, + "Ethernet38": { + "alias": "Ethernet38", + "lanes": "88", + "speed": "10000" + }, + "Ethernet39": { + "alias": "Ethernet39", + "lanes": "89", + "speed": "10000" + }, + "Ethernet40": { + "alias": "Ethernet40", + "lanes": "90", + "speed": "10000" + }, + "Ethernet41": { + "alias": "Ethernet41", + "lanes": "84", + "speed": "10000" + }, + "Ethernet42": { + "alias": "Ethernet42", + "lanes": "85", + "speed": "10000" + }, + "Ethernet43": { + "alias": "Ethernet43", + "lanes": "86", + "speed": "10000" + }, + "Ethernet44": { + "alias": "Ethernet44", + "lanes": "87", + "speed": "10000" + }, + "Ethernet45": { + "alias": "Ethernet45", + "lanes": "92", + "speed": "10000" + }, + "Ethernet46": { + "alias": "Ethernet46", + "lanes": "93", + "speed": "10000" + }, + "Ethernet47": { + "alias": "Ethernet47", + "lanes": "94", + "speed": "10000" + }, + "Ethernet48": { + "alias": "Ethernet48", + "lanes": "95", + "speed": "10000" + }, + "Ethernet49": { + "alias": "Ethernet49", + "lanes": "52,53,54,55", + "speed": "40000" + }, + "Ethernet50": { + "alias": "Ethernet50", + "lanes": "56,57,58,59", + "speed": "40000" + }, + "Ethernet51": { + "alias": "Ethernet51", + "lanes": "60,61,62,63", + "speed": "40000" + }, + "Ethernet52": { + "alias": "Ethernet52", + "lanes": "68,69,70,71", + "speed": "40000" + }, + "Ethernet53": { + "alias": "Ethernet53", + "lanes": "72,73,74,75", + "speed": "40000" + }, + "Ethernet54": { + "alias": "Ethernet54", + "lanes": "76,77,78,79", + "speed": "40000" + } + }, + "SYSLOG_SERVER": {}, + "VLAN_INTERFACE": {}, + "PORTCHANNEL_INTERFACE": {}, + "PORTCHANNEL": {}, + "MGMT_INTERFACE": {}, + "DHCP_SERVER": {}, + "LOOPBACK_INTERFACE": { + "Loopback0|127.0.0.1/8": {} + }, + "ACL_TABLE": {}, + "INTERFACE": { + "Ethernet1|192.168.1.1/24": {}, + "Ethernet2|192.168.2.1/24": {}, + "Ethernet3|192.168.3.1/24": {}, + "Ethernet4|192.168.4.1/24": {} + } +} + diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/cfg/config_db_l2l3.json b/platform/centec/sonic-platform-modules-e582/48x6q/cfg/config_db_l2l3.json new file mode 100644 index 000000000000..e9d9a3bb5e4b --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/cfg/config_db_l2l3.json @@ -0,0 +1,610 @@ +{ + "QUEUE": { + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54|0-2": { + "wred_profile": "[WRED_PROFILE|AZURE_LOSSY]" + }, + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54|3-4": { + "wred_profile": "[WRED_PROFILE|AZURE_LOSSLESS]", + "scheduler": "[SCHEDULER|scheduler.0]" + }, + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54|5-7": { + "wred_profile": "[WRED_PROFILE|AZURE_LOSSY]" + } + }, + "WRED_PROFILE": { + "AZURE_LOSSLESS": { + "red_max_threshold": "32760", + "yellow_max_threshold": "32760", + "green_min_threshold": "4095", + "red_min_threshold": "4095", + "yellow_min_threshold": "4095", + "green_max_threshold": "32760", + "wred_yellow_enable": "true", + "wred_green_enable": "true" + }, + "AZURE_LOSSY": { + "red_max_threshold": "32760", + "yellow_max_threshold": "32760", + "green_min_threshold": "4095", + "red_min_threshold": "4095", + "yellow_min_threshold": "4095", + "green_max_threshold": "32760", + "wred_yellow_enable": "true", + "wred_green_enable": "true" + } + }, + "DSCP_TO_TC_MAP": { + "AZURE": { + "56": "7", + "54": "6", + "28": "3", + "48": "6", + "29": "3", + "60": "7", + "61": "7", + "62": "7", + "63": "7", + "49": "6", + "34": "4", + "24": "3", + "25": "3", + "26": "3", + "27": "3", + "20": "2", + "21": "2", + "22": "2", + "23": "2", + "46": "5", + "47": "5", + "44": "5", + "45": "5", + "42": "5", + "43": "5", + "40": "5", + "41": "5", + "1": "0", + "0": "0", + "3": "0", + "2": "0", + "5": "0", + "4": "0", + "7": "0", + "6": "0", + "9": "1", + "8": "1", + "35": "4", + "13": "1", + "12": "1", + "15": "1", + "58": "7", + "11": "1", + "10": "1", + "39": "4", + "38": "4", + "59": "7", + "14": "1", + "17": "2", + "16": "2", + "19": "2", + "18": "2", + "31": "3", + "30": "3", + "51": "6", + "36": "4", + "53": "6", + "52": "6", + "33": "4", + "55": "6", + "37": "4", + "32": "4", + "57": "7", + "50": "6" + } + }, + "DEVICE_METADATA": { + "localhost": { + "hwsku": "E582-48x6q", + "hostname": "switch1", + "bgp_asn": "None", + "deployment_id": "None", + "type": "LeafRouter" + } + }, + "PORT": { + "Ethernet1": { + "alias": "Ethernet1", + "lanes": "4", + "speed": "1000" + }, + "Ethernet2": { + "alias": "Ethernet2", + "lanes": "5", + "speed": "1000" + }, + "Ethernet3": { + "alias": "Ethernet3", + "lanes": "6", + "speed": "1000" + }, + "Ethernet4": { + "alias": "Ethernet4", + "lanes": "8", + "speed": "1000" + }, + "Ethernet5": { + "alias": "Ethernet5", + "lanes": "9", + "speed": "1000" + }, + "Ethernet6": { + "alias": "Ethernet6", + "lanes": "10", + "speed": "1000" + }, + "Ethernet7": { + "alias": "Ethernet7", + "lanes": "12", + "speed": "1000" + }, + "Ethernet8": { + "alias": "Ethernet8", + "lanes": "13", + "speed": "1000" + }, + "Ethernet9": { + "alias": "Ethernet9", + "lanes": "14", + "speed": "1000" + }, + "Ethernet10": { + "alias": "Ethernet10", + "lanes": "16", + "speed": "1000" + }, + "Ethernet11": { + "alias": "Ethernet11", + "lanes": "17", + "speed": "1000" + }, + "Ethernet12": { + "alias": "Ethernet12", + "lanes": "18", + "speed": "1000" + }, + "Ethernet13": { + "alias": "Ethernet13", + "lanes": "20", + "speed": "10000" + }, + "Ethernet14": { + "alias": "Ethernet14", + "lanes": "21", + "speed": "10000" + }, + "Ethernet15": { + "alias": "Ethernet15", + "lanes": "22", + "speed": "10000" + }, + "Ethernet16": { + "alias": "Ethernet16", + "lanes": "24", + "speed": "10000" + }, + "Ethernet17": { + "alias": "Ethernet17", + "lanes": "25", + "speed": "10000" + }, + "Ethernet18": { + "alias": "Ethernet18", + "lanes": "26", + "speed": "10000" + }, + "Ethernet19": { + "alias": "Ethernet19", + "lanes": "28", + "speed": "10000" + }, + "Ethernet20": { + "alias": "Ethernet20", + "lanes": "30", + "speed": "10000" + }, + "Ethernet21": { + "alias": "Ethernet21", + "lanes": "31", + "speed": "10000" + }, + "Ethernet22": { + "alias": "Ethernet22", + "lanes": "32", + "speed": "10000" + }, + "Ethernet23": { + "alias": "Ethernet23", + "lanes": "34", + "speed": "10000" + }, + "Ethernet24": { + "alias": "Ethernet24", + "lanes": "35", + "speed": "10000" + }, + "Ethernet25": { + "alias": "Ethernet25", + "lanes": "40", + "speed": "10000" + }, + "Ethernet26": { + "alias": "Ethernet26", + "lanes": "41", + "speed": "10000" + }, + "Ethernet27": { + "alias": "Ethernet27", + "lanes": "43", + "speed": "10000" + }, + "Ethernet28": { + "alias": "Ethernet28", + "lanes": "36", + "speed": "10000" + }, + "Ethernet29": { + "alias": "Ethernet29", + "lanes": "37", + "speed": "10000" + }, + "Ethernet30": { + "alias": "Ethernet30", + "lanes": "39", + "speed": "10000" + }, + "Ethernet31": { + "alias": "Ethernet31", + "lanes": "44", + "speed": "10000" + }, + "Ethernet32": { + "alias": "Ethernet32", + "lanes": "45", + "speed": "10000" + }, + "Ethernet33": { + "alias": "Ethernet33", + "lanes": "46", + "speed": "10000" + }, + "Ethernet34": { + "alias": "Ethernet34", + "lanes": "47", + "speed": "10000" + }, + "Ethernet35": { + "alias": "Ethernet35", + "lanes": "80", + "speed": "10000" + }, + "Ethernet36": { + "alias": "Ethernet36", + "lanes": "81", + "speed": "10000" + }, + "Ethernet37": { + "alias": "Ethernet37", + "lanes": "82", + "speed": "10000" + }, + "Ethernet38": { + "alias": "Ethernet38", + "lanes": "88", + "speed": "10000" + }, + "Ethernet39": { + "alias": "Ethernet39", + "lanes": "89", + "speed": "10000" + }, + "Ethernet40": { + "alias": "Ethernet40", + "lanes": "90", + "speed": "10000" + }, + "Ethernet41": { + "alias": "Ethernet41", + "lanes": "84", + "speed": "10000" + }, + "Ethernet42": { + "alias": "Ethernet42", + "lanes": "85", + "speed": "10000" + }, + "Ethernet43": { + "alias": "Ethernet43", + "lanes": "86", + "speed": "10000" + }, + "Ethernet44": { + "alias": "Ethernet44", + "lanes": "87", + "speed": "10000" + }, + "Ethernet45": { + "alias": "Ethernet45", + "lanes": "92", + "speed": "10000" + }, + "Ethernet46": { + "alias": "Ethernet46", + "lanes": "93", + "speed": "10000" + }, + "Ethernet47": { + "alias": "Ethernet47", + "lanes": "94", + "speed": "10000" + }, + "Ethernet48": { + "alias": "Ethernet48", + "lanes": "95", + "speed": "10000" + }, + "Ethernet49": { + "alias": "Ethernet49", + "lanes": "52,53,54,55", + "speed": "40000" + }, + "Ethernet50": { + "alias": "Ethernet50", + "lanes": "56,57,58,59", + "speed": "40000" + }, + "Ethernet51": { + "alias": "Ethernet51", + "lanes": "60,61,62,63", + "speed": "40000" + }, + "Ethernet52": { + "alias": "Ethernet52", + "lanes": "68,69,70,71", + "speed": "40000" + }, + "Ethernet53": { + "alias": "Ethernet53", + "lanes": "72,73,74,75", + "speed": "40000" + }, + "Ethernet54": { + "alias": "Ethernet54", + "lanes": "76,77,78,79", + "speed": "40000" + } + }, + "PORT_QOS_MAP": { + "Ethernet1,Ethernet2,Ethernet3,Ethernet4,Ethernet5,Ethernet6,Ethernet7,Ethernet8,Ethernet9,Ethernet10,Ethernet11,Ethernet12,Ethernet13,Ethernet14,Ethernet15,Ethernet16,Ethernet17,Ethernet18,Ethernet19,Ethernet20,Ethernet21,Ethernet22,Ethernet23,Ethernet24,Ethernet25,Ethernet26,Ethernet27,Ethernet28,Ethernet29,Ethernet30,Ethernet31,Ethernet32,Ethernet33,Ethernet34,Ethernet35,Ethernet36,Ethernet37,Ethernet38,Ethernet39,Ethernet40,Ethernet41,Ethernet42,Ethernet43,Ethernet44,Ethernet45,Ethernet46,Ethernet47,Ethernet48,Ethernet49,Ethernet50,Ethernet51,Ethernet52,Ethernet53,Ethernet54": { + "pfc_enable": "3,4", + "dscp_to_tc_map": "[DSCP_TO_TC_MAP|AZURE]" + } + }, + "SCHEDULER": { + "scheduler.0": { + "type": "DWRR", + "weight": "25" + }, + "scheduler.1": { + "type": "DWRR", + "weight": "30" + }, + "scheduler.2": { + "type": "DWRR", + "weight": "20" + } + }, + "VLAN": { + "Vlan500": { + "dhcp_servers": [ + "192.168.5.1", + "192.168.5.2", + "192.168.5.3", + "192.168.5.4" + ], + "members": [ + "Ethernet5", + "Ethernet6", + "Ethernet7", + "Ethernet8" + ], + "vlanid": "500" + }, + "Vlan600": { + "dhcp_servers": [ + "192.168.6.1", + "192.168.6.2", + "192.168.6.3", + "192.168.6.4" + ], + "members": [ + "Ethernet5", + "Ethernet6" + ], + "vlanid": "600" + }, + "Vlan700": { + "dhcp_servers": [ + "192.168.7.1", + "192.168.7.2", + "192.168.7.3", + "192.168.7.4" + ], + "members": [ + "Ethernet5", + "Ethernet7" + ], + "vlanid": "700" + }, + "Vlan800": { + "dhcp_servers": [ + "192.168.8.1", + "192.168.8.2", + "192.168.8.3", + "192.168.8.4" + ], + "members": [ + "Ethernet5", + "Ethernet8" + ], + "vlanid": "800" + } + }, + "VLAN_MEMBER": { + "Vlan500|Ethernet5": { + "tagging_mode": "tagged" + }, + "Vlan500|Ethernet6": { + "tagging_mode": "untagged" + }, + "Vlan500|Ethernet7": { + "tagging_mode": "untagged" + }, + "Vlan500|Ethernet8": { + "tagging_mode": "untagged" + }, + "Vlan600|Ethernet5": { + "tagging_mode": "tagged" + }, + "Vlan600|Ethernet6": { + "tagging_mode": "tagged" + }, + "Vlan700|Ethernet5": { + "tagging_mode": "tagged" + }, + "Vlan700|Ethernet7": { + "tagging_mode": "tagged" + }, + "Vlan800|Ethernet5": { + "tagging_mode": "tagged" + }, + "Vlan800|Ethernet8": { + "tagging_mode": "tagged" + } + }, + "INTERFACE": { + "Ethernet1|192.168.1.1/24": {}, + "Ethernet2|192.168.2.1/24": {}, + "Ethernet3|192.168.3.1/24": {}, + "Ethernet4|192.168.4.1/24": {} + }, + "VLAN_INTERFACE": { + "Vlan500|192.168.5.1/24": {}, + "Vlan600|192.168.6.1/24": {}, + "Vlan700|192.168.7.1/24": {}, + "Vlan800|192.168.8.1/24": {} + }, + "LOOPBACK_INTERFACE": { + "Loopback0|127.0.0.1/8": {} + }, + "CABLE_LENGTH": { + "AZURE": { + "Ethernet8": "40m", + "Ethernet9": "40m", + "Ethernet2": "40m", + "Ethernet3": "40m", + "Ethernet1": "40m", + "Ethernet6": "40m", + "Ethernet7": "40m", + "Ethernet4": "40m", + "Ethernet5": "40m", + "Ethernet22": "40m", + "Ethernet50": "40m", + "Ethernet51": "40m", + "Ethernet52": "40m", + "Ethernet53": "40m", + "Ethernet54": "40m", + "Ethernet38": "40m", + "Ethernet39": "40m", + "Ethernet18": "40m", + "Ethernet19": "40m", + "Ethernet14": "40m", + "Ethernet15": "40m", + "Ethernet16": "40m", + "Ethernet17": "40m", + "Ethernet10": "40m", + "Ethernet11": "40m", + "Ethernet12": "40m", + "Ethernet35": "40m", + "Ethernet37": "40m", + "Ethernet32": "40m", + "Ethernet33": "40m", + "Ethernet30": "40m", + "Ethernet31": "40m", + "Ethernet49": "40m", + "Ethernet48": "40m", + "Ethernet47": "40m", + "Ethernet36": "40m", + "Ethernet45": "40m", + "Ethernet44": "40m", + "Ethernet43": "40m", + "Ethernet42": "40m", + "Ethernet41": "40m", + "Ethernet40": "40m", + "Ethernet29": "40m", + "Ethernet28": "40m", + "Ethernet34": "40m", + "Ethernet46": "40m", + "Ethernet21": "40m", + "Ethernet20": "40m", + "Ethernet23": "40m", + "Ethernet13": "40m", + "Ethernet25": "40m", + "Ethernet24": "40m", + "Ethernet27": "40m", + "Ethernet26": "40m" + } + }, + "CRM": { + "Config": { + "acl_table_threshold_type": "percentage", + "nexthop_group_threshold_type": "percentage", + "fdb_entry_high_threshold": "85", + "acl_entry_threshold_type": "percentage", + "ipv6_neighbor_low_threshold": "70", + "nexthop_group_member_low_threshold": "70", + "acl_group_high_threshold": "85", + "ipv4_route_high_threshold": "85", + "acl_counter_high_threshold": "85", + "ipv4_route_low_threshold": "70", + "ipv4_route_threshold_type": "percentage", + "ipv4_neighbor_low_threshold": "70", + "acl_group_threshold_type": "percentage", + "ipv4_nexthop_high_threshold": "85", + "ipv6_route_threshold_type": "percentage", + "nexthop_group_low_threshold": "70", + "ipv4_neighbor_high_threshold": "85", + "ipv6_route_high_threshold": "85", + "ipv6_nexthop_threshold_type": "percentage", + "polling_interval": "300", + "ipv4_nexthop_threshold_type": "percentage", + "acl_group_low_threshold": "70", + "acl_entry_low_threshold": "70", + "nexthop_group_member_threshold_type": "percentage", + "ipv4_nexthop_low_threshold": "70", + "acl_counter_threshold_type": "percentage", + "ipv6_neighbor_high_threshold": "85", + "nexthop_group_member_high_threshold": "85", + "acl_table_low_threshold": "70", + "fdb_entry_threshold_type": "percentage", + "ipv6_neighbor_threshold_type": "percentage", + "acl_table_high_threshold": "85", + "ipv6_nexthop_low_threshold": "70", + "acl_counter_low_threshold": "70", + "ipv4_neighbor_threshold_type": "percentage", + "nexthop_group_high_threshold": "85", + "ipv6_route_low_threshold": "70", + "acl_entry_high_threshold": "85", + "fdb_entry_low_threshold": "70", + "ipv6_nexthop_high_threshold": "85" + } + } +} diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/cfg/minigraph.xml b/platform/centec/sonic-platform-modules-e582/48x6q/cfg/minigraph.xml new file mode 100644 index 000000000000..fc313eb84635 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/cfg/minigraph.xml @@ -0,0 +1,38 @@ + + + + + + + + + + + + + + + + + switch1 + + + + + + + + + + + + + switch1 + E582-48x6q + + + + switch1 + E582-48x6q + + diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/modules/Makefile b/platform/centec/sonic-platform-modules-e582/48x6q/modules/Makefile new file mode 100644 index 000000000000..25df81bba426 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := centec_e582_48x6q_platform.o dal.o centec_at24c64.o +dal-y := dal_kernel.o dal_mpool.o diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/modules/centec_at24c64.c b/platform/centec/sonic-platform-modules-e582/48x6q/modules/centec_at24c64.c new file mode 100644 index 000000000000..7b551e71f79a --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/modules/centec_at24c64.c @@ -0,0 +1,658 @@ +/* + * at24.c - handle most I2C EEPROMs + * + * Copyright (C) 2005-2007 David Brownell + * Copyright (C) 2008 Wolfram Sang, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. + * Differences between different vendor product lines (like Atmel AT24C or + * MicroChip 24LC, etc) won't much matter for typical read/write access. + * There are also I2C RAM chips, likewise interchangeable. One example + * would be the PCF8570, which acts like a 24c02 EEPROM (256 bytes). + * + * However, misconfiguration can lose data. "Set 16-bit memory address" + * to a part with 8-bit addressing will overwrite data. Writing with too + * big a page size also loses data. And it's not safe to assume that the + * conventional addresses 0x50..0x57 only hold eeproms; a PCF8563 RTC + * uses 0x51, for just one example. + * + * Accordingly, explicit board-specific configuration data should be used + * in almost all cases. (One partial exception is an SMBus used to access + * "SPD" data for DRAM sticks. Those only use 24c02 EEPROMs.) + * + * So this driver uses "new style" I2C driver binding, expecting to be + * told what devices exist. That may be in arch/X/mach-Y/board-Z.c or + * similar kernel-resident tables; or, configuration data coming from + * a bootloader. + * + * Other than binding model, current differences from "eeprom" driver are + * that this one handles write access and isn't restricted to 24c02 devices. + * It also handles larger devices (32 kbit and up) with two-byte addresses, + * which won't work on pure SMBus systems. + */ + +struct at24_data { + struct at24_platform_data chip; + struct memory_accessor macc; + int use_smbus; + + /* + * Lock protects against activities from other Linux tasks, + * but not from changes by other I2C masters. + */ + struct mutex lock; + struct bin_attribute bin; + + u8 *writebuf; + unsigned write_max; + unsigned num_addresses; + + /* + * Some chips tie up multiple I2C addresses; dummy devices reserve + * them for us, and we'll use them with SMBus calls. + */ + struct i2c_client *client[]; +}; + +/* + * This parameter is to help this driver avoid blocking other drivers out + * of I2C for potentially troublesome amounts of time. With a 100 kHz I2C + * clock, one 256 byte read takes about 1/43 second which is excessive; + * but the 1/170 second it takes at 400 kHz may be quite reasonable; and + * at 1 MHz (Fm+) a 1/430 second delay could easily be invisible. + * + * This value is forced to be a power of two so that writes align on pages. + */ +static unsigned io_limit = 128; +module_param(io_limit, uint, 0); +MODULE_PARM_DESC(io_limit, "Maximum bytes per I/O (default 128)"); + +/* + * Specs often allow 5 msec for a page write, sometimes 20 msec; + * it's important to recover from write timeouts. + */ +static unsigned write_timeout = 25; +module_param(write_timeout, uint, 0); +MODULE_PARM_DESC(write_timeout, "Time (in ms) to try writes (default 25)"); + +#define AT24_SIZE_BYTELEN 5 +#define AT24_SIZE_FLAGS 8 + +#define AT24_BITMASK(x) (BIT(x) - 1) + +/* create non-zero magic value for given eeprom parameters */ +#define AT24_DEVICE_MAGIC(_len, _flags) \ + ((1 << AT24_SIZE_FLAGS | (_flags)) \ + << AT24_SIZE_BYTELEN | ilog2(_len)) + +static const struct i2c_device_id at24_ctc_ids[] = { + { "24c64-ctc", AT24_DEVICE_MAGIC(65536 / 8, AT24_FLAG_ADDR16 | AT24_FLAG_READONLY | AT24_FLAG_IRUGO) }, + { /* END OF LIST */ } +}; +MODULE_DEVICE_TABLE(i2c, at24_ctc_ids); + +/*-------------------------------------------------------------------------*/ + +/* + * This routine supports chips which consume multiple I2C addresses. It + * computes the addressing information to be used for a given r/w request. + * Assumes that sanity checks for offset happened at sysfs-layer. + */ +static struct i2c_client *at24_translate_offset(struct at24_data *at24, + unsigned *offset) +{ + unsigned i; + + if (at24->chip.flags & AT24_FLAG_ADDR16) { + i = *offset >> 16; + *offset &= 0xffff; + } else { + i = *offset >> 8; + *offset &= 0xff; + } + + return at24->client[i]; +} + +static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, + unsigned offset, size_t count) +{ + struct i2c_msg msg[2]; + struct i2c_client *client; + unsigned long timeout, read_time; + int status; + + memset(msg, 0, sizeof(msg)); + + /* + * REVISIT some multi-address chips don't rollover page reads to + * the next slave address, so we may need to truncate the count. + * Those chips might need another quirk flag. + * + * If the real hardware used four adjacent 24c02 chips and that + * were misconfigured as one 24c08, that would be a similar effect: + * one "eeprom" file not four, but larger reads would fail when + * they crossed certain pages. + */ + + /* + * Slave address and byte offset derive from the offset. Always + * set the byte address; on a multi-master board, another master + * may have changed the chip's "current" address pointer. + */ + client = at24_translate_offset(at24, &offset); + + if (count > io_limit) + count = io_limit; + + count = 1; + + /* + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + read_time = jiffies; + + status = i2c_smbus_write_byte_data(client, (offset >> 8) & 0x0ff, offset & 0x0ff ); + status = i2c_smbus_read_byte(client); + if (status >= 0) { + buf[0] = status; + status = count; + } + + dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", + count, offset, status, jiffies); + + if (status == count) + return count; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(read_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t at24_read(struct at24_data *at24, + char *buf, loff_t off, size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) + return count; + + memset(buf, 0, count); + + /* + * Read data from chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&at24->lock); + + while (count) { + ssize_t status; + + status = at24_eeprom_read(at24, buf, off, count); + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + //printk(KERN_ALERT "at24_read buf = %s, retval = %zu\n", buf, retval); + + mutex_unlock(&at24->lock); + + return retval; +} + +static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct at24_data *at24; + + at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); + return at24_read(at24, buf, off, count); +} + + +/* + * Note that if the hardware write-protect pin is pulled high, the whole + * chip is normally write protected. But there are plenty of product + * variants here, including OTP fuses and partial chip protect. + * + * We only use page mode writes; the alternative is sloooow. This routine + * writes at most one page. + */ +static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf, + unsigned offset, size_t count) +{ + struct i2c_client *client; + ssize_t status; + unsigned long timeout, write_time; + unsigned next_page; + + /* Get corresponding I2C address and adjust offset */ + client = at24_translate_offset(at24, &offset); + + /* write_max is at most a page */ + if (count > at24->write_max) + count = at24->write_max; + + /* Never roll over backwards, to the start of this page */ + next_page = roundup(offset + 1, at24->chip.page_size); + if (offset + count > next_page) + count = next_page - offset; + + /* + * Writes fail if the previous one didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. + */ + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + write_time = jiffies; + + status = i2c_smbus_write_word_data(client, + (offset >> 8) & 0x0ff, (offset & 0xFF) | buf[0]); + if (status == 0) + status = count; + + dev_dbg(&client->dev, "write %zu@%d --> %zd (%ld)\n", + count, offset, status, jiffies); + + if (status == count) + return count; + + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(write_time, timeout)); + + return -ETIMEDOUT; +} + +static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, + size_t count) +{ + ssize_t retval = 0; + + if (unlikely(!count)) + return count; + + /* + * Write data to chip, protecting against concurrent updates + * from this host, but not from other I2C masters. + */ + mutex_lock(&at24->lock); + + while (count) { + ssize_t status; + + status = at24_eeprom_write(at24, buf, off, 1); /* only one-byte to write; TODO page wirte */ + if (status <= 0) { + if (retval == 0) + retval = status; + break; + } + buf += status; + off += status; + count -= status; + retval += status; + } + + mutex_unlock(&at24->lock); + + return retval; +} + +static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj, + struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct at24_data *at24; + + if (unlikely(off >= attr->size)) + return -EFBIG; + + at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); + return at24_write(at24, buf, off, count); +} + +/*-------------------------------------------------------------------------*/ + +/* + * This lets other kernel code access the eeprom data. For example, it + * might hold a board's Ethernet address, or board-specific calibration + * data generated on the manufacturing floor. + */ + +static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf, + off_t offset, size_t count) +{ + struct at24_data *at24 = container_of(macc, struct at24_data, macc); + + return at24_read(at24, buf, offset, count); +} + +static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf, + off_t offset, size_t count) +{ + struct at24_data *at24 = container_of(macc, struct at24_data, macc); + + return at24_write(at24, buf, offset, count); +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_OF +static void at24_get_ofdata(struct i2c_client *client, + struct at24_platform_data *chip) +{ + const __be32 *val; + struct device_node *node = client->dev.of_node; + + if (node) { + if (of_get_property(node, "read-only", NULL)) + chip->flags |= AT24_FLAG_READONLY; + val = of_get_property(node, "pagesize", NULL); + if (val) + chip->page_size = be32_to_cpup(val); + } +} +#else +static void at24_get_ofdata(struct i2c_client *client, + struct at24_platform_data *chip) +{ } +#endif /* CONFIG_OF */ + +static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct at24_platform_data chip; + bool writable; + int use_smbus = 0; + struct at24_data *at24; + int err; + unsigned i, num_addresses; + kernel_ulong_t magic; + + if (client->dev.platform_data) { + chip = *(struct at24_platform_data *)client->dev.platform_data; + } else { + if (!id->driver_data) + return -ENODEV; + + magic = id->driver_data; + chip.byte_len = BIT(magic & AT24_BITMASK(AT24_SIZE_BYTELEN)); + magic >>= AT24_SIZE_BYTELEN; + chip.flags = magic & AT24_BITMASK(AT24_SIZE_FLAGS); + + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + chip.page_size = 1; + + /* update chipdata if OF is present */ + at24_get_ofdata(client, &chip); + + printk(KERN_ALERT "at24_probe chip.byte_len = 0x%x\n", chip.byte_len); + printk(KERN_ALERT "at24_probe chip.flags = 0x%x\n", chip.flags); + printk(KERN_ALERT "at24_probe chip.magic = 0x%lx\n", id->driver_data); + + chip.setup = NULL; + chip.context = NULL; + } + + if (!is_power_of_2(chip.byte_len)) + dev_warn(&client->dev, + "byte_len looks suspicious (no power of 2)!\n"); + if (!chip.page_size) { + dev_err(&client->dev, "page_size must not be 0!\n"); + return -EINVAL; + } + if (!is_power_of_2(chip.page_size)) + dev_warn(&client->dev, + "page_size looks suspicious (no power of 2)!\n"); + + /* Use I2C operations unless we're stuck with SMBus extensions. */ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + use_smbus = I2C_SMBUS_I2C_BLOCK_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) { + use_smbus = I2C_SMBUS_WORD_DATA; + } else if (i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_BYTE_DATA)) { + use_smbus = I2C_SMBUS_BYTE_DATA; + } else { + return -EPFNOSUPPORT; + } + use_smbus = I2C_SMBUS_BYTE_DATA; + printk(KERN_ALERT "at24_probe use_smbus --> %d\n", + use_smbus); + } + + if (chip.flags & AT24_FLAG_TAKE8ADDR) + num_addresses = 8; + else + num_addresses = DIV_ROUND_UP(chip.byte_len, + (chip.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + + at24 = devm_kzalloc(&client->dev, sizeof(struct at24_data) + + num_addresses * sizeof(struct i2c_client *), GFP_KERNEL); + if (!at24) + return -ENOMEM; + + mutex_init(&at24->lock); + at24->use_smbus = use_smbus; + at24->chip = chip; + at24->num_addresses = num_addresses; + + /* + * Export the EEPROM bytes through sysfs, since that's convenient. + * By default, only root should see the data (maybe passwords etc) + */ + sysfs_bin_attr_init(&at24->bin); + at24->bin.attr.name = "eeprom"; + at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; + at24->bin.read = at24_bin_read; + at24->bin.size = chip.byte_len; + + at24->macc.read = at24_macc_read; + + writable = !(chip.flags & AT24_FLAG_READONLY); + if (writable) { + if (!use_smbus || i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)) { + + unsigned write_max = chip.page_size; + + at24->macc.write = at24_macc_write; + + at24->bin.write = at24_bin_write; + at24->bin.attr.mode |= S_IWUSR; + + if (write_max > io_limit) + write_max = io_limit; + if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) + write_max = I2C_SMBUS_BLOCK_MAX; + at24->write_max = write_max; + + /* buffer (data + address at the beginning) */ + at24->writebuf = devm_kzalloc(&client->dev, + write_max + 2, GFP_KERNEL); + if (!at24->writebuf) + return -ENOMEM; + } else { + dev_warn(&client->dev, + "cannot write due to controller restrictions."); + } + } + + at24->client[0] = client; + + /* use dummy devices for multiple-address chips */ + for (i = 1; i < num_addresses; i++) { + at24->client[i] = i2c_new_dummy(client->adapter, + client->addr + i); + if (!at24->client[i]) { + dev_err(&client->dev, "address 0x%02x unavailable\n", + client->addr + i); + err = -EADDRINUSE; + goto err_clients; + } + } + + err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); + if (err) + goto err_clients; + + i2c_set_clientdata(client, at24); + + dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n", + at24->bin.size, client->name, + writable ? "writable" : "read-only", at24->write_max); + if (use_smbus == I2C_SMBUS_WORD_DATA || + use_smbus == I2C_SMBUS_BYTE_DATA) { + dev_notice(&client->dev, "Falling back to %s reads, " + "performance will suffer\n", use_smbus == + I2C_SMBUS_WORD_DATA ? "word" : "byte"); + } + + /* export data to kernel code */ + if (chip.setup) + chip.setup(&at24->macc, chip.context); + + return 0; + +err_clients: + for (i = 1; i < num_addresses; i++) + if (at24->client[i]) + i2c_unregister_device(at24->client[i]); + + return err; +} + +static int at24_remove(struct i2c_client *client) +{ + struct at24_data *at24; + int i; + + at24 = i2c_get_clientdata(client); + sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); + + for (i = 1; i < at24->num_addresses; i++) + i2c_unregister_device(at24->client[i]); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static struct i2c_board_info i2c_devs = { + I2C_BOARD_INFO("24c64-ctc", 0x57), +}; + +static struct i2c_adapter *adapter = NULL; +static struct i2c_client *client = NULL; + +static int ctc_at24c64_init(void) +{ + printk(KERN_ALERT "ctc_at24c64_init\n"); + + adapter = i2c_get_adapter(0); + if(adapter == NULL){ + printk(KERN_ALERT "i2c_get_adapter == NULL\n"); + return -1; + } + + client = i2c_new_device(adapter, &i2c_devs); + if(client == NULL){ + printk(KERN_ALERT "i2c_new_device == NULL\n"); + i2c_put_adapter(adapter); + adapter = NULL; + return -1; + } + + return 0; +} + +static void ctc_at24c64_exit(void) +{ + printk(KERN_ALERT "ctc_at24c64_exit\n"); + if(client){ + i2c_unregister_device(client); + } + if(adapter){ + i2c_put_adapter(adapter); + } +} + +static struct i2c_driver at24_ctc_driver = { + .driver = { + .name = "at24-ctc", + .owner = THIS_MODULE, + }, + .probe = at24_probe, + .remove = at24_remove, + .id_table = at24_ctc_ids, +}; + +static int __init at24_ctc_init(void) +{ + if (!io_limit) { + pr_err("at24_ctc: io_limit must not be 0!\n"); + return -EINVAL; + } + + io_limit = rounddown_pow_of_two(io_limit); + + ctc_at24c64_init(); + + return i2c_add_driver(&at24_ctc_driver); +} +module_init(at24_ctc_init); + +static void __exit at24_ctc_exit(void) +{ + ctc_at24c64_exit(); + i2c_del_driver(&at24_ctc_driver); +} +module_exit(at24_ctc_exit); + +MODULE_DESCRIPTION("Driver for most I2C EEPROMs"); +MODULE_AUTHOR("David Brownell and Wolfram Sang"); +MODULE_LICENSE("GPL"); +/* XXX */ diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/modules/centec_e582_48x6q_platform.c b/platform/centec/sonic-platform-modules-e582/48x6q/modules/centec_e582_48x6q_platform.c new file mode 100644 index 000000000000..4837335872e4 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/modules/centec_e582_48x6q_platform.c @@ -0,0 +1,1380 @@ +#include +#include +#include +#include +#include +#include +#include + +#define SEP(XXX) 1 +#define IS_INVALID_PTR(_PTR_) ((_PTR_ == NULL) || IS_ERR(_PTR_)) +#define IS_VALID_PTR(_PTR_) (!IS_INVALID_PTR(_PTR_)) + +#if SEP("defines") +#define PCA9548_CHANNEL_NUM 8 +#define PCA9548_ADAPT_ID_START 10 +#define SFP_NUM 48 +#define QSFP_NUM 6 +#define PORT_NUM (SFP_NUM+QSFP_NUM) +#endif + +#if SEP("i2c:master") +static struct i2c_adapter *i2c_adp_master = NULL; /* i2c-0-cpu */ + +static int e582_48x6q_init_i2c_master(void) +{ + /* find i2c-core master */ + i2c_adp_master = i2c_get_adapter(0); + if(IS_INVALID_PTR(i2c_adp_master)) + { + i2c_adp_master = NULL; + printk(KERN_CRIT "e582_48x6q_init_i2c_master can't find i2c-core bus\n"); + return -1; + } + + return 0; +} + +static int e582_48x6q_exit_i2c_master(void) +{ + /* uninstall i2c-core master */ + if(IS_VALID_PTR(i2c_adp_master)) { + i2c_put_adapter(i2c_adp_master); + i2c_adp_master = NULL; + } + + return 0; +} +#endif + +#if SEP("i2c:pca9548") +static struct pca954x_platform_mode i2c_dev_pca9548_platform_mode[PCA9548_CHANNEL_NUM] = { + [0] = { + .adap_id = PCA9548_ADAPT_ID_START, + .deselect_on_exit = 1, + .class = 0, + }, + [1] = { + .adap_id = PCA9548_ADAPT_ID_START + 1, + .deselect_on_exit = 1, + .class = 0, + }, + [2] = { + .adap_id = PCA9548_ADAPT_ID_START + 2, + .deselect_on_exit = 1, + .class = 0, + }, + [3] = { + .adap_id = PCA9548_ADAPT_ID_START + 3, + .deselect_on_exit = 1, + .class = 0, + }, + [4] = { + .adap_id = PCA9548_ADAPT_ID_START + 4, + .deselect_on_exit = 1, + .class = 0, + }, + [5] = { + .adap_id = PCA9548_ADAPT_ID_START + 5, + .deselect_on_exit = 1, + .class = 0, + }, + [6] = { + .adap_id = PCA9548_ADAPT_ID_START + 6, + .deselect_on_exit = 1, + .class = 0, + }, + [7] = { + .adap_id = PCA9548_ADAPT_ID_START + 7, + .deselect_on_exit = 1, + .class = 0, + } +}; +static struct pca954x_platform_data i2c_dev_pca9548_platform_data = { + .modes = i2c_dev_pca9548_platform_mode, + .num_modes = PCA9548_CHANNEL_NUM, +}; +static struct i2c_board_info i2c_dev_pca9548 = { + I2C_BOARD_INFO("pca9548", 0x70), + .platform_data = &i2c_dev_pca9548_platform_data, +}; +static struct i2c_client *i2c_client_pca9548x = NULL; + +static int e582_48x6q_init_i2c_pca9548(void) +{ + if(IS_INVALID_PTR(i2c_adp_master)) + { + i2c_adp_master = NULL; + printk(KERN_CRIT "e582_48x6q_init_i2c_pca9548 can't find i2c-core bus\n"); + return -1; + } + + /* install i2c-mux */ + i2c_client_pca9548x = i2c_new_device(i2c_adp_master, &i2c_dev_pca9548); + if(IS_INVALID_PTR(i2c_client_pca9548x)) + { + i2c_client_pca9548x = NULL; + printk(KERN_CRIT "install e582_48x6q board pca9548 failed\n"); + return -1; + } + + return 0; +} + +static int e582_48x6q_exit_i2c_pca9548(void) +{ + /* uninstall i2c-core master */ + if(IS_VALID_PTR(i2c_client_pca9548x)) { + i2c_unregister_device(i2c_client_pca9548x); + i2c_client_pca9548x = NULL; + } + + return 0; +} +#endif + +#if SEP("i2c:adt7470") +static struct i2c_board_info i2c_dev_adt7470 = { + I2C_BOARD_INFO("adt7470", 0x2F), +}; +static struct i2c_adapter *i2c_adp_adt7470 = NULL; /* pca9548x-channel 5 */ +static struct i2c_client *i2c_client_adt7470 = NULL; + +static int e582_48x6q_init_i2c_adt7470(void) +{ + i2c_adp_adt7470 = i2c_get_adapter(PCA9548_ADAPT_ID_START + 5); + if(IS_INVALID_PTR(i2c_adp_adt7470)) + { + i2c_adp_adt7470 = NULL; + printk(KERN_CRIT "install e582_48x6q board adt7470 failed\n"); + return -1; + } + + i2c_client_adt7470 = i2c_new_device(i2c_adp_adt7470, &i2c_dev_adt7470); + if(IS_INVALID_PTR(i2c_client_adt7470)){ + i2c_client_adt7470 = NULL; + printk(KERN_CRIT "install e582_48x6q board adt7470 failed\n"); + return -1; + } + + return 0; +} + +static int e582_48x6q_exit_i2c_adt7470(void) +{ + if(IS_VALID_PTR(i2c_client_adt7470)) { + i2c_unregister_device(i2c_client_adt7470); + i2c_client_adt7470 = NULL; + } + + if(IS_VALID_PTR(i2c_adp_adt7470)) { + i2c_put_adapter(i2c_adp_adt7470); + i2c_adp_adt7470 = NULL; + } + + return 0; +} +#endif + +#if SEP("i2c:psu") +static struct i2c_adapter *i2c_adp_psu1 = NULL; /* psu1 channel 3 */ +static struct i2c_adapter *i2c_adp_psu2 = NULL; /* psu2 channel 1 */ +static struct i2c_board_info i2c_dev_psu1 = { + I2C_BOARD_INFO("i2c-psu1", 0x38), +}; +static struct i2c_board_info i2c_dev_psu2 = { + I2C_BOARD_INFO("i2c-psu2", 0x38), +}; +static struct i2c_client *i2c_client_psu1 = NULL; +static struct i2c_client *i2c_client_psu2 = NULL; + +static int e582_48x6q_init_i2c_psu(void) +{ + i2c_adp_psu1 = i2c_get_adapter(PCA9548_ADAPT_ID_START + 3); + if(IS_INVALID_PTR(i2c_adp_psu1)) + { + i2c_adp_psu1 = NULL; + printk(KERN_CRIT "get e582_48x6q psu1 i2c-adp failed\n"); + return -1; + } + + i2c_adp_psu2 = i2c_get_adapter(PCA9548_ADAPT_ID_START + 1); + if(IS_INVALID_PTR(i2c_adp_psu2)) + { + i2c_adp_psu2 = NULL; + printk(KERN_CRIT "get e582_48x6q psu2 i2c-adp failed\n"); + return -1; + } + + i2c_client_psu1 = i2c_new_device(i2c_adp_psu1, &i2c_dev_psu1); + if(IS_INVALID_PTR(i2c_client_psu1)){ + i2c_client_psu1 = NULL; + printk(KERN_CRIT "create e582_48x6q board i2c client psu1 failed\n"); + return -1; + } + + i2c_client_psu2 = i2c_new_device(i2c_adp_psu2, &i2c_dev_psu2); + if(IS_INVALID_PTR(i2c_client_psu2)){ + i2c_client_psu2 = NULL; + printk(KERN_CRIT "create e582_48x6q board i2c client psu2 failed\n"); + return -1; + } + + return 0; +} + +static int e582_48x6q_exit_i2c_psu(void) +{ + if(IS_VALID_PTR(i2c_client_psu1)) { + i2c_unregister_device(i2c_client_psu1); + i2c_client_psu1 = NULL; + } + + if(IS_VALID_PTR(i2c_client_psu2)) { + i2c_unregister_device(i2c_client_psu2); + i2c_client_psu2 = NULL; + } + + if(IS_VALID_PTR(i2c_adp_psu1)) + { + i2c_put_adapter(i2c_adp_psu1); + i2c_adp_psu1 = NULL; + } + + if(IS_VALID_PTR(i2c_adp_psu2)) + { + i2c_put_adapter(i2c_adp_psu2); + i2c_adp_psu2 = NULL; + } + + return 0; +} +#endif + +#if SEP("i2c:epld") +static struct i2c_board_info i2c_dev_epld = { + I2C_BOARD_INFO("i2c-epld", 0x58), +}; +static struct i2c_client *i2c_client_epld = NULL; + +static int e582_48x6q_init_i2c_epld(void) +{ + if (IS_INVALID_PTR(i2c_adp_master)) + { + printk(KERN_CRIT "e582_48x6q_init_i2c_epld can't find i2c-core bus\n"); + return -1; + } + + i2c_client_epld = i2c_new_device(i2c_adp_master, &i2c_dev_epld); + if(IS_INVALID_PTR(i2c_client_epld)) + { + i2c_client_epld = NULL; + printk(KERN_CRIT "create e582_48x6q board i2c client epld failed\n"); + return -1; + } + + return 0; +} + +static int e582_48x6q_exit_i2c_epld(void) +{ + if(IS_VALID_PTR(i2c_client_epld)) { + i2c_unregister_device(i2c_client_epld); + i2c_client_epld = NULL; + } + + return 0; +} +#endif + +#if SEP("i2c:gpio") +static struct i2c_board_info i2c_dev_gpio0 = { + I2C_BOARD_INFO("i2c-gpio0", 0x20), +}; +static struct i2c_board_info i2c_dev_gpio1 = { + I2C_BOARD_INFO("i2c-gpio1", 0x21), +}; +static struct i2c_board_info i2c_dev_gpio2 = { + I2C_BOARD_INFO("i2c-gpio2", 0x22), +}; +static struct i2c_board_info i2c_dev_gpio3 = { + I2C_BOARD_INFO("i2c-gpio3", 0x23), +}; +static struct i2c_board_info i2c_dev_gpio4 = { + I2C_BOARD_INFO("i2c-gpio4", 0x24), +}; +static struct i2c_client *i2c_client_gpio0 = NULL; +static struct i2c_client *i2c_client_gpio1 = NULL; +static struct i2c_client *i2c_client_gpio2 = NULL; +static struct i2c_client *i2c_client_gpio3 = NULL; +static struct i2c_client *i2c_client_gpio4 = NULL; + +static int e582_48x6q_init_i2c_gpio(void) +{ + if (IS_INVALID_PTR(i2c_adp_master)) + { + printk(KERN_CRIT "e582_48x6q_init_i2c_gpio can't find i2c-core bus\n"); + return -1; + } + + i2c_client_gpio0 = i2c_new_device(i2c_adp_master, &i2c_dev_gpio0); + if(IS_INVALID_PTR(i2c_client_gpio0)) + { + i2c_client_gpio0 = NULL; + printk(KERN_CRIT "create e582_48x6q board i2c client gpio0 failed\n"); + return -1; + } + + i2c_client_gpio1 = i2c_new_device(i2c_adp_master, &i2c_dev_gpio1); + if(IS_INVALID_PTR(i2c_client_gpio1)) + { + i2c_client_gpio1 = NULL; + printk(KERN_CRIT "create e582_48x6q board i2c client gpio1 failed\n"); + return -1; + } + + i2c_client_gpio2 = i2c_new_device(i2c_adp_master, &i2c_dev_gpio2); + if(IS_INVALID_PTR(i2c_client_gpio2)) + { + i2c_client_gpio2 = NULL; + printk(KERN_CRIT "create e582_48x6q board i2c client gpio2 failed\n"); + return -1; + } + + i2c_client_gpio3 = i2c_new_device(i2c_adp_master, &i2c_dev_gpio3); + if(IS_INVALID_PTR(i2c_client_gpio3)) + { + i2c_client_gpio3 = NULL; + printk(KERN_CRIT "create e582_48x6q board i2c client gpio3 failed\n"); + return -1; + } + + i2c_client_gpio4 = i2c_new_device(i2c_adp_master, &i2c_dev_gpio4); + if(IS_INVALID_PTR(i2c_client_gpio4)) + { + i2c_client_gpio4 = NULL; + printk(KERN_CRIT "create e582_48x6q board i2c client gpio4 failed\n"); + return -1; + } + + return 0; +} + +static int e582_48x6q_exit_i2c_gpio(void) +{ + if(IS_VALID_PTR(i2c_client_gpio0)) { + i2c_unregister_device(i2c_client_gpio0); + i2c_client_gpio0 = NULL; + } + + if((i2c_client_gpio1)) { + i2c_unregister_device(i2c_client_gpio1); + i2c_client_gpio1 = NULL; + } + + if(IS_VALID_PTR(i2c_client_gpio2)) { + i2c_unregister_device(i2c_client_gpio2); + i2c_client_gpio2 = NULL; + } + + if(IS_VALID_PTR(i2c_client_gpio3)) { + i2c_unregister_device(i2c_client_gpio3); + i2c_client_gpio3 = NULL; + } + + if(IS_VALID_PTR(i2c_client_gpio4)) { + i2c_unregister_device(i2c_client_gpio4); + i2c_client_gpio4 = NULL; + } + + return 0; +} +#endif + +#if SEP("i2c:smbus") +static int e582_48x6q_smbus_read_reg(struct i2c_client *client, unsigned char reg, unsigned char* value) +{ + int ret = 0; + + if (IS_INVALID_PTR(client)) + { + printk(KERN_CRIT "invalid i2c client"); + return -1; + } + + ret = i2c_smbus_read_byte_data(client, reg); + if (ret >= 0) { + *value = (unsigned char)ret; + } + else + { + *value = 0; + printk(KERN_CRIT "i2c_smbus op failed: ret=%d reg=%d\n",ret ,reg); + return ret; + } + + return 0; +} + +static int e582_48x6q_smbus_write_reg(struct i2c_client *client, unsigned char reg, unsigned char value) +{ + int ret = 0; + + if (IS_INVALID_PTR(client)) + { + printk(KERN_CRIT "invalid i2c client"); + return -1; + } + + ret = i2c_smbus_write_byte_data(client, reg, value); + if (ret != 0) + { + printk(KERN_CRIT "i2c_smbus op failed: ret=%d reg=%d\n",ret ,reg); + return ret; + } + + return 0; +} +#endif + +#if SEP("drivers:psu") +static struct class* psu_class = NULL; +static struct device* psu_dev_psu1 = NULL; +static struct device* psu_dev_psu2 = NULL; + +static ssize_t e582_48x6q_psu_read_presence(struct device *dev, struct device_attribute *attr, char *buf) +{ + int ret = 0; + unsigned char present_no = 0; + unsigned char present = 0; + unsigned char value = 0; + struct i2c_client *i2c_psu_client = NULL; + + if (psu_dev_psu1 == dev) + { + i2c_psu_client = i2c_client_gpio0; + present_no = 17; + } + else if (psu_dev_psu2 == dev) + { + i2c_psu_client = i2c_client_gpio0; + present_no = 9; + } + else + { + return sprintf(buf, "Error: unknown psu device\n"); + } + + if (IS_INVALID_PTR(i2c_psu_client)) + { + return sprintf(buf, "Error: psu i2c-adapter invalid\n"); + } + + ret = e582_48x6q_smbus_read_reg(i2c_psu_client, present_no/8, &present); + if (ret != 0) + { + return sprintf(buf, "Error: read psu data:%s failed\n", attr->attr.name); + } + + value = ((present & (1<<(present_no%8))) ? 1 : 0 ); + + return sprintf(buf, "%d\n", value); +} + +static ssize_t e582_48x6q_psu_read_status(struct device *dev, struct device_attribute *attr, char *buf) +{ + int ret = 0; + unsigned char workstate_no = 0; + unsigned char workstate = 0; + unsigned char value = 0; + struct i2c_client *i2c_psu_client = NULL; + + if (psu_dev_psu1 == dev) + { + i2c_psu_client = i2c_client_gpio0; + workstate_no = 21; + } + else if (psu_dev_psu2 == dev) + { + i2c_psu_client = i2c_client_gpio0; + workstate_no = 13; + } + else + { + return sprintf(buf, "Error: unknown psu device\n"); + } + + if (IS_INVALID_PTR(i2c_psu_client)) + { + return sprintf(buf, "Error: psu i2c-adapter invalid\n"); + } + + ret = e582_48x6q_smbus_read_reg(i2c_psu_client, workstate_no/8, &workstate); + if (ret != 0) + { + return sprintf(buf, "Error: read psu data:%s failed\n", attr->attr.name); + } + + if (ret != 0) + { + return sprintf(buf, "Error: read psu data:%s failed\n", attr->attr.name); + } + + value = ((workstate & (1<<(workstate_no%8))) ? 1 : 0 ); + + return sprintf(buf, "%d\n", value); +} + +static DEVICE_ATTR(psu_presence, S_IRUGO, e582_48x6q_psu_read_presence, NULL); +static DEVICE_ATTR(psu_status, S_IRUGO, e582_48x6q_psu_read_status, NULL); + +static int e582_48x6q_init_psu(void) +{ + int ret = 0; + + psu_class = class_create(THIS_MODULE, "psu"); + if (IS_INVALID_PTR(psu_class)) + { + psu_class = NULL; + printk(KERN_CRIT "create e582_48x6q class psu failed\n"); + return -1; + } + + psu_dev_psu1 = device_create(psu_class, NULL, MKDEV(222,0), NULL, "psu1"); + if (IS_INVALID_PTR(psu_dev_psu1)) + { + psu_dev_psu1 = NULL; + printk(KERN_CRIT "create e582_48x6q psu1 device failed\n"); + return -1; + } + + psu_dev_psu2 = device_create(psu_class, NULL, MKDEV(222,1), NULL, "psu2"); + if (IS_INVALID_PTR(psu_dev_psu2)) + { + psu_dev_psu2 = NULL; + printk(KERN_CRIT "create e582_48x6q psu2 device failed\n"); + return -1; + } + + ret = device_create_file(psu_dev_psu1, &dev_attr_psu_presence); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q psu1 device attr:presence failed\n"); + return -1; + } + + ret = device_create_file(psu_dev_psu1, &dev_attr_psu_status); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q psu1 device attr:status failed\n"); + return -1; + } + + ret = device_create_file(psu_dev_psu2, &dev_attr_psu_presence); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q psu2 device attr:presence failed\n"); + return -1; + } + + ret = device_create_file(psu_dev_psu2, &dev_attr_psu_status); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q psu2 device attr:status failed\n"); + return -1; + } + + return 0; +} + +static int e582_48x6q_exit_psu(void) +{ + if (IS_VALID_PTR(psu_dev_psu1)) + { + device_remove_file(psu_dev_psu1, &dev_attr_psu_presence); + device_remove_file(psu_dev_psu1, &dev_attr_psu_status); + device_destroy(psu_class, MKDEV(222,0)); + } + + if (IS_VALID_PTR(psu_dev_psu2)) + { + device_remove_file(psu_dev_psu2, &dev_attr_psu_presence); + device_remove_file(psu_dev_psu2, &dev_attr_psu_status); + device_destroy(psu_class, MKDEV(222,1)); + } + + if (IS_VALID_PTR(psu_class)) + { + class_destroy(psu_class); + psu_class = NULL; + } + + return 0; +} +#endif + +#if SEP("drivers:leds") +extern void e582_48x6q_led_set(struct led_classdev *led_cdev, enum led_brightness set_value); +extern enum led_brightness e582_48x6q_led_get(struct led_classdev *led_cdev); +extern void e582_48x6q_led_port_set(struct led_classdev *led_cdev, enum led_brightness set_value); +extern enum led_brightness e582_48x6q_led_port_get(struct led_classdev *led_cdev); + +static struct led_classdev led_dev_system = { + .name = "system", + .brightness_set = e582_48x6q_led_set, + .brightness_get = e582_48x6q_led_get, +}; +static struct led_classdev led_dev_idn = { + .name = "idn", + .brightness_set = e582_48x6q_led_set, + .brightness_get = e582_48x6q_led_get, +}; +static struct led_classdev led_dev_fan1 = { + .name = "fan1", + .brightness_set = e582_48x6q_led_set, + .brightness_get = e582_48x6q_led_get, +}; +static struct led_classdev led_dev_fan2 = { + .name = "fan2", + .brightness_set = e582_48x6q_led_set, + .brightness_get = e582_48x6q_led_get, +}; +static struct led_classdev led_dev_fan3 = { + .name = "fan3", + .brightness_set = e582_48x6q_led_set, + .brightness_get = e582_48x6q_led_get, +}; +static struct led_classdev led_dev_fan4 = { + .name = "fan4", + .brightness_set = e582_48x6q_led_set, + .brightness_get = e582_48x6q_led_get, +}; +static struct led_classdev led_dev_psu1 = { + .name = "psu1", + .brightness_set = e582_48x6q_led_set, + .brightness_get = e582_48x6q_led_get, +}; +static struct led_classdev led_dev_psu2 = { + .name = "psu2", + .brightness_set = e582_48x6q_led_set, + .brightness_get = e582_48x6q_led_get, +}; +static struct led_classdev led_dev_port[PORT_NUM] = { +{ .name = "port1", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port2", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port3", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port4", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port5", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port6", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port7", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port8", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port9", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port10", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port11", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port12", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port13", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port14", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port15", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port16", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port17", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port18", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port19", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port20", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port21", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port22", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port23", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port24", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port25", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port26", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port27", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port28", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port29", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port30", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port31", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port32", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port33", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port34", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port35", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port36", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port37", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port38", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port39", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port40", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port41", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port42", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port43", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port44", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port45", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port46", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port47", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port48", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port49", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port50", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port51", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port52", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port53", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,}, +{ .name = "port54", .brightness_set = e582_48x6q_led_port_set, .brightness_get = e582_48x6q_led_port_get,} +}; +static unsigned char port_led_mode[PORT_NUM] = {0}; + +void e582_48x6q_led_set(struct led_classdev *led_cdev, enum led_brightness set_value) +{ + int ret = 0; + unsigned char reg = 0; + unsigned char mask = 0; + unsigned char shift = 0; + unsigned char led_value = 0; + struct i2c_client *i2c_led_client = i2c_client_epld; + + if (0 == strcmp(led_dev_system.name, led_cdev->name)) + { + reg = 0x2; + mask = 0x0F; + shift = 4; + } + else if (0 == strcmp(led_dev_idn.name, led_cdev->name)) + { + reg = 0x3; + mask = 0xFE; + shift = 0; + } + else if (0 == strcmp(led_dev_fan1.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_fan2.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_fan3.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_fan4.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_psu1.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_psu2.name, led_cdev->name)) + { + goto not_support; + } + else + { + goto not_support; + } + + ret = e582_48x6q_smbus_read_reg(i2c_led_client, reg, &led_value); + if (ret != 0) + { + printk(KERN_CRIT "Error: read %s led attr failed\n", led_cdev->name); + return; + } + + led_value = ((led_value & mask) | ((set_value << shift) & (~mask))); + + ret = e582_48x6q_smbus_write_reg(i2c_led_client, reg, led_value); + if (ret != 0) + { + printk(KERN_CRIT "Error: write %s led attr failed\n", led_cdev->name); + return; + } + + return; + +not_support: + + printk(KERN_INFO "Error: not support device:%s\n", led_cdev->name); + return; +} + +enum led_brightness e582_48x6q_led_get(struct led_classdev *led_cdev) +{ + int ret = 0; + unsigned char reg = 0; + unsigned char mask = 0; + unsigned char shift = 0; + unsigned char led_value = 0; + struct i2c_client *i2c_led_client = i2c_client_epld; + + if (0 == strcmp(led_dev_system.name, led_cdev->name)) + { + reg = 0x2; + mask = 0xF0; + shift = 4; + } + else if (0 == strcmp(led_dev_idn.name, led_cdev->name)) + { + reg = 0x3; + mask = 0x01; + shift = 0; + } + else if (0 == strcmp(led_dev_fan1.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_fan2.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_fan3.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_fan4.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_psu1.name, led_cdev->name)) + { + goto not_support; + } + else if (0 == strcmp(led_dev_psu2.name, led_cdev->name)) + { + goto not_support; + } + else + { + goto not_support; + } + + ret = e582_48x6q_smbus_read_reg(i2c_led_client, reg, &led_value); + if (ret != 0) + { + printk(KERN_CRIT "Error: read %s led attr failed\n", led_cdev->name); + return; + } + + led_value = ((led_value & mask) >> shift); + + return led_value; + +not_support: + + printk(KERN_INFO "Error: not support device:%s\n", led_cdev->name); + return 0; +} + +void e582_48x6q_led_port_set(struct led_classdev *led_cdev, enum led_brightness set_value) +{ + int portNum = 0; + + sscanf(led_cdev->name, "port%d", &portNum); + + port_led_mode[portNum-1] = set_value; + + return; +} + +enum led_brightness e582_48x6q_led_port_get(struct led_classdev *led_cdev) +{ + int portNum = 0; + + sscanf(led_cdev->name, "port%d", &portNum); + + return port_led_mode[portNum-1]; +} + +static int e582_48x6q_init_led(void) +{ + int ret = 0; + int i = 0; + + ret = led_classdev_register(NULL, &led_dev_system); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q led_dev_system device failed\n"); + return -1; + } + + ret = led_classdev_register(NULL, &led_dev_idn); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q led_dev_idn device failed\n"); + return -1; + } + + ret = led_classdev_register(NULL, &led_dev_fan1); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q led_dev_fan1 device failed\n"); + return -1; + } + + ret = led_classdev_register(NULL, &led_dev_fan2); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q led_dev_fan2 device failed\n"); + return -1; + } + + ret = led_classdev_register(NULL, &led_dev_fan3); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q led_dev_fan3 device failed\n"); + return -1; + } + + ret = led_classdev_register(NULL, &led_dev_fan4); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q led_dev_fan4 device failed\n"); + return -1; + } + + ret = led_classdev_register(NULL, &led_dev_psu1); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q led_dev_psu1 device failed\n"); + return -1; + } + + ret = led_classdev_register(NULL, &led_dev_psu2); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q led_dev_psu2 device failed\n"); + return -1; + } + + for (i=0; i PORT_NUM)) + { + printk(KERN_CRIT "sfp read presence, invalid port number!\n"); + value = 0; + } + + if ((portNum >= 1) && (portNum <= 8)) + { + reg_no = portNum + 31;/*32-39*/ + i2c_sfp_client = i2c_client_gpio0; + } + else if ((portNum >= 9) && (portNum <= 16)) + { + reg_no = portNum + 7;/*16-23*/ + i2c_sfp_client = i2c_client_gpio1; + } + else if ((portNum >= 17) && (portNum <= 24)) + { + reg_no = portNum - 17;/*0-7*/ + i2c_sfp_client = i2c_client_gpio2; + } + else if ((portNum >= 25) && (portNum <= 32)) + { + reg_no = portNum - 1;/*24-31*/ + i2c_sfp_client = i2c_client_gpio2; + } + else if ((portNum >= 33) && (portNum <= 40)) + { + reg_no = portNum - 25;/*8-15*/ + i2c_sfp_client = i2c_client_gpio3; + } + else if ((portNum >= 41) && (portNum <= 48)) + { + reg_no = portNum - 9;/*32-39*/ + i2c_sfp_client = i2c_client_gpio3; + } + else if ((portNum >= 49) && (portNum <= 54)) + { + reg_no = portNum - 25;/*24-29*/ + i2c_sfp_client = i2c_client_gpio4; + } + + dir_bank = (reg_no/8) + 0x18; + ret = e582_48x6q_smbus_write_reg(i2c_sfp_client, dir_bank, 0xff); + if (ret != 0) + { + return sprintf(buf, "Error: read sfp data:%s set dir-ctl failed\n", attr->attr.name); + } + + input_bank = (reg_no/8) + 0x0; + ret = e582_48x6q_smbus_read_reg(i2c_sfp_client, input_bank, &value); + if (ret != 0) + { + return sprintf(buf, "Error: read sfp data:%s failed\n", attr->attr.name); + } + + value = ((value & (1<<(reg_no%8))) ? 0 : 1 );/*1:PRESENT 0:ABSENT*/ + + return sprintf(buf, "%d\n", value); +} + +static ssize_t e582_48x6q_sfp_read_enable(struct device *dev, struct device_attribute *attr, char *buf) +{ + int ret = 0; + unsigned char value = 0; + unsigned char reg_no = 0; + unsigned char dir_bank = 0; + unsigned char input_bank = 0; + int portNum = 0; + const char *name = dev_name(dev); + struct i2c_client *i2c_sfp_client = NULL; + + sscanf(name, "sfp%d", &portNum); + + if ((portNum < 1) || (portNum > PORT_NUM)) + { + printk(KERN_CRIT "sfp read presence, invalid port number!\n"); + value = 0; + } + + if ((portNum >= 1) && (portNum <= 8)) + { + reg_no = portNum + 23;/*24-31*/ + i2c_sfp_client = i2c_client_gpio0; + } + else if ((portNum >= 9) && (portNum <= 16)) + { + reg_no = portNum - 1;/*8-15*/ + i2c_sfp_client = i2c_client_gpio1; + } + else if ((portNum >= 17) && (portNum <= 24)) + { + reg_no = portNum + 15;/*32-39*/ + i2c_sfp_client = i2c_client_gpio1; + } + else if ((portNum >= 25) && (portNum <= 32)) + { + reg_no = portNum - 9;/*16-23*/ + i2c_sfp_client = i2c_client_gpio2; + } + else if ((portNum >= 33) && (portNum <= 40)) + { + reg_no = portNum - 33;/*0-7*/ + i2c_sfp_client = i2c_client_gpio3; + } + else if ((portNum >= 41) && (portNum <= 48)) + { + reg_no = portNum - 17;/*24-31*/ + i2c_sfp_client = i2c_client_gpio3; + } + else if ((portNum >= 49) && (portNum <= 54)) + { + printk(KERN_INFO "%s not supported!\n", name); + return sprintf(buf, "%d\n", 0); + } + + dir_bank = (reg_no/8) + 0x18; + ret = e582_48x6q_smbus_write_reg(i2c_sfp_client, dir_bank, 0xff); + if (ret != 0) + { + return sprintf(buf, "Error: read sfp data:%s set dir-ctl failed\n", attr->attr.name); + } + + input_bank = (reg_no/8) + 0x8; + ret = e582_48x6q_smbus_read_reg(i2c_sfp_client, input_bank, &value); + if (ret != 0) + { + return sprintf(buf, "Error: read sfp data:%s failed\n", attr->attr.name); + } + + value = ((value & (1<<(reg_no%8))) ? 0 : 1 ); + + return sprintf(buf, "%d\n", value); +} + +static ssize_t e582_48x6q_sfp_write_enable(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) +{ + int ret = 0; + unsigned char value = 0; + unsigned char set_value = simple_strtol(buf, NULL, 10); + unsigned char reg_no = 0; + unsigned char dir_bank = 0; + unsigned char input_bank = 0; + unsigned char output_bank = 0; + int portNum = 0; + const char *name = dev_name(dev); + struct i2c_client *i2c_sfp_client = NULL; + + sscanf(name, "sfp%d", &portNum); + + if ((portNum < 1) || (portNum > PORT_NUM)) + { + printk(KERN_CRIT "sfp read presence, invalid port number!\n"); + return size; + } + + if ((portNum >= 1) && (portNum <= 8)) + { + reg_no = portNum + 23;/*24-31*/ + i2c_sfp_client = i2c_client_gpio0; + } + else if ((portNum >= 9) && (portNum <= 16)) + { + reg_no = portNum - 1;/*8-15*/ + i2c_sfp_client = i2c_client_gpio1; + } + else if ((portNum >= 17) && (portNum <= 24)) + { + reg_no = portNum + 15;/*32-39*/ + i2c_sfp_client = i2c_client_gpio1; + } + else if ((portNum >= 25) && (portNum <= 32)) + { + reg_no = portNum - 9;/*16-23*/ + i2c_sfp_client = i2c_client_gpio2; + } + else if ((portNum >= 33) && (portNum <= 40)) + { + reg_no = portNum - 33;/*0-7*/ + i2c_sfp_client = i2c_client_gpio3; + } + else if ((portNum >= 41) && (portNum <= 48)) + { + reg_no = portNum - 17;/*24-31*/ + i2c_sfp_client = i2c_client_gpio3; + } + else if ((portNum >= 49) && (portNum <= 54)) + { + printk(KERN_INFO "%s not supported!\n", name); + return size; + } + + set_value = ((set_value > 0) ? 0 : 1 ); + + dir_bank = (reg_no/8) + 0x18; + ret = e582_48x6q_smbus_write_reg(i2c_sfp_client, dir_bank, 0x0); + if (ret != 0) + { + return sprintf(buf, "Error: read sfp data:%s set dir-ctl failed\n", attr->attr.name); + } + + input_bank = (reg_no/8) + 0x8; + ret = e582_48x6q_smbus_read_reg(i2c_sfp_client, input_bank, &value); + if (ret != 0) + { + printk(KERN_CRIT "Error: read %s presence failed\n", name); + return size; + } + + if (set_value) + { + value = (value | (1<<(reg_no % 8))); + } + else + { + value = (value & (~(1<<(reg_no % 8)))); + } + + output_bank = (reg_no/8) + 0x8; + ret = e582_48x6q_smbus_write_reg(i2c_sfp_client, output_bank, value); + if (ret != 0) + { + printk(KERN_CRIT "Error: write %s presence failed\n", name); + return size; + } + + return size; +} + +static DEVICE_ATTR(sfp_presence, S_IRUGO, e582_48x6q_sfp_read_presence, NULL); +static DEVICE_ATTR(sfp_enable, S_IRUGO|S_IWUGO, e582_48x6q_sfp_read_enable, e582_48x6q_sfp_write_enable); +static int e582_48x6q_init_sfp(void) +{ + int ret = 0; + int i = 0; + + sfp_class = class_create(THIS_MODULE, "sfp"); + if (IS_INVALID_PTR(sfp_class)) + { + sfp_class = NULL; + printk(KERN_CRIT "create e582_48x6q class sfp failed\n"); + return -1; + } + + for (i=1; i<=PORT_NUM; i++) + { + sfp_dev[i] = device_create(sfp_class, NULL, MKDEV(223,i), NULL, "sfp%d", i); + if (IS_INVALID_PTR(sfp_dev[i])) + { + sfp_dev[i] = NULL; + printk(KERN_CRIT "create e582_48x6q sfp[%d] device failed\n", i); + continue; + } + + ret = device_create_file(sfp_dev[i], &dev_attr_sfp_presence); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q sfp[%d] device attr:presence failed\n", i); + continue; + } + + ret = device_create_file(sfp_dev[i], &dev_attr_sfp_enable); + if (ret != 0) + { + printk(KERN_CRIT "create e582_48x6q sfp[%d] device attr:enable failed\n", i); + continue; + } + } + + return ret; +} + +static int e582_48x6q_exit_sfp(void) +{ + int i = 0; + + for (i=1; i<=PORT_NUM; i++) + { + if (IS_VALID_PTR(sfp_dev[i])) + { + device_remove_file(sfp_dev[i], &dev_attr_sfp_presence); + device_remove_file(sfp_dev[i], &dev_attr_sfp_enable); + device_destroy(sfp_class, MKDEV(223,i)); + sfp_dev[i] = NULL; + } + } + + if (IS_VALID_PTR(sfp_class)) + { + class_destroy(sfp_class); + sfp_class = NULL; + } + + return 0; +} +#endif + +static int e582_48x6q_init(void) +{ + int ret = 0; + int failed = 0; + + printk(KERN_ALERT "install e582_48x6q board dirver...\n"); + + ret = e582_48x6q_init_i2c_master(); + if (ret != 0) + { + failed = 1; + } + + ret = e582_48x6q_init_i2c_pca9548(); + if (ret != 0) + { + failed = 1; + } + + ret = e582_48x6q_init_i2c_adt7470(); + if (ret != 0) + { + failed = 1; + } + + ret = e582_48x6q_init_i2c_psu(); + if (ret != 0) + { + failed = 1; + } + + ret = e582_48x6q_init_i2c_epld(); + if (ret != 0) + { + failed = 1; + } + + ret = e582_48x6q_init_i2c_gpio(); + if (ret != 0) + { + failed = 1; + } + + ret = e582_48x6q_init_psu(); + if (ret != 0) + { + failed = 1; + } + + ret = e582_48x6q_init_led(); + if (ret != 0) + { + failed = 1; + } + + ret = e582_48x6q_init_sfp(); + if (ret != 0) + { + failed = 1; + } + + if (failed) + printk(KERN_INFO "install e582_48x6q board driver failed\n"); + else + printk(KERN_ALERT "install e582_48x6q board dirver...ok\n"); + + return 0; +} + +static void e582_48x6q_exit(void) +{ + printk(KERN_INFO "uninstall e582_48x6q board dirver...\n"); + + e582_48x6q_exit_sfp(); + e582_48x6q_exit_led(); + e582_48x6q_exit_psu(); + e582_48x6q_exit_i2c_gpio(); + e582_48x6q_exit_i2c_epld(); + e582_48x6q_exit_i2c_psu(); + e582_48x6q_exit_i2c_adt7470(); + e582_48x6q_exit_i2c_pca9548(); + e582_48x6q_exit_i2c_master(); +} + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_AUTHOR("yangbs centecNetworks, Inc"); +MODULE_DESCRIPTION("e582-48x6q board driver"); +module_init(e582_48x6q_init); +module_exit(e582_48x6q_exit); + diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_kernel.c b/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_kernel.c new file mode 100644 index 000000000000..a1315a97159b --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_kernel.c @@ -0,0 +1,1822 @@ +/** + @file dal_kernal.c + + @date 2012-10-18 + + @version v2.0 + + +*/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 0, 0)) +#include +#endif +#include "dal_kernel.h" +#include "dal_mpool.h" + +MODULE_AUTHOR("Centec Networks Inc."); +MODULE_DESCRIPTION("DAL kernel module"); +MODULE_LICENSE("GPL"); + +/* DMA memory pool size */ +static char* dma_pool_size; +module_param(dma_pool_size, charp, 0); +MODULE_PARM_DESC(dma_pool_size, + "Specify DMA memory pool size (default 4MB)"); + +/***************************************************************************** + * defines + *****************************************************************************/ +#define MB_SIZE 0x100000 +#define CTC_MAX_INTR_NUM 8 + +#define MEM_MAP_RESERVE SetPageReserved +#define MEM_MAP_UNRESERVE ClearPageReserved + +#define CTC_VENDOR_VID 0xc001 +#define CTC_HUMBER_DEVICE_ID 0x6048 +#define CTC_GOLDENGATE_DEVICE_ID 0xcb10 + +#define MEM_MAP_RESERVE SetPageReserved +#define MEM_MAP_UNRESERVE ClearPageReserved + +#define CTC_GREATBELT_DEVICE_ID 0x03e8 /* TBD */ +#define DAL_MAX_CHIP_NUM 8 /* [GB] used */ +#define VIRT_TO_PAGE(p) virt_to_page((p)) +#define DAL_UNTAG_BLOCK 0 +#define DAL_DISCARD_BLOCK 1 +#define DAL_MATCHED_BLOCK 2 +#define DAL_CUR_MATCH_BLOCk 3 +/***************************************************************************** + * typedef + *****************************************************************************/ +/* Control Data */ +typedef struct dal_isr_s +{ + int irq; + void (* isr)(void*); + void* isr_data; + int trigger; + int count; + wait_queue_head_t wqh; +} dal_isr_t; + +typedef struct dal_kernel_dev_s +{ + struct list_head list; + struct pci_dev* pci_dev; + + /* PCI I/O mapped base address */ + uintptr logic_address; + + /* Physical address */ + uintptr phys_address; +} dal_kern_dev_t; + +typedef struct _dma_segment +{ + struct list_head list; + unsigned long req_size; /* Requested DMA segment size */ + unsigned long blk_size; /* DMA block size */ + unsigned long blk_order; /* DMA block size in alternate format */ + unsigned long seg_size; /* Current DMA segment size */ + unsigned long seg_begin; /* Logical address of segment */ + unsigned long seg_end; /* Logical end address of segment */ + unsigned long* blk_ptr; /* Array of logical DMA block addresses */ + int blk_cnt_max; /* Maximum number of block to allocate */ + int blk_cnt; /* Current number of blocks allocated */ +} dma_segment_t; + +typedef irqreturn_t (*p_func) (int irq, void* dev_id); + +/*************************************************************************** + *declared + ***************************************************************************/ +static unsigned int linux_dal_poll0(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll1(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll2(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll3(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll4(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll5(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll6(struct file* filp, struct poll_table_struct* p); +static unsigned int linux_dal_poll7(struct file* filp, struct poll_table_struct* p); + +/***************************************************************************** + * global variables + *****************************************************************************/ +static dal_kern_dev_t dal_dev[DAL_MAX_CHIP_NUM]; +static dal_isr_t dal_isr[CTC_MAX_INTR_NUM]; +static int dal_chip_num = 0; +static int dal_version = 0; +static int dal_intr_num = 0; +static int use_high_memory = 0; +static unsigned int* dma_virt_base[DAL_MAX_CHIP_NUM]; +#ifndef DMA_MEM_MODE_PLATFORM +static unsigned int* dma_virt_base_tmp[DAL_MAX_CHIP_NUM]; +#endif +static uintptr dma_phy_base[DAL_MAX_CHIP_NUM]; +static unsigned int dma_mem_size = 0x800000; +static unsigned int msi_irq_base[DAL_MAX_CHIP_NUM]; +static unsigned int msi_irq_num[DAL_MAX_CHIP_NUM]; +static unsigned int msi_used = 0; +static struct class *dal_class; + +static LIST_HEAD(_dma_seg); +static int dal_debug = 0; +module_param(dal_debug, int, 0); +MODULE_PARM_DESC(dal_debug, "Set debug level (default 0)"); + +static struct pci_device_id dal_id_table[] = +{ + {PCI_DEVICE(CTC_VENDOR_VID, CTC_GREATBELT_DEVICE_ID)}, + {PCI_DEVICE(0xcb10, 0xc010)}, + {0, }, +}; + +static wait_queue_head_t poll_intr[CTC_MAX_INTR_NUM]; + +p_func intr_handler_fun[CTC_MAX_INTR_NUM]; + +static int poll_intr_trigger[CTC_MAX_INTR_NUM]; + +static struct file_operations dal_intr_fops[CTC_MAX_INTR_NUM] = +{ + { + .owner = THIS_MODULE, + .poll = linux_dal_poll0, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll1, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll2, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll3, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll4, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll5, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll6, + }, + { + .owner = THIS_MODULE, + .poll = linux_dal_poll7, + }, +}; + +/***************************************************************************** + * macros + *****************************************************************************/ +#define VERIFY_CHIP_INDEX(n) (n < dal_chip_num) + +#define _KERNEL_INTERUPT_PROCESS +static irqreturn_t +intr0_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + + if(poll_intr_trigger[0]) + { + return IRQ_HANDLED; + } + + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[0] = 1; + wake_up(&poll_intr[0]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr1_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[1]) + { + return IRQ_HANDLED; + } + + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[1] = 1; + wake_up(&poll_intr[1]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr2_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[2]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[2] = 1; + wake_up(&poll_intr[2]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr3_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[3]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[3] = 1; + wake_up(&poll_intr[3]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr4_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[4]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[4] = 1; + wake_up(&poll_intr[4]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr5_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[5]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[5] = 1; + wake_up(&poll_intr[5]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr6_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[6]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[6] = 1; + wake_up(&poll_intr[6]); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t +intr7_handler(int irq, void* dev_id) +{ + dal_isr_t* p_dal_isr = (dal_isr_t*)dev_id; + if(poll_intr_trigger[7]) + { + return IRQ_HANDLED; + } + disable_irq_nosync(irq); + + if (p_dal_isr) + { + if (p_dal_isr->isr) + { + /* kernel mode interrupt handler */ + p_dal_isr->isr(p_dal_isr->isr_data); + } + else if ((NULL == p_dal_isr->isr) && (NULL == p_dal_isr->isr_data)) + { + /* user mode interrupt handler */ + poll_intr_trigger[7] = 1; + wake_up(&poll_intr[7]); + } + } + + return IRQ_HANDLED; +} + +int +dal_interrupt_register(unsigned int irq, int prio, void (* isr)(void*), void* data) +{ + int ret; + unsigned char str[16]; + unsigned char* int_name = NULL; + unsigned int intr_num_tmp = 0; + unsigned int intr_num = CTC_MAX_INTR_NUM; + unsigned long irq_flags = 0; + + if (dal_intr_num >= CTC_MAX_INTR_NUM) + { + printk("Interrupt numbers exceeds max.\n"); + return -1; + } + + if (msi_used) + { + int_name = "dal_msi"; + } + else + { + int_name = "dal_intr"; + } + + + for (intr_num_tmp=0;intr_num_tmp < CTC_MAX_INTR_NUM; intr_num_tmp++) + { + if (irq == dal_isr[intr_num_tmp].irq) + { + dal_isr[intr_num_tmp].count++; + printk("Interrupt irq %d register count %d.\n", irq, dal_isr[intr_num_tmp].count); + return 0; + } + if ((0 == dal_isr[intr_num_tmp].irq) && (CTC_MAX_INTR_NUM == intr_num)) + { + intr_num = intr_num_tmp; + dal_isr[intr_num].count = 0; + } + } + dal_isr[intr_num].irq = irq; + dal_isr[intr_num].isr = isr; + dal_isr[intr_num].isr_data = data; + dal_isr[intr_num].count++; + + init_waitqueue_head(&poll_intr[intr_num]); + + /* only user mode */ + if ((NULL == isr) && (NULL == data)) + { + snprintf(str, 16, "%s%d", "dal_intr", intr_num); + ret = register_chrdev(DAL_DEV_INTR_MAJOR_BASE + intr_num, + str, &dal_intr_fops[intr_num]); + if (ret < 0) + { + printk("Register character device for irq %d failed, ret= %d", irq, ret); + return ret; + } + } +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 1, 0)) + irq_flags = 0; +#else + irq_flags = IRQF_DISABLED; +#endif + if ((ret = request_irq(irq, + intr_handler_fun[intr_num], + irq_flags, + int_name, + &dal_isr[intr_num])) < 0) + { + printk("Cannot request irq %d, ret %d.\n", irq, ret); + unregister_chrdev(DAL_DEV_INTR_MAJOR_BASE + intr_num, str); + } + + if (0 == ret) + { + dal_intr_num++; + } + + return ret; +} + +int +dal_interrupt_unregister(unsigned int irq) +{ + unsigned char str[16]; + int intr_idx = 0; + int find_flag = 0; + + /* get intr device index */ + for (intr_idx = 0; intr_idx < CTC_MAX_INTR_NUM; intr_idx++) + { + if (dal_isr[intr_idx].irq == irq) + { + find_flag = 1; + break; + } + } + + if (find_flag == 0) + { + printk ("irq%d is not registered! unregister failed \n", irq); + return -1; + } + + dal_isr[intr_idx].count--; + if (0 != dal_isr[intr_idx].count) + { + printk("Interrupt irq %d unregister count %d.\n", irq, dal_isr[intr_idx].count); + return -1; + } + snprintf(str, 16, "%s%d", "dal_intr", intr_idx); + + unregister_chrdev(DAL_DEV_INTR_MAJOR_BASE + intr_idx, str); + + free_irq(irq, &dal_isr[intr_idx]); + + dal_isr[intr_idx].irq = 0; + + dal_intr_num--; + + return 0; +} + +int +dal_interrupt_set_en(unsigned int irq, unsigned int enable) +{ + enable ? enable_irq(irq) : disable_irq_nosync(irq); + return 0; +} + +static int +_dal_set_msi_enabe(unsigned int lchip, unsigned int irq_num) +{ + int ret = 0; + + if (irq_num == 1) + { + if (msi_irq_base[lchip]) + { + dal_interrupt_unregister(msi_irq_base[lchip]); + pci_disable_msi(dal_dev[lchip].pci_dev); + msi_used = 0; + msi_irq_base[lchip] = 0; + msi_irq_num[lchip] = 0; + } + ret = pci_enable_msi(dal_dev[lchip].pci_dev); + if (ret) + { + printk ("msi enable failed!!! lchip = %d, irq_num = %d\n", lchip, irq_num); + pci_disable_msi(dal_dev[lchip].pci_dev); + msi_used = 0; + } + + msi_irq_base[lchip] = dal_dev[lchip].pci_dev->irq; + msi_irq_num[lchip] = 1; + } + else + { +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 14, 79)) + ret = pci_enable_msi_exact(dal_dev[lchip].pci_dev, irq_num); +#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 26, 32)) + ret = pci_enable_msi_block(dal_dev[lchip].pci_dev, irq_num); +#else + ret = -1; +#endif + if (ret) + { + printk ("msi enable failed!!! lchip = %d, irq_num = %d\n", lchip, irq_num); + pci_disable_msi(dal_dev[lchip].pci_dev); + msi_used = 0; + } + + msi_irq_base[lchip] = dal_dev[lchip].pci_dev->irq; + msi_irq_num[lchip] = irq_num; + } + + return ret; +} + +static int +_dal_set_msi_disable(unsigned int lchip) +{ + + pci_disable_msi(dal_dev[lchip].pci_dev); + + msi_irq_base[lchip] = 0; + msi_irq_num[lchip] = 0; + + return 0; +} + +int +dal_set_msi_cap(unsigned long arg) +{ + int ret = 0; + dal_msi_info_t msi_info; + + if (copy_from_user(&msi_info, (void*)arg, sizeof(dal_msi_info_t))) + { + return -EFAULT; + } + + printk("####dal_set_msi_cap lchip %d base %d num:%d\n", msi_info.lchip, msi_info.irq_base, msi_info.irq_num); + if (msi_info.irq_num > 0) + { + msi_used = 1; + ret = _dal_set_msi_enabe(msi_info.lchip, msi_info.irq_num); + } + else + { + msi_used = 0; + ret = _dal_set_msi_disable(msi_info.lchip); + } + + return ret; +} + +int +dal_user_interrupt_register(unsigned long arg) +{ + int irq = 0; + if (copy_from_user(&irq, (void*)arg, sizeof(int))) + { + return -EFAULT; + } + printk("####register interrupt irq:%d\n", irq); + return dal_interrupt_register(irq, 0, NULL, NULL); +} + +int +dal_user_interrupt_unregister(unsigned long arg) +{ + int irq = 0; + if (copy_from_user(&irq, (void*)arg, sizeof(int))) + { + return -EFAULT; + } + printk("####unregister interrupt irq:%d\n", irq); + return dal_interrupt_unregister(irq); +} + +int +dal_user_interrupt_set_en(unsigned long arg) +{ + dal_intr_parm_t dal_intr_parm; + + if (copy_from_user(&dal_intr_parm, (void*)arg, sizeof(dal_intr_parm_t))) + { + return -EFAULT; + } + + return dal_interrupt_set_en(dal_intr_parm.irq, dal_intr_parm.enable); +} + +/* + * Function: _dal_dma_segment_free + */ + +/* + * Function: _find_largest_segment + * + * Purpose: + * Find largest contiguous segment from a pool of DMA blocks. + * Parameters: + * dseg - DMA segment descriptor + * Returns: + * 0 on success, < 0 on error. + * Notes: + * Assembly stops if a segment of the requested segment size + * has been obtained. + * + * Lower address bits of the DMA blocks are used as follows: + * 0: Untagged + * 1: Discarded block + * 2: Part of largest contiguous segment + * 3: Part of current contiguous segment + */ +#ifndef DMA_MEM_MODE_PLATFORM +static int +_dal_find_largest_segment(dma_segment_t* dseg) +{ + int i, j, blks, found; + unsigned long seg_begin; + unsigned long seg_end; + unsigned long seg_tmp; + + blks = dseg->blk_cnt; + + /* Clear all block tags */ + for (i = 0; i < blks; i++) + { + dseg->blk_ptr[i] &= ~3; + } + + for (i = 0; i < blks && dseg->seg_size < dseg->req_size; i++) + { + /* First block must be an untagged block */ + if ((dseg->blk_ptr[i] & 3) == DAL_UNTAG_BLOCK) + { + /* Initial segment size is the block size */ + seg_begin = dseg->blk_ptr[i]; + seg_end = seg_begin + dseg->blk_size; + dseg->blk_ptr[i] |= DAL_CUR_MATCH_BLOCk; + + /* Loop looking for adjacent blocks */ + do + { + found = 0; + + for (j = i + 1; j < blks && (seg_end - seg_begin) < dseg->req_size; j++) + { + seg_tmp = dseg->blk_ptr[j]; + /* Check untagged blocks only */ + if ((seg_tmp & 3) == DAL_UNTAG_BLOCK) + { + if (seg_tmp == (seg_begin - dseg->blk_size)) + { + /* Found adjacent block below current segment */ + dseg->blk_ptr[j] |= DAL_CUR_MATCH_BLOCk; + seg_begin = seg_tmp; + found = 1; + } + else if (seg_tmp == seg_end) + { + /* Found adjacent block above current segment */ + dseg->blk_ptr[j] |= DAL_CUR_MATCH_BLOCk; + seg_end += dseg->blk_size; + found = 1; + } + } + } + } + while (found); + + if ((seg_end - seg_begin) > dseg->seg_size) + { + /* The current block is largest so far */ + dseg->seg_begin = seg_begin; + dseg->seg_end = seg_end; + dseg->seg_size = seg_end - seg_begin; + + /* Re-tag current and previous largest segment */ + for (j = 0; j < blks; j++) + { + if ((dseg->blk_ptr[j] & 3) == DAL_CUR_MATCH_BLOCk) + { + /* Tag current segment as the largest */ + dseg->blk_ptr[j] &= ~1; + } + else if ((dseg->blk_ptr[j] & 3) == DAL_MATCHED_BLOCK) + { + /* Discard previous largest segment */ + dseg->blk_ptr[j] ^= 3; + } + } + } + else + { + /* Discard all blocks in current segment */ + for (j = 0; j < blks; j++) + { + if ((dseg->blk_ptr[j] & 3) == DAL_CUR_MATCH_BLOCk) + { + dseg->blk_ptr[j] &= ~2; + } + } + } + } + } + + return 0; +} + +/* + * Function: _alloc_dma_blocks + */ +static int +_dal_alloc_dma_blocks(dma_segment_t* dseg, int blks) +{ + int i, start; + unsigned long addr; + + if (dseg->blk_cnt + blks > dseg->blk_cnt_max) + { + printk("No more DMA blocks\n"); + return -1; + } + + start = dseg->blk_cnt; + dseg->blk_cnt += blks; + + for (i = start; i < dseg->blk_cnt; i++) + { + addr = __get_free_pages(GFP_ATOMIC, dseg->blk_order); + if (addr) + { + dseg->blk_ptr[i] = addr; + } + else + { + printk("DMA allocation failed\n"); + return -1; + } + } + + return 0; +} + +/* + * Function: _dal_dma_segment_alloc + */ +static dma_segment_t* +_dal_dma_segment_alloc(unsigned int size, unsigned int blk_size) +{ + dma_segment_t* dseg; + int i, blk_ptr_size; + unsigned long page_addr; + struct sysinfo si; + + /* Sanity check */ + if (size == 0 || blk_size == 0) + { + return NULL; + } + + /* Allocate an initialize DMA segment descriptor */ + if ((dseg = kmalloc(sizeof(dma_segment_t), GFP_ATOMIC)) == NULL) + { + return NULL; + } + + memset(dseg, 0, sizeof(dma_segment_t)); + dseg->req_size = size; + dseg->blk_size = PAGE_ALIGN(blk_size); + + while ((PAGE_SIZE << dseg->blk_order) < dseg->blk_size) + { + dseg->blk_order++; + } + + si_meminfo(&si); + dseg->blk_cnt_max = (si.totalram << PAGE_SHIFT) / dseg->blk_size; + blk_ptr_size = dseg->blk_cnt_max * sizeof(unsigned long); + /* Allocate an initialize DMA block pool */ + dseg->blk_ptr = kmalloc(blk_ptr_size, GFP_KERNEL); + if (dseg->blk_ptr == NULL) + { + kfree(dseg); + return NULL; + } + + memset(dseg->blk_ptr, 0, blk_ptr_size); + /* Allocate minimum number of blocks */ + _dal_alloc_dma_blocks(dseg, dseg->req_size / dseg->blk_size); + + /* Allocate more blocks until we have a complete segment */ + do + { + _dal_find_largest_segment(dseg); + if (dseg->seg_size >= dseg->req_size) + { + break; + } + } + while (_dal_alloc_dma_blocks(dseg, 8) == 0); + + /* Reserve all pages in the DMA segment and free unused blocks */ + for (i = 0; i < dseg->blk_cnt; i++) + { + if ((dseg->blk_ptr[i] & 3) == 2) + { + dseg->blk_ptr[i] &= ~3; + + for (page_addr = dseg->blk_ptr[i]; + page_addr < dseg->blk_ptr[i] + dseg->blk_size; + page_addr += PAGE_SIZE) + { + MEM_MAP_RESERVE(VIRT_TO_PAGE((void*)page_addr)); + } + } + else if (dseg->blk_ptr[i]) + { + dseg->blk_ptr[i] &= ~3; + free_pages(dseg->blk_ptr[i], dseg->blk_order); + dseg->blk_ptr[i] = 0; + } + } + + return dseg; +} + +/* + * Function: _dal_dma_segment_free + */ +static void +_dal_dma_segment_free(dma_segment_t* dseg) +{ + int i; + unsigned long page_addr; + + if (dseg->blk_ptr) + { + for (i = 0; i < dseg->blk_cnt; i++) + { + if (dseg->blk_ptr[i]) + { + for (page_addr = dseg->blk_ptr[i]; + page_addr < dseg->blk_ptr[i] + dseg->blk_size; + page_addr += PAGE_SIZE) + { + MEM_MAP_UNRESERVE(VIRT_TO_PAGE(page_addr)); + } + + free_pages(dseg->blk_ptr[i], dseg->blk_order); + } + } + + kfree(dseg->blk_ptr); + kfree(dseg); + } +} + +/* + * Function: -dal_pgalloc + */ +static void* +_dal_pgalloc(unsigned int size) +{ + dma_segment_t* dseg; + unsigned int blk_size; + + blk_size = (size < DMA_BLOCK_SIZE) ? size : DMA_BLOCK_SIZE; + if ((dseg = _dal_dma_segment_alloc(size, blk_size)) == NULL) + { + return NULL; + } + + if (dseg->seg_size < size) + { + /* If we didn't get the full size then forget it */ + printk("Notice: Can not get enough memory for requset!!\n"); + printk("actual size:0x%lx, request size:0x%x\n", dseg->seg_size, size); + //-_dal_dma_segment_free(dseg); + //-return NULL; + } + + list_add(&dseg->list, &_dma_seg); + return (void*)dseg->seg_begin; +} + +/* + * Function: _dal_pgfree + */ +static int +_dal_pgfree(void* ptr) +{ + struct list_head* pos; + + list_for_each(pos, &_dma_seg) + { + dma_segment_t* dseg = list_entry(pos, dma_segment_t, list); + if (ptr == (void*)dseg->seg_begin) + { + list_del(&dseg->list); + _dal_dma_segment_free(dseg); + return 0; + } + } + return -1; +} +#endif +static void +dal_alloc_dma_pool(int lchip, int size) +{ + if (use_high_memory) + { + dma_phy_base[lchip] = virt_to_bus(high_memory); + dma_virt_base[lchip] = ioremap_nocache(dma_phy_base[lchip], size); + } + else + { +#ifdef DMA_MEM_MODE_PLATFORM + dma_virt_base[lchip] = dma_alloc_coherent(&(dal_dev[lchip].pci_dev->dev), dma_mem_size, + &dma_phy_base[lchip], GFP_KERNEL); + + printk(KERN_WARNING "########Using DMA_MEM_MODE_PLATFORM \n"); +#endif + +#ifndef DMA_MEM_MODE_PLATFORM + /* Get DMA memory from kernel */ + dma_virt_base_tmp[lchip] = _dal_pgalloc(size); + dma_phy_base[lchip] = virt_to_bus(dma_virt_base_tmp[lchip]); + dma_virt_base [lchip]= ioremap_nocache(dma_phy_base[lchip], size); +#endif + } +} + +static void +dal_free_dma_pool(int lchip) +{ + int ret = 0; + ret = ret; + if (use_high_memory) + { + iounmap(dma_virt_base[lchip]); + } + else + { +#ifdef DMA_MEM_MODE_PLATFORM + dma_free_coherent(&(dal_dev[lchip].pci_dev->dev), dma_mem_size, + dma_virt_base[lchip], dma_phy_base[lchip]); +#endif + +#ifndef DMA_MEM_MODE_PLATFORM + iounmap(dma_virt_base[lchip]); + ret = _dal_pgfree(dma_virt_base_tmp[lchip]); + if(ret<0) + { + printk("Dma free memory fail !!!!!! \n"); + } +#endif + } +} + +#define _KERNEL_DAL_IO +static int +_dal_pci_read(unsigned char lchip, unsigned int offset, unsigned int* value) +{ + if (!VERIFY_CHIP_INDEX(lchip)) + { + return -1; + } + + *value = *(volatile unsigned int*)(dal_dev[lchip].logic_address + offset); + return 0; +} + +int +dal_create_irq_mapping(unsigned long arg) +{ +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4, 0, 0)) + dal_irq_mapping_t irq_map; + + if (copy_from_user(&irq_map, (void*)arg, sizeof(dal_irq_mapping_t))) + { + return -EFAULT; + } + + irq_map.sw_irq = irq_create_mapping(NULL, irq_map.hw_irq); + if (irq_map.sw_irq == NO_IRQ) + { + printk("IRQ mapping fail !!!!!! \n"); + return -1; + } + + if (copy_to_user((dal_irq_mapping_t*)arg, (void*)&irq_map, sizeof(dal_irq_mapping_t))) + { + return -EFAULT; + } +#endif + return 0; +} + +int +dal_pci_read(unsigned long arg) +{ + dal_chip_parm_t cmdpara_chip; + + if (copy_from_user(&cmdpara_chip, (void*)arg, sizeof(dal_chip_parm_t))) + { + return -EFAULT; + } + + _dal_pci_read((unsigned char)cmdpara_chip.chip_id, (unsigned int)cmdpara_chip.reg_addr, + (unsigned int*)(&(cmdpara_chip.value))); + + if (copy_to_user((dal_chip_parm_t*)arg, (void*)&cmdpara_chip, sizeof(dal_chip_parm_t))) + { + return -EFAULT; + } + + return 0; +} + +static int +_dal_pci_write(unsigned char lchip, unsigned int offset, unsigned int value) +{ + if (!VERIFY_CHIP_INDEX(lchip)) + { + return -1; + } + + *(volatile unsigned int*)(dal_dev[lchip].logic_address + offset) = value; + return 0; +} + +int +dal_pci_write(unsigned long arg) +{ + dal_chip_parm_t cmdpara_chip; + + if (copy_from_user(&cmdpara_chip, (void*)arg, sizeof(dal_chip_parm_t))) + { + return -EFAULT; + } + + _dal_pci_write((unsigned char)cmdpara_chip.chip_id, (unsigned int)cmdpara_chip.reg_addr, + (unsigned int)cmdpara_chip.value); + + return 0; +} + +int +dal_pci_conf_read(unsigned char lchip, unsigned int offset, unsigned int* value) +{ + if (!VERIFY_CHIP_INDEX(lchip)) + { + return -1; + } + + pci_read_config_dword(dal_dev[lchip].pci_dev, offset, value); + return 0; +} + +int +dal_pci_conf_write(unsigned char lchip, unsigned int offset, unsigned int value) +{ + if (!VERIFY_CHIP_INDEX(lchip)) + { + return -1; + } + + pci_write_config_dword(dal_dev[lchip].pci_dev, offset, value); + return 0; +} +int +dal_user_read_pci_conf(unsigned long arg) +{ + dal_pci_cfg_ioctl_t dal_cfg; + + if (copy_from_user(&dal_cfg, (void*)arg, sizeof(dal_pci_cfg_ioctl_t))) + { + return -EFAULT; + } + + if (dal_pci_conf_read(dal_cfg.chip_id, dal_cfg.offset, &dal_cfg.value)) + { + printk("dal_pci_conf_read failed.\n"); + return -EFAULT; + } + + if (copy_to_user((dal_pci_cfg_ioctl_t*)arg, (void*)&dal_cfg, sizeof(dal_pci_cfg_ioctl_t))) + { + return -EFAULT; + } + + return 0; +} + +int +dal_user_write_pci_conf(unsigned long arg) +{ + dal_pci_cfg_ioctl_t dal_cfg; + + if (copy_from_user(&dal_cfg, (void*)arg, sizeof(dal_pci_cfg_ioctl_t))) + { + return -EFAULT; + } + + return dal_pci_conf_write(dal_cfg.chip_id, dal_cfg.offset, dal_cfg.value); +} + +static int +linux_get_device(unsigned long arg) +{ + dal_user_dev_t user_dev; + int chip_id = 0; + + if (copy_from_user(&user_dev, (void*)arg, sizeof(user_dev))) + { + return -EFAULT; + } + + user_dev.chip_num = dal_chip_num; + chip_id = user_dev.chip_id; + + if (chip_id < dal_chip_num) + { + user_dev.phy_base0 = (unsigned int)dal_dev[chip_id].phys_address; + #ifdef PHYS_ADDR_IS_64BIT + user_dev.phy_base1 = (unsigned int)(dal_dev[chip_id].phys_address >> 32); + #else + user_dev.phy_base1 = 0; + #endif + + user_dev.bus_no = dal_dev[chip_id].pci_dev->bus->number; + user_dev.dev_no = dal_dev[chip_id].pci_dev->device; + user_dev.fun_no = dal_dev[chip_id].pci_dev->devfn; + } + + if (copy_to_user((dal_user_dev_t*)arg, (void*)&user_dev, sizeof(user_dev))) + { + return -EFAULT; + } + + return 0; +} + +/* set dal version, copy to user */ +static int +linux_get_dal_version(unsigned long arg) +{ + int dal_ver = VERSION_1DOT2; /* set dal version */ + + if (copy_to_user((int*)arg, (void*)&dal_ver, sizeof(dal_ver))) + { + return -EFAULT; + } + + dal_version = dal_ver; /* up sw */ + + return 0; +} + +static int +linux_get_dma_info(unsigned long arg) +{ + dma_info_t dma_para; + + if (copy_from_user(&dma_para, (void*)arg, sizeof(dma_info_t))) + { + return -EFAULT; + } + + dma_para.phy_base = (unsigned int)dma_phy_base[dma_para.lchip]; + #ifdef PHYS_ADDR_IS_64BIT + dma_para.phy_base_hi = dma_phy_base[dma_para.lchip] >> 32; + #else + dma_para.phy_base_hi = 0; + #endif + dma_para.size = dma_mem_size; + + if (copy_to_user((dma_info_t*)arg, (void*)&dma_para, sizeof(dma_info_t))) + { + return -EFAULT; + } + + return 0; +} + +static int +dal_get_msi_info(unsigned long arg) +{ + dal_msi_info_t msi_para; + unsigned int lchip = 0; + + /* get lchip form user mode */ + if (copy_from_user(&msi_para, (void*)arg, sizeof(dal_msi_info_t))) + { + return -EFAULT; + } + lchip = msi_para.lchip; + + msi_para.irq_base = msi_irq_base[lchip]; + msi_para.irq_num = msi_irq_num[lchip]; + + /* send msi info to user mode */ + if (copy_to_user((dal_msi_info_t*)arg, (void*)&msi_para, sizeof(dal_msi_info_t))) + { + return -EFAULT; + } + + return 0; +} + + +static int +dal_get_intr_info(unsigned long arg) +{ + dal_intr_info_t intr_para; + unsigned int intr_num = 0; + + /* get lchip form user mode */ + if (copy_from_user(&intr_para, (void*)arg, sizeof(dal_intr_info_t))) + { + return -EFAULT; + } + + intr_para.irq_idx = CTC_MAX_INTR_NUM; + for (intr_num=0; intr_num< CTC_MAX_INTR_NUM; intr_num++) + { + if (intr_para.irq == dal_isr[intr_num].irq) + { + intr_para.irq_idx = intr_num; + break; + } + } + + if (CTC_MAX_INTR_NUM == intr_para.irq_idx) + { + printk("Interrupt %d cann't find.\n", intr_para.irq); + } + /* send msi info to user mode */ + if (copy_to_user((dal_intr_info_t*)arg, (void*)&intr_para, sizeof(dal_intr_info_t))) + { + return -EFAULT; + } + + return 0; +} + +static int +dal_cache_inval(unsigned long arg) +{ + dal_dma_cache_info_t intr_para; + + if (copy_from_user(&intr_para, (void*)arg, sizeof(dal_dma_cache_info_t))) + { + return -EFAULT; + } + +#if 0 + dma_cache_wback_inv((unsigned long)intr_para.ptr, intr_para.length); +#endif + +#if 0 + dma_sync_single_for_cpu(NULL, intr_para.ptr, intr_para.length, DMA_BIDIRECTIONAL); +#endif + + dma_cache_sync(NULL, (void*)intr_para.ptr, intr_para.length, DMA_BIDIRECTIONAL); + + return 0; +} + +static int +dal_cache_flush(unsigned long arg) +{ + dal_dma_cache_info_t intr_para; + + if (copy_from_user(&intr_para, (void*)arg, sizeof(dal_dma_cache_info_t))) + { + return -EFAULT; + } + +#if 0 + dma_cache_wback_inv(intr_para.ptr, intr_para.length); +#endif + +#if 0 + dma_sync_single_for_cpu(NULL, intr_para.ptr, intr_para.length, DMA_BIDIRECTIONAL); +#endif + + dma_cache_sync(NULL, (void*)intr_para.ptr, intr_para.length, DMA_BIDIRECTIONAL); + + return 0; +} + +int +linux_dal_probe(struct pci_dev* pdev, const struct pci_device_id* id) +{ + dal_kern_dev_t* dev = NULL; + int bar = 0; + int ret = 0; + unsigned int temp = 0; + unsigned int lchip = 0; + unsigned int chip_id = 0; + + printk(KERN_WARNING "********found dal device*****\n"); + + for (chip_id = 0; chip_id < DAL_MAX_CHIP_NUM; chip_id ++) + { + if (NULL == dal_dev[chip_id].pci_dev) + { + break; + } + } + + if (chip_id >= DAL_MAX_CHIP_NUM) + { + printk("Exceed max local chip num\n"); + return -1; + } + + dev = &dal_dev[chip_id]; + if (NULL == dev) + { + printk("Cannot obtain PCI resources\n"); + } + + lchip = chip_id; + dal_chip_num += 1; + + dev->pci_dev = pdev; + + if (pci_enable_device(pdev) < 0) + { + printk("Cannot enable PCI device: vendor id = %x, device id = %x\n", + pdev->vendor, pdev->device); + } + + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (ret) + { + ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (ret) + { + printk("Could not set PCI DMA Mask\n"); + return ret; + } + } + + if (pci_request_regions(pdev, DAL_NAME) < 0) + { + printk("Cannot obtain PCI resources\n"); + } + + dev->phys_address = pci_resource_start(pdev, bar); + dev->logic_address = (uintptr)ioremap_nocache(dev->phys_address, + pci_resource_len(dev->pci_dev, bar)); + + _dal_pci_read(lchip, 0x48, &temp); + if (((temp >> 8) & 0xffff) == 0x3412) + { + printk("Little endian Cpu detected!!! \n"); + _dal_pci_write(lchip, 0x48, 0xFFFFFFFF); + } + + pci_set_master(pdev); + + /* alloc dma_mem_size for every chip */ + if (dma_mem_size) + { + dal_alloc_dma_pool(lchip, dma_mem_size); + #ifdef PHYS_ADDR_IS_64BIT + + /*add check Dma memory pool cannot cross 4G space*/ + if ((0==(dma_phy_base[lchip]>>32)) && (0!=((dma_phy_base[lchip]+dma_mem_size)>>32))) + { + printk("Dma malloc memory cross 4G space!!!!!! \n"); + return -1; + } + #endif + } + + printk(KERN_WARNING "linux_dal_probe end*****\n"); + + return 0; +} + +void +linux_dal_remove(struct pci_dev* pdev) +{ + unsigned int chip_id = 0; + unsigned int flag = 0; + + for (chip_id = 0; chip_id < DAL_MAX_CHIP_NUM; chip_id ++) + { + if (pdev == dal_dev[chip_id].pci_dev) + { + flag = 1; + break; + } + } + + if (1 == flag) + { + dal_free_dma_pool(chip_id); + pci_release_regions(pdev); + pci_disable_device(pdev); + + dal_dev[chip_id].pci_dev = NULL; + dal_chip_num--; + } + + +} + +#ifdef CONFIG_COMPAT +static long +linux_dal_ioctl(struct file* file, + unsigned int cmd, unsigned long arg) +#else + +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 8, 13)) +static int +linux_dal_ioctl(struct file* file, + unsigned int cmd, unsigned long arg) +#else +static int +linux_dal_ioctl(struct inode* inode, struct file* file, + unsigned int cmd, unsigned long arg) +#endif + +#endif +{ + switch (cmd) + { + + case CMD_READ_CHIP: + return dal_pci_read(arg); + + case CMD_WRITE_CHIP: + return dal_pci_write(arg); + + case CMD_GET_DEVICES: + return linux_get_device(arg); + + case CMD_GET_DAL_VERSION: + return linux_get_dal_version(arg); + + case CMD_GET_DMA_INFO: + return linux_get_dma_info(arg); + + case CMD_PCI_CONFIG_READ: + return dal_user_read_pci_conf(arg); + + case CMD_PCI_CONFIG_WRITE: + return dal_user_write_pci_conf(arg); + + case CMD_REG_INTERRUPTS: + return dal_user_interrupt_register(arg); + + case CMD_UNREG_INTERRUPTS: + return dal_user_interrupt_unregister(arg); + + case CMD_EN_INTERRUPTS: + return dal_user_interrupt_set_en(arg); + + case CMD_SET_MSI_CAP: + return dal_set_msi_cap(arg); + + case CMD_GET_MSI_INFO: + return dal_get_msi_info(arg); + + case CMD_IRQ_MAPPING: + return dal_create_irq_mapping(arg); + + case CMD_GET_INTR_INFO: + return dal_get_intr_info(arg); + + case CMD_CACHE_INVAL: + return dal_cache_inval(arg); + + case CMD_CACHE_FLUSH: + return dal_cache_flush(arg); + + default: + break; + } + + return 0; +} + +static unsigned int +linux_dal_poll0(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[0], p); + local_irq_save(flags); + if (poll_intr_trigger[0]) + { + poll_intr_trigger[0] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll1(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[1], p); + local_irq_save(flags); + if (poll_intr_trigger[1]) + { + poll_intr_trigger[1] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll2(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[2], p); + local_irq_save(flags); + if (poll_intr_trigger[2]) + { + poll_intr_trigger[2] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll3(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[3], p); + local_irq_save(flags); + if (poll_intr_trigger[3]) + { + poll_intr_trigger[3] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll4(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[4], p); + local_irq_save(flags); + if (poll_intr_trigger[4]) + { + poll_intr_trigger[4] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll5(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[5], p); + local_irq_save(flags); + if (poll_intr_trigger[5]) + { + poll_intr_trigger[5] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll6(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[6], p); + local_irq_save(flags); + if (poll_intr_trigger[6]) + { + poll_intr_trigger[6] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static unsigned int +linux_dal_poll7(struct file* filp, struct poll_table_struct* p) +{ + unsigned int mask = 0; + unsigned long flags; + + poll_wait(filp, &poll_intr[7], p); + local_irq_save(flags); + if (poll_intr_trigger[7]) + { + poll_intr_trigger[7] = 0; + mask |= POLLIN | POLLRDNORM; + } + + local_irq_restore(flags); + + return mask; +} + +static struct pci_driver linux_dal_driver = +{ + .name = DAL_NAME, + .id_table = dal_id_table, + .probe = linux_dal_probe, + .remove = linux_dal_remove, +}; + +static struct file_operations fops = +{ + .owner = THIS_MODULE, +#ifdef CONFIG_COMPAT + .compat_ioctl = linux_dal_ioctl, + .unlocked_ioctl = linux_dal_ioctl, +#else +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 36)) + .unlocked_ioctl = linux_dal_ioctl, +#else + .ioctl = linux_dal_ioctl, +#endif +#endif +}; + + +static int __init +linux_dal_init(void) +{ + int ret = 0; + + /* Get DMA memory pool size form dal.ok input param, or use default dma_mem_size */ + if (dma_pool_size) + { + if ((dma_pool_size[strlen(dma_pool_size) - 1] & ~0x20) == 'M') + { + dma_mem_size = simple_strtoul(dma_pool_size, NULL, 0); + printk("dma_mem_size: 0x%x \n", dma_mem_size); + + dma_mem_size *= MB_SIZE; + } + else + { + printk("DMA memory pool size must be specified as e.g. dma_pool_size=8M\n"); + } + + if (dma_mem_size & (dma_mem_size - 1)) + { + printk("dma_mem_size must be a power of 2 (1M, 2M, 4M, 8M etc.)\n"); + dma_mem_size = 0; + } + } + + ret = register_chrdev(DAL_DEV_MAJOR, DAL_NAME, &fops); + if (ret < 0) + { + printk(KERN_WARNING "Register linux_dal device, ret %d\n", ret); + return ret; + } + + ret = pci_register_driver(&linux_dal_driver); + if (ret < 0) + { + printk(KERN_WARNING "Register ASIC PCI driver failed, ret %d\n", ret); + return ret; + } + + /* alloc /dev/linux_dal node */ + dal_class = class_create(THIS_MODULE, DAL_NAME); + device_create(dal_class, NULL, MKDEV(DAL_DEV_MAJOR, 0), NULL, DAL_NAME); + + /* init interrupt function */ + intr_handler_fun[0] = intr0_handler; + intr_handler_fun[1] = intr1_handler; + intr_handler_fun[2] = intr2_handler; + intr_handler_fun[3] = intr3_handler; + intr_handler_fun[4] = intr4_handler; + intr_handler_fun[5] = intr5_handler; + intr_handler_fun[6] = intr6_handler; + intr_handler_fun[7] = intr7_handler; + + return ret; +} + +static void __exit +linux_dal_exit(void) +{ + device_destroy(dal_class, MKDEV(DAL_DEV_MAJOR, 0)); + class_destroy(dal_class); + unregister_chrdev(DAL_DEV_MAJOR, "linux_dal"); + pci_unregister_driver(&linux_dal_driver); +} + +module_init(linux_dal_init); +module_exit(linux_dal_exit); + diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_kernel.h b/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_kernel.h new file mode 100644 index 000000000000..de39af67773b --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_kernel.h @@ -0,0 +1,170 @@ +/** + @file dal_kernel_io.h + + @author Copyright (C) 2012 Centec Networks Inc. All rights reserved. + + @date 2012-4-9 + + @version v2.0 + +*/ +#ifndef _DAL_KERNEL_H_ +#define _DAL_KERNEL_H_ +#ifdef __cplusplus +extern "C" { +#endif + +#if defined(CONFIG_RESOURCES_64BIT) || defined(CONFIG_PHYS_ADDR_T_64BIT) +#define PHYS_ADDR_IS_64BIT +#endif + +#ifndef SDK_IN_USERMODE +#ifdef PHYS_ADDR_IS_64BIT +typedef long long intptr; +typedef unsigned long long uintptr; +#else +typedef int intptr; +typedef unsigned int uintptr; +#endif +#endif + +#define DAL_PCI_READ_ADDR 0x0 +#define DAL_PCI_READ_DATA 0xc +#define DAL_PCI_WRITE_ADDR 0x8 +#define DAL_PCI_WRITE_DATA 0x4 +#define DAL_PCI_STATUS 0x10 + +#define DAL_PCI_STATUS_IN_PROCESS 31 +#define DAL_PCI_STATUS_BAD_PARITY 5 +#define DAL_PCI_STATUS_CPU_ACCESS_ERR 4 +#define DAL_PCI_STATUS_READ_CMD 3 +#define DAL_PCI_STATUS_REGISTER_ERR 1 +#define DAL_PCI_STATUS_REGISTER_ACK 0 + +#define DAL_PCI_ACCESS_TIMEOUT 0x64 + +#define DAL_NAME "linux_dal" /* "linux_dal" */ + +#define DAL_DEV_MAJOR 198 + +#define DAL_DEV_INTR_MAJOR_BASE 200 + +#define DAL_DEV_NAME "/dev/" DAL_NAME +#define DAL_ONE_KB 1024 +#define DAL_ONE_MB (1024*1024) +struct dal_chip_parm_s +{ + unsigned int chip_id; /*tmp should be uint8*/ + unsigned int fpga_id; /*tmp add*/ + unsigned int reg_addr; + unsigned int value; +}; +typedef struct dal_chip_parm_s dal_chip_parm_t; + +struct dal_intr_parm_s +{ + unsigned int irq; + unsigned int enable; +}; +typedef struct dal_intr_parm_s dal_intr_parm_t; + +struct dal_irq_mapping_s +{ + unsigned int hw_irq; + unsigned int sw_irq; +}; +typedef struct dal_irq_mapping_s dal_irq_mapping_t; + +struct dal_user_dev_s +{ + unsigned int chip_num; /*output: local chip number*/ + unsigned int chip_id; /*input: local chip id*/ + unsigned int phy_base0; /* low 32bits physical base address */ + unsigned int phy_base1; /* high 32bits physical base address */ + unsigned int bus_no; + unsigned int dev_no; + unsigned int fun_no; + void* virt_base[2]; /* Virtual base address; this must be last member */ +}; +typedef struct dal_user_dev_s dal_user_dev_t; + +struct dma_info_s +{ + unsigned int lchip; + unsigned int phy_base; + unsigned int phy_base_hi; + unsigned int size; + unsigned int* virt_base; +}; +typedef struct dma_info_s dma_info_t; + +struct dal_pci_cfg_ioctl_s +{ + unsigned int chip_id; /* Device ID */ + unsigned int offset; + unsigned int value; +}; +typedef struct dal_pci_cfg_ioctl_s dal_pci_cfg_ioctl_t; + +struct dal_msi_info_s +{ + unsigned int lchip; + unsigned int irq_base; + unsigned int irq_num; +}; +typedef struct dal_msi_info_s dal_msi_info_t; + +struct dal_intr_info_s +{ + unsigned int irq; + unsigned int irq_idx; +}; +typedef struct dal_intr_info_s dal_intr_info_t; + +struct dal_dma_cache_info_s +{ + unsigned long ptr; + unsigned int length; +}; +typedef struct dal_dma_cache_info_s dal_dma_cache_info_t; + +#define CMD_MAGIC 'C' +#define CMD_WRITE_CHIP _IO(CMD_MAGIC, 0) /* for humber ioctrol*/ +#define CMD_READ_CHIP _IO(CMD_MAGIC, 1) /* for humber ioctrol*/ +#define CMD_GET_DEVICES _IO(CMD_MAGIC, 2) +#define CMD_GET_DAL_VERSION _IO(CMD_MAGIC, 3) +#define CMD_PCI_CONFIG_WRITE _IO(CMD_MAGIC, 4) +#define CMD_PCI_CONFIG_READ _IO(CMD_MAGIC, 5) +#define CMD_GET_DMA_INFO _IO(CMD_MAGIC, 6) +#define CMD_REG_INTERRUPTS _IO(CMD_MAGIC, 7) +#define CMD_UNREG_INTERRUPTS _IO(CMD_MAGIC, 8) +#define CMD_EN_INTERRUPTS _IO(CMD_MAGIC, 9) +#define CMD_I2C_READ _IO(CMD_MAGIC, 10) +#define CMD_I2C_WRITE _IO(CMD_MAGIC, 11) +#define CMD_GET_MSI_INFO _IO(CMD_MAGIC, 12) +#define CMD_SET_MSI_CAP _IO(CMD_MAGIC, 13) +#define CMD_IRQ_MAPPING _IO(CMD_MAGIC, 14) +#define CMD_GET_INTR_INFO _IO(CMD_MAGIC, 15) +#define CMD_CACHE_INVAL _IO(CMD_MAGIC, 16) +#define CMD_CACHE_FLUSH _IO(CMD_MAGIC, 17) + +enum dal_version_e +{ + VERSION_MIN, + VERSION_1DOT0, + VERSION_1DOT1, + VERSION_1DOT2, + + VERSION_MAX +}; +typedef enum dal_version_e dal_version_t; + +/* We try to assemble a contiguous segment from chunks of this size */ +#define DMA_BLOCK_SIZE (512 * DAL_ONE_KB) + +#ifdef __cplusplus +} +#endif + +#endif + diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_mpool.c b/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_mpool.c new file mode 100644 index 000000000000..82d3b7a917a8 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_mpool.c @@ -0,0 +1,343 @@ + +#include "dal_mpool.h" + +#ifdef __KERNEL__ +#include +#include + +#define DAL_MALLOC(x) kmalloc(x, GFP_ATOMIC) +#define DAL_FREE(x) kfree(x) + +static spinlock_t dal_mpool_lock; +#define MPOOL_LOCK_INIT() spin_lock_init(&dal_mpool_lock) +#define MPOOL_LOCK() unsigned long flags; spin_lock_irqsave(&dal_mpool_lock, flags) +#define MPOOL_UNLOCK() spin_unlock_irqrestore(&dal_mpool_lock, flags) +#define DAL_PRINT(fmt,arg...) printk(fmt,##arg) +#else /* !__KERNEL__*/ + +#include +#include "sal.h" +#define DAL_MALLOC(x) malloc(x) +#define DAL_FREE(x) free(x) +static sal_mutex_t* dal_mpool_lock; +#define MPOOL_LOCK_INIT() sal_mutex_create(&dal_mpool_lock) +#define MPOOL_LOCK() sal_mutex_lock(dal_mpool_lock) +#define MPOOL_UNLOCK() sal_mutex_unlock(dal_mpool_lock) +#define DAL_PRINT(fmt,arg...) sal_printf(fmt,##arg) + +#endif /* __KERNEL__ */ + +dal_mpool_mem_t* g_free_block_ptr = NULL; + +/* System cache line size */ +#ifndef DAL_CACHE_LINE_BYTES +#define DAL_CACHE_LINE_BYTES 256 +#endif + +static dal_mpool_mem_t* p_desc_pool = NULL; +static dal_mpool_mem_t* p_data_pool = NULL; + +int +dal_mpool_init(void) +{ + MPOOL_LOCK_INIT(); + return 0; +} + +dal_mpool_mem_t* +_dal_mpool_create(void* base, int size, int type) +{ + dal_mpool_mem_t* head = NULL; + dal_mpool_mem_t* tail = NULL; + + head = (dal_mpool_mem_t*)DAL_MALLOC(sizeof(dal_mpool_mem_t)); + if (head == NULL) + { + return NULL; + } + + tail = (dal_mpool_mem_t*)DAL_MALLOC(sizeof(dal_mpool_mem_t)); + if (tail == NULL) + { + DAL_FREE(head); + return NULL; + } + + head->size = tail->size = 0; + head->type = type; + head->address = base; + tail->address = head->address + size; + head->next = tail; + tail->next = NULL; + + return head; +} + +dal_mpool_mem_t* +dal_mpool_create(void* base, int size) +{ + dal_mpool_mem_t* head = NULL; + int mod = (int)(((unsigned long)base) & (DAL_CACHE_LINE_BYTES - 1)); + + MPOOL_LOCK(); + + if (mod) + { + base = (char*)base + (DAL_CACHE_LINE_BYTES - mod); + size -= (DAL_CACHE_LINE_BYTES - mod); + } + + size &= ~(DAL_CACHE_LINE_BYTES - 1); + + /* init for common linkptr, only used for GB */ + head = _dal_mpool_create(base, size, DAL_MPOOL_TYPE_USELESS); + if (NULL == head) + { + MPOOL_UNLOCK(); + return NULL; + } + + /* init for desc linkptr */ + p_desc_pool = _dal_mpool_create(base, DAL_MPOOL_MAX_DESX_SIZE, DAL_MPOOL_TYPE_DESC); + if (NULL == p_desc_pool) + { + MPOOL_UNLOCK(); + DAL_FREE(head->next); + DAL_FREE(head); + return NULL; + } + + /* init for data linkptr */ + p_data_pool = _dal_mpool_create(((char*)base+DAL_MPOOL_MAX_DESX_SIZE), (size - DAL_MPOOL_MAX_DESX_SIZE), DAL_MPOOL_TYPE_DATA); + if (NULL == p_data_pool) + { + MPOOL_UNLOCK(); + DAL_FREE(head->next); + DAL_FREE(head); + DAL_FREE(p_desc_pool->next); + DAL_FREE(p_desc_pool); + return NULL; + } + + MPOOL_UNLOCK(); + + return head; +} + +dal_mpool_mem_t* +_dal_mpool_alloc_comon(dal_mpool_mem_t* ptr, int size, int type) +{ + dal_mpool_mem_t* new_ptr = NULL; + + while (ptr && ptr->next) + { + if (ptr->next->address - (ptr->address + ptr->size) >= size) + { + break; + } + + ptr = ptr->next; + } + + if (!(ptr && ptr->next)) + { + return NULL; + } + + new_ptr = DAL_MALLOC(sizeof(dal_mpool_mem_t)); + if (!new_ptr) + { + return NULL; + } + + new_ptr->type = type; + new_ptr->address = ptr->address + ptr->size; + new_ptr->size = size; + new_ptr->next = ptr->next; + ptr->next = new_ptr; + + return new_ptr; +} + +void* +dal_mpool_alloc(dal_mpool_mem_t* pool, int size, int type) +{ + dal_mpool_mem_t* ptr = NULL; + dal_mpool_mem_t* new_ptr = NULL; + int mod; + + MPOOL_LOCK(); + + mod = size & (DAL_CACHE_LINE_BYTES - 1); + if (mod != 0) + { + size += (DAL_CACHE_LINE_BYTES - mod); + } + + switch(type) + { + case DAL_MPOOL_TYPE_USELESS: + ptr = pool; + new_ptr = _dal_mpool_alloc_comon(ptr, size, type); + if (NULL == new_ptr) + { + MPOOL_UNLOCK(); + return NULL; + } + break; + case DAL_MPOOL_TYPE_DESC: + ptr = p_desc_pool; + new_ptr = _dal_mpool_alloc_comon(ptr, size, type); + if (NULL == new_ptr) + { + MPOOL_UNLOCK(); + return NULL; + } + break; + case DAL_MPOOL_TYPE_DATA: + ptr = p_data_pool; + new_ptr = _dal_mpool_alloc_comon(ptr, size, type); + if (NULL == new_ptr) + { + MPOOL_UNLOCK(); + return NULL; + } + break; + default: + MPOOL_UNLOCK(); + return NULL; + break; + } + + MPOOL_UNLOCK(); + + return new_ptr->address; +} + +void +_dal_mpool_free(dal_mpool_mem_t* ptr, void* addr, int type) +{ + unsigned char* address = (unsigned char*)addr; + dal_mpool_mem_t* prev = NULL; + + while (ptr && ptr->next) + { + if (ptr->next->address == address) + { + break; + } + + ptr = ptr->next; + } + + if (ptr && ptr->next) + { + prev = ptr; + ptr = ptr->next; + prev->next = ptr->next; + DAL_FREE(ptr); + } + + return; +} + +void +dal_mpool_free(dal_mpool_mem_t* pool, void* addr) +{ + dal_mpool_mem_t* ptr = pool; + + MPOOL_LOCK(); + + switch(pool->type) + { + case DAL_MPOOL_TYPE_USELESS: + ptr = pool; + _dal_mpool_free(ptr, addr, DAL_MPOOL_TYPE_USELESS); + break; + case DAL_MPOOL_TYPE_DESC: + ptr = p_desc_pool; + _dal_mpool_free(ptr, addr, DAL_MPOOL_TYPE_DESC); + break; + case DAL_MPOOL_TYPE_DATA: + ptr = p_data_pool; + _dal_mpool_free(ptr, addr, DAL_MPOOL_TYPE_DATA); + break; + default: + break; + } + + MPOOL_UNLOCK(); + return; +} + +int +dal_mpool_destroy(dal_mpool_mem_t* pool) +{ + dal_mpool_mem_t* ptr, * next; + + MPOOL_LOCK(); + + for (ptr = pool; ptr; ptr = next) + { + next = ptr->next; + DAL_FREE(ptr); + } + + for (ptr = p_desc_pool; ptr; ptr = next) + { + next = ptr->next; + DAL_FREE(ptr); + } + + for (ptr = p_data_pool; ptr; ptr = next) + { + next = ptr->next; + DAL_FREE(ptr); + } + + MPOOL_UNLOCK(); + + return 0; +} + +int +dal_mpool_usage(dal_mpool_mem_t* pool, int type) +{ + int usage = 0; + dal_mpool_mem_t* ptr; + + MPOOL_LOCK(); + + for (ptr = pool; ptr; ptr = ptr->next) + { + if (ptr->type == type || ptr->type == -1) + { + usage += ptr->size; + } + } + + MPOOL_UNLOCK(); + + return usage; +} + +int +dal_mpool_debug(dal_mpool_mem_t* pool) +{ + dal_mpool_mem_t* ptr; + int index = 0; + + MPOOL_LOCK(); + + for (ptr = pool; ptr; ptr = ptr->next) + { +// DAL_PRINT("%2dst mpool block: address=0x%8x, size=0x%x \n", index, (unsigned int)ptr->address, ptr->size); + DAL_PRINT("%2dst mpool block: address=%p, size=0x%x \n", index, ptr->address, ptr->size); // note + index++; + } + + MPOOL_UNLOCK(); + + return 0; +} + diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_mpool.h b/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_mpool.h new file mode 100644 index 000000000000..a1fa37d05f82 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/modules/dal_mpool.h @@ -0,0 +1,71 @@ +/** + @file dal_mpool.h + + @author Copyright (C) 2011 Centec Networks Inc. All rights reserved. + + @date 2012-5-10 + + @version v2.0 + + This file contains the dma memory init, allocation and free APIs +*/ + +#ifndef _DMA_MPOOL_H +#define _DMA_MPOOL_H +#ifdef __cplusplus +extern "C" { +#endif + +#define DAL_MPOOL_MAX_DESX_SIZE (1024*1024) + +enum dal_mpool_type_e +{ + DAL_MPOOL_TYPE_USELESS, /* just compatible with GB */ + DAL_MPOOL_TYPE_DESC, /* dma mpool op for desc */ + DAL_MPOOL_TYPE_DATA /* dma mpool op for data */ +}; +typedef enum dal_mpool_type_e dal_mpool_type_t; + +struct dal_mpool_mem_s +{ + unsigned char* address; + int size; + int type; + struct dal_mpool_mem_s* next; +}; +typedef struct dal_mpool_mem_s dal_mpool_mem_t; + +/** + @brief This function is to alloc dma memory + + @param[in] size size of memory + + @return NULL + +*/ +extern int +dal_mpool_init(void); + +extern dal_mpool_mem_t* +dal_mpool_create(void* base_ptr, int size); + +extern void* +dal_mpool_alloc(dal_mpool_mem_t* pool, int size, int type); + +extern void +dal_mpool_free(dal_mpool_mem_t* pool, void* addr); + +extern int +dal_mpool_destroy(dal_mpool_mem_t* pool); + +extern int +dal_mpool_usage(dal_mpool_mem_t* pool, int type); + +extern int +dal_mpool_debug(dal_mpool_mem_t* pool); +#ifdef __cplusplus +} +#endif + +#endif /* !_DMA_MPOOL_H */ + diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/scripts/48x6q_platform.sh b/platform/centec/sonic-platform-modules-e582/48x6q/scripts/48x6q_platform.sh new file mode 100755 index 000000000000..e8f81a20d9d1 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/scripts/48x6q_platform.sh @@ -0,0 +1,62 @@ +#!/bin/bash + +#platform init script for centec e582-48x6q + +init_devnum() { + found=0 + for devnum in 0 1; do + devname=`cat /sys/bus/i2c/devices/i2c-${devnum}/name` + # I801 adapter can be at either dffd0000 or dfff0000 + if [[ $devname == 'SMBus I801 adapter at '* ]]; then + found=1 + break + fi + done + + [ $found -eq 0 ] && echo "cannot find I801" && exit 1 +} + +init_devnum + +if [ "$1" == "init" ]; then + #install drivers and dependencies + depmod -a + modprobe i2c-i801 + modprobe i2c-dev + modprobe i2c-mux + modprobe i2c-smbus + modprobe i2c-mux-pca954x force_deselect_on_exit=1 + i2cset -y 0 0x58 0x8 0x3f + i2cset -y 0 0x20 0x1b 0x0 + i2cset -y 0 0x20 0xb 0x0 + i2cset -y 0 0x21 0x19 0x0 + i2cset -y 0 0x21 0x9 0x0 + i2cset -y 0 0x21 0x1c 0x0 + i2cset -y 0 0x21 0xc 0x0 + i2cset -y 0 0x22 0x1a 0x0 + i2cset -y 0 0x22 0xa 0x0 + i2cset -y 0 0x23 0x18 0x0 + i2cset -y 0 0x23 0x8 0x0 + i2cset -y 0 0x23 0x1b 0x0 + i2cset -y 0 0x23 0xb 0x0 + modprobe lm77 + modprobe tun + modprobe dal + modprobe centec_at24c64 + modprobe centec_e582_48x6q_platform + + #start platform monitor + rm -rf /usr/bin/platform_monitor + ln -s /usr/bin/48x6q_platform_monitor.py /usr/bin/platform_monitor + python /usr/bin/platform_monitor & +elif [ "$1" == "deinit" ]; then + kill -9 $(pidof platform_monitor) > /dev/null 2>&1 + rm -rf /usr/bin/platform_monitor + modprobe -r centec_e582_48x6q_platform + modprobe -r centec_at24c64 + modprobe -r dal + modprobe -r i2c-mux-pca954x + modprobe -r i2c-dev +else + echo "e582-48x6q_platform : Invalid option !" +fi diff --git a/platform/centec/sonic-platform-modules-e582/48x6q/scripts/48x6q_platform_monitor.py b/platform/centec/sonic-platform-modules-e582/48x6q/scripts/48x6q_platform_monitor.py new file mode 100644 index 000000000000..d08802a35f3b --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/48x6q/scripts/48x6q_platform_monitor.py @@ -0,0 +1,217 @@ +#!/usr/bin/env python + +############################################################################# +# Centec +# +# Module contains an implementation of sfp presence scan logic +# +############################################################################# + +try: + import os + import os.path + import threading + import time + import logging + import struct + import syslog + import swsssdk + from socket import * + from select import * +except ImportError, e: + raise ImportError(str(e) + " - required module not found") + + +def DBG_PRINT(str): + syslog.openlog("centec-pmon") + syslog.syslog(syslog.LOG_INFO, str) + syslog.closelog() + +PORT_NUMBER = (48+6) + +class PlatformMonitor: + + """init board platform default config""" + def __init__(self): + """[ctlid, slavedevid]""" + self.fiber_mapping = [(0, 0)] # res + self.fiber_mapping.extend([(0, 0), (0, 1), (0, 2), (0, 3), (0, 4), (0, 5), (0, 6), (0, 7)]) # panel port 1~8 + self.fiber_mapping.extend([(0, 14), (0, 13), (0, 15), (0, 12), (0, 8), (0, 11), (0, 9), (0, 10)]) # panel port 9~16 + self.fiber_mapping.extend([(0, 22), (0, 21), (0, 23), (0, 20), (0, 16), (0, 19), (0, 17), (0, 18)]) # panel port 17~24 + self.fiber_mapping.extend([(1, 4), (1, 3), (1, 5), (1, 2), (1, 6), (1, 1), (1, 7), (1, 0)]) # panel port 25~32 + self.fiber_mapping.extend([(1, 8), (1, 15), (1, 9), (1, 14), (1, 10), (1, 13), (1, 11), (1, 12)]) # panel port 33~40 + self.fiber_mapping.extend([(1, 22), (1, 21), (1, 23), (1, 20), (1, 16), (1, 19), (1, 17), (1, 18)]) # panel port 41~48 + self.fiber_mapping.extend([(1, 28), (1, 29), (1, 26), (1, 27), (1, 24), (1, 25)]) # panel port 49~54 + + self.udpClient = socket(AF_INET, SOCK_DGRAM) + self.sfp_present = [0]*(PORT_NUMBER+1) + self.sfp_enable = [0]*(PORT_NUMBER+1) + self.f_sfp_present = "/sys/class/sfp/sfp{}/sfp_presence" + self.f_sfp_enable = "/sys/class/sfp/sfp{}/sfp_enable" + self.sfp_scan_timer = 0 + + def is_qsfp(self, port): + if port <= 48: + return False + else: + return True + + def get_sfp_present(self, port): + with open(self.f_sfp_present.format(port), 'r') as sfp_file: + return int(sfp_file.read()) + + def set_sfp_present(self, port, present): + self.sfp_present[port] = present + + def set_sfp_enable(self, port, enable): + if self.is_qsfp(port): + if enable: + with open(self.f_sfp_enable.format(port), 'w') as sfp_file: + sfp_file.write("1") + self.sfp_enable[port] = 1 + else: + with open(self.f_sfp_enable.format(port), 'w') as sfp_file: + sfp_file.write("0") + self.sfp_enable[port] = 0 + else: + (ctlid, devid) = self.fiber_mapping[port] + req = struct.pack('=HHHBBHIBBBBI', 0, 9, 16, ctlid, devid, 0x50, 0, 0x56, 1, 0xf, 0, 1) + self.udpClient.sendto(req, ('localhost', 8101)) + rsp, addr = self.udpClient.recvfrom(1024) + rsp_data = struct.unpack('=HHHBBHIBBBBIi512B', rsp) + enable_v = rsp_data[13] + if enable: + enable_v &= 0xf0 + else: + enable_v |= 0x0f + data = struct.pack('=HHHBBHBBBB', 0, 11, 8, ctlid, 0x56, 0x50, devid, enable_v, 0xf, 0) + self.udpClient.sendto(data, ('localhost', 8101)) + DBG_PRINT("set sfp{} to {}".format(port, ("enable" if enable else "disable"))) + + def initialize_configdb(self): + try: + f_mac = os.popen('ip link show eth0 | grep ether | awk \'{print $2}\'') + mac_addr = f_mac.read(17) + last_byte = mac_addr[-2:] + aligned_last_byte = format(int(int(str(last_byte), 16) + 1), '02x') + mac_addr = mac_addr[:-2] + aligned_last_byte + DBG_PRINT("start connect swss config-db to set device mac-address") + swss = swsssdk.SonicV2Connector() + swss.connect(swss.CONFIG_DB) + swss.set(swss.CONFIG_DB, "DEVICE_METADATA|localhost", 'mac', mac_addr) + mac_addr = swss.get(swss.CONFIG_DB, "DEVICE_METADATA|localhost", 'mac') + DBG_PRINT("set device mac-address: %s" % mac_addr) + except IOError as e: + DBG_PRINT(str(e)) + + def initialize_rpc(self): + while True: + try: + r_sel = [self.udpClient] + echo_req = struct.pack('=HHH', 0, 1, 0) + self.udpClient.sendto(echo_req, ('localhost', 8101)) + result = select(r_sel, [], [], 1) + if self.udpClient in result[0]: + echo_rsp, srv_addr = self.udpClient.recvfrom(1024) + if echo_rsp: + break + DBG_PRINT("connect to sdk rpc server timeout, try again.") + except IOError as e: + DBG_PRINT(str(e)) + + DBG_PRINT("connect to sdk rpc server success.") + + def initialize_gpio(self): + # set gpio 1,2,3,4,5,6,7,8 output mode + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 1, 1, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 1, 2, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 1, 3, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 1, 4, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 1, 5, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 1, 6, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 1, 7, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 1, 8, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + # set gpio 1,2,3,4,5,6,7,8 output 0 to reset i2c bridge + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 1, 0) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 2, 0) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 3, 0) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 4, 0) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 5, 0) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 6, 0) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 7, 0) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 8, 0) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + # set gpio 1,2,3,4,5,6,7,8 output 1 to release i2c bridge + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 1, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 2, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 3, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 4, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 5, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 6, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 7, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + gpio_init = struct.pack('=HHHBBB', 0, 13, 3, 2, 8, 1) + self.udpClient.sendto(gpio_init, ('localhost', 8101)) + DBG_PRINT("config ctc chip gpio done.") + + def initialize_sfp(self): + try: + for port in range(1, PORT_NUMBER+1): + if self.get_sfp_present(port): + self.set_sfp_present(port, 1) + self.set_sfp_enable(port, 1) + else: + self.set_sfp_present(port, 0) + self.set_sfp_enable(port, 0) + except IOError as e: + DBG_PRINT(str(e)) + + def initialize(self): + DBG_PRINT("start connect to sdk rpc server.") + + self.initialize_configdb() + self.initialize_rpc() + self.initialize_gpio() + self.initialize_sfp() + + def sfp_scan(self): + try: + for port in range(1, PORT_NUMBER+1): + cur_present = self.get_sfp_present(port) + if self.sfp_present[port] != cur_present: + self.set_sfp_present(port, cur_present) + self.set_sfp_enable(port, cur_present) + except IOError as e: + DBG_PRINT(str(e)) + + def start(self): + while True: + self.sfp_scan() + time.sleep(1) + +if __name__ == "__main__": + monitor = PlatformMonitor() + monitor.initialize() + monitor.start() + diff --git a/platform/centec/sonic-platform-modules-e582/LICENSE b/platform/centec/sonic-platform-modules-e582/LICENSE new file mode 100644 index 000000000000..99228517bae7 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/LICENSE @@ -0,0 +1,15 @@ +Copyright (C) 2017 Centec, Inc + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/centec/sonic-platform-modules-e582/README.md b/platform/centec/sonic-platform-modules-e582/README.md new file mode 100644 index 000000000000..61b3ef6c87f4 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/README.md @@ -0,0 +1 @@ +platform drivers for Centec E582 for the SONiC project diff --git a/platform/centec/sonic-platform-modules-e582/debian/changelog b/platform/centec/sonic-platform-modules-e582/debian/changelog new file mode 100644 index 000000000000..d6f8d9ed26d4 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/debian/changelog @@ -0,0 +1,11 @@ +sonic-centec-platform-modules (1.1) unstable; urgency=low + + * Add support for centec e582-48x2q4z + + -- xuwj Thus, 25 Jan 2018 13:43:40 +0800 + +sonic-centec-platform-modules (1.0) unstable; urgency=low + + * Initial release + + -- xuwj Mon, 22 Jan 2018 13:43:40 +0800 diff --git a/platform/centec/sonic-platform-modules-e582/debian/compat b/platform/centec/sonic-platform-modules-e582/debian/compat new file mode 100644 index 000000000000..ec635144f600 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/debian/compat @@ -0,0 +1 @@ +9 diff --git a/platform/centec/sonic-platform-modules-e582/debian/control b/platform/centec/sonic-platform-modules-e582/debian/control new file mode 100644 index 000000000000..103b6eca242d --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/debian/control @@ -0,0 +1,17 @@ +Source: sonic-centec-platform-modules +Section: main +Priority: extra +Maintainer: yangbs +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: platform-modules-e582-48x2q4z +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: platform-modules-e582-48x6q +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + diff --git a/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x2q4z.init b/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x2q4z.init new file mode 100755 index 000000000000..3ef5e7e30b6d --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x2q4z.init @@ -0,0 +1,38 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup e582-48x2q4z board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + /usr/bin/48x2q4z_platform.sh init + + echo "done." + ;; + +stop) + /usr/bin/48x2q4z_platform.sh deinit + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: service platform-modules-e582-48x2q4z {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x2q4z.install b/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x2q4z.install new file mode 100644 index 000000000000..86569b323b1a --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x2q4z.install @@ -0,0 +1,2 @@ +48x2q4z/cfg/48x2q4z-modules.conf etc/modules-load.d +48x2q4z/scripts/48x2q4z_platform.sh usr/bin diff --git a/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x6q.init b/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x6q.init new file mode 100755 index 000000000000..1c5b0c1c4978 --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x6q.init @@ -0,0 +1,38 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup e582-48x6q board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + /usr/bin/48x6q_platform.sh init + + echo "done." + ;; + +stop) + /usr/bin/48x6q_platform.sh deinit + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: service platform-modules-e582-48x6q {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x6q.install b/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x6q.install new file mode 100644 index 000000000000..7ec21f33784d --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/debian/platform-modules-e582-48x6q.install @@ -0,0 +1,6 @@ +48x6q/cfg/48x6q-modules.conf etc/modules-load.d +48x6q/cfg/minigraph.xml etc/sonic +48x6q/cfg/config_db.json etc/sonic +48x6q/cfg/config_db_l2l3.json etc/sonic +48x6q/scripts/48x6q_platform.sh usr/bin +48x6q/scripts/48x6q_platform_monitor.py usr/bin diff --git a/platform/centec/sonic-platform-modules-e582/debian/rules b/platform/centec/sonic-platform-modules-e582/debian/rules new file mode 100755 index 000000000000..9f5d67b1af5c --- /dev/null +++ b/platform/centec/sonic-platform-modules-e582/debian/rules @@ -0,0 +1,35 @@ +#!/usr/bin/make -f + +export INSTALL_MOD_DIR:=extra + +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MOD_SRC_DIR:= $(shell pwd) +MODULE_DIRS:= 48x6q 48x2q4z + +%: + dh $@ + +override_dh_auto_build: + (for mod in $(MODULE_DIRS); do \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ + done) + +override_dh_auto_install: + (for mod in $(MODULE_DIRS); do \ + dh_installdirs -pplatform-modules-e582-$${mod} \ + $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp -f $(MOD_SRC_DIR)/$${mod}/modules/*.ko \ + debian/platform-modules-e582-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + done) + +override_dh_usrlocal: + +override_dh_clean: + dh_clean + (for mod in $(MODULE_DIRS); do \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules clean; \ + rm -rf $(MOD_SRC_DIR)/$${mod}/modules/*.ko; \ + rm -rf debian/platform-modules-e582-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR)/*.ko; \ + done) + From add2444cfdedccd01ff809da1233c5579e8a4a44 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 13 Aug 2018 04:29:26 +0000 Subject: [PATCH 134/180] [barefoot]: build platform modules for bfn, bfn-montara, wnc-osw1800 Signed-off-by: Guohan Lu --- platform/barefoot/platform-modules-bfn-montara.mk | 2 +- platform/barefoot/platform-modules-bfn.mk | 2 ++ platform/barefoot/platform-modules-wnc-osw1800.mk | 2 +- 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/platform/barefoot/platform-modules-bfn-montara.mk b/platform/barefoot/platform-modules-bfn-montara.mk index 853c3c636ac3..c1b401ad3fb7 100644 --- a/platform/barefoot/platform-modules-bfn-montara.mk +++ b/platform/barefoot/platform-modules-bfn-montara.mk @@ -10,4 +10,4 @@ $(BFN_MONTARA_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMO $(BFN_MONTARA_PLATFORM_MODULE)_PLATFORM = x86_64-accton_wedge100bf_32x-r0 SONIC_DPKG_DEBS += $(BFN_MONTARA_PLATFORM_MODULE) -# SONIC_STRETCH_DEBS += $(BFN_MONTARA_PLATFORM_MODULE) +SONIC_STRETCH_DEBS += $(BFN_MONTARA_PLATFORM_MODULE) diff --git a/platform/barefoot/platform-modules-bfn.mk b/platform/barefoot/platform-modules-bfn.mk index 3f76e94aa0b2..5c3df75c1b88 100644 --- a/platform/barefoot/platform-modules-bfn.mk +++ b/platform/barefoot/platform-modules-bfn.mk @@ -9,3 +9,5 @@ $(BFN_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-bfn $(BFN_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) $(BFN_PLATFORM_MODULE)_PLATFORM = x86_64-accton_wedge100bf_65x-r0 SONIC_DPKG_DEBS += $(BFN_PLATFORM_MODULE) + +SONIC_STRETCH_DEBS += $(BFN_PLATFORM_MODULE) diff --git a/platform/barefoot/platform-modules-wnc-osw1800.mk b/platform/barefoot/platform-modules-wnc-osw1800.mk index aabcb8cdf0ba..5703d069c97e 100644 --- a/platform/barefoot/platform-modules-wnc-osw1800.mk +++ b/platform/barefoot/platform-modules-wnc-osw1800.mk @@ -10,4 +10,4 @@ $(WNC_OSW1800_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMO $(WNC_OSW1800_PLATFORM_MODULE)_PLATFORM = x86_64-wnc_osw1800-r0 SONIC_DPKG_DEBS += $(WNC_OSW1800_PLATFORM_MODULE) -# SONIC_STRETCH_DEBS += $(WNC_OSW1800_PLATFORM_MODULE) +SONIC_STRETCH_DEBS += $(WNC_OSW1800_PLATFORM_MODULE) From 647af39ff09da5186a848378f89b96cc7382c7f3 Mon Sep 17 00:00:00 2001 From: lguohan Date: Sun, 12 Aug 2018 22:23:43 -0700 Subject: [PATCH 135/180] [build]: create empty /var/lib/docker if needed (#1920) stretch docker-engine in base image is not started by default in the build process. Need to create empty /var/lib/docker Signed-off-by: Guohan Lu --- build_debian.sh | 1 + 1 file changed, 1 insertion(+) diff --git a/build_debian.sh b/build_debian.sh index 03425ffe5bcf..d531a7207367 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -396,6 +396,7 @@ sudo rm -f $ONIE_INSTALLER_PAYLOAD $FILESYSTEM_SQUASHFS ## Output the file system total size for diag purpose ## Note: -x to skip directories on different file systems, such as /proc sudo du -hsx $FILESYSTEM_ROOT +sudo mkdir -p $FILESYSTEM_ROOT/var/lib/docker sudo mksquashfs $FILESYSTEM_ROOT $FILESYSTEM_SQUASHFS -e boot -e var/lib/docker -e $PLATFORM_DIR ## Compress docker files From f3ca7c422fc432e36a9c8653195b29fa04061cc6 Mon Sep 17 00:00:00 2001 From: lguohan Date: Sun, 12 Aug 2018 22:23:58 -0700 Subject: [PATCH 136/180] [rsyslog]: use # to separate container name and program name in syslog message (#1918) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previously use / to separate container name and program name. However, in rsyslogd: Precisely, the programname is terminated by either (whichever occurs first): end of tag nonprintable character ‘:’ ‘[‘ ‘/’ The above definition has been taken from the FreeBSD syslogd sources. Signed-off-by: Guohan Lu --- dockers/docker-database/Dockerfile.j2 | 2 +- dockers/docker-dhcp-relay/Dockerfile.j2 | 2 +- dockers/docker-fpm-frr/Dockerfile.j2 | 2 +- dockers/docker-fpm-quagga/Dockerfile.j2 | 2 +- dockers/docker-lldp-sv2/Dockerfile.j2 | 2 +- dockers/docker-orchagent/Dockerfile.j2 | 2 +- dockers/docker-platform-monitor/Dockerfile.j2 | 2 +- dockers/docker-router-advertiser/Dockerfile.j2 | 2 +- dockers/docker-snmp-sv2/Dockerfile.j2 | 2 +- dockers/docker-sonic-telemetry/Dockerfile.j2 | 2 +- dockers/docker-teamd/Dockerfile.j2 | 2 +- files/image_config/rsyslog/rsyslog.d/00-sonic.conf | 10 +++++----- 12 files changed, 16 insertions(+), 16 deletions(-) diff --git a/dockers/docker-database/Dockerfile.j2 b/dockers/docker-database/Dockerfile.j2 index 712ada91a904..cc246c1bf949 100644 --- a/dockers/docker-database/Dockerfile.j2 +++ b/dockers/docker-database/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#syslogtag%/;" /etc/rsyslog.conf # Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/dockers/docker-dhcp-relay/Dockerfile.j2 b/dockers/docker-dhcp-relay/Dockerfile.j2 index 7382664c64f3..0a760d301f3a 100644 --- a/dockers/docker-dhcp-relay/Dockerfile.j2 +++ b/dockers/docker-dhcp-relay/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf # Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/dockers/docker-fpm-frr/Dockerfile.j2 b/dockers/docker-fpm-frr/Dockerfile.j2 index 4796552d20c7..194b91f33499 100644 --- a/dockers/docker-fpm-frr/Dockerfile.j2 +++ b/dockers/docker-fpm-frr/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf # Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/dockers/docker-fpm-quagga/Dockerfile.j2 b/dockers/docker-fpm-quagga/Dockerfile.j2 index 39037f3d042d..3981935a84be 100644 --- a/dockers/docker-fpm-quagga/Dockerfile.j2 +++ b/dockers/docker-fpm-quagga/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf # Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/dockers/docker-lldp-sv2/Dockerfile.j2 b/dockers/docker-lldp-sv2/Dockerfile.j2 index fb91af231592..f08a70c01302 100644 --- a/dockers/docker-lldp-sv2/Dockerfile.j2 +++ b/dockers/docker-lldp-sv2/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf # Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/dockers/docker-orchagent/Dockerfile.j2 b/dockers/docker-orchagent/Dockerfile.j2 index 2d204df9078f..dc70bbcbdedc 100755 --- a/dockers/docker-orchagent/Dockerfile.j2 +++ b/dockers/docker-orchagent/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf ## Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/dockers/docker-platform-monitor/Dockerfile.j2 b/dockers/docker-platform-monitor/Dockerfile.j2 index d7cb6a46f5f3..e33ea72f07b1 100755 --- a/dockers/docker-platform-monitor/Dockerfile.j2 +++ b/dockers/docker-platform-monitor/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf # Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/dockers/docker-router-advertiser/Dockerfile.j2 b/dockers/docker-router-advertiser/Dockerfile.j2 index c6c770bb7677..1385e1ebec63 100644 --- a/dockers/docker-router-advertiser/Dockerfile.j2 +++ b/dockers/docker-router-advertiser/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf # Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/dockers/docker-snmp-sv2/Dockerfile.j2 b/dockers/docker-snmp-sv2/Dockerfile.j2 index e463d00441c7..02d0679f8f9c 100644 --- a/dockers/docker-snmp-sv2/Dockerfile.j2 +++ b/dockers/docker-snmp-sv2/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf # Enable -O for all Python calls ENV PYTHONOPTIMIZE 1 diff --git a/dockers/docker-sonic-telemetry/Dockerfile.j2 b/dockers/docker-sonic-telemetry/Dockerfile.j2 index 51d272c2a212..6b77f999e5ee 100644 --- a/dockers/docker-sonic-telemetry/Dockerfile.j2 +++ b/dockers/docker-sonic-telemetry/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf ## Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/dockers/docker-teamd/Dockerfile.j2 b/dockers/docker-teamd/Dockerfile.j2 index f405fdde10e2..1c3d9eea462a 100644 --- a/dockers/docker-teamd/Dockerfile.j2 +++ b/dockers/docker-teamd/Dockerfile.j2 @@ -1,7 +1,7 @@ FROM docker-config-engine ARG docker_container_name -RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name\/%syslogtag%/;" /etc/rsyslog.conf +RUN [ -f /etc/rsyslog.conf ] && sed -ri "s/%syslogtag%/$docker_container_name#%syslogtag%/;" /etc/rsyslog.conf ## Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive diff --git a/files/image_config/rsyslog/rsyslog.d/00-sonic.conf b/files/image_config/rsyslog/rsyslog.d/00-sonic.conf index 6e4be4bb6022..455fe89fd2bf 100644 --- a/files/image_config/rsyslog/rsyslog.d/00-sonic.conf +++ b/files/image_config/rsyslog/rsyslog.d/00-sonic.conf @@ -1,14 +1,14 @@ ## Quagga rules -if $programname == ["quagga", - "watchquagga", - "zebra"] +if $programname == ["bgp#quagga", + "bgp#watchquagga", + "bgp#zebra"] then { /var/log/quagga/zebra.log stop } -if $programname == "bgpd" then { +if $programname == "bgp#bgpd" then { /var/log/quagga/bgpd.log stop } @@ -24,4 +24,4 @@ if $programname contains "teamd_" then { if $msg startswith " telemetry" or ($msg startswith " dialout" )then { /var/log/telemetry.log stop -} \ No newline at end of file +} From 0cd4ef0c8508f734b7ad8460b37684fb8fc6ddcd Mon Sep 17 00:00:00 2001 From: lguohan Date: Mon, 13 Aug 2018 01:12:58 -0700 Subject: [PATCH 137/180] [socat]: build socat with readline (#1919) support readline in bcmsh Signed-off-by: Guohan Lu --- dockers/docker-base/Dockerfile.j2 | 3 -- .../docker-syncd-brcm/base_image_files/bcmsh | 2 +- platform/broadcom/docker-syncd-brcm/bcmsh | 2 +- rules/docker-base.mk | 1 + rules/socat.mk | 9 ++++++ src/socat/Makefile | 28 +++++++++++++++++++ src/socat/enable_readline.patch | 13 +++++++++ 7 files changed, 53 insertions(+), 5 deletions(-) create mode 100644 rules/socat.mk create mode 100644 src/socat/Makefile create mode 100644 src/socat/enable_readline.patch diff --git a/dockers/docker-base/Dockerfile.j2 b/dockers/docker-base/Dockerfile.j2 index bd5c91faa9db..2aef59241b13 100644 --- a/dockers/docker-base/Dockerfile.j2 +++ b/dockers/docker-base/Dockerfile.j2 @@ -34,9 +34,6 @@ RUN apt-get -y install \ # eliminating memory leaks RUN apt-get -y -t jessie-backports install rsyslog -# Pre-install troubleshooting packages -RUN apt-get -y install socat - COPY ["etc/rsyslog.conf", "/etc/rsyslog.conf"] COPY ["etc/rsyslog.d/*", "/etc/rsyslog.d/"] COPY ["root/.vimrc", "/root/.vimrc"] diff --git a/platform/broadcom/docker-syncd-brcm/base_image_files/bcmsh b/platform/broadcom/docker-syncd-brcm/base_image_files/bcmsh index c3a38742575d..3bb78b0da796 100755 --- a/platform/broadcom/docker-syncd-brcm/base_image_files/bcmsh +++ b/platform/broadcom/docker-syncd-brcm/base_image_files/bcmsh @@ -1,3 +1,3 @@ #!/bin/bash -docker exec -i syncd bcmsh "$@" +docker exec -it syncd bcmsh "$@" diff --git a/platform/broadcom/docker-syncd-brcm/bcmsh b/platform/broadcom/docker-syncd-brcm/bcmsh index 7d2fa2f4d3c3..9dfa7874a038 100755 --- a/platform/broadcom/docker-syncd-brcm/bcmsh +++ b/platform/broadcom/docker-syncd-brcm/bcmsh @@ -31,5 +31,5 @@ if [ "$quiet" = false ]; then echo "$banner" fi -/usr/bin/socat - UNIX-CONNECT:/var/run/sswsyncd/sswsyncd.socket +/usr/bin/socat readline UNIX-CONNECT:/var/run/sswsyncd/sswsyncd.socket diff --git a/rules/docker-base.mk b/rules/docker-base.mk index 5ef06c7fc873..55e44e7f3447 100644 --- a/rules/docker-base.mk +++ b/rules/docker-base.mk @@ -5,6 +5,7 @@ $(DOCKER_BASE)_PATH = $(DOCKERS_PATH)/docker-base $(DOCKER_BASE)_DEPENDS += $(SUPERVISOR) $(DOCKER_BASE)_DEPENDS += $(LIBWRAP) $(DOCKER_BASE)_DEPENDS += $(BASH) +$(DOCKER_BASE)_DEPENDS += $(SOCAT) ifeq ($(SONIC_INSTALL_DEBUG_TOOLS),y) GDB = gdb diff --git a/rules/socat.mk b/rules/socat.mk new file mode 100644 index 000000000000..b93795223624 --- /dev/null +++ b/rules/socat.mk @@ -0,0 +1,9 @@ +# socat packages + +SOCAT_VERSION = 1.7.3.1-2+deb9u1 + +export SOCAT_VERSION + +SOCAT = socat_$(SOCAT_VERSION)_amd64.deb +$(SOCAT)_SRC_PATH = $(SRC_PATH)/socat +SONIC_MAKE_DEBS += $(SOCAT) diff --git a/src/socat/Makefile b/src/socat/Makefile new file mode 100644 index 000000000000..e82208946ac1 --- /dev/null +++ b/src/socat/Makefile @@ -0,0 +1,28 @@ +.ONESHELL: +SHELL = /bin/bash +.SHELLFLAGS += -e + +MAIN_TARGET = socat_$(SOCAT_VERSION)_amd64.deb + +$(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : + # Remove any stale files + rm -rf ./socat-1.7.3.1 + + # Get source package + wget -NO socat_$(SOCAT_VERSION).dsc "https://sonicstorage.blob.core.windows.net/packages/debian/socat_1.7.3.1-2+deb9u1.dsc?sv=2015-04-05&sr=b&sig=Ph7aMqb%2F%2FE%2F8qwxMXoXb5oK1YPkfVt6PV8mBBv5Wi%2F4%3D&se=2155-07-05T11%3A42%3A29Z&sp=r" + wget -NO socat_$(SOCAT_VERSION).debian.tar.xz "https://sonicstorage.blob.core.windows.net/packages/debian/socat_1.7.3.1-2+deb9u1.debian.tar.xz?sv=2015-04-05&sr=b&sig=yv77Fr5RtZgRTPmJK3j0lZ0BzsCiGaSs2i7NqQKEy2Y%3D&se=2155-07-05T11%3A39%3A59Z&sp=r" + wget -NO socat_1.7.3.1.orig.tar.gz "https://sonicstorage.blob.core.windows.net/packages/debian/socat_1.7.3.1.orig.tar.gz?sv=2015-04-05&sr=b&sig=0Ai1FM604aGsF5uBu2yN8w9O1a6zNjIDCdaiTo24DyQ%3D&se=2155-07-05T11%3A40%3A14Z&sp=r" + + dpkg-source -x socat_$(SOCAT_VERSION).dsc + + # Build source and Debian packages + pushd socat-1.7.3.1 + patch -p0 < ../enable_readline.patch + dpkg-buildpackage -rfakeroot -b -us -uc -j$(SONIC_CONFIG_MAKE_JOBS) + popd + + # Move the newly-built .deb packages to the destination directory + mv $(DERIVED_TARGETS) $* $(DEST)/ + +$(addprefix $(DEST)/, $(DERIVED_TARGETS)): $(DEST)/% : $(DEST)/$(MAIN_TARGET) + diff --git a/src/socat/enable_readline.patch b/src/socat/enable_readline.patch new file mode 100644 index 000000000000..f1914d3cb494 --- /dev/null +++ b/src/socat/enable_readline.patch @@ -0,0 +1,13 @@ +--- debian/rules.old 2018-08-12 11:48:42.220230100 +0000 ++++ debian/rules 2018-08-12 11:48:52.072230100 +0000 +@@ -12,9 +12,6 @@ + %: + dh $@ --with=autoreconf + +-override_dh_auto_configure: +- dh_auto_configure -- --disable-readline +- + override_dh_auto_test: + +-.PHONY: override_dh_auto_configure override_dh_auto_test ++.PHONY: override_dh_auto_test From 9047edc38e1fe74d12f37d035387f7f55c30433c Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Mon, 13 Aug 2018 10:31:11 +0000 Subject: [PATCH 138/180] [platform]: move dell platform modules into buildimage repo Signed-off-by: Guohan Lu --- .gitmodules | 8 - platform/broadcom/sonic-platform-modules-dell | 1 - .../sonic-platform-modules-dell/.gitignore | 50 + .../sonic-platform-modules-dell/LICENSE | 16 + .../sonic-platform-modules-dell/README.md | 1 + .../common/dell_i2c_utils.sh | 62 + .../common/dell_pmc.c | 1919 +++++++++++++++++ .../common/fstrim.service | 6 + .../common/fstrim.timer | 12 + .../debian/changelog | 11 + .../sonic-platform-modules-dell/debian/compat | 1 + .../debian/control | 22 + .../debian/platform-modules-s6100.init | 40 + .../debian/platform-modules-s6100.install | 9 + .../debian/platform-modules-s6100.postinst | 7 + .../debian/platform-modules-z9100.init | 40 + .../debian/platform-modules-z9100.install | 8 + .../debian/platform-modules-z9100.postinst | 7 + .../debian/platform-modules-z9264f.init | 40 + .../debian/platform-modules-z9264f.install | 6 + .../sonic-platform-modules-dell/debian/rules | 45 + .../s6100/modules/Makefile | 2 + .../s6100/modules/dell_s6100_iom_cpld.c | 266 +++ .../s6100/scripts/README | 146 ++ .../s6100/scripts/io_rd_wr.py | 93 + .../s6100/scripts/iom_power_off.sh | 16 + .../s6100/scripts/iom_power_on.sh | 17 + .../s6100/scripts/platform_sensors.py | 322 +++ .../s6100/scripts/s6100_platform.sh | 206 ++ .../s6100/scripts/sensors | 7 + .../z9100/cfg/z9100-modules.conf | 15 + .../z9100/modules/Makefile | 2 + .../z9100/modules/dell_z9100_cpld.c | 273 +++ .../z9100/scripts/check_qsfp.sh | 60 + .../z9100/scripts/platform_sensors.py | 324 +++ .../z9100/scripts/sensors | 7 + .../z9100/scripts/z9100_platform.sh | 170 ++ .../z9264f/cfg/z9264f-modules.conf | 19 + .../z9264f/modules/Makefile | 2 + .../z9264f/modules/dell_z9264f_fpga_ocores.c | 1418 ++++++++++++ .../z9264f/scripts/check_qsfp.sh | 3 + .../z9264f/scripts/pcisysfs.py | 102 + .../z9264f/scripts/platform_sensors.py | 251 +++ .../z9264f/scripts/sensors | 8 + .../z9264f/scripts/z9264f_platform.sh | 125 ++ .../broadcom/sonic-platform-modules-s6000 | 1 - .../sonic-platform-modules-s6000/.gitignore | 50 + .../sonic-platform-modules-s6000/LICENSE | 15 + .../sonic-platform-modules-s6000/MAINTAINERS | 7 + .../sonic-platform-modules-s6000/README.md | 2 + .../debian/changelog | 5 + .../debian/compat | 1 + .../debian/control | 12 + .../debian/copyright | 16 + .../debian/platform-modules-s6000.init | 99 + .../debian/platform-modules-s6000.install | 1 + .../sonic-platform-modules-s6000/debian/rules | 32 + .../modules/Makefile | 1 + .../modules/dell_s6000_platform.c | 1222 +++++++++++ .../scripts/reset-qsfp | 25 + .../scripts/set-fan-speed | 58 + .../systemd/platform-modules-s6000.service | 13 + 62 files changed, 7715 insertions(+), 10 deletions(-) delete mode 160000 platform/broadcom/sonic-platform-modules-dell create mode 100644 platform/broadcom/sonic-platform-modules-dell/.gitignore create mode 100644 platform/broadcom/sonic-platform-modules-dell/LICENSE create mode 100644 platform/broadcom/sonic-platform-modules-dell/README.md create mode 100755 platform/broadcom/sonic-platform-modules-dell/common/dell_i2c_utils.sh create mode 100644 platform/broadcom/sonic-platform-modules-dell/common/dell_pmc.c create mode 100644 platform/broadcom/sonic-platform-modules-dell/common/fstrim.service create mode 100644 platform/broadcom/sonic-platform-modules-dell/common/fstrim.timer create mode 100644 platform/broadcom/sonic-platform-modules-dell/debian/changelog create mode 100644 platform/broadcom/sonic-platform-modules-dell/debian/compat create mode 100644 platform/broadcom/sonic-platform-modules-dell/debian/control create mode 100755 platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.init create mode 100644 platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.install create mode 100644 platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.postinst create mode 100755 platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.init create mode 100644 platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.install create mode 100644 platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.postinst create mode 100755 platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9264f.init create mode 100644 platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9264f.install create mode 100755 platform/broadcom/sonic-platform-modules-dell/debian/rules create mode 100644 platform/broadcom/sonic-platform-modules-dell/s6100/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-dell/s6100/modules/dell_s6100_iom_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-dell/s6100/scripts/README create mode 100755 platform/broadcom/sonic-platform-modules-dell/s6100/scripts/io_rd_wr.py create mode 100755 platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iom_power_off.sh create mode 100755 platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iom_power_on.sh create mode 100755 platform/broadcom/sonic-platform-modules-dell/s6100/scripts/platform_sensors.py create mode 100755 platform/broadcom/sonic-platform-modules-dell/s6100/scripts/s6100_platform.sh create mode 100755 platform/broadcom/sonic-platform-modules-dell/s6100/scripts/sensors create mode 100644 platform/broadcom/sonic-platform-modules-dell/z9100/cfg/z9100-modules.conf create mode 100644 platform/broadcom/sonic-platform-modules-dell/z9100/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-dell/z9100/modules/dell_z9100_cpld.c create mode 100755 platform/broadcom/sonic-platform-modules-dell/z9100/scripts/check_qsfp.sh create mode 100755 platform/broadcom/sonic-platform-modules-dell/z9100/scripts/platform_sensors.py create mode 100755 platform/broadcom/sonic-platform-modules-dell/z9100/scripts/sensors create mode 100755 platform/broadcom/sonic-platform-modules-dell/z9100/scripts/z9100_platform.sh create mode 100644 platform/broadcom/sonic-platform-modules-dell/z9264f/cfg/z9264f-modules.conf create mode 100644 platform/broadcom/sonic-platform-modules-dell/z9264f/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-dell/z9264f/modules/dell_z9264f_fpga_ocores.c create mode 100755 platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/check_qsfp.sh create mode 100755 platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/pcisysfs.py create mode 100755 platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/platform_sensors.py create mode 100755 platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/sensors create mode 100755 platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/z9264f_platform.sh delete mode 160000 platform/broadcom/sonic-platform-modules-s6000 create mode 100644 platform/broadcom/sonic-platform-modules-s6000/.gitignore create mode 100644 platform/broadcom/sonic-platform-modules-s6000/LICENSE create mode 100644 platform/broadcom/sonic-platform-modules-s6000/MAINTAINERS create mode 100644 platform/broadcom/sonic-platform-modules-s6000/README.md create mode 100644 platform/broadcom/sonic-platform-modules-s6000/debian/changelog create mode 100644 platform/broadcom/sonic-platform-modules-s6000/debian/compat create mode 100644 platform/broadcom/sonic-platform-modules-s6000/debian/control create mode 100644 platform/broadcom/sonic-platform-modules-s6000/debian/copyright create mode 100755 platform/broadcom/sonic-platform-modules-s6000/debian/platform-modules-s6000.init create mode 100644 platform/broadcom/sonic-platform-modules-s6000/debian/platform-modules-s6000.install create mode 100755 platform/broadcom/sonic-platform-modules-s6000/debian/rules create mode 100644 platform/broadcom/sonic-platform-modules-s6000/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-s6000/modules/dell_s6000_platform.c create mode 100755 platform/broadcom/sonic-platform-modules-s6000/scripts/reset-qsfp create mode 100755 platform/broadcom/sonic-platform-modules-s6000/scripts/set-fan-speed create mode 100644 platform/broadcom/sonic-platform-modules-s6000/systemd/platform-modules-s6000.service diff --git a/.gitmodules b/.gitmodules index 728c417cdba9..72d743e426f5 100644 --- a/.gitmodules +++ b/.gitmodules @@ -36,17 +36,9 @@ [submodule "src/sonic-utilities"] path = src/sonic-utilities url = https://github.com/Azure/sonic-utilities -[submodule "platform/broadcom/sonic-platform-modules-s6000"] - path = platform/broadcom/sonic-platform-modules-s6000 - url = https://github.com/Azure/sonic-platform-modules-s6000 - branch = stretch [submodule "platform/broadcom/sonic-platform-modules-arista"] path = platform/broadcom/sonic-platform-modules-arista url = https://github.com/aristanetworks/sonic -[submodule "platform/broadcom/sonic-platform-modules-dell"] - path = platform/broadcom/sonic-platform-modules-dell - url = https://github.com/Azure/sonic-platform-modules-dell - branch = stretch [submodule "src/sonic-platform-common"] path = src/sonic-platform-common url = https://github.com/Azure/sonic-platform-common diff --git a/platform/broadcom/sonic-platform-modules-dell b/platform/broadcom/sonic-platform-modules-dell deleted file mode 160000 index ae36817bbabc..000000000000 --- a/platform/broadcom/sonic-platform-modules-dell +++ /dev/null @@ -1 +0,0 @@ -Subproject commit ae36817bbabc2825f184b5e7cdad5422b4f1d9db diff --git a/platform/broadcom/sonic-platform-modules-dell/.gitignore b/platform/broadcom/sonic-platform-modules-dell/.gitignore new file mode 100644 index 000000000000..7f287d538227 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/.gitignore @@ -0,0 +1,50 @@ +# Object files +*.o +*.ko +*.obj +*.elf + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su + +# Kernel Module Compile Results +*.mod* +*.cmd +*.o.d +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf + +# Debian packaging +*.debhelper.log +*.postinst.debhelper +*.postrm.debhelper +*.prerm.debhelper +*.substvars diff --git a/platform/broadcom/sonic-platform-modules-dell/LICENSE b/platform/broadcom/sonic-platform-modules-dell/LICENSE new file mode 100644 index 000000000000..243a846ea80b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/LICENSE @@ -0,0 +1,16 @@ +Copyright (C) 2016 Microsoft, Inc +Copyright (C) 2017 Dell, Inc + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/broadcom/sonic-platform-modules-dell/README.md b/platform/broadcom/sonic-platform-modules-dell/README.md new file mode 100644 index 000000000000..a9f5358192ad --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/README.md @@ -0,0 +1 @@ +platform drivers for Dell Z9100 for the SONiC project diff --git a/platform/broadcom/sonic-platform-modules-dell/common/dell_i2c_utils.sh b/platform/broadcom/sonic-platform-modules-dell/common/dell_i2c_utils.sh new file mode 100755 index 000000000000..896e0166dc59 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/common/dell_i2c_utils.sh @@ -0,0 +1,62 @@ +# Perform an i2c device configuration : instantiate / delete. +# Input is of the form: +# "echo [driver] > " +# where operation = "new_device" or "delete_device" + +i2c_config() { + local count=0 + local MAX_BUS_RETRY=20 + local MAX_I2C_OP_RETRY=10 + + i2c_bus_op=`echo "$@" | cut -d'>' -f 2` + i2c_bus=$(dirname $i2c_bus_op) + + # check if bus exists + while [[ "$count" -lt "$MAX_BUS_RETRY" ]]; do + [[ -e $i2c_bus ]] && break || sleep .1 + count=$((count+1)) + done + + if [[ "$count" -eq "$MAX_BUS_RETRY" ]]; then + echo "ERROR: $@ : i2c bus not created" + return + fi + + # perform the add/delete + count=0 + while [[ "$count" -lt "$MAX_I2C_OP_RETRY" ]]; do + eval "$@" > /dev/null 2>&1 + [[ $? == 0 ]] && break || sleep .2 + count=$((count+1)) + done + + if [[ "$count" -eq "$MAX_I2C_OP_RETRY" ]]; then + echo "ERROR: $@ : i2c operation failed" + return + fi +} + +# Check if a i2c bus exists. Poll for upto 2 seconds since mux creation may take time.. +# Input: bus to check for existence + +i2c_poll_bus_exists() { + local count=0 + local MAX_BUS_RETRY=20 + local i2c_bus + + i2c_bus=$1 + + # check if bus exists + while [[ "$count" -lt "$MAX_BUS_RETRY" ]]; do + [[ -e $i2c_bus ]] && break || sleep .1 + count=$((count+1)) + done + + if [[ "$count" -eq "$MAX_BUS_RETRY" ]]; then + echo "ERROR: $@ : i2c bus not created" + return 1 + else + return 0 + fi +} + diff --git a/platform/broadcom/sonic-platform-modules-dell/common/dell_pmc.c b/platform/broadcom/sonic-platform-modules-dell/common/dell_pmc.c new file mode 100644 index 000000000000..557976457503 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/common/dell_pmc.c @@ -0,0 +1,1919 @@ +/* Copyright (c) 2017 Dell Inc.* + * dell_s6100_smf.c - driver for Dell SMF + * + * Author: Per Fremrot + * Author: Paavaanan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define SIO_DRVNAME "SMF" +#define DEBUG 1 +#define LABELS 1 + +#define FANIN_MAX 12 /* Counted from 1 */ +#define VSEN_MAX 48 /* VSEN1.. */ +#define CURR_MAX 6 +#define TCPU_MAX 15 +#define PSU_MAX 4 /* TODO change to actual sensors */ + +/* Where are the sensors address/data + registers relative to the region offset */ + +#define IOREGION_OFFSET 0x10 +#define IOREGION_LENGTH 0x4 +#define SMF_ADDR_REG_OFFSET 0 +#define SMF_READ_DATA_REG_OFFSET 2 +#define SMF_REG_ADDR 0x200 +#define SMF_PROBE_ADDR 0x210 + +#define SIO_REG_DEVID 0x1 +#define SIO_Z9100_ID 0x1 +#define SIO_S6100_ID 0x2 +#define SIO_S4200_ID 0x3 +#define SIO_S5148_ID 0x4 + +/* IOM presence */ +#define IO_MODULE_STATUS 0x0310 +#define IO_MODULE_PRESENCE 0x0311 + +/* FAN Tray */ +#define S6100_MAX_NUM_FAN_TRAYS 4 +#define Z9100_MAX_NUM_FAN_TRAYS 5 + +#define MAX_NUM_FAN_TRAYS 0x00F0 +#define MAX_NUM_FANS_PER_TRAY 0x00F1 +#define FAN_TRAY_PRESENCE 0x0113 +#define FAN_STATUS_GROUP_A 0x0114 +#define FAN_STATUS_GROUP_B 0x0115 +#define FAN_TRAY_AIRFLOW 0x0116 + + +/* FAN Z9100 */ +#define SMF_FAN_SPEED_ADDR 0x00F3 +#define FAN_TRAY_1_SPEED 0x00F3 +#define FAN_TRAY_1_FAN_2_SPEED 0x00F5 +#define FAN_TRAY_2_SPEED 0x00F7 +#define FAN_TRAY_2_FAN_2_SPEED 0x00F9 +#define FAN_TRAY_3_SPEED 0x00FB +#define FAN_TRAY_3_FAN_2_SPEED 0x00FD +#define FAN_TRAY_4_SPEED 0x00FF +#define FAN_TRAY_4_FAN_2_SPEED 0x0101 +#define FAN_TRAY_5_FAN_1_SPEED 0x0103 +#define FAN_TRAY_5_FAN_2_SPEED 0x0105 +#define FAN_TRAY_5 4 +#define FAN_601_FAULT (2 + 1) +#define IN28_INPUT (27 + 1) +#define IN404_INPUT (43 + 1) +#define IOM_PRESENCE (44 + 1) +#define IOM_PRESENCE_MAX (45 + 1) +#define IN602_INPUT (1 + 1) +#define CURR22_INPUT (1 + 1) +#define CURR602_INPUT (3 + 1) +#define TEMP13_INPUT (12 + 1) +#define TEMP601_INPUT (13 + 1) + +/* PSUs */ +#define S6100_MAX_NUM_PSUS 2 +#define MAX_NUM_PSUS 0x0231 +#define CURRENT_TOTAL_POWER 0x0232 + +/* PSU1 */ +#define PSU_1_MAX_POWER 0x0234 +#define PSU_1_FUNCTION_SUPPORT 0x0236 +#define PSU_1_STATUS 0x0237 +#define PSU_1_TEMPERATURE 0x0239 +#define PSU_1_FAN_SPEED 0x023B +#define PSU_1_FAN_STATUS 0x023D +#define PSU_1_INPUT_VOLTAGE 0x023E +#define PSU_1_OUTPUT_VOLTAGE 0x0240 +#define PSU_1_INPUT_CURRENT 0x0242 +#define PSU_1_OUTPUT_CURRENT 0x0244 +#define PSU_1_INPUT_POWER 0x0246 +#define PSU_1_OUTPUT_POWER 0x0248 +#define PSU_1_FAN_SPEED 0x023B + +/* PSU2 */ +#define PSU_2_MAX_POWER 0x026D +#define PSU_2_FUNCTION_SUPPORT 0x026F +#define PSU_2_STATUS 0x0270 +#define PSU_2_TEMPERATURE 0x0272 +#define PSU_2_FAN_SPEED 0x0274 +#define PSU_2_FAN_STATUS 0x0276 +#define PSU_2_INPUT_VOLTAGE 0x0277 +#define PSU_2_OUTPUT_VOLTAGE 0x0279 +#define PSU_2_INPUT_CURRENT 0x027B +#define PSU_2_OUTPUT_CURRENT 0x027D +#define PSU_2_INPUT_POWER 0x027F +#define PSU_2_OUTPUT_POWER 0x0281 + +/* TEMP */ +#define TEMP_SENSOR_1 0x0014 +#define TEMP_SENSOR_1_STATUS 0x00DC +#define TEMP_SENSOR_1_HW_LIMIT 0x003E + +/* VOLTAGE */ +#define CPU_1_VOLTAGE 0x02A8 +#define IO_MODULE_1_VOLTAGE 0x02E8 +#define SWITCH_CURRENT_S6100 0x02E4 +#define SWITCH_CURRENT_Z9100 0x02E2 + +/* VOLTAGE S6100 */ +#define CPU_1_MONITOR_STATUS 0x0308 +#define CPU_2_MONITOR_STATUS 0x0309 +#define CPU_3_MONITOR_STATUS 0x030A +#define CPU_4_MONITOR_STATUS 0x030B + +/* VOLTAGE Z9100 */ +#define CPU_5_MONITOR_STATUS 0x02E6 +#define CPU_6_MONITOR_STATUS 0x02E7 +#define CPU_7_MONITOR_STATUS 0x02E8 +#define CPU_8_MONITOR_STATUS 0x02E9 + + +unsigned long *mmio; +static struct kobject *dell_kobj; +static unsigned short force_id; +module_param(force_id, ushort, 0); +int smf_ver; + + +enum kinds { + z9100smf, s6100smf +}; + + +struct smf_devices { + const char *name; + u64 tcpu_mask; + u64 vsen_mask; + u32 curr_mask; + u64 fanin_mask; + u64 psu_mask; + const char *const *temp_label; + const char *const *vsen_label; + const char *const *curr_label; + const char *const *fan_label; + const char *const *psu_label; +}; + + +static const char *const z9100_temp_label[] = { + "CPU On-board (U2900)", + "BCM Switch On-Board #1 (U44)", + "Front BCM On-Board (U4)", + "Front BCM On-Board (U2)", + "Unused", + "BCM Switch On-Board #1 (U38)", + "Unused", + "Unused", + "Rear (U2900)", + "", + "", + "", + "", + "", + "PSU 1", + "PSU 2" +}; + + +static const char *const s6100_temp_label[] = { + "CPU On-board (U2900)", + "BCM On-Board #1 (U44)", + "Front BCM On-board (U4)", + "Front BCM On-board (U2)", + "IOM #1", + "IOM #2", + "IOM #3", + "IOM #4", + "U2 Switch board?", + "Front GE", + "Front SFP+", + "BCM Internal", + "CPU Internal", + "", + "PSU 1", + "PSU 2" +}; + + +static const char *const z9100_vsen_label[] = { + /* CPU Board */ + "CPU XP3R3V_EARLY", + "CPU XP5R0V_CP", + "CPU XP3R3V_STD", + "CPU XP3R3V_CP ", + "CPU XP0R75V_VTT_A", + "CPU XP0R75V_VTT_B", + "CPU XP1R07V_CPU", + "CPU XP1R0V_CPU", + "CPU XP12R0V", + "CPU VDDR_CPU_2", + "CPU VDDR_CPU_1", + "CPU XP1R5V_CLK", + "CPU XP1R35V_CPU", + "CPU XP1R8V_CPU", + "CPU XP1R0V_CPU_VNN", + "CPU XP1R0V_CPU_VCC", + "CPU XP1R5V_EARLY", + /* Switch Board */ + "SW XP12R0V_MON", + "SW XP3R3V_MON", + "SW XP1R8V_MON", + "SW XP1R25V_MON", + "SW XP1R2V_MON", + "SW XP1R0V_SW_MON", + "SW XP1R0V_ROV_SW_MON", + "SW XP5V_MB_MON", + "SW XP1R8V_FPGA_MON", + "SW XP3R3V_FPGA_MON", + "SW XP3R3V_EARLY_MON", + /* PSU */ + "PSU1 VIN", + "PSU1 VOUT", + "PSU2 VIN", + "PSU2 VOUT", + /* IOM 1 */ + "", + "", + "", + "", + /* IOM 2 */ + "", + "", + "", + "", + /* IOM 3 */ + "", + "", + "", + "", + /* IOM 4 */ + "", + "", + "", + "" +}; + + +static const char *const s6100_vsen_label[] = { + /* CPU Board */ + "CPU XP3R3V_EARLY", + "CPU XP5R0V_CP", + "CPU XP3R3V_STD", + "CPU XP3R3V_CP ", + "CPU XP0R75V_VTT_A", + "CPU XP0R75V_VTT_B", + "CPU XP1R07V_CPU", + "CPU XP1R0V_CPU", + "CPU XP12R0V", + "CPU VDDR_CPU_2", + "CPU VDDR_CPU_1", + "CPU XP1R5V_CLK", + "CPU XP1R35V_CPU", + "CPU XP1R8V_CPU", + "CPU XP1R0V_CPU_VNN", + "CPU XP1R0V_CPU_VCC", + "CPU XP1R5V_EARLY", + /* Switch Board */ + "SW XP12R0V_MON", + "SW XP3R3V_MON", + "SW XP1R8V_MON", + "SW XP1R25V_MON", + "SW XP1R2V_MON", + "SW XP1R0V_SW_MON", + "SW XP1R0V_ROV_SW_MON", + "XR1R0V_BCM84752_MON", + "SW XP5V_MB_MON", + "SW XP1R8V_FPGA_MON", + "SW XP3R3V_FPGA_MON", + + /* PSU */ + "PSU1 VIN", + "PSU1 VOUT", + "PSU2 VIN", + "PSU2 VOUT", + + /* IOM 1 */ + "IOM 1 #1", + "IOM 1 #2", + "IOM 1 #3", + "IOM 1 #4", + /* IOM 2 */ + "IOM 2 #1", + "IOM 2 #2", + "IOM 2 #3", + "IOM 2 #4", + /* IOM 1 */ + "IOM 3 #1", + "IOM 3 #2", + "IOM 3 #3", + "IOM 3 #4", + /* IOM 1 */ + "IOM 4 #1", + "IOM 4 #2", + "IOM 4 #3", + "IOM 4 #4" +}; + + +static const char *const z9100_curr_label[] = { + "XP1R0V", + "XP1R0V_ROV" +}; + + +static const char *const s6100_fan_label[] = { + "Tray1 Fan1", + "", + "Tray2 Fan1", + "", + "Tray3 Fan1", + "", + "Tray4 Fan1", + "", + "", + "", + "Psu1 Fan", + "Psu2 Fan" +}; + +static const char *const z9100_fan_label[] = { + "Tray1 Fan1", + "Tray1 Fan2", + "Tray2 Fan1", + "Tray2 Fan2", + "Tray3 Fan1", + "Tray3 Fan2", + "Tray4 Fan1", + "Tray4 Fan2", + "Tray5 Fan1", + "Tray5 Fan2", + "Psu1 Fan", + "Psu2 Fan" +}; + + +static const char *const s6100_psu_label[] = { + "Psu1 Input", + "Psu1 Output", + "Psu2 Input", + "Psu2 Output", +}; + +static const struct smf_devices smf_devices[] = { + [z9100smf] = { + .name = "SMF_Z9100_ON", + .tcpu_mask=0xe1ff, + .vsen_mask=0xfffdffff, + .curr_mask=0x3f, + .fanin_mask=0xfff, + .psu_mask=0xf, + .temp_label = z9100_temp_label, + .vsen_label = z9100_vsen_label, + .curr_label = z9100_curr_label, + .fan_label = z9100_fan_label, + .psu_label = s6100_psu_label + }, + [s6100smf] = { + .name = "SMF_S6100_ON", + .tcpu_mask=0x7fff, + .vsen_mask=0xfffffefdffff, + .curr_mask=0x3f, + .fanin_mask=0xc55, + .psu_mask=0xf, + .temp_label = s6100_temp_label, + .vsen_label = s6100_vsen_label, + .curr_label = z9100_curr_label, + .fan_label = s6100_fan_label, + .psu_label = s6100_psu_label + + } +}; + + +/* + * For each registered chip, we need to keep some data in memory. + * The structure is dynamically allocated. + */ +struct smf_data { + enum kinds kind; /* Inherited from SuperIO kind */ + unsigned short addr; + struct device *hwmon_dev; + struct mutex lock; + u64 tcpu_mask; + u64 vsen_mask; + u32 curr_mask; + u64 fanin_mask; + u64 psu_mask; + const char * const *temp_label; + const char * const *vsen_label; + const char * const *curr_label; + const char * const *fan_label; + const char * const *psu_label; +}; + + +struct smf_sio_data { + int sioreg; + enum kinds kind; +}; + + +static int smf_read_reg(struct smf_data *data, u16 reg) +{ + int res; + + mutex_lock(&data->lock); + outb_p(reg>> 8, data->addr + SMF_ADDR_REG_OFFSET); + outb_p(reg & 0xff, data->addr + SMF_ADDR_REG_OFFSET + 1); + res = inb_p(data->addr + SMF_READ_DATA_REG_OFFSET); + mutex_unlock(&data->lock); + return res; +} + + +static int smf_read_reg16(struct smf_data *data, u16 reg) +{ + int res; + + mutex_lock(&data->lock); + outb_p(reg>> 8, data->addr + SMF_ADDR_REG_OFFSET); + outb_p(reg & 0xff, data->addr + SMF_ADDR_REG_OFFSET + 1); + + res = inb_p(data->addr + SMF_READ_DATA_REG_OFFSET); + + outb_p((reg + 1)>> 8, data->addr + SMF_ADDR_REG_OFFSET); + outb_p((reg + 1) & 0xff, data->addr + SMF_ADDR_REG_OFFSET + 1); + + res = (res << 8) + inb_p(data->addr + SMF_READ_DATA_REG_OFFSET); + + mutex_unlock(&data->lock); + return res; +} + + +/* FANIN ATTR */ +static ssize_t +show_fan_label(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct smf_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr(attr)->index; + return sprintf(buf, "%s\n", data->fan_label[nr]); +} + + +static ssize_t show_fan(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int export_hex=0; + unsigned int ret = -1; + unsigned rpm; + + + if (index <10) + ret = smf_read_reg16(data, SMF_FAN_SPEED_ADDR + index * 2); + else switch (index) { + case 10: + ret = smf_read_reg16(data, PSU_1_FAN_SPEED); + break; + case 11: + ret = smf_read_reg16(data, PSU_2_FAN_SPEED); + break; + case 12: + ret = ~smf_read_reg(data, FAN_TRAY_PRESENCE); + export_hex = 1; + break; + + default: + return ret; + } + + + if (ret < 0) + return ret; + + rpm = ret; + + if(export_hex) + return sprintf(buf, "%x\n", rpm); + else + return sprintf(buf, "%u\n", rpm); +} + + +static ssize_t show_fan_fault(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret=1, fan_status; + + index = index / 2; + fan_status = ~smf_read_reg(data, FAN_TRAY_PRESENCE); + + if (fan_status & (1 << (index))) + ret=0; + + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + + +static ssize_t show_fan_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret, psu_fan_status=0; + + if(index < 2) + psu_fan_status = smf_read_reg(data, FAN_STATUS_GROUP_B); + + if (psu_fan_status & (1 << (index))) + ret=0; + + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + + +static ssize_t show_fan_airflow(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret=1, fan_airflow; + + if (data->kind == s6100smf && index == FAN_TRAY_5) + return 0; + + fan_airflow = smf_read_reg(data, FAN_TRAY_AIRFLOW); + + if (fan_airflow & (1 << (index))) + ret=1; + + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + + +static ssize_t show_psu_fan(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret=0, fan_status; + + if (index < FAN_601_FAULT){ + fan_status = smf_read_reg(data, PSU_1_FAN_STATUS); + ret = fan_status & (1 << index); + + } + else{ + fan_status = smf_read_reg(data, PSU_2_FAN_STATUS); + ret = fan_status & (1 << (index - 3)); + } + + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + + + +static umode_t smf_fanin_is_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct smf_data *data = dev_get_drvdata(dev); + + if (data->fanin_mask & (1 << (n % FANIN_MAX))) + return a->mode; + + return 0; +} + +static umode_t smf_dell_is_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + return a->mode; + +} + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan, NULL, 7); +static SENSOR_DEVICE_ATTR(fan9_input, S_IRUGO, show_fan, NULL, 8); +static SENSOR_DEVICE_ATTR(fan10_input, S_IRUGO, show_fan, NULL,9); +/* PSU1 FAN */ +static SENSOR_DEVICE_ATTR(fan11_input, S_IRUGO, show_fan, NULL, 10); +/* PSU2 FAN */ +static SENSOR_DEVICE_ATTR(fan12_input, S_IRUGO, show_fan, NULL, 11); + +static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_fan_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_fan_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_fan_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_fan_alarm, NULL, 7); +static SENSOR_DEVICE_ATTR(fan9_alarm, S_IRUGO, show_fan_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(fan10_alarm, S_IRUGO, show_fan_alarm, NULL, 9); +static SENSOR_DEVICE_ATTR(fan11_alarm, S_IRUGO, show_psu_fan, NULL, 1); +static SENSOR_DEVICE_ATTR(fan12_alarm, S_IRUGO, show_psu_fan, NULL, 4); + +static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_fault, S_IRUGO, show_fan_fault, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_fault, S_IRUGO, show_fan_fault, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_fault, S_IRUGO, show_fan_fault, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_fault, S_IRUGO, show_fan_fault, NULL, 7); +static SENSOR_DEVICE_ATTR(fan9_fault, S_IRUGO, show_fan_fault, NULL, 8); +static SENSOR_DEVICE_ATTR(fan10_fault, S_IRUGO, show_fan_fault, NULL, 9); +static SENSOR_DEVICE_ATTR(fan11_fault, S_IRUGO, show_psu_fan, NULL, 2); +static SENSOR_DEVICE_ATTR(fan12_fault, S_IRUGO, show_psu_fan, NULL, 5); + +static SENSOR_DEVICE_ATTR(fan1_label, S_IRUGO, show_fan_label, NULL, 0); +static SENSOR_DEVICE_ATTR(fan2_label, S_IRUGO, show_fan_label, NULL, 1); +static SENSOR_DEVICE_ATTR(fan3_label, S_IRUGO, show_fan_label, NULL, 2); +static SENSOR_DEVICE_ATTR(fan4_label, S_IRUGO, show_fan_label, NULL, 3); +static SENSOR_DEVICE_ATTR(fan5_label, S_IRUGO, show_fan_label, NULL, 4); +static SENSOR_DEVICE_ATTR(fan6_label, S_IRUGO, show_fan_label, NULL, 5); +static SENSOR_DEVICE_ATTR(fan7_label, S_IRUGO, show_fan_label, NULL, 6); +static SENSOR_DEVICE_ATTR(fan8_label, S_IRUGO, show_fan_label, NULL, 7); +static SENSOR_DEVICE_ATTR(fan9_label, S_IRUGO, show_fan_label, NULL, 8); +static SENSOR_DEVICE_ATTR(fan10_label, S_IRUGO, show_fan_label, NULL, 9); +static SENSOR_DEVICE_ATTR(fan11_label, S_IRUGO, show_fan_label, NULL, 10); +static SENSOR_DEVICE_ATTR(fan12_label, S_IRUGO, show_fan_label, NULL, 11); + + +static struct attribute *smf_fanin_attrs[] = { + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + &sensor_dev_attr_fan9_input.dev_attr.attr, + &sensor_dev_attr_fan10_input.dev_attr.attr, + &sensor_dev_attr_fan11_input.dev_attr.attr, + &sensor_dev_attr_fan12_input.dev_attr.attr, + + &sensor_dev_attr_fan1_label.dev_attr.attr, + &sensor_dev_attr_fan2_label.dev_attr.attr, + &sensor_dev_attr_fan3_label.dev_attr.attr, + &sensor_dev_attr_fan4_label.dev_attr.attr, + &sensor_dev_attr_fan5_label.dev_attr.attr, + &sensor_dev_attr_fan6_label.dev_attr.attr, + &sensor_dev_attr_fan7_label.dev_attr.attr, + &sensor_dev_attr_fan8_label.dev_attr.attr, + &sensor_dev_attr_fan9_label.dev_attr.attr, + &sensor_dev_attr_fan10_label.dev_attr.attr, + &sensor_dev_attr_fan11_label.dev_attr.attr, + &sensor_dev_attr_fan12_label.dev_attr.attr, + + + &sensor_dev_attr_fan1_alarm.dev_attr.attr, + &sensor_dev_attr_fan2_alarm.dev_attr.attr, + &sensor_dev_attr_fan3_alarm.dev_attr.attr, + &sensor_dev_attr_fan4_alarm.dev_attr.attr, + &sensor_dev_attr_fan5_alarm.dev_attr.attr, + &sensor_dev_attr_fan6_alarm.dev_attr.attr, + &sensor_dev_attr_fan7_alarm.dev_attr.attr, + &sensor_dev_attr_fan8_alarm.dev_attr.attr, + &sensor_dev_attr_fan9_alarm.dev_attr.attr, + &sensor_dev_attr_fan10_alarm.dev_attr.attr, + &sensor_dev_attr_fan11_alarm.dev_attr.attr, + &sensor_dev_attr_fan12_alarm.dev_attr.attr, + + &sensor_dev_attr_fan1_fault.dev_attr.attr, + &sensor_dev_attr_fan2_fault.dev_attr.attr, + &sensor_dev_attr_fan3_fault.dev_attr.attr, + &sensor_dev_attr_fan4_fault.dev_attr.attr, + &sensor_dev_attr_fan5_fault.dev_attr.attr, + &sensor_dev_attr_fan6_fault.dev_attr.attr, + &sensor_dev_attr_fan7_fault.dev_attr.attr, + &sensor_dev_attr_fan8_fault.dev_attr.attr, + &sensor_dev_attr_fan9_fault.dev_attr.attr, + &sensor_dev_attr_fan10_fault.dev_attr.attr, + &sensor_dev_attr_fan11_fault.dev_attr.attr, + &sensor_dev_attr_fan12_fault.dev_attr.attr, + + NULL +}; + + + + +/* VSEN ATTR */ +static ssize_t +show_voltage_label(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct smf_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr(attr)->index; + return sprintf(buf, "%s\n", data->vsen_label[nr]); +} + + +static ssize_t show_voltage(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int volt, ret=0; + int export_hex=0; + + /*0 to 27 */ + if (index < IN28_INPUT) /* Voltage sensors */ + ret = smf_read_reg16(data, CPU_1_VOLTAGE + index * 2); + else if ((data->kind == s6100smf) && (index < IN404_INPUT)) + ret = smf_read_reg16(data, IO_MODULE_1_VOLTAGE + index * 2); + else if ((data->kind == s6100smf) && (index < IOM_PRESENCE)) + ret = smf_read_reg(data, IO_MODULE_STATUS); + else if ((data->kind == s6100smf) && (index < IOM_PRESENCE_MAX)) + ret = smf_read_reg(data, IO_MODULE_PRESENCE); + + if (ret < 0) + return ret; + + if(index < 44) + volt = ret*10; + else + export_hex=1; + + if(export_hex) + return sprintf(buf, "%x\n", ret); + else + return sprintf(buf, "%d\n", volt); +} + + +static ssize_t show_psu_voltage(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret; + + if (index < 2) /* PSU1 */ + ret = smf_read_reg16(data, PSU_1_INPUT_VOLTAGE + index * 2); + else /* PSU2 */ + ret = smf_read_reg16(data, PSU_2_INPUT_VOLTAGE + ((index - 2) * 2)); + + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret*10); +} + + +static ssize_t show_voltage_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + unsigned status=0; + int ret; + + if (index < 8) { + + if (data->kind == s6100smf) + status = smf_read_reg16(data, CPU_1_MONITOR_STATUS); + else + status = smf_read_reg16(data, CPU_5_MONITOR_STATUS); + + ret = status & (1 << index); + } + else if (index < 15) { + + if (data->kind == s6100smf) + ret = smf_read_reg16(data, CPU_2_MONITOR_STATUS); + else + ret = smf_read_reg16(data, CPU_6_MONITOR_STATUS); + + ret = status & (1 << index); + } + else if (index < 23) { + + if (data->kind == s6100smf) + ret = smf_read_reg16(data, CPU_3_MONITOR_STATUS); + else + ret = smf_read_reg16(data, CPU_7_MONITOR_STATUS); + + ret = status & (1 << index); + } + else { + + if (data->kind == s6100smf) + ret = smf_read_reg16(data, CPU_4_MONITOR_STATUS); + else + ret = smf_read_reg16(data, CPU_8_MONITOR_STATUS); + + ret = status & (1 << index); + } + + + if (ret < 0) + return ret; + + return sprintf(buf, "%d\n", ret); +} + + +static umode_t smf_vsen_is_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct smf_data *data = dev_get_drvdata(dev); + + if (data->vsen_mask & (1 << (n % VSEN_MAX))) + return a->mode; + return 0; +} + +static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_voltage, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_voltage, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_voltage, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_voltage, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_input, S_IRUGO, show_voltage, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_input, S_IRUGO, show_voltage, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_input, S_IRUGO, show_voltage, NULL, 12); +static SENSOR_DEVICE_ATTR(in14_input, S_IRUGO, show_voltage, NULL, 13); +static SENSOR_DEVICE_ATTR(in15_input, S_IRUGO, show_voltage, NULL, 14); +static SENSOR_DEVICE_ATTR(in16_input, S_IRUGO, show_voltage, NULL, 15); +static SENSOR_DEVICE_ATTR(in17_input, S_IRUGO, show_voltage, NULL, 16); +static SENSOR_DEVICE_ATTR(in18_input, S_IRUGO, show_voltage, NULL, 17); +static SENSOR_DEVICE_ATTR(in19_input, S_IRUGO, show_voltage, NULL, 18); +static SENSOR_DEVICE_ATTR(in20_input, S_IRUGO, show_voltage, NULL, 19); +static SENSOR_DEVICE_ATTR(in21_input, S_IRUGO, show_voltage, NULL, 20); +static SENSOR_DEVICE_ATTR(in22_input, S_IRUGO, show_voltage, NULL, 21); +static SENSOR_DEVICE_ATTR(in23_input, S_IRUGO, show_voltage, NULL, 22); +static SENSOR_DEVICE_ATTR(in24_input, S_IRUGO, show_voltage, NULL, 23); +static SENSOR_DEVICE_ATTR(in25_input, S_IRUGO, show_voltage, NULL, 24); +static SENSOR_DEVICE_ATTR(in26_input, S_IRUGO, show_voltage, NULL, 25); +static SENSOR_DEVICE_ATTR(in27_input, S_IRUGO, show_voltage, NULL, 26); +static SENSOR_DEVICE_ATTR(in28_input, S_IRUGO, show_voltage, NULL, 27); + +/* PSU1 Voltage*/ +static SENSOR_DEVICE_ATTR(in29_input, S_IRUGO, show_psu_voltage, NULL, 0); +static SENSOR_DEVICE_ATTR(in30_input, S_IRUGO, show_psu_voltage, NULL, 1); + +/* PSU2 Voltage*/ +static SENSOR_DEVICE_ATTR(in31_input, S_IRUGO, show_psu_voltage, NULL, 2); +static SENSOR_DEVICE_ATTR(in32_input, S_IRUGO, show_psu_voltage, NULL, 3); + +/*IO Modules Voltage*/ +static SENSOR_DEVICE_ATTR(in101_input, S_IRUGO, show_voltage, NULL, 28); +static SENSOR_DEVICE_ATTR(in102_input, S_IRUGO, show_voltage, NULL, 29); +static SENSOR_DEVICE_ATTR(in103_input, S_IRUGO, show_voltage, NULL, 30); +static SENSOR_DEVICE_ATTR(in104_input, S_IRUGO, show_voltage, NULL, 31); +static SENSOR_DEVICE_ATTR(in201_input, S_IRUGO, show_voltage, NULL, 32); +static SENSOR_DEVICE_ATTR(in202_input, S_IRUGO, show_voltage, NULL, 33); +static SENSOR_DEVICE_ATTR(in203_input, S_IRUGO, show_voltage, NULL, 34); +static SENSOR_DEVICE_ATTR(in204_input, S_IRUGO, show_voltage, NULL, 35); +static SENSOR_DEVICE_ATTR(in301_input, S_IRUGO, show_voltage, NULL, 36); +static SENSOR_DEVICE_ATTR(in302_input, S_IRUGO, show_voltage, NULL, 37); +static SENSOR_DEVICE_ATTR(in303_input, S_IRUGO, show_voltage, NULL, 38); +static SENSOR_DEVICE_ATTR(in304_input, S_IRUGO, show_voltage, NULL, 39); +static SENSOR_DEVICE_ATTR(in401_input, S_IRUGO, show_voltage, NULL, 40); +static SENSOR_DEVICE_ATTR(in402_input, S_IRUGO, show_voltage, NULL, 41); +static SENSOR_DEVICE_ATTR(in403_input, S_IRUGO, show_voltage, NULL, 42); +static SENSOR_DEVICE_ATTR(in404_input, S_IRUGO, show_voltage, NULL, 43); + + + +static SENSOR_DEVICE_ATTR(in1_label, S_IRUGO, show_voltage_label, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_label, S_IRUGO, show_voltage_label, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_label, S_IRUGO, show_voltage_label, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_label, S_IRUGO, show_voltage_label, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_label, S_IRUGO, show_voltage_label, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_label, S_IRUGO, show_voltage_label, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_label, S_IRUGO, show_voltage_label, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_label, S_IRUGO, show_voltage_label, NULL, 7); +static SENSOR_DEVICE_ATTR(in9_label, S_IRUGO, show_voltage_label, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_label, S_IRUGO, show_voltage_label, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_label, S_IRUGO, show_voltage_label, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_label, S_IRUGO, show_voltage_label, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_label, S_IRUGO, show_voltage_label, NULL, 12); +static SENSOR_DEVICE_ATTR(in14_label, S_IRUGO, show_voltage_label, NULL, 13); +static SENSOR_DEVICE_ATTR(in15_label, S_IRUGO, show_voltage_label, NULL, 14); +static SENSOR_DEVICE_ATTR(in16_label, S_IRUGO, show_voltage_label, NULL, 15); +static SENSOR_DEVICE_ATTR(in17_label, S_IRUGO, show_voltage_label, NULL, 16); +static SENSOR_DEVICE_ATTR(in18_label, S_IRUGO, show_voltage_label, NULL, 17); +static SENSOR_DEVICE_ATTR(in19_label, S_IRUGO, show_voltage_label, NULL, 18); +static SENSOR_DEVICE_ATTR(in20_label, S_IRUGO, show_voltage_label, NULL, 19); +static SENSOR_DEVICE_ATTR(in21_label, S_IRUGO, show_voltage_label, NULL, 20); +static SENSOR_DEVICE_ATTR(in22_label, S_IRUGO, show_voltage_label, NULL, 21); +static SENSOR_DEVICE_ATTR(in23_label, S_IRUGO, show_voltage_label, NULL, 22); +static SENSOR_DEVICE_ATTR(in24_label, S_IRUGO, show_voltage_label, NULL, 23); +static SENSOR_DEVICE_ATTR(in25_label, S_IRUGO, show_voltage_label, NULL, 24); +static SENSOR_DEVICE_ATTR(in26_label, S_IRUGO, show_voltage_label, NULL, 25); +static SENSOR_DEVICE_ATTR(in27_label, S_IRUGO, show_voltage_label, NULL, 26); +static SENSOR_DEVICE_ATTR(in28_label, S_IRUGO, show_voltage_label, NULL, 27); + +/* PSU1 Voltage Label*/ +static SENSOR_DEVICE_ATTR(in29_label, S_IRUGO, show_voltage_label, NULL, 28); +static SENSOR_DEVICE_ATTR(in30_label, S_IRUGO, show_voltage_label, NULL, 29); + +/* PSU2 Voltage Label*/ +static SENSOR_DEVICE_ATTR(in31_label, S_IRUGO, show_voltage_label, NULL, 30); +static SENSOR_DEVICE_ATTR(in32_label, S_IRUGO, show_voltage_label, NULL, 31); + +/*IO Modules Labels*/ +static SENSOR_DEVICE_ATTR(in101_label, S_IRUGO, show_voltage_label, NULL, 32); +static SENSOR_DEVICE_ATTR(in102_label, S_IRUGO, show_voltage_label, NULL, 33); +static SENSOR_DEVICE_ATTR(in103_label, S_IRUGO, show_voltage_label, NULL, 34); +static SENSOR_DEVICE_ATTR(in104_label, S_IRUGO, show_voltage_label, NULL, 35); +static SENSOR_DEVICE_ATTR(in201_label, S_IRUGO, show_voltage_label, NULL, 36); +static SENSOR_DEVICE_ATTR(in202_label, S_IRUGO, show_voltage_label, NULL, 37); +static SENSOR_DEVICE_ATTR(in203_label, S_IRUGO, show_voltage_label, NULL, 38); +static SENSOR_DEVICE_ATTR(in204_label, S_IRUGO, show_voltage_label, NULL, 39); +static SENSOR_DEVICE_ATTR(in301_label, S_IRUGO, show_voltage_label, NULL, 40); +static SENSOR_DEVICE_ATTR(in302_label, S_IRUGO, show_voltage_label, NULL, 41); +static SENSOR_DEVICE_ATTR(in303_label, S_IRUGO, show_voltage_label, NULL, 42); +static SENSOR_DEVICE_ATTR(in304_label, S_IRUGO, show_voltage_label, NULL, 43); +static SENSOR_DEVICE_ATTR(in401_label, S_IRUGO, show_voltage_label, NULL, 44); +static SENSOR_DEVICE_ATTR(in402_label, S_IRUGO, show_voltage_label, NULL, 45); +static SENSOR_DEVICE_ATTR(in403_label, S_IRUGO, show_voltage_label, NULL, 46); +static SENSOR_DEVICE_ATTR(in404_label, S_IRUGO, show_voltage_label, NULL, 47); + + + +/* CPU Voltage Alarm */ +static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_voltage_alarm, NULL, 0); +static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_voltage_alarm, NULL, 1); +static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_voltage_alarm, NULL, 2); +static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_voltage_alarm, NULL, 3); +static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_voltage_alarm, NULL, 4); +static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_voltage_alarm, NULL, 5); +static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_voltage_alarm, NULL, 6); +static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_voltage_alarm, NULL, 7); + +static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_voltage_alarm, NULL, 8); +static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_voltage_alarm, NULL, 9); +static SENSOR_DEVICE_ATTR(in11_alarm, S_IRUGO, show_voltage_alarm, NULL, 10); +static SENSOR_DEVICE_ATTR(in12_alarm, S_IRUGO, show_voltage_alarm, NULL, 11); +static SENSOR_DEVICE_ATTR(in13_alarm, S_IRUGO, show_voltage_alarm, NULL, 12); +static SENSOR_DEVICE_ATTR(in14_alarm, S_IRUGO, show_voltage_alarm, NULL, 13); +static SENSOR_DEVICE_ATTR(in15_alarm, S_IRUGO, show_voltage_alarm, NULL, 14); +static SENSOR_DEVICE_ATTR(in16_alarm, S_IRUGO, show_voltage_alarm, NULL, 15); + +static SENSOR_DEVICE_ATTR(in17_alarm, S_IRUGO, show_voltage_alarm, NULL, 16); +static SENSOR_DEVICE_ATTR(in18_alarm, S_IRUGO, show_voltage_alarm, NULL, 17); +static SENSOR_DEVICE_ATTR(in19_alarm, S_IRUGO, show_voltage_alarm, NULL, 18); +static SENSOR_DEVICE_ATTR(in20_alarm, S_IRUGO, show_voltage_alarm, NULL, 19); +static SENSOR_DEVICE_ATTR(in21_alarm, S_IRUGO, show_voltage_alarm, NULL, 20); +static SENSOR_DEVICE_ATTR(in22_alarm, S_IRUGO, show_voltage_alarm, NULL, 21); +static SENSOR_DEVICE_ATTR(in23_alarm, S_IRUGO, show_voltage_alarm, NULL, 22); +static SENSOR_DEVICE_ATTR(in24_alarm, S_IRUGO, show_voltage_alarm, NULL, 23); + +static SENSOR_DEVICE_ATTR(in25_alarm, S_IRUGO, show_voltage_alarm, NULL, 24); +static SENSOR_DEVICE_ATTR(in26_alarm, S_IRUGO, show_voltage_alarm, NULL, 25); +static SENSOR_DEVICE_ATTR(in27_alarm, S_IRUGO, show_voltage_alarm, NULL, 26); +static SENSOR_DEVICE_ATTR(in28_alarm, S_IRUGO, show_voltage_alarm, NULL, 27); + + + +static struct attribute *smf_vsen_attrs[] = { + &sensor_dev_attr_in1_input.dev_attr.attr, + &sensor_dev_attr_in2_input.dev_attr.attr, + &sensor_dev_attr_in3_input.dev_attr.attr, + &sensor_dev_attr_in4_input.dev_attr.attr, + &sensor_dev_attr_in5_input.dev_attr.attr, + &sensor_dev_attr_in6_input.dev_attr.attr, + &sensor_dev_attr_in7_input.dev_attr.attr, + &sensor_dev_attr_in8_input.dev_attr.attr, + &sensor_dev_attr_in9_input.dev_attr.attr, + &sensor_dev_attr_in10_input.dev_attr.attr, + &sensor_dev_attr_in11_input.dev_attr.attr, + &sensor_dev_attr_in12_input.dev_attr.attr, + &sensor_dev_attr_in13_input.dev_attr.attr, + &sensor_dev_attr_in14_input.dev_attr.attr, + &sensor_dev_attr_in15_input.dev_attr.attr, + &sensor_dev_attr_in16_input.dev_attr.attr, + &sensor_dev_attr_in17_input.dev_attr.attr, + &sensor_dev_attr_in18_input.dev_attr.attr, + &sensor_dev_attr_in19_input.dev_attr.attr, + &sensor_dev_attr_in20_input.dev_attr.attr, + &sensor_dev_attr_in21_input.dev_attr.attr, + &sensor_dev_attr_in22_input.dev_attr.attr, + &sensor_dev_attr_in23_input.dev_attr.attr, + &sensor_dev_attr_in24_input.dev_attr.attr, + &sensor_dev_attr_in25_input.dev_attr.attr, + &sensor_dev_attr_in26_input.dev_attr.attr, + &sensor_dev_attr_in27_input.dev_attr.attr, + &sensor_dev_attr_in28_input.dev_attr.attr, + + &sensor_dev_attr_in29_input.dev_attr.attr, + &sensor_dev_attr_in30_input.dev_attr.attr, + &sensor_dev_attr_in31_input.dev_attr.attr, + &sensor_dev_attr_in32_input.dev_attr.attr, + + &sensor_dev_attr_in101_input.dev_attr.attr, + &sensor_dev_attr_in102_input.dev_attr.attr, + &sensor_dev_attr_in103_input.dev_attr.attr, + &sensor_dev_attr_in104_input.dev_attr.attr, + &sensor_dev_attr_in201_input.dev_attr.attr, + &sensor_dev_attr_in202_input.dev_attr.attr, + &sensor_dev_attr_in203_input.dev_attr.attr, + &sensor_dev_attr_in204_input.dev_attr.attr, + &sensor_dev_attr_in301_input.dev_attr.attr, + &sensor_dev_attr_in302_input.dev_attr.attr, + &sensor_dev_attr_in303_input.dev_attr.attr, + &sensor_dev_attr_in304_input.dev_attr.attr, + &sensor_dev_attr_in401_input.dev_attr.attr, + &sensor_dev_attr_in402_input.dev_attr.attr, + &sensor_dev_attr_in403_input.dev_attr.attr, + &sensor_dev_attr_in404_input.dev_attr.attr, + + + &sensor_dev_attr_in1_label.dev_attr.attr, + &sensor_dev_attr_in2_label.dev_attr.attr, + &sensor_dev_attr_in3_label.dev_attr.attr, + &sensor_dev_attr_in4_label.dev_attr.attr, + &sensor_dev_attr_in5_label.dev_attr.attr, + &sensor_dev_attr_in6_label.dev_attr.attr, + &sensor_dev_attr_in7_label.dev_attr.attr, + &sensor_dev_attr_in8_label.dev_attr.attr, + &sensor_dev_attr_in9_label.dev_attr.attr, + &sensor_dev_attr_in10_label.dev_attr.attr, + &sensor_dev_attr_in11_label.dev_attr.attr, + &sensor_dev_attr_in12_label.dev_attr.attr, + &sensor_dev_attr_in13_label.dev_attr.attr, + &sensor_dev_attr_in14_label.dev_attr.attr, + &sensor_dev_attr_in15_label.dev_attr.attr, + &sensor_dev_attr_in16_label.dev_attr.attr, + &sensor_dev_attr_in17_label.dev_attr.attr, + &sensor_dev_attr_in18_label.dev_attr.attr, + &sensor_dev_attr_in19_label.dev_attr.attr, + &sensor_dev_attr_in20_label.dev_attr.attr, + &sensor_dev_attr_in21_label.dev_attr.attr, + &sensor_dev_attr_in22_label.dev_attr.attr, + &sensor_dev_attr_in23_label.dev_attr.attr, + &sensor_dev_attr_in24_label.dev_attr.attr, + &sensor_dev_attr_in25_label.dev_attr.attr, + &sensor_dev_attr_in26_label.dev_attr.attr, + &sensor_dev_attr_in27_label.dev_attr.attr, + &sensor_dev_attr_in28_label.dev_attr.attr, + + &sensor_dev_attr_in29_label.dev_attr.attr, + &sensor_dev_attr_in30_label.dev_attr.attr, + &sensor_dev_attr_in31_label.dev_attr.attr, + &sensor_dev_attr_in32_label.dev_attr.attr, + + &sensor_dev_attr_in101_label.dev_attr.attr, + &sensor_dev_attr_in102_label.dev_attr.attr, + &sensor_dev_attr_in103_label.dev_attr.attr, + &sensor_dev_attr_in104_label.dev_attr.attr, + &sensor_dev_attr_in201_label.dev_attr.attr, + &sensor_dev_attr_in202_label.dev_attr.attr, + &sensor_dev_attr_in203_label.dev_attr.attr, + &sensor_dev_attr_in204_label.dev_attr.attr, + &sensor_dev_attr_in301_label.dev_attr.attr, + &sensor_dev_attr_in302_label.dev_attr.attr, + &sensor_dev_attr_in303_label.dev_attr.attr, + &sensor_dev_attr_in304_label.dev_attr.attr, + &sensor_dev_attr_in401_label.dev_attr.attr, + &sensor_dev_attr_in402_label.dev_attr.attr, + &sensor_dev_attr_in403_label.dev_attr.attr, + &sensor_dev_attr_in404_label.dev_attr.attr, + + + &sensor_dev_attr_in1_alarm.dev_attr.attr, + &sensor_dev_attr_in2_alarm.dev_attr.attr, + &sensor_dev_attr_in3_alarm.dev_attr.attr, + &sensor_dev_attr_in4_alarm.dev_attr.attr, + &sensor_dev_attr_in5_alarm.dev_attr.attr, + &sensor_dev_attr_in6_alarm.dev_attr.attr, + &sensor_dev_attr_in7_alarm.dev_attr.attr, + &sensor_dev_attr_in8_alarm.dev_attr.attr, + &sensor_dev_attr_in9_alarm.dev_attr.attr, + &sensor_dev_attr_in10_alarm.dev_attr.attr, + &sensor_dev_attr_in11_alarm.dev_attr.attr, + &sensor_dev_attr_in12_alarm.dev_attr.attr, + &sensor_dev_attr_in13_alarm.dev_attr.attr, + &sensor_dev_attr_in14_alarm.dev_attr.attr, + &sensor_dev_attr_in15_alarm.dev_attr.attr, + &sensor_dev_attr_in16_alarm.dev_attr.attr, + &sensor_dev_attr_in17_alarm.dev_attr.attr, + &sensor_dev_attr_in18_alarm.dev_attr.attr, + &sensor_dev_attr_in19_alarm.dev_attr.attr, + &sensor_dev_attr_in20_alarm.dev_attr.attr, + &sensor_dev_attr_in21_alarm.dev_attr.attr, + &sensor_dev_attr_in22_alarm.dev_attr.attr, + &sensor_dev_attr_in23_alarm.dev_attr.attr, + &sensor_dev_attr_in24_alarm.dev_attr.attr, + &sensor_dev_attr_in25_alarm.dev_attr.attr, + &sensor_dev_attr_in26_alarm.dev_attr.attr, + &sensor_dev_attr_in27_alarm.dev_attr.attr, + &sensor_dev_attr_in28_alarm.dev_attr.attr, + + + NULL +}; + +static const struct attribute_group smf_vsen_group = { + .attrs = smf_vsen_attrs, + .is_visible = smf_vsen_is_visible, +}; + +/* CURRENT ATTR */ +static ssize_t +show_current_label(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct smf_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr(attr)->index; + return sprintf(buf, "%s\n", data->curr_label[nr]); +} + +static ssize_t show_current(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret=0; + int curr; + + if (index < CURR22_INPUT) + if (data->kind == s6100smf) + ret = smf_read_reg16(data, SWITCH_CURRENT_S6100 + index * 2); + else + ret = smf_read_reg16(data, SWITCH_CURRENT_Z9100 + index * 2); + else if (index < CURR602_INPUT) + curr = smf_read_reg16(data, PSU_1_INPUT_CURRENT + (index % 4) * 2); + else + curr = smf_read_reg16(data, PSU_2_INPUT_CURRENT + (index % 4) * 2); + + + if (ret < 0) + return ret; + + /* TODO: docs say 10mA, value look like A? */ + if(index < 2) + curr = ret*1000; + + return sprintf(buf, "%d\n", curr); +} + + +static umode_t smf_curr_is_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct smf_data *data = dev_get_drvdata(dev); + + if (data->curr_mask & (1 << (n % CURR_MAX))) + return a->mode; + return 0; +} + + +static SENSOR_DEVICE_ATTR(curr21_input, S_IRUGO, show_current, NULL, 0); +static SENSOR_DEVICE_ATTR(curr22_input, S_IRUGO, show_current, NULL, 1); + +static SENSOR_DEVICE_ATTR(curr601_input, S_IRUGO, show_current, NULL, 2); +static SENSOR_DEVICE_ATTR(curr602_input, S_IRUGO, show_current, NULL, 3); + +static SENSOR_DEVICE_ATTR(curr701_input, S_IRUGO, show_current, NULL, 4); +static SENSOR_DEVICE_ATTR(curr702_input, S_IRUGO, show_current, NULL, 5); + +static SENSOR_DEVICE_ATTR(curr21_label, S_IRUGO, show_current_label, NULL, 0); +static SENSOR_DEVICE_ATTR(curr22_label, S_IRUGO, show_current_label, NULL, 1); + +static SENSOR_DEVICE_ATTR(curr601_label, S_IRUGO, show_current_label, NULL, 2); +static SENSOR_DEVICE_ATTR(curr602_label, S_IRUGO, show_current_label, NULL, 3); + +static SENSOR_DEVICE_ATTR(curr701_label, S_IRUGO, show_current_label, NULL, 4); +static SENSOR_DEVICE_ATTR(curr702_label, S_IRUGO, show_current_label, NULL, 5); + + +static struct attribute *smf_curr_attrs[] = { + &sensor_dev_attr_curr21_input.dev_attr.attr, + &sensor_dev_attr_curr22_input.dev_attr.attr, + + &sensor_dev_attr_curr601_input.dev_attr.attr, + &sensor_dev_attr_curr602_input.dev_attr.attr, + + &sensor_dev_attr_curr701_input.dev_attr.attr, + &sensor_dev_attr_curr702_input.dev_attr.attr, + + &sensor_dev_attr_curr21_label.dev_attr.attr, + &sensor_dev_attr_curr22_label.dev_attr.attr, + + &sensor_dev_attr_curr601_label.dev_attr.attr, + &sensor_dev_attr_curr602_label.dev_attr.attr, + + &sensor_dev_attr_curr701_label.dev_attr.attr, + &sensor_dev_attr_curr702_label.dev_attr.attr, + + NULL +}; + + +static const struct attribute_group smf_curr_group = { + .attrs = smf_curr_attrs, + .is_visible = smf_curr_is_visible, +}; + + +/* CPU_TEMP ATTR */ +static ssize_t +show_temp_label(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct smf_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr(attr)->index; + return sprintf(buf, "%s\n", data->temp_label[nr]); +} + + +static ssize_t show_tcpu(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret; + int temp; + + if (index < TEMP13_INPUT) /* Temp sensors */ + ret = smf_read_reg16(data, TEMP_SENSOR_1 + index * 2); + else if(index < TEMP601_INPUT) + ret = smf_read_reg16(data, PSU_1_TEMPERATURE); + else + ret = smf_read_reg16(data, PSU_2_TEMPERATURE); + + if (ret < 0) + return ret; + + if (ret > 65500) + ret = 0; + + if (ret & 0x8000) + ret = - (ret & 0x7fff); + + temp = ret*100; + + return sprintf(buf, "%d\n", temp); +} + + +static ssize_t show_temp_crit(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret; + int temp; + + ret = smf_read_reg16(data, TEMP_SENSOR_1_HW_LIMIT + index * 2); + if (ret < 0) + return ret; + + if (ret == 65535) + ret = 0; + + if (ret & 0x8000) + ret = - (ret & 0x7fff); + + temp = ret*100; + + return sprintf(buf, "%d\n", temp); +} + + +/*static ssize_t show_temp_alarm(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret; + int temp; + + ret = smf_read_reg16(data, TEMP_SENSOR_1_STATUS + index * 2); + + if (ret < 0) + return ret; + + temp = ret; + + return sprintf(buf, "%d\n", temp); +}*/ + + +static umode_t smf_tcpu_is_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct smf_data *data = dev_get_drvdata(dev); + + if (data->tcpu_mask & (1 << (n % TCPU_MAX))) + return a->mode; + + return 0; +} + + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_tcpu, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_tcpu, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_tcpu, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_tcpu, NULL, 3); +static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_tcpu, NULL, 4); +static SENSOR_DEVICE_ATTR(temp6_input, S_IRUGO, show_tcpu, NULL, 5); +static SENSOR_DEVICE_ATTR(temp7_input, S_IRUGO, show_tcpu, NULL, 6); +static SENSOR_DEVICE_ATTR(temp8_input, S_IRUGO, show_tcpu, NULL, 7); +static SENSOR_DEVICE_ATTR(temp9_input, S_IRUGO, show_tcpu, NULL, 8); +static SENSOR_DEVICE_ATTR(temp10_input, S_IRUGO, show_tcpu, NULL, 9); +static SENSOR_DEVICE_ATTR(temp11_input, S_IRUGO, show_tcpu, NULL, 10); +static SENSOR_DEVICE_ATTR(temp12_input, S_IRUGO, show_tcpu, NULL, 11); +static SENSOR_DEVICE_ATTR(temp13_input, S_IRUGO, show_tcpu, NULL, 12); + +/* PSU1 Fan Temp */ +static SENSOR_DEVICE_ATTR(temp14_input, S_IRUGO, show_tcpu, NULL, 13); + +/* PSU2 Fan Temp */ +static SENSOR_DEVICE_ATTR(temp15_input, S_IRUGO, show_tcpu, NULL, 14); + +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL, 0); +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_temp_label, NULL, 1); +static SENSOR_DEVICE_ATTR(temp3_label, S_IRUGO, show_temp_label, NULL, 2); +static SENSOR_DEVICE_ATTR(temp4_label, S_IRUGO, show_temp_label, NULL, 3); +static SENSOR_DEVICE_ATTR(temp5_label, S_IRUGO, show_temp_label, NULL, 4); +static SENSOR_DEVICE_ATTR(temp6_label, S_IRUGO, show_temp_label, NULL, 5); +static SENSOR_DEVICE_ATTR(temp7_label, S_IRUGO, show_temp_label, NULL, 6); +static SENSOR_DEVICE_ATTR(temp8_label, S_IRUGO, show_temp_label, NULL, 7); +static SENSOR_DEVICE_ATTR(temp9_label, S_IRUGO, show_temp_label, NULL, 8); +static SENSOR_DEVICE_ATTR(temp10_label, S_IRUGO, show_temp_label, NULL, 9); +static SENSOR_DEVICE_ATTR(temp11_label, S_IRUGO, show_temp_label, NULL, 10); +static SENSOR_DEVICE_ATTR(temp12_label, S_IRUGO, show_temp_label, NULL, 11); +static SENSOR_DEVICE_ATTR(temp13_label, S_IRUGO, show_temp_label, NULL, 12); + +static SENSOR_DEVICE_ATTR(temp14_label, S_IRUGO, show_temp_label, NULL, 14); +static SENSOR_DEVICE_ATTR(temp15_label, S_IRUGO, show_temp_label, NULL, 15); + + +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 1); +static SENSOR_DEVICE_ATTR(temp2_crit, S_IRUGO, show_temp_crit, NULL, 5); +static SENSOR_DEVICE_ATTR(temp3_crit, S_IRUGO, show_temp_crit, NULL, 9); +static SENSOR_DEVICE_ATTR(temp4_crit, S_IRUGO, show_temp_crit, NULL, 13); +static SENSOR_DEVICE_ATTR(temp5_crit, S_IRUGO, show_temp_crit, NULL, 17); +static SENSOR_DEVICE_ATTR(temp6_crit, S_IRUGO, show_temp_crit, NULL, 21); +static SENSOR_DEVICE_ATTR(temp7_crit, S_IRUGO, show_temp_crit, NULL, 25); +static SENSOR_DEVICE_ATTR(temp8_crit, S_IRUGO, show_temp_crit, NULL, 29); +static SENSOR_DEVICE_ATTR(temp9_crit, S_IRUGO, show_temp_crit, NULL, 33); +static SENSOR_DEVICE_ATTR(temp10_crit, S_IRUGO, show_temp_crit, NULL, 37); +static SENSOR_DEVICE_ATTR(temp11_crit, S_IRUGO, show_temp_crit, NULL, 41); +static SENSOR_DEVICE_ATTR(temp12_crit, S_IRUGO, show_temp_crit, NULL, 45); +static SENSOR_DEVICE_ATTR(temp13_crit, S_IRUGO, show_temp_crit, NULL, 49); + +static SENSOR_DEVICE_ATTR(temp14_crit, S_IRUGO, show_temp_crit, NULL, 11); +static SENSOR_DEVICE_ATTR(temp15_crit, S_IRUGO, show_temp_crit, NULL, 11); + + +static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_crit, NULL, 2); +static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO, show_temp_crit, NULL, 6); +static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO, show_temp_crit, NULL, 10); +static SENSOR_DEVICE_ATTR(temp4_max, S_IRUGO, show_temp_crit, NULL, 14); +static SENSOR_DEVICE_ATTR(temp5_max, S_IRUGO, show_temp_crit, NULL, 18); +static SENSOR_DEVICE_ATTR(temp6_max, S_IRUGO, show_temp_crit, NULL, 22); +static SENSOR_DEVICE_ATTR(temp7_max, S_IRUGO, show_temp_crit, NULL, 26); +static SENSOR_DEVICE_ATTR(temp8_max, S_IRUGO, show_temp_crit, NULL, 30); +static SENSOR_DEVICE_ATTR(temp9_max, S_IRUGO, show_temp_crit, NULL, 34); +static SENSOR_DEVICE_ATTR(temp10_max, S_IRUGO, show_temp_crit, NULL, 38); +static SENSOR_DEVICE_ATTR(temp11_max, S_IRUGO, show_temp_crit, NULL, 42); +static SENSOR_DEVICE_ATTR(temp12_max, S_IRUGO, show_temp_crit, NULL, 46); +static SENSOR_DEVICE_ATTR(temp13_max, S_IRUGO, show_temp_crit, NULL, 50); + +static SENSOR_DEVICE_ATTR(temp14_max, S_IRUGO, show_temp_crit, NULL, 46); +static SENSOR_DEVICE_ATTR(temp15_max, S_IRUGO, show_temp_crit, NULL, 50); + + +static struct attribute *smf_tcpu_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp5_input.dev_attr.attr, + &sensor_dev_attr_temp6_input.dev_attr.attr, + &sensor_dev_attr_temp7_input.dev_attr.attr, + &sensor_dev_attr_temp8_input.dev_attr.attr, + &sensor_dev_attr_temp9_input.dev_attr.attr, + &sensor_dev_attr_temp10_input.dev_attr.attr, + &sensor_dev_attr_temp11_input.dev_attr.attr, + &sensor_dev_attr_temp12_input.dev_attr.attr, + &sensor_dev_attr_temp13_input.dev_attr.attr, + &sensor_dev_attr_temp14_input.dev_attr.attr, + &sensor_dev_attr_temp15_input.dev_attr.attr, + + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp2_label.dev_attr.attr, + &sensor_dev_attr_temp3_label.dev_attr.attr, + &sensor_dev_attr_temp4_label.dev_attr.attr, + &sensor_dev_attr_temp5_label.dev_attr.attr, + &sensor_dev_attr_temp6_label.dev_attr.attr, + &sensor_dev_attr_temp7_label.dev_attr.attr, + &sensor_dev_attr_temp8_label.dev_attr.attr, + &sensor_dev_attr_temp9_label.dev_attr.attr, + &sensor_dev_attr_temp10_label.dev_attr.attr, + &sensor_dev_attr_temp11_label.dev_attr.attr, + &sensor_dev_attr_temp12_label.dev_attr.attr, + &sensor_dev_attr_temp13_label.dev_attr.attr, + &sensor_dev_attr_temp14_label.dev_attr.attr, + &sensor_dev_attr_temp15_label.dev_attr.attr, + + &sensor_dev_attr_temp1_crit.dev_attr.attr, + &sensor_dev_attr_temp2_crit.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, + &sensor_dev_attr_temp4_crit.dev_attr.attr, + &sensor_dev_attr_temp5_crit.dev_attr.attr, + &sensor_dev_attr_temp6_crit.dev_attr.attr, + &sensor_dev_attr_temp7_crit.dev_attr.attr, + &sensor_dev_attr_temp8_crit.dev_attr.attr, + &sensor_dev_attr_temp9_crit.dev_attr.attr, + &sensor_dev_attr_temp10_crit.dev_attr.attr, + &sensor_dev_attr_temp11_crit.dev_attr.attr, + &sensor_dev_attr_temp12_crit.dev_attr.attr, + &sensor_dev_attr_temp13_crit.dev_attr.attr, + &sensor_dev_attr_temp14_crit.dev_attr.attr, + &sensor_dev_attr_temp15_crit.dev_attr.attr, + + &sensor_dev_attr_temp1_max.dev_attr.attr, + &sensor_dev_attr_temp2_max.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp4_max.dev_attr.attr, + &sensor_dev_attr_temp5_max.dev_attr.attr, + &sensor_dev_attr_temp6_max.dev_attr.attr, + &sensor_dev_attr_temp7_max.dev_attr.attr, + &sensor_dev_attr_temp8_max.dev_attr.attr, + &sensor_dev_attr_temp9_max.dev_attr.attr, + &sensor_dev_attr_temp10_max.dev_attr.attr, + &sensor_dev_attr_temp11_max.dev_attr.attr, + &sensor_dev_attr_temp12_max.dev_attr.attr, + &sensor_dev_attr_temp13_max.dev_attr.attr, + &sensor_dev_attr_temp14_max.dev_attr.attr, + &sensor_dev_attr_temp15_max.dev_attr.attr, + + NULL +}; + + +static const struct attribute_group smf_tcpu_group = { + .attrs = smf_tcpu_attrs, + .is_visible = smf_tcpu_is_visible, +}; + + +/* PSU ATTR */ +static ssize_t +show_psu_label(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct smf_data *data = dev_get_drvdata(dev); + int nr = to_sensor_dev_attr(attr)->index; + return sprintf(buf, "%s\n", data->psu_label[nr]); +} + + +static ssize_t show_psu(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + int index = to_sensor_dev_attr(devattr)->index; + struct smf_data *data = dev_get_drvdata(dev); + int ret=0, export_hex=0; + int psu_status=0, pow; + + switch (index) { + + case 0: + pow = smf_read_reg16(data, PSU_1_MAX_POWER); + /* TODO Fix */ + if (data->kind == s6100smf) + ret = 1000000 * 1100; + else + ret = 1000000 * 750; + break; + case 1: + ret = smf_read_reg(data, PSU_1_STATUS); + export_hex=1; + break; + case 2: + ret = 100000 * smf_read_reg16(data, PSU_1_INPUT_POWER); + break; + case 3: + ret = 100000 * smf_read_reg16(data, PSU_1_OUTPUT_POWER); + break; + case 4: + psu_status = smf_read_reg(data, PSU_1_STATUS); + if (psu_status &(1)) + ret=1; + break; + case 5: + pow = smf_read_reg16(data, PSU_2_MAX_POWER); + ret = 1000000 * pow; + /* TODO Fix */ + if (data->kind == s6100smf) + ret = 1000000 * 1100; + else + ret = 1000000 * 750; + break; + case 6: + ret = smf_read_reg(data, PSU_2_STATUS); + export_hex=1; + break; + case 7: + ret = 100000 * smf_read_reg16(data, PSU_2_INPUT_POWER); + break; + case 8: + ret = 100000 * smf_read_reg16(data, PSU_2_OUTPUT_POWER); + break; + case 9: + psu_status = smf_read_reg(data, PSU_2_STATUS); + if (psu_status &(1)) + ret=1; + break; + case 10: + pow = smf_read_reg16(data, CURRENT_TOTAL_POWER); + ret = pow/10; + break; + default: + return ret; + } + + if (ret < 0) + return ret; + + pow = ret; + + if(export_hex) + return sprintf(buf, "%x\n", pow); + else + return sprintf(buf, "%u\n", pow); +} + + +static umode_t smf_psu_is_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct smf_data *data = dev_get_drvdata(dev); + + if (data->psu_mask & (1 << (n % PSU_MAX))) + return a->mode; + return 0; +} + +/* PSU */ +static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, show_psu, NULL, 2); +static SENSOR_DEVICE_ATTR(power2_input, S_IRUGO, show_psu, NULL, 3); +static SENSOR_DEVICE_ATTR(power3_input, S_IRUGO, show_psu, NULL, 7); +static SENSOR_DEVICE_ATTR(power4_input, S_IRUGO, show_psu, NULL, 8); + +static SENSOR_DEVICE_ATTR(power1_label, S_IRUGO, show_psu_label, NULL, 0); +static SENSOR_DEVICE_ATTR(power2_label, S_IRUGO, show_psu_label, NULL, 1); +static SENSOR_DEVICE_ATTR(power3_label, S_IRUGO, show_psu_label, NULL, 2); +static SENSOR_DEVICE_ATTR(power4_label, S_IRUGO, show_psu_label, NULL, 3); + +static SENSOR_DEVICE_ATTR(power1_max, S_IRUGO, show_psu, NULL, 0); +static SENSOR_DEVICE_ATTR(power2_max, S_IRUGO, show_psu, NULL, 0); +static SENSOR_DEVICE_ATTR(power3_max, S_IRUGO, show_psu, NULL, 5); +static SENSOR_DEVICE_ATTR(power4_max, S_IRUGO, show_psu, NULL, 5); + + +/* PSU2 */ +//static SENSOR_DEVICE_ATTR(power602_alarm, S_IRUGO, show_psu, NULL, 4); +//static SENSOR_DEVICE_ATTR(power702_alarm, S_IRUGO, show_psu, NULL, 9); + + + +static struct attribute *smf_psu_attrs[] = { + + &sensor_dev_attr_power1_input.dev_attr.attr, + &sensor_dev_attr_power2_input.dev_attr.attr, + &sensor_dev_attr_power3_input.dev_attr.attr, + &sensor_dev_attr_power4_input.dev_attr.attr, + + &sensor_dev_attr_power1_label.dev_attr.attr, + &sensor_dev_attr_power2_label.dev_attr.attr, + &sensor_dev_attr_power3_label.dev_attr.attr, + &sensor_dev_attr_power4_label.dev_attr.attr, + + &sensor_dev_attr_power1_max.dev_attr.attr, + &sensor_dev_attr_power2_max.dev_attr.attr, + &sensor_dev_attr_power3_max.dev_attr.attr, + &sensor_dev_attr_power4_max.dev_attr.attr, + + NULL +}; + + +static const struct attribute_group smf_psu_group = { + .attrs = smf_psu_attrs, + .is_visible = smf_psu_is_visible, +}; + + +static const struct attribute_group smf_fanin_group = { + .attrs = smf_fanin_attrs, + .is_visible = smf_fanin_is_visible, +}; + + +static SENSOR_DEVICE_ATTR(fan_tray_presence, S_IRUGO, show_fan, NULL, 12); +static SENSOR_DEVICE_ATTR(fan1_airflow, S_IRUGO, show_fan_airflow, NULL, 0); +static SENSOR_DEVICE_ATTR(fan3_airflow, S_IRUGO, show_fan_airflow, NULL, 1); +static SENSOR_DEVICE_ATTR(fan5_airflow, S_IRUGO, show_fan_airflow, NULL, 2); +static SENSOR_DEVICE_ATTR(fan7_airflow, S_IRUGO, show_fan_airflow, NULL, 3); +static SENSOR_DEVICE_ATTR(fan9_airflow, S_IRUGO, show_fan_airflow, NULL, 4); +static SENSOR_DEVICE_ATTR(fan11_airflow, S_IRUGO, show_psu_fan, NULL, 0); +static SENSOR_DEVICE_ATTR(fan12_airflow, S_IRUGO, show_psu_fan, NULL, 3); +/* IOM status */ +static SENSOR_DEVICE_ATTR(iom_status, S_IRUGO, show_voltage, NULL, 44); +static SENSOR_DEVICE_ATTR(iom_presence, S_IRUGO, show_voltage, NULL, 45); + +static SENSOR_DEVICE_ATTR(psu1_presence, S_IRUGO, show_psu, NULL, 1); +static SENSOR_DEVICE_ATTR(psu2_presence, S_IRUGO, show_psu, NULL, 6); +static SENSOR_DEVICE_ATTR(current_total_power, S_IRUGO, show_psu, NULL, 10); + +static struct attribute *smf_dell_attrs[] = { + &sensor_dev_attr_fan_tray_presence.dev_attr.attr, + &sensor_dev_attr_fan1_airflow.dev_attr.attr, + &sensor_dev_attr_fan3_airflow.dev_attr.attr, + &sensor_dev_attr_fan5_airflow.dev_attr.attr, + &sensor_dev_attr_fan7_airflow.dev_attr.attr, + &sensor_dev_attr_fan9_airflow.dev_attr.attr, + &sensor_dev_attr_fan11_airflow.dev_attr.attr, + &sensor_dev_attr_fan12_airflow.dev_attr.attr, + &sensor_dev_attr_iom_status.dev_attr.attr, + &sensor_dev_attr_iom_presence.dev_attr.attr, + &sensor_dev_attr_psu1_presence.dev_attr.attr, + &sensor_dev_attr_psu2_presence.dev_attr.attr, + &sensor_dev_attr_current_total_power.dev_attr.attr, + NULL +}; + +static const struct attribute_group smf_dell_group = { + .attrs = smf_dell_attrs, + .is_visible = smf_dell_is_visible, +}; + + +static const struct attribute_group *smf_groups[] = { + &smf_psu_group, + &smf_fanin_group, + &smf_vsen_group, + &smf_curr_group, + &smf_tcpu_group, + &smf_dell_group, + NULL +}; + + + +static int smf_probe(struct platform_device *pdev) +{ + struct smf_data *data; + struct device *dev = &pdev->dev; + struct smf_sio_data *sio_data = dev_get_platdata(dev); + struct resource *res; + int err = 0; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!request_region(res->start, IOREGION_LENGTH, + smf_devices[sio_data->kind].name)) { + err = -EBUSY; + dev_err(dev, "Failed to request region 0x%lx-0x%lx\n", + (unsigned long)res->start, + (unsigned long)res->start + IOREGION_LENGTH - 1); + return err; + } + + data = devm_kzalloc(dev, sizeof(struct smf_data), GFP_KERNEL); + /* TODO Use probe address value */ + data->addr = SMF_PROBE_ADDR; + data->kind = sio_data->kind; + + if (!data) + return -ENOMEM; + + mutex_init(&data->lock); + + /* PSU attributes */ + data->psu_mask = smf_devices[data->kind].psu_mask; + data->psu_label = smf_devices[data->kind].psu_label; + + /* FANIN attributes */ + data->fanin_mask = smf_devices[data->kind].fanin_mask; + data->fan_label = smf_devices[data->kind].fan_label; + + /* VSEN attributes */ + data->vsen_mask = smf_devices[data->kind].vsen_mask; + data->vsen_label = smf_devices[data->kind].vsen_label; + + /* CURR attributes */ + data->curr_mask = smf_devices[data->kind].curr_mask; + data->curr_label = smf_devices[data->kind].curr_label; + + /* CPU_TEMP attributes */ + data->tcpu_mask = smf_devices[data->kind].tcpu_mask; + data->temp_label = smf_devices[data->kind].temp_label; + + data->hwmon_dev = devm_hwmon_device_register_with_groups(dev, + smf_devices[data->kind].name, + data, smf_groups); + + return PTR_ERR_OR_ZERO(data->hwmon_dev); +} + + +static int smf_remove(struct platform_device *pdev) +{ + struct resource *res; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + release_region(res->start, IOREGION_LENGTH); + return 0; +} + + +static struct platform_driver smf_driver = { + .driver = { + .name = "SMF", + }, + .probe = smf_probe, + .remove = smf_remove +}; + +int __init +smf_find(int sioaddr, unsigned short *addr, struct smf_sio_data *sio_data) +{ + + int val; + + if (force_id) + val = force_id; + else + val = inb(sioaddr + SIO_REG_DEVID); + + switch (val) { + case SIO_Z9100_ID: + sio_data->kind = z9100smf; + break; + case SIO_S6100_ID: + sio_data->kind = s6100smf; + break; + + default: + if (val != 0xffff) + pr_debug("unsupported chip ID: 0x%04x\n", val); + return -ENODEV; + } + + /* TODO Use define, should this be 0x200 or 0x210??? */ + *addr = sioaddr; + + pr_info("Found %s chip at %#x\n", smf_devices[sio_data->kind].name, *addr); + sio_data->sioreg = sioaddr; + + return (0); +} + + +/* + * when Super-I/O functions move to a separate file, the Super-I/O + * bus will manage the lifetime of the device and this module will only keep + * track of the smf driver. But since we platform_device_alloc(), we + * must keep track of the device + */ +static struct platform_device *pdev; + +static int __init sensors_smf_init(void) +{ + int err; + unsigned short address; + struct resource res; + struct smf_sio_data sio_data; + + /* + * initialize sio_data->kind and sio_data->sioreg. + * when Super-I/O functions move to a separate file, the Super-I/O + * driver will probe and auto-detect the presence of a + * smf hardware monitor, and call probe() + */ + + if (smf_find(SMF_REG_ADDR, &address, &sio_data)) + return -ENODEV; + + err = platform_driver_register(&smf_driver); + if (err) + goto exit; + + pdev = platform_device_alloc(SIO_DRVNAME, address); + if (!pdev) { + err = -ENOMEM; + pr_err("Device allocation failed\n"); + goto exit_unregister; + } + + err = platform_device_add_data(pdev, &sio_data, + sizeof(struct smf_sio_data)); + if (err) { + pr_err("Platform data allocation failed\n"); + goto exit_device_put; + } + + memset(&res, 0, sizeof(res)); + res.name = SIO_DRVNAME; + res.start = address + IOREGION_OFFSET; + res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1; + res.flags = IORESOURCE_IO; + + err = acpi_check_resource_conflict(&res); + if (err) + goto exit_device_put; + + err = platform_device_add_resources(pdev, &res, 1); + if (err) { + pr_err("Device resource addition failed (%d)\n", err); + goto exit_device_put; + } + + /* platform_device_add calls probe() */ + err = platform_device_add(pdev); + if (err) { + pr_err("Device addition failed (%d)\n", err); + goto exit_device_put; + } + + return 0; + +exit_device_put: + platform_device_put(pdev); +exit_unregister: + platform_driver_unregister(&smf_driver); +exit: + return err; +} + + +static void __exit sensors_smf_exit(void) +{ + platform_device_unregister(pdev); + platform_driver_unregister(&smf_driver); + + /*Remove sysfs dell_kobj*/ + kobject_put(dell_kobj); +} + + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SMF driver"); +MODULE_PARM_DESC(force_id, "Override the detected device ID"); +MODULE_AUTHOR("Per Fremrot "); +MODULE_AUTHOR("Paavaanan "); + +module_init(sensors_smf_init); +module_exit(sensors_smf_exit); diff --git a/platform/broadcom/sonic-platform-modules-dell/common/fstrim.service b/platform/broadcom/sonic-platform-modules-dell/common/fstrim.service new file mode 100644 index 000000000000..cf740d3af34d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/common/fstrim.service @@ -0,0 +1,6 @@ +[Unit] +Description=Discard unused blocks + +[Service] +Type=oneshot +ExecStart=/sbin/fstrim -av diff --git a/platform/broadcom/sonic-platform-modules-dell/common/fstrim.timer b/platform/broadcom/sonic-platform-modules-dell/common/fstrim.timer new file mode 100644 index 000000000000..c6142dd94826 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/common/fstrim.timer @@ -0,0 +1,12 @@ +[Unit] +Description=Discard unused blocks once a week +Documentation=man:fstrim + +[Timer] +OnCalendar=weekly +OnBootSec=10min +AccuracySec=1h +Persistent=true + +[Install] +WantedBy=multi-user.target diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/changelog b/platform/broadcom/sonic-platform-modules-dell/debian/changelog new file mode 100644 index 000000000000..90fed6f6d847 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/changelog @@ -0,0 +1,11 @@ +sonic-dell-platform-modules (1.1) unstable; urgency=low + + * Add support for Dell S6100 + + -- Dell Team Wed, 08 Feb 2017 15:57:40 -0800 + +sonic-dell-platform-modules (1.0) unstable; urgency=low + + * Initial release + + -- Dell Team Mon, 6 Feb 2017 10:10:10 -0800 diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/compat b/platform/broadcom/sonic-platform-modules-dell/debian/compat new file mode 100644 index 000000000000..ec635144f600 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/compat @@ -0,0 +1 @@ +9 diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/control b/platform/broadcom/sonic-platform-modules-dell/debian/control new file mode 100644 index 000000000000..557b5b884f93 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/control @@ -0,0 +1,22 @@ +Source: sonic-dell-platform-modules +Section: main +Priority: extra +Maintainer: Dell Team +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: platform-modules-z9264f +Architecture: amd64 +Depends: linux-image-4.9.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: platform-modules-z9100 +Architecture: amd64 +Depends: linux-image-4.9.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + +Package: platform-modules-s6100 +Architecture: amd64 +Depends: linux-image-4.9.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.init b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.init new file mode 100755 index 000000000000..c798b24ef235 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.init @@ -0,0 +1,40 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S6100 board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + /usr/local/bin/iom_power_on.sh + /usr/local/bin/s6100_platform.sh init + + echo "done." + ;; + +stop) + /usr/local/bin/s6100_platform.sh deinit + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/platform-modules-s6100.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.install b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.install new file mode 100644 index 000000000000..f456acb9d812 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.install @@ -0,0 +1,9 @@ +s6100/scripts/io_rd_wr.py usr/local/bin +s6100/scripts/iom_power_*.sh usr/local/bin +s6100/scripts/s6100_platform.sh usr/local/bin +common/dell_i2c_utils.sh usr/local/bin +common/fstrim.timer etc/systemd/system +common/fstrim.service etc/systemd/system +s6100/scripts/platform_sensors.py usr/local/bin +s6100/scripts/sensors usr/bin + diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.postinst b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.postinst new file mode 100644 index 000000000000..aeabe1abd27c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-s6100.postinst @@ -0,0 +1,7 @@ +# postinst script for S6100 + +# Enable fstrim +systemctl enable fstrim.timer +systemctl start fstrim.timer + +#DEBHELPER# diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.init b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.init new file mode 100755 index 000000000000..aefecf1d8158 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.init @@ -0,0 +1,40 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup Z9100 board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + # /usr/local/bin/iom_power_on.sh + /usr/local/bin/z9100_platform.sh init + + echo "done." + ;; + +stop) + /usr/local/bin/z9100_platform.sh deinit + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/platform-modules-z9100.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.install b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.install new file mode 100644 index 000000000000..66d24e98e89c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.install @@ -0,0 +1,8 @@ +z9100/scripts/check_qsfp.sh usr/local/bin +z9100/scripts/z9100_platform.sh usr/local/bin +common/dell_i2c_utils.sh usr/local/bin +common/fstrim.timer etc/systemd/system +common/fstrim.service etc/systemd/system +z9100/scripts/platform_sensors.py usr/local/bin +z9100/scripts/sensors usr/bin +z9100/cfg/z9100-modules.conf etc/modules-load.d diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.postinst b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.postinst new file mode 100644 index 000000000000..b11ae1f274c4 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9100.postinst @@ -0,0 +1,7 @@ +# postinst script for Z9100 + +# Enable fstrim +systemctl enable fstrim.timer +systemctl start fstrim.timer + +#DEBHELPER# diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9264f.init b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9264f.init new file mode 100755 index 000000000000..cc83662e7746 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9264f.init @@ -0,0 +1,40 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup Z9264f board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + # /usr/local/bin/iom_power_on.sh + /usr/local/bin/z9264f_platform.sh init + + echo "done." + ;; + +stop) + /usr/local/bin/z9100_platform.sh deinit + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/platform-modules-z9264f.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9264f.install b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9264f.install new file mode 100644 index 000000000000..7887399e4964 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/platform-modules-z9264f.install @@ -0,0 +1,6 @@ +z9264f/scripts/z9264f_platform.sh usr/local/bin +z9264f/scripts/check_qsfp.sh usr/local/bin +z9264f/scripts/platform_sensors.py usr/local/bin +z9264f/scripts/sensors usr/bin +z9264f/scripts/pcisysfs.py usr/bin +z9264f/cfg/z9264f-modules.conf etc/modules-load.d diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/rules b/platform/broadcom/sonic-platform-modules-dell/debian/rules new file mode 100755 index 000000000000..3386580a80a4 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/debian/rules @@ -0,0 +1,45 @@ +#!/usr/bin/make -f + +export INSTALL_MOD_DIR:=extra + +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MOD_SRC_DIR:= $(shell pwd) +MODULE_DIRS:= s6100 z9100 z9264f +COMMON_DIR := common + +%: + dh $@ + +override_dh_auto_build: + (for mod in $(MODULE_DIRS); do \ + if [ $$mod = "s6100" ]; then \ + cp $(COMMON_DIR)/*.c $(MOD_SRC_DIR)/$${mod}/modules/dell_s6100_lpc.c; \ + elif [ $$mod = "z9100" ]; then \ + cp $(COMMON_DIR)/*.c $(MOD_SRC_DIR)/$${mod}/modules/dell_mailbox.c; \ + fi; \ + echo "making man page alias $$mod -> $$mod APIs";\ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules; \ + done) + +override_dh_auto_install: + (for mod in $(MODULE_DIRS); do \ + dh_installdirs -pplatform-modules-$${mod} \ + $(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + cp $(MOD_SRC_DIR)/$${mod}/modules/*.ko \ + debian/platform-modules-$${mod}/$(KERNEL_SRC)/$(INSTALL_MOD_DIR); \ + done) + +override_dh_usrlocal: + +override_dh_clean: + dh_clean + (for mod in $(MODULE_DIRS); do \ + if [ $$mod = "s6100" ]; then \ + rm -f $(MOD_SRC_DIR)/$${mod}/modules/dell_s6100_lpc.c; \ + elif [ $$mod = "z9100" ]; then \ + rm -f $(MOD_SRC_DIR)/$${mod}/modules/dell_mailbox.c; \ + fi; \ + make -C $(KERNEL_SRC)/build M=$(MOD_SRC_DIR)/$${mod}/modules clean; \ + done) + diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/modules/Makefile b/platform/broadcom/sonic-platform-modules-dell/s6100/modules/Makefile new file mode 100644 index 000000000000..0cdfbf5e67b8 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := dell_s6100_iom_cpld.o dell_s6100_lpc.o + diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/modules/dell_s6100_iom_cpld.c b/platform/broadcom/sonic-platform-modules-dell/s6100/modules/dell_s6100_iom_cpld.c new file mode 100644 index 000000000000..6cc28f707a1f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/modules/dell_s6100_iom_cpld.c @@ -0,0 +1,266 @@ + +#include // included for all kernel modules +#include // included for KERN_INFO +#include // included for __init and __exit macros +#include +#include +#include +#include + + +//iom cpld slave address +#define IOM_CPLD_SLAVE_ADD 0x3e + +//iom cpld ver register +#define IOM_CPLD_SLAVE_VER 0x00 + +//qsfp reset cntrl reg on each iom +#define QSFP_RST_CRTL_REG0 0x10 +#define QSFP_RST_CRTL_REG1 0x11 + +//qsfp lp mode reg on each iom +#define QSFP_LPMODE_REG0 0x12 +#define QSFP_LPMODE_REG1 0x13 + +//qsfp mod presence reg on each iom +#define QSFP_MOD_PRS_REG0 0x16 +#define QSFP_MOD_PRS_REG1 0x17 + + +struct cpld_data { + struct i2c_client *client; + struct mutex update_lock; +}; + + +static void dell_s6100_iom_cpld_add_client(struct i2c_client *client) +{ + struct cpld_data *data = kzalloc(sizeof(struct cpld_data), GFP_KERNEL); + + if (!data) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + data->client = client; + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); +} + +static void dell_s6100_iom_cpld_remove_client(struct i2c_client *client) +{ + struct cpld_data *data = i2c_get_clientdata(client); + kfree(data); + return; +} + +int dell_s6100_iom_cpld_read(struct cpld_data *data,unsigned short cpld_addr, u8 reg) +{ + int ret = -EPERM; + u8 high_reg =0x00; + + mutex_lock(&data->update_lock); + ret = i2c_smbus_write_byte_data(data->client, high_reg,reg); + ret = i2c_smbus_read_byte(data->client); + mutex_unlock(&data->update_lock); + + return ret; +} + +int dell_s6100_iom_cpld_write(struct cpld_data *data,unsigned short cpld_addr, u8 reg, u8 value) +{ + int ret = -EIO; + u16 devdata=0; + u8 high_reg =0x00; + + mutex_lock(&data->update_lock); + devdata = (value << 8) | reg; + i2c_smbus_write_word_data(data->client,high_reg,devdata); + mutex_unlock(&data->update_lock); + + return ret; +} +static ssize_t get_cpldver(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u8 devdata=0; + struct cpld_data *data = dev_get_drvdata(dev); + + ret = dell_s6100_iom_cpld_read(data,IOM_CPLD_SLAVE_ADD,IOM_CPLD_SLAVE_VER); + if(ret < 0) + return sprintf(buf, "read error"); + devdata = (u8)ret & 0xff; + return sprintf(buf,"IOM CPLD Version:0x%02x\n",devdata); +} + +static ssize_t get_modprs(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u16 devdata=0; + struct cpld_data *data = dev_get_drvdata(dev); + + ret = dell_s6100_iom_cpld_read(data,IOM_CPLD_SLAVE_ADD,QSFP_MOD_PRS_REG0); + if(ret < 0) + return sprintf(buf, "read error"); + devdata = (u16)ret & 0xff; + + ret = dell_s6100_iom_cpld_read(data,IOM_CPLD_SLAVE_ADD,QSFP_MOD_PRS_REG1); + if(ret < 0) + return sprintf(buf, "read error"); + devdata |= (u16)(ret & 0xff) << 8; + + return sprintf(buf,"0x%04x\n",devdata); +} + +static ssize_t get_lpmode(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u16 devdata=0; + struct cpld_data *data = dev_get_drvdata(dev); + + ret = dell_s6100_iom_cpld_read(data,IOM_CPLD_SLAVE_ADD,QSFP_LPMODE_REG0); + if(ret < 0) + return sprintf(buf, "read error"); + devdata = (u16)ret & 0xff; + + ret = dell_s6100_iom_cpld_read(data,IOM_CPLD_SLAVE_ADD,QSFP_LPMODE_REG1); + if(ret < 0) + return sprintf(buf, "read error"); + devdata |= (u16)(ret & 0xff) << 8; + + return sprintf(buf,"0x%04x\n",devdata); +} + +static ssize_t get_reset(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u16 devdata=0; + struct cpld_data *data = dev_get_drvdata(dev); + + ret = dell_s6100_iom_cpld_read(data,IOM_CPLD_SLAVE_ADD,QSFP_RST_CRTL_REG0); + if(ret < 0) + return sprintf(buf, "read error"); + devdata = (u16)ret & 0xff; + + ret = dell_s6100_iom_cpld_read(data,IOM_CPLD_SLAVE_ADD,QSFP_RST_CRTL_REG1); + if(ret < 0) + return sprintf(buf, "read error"); + devdata |= (u16)(ret & 0xff) << 8; + + return sprintf(buf,"0x%04x\n",devdata); +} + +static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long devdata; + int err; + struct cpld_data *data = dev_get_drvdata(dev); + + err = kstrtoul(buf, 16, &devdata); + if (err) + return err; + + dell_s6100_iom_cpld_write(data,IOM_CPLD_SLAVE_ADD,QSFP_LPMODE_REG0,(u8)(devdata & 0xff)); + dell_s6100_iom_cpld_write(data,IOM_CPLD_SLAVE_ADD,QSFP_LPMODE_REG1,(u8)((devdata >> 8) & 0xff)); + + return count; +} + +static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long devdata; + int err; + struct cpld_data *data = dev_get_drvdata(dev); + + err = kstrtoul(buf, 16, &devdata); + if (err) + return err; + + dell_s6100_iom_cpld_write(data,IOM_CPLD_SLAVE_ADD,QSFP_RST_CRTL_REG0,(u8)(devdata & 0xff)); + dell_s6100_iom_cpld_write(data,IOM_CPLD_SLAVE_ADD,QSFP_RST_CRTL_REG1,(u8)((devdata >> 8) & 0xff)); + + return count; +} + +static DEVICE_ATTR(iom_cpld_vers,S_IRUGO,get_cpldver, NULL); +static DEVICE_ATTR(qsfp_modprs, S_IRUGO,get_modprs, NULL); +static DEVICE_ATTR(qsfp_lpmode, S_IRUGO | S_IWUSR,get_lpmode,set_lpmode); +static DEVICE_ATTR(qsfp_reset, S_IRUGO | S_IWUSR,get_reset, set_reset); + +static struct attribute *i2c_cpld_attrs[] = { + &dev_attr_qsfp_lpmode.attr, + &dev_attr_qsfp_reset.attr, + &dev_attr_qsfp_modprs.attr, + &dev_attr_iom_cpld_vers.attr, + NULL, +}; + +static struct attribute_group i2c_cpld_attr_grp = { + .attrs = i2c_cpld_attrs, +}; + +static int dell_s6100_iom_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&client->dev, "i2c_check_functionality failed (0x%x)\n", client->addr); + status = -EIO; + goto exit; + } + + dev_info(&client->dev, "chip found\n"); + dell_s6100_iom_cpld_add_client(client); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &i2c_cpld_attr_grp); + if (status) { + printk(KERN_INFO "Cannot create sysfs\n"); + } + return 0; + +exit: + return status; +} + +static int dell_s6100_iom_cpld_remove(struct i2c_client *client) +{ + dell_s6100_iom_cpld_remove_client(client); + return 0; +} + + +static const struct i2c_device_id dell_s6100_iom_cpld_id[] = { + { "dell_s6100_iom_cpld", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, dell_s6100_iom_cpld_id); + +static struct i2c_driver dell_s6100_iom_cpld_driver = { + .driver = { + .name = "dell_s6100_iom_cpld", + }, + .probe = dell_s6100_iom_cpld_probe, + .remove = dell_s6100_iom_cpld_remove, + .id_table = dell_s6100_iom_cpld_id, +}; + + + +static int __init dell_s6100_iom_cpld_init(void) +{ + return i2c_add_driver(&dell_s6100_iom_cpld_driver); +} + +static void __exit dell_s6100_iom_cpld_exit(void) +{ + i2c_del_driver(&dell_s6100_iom_cpld_driver); +} + +MODULE_AUTHOR("Srideep Devireddy "); +MODULE_DESCRIPTION("dell_s6100_iom_cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(dell_s6100_iom_cpld_init); +module_exit(dell_s6100_iom_cpld_exit); diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/README b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/README new file mode 100644 index 000000000000..b141bb05e2e4 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/README @@ -0,0 +1,146 @@ +Dell S6100 64x40G support +------------------------ + +summary:- +S6100 has 64 x 40G port capacity +S6100 supports 4 IO Modules which are pluggable. Below section covers how to power on IO modules +and initialize the device drivers and configure necessary mux to send traffic. + + +Necessary drivers and scripts to package + +1) Users are expected to build necessary drivers for kernel and package to acess it on the target + + a) Mgmt phy driver + This supports BCM 54616 phy driver ( enable CONFIG_IGB in kernel config) + b) driver-support-sff-8436-eeprom.patch + c) driver-support-sff-8436-eeprom-update.patch + This driver supports QSFP EEPROM + d) dell_s6100_iom_cpld.ko + This driver provides support for cpld on 4 x 40Gig-IOM modules + e) i2c_mux_pca954x.ko + This driver provides support for i2c mux/switch (pca954x) + f) dell_s6100_lpc.ko + This driver porivide support for reading all the platform info from SMF. + + +2) Users are also expected to package below scripts for platform initialization and i2c tree creation + + a) iom_power.sh + This script is used to power on IO modules on S6100 + b) io_rd_wr.py +This script is generic LPC/io read/write utility (can also access system cpld) + +steps to platform initialization (Tested with 3.16) + +1) After power up of S6100 + + a) power up the io modules by executing (./iom_power.sh) + b) insert i2c_mux_pca954x.ko,dell_s6100_iom_cpld.ko,dell_s6100_lpc.ko + + Above 2 steps can be called by including them in below 2 step + +2) Build i2c device tree/device initialization by calling below script + + ./s6100_platform_init.sh + +3) IOM cpld devices are created under "/sys/bus/i2c/drivers/dell_s6100_iom_cpld/" + QSFP handles via sysfs i2c bus #( 15,16,17,18-003e) + iom_cpld_vers -- Displays CPLD version(RO) + qsfp_lpmode -- lpmode settings(RW) + qsfp_modprs -- modules presence (RO) + qsfp_reset -- reset settings (RW) + + ls /sys/bus/i2c/drivers/dell_s6100_iom_cpld/15-003e/ + driver/ iom_cpld_vers modalias name power/ qsfp_lpmode qsfp_modprs qsfp_reset subsystem/ uevent + +4) step 2 script also builds/attach sfp device tress in sysfs + + Example for reading EEPROM data + + cat /sys/bus/i2c/devices/19-0050/eeprom | hexdump -C + 00000000 0d 00 00 0f 00 00 00 00 00 00 00 00 00 00 00 00 |................| + 00000010 00 00 00 00 00 00 18 1b 00 00 82 20 00 00 00 00 |........... ....| + 00000020 00 00 00 00 00 00 00 00 00 00 16 4d 16 4d 16 4d |...........M.M.M| + 00000030 16 4d 34 bf 44 bf 54 bf 64 bf 00 00 00 00 00 00 |.M4.D.T.d.......| + 00000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| + * + 00000070 00 00 00 00 00 00 00 ff ff ff ff ff ff ff ff 00 |................| + 00000080 0d 00 0c 04 00 00 00 40 40 02 d5 05 69 00 00 32 |.......@@...i..2| + 00000090 00 00 00 00 46 49 4e 49 53 41 52 20 43 4f 52 50 |....FINISAR CORP| + 000000a0 20 20 20 20 07 00 90 65 46 54 4c 34 31 30 51 45 | ...eFTL410QE| + 000000b0 31 43 20 20 20 20 20 20 41 33 42 68 07 d0 46 70 |1C A3Bh..Fp| + 000000c0 00 01 04 d0 4d 4c 54 30 30 51 33 20 20 20 20 20 |....MLT00Q3 | + 000000d0 20 20 20 20 31 32 30 31 31 35 20 20 08 00 00 38 | 120115 ...8| + 000000e0 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 | | + 000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| + * + 00000200 4b 00 fb 00 46 00 00 00 00 00 00 00 00 00 00 00 |K...F...........| + 00000210 94 70 6e f0 86 c4 7b 0c 00 00 00 00 00 00 00 00 |.pn...{.........| + 00000220 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| + * + 00000260 00 00 11 11 00 00 00 00 00 00 00 00 00 00 22 22 |..............""| + 00000270 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| + 00000280 + +5)SMF driver details/Readme are as below + + S6100 SMF + --------- + + S6100 has one SMF soc on CPU board. This is via LPC interface, provide access to all the below functionality + + a) Read sensors details on the system + b) Read PSU details on the system + c) Read fans/Fan tray details on the system + d) Read/Write to system led + + dell_s6100_lpc create entry for all the above necessary platform components as attributes in below path. + + /sys/devices/platform/dell_s6100_lpc/ + + + LED:- + ---- + + Get /set operations on sys_led + + Get operation + cat /sys/devices/platform/dell_s6100_lpc/sys_led + 0x80 + + Set operation + echo 83 > sys/devices/platform/dell_s6100_lpc/sys_led + + Sensors:- + -------- + + Max no of sensors on the system ( 11 sensors are available on fully loaded system) + + cat /sys/devices/platform/dell_s6100_lpc/max_num_temp_sensors + b + + cat /sys/devices/platform/dell_s6100_lpc/temp_sensor_1 ( temp_sensor_1 <85>.temp_sensor_11) + + Fan tray speed:- + -------------- + + /sys/devices/platform/dell_s6100_lpc/fan_tray_1_speed (fan_tray_1_speed - fan_tray_4_speed) + 13700 + + cat /sys/devices/platform/dell_s6100_lpc/psu1_max_pwr + 110 + cat /sys/devices/platform/dell_s6100_lpc/psu2_max_pwr + 110 + + cat /sys/devices/platform/dell_s6100_lpc/psu_total_pwr + 232 + + + + + + + + + diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/io_rd_wr.py b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/io_rd_wr.py new file mode 100755 index 000000000000..dc9dd09807c2 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/io_rd_wr.py @@ -0,0 +1,93 @@ +#!/usr/bin/python +#Script to read/write the io based registers + +import sys +import os +import getopt +import struct + +io_resource='/dev/port' + +def usage(): + ''' This is the Usage Method ''' + + print 'Utility for IO read/write' + print '\t\t io_rd_wr.py --get --offset ' + print '\t\t io_rd_wr.py --set --val --offset ' + sys.exit(1) + +def io_reg_read(io_resource,offset): + fd=os.open(io_resource, os.O_RDONLY) + if(fd<0): + print 'file open failed %s"%io_resource' + return + if(os.lseek(fd, offset, os.SEEK_SET) != offset): + print 'lseek failed on %s'%io_resource + return + buf=os.read(fd,1) + reg_val1=ord(buf) + print 'reg value %x'%reg_val1 + os.close(fd) + +def io_reg_write(io_resource,offset,val): + fd=os.open(io_resource,os.O_RDWR) + if(fd<0): + print 'file open failed %s"%io_resource' + return + if(os.lseek(fd, offset, os.SEEK_SET) != offset): + print 'lseek failed on %s'%io_resource + return + ret=os.write(fd,struct.pack('B',val)) + if(ret != 1): + print 'write failed %d'%ret + return + os.close(fd) + +def main(argv): + + ''' The main function will read the user input from the + command line argument and process the request ''' + + opts = '' + val = '' + choice = '' + resouce = '' + offset = '' + + try: + opts, args = getopt.getopt(argv, "hgs:" , \ + ["val=","offset=","help", "get", "set"]) + + except getopt.GetoptError: + usage() + + for opt,arg in opts: + + if opt in ('-h','--help'): + choice = 'help' + + elif opt in ('-g', '--get'): + choice = 'get' + + elif opt in ('-s', '--set'): + choice = 'set' + + elif opt == '--offset': + offset = int(arg,16) + + elif opt == '--val': + val = int(arg,16) + + if choice == 'get' and offset != '': + io_reg_read(io_resource,offset) + + elif choice == 'set' and offset != '' and val != '': + io_reg_write(io_resource,offset,val) + + else: + usage() + +#Calling the main method +if __name__ == "__main__": + main(sys.argv[1:]) + diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iom_power_off.sh b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iom_power_off.sh new file mode 100755 index 000000000000..a7671cfe589c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iom_power_off.sh @@ -0,0 +1,16 @@ +#!/bin/bash +#This script is used to power off IO modules +# IOM can be controlled via SMF using mailbox registers +# write 0x2 to 0x04D9 to power off IOM 1 +./io_rd_wr.py --set --val 0x04 --offset 0x210 +./io_rd_wr.py --set --val 0xd9 --offset 0x211 +./io_rd_wr.py --set --val 0x2 --offset 0x213 +# write 0x2 to 0x04DA to power off IOM 2 +./io_rd_wr.py --set --val 0xda --offset 0x211 +./io_rd_wr.py --set --val 0x2 --offset 0x213 +# write 0x2 to 0x04DB to power off IOM 3 +./io_rd_wr.py --set --val 0xdb --offset 0x211 +./io_rd_wr.py --set --val 0x2 --offset 0x213 +# write 0x2 to 0x04DC to power off IOM 4 +./io_rd_wr.py --set --val 0xdc --offset 0x211 +./io_rd_wr.py --set --val 0x2 --offset 0x213 diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iom_power_on.sh b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iom_power_on.sh new file mode 100755 index 000000000000..3d31170803e1 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/iom_power_on.sh @@ -0,0 +1,17 @@ +#!/bin/bash +# This script is used to power on IO modules +# IOM can be controlled via SMF using mailbox registers + +# write 0x1 to 0x04D9 to power up IOM 1 +/usr/local/bin/io_rd_wr.py --set --val 0x04 --offset 0x210 +/usr/local/bin/io_rd_wr.py --set --val 0xd9 --offset 0x211 +/usr/local/bin/io_rd_wr.py --set --val 0x1 --offset 0x213 +# write 0x1 to 0x04DA to power up IOM 2 +/usr/local/bin/io_rd_wr.py --set --val 0xda --offset 0x211 +/usr/local/bin/io_rd_wr.py --set --val 0x1 --offset 0x213 +# write 0x1 to 0x04DB to power up IOM 3 +/usr/local/bin/io_rd_wr.py --set --val 0xdb --offset 0x211 +/usr/local/bin/io_rd_wr.py --set --val 0x1 --offset 0x213 +# write 0x1 to 0x04DC to power up IOM 4 +/usr/local/bin/io_rd_wr.py --set --val 0xdc --offset 0x211 +/usr/local/bin/io_rd_wr.py --set --val 0x1 --offset 0x213 diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/platform_sensors.py b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/platform_sensors.py new file mode 100755 index 000000000000..fb59df1ee7f3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/platform_sensors.py @@ -0,0 +1,322 @@ +#!/usr/bin/python + +# On S6100, the Platform Management Controller runs the +# thermal algorithm. It provides a mailbox for the Host +# to query relevant thermals. The dell_mailbox module +# provides the sysfs support for the following objects: +# * onboard temperature sensors +# * FAN trays +# * PSU +# +import os +import sys +import logging + +S6100_MAX_FAN_TRAYS = 4 +S6100_MAX_PSUS = 2 +S6100_MAX_IOMS = 4 + +MAILBOX_DIR = "/sys/devices/platform/SMF.512/hwmon/hwmon1" +iom_status_list = [] + +# Get a mailbox register + + +def get_pmc_register(reg_name): + retval = 'ERR' + mb_reg_file = MAILBOX_DIR+'/'+reg_name + + if (not os.path.isfile(mb_reg_file)): + print mb_reg_file, 'not found !' + return retval + + try: + with open(mb_reg_file, 'r') as fd: + retval = fd.read() + except Exception as error: + logging.error("Unable to open ", mb_reg_file, "file !") + + retval = retval.rstrip('\r\n') + retval = retval.lstrip(" ") + return retval + +logging.basicConfig(level=logging.DEBUG) + +if (os.path.isdir(MAILBOX_DIR)): + print 'dell-s6100-lpc' + print 'Adapter: S6100 Platform Management Controller' +else: + logging.error('S6100 Platform Management Controller module not loaded !') + # sys.exit(0) + +# Print the information for temperature sensors + + +def print_temperature_sensors(): + print("\nOnboard Temperature Sensors:") + print ' CPU: ',\ + int(get_pmc_register('temp1_input'))/1000, 'C' + print ' BCM56960 (PSU side): ',\ + int(get_pmc_register('temp2_input'))/1000, 'C' + print ' System Outlet 1 (switch board): ',\ + int(get_pmc_register('temp3_input'))/1000, 'C' + print ' BCM56960 (IO side): ',\ + int(get_pmc_register('temp4_input'))/1000, 'C' + print ' System Outlet 2 (CPU board): ',\ + int(get_pmc_register('temp9_input'))/1000, 'C' + print ' System Inlet Left (IO side): ',\ + int(get_pmc_register('temp10_input'))/1000, 'C' + print ' System Inlet Right (IO side): ',\ + int(get_pmc_register('temp11_input'))/1000, 'C' + + iom_status = get_pmc_register('iom_presence') + iom_status = int(iom_status, 16) + + iom_presence = get_pmc_register('iom_status') + + if (iom_presence != 'ERR'): + iom_presence = int(iom_presence, 16) + + # IOM presence : 0 => IOM present + # Temperature sensors 5..8 correspond to IOM 1..4 + for iom in range(0, S6100_MAX_IOMS): + if (~iom_presence & (1 << iom)): + iom_sensor_indx = iom + 5 + print ' IOM ' + str(iom + 1) + ':\t\t\t ',\ + int(get_pmc_register('temp'+str(iom_sensor_indx) + + '_input'))/1000, 'C' + + # Save the IOM Status for later use + if (~iom_status & (1 << iom)): + iom_status_list.append('ON') + else: + iom_status_list.append('OFF') + else: + iom_status_list.append('Not present') + print ' IOM ' + str(iom + 1) + ':\t\t\t ', 'Not present' + else: + logging.error('Unable to check IOM presence') + +print_temperature_sensors() + + +# Print the information for voltage sensors + + +def print_voltage_sensors(): + print("\nOnboard Voltage Sensors:") + + print ' CPU XP3R3V_EARLY ',\ + float(get_pmc_register('in1_input'))/1000, 'V' + print ' CPU XP5R0V_CP ',\ + float(get_pmc_register('in2_input'))/1000, 'V' + print ' CPU XP3R3V_STD ',\ + float(get_pmc_register('in3_input'))/1000, 'V' + print ' CPU XP3R3V_CP ',\ + float(get_pmc_register('in4_input'))/1000, 'V' + print ' CPU XP0R75V_VTT_A ',\ + float(get_pmc_register('in5_input'))/1000, 'V' + print ' CPU XPPR75V_VTT_B ',\ + float(get_pmc_register('in6_input'))/1000, 'V' + print ' CPU XP1R07V_CPU ',\ + float(get_pmc_register('in7_input'))/1000, 'V' + print ' CPU XP1R0V_CPU ',\ + float(get_pmc_register('in8_input'))/1000, 'V' + print ' CPU XP12R0V ',\ + float(get_pmc_register('in9_input'))/1000, 'V' + print ' CPU VDDR_CPU_2 ',\ + float(get_pmc_register('in10_input'))/1000, 'V' + print ' CPU VDDR_CPU_1 ',\ + float(get_pmc_register('in11_input'))/1000, 'V' + print ' CPU XP1R5V_CLK ',\ + float(get_pmc_register('in12_input'))/1000, 'V' + print ' CPU XP1R8V_CPU ',\ + float(get_pmc_register('in13_input'))/1000, 'V' + print ' CPU XP1R0V_CPU_VNN ',\ + float(get_pmc_register('in14_input'))/1000, 'V' + print ' CPU XP1R0V_CPU_VCC ',\ + float(get_pmc_register('in15_input'))/1000, 'V' + print ' CPU XP1R5V_EARLY ',\ + float(get_pmc_register('in16_input'))/1000, 'V' + print ' SW XP3R3V_MON ',\ + float(get_pmc_register('in17_input'))/1000, 'V' + print ' SW XP1R25V_MON ',\ + float(get_pmc_register('in19_input'))/1000, 'V' + print ' SW XP1R2V_MON ',\ + float(get_pmc_register('in20_input'))/1000, 'V' + print ' SW XP1R0V_SW_MON ',\ + float(get_pmc_register('in21_input'))/1000, 'V' + print ' SW XP1R0V_ROV_SW_MON ',\ + float(get_pmc_register('in22_input'))/1000, 'V' + print ' SW XR1R0V_BCM84752_MON ',\ + float(get_pmc_register('in23_input'))/1000, 'V' + print ' SW XP5V_MB_MON ',\ + float(get_pmc_register('in24_input'))/1000, 'V' + print ' SW XP3R3V_FPGA_MON ',\ + float(get_pmc_register('in26_input'))/1000, 'V' + print ' SW XP3R3V_EARLY_MON ',\ + float(get_pmc_register('in27_input'))/1000, 'V' + +print_voltage_sensors() + +# Print the information for 1 Fan Tray + + +def print_fan_tray(tray): + + Fan_Status = ['Normal', 'Abnormal'] + Airflow_Direction = ['B2F', 'F2B'] + + print ' Fan Tray ' + str(tray) + ':' + + if (tray == 1): + fan1_speed = get_pmc_register('fan1_input') + air_flow_reg = int(get_pmc_register('fan1_airflow'), 16) + fan1_status = 0 if fan1_speed >= 1000 else 1 + + print ' Fan Speed: ', fan1_speed, 'RPM' + print ' Fan State: ', Fan_Status[fan1_status] + print ' Air Flow: ', Airflow_Direction[air_flow_reg] + elif (tray == 2): + fan1_speed = get_pmc_register('fan3_input') + air_flow_reg = int(get_pmc_register('fan3_airflow'), 16) + fan1_status = 0 if fan1_speed >= 1000 else 1 + + print ' Fan Speed: ', fan1_speed, 'RPM' + print ' Fan State: ', Fan_Status[fan1_status] + print ' Air Flow: ', Airflow_Direction[air_flow_reg] + elif (tray == 3): + fan1_speed = get_pmc_register('fan5_input') + air_flow_reg = int(get_pmc_register('fan5_airflow'), 16) + fan1_status = 0 if fan1_speed >= 1000 else 1 + + print ' Fan Speed: ', fan1_speed, 'RPM' + print ' Fan State: ', Fan_Status[fan1_status] + print ' Air Flow: ', Airflow_Direction[air_flow_reg] + elif (tray == 4): + fan1_speed = get_pmc_register('fan7_input') + air_flow_reg = int(get_pmc_register('fan7_airflow'), 16) + fan1_status = 0 if fan1_speed >= 1000 else 1 + + print ' Fan Speed: ', fan1_speed, 'RPM' + print ' Fan State: ', Fan_Status[fan1_status] + print ' Air Flow: ', Airflow_Direction[air_flow_reg] + +print('\nFan Trays:') +fan_tray_presence = get_pmc_register('fan_tray_presence') + +if (fan_tray_presence != 'ERR'): + fan_tray_presence = int(fan_tray_presence, 16) + + for tray in range(0, S6100_MAX_FAN_TRAYS): + if (fan_tray_presence & (1 << tray)): + print_fan_tray(tray + 1) + else: + print '\n Fan Tray ' + str(tray + 1) + ': Not present' +else: + logging.error('Unable to read FAN presence') + +# Print the information for PSU1, PSU2 + + +def print_psu(psu): + Psu_Type = ['Mismatch', 'Normal'] + Psu_Input_Type = ['AC', 'DC'] + PSU_STATUS_TYPE_BIT = 4 + PSU_STATUS_INPUT_TYPE_BIT = 1 + PSU_FAN_PRESENT_BIT = 2 + PSU_FAN_STATUS_BIT = 1 + PSU_FAN_AIR_FLOW_BIT = 0 + Psu_Fan_Presence = ['Present', 'Absent'] + Psu_Fan_Status = ['Normal', 'Abnormal'] + Psu_Fan_Airflow = ['B2F', 'F2B'] + + print ' PSU ' + str(psu) + ':' + if (psu == 1): + psu_status = int(get_pmc_register('psu1_presence'), 16) + else: + psu_status = int(get_pmc_register('psu2_presence'), 16) + + psu_input_type = (psu_status & (1 << PSU_STATUS_INPUT_TYPE_BIT)) >>\ + PSU_STATUS_INPUT_TYPE_BIT + psu_type = (psu_status & (1 << PSU_STATUS_TYPE_BIT)) >>\ + PSU_STATUS_TYPE_BIT + + print ' Input: ', Psu_Input_Type[psu_input_type] + print ' Type: ', Psu_Type[psu_type] + + # PSU FAN details + if (psu == 1): + print ' FAN Speed: ', get_pmc_register('fan11_input'), 'RPM' + psu_fan_airflow = int(get_pmc_register('fan11_airflow')) + psu_fan_status = int(get_pmc_register('fan11_alarm')) + psu_fan_present = int(get_pmc_register('fan11_fault')) + input_voltage = float(get_pmc_register('in29_input')) / 1000 + output_voltage = float(get_pmc_register('in30_input')) / 1000 + input_current = float(get_pmc_register('curr601_input')) / 100 + output_current = float(get_pmc_register('curr602_input')) / 100 + input_power = float(get_pmc_register('power1_input')) / 1000000 + output_power = float(get_pmc_register('power2_input')) / 1000000 + if (input_power != 0): + psu_fan_temp = int(get_pmc_register('temp14_input'))/1000 + else: + print ' FAN Speed: ', get_pmc_register('fan12_input'), 'RPM' + psu_fan_airflow = int(get_pmc_register('fan12_airflow')) + psu_fan_status = int(get_pmc_register('fan12_alarm')) + psu_fan_present = int(get_pmc_register('fan12_fault')) + input_voltage = float(get_pmc_register('in31_input')) / 1000 + output_voltage = float(get_pmc_register('in32_input')) / 1000 + input_current = float(get_pmc_register('curr701_input')) / 100 + output_current = float(get_pmc_register('curr702_input')) / 100 + input_power = float(get_pmc_register('power3_input')) / 1000000 + output_power = float(get_pmc_register('power4_input')) / 1000000 + if (input_power != 0): + psu_fan_temp = int(get_pmc_register('temp15_input'))/1000 + print ' FAN: ', Psu_Fan_Presence[psu_fan_present] + print ' FAN Status: ', Psu_Fan_Status[psu_fan_status] + print ' FAN AIRFLOW: ', Psu_Fan_Airflow[psu_fan_airflow] + + # PSU input & output monitors + print ' Input Voltage: %6.2f' % (input_voltage), 'V' + + print ' Output Voltage: %6.2f' % (output_voltage), 'V' + + print ' Input Current: %6.2f' % (input_current), 'A' + + print ' Output Current: %6.2f' % (output_current), 'A' + + print ' Input Power: %6.2f' % (input_power), 'W' + + print ' Output Power: %6.2f' % (output_power), 'W' + + # PSU firmware gives spurious temperature reading without input power + if (input_power != 0): + print ' Temperature: ', psu_fan_temp, 'C' + else: + print ' Temperature: ', 'NA' + +print('\nPSUs:') +for psu in range(1, S6100_MAX_PSUS + 1): + + if (psu == 1): + psu_status = get_pmc_register('psu1_presence') + else: + psu_status = get_pmc_register('psu2_presence') + + if (psu_status != 'ERR'): + psu_status = int(psu_status, 16) + if (~psu_status & 0b1): + print_psu(psu) + else: + print '\n PSU ', psu, 'Not present' + else: + logging.error('Unable to check PSU presence') + +print '\n Total Power: ', get_pmc_register('current_total_power'), 'W' + +print('\nIO Modules:') + +for iom in range(1, S6100_MAX_IOMS+1): + print ' IOM ' + str(iom) + ' :' + iom_status_list[iom - 1] + +print '\n' diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/s6100_platform.sh b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/s6100_platform.sh new file mode 100755 index 000000000000..8dd76f2ea6d3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/s6100_platform.sh @@ -0,0 +1,206 @@ +#!/bin/bash + +#platform init script for Dell S6100 + +source dell_i2c_utils.sh + +init_devnum() { + found=0 + for devnum in 0 1; do + devname=`cat /sys/bus/i2c/devices/i2c-${devnum}/name` + # iSMT adapter can be at either dffd0000 or dfff0000 + if [[ $devname == 'SMBus iSMT adapter at '* ]]; then + found=1 + break + fi + done + + [[ $found -eq 0 ]] && echo "cannot find iSMT" && exit 1 +} + +# Attach/Detach CPU board mux @ 0x70 +cpu_board_mux() { + case $1 in + "new_device") i2c_config "echo pca9547 0x70 > /sys/bus/i2c/devices/i2c-${devnum}/$1" + ;; + "delete_device") i2c_config "echo 0x70 > /sys/bus/i2c/devices/i2c-${devnum}/$1" + ;; + *) echo "s6100_platform: cpu_board_mux: invalid command !" + ;; + esac +} + +# Attach/Detach Switchboard MUX @ 0x71 +switch_board_mux() { + case $1 in + "new_device") i2c_config "echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-4/$1" + ;; + "delete_device") i2c_config "echo 0x71 > /sys/bus/i2c/devices/i2c-4/$1" + ;; + *) echo "s6100_platform: switch_board_mux : invalid command !" + ;; + esac +} + +# Attach/Detach syseeprom on CPU board +sys_eeprom() { + case $1 in + "new_device") i2c_config "echo 24c02 0x50 > /sys/bus/i2c/devices/i2c-2/$1" + ;; + "delete_device") i2c_config "echo 0x50 > /sys/bus/i2c/devices/i2c-2/$1" + ;; + *) echo "s6100_platform: sys_eeprom : invalid command !" + ;; + esac +} + +#Attach/Detach CPLD devices to drivers for each IOM +switch_board_cpld() { + case $1 in + "new_device") + for ((i=14;i<=17;i++)); + do + i2c_config "echo dell_s6100_iom_cpld 0x3e > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + "delete_device") + for ((i=14;i<=17;i++)); + do + i2c_config "echo 0x3e > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + *) echo "s6100_platform: switch_board_cpld : invalid command !" + ;; + esac +} + +#Attach/Detach the MUX connecting all QSFPs on each IOM @0x71 and 0x72 +switch_board_qsfp_mux() { + case $1 in + "new_device") + for ((i=9;i>=6;i--)); + do + # 0x71 mux on the IOM 1 + mux_index=$(expr $i - 5) + echo "Attaching PCA9548 $mux_index" + i2c_config "echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-$i/$1" + i2c_config "echo pca9548 0x72 > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + "delete_device") + for ((i=9;i>=6;i--)); + do + # 0x71 mux on the IOM 1 + mux_index=$(expr $i - 5) + echo "Detaching PCA9548 $mux_index" + i2c_config "echo 0x71 > /sys/bus/i2c/devices/i2c-$devnum/i2c-$i/$1" + i2c_config "echo 0x72 > /sys/bus/i2c/devices/i2c-$devnum/i2c-$i/$1" + done + ;; + *) echo "s6100_platform: switch_board_qsfp_mux: invalid command !" + ;; + esac +} + +#Attach/Detach the SFP modules on PCA9548_2 +switch_board_sfp() { + case $1 in + "new_device") i2c_config "echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-11/$1" + i2c_config "echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-12/$1" + ;; + "delete_device") i2c_config "echo 0x50 > /sys/bus/i2c/devices/i2c-11/$1" + i2c_config "echo 0x50 > /sys/bus/i2c/devices/i2c-12/$1" + ;; + *) echo "s6100_platform: switch_board_sfp: invalid command !" + ;; + esac +} + +#Add/Delete ($1) a range ($2..$3) of QSFPs +qsfp_device_mod() { + case $1 in + "new_device") for ((i=$2;i<=$3;i++)); + do + i2c_config "echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + "delete_device") for ((i=$2;i<=$3;i++)); + do + i2c_config "echo 0x50 > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + *) echo "s6100_platform: qsfp_device_mod: invalid command $1:$2,$3!" + ;; + esac +} + +# Attach/Detach 16 instances of QSFP ports on each IO modules +# eeprom can dump data using below command +switch_board_qsfp() { + if i2c_poll_bus_exists "/sys/bus/i2c/devices/i2c-18"; then + qsfp_device_mod $1 18 33 + fi + + if i2c_poll_bus_exists "/sys/bus/i2c/devices/i2c-34"; then + qsfp_device_mod $1 34 49 + fi + + if i2c_poll_bus_exists "/sys/bus/i2c/devices/i2c-50"; then + qsfp_device_mod $1 50 65 + fi + + if i2c_poll_bus_exists "/sys/bus/i2c/devices/i2c-66"; then + qsfp_device_mod $1 66 81 + fi +} + +# Enable/Disable low power mode on all QSFP ports +switch_board_qsfp_lpmode() { + case $1 in + "enable") value=0xffff + ;; + "disable") value=0x0 + ;; + *) echo "s6100_platform: switch_board_qsfp_lpmode: invalid command $1!" + return + ;; + esac + echo $value > /sys/class/i2c-adapter/i2c-14/14-003e/qsfp_lpmode + echo $value > /sys/class/i2c-adapter/i2c-15/15-003e/qsfp_lpmode + echo $value > /sys/class/i2c-adapter/i2c-16/16-003e/qsfp_lpmode + echo $value > /sys/class/i2c-adapter/i2c-17/17-003e/qsfp_lpmode +} + +init_devnum + +if [[ "$1" == "init" ]]; then + depmod -a + modprobe i2c-dev + modprobe i2c-mux-pca954x force_deselect_on_exit=1 + modprobe dell_s6100_iom_cpld + modprobe dell_s6100_lpc + + cpu_board_mux "new_device" + switch_board_mux "new_device" + sys_eeprom "new_device" + switch_board_cpld "new_device" + switch_board_qsfp_mux "new_device" + switch_board_sfp "new_device" + switch_board_qsfp "new_device" + switch_board_qsfp_lpmode "disable" +elif [[ "$1" == "deinit" ]]; then + switch_board_sfp "delete_device" + switch_board_cpld "delete_device" + switch_board_mux "delete_device" + sys_eeprom "delete_device" + switch_board_qsfp "delete_device" + switch_board_qsfp_mux "delete_device" + cpu_board_mux "delete_device" + + modprobe -r dell_s6100_lpc + modprobe -r dell_s6100_iom_cpld + modprobe -r i2c-mux-pca954x + modprobe -r i2c-dev +else + echo "s6100_platform : Invalid option !" +fi diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/sensors b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/sensors new file mode 100755 index 000000000000..030d636a1565 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/sensors @@ -0,0 +1,7 @@ +#!/bin/bash +docker exec -i pmon sensors "$@" + +#To probe sensors not part of lm-sensors +if [ -r /usr/local/bin/platform_sensors.py ]; then + python /usr/local/bin/platform_sensors.py +fi diff --git a/platform/broadcom/sonic-platform-modules-dell/z9100/cfg/z9100-modules.conf b/platform/broadcom/sonic-platform-modules-dell/z9100/cfg/z9100-modules.conf new file mode 100644 index 000000000000..66f002a5fc94 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9100/cfg/z9100-modules.conf @@ -0,0 +1,15 @@ +# /etc/modules: kernel modules to load at boot time. +# +# This file contains the names of kernel modules that should be loaded +# at boot time, one per line. Lines beginning with "#" are ignored. + +i2c-i801 +i2c-isch +i2c-ismt +i2c-dev +i2c-mux +i2c-smbus + +i2c-mux-gpio +i2c-mux-pca954x + diff --git a/platform/broadcom/sonic-platform-modules-dell/z9100/modules/Makefile b/platform/broadcom/sonic-platform-modules-dell/z9100/modules/Makefile new file mode 100644 index 000000000000..46da5beec391 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9100/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := dell_mailbox.o dell_z9100_cpld.o + diff --git a/platform/broadcom/sonic-platform-modules-dell/z9100/modules/dell_z9100_cpld.c b/platform/broadcom/sonic-platform-modules-dell/z9100/modules/dell_z9100_cpld.c new file mode 100644 index 000000000000..01c3133354b1 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9100/modules/dell_z9100_cpld.c @@ -0,0 +1,273 @@ + + +/* Includes only 3 things. + * a. QSFP Reset control + * b. LP Mode + * c. Module Presence + */ +#include // included for all kernel modules +#include // included for KERN_INFO +#include // included for __init and __exit macros +#include +#include +#include +#include + + +//iom cpld slave address +#define IOM_CPLD_SLAVE_ADD 0x3e + +//iom cpld ver register +#define IOM_CPLD_SLAVE_VER 0x00 + +//qsfp reset cntrl reg on each iom +#define QSFP_RST_CRTL_REG0 0x10 +#define QSFP_RST_CRTL_REG1 0x11 + +//qsfp lp mode reg on each iom +#define QSFP_LPMODE_REG0 0x12 +#define QSFP_LPMODE_REG1 0x13 + +//qsfp mod presence reg on each iom +#define QSFP_MOD_PRS_REG0 0x16 +#define QSFP_MOD_PRS_REG1 0x17 + + +struct cpld_data { + struct i2c_client *client; + struct mutex update_lock; +}; + + +static void dell_z9100_iom_cpld_add_client(struct i2c_client *client) +{ + struct cpld_data *data = kzalloc(sizeof(struct cpld_data), GFP_KERNEL); + + if (!data) { + dev_dbg(&client->dev, "Can't allocate cpld_client_node (0x%x)\n", client->addr); + return; + } + + data->client = client; + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); +} + +static void dell_z9100_iom_cpld_remove_client(struct i2c_client *client) +{ + struct cpld_data *data = i2c_get_clientdata(client); + kfree(data); + return ; +} + +int dell_z9100_iom_cpld_read(struct cpld_data *data, u8 reg) +{ + int ret = -EPERM; + u8 high_reg =0x00; + + mutex_lock(&data->update_lock); + + ret = i2c_smbus_write_byte_data(data->client, high_reg,reg); + ret = i2c_smbus_read_byte(data->client); + mutex_unlock(&data->update_lock); + + return ret; +} + +int dell_z9100_iom_cpld_write(struct cpld_data *data,u8 reg, u8 value) +{ + int ret = -EIO; + u16 devdata=0; + u8 high_reg =0x00; + + mutex_lock(&data->update_lock); + devdata = (value << 8) | reg; + i2c_smbus_write_word_data(data->client,high_reg,devdata); + mutex_unlock(&data->update_lock); + + return ret; +} +static ssize_t get_cpldver(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u8 devdata=0; + struct cpld_data *data = dev_get_drvdata(dev); + + ret = dell_z9100_iom_cpld_read(data,IOM_CPLD_SLAVE_VER); + if(ret < 0) + return sprintf(buf, "read error"); + devdata = (u8)ret & 0xff; + return sprintf(buf,"IOM CPLD Version:0x%02x\n",devdata); +} + +static ssize_t get_modprs(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u16 devdata=0; + struct cpld_data *data = dev_get_drvdata(dev); + + ret = dell_z9100_iom_cpld_read(data,QSFP_MOD_PRS_REG0); + if(ret < 0) + return sprintf(buf, "read error"); + devdata = (u16)ret & 0xff; + + ret = dell_z9100_iom_cpld_read(data,QSFP_MOD_PRS_REG1); + if(ret < 0) + return sprintf(buf, "read error"); + devdata |= (u16)(ret & 0xff) << 8; + + return sprintf(buf,"0x%04x\n",devdata); +} + +static ssize_t get_lpmode(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u16 devdata=0; + struct cpld_data *data = dev_get_drvdata(dev); + + ret = dell_z9100_iom_cpld_read(data,QSFP_LPMODE_REG0); + if(ret < 0) + return sprintf(buf, "read error"); + devdata = (u16)ret & 0xff; + + ret = dell_z9100_iom_cpld_read(data,QSFP_LPMODE_REG1); + if(ret < 0) + return sprintf(buf, "read error"); + devdata |= (u16)(ret & 0xff) << 8; + + return sprintf(buf,"0x%04x\n",devdata); +} + +static ssize_t get_reset(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u16 devdata=0; + struct cpld_data *data = dev_get_drvdata(dev); + + ret = dell_z9100_iom_cpld_read(data,QSFP_RST_CRTL_REG0); + if(ret < 0) + return sprintf(buf, "read error"); + devdata = (u16)ret & 0xff; + + ret = dell_z9100_iom_cpld_read(data,QSFP_RST_CRTL_REG1); + if(ret < 0) + return sprintf(buf, "read error"); + devdata |= (u16)(ret & 0xff) << 8; + + return sprintf(buf,"0x%04x\n",devdata); +} + +static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long devdata; + int err; + struct cpld_data *data = dev_get_drvdata(dev); + + err = kstrtoul(buf, 16, &devdata); + if (err) + return err; + + dell_z9100_iom_cpld_write(data,QSFP_LPMODE_REG0,(u8)(devdata & 0xff)); + dell_z9100_iom_cpld_write(data,QSFP_LPMODE_REG1,(u8)((devdata >> 8) & 0xff)); + + return count; +} + +static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long devdata; + int err; + struct cpld_data *data = dev_get_drvdata(dev); + + err = kstrtoul(buf, 16, &devdata); + if (err) + return err; + + dell_z9100_iom_cpld_write(data,QSFP_RST_CRTL_REG0,(u8)(devdata & 0xff)); + dell_z9100_iom_cpld_write(data,QSFP_RST_CRTL_REG1,(u8)((devdata >> 8) & 0xff)); + + return count; +} + +static DEVICE_ATTR(iom_cpld_vers,S_IRUGO,get_cpldver, NULL); +static DEVICE_ATTR(qsfp_modprs, S_IRUGO,get_modprs, NULL); +static DEVICE_ATTR(qsfp_lpmode, S_IRUGO | S_IWUSR,get_lpmode,set_lpmode); +static DEVICE_ATTR(qsfp_reset, S_IRUGO | S_IWUSR,get_reset, set_reset); + +static struct attribute *i2c_cpld_attrs[] = { + &dev_attr_qsfp_lpmode.attr, + &dev_attr_qsfp_reset.attr, + &dev_attr_qsfp_modprs.attr, + &dev_attr_iom_cpld_vers.attr, + NULL, +}; + +static struct attribute_group i2c_cpld_attr_grp = { + .attrs = i2c_cpld_attrs, +}; + +static int dell_z9100_iom_cpld_probe(struct i2c_client *client, + const struct i2c_device_id *dev_id) +{ + int status; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { + dev_dbg(&client->dev, "i2c_check_functionality failed (0x%x)\n", client->addr); + status = -EIO; + goto exit; + } + + dev_info(&client->dev, "chip found- New\n"); + dell_z9100_iom_cpld_add_client(client); + + /* Register sysfs hooks */ + status = sysfs_create_group(&client->dev.kobj, &i2c_cpld_attr_grp); + if (status) { + printk(KERN_INFO "Cannot create sysfs\n"); + } + return 0; + +exit: + return status; +} + +static int dell_z9100_iom_cpld_remove(struct i2c_client *client) +{ + dell_z9100_iom_cpld_remove_client(client); + return 0; +} + + +static const struct i2c_device_id dell_z9100_iom_cpld_id[] = { + { "dell_z9100_iom_cpld", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, dell_z9100_iom_cpld_id); + +static struct i2c_driver dell_z9100_iom_cpld_driver = { + .driver = { + .name = "dell_z9100_iom_cpld", + }, + .probe = dell_z9100_iom_cpld_probe, + .remove = dell_z9100_iom_cpld_remove, + .id_table = dell_z9100_iom_cpld_id, +}; + + + +static int __init dell_z9100_iom_cpld_init(void) +{ + return i2c_add_driver(&dell_z9100_iom_cpld_driver); +} + +static void __exit dell_z9100_iom_cpld_exit(void) +{ + i2c_del_driver(&dell_z9100_iom_cpld_driver); +} + +MODULE_AUTHOR("Srideep Devireddy "); +MODULE_DESCRIPTION("dell_z9100_iom_cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(dell_z9100_iom_cpld_init); +module_exit(dell_z9100_iom_cpld_exit); diff --git a/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/check_qsfp.sh b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/check_qsfp.sh new file mode 100755 index 000000000000..38f62013e46b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/check_qsfp.sh @@ -0,0 +1,60 @@ +#!/bin/bash + +#Usage: +# check_qsfp.sh qsfp10 +# check_qsfp.sh sffp2 + +# There are 34 optics ports. 32 QSFP28, 2 SFP+ +# QSFP28 is orgainized is 3 banks +# CPLD-2 QSFP-1-12 +# CPLD-3 QSFP-13-22 +# CPLD-4 QSFP-23-32 +# SFF+ 2 ports on CPLD-4 + +optics=$1 +cpld_addr="003e" + +if [ `expr match $optics qsfp` -ne 0 ] +then + type=qsfp + id=${optics:4} + + if [ $id -le 0 -o $id -gt 32 ] + then + echo "Invalid QSFP id" + return -1 + fi + if [ $id -le 12 ] + then + #cpld=2 + cpld_bus=15 + elif [ $id -le 22 ] + then + #cpld=3 + cpld_bus=16 + else + #cpld=4 + cpld_bus=17 + fi + + if [ $id -le 8 ] + then + let qsfp_bus=42+$id + elif [ $id -le 16 ] + then + let qsfp_bus=34+${id}-8 + elif [ $id -le 24 ] + then + let qsfp_bus=26+${id}-16 + else + let qsfp_bus=18+${id}-24 + fi +else + type=sff + id=${optics:3} + cpld=4 +fi + +echo "Preence:`cat /sys/class/i2c-dev/i2c-${cpld_bus}/device/${cpld_bus}-${cpld_addr}/qsfp_modprs`" +echo "Hexdump:" +cat /sys/bus/i2c/devices/${qsfp_bus}-0050/eeprom | hexdump -C diff --git a/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/platform_sensors.py b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/platform_sensors.py new file mode 100755 index 000000000000..763e65772282 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/platform_sensors.py @@ -0,0 +1,324 @@ +#!/usr/bin/python +# +# On Z9100, the Platform Management Controller runs the +# thermal algorithm. It provides a mailbox for the Host +# to query relevant thermals. The dell_mailbox module +# provides the sysfs support for the following objects: +# * onboard temperature sensors +# * FAN trays +# * PSU + +import os +import sys +import logging + +Z9100_MAX_FAN_TRAYS = 5 +Z9100_MAX_PSUS = 2 +S6100_MAX_IOMS = 4 + +MAILBOX_DIR = "/sys/devices/platform/SMF.512/hwmon/hwmon1" + +# Get a mailbox register + + +def get_pmc_register(reg_name): + retval = 'ERR' + mb_reg_file = MAILBOX_DIR+'/'+reg_name + + if (not os.path.isfile(mb_reg_file)): + print mb_reg_file, 'not found !' + return retval + + try: + with open(mb_reg_file, 'r') as fd: + retval = fd.read() + except Exception as error: + logging.error("Unable to open ", mb_reg_file, "file !") + + retval = retval.rstrip('\r\n') + retval = retval.lstrip(" ") + return retval + +logging.basicConfig(level=logging.DEBUG) + +if (os.path.isdir(MAILBOX_DIR)): + print 'dell-s6100-lpc' + print 'Adapter: S6100 Platform Management Controller' +else: + logging.error('S6100 Platform Management Controller module not loaded !') + # sys.exit(0) + +# Print the information for temperature sensors + + +def print_temperature_sensors(): + print("\nOnboard Temperature Sensors:") + print ' CPU: ',\ + int(get_pmc_register('temp1_input'))/1000, 'C' + print ' BCM56960 (PSU side): ',\ + int(get_pmc_register('temp2_input'))/1000, 'C' + print ' System Outlet 1 (switch board): ',\ + int(get_pmc_register('temp3_input'))/1000, 'C' + print ' BCM56960 (IO side): ',\ + int(get_pmc_register('temp4_input'))/1000, 'C' + print ' System Outlet 2 (CPU board): ',\ + int(get_pmc_register('temp9_input'))/1000, 'C' + print ' System Inlet Left (IO side): ',\ + int(get_pmc_register('temp6_input'))/1000, 'C' + +print_temperature_sensors() + + +# Print the information for voltage sensors + + +def print_voltage_sensors(): + print("\nOnboard Voltage Sensors:") + + print ' CPU XP3R3V_EARLY ',\ + float(get_pmc_register('in1_input'))/1000, 'V' + print '\n CPU XP5R0V_CP ',\ + float(get_pmc_register('in2_input'))/1000, 'V' + print ' CPU XP3R3V_STD ',\ + float(get_pmc_register('in3_input'))/1000, 'V' + print ' CPU XP3R3V_CP ',\ + float(get_pmc_register('in4_input'))/1000, 'V' + print ' CPU XP0R75V_VTT_A ',\ + float(get_pmc_register('in5_input'))/1000, 'V' + print ' CPU XPPR75V_VTT_B ',\ + float(get_pmc_register('in6_input'))/1000, 'V' + print ' CPU XP1R07V_CPU ',\ + float(get_pmc_register('in7_input'))/1000, 'V' + print ' CPU XP1R0V_CPU ',\ + float(get_pmc_register('in8_input'))/1000, 'V' + print ' CPU XP12R0V ',\ + float(get_pmc_register('in9_input'))/1000, 'V' + print ' CPU VDDR_CPU_2 ',\ + float(get_pmc_register('in10_input'))/1000, 'V' + print ' CPU VDDR_CPU_1 ',\ + float(get_pmc_register('in11_input'))/1000, 'V' + print ' CPU XP1R5V_CLK ',\ + float(get_pmc_register('in12_input'))/1000, 'V' + print ' CPU XP1R8V_CPU ',\ + float(get_pmc_register('in13_input'))/1000, 'V' + print ' CPU XP1R0V_CPU_VNN ',\ + float(get_pmc_register('in14_input'))/1000, 'V' + print ' CPU XP1R0V_CPU_VCC ',\ + float(get_pmc_register('in15_input'))/1000, 'V' + print ' CPU XP1R5V_EARLY ',\ + float(get_pmc_register('in16_input'))/1000, 'V' + print ' SW XP3R3V_MON ',\ + float(get_pmc_register('in17_input'))/1000, 'V' + print ' SW XP1R8V_MON ',\ + float(get_pmc_register('in19_input'))/1000, 'V' + print ' SW XP1R2V_MON ',\ + float(get_pmc_register('in20_input'))/1000, 'V' + print ' SW XP1R0V_SW_MON ',\ + float(get_pmc_register('in21_input'))/1000, 'V' + print ' SW XP1R0V_ROV_SW_MON ',\ + float(get_pmc_register('in22_input'))/1000, 'V' + print ' SW XR1R0V_BCM84752_MON ',\ + float(get_pmc_register('in23_input'))/1000, 'V' + print ' SW XP5V_MB_MON ',\ + float(get_pmc_register('in24_input'))/1000, 'V' + print ' SW XP1R8V_FPGA_MON ',\ + float(get_pmc_register('in25_input'))/1000, 'V' + print ' SW XP3R3V_FPGA_MON ',\ + float(get_pmc_register('in26_input'))/1000, 'V' + print ' SW XP3R3V_EARLY_MON ',\ + float(get_pmc_register('in27_input'))/1000, 'V' + print ' SW XP1R0V_ ',\ + float(get_pmc_register('curr21_input'))/10000, 'A' + print ' SW XP1R0V_ROV ',\ + float(get_pmc_register('curr22_input'))/10000, 'A' + + + +print_voltage_sensors() + +# Print the information for 1 Fan Tray + + +def print_fan_tray(tray): + + Fan_Status = ['Normal', 'Abnormal'] + Airflow_Direction = ['B2F', 'F2B'] + + print ' Fan Tray ' + str(tray) + ':' + + if (tray == 1): + fan1_speed = get_pmc_register('fan1_input') + fan2_speed = get_pmc_register('fan2_input') + air_flow_reg = int(get_pmc_register('fan1_airflow'), 16) + fan1_status = 0 if fan1_speed >= 1000 else 1 + fan2_status = 0 if fan2_speed >= 1000 else 1 + + print ' Fan1 Speed: ', fan1_speed, 'RPM' + print ' Fan2 Speed: ', fan2_speed, 'RPM' + print ' Fan1 State: ', Fan_Status[fan1_status] + print ' Fan2 State: ', Fan_Status[fan2_status] + print ' Air Flow: ', Airflow_Direction[air_flow_reg] + elif (tray == 2): + fan1_speed = get_pmc_register('fan3_input') + fan2_speed = get_pmc_register('fan4_input') + air_flow_reg = int(get_pmc_register('fan3_airflow'), 16) + fan1_status = 0 if fan1_speed >= 1000 else 1 + fan2_status = 0 if fan2_speed >= 1000 else 1 + + print ' Fan1 Speed: ', fan1_speed, 'RPM' + print ' Fan2 Speed: ', fan2_speed, 'RPM' + print ' Fan1 State: ', Fan_Status[fan1_status] + print ' Fan2 State: ', Fan_Status[fan2_status] + print ' Air Flow: ', Airflow_Direction[air_flow_reg] + elif (tray == 3): + fan1_speed = get_pmc_register('fan5_input') + fan2_speed = get_pmc_register('fan6_input') + air_flow_reg = int(get_pmc_register('fan5_airflow'), 16) + fan1_status = 0 if fan1_speed >= 1000 else 1 + fan2_status = 0 if fan2_speed >= 1000 else 1 + + print ' Fan1 Speed: ', fan1_speed, 'RPM' + print ' Fan2 Speed: ', fan2_speed, 'RPM' + print ' Fan1 State: ', Fan_Status[fan1_status] + print ' Fan2 State: ', Fan_Status[fan2_status] + print ' Air Flow: ', Airflow_Direction[air_flow_reg] + elif (tray == 4): + fan1_speed = get_pmc_register('fan7_input') + fan2_speed = get_pmc_register('fan8_input') + air_flow_reg = int(get_pmc_register('fan7_airflow'), 16) + fan1_status = 0 if fan1_speed >= 1000 else 1 + fan2_status = 0 if fan2_speed >= 1000 else 1 + + print ' Fan1 Speed: ', fan1_speed, 'RPM' + print ' Fan2 Speed: ', fan2_speed, 'RPM' + print ' Fan1 State: ', Fan_Status[fan1_status] + print ' Fan2 State: ', Fan_Status[fan2_status] + print ' Air Flow: ', Airflow_Direction[air_flow_reg] + elif (tray == 5): + fan1_speed = get_pmc_register('fan9_input') + fan2_speed = get_pmc_register('fan10_input') + air_flow_reg = int(get_pmc_register('fan9_airflow'), 16) + fan1_status = 0 if fan1_speed >= 1000 else 1 + fan2_status = 0 if fan2_speed >= 1000 else 1 + + print ' Fan1 Speed: ', fan1_speed, 'RPM' + print ' Fan2 Speed: ', fan2_speed, 'RPM' + print ' Fan1 State: ', Fan_Status[fan1_status] + print ' Fan2 State: ', Fan_Status[fan2_status] + print ' Air Flow: ', Airflow_Direction[air_flow_reg] + + +print('\nFan Trays:') +fan_tray_presence = get_pmc_register('fan_tray_presence') + +if (fan_tray_presence != 'ERR'): + fan_tray_presence = int(fan_tray_presence, 16) + + for tray in range(0, Z9100_MAX_FAN_TRAYS): + if (fan_tray_presence & (1 << tray)): + print_fan_tray(tray + 1) + else: + print '\n Fan Tray ' + str(tray + 1) + ': Not present' +else: + logging.error('Unable to read FAN presence') + +# Print the information for PSU1, PSU2 + + +def print_psu(psu): + Psu_Type = ['Normal', 'Mismatch'] + Psu_Input_Type = ['AC', 'DC'] + PSU_STATUS_TYPE_BIT = 4 + PSU_STATUS_INPUT_TYPE_BIT = 1 + PSU_FAN_PRESENT_BIT = 2 + PSU_FAN_STATUS_BIT = 1 + PSU_FAN_AIR_FLOW_BIT = 0 + Psu_Fan_Presence = ['Present', 'Absent'] + Psu_Fan_Status = ['Normal', 'Abnormal'] + Psu_Fan_Airflow = ['B2F', 'F2B'] + + + print ' PSU ' + str(psu) + ':' + if (psu == 1): + psu_status = int(get_pmc_register('psu1_presence'), 16) + else: + psu_status = int(get_pmc_register('psu2_presence'), 16) + + psu_input_type = (psu_status & (1 << PSU_STATUS_INPUT_TYPE_BIT)) >>\ + PSU_STATUS_INPUT_TYPE_BIT + psu_type = (psu_status & (1 << PSU_STATUS_TYPE_BIT)) >>\ + PSU_STATUS_TYPE_BIT + + print ' Input: ', Psu_Input_Type[psu_input_type] + print ' Type: ', Psu_Type[psu_type] + + # PSU FAN details + if (psu == 1): + print ' FAN Speed: ', get_pmc_register('fan11_input'), 'RPM' + psu_fan_airflow = int(get_pmc_register('fan11_airflow')) + psu_fan_status = int(get_pmc_register('fan11_alarm')) + psu_fan_present = int(get_pmc_register('fan11_fault')) + input_voltage = float(get_pmc_register('in29_input')) / 1000 + output_voltage = float(get_pmc_register('in30_input')) / 1000 + input_current = float(get_pmc_register('curr601_input')) / 100 + output_current = float(get_pmc_register('curr602_input')) /100 + input_power = float(get_pmc_register('power1_input')) / 1000000 + output_power = float(get_pmc_register('power2_input')) / 1000000 + if (input_power != 0): + psu_fan_temp = int(get_pmc_register('temp14_input'))/1000 + else: + print ' FAN Speed: ', get_pmc_register('fan12_input'), 'RPM' + psu_fan_airflow = int(get_pmc_register('fan12_airflow')) + psu_fan_status = int(get_pmc_register('fan12_alarm')) + psu_fan_present = int(get_pmc_register('fan12_fault')) + input_voltage = float(get_pmc_register('in31_input')) / 1000 + output_voltage = float(get_pmc_register('in32_input')) / 1000 + input_current = float(get_pmc_register('curr701_input')) / 100 + output_current = float(get_pmc_register('curr702_input')) / 100 + input_power = float(get_pmc_register('power3_input')) / 1000000 + output_power = float(get_pmc_register('power4_input')) / 1000000 + if (input_power != 0): + psu_fan_temp = int(get_pmc_register('temp15_input'))/1000 + + print ' FAN: ', Psu_Fan_Presence[psu_fan_present] + print ' FAN Status: ', Psu_Fan_Status[psu_fan_status] + print ' FAN AIRFLOW: ', Psu_Fan_Airflow[psu_fan_airflow] + + # PSU input & output monitors + print ' Input Voltage: %6.2f' % (input_voltage), 'V' + + print ' Output Voltage: %6.2f' % (output_voltage), 'V' + + print ' Input Current: %6.2f' % (input_current), 'A' + + print ' Output Current: %6.2f' % (output_current), 'A' + + print ' Input Power: %6.2f' % (input_power), 'W' + + print ' Output Power: %6.2f' % (output_power), 'W' + + # PSU firmware gives spurious temperature reading without input power + if (input_power != 0): + print ' Temperature: ', psu_fan_temp, 'C' + else: + print ' Temperature: ', 'NA' + +print('\nPSUs:') +for psu in range(1, Z9100_MAX_PSUS + 1): + + if (psu == 1): + psu_status = get_pmc_register('psu1_presence') + else: + psu_status = get_pmc_register('psu2_presence') + + if (psu_status != 'ERR'): + psu_status = int(psu_status, 16) + + if (~psu_status & 0b1): + print_psu(psu) + else: + print '\n PSU ', psu, 'Not present' + else: + logging.error('Unable to check PSU presence') + +print '\n Total Power: ', get_pmc_register('current_total_power'), 'W' diff --git a/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/sensors b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/sensors new file mode 100755 index 000000000000..030d636a1565 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/sensors @@ -0,0 +1,7 @@ +#!/bin/bash +docker exec -i pmon sensors "$@" + +#To probe sensors not part of lm-sensors +if [ -r /usr/local/bin/platform_sensors.py ]; then + python /usr/local/bin/platform_sensors.py +fi diff --git a/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/z9100_platform.sh b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/z9100_platform.sh new file mode 100755 index 000000000000..3c3fe31e9cbd --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/z9100_platform.sh @@ -0,0 +1,170 @@ +#!/bin/bash + +#platform init script for Dell Z9100 + +source dell_i2c_utils.sh + +init_devnum() { + found=0 + for devnum in 0 1; do + devname=`cat /sys/bus/i2c/devices/i2c-${devnum}/name` + # iSMT adapter can be at either dffd0000 or dfff0000 + if [[ $devname == 'SMBus iSMT adapter at '* ]]; then + found=1 + break + fi + done + + [[ $found -eq 0 ]] && echo "cannot find iSMT" && exit 1 +} + +# Attach/Detach CPU board mux @ 0x70 +cpu_board_mux() { + case $1 in + "new_device") i2c_config "echo pca9547 0x70 > /sys/bus/i2c/devices/i2c-${devnum}/$1" + ;; + "delete_device") i2c_config "echo 0x70 > /sys/bus/i2c/devices/i2c-${devnum}/$1" + ;; + *) echo "z9100_platform: cpu_board_mux: invalid command !" + ;; + esac +} + +# Attach/Detach switch board MUX to IOM CPLDs @ 0x71 +switch_board_mux() { + case $1 in + "new_device") i2c_config "echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-4/$1" + ;; + "delete_device") i2c_config "echo 0x71 > /sys/bus/i2c/devices/i2c-4/$1" + ;; + *) echo "z9100_platform: switch_board_mux : invalid command !" + ;; + esac +} + +# Attach/Detach syseeprom on CPU board +sys_eeprom() { + case $1 in + "new_device") i2c_config "echo 24c02 0x50 > /sys/bus/i2c/devices/i2c-2/$1" + ;; + "delete_device") i2c_config "echo 0x50 > /sys/bus/i2c/devices/i2c-2/$1" + ;; + *) echo "z9100_platform: sys_eeprom : invalid command !" + ;; + esac +} + +#Attach/Detach cpld devices to drivers for each iom +switch_board_cpld() { + case $1 in + "new_device") + for ((i=14;i<=17;i++)); + do + i2c_config "echo dell_z9100_iom_cpld 0x3e > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + "delete_device") + for ((i=14;i<=17;i++)); + do + i2c_config "echo 0x3e > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + *) echo "z9100_platform: switch_board_cpld : invalid command !" + ;; + esac +} + +#Attach/Detach the MUX connecting all QSFPs +switch_board_qsfp_mux() { + case $1 in + "new_device") + for ((i=9;i>=6;i--)); + do + # 0x71 mux on the IOM 1 + mux_index=$(expr $i - 5) + echo "Attaching PCA9548 $mux_index" + i2c_config "echo pca9548 0x71 > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + "delete_device") + for ((i=9;i>=6;i--)); + do + # 0x71 mux on the IOM 1 + mux_index=$(expr $i - 5) + echo "Detaching PCA9548 $mux_index" + i2c_config "echo 0x71 > /sys/bus/i2c/devices/i2c-$devnum/i2c-$i/$1" + done + ;; + *) echo "z9100_platform: switch_board_qsfp_mux: invalid command !" + ;; + esac +} + +#Attach/Detach the SFP modules on PCA9548_2 +switch_board_sfp() { + case $1 in + "new_device") i2c_config "echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-11/$1" + i2c_config "echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-12/$1" + ;; + "delete_device") i2c_config "echo 0x50 > /sys/bus/i2c/devices/i2c-11/$1" + i2c_config "echo 0x50 > /sys/bus/i2c/devices/i2c-12/$1" + ;; + *) echo "z9100_platform: switch_board_sfp: invalid command !" + ;; + esac +} + +# Attach/Detach 32 instances of EEPROM driver QSFP ports on IO module 1 +#eeprom can dump data using below command +switch_board_qsfp() { + case $1 in + "new_device") + for ((i=18;i<=49;i++)); + do + i2c_config "echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + "delete_device") + for ((i=18;i<=49;i++)); + do + i2c_config "echo 0x50 > /sys/bus/i2c/devices/i2c-$i/$1" + done + ;; + + *) echo "z9100_platform: switch_board_qsfp: invalid command !" + ;; + esac +} + +init_devnum + +if [[ "$1" == "init" ]]; then + depmod -a + modprobe i2c-dev + modprobe i2c-mux-pca954x force_deselect_on_exit=1 + modprobe dell_mailbox + modprobe dell_z9100_cpld + + cpu_board_mux "new_device" + switch_board_mux "new_device" + sys_eeprom "new_device" + switch_board_cpld "new_device" + switch_board_qsfp_mux "new_device" + switch_board_sfp "new_device" + switch_board_qsfp "new_device" +elif [[ "$1" == "deinit" ]]; then + switch_board_sfp "delete_device" + switch_board_cpld "delete_device" + switch_board_mux "delete_device" + sys_eeprom "delete_device" + switch_board_qsfp "delete_device" + switch_board_qsfp_mux "delete_device" + cpu_board_mux "delete_device" + + modprobe -r dell_z9100_cpld + modprobe -r dell_mailbox + modprobe -r i2c-mux-pca954x + modprobe -r i2c-dev +else + echo "z9100_platform : Invalid option !" +fi diff --git a/platform/broadcom/sonic-platform-modules-dell/z9264f/cfg/z9264f-modules.conf b/platform/broadcom/sonic-platform-modules-dell/z9264f/cfg/z9264f-modules.conf new file mode 100644 index 000000000000..959ac8290642 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9264f/cfg/z9264f-modules.conf @@ -0,0 +1,19 @@ +# /etc/modules: kernel modules to load at boot time. +# +# This file contains the names of kernel modules that should be loaded +# at boot time, one per line. Lines beginning with "#" are ignored. + +i2c-i801 +i2c-isch +i2c-ismt +i2c-dev +i2c-mux +i2c-smbus + +i2c-mux-gpio +i2c-mux-pca954x + +ipmi_devintf +ipmi_si +dell_z9264f_fpga_ocores +i2c_ocores diff --git a/platform/broadcom/sonic-platform-modules-dell/z9264f/modules/Makefile b/platform/broadcom/sonic-platform-modules-dell/z9264f/modules/Makefile new file mode 100644 index 000000000000..a162f0d34bfc --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9264f/modules/Makefile @@ -0,0 +1,2 @@ +obj-m := dell_z9264f_fpga_ocores.o + diff --git a/platform/broadcom/sonic-platform-modules-dell/z9264f/modules/dell_z9264f_fpga_ocores.c b/platform/broadcom/sonic-platform-modules-dell/z9264f/modules/dell_z9264f_fpga_ocores.c new file mode 100644 index 000000000000..35ea1f812e9e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9264f/modules/dell_z9264f_fpga_ocores.c @@ -0,0 +1,1418 @@ + /* + * Copyright (C) 2018 Joyce Yu + * + * Licensed under the GNU General Public License Version 2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +/** + * @file fpga_ocores.c + * @brief This is a driver to interface with Linux Open Cores driver for FPGA i2c access + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include //siginfo +#include //rcu_read_lock +#include //kernel_version +#include +#include +#include +#include +#include + + +void __iomem * fpga_base_addr = NULL; + +#define DRIVER_NAME "fpgapci" +#define PCI_NUM_BARS 4 + +/* Maximum size of driver buffer (allocated with kalloc()). + * Needed to copy data from user to kernel space, among other + * things. */ +static const size_t BUF_SIZE = PAGE_SIZE; + +/* Device data used by this driver. */ +struct fpgapci_dev { + /* the kernel pci device data structure */ + struct pci_dev *pci_dev; + + /* upstream root node */ + struct pci_dev *upstream; + + /* kernels virtual addr. for the mapped BARs */ + void * __iomem bar[PCI_NUM_BARS]; + + /* length of each memory region. Used for error checking. */ + size_t bar_length[PCI_NUM_BARS]; + + /* Debug data */ + /* number of hw interrupts handled. */ + int num_handled_interrupts; + int num_undelivered_signals; + int pci_gen; + int pci_num_lanes; + + unsigned int irq_first; + unsigned int irq_length; + unsigned int irq_assigned; + +}; + +static int use_irq = 0; +module_param(use_irq, int, 0644); +MODULE_PARM_DESC(use_irq, "Get an use_irq value from user...\n"); + + +/* Xilinx FPGA PCIE info: */ +/* Non-VGA unclassified device: Xilinx Corporation Device 7021*/ +/* Subsystem: Xilinx Corporation Device 0007 */ +//#define VENDOR 0x10EE +#define DEVICE 0x7021 +static phys_addr_t fpga_phys_addr; + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + + +/* struct to hold data related to the pcie device */ +struct pci_data_struct{ + struct pci_dev* dev; + unsigned long long phy_addr_bar0; + unsigned long long phy_len_bar0; + unsigned long long phy_flags_bar0; + unsigned int irq_first; + unsigned int irq_length; + unsigned int irq_assigned; + void * kvirt_addr_bar0; +}; + + +/* Static function declarations */ +static int fpgapci_probe(struct pci_dev *dev, const struct pci_device_id *id); +static void fpgapci_remove(struct pci_dev *dev); + +static int scan_bars(struct fpgapci_dev *fpgapci, struct pci_dev *dev); +static int map_bars(struct fpgapci_dev *fpgapci, struct pci_dev *dev); +static void free_bars(struct fpgapci_dev *fpgapci, struct pci_dev *dev); + + +//#define kernel_debug + +struct ocores_i2c { + void __iomem *base; + u32 reg_shift; + u32 reg_io_width; + wait_queue_head_t wait; + //struct i2c_adapter adap; + struct i2c_msg *msg; + int pos; + int nmsgs; + int state; /* see STATE_ */ + //struct clk *clk; + int ip_clock_khz; + int bus_clock_khz; + void (*setreg)(struct ocores_i2c *i2c, int reg, u8 value); + u8 (*getreg)(struct ocores_i2c *i2c, int reg); + u32 timeout; + struct mutex lock; +}; +/* registers */ +#define OCI2C_PRELOW 0 +#define OCI2C_PREHIGH 1 +#define OCI2C_CONTROL 2 +#define OCI2C_DATA 3 +#define OCI2C_CMD 4 /* write only */ +#define OCI2C_STATUS 4 /* read only, same address as OCI2C_CMD */ +#define OCI2C_VER 5 + + + +#define OCI2C_CTRL_IEN 0x40 +#define OCI2C_CTRL_EN 0x80 + +#define OCI2C_CMD_START 0x91 +#define OCI2C_CMD_STOP 0x41 +#define OCI2C_CMD_READ 0x21 +#define OCI2C_CMD_WRITE 0x11 +#define OCI2C_CMD_READ_ACK 0x21 +#define OCI2C_CMD_READ_NACK 0x29 +#define OCI2C_CMD_IACK 0x01 + +#define OCI2C_STAT_IF 0x01 +#define OCI2C_STAT_TIP 0x02 +#define OCI2C_STAT_ARBLOST 0x20 +#define OCI2C_STAT_BUSY 0x40 +#define OCI2C_STAT_NACK 0x80 + +/* SR[7:0] - Status register */ +#define OCI2C_SR_RXACK (1 << 7) /* Receive acknowledge from slave ‘1Â’ = No acknowledge received*/ +#define OCI2C_SR_BUSY (1 << 6) /* Busy, I2C bus busy (as defined by start / stop bits) */ +#define OCI2C_SR_AL (1 << 5) /* Arbitration lost - core lost arbitration */ +#define OCI2C_SR_TIP (1 << 1) /* Transfer in progress */ +#define OCI2C_SR_IF (1 << 0) /* Interrupt flag */ + +#if 0 +#define STATE_DONE 0 +#define STATE_START 1 +#define STATE_WRITE 2 +#define STATE_READ 3 +#define STATE_ERROR 4 +#else +enum { + STATE_DONE = 0, + STATE_INIT, + STATE_ADDR, + STATE_ADDR10, + STATE_START, + STATE_WRITE, + STATE_READ, + STATE_ERROR, +}; +#endif + +#define TYPE_OCORES 0 +#define TYPE_GRLIB 1 + +/*I2C_CH1 Offset address from PCIE BAR 0*/ +#define OCORES_I2C_BASE 0x00006000 +#define OCORES_CH_OFFSET 0x10 + +#define i2c_bus_controller_numb 1 +#define I2C_PCI_MAX_BUS (16) +#define CLS_I2C_CLOCK_LEGACY 0 +#define CLS_I2C_CLOCK_PRESERVE (~0U) + +static struct ocores_i2c opencores_i2c[I2C_PCI_MAX_BUS]; +static struct i2c_adapter i2c_pci_adap[I2C_PCI_MAX_BUS]; +static struct mutex i2c_xfer_lock[I2C_PCI_MAX_BUS]; + +static void oc_setreg_8(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite8(value, i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_16(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite16(value, i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_32(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite32(value, i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_16be(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite16be(value, i2c->base + (reg << i2c->reg_shift)); +} + +static void oc_setreg_32be(struct ocores_i2c *i2c, int reg, u8 value) +{ + iowrite32be(value, i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_8(struct ocores_i2c *i2c, int reg) +{ + return ioread8(i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_16(struct ocores_i2c *i2c, int reg) +{ + return ioread16(i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_32(struct ocores_i2c *i2c, int reg) +{ + return ioread32(i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_16be(struct ocores_i2c *i2c, int reg) +{ + return ioread16be(i2c->base + (reg << i2c->reg_shift)); +} + +static inline u8 oc_getreg_32be(struct ocores_i2c *i2c, int reg) +{ + return ioread32be(i2c->base + (reg << i2c->reg_shift)); +} + +static inline void oc_setreg(struct ocores_i2c *i2c, int reg, u8 value) +{ + i2c->setreg(i2c, reg, value); +} + +static inline u8 oc_getreg(struct ocores_i2c *i2c, int reg) +{ + return i2c->getreg(i2c, reg); +} + + +static void ocores_dump(struct ocores_i2c *i2c) +//static void __maybe_unused ocores_dump(struct ocores_i2c *i2c) +{ + u8 tmp; + + printk(KERN_DEBUG "Opencores register dump:\n"); + + tmp = oc_getreg(i2c, OCI2C_PRELOW); + printk(KERN_DEBUG "OCI2C_PRELOW (%d) = 0x%x\n",OCI2C_PRELOW,tmp); + + tmp = oc_getreg(i2c, OCI2C_PREHIGH); + printk(KERN_DEBUG "OCI2C_PREHIGH(%d) = 0x%x\n",OCI2C_PREHIGH,tmp); + + tmp = oc_getreg(i2c, OCI2C_CONTROL); + printk(KERN_DEBUG "OCI2C_CONTROL(%d) = 0x%x\n",OCI2C_CONTROL,tmp); + + tmp = oc_getreg(i2c, OCI2C_DATA); + printk(KERN_DEBUG "OCI2C_DATA (%d) = 0x%x\n",OCI2C_DATA,tmp); + + tmp = oc_getreg(i2c, OCI2C_CMD); + printk(KERN_DEBUG "OCI2C_CMD (%d) = 0x%x\n",OCI2C_CMD,tmp); +} + +static void ocores_stop(struct ocores_i2c *i2c) +{ + //unsigned long time_out = jiffies + msecs_to_jiffies(i2c->timeout); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); +} + +/* + * dell_get_mutex must be called prior to calling this function. + */ +static int ocores_poll(struct ocores_i2c *i2c) +{ + u8 stat = oc_getreg(i2c, OCI2C_STATUS); + struct i2c_msg *msg = i2c->msg; + u8 addr; + + /* Ready? */ + if (stat & OCI2C_STAT_TIP) + return -EBUSY; + + if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) { + /* Stop has been sent */ + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); + if (i2c->state == STATE_ERROR) + return -EIO; + return 0; + } + + /* Error? */ + if (stat & OCI2C_STAT_ARBLOST) { + i2c->state = STATE_ERROR; + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + return -EAGAIN; + } + + if (i2c->state == STATE_INIT) { + if (stat & OCI2C_STAT_BUSY) + return -EBUSY; + + i2c->state = STATE_ADDR; + } + + if (i2c->state == STATE_ADDR) { + /* 10 bit address? */ + if (i2c->msg->flags & I2C_M_TEN) { + addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6); + i2c->state = STATE_ADDR10; + } else { + addr = (i2c->msg->addr << 1); + i2c->state = STATE_START; + } + + /* Set read bit if necessary */ + addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0; + + oc_setreg(i2c, OCI2C_DATA, addr); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); + + return 0; + } + + /* Second part of 10 bit addressing */ + if (i2c->state == STATE_ADDR10) { + oc_setreg(i2c, OCI2C_DATA, i2c->msg->addr & 0xff); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE); + + i2c->state = STATE_START; + return 0; + } + + if (i2c->state == STATE_START || i2c->state == STATE_WRITE) { + i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE; + + if (stat & OCI2C_STAT_NACK) { + i2c->state = STATE_ERROR; + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + return -ENXIO; + } + } else { + msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA); + } + + if (i2c->pos >= msg->len) { + i2c->nmsgs--; + i2c->msg++; + i2c->pos = 0; + msg = i2c->msg; + + if (i2c->nmsgs) { + if (!(msg->flags & I2C_M_NOSTART)) { + i2c->state = STATE_ADDR; + return 0; + } else { + i2c->state = (msg->flags & I2C_M_RD) + ? STATE_READ : STATE_WRITE; + } + } else { + i2c->state = STATE_DONE; + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + return 0; + } + } + + if (i2c->state == STATE_READ) { + oc_setreg(i2c, OCI2C_CMD, i2c->pos == (msg->len - 1) ? + OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK); + } else { + oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE); + } + + return 0; +} + +static void ocores_process(struct ocores_i2c *i2c) +{ + struct i2c_msg *msg = i2c->msg; + u8 stat = oc_getreg(i2c, OCI2C_STATUS); + //unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + printk(KERN_DEBUG "ocores_process in. status reg :0x%x\n", stat); + if ((i2c->state == STATE_DONE) || (i2c->state == STATE_ERROR)) { + /* stop has been sent */ + printk(KERN_DEBUG "ocores_process OCI2C_CMD_IACK stat = 0x%x Set OCI2C_CMD(0%x) OCI2C_CMD_IACK = 0x%x\n",stat, OCI2C_CMD, OCI2C_CMD_IACK); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); + wake_up(&i2c->wait); + return; + } + + /* error? */ + if (stat & OCI2C_STAT_ARBLOST) { + i2c->state = STATE_ERROR; + printk(KERN_DEBUG "ocores_process OCI2C_STAT_ARBLOST OCI2C_CMD_STOP\n"); + ocores_stop(i2c); + return; + } + + if ((i2c->state == STATE_START) || (i2c->state == STATE_WRITE)) { + i2c->state = + (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE; + printk(KERN_DEBUG "ocores_process i2c->state =%d\n",i2c->state); + + if (stat & OCI2C_STAT_NACK) { + i2c->state = STATE_ERROR; + printk(KERN_DEBUG "ocores_process OCI2C_STAT_NACK OCI2C_CMD_STOP\n"); + ocores_stop(i2c);//oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + return; + } + } else + { + msg->buf[i2c->pos++] = oc_getreg(i2c, OCI2C_DATA); + printk(KERN_DEBUG "ocores_process oc_getreg OCI2C_DATA(0x%x) msg->buf[%d] = 0x%x\n",OCI2C_DATA, i2c->pos, msg->buf[i2c->pos]); + } + + /* end of msg? */ + if (i2c->pos == msg->len) { + i2c->nmsgs--; + i2c->msg++; + i2c->pos = 0; + msg = i2c->msg; + + if (i2c->nmsgs) { /* end? */ + /* send start? */ + if (!(msg->flags & I2C_M_NOSTART)) { + //addr = i2c_8bit_addr_from_msg(msg); + u8 addr = (msg->addr << 1); + + if (msg->flags & I2C_M_RD) + addr |= 1; + + i2c->state = STATE_START; + printk(KERN_DEBUG "Set OCI2C_CMD(0%x) addr = 0x%x\n",OCI2C_CMD, addr); + oc_setreg(i2c, OCI2C_DATA, addr); + printk(KERN_DEBUG "Set OCI2C_CMD(0%x) OCI2C_CMD_START = 0x%x\n",OCI2C_CMD, OCI2C_CMD_START); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); + return; + } else + { + i2c->state = (msg->flags & I2C_M_RD) + ? STATE_READ : STATE_WRITE; + printk(KERN_DEBUG "ocores_process end i2c->state =%d\n",i2c->state); + } + } else { + i2c->state = STATE_DONE; + printk(KERN_DEBUG "ocores_process end i2c->state = STATE_DONE ocores_stop\n"); + ocores_stop(i2c);//oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_STOP); + return; + } + } + + if (i2c->state == STATE_READ) { + printk(KERN_DEBUG "ocores_poll STATE_READ i2c->pos=%d msg->len-1 = 0x%x set OCI2C_CMD = 0x%x\n",i2c->pos, msg->len-1, + i2c->pos == (msg->len-1) ? OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK); + oc_setreg(i2c, OCI2C_CMD, i2c->pos == (msg->len-1) ? + OCI2C_CMD_READ_NACK : OCI2C_CMD_READ_ACK); + } else { + printk(KERN_DEBUG "ocores_process set OCI2C_DATA(0x%x)\n",OCI2C_DATA); + oc_setreg(i2c, OCI2C_DATA, msg->buf[i2c->pos++]); + printk(KERN_DEBUG "ocores_process set OCI2C_CMD(0x%x) OCI2C_CMD_WRITE = 0x%x\n",OCI2C_CMD, OCI2C_CMD_WRITE); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_WRITE); + } +} + +static irqreturn_t ocores_isr(int irq, void *dev_id) +{ + struct ocores_i2c *i2c = dev_id; + ocores_process(i2c); + + return IRQ_HANDLED; +} +void dell_get_mutex(struct ocores_i2c *i2c) +{ + mutex_lock(&i2c->lock); +} + +/** + * dell_release_mutex - release mutex + */ +void dell_release_mutex(struct ocores_i2c *i2c) +{ + mutex_unlock(&i2c->lock); +} + +static int ocores_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct ocores_i2c *i2c = i2c_get_adapdata(adap); + unsigned long orig_jiffies; + int ret; + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + //printk("%s(), line:%d\n", __func__, __LINE__); + + i2c->msg = msgs; + i2c->pos = 0; + i2c->nmsgs = num; + i2c->state = (use_irq == 1) ? STATE_START : STATE_INIT; + + //printk(KERN_DEBUG "i2c->msg->addr = 0x%x i2c->msg->flags = 0x%x\n",i2c->msg->addr,i2c->msg->flags); + //printk(KERN_DEBUG "I2C_M_RD = 0x%x i2c->msg->addr << 1 = 0x%x\n",I2C_M_RD,i2c->msg->addr << 1); + + //ocores_dump(i2c); + if (!use_irq) { + /* Handle the transfer */ + while (time_before(jiffies, timeout)) { + dell_get_mutex(i2c); + ret = ocores_poll(i2c); + dell_release_mutex(i2c); + + if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) + return (i2c->state == STATE_DONE) ? num : ret; + + if (ret == 0) + timeout = jiffies + HZ; + + usleep_range(5, 15); + } + + i2c->state = STATE_ERROR; + + return -ETIMEDOUT; + + + } else { + printk(KERN_DEBUG "Set OCI2C_DATA(0%x) val = 0x%x\n",OCI2C_DATA, + (i2c->msg->addr << 1) | ((i2c->msg->flags & I2C_M_RD) ? 1:0)); + oc_setreg(i2c, OCI2C_DATA, + (i2c->msg->addr << 1) | + ((i2c->msg->flags & I2C_M_RD) ? 1:0)); + printk(KERN_DEBUG "Set OCI2C_CMD(0%x) val = 0x%x\n",OCI2C_CMD, OCI2C_CMD_START); + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_START); + + /* Interrupt mode */ + if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) || + (i2c->state == STATE_DONE), HZ)) + return (i2c->state == STATE_DONE) ? num : -EIO; + else + return -ETIMEDOUT; + } +} + +static int ocores_init(struct ocores_i2c *i2c) +{ + int prescale; + int diff; + u8 ctrl; + + if (i2c->reg_io_width == 0) + i2c->reg_io_width = 1; /* Set to default value */ + + if (!i2c->setreg || !i2c->getreg) { + bool be = 0; //1:big_endian 0:little_endian + + switch (i2c->reg_io_width) { + case 1: + i2c->setreg = oc_setreg_8; + i2c->getreg = oc_getreg_8; + break; + + case 2: + i2c->setreg = be ? oc_setreg_16be : oc_setreg_16; + i2c->getreg = be ? oc_getreg_16be : oc_getreg_16; + break; + + case 4: + i2c->setreg = be ? oc_setreg_32be : oc_setreg_32; + i2c->getreg = be ? oc_getreg_32be : oc_getreg_32; + break; + + default: + printk(KERN_ERR "Unsupported I/O width (%d)\n", + i2c->reg_io_width); + return -EINVAL; + } + } + + ctrl = oc_getreg(i2c, OCI2C_CONTROL); + printk(KERN_DEBUG "%s(), line:%d\n", __func__, __LINE__); + printk(KERN_DEBUG "i2c->base = 0x%p\n",i2c->base); + + printk(KERN_DEBUG "ctrl = 0x%x\n",ctrl); + printk(KERN_DEBUG "set ctrl = 0x%x\n",ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); + + /* make sure the device is disabled */ + oc_setreg(i2c, OCI2C_CONTROL, ctrl & ~(OCI2C_CTRL_EN|OCI2C_CTRL_IEN)); + + /* + * I²C Frequency depends on host clock + * input clock of 100MHz + * prescale to 100MHz / ( 5*100kHz) -1 = 199 = 0x4F 100000/(5*100)-1=199=0xc7 + */ + printk(KERN_DEBUG "calculate prescale\n"); + prescale = (i2c->ip_clock_khz / (5 * i2c->bus_clock_khz)) - 1; + printk(KERN_DEBUG "calculate prescale = 0x%x\n",prescale); + prescale = clamp(prescale, 0, 0xffff); + printk(KERN_DEBUG "calculate clamp prescale = 0x%x\n",prescale); + + diff = i2c->ip_clock_khz / (5 * (prescale + 1)) - i2c->bus_clock_khz; + printk(KERN_DEBUG "calculate diff = 0x%x\n",diff); + if (abs(diff) > i2c->bus_clock_khz / 10) { + printk(KERN_ERR "Unsupported clock settings: core: %d KHz, bus: %d KHz\n", + i2c->ip_clock_khz, i2c->bus_clock_khz); + return -EINVAL; + } + + printk(KERN_DEBUG "OCI2C_PRELOW(%d) set = 0x%x\n",OCI2C_PRELOW,prescale & 0xff); + oc_setreg(i2c, OCI2C_PRELOW, prescale & 0xff); + printk(KERN_DEBUG "OCI2C_PRHIGH(%d) set = 0x%x\n",OCI2C_PREHIGH,prescale >> 8); + oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8); + + printk(KERN_DEBUG "Init the device\n"); + /* Init the device */ + oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK); + printk(KERN_DEBUG "OCI2C_CONTROL(0x%x) set: 0x%x\n", OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN); + if (!use_irq) + oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_EN); + else + oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_IEN | OCI2C_CTRL_EN); + + //ocores_dump(i2c); + + /* Initialize interrupt handlers if not already done */ + init_waitqueue_head(&i2c->wait); + + return 0; +} + + +static u32 ocores_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm ocores_algorithm = { + .master_xfer = ocores_xfer, + .functionality = ocores_func, +}; + +static int i2c_pci_add_bus (struct i2c_adapter *adap) +{ + int ret = 0; + /* Register new adapter */ + adap->algo = &ocores_algorithm; + ret = i2c_add_numbered_adapter(adap); + return ret; +} + +static int i2c_init_internal_data(void) +{ + int i; + printk(KERN_DEBUG "%s(), line:%d\n", __func__, __LINE__); + + for( i = 0; i < I2C_PCI_MAX_BUS; i++ ) + { + opencores_i2c[i].reg_shift = 0; /* 8 bit registers */ + opencores_i2c[i].reg_io_width = 1; /* 8 bit read/write */ + opencores_i2c[i].timeout = 1000;//1ms + opencores_i2c[i].ip_clock_khz = 100000;/* input clock of 100MHz */ + opencores_i2c[i].bus_clock_khz = 100; + //opencores_i2c[i].base = fpga_base_addr + OCORES_I2C_BASE + i*OCORES_CH_OFFSET; + opencores_i2c[i].base = fpga_base_addr + i*OCORES_CH_OFFSET; + mutex_init(&opencores_i2c[i].lock); + ocores_init(&opencores_i2c[i]); + } + +#if 0 + printk(KERN_DEBUG "FPGA PCIE access test\n"); + writel(0xdeadbeef, fpga_base_addr + 0x04); + printk(KERN_DEBUG "%s(), fpga_base_addr + 0x8000:0x%x\n", __func__, readl(fpga_base_addr + 0x8000)); + printk(KERN_DEBUG "%s(), SCRTCH_REG:0x%x\n", __func__, readl(fpga_base_addr + 0x04)); +#endif + return 0; +} + + +static int i2c_pci_init (void) +{ + int i; + + memset (&i2c_pci_adap, 0, sizeof(i2c_pci_adap)); + memset (&opencores_i2c, 0, sizeof(opencores_i2c)); + for(i=0; i < i2c_bus_controller_numb; i++) + mutex_init(&i2c_xfer_lock[i]); + + /* Initialize driver's itnernal data structures */ + i2c_init_internal_data(); + + for (i = 0 ; i < I2C_PCI_MAX_BUS ; i ++) { + + i2c_pci_adap[i].owner = THIS_MODULE; + i2c_pci_adap[i].class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + + i2c_pci_adap[i].algo_data = &opencores_i2c[i]; + /* /dev/i2c-600 ~ /dev/i2c-600 for Open core I2C channel controller 1-7 */ + i2c_pci_adap[i].nr = i+600; + sprintf( i2c_pci_adap[ i ].name, "i2c-pci-%d", i ); + /* Add the bus via the algorithm code */ + if( i2c_pci_add_bus( &i2c_pci_adap[ i ] ) != 0 ) + { + printk(KERN_ERR "Cannot add bus %d to algorithm layer\n", i ); + return( -ENODEV ); + } + i2c_set_adapdata(&i2c_pci_adap[i], &opencores_i2c[i]); + printk( KERN_DEBUG "Registered bus id: %s\n", kobject_name(&i2c_pci_adap[ i ].dev.kobj)); + } + + return 0; +} + +static void i2c_pci_deinit(void) +{ + int i; + for( i = 0; i < I2C_PCI_MAX_BUS; i++ ){ + i2c_del_adapter(&i2c_pci_adap[i]); + } + +} + +/* Find upstream PCIe root node. + * Used for re-training and disabling AER. */ +static struct pci_dev* find_upstream_dev (struct pci_dev *dev) +{ + struct pci_bus *bus = 0; + struct pci_dev *bridge = 0; + struct pci_dev *cur = 0; + int found_dev = 0; + + bus = dev->bus; + if (bus == 0) { + printk (KERN_DEBUG "Device doesn't have an associated bus!\n"); + return 0; + } + + bridge = bus->self; + if (bridge == 0) { + printk (KERN_DEBUG "Can't get the bridge for the bus!\n"); + return 0; + } + + printk (KERN_DEBUG "Upstream device %x/%x, bus:slot.func %02x:%02x.%02x\n", + bridge->vendor, bridge->device, + bridge->bus->number, PCI_SLOT(bridge->devfn), PCI_FUNC(bridge->devfn)); + + printk (KERN_DEBUG "List of downstream devices:"); + list_for_each_entry (cur, &bus->devices, bus_list) { + if (cur != 0) { + printk (KERN_DEBUG " %x/%x", cur->vendor, cur->device); + if (cur == dev) { + found_dev = 1; + } + } + } + printk (KERN_DEBUG "\n"); + if (found_dev) { + return bridge; + } else { + printk (KERN_DEBUG "Couldn't find upstream device!\n"); + return 0; + } +} + + +static int scan_bars(struct fpgapci_dev *fpgapci, struct pci_dev *dev) +{ + int i; + + for (i = 0; i < PCI_NUM_BARS; i++) { + unsigned long bar_start = pci_resource_start(dev, i); + if (bar_start) { + unsigned long bar_end = pci_resource_end(dev, i); + unsigned long bar_flags = pci_resource_flags(dev, i); + printk (KERN_DEBUG "BAR[%d] 0x%08lx-0x%08lx flags 0x%08lx", + i, bar_start, bar_end, bar_flags); + } + } + + return 0; +} + + +/** + * Map the device memory regions into kernel virtual address space + * after verifying their sizes respect the minimum sizes needed, given + * by the bar_min_len[] array. + */ +static int map_bars(struct fpgapci_dev *fpgapci, struct pci_dev *dev) +{ + int i; + + for (i = 0; i < PCI_NUM_BARS; i++){ + phys_addr_t bar_start = pci_resource_start(dev, i); + phys_addr_t bar_end = pci_resource_end(dev, i); + unsigned long bar_length = bar_end - bar_start + 1; + fpgapci->bar_length[i] = bar_length; + + + if (!bar_start || !bar_end) { + fpgapci->bar_length[i] = 0; + continue; + } + + if (bar_length < 1) { + printk ( "BAR #%d length is less than 1 byte\n", i); + continue; + } + + //printk ( "bar_start=%llx, bar_end=%llx, bar_length=%lx, flag=%lx\n", bar_start, + // bar_end, bar_length, pci_resource_flags(dev, i)); + + /* map the device memory or IO region into kernel virtual + * address space */ + fpgapci->bar[i] = ioremap_nocache (bar_start + OCORES_I2C_BASE, I2C_PCI_MAX_BUS * OCORES_CH_OFFSET); + if (!fpgapci->bar[i]) { + printk ( "Could not map BAR #%d.\n", i); + return -1; + } + + //printk ( "BAR[%d] mapped at 0x%p with length %lu.", i, + // fpgapci->bar[i], bar_length); + + if(i == 0) //FPGA register is in the BAR[0] + { + fpga_phys_addr = bar_start; + fpga_base_addr = fpgapci->bar[i]; + } + + printk (KERN_DEBUG "BAR[%d] mapped at 0x%p with length %lu.\n", i, + fpgapci->bar[i], bar_length); + } + return 0; +} + +static void free_bars(struct fpgapci_dev *fpgapci, struct pci_dev *dev) +{ + int i; + + for (i = 0; i < PCI_NUM_BARS; i++) { + if (fpgapci->bar[i]) { + pci_iounmap(dev, fpgapci->bar[i]); + fpgapci->bar[i] = NULL; + } + } +} + +#define FPGA_PCI_NAME "FPGA_PCI" + +/** + * @brief Register specific function with msi interrupt line + * @param dev Pointer to pci-device, which should be allocated + * @param int interrupt number relative to global interrupt number + * @return Returns error code or zero if success + * */ +static int register_intr_handler(struct pci_dev *dev, int c) +{ + int err = 0; + struct fpgapci_dev *fpgapci = 0; + + fpgapci = (struct fpgapci_dev*) dev_get_drvdata(&dev->dev); + if (fpgapci == 0) { + printk (KERN_ERR ": fpgapci_dev is 0\n"); + return err; + } + + + /* Request interrupt line for unique function + * alternatively function will be called from free_irq as well with flag IRQF_SHARED */ + switch(c) { + /*Currently we only support test vector 2 for Open core I2C channel controller 1-7 interrupt*/ + case 0: + err = request_irq(dev->irq + c, ocores_isr, IRQF_EARLY_RESUME, FPGA_PCI_NAME, &opencores_i2c[0]); + fpgapci->irq_assigned++; + printk(KERN_DEBUG "Interrupt Line %d assigned with return value %d\n", dev->irq + c, err); + break; + + default: + printk(KERN_DEBUG "No more interrupt handler for number (%d)\n", dev->irq + c); + break; + } + return err; +} +/* Mask for MSI Multi message enable bits */ +#define MSI_MME 0x70 +/** + * These enums define the type of interrupt scheme that the overall + * system uses. + */ +enum fpga_irq_type { + INT_MSI_SINGLE, + INT_MSI_MULTI, + INT_MSIX, + INT_NONE, + INT_FENCE /* Last item to guard from loop run-overs */ +}; +/** + * @def PCI_DEVICE_STATUS + * define the offset for STS register + * from the start of PCI config space as specified in the + * NVME_Comliance 1.0b. offset 06h:STS - Device status. + * This register has error status for NVME PCI Exress + * Card. After reading data from this reagister, the driver + * will identify if any error is set during the operation and + * report as kernel alert message. + */ +#define PCI_DEVICE_STATUS 0x6 +/** + * @def NEXT_MASK + * This indicates the location of the next capability item + * in the list. + */ +#define NEXT_MASK 0xFF00 +/** + * @def MSIXCAP_ID + * This bit indicates if the pointer leading to this position + * is a capability. + */ +#define MSIXCAP_ID 0x11 +/** + * @def MSICAP_ID + * This bit indicates if the pointer leading to this position + * is a capability. + */ +#define MSICAP_ID 0x5 + +/** + * @def CL_MASK + * This bit position indicates Capabilities List of the controller + * The controller should support the PCI Power Management cap as a + * minimum. + */ +#define CL_MASK 0x0010 + +/** + * @def CAP_REG + * Set to offset defined in NVME Spec 1.0b. + */ +#define CAP_REG 0x34 +static void msi_set_enable(struct pci_dev *dev, int enable) +{ + int pos,maxvec; + u16 control; + int request_private_bits = 4; + + pos = pci_find_capability(dev, PCI_CAP_ID_MSI); + printk(KERN_DEBUG "pos = 0x%x\n", pos); + if (pos) { + pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); + maxvec = 1 << ((control & PCI_MSI_FLAGS_QMASK) >> 1); + printk(KERN_DEBUG "control = 0x%x maxvec = 0x%x\n", control, maxvec); + control &= ~PCI_MSI_FLAGS_ENABLE; +#if 0 + if (enable) + control |= PCI_MSI_FLAGS_ENABLE; +#else + /* + * The PCI 2.3 spec mandates that there are at most 32 + * interrupts. If this device asks for more, only give it one. + */ + if (request_private_bits > 5) { + request_private_bits = 0; + } + + /* Update the number of IRQs the device has available to it */ + control &= ~PCI_MSI_FLAGS_QSIZE; + control |= (request_private_bits << 4); +#endif + + pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); + } +} +static void msi_setup_enable(struct pci_dev *dev, int request_private_bits) +{ + int pos,maxvec; + u16 control; + int configured_private_bits = 4; + + pos = pci_find_capability(dev, PCI_CAP_ID_MSI); + + /* + * Read the MSI config to figure out how many IRQs this device + * wants. Most devices only want 1, which will give + * configured_private_bits and request_private_bits equal 0. + */ + pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control); + + /* + * If the number of private bits has been configured then use + * that value instead of the requested number. This gives the + * driver the chance to override the number of interrupts + * before calling pci_enable_msi(). + */ + configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; + if (configured_private_bits == 0) { + /* Nothing is configured, so use the hardware requested size */ + request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; + } + else { + /* + * Use the number of configured bits, assuming the + * driver wanted to override the hardware request + * value. + */ + request_private_bits = configured_private_bits; + } + + /* + * The PCI 2.3 spec mandates that there are at most 32 + * interrupts. If this device asks for more, only give it one. + */ + if (request_private_bits > 5) { + request_private_bits = 0; + } + + /* Update the number of IRQs the device has available to it */ + control &= ~PCI_MSI_FLAGS_QSIZE; + control |= (request_private_bits << 4); + pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control); +} +/** + * @brief Enables pcie-device and claims/remaps neccessary bar resources + * @param dev Pointer to pci-device, which should be allocated + * @return Returns error code or zero if success + * */ +static int claim_device(struct fpgapci_dev *fpgapci,struct pci_dev *dev) +{ + int err = 0; + u16 msi_offset; + u16 mc_val; + + /* wake up the pci device */ + err = pci_enable_device(dev); + if(err) { + printk(KERN_ERR "failed to enable pci device %d\n", err); + goto error_pci_en; + } + + /* on platforms with buggy ACPI, pdev->msi_enabled may be set to + * allow pci_enable_device to work. This indicates INTx was not routed + * and only MSI should be used + */ + + //dev->msi_enabled = 0; + pci_set_master(dev); + + /* Setup the BAR memory regions */ + err = pci_request_regions(dev, DRIVER_NAME); + if (err) { + printk(KERN_ERR "failed to enable pci device %d\n", err); + goto error_pci_req; + } + + scan_bars(fpgapci, dev); + + if (map_bars(fpgapci, dev)) { + goto fail_map_bars; + } + + i2c_pci_init(); + + return 0; + /* ERROR HANDLING */ +fail_map_bars: + pci_release_regions(dev); +error_pci_req: + pci_disable_device(dev); +error_pci_en: + return -ENODEV; +} +/** + * @brief Configures pcie-device and bit_mask settings + * @param dev Pointer to pci-device, which should be allocated + * @return Returns error code or zero if success + * */ +static int configure_device(struct pci_dev *dev) +{ + return 0; +} + + +/* + * Check if the controller supports the interrupt type requested. If it + * supports returns the offset, otherwise it will return invalid for the + * caller to indicate that the controller does not support the capability + * type. + */ +int check_cntlr_cap(struct pci_dev *dev, enum fpga_irq_type cap_type, + u16 *offset) +{ + u16 val = 0; + u16 pci_offset = 0; + int ret_val = -EINVAL; + + if (pci_read_config_word(dev, PCI_DEVICE_STATUS, &val) < 0) { + printk(KERN_ERR "pci_read_config failed...\n"); + return -EINVAL; + } + printk(KERN_DEBUG "PCI_DEVICE_STATUS = 0x%X\n", val); + if (!(val & CL_MASK)) { + printk(KERN_ERR "Controller does not support Capability list...\n"); + return -EINVAL; + } else { + if (pci_read_config_word(dev, CAP_REG, &pci_offset) < 0) { + printk(KERN_ERR "pci_read_config failed...\n"); + return -EINVAL; + } + } + printk(KERN_DEBUG "pci_offset = 0x%x\n", pci_offset); + /* Interrupt Type MSI-X*/ + if (cap_type == INT_MSIX) { + /* Loop through Capability list */ + while (pci_offset) {//0x40 + if (pci_read_config_word(dev, pci_offset, &val) < 0) { + printk(KERN_ERR "pci_read_config failed...\n"); + return -EINVAL; + } + /* exit when we find MSIX_capbility offset */ + if ((val & ~NEXT_MASK) == MSIXCAP_ID) { + /* write msix cap offset */ + *offset = pci_offset; + ret_val = 1; + /* break from while loop */ + break; + } + /* Next Capability offset. */ + pci_offset = (val & NEXT_MASK) >> 8; + } /* end of while loop */ + + } else if (cap_type == INT_MSI_SINGLE || cap_type == INT_MSI_MULTI) { + /* Loop through Capability list */ + while (pci_offset) {//0x40 + if (pci_read_config_word(dev, pci_offset, &val) < 0) { + printk(KERN_ERR "pci_read_config failed...\n"); + return -EINVAL; + } + printk(KERN_DEBUG "val = 0x%x ~NEXT_MASK= 0x%x val & ~NEXT_MASK = 0x%x\n", val,~NEXT_MASK, val & ~NEXT_MASK); + /* exit when we find MSIX_capbility offset */ + if ((val & ~NEXT_MASK) == MSICAP_ID) { + /* write the msi offset */ + *offset = pci_offset; + ret_val = 1; + printk(KERN_DEBUG "*offset = 0x%x\n", *offset); + /* break from while loop */ + break; + } + /* Next Capability offset. */ + pci_offset = (val & NEXT_MASK) >> 8; + printk(KERN_DEBUG "Next Capability offset pci_offset = 0x%x\n", pci_offset); + } /* end of while loop */ + + } else { + printk(KERN_DEBUG "Invalid capability type specified...\n"); + ret_val = -EINVAL; + } + + return ret_val; +} + +static int claim_msi(struct fpgapci_dev *fpgapci,struct pci_dev *dev) +{ + int err = 0, i; + int nvec, request_vec; + u16 msi_offset; + u16 mc_val; + + /* set up MSI interrupt vector to max size */ + nvec = pci_msi_vec_count(dev); + printk(KERN_DEBUG "Have %d MSI vectors\n", nvec); +#if 0 +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 16, 0))// || defined(WITH_BACKPORTS) + err = pci_enable_msi_range(dev, nvec, nvec); +#else + err = pci_enable_msi_block(dev, nvec + 1); +#endif +#endif + printk(KERN_DEBUG "Check MSI capability\n"); + /* Check if the card Supports MSI capability */ + if (check_cntlr_cap(dev, INT_MSI_MULTI, &msi_offset) < 0) { + printk(KERN_ERR "Controller does not support for MSI capability!!\n"); + return -EINVAL; + } + /* compute MSI MC offset if MSI is supported */ + printk(KERN_DEBUG "check_cntlr_cap return msi_offset = 0x%x\n", msi_offset); + msi_offset += 2; + printk(KERN_DEBUG "msi_offset = 0x%x\n", msi_offset); + /* Read MSI-MC value */ + pci_read_config_word(dev, msi_offset, &mc_val); + printk(KERN_DEBUG "read msi_offset(0x%x) mc_val = 0x%x\n", msi_offset, mc_val); + printk(KERN_DEBUG "(1 << ((mc_val & MSI_MME) >> 4)) = 0x%x\n",(1 << ((mc_val & MSI_MME) >> 4))); + if (nvec > (1 << ((mc_val & MSI_MME) >> 4))) { // power 2 + printk(KERN_DEBUG "IRQs = %d exceed MSI MME = %d\n", nvec, + (1 << ((mc_val & MSI_MME) >> 4))); + /* does not support the requested irq's*/ + } + msi_set_enable(dev,1); + printk(KERN_DEBUG "Check MSI capability after msi_set_enable\n"); + + /* Check if the card Supports MSI capability */ + if (check_cntlr_cap(dev, INT_MSI_MULTI, &msi_offset) < 0) { + printk(KERN_DEBUG "Controller does not support for MSI capability!!\n"); + return -EINVAL; + } + /* compute MSI MC offset if MSI is supported */ + printk(KERN_DEBUG "check_cntlr_cap return msi_offset = 0x%x\n", msi_offset); + msi_offset += 2; + printk(KERN_DEBUG "msi_offset = 0x%x\n", msi_offset); + /* Read MSI-MC value */ + pci_read_config_word(dev, msi_offset, &mc_val); + printk(KERN_DEBUG "read msi_offset(0x%x) mc_val = 0x%x\n", msi_offset, mc_val); + + printk(KERN_DEBUG "(1 << ((mc_val & MSI_MME) >> 4)) = 0x%x\n",(1 << ((mc_val & MSI_MME) >> 4))); + if (nvec > (1 << ((mc_val & MSI_MME) >> 4))) { // power 2 + printk(KERN_DEBUG "IRQs = %d exceed MSI MME = %d\n", nvec, + (1 << ((mc_val & MSI_MME) >> 4))); + /* does not support the requested irq's*/ + } + + /*Above 4.1.12*/ +#if 1 + request_vec = 1; + err = pci_alloc_irq_vectors(dev, request_vec, pci_msi_vec_count(dev), + PCI_IRQ_MSI);//PCI_IRQ_AFFINITY | PCI_IRQ_MSI); +#endif + + if (err <= 0) { + printk(KERN_ERR "Cannot set MSI vector (%d)\n", err); + goto error_no_msi; + } else { + printk(KERN_ERR "Got %d MSI vectors starting at %d\n", err, dev->irq); + } + fpgapci->irq_first = dev->irq; + fpgapci->irq_length = err; + fpgapci->irq_assigned = 0; + + + for(i = 0; i < fpgapci->irq_length; i++) { + err = register_intr_handler(dev, i); + if (err) { + printk(KERN_ERR "Cannot request Interrupt number %d\n", i); + goto error_pci_req_irq; + } + } + + return 0; + +error_pci_req_irq: + //for(i = i-1; i >= 0; i--) + free_irq(fpgapci->irq_first + 0, &opencores_i2c[0]); + pci_disable_msi(fpgapci->pci_dev); +error_no_msi: + return -ENOSPC; +} + +static int fpgapci_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct fpgapci_dev *fpgapci = 0; + + printk (KERN_DEBUG " vendor = 0x%x, device = 0x%x, class = 0x%x, bus:slot.func = %02x:%02x.%02x\n", + dev->vendor, dev->device, dev->class, + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + + fpgapci = kzalloc(sizeof(struct fpgapci_dev), GFP_KERNEL); + + if (!fpgapci) { + printk(KERN_ERR "Couldn't allocate memory!\n"); + goto fail_kzalloc; + } + + fpgapci->pci_dev = dev; + dev_set_drvdata(&dev->dev, (void*)fpgapci); + + fpgapci->upstream = find_upstream_dev (dev); + + if(claim_device(fpgapci,dev)) { + goto error_no_device; + } + + if(configure_device(dev)) { + goto error_cannot_configure; + } + if (use_irq) { + if(claim_msi(fpgapci,dev)) { + goto error_cannot_configure; + } + } + + + return 0; + /* ERROR HANDLING */ +error_cannot_configure: + printk(KERN_ERR "error_cannot_configure\n"); + free_bars (fpgapci, dev); + pci_release_regions(dev); + pci_disable_device(dev); +error_no_device: + i2c_pci_deinit(); + printk(KERN_ERR "error_no_device\n"); +fail_kzalloc: + return -1; +} + +static void fpgapci_remove(struct pci_dev *dev) +{ + struct fpgapci_dev *fpgapci = 0; + //int i; + printk (KERN_DEBUG ": dev is %p\n", dev); + + if (dev == 0) { + printk (KERN_ERR ": dev is 0\n"); + return; + } + + fpgapci = (struct fpgapci_dev*) dev_get_drvdata(&dev->dev); + if (fpgapci == 0) { + printk (KERN_ERR ": fpgapci_dev is 0\n"); + return; + } + i2c_pci_deinit(); + if (use_irq) + free_irq(fpgapci->irq_first + 0, &opencores_i2c[0]); + pci_disable_msi(fpgapci->pci_dev); + free_bars (fpgapci, dev); + pci_disable_device(dev); + pci_release_regions(dev); + + kfree (fpgapci); +} + +static const struct pci_device_id fpgapci_ids[] = { + {PCI_DEVICE(PCI_VENDOR_ID_XILINX, DEVICE)}, + {0, }, +}; + +MODULE_DEVICE_TABLE(pci, fpgapci_ids); + +static struct pci_driver fpgapci_driver = { + .name = DRIVER_NAME, + .id_table = fpgapci_ids, + .probe = fpgapci_probe, + .remove = fpgapci_remove, + /* resume, suspend are optional */ +}; + +/* Initialize the driver module (but not any device) and register + * the module with the kernel PCI subsystem. */ +static int __init fpgapci_init(void) +{ + + if (pci_register_driver(&fpgapci_driver)) { + printk(KERN_DEBUG "pci_unregister_driver\n"); + pci_unregister_driver(&fpgapci_driver); + return -ENODEV; + } + + return 0; +} + +static void __exit fpgapci_exit(void) +{ + printk (KERN_DEBUG "fpgapci_exit"); + /* unregister this driver from the PCI bus driver */ + pci_unregister_driver(&fpgapci_driver); + +} + + +module_init (fpgapci_init); +module_exit (fpgapci_exit); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Joyce_Yu@Dell.com"); +MODULE_DESCRIPTION ("Driver for FPGA Opencores I2C bus"); +MODULE_SUPPORTED_DEVICE ("FPGA Opencores I2C bus"); + + diff --git a/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/check_qsfp.sh b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/check_qsfp.sh new file mode 100755 index 000000000000..7e7f1636a186 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/check_qsfp.sh @@ -0,0 +1,3 @@ +# Temporary dummy file for z9264f. +# Will be updated soon. + diff --git a/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/pcisysfs.py b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/pcisysfs.py new file mode 100755 index 000000000000..047618e057c8 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/pcisysfs.py @@ -0,0 +1,102 @@ +#!/usr/bin/python +# Copyright (c) 2015 Dell Inc. +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may +# not use this file except in compliance with the License. You may obtain +# a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 +# +# THIS CODE IS PROVIDED ON AN *AS IS* BASIS, WITHOUT WARRANTIES OR +# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT +# LIMITATION ANY IMPLIED WARRANTIES OR CONDITIONS OF TITLE, FITNESS +# FOR A PARTICULAR PURPOSE, MERCHANTABLITY OR NON-INFRINGEMENT. +# +# See the Apache Version 2.0 License for specific language governing +# permissions and limitations under the License. + +import struct +import sys +import getopt +from os import * +from mmap import * + +def usage(): + ''' This is the Usage Method ''' + + print '\t\t pcisysfs.py --get --offset --res ' + print '\t\t pcisysfs.py --set --val --offset --res ' + sys.exit(1) + +def pci_mem_read(mm,offset): + mm.seek(offset) + read_data_stream=mm.read(4) + print "" + reg_val=struct.unpack('I',read_data_stream) + print "reg_val read:%x"%reg_val + return reg_val + +def pci_mem_write(mm,offset,data): + mm.seek(offset) + print "data to write:%x"%data + mm.write(struct.pack('I',data)) + +def pci_set_value(resource,val,offset): + fd=open(resource,O_RDWR) + mm=mmap(fd,0) + pci_mem_write(mm,offset,val) + +def pci_get_value(resource,offset): + fd=open(resource,O_RDWR) + mm=mmap(fd,0) + pci_mem_read(mm,offset) + +def main(argv): + + ''' The main function will read the user input from the + command line argument and process the request ''' + + opts = '' + val = '' + choice = '' + resource = '' + offset = '' + + try: + opts, args = getopt.getopt(argv, "hgsv:" , \ + ["val=","res=","offset=","help", "get", "set"]) + + except getopt.GetoptError: + usage() + + for opt,arg in opts: + + if opt in ('-h','--help'): + choice = 'help' + + elif opt in ('-g', '--get'): + choice = 'get' + + elif opt in ('-s', '--set'): + choice = 'set' + + elif opt == '--res': + resource = arg + + elif opt == '--val': + val = int(arg,16) + + elif opt == '--offset': + offset = int(arg,16) + + if choice == 'set' and val != '' and offset !='' and resource !='': + pci_set_value(resource,val,offset) + + elif choice == 'get' and offset != '' and resource !='': + pci_get_value(resource,offset) + + else: + usage() + +#Calling the main method +if __name__ == "__main__": + main(sys.argv[1:]) + diff --git a/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/platform_sensors.py b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/platform_sensors.py new file mode 100755 index 000000000000..c16aee1d4b8c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/platform_sensors.py @@ -0,0 +1,251 @@ +#!/usr/bin/python +# On Z9264f, the BaseBoard Management Controller is an +# autonomous subsystem provides monitoring and management +# facility independent of the host CPU. IPMI standard +# protocol is used with ipmitool to fetch sensor details. +# Current script support X00 board only. X01 support will +# be added soon. This provies support for the +# following objects: +# * Onboard temperature sensors +# * FAN trays +# * PSU + + +import os +import sys +import logging +import subprocess +import commands + +Z9264F_MAX_FAN_TRAYS = 4 +Z9264F_MAX_PSUS = 2 +IPMI_SENSOR_DATA = "ipmitool sdr list" +IPMI_SENSOR_DUMP = "/tmp/sdr" + +FAN_PRESENCE = "FAN{0}_prsnt" +PSU_PRESENCE = "PSU{0}_state" +# Use this for older firmware +# PSU_PRESENCE="PSU{0}_prsnt" + +ipmi_sdr_list = "" + +# Dump sensor registers + + +def ipmi_sensor_dump(): + + status = 1 + global ipmi_sdr_list + ipmi_cmd = IPMI_SENSOR_DATA + status, ipmi_sdr_list = commands.getstatusoutput(ipmi_cmd) + + if status: + logging.error('Failed to execute:' + ipmi_sdr_list) + sys.exit(0) + +# Fetch a BMC register + + +def get_pmc_register(reg_name): + + for item in ipmi_sdr_list.split("\n"): + if reg_name in item: + output = item.strip() + + if not output: + print('\nFailed to fetch: ' + reg_name + ' sensor ') + sys.exit(0) + + output = output.split('|')[1] + + logging.basicConfig(level=logging.DEBUG) + return output + + +# Print the information for temperature sensors + + +def print_temperature_sensors(): + + print("\nOnboard Temperature Sensors:") + + print ' PT_Left_temp: ',\ + (get_pmc_register('PT_Left_temp')) + print ' PT_Mid_temp: ',\ + (get_pmc_register('PT_Mid_temp')) + print ' PT_Right_temp: ',\ + (get_pmc_register('PT_Right_temp')) + print ' Broadcom Temp: ',\ + (get_pmc_register('TC_Near_temp')) + print ' Inlet Airflow Temp: ',\ + (get_pmc_register('ILET_AF_temp')) + print ' CPU Temp: ',\ + (get_pmc_register('CPU_Near_temp')) + print ' CPU Near Temp: ',\ + (get_pmc_register('CPU_temp')) + print ' DRAM Temp: ',\ + (get_pmc_register('DRAM1_temp')) + +ipmi_sensor_dump() + +print_temperature_sensors() + +# Print the information for 1 Fan Tray + + +def print_fan_tray(tray): + + Fan_Status = [' Normal', ' Abnormal'] + Airflow_Direction = ['B2F', 'F2B'] + + print ' Fan Tray ' + str(tray) + ':' + + if (tray == 1): + + fan1_status = int(get_pmc_register('Fan1_Front_state'), 16) + fan2_status = int(get_pmc_register('Fan1_Rear_state'), 16) + + print ' Fan1 Speed: ',\ + get_pmc_register('FAN1_Front_rpm') + print ' Fan2 Speed: ',\ + get_pmc_register('FAN1_Rear_rpm') + print ' Fan1 State: ',\ + Fan_Status[fan1_status] + print ' Fan2 State: ',\ + Fan_Status[fan2_status] + + elif (tray == 2): + + fan1_status = int(get_pmc_register('Fan2_Front_state'), 16) + fan2_status = int(get_pmc_register('Fan2_Rear_state'), 16) + + print ' Fan1 Speed: ',\ + get_pmc_register('FAN2_Front_rpm') + print ' Fan2 Speed: ',\ + get_pmc_register('FAN2_Rear_rpm') + print ' Fan1 State: ',\ + Fan_Status[fan1_status] + print ' Fan2 State: ',\ + Fan_Status[fan2_status] + + elif (tray == 3): + + fan1_status = int(get_pmc_register('Fan3_Front_state'), 16) + fan2_status = int(get_pmc_register('Fan3_Rear_state'), 16) + + print ' Fan1 Speed: ',\ + get_pmc_register('FAN3_Front_rpm') + print ' Fan2 Speed: ',\ + get_pmc_register('FAN3_Rear_rpm') + print ' Fan1 State: ',\ + Fan_Status[fan1_status] + print ' Fan2 State: ',\ + Fan_Status[fan2_status] + + elif (tray == 4): + + fan1_status = int(get_pmc_register('Fan4_Front_state'), 16) + fan2_status = int(get_pmc_register('Fan4_Rear_state'), 16) + + print ' Fan1 Speed: ',\ + get_pmc_register('FAN4_Front_rpm') + print ' Fan2 Speed: ',\ + get_pmc_register('FAN4_Rear_rpm') + print ' Fan1 State: ',\ + Fan_Status[fan1_status] + print ' Fan2 State: ',\ + Fan_Status[fan2_status] + + +print('\nFan Trays:') + +for tray in range(1, Z9264F_MAX_FAN_TRAYS + 1): + fan_presence = FAN_PRESENCE.format(tray) + if (get_pmc_register(fan_presence)): + print_fan_tray(tray) + else: + print '\n Fan Tray ' + str(tray + 1) + ': Not present' + + +# Print the information for PSU1, PSU2 +def print_psu(psu): + Psu_Type = ['Normal', 'Mismatch'] + Psu_Input_Type = ['AC', 'DC'] + PSU_STATUS_TYPE_BIT = 4 + PSU_STATUS_INPUT_TYPE_BIT = 1 + PSU_FAN_PRESENT_BIT = 2 + PSU_FAN_STATUS_BIT = 1 + PSU_FAN_AIR_FLOW_BIT = 0 + Psu_Fan_Presence = ['Present', 'Absent'] + Psu_Fan_Status = ['Normal', 'Abnormal'] + Psu_Fan_Airflow = ['B2F', 'F2B'] + + # print ' Input: ', Psu_Input_Type[psu_input_type] + # print ' Type: ', Psu_Type[psu_type] + + # PSU FAN details + if (psu == 1): + + # psu1_fan_status = int(get_pmc_register('PSU1_status'),16) + + print ' PSU1:' + print ' FAN Temperature: ',\ + get_pmc_register('PSU1_temp') + print ' FAN AirFlow Temperature: ',\ + get_pmc_register('PSU1_AF_temp') + print ' FAN RPM: ',\ + get_pmc_register('PSU1_rpm') + # print ' FAN Status: ', Psu_Fan_Status[psu1_fan_status] + + # PSU input & output monitors + print ' Input Voltage: ',\ + get_pmc_register('PSU1_In_volt') + print ' Output Voltage: ',\ + get_pmc_register('PSU1_Out_volt') + print ' Input Power: ',\ + get_pmc_register('PSU1_In_watt') + print ' Output Power: ',\ + get_pmc_register('PSU1_Out_watt') + print ' Input Current: ',\ + get_pmc_register('PSU1_In_amp') + print ' Output Current: ',\ + get_pmc_register('PSU1_Out_amp') + + else: + + # psu2_fan_status = int(get_pmc_register('PSU1_status'),16) + print ' PSU2:' + print ' FAN Temperature: ',\ + get_pmc_register('PSU2_temp') + print ' FAN AirFlow Temperature: ',\ + get_pmc_register('PSU2_AF_temp') + print ' FAN RPM: ',\ + get_pmc_register('PSU2_rpm') + # print ' FAN Status: ', Psu_Fan_Status[psu2_fan_status] + + # PSU input & output monitors + print ' Input Voltage: ',\ + get_pmc_register('PSU2_In_volt') + print ' Output Voltage: ',\ + get_pmc_register('PSU2_Out_volt') + print ' Input Power: ',\ + get_pmc_register('PSU2_In_watt') + print ' Output Power: ',\ + get_pmc_register('PSU2_Out_watt') + print ' Input Current: ',\ + get_pmc_register('PSU2_In_amp') + print ' Output Current: ',\ + get_pmc_register('PSU2_Out_amp') + + +print('\nPSUs:') +for psu in range(1, Z9264F_MAX_PSUS + 1): + psu_presence = PSU_PRESENCE.format(psu) + if (get_pmc_register(psu_presence)): + print_psu(psu) + else: + print '\n PSU ', psu, 'Not present' + +print '\n Total Power: ',\ + get_pmc_register('PSU_Total_watt') + diff --git a/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/sensors b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/sensors new file mode 100755 index 000000000000..ee53f2b0f325 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/sensors @@ -0,0 +1,8 @@ +#!/bin/bash +docker exec -i pmon sensors "$@" +docker exec -i pmon /usr/bin/platform_sensors.py "$@" + +#To probe sensors not part of lm-sensors +#if [ -r /usr/local/bin/platform_sensors.py ]; then +# python /usr/local/bin/platform_sensors.py +#fi diff --git a/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/z9264f_platform.sh b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/z9264f_platform.sh new file mode 100755 index 000000000000..a899a53a9ffb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/z9264f_platform.sh @@ -0,0 +1,125 @@ +#!/bin/bash + +init_devnum() { + found=0 + for devnum in 0 1; do + devname=`cat /sys/bus/i2c/devices/i2c-${devnum}/name` + # iSMT adapter can be at either dffd0000 or dfff0000 + if [[ $devname == 'SMBus iSMT adapter at '* ]]; then + found=1 + break + fi + done + + [ $found -eq 0 ] && echo "cannot find iSMT" && exit 1 +} + +# Attach/Detach syseeprom on CPU board +sys_eeprom() { + case $1 in + "new_device") echo 24c02 0x53 > /sys/bus/i2c/devices/i2c-0/$1 + ;; + "delete_device") echo 0x53 > /sys/bus/i2c/devices/i2c-0/$1 + ;; + *) echo "z9264f_platform: sys_eeprom : invalid command !" + ;; + esac +} + +#Attach/Detach the MUX connecting all QSFPs +switch_board_qsfp_mux() { + case $1 in + "new_device") + for ((i=74;i<=77;i++)); + do + echo "Attaching PCA9548 @ $i" + echo pca9548 0x$i > /sys/bus/i2c/devices/i2c-604/$1 + sleep 2 + done + + for ((i=74;i<=77;i++)); + do + echo "Attaching PCA9548 @ $i" + echo pca9548 0x$i > /sys/bus/i2c/devices/i2c-603/$1 + sleep 2 + done + ;; + "delete_device") + for ((i=74;i<=77;i++)); + do + echo "Detaching PCA9548 @ $i" + echo 0x$i > /sys/bus/i2c/devices/i2c-604/$1 + sleep 2 + done + + for ((i=74;i<=77;i++)); + do + echo "Detaching PCA9548 @ $i" + echo 0x$i > /sys/bus/i2c/devices/i2c-603/$1 + sleep 2 + done + ;; + *) echo "z9264f_platform: switch_board_qsfp_mux: invalid command !" + ;; + esac + sleep 2 +} + +#Attach/Detach 64 instances of EEPROM driver QSFP ports +#eeprom can dump data using below command +switch_board_qsfp() { + case $1 in + "new_device") + for ((i=2;i<=65;i++)); + do + echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-$i/$1 + done + ;; + + "delete_device") + for ((i=2;i<=65;i++)); + do + echo 0x50 > /sys/bus/i2c/devices/i2c-$i/$1 + done + ;; + + *) echo "z9264f_platform: switch_board_qsfp: invalid command !" + ;; + esac +} + +#Modsel 64 ports to applicable QSFP type modules +#This enables the adapter to respond for i2c commands +switch_board_modsel() { + resource="/sys/bus/pci/devices/0000:04:00.0/resource0" + for ((i=1;i<=64;i++)); + do + port_addr=$( 16384 + ((i - 1) * 16)) + hex=$( printf "0x%x" $port_addr ) + python /bin/pcisysfs.py --set --offset $hex --val 0x41 --res $resource > /dev/null 2>&1 + done +} +init_devnum + +if [ "$1" == "init" ]; then + depmod -a + modprobe i2c-dev + modprobe i2c-mux-pca954x force_deselect_on_exit=1 + modprobe i2c_ocores + modprobe dell_z9264f_fpga_ocores + sys_eeprom "new_device" + switch_board_qsfp_mux "new_device" + switch_board_qsfp "new_device" + switch_board_modsel + +elif [ "$1" == "deinit" ]; then + sys_eeprom "delete_device" + switch_board_qsfp "delete_device" + switch_board_qsfp_mux "delete_device" + + modprobe -r i2c-mux-pca954x + modprobe -r i2c-dev +else + echo "z9264f_platform : Invalid option !" +fi + diff --git a/platform/broadcom/sonic-platform-modules-s6000 b/platform/broadcom/sonic-platform-modules-s6000 deleted file mode 160000 index 6c4da534410c..000000000000 --- a/platform/broadcom/sonic-platform-modules-s6000 +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 6c4da534410c037892ad0338d1c930b5b9b1493b diff --git a/platform/broadcom/sonic-platform-modules-s6000/.gitignore b/platform/broadcom/sonic-platform-modules-s6000/.gitignore new file mode 100644 index 000000000000..7f287d538227 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/.gitignore @@ -0,0 +1,50 @@ +# Object files +*.o +*.ko +*.obj +*.elf + +# Precompiled Headers +*.gch +*.pch + +# Libraries +*.lib +*.a +*.la +*.lo + +# Shared objects (inc. Windows DLLs) +*.dll +*.so +*.so.* +*.dylib + +# Executables +*.exe +*.out +*.app +*.i*86 +*.x86_64 +*.hex + +# Debug files +*.dSYM/ +*.su + +# Kernel Module Compile Results +*.mod* +*.cmd +*.o.d +.tmp_versions/ +modules.order +Module.symvers +Mkfile.old +dkms.conf + +# Debian packaging +*.debhelper.log +*.postinst.debhelper +*.postrm.debhelper +*.prerm.debhelper +*.substvars diff --git a/platform/broadcom/sonic-platform-modules-s6000/LICENSE b/platform/broadcom/sonic-platform-modules-s6000/LICENSE new file mode 100644 index 000000000000..676cdeec726b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/LICENSE @@ -0,0 +1,15 @@ +Copyright (C) 2016 Microsoft, Inc + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/broadcom/sonic-platform-modules-s6000/MAINTAINERS b/platform/broadcom/sonic-platform-modules-s6000/MAINTAINERS new file mode 100644 index 000000000000..65e3129fcc13 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/MAINTAINERS @@ -0,0 +1,7 @@ +# This file describes the maintainers for sonic-platform-modules-s6000 +# See the SONiC project governance document for more information + +Name = "Shuotian Cheng" +Email = "shuche@microsoft.com" +Github = stcheng +Mailinglist = sonicproject@googlegroups.com diff --git a/platform/broadcom/sonic-platform-modules-s6000/README.md b/platform/broadcom/sonic-platform-modules-s6000/README.md new file mode 100644 index 000000000000..7913d168a30a --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/README.md @@ -0,0 +1,2 @@ +# sonic-platform-modules-s6000 +Device drivers for support of Dell S6000 for the SONiC project diff --git a/platform/broadcom/sonic-platform-modules-s6000/debian/changelog b/platform/broadcom/sonic-platform-modules-s6000/debian/changelog new file mode 100644 index 000000000000..0a6b7820bdeb --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/debian/changelog @@ -0,0 +1,5 @@ +platform-modules-s6000 (1.0) unstable; urgency=low + + * Initial release + + -- Shuotian Cheng Mon, 11 Nov 2015 11:11:11 -0800 diff --git a/platform/broadcom/sonic-platform-modules-s6000/debian/compat b/platform/broadcom/sonic-platform-modules-s6000/debian/compat new file mode 100644 index 000000000000..45a4fb75db86 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/debian/compat @@ -0,0 +1 @@ +8 diff --git a/platform/broadcom/sonic-platform-modules-s6000/debian/control b/platform/broadcom/sonic-platform-modules-s6000/debian/control new file mode 100644 index 000000000000..fbd8529de4e8 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/debian/control @@ -0,0 +1,12 @@ +Source: platform-modules-s6000 +Section: main +Priority: extra +Maintainer: Shuotian Cheng +Build-Depends: debhelper (>= 8.0.0), bzip2 +Standards-Version: 3.9.3 + +Package: platform-modules-s6000 +Architecture: amd64 +Depends: linux-image-4.9.0-5-amd64 +Description: kernel modules for platform devices such as fan, led, sfp + diff --git a/platform/broadcom/sonic-platform-modules-s6000/debian/copyright b/platform/broadcom/sonic-platform-modules-s6000/debian/copyright new file mode 100644 index 000000000000..6fbc5a7f6ca0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/debian/copyright @@ -0,0 +1,16 @@ +Provides linux sysfs interface to Dell S6000 platform hardware peripherals +Copyright (C) 2016 Microsoft + +This program is free software; you can redistribute it and/or +modify it under the terms of the GNU General Public License +as published by the Free Software Foundation; either version 2 +of the License, or (at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. diff --git a/platform/broadcom/sonic-platform-modules-s6000/debian/platform-modules-s6000.init b/platform/broadcom/sonic-platform-modules-s6000/debian/platform-modules-s6000.init new file mode 100755 index 000000000000..f16f7e01ef6e --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/debian/platform-modules-s6000.init @@ -0,0 +1,99 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup S6000 board. +### END INIT INFO + +add_i2c_devices() { + + echo 24c02 0x50 > /sys/class/i2c-adapter/i2c-1/new_device + echo 24c02 0x51 > /sys/class/i2c-adapter/i2c-1/new_device + echo dni_dps460 0x58 > /sys/class/i2c-adapter/i2c-1/new_device + echo dni_dps460 0x59 > /sys/class/i2c-adapter/i2c-1/new_device + echo jc42 0x18 > /sys/class/i2c-adapter/i2c-10/new_device + echo emc1403 0x4d > /sys/class/i2c-adapter/i2c-10/new_device + echo spd 0x50 > /sys/class/i2c-adapter/i2c-10/new_device + echo 24c02 0x53 > /sys/class/i2c-adapter/i2c-10/new_device + echo max6620 0x29 > /sys/class/i2c-adapter/i2c-11/new_device + echo max6620 0x2a > /sys/class/i2c-adapter/i2c-11/new_device + echo ltc4215 0x40 > /sys/class/i2c-adapter/i2c-11/new_device + echo ltc4215 0x42 > /sys/class/i2c-adapter/i2c-11/new_device + echo tmp75 0x4c > /sys/class/i2c-adapter/i2c-11/new_device + echo tmp75 0x4d > /sys/class/i2c-adapter/i2c-11/new_device + echo tmp75 0x4e > /sys/class/i2c-adapter/i2c-11/new_device + echo 24c02 0x51 > /sys/class/i2c-adapter/i2c-11/new_device + echo 24c02 0x52 > /sys/class/i2c-adapter/i2c-11/new_device + echo 24c02 0x53 > /sys/class/i2c-adapter/i2c-11/new_device + for i in `seq 0 31`; do + echo sff8436 0x50 > /sys/class/i2c-adapter/i2c-$((20+i))/new_device + done +} + +remove_i2c_devices() { + echo 0x50 > /sys/class/i2c-adapter/i2c-1/delete_device + echo 0x51 > /sys/class/i2c-adapter/i2c-1/delete_device + echo 0x58 > /sys/class/i2c-adapter/i2c-1/delete_device + echo 0x59 > /sys/class/i2c-adapter/i2c-1/delete_device + echo 0x18 > /sys/class/i2c-adapter/i2c-10/delete_device + echo 0x4d > /sys/class/i2c-adapter/i2c-10/delete_device + echo 0x50 > /sys/class/i2c-adapter/i2c-10/delete_device + echo 0x53 > /sys/class/i2c-adapter/i2c-10/delete_device + echo 0x29 > /sys/class/i2c-adapter/i2c-11/delete_device + echo 0x2a > /sys/class/i2c-adapter/i2c-11/delete_device + echo 0x40 > /sys/class/i2c-adapter/i2c-11/delete_device + echo 0x42 > /sys/class/i2c-adapter/i2c-11/delete_device + echo 0x4c > /sys/class/i2c-adapter/i2c-11/delete_device + echo 0x4d > /sys/class/i2c-adapter/i2c-11/delete_device + echo 0x4e > /sys/class/i2c-adapter/i2c-11/delete_device + echo 0x51 > /sys/class/i2c-adapter/i2c-11/delete_device + echo 0x52 > /sys/class/i2c-adapter/i2c-11/delete_device + echo 0x53 > /sys/class/i2c-adapter/i2c-11/delete_device + for i in `seq 0 31`; do + echo 0x50 > /sys/class/i2c-adapter/i2c-$((20+i))/delete_device + done +} + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + modprobe i2c_mux_gpio + modprobe dell_s6000_platform + + add_i2c_devices + + /usr/local/bin/set-fan-speed 15000 + /usr/local/bin/reset-qsfp + + echo "done." + ;; + +stop) + echo "done." + + remove_i2c_devices + + rmmod dell_s6000_platform + rmmod i2c_mux_gpio + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/platform-modules-s6000.init {start|stop}" + exit 1 + ;; +esac + +exit 0 + diff --git a/platform/broadcom/sonic-platform-modules-s6000/debian/platform-modules-s6000.install b/platform/broadcom/sonic-platform-modules-s6000/debian/platform-modules-s6000.install new file mode 100644 index 000000000000..a059f39ff3c4 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/debian/platform-modules-s6000.install @@ -0,0 +1 @@ +systemd/platform-modules-s6000.service lib/systemd/system diff --git a/platform/broadcom/sonic-platform-modules-s6000/debian/rules b/platform/broadcom/sonic-platform-modules-s6000/debian/rules new file mode 100755 index 000000000000..5473743ea38d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/debian/rules @@ -0,0 +1,32 @@ +#!/usr/bin/make -f + +export INSTALL_MOD_DIR:=extra + +PACKAGE_NAME := platform-modules-s6000 +KVERSION ?= $(shell uname -r) +KERNEL_SRC := /lib/modules/$(KVERSION) +MODULE_SRC := $(shell pwd)/modules +SCRIPT_SRC := $(shell pwd)/scripts + +%: + dh $@ --with=systemd + +override_dh_auto_build: + make -C $(KERNEL_SRC)/build M=$(MODULE_SRC) + +override_dh_auto_install: + dh_installdirs -p$(PACKAGE_NAME) $(KERNEL_SRC)/$(INSTALL_MOD_DIR) + cp $(MODULE_SRC)/*.ko debian/$(PACKAGE_NAME)/$(KERNEL_SRC)/$(INSTALL_MOD_DIR) + dh_installdirs -p$(PACKAGE_NAME) usr/local/bin + cp -r $(SCRIPT_SRC)/* debian/$(PACKAGE_NAME)/usr/local/bin + +override_dh_usrlocal: + +override_dh_pysupport: + +override_dh_clean: + dh_clean + rm -f $(MODULE_SRC)/*.o $(MODULE_SRC)/*.ko $(MODULE_SRC)/*.mod.c $(MODULE_SRC)/.*.cmd + rm -f $(MODULE_SRC)/Module.markers $(MODULE_SRC)/Module.symvers $(MODULE_SRC)/modules.order + rm -rf $(MODULE_SRC)/.tmp_versions + diff --git a/platform/broadcom/sonic-platform-modules-s6000/modules/Makefile b/platform/broadcom/sonic-platform-modules-s6000/modules/Makefile new file mode 100644 index 000000000000..12e80d01010c --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/modules/Makefile @@ -0,0 +1 @@ +obj-m := dell_s6000_platform.o diff --git a/platform/broadcom/sonic-platform-modules-s6000/modules/dell_s6000_platform.c b/platform/broadcom/sonic-platform-modules-s6000/modules/dell_s6000_platform.c new file mode 100644 index 000000000000..cbd56c579dd2 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/modules/dell_s6000_platform.c @@ -0,0 +1,1222 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define S6000_MUX_BASE_NR 10 +#define QSFP_MODULE_BASE_NR 20 + +/* 74CBTLV3253 Dual 1-of-4 multiplexer/demultiplexer */ +#define MUX_CHANNEL_NUM 2 + +#define CPLD_DEVICE_NUM 3 +#define QSFP_MODULE_NUM 16 +#define QSFP_DEVICE_NUM 2 + + +static void device_release(struct device *dev) +{ + return; +} + +/* + * S6000 74CBTLV3253 MUX + */ +static const unsigned s6000_mux_gpios[] = { + 1, 2 +}; + +static const unsigned s6000_mux_values[] = { + 0, 1, 2, 3 +}; + +static struct i2c_mux_gpio_platform_data s6000_mux_platform_data = { + .parent = 2, + .base_nr = S6000_MUX_BASE_NR, + .values = s6000_mux_values, + .n_values = ARRAY_SIZE(s6000_mux_values), + .gpios = s6000_mux_gpios, + .n_gpios = ARRAY_SIZE(s6000_mux_gpios), + .idle = 0, +}; + +static struct platform_device s6000_mux = { + .name = "i2c-mux-gpio", + .id = 0, + .dev = { + .platform_data = &s6000_mux_platform_data, + .release = device_release + }, +}; + +/* + * S6000 CPLD + */ + +enum cpld_type { + system_cpld, + master_cpld, + slave_cpld, +}; + +struct cpld_platform_data { + int reg_addr; + struct i2c_client *client; +}; + +static struct cpld_platform_data s6000_cpld_platform_data[] = { + [system_cpld] = { + .reg_addr = 0x31, + }, + + [master_cpld] = { + .reg_addr = 0x32, + }, + + [slave_cpld] = { + .reg_addr = 0x33, + }, +}; + +static struct platform_device s6000_cpld = { + .name = "dell-s6000-cpld", + .id = 0, + .dev = { + .platform_data = s6000_cpld_platform_data, + .release = device_release + }, +}; + +/* + * S6000 QSFP MUX + */ + +struct qsfp_mux_platform_data { + int parent; + int base_nr; + int reg_addr; + struct i2c_client *cpld; +}; + +struct qsfp_mux { + struct qsfp_mux_platform_data data; +}; + +static struct qsfp_mux_platform_data s6000_qsfp_mux_platform_data[] = { + { + .parent = S6000_MUX_BASE_NR + 2, + .base_nr = QSFP_MODULE_BASE_NR, + .cpld = NULL, + .reg_addr = 0x0, + }, + { + .parent = S6000_MUX_BASE_NR + 3, + .base_nr = QSFP_MODULE_BASE_NR + QSFP_MODULE_NUM, + .cpld = NULL, + .reg_addr = 0xa, + }, +}; + +static struct platform_device s6000_qsfp_mux[] = { + { + .name = "dell-s6000-qsfp-mux", + .id = 0, + .dev = { + .platform_data = &s6000_qsfp_mux_platform_data[0], + .release = device_release, + }, + }, + { + .name = "dell-s6000-qsfp-mux", + .id = 1, + .dev = { + .platform_data = &s6000_qsfp_mux_platform_data[1], + .release = device_release, + }, + }, +}; + +static int cpld_reg_write_byte(struct i2c_client *client, u8 regaddr, u8 val) +{ + union i2c_smbus_data data; + + data.byte = val; + return client->adapter->algo->smbus_xfer(client->adapter, client->addr, + client->flags, + I2C_SMBUS_WRITE, + regaddr, I2C_SMBUS_BYTE_DATA, &data); +} + +static int qsfp_mux_select(struct i2c_mux_core *muxc, u32 chan) +{ + struct qsfp_mux *mux = i2c_mux_priv(muxc); + unsigned short mask = ~(unsigned short)(1 << chan); + + cpld_reg_write_byte(mux->data.cpld, mux->data.reg_addr, (u8)(mask & 0xff)); + return cpld_reg_write_byte(mux->data.cpld, mux->data.reg_addr + 1, (u8)(mask >> 8)); +} + +static int __init qsfp_mux_probe(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc; + struct qsfp_mux *mux; + struct qsfp_mux_platform_data *pdata; + struct i2c_adapter *parent; + int i, ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL); + if (!mux) { + return -ENOMEM; + } + + mux->data = *pdata; + + parent = i2c_get_adapter(pdata->parent); + if (!parent) { + dev_err(&pdev->dev, "Parent adapter (%d) not found\n", + pdata->parent); + return -EPROBE_DEFER; + } + + muxc = i2c_mux_alloc(parent, &pdev->dev, QSFP_MODULE_NUM, 0, 0, + qsfp_mux_select, NULL); + if (!muxc) { + ret = -ENOMEM; + goto alloc_failed; + } + muxc->priv = mux; + + platform_set_drvdata(pdev, muxc); + + for (i = 0; i < QSFP_MODULE_NUM; i++) { + int nr = pdata->base_nr + i; + unsigned int class = 0; + + ret = i2c_mux_add_adapter(muxc, nr, i, class); + if (ret) { + dev_err(&pdev->dev, "Failed to add adapter %d\n", i); + goto add_adapter_failed; + } + } + + dev_info(&pdev->dev, "%d port mux on %s adapter\n", QSFP_MODULE_NUM, parent->name); + + return 0; + +add_adapter_failed: + i2c_mux_del_adapters(muxc); +alloc_failed: + i2c_put_adapter(parent); + + return ret; +} + +static int qsfp_mux_remove(struct platform_device *pdev) +{ + struct i2c_mux_core *muxc = platform_get_drvdata(pdev); + + i2c_mux_del_adapters(muxc); + + i2c_put_adapter(muxc->parent); + + return 0; +} + +static struct platform_driver qsfp_mux_driver = { + .probe = qsfp_mux_probe, + .remove = qsfp_mux_remove, + .driver = { + .owner = THIS_MODULE, + .name = "dell-s6000-qsfp-mux", + }, +}; + +/* TODO */ +/* module_platform_driver */ + +static ssize_t get_modsel(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, 0x0); + if (ret < 0) + return sprintf(buf, "na"); + data = (u32)ret & 0xff; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, 0x1); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 8; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0xa); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 16; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0xb); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 24; + + return sprintf(buf, "0x%08x\n", data); +} + +static ssize_t get_lpmode(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, 0x2); + if (ret < 0) + return sprintf(buf, "na"); + data = (u32)ret & 0xff; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, 0x3); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 8; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0xc); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 16; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0xd); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 24; + + return sprintf(buf, "0x%08x\n", data); +} + +static ssize_t set_lpmode(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long data; + int err; + struct cpld_platform_data *pdata = dev->platform_data; + + err = kstrtoul(buf, 16, &data); + if (err) + return err; + + i2c_smbus_write_byte_data(pdata[slave_cpld].client, 0x2, (u8)(data & 0xff)); + i2c_smbus_write_byte_data(pdata[slave_cpld].client, 0x3, (u8)((data >> 8) & 0xff)); + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0xc, (u8)((data >> 16) & 0xff)); + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0xd, (u8)((data >> 24) & 0xff)); + + return count; +} + +static ssize_t get_reset(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, 0x6); + if (ret < 0) + return sprintf(buf, "na"); + data = (u32)ret & 0xff; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, 0x7); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 8; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x10); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 16; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x11); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 24; + + return sprintf(buf, "0x%08x\n", data); +} + +static ssize_t set_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long data; + int err; + struct cpld_platform_data *pdata = dev->platform_data; + + err = kstrtoul(buf, 16, &data); + if (err) + return err; + + i2c_smbus_write_byte_data(pdata[slave_cpld].client, 0x6, (u8)(data & 0xff)); + i2c_smbus_write_byte_data(pdata[slave_cpld].client, 0x7, (u8)((data >> 8)& 0xff)); + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x10, (u8)((data >> 16) & 0xff)); + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x11, (u8)((data >> 24) & 0xff)); + + return count; +} + +static ssize_t get_modprs(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, 0x4); + if (ret < 0) + return sprintf(buf, "read error"); + data = (u32)ret & 0xff; + + ret = i2c_smbus_read_byte_data(pdata[slave_cpld].client, 0x5); + if (ret < 0) + return sprintf(buf, "read error"); + data |= (u32)(ret & 0xff) << 8; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0xe); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 16; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0xf); + if (ret < 0) + return sprintf(buf, "na"); + data |= (u32)(ret & 0xff) << 24; + + return sprintf(buf, "0x%08x\n", data); +} + +static ssize_t set_power_reset(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + unsigned long data; + int err; + struct cpld_platform_data *pdata = dev->platform_data; + + err = kstrtoul(buf, 10, &data); + if (err) + return err; + + if (data) + { + i2c_smbus_write_byte_data(pdata[system_cpld].client, 0x1, (u8)(0xfd)); + } + + return count; +} + +static ssize_t get_power_reset(struct device *dev, struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "0\n"); +} + +static ssize_t get_fan_prs(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x8); + if (ret < 0) + return sprintf(buf, "read error"); + data = (u32)((ret & 0xc0) >> 6); + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x9); + if (ret < 0) + return sprintf(buf, "read error"); + data |= (u32)((ret & 0x01) << 2); + data = ~data & 0x7; + + return sprintf(buf, "0x%x\n", data); +} + +static ssize_t get_psu0_prs(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x3); + if (ret < 0) + return sprintf(buf, "read error"); + + if (!(ret & 0x80)) + data = 1; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t get_psu1_prs(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x3); + if (ret < 0) + return sprintf(buf, "read error"); + + if (!(ret & 0x08)) + data = 1; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t get_psu0_status(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x3); + if (ret < 0) + return sprintf(buf, "read error"); + + if (!(ret & 0x40)) + data = 1; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t get_psu1_status(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x3); + if (ret < 0) + return sprintf(buf, "read error"); + + if (!(ret & 0x04)) + data = 1; + + return sprintf(buf, "%d\n", data); +} + +static ssize_t get_system_led(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x7); + if (ret < 0) + return sprintf(buf, "read error"); + + data = (u32)(ret & 0x60) >> 5; + + switch (data) + { + case 0: + ret = sprintf(buf, "blink_green\n"); + break; + case 1: + ret = sprintf(buf, "green\n"); + break; + case 2: + ret = sprintf(buf, "yellow\n"); + break; + default: + ret = sprintf(buf, "blink_yellow\n"); + } + + return ret; +} + +static ssize_t set_system_led(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + if (!strncmp(buf, "blink_green", 11)) + { + data = 0; + } + else if (!strncmp(buf, "green", 5)) + { + data = 1; + } + else if (!strncmp(buf, "yellow", 6)) + { + data = 2; + } + else if (!strncmp(buf, "blink_yellow", 12)) + { + data = 3; + } + else + { + return -1; + } + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x7); + if (ret < 0) + return ret; + + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x7, (u8)((ret & 0x9F) | (data << 5))); + + return count; +} + +static ssize_t get_locator_led(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x7); + if (ret < 0) + return sprintf(buf, "read error"); + + data = (u32)(ret & 0x18) >> 3; + + switch (data) + { + case 0: + ret = sprintf(buf, "off\n"); + break; + case 1: + ret = sprintf(buf, "blink_blue\n"); + break; + case 2: + ret = sprintf(buf, "blue\n"); + break; + default: + ret = sprintf(buf, "invalid\n"); + } + + return ret; +} + +static ssize_t set_locator_led(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + if (!strncmp(buf, "off", 3)) + { + data = 0; + } + else if (!strncmp(buf, "blink_blue", 10)) + { + data = 1; + } + else if (!strncmp(buf, "blue", 4)) + { + data = 2; + } + else + { + return -1; + } + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x7); + if (ret < 0) + return ret; + + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x7, (u8)((ret & 0xE7) | (data << 3))); + + return count; +} + +static ssize_t get_power_led(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x7); + if (ret < 0) + return sprintf(buf, "read error"); + + data = (u32)(ret & 0x06) >> 1; + + switch (data) + { + case 0: + ret = sprintf(buf, "off\n"); + break; + case 1: + ret = sprintf(buf, "yellow\n"); + break; + case 2: + ret = sprintf(buf, "green\n"); + break; + default: + ret = sprintf(buf, "blink_yellow\n"); + } + + return ret; +} + +static ssize_t set_power_led(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + if (!strncmp(buf, "off", 3)) + { + data = 0; + } + else if (!strncmp(buf, "yellow", 6)) + { + data = 1; + } + else if (!strncmp(buf, "green", 5)) + { + data = 2; + } + else if (!strncmp(buf, "blink_yellow", 12)) + { + data = 3; + } + else + { + return -1; + } + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x7); + if (ret < 0) + return ret; + + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x7, (u8)((ret & 0xF9) | (data << 1))); + + return count; +} + +static ssize_t get_master_led(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x7); + if (ret < 0) + return sprintf(buf, "read error"); + + data = (u32)(ret & 0x1); + + switch (data) + { + case 0: + ret = sprintf(buf, "green\n"); + break; + default: + ret = sprintf(buf, "off\n"); + break; + } + + return ret; +} + +static ssize_t set_master_led(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + if (!strncmp(buf, "green", 5)) + { + data = 0; + } + else if (!strncmp(buf, "off", 3)) + { + data = 1; + } + else + { + return -1; + } + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x7); + if (ret < 0) + return ret; + + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x7, (u8)((ret & 0xFE) | data)); + + return count; +} + +static ssize_t get_fan_led(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x9); + if (ret < 0) + return sprintf(buf, "read error"); + + data = (u32)(ret & 0x18) >> 3; + + switch (data) + { + case 0: + ret = sprintf(buf, "off\n"); + break; + case 1: + ret = sprintf(buf, "yellow\n"); + break; + case 2: + ret = sprintf(buf, "green\n"); + break; + default: + ret = sprintf(buf, "blink_yellow\n"); + } + + return ret; +} + +static ssize_t set_fan_led(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + if (!strncmp(buf, "off", 3)) + { + data = 0; + } + else if (!strncmp(buf, "yellow", 6)) + { + data = 1; + } + else if (!strncmp(buf, "green", 5)) + { + data = 2; + } + else if (!strncmp(buf, "blink_yellow", 12)) + { + data = 3; + } + else + { + return -1; + } + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x9); + if (ret < 0) + return ret; + + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x9, (u8)((ret & 0xE7) | (data << 3))); + + return count; +} + +static ssize_t get_fan0_led(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x8); + if (ret < 0) + return sprintf(buf, "read error"); + + data = (u32)(ret & 0x3); + + switch (data) + { + case 0: + ret = sprintf(buf, "off\n"); + break; + case 1: + ret = sprintf(buf, "green\n"); + break; + case 2: + ret = sprintf(buf, "yellow\n"); + break; + default: + ret = sprintf(buf, "unknown\n"); + } + + return ret; +} + +static ssize_t set_fan0_led(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + if (!strncmp(buf, "off", 3)) + { + data = 0; + } + else if (!strncmp(buf, "yellow", 6)) + { + data = 2; + } + else if (!strncmp(buf, "green", 5)) + { + data = 1; + } + else + { + return -1; + } + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x8); + if (ret < 0) + return ret; + + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x8, (u8)((ret & 0xFC) | data)); + + return count; +} + + +static ssize_t get_fan1_led(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x8); + if (ret < 0) + return sprintf(buf, "read error"); + + data = (u32)(ret & 0xc) >> 2; + + switch (data) + { + case 0: + ret = sprintf(buf, "off\n"); + break; + case 1: + ret = sprintf(buf, "green\n"); + break; + case 2: + ret = sprintf(buf, "yellow\n"); + break; + default: + ret = sprintf(buf, "unknown\n"); + } + + return ret; +} + +static ssize_t set_fan1_led(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + if (!strncmp(buf, "off", 3)) + { + data = 0; + } + else if (!strncmp(buf, "yellow", 6)) + { + data = 2; + } + else if (!strncmp(buf, "green", 5)) + { + data = 1; + } + else + { + return -1; + } + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x8); + if (ret < 0) + return ret; + + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x8, (u8)((ret & 0xF3) | (data << 2))); + + return count; +} + +static ssize_t get_fan2_led(struct device *dev, struct device_attribute *devattr, char *buf) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x8); + if (ret < 0) + return sprintf(buf, "read error"); + + data = (u32)(ret & 0x30) >> 4; + + switch (data) + { + case 0: + ret = sprintf(buf, "off\n"); + break; + case 1: + ret = sprintf(buf, "green\n"); + break; + case 2: + ret = sprintf(buf, "yellow\n"); + break; + default: + ret = sprintf(buf, "unknown\n"); + } + + return ret; +} + +static ssize_t set_fan2_led(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) +{ + int ret; + u32 data = 0; + struct cpld_platform_data *pdata = dev->platform_data; + + if (!strncmp(buf, "off", 3)) + { + data = 0; + } + else if (!strncmp(buf, "yellow", 6)) + { + data = 2; + } + else if (!strncmp(buf, "green", 5)) + { + data = 1; + } + else + { + return -1; + } + + ret = i2c_smbus_read_byte_data(pdata[master_cpld].client, 0x8); + if (ret < 0) + return ret; + + i2c_smbus_write_byte_data(pdata[master_cpld].client, 0x8, (u8)((ret & 0xCF) | (data << 4))); + + return count; +} + +static DEVICE_ATTR(qsfp_modsel, S_IRUGO, get_modsel, NULL); +static DEVICE_ATTR(qsfp_modprs, S_IRUGO, get_modprs, NULL); +static DEVICE_ATTR(qsfp_lpmode, S_IRUGO | S_IWUSR, get_lpmode, set_lpmode); +static DEVICE_ATTR(qsfp_reset, S_IRUGO | S_IWUSR, get_reset, set_reset); +static DEVICE_ATTR(power_reset, S_IRUGO | S_IWUSR, get_power_reset, set_power_reset); +static DEVICE_ATTR(fan_prs, S_IRUGO, get_fan_prs, NULL); +static DEVICE_ATTR(psu0_prs, S_IRUGO, get_psu0_prs, NULL); +static DEVICE_ATTR(psu1_prs, S_IRUGO, get_psu1_prs, NULL); +static DEVICE_ATTR(psu0_status, S_IRUGO, get_psu0_status, NULL); +static DEVICE_ATTR(psu1_status, S_IRUGO, get_psu1_status, NULL); +static DEVICE_ATTR(system_led, S_IRUGO | S_IWUSR, get_system_led, set_system_led); +static DEVICE_ATTR(locator_led, S_IRUGO | S_IWUSR, get_locator_led, set_locator_led); +static DEVICE_ATTR(power_led, S_IRUGO | S_IWUSR, get_power_led, set_power_led); +static DEVICE_ATTR(master_led, S_IRUGO | S_IWUSR, get_master_led, set_master_led); +static DEVICE_ATTR(fan_led, S_IRUGO | S_IWUSR, get_fan_led, set_fan_led); +static DEVICE_ATTR(fan0_led, S_IRUGO | S_IWUSR, get_fan0_led, set_fan0_led); +static DEVICE_ATTR(fan1_led, S_IRUGO | S_IWUSR, get_fan1_led, set_fan1_led); +static DEVICE_ATTR(fan2_led, S_IRUGO | S_IWUSR, get_fan2_led, set_fan2_led); + +static struct attribute *s6000_cpld_attrs[] = { + &dev_attr_qsfp_modsel.attr, + &dev_attr_qsfp_lpmode.attr, + &dev_attr_qsfp_reset.attr, + &dev_attr_qsfp_modprs.attr, + &dev_attr_power_reset.attr, + &dev_attr_fan_prs.attr, + &dev_attr_psu0_prs.attr, + &dev_attr_psu1_prs.attr, + &dev_attr_psu0_status.attr, + &dev_attr_psu1_status.attr, + &dev_attr_system_led.attr, + &dev_attr_locator_led.attr, + &dev_attr_power_led.attr, + &dev_attr_master_led.attr, + &dev_attr_fan_led.attr, + &dev_attr_fan0_led.attr, + &dev_attr_fan1_led.attr, + &dev_attr_fan2_led.attr, + NULL, +}; + +static struct attribute_group s6000_cpld_attr_grp = { + .attrs = s6000_cpld_attrs, +}; + +static int __init cpld_probe(struct platform_device *pdev) +{ + struct cpld_platform_data *pdata; + struct i2c_adapter *parent; + int i; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + return -ENODEV; + } + + parent = i2c_get_adapter(S6000_MUX_BASE_NR); + if (!parent) { + printk(KERN_WARNING "Parent adapter (%d) not found\n", + S6000_MUX_BASE_NR); + return -ENODEV; + } + + for (i = 0; i < CPLD_DEVICE_NUM; i++) { + pdata[i].client = i2c_new_dummy(parent, pdata[i].reg_addr); + if (!pdata[i].client) { + printk(KERN_WARNING "Fail to create dummy i2c client for addr %d\n", pdata[i].reg_addr); + goto error; + } + } + + ret = sysfs_create_group(&pdev->dev.kobj, &s6000_cpld_attr_grp); + if (ret) + goto error; + + return 0; + +error: + i--; + for (; i >= 0; i--) { + if (pdata[i].client) { + i2c_unregister_device(pdata[i].client); + } + } + + i2c_put_adapter(parent); + + return -ENODEV; +} + +static int __exit cpld_remove(struct platform_device *pdev) +{ + int i; + struct i2c_adapter *parent = NULL; + struct cpld_platform_data *pdata = pdev->dev.platform_data; + + sysfs_remove_group(&pdev->dev.kobj, &s6000_cpld_attr_grp); + + if (!pdata) { + dev_err(&pdev->dev, "Missing platform data\n"); + } else { + for (i = 0; i < CPLD_DEVICE_NUM; i++) { + if (pdata[i].client) { + if (!parent) { + parent = (pdata[i].client)->adapter; + } + i2c_unregister_device(pdata[i].client); + } + } + } + + i2c_put_adapter(parent); + + return 0; +} + +static struct platform_driver cpld_driver = { + .probe = cpld_probe, + .remove = __exit_p(cpld_remove), + .driver = { + .owner = THIS_MODULE, + .name = "dell-s6000-cpld", + }, +}; + +static int __init dell_s6000_platform_init(void) +{ + int ret = 0; + struct cpld_platform_data *cpld_pdata; + struct qsfp_mux_platform_data *qsfp_pdata; + int i; + + printk("delll_s6000_platform module initialization\n"); + + ret = platform_driver_register(&cpld_driver); + if (ret) { + printk(KERN_WARNING "Fail to register cpld driver\n"); + goto error_cpld_driver; + } + + ret = platform_driver_register(&qsfp_mux_driver); + if (ret) { + printk(KERN_WARNING "Fail to register qsfp mux driver\n"); + goto error_qsfp_mux_driver; + } + + ret = platform_device_register(&s6000_mux); + if (ret) { + printk(KERN_WARNING "Fail to create gpio mux\n"); + goto error_mux; + } + + ret = platform_device_register(&s6000_cpld); + if (ret) { + printk(KERN_WARNING "Fail to create cpld device\n"); + goto error_cpld; + } + + cpld_pdata = s6000_cpld.dev.platform_data; + qsfp_pdata = s6000_qsfp_mux[0].dev.platform_data; + qsfp_pdata->cpld = cpld_pdata[slave_cpld].client; + qsfp_pdata = s6000_qsfp_mux[1].dev.platform_data; + qsfp_pdata->cpld = cpld_pdata[master_cpld].client; + + for (i = 0; i < QSFP_DEVICE_NUM; i++) { + ret = platform_device_register(&s6000_qsfp_mux[i]); + if (ret) { + printk(KERN_WARNING "fail to create qsfp mux %d\n", i); + goto error_qsfp_mux; + } + } + + if (ret) + goto error_qsfp_mux; + + return 0; + +error_qsfp_mux: + i--; + for (; i >= 0; i--) { + platform_device_unregister(&s6000_qsfp_mux[i]); + } + platform_device_unregister(&s6000_cpld); +error_cpld: + platform_device_unregister(&s6000_mux); +error_mux: + platform_driver_unregister(&qsfp_mux_driver); +error_qsfp_mux_driver: + platform_driver_unregister(&cpld_driver); +error_cpld_driver: + return ret; +} + +static void __exit dell_s6000_platform_exit(void) +{ + int i; + + for (i = 0; i < MUX_CHANNEL_NUM; i++) + platform_device_unregister(&s6000_qsfp_mux[i]); + platform_device_unregister(&s6000_cpld); + platform_device_unregister(&s6000_mux); + + platform_driver_unregister(&cpld_driver); + platform_driver_unregister(&qsfp_mux_driver); +} + +module_init(dell_s6000_platform_init); +module_exit(dell_s6000_platform_exit); + +MODULE_DESCRIPTION("DELL S6000 Platform Support"); +MODULE_AUTHOR("Guohan Lu "); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-s6000/scripts/reset-qsfp b/platform/broadcom/sonic-platform-modules-s6000/scripts/reset-qsfp new file mode 100755 index 000000000000..6b017ed37c26 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/scripts/reset-qsfp @@ -0,0 +1,25 @@ +#!/bin/bash + +# Usage: +# Reset QSFP manually by writing 1/0 to QSFP reset pin + +QSFP_RESET=/sys/bus/platform/devices/dell-s6000-cpld.0/qsfp_reset + +logger -t platform-modules "Reset QSFP modules" + +# Retry three times +for i in `seq 1 3` +do + if [ -w $QSFP_RESET ]; then + echo 0x00000000 > $QSFP_RESET + # Sleep 1 second to reset QSFP + sleep 1 + echo 0xffffffff > $QSFP_RESET + exit 0 + fi + # Sleep for 3 seconds to wait for device tree to be ready + sleep 3 +done + +logger -p user.error -t platform-modules "Failed to reset QSFP modules!" +exit 1 diff --git a/platform/broadcom/sonic-platform-modules-s6000/scripts/set-fan-speed b/platform/broadcom/sonic-platform-modules-s6000/scripts/set-fan-speed new file mode 100755 index 000000000000..00c738f23a8d --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/scripts/set-fan-speed @@ -0,0 +1,58 @@ +#!/bin/bash + +# Usage: +# Set all fans speed to $1 + +usage() { + echo "This script must be run with super-user privilege." + echo "Warning! Wrongly set fan speed may result in physical damage to the device." + echo "" + echo "usage: set-fan-speed speed_in_rpm" + echo "example: set-fan-speed 15000" +} + +if [ $# -ne 1 ]; then + usage + exit 1 +fi + +PSU_FAN1=/sys/class/i2c-adapter/i2c-1/1-0058/fan1_target +PSU_FAN2=/sys/class/i2c-adapter/i2c-1/1-0059/fan1_target + +# Three fan trays with each contains two separate fans +# fan1-fan4 fan2-fan5 fan3-fan6 +FAN1=/sys/class/i2c-adapter/i2c-11/11-0029/fan1_target +FAN2=/sys/class/i2c-adapter/i2c-11/11-0029/fan2_target +FAN3=/sys/class/i2c-adapter/i2c-11/11-0029/fan3_target +FAN4=/sys/class/i2c-adapter/i2c-11/11-0029/fan4_target +FAN5=/sys/class/i2c-adapter/i2c-11/11-002a/fan1_target +FAN6=/sys/class/i2c-adapter/i2c-11/11-002a/fan2_target + +speed=$1 +logger -t platform-modules "Trying to set fan speed to $speed" + +# Retry three times +for i in `seq 1 3` +do + if [ -w $FAN1 -o -w $FAN2 -o -w $FAN3 ]; then + # set default psu fan speed + echo $speed > $PSU_FAN1 + echo $speed > $PSU_FAN2 + # set default fan speed + echo $speed > $FAN1 + echo $speed > $FAN2 + echo $speed > $FAN3 + echo $speed > $FAN4 + echo $speed > $FAN5 + echo $speed > $FAN6 + + logger -t platform-modules "Fan speed is set to $speed" + + exit 0 + fi + # Sleep for 3 seconds to wait for device tree to be ready + sleep 3 +done + +logger -p user.error -t platform-modules "Failed to set fan speed!" +exit 1 diff --git a/platform/broadcom/sonic-platform-modules-s6000/systemd/platform-modules-s6000.service b/platform/broadcom/sonic-platform-modules-s6000/systemd/platform-modules-s6000.service new file mode 100644 index 000000000000..246dee9b64f3 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-s6000/systemd/platform-modules-s6000.service @@ -0,0 +1,13 @@ +[Unit] +Description=Dell S6000 Platform modules +After=local-fs.target +Before=pmon.service + +[Service] +Type=oneshot +ExecStart=-/etc/init.d/platform-modules-s6000 start +ExecStop=-/etc/init.d/platform-modules-s6000 stop +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target From 859d0e1e8aa6c678d28e8911bce459089d67215b Mon Sep 17 00:00:00 2001 From: lguohan Date: Mon, 13 Aug 2018 11:34:04 -0700 Subject: [PATCH 139/180] [bcmsh]: add inactivity timeout for bcmsh (default 300 seconds) (#1921) Signed-off-by: Guohan Lu --- platform/broadcom/docker-syncd-brcm/bcmsh | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/platform/broadcom/docker-syncd-brcm/bcmsh b/platform/broadcom/docker-syncd-brcm/bcmsh index 9dfa7874a038..7488e63c64fd 100755 --- a/platform/broadcom/docker-syncd-brcm/bcmsh +++ b/platform/broadcom/docker-syncd-brcm/bcmsh @@ -1,24 +1,29 @@ #!/bin/bash -usage="$(basename "$0") [-h] [-q] -- interactive shell for bcm service +usage="$(basename "$0") [-h] [-q] [-t timeout] -- interactive shell for bcm service where: -h show this help text + -t inactivity timeout in seconds (default 300 seconds, 0 for no timeout) -q quite, no banner (default: verbose)" banner="Press Enter to show prompt. Press Ctrl+C to exit. +NOTICE: Only one bcmsh or bcmcmd can connect to the shell at same time. " # Default verbose quiet=false +timeout=300 -while getopts 'hq' option; do +while getopts 'hqt:' option; do case "$option" in h) echo "$usage" exit ;; q) quiet=true ;; + t) timeout=$OPTARG + ;; \?) printf "illegal option: -%s\n" "$OPTARG" >&2 echo "$usage" >&2 exit 1 @@ -31,5 +36,5 @@ if [ "$quiet" = false ]; then echo "$banner" fi -/usr/bin/socat readline UNIX-CONNECT:/var/run/sswsyncd/sswsyncd.socket +/usr/bin/socat -T$timeout readline UNIX-CONNECT:/var/run/sswsyncd/sswsyncd.socket From 40bb27ca1c133e8b5971780ab70f2f88613336d6 Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Mon, 13 Aug 2018 18:30:00 -0700 Subject: [PATCH 140/180] Simplify script to install docker (#1925) Signed-off-by: Qi Luo --- build_debian.sh | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/build_debian.sh b/build_debian.sh index d531a7207367..fc8a2cb59b2d 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -162,10 +162,10 @@ sudo LANG=C chroot $FILESYSTEM_ROOT apt-get -y install apparmor docker_deb_url=https://apt.dockerproject.org/repo/pool/main/d/docker-engine/docker-engine_${DOCKER_VERSION}.deb docker_deb_temp=`mktemp` trap_push "rm -f $docker_deb_temp" -wget $docker_deb_url -qO $docker_deb_temp && { \ - sudo dpkg --root=$FILESYSTEM_ROOT -i $docker_deb_temp || \ - sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f; \ -} +wget $docker_deb_url -qO $docker_deb_temp +sudo dpkg --root=$FILESYSTEM_ROOT -i $docker_deb_temp || \ + sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f + ## Add docker config drop-in to select aufs, otherwise it may select other storage driver sudo mkdir -p $FILESYSTEM_ROOT/etc/systemd/system/docker.service.d/ ## Note: $_ means last argument of last command From e15cf2d66a8301cc7e33b9b205b61111ddbd2f88 Mon Sep 17 00:00:00 2001 From: lguohan Date: Mon, 13 Aug 2018 18:30:22 -0700 Subject: [PATCH 141/180] [build]: print error message when use root or sudo to build. (#1923) Signed-off-by: Guohan Lu --- Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Makefile b/Makefile index c5c5d59620c8..2dfab3274869 100644 --- a/Makefile +++ b/Makefile @@ -25,6 +25,10 @@ SHELL = /bin/bash USER := $(shell id -un) PWD := $(shell pwd) +ifeq ($(USER), root) +$(error Add your user account to docker group and use your user account to make. root or sudo are not supported!) +endif + # Remove lock file in case previous run was forcefully stopped $(shell rm -f .screen) From 4547d9aa2a027a430b36dc1a3aab3d1676dabe04 Mon Sep 17 00:00:00 2001 From: Guohan Lu Date: Tue, 14 Aug 2018 05:22:29 +0000 Subject: [PATCH 142/180] [nephos]: build platform modules in debian stretch docker Signed-off-by: Guohan Lu --- platform/nephos/platform-modules-accton.mk | 2 ++ platform/nephos/platform-modules-ingrasys.mk | 2 ++ 2 files changed, 4 insertions(+) diff --git a/platform/nephos/platform-modules-accton.mk b/platform/nephos/platform-modules-accton.mk index 110d0f3a5a11..1faa38acbfff 100644 --- a/platform/nephos/platform-modules-accton.mk +++ b/platform/nephos/platform-modules-accton.mk @@ -9,3 +9,5 @@ $(ACCTON_AS7116_54X_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform- $(ACCTON_AS7116_54X_PLATFORM_MODULE)_DEPENDS += $(LINUX_HEADERS) $(LINUX_HEADERS_COMMON) $(ACCTON_AS7116_54X_PLATFORM_MODULE)_PLATFORM = x86_64-accton_as7116_54x-r0 SONIC_DPKG_DEBS += $(ACCTON_AS7116_54X_PLATFORM_MODULE) + +SONIC_STRETCH_DEBS += $(ACCTON_AS7712_32X_PLATFORM_MODULE) diff --git a/platform/nephos/platform-modules-ingrasys.mk b/platform/nephos/platform-modules-ingrasys.mk index dde33e0b8745..6cbe5dc77be4 100644 --- a/platform/nephos/platform-modules-ingrasys.mk +++ b/platform/nephos/platform-modules-ingrasys.mk @@ -16,3 +16,5 @@ INGRASYS_S9230_64X_PLATFORM_MODULE = sonic-platform-ingrasys-s9230-64x_$(INGRASY $(INGRASYS_S9230_64X_PLATFORM_MODULE)_PLATFORM = x86_64-ingrasys_s9230_64x-r0 $(eval $(call add_extra_package,$(INGRASYS_S9130_32X_PLATFORM_MODULE),$(INGRASYS_S9230_64X_PLATFORM_MODULE))) + +SONIC_STRETCH_DEBS += $(INGRASYS_S9130_32X_PLATFORM_MODULE) From cdc271720d7f1ecacaa67d64d3ad672d6157fc6f Mon Sep 17 00:00:00 2001 From: pavel-shirshov Date: Tue, 14 Aug 2018 00:35:30 -0700 Subject: [PATCH 143/180] [submodule update]: sonic-quagga. Add dscp flag settings (#1926) * sonic-quagga update. Don't spam with 'Vtysh connected from' message * Enable counters inside swss container. systemd is not flexible enough to follow our business rules * Update sonic-quagga --- src/sonic-quagga | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-quagga b/src/sonic-quagga index cde29666c363..a0630b7f1bf6 160000 --- a/src/sonic-quagga +++ b/src/sonic-quagga @@ -1 +1 @@ -Subproject commit cde29666c363e34ea7f230bb827644457acedcbc +Subproject commit a0630b7f1bf6b30c9a71a59a22b08fad105e69bc From 746ad967a482999f4060c44ae50615331b0d50bd Mon Sep 17 00:00:00 2001 From: Volodymyr Samotiy Date: Tue, 14 Aug 2018 21:46:01 +0300 Subject: [PATCH 144/180] [mellanox]: Fix post stop action in swss service template (#1928) Signed-off-by: Volodymyr Samotiy --- files/build_templates/swss.service.j2 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/files/build_templates/swss.service.j2 b/files/build_templates/swss.service.j2 index 289a840d3517..8a138d46a7ca 100644 --- a/files/build_templates/swss.service.j2 +++ b/files/build_templates/swss.service.j2 @@ -44,7 +44,7 @@ ExecStop=/usr/bin/{{docker_container_name}}.sh stop ExecStopPost=/usr/bin/syncd.sh stop {% if sonic_asic_platform == 'mellanox' %} -ExecStartPre=/bin/bash -c "/etc/mlnx/mlnx-hw-management stop" +ExecStopPost=/bin/bash -c "/etc/mlnx/mlnx-hw-management stop" ExecStopPost=/etc/init.d/sxdkernel stop ExecStopPost=/usr/bin/mst stop {% elif sonic_asic_platform == 'cavium' %} From 6918a22959d4295693bd08a584acb1e0c042e732 Mon Sep 17 00:00:00 2001 From: loshihyu Date: Tue, 14 Aug 2018 13:07:03 -0700 Subject: [PATCH 145/180] [Inventec] Add D7264 platform support (#1675) * Add Inventec D7264 platform support * Fixed util script file permission * Fixed more scripts file permission --- .../INVENTEC-D7264Q28B/port_config.ini | 65 + .../INVENTEC-D7264Q28B/sai.profile | 2 + .../th2-d7264q28b-64x100g.config.bcm | 841 ++ .../installer.conf | 4 + .../led_proc_init.soc | 273 + .../minigraph.xml | 144 + .../plugins/eeprom.py | 22 + .../plugins/psuutil.py | 93 + .../plugins/sfputil.py | 219 + platform/broadcom/one-image.mk | 1 + .../broadcom/platform-modules-inventec.mk | 10 +- .../d7264q28b/modules/Makefile | 6 + .../d7264q28b/modules/inv_cpld.c | 470 + .../d7264q28b/modules/inv_eeprom.c | 181 + .../d7264q28b/modules/inv_platform.c | 239 + .../d7264q28b/modules/inv_psoc.c | 768 ++ .../d7264q28b/modules/inv_swps.c | 719 ++ .../d7264q28b/modules/inv_swps.h | 184 + .../d7264q28b/modules/io_expander.c | 1786 ++++ .../d7264q28b/modules/io_expander.h | 173 + .../d7264q28b/modules/transceiver.c | 8212 +++++++++++++++++ .../d7264q28b/modules/transceiver.h | 792 ++ .../d7264q28b/utils/inventec_d7264_util.py | 241 + .../debian/changelog | 5 + .../debian/control | 4 + .../debian/platform-modules-d7264q28b.init | 40 + .../debian/platform-modules-d7264q28b.install | 1 + .../debian/platform-modules-d7264q28b.upstart | 5 + .../debian/rules | 2 +- 29 files changed, 15499 insertions(+), 3 deletions(-) create mode 100644 device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/port_config.ini create mode 100644 device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/sai.profile create mode 100644 device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/th2-d7264q28b-64x100g.config.bcm create mode 100644 device/inventec/x86_64-inventec_d7264q28b-r0/installer.conf create mode 100644 device/inventec/x86_64-inventec_d7264q28b-r0/led_proc_init.soc create mode 100644 device/inventec/x86_64-inventec_d7264q28b-r0/minigraph.xml create mode 100644 device/inventec/x86_64-inventec_d7264q28b-r0/plugins/eeprom.py create mode 100755 device/inventec/x86_64-inventec_d7264q28b-r0/plugins/psuutil.py create mode 100755 device/inventec/x86_64-inventec_d7264q28b-r0/plugins/sfputil.py create mode 100755 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/Makefile create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_cpld.c create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_eeprom.c create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_platform.c create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_psoc.c create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_swps.c create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_swps.h create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/io_expander.c create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/io_expander.h create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/transceiver.c create mode 100644 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/transceiver.h create mode 100755 platform/broadcom/sonic-platform-modules-inventec/d7264q28b/utils/inventec_d7264_util.py create mode 100644 platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.init create mode 100644 platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.install create mode 100644 platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.upstart diff --git a/device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/port_config.ini b/device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/port_config.ini new file mode 100644 index 000000000000..3fc6db4c8198 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/port_config.ini @@ -0,0 +1,65 @@ +# name lanes alias +Ethernet0 9,10,11,12 Ethernet0 +Ethernet4 1,2,3,4 Ethernet4 +Ethernet8 25,26,27,28 Ethernet8 +Ethernet12 17,18,19,20 Ethernet12 +Ethernet16 41,42,43,44 Ethernet16 +Ethernet20 33,34,35,36 Ethernet20 +Ethernet24 57,58,59,60 Ethernet24 +Ethernet28 49,50,51,52 Ethernet28 +Ethernet32 73,74,75,76 Ethernet32 +Ethernet36 65,66,67,68 Ethernet36 +Ethernet40 89,90,91,92 Ethernet40 +Ethernet44 81,82,83,84 Ethernet44 +Ethernet48 105,106,107,108 Ethernet48 +Ethernet52 97,98,99,100 Ethernet52 +Ethernet56 121,122,123,124 Ethernet56 +Ethernet60 113,114,115,116 Ethernet60 +Ethernet64 137,138,139,140 Ethernet64 +Ethernet68 129,130,131,132 Ethernet68 +Ethernet72 153,154,155,156 Ethernet72 +Ethernet76 145,146,147,148 Ethernet76 +Ethernet80 169,170,171,172 Ethernet80 +Ethernet84 161,162,163,164 Ethernet84 +Ethernet88 185,186,187,188 Ethernet88 +Ethernet92 177,178,179,180 Ethernet92 +Ethernet96 201,202,203,204 Ethernet96 +Ethernet100 193,194,195,196 Ethernet100 +Ethernet104 217,218,219,220 Ethernet104 +Ethernet108 209,210,211,212 Ethernet108 +Ethernet112 233,234,235,236 Ethernet112 +Ethernet116 225,226,227,228 Ethernet116 +Ethernet120 249,250,251,252 Ethernet120 +Ethernet124 241,242,243,244 Ethernet124 +Ethernet128 13,14,15,16 Ethernet128 +Ethernet132 5,6,7,8 Ethernet132 +Ethernet136 29,30,31,32 Ethernet136 +Ethernet140 21,22,23,24 Ethernet140 +Ethernet144 45,46,47,48 Ethernet144 +Ethernet148 37,38,39,40 Ethernet148 +Ethernet152 61,62,63,64 Ethernet152 +Ethernet156 53,54,55,56 Ethernet156 +Ethernet160 77,78,79,80 Ethernet160 +Ethernet164 69,70,71,72 Ethernet164 +Ethernet168 93,94,95,96 Ethernet168 +Ethernet172 85,86,87,88 Ethernet172 +Ethernet176 109,110,111,112 Ethernet176 +Ethernet180 101,102,103,104 Ethernet180 +Ethernet184 125,126,127,128 Ethernet184 +Ethernet188 117,118,119,120 Ethernet188 +Ethernet192 141,142,143,144 Ethernet192 +Ethernet196 133,134,135,136 Ethernet196 +Ethernet200 157,158,159,160 Ethernet200 +Ethernet204 149,150,151,152 Ethernet204 +Ethernet208 173,174,175,176 Ethernet208 +Ethernet212 165,166,167,168 Ethernet212 +Ethernet216 189,190,191,192 Ethernet216 +Ethernet220 181,182,183,184 Ethernet220 +Ethernet224 205,206,207,208 Ethernet224 +Ethernet228 197,198,199,200 Ethernet228 +Ethernet232 221,222,223,224 Ethernet232 +Ethernet236 213,214,215,216 Ethernet236 +Ethernet240 237,238,239,240 Ethernet240 +Ethernet244 229,230,231,232 Ethernet244 +Ethernet248 253,254,255,256 Ethernet248 +Ethernet252 245,246,247,248 Ethernet252 diff --git a/device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/sai.profile b/device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/sai.profile new file mode 100644 index 000000000000..74c0e88255c0 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/sai.profile @@ -0,0 +1,2 @@ +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th2-d7264q28b-64x100g.config.bcm +SAI_NUM_ECMP_MEMBERS=32 diff --git a/device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/th2-d7264q28b-64x100g.config.bcm b/device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/th2-d7264q28b-64x100g.config.bcm new file mode 100644 index 000000000000..8ca378382c93 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7264q28b-r0/INVENTEC-D7264Q28B/th2-d7264q28b-64x100g.config.bcm @@ -0,0 +1,841 @@ +# Sequoia BCM Shell config / 100G * 64 ports + +core_clock_frequency=1700 +dpp_clock_ratio=2:3 +load_firmware=1 +# EagleCore ports: xe0 & xe1 +portmap_66=257:10 +portmap_100=259:10 + +# Loopback ports +portmap_33=260:10 +portmap_67=261:10 +portmap_101=262:10 +portmap_135=263:10 + +# 64 ports config for 100G +# For Tomahawk FalconCore: +# Physical ports in FalconCore[0 - 15] must map to logical port[1 - 32] at any order +# Physical ports in FalconCore[16 - 31] must map to logical port[34 - 65] at any order +# Physical ports in FalconCore[32 - 47] must map to logical port[68 - 99] at any order +# Physical ports in FalconCore[48 - 63] must map to logical port[102 - 133] at any order + +## FalconCore[0 - 15] +portmap_1=9:100 +portmap_2=1:100 +portmap_3=13:100 +portmap_4=5:100 +portmap_5=25:100 +portmap_6=17:100 +portmap_7=29:100 +portmap_8=21:100 +portmap_9=41:100 +portmap_10=33:100 +portmap_11=45:100 +portmap_12=37:100 +portmap_13=57:100 +portmap_14=49:100 +portmap_15=61:100 +portmap_16=53:100 + +## FalconCore[16 - 31] +portmap_34=73:100 +portmap_35=65:100 +portmap_36=77:100 +portmap_37=69:100 +portmap_38=89:100 +portmap_39=81:100 +portmap_40=93:100 +portmap_41=85:100 +portmap_42=105:100 +portmap_43=97:100 +portmap_44=109:100 +portmap_45=101:100 +portmap_46=121:100 +portmap_47=113:100 +portmap_48=125:100 +portmap_49=117:100 + +## FalconCore[32-47] +portmap_68=137:100 +portmap_69=129:100 +portmap_70=141:100 +portmap_71=133:100 +portmap_72=153:100 +portmap_73=145:100 +portmap_74=157:100 +portmap_75=149:100 +portmap_76=169:100 +portmap_77=161:100 +portmap_78=173:100 +portmap_79=165:100 +portmap_80=185:100 +portmap_81=177:100 +portmap_82=189:100 +portmap_83=181:100 + +## FalconCore[48-63] +portmap_102=201:100 +portmap_103=193:100 +portmap_104=205:100 +portmap_105=197:100 +portmap_106=217:100 +portmap_107=209:100 +portmap_108=221:100 +portmap_109=213:100 +portmap_110=233:100 +portmap_111=225:100 +portmap_112=237:100 +portmap_113=229:100 +portmap_114=249:100 +portmap_115=241:100 +portmap_116=253:100 +portmap_117=245:100 + +pbmp_xport_xe=0x3FFFD0000FFFF40003FFFC0001FFFE +oversubscribe_mode=1 +l2_mem_entries=73728 +l3_mem_entries=73728 +fpem_mem_entries=65536 +l2xmsg_mode=1 + +## FalconCore [0-15] port TX Lane Swapping +phy_chain_tx_lane_map_physical{1.0}=0x3201 +phy_chain_tx_lane_map_physical{5.0}=0x3210 +phy_chain_tx_lane_map_physical{9.0}=0x2301 +phy_chain_tx_lane_map_physical{13.0}=0x3210 +phy_chain_tx_lane_map_physical{17.0}=0x3201 +phy_chain_tx_lane_map_physical{21.0}=0x3201 +phy_chain_tx_lane_map_physical{25.0}=0x3201 +phy_chain_tx_lane_map_physical{29.0}=0x3210 +phy_chain_tx_lane_map_physical{33.0}=0x3201 +phy_chain_tx_lane_map_physical{37.0}=0x3210 +phy_chain_tx_lane_map_physical{41.0}=0x3210 +phy_chain_tx_lane_map_physical{45.0}=0x3210 +phy_chain_tx_lane_map_physical{49.0}=0x3201 +phy_chain_tx_lane_map_physical{53.0}=0x3210 +phy_chain_tx_lane_map_physical{57.0}=0x3210 +phy_chain_tx_lane_map_physical{61.0}=0x3210 + + +## FalconCore [16-31] port TX Lane Swapping +phy_chain_tx_lane_map_physical{65.0}=0x3210 +phy_chain_tx_lane_map_physical{69.0}=0x3201 +phy_chain_tx_lane_map_physical{73.0}=0x3210 +phy_chain_tx_lane_map_physical{77.0}=0x3210 +phy_chain_tx_lane_map_physical{81.0}=0x3210 +phy_chain_tx_lane_map_physical{85.0}=0x3210 +phy_chain_tx_lane_map_physical{89.0}=0x3210 +phy_chain_tx_lane_map_physical{93.0}=0x3210 +phy_chain_tx_lane_map_physical{97.0}=0x3210 +phy_chain_tx_lane_map_physical{101.0}=0x2310 +phy_chain_tx_lane_map_physical{105.0}=0x2310 +phy_chain_tx_lane_map_physical{109.0}=0x3210 +phy_chain_tx_lane_map_physical{113.0}=0x3210 +phy_chain_tx_lane_map_physical{117.0}=0x2310 +phy_chain_tx_lane_map_physical{121.0}=0x2310 +phy_chain_tx_lane_map_physical{125.0}=0x3210 + + +## FalconCore [32-47] port TX Lane Swapping +phy_chain_tx_lane_map_physical{129.0}=0x2301 +phy_chain_tx_lane_map_physical{133.0}=0x3210 +phy_chain_tx_lane_map_physical{137.0}=0x2301 +phy_chain_tx_lane_map_physical{141.0}=0x3210 +phy_chain_tx_lane_map_physical{145.0}=0x2301 +phy_chain_tx_lane_map_physical{149.0}=0x3210 +phy_chain_tx_lane_map_physical{153.0}=0x3210 +phy_chain_tx_lane_map_physical{157.0}=0x3210 +phy_chain_tx_lane_map_physical{161.0}=0x2310 +phy_chain_tx_lane_map_physical{165.0}=0x2310 +phy_chain_tx_lane_map_physical{169.0}=0x2310 +phy_chain_tx_lane_map_physical{173.0}=0x3210 +phy_chain_tx_lane_map_physical{177.0}=0x3210 +phy_chain_tx_lane_map_physical{181.0}=0x2310 +phy_chain_tx_lane_map_physical{185.0}=0x3210 +phy_chain_tx_lane_map_physical{189.0}=0x2310 + + +## FalconCore [48-63] port TX Lane Swapping +phy_chain_tx_lane_map_physical{193.0}=0x2310 +phy_chain_tx_lane_map_physical{197.0}=0x2310 +phy_chain_tx_lane_map_physical{201.0}=0x2310 +phy_chain_tx_lane_map_physical{205.0}=0x2310 +phy_chain_tx_lane_map_physical{209.0}=0x3210 +phy_chain_tx_lane_map_physical{213.0}=0x2310 +phy_chain_tx_lane_map_physical{217.0}=0x3210 +phy_chain_tx_lane_map_physical{221.0}=0x2301 +phy_chain_tx_lane_map_physical{225.0}=0x3210 +phy_chain_tx_lane_map_physical{229.0}=0x2310 +phy_chain_tx_lane_map_physical{233.0}=0x2310 +phy_chain_tx_lane_map_physical{237.0}=0x1023 +phy_chain_tx_lane_map_physical{241.0}=0x3210 +phy_chain_tx_lane_map_physical{245.0}=0x2310 +phy_chain_tx_lane_map_physical{249.0}=0x3210 +phy_chain_tx_lane_map_physical{253.0}=0x2310 + +## FalconCore [0-15] port RX Lane Swapping +phy_chain_rx_lane_map_physical{1.0}=0x3210 +phy_chain_rx_lane_map_physical{5.0}=0x3210 +phy_chain_rx_lane_map_physical{9.0}=0x3210 +phy_chain_rx_lane_map_physical{13.0}=0x3210 +phy_chain_rx_lane_map_physical{17.0}=0x2310 +phy_chain_rx_lane_map_physical{21.0}=0x0213 +phy_chain_rx_lane_map_physical{25.0}=0x2310 +phy_chain_rx_lane_map_physical{29.0}=0x3210 +phy_chain_rx_lane_map_physical{33.0}=0x3210 +phy_chain_rx_lane_map_physical{37.0}=0x3210 +phy_chain_rx_lane_map_physical{41.0}=0x3210 +phy_chain_rx_lane_map_physical{45.0}=0x3210 +phy_chain_rx_lane_map_physical{49.0}=0x3210 +phy_chain_rx_lane_map_physical{53.0}=0x3210 +phy_chain_rx_lane_map_physical{57.0}=0x3210 +phy_chain_rx_lane_map_physical{61.0}=0x3210 + + +## FalconCore [16-31] port RX Lane Swapping +phy_chain_rx_lane_map_physical{65.0}=0x3210 +phy_chain_rx_lane_map_physical{69.0}=0x3210 +phy_chain_rx_lane_map_physical{73.0}=0x3210 +phy_chain_rx_lane_map_physical{77.0}=0x3210 +phy_chain_rx_lane_map_physical{81.0}=0x3210 +phy_chain_rx_lane_map_physical{85.0}=0x3210 +phy_chain_rx_lane_map_physical{89.0}=0x3210 +phy_chain_rx_lane_map_physical{93.0}=0x3210 +phy_chain_rx_lane_map_physical{97.0}=0x3210 +phy_chain_rx_lane_map_physical{101.0}=0x3201 +phy_chain_rx_lane_map_physical{105.0}=0x3210 +phy_chain_rx_lane_map_physical{109.0}=0x3210 +phy_chain_rx_lane_map_physical{113.0}=0x3210 +phy_chain_rx_lane_map_physical{117.0}=0x3210 +phy_chain_rx_lane_map_physical{121.0}=0x3210 +phy_chain_rx_lane_map_physical{125.0}=0x3210 + + +## FalconCore [32-47] port RX Lane Swapping +phy_chain_rx_lane_map_physical{129.0}=0x3210 +phy_chain_rx_lane_map_physical{133.0}=0x2301 +phy_chain_rx_lane_map_physical{137.0}=0x3210 +phy_chain_rx_lane_map_physical{141.0}=0x2310 +phy_chain_rx_lane_map_physical{145.0}=0x3210 +phy_chain_rx_lane_map_physical{149.0}=0x3210 +phy_chain_rx_lane_map_physical{153.0}=0x3210 +phy_chain_rx_lane_map_physical{157.0}=0x3210 +phy_chain_rx_lane_map_physical{161.0}=0x3210 +phy_chain_rx_lane_map_physical{165.0}=0x3210 +phy_chain_rx_lane_map_physical{169.0}=0x3210 +phy_chain_rx_lane_map_physical{173.0}=0x3210 +phy_chain_rx_lane_map_physical{177.0}=0x3210 +phy_chain_rx_lane_map_physical{181.0}=0x3210 +phy_chain_rx_lane_map_physical{185.0}=0x3210 +phy_chain_rx_lane_map_physical{189.0}=0x3210 + + +## FalconCore [48-63] port RX Lan Swapping +phy_chain_rx_lane_map_physical{193.0}=0x3210 +phy_chain_rx_lane_map_physical{197.0}=0x3210 +phy_chain_rx_lane_map_physical{201.0}=0x3210 +phy_chain_rx_lane_map_physical{205.0}=0x3210 +phy_chain_rx_lane_map_physical{209.0}=0x3210 +phy_chain_rx_lane_map_physical{213.0}=0x3210 +phy_chain_rx_lane_map_physical{217.0}=0x3210 +phy_chain_rx_lane_map_physical{221.0}=0x3210 +phy_chain_rx_lane_map_physical{225.0}=0x3210 +phy_chain_rx_lane_map_physical{229.0}=0x2301 +phy_chain_rx_lane_map_physical{233.0}=0x3210 +phy_chain_rx_lane_map_physical{237.0}=0x1023 +phy_chain_rx_lane_map_physical{241.0}=0x3210 +phy_chain_rx_lane_map_physical{245.0}=0x3210 +phy_chain_rx_lane_map_physical{249.0}=0x3210 +phy_chain_rx_lane_map_physical{253.0}=0x3210 + + +## FalconCore[0-15] ports TX polarity flip +phy_chain_tx_polarity_flip_physical{1.0}=0x1 +phy_chain_tx_polarity_flip_physical{2.0}=0x1 +phy_chain_tx_polarity_flip_physical{3.0}=0x0 +phy_chain_tx_polarity_flip_physical{4.0}=0x1 +phy_chain_tx_polarity_flip_physical{5.0}=0x0 +phy_chain_tx_polarity_flip_physical{6.0}=0x0 +phy_chain_tx_polarity_flip_physical{7.0}=0x0 +phy_chain_tx_polarity_flip_physical{8.0}=0x0 +phy_chain_tx_polarity_flip_physical{9.0}=0x0 +phy_chain_tx_polarity_flip_physical{10.0}=0x1 +phy_chain_tx_polarity_flip_physical{11.0}=0x0 +phy_chain_tx_polarity_flip_physical{12.0}=0x0 +phy_chain_tx_polarity_flip_physical{13.0}=0x0 +phy_chain_tx_polarity_flip_physical{14.0}=0x0 +phy_chain_tx_polarity_flip_physical{15.0}=0x0 +phy_chain_tx_polarity_flip_physical{16.0}=0x0 +phy_chain_tx_polarity_flip_physical{17.0}=0x0 +phy_chain_tx_polarity_flip_physical{18.0}=0x1 +phy_chain_tx_polarity_flip_physical{19.0}=0x1 +phy_chain_tx_polarity_flip_physical{20.0}=0x0 +phy_chain_tx_polarity_flip_physical{21.0}=0x0 +phy_chain_tx_polarity_flip_physical{22.0}=0x0 +phy_chain_tx_polarity_flip_physical{23.0}=0x0 +phy_chain_tx_polarity_flip_physical{24.0}=0x0 +phy_chain_tx_polarity_flip_physical{25.0}=0x0 +phy_chain_tx_polarity_flip_physical{26.0}=0x1 +phy_chain_tx_polarity_flip_physical{27.0}=0x0 +phy_chain_tx_polarity_flip_physical{28.0}=0x0 +phy_chain_tx_polarity_flip_physical{29.0}=0x0 +phy_chain_tx_polarity_flip_physical{30.0}=0x0 +phy_chain_tx_polarity_flip_physical{31.0}=0x0 +phy_chain_tx_polarity_flip_physical{32.0}=0x0 +phy_chain_tx_polarity_flip_physical{33.0}=0x1 +phy_chain_tx_polarity_flip_physical{34.0}=0x0 +phy_chain_tx_polarity_flip_physical{35.0}=0x1 +phy_chain_tx_polarity_flip_physical{36.0}=0x0 +phy_chain_tx_polarity_flip_physical{37.0}=0x0 +phy_chain_tx_polarity_flip_physical{38.0}=0x0 +phy_chain_tx_polarity_flip_physical{39.0}=0x0 +phy_chain_tx_polarity_flip_physical{40.0}=0x0 +phy_chain_tx_polarity_flip_physical{41.0}=0x1 +phy_chain_tx_polarity_flip_physical{42.0}=0x0 +phy_chain_tx_polarity_flip_physical{43.0}=0x1 +phy_chain_tx_polarity_flip_physical{44.0}=0x0 +phy_chain_tx_polarity_flip_physical{45.0}=0x0 +phy_chain_tx_polarity_flip_physical{46.0}=0x0 +phy_chain_tx_polarity_flip_physical{47.0}=0x0 +phy_chain_tx_polarity_flip_physical{48.0}=0x0 +phy_chain_tx_polarity_flip_physical{49.0}=0x0 +phy_chain_tx_polarity_flip_physical{50.0}=0x0 +phy_chain_tx_polarity_flip_physical{51.0}=0x0 +phy_chain_tx_polarity_flip_physical{52.0}=0x0 +phy_chain_tx_polarity_flip_physical{53.0}=0x0 +phy_chain_tx_polarity_flip_physical{54.0}=0x0 +phy_chain_tx_polarity_flip_physical{55.0}=0x0 +phy_chain_tx_polarity_flip_physical{56.0}=0x0 +phy_chain_tx_polarity_flip_physical{57.0}=0x1 +phy_chain_tx_polarity_flip_physical{58.0}=0x0 +phy_chain_tx_polarity_flip_physical{59.0}=0x0 +phy_chain_tx_polarity_flip_physical{60.0}=0x0 +phy_chain_tx_polarity_flip_physical{61.0}=0x0 +phy_chain_tx_polarity_flip_physical{62.0}=0x0 +phy_chain_tx_polarity_flip_physical{63.0}=0x0 +phy_chain_tx_polarity_flip_physical{64.0}=0x0 + +## FalconCore[16-31] ports TX polarity flip +phy_chain_tx_polarity_flip_physical{65.0}=0x1 +phy_chain_tx_polarity_flip_physical{66.0}=0x0 +phy_chain_tx_polarity_flip_physical{67.0}=0x0 +phy_chain_tx_polarity_flip_physical{68.0}=0x0 +phy_chain_tx_polarity_flip_physical{69.0}=0x0 +phy_chain_tx_polarity_flip_physical{70.0}=0x1 +phy_chain_tx_polarity_flip_physical{71.0}=0x0 +phy_chain_tx_polarity_flip_physical{72.0}=0x0 +phy_chain_tx_polarity_flip_physical{73.0}=0x0 +phy_chain_tx_polarity_flip_physical{74.0}=0x0 +phy_chain_tx_polarity_flip_physical{75.0}=0x0 +phy_chain_tx_polarity_flip_physical{76.0}=0x0 +phy_chain_tx_polarity_flip_physical{77.0}=0x1 +phy_chain_tx_polarity_flip_physical{78.0}=0x0 +phy_chain_tx_polarity_flip_physical{79.0}=0x0 +phy_chain_tx_polarity_flip_physical{80.0}=0x0 +phy_chain_tx_polarity_flip_physical{81.0}=0x0 +phy_chain_tx_polarity_flip_physical{82.0}=0x0 +phy_chain_tx_polarity_flip_physical{83.0}=0x0 +phy_chain_tx_polarity_flip_physical{84.0}=0x0 +phy_chain_tx_polarity_flip_physical{85.0}=0x0 +phy_chain_tx_polarity_flip_physical{86.0}=0x1 +phy_chain_tx_polarity_flip_physical{87.0}=0x0 +phy_chain_tx_polarity_flip_physical{88.0}=0x0 +phy_chain_tx_polarity_flip_physical{89.0}=0x1 +phy_chain_tx_polarity_flip_physical{90.0}=0x0 +phy_chain_tx_polarity_flip_physical{91.0}=0x0 +phy_chain_tx_polarity_flip_physical{92.0}=0x0 +phy_chain_tx_polarity_flip_physical{93.0}=0x1 +phy_chain_tx_polarity_flip_physical{94.0}=0x0 +phy_chain_tx_polarity_flip_physical{95.0}=0x0 +phy_chain_tx_polarity_flip_physical{96.0}=0x0 +phy_chain_tx_polarity_flip_physical{97.0}=0x1 +phy_chain_tx_polarity_flip_physical{98.0}=0x0 +phy_chain_tx_polarity_flip_physical{99.0}=0x0 +phy_chain_tx_polarity_flip_physical{100.0}=0x0 +phy_chain_tx_polarity_flip_physical{101.0}=0x0 +phy_chain_tx_polarity_flip_physical{102.0}=0x0 +phy_chain_tx_polarity_flip_physical{103.0}=0x0 +phy_chain_tx_polarity_flip_physical{104.0}=0x0 +phy_chain_tx_polarity_flip_physical{105.0}=0x1 +phy_chain_tx_polarity_flip_physical{106.0}=0x0 +phy_chain_tx_polarity_flip_physical{107.0}=0x0 +phy_chain_tx_polarity_flip_physical{108.0}=0x0 +phy_chain_tx_polarity_flip_physical{109.0}=0x0 +phy_chain_tx_polarity_flip_physical{110.0}=0x0 +phy_chain_tx_polarity_flip_physical{111.0}=0x0 +phy_chain_tx_polarity_flip_physical{112.0}=0x0 +phy_chain_tx_polarity_flip_physical{113.0}=0x0 +phy_chain_tx_polarity_flip_physical{114.0}=0x1 +phy_chain_tx_polarity_flip_physical{115.0}=0x0 +phy_chain_tx_polarity_flip_physical{116.0}=0x0 +phy_chain_tx_polarity_flip_physical{117.0}=0x0 +phy_chain_tx_polarity_flip_physical{118.0}=0x0 +phy_chain_tx_polarity_flip_physical{119.0}=0x0 +phy_chain_tx_polarity_flip_physical{120.0}=0x0 +phy_chain_tx_polarity_flip_physical{121.0}=0x1 +phy_chain_tx_polarity_flip_physical{122.0}=0x0 +phy_chain_tx_polarity_flip_physical{123.0}=0x0 +phy_chain_tx_polarity_flip_physical{124.0}=0x0 +phy_chain_tx_polarity_flip_physical{125.0}=0x0 +phy_chain_tx_polarity_flip_physical{126.0}=0x0 +phy_chain_tx_polarity_flip_physical{127.0}=0x0 +phy_chain_tx_polarity_flip_physical{128.0}=0x0 + +## FalconCore[32-47] ports TX polarity flip +phy_chain_tx_polarity_flip_physical{129.0}=0x0 +phy_chain_tx_polarity_flip_physical{130.0}=0x0 +phy_chain_tx_polarity_flip_physical{131.0}=0x0 +phy_chain_tx_polarity_flip_physical{132.0}=0x0 +phy_chain_tx_polarity_flip_physical{133.0}=0x0 +phy_chain_tx_polarity_flip_physical{134.0}=0x0 +phy_chain_tx_polarity_flip_physical{135.0}=0x0 +phy_chain_tx_polarity_flip_physical{136.0}=0x0 +phy_chain_tx_polarity_flip_physical{137.0}=0x0 +phy_chain_tx_polarity_flip_physical{138.0}=0x1 +phy_chain_tx_polarity_flip_physical{139.0}=0x0 +phy_chain_tx_polarity_flip_physical{140.0}=0x0 +phy_chain_tx_polarity_flip_physical{141.0}=0x0 +phy_chain_tx_polarity_flip_physical{142.0}=0x0 +phy_chain_tx_polarity_flip_physical{143.0}=0x0 +phy_chain_tx_polarity_flip_physical{144.0}=0x0 +phy_chain_tx_polarity_flip_physical{145.0}=0x1 +phy_chain_tx_polarity_flip_physical{146.0}=0x0 +phy_chain_tx_polarity_flip_physical{147.0}=0x0 +phy_chain_tx_polarity_flip_physical{148.0}=0x0 +phy_chain_tx_polarity_flip_physical{149.0}=0x0 +phy_chain_tx_polarity_flip_physical{150.0}=0x0 +phy_chain_tx_polarity_flip_physical{151.0}=0x0 +phy_chain_tx_polarity_flip_physical{152.0}=0x0 +phy_chain_tx_polarity_flip_physical{153.0}=0x0 +phy_chain_tx_polarity_flip_physical{154.0}=0x1 +phy_chain_tx_polarity_flip_physical{155.0}=0x0 +phy_chain_tx_polarity_flip_physical{156.0}=0x0 +phy_chain_tx_polarity_flip_physical{157.0}=0x0 +phy_chain_tx_polarity_flip_physical{158.0}=0x0 +phy_chain_tx_polarity_flip_physical{159.0}=0x0 +phy_chain_tx_polarity_flip_physical{160.0}=0x0 +phy_chain_tx_polarity_flip_physical{161.0}=0x1 +phy_chain_tx_polarity_flip_physical{162.0}=0x0 +phy_chain_tx_polarity_flip_physical{163.0}=0x0 +phy_chain_tx_polarity_flip_physical{164.0}=0x0 +phy_chain_tx_polarity_flip_physical{165.0}=0x0 +phy_chain_tx_polarity_flip_physical{166.0}=0x0 +phy_chain_tx_polarity_flip_physical{167.0}=0x0 +phy_chain_tx_polarity_flip_physical{168.0}=0x0 +phy_chain_tx_polarity_flip_physical{169.0}=0x0 +phy_chain_tx_polarity_flip_physical{170.0}=0x1 +phy_chain_tx_polarity_flip_physical{171.0}=0x0 +phy_chain_tx_polarity_flip_physical{172.0}=0x0 +phy_chain_tx_polarity_flip_physical{173.0}=0x0 +phy_chain_tx_polarity_flip_physical{174.0}=0x0 +phy_chain_tx_polarity_flip_physical{175.0}=0x0 +phy_chain_tx_polarity_flip_physical{176.0}=0x0 +phy_chain_tx_polarity_flip_physical{177.0}=0x0 +phy_chain_tx_polarity_flip_physical{178.0}=0x1 +phy_chain_tx_polarity_flip_physical{179.0}=0x0 +phy_chain_tx_polarity_flip_physical{180.0}=0x0 +phy_chain_tx_polarity_flip_physical{181.0}=0x0 +phy_chain_tx_polarity_flip_physical{182.0}=0x0 +phy_chain_tx_polarity_flip_physical{183.0}=0x0 +phy_chain_tx_polarity_flip_physical{184.0}=0x0 +phy_chain_tx_polarity_flip_physical{185.0}=0x0 +phy_chain_tx_polarity_flip_physical{186.0}=0x0 +phy_chain_tx_polarity_flip_physical{187.0}=0x0 +phy_chain_tx_polarity_flip_physical{188.0}=0x0 +phy_chain_tx_polarity_flip_physical{189.0}=0x0 +phy_chain_tx_polarity_flip_physical{190.0}=0x0 +phy_chain_tx_polarity_flip_physical{191.0}=0x0 +phy_chain_tx_polarity_flip_physical{192.0}=0x0 + +## FalconCore[48-63] ports TX polarity flip +phy_chain_tx_polarity_flip_physical{193.0}=0x1 +phy_chain_tx_polarity_flip_physical{194.0}=0x0 +phy_chain_tx_polarity_flip_physical{195.0}=0x0 +phy_chain_tx_polarity_flip_physical{196.0}=0x0 +phy_chain_tx_polarity_flip_physical{197.0}=0x0 +phy_chain_tx_polarity_flip_physical{198.0}=0x0 +phy_chain_tx_polarity_flip_physical{199.0}=0x0 +phy_chain_tx_polarity_flip_physical{200.0}=0x0 +phy_chain_tx_polarity_flip_physical{201.0}=0x0 +phy_chain_tx_polarity_flip_physical{202.0}=0x1 +phy_chain_tx_polarity_flip_physical{203.0}=0x0 +phy_chain_tx_polarity_flip_physical{204.0}=0x0 +phy_chain_tx_polarity_flip_physical{205.0}=0x0 +phy_chain_tx_polarity_flip_physical{206.0}=0x0 +phy_chain_tx_polarity_flip_physical{207.0}=0x0 +phy_chain_tx_polarity_flip_physical{208.0}=0x0 +phy_chain_tx_polarity_flip_physical{209.0}=0x0 +phy_chain_tx_polarity_flip_physical{210.0}=0x0 +phy_chain_tx_polarity_flip_physical{211.0}=0x0 +phy_chain_tx_polarity_flip_physical{212.0}=0x0 +phy_chain_tx_polarity_flip_physical{213.0}=0x0 +phy_chain_tx_polarity_flip_physical{214.0}=0x0 +phy_chain_tx_polarity_flip_physical{215.0}=0x0 +phy_chain_tx_polarity_flip_physical{216.0}=0x0 +phy_chain_tx_polarity_flip_physical{217.0}=0x1 +phy_chain_tx_polarity_flip_physical{218.0}=0x0 +phy_chain_tx_polarity_flip_physical{219.0}=0x0 +phy_chain_tx_polarity_flip_physical{220.0}=0x0 +phy_chain_tx_polarity_flip_physical{221.0}=0x0 +phy_chain_tx_polarity_flip_physical{222.0}=0x0 +phy_chain_tx_polarity_flip_physical{223.0}=0x0 +phy_chain_tx_polarity_flip_physical{224.0}=0x0 +phy_chain_tx_polarity_flip_physical{225.0}=0x1 +phy_chain_tx_polarity_flip_physical{226.0}=0x0 +phy_chain_tx_polarity_flip_physical{227.0}=0x0 +phy_chain_tx_polarity_flip_physical{228.0}=0x0 +phy_chain_tx_polarity_flip_physical{229.0}=0x0 +phy_chain_tx_polarity_flip_physical{230.0}=0x0 +phy_chain_tx_polarity_flip_physical{231.0}=0x0 +phy_chain_tx_polarity_flip_physical{232.0}=0x0 +phy_chain_tx_polarity_flip_physical{233.0}=0x1 +phy_chain_tx_polarity_flip_physical{234.0}=0x0 +phy_chain_tx_polarity_flip_physical{235.0}=0x0 +phy_chain_tx_polarity_flip_physical{236.0}=0x0 +phy_chain_tx_polarity_flip_physical{237.0}=0x0 +phy_chain_tx_polarity_flip_physical{238.0}=0x0 +phy_chain_tx_polarity_flip_physical{239.0}=0x0 +phy_chain_tx_polarity_flip_physical{240.0}=0x0 +phy_chain_tx_polarity_flip_physical{241.0}=0x1 +phy_chain_tx_polarity_flip_physical{242.0}=0x0 +phy_chain_tx_polarity_flip_physical{243.0}=0x0 +phy_chain_tx_polarity_flip_physical{244.0}=0x0 +phy_chain_tx_polarity_flip_physical{245.0}=0x0 +phy_chain_tx_polarity_flip_physical{246.0}=0x0 +phy_chain_tx_polarity_flip_physical{247.0}=0x0 +phy_chain_tx_polarity_flip_physical{248.0}=0x1 +phy_chain_tx_polarity_flip_physical{249.0}=0x1 +phy_chain_tx_polarity_flip_physical{250.0}=0x0 +phy_chain_tx_polarity_flip_physical{251.0}=0x0 +phy_chain_tx_polarity_flip_physical{252.0}=0x0 +phy_chain_tx_polarity_flip_physical{253.0}=0x0 +phy_chain_tx_polarity_flip_physical{254.0}=0x0 +phy_chain_tx_polarity_flip_physical{255.0}=0x0 +phy_chain_tx_polarity_flip_physical{256.0}=0x1 + +## FalconCore[0-15] ports RX polarity flip +phy_chain_rx_polarity_flip_physical{1.0}=0x0 +phy_chain_rx_polarity_flip_physical{2.0}=0x0 +phy_chain_rx_polarity_flip_physical{3.0}=0x0 +phy_chain_rx_polarity_flip_physical{4.0}=0x0 +phy_chain_rx_polarity_flip_physical{5.0}=0x0 +phy_chain_rx_polarity_flip_physical{6.0}=0x0 +phy_chain_rx_polarity_flip_physical{7.0}=0x0 +phy_chain_rx_polarity_flip_physical{8.0}=0x0 +phy_chain_rx_polarity_flip_physical{9.0}=0x0 +phy_chain_rx_polarity_flip_physical{10.0}=0x0 +phy_chain_rx_polarity_flip_physical{11.0}=0x0 +phy_chain_rx_polarity_flip_physical{12.0}=0x0 +phy_chain_rx_polarity_flip_physical{13.0}=0x0 +phy_chain_rx_polarity_flip_physical{14.0}=0x0 +phy_chain_rx_polarity_flip_physical{15.0}=0x0 +phy_chain_rx_polarity_flip_physical{16.0}=0x0 +phy_chain_rx_polarity_flip_physical{17.0}=0x0 +phy_chain_rx_polarity_flip_physical{18.0}=0x0 +phy_chain_rx_polarity_flip_physical{19.0}=0x0 +phy_chain_rx_polarity_flip_physical{20.0}=0x1 +phy_chain_rx_polarity_flip_physical{21.0}=0x0 +phy_chain_rx_polarity_flip_physical{22.0}=0x0 +phy_chain_rx_polarity_flip_physical{23.0}=0x0 +phy_chain_rx_polarity_flip_physical{24.0}=0x0 +phy_chain_rx_polarity_flip_physical{25.0}=0x0 +phy_chain_rx_polarity_flip_physical{26.0}=0x0 +phy_chain_rx_polarity_flip_physical{27.0}=0x0 +phy_chain_rx_polarity_flip_physical{28.0}=0x1 +phy_chain_rx_polarity_flip_physical{29.0}=0x0 +phy_chain_rx_polarity_flip_physical{30.0}=0x0 +phy_chain_rx_polarity_flip_physical{31.0}=0x0 +phy_chain_rx_polarity_flip_physical{32.0}=0x0 +phy_chain_rx_polarity_flip_physical{33.0}=0x0 +phy_chain_rx_polarity_flip_physical{34.0}=0x0 +phy_chain_rx_polarity_flip_physical{35.0}=0x0 +phy_chain_rx_polarity_flip_physical{36.0}=0x0 +phy_chain_rx_polarity_flip_physical{37.0}=0x0 +phy_chain_rx_polarity_flip_physical{38.0}=0x0 +phy_chain_rx_polarity_flip_physical{39.0}=0x0 +phy_chain_rx_polarity_flip_physical{40.0}=0x0 +phy_chain_rx_polarity_flip_physical{41.0}=0x0 +phy_chain_rx_polarity_flip_physical{42.0}=0x0 +phy_chain_rx_polarity_flip_physical{43.0}=0x0 +phy_chain_rx_polarity_flip_physical{44.0}=0x0 +phy_chain_rx_polarity_flip_physical{45.0}=0x0 +phy_chain_rx_polarity_flip_physical{46.0}=0x0 +phy_chain_rx_polarity_flip_physical{47.0}=0x0 +phy_chain_rx_polarity_flip_physical{48.0}=0x0 +phy_chain_rx_polarity_flip_physical{49.0}=0x0 +phy_chain_rx_polarity_flip_physical{50.0}=0x0 +phy_chain_rx_polarity_flip_physical{51.0}=0x0 +phy_chain_rx_polarity_flip_physical{52.0}=0x0 +phy_chain_rx_polarity_flip_physical{53.0}=0x0 +phy_chain_rx_polarity_flip_physical{54.0}=0x0 +phy_chain_rx_polarity_flip_physical{55.0}=0x0 +phy_chain_rx_polarity_flip_physical{56.0}=0x0 +phy_chain_rx_polarity_flip_physical{57.0}=0x0 +phy_chain_rx_polarity_flip_physical{58.0}=0x0 +phy_chain_rx_polarity_flip_physical{59.0}=0x0 +phy_chain_rx_polarity_flip_physical{60.0}=0x0 +phy_chain_rx_polarity_flip_physical{61.0}=0x0 +phy_chain_rx_polarity_flip_physical{62.0}=0x0 +phy_chain_rx_polarity_flip_physical{63.0}=0x0 +phy_chain_rx_polarity_flip_physical{64.0}=0x0 + +## FalconCore [16-31] ports RX polarity flip +phy_chain_rx_polarity_flip_physical{65.0}=0x0 +phy_chain_rx_polarity_flip_physical{66.0}=0x0 +phy_chain_rx_polarity_flip_physical{67.0}=0x0 +phy_chain_rx_polarity_flip_physical{68.0}=0x0 +phy_chain_rx_polarity_flip_physical{69.0}=0x0 +phy_chain_rx_polarity_flip_physical{70.0}=0x0 +phy_chain_rx_polarity_flip_physical{71.0}=0x0 +phy_chain_rx_polarity_flip_physical{72.0}=0x1 +phy_chain_rx_polarity_flip_physical{73.0}=0x0 +phy_chain_rx_polarity_flip_physical{74.0}=0x0 +phy_chain_rx_polarity_flip_physical{75.0}=0x0 +phy_chain_rx_polarity_flip_physical{76.0}=0x0 +phy_chain_rx_polarity_flip_physical{77.0}=0x0 +phy_chain_rx_polarity_flip_physical{78.0}=0x0 +phy_chain_rx_polarity_flip_physical{79.0}=0x1 +phy_chain_rx_polarity_flip_physical{80.0}=0x0 +phy_chain_rx_polarity_flip_physical{81.0}=0x0 +phy_chain_rx_polarity_flip_physical{82.0}=0x0 +phy_chain_rx_polarity_flip_physical{83.0}=0x0 +phy_chain_rx_polarity_flip_physical{84.0}=0x0 +phy_chain_rx_polarity_flip_physical{85.0}=0x0 +phy_chain_rx_polarity_flip_physical{86.0}=0x0 +phy_chain_rx_polarity_flip_physical{87.0}=0x0 +phy_chain_rx_polarity_flip_physical{88.0}=0x0 +phy_chain_rx_polarity_flip_physical{89.0}=0x0 +phy_chain_rx_polarity_flip_physical{90.0}=0x0 +phy_chain_rx_polarity_flip_physical{91.0}=0x0 +phy_chain_rx_polarity_flip_physical{92.0}=0x0 +phy_chain_rx_polarity_flip_physical{93.0}=0x0 +phy_chain_rx_polarity_flip_physical{94.0}=0x0 +phy_chain_rx_polarity_flip_physical{95.0}=0x0 +phy_chain_rx_polarity_flip_physical{96.0}=0x0 +phy_chain_rx_polarity_flip_physical{97.0}=0x0 +phy_chain_rx_polarity_flip_physical{98.0}=0x0 +phy_chain_rx_polarity_flip_physical{99.0}=0x0 +phy_chain_rx_polarity_flip_physical{100.0}=0x0 +phy_chain_rx_polarity_flip_physical{101.0}=0x0 +phy_chain_rx_polarity_flip_physical{102.0}=0x0 +phy_chain_rx_polarity_flip_physical{103.0}=0x0 +phy_chain_rx_polarity_flip_physical{104.0}=0x0 +phy_chain_rx_polarity_flip_physical{105.0}=0x0 +phy_chain_rx_polarity_flip_physical{106.0}=0x0 +phy_chain_rx_polarity_flip_physical{107.0}=0x0 +phy_chain_rx_polarity_flip_physical{108.0}=0x0 +phy_chain_rx_polarity_flip_physical{109.0}=0x0 +phy_chain_rx_polarity_flip_physical{110.0}=0x0 +phy_chain_rx_polarity_flip_physical{111.0}=0x0 +phy_chain_rx_polarity_flip_physical{112.0}=0x0 +phy_chain_rx_polarity_flip_physical{113.0}=0x0 +phy_chain_rx_polarity_flip_physical{114.0}=0x0 +phy_chain_rx_polarity_flip_physical{115.0}=0x0 +phy_chain_rx_polarity_flip_physical{116.0}=0x0 +phy_chain_rx_polarity_flip_physical{117.0}=0x0 +phy_chain_rx_polarity_flip_physical{118.0}=0x0 +phy_chain_rx_polarity_flip_physical{119.0}=0x0 +phy_chain_rx_polarity_flip_physical{120.0}=0x0 +phy_chain_rx_polarity_flip_physical{121.0}=0x0 +phy_chain_rx_polarity_flip_physical{122.0}=0x0 +phy_chain_rx_polarity_flip_physical{123.0}=0x0 +phy_chain_rx_polarity_flip_physical{124.0}=0x0 +phy_chain_rx_polarity_flip_physical{125.0}=0x0 +phy_chain_rx_polarity_flip_physical{126.0}=0x0 +phy_chain_rx_polarity_flip_physical{127.0}=0x0 +phy_chain_rx_polarity_flip_physical{128.0}=0x0 + +## FalconCore [32-47] ports RX polarity flip +phy_chain_rx_polarity_flip_physical{129.0}=0x0 +phy_chain_rx_polarity_flip_physical{130.0}=0x0 +phy_chain_rx_polarity_flip_physical{131.0}=0x0 +phy_chain_rx_polarity_flip_physical{132.0}=0x0 +phy_chain_rx_polarity_flip_physical{133.0}=0x0 +phy_chain_rx_polarity_flip_physical{134.0}=0x0 +phy_chain_rx_polarity_flip_physical{135.0}=0x0 +phy_chain_rx_polarity_flip_physical{136.0}=0x0 +phy_chain_rx_polarity_flip_physical{137.0}=0x0 +phy_chain_rx_polarity_flip_physical{138.0}=0x0 +phy_chain_rx_polarity_flip_physical{139.0}=0x0 +phy_chain_rx_polarity_flip_physical{140.0}=0x0 +phy_chain_rx_polarity_flip_physical{141.0}=0x0 +phy_chain_rx_polarity_flip_physical{142.0}=0x0 +phy_chain_rx_polarity_flip_physical{143.0}=0x0 +phy_chain_rx_polarity_flip_physical{144.0}=0x0 +phy_chain_rx_polarity_flip_physical{145.0}=0x0 +phy_chain_rx_polarity_flip_physical{146.0}=0x0 +phy_chain_rx_polarity_flip_physical{147.0}=0x0 +phy_chain_rx_polarity_flip_physical{148.0}=0x1 +phy_chain_rx_polarity_flip_physical{149.0}=0x0 +phy_chain_rx_polarity_flip_physical{150.0}=0x0 +phy_chain_rx_polarity_flip_physical{151.0}=0x0 +phy_chain_rx_polarity_flip_physical{152.0}=0x0 +phy_chain_rx_polarity_flip_physical{153.0}=0x0 +phy_chain_rx_polarity_flip_physical{154.0}=0x0 +phy_chain_rx_polarity_flip_physical{155.0}=0x0 +phy_chain_rx_polarity_flip_physical{156.0}=0x1 +phy_chain_rx_polarity_flip_physical{157.0}=0x0 +phy_chain_rx_polarity_flip_physical{158.0}=0x0 +phy_chain_rx_polarity_flip_physical{159.0}=0x0 +phy_chain_rx_polarity_flip_physical{160.0}=0x0 +phy_chain_rx_polarity_flip_physical{161.0}=0x0 +phy_chain_rx_polarity_flip_physical{162.0}=0x0 +phy_chain_rx_polarity_flip_physical{163.0}=0x0 +phy_chain_rx_polarity_flip_physical{164.0}=0x0 +phy_chain_rx_polarity_flip_physical{165.0}=0x0 +phy_chain_rx_polarity_flip_physical{166.0}=0x0 +phy_chain_rx_polarity_flip_physical{167.0}=0x0 +phy_chain_rx_polarity_flip_physical{168.0}=0x0 +phy_chain_rx_polarity_flip_physical{169.0}=0x0 +phy_chain_rx_polarity_flip_physical{170.0}=0x0 +phy_chain_rx_polarity_flip_physical{171.0}=0x0 +phy_chain_rx_polarity_flip_physical{172.0}=0x0 +phy_chain_rx_polarity_flip_physical{173.0}=0x0 +phy_chain_rx_polarity_flip_physical{174.0}=0x0 +phy_chain_rx_polarity_flip_physical{175.0}=0x0 +phy_chain_rx_polarity_flip_physical{176.0}=0x0 +phy_chain_rx_polarity_flip_physical{177.0}=0x0 +phy_chain_rx_polarity_flip_physical{178.0}=0x0 +phy_chain_rx_polarity_flip_physical{179.0}=0x0 +phy_chain_rx_polarity_flip_physical{180.0}=0x0 +phy_chain_rx_polarity_flip_physical{181.0}=0x0 +phy_chain_rx_polarity_flip_physical{182.0}=0x0 +phy_chain_rx_polarity_flip_physical{183.0}=0x0 +phy_chain_rx_polarity_flip_physical{184.0}=0x0 +phy_chain_rx_polarity_flip_physical{185.0}=0x0 +phy_chain_rx_polarity_flip_physical{186.0}=0x0 +phy_chain_rx_polarity_flip_physical{187.0}=0x1 +phy_chain_rx_polarity_flip_physical{188.0}=0x0 +phy_chain_rx_polarity_flip_physical{189.0}=0x0 +phy_chain_rx_polarity_flip_physical{190.0}=0x0 +phy_chain_rx_polarity_flip_physical{191.0}=0x0 +phy_chain_rx_polarity_flip_physical{192.0}=0x0 + +## FalconCore [48-63] ports RX polarity flip +phy_chain_rx_polarity_flip_physical{193.0}=0x0 +phy_chain_rx_polarity_flip_physical{194.0}=0x0 +phy_chain_rx_polarity_flip_physical{195.0}=0x0 +phy_chain_rx_polarity_flip_physical{196.0}=0x0 +phy_chain_rx_polarity_flip_physical{197.0}=0x0 +phy_chain_rx_polarity_flip_physical{198.0}=0x0 +phy_chain_rx_polarity_flip_physical{199.0}=0x0 +phy_chain_rx_polarity_flip_physical{200.0}=0x0 +phy_chain_rx_polarity_flip_physical{201.0}=0x0 +phy_chain_rx_polarity_flip_physical{202.0}=0x0 +phy_chain_rx_polarity_flip_physical{203.0}=0x0 +phy_chain_rx_polarity_flip_physical{204.0}=0x0 +phy_chain_rx_polarity_flip_physical{205.0}=0x0 +phy_chain_rx_polarity_flip_physical{206.0}=0x0 +phy_chain_rx_polarity_flip_physical{207.0}=0x0 +phy_chain_rx_polarity_flip_physical{208.0}=0x0 +phy_chain_rx_polarity_flip_physical{209.0}=0x0 +phy_chain_rx_polarity_flip_physical{210.0}=0x0 +phy_chain_rx_polarity_flip_physical{211.0}=0x1 +phy_chain_rx_polarity_flip_physical{212.0}=0x1 +phy_chain_rx_polarity_flip_physical{213.0}=0x0 +phy_chain_rx_polarity_flip_physical{214.0}=0x0 +phy_chain_rx_polarity_flip_physical{215.0}=0x0 +phy_chain_rx_polarity_flip_physical{216.0}=0x0 +phy_chain_rx_polarity_flip_physical{217.0}=0x0 +phy_chain_rx_polarity_flip_physical{218.0}=0x0 +phy_chain_rx_polarity_flip_physical{219.0}=0x1 +phy_chain_rx_polarity_flip_physical{220.0}=0x0 +phy_chain_rx_polarity_flip_physical{221.0}=0x0 +phy_chain_rx_polarity_flip_physical{222.0}=0x0 +phy_chain_rx_polarity_flip_physical{223.0}=0x0 +phy_chain_rx_polarity_flip_physical{224.0}=0x0 +phy_chain_rx_polarity_flip_physical{225.0}=0x0 +phy_chain_rx_polarity_flip_physical{226.0}=0x0 +phy_chain_rx_polarity_flip_physical{227.0}=0x0 +phy_chain_rx_polarity_flip_physical{228.0}=0x0 +phy_chain_rx_polarity_flip_physical{229.0}=0x0 +phy_chain_rx_polarity_flip_physical{230.0}=0x0 +phy_chain_rx_polarity_flip_physical{231.0}=0x0 +phy_chain_rx_polarity_flip_physical{232.0}=0x0 +phy_chain_rx_polarity_flip_physical{233.0}=0x0 +phy_chain_rx_polarity_flip_physical{234.0}=0x0 +phy_chain_rx_polarity_flip_physical{235.0}=0x0 +phy_chain_rx_polarity_flip_physical{236.0}=0x0 +phy_chain_rx_polarity_flip_physical{237.0}=0x0 +phy_chain_rx_polarity_flip_physical{238.0}=0x0 +phy_chain_rx_polarity_flip_physical{239.0}=0x0 +phy_chain_rx_polarity_flip_physical{240.0}=0x0 +phy_chain_rx_polarity_flip_physical{241.0}=0x0 +phy_chain_rx_polarity_flip_physical{242.0}=0x0 +phy_chain_rx_polarity_flip_physical{243.0}=0x1 +phy_chain_rx_polarity_flip_physical{244.0}=0x0 +phy_chain_rx_polarity_flip_physical{245.0}=0x0 +phy_chain_rx_polarity_flip_physical{246.0}=0x0 +phy_chain_rx_polarity_flip_physical{247.0}=0x0 +phy_chain_rx_polarity_flip_physical{248.0}=0x0 +phy_chain_rx_polarity_flip_physical{249.0}=0x0 +phy_chain_rx_polarity_flip_physical{250.0}=0x0 +phy_chain_rx_polarity_flip_physical{251.0}=0x1 +phy_chain_rx_polarity_flip_physical{252.0}=0x0 +phy_chain_rx_polarity_flip_physical{253.0}=0x0 +phy_chain_rx_polarity_flip_physical{254.0}=0x0 +phy_chain_rx_polarity_flip_physical{255.0}=0x0 +phy_chain_rx_polarity_flip_physical{256.0}=0x0 + +dport_map_enable=1 +dport_map_port_3=68 +dport_map_port_4=69 +dport_map_port_5=3 +dport_map_port_6=4 +dport_map_port_7=70 +dport_map_port_8=71 +dport_map_port_9=5 +dport_map_port_10=6 +dport_map_port_11=72 +dport_map_port_12=73 +dport_map_port_13=7 +dport_map_port_14=8 +dport_map_port_15=74 +dport_map_port_16=75 +dport_map_port_34=9 +dport_map_port_35=10 +dport_map_port_36=76 +dport_map_port_37=77 +dport_map_port_38=11 +dport_map_port_39=12 +dport_map_port_40=78 +dport_map_port_41=79 +dport_map_port_42=13 +dport_map_port_43=14 +dport_map_port_44=80 +dport_map_port_45=81 +dport_map_port_46=15 +dport_map_port_47=16 +dport_map_port_48=82 +dport_map_port_49=83 +dport_map_port_68=34 +dport_map_port_69=35 +dport_map_port_70=102 +dport_map_port_71=103 +dport_map_port_72=36 +dport_map_port_73=37 +dport_map_port_74=104 +dport_map_port_75=105 +dport_map_port_76=38 +dport_map_port_77=39 +dport_map_port_78=106 +dport_map_port_79=107 +dport_map_port_80=40 +dport_map_port_81=41 +dport_map_port_82=108 +dport_map_port_83=109 +dport_map_port_102=42 +dport_map_port_103=43 +dport_map_port_104=110 +dport_map_port_105=111 +dport_map_port_106=44 +dport_map_port_107=45 +dport_map_port_108=112 +dport_map_port_109=113 +dport_map_port_110=46 +dport_map_port_111=47 +dport_map_port_112=114 +dport_map_port_113=115 +dport_map_port_114=48 +dport_map_port_115=49 diff --git a/device/inventec/x86_64-inventec_d7264q28b-r0/installer.conf b/device/inventec/x86_64-inventec_d7264q28b-r0/installer.conf new file mode 100644 index 000000000000..1db64ba02c38 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7264q28b-r0/installer.conf @@ -0,0 +1,4 @@ +CONSOLE_PORT=0x3f8 +CONSOLE_DEV=0 +CONSOLE_SPEED=115200 +VAR_LOG_SIZE=1024 diff --git a/device/inventec/x86_64-inventec_d7264q28b-r0/led_proc_init.soc b/device/inventec/x86_64-inventec_d7264q28b-r0/led_proc_init.soc new file mode 100644 index 000000000000..296f8746f101 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7264q28b-r0/led_proc_init.soc @@ -0,0 +1,273 @@ +#LED processor initialization for Inventec Sequoia platform + +led 0 stop +led 0 prog 02 00 60 F1 12 00 DA 0F 70 10 67 72 67 6D 77 06 02 A0 60 F0 02 00 60 F2 12 00 02 00 60 F4 06 F0 4A 01 71 41 4A 03 27 67 6D 4A 02 27 67 6D 06 F2 28 32 08 67 6D 06 F2 28 32 00 32 01 B7 67 6D 77 4D 67 75 67 6D 67 75 67 6D 67 72 67 6D DA A0 70 5F 86 F0 86 F2 86 F4 06 F4 D2 04 74 2E 77 1A 12 00 DA 00 70 6B 67 75 67 6D 77 61 3E F1 87 86 F1 81 57 17 27 57 07 27 57 +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_0=59 +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_1=57 +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_2=58 +m CMIC_LEDUP0_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=56 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_4=51 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_5=49 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_6=50 +m CMIC_LEDUP0_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=48 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_8=63 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_9=61 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_10=62 +m CMIC_LEDUP0_PORT_ORDER_REMAP_8_11 REMAP_PORT_11=60 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_12=55 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_13=53 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_14=54 +m CMIC_LEDUP0_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=52 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_16=43 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_17=41 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_18=42 +m CMIC_LEDUP0_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=40 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_20=35 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_21=33 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_22=34 +m CMIC_LEDUP0_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=32 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_24=47 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_25=45 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_26=46 +m CMIC_LEDUP0_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=44 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_28=39 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_29=37 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_30=38 +m CMIC_LEDUP0_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=36 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_32=27 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_33=25 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_34=26 +m CMIC_LEDUP0_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=24 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_36=19 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_37=17 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_38=18 +m CMIC_LEDUP0_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=16 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_40=31 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_41=29 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_42=30 +m CMIC_LEDUP0_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=28 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_44=23 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_45=21 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_46=22 +m CMIC_LEDUP0_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=20 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_48=11 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_49=9 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_50=10 +m CMIC_LEDUP0_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=8 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_52=3 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_53=1 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_54=2 +m CMIC_LEDUP0_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=0 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_56=15 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_57=13 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_58=14 +m CMIC_LEDUP0_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=12 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_60=7 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_61=5 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_62=6 +m CMIC_LEDUP0_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=4 +led 0 start + +led 1 stop +led 1 prog 02 00 60 F1 12 00 DA 0F 70 10 67 72 67 6D 77 06 02 A0 60 F0 02 00 60 F2 12 00 02 00 60 F4 06 F0 4A 01 71 41 4A 03 27 67 6D 4A 02 27 67 6D 06 F2 28 32 08 67 6D 06 F2 28 32 00 32 01 B7 67 6D 77 4D 67 75 67 6D 67 75 67 6D 67 72 67 6D DA A0 70 5F 86 F0 86 F2 86 F4 06 F4 D2 04 74 2E 77 1A 12 00 DA 00 70 6B 67 75 67 6D 77 61 3E F1 87 86 F1 81 57 17 27 57 07 27 57 +m CMIC_LEDUP1_PORT_ORDER_REMAP_0_3 REMAP_PORT_0=7 +m CMIC_LEDUP1_PORT_ORDER_REMAP_0_3 REMAP_PORT_1=5 +m CMIC_LEDUP1_PORT_ORDER_REMAP_0_3 REMAP_PORT_2=6 +m CMIC_LEDUP1_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=4 +m CMIC_LEDUP1_PORT_ORDER_REMAP_4_7 REMAP_PORT_4=15 +m CMIC_LEDUP1_PORT_ORDER_REMAP_4_7 REMAP_PORT_5=13 +m CMIC_LEDUP1_PORT_ORDER_REMAP_4_7 REMAP_PORT_6=14 +m CMIC_LEDUP1_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=12 +m CMIC_LEDUP1_PORT_ORDER_REMAP_8_11 REMAP_PORT_8=3 +m CMIC_LEDUP1_PORT_ORDER_REMAP_8_11 REMAP_PORT_9=1 +m CMIC_LEDUP1_PORT_ORDER_REMAP_8_11 REMAP_PORT_10=2 +m CMIC_LEDUP1_PORT_ORDER_REMAP_8_11 REMAP_PORT_11=0 +m CMIC_LEDUP1_PORT_ORDER_REMAP_12_15 REMAP_PORT_12=11 +m CMIC_LEDUP1_PORT_ORDER_REMAP_12_15 REMAP_PORT_13=9 +m CMIC_LEDUP1_PORT_ORDER_REMAP_12_15 REMAP_PORT_14=10 +m CMIC_LEDUP1_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=8 +m CMIC_LEDUP1_PORT_ORDER_REMAP_16_19 REMAP_PORT_16=23 +m CMIC_LEDUP1_PORT_ORDER_REMAP_16_19 REMAP_PORT_17=21 +m CMIC_LEDUP1_PORT_ORDER_REMAP_16_19 REMAP_PORT_18=22 +m CMIC_LEDUP1_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=20 +m CMIC_LEDUP1_PORT_ORDER_REMAP_20_23 REMAP_PORT_20=31 +m CMIC_LEDUP1_PORT_ORDER_REMAP_20_23 REMAP_PORT_21=29 +m CMIC_LEDUP1_PORT_ORDER_REMAP_20_23 REMAP_PORT_22=30 +m CMIC_LEDUP1_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=28 +m CMIC_LEDUP1_PORT_ORDER_REMAP_24_27 REMAP_PORT_24=19 +m CMIC_LEDUP1_PORT_ORDER_REMAP_24_27 REMAP_PORT_25=17 +m CMIC_LEDUP1_PORT_ORDER_REMAP_24_27 REMAP_PORT_26=18 +m CMIC_LEDUP1_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=16 +m CMIC_LEDUP1_PORT_ORDER_REMAP_28_31 REMAP_PORT_28=27 +m CMIC_LEDUP1_PORT_ORDER_REMAP_28_31 REMAP_PORT_29=25 +m CMIC_LEDUP1_PORT_ORDER_REMAP_28_31 REMAP_PORT_30=26 +m CMIC_LEDUP1_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=24 +m CMIC_LEDUP1_PORT_ORDER_REMAP_32_35 REMAP_PORT_32=39 +m CMIC_LEDUP1_PORT_ORDER_REMAP_32_35 REMAP_PORT_33=37 +m CMIC_LEDUP1_PORT_ORDER_REMAP_32_35 REMAP_PORT_34=38 +m CMIC_LEDUP1_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=36 +m CMIC_LEDUP1_PORT_ORDER_REMAP_36_39 REMAP_PORT_36=47 +m CMIC_LEDUP1_PORT_ORDER_REMAP_36_39 REMAP_PORT_37=45 +m CMIC_LEDUP1_PORT_ORDER_REMAP_36_39 REMAP_PORT_38=46 +m CMIC_LEDUP1_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=44 +m CMIC_LEDUP1_PORT_ORDER_REMAP_40_43 REMAP_PORT_40=35 +m CMIC_LEDUP1_PORT_ORDER_REMAP_40_43 REMAP_PORT_41=33 +m CMIC_LEDUP1_PORT_ORDER_REMAP_40_43 REMAP_PORT_42=34 +m CMIC_LEDUP1_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=32 +m CMIC_LEDUP1_PORT_ORDER_REMAP_44_47 REMAP_PORT_44=43 +m CMIC_LEDUP1_PORT_ORDER_REMAP_44_47 REMAP_PORT_45=41 +m CMIC_LEDUP1_PORT_ORDER_REMAP_44_47 REMAP_PORT_46=42 +m CMIC_LEDUP1_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=40 +m CMIC_LEDUP1_PORT_ORDER_REMAP_48_51 REMAP_PORT_48=55 +m CMIC_LEDUP1_PORT_ORDER_REMAP_48_51 REMAP_PORT_49=53 +m CMIC_LEDUP1_PORT_ORDER_REMAP_48_51 REMAP_PORT_50=54 +m CMIC_LEDUP1_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=52 +m CMIC_LEDUP1_PORT_ORDER_REMAP_52_55 REMAP_PORT_52=63 +m CMIC_LEDUP1_PORT_ORDER_REMAP_52_55 REMAP_PORT_53=61 +m CMIC_LEDUP1_PORT_ORDER_REMAP_52_55 REMAP_PORT_54=62 +m CMIC_LEDUP1_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=60 +m CMIC_LEDUP1_PORT_ORDER_REMAP_56_59 REMAP_PORT_56=51 +m CMIC_LEDUP1_PORT_ORDER_REMAP_56_59 REMAP_PORT_57=49 +m CMIC_LEDUP1_PORT_ORDER_REMAP_56_59 REMAP_PORT_58=50 +m CMIC_LEDUP1_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=48 +m CMIC_LEDUP1_PORT_ORDER_REMAP_60_63 REMAP_PORT_60=59 +m CMIC_LEDUP1_PORT_ORDER_REMAP_60_63 REMAP_PORT_61=57 +m CMIC_LEDUP1_PORT_ORDER_REMAP_60_63 REMAP_PORT_62=58 +m CMIC_LEDUP1_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=56 +led 1 start + +led 2 stop +led 2 prog 02 00 60 F1 12 00 DA 0F 70 10 67 72 67 6D 77 06 02 A0 60 F0 02 00 60 F2 12 00 02 00 60 F4 06 F0 4A 01 71 41 4A 03 27 67 6D 4A 02 27 67 6D 06 F2 28 32 08 67 6D 06 F2 28 32 00 32 01 B7 67 6D 77 4D 67 75 67 6D 67 75 67 6D 67 72 67 6D DA A0 70 5F 86 F0 86 F2 86 F4 06 F4 D2 04 74 2E 77 1A 12 00 DA 00 70 6B 67 75 67 6D 77 61 3E F1 87 86 F1 81 57 17 27 57 07 27 57 +m CMIC_LEDUP2_PORT_ORDER_REMAP_0_3 REMAP_PORT_0=59 +m CMIC_LEDUP2_PORT_ORDER_REMAP_0_3 REMAP_PORT_1=57 +m CMIC_LEDUP2_PORT_ORDER_REMAP_0_3 REMAP_PORT_2=58 +m CMIC_LEDUP2_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=56 +m CMIC_LEDUP2_PORT_ORDER_REMAP_4_7 REMAP_PORT_4=51 +m CMIC_LEDUP2_PORT_ORDER_REMAP_4_7 REMAP_PORT_5=49 +m CMIC_LEDUP2_PORT_ORDER_REMAP_4_7 REMAP_PORT_6=50 +m CMIC_LEDUP2_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=48 +m CMIC_LEDUP2_PORT_ORDER_REMAP_8_11 REMAP_PORT_8=63 +m CMIC_LEDUP2_PORT_ORDER_REMAP_8_11 REMAP_PORT_9=61 +m CMIC_LEDUP2_PORT_ORDER_REMAP_8_11 REMAP_PORT_10=62 +m CMIC_LEDUP2_PORT_ORDER_REMAP_8_11 REMAP_PORT_11=60 +m CMIC_LEDUP2_PORT_ORDER_REMAP_12_15 REMAP_PORT_12=55 +m CMIC_LEDUP2_PORT_ORDER_REMAP_12_15 REMAP_PORT_13=53 +m CMIC_LEDUP2_PORT_ORDER_REMAP_12_15 REMAP_PORT_14=54 +m CMIC_LEDUP2_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=52 +m CMIC_LEDUP2_PORT_ORDER_REMAP_16_19 REMAP_PORT_16=43 +m CMIC_LEDUP2_PORT_ORDER_REMAP_16_19 REMAP_PORT_17=41 +m CMIC_LEDUP2_PORT_ORDER_REMAP_16_19 REMAP_PORT_18=42 +m CMIC_LEDUP2_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=40 +m CMIC_LEDUP2_PORT_ORDER_REMAP_20_23 REMAP_PORT_20=35 +m CMIC_LEDUP2_PORT_ORDER_REMAP_20_23 REMAP_PORT_21=33 +m CMIC_LEDUP2_PORT_ORDER_REMAP_20_23 REMAP_PORT_22=34 +m CMIC_LEDUP2_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=32 +m CMIC_LEDUP2_PORT_ORDER_REMAP_24_27 REMAP_PORT_24=47 +m CMIC_LEDUP2_PORT_ORDER_REMAP_24_27 REMAP_PORT_25=45 +m CMIC_LEDUP2_PORT_ORDER_REMAP_24_27 REMAP_PORT_26=46 +m CMIC_LEDUP2_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=44 +m CMIC_LEDUP2_PORT_ORDER_REMAP_28_31 REMAP_PORT_28=39 +m CMIC_LEDUP2_PORT_ORDER_REMAP_28_31 REMAP_PORT_29=37 +m CMIC_LEDUP2_PORT_ORDER_REMAP_28_31 REMAP_PORT_30=38 +m CMIC_LEDUP2_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=36 +m CMIC_LEDUP2_PORT_ORDER_REMAP_32_35 REMAP_PORT_32=27 +m CMIC_LEDUP2_PORT_ORDER_REMAP_32_35 REMAP_PORT_33=25 +m CMIC_LEDUP2_PORT_ORDER_REMAP_32_35 REMAP_PORT_34=26 +m CMIC_LEDUP2_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=24 +m CMIC_LEDUP2_PORT_ORDER_REMAP_36_39 REMAP_PORT_36=19 +m CMIC_LEDUP2_PORT_ORDER_REMAP_36_39 REMAP_PORT_37=17 +m CMIC_LEDUP2_PORT_ORDER_REMAP_36_39 REMAP_PORT_38=18 +m CMIC_LEDUP2_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=16 +m CMIC_LEDUP2_PORT_ORDER_REMAP_40_43 REMAP_PORT_40=31 +m CMIC_LEDUP2_PORT_ORDER_REMAP_40_43 REMAP_PORT_41=29 +m CMIC_LEDUP2_PORT_ORDER_REMAP_40_43 REMAP_PORT_42=30 +m CMIC_LEDUP2_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=28 +m CMIC_LEDUP2_PORT_ORDER_REMAP_44_47 REMAP_PORT_44=23 +m CMIC_LEDUP2_PORT_ORDER_REMAP_44_47 REMAP_PORT_45=21 +m CMIC_LEDUP2_PORT_ORDER_REMAP_44_47 REMAP_PORT_46=22 +m CMIC_LEDUP2_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=20 +m CMIC_LEDUP2_PORT_ORDER_REMAP_48_51 REMAP_PORT_48=11 +m CMIC_LEDUP2_PORT_ORDER_REMAP_48_51 REMAP_PORT_49=9 +m CMIC_LEDUP2_PORT_ORDER_REMAP_48_51 REMAP_PORT_50=10 +m CMIC_LEDUP2_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=8 +m CMIC_LEDUP2_PORT_ORDER_REMAP_52_55 REMAP_PORT_52=3 +m CMIC_LEDUP2_PORT_ORDER_REMAP_52_55 REMAP_PORT_53=1 +m CMIC_LEDUP2_PORT_ORDER_REMAP_52_55 REMAP_PORT_54=2 +m CMIC_LEDUP2_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=0 +m CMIC_LEDUP2_PORT_ORDER_REMAP_56_59 REMAP_PORT_56=15 +m CMIC_LEDUP2_PORT_ORDER_REMAP_56_59 REMAP_PORT_57=13 +m CMIC_LEDUP2_PORT_ORDER_REMAP_56_59 REMAP_PORT_58=14 +m CMIC_LEDUP2_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=12 +m CMIC_LEDUP2_PORT_ORDER_REMAP_60_63 REMAP_PORT_60=7 +m CMIC_LEDUP2_PORT_ORDER_REMAP_60_63 REMAP_PORT_61=5 +m CMIC_LEDUP2_PORT_ORDER_REMAP_60_63 REMAP_PORT_62=6 +m CMIC_LEDUP2_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=4 +led 2 start + +led 3 stop +led 3 prog 02 00 60 F1 12 00 DA 0F 70 10 67 72 67 6D 77 06 02 A0 60 F0 02 00 60 F2 12 00 02 00 60 F4 06 F0 4A 01 71 41 4A 03 27 67 6D 4A 02 27 67 6D 06 F2 28 32 08 67 6D 06 F2 28 32 00 32 01 B7 67 6D 77 4D 67 75 67 6D 67 75 67 6D 67 72 67 6D DA A0 70 5F 86 F0 86 F2 86 F4 06 F4 D2 04 74 2E 77 1A 12 00 DA 00 70 6B 67 75 67 6D 77 61 3E F1 87 86 F1 81 57 17 27 57 07 27 57 +m CMIC_LEDUP3_PORT_ORDER_REMAP_0_3 REMAP_PORT_0=7 +m CMIC_LEDUP3_PORT_ORDER_REMAP_0_3 REMAP_PORT_1=5 +m CMIC_LEDUP3_PORT_ORDER_REMAP_0_3 REMAP_PORT_2=6 +m CMIC_LEDUP3_PORT_ORDER_REMAP_0_3 REMAP_PORT_3=4 +m CMIC_LEDUP3_PORT_ORDER_REMAP_4_7 REMAP_PORT_4=15 +m CMIC_LEDUP3_PORT_ORDER_REMAP_4_7 REMAP_PORT_5=13 +m CMIC_LEDUP3_PORT_ORDER_REMAP_4_7 REMAP_PORT_6=14 +m CMIC_LEDUP3_PORT_ORDER_REMAP_4_7 REMAP_PORT_7=12 +m CMIC_LEDUP3_PORT_ORDER_REMAP_8_11 REMAP_PORT_8=3 +m CMIC_LEDUP3_PORT_ORDER_REMAP_8_11 REMAP_PORT_9=1 +m CMIC_LEDUP3_PORT_ORDER_REMAP_8_11 REMAP_PORT_10=2 +m CMIC_LEDUP3_PORT_ORDER_REMAP_8_11 REMAP_PORT_11=0 +m CMIC_LEDUP3_PORT_ORDER_REMAP_12_15 REMAP_PORT_12=11 +m CMIC_LEDUP3_PORT_ORDER_REMAP_12_15 REMAP_PORT_13=9 +m CMIC_LEDUP3_PORT_ORDER_REMAP_12_15 REMAP_PORT_14=10 +m CMIC_LEDUP3_PORT_ORDER_REMAP_12_15 REMAP_PORT_15=8 +m CMIC_LEDUP3_PORT_ORDER_REMAP_16_19 REMAP_PORT_16=23 +m CMIC_LEDUP3_PORT_ORDER_REMAP_16_19 REMAP_PORT_17=21 +m CMIC_LEDUP3_PORT_ORDER_REMAP_16_19 REMAP_PORT_18=22 +m CMIC_LEDUP3_PORT_ORDER_REMAP_16_19 REMAP_PORT_19=20 +m CMIC_LEDUP3_PORT_ORDER_REMAP_20_23 REMAP_PORT_20=31 +m CMIC_LEDUP3_PORT_ORDER_REMAP_20_23 REMAP_PORT_21=29 +m CMIC_LEDUP3_PORT_ORDER_REMAP_20_23 REMAP_PORT_22=30 +m CMIC_LEDUP3_PORT_ORDER_REMAP_20_23 REMAP_PORT_23=28 +m CMIC_LEDUP3_PORT_ORDER_REMAP_24_27 REMAP_PORT_24=19 +m CMIC_LEDUP3_PORT_ORDER_REMAP_24_27 REMAP_PORT_25=17 +m CMIC_LEDUP3_PORT_ORDER_REMAP_24_27 REMAP_PORT_26=18 +m CMIC_LEDUP3_PORT_ORDER_REMAP_24_27 REMAP_PORT_27=16 +m CMIC_LEDUP3_PORT_ORDER_REMAP_28_31 REMAP_PORT_28=27 +m CMIC_LEDUP3_PORT_ORDER_REMAP_28_31 REMAP_PORT_29=25 +m CMIC_LEDUP3_PORT_ORDER_REMAP_28_31 REMAP_PORT_30=26 +m CMIC_LEDUP3_PORT_ORDER_REMAP_28_31 REMAP_PORT_31=24 +m CMIC_LEDUP3_PORT_ORDER_REMAP_32_35 REMAP_PORT_32=39 +m CMIC_LEDUP3_PORT_ORDER_REMAP_32_35 REMAP_PORT_33=37 +m CMIC_LEDUP3_PORT_ORDER_REMAP_32_35 REMAP_PORT_34=38 +m CMIC_LEDUP3_PORT_ORDER_REMAP_32_35 REMAP_PORT_35=36 +m CMIC_LEDUP3_PORT_ORDER_REMAP_36_39 REMAP_PORT_36=47 +m CMIC_LEDUP3_PORT_ORDER_REMAP_36_39 REMAP_PORT_37=45 +m CMIC_LEDUP3_PORT_ORDER_REMAP_36_39 REMAP_PORT_38=46 +m CMIC_LEDUP3_PORT_ORDER_REMAP_36_39 REMAP_PORT_39=44 +m CMIC_LEDUP3_PORT_ORDER_REMAP_40_43 REMAP_PORT_40=35 +m CMIC_LEDUP3_PORT_ORDER_REMAP_40_43 REMAP_PORT_41=33 +m CMIC_LEDUP3_PORT_ORDER_REMAP_40_43 REMAP_PORT_42=34 +m CMIC_LEDUP3_PORT_ORDER_REMAP_40_43 REMAP_PORT_43=32 +m CMIC_LEDUP3_PORT_ORDER_REMAP_44_47 REMAP_PORT_44=43 +m CMIC_LEDUP3_PORT_ORDER_REMAP_44_47 REMAP_PORT_45=41 +m CMIC_LEDUP3_PORT_ORDER_REMAP_44_47 REMAP_PORT_46=42 +m CMIC_LEDUP3_PORT_ORDER_REMAP_44_47 REMAP_PORT_47=40 +m CMIC_LEDUP3_PORT_ORDER_REMAP_48_51 REMAP_PORT_48=55 +m CMIC_LEDUP3_PORT_ORDER_REMAP_48_51 REMAP_PORT_49=53 +m CMIC_LEDUP3_PORT_ORDER_REMAP_48_51 REMAP_PORT_50=54 +m CMIC_LEDUP3_PORT_ORDER_REMAP_48_51 REMAP_PORT_51=52 +m CMIC_LEDUP3_PORT_ORDER_REMAP_52_55 REMAP_PORT_52=63 +m CMIC_LEDUP3_PORT_ORDER_REMAP_52_55 REMAP_PORT_53=61 +m CMIC_LEDUP3_PORT_ORDER_REMAP_52_55 REMAP_PORT_54=62 +m CMIC_LEDUP3_PORT_ORDER_REMAP_52_55 REMAP_PORT_55=60 +m CMIC_LEDUP3_PORT_ORDER_REMAP_56_59 REMAP_PORT_56=51 +m CMIC_LEDUP3_PORT_ORDER_REMAP_56_59 REMAP_PORT_57=49 +m CMIC_LEDUP3_PORT_ORDER_REMAP_56_59 REMAP_PORT_58=50 +m CMIC_LEDUP3_PORT_ORDER_REMAP_56_59 REMAP_PORT_59=48 +m CMIC_LEDUP3_PORT_ORDER_REMAP_60_63 REMAP_PORT_60=59 +m CMIC_LEDUP3_PORT_ORDER_REMAP_60_63 REMAP_PORT_61=57 +m CMIC_LEDUP3_PORT_ORDER_REMAP_60_63 REMAP_PORT_62=58 +m CMIC_LEDUP3_PORT_ORDER_REMAP_60_63 REMAP_PORT_63=56 +led 3 start diff --git a/device/inventec/x86_64-inventec_d7264q28b-r0/minigraph.xml b/device/inventec/x86_64-inventec_d7264q28b-r0/minigraph.xml new file mode 100644 index 000000000000..b68f712b2624 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7264q28b-r0/minigraph.xml @@ -0,0 +1,144 @@ + + + + + + OCPSCH0104001MS + 10.10.1.26 + SONiC-Inventec-d7264 + 10.10.1.25 + 1 + 10 + 3 + + + OCPSCH0104002MS + 10.10.2.26 + SONiC-Inventec-d7264 + 10.10.2.25 + 1 + 10 + 3 + + + + + 64536 + SONiC-Inventec-d7264 + + +
10.10.1.26
+ + + + +
10.10.2.26
+ + + + + + + + 64542 + OCPSCH0104001MS + + + + 64543 + OCPSCH0104002MS + + + + + + + + + + HostIP + Loopback0 + + 100.0.0.9/32 + + 100.0.0.9/32 + + + + + + + + SONiC-Inventec-d7264 + + + + + + Ethernet0 + 10.10.1.25/30 + + + + Ethernet4 + 10.10.2.25/30 + + + + + + + + + + + + DeviceInterfaceLink + OCPSCH0104001MS + Ethernet24 + SONiC-Inventec-d7264 + Ethernet0 + + + DeviceInterfaceLink + OCPSCH0104002MS + Ethernet24 + SONiC-Inventec-d7264 + Ethernet4 + + + + + SONiC-Inventec-d7264 + INVENTEC-D7264Q28B + + + + + + + SONiC-Inventec-d7264 + + + DhcpResources + + + + + NtpResources + + 0.debian.pool.ntp.org;1.debian.pool.ntp.org;2.debian.pool.ntp.org;3.debian.pool.ntp.org + + + SyslogResources + + + + + + + + + SONiC-Inventec-d7264 + INVENTEC-D7264Q28B + diff --git a/device/inventec/x86_64-inventec_d7264q28b-r0/plugins/eeprom.py b/device/inventec/x86_64-inventec_d7264q28b-r0/plugins/eeprom.py new file mode 100644 index 000000000000..de5c24ba0e6d --- /dev/null +++ b/device/inventec/x86_64-inventec_d7264q28b-r0/plugins/eeprom.py @@ -0,0 +1,22 @@ +#!/usr/bin/env python + +############################################################################# +# Inventec d7032q28b +# +# Platform and model specific eeprom subclass, inherits from the base class, +# and provides the followings: +# - the eeprom format definition +# - specific encoder/decoder if there is special need +############################################################################# + +try: + from sonic_eeprom import eeprom_tlvinfo +except ImportError, e: + raise ImportError (str(e) + "- required module not found") + + +class board(eeprom_tlvinfo.TlvInfoDecoder): + + def __init__(self, name, path, cpld_root, ro): + self.eeprom_path = "/sys/class/i2c-adapter/i2c-0/0-0053/eeprom" + super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/inventec/x86_64-inventec_d7264q28b-r0/plugins/psuutil.py b/device/inventec/x86_64-inventec_d7264q28b-r0/plugins/psuutil.py new file mode 100755 index 000000000000..c2337a97f4ea --- /dev/null +++ b/device/inventec/x86_64-inventec_d7264q28b-r0/plugins/psuutil.py @@ -0,0 +1,93 @@ +# +# psuutil.py +# Platform-specific PSU status interface for SONiC +# + + +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError(str(e) + "- required module not found") + + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + PSU_DIR1 = "/sys/class/hwmon/hwmon1/device" + PSU_DIR2 = "/sys/class/hwmon/hwmon3/device" + + def __init__(self): + PsuBase.__init__(self) + +# Get sysfs attribute + def get_attr_value(self, attr_path): + + retval = 'ERR' + if (not os.path.isfile(attr_path)): + return retval + + try: + with open(attr_path, 'r') as fd: + retval = fd.read() + except Exception as error: + logging.error("Unable to open ", attr_path, " file !") + + retval = retval.rstrip(' \t\n\r') + return retval + + def get_num_psus(self): + """ + Retrieves the number of PSUs available on the device + :return: An integer, the number of PSUs available on the device + """ + MAX_PSUS = 2 + return MAX_PSUS + + def get_psu_status(self, index): + """ + Retrieves the oprational status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is operating properly, False if PSU is\ + faulty + """ + status = 0 + attr_file = 'psoc_psu'+ str(index) + '_iout' + attr_path = self.PSU_DIR1 +'/' + attr_file + + attr_value = self.get_attr_value(attr_path) + if (attr_value == 'ERR'): + attr_path = self.PSU_DIR2 +'/' + attr_file + attr_value = self.get_attr_value(attr_path) + # Check for PSU status + if (attr_value != 0): + status = 1 + if (attr_value != 0): + status = 1 + return status + + def get_psu_presence(self, index): + """ + Retrieves the presence status of power supply unit (PSU) defined + by index + :param index: An integer, index of the PSU of which to query status + :return: Boolean, True if PSU is plugged, False if not + """ + status = 0 + psu_absent = 0 + ind = index-1 + attr_file ='psu'+ str(ind) + normal_attr_value = '0 : normal' + attr_path = self.PSU_DIR1 +'/' + attr_file + attr_value = self.get_attr_value(attr_path) + if (attr_value == 'ERR'): + attr_path = self.PSU_DIR2 +'/' + attr_file + attr_value = self.get_attr_value(attr_path) + # Check for PSU presence + if (attr_value == normal_attr_value): + status = 1 + if (attr_value == normal_attr_value): + status = 1 + return status diff --git a/device/inventec/x86_64-inventec_d7264q28b-r0/plugins/sfputil.py b/device/inventec/x86_64-inventec_d7264q28b-r0/plugins/sfputil.py new file mode 100755 index 000000000000..aa551932dc78 --- /dev/null +++ b/device/inventec/x86_64-inventec_d7264q28b-r0/plugins/sfputil.py @@ -0,0 +1,219 @@ +# sfputil.py +# +# Platform-specific SFP transceiver interface for SONiC +# + +try: + import time + from sonic_sfp.sfputilbase import SfpUtilBase +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + + PORT_START = 0 + PORT_END = 63 + PORTS_IN_BLOCK = 64 + QSFP_PORT_START = 0 + QSFP_PORT_END = 63 + + _port_to_eeprom_mapping = {} + port_to_i2c_mapping = { + 0: 10, + 1: 11, + 2: 12, + 3: 13, + 4: 14, + 5: 15, + 6: 16, + 7: 17, + 8: 18, + 9: 19, + 10: 20, + 11: 21, + 12: 22, + 13: 23, + 14: 24, + 15: 25, + 16: 26, + 17: 27, + 18: 28, + 19: 29, + 20: 30, + 21: 31, + 22: 32, + 23: 33, + 24: 34, + 25: 35, + 26: 36, + 27: 37, + 28: 38, + 29: 39, + 30: 40, + 31: 41, + 32: 45, + 33: 44, + 34: 43, + 35: 42, + 36: 49, + 37: 48, + 38: 47, + 39: 46, + 40: 53, + 41: 52, + 42: 51, + 43: 50, + 44: 57, + 45: 56, + 46: 55, + 47: 54, + 48: 61, + 49: 60, + 50: 59, + 51: 58, + 52: 65, + 53: 64, + 54: 63, + 55: 62, + 56: 69, + 57: 68, + 58: 67, + 59: 66, + 60: 73, + 61: 72, + 62: 71, + 63: 70 + } + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_port_start(self): + return self.QSFP_PORT_START + + @property + def qsfp_port_end(self): + return self.QSFP_PORT_END + + @property + def qsfp_ports(self): + return range(self.QSFP_PORT_START, self.PORTS_IN_BLOCK + 1) + + @property + def port_to_eeprom_mapping(self): + return self._port_to_eeprom_mapping + + def __init__(self): + eeprom_path = "/sys/bus/i2c/devices/{0}-0050/eeprom" + + for x in range(0, self.port_end + 1): + port_eeprom_path = eeprom_path.format(self.port_to_i2c_mapping[x]) + self.port_to_eeprom_mapping[x] = port_eeprom_path + SfpUtilBase.__init__(self) + + def get_presence(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + try: + reg_file = open("/sys/class/swps/port"+str(port_num)+"/present") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + reg_value = int(reg_file.readline().rstrip()) + + if reg_value == 0: + return True + + return False + + def get_low_power_mode(self, port_num): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + if port_num < self.qsfp_port_start or port_num > self.qsfp_port_end: + return False + + try: + reg_file = open("/sys/class/swps/port"+str(port_num)+"/lpmod") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + + reg_value = int(reg_file.readline().rstrip()) + + if reg_value == 0: + return False + + return True + + def set_low_power_mode(self, port_num, lpmode): + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + if port_num < self.qsfp_port_start or port_num > self.qsfp_port_end: + print "\nError:SFP's don't support this property" + return False + + try: + reg_file = open("/sys/class/swps/port"+str(port_num)+"/lpmod", "r+") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + reg_value = int(reg_file.readline().rstrip()) + + # LPMode is active high; set or clear the bit accordingly + if lpmode is True: + reg_value = 1 + else: + reg_value = 0 + + reg_file.write(hex(reg_value)) + reg_file.close() + + return True + + def reset(self, port_num): + QSFP_RESET_REGISTER_DEVICE_FILE = "/sys/class/swps/port"+str(port_num)+"/reset" + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + if port_num < self.qsfp_port_start or port_num > self.qsfp_port_end: + print "\nError:SFP's don't support this property" + return False + + try: + reg_file = open(QSFP_RESET_REGISTER_DEVICE_FILE, "r+") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + reg_value = 0 + reg_file.write(hex(reg_value)) + reg_file.close() + + # Sleep 2 second to allow it to settle + time.sleep(2) + + # Flip the value back write back to the register to take port out of reset + try: + reg_file = open(QSFP_RESET_REGISTER_DEVICE_FILE, "r+") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + reg_value = 1 + reg_file.write(hex(reg_value)) + reg_file.close() + + return True diff --git a/platform/broadcom/one-image.mk b/platform/broadcom/one-image.mk index 8b24216d0a9d..29b0f20ef01b 100755 --- a/platform/broadcom/one-image.mk +++ b/platform/broadcom/one-image.mk @@ -22,6 +22,7 @@ $(SONIC_ONE_IMAGE)_LAZY_INSTALLS += $(DELL_S6000_PLATFORM_MODULE) \ $(ACCTON_AS7716_32XB_PLATFORM_MODULE) \ $(INVENTEC_D7032Q28B_PLATFORM_MODULE) \ $(INVENTEC_D7054Q28B_PLATFORM_MODULE) \ + $(INVENTEC_D7264Q28B_PLATFORM_MODULE) \ $(CEL_DX010_PLATFORM_MODULE) \ $(CEL_HALIBURTON_PLATFORM_MODULE) \ $(DELTA_AG9032V1_PLATFORM_MODULE) \ diff --git a/platform/broadcom/platform-modules-inventec.mk b/platform/broadcom/platform-modules-inventec.mk index 0960c2aefbcc..2a6f32f923c4 100644 --- a/platform/broadcom/platform-modules-inventec.mk +++ b/platform/broadcom/platform-modules-inventec.mk @@ -1,10 +1,12 @@ -# Inventec d7032q28b and d7054q28b Platform modules +# Inventec d7032q28b , d7054q28b and d7264q28b Platform modules INVENTEC_D7032Q28B_PLATFORM_MODULE_VERSION = 1.1.0 INVENTEC_D7054Q28B_PLATFORM_MODULE_VERSION = 1.1.0 +INVENTEC_D7264Q28B_PLATFORM_MODULE_VERSION = 1.1.0 export INVENTEC_D7032Q28B_PLATFORM_MODULE_VERSION export INVENTEC_D7054Q28B_PLATFORM_MODULE_VERSION +export INVENTEC_D7264Q28B_PLATFORM_MODULE_VERSION INVENTEC_D7032Q28B_PLATFORM_MODULE = platform-modules-d7032q28b_$(INVENTEC_D7032Q28B_PLATFORM_MODULE_VERSION)_amd64.deb $(INVENTEC_D7032Q28B_PLATFORM_MODULE)_SRC_PATH = $(PLATFORM_PATH)/sonic-platform-modules-inventec @@ -16,4 +18,8 @@ INVENTEC_D7054Q28B_PLATFORM_MODULE = platform-modules-d7054q28b_$(INVENTEC_D7054 $(INVENTEC_D7054Q28B_PLATFORM_MODULE)_PLATFORM = x86_64-inventec_d7054q28b-r0 $(eval $(call add_extra_package,$(INVENTEC_D7032Q28B_PLATFORM_MODULE),$(INVENTEC_D7054Q28B_PLATFORM_MODULE))) -SONIC_STRETCH_DEBS += $(INVENTEC_D7032Q28B_PLATFORM_MODULE) +INVENTEC_D7264Q28B_PLATFORM_MODULE = platform-modules-d7264q28b_$(INVENTEC_D7264Q28B_PLATFORM_MODULE_VERSION)_amd64.deb +$(INVENTEC_D7264Q28B_PLATFORM_MODULE)_PLATFORM = x86_64-inventec_d7264q28b-r0 +$(eval $(call add_extra_package,$(INVENTEC_D7032Q28B_PLATFORM_MODULE),$(INVENTEC_D7264Q28B_PLATFORM_MODULE))) + +SONIC_STRETCH_DEBS += $(INVENTEC_D7032Q28B_PLATFORM_MODULE) \ No newline at end of file diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/Makefile b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/Makefile new file mode 100755 index 000000000000..aeffa4376588 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/Makefile @@ -0,0 +1,6 @@ +obj-m += inv_cpld.o inv_psoc.o +obj-m += inv_platform.o +obj-m += inv_eeprom.o +obj-m += swps.o +swps-objs := inv_swps.o io_expander.o transceiver.o + diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_cpld.c b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_cpld.c new file mode 100644 index 000000000000..42401d626672 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_cpld.c @@ -0,0 +1,470 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +//#include "I2CHostCommunication.h" + +#define USE_SMBUS 1 + +/* definition */ +#define CPLD_INFO_OFFSET 0x00 +#define CPLD_PSU_OFFSET 0x08 +#define CPLD_LED_OFFSET 0x0E +#define CPLD_LED_STATU_OFFSET 0x0D +#define CPLD_CTL_OFFSET 0x0C +#define CPLD_BIOSCS_OFFSET 0x04 + + +/* Each client has this additional data */ +struct cpld_data { + struct device *hwmon_dev; + struct mutex update_lock; +}; + +/*-----------------------------------------------------------------------*/ + +static ssize_t cpld_i2c_read(struct i2c_client *client, u8 *buf, u8 offset, size_t count) +{ +#if USE_SMBUS + int i; + + for(i=0; iaddr; + msg[0].buf = msgbuf; + msg[0].len = 1; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; + + status = i2c_transfer(client->adapter, msg, 2); + + if(status == 2) + status = count; + + return status; +#endif +} + +static ssize_t cpld_i2c_write(struct i2c_client *client, char *buf, unsigned offset, size_t count) +{ +#if USE_SMBUS + int i; + + for(i=0; iaddr; + msg.flags = 0; + + /* msg.buf is u8 and casts will mask the values */ + msg.buf = writebuf; + + msg.buf[i++] = offset; + memcpy(&msg.buf[i], buf, count); + msg.len = i + count; + + status = i2c_transfer(client->adapter, &msg, 1); + if (status == 1) + status = count; + + return status; +#endif +} + +/*-----------------------------------------------------------------------*/ + +/* sysfs attributes for hwmon */ + +static ssize_t show_info(struct device *dev, struct device_attribute *da, + char *buf) +{ + u32 status; + //struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 b[4]; + + memset(b, 0, 4); + + mutex_lock(&data->update_lock); + status = cpld_i2c_read(client, b, CPLD_INFO_OFFSET, 4); + mutex_unlock(&data->update_lock); + + if(status != 4) return sprintf(buf, "read cpld info fail\n"); + + status = sprintf (buf, "The CPLD release date is %02d/%02d/%d.\n", b[2] & 0xf, (b[3] & 0x1f), 2014+(b[2] >> 4)); /* mm/dd/yyyy*/ + status = sprintf (buf, "%sThe PCB version is %X%X\n", buf, b[0]>>4, b[0]&0xf); + status = sprintf (buf, "%sThe CPLD version is %d.%d\n", buf, b[1]>>4, b[1]&0xf); + + return strlen(buf); +} + + +static ssize_t show_ctl(struct device *dev, struct device_attribute *da, + char *buf) +{ + u32 status; + //struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 b[1]; + + mutex_lock(&data->update_lock); + + status = cpld_i2c_read(client, b, CPLD_CTL_OFFSET, 1); + + mutex_unlock(&data->update_lock); + + if(status != 1) return sprintf(buf, "read cpld ctl fail\n"); + + + status = sprintf (buf, "0x%X\n", b[0]); + + return strlen(buf); +} + +static ssize_t set_ctl(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + //struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 byte; + + u8 temp = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + cpld_i2c_read(client, &byte, CPLD_CTL_OFFSET, 1); + if(temp) byte |= (1<<0); + else byte &= ~(1<<0); + cpld_i2c_write(client, &byte, CPLD_CTL_OFFSET, 1); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_bios_cs(struct device *dev, struct device_attribute *da, + char *buf) +{ + u32 status; + //struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 b[1]; + + mutex_lock(&data->update_lock); + + status = cpld_i2c_read(client, b, CPLD_BIOSCS_OFFSET, 1); + + mutex_unlock(&data->update_lock); + + if(status != 1) return sprintf(buf, "read cpld BIOS_CS fail\n"); + + + status = sprintf (buf, "0x%X\n", b[0] & 0x01); + + return strlen(buf); +} + +static ssize_t set_bios_cs(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + //struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 byte; + + u8 temp = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + cpld_i2c_read(client, &byte, CPLD_BIOSCS_OFFSET, 1); + if(temp) byte |= 0x01; + else byte &= ~(0x01); + cpld_i2c_write(client, &byte, CPLD_BIOSCS_OFFSET, 1); + mutex_unlock(&data->update_lock); + + return count; +} + + +static char* led_str[] = { + "OFF", //000 + "0.5 Hz", //001 + "1 Hz", //010 + "2 Hz", //011 + "4 Hz", //100 + "NA", //101 + "NA", //110 + "ON", //111 +}; + +static ssize_t show_led(struct device *dev, struct device_attribute *da, + char *buf) +{ + u32 status; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 byte; + int shift = (attr->index == 0)?3:0; + + mutex_lock(&data->update_lock); + status = cpld_i2c_read(client, &byte, CPLD_LED_OFFSET, 1); + mutex_unlock(&data->update_lock); + + if(status != 1) return sprintf(buf, "read cpld offset 0x%x\n", CPLD_LED_OFFSET); + + byte = (byte >> shift) & 0x7; + + status = sprintf (buf, "%d: %s\n", byte, led_str[byte]); + + return strlen(buf); +} + +static ssize_t set_led(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + + u8 temp = simple_strtol(buf, NULL, 16); + u8 byte; + int shift = (attr->index == 0)?3:0; + + temp &= 0x7; + //validate temp value: 0,1,2,3,7, TBD + + mutex_lock(&data->update_lock); + cpld_i2c_read(client, &byte, CPLD_LED_OFFSET, 1); + byte &= ~(0x7<update_lock); + + return count; +} + +/* +CPLD report the PSU0 status +000 = PSU normal operation +100 = PSU fault +010 = PSU unpowered +111 = PSU not installed + +7 6 | 5 4 3 | 2 1 0 +---------------------- + | psu0 | psu1 +*/ +static char* psu_str[] = { + "normal", //000 + "NA", //001 + "unpowered", //010 + "NA", //011 + "fault", //100 + "NA", //101 + "NA", //110 + "not installed", //111 +}; + +static ssize_t show_psu(struct device *dev, struct device_attribute *da, + char *buf) +{ + u32 status; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct i2c_client *client = to_i2c_client(dev); + struct cpld_data *data = i2c_get_clientdata(client); + u8 byte; + int shift = (attr->index == 1)?0:3; + + mutex_lock(&data->update_lock); + status = cpld_i2c_read(client, &byte, CPLD_PSU_OFFSET, 1); + mutex_unlock(&data->update_lock); + + byte = (byte >> shift) & 0x7; + + status = sprintf (buf, "%d : %s\n", byte, psu_str[byte]); + + return strlen(buf); +} + + +static SENSOR_DEVICE_ATTR(info, S_IRUGO, show_info, 0, 0); +static SENSOR_DEVICE_ATTR(ctl, S_IWUSR|S_IRUGO, show_ctl, set_ctl, 0); + +static SENSOR_DEVICE_ATTR(grn_led, S_IWUSR|S_IRUGO, show_led, set_led, 0); +static SENSOR_DEVICE_ATTR(red_led, S_IWUSR|S_IRUGO, show_led, set_led, 1); + +static SENSOR_DEVICE_ATTR(psu0, S_IRUGO, show_psu, 0, 0); +static SENSOR_DEVICE_ATTR(psu1, S_IRUGO, show_psu, 0, 1); + +static SENSOR_DEVICE_ATTR(bios_cs, S_IWUSR|S_IRUGO, show_bios_cs, set_bios_cs, 0); + +static struct attribute *cpld_attributes[] = { + //info + &sensor_dev_attr_info.dev_attr.attr, + &sensor_dev_attr_ctl.dev_attr.attr, + + &sensor_dev_attr_grn_led.dev_attr.attr, + &sensor_dev_attr_red_led.dev_attr.attr, + + &sensor_dev_attr_psu0.dev_attr.attr, + &sensor_dev_attr_psu1.dev_attr.attr, + + &sensor_dev_attr_bios_cs.dev_attr.attr, + NULL +}; + +static const struct attribute_group cpld_group = { + .attrs = cpld_attributes, +}; + +static struct attribute *cpld2_attributes[] = { + //info + &sensor_dev_attr_info.dev_attr.attr, + + NULL +}; + +static const struct attribute_group cpld2_group = { + .attrs = cpld2_attributes, +}; + + +/*-----------------------------------------------------------------------*/ + +/* device probe and removal */ + +static int +cpld_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct cpld_data *data; + int status; + +// printk("+%s \n", __func__); + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA)) + return -EIO; + + data = kzalloc(sizeof(struct cpld_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* Register sysfs hooks */ + if(id->driver_data==1) // CPLD2 + status = sysfs_create_group(&client->dev.kobj, &cpld2_group); + else // default CPLD1 + status = sysfs_create_group(&client->dev.kobj, &cpld_group); + + if (status) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&client->dev); + if (IS_ERR(data->hwmon_dev)) { + status = PTR_ERR(data->hwmon_dev); + goto exit_remove; + } + + dev_info(&client->dev, "%s: sensor '%s'\n", + dev_name(data->hwmon_dev), client->name); + + return 0; + +exit_remove: + sysfs_remove_group(&client->dev.kobj, &cpld_group); +exit_free: + i2c_set_clientdata(client, NULL); + kfree(data); + return status; +} + +static int cpld_remove(struct i2c_client *client) +{ + struct cpld_data *data = i2c_get_clientdata(client); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&client->dev.kobj, &cpld_group); + i2c_set_clientdata(client, NULL); + kfree(data); + return 0; +} + +static const struct i2c_device_id cpld_ids[] = { + { "inv_cpld" , 0, }, + { "inv_cpld2", 1, }, + { /* LIST END */ } +}; +MODULE_DEVICE_TABLE(i2c, cpld_ids); + +static struct i2c_driver cpld_driver = { + .class = I2C_CLASS_HWMON, + .driver = { + .name = "inv_cpld", + }, + .probe = cpld_probe, + .remove = cpld_remove, + .id_table = cpld_ids, +}; + +/*-----------------------------------------------------------------------*/ + +/* module glue */ + +static int __init inv_cpld_init(void) +{ + return i2c_add_driver(&cpld_driver); +} + +static void __exit inv_cpld_exit(void) +{ + i2c_del_driver(&cpld_driver); +} + +MODULE_AUTHOR("eddie.lan "); +MODULE_DESCRIPTION("inv cpld driver"); +MODULE_LICENSE("GPL"); + +module_init(inv_cpld_init); +module_exit(inv_cpld_exit); diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_eeprom.c b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_eeprom.c new file mode 100644 index 000000000000..3d13f3b04719 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_eeprom.c @@ -0,0 +1,181 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + + +/* Size of EEPROM in bytes */ +#define EEPROM_SIZE 256 + +#define SLICE_BITS (6) +#define SLICE_SIZE (1 << SLICE_BITS) +#define SLICE_NUM (EEPROM_SIZE/SLICE_SIZE) + +/* Each client has this additional data */ +struct eeprom_data { + struct mutex update_lock; + u8 valid; /* bitfield, bit!=0 if slice is valid */ + unsigned long last_updated[SLICE_NUM]; /* In jiffies, 8 slices */ + u8 data[EEPROM_SIZE]; /* Register values */ +}; + + +static void inv_eeprom_update_client(struct i2c_client *client, u8 slice) +{ + struct eeprom_data *data = i2c_get_clientdata(client); + int i, j; + int ret; + int addr; + + + mutex_lock(&data->update_lock); + + if (!(data->valid & (1 << slice)) || + time_after(jiffies, data->last_updated[slice] + 300 * HZ)) { + dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice); + + addr = slice << SLICE_BITS; + + ret = i2c_smbus_write_byte_data(client, ((u8)addr >> 8) & 0xFF, (u8)addr & 0xFF); + /* select the eeprom address */ + if (ret < 0) { + dev_err(&client->dev, "address set failed\n"); + goto exit; + } + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE)) { + goto exit; + } + + for (i = slice << SLICE_BITS; i < (slice + 1) << SLICE_BITS; i+= SLICE_SIZE) { + for (j = i; j < (i+SLICE_SIZE); j++) { + int res; + + res = i2c_smbus_read_byte(client); + if (res < 0) { + goto exit; + } + + data->data[j] = res & 0xFF; + } + } + + data->last_updated[slice] = jiffies; + data->valid |= (1 << slice); + } + +exit: + mutex_unlock(&data->update_lock); +} + +static ssize_t inv_eeprom_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct eeprom_data *data = i2c_get_clientdata(client); + u8 slice; + + + if (off > EEPROM_SIZE) { + return 0; + } + if (off + count > EEPROM_SIZE) { + count = EEPROM_SIZE - off; + } + if (count == 0) { + return 0; + } + + /* Only refresh slices which contain requested bytes */ + for (slice = off >> SLICE_BITS; slice <= (off + count - 1) >> SLICE_BITS; slice++) { + inv_eeprom_update_client(client, slice); + } + + memcpy(buf, &data->data[off], count); + + return count; +} + +static struct bin_attribute inv_eeprom_attr = { + .attr = { + .name = "eeprom", + .mode = S_IRUGO, + }, + .size = EEPROM_SIZE, + .read = inv_eeprom_read, +}; + +static int inv_eeprom_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct eeprom_data *data; + int err; + + if (!(data = kzalloc(sizeof(struct eeprom_data), GFP_KERNEL))) { + err = -ENOMEM; + goto exit; + } + + memset(data->data, 0xff, EEPROM_SIZE); + i2c_set_clientdata(client, data); + mutex_init(&data->update_lock); + + /* create the sysfs eeprom file */ + err = sysfs_create_bin_file(&client->dev.kobj, &inv_eeprom_attr); + if (err) { + goto exit_kfree; + } + + return 0; + +exit_kfree: + kfree(data); +exit: + return err; +} + +static int inv_eeprom_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &inv_eeprom_attr); + kfree(i2c_get_clientdata(client)); + + return 0; +} + +static const struct i2c_device_id inv_eeprom_id[] = { + { "inv_eeprom", 0 }, + { } +}; + +static struct i2c_driver inv_eeprom_driver = { + .driver = { + .name = "inv_eeprom", + }, + .probe = inv_eeprom_probe, + .remove = inv_eeprom_remove, + .id_table = inv_eeprom_id, +}; + +module_i2c_driver(inv_eeprom_driver); + +MODULE_AUTHOR("Inventec"); +MODULE_DESCRIPTION("Inventec D7054 Mother Board EEPROM driver"); +MODULE_LICENSE("GPL"); + + diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_platform.c b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_platform.c new file mode 100644 index 000000000000..720a4cd2257b --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_platform.c @@ -0,0 +1,239 @@ +#include +//#include +#include +#include +#include +#include +#include +#include +#include +//#include +//#include + +//#include +//#define IO_EXPAND_BASE 64 +//#define IO_EXPAND_NGPIO 16 + +struct inv_i2c_board_info { + int ch; + int size; + struct i2c_board_info *board_info; +}; + +#define bus_id(id) (id) +static struct pca954x_platform_mode mux_modes_0[] = { + {.adap_id = bus_id(2),}, {.adap_id = bus_id(3),}, + {.adap_id = bus_id(4),}, {.adap_id = bus_id(5),}, + {.adap_id = bus_id(6),}, {.adap_id = bus_id(7),}, + {.adap_id = bus_id(8),}, {.adap_id = bus_id(9),}, +}; +static struct pca954x_platform_mode mux_modes_0_0[] = { + {.adap_id = bus_id(10),}, {.adap_id = bus_id(11),}, + {.adap_id = bus_id(12),}, {.adap_id = bus_id(13),}, + {.adap_id = bus_id(14),}, {.adap_id = bus_id(15),}, + {.adap_id = bus_id(16),}, {.adap_id = bus_id(17),}, +}; + +static struct pca954x_platform_mode mux_modes_0_1[] = { + {.adap_id = bus_id(18),}, {.adap_id = bus_id(19),}, + {.adap_id = bus_id(20),}, {.adap_id = bus_id(21),}, + {.adap_id = bus_id(22),}, {.adap_id = bus_id(23),}, + {.adap_id = bus_id(24),}, {.adap_id = bus_id(25),}, +}; + +static struct pca954x_platform_mode mux_modes_0_2[] = { + {.adap_id = bus_id(26),}, {.adap_id = bus_id(27),}, + {.adap_id = bus_id(28),}, {.adap_id = bus_id(29),}, + {.adap_id = bus_id(30),}, {.adap_id = bus_id(31),}, + {.adap_id = bus_id(32),}, {.adap_id = bus_id(33),}, +}; + +static struct pca954x_platform_mode mux_modes_0_3[] = { + {.adap_id = bus_id(34),}, {.adap_id = bus_id(35),}, + {.adap_id = bus_id(36),}, {.adap_id = bus_id(37),}, + {.adap_id = bus_id(38),}, {.adap_id = bus_id(39),}, + {.adap_id = bus_id(40),}, {.adap_id = bus_id(41),}, +}; + +static struct pca954x_platform_mode mux_modes_0_4[] = { + {.adap_id = bus_id(42),}, {.adap_id = bus_id(43),}, + {.adap_id = bus_id(44),}, {.adap_id = bus_id(45),}, + {.adap_id = bus_id(46),}, {.adap_id = bus_id(47),}, + {.adap_id = bus_id(48),}, {.adap_id = bus_id(49),}, +}; + +static struct pca954x_platform_mode mux_modes_0_5[] = { + {.adap_id = bus_id(50),}, {.adap_id = bus_id(51),}, + {.adap_id = bus_id(52),}, {.adap_id = bus_id(53),}, + {.adap_id = bus_id(54),}, {.adap_id = bus_id(55),}, + {.adap_id = bus_id(56),}, {.adap_id = bus_id(57),}, +}; + +static struct pca954x_platform_mode mux_modes_0_6[] = { + {.adap_id = bus_id(58),}, {.adap_id = bus_id(59),}, + {.adap_id = bus_id(60),}, {.adap_id = bus_id(61),}, + {.adap_id = bus_id(62),}, {.adap_id = bus_id(63),}, + {.adap_id = bus_id(64),}, {.adap_id = bus_id(65),}, +}; + +static struct pca954x_platform_mode mux_modes_0_7[] = { + {.adap_id = bus_id(66),}, {.adap_id = bus_id(67),}, + {.adap_id = bus_id(68),}, {.adap_id = bus_id(69),}, + {.adap_id = bus_id(70),}, {.adap_id = bus_id(71),}, + {.adap_id = bus_id(72),}, {.adap_id = bus_id(73),}, +}; + +//no i2c device driver attach to mux 7 + + +static struct pca954x_platform_data mux_data_0 = { + .modes = mux_modes_0, + .num_modes = 8, +}; +static struct pca954x_platform_data mux_data_0_0 = { + .modes = mux_modes_0_0, + .num_modes = 8, +}; +static struct pca954x_platform_data mux_data_0_1 = { + .modes = mux_modes_0_1, + .num_modes = 8, +}; +static struct pca954x_platform_data mux_data_0_2 = { + .modes = mux_modes_0_2, + .num_modes = 8, +}; +static struct pca954x_platform_data mux_data_0_3 = { + .modes = mux_modes_0_3, + .num_modes = 8, +}; +static struct pca954x_platform_data mux_data_0_4 = { + .modes = mux_modes_0_4, + .num_modes = 8, +}; +static struct pca954x_platform_data mux_data_0_5 = { + .modes = mux_modes_0_5, + .num_modes = 8, +}; +static struct pca954x_platform_data mux_data_0_6 = { + .modes = mux_modes_0_6, + .num_modes = 8, +}; +static struct pca954x_platform_data mux_data_0_7 = { + .modes = mux_modes_0_7, + .num_modes = 8, +}; + +static struct i2c_board_info i2c_device_info0[] __initdata = { +// {"inv_psoc", 0, 0x66, 0, 0, 0},//psoc + {"inv_cpld", 0, 0x55, 0, 0, 0},//cpld + {"inv_cpld2", 0, 0x77, 0, 0, 0},//cpld2 + {"pca9548", 0, 0x70, &mux_data_0, 0, 0}, +}; + +static struct i2c_board_info i2c_device_info2[] __initdata = { + {"pca9548", 0, 0x72, &mux_data_0_0, 0, 0}, +}; +static struct i2c_board_info i2c_device_info3[] __initdata = { + {"pca9548", 0, 0x72, &mux_data_0_1, 0, 0}, +}; +static struct i2c_board_info i2c_device_info4[] __initdata = { + {"pca9548", 0, 0x72, &mux_data_0_2, 0, 0}, +}; +static struct i2c_board_info i2c_device_info5[] __initdata = { + {"pca9548", 0, 0x72, &mux_data_0_3, 0, 0}, +}; +static struct i2c_board_info i2c_device_info6[] __initdata = { + {"pca9548", 0, 0x72, &mux_data_0_4, 0, 0}, +}; +static struct i2c_board_info i2c_device_info7[] __initdata = { + {"pca9548", 0, 0x72, &mux_data_0_5, 0, 0}, +}; +static struct i2c_board_info i2c_device_info8[] __initdata = { + {"pca9548", 0, 0x72, &mux_data_0_6, 0, 0}, +}; +static struct i2c_board_info i2c_device_info9[] __initdata = { + {"pca9548", 0, 0x72, &mux_data_0_7, 0, 0}, +}; + + +static struct inv_i2c_board_info i2cdev_list[] = { + {0, ARRAY_SIZE(i2c_device_info0), i2c_device_info0 }, //smbus 0 + + {bus_id(2), ARRAY_SIZE(i2c_device_info2), i2c_device_info2 }, //mux 0 + {bus_id(3), ARRAY_SIZE(i2c_device_info3), i2c_device_info3 }, //mux 1 + {bus_id(4), ARRAY_SIZE(i2c_device_info4), i2c_device_info4 }, //mux 2 + {bus_id(5), ARRAY_SIZE(i2c_device_info5), i2c_device_info5 }, //mux 3 + {bus_id(6), ARRAY_SIZE(i2c_device_info6), i2c_device_info6 }, //mux 4 + {bus_id(7), ARRAY_SIZE(i2c_device_info7), i2c_device_info7 }, //mux 5 + {bus_id(8), ARRAY_SIZE(i2c_device_info8), i2c_device_info8 }, //mux 6 + {bus_id(9), ARRAY_SIZE(i2c_device_info9), i2c_device_info9 }, //mux 7 + +}; + +///////////////////////////////////////////////////////////////////////////////////////// +#if 0 +static struct i2c_gpio_platform_data i2c_gpio_platdata0 = { + .scl_pin = 58, + .sda_pin = 75, + + .udelay = 5, //5:100kHz + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .scl_is_output_only = 0 +}; + +static struct platform_device device_i2c_gpio0 = { + .name = "i2c-gpio", + .id = 1, // adapter number + .dev.platform_data = &i2c_gpio_platdata0, +}; +#endif +static int __init inv_platform_init(void) +{ + struct i2c_adapter *adap = NULL; + struct i2c_client *e = NULL; + int ret = 0; + int i,j,k; + + printk("%s \n", __func__); + +#if 0 + //use i2c-gpio + //register i2c gpio + //config gpio58,75 to gpio function 58=32+3*8+2 75=32*2+8*1+3 gpio69=32*2+8*0+5 + outl( inl(0x533) | (1<<2), 0x533); + outl( inl(0x541) | (1<<3), 0x541); + outl( inl(0x540) | (1<<5), 0x540); //RST_I2C_MUX_N (GPIO69) + outl( inl(0x500) | (1<<7), 0x500); //SYS_RDY_N (GPIO7) + outl( inl(0x501) | (1<<7), 0x501); //BMC_HEART_BEAT (GPIO15) + outl( inl(0x503) | (1<<2)|(1<<3), 0x503); //PSOC_HEART_BEAT(26),CPLD_HEART_BEAT(27) + + ret = platform_device_register(&device_i2c_gpio0); + if (ret) { + printk(KERN_ERR "i2c-gpio: device_i2c_gpio0 register fail %d\n", ret); + } +#endif + for(i=0; i +#include +#include +#include +#include +#include +#include +#include +#include +#include + +//================================= +#include +#include +#include +#include + +#define IPMI_MAX_INTF (4) +#define NETFN_OEM 0x30 +#define CMD_GETDATA 0x31 +#define CMD_SETDATA 0x32 +#define FAN_NUM 4 +#define PSU_NUM 2 + +#define PSU1 0x5800 +#define PSU2 0x5900 +#define BMC_PMBusNumber 3 +#define PMBus_Vender 0x99 +#define PMBus_Serial 0x9E +#define PMBus_Temp2 0x8E +#define PMBus_Version 0x9B +#define MaxLeng_Result 0x20 + +#define MAX_IPMI_RECV_LENGTH 0xff + +static long pmbus_reg2data_linear(int data, int linear16); +struct ipmi_result{ + char result[MAX_IPMI_RECV_LENGTH]; + int result_length; +}; + +DEFINE_MUTEX(ipmi_mutex); +DEFINE_MUTEX(ipmi2_mutex); +static struct ipmi_result ipmiresult; +static struct device *hwmon_dev; +static struct kobject *device_kobj; +static ipmi_user_t ipmi_mh_user = NULL; +static void msg_handler(struct ipmi_recv_msg *msg,void* handler_data); +static struct ipmi_user_hndl ipmi_hndlrs = { .ipmi_recv_hndl = msg_handler,}; + +static atomic_t dummy_count = ATOMIC_INIT(0); +static void dummy_smi_free(struct ipmi_smi_msg *msg) +{ + atomic_dec(&dummy_count); +} +static void dummy_recv_free(struct ipmi_recv_msg *msg) +{ + atomic_dec(&dummy_count); +} +static struct ipmi_smi_msg halt_smi_msg = { + .done = dummy_smi_free +}; +static struct ipmi_recv_msg halt_recv_msg = { + .done = dummy_recv_free +}; + +struct __attribute__ ((__packed__)) psoc_psu_layout { + u16 psu1_iin; + u16 psu2_iin; + u16 psu1_iout; + u16 psu2_iout; + + u16 psu1_pin; + u16 psu2_pin; + u16 psu1_pout; + u16 psu2_pout; + + u16 psu1_vin; + u16 psu2_vin; + u16 psu1_vout; + u16 psu2_vout; +}; + +struct __attribute__ ((__packed__)) psoc_layout { + u8 ctl; //offset: 0 + u16 switch_temp; //offset: 1 + u8 reserve0; //offset: 3 + + u8 fw_upgrade; //offset: 4 + + //i2c bridge + u8 i2c_st; //offset: 5 + u8 i2c_ctl; //offset: 6 + u8 i2c_addr; //offset: 7 + u8 i2c_data[0x20]; //offset: 8 + + //gpo + u8 led_ctl; //offset: 28 + + u8 gpio; //offset: 29 + + //pwm duty + u8 pwm[FAN_NUM]; //offset: 2a + u8 pwm_psu[PSU_NUM]; //offset: 2e + + //fan rpm + u16 fan[FAN_NUM*2]; //offset: 30 + + u8 reserve1[4]; //offset: 40 + + //gpi + u8 gpi_fan; //offset: 44 + + //psu state + u8 psu_state; //offset: 45 + + //temperature + u16 temp[5]; //offset: 46 + u16 temp_psu[PSU_NUM]; //offset: 50 + + //version + u8 version[2]; //offset: 54 + + u8 reserve2[4]; //offset: 56 + struct psoc_psu_layout psu_info; //offset: 5a +}; + +/* definition */ +/* definition */ +#define PSOC_OFF(m) offsetof(struct psoc_layout, m) +#define PSOC_PSU_OFF(m) offsetof(struct psoc_psu_layout, m) + +#define SWITCH_TMP_OFFSET PSOC_OFF(switch_temp) +#define PWM_OFFSET PSOC_OFF(pwm) +#define THERMAL_OFFSET PSOC_OFF(temp) +#define RPM_OFFSET PSOC_OFF(fan) +#define DIAG_FLAG_OFFSET PSOC_OFF(ctl) +#define FAN_LED_OFFSET PSOC_OFF(led_ctl) +#define FAN_GPI_OFFSET PSOC_OFF(gpi_fan) +#define PSOC_PSU_OFFSET PSOC_OFF(psu_state) +#define VERSION_OFFSET PSOC_OFF(version) +#define PSU_INFO_OFFSET PSOC_OFF(psu_info) + + +static void msg_handler(struct ipmi_recv_msg *recv_msg,void* handler_data) +{ + struct ipmi_result *msg_result = recv_msg->user_msg_data; + + if(recv_msg->msg.data[0]==0 && recv_msg->msg.data_len>0) { + msg_result->result_length=recv_msg->msg.data_len-1; + memcpy(msg_result->result, &recv_msg->msg.data[1], recv_msg->msg.data_len-1); + } + ipmi_free_recv_msg(recv_msg); + mutex_unlock(&ipmi_mutex); + + return; +} + +int start_ipmi_command(char NetFn, char cmd,char *data,int data_length, char* result, int* result_length) +{ + int rv=0,i; + int timeout; + + //wait previous command finish at least 50msec + timeout=50; + while((mutex_is_locked(&ipmi_mutex) == 1 || (mutex_is_locked(&ipmi2_mutex) == 1)) && (--timeout)>0) { usleep_range(1000,1010); } + if(timeout==0) { return -1; } + mutex_lock(&ipmi_mutex); + mutex_lock(&ipmi2_mutex); + + if(ipmi_mh_user == NULL) { + for (i=0,rv=1; i0) { usleep_range(1000,1100);} + if(timeout==0) { + mutex_unlock(&ipmi2_mutex); + return -1; + } + else { + *result_length=ipmiresult.result_length; + memcpy(result,ipmiresult.result,*result_length); + mutex_unlock(&ipmi2_mutex); + return 0; + } + } + return 0; +} +EXPORT_SYMBOL(start_ipmi_command); + +static ssize_t psoc_ipmi_read(u8 *buf, u8 offset, size_t count) +{ + uint8_t data[2]; + int result_len=0; + int rv; + + data[0] = offset; + data[1] = count; + + rv=start_ipmi_command(NETFN_OEM, CMD_GETDATA,data,2, buf, &result_len); + + return result_len; +} + +static ssize_t psoc_ipmi_write(char *buf, unsigned offset, size_t count) +{ + uint8_t data[count+1],result[1]; + int result_len; + + data[0] = offset; + memcpy(&data[1],buf,count); + + start_ipmi_command(NETFN_OEM, CMD_SETDATA,data,count+1, result, &result_len); + return count; +} + + +static u16 psoc_read16(u8 offset) +{ + u16 value = 0; + u8 buf[]={0,0}; + + if(psoc_ipmi_read(buf, offset, 2) == 2) + value = (buf[0]<<8 | buf[1]<<0); + + return value; +} + +static u8 psoc_read8(u8 offset) +{ + u8 value = 0; + u8 buf = 0; + + if(psoc_ipmi_read(&buf, offset, 1) == 1) + value = buf; + + return value; +} + +/* +CPLD report the PSU0 status +000 = PSU normal operation +100 = PSU fault +010 = PSU unpowered +111 = PSU not installed + +7 6 | 5 4 3 | 2 1 0 +---------------------- + | psu1 | psu0 +*/ +static char* psu_str[] = { + "normal", //000 + "NA", //001 + "unpowered", //010 + "NA", //011 + "fault", //100 + "NA", //101 + "NA", //110 + "not installed", //111 +}; + +static ssize_t show_psu_st(struct device *dev, struct device_attribute *da, + char *buf) +{ + u32 status=0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + u8 byte=0; + int shift = (attr->index == 0)?3:0; + + status = psoc_ipmi_read(&byte, PSOC_PSU_OFFSET, 1); + + byte = (byte >> shift) & 0x7; + + status = sprintf (buf, "%d : %s\n", byte, psu_str[byte]); + + return strlen(buf); +} + +static ssize_t show_ipmi_pmbus(struct device *dev, struct device_attribute *da, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + uint8_t data[4],result[MaxLeng_Result]; + int result_len=0; + + data[0] = BMC_PMBusNumber; + data[1] = (attr->index & 0xFF00 ) >>7; + data[3] = attr->index & 0xff; + if(data[3]==PMBus_Temp2) + {data[2]=2;} + else + {data[2]=MaxLeng_Result;} + + if(start_ipmi_command(0x06, 0x52,data,4, result, &result_len)==0) + { + if(data[3]==PMBus_Temp2) + { + return sprintf(buf, "%ld \n", pmbus_reg2data_linear(result[0] | (result[1]<<8), 0 )); + } + result[result[0]+1]='\0'; + return sprintf(buf, "%s\n",&result[1] ); + } + else + { + return 0; + } +} + +static ssize_t show_thermal(struct device *dev, struct device_attribute *da, + char *buf) +{ + int status=0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + u8 offset = attr->index * 2 + THERMAL_OFFSET; + + status = psoc_read16(offset); + + return sprintf(buf, "%d\n", + (s8)(status>>8) * 1000 ); +} + +static ssize_t show_pwm(struct device *dev, struct device_attribute *da, + char *buf) +{ + int status=0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + u8 offset = attr->index + PWM_OFFSET; + + status = psoc_read8(offset); + + return sprintf(buf, "%d\n", + status); +} + +static ssize_t set_pwm(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + u8 offset = attr->index + PWM_OFFSET; + + u8 pwm = simple_strtol(buf, NULL, 10); + if(pwm > 255) pwm = 255; + + psoc_ipmi_write(&pwm, offset, 1); + + return count; +} + + +static ssize_t show_rpm(struct device *dev, struct device_attribute *da, + char *buf) +{ + int status=0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + u8 offset = attr->index*2 + RPM_OFFSET; + + status = psoc_read16(offset); + + return sprintf(buf, "%d\n", + status); +} + +static ssize_t show_switch_tmp(struct device *dev, struct device_attribute *da, + char *buf) +{ + u16 status=0; + u16 temp = 0; + + status = psoc_ipmi_read((u8*)&temp, SWITCH_TMP_OFFSET, 2); + + status = sprintf (buf, "%d\n", (s8)(temp>>8) * 1000 ); + + return strlen(buf); +} + +static ssize_t set_switch_tmp(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + long temp = simple_strtol(buf, NULL, 10); + u16 temp2 = ( (temp/1000) <<8 ) & 0xFF00 ; + + //printk("set_switch_tmp temp=%d, temp2=0x%x (%x,%x)\n", temp, temp2, ( ( (temp/1000) <<8 ) & 0xFF00 ), (( (temp%1000) / 10 ) & 0xFF)); + psoc_ipmi_write((u8*)&temp2, SWITCH_TMP_OFFSET, 2); + + + return count; +} + +static ssize_t show_diag(struct device *dev, struct device_attribute *da, + char *buf) +{ + u16 status=0; + u8 diag_flag = 0; + + status = psoc_ipmi_read((u8*)&diag_flag, DIAG_FLAG_OFFSET, 1); + + status = sprintf (buf, "%d\n", ((diag_flag & 0x80)?1:0)); + + return strlen(buf); +} + +static ssize_t set_diag(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + u8 value = 0; + u8 diag = simple_strtol(buf, NULL, 10); + + diag = diag?1:0; + + psoc_ipmi_read((u8*)&value, DIAG_FLAG_OFFSET, 1); + if(diag) value |= (1<<7); + else value &= ~(1<<7); + psoc_ipmi_write((u8*)&value, DIAG_FLAG_OFFSET, 1); + + return count; +} + +static ssize_t show_version(struct device *dev, struct device_attribute *da, + char *buf) +{ + u16 status=0; + + status = psoc_read16(VERSION_OFFSET); + + return sprintf(buf, "ver: %x.%x\n", (status & 0xFF00)>>8, (status & 0xFF) ); +} + +static ssize_t show_name(struct device *dev, struct device_attribute *da, + char *buf) +{ + return sprintf (buf, "inv_psoc\n"); +} + + +static ssize_t show_fan_led(struct device *dev, struct device_attribute *da, + char *buf) +{ + int status=0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + u8 bit = attr->index; + + status = psoc_read8(FAN_LED_OFFSET); + + return sprintf(buf, "%d\n", + (status & (1<index; + u8 led_state = 0; + + u8 v = simple_strtol(buf, NULL, 10); + + led_state = psoc_read8(FAN_LED_OFFSET); + if(v) led_state |= (1<index; + + status = psoc_read8(offset); + + return sprintf(buf, "0x%02X\n", status ); +} + +static long pmbus_reg2data_linear(int data, int linear16) +{ + s16 exponent; + s32 mantissa; + long val; + + if (linear16) { /* LINEAR16 */ + exponent = -9; + mantissa = (u16) data; + } else { /* LINEAR11 */ + exponent = ((s16)data) >> 11; + exponent = ((s16)( data & 0xF800) ) >> 11; + mantissa = ((s32)((data & 0x7ff) << 5)) >> 5; + } + + //printk("data=%d, m=%d, e=%d\n", data, exponent, mantissa); + val = mantissa; + + /* scale result to micro-units for power sensors */ + val = val * 1000L; + + if (exponent >= 0) + val <<= exponent; + else + val >>= -exponent; + + return val; +} + +static ssize_t show_psu_psoc(struct device *dev, struct device_attribute *da, + char *buf) +{ + u16 status=0; + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + u8 offset = attr->index + PSU_INFO_OFFSET; + + status = psoc_read16(offset); + + return sprintf(buf, "%ld \n", pmbus_reg2data_linear(status, strstr(attr->dev_attr.attr.name, "vout")? 1:0 )); +} + + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_thermal, 0, 0); +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_thermal, 0, 1); +static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_thermal, 0, 2); +static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_thermal, 0, 3); +static SENSOR_DEVICE_ATTR(temp5_input, S_IRUGO, show_thermal, 0, 4); +static SENSOR_DEVICE_ATTR(thermal_psu1, S_IRUGO, show_thermal, 0, 5); +static SENSOR_DEVICE_ATTR(thermal_psu2, S_IRUGO, show_thermal, 0, 6); + +static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 0); +static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 1); +static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 2); +static SENSOR_DEVICE_ATTR(pwm4, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 3); +static SENSOR_DEVICE_ATTR(pwm_psu1, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 4); +static SENSOR_DEVICE_ATTR(pwm_psu2, S_IWUSR|S_IRUGO, show_pwm, set_pwm, 5); + +static SENSOR_DEVICE_ATTR(psu0, S_IRUGO, show_psu_st, 0, 0); +static SENSOR_DEVICE_ATTR(psu1, S_IRUGO, show_psu_st, 0, 1); + +static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_rpm, 0, 0); +static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_rpm, 0, 1); +static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_rpm, 0, 2); +static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_rpm, 0, 3); +static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_rpm, 0, 4); +static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_rpm, 0, 5); +static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_rpm, 0, 6); +static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_rpm, 0, 7); +static SENSOR_DEVICE_ATTR(rpm_psu1, S_IRUGO, show_rpm, 0, 8); +static SENSOR_DEVICE_ATTR(rpm_psu2, S_IRUGO, show_rpm, 0, 9); + +static SENSOR_DEVICE_ATTR(switch_tmp, S_IWUSR|S_IRUGO, show_switch_tmp, set_switch_tmp, 0); + +static SENSOR_DEVICE_ATTR(diag, S_IWUSR|S_IRUGO, show_diag, set_diag, 0); +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, 0, 0); +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); + +static SENSOR_DEVICE_ATTR(fan_led_grn1, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 0); +static SENSOR_DEVICE_ATTR(fan_led_grn2, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 1); +static SENSOR_DEVICE_ATTR(fan_led_grn3, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 2); +static SENSOR_DEVICE_ATTR(fan_led_grn4, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 3); +static SENSOR_DEVICE_ATTR(fan_led_red1, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 4); +static SENSOR_DEVICE_ATTR(fan_led_red2, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 5); +static SENSOR_DEVICE_ATTR(fan_led_red3, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 6); +static SENSOR_DEVICE_ATTR(fan_led_red4, S_IWUSR|S_IRUGO, show_fan_led, set_fan_led, 7); + +static SENSOR_DEVICE_ATTR(fan_gpi, S_IRUGO, show_value8, 0, FAN_GPI_OFFSET); +static SENSOR_DEVICE_ATTR(psoc_psu1_vin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_vin)); +static SENSOR_DEVICE_ATTR(psoc_psu1_vout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_vout)); +static SENSOR_DEVICE_ATTR(psoc_psu1_iin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_iin)); +static SENSOR_DEVICE_ATTR(psoc_psu1_iout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_iout)); +static SENSOR_DEVICE_ATTR(psoc_psu1_pin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_pin)); +static SENSOR_DEVICE_ATTR(psoc_psu1_pout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu1_pout)); + + +static SENSOR_DEVICE_ATTR(psoc_psu2_vin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_vin)); +static SENSOR_DEVICE_ATTR(psoc_psu2_vout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_vout)); +static SENSOR_DEVICE_ATTR(psoc_psu2_iin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_iin)); +static SENSOR_DEVICE_ATTR(psoc_psu2_iout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_iout)); +static SENSOR_DEVICE_ATTR(psoc_psu2_pin, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_pin)); +static SENSOR_DEVICE_ATTR(psoc_psu2_pout, S_IRUGO, show_psu_psoc, 0, PSOC_PSU_OFF(psu2_pout)); + +//IPMI +static SENSOR_DEVICE_ATTR(thermal2_psu1, S_IRUGO, show_ipmi_pmbus, 0, PSU1 | PMBus_Temp2); +static SENSOR_DEVICE_ATTR(psoc_psu1_vender, S_IRUGO, show_ipmi_pmbus, 0, PSU1 | PMBus_Vender); +static SENSOR_DEVICE_ATTR(psoc_psu1_serial, S_IRUGO, show_ipmi_pmbus, 0, PSU1 | PMBus_Serial); +static SENSOR_DEVICE_ATTR(psoc_psu1_version, S_IRUGO, show_ipmi_pmbus, 0, PSU1 | PMBus_Version); + +static SENSOR_DEVICE_ATTR(thermal2_psu2, S_IRUGO, show_ipmi_pmbus, 0, PSU2 | PMBus_Temp2); +static SENSOR_DEVICE_ATTR(psoc_psu2_vender, S_IRUGO, show_ipmi_pmbus, 0, PSU2 | PMBus_Vender); +static SENSOR_DEVICE_ATTR(psoc_psu2_serial, S_IRUGO, show_ipmi_pmbus, 0, PSU2 | PMBus_Serial); +static SENSOR_DEVICE_ATTR(psoc_psu2_version, S_IRUGO, show_ipmi_pmbus, 0, PSU2 | PMBus_Version); + + +static struct attribute *psoc_attributes[] = { + //thermal + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp2_input.dev_attr.attr, + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp4_input.dev_attr.attr, + &sensor_dev_attr_temp5_input.dev_attr.attr, + + &sensor_dev_attr_thermal_psu1.dev_attr.attr, + &sensor_dev_attr_thermal_psu2.dev_attr.attr, + + + //pwm + &sensor_dev_attr_pwm1.dev_attr.attr, + &sensor_dev_attr_pwm2.dev_attr.attr, + &sensor_dev_attr_pwm3.dev_attr.attr, + &sensor_dev_attr_pwm4.dev_attr.attr, + &sensor_dev_attr_pwm_psu1.dev_attr.attr, + &sensor_dev_attr_pwm_psu2.dev_attr.attr, + + //rpm + &sensor_dev_attr_fan1_input.dev_attr.attr, + &sensor_dev_attr_fan2_input.dev_attr.attr, + &sensor_dev_attr_fan3_input.dev_attr.attr, + &sensor_dev_attr_fan4_input.dev_attr.attr, + &sensor_dev_attr_fan5_input.dev_attr.attr, + &sensor_dev_attr_fan6_input.dev_attr.attr, + &sensor_dev_attr_fan7_input.dev_attr.attr, + &sensor_dev_attr_fan8_input.dev_attr.attr, + + &sensor_dev_attr_rpm_psu1.dev_attr.attr, + &sensor_dev_attr_rpm_psu2.dev_attr.attr, + + //switch temperature + &sensor_dev_attr_switch_tmp.dev_attr.attr, + + //diag flag + &sensor_dev_attr_diag.dev_attr.attr, + + //version + &sensor_dev_attr_version.dev_attr.attr, + + //fan led + &sensor_dev_attr_fan_led_grn1.dev_attr.attr, + &sensor_dev_attr_fan_led_grn2.dev_attr.attr, + &sensor_dev_attr_fan_led_grn3.dev_attr.attr, + &sensor_dev_attr_fan_led_grn4.dev_attr.attr, + &sensor_dev_attr_fan_led_red1.dev_attr.attr, + &sensor_dev_attr_fan_led_red2.dev_attr.attr, + &sensor_dev_attr_fan_led_red3.dev_attr.attr, + &sensor_dev_attr_fan_led_red4.dev_attr.attr, + + //fan GPI + &sensor_dev_attr_fan_gpi.dev_attr.attr, + &sensor_dev_attr_psu0.dev_attr.attr, + &sensor_dev_attr_psu1.dev_attr.attr, + + + //psu_psoc + &sensor_dev_attr_psoc_psu1_vin.dev_attr.attr, + &sensor_dev_attr_psoc_psu1_vout.dev_attr.attr, + &sensor_dev_attr_psoc_psu1_iin.dev_attr.attr, + &sensor_dev_attr_psoc_psu1_iout.dev_attr.attr, + &sensor_dev_attr_psoc_psu1_pin.dev_attr.attr, + &sensor_dev_attr_psoc_psu1_pout.dev_attr.attr, + &sensor_dev_attr_psoc_psu2_vin.dev_attr.attr, + &sensor_dev_attr_psoc_psu2_vout.dev_attr.attr, + &sensor_dev_attr_psoc_psu2_iin.dev_attr.attr, + &sensor_dev_attr_psoc_psu2_iout.dev_attr.attr, + &sensor_dev_attr_psoc_psu2_pin.dev_attr.attr, + &sensor_dev_attr_psoc_psu2_pout.dev_attr.attr, + + //ipmi_i2c_command + &sensor_dev_attr_thermal2_psu1.dev_attr.attr, + &sensor_dev_attr_psoc_psu1_vender.dev_attr.attr, + &sensor_dev_attr_psoc_psu1_serial.dev_attr.attr, + &sensor_dev_attr_psoc_psu1_version.dev_attr.attr, + + &sensor_dev_attr_thermal2_psu2.dev_attr.attr, + &sensor_dev_attr_psoc_psu2_vender.dev_attr.attr, + &sensor_dev_attr_psoc_psu2_serial.dev_attr.attr, + &sensor_dev_attr_psoc_psu2_version.dev_attr.attr, + + &sensor_dev_attr_name.dev_attr.attr, + + NULL +}; + +static const struct attribute_group psoc_group = { + .attrs = psoc_attributes, +}; + +static int __init inv_psoc_init(void) +{ + int ret; + + printk("+%s\n", __func__); + + hwmon_dev = hwmon_device_register(NULL); + if (IS_ERR(hwmon_dev)) { + goto fail_hwmon_device_register; + } + + device_kobj = kobject_create_and_add("device", &hwmon_dev->kobj); + if(!device_kobj) { + goto fail_hwmon_device_register; + } + + ret = sysfs_create_group(device_kobj, &psoc_group); + if (ret) { + goto fail_create_group_hwmon; + } + + printk(" Enable IPMI PSoC protocol.\n"); + return ret; + +fail_create_group_hwmon: + hwmon_device_unregister(hwmon_dev); +fail_hwmon_device_register: + return -ENOMEM; +} + +static void __exit inv_psoc_exit(void) +{ + if(ipmi_mh_user!=NULL) {ipmi_destroy_user(ipmi_mh_user);} + if(hwmon_dev != NULL) hwmon_device_unregister(hwmon_dev); + sysfs_remove_group(device_kobj, &psoc_group); +} + +MODULE_AUTHOR("Ting.Jack "); +MODULE_DESCRIPTION("inv psoc driver"); +MODULE_LICENSE("GPL"); + +module_init(inv_psoc_init); +module_exit(inv_psoc_exit); + diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_swps.c b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_swps.c new file mode 100644 index 000000000000..58c1a0aeb048 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_swps.c @@ -0,0 +1,719 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "inv_swps.h" + +static int port_major; +static int ioexp_total; +static int port_total; +static struct class *swp_class_p = NULL; +static struct inv_platform_s *platform_p = NULL; +static struct inv_ioexp_layout_s *ioexp_layout = NULL; +static struct inv_port_layout_s *port_layout = NULL; + +static int +__swp_match(struct device *dev,const void *data){ + + char *name = (char *)data; + if (strcmp(dev_name(dev), name) == 0) + return 1; + return 0; +} + + +struct device * +get_swpdev_by_name(char *name){ + struct device *dev = class_find_device(swp_class_p, + NULL, + name, + (const void *)__swp_match); + return dev; +} + + +static int +sscanf_2_int(const char *buf) { + + int result = -EBFONT; + char *hex_tag = "0x"; + + if (strcspn(buf, hex_tag) == 0) { + if (sscanf(buf,"%x",&result)) { + return result; + } + } else { + if (sscanf(buf,"%d",&result)) { + return result; + } + if(sscanf(buf,"-%d",&result)) { + return -result; + } + if (sscanf(buf,"%x",&result)) { + return result; + } + } + return -EBFONT; +} + + +static int +sscanf_2_binary(const char *buf) { + + int result = sscanf_2_int(buf); + + if (result < 0){ + return -EBFONT; + } + switch (result) { + case 0: + case 1: + return result; + default: + break; + } + return -EBFONT; +} + +/* ========== Show functions: For I/O Expander attribute ========== + */ +static ssize_t +_show_ioexp_binary_attr(struct transvr_obj_s *tobj_p, + int (*get_func)(struct ioexp_obj_s *ioexp_p, int voffset), + char *buf_p) { + size_t len; + struct ioexp_obj_s *ioexp_p = tobj_p->ioexp_obj_p; + + if (!ioexp_p) { + SWPS_ERR(" %s: data corruption! :%s\n", __func__, tobj_p->swp_name); + return -ENODATA; + } + mutex_lock(&ioexp_p->lock); + len = snprintf(buf_p, 8, "%d\n", get_func(ioexp_p, tobj_p->ioexp_virt_offset)); + mutex_unlock(&ioexp_p->lock); + return len; +} + + +static ssize_t +show_attr_present(struct device *dev_p, + struct device_attribute *attr_p, + char *buf_p){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p){ + return -ENODEV; + } + return _show_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->get_present, + buf_p); +} + +static ssize_t +show_attr_tx_fault(struct device *dev_p, + struct device_attribute *attr_p, + char *buf_p){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p){ + return -ENODEV; + } + return _show_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->get_tx_fault, + buf_p); +} + +static ssize_t +show_attr_rxlos(struct device *dev_p, + struct device_attribute *attr_p, + char *buf_p){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p){ + return -ENODEV; + } + return _show_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->get_rxlos, + buf_p); +} + +static ssize_t +show_attr_tx_disable(struct device *dev_p, + struct device_attribute *attr_p, + char *buf_p){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p){ + return -ENODEV; + } + return _show_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->get_tx_disable, + buf_p); +} + +static ssize_t +show_attr_reset(struct device *dev_p, + struct device_attribute *attr_p, + char *buf_p){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p){ + return -ENODEV; + } + return _show_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->get_reset, + buf_p); +} + +static ssize_t +show_attr_lpmod(struct device *dev_p, + struct device_attribute *attr_p, + char *buf_p){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p){ + return -ENODEV; + } + return _show_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->get_lpmod, + buf_p); +} + + +static ssize_t +show_attr_modsel(struct device *dev_p, + struct device_attribute *attr_p, + char *buf_p){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p){ + return -ENODEV; + } + return _show_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->get_modsel, + buf_p); +} + +/* ========== Store functions: For I/O Expander (R/W) attribute ========== + */ +static ssize_t +_store_ioexp_binary_attr(struct transvr_obj_s *tobj_p, + int (*set_func)(struct ioexp_obj_s *ioexp_p, + int virt_offset, int input_val), + const char *buf_p, + size_t count) { + + int input, err; + struct ioexp_obj_s *ioexp_p = tobj_p->ioexp_obj_p; + + if (!ioexp_p) { + SWPS_ERR("%s: data corruption! :%s\n", + __func__, tobj_p->swp_name); + return -ENODATA; + } + input = sscanf_2_binary(buf_p); + if (input < 0) { + return -EBFONT; + } + mutex_lock(&ioexp_p->lock); + err = set_func(ioexp_p, tobj_p->ioexp_virt_offset, input); + mutex_unlock(&ioexp_p->lock); + if (err < 0){ + return err; + } + return count; +} + +static ssize_t +store_attr_tx_disable(struct device *dev_p, + struct device_attribute *attr_p, + const char *buf_p, + size_t count){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p) { + return -ENODEV; + } + return _store_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->set_tx_disable, + buf_p, + count); +} + +static ssize_t +store_attr_reset(struct device *dev_p, + struct device_attribute *attr_p, + const char *buf_p, + size_t count){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p) { + return -ENODEV; + } + return _store_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->set_reset, + buf_p, + count); +} + + +static ssize_t +store_attr_lpmod(struct device *dev_p, + struct device_attribute *attr_p, + const char *buf_p, + size_t count){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p) { + return -ENODEV; + } + return _store_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->set_lpmod, + buf_p, + count); +} + + +static ssize_t +store_attr_modsel(struct device *dev_p, + struct device_attribute *attr_p, + const char *buf_p, + size_t count){ + + struct transvr_obj_s *tobj_p = dev_get_drvdata(dev_p); + if (!tobj_p) { + return -ENODEV; + } + return _store_ioexp_binary_attr(tobj_p, + tobj_p->ioexp_obj_p->set_modsel, + buf_p, + count); +} + +/* ========== IO Expander attribute: from expander ========== + */ +static DEVICE_ATTR(present, S_IRUGO, show_attr_present, NULL); +static DEVICE_ATTR(tx_fault, S_IRUGO, show_attr_tx_fault, NULL); +static DEVICE_ATTR(rxlos, S_IRUGO, show_attr_rxlos, NULL); +static DEVICE_ATTR(tx_disable, S_IRUGO|S_IWUSR, show_attr_tx_disable, store_attr_tx_disable); +static DEVICE_ATTR(reset, S_IRUGO|S_IWUSR, show_attr_reset, store_attr_reset); +static DEVICE_ATTR(lpmod, S_IRUGO|S_IWUSR, show_attr_lpmod, store_attr_lpmod); +static DEVICE_ATTR(modsel, S_IRUGO|S_IWUSR, show_attr_modsel, store_attr_modsel); + +/* ========== Functions for module handling ========== + */ +static void +clean_port_obj(void){ + + dev_t dev_num; + char dev_name[32]; + struct device *device_p; + struct transvr_obj_s *transvr_obj_p; + int minor_curr, port_id; + + for (minor_curr=0; minor_curri2c_client_p); + kfree(transvr_obj_p); + } + dev_num = MKDEV(port_major, minor_curr); + device_unregister(device_p); + device_destroy(swp_class_p, dev_num); + } + SWPS_DEBUG("%s: done.\n", __func__); +} + + +static int +get_platform_type(void){ + + char log_msg[64] = "ERROR"; + + platform_p = kzalloc(sizeof(struct inv_platform_s), GFP_KERNEL); + if (!platform_p){ + snprintf(log_msg, sizeof(log_msg), "kzalloc fail"); + goto err_get_platform_type_1; + } + platform_p->id = PLATFORM_SETTINGS; + memset(platform_p->name, 0, sizeof(platform_p->name)); + snprintf(platform_p->name, (sizeof(platform_p->name) - 1), + "%s", platform_map.name); + snprintf(log_msg, sizeof(log_msg), + "User setup platform: %d (%s)", + platform_p->id, platform_p->name); + SWPS_DEBUG("%s: %s, :%d\n", __func__, log_msg, PLATFORM_SETTINGS); + return 0; + +err_get_platform_type_1: + SWPS_ERR("%s: %s :%d\n", __func__, log_msg, PLATFORM_SETTINGS); + return -1; +} + + +static int +get_layout_info(void){ + ioexp_layout = secquoia_ioexp_layout; + port_layout = secquoia_port_layout; + ioexp_total = ARRAY_SIZE(secquoia_ioexp_layout); + port_total = ARRAY_SIZE(secquoia_port_layout); + + SWPS_INFO("Start to initial platform: %d (%s)\n", + platform_p->id, platform_p->name); + return 0; +} + +/* ========== Functions for register something ========== + */ + +static int +register_ioexp_attr_sfp_1(struct device *device_p){ + /* Support machine type: + * - SFP : Magnolia + */ + char *err_attr = NULL; + + if (device_create_file(device_p, &dev_attr_present) < 0) { + err_attr = "dev_attr_present"; + goto err_ioexp_sfp1_attr; + } + if (device_create_file(device_p, &dev_attr_tx_fault) < 0) { + err_attr = "dev_attr_tx_fault"; + goto err_ioexp_sfp1_attr; + } + if (device_create_file(device_p, &dev_attr_rxlos) < 0) { + err_attr = "dev_attr_rxlos"; + goto err_ioexp_sfp1_attr; + } + if (device_create_file(device_p, &dev_attr_tx_disable) < 0) { + err_attr = "dev_attr_tx_disable"; + goto err_ioexp_sfp1_attr; + } + return 0; + +err_ioexp_sfp1_attr: + SWPS_ERR("Add device attribute:%s failure! \n",err_attr); + return -1; +} + +static int +register_ioexp_attr_sfp_2(struct device *device_p){ + /* Support machine type: + * - SFP28 : Cypress + */ + char *err_attr = NULL; + + if (register_ioexp_attr_sfp_1(device_p) < 0){ + goto err_ioexp_sfp2_attr; + } + return 0; + +err_ioexp_sfp2_attr: + SWPS_ERR("Add device attribute:%s failure! \n",err_attr); + return -1; +} + +static int +register_ioexp_attr_qsfp_1(struct device *device_p){ + /* Support machine type: + * - QSFP : Magnolia, Redwood, Hudson32i + * - QSFP+ : Magnolia, Redwood, Hudson32i + * - QSFP28: Redwood + */ + char *err_attr = NULL; + + if (device_create_file(device_p, &dev_attr_present) < 0) { + err_attr = "dev_attr_present"; + goto err_ioexp_qsfp1_attr; + } + if (device_create_file(device_p, &dev_attr_reset) < 0) { + err_attr = "dev_attr_reset"; + goto err_ioexp_qsfp1_attr; + } + if (device_create_file(device_p, &dev_attr_lpmod) < 0) { + err_attr = "dev_attr_lpmod"; + goto err_ioexp_qsfp1_attr; + } + if (device_create_file(device_p, &dev_attr_modsel) < 0) { + err_attr = "dev_attr_modsel"; + goto err_ioexp_qsfp1_attr; + } + return 0; + +err_ioexp_qsfp1_attr: + SWPS_ERR("Add device attribute:%s failure! \n",err_attr); + return -1; +} + +static int +register_ioexp_attr(struct device *device_p, + struct transvr_obj_s *transvr_obj){ + + char *err_msg = "ERR"; + + switch (transvr_obj->ioexp_obj_p->ioexp_type){ + case IOEXP_TYPE_SEQUOIA_NABC: + if (register_ioexp_attr_qsfp_1(device_p) < 0){ + err_msg = "register_ioexp_attr_qsfp_1 fail"; + goto err_reg_ioexp_attr; + } + + break; + + default: + err_msg = "Unknow type"; + goto err_reg_ioexp_attr; + } + return 0; + +err_reg_ioexp_attr: + SWPS_ERR("%s: %s :%d \n", + __func__, err_msg, transvr_obj->ioexp_obj_p->ioexp_type); + return -1; +} + + +static int +register_port_device(char *dev_name, + dev_t dev_num, + struct transvr_obj_s *transvr_obj){ + + struct device *device_p = NULL; + device_p = device_create(swp_class_p, /* struct class *cls */ + NULL, /* struct device *parent */ + dev_num, /* dev_t devt */ + transvr_obj, /* void *private_data */ + dev_name); /* const char *fmt */ + if (IS_ERR(device_p)){ + goto err_regswp_create_dev; + } + if (register_ioexp_attr(device_p, transvr_obj) < 0){ + goto err_regswp_reg_attr; + } + return 0; + +err_regswp_reg_attr: + device_unregister(device_p); + device_destroy(swp_class_p, dev_num); +err_regswp_create_dev: + SWPS_ERR("%s fail! :%s\n", __func__, dev_name); + return -1; +} + + +static int +register_swp_module(void){ + + dev_t port_devt = 0; + int dev_total = port_total + 1; /* char_dev for module control */ + + if (alloc_chrdev_region(&port_devt, 0, dev_total, SWP_CLS_NAME) < 0){ + SWPS_WARN("Allocate PORT MAJOR failure! \n"); + goto err_register_swp_module_3; + } + port_major = MAJOR(port_devt); + + /* Create class object */ + swp_class_p = class_create(THIS_MODULE, SWP_CLS_NAME); + if (IS_ERR(swp_class_p)) { + SWPS_ERR("Create class failure! \n"); + goto err_register_swp_module_3; + } + return 0; + +err_register_swp_module_3: + unregister_chrdev_region(MKDEV(port_major, 0), port_total); + return -1; +} + + +/* ========== Module initial relate ========== + */ +static int +create_ioexp_objs(void) { + + int i, run_mod; + + /* Clean IOEXP object */ + clean_ioexp_objs(); + /* Get running mode */ + run_mod = IOEXP_MODE_DIRECT; + /* Create IOEXP object */ + for(i=0; i devlen_max) { + snprintf(err_msg, sizeof(err_msg), + "SWP_DEV_PORT too long!"); + goto err_initport_create_tranobj; + } + memset(dev_name, 0, sizeof(dev_name)); + snprintf(dev_name, devlen_max, "%s%d", SWP_DEV_PORT, port_id); + /* Create transceiver object */ + ioexp_obj_p = get_ioexp_obj(ioexp_id); + if (!ioexp_obj_p){ + snprintf(err_msg, sizeof(err_msg), + "IOEXP object:%d not exist", ioexp_id); + goto err_initport_create_tranobj; + } + transvr_obj_p = create_transvr_obj(dev_name, chan_id, ioexp_obj_p, + ioexp_virt_offset, transvr_type, + chipset_type, run_mod); + if (!transvr_obj_p){ + snprintf(err_msg, sizeof(err_msg), + "Create transceiver object fail :%s", dev_name); + goto err_initport_create_tranobj; + } + /* Setup Lane_ID mapping */ + i = ARRAY_SIZE(port_layout[minor_curr].lane_id); + j = ARRAY_SIZE(transvr_obj_p->lane_id); + if (i != j) { + snprintf(err_msg, sizeof(err_msg), + "Lane_id size inconsistent %d/%d", i, j); + goto err_initport_reg_device; + } + memcpy(transvr_obj_p->lane_id, port_layout[minor_curr].lane_id, i*sizeof(int)); + /* Create and register device object */ + if (register_port_device(dev_name, MKDEV(port_major, minor_curr), transvr_obj_p) < 0){ + snprintf(err_msg, sizeof(err_msg), + "register_port_device fail"); + goto err_initport_reg_device; + } + /* Setup device_ptr of transvr_obj */ + dev_p = get_swpdev_by_name(dev_name); + if (!dev_p){ + snprintf(err_msg, sizeof(err_msg), + "get_swpdev_by_name fail"); + goto err_initport_reg_device; + } + transvr_obj_p->transvr_dev_p = dev_p; + /* Success */ + ok_count++; + } + SWPS_INFO("%s: initialed %d port-dev",__func__, ok_count); + return 0; + +err_initport_reg_device: + kfree(transvr_obj_p); +err_initport_create_tranobj: + clean_port_obj(); + SWPS_ERR("%s: %s", __func__, err_msg); + SWPS_ERR("Dump: :%d :%d :%d :%d :%d :%d\n", + port_id, chan_id, ioexp_id, ioexp_virt_offset, transvr_type, run_mod); + return -1; +} + +static int __init +swp_module_init(void){ + + if (get_platform_type() < 0){ + goto err_init_out; + } + if (get_layout_info() < 0){ + goto err_init_out; + } + if (register_swp_module() < 0){ + goto err_init_out; + } + if (create_ioexp_objs() < 0){ + goto err_init_ioexp; + } + if (create_port_objs() < 0){ + goto err_init_portobj; + } + if (init_ioexp_objs() < 0){ + goto err_init_portobj; + } + SWPS_INFO("Inventec switch-port module V.%s initial success.\n", SWP_VERSION); + return 0; + + +err_init_portobj: + clean_ioexp_objs(); +err_init_ioexp: + class_unregister(swp_class_p); + class_destroy(swp_class_p); + unregister_chrdev_region(MKDEV(port_major, 0), port_total); +err_init_out: + SWPS_ERR("Inventec switch-port module V.%s initial failure.\n", SWP_VERSION); + return -1; +} + + +static void __exit +swp_module_exit(void){ + clean_port_obj(); + clean_ioexp_objs(); + class_unregister(swp_class_p); + class_destroy(swp_class_p); + unregister_chrdev_region(MKDEV(port_major, 0), port_total); + SWPS_INFO("Remove Inventec switch-port module success.\n"); +} + + +/* Module information */ +MODULE_AUTHOR(SWP_AUTHOR); +MODULE_DESCRIPTION(SWP_DESC); +MODULE_VERSION(SWP_VERSION); +MODULE_LICENSE(SWP_LICENSE); + +module_init(swp_module_init); +module_exit(swp_module_exit); + + + + + + diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_swps.h b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_swps.h new file mode 100644 index 000000000000..3d462ed3c944 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/inv_swps.h @@ -0,0 +1,184 @@ +#ifndef INV_SWPS_H +#define INV_SWPS_H + +#include "transceiver.h" +#include "io_expander.h" + +/* Module settings */ +#define SWP_CLS_NAME "swps" +#define SWP_DEV_PORT "port" +#define SWP_DEV_MODCTL "module" +#define SWP_RESET_PWD "inventec" +#define SWP_POLLING_PERIOD (300) /* msec */ +#define SWP_POLLING_ENABLE (1) +#define SWP_AUTOCONFIG_ENABLE (1) + +/* Module information */ +#define SWP_AUTHOR "Neil " +#define SWP_DESC "Inventec port and transceiver driver" +#define SWP_VERSION "4.2.5" +#define SWP_LICENSE "GPL" + +/* Module status define */ +#define SWP_STATE_NORMAL (0) +#define SWP_STATE_I2C_DIE (-91) + +/* [Note]: + * Functions and mechanism for auto-detect platform type is ready, + * But HW and BIOS not ready! We need to wait them. + * So, please do not use PLATFORM_TYPE_AUTO until they are ready. + * (2016.06.13) + */ +#define PLATFORM_TYPE_SEQUOIA_GA (171) +/* Current running platfrom */ +#define PLATFORM_SETTINGS PLATFORM_TYPE_SEQUOIA_GA + +/* Define platform flag and kernel version */ +#if (PLATFORM_SETTINGS == PLATFORM_TYPE_SEQUOIA_GA) + #define SWPS_SEQUOIA (1) + #define SWPS_KERN_VER_BF_3_8 (1) +#endif + + +struct inv_platform_s { + int id; + char name[64]; +}; + +struct inv_ioexp_layout_s { + int ioexp_id; + int ioexp_type; + struct ioexp_addr_s addr[4]; +}; + +struct inv_port_layout_s { + int port_id; + int chan_id; + int ioexp_id; + int ioexp_offset; + int transvr_type; + int chipset_type; + int lane_id[8]; +}; + + +/* ========================================== + * Inventec Platform Settings + * ========================================== + */ +struct inv_platform_s platform_map = {PLATFORM_TYPE_SEQUOIA_GA, "Sequoia_GA" }; + +/* ========================================== + * Sequoia Layout configuration + * ========================================== + */ + +struct inv_ioexp_layout_s secquoia_ioexp_layout[] = { + /* IOEXP_ID / IOEXP_TYPE / { Chan_ID, Chip_addr, Read_offset, Write_offset, config_offset, data_default, conf_default } */ + {0, IOEXP_TYPE_SEQUOIA_NABC, { {2, 0x20, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0x00, 0x00}, }, /* addr[0] = I/O Expander 0 A */ + {2, 0x21, {0, 1}, {2, 3}, {6, 7}, {0xff, 0x00}, {0x00, 0xff}, }, /* addr[1] = I/O Expander 0 B */ + {2, 0x22, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0xff, 0xff}, }, }, /* addr[2] = I/O Expander 0 C */ + }, + {1, IOEXP_TYPE_SEQUOIA_NABC, { {3, 0x20, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0x00, 0x00}, }, /* addr[0] = I/O Expander 1 A */ + {3, 0x21, {0, 1}, {2, 3}, {6, 7}, {0xff, 0x00}, {0x00, 0xff}, }, /* addr[1] = I/O Expander 1 B */ + {3, 0x22, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0xff, 0xff}, }, }, /* addr[2] = I/O Expander 1 C */ + }, + {2, IOEXP_TYPE_SEQUOIA_NABC, { {4, 0x20, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0x00, 0x00}, }, /* addr[0] = I/O Expander 2 A */ + {4, 0x21, {0, 1}, {2, 3}, {6, 7}, {0xff, 0x00}, {0x00, 0xff}, }, /* addr[1] = I/O Expander 2 B */ + {4, 0x22, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0xff, 0xff}, }, }, /* addr[2] = I/O Expander 2 C */ + }, + {3, IOEXP_TYPE_SEQUOIA_NABC, { {5, 0x20, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0x00, 0x00}, }, /* addr[0] = I/O Expander 3 A */ + {5, 0x21, {0, 1}, {2, 3}, {6, 7}, {0xff, 0x00}, {0x00, 0xff}, }, /* addr[1] = I/O Expander 3 B */ + {5, 0x22, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0xff, 0xff}, }, }, /* addr[2] = I/O Expander 3 C */ + }, + {4, IOEXP_TYPE_SEQUOIA_NABC, { {6, 0x20, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0x00, 0x00}, }, /* addr[0] = I/O Expander 4 A */ + {6, 0x21, {0, 1}, {2, 3}, {6, 7}, {0xff, 0x00}, {0x00, 0xff}, }, /* addr[1] = I/O Expander 4 B */ + {6, 0x22, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0xff, 0xff}, }, }, /* addr[2] = I/O Expander 4 C */ + }, + {5, IOEXP_TYPE_SEQUOIA_NABC, { {7, 0x20, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0x00, 0x00}, }, /* addr[0] = I/O Expander 5 A */ + {7, 0x21, {0, 1}, {2, 3}, {6, 7}, {0xff, 0x00}, {0x00, 0xff}, }, /* addr[1] = I/O Expander 5 B */ + {7, 0x22, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0xff, 0xff}, }, }, /* addr[2] = I/O Expander 5 C */ + }, + {6, IOEXP_TYPE_SEQUOIA_NABC, { {8, 0x20, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0x00, 0x00}, }, /* addr[0] = I/O Expander 6 A */ + {8, 0x21, {0, 1}, {2, 3}, {6, 7}, {0xff, 0x00}, {0x00, 0xff}, }, /* addr[1] = I/O Expander 6 B */ + {8, 0x22, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0xff, 0xff}, }, }, /* addr[2] = I/O Expander 6 C */ + }, + {7, IOEXP_TYPE_SEQUOIA_NABC, { {9, 0x20, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0x00, 0x00}, }, /* addr[0] = I/O Expander 7 A */ + {9, 0x21, {0, 1}, {2, 3}, {6, 7}, {0xff, 0x00}, {0x00, 0xff}, }, /* addr[1] = I/O Expander 7 B */ + {9, 0x22, {0, 1}, {2, 3}, {6, 7}, {0x00, 0xff}, {0xff, 0xff}, }, }, /* addr[2] = I/O Expander 7 C */ + }, +}; + + +struct inv_port_layout_s secquoia_port_layout[] = { + /* Port_ID / Chan_ID / IOEXP_ID / IOEXP_VIRT_OFFSET / TRANSCEIVER_TYPE / BCM_CHIP_TYPE / LANE_ID */ + { 0, 10, 0, 0, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 9, 10, 11, 12} }, + { 1, 11, 0, 1, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 1, 2, 3, 4} }, + { 2, 12, 0, 2, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 25, 26, 27, 28} }, + { 3, 13, 0, 3, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 17, 18, 19, 20} }, + { 4, 14, 0, 4, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 41, 42, 43, 44} }, + { 5, 15, 0, 5, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 33, 34, 35, 36} }, + { 6, 16, 0, 6, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 57, 58, 59, 60} }, + { 7, 17, 0, 7, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 49, 50, 51, 52} }, + { 8, 18, 1, 0, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 73, 74, 75, 76} }, + { 9, 19, 1, 1, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 65, 66, 67, 68} }, + {10, 20, 1, 2, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 89, 90, 91, 92} }, + {11, 21, 1, 3, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 81, 82, 83, 84} }, + {12, 22, 1, 4, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {105, 106, 107, 108} }, + {13, 23, 1, 5, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 97, 98, 99, 100} }, + {14, 24, 1, 6, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {121, 122, 123, 124} }, + {15, 25, 1, 7, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {113, 114, 115, 116} }, + {16, 26, 2, 0, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {137, 138, 139, 140} }, + {17, 27, 2, 1, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {129, 130, 131, 132} }, + {18, 28, 2, 2, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {153, 154, 155, 156} }, + {19, 29, 2, 3, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {145, 146, 147, 148} }, + {20, 30, 2, 4, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {169, 170, 171, 172} }, + {21, 31, 2, 5, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {161, 162, 163, 164} }, + {22, 32, 2, 6, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {185, 186, 187, 188} }, + {23, 33, 2, 7, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {177, 178, 179, 180} }, + {24, 34, 3, 0, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {201, 202, 203, 204} }, + {25, 35, 3, 1, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {193, 194, 195, 196} }, + {26, 36, 3, 2, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {217, 218, 219, 220} }, + {27, 37, 3, 3, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {209, 210, 211, 212} }, + {28, 38, 3, 4, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {233, 234, 235, 236} }, + {29, 39, 3, 5, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {225, 226, 227, 228} }, + {30, 40, 3, 6, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {249, 250, 251, 252} }, + {31, 41, 3, 7, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {241, 242, 243, 244} }, + {32, 45, 4, 3, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 13, 14, 15, 16} }, + {33, 44, 4, 2, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 5, 6, 7, 8} }, + {34, 43, 4, 1, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 29, 30, 31, 32} }, + {35, 42, 4, 0, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 21, 22, 23, 24} }, + {36, 49, 4, 7, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 45, 46, 47, 48} }, + {37, 48, 4, 6, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 37, 38, 39, 40} }, + {38, 47, 4, 5, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 61, 62, 63, 64} }, + {39, 46, 4, 4, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 53, 54, 55, 56} }, + {40, 53, 5, 3, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 77, 78, 79, 80} }, + {41, 52, 5, 2, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 69, 70, 71, 72} }, + {42, 51, 5, 1, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 93, 94, 95, 96} }, + {43, 50, 5, 0, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, { 85, 86, 87, 88} }, + {44, 57, 5, 7, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {109, 110, 111, 112} }, + {45, 56, 5, 6, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {101, 102, 103, 104} }, + {46, 55, 5, 5, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {125, 126, 127, 128} }, + {47, 54, 5, 4, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {117, 118, 119, 120} }, + {48, 61, 6, 3, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {141, 142, 143, 144} }, + {49, 60, 6, 2, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {133, 134, 135, 136} }, + {50, 59, 6, 1, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {157, 158, 159, 160} }, + {51, 58, 6, 0, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {149, 150, 151, 152} }, + {52, 65, 6, 7, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {173, 174, 175, 176} }, + {53, 64, 6, 6, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {165, 166, 167, 168} }, + {54, 63, 6, 5, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {189, 190, 191, 192} }, + {55, 62, 6, 4, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {181, 182, 183, 184} }, + {56, 69, 7, 3, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {205, 206, 207, 208} }, + {57, 68, 7, 2, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {197, 198, 199, 200} }, + {58, 67, 7, 1, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {221, 222, 223, 224} }, + {59, 66, 7, 0, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {213, 214, 215, 216} }, + {60, 73, 7, 7, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {237, 238, 239, 240} }, + {61, 72, 7, 6, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {229, 230, 231, 232} }, + {62, 71, 7, 5, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {253, 254, 255, 256} }, + {63, 70, 7, 4, TRANSVR_TYPE_QSFP_28, BCM_CHIP_TYPE_TOMAHAWK, {245, 246, 247, 248} }, +}; + + +#endif /* INV_SWPS_H */ + + diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/io_expander.c b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/io_expander.c new file mode 100644 index 000000000000..231884f3e442 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/io_expander.c @@ -0,0 +1,1786 @@ +#include +#include +#include "io_expander.h" + +static struct ioexp_obj_s *ioexp_head_p = NULL; +static struct ioexp_obj_s *ioexp_tail_p = NULL; + + +/* ========== Register IOEXP layout ========== + */ +struct ioexp_map_s ioexp_map_magnolia_nab = { + + .chip_amount = 2, + .data_width = 2, + + .map_present = { {0, 0, 4}, /* map_present[0] = MOD_ABS_PORT(X) */ + {0, 0, 5}, /* map_present[1] = MOD_ABS_PORT(X+1) */ + {0, 0, 6}, /* map_present[2] = MOD_ABS_PORT(X+2) */ + {0, 0, 7}, /* map_present[3] = MOD_ABS_PORT(X+3) */ + {1, 0, 4}, /* map_present[4] = MOD_ABS_PORT(X+4) */ + {1, 0, 5}, /* map_present[5] = MOD_ABS_PORT(X+5) */ + {1, 0, 6}, /* map_present[6] = MOD_ABS_PORT(X+6) */ + {1, 0, 7}, /* map_present[7] = MOD_ABS_PORT(X+7) */ + }, + .map_tx_disable = { {0, 1, 0}, /* map_tx_disable[0] = TXDISABLE_SFP+_P(X) */ + {0, 1, 1}, /* map_tx_disable[1] = TXDISABLE_SFP+_P(X+1) */ + {0, 1, 2}, /* map_tx_disable[2] = TXDISABLE_SFP+_P(X+2) */ + {0, 1, 3}, /* map_tx_disable[3] = TXDISABLE_SFP+_P(X+3) */ + {1, 1, 0}, /* map_tx_disable[4] = TXDISABLE_SFP+_P(X+4) */ + {1, 1, 1}, /* map_tx_disable[5] = TXDISABLE_SFP+_P(X+5) */ + {1, 1, 2}, /* map_tx_disable[6] = TXDISABLE_SFP+_P(X+6) */ + {1, 1, 3}, /* map_tx_disable[7] = TXDISABLE_SFP+_P(X+7) */ + }, + .map_tx_fault = { {0, 0, 0}, /* map_tx_fault[0] = TXFAULT_SFP+_P(X) */ + {0, 0, 1}, /* map_tx_fault[1] = TXFAULT_SFP+_P(X+1) */ + {0, 0, 2}, /* map_tx_fault[2] = TXFAULT_SFP+_P(X+2) */ + {0, 0, 3}, /* map_tx_fault[3] = TXFAULT_SFP+_P(X+3) */ + {1, 0, 0}, /* map_tx_fault[4] = TXFAULT_SFP+_P(X+4) */ + {1, 0, 1}, /* map_tx_fault[5] = TXFAULT_SFP+_P(X+5) */ + {1, 0, 2}, /* map_tx_fault[6] = TXFAULT_SFP+_P(X+6) */ + {1, 0, 3}, /* map_tx_fault[7] = TXFAULT_SFP+_P(X+7) */ + }, + .map_rxlos = { {0, 1, 4}, /* map_rxlos[0] = OPRXLOS_PORT(X) */ + {0, 1, 5}, /* map_rxlos[1] = OPRXLOS_PORT(X+1) */ + {0, 1, 6}, /* map_rxlos[2] = OPRXLOS_PORT(X+2) */ + {0, 1, 7}, /* map_rxlos[3] = OPRXLOS_PORT(X+3) */ + {1, 1, 4}, /* map_rxlos[4] = OPRXLOS_PORT(X+4) */ + {1, 1, 5}, /* map_rxlos[5] = OPRXLOS_PORT(X+5) */ + {1, 1, 6}, /* map_rxlos[6] = OPRXLOS_PORT(X+6) */ + {1, 1, 7}, /* map_rxlos[7] = OPRXLOS_PORT(X+7) */ + }, +}; + + +struct ioexp_map_s ioexp_map_magnolia_7ab = { + + .chip_amount = 2, + .data_width = 2, + + .map_present = { {1, 0, 4}, /* map_present[0] = MOD_ABS_PORT(X) */ + {1, 0, 5}, /* map_present[1] = MOD_ABS_PORT(X+1) */ + {1, 0, 6}, /* map_present[2] = MOD_ABS_PORT(X+2) */ + {1, 0, 7}, /* map_present[3] = MOD_ABS_PORT(X+3) */ + {1, 1, 4}, /* map_present[4] = MOD_ABS_PORT(X+4) */ + {1, 1, 5}, /* map_present[5] = MOD_ABS_PORT(X+5) */ + }, + .map_reset = { {0, 0, 0}, /* map_reset[0] = QRESET_QSFP_N_P(X) */ + {0, 0, 1}, /* map_reset[1] = QRESET_QSFP_N_P(X+1) */ + {0, 0, 2}, /* map_reset[2] = QRESET_QSFP_N_P(X+2) */ + {0, 0, 3}, /* map_reset[3] = QRESET_QSFP_N_P(X+3) */ + {1, 0, 0}, /* map_reset[4] = QRESET_QSFP_N_P(X+4) */ + {1, 0, 1}, /* map_reset[5] = QRESET_QSFP_N_P(X+5) */ + }, + .map_lpmod = { {0, 0, 4}, /* map_lpmod[0] = LPMODE_QSFP_P(X) */ + {0, 0, 5}, /* map_lpmod[1] = LPMODE_QSFP_P(X+1) */ + {0, 0, 6}, /* map_lpmod[2] = LPMODE_QSFP_P(X+2) */ + {0, 0, 7}, /* map_lpmod[3] = LPMODE_QSFP_P(X+3) */ + {1, 0, 2}, /* map_lpmod[4] = LPMODE_QSFP_P(X+4) */ + {1, 0, 3}, /* map_lpmod[5] = LPMODE_QSFP_P(X+5) */ + }, + .map_modsel = { {0, 1, 4}, /* map_modsel[0] = MODSEL_QSFP_N_P(X) */ + {0, 1, 5}, /* map_modsel[1] = MODSEL_QSFP_N_P(X+1) */ + {0, 1, 6}, /* map_modsel[2] = MODSEL_QSFP_N_P(X+2) */ + {0, 1, 7}, /* map_modsel[3] = MODSEL_QSFP_N_P(X+3) */ + {1, 1, 4}, /* map_modsel[4] = MODSEL_QSFP_N_P(X+4) */ + {1, 1, 5}, /* map_modsel[5] = MODSEL_QSFP_N_P(X+5) */ + }, +}; + + +struct ioexp_map_s ioexp_map_redwood_p01p08_p17p24 = { + + .chip_amount = 3, + .data_width = 2, + + .map_present = { {2, 0, 0}, /* map_present[0] = MOD_ABS_PORT(X) */ + {2, 0, 1}, /* map_present[1] = MOD_ABS_PORT(X+1) */ + {2, 0, 2}, /* map_present[2] = MOD_ABS_PORT(X+2) */ + {2, 0, 3}, /* map_present[3] = MOD_ABS_PORT(X+3) */ + {2, 0, 4}, /* map_present[4] = MOD_ABS_PORT(X+4) */ + {2, 0, 5}, /* map_present[5] = MOD_ABS_PORT(X+5) */ + {2, 0, 6}, /* map_present[6] = MOD_ABS_PORT(X+6) */ + {2, 0, 7}, /* map_present[7] = MOD_ABS_PORT(X+7) */ + }, + .map_reset = { {0, 0, 0}, /* map_reset[0] = QRESET_QSFP28_N_P(X) */ + {0, 0, 1}, /* map_reset[1] = QRESET_QSFP28_N_P(X+1) */ + {0, 0, 2}, /* map_reset[2] = QRESET_QSFP28_N_P(X+2) */ + {0, 0, 3}, /* map_reset[3] = QRESET_QSFP28_N_P(X+3) */ + {1, 0, 0}, /* map_reset[4] = QRESET_QSFP28_N_P(X+4) */ + {1, 0, 1}, /* map_reset[5] = QRESET_QSFP28_N_P(X+5) */ + {1, 0, 2}, /* map_reset[6] = QRESET_QSFP28_N_P(X+6) */ + {1, 0, 3}, /* map_reset[7] = QRESET_QSFP28_N_P(X+7) */ + }, + .map_lpmod = { {0, 0, 4}, /* map_lpmod[0] = LPMODE_QSFP28_P(X) */ + {0, 0, 5}, /* map_lpmod[1] = LPMODE_QSFP28_P(X+1) */ + {0, 0, 6}, /* map_lpmod[2] = LPMODE_QSFP28_P(X+2) */ + {0, 0, 7}, /* map_lpmod[3] = LPMODE_QSFP28_P(X+3) */ + {1, 0, 4}, /* map_lpmod[4] = LPMODE_QSFP28_P(X+4) */ + {1, 0, 5}, /* map_lpmod[5] = LPMODE_QSFP28_P(X+5) */ + {1, 0, 6}, /* map_lpmod[6] = LPMODE_QSFP28_P(X+6) */ + {1, 0, 7}, /* map_lpmod[7] = LPMODE_QSFP28_P(X+7) */ + }, + .map_modsel = { {0, 1, 4}, /* map_modsel[0] = MODSEL_QSFP28_N_P(X) */ + {0, 1, 5}, /* map_modsel[1] = MODSEL_QSFP28_N_P(X+1) */ + {0, 1, 6}, /* map_modsel[2] = MODSEL_QSFP28_N_P(X+2) */ + {0, 1, 7}, /* map_modsel[3] = MODSEL_QSFP28_N_P(X+3) */ + {1, 1, 4}, /* map_modsel[4] = MODSEL_QSFP28_N_P(X+4) */ + {1, 1, 5}, /* map_modsel[5] = MODSEL_QSFP28_N_P(X+5) */ + {1, 1, 6}, /* map_modsel[6] = MODSEL_QSFP28_N_P(X+6) */ + {1, 1, 7}, /* map_modsel[7] = MODSEL_QSFP28_N_P(X+7) */ + }, +}; + + +struct ioexp_map_s ioexp_map_redwood_p09p16_p25p32 = { + + .chip_amount = 3, + .data_width = 2, + + .map_present = { {2, 1, 0}, /* map_present[0] = MOD_ABS_PORT(X) */ + {2, 1, 1}, /* map_present[1] = MOD_ABS_PORT(X+1) */ + {2, 1, 2}, /* map_present[2] = MOD_ABS_PORT(X+2) */ + {2, 1, 3}, /* map_present[3] = MOD_ABS_PORT(X+3) */ + {2, 1, 4}, /* map_present[4] = MOD_ABS_PORT(X+4) */ + {2, 1, 5}, /* map_present[5] = MOD_ABS_PORT(X+5) */ + {2, 1, 6}, /* map_present[6] = MOD_ABS_PORT(X+6) */ + {2, 1, 7}, /* map_present[7] = MOD_ABS_PORT(X+7) */ + }, + .map_reset = { {0, 0, 0}, /* map_reset[0] = QRESET_QSFP28_N_P(X) */ + {0, 0, 1}, /* map_reset[1] = QRESET_QSFP28_N_P(X+1) */ + {0, 0, 2}, /* map_reset[2] = QRESET_QSFP28_N_P(X+2) */ + {0, 0, 3}, /* map_reset[3] = QRESET_QSFP28_N_P(X+3) */ + {1, 0, 0}, /* map_reset[4] = QRESET_QSFP28_N_P(X+4) */ + {1, 0, 1}, /* map_reset[5] = QRESET_QSFP28_N_P(X+5) */ + {1, 0, 2}, /* map_reset[6] = QRESET_QSFP28_N_P(X+6) */ + {1, 0, 3}, /* map_reset[7] = QRESET_QSFP28_N_P(X+7) */ + }, + .map_lpmod = { {0, 0, 4}, /* map_lpmod[0] = LPMODE_QSFP28_P(X) */ + {0, 0, 5}, /* map_lpmod[1] = LPMODE_QSFP28_P(X+1) */ + {0, 0, 6}, /* map_lpmod[2] = LPMODE_QSFP28_P(X+2) */ + {0, 0, 7}, /* map_lpmod[3] = LPMODE_QSFP28_P(X+3) */ + {1, 0, 4}, /* map_lpmod[4] = LPMODE_QSFP28_P(X+4) */ + {1, 0, 5}, /* map_lpmod[5] = LPMODE_QSFP28_P(X+5) */ + {1, 0, 6}, /* map_lpmod[6] = LPMODE_QSFP28_P(X+6) */ + {1, 0, 7}, /* map_lpmod[7] = LPMODE_QSFP28_P(X+7) */ + }, + .map_modsel = { {0, 1, 4}, /* map_modsel[0] = MODSEL_QSFP28_N_P(X) */ + {0, 1, 5}, /* map_modsel[1] = MODSEL_QSFP28_N_P(X+1) */ + {0, 1, 6}, /* map_modsel[2] = MODSEL_QSFP28_N_P(X+2) */ + {0, 1, 7}, /* map_modsel[3] = MODSEL_QSFP28_N_P(X+3) */ + {1, 1, 4}, /* map_modsel[4] = MODSEL_QSFP28_N_P(X+4) */ + {1, 1, 5}, /* map_modsel[5] = MODSEL_QSFP28_N_P(X+5) */ + {1, 1, 6}, /* map_modsel[6] = MODSEL_QSFP28_N_P(X+6) */ + {1, 1, 7}, /* map_modsel[7] = MODSEL_QSFP28_N_P(X+7) */ + }, +}; + + +struct ioexp_map_s ioexp_map_hudson32iga_p01p08_p17p24 = { + + .chip_amount = 3, + .data_width = 2, + + .map_present = { {2, 0, 0}, /* map_present[0] = MODABS_QSFP(X) */ + {2, 0, 1}, /* map_present[1] = MODABS_QSFP(X+1) */ + {2, 0, 2}, /* map_present[2] = MODABS_QSFP(X+2) */ + {2, 0, 3}, /* map_present[3] = MODABS_QSFP(X+3) */ + {2, 0, 4}, /* map_present[4] = MODABS_QSFP(X+4) */ + {2, 0, 5}, /* map_present[5] = MODABS_QSFP(X+5) */ + {2, 0, 6}, /* map_present[6] = MODABS_QSFP(X+6) */ + {2, 0, 7}, /* map_present[7] = MODABS_QSFP(X+7) */ + }, + .map_reset = { {0, 0, 0}, /* map_reset[0] = QRESET_QSFP(X) */ + {0, 0, 1}, /* map_reset[1] = QRESET_QSFP(X+1) */ + {0, 0, 2}, /* map_reset[2] = QRESET_QSFP(X+2) */ + {0, 0, 3}, /* map_reset[3] = QRESET_QSFP(X+3) */ + {1, 0, 0}, /* map_reset[4] = QRESET_QSFP(X+4) */ + {1, 0, 1}, /* map_reset[5] = QRESET_QSFP(X+5) */ + {1, 0, 2}, /* map_reset[6] = QRESET_QSFP(X+6) */ + {1, 0, 3}, /* map_reset[7] = QRESET_QSFP(X+7) */ + }, + .map_lpmod = { {0, 0, 4}, /* map_lpmod[0] = LPMODE_QSFP(X) */ + {0, 0, 5}, /* map_lpmod[1] = LPMODE_QSFP(X+1) */ + {0, 0, 6}, /* map_lpmod[2] = LPMODE_QSFP(X+2) */ + {0, 0, 7}, /* map_lpmod[3] = LPMODE_QSFP(X+3) */ + {1, 0, 4}, /* map_lpmod[4] = LPMODE_QSFP(X+4) */ + {1, 0, 5}, /* map_lpmod[5] = LPMODE_QSFP(X+5) */ + {1, 0, 6}, /* map_lpmod[6] = LPMODE_QSFP(X+6) */ + {1, 0, 7}, /* map_lpmod[7] = LPMODE_QSFP(X+7) */ + }, + .map_modsel = { {0, 1, 4}, /* map_modsel[0] = MODSEL_QSFP(X) */ + {0, 1, 5}, /* map_modsel[1] = MODSEL_QSFP(X+1) */ + {0, 1, 6}, /* map_modsel[2] = MODSEL_QSFP(X+2) */ + {0, 1, 7}, /* map_modsel[3] = MODSEL_QSFP(X+3) */ + {1, 1, 4}, /* map_modsel[4] = MODSEL_QSFP(X+4) */ + {1, 1, 5}, /* map_modsel[5] = MODSEL_QSFP(X+5) */ + {1, 1, 6}, /* map_modsel[6] = MODSEL_QSFP(X+6) */ + {1, 1, 7}, /* map_modsel[7] = MODSEL_QSFP(X+7) */ + }, +}; + + +struct ioexp_map_s ioexp_map_hudson32iga_p09p16_p25p32 = { + + .chip_amount = 3, + .data_width = 2, + + .map_present = { {2, 1, 0}, /* map_present[0] = MODABS_QSFP(X) */ + {2, 1, 1}, /* map_present[1] = MODABS_QSFP(X+1) */ + {2, 1, 2}, /* map_present[2] = MODABS_QSFP(X+2) */ + {2, 1, 3}, /* map_present[3] = MODABS_QSFP(X+3) */ + {2, 1, 4}, /* map_present[4] = MODABS_QSFP(X+4) */ + {2, 1, 5}, /* map_present[5] = MODABS_QSFP(X+5) */ + {2, 1, 6}, /* map_present[6] = MODABS_QSFP(X+6) */ + {2, 1, 7}, /* map_present[7] = MODABS_QSFP(X+7) */ + }, + .map_reset = { {0, 0, 0}, /* map_reset[0] = QRESET_QSFP(X) */ + {0, 0, 1}, /* map_reset[1] = QRESET_QSFP(X+1) */ + {0, 0, 2}, /* map_reset[2] = QRESET_QSFP(X+2) */ + {0, 0, 3}, /* map_reset[3] = QRESET_QSFP(X+3) */ + {1, 0, 0}, /* map_reset[4] = QRESET_QSFP(X+4) */ + {1, 0, 1}, /* map_reset[5] = QRESET_QSFP(X+5) */ + {1, 0, 2}, /* map_reset[6] = QRESET_QSFP(X+6) */ + {1, 0, 3}, /* map_reset[7] = QRESET_QSFP(X+7) */ + }, + .map_lpmod = { {0, 0, 4}, /* map_lpmod[0] = LPMODE_QSFP(X) */ + {0, 0, 5}, /* map_lpmod[1] = LPMODE_QSFP(X+1) */ + {0, 0, 6}, /* map_lpmod[2] = LPMODE_QSFP(X+2) */ + {0, 0, 7}, /* map_lpmod[3] = LPMODE_QSFP(X+3) */ + {1, 0, 4}, /* map_lpmod[4] = LPMODE_QSFP(X+4) */ + {1, 0, 5}, /* map_lpmod[5] = LPMODE_QSFP(X+5) */ + {1, 0, 6}, /* map_lpmod[6] = LPMODE_QSFP(X+6) */ + {1, 0, 7}, /* map_lpmod[7] = LPMODE_QSFP(X+7) */ + }, + .map_modsel = { {0, 1, 4}, /* map_modsel[0] = MODSEL_QSFP(X) */ + {0, 1, 5}, /* map_modsel[1] = MODSEL_QSFP(X+1) */ + {0, 1, 6}, /* map_modsel[2] = MODSEL_QSFP(X+2) */ + {0, 1, 7}, /* map_modsel[3] = MODSEL_QSFP(X+3) */ + {1, 1, 4}, /* map_modsel[4] = MODSEL_QSFP(X+4) */ + {1, 1, 5}, /* map_modsel[5] = MODSEL_QSFP(X+5) */ + {1, 1, 6}, /* map_modsel[6] = MODSEL_QSFP(X+6) */ + {1, 1, 7}, /* map_modsel[7] = MODSEL_QSFP(X+7) */ + }, +}; + + +struct ioexp_map_s ioexp_map_cypress_nabc = { + + .chip_amount = 3, + .data_width = 2, + + .map_present = { {0, 0, 4}, /* map_present[0] = MOD_ABS_PORT(X) */ + {0, 0, 5}, /* map_present[1] = MOD_ABS_PORT(X+1) */ + {0, 0, 6}, /* map_present[2] = MOD_ABS_PORT(X+2) */ + {0, 0, 7}, /* map_present[3] = MOD_ABS_PORT(X+3) */ + {1, 0, 4}, /* map_present[4] = MOD_ABS_PORT(X+4) */ + {1, 0, 5}, /* map_present[5] = MOD_ABS_PORT(X+5) */ + {1, 0, 6}, /* map_present[6] = MOD_ABS_PORT(X+6) */ + {1, 0, 7}, /* map_present[7] = MOD_ABS_PORT(X+7) */ + }, + .map_tx_disable = { {0, 1, 0}, /* map_tx_disable[0] = TXDISABLE_SFP+_P(X) */ + {0, 1, 1}, /* map_tx_disable[1] = TXDISABLE_SFP+_P(X+1) */ + {0, 1, 2}, /* map_tx_disable[2] = TXDISABLE_SFP+_P(X+2) */ + {0, 1, 3}, /* map_tx_disable[3] = TXDISABLE_SFP+_P(X+3) */ + {1, 1, 0}, /* map_tx_disable[4] = TXDISABLE_SFP+_P(X+4) */ + {1, 1, 1}, /* map_tx_disable[5] = TXDISABLE_SFP+_P(X+5) */ + {1, 1, 2}, /* map_tx_disable[6] = TXDISABLE_SFP+_P(X+6) */ + {1, 1, 3}, /* map_tx_disable[7] = TXDISABLE_SFP+_P(X+7) */ + }, + .map_tx_fault = { {0, 0, 0}, /* map_tx_fault[0] = TXFAULT_SFP+_P(X) */ + {0, 0, 1}, /* map_tx_fault[1] = TXFAULT_SFP+_P(X+1) */ + {0, 0, 2}, /* map_tx_fault[2] = TXFAULT_SFP+_P(X+2) */ + {0, 0, 3}, /* map_tx_fault[3] = TXFAULT_SFP+_P(X+3) */ + {1, 0, 0}, /* map_tx_fault[4] = TXFAULT_SFP+_P(X+4) */ + {1, 0, 1}, /* map_tx_fault[5] = TXFAULT_SFP+_P(X+5) */ + {1, 0, 2}, /* map_tx_fault[6] = TXFAULT_SFP+_P(X+6) */ + {1, 0, 3}, /* map_tx_fault[7] = TXFAULT_SFP+_P(X+7) */ + }, + .map_rxlos = { {0, 1, 4}, /* map_rxlos[0] = OPRXLOS_PORT(X) */ + {0, 1, 5}, /* map_rxlos[1] = OPRXLOS_PORT(X+1) */ + {0, 1, 6}, /* map_rxlos[2] = OPRXLOS_PORT(X+2) */ + {0, 1, 7}, /* map_rxlos[3] = OPRXLOS_PORT(X+3) */ + {1, 1, 4}, /* map_rxlos[4] = OPRXLOS_PORT(X+4) */ + {1, 1, 5}, /* map_rxlos[5] = OPRXLOS_PORT(X+5) */ + {1, 1, 6}, /* map_rxlos[6] = OPRXLOS_PORT(X+6) */ + {1, 1, 7}, /* map_rxlos[7] = OPRXLOS_PORT(X+7) */ + }, + .map_hard_rs0 = { {2, 0, 0}, /* map_hard_rs0[0] = RS0_SFP28_P(X) */ + {2, 0, 2}, /* map_hard_rs0[1] = RS0_SFP28_P(X+1) */ + {2, 0, 4}, /* map_hard_rs0[2] = RS0_SFP28_P(X+2) */ + {2, 0, 6}, /* map_hard_rs0[3] = RS0_SFP28_P(X+3) */ + {2, 1, 0}, /* map_hard_rs0[4] = RS0_SFP28_P(X+4) */ + {2, 1, 2}, /* map_hard_rs0[5] = RS0_SFP28_P(X+5) */ + {2, 1, 4}, /* map_hard_rs0[6] = RS0_SFP28_P(X+6) */ + {2, 1, 6}, /* map_hard_rs0[7] = RS0_SFP28_P(X+7) */ + }, + .map_hard_rs1 = { {2, 0, 1}, /* map_hard_rs1[0] = RS1_SFP28_P(X) */ + {2, 0, 3}, /* map_hard_rs1[1] = RS1_SFP28_P(X+1) */ + {2, 0, 5}, /* map_hard_rs1[2] = RS1_SFP28_P(X+2) */ + {2, 0, 7}, /* map_hard_rs1[3] = RS1_SFP28_P(X+3) */ + {2, 1, 1}, /* map_hard_rs1[4] = RS1_SFP28_P(X+4) */ + {2, 1, 3}, /* map_hard_rs1[5] = RS1_SFP28_P(X+5) */ + {2, 1, 5}, /* map_hard_rs1[6] = RS1_SFP28_P(X+6) */ + {2, 1, 7}, /* map_hard_rs1[7] = RS1_SFP28_P(X+7) */ + }, +}; + + +struct ioexp_map_s ioexp_map_cypress_7abc = { + + .chip_amount = 3, + .data_width = 2, + + .map_present = { {2, 0, 0}, /* map_present[0] = MOD_ABS_PORT(X) */ + {2, 0, 1}, /* map_present[1] = MOD_ABS_PORT(X+1) */ + {2, 0, 2}, /* map_present[2] = MOD_ABS_PORT(X+2) */ + {2, 0, 3}, /* map_present[3] = MOD_ABS_PORT(X+3) */ + {2, 0, 4}, /* map_present[4] = MOD_ABS_PORT(X+4) */ + {2, 0, 5}, /* map_present[5] = MOD_ABS_PORT(X+5) */ + }, + .map_reset = { {0, 0, 0}, /* map_reset[0] = QRESET_QSFP_N_P(X) */ + {0, 0, 1}, /* map_reset[1] = QRESET_QSFP_N_P(X+1) */ + {0, 0, 2}, /* map_reset[2] = QRESET_QSFP_N_P(X+2) */ + {0, 0, 3}, /* map_reset[3] = QRESET_QSFP_N_P(X+3) */ + {0, 0, 4}, /* map_reset[4] = QRESET_QSFP_N_P(X+4) */ + {0, 0, 5}, /* map_reset[5] = QRESET_QSFP_N_P(X+5) */ + }, + .map_lpmod = { {0, 1, 0}, /* map_lpmod[0] = LPMODE_QSFP_P(X) */ + {0, 1, 1}, /* map_lpmod[1] = LPMODE_QSFP_P(X+1) */ + {0, 1, 2}, /* map_lpmod[2] = LPMODE_QSFP_P(X+2) */ + {0, 1, 3}, /* map_lpmod[3] = LPMODE_QSFP_P(X+3) */ + {0, 1, 4}, /* map_lpmod[4] = LPMODE_QSFP_P(X+4) */ + {0, 1, 5}, /* map_lpmod[5] = LPMODE_QSFP_P(X+5) */ + }, + .map_modsel = { {1, 1, 0}, /* map_modsel[0] = MODSEL_QSFP_N_P(X) */ + {1, 1, 1}, /* map_modsel[1] = MODSEL_QSFP_N_P(X+1) */ + {1, 1, 2}, /* map_modsel[2] = MODSEL_QSFP_N_P(X+2) */ + {1, 1, 3}, /* map_modsel[3] = MODSEL_QSFP_N_P(X+3) */ + {1, 1, 4}, /* map_modsel[4] = MODSEL_QSFP_N_P(X+4) */ + {1, 1, 5}, /* map_modsel[5] = MODSEL_QSFP_N_P(X+5) */ + }, +}; + + +struct ioexp_map_s ioexp_map_tahoe_5a = { + + .chip_amount = 1, + .data_width = 2, + + .map_present = { {0, 0, 3}, /* map_present[0] = MOD_ABS_PORT(X) */ + {0, 1, 0}, /* map_present[1] = MOD_ABS_PORT(X+1) */ + {0, 1, 5}, /* map_present[2] = MOD_ABS_PORT(X+2) */ + }, + .map_reset = { {0, 0, 1}, /* map_reset[0] = QRESET_QSFP_N_P(X) */ + {0, 0, 6}, /* map_reset[1] = QRESET_QSFP_N_P(X+1) */ + {0, 1, 3}, /* map_reset[2] = QRESET_QSFP_N_P(X+2) */ + }, + .map_lpmod = { {0, 0, 2}, /* map_lpmod[0] = LPMODE_QSFP_P(X) */ + {0, 0, 7}, /* map_lpmod[1] = LPMODE_QSFP_P(X+1) */ + {0, 1, 4}, /* map_lpmod[2] = LPMODE_QSFP_P(X+2) */ + }, + .map_modsel = { {0, 0, 0}, /* map_modsel[0] = MODSEL_QSFP_N_P(X) */ + {0, 0, 5}, /* map_modsel[1] = MODSEL_QSFP_N_P(X+1) */ + {0, 1, 2}, /* map_modsel[2] = MODSEL_QSFP_N_P(X+2) */ + }, +}; + + +struct ioexp_map_s ioexp_map_tahoe_6abc = { + + .chip_amount = 3, + .data_width = 2, + + .map_present = { {0, 0, 3}, /* map_present[0] = MOD_ABS_PORT(X) */ + {0, 1, 0}, /* map_present[1] = MOD_ABS_PORT(X+1) */ + {0, 1, 5}, /* map_present[2] = MOD_ABS_PORT(X+2) */ + {1, 0, 3}, /* map_present[3] = MOD_ABS_PORT(X+3) */ + {1, 1, 0}, /* map_present[4] = MOD_ABS_PORT(X+4) */ + {1, 1, 5}, /* map_present[5] = MOD_ABS_PORT(X+5) */ + {2, 0, 3}, /* map_present[6] = MOD_ABS_PORT(X+6) */ + {2, 1, 0}, /* map_present[7] = MOD_ABS_PORT(X+7) */ + {2, 1, 5}, /* map_present[8] = MOD_ABS_PORT(X+8) */ + }, + .map_reset = { {0, 0, 1}, /* map_reset[0] = QRESET_QSFP28_N_P(X) */ + {0, 0, 6}, /* map_reset[1] = QRESET_QSFP28_N_P(X+1) */ + {0, 1, 3}, /* map_reset[2] = QRESET_QSFP28_N_P(X+2) */ + {1, 0, 1}, /* map_reset[3] = QRESET_QSFP28_N_P(X+3) */ + {1, 0, 6}, /* map_reset[4] = QRESET_QSFP28_N_P(X+4) */ + {1, 1, 3}, /* map_reset[5] = QRESET_QSFP28_N_P(X+5) */ + {2, 0, 1}, /* map_reset[6] = QRESET_QSFP28_N_P(X+6) */ + {2, 0, 6}, /* map_reset[7] = QRESET_QSFP28_N_P(X+7) */ + {2, 1, 3}, /* map_reset[7] = QRESET_QSFP28_N_P(X+7) */ + }, + .map_lpmod = { {0, 0, 2}, /* map_lpmod[0] = LPMODE_QSFP28_P(X) */ + {0, 0, 7}, /* map_lpmod[1] = LPMODE_QSFP28_P(X+1) */ + {0, 1, 4}, /* map_lpmod[2] = LPMODE_QSFP28_P(X+2) */ + {1, 0, 2}, /* map_lpmod[3] = LPMODE_QSFP28_P(X+3) */ + {1, 0, 7}, /* map_lpmod[4] = LPMODE_QSFP28_P(X+4) */ + {1, 1, 4}, /* map_lpmod[5] = LPMODE_QSFP28_P(X+5) */ + {2, 0, 2}, /* map_lpmod[6] = LPMODE_QSFP28_P(X+6) */ + {2, 0, 7}, /* map_lpmod[7] = LPMODE_QSFP28_P(X+7) */ + {2, 1, 4}, /* map_lpmod[7] = LPMODE_QSFP28_P(X+8) */ + }, + .map_modsel = { {0, 0, 0}, /* map_modsel[0] = MODSEL_QSFP28_N_P(X) */ + {0, 0, 5}, /* map_modsel[1] = MODSEL_QSFP28_N_P(X+1) */ + {0, 1, 2}, /* map_modsel[2] = MODSEL_QSFP28_N_P(X+2) */ + {1, 0, 0}, /* map_modsel[3] = MODSEL_QSFP28_N_P(X+3) */ + {1, 0, 5}, /* map_modsel[4] = MODSEL_QSFP28_N_P(X+4) */ + {1, 1, 2}, /* map_modsel[5] = MODSEL_QSFP28_N_P(X+5) */ + {2, 0, 0}, /* map_modsel[6] = MODSEL_QSFP28_N_P(X+6) */ + {2, 0, 5}, /* map_modsel[7] = MODSEL_QSFP28_N_P(X+7) */ + {2, 1, 2}, /* map_modsel[7] = MODSEL_QSFP28_N_P(X+7) */ + }, +}; + + +struct ioexp_map_s ioexp_map_sequoia_nabc = { + + .chip_amount = 3, + .data_width = 2, + + .map_present = { {2, 1, 0}, /* map_present[0] = MOD_ABS_PORT(X) */ + {2, 1, 1}, /* map_present[1] = MOD_ABS_PORT(X+1) */ + {2, 1, 2}, /* map_present[2] = MOD_ABS_PORT(X+2) */ + {2, 1, 3}, /* map_present[3] = MOD_ABS_PORT(X+3) */ + {2, 1, 4}, /* map_present[4] = MOD_ABS_PORT(X+4) */ + {2, 1, 5}, /* map_present[5] = MOD_ABS_PORT(X+5) */ + {2, 1, 6}, /* map_present[6] = MOD_ABS_PORT(X+6) */ + {2, 1, 7}, /* map_present[7] = MOD_ABS_PORT(X+7) */ + }, + .map_reset = { {0, 1, 0}, /* map_reset[0] = QRESET_QSFP28_N_P(X) */ + {0, 1, 1}, /* map_reset[1] = QRESET_QSFP28_N_P(X+1) */ + {0, 1, 2}, /* map_reset[2] = QRESET_QSFP28_N_P(X+2) */ + {0, 1, 3}, /* map_reset[3] = QRESET_QSFP28_N_P(X+3) */ + {0, 1, 4}, /* map_reset[4] = QRESET_QSFP28_N_P(X+4) */ + {0, 1, 5}, /* map_reset[5] = QRESET_QSFP28_N_P(X+5) */ + {0, 1, 6}, /* map_reset[6] = QRESET_QSFP28_N_P(X+6) */ + {0, 1, 7}, /* map_reset[7] = QRESET_QSFP28_N_P(X+7) */ + }, + .map_lpmod = { {1, 0, 0}, /* map_lpmod[0] = LPMODE_QSFP28_P(X) */ + {1, 0, 1}, /* map_lpmod[1] = LPMODE_QSFP28_P(X+1) */ + {1, 0, 2}, /* map_lpmod[2] = LPMODE_QSFP28_P(X+2) */ + {1, 0, 3}, /* map_lpmod[3] = LPMODE_QSFP28_P(X+3) */ + {1, 0, 4}, /* map_lpmod[4] = LPMODE_QSFP28_P(X+4) */ + {1, 0, 5}, /* map_lpmod[5] = LPMODE_QSFP28_P(X+5) */ + {1, 0, 6}, /* map_lpmod[6] = LPMODE_QSFP28_P(X+6) */ + {1, 0, 7}, /* map_lpmod[7] = LPMODE_QSFP28_P(X+7) */ + }, + .map_modsel = { {0, 0, 0}, /* map_modsel[0] = MODSEL_QSFP28_N_P(X) */ + {0, 0, 1}, /* map_modsel[1] = MODSEL_QSFP28_N_P(X+1) */ + {0, 0, 2}, /* map_modsel[2] = MODSEL_QSFP28_N_P(X+2) */ + {0, 0, 3}, /* map_modsel[3] = MODSEL_QSFP28_N_P(X+3) */ + {0, 0, 4}, /* map_modsel[4] = MODSEL_QSFP28_N_P(X+4) */ + {0, 0, 5}, /* map_modsel[5] = MODSEL_QSFP28_N_P(X+5) */ + {0, 0, 6}, /* map_modsel[6] = MODSEL_QSFP28_N_P(X+6) */ + {0, 0, 7}, /* map_modsel[7] = MODSEL_QSFP28_N_P(X+7) */ + }, +}; + + +/* ========== Private functions ========== + */ +int check_channel_tier_1(void); + +struct i2c_client * +_get_i2c_client(struct ioexp_obj_s *self, + int chip_id){ + + struct ioexp_i2c_s *i2c_curr_p = self->i2c_head_p; + + if (!(i2c_curr_p)){ + SWPS_ERR("%s: i2c_curr_p is NULL\n", __func__); + return NULL; + } + while (i2c_curr_p){ + if ((i2c_curr_p->chip_id) == chip_id){ + return i2c_curr_p->i2c_client_p; + } + i2c_curr_p = i2c_curr_p->next; + } + SWPS_ERR("%s: not exist! :%d\n", __func__, chip_id); + return NULL; +} + + +static int +_common_ioexp_update_one(struct ioexp_obj_s *self, + struct ioexp_addr_s *ioexp_addr, + int chip_id, + int data_width, + int show_err, + char *caller_name) { + int buf = 0; + int err = 0; + int data_id = 0; + int r_offset = 0; + + for(data_id=0; data_idread_offset[data_id]; + buf = i2c_smbus_read_byte_data(_get_i2c_client(self, chip_id), r_offset); + /* Check error */ + if (buf < 0) { + err = 1; + if (show_err) { + SWPS_INFO("IOEXP-%d read fail! :%d \n", self->ioexp_id, buf); + SWPS_INFO("Dump: :%d :0x%02x :%d, :%s\n", + ioexp_addr->chan_id, ioexp_addr->chip_addr, + ioexp_addr->read_offset[data_id], caller_name); + } + continue; + } + /* Update IOEXP object */ + self->chip_data[chip_id].data[data_id] = (uint8_t)buf; + } + if (err) { + return ERR_IOEXP_UNEXCPT; + } + return 0; +} + + +static int +common_ioexp_update_all(struct ioexp_obj_s *self, + int show_err, + char *caller_name){ + + int err = 0; + int chip_id = 0; + int chip_amount = self->ioexp_map_p->chip_amount; + + for (chip_id=0; chip_idioexp_map_p->map_addr[chip_id]), + chip_id, + self->ioexp_map_p->data_width, + show_err, + caller_name) < 0) { + err = 1; + } + } + if (err) { + return ERR_IOEXP_UNEXCPT; + } + return 0; +} + + +static int +_common_check_by_mode(struct ioexp_obj_s *self){ + + switch (self->mode){ + case IOEXP_MODE_DIRECT: + return self->fsm_4_direct(self); + + case IOEXP_MODE_POLLING: + if (self->state >= 0){ + return 0; + } + switch (self->state){ + case STATE_IOEXP_INIT: + return ERR_IOEXP_UNINIT; + case STATE_IOEXP_ABNORMAL: + return ERR_IOEXP_ABNORMAL; + default: + return ERR_IOEXP_NOSTATE; + } + break; + + default: + break; + } + SWPS_ERR("%s: Exception occurs. :%d \n", __func__, self->mode); + return ERR_IOEXP_UNEXCPT; +} + + +static int +_common_get_bit(struct ioexp_obj_s *self, + struct ioexp_bitmap_s *bitmap_obj_p, + char *func_mane){ + uint8_t buf; + int err_code; + + /* Check and get address */ + err_code = _common_check_by_mode(self); + if (err_code < 0){ + return err_code; + } + if (!bitmap_obj_p){ + SWPS_ERR("Layout config incorrect! :%d :%s\n", + self->ioexp_id, func_mane); + return ERR_IOEXP_BADCONF; + } + /* Get data form cache */ + buf = self->chip_data[bitmap_obj_p->chip_id].data[bitmap_obj_p->ioexp_voffset]; + return (int)(buf >> bitmap_obj_p->bit_shift & 0x01); +} + + +static int +_common_set_bit(struct ioexp_obj_s *self, + struct ioexp_bitmap_s *bitmap_obj_p, + int input_val, + char *func_mane){ + int err_code, target_offset; + uint8_t origin_byte; + uint8_t modify_byte; + + /* Check and get address */ + err_code = _common_check_by_mode(self); + if (err_code < 0){ + return err_code; + } + if (!bitmap_obj_p){ + SWPS_ERR("Layout config incorrect! :%d :%s\n", + self->ioexp_id, func_mane); + return ERR_IOEXP_BADCONF; + } + /* Prepare write date */ + origin_byte = self->chip_data[bitmap_obj_p->chip_id].data[bitmap_obj_p->ioexp_voffset]; + switch (input_val) { + case 0: + modify_byte = origin_byte; + SWP_BIT_CLEAR(modify_byte, bitmap_obj_p->bit_shift); + break; + case 1: + modify_byte = origin_byte; + SWP_BIT_SET(modify_byte, bitmap_obj_p->bit_shift); + break; + default: + SWPS_ERR("Input value incorrect! :%d :%d :%s\n", + input_val, self->ioexp_id, func_mane); + return ERR_IOEXP_BADINPUT; + } + /* Setup i2c client */ + target_offset = self->ioexp_map_p->map_addr[bitmap_obj_p->chip_id].write_offset[bitmap_obj_p->ioexp_voffset]; + /* Write byte to chip via I2C */ + err_code = i2c_smbus_write_byte_data(_get_i2c_client(self, bitmap_obj_p->chip_id), + target_offset, + modify_byte); + /* Update or bollback object */ + if (err_code < 0){ + self->chip_data[bitmap_obj_p->chip_id].data[bitmap_obj_p->ioexp_voffset] = origin_byte; + SWPS_ERR("I2C write fail! :%d :%d :%s :%d\n", + input_val, self->ioexp_id, func_mane, err_code); + return err_code; + } + self->chip_data[bitmap_obj_p->chip_id].data[bitmap_obj_p->ioexp_voffset] = modify_byte; + return 0; +} + + +/* ========== Object public functions ========== + */ +int +common_get_present(struct ioexp_obj_s *self, + int virt_offset){ + + int UNPLUG = 1; + int retval = ERR_IOEXP_UNEXCPT; + + retval = _common_get_bit(self, + &(self->ioexp_map_p->map_present[virt_offset]), + "common_get_present"); + if (retval < 0) { + /* [Note] + * => Transceiver object does not need to handle IOEXP layer issues. + */ + return UNPLUG; + } + return retval; +} + + +int +common_get_tx_fault(struct ioexp_obj_s *self, + int virt_offset){ + /* [Transmit Fault (Tx_Fault)] + * A catastrophic laser fault will activate the transmitter signal, + * TX_FAULT, and disable the laser. This signal is an open collector + * output (pull-up required on the host board). A low signal indicates + * normal laser operation and a high signal indicates a fault. The + * TX_FAULT will be latched high when a laser fault occurs and is + * cleared by toggling the TX_DISABLE input or power cycling the + * transceiver. The transmitter fault condition can also be monitored + * via the two-wire serial interface. + * (address A2, byte 110, bit 2). + * + * 0: Normal + * 1: Abnormal + */ + return _common_get_bit(self, + &(self->ioexp_map_p->map_tx_fault[virt_offset]), + "common_get_tx_fault"); +} + + +int +common_get_rxlos(struct ioexp_obj_s *self, + int virt_offset){ + /* [Receiver Loss of Signal (Rx_LOS)] + * The post-amplification IC also includes transition detection circuitry + * which monitors the ac level of incoming optical signals and provides a + * TTL/CMOS compatible status signal to the host (pin 8). An adequate optical + * input results in a low Rx_LOS output while a high Rx_LOS output indicates + * an unusable optical input. The Rx_LOS thresholds are factory set so that + * a high output indicates a definite optical fault has occurred. Rx_LOS can + * also be monitored via the two-wire serial interface + * (address A2h, byte 110, bit 1). + * + * 0: Normal + * 1: Abnormal + */ + return _common_get_bit(self, + &(self->ioexp_map_p->map_rxlos[virt_offset]), + "common_get_rxlos"); +} + + +int +common_get_tx_disable(struct ioexp_obj_s *self, + int virt_offset){ + + return _common_get_bit(self, + &(self->ioexp_map_p->map_tx_disable[virt_offset]), + "common_get_tx_disable"); +} + + +int +common_get_reset(struct ioexp_obj_s *self, + int virt_offset){ + + return _common_get_bit(self, + &(self->ioexp_map_p->map_reset[virt_offset]), + "common_get_reset"); +} + + +int +common_get_lpmod(struct ioexp_obj_s *self, + int virt_offset){ + + return _common_get_bit(self, + &(self->ioexp_map_p->map_lpmod[virt_offset]), + "common_get_lpmod"); +} + + +int +common_get_modsel(struct ioexp_obj_s *self, + int virt_offset){ + + return _common_get_bit(self, + &(self->ioexp_map_p->map_modsel[virt_offset]), + "common_get_modsel"); +} + + +int +common_get_hard_rs0(struct ioexp_obj_s *self, + int virt_offset){ + + return _common_get_bit(self, + &(self->ioexp_map_p->map_hard_rs0[virt_offset]), + "common_get_hard_rs0"); +} + + +int +common_get_hard_rs1(struct ioexp_obj_s *self, + int virt_offset){ + + return _common_get_bit(self, + &(self->ioexp_map_p->map_hard_rs1[virt_offset]), + "common_get_hard_rs1"); +} + + +int +common_set_tx_disable(struct ioexp_obj_s *self, + int virt_offset, + int input_val){ + + return _common_set_bit(self, + &(self->ioexp_map_p->map_tx_disable[virt_offset]), + input_val, + "common_set_tx_disable"); +} + + +int +common_set_reset(struct ioexp_obj_s *self, + int virt_offset, + int input_val){ + + return _common_set_bit(self, + &(self->ioexp_map_p->map_reset[virt_offset]), + input_val, + "common_set_reset"); +} + + +int +common_set_lpmod(struct ioexp_obj_s *self, + int virt_offset, + int input_val){ + + return _common_set_bit(self, + &(self->ioexp_map_p->map_lpmod[virt_offset]), + input_val, + "common_set_lpmod"); +} + + +int +common_set_modsel(struct ioexp_obj_s *self, + int virt_offset, + int input_val){ + + return _common_set_bit(self, + &(self->ioexp_map_p->map_modsel[virt_offset]), + input_val, + "common_set_modsel"); +} + + +int +common_set_hard_rs0(struct ioexp_obj_s *self, + int virt_offset, + int input_val){ + + return _common_set_bit(self, + &(self->ioexp_map_p->map_hard_rs0[virt_offset]), + input_val, + "common_set_hard_rs0"); +} + + +int +common_set_hard_rs1(struct ioexp_obj_s *self, + int virt_offset, + int input_val){ + + return _common_set_bit(self, + &(self->ioexp_map_p->map_hard_rs1[virt_offset]), + input_val, + "common_set_hard_rs1"); +} + + +int +ioexp_get_not_support(struct ioexp_obj_s *self, + int virt_offset){ + return ERR_IOEXP_NOTSUPPORT; +} + + +int +ioexp_set_not_support(struct ioexp_obj_s *self, + int virt_offset, + int input_val){ + return ERR_IOEXP_NOTSUPPORT; +} + + +int +fake_ioexp_init(struct ioexp_obj_s *self){ + return 1; +} + +int +fake_ioexp_update(struct ioexp_obj_s *self){ + return 1; +} + + +int +fake_update_func(struct ioexp_obj_s *self){ + return 1; +} + +int +fake_get_func(struct ioexp_obj_s *self, + int virt_offset){ + SWPS_WARN("Someone called fake_get_func\n"); + return -1; +} + +int +fake_set_func(struct ioexp_obj_s *self, + int virt_offset, + int input_val){ + SWPS_WARN("Someone called fake_set_func\n"); + return -1; +} + + +/* ========== Initial functions for IO Expander ========== + */ +int +common_ioexp_init(struct ioexp_obj_s *self) { + + int chip_id, offset, err_code; + struct ioexp_addr_s *addr_p; + + /* Setup default value to each physical IO Expander */ + for (chip_id=0; chip_id<(self->ioexp_map_p->chip_amount); chip_id++){ + /* Get address mapping */ + addr_p = &(self->ioexp_map_p->map_addr[chip_id]); + if (!addr_p){ + SWPS_ERR("%s: IOEXP config incorrect! :%d \n", + __func__, chip_id); + return -1; + } + /* Setup default value */ + for (offset=0; offset<(self->ioexp_map_p->data_width); offset++){ + err_code = i2c_smbus_write_byte_data(_get_i2c_client(self, chip_id), + addr_p->write_offset[offset], + addr_p->data_default[offset]); + if (err_code < 0){ + SWPS_ERR("%s: set default fail! :%d \n", + __func__, err_code); + return ERR_IOEXP_UNEXCPT; + } + } + } + /* Check and update info to object */ + err_code = self->update_all(self, 1, "common_ioexp_init"); + if (err_code < 0) { + SWPS_ERR("%s: update_all() fail! :%d \n", + __func__, err_code); + return ERR_IOEXP_UNEXCPT; + } + return 0; +} + + +/* ========== Object functions for Final State Machine ========== + */ +int +_is_channel_ready(struct ioexp_obj_s *self){ + + int buf = 0; + int chip_id = 0; /* Use first chip which be registered */ + int data_id = 0; /* Use first byte which be registered */ + struct ioexp_addr_s *ioexp_addr = NULL; + + ioexp_addr = &(self->ioexp_map_p->map_addr[chip_id]); + if (!ioexp_addr){ + SWPS_ERR("%s: config incorrect!\n", __func__); + return ERR_IOEXP_UNEXCPT; + } + buf = i2c_smbus_read_byte_data(_get_i2c_client(self, chip_id), + ioexp_addr->read_offset[data_id]); + if (buf >= 0){ + return 1; + } + return 0; +} + +int +_ioexp_init_handler(struct ioexp_obj_s *self){ + + int return_val; + + switch (self->mode) { + case IOEXP_MODE_DIRECT: + return_val = self->init(self); + if (return_val < 0){ + self->state = STATE_IOEXP_ABNORMAL; + } else { + self->state = STATE_IOEXP_NORMAL; + } + return return_val; + + case IOEXP_MODE_POLLING: + /* Check system and channel is ready */ + if (self->state == STATE_IOEXP_INIT){ + if (!_is_channel_ready(self)){ + self->state = STATE_IOEXP_INIT; + SWPS_WARN("%s: IOEXP:%d channel not ready.\n", + __func__, self->ioexp_id); + return 0; + } + } + /* Execute initial callback */ + return_val = self->init(self); + if (return_val < 0){ + self->state = STATE_IOEXP_ABNORMAL; + } else { + self->state = STATE_IOEXP_NORMAL; + } + return return_val; + + default: + break; + } + SWPS_ERR("%s: exception occur :%d\n", __func__, self->mode); + return ERR_IOEXP_UNEXCPT; +} + + +int +common_ioexp_fsm_4_direct(struct ioexp_obj_s *self){ + + int result_val; + int show_err = 1; + char *func_mane = "common_ioexp_fsm_4_direct"; + + switch (self->state){ + case STATE_IOEXP_INIT: + result_val = _ioexp_init_handler(self); + /* Exception case: terminate initial procedure */ + if(result_val < 0){ + /* Initial fail */ + return result_val; + } + if(self->state == STATE_IOEXP_INIT){ + /* Keep in INIT state, and return error */ + return ERR_IOEXP_UNINIT; + } + /* Case: Initial done */ + return 0; + + case STATE_IOEXP_NORMAL: + result_val = self->update_all(self, show_err, func_mane); + if (result_val < 0){ + SWPS_INFO("%s: NORMAL -> ABNORMAL :%d\n", + __func__, result_val); + self->state = STATE_IOEXP_ABNORMAL; + return result_val; + } + self->state = STATE_IOEXP_NORMAL; + return 0; + + case STATE_IOEXP_ABNORMAL: + result_val = self->update_all(self, show_err, func_mane); + if (result_val < 0){ + self->state = STATE_IOEXP_ABNORMAL; + return result_val; + } + SWPS_DEBUG("%s: ABNORMAL -> NORMAL :%d\n", + __func__, result_val); + self->state = STATE_IOEXP_NORMAL; + return 0; + + default: + break; + } + SWPS_ERR("%s: Exception occurs :%d\n", + __func__, self->state); + return ERR_IOEXP_UNEXCPT; +} + + +int +common_ioexp_fsm_4_polling(struct ioexp_obj_s *self){ + + int result_val, i, show_e; + int fail_retry = 3; + char *func_name = "common_ioexp_fsm_4_polling"; + +#ifdef DEBUG_SWPS + show_e = 1; +#else + show_e = 0; +#endif + + switch (self->state){ + case STATE_IOEXP_INIT: + result_val = _ioexp_init_handler(self); + /* Exception case: terminate initial procedure */ + if(result_val < 0){ + /* Initial fail */ + return result_val; + } + /* Case: System (Channel) not ready */ + if(self->state == STATE_IOEXP_INIT){ + /* Keep in INIT state, wait and retry */ + return 0; + } + /* Case: Initial done */ + SWPS_INFO("IOEXP-%d: initial done. :%d\n", + self->ioexp_id, self->ioexp_type); + return result_val; + + case STATE_IOEXP_NORMAL: + /* Retry mechanism for case of i2c topology not stable */ + for (i=0; iupdate_all(self, show_e, func_name); + if (result_val >= 0) { + self->state = STATE_IOEXP_NORMAL; + return 0; + } + if (check_channel_tier_1() < 0) { + SWPS_INFO("%s: detect I2C crash :%d\n", + __func__, self->ioexp_id); + break; + } + SWPS_DEBUG("IOEXP-%d: unstable :%d\n", + self->ioexp_id, result_val); + } + SWPS_INFO("IOEXP-%d: NORMAL -> ABNORMAL :%d\n", + self->ioexp_id, result_val); + self->state = STATE_IOEXP_ABNORMAL; + return result_val; + + case STATE_IOEXP_ABNORMAL: + result_val = self->update_all(self, show_e, func_name); + if (result_val < 0){ + self->state = STATE_IOEXP_ABNORMAL; + return result_val; + } + SWPS_INFO("IOEXP-%d: ABNORMAL -> NORMAL :%d\n", + self->ioexp_id, result_val); + self->state = STATE_IOEXP_NORMAL; + return 0; + + default: + break; + } + SWPS_ERR("IOEXP-%d: Exception occurs :%d\n", + self->ioexp_id, self->state); + return ERR_IOEXP_UNEXCPT; +} + + +/* ========== Object private functions for check & update ========== + */ +int +common_ioexp_check(struct ioexp_obj_s *self){ + + int result; + + if (self->mode != IOEXP_MODE_POLLING){ + SWPS_ERR("%s: not polling mode :%d\n", + __func__, self->mode); + return ERR_IOEXP_NOTSUPPORT; + } + mutex_lock(&self->lock); + result = self->fsm_4_polling(self); + mutex_unlock(&self->lock); + return result; +} + + +/* ========== Functions for Factory pattern ========== + */ +static struct ioexp_map_s * +get_ioexp_map(int ioexp_type){ + switch (ioexp_type){ + case IOEXP_TYPE_MAGINOLIA_NAB: + return &ioexp_map_magnolia_nab; + case IOEXP_TYPE_MAGINOLIA_7AB: + case IOEXP_TYPE_SPRUCE_7AB: + return &ioexp_map_magnolia_7ab; + case IOEXP_TYPE_REDWOOD_P01P08: + return &ioexp_map_redwood_p01p08_p17p24; + case IOEXP_TYPE_REDWOOD_P09P16: + return &ioexp_map_redwood_p09p16_p25p32; + case IOEXP_TYPE_HUDSON32IGA_P01P08: + return &ioexp_map_hudson32iga_p01p08_p17p24; + case IOEXP_TYPE_HUDSON32IGA_P09P16: + return &ioexp_map_hudson32iga_p09p16_p25p32; + case IOEXP_TYPE_CYPRESS_NABC: + return &ioexp_map_cypress_nabc; + case IOEXP_TYPE_CYPRESS_7ABC: + return &ioexp_map_cypress_7abc; + case IOEXP_TYPE_TAHOE_5A: + return &ioexp_map_tahoe_5a; + case IOEXP_TYPE_TAHOE_6ABC: + return &ioexp_map_tahoe_6abc; + case IOEXP_TYPE_SEQUOIA_NABC: + return &ioexp_map_sequoia_nabc; + default: + return NULL; + } +} + + +int +setup_ioexp_ssize_attr(struct ioexp_obj_s *self, + struct ioexp_map_s *ioexp_map_p, + int ioexp_id, + int ioexp_type, + int run_mode){ + switch (run_mode){ + case IOEXP_MODE_POLLING: /* Direct access device mode */ + case IOEXP_MODE_DIRECT: /* Polling mode, read from cache */ + self->mode = run_mode; + break; + default: + SWPS_ERR("%s: non-defined run_mode:%d\n", + __func__, run_mode); + self->mode = ERR_IOEXP_UNEXCPT; + return ERR_IOEXP_UNEXCPT; + } + self->ioexp_id = ioexp_id; + self->ioexp_type = ioexp_type; + self->ioexp_map_p = ioexp_map_p; + self->state = STATE_IOEXP_INIT; + mutex_init(&self->lock); + return 0; +} + + +static int +setup_addr_mapping(struct ioexp_obj_s *self, + struct ioexp_addr_s *addr_map_p){ + if (!addr_map_p){ + SWPS_ERR("%s: map is null\n", __func__); + return -1; + } + self->ioexp_map_p->map_addr = addr_map_p; + return 0; +} + + +static int +setup_ioexp_public_cb(struct ioexp_obj_s *self, + int ioexp_type){ + + switch (ioexp_type){ + case IOEXP_TYPE_MAGINOLIA_NAB: + self->get_present = common_get_present; + self->get_tx_fault = common_get_tx_fault; + self->get_rxlos = common_get_rxlos; + self->get_tx_disable = common_get_tx_disable; + self->get_reset = ioexp_get_not_support; + self->get_lpmod = ioexp_get_not_support; + self->get_modsel = ioexp_get_not_support; + self->get_hard_rs0 = ioexp_get_not_support; + self->get_hard_rs1 = ioexp_get_not_support; + self->set_tx_disable = common_set_tx_disable; + self->set_reset = ioexp_set_not_support; + self->set_lpmod = ioexp_set_not_support; + self->set_modsel = ioexp_set_not_support; + self->set_hard_rs0 = ioexp_set_not_support; + self->set_hard_rs1 = ioexp_set_not_support; + return 0; + case IOEXP_TYPE_CYPRESS_NABC: + self->get_present = common_get_present; + self->get_tx_fault = common_get_tx_fault; + self->get_rxlos = common_get_rxlos; + self->get_tx_disable = common_get_tx_disable; + self->get_reset = ioexp_get_not_support; + self->get_lpmod = ioexp_get_not_support; + self->get_modsel = ioexp_get_not_support; + self->get_hard_rs0 = common_get_hard_rs0; + self->get_hard_rs1 = common_get_hard_rs1; + self->set_tx_disable = common_set_tx_disable; + self->set_reset = ioexp_set_not_support; + self->set_lpmod = ioexp_set_not_support; + self->set_modsel = ioexp_set_not_support; + self->set_hard_rs0 = common_set_hard_rs0; + self->set_hard_rs1 = common_set_hard_rs1; + return 0; + case IOEXP_TYPE_MAGINOLIA_7AB: + case IOEXP_TYPE_SPRUCE_7AB: + case IOEXP_TYPE_REDWOOD_P01P08: + case IOEXP_TYPE_REDWOOD_P09P16: + case IOEXP_TYPE_HUDSON32IGA_P01P08: + case IOEXP_TYPE_HUDSON32IGA_P09P16: + case IOEXP_TYPE_CYPRESS_7ABC: + case IOEXP_TYPE_TAHOE_5A: + case IOEXP_TYPE_TAHOE_6ABC: + case IOEXP_TYPE_SEQUOIA_NABC: + self->get_present = common_get_present; + self->get_tx_fault = ioexp_get_not_support; + self->get_rxlos = ioexp_get_not_support; + self->get_tx_disable = ioexp_get_not_support; + self->get_reset = common_get_reset; + self->get_lpmod = common_get_lpmod; + self->get_modsel = common_get_modsel; + self->get_hard_rs0 = ioexp_get_not_support; + self->get_hard_rs1 = ioexp_get_not_support; + self->set_tx_disable = ioexp_set_not_support; + self->set_reset = common_set_reset; + self->set_lpmod = common_set_lpmod; + self->set_modsel = common_set_modsel; + self->set_hard_rs0 = ioexp_set_not_support; + self->set_hard_rs1 = ioexp_set_not_support; + return 0; + + default: + SWPS_ERR("%s: type:%d incorrect!\n", __func__, ioexp_type); + break; + } + return ERR_IOEXP_UNEXCPT; +} + + +static int +setup_ioexp_private_cb(struct ioexp_obj_s *self, + int ioexp_type){ + + switch (ioexp_type){ + case IOEXP_TYPE_MAGINOLIA_NAB: + case IOEXP_TYPE_MAGINOLIA_7AB: + case IOEXP_TYPE_SPRUCE_7AB: + case IOEXP_TYPE_REDWOOD_P01P08: + case IOEXP_TYPE_REDWOOD_P09P16: + case IOEXP_TYPE_HUDSON32IGA_P01P08: + case IOEXP_TYPE_HUDSON32IGA_P09P16: + case IOEXP_TYPE_CYPRESS_NABC: + case IOEXP_TYPE_CYPRESS_7ABC: + case IOEXP_TYPE_TAHOE_5A: + case IOEXP_TYPE_TAHOE_6ABC: + case IOEXP_TYPE_SEQUOIA_NABC: + self->init = common_ioexp_init; + self->check = common_ioexp_check; + self->update_all = common_ioexp_update_all; + self->fsm_4_direct = common_ioexp_fsm_4_direct; + self->fsm_4_polling = common_ioexp_fsm_4_polling; + return 0; + + default: + SWPS_ERR("%s: type:%d incorrect!\n", __func__, ioexp_type); + break; + } + return ERR_IOEXP_UNEXCPT; +} + + +static int +setup_i2c_client_one(struct ioexp_obj_s *self, + int chip_id){ + + char *err_msg = "ERROR"; + struct i2c_adapter *adap = NULL; + struct i2c_client *client = NULL; + struct ioexp_i2c_s *i2c_obj_p = NULL; + struct ioexp_i2c_s *i2c_curr_p = NULL; + + int chan_id = self->ioexp_map_p->map_addr[chip_id].chan_id; + adap = i2c_get_adapter(chan_id); + if(!adap){ + err_msg = "Can not get adap!"; + goto err_ioexp_setup_i2c_1; + } + client = kzalloc(sizeof(*client), GFP_KERNEL); + if (!client){ + err_msg = "Can not kzalloc client!"; + goto err_ioexp_setup_i2c_1; + } + i2c_obj_p = kzalloc(sizeof(*i2c_obj_p), GFP_KERNEL); + if (!i2c_obj_p){ + err_msg = "Can not kzalloc i2c_obj_p!"; + goto err_ioexp_setup_i2c_2; + } + client->adapter = adap; + client->addr = self->ioexp_map_p->map_addr[chip_id].chip_addr; + i2c_obj_p->i2c_client_p = client; + i2c_obj_p->chip_id = chip_id; + i2c_obj_p->next = NULL; + if (!self->i2c_head_p){ + self->i2c_head_p = i2c_obj_p; + } else { + i2c_curr_p = self->i2c_head_p; + while (i2c_curr_p->next){ + i2c_curr_p = i2c_curr_p->next; + } + i2c_curr_p->next = i2c_obj_p; + } + return 0; + +err_ioexp_setup_i2c_2: + kfree(client); +err_ioexp_setup_i2c_1: + SWPS_ERR("%s: %s :%d\n", __func__, err_msg, chan_id); + return -1; +} + + +static int +setup_i2c_client(struct ioexp_obj_s* self){ + + int result; + int chip_id = 0; + + for (chip_id=0; chip_id<(self->ioexp_map_p->chip_amount); chip_id++){ + result = setup_i2c_client_one(self, chip_id); + if (result < 0){ + SWPS_ERR("%s fail! :%d\n", __func__, chip_id); + return -1; + } + } + return 0; +} + + +static int +setup_ioexp_config(struct ioexp_obj_s *self) { + + int chip_id, offset, err_code; + struct ioexp_addr_s *addr_p; + + for (chip_id=0; chip_id<(self->ioexp_map_p->chip_amount); chip_id++){ + addr_p = &(self->ioexp_map_p->map_addr[chip_id]); + if (!addr_p){ + SWPS_ERR("IOEXP config incorrect! :%d \n",chip_id); + return -1; + } + for (offset=0; offset<(self->ioexp_map_p->data_width); offset++){ + + err_code = i2c_smbus_write_byte_data(_get_i2c_client(self, chip_id), + addr_p->conf_offset[offset], + addr_p->conf_default[offset]); + + if (err_code < 0){ + SWPS_INFO("%s: set conf fail! :%d \n", __func__, err_code); + return -2; + } + } + } + return 0; +} + + +struct ioexp_obj_s * +_create_ioexp_obj(int ioexp_id, + int ioexp_type, + struct ioexp_addr_s *addr_map_p, + int run_mode){ + + struct ioexp_map_s* ioexp_map_p; + struct ioexp_obj_s* result_p; + struct ioexp_i2c_s *i2c_curr_p; + struct ioexp_i2c_s *i2c_next_p; + + /* Get layout */ + ioexp_map_p = get_ioexp_map(ioexp_type); + if (!ioexp_map_p){ + SWPS_ERR("%s: Invalid ioexp_type\n", __func__); + goto err_create_ioexp_fail; + } + /* Prepare IOEXP object */ + result_p = kzalloc(sizeof(*result_p), GFP_KERNEL); + if (!result_p){ + SWPS_ERR("%s: kzalloc failure!\n", __func__); + goto err_create_ioexp_fail; + } + /* Prepare static size attributes */ + if (setup_ioexp_ssize_attr(result_p, + ioexp_map_p, + ioexp_id, + ioexp_type, + run_mode) < 0){ + goto err_create_ioexp_setup_attr_fail; + } + /* Prepare address mapping */ + if (setup_addr_mapping(result_p, addr_map_p) < 0){ + goto err_create_ioexp_setup_attr_fail; + } + if (setup_i2c_client(result_p) < 0){ + goto err_create_ioexp_setup_i2c_fail; + } + /* Prepare call back functions of object */ + if (setup_ioexp_public_cb(result_p, ioexp_type) < 0){ + goto err_create_ioexp_setup_i2c_fail; + } + if (setup_ioexp_private_cb(result_p, ioexp_type) < 0){ + goto err_create_ioexp_setup_i2c_fail; + } + return result_p; + +err_create_ioexp_setup_i2c_fail: + i2c_curr_p = result_p->i2c_head_p; + i2c_next_p = result_p->i2c_head_p; + while (i2c_curr_p){ + i2c_next_p = i2c_curr_p->next; + kfree(i2c_curr_p->i2c_client_p); + kfree(i2c_curr_p); + i2c_curr_p = i2c_next_p; + } +err_create_ioexp_setup_attr_fail: + kfree(result_p); +err_create_ioexp_fail: + SWPS_ERR("%s: fail! :%d :%d \n", + __func__, ioexp_id, ioexp_type); + return NULL; +} + + +int +create_ioexp_obj(int ioexp_id, + int ioexp_type, + struct ioexp_addr_s *addr_map_p, + int run_mode){ + + struct ioexp_obj_s *ioexp_p = NULL; + + ioexp_p = _create_ioexp_obj(ioexp_id, ioexp_type, + addr_map_p, run_mode); + if (!ioexp_p){ + return -1; + } + if (ioexp_head_p == NULL){ + ioexp_head_p = ioexp_p; + ioexp_tail_p = ioexp_p; + return 0; + } + ioexp_tail_p->next = ioexp_p; + ioexp_tail_p = ioexp_p; + return 0; +} + + +static int +_init_ioexp_obj(struct ioexp_obj_s* self) { + + char *err_msg = "ERR"; + char *func_name = "_init_ioexp_obj"; + + /* Setup IOEXP configure byte */ + if (setup_ioexp_config(self) < 0){ + err_msg = "setup_ioexp_config fail"; + goto err_init_ioexp_obj; + } + /* Setup default data */ + if (_ioexp_init_handler(self) < 0){ + err_msg = "_ioexp_init_handler fail"; + goto err_init_ioexp_obj; + } + /* Update all */ + if (self->state == STATE_IOEXP_NORMAL){ + if (self->update_all(self, 1, func_name) < 0){ + err_msg = "update_all() fail"; + goto err_init_ioexp_obj; + } + } + return 0; + +err_init_ioexp_obj: + SWPS_DEBUG("%s: %s\n", __func__, err_msg); + return -1; +} + + +int +init_ioexp_objs(void){ + /* Return value: + * 0: Success + * -1: Detect topology error + * -2: SWPS internal error + */ + + struct ioexp_obj_s *curr_p = ioexp_head_p; + + if (!curr_p) { + SWPS_ERR("%s: ioexp_head_p is NULL\n", __func__); + return -2; + } + while (curr_p) { + if (_init_ioexp_obj(curr_p) < 0) { + SWPS_DEBUG("%s: _init_ioexp_obj() fail\n", __func__); + return -1; + } + curr_p = curr_p->next; + } + SWPS_DEBUG("%s: done.\n", __func__); + return 0; +} + + +void +clean_ioexp_objs(void){ + + struct ioexp_i2c_s *i2c_curr_p = NULL; + struct ioexp_i2c_s *i2c_next_p = NULL; + struct ioexp_obj_s *ioexp_next_p = NULL; + struct ioexp_obj_s *ioexp_curr_p = ioexp_head_p; + + if (ioexp_head_p == NULL){ + ioexp_tail_p = NULL; + return; + } + while(ioexp_curr_p){ + ioexp_next_p = ioexp_curr_p->next; + i2c_curr_p = ioexp_curr_p->i2c_head_p; + while (i2c_curr_p) { + i2c_next_p = i2c_curr_p->next; + kfree(i2c_curr_p->i2c_client_p); + kfree(i2c_curr_p); + i2c_curr_p = i2c_next_p; + } + kfree(ioexp_curr_p); + ioexp_curr_p = ioexp_next_p; + } + ioexp_tail_p = NULL; + SWPS_DEBUG("%s: done.\n", __func__); +} + + +int +check_ioexp_objs(void){ + + struct ioexp_obj_s *ioexp_curr_p = ioexp_head_p; + + while (ioexp_curr_p){ + if ( (ioexp_curr_p->check(ioexp_curr_p)) < 0){ + SWPS_INFO("check IOEXP-%d fail! :%d\n", + ioexp_curr_p->ioexp_id, ioexp_curr_p->ioexp_type); + return -1; + } + ioexp_curr_p = ioexp_curr_p->next; + } + return 0; +} + + +struct ioexp_obj_s * +get_ioexp_obj(int ioexp_id){ + + struct ioexp_obj_s *result_p = NULL; + struct ioexp_obj_s *ioexp_curr_p = ioexp_head_p; + + while(ioexp_curr_p){ + if (ioexp_curr_p->ioexp_id == ioexp_id){ + result_p = ioexp_curr_p; + break; + } + ioexp_curr_p = ioexp_curr_p->next; + } + return result_p; +} + + +void +unlock_ioexp_all(void) { + + struct ioexp_obj_s *ioexp_curr_p = ioexp_head_p; + + while(ioexp_curr_p){ + mutex_unlock(&ioexp_curr_p->lock); + ioexp_curr_p = ioexp_curr_p->next; + } +} + + +int +lock_ioexp_all(void) { + + struct ioexp_obj_s *ioexp_curr_p = ioexp_head_p; + + while(ioexp_curr_p){ + mutex_lock(&ioexp_curr_p->lock); + ioexp_curr_p = ioexp_curr_p->next; + } + return 0; +} + + +int +check_channel_tier_1(void) { + + if ( (!_is_channel_ready(ioexp_head_p)) && + (!_is_channel_ready(ioexp_tail_p)) ){ + return -1; + } + return 0; +} + + +static int +_scan_channel_tier_1(int force, + int show_err) { + + struct ioexp_obj_s *ioexp_curr_p = ioexp_head_p; + int ready = 0; + + if (!ioexp_curr_p) { + goto err_scan_tier_1_channel; + } + while(ioexp_curr_p) { + ready = _is_channel_ready(ioexp_curr_p); + if ((!ready) && (!force)) { + goto err_scan_tier_1_channel; + } + ioexp_curr_p = ioexp_curr_p->next; + } + return 0; + +err_scan_tier_1_channel: + if (show_err) { + if (ioexp_curr_p) { + SWPS_INFO("%s: IOEXP-%d fail\n", __func__, ioexp_curr_p->ioexp_id); + } else { + SWPS_INFO("%s: IOEXP is null.\n", __func__); + } + } + return -1; +} + + +static int +_scan_channel_tier_1_single(void) { + + int ret = 0; + int chan_id = 0; + int fake_cid = 0; + int fake_offs = 0; + int fake_addr = 0; + struct i2c_adapter *adap = NULL; + struct i2c_client *client = NULL; + + if (ioexp_head_p->ioexp_id != ioexp_tail_p->ioexp_id) { + return 0; + } + /* Setup i2c_client */ + chan_id = ioexp_head_p->ioexp_map_p->map_addr[fake_cid].chan_id; + fake_addr = ioexp_head_p->ioexp_map_p->map_addr[fake_cid].chip_addr; + adap = i2c_get_adapter((chan_id + 1)); + if(!adap){ + SWPS_INFO("%s: Can not get adap!\n", __func__); + return 0; + } + client = kzalloc(sizeof(*client), GFP_KERNEL); + if (!client){ + SWPS_INFO("%s: Can not kzalloc client!\n", __func__); + return 0; + } + client->adapter = adap; + client->addr = fake_addr; + /* Fouce move ioexp ptr to next */ + ret = i2c_smbus_read_byte_data(client, fake_offs); + SWPS_DEBUG("%s: move ioexp_ptr done. :%d\n", __func__, ret); + kfree(client); + return 1; +} + + +int +resync_channel_tier_1(void) { + + char *emsg = "ERR"; + + if (!ioexp_head_p) { + emsg = "ioexp_head_p is NULL"; + goto err_resync_ioexp_status_1; + } + /* Run all */ + if (ioexp_head_p->ioexp_id == ioexp_tail_p->ioexp_id) { + _scan_channel_tier_1_single(); + } else { + _scan_channel_tier_1(1, 0); + } + /* Check all */ + if (_scan_channel_tier_1(0, 1) < 0) { + emsg = "resync tier-1 channel fail"; + goto err_resync_ioexp_status_1; + } + return 0; + +err_resync_ioexp_status_1: + SWPS_ERR("%s: %s\n", __func__, emsg); + return -1; +} + + + + + + diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/io_expander.h b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/io_expander.h new file mode 100644 index 000000000000..4e39fcefa620 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/io_expander.h @@ -0,0 +1,173 @@ +#ifndef IO_EXPANDER_H +#define IO_EXPANDER_H + +#include + + +/* IOEXP type define (SFP series) */ +#define IOEXP_TYPE_MAGINOLIA_NAB (10101) +#define IOEXP_TYPE_CYPRESS_NABC (10102) + +/* IOEXP type define (QSFP series) */ +#define IOEXP_TYPE_MAGINOLIA_7AB (10201) +#define IOEXP_TYPE_REDWOOD_P01P08 (10202) +#define IOEXP_TYPE_REDWOOD_P09P16 (10203) +#define IOEXP_TYPE_HUDSON32IGA_P01P08 (10204) +#define IOEXP_TYPE_HUDSON32IGA_P09P16 (10205) +#define IOEXP_TYPE_SPRUCE_7AB (10206) +#define IOEXP_TYPE_CYPRESS_7ABC (10207) +#define IOEXP_TYPE_TAHOE_5A (10208) +#define IOEXP_TYPE_TAHOE_6ABC (10209) +#define IOEXP_TYPE_SEQUOIA_NABC (10210) + +/* IOEXP mode define */ +#define IOEXP_MODE_POLLING (19000) +#define IOEXP_MODE_DIRECT (19001) + +/* IOEXP state define */ +#define STATE_IOEXP_NORMAL (0) +#define STATE_IOEXP_INIT (-1) +#define STATE_IOEXP_ABNORMAL (-2) + +/* IOEXP error code define */ +#define ERR_IOEXP_NOTSUPPORT (-100) +#define ERR_IOEXP_UNINIT (-101) +#define ERR_IOEXP_BADCONF (-102) +#define ERR_IOEXP_ABNORMAL (-103) +#define ERR_IOEXP_NOSTATE (-104) +#define ERR_IOEXP_BADINPUT (-105) +#define ERR_IOEXP_UNEXCPT (-199) + + +#define SWPS_INFO(fmt, args...) printk( KERN_INFO "[SWPS] " fmt, ##args) +#define SWPS_WARN(fmt, args...) printk( KERN_WARNING "[SWPS] " fmt, ##args) +#define SWPS_ERR(fmt, args...) printk( KERN_ERR "[SWPS] " fmt, ##args) + +#ifdef DEBUG_SWPS +# define SWPS_DEBUG(fmt, args...) printk( KERN_DEBUG "[SWPS] " fmt, ##args) +#else +# define SWPS_DEBUG(fmt, args...) +#endif + + +struct ioexp_addr_s { + int chan_id; + int chip_addr; + int read_offset[8]; + int write_offset[8]; + int conf_offset[8]; + uint8_t data_default[8]; + uint8_t conf_default[8]; +}; + +struct ioexp_i2c_s { + int chip_id; + struct i2c_client *i2c_client_p; + struct ioexp_i2c_s *next; +}; + + +struct ioexp_bitmap_s { + int chip_id; /* IOEXP chip id */ + int ioexp_voffset; /* IOEXP virtual offset */ + int bit_shift; +}; + +struct ioexp_map_s { + int chip_amount; /* Number of chips that IOEXP object content */ + int data_width; /* Number of (Read/Write/Config) bytes */ + struct ioexp_addr_s *map_addr; /* Chip address info */ + struct ioexp_bitmap_s map_present[10]; /* IOEXP for SFP / QSFP */ + struct ioexp_bitmap_s map_tx_disable[10]; /* IOEXP for SFP */ + struct ioexp_bitmap_s map_tx_fault[10]; /* IOEXP for SFP */ + struct ioexp_bitmap_s map_rxlos[10]; /* IOEXP for SFP */ + struct ioexp_bitmap_s map_reset[10]; /* IOEXP for QSFP */ + struct ioexp_bitmap_s map_lpmod[10]; /* IOEXP for QSFP */ + struct ioexp_bitmap_s map_modsel[10]; /* IOEXP for QSFP */ + struct ioexp_bitmap_s map_hard_rs0[10]; /* IOEXP for QSFP */ + struct ioexp_bitmap_s map_hard_rs1[10]; /* IOEXP for QSFP */ +}; + +struct ioexp_data_s { + uint8_t data[8]; +}; + +struct ioexp_obj_s { + + /* ============================ + * Object public property + * ============================ + */ + int ioexp_id; + int ioexp_type; + + /* ============================ + * Object private property + * ============================ + */ + struct ioexp_data_s chip_data[16]; /* Max: 8-ioexp in one virt-ioexp(ioexp_obj) */ + struct ioexp_map_s *ioexp_map_p; + struct ioexp_obj_s *next; + struct ioexp_i2c_s *i2c_head_p; + struct mutex lock; + int mode; + int state; + + /* =========================================== + * Object public functions + * =========================================== + */ + int (*get_present)(struct ioexp_obj_s *self, int virt_offset); + int (*get_tx_fault)(struct ioexp_obj_s *self, int virt_offset); + int (*get_rxlos)(struct ioexp_obj_s *self, int virt_offset); + int (*get_tx_disable)(struct ioexp_obj_s *self, int virt_offset); + int (*get_reset)(struct ioexp_obj_s *self, int virt_offset); + int (*get_lpmod)(struct ioexp_obj_s *self, int virt_offset); + int (*get_modsel)(struct ioexp_obj_s *self, int virt_offset); + int (*get_hard_rs0)(struct ioexp_obj_s *self, int virt_offset); + int (*get_hard_rs1)(struct ioexp_obj_s *self, int virt_offset); + int (*set_tx_disable)(struct ioexp_obj_s *self, int virt_offset, int input_val); + int (*set_reset)(struct ioexp_obj_s *self, int virt_offset, int input_val); + int (*set_lpmod)(struct ioexp_obj_s *self, int virt_offset, int input_val); + int (*set_modsel)(struct ioexp_obj_s *self, int virt_offset, int input_val); + int (*set_hard_rs0)(struct ioexp_obj_s *self, int virt_offset, int input_val); + int (*set_hard_rs1)(struct ioexp_obj_s *self, int virt_offset, int input_val); + + /* =========================================== + * Object private functions + * =========================================== + */ + int (*init)(struct ioexp_obj_s *self); + int (*check)(struct ioexp_obj_s *self); + int (*update_all)(struct ioexp_obj_s *self, int show_err, char *caller_name); + int (*fsm_4_direct)(struct ioexp_obj_s* self); + int (*fsm_4_polling)(struct ioexp_obj_s* self); +}; + + +struct ioexp_obj_s* get_ioexp_obj(int ioexp_id); +int create_ioexp_obj(int ioexp_id, + int ioexp_type, + struct ioexp_addr_s *addr_map_p, + int run_mode); +int init_ioexp_objs(void); +int check_ioexp_objs(void); +void clean_ioexp_objs(void); + +void unlock_ioexp_all(void); +int lock_ioexp_all(void); + +int check_channel_tier_1(void); +int resync_channel_tier_1(void); + +/* Macro for bit control */ +#define SWP_BIT_SET(byte_val,bit_shift) ((byte_val) |= (1<<(bit_shift))) +#define SWP_BIT_CLEAR(byte_val,bit_shift) ((byte_val) &= ~(1<<(bit_shift))) + + +#endif /* IO_EXPANDER_H */ + + + + + diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/transceiver.c b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/transceiver.c new file mode 100644 index 000000000000..0bbd78935433 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/transceiver.c @@ -0,0 +1,8212 @@ +#include +#include +#include +#include +#include "io_expander.h" +#include "transceiver.h" + + +/* ========== Register EEPROM address mapping ========== + */ +struct eeprom_map_s eeprom_map_sfp = { + .addr_br =0x50, .page_br =-1, .offset_br =12, .length_br =1, + .addr_cdr =-1, .page_cdr =-1, .offset_cdr =-1, .length_cdr =-1, + .addr_comp_rev =0x50, .page_comp_rev =-1, .offset_comp_rev =94, .length_comp_rev =1, + .addr_connector =0x50, .page_connector =-1, .offset_connector =2, .length_connector =1, + .addr_diag_type =0x50, .page_diag_type =-1, .offset_diag_type =92 , .length_diag_type =1, + .addr_extbr =-1, .page_extbr =-1, .offset_extbr =-1, .length_extbr =-1, + .addr_ext_id =0x50, .page_ext_id =-1, .offset_ext_id =1, .length_ext_id =1, + .addr_id =0x50, .page_id =-1, .offset_id =0, .length_id =1, + .addr_len_sm =0x50, .page_len_sm =-1, .offset_len_sm =15, .length_len_sm =1, + .addr_len_smf =0x50, .page_len_smf =-1, .offset_len_smf =14, .length_len_smf =1, + .addr_len_om1 =0x50, .page_len_om1 =-1, .offset_len_om1 =17, .length_len_om1 =1, + .addr_len_om2 =0x50, .page_len_om2 =-1, .offset_len_om2 =16, .length_len_om2 =1, + .addr_len_om3 =0x50, .page_len_om3 =-1, .offset_len_om3 =19, .length_len_om3 =1, + .addr_len_om4 =0x50, .page_len_om4 =-1, .offset_len_om4 =18, .length_len_om4 =1, + .addr_option =0x50, .page_option =-1, .offset_option =64, .length_option =2, + .addr_rate_id =0x50, .page_rate_id =-1, .offset_rate_id =13, .length_rate_id =1, + .addr_rx_am =-1, .page_rx_am =-1, .offset_rx_am =-1, .length_rx_am =-1, + .addr_rx_em =0x51, .page_rx_em =-1, .offset_rx_em =115, .length_rx_em =1, + .addr_rx_los =-1, .page_rx_los =-1, .offset_rx_los =-1, .length_rx_los =-1, + .addr_rx_power =0x51, .page_rx_power =-1, .offset_rx_power =104, .length_rx_power =2, + .addr_soft_rs0 =0x51, .page_soft_rs0 =-1, .offset_soft_rs0 =110, .length_soft_rs0 =1, + .addr_soft_rs1 =0x51, .page_soft_rs1 =-1, .offset_soft_rs1 =118, .length_soft_rs0 =1, + .addr_temp =0x51, .page_temp =-1, .offset_temp =96, .length_temp =2, + .addr_trancomp =0x50, .page_trancomp =-1, .offset_trancomp =3, .length_trancomp =8, + .addr_trancomp_ext =0x50, .page_trancomp_ext =-1, .offset_trancomp_ext =36, .length_trancomp_ext =1, + .addr_tx_bias =0x51, .page_tx_bias =-1, .offset_tx_bias =100, .length_tx_bias =2, + .addr_tx_disable =-1, .page_tx_disable =-1, .offset_tx_disable =-1, .length_tx_disable =-1, + .addr_tx_eq =0x51, .page_tx_eq =-1, .offset_tx_eq =114, .length_tx_eq =1, + .addr_tx_fault =-1, .page_tx_fault =-1, .offset_tx_fault =-1, .length_tx_fault =-1, + .addr_tx_power =0x51, .page_tx_power =-1, .offset_tx_power =102, .length_tx_power =2, + .addr_vendor_name =0x50, .page_vendor_name =-1, .offset_vendor_name =20, .length_vendor_name =16, + .addr_vendor_pn =0x50, .page_vendor_pn =-1, .offset_vendor_pn =40, .length_vendor_pn =16, + .addr_vendor_rev =0x50, .page_vendor_rev =-1, .offset_vendor_rev =56, .length_vendor_rev =4, + .addr_vendor_sn =0x50, .page_vendor_sn =-1, .offset_vendor_sn =68, .length_vendor_sn =16, + .addr_voltage =0x51, .page_voltage =-1, .offset_voltage =98, .length_voltage =2, + .addr_wavelength =0x50, .page_wavelength =-1, .offset_wavelength =60, .length_wavelength =2, +}; + +struct eeprom_map_s eeprom_map_qsfp = { + .addr_br =0x50, .page_br =0, .offset_br =140, .length_br =1, + .addr_cdr =-1, .page_cdr =-1, .offset_cdr =-1, .length_cdr =-1, + .addr_comp_rev =0x50, .page_comp_rev =-1, .offset_comp_rev =1, .length_comp_rev =1, + .addr_connector =0x50, .page_connector =0, .offset_connector =130, .length_connector =1, + .addr_diag_type =0x50, .page_diag_type =0, .offset_diag_type =220, .length_diag_type =1, + .addr_extbr =0x50, .page_extbr =0, .offset_extbr =222, .length_extbr =1, + .addr_ext_id =0x50, .page_ext_id =0, .offset_ext_id =129, .length_ext_id =1, + .addr_id =0x50, .page_id =0, .offset_id =128, .length_id =1, + .addr_len_sm =-1, .page_len_sm =-1, .offset_len_sm =-1, .length_len_sm =-1, + .addr_len_smf =0x50, .page_len_smf =0, .offset_len_smf =142, .length_len_smf =1, + .addr_len_om1 =0x50, .page_len_om1 =0, .offset_len_om1 =145, .length_len_om1 =1, + .addr_len_om2 =0x50, .page_len_om2 =0, .offset_len_om2 =144, .length_len_om2 =1, + .addr_len_om3 =0x50, .page_len_om3 =0, .offset_len_om3 =143, .length_len_om3 =1, + .addr_len_om4 =0x50, .page_len_om4 =0, .offset_len_om4 =146, .length_len_om4 =1, + .addr_option =0x50, .page_option =0, .offset_option =193, .length_option =3, + .addr_rate_id =-1, .page_rate_id =-1, .offset_rate_id =-1, .length_rate_id =-1, + .addr_rx_am =-1, .page_rx_am =-1, .offset_rx_am =-1, .length_rx_am =-1, + .addr_rx_em =-1, .page_rx_em =-1, .offset_rx_em =-1, .length_rx_em =-1, + .addr_rx_los =0x50, .page_rx_los =-1, .offset_rx_los =3, .length_rx_los =1, + .addr_rx_power =0x50, .page_rx_power =-1, .offset_rx_power =34, .length_rx_power =8, + .addr_soft_rs0 =-1, .page_soft_rs0 =-1, .offset_soft_rs0 =-1, .length_soft_rs0 =-1, + .addr_soft_rs1 =-1, .page_soft_rs1 =-1, .offset_soft_rs1 =-1, .length_soft_rs0 =-1, + .addr_temp =0x50, .page_temp =-1, .offset_temp =22, .length_temp =2, + .addr_trancomp =0x50, .page_trancomp =0, .offset_trancomp =131, .length_trancomp =8, + .addr_trancomp_ext =0x50, .page_trancomp_ext =0, .offset_trancomp_ext =192, .length_trancomp_ext =1, + .addr_tx_bias =0x50, .page_tx_bias =-1, .offset_tx_bias =42, .length_tx_bias =8, + .addr_tx_disable =0x50, .page_tx_disable =-1, .offset_tx_disable =86, .length_tx_disable =1, + .addr_tx_eq =-1, .page_tx_eq =-1, .offset_tx_eq =-1, .length_tx_eq =-1, + .addr_tx_fault =0x50, .page_tx_fault =-1, .offset_tx_fault =4, .length_tx_fault =1, + .addr_tx_power =0x50, .page_tx_power =-1, .offset_tx_power =50, .length_tx_power =8, + .addr_vendor_name =0x50, .page_vendor_name =0, .offset_vendor_name =148, .length_vendor_name =16, + .addr_vendor_pn =0x50, .page_vendor_pn =0, .offset_vendor_pn =168, .length_vendor_pn =16, + .addr_vendor_rev =0x50, .page_vendor_rev =0, .offset_vendor_rev =184, .length_vendor_rev =2, + .addr_vendor_sn =0x50, .page_vendor_sn =0, .offset_vendor_sn =196, .length_vendor_sn =16, + .addr_voltage =0x50, .page_voltage =-1, .offset_voltage =26, .length_voltage =2, + .addr_wavelength =0x50, .page_wavelength =0, .offset_wavelength =186, .length_wavelength =2, +}; + +struct eeprom_map_s eeprom_map_qsfp28 = { + .addr_br =0x50, .page_br =0, .offset_br =140, .length_br =1, + .addr_cdr =0x50, .page_cdr =-1, .offset_cdr =98, .length_cdr =1, + .addr_comp_rev =0x50, .page_comp_rev =-1, .offset_comp_rev =1, .length_comp_rev =1, + .addr_connector =0x50, .page_connector =0, .offset_connector =130, .length_connector =1, + .addr_diag_type =0x50, .page_diag_type =0, .offset_diag_type =220, .length_diag_type =1, + .addr_extbr =0x50, .page_extbr =0, .offset_extbr =222, .length_extbr =1, + .addr_ext_id =0x50, .page_ext_id =0, .offset_ext_id =129, .length_ext_id =1, + .addr_id =0x50, .page_id =0, .offset_id =128, .length_id =1, + .addr_len_sm =-1, .page_len_sm =-1, .offset_len_sm =-1, .length_len_sm =-1, + .addr_len_smf =0x50, .page_len_smf =0, .offset_len_smf =142, .length_len_smf =1, + .addr_len_om1 =0x50, .page_len_om1 =0, .offset_len_om1 =145, .length_len_om1 =1, + .addr_len_om2 =0x50, .page_len_om2 =0, .offset_len_om2 =144, .length_len_om2 =1, + .addr_len_om3 =0x50, .page_len_om3 =0, .offset_len_om3 =143, .length_len_om3 =1, + .addr_len_om4 =0x50, .page_len_om4 =0, .offset_len_om4 =146, .length_len_om4 =1, + .addr_option =0x50, .page_option =0, .offset_option =193, .length_option =3, + .addr_rate_id =-1, .page_rate_id =-1, .offset_rate_id =-1, .length_rate_id =-1, + .addr_rx_am =0x50, .page_rx_am =3, .offset_rx_am =238, .length_rx_am =2, + .addr_rx_em =0x50, .page_rx_em =3, .offset_rx_em =236, .length_rx_em =2, + .addr_rx_los =0x50, .page_rx_los =-1, .offset_rx_los =3, .length_rx_los =1, + .addr_rx_power =0x50, .page_rx_power =-1, .offset_rx_power =34, .length_rx_power =8, + .addr_soft_rs0 =-1, .page_soft_rs0 =-1, .offset_soft_rs0 =-1, .length_soft_rs0 =-1, + .addr_soft_rs1 =-1, .page_soft_rs1 =-1, .offset_soft_rs1 =-1, .length_soft_rs0 =-1, + .addr_temp =0x50, .page_temp =-1, .offset_temp =22, .length_temp =2, + .addr_trancomp =0x50, .page_trancomp =0, .offset_trancomp =131, .length_trancomp =8, + .addr_trancomp_ext =0x50, .page_trancomp_ext =0, .offset_trancomp_ext =192, .length_trancomp_ext =1, + .addr_tx_bias =0x50, .page_tx_bias =-1, .offset_tx_bias =42, .length_tx_bias =8, + .addr_tx_disable =0x50, .page_tx_disable =-1, .offset_tx_disable =86, .length_tx_disable =1, + .addr_tx_eq =0x50, .page_tx_eq =3, .offset_tx_eq =234, .length_tx_eq =2, + .addr_tx_fault =0x50, .page_tx_fault =-1, .offset_tx_fault =4, .length_tx_fault =1, + .addr_tx_power =0x50, .page_tx_power =-1, .offset_tx_power =50, .length_tx_power =8, + .addr_vendor_name =0x50, .page_vendor_name =0, .offset_vendor_name =148, .length_vendor_name =16, + .addr_vendor_pn =0x50, .page_vendor_pn =0, .offset_vendor_pn =168, .length_vendor_pn =16, + .addr_vendor_rev =0x50, .page_vendor_rev =0, .offset_vendor_rev =184, .length_vendor_rev =2, + .addr_vendor_sn =0x50, .page_vendor_sn =0, .offset_vendor_sn =196, .length_vendor_sn =16, + .addr_voltage =0x50, .page_voltage =-1, .offset_voltage =26, .length_voltage =2, + .addr_wavelength =0x50, .page_wavelength =0, .offset_wavelength =186, .length_wavelength =2, +}; + + +/* ========== Utility Functions ========== + */ +static int +get_bit(uint8_t origin_byte, int bit_shift) { + return (int)((origin_byte >> bit_shift) & 0x1); +} + +static int +transform_word_to_int(uint8_t hight_byte, + uint8_t low_byte) { + return ((((int)hight_byte) << 8) + (int)low_byte); +} + +void +alarm_msg_2_user(struct transvr_obj_s *self, + char *emsg) { + + SWPS_ERR("%s on %s.\n", emsg, self->swp_name); +} + + +/* ========== Private functions ========== + */ +static int +_reload_transvr_obj(struct transvr_obj_s *self,int new_type); + +static int +reload_transvr_obj(struct transvr_obj_s *self,int new_type); + +static int +_is_transvr_support_ctle(struct transvr_obj_s *self); + +static int +_transvr_init_handler(struct transvr_obj_s *self); + +int +_transvr_clean_handler(struct transvr_obj_s *self); + +int +_sfp_detect_class_by_1g_ethernet(struct transvr_obj_s* self); + + +void +lock_transvr_obj(struct transvr_obj_s *self) { + + mutex_lock(&self->lock); + self->curr_page = VAL_TRANSVR_PAGE_FREE; +} + + +void +unlock_transvr_obj(struct transvr_obj_s *self) { + + self->curr_page = VAL_TRANSVR_PAGE_FREE; + mutex_unlock(&self->lock); +} + + +static int +_check_by_mode(struct transvr_obj_s *self, + int (*attr_update_func)(struct transvr_obj_s *self, int show_err), + char *caller_name){ + + int return_val = ERR_TRANSVR_UNEXCPT; + + switch (self->mode){ + case TRANSVR_MODE_POLLING: + switch (self->state){ + case STATE_TRANSVR_CONNECTED: + goto ok_check_by_mode_1; + case STATE_TRANSVR_NEW: + case STATE_TRANSVR_INIT: + return ERR_TRANSVR_UNINIT; + case STATE_TRANSVR_DISCONNECTED: + return ERR_TRANSVR_UNPLUGGED; + case STATE_TRANSVR_UNEXCEPTED: + return ERR_TRANSVR_ABNORMAL; + case STATE_TRANSVR_ISOLATED: + return ERR_TRNASVR_BE_ISOLATED; + default: + goto err_check_by_mode_1; + } + goto ok_check_by_mode_1; + + case TRANSVR_MODE_DIRECT: + return_val = self->fsm_4_direct(self, caller_name); + if (return_val < 0){ + return return_val; + } + goto ok_check_by_mode_1; + + default: + goto err_check_by_mode_1; + } + goto ok_check_by_mode_1; + +ok_check_by_mode_1: + return attr_update_func(self, 0); + +err_check_by_mode_1: + SWPS_INFO("_check_by_mode: mode:%d state:%d\n", self->mode, self->state); + return ERR_TRANSVR_UNEXCPT; +} + + +static void +_transvr_clean_retry(struct transvr_obj_s *self) { + self->retry = 0; +} + + +static int +_transvr_handle_retry(struct transvr_obj_s *self, int retry) { + /* Return: 0: keep retry + * -1: stop retry + */ + if (self->retry == 0) { + self->retry = retry; + } + self->retry -= 1; + if (self->retry <= 0) { + _transvr_clean_retry(self); + return -1; + } + return 0; +} + + +static int +_common_setup_page(struct transvr_obj_s *self, + int addr, + int page, + int offset, + int len, + int show_e) { + /* return: + * 0 : OK + * -1 : EEPROM settings incorrect + * -2 : I2C R/W failure + * -3 : Undefined case + */ + int retval = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + + /* Check */ + if ((addr < 0) || (offset < 0) || (len < 0)) { + emsg = "EEPROM settings incorrect"; + retval = -1; + goto err_common_setup_page; + } + /* Case1: continue access */ + if ((self->i2c_client_p->addr == addr) && + (self->curr_page == page)) { + return 0; + } + self->i2c_client_p->addr = addr; + /* Case2: select lower page */ + if (page == -1) { + self->curr_page = page; + return 0; + } + /* Case3: select upper page */ + if (page >= 0) { + goto upper_common_setup_page; + } + /* Unexpected case */ + show_e = 1; + emsg = "Unexpected case"; + retval = -3; + goto err_common_setup_page; + +upper_common_setup_page: + if (i2c_smbus_write_byte_data(self->i2c_client_p, + VAL_TRANSVR_PAGE_SELECT_OFFSET, + page) < 0) { + emsg = "I2C R/W failure"; + retval = -2; + goto err_common_setup_page; + } + self->curr_page = page; + mdelay(VAL_TRANSVR_PAGE_SELECT_DELAY); + return 0; + +err_common_setup_page: + if (show_e) { + SWPS_INFO("%s: %s", __func__, emsg); + SWPS_INFO("%s: :0x%02x :%d :%d :%d\n", + __func__, addr, page, offset, len); + } + return retval; +} + +/* +static int +_common_setup_password(struct transvr_obj_s *self, + int addr, + int page, + int offs, + uint8_t pwd[4], + int show_e) { + int i = 0; + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + + err = _common_setup_page(self, addr, page, offs, 4, show_e); + if (err < 0){ + emsg = "setup EEPROM page fail"; + goto err_common_setup_password; + } + for (i=0; i<4; i++) { + err = i2c_smbus_write_byte_data(self->i2c_client_p, + (offs + i), + pwd[i]); + if (err < 0){ + emsg = "I2C R/W fail!"; + goto err_common_setup_password; + } + } + return 0; + +err_common_setup_password: + if (show_e) { + SWPS_INFO("%s: %s :%d\n", __func__, emsg, err); + } + return ERR_TRANSVR_UPDATE_FAIL; +} +*/ + +static int +_common_update_uint8_attr(struct transvr_obj_s *self, + int addr, + int page, + int offset, + int len, + uint8_t *buf, + char *caller, + int show_e){ + + int i; + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + + err = _common_setup_page(self, addr, page, offset, len, show_e); + if (err < 0){ + emsg = "setup EEPROM page fail"; + goto err_common_update_uint8_attr; + } + for (i=0; ii2c_client_p, (offset + i)); + if (err < 0){ + emsg = "I2C R/W fail!"; + goto err_common_update_uint8_attr; + } + buf[i] = err; + } + return 0; + +err_common_update_uint8_attr: + if (show_e) { + SWPS_INFO("%s: %s :%s :%d\n", + __func__, emsg, caller, err); + } + buf[0] = DEBUG_TRANSVR_HEX_VAL; + return ERR_TRANSVR_UPDATE_FAIL; +} + + +static int +_common_update_int_attr(struct transvr_obj_s *self, + int addr, + int page, + int offset, + int len, + int *buf, + char *caller, + int show_e){ + + int i; + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + + err = _common_setup_page(self, addr, page, offset, len, show_e); + if (err < 0){ + emsg = "setup EEPROM page fail"; + goto err_common_update_int_attr; + } + for (i=0; ii2c_client_p, (offset + i)); + if (err < 0){ + emsg = "I2C R/W fail!"; + goto err_common_update_int_attr; + } + buf[i] = (int)err; + } + return 0; + +err_common_update_int_attr: + if (show_e) { + SWPS_INFO("%s: %s :%s :%d\n", + __func__, emsg, caller, err); + } + buf[0] = DEBUG_TRANSVR_INT_VAL; + return ERR_TRANSVR_UPDATE_FAIL; +} + + +static int +_common_update_string_attr(struct transvr_obj_s *self, + int addr, + int page, + int offset, + int len, + char buf[], + char *caller, + int show_e){ + + int i; + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + + err = _common_setup_page(self, addr, page, offset, len, show_e); + if (err < 0){ + emsg = "setup EEPROM page fail"; + goto err_common_update_string_attr; + } + for (i=0; ii2c_client_p, (offset + i)); + if (err < 0){ + emsg = "I2C R/W fail!"; + goto err_common_update_string_attr; + } + buf[i] = (char)err; + } + return 0; + +err_common_update_string_attr: + if (show_e) { + SWPS_INFO("%s: %s :%s :%d\n", + __func__, emsg, caller, err); + } + buf[0] = 'e'; + return ERR_TRANSVR_UPDATE_FAIL; +} + + +static int +_common_set_uint8_attr(struct transvr_obj_s *self, + int addr, + int page, + int offset, + uint8_t update, + uint8_t *buf, + char *caller, + int show_e){ + int len = 1; + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + + if ((*buf) == update){ + return 0; + } + err = _common_setup_page(self, addr, page, offset, len, show_e); + if (err < 0){ + emsg = "setup EEPROM page fail"; + goto err_common_set_uint8_attr_1; + } + err = i2c_smbus_write_byte_data(self->i2c_client_p, + offset, + update); + if (err < 0){ + emsg = "I2C R/W fail!"; + goto err_common_set_uint8_attr_1; + } + (*buf) = update; + return 0; + +err_common_set_uint8_attr_1: + if (show_e) { + SWPS_INFO("%s: %s :%s :%d\n", + __func__, emsg, caller, err); + } + return ERR_TRANSVR_UPDATE_FAIL; +} + + +static int +_common_set_uint8_array(struct transvr_obj_s *self, + int addr, + int page, + int offs, + int len, + uint8_t update[], + uint8_t buf[], + char *caller, + int show_e){ + int i = 0; + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + + err = _common_setup_page(self, addr, page, offs, len, show_e); + if (err < 0){ + emsg = "setup EEPROM page fail"; + goto err_common_set_uint8_attr_1; + } + for (i=0; ii2c_client_p, + (offs + i), + update[i]); + if (err < 0){ + emsg = "I2C R/W fail!"; + goto err_common_set_uint8_attr_1; + } + buf[i] = update[i]; + } + return 0; + +err_common_set_uint8_attr_1: + if (show_e) { + SWPS_INFO("%s: %s :%s :%d :%d\n", + __func__, emsg, caller, err, i); + } + return ERR_TRANSVR_UPDATE_FAIL; +} + + +static int +_common_update_attr_id(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_id, + self->eeprom_map_p->page_id, + self->eeprom_map_p->offset_id, + self->eeprom_map_p->length_id, + &(self->id), + "_common_update_attr_id", + show_err); +} + + +static int +_common_update_attr_extended_id(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_ext_id, + self->eeprom_map_p->page_ext_id, + self->eeprom_map_p->offset_ext_id, + self->eeprom_map_p->length_ext_id, + &(self->ext_id), + "_common_update_attr_extended_id", + show_err); +} + + +static int +_common_update_attr_connector(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_connector, + self->eeprom_map_p->page_connector, + self->eeprom_map_p->offset_connector, + self->eeprom_map_p->length_connector, + &(self->connector), + "_common_update_attr_connector", + show_err); +} + + +static int +_common_update_attr_transvr_comp(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_trancomp, + self->eeprom_map_p->page_trancomp, + self->eeprom_map_p->offset_trancomp, + self->eeprom_map_p->length_trancomp, + self->transvr_comp, + "_common_update_attr_transvr_comp", + show_err); +} + + +static int +_common_update_attr_transvr_comp_ext(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_trancomp_ext, + self->eeprom_map_p->page_trancomp_ext, + self->eeprom_map_p->offset_trancomp_ext, + self->eeprom_map_p->length_trancomp_ext, + &(self->transvr_comp_ext), + "_common_update_attr_transvr_comp_ext", + show_err); +} + + +static int +_common_update_attr_vendor_name(struct transvr_obj_s *self, + int show_err){ + return _common_update_string_attr(self, + self->eeprom_map_p->addr_vendor_name, + self->eeprom_map_p->page_vendor_name, + self->eeprom_map_p->offset_vendor_name, + self->eeprom_map_p->length_vendor_name, + self->vendor_name, + "_common_update_attr_vendor_name", + show_err); +} + + +static int +_common_update_attr_vendor_pn(struct transvr_obj_s *self, + int show_err){ + return _common_update_string_attr(self, + self->eeprom_map_p->addr_vendor_pn, + self->eeprom_map_p->page_vendor_pn, + self->eeprom_map_p->offset_vendor_pn, + self->eeprom_map_p->length_vendor_pn, + self->vendor_pn, + "_common_update_attr_vendor_pn", + show_err); +} + + +static int +_common_update_attr_vendor_rev(struct transvr_obj_s *self, + int show_err){ + return _common_update_string_attr(self, + self->eeprom_map_p->addr_vendor_rev, + self->eeprom_map_p->page_vendor_rev, + self->eeprom_map_p->offset_vendor_rev, + self->eeprom_map_p->length_vendor_rev, + self->vendor_rev, + "_common_update_attr_vendor_rev", + show_err); +} + + +static int +_common_update_attr_vendor_sn(struct transvr_obj_s *self, + int show_err){ + return _common_update_string_attr(self, + self->eeprom_map_p->addr_vendor_sn, + self->eeprom_map_p->page_vendor_sn, + self->eeprom_map_p->offset_vendor_sn, + self->eeprom_map_p->length_vendor_sn, + self->vendor_sn, + "_common_update_attr_vendor_sn", + show_err); +} + + +static int +_common_update_attr_br(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_br, + self->eeprom_map_p->page_br, + self->eeprom_map_p->offset_br, + self->eeprom_map_p->length_br, + &(self->br), + "_common_update_attr_br", + show_err); +} + + +static int +_common_update_attr_len_smf(struct transvr_obj_s *self, + int show_err){ + return _common_update_int_attr(self, + self->eeprom_map_p->addr_len_smf, + self->eeprom_map_p->page_len_smf, + self->eeprom_map_p->offset_len_smf, + self->eeprom_map_p->length_len_smf, + &(self->len_smf), + "_common_update_attr_len_smf", + show_err); +} + + +static int +_common_update_attr_len_om1(struct transvr_obj_s *self, + int show_err){ + return _common_update_int_attr(self, + self->eeprom_map_p->addr_len_om1, + self->eeprom_map_p->page_len_om1, + self->eeprom_map_p->offset_len_om1, + self->eeprom_map_p->length_len_om1, + &(self->len_om1), + "_common_update_attr_len_om1", + show_err); +} + +static int +_common_update_attr_len_om2(struct transvr_obj_s *self, + int show_err){ + return _common_update_int_attr(self, + self->eeprom_map_p->addr_len_om2, + self->eeprom_map_p->page_len_om2, + self->eeprom_map_p->offset_len_om2, + self->eeprom_map_p->length_len_om2, + &(self->len_om2), + "_common_update_attr_len_om2", + show_err); +} + +static int +_common_update_attr_len_om3(struct transvr_obj_s *self, + int show_err){ + return _common_update_int_attr(self, + self->eeprom_map_p->addr_len_om3, + self->eeprom_map_p->page_len_om3, + self->eeprom_map_p->offset_len_om3, + self->eeprom_map_p->length_len_om3, + &(self->len_om3), + "_common_update_attr_len_om3", + show_err); +} + + +static int +_common_update_attr_len_om4(struct transvr_obj_s *self, + int show_err){ + return _common_update_int_attr(self, + self->eeprom_map_p->addr_len_om4, + self->eeprom_map_p->page_len_om4, + self->eeprom_map_p->offset_len_om4, + self->eeprom_map_p->length_len_om4, + &(self->len_om4), + "_common_update_attr_len_om4", + show_err); +} + + +static int +_common_update_attr_option(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_option, + self->eeprom_map_p->page_option, + self->eeprom_map_p->offset_option, + self->eeprom_map_p->length_option, + self->option, + "_common_update_attr_option", + show_err); +} + + +static int +_common_update_attr_comp_rev(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_comp_rev, + self->eeprom_map_p->page_comp_rev, + self->eeprom_map_p->offset_comp_rev, + self->eeprom_map_p->length_comp_rev, + &(self->comp_rev), + "_common_update_attr_comp_rev", + show_err); +} + + +static int +_common_update_attr_diag_type(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_diag_type, + self->eeprom_map_p->page_diag_type, + self->eeprom_map_p->offset_diag_type, + self->eeprom_map_p->length_diag_type, + &(self->diag_type), + "_common_update_attr_diag_type", + show_err); +} + + +static int +_common_update_attr_wavelength(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_wavelength, + self->eeprom_map_p->page_wavelength, + self->eeprom_map_p->offset_wavelength, + self->eeprom_map_p->length_wavelength, + self->wavelength, + "_common_update_attr_wavelength", + show_err); +} + + +int +_common_get_option_value(struct transvr_obj_s *self, + int offset, + int bit_shift) { + /* SFP: + * - option[0] = A0h / 64 + * - option[1] = A0h / 65 + * QSFP: + * - option[0] = 00h / 193 + * - option[1] = 00h / 194 + * - option[2] = 00h / 195 + */ + return (self->option[offset] & (1 << bit_shift)); +} + + +static int +_sfp_update_attr_len_sm(struct transvr_obj_s *self, + int show_err){ + return _common_update_int_attr(self, + self->eeprom_map_p->addr_len_sm, + self->eeprom_map_p->page_len_sm, + self->eeprom_map_p->offset_len_sm, + self->eeprom_map_p->length_len_sm, + &(self->len_sm), + "_common_update_attr_len_sm", + show_err); +} + + +static int +_sfp_update_attr_rate_id(struct transvr_obj_s *self, + int show_err){ + return _common_update_int_attr(self, + self->eeprom_map_p->addr_rate_id, + self->eeprom_map_p->page_rate_id, + self->eeprom_map_p->offset_rate_id, + self->eeprom_map_p->length_rate_id, + &(self->rate_id), + "_sfp_update_attr_rate_id", + show_err); +} + + +static int +_sfp_update_attr_soft_rs0(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_soft_rs0, + self->eeprom_map_p->page_soft_rs0, + self->eeprom_map_p->offset_soft_rs0, + self->eeprom_map_p->length_soft_rs0, + &(self->soft_rs0), + "_sfp_update_attr_soft_rs0", + show_err); +} + + +static int +_sfp_update_attr_soft_rs1(struct transvr_obj_s *self, + int show_err){ + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_soft_rs1, + self->eeprom_map_p->page_soft_rs1, + self->eeprom_map_p->offset_soft_rs1, + self->eeprom_map_p->length_soft_rs1, + &(self->soft_rs1), + "_sfp_update_attr_soft_rs1", + show_err); +} + + +int +_sfp_is_diag_support(struct transvr_obj_s *self){ + + uint8_t bit_mask = 0xC0; /* 1100 0000 */ + uint8_t en_val = 0x40; /* 0100 0000 */ + uint8_t checkval = (self->diag_type & bit_mask); + + if (checkval == en_val) { + return 1; + } + return 0; +} + + +static int +_sfp_update_attr_curr_temp(struct transvr_obj_s *self, + int show_err){ + + if (!(_sfp_is_diag_support(self))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_temp, + self->eeprom_map_p->page_temp, + self->eeprom_map_p->offset_temp, + self->eeprom_map_p->length_temp, + self->curr_temp, + "_sfp_update_attr_curr_temp", + show_err); +} + + +static int +_sfp_update_attr_curr_voltage(struct transvr_obj_s *self, + int show_err){ + + if (!(_sfp_is_diag_support(self))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_voltage, + self->eeprom_map_p->page_voltage, + self->eeprom_map_p->offset_voltage, + self->eeprom_map_p->length_voltage, + self->curr_voltage, + "_sfp_update_attr_curr_voltage", + show_err); +} + + +static int +_sfp_update_attr_curr_tx_bias(struct transvr_obj_s *self, + int show_err){ + + if (!(_sfp_is_diag_support(self))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_tx_bias, + self->eeprom_map_p->page_tx_bias, + self->eeprom_map_p->offset_tx_bias, + self->eeprom_map_p->length_tx_bias, + self->curr_tx_bias, + "_sfp_update_attr_curr_tx_bias", + show_err); +} + + +static int +_sfp_update_attr_curr_tx_power(struct transvr_obj_s *self, + int show_err){ + + if (!(_sfp_is_diag_support(self))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_tx_power, + self->eeprom_map_p->page_tx_power, + self->eeprom_map_p->offset_tx_power, + self->eeprom_map_p->length_tx_power, + self->curr_tx_power, + "_sfp_update_attr_curr_tx_power", + show_err); +} + + +static int +_sfp_update_attr_curr_rx_power(struct transvr_obj_s *self, + int show_err){ + + if (!(_sfp_is_diag_support(self))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_rx_power, + self->eeprom_map_p->page_rx_power, + self->eeprom_map_p->offset_rx_power, + self->eeprom_map_p->length_rx_power, + self->curr_rx_power, + "_sfp_update_attr_curr_rx_power", + show_err); +} + + +static int +_sfp_update_attr_rx_em(struct transvr_obj_s *self, + int show_err){ + + if (!_is_transvr_support_ctle(self)) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_rx_em, + self->eeprom_map_p->page_rx_em, + self->eeprom_map_p->offset_rx_em, + self->eeprom_map_p->length_rx_em, + self->rx_em, + "_sfp_update_attr_rx_em", + show_err); +} + + +static int +_sfp_update_attr_tx_eq(struct transvr_obj_s *self, + int show_err){ + + if (!_is_transvr_support_ctle(self)) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_tx_eq, + self->eeprom_map_p->page_tx_eq, + self->eeprom_map_p->offset_tx_eq, + self->eeprom_map_p->length_tx_eq, + self->tx_eq, + "_sfp_update_attr_tx_eq", + show_err); +} + + +static int +_qsfp_update_attr_cdr(struct transvr_obj_s *self, + int show_err){ + if (self->type != TRANSVR_TYPE_QSFP_28){ + self->cdr = DEBUG_TRANSVR_HEX_VAL; + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_cdr, + self->eeprom_map_p->page_cdr, + self->eeprom_map_p->offset_cdr, + self->eeprom_map_p->length_cdr, + &(self->cdr), + "_common_update_attr_cdr", + show_err); +} + + +static int +_qsfg_update_attr_extbr(struct transvr_obj_s *self, + int show_err) { + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_extbr, + self->eeprom_map_p->page_extbr, + self->eeprom_map_p->offset_extbr, + self->eeprom_map_p->length_extbr, + &(self->extbr), + "_common_update_attr_extbr", + show_err); +} + + +static int +_qsfp_is_diag_support(struct transvr_obj_s *self, + int diag_type) { + /* Input Parm: diag_type + * => 1 : temperature + * => 2 : voltage + * => 3 : tx relate + * => 4 : rx relate + */ + uint8_t mask_b2 = 0x04; /* 0000 0100 */ + uint8_t mask_b3 = 0x08; /* 0000 1000 */ + + switch (diag_type) { + case 1: /* temperature */ + case 2: /* voltage */ + /* Direct access target, because of spec not defined */ + return 1; + case 3: + case 4: + /* [Note] + * Due to lot of transceiver vendor defined it not rigorously and + * consider of general support, we seem it as supported if there + * are bit-2 OR bit-3 defined by transceiver vendor. + */ + if ( ((self->diag_type & mask_b2) == mask_b2 ) || + ((self->diag_type & mask_b3) == mask_b3 ) ){ + return 1; + } + return 0; + default: + SWPS_INFO("%s: undefined diag_type:%d\n", + __func__, diag_type); + break; + } + return 0; +} + + +int +_qsfp_is_implement_tx_disable(struct transvr_obj_s *self) { + /* + * 00h / Byte-195 / Bit-4 + */ + int byte = 2; + int bit = 4; + return _common_get_option_value(self, byte, bit); +} + + +int +_qsfp_is_implement_tx_fault(struct transvr_obj_s *self) { + /* + * 00h / Byte-195 / Bit-3 + */ + int byte = 2; + int bit = 3; + return _common_get_option_value(self, byte, bit); +} + + +static int +_qsfp_update_attr_curr_temp(struct transvr_obj_s *self, + int show_err){ + int diag_type = 1; + + if (!(_qsfp_is_diag_support(self, diag_type))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_temp, + self->eeprom_map_p->page_temp, + self->eeprom_map_p->offset_temp, + self->eeprom_map_p->length_temp, + self->curr_temp, + "_qsfp_update_attr_curr_temp", + show_err); +} + + +static int +_qsfp_update_attr_curr_voltage(struct transvr_obj_s *self, + int show_err){ + int diag_type = 2; + + if (!(_qsfp_is_diag_support(self, diag_type))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_voltage, + self->eeprom_map_p->page_voltage, + self->eeprom_map_p->offset_voltage, + self->eeprom_map_p->length_voltage, + self->curr_voltage, + "_qsfp_update_attr_curr_voltage", + show_err); +} + + +static int +_qsfp_update_attr_curr_tx_bias(struct transvr_obj_s *self, + int show_err){ + int diag_type = 3; + + if (!(_qsfp_is_diag_support(self, diag_type))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_tx_bias, + self->eeprom_map_p->page_tx_bias, + self->eeprom_map_p->offset_tx_bias, + self->eeprom_map_p->length_tx_bias, + self->curr_tx_bias, + "_qsfp_update_attr_curr_tx_bias", + show_err); +} + + +static int +_qsfp_update_attr_curr_tx_power(struct transvr_obj_s *self, + int show_err){ + int diag_type = 3; + + if (!(_qsfp_is_diag_support(self, diag_type))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_tx_power, + self->eeprom_map_p->page_tx_power, + self->eeprom_map_p->offset_tx_power, + self->eeprom_map_p->length_tx_power, + self->curr_tx_power, + "_qsfp_update_attr_curr_tx_power", + show_err); +} + + +static int +_qsfp_update_attr_curr_rx_power(struct transvr_obj_s *self, + int show_err){ + int diag_type = 4; + + if (!(_qsfp_is_diag_support(self, diag_type))) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_rx_power, + self->eeprom_map_p->page_rx_power, + self->eeprom_map_p->offset_rx_power, + self->eeprom_map_p->length_rx_power, + self->curr_rx_power, + "_qsfp_update_attr_curr_rx_power", + show_err); +} + + +static int +_qsfp_update_attr_soft_rx_los(struct transvr_obj_s *self, + int show_err){ + + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_rx_los, + self->eeprom_map_p->page_rx_los, + self->eeprom_map_p->offset_rx_los, + self->eeprom_map_p->length_rx_los, + &(self->rx_los), + "_qsfp_update_attr_soft_rx_los", + show_err); +} + + +static int +_qsfp_update_attr_soft_tx_disable(struct transvr_obj_s *self, + int show_err){ + + if (!_qsfp_is_implement_tx_disable(self)) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_tx_disable, + self->eeprom_map_p->page_tx_disable, + self->eeprom_map_p->offset_tx_disable, + self->eeprom_map_p->length_tx_disable, + &(self->tx_disable), + "_qsfp_update_attr_soft_tx_disable", + show_err); +} + + +static int +_qsfp_update_attr_soft_tx_fault(struct transvr_obj_s *self, + int show_err){ + + if (!_qsfp_is_implement_tx_fault(self)) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_tx_fault, + self->eeprom_map_p->page_tx_fault, + self->eeprom_map_p->offset_tx_fault, + self->eeprom_map_p->length_tx_fault, + &(self->tx_fault), + "_qsfp_update_attr_soft_tx_fault", + show_err); +} + + +static int +_qsfp_update_attr_tx_eq(struct transvr_obj_s *self, + int show_err){ + + if (!_is_transvr_support_ctle(self)) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_tx_eq, + self->eeprom_map_p->page_tx_eq, + self->eeprom_map_p->offset_tx_eq, + self->eeprom_map_p->length_tx_eq, + self->tx_eq, + "_qsfp_update_attr_tx_eq", + show_err); +} + + +static int +_qsfp_update_attr_rx_am(struct transvr_obj_s *self, + int show_err){ + + if (!_is_transvr_support_ctle(self)) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_rx_am, + self->eeprom_map_p->page_rx_am, + self->eeprom_map_p->offset_rx_am, + self->eeprom_map_p->length_rx_am, + self->rx_am, + "_qsfp_update_attr_rx_am", + show_err); +} + + +static int +_qsfp_update_attr_rx_em(struct transvr_obj_s *self, + int show_err){ + + if (!_is_transvr_support_ctle(self)) { + return ERR_TRANSVR_NOTSUPPORT; + } + return _common_update_uint8_attr(self, + self->eeprom_map_p->addr_rx_em, + self->eeprom_map_p->page_rx_em, + self->eeprom_map_p->offset_rx_em, + self->eeprom_map_p->length_rx_em, + self->rx_em, + "_qsfp_update_attr_rx_em", + show_err); +} + + +int +_common_update_attr_all(struct transvr_obj_s *self, + int show_err){ + + char *err_str = "err"; + + if (_common_update_attr_id(self, show_err) < 0) { + err_str = "_common_update_attr_id"; + goto err_common_update_attr_all; + } + if (_common_update_attr_extended_id(self, show_err) < 0) { + err_str = "_common_update_attr_extended_id"; + goto err_common_update_attr_all; + } + if (_common_update_attr_connector(self, show_err) < 0) { + err_str = "_common_update_attr_connector"; + goto err_common_update_attr_all; + } + if (_common_update_attr_transvr_comp(self, show_err) < 0) { + err_str = "_common_update_attr_transvr_comp"; + goto err_common_update_attr_all; + } + if (_common_update_attr_transvr_comp_ext(self, show_err) < 0) { + err_str = "_common_update_attr_transvr_comp_ext"; + goto err_common_update_attr_all; + } + if (_common_update_attr_vendor_name(self, show_err) < 0) { + err_str = "_common_update_attr_vendor_name"; + goto err_common_update_attr_all; + } + if (_common_update_attr_vendor_pn(self, show_err) < 0) { + err_str = "_common_update_attr_vendor_pn"; + goto err_common_update_attr_all; + } + if (_common_update_attr_vendor_rev(self, show_err) < 0) { + err_str = "_common_update_attr_vendor_rev"; + goto err_common_update_attr_all; + } + if (_common_update_attr_vendor_sn(self, show_err) < 0) { + err_str = "_common_update_attr_vendor_sn"; + goto err_common_update_attr_all; + } + if (_common_update_attr_br(self, show_err) < 0) { + err_str = "_common_update_attr_br"; + goto err_common_update_attr_all; + } + if (_common_update_attr_len_smf(self, show_err) < 0) { + err_str = "_common_update_attr_len_smf"; + goto err_common_update_attr_all; + } + if (_common_update_attr_len_om1(self, show_err) < 0) { + err_str = "_common_update_attr_len_om1"; + goto err_common_update_attr_all; + } + if (_common_update_attr_len_om2(self, show_err) < 0) { + err_str = "_common_update_attr_len_om2"; + goto err_common_update_attr_all; + } + if (_common_update_attr_len_om3(self, show_err) < 0) { + err_str = "_common_update_attr_len_om3"; + goto err_common_update_attr_all; + } + if (_common_update_attr_len_om4(self, show_err) < 0) { + err_str = "_common_update_attr_len_om4"; + goto err_common_update_attr_all; + } + if (_common_update_attr_option(self, show_err) < 0) { + err_str = "_common_update_attr_option"; + goto err_common_update_attr_all; + } + if (_common_update_attr_comp_rev(self, show_err) < 0) { + err_str = "_common_update_attr_comp_rev"; + goto err_common_update_attr_all; + } + if (_common_update_attr_diag_type(self, show_err) < 0) { + err_str = "_common_update_attr_diag_type"; + goto err_common_update_attr_all; + } + if (_common_update_attr_wavelength(self, show_err) < 0) { + err_str = "_common_update_attr_wavelength"; + goto err_common_update_attr_all; + } + return 0; + +err_common_update_attr_all: + if (show_err){ + SWPS_INFO("%s: fail at:%s :%s\n", __func__, err_str, self->swp_name); + } + return -1; +} + + +int +_sfp_update_attr_all(struct transvr_obj_s *self, + int show_err){ + + char *err_str = DEBUG_TRANSVR_STR_VAL; + + if (_common_update_attr_all(self, show_err) < 0){ + err_str = "_common_update_attr_all"; + goto err_sfp_update_attr_all; + } + if (_sfp_update_attr_len_sm(self, show_err) < 0) { + err_str = "_sfp_update_attr_len_sm"; + goto err_sfp_update_attr_all; + } + if (_sfp_update_attr_rate_id(self, show_err) < 0) { + err_str = "_sfp_update_attr_rate_id"; + goto err_sfp_update_attr_all; + } + if ((self->rate_id) > 0) { + if (_sfp_update_attr_soft_rs0(self, show_err) < 0) { + err_str = "_sfp_update_attr_soft_rs0"; + goto err_sfp_update_attr_all; + } + if (_sfp_update_attr_soft_rs1(self, show_err) < 0) { + err_str = "_sfp_update_attr_soft_rs1"; + goto err_sfp_update_attr_all; + } + } + return 0; + +err_sfp_update_attr_all: + if (show_err){ + SWPS_INFO("%s: fail at:%s :%s\n", __func__, err_str, self->swp_name); + } + return -1; +} + + +int +_qsfp_update_attr_all(struct transvr_obj_s *self, + int show_err){ + + char *err_str = DEBUG_TRANSVR_STR_VAL; + + if (_common_update_attr_all(self, show_err) < 0){ + err_str = "_common_update_attr_all"; + goto err_qsfp_update_attr_all; + } + if (_qsfg_update_attr_extbr(self, show_err) < 0) { + err_str = "_qsfg_update_attr_extbr"; + goto err_qsfp_update_attr_all; + } + if (self->type == TRANSVR_TYPE_QSFP_28) { + if (_qsfp_update_attr_cdr(self, 1) < 0) { + err_str = "_qsfp_update_attr_cdr"; + goto err_qsfp_update_attr_all; + } + } + return 0; + +err_qsfp_update_attr_all: + if (show_err){ + SWPS_INFO("%s: fail at:%s :%s\n", __func__, err_str, self->swp_name); + } + return -1; +} + + +/* ========== Object functions for common type ========== + */ +int +_common_count_temp(uint8_t high_byte, + uint8_t low_byte, + char *buf_p) { + int sign = 0; + int high = 0; + int low = 0; + int lmax = 8; + + /* Count high */ + sign = get_bit(high_byte,7); + SWP_BIT_CLEAR(high_byte, 7); + high = (int)high_byte; + if (sign == 1) { + high = 0 - high; + } + /* Count low */ + low = (get_bit(low_byte, 7) * 500); + low += (get_bit(low_byte, 6) * 250); + low += (get_bit(low_byte, 5) * 125); + low += (get_bit(low_byte, 4) * 62); + low = (low / 100); + /* Integrate High and Low */ + return snprintf(buf_p, lmax, "%d.%d\n", high, low); +} + + +int +_common_count_voltage(uint8_t high_byte, + uint8_t low_byte, + char *buf_p) { + /* [Note]: + * Internally measured transceiver supply voltage. Represented + * as a 16 bit unsigned integer with the voltage defined as the + * full 16 bit value (0-65535) with LSB equal to 100 uVolt, + * yielding a total range of 0 to +6.55 Volts. Practical + * considerations to be defined by transceiver manufacturer will + * tend to limit the actual bounds of the supply voltage measurement. + * Accuracy is vendor specific but must be better than 3% of the + * manufacturer's nominal value over specified operating temperature + * and voltage. Note that in some transceivers, transmitter supply + * voltage and receiver supply voltage are isolated. In that case, + * only one supply is monitored. Refer to the device specification + * for more detail. + */ + int total = 0; + int lmax = 8; + int val_i = 0; + int val_f = 0; + /* unit: 100 uV (1mV=1000uV) */ + total = transform_word_to_int(high_byte, low_byte); + val_i = ((total/10) / 1000); + val_f = ((total/10) - (val_i*1000)); + /* Return Unit: 1 Volt */ + return snprintf(buf_p, lmax, "%d.%03d\n", val_i, val_f); +} + + +int +_common_count_tx_bias(uint8_t high_byte, + uint8_t low_byte, + char *buf_p) { + /* [Note] + * Measured TX bias current in uA. Represented as a 16 bit unsigned + * integer with the current defined as the full 16 bit value (0-65535) + * with LSB equal to 2 uA, yielding a total range of 0 to 131 mA. + * Accuracy is vendor specific but must be better than 10% of the + * manufacturer's nominal value over specified operating temperature + * and voltage. + */ + int total = 0; + int lmax = 8; + int val_i = 0; + int val_f = 0; + /* unit: 2 uA (1mA=1000uA) */ + total = transform_word_to_int(high_byte, low_byte); + val_i = ((total*2) / 1000); + val_f = (((total*2) - (val_i*1000)) / 100); + /* Return Unit: 1 mA */ + return snprintf(buf_p, lmax, "%d.%01d\n", val_i, val_f); +} + + +int +_common_count_tx_power(uint8_t high_byte, + uint8_t low_byte, + char *buf_p) { + /* [Note] + * Measured TX output power in mW. Represented as a 16 bit unsigned + * integer with the power defined as the full 16 bit value (0-65535) + * with LSB equal to 0.1 uW, yielding a total range of 0 to 6.5535 mW + * (~ -40 to +8.2 dBm). Data is assumed to be based on measurement of + * laser monitor photodiode current. It is factory calibrated to absolute + * units using the most representative fiber output type. Accuracy is + * vendor specific but must be better than 3dB over specified temperature + * and voltage. Data is not valid when the transmitter is disabled. + */ + int total = 0; + int lmax = 8; + int val_i = 0; + int val_f = 0; + /* unit: 0.1 uW (1mW=1000uW) */ + total = transform_word_to_int(high_byte, low_byte); + val_i = ((total/10) / 1000); + val_f = ((total/10) - (val_i*1000)); + /* Return Unit: 1 mW */ + return snprintf(buf_p, lmax, "%d.%03d\n", val_i, val_f); +} + + +int +_common_count_rx_power(uint8_t high_byte, + uint8_t low_byte, + char *buf_p) { + /* [Note] + * Measured RX received optical power in mW. Value can represent either + * average received power or OMA depending upon how bit 3 of byte 92 (A0h) + * is set. Represented as a 16 bit unsigned integer with the power defined + * as the full 16 bit value (0-65535) with LSB equal to 0.1 uW, yielding a + * total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm). Absolute accuracy is + * dependent upon the exact optical wavelength. For the vendor specified + * wavelength, accuracy shall be better than 3dB over specified temperature + * and voltage. + */ + int total = 0; + int lmax = 8; + int val_i = 0; + int val_f = 0; + /* unit: 0.1 uW (1mW=1000uW) */ + total = transform_word_to_int(high_byte, low_byte); + val_i = ((total/10) / 1000); + val_f = ((total/10) - (val_i*1000)); + /* Return Unit: 1 mW */ + return snprintf(buf_p, lmax, "%d.%03d\n", val_i, val_f); +} + + +int +_common_count_wavelength(struct transvr_obj_s *self, + uint8_t high_byte, + uint8_t low_byte) { + /* [Note] + * SFP : uint 1 um. + * QSFP: unit 0.05 um. + */ + int total = 0; + + total = transform_word_to_int(high_byte, low_byte); + switch (self->type) { + case TRANSVR_TYPE_SFP: + return total; + + case TRANSVR_TYPE_QSFP: + case TRANSVR_TYPE_QSFP_PLUS: + case TRANSVR_TYPE_QSFP_28: + return (total/20); + + default: + break; + } + return ERR_TRANSVR_UNDEFINED; +} + + +int +common_get_id(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_common_update_attr_id, + "common_get_id"); + if (err_code < 0){ + return err_code; + } + /* Transform to INT to show error case */ + return (int)self->id; +} + + +int +common_get_ext_id(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_common_update_attr_extended_id, + "common_get_ext_id"); + if (err_code < 0){ + return err_code; + } + /* Transform to INT to show error case */ + return (int)self->ext_id; +} + + +int +common_get_connector(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_common_update_attr_connector, + "common_get_connector"); + if (err_code < 0){ + return err_code; + } + /* Transform to INT to show error case */ + return (int)self->connector; +} + + +int +common_get_vendor_name(struct transvr_obj_s *self, char *buf){ + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return snprintf(buf, LEN_TRANSVR_M_STR, "%s\n", self->vendor_name); + } + err = _check_by_mode(self, + &_common_update_attr_vendor_name, + "common_get_vendor_name"); + memset(buf, 0, LEN_TRANSVR_M_STR); + if (err < 0){ + return snprintf(buf, LEN_TRANSVR_M_STR, "%d\n", err); + } + return snprintf(buf, LEN_TRANSVR_M_STR, "%s\n", self->vendor_name); +} + + +int +common_get_vendor_pn(struct transvr_obj_s *self, char *buf) { + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return snprintf(buf, LEN_TRANSVR_M_STR, "%s\n", self->vendor_pn); + } + err = _check_by_mode(self, + &_common_update_attr_vendor_pn, + "common_get_vendor_pn"); + memset(buf, 0, LEN_TRANSVR_M_STR); + if (err < 0){ + return snprintf(buf, LEN_TRANSVR_M_STR, "%d\n", err); + } + return snprintf(buf, LEN_TRANSVR_M_STR, "%s\n", self->vendor_pn); +} + + +int +common_get_vendor_rev(struct transvr_obj_s *self, char *buf) { + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return snprintf(buf, LEN_TRANSVR_M_STR, "%s\n", self->vendor_rev); + } + err = _check_by_mode(self, + &_common_update_attr_vendor_rev, + "common_get_vendor_rev"); + memset(buf, 0, LEN_TRANSVR_M_STR); + if (err < 0){ + return snprintf(buf, LEN_TRANSVR_M_STR, "%d\n", err); + } + return snprintf(buf, LEN_TRANSVR_M_STR, "%s\n", self->vendor_rev); +} + + +int +common_get_vendor_sn(struct transvr_obj_s *self, char *buf) { + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return snprintf(buf, LEN_TRANSVR_M_STR, "%s\n", self->vendor_sn); + } + err = _check_by_mode(self, + &_common_update_attr_vendor_sn, + "common_get_vendor_sn"); + memset(buf, 0, LEN_TRANSVR_M_STR); + if (err < 0){ + return snprintf(buf, LEN_TRANSVR_M_STR, "%d\n", err); + } + return snprintf(buf, LEN_TRANSVR_M_STR, "%s\n", self->vendor_sn); +} + + +int +common_get_br(struct transvr_obj_s *self){ + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return (int)self->br; + } + err = _check_by_mode(self, + &_common_update_attr_br, + "common_get_br"); + if (err < 0){ + return err; + } + /* Transform to INT to show error case */ + return (int)self->br; +} + + +int +common_get_len_smf(struct transvr_obj_s *self){ + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return self->len_smf; + } + err = _check_by_mode(self, + &_common_update_attr_len_smf, + "common_get_len_smf"); + if (err < 0){ + return err; + } + return self->len_smf; +} + + +int +common_get_len_om1(struct transvr_obj_s *self){ + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return self->len_om1; + } + err = _check_by_mode(self, + &_common_update_attr_len_om1, + "common_get_len_om1"); + if (err < 0){ + return err; + } + return self->len_om1; +} + + +int +common_get_len_om2(struct transvr_obj_s *self){ + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return self->len_om2; + } + + err = _check_by_mode(self, + &_common_update_attr_len_om2, + "common_get_len_om2"); + if (err < 0){ + return err; + } + return self->len_om2; +} + + +int +common_get_len_om3(struct transvr_obj_s *self){ + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return self->len_om3; + } + + err = _check_by_mode(self, + &_common_update_attr_len_om3, + "common_get_len_om3"); + if (err < 0){ + return err; + } + return self->len_om3; +} + + +int +common_get_len_om4(struct transvr_obj_s *self){ + + int err = DEBUG_TRANSVR_INT_VAL; + + if (self->state == STATE_TRANSVR_CONNECTED && + self->mode == TRANSVR_MODE_POLLING && + TRANSVR_INFO_CACHE_ENABLE) { + return self->len_om4; + } + err = _check_by_mode(self, + &_common_update_attr_len_om4, + "common_get_len_om4"); + if (err < 0){ + return err; + } + return self->len_om4; +} + + +int +common_get_comp_extended(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_common_update_attr_transvr_comp_ext, + "common_get_comp_extended"); + if (err_code < 0){ + return err_code; + } + return self->transvr_comp_ext; +} + + +int +common_get_comp_rev(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_common_update_attr_comp_rev, + "common_get_comp_rev"); + if (err_code < 0){ + return err_code; + } + return self->comp_rev; +} + + +int +common_get_info(struct transvr_obj_s *self){ + + if (self->state != STATE_TRANSVR_CONNECTED) { + return self->state; + } + return self->info; +} + + +int +_common_get_if_lane(struct transvr_obj_s *self, + char *result){ + int i = 0; + int tmp_val = 0; + char tmp_str[LEN_TRANSVR_M_STR] = DEBUG_TRANSVR_STR_VAL; + + memset(result, 0, LEN_TRANSVR_M_STR); + + for (i=0; ilane_id); i++) { + tmp_val = self->lane_id[i]; + if (tmp_val < 1) { + break; + } + memset(tmp_str, 0, LEN_TRANSVR_M_STR); + if (i == 0) { + snprintf(tmp_str, LEN_TRANSVR_M_STR, "%d", tmp_val); + } else { + snprintf(tmp_str, LEN_TRANSVR_M_STR, ",%d", tmp_val); + } + strncat(result, tmp_str, LEN_TRANSVR_M_STR); + } + if (i == 0) { + return EVENT_TRANSVR_TASK_FAIL; + } + return 0; +} + + +int +common_get_if_lane(struct transvr_obj_s *self, + char *buf_p){ + + char tmp_str[LEN_TRANSVR_M_STR] = DEBUG_TRANSVR_STR_VAL; + + if (self->ioexp_obj_p->state != STATE_IOEXP_NORMAL) { + return snprintf(buf_p, LEN_TRANSVR_M_STR, "%d\n", ERR_TRANSVR_ABNORMAL); + } + if (_common_get_if_lane(self, tmp_str) < 0) { + return snprintf(buf_p, LEN_TRANSVR_M_STR, "%d\n" ,ERR_TRANSVR_ABNORMAL); + } + return snprintf(buf_p, LEN_TRANSVR_M_STR, "%s\n" ,tmp_str); +} + + +int +sfp_get_len_sm(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_sfp_update_attr_len_sm, + "sfp_get_len_sm"); + if (err_code < 0){ + return err_code; + } + return self->len_sm; +} + + +int +sfp_get_rate_id(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_sfp_update_attr_rate_id, + "sfp_get_rate_id"); + if (err_code < 0){ + return err_code; + } + return self->rate_id; +} + + +int +sfp_get_soft_rs0(struct transvr_obj_s *self){ + /* Note: + * SFP Soft Rate_Select Select [aka. "RS(0)"] address + * A2h, offset: 110, bit 3 (begin form 0) + */ + int err_code = DEBUG_TRANSVR_INT_VAL; + int bit_shift = 3; + uint8_t result = 0x00; + uint8_t bitmask = (1 << bit_shift); + + /* Check rate identifier is supported */ + err_code = self->get_rate_id(self); + if (err_code <= 0) { + return ERR_TRANSVR_NOTSUPPORT; + } + /* Update and check */ + err_code = _check_by_mode(self, + &_sfp_update_attr_soft_rs0, + "sfp_get_soft_rs0"); + if (err_code <0){ + return err_code; + } + result = (self->soft_rs0 & bitmask); + if (result == bitmask) { + return 1; + } + if (result == 0) { + return 0; + } + return ERR_TRANSVR_UNEXCPT; +} + + +int +sfp_get_soft_rs1(struct transvr_obj_s *self){ + /* Note: + * SFP Soft RS(1) Select address + * A2h, offset: 118, bit 3 (begin form 0) + */ + int err_code = DEBUG_TRANSVR_INT_VAL; + int bit_shift = 3; + uint8_t result = 0x00; + uint8_t bitmask = (1 << bit_shift); + + /* Check rate identifier is supported */ + err_code = self->get_rate_id(self); + if (err_code <= 0) { + return ERR_TRANSVR_NOTSUPPORT; + } + /* Update and check */ + err_code = _check_by_mode(self, + &_sfp_update_attr_soft_rs1, + "sfp_get_soft_rs1"); + if (err_code <0){ + return err_code; + } + result = (self->soft_rs1 & bitmask); + if (result == bitmask) { + return 1; + } + if (result == 0) { + return 0; + } + return ERR_TRANSVR_UNEXCPT; +} + + +int +sfp_get_transvr_temp(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_sfp_update_attr_curr_temp, + "sfp_get_transvr_temp"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_temp[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + return _common_count_temp(self->curr_temp[0], + self->curr_temp[1], + buf_p); +} + + +int +sfp_get_transvr_voltage(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_sfp_update_attr_curr_voltage, + "sfp_get_transvr_voltage"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_voltage[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* Return Unit: 1 Volt */ + return _common_count_voltage(self->curr_voltage[0], + self->curr_voltage[1], + buf_p); +} + + +int +sfp_get_transvr_tx_bias(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_sfp_update_attr_curr_tx_bias, + "sfp_get_transvr_tx_bias"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_tx_bias[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* Return Unit: 1 mA */ + return _common_count_tx_bias(self->curr_tx_bias[0], + self->curr_tx_bias[1], + buf_p); +} + + +int +sfp_get_transvr_tx_power(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_sfp_update_attr_curr_tx_power, + "sfp_get_transvr_tx_power"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_tx_bias[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* Return Unit: 1 mW */ + return _common_count_tx_power(self->curr_tx_power[0], + self->curr_tx_power[1], + buf_p); +} + + +int +sfp_get_transvr_rx_power(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_sfp_update_attr_curr_rx_power, + "sfp_get_transvr_rx_power"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_tx_bias[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* Return Unit: 1 mW */ + return _common_count_rx_power(self->curr_rx_power[0], + self->curr_rx_power[0], + buf_p); +} + + +int +sfp_get_transvr_rx_em(struct transvr_obj_s *self, + char *buf_p) { + + int limt = 8; + int err = DEBUG_TRANSVR_INT_VAL; + + err = _check_by_mode(self, + &_sfp_update_attr_rx_em, + "sfp_get_transvr_rx_em"); + if (err < 0) { + return snprintf(buf_p, limt, "%d\n", err); + } + if ((self->tx_eq[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, limt, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + return snprintf(buf_p, limt, "0x%02x\n", self->rx_em[0]); +} + + +int +sfp_get_transvr_tx_eq(struct transvr_obj_s *self, + char *buf_p) { + + int limt = 8; + int err = DEBUG_TRANSVR_INT_VAL; + + err = _check_by_mode(self, + &_sfp_update_attr_tx_eq, + "sfp_get_transvr_tx_eq"); + if (err < 0) { + return snprintf(buf_p, limt, "%d\n", err); + } + if ((self->tx_eq[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, limt, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + return snprintf(buf_p, limt, "0x%02x\n", self->tx_eq[0]); +} + + +int +_sfp_get_comp_extended(struct transvr_obj_s *self) { + /* Address: A0h / 36 + * Reference: SFF-8024 TABLE 4-4 + */ + if ((self->state == STATE_TRANSVR_CONNECTED) || + (self->state == STATE_TRANSVR_INIT) ) { + return (int)(self->transvr_comp_ext); + } + return ERR_TRANSVR_ABNORMAL; +} + + +int +__sfp_get_comp_attr(struct transvr_obj_s *self, + int array_offset) { + /* SFP Specification Compliance: A0h / 3-10 + * transvr_comp[0-7] = 3 - 10 + */ + if ((self->state == STATE_TRANSVR_CONNECTED) || + (self->state == STATE_TRANSVR_INIT) ) { + return (int)(self->transvr_comp[array_offset]); + } + return ERR_TRANSVR_ABNORMAL; +} + + +int +_sfp_get_comp_10g_eth_comp(struct transvr_obj_s *self) { + /* transvr_comp[0] = address A0h / 3 + * + * 3 7: 10G Base-ER + * 3 6: 10GBASE-LRM + * 3 5: 10GBASE-LR + * 3 4: 10GBASE-SR + */ + int bitmask = 0xf0; /* 11110000 */ + return (__sfp_get_comp_attr(self, 0) & bitmask); +} + + +int +_sfp_get_comp_1g_eth_comp(struct transvr_obj_s *self) { + /* transvr_comp[3] = address A0h / 6 + * + * 6 7: BASE-PX *3 + * 6 6: BASE-BX10 *3 + * 6 5: 100BASE-FX + * 6 4: 100BASE-LX/LX10 + * 6 3: 1000BASE-T + * 6 2: 1000BASE-CX + * 6 1: 1000BASE-LX *3 + * 6 0: 1000BASE-SX + */ + return __sfp_get_comp_attr(self, 3); +} + + +int +_sfp_get_cable_tech(struct transvr_obj_s *self) { + /* transvr_comp[5] = address A0h / 8 + * + * 8 3: Active Cable *8 + * 8 2: Passive Cable *8 + */ + int bitmask = 0x0c; /* 00001100 */ + return (__sfp_get_comp_attr(self, 5) & bitmask); +} + + +int +sfp_get_comp_eth_1(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_common_update_attr_transvr_comp, + "sfp_get_comp_eth_1"); + if (err_code < 0){ + return err_code; + } + return _sfp_get_comp_1g_eth_comp(self); +} + + +int +sfp_get_comp_eth_10(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_common_update_attr_transvr_comp, + "sfp_get_comp_eth_10"); + if (err_code < 0){ + return err_code; + } + return _sfp_get_comp_10g_eth_comp(self); +} + + +int +_sfp_get_connector_type(struct transvr_obj_s *self) { + /* Address: A0h / 2 + * Reference: SFF-8024 TABLE 4-3 + */ + if ((self->state == STATE_TRANSVR_CONNECTED) || + (self->state == STATE_TRANSVR_INIT) ) { + return (int)(self->connector); + } + return ERR_TRANSVR_ABNORMAL; +} + + +int +sfp_get_wavelength(struct transvr_obj_s *self, + char *buf_p) { + /* [Note] Optical and Cable Variants Specification Compliance (SFF-8472) + * [Addr] A0h, Bytes 60-61 + * [Note] For optical variants, as defined by having zero's in A0h Byte 8 + * bits 2 and 3, Bytes 60 and 61 denote nominal transmitter output + * wavelength at room temperature. 16 bit value with byte 60 as high + * order byte and byte 61 as low order byte. The laser wavelength is + * equal to the 16 bit integer value in nm. This field allows the user + * to read the laser wavelength directly, so it is not necessary to + * infer it from the Transceiver Codes A0h Bytes 3 to 10 (see Table + * 5-3). This also allows specification of wavelengths not covered + * in the Transceiver Codes, such as those used in coarse WDM systems. + * + * For passive and active cable variants, a value of 00h for both A0h + * Byte 60 and Byte 61 denotes laser wavelength or cable specification + * compliance is unspecified. + */ + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_common_update_attr_wavelength, + "common_get_wavelength"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->wavelength[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* unit: 1 um */ + return snprintf(buf_p, lmax, "%d\n", + _common_count_wavelength(self, + self->wavelength[0], + self->wavelength[1])); +} + + +int +__qsfp_get_power_cls(struct transvr_obj_s *self, + int direct_access){ + + int err_code; + uint8_t detect_val; + + /* Detect and Update power class attribute */ + if (direct_access){ + err_code = _check_by_mode(self, + &_common_update_attr_extended_id, + "__qsfp_get_power_cls"); + } else { + err_code = self->ext_id; + } + if (err_code <0){ + return err_code; + } + if (err_code == DEBUG_TRANSVR_HEX_VAL){ + return ERR_TRANSVR_UPDATE_FAIL; + } + /* Clean data */ + detect_val = self->ext_id; + SWP_BIT_CLEAR(detect_val, 2); /* Bit2: CDR RX present */ + SWP_BIT_CLEAR(detect_val, 3); /* Bit3: CDR TX present */ + SWP_BIT_CLEAR(detect_val, 4); /* Bit4: CLEI present */ + SWP_BIT_CLEAR(detect_val, 5); /* Bit5: reserved */ + /* Identify power class */ + switch (detect_val) { + case 0: /* Class_1: 00000000 */ + return 1; + case 64: /* Class_2: 01000000 */ + return 2; + case 128: /* Class_3: 10000000 */ + return 3; + case 192: /* Class_4: 11000000 */ + return 4; + case 1: /* Class_5: 00000001 */ + case 193: /* Class_5: 11000001 */ + return 5; + case 2: /* Class_6: 00000010 */ + case 194: /* Class_6: 11000010 */ + return 6; + case 3: /* Class_7: 00000011 */ + case 195: /* Class_7: 11000011 */ + return 7; + default: + break; + } + SWPS_INFO("%s: Detect undefined power class:%d\n", __func__, detect_val); + return ERR_TRANSVR_UNDEFINED; +} + + +int +qsfp_get_power_cls(struct transvr_obj_s *self) { + return __qsfp_get_power_cls(self, 1); +} + + +int +__qsfp_get_cdr_present(struct transvr_obj_s *self, + int direct_access){ + + int retval; + int BIT_SHIFT = 2; + int BIT_MASK = 0x3; + + /* Detect and Update power class attribute */ + if (direct_access) { + retval = _check_by_mode(self, + &_common_update_attr_extended_id, + "__qsfp_get_cdr_present"); + if (retval < 0){ + return retval; + } + } + retval = self->ext_id; + if (retval == DEBUG_TRANSVR_HEX_VAL){ + return ERR_TRANSVR_UPDATE_FAIL; + } + /* Clean data and return */ + return (int)(retval >> BIT_SHIFT & BIT_MASK); +} + + +int +qsfp_get_cdr_present(struct transvr_obj_s *self) { + return __qsfp_get_cdr_present(self, 1); +} + + +int +qsfp_get_cdr(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_qsfp_update_attr_cdr, + "qsfp_get_cdr"); + if (err_code <0){ + return err_code; + } + + return self->cdr; +} + + +int +__qsfp_get_comp_attr(struct transvr_obj_s *self, + int array_offset) { + /* QSFP Specification Compliance: 00h / 131-138 + * transvr_comp[0-7] = 131 - 138 + */ + if ((self->state == STATE_TRANSVR_CONNECTED) || + (self->state == STATE_TRANSVR_INIT) ) { + return (int)(self->transvr_comp[array_offset]); + } + return ERR_TRANSVR_ABNORMAL; +} + + +int +_qsfp_get_comp_10_40_100_ethernet(struct transvr_obj_s *self) { + /* transvr_comp[0] = address 00h / 131 + * + * 131 7: Extended: See section 6.3.23. The Extended Specification Compliance + * Codes are maintained in the Transceiver Management section of SFF- + * 8024. + * 131 6: 10GBASE-LRM + * 131 5: 10GBASE-LR + * 131 4: 10GBASE-SR + * 131 3: 40GBASE-CR4 + * 131 2: 40GBASE-SR4 + * 131 1: 40GBASE-LR4 + * 131 0: 40G Active Cable (XLPPI) + */ + return __qsfp_get_comp_attr(self, 0); +} + + +int +_qsfp_get_comp_sonet(struct transvr_obj_s *self) { + /* transvr_comp[1] = address 00h / 132 + * + * 132 7-3: Reserved + * 132 2: OC 48, long reach + * 132 1: OC 48, intermediate reach + * 132 0: OC 48 short reach + */ + return __qsfp_get_comp_attr(self, 1); +} + + +int +_qsfp_get_comp_sas_sata(struct transvr_obj_s *self) { + /* transvr_comp[1] = address 00h / 132 + * + * 133 7: SAS 24.0 Gb/s + * 133 6: SAS 12.0 Gb/s + * 133 5: SAS 6.0 Gb/s + * 133 4: SAS 3.0 Gb/s + * 133 3-0: Reserved + */ + return __qsfp_get_comp_attr(self, 2); +} + + +int +_qsfp_get_comp_ethernet(struct transvr_obj_s *self) { + /* transvr_comp[1] = address 00h / 132 + * + * 134 7-4: Reserved + * 134 3: 1000BASE-T + * 134 2: 1000BASE-CX + * 134 1: 1000BASE-LX + * 134 0: 1000BASE-SX + */ + return __qsfp_get_comp_attr(self, 3); +} + + +int +_qsfp_get_comp_fc_link_length(struct transvr_obj_s *self) { + /* transvr_comp[1] = address 00h / 132 + * + * 135 7: Very long distance (V) + * 135 6: Short distance (S) + * 135 5: Intermediate distance (I) + * 135 4: Long distance (L) + * 135 3: Medium (M) + */ + int mask = 0xFC; /* 11111100 */ + return (__qsfp_get_comp_attr(self, 4) & mask); +} + + +int +_qsfp_get_comp_fc_trans_tech(struct transvr_obj_s *self) { + /* transvr_comp[1] = address 00h / 132 + * + * 135 2: Reserved + * 135 1: Longwave laser (LC) + * 135 0: Electrical inter-enclosure (EL) + * + * 136 7: Electrical intra-enclosure + * 136 6: Shortwave laser w/o OFC (SN) + * 136 5: Shortwave laser w OFC (SL) + * 136 4: Longwave Laser (LL) + * 136 3-0: Reserved + * + * return value = [bit 8-15:addr 135][bit 0-7:addr 136] + */ + int mask_135 = 7; /* 00000111 */ + int val_135 = (__qsfp_get_comp_attr(self, 4) & mask_135); + int val_136 = __qsfp_get_comp_attr(self, 5); + return ((val_135 << 7) + val_136); +} + + +int +_qsfp_get_comp_fc_trans_media(struct transvr_obj_s *self) { + /* transvr_comp[1] = address 00h / 132 + * + * 137 7: Twin Axial Pair (TW) + * 137 6: Shielded Twisted Pair (TP) + * 137 5: Miniature Coax (MI) + * 137 4: Video Coax (TV) + * 137 3: Multi-mode 62.5 m (M6) + * 137 2: Multi-mode 50 m (M5) + * 137 1: Multi-mode 50 um (OM3) + * 137 0: Single Mode (SM) + */ + return __qsfp_get_comp_attr(self, 6); +} + + +int +_qsfp_get_comp_fc_speed(struct transvr_obj_s *self) { + /* transvr_comp[1] = address 00h / 132 + * + * 138 7: 1200 MBps (per channel) + * 138 6: 800 MBps + * 138 5: 1600 MBps (per channel) + * 138 4: 400 MBps + * 138 3: 3200 MBps (per channel) + * 138 2: 200 MBps + * 138 1: Extended: See section 6.3.23. The Extended Specification + * Compliance Codes are maintained in the Transceiver Management + * section of SFF-8024. + * 138 0: 100 MBps + */ + return __qsfp_get_comp_attr(self, 7); +} + + +int +_qsfp_get_comp_extended(struct transvr_obj_s *self) { + /* Address: 00h / 192 + * Reference: SFF-8024 TABLE 4-4 + */ + if ((self->state == STATE_TRANSVR_CONNECTED) || + (self->state == STATE_TRANSVR_INIT) ) { + return (int)(self->transvr_comp_ext); + } + return ERR_TRANSVR_ABNORMAL; +} + + +int +qsfp_get_comp_eth(struct transvr_obj_s *self){ + + int err_code = _check_by_mode(self, + &_common_update_attr_transvr_comp, + "qsfp_get_comp_eth"); + if (err_code < 0){ + return err_code; + } + return _qsfp_get_comp_ethernet(self); +} + + +int +qsfp_get_comp_10_40(struct transvr_obj_s *self) { + + int err_code = _check_by_mode(self, + &_common_update_attr_transvr_comp, + "qsfp_get_comp_10_40"); + if (err_code < 0){ + return err_code; + } + return _qsfp_get_comp_10_40_100_ethernet(self); +} + + +int +_qsfp_get_connector_type(struct transvr_obj_s *self) { + /* Address: 00h / 130 + * Reference: SFF-8024 TABLE 4-3 + */ + if ((self->state == STATE_TRANSVR_CONNECTED) || + (self->state == STATE_TRANSVR_INIT) ) { + return (int)(self->connector); + } + return ERR_TRANSVR_ABNORMAL; +} + + +int +qsfp_get_transvr_temp(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_qsfp_update_attr_curr_temp, + "qsfp_get_transvr_temp"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_temp[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + return _common_count_temp(self->curr_temp[0], + self->curr_temp[1], + buf_p); +} + + +int +qsfp_get_transvr_voltage(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_qsfp_update_attr_curr_voltage, + "qsfp_get_transvr_voltage"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_voltage[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* Return Unit: 1 Volt */ + return _common_count_voltage(self->curr_voltage[0], + self->curr_voltage[1], + buf_p); +} + + +int +qsfp_get_transvr_tx_eq(struct transvr_obj_s *self, + char *buf_p) { + + int limt = 8; + int err = DEBUG_TRANSVR_INT_VAL; + + err = _check_by_mode(self, + &_qsfp_update_attr_tx_eq, + "qsfp_get_transvr_tx_eq"); + if (err < 0) { + return snprintf(buf_p, limt, "%d\n", err); + } + if ((self->tx_eq[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, limt, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + return snprintf(buf_p, limt, "0x%02x%02x\n", + self->tx_eq[0], self->tx_eq[1]); +} + + +int +qsfp_get_transvr_rx_am(struct transvr_obj_s *self, + char *buf_p) { + + int limt = 8; + int err = DEBUG_TRANSVR_INT_VAL; + + err = _check_by_mode(self, + &_qsfp_update_attr_rx_am, + "qsfp_get_transvr_rx_am"); + if (err < 0) { + return snprintf(buf_p, limt, "%d\n", err); + } + if ((self->rx_am[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, limt, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + return snprintf(buf_p, limt, "0x%02x%02x\n", + self->rx_am[0], self->rx_am[1]); +} + + +int +qsfp_get_transvr_rx_em(struct transvr_obj_s *self, + char *buf_p) { + + int limt = 8; + int err = DEBUG_TRANSVR_INT_VAL; + + err = _check_by_mode(self, + &_qsfp_update_attr_rx_em, + "qsfp_get_transvr_rx_em"); + if (err < 0) { + return snprintf(buf_p, limt, "%d\n", err); + } + if ((self->rx_em[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, limt, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + return snprintf(buf_p, limt, "0x%02x%02x\n", + self->rx_em[0], self->rx_em[1]); +} + + +int +_qsfp_get_channel_diag(uint8_t *data_array, + int (*count_func)(uint8_t high_byte, uint8_t low_byte, char *buf_p), + char *ch_name, + char *result_p) { + int i, high, low; + int len_max = 128; + char ch_buf[4][16] = { DEBUG_TRANSVR_STR_VAL, + DEBUG_TRANSVR_STR_VAL, + DEBUG_TRANSVR_STR_VAL, + DEBUG_TRANSVR_STR_VAL }; + + for (i=0; i<4; i++) { + high = (i*2); + low = ((i*2) + 1); + count_func(data_array[high], data_array[low], ch_buf[i]); + } + return snprintf(result_p, len_max, + "%s-%d:%s%s-%d:%s%s-%d:%s%s-%d:%s", + ch_name, 1, ch_buf[0], + ch_name, 2, ch_buf[1], + ch_name, 3, ch_buf[2], + ch_name, 4, ch_buf[3]); +} + + +int +qsfp_get_soft_rx_los(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int mask = 0x0f; /* Bit 0 ~ Bit 3 */ + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_qsfp_update_attr_soft_rx_los, + "qsfp_get_soft_rx_los"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + return snprintf(buf_p, lmax, "0x%02x\n", (self->rx_los & mask)); +} + + +int +qsfp_get_soft_tx_disable(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int mask = 0x0f; /* Bit 0 ~ Bit 3 */ + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_qsfp_update_attr_soft_tx_disable, + "qsfp_get_soft_tx_disable"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + return snprintf(buf_p, lmax, "0x%02x\n", (self->tx_disable & mask)); +} + + +int +qsfp_get_soft_tx_fault(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int mask = 0x0f; /* Bit 0 ~ Bit 3 */ + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_qsfp_update_attr_soft_tx_fault, + "qsfp_get_soft_tx_fault"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + return snprintf(buf_p, lmax, "0x%02x\n", (self->tx_fault & mask)); +} + + +int +qsfp_get_auto_tx_disable(struct transvr_obj_s *self, + char *buf_p) { + + if (self->auto_tx_disable == VAL_TRANSVR_FUNCTION_DISABLE) { + return snprintf(buf_p, LEN_TRANSVR_S_STR, + "%d\n", ERR_TRANSVR_FUNC_DISABLE); + } + return snprintf(buf_p, LEN_TRANSVR_S_STR, + "0x%02x\n", self->auto_tx_disable); +} + + +int +qsfp_get_transvr_tx_bias(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + char *ch_name = "TX"; + + err_code = _check_by_mode(self, + &_qsfp_update_attr_curr_tx_bias, + "qsfp_get_transvr_tx_bias"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_tx_bias[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* Return Unit: 1 mA */ + return _qsfp_get_channel_diag(self->curr_tx_bias, + _common_count_tx_bias, + ch_name, + buf_p); +} + + +int +qsfp_get_transvr_tx_power(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + char *ch_name = "TX"; + + err_code = _check_by_mode(self, + &_qsfp_update_attr_curr_tx_power, + "qsfp_get_transvr_tx_power"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_tx_power[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* Return Unit: 1 mW */ + return _qsfp_get_channel_diag(self->curr_tx_power, + _common_count_tx_power, + ch_name, + buf_p); +} + + +int +qsfp_get_transvr_rx_power(struct transvr_obj_s *self, + char *buf_p) { + + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + char *ch_name = "RX"; + + err_code = _check_by_mode(self, + &_qsfp_update_attr_curr_rx_power, + "qsfp_get_transvr_rx_power"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->curr_tx_power[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* Return Unit: 1 mW */ + return _qsfp_get_channel_diag(self->curr_rx_power, + _common_count_rx_power, + ch_name, + buf_p); +} + + +int +qsfp_get_wavelength(struct transvr_obj_s *self, + char *buf_p) { + /* [Desc] Wavelength or Copper Cable Attenuation (SFF-8636) + * [Addr] 00h 186-187 + * [Note] + * For optical free side devices, this parameter identifies the nominal + * transmitter output wavelength at room temperature. This parameter is + * a 16-bit hex value with Byte 186 as high order byte and Byte 187 as + * low order byte. The laser wavelength is equal to the 16-bit integer value + * divided by 20 in nm (units of 0.05 nm). This resolution should be adequate + * to cover all relevant wavelengths yet provide enough resolution for all + * expected DWDM applications. For accurate representation of controlled + * wavelength applications, this value should represent the center of the + * guaranteed wavelength range. + * If the free side device is identified as copper cable these registers will + * be used to define the cable attenuation. An indication of 0 dB attenuation + * refers to the case where the attenuation is not known or is unavailable. + * Byte 186 (00-FFh) is the copper cable attenuation at 2.5 GHz in units of 1 dB. + * Byte 187 (00-FFh) is the copper cable attenuation at 5.0 GHz in units of 1 dB. + */ + int lmax = 8; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _check_by_mode(self, + &_common_update_attr_wavelength, + "common_get_wavelength"); + if (err_code < 0) { + return snprintf(buf_p, lmax, "%d\n", err_code); + } + if ((self->wavelength[0]) == DEBUG_TRANSVR_HEX_VAL) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_UPDATE_FAIL); + } + /* unit: 1 um */ + return snprintf(buf_p, lmax, "%d\n", + _common_count_wavelength(self, + self->wavelength[0], + self->wavelength[1])); +} + + +/* Public Function for Setup Features + */ +static int +__sfp_set_soft_rs(struct transvr_obj_s *self, + int input_val, + int address, + int page, + int offset, + int bit_shift, + uint8_t *attr_p, + char *caller, + int show_err) { + + int retval = ERR_TRANSVR_UNEXCPT; + int err_code = ERR_TRANSVR_UNEXCPT; + char *err_msg = DEBUG_TRANSVR_STR_VAL; + uint8_t update_val = (*attr_p); + + switch (input_val) { + case 0: + SWP_BIT_CLEAR(update_val, bit_shift); + break; + case 1: + SWP_BIT_SET(update_val, bit_shift); + break; + default: + retval = ERR_TRANSVR_UNEXCPT; + err_code = ERR_TRANSVR_UNEXCPT; + err_msg = "Exception occurs"; + goto err_private_sfp_set_soft_rs_1; + } + err_code = _common_set_uint8_attr(self, + address, + page, + offset, + update_val, + attr_p, + caller, + show_err); + if (err_code < 0) { + retval = err_code; + err_msg = "Write data via i2c fail!"; + goto err_private_sfp_set_soft_rs_1; + } + (*attr_p) = update_val; + return 0; + +err_private_sfp_set_soft_rs_1: + if (show_err) { + SWPS_INFO("%s: %s :%d :%s\n :%d\n", + __func__, err_msg, err_code, self->swp_name, input_val); + } + return retval; +} + + +static int +_sfp_set_soft_rs(struct transvr_obj_s *self, + int input_val, + int address, + int page, + int offset, + int bit_shift, + int (*attr_update_func)(struct transvr_obj_s *self, int show_err), + uint8_t *attr_p, + char *caller, + int show_err) { + + int retval = ERR_TRANSVR_UNEXCPT; + int err_code = ERR_TRANSVR_UNEXCPT; + char *err_msg = DEBUG_TRANSVR_STR_VAL; + + /* Check input value */ + if ((input_val != 0) && (input_val != 1)){ + retval = ERR_TRANSVR_BADINPUT; + err_code = ERR_TRANSVR_BADINPUT; + err_msg = "Input range incorrect!"; + goto err_common_sfp_set_soft_rs_1; + } + /* Check rate identifier is supported */ + err_code = self->get_rate_id(self); + if (err_code <= 0) { + switch (err_code) { + case 0: + retval = ERR_TRANSVR_NOTSUPPORT; + err_msg = "Not support this feature"; + break; + case ERR_TRANSVR_UNINIT: + retval = ERR_TRANSVR_UNINIT; + err_msg = "Check CDR present fail!"; + break; + case ERR_TRANSVR_UNPLUGGED: + retval = ERR_TRANSVR_UNPLUGGED; + err_msg = "Transceiver unplugged!"; + break; + default: + retval = err_code; + err_msg = "Check Rate_ID fail!"; + break; + } + goto err_common_sfp_set_soft_rs_1; + } + /* Check and update */ + err_code = _check_by_mode(self, + attr_update_func, + caller); + if ( (err_code < 0) || + ((*attr_p) == DEBUG_TRANSVR_HEX_VAL) ){ + retval = err_code; + err_msg = "Get current value fail!"; + goto err_common_sfp_set_soft_rs_1; + } + /* Generate and update value */ + return __sfp_set_soft_rs(self, + input_val, + address, + page, + offset, + bit_shift, + attr_p, + caller, + show_err); + +err_common_sfp_set_soft_rs_1: + if (show_err) { + SWPS_INFO("%s: %s :%d :%s\n :%d\n", + __func__, err_msg, err_code, self->swp_name, input_val); + } + return retval; +} + + +int +sfp_set_soft_rs0(struct transvr_obj_s *self, + int input_val) { + /* Note: + * SFP Soft Rate_Select Select RX ["RS(0)"] address + * A2h, offset: 110, bit 3 + */ + int bit_shift = 3; + int show_err = 1; + return _sfp_set_soft_rs(self, + input_val, + self->eeprom_map_p->addr_soft_rs0, + self->eeprom_map_p->page_soft_rs0, + self->eeprom_map_p->offset_soft_rs0, + bit_shift, + &_sfp_update_attr_soft_rs0, + &(self->soft_rs0), + "sfp_set_soft_rs0", + show_err); +} + + +int +sfp_set_soft_rs1(struct transvr_obj_s *self, + int input_val) { + /* Note: + * SFP Soft Rate_Select Select RX ["RS(1)"] address + * A2h, offset: 118, bit 3 + */ + int bit_shift = 3; + int show_err = 1; + return _sfp_set_soft_rs(self, + input_val, + self->eeprom_map_p->addr_soft_rs1, + self->eeprom_map_p->page_soft_rs1, + self->eeprom_map_p->offset_soft_rs1, + bit_shift, + &_sfp_update_attr_soft_rs1, + &(self->soft_rs1), + "sfp_set_soft_rs1", + show_err); +} + + +int +__sfp_set_tx_eq(struct transvr_obj_s *self, + int input, + int show_e) { + + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + uint8_t setv = DEBUG_TRANSVR_HEX_VAL; + + if ((input < 0) || (input > 0xFF)) { + emsg = "input incorrect"; + err = ERR_TRANSVR_BADINPUT; + goto err_sfp_set_tx_eq; + } + setv = (uint8_t)input; + if (self->tx_eq[0] == setv) { + return 0; + } + err = _common_set_uint8_attr(self, + self->eeprom_map_p->addr_tx_eq, + self->eeprom_map_p->page_tx_eq, + self->eeprom_map_p->offset_tx_eq, + setv, + &(self->tx_eq[0]), + "_sfp_set_tx_eq", + show_e); + if (err < 0) { + emsg = "set_uint8_attr fail"; + goto err_sfp_set_tx_eq; + } + return 0; + +err_sfp_set_tx_eq: + if (show_e) { + SWPS_INFO("%s: %s :%d\n", __func__, emsg, input); + } + return err; +} + + +int +_sfp_set_tx_eq(struct transvr_obj_s *self, + int input, + int show_e) { + + uint8_t tmp; + int i = 0; + int retry = 3; + + for (i=0; itx_eq[0]; + if (_sfp_update_attr_tx_eq(self, show_e) < 0){ + continue; + } + if (self->tx_eq[0] == tmp){ + return 0; + } + } + return ERR_TRANSVR_UPDATE_FAIL; +} + + +int +sfp_set_tx_eq(struct transvr_obj_s *self, + int input) { + + int err = _check_by_mode(self, + &_sfp_update_attr_tx_eq, + "sfp_set_tx_eq"); + if (err < 0) { + SWPS_DEBUG("%s: check fail :%d\n", __func__, err); + return err; + } + return _sfp_set_tx_eq(self, input, 1); +} + + +int +__sfp_set_rx_em(struct transvr_obj_s *self, + int input, + int show_e) { + + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + uint8_t setv = DEBUG_TRANSVR_HEX_VAL; + + if ((input < 0) || (input > 0xFF)) { + emsg = "input incorrect"; + err = ERR_TRANSVR_BADINPUT; + goto err_sfp_set_rx_em; + } + setv = (uint8_t)input; + if (self->rx_em[0] == setv) { + return 0; + } + err = _common_set_uint8_attr(self, + self->eeprom_map_p->addr_rx_em, + self->eeprom_map_p->page_rx_em, + self->eeprom_map_p->offset_rx_em, + setv, + &(self->rx_em[0]), + "_sfp_set_rx_em", + show_e); + if (err < 0) { + emsg = "set_uint8_attr fail"; + goto err_sfp_set_rx_em; + } + return 0; + +err_sfp_set_rx_em: + if (show_e) { + SWPS_INFO("%s: %s :%d\n", __func__, emsg, input); + } + return err; +} + + +int +_sfp_set_rx_em(struct transvr_obj_s *self, + int input, + int show_e) { + + uint8_t tmp; + int i = 0; + int retry = 3; + + for (i=0; irx_em[0]; + if (_sfp_update_attr_rx_em(self, show_e) < 0){ + continue; + } + if (self->rx_em[0] == tmp){ + return 0; + } + } + return -1; +} + + +int +sfp_set_rx_em(struct transvr_obj_s *self, + int input) { + + int err = _check_by_mode(self, + &_sfp_update_attr_rx_em, + "sfp_set_rx_em"); + if (err < 0) { + SWPS_DEBUG("%s: check fail :%d\n", __func__, err); + return err; + } + return _sfp_set_rx_em(self, input, 1); +} + + +static int +__qsfp_set_cdr(struct transvr_obj_s *self, + int input_val, + int show_err) { + + uint8_t update_val; + int CDR_FEATURE_SUPPORTED = 0x3; + int retval = ERR_TRANSVR_UNEXCPT; + int err_code = ERR_TRANSVR_UNEXCPT; + char *err_msg = DEBUG_TRANSVR_STR_VAL; + char *func_name = "__qsfp_set_cdr"; + + /* Check input value */ + if ((input_val < 0) || (input_val > 0xff)){ + retval = ERR_TRANSVR_BADINPUT; + err_code = ERR_TRANSVR_BADINPUT; + err_msg = "Input range incorrect!"; + goto err_qsfp_set_cdr_1; + } + update_val = (uint8_t)input_val; + /* Check CDR supported by transceiver */ + err_code = qsfp_get_cdr_present(self); + if (err_code < 0) { + retval = err_code; + switch (err_code) { + case ERR_TRANSVR_UNINIT: + err_msg = "Check CDR present fail!"; + break; + case ERR_TRANSVR_UNPLUGGED: + err_msg = "Transceiver unplugged!"; + break; + default: + err_msg = "Check CDR present fail!"; + break; + } + goto err_qsfp_set_cdr_1; + } + if (err_code != CDR_FEATURE_SUPPORTED) { + retval = ERR_TRANSVR_NOTSUPPORT; + err_msg = "This transceiver not support CDR!"; + goto err_qsfp_set_cdr_1; + } + /* Check and update */ + err_code = _check_by_mode(self, + &_qsfp_update_attr_cdr, + func_name); + if ( (err_code < 0) || + (self->cdr == DEBUG_TRANSVR_HEX_VAL) ){ + retval = err_code; + err_msg = "Get current value fail!"; + goto err_qsfp_set_cdr_1; + } + /* Write input value to transceiver */ + return _common_set_uint8_attr(self, + self->eeprom_map_p->addr_cdr, + self->eeprom_map_p->page_cdr, + self->eeprom_map_p->offset_cdr, + update_val, + &(self->cdr), + func_name, + show_err); + +err_qsfp_set_cdr_1: + if (show_err) { + SWPS_INFO("%s: %s :%d :%s\n :%d\n", + __func__, err_msg, err_code, self->swp_name, input_val); + } + return retval; +} + + +int +qsfp_set_cdr(struct transvr_obj_s *self, + int input_val) { + return __qsfp_set_cdr(self, input_val, 1); +} + + +int +qsfp_set_soft_tx_disable(struct transvr_obj_s *self, + int input_val) { + + int show_err = 1; + int in_max = 0xf; /* 1111 */ + int in_min = 0x0; /* 0000 */ + int retval = DEBUG_TRANSVR_INT_VAL; + int update_val = DEBUG_TRANSVR_INT_VAL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + retval = _check_by_mode(self, + &_qsfp_update_attr_soft_tx_disable, + "qsfp_set_soft_tx_disable"); + if (retval < 0) { + snprintf(err_msg, 63, "Not ready. err:%d", retval); + goto err_qsfp_set_soft_tx_disable; + } + if ((input_val > in_max) || + (input_val < in_min) ){ + retval = ERR_TRANSVR_BADINPUT; + snprintf(err_msg, 63, "Input value:%d incorrect!", input_val); + goto err_qsfp_set_soft_tx_disable; + } + if ((self->tx_disable & 0x0f) == input_val) { + return 0; + } + update_val = ((self->tx_disable & 0xf0) & input_val); + retval = _common_set_uint8_attr(self, + self->eeprom_map_p->addr_tx_disable, + self->eeprom_map_p->page_tx_disable, + self->eeprom_map_p->offset_tx_disable, + input_val, + &(self->tx_disable), + "qsfp_set_tx_disable", + show_err); + if (retval < 0) { + snprintf(err_msg, 63, "_common_set_uint8_attr:%d fail!", retval); + goto err_qsfp_set_soft_tx_disable; + } + return 0; + +err_qsfp_set_soft_tx_disable: + SWPS_INFO("%s: %s :%s\n", __func__, err_msg, self->swp_name); + return retval; +} + + +int +_qsfp_set_auto_tx_disable(struct transvr_obj_s *self, + uint8_t update) { + + uint8_t tx_enable = 0x0; + int show_e = 1; + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + + /* Handle timing issues */ + if (update != tx_enable) { + /* Note: + * Because there are some txvr has timing issues, + * therefore we need to execute reset cycle first. + * (enable -> other settings) + */ + err = _common_set_uint8_attr(self, + self->eeprom_map_p->addr_tx_disable, + self->eeprom_map_p->page_tx_disable, + self->eeprom_map_p->offset_tx_disable, + tx_enable, + &(self->tx_disable), + "_qsfp_set_auto_tx_disable", + show_e); + if (err < 0) { + emsg = "I2C set reset value fail"; + goto err_qsfp_set_auto_tx_disable; + } + mdelay(10); + } + /* Setup target value */ + err = _common_set_uint8_attr(self, + self->eeprom_map_p->addr_tx_disable, + self->eeprom_map_p->page_tx_disable, + self->eeprom_map_p->offset_tx_disable, + self->auto_tx_disable, + &(self->tx_disable), + "_qsfp_set_auto_tx_disable", + show_e); + if (err < 0) { + emsg = "I2C set target value fail"; + goto err_qsfp_set_auto_tx_disable; + } + /* Check and update */ + err = _common_update_uint8_attr(self, + self->eeprom_map_p->addr_tx_disable, + self->eeprom_map_p->page_tx_disable, + self->eeprom_map_p->offset_tx_disable, + self->eeprom_map_p->length_tx_disable, + &(self->tx_disable), + "_qsfp_set_auto_tx_disable", + show_e); + if (err < 0) { + emsg = "I2C get value fail"; + goto err_qsfp_set_auto_tx_disable; + } + if (self->tx_disable != update) { + emsg = "data not become effective"; + goto err_qsfp_set_auto_tx_disable; + } + return 0; + +err_qsfp_set_auto_tx_disable: + SWPS_DEBUG("%s: %s :%s\n", + __func__, emsg, self->swp_name); + return ERR_TRANSVR_UPDATE_FAIL; +} + + +int +qsfp_set_auto_tx_disable(struct transvr_obj_s *self, + int input_val) { + + int in_max = 0xf; /* 1111 */ + int in_min = 0x0; /* 0000 */ + int retval = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + + /* Update settings*/ + if (input_val == VAL_TRANSVR_FUNCTION_DISABLE) { + emsg = "User disable auto tx_disable"; + self->auto_tx_disable = VAL_TRANSVR_FUNCTION_DISABLE; + goto out_qsfp_set_auto_tx_disable; + } + if ((input_val > in_max) || (input_val < in_min) ){ + SWPS_INFO("%s: Input value:%d incorrect! :%s\n", + __func__, input_val, self->swp_name); + return ERR_TRANSVR_BADINPUT; + } + self->auto_tx_disable = input_val; + /* Check current soft tx_disable */ + retval = _check_by_mode(self, + &_qsfp_update_attr_soft_tx_disable, + "qsfp_set_auto_tx_disable"); + switch (retval) { + case 0: + break; + case ERR_TRANSVR_UNPLUGGED: + emsg = "Doesn't need to update"; + goto out_qsfp_set_auto_tx_disable; + default: + SWPS_INFO("%s: setup fail :%d :%s\n", + __func__, retval, self->swp_name); + return retval; + } + return _qsfp_set_auto_tx_disable(self, input_val); + +out_qsfp_set_auto_tx_disable: + SWPS_DEBUG("%s: %s :%s :%d\n :%d", + __func__, emsg, self->swp_name, input_val, retval); + return 0; +} + + +int +__qsfp_set_tx_eq(struct transvr_obj_s *self, + int input, + int show_e) { + /* [Note] + * 0x + */ + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + uint8_t setv[2] = {0x00, 0x00}; + + if ((input < 0) || (input > 0xFFFF)) { + emsg = "input incorrect"; + err = ERR_TRANSVR_BADINPUT; + goto err_qsfp_set_tx_eq; + } + setv[0] = (uint8_t)((input & 0xFF00) >> 8); + setv[1] = (uint8_t)(input & 0xFF); + if ((self->tx_eq[0] == setv[0]) && + (self->tx_eq[1] == setv[1]) ) { + return 0; + } + err = _common_set_uint8_array(self, + self->eeprom_map_p->addr_tx_eq, + self->eeprom_map_p->page_tx_eq, + self->eeprom_map_p->offset_tx_eq, + self->eeprom_map_p->length_tx_eq, + setv, + self->tx_eq, + "_qsfp_set_tx_eq", + show_e); + if (err < 0) { + emsg = "set_uint8_array fail"; + goto err_qsfp_set_tx_eq; + } + return 0; + +err_qsfp_set_tx_eq: + if (show_e) { + SWPS_INFO("%s: %s :%d\n", __func__, emsg, input); + } + return err; +} + + +int +_qsfp_set_tx_eq(struct transvr_obj_s *self, + int input, + int show_e) { + + int i = 0; + int retry = 3; + uint8_t tmp[2]; + + for (i=0; itx_eq[0]; + tmp[1] = self->tx_eq[1]; + if (_qsfp_update_attr_tx_eq(self, show_e) < 0){ + continue; + } + if ((self->tx_eq[0] == tmp[0]) && + (self->tx_eq[1] == tmp[1]) ){ + return 0; + } + } + return -1; +} + + +int +qsfp_set_tx_eq(struct transvr_obj_s *self, + int input) { + + int err = _check_by_mode(self, + &_qsfp_update_attr_tx_eq, + "qsfp_set_tx_eq"); + if (err < 0) { + SWPS_DEBUG("%s: check fail :%d\n", __func__, err); + return err; + } + return _qsfp_set_tx_eq(self, input, 1); +} + + +int +__qsfp_set_rx_am(struct transvr_obj_s *self, + int input, + int show_e) { + /* [Note] + * 0x + */ + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + uint8_t setv[2] = {0x00, 0x00}; + + if ((input < 0) || (input > 0xFFFF)) { + emsg = "input incorrect"; + err = ERR_TRANSVR_BADINPUT; + goto err_qsfp_set_rx_am; + } + setv[0] = (uint8_t)((input & 0xFF00) >> 8); + setv[1] = (uint8_t)(input & 0xFF); + if ((self->rx_am[0] == setv[0]) && + (self->rx_am[1] == setv[1]) ) { + return 0; + } + err = _common_set_uint8_array(self, + self->eeprom_map_p->addr_rx_am, + self->eeprom_map_p->page_rx_am, + self->eeprom_map_p->offset_rx_am, + self->eeprom_map_p->length_rx_am, + setv, + self->rx_am, + "_qsfp_set_rx_am", + show_e); + if (err < 0) { + emsg = "set_uint8_array fail"; + goto err_qsfp_set_rx_am; + } + return 0; + +err_qsfp_set_rx_am: + if (show_e) { + SWPS_INFO("%s: %s :%d\n", __func__, emsg, input); + } + return err; +} + + +int +_qsfp_set_rx_am(struct transvr_obj_s *self, + int input, + int show_e) { + + int i = 0; + int retry = 3; + uint8_t tmp[2]; + + for (i=0; irx_am[0]; + tmp[1] = self->rx_am[1]; + if (_qsfp_update_attr_rx_am(self, show_e) < 0){ + continue; + } + if ((self->rx_am[0] == tmp[0]) && + (self->rx_am[1] == tmp[1]) ){ + return 0; + } + } + return -1; +} + + +int +qsfp_set_rx_am(struct transvr_obj_s *self, + int input) { + + int err = _check_by_mode(self, + &_qsfp_update_attr_rx_am, + "qsfp_set_rx_am"); + if (err < 0) { + SWPS_DEBUG("%s: check fail :%d\n", __func__, err); + return err; + } + return _qsfp_set_rx_am(self, input, 1); +} + + +int +__qsfp_set_rx_em(struct transvr_obj_s *self, + int input, + int show_e) { + /* [Note] + * 0x + */ + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + uint8_t setv[2] = {0x00, 0x00}; + + if ((input < 0) || (input > 0xFFFF)) { + emsg = "input incorrect"; + err = ERR_TRANSVR_BADINPUT; + goto err_qsfp_set_rx_em; + } + setv[0] = (uint8_t)((input & 0xFF00) >> 8); + setv[1] = (uint8_t)(input & 0xFF); + if ((self->rx_em[0] == setv[0]) && + (self->rx_em[1] == setv[1]) ) { + return 0; + } + err = _common_set_uint8_array(self, + self->eeprom_map_p->addr_rx_em, + self->eeprom_map_p->page_rx_em, + self->eeprom_map_p->offset_rx_em, + self->eeprom_map_p->length_rx_em, + setv, + self->rx_em, + "_qsfp_set_rx_em", + show_e); + if (err < 0) { + emsg = "set_uint8_array fail"; + goto err_qsfp_set_rx_em; + } + return 0; + +err_qsfp_set_rx_em: + if (show_e) { + SWPS_INFO("%s: %s :%d\n", __func__, emsg, input); + } + return err; +} + + +int +_qsfp_set_rx_em(struct transvr_obj_s *self, + int input, + int show_e) { + + int i = 0; + int retry = 3; + uint8_t tmp[2]; + + for (i=0; irx_em[0]; + tmp[1] = self->rx_em[1]; + if (_qsfp_update_attr_rx_em(self, show_e) < 0){ + continue; + } + if ((self->rx_em[0] == tmp[0]) && + (self->rx_em[1] == tmp[1]) ){ + return 0; + } + } + return -1; +} + + +int +qsfp_set_rx_em(struct transvr_obj_s *self, + int input) { + + int err = _check_by_mode(self, + &_qsfp_update_attr_rx_em, + "qsfp_set_rx_em"); + if (err < 0) { + SWPS_DEBUG("%s: check fail :%d\n", __func__, err); + return err; + } + return _qsfp_set_rx_em(self, input, 1); +} + + +int +common_transvr_dump(struct transvr_obj_s* self){ + + char *type_name = "Undefined"; + + if (TRANSVR_INFO_DUMP_ENABLE != 1) { + return 0; + } + switch (self->type) { + case TRANSVR_TYPE_SFP: + type_name = STR_TRANSVR_SFP; + break; + case TRANSVR_TYPE_QSFP: + type_name = STR_TRANSVR_QSFP; + break; + case TRANSVR_TYPE_QSFP_PLUS: + type_name = STR_TRANSVR_QSFP_PLUS; + break; + case TRANSVR_TYPE_QSFP_28: + type_name = STR_TRANSVR_QSFP28; + break; + case TRANSVR_TYPE_FAKE: + type_name = "FAKE"; + goto ok_common_transvr_dump; + case TRANSVR_TYPE_UNPLUGGED: + type_name = "UNPLUGGED"; + goto err_common_transvr_dump; + case TRANSVR_TYPE_INCONSISTENT: + type_name = "INCONSISTENT"; + goto err_common_transvr_dump; + case TRANSVR_TYPE_ERROR: + type_name = "ERROR"; + goto err_common_transvr_dump; + + default: + type_name = "UNEXPECTED"; + goto err_common_transvr_dump; + } + printk(KERN_INFO "[SWPS] Dump %s information:\n", self->swp_name); + printk(KERN_INFO " |- :%s\n", type_name); + printk(KERN_INFO " |- :%s\n", self->vendor_name); + printk(KERN_INFO " |- :%s\n", self->vendor_pn); + printk(KERN_INFO " |- :%s\n", self->vendor_rev); + printk(KERN_INFO " |- :%s\n", self->vendor_sn); + printk(KERN_INFO " |- :0x%02x\n", self->br); + printk(KERN_INFO " |- :0x%02x\n", self->comp_rev); + printk(KERN_INFO " |- :%d\n", self->len_om1); + printk(KERN_INFO " |- :%d\n", self->len_om2); + printk(KERN_INFO " |- :%d\n", self->len_om3); + printk(KERN_INFO " |- :%d\n", self->len_om4); + return 0; + +ok_common_transvr_dump: + SWPS_INFO("%s: %s is %s\n", __func__, self->swp_name, type_name); + return 0; + +err_common_transvr_dump: + SWPS_INFO("%s: %s is %s\n", __func__, self->swp_name, type_name); + return -1; +} + + +int +sfp_transvr_dump(struct transvr_obj_s* self) { + + if (TRANSVR_INFO_DUMP_ENABLE != 1) { + return 0; + } + if (common_transvr_dump(self) < 0) { + return -1; + } + printk(KERN_INFO " |- :%d\n", self->len_sm); + printk(KERN_INFO " |- :%d\n", self->len_smf); + printk(KERN_INFO " '- :0x%02x\n", self->rate_id); + return 0; +} + + +int +qsfp_transvr_dump(struct transvr_obj_s* self) { + + if (TRANSVR_INFO_DUMP_ENABLE != 1) { + return 0; + } + if (common_transvr_dump(self) < 0) { + return -1; + } + printk(KERN_INFO " |- :%d\n", self->len_smf); + printk(KERN_INFO " '- :Class_%d\n", __qsfp_get_power_cls(self, 0)); + return 0; +} + + +int +fake_transvr_dump(struct transvr_obj_s* self) { + + printk(KERN_INFO "[SWPS] Dump transceiver information: %s\n", self->swp_name); + printk(KERN_INFO " |- :FAKE\n"); + printk(KERN_INFO " |- :FAKE_VENDER_NAME\n"); + printk(KERN_INFO " |- :FAKE_VENDER_PN\n"); + printk(KERN_INFO " |- :FAKE_VENDER_REV\n"); + printk(KERN_INFO " |- :FAKE_VENDER_SN\n"); + printk(KERN_INFO " |- :0x99\n"); + printk(KERN_INFO " |- :99\n"); + printk(KERN_INFO " |- :99\n"); + printk(KERN_INFO " |- :99\n"); + printk(KERN_INFO " |- :99\n"); + printk(KERN_INFO " |- :99\n"); + printk(KERN_INFO " |- :99\n"); + printk(KERN_INFO " '- :0x99\n"); + return 0; +} + + +/* ========== Object functions for fake type ========== + */ +int +fake_transvr_update(struct transvr_obj_s *self, + int show_err){ + self->state = STATE_TRANSVR_CONNECTED; + return 0; +} + + +int +fake_get_binary(struct transvr_obj_s *self){ + return 1; +} + +int +fake_get_int(struct transvr_obj_s *self){ + return 99; +} + + +int +fake_get_hex(struct transvr_obj_s *self){ + return 0x0f; +} + + +int +fake_get_str(struct transvr_obj_s *self, char *buf) { + return snprintf(buf, 16, "fake_get_str\n"); +} + + +int +fake_set_int(struct transvr_obj_s *self, int input){ + SWPS_INFO("%s: %d\n", __func__, input); + return 0; +} + + +int +fake_set_hex(struct transvr_obj_s *self, int input){ + SWPS_INFO("%s: 0x%02x\n", __func__, input); + return 0; +} + + +/* ========== Object functions for unsupported ========== + */ +int +unsupported_get_func(struct transvr_obj_s *self){ + return ERR_TRANSVR_NOTSUPPORT; +} + + +int +unsupported_get_func2(struct transvr_obj_s *self, + char *buf_p) { + int len = snprintf(buf_p, 8, "%d\n", ERR_TRANSVR_NOTSUPPORT); + return len; +} + + +int +unsupported_set_func(struct transvr_obj_s *self, + int input_val){ + return ERR_TRANSVR_NOTSUPPORT; +} + + + +/* ========== Object functions for long term task ========== + * + * [Note] + * SWPS transceiver worker is likely the green-thread (coroutine). + * Due to resource and performance considerations. SWPS run all + * features in one kthread at the same time, and handle by it self. + */ + +/* For Transceiver Task Handling + */ +static struct transvr_worker_s * +transvr_task_get(struct transvr_obj_s *self, + char *func_name) { + + struct transvr_worker_s *curr_p = self->worker_p; + + while(curr_p != NULL){ + if (strcmp((curr_p->func_name), func_name) == 0 ) { + return curr_p; + } + curr_p = curr_p->next_p; + } + return NULL; +} + + +static struct transvr_worker_s* +transvr_task_creat(struct transvr_obj_s *self, + int (*main_task)(struct transvr_worker_s *task), + int (*post_task)(struct transvr_worker_s *task), + char *caller) { + + struct transvr_worker_s *task_p = NULL; + struct transvr_worker_s *curr_p = NULL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + /* Check task not exist */ + task_p = transvr_task_get(self, caller); + if (task_p) { + snprintf(err_msg, sizeof(err_msg), "Task already created!"); + goto err_transvr_task_creat; + } + /* Create task worker */ + task_p = kzalloc(sizeof(struct transvr_worker_s), GFP_KERNEL); + if (!task_p){ + snprintf(err_msg, sizeof(err_msg), "kzalloc fail"); + goto err_transvr_task_creat; + } + /* Setup task data */ + task_p->transvr_p = self; + task_p->next_p = NULL; + task_p->trigger_time = 0; + task_p->retry = 1; + task_p->state = STATE_T_TASK_INIT; + task_p->main_task = main_task; + task_p->post_task = post_task; + task_p->p_data = NULL; + snprintf(task_p->func_name, sizeof(task_p->func_name), "%s", caller); + /* Setup Link List */ + if (self->worker_p) { + curr_p = self->worker_p; + while(curr_p->next_p != NULL) { + curr_p = curr_p->next_p; + } + curr_p->next_p = task_p; + task_p->pre_p = curr_p; + } else { + self->worker_p = task_p; + task_p->pre_p = NULL; + } + return task_p; + +err_transvr_task_creat: + SWPS_ERR("%s: %s :%s :%s\n", + __func__, err_msg, caller, self->swp_name); + return NULL; +} + + +static void +transvr_task_free_one(struct transvr_worker_s *task_p){ + + struct transvr_worker_s *pre_p = NULL; + struct transvr_worker_s *next_p = NULL; + + if (task_p) { + pre_p = task_p->pre_p; + next_p = task_p->next_p; + + if ((pre_p) && (next_p)) { + pre_p->next_p = next_p; + next_p->pre_p = pre_p; + + } else if ((!pre_p) && (next_p)) { + next_p->pre_p = NULL; + + } else if ((pre_p) && (!next_p)) { + pre_p->next_p = NULL; + + } else if ((!pre_p) && (!next_p)) { + task_p->transvr_p->worker_p = NULL; + } else { + SWPS_ERR("%s: Unexcept case!\n :%s", + __func__, task_p->transvr_p->swp_name); + } + kfree(task_p->p_data); + kfree(task_p); + } +} + + +static void +transvr_task_free_all(struct transvr_obj_s *self) { + + struct transvr_worker_s *curr_p = NULL; + struct transvr_worker_s *next_p = NULL; + + if (self->worker_p) { + curr_p = self->worker_p; + while(curr_p) { + next_p = curr_p->next_p; + transvr_task_free_one(curr_p); + curr_p = next_p; + } + self->worker_p = NULL; + } +} + + +static int +_transvr_task_run_main(struct transvr_worker_s *task_p) { + + int retval = DEBUG_TRANSVR_INT_VAL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + if (!task_p){ + snprintf(err_msg, sizeof(err_msg), "main_task is NULL!"); + goto main_transvr_task_err; + } + if ((task_p->trigger_time) == 0){ + goto main_transvr_task_run; + } + if (time_before(jiffies, task_p->trigger_time)){ + goto main_transvr_task_wait; + } + goto main_transvr_task_run; + +main_transvr_task_run: + if (task_p->retry != VAL_TRANSVR_TASK_RETRY_FOREVER) { + task_p->retry -= 1; + } + retval = task_p->main_task(task_p); + if (retval < 0) { + if (task_p->retry > 0) { + task_p->state = STATE_T_TASK_WAIT; + return EVENT_TRANSVR_TASK_WAIT; + } + snprintf(err_msg, sizeof(err_msg), "Run main_task fail!"); + goto main_transvr_task_err; + } + goto main_transvr_task_identify; + +main_transvr_task_identify: + switch (retval) { + case EVENT_TRANSVR_TASK_WAIT: + task_p->state = STATE_T_TASK_WAIT; + return EVENT_TRANSVR_TASK_WAIT; + + case EVENT_TRANSVR_TASK_DONE: + task_p->state = STATE_T_TASK_DONE; + return EVENT_TRANSVR_TASK_DONE; + + default: + break; + } + snprintf(err_msg, sizeof(err_msg), "Run main_task fail!"); + goto main_transvr_task_err; + +main_transvr_task_wait: + task_p->state = STATE_T_TASK_WAIT; + return EVENT_TRANSVR_TASK_WAIT; + +main_transvr_task_err: + task_p->state = STATE_T_TASK_FAIL; + SWPS_INFO("%s: %s :%d :%s\n", + __func__, err_msg, retval, task_p->transvr_p->swp_name); + return EVENT_TRANSVR_INIT_FAIL; +} + + +static int +_transvr_task_run_post(struct transvr_worker_s *task_p) { + + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + if ((task_p->post_task) == NULL) { + return EVENT_TRANSVR_TASK_DONE; + } + switch (task_p->state) { + case STATE_T_TASK_WAIT: + case STATE_T_TASK_INIT: + goto post_transvr_task_wait; + + case STATE_T_TASK_DONE: + case STATE_T_TASK_FAIL: + goto post_transvr_task_run; + + default: + break; + } + snprintf(err_msg, sizeof(err_msg), "Unexcept task state"); + goto post_transvr_task_err; + +post_transvr_task_run: + task_p->post_task(task_p); + return EVENT_TRANSVR_TASK_DONE; + +post_transvr_task_wait: + return EVENT_TRANSVR_TASK_WAIT; + +post_transvr_task_err: + SWPS_INFO("%s: %s :%d :%s\n", + __func__, err_msg, task_p->state, task_p->transvr_p->swp_name); + return EVENT_TRANSVR_TASK_FAIL; +} + + +static int +transvr_task_run_one(struct transvr_worker_s *task_p) { + + int retval_main = DEBUG_TRANSVR_INT_VAL; + int retval_post = DEBUG_TRANSVR_INT_VAL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + retval_main = _transvr_task_run_main(task_p); + if (retval_main < 0) { + snprintf(err_msg, sizeof(err_msg), "Execute main_task fail!"); + goto err_transvr_task_run_one; + } + retval_post = _transvr_task_run_post(task_p); + if (retval_post < 0) { + snprintf(err_msg, sizeof(err_msg), "Execute post_task fail!"); + goto err_transvr_task_run_one; + } + return retval_main; + +err_transvr_task_run_one: + SWPS_INFO("%s: %s
:%d :%d :%s :%s\n", + __func__, err_msg, retval_main, retval_post, + task_p->func_name, task_p->transvr_p->swp_name); + return EVENT_TRANSVR_TASK_FAIL; +} + + +static int +transvr_task_run_all(struct transvr_obj_s *self) { + + int haserr = 0; + int retval = DEBUG_TRANSVR_INT_VAL; + struct transvr_worker_s *curr_p = NULL; + struct transvr_worker_s *next_p = NULL; + + if ((self->worker_p) == NULL) { + return EVENT_TRANSVR_TASK_DONE; + } + curr_p = self->worker_p; + while (curr_p != NULL) { + next_p = curr_p->next_p; + retval = transvr_task_run_one(curr_p); + if (curr_p->retry == VAL_TRANSVR_TASK_RETRY_FOREVER) { + curr_p = next_p; + continue; + } + switch (retval) { + case EVENT_TRANSVR_TASK_WAIT: + break; + case EVENT_TRANSVR_TASK_DONE: + transvr_task_free_one(curr_p); + break; + case EVENT_TRANSVR_TASK_FAIL: + + default: + haserr = 1; + transvr_task_free_one(curr_p); + break; + } + curr_p = next_p; + } + if (haserr) { + return EVENT_TRANSVR_TASK_FAIL; + } + return EVENT_TRANSVR_TASK_DONE; +} + + +static void +transvr_task_set_delay(struct transvr_worker_s *task_p, + unsigned long delay_msec) { + + task_p->trigger_time = (jiffies + (delay_msec * (HZ/1000))); +} + + +static void +transvr_task_set_retry(struct transvr_worker_s *task_p, + unsigned long retry_times) { + + task_p->retry = retry_times; +} + + +/* For Transceiver Post Task + */ +int +taskfunc_post_do_nothing(struct transvr_worker_s *task_p) { + + return EVENT_TRANSVR_TASK_DONE; +} + + +int +taskfunc_post_handle_task_state(struct transvr_worker_s *task_p) { + + struct transvr_obj_s* tp = task_p->transvr_p; + + switch (task_p->state) { + case STATE_T_TASK_INIT: + case STATE_T_TASK_WAIT: + return EVENT_TRANSVR_TASK_WAIT; + + case STATE_T_TASK_DONE: + tp->state = STATE_TRANSVR_CONNECTED; + tp->send_uevent(tp, KOBJ_ADD); + return EVENT_TRANSVR_TASK_DONE; + + case STATE_T_TASK_FAIL: + tp->state = STATE_TRANSVR_UNEXCEPTED; + return EVENT_TRANSVR_TASK_FAIL; + + default: + break; + } + return EVENT_TRANSVR_TASK_FAIL; +} + + +/* For Transceiver Main Task + */ +int +_taskfunc_sfp_setup_soft_rs(struct transvr_worker_s *task_p, + int input_val, + int address, + int page, + int offset, + int bit_shift, + uint8_t *attr_p, + char *caller) { + + int show_err = 0; + int err_code = DEBUG_TRANSVR_INT_VAL; + char *err_str = DEBUG_TRANSVR_STR_VAL; + char *func_str = "_taskfunc_sfp_setup_soft_rs"; + + err_code = _sfp_update_attr_soft_rs0(task_p->transvr_p, 0); + if (err_code < 0) { + err_str = "Get current soft_rs0 fail!"; + goto err_taskfunc_sfp_setup_soft_rs_1; + } + err_code = __sfp_set_soft_rs(task_p->transvr_p, + input_val, + address, + page, + offset, + bit_shift, + attr_p, + caller, + show_err); + if (err_code < 0) { + err_str = "Get current soft_rs0 fail!"; + goto err_taskfunc_sfp_setup_soft_rs_1; + } + return EVENT_TRANSVR_TASK_DONE; + +err_taskfunc_sfp_setup_soft_rs_1: + if ((task_p->retry) == 0) { + SWPS_INFO("%s: %s :%s :%d :%d\n", + func_str, err_str, task_p->transvr_p->swp_name, input_val, err_code); + } + return EVENT_TRANSVR_TASK_FAIL; +} + + +int +__taskfunc_sfp_setup_hard_rs(struct transvr_worker_s *task_p, + int input_val, + int (*get_func)(struct ioexp_obj_s *self, int virt_offset), + int (*set_func)(struct ioexp_obj_s *self, int virt_offset, int input_val)) { + + int err_val = EVENT_TRANSVR_EXCEP_EXCEP; + char *err_str = DEBUG_TRANSVR_STR_VAL; + + err_val = get_func(task_p->transvr_p->ioexp_obj_p, + task_p->transvr_p->ioexp_virt_offset); + + if (err_val < 0) { + if (err_val == ERR_IOEXP_NOTSUPPORT) { + return EVENT_TRANSVR_TASK_DONE; + } + err_str = "Get current hard_rs fail!"; + goto err_p_taskfunc_sfp_setup_hard_rs_1; + } + if (err_val == input_val) { + return EVENT_TRANSVR_TASK_DONE; + } + err_val = set_func(task_p->transvr_p->ioexp_obj_p, + task_p->transvr_p->ioexp_virt_offset, + input_val); + if (err_val < 0) { + err_str = "Setup hard_rs fail!"; + goto err_p_taskfunc_sfp_setup_hard_rs_1; + } + return EVENT_TRANSVR_TASK_DONE; + +err_p_taskfunc_sfp_setup_hard_rs_1: + if ((task_p->retry) == 0) { + SWPS_INFO("%s: %s :%s :%d :%d\n", + __func__, err_str, task_p->transvr_p->swp_name, input_val, err_val); + } + return EVENT_TRANSVR_TASK_FAIL; +} + + +int +_taskfunc_sfp_setup_hard_rs0(struct transvr_worker_s *task_p, + int input_val) { + + return __taskfunc_sfp_setup_hard_rs(task_p, + input_val, + task_p->transvr_p->ioexp_obj_p->get_hard_rs0, + task_p->transvr_p->ioexp_obj_p->set_hard_rs0); +} + + +int +_taskfunc_sfp_setup_hard_rs1(struct transvr_worker_s *task_p, + int input_val) { + + return __taskfunc_sfp_setup_hard_rs(task_p, + input_val, + task_p->transvr_p->ioexp_obj_p->get_hard_rs1, + task_p->transvr_p->ioexp_obj_p->set_hard_rs1); +} + + +int +_taskfunc_sfp_setup_rs0(struct transvr_worker_s *task_p, + int input_val) { + + int bit_shift = 3; + int old_val = DEBUG_TRANSVR_INT_VAL; + int err_val = EVENT_TRANSVR_EXCEP_EXCEP; + char *err_str = DEBUG_TRANSVR_STR_VAL; + char *func_str = "_taskfunc_sfp_setup_rs0"; + + err_val = _taskfunc_sfp_setup_hard_rs0(task_p, + input_val); + if (err_val < 0) { + err_str = "Setup hard_rs0 fail!"; + goto err_private_taskfunc_sfp_setup_rs0_1; + } + old_val = err_val; + err_val = _taskfunc_sfp_setup_soft_rs(task_p, + input_val, + task_p->transvr_p->eeprom_map_p->addr_soft_rs0, + task_p->transvr_p->eeprom_map_p->page_soft_rs0, + task_p->transvr_p->eeprom_map_p->offset_soft_rs0, + bit_shift, + &(task_p->transvr_p->soft_rs0), + func_str); + if (err_val < 0) { + err_str = "Setup soft_rs0 fail!"; + goto err_private_taskfunc_sfp_setup_rs0_1; + } + return EVENT_TRANSVR_TASK_DONE; + +err_private_taskfunc_sfp_setup_rs0_1: + if ((task_p->retry) == 0) { + SWPS_INFO("%s: %s :%s :%d :%d\n", + func_str, err_str, task_p->transvr_p->swp_name, input_val, err_val); + } + _taskfunc_sfp_setup_hard_rs0(task_p, old_val); + return EVENT_TRANSVR_TASK_FAIL; +} + + +int +_taskfunc_sfp_setup_rs1(struct transvr_worker_s *task_p, + int input_val) { + + int bit_shift = 3; + int old_val = DEBUG_TRANSVR_INT_VAL; + int err_val = EVENT_TRANSVR_EXCEP_EXCEP; + char *err_str = DEBUG_TRANSVR_STR_VAL; + char *func_str = "_taskfunc_sfp_setup_rs1"; + + err_val = _taskfunc_sfp_setup_hard_rs1(task_p, + input_val); + if (err_val < 0) { + err_str = "Setup hard_rs1 fail!"; + goto err_private_taskfunc_sfp_setup_rs1_1; + } + old_val = err_val; + err_val = _taskfunc_sfp_setup_soft_rs(task_p, + input_val, + task_p->transvr_p->eeprom_map_p->addr_soft_rs1, + task_p->transvr_p->eeprom_map_p->page_soft_rs1, + task_p->transvr_p->eeprom_map_p->offset_soft_rs1, + bit_shift, + &(task_p->transvr_p->soft_rs1), + func_str); + if (err_val < 0) { + err_str = "Setup soft_rs1 fail!"; + goto err_private_taskfunc_sfp_setup_rs1_1; + } + return EVENT_TRANSVR_TASK_DONE; + +err_private_taskfunc_sfp_setup_rs1_1: + if ((task_p->retry) == 0) { + SWPS_INFO("%s: %s :%s :%d :%d\n", + func_str, err_str, task_p->transvr_p->swp_name, input_val, err_val); + } + _taskfunc_sfp_setup_hard_rs1(task_p, old_val); + return EVENT_TRANSVR_TASK_FAIL; +} + + +int +taskfunc_sfp_setup_SFF8431_case1(struct transvr_worker_s *task_p) { + /* SFF-8431 (8/4/2G Rx Rate_Select only) */ + int update_val = 1; + + return _taskfunc_sfp_setup_rs0(task_p, update_val); +} + + + +int +taskfunc_sfp_setup_SFF8431_case2(struct transvr_worker_s *task_p) { + /* SFF-8431 (8/4/2G Tx Rate_Select only) */ + int update_val = 1; + + return _taskfunc_sfp_setup_rs1(task_p, update_val); +} + + +int +taskfunc_sfp_setup_SFF8431_case3(struct transvr_worker_s *task_p) { + /* SFF-8431 (8/4/2G Independent Rx & Tx Rate_select) */ + int update_rs0 = 1; + int update_rs1 = 1; + int err_code = DEBUG_TRANSVR_INT_VAL; + + err_code = _taskfunc_sfp_setup_rs0(task_p, update_rs0); + if (err_code < 0) { + return err_code; + } + return _taskfunc_sfp_setup_rs1(task_p, update_rs1); +} + + +int +taskfunc_sfp_handle_1g_rj45(struct transvr_worker_s *task_p) { + + /* Not all of platform support 0x56 for transceiver + * external PHY, Support list as below: + * => 1. Magnolia-PVT (PS: EVT & DVT not ready) + */ + int ext_phy_addr = 0x56; + int ext_phy_page = -1; + int ext_phy_offs = 0x11; + int ext_phy_len = 1; + int lstate_mask = 0x04; /* 00000100 */ + int show_err = 0; + int fail_retry = 5; + int fail_delay = 1000; /* msec */ + int err_code = DEBUG_TRANSVR_INT_VAL; + uint8_t detect_val = DEBUG_TRANSVR_HEX_VAL; + char err_str[64] = DEBUG_TRANSVR_STR_VAL; + int *tmp_p = NULL; + char *func_name = "taskfunc_sfp_handle_1g_rj45"; + + if (task_p->transvr_p->state != STATE_TRANSVR_CONNECTED) { + return EVENT_TRANSVR_TASK_DONE; + } + if ( (task_p->transvr_p->info != TRANSVR_CLASS_BASE_T_1000) && + (task_p->transvr_p->info != TRANSVR_CLASS_BASE_T_1000_up) ) { + goto err_taskfunc_sfp_handle_1g_rj45_1; + } + err_code = _common_update_uint8_attr(task_p->transvr_p, + ext_phy_addr, + ext_phy_page, + ext_phy_offs, + ext_phy_len, + &detect_val, + func_name, + show_err); + if ( (err_code < 0) || + (detect_val == DEBUG_TRANSVR_HEX_VAL) ) { + snprintf(err_str, sizeof(err_str), "Detect external link status fail"); + goto err_taskfunc_sfp_handle_1g_rj45_2; + } + if ((detect_val & lstate_mask) == lstate_mask) { + goto ok_taskfunc_sfp_handle_1g_rj45_link_up; + } + goto ok_taskfunc_sfp_handle_1g_rj45_link_down; + +ok_taskfunc_sfp_handle_1g_rj45_link_up: + /* Filter out noise */ + if (!(task_p->p_data)) { + tmp_p = kzalloc(sizeof(int), GFP_KERNEL); + if (!tmp_p) { + snprintf(err_str, sizeof(err_str), "kzalloc p_data fail"); + goto err_taskfunc_sfp_handle_1g_rj45_2; + } + *tmp_p = TRANSVR_CLASS_BASE_T_1000_up; + task_p->p_data = tmp_p; + goto ok_taskfunc_sfp_handle_1g_rj45_done; + } + if ((*(int *)(task_p->p_data)) != TRANSVR_CLASS_BASE_T_1000_up) { + kfree(task_p->p_data); + task_p->p_data = NULL; + snprintf(err_str, sizeof(err_str), "Internal error"); + goto err_taskfunc_sfp_handle_1g_rj45_2; + } + task_p->transvr_p->info = TRANSVR_CLASS_BASE_T_1000_up; + kfree(task_p->p_data); + task_p->p_data = NULL; + goto ok_taskfunc_sfp_handle_1g_rj45_done; + +ok_taskfunc_sfp_handle_1g_rj45_link_down: + if (task_p->p_data) { + kfree(task_p->p_data); + task_p->p_data = NULL; + } + task_p->transvr_p->info = TRANSVR_CLASS_BASE_T_1000; + goto ok_taskfunc_sfp_handle_1g_rj45_done; + +ok_taskfunc_sfp_handle_1g_rj45_done: + if (task_p->retry != VAL_TRANSVR_TASK_RETRY_FOREVER) { + transvr_task_set_retry(task_p, VAL_TRANSVR_TASK_RETRY_FOREVER); + } + return EVENT_TRANSVR_TASK_DONE; + +err_taskfunc_sfp_handle_1g_rj45_1: + snprintf(err_str, sizeof(err_str), "Detect transceiver:%d not Base-T, remove task.", + task_p->transvr_p->info); + SWPS_INFO("%s: %s :%s\n", __func__, err_str, task_p->transvr_p->swp_name); + transvr_task_set_retry(task_p, 0); + return EVENT_TRANSVR_TASK_DONE; + +err_taskfunc_sfp_handle_1g_rj45_2: + if (task_p->retry == VAL_TRANSVR_TASK_RETRY_FOREVER) { + transvr_task_set_retry(task_p, fail_retry); + } + if ((task_p->retry) == 0) { + /* Error case: + * => In this case, SWPS will stop external Link state monitor features + * and keeps transvr_p->info on TRANSVR_CLASS_BASE_T_1000_up. + * Upper layer will see it always Linkup that because of these type of + * transceiver has external phy, BCM chip see it as Loopback transceiver. + */ + SWPS_WARN("%s can not access external PHY of Base-T SFP transceiver\n", + task_p->transvr_p->swp_name); + task_p->transvr_p->info = TRANSVR_CLASS_BASE_T_1000_up; + return EVENT_TRANSVR_TASK_DONE; + } else { + transvr_task_set_delay(task_p, fail_delay); + } + return EVENT_TRANSVR_TASK_FAIL; +} + + +int +_taskfunc_qsfp_setup_power_mod(struct transvr_obj_s *self, + int setup_val) { + + int curr_val = DEBUG_TRANSVR_INT_VAL; + int err_val = DEBUG_TRANSVR_INT_VAL; + char *err_msg = DEBUG_TRANSVR_STR_VAL; + + curr_val = self->ioexp_obj_p->get_lpmod(self->ioexp_obj_p, + self->ioexp_virt_offset); + if (curr_val < 0){ + err_msg = "Get current value fail!"; + goto err_private_taskfunc_qsfp_setup_power_mod_1; + } + if (curr_val == setup_val){ + return EVENT_TRANSVR_TASK_DONE; + } + err_val = self->ioexp_obj_p->set_lpmod(self->ioexp_obj_p, + self->ioexp_virt_offset, + setup_val); + if (err_val < 0){ + err_msg = "Setup power mode fail!"; + goto err_private_taskfunc_qsfp_setup_power_mod_1; + } + return EVENT_TRANSVR_TASK_DONE; + +err_private_taskfunc_qsfp_setup_power_mod_1: + SWPS_INFO("%s: %s :%d :%d :%d\n", + __func__, err_msg, err_val, curr_val, setup_val); + return EVENT_TRANSVR_TASK_FAIL; +} + + +int +taskfunc_qsfp_handle_tx_disable(struct transvr_worker_s *task_p) { + + int i = 0; + int retry = 5; + int delay_ms = 100; + + if (task_p->transvr_p->auto_tx_disable == VAL_TRANSVR_FUNCTION_DISABLE) { + return EVENT_TRANSVR_TASK_DONE; + } + if (!_qsfp_is_implement_tx_disable(task_p->transvr_p)) { + return EVENT_TRANSVR_TASK_DONE; + } + for (i=0; itransvr_p, + task_p->transvr_p->auto_tx_disable) + == EVENT_TRANSVR_TASK_DONE) { + goto ok_taskfunc_qsfp_handle_tx_disable; + } + mdelay(delay_ms); + } + SWPS_INFO("%s auto setup tx_disable:0x%02x fail.\n", + task_p->transvr_p->swp_name, + task_p->transvr_p->auto_tx_disable); + return EVENT_TRANSVR_INIT_FAIL; + +ok_taskfunc_qsfp_handle_tx_disable: + SWPS_INFO("%s auto setup tx_disable:0x%02x ok.\n", + task_p->transvr_p->swp_name, + task_p->transvr_p->auto_tx_disable); + return EVENT_TRANSVR_TASK_DONE; +} + + +int +taskfunc_qsfp_set_hpmod(struct transvr_worker_s *task_p) { + + int err = DEBUG_TRANSVR_INT_VAL; + int HIGH_POWER_MODE = 0; + + /* Handle power mode */ + err = _taskfunc_qsfp_setup_power_mod(task_p->transvr_p, + HIGH_POWER_MODE); + if (err < 0) { + SWPS_INFO("%s: setup hpmod fail :%d :%s\n", + __func__, err, task_p->transvr_p->swp_name); + return err; + } + /* Handle auto tx_disable + * [Note] + * => Because there are some transceiver have timing issues or + * setup sequence issues, therefore we handle auto tx_disable + * after handle power mode. + */ + mdelay(100); + return taskfunc_qsfp_handle_tx_disable(task_p); +} + + +int +taskfunc_qsfp_set_lpmod(struct transvr_worker_s *task_p) { + + int LOW_POWER_MODE = 1; + return _taskfunc_qsfp_setup_power_mod(task_p->transvr_p, + LOW_POWER_MODE); +} + + +static int +initfunc_sfp_handle_multi_rate_mode(struct transvr_obj_s *self) { + + int task_retry = 3; + int err_code = DEBUG_TRANSVR_INT_VAL; + char *err_str = DEBUG_TRANSVR_STR_VAL; + char *func_str = "sfp_handle_multi_rate_mode"; + struct transvr_worker_s *task_p = NULL; + + switch (self->rate_id) { + case 0x00: /* Unspecified */ + case 0x03: /* Unspecified */ + case 0x05: /* Unspecified */ + case 0x07: /* Unspecified */ + case 0x09: /* Unspecified */ + case 0x0B: /* Unspecified */ + case 0x0D: /* Unspecified */ + case 0x0F: /* Unspecified */ + goto sfp_handle_multi_rate_mode_4_unspecified; + + case 0x02: /* SFF-8431 (8/4/2G Rx Rate_Select only) */ + task_p = transvr_task_creat(self, + taskfunc_sfp_setup_SFF8431_case1, + taskfunc_post_handle_task_state, + func_str); + goto sfp_handle_multi_rate_mode_4_sff8431; + + case 0x04: /* SFF-8431 (8/4/2G Tx Rate_Select only) */ + task_p = transvr_task_creat(self, + taskfunc_sfp_setup_SFF8431_case2, + taskfunc_post_handle_task_state, + func_str); + goto sfp_handle_multi_rate_mode_4_sff8431; + + case 0x06: /* SFF-8431 (8/4/2G Independent Rx & Tx Rate_select) */ + task_p = transvr_task_creat(self, + taskfunc_sfp_setup_SFF8431_case3, + taskfunc_post_handle_task_state, + func_str); + goto sfp_handle_multi_rate_mode_4_sff8431; + + case 0x01: /* SFF-8079 (4/2/1G Rate_Select & AS0/AS1) */ + err_str = "SFF-8079 (4/2/1G Rate_Select & AS0/AS1)"; + goto sfp_handle_multi_rate_mode_4_not_support; + + case 0x08: /* FC-PI-5 (16/8/4G Rx Rate_select only) + * High=16G only, Low=8G/4G + */ + err_str = "FC-PI-5 (16/8/4G Rx Rate_select only)"; + goto sfp_handle_multi_rate_mode_4_not_support; + + case 0x0A: /* FC-PI-5 (16/8/4G Independent Rx, Tx Rate_select) + * High=16G only, Low=8G/4G + */ + err_str = "FC-PI-5 (16/8/4G Independent Rx, Tx Rate_select)"; + goto sfp_handle_multi_rate_mode_4_not_support; + + case 0x0C: /* FC-PI-6 (32/16/8G Independent Rx, Tx Rate_Select) + * High=32G only, Low = 16G/8G + */ + err_str = "FC-PI-6 (32/16/8G Independent Rx, Tx Rate_Select)"; + goto sfp_handle_multi_rate_mode_4_not_support; + + case 0x0E: /* 10/8G Rx and Tx Rate_Select controlling the operation or + * locking modes of the internal signal conditioner, retimer + * or CDR, according to the logic table defined in Table 10-2, + * High Bit Rate (10G) =9.95-11.3 Gb/s; Low Bit Rate (8G) = + * 8.5 Gb/s. In this mode, the default value of bit 110.3 (Soft + * Rate Select RS(0), Table 9-11) and of bit 118.3 (Soft Rate + * Select RS(1), Table 10-1) is 1. + */ + err_str = "cable type: 0x0E"; + goto sfp_handle_multi_rate_mode_4_not_support; + + default: + err_str = "cable type: UNKNOW"; + goto sfp_handle_multi_rate_mode_4_not_support; + } + +sfp_handle_multi_rate_mode_4_sff8431: + if (!task_p) { + err_str = "Create task fail!"; + goto sfp_handle_multi_rate_mode_4_fail_1; + } + transvr_task_set_retry(task_p, task_retry); + return EVENT_TRANSVR_TASK_WAIT; + +sfp_handle_multi_rate_mode_4_unspecified: + return EVENT_TRANSVR_TASK_DONE; + +sfp_handle_multi_rate_mode_4_not_support: + SWPS_INFO("%s: Does not support %s :%s :0x%02x\n", + func_str, err_str, self->swp_name, self->rate_id); + return EVENT_TRANSVR_TASK_DONE; + +sfp_handle_multi_rate_mode_4_fail_1: + SWPS_INFO("%s: %s :%s :0x%02x, :%d\n", + func_str, err_str, self->swp_name, self->rate_id, err_code); + return EVENT_TRANSVR_INIT_FAIL; +} + + +static int +initfunc_sfp_handle_1g_rj45(struct transvr_obj_s *self) { + + struct transvr_worker_s *task_p = NULL; + int detect_cls = DEBUG_TRANSVR_INT_VAL; + char err_str[64] = DEBUG_TRANSVR_STR_VAL; + char *func_str = "initfunc_sfp_handle_1g_rj45"; + + + if (self->info == TRANSVR_CLASS_BASE_T_1000) { + task_p = transvr_task_creat(self, + taskfunc_sfp_handle_1g_rj45, + taskfunc_post_do_nothing, + func_str); + if (!task_p) { + snprintf(err_str, sizeof(err_str), "Create task fail"); + goto err_initfunc_sfp_handle_1g_rj45; + } + transvr_task_set_retry(task_p, VAL_TRANSVR_TASK_RETRY_FOREVER); + } + return EVENT_TRANSVR_TASK_DONE; + +err_initfunc_sfp_handle_1g_rj45: + SWPS_INFO("%s: %s :%s :%d\n", + __func__, err_str, self->swp_name, detect_cls); + return EVENT_TRANSVR_TASK_FAIL; +} + + +static int +initfunc_qsfp_handle_power_mode(struct transvr_obj_s *self) { + + int err_code = EVENT_TRANSVR_EXCEP_INIT; + int power_class = DEBUG_TRANSVR_INT_VAL; + int hpmod_retry = 3; + int lpower_config = 1; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + unsigned long hpmod_delay = 500; /* msec */ + struct transvr_worker_s *task_p = NULL; + + /* Handle power mode for IOEXP */ + power_class = __qsfp_get_power_cls(self, 0); + switch (power_class) { + case 1: /* Case: Low power mode (Class = 1) */ + err_code = _taskfunc_qsfp_setup_power_mod(self, lpower_config); + if (err_code < 0){ + snprintf(err_msg, sizeof(err_msg), "Setup lpmod fail :%d", err_code); + goto err_initfunc_qsfp_handle_power_mode; + } + return EVENT_TRANSVR_TASK_DONE; + + case 2: /* Case: High power mode (Class > 1) */ + case 3: + case 4: + case 5: + case 6: + case 7: + task_p = transvr_task_creat(self, + taskfunc_qsfp_set_hpmod, + taskfunc_post_handle_task_state, + "transvr_init_qsfp"); + if (!task_p) { + snprintf(err_msg, sizeof(err_msg), "Setup lpmod fail :%d", err_code); + goto err_initfunc_qsfp_handle_power_mode; + } + transvr_task_set_retry(task_p, hpmod_retry); + transvr_task_set_delay(task_p, hpmod_delay); + return EVENT_TRANSVR_TASK_WAIT; + + default: + break; + } + snprintf(err_msg, sizeof(err_msg), "Exception case"); + goto err_initfunc_qsfp_handle_power_mode; + +err_initfunc_qsfp_handle_power_mode: + SWPS_INFO("%s: %s :%s \n", __func__, err_msg, self->swp_name); + return EVENT_TRANSVR_INIT_FAIL; +} + + +int +initfunc_qsfp28_handle_cdr(struct transvr_obj_s *self) { + + uint8_t DEFAULT_VAL_CDR = 0xff; + int CDR_FUNC_EXISTED = 0x3; + int show_err = 1; + int err_val = EVENT_TRANSVR_TASK_FAIL; + char *err_msg = DEBUG_TRANSVR_STR_VAL; + char *func_str = "initfunc_qsfp28_handle_cdr"; + + err_val = __qsfp_get_cdr_present(self, 0); + if ( (err_val < 0) || + (err_val == DEBUG_TRANSVR_HEX_VAL) ) { + err_msg = "detect cdr_present fail!"; + goto err_taskfunc_qsfp_handle_cdr_1; + } + if (err_val == CDR_FUNC_EXISTED) { + err_val = _common_set_uint8_attr(self, + self->eeprom_map_p->addr_cdr, + self->eeprom_map_p->addr_cdr, + self->eeprom_map_p->offset_cdr, + DEFAULT_VAL_CDR, + &(self->cdr), + func_str, + show_err); + if (err_val < 0) { + err_msg = "set CDR fail!"; + goto err_taskfunc_qsfp_handle_cdr_1; + } + } + return EVENT_TRANSVR_TASK_DONE; + +err_taskfunc_qsfp_handle_cdr_1: + SWPS_INFO("%s: %s :%d :%s\n", + func_str, err_msg, err_val, self->swp_name); + return EVENT_TRANSVR_INIT_FAIL; +} + +/* ========== Object functions for Final State Machine ========== + */ +int +is_plugged(struct transvr_obj_s *self){ + + int limit = 63; + int present = DEBUG_TRANSVR_INT_VAL; + char emsg[64] = DEBUG_TRANSVR_STR_VAL; + struct ioexp_obj_s *ioexp_p = self->ioexp_obj_p; + + if (!ioexp_p) { + snprintf(emsg, limit, "ioexp_p is null!"); + goto err_is_plugged_1; + } + present = ioexp_p->get_present(ioexp_p, self->ioexp_virt_offset); + switch (present){ + case 0: + return 1; + case 1: + return 0; + case ERR_IOEXP_UNINIT: + snprintf(emsg, limit, "ioexp_p not ready!"); + goto err_is_plugged_1; + default: + if (ioexp_p->state == STATE_IOEXP_INIT){ + snprintf(emsg, limit, "ioexp_p not ready!"); + goto err_is_plugged_1; + } + break; + } + SWPS_INFO("%s: Exception case! :%d :%d\n", + __func__, present, ioexp_p->state); + return 0; + +err_is_plugged_1: + SWPS_DEBUG("%s: %s\n", __func__, emsg); + return 0; +} + + +static int +detect_transvr_type(struct transvr_obj_s* self){ + + int type = TRANSVR_TYPE_ERROR; + + self->i2c_client_p->addr = VAL_TRANSVR_COMID_ARREESS; + type = i2c_smbus_read_byte_data(self->i2c_client_p, + VAL_TRANSVR_COMID_OFFSET); + + /* Case: 1. Wait transceiver I2C module. + * 2. Transceiver I2C module failure. + * Note: 1. SFF allow maximum transceiver initial time is 2 second. So, there + * are exist some case that we need to wait transceiver. + * For these case, we keeps status on "TRANSVR_TYPE_UNPLUGGED", than + * state machine will keep trace with it. + * 2. There exist some I2C failure case we need to handle. Such as user + * insert the failure transceiver, or any reason cause it abnormal. + */ + if (type < 0){ + switch (type) { + case -EIO: + SWPS_DEBUG("%s: %s smbus return:-5 (I/O error)\n", + __func__, self->swp_name); + return TRANSVR_TYPE_UNPLUGGED; + case -ENXIO: + SWPS_DEBUG("%s: %s smbus return:-6 (No such device or address)\n", + __func__, self->swp_name); + return TRANSVR_TYPE_UNPLUGGED; + default: + break; + } + SWPS_INFO("%s: %s unexpected smbus return:%d \n", + __func__, self->swp_name, type); + return TRANSVR_TYPE_ERROR; + } + /* Identify valid transceiver type */ + switch (type){ + case TRANSVR_TYPE_SFP: + case TRANSVR_TYPE_QSFP: + case TRANSVR_TYPE_QSFP_PLUS: + case TRANSVR_TYPE_QSFP_28: + break; + case TRANSVR_TYPE_UNKNOW_1: + case TRANSVR_TYPE_UNKNOW_2: + type = TRANSVR_TYPE_UNKNOW_2; + break; + default: + SWPS_DEBUG("%s: unknow type:0x%02x \n", __func__, type); + type = TRANSVR_TYPE_ERROR; + break; + } + return type; +} + + +static int +detect_transvr_state(struct transvr_obj_s *self, + int result[2]){ + /* [return] [result-0] [result-1] + * 0 STATE_TRANSVR_CONNECTED TRANSVR_TYPE_FAKE + * 0 STATE_TRANSVR_DISCONNECTED TRANSVR_TYPE_UNPLUGGED + * 0 STATE_TRANSVR_ISOLATED TRANSVR_TYPE_ERROR + * 0 STATE_TRANSVR_INIT / + * 0 STATE_TRANSVR_SWAPPED + * 0 STATE_TRANSVR_CONNECTED + * ERR_TRNASVR_BE_ISOLATED STATE_TRANSVR_ISOLATED TRANSVR_TYPE_ERROR + * ERR_TRANSVR_I2C_CRASH STATE_TRANSVR_UNEXCEPTED TRANSVR_TYPE_ERROR + * ERR_TRANSVR_UNEXCPT STATE_TRANSVR_UNEXCEPTED TRANSVR_TYPE_UNKNOW_1/2 + */ + result[0] = STATE_TRANSVR_UNEXCEPTED; /* For return state */ + result[1] = TRANSVR_TYPE_ERROR; /* For return type */ + + /* Case1: Fake type */ + if (self->type == TRANSVR_TYPE_FAKE){ + result[0] = STATE_TRANSVR_CONNECTED; + result[1] = TRANSVR_TYPE_FAKE; + return 0; + } + /* Case2: Transceiver unplugged */ + if (!is_plugged(self)){ + result[0] = STATE_TRANSVR_DISCONNECTED; + result[1] = TRANSVR_TYPE_UNPLUGGED; + return 0; + } + /* Case3: Transceiver be isolated */ + if (self->state == STATE_TRANSVR_ISOLATED){ + result[0] = STATE_TRANSVR_ISOLATED; + result[1] = TRANSVR_TYPE_ERROR; + return ERR_TRNASVR_BE_ISOLATED; + } + /* Case4: Transceiver plugged */ + result[1] = detect_transvr_type(self); + /* Case4.1: I2C topology crash + * Note : There are some I2C issues cause by transceiver/cables. + * We need to check topology status when user insert it. + * But in this step, we can't not ensure this is the issues + * port. So, it return the ERR_TRANSVR_I2C_CRASH, then upper + * layer will diagnostic I2C topology. + */ + if (check_channel_tier_1() < 0) { + SWPS_INFO("%s: %s detect I2C crash :%d\n", + __func__, self->swp_name, self->state); + result[0] = STATE_TRANSVR_UNEXCEPTED; + result[1] = TRANSVR_TYPE_ERROR; + return ERR_TRANSVR_I2C_CRASH; + } + /* Case4.2: System initial not ready, + * Note : Sometime i2c channel or transceiver EEPROM will delay that will + * cause system in inconsistent state between EEPROM and IOEXP. + * In this case, SWP transceiver object keep state at LINK_DOWN + * to wait system ready. + * By the way, State Machine will handle these case. + */ + if (result[1] == TRANSVR_TYPE_UNPLUGGED){ + result[0] = STATE_TRANSVR_DISCONNECTED; + return 0; + } + /* Case4.3: Error transceiver type */ + if (result[1] == TRANSVR_TYPE_ERROR){ + result[0] = STATE_TRANSVR_ISOLATED; + SWPS_INFO("%s: %s detect error type\n", __func__, self->swp_name); + alarm_msg_2_user(self, "detected transceiver/cables not meet SFF standard!"); + return ERR_TRNASVR_BE_ISOLATED; + } + /* Case3.3: Unknow transceiver type */ + if ((result[1] == TRANSVR_TYPE_UNKNOW_1) || + (result[1] == TRANSVR_TYPE_UNKNOW_2) ){ + result[0] = STATE_TRANSVR_UNEXCEPTED; + return ERR_TRANSVR_UNEXCPT; + } + /* Case3.4: During initial process */ + if (self->state == STATE_TRANSVR_INIT){ + result[0] = STATE_TRANSVR_INIT; + return 0; + } + /* Case3.5: Transceiver be swapped */ + if (self->type != result[1]){ + result[0] = STATE_TRANSVR_SWAPPED; + return 0; + } + /* Case3.6: Link up state */ + result[0] = STATE_TRANSVR_CONNECTED; + return 0; +} + + +int +_sfp_detect_class_by_extend_comp(struct transvr_obj_s* self) { + /* Reference: SFF-8024 (v3.8) + */ + int detect_val = _sfp_get_comp_extended(self); + + switch(detect_val) { + case 0x00: /* Unspecified */ + return TRANSVR_CLASS_UNSPECIFIED; + + case 0x01: /* 100G AOC (Active Optical Cable) or 25GAUI C2M */ + case 0x18: /* 100G AOC or 25GAUI C2M AOC. */ + return TRANSVR_CLASS_OPTICAL_25G_AOC; + + case 0x02: /* 100GBASE-SR4 or 25GBASE-SR */ + return TRANSVR_CLASS_OPTICAL_25G_SR; + + case 0x03: /* 100GBASE-LR4 or 25GBASE-LR */ + return TRANSVR_CLASS_OPTICAL_25G_LR; + + case 0x04: /* 100GBASE-ER4 or 25GBASE-ER */ + return TRANSVR_CLASS_OPTICAL_25G_ER; + + case 0x08: /* 100G ACC (Active Copper Cable) or 25GAUI C2M ACC. */ + case 0x0b: /* 100GBASE-CR4 or 25GBASE-CR CA-L */ + case 0x0c: /* 25GBASE-CR CA-S */ + case 0x0d: /* 25GBASE-CR CA-N */ + case 0x19: /* 100G ACC or 25GAUI C2M ACC. */ + return TRANSVR_CLASS_COPPER_L1_25G; + + default: + break; + } + SWPS_INFO("%s: Unexcept value:0x%02x\n :%s", + __func__, detect_val, self->swp_name); + return TRANSVR_CLASS_ERROR; +} + + +int +_sfp_detect_class_by_10_ethernet(struct transvr_obj_s* self) { + /* Reference: SFF-8472 (v12.2) + */ + int detect_val = DEBUG_TRANSVR_INT_VAL; + + detect_val = _sfp_get_comp_10g_eth_comp(self); + /* Case: Unspecified */ + if (detect_val == 0x00) { + return TRANSVR_CLASS_UNSPECIFIED; + } + /* Case: 10G Optical (x1) */ + if ((detect_val & 0x10) == 0x10) { /* 00010000 : 10GBASE-SR */ + return TRANSVR_CLASS_OPTICAL_10G_S_SR; + } + if ( ((detect_val & 0x20) == 0x20) || /* 00100000 : 10GBASE-LR */ + ((detect_val & 0x40) == 0x40) ){ /* 01000000 : 10GBASE-LRM */ + return TRANSVR_CLASS_OPTICAL_10G_S_LR; + } + if ((detect_val & 0x80) == 0x80) { /* 10000000 : 10GBASE-ER */ + return TRANSVR_CLASS_OPTICAL_10G_S_ER; + } + /* Case: ERROR */ + SWPS_INFO("%s: Unexcept value:0x%02x\n :%s", + __func__, detect_val, self->swp_name); + return TRANSVR_CLASS_ERROR; +} + + +int +_sfp_detect_if_sp_by_br(struct transvr_obj_s* self) { + + int lower_bound_1g = 0x0b; + int upper_bound_1g = 0x1A; + int lower_bound_10g = 0x60; + int upper_bound_10g = 0x75; + int lower_bound_25g = 0xf0; + int upper_bound_25g = 0xff; + int notmal_br = DEBUG_TRANSVR_INT_VAL; + + notmal_br = (int)(self->br); /* updated by update_all() */ + /* Check 25G */ + if ((notmal_br >= lower_bound_25g) && + (notmal_br <= upper_bound_25g) ) { + return TRANSVR_CLASS_25G; + } + /* Check 10G */ + if ((notmal_br >= lower_bound_10g) && + (notmal_br <= upper_bound_10g) ) { + return TRANSVR_CLASS_10G; + } + /* Check 1G */ + if ((notmal_br >= lower_bound_1g) && + (notmal_br <= upper_bound_1g) ) { + return TRANSVR_CLASS_1G; + } + return TRANSVR_CLASS_UNSPECIFIED; +} + + +int +_sfp_detect_class_by_1g_ethernet(struct transvr_obj_s* self) { + /* Reference: SFF-8472 (v12.2) + */ + int detect_val = DEBUG_TRANSVR_INT_VAL; + int speed_br = DEBUG_TRANSVR_INT_VAL; + int speed_tmp = DEBUG_TRANSVR_INT_VAL; + char err_str[64] = DEBUG_TRANSVR_STR_VAL; + + speed_br = _sfp_detect_if_sp_by_br(self); + detect_val = _sfp_get_comp_1g_eth_comp(self); + + if (detect_val < 0) { + snprintf(err_str, sizeof(err_str), "Detect abnormal value:%d", detect_val); + goto err_p_sfp_detect_class_by_1g_ethernet; + } + /* Case: Unspecified */ + if (detect_val == 0x00) { + return TRANSVR_CLASS_UNSPECIFIED; + } + /* Case: 1G (x1) */ + if ((detect_val & 0x01) == 0x01) { /* 00000001 : 1000BASE-SX */ + speed_tmp = TRANSVR_CLASS_OPTICAL_1G_SX; + goto ok_sfp_detect_class_by_1g_ethernet_4_check_br_10g; + } + if ((detect_val & 0x02) == 0x02) { /* 00000010 : 1000BASE-LX *3 */ + speed_tmp = TRANSVR_CLASS_OPTICAL_1G_LX; + goto ok_sfp_detect_class_by_1g_ethernet_4_check_br_10g; + } + if ((detect_val & 0x04) == 0x04) { /* 00000100 : 1000BASE-CX */ + speed_tmp = TRANSVR_CLASS_COPPER_L1_1G; + goto ok_sfp_detect_class_by_1g_ethernet_4_check_br_10g; + } + /* Case: 1000 Base-T (x1) */ + if ((detect_val & 0x08) == 0x08) { /* 00001000 : 1000BASE-T */ + return TRANSVR_CLASS_BASE_T_1000; + } + /* Case: 100 Base */ + if ( ((detect_val & 0x10) == 0x10) || /* 00010000 : 100BASE-LX/LX10 */ + ((detect_val & 0x20) == 0x20) || /* 00100000 : 100BASE-FX */ + ((detect_val & 0x40) == 0x40) || /* 01000000 : BASE-BX10 *3 */ + ((detect_val & 0x80) == 0x80) ){ /* 10000000 : BASE-PX *3 */ + return TRANSVR_CLASS_OPTICAL_100; + } + /* Case: ERROR */ + snprintf(err_str, sizeof(err_str), "Case:ERROR, value:%d", detect_val); + goto err_p_sfp_detect_class_by_1g_ethernet; + +ok_sfp_detect_class_by_1g_ethernet_4_check_br_10g: + switch (speed_br) { + case TRANSVR_CLASS_UNSPECIFIED: + case TRANSVR_CLASS_1G: + return speed_tmp; + case TRANSVR_CLASS_10G: + goto ok_sfp_detect_class_by_1g_ethernet_4_transfer_10G; + } + +ok_sfp_detect_class_by_1g_ethernet_4_transfer_10G: + switch (speed_tmp) { + case TRANSVR_CLASS_OPTICAL_1G_SX: + return TRANSVR_CLASS_OPTICAL_10G_S_SR; + case TRANSVR_CLASS_OPTICAL_1G_LX: + return TRANSVR_CLASS_OPTICAL_10G_S_LR; + case TRANSVR_CLASS_COPPER_L1_1G: + return TRANSVR_CLASS_COPPER_L1_10G; + default: + break; + } + snprintf(err_str, sizeof(err_str), "transfer_1to10 fail, speed:%d", speed_tmp); + goto err_p_sfp_detect_class_by_1g_ethernet; + +err_p_sfp_detect_class_by_1g_ethernet: + SWPS_INFO("%s: %s :%s", __func__, err_str, self->swp_name); + return TRANSVR_CLASS_ERROR; +} + + +int +_sfp_detect_class_by_feature(struct transvr_obj_s* self) { + /* Reference: SFF-8024 (v3.8) + */ + int is_active = 0; + int conn_val = DEBUG_TRANSVR_INT_VAL; + int check_val = DEBUG_TRANSVR_INT_VAL; + int wave_len = DEBUG_TRANSVR_INT_VAL; + int speed_val = DEBUG_TRANSVR_INT_VAL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + speed_val = _sfp_detect_if_sp_by_br(self); + conn_val = _sfp_get_connector_type(self); + + switch(conn_val) { + case 0x00: /* Unspecified */ + goto ok_sfp_detect_class_by_feature_4_check_active_passive; + case 0x07: /* LC (Lucent Connector) */ + case 0x0b: /* Optical Pigtail */ + case 0x0c: /* MPO 1x12 */ + case 0x0d: /* MPO 2x16 */ + /* + * ToDo: Need verify Optical Pigtail + */ + goto ok_sfp_detect_class_by_feature_4_optiocal; + case 0x21: /* Copper pigtail */ + /* + * ToDo: Need check ACC use case + */ + goto ok_sfp_detect_class_by_feature_4_check_active_passive; + case 0x23: /* No separable connector */ + /* + * ToDo: Standard not clear, not all transceiver vendor + * have the same defined + */ + goto ok_sfp_detect_class_by_feature_4_check_active_passive; + default: + break; + } + goto ok_sfp_detect_class_by_feature_4_unknow; + +ok_sfp_detect_class_by_feature_4_check_active_passive: + check_val = _sfp_get_cable_tech(self); + switch(check_val) { + case 0x00: /* Unspecified */ + goto ok_sfp_detect_class_by_feature_4_unknow; + case 0x04: /* Passive */ + goto ok_sfp_detect_class_by_feature_4_copper; + case 0x08: /* Active */ + is_active = 1; + goto ok_sfp_detect_class_by_feature_4_aoc; + default: + snprintf(err_msg, sizeof(err_msg), + "_sfp_get_cable_tech return Non define value:%d", + check_val); + break; + } + goto err_sfp_detect_class_by_feature_1; + +ok_sfp_detect_class_by_feature_4_optiocal: + wave_len = _common_count_wavelength(self, + self->wavelength[0], + self->wavelength[1]); + switch(speed_val) { + case TRANSVR_CLASS_25G: + switch (wave_len) { + case VAL_OPTICAL_WAVELENGTH_SR: + return TRANSVR_CLASS_OPTICAL_25G_SR; + case VAL_OPTICAL_WAVELENGTH_LR: + return TRANSVR_CLASS_OPTICAL_25G_LR; + case VAL_OPTICAL_WAVELENGTH_ER: + return TRANSVR_CLASS_OPTICAL_25G_ER; + default: + break; + } + return TRANSVR_CLASS_OPTICAL_25G; + + case TRANSVR_CLASS_10G: + switch (wave_len) { + case VAL_OPTICAL_WAVELENGTH_SR: + return TRANSVR_CLASS_OPTICAL_10G_S_SR; + case VAL_OPTICAL_WAVELENGTH_LR: + return TRANSVR_CLASS_OPTICAL_10G_S_LR; + case VAL_OPTICAL_WAVELENGTH_ER: + return TRANSVR_CLASS_OPTICAL_10G_S_ER; + default: + break; + } + return TRANSVR_CLASS_OPTICAL_10G; + + case TRANSVR_CLASS_1G: + switch (wave_len) { + case VAL_OPTICAL_WAVELENGTH_SR: + return TRANSVR_CLASS_OPTICAL_1G_SX; + case VAL_OPTICAL_WAVELENGTH_LR: + return TRANSVR_CLASS_OPTICAL_1G_LX; + case VAL_OPTICAL_WAVELENGTH_ER: + return TRANSVR_CLASS_OPTICAL_1G_EX; + default: + break; + } + return TRANSVR_CLASS_OPTICAL_1G; + + default: + return TRANSVR_CLASS_OPTICAL; + } + +ok_sfp_detect_class_by_feature_4_aoc: + switch(speed_val) { + case TRANSVR_CLASS_25G: + return TRANSVR_CLASS_OPTICAL_25G_AOC; + case TRANSVR_CLASS_10G: + return TRANSVR_CLASS_OPTICAL_10G_S_AOC; + case TRANSVR_CLASS_1G: + return TRANSVR_CLASS_OPTICAL_1G_AOC; + default: + break; + } + goto ok_sfp_detect_class_by_feature_4_unknow; + +ok_sfp_detect_class_by_feature_4_copper: + switch(speed_val) { + case TRANSVR_CLASS_25G: + return TRANSVR_CLASS_COPPER_L1_25G; + case TRANSVR_CLASS_10G: + return TRANSVR_CLASS_COPPER_L1_10G; + case TRANSVR_CLASS_1G: + return TRANSVR_CLASS_COPPER_L1_1G; + default: + return TRANSVR_CLASS_COPPER; + } + +ok_sfp_detect_class_by_feature_4_unknow: + return TRANSVR_CLASS_UNSPECIFIED; + +err_sfp_detect_class_by_feature_1: + SWPS_INFO("%s: %s\n :%s", __func__, err_msg, self->swp_name); + return TRANSVR_CLASS_ERROR; +} + + +int +sft_detect_transvr_class(struct transvr_obj_s* self) { + + int detect_val = DEBUG_TRANSVR_INT_VAL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + /* Check Extended Compliance */ + detect_val = _sfp_detect_class_by_extend_comp(self); + switch(detect_val) { + case TRANSVR_CLASS_UNSPECIFIED: + break; + case TRANSVR_CLASS_OPTICAL_25G_AOC: + case TRANSVR_CLASS_OPTICAL_25G_SR: + case TRANSVR_CLASS_OPTICAL_25G_LR: + case TRANSVR_CLASS_OPTICAL_25G_ER: + case TRANSVR_CLASS_COPPER_L1_25G: + return detect_val; + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined extend_comp:%d", + detect_val); + goto err_sft_detect_transceiver_class_1; + } + /* Check 10G Compliance */ + detect_val = _sfp_detect_class_by_10_ethernet(self); + switch(detect_val) { + case TRANSVR_CLASS_UNSPECIFIED: + break; + case TRANSVR_CLASS_OPTICAL_10G_S_SR: + case TRANSVR_CLASS_OPTICAL_10G_S_LR: + case TRANSVR_CLASS_OPTICAL_10G_S_ER: + return detect_val; + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined 10G_eth:%d", + detect_val); + goto err_sft_detect_transceiver_class_1; + } + /* Check 1G Compliance */ + detect_val = _sfp_detect_class_by_1g_ethernet(self); + switch(detect_val) { + case TRANSVR_CLASS_UNSPECIFIED: + break; + case TRANSVR_CLASS_OPTICAL_1G_SX: + case TRANSVR_CLASS_OPTICAL_1G_LX: + case TRANSVR_CLASS_COPPER_L1_1G: + case TRANSVR_CLASS_BASE_T_1000: + case TRANSVR_CLASS_OPTICAL_100: + /* + * ToDo: Need Check 0.1G + */ + case TRANSVR_CLASS_OPTICAL_10G_S_SR: + case TRANSVR_CLASS_OPTICAL_10G_S_LR: + case TRANSVR_CLASS_COPPER_L1_10G: + /* Transfer speed case + * => Example: Raycom 10G DAC + */ + return detect_val; + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined 1G_eth:%d", + detect_val); + goto err_sft_detect_transceiver_class_1; + } + /* Check by connector, br, wavelength */ + detect_val = _sfp_detect_class_by_feature(self); + switch(detect_val) { + case TRANSVR_CLASS_UNSPECIFIED: + break; + case TRANSVR_CLASS_OPTICAL: + case TRANSVR_CLASS_OPTICAL_1G: + case TRANSVR_CLASS_OPTICAL_1G_SX: + case TRANSVR_CLASS_OPTICAL_1G_LX: + case TRANSVR_CLASS_OPTICAL_1G_EX: + case TRANSVR_CLASS_OPTICAL_1G_AOC: + case TRANSVR_CLASS_OPTICAL_10G: + case TRANSVR_CLASS_OPTICAL_10G_S_SR: + case TRANSVR_CLASS_OPTICAL_10G_S_LR: + case TRANSVR_CLASS_OPTICAL_10G_S_ER: + case TRANSVR_CLASS_OPTICAL_10G_S_AOC: + case TRANSVR_CLASS_OPTICAL_25G: + case TRANSVR_CLASS_OPTICAL_25G_SR: + case TRANSVR_CLASS_OPTICAL_25G_LR: + case TRANSVR_CLASS_OPTICAL_25G_ER: + case TRANSVR_CLASS_OPTICAL_25G_AOC: + case TRANSVR_CLASS_COPPER: + case TRANSVR_CLASS_COPPER_L1_1G: + case TRANSVR_CLASS_COPPER_L1_10G: + case TRANSVR_CLASS_COPPER_L1_25G: + return detect_val; + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined get_connector:%d", + detect_val); + goto err_sft_detect_transceiver_class_1; + } + /* Exception case: Can't verify */ + snprintf(err_msg, sizeof(err_msg), "Can not identify!"); + goto err_sft_detect_transceiver_class_1; + +err_sft_detect_transceiver_class_1: + SWPS_INFO("%s: %s :%s\n", __func__, err_msg, self->swp_name); + return TRANSVR_CLASS_ERROR; +} + + +int +_sfp_set_trident2_if_type(struct transvr_obj_s* self, + int transvr_cls, + char *result){ + + int lmax = 8; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + switch(transvr_cls) { + case TRANSVR_CLASS_ERROR: + case TRANSVR_CLASS_UNSPECIFIED: + break; + /* 25G OPTICAL */ + case TRANSVR_CLASS_OPTICAL_25G_AOC: + case TRANSVR_CLASS_OPTICAL_25G_SR: + case TRANSVR_CLASS_OPTICAL_25G_LR: + case TRANSVR_CLASS_OPTICAL_25G_ER: + case TRANSVR_CLASS_OPTICAL_25G: + return snprintf(result, lmax, TRANSVR_IF_SFI); + /* 25G COPPER */ + case TRANSVR_CLASS_COPPER_L1_25G: + return snprintf(result, lmax, TRANSVR_IF_SFI); + /* 10G OPTICAL */ + case TRANSVR_CLASS_OPTICAL_10G_S_AOC: + case TRANSVR_CLASS_OPTICAL_10G_S_SR: + case TRANSVR_CLASS_OPTICAL_10G_S_LR: + case TRANSVR_CLASS_OPTICAL_10G_S_ER: + case TRANSVR_CLASS_OPTICAL_10G: + return snprintf(result, lmax, TRANSVR_IF_SFI); + /* 10G COPPER */ + case TRANSVR_CLASS_COPPER_L1_10G: + return snprintf(result, lmax, TRANSVR_IF_SFI); + /* 1G OPTICAL */ + case TRANSVR_CLASS_OPTICAL_1G_AOC: + case TRANSVR_CLASS_OPTICAL_1G_SX: + case TRANSVR_CLASS_OPTICAL_1G_LX: + case TRANSVR_CLASS_OPTICAL_1G_EX: + case TRANSVR_CLASS_OPTICAL_1G: + return snprintf(result, lmax, TRANSVR_IF_IF_GMII); + /* 1G COPPER */ + case TRANSVR_CLASS_COPPER_L1_1G: + return snprintf(result, lmax, TRANSVR_IF_IF_GMII); + /* 1G BASE_T */ + case TRANSVR_CLASS_BASE_T_1000: + return snprintf(result, lmax, TRANSVR_IF_IF_GMII); + /* 100 Base */ + case TRANSVR_CLASS_OPTICAL_100: + return snprintf(result, lmax, TRANSVR_IF_IF_GMII); + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined value:%d", + transvr_cls); + goto err_sfp_set_trident2_if_type_1; + } + /* Exception case: Can't verify */ + snprintf(err_msg, sizeof(err_msg), "Can not identify!"); + goto err_sfp_set_trident2_if_type_1; + +err_sfp_set_trident2_if_type_1: + snprintf(result, lmax, TRANSVR_UEVENT_UNKNOW); + SWPS_INFO("%s: %s :%s\n", __func__, err_msg, self->swp_name); + return ERR_TRANSVR_ABNORMAL; +} + + +int +_sfp_set_tomahawk_if_type(struct transvr_obj_s* self, + int transvr_cls, + char *result) { + + int lmax = 8; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + switch(transvr_cls) { + case TRANSVR_CLASS_ERROR: + case TRANSVR_CLASS_UNSPECIFIED: + break; + /* 25G OPTICAL */ + case TRANSVR_CLASS_OPTICAL_25G_AOC: + case TRANSVR_CLASS_OPTICAL_25G_SR: + case TRANSVR_CLASS_OPTICAL_25G_LR: + case TRANSVR_CLASS_OPTICAL_25G_ER: + case TRANSVR_CLASS_OPTICAL_25G: + return snprintf(result, lmax, TRANSVR_IF_SR); + /* 25G COPPER */ + case TRANSVR_CLASS_COPPER_L1_25G: + return snprintf(result, lmax, TRANSVR_IF_KR); + /* 10G OPTICAL */ + case TRANSVR_CLASS_OPTICAL_10G_S_AOC: + case TRANSVR_CLASS_OPTICAL_10G_S_SR: + case TRANSVR_CLASS_OPTICAL_10G_S_LR: + case TRANSVR_CLASS_OPTICAL_10G_S_ER: + case TRANSVR_CLASS_OPTICAL_10G: + return snprintf(result, lmax, TRANSVR_IF_SFI); + /* 10G COPPER */ + case TRANSVR_CLASS_COPPER_L1_10G: + return snprintf(result, lmax, TRANSVR_IF_SFI); + /* 1G OPTICAL */ + case TRANSVR_CLASS_OPTICAL_1G_AOC: + case TRANSVR_CLASS_OPTICAL_1G_SX: + case TRANSVR_CLASS_OPTICAL_1G_LX: + case TRANSVR_CLASS_OPTICAL_1G_EX: + case TRANSVR_CLASS_OPTICAL_1G: + return snprintf(result, lmax, TRANSVR_IF_IF_GMII); + /* 1G COPPER */ + case TRANSVR_CLASS_COPPER_L1_1G: + return snprintf(result, lmax, TRANSVR_IF_IF_GMII); + /* 1G BASE_T */ + case TRANSVR_CLASS_BASE_T_1000: + return snprintf(result, lmax, TRANSVR_IF_IF_GMII); + /* 100 Base */ + case TRANSVR_CLASS_OPTICAL_100: + return snprintf(result, lmax, TRANSVR_IF_IF_GMII); + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined value:%d", + transvr_cls); + goto err_sfp_set_tomahawk_if_type_1; + } + /* Exception case: Can't verify */ + snprintf(err_msg, sizeof(err_msg), "Can not identify!"); + goto err_sfp_set_tomahawk_if_type_1; + +err_sfp_set_tomahawk_if_type_1: + snprintf(result, lmax, TRANSVR_UEVENT_UNKNOW); + SWPS_INFO("%s: %s\n :%s", __func__, err_msg, self->swp_name); + return ERR_TRANSVR_ABNORMAL; +} + + +int +_sfp_detect_if_type(struct transvr_obj_s* self, + char *result){ + + int lmax = 8; + int detect_cls = DEBUG_TRANSVR_INT_VAL; + + detect_cls = sft_detect_transvr_class(self); + switch (self->chipset_type) { + case BCM_CHIP_TYPE_TRIDENT_2: + return _sfp_set_trident2_if_type(self, detect_cls, result); + + case BCM_CHIP_TYPE_TOMAHAWK: + return _sfp_set_tomahawk_if_type(self, detect_cls, result); + + default: + SWPS_INFO("%s: non-defined chipset_type:%d :%s\n", + __func__, self->chipset_type, self->swp_name); + break; + } + snprintf(result, lmax, TRANSVR_UEVENT_UNKNOW); + return ERR_TRANSVR_ABNORMAL; +} + + +int +sfp_get_if_type(struct transvr_obj_s *self, + char *buf_p){ + + int lmax = 16; + char tmp_result[16] = DEBUG_TRANSVR_STR_VAL; + + if (self->state != STATE_TRANSVR_CONNECTED) { + return snprintf(buf_p, lmax, "%d\n", self->state); + } + if (_sfp_detect_if_type(self, tmp_result) < 0) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_ABNORMAL); + } + return snprintf(buf_p, lmax, "%s\n", tmp_result); +} + + +int +_sfp_detect_if_speed(struct transvr_obj_s* self, + char *result){ + + int lmax = 16; + int detect_val = DEBUG_TRANSVR_INT_VAL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + detect_val = sft_detect_transvr_class(self); + switch(detect_val) { + case TRANSVR_CLASS_ERROR: + case TRANSVR_CLASS_UNSPECIFIED: + break; + /* 25G OPTICAL */ + case TRANSVR_CLASS_OPTICAL_25G_AOC: + case TRANSVR_CLASS_OPTICAL_25G_SR: + case TRANSVR_CLASS_OPTICAL_25G_LR: + case TRANSVR_CLASS_OPTICAL_25G_ER: + case TRANSVR_CLASS_OPTICAL_25G: + return snprintf(result, lmax, TRANSVR_IF_SP_25G); + /* 25G COPPER */ + case TRANSVR_CLASS_COPPER_L1_25G: + return snprintf(result, lmax, TRANSVR_IF_SP_25G); + /* 10G OPTICAL */ + case TRANSVR_CLASS_OPTICAL_10G_S_AOC: + case TRANSVR_CLASS_OPTICAL_10G_S_SR: + case TRANSVR_CLASS_OPTICAL_10G_S_LR: + case TRANSVR_CLASS_OPTICAL_10G_S_ER: + case TRANSVR_CLASS_OPTICAL_10G: + return snprintf(result, lmax, TRANSVR_IF_SP_10G); + /* 10G COPPER */ + case TRANSVR_CLASS_COPPER_L1_10G: + return snprintf(result, lmax, TRANSVR_IF_SP_10G); + /* 1G OPTICAL */ + case TRANSVR_CLASS_OPTICAL_1G_AOC: + case TRANSVR_CLASS_OPTICAL_1G_SX: + case TRANSVR_CLASS_OPTICAL_1G_LX: + case TRANSVR_CLASS_OPTICAL_1G_EX: + case TRANSVR_CLASS_OPTICAL_1G: + return snprintf(result, lmax, TRANSVR_IF_SP_1G); + /* 1G COPPER */ + case TRANSVR_CLASS_COPPER_L1_1G: + return snprintf(result, lmax, TRANSVR_IF_SP_1G); + /* 1G BASE_T */ + case TRANSVR_CLASS_BASE_T_1000: + return snprintf(result, lmax, TRANSVR_IF_SP_1G); + /* 100 Base */ + case TRANSVR_CLASS_OPTICAL_100: + return snprintf(result, lmax, TRANSVR_IF_SP_100); + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined value:%d", + detect_val); + goto err_sfp_detect_if_speed_1; + } + /* Check by BR */ + detect_val = _sfp_detect_if_sp_by_br(self); + switch (detect_val) { + case TRANSVR_CLASS_25G: + return snprintf(result, lmax, TRANSVR_IF_SP_25G); + case TRANSVR_CLASS_10G: + return snprintf(result, lmax, TRANSVR_IF_SP_10G); + case TRANSVR_CLASS_1G: + return snprintf(result, lmax, TRANSVR_IF_SP_1G); + default: + break; + } + /* Exception case: Can't verify */ + snprintf(err_msg, sizeof(err_msg), "Can not identify!"); + goto err_sfp_detect_if_speed_1; + +err_sfp_detect_if_speed_1: + snprintf(result, lmax, TRANSVR_UEVENT_UNKNOW); + SWPS_INFO("%s %s\n :%s", __func__, err_msg, self->swp_name); + return ERR_TRANSVR_ABNORMAL; +} + + +int +sfp_get_if_speed(struct transvr_obj_s *self, + char *buf_p){ + + int lmax = 16; + char tmp_result[16] = DEBUG_TRANSVR_STR_VAL; + + if (self->state != STATE_TRANSVR_CONNECTED) { + return snprintf(buf_p, lmax, "%d\n", self->state); + } + if (_sfp_detect_if_speed(self, tmp_result) < 0) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_ABNORMAL); + } + return snprintf(buf_p, lmax, "%s\n", tmp_result); +} + + +int +_qsfp_detect_class_by_extend_comp(struct transvr_obj_s* self) { + /* Reference: SFF-8024 (v3.8) + */ + int detect_val = DEBUG_TRANSVR_INT_VAL; + + detect_val = _qsfp_get_comp_extended(self); + switch(detect_val) { + case 0x00: /* Unspecified */ + return TRANSVR_CLASS_UNSPECIFIED; + + case 0x01: /* 100G AOC (Active Optical Cable) or 25GAUI C2M */ + case 0x18: /* 100G AOC or 25GAUI C2M AOC. */ + return TRANSVR_CLASS_OPTICAL_100G_AOC; + + case 0x06: /* 100G CWDM4 */ + case 0x09: /* Obsolete (assigned before 100G CWDM4 MSA required FEC) */ + case 0x17: /* 100G CLR4 */ + case 0x1A: /* 100GE-DWDM2 */ + return TRANSVR_CLASS_OPTICAL_100G; + + case 0x02: /* 100GBASE-SR4 or 25GBASE-SR */ + return TRANSVR_CLASS_OPTICAL_100G_SR4; + + case 0x03: /* 100GBASE-LR4 or 25GBASE-LR */ + return TRANSVR_CLASS_OPTICAL_100G_LR4; + + case 0x04: /* 100GBASE-ER4 or 25GBASE-ER */ + return TRANSVR_CLASS_OPTICAL_100G_ER4; + + case 0x07: /* 100G PSM4 Parallel SMF */ + return TRANSVR_CLASS_OPTICAL_100G_PSM4; + + case 0x12: /* 40G PSM4 Parallel SMF */ + return TRANSVR_CLASS_OPTICAL_40G; + + case 0x11: /* 4 x 10GBASE-SR */ + return TRANSVR_CLASS_OPTICAL_40G_SR4; + + case 0x10: /* 40GBASE-ER4 */ + return TRANSVR_CLASS_OPTICAL_40G_ER4; + + case 0x08: /* 100G ACC (Active Copper Cable) or 25GAUI C2M ACC. */ + case 0x0b: /* 100GBASE-CR4 or 25GBASE-CR CA-L */ + case 0x19: /* 100G ACC or 25GAUI C2M ACC. */ + return TRANSVR_CLASS_COPPER_L4_100G; + + default: + break; + } + SWPS_INFO("%s: Unexcept value:0x%02x\n :%s", + __func__, detect_val, self->swp_name); + return TRANSVR_CLASS_ERROR; +} + + +int +_qsfp_detect_class_by_10_40_100_ethernet(struct transvr_obj_s* self) { + /* Reference: SFF-8472 (v12.2) + */ + int detect_val = DEBUG_TRANSVR_INT_VAL; + + detect_val = _qsfp_get_comp_10_40_100_ethernet(self); + /* Case: Unspecified */ + if (detect_val == 0x00) { + return TRANSVR_CLASS_UNSPECIFIED; + } + /* Case: 40G Optical */ + if ((detect_val & 0x01) == 0x01) { /* 00000001 : 40G Active Cable (XLPPI) */ + return TRANSVR_CLASS_OPTICAL_40G_AOC; + } + if ((detect_val & 0x04) == 0x04) { /* 00000100 : 40GBASE-SR4 */ + return TRANSVR_CLASS_OPTICAL_40G_SR4; + } + if ( (detect_val & 0x02) == 0x02) { /* 00000010 : 40GBASE-LR4 */ + return TRANSVR_CLASS_OPTICAL_40G_LR4; + } + if ( (detect_val & 0x08) == 0x08) { /* 00001000 : 40GBASE-CR4 */ + return TRANSVR_CLASS_COPPER_L4_40G; + } + /* Case: 10G Optical */ + if ( (detect_val & 0x10) == 0x10) { /* 00010000 : 10GBASE-SR */ + return TRANSVR_CLASS_OPTICAL_10G_Q_SR; + } + if ( ((detect_val & 0x20) == 0x20) || /* 00100000 : 10GBASE-LR */ + ((detect_val & 0x40) == 0x40) ){ /* 01000000 : 10GBASE-LRM */ + return TRANSVR_CLASS_OPTICAL_10G_Q_LR; + } + /* Case: Extend Compliance */ + if ( ((detect_val & 0x80) == 0x80) ){ /* 10000000 : Use Extend Compliance */ + return TRANSVR_CLASS_EXTEND_COMP; + } + /* Case: ERROR */ + SWPS_INFO("%s: Unexcept value:0x%02x\n :%s", + __func__, detect_val, self->swp_name); + return TRANSVR_CLASS_ERROR; +} + + +int +_qsfp_detect_if_sp_by_br(struct transvr_obj_s* self) { + + int lower_bound_10g = 0x10; + int upper_bound_10g = 0x25; + int lower_bound_40g = 0x60; + int upper_bound_40g = 0x75; + int lower_bound_100g = 0x60; + int upper_bound_100g = 0x75; + int used_extend_br = 0xff; + int notmal_br = DEBUG_TRANSVR_INT_VAL; + int extend_br = DEBUG_TRANSVR_INT_VAL; + + notmal_br = (int)(self->br); /* updated by update_all() */ + /* Check 40G */ + if ((notmal_br >= lower_bound_40g) && + (notmal_br <= upper_bound_40g) ) { + return TRANSVR_CLASS_40G; + } + /* Check 100G */ + if (notmal_br == used_extend_br) { + extend_br = (int)(self->extbr); /* updated by update_all() */ + if ((extend_br >= lower_bound_100g) && + (extend_br <= upper_bound_100g) ) { + return TRANSVR_CLASS_100G; + } + } + /* Check 10G */ + if ((notmal_br >= lower_bound_10g) && + (notmal_br <= upper_bound_10g) ) { + return TRANSVR_CLASS_10G; + } + return TRANSVR_CLASS_UNSPECIFIED; +} + + +int +_qsfp_detect_class_by_feature(struct transvr_obj_s* self) { + /* Reference: SFF-8024 (v3.8) + */ + int conn_val = DEBUG_TRANSVR_INT_VAL; + int wave_len = DEBUG_TRANSVR_INT_VAL; + int speed_val = DEBUG_TRANSVR_INT_VAL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + speed_val = _qsfp_detect_if_sp_by_br(self); + conn_val = _qsfp_get_connector_type(self); + + switch(conn_val) { + case 0x00: /* Unspecified */ + return TRANSVR_CLASS_UNSPECIFIED; + case 0x07: /* LC (Lucent Connector) */ + case 0x0b: /* Optical Pigtail */ + case 0x0c: /* MPO 1x12 (Multifiber Parallel Optic) */ + case 0x0d: /* MPO 2x16 */ + goto ok_qsfp_detect_class_by_feature_4_optiocal; + case 0x21: /* Copper pigtail */ + goto ok_qsfp_detect_class_by_feature_4_copper; + case 0x23: /* No separable connector */ + if ((_qsfp_get_comp_fc_link_length(self) > 0) || + (_qsfp_get_comp_fc_trans_tech(self) > 0) || + (_qsfp_get_comp_fc_trans_media(self) > 0) || + (_qsfp_get_comp_fc_speed(self) > 0) ) { + goto ok_qsfp_detect_class_by_feature_4_aoc; + } + goto ok_qsfp_detect_class_by_feature_4_copper; + default: + snprintf(err_msg, sizeof(err_msg), + "_qsfp_get_connector_type return Non define value:%d", + conn_val); + goto err_qsfp_detect_class_by_feature_1; + } + return TRANSVR_CLASS_UNSPECIFIED; + +ok_qsfp_detect_class_by_feature_4_optiocal: + wave_len = _common_count_wavelength(self, + self->wavelength[0], + self->wavelength[1]); + switch(speed_val) { + case TRANSVR_CLASS_100G: + switch (wave_len) { + case VAL_OPTICAL_WAVELENGTH_SR: + return TRANSVR_CLASS_OPTICAL_100G_SR4; + case VAL_OPTICAL_WAVELENGTH_LR: + return TRANSVR_CLASS_OPTICAL_100G_LR4; + case VAL_OPTICAL_WAVELENGTH_ER: + return TRANSVR_CLASS_OPTICAL_100G_ER4; + default: + break; + } + return TRANSVR_CLASS_OPTICAL_100G; + + case TRANSVR_CLASS_40G: + switch (wave_len) { + case VAL_OPTICAL_WAVELENGTH_SR: + return TRANSVR_CLASS_OPTICAL_40G_SR4; + case VAL_OPTICAL_WAVELENGTH_LR: + return TRANSVR_CLASS_OPTICAL_40G_LR4; + case VAL_OPTICAL_WAVELENGTH_ER: + return TRANSVR_CLASS_OPTICAL_40G_ER4; + default: + break; + } + return TRANSVR_CLASS_OPTICAL_40G; + + case TRANSVR_CLASS_10G: + switch (wave_len) { + case VAL_OPTICAL_WAVELENGTH_SR: + return TRANSVR_CLASS_OPTICAL_10G_Q_SR; + case VAL_OPTICAL_WAVELENGTH_LR: + return TRANSVR_CLASS_OPTICAL_10G_Q_LR; + case VAL_OPTICAL_WAVELENGTH_ER: + return TRANSVR_CLASS_OPTICAL_10G_Q_ER; + default: + break; + } + return TRANSVR_CLASS_OPTICAL_10G; + + default: + return TRANSVR_CLASS_OPTICAL; + } + +ok_qsfp_detect_class_by_feature_4_aoc: + switch(speed_val) { + case TRANSVR_CLASS_100G: + return TRANSVR_CLASS_OPTICAL_100G_AOC; + case TRANSVR_CLASS_40G: + return TRANSVR_CLASS_OPTICAL_40G_AOC; + case TRANSVR_CLASS_10G: + return TRANSVR_CLASS_OPTICAL_10G_Q_AOC; + default: + return TRANSVR_CLASS_OPTICAL; + } + +ok_qsfp_detect_class_by_feature_4_copper: + switch(speed_val) { + case TRANSVR_CLASS_100G: + return TRANSVR_CLASS_COPPER_L4_100G; + case TRANSVR_CLASS_40G: + return TRANSVR_CLASS_COPPER_L4_40G; + case TRANSVR_CLASS_10G: + return TRANSVR_CLASS_COPPER_L4_10G; + default: + return TRANSVR_CLASS_COPPER; + } + +err_qsfp_detect_class_by_feature_1: + SWPS_INFO("%s: %s\n :%s", + __func__, err_msg, self->swp_name); + return TRANSVR_CLASS_ERROR; +} + + +int +qsft_detect_transvr_class(struct transvr_obj_s* self) { + + int detect_val = DEBUG_TRANSVR_INT_VAL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + /* Check Extended Compliance */ + detect_val = _qsfp_detect_class_by_extend_comp(self); + switch (detect_val) { + case TRANSVR_CLASS_UNSPECIFIED: + break; + case TRANSVR_CLASS_OPTICAL_100G: + case TRANSVR_CLASS_OPTICAL_100G_AOC: + case TRANSVR_CLASS_OPTICAL_100G_SR4: + case TRANSVR_CLASS_OPTICAL_100G_LR4: + case TRANSVR_CLASS_OPTICAL_100G_ER4: + case TRANSVR_CLASS_OPTICAL_100G_PSM4: + case TRANSVR_CLASS_OPTICAL_40G: + case TRANSVR_CLASS_OPTICAL_40G_AOC: + case TRANSVR_CLASS_OPTICAL_40G_SR4: + case TRANSVR_CLASS_OPTICAL_40G_LR4: + case TRANSVR_CLASS_OPTICAL_40G_ER4: + case TRANSVR_CLASS_COPPER_L4_100G: + return detect_val; + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined extend_comp:%d", + detect_val); + goto err_qsft_detect_transvr_class_1; + } + /* Check 10/40G/100G Ethernet Compliance */ + detect_val = _qsfp_detect_class_by_10_40_100_ethernet(self); + switch(detect_val) { + case TRANSVR_CLASS_UNSPECIFIED: + break; + case TRANSVR_CLASS_OPTICAL_40G_AOC: + case TRANSVR_CLASS_OPTICAL_40G_SR4: + case TRANSVR_CLASS_OPTICAL_40G_LR4: + case TRANSVR_CLASS_OPTICAL_10G_Q_SR: /* Need Check: SR4 or SR */ + case TRANSVR_CLASS_OPTICAL_10G_Q_LR: /* Need Check: SR4 or SR */ + case TRANSVR_CLASS_COPPER_L4_40G: + return detect_val; + case TRANSVR_CLASS_EXTEND_COMP: + /* Format incorrect case (We already checked the Extend + * Compliance is 0 + */ + snprintf(err_msg, sizeof(err_msg), + "Transceiver format incorrect"); + goto err_qsft_detect_transvr_class_1; + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined 10/40/100:%d", + detect_val); + goto err_qsft_detect_transvr_class_1; + } + /* Check by Connector type, BR and wavelength */ + detect_val = _qsfp_detect_class_by_feature(self); + switch (detect_val) { + case TRANSVR_CLASS_UNSPECIFIED: + break; + case TRANSVR_CLASS_OPTICAL_100G_ER4: + case TRANSVR_CLASS_OPTICAL_100G_LR4: + case TRANSVR_CLASS_OPTICAL_100G_SR4: + case TRANSVR_CLASS_OPTICAL_100G_AOC: + case TRANSVR_CLASS_OPTICAL_100G: + case TRANSVR_CLASS_OPTICAL_40G_ER4: + case TRANSVR_CLASS_OPTICAL_40G_LR4: + case TRANSVR_CLASS_OPTICAL_40G_SR4: + case TRANSVR_CLASS_OPTICAL_40G_AOC: + case TRANSVR_CLASS_OPTICAL_40G: + case TRANSVR_CLASS_OPTICAL_10G_Q_ER: + case TRANSVR_CLASS_OPTICAL_10G_Q_LR: + case TRANSVR_CLASS_OPTICAL_10G_Q_SR: + case TRANSVR_CLASS_OPTICAL_10G_Q_AOC: + case TRANSVR_CLASS_OPTICAL_10G: + case TRANSVR_CLASS_OPTICAL: + case TRANSVR_CLASS_COPPER_L4_100G: + case TRANSVR_CLASS_COPPER_L4_40G: + case TRANSVR_CLASS_COPPER_L4_10G: + case TRANSVR_CLASS_COPPER: + return detect_val; + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined connector:%d", + detect_val); + goto err_qsft_detect_transvr_class_1; + } + /* Exception case: Can't verify */ + snprintf(err_msg, sizeof(err_msg), + "Can not identify!"); + goto err_qsft_detect_transvr_class_1; + +err_qsft_detect_transvr_class_1: + SWPS_INFO("%s: %s\n :%s", __func__, err_msg, self->swp_name); + return TRANSVR_CLASS_ERROR; +} + + +int +_qsfp_set_trident2_if_type(struct transvr_obj_s* self, + int transvr_cls, + char *result){ + + int lmax = 8; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + switch (transvr_cls) { + case TRANSVR_CLASS_UNSPECIFIED: + case TRANSVR_CLASS_ERROR: + break; + /* 100G Optical */ + case TRANSVR_CLASS_OPTICAL_100G: + case TRANSVR_CLASS_OPTICAL_100G_AOC: + case TRANSVR_CLASS_OPTICAL_100G_SR4: + case TRANSVR_CLASS_OPTICAL_100G_LR4: + case TRANSVR_CLASS_OPTICAL_100G_ER4: + case TRANSVR_CLASS_OPTICAL_100G_PSM4: + return snprintf(result, lmax, TRANSVR_IF_SR4); + /* 100G Copper */ + case TRANSVR_CLASS_COPPER_L4_100G: + return snprintf(result, lmax, TRANSVR_IF_KR4); + /* 40G Optical */ + case TRANSVR_CLASS_OPTICAL_40G: + case TRANSVR_CLASS_OPTICAL_40G_AOC: + case TRANSVR_CLASS_OPTICAL_40G_SR4: + case TRANSVR_CLASS_OPTICAL_40G_LR4: + case TRANSVR_CLASS_OPTICAL_40G_ER4: + return snprintf(result, lmax, TRANSVR_IF_IF_XGMII); + /* 40G Copper */ + case TRANSVR_CLASS_COPPER_L4_40G: + return snprintf(result, lmax, TRANSVR_IF_IF_XGMII); + /* 10G Optical */ + case TRANSVR_CLASS_OPTICAL_10G: + case TRANSVR_CLASS_OPTICAL_10G_Q_AOC: + case TRANSVR_CLASS_OPTICAL_10G_Q_SR: /* Need Check: SR4 or SR */ + case TRANSVR_CLASS_OPTICAL_10G_Q_LR: /* Need Check: LR4 or LR */ + case TRANSVR_CLASS_OPTICAL_10G_Q_ER: /* Need Check: ER4 or ER */ + return snprintf(result, lmax, TRANSVR_IF_IF_XGMII); + /* Optical */ + case TRANSVR_CLASS_OPTICAL: + return snprintf(result, lmax, TRANSVR_IF_IF_XGMII); + /* Copper */ + case TRANSVR_CLASS_COPPER: + return snprintf(result, lmax, TRANSVR_IF_IF_XGMII); + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined value:%d", + transvr_cls); + goto err_qsfp_set_trident2_if_type_1; + } + /* Exception case: Can't verify */ + snprintf(err_msg, sizeof(err_msg), "Can not identify!"); + goto err_qsfp_set_trident2_if_type_1; + +err_qsfp_set_trident2_if_type_1: + snprintf(result, lmax, TRANSVR_UEVENT_UNKNOW); + SWPS_INFO("%s: %s\n :%s", __func__, err_msg, self->swp_name); + return ERR_TRANSVR_ABNORMAL; +} + + +int +_qsfp_set_tomahawk_if_type(struct transvr_obj_s* self, + int transvr_cls, + char *result){ + + int lmax = 8; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + switch (transvr_cls) { + case TRANSVR_CLASS_UNSPECIFIED: + case TRANSVR_CLASS_ERROR: + break; + /* 100G Optical */ + case TRANSVR_CLASS_OPTICAL_100G: + case TRANSVR_CLASS_OPTICAL_100G_AOC: + case TRANSVR_CLASS_OPTICAL_100G_SR4: + case TRANSVR_CLASS_OPTICAL_100G_LR4: + case TRANSVR_CLASS_OPTICAL_100G_ER4: + case TRANSVR_CLASS_OPTICAL_100G_PSM4: + return snprintf(result, lmax, TRANSVR_IF_SR4); + /* 100G Copper */ + case TRANSVR_CLASS_COPPER_L4_100G: + return snprintf(result, lmax, TRANSVR_IF_KR4); + /* 40G Optical */ + case TRANSVR_CLASS_OPTICAL_40G: + case TRANSVR_CLASS_OPTICAL_40G_AOC: + case TRANSVR_CLASS_OPTICAL_40G_SR4: + case TRANSVR_CLASS_OPTICAL_40G_LR4: + case TRANSVR_CLASS_OPTICAL_40G_ER4: + return snprintf(result, lmax, TRANSVR_IF_SR4); + /* 40G Copper */ + case TRANSVR_CLASS_COPPER_L4_40G: + return snprintf(result, lmax, TRANSVR_IF_KR4); + /* 10G Optical */ + case TRANSVR_CLASS_OPTICAL_10G: + case TRANSVR_CLASS_OPTICAL_10G_Q_AOC: + case TRANSVR_CLASS_OPTICAL_10G_Q_SR: /* Need Check: SR4 or SR */ + case TRANSVR_CLASS_OPTICAL_10G_Q_LR: /* Need Check: SR4 or SR */ + case TRANSVR_CLASS_OPTICAL_10G_Q_ER: + return snprintf(result, lmax, TRANSVR_IF_SR4); + /* Optical */ + case TRANSVR_CLASS_OPTICAL: + return snprintf(result, lmax, TRANSVR_IF_SR4); + /* Copper */ + case TRANSVR_CLASS_COPPER: + return snprintf(result, lmax, TRANSVR_IF_KR4); + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined value:%d", + transvr_cls); + goto err_qsfp_set_trident2_if_type_1; + } + /* Exception case: Can't verify */ + snprintf(err_msg, sizeof(err_msg), "Can not identify!"); + goto err_qsfp_set_trident2_if_type_1; + +err_qsfp_set_trident2_if_type_1: + snprintf(result, lmax, TRANSVR_UEVENT_UNKNOW); + SWPS_INFO("%s: %s\n :%s", __func__, err_msg, self->swp_name); + return ERR_TRANSVR_ABNORMAL; +} + + +int +_qsfp_detect_if_type(struct transvr_obj_s* self, + char *result){ + + int lmax = 8; + int detect_cls = DEBUG_TRANSVR_INT_VAL; + + detect_cls = qsft_detect_transvr_class(self); + switch (self->chipset_type) { + case BCM_CHIP_TYPE_TRIDENT_2: + return _qsfp_set_trident2_if_type(self, detect_cls, result); + + case BCM_CHIP_TYPE_TOMAHAWK: + return _qsfp_set_tomahawk_if_type(self, detect_cls, result); + + default: + SWPS_INFO("%s: non-defined chipset_type:%d :%s\n", + __func__, self->chipset_type, self->swp_name); + break; + } + snprintf(result, lmax, TRANSVR_UEVENT_UNKNOW); + return ERR_TRANSVR_ABNORMAL; +} + + +int +qsfp_get_if_type(struct transvr_obj_s *self, + char *buf_p){ + + int lmax = 8; + char tmp_result[8] = DEBUG_TRANSVR_STR_VAL; + + if (self->state != STATE_TRANSVR_CONNECTED) { + return snprintf(buf_p, lmax, "%d\n", self->state); + } + if (_qsfp_detect_if_type(self, tmp_result) < 0) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_ABNORMAL); + } + return snprintf(buf_p, lmax, "%s\n", tmp_result); +} + + +int +_qsfp_detect_if_speed(struct transvr_obj_s* self, + char *result){ + int lmax = 16; + int detect_val = DEBUG_TRANSVR_INT_VAL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + detect_val = qsft_detect_transvr_class(self); + switch (detect_val) { + case TRANSVR_CLASS_UNSPECIFIED: + case TRANSVR_CLASS_ERROR: + break; + /* 100G Optical */ + case TRANSVR_CLASS_OPTICAL_100G: + case TRANSVR_CLASS_OPTICAL_100G_AOC: + case TRANSVR_CLASS_OPTICAL_100G_SR4: + case TRANSVR_CLASS_OPTICAL_100G_LR4: + case TRANSVR_CLASS_OPTICAL_100G_ER4: + case TRANSVR_CLASS_OPTICAL_100G_PSM4: + return snprintf(result, lmax, TRANSVR_IF_SP_100G); + /* 100G Copper */ + case TRANSVR_CLASS_COPPER_L4_100G: + return snprintf(result, lmax, TRANSVR_IF_SP_100G); + /* 40G Optical */ + case TRANSVR_CLASS_OPTICAL_40G: + case TRANSVR_CLASS_OPTICAL_40G_AOC: + case TRANSVR_CLASS_OPTICAL_40G_SR4: + case TRANSVR_CLASS_OPTICAL_40G_LR4: + case TRANSVR_CLASS_OPTICAL_40G_ER4: + return snprintf(result, lmax, TRANSVR_IF_SP_40G); + /* 40G Copper */ + case TRANSVR_CLASS_COPPER_L4_40G: + return snprintf(result, lmax, TRANSVR_IF_SP_40G); + /* 10G Optical */ + case TRANSVR_CLASS_OPTICAL_10G: + case TRANSVR_CLASS_OPTICAL_10G_Q_AOC: + case TRANSVR_CLASS_OPTICAL_10G_Q_SR: /* Need Check: SR4 or SR */ + case TRANSVR_CLASS_OPTICAL_10G_Q_LR: /* Need Check: SR4 or SR */ + case TRANSVR_CLASS_OPTICAL_10G_Q_ER: + return snprintf(result, lmax, TRANSVR_IF_SP_10G); + /* 10G Copper */ + case TRANSVR_CLASS_COPPER_L4_10G: + return snprintf(result, lmax, TRANSVR_IF_SP_10G); + /* Optical */ + case TRANSVR_CLASS_OPTICAL: + break; + /* Copper */ + case TRANSVR_CLASS_COPPER: + break; + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined class case:%d", + detect_val); + goto err_qsfp_detect_if_speed_1; + } + /* Check br and extbr */ + detect_val = _qsfp_detect_if_sp_by_br(self); + switch(detect_val) { + case TRANSVR_CLASS_UNSPECIFIED: + break; + case TRANSVR_CLASS_10G: + return snprintf(result, lmax, TRANSVR_IF_SP_10G); + case TRANSVR_CLASS_40G: + return snprintf(result, lmax, TRANSVR_IF_SP_40G); + case TRANSVR_CLASS_100G: + return snprintf(result, lmax, TRANSVR_IF_SP_100G); + default: + snprintf(err_msg, sizeof(err_msg), + "Detect undefined BR case:%d", + detect_val); + goto err_qsfp_detect_if_speed_1; + } + /* Exception case: Can't verify */ + snprintf(err_msg, sizeof(err_msg), "Can not identify!"); + goto err_qsfp_detect_if_speed_1; + +err_qsfp_detect_if_speed_1: + snprintf(result, lmax, TRANSVR_UEVENT_UNKNOW); + SWPS_INFO("%s: %s :%s\n", __func__, err_msg, self->swp_name); + return ERR_TRANSVR_ABNORMAL; +} + + +int +qsfp_get_if_speed(struct transvr_obj_s *self, + char *buf_p){ + + int lmax = 16; + char tmp_result[16] = DEBUG_TRANSVR_STR_VAL; + + if (self->state != STATE_TRANSVR_CONNECTED) { + return snprintf(buf_p, lmax, "%d\n", self->state); + } + if (_qsfp_detect_if_speed(self, tmp_result) < 0) { + return snprintf(buf_p, lmax, "%d\n", ERR_TRANSVR_ABNORMAL); + } + return snprintf(buf_p, lmax, "%s\n", tmp_result); +} + + +int +_common_set_lane_map_str(struct transvr_obj_s* self, + char *result) { + int i = 0; + int tmp_val = 0; + char tmp_str[LEN_TRANSVR_L_STR] = DEBUG_TRANSVR_STR_VAL; + char err_msg[LEN_TRANSVR_L_STR] = DEBUG_TRANSVR_STR_VAL; + + memset(result, 0, LEN_TRANSVR_L_STR); + snprintf(result, LEN_TRANSVR_L_STR, "%s=", TRANSVR_UEVENT_KEY_LANE); + + for (i=0; ilane_id); i++) { + tmp_val = self->lane_id[i]; + if (tmp_val < 1) { + break; + } + if (tmp_val > 256) { + snprintf(err_msg, sizeof(err_msg), + "detect abnormal value:%d", tmp_val); + goto err_common_set_lane_map_str_1; + } + memset(tmp_str, 0, sizeof(tmp_str)); + if (i == 0) { + snprintf(tmp_str, LEN_TRANSVR_L_STR, "%d", tmp_val); + } else { + snprintf(tmp_str, LEN_TRANSVR_L_STR, ",%d", tmp_val); + } + strncat(result, tmp_str, LEN_TRANSVR_L_STR); + } + if (i == 0) { + goto err_common_set_lane_map_str_2; + } + return 0; + +err_common_set_lane_map_str_1: + SWPS_INFO("%s: %s", __func__, err_msg); +err_common_set_lane_map_str_2: + snprintf(result, LEN_TRANSVR_L_STR, "%s=%s", TRANSVR_UEVENT_KEY_LANE, TRANSVR_UEVENT_UNKNOW); + return EVENT_TRANSVR_TASK_FAIL; +} + + +int +_common_send_uevent(struct transvr_obj_s* self, + enum kobject_action u_action, + int (*detect_if_type)(struct transvr_obj_s *self, char *result), + int (*detect_if_speed)(struct transvr_obj_s *self, char *result), + int send_anyway) { + + char *uevent_envp[4]; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + char tmp_str[32] = DEBUG_TRANSVR_STR_VAL; + char tmp_str_1[32] = DEBUG_TRANSVR_STR_VAL; + char tmp_str_2[32] = DEBUG_TRANSVR_STR_VAL; + char tmp_str_3[64] = DEBUG_TRANSVR_STR_VAL; + + if (TRANSVR_UEVENT_ENABLE != 1) { + return ERR_TRANSVR_NOTSUPPORT; + } + if (_common_get_if_lane(self, tmp_str) < 0) { + snprintf(tmp_str_3, sizeof(tmp_str_3), + "%s=%s", TRANSVR_UEVENT_KEY_LANE, TRANSVR_UEVENT_UNKNOW); + } else { + snprintf(tmp_str_3, sizeof(tmp_str_3), + "%s=%s", TRANSVR_UEVENT_KEY_LANE, tmp_str); + } + switch (u_action) { + case KOBJ_ADD: + /* Detect type */ + if (detect_if_type(self, tmp_str) < 0) { + snprintf(err_msg, sizeof(err_msg), "%s", "Detect interface type fail!"); + snprintf(tmp_str_1, sizeof(tmp_str_1), "%s=%s", TRANSVR_UEVENT_KEY_IF, TRANSVR_UEVENT_UNKNOW); + snprintf(tmp_str_2, sizeof(tmp_str_2), "%s=%s", TRANSVR_UEVENT_KEY_SP, TRANSVR_UEVENT_UNKNOW); + uevent_envp[0] = tmp_str_1; + uevent_envp[1] = tmp_str_2; + uevent_envp[2] = tmp_str_3; + uevent_envp[3] = NULL; + goto private_common_send_uevent_4_fail; + } + snprintf(tmp_str_1, sizeof(tmp_str_1), "%s=%s", TRANSVR_UEVENT_KEY_IF, tmp_str); + uevent_envp[0] = tmp_str_1; + /* Detect speed */ + if (detect_if_speed(self, tmp_str) < 0) { + snprintf(err_msg, sizeof(err_msg), "%s", "Detect interface speed fail!"); + snprintf(tmp_str_2, sizeof(tmp_str_2), "%s=%s", TRANSVR_UEVENT_KEY_SP, TRANSVR_UEVENT_UNKNOW); + uevent_envp[1] = tmp_str_2; + uevent_envp[2] = tmp_str_3; + uevent_envp[3] = NULL; + goto private_common_send_uevent_4_fail; + } + snprintf(tmp_str_2, sizeof(tmp_str_2), "%s=%s", TRANSVR_UEVENT_KEY_SP, tmp_str); + uevent_envp[1] = tmp_str_2; + uevent_envp[2] = tmp_str_3; + uevent_envp[3] = NULL; + goto private_common_send_uevent_4_send; + + case KOBJ_REMOVE: + snprintf(tmp_str_1, sizeof(tmp_str_1), "%s=%s", TRANSVR_UEVENT_KEY_IF, TRANSVR_UEVENT_UNKNOW); + snprintf(tmp_str_2, sizeof(tmp_str_2), "%s=%s", TRANSVR_UEVENT_KEY_SP, TRANSVR_UEVENT_UNKNOW); + uevent_envp[0] = tmp_str_1; + uevent_envp[1] = tmp_str_2; + uevent_envp[2] = tmp_str_3; + uevent_envp[3] = NULL; + goto private_common_send_uevent_4_send; + + default: + snprintf(err_msg, sizeof(err_msg), "kobject_action:%d not support", u_action); + goto private_common_send_uevent_4_fail; + } + snprintf(err_msg, sizeof(err_msg), "%s", "Exception case"); + goto private_common_send_uevent_4_fail; + +private_common_send_uevent_4_fail: + SWPS_INFO("%s: %s :%s\n", __func__, err_msg, self->swp_name); + if (send_anyway) { + goto private_common_send_uevent_4_send; + } + return ERR_TRANSVR_UEVENT_FAIL; + +private_common_send_uevent_4_send: + return kobject_uevent_env(&(self->transvr_dev_p->kobj), + u_action, + uevent_envp); +} + +int +sfp_send_uevent(struct transvr_obj_s* self, + enum kobject_action u_action) { + int send_anyway = 1; + return _common_send_uevent(self, + u_action, + &_sfp_detect_if_type, + &_sfp_detect_if_speed, + send_anyway); +} + + +int +qsfp_send_uevent(struct transvr_obj_s* self, + enum kobject_action u_action) { + int send_anyway = 1; + return _common_send_uevent(self, + u_action, + &_qsfp_detect_if_type, + &_qsfp_detect_if_speed, + send_anyway); +} + + +int +fake_send_uevent(struct transvr_obj_s* self, + enum kobject_action u_action) { + return EVENT_TRANSVR_TASK_DONE; +} + + +int +common_fsm_4_direct_mode(struct transvr_obj_s* self, + char *caller_name){ + + int err; + int detect_result[2]; + int current_state = STATE_TRANSVR_UNEXCEPTED; + int current_type = TRANSVR_TYPE_ERROR; + + if (self->state == STATE_TRANSVR_NEW) { + if (_transvr_init_handler(self) < 0){ + return ERR_TRANSVR_INIT_FAIL; + } + } + err = detect_transvr_state(self, detect_result); + if (err < 0) { + return err; + } + /* In Direct mode, driver only detect transceiver when user call driver interface + * which on sysfs. So it only need consider the state of Transceiver. + */ + current_state = detect_result[0]; + current_type = detect_result[1]; + + switch (current_state){ + + case STATE_TRANSVR_DISCONNECTED: /* Transceiver is not plugged */ + self->state = current_state; + self->type = current_type; + return ERR_TRANSVR_UNPLUGGED; + + case STATE_TRANSVR_INIT: /* Transceiver is plugged, system not ready */ + return ERR_TRANSVR_UNINIT; + + case STATE_TRANSVR_ISOLATED: /* Transceiver is plugged, but has some issues */ + return ERR_TRNASVR_BE_ISOLATED; + + case STATE_TRANSVR_CONNECTED: /* Transceiver is plugged, system is ready */ + self->state = current_state; + self->type = current_type; + return 0; + + case STATE_TRANSVR_SWAPPED: /* Transceiver is plugged, system detect user changed */ + self->type = current_type; + if (reload_transvr_obj(self, current_type) < 0){ + self->state = STATE_TRANSVR_UNEXCEPTED; + return ERR_TRANSVR_UNEXCPT; + } + self->state = current_state; + return 0; + + case STATE_TRANSVR_UNEXCEPTED: /* Transceiver type or state is unexpected case */ + self->state = STATE_TRANSVR_UNEXCEPTED; + self->type = TRANSVR_TYPE_ERROR; + return ERR_TRANSVR_UNEXCPT; + + default: + SWPS_INFO("%s: state:%d not in define.\n", __func__, current_state); + break; + } + return ERR_TRANSVR_UNEXCPT; +} + + +static int +_is_except_happened_4_pmode(struct transvr_obj_s* self, + int new_state) { + + int event_chk = 0; + + if (self->temp == 0){ + return 0; + } + switch (new_state) { + case STATE_TRANSVR_INIT: + event_chk = EVENT_TRANSVR_EXCEP_INIT; + goto check_event_happened_4_pmode; + + case STATE_TRANSVR_CONNECTED: + event_chk = EVENT_TRANSVR_EXCEP_UP; + goto check_event_happened_4_pmode; + + case STATE_TRANSVR_DISCONNECTED: + event_chk = EVENT_TRANSVR_EXCEP_DOWN; + goto check_event_happened_4_pmode; + + case STATE_TRANSVR_SWAPPED: + event_chk = EVENT_TRANSVR_EXCEP_SWAP; + goto check_event_happened_4_pmode; + + case STATE_TRANSVR_UNEXCEPTED: + event_chk = EVENT_TRANSVR_EXCEP_EXCEP; + goto check_event_happened_4_pmode; + + case STATE_TRANSVR_ISOLATED: + event_chk = EVENT_TRANSVR_EXCEP_ISOLATED; + goto check_event_happened_4_pmode; + + default: + SWPS_INFO("%s: unexcepted case:%d\n", __func__, new_state); + break; + } + return 0; + +check_event_happened_4_pmode: + if (self->temp == event_chk){ + return 1; + } + return 0; +} + + +int +common_fsm_4_polling_mode(struct transvr_obj_s* self, + char *caller_name){ + /* [Return Value]: + * ERR_TRANSVR_UNINIT : (1) Initial not ready + * ERR_TRANSVR_UNPLUGGED : (1) Any -> Down + * ERR_TRANSVR_TASK_BUSY : (1) Wait Initial task + * ERR_TRANSVR_UNEXCPT : (1) Initial fail + * (2) Task fail + * (3) Reload fail + * ERR_TRNASVR_BE_ISOLATED : (1) Already be isolated + * OK Case (return 0) : (1) action_4_connected + * (2) action_4_nothing (initial retry) + */ + int curr_state[2]; + int old_state = self->state; + int old_type = self->type; + int new_state = STATE_TRANSVR_UNEXCEPTED; + int new_type = TRANSVR_TYPE_ERROR; + int return_val = ERR_TRANSVR_UNEXCPT; + + /* Never initial */ + if (self->state == STATE_TRANSVR_NEW) { + goto comfsm_action_4_reinit_obj; + } + /* Detect current state */ + switch (detect_transvr_state(self, curr_state)) { + case 0: + new_state = curr_state[0]; + new_type = curr_state[1]; + break; + + case ERR_TRNASVR_BE_ISOLATED: + new_state = STATE_TRANSVR_ISOLATED; + new_type = old_type; + break; + + case ERR_TRANSVR_I2C_CRASH: + goto comfsm_action_4_report_i2c_crash; + + case ERR_TRANSVR_UNEXCPT: + default: + new_state = STATE_TRANSVR_UNEXCEPTED; + new_type = old_type; + } + /* State handling */ + switch (old_state) { + case STATE_TRANSVR_INIT: /* INIT -> */ + return_val = ERR_TRANSVR_UNINIT; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_CONNECTED: + switch (new_state) { + case STATE_TRANSVR_INIT: /* Case 1-1: UP -> INIT */ + SWPS_INFO("Detect %s is present. :1-1\n",self->swp_name); + return_val = ERR_TRANSVR_UNINIT; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_CONNECTED: /* Case 1-2: UP -> UP */ + return_val = 0; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_DISCONNECTED: /* Case 1-3: UP -> DOWN */ + SWPS_INFO("Detect %s is removed. :1-3\n",self->swp_name); + goto comfsm_action_4_disconnected; + + case STATE_TRANSVR_SWAPPED: /* Case 1-4: UP -> SWAP */ + SWPS_INFO("Detect %s is swapped. :1-4\n",self->swp_name); + goto comfsm_action_4_reload_obj; + + case STATE_TRANSVR_UNEXCEPTED: /* Case 1-5: UP -> UNEXPET */ + SWPS_INFO("Detect %s has error. :1-5\n",self->swp_name); + goto comfsm_action_4_unexpected; + + case STATE_TRANSVR_ISOLATED: /* Case 1-6: UP -> ISOLATE */ + SWPS_INFO("Detect %s be isolated. :1-6\n",self->swp_name); + goto comfsm_action_4_isolate_obj; + + default: + break; + } + goto comfsm_action_4_unexpected; + + case STATE_TRANSVR_DISCONNECTED: + switch (new_state) { + case STATE_TRANSVR_INIT: /* Case 2-1: DOWN -> INIT */ + SWPS_INFO("Detect %s is present. :2-1\n",self->swp_name); + return_val = ERR_TRANSVR_UNINIT; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_CONNECTED: /* Case 2-2: DOWN -> UP */ + SWPS_INFO("Detect %s is present. :2-2\n",self->swp_name); + goto comfsm_action_4_reinit_obj; + + case STATE_TRANSVR_DISCONNECTED: /* Case 2-3: DOWN -> DOWN */ + return_val = ERR_TRANSVR_UNPLUGGED; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_SWAPPED: /* Case 2-4: DOWN -> SWAP */ + SWPS_INFO("Detect %s is swapped. :2-4\n",self->swp_name); + goto comfsm_action_4_reload_obj; + + case STATE_TRANSVR_UNEXCEPTED: /* Case 2-5: DOWN -> UNEXPET */ + SWPS_INFO("Detect %s has error. :2-5\n",self->swp_name); + goto comfsm_action_4_unexpected; + + case STATE_TRANSVR_ISOLATED: /* Case 2-6: DOWN -> ISOLATE */ + SWPS_INFO("Detect %s be isolated. :2-6\n",self->swp_name); + goto comfsm_action_4_isolate_obj; + + default: + break; + } + goto comfsm_action_4_unexpected; + + case STATE_TRANSVR_UNEXCEPTED: + /* Filter out re-action */ + if (_is_except_happened_4_pmode(self, new_state)) { + goto comfsm_action_4_keep_state; + } + /* First action */ + switch (new_state) { + case STATE_TRANSVR_INIT: /* Case 3-1: UNEXPET -> INIT */ + SWPS_INFO("Detect %s is present. :3-1\n",self->swp_name); + self->temp = EVENT_TRANSVR_EXCEP_INIT; + return_val = ERR_TRANSVR_UNINIT; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_CONNECTED: /* Case 3-2: UNEXPET -> UP */ + SWPS_INFO("Detect %s is present. :3-2\n",self->swp_name); + self->temp = EVENT_TRANSVR_EXCEP_UP; + goto comfsm_action_4_reload_obj; + + case STATE_TRANSVR_DISCONNECTED: /* Case 3-3: UNEXPET -> DOWN */ + SWPS_INFO("Detect %s is removed. :3-3\n",self->swp_name); + goto comfsm_action_4_disconnected; + + case STATE_TRANSVR_SWAPPED: /* Case 3-4: UNEXPET -> SWAP */ + SWPS_INFO("Detect %s is swapped. :3-4\n",self->swp_name); + self->temp = EVENT_TRANSVR_EXCEP_SWAP; + goto comfsm_action_4_reload_obj; + + case STATE_TRANSVR_UNEXCEPTED: /* Case 3-5: UNEXPET -> UNEXPET */ + self->temp = EVENT_TRANSVR_EXCEP_EXCEP; + return_val = ERR_TRANSVR_UNEXCPT; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_ISOLATED: /* Case 3-6: UNEXPET -> ISOLATE */ + SWPS_INFO("Detect %s be isolated. :3-6\n",self->swp_name); + goto comfsm_action_4_isolate_obj; + + default: + break; + } + goto comfsm_action_4_unexpected; + + case STATE_TRANSVR_ISOLATED: + /* Filter out re-action */ + if (_is_except_happened_4_pmode(self, new_state)) { + goto comfsm_action_4_keep_state; + } + /* First action */ + switch (new_state) { + case STATE_TRANSVR_INIT: /* Case 4-1: ISOLATE -> INIT */ + SWPS_INFO("Detect %s internal error. :4-1\n",self->swp_name); + self->temp = EVENT_TRANSVR_EXCEP_INIT; + return_val = ERR_TRNASVR_BE_ISOLATED; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_CONNECTED: /* Case 4-2: ISOLATE -> UP */ + SWPS_INFO("Detect %s internal error. :4-2\n",self->swp_name); + self->temp = EVENT_TRANSVR_EXCEP_UP; + return_val = ERR_TRNASVR_BE_ISOLATED; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_DISCONNECTED: /* Case 4-3: ISOLATE -> DOWN */ + SWPS_INFO("Detect %s is removed. :4-3\n",self->swp_name); + goto comfsm_action_4_disconnected; + + case STATE_TRANSVR_SWAPPED: /* Case 4-4: ISOLATE -> SWAP */ + SWPS_INFO("Detect %s internal error. :4-4\n",self->swp_name); + self->temp = EVENT_TRANSVR_EXCEP_SWAP; + return_val = ERR_TRNASVR_BE_ISOLATED; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_UNEXCEPTED: /* Case 4-5: ISOLATE -> UNEXPET */ + SWPS_INFO("Detect %s internal error. :4-5\n",self->swp_name); + self->temp = EVENT_TRANSVR_EXCEP_EXCEP; + return_val = ERR_TRNASVR_BE_ISOLATED; + goto comfsm_action_4_keep_state; + + case STATE_TRANSVR_ISOLATED: /* Case 4-6: ISOLATE -> ISOLATE */ + return_val = ERR_TRNASVR_BE_ISOLATED; + goto comfsm_action_4_keep_state; + + default: + break; + } + goto comfsm_action_4_unexpected; + + default: + break; + } + goto comfsm_action_4_unexpected; + + +comfsm_action_4_keep_state: + return return_val; + +comfsm_action_4_reinit_obj: + SWPS_DEBUG("FSM action: %s re-initial.\n", self->swp_name); + return_val = _transvr_init_handler(self); + goto comfsm_action_4_identify_event; + +comfsm_action_4_reload_obj: + SWPS_DEBUG("FSM action: %s reload.\n", self->swp_name); + self->type = new_type; + return_val = reload_transvr_obj(self, new_type); + goto comfsm_action_4_identify_event; + +comfsm_action_4_identify_event: + switch (return_val) { + case EVENT_TRANSVR_INIT_UP: + case EVENT_TRANSVR_TASK_DONE: + goto comfsm_action_4_connected; + + case EVENT_TRANSVR_INIT_DOWN: + goto comfsm_action_4_disconnected; + + case EVENT_TRANSVR_INIT_REINIT: + goto comfsm_action_4_nothing; + + case EVENT_TRANSVR_TASK_WAIT: + self->state = STATE_TRANSVR_INIT; + return ERR_TRANSVR_TASK_BUSY; + + case EVENT_TRANSVR_TASK_FAIL: + SWPS_INFO("%s detect EVENT_TRANSVR_TASK_FAIL.\n", self->swp_name); + goto comfsm_action_4_unexpected; + + case EVENT_TRANSVR_INIT_FAIL: + SWPS_INFO("%s detect EVENT_TRANSVR_INIT_FAIL.\n", self->swp_name); + goto comfsm_action_4_unexpected; + + case EVENT_TRANSVR_RELOAD_FAIL: + SWPS_INFO("%s detect EVENT_TRANSVR_RELOAD_FAIL.\n", self->swp_name); + goto comfsm_action_4_unexpected; + + case EVENT_TRANSVR_I2C_CRASH: + goto comfsm_action_4_report_i2c_crash; + + case EVENT_TRANSVR_EXCEP_ISOLATED: + goto comfsm_action_4_isolate_obj; + + default: + SWPS_INFO("%s detect undefined event:%d.\n", self->swp_name, return_val); + goto comfsm_action_4_unexpected; + } + +comfsm_action_4_nothing: + SWPS_DEBUG("FSM action: %s do nothing.\n", self->swp_name); + return 0; + +comfsm_action_4_connected: + SWPS_DEBUG("FSM action: %s Connected.\n", self->swp_name); + self->state = STATE_TRANSVR_CONNECTED; + self->type = new_type; + self->send_uevent(self, KOBJ_ADD); + _transvr_clean_retry(self); + return 0; + +comfsm_action_4_disconnected: + SWPS_DEBUG("FSM action: %s Disconnected. \n", self->swp_name); + self->state = STATE_TRANSVR_DISCONNECTED; + self->temp = EVENT_TRANSVR_TASK_DONE; + self->send_uevent(self, KOBJ_REMOVE); + _transvr_clean_retry(self); + _transvr_clean_handler(self); + return ERR_TRANSVR_UNPLUGGED; + +comfsm_action_4_report_i2c_crash: + SWPS_DEBUG("FSM action: %s report I2C crash.\n", self->swp_name); + self->state = STATE_TRANSVR_UNEXCEPTED; + return ERR_TRANSVR_I2C_CRASH; + +comfsm_action_4_isolate_obj: + SWPS_DEBUG("FSM action: %s isolate.\n", self->swp_name); + self->state = STATE_TRANSVR_ISOLATED; + return ERR_TRNASVR_BE_ISOLATED; + +comfsm_action_4_unexpected: + SWPS_INFO("FSM action: %s unexpected.\n", self->swp_name); + SWPS_INFO("Dump: :%d :0x%02x :%d :0x%02x\n", + old_state, old_type, new_state, new_type); + self->state = STATE_TRANSVR_UNEXCEPTED; + self->send_uevent(self, KOBJ_REMOVE); + _transvr_clean_handler(self); + return ERR_TRANSVR_UNEXCPT; +} + + +int +fake_fsm_4_direct_mode(struct transvr_obj_s* self, + char *caller_name){ + self->state = STATE_TRANSVR_CONNECTED; + self->type = TRANSVR_TYPE_FAKE; + return 0; +} + + +int +fake_fsm_4_polling_mode(struct transvr_obj_s* self, + char *caller_name){ + self->state = STATE_TRANSVR_CONNECTED; + self->type = TRANSVR_TYPE_FAKE; + return 0; +} + + +/* ========== Object functions for Initial procedure ========== + */ +int +transvr_init_common(struct transvr_obj_s *self){ + /* Nothing to update */ + return EVENT_TRANSVR_TASK_DONE; +} + + +int +transvr_init_fake(struct transvr_obj_s *self){ + return EVENT_TRANSVR_TASK_DONE; +} + + +int +transvr_init_sfp(struct transvr_obj_s *self){ + + int tmp_val = DEBUG_TRANSVR_INT_VAL; + int err_code = DEBUG_TRANSVR_INT_VAL; + char *err_msg = "ERR"; + + self->info = sft_detect_transvr_class(self); + /* Disable auto_config */ + if (!self->auto_config) { + return EVENT_TRANSVR_TASK_DONE; + } + /* Handle multi-rate */ + err_code = initfunc_sfp_handle_multi_rate_mode(self); + if (err_code < 0) { + err_msg = "initfunc_sfp_handle_multi_rate_mode fail!"; + goto err_transvr_init_sfp_1; + } + /* Handle 1G- RJ45 */ + tmp_val = err_code; + err_code = initfunc_sfp_handle_1g_rj45(self); + if (err_code < 0) { + err_msg = "initfunc_sfp_handle_1g_rj45 fail!"; + goto err_transvr_init_sfp_1; + } + tmp_val = (tmp_val > err_code ? tmp_val : err_code); + if (tmp_val > EVENT_TRANSVR_TASK_DONE) { + return tmp_val; + } + return EVENT_TRANSVR_TASK_DONE; + +err_transvr_init_sfp_1: + SWPS_INFO("%s: %s :%d :%s\n", + __func__, err_msg, err_code, self->swp_name); + return EVENT_TRANSVR_INIT_FAIL; +} + + +int +transvr_init_qsfp(struct transvr_obj_s *self){ + + int err = EVENT_TRANSVR_EXCEP_EXCEP; + char *emsg = "ERR"; + + self->info = qsft_detect_transvr_class(self); + if (!self->auto_config) { + return EVENT_TRANSVR_TASK_DONE; + } + err = initfunc_qsfp_handle_power_mode(self); + if (err < 0){ + emsg = "initfunc_qsfp_handle_tx_disable fail!"; + goto err_transvr_init_qsfp; + } + return EVENT_TRANSVR_TASK_DONE; + +err_transvr_init_qsfp: + SWPS_INFO("%s: %s :%d :%s\n", + __func__, emsg, err, self->swp_name); + return EVENT_TRANSVR_INIT_FAIL; +} + + +int +transvr_init_qsfp28(struct transvr_obj_s *self){ + + int tmp_val = EVENT_TRANSVR_EXCEP_EXCEP; + int err_val = EVENT_TRANSVR_EXCEP_EXCEP; + char *err_msg = "ERR"; + + /* Handle QSFP common */ + err_val = transvr_init_qsfp(self); + if (err_val < 0){ + err_msg = "transvr_init_qsfp fail!"; + goto err_transvr_init_qsfp28_1; + } + /* Disable auto_config */ + if (!self->auto_config) { + return err_val; + } + /* Handle CDR */ + tmp_val = err_val; + err_val = initfunc_qsfp28_handle_cdr(self); + if (err_val < 0){ + err_msg = "Handle CDR fail!"; + goto err_transvr_init_qsfp28_1; + } + tmp_val = (tmp_val > err_val ? tmp_val : err_val); + if (tmp_val > EVENT_TRANSVR_TASK_DONE) { + return tmp_val; + } + return EVENT_TRANSVR_TASK_DONE; + +err_transvr_init_qsfp28_1: + SWPS_INFO("%s: %s :%d :%s\n", + __func__, err_msg, err_val, self->swp_name); + return EVENT_TRANSVR_INIT_FAIL; +} + + +/* ========== Object Initial handler ========== + */ +static int +_is_transvr_valid(struct transvr_obj_s *self, + int type, + int state) { + /* [Return] + * 0 : OK, inserted + * EVENT_TRANSVR_INIT_DOWN : OK, removed + * EVENT_TRANSVR_INIT_FAIL : Outside error, type doesn't supported + * EVENT_TRANSVR_EXCEP_INIT : Internal error, state undefined + */ + switch (type) { + case TRANSVR_TYPE_SFP: + case TRANSVR_TYPE_QSFP: + case TRANSVR_TYPE_QSFP_PLUS: + case TRANSVR_TYPE_QSFP_28: + case TRANSVR_TYPE_UNPLUGGED: + case TRANSVR_TYPE_FAKE: + break; + default: + SWPS_INFO("detect undefined type:0x%02x on %s\n", + type, self->swp_name); + return EVENT_TRANSVR_INIT_FAIL; + } + switch (state) { + case STATE_TRANSVR_DISCONNECTED: + return EVENT_TRANSVR_INIT_DOWN; + case STATE_TRANSVR_INIT: + case STATE_TRANSVR_CONNECTED: + case STATE_TRANSVR_SWAPPED: + break; + default: + SWPS_INFO("detect undefined state:%d on %s\n", + state, self->swp_name); + return EVENT_TRANSVR_EXCEP_INIT; + } + return 0; +} + + +static int +_is_transvr_hw_ready(struct transvr_obj_s *self, + int type){ + /* [Return] + * EVENT_TRANSVR_TASK_DONE : Ready + * EVENT_TRANSVR_TASK_WAIT : Not ready + * EVENT_TRANSVR_INIT_FAIL : Error + */ + int addr = DEBUG_TRANSVR_INT_VAL; + int page = DEBUG_TRANSVR_INT_VAL; + int offs = DEBUG_TRANSVR_INT_VAL; + int bit = DEBUG_TRANSVR_INT_VAL; + int ready = DEBUG_TRANSVR_INT_VAL; + int err = DEBUG_TRANSVR_INT_VAL; + char *emsg = DEBUG_TRANSVR_STR_VAL; + uint8_t ab_val = DEBUG_TRANSVR_HEX_VAL; + + switch (type) { + case TRANSVR_TYPE_SFP: + addr = VAL_TRANSVR_8472_READY_ADDR; + page = VAL_TRANSVR_8472_READY_PAGE; + offs = VAL_TRANSVR_8472_READY_OFFSET; + bit = VAL_TRANSVR_8472_READY_BIT; + ready = VAL_TRANSVR_8472_READY_VALUE; + ab_val = VAL_TRANSVR_8472_READY_ABNORMAL; + break; + + case TRANSVR_TYPE_QSFP: + case TRANSVR_TYPE_QSFP_PLUS: + case TRANSVR_TYPE_QSFP_28: + addr = VAL_TRANSVR_8436_READY_ADDR; + page = VAL_TRANSVR_8436_READY_PAGE; + offs = VAL_TRANSVR_8436_READY_OFFSET; + bit = VAL_TRANSVR_8436_READY_BIT; + ready = VAL_TRANSVR_8436_READY_VALUE; + ab_val = VAL_TRANSVR_8436_READY_ABNORMAL; + break; + + case TRANSVR_TYPE_UNPLUGGED: + case TRANSVR_TYPE_FAKE: + return EVENT_TRANSVR_TASK_DONE; + + default: + emsg = "unexpected case"; + goto err_is_transvr_hw_ready; + } + /* Select target page */ + err = _common_setup_page(self, addr, page, offs, 1, 0); + if (err < 0) { + emsg = "setup page fail"; + goto err_is_transvr_hw_ready; + } + /* Check feature supported + * [Note] + * Some of transceiver/cables doesn't support "Status Indicators" + * (ex:DAC, RJ45 copper SFP ...etc). In these case, we bypass the + * step of checking Status Indicators, then state machine will take + * the following handle procedure. + */ + err = i2c_smbus_read_byte_data(self->i2c_client_p, + VAL_TRANSVR_COMID_OFFSET); + if (err < 0) { + emsg = "doesn't support Status Indicators"; + goto bypass_is_transvr_hw_ready; + } + /* Filter abnormal case */ + if (err == ab_val) { + emsg = "detect using unusual definition."; + goto bypass_is_transvr_hw_ready; + } + /* Get Status Indicators */ + err = i2c_smbus_read_byte_data(self->i2c_client_p, offs); + if (err < 0) { + emsg = "detect current value fail"; + goto err_is_transvr_hw_ready; + } + if ((err & (1<:%d\n", __func__, emsg, type); + return EVENT_TRANSVR_TASK_DONE; + +err_is_transvr_hw_ready: + SWPS_DEBUG("%s: %s :%d\n", __func__, emsg, type); + return EVENT_TRANSVR_INIT_FAIL; +} + + +static int +_is_transvr_support_ctle(struct transvr_obj_s *self) { + + switch (self->info) { + case TRANSVR_CLASS_OPTICAL_25G: + case TRANSVR_CLASS_OPTICAL_25G_AOC: + case TRANSVR_CLASS_OPTICAL_25G_SR: + case TRANSVR_CLASS_OPTICAL_25G_LR: + case TRANSVR_CLASS_OPTICAL_25G_ER: + case TRANSVR_CLASS_OPTICAL_100G: + case TRANSVR_CLASS_OPTICAL_100G_AOC: + case TRANSVR_CLASS_OPTICAL_100G_SR4: + case TRANSVR_CLASS_OPTICAL_100G_LR4: + case TRANSVR_CLASS_OPTICAL_100G_ER4: + case TRANSVR_CLASS_OPTICAL_100G_PSM4: + return 1; + default: + break; + } + return 0; +} + + +static int +_transvr_init_handler(struct transvr_obj_s *self){ + + int detect[2]; + int d_state = STATE_TRANSVR_UNEXCEPTED; + int d_type = TRANSVR_TYPE_ERROR; + int result = ERR_TRANSVR_UNINIT; + int retry = 6; /* (6+1) x 0.3 = 2.1s > spec:2.0s */ + int elimit = 63; + char emsg[64] = DEBUG_TRANSVR_STR_VAL; + + /* Clean and check callback */ + self->state = STATE_TRANSVR_INIT; + if (self->init == NULL) { + snprintf(emsg, elimit, "init() is null"); + goto initer_err_case_unexcept_0; + } + if (self->clean == NULL) { + snprintf(emsg, elimit, "clean() is null"); + goto initer_err_case_unexcept_0; + } + self->clean(self); + + /* Detect transceiver information */ + result = detect_transvr_state(self, detect); + if (result < 0) { + snprintf(emsg, elimit, "detect_transvr_state() fail"); + switch (result) { + case ERR_TRANSVR_I2C_CRASH: + goto initer_err_case_i2c_ceash; + case ERR_TRNASVR_BE_ISOLATED: + goto initer_err_case_be_isolated; + + case ERR_TRANSVR_UNEXCPT: + default: + break; + } + goto initer_err_case_retry_1; + } + d_state = detect[0]; + d_type = detect[1]; + + /* Verify transceiver type and state */ + switch (_is_transvr_valid(self, d_type, d_state)) { + case 0: + break; + case EVENT_TRANSVR_INIT_DOWN: + goto initer_ok_case_down;; + case EVENT_TRANSVR_INIT_FAIL: + snprintf(emsg, elimit, "transceiver type doesn't support"); + goto initer_err_case_alarm_to_user; + case EVENT_TRANSVR_EXCEP_INIT: + default: + goto initer_err_case_unexcept_1; + } + + /* Handle reload case */ + if (self->type != d_type){ + /* This is the protect mechanism. Normally, This case will not happen. + * When State machine detect swap event during initial, It will trigger + * reload function to ensure type correct. */ + if (_reload_transvr_obj(self, d_type) < 0){ + snprintf(emsg, elimit, "reload object fail"); + goto initer_err_case_unexcept_1; + } + } + + /* Check transceiver HW initial ready */ + switch (_is_transvr_hw_ready(self, d_type)) { + case EVENT_TRANSVR_TASK_DONE: + break; + case EVENT_TRANSVR_TASK_WAIT: + goto initer_err_case_retry_1; + case EVENT_TRANSVR_INIT_FAIL: + default: + goto initer_err_case_unexcept_1; + } + + /* Try to update all and check */ + if (self->update_all(self, 1) < 0){ + /* For some transceiver, EEPROME has lag issues during initial stage. + * In this case, we set status back to STATE_TRANSVR_NEW, than it will + * be checked in next polling cycle. */ + goto initer_err_case_retry_1; + } + + /* Execute init() call back */ + result = self->init(self); + switch (result) { + case EVENT_TRANSVR_TASK_DONE: + break; + case EVENT_TRANSVR_TASK_WAIT: + goto initer_ok_case_wait; + + default: + snprintf(emsg, elimit, "undefined init() return:%d\n", result); + goto initer_err_case_unexcept_1; + } + goto initer_ok_case_up; + + +initer_ok_case_wait: + self->dump_all(self); + return EVENT_TRANSVR_TASK_WAIT; + +initer_ok_case_up: + self->state = STATE_TRANSVR_CONNECTED; + self->temp = 0; + self->dump_all(self); + return EVENT_TRANSVR_INIT_UP; + +initer_ok_case_down: + self->temp = 0; + self->state = STATE_TRANSVR_DISCONNECTED; + return EVENT_TRANSVR_INIT_DOWN; + +initer_err_case_i2c_ceash: + SWPS_DEBUG("%s: %s :%s :I2C crash\n", + __func__, emsg, self->swp_name); + self->state = STATE_TRANSVR_UNEXCEPTED; + return EVENT_TRANSVR_I2C_CRASH; + +initer_err_case_be_isolated: + SWPS_DEBUG("%s: %s :%s :isolated\n", + __func__, emsg, self->swp_name); + self->state = STATE_TRANSVR_ISOLATED; + return EVENT_TRANSVR_EXCEP_ISOLATED; + +initer_err_case_retry_1: + SWPS_DEBUG("%s: %s :%s :retry\n", + __func__, emsg, self->swp_name); + if (_transvr_handle_retry(self, retry) == 0) { + self->state = STATE_TRANSVR_NEW; + return EVENT_TRANSVR_INIT_REINIT; + } + goto initer_err_case_alarm_to_user; + +initer_err_case_unexcept_1: + self->clean(self); +initer_err_case_unexcept_0: + self->state = STATE_TRANSVR_UNEXCEPTED; + if (_is_except_happened_4_pmode(self, d_state) && + (self->mode == TRANSVR_MODE_POLLING) ){ + SWPS_INFO("%s: %s :%s\n", __func__, emsg, self->swp_name); + SWPS_INFO("Dump: :%d :%d :%d :%d\n", + self->state, self->type, d_state, d_type); + } + return EVENT_TRANSVR_INIT_FAIL; + +initer_err_case_alarm_to_user: + SWPS_DEBUG("%s: %s :%s :alarm_to_user\n", + __func__, emsg, self->swp_name); + self->state = STATE_TRANSVR_UNEXCEPTED; + alarm_msg_2_user(self, "detected transceiver/cables not meet SFF standard"); + return EVENT_TRANSVR_INIT_FAIL; +} + + +/* ========== Object functions for Clean procedure ========== + */ +int +_transvr_clean_handler(struct transvr_obj_s *self){ + + int retval = DEBUG_TRANSVR_INT_VAL; + + if (!self->clean) { + SWPS_ERR("%s: %s clean() is NULL.\n", + __func__, self->swp_name); + return EVENT_TRANSVR_TASK_FAIL; + } + retval = self->clean(self); + if (retval != EVENT_TRANSVR_TASK_DONE){ + SWPS_ERR("%s: %s clean() fail. [ERR]:%d\n", + __func__, self->swp_name, retval); + return retval; + } + return EVENT_TRANSVR_TASK_DONE; +} + + +int +common_transvr_clean(struct transvr_obj_s *self){ + + transvr_task_free_all(self); + return EVENT_TRANSVR_TASK_DONE; +} + + +int +qsfp_transvr_clean(struct transvr_obj_s *self){ + + int retval; + int lpower_config = 1; + + retval = _taskfunc_qsfp_setup_power_mod(self, lpower_config); + if (retval < 0){ + SWPS_ERR("%s: Set lpmod fail! :%d\n", + __func__, retval); + return retval; + } + retval = common_transvr_clean(self); + if (retval < 0){ + SWPS_ERR("%s: common_transvr_clean fail! :%d\n", + __func__, retval); + return retval; + } + return EVENT_TRANSVR_TASK_DONE; +} + + +int +fake_transvr_clean(struct transvr_obj_s *self){ + + return EVENT_TRANSVR_TASK_DONE; +} + + +/* ========== Object functions for check and update ========== + */ +int +common_transvr_check(struct transvr_obj_s *self){ + + char fun_str[32] = "common_transvr_check"; + + if (self->mode != TRANSVR_MODE_POLLING) { + SWPS_ERR("%s: mode:%d is not TRANSVR_MODE_POLLING\n", + fun_str, self->mode); + return ERR_TRANSVR_UNEXCPT; + } + /* Trigger delay task */ + transvr_task_run_all(self); + /* Trigger state machine to check and update */ + return self->fsm_4_polling(self, fun_str); +} + + +int +fake_transvr_check(struct transvr_obj_s *self){ + return 0; +} + + +/* ========== Functions for Factory pattern ========== + */ +static int +setup_transvr_public_cb(struct transvr_obj_s *self, + int transvr_type){ + switch (transvr_type){ + case TRANSVR_TYPE_SFP: + self->get_id = common_get_id; + self->get_ext_id = common_get_ext_id; + self->get_connector = common_get_connector; + self->get_vendor_name = common_get_vendor_name; + self->get_vendor_pn = common_get_vendor_pn; + self->get_vendor_rev = common_get_vendor_rev; + self->get_vendor_sn = common_get_vendor_sn; + self->get_power_cls = unsupported_get_func; + self->get_br = common_get_br; + self->get_len_sm = sfp_get_len_sm; + self->get_len_smf = common_get_len_smf; + self->get_len_om1 = common_get_len_om1; + self->get_len_om2 = common_get_len_om2; + self->get_len_om3 = common_get_len_om3; + self->get_len_om4 = common_get_len_om4; + self->get_comp_rev = common_get_comp_rev; + self->get_comp_eth_1 = sfp_get_comp_eth_1; + self->get_comp_eth_10 = sfp_get_comp_eth_10; + self->get_comp_eth_10_40 = unsupported_get_func; + self->get_comp_extend = common_get_comp_extended; + self->get_cdr = unsupported_get_func; + self->get_rate_id = sfp_get_rate_id; + self->get_soft_rs0 = sfp_get_soft_rs0; + self->get_soft_rs1 = sfp_get_soft_rs1; + self->get_info = common_get_info; + self->get_if_type = sfp_get_if_type; + self->get_if_speed = sfp_get_if_speed; + self->get_if_lane = common_get_if_lane; + self->get_curr_temp = sfp_get_transvr_temp; + self->get_curr_vol = sfp_get_transvr_voltage; + self->get_soft_rx_los = unsupported_get_func2; + self->get_soft_tx_disable = unsupported_get_func2; + self->get_soft_tx_fault = unsupported_get_func2; + self->get_auto_tx_disable = unsupported_get_func2; + self->get_tx_bias = sfp_get_transvr_tx_bias; + self->get_tx_power = sfp_get_transvr_tx_power; + self->get_rx_power = sfp_get_transvr_rx_power; + self->get_tx_eq = sfp_get_transvr_tx_eq; + self->get_rx_am = unsupported_get_func2; + self->get_rx_em = sfp_get_transvr_rx_em; + self->get_wavelength = sfp_get_wavelength; + self->set_cdr = unsupported_set_func; + self->set_soft_rs0 = sfp_set_soft_rs0; + self->set_soft_rs1 = sfp_set_soft_rs1; + self->set_soft_tx_disable = unsupported_set_func; + self->set_auto_tx_disable = unsupported_set_func; + self->set_tx_eq = sfp_set_tx_eq; + self->set_rx_am = unsupported_set_func; + self->set_rx_em = sfp_set_rx_em; + return 0; + + case TRANSVR_TYPE_QSFP: + case TRANSVR_TYPE_QSFP_PLUS: + self->get_id = common_get_id; + self->get_ext_id = common_get_ext_id; + self->get_connector = common_get_connector; + self->get_vendor_name = common_get_vendor_name; + self->get_vendor_pn = common_get_vendor_pn; + self->get_vendor_rev = common_get_vendor_rev; + self->get_vendor_sn = common_get_vendor_sn; + self->get_power_cls = qsfp_get_power_cls; + self->get_br = common_get_br; + self->get_len_sm = unsupported_get_func; + self->get_len_smf = common_get_len_smf; + self->get_len_om1 = common_get_len_om1; + self->get_len_om2 = common_get_len_om2; + self->get_len_om3 = common_get_len_om3; + self->get_len_om4 = common_get_len_om4; + self->get_comp_rev = common_get_comp_rev; + self->get_comp_eth_1 = qsfp_get_comp_eth; + self->get_comp_eth_10 = unsupported_get_func; + self->get_comp_eth_10_40 = qsfp_get_comp_10_40; + self->get_comp_extend = common_get_comp_extended; + self->get_cdr = unsupported_get_func; + self->get_rate_id = unsupported_get_func; + self->get_soft_rs0 = unsupported_get_func; /* TBD */ + self->get_soft_rs1 = unsupported_get_func; /* TBD */ + self->get_info = common_get_info; + self->get_if_type = qsfp_get_if_type; + self->get_if_speed = qsfp_get_if_speed; + self->get_if_lane = common_get_if_lane; + self->get_curr_temp = qsfp_get_transvr_temp; + self->get_curr_vol = qsfp_get_transvr_voltage; + self->get_soft_rx_los = qsfp_get_soft_rx_los; + self->get_soft_tx_disable = qsfp_get_soft_tx_disable; + self->get_soft_tx_fault = qsfp_get_soft_tx_fault; + self->get_auto_tx_disable = qsfp_get_auto_tx_disable; + self->get_tx_bias = qsfp_get_transvr_tx_bias; + self->get_tx_power = qsfp_get_transvr_tx_power; + self->get_rx_power = qsfp_get_transvr_rx_power; + self->get_tx_eq = unsupported_get_func2; + self->get_rx_am = unsupported_get_func2; + self->get_rx_em = unsupported_get_func2; + self->get_wavelength = qsfp_get_wavelength; + self->set_cdr = unsupported_set_func; + self->set_soft_rs0 = unsupported_set_func; /* TBD */ + self->set_soft_rs1 = unsupported_set_func; /* TBD */ + self->set_soft_tx_disable = qsfp_set_soft_tx_disable; + self->set_auto_tx_disable = qsfp_set_auto_tx_disable; + self->set_tx_eq = unsupported_set_func; + self->set_rx_am = unsupported_set_func; + self->set_rx_em = unsupported_set_func; + return 0; + + case TRANSVR_TYPE_QSFP_28: + self->get_id = common_get_id; + self->get_ext_id = common_get_ext_id; + self->get_connector = common_get_connector; + self->get_vendor_name = common_get_vendor_name; + self->get_vendor_pn = common_get_vendor_pn; + self->get_vendor_rev = common_get_vendor_rev; + self->get_vendor_sn = common_get_vendor_sn; + self->get_power_cls = qsfp_get_power_cls; + self->get_br = common_get_br; + self->get_len_sm = unsupported_get_func; + self->get_len_smf = common_get_len_smf; + self->get_len_om1 = common_get_len_om1; + self->get_len_om2 = common_get_len_om2; + self->get_len_om3 = common_get_len_om3; + self->get_len_om4 = common_get_len_om4; + self->get_comp_rev = common_get_comp_rev; + self->get_comp_eth_1 = qsfp_get_comp_eth; + self->get_comp_eth_10 = unsupported_get_func; + self->get_comp_eth_10_40 = qsfp_get_comp_10_40; + self->get_comp_extend = common_get_comp_extended; + self->get_cdr = qsfp_get_cdr; + self->get_rate_id = unsupported_get_func; + self->get_soft_rs0 = unsupported_get_func; /* TBD */ + self->get_soft_rs1 = unsupported_get_func; /* TBD */ + self->get_info = common_get_info; + self->get_if_type = qsfp_get_if_type; + self->get_if_speed = qsfp_get_if_speed; + self->get_if_lane = common_get_if_lane; + self->get_curr_temp = qsfp_get_transvr_temp; + self->get_curr_vol = qsfp_get_transvr_voltage; + self->get_soft_rx_los = qsfp_get_soft_rx_los; + self->get_soft_tx_disable = qsfp_get_soft_tx_disable; + self->get_soft_tx_fault = qsfp_get_soft_tx_fault; + self->get_auto_tx_disable = qsfp_get_auto_tx_disable; + self->get_tx_bias = qsfp_get_transvr_tx_bias; + self->get_tx_power = qsfp_get_transvr_tx_power; + self->get_rx_power = qsfp_get_transvr_rx_power; + self->get_tx_eq = qsfp_get_transvr_tx_eq; + self->get_rx_am = qsfp_get_transvr_rx_am; + self->get_rx_em = qsfp_get_transvr_rx_em; + self->get_wavelength = qsfp_get_wavelength; + self->set_cdr = qsfp_set_cdr; + self->set_soft_rs0 = unsupported_set_func; /* TBD */ + self->set_soft_rs1 = unsupported_set_func; /* TBD */ + self->set_soft_tx_disable = qsfp_set_soft_tx_disable; + self->set_auto_tx_disable = qsfp_set_auto_tx_disable; + self->set_tx_eq = qsfp_set_tx_eq; + self->set_rx_am = qsfp_set_rx_am; + self->set_rx_em = qsfp_set_rx_em; + return 0; + + case TRANSVR_TYPE_FAKE: + self->get_id = fake_get_hex; + self->get_ext_id = fake_get_hex; + self->get_connector = fake_get_hex; + self->get_vendor_name = fake_get_str; + self->get_vendor_pn = fake_get_str; + self->get_vendor_rev = fake_get_str; + self->get_vendor_sn = fake_get_str; + self->get_power_cls = fake_get_int; + self->get_br = fake_get_hex; + self->get_len_sm = fake_get_int; + self->get_len_smf = fake_get_int; + self->get_len_om1 = fake_get_int; + self->get_len_om2 = fake_get_int; + self->get_len_om3 = fake_get_int; + self->get_len_om4 = fake_get_int; + self->get_comp_rev = fake_get_hex; + self->get_comp_eth_1 = fake_get_hex; + self->get_comp_eth_10 = fake_get_hex; + self->get_comp_eth_10_40 = fake_get_hex; + self->get_comp_extend = fake_get_hex; + self->get_cdr = fake_get_hex; + self->get_rate_id = fake_get_hex; + self->get_soft_rs0 = fake_get_binary; + self->get_soft_rs1 = fake_get_binary; + self->get_info = fake_get_int; + self->get_if_type = fake_get_str; + self->get_if_speed = fake_get_str; + self->get_if_lane = fake_get_str; + self->get_curr_temp = fake_get_str; + self->get_curr_vol = fake_get_str; + self->get_soft_rx_los = fake_get_str; + self->get_soft_tx_disable = fake_get_str; + self->get_soft_tx_fault = fake_get_str; + self->get_auto_tx_disable = fake_get_str; + self->get_tx_bias = fake_get_str; + self->get_tx_power = fake_get_str; + self->get_rx_power = fake_get_str; + self->get_tx_eq = fake_get_str; + self->get_rx_am = fake_get_str; + self->get_rx_em = fake_get_str; + self->get_wavelength = fake_get_str; + self->set_cdr = fake_set_hex; + self->set_soft_rs0 = fake_set_int; + self->set_soft_rs1 = fake_set_int; + self->set_soft_tx_disable = fake_set_int; + self->set_auto_tx_disable = fake_set_int; + self->set_tx_eq = fake_set_int; + self->set_rx_am = fake_set_int; + self->set_rx_em = fake_set_int; + return 0; + + default: + break; + } + SWPS_WARN("%s: Detect non-defined type:%d\n", __func__, transvr_type); + return ERR_TRANSVR_UNEXCPT; +} + + +static int +setup_transvr_private_cb(struct transvr_obj_s *self, + int transvr_type){ + switch (transvr_type){ + case TRANSVR_TYPE_SFP: + self->init = transvr_init_sfp; + self->clean = common_transvr_clean; + self->check = common_transvr_check; + self->update_all = _sfp_update_attr_all; + self->fsm_4_direct = common_fsm_4_direct_mode; + self->fsm_4_polling = common_fsm_4_polling_mode; + self->send_uevent = sfp_send_uevent; + self->dump_all = sfp_transvr_dump; + return 0; + + case TRANSVR_TYPE_QSFP: + case TRANSVR_TYPE_QSFP_PLUS: + self->init = transvr_init_qsfp; + self->clean = qsfp_transvr_clean; + self->check = common_transvr_check; + self->update_all = _qsfp_update_attr_all; + self->fsm_4_direct = common_fsm_4_direct_mode; + self->fsm_4_polling = common_fsm_4_polling_mode; + self->send_uevent = qsfp_send_uevent; + self->dump_all = qsfp_transvr_dump; + return 0; + + case TRANSVR_TYPE_QSFP_28: + self->init = transvr_init_qsfp28; + self->clean = qsfp_transvr_clean; + self->check = common_transvr_check; + self->update_all = _qsfp_update_attr_all; + self->fsm_4_direct = common_fsm_4_direct_mode; + self->fsm_4_polling = common_fsm_4_polling_mode; + self->send_uevent = qsfp_send_uevent; + self->dump_all = qsfp_transvr_dump; + return 0; + + case TRANSVR_TYPE_FAKE: + self->init = transvr_init_fake; + self->clean = fake_transvr_clean; + self->check = fake_transvr_check; + self->update_all = fake_transvr_update; + self->fsm_4_direct = fake_fsm_4_direct_mode; + self->fsm_4_polling = fake_fsm_4_polling_mode; + self->send_uevent = fake_send_uevent; + self->dump_all = fake_transvr_dump; + return 0; + + default: + break; + } + SWPS_WARN("%s: Detect non-defined type:%d\n", __func__, transvr_type); + return ERR_TRANSVR_UNEXCPT; +} + + +static struct eeprom_map_s * +get_eeprom_map(int transvr_type){ + + switch (transvr_type){ + case TRANSVR_TYPE_SFP: + return &eeprom_map_sfp; + case TRANSVR_TYPE_QSFP: + case TRANSVR_TYPE_QSFP_PLUS: + return &eeprom_map_qsfp; + case TRANSVR_TYPE_QSFP_28: + return &eeprom_map_qsfp28; + + default: + break; + } + SWPS_WARN("%s: Detect non-defined type:%d\n", __func__, transvr_type); + return NULL; +} + + +static int +setup_transvr_ssize_attr(char *swp_name, + struct transvr_obj_s *self, + struct eeprom_map_s *map_p, + struct ioexp_obj_s *ioexp_obj_p, + int ioexp_virt_offset, + int transvr_type, + int chipset_type, + int chan_id, + int run_mode){ + switch (run_mode){ + case TRANSVR_MODE_DIRECT: /* Direct access device mode */ + case TRANSVR_MODE_POLLING: /* Polling mode, read from cache */ + self->mode = run_mode; + break; + default: + SWPS_ERR("%s: non-defined run_mode:%d\n", + __func__, run_mode); + self->mode = DEBUG_TRANSVR_INT_VAL; + return -1; + } + self->eeprom_map_p = map_p; + self->ioexp_obj_p = ioexp_obj_p; + self->ioexp_virt_offset = ioexp_virt_offset; + self->chan_id = chan_id; + self->layout = transvr_type; + self->type = transvr_type; + self->chipset_type = chipset_type; + self->state = STATE_TRANSVR_NEW; + self->info = STATE_TRANSVR_NEW; + self->auto_tx_disable = VAL_TRANSVR_FUNCTION_DISABLE; + strncpy(self->swp_name, swp_name, 32); + mutex_init(&self->lock); + return 0; +} + + +static int +setup_transvr_dsize_attr(struct transvr_obj_s *self){ + + char *emsg = DEBUG_TRANSVR_STR_VAL; + + self->vendor_name = kzalloc((LEN_TRANSVR_M_STR * sizeof(char)), GFP_KERNEL); + if (!self->vendor_name){ + emsg = "vendor_name"; + goto err_setup_d_attr; + } + self->vendor_pn = kzalloc((LEN_TRANSVR_M_STR * sizeof(char)), GFP_KERNEL); + if (!self->vendor_pn){ + emsg = "vendor_pn"; + goto err_setup_d_attr; + } + self->vendor_rev = kzalloc((LEN_TRANSVR_M_STR * sizeof(char)), GFP_KERNEL); + if (!self->vendor_rev){ + emsg = "vendor_rev"; + goto err_setup_d_attr; + } + self->vendor_sn = kzalloc((LEN_TRANSVR_M_STR * sizeof(char)), GFP_KERNEL); + if (!self->vendor_sn){ + emsg = "vendor_sn"; + goto err_setup_d_attr; + } + self->worker_p = NULL; + return 0; + +err_setup_d_attr: + SWPS_ERR("%s: %s kzalloc fail!", __func__, emsg); + return ERR_TRANSVR_UNEXCPT; +} + + +static int +setup_i2c_client(struct transvr_obj_s *self){ + + struct i2c_adapter *adap = NULL; + struct i2c_client *client = NULL; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + adap = i2c_get_adapter(self->chan_id); + if(!adap){ + snprintf(err_msg, sizeof(err_msg), + "can not get adap:%d", self->chan_id); + goto err_setup_i2c_client; + } + client = kzalloc(sizeof(*client), GFP_KERNEL); + if (!client){ + snprintf(err_msg, sizeof(err_msg), + "can not kzalloc client:%d", self->chan_id); + goto err_setup_i2c_client; + } + client->adapter = adap; + self->i2c_client_p = client; + self->i2c_client_p->addr = VAL_TRANSVR_COMID_ARREESS; + return 0; + +err_setup_i2c_client: + SWPS_ERR("%s: %s\n", __func__, err_msg); + return ERR_TRANSVR_UNEXCPT; +} + + +struct transvr_obj_s * +create_transvr_obj(char *swp_name, + int chan_id, + struct ioexp_obj_s *ioexp_obj_p, + int ioexp_virt_offset, + int transvr_type, + int chipset_type, + int run_mode){ + + struct transvr_obj_s *result_p; + struct eeprom_map_s *map_p; + char err_msg[64] = DEBUG_TRANSVR_STR_VAL; + + /* Allocate transceiver object */ + map_p = get_eeprom_map(transvr_type); + if (!map_p){ + snprintf(err_msg, sizeof(err_msg), + "Invalid transvr_type:%d", transvr_type); + goto err_create_transvr_fail; + } + result_p = kzalloc(sizeof(*result_p), GFP_KERNEL); + if (!result_p){ + snprintf(err_msg, sizeof(err_msg), "kzalloc fail"); + goto err_create_transvr_fail; + } + /* Prepare static size attributes */ + if (setup_transvr_ssize_attr(swp_name, + result_p, + map_p, + ioexp_obj_p, + ioexp_virt_offset, + transvr_type, + chipset_type, + chan_id, + run_mode) < 0){ + goto err_create_transvr_sattr_fail; + } + /* Prepare dynamic size attributes */ + if (setup_transvr_dsize_attr(result_p) < 0){ + goto err_create_transvr_dattr_fail; + } + /* Prepare call back functions of object */ + if (setup_transvr_public_cb(result_p, transvr_type) < 0){ + goto err_create_transvr_dattr_fail; + } + /* Prepare call back functions of object */ + if (setup_transvr_private_cb(result_p, transvr_type) < 0){ + goto err_create_transvr_dattr_fail; + } + /* Prepare i2c client object */ + if (setup_i2c_client(result_p) < 0){ + goto err_create_transvr_dattr_fail; + } + return result_p; + +err_create_transvr_dattr_fail: + kfree(result_p->vendor_sn); + kfree(result_p->vendor_rev); + kfree(result_p->vendor_pn); + kfree(result_p->vendor_name); +err_create_transvr_sattr_fail: + kfree(result_p); +err_create_transvr_fail: + SWPS_ERR("%s: %s :%d :%d :%d\n", + __func__, err_msg, chan_id, ioexp_virt_offset, transvr_type); + return NULL; +} + + +static int +_reload_transvr_obj(struct transvr_obj_s *self, + int new_type){ + + struct eeprom_map_s *new_map_p; + struct eeprom_map_s *old_map_p = self->eeprom_map_p; + struct i2c_client *old_i2c_p = self->i2c_client_p; + int old_type = self->type; + + /* Change state to STATE_TRANSVR_INIT */ + self->state = STATE_TRANSVR_INIT; + self->type = new_type; + /* Replace EEPROME map */ + new_map_p = get_eeprom_map(new_type); + if (!new_map_p){ + goto err_private_reload_func_1; + } + self->eeprom_map_p = new_map_p; + /* Reload i2c client */ + if (setup_i2c_client(self) < 0){ + goto err_private_reload_func_2; + } + /* Replace call back functions */ + if (setup_transvr_public_cb(self, new_type) < 0){ + goto err_private_reload_func_3; + } + if (setup_transvr_private_cb(self, new_type) < 0){ + goto err_private_reload_func_3; + } + kfree(old_i2c_p); + return 0; + +err_private_reload_func_3: + SWPS_INFO("%s: init() fail!\n", __func__); + kfree(old_i2c_p); + self->state = STATE_TRANSVR_UNEXCEPTED; + self->type = TRANSVR_TYPE_ERROR; + return -2; + +err_private_reload_func_2: + self->eeprom_map_p = old_map_p; + self->i2c_client_p = old_i2c_p; +err_private_reload_func_1: + self->state = STATE_TRANSVR_UNEXCEPTED; + self->type = old_type; + SWPS_INFO("%s fail! :0x%02x\n", __func__, new_type); + return -1; +} + + +static int +reload_transvr_obj(struct transvr_obj_s *self, + int new_type){ + + int result_val = ERR_TRANSVR_UNEXCPT; + + /* Reload phase */ + result_val = _reload_transvr_obj(self, new_type); + if (result_val < 0){ + SWPS_INFO("%s: reload phase fail! :%d\n", + __func__, result_val); + return EVENT_TRANSVR_RELOAD_FAIL; + } + /* Initial phase */ + result_val = _transvr_init_handler(self); + if (result_val < 0){ + SWPS_INFO("%s: initial phase fail! :%d\n", + __func__, result_val); + } + return result_val; +} + + +int +isolate_transvr_obj(struct transvr_obj_s *self) { + + self->state = STATE_TRANSVR_ISOLATED; + SWPS_INFO("%s: %s be isolated\n", __func__, self->swp_name); + return 0; +} + + +int +resync_channel_tier_2(struct transvr_obj_s *self) { + + int val = TRANSVR_TYPE_ERROR; + + if (self->state == STATE_TRANSVR_ISOLATED) { + return 0; + } + self->i2c_client_p->addr = VAL_TRANSVR_COMID_ARREESS; + val = i2c_smbus_read_byte_data(self->i2c_client_p, + VAL_TRANSVR_COMID_OFFSET); + if (val < 0) { + return -1; + } + return 0; +} + + +/* ----------------------------------------- + * ToDo List + * ----------------------------------------- + * 1. _sfp_detect_class_by_feature() + * => Need check ACC use case. + * 2. _sfp_detect_class_by_1g_ethernet() + * => Need check 0.1G use case. + * 3. Loopback transceiver use case. + * => Less much data + * 4. _qsfp_detect_class_by_extend_comp() + * => Verify 100G CWDM4 + * => Verify Obsolete (assigned before 100G CWDM4 MSA required FEC) + * => Verify 100G CLR4 + * => Verify 100GE-DWDM2 + * => Verify 40G PSM4 Parallel SMF + * => Verify 100G ACC (Active Copper Cable) or 25GAUI C2M ACC. + * => Verify 100G ACC or 25GAUI C2M ACC. + * => Verify 25GBASE-LR + * => Verify 40G Active Cable (XLPPI) + */ + + + + diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/transceiver.h b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/transceiver.h new file mode 100644 index 000000000000..ddd22c38caf0 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/modules/transceiver.h @@ -0,0 +1,792 @@ +#ifndef TRANSCEIVER_H +#define TRANSCEIVER_H + +#include + +/* advanced features control */ +#define TRANSVR_INFO_DUMP_ENABLE (1) +#define TRANSVR_INFO_CACHE_ENABLE (1) +#define TRANSVR_UEVENT_ENABLE (1) + +/* Transceiver type define */ +#define TRANSVR_TYPE_UNKNOW_1 (0x00) +#define TRANSVR_TYPE_UNKNOW_2 (0xff) +#define TRANSVR_TYPE_SFP (0x03) /* Define for SFP, SFP+, SFP28 */ +#define TRANSVR_TYPE_QSFP (0x0c) +#define TRANSVR_TYPE_QSFP_PLUS (0x0d) +#define TRANSVR_TYPE_QSFP_28 (0x11) +#define TRANSVR_TYPE_UNPLUGGED (0xfa) /* Define for ERROR handle */ +#define TRANSVR_TYPE_FAKE (0xfc) /* Define for ERROR handle */ +#define TRANSVR_TYPE_INCONSISTENT (0xfd) /* Define for ERROR handle */ +#define TRANSVR_TYPE_ERROR (0xfe) /* Define for ERROR handle */ + +/* Transceiver class for base info */ +#define TRANSVR_CLASS_UNSPECIFIED (0) +#define TRANSVR_CLASS_ERROR (-26001) +#define TRANSVR_CLASS_1G (26001) +#define TRANSVR_CLASS_10G (26011) +#define TRANSVR_CLASS_25G (26021) +#define TRANSVR_CLASS_40G (26041) +#define TRANSVR_CLASS_100G (26101) +#define TRANSVR_CLASS_NO_SPERARABLE (26901) +#define TRANSVR_CLASS_EXTEND_COMP (26902) +/* Transceiver class for Optical 1G */ +#define TRANSVR_CLASS_OPTICAL (27000) +#define TRANSVR_CLASS_OPTICAL_100 (27001) +#define TRANSVR_CLASS_OPTICAL_1G (27002) +#define TRANSVR_CLASS_OPTICAL_1G_AOC (27003) +#define TRANSVR_CLASS_OPTICAL_1G_SX (27004) +#define TRANSVR_CLASS_OPTICAL_1G_LX (27005) +#define TRANSVR_CLASS_OPTICAL_1G_EX (27006) +/* Transceiver class for Optical 10G */ +#define TRANSVR_CLASS_OPTICAL_10G (27010) +#define TRANSVR_CLASS_OPTICAL_10G_S_AOC (27011) +#define TRANSVR_CLASS_OPTICAL_10G_S_SR (27012) +#define TRANSVR_CLASS_OPTICAL_10G_S_LR (27013) +#define TRANSVR_CLASS_OPTICAL_10G_S_ER (27014) +#define TRANSVR_CLASS_OPTICAL_10G_Q_AOC (27015) +#define TRANSVR_CLASS_OPTICAL_10G_Q_SR (27016) +#define TRANSVR_CLASS_OPTICAL_10G_Q_LR (27017) +#define TRANSVR_CLASS_OPTICAL_10G_Q_ER (27018) +/* Transceiver class for Optical 25G */ +#define TRANSVR_CLASS_OPTICAL_25G (27020) +#define TRANSVR_CLASS_OPTICAL_25G_AOC (27021) +#define TRANSVR_CLASS_OPTICAL_25G_SR (27022) +#define TRANSVR_CLASS_OPTICAL_25G_LR (27023) +#define TRANSVR_CLASS_OPTICAL_25G_ER (27024) +/* Transceiver class for Optical 40G */ +#define TRANSVR_CLASS_OPTICAL_40G (27040) +#define TRANSVR_CLASS_OPTICAL_40G_AOC (27041) +#define TRANSVR_CLASS_OPTICAL_40G_SR4 (27042) +#define TRANSVR_CLASS_OPTICAL_40G_LR4 (27043) +#define TRANSVR_CLASS_OPTICAL_40G_ER4 (27044) +/* Transceiver class for Optical 100G */ +#define TRANSVR_CLASS_OPTICAL_100G (27100) +#define TRANSVR_CLASS_OPTICAL_100G_AOC (27101) +#define TRANSVR_CLASS_OPTICAL_100G_SR4 (27102) +#define TRANSVR_CLASS_OPTICAL_100G_LR4 (27103) +#define TRANSVR_CLASS_OPTICAL_100G_ER4 (27104) +#define TRANSVR_CLASS_OPTICAL_100G_PSM4 (27105) +/* Transceiver class for Copper */ +#define TRANSVR_CLASS_COPPER (28000) +#define TRANSVR_CLASS_COPPER_L1_1G (28001) +#define TRANSVR_CLASS_COPPER_L1_10G (28011) +#define TRANSVR_CLASS_COPPER_L4_10G (28012) +#define TRANSVR_CLASS_COPPER_L1_25G (28021) +#define TRANSVR_CLASS_COPPER_L4_40G (28041) +#define TRANSVR_CLASS_COPPER_L4_100G (28101) +/* Transceiver class for Base-T */ +#define TRANSVR_CLASS_BASE_T_1000 (29001) +#define TRANSVR_CLASS_BASE_T_1000_up (29002) +/* For uevent message */ +#define TRANSVR_UEVENT_KEY_IF "IF_TYPE" +#define TRANSVR_UEVENT_KEY_SP "IF_SPEED" +#define TRANSVR_UEVENT_KEY_LANE "IF_LANE" +#define TRANSVR_UEVENT_UNKNOW "UNKNOW" +#define TRANSVR_IF_KR "KR" +#define TRANSVR_IF_KR4 "KR4" +#define TRANSVR_IF_SR "SR" +#define TRANSVR_IF_SR4 "SR4" +#define TRANSVR_IF_SFI "SFI" +#define TRANSVR_IF_IF_GMII "GMII" +#define TRANSVR_IF_IF_XGMII "XGMII" +#define TRANSVR_IF_SP_100 "100" +#define TRANSVR_IF_SP_1G "1000" +#define TRANSVR_IF_SP_10G "10000" +#define TRANSVR_IF_SP_25G "25000" +#define TRANSVR_IF_SP_40G "40000" +#define TRANSVR_IF_SP_100G "100000" + +/* Transceiver mode define */ +#define TRANSVR_MODE_DIRECT (21000) +#define TRANSVR_MODE_POLLING (21001) + +/* Transceiver state define + * [Note] + * 1. State is used to represent the state of "Transceiver" and "Object". + * 2. State for different target has different means. The description as following: + */ +#define STATE_TRANSVR_CONNECTED (0) /* [Transvr]:Be plugged in. [Obj]:Link up, and work normally. */ +#define STATE_TRANSVR_NEW (-100) /* [Transvr]:(Not used) [Obj]:Create */ +#define STATE_TRANSVR_INIT (-101) /* [Transvr]:Be plugged in. [Obj]:Link up, and in initial process. */ +#define STATE_TRANSVR_ISOLATED (-102) /* [Transvr]:Be plugged in. [Obj]:Isolate, and not provide service. */ +#define STATE_TRANSVR_SWAPPED (-200) /* [Transvr]:Be plugged in. [Obj]:(Not used) */ +#define STATE_TRANSVR_DISCONNECTED (-300) /* [Transvr]:Un-plugged. [Obj]:Link down, and not provide service. */ +#define STATE_TRANSVR_UNEXCEPTED (-901) /* [Transvr]:Any [Obj]:Any, and not in expect case. */ + +/* Task state define */ +#define STATE_T_TASK_WAIT (110) +#define STATE_T_TASK_DONE (0) +#define STATE_T_TASK_INIT (-110) +#define STATE_T_TASK_FAIL (-410) + + +/* Event for task handling */ +#define EVENT_TRANSVR_TASK_WAIT (2101) +#define EVENT_TRANSVR_TASK_DONE (0) +#define EVENT_TRANSVR_TASK_FAIL (-2101) +/* Event for initial handling */ +#define EVENT_TRANSVR_INIT_UP (2201) +#define EVENT_TRANSVR_INIT_DOWN (1) +#define EVENT_TRANSVR_INIT_REINIT (-2201) +#define EVENT_TRANSVR_INIT_FAIL (-2202) +/* Event for others */ +#define EVENT_TRANSVR_RELOAD_FAIL (-2301) +#define EVENT_TRANSVR_EXCEP_INIT (-2401) +#define EVENT_TRANSVR_EXCEP_UP (-2402) +#define EVENT_TRANSVR_EXCEP_DOWN (-2403) +#define EVENT_TRANSVR_EXCEP_SWAP (-2404) +#define EVENT_TRANSVR_EXCEP_EXCEP (-2405) +#define EVENT_TRANSVR_EXCEP_ISOLATED (-2406) +#define EVENT_TRANSVR_I2C_CRASH (-2501) + +/* Transceiver error code define */ +#define ERR_TRANSVR_UNINIT (-201) +#define ERR_TRANSVR_UNPLUGGED (-202) +#define ERR_TRANSVR_ABNORMAL (-203) +#define ERR_TRANSVR_NOSTATE (-204) +#define ERR_TRANSVR_NOTSUPPORT (-205) +#define ERR_TRANSVR_BADINPUT (-206) +#define ERR_TRANSVR_UPDATE_FAIL (-207) +#define ERR_TRANSVR_RELOAD_FAIL (-208) +#define ERR_TRANSVR_INIT_FAIL (-209) +#define ERR_TRANSVR_UNDEFINED (-210) +#define ERR_TRANSVR_TASK_FAIL (-211) +#define ERR_TRANSVR_TASK_BUSY (-212) +#define ERR_TRANSVR_UEVENT_FAIL (-213) +#define ERR_TRANSVR_FUNC_DISABLE (-214) +#define ERR_TRANSVR_I2C_CRASH (-297) +#define ERR_TRNASVR_BE_ISOLATED (-298) +#define ERR_TRANSVR_UNEXCPT (-299) + +/* For debug */ +#define DEBUG_TRANSVR_INT_VAL (-99) +#define DEBUG_TRANSVR_HEX_VAL (0xfe) +#define DEBUG_TRANSVR_STR_VAL "ERROR" + +/* For system internal */ +#define VAL_TRANSVR_COMID_ARREESS (0x50) +#define VAL_TRANSVR_COMID_OFFSET (0x00) +#define VAL_TRANSVR_8472_READY_ADDR (0x51) +#define VAL_TRANSVR_8472_READY_PAGE (-1) +#define VAL_TRANSVR_8472_READY_OFFSET (110) +#define VAL_TRANSVR_8472_READY_BIT (0) +#define VAL_TRANSVR_8472_READY_VALUE (0) +#define VAL_TRANSVR_8472_READY_ABNORMAL (0xff) +#define VAL_TRANSVR_8436_READY_ADDR (0x50) +#define VAL_TRANSVR_8436_READY_PAGE (-1) +#define VAL_TRANSVR_8436_READY_OFFSET (2) +#define VAL_TRANSVR_8436_READY_BIT (0) +#define VAL_TRANSVR_8436_READY_VALUE (0) +#define VAL_TRANSVR_8436_READY_ABNORMAL (0xff) +#define VAL_TRANSVR_8436_PWD_ADDR (0x50) +#define VAL_TRANSVR_8436_PWD_PAGE (-1) +#define VAL_TRANSVR_8436_PWD_OFFSET (123) +#define VAL_TRANSVR_PAGE_FREE (-99) +#define VAL_TRANSVR_PAGE_SELECT_OFFSET (127) +#define VAL_TRANSVR_PAGE_SELECT_DELAY (5) +#define VAL_TRANSVR_TASK_RETRY_FOREVER (-999) +#define VAL_TRANSVR_FUNCTION_DISABLE (-1) +#define STR_TRANSVR_SFP "SFP" +#define STR_TRANSVR_QSFP "QSFP" +#define STR_TRANSVR_QSFP_PLUS "QSFP+" +#define STR_TRANSVR_QSFP28 "QSFP28" + +/* For transvr buf len */ +#define LEN_TRANSVR_S_STR (16) +#define LEN_TRANSVR_M_STR (32) +#define LEN_TRANSVR_L_STR (64) + +/* Optical wavelength */ +#define VAL_OPTICAL_WAVELENGTH_SR (850) +#define VAL_OPTICAL_WAVELENGTH_LR (1310) +#define VAL_OPTICAL_WAVELENGTH_ER (1550) + +/* BCM chip type define */ +#define BCM_CHIP_TYPE_TRIDENT_2 (31001) /* Magnolia, Hudson32i, Spruce */ +#define BCM_CHIP_TYPE_TOMAHAWK (31002) /* Redwood, Cypress */ + +/* Info from transceiver EEPROM */ +struct eeprom_map_s { + int addr_br; int page_br; int offset_br; int length_br; + int addr_cdr; int page_cdr; int offset_cdr; int length_cdr; + int addr_comp_rev; int page_comp_rev; int offset_comp_rev; int length_comp_rev; + int addr_connector; int page_connector; int offset_connector; int length_connector; + int addr_diag_type; int page_diag_type; int offset_diag_type; int length_diag_type; + int addr_extbr; int page_extbr; int offset_extbr; int length_extbr; + int addr_ext_id; int page_ext_id; int offset_ext_id; int length_ext_id; + int addr_id; int page_id; int offset_id; int length_id; + int addr_len_sm; int page_len_sm; int offset_len_sm; int length_len_sm; + int addr_len_smf; int page_len_smf; int offset_len_smf; int length_len_smf; + int addr_len_om1; int page_len_om1; int offset_len_om1; int length_len_om1; + int addr_len_om2; int page_len_om2; int offset_len_om2; int length_len_om2; + int addr_len_om3; int page_len_om3; int offset_len_om3; int length_len_om3; + int addr_len_om4; int page_len_om4; int offset_len_om4; int length_len_om4; + int addr_option; int page_option; int offset_option; int length_option; + int addr_rate_id; int page_rate_id; int offset_rate_id; int length_rate_id; + int addr_rx_am; int page_rx_am; int offset_rx_am; int length_rx_am; + int addr_rx_em; int page_rx_em; int offset_rx_em; int length_rx_em; + int addr_rx_los; int page_rx_los; int offset_rx_los; int length_rx_los; + int addr_rx_power; int page_rx_power; int offset_rx_power; int length_rx_power; + int addr_soft_rs0; int page_soft_rs0; int offset_soft_rs0; int length_soft_rs0; + int addr_soft_rs1; int page_soft_rs1; int offset_soft_rs1; int length_soft_rs1; + int addr_temp; int page_temp; int offset_temp; int length_temp; + int addr_trancomp; int page_trancomp; int offset_trancomp; int length_trancomp; + int addr_trancomp_ext; int page_trancomp_ext; int offset_trancomp_ext; int length_trancomp_ext; + int addr_tx_bias; int page_tx_bias; int offset_tx_bias; int length_tx_bias; + int addr_tx_disable; int page_tx_disable; int offset_tx_disable; int length_tx_disable; + int addr_tx_eq; int page_tx_eq; int offset_tx_eq; int length_tx_eq; + int addr_tx_fault; int page_tx_fault; int offset_tx_fault; int length_tx_fault; + int addr_tx_power; int page_tx_power; int offset_tx_power; int length_tx_power; + int addr_vendor_name; int page_vendor_name; int offset_vendor_name; int length_vendor_name; + int addr_vendor_pn; int page_vendor_pn; int offset_vendor_pn; int length_vendor_pn; + int addr_vendor_rev; int page_vendor_rev; int offset_vendor_rev; int length_vendor_rev; + int addr_vendor_sn; int page_vendor_sn; int offset_vendor_sn; int length_vendor_sn; + int addr_voltage; int page_voltage; int offset_voltage; int length_voltage; + int addr_wavelength; int page_wavelength; int offset_wavelength; int length_wavelength; +}; + + +struct transvr_worker_s; + +/* Class of transceiver object */ +struct transvr_obj_s { + + /* ========== Object private property ========== + * [Prop]: id + * [Desc]: Type of serial transceiver. + * [Note]: SFP:03h / QSFP:0Ch / QSPF+:0Dh /QSFP28:11h + */ + uint8_t id; + + /* [Prop]: connector + * [Desc]: Connector type. + * [Note]: SFP : A0h / 2 + * QSFP: 00h / 130 + */ + uint8_t connector; + + /* [Prop]: transvr_comp + * [Desc]: Transceiver compliance code. + * [Note]: SFP: SFF-8472 + * - Normal : A0h / offset 3-10 + * - Extended: A0h / offset 36 + * QSFP: SFF-8436 & SFF-8636 + * - Normal : 00h / offset 131-138 + * - Extended: 00h / offset 192 + */ + uint8_t transvr_comp[8]; + uint8_t transvr_comp_ext; + + /* [Prop]: vendor_name + * [Desc]: SFP vendor name (ASCII 16 byte char). + * [Note]: ex:FINISAR CORP. + */ + char *vendor_name; + + /* [Prop]: vendor_pn + * [Desc]: Part number provided by SFP vendor (ASCII 16 byte char). + * [Note]: + */ + char *vendor_pn; + + /* [Prop]: vendor_rev + * [Desc]: Revision level for part number provided by vendor (ASCII 4 byte char). + * [Note]: + */ + char *vendor_rev; + + /* [Prop]: vendor_sn + * [Desc]: Serial number provided by vendor (ASCII 16 byte char). + * [Note]: + */ + char *vendor_sn; + + /* [Prop]: Extended identifier + * [Desc]: SFP: + * => None + * + * QSFP: + * => This byte contained two information: + * (1) Power consumption class + * (2) CDR function present + * [Note]: Bit description as below: + * [SFP] + * None + * + * [QSFP] + * (1) Power consumption class: + * Class 1: 1.5W (Bit6-7 = 00:) + * Class 2: 2.0W (Bit6-7 = 01:) + * Class 3: 2.5W (Bit6-7 = 10:) + * Class 4: 3.5W (Bit6-7 = 11:) + * Class 5: 4.0W (Bit0-1 = 01:) + * Class 6: 4.5W (Bit0-1 = 10:) + * Class 7: 5.0W (Bit0-1 = 11:) + * (2) CDR function present: + * Bit2: 0 = No CDR in RX + * 1 = CDR present in RX + * Bit3: 0 = No CDR in TX + * 1 = CDR present in TX + */ + uint8_t ext_id; + + /* [Prop]: br + * [Desc]: Nominal bit rate, units of 100 MBits/sec. + * [Note]: SFP:03h / QSFP:0Ch / QSPF+:0Dh + * has val: 0x67 + * no val : + */ + uint8_t br; + + /* [Prop]: extbr + * [Desc]: Extended br (00h/222) + * [Desc]: Nominal bit rate per channel, units of 250 Mbps. + * Complements. Byte 140. See Table 32A. + */ + uint8_t extbr; + + /* [Prop]: len_sm + * [Desc]: Length (single mode)-(100's)m + * [Note]: This value specifies the link length that is supported by the transceiver + * while operating in compliance with the applicable standards using single mode + * fiber. The value is in units of 100 meters. A value of 255 means that the + * transceiver supports a link length greater than 25.4 km. A value of zero means + * that the transceiver does not support single mode fiber or that the length + * information must be determined from the transceiver technology. + */ + int len_sm; + + /* [Prop]: len_smf + * [Desc]: Length (single mode)-km + * [Note]: Addition to EEPROM data from original GBIC definition. This value specifies + * the link length that is supported by the transceiver while operating in + * compliance with the applicable standards using single mode fiber. The value + * is in units of kilometers. A value of 255 means that the transceiver supports + * a link length greater than 254 km. A value of zero means that the transceiver + * does not support single mode fiber or that the length information must be + * determined from the transceiver technology. + */ + int len_smf; + + /* [Prop]: len_om1 + * [Desc]: Link length supported for 62.5 um OM1 fiber, units of 10 m + * [Note]: The value is in units of 10 meters. A value of 255 means that the + * transceiver supports a link length greater than 2.54 km. A value of + * zero means that the transceiver does not support 50 micron multi-mode + * fiber or that the length information must be determined from the transceiver + * technology. + */ + int len_om1; + + /* [Prop]: len_om2 + * [Desc]: Link length supported for 50 um OM2 fiber, units of 10 m + * [Note]: The value is in units of 10 meters. A value of 255 means that the + * transceiver supports a link length greater than 2.54 km. A value of + * zero means that the transceiver does not support 50 micron multi-mode + * fiber or that the length information must be determined from the transceiver + * technology. + */ + int len_om2; + + /* [Prop]: len_om3 + * [Desc]: Length (50um, OM3) + * [Note]: This value specifies link length that is supported by the transceiver while + * operating in compliance with applicable standards using 50 micron multimode + * OM3 [2000 MHz*km] fiber. The value is in units of 10 meters. A value of 255 + * means that the transceiver supports a link length greater than 2.54 km. A value + * of zero means that the transceiver does not support 50 micron multimode fiber + * or that the length information must be determined from the transceiver technology. + */ + int len_om3; + + /* [Prop]: len_om4 + * [Desc]: Length (50um, OM4) and Length (Active Cable or Copper) + * [Note]: For optical links, this value specifies link length that is supported by the + * transceiver while operating in compliance with applicable standards using 50 micron + * multimode OM4 [4700 MHz*km] fiber. The value is in units of 10 meters. A value of + * 255 means that the transceiver supports a link length greater than 2.54 km. A value + * of zero means that the transceiver does not support 50 micron multimode fiber or that + * the length information must be determined from the transceiver codes specified in Table 5-3. + * + * For copper links, this value specifies minimum link length supported by the transceiver + * while operating in compliance with applicable standards using copper cable. For active + * cable, this value represents actual length. The value is in units of 1 meter. A value of 255 + * means the transceiver supports a link length greater than 254 meters. A value of zero means + * the transceiver does not support copper or active cables or the length information must be + * determined from transceiver technology. Further information about cable design, equalization, + * and connectors is usually required to guarantee meeting a particular length requirement. + */ + int len_om4; + + /* [Prop]: comp_rev + * [Desc]: SFF spec revision compliance + * [Note]: Indicates which revision of SFF SFF-8472 (SFP) / SFF-8636 (QSFP) the transceiver + * complies with. (unsigned integer) + */ + uint8_t comp_rev; + + /* [Prop]: CDR + * [Desc]: For transceivers with CDR capability, setting the CDR to ON engages the internal + * retiming function. Setting the CDR to OFF enables an internal bypassing mode ,which + * directs traffic around the internal CDR. (Reference: SFF-8636) + * [Note]: value=0xff: ON. + * value=0x00: OFF. + */ + uint8_t cdr; + + /* [Prop]: rate_id + * [Desc]: Soft Rate Select 0(RX). + * [Note]: 1. Addr: A0h / Offset: 13 + * 2. Value description: + * 00h Unspecified + * 01h SFF-8079 (4/2/1G Rate_Select & AS0/AS1) + * 02h SFF-8431 (8/4/2G Rx Rate_Select only) + * 03h Unspecified * + * 04h SFF-8431 (8/4/2G Tx Rate_Select only) + * 05h Unspecified * + * 06h SFF-8431 (8/4/2G Independent Rx & Tx Rate_select) + * 07h Unspecified * + * 08h FC-PI-5 (16/8/4G Rx Rate_select only) High=16G only, Low=8G/4G + * 09h Unspecified * + * 0Ah FC-PI-5 (16/8/4G Independent Rx, Tx Rate_select) High=16G only, + * Low=8G/4G + * 0Bh Unspecified * + * 0Ch FC-PI-6 (32/16/8G Independent Rx, Tx Rate_Select) + * High=32G only, Low = 16G/8G + * 0Dh Unspecified * + * 0Eh 10/8G Rx and Tx Rate_Select controlling the operation or locking + * modes of the internal signal conditioner, retimer or CDR, according + * to the logic table defined in Table 10-2, High Bit Rate + * (10G) =9.95-11.3 Gb/s; Low Bit Rate (8G) = 8.5 Gb/s. In this mode, + * the default value of bit 110.3 (Soft Rate Select RS(0), Table 9-11) + * and of bit 118.3 (Soft Rate Select RS(1), Table 10-1) is 1. + * 0Fh Unspecified * + * 10h-FFh Unallocated + */ + int rate_id; + + /* [Prop]: soft_rs0 + * [Desc]: Soft Rate Select 0(RX). + * [Note]: 1. Writing '1' selects full bandwidth operation. + * 2. This bit is "OR'd with the hard Rate_Select, AS(0) or RS(0) pin value. + * 3. Default at power up is logic zero/low + * 4. Addr: A2h / Offset: 110 / Bit: 3 + */ + uint8_t soft_rs0; + + /* [Prop]: soft_rs1 + * [Desc]: Soft Rate Select 1(TX). + * [Note]: 1. Writing '1' selects full bandwidth TX operation. + * 2. This bit is "OR'd with the hard Rate_Select, AS(1) or RS(1) pin value. + * 3. Default at power up is logic zero/low + * 4. Addr: A2h / Offset: 118 / Bit: 3 + */ + uint8_t soft_rs1; + + /* [Prop]: diag_type + * [Desc]: DIAGNOSTIC MONITORING TYPE (A0h/92) + * [Note]: Description in SFF-8472 as below: + * Bit7: Reserved for legacy diagnostic implementations. Must be '0' for compliance + * with this document. + * Bit6: Digital diagnostic monitoring implemented (described in this document). + * Must be '1' for compliance with this document. + * Bit5 Internally calibrated + * Bit4 Externally calibrated + * Bit3 Received power measurement type.0 = OMA, 1 = average power + * Bit2 Address change required see section above, "addressing modes" + * Bit1-0 Unallocated + */ + uint8_t diag_type; + + /* [Prop]: curr_temp + * [Desc]: Transceiver Current Temperature (A2h/96-97) + * [Note]: 1. Dependent on diag_type. + * 2. 96: High byte + * 3. 97: Low byte + * 4. This feature only for SFP + */ + uint8_t curr_temp[2]; + + /* [Prop]: curr_vol + * [Desc]: Transceiver Current Voltage (SFP:A2h/108-109; QSFP:00h/22-23) + * [Note]: 1. Dependent on diag_type. + * 2. 98: High byte + * 3. 99: Low byte + * 4. This feature only for SFP + * 5. Internally measured transceiver supply voltage. Represented + * as a 16 bit unsigned integer with the voltage defined as the + * full 16 bit value (0-65535) with LSB equal to 100 uVolt, + * yielding a total range of 0 to +6.55 Volts + */ + uint8_t curr_voltage[2]; + + /* [Prop]: curr_tx_bias + * [Desc]: Transceiver TX Bias Current (SFP:A2h/100-101; QSFP:00h/26-27) + * [Note]: 1. Dependent on diag_type. + * 2. 100: High byte + * 3. 101: Low byte + * 4. This feature only for SFP + * 5. Measured TX bias current in uA. Represented as a 16 bit unsigned + * integer with the current defined as the full 16 bit value (0-65535) + * with LSB equal to 2 uA, yielding a total range of 0 to 131 mA. + * Accuracy is vendor specific but must be better than 10% of the + * manufacturer's nominal value over specified operating temperature + * and voltage. + */ + uint8_t curr_tx_bias[8]; + + /* [Prop]: curr_tx_power + * [Desc]: Transceiver TX Output Power (A2h/102-103) + * [Note]: 1. Dependent on diag_type. + * 2. 102: High byte + * 3. 103: Low byte + * 4. This feature only for SFP + * 5. Measured TX output power in mW. Represented as a 16 bit unsigned + * integer with the power defined as the full 16 bit value (0-65535) + * with LSB equal to 0.1 uW, yielding a total range of 0 to 6.5535 mW + * (~ -40 to +8.2 dBm). Data is assumed to be based on measurement of + * laser monitor photodiode current. It is factory calibrated to absolute + * units using the most representative fiber output type. Accuracy is + * vendor specific but must be better than 3dB over specified temperature + * and voltage. Data is not valid when the transmitter is disabled. + */ + uint8_t curr_tx_power[8]; + + /* [Prop]: curr_tx_power + * [Desc]: Transceiver TX Output Power (A2h/102-103) + * [Note]: 1. Dependent on diag_type. + * 2. 102: High byte + * 3. 103: Low byte + * 4. This feature only for SFP + * 5. Measured RX received optical power in mW. Value can represent either + * average received power or OMA depending upon how bit 3 of byte 92 (A0h) + * is set. Represented as a 16 bit unsigned integer with the power defined + * as the full 16 bit value (0-65535) with LSB equal to 0.1 uW, yielding a + * total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm). Absolute accuracy is + * dependent upon the exact optical wavelength. For the vendor specified + * wavelength, accuracy shall be better than 3dB over specified temperature + * and voltage. + */ + uint8_t curr_rx_power[8]; + + /* [Prop]: wavelength + * [Desc]: Wavelength or Copper Cable Attenuation + * [Note]: (Following is info from SFF-8636) + * For optical free side devices, this parameter identifies the nominal + * transmitter output wavelength at room temperature. This parameter is a + * 16-bit hex value with Byte 186 as high order byte and Byte 187 as low + * order byte. The laser wavelength is equal to the 16-bit integer value + * divided by 20 in nm (units of 0.05 nm). This resolution should be adequate + * to cover all relevant wavelengths yet provide enough resolution for all + * expected DWDM applications. For accurate representation of controlled + * wavelength applications, this value should represent the center of the + * guaranteed wavelength range. If the free side device is identified as + * copper cable these registers will be used to define the cable attenuation. + * An indication of 0 dB attenuation refers to the case where the attenuation + * is not known or is unavailable. + * Byte 186 (00-FFh) is the copper cable attenuation at 2.5 GHz in units of 1 dB. + * Byte 187 (00-FFh) is the copper cable attenuation at 5.0 GHz in units of 1 dB. + */ + uint8_t wavelength[2]; + + /* [Prop]: Amplitude control + * [Desc]: Amplitude control + * [Note]: QSFP28 => SFF-8636 03H Byte-238/239 + */ + uint8_t rx_am[2]; + + /* [Prop]: Emphasis control + * [Desc]: Emphasis control + * [Note]: SFP+/28 => SFF-8472 A2H Byte-115 + * QSFP28 => SFF-8636 03H Byte-236/237 + */ + uint8_t rx_em[2]; + + /* [Prop]: Soft Rx LOS + * [Desc]: Soft Rx LOS which provide by transceiver + * [Note]: (Following is info from SFF-8636) + * Byte 3: + * - Bit 0: L-Rx1 LOS + * - Bit 1: L-Rx2 LOS + * - Bit 2: L-Rx3 LOS + * - Bit 3: L-Rx4 LOS + */ + uint8_t rx_los; + + /* [Prop]: Soft Tx Disable + * [Desc]: Soft Tx Disable which provide by transceiver + * [Note]: (Following is info from SFF-8636) + * Byte 86: + * - Bit 0: Tx1 Disable + * - Bit 1: Tx2 Disable + * - Bit 2: Tx3 Disable + * - Bit 3: Tx4 Disable + */ + uint8_t tx_disable; + + /* [Prop]: Soft Tx Fault + * [Desc]: Soft Tx Fault which provide by transceiver + * [Note]: (Following is info from SFF-8636) + * Byte 86: + * - Bit 0: Tx1 Fault + * - Bit 1: Tx2 Fault + * - Bit 2: Tx3 Fault + * - Bit 3: Tx4 Fault + */ + uint8_t tx_fault; + + /* [Prop]: Transceiver EQUALIZATION + * [Desc]: Transceiver EQUALIZATION + * [Note]: SFP+/28 => SFF-8472 A2H Byte-114 + * QSFP28 => SFF-8636 03H Byte-234/235 + */ + uint8_t tx_eq[2]; + + /* [Prop]: OPTION VALUES + * [Desc]: The bits in the option field shall specify the options implemented in the transceiver. + * [Note]: SFP+/28 => SFF-8472 A0H Byte-64/65 + * QSFP+/28 => SFF-8636 00H Byte-193/195 + */ + uint8_t option[3]; + + + /* ========== Object private property ========== + */ + struct device *transvr_dev_p; + struct eeprom_map_s *eeprom_map_p; + struct i2c_client *i2c_client_p; + struct ioexp_obj_s *ioexp_obj_p; + struct transvr_worker_s *worker_p; + struct mutex lock; + char swp_name[32]; + int auto_config; + int auto_tx_disable; + int chan_id; + int chipset_type; + int curr_page; + int info; + int ioexp_virt_offset; + int lane_id[8]; + int layout; + int mode; + int retry; + int state; + int temp; + int type; + + /* ========== Object public functions ========== + */ + int (*get_id)(struct transvr_obj_s *self); + int (*get_ext_id)(struct transvr_obj_s *self); + int (*get_connector)(struct transvr_obj_s *self); + int (*get_vendor_name)(struct transvr_obj_s *self, char *buf_p); + int (*get_vendor_pn)(struct transvr_obj_s *self, char *buf_p); + int (*get_vendor_rev)(struct transvr_obj_s *self, char *buf_p); + int (*get_vendor_sn)(struct transvr_obj_s *self, char *buf_p); + int (*get_power_cls)(struct transvr_obj_s *self); + int (*get_br)(struct transvr_obj_s *self); + int (*get_len_sm)(struct transvr_obj_s *self); + int (*get_len_smf)(struct transvr_obj_s *self); + int (*get_len_om1)(struct transvr_obj_s *self); + int (*get_len_om2)(struct transvr_obj_s *self); + int (*get_len_om3)(struct transvr_obj_s *self); + int (*get_len_om4)(struct transvr_obj_s *self); + int (*get_comp_rev)(struct transvr_obj_s *self); + int (*get_comp_eth_1)(struct transvr_obj_s *self); + int (*get_comp_eth_10)(struct transvr_obj_s *self); + int (*get_comp_eth_10_40)(struct transvr_obj_s *self); + int (*get_comp_extend)(struct transvr_obj_s *self); + int (*get_cdr)(struct transvr_obj_s *self); + int (*get_rate_id)(struct transvr_obj_s *self); + int (*get_soft_rs0)(struct transvr_obj_s *self); + int (*get_soft_rs1)(struct transvr_obj_s *self); + int (*get_info)(struct transvr_obj_s *self); + int (*get_if_type)(struct transvr_obj_s *self, char *buf_p); + int (*get_if_speed)(struct transvr_obj_s *self, char *buf_p); + int (*get_if_lane)(struct transvr_obj_s *self, char *buf_p); + int (*get_curr_temp)(struct transvr_obj_s *self, char *buf_p); + int (*get_curr_vol)(struct transvr_obj_s *self, char *buf_p); + int (*get_soft_rx_los)(struct transvr_obj_s *self, char *buf_p); + int (*get_soft_tx_disable)(struct transvr_obj_s *self, char *buf_p); + int (*get_soft_tx_fault)(struct transvr_obj_s *self, char *buf_p); + int (*get_auto_tx_disable)(struct transvr_obj_s *self, char *buf_p); + int (*get_tx_bias)(struct transvr_obj_s *self, char *buf_p); + int (*get_tx_power)(struct transvr_obj_s *self, char *buf_p); + int (*get_rx_power)(struct transvr_obj_s *self, char *buf_p); + int (*get_tx_eq)(struct transvr_obj_s *self, char *buf_p); + int (*get_rx_am)(struct transvr_obj_s *self, char *buf_p); + int (*get_rx_em)(struct transvr_obj_s *self, char *buf_p); + int (*get_wavelength)(struct transvr_obj_s *self, char *buf_p); + int (*set_cdr)(struct transvr_obj_s *self, int input_val); + int (*set_soft_rs0)(struct transvr_obj_s *self, int input_val); + int (*set_soft_rs1)(struct transvr_obj_s *self, int input_val); + int (*set_soft_tx_disable)(struct transvr_obj_s *self, int input_val); + int (*set_auto_tx_disable)(struct transvr_obj_s *self, int input_val); + int (*set_tx_eq)(struct transvr_obj_s *self, int input_val); + int (*set_rx_am)(struct transvr_obj_s *self, int input_val); + int (*set_rx_em)(struct transvr_obj_s *self, int input_val); + + /* ========== Object private functions ========== + */ + int (*init)(struct transvr_obj_s *self); + int (*clean)(struct transvr_obj_s *self); + int (*check)(struct transvr_obj_s *self); + int (*update_all)(struct transvr_obj_s *self, int show_err); + int (*fsm_4_direct)(struct transvr_obj_s* self, char *caller_name); + int (*fsm_4_polling)(struct transvr_obj_s* self, char *caller_name); + int (*send_uevent)(struct transvr_obj_s* self, enum kobject_action u_action); + int (*dump_all)(struct transvr_obj_s* self); +}; + + +/* For AVL Mapping */ +struct transvr_avl_s { + char vendor_name[32]; + char vendor_pn[32]; + int (*init)(struct transvr_obj_s *self); +}; + + +/* Worker for long term task of transceiver */ +struct transvr_worker_s { + /* Task Parameter */ + struct transvr_obj_s *transvr_p; + struct transvr_worker_s *next_p; + struct transvr_worker_s *pre_p; + unsigned long trigger_time; + char func_name[64]; + int retry; + int state; + + /* Task private data */ + void *p_data; + + /* Call back function */ + int (*main_task)(struct transvr_worker_s *task); + int (*post_task)(struct transvr_worker_s *task); +}; + + +struct transvr_obj_s * +create_transvr_obj(char *swp_name, + int chan_id, + struct ioexp_obj_s *ioexp_obj_p, + int ioexp_virt_offset, + int transvr_type, + int chipset_type, + int run_mode); + +void lock_transvr_obj(struct transvr_obj_s *self); +void unlock_transvr_obj(struct transvr_obj_s *self); +int isolate_transvr_obj(struct transvr_obj_s *self); + +int resync_channel_tier_2(struct transvr_obj_s *self); + +void alarm_msg_2_user(struct transvr_obj_s *self, char *emsg); + +#endif /* TRANSCEIVER_H */ + + + + diff --git a/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/utils/inventec_d7264_util.py b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/utils/inventec_d7264_util.py new file mode 100755 index 000000000000..18853b7b2400 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/d7264q28b/utils/inventec_d7264_util.py @@ -0,0 +1,241 @@ +#!/usr/bin/env python +# +# Copyright (C) 2017 Inventec, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +""" +Usage: %(scriptName)s [options] command object + +options: + -h | --help : this help message + -d | --debug : run with debug mode + -f | --force : ignore error during installation or clean +command: + install : install drivers and generate related sysfs nodes + clean : uninstall drivers and remove related sysfs nodes +""" + +import os +import commands +import sys, getopt +import logging +import re +import time +from collections import namedtuple + +DEBUG = False +args = [] +FORCE = 0 +i2c_prefix = '/sys/bus/i2c/devices/' + + +if DEBUG == True: + print sys.argv[0] + print 'ARGV :', sys.argv[1:] + + +def main(): + global DEBUG + global args + global FORCE + + if len(sys.argv)<2: + show_help() + + options, args = getopt.getopt(sys.argv[1:], 'hdf', ['help', + 'debug', + 'force', + ]) + if DEBUG == True: + print options + print args + print len(sys.argv) + + for opt, arg in options: + if opt in ('-h', '--help'): + show_help() + elif opt in ('-d', '--debug'): + DEBUG = True + logging.basicConfig(level=logging.INFO) + elif opt in ('-f', '--force'): + FORCE = 1 + else: + logging.info('no option') + for arg in args: + if arg == 'install': + install() + elif arg == 'clean': + uninstall() + else: + show_help() + + + return 0 + +def show_help(): + print __doc__ % {'scriptName' : sys.argv[0].split("/")[-1]} + sys.exit(0) + +def show_log(txt): + if DEBUG == True: + print "[D7264]"+txt + return + +def exec_cmd(cmd, show): + logging.info('Run :'+cmd) + status, output = commands.getstatusoutput(cmd) + show_log (cmd +"with result:" + str(status)) + show_log (" output:"+output) + if status: + logging.info('Failed :'+cmd) + if show: + print('Failed :'+cmd) + return status, output + +instantiate =[ +#'echo pca9545 0x70> /sys/bus/i2c/devices/i2c-0/new_device', +#'echo pca9548 0x72> /sys/bus/i2c/devices/i2c-1/new_device', +#'echo pca9548 0x72> /sys/bus/i2c/devices/i2c-2/new_device', +#'echo pca9548 0x72> /sys/bus/i2c/devices/i2c-3/new_device', +#'echo pca9548 0x72> /sys/bus/i2c/devices/i2c-4/new_device', +#'echo inv_psoc 0x66> /sys/bus/i2c/devices/i2c-5/new_device', +#'echo inv_cpld 0x55> /sys/bus/i2c/devices/i2c-5/new_device', +'echo inv_eeprom 0x53> /sys/bus/i2c/devices/i2c-0/new_device'] + +drivers =[ +'lpc_ich', +'i2c-i801', +'i2c-mux', +'i2c-mux-pca954x', +'i2c-dev', +'inv_eeprom', +'inv_platform', +'inv_psoc', +'inv_cpld', +'swps'] + + + +def system_install(): + global FORCE + + #remove default drivers to avoid modprobe order conflicts + status, output = exec_cmd("rmmod i2c_ismt ", 1) + status, output = exec_cmd("rmmod i2c-i801 ", 1) + #install drivers + for i in range(0,len(drivers)): + status, output = exec_cmd("modprobe "+drivers[i], 1) + if status: + print output + if FORCE == 0: + return status + + #instantiate devices + for i in range(0,len(instantiate)): + time.sleep(1) + status, output = exec_cmd(instantiate[i], 1) + if status: + print output + if FORCE == 0: + return status + + for i in range(10,17): + status, output =exec_cmd("echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-0/i2c-2/i2c-"+str(i)+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + for i in range(18,25): + status, output =exec_cmd("echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-0/i2c-3/i2c-"+str(i)+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + for i in range(26,33): + status, output =exec_cmd("echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-0/i2c-4/i2c-"+str(i)+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + for i in range(34,41): + status, output =exec_cmd("echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-0/i2c-5/i2c-"+str(i)+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + for i in range(42,49): + status, output =exec_cmd("echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-0/i2c-6/i2c-"+str(i)+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + for i in range(50,57): + status, output =exec_cmd("echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-0/i2c-7/i2c-"+str(i)+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + for i in range(58,65): + status, output =exec_cmd("echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-0/i2c-8/i2c-"+str(i)+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + for i in range(66,73): + status, output =exec_cmd("echo sff8436 0x50 > /sys/bus/i2c/devices/i2c-0/i2c-9/i2c-"+str(i)+"/new_device", 1) + if status: + print output + if FORCE == 0: + return status + return + + +def system_ready(): + if not device_found(): + return False + return True + +def install(): + if not device_found(): + print "No device, installing...." + status = system_install() + if status: + if FORCE == 0: + return status + else: + print " D7264 devices detected...." + return + +def uninstall(): + global FORCE + #uninstall drivers + for i in range(len(drivers)-1,-1,-1): + status, output = exec_cmd("rmmod "+drivers[i], 1) + if status: + print output + if FORCE == 0: + return status + return + +def device_found(): + ret1, log = exec_cmd("ls "+i2c_prefix+"*0072", 0) + ret2, log = exec_cmd("ls "+i2c_prefix+"i2c-2", 0) + return not(ret1 or ret2) + +if __name__ == "__main__": + main() + + + diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/changelog b/platform/broadcom/sonic-platform-modules-inventec/debian/changelog index 9d33aa418ef5..e49ed14c3e21 100644 --- a/platform/broadcom/sonic-platform-modules-inventec/debian/changelog +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/changelog @@ -1,3 +1,8 @@ +sonic-inventec-platform-modules (1.1.0) unstable; urgency=low + * Add support for Inventec d7264 + + -- developer Tue, 17 Apr 2018 15:27:30 +0800 + sonic-inventec-platform-modules (1.1.0) unstable; urgency=low * Add support for Inventec d7054 diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/control b/platform/broadcom/sonic-platform-modules-inventec/debian/control index 27258c9226c3..9368de788ce9 100644 --- a/platform/broadcom/sonic-platform-modules-inventec/debian/control +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/control @@ -15,3 +15,7 @@ Architecture: amd64 Depends: linux-image-3.16.0-5-amd64 Description: kernel modules for platform devices such as fan, led +Package: platform-modules-d7264q28b +Architecture: amd64 +Depends: linux-image-3.16.0-5-amd64 +Description: kernel modules for platform devices such as fan, led diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.init b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.init new file mode 100644 index 000000000000..87c145a95452 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.init @@ -0,0 +1,40 @@ +#!/bin/bash + +### BEGIN INIT INFO +# Provides: setup-board +# Required-Start: +# Required-Stop: +# Should-Start: +# Should-Stop: +# Default-Start: S +# Default-Stop: 0 6 +# Short-Description: Setup Inventec d7054q28b board. +### END INIT INFO + +case "$1" in +start) + echo -n "Setting up board... " + + depmod -a + /usr/local/bin/inventec_d7264_util.py -f install + echo "done." + ;; + +stop) + + /usr/local/bin/inventec_d7264_util.py -f clean + echo "done." + + ;; + +force-reload|restart) + echo "Not supported" + ;; + +*) + echo "Usage: /etc/init.d/platform-modules-d7264q28b.init {start|stop}" + exit 1 + ;; +esac + +exit 0 diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.install b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.install new file mode 100644 index 000000000000..dba76a7d05c1 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.install @@ -0,0 +1 @@ +d7264q28b/utils/inventec_d7264_util.py usr/local/bin diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.upstart b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.upstart new file mode 100644 index 000000000000..a438cb7bc7e9 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/platform-modules-d7264q28b.upstart @@ -0,0 +1,5 @@ +description "SONiC platform service" + +respawn + +exec /usr/local/bin/inventec_d7264_util.py -f install diff --git a/platform/broadcom/sonic-platform-modules-inventec/debian/rules b/platform/broadcom/sonic-platform-modules-inventec/debian/rules index 6ead4c21de50..9c3dcf4df8a3 100755 --- a/platform/broadcom/sonic-platform-modules-inventec/debian/rules +++ b/platform/broadcom/sonic-platform-modules-inventec/debian/rules @@ -14,7 +14,7 @@ export INSTALL_MOD_DIR:=extra KVERSION ?= $(shell uname -r) KERNEL_SRC := /lib/modules/$(KVERSION) MOD_SRC_DIR:= $(shell pwd) -MODULE_DIRS:= d7032q28b d7054q28b +MODULE_DIRS:= d7032q28b d7054q28b d7264q28b %: dh $@ From c4e2f3e6303381185a9a83273666670ea34fd144 Mon Sep 17 00:00:00 2001 From: Volodymyr Samotiy Date: Wed, 15 Aug 2018 02:05:07 +0300 Subject: [PATCH 146/180] [mellanox]: Update hw-mgmt service with the stop action (#1929) Signed-off-by: Volodymyr Samotiy --- .../mellanox/hw-management/Add-systemd-service-config.patch | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/platform/mellanox/hw-management/Add-systemd-service-config.patch b/platform/mellanox/hw-management/Add-systemd-service-config.patch index ce16bb712ee1..bef62b9ea3e7 100644 --- a/platform/mellanox/hw-management/Add-systemd-service-config.patch +++ b/platform/mellanox/hw-management/Add-systemd-service-config.patch @@ -29,7 +29,7 @@ new file mode 100644 index 0000000..d18916d --- /dev/null +++ b/debian/hw-management.service -@@ -0,0 +1,10 @@ +@@ -0,0 +1,11 @@ +[Unit] +Description=Mellanox Hardware Management + @@ -37,6 +37,7 @@ index 0000000..d18916d +Type=oneshot +EnvironmentFile=/host/machine.conf +ExecStart=/bin/bash -c "/etc/mlnx/mlnx-hw-management start" ++ExecStop=/bin/bash -c "/etc/mlnx/mlnx-hw-management stop" + +[Install] +WantedBy=multi-user.target From f0d4a07a20dcce6ebf115ef025518b129f574c0f Mon Sep 17 00:00:00 2001 From: Mykola F <37578614+mykolaf@users.noreply.github.com> Date: Wed, 15 Aug 2018 16:02:03 +0300 Subject: [PATCH 147/180] [submodule] update snmpagent pointer (#1930) --- src/sonic-snmpagent | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-snmpagent b/src/sonic-snmpagent index ae99de071b33..b180f4423a6c 160000 --- a/src/sonic-snmpagent +++ b/src/sonic-snmpagent @@ -1 +1 @@ -Subproject commit ae99de071b332882aa3ac1e163188af93f602231 +Subproject commit b180f4423a6cd205009f2aed19c2bac441a2dfd0 From 9f545456c9cfa2cec188dc8f10d458a37b866bd4 Mon Sep 17 00:00:00 2001 From: cawand <39776867+cawand@users.noreply.github.com> Date: Wed, 15 Aug 2018 21:41:12 -0700 Subject: [PATCH 148/180] Added picocom and pexpect to base image, for use in consutil (#1935) Signed-off-by: Cayla Wanderman-Milne --- build_debian.sh | 3 ++- files/build_templates/sonic_debian_extension.j2 | 4 ++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/build_debian.sh b/build_debian.sh index fc8a2cb59b2d..ebe32ca536d1 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -227,7 +227,8 @@ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y in hping3 \ python-scapy \ tcptraceroute \ - mtr-tiny + mtr-tiny \ + picocom sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y download \ grub-pc-bin diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index 62637446dda2..b43e616e1756 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -98,6 +98,10 @@ sudo rm -rf $FILESYSTEM_ROOT/$PLATFORM_COMMON_PY2_WHEEL_NAME sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/python-click*_all.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f +# Install python pexpect used by sonic-utilities consutil +# using pip install instead to get a more recent version than is available through debian +sudo https_proxy=$https_proxy LANG=C chroot $FILESYSTEM_ROOT pip install pexpect + # Install SONiC Utilities (and its dependencies via 'apt-get -y install -f') sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/python-sonic-utilities_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f From 7d2766077a42275726bf725a42c123a1c1698e1c Mon Sep 17 00:00:00 2001 From: Shuotian Cheng Date: Wed, 15 Aug 2018 21:45:44 -0700 Subject: [PATCH 149/180] [common]: Update sonic-swss-common submodule (#1934) Signed-off-by: Shu0T1an ChenG --- src/sonic-swss-common | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-swss-common b/src/sonic-swss-common index 051e08d79548..5a89b1e8be0c 160000 --- a/src/sonic-swss-common +++ b/src/sonic-swss-common @@ -1 +1 @@ -Subproject commit 051e08d79548eb362c12d8800b5d2cb7bf8a1e41 +Subproject commit 5a89b1e8be0c6960031697d134db3a5276c93b30 From c1e17c33b5b0ac6bcae9744b3ba23c82207b8873 Mon Sep 17 00:00:00 2001 From: stepanblyschak <38952541+stepanblyschak@users.noreply.github.com> Date: Thu, 16 Aug 2018 07:46:34 +0300 Subject: [PATCH 150/180] [mellanox]: Fix qos.json.j2: apply qos config for active ports (#1932) Signed-off-by: Stepan Blyschak --- .../LS-SN2700/qos.json.j2 | 45 ++++++++++++++----- .../ACS-MSN2100/qos.json.j2 | 44 +++++++++++++----- .../ACS-MSN2410/qos.json.j2 | 44 +++++++++++++----- .../ACS-MSN2700/qos.json.j2 | 45 ++++++++++++++----- .../Mellanox-SN2700-D48C8/qos.json.j2 | 45 ++++++++++++++----- 5 files changed, 170 insertions(+), 53 deletions(-) diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/qos.json.j2 b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/qos.json.j2 index 3e01af3f2c64..b1759cb42118 100644 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/qos.json.j2 +++ b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/qos.json.j2 @@ -1,3 +1,30 @@ +{%- set PORT_ALL = [] %} + +{%- if PORT is not defined %} + {%- for port_idx in range(0,64) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} + {%- endfor %} +{%- else %} + {%- for port in PORT %} + {%- if PORT_ALL.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set PORT_ACTIVE = [] %} +{%- if DEVICE_NEIGHBOR is not defined %} + {%- set PORT_ACTIVE = PORT_ALL %} +{%- else %} + {%- for port in DEVICE_NEIGHBOR.keys() %} + {%- if PORT_ACTIVE.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set port_names_list_active = [] %} +{%- for port in PORT_ACTIVE %} + {%- if port_names_list_active.append(port) %}{%- endif %} +{%- endfor %} +{%- set port_names_active = port_names_list_active | join(',') %} + { "TC_TO_PRIORITY_GROUP_MAP": { "AZURE": { @@ -114,7 +141,7 @@ } }, "PORT_QOS_MAP": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124": { + "{{ port_names_active }}": { "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", @@ -148,19 +175,15 @@ } }, "QUEUE": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0": { + "{{ port_names_active }}|3-4" : { + "scheduler" : "[SCHEDULER|scheduler.0]", + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + }, + "{{ port_names_active }}|0" : { "scheduler" : "[SCHEDULER|scheduler.1]" }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|1": { + "{{ port_names_active }}|1" : { "scheduler" : "[SCHEDULER|scheduler.2]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0-1": { - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|3-4": { - "scheduler" : "[SCHEDULER|scheduler.0]", - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" } } } - diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2 b/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2 index 74045469dbfd..b1759cb42118 100644 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2 +++ b/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2 @@ -1,3 +1,30 @@ +{%- set PORT_ALL = [] %} + +{%- if PORT is not defined %} + {%- for port_idx in range(0,64) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} + {%- endfor %} +{%- else %} + {%- for port in PORT %} + {%- if PORT_ALL.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set PORT_ACTIVE = [] %} +{%- if DEVICE_NEIGHBOR is not defined %} + {%- set PORT_ACTIVE = PORT_ALL %} +{%- else %} + {%- for port in DEVICE_NEIGHBOR.keys() %} + {%- if PORT_ACTIVE.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set port_names_list_active = [] %} +{%- for port in PORT_ACTIVE %} + {%- if port_names_list_active.append(port) %}{%- endif %} +{%- endfor %} +{%- set port_names_active = port_names_list_active | join(',') %} + { "TC_TO_PRIORITY_GROUP_MAP": { "AZURE": { @@ -114,7 +141,7 @@ } }, "PORT_QOS_MAP": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60": { + "{{ port_names_active }}": { "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", @@ -148,18 +175,15 @@ } }, "QUEUE": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60|0": { + "{{ port_names_active }}|3-4" : { + "scheduler" : "[SCHEDULER|scheduler.0]", + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + }, + "{{ port_names_active }}|0" : { "scheduler" : "[SCHEDULER|scheduler.1]" }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60|1": { + "{{ port_names_active }}|1" : { "scheduler" : "[SCHEDULER|scheduler.2]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60|0-1": { - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60|3-4": { - "scheduler" : "[SCHEDULER|scheduler.0]", - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" } } } diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2 b/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2 index 95652cf96f4e..b1759cb42118 100644 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2 +++ b/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2 @@ -1,3 +1,30 @@ +{%- set PORT_ALL = [] %} + +{%- if PORT is not defined %} + {%- for port_idx in range(0,64) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} + {%- endfor %} +{%- else %} + {%- for port in PORT %} + {%- if PORT_ALL.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set PORT_ACTIVE = [] %} +{%- if DEVICE_NEIGHBOR is not defined %} + {%- set PORT_ACTIVE = PORT_ALL %} +{%- else %} + {%- for port in DEVICE_NEIGHBOR.keys() %} + {%- if PORT_ACTIVE.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set port_names_list_active = [] %} +{%- for port in PORT_ACTIVE %} + {%- if port_names_list_active.append(port) %}{%- endif %} +{%- endfor %} +{%- set port_names_active = port_names_list_active | join(',') %} + { "TC_TO_PRIORITY_GROUP_MAP": { "AZURE": { @@ -114,7 +141,7 @@ } }, "PORT_QOS_MAP": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124,Ethernet128,Ethernet132,Ethernet136,Ethernet140,Ethernet144,Ethernet148,Ethernet152,Ethernet156,Ethernet160,Ethernet164,Ethernet168,Ethernet172,Ethernet176,Ethernet180,Ethernet184,Ethernet188,Ethernet192,Ethernet196,Ethernet200,Ethernet204,Ethernet208,Ethernet212,Ethernet216,Ethernet220": { + "{{ port_names_active }}": { "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", @@ -148,18 +175,15 @@ } }, "QUEUE": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124,Ethernet128,Ethernet132,Ethernet136,Ethernet140,Ethernet144,Ethernet148,Ethernet152,Ethernet156,Ethernet160,Ethernet164,Ethernet168,Ethernet172,Ethernet176,Ethernet180,Ethernet184,Ethernet188,Ethernet192,Ethernet196,Ethernet200,Ethernet204,Ethernet208,Ethernet212,Ethernet216,Ethernet220|0": { + "{{ port_names_active }}|3-4" : { + "scheduler" : "[SCHEDULER|scheduler.0]", + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + }, + "{{ port_names_active }}|0" : { "scheduler" : "[SCHEDULER|scheduler.1]" }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124,Ethernet128,Ethernet132,Ethernet136,Ethernet140,Ethernet144,Ethernet148,Ethernet152,Ethernet156,Ethernet160,Ethernet164,Ethernet168,Ethernet172,Ethernet176,Ethernet180,Ethernet184,Ethernet188,Ethernet192,Ethernet196,Ethernet200,Ethernet204,Ethernet208,Ethernet212,Ethernet216,Ethernet220|1": { + "{{ port_names_active }}|1" : { "scheduler" : "[SCHEDULER|scheduler.2]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124,Ethernet128,Ethernet132,Ethernet136,Ethernet140,Ethernet144,Ethernet148,Ethernet152,Ethernet156,Ethernet160,Ethernet164,Ethernet168,Ethernet172,Ethernet176,Ethernet180,Ethernet184,Ethernet188,Ethernet192,Ethernet196,Ethernet200,Ethernet204,Ethernet208,Ethernet212,Ethernet216,Ethernet220|0-1": { - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124,Ethernet128,Ethernet132,Ethernet136,Ethernet140,Ethernet144,Ethernet148,Ethernet152,Ethernet156,Ethernet160,Ethernet164,Ethernet168,Ethernet172,Ethernet176,Ethernet180,Ethernet184,Ethernet188,Ethernet192,Ethernet196,Ethernet200,Ethernet204,Ethernet208,Ethernet212,Ethernet216,Ethernet220|3-4": { - "scheduler" : "[SCHEDULER|scheduler.0]", - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" } } } diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 index 3e01af3f2c64..b1759cb42118 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 @@ -1,3 +1,30 @@ +{%- set PORT_ALL = [] %} + +{%- if PORT is not defined %} + {%- for port_idx in range(0,64) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} + {%- endfor %} +{%- else %} + {%- for port in PORT %} + {%- if PORT_ALL.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set PORT_ACTIVE = [] %} +{%- if DEVICE_NEIGHBOR is not defined %} + {%- set PORT_ACTIVE = PORT_ALL %} +{%- else %} + {%- for port in DEVICE_NEIGHBOR.keys() %} + {%- if PORT_ACTIVE.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set port_names_list_active = [] %} +{%- for port in PORT_ACTIVE %} + {%- if port_names_list_active.append(port) %}{%- endif %} +{%- endfor %} +{%- set port_names_active = port_names_list_active | join(',') %} + { "TC_TO_PRIORITY_GROUP_MAP": { "AZURE": { @@ -114,7 +141,7 @@ } }, "PORT_QOS_MAP": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124": { + "{{ port_names_active }}": { "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", @@ -148,19 +175,15 @@ } }, "QUEUE": { - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0": { + "{{ port_names_active }}|3-4" : { + "scheduler" : "[SCHEDULER|scheduler.0]", + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + }, + "{{ port_names_active }}|0" : { "scheduler" : "[SCHEDULER|scheduler.1]" }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|1": { + "{{ port_names_active }}|1" : { "scheduler" : "[SCHEDULER|scheduler.2]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0-1": { - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|3-4": { - "scheduler" : "[SCHEDULER|scheduler.0]", - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" } } } - diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2 index d35f614de635..b1759cb42118 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2 +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2 @@ -1,3 +1,30 @@ +{%- set PORT_ALL = [] %} + +{%- if PORT is not defined %} + {%- for port_idx in range(0,64) %} + {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} + {%- endfor %} +{%- else %} + {%- for port in PORT %} + {%- if PORT_ALL.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set PORT_ACTIVE = [] %} +{%- if DEVICE_NEIGHBOR is not defined %} + {%- set PORT_ACTIVE = PORT_ALL %} +{%- else %} + {%- for port in DEVICE_NEIGHBOR.keys() %} + {%- if PORT_ACTIVE.append(port) %}{%- endif %} + {%- endfor %} +{%- endif %} + +{%- set port_names_list_active = [] %} +{%- for port in PORT_ACTIVE %} + {%- if port_names_list_active.append(port) %}{%- endif %} +{%- endfor %} +{%- set port_names_active = port_names_list_active | join(',') %} + { "TC_TO_PRIORITY_GROUP_MAP": { "AZURE": { @@ -114,7 +141,7 @@ } }, "PORT_QOS_MAP": { - "Ethernet8,Ethernet2,Ethernet0,Ethernet6,Ethernet4,Ethernet108,Ethernet100,Ethernet104,Ethernet106,Ethernet58,Ethernet126,Ethernet96,Ethernet124,Ethernet122,Ethernet92,Ethernet120,Ethernet50,Ethernet52,Ethernet54,Ethernet56,Ethernet76,Ethernet74,Ethernet18,Ethernet70,Ethernet32,Ethernet72,Ethernet16,Ethernet36,Ethernet78,Ethernet60,Ethernet28,Ethernet62,Ethernet14,Ethernet88,Ethernet118,Ethernet24,Ethernet116,Ethernet82,Ethernet114,Ethernet80,Ethernet112,Ethernet86,Ethernet110,Ethernet84,Ethernet48,Ethernet10,Ethernet44,Ethernet42,Ethernet40,Ethernet64,Ethernet66,Ethernet12,Ethernet46,Ethernet20,Ethernet22,Ethernet68": { + "{{ port_names_active }}": { "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", @@ -148,19 +175,15 @@ } }, "QUEUE": { - "Ethernet8,Ethernet2,Ethernet0,Ethernet6,Ethernet4,Ethernet108,Ethernet100,Ethernet104,Ethernet106,Ethernet58,Ethernet126,Ethernet96,Ethernet124,Ethernet122,Ethernet92,Ethernet120,Ethernet50,Ethernet52,Ethernet54,Ethernet56,Ethernet76,Ethernet74,Ethernet18,Ethernet70,Ethernet32,Ethernet72,Ethernet16,Ethernet36,Ethernet78,Ethernet60,Ethernet28,Ethernet62,Ethernet14,Ethernet88,Ethernet118,Ethernet24,Ethernet116,Ethernet82,Ethernet114,Ethernet80,Ethernet112,Ethernet86,Ethernet110,Ethernet84,Ethernet48,Ethernet10,Ethernet44,Ethernet42,Ethernet40,Ethernet64,Ethernet66,Ethernet12,Ethernet46,Ethernet20,Ethernet22,Ethernet68|0": { + "{{ port_names_active }}|3-4" : { + "scheduler" : "[SCHEDULER|scheduler.0]", + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + }, + "{{ port_names_active }}|0" : { "scheduler" : "[SCHEDULER|scheduler.1]" }, - "Ethernet8,Ethernet2,Ethernet0,Ethernet6,Ethernet4,Ethernet108,Ethernet100,Ethernet104,Ethernet106,Ethernet58,Ethernet126,Ethernet96,Ethernet124,Ethernet122,Ethernet92,Ethernet120,Ethernet50,Ethernet52,Ethernet54,Ethernet56,Ethernet76,Ethernet74,Ethernet18,Ethernet70,Ethernet32,Ethernet72,Ethernet16,Ethernet36,Ethernet78,Ethernet60,Ethernet28,Ethernet62,Ethernet14,Ethernet88,Ethernet118,Ethernet24,Ethernet116,Ethernet82,Ethernet114,Ethernet80,Ethernet112,Ethernet86,Ethernet110,Ethernet84,Ethernet48,Ethernet10,Ethernet44,Ethernet42,Ethernet40,Ethernet64,Ethernet66,Ethernet12,Ethernet46,Ethernet20,Ethernet22,Ethernet68|1": { + "{{ port_names_active }}|1" : { "scheduler" : "[SCHEDULER|scheduler.2]" - }, - "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0-1": { - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSY]" - }, - "Ethernet8,Ethernet2,Ethernet0,Ethernet6,Ethernet4,Ethernet108,Ethernet100,Ethernet104,Ethernet106,Ethernet58,Ethernet126,Ethernet96,Ethernet124,Ethernet122,Ethernet92,Ethernet120,Ethernet50,Ethernet52,Ethernet54,Ethernet56,Ethernet76,Ethernet74,Ethernet18,Ethernet70,Ethernet32,Ethernet72,Ethernet16,Ethernet36,Ethernet78,Ethernet60,Ethernet28,Ethernet62,Ethernet14,Ethernet88,Ethernet118,Ethernet24,Ethernet116,Ethernet82,Ethernet114,Ethernet80,Ethernet112,Ethernet86,Ethernet110,Ethernet84,Ethernet48,Ethernet10,Ethernet44,Ethernet42,Ethernet40,Ethernet64,Ethernet66,Ethernet12,Ethernet46,Ethernet20,Ethernet22,Ethernet68|3-4": { - "scheduler" : "[SCHEDULER|scheduler.0]", - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" } } } - From 38f3eba695b0bd27fd3f10a8e6729118780caad4 Mon Sep 17 00:00:00 2001 From: lguohan Date: Thu, 16 Aug 2018 08:56:56 -0700 Subject: [PATCH 151/180] [kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u1) (#1922) * [kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u1) Signed-off-by: Guohan Lu * [mellanox]: Update SDK pointer for 4.9.0-7 kernel (#44) Signed-off-by: Volodymyr Samotiy * Update arista drivers for 4.9.0-7 linux kernel (#43) --- build_debian.sh | 2 +- files/build_templates/swss.service.j2 | 8 ++++---- installer/x86_64/install.sh | 4 ++-- platform/barefoot/sonic-platform-modules-arista | 2 +- platform/broadcom/sai-modules.mk | 2 +- platform/broadcom/saibcm-modules/debian/control | 4 ++-- .../debian/opennsl-modules-4.9.0-5-amd64.dirs | 1 - .../debian/opennsl-modules-4.9.0-7-amd64.dirs | 1 + ....0-5-amd64.init => opennsl-modules-4.9.0-7-amd64.init} | 2 +- ...md64.install => opennsl-modules-4.9.0-7-amd64.install} | 8 ++++---- platform/broadcom/saibcm-modules/debian/rules | 6 +++--- ...md64.service => opennsl-modules-4.9.0-7-amd64.service} | 4 ++-- platform/broadcom/sonic-platform-modules-arista | 2 +- .../broadcom/sonic-platform-modules-cel/debian/control | 4 ++-- .../broadcom/sonic-platform-modules-dell/debian/control | 6 +++--- .../broadcom/sonic-platform-modules-delta/debian/control | 8 ++++---- .../debian/platform-modules-et-6248brb.init | 2 +- .../et-6248brb/scripts/led_status.sh | 2 +- .../broadcom/sonic-platform-modules-s6000/debian/control | 2 +- platform/mellanox/sdk.mk | 2 +- rules/linux-kernel.mk | 6 +++--- src/sonic-linux-kernel | 2 +- 22 files changed, 40 insertions(+), 40 deletions(-) delete mode 100644 platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.dirs create mode 100644 platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.dirs rename platform/broadcom/saibcm-modules/debian/{opennsl-modules-4.9.0-5-amd64.init => opennsl-modules-4.9.0-7-amd64.init} (92%) rename platform/broadcom/saibcm-modules/debian/{opennsl-modules-4.9.0-5-amd64.install => opennsl-modules-4.9.0-7-amd64.install} (56%) rename platform/broadcom/saibcm-modules/systemd/{opennsl-modules-4.9.0-5-amd64.service => opennsl-modules-4.9.0-7-amd64.service} (59%) diff --git a/build_debian.sh b/build_debian.sh index ebe32ca536d1..28b9833612b1 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -30,7 +30,7 @@ set -x -e ## docker engine version (with platform) DOCKER_VERSION=1.11.1-0~stretch_amd64 -LINUX_KERNEL_VERSION=4.9.0-5 +LINUX_KERNEL_VERSION=4.9.0-7 ## Working directory to prepare the file system FILESYSTEM_ROOT=./fsroot diff --git a/files/build_templates/swss.service.j2 b/files/build_templates/swss.service.j2 index 8a138d46a7ca..08e3f50e2697 100644 --- a/files/build_templates/swss.service.j2 +++ b/files/build_templates/swss.service.j2 @@ -2,16 +2,16 @@ Description=switch state service Requires=database.service updategraph.service {% if sonic_asic_platform == 'broadcom' %} -Requires=opennsl-modules-4.9.0-5-amd64.service +Requires=opennsl-modules-4.9.0-7-amd64.service {% elif sonic_asic_platform == 'nephos' %} -Requires=nps-modules-4.9.0-5-amd64.service +Requires=nps-modules-4.9.0-7-amd64.service {% endif %} After=database.service updategraph.service After=interfaces-config.service {% if sonic_asic_platform == 'broadcom' %} -After=opennsl-modules-4.9.0-5-amd64.service +After=opennsl-modules-4.9.0-7-amd64.service {% elif sonic_asic_platform == 'nephos' %} -After=nps-modules-4.9.0-5-amd64.service +After=nps-modules-4.9.0-7-amd64.service {% endif %} [Service] diff --git a/installer/x86_64/install.sh b/installer/x86_64/install.sh index 327c0c47f111..874dc8d13da0 100755 --- a/installer/x86_64/install.sh +++ b/installer/x86_64/install.sh @@ -570,12 +570,12 @@ menuentry '$demo_grub_entry' { if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi insmod part_msdos insmod ext2 - linux /$image_dir/boot/vmlinuz-4.9.0-5-amd64 root=$grub_cfg_root rw $GRUB_CMDLINE_LINUX \ + linux /$image_dir/boot/vmlinuz-4.9.0-7-amd64 root=$grub_cfg_root rw $GRUB_CMDLINE_LINUX \ net.ifnames=0 biosdevname=0 \ loop=$image_dir/$FILESYSTEM_SQUASHFS loopfstype=squashfs \ apparmor=1 security=apparmor varlog_size=$VAR_LOG_SIZE usbcore.autosuspend=-1 $ONIE_PLATFORM_EXTRA_CMDLINE_LINUX echo 'Loading $demo_volume_label $demo_type initial ramdisk ...' - initrd /$image_dir/boot/initrd.img-4.9.0-5-amd64 + initrd /$image_dir/boot/initrd.img-4.9.0-7-amd64 } EOF diff --git a/platform/barefoot/sonic-platform-modules-arista b/platform/barefoot/sonic-platform-modules-arista index a4d1d8d2737c..4904fbd01e6a 160000 --- a/platform/barefoot/sonic-platform-modules-arista +++ b/platform/barefoot/sonic-platform-modules-arista @@ -1 +1 @@ -Subproject commit a4d1d8d2737cf49bd6cc802dbc6c8c0ff682fa87 +Subproject commit 4904fbd01e6a4547c404d3694139b36e716cfe31 diff --git a/platform/broadcom/sai-modules.mk b/platform/broadcom/sai-modules.mk index 31cd5996ef1c..f7c449300f8a 100644 --- a/platform/broadcom/sai-modules.mk +++ b/platform/broadcom/sai-modules.mk @@ -1,6 +1,6 @@ # Broadcom SAI modules -KVERSION = 4.9.0-5-amd64 +KVERSION = 4.9.0-7-amd64 BRCM_OPENNSL_KERNEL_VERSION = 3.4.1.11-1 BRCM_OPENNSL_KERNEL = opennsl-modules-$(KVERSION)_$(BRCM_OPENNSL_KERNEL_VERSION)_amd64.deb diff --git a/platform/broadcom/saibcm-modules/debian/control b/platform/broadcom/saibcm-modules/debian/control index e84d6de9fd52..b3884f80f2e0 100644 --- a/platform/broadcom/saibcm-modules/debian/control +++ b/platform/broadcom/saibcm-modules/debian/control @@ -7,8 +7,8 @@ Standards-Version: 3.9.3 #Vcs-Git: git://git.debian.org/collab-maint/bcmsdk.git #Vcs-Browser: http://git.debian.org/?p=collab-maint/bcmsdk.git;a=summary -Package: opennsl-modules-4.9.0-5-amd64 +Package: opennsl-modules-4.9.0-7-amd64 Architecture: amd64 Section: main -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for broadcom SAI diff --git a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.dirs b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.dirs deleted file mode 100644 index 30ebf9851ecb..000000000000 --- a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.dirs +++ /dev/null @@ -1 +0,0 @@ -lib/modules/4.9.0-5-amd64/extra diff --git a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.dirs b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.dirs new file mode 100644 index 000000000000..e614841819bc --- /dev/null +++ b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.dirs @@ -0,0 +1 @@ +lib/modules/4.9.0-7-amd64/extra diff --git a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.init b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.init similarity index 92% rename from platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.init rename to platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.init index 07a6f834757b..7f9f2e24db19 100755 --- a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.init +++ b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.init @@ -38,7 +38,7 @@ force-reload|restart) ;; *) - echo "Usage: /etc/init.d/opennsl-modules-4.9.0-5-amd64.init {start|stop}" + echo "Usage: /etc/init.d/opennsl-modules-4.9.0-7-amd64.init {start|stop}" exit 1 ;; esac diff --git a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.install b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.install similarity index 56% rename from platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.install rename to platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.install index d79178a4a549..fe6b748c29b8 100644 --- a/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-5-amd64.install +++ b/platform/broadcom/saibcm-modules/debian/opennsl-modules-4.9.0-7-amd64.install @@ -1,4 +1,4 @@ -systems/linux/user/x86-smp_generic_64-2_6/linux-bcm-knet.ko lib/modules/4.9.0-5-amd64/extra -systems/linux/user/x86-smp_generic_64-2_6/linux-kernel-bde.ko lib/modules/4.9.0-5-amd64/extra -systems/linux/user/x86-smp_generic_64-2_6/linux-user-bde.ko lib/modules/4.9.0-5-amd64/extra -systemd/opennsl-modules-4.9.0-5-amd64.service lib/systemd/system +systems/linux/user/x86-smp_generic_64-2_6/linux-bcm-knet.ko lib/modules/4.9.0-7-amd64/extra +systems/linux/user/x86-smp_generic_64-2_6/linux-kernel-bde.ko lib/modules/4.9.0-7-amd64/extra +systems/linux/user/x86-smp_generic_64-2_6/linux-user-bde.ko lib/modules/4.9.0-7-amd64/extra +systemd/opennsl-modules-4.9.0-7-amd64.service lib/systemd/system diff --git a/platform/broadcom/saibcm-modules/debian/rules b/platform/broadcom/saibcm-modules/debian/rules index 231c52aa8ccd..7560bfad91fa 100755 --- a/platform/broadcom/saibcm-modules/debian/rules +++ b/platform/broadcom/saibcm-modules/debian/rules @@ -60,7 +60,7 @@ kdist_config: prep-deb-files kdist_clean: clean dh_testdir dh_clean - SDK=$(realpath .) LINUX_UAPI_SPLIT=1 DEBIAN_LINUX_HEADER=1 KERNDIR=/usr/src/linux-headers-4.9.0-5-amd64 KERNEL_SRC=/usr/src/linux-headers-4.9.0-5-amd64 $(MAKE) -C systems/linux/user/x86-smp_generic_64-2_6 clean + SDK=$(realpath .) LINUX_UAPI_SPLIT=1 DEBIAN_LINUX_HEADER=1 KERNDIR=/usr/src/linux-headers-4.9.0-7-amd64 KERNEL_SRC=/usr/src/linux-headers-4.9.0-7-amd64 $(MAKE) -C systems/linux/user/x86-smp_generic_64-2_6 clean # rm -f driver/*.o driver/*.ko # ### end KERNEL SETUP @@ -78,7 +78,7 @@ build-arch-stamp: dh_testdir # Add here command to compile/build the package. - SDK=$(realpath .) LINUX_UAPI_SPLIT=1 DEBIAN_LINUX_HEADER=1 KERNDIR=/usr/src/linux-headers-4.9.0-5-amd64 KERNEL_SRC=/usr/src/linux-headers-4.9.0-5-amd64 $(MAKE) -C systems/linux/user/x86-smp_generic_64-2_6 + SDK=$(realpath .) LINUX_UAPI_SPLIT=1 DEBIAN_LINUX_HEADER=1 KERNDIR=/usr/src/linux-headers-4.9.0-7-amd64 KERNEL_SRC=/usr/src/linux-headers-4.9.0-7-amd64 $(MAKE) -C systems/linux/user/x86-smp_generic_64-2_6 touch $@ @@ -103,7 +103,7 @@ clean: rm -f build-arch-stamp build-indep-stamp configure-stamp # Add here commands to clean up after the build process. - SDK=$(realpath .) LINUX_UAPI_SPLIT=1 DEBIAN_LINUX_HEADER=1 KERNDIR=/usr/src/linux-headers-4.9.0-5-amd64 KERNEL_SRC=/usr/src/linux-headers-4.9.0-5-amd64 $(MAKE) -C systems/linux/user/x86-smp_generic_64-2_6 clean + SDK=$(realpath .) LINUX_UAPI_SPLIT=1 DEBIAN_LINUX_HEADER=1 KERNDIR=/usr/src/linux-headers-4.9.0-7-amd64 KERNEL_SRC=/usr/src/linux-headers-4.9.0-7-amd64 $(MAKE) -C systems/linux/user/x86-smp_generic_64-2_6 clean dh_clean diff --git a/platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-5-amd64.service b/platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-7-amd64.service similarity index 59% rename from platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-5-amd64.service rename to platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-7-amd64.service index 4da3f9761991..12c5ae40db97 100644 --- a/platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-5-amd64.service +++ b/platform/broadcom/saibcm-modules/systemd/opennsl-modules-4.9.0-7-amd64.service @@ -5,8 +5,8 @@ Before=syncd.service [Service] Type=oneshot -ExecStart=-/etc/init.d/opennsl-modules-4.9.0-5-amd64 start -ExecStop=-/etc/init.d/opennsl-modules-4.9.0-5-amd64 stop +ExecStart=-/etc/init.d/opennsl-modules-4.9.0-7-amd64 start +ExecStop=-/etc/init.d/opennsl-modules-4.9.0-7-amd64 stop RemainAfterExit=yes [Install] diff --git a/platform/broadcom/sonic-platform-modules-arista b/platform/broadcom/sonic-platform-modules-arista index a4d1d8d2737c..4904fbd01e6a 160000 --- a/platform/broadcom/sonic-platform-modules-arista +++ b/platform/broadcom/sonic-platform-modules-arista @@ -1 +1 @@ -Subproject commit a4d1d8d2737cf49bd6cc802dbc6c8c0ff682fa87 +Subproject commit 4904fbd01e6a4547c404d3694139b36e716cfe31 diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/control b/platform/broadcom/sonic-platform-modules-cel/debian/control index a26bdea11395..9f561288d399 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/control +++ b/platform/broadcom/sonic-platform-modules-cel/debian/control @@ -7,11 +7,11 @@ Standards-Version: 3.9.3 Package: platform-modules-dx010 Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-haliburton Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp diff --git a/platform/broadcom/sonic-platform-modules-dell/debian/control b/platform/broadcom/sonic-platform-modules-dell/debian/control index 557b5b884f93..15a88931c1c3 100644 --- a/platform/broadcom/sonic-platform-modules-dell/debian/control +++ b/platform/broadcom/sonic-platform-modules-dell/debian/control @@ -7,16 +7,16 @@ Standards-Version: 3.9.3 Package: platform-modules-z9264f Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-z9100 Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-s6100 Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/control b/platform/broadcom/sonic-platform-modules-delta/debian/control index 9b0119dbe042..0bcceccf6b18 100644 --- a/platform/broadcom/sonic-platform-modules-delta/debian/control +++ b/platform/broadcom/sonic-platform-modules-delta/debian/control @@ -7,21 +7,21 @@ Standards-Version: 3.9.3 Package: platform-modules-ag9032v1 Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-ag9064 Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-ag5648 Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp Package: platform-modules-et-6248brb Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp diff --git a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.init b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.init index e314a528a6e9..726e0ba6923b 100755 --- a/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.init +++ b/platform/broadcom/sonic-platform-modules-delta/debian/platform-modules-et-6248brb.init @@ -25,7 +25,7 @@ start) modprobe dni_gpio modprobe delta_et-6248brb_platform - if [ `uname -a | awk '{print $3}'` = "4.9.0-5-amd64" ]; then + if [ `uname -a | awk '{print $3}'` = "4.9.0-7-amd64" ]; then echo "453" > "/sys/class/gpio/export" echo "454" > "/sys/class/gpio/export" echo "455" > "/sys/class/gpio/export" diff --git a/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/led_status.sh b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/led_status.sh index 2ba61bbfecb3..74276a6d31f3 100644 --- a/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/led_status.sh +++ b/platform/broadcom/sonic-platform-modules-delta/et-6248brb/scripts/led_status.sh @@ -7,7 +7,7 @@ FAN2_RPM="/sys/bus/i2c/devices/0-002e/fan2_input" FAN_TRAY1_LED="/sys/devices/platform/delta-et6248brb-gpio.0/FAN/fan1_led_ag" FAN_TRAY2_LED="/sys/devices/platform/delta-et6248brb-gpio.0/FAN/fan2_led_ag" -if [ `uname -a | awk '{print $3}'` = "4.9.0-5-amd64" ]; then +if [ `uname -a | awk '{print $3}'` = "4.9.0-7-amd64" ]; then SYS_LED_G="/sys/class/gpio/gpio453/value" SYS_LED_R="/sys/class/gpio/gpio454/value" PWR_LED_G="/sys/class/gpio/gpio455/value" diff --git a/platform/broadcom/sonic-platform-modules-s6000/debian/control b/platform/broadcom/sonic-platform-modules-s6000/debian/control index fbd8529de4e8..eb91ec6718f3 100644 --- a/platform/broadcom/sonic-platform-modules-s6000/debian/control +++ b/platform/broadcom/sonic-platform-modules-s6000/debian/control @@ -7,6 +7,6 @@ Standards-Version: 3.9.3 Package: platform-modules-s6000 Architecture: amd64 -Depends: linux-image-4.9.0-5-amd64 +Depends: linux-image-4.9.0-7-amd64 Description: kernel modules for platform devices such as fan, led, sfp diff --git a/platform/mellanox/sdk.mk b/platform/mellanox/sdk.mk index d3bb61517339..a667005bc6c0 100644 --- a/platform/mellanox/sdk.mk +++ b/platform/mellanox/sdk.mk @@ -1,4 +1,4 @@ -MLNX_SDK_BASE_URL = https://github.com/Mellanox/SAI-Implementation/raw/87823de172a593e070ff7e9f3e17d442c7cf1eac/sdk +MLNX_SDK_BASE_URL = https://github.com/Mellanox/SAI-Implementation/raw/16e0822d7077d8558e6ff92b3c6650df17a88219/sdk MLNX_SDK_VERSION = 4.2.8103 MLNX_SDK_RDEBS += $(APPLIBS) $(IPROUTE2_MLNX) $(SX_ACL_RM) $(SX_COMPLIB) \ $(SX_EXAMPLES) $(SX_GEN_UTILS) $(SX_SCEW) $(SX_SDN_HAL) \ diff --git a/rules/linux-kernel.mk b/rules/linux-kernel.mk index 333301644d50..7c9e7b2c07aa 100644 --- a/rules/linux-kernel.mk +++ b/rules/linux-kernel.mk @@ -1,9 +1,9 @@ # linux kernel package -KVERSION_SHORT = 4.9.0-5 +KVERSION_SHORT = 4.9.0-7 KVERSION = $(KVERSION_SHORT)-amd64 -KERNEL_VERSION = 4.9.65 -KERNEL_SUBVERSION = 3+deb9u2 +KERNEL_VERSION = 4.9.110 +KERNEL_SUBVERSION = 3+deb9u1 export KVERSION_SHORT KVERSION KERNEL_VERSION KERNEL_SUBVERSION diff --git a/src/sonic-linux-kernel b/src/sonic-linux-kernel index 28e99c0e7618..7c97ae923c9e 160000 --- a/src/sonic-linux-kernel +++ b/src/sonic-linux-kernel @@ -1 +1 @@ -Subproject commit 28e99c0e76189e8ec5c46535cbd87145668262d8 +Subproject commit 7c97ae923c9ec9b2006ed275e8780233b32b28f6 From cd9c5e737309a6790a5384e019b9adef3467128b Mon Sep 17 00:00:00 2001 From: stepanblyschak <38952541+stepanblyschak@users.noreply.github.com> Date: Thu, 16 Aug 2018 20:37:25 +0300 Subject: [PATCH 152/180] Allow similar devices configs sharing (#1933) * Allow similar devices configs sharing Signed-off-by: Stepan Blyschak * Remove unnecessary cp flags Signed-off-by: Stepan Blyschak * Remove hw-managment symlink for LS-SN2700 & resolve symlinks during cp Signed-off-by: Stepan Blyschak --- .../x86_64-mlnx_lssn2700-r0/LS-SN2700 | 1 + .../LS-SN2700/buffers.json.j2 | 1 - .../LS-SN2700/buffers_defaults_t0.j2 | 1 - .../LS-SN2700/buffers_defaults_t1.j2 | 1 - .../LS-SN2700/pg_profile_lookup.ini | 17 -- .../LS-SN2700/port_config.ini | 33 --- .../LS-SN2700/qos.json.j2 | 189 -------------- .../LS-SN2700/sai.profile | 1 - .../LS-SN2700/sai_2700.xml | 243 ------------------ .../x86_64-mlnx_lssn2700-r0/hw-management | 1 - .../x86_64-mlnx_lssn2700-r0/installer.conf | 2 +- .../x86_64-mlnx_lssn2700-r0/plugins/eeprom.py | 32 --- .../plugins/psuutil.py | 74 ------ .../plugins/sfplpmget.py | 43 ---- .../plugins/sfplpmset.py | 107 -------- .../plugins/sfpreset.py | 45 ---- .../plugins/sfputil.py | 190 -------------- .../x86_64-mlnx_lssn2700-r0/sensors.conf | 22 +- .../ACS-MSN2100/pg_profile_lookup.ini | 18 +- .../x86_64-mlnx_msn2100-r0/installer.conf | 2 +- .../x86_64-mlnx_msn2100-r0/sensors.conf | 22 +- .../ACS-MSN2410/pg_profile_lookup.ini | 18 +- .../x86_64-mlnx_msn2410-r0/installer.conf | 2 +- .../x86_64-mlnx_msn2410-r0/sensors.conf | 22 +- .../Mellanox-SN2700-D48C8/buffers.json.j2 | 3 +- .../buffers_defaults_t0.j2 | 91 +------ .../buffers_defaults_t1.j2 | 91 +------ .../pg_profile_lookup.ini | 18 +- .../ACS-MSN2740/pg_profile_lookup.ini | 18 +- .../x86_64-mlnx_msn2740-r0/installer.conf | 2 +- .../x86_64-mlnx_msn2740-r0/sensors.conf | 22 +- src/sonic-device-data/Makefile | 2 +- 32 files changed, 17 insertions(+), 1317 deletions(-) create mode 120000 device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700 delete mode 120000 device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers.json.j2 delete mode 120000 device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers_defaults_t0.j2 delete mode 120000 device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers_defaults_t1.j2 delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/pg_profile_lookup.ini delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/port_config.ini delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/qos.json.j2 delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/sai.profile delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/sai_2700.xml delete mode 120000 device/mellanox/x86_64-mlnx_lssn2700-r0/hw-management mode change 100644 => 120000 device/mellanox/x86_64-mlnx_lssn2700-r0/installer.conf delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/eeprom.py delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/psuutil.py delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfplpmget.py delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfplpmset.py delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfpreset.py delete mode 100644 device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py mode change 100644 => 120000 device/mellanox/x86_64-mlnx_lssn2700-r0/sensors.conf mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/pg_profile_lookup.ini mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2100-r0/installer.conf mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2100-r0/sensors.conf mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/pg_profile_lookup.ini mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2410-r0/installer.conf mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2410-r0/sensors.conf mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers.json.j2 mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t0.j2 mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t1.j2 mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/pg_profile_lookup.ini mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2740-r0/ACS-MSN2740/pg_profile_lookup.ini mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2740-r0/installer.conf mode change 100644 => 120000 device/mellanox/x86_64-mlnx_msn2740-r0/sensors.conf diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700 b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700 new file mode 120000 index 000000000000..dfed1bb2cfb5 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700 @@ -0,0 +1 @@ +../x86_64-mlnx_msn2700-r0/ACS-MSN2700/ \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers.json.j2 b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers.json.j2 deleted file mode 120000 index add8bf8bb7c2..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers.json.j2 +++ /dev/null @@ -1 +0,0 @@ -../../x86_64-mlnx_msn2700-r0/ACS-MSN2700/buffers.json.j2 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers_defaults_t0.j2 b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers_defaults_t0.j2 deleted file mode 120000 index 7bcae62336f6..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers_defaults_t0.j2 +++ /dev/null @@ -1 +0,0 @@ -../../x86_64-mlnx_msn2700-r0/ACS-MSN2700/buffers_defaults_t0.j2 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers_defaults_t1.j2 b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers_defaults_t1.j2 deleted file mode 120000 index a437d613434d..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/buffers_defaults_t1.j2 +++ /dev/null @@ -1 +0,0 @@ -../../x86_64-mlnx_msn2700-r0/ACS-MSN2700/buffers_defaults_t1.j2 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/pg_profile_lookup.ini b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/pg_profile_lookup.ini deleted file mode 100644 index b66b129fe43f..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/pg_profile_lookup.ini +++ /dev/null @@ -1,17 +0,0 @@ -# PG lossless profiles. -# speed cable size xon xoff threshold - 10000 5m 34816 18432 16384 0 - 25000 5m 34816 18432 16384 0 - 40000 5m 34816 18432 16384 0 - 50000 5m 34816 18432 16384 0 - 100000 5m 36864 18432 18432 0 - 10000 40m 36864 18432 18432 0 - 25000 40m 39936 18432 21504 0 - 40000 40m 41984 18432 23552 0 - 50000 40m 41984 18432 23552 0 - 100000 40m 54272 18432 35840 0 - 10000 300m 49152 18432 30720 0 - 25000 300m 71680 18432 53248 0 - 40000 300m 94208 18432 75776 0 - 50000 300m 94208 18432 75776 0 - 100000 300m 184320 18432 165888 0 diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/port_config.ini b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/port_config.ini deleted file mode 100644 index 816bb0e94a70..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/port_config.ini +++ /dev/null @@ -1,33 +0,0 @@ -# name lanes -Ethernet0 0,1,2,3 -Ethernet4 4,5,6,7 -Ethernet8 8,9,10,11 -Ethernet12 12,13,14,15 -Ethernet16 16,17,18,19 -Ethernet20 20,21,22,23 -Ethernet24 24,25,26,27 -Ethernet28 28,29,30,31 -Ethernet32 32,33,34,35 -Ethernet36 36,37,38,39 -Ethernet40 40,41,42,43 -Ethernet44 44,45,46,47 -Ethernet48 48,49,50,51 -Ethernet52 52,53,54,55 -Ethernet56 56,57,58,59 -Ethernet60 60,61,62,63 -Ethernet64 64,65,66,67 -Ethernet68 68,69,70,71 -Ethernet72 72,73,74,75 -Ethernet76 76,77,78,79 -Ethernet80 80,81,82,83 -Ethernet84 84,85,86,87 -Ethernet88 88,89,90,91 -Ethernet92 92,93,94,95 -Ethernet96 96,97,98,99 -Ethernet100 100,101,102,103 -Ethernet104 104,105,106,107 -Ethernet108 108,109,110,111 -Ethernet112 112,113,114,115 -Ethernet116 116,117,118,119 -Ethernet120 120,121,122,123 -Ethernet124 124,125,126,127 diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/qos.json.j2 b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/qos.json.j2 deleted file mode 100644 index b1759cb42118..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/qos.json.j2 +++ /dev/null @@ -1,189 +0,0 @@ -{%- set PORT_ALL = [] %} - -{%- if PORT is not defined %} - {%- for port_idx in range(0,64) %} - {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} - {%- endfor %} -{%- else %} - {%- for port in PORT %} - {%- if PORT_ALL.append(port) %}{%- endif %} - {%- endfor %} -{%- endif %} - -{%- set PORT_ACTIVE = [] %} -{%- if DEVICE_NEIGHBOR is not defined %} - {%- set PORT_ACTIVE = PORT_ALL %} -{%- else %} - {%- for port in DEVICE_NEIGHBOR.keys() %} - {%- if PORT_ACTIVE.append(port) %}{%- endif %} - {%- endfor %} -{%- endif %} - -{%- set port_names_list_active = [] %} -{%- for port in PORT_ACTIVE %} - {%- if port_names_list_active.append(port) %}{%- endif %} -{%- endfor %} -{%- set port_names_active = port_names_list_active | join(',') %} - -{ - "TC_TO_PRIORITY_GROUP_MAP": { - "AZURE": { - "0": "0", - "1": "1", - "3": "3", - "4": "4" - } - }, - "MAP_PFC_PRIORITY_TO_QUEUE": { - "AZURE": { - "0": "0", - "1": "1", - "3": "3", - "4": "4" - } - }, - "TC_TO_QUEUE_MAP": { - "AZURE": { - "0": "0", - "1": "1", - "3": "3", - "4": "4" - } - }, - "DSCP_TO_TC_MAP": { - "AZURE": { - "0":"0", - "1":"0", - "2":"0", - "3":"3", - "4":"4", - "5":"0", - "6":"0", - "7":"0", - "8":"1", - "9":"0", - "10":"0", - "11":"0", - "12":"0", - "13":"0", - "14":"0", - "15":"0", - "16":"0", - "17":"0", - "18":"0", - "19":"0", - "20":"0", - "21":"0", - "22":"0", - "23":"0", - "24":"0", - "25":"0", - "26":"0", - "27":"0", - "28":"0", - "29":"0", - "30":"0", - "31":"0", - "32":"0", - "33":"0", - "34":"0", - "35":"0", - "36":"0", - "37":"0", - "38":"0", - "39":"0", - "40":"0", - "41":"0", - "42":"0", - "43":"0", - "44":"0", - "45":"0", - "46":"0", - "47":"0", - "48":"0", - "49":"0", - "50":"0", - "51":"0", - "52":"0", - "53":"0", - "54":"0", - "55":"0", - "56":"0", - "57":"0", - "58":"0", - "59":"0", - "60":"0", - "61":"0", - "62":"0", - "63":"0" - } - }, - "SCHEDULER": { - "scheduler.0": { - "type":"DWRR", - "weight": "25" - }, - "scheduler.1": { - "type":"DWRR", - "weight": "30" - }, - "scheduler.2": { - "type":"DWRR", - "weight": "20" - } - }, - "PFC_PRIORITY_TO_PRIORITY_GROUP_MAP": { - "AZURE": { - "0": "0", - "1": "1", - "3": "3", - "4": "4" - } - }, - "PORT_QOS_MAP": { - "{{ port_names_active }}": { - "dscp_to_tc_map" : "[DSCP_TO_TC_MAP|AZURE]", - "tc_to_queue_map" : "[TC_TO_QUEUE_MAP|AZURE]", - "tc_to_pg_map" : "[TC_TO_PRIORITY_GROUP_MAP|AZURE]", - "pfc_to_queue_map": "[MAP_PFC_PRIORITY_TO_QUEUE|AZURE]", - "pfc_to_pg_map" : "[PFC_PRIORITY_TO_PRIORITY_GROUP_MAP|AZURE]", - "pfc_enable": "3,4" - } - }, - "WRED_PROFILE": { - "AZURE_LOSSY": { - "wred_green_enable":"true", - "wred_yellow_enable":"true", - "ecn":"ecn_all", - "red_max_threshold":"516096", - "red_min_threshold":"516096", - "yellow_max_threshold":"516096", - "yellow_min_threshold":"516096", - "green_max_threshold": "184320", - "green_min_threshold": "184320" - }, - "AZURE_LOSSLESS": { - "wred_green_enable":"true", - "wred_yellow_enable":"true", - "ecn":"ecn_all", - "red_max_threshold":"516096", - "red_min_threshold":"516096", - "yellow_max_threshold":"516096", - "yellow_min_threshold":"516096", - "green_max_threshold": "184320", - "green_min_threshold": "184320" - } - }, - "QUEUE": { - "{{ port_names_active }}|3-4" : { - "scheduler" : "[SCHEDULER|scheduler.0]", - "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" - }, - "{{ port_names_active }}|0" : { - "scheduler" : "[SCHEDULER|scheduler.1]" - }, - "{{ port_names_active }}|1" : { - "scheduler" : "[SCHEDULER|scheduler.2]" - } - } -} diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/sai.profile b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/sai.profile deleted file mode 100644 index 696f3d8182f9..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/sai.profile +++ /dev/null @@ -1 +0,0 @@ -SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/sai_2700.xml diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/sai_2700.xml b/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/sai_2700.xml deleted file mode 100644 index 7831c9cf59d0..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/LS-SN2700/sai_2700.xml +++ /dev/null @@ -1,243 +0,0 @@ - - - - - - 00:02:03:04:05:00 - - - 32 - - - - - 1 - 4 - 16 - - - 3 - - - 98368 - - - 3 - 4 - 17 - 1 - 98368 - - - 5 - 4 - 18 - 3 - 98368 - - - 7 - 4 - 19 - 1 - 98368 - - - 9 - 4 - 20 - 3 - 98368 - - - 11 - 4 - 21 - 1 - 98368 - - - 13 - 4 - 22 - 3 - 98368 - - - 15 - 4 - 23 - 1 - 98368 - - - 17 - 4 - 24 - 3 - 98368 - - - 19 - 4 - 25 - 1 - 98368 - - - 21 - 4 - 26 - 3 - 98368 - - - 23 - 4 - 27 - 1 - 98368 - - - 25 - 4 - 28 - 3 - 98368 - - - 27 - 4 - 29 - 1 - 98368 - - - 29 - 4 - 30 - 3 - 98368 - - - 31 - 4 - 31 - 1 - 98368 - - - 33 - 4 - 14 - 3 - 98368 - - - 35 - 4 - 15 - 1 - 98368 - - - 37 - 4 - 12 - 3 - 98368 - - - 39 - 4 - 13 - 1 - 98368 - - - 41 - 4 - 10 - 3 - 98368 - - - 43 - 4 - 11 - 1 - 98368 - - - 45 - 4 - 8 - 3 - 98368 - - - 47 - 4 - 9 - 1 - 98368 - - - 49 - 4 - 6 - 3 - 98368 - - - 51 - 4 - 7 - 1 - 98368 - - - 53 - 4 - 4 - 3 - 98368 - - - 55 - 4 - 5 - 1 - 98368 - - - 57 - 4 - 2 - 3 - 98368 - - - 59 - 4 - 3 - 1 - 98368 - - - 61 - 4 - 0 - 3 - 98368 - - - 63 - 4 - 1 - 1 - 98368 - - - - diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/hw-management b/device/mellanox/x86_64-mlnx_lssn2700-r0/hw-management deleted file mode 120000 index eb5e941daad7..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/hw-management +++ /dev/null @@ -1 +0,0 @@ -/etc/mlnx/msn2700 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/installer.conf b/device/mellanox/x86_64-mlnx_lssn2700-r0/installer.conf deleted file mode 100644 index c9c9493a5404..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/installer.conf +++ /dev/null @@ -1 +0,0 @@ -ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="acpi_enforce_resources=lax acpi=noirq" diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/installer.conf b/device/mellanox/x86_64-mlnx_lssn2700-r0/installer.conf new file mode 120000 index 000000000000..955db12ff425 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_lssn2700-r0/installer.conf @@ -0,0 +1 @@ +../x86_64-mlnx_msn2700-r0/installer.conf \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/eeprom.py b/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/eeprom.py deleted file mode 100644 index 3650d9c8b70b..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/eeprom.py +++ /dev/null @@ -1,32 +0,0 @@ -#!/usr/bin/env python - -############################################################################# -# Mellanox -# -# Platform and model specific eeprom subclass, inherits from the base class, -# and provides the followings: -# - the eeprom format definition -# - specific encoder/decoder if there is special need -############################################################################# - -try: - import exceptions - import binascii - import time - import optparse - import warnings - import os - import sys - from sonic_eeprom import eeprom_base - from sonic_eeprom import eeprom_tlvinfo - import subprocess -except ImportError, e: - raise ImportError (str(e) + "- required module not found") - -class board(eeprom_tlvinfo.TlvInfoDecoder): - - _TLV_INFO_MAX_LEN = 256 - - def __init__(self, name, path, cpld_root, ro): - self.eeprom_path = "/bsp/eeprom/sys_eeprom" - super(board, self).__init__(self.eeprom_path, 0, '', True) diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/psuutil.py b/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/psuutil.py deleted file mode 100644 index 301569c13a94..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/psuutil.py +++ /dev/null @@ -1,74 +0,0 @@ -#!/usr/bin/env python - -############################################################################# -# Mellanox -# -# Module contains an implementation of SONiC PSU Base API and -# provides the PSUs status which are available in the platform -# -############################################################################# - -import os.path - -try: - from sonic_psu.psu_base import PsuBase -except ImportError as e: - raise ImportError (str(e) + "- required module not found") - -class PsuUtil(PsuBase): - """Platform-specific PSUutil class""" - - def __init__(self): - PsuBase.__init__(self) - - self.psu_path = "/sys/bus/i2c/devices/2-0060/" - self.psu_presence = "psu{}_status" - self.psu_oper_status = "psu{}_pg_status" - - def get_num_psus(self): - """ - Retrieves the number of PSUs available on the device - - :return: An integer, the number of PSUs available on the device - """ - return 2 - - def get_psu_status(self, index): - """ - Retrieves the oprational status of power supply unit (PSU) defined - by 1-based index - - :param index: An integer, 1-based index of the PSU of which to query status - :return: Boolean, True if PSU is operating properly, False if PSU is faulty - """ - if index is None: - return False - - status = 0 - try: - with open(self.psu_path + self.psu_oper_status.format(index), 'r') as power_status: - status = int(power_status.read()) - except IOError: - return False - - return status == 1 - - def get_psu_presence(self, index): - """ - Retrieves the presence status of power supply unit (PSU) defined - by 1-based index - - :param index: An integer, 1-based index of the PSU of which to query status - :return: Boolean, True if PSU is plugged, False if not - """ - if index is None: - return False - - status = 0 - try: - with open(self.psu_path + self.psu_presence.format(index), 'r') as presence_status: - status = int(presence_status.read()) - except IOError: - return False - - return status == 1 diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfplpmget.py b/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfplpmget.py deleted file mode 100644 index 170766e9bce4..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfplpmget.py +++ /dev/null @@ -1,43 +0,0 @@ -#!/usr/bin/env python - -import sys, errno -import os -from python_sdk_api.sxd_api import * -from python_sdk_api.sx_api import * - -# Check if SFP port number is provided -if len(sys.argv) < 2: - print "SFP module number is missed." - print "Usage: sfplpmget.py " - sys.exit(errno.EINVAL) - -# Init SDK API -rc, handle = sx_api_open(None) -if (rc != SX_STATUS_SUCCESS): - print "Failed to open api handle.\nPlease check that SDK is running." - sys.exit(errno.EACCES) - -pid = os.getpid() -rc = sxd_access_reg_init(pid, None, 0) -if (rc != 0): - print "Failed to initializing register access.\nPlease check that SDK is running." - sys.exit(errno.EACCES) - -# Get SFP module number -sfp_module = int(sys.argv[1]) - -# Get MCION -mcion = ku_mcion_reg() -mcion.module = sfp_module -meta = sxd_reg_meta_t() -meta.dev_id = 1 -meta.swid = 0 -meta.access_cmd = SXD_ACCESS_CMD_GET - -rc = sxd_access_reg_mcion(mcion, meta, 1, None, None) -assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_mcion failed, rc = %d" % rc - -# Get low power mode status -lpm_mask = 1 << 8 -lpm_status = (lpm_mask & mcion.module_status_bits) != 0 -print "LPM ON" if lpm_status else "LPM OFF" diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfplpmset.py b/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfplpmset.py deleted file mode 100644 index 3f31af9f2944..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfplpmset.py +++ /dev/null @@ -1,107 +0,0 @@ -#!/usr/bin/env python - -import sys, errno -import time -import os -from python_sdk_api.sxd_api import * -from python_sdk_api.sx_api import * - -def get_log_ports(handle, sfp_module): - port_attributes_list = new_sx_port_attributes_t_arr(64) - port_cnt_p = new_uint32_t_p() - uint32_t_p_assign(port_cnt_p, 64) - - rc = sx_api_port_device_get(handle, 1 , 0, port_attributes_list, port_cnt_p) - assert rc == SX_STATUS_SUCCESS, "sx_api_port_device_get failed, rc = %d" % rc - - port_cnt = uint32_t_p_value(port_cnt_p) - log_port_list = [] - for i in range(0, port_cnt): - port_attributes = sx_port_attributes_t_arr_getitem(port_attributes_list, i) - if port_attributes.port_mapping.module_port == sfp_module: - log_port_list.append(port_attributes.log_port) - - return log_port_list - -def set_sfp_admin_status(handle, meta, sfp_module, sfp_log_port_list, admin_status): - # Get PMAOS - pmaos = ku_pmaos_reg() - pmaos.module = sfp_module - meta.access_cmd = SXD_ACCESS_CMD_GET - rc = sxd_access_reg_pmaos(pmaos, meta, 1, None, None) - assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmaos failed, rc = %d" % rc - - # Set admin status to PMAOS - pmaos.ase = 1 - pmaos.ee = 1 - pmaos.e = 2 - pmaos.rst = 0 - if admin_status == SX_PORT_ADMIN_STATUS_DOWN: - pmaos.admin_status = 2 - else: - pmaos.admin_status = 1 - - meta.access_cmd = SXD_ACCESS_CMD_SET - rc = sxd_access_reg_pmaos(pmaos, meta, 1, None, None) - assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmaos failed, rc = %d" % rc - -# Check if SFP port number is provided -if len(sys.argv) < 3: - print "SFP module number or LPM is missed." - print "Usage: sfplpmset.py " - sys.exit(errno.EINVAL) - -lpm_enable = None -if sys.argv[2] == 'on': - lpm_enable = True -elif sys.argv[2] == 'off': - lpm_enable = False -else: - print "Unrecognized LPM parameter. Please use or values" - sys.exit(errno.EINVAL) - -# Init SDK API -rc, handle = sx_api_open(None) -if (rc != SX_STATUS_SUCCESS): - print "Failed to open api handle.\nPlease check that SDK is running." - sys.exit(errno.EACCES) - -pid = os.getpid() -rc = sxd_access_reg_init(pid, None, 0) -if (rc != 0): - print "Failed to initializing register access.\nPlease check that SDK is running." - sys.exit(errno.EACCES); - -# Get SFP module and log ports number and LPM status -sfp_module = int(sys.argv[1]) -log_port_list = get_log_ports(handle, sfp_module) -if not log_port_list: - print "Failed to get log ports" - sys.exit(errno.EACCES) - -# Get PMMP -pmmp = ku_pmmp_reg() -pmmp.module = sfp_module -meta = sxd_reg_meta_t() -meta.dev_id = 1 -meta.swid = 0 -meta.access_cmd = SXD_ACCESS_CMD_GET -rc = sxd_access_reg_pmmp(pmmp, meta, 1, None, None) -assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmmp failed, rc = %d" % rc - -# Disable admin status before LPM settings -set_sfp_admin_status(handle, meta, sfp_module, log_port_list, SX_PORT_ADMIN_STATUS_DOWN) - -# Set low power mode status -lpm_mask = 1 << 8 -if lpm_enable: - pmmp.eeprom_override = pmmp.eeprom_override | lpm_mask -else: - pmmp.eeprom_override = pmmp.eeprom_override & (~lpm_mask) - -meta.access_cmd = SXD_ACCESS_CMD_SET -rc = sxd_access_reg_pmmp(pmmp, meta, 1, None, None) -assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmmp failed, rc = %d" % rc - -# Enable admin status after LPM settings -set_sfp_admin_status(handle, meta, sfp_module, log_port_list, SX_PORT_ADMIN_STATUS_UP) diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfpreset.py b/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfpreset.py deleted file mode 100644 index 69fa2be614c2..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfpreset.py +++ /dev/null @@ -1,45 +0,0 @@ -#!/usr/bin/env python - -import sys, errno -import os -from python_sdk_api.sxd_api import * -from python_sdk_api.sx_api import * - -# Check if SFP port number is provided -if len(sys.argv) < 2: - print "SFP module number or LPM is missed." - print "Usage: sfpreset.py " - sys.exit(errno.EINVAL) - -# Init SDK API -rc, handle = sx_api_open(None) -if (rc != SX_STATUS_SUCCESS): - print "Failed to open api handle.\nPlease check that SDK is running." - sys.exit(errno.EACCES) - -pid = os.getpid() -rc = sxd_access_reg_init(pid, None, 0) -if (rc != 0): - print "Failed to initializing register access.\nPlease check that SDK is running." - sys.exit(errno.EACCES) - -# Get SFP module number -sfp_module = int(sys.argv[1]) - -# Get PMAOS -pmaos = ku_pmaos_reg() -pmaos.module = sfp_module -meta = sxd_reg_meta_t() -meta.dev_id = 1 -meta.swid = 0 -meta.access_cmd = SXD_ACCESS_CMD_GET - -rc = sxd_access_reg_pmaos(pmaos, meta, 1, None, None) -assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmaos failed, rc = %d" % rc - -# Reset SFP -pmaos.rst = 1 -meta.access_cmd = SXD_ACCESS_CMD_SET -rc = sxd_access_reg_pmaos(pmaos, meta, 1, None, None) -assert rc == SXD_STATUS_SUCCESS, "sxd_access_reg_pmaos failed, rc = %d" % rc -print "Reset flag is set" diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py deleted file mode 100644 index 2eb3d628ff9f..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/plugins/sfputil.py +++ /dev/null @@ -1,190 +0,0 @@ -# sfputil.py -# -# Platform-specific SFP transceiver interface for SONiC -# - -try: - import time - import subprocess - from sonic_sfp.sfputilbase import SfpUtilBase -except ImportError as e: - raise ImportError("%s - required module not found" % str(e)) - -# parameters for DB connection -REDIS_HOSTNAME = "localhost" -REDIS_PORT = 6379 -REDIS_TIMEOUT_USECS = 0 - -class SfpUtil(SfpUtilBase): - """Platform-specific SfpUtil class""" - PORT_START = 0 - PORT_END = 31 - PORTS_IN_BLOCK = 32 - - EEPROM_OFFSET = 1 - - _port_to_eeprom_mapping = {} - - db_sel = None - db_sel_timeout = None - db_sel_object = None - db_sel_tbl = None - state_db = None - - @property - def port_start(self): - return self.PORT_START - - @property - def port_end(self): - return self.PORT_END - - @property - def qsfp_ports(self): - return range(0, self.PORTS_IN_BLOCK + 1) - - @property - def port_to_eeprom_mapping(self): - return self._port_to_eeprom_mapping - - def __init__(self): - eeprom_path = "/sys/class/i2c-adapter/i2c-2/2-0048/hwmon/hwmon7/qsfp{0}_eeprom" - - for x in range(0, self.port_end + 1): - self._port_to_eeprom_mapping[x] = eeprom_path.format(x + self.EEPROM_OFFSET) - - SfpUtilBase.__init__(self) - - def get_presence(self, port_num): - # Check for invalid port_num - if port_num < self.port_start or port_num > self.port_end: - return False - - try: - reg_file = open("/bsp/qsfp/qsfp%d_status" % (port_num+1)) - except IOError as e: - print "Error: unable to open file: %s" % str(e) - return False - - content = reg_file.readline().rstrip() - - # content is a string with the qsfp status - if content == "good": - return True - - return False - - def get_low_power_mode(self, port_num): - # Check for invalid port_num - if port_num < self.port_start or port_num > self.port_end: - return False - - lpm_cmd = "docker exec syncd python /usr/share/sonic/platform/plugins/sfplpmget.py {}".format(port_num) - - try: - output = subprocess.check_output(lpm_cmd, shell=True) - if 'LPM ON' in output: - return True - except subprocess.CalledProcessError as e: - print "Error! Unable to get LPM for {}, rc = {}, err msg: {}".format(port_num, e.returncode, e.output) - return False - - return False - - def set_low_power_mode(self, port_num, lpmode): - # Check for invalid port_num - if port_num < self.port_start or port_num > self.port_end: - return False - - curr_lpmode = self.get_low_power_mode(port_num) - if curr_lpmode == lpmode: - return True - - lpm = 'on' if lpmode else 'off' - lpm_cmd = "docker exec syncd python /usr/share/sonic/platform/plugins/sfplpmset.py {} {}".format(port_num, lpm) - sfp_port_names = self.physical_to_logical[port_num] - - # Get port admin status - try: - enabled_ports = subprocess.check_output("ip link show up", shell=True) - except subprocess.CalledProcessError as e: - print "Error! Unable to get ports status, err msg: {}".format(e.output) - return False - - port_to_disable = [] - for port in sfp_port_names: - if port in enabled_ports: - port_to_disable.append(port) - - # Disable ports before LPM settings - for port in port_to_disable: - try: - subprocess.check_output("ifconfig {} down".format(port), shell=True) - except subprocess.CalledProcessError as e: - print "Error! Unable to set admin status to DOWN for {}, rc = {}, err msg: {}".format(port, e.returncode, e.output) - return False - - time.sleep(3) - - # Set LPM - try: - subprocess.check_output(lpm_cmd, shell=True) - except subprocess.CalledProcessError as e: - print "Error! Unable to set LPM for {}, rc = {}, err msg: {}".format(port_num, e.returncode, e.output) - return False - - # Enable ports after LPM settings - for port in port_to_disable: - try: - subprocess.check_output("ifconfig {} up".format(port), shell=True) - except subprocess.CalledProcessError as e: - print "Error! Unable to set admin status to UP for {}, rc = {}, err msg: {}".format(port, e.returncode, e.output) - return False - - return True - - def reset(self, port_num): - # Check for invalid port_num - if port_num < self.port_start or port_num > self.port_end: - return False - - lpm_cmd = "docker exec syncd python /usr/share/sonic/platform/plugins/sfpreset.py {}".format(port_num) - - try: - subprocess.check_output(lpm_cmd, shell=True) - return True - except subprocess.CalledProcessError as e: - print "Error! Unable to set LPM for {}, rc = {}, err msg: {}".format(port_num, e.returncode, e.output) - return False - - return False - - def get_transceiver_change_event(self, timeout=0): - phy_port_dict = {} - status = True - - if self.db_sel == None: - from swsscommon import swsscommon - self.state_db = swsscommon.DBConnector(swsscommon.STATE_DB, - REDIS_HOSTNAME, - REDIS_PORT, - REDIS_TIMEOUT_USECS) - - # Subscribe to state table for SFP change notifications - self.db_sel = swsscommon.Select() - self.db_sel_tbl = swsscommon.NotificationConsumer(self.state_db, 'TRANSCEIVER_NOTIFY') - self.db_sel.addSelectable(self.db_sel_tbl) - self.db_sel_timeout = swsscommon.Select.TIMEOUT - self.db_sel_object = swsscommon.Select.OBJECT - - (state, c) = self.db_sel.select(timeout) - if state == self.db_sel_timeout: - status = True - elif state != self.db_sel_object: - status = False - else: - (key, op, fvp) = self.db_sel_tbl.pop() - phy_port_dict[key] = op - - return status, phy_port_dict - diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/sensors.conf b/device/mellanox/x86_64-mlnx_lssn2700-r0/sensors.conf deleted file mode 100644 index a3e30391863e..000000000000 --- a/device/mellanox/x86_64-mlnx_lssn2700-r0/sensors.conf +++ /dev/null @@ -1,21 +0,0 @@ -bus "i2c-7" "i2c-1-mux (chan_id 5)" -chip "lm75-i2c-7-4a" - label temp1 "Ambient Port Temp" - -bus "i2c-5" "i2c-1-mux (chan_id 3)" -chip "ucd9200-i2c-5-27" - label in1 "UCD1 vin" - label in2 "ASIC 3.3 vout" - label in3 "ASIC 1.2 vout" - label temp1 "UCD1 Temp" - label temp2 "UCD1 Temp2" - -chip "ucd9200-i2c-5-41" - label in1 "UCD2 vin" - label in2 "ASIC Vcore vout" - label temp1 "UCD2 Temp1" - label temp2 "UCD2 Temp2" - -bus "i2c-17" "i2c-1-mux (chan_id 7)" -chip "lm75-i2c-17-49" - label temp1 "Ambient Board Temp" diff --git a/device/mellanox/x86_64-mlnx_lssn2700-r0/sensors.conf b/device/mellanox/x86_64-mlnx_lssn2700-r0/sensors.conf new file mode 120000 index 000000000000..ea04d66d008c --- /dev/null +++ b/device/mellanox/x86_64-mlnx_lssn2700-r0/sensors.conf @@ -0,0 +1 @@ +../x86_64-mlnx_msn2700-r0/sensors.conf \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/pg_profile_lookup.ini b/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/pg_profile_lookup.ini deleted file mode 100644 index b66b129fe43f..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/pg_profile_lookup.ini +++ /dev/null @@ -1,17 +0,0 @@ -# PG lossless profiles. -# speed cable size xon xoff threshold - 10000 5m 34816 18432 16384 0 - 25000 5m 34816 18432 16384 0 - 40000 5m 34816 18432 16384 0 - 50000 5m 34816 18432 16384 0 - 100000 5m 36864 18432 18432 0 - 10000 40m 36864 18432 18432 0 - 25000 40m 39936 18432 21504 0 - 40000 40m 41984 18432 23552 0 - 50000 40m 41984 18432 23552 0 - 100000 40m 54272 18432 35840 0 - 10000 300m 49152 18432 30720 0 - 25000 300m 71680 18432 53248 0 - 40000 300m 94208 18432 75776 0 - 50000 300m 94208 18432 75776 0 - 100000 300m 184320 18432 165888 0 diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/pg_profile_lookup.ini b/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/pg_profile_lookup.ini new file mode 120000 index 000000000000..3c97f3dcb16f --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/pg_profile_lookup.ini @@ -0,0 +1 @@ +../../x86_64-mlnx_msn2700-r0/ACS-MSN2700/pg_profile_lookup.ini \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/installer.conf b/device/mellanox/x86_64-mlnx_msn2100-r0/installer.conf deleted file mode 100644 index c9c9493a5404..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/installer.conf +++ /dev/null @@ -1 +0,0 @@ -ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="acpi_enforce_resources=lax acpi=noirq" diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/installer.conf b/device/mellanox/x86_64-mlnx_msn2100-r0/installer.conf new file mode 120000 index 000000000000..955db12ff425 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2100-r0/installer.conf @@ -0,0 +1 @@ +../x86_64-mlnx_msn2700-r0/installer.conf \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/sensors.conf b/device/mellanox/x86_64-mlnx_msn2100-r0/sensors.conf deleted file mode 100644 index a3e30391863e..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/sensors.conf +++ /dev/null @@ -1,21 +0,0 @@ -bus "i2c-7" "i2c-1-mux (chan_id 5)" -chip "lm75-i2c-7-4a" - label temp1 "Ambient Port Temp" - -bus "i2c-5" "i2c-1-mux (chan_id 3)" -chip "ucd9200-i2c-5-27" - label in1 "UCD1 vin" - label in2 "ASIC 3.3 vout" - label in3 "ASIC 1.2 vout" - label temp1 "UCD1 Temp" - label temp2 "UCD1 Temp2" - -chip "ucd9200-i2c-5-41" - label in1 "UCD2 vin" - label in2 "ASIC Vcore vout" - label temp1 "UCD2 Temp1" - label temp2 "UCD2 Temp2" - -bus "i2c-17" "i2c-1-mux (chan_id 7)" -chip "lm75-i2c-17-49" - label temp1 "Ambient Board Temp" diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/sensors.conf b/device/mellanox/x86_64-mlnx_msn2100-r0/sensors.conf new file mode 120000 index 000000000000..ea04d66d008c --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2100-r0/sensors.conf @@ -0,0 +1 @@ +../x86_64-mlnx_msn2700-r0/sensors.conf \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/pg_profile_lookup.ini b/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/pg_profile_lookup.ini deleted file mode 100644 index b66b129fe43f..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/pg_profile_lookup.ini +++ /dev/null @@ -1,17 +0,0 @@ -# PG lossless profiles. -# speed cable size xon xoff threshold - 10000 5m 34816 18432 16384 0 - 25000 5m 34816 18432 16384 0 - 40000 5m 34816 18432 16384 0 - 50000 5m 34816 18432 16384 0 - 100000 5m 36864 18432 18432 0 - 10000 40m 36864 18432 18432 0 - 25000 40m 39936 18432 21504 0 - 40000 40m 41984 18432 23552 0 - 50000 40m 41984 18432 23552 0 - 100000 40m 54272 18432 35840 0 - 10000 300m 49152 18432 30720 0 - 25000 300m 71680 18432 53248 0 - 40000 300m 94208 18432 75776 0 - 50000 300m 94208 18432 75776 0 - 100000 300m 184320 18432 165888 0 diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/pg_profile_lookup.ini b/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/pg_profile_lookup.ini new file mode 120000 index 000000000000..3c97f3dcb16f --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/pg_profile_lookup.ini @@ -0,0 +1 @@ +../../x86_64-mlnx_msn2700-r0/ACS-MSN2700/pg_profile_lookup.ini \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/installer.conf b/device/mellanox/x86_64-mlnx_msn2410-r0/installer.conf deleted file mode 100644 index c9c9493a5404..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/installer.conf +++ /dev/null @@ -1 +0,0 @@ -ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="acpi_enforce_resources=lax acpi=noirq" diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/installer.conf b/device/mellanox/x86_64-mlnx_msn2410-r0/installer.conf new file mode 120000 index 000000000000..955db12ff425 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2410-r0/installer.conf @@ -0,0 +1 @@ +../x86_64-mlnx_msn2700-r0/installer.conf \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/sensors.conf b/device/mellanox/x86_64-mlnx_msn2410-r0/sensors.conf deleted file mode 100644 index a3e30391863e..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/sensors.conf +++ /dev/null @@ -1,21 +0,0 @@ -bus "i2c-7" "i2c-1-mux (chan_id 5)" -chip "lm75-i2c-7-4a" - label temp1 "Ambient Port Temp" - -bus "i2c-5" "i2c-1-mux (chan_id 3)" -chip "ucd9200-i2c-5-27" - label in1 "UCD1 vin" - label in2 "ASIC 3.3 vout" - label in3 "ASIC 1.2 vout" - label temp1 "UCD1 Temp" - label temp2 "UCD1 Temp2" - -chip "ucd9200-i2c-5-41" - label in1 "UCD2 vin" - label in2 "ASIC Vcore vout" - label temp1 "UCD2 Temp1" - label temp2 "UCD2 Temp2" - -bus "i2c-17" "i2c-1-mux (chan_id 7)" -chip "lm75-i2c-17-49" - label temp1 "Ambient Board Temp" diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/sensors.conf b/device/mellanox/x86_64-mlnx_msn2410-r0/sensors.conf new file mode 120000 index 000000000000..ea04d66d008c --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2410-r0/sensors.conf @@ -0,0 +1 @@ +../x86_64-mlnx_msn2700-r0/sensors.conf \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers.json.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers.json.j2 deleted file mode 100644 index 1083a6210fc9..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers.json.j2 +++ /dev/null @@ -1,2 +0,0 @@ -{%- set default_topo = 't0' %} -{%- include 'buffers_config.j2' %} diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers.json.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers.json.j2 new file mode 120000 index 000000000000..30c4e1d5bfdd --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers.json.j2 @@ -0,0 +1 @@ +../ACS-MSN2700/buffers.json.j2 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t0.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t0.j2 deleted file mode 100644 index 475a0227143c..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t0.j2 +++ /dev/null @@ -1,90 +0,0 @@ -{% set default_cable = '5m' %} -{% set ingress_lossless_pool_size = '4194304' %} -{% set ingress_lossy_pool_size = '7340032' %} -{% set egress_lossless_pool_size = '16777152' %} -{% set egress_lossy_pool_size = '7340032' %} - -{%- macro generate_port_lists(PORT_ALL) %} - {# Generate list of ports #} - {%- for port_idx in range(0, 32) %} - {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} - {%- endfor %} -{%- endmacro %} - -{%- macro generate_buffer_pool_and_profiles() %} - "BUFFER_POOL": { - "ingress_lossless_pool": { - "size": "{{ ingress_lossless_pool_size }}", - "type": "ingress", - "mode": "dynamic" - }, - "ingress_lossy_pool": { - "size": "{{ ingress_lossy_pool_size }}", - "type": "ingress", - "mode": "dynamic" - }, - "egress_lossless_pool": { - "size": "{{ egress_lossless_pool_size }}", - "type": "egress", - "mode": "dynamic" - }, - "egress_lossy_pool": { - "size": "{{ egress_lossy_pool_size }}", - "type": "egress", - "mode": "dynamic" - } - }, - "BUFFER_PROFILE": { - "ingress_lossless_profile": { - "pool":"[BUFFER_POOL|ingress_lossless_pool]", - "size":"0", - "dynamic_th":"0" - }, - "ingress_lossy_profile": { - "pool":"[BUFFER_POOL|ingress_lossy_pool]", - "size":"0", - "dynamic_th":"3" - }, - "egress_lossless_profile": { - "pool":"[BUFFER_POOL|egress_lossless_pool]", - "size":"0", - "dynamic_th":"7" - }, - "egress_lossy_profile": { - "pool":"[BUFFER_POOL|egress_lossy_pool]", - "size":"4096", - "dynamic_th":"3" - }, - "q_lossy_profile": { - "pool":"[BUFFER_POOL|egress_lossy_pool]", - "size":"0", - "dynamic_th":"3" - } - }, -{%- endmacro %} - -{%- macro generate_profile_lists(port_names) %} - "BUFFER_PORT_INGRESS_PROFILE_LIST": { - "{{ port_names }}": { - "profile_list" : "[BUFFER_PROFILE|ingress_lossless_profile],[BUFFER_PROFILE|ingress_lossy_profile]" - } - }, - "BUFFER_PORT_EGRESS_PROFILE_LIST": { - "{{ port_names }}": { - "profile_list" : "[BUFFER_PROFILE|egress_lossless_profile],[BUFFER_PROFILE|egress_lossy_profile]" - } - } -{%- endmacro %} - -{%- macro generate_queue_buffers(port_names) %} - "BUFFER_QUEUE": { - "{{ port_names }}|3-4": { - "profile" : "[BUFFER_PROFILE|egress_lossless_profile]" - }, - "{{ port_names }}|0-1": { - "profile" : "[BUFFER_PROFILE|q_lossy_profile]" - } - } -{%- endmacro %} - - diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t0.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t0.j2 new file mode 120000 index 000000000000..a722094938f8 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t0.j2 @@ -0,0 +1 @@ +../ACS-MSN2700/buffers_defaults_t0.j2 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t1.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t1.j2 deleted file mode 100644 index c292ecc2f21a..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t1.j2 +++ /dev/null @@ -1,90 +0,0 @@ -{% set default_cable = '5m' %} -{% set ingress_lossless_pool_size = '2097152' %} -{% set ingress_lossy_pool_size = '5242880' %} -{% set egress_lossless_pool_size = '16777152' %} -{% set egress_lossy_pool_size = '5242880' %} - -{%- macro generate_port_lists(PORT_ALL) %} - {# Generate list of ports #} - {%- for port_idx in range(0, 32) %} - {%- if PORT_ALL.append("Ethernet%d" % (port_idx)) %}{%- endif %} - {%- endfor %} -{%- endmacro %} - -{%- macro generate_buffer_pool_and_profiles() %} - "BUFFER_POOL": { - "ingress_lossless_pool": { - "size": "{{ ingress_lossless_pool_size }}", - "type": "ingress", - "mode": "dynamic" - }, - "ingress_lossy_pool": { - "size": "{{ ingress_lossy_pool_size }}", - "type": "ingress", - "mode": "dynamic" - }, - "egress_lossless_pool": { - "size": "{{ egress_lossless_pool_size }}", - "type": "egress", - "mode": "dynamic" - }, - "egress_lossy_pool": { - "size": "{{ egress_lossy_pool_size }}", - "type": "egress", - "mode": "dynamic" - } - }, - "BUFFER_PROFILE": { - "ingress_lossless_profile": { - "pool":"[BUFFER_POOL|ingress_lossless_pool]", - "size":"0", - "dynamic_th":"0" - }, - "ingress_lossy_profile": { - "pool":"[BUFFER_POOL|ingress_lossy_pool]", - "size":"0", - "dynamic_th":"3" - }, - "egress_lossless_profile": { - "pool":"[BUFFER_POOL|egress_lossless_pool]", - "size":"0", - "dynamic_th":"7" - }, - "egress_lossy_profile": { - "pool":"[BUFFER_POOL|egress_lossy_pool]", - "size":"4096", - "dynamic_th":"3" - }, - "q_lossy_profile": { - "pool":"[BUFFER_POOL|egress_lossy_pool]", - "size":"0", - "dynamic_th":"3" - } - }, -{%- endmacro %} - -{%- macro generate_profile_lists(port_names) %} - "BUFFER_PORT_INGRESS_PROFILE_LIST": { - "{{ port_names }}": { - "profile_list" : "[BUFFER_PROFILE|ingress_lossless_profile],[BUFFER_PROFILE|ingress_lossy_profile]" - } - }, - "BUFFER_PORT_EGRESS_PROFILE_LIST": { - "{{ port_names }}": { - "profile_list" : "[BUFFER_PROFILE|egress_lossless_profile],[BUFFER_PROFILE|egress_lossy_profile]" - } - } -{%- endmacro %} - -{%- macro generate_queue_buffers(port_names) %} - "BUFFER_QUEUE": { - "{{ port_names }}|3-4": { - "profile" : "[BUFFER_PROFILE|egress_lossless_profile]" - }, - "{{ port_names }}|0-1": { - "profile" : "[BUFFER_PROFILE|q_lossy_profile]" - } - } -{%- endmacro %} - - diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t1.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t1.j2 new file mode 120000 index 000000000000..b02d5e0194ac --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/buffers_defaults_t1.j2 @@ -0,0 +1 @@ +../ACS-MSN2700/buffers_defaults_t1.j2 \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/pg_profile_lookup.ini b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/pg_profile_lookup.ini deleted file mode 100644 index b66b129fe43f..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/pg_profile_lookup.ini +++ /dev/null @@ -1,17 +0,0 @@ -# PG lossless profiles. -# speed cable size xon xoff threshold - 10000 5m 34816 18432 16384 0 - 25000 5m 34816 18432 16384 0 - 40000 5m 34816 18432 16384 0 - 50000 5m 34816 18432 16384 0 - 100000 5m 36864 18432 18432 0 - 10000 40m 36864 18432 18432 0 - 25000 40m 39936 18432 21504 0 - 40000 40m 41984 18432 23552 0 - 50000 40m 41984 18432 23552 0 - 100000 40m 54272 18432 35840 0 - 10000 300m 49152 18432 30720 0 - 25000 300m 71680 18432 53248 0 - 40000 300m 94208 18432 75776 0 - 50000 300m 94208 18432 75776 0 - 100000 300m 184320 18432 165888 0 diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/pg_profile_lookup.ini b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/pg_profile_lookup.ini new file mode 120000 index 000000000000..229a556f88a8 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/pg_profile_lookup.ini @@ -0,0 +1 @@ +../ACS-MSN2700/pg_profile_lookup.ini \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/ACS-MSN2740/pg_profile_lookup.ini b/device/mellanox/x86_64-mlnx_msn2740-r0/ACS-MSN2740/pg_profile_lookup.ini deleted file mode 100644 index b66b129fe43f..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2740-r0/ACS-MSN2740/pg_profile_lookup.ini +++ /dev/null @@ -1,17 +0,0 @@ -# PG lossless profiles. -# speed cable size xon xoff threshold - 10000 5m 34816 18432 16384 0 - 25000 5m 34816 18432 16384 0 - 40000 5m 34816 18432 16384 0 - 50000 5m 34816 18432 16384 0 - 100000 5m 36864 18432 18432 0 - 10000 40m 36864 18432 18432 0 - 25000 40m 39936 18432 21504 0 - 40000 40m 41984 18432 23552 0 - 50000 40m 41984 18432 23552 0 - 100000 40m 54272 18432 35840 0 - 10000 300m 49152 18432 30720 0 - 25000 300m 71680 18432 53248 0 - 40000 300m 94208 18432 75776 0 - 50000 300m 94208 18432 75776 0 - 100000 300m 184320 18432 165888 0 diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/ACS-MSN2740/pg_profile_lookup.ini b/device/mellanox/x86_64-mlnx_msn2740-r0/ACS-MSN2740/pg_profile_lookup.ini new file mode 120000 index 000000000000..3c97f3dcb16f --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2740-r0/ACS-MSN2740/pg_profile_lookup.ini @@ -0,0 +1 @@ +../../x86_64-mlnx_msn2700-r0/ACS-MSN2700/pg_profile_lookup.ini \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/installer.conf b/device/mellanox/x86_64-mlnx_msn2740-r0/installer.conf deleted file mode 100644 index c9c9493a5404..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2740-r0/installer.conf +++ /dev/null @@ -1 +0,0 @@ -ONIE_PLATFORM_EXTRA_CMDLINE_LINUX="acpi_enforce_resources=lax acpi=noirq" diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/installer.conf b/device/mellanox/x86_64-mlnx_msn2740-r0/installer.conf new file mode 120000 index 000000000000..955db12ff425 --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2740-r0/installer.conf @@ -0,0 +1 @@ +../x86_64-mlnx_msn2700-r0/installer.conf \ No newline at end of file diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/sensors.conf b/device/mellanox/x86_64-mlnx_msn2740-r0/sensors.conf deleted file mode 100644 index a3e30391863e..000000000000 --- a/device/mellanox/x86_64-mlnx_msn2740-r0/sensors.conf +++ /dev/null @@ -1,21 +0,0 @@ -bus "i2c-7" "i2c-1-mux (chan_id 5)" -chip "lm75-i2c-7-4a" - label temp1 "Ambient Port Temp" - -bus "i2c-5" "i2c-1-mux (chan_id 3)" -chip "ucd9200-i2c-5-27" - label in1 "UCD1 vin" - label in2 "ASIC 3.3 vout" - label in3 "ASIC 1.2 vout" - label temp1 "UCD1 Temp" - label temp2 "UCD1 Temp2" - -chip "ucd9200-i2c-5-41" - label in1 "UCD2 vin" - label in2 "ASIC Vcore vout" - label temp1 "UCD2 Temp1" - label temp2 "UCD2 Temp2" - -bus "i2c-17" "i2c-1-mux (chan_id 7)" -chip "lm75-i2c-17-49" - label temp1 "Ambient Board Temp" diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/sensors.conf b/device/mellanox/x86_64-mlnx_msn2740-r0/sensors.conf new file mode 120000 index 000000000000..ea04d66d008c --- /dev/null +++ b/device/mellanox/x86_64-mlnx_msn2740-r0/sensors.conf @@ -0,0 +1 @@ +../x86_64-mlnx_msn2700-r0/sensors.conf \ No newline at end of file diff --git a/src/sonic-device-data/Makefile b/src/sonic-device-data/Makefile index dc45dc6bff9f..911c8641a682 100644 --- a/src/sonic-device-data/Makefile +++ b/src/sonic-device-data/Makefile @@ -12,7 +12,7 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # Create a new dir and copy all ONIE-platform-string-named dirs into it mkdir ./device - cp -r ../../../device/*/* ./device/ + cp -r -H ../../../device/*/* ./device/ # Build the package dpkg-buildpackage -rfakeroot -b -us -uc From fd5bce57ddadf4ea7214c4c3538a280fec66ac42 Mon Sep 17 00:00:00 2001 From: Pradchaya P Date: Fri, 17 Aug 2018 00:38:33 +0700 Subject: [PATCH 153/180] [device/dx010] configuration port index start from 1 (#1927) * update sfputil, port indext start from 1 * DX010 update SKUs port config index Port index in port_config.ini now start from 1. * Seastone-DX010-10-50 port config update * Seastone-DX010-50 port config update * Seastone-DX010 port config update * Update dx010 sfputil plugin * Implement lpmode set function. * Implement transceiver reset function. * Python code style format. * Remove new line at the end of port_config.ini *New line cause parsing error in sfputilbase. * Add get_transceiver_change_event method *This needed by new sfputilbase implement. * Fix unintended line breaks --- .../Seastone-DX010-10-50/port_config.ini | 224 +++++++++--------- .../Seastone-DX010-50/port_config.ini | 128 +++++----- .../Seastone-DX010/port_config.ini | 64 ++--- .../x86_64-cel_seastone-r0/plugins/sfputil.py | 120 +++++++++- 4 files changed, 319 insertions(+), 217 deletions(-) mode change 100755 => 100644 device/celestica/x86_64-cel_seastone-r0/plugins/sfputil.py diff --git a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/port_config.ini b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/port_config.ini index 383cc5a6a7ab..7f977a26e1f3 100644 --- a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/port_config.ini +++ b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/port_config.ini @@ -1,113 +1,113 @@ # name lanes alias index speed -Ethernet0 65 Eth1/1 0 10000 -Ethernet1 66 Eth1/2 0 10000 -Ethernet2 67 Eth1/3 0 10000 -Ethernet3 68 Eth1/4 0 10000 -Ethernet4 69 Eth2/1 1 10000 -Ethernet5 70 Eth2/2 1 10000 -Ethernet6 71 Eth2/3 1 10000 -Ethernet7 72 Eth2/4 1 10000 -Ethernet8 73 Eth3/1 2 10000 -Ethernet9 74 Eth3/2 2 10000 -Ethernet10 75 Eth3/3 2 10000 -Ethernet11 76 Eth3/4 2 10000 -Ethernet12 77 Eth4/1 3 10000 -Ethernet13 78 Eth4/2 3 10000 -Ethernet14 79 Eth4/3 3 10000 -Ethernet15 80 Eth4/4 3 10000 -Ethernet16 33 Eth5/1 4 10000 -Ethernet17 34 Eth5/2 4 10000 -Ethernet18 35 Eth5/3 4 10000 -Ethernet19 36 Eth5/4 4 10000 -Ethernet20 37 Eth6/1 5 10000 -Ethernet21 38 Eth6/2 5 10000 -Ethernet22 39 Eth6/3 5 10000 -Ethernet23 40 Eth6/4 5 10000 -Ethernet24 41 Eth7/1 6 10000 -Ethernet25 42 Eth7/2 6 10000 -Ethernet26 43 Eth7/3 6 10000 -Ethernet27 44 Eth7/4 6 10000 -Ethernet28 45 Eth8/1 7 10000 -Ethernet29 46 Eth8/2 7 10000 -Ethernet30 47 Eth8/3 7 10000 -Ethernet31 48 Eth8/4 7 10000 -Ethernet32 49 Eth9/1 8 10000 -Ethernet33 50 Eth9/2 8 10000 -Ethernet34 51 Eth9/3 8 10000 -Ethernet35 52 Eth9/4 8 10000 -Ethernet36 53 Eth10/1 9 10000 -Ethernet37 54 Eth10/2 9 10000 -Ethernet38 55 Eth10/3 9 10000 -Ethernet39 56 Eth10/4 9 10000 -Ethernet40 57 Eth11/1 10 10000 -Ethernet41 58 Eth11/2 10 10000 -Ethernet42 59 Eth11/3 10 10000 -Ethernet43 60 Eth11/4 10 10000 -Ethernet44 61 Eth12/1 11 10000 -Ethernet45 62 Eth12/2 11 10000 -Ethernet46 63 Eth12/3 11 10000 -Ethernet47 64 Eth12/4 11 10000 -Ethernet48 81 Eth13/1 12 10000 -Ethernet49 82 Eth13/2 12 10000 -Ethernet50 83 Eth13/3 12 10000 -Ethernet51 84 Eth13/4 12 10000 -Ethernet52 85 Eth14/1 13 10000 -Ethernet53 86 Eth14/2 13 10000 -Ethernet54 87 Eth14/3 13 10000 -Ethernet55 88 Eth14/4 13 10000 -Ethernet56 89 Eth15/1 14 10000 -Ethernet57 90 Eth15/2 14 10000 -Ethernet58 91 Eth15/3 14 10000 -Ethernet59 92 Eth15/4 14 10000 -Ethernet60 93 Eth16/1 15 10000 -Ethernet61 94 Eth16/2 15 10000 -Ethernet62 95 Eth16/3 15 10000 -Ethernet63 96 Eth16/4 15 10000 -Ethernet64 97 Eth17/1 16 10000 -Ethernet65 98 Eth17/2 16 10000 -Ethernet66 99 Eth17/3 16 10000 -Ethernet67 100 Eth17/4 16 10000 -Ethernet68 101 Eth18/1 17 10000 -Ethernet69 102 Eth18/2 17 10000 -Ethernet70 103 Eth18/3 17 10000 -Ethernet71 104 Eth18/4 17 10000 -Ethernet72 105 Eth19/1 18 10000 -Ethernet73 106 Eth19/2 18 10000 -Ethernet74 107 Eth19/3 18 10000 -Ethernet75 108 Eth19/4 18 10000 -Ethernet76 109 Eth20/1 19 10000 -Ethernet77 110 Eth20/2 19 10000 -Ethernet78 111 Eth20/3 19 10000 -Ethernet79 112 Eth20/4 19 10000 -Ethernet80 1 Eth21/1 20 10000 -Ethernet81 2 Eth21/2 20 10000 -Ethernet82 3 Eth21/3 20 10000 -Ethernet83 4 Eth21/4 20 10000 -Ethernet84 5 Eth22/1 21 10000 -Ethernet85 6 Eth22/2 21 10000 -Ethernet86 7 Eth22/3 21 10000 -Ethernet87 8 Eth22/4 21 10000 -Ethernet88 9 Eth23/1 22 10000 -Ethernet89 10 Eth23/2 22 10000 -Ethernet90 11 Eth23/3 22 10000 -Ethernet91 12 Eth23/4 22 10000 -Ethernet92 13 Eth24/1 23 10000 -Ethernet93 14 Eth24/2 23 10000 -Ethernet94 15 Eth24/3 23 10000 -Ethernet95 16 Eth24/4 23 10000 -Ethernet96 17,18 Eth25/1 24 50000 -Ethernet98 19,20 Eth25/2 24 50000 -Ethernet100 21,22 Eth26/1 25 50000 -Ethernet102 23,24 Eth26/2 25 50000 -Ethernet104 25,26 Eth27/1 26 50000 -Ethernet106 27,28 Eth27/2 26 50000 -Ethernet108 29,30 Eth28/1 27 50000 -Ethernet110 31,32 Eth28/2 27 50000 -Ethernet112 113,114 Eth29/1 28 50000 -Ethernet114 115,116 Eth29/2 28 50000 -Ethernet116 117,118 Eth30/1 29 50000 -Ethernet118 119,120 Eth30/2 29 50000 -Ethernet120 121,122 Eth31/1 30 50000 -Ethernet122 123,124 Eth31/2 30 50000 -Ethernet124 125,126 Eth32/1 31 50000 -Ethernet126 127,128 Eth32/2 31 50000 +Ethernet0 65 Eth1/1 1 10000 +Ethernet1 66 Eth1/2 1 10000 +Ethernet2 67 Eth1/3 1 10000 +Ethernet3 68 Eth1/4 1 10000 +Ethernet4 69 Eth2/1 2 10000 +Ethernet5 70 Eth2/2 2 10000 +Ethernet6 71 Eth2/3 2 10000 +Ethernet7 72 Eth2/4 2 10000 +Ethernet8 73 Eth3/1 3 10000 +Ethernet9 74 Eth3/2 3 10000 +Ethernet10 75 Eth3/3 3 10000 +Ethernet11 76 Eth3/4 3 10000 +Ethernet12 77 Eth4/1 4 10000 +Ethernet13 78 Eth4/2 4 10000 +Ethernet14 79 Eth4/3 4 10000 +Ethernet15 80 Eth4/4 4 10000 +Ethernet16 33 Eth5/1 5 10000 +Ethernet17 34 Eth5/2 5 10000 +Ethernet18 35 Eth5/3 5 10000 +Ethernet19 36 Eth5/4 5 10000 +Ethernet20 37 Eth6/1 6 10000 +Ethernet21 38 Eth6/2 6 10000 +Ethernet22 39 Eth6/3 6 10000 +Ethernet23 40 Eth6/4 6 10000 +Ethernet24 41 Eth7/1 7 10000 +Ethernet25 42 Eth7/2 7 10000 +Ethernet26 43 Eth7/3 7 10000 +Ethernet27 44 Eth7/4 7 10000 +Ethernet28 45 Eth8/1 8 10000 +Ethernet29 46 Eth8/2 8 10000 +Ethernet30 47 Eth8/3 8 10000 +Ethernet31 48 Eth8/4 8 10000 +Ethernet32 49 Eth9/1 9 10000 +Ethernet33 50 Eth9/2 9 10000 +Ethernet34 51 Eth9/3 9 10000 +Ethernet35 52 Eth9/4 9 10000 +Ethernet36 53 Eth10/1 10 10000 +Ethernet37 54 Eth10/2 10 10000 +Ethernet38 55 Eth10/3 10 10000 +Ethernet39 56 Eth10/4 10 10000 +Ethernet40 57 Eth11/1 11 10000 +Ethernet41 58 Eth11/2 11 10000 +Ethernet42 59 Eth11/3 11 10000 +Ethernet43 60 Eth11/4 11 10000 +Ethernet44 61 Eth12/1 12 10000 +Ethernet45 62 Eth12/2 12 10000 +Ethernet46 63 Eth12/3 12 10000 +Ethernet47 64 Eth12/4 12 10000 +Ethernet48 81 Eth13/1 13 10000 +Ethernet49 82 Eth13/2 13 10000 +Ethernet50 83 Eth13/3 13 10000 +Ethernet51 84 Eth13/4 13 10000 +Ethernet52 85 Eth14/1 14 10000 +Ethernet53 86 Eth14/2 14 10000 +Ethernet54 87 Eth14/3 14 10000 +Ethernet55 88 Eth14/4 14 10000 +Ethernet56 89 Eth15/1 15 10000 +Ethernet57 90 Eth15/2 15 10000 +Ethernet58 91 Eth15/3 15 10000 +Ethernet59 92 Eth15/4 15 10000 +Ethernet60 93 Eth16/1 16 10000 +Ethernet61 94 Eth16/2 16 10000 +Ethernet62 95 Eth16/3 16 10000 +Ethernet63 96 Eth16/4 16 10000 +Ethernet64 97 Eth17/1 17 10000 +Ethernet65 98 Eth17/2 17 10000 +Ethernet66 99 Eth17/3 17 10000 +Ethernet67 100 Eth17/4 17 10000 +Ethernet68 101 Eth18/1 18 10000 +Ethernet69 102 Eth18/2 18 10000 +Ethernet70 103 Eth18/3 18 10000 +Ethernet71 104 Eth18/4 18 10000 +Ethernet72 105 Eth19/1 19 10000 +Ethernet73 106 Eth19/2 19 10000 +Ethernet74 107 Eth19/3 19 10000 +Ethernet75 108 Eth19/4 19 10000 +Ethernet76 109 Eth20/1 20 10000 +Ethernet77 110 Eth20/2 20 10000 +Ethernet78 111 Eth20/3 20 10000 +Ethernet79 112 Eth20/4 20 10000 +Ethernet80 1 Eth21/1 21 10000 +Ethernet81 2 Eth21/2 21 10000 +Ethernet82 3 Eth21/3 21 10000 +Ethernet83 4 Eth21/4 21 10000 +Ethernet84 5 Eth22/1 22 10000 +Ethernet85 6 Eth22/2 22 10000 +Ethernet86 7 Eth22/3 22 10000 +Ethernet87 8 Eth22/4 22 10000 +Ethernet88 9 Eth23/1 23 10000 +Ethernet89 10 Eth23/2 23 10000 +Ethernet90 11 Eth23/3 23 10000 +Ethernet91 12 Eth23/4 23 10000 +Ethernet92 13 Eth24/1 24 10000 +Ethernet93 14 Eth24/2 24 10000 +Ethernet94 15 Eth24/3 25 10000 +Ethernet95 16 Eth24/4 25 10000 +Ethernet96 17,18 Eth25/1 26 50000 +Ethernet98 19,20 Eth25/2 26 50000 +Ethernet100 21,22 Eth26/1 27 50000 +Ethernet102 23,24 Eth26/2 27 50000 +Ethernet104 25,26 Eth27/1 28 50000 +Ethernet106 27,28 Eth27/2 28 50000 +Ethernet108 29,30 Eth28/1 29 50000 +Ethernet110 31,32 Eth28/2 29 50000 +Ethernet112 113,114 Eth29/1 30 50000 +Ethernet114 115,116 Eth29/2 30 50000 +Ethernet116 117,118 Eth30/1 31 50000 +Ethernet118 119,120 Eth30/2 31 50000 +Ethernet120 121,122 Eth31/1 32 50000 +Ethernet122 123,124 Eth31/2 32 50000 +Ethernet124 125,126 Eth32/1 32 50000 +Ethernet126 127,128 Eth32/2 32 50000 \ No newline at end of file diff --git a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/port_config.ini b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/port_config.ini index 3e2a0ebeafd5..bed33e9ed0f5 100644 --- a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/port_config.ini +++ b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/port_config.ini @@ -1,65 +1,65 @@ # name lanes alias index speed -Ethernet0 65,66 Eth1/1 0 50000 -Ethernet2 67,68 Eth1/2 0 50000 -Ethernet4 69,70 Eth2/1 1 50000 -Ethernet6 71,72 Eth2/2 1 50000 -Ethernet8 73,74 Eth3/1 2 50000 -Ethernet10 75,76 Eth3/2 2 50000 -Ethernet12 77,78 Eth4/1 3 50000 -Ethernet14 79,80 Eth4/2 3 50000 -Ethernet16 33,34 Eth5/1 4 50000 -Ethernet18 35,36 Eth5/2 4 50000 -Ethernet20 37,38 Eth6/1 5 50000 -Ethernet22 39,40 Eth6/2 5 50000 -Ethernet24 41,42 Eth7/1 6 50000 -Ethernet26 43,44 Eth7/2 6 50000 -Ethernet28 45,46 Eth8/1 7 50000 -Ethernet30 47,48 Eth8/2 7 50000 -Ethernet32 49,50 Eth9/1 8 50000 -Ethernet34 51,52 Eth9/2 8 50000 -Ethernet36 53,54 Eth10/1 9 50000 -Ethernet38 55,56 Eth10/2 9 50000 -Ethernet40 57,58 Eth11/1 10 50000 -Ethernet42 59,60 Eth11/2 10 50000 -Ethernet44 61,62 Eth12/1 11 50000 -Ethernet46 63,64 Eth12/2 11 50000 -Ethernet48 81,82 Eth13/1 12 50000 -Ethernet50 83,84 Eth13/2 12 50000 -Ethernet52 85,86 Eth14/1 13 50000 -Ethernet54 87,88 Eth14/2 13 50000 -Ethernet56 89,90 Eth15/1 14 50000 -Ethernet58 91,92 Eth15/2 14 50000 -Ethernet60 93,94 Eth16/1 15 50000 -Ethernet62 95,96 Eth16/2 15 50000 -Ethernet64 97,98 Eth17/1 16 50000 -Ethernet66 99,100 Eth17/2 16 50000 -Ethernet68 101,102 Eth18/1 17 50000 -Ethernet70 103,104 Eth18/2 17 50000 -Ethernet72 105,106 Eth19/1 18 50000 -Ethernet74 107,108 Eth19/2 18 50000 -Ethernet76 109,110 Eth20/1 19 50000 -Ethernet78 111,112 Eth20/2 19 50000 -Ethernet80 1,2 Eth21/1 20 50000 -Ethernet82 3,4 Eth21/2 20 50000 -Ethernet84 5,6 Eth22/1 21 50000 -Ethernet86 7,8 Eth22/2 21 50000 -Ethernet88 9,10 Eth23/1 22 50000 -Ethernet90 11,12 Eth23/2 22 50000 -Ethernet92 13,14 Eth24/1 23 50000 -Ethernet94 15,16 Eth24/2 23 50000 -Ethernet96 17,18 Eth25/1 24 50000 -Ethernet98 19,20 Eth25/2 24 50000 -Ethernet100 21,22 Eth26/1 25 50000 -Ethernet102 23,24 Eth26/2 25 50000 -Ethernet104 25,26 Eth27/1 26 50000 -Ethernet106 27,28 Eth27/2 26 50000 -Ethernet108 29,30 Eth28/1 27 50000 -Ethernet110 31,32 Eth28/2 27 50000 -Ethernet112 113,114 Eth29/1 28 50000 -Ethernet114 115,116 Eth29/2 28 50000 -Ethernet116 117,118 Eth30/1 29 50000 -Ethernet118 119,120 Eth30/2 29 50000 -Ethernet120 121,122 Eth31/1 30 50000 -Ethernet122 123,124 Eth31/2 30 50000 -Ethernet124 125,126 Eth32/1 31 50000 -Ethernet126 127,128 Eth32/2 31 50000 +Ethernet0 65,66 Eth1/1 1 50000 +Ethernet2 67,68 Eth1/2 1 50000 +Ethernet4 69,70 Eth2/1 2 50000 +Ethernet6 71,72 Eth2/2 2 50000 +Ethernet8 73,74 Eth3/1 3 50000 +Ethernet10 75,76 Eth3/2 3 50000 +Ethernet12 77,78 Eth4/1 4 50000 +Ethernet14 79,80 Eth4/2 4 50000 +Ethernet16 33,34 Eth5/1 5 50000 +Ethernet18 35,36 Eth5/2 5 50000 +Ethernet20 37,38 Eth6/1 6 50000 +Ethernet22 39,40 Eth6/2 6 50000 +Ethernet24 41,42 Eth7/1 7 50000 +Ethernet26 43,44 Eth7/2 7 50000 +Ethernet28 45,46 Eth8/1 8 50000 +Ethernet30 47,48 Eth8/2 8 50000 +Ethernet32 49,50 Eth9/1 9 50000 +Ethernet34 51,52 Eth9/2 9 50000 +Ethernet36 53,54 Eth10/1 10 50000 +Ethernet38 55,56 Eth10/2 10 50000 +Ethernet40 57,58 Eth11/1 11 50000 +Ethernet42 59,60 Eth11/2 11 50000 +Ethernet44 61,62 Eth12/1 12 50000 +Ethernet46 63,64 Eth12/2 12 50000 +Ethernet48 81,82 Eth13/1 13 50000 +Ethernet50 83,84 Eth13/2 13 50000 +Ethernet52 85,86 Eth14/1 14 50000 +Ethernet54 87,88 Eth14/2 14 50000 +Ethernet56 89,90 Eth15/1 15 50000 +Ethernet58 91,92 Eth15/2 15 50000 +Ethernet60 93,94 Eth16/1 16 50000 +Ethernet62 95,96 Eth16/2 16 50000 +Ethernet64 97,98 Eth17/1 17 50000 +Ethernet66 99,100 Eth17/2 17 50000 +Ethernet68 101,102 Eth18/1 18 50000 +Ethernet70 103,104 Eth18/2 18 50000 +Ethernet72 105,106 Eth19/1 19 50000 +Ethernet74 107,108 Eth19/2 19 50000 +Ethernet76 109,110 Eth20/1 20 50000 +Ethernet78 111,112 Eth20/2 20 50000 +Ethernet80 1,2 Eth21/1 21 50000 +Ethernet82 3,4 Eth21/2 21 50000 +Ethernet84 5,6 Eth22/1 22 50000 +Ethernet86 7,8 Eth22/2 22 50000 +Ethernet88 9,10 Eth23/1 23 50000 +Ethernet90 11,12 Eth23/2 23 50000 +Ethernet92 13,14 Eth24/1 24 50000 +Ethernet94 15,16 Eth24/2 24 50000 +Ethernet96 17,18 Eth25/1 25 50000 +Ethernet98 19,20 Eth25/2 25 50000 +Ethernet100 21,22 Eth26/1 26 50000 +Ethernet102 23,24 Eth26/2 26 50000 +Ethernet104 25,26 Eth27/1 27 50000 +Ethernet106 27,28 Eth27/2 27 50000 +Ethernet108 29,30 Eth28/1 28 50000 +Ethernet110 31,32 Eth28/2 28 50000 +Ethernet112 113,114 Eth29/1 29 50000 +Ethernet114 115,116 Eth29/2 29 50000 +Ethernet116 117,118 Eth30/1 30 50000 +Ethernet118 119,120 Eth30/2 30 50000 +Ethernet120 121,122 Eth31/1 31 50000 +Ethernet122 123,124 Eth31/2 31 50000 +Ethernet124 125,126 Eth32/1 32 50000 +Ethernet126 127,128 Eth32/2 32 50000 \ No newline at end of file diff --git a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/port_config.ini b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/port_config.ini index 94282c3379e4..91d2f91d41cc 100644 --- a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/port_config.ini +++ b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/port_config.ini @@ -1,33 +1,33 @@ # name lanes alias index speed -Ethernet0 65,66,67,68 Eth1 0 100000 -Ethernet4 69,70,71,72 Eth2 1 100000 -Ethernet8 73,74,75,76 Eth3 2 100000 -Ethernet12 77,78,79,80 Eth4 3 100000 -Ethernet16 33,34,35,36 Eth5 4 100000 -Ethernet20 37,38,39,40 Eth6 5 100000 -Ethernet24 41,42,43,44 Eth7 6 100000 -Ethernet28 45,46,47,48 Eth8 7 100000 -Ethernet32 49,50,51,52 Eth9 8 100000 -Ethernet36 53,54,55,56 Eth10 9 100000 -Ethernet40 57,58,59,60 Eth11 10 100000 -Ethernet44 61,62,63,64 Eth12 11 100000 -Ethernet48 81,82,83,84 Eth13 12 100000 -Ethernet52 85,86,87,88 Eth14 13 100000 -Ethernet56 89,90,91,92 Eth15 14 100000 -Ethernet60 93,94,95,96 Eth16 15 100000 -Ethernet64 97,98,99,100 Eth17 16 100000 -Ethernet68 101,102,103,104 Eth18 17 100000 -Ethernet72 105,106,107,108 Eth19 18 100000 -Ethernet76 109,110,111,112 Eth20 19 100000 -Ethernet80 1,2,3,4 Eth21 20 100000 -Ethernet84 5,6,7,8 Eth22 21 100000 -Ethernet88 9,10,11,12 Eth23 22 100000 -Ethernet92 13,14,15,16 Eth24 23 100000 -Ethernet96 17,18,19,20 Eth25 24 100000 -Ethernet100 21,22,23,24 Eth26 25 100000 -Ethernet104 25,26,27,28 Eth27 26 100000 -Ethernet108 29,30,31,32 Eth28 27 100000 -Ethernet112 113,114,115,116 Eth29 28 100000 -Ethernet116 117,118,119,120 Eth30 29 100000 -Ethernet120 121,122,123,124 Eth31 30 100000 -Ethernet124 125,126,127,128 Eth32 31 100000 +Ethernet0 65,66,67,68 Eth1 1 100000 +Ethernet4 69,70,71,72 Eth2 2 100000 +Ethernet8 73,74,75,76 Eth3 3 100000 +Ethernet12 77,78,79,80 Eth4 4 100000 +Ethernet16 33,34,35,36 Eth5 5 100000 +Ethernet20 37,38,39,40 Eth6 6 100000 +Ethernet24 41,42,43,44 Eth7 7 100000 +Ethernet28 45,46,47,48 Eth8 8 100000 +Ethernet32 49,50,51,52 Eth9 9 100000 +Ethernet36 53,54,55,56 Eth10 10 100000 +Ethernet40 57,58,59,60 Eth11 11 100000 +Ethernet44 61,62,63,64 Eth12 12 100000 +Ethernet48 81,82,83,84 Eth13 13 100000 +Ethernet52 85,86,87,88 Eth14 14 100000 +Ethernet56 89,90,91,92 Eth15 15 100000 +Ethernet60 93,94,95,96 Eth16 16 100000 +Ethernet64 97,98,99,100 Eth17 17 100000 +Ethernet68 101,102,103,104 Eth18 18 100000 +Ethernet72 105,106,107,108 Eth19 19 100000 +Ethernet76 109,110,111,112 Eth20 20 100000 +Ethernet80 1,2,3,4 Eth21 21 100000 +Ethernet84 5,6,7,8 Eth22 22 100000 +Ethernet88 9,10,11,12 Eth23 23 100000 +Ethernet92 13,14,15,16 Eth24 24 100000 +Ethernet96 17,18,19,20 Eth25 25 100000 +Ethernet100 21,22,23,24 Eth26 26 100000 +Ethernet104 25,26,27,28 Eth27 27 100000 +Ethernet108 29,30,31,32 Eth28 28 100000 +Ethernet112 113,114,115,116 Eth29 29 100000 +Ethernet116 117,118,119,120 Eth30 30 100000 +Ethernet120 121,122,123,124 Eth31 31 100000 +Ethernet124 125,126,127,128 Eth32 32 100000 \ No newline at end of file diff --git a/device/celestica/x86_64-cel_seastone-r0/plugins/sfputil.py b/device/celestica/x86_64-cel_seastone-r0/plugins/sfputil.py old mode 100755 new mode 100644 index f1e6b1daa3e1..c361659b0f17 --- a/device/celestica/x86_64-cel_seastone-r0/plugins/sfputil.py +++ b/device/celestica/x86_64-cel_seastone-r0/plugins/sfputil.py @@ -13,12 +13,11 @@ class SfpUtil(SfpUtilBase): """Platform-specific SfpUtil class""" - PORT_START = 0 - PORT_END = 31 + PORT_START = 1 + PORT_END = 32 PORTS_IN_BLOCK = 32 _port_to_eeprom_mapping = {} - qsfp_ports = range(0, PORTS_IN_BLOCK + 1) @property def port_start(self): @@ -30,7 +29,7 @@ def port_end(self): @property def qsfp_ports(self): - return range(0, self.PORTS_IN_BLOCK + 1) + return range(self.PORT_START, self.PORTS_IN_BLOCK + 1) @property def port_to_eeprom_mapping(self): @@ -41,7 +40,10 @@ def __init__(self): eeprom_path = '/sys/bus/i2c/devices/i2c-{0}/{0}-0050/eeprom' for x in range(self.PORT_START, self.PORT_END + 1): - self.port_to_eeprom_mapping[x] = eeprom_path.format( x + 26 ) + if self.port_start == 1: + self.port_to_eeprom_mapping[x] = eeprom_path.format((x - 1) + 26) + else: + self.port_to_eeprom_mapping[x] = eeprom_path.format(x + 26) SfpUtilBase.__init__(self) def get_presence(self, port_num): @@ -60,8 +62,14 @@ def get_presence(self, port_num): # content is a string containing the hex representation of the register reg_value = int(content, 16) + # Determind if port_num start from 1 or 0 + if self.port_start == 1: + bit_index = port_num - 1 + else: + bit_index = port_num + # Mask off the bit corresponding to our port - mask = (1 << port_num) + mask = (1 << bit_index) # ModPrsL is active low if reg_value & mask == 0: @@ -85,8 +93,14 @@ def get_low_power_mode(self, port_num): # content is a string containing the hex representation of the register reg_value = int(content, 16) + # Determind if port_num start from 1 or 0 + if self.port_start == 1: + bit_index = port_num - 1 + else: + bit_index = port_num + # Mask off the bit corresponding to our port - mask = (1 << port_num) + mask = (1 << bit_index) # LPMode is active high if reg_value & mask == 0: @@ -95,8 +109,96 @@ def get_low_power_mode(self, port_num): return True def set_low_power_mode(self, port_num, lpmode): - raise NotImplementedError + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + try: + reg_file = open("/sys/devices/platform/dx010_cpld/qsfp_lpmode", "r+") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = reg_file.readline().rstrip() + + # content is a string containing the hex representation of the register + reg_value = int(content, 16) + + # Determind if port_num start from 1 or 0 + if self.port_start == 1: + bit_index = port_num - 1 + else: + bit_index = port_num + + # Mask off the bit corresponding to our port + mask = (1 << bit_index) + + # LPMode is active high; set or clear the bit accordingly + if lpmode is True: + reg_value = reg_value | mask + else: + reg_value = reg_value & ~mask + + # Convert our register value back to a hex string and write back + content = hex(reg_value).strip('L') + + reg_file.seek(0) + reg_file.write(content) + reg_file.close() + + return True def reset(self, port_num): - raise NotImplementedError + # Check for invalid port_num + if port_num < self.port_start or port_num > self.port_end: + return False + + try: + reg_file = open("/sys/devices/platform/dx010_cpld/qsfp_reset", "r+") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + content = reg_file.readline().rstrip() + + # File content is a string containing the hex representation of the + # register + reg_value = int(content, 16) + + # Determind if port_num start from 1 or 0 + if self.port_start == 1: + bit_index = port_num - 1 + else: + bit_index = port_num + + # Mask off the bit corresponding to our port + mask = (1 << bit_index) + + # ResetL is active low + reg_value = reg_value & ~mask + + # Convert our register value back to a hex string and write back + reg_file.seek(0) + reg_file.write(hex(reg_value).rstrip('L')) + reg_file.close() + + # Sleep 1 second to allow it to settle + time.sleep(1) + # Flip the bit back high and write back to the register to take port + # out of reset + try: + reg_file = open("/sys/devices/platform/dx010_cpld/qsfp_reset", "w") + except IOError as e: + print "Error: unable to open file: %s" % str(e) + return False + + reg_value = reg_value | mask + reg_file.seek(0) + reg_file.write(hex(reg_value).rstrip('L')) + reg_file.close() + + return True + + def get_transceiver_change_event(self, timeout=0): + raise NotImplementedError From 986a857cd952a43cd0b17b012fdca1fbd10e7a8f Mon Sep 17 00:00:00 2001 From: Volodymyr Samotiy Date: Fri, 17 Aug 2018 01:53:43 +0300 Subject: [PATCH 154/180] [mellanox]: Fix problem with system EEPROM in "hw-mgmt" (#1938) Signed-off-by: Volodymyr Samotiy --- .../Add-modprobe-config-for-at24-module.patch | 21 +++++++++++++++++++ .../Add-systemd-service-config.patch | 3 +-- 2 files changed, 22 insertions(+), 2 deletions(-) create mode 100644 platform/mellanox/hw-management/Add-modprobe-config-for-at24-module.patch diff --git a/platform/mellanox/hw-management/Add-modprobe-config-for-at24-module.patch b/platform/mellanox/hw-management/Add-modprobe-config-for-at24-module.patch new file mode 100644 index 000000000000..37d57da4e937 --- /dev/null +++ b/platform/mellanox/hw-management/Add-modprobe-config-for-at24-module.patch @@ -0,0 +1,21 @@ +From 2f70f5df445820fb86e3bd7f95707e0fb97b553f Mon Sep 17 00:00:00 2001 +From: Volodymyr Samotiy +Date: Thu, 16 Aug 2018 17:21:37 +0300 +Subject: Add modprobe config for "at24" module + +Signed-off-by: Volodymyr Samotiy +--- + usr/etc/modprobe.d/mellanox-system-whitelist.conf | 1 + + 1 file changed, 1 insertion(+) + create mode 100644 usr/etc/modprobe.d/mellanox-system-whitelist.conf + +diff --git a/usr/etc/modprobe.d/mellanox-system-whitelist.conf b/usr/etc/modprobe.d/mellanox-system-whitelist.conf +new file mode 100644 +index 0000000..a3eef57 +--- /dev/null ++++ b/usr/etc/modprobe.d/mellanox-system-whitelist.conf +@@ -0,0 +1 @@ ++options at24 io_limit=32 +-- +1.9.1 + diff --git a/platform/mellanox/hw-management/Add-systemd-service-config.patch b/platform/mellanox/hw-management/Add-systemd-service-config.patch index bef62b9ea3e7..ce16bb712ee1 100644 --- a/platform/mellanox/hw-management/Add-systemd-service-config.patch +++ b/platform/mellanox/hw-management/Add-systemd-service-config.patch @@ -29,7 +29,7 @@ new file mode 100644 index 0000000..d18916d --- /dev/null +++ b/debian/hw-management.service -@@ -0,0 +1,11 @@ +@@ -0,0 +1,10 @@ +[Unit] +Description=Mellanox Hardware Management + @@ -37,7 +37,6 @@ index 0000000..d18916d +Type=oneshot +EnvironmentFile=/host/machine.conf +ExecStart=/bin/bash -c "/etc/mlnx/mlnx-hw-management start" -+ExecStop=/bin/bash -c "/etc/mlnx/mlnx-hw-management stop" + +[Install] +WantedBy=multi-user.target From a8ccf589c91cdc6d107d5244740a2ea9c0329872 Mon Sep 17 00:00:00 2001 From: Ying Xie Date: Thu, 16 Aug 2018 15:54:31 -0700 Subject: [PATCH 155/180] [build]: Makefile: make new step "make stretch" optional (#1936) * [makefile] Rename Makefile to Makefile.work Signed-off-by: Ying Xie * [makefile] Add new make file to avoid extra step * avoiding calling "make stretch" Signed-off-by: Ying Xie * [makefile] allow skipping "make stretch" Signed-off-by: Ying Xie * [makefile] add all PHONY targets to pass through list Signed-off-by: Ying Xie --- Makefile | 155 +++++--------------------------------------------- Makefile.work | 147 +++++++++++++++++++++++++++++++++++++++++++++++ README.md | 2 +- 3 files changed, 162 insertions(+), 142 deletions(-) create mode 100644 Makefile.work diff --git a/Makefile b/Makefile index 2dfab3274869..4bc42cd3728c 100644 --- a/Makefile +++ b/Makefile @@ -1,147 +1,20 @@ -############################################################################### -## Wrapper for starting make inside sonic-slave container -# -# Supported parameters: -# -# * PLATFORM: Specific platform we wish to build images for. -# * BUILD_NUMBER: Desired version-number to pass to the building-system. -# * ENABLE_DHCP_GRAPH_SERVICE: Enables get-graph service to fetch minigraph files -# through http. -# * SHUTDOWN_BGP_ON_START: Sets admin-down state for all bgp peerings after restart. -# * ENABLE_PFCWD_ON_START: Enable PFC Watchdog (PFCWD) on server-facing ports -# * by default for TOR switch. -# * SONIC_ENABLE_SYNCD_RPC: Enables rpc-based syncd builds. -# * USERNAME: Desired username -- default at rules/config -# * PASSWORD: Desired password -- default at rules/config -# * KEEP_SLAVE_ON: Keeps slave container up after building-process concludes. -# * SOURCE_FOLDER: host path to be mount as /var/$(USER)/src, only effective when KEEP_SLAVE_ON=yes -# * SONIC_BUILD_JOBS: Specifying number of concurrent build job(s) to run -# * KERNEL_PROCURE_METHOD: Specifying method of obtaining kernel Debian package: download or build -# -############################################################################### +# SONiC make file -SHELL = /bin/bash - -USER := $(shell id -un) -PWD := $(shell pwd) - -ifeq ($(USER), root) -$(error Add your user account to docker group and use your user account to make. root or sudo are not supported!) -endif - -# Remove lock file in case previous run was forcefully stopped -$(shell rm -f .screen) - -MAKEFLAGS += -B - -ifeq ($(BLDENV), stretch) -SLAVE_BASE_TAG = $(shell sha1sum sonic-slave-stretch/Dockerfile | awk '{print substr($$1,0,11);}') -SLAVE_TAG = $(shell cat sonic-slave-stretch/Dockerfile.user sonic-slave-stretch/Dockerfile | sha1sum | awk '{print substr($$1,0,11);}') -SLAVE_BASE_IMAGE = sonic-slave-stretch-base -SLAVE_IMAGE = sonic-slave-stretch-$(USER) -SLAVE_DIR = sonic-slave-stretch -else -SLAVE_BASE_TAG = $(shell sha1sum sonic-slave/Dockerfile | awk '{print substr($$1,0,11);}') -SLAVE_TAG = $(shell cat sonic-slave/Dockerfile.user sonic-slave/Dockerfile | sha1sum | awk '{print substr($$1,0,11);}') -SLAVE_BASE_IMAGE = sonic-slave-base -SLAVE_IMAGE = sonic-slave-$(USER) -SLAVE_DIR = sonic-slave -endif - -INSMOD_OVERLAY := sudo modprobe overlay -DOCKER_RUN := docker run --rm=true --privileged \ - -v $(PWD):/sonic \ - -w /sonic \ - -e "http_proxy=$(http_proxy)" \ - -e "https_proxy=$(https_proxy)" \ - -i$(if $(TERM),t,) - -DOCKER_BASE_BUILD = docker build --no-cache \ - -t $(SLAVE_BASE_IMAGE) \ - --build-arg http_proxy=$(http_proxy) \ - --build-arg https_proxy=$(https_proxy) \ - $(SLAVE_DIR) && \ - docker tag $(SLAVE_BASE_IMAGE):latest $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) - -DOCKER_BUILD = docker build --no-cache \ - --build-arg user=$(USER) \ - --build-arg uid=$(shell id -u) \ - --build-arg guid=$(shell id -g) \ - --build-arg hostname=$(shell echo $$HOSTNAME) \ - -t $(SLAVE_IMAGE) \ - -f $(SLAVE_DIR)/Dockerfile.user \ - $(SLAVE_DIR) && \ - docker tag $(SLAVE_IMAGE):latest $(SLAVE_IMAGE):$(SLAVE_TAG) - -SONIC_BUILD_INSTRUCTION := make \ - -f slave.mk \ - PLATFORM=$(PLATFORM) \ - BUILD_NUMBER=$(BUILD_NUMBER) \ - ENABLE_DHCP_GRAPH_SERVICE=$(ENABLE_DHCP_GRAPH_SERVICE) \ - SHUTDOWN_BGP_ON_START=$(SHUTDOWN_BGP_ON_START) \ - SONIC_ENABLE_PFCWD_ON_START=$(ENABLE_PFCWD_ON_START) \ - ENABLE_SYNCD_RPC=$(ENABLE_SYNCD_RPC) \ - PASSWORD=$(PASSWORD) \ - USERNAME=$(USERNAME) \ - SONIC_BUILD_JOBS=$(SONIC_BUILD_JOBS) \ - KERNEL_PROCURE_METHOD=$(KERNEL_PROCURE_METHOD) \ - HTTP_PROXY=$(http_proxy) \ - HTTPS_PROXY=$(https_proxy) \ - SONIC_ENABLE_SYSTEM_TELEMETRY=$(ENABLE_SYSTEM_TELEMETRY) - -.PHONY: sonic-slave-build sonic-slave-bash init reset - -.DEFAULT_GOAL := all +NOSTRETCH ?= 0 %:: - @docker inspect --type image $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) &> /dev/null || \ - { echo Image $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) not found. Building... ; \ - $(DOCKER_BASE_BUILD) ; } - @docker inspect --type image $(SLAVE_IMAGE):$(SLAVE_TAG) &> /dev/null || \ - { echo Image $(SLAVE_IMAGE):$(SLAVE_TAG) not found. Building... ; \ - $(DOCKER_BUILD) ; } - @$(INSMOD_OVERLAY) -ifeq "$(KEEP_SLAVE_ON)" "yes" - ifdef SOURCE_FOLDER - @$(DOCKER_RUN) -v $(SOURCE_FOLDER):/var/$(USER)/src $(SLAVE_IMAGE):$(SLAVE_TAG) bash -c "$(SONIC_BUILD_INSTRUCTION) $@; /bin/bash" - else - @$(DOCKER_RUN) $(SLAVE_IMAGE):$(SLAVE_TAG) bash -c "$(SONIC_BUILD_INSTRUCTION) $@; /bin/bash" - endif -else - @$(DOCKER_RUN) $(SLAVE_IMAGE):$(SLAVE_TAG) $(SONIC_BUILD_INSTRUCTION) $@ + @echo "+++ --- Making $@ --- +++" +ifeq ($(NOSTRETCH), 0) + BLDENV=stretch make -f Makefile.work stretch endif + make -f Makefile.work $@ -sonic-slave-build : - $(DOCKER_BASE_BUILD) - $(DOCKER_BUILD) - -sonic-slave-bash : - @docker inspect --type image $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) &> /dev/null || \ - { echo Image $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) not found. Building... ; \ - $(DOCKER_BASE_BUILD) ; } - @docker inspect --type image $(SLAVE_IMAGE):$(SLAVE_TAG) &> /dev/null || \ - { echo Image $(SLAVE_IMAGE):$(SLAVE_TAG) not found. Building... ; \ - $(DOCKER_BUILD) ; } - @$(INSMOD_OVERLAY) - @$(DOCKER_RUN) -t $(SLAVE_IMAGE):$(SLAVE_TAG) bash - -showtag: - @echo $(SLAVE_IMAGE):$(SLAVE_TAG) - @echo $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) - -init : - @git submodule update --init --recursive - @git submodule foreach --recursive '[ -f .git ] && echo "gitdir: $$(realpath --relative-to=. $$(cut -d" " -f2 .git))" > .git' +stretch: + @echo "+++ Making $@ +++" +ifeq ($(NOSTRETCH), 0) + BLDENV=stretch make -f Makefile.work stretch +endif -reset : - @echo && echo -n "Warning! All local changes will be lost. Proceed? [y/N]: " - @read ans && \ - if [ $$ans == y ]; then \ - git clean -xfdf; \ - git reset --hard; \ - git submodule foreach --recursive git clean -xfdf; \ - git submodule foreach --recursive git reset --hard; \ - git submodule update --init --recursive;\ - else \ - echo "Reset aborted"; \ - fi +clean reset init configure showtag sonic-slave-build sonic-slave-bash : + @echo "+++ Making $@ +++" + make -f Makefile.work $@ diff --git a/Makefile.work b/Makefile.work new file mode 100644 index 000000000000..2dfab3274869 --- /dev/null +++ b/Makefile.work @@ -0,0 +1,147 @@ +############################################################################### +## Wrapper for starting make inside sonic-slave container +# +# Supported parameters: +# +# * PLATFORM: Specific platform we wish to build images for. +# * BUILD_NUMBER: Desired version-number to pass to the building-system. +# * ENABLE_DHCP_GRAPH_SERVICE: Enables get-graph service to fetch minigraph files +# through http. +# * SHUTDOWN_BGP_ON_START: Sets admin-down state for all bgp peerings after restart. +# * ENABLE_PFCWD_ON_START: Enable PFC Watchdog (PFCWD) on server-facing ports +# * by default for TOR switch. +# * SONIC_ENABLE_SYNCD_RPC: Enables rpc-based syncd builds. +# * USERNAME: Desired username -- default at rules/config +# * PASSWORD: Desired password -- default at rules/config +# * KEEP_SLAVE_ON: Keeps slave container up after building-process concludes. +# * SOURCE_FOLDER: host path to be mount as /var/$(USER)/src, only effective when KEEP_SLAVE_ON=yes +# * SONIC_BUILD_JOBS: Specifying number of concurrent build job(s) to run +# * KERNEL_PROCURE_METHOD: Specifying method of obtaining kernel Debian package: download or build +# +############################################################################### + +SHELL = /bin/bash + +USER := $(shell id -un) +PWD := $(shell pwd) + +ifeq ($(USER), root) +$(error Add your user account to docker group and use your user account to make. root or sudo are not supported!) +endif + +# Remove lock file in case previous run was forcefully stopped +$(shell rm -f .screen) + +MAKEFLAGS += -B + +ifeq ($(BLDENV), stretch) +SLAVE_BASE_TAG = $(shell sha1sum sonic-slave-stretch/Dockerfile | awk '{print substr($$1,0,11);}') +SLAVE_TAG = $(shell cat sonic-slave-stretch/Dockerfile.user sonic-slave-stretch/Dockerfile | sha1sum | awk '{print substr($$1,0,11);}') +SLAVE_BASE_IMAGE = sonic-slave-stretch-base +SLAVE_IMAGE = sonic-slave-stretch-$(USER) +SLAVE_DIR = sonic-slave-stretch +else +SLAVE_BASE_TAG = $(shell sha1sum sonic-slave/Dockerfile | awk '{print substr($$1,0,11);}') +SLAVE_TAG = $(shell cat sonic-slave/Dockerfile.user sonic-slave/Dockerfile | sha1sum | awk '{print substr($$1,0,11);}') +SLAVE_BASE_IMAGE = sonic-slave-base +SLAVE_IMAGE = sonic-slave-$(USER) +SLAVE_DIR = sonic-slave +endif + +INSMOD_OVERLAY := sudo modprobe overlay +DOCKER_RUN := docker run --rm=true --privileged \ + -v $(PWD):/sonic \ + -w /sonic \ + -e "http_proxy=$(http_proxy)" \ + -e "https_proxy=$(https_proxy)" \ + -i$(if $(TERM),t,) + +DOCKER_BASE_BUILD = docker build --no-cache \ + -t $(SLAVE_BASE_IMAGE) \ + --build-arg http_proxy=$(http_proxy) \ + --build-arg https_proxy=$(https_proxy) \ + $(SLAVE_DIR) && \ + docker tag $(SLAVE_BASE_IMAGE):latest $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) + +DOCKER_BUILD = docker build --no-cache \ + --build-arg user=$(USER) \ + --build-arg uid=$(shell id -u) \ + --build-arg guid=$(shell id -g) \ + --build-arg hostname=$(shell echo $$HOSTNAME) \ + -t $(SLAVE_IMAGE) \ + -f $(SLAVE_DIR)/Dockerfile.user \ + $(SLAVE_DIR) && \ + docker tag $(SLAVE_IMAGE):latest $(SLAVE_IMAGE):$(SLAVE_TAG) + +SONIC_BUILD_INSTRUCTION := make \ + -f slave.mk \ + PLATFORM=$(PLATFORM) \ + BUILD_NUMBER=$(BUILD_NUMBER) \ + ENABLE_DHCP_GRAPH_SERVICE=$(ENABLE_DHCP_GRAPH_SERVICE) \ + SHUTDOWN_BGP_ON_START=$(SHUTDOWN_BGP_ON_START) \ + SONIC_ENABLE_PFCWD_ON_START=$(ENABLE_PFCWD_ON_START) \ + ENABLE_SYNCD_RPC=$(ENABLE_SYNCD_RPC) \ + PASSWORD=$(PASSWORD) \ + USERNAME=$(USERNAME) \ + SONIC_BUILD_JOBS=$(SONIC_BUILD_JOBS) \ + KERNEL_PROCURE_METHOD=$(KERNEL_PROCURE_METHOD) \ + HTTP_PROXY=$(http_proxy) \ + HTTPS_PROXY=$(https_proxy) \ + SONIC_ENABLE_SYSTEM_TELEMETRY=$(ENABLE_SYSTEM_TELEMETRY) + +.PHONY: sonic-slave-build sonic-slave-bash init reset + +.DEFAULT_GOAL := all + +%:: + @docker inspect --type image $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) &> /dev/null || \ + { echo Image $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) not found. Building... ; \ + $(DOCKER_BASE_BUILD) ; } + @docker inspect --type image $(SLAVE_IMAGE):$(SLAVE_TAG) &> /dev/null || \ + { echo Image $(SLAVE_IMAGE):$(SLAVE_TAG) not found. Building... ; \ + $(DOCKER_BUILD) ; } + @$(INSMOD_OVERLAY) +ifeq "$(KEEP_SLAVE_ON)" "yes" + ifdef SOURCE_FOLDER + @$(DOCKER_RUN) -v $(SOURCE_FOLDER):/var/$(USER)/src $(SLAVE_IMAGE):$(SLAVE_TAG) bash -c "$(SONIC_BUILD_INSTRUCTION) $@; /bin/bash" + else + @$(DOCKER_RUN) $(SLAVE_IMAGE):$(SLAVE_TAG) bash -c "$(SONIC_BUILD_INSTRUCTION) $@; /bin/bash" + endif +else + @$(DOCKER_RUN) $(SLAVE_IMAGE):$(SLAVE_TAG) $(SONIC_BUILD_INSTRUCTION) $@ +endif + +sonic-slave-build : + $(DOCKER_BASE_BUILD) + $(DOCKER_BUILD) + +sonic-slave-bash : + @docker inspect --type image $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) &> /dev/null || \ + { echo Image $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) not found. Building... ; \ + $(DOCKER_BASE_BUILD) ; } + @docker inspect --type image $(SLAVE_IMAGE):$(SLAVE_TAG) &> /dev/null || \ + { echo Image $(SLAVE_IMAGE):$(SLAVE_TAG) not found. Building... ; \ + $(DOCKER_BUILD) ; } + @$(INSMOD_OVERLAY) + @$(DOCKER_RUN) -t $(SLAVE_IMAGE):$(SLAVE_TAG) bash + +showtag: + @echo $(SLAVE_IMAGE):$(SLAVE_TAG) + @echo $(SLAVE_BASE_IMAGE):$(SLAVE_BASE_TAG) + +init : + @git submodule update --init --recursive + @git submodule foreach --recursive '[ -f .git ] && echo "gitdir: $$(realpath --relative-to=. $$(cut -d" " -f2 .git))" > .git' + +reset : + @echo && echo -n "Warning! All local changes will be lost. Proceed? [y/N]: " + @read ans && \ + if [ $$ans == y ]; then \ + git clean -xfdf; \ + git reset --hard; \ + git submodule foreach --recursive git clean -xfdf; \ + git submodule foreach --recursive git reset --hard; \ + git submodule update --init --recursive;\ + else \ + echo "Reset aborted"; \ + fi diff --git a/README.md b/README.md index e09c4e2c2801..9b667661cd82 100644 --- a/README.md +++ b/README.md @@ -58,7 +58,7 @@ To build SONiC installer image and docker images, run the following commands: # Execute make configure once to configure ASIC make configure PLATFORM=[ASIC_VENDOR] - # build debian stretch required targets + # build debian stretch required targets (optional) BLDENV=stretch make stretch # build SONiC image From 86205b858a56bd4525f4e2f7992aebc048cf1074 Mon Sep 17 00:00:00 2001 From: Wenda Ni Date: Thu, 16 Aug 2018 23:11:20 -0700 Subject: [PATCH 156/180] [devices/a7050]: Separate ECN/WRED profile per queue to maintain a consistent view among CONFIG_DB get commands (#1941) for ecn on/off operations, which are conducted at per queue all interfaces granularity. TODO: Ideally, we should have ECN/WRED profile applied at per interface per queue granularity, and we should do it for all hwskus under the device directory, not just 7050. Signed-off-by: Wenda Ni --- .../x86_64-arista_7050_qx32/Arista-7050-QX32/qos.json.j2 | 7 ++++++- .../Arista-7050-QX-32S/qos.json.j2 | 7 ++++++- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/qos.json.j2 b/device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/qos.json.j2 index 926911ab59d0..698811c610ff 100644 --- a/device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/qos.json.j2 +++ b/device/arista/x86_64-arista_7050_qx32/Arista-7050-QX32/qos.json.j2 @@ -130,7 +130,12 @@ }, "QUEUE": { "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|3-4" : { - "scheduler" : "[SCHEDULER|scheduler.0]", + "scheduler" : "[SCHEDULER|scheduler.0]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|3" : { + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|4" : { "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" }, "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0" : { diff --git a/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/qos.json.j2 b/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/qos.json.j2 index 926911ab59d0..698811c610ff 100644 --- a/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/qos.json.j2 +++ b/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/qos.json.j2 @@ -130,7 +130,12 @@ }, "QUEUE": { "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|3-4" : { - "scheduler" : "[SCHEDULER|scheduler.0]", + "scheduler" : "[SCHEDULER|scheduler.0]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|3" : { + "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" + }, + "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|4" : { "wred_profile" : "[WRED_PROFILE|AZURE_LOSSLESS]" }, "Ethernet0,Ethernet4,Ethernet8,Ethernet12,Ethernet16,Ethernet20,Ethernet24,Ethernet28,Ethernet32,Ethernet36,Ethernet40,Ethernet44,Ethernet48,Ethernet52,Ethernet56,Ethernet60,Ethernet64,Ethernet68,Ethernet72,Ethernet76,Ethernet80,Ethernet84,Ethernet88,Ethernet92,Ethernet96,Ethernet100,Ethernet104,Ethernet108,Ethernet112,Ethernet116,Ethernet120,Ethernet124|0" : { From ec8a7f5e54467b3764527e256de6ca57a1ce2280 Mon Sep 17 00:00:00 2001 From: lguohan Date: Thu, 16 Aug 2018 23:11:45 -0700 Subject: [PATCH 157/180] [broadcom]: fix delay to load led proc init (#1940) led start bcm cmd triggers link state notifications. This is quick fix to avoid such fake link state notifications. Signed-off-by: Guohan Lu --- platform/broadcom/docker-syncd-brcm/start.sh | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/platform/broadcom/docker-syncd-brcm/start.sh b/platform/broadcom/docker-syncd-brcm/start.sh index cc0a0948e9aa..c52e5cb20271 100755 --- a/platform/broadcom/docker-syncd-brcm/start.sh +++ b/platform/broadcom/docker-syncd-brcm/start.sh @@ -29,11 +29,13 @@ wait_syncd() { fi sleep 1 done + + # wait until bcm sdk is ready to get a request + sleep 3 } # If this platform has an initialization file for the Broadcom LED microprocessor, load it if [ -r ${PLATFORM_DIR}/led_proc_init.soc ]; then wait_syncd - sleep 60 # wait until bcm sdk is ready to get a request supervisorctl start ledinit fi From 5a17a04c82b8d8a9e2c5fef96f586bee99601b68 Mon Sep 17 00:00:00 2001 From: Kebo Liu Date: Fri, 17 Aug 2018 14:12:00 +0800 Subject: [PATCH 158/180] [mlnx-platform] enhancement for xcvrd implementation on mlnx platform (#1937) * mlnx enhancement for xcvrd implementation * fix conflict --- .../x86_64-mlnx_msn2100-r0/plugins/sfputil.py | 7 ++ .../x86_64-mlnx_msn2410-r0/plugins/sfputil.py | 9 +- .../x86_64-mlnx_msn2700-r0/plugins/sfputil.py | 7 ++ .../x86_64-mlnx_msn2740-r0/plugins/sfputil.py | 7 ++ platform/mellanox/mlnx-sfpd/scripts/mlnx-sfpd | 109 +++++++++++++----- 5 files changed, 106 insertions(+), 33 deletions(-) diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py index 631a6b774fb3..a4eda6edfe39 100644 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py +++ b/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/sfputil.py @@ -30,6 +30,7 @@ class SfpUtil(SfpUtilBase): db_sel_object = None db_sel_tbl = None state_db = None + sfpd_status_tbl = None @property def port_start(self): @@ -176,6 +177,12 @@ def get_transceiver_change_event(self, timeout=0): self.db_sel.addSelectable(self.db_sel_tbl) self.db_sel_timeout = swsscommon.Select.TIMEOUT self.db_sel_object = swsscommon.Select.OBJECT + self.sfpd_status_tbl = swsscommon.Table(self.state_db, 'MLNX_SFPD_TASK') + + # Check the liveness of mlnx-sfpd, if it failed, return false + keys = self.sfpd_status_tbl.getKeys() + if 'LIVENESS' not in keys: + return False, phy_port_dict (state, c) = self.db_sel.select(timeout) if state == self.db_sel_timeout: diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py index c379155b82e7..8bd4ba789168 100644 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py +++ b/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/sfputil.py @@ -30,6 +30,7 @@ class SfpUtil(SfpUtilBase): db_sel_object = None db_sel_tbl = None state_db = None + sfpd_status_tbl = None @property def port_start(self): @@ -48,7 +49,7 @@ def port_to_eeprom_mapping(self): return self._port_to_eeprom_mapping def __init__(self): - eeprom_path = "/sys/class/i2c-adapter/i2c-2/2-0048/hwmon/hwmon6/qsfp{0}_eeprom" + eeprom_path = "/sys/class/i2c-adapter/i2c-2/2-0048/hwmon/hwmon7/qsfp{0}_eeprom" for x in range(0, self.port_end + 1): self._port_to_eeprom_mapping[x] = eeprom_path.format(x + self.EEPROM_OFFSET) @@ -177,6 +178,12 @@ def get_transceiver_change_event(self, timeout=0): self.db_sel.addSelectable(self.db_sel_tbl) self.db_sel_timeout = swsscommon.Select.TIMEOUT self.db_sel_object = swsscommon.Select.OBJECT + self.sfpd_status_tbl = swsscommon.Table(self.state_db, 'MLNX_SFPD_TASK') + + # Check the liveness of mlnx-sfpd, if it failed, return false + keys = self.sfpd_status_tbl.getKeys() + if 'LIVENESS' not in keys: + return False, phy_port_dict (state, c) = self.db_sel.select(timeout) if state == self.db_sel_timeout: diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py index 2eb3d628ff9f..11a5bdcb02b6 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/sfputil.py @@ -30,6 +30,7 @@ class SfpUtil(SfpUtilBase): db_sel_object = None db_sel_tbl = None state_db = None + sfpd_status_tbl = None @property def port_start(self): @@ -176,6 +177,12 @@ def get_transceiver_change_event(self, timeout=0): self.db_sel.addSelectable(self.db_sel_tbl) self.db_sel_timeout = swsscommon.Select.TIMEOUT self.db_sel_object = swsscommon.Select.OBJECT + self.sfpd_status_tbl = swsscommon.Table(self.state_db, 'MLNX_SFPD_TASK') + + # Check the liveness of mlnx-sfpd, if it failed, return false + keys = self.sfpd_status_tbl.getKeys() + if 'LIVENESS' not in keys: + return False, phy_port_dict (state, c) = self.db_sel.select(timeout) if state == self.db_sel_timeout: diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py b/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py index d617135e3e89..f84cefc67268 100644 --- a/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py +++ b/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/sfputil.py @@ -30,6 +30,7 @@ class SfpUtil(SfpUtilBase): db_sel_object = None db_sel_tbl = None state_db = None + sfpd_status_tbl = None @property def port_start(self): @@ -176,6 +177,12 @@ def get_transceiver_change_event(self, timeout=0): self.db_sel.addSelectable(self.db_sel_tbl) self.db_sel_timeout = swsscommon.Select.TIMEOUT self.db_sel_object = swsscommon.Select.OBJECT + self.sfpd_status_tbl = swsscommon.Table(self.state_db, 'MLNX_SFPD_TASK') + + # Check the liveness of mlnx-sfpd, if it failed, return false + keys = self.sfpd_status_tbl.getKeys() + if 'LIVENESS' not in keys: + return False, phy_port_dict (state, c) = self.db_sel.select(timeout) if state == self.db_sel_timeout: diff --git a/platform/mellanox/mlnx-sfpd/scripts/mlnx-sfpd b/platform/mellanox/mlnx-sfpd/scripts/mlnx-sfpd index e91dbb7a8aa6..a1d2e6d9c3b5 100644 --- a/platform/mellanox/mlnx-sfpd/scripts/mlnx-sfpd +++ b/platform/mellanox/mlnx-sfpd/scripts/mlnx-sfpd @@ -11,6 +11,7 @@ import time import syslog import signal import json +import threading from python_sdk_api.sx_api import * from swsssdk import SonicV2Connector @@ -26,10 +27,11 @@ STATUS_PLUGIN = '1' STATUS_PLUGOUT = '0' STATUS_UNKNOWN = '2' -sfp_value_status_dict = {SDK_SFP_STATE_IN:STATUS_PLUGIN, SDK_SFP_STATE_OUT:STATUS_PLUGOUT} +SFPD_LIVENESS_UPDATE_INTERVAL_SECS = 30 -#========================== Syslog wrappers ========================== +sfp_value_status_dict = {SDK_SFP_STATE_IN:STATUS_PLUGIN, SDK_SFP_STATE_OUT:STATUS_PLUGOUT} +# ========================== Syslog wrappers ========================== def log_info(msg, also_print_to_console=False): syslog.openlog(SYSLOG_IDENTIFIER) syslog.syslog(syslog.LOG_INFO, msg) @@ -54,8 +56,7 @@ def log_error(msg, also_print_to_console=False): if also_print_to_console: print(msg) -#========================== Signal Handling ========================== - +# ========================== Signal Handling ========================== def signal_handler(sig, frame): if sig == signal.SIGHUP: log_info("Caught SIGHUP - ignoring...") @@ -83,11 +84,14 @@ def sx_recv(fd_p, handle): port_cnt_p = new_uint32_t_p() uint32_t_p_assign(port_cnt_p,64) label_port_list = [] + status = True + module_state = 0 rc = sx_lib_host_ifc_recv(fd_p, pkt, pkt_size_p, recv_info_p) if rc != 0: log_error("event receive exit with error, rc %d" % rc) - exit(rc) + status = False + return status, label_port_list, module_state pmpe_t = recv_info_p.event_info.pmpe port_list_size = pmpe_t.list_size @@ -99,21 +103,50 @@ def sx_recv(fd_p, handle): rc = sx_api_port_device_get(handle, 1 , 0, port_attributes_list, port_cnt_p) port_cnt = uint32_t_p_value(port_cnt_p) - for i in range(0,port_cnt): + for i in range(0, port_cnt): port_attributes = sx_port_attributes_t_arr_getitem(port_attributes_list,i) if port_attributes.log_port == logical_port: lable_port = port_attributes.port_mapping.module_port break label_port_list.append(lable_port) - return label_port_list, module_state + return status, label_port_list, module_state, def send_sfp_notification(db, interface, state): - sfp_notify = [interface,state] - msg = json.dumps(sfp_notify,separators=(',',':')) - db.publish('STATE_DB','TRANSCEIVER_NOTIFY', msg) + sfp_notify = [interface, state] + msg = json.dumps(sfp_notify, separators=(',', ':')) + db.publish('STATE_DB', 'TRANSCEIVER_NOTIFY', msg) return +def update_sfpd_liveness_key(db, timeout_secs): + if db.exists('STATE_DB', 'MLNX_SFPD_TASK|LIVENESS'): + db.expire('STATE_DB', 'MLNX_SFPD_TASK|LIVENESS', timeout_secs) + else: + db.set('STATE_DB', 'MLNX_SFPD_TASK|LIVENESS', 'value', 'ok') + db.expire('STATE_DB', 'MLNX_SFPD_TASK|LIVENESS', timeout_secs) + +# Timer thread wrapper class to update mlnx-sfpd liveness info to DB periodically +class sfpd_liveness_update_task: + def __init__(self, db): + self.task_stopping_event = threading.Event() + self.task_timer = None + self.state_db = db + + def task_run(self): + if self.task_stopping_event.isSet(): + log_error("Error: sfpd liveness update thread received stop event, exiting...") + return + + update_sfpd_liveness_key(self.state_db, 2*SFPD_LIVENESS_UPDATE_INTERVAL_SECS) + + self.task_timer = threading.Timer(SFPD_LIVENESS_UPDATE_INTERVAL_SECS, self.task_run) + self.task_timer.start() + + def task_stop(self): + self.task_stopping_event.set() + self.task_timer.join() + + # main start def main(): # Register our signal handlers @@ -121,26 +154,30 @@ def main(): signal.signal(signal.SIGINT, signal_handler) signal.signal(signal.SIGTERM, signal_handler) - #open SDK handler + # Connect to state db for notification sending + state_db = SonicV2Connector(host=REDIS_HOSTIP) + state_db.connect(state_db.STATE_DB) + + # Open SDK handler log_info("starting mlnx-sfpd...") rc, handle = sx_api_open(None) - retry_time = 1 + retry_time = 1 while rc != SX_STATUS_SUCCESS: time.sleep(2**retry_time) retry_time += 1 rc, handle = sx_api_open(None) if retry_time > 20: - log_error("Failed to open api handle.\nPlease check that SDK is running.") + log_error("Failed to open api handle. Please check that SDK is running.") sys.exit(errno.EACCES) - #open recv fd - rx_fd_p = new_sx_fd_t_p() + # Open recv fd + rx_fd_p = new_sx_fd_t_p() rc = sx_api_host_ifc_open(handle, rx_fd_p) if rc != 0: log_error("sx_api_host_ifc_open exit with error, rc %d" % rc) exit(rc) - # set up general host ifc parameters + # Set up general host ifc parameters swid = 0 cmd = SX_ACCESS_CMD_REGISTER uc_p = new_sx_user_channel_t_p() @@ -153,26 +190,34 @@ def main(): log_error("sx_api_host_ifc_trap_id_register_set exit with error, rc %d" % rc) exit(rc) - #connect to state db for notification sending - state_db = SonicV2Connector(host=REDIS_HOSTIP) - state_db.connect(state_db.STATE_DB) + liveness_info_update = sfpd_liveness_update_task(state_db) + liveness_info_update.task_run() - #main loop for sfp event listening + # Main loop for sfp event listening log_info("mlnx-sfpd started") while True: - state = STATUS_UNKNOWN - port_list, module_state = sx_recv(rx_fd_p, handle) - if module_state in sfp_value_status_dict: state = sfp_value_status_dict[module_state] + sfp_state = STATUS_UNKNOWN + rc, port_list, module_state = sx_recv(rx_fd_p, handle) + if not rc: + log_error("Failed to recv event from SDK, please check that SDK is running.") + break + + if module_state in sfp_value_status_dict: sfp_state = sfp_value_status_dict[module_state] - if state != STATUS_UNKNOWN: + if sfp_state != STATUS_UNKNOWN: for port in port_list: - log_info("SFP on port %d state %s" % (port, state)) - send_sfp_notification(state_db, str(port), state) + log_info("SFP on port %d state %s" % (port, sfp_state)) + send_sfp_notification(state_db, str(port), sfp_state) log_info("sfp change event handling done") - ''' - # TODO: clean open handlers before exit, need find out which errors can be raised by SDK in this case. + # Stop liveness update task + liveness_info_update.task_stop() + + # Remove mlnx-sfpd liveness key in DB if not expired yet. + if state_db.exists('STATE_DB', 'MLNX_SFPD_TASK|LIVENESS'): + state_db.delete(state_db, 'MLNX_SFPD_TASK|LIVENESS') + # unregister trap id cmd = SX_ACCESS_CMD_DEREGISTER rc = sx_api_host_ifc_trap_id_register_set(handle, cmd, swid, trap_id, uc_p) @@ -180,20 +225,20 @@ def main(): log_error("sx_api_host_ifc_trap_id_register_set exit with error, rc %d" % rc) exit(rc) - # close read fp + # Close read fp rc = sx_api_host_ifc_close(handle, rx_fd_p) if rc != 0: log_error("sx_api_host_ifc_close exit with error, rc %d" % rc) exit(rc) - # close sdk handler + # Close sdk handler rc = sx_api_close(handle) if rc != 0: - log_error("exit with error, rc %d" % rc) + log_error("sx_api_close exit with error, rc %d" % rc) exit(rc) log_info("mlnx-sfpd exited") - ''' + if __name__ == '__main__': main() From c059d9982ac724e758e6a30e6e8347215b73b3f6 Mon Sep 17 00:00:00 2001 From: lguohan Date: Fri, 17 Aug 2018 09:06:05 -0700 Subject: [PATCH 159/180] [baseimage]: install picocom 3.1 in base image (#1943) * [baseimage]: install picocom 3.1 in base image Signed-off-by: Guohan Lu * add picocom to stretch build Signed-off-by: Guohan Lu * fix slave.mk bug Signed-off-by: Guohan Lu --- build_debian.sh | 6 ++++-- rules/picocom.mk | 11 +++++++++++ slave.mk | 3 ++- sonic-slave-stretch/Dockerfile | 4 +++- src/picocom/Makefile | 28 ++++++++++++++++++++++++++++ src/picocom/debhelper_10.patch | 11 +++++++++++ 6 files changed, 59 insertions(+), 4 deletions(-) create mode 100644 rules/picocom.mk create mode 100644 src/picocom/Makefile create mode 100644 src/picocom/debhelper_10.patch diff --git a/build_debian.sh b/build_debian.sh index 28b9833612b1..fea55144cfa0 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -227,8 +227,7 @@ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y in hping3 \ python-scapy \ tcptraceroute \ - mtr-tiny \ - picocom + mtr-tiny sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y download \ grub-pc-bin @@ -238,6 +237,9 @@ sudo mv $FILESYSTEM_ROOT/grub-pc-bin*.deb $FILESYSTEM_ROOT/$PLATFORM_DIR/x86_64- sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/libwrap0_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f +sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/picocom_*.deb || \ + sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f + ## Disable kexec supported reboot which was installed by default sudo sed -i 's/LOAD_KEXEC=true/LOAD_KEXEC=false/' $FILESYSTEM_ROOT/etc/default/kexec diff --git a/rules/picocom.mk b/rules/picocom.mk new file mode 100644 index 000000000000..a45ac9ecbbe6 --- /dev/null +++ b/rules/picocom.mk @@ -0,0 +1,11 @@ +# picocom packages + +PICOCOM_VERSION = 3.1-2 + +export PICOCOM_VERSION + +PICOCOM = picocom_$(PICOCOM_VERSION)_amd64.deb +$(PICOCOM)_SRC_PATH = $(SRC_PATH)/picocom +SONIC_MAKE_DEBS += $(PICOCOM) + +SONIC_STRETCH_DEBS += $(PICOCOM) diff --git a/slave.mk b/slave.mk index 4f1998680b29..a16a0cb488c1 100644 --- a/slave.mk +++ b/slave.mk @@ -462,7 +462,8 @@ $(addprefix $(TARGET_PATH)/, $(SONIC_INSTALLERS)) : $(TARGET_PATH)/% : \ $(BASH) \ $(LIBWRAP) \ $(LIBPAM_TACPLUS) \ - $(LIBNSS_TACPLUS)) \ + $(LIBNSS_TACPLUS) \ + $(PICOCOM)) \ $$(addprefix $(TARGET_PATH)/,$$($$*_DOCKERS)) \ $$(addprefix $(PYTHON_WHEELS_PATH)/,$(SONIC_CONFIG_ENGINE)) \ $$(addprefix $(PYTHON_WHEELS_PATH)/,$(SONIC_PLATFORM_COMMON_PY2)) diff --git a/sonic-slave-stretch/Dockerfile b/sonic-slave-stretch/Dockerfile index 4f7582efa0b4..79f86bd7e255 100644 --- a/sonic-slave-stretch/Dockerfile +++ b/sonic-slave-stretch/Dockerfile @@ -201,7 +201,9 @@ RUN apt-get update && apt-get install -y \ # For pam_tacplus build autoconf-archive \ # For initramfs - bash-completion + bash-completion \ +# For picocom + pandoc # For linux build RUN apt-get -y build-dep linux diff --git a/src/picocom/Makefile b/src/picocom/Makefile new file mode 100644 index 000000000000..46b6034da9fa --- /dev/null +++ b/src/picocom/Makefile @@ -0,0 +1,28 @@ +.ONESHELL: +SHELL = /bin/bash +.SHELLFLAGS += -e + +MAIN_TARGET = picocom_$(PICOCOM_VERSION)_amd64.deb + +$(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : + # Remove any stale files + rm -rf ./picocom-3.1 + + # Get source package + wget -NO picocom_$(PICOCOM_VERSION).dsc "https://sonicstorage.blob.core.windows.net/packages/debian/picocom_3.1-2.dsc?sv=2015-04-05&sr=b&sig=puo9KA27jT9Ey%2FkxRPBLIm30gFDdQJF85VKA7vuv9hk%3D&se=2155-07-10T08%3A03%3A50Z&sp=r" + wget -NO picocom_$(PICOCOM_VERSION).debian.tar.xz "https://sonicstorage.blob.core.windows.net/packages/debian/picocom_3.1-2.debian.tar.xz?sv=2015-04-05&sr=b&sig=4HPuUi2FTb0AzCEsH9%2FsSfj17qIukyyOdRrHQFtjyBE%3D&se=2155-07-10T08%3A04%3A23Z&sp=r" + wget -NO picocom_3.1.orig.tar.gz "https://sonicstorage.blob.core.windows.net/packages/debian/picocom_3.1.orig.tar.gz?sv=2015-04-05&sr=b&sig=RjQ84sf%2B%2FQuI%2B0PAcbPHXvnlNAuP%2BQoVrp2xzDJZfX4%3D&se=2155-07-10T08%3A04%3A45Z&sp=r" + + dpkg-source -x picocom_$(PICOCOM_VERSION).dsc + + # Build source and Debian packages + pushd picocom-3.1 + patch -p0 < ../debhelper_10.patch + dpkg-buildpackage -rfakeroot -b -us -uc -j$(SONIC_CONFIG_MAKE_JOBS) + popd + + # Move the newly-built .deb packages to the destination directory + mv $(DERIVED_TARGETS) $* $(DEST)/ + +$(addprefix $(DEST)/, $(DERIVED_TARGETS)): $(DEST)/% : $(DEST)/$(MAIN_TARGET) + diff --git a/src/picocom/debhelper_10.patch b/src/picocom/debhelper_10.patch new file mode 100644 index 000000000000..6c0ff47a553e --- /dev/null +++ b/src/picocom/debhelper_10.patch @@ -0,0 +1,11 @@ +--- debian/control.old 2018-08-17 08:05:35.996230100 +0000 ++++ debian/control 2018-08-17 08:05:43.712230100 +0000 +@@ -3,7 +3,7 @@ + Priority: optional + Maintainer: Matt Palmer + Uploaders: W. Martin Borgert +-Build-Depends: debhelper (>= 11), ++Build-Depends: debhelper (>= 10), + pandoc + Standards-Version: 4.1.3 + Rules-Requires-Root: no From f499254f4638552edd94fdda5cf8519bf41ee64b Mon Sep 17 00:00:00 2001 From: Kebo Liu Date: Sat, 18 Aug 2018 00:06:32 +0800 Subject: [PATCH 160/180] [swsssdk]: update DBInterface submodule (#1942) --- src/sonic-py-swsssdk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-py-swsssdk b/src/sonic-py-swsssdk index ca540c9c51e2..6272b5f7abb7 160000 --- a/src/sonic-py-swsssdk +++ b/src/sonic-py-swsssdk @@ -1 +1 @@ -Subproject commit ca540c9c51e2bb704802a89ecd2b485578bd8211 +Subproject commit 6272b5f7abb743411c703dac46eb39f951b57818 From f05ee30d53631e4fc96df20fd78011c76b116a86 Mon Sep 17 00:00:00 2001 From: lguohan Date: Fri, 17 Aug 2018 11:13:08 -0700 Subject: [PATCH 161/180] [sai]: upgrade SAI to version 1.3.3 (#1944) * [sai]: upgrade SAI to version 1.3.3 Signed-off-by: Guohan Lu * update mellanox sai --- platform/broadcom/sai.mk | 8 ++++---- platform/mellanox/mlnx-sai.mk | 2 +- src/sonic-sairedis | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/platform/broadcom/sai.mk b/platform/broadcom/sai.mk index 77171281d8e3..1ae99439fda0 100644 --- a/platform/broadcom/sai.mk +++ b/platform/broadcom/sai.mk @@ -1,9 +1,9 @@ -BRCM_SAI = libsaibcm_3.1.3.5-5_amd64.deb -$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/bcmsai/libsaibcm_3.1.3.5-5_amd64.deb?sv=2015-04-05&sr=b&sig=QPeazVTcPxPiWnLQRX4BqAAoyo0kTXJlfNAAtp2nilk%3D&se=2155-06-28T00%3A35%3A53Z&sp=r" +BRCM_SAI = libsaibcm_3.1.3.5-7_amd64.deb +$(BRCM_SAI)_URL = "https://sonicstorage.blob.core.windows.net/packages/bcmsai/libsaibcm_3.1.3.5-7_amd64.deb?sv=2015-04-05&sr=b&sig=0FaCT4a%2B07%2FkMIqZQF8NKk3UQL%2BU5M9icfe23F6rThY%3D&se=2155-07-10T08%3A53%3A11Z&sp=r" -BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5-5_amd64.deb +BRCM_SAI_DEV = libsaibcm-dev_3.1.3.5-7_amd64.deb $(eval $(call add_derived_package,$(BRCM_SAI),$(BRCM_SAI_DEV))) -$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/bcmsai/libsaibcm-dev_3.1.3.5-5_amd64.deb?sv=2015-04-05&sr=b&sig=6yrT5BVHkTr5955Rf9sADlVVN8o8TzxSjoj3JZg6nHw%3D&se=2155-06-28T00%3A37%3A34Z&sp=r" +$(BRCM_SAI_DEV)_URL = "https://sonicstorage.blob.core.windows.net/packages/bcmsai/libsaibcm-dev_3.1.3.5-7_amd64.deb?sv=2015-04-05&sr=b&sig=aTEosIZH90NExzK3opDzVFB%2FhWATEggoxKaTYudoR3I%3D&se=2155-07-10T08%3A53%3A39Z&sp=r" SONIC_ONLINE_DEBS += $(BRCM_SAI) $(BRCM_SAI_DEV) $(BRCM_SAI_DEV)_DEPENDS += $(BRCM_SAI) diff --git a/platform/mellanox/mlnx-sai.mk b/platform/mellanox/mlnx-sai.mk index e22705a88e3a..f2bb52a7b5e0 100644 --- a/platform/mellanox/mlnx-sai.mk +++ b/platform/mellanox/mlnx-sai.mk @@ -1,7 +1,7 @@ # Mellanox SAI MLNX_SAI_VERSION = SAIRel1.12.1-master -MLNX_SAI_REVISION = fe6e9d418223de9debd5348bb61af514b1df15f5 +MLNX_SAI_REVISION = 08749ea08d4e4e4f8611bb1e29fe16a5914eef31 export MLNX_SAI_VERSION MLNX_SAI_REVISION diff --git a/src/sonic-sairedis b/src/sonic-sairedis index c2c5e7cf7fa4..1c06195cc64f 160000 --- a/src/sonic-sairedis +++ b/src/sonic-sairedis @@ -1 +1 @@ -Subproject commit c2c5e7cf7fa477691cda579405dde3d2573e066c +Subproject commit 1c06195cc64f59120bb84ba9ffbd9051ec9214dc From 98082d56a0d17c1c6ef4ad18c9322f2fa67919af Mon Sep 17 00:00:00 2001 From: Joe LeVeque Date: Fri, 17 Aug 2018 17:38:20 -0700 Subject: [PATCH 162/180] [baseimage]: Download picocom version 3.1-2 from stretch-backports; No longer build from source (#1946) --- build_debian.sh | 8 ++++-- files/apt/sources.list | 1 + ...ian_archive_trafficmanager_net_debian.list | 1 + rules/picocom.mk | 11 -------- slave.mk | 3 +- sonic-slave-stretch/Dockerfile | 6 ++-- src/picocom/Makefile | 28 ------------------- src/picocom/debhelper_10.patch | 11 -------- 8 files changed, 10 insertions(+), 59 deletions(-) delete mode 100644 rules/picocom.mk delete mode 100644 src/picocom/Makefile delete mode 100644 src/picocom/debhelper_10.patch diff --git a/build_debian.sh b/build_debian.sh index fea55144cfa0..28493ea16877 100755 --- a/build_debian.sh +++ b/build_debian.sh @@ -229,6 +229,11 @@ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y in tcptraceroute \ mtr-tiny +# Install certain fundamental packages from stretch-backports in order to get +# more up-to-date (but potentially less stable) versions +sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y -t stretch-backports install \ + picocom + sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y download \ grub-pc-bin @@ -237,9 +242,6 @@ sudo mv $FILESYSTEM_ROOT/grub-pc-bin*.deb $FILESYSTEM_ROOT/$PLATFORM_DIR/x86_64- sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/libwrap0_*.deb || \ sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f -sudo dpkg --root=$FILESYSTEM_ROOT -i target/debs/picocom_*.deb || \ - sudo LANG=C DEBIAN_FRONTEND=noninteractive chroot $FILESYSTEM_ROOT apt-get -y install -f - ## Disable kexec supported reboot which was installed by default sudo sed -i 's/LOAD_KEXEC=true/LOAD_KEXEC=false/' $FILESYSTEM_ROOT/etc/default/kexec diff --git a/files/apt/sources.list b/files/apt/sources.list index bbcbbe64f691..b1ce507a44f5 100644 --- a/files/apt/sources.list +++ b/files/apt/sources.list @@ -5,3 +5,4 @@ deb http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-fr deb-src http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free deb http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free deb-src http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free +deb http://debian-archive.trafficmanager.net/debian/ stretch-backports main contrib non-free diff --git a/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list b/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list index 1ddb193b1034..cda7053c35c1 100644 --- a/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list +++ b/files/image_config/apt/sources.list.d/debian_archive_trafficmanager_net_debian.list @@ -1,2 +1,3 @@ deb http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free deb http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free +deb http://debian-archive.trafficmanager.net/debian/ stretch-backports main contrib non-free diff --git a/rules/picocom.mk b/rules/picocom.mk deleted file mode 100644 index a45ac9ecbbe6..000000000000 --- a/rules/picocom.mk +++ /dev/null @@ -1,11 +0,0 @@ -# picocom packages - -PICOCOM_VERSION = 3.1-2 - -export PICOCOM_VERSION - -PICOCOM = picocom_$(PICOCOM_VERSION)_amd64.deb -$(PICOCOM)_SRC_PATH = $(SRC_PATH)/picocom -SONIC_MAKE_DEBS += $(PICOCOM) - -SONIC_STRETCH_DEBS += $(PICOCOM) diff --git a/slave.mk b/slave.mk index a16a0cb488c1..4f1998680b29 100644 --- a/slave.mk +++ b/slave.mk @@ -462,8 +462,7 @@ $(addprefix $(TARGET_PATH)/, $(SONIC_INSTALLERS)) : $(TARGET_PATH)/% : \ $(BASH) \ $(LIBWRAP) \ $(LIBPAM_TACPLUS) \ - $(LIBNSS_TACPLUS) \ - $(PICOCOM)) \ + $(LIBNSS_TACPLUS)) \ $$(addprefix $(TARGET_PATH)/,$$($$*_DOCKERS)) \ $$(addprefix $(PYTHON_WHEELS_PATH)/,$(SONIC_CONFIG_ENGINE)) \ $$(addprefix $(PYTHON_WHEELS_PATH)/,$(SONIC_PLATFORM_COMMON_PY2)) diff --git a/sonic-slave-stretch/Dockerfile b/sonic-slave-stretch/Dockerfile index 79f86bd7e255..d34cfda71c06 100644 --- a/sonic-slave-stretch/Dockerfile +++ b/sonic-slave-stretch/Dockerfile @@ -6,7 +6,7 @@ RUN echo "deb http://debian-archive.trafficmanager.net/debian/ stretch main cont echo "deb-src http://debian-archive.trafficmanager.net/debian/ stretch main contrib non-free" >> /etc/apt/sources.list && \ echo "deb http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free" >> /etc/apt/sources.list && \ echo "deb-src http://debian-archive.trafficmanager.net/debian-security/ stretch/updates main contrib non-free" >> /etc/apt/sources.list && \ - echo 'deb http://debian-archive.trafficmanager.net/debian stretch-backports main' >> /etc/apt/sources.list + echo "deb http://debian-archive.trafficmanager.net/debian stretch-backports main" >> /etc/apt/sources.list ## Make apt-get non-interactive ENV DEBIAN_FRONTEND=noninteractive @@ -201,9 +201,7 @@ RUN apt-get update && apt-get install -y \ # For pam_tacplus build autoconf-archive \ # For initramfs - bash-completion \ -# For picocom - pandoc + bash-completion # For linux build RUN apt-get -y build-dep linux diff --git a/src/picocom/Makefile b/src/picocom/Makefile deleted file mode 100644 index 46b6034da9fa..000000000000 --- a/src/picocom/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -.ONESHELL: -SHELL = /bin/bash -.SHELLFLAGS += -e - -MAIN_TARGET = picocom_$(PICOCOM_VERSION)_amd64.deb - -$(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : - # Remove any stale files - rm -rf ./picocom-3.1 - - # Get source package - wget -NO picocom_$(PICOCOM_VERSION).dsc "https://sonicstorage.blob.core.windows.net/packages/debian/picocom_3.1-2.dsc?sv=2015-04-05&sr=b&sig=puo9KA27jT9Ey%2FkxRPBLIm30gFDdQJF85VKA7vuv9hk%3D&se=2155-07-10T08%3A03%3A50Z&sp=r" - wget -NO picocom_$(PICOCOM_VERSION).debian.tar.xz "https://sonicstorage.blob.core.windows.net/packages/debian/picocom_3.1-2.debian.tar.xz?sv=2015-04-05&sr=b&sig=4HPuUi2FTb0AzCEsH9%2FsSfj17qIukyyOdRrHQFtjyBE%3D&se=2155-07-10T08%3A04%3A23Z&sp=r" - wget -NO picocom_3.1.orig.tar.gz "https://sonicstorage.blob.core.windows.net/packages/debian/picocom_3.1.orig.tar.gz?sv=2015-04-05&sr=b&sig=RjQ84sf%2B%2FQuI%2B0PAcbPHXvnlNAuP%2BQoVrp2xzDJZfX4%3D&se=2155-07-10T08%3A04%3A45Z&sp=r" - - dpkg-source -x picocom_$(PICOCOM_VERSION).dsc - - # Build source and Debian packages - pushd picocom-3.1 - patch -p0 < ../debhelper_10.patch - dpkg-buildpackage -rfakeroot -b -us -uc -j$(SONIC_CONFIG_MAKE_JOBS) - popd - - # Move the newly-built .deb packages to the destination directory - mv $(DERIVED_TARGETS) $* $(DEST)/ - -$(addprefix $(DEST)/, $(DERIVED_TARGETS)): $(DEST)/% : $(DEST)/$(MAIN_TARGET) - diff --git a/src/picocom/debhelper_10.patch b/src/picocom/debhelper_10.patch deleted file mode 100644 index 6c0ff47a553e..000000000000 --- a/src/picocom/debhelper_10.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- debian/control.old 2018-08-17 08:05:35.996230100 +0000 -+++ debian/control 2018-08-17 08:05:43.712230100 +0000 -@@ -3,7 +3,7 @@ - Priority: optional - Maintainer: Matt Palmer - Uploaders: W. Martin Borgert --Build-Depends: debhelper (>= 11), -+Build-Depends: debhelper (>= 10), - pandoc - Standards-Version: 4.1.3 - Rules-Requires-Root: no From 4aa3f7af68ede3cf7017db5094d2819f7b583085 Mon Sep 17 00:00:00 2001 From: Volodymyr Samotiy Date: Mon, 20 Aug 2018 19:06:21 +0300 Subject: [PATCH 163/180] [mellanox]: Fix system EEPROM for MSN2740 platform (#1950) Signed-off-by: Volodymyr Samotiy --- ...x-system-EEPROM-for-MSN2740-platform.patch | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 platform/mellanox/hw-management/Fix-system-EEPROM-for-MSN2740-platform.patch diff --git a/platform/mellanox/hw-management/Fix-system-EEPROM-for-MSN2740-platform.patch b/platform/mellanox/hw-management/Fix-system-EEPROM-for-MSN2740-platform.patch new file mode 100644 index 000000000000..5519692e12ed --- /dev/null +++ b/platform/mellanox/hw-management/Fix-system-EEPROM-for-MSN2740-platform.patch @@ -0,0 +1,25 @@ +From cebfa8338c2e5953a097de2a776bb680e7a34410 Mon Sep 17 00:00:00 2001 +From: Volodymyr Samotiy +Date: Fri, 17 Aug 2018 13:27:16 +0300 +Subject: Fix system EEPROM for MSN2740 platform + +Signed-off-by: Volodymyr Samotiy +--- + usr/etc/mlnx/mlnx-hw-management | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/usr/etc/mlnx/mlnx-hw-management b/usr/etc/mlnx/mlnx-hw-management +index 54cdd30..4f0d265 100755 +--- a/usr/etc/mlnx/mlnx-hw-management ++++ b/usr/etc/mlnx/mlnx-hw-management +@@ -107,6 +107,7 @@ msn2740_connect_table=( mlxsw_minimal 0x48 2 \ + max11603 0x64 5 \ + tmp102 0x49 6 \ + tmp102 0x48 7 \ ++ 24c32 0x51 8 \ + max11603 0x6d 15 \ + 24c32 0x51 16) + +-- +1.9.1 + From e7ef637a097404efb482434c22950b7a31a6b313 Mon Sep 17 00:00:00 2001 From: Ying Xie Date: Mon, 20 Aug 2018 10:11:11 -0700 Subject: [PATCH 164/180] [config-bcm] move broadcom config files to device folder (#1947) - Future versions of SAI packages will stop carrying these files. Signed-off-by: Ying Xie --- .../Accton-AS5712-54X/sai.profile | 2 +- .../td2-as5712-72x10G.config.bcm | 145 +++ .../Accton-AS7312-54X/sai.profile | 2 +- .../th-as7312-48x25G+6x100G.config.bcm | 519 +++++++++ .../Accton-AS7712-32X/sai.profile | 2 +- .../th-as7712-32x100G.config.bcm | 570 +++++++++ .../Accton-AS7716-32X/sai.profile | 2 +- .../th-as7716-32x100G.config.bcm | 570 +++++++++ .../Accton-AS7716-32XB/sai.profile | 2 +- .../th-as7716-32x100G.config.bcm | 570 +++++++++ .../Accton-AS7816-64X/sai.profile | 2 +- .../th2-as7816-64x100G.config.bcm | 875 ++++++++++++++ .../Arista-7050-QX-32S/sai.profile | 2 +- .../td2-a7050-qx32s-32x40G.config.bcm | 745 ++++++++++++ .../Arista-7060CX-32S-C32/sai.profile | 2 +- .../th-a7060-cx32s-32x100G-t1.config.bcm | 446 ++++++++ .../Arista-7060CX-32S-D48C8/sai.profile | 2 +- .../th-a7060-cx32s-8x100G+48x50G.config.bcm | 547 +++++++++ .../Arista-7260CX3-C64/sai.profile | 2 +- .../th2-a7260cx3-64-64x100G.config.bcm | 1016 +++++++++++++++++ .../Seastone-DX010-10-50/sai.profile | 2 +- ...th-seastone-dx010-96x10G-16x50G.config.bcm | 927 +++++++++++++++ .../Seastone-DX010-50/sai.profile | 2 +- .../th-seastone-dx010-64x50G.config.bcm | 621 ++++++++++ .../Seastone-DX010/sai.profile | 2 +- .../th-seastone-dx010-32x100G.config.bcm | 374 ++++++ .../Force10-S6000/sai.profile | 2 +- .../Force10-S6000/td2-s6000-32x40G.config.bcm | 647 +++++++++++ .../Force10-S6100/sai.profile.j2 | 6 +- .../th-s6100-64x40G-t0.config.bcm | 415 +++++++ .../th-s6100-64x40G-t1.config.bcm | 415 +++++++ .../DellEMC-Z9264f/sai.profile | 2 +- .../th2-z9264f-64x100G.config.bcm | 1007 ++++++++++++++++ .../Delta-ag5648/sai.profile | 2 +- .../th-ag5648-48x25G+6x100G.config.bcm | 277 +++++ .../Delta-ag9032v1/sai.profile | 2 +- .../th-ag9032v1-32x100G.config.bcm | 523 +++++++++ .../Delta-ag9064/sai.profile | 2 +- .../th2-ag9064-64x100G.config.bcm | 803 +++++++++++++ .../Facebook-W100-C32/sai.profile | 2 +- .../th-wedge100-32x100G.config.bcm | 433 +++++++ .../INGRASYS-S8810-32Q/sai.profile | 2 +- .../td2-s8810-32x40G.config.bcm | 474 ++++++++ .../INGRASYS-S8900-54XC/sai.profile | 2 +- .../th-s8900-48x25G+6x100G.config.bcm | 337 ++++++ .../INGRASYS-S8900-64XC/sai.profile | 2 +- .../th-s8900-48x25G+16x100G.config.bcm | 448 ++++++++ .../INGRASYS-S9100-C32/sai.profile | 2 +- .../th-s9100-32x100G.config.bcm | 359 ++++++ .../MiTAC-LY1200-B32H0-C3/sai.profile | 2 +- .../th-ly1200-32x100G.config.bcm | 319 ++++++ .../Quanta-IX1B-32X/sai.profile | 2 +- .../th-ix1b-32x100G.config.bcm | 253 ++++ 53 files changed, 14663 insertions(+), 28 deletions(-) create mode 100644 device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/td2-as5712-72x10G.config.bcm create mode 100644 device/accton/x86_64-accton_as7312_54x-r0/Accton-AS7312-54X/th-as7312-48x25G+6x100G.config.bcm create mode 100644 device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/th-as7712-32x100G.config.bcm create mode 100644 device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/th-as7716-32x100G.config.bcm create mode 100644 device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/th-as7716-32x100G.config.bcm create mode 100644 device/accton/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/th2-as7816-64x100G.config.bcm create mode 100644 device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/td2-a7050-qx32s-32x40G.config.bcm create mode 100644 device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/th-a7060-cx32s-32x100G-t1.config.bcm create mode 100644 device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/th-a7060-cx32s-8x100G+48x50G.config.bcm create mode 100644 device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/th2-a7260cx3-64-64x100G.config.bcm create mode 100644 device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/th-seastone-dx010-96x10G-16x50G.config.bcm create mode 100644 device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/th-seastone-dx010-64x50G.config.bcm create mode 100644 device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/th-seastone-dx010-32x100G.config.bcm create mode 100644 device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/td2-s6000-32x40G.config.bcm create mode 100644 device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t0.config.bcm create mode 100644 device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t1.config.bcm create mode 100644 device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/th2-z9264f-64x100G.config.bcm create mode 100644 device/delta/x86_64-delta_ag5648-r0/Delta-ag5648/th-ag5648-48x25G+6x100G.config.bcm create mode 100644 device/delta/x86_64-delta_ag9032v1-r0/Delta-ag9032v1/th-ag9032v1-32x100G.config.bcm create mode 100644 device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/th2-ag9064-64x100G.config.bcm create mode 100644 device/facebook/x86_64-facebook_wedge100-r0/Facebook-W100-C32/th-wedge100-32x100G.config.bcm create mode 100644 device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/td2-s8810-32x40G.config.bcm create mode 100644 device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm create mode 100644 device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm create mode 100644 device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/th-s9100-32x100G.config.bcm create mode 100644 device/mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/th-ly1200-32x100G.config.bcm create mode 100644 device/quanta/x86_64-quanta_ix1b_32x-r0/Quanta-IX1B-32X/th-ix1b-32x100G.config.bcm diff --git a/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/sai.profile b/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/sai.profile index 01d0f6642549..aec436d22608 100755 --- a/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/sai.profile +++ b/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/td2-as5712-72x10G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/td2-as5712-72x10G.config.bcm diff --git a/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/td2-as5712-72x10G.config.bcm b/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/td2-as5712-72x10G.config.bcm new file mode 100644 index 000000000000..715468c621a1 --- /dev/null +++ b/device/accton/x86_64-accton_as5712_54x-r0/Accton-AS5712-54X/td2-as5712-72x10G.config.bcm @@ -0,0 +1,145 @@ +os=unix +bcm_stat_flags=0 +parity_enable=0 +parity_correction=0 + +l2_mem_entries=163840 +l3_mem_entries=81920 +mmu_lossless=0 +lls_num_l2uc=12 +module_64ports=0 + +#SFI +serdes_if_type=9 + +port_init_cl72=0 +phy_an_c73=5 # TSCMOD_CL73_CL37 + +#sdk6.5.5 only supports 156(default) or 125 +#xgxs_lcpll_xtal_refclk=1 +tslam_dma_enable=1 +table_dma_enable=1 + +#for 72 ports with 48 10G ports and 6 40G ports for breakout mode +pbmp_oversubscribe=0x1fffffffffffffffffe +pbmp_xport_xe=0x1fffffffffffffffffe + +rate_ext_mdio_divisor=96 + +#SFP+ 1-4 from WC3 +portmap_1=13:10 +portmap_2=14:10 +portmap_3=15:10 +portmap_4=16:10 + +#SFP+ 5-8 from WC5 +portmap_5=21:10 +portmap_6=22:10 +portmap_7=23:10 +portmap_8=24:10 + +#SFP+ 9-12 from WC6 +portmap_9=25:10 +portmap_10=26:10 +portmap_11=27:10 +portmap_12=28:10 + +#SFP+ 13-16 from WC7 +portmap_13=29:10 +portmap_14=30:10 +portmap_15=31:10 +portmap_16=32:10 + +#SFP+ 17-20 from WC11 +portmap_17=45:10 +portmap_18=46:10 +portmap_19=47:10 +portmap_20=48:10 + +#SFP+ 21-24 from WC12 +portmap_21=49:10 +portmap_22=50:10 +portmap_23=51:10 +portmap_24=52:10 + +#SFP+ 25-28 from WC13 +portmap_25=53:10 +portmap_26=54:10 +portmap_27=55:10 +portmap_28=56:10 + +#SFP+ 29-32 from WC14 +portmap_29=57:10 +portmap_30=58:10 +portmap_31=59:10 +portmap_32=60:10 + +#SFP+ 33-36 from WC15 +portmap_33=61:10 +portmap_34=62:10 +portmap_35=63:10 +portmap_36=64:10 + +#SFP+ 37-40 from WC16 +portmap_37=65:10 +portmap_38=66:10 +portmap_39=67:10 +portmap_40=68:10 + +#SFP+ 41-44 from WC17 +portmap_41=69:10 +portmap_42=70:10 +portmap_43=71:10 +portmap_44=72:10 + +#SFP+ 45-48 from WC18 +portmap_45=73:10 +portmap_46=74:10 +portmap_47=75:10 +portmap_48=76:10 + +# QSFP+ 49/WC24/port 49 +portmap_49=97:10 +portmap_50=98:10 +portmap_51=99:10 +portmap_52=100:10 + +# QSFP+ 51/WC25/port 50 +portmap_53=101:10 +portmap_54=102:10 +portmap_55=103:10 +portmap_56=104:10 + +# QSFP+ 53/WC20/port 51 +portmap_57=81:10 +portmap_58=82:10 +portmap_59=83:10 +portmap_60=84:10 + +# QSFP+ 50/WC26/port 52 +portmap_61=105:10 +portmap_62=106:10 +portmap_63=107:10 +portmap_64=108:10 + +# QSFP+ 52/WC27/port 53 +portmap_65=109:10 +portmap_66=110:10 +portmap_67=111:10 +portmap_68=112:10 + +# QSFP+ 54/WC19/port 54 +portmap_69=77:10 +portmap_70=78:10 +portmap_71=79:10 +portmap_72=80:10 + +# L3 ECMP +# - In Trident2, VP LAGs share the same table as ECMP group table. +# The first N entries are reserved for VP LAGs, where N is the value of the +# config property "max_vp_lags". By default this was set to 256 +l3_max_ecmp_mode=1 +max_vp_lags=0 + +stable_size=0x2000000 +scache_filename=/tmp/scache diff --git a/device/accton/x86_64-accton_as7312_54x-r0/Accton-AS7312-54X/sai.profile b/device/accton/x86_64-accton_as7312_54x-r0/Accton-AS7312-54X/sai.profile index f239b822834b..31aefe2c2905 100644 --- a/device/accton/x86_64-accton_as7312_54x-r0/Accton-AS7312-54X/sai.profile +++ b/device/accton/x86_64-accton_as7312_54x-r0/Accton-AS7312-54X/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-as7312-48x25G+6x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-as7312-48x25G+6x100G.config.bcm diff --git a/device/accton/x86_64-accton_as7312_54x-r0/Accton-AS7312-54X/th-as7312-48x25G+6x100G.config.bcm b/device/accton/x86_64-accton_as7312_54x-r0/Accton-AS7312-54X/th-as7312-48x25G+6x100G.config.bcm new file mode 100644 index 000000000000..eef4d987e8ed --- /dev/null +++ b/device/accton/x86_64-accton_as7312_54x-r0/Accton-AS7312-54X/th-as7312-48x25G+6x100G.config.bcm @@ -0,0 +1,519 @@ +# accton_as7312_54x 48x25G+6x100G SDK config +os=unix +schan_intr_enable=0 + +l2_mem_entries=40960 +l2xmsg_mode=1 +l3_mem_entries=40960 +mem_cache_enable=0 +parity_correction=0 +parity_enable=0 +mmu_lossless=1 + +pbmp_oversubscribe=0x0407ffc00ff00ff003fc3ffc00200222 +pbmp_xport_xe=0x0407ffd00ff00ff403fc3ffc00200222 + +## FC10 ## +dport_map_port_42=1 +dport_map_port_43=2 +dport_map_port_44=3 +dport_map_port_45=4 + +## FC12 ## +dport_map_port_50=5 +dport_map_port_51=6 +dport_map_port_52=7 +dport_map_port_53=8 + +## FC13 ## +dport_map_port_54=9 +dport_map_port_55=10 +dport_map_port_56=11 +dport_map_port_57=12 + +## FC16 ## +dport_map_port_68=13 +dport_map_port_69=14 +dport_map_port_70=15 +dport_map_port_71=16 + +## FC8 ## +dport_map_port_34=17 +dport_map_port_35=18 +dport_map_port_36=19 +dport_map_port_37=20 + +## FC9 ## +dport_map_port_38=21 +dport_map_port_39=22 +dport_map_port_40=23 +dport_map_port_41=24 + +## FC17 ## +dport_map_port_72=25 +dport_map_port_73=26 +dport_map_port_74=27 +dport_map_port_75=28 + +## FC20 ## +dport_map_port_84=29 +dport_map_port_85=30 +dport_map_port_86=31 +dport_map_port_87=32 + +## FC21 ## +dport_map_port_88=33 +dport_map_port_89=34 +dport_map_port_90=35 +dport_map_port_91=36 + +## FC24 ## +dport_map_port_102=37 +dport_map_port_103=38 +dport_map_port_104=39 +dport_map_port_105=40 + +## FC25 ## +dport_map_port_106=41 +dport_map_port_107=42 +dport_map_port_108=43 +dport_map_port_109=44 + +## FC26 ## +dport_map_port_110=45 +dport_map_port_111=46 +dport_map_port_112=47 +dport_map_port_113=48 + +## FC1 ## +dport_map_port_5=49 + +## FC0 ## +dport_map_port_1=50 + +## FC27 ## +dport_map_port_114=51 + +## FC5 ## +dport_map_port_21=52 + +## FC2 ## +dport_map_port_9=53 + +## FC29 ## +dport_map_port_122=54 + +#for KR +#dport_map_port_66=55 +#dport_map_port_100=56 + +/* Port Map */ +## FC10 ## +portmap_42=41:25 +portmap_43=42:25 +portmap_44=43:25 +portmap_45=44:25 + +## FC12 ## +portmap_50=49:25 +portmap_51=50:25 +portmap_52=51:25 +portmap_53=52:25 + + +## FC13 ## +portmap_54=53:25 +portmap_55=54:25 +portmap_56=55:25 +portmap_57=56:25 + +## FC16 ## +portmap_68=65:25 +portmap_69=66:25 +portmap_70=67:25 +portmap_71=68:25 + + +## FC8 ## +portmap_34=33:25 +portmap_35=34:25 +portmap_36=35:25 +portmap_37=36:25 + +## FC9 ## +portmap_38=37:25 +portmap_39=38:25 +portmap_40=39:25 +portmap_41=40:25 + +## FC17 ## +portmap_72=69:25 +portmap_73=70:25 +portmap_74=71:25 +portmap_75=72:25 + +## FC20 ## +portmap_84=81:25 +portmap_85=82:25 +portmap_86=83:25 +portmap_87=84:25 + + +## FC21 ## +portmap_88=85:25 +portmap_89=86:25 +portmap_90=87:25 +portmap_91=88:25 + +## FC24 ## +portmap_102=97:25 +portmap_103=98:25 +portmap_104=99:25 +portmap_105=100:25 + +## FC25 ## +portmap_106=101:25 +portmap_107=102:25 +portmap_108=103:25 +portmap_109=104:25 + +## FC26 ## +portmap_110=105:25 +portmap_111=106:25 +portmap_112=107:25 +portmap_113=108:25 + +## FC1 ## +portmap_5=5:100 + +## FC0 ## +portmap_1=1:100 + +## FC27 ## +portmap_114=109:100 + +## FC5 ## +portmap_21=21:100 + +## FC2 ## +portmap_9=9:100 + +## FC29 ## +portmap_122=117:100 + +# CPU to MAC +# TSC-E management port 1 +#portmap_66=129:10 +# TSC-E management port 2 +#portmap_100=131:10 + +xgxs_rx_lane_map_42=0x2310 +xgxs_rx_lane_map_43=0x2310 +xgxs_rx_lane_map_44=0x2310 +xgxs_rx_lane_map_45=0x2310 +xgxs_rx_lane_map_50=0x3210 +xgxs_rx_lane_map_51=0x3210 +xgxs_rx_lane_map_52=0x3210 +xgxs_rx_lane_map_53=0x3210 +xgxs_rx_lane_map_54=0x3210 +xgxs_rx_lane_map_55=0x3210 +xgxs_rx_lane_map_56=0x3210 +xgxs_rx_lane_map_57=0x3210 +xgxs_rx_lane_map_68=0x0123 +xgxs_rx_lane_map_69=0x0123 +xgxs_rx_lane_map_70=0x0123 +xgxs_rx_lane_map_71=0x0123 +xgxs_rx_lane_map_34=0x0123 +xgxs_rx_lane_map_35=0x0123 +xgxs_rx_lane_map_36=0x0123 +xgxs_rx_lane_map_37=0x0123 +xgxs_rx_lane_map_38=0x0123 +xgxs_rx_lane_map_39=0x0123 +xgxs_rx_lane_map_40=0x0123 +xgxs_rx_lane_map_41=0x0123 +xgxs_rx_lane_map_72=0x3210 +xgxs_rx_lane_map_73=0x3210 +xgxs_rx_lane_map_74=0x3210 +xgxs_rx_lane_map_75=0x3210 +xgxs_rx_lane_map_84=0x1032 +xgxs_rx_lane_map_85=0x1032 +xgxs_rx_lane_map_86=0x1032 +xgxs_rx_lane_map_87=0x1032 +xgxs_rx_lane_map_88=0x2301 +xgxs_rx_lane_map_89=0x2301 +xgxs_rx_lane_map_90=0x2301 +xgxs_rx_lane_map_91=0x2301 +xgxs_rx_lane_map_102=0x0123 +xgxs_rx_lane_map_103=0x0123 +xgxs_rx_lane_map_104=0x0123 +xgxs_rx_lane_map_105=0x0123 +xgxs_rx_lane_map_106=0x3210 +xgxs_rx_lane_map_107=0x3210 +xgxs_rx_lane_map_108=0x3210 +xgxs_rx_lane_map_109=0x3210 +xgxs_rx_lane_map_110=0x1032 +xgxs_rx_lane_map_111=0x1032 +xgxs_rx_lane_map_112=0x1032 +xgxs_rx_lane_map_113=0x1032 +xgxs_rx_lane_map_5=0x3210 +xgxs_rx_lane_map_1=0x3210 +xgxs_rx_lane_map_114=0x0123 +xgxs_rx_lane_map_21=0x0213 +xgxs_rx_lane_map_9=0x3210 +xgxs_rx_lane_map_122=0x1230 + +xgxs_tx_lane_map_42=0x0132 +xgxs_tx_lane_map_43=0x0132 +xgxs_tx_lane_map_44=0x0132 +xgxs_tx_lane_map_45=0x0132 +xgxs_tx_lane_map_50=0x3210 +xgxs_tx_lane_map_51=0x3210 +xgxs_tx_lane_map_52=0x3210 +xgxs_tx_lane_map_53=0x3210 +xgxs_tx_lane_map_54=0x3210 +xgxs_tx_lane_map_55=0x3210 +xgxs_tx_lane_map_56=0x3210 +xgxs_tx_lane_map_57=0x3210 +xgxs_tx_lane_map_68=0x0123 +xgxs_tx_lane_map_69=0x0123 +xgxs_tx_lane_map_70=0x0123 +xgxs_tx_lane_map_71=0x0123 +xgxs_tx_lane_map_34=0x0123 +xgxs_tx_lane_map_35=0x0123 +xgxs_tx_lane_map_36=0x0123 +xgxs_tx_lane_map_37=0x0123 +xgxs_tx_lane_map_38=0x0123 +xgxs_tx_lane_map_39=0x0123 +xgxs_tx_lane_map_40=0x0123 +xgxs_tx_lane_map_41=0x0123 +xgxs_tx_lane_map_72=0x0123 +xgxs_tx_lane_map_73=0x0123 +xgxs_tx_lane_map_74=0x0123 +xgxs_tx_lane_map_75=0x0123 +xgxs_tx_lane_map_84=0x0123 +xgxs_tx_lane_map_85=0x0123 +xgxs_tx_lane_map_86=0x0123 +xgxs_tx_lane_map_87=0x0123 +xgxs_tx_lane_map_88=0x2301 +xgxs_tx_lane_map_89=0x2301 +xgxs_tx_lane_map_90=0x2301 +xgxs_tx_lane_map_91=0x2301 +xgxs_tx_lane_map_102=0x0123 +xgxs_tx_lane_map_103=0x0123 +xgxs_tx_lane_map_104=0x0123 +xgxs_tx_lane_map_105=0x0123 +xgxs_tx_lane_map_106=0x3210 +xgxs_tx_lane_map_107=0x3210 +xgxs_tx_lane_map_108=0x3210 +xgxs_tx_lane_map_109=0x3210 +xgxs_tx_lane_map_110=0x1032 +xgxs_tx_lane_map_111=0x1032 +xgxs_tx_lane_map_112=0x1032 +xgxs_tx_lane_map_113=0x1032 +xgxs_tx_lane_map_5=0x3210 +xgxs_tx_lane_map_1=0x3210 +xgxs_tx_lane_map_114=0x0123 +xgxs_tx_lane_map_21=0x3210 +xgxs_tx_lane_map_9=0x3210 +xgxs_tx_lane_map_122=0x3210 + +#Polarity RX +phy_xaui_rx_polarity_flip_34=0x1 +phy_xaui_rx_polarity_flip_35=0x1 +phy_xaui_rx_polarity_flip_36=0x1 +phy_xaui_rx_polarity_flip_37=0x1 +phy_xaui_rx_polarity_flip_38=0x1 +phy_xaui_rx_polarity_flip_39=0x1 +phy_xaui_rx_polarity_flip_40=0x1 +phy_xaui_rx_polarity_flip_41=0x1 +phy_xaui_rx_polarity_flip_84=0x1 +phy_xaui_rx_polarity_flip_85=0x0 +phy_xaui_rx_polarity_flip_86=0x1 +phy_xaui_rx_polarity_flip_87=0x0 +phy_xaui_rx_polarity_flip_88=0x1 +phy_xaui_rx_polarity_flip_89=0x0 +phy_xaui_rx_polarity_flip_90=0x1 +phy_xaui_rx_polarity_flip_91=0x1 +phy_xaui_rx_polarity_flip_102=0x0 +phy_xaui_rx_polarity_flip_103=0x0 +phy_xaui_rx_polarity_flip_104=0x1 +phy_xaui_rx_polarity_flip_105=0x0 +phy_xaui_rx_polarity_flip_122=0xf +#Polarity TX +phy_xaui_tx_polarity_flip_42=0x1 +phy_xaui_tx_polarity_flip_43=0x1 +phy_xaui_tx_polarity_flip_44=0x1 +phy_xaui_tx_polarity_flip_45=0x1 +phy_xaui_tx_polarity_flip_34=0x1 +phy_xaui_tx_polarity_flip_35=0x1 +phy_xaui_tx_polarity_flip_36=0x1 +phy_xaui_tx_polarity_flip_37=0x1 +phy_xaui_tx_polarity_flip_38=0x0 +phy_xaui_tx_polarity_flip_39=0x1 +phy_xaui_tx_polarity_flip_40=0x0 +phy_xaui_tx_polarity_flip_41=0x1 +phy_xaui_tx_polarity_flip_72=0x1 +phy_xaui_tx_polarity_flip_73=0x1 +phy_xaui_tx_polarity_flip_74=0x1 +phy_xaui_tx_polarity_flip_75=0x1 +phy_xaui_tx_polarity_flip_84=0x1 +phy_xaui_tx_polarity_flip_85=0x1 +phy_xaui_tx_polarity_flip_86=0x1 +phy_xaui_tx_polarity_flip_87=0x1 +phy_xaui_tx_polarity_flip_88=0x1 +phy_xaui_tx_polarity_flip_89=0x1 +phy_xaui_tx_polarity_flip_90=0x1 +phy_xaui_tx_polarity_flip_91=0x1 +phy_xaui_tx_polarity_flip_102=0x1 +phy_xaui_tx_polarity_flip_103=0x1 +phy_xaui_tx_polarity_flip_104=0x1 +phy_xaui_tx_polarity_flip_105=0x1 +phy_xaui_tx_polarity_flip_122=0xb + +#Driver Current +serdes_driver_current_42=0x8 +serdes_driver_current_43=0x8 +serdes_driver_current_44=0x8 +serdes_driver_current_45=0x8 +serdes_driver_current_50=0x8 +serdes_driver_current_51=0x8 +serdes_driver_current_52=0x8 +serdes_driver_current_53=0x8 +serdes_driver_current_54=0x8 +serdes_driver_current_55=0x8 +serdes_driver_current_56=0x8 +serdes_driver_current_57=0x8 +serdes_driver_current_68=0x8 +serdes_driver_current_69=0x8 +serdes_driver_current_70=0x8 +serdes_driver_current_71=0x8 +serdes_driver_current_34=0x8 +serdes_driver_current_35=0x8 +serdes_driver_current_36=0x8 +serdes_driver_current_37=0x8 +serdes_driver_current_38=0x8 +serdes_driver_current_39=0x8 +serdes_driver_current_40=0x8 +serdes_driver_current_41=0x8 +serdes_driver_current_72=0x8 +serdes_driver_current_73=0x8 +serdes_driver_current_74=0x8 +serdes_driver_current_75=0x8 +serdes_driver_current_84=0x8 +serdes_driver_current_85=0x8 +serdes_driver_current_86=0x8 +serdes_driver_current_87=0x8 +serdes_driver_current_88=0x8 +serdes_driver_current_89=0x8 +serdes_driver_current_90=0x8 +serdes_driver_current_91=0x8 +serdes_driver_current_102=0x8 +serdes_driver_current_103=0x8 +serdes_driver_current_104=0x8 +serdes_driver_current_105=0x8 +serdes_driver_current_106=0x8 +serdes_driver_current_107=0x8 +serdes_driver_current_108=0x8 +serdes_driver_current_109=0x8 +serdes_driver_current_110=0x8 +serdes_driver_current_111=0x8 +serdes_driver_current_112=0x8 +serdes_driver_current_113=0x8 +serdes_driver_current_lane0_5=0x8 +serdes_driver_current_lane1_5=0x8 +serdes_driver_current_lane2_5=0x8 +serdes_driver_current_lane3_5=0x8 +serdes_driver_current_lane0_1=0x8 +serdes_driver_current_lane1_1=0x8 +serdes_driver_current_lane2_1=0x8 +serdes_driver_current_lane3_1=0x8 +serdes_driver_current_lane0_114=0x8 +serdes_driver_current_lane1_114=0x8 +serdes_driver_current_lane2_114=0x8 +serdes_driver_current_lane3_114=0x8 +serdes_driver_current_lane0_21=0x8 +serdes_driver_current_lane1_21=0x8 +serdes_driver_current_lane2_21=0x8 +serdes_driver_current_lane3_21=0x8 +serdes_driver_current_lane0_9=0x8 +serdes_driver_current_lane1_9=0x8 +serdes_driver_current_lane2_9=0x8 +serdes_driver_current_lane3_9=0x8 +serdes_driver_current_lane0_122=0x8 +serdes_driver_current_lane1_122=0x8 +serdes_driver_current_lane2_122=0x8 +serdes_driver_current_lane3_122=0x8 + +#Preemphasis +serdes_preemphasis_42=0x264006 +serdes_preemphasis_43=0x264006 +serdes_preemphasis_44=0x254106 +serdes_preemphasis_45=0x254106 +serdes_preemphasis_50=0x254106 +serdes_preemphasis_51=0x254106 +serdes_preemphasis_52=0x254106 +serdes_preemphasis_53=0x254106 +serdes_preemphasis_54=0x254106 +serdes_preemphasis_55=0x254106 +serdes_preemphasis_56=0x254106 +serdes_preemphasis_57=0x234306 +serdes_preemphasis_68=0x234306 +serdes_preemphasis_69=0x204606 +serdes_preemphasis_70=0x204606 +serdes_preemphasis_71=0x204606 +serdes_preemphasis_34=0x234306 +serdes_preemphasis_35=0x234306 +serdes_preemphasis_36=0x234306 +serdes_preemphasis_37=0x234306 +serdes_preemphasis_38=0x234306 +serdes_preemphasis_39=0x234306 +serdes_preemphasis_40=0x234306 +serdes_preemphasis_41=0x234306 +serdes_preemphasis_72=0x1e4806 +serdes_preemphasis_73=0x1e4806 +serdes_preemphasis_74=0x1e4806 +serdes_preemphasis_75=0x1e4806 +serdes_preemphasis_84=0x1e4806 +serdes_preemphasis_85=0x1a4c06 +serdes_preemphasis_86=0x1a4c06 +serdes_preemphasis_87=0x1b4b06 +serdes_preemphasis_88=0x1b4b06 +serdes_preemphasis_89=0x1e4806 +serdes_preemphasis_90=0x1e4806 +serdes_preemphasis_91=0x1e4806 +serdes_preemphasis_102=0x1e4806 +serdes_preemphasis_103=0x1e4806 +serdes_preemphasis_104=0x1e4806 +serdes_preemphasis_105=0x1e4806 +serdes_preemphasis_106=0x1e4806 +serdes_preemphasis_107=0x1e4806 +serdes_preemphasis_108=0x1e4806 +serdes_preemphasis_109=0x1e4806 +serdes_preemphasis_110=0x1e4806 +serdes_preemphasis_111=0x1d4906 +serdes_preemphasis_112=0x234306 +serdes_preemphasis_113=0x1f4706 +serdes_preemphasis_lane0_5=0x294106 +serdes_preemphasis_lane1_5=0x294106 +serdes_preemphasis_lane2_5=0x294106 +serdes_preemphasis_lane3_5=0x294106 +serdes_preemphasis_lane0_1=0x294106 +serdes_preemphasis_lane1_1=0x294106 +serdes_preemphasis_lane2_1=0x294106 +serdes_preemphasis_lane3_1=0x294106 +serdes_preemphasis_lane0_114=0x2a4006 +serdes_preemphasis_lane1_114=0x2a4006 +serdes_preemphasis_lane2_114=0x2a4006 +serdes_preemphasis_lane3_114=0x2a4006 +serdes_preemphasis_lane0_21=0x2c3c08 +serdes_preemphasis_lane1_21=0x2a4006 +serdes_preemphasis_lane2_21=0x2a4006 +serdes_preemphasis_lane3_21=0x2a4006 +serdes_preemphasis_lane0_9=0x284206 +serdes_preemphasis_lane1_9=0x284206 +serdes_preemphasis_lane2_9=0x284206 +serdes_preemphasis_lane3_9=0x284206 +serdes_preemphasis_lane0_122=0x283e06 +serdes_preemphasis_lane1_122=0x283e06 +serdes_preemphasis_lane2_122=0x283e06 +serdes_preemphasis_lane3_122=0x294601 diff --git a/device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/sai.profile b/device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/sai.profile index dc74eef4d54b..28953a08f205 100644 --- a/device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/sai.profile +++ b/device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-as7712-32x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-as7712-32x100G.config.bcm diff --git a/device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/th-as7712-32x100G.config.bcm b/device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/th-as7712-32x100G.config.bcm new file mode 100644 index 000000000000..09d97c5e4c63 --- /dev/null +++ b/device/accton/x86_64-accton_as7712_32x-r0/Accton-AS7712-32X/th-as7712-32x100G.config.bcm @@ -0,0 +1,570 @@ +# accton_as7712_32x 32x100G SDK config +os=unix +schan_intr_enable=0 +l2_mem_entries=40960 +l2xmsg_mode=1 +l3_mem_entries=40960 +parity_correction=0 +parity_enable=0 +mmu_lossless=1 + +pbmp_oversubscribe=0x444444441111111104444444422222222 +pbmp_xport_xe=0x444444451111111144444444422222222 + +# +arl_clean_timeout_usec=15000000 +asf_mem_profile=2 +bcm_num_cos=8 +bcm_stat_flags=1 +bcm_stat_jumbo=9236 +cdma_timeout_usec=15000000 +dma_desc_timeout_usec=15000000 +ipv6_lpm_128b_enable=1 +l3_alpm_enable=2 +lpm_scaling_enable=0 +max_vp_lags=0 +miim_intr_enable=0 +oversubscribe_mode=1 + +# portmap_0=x:xx +#FC0 +portmap_1=1:100 + +#FC1 +portmap_5=5:100 + +#FC2 +portmap_9=9:100 + +#FC3 +portmap_13=13:100 + +#FC4 +portmap_17=17:100 + +#FC5 +portmap_21=21:100 + +#FC6 +portmap_25=25:100 + +#FC7 +portmap_29=29:100 + +# Tile-1 +#FC8 +portmap_34=33:100 + +#FC9 +portmap_38=37:100 + +#FC10 +portmap_42=41:100 + +#FC11 +portmap_46=45:100 + +#FC12 +portmap_50=49:100 + +#FC13 +portmap_54=53:100 + +#FC14 +portmap_58=57:100 + +#FC15 +portmap_62=61:100 + +#TSC-E Management port 1 +#portmap_66=129:10 +#portmap_67=133:10 + +# Tile-2 +#FC16 +portmap_68=65:100 + +#FC17 +portmap_72=69:100 + +#FC18 +portmap_76=73:100 + +#FC19 +portmap_80=77:100 + +#FC20 +portmap_84=81:100 + +#FC21 +portmap_88=85:100 + +#FC22 +portmap_92=89:100 + +#FC23 +portmap_96=93:100 + +#TSC-E Management port 2 +#portmap_100=131:10 +#portmap_101=134:10 + +# Tile-3 +#FC24 +portmap_102=97:100 + +#FC25 +portmap_106=101:100 + +#FC26 +portmap_110=105:100 + +#FC27 +portmap_114=109:100 + +#FC28 +portmap_118=113:100 + +#FC29 +portmap_122=117:100 + +#FC30 +portmap_126=121:100 + +#FC31 +portmap_130=125:100 + + + +## TX/RX Lane Swap +######### +# port5 # +# FC16 # +######### +xgxs_tx_lane_map_68=0x0123 +xgxs_rx_lane_map_68=0x0123 + +######### +# port8 # +# FC19 # +######### +xgxs_tx_lane_map_80=0x0123 +xgxs_rx_lane_map_80=0x0123 + +######### +# port13# +# FC20 # +######### +xgxs_tx_lane_map_84=0x1032 +xgxs_rx_lane_map_84=0x1032 + +######### +# port14# +# FC21 # +######### +xgxs_tx_lane_map_88=0x0123 +xgxs_rx_lane_map_88=0x0123 + +######### +# port15# +# FC22 # +######### +xgxs_tx_lane_map_92=0x1032 +xgxs_rx_lane_map_92=0x1032 + +######### +# port17# +# FC24 # +######### +xgxs_tx_lane_map_102=0x1032 +xgxs_rx_lane_map_102=0x1032 + +######### +# port18# +# FC25 # +######### +xgxs_tx_lane_map_106=0x0123 +xgxs_rx_lane_map_106=0x0123 + +######### +# port19# +# FC26 # +######### +xgxs_tx_lane_map_110=0x1032 +xgxs_rx_lane_map_110=0x1032 + +######### +# port20# +# FC27 # +######### +xgxs_tx_lane_map_114=0x0123 +xgxs_rx_lane_map_114=0x0123 + +######### +# port26# +# FC29 # +######### +xgxs_tx_lane_map_122=0x0123 +xgxs_rx_lane_map_122=0x0123 + +######### +# port27# +# FC30 # +######### +xgxs_tx_lane_map_126=0x0123 +xgxs_rx_lane_map_126=0x0123 + +######### +# port29# +# FC0 # +######### +xgxs_tx_lane_map_1=0x0123 +xgxs_rx_lane_map_1=0x0123 + +# port30# +# FC1 # +######### +xgxs_tx_lane_map_5=0x0123 +xgxs_rx_lane_map_5=0x0123 + +######### +# port31# +# FC2 # +######### +xgxs_tx_lane_map_9=0x0123 +xgxs_rx_lane_map_9=0x0123 + +######### +# port32# +# FC3 # +######### +xgxs_tx_lane_map_13=0x0123 +xgxs_rx_lane_map_13=0x0123 + + +## RX / TX Serdes lane polarity flip list +## RX / TX Serdes lane polarity flip list +######### +# FC4 # +# port21 # +######### +phy_xaui_tx_polarity_flip_17=0xf + +######### +# FC20 # +# port13 # +######### +phy_xaui_rx_polarity_flip_84=0xf +phy_xaui_tx_polarity_flip_84=0x6 + +######### +# FC21 # +# port14 # +######### +phy_xaui_rx_polarity_flip_88=0xf + +######### +# FC22 # +# port15 # +######### +phy_xaui_rx_polarity_flip_92=0xf +phy_xaui_tx_polarity_flip_92=0xe + + +######### +# FC23 # +# port16 # +######### +phy_xaui_tx_polarity_flip_96=0x1 + +######### +# FC24 # +# port17 # +######### +phy_xaui_tx_polarity_flip_102=0x1 + + +######### +# FC25 # +# port18 # +######### +phy_xaui_rx_polarity_flip_106=0xf + +######### +# FC26 # +# port19 # +######### +phy_xaui_tx_polarity_flip_110=0xe + +######### +# FC27 # +# port20 # +######### +phy_xaui_rx_polarity_flip_114=0x2 + +######### +# FC28 # +# port25 # +######### +phy_xaui_rx_polarity_flip_118=0xa +phy_xaui_tx_polarity_flip_118=0xf + +#Driver Current +serdes_driver_current_lane0_1=0x8 +serdes_driver_current_lane1_1=0x8 +serdes_driver_current_lane2_1=0x8 +serdes_driver_current_lane3_1=0x8 +serdes_driver_current_lane0_5=0x8 +serdes_driver_current_lane1_5=0x8 +serdes_driver_current_lane2_5=0x8 +serdes_driver_current_lane3_5=0x8 +serdes_driver_current_lane0_9=0x8 +serdes_driver_current_lane1_9=0x8 +serdes_driver_current_lane2_9=0x8 +serdes_driver_current_lane3_9=0x8 +serdes_driver_current_lane0_13=0x8 +serdes_driver_current_lane1_13=0x8 +serdes_driver_current_lane2_13=0x8 +serdes_driver_current_lane3_13=0x8 +serdes_driver_current_lane0_17=0x8 +serdes_driver_current_lane1_17=0x8 +serdes_driver_current_lane2_17=0x8 +serdes_driver_current_lane3_17=0x8 +serdes_driver_current_lane0_21=0x8 +serdes_driver_current_lane1_21=0x8 +serdes_driver_current_lane2_21=0x8 +serdes_driver_current_lane3_21=0x8 +serdes_driver_current_lane0_25=0x8 +serdes_driver_current_lane1_25=0x8 +serdes_driver_current_lane2_25=0x8 +serdes_driver_current_lane3_25=0x8 +serdes_driver_current_lane0_29=0x8 +serdes_driver_current_lane1_29=0x8 +serdes_driver_current_lane2_29=0x8 +serdes_driver_current_lane3_29=0x8 +serdes_driver_current_lane0_34=0x8 +serdes_driver_current_lane1_34=0x8 +serdes_driver_current_lane2_34=0x8 +serdes_driver_current_lane3_34=0x8 +serdes_driver_current_lane0_38=0x8 +serdes_driver_current_lane1_38=0x8 +serdes_driver_current_lane2_38=0x8 +serdes_driver_current_lane3_38=0x8 +serdes_driver_current_lane0_42=0x8 +serdes_driver_current_lane1_42=0x8 +serdes_driver_current_lane2_42=0x8 +serdes_driver_current_lane3_42=0x8 +serdes_driver_current_lane0_46=0x8 +serdes_driver_current_lane1_46=0x8 +serdes_driver_current_lane2_46=0x8 +serdes_driver_current_lane3_46=0x8 +serdes_driver_current_lane0_50=0x8 +serdes_driver_current_lane1_50=0x8 +serdes_driver_current_lane2_50=0x8 +serdes_driver_current_lane3_50=0x8 +serdes_driver_current_lane0_54=0x8 +serdes_driver_current_lane1_54=0x8 +serdes_driver_current_lane2_54=0x8 +serdes_driver_current_lane3_54=0x8 +serdes_driver_current_lane0_58=0x8 +serdes_driver_current_lane1_58=0x8 +serdes_driver_current_lane2_58=0x8 +serdes_driver_current_lane3_58=0x8 +serdes_driver_current_lane0_62=0x8 +serdes_driver_current_lane1_62=0x8 +serdes_driver_current_lane2_62=0x8 +serdes_driver_current_lane3_62=0x8 +serdes_driver_current_lane0_68=0x8 +serdes_driver_current_lane1_68=0x8 +serdes_driver_current_lane2_68=0x8 +serdes_driver_current_lane3_68=0x8 +serdes_driver_current_lane0_72=0x8 +serdes_driver_current_lane1_72=0x8 +serdes_driver_current_lane2_72=0x8 +serdes_driver_current_lane3_72=0x8 +serdes_driver_current_lane0_76=0x8 +serdes_driver_current_lane1_76=0x8 +serdes_driver_current_lane2_76=0x8 +serdes_driver_current_lane3_76=0x8 +serdes_driver_current_lane0_80=0x8 +serdes_driver_current_lane1_80=0x8 +serdes_driver_current_lane2_80=0x8 +serdes_driver_current_lane3_80=0x8 +serdes_driver_current_lane0_84=0x8 +serdes_driver_current_lane1_84=0x8 +serdes_driver_current_lane2_84=0x8 +serdes_driver_current_lane3_84=0x8 +serdes_driver_current_lane0_88=0x8 +serdes_driver_current_lane1_88=0x8 +serdes_driver_current_lane2_88=0x8 +serdes_driver_current_lane3_88=0x8 +serdes_driver_current_lane0_92=0x8 +serdes_driver_current_lane1_92=0x8 +serdes_driver_current_lane2_92=0x8 +serdes_driver_current_lane3_92=0x8 +serdes_driver_current_lane0_96=0x8 +serdes_driver_current_lane1_96=0x8 +serdes_driver_current_lane2_96=0x8 +serdes_driver_current_lane3_96=0x8 +serdes_driver_current_lane0_102=0x8 +serdes_driver_current_lane1_102=0x8 +serdes_driver_current_lane2_102=0x8 +serdes_driver_current_lane3_102=0x8 +serdes_driver_current_lane0_106=0x8 +serdes_driver_current_lane1_106=0x8 +serdes_driver_current_lane2_106=0x8 +serdes_driver_current_lane3_106=0x8 +serdes_driver_current_lane0_110=0x8 +serdes_driver_current_lane1_110=0x8 +serdes_driver_current_lane2_110=0x8 +serdes_driver_current_lane3_110=0x8 +serdes_driver_current_lane0_114=0x8 +serdes_driver_current_lane1_114=0x8 +serdes_driver_current_lane2_114=0x8 +serdes_driver_current_lane3_114=0x8 +serdes_driver_current_lane0_118=0x8 +serdes_driver_current_lane1_118=0x8 +serdes_driver_current_lane2_118=0x8 +serdes_driver_current_lane3_118=0x8 +serdes_driver_current_lane0_122=0x8 +serdes_driver_current_lane1_122=0x8 +serdes_driver_current_lane2_122=0x8 +serdes_driver_current_lane3_122=0x8 +serdes_driver_current_lane0_126=0x8 +serdes_driver_current_lane1_126=0x8 +serdes_driver_current_lane2_126=0x8 +serdes_driver_current_lane3_126=0x8 +serdes_driver_current_lane0_130=0x8 +serdes_driver_current_lane1_130=0x8 +serdes_driver_current_lane2_130=0x8 +serdes_driver_current_lane3_130=0x8 + +#Preemphasis +serdes_preemphasis_lane0_1=0x264204 +serdes_preemphasis_lane1_1=0x264204 +serdes_preemphasis_lane2_1=0x264204 +serdes_preemphasis_lane3_1=0x264204 +serdes_preemphasis_lane0_5=0x224406 +serdes_preemphasis_lane1_5=0x224406 +serdes_preemphasis_lane2_5=0x264204 +serdes_preemphasis_lane3_5=0x244206 +serdes_preemphasis_lane0_9=0x204606 +serdes_preemphasis_lane1_9=0x264204 +serdes_preemphasis_lane2_9=0x204606 +serdes_preemphasis_lane3_9=0x224406 +serdes_preemphasis_lane0_13=0x204606 +serdes_preemphasis_lane1_13=0x224406 +serdes_preemphasis_lane2_13=0x224406 +serdes_preemphasis_lane3_13=0x244206 +serdes_preemphasis_lane0_17=0x204606 +serdes_preemphasis_lane1_17=0x204606 +serdes_preemphasis_lane2_17=0x204606 +serdes_preemphasis_lane3_17=0x204606 +serdes_preemphasis_lane0_21=0x204606 +serdes_preemphasis_lane1_21=0x204606 +serdes_preemphasis_lane2_21=0x204606 +serdes_preemphasis_lane3_21=0x224406 +serdes_preemphasis_lane0_25=0x204606 +serdes_preemphasis_lane1_25=0x204606 +serdes_preemphasis_lane2_25=0x204606 +serdes_preemphasis_lane3_25=0x204606 +serdes_preemphasis_lane0_29=0x204606 +serdes_preemphasis_lane1_29=0x204606 +serdes_preemphasis_lane2_29=0x204606 +serdes_preemphasis_lane3_29=0x204606 +serdes_preemphasis_lane0_34=0x284601 +serdes_preemphasis_lane1_34=0x284601 +serdes_preemphasis_lane2_34=0x284601 +serdes_preemphasis_lane3_34=0x284601 +serdes_preemphasis_lane0_38=0x204604 +serdes_preemphasis_lane1_38=0x204604 +serdes_preemphasis_lane2_38=0x224406 +serdes_preemphasis_lane3_38=0x224406 +serdes_preemphasis_lane0_42=0x284601 +serdes_preemphasis_lane1_42=0x294501 +serdes_preemphasis_lane2_42=0x284601 +serdes_preemphasis_lane3_42=0x284601 +serdes_preemphasis_lane0_46=0x204802 +serdes_preemphasis_lane1_46=0x204802 +serdes_preemphasis_lane2_46=0x204802 +serdes_preemphasis_lane3_46=0x204802 +serdes_preemphasis_lane0_50=0x1e4f01 +serdes_preemphasis_lane1_50=0x1e4d01 +serdes_preemphasis_lane2_50=0x1e4f01 +serdes_preemphasis_lane3_50=0x1e4f01 +serdes_preemphasis_lane0_54=0x1f4a03 +serdes_preemphasis_lane1_54=0x1f4a03 +serdes_preemphasis_lane2_54=0x1f4a03 +serdes_preemphasis_lane3_54=0x1f4a03 +serdes_preemphasis_lane0_58=0x1e4f01 +serdes_preemphasis_lane1_58=0x1e4f01 +serdes_preemphasis_lane2_58=0x1e4f01 +serdes_preemphasis_lane3_58=0x1e4f01 +serdes_preemphasis_lane0_62=0x1e4e02 +serdes_preemphasis_lane1_62=0x1e4e02 +serdes_preemphasis_lane2_62=0x1e4e02 +serdes_preemphasis_lane3_62=0x1e4e02 +serdes_preemphasis_lane0_68=0x1e4f01 +serdes_preemphasis_lane1_68=0x1e4f01 +serdes_preemphasis_lane2_68=0x1e4f01 +serdes_preemphasis_lane3_68=0x1e4f01 +serdes_preemphasis_lane0_72=0x1e4e02 +serdes_preemphasis_lane1_72=0x1e4e02 +serdes_preemphasis_lane2_72=0x1e4e02 +serdes_preemphasis_lane3_72=0x1e4e02 +serdes_preemphasis_lane0_76=0x1c4d02 +serdes_preemphasis_lane1_76=0x195002 +serdes_preemphasis_lane2_76=0x195002 +serdes_preemphasis_lane3_76=0x195002 +serdes_preemphasis_lane0_80=0x1e4e02 +serdes_preemphasis_lane1_80=0x1e4e02 +serdes_preemphasis_lane2_80=0x1e4e02 +serdes_preemphasis_lane3_80=0x1e4e02 +serdes_preemphasis_lane0_84=0x234701 +serdes_preemphasis_lane1_84=0x234701 +serdes_preemphasis_lane2_84=0x234701 +serdes_preemphasis_lane3_84=0x234701 +serdes_preemphasis_lane0_88=0x224802 +serdes_preemphasis_lane1_88=0x224602 +serdes_preemphasis_lane2_88=0x224802 +serdes_preemphasis_lane3_88=0x224802 +serdes_preemphasis_lane0_92=0x234801 +serdes_preemphasis_lane1_92=0x244701 +serdes_preemphasis_lane2_92=0x234801 +serdes_preemphasis_lane3_92=0x234601 +serdes_preemphasis_lane0_96=0x204406 +serdes_preemphasis_lane1_96=0x204406 +serdes_preemphasis_lane2_96=0x204406 +serdes_preemphasis_lane3_96=0x224602 +serdes_preemphasis_lane0_102=0x204606 +serdes_preemphasis_lane1_102=0x235002 +serdes_preemphasis_lane2_102=0x204606 +serdes_preemphasis_lane3_102=0x204606 +serdes_preemphasis_lane0_106=0x204606 +serdes_preemphasis_lane1_106=0x204606 +serdes_preemphasis_lane2_106=0x204606 +serdes_preemphasis_lane3_106=0x204606 +serdes_preemphasis_lane0_110=0x204606 +serdes_preemphasis_lane1_110=0x224406 +serdes_preemphasis_lane2_110=0x224406 +serdes_preemphasis_lane3_110=0x224406 +serdes_preemphasis_lane0_114=0x224406 +serdes_preemphasis_lane1_114=0x204606 +serdes_preemphasis_lane2_114=0x204606 +serdes_preemphasis_lane3_114=0x224406 +serdes_preemphasis_lane0_118=0x224406 +serdes_preemphasis_lane1_118=0x224406 +serdes_preemphasis_lane2_118=0x224406 +serdes_preemphasis_lane3_118=0x224406 +serdes_preemphasis_lane0_122=0x244404 +serdes_preemphasis_lane1_122=0x244404 +serdes_preemphasis_lane2_122=0x244404 +serdes_preemphasis_lane3_122=0x244404 +serdes_preemphasis_lane0_126=0x234504 +serdes_preemphasis_lane1_126=0x234404 +serdes_preemphasis_lane2_126=0x224406 +serdes_preemphasis_lane3_126=0x224406 +serdes_preemphasis_lane0_130=0x244404 +serdes_preemphasis_lane1_130=0x244404 +serdes_preemphasis_lane2_130=0x234504 +serdes_preemphasis_lane3_130=0x264501 diff --git a/device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/sai.profile b/device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/sai.profile index de1e16b49544..65944732653c 100644 --- a/device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/sai.profile +++ b/device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-as7716-32x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-as7716-32x100G.config.bcm diff --git a/device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/th-as7716-32x100G.config.bcm b/device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/th-as7716-32x100G.config.bcm new file mode 100644 index 000000000000..1231bf302be7 --- /dev/null +++ b/device/accton/x86_64-accton_as7716_32x-r0/Accton-AS7716-32X/th-as7716-32x100G.config.bcm @@ -0,0 +1,570 @@ +# accton_as7716_32x 32x100G SDK config +os=unix +schan_intr_enable=0 +l2_mem_entries=40960 +l2xmsg_mode=1 +l3_mem_entries=40960 +parity_correction=0 +parity_enable=0 +mmu_lossless=1 + +pbmp_oversubscribe=0x444444441111111104444444422222222 +pbmp_xport_xe=0x444444451111111144444444422222222 + +# +arl_clean_timeout_usec=15000000 +asf_mem_profile=2 +bcm_num_cos=8 +bcm_stat_flags=1 +bcm_stat_jumbo=9236 +cdma_timeout_usec=15000000 +dma_desc_timeout_usec=15000000 +ipv6_lpm_128b_enable=1 +l3_alpm_enable=2 +lpm_scaling_enable=0 +max_vp_lags=0 +miim_intr_enable=0 +oversubscribe_mode=1 + +# portmap_0=x:xx +#FC0 +portmap_1=1:100 + +#FC1 +portmap_5=5:100 + +#FC2 +portmap_9=9:100 + +#FC3 +portmap_13=13:100 + +#FC4 +portmap_17=17:100 + +#FC5 +portmap_21=21:100 + +#FC6 +portmap_25=25:100 + +#FC7 +portmap_29=29:100 + +# Tile-1 +#FC8 +portmap_34=33:100 + +#FC9 +portmap_38=37:100 + +#FC10 +portmap_42=41:100 + +#FC11 +portmap_46=45:100 + +#FC12 +portmap_50=49:100 + +#FC13 +portmap_54=53:100 + +#FC14 +portmap_58=57:100 + +#FC15 +portmap_62=61:100 + +#TSC-E Management port 1 +#portmap_66=129:10 +#portmap_67=133:10 + +# Tile-2 +#FC16 +portmap_68=65:100 + +#FC17 +portmap_72=69:100 + +#FC18 +portmap_76=73:100 + +#FC19 +portmap_80=77:100 + +#FC20 +portmap_84=81:100 + +#FC21 +portmap_88=85:100 + +#FC22 +portmap_92=89:100 + +#FC23 +portmap_96=93:100 + +#TSC-E Management port 2 +#portmap_100=131:10 +#portmap_101=134:10 + +# Tile-3 +#FC24 +portmap_102=97:100 + +#FC25 +portmap_106=101:100 + +#FC26 +portmap_110=105:100 + +#FC27 +portmap_114=109:100 + +#FC28 +portmap_118=113:100 + +#FC29 +portmap_122=117:100 + +#FC30 +portmap_126=121:100 + +#FC31 +portmap_130=125:100 + + + +## TX/RX Lane Swap +######### +# port5 # +# FC16 # +######### +xgxs_tx_lane_map_68=0x0123 +xgxs_rx_lane_map_68=0x0123 + +######### +# port8 # +# FC19 # +######### +xgxs_tx_lane_map_80=0x0123 +xgxs_rx_lane_map_80=0x0123 + +######### +# port13# +# FC20 # +######### +xgxs_tx_lane_map_84=0x1032 +xgxs_rx_lane_map_84=0x1032 + +######### +# port14# +# FC21 # +######### +xgxs_tx_lane_map_88=0x0123 +xgxs_rx_lane_map_88=0x0123 + +######### +# port15# +# FC22 # +######### +xgxs_tx_lane_map_92=0x1032 +xgxs_rx_lane_map_92=0x1032 + +######### +# port17# +# FC24 # +######### +xgxs_tx_lane_map_102=0x1032 +xgxs_rx_lane_map_102=0x1032 + +######### +# port18# +# FC25 # +######### +xgxs_tx_lane_map_106=0x0123 +xgxs_rx_lane_map_106=0x0123 + +######### +# port19# +# FC26 # +######### +xgxs_tx_lane_map_110=0x1032 +xgxs_rx_lane_map_110=0x1032 + +######### +# port20# +# FC27 # +######### +xgxs_tx_lane_map_114=0x0123 +xgxs_rx_lane_map_114=0x0123 + +######### +# port26# +# FC29 # +######### +xgxs_tx_lane_map_122=0x0123 +xgxs_rx_lane_map_122=0x0123 + +######### +# port27# +# FC30 # +######### +xgxs_tx_lane_map_126=0x0123 +xgxs_rx_lane_map_126=0x0123 + +######### +# port29# +# FC0 # +######### +xgxs_tx_lane_map_1=0x0123 +xgxs_rx_lane_map_1=0x0123 + +# port30# +# FC1 # +######### +xgxs_tx_lane_map_5=0x0123 +xgxs_rx_lane_map_5=0x0123 + +######### +# port31# +# FC2 # +######### +xgxs_tx_lane_map_9=0x0123 +xgxs_rx_lane_map_9=0x0123 + +######### +# port32# +# FC3 # +######### +xgxs_tx_lane_map_13=0x0123 +xgxs_rx_lane_map_13=0x0123 + + +## RX / TX Serdes lane polarity flip list +## RX / TX Serdes lane polarity flip list +######### +# FC4 # +# port21 # +######### +phy_xaui_tx_polarity_flip_17=0xf + +######### +# FC20 # +# port13 # +######### +phy_xaui_rx_polarity_flip_84=0xf +phy_xaui_tx_polarity_flip_84=0x6 + +######### +# FC21 # +# port14 # +######### +phy_xaui_rx_polarity_flip_88=0xf + +######### +# FC22 # +# port15 # +######### +phy_xaui_rx_polarity_flip_92=0xf +phy_xaui_tx_polarity_flip_92=0xe + + +######### +# FC23 # +# port16 # +######### +phy_xaui_tx_polarity_flip_96=0x1 + +######### +# FC24 # +# port17 # +######### +phy_xaui_tx_polarity_flip_102=0x1 + + +######### +# FC25 # +# port18 # +######### +phy_xaui_rx_polarity_flip_106=0xf + +######### +# FC26 # +# port19 # +######### +phy_xaui_tx_polarity_flip_110=0xe + +######### +# FC27 # +# port20 # +######### +phy_xaui_rx_polarity_flip_114=0x2 + +######### +# FC28 # +# port25 # +######### +phy_xaui_rx_polarity_flip_118=0xa +phy_xaui_tx_polarity_flip_118=0xf + +#Driver Current +serdes_driver_current_lane0_1=0x8 +serdes_driver_current_lane1_1=0x8 +serdes_driver_current_lane2_1=0x8 +serdes_driver_current_lane3_1=0x8 +serdes_driver_current_lane0_5=0x8 +serdes_driver_current_lane1_5=0x8 +serdes_driver_current_lane2_5=0x8 +serdes_driver_current_lane3_5=0x8 +serdes_driver_current_lane0_9=0x8 +serdes_driver_current_lane1_9=0x8 +serdes_driver_current_lane2_9=0x8 +serdes_driver_current_lane3_9=0x8 +serdes_driver_current_lane0_13=0x8 +serdes_driver_current_lane1_13=0x8 +serdes_driver_current_lane2_13=0x8 +serdes_driver_current_lane3_13=0x8 +serdes_driver_current_lane0_17=0x8 +serdes_driver_current_lane1_17=0x8 +serdes_driver_current_lane2_17=0x8 +serdes_driver_current_lane3_17=0x8 +serdes_driver_current_lane0_21=0x8 +serdes_driver_current_lane1_21=0x8 +serdes_driver_current_lane2_21=0x8 +serdes_driver_current_lane3_21=0x8 +serdes_driver_current_lane0_25=0x8 +serdes_driver_current_lane1_25=0x8 +serdes_driver_current_lane2_25=0x8 +serdes_driver_current_lane3_25=0x8 +serdes_driver_current_lane0_29=0x8 +serdes_driver_current_lane1_29=0x8 +serdes_driver_current_lane2_29=0x8 +serdes_driver_current_lane3_29=0x8 +serdes_driver_current_lane0_34=0x8 +serdes_driver_current_lane1_34=0x8 +serdes_driver_current_lane2_34=0x8 +serdes_driver_current_lane3_34=0x8 +serdes_driver_current_lane0_38=0x8 +serdes_driver_current_lane1_38=0x8 +serdes_driver_current_lane2_38=0x8 +serdes_driver_current_lane3_38=0x8 +serdes_driver_current_lane0_42=0x8 +serdes_driver_current_lane1_42=0x8 +serdes_driver_current_lane2_42=0x8 +serdes_driver_current_lane3_42=0x8 +serdes_driver_current_lane0_46=0x8 +serdes_driver_current_lane1_46=0x8 +serdes_driver_current_lane2_46=0x8 +serdes_driver_current_lane3_46=0x8 +serdes_driver_current_lane0_50=0x8 +serdes_driver_current_lane1_50=0x8 +serdes_driver_current_lane2_50=0x8 +serdes_driver_current_lane3_50=0x8 +serdes_driver_current_lane0_54=0x8 +serdes_driver_current_lane1_54=0x8 +serdes_driver_current_lane2_54=0x8 +serdes_driver_current_lane3_54=0x8 +serdes_driver_current_lane0_58=0x8 +serdes_driver_current_lane1_58=0x8 +serdes_driver_current_lane2_58=0x8 +serdes_driver_current_lane3_58=0x8 +serdes_driver_current_lane0_62=0x8 +serdes_driver_current_lane1_62=0x8 +serdes_driver_current_lane2_62=0x8 +serdes_driver_current_lane3_62=0x8 +serdes_driver_current_lane0_68=0x8 +serdes_driver_current_lane1_68=0x8 +serdes_driver_current_lane2_68=0x8 +serdes_driver_current_lane3_68=0x8 +serdes_driver_current_lane0_72=0x8 +serdes_driver_current_lane1_72=0x8 +serdes_driver_current_lane2_72=0x8 +serdes_driver_current_lane3_72=0x8 +serdes_driver_current_lane0_76=0x8 +serdes_driver_current_lane1_76=0x8 +serdes_driver_current_lane2_76=0x8 +serdes_driver_current_lane3_76=0x8 +serdes_driver_current_lane0_80=0x8 +serdes_driver_current_lane1_80=0x8 +serdes_driver_current_lane2_80=0x8 +serdes_driver_current_lane3_80=0x8 +serdes_driver_current_lane0_84=0x8 +serdes_driver_current_lane1_84=0x8 +serdes_driver_current_lane2_84=0x8 +serdes_driver_current_lane3_84=0x8 +serdes_driver_current_lane0_88=0x8 +serdes_driver_current_lane1_88=0x8 +serdes_driver_current_lane2_88=0x8 +serdes_driver_current_lane3_88=0x8 +serdes_driver_current_lane0_92=0x8 +serdes_driver_current_lane1_92=0x8 +serdes_driver_current_lane2_92=0x8 +serdes_driver_current_lane3_92=0x8 +serdes_driver_current_lane0_96=0x8 +serdes_driver_current_lane1_96=0x8 +serdes_driver_current_lane2_96=0x8 +serdes_driver_current_lane3_96=0x8 +serdes_driver_current_lane0_102=0x8 +serdes_driver_current_lane1_102=0x8 +serdes_driver_current_lane2_102=0x8 +serdes_driver_current_lane3_102=0x8 +serdes_driver_current_lane0_106=0x8 +serdes_driver_current_lane1_106=0x8 +serdes_driver_current_lane2_106=0x8 +serdes_driver_current_lane3_106=0x8 +serdes_driver_current_lane0_110=0x8 +serdes_driver_current_lane1_110=0x8 +serdes_driver_current_lane2_110=0x8 +serdes_driver_current_lane3_110=0x8 +serdes_driver_current_lane0_114=0x8 +serdes_driver_current_lane1_114=0x8 +serdes_driver_current_lane2_114=0x8 +serdes_driver_current_lane3_114=0x8 +serdes_driver_current_lane0_118=0x8 +serdes_driver_current_lane1_118=0x8 +serdes_driver_current_lane2_118=0x8 +serdes_driver_current_lane3_118=0x8 +serdes_driver_current_lane0_122=0x8 +serdes_driver_current_lane1_122=0x8 +serdes_driver_current_lane2_122=0x8 +serdes_driver_current_lane3_122=0x8 +serdes_driver_current_lane0_126=0x8 +serdes_driver_current_lane1_126=0x8 +serdes_driver_current_lane2_126=0x8 +serdes_driver_current_lane3_126=0x8 +serdes_driver_current_lane0_130=0x8 +serdes_driver_current_lane1_130=0x8 +serdes_driver_current_lane2_130=0x8 +serdes_driver_current_lane3_130=0x8 + +#Preemphasis +serdes_preemphasis_lane0_1=0x264204 +serdes_preemphasis_lane1_1=0x264204 +serdes_preemphasis_lane2_1=0x264204 +serdes_preemphasis_lane3_1=0x264204 +serdes_preemphasis_lane0_5=0x224406 +serdes_preemphasis_lane1_5=0x224406 +serdes_preemphasis_lane2_5=0x264204 +serdes_preemphasis_lane3_5=0x244206 +serdes_preemphasis_lane0_9=0x204606 +serdes_preemphasis_lane1_9=0x264204 +serdes_preemphasis_lane2_9=0x204606 +serdes_preemphasis_lane3_9=0x224406 +serdes_preemphasis_lane0_13=0x204606 +serdes_preemphasis_lane1_13=0x224406 +serdes_preemphasis_lane2_13=0x224406 +serdes_preemphasis_lane3_13=0x244206 +serdes_preemphasis_lane0_17=0x204606 +serdes_preemphasis_lane1_17=0x204606 +serdes_preemphasis_lane2_17=0x204606 +serdes_preemphasis_lane3_17=0x204606 +serdes_preemphasis_lane0_21=0x204606 +serdes_preemphasis_lane1_21=0x204606 +serdes_preemphasis_lane2_21=0x204606 +serdes_preemphasis_lane3_21=0x224406 +serdes_preemphasis_lane0_25=0x204606 +serdes_preemphasis_lane1_25=0x204606 +serdes_preemphasis_lane2_25=0x204606 +serdes_preemphasis_lane3_25=0x204606 +serdes_preemphasis_lane0_29=0x204606 +serdes_preemphasis_lane1_29=0x204606 +serdes_preemphasis_lane2_29=0x204606 +serdes_preemphasis_lane3_29=0x204606 +serdes_preemphasis_lane0_34=0x284601 +serdes_preemphasis_lane1_34=0x284601 +serdes_preemphasis_lane2_34=0x284601 +serdes_preemphasis_lane3_34=0x284601 +serdes_preemphasis_lane0_38=0x204604 +serdes_preemphasis_lane1_38=0x204604 +serdes_preemphasis_lane2_38=0x224406 +serdes_preemphasis_lane3_38=0x224406 +serdes_preemphasis_lane0_42=0x284601 +serdes_preemphasis_lane1_42=0x294501 +serdes_preemphasis_lane2_42=0x284601 +serdes_preemphasis_lane3_42=0x284601 +serdes_preemphasis_lane0_46=0x204802 +serdes_preemphasis_lane1_46=0x204802 +serdes_preemphasis_lane2_46=0x204802 +serdes_preemphasis_lane3_46=0x204802 +serdes_preemphasis_lane0_50=0x1e4f01 +serdes_preemphasis_lane1_50=0x1e4d01 +serdes_preemphasis_lane2_50=0x1e4f01 +serdes_preemphasis_lane3_50=0x1e4f01 +serdes_preemphasis_lane0_54=0x1f4a03 +serdes_preemphasis_lane1_54=0x1f4a03 +serdes_preemphasis_lane2_54=0x1f4a03 +serdes_preemphasis_lane3_54=0x1f4a03 +serdes_preemphasis_lane0_58=0x1e4f01 +serdes_preemphasis_lane1_58=0x1e4f01 +serdes_preemphasis_lane2_58=0x1e4f01 +serdes_preemphasis_lane3_58=0x1e4f01 +serdes_preemphasis_lane0_62=0x1e4e02 +serdes_preemphasis_lane1_62=0x1e4e02 +serdes_preemphasis_lane2_62=0x1e4e02 +serdes_preemphasis_lane3_62=0x1e4e02 +serdes_preemphasis_lane0_68=0x1e4f01 +serdes_preemphasis_lane1_68=0x1e4f01 +serdes_preemphasis_lane2_68=0x1e4f01 +serdes_preemphasis_lane3_68=0x1e4f01 +serdes_preemphasis_lane0_72=0x1e4e02 +serdes_preemphasis_lane1_72=0x1e4e02 +serdes_preemphasis_lane2_72=0x1e4e02 +serdes_preemphasis_lane3_72=0x1e4e02 +serdes_preemphasis_lane0_76=0x1c4d02 +serdes_preemphasis_lane1_76=0x195002 +serdes_preemphasis_lane2_76=0x195002 +serdes_preemphasis_lane3_76=0x195002 +serdes_preemphasis_lane0_80=0x1e4e02 +serdes_preemphasis_lane1_80=0x1e4e02 +serdes_preemphasis_lane2_80=0x1e4e02 +serdes_preemphasis_lane3_80=0x1e4e02 +serdes_preemphasis_lane0_84=0x234701 +serdes_preemphasis_lane1_84=0x234701 +serdes_preemphasis_lane2_84=0x234701 +serdes_preemphasis_lane3_84=0x234701 +serdes_preemphasis_lane0_88=0x224802 +serdes_preemphasis_lane1_88=0x224602 +serdes_preemphasis_lane2_88=0x224802 +serdes_preemphasis_lane3_88=0x224802 +serdes_preemphasis_lane0_92=0x234801 +serdes_preemphasis_lane1_92=0x244701 +serdes_preemphasis_lane2_92=0x234801 +serdes_preemphasis_lane3_92=0x234601 +serdes_preemphasis_lane0_96=0x204406 +serdes_preemphasis_lane1_96=0x204406 +serdes_preemphasis_lane2_96=0x204406 +serdes_preemphasis_lane3_96=0x224602 +serdes_preemphasis_lane0_102=0x204606 +serdes_preemphasis_lane1_102=0x235002 +serdes_preemphasis_lane2_102=0x204606 +serdes_preemphasis_lane3_102=0x204606 +serdes_preemphasis_lane0_106=0x204606 +serdes_preemphasis_lane1_106=0x204606 +serdes_preemphasis_lane2_106=0x204606 +serdes_preemphasis_lane3_106=0x204606 +serdes_preemphasis_lane0_110=0x204606 +serdes_preemphasis_lane1_110=0x224406 +serdes_preemphasis_lane2_110=0x224406 +serdes_preemphasis_lane3_110=0x224406 +serdes_preemphasis_lane0_114=0x224406 +serdes_preemphasis_lane1_114=0x204606 +serdes_preemphasis_lane2_114=0x204606 +serdes_preemphasis_lane3_114=0x224406 +serdes_preemphasis_lane0_118=0x224406 +serdes_preemphasis_lane1_118=0x224406 +serdes_preemphasis_lane2_118=0x224406 +serdes_preemphasis_lane3_118=0x224406 +serdes_preemphasis_lane0_122=0x244404 +serdes_preemphasis_lane1_122=0x244404 +serdes_preemphasis_lane2_122=0x244404 +serdes_preemphasis_lane3_122=0x244404 +serdes_preemphasis_lane0_126=0x234504 +serdes_preemphasis_lane1_126=0x234404 +serdes_preemphasis_lane2_126=0x224406 +serdes_preemphasis_lane3_126=0x224406 +serdes_preemphasis_lane0_130=0x244404 +serdes_preemphasis_lane1_130=0x244404 +serdes_preemphasis_lane2_130=0x234504 +serdes_preemphasis_lane3_130=0x264501 diff --git a/device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/sai.profile b/device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/sai.profile index de1e16b49544..65944732653c 100755 --- a/device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/sai.profile +++ b/device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-as7716-32x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-as7716-32x100G.config.bcm diff --git a/device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/th-as7716-32x100G.config.bcm b/device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/th-as7716-32x100G.config.bcm new file mode 100644 index 000000000000..1231bf302be7 --- /dev/null +++ b/device/accton/x86_64-accton_as7716_32xb-r0/Accton-AS7716-32XB/th-as7716-32x100G.config.bcm @@ -0,0 +1,570 @@ +# accton_as7716_32x 32x100G SDK config +os=unix +schan_intr_enable=0 +l2_mem_entries=40960 +l2xmsg_mode=1 +l3_mem_entries=40960 +parity_correction=0 +parity_enable=0 +mmu_lossless=1 + +pbmp_oversubscribe=0x444444441111111104444444422222222 +pbmp_xport_xe=0x444444451111111144444444422222222 + +# +arl_clean_timeout_usec=15000000 +asf_mem_profile=2 +bcm_num_cos=8 +bcm_stat_flags=1 +bcm_stat_jumbo=9236 +cdma_timeout_usec=15000000 +dma_desc_timeout_usec=15000000 +ipv6_lpm_128b_enable=1 +l3_alpm_enable=2 +lpm_scaling_enable=0 +max_vp_lags=0 +miim_intr_enable=0 +oversubscribe_mode=1 + +# portmap_0=x:xx +#FC0 +portmap_1=1:100 + +#FC1 +portmap_5=5:100 + +#FC2 +portmap_9=9:100 + +#FC3 +portmap_13=13:100 + +#FC4 +portmap_17=17:100 + +#FC5 +portmap_21=21:100 + +#FC6 +portmap_25=25:100 + +#FC7 +portmap_29=29:100 + +# Tile-1 +#FC8 +portmap_34=33:100 + +#FC9 +portmap_38=37:100 + +#FC10 +portmap_42=41:100 + +#FC11 +portmap_46=45:100 + +#FC12 +portmap_50=49:100 + +#FC13 +portmap_54=53:100 + +#FC14 +portmap_58=57:100 + +#FC15 +portmap_62=61:100 + +#TSC-E Management port 1 +#portmap_66=129:10 +#portmap_67=133:10 + +# Tile-2 +#FC16 +portmap_68=65:100 + +#FC17 +portmap_72=69:100 + +#FC18 +portmap_76=73:100 + +#FC19 +portmap_80=77:100 + +#FC20 +portmap_84=81:100 + +#FC21 +portmap_88=85:100 + +#FC22 +portmap_92=89:100 + +#FC23 +portmap_96=93:100 + +#TSC-E Management port 2 +#portmap_100=131:10 +#portmap_101=134:10 + +# Tile-3 +#FC24 +portmap_102=97:100 + +#FC25 +portmap_106=101:100 + +#FC26 +portmap_110=105:100 + +#FC27 +portmap_114=109:100 + +#FC28 +portmap_118=113:100 + +#FC29 +portmap_122=117:100 + +#FC30 +portmap_126=121:100 + +#FC31 +portmap_130=125:100 + + + +## TX/RX Lane Swap +######### +# port5 # +# FC16 # +######### +xgxs_tx_lane_map_68=0x0123 +xgxs_rx_lane_map_68=0x0123 + +######### +# port8 # +# FC19 # +######### +xgxs_tx_lane_map_80=0x0123 +xgxs_rx_lane_map_80=0x0123 + +######### +# port13# +# FC20 # +######### +xgxs_tx_lane_map_84=0x1032 +xgxs_rx_lane_map_84=0x1032 + +######### +# port14# +# FC21 # +######### +xgxs_tx_lane_map_88=0x0123 +xgxs_rx_lane_map_88=0x0123 + +######### +# port15# +# FC22 # +######### +xgxs_tx_lane_map_92=0x1032 +xgxs_rx_lane_map_92=0x1032 + +######### +# port17# +# FC24 # +######### +xgxs_tx_lane_map_102=0x1032 +xgxs_rx_lane_map_102=0x1032 + +######### +# port18# +# FC25 # +######### +xgxs_tx_lane_map_106=0x0123 +xgxs_rx_lane_map_106=0x0123 + +######### +# port19# +# FC26 # +######### +xgxs_tx_lane_map_110=0x1032 +xgxs_rx_lane_map_110=0x1032 + +######### +# port20# +# FC27 # +######### +xgxs_tx_lane_map_114=0x0123 +xgxs_rx_lane_map_114=0x0123 + +######### +# port26# +# FC29 # +######### +xgxs_tx_lane_map_122=0x0123 +xgxs_rx_lane_map_122=0x0123 + +######### +# port27# +# FC30 # +######### +xgxs_tx_lane_map_126=0x0123 +xgxs_rx_lane_map_126=0x0123 + +######### +# port29# +# FC0 # +######### +xgxs_tx_lane_map_1=0x0123 +xgxs_rx_lane_map_1=0x0123 + +# port30# +# FC1 # +######### +xgxs_tx_lane_map_5=0x0123 +xgxs_rx_lane_map_5=0x0123 + +######### +# port31# +# FC2 # +######### +xgxs_tx_lane_map_9=0x0123 +xgxs_rx_lane_map_9=0x0123 + +######### +# port32# +# FC3 # +######### +xgxs_tx_lane_map_13=0x0123 +xgxs_rx_lane_map_13=0x0123 + + +## RX / TX Serdes lane polarity flip list +## RX / TX Serdes lane polarity flip list +######### +# FC4 # +# port21 # +######### +phy_xaui_tx_polarity_flip_17=0xf + +######### +# FC20 # +# port13 # +######### +phy_xaui_rx_polarity_flip_84=0xf +phy_xaui_tx_polarity_flip_84=0x6 + +######### +# FC21 # +# port14 # +######### +phy_xaui_rx_polarity_flip_88=0xf + +######### +# FC22 # +# port15 # +######### +phy_xaui_rx_polarity_flip_92=0xf +phy_xaui_tx_polarity_flip_92=0xe + + +######### +# FC23 # +# port16 # +######### +phy_xaui_tx_polarity_flip_96=0x1 + +######### +# FC24 # +# port17 # +######### +phy_xaui_tx_polarity_flip_102=0x1 + + +######### +# FC25 # +# port18 # +######### +phy_xaui_rx_polarity_flip_106=0xf + +######### +# FC26 # +# port19 # +######### +phy_xaui_tx_polarity_flip_110=0xe + +######### +# FC27 # +# port20 # +######### +phy_xaui_rx_polarity_flip_114=0x2 + +######### +# FC28 # +# port25 # +######### +phy_xaui_rx_polarity_flip_118=0xa +phy_xaui_tx_polarity_flip_118=0xf + +#Driver Current +serdes_driver_current_lane0_1=0x8 +serdes_driver_current_lane1_1=0x8 +serdes_driver_current_lane2_1=0x8 +serdes_driver_current_lane3_1=0x8 +serdes_driver_current_lane0_5=0x8 +serdes_driver_current_lane1_5=0x8 +serdes_driver_current_lane2_5=0x8 +serdes_driver_current_lane3_5=0x8 +serdes_driver_current_lane0_9=0x8 +serdes_driver_current_lane1_9=0x8 +serdes_driver_current_lane2_9=0x8 +serdes_driver_current_lane3_9=0x8 +serdes_driver_current_lane0_13=0x8 +serdes_driver_current_lane1_13=0x8 +serdes_driver_current_lane2_13=0x8 +serdes_driver_current_lane3_13=0x8 +serdes_driver_current_lane0_17=0x8 +serdes_driver_current_lane1_17=0x8 +serdes_driver_current_lane2_17=0x8 +serdes_driver_current_lane3_17=0x8 +serdes_driver_current_lane0_21=0x8 +serdes_driver_current_lane1_21=0x8 +serdes_driver_current_lane2_21=0x8 +serdes_driver_current_lane3_21=0x8 +serdes_driver_current_lane0_25=0x8 +serdes_driver_current_lane1_25=0x8 +serdes_driver_current_lane2_25=0x8 +serdes_driver_current_lane3_25=0x8 +serdes_driver_current_lane0_29=0x8 +serdes_driver_current_lane1_29=0x8 +serdes_driver_current_lane2_29=0x8 +serdes_driver_current_lane3_29=0x8 +serdes_driver_current_lane0_34=0x8 +serdes_driver_current_lane1_34=0x8 +serdes_driver_current_lane2_34=0x8 +serdes_driver_current_lane3_34=0x8 +serdes_driver_current_lane0_38=0x8 +serdes_driver_current_lane1_38=0x8 +serdes_driver_current_lane2_38=0x8 +serdes_driver_current_lane3_38=0x8 +serdes_driver_current_lane0_42=0x8 +serdes_driver_current_lane1_42=0x8 +serdes_driver_current_lane2_42=0x8 +serdes_driver_current_lane3_42=0x8 +serdes_driver_current_lane0_46=0x8 +serdes_driver_current_lane1_46=0x8 +serdes_driver_current_lane2_46=0x8 +serdes_driver_current_lane3_46=0x8 +serdes_driver_current_lane0_50=0x8 +serdes_driver_current_lane1_50=0x8 +serdes_driver_current_lane2_50=0x8 +serdes_driver_current_lane3_50=0x8 +serdes_driver_current_lane0_54=0x8 +serdes_driver_current_lane1_54=0x8 +serdes_driver_current_lane2_54=0x8 +serdes_driver_current_lane3_54=0x8 +serdes_driver_current_lane0_58=0x8 +serdes_driver_current_lane1_58=0x8 +serdes_driver_current_lane2_58=0x8 +serdes_driver_current_lane3_58=0x8 +serdes_driver_current_lane0_62=0x8 +serdes_driver_current_lane1_62=0x8 +serdes_driver_current_lane2_62=0x8 +serdes_driver_current_lane3_62=0x8 +serdes_driver_current_lane0_68=0x8 +serdes_driver_current_lane1_68=0x8 +serdes_driver_current_lane2_68=0x8 +serdes_driver_current_lane3_68=0x8 +serdes_driver_current_lane0_72=0x8 +serdes_driver_current_lane1_72=0x8 +serdes_driver_current_lane2_72=0x8 +serdes_driver_current_lane3_72=0x8 +serdes_driver_current_lane0_76=0x8 +serdes_driver_current_lane1_76=0x8 +serdes_driver_current_lane2_76=0x8 +serdes_driver_current_lane3_76=0x8 +serdes_driver_current_lane0_80=0x8 +serdes_driver_current_lane1_80=0x8 +serdes_driver_current_lane2_80=0x8 +serdes_driver_current_lane3_80=0x8 +serdes_driver_current_lane0_84=0x8 +serdes_driver_current_lane1_84=0x8 +serdes_driver_current_lane2_84=0x8 +serdes_driver_current_lane3_84=0x8 +serdes_driver_current_lane0_88=0x8 +serdes_driver_current_lane1_88=0x8 +serdes_driver_current_lane2_88=0x8 +serdes_driver_current_lane3_88=0x8 +serdes_driver_current_lane0_92=0x8 +serdes_driver_current_lane1_92=0x8 +serdes_driver_current_lane2_92=0x8 +serdes_driver_current_lane3_92=0x8 +serdes_driver_current_lane0_96=0x8 +serdes_driver_current_lane1_96=0x8 +serdes_driver_current_lane2_96=0x8 +serdes_driver_current_lane3_96=0x8 +serdes_driver_current_lane0_102=0x8 +serdes_driver_current_lane1_102=0x8 +serdes_driver_current_lane2_102=0x8 +serdes_driver_current_lane3_102=0x8 +serdes_driver_current_lane0_106=0x8 +serdes_driver_current_lane1_106=0x8 +serdes_driver_current_lane2_106=0x8 +serdes_driver_current_lane3_106=0x8 +serdes_driver_current_lane0_110=0x8 +serdes_driver_current_lane1_110=0x8 +serdes_driver_current_lane2_110=0x8 +serdes_driver_current_lane3_110=0x8 +serdes_driver_current_lane0_114=0x8 +serdes_driver_current_lane1_114=0x8 +serdes_driver_current_lane2_114=0x8 +serdes_driver_current_lane3_114=0x8 +serdes_driver_current_lane0_118=0x8 +serdes_driver_current_lane1_118=0x8 +serdes_driver_current_lane2_118=0x8 +serdes_driver_current_lane3_118=0x8 +serdes_driver_current_lane0_122=0x8 +serdes_driver_current_lane1_122=0x8 +serdes_driver_current_lane2_122=0x8 +serdes_driver_current_lane3_122=0x8 +serdes_driver_current_lane0_126=0x8 +serdes_driver_current_lane1_126=0x8 +serdes_driver_current_lane2_126=0x8 +serdes_driver_current_lane3_126=0x8 +serdes_driver_current_lane0_130=0x8 +serdes_driver_current_lane1_130=0x8 +serdes_driver_current_lane2_130=0x8 +serdes_driver_current_lane3_130=0x8 + +#Preemphasis +serdes_preemphasis_lane0_1=0x264204 +serdes_preemphasis_lane1_1=0x264204 +serdes_preemphasis_lane2_1=0x264204 +serdes_preemphasis_lane3_1=0x264204 +serdes_preemphasis_lane0_5=0x224406 +serdes_preemphasis_lane1_5=0x224406 +serdes_preemphasis_lane2_5=0x264204 +serdes_preemphasis_lane3_5=0x244206 +serdes_preemphasis_lane0_9=0x204606 +serdes_preemphasis_lane1_9=0x264204 +serdes_preemphasis_lane2_9=0x204606 +serdes_preemphasis_lane3_9=0x224406 +serdes_preemphasis_lane0_13=0x204606 +serdes_preemphasis_lane1_13=0x224406 +serdes_preemphasis_lane2_13=0x224406 +serdes_preemphasis_lane3_13=0x244206 +serdes_preemphasis_lane0_17=0x204606 +serdes_preemphasis_lane1_17=0x204606 +serdes_preemphasis_lane2_17=0x204606 +serdes_preemphasis_lane3_17=0x204606 +serdes_preemphasis_lane0_21=0x204606 +serdes_preemphasis_lane1_21=0x204606 +serdes_preemphasis_lane2_21=0x204606 +serdes_preemphasis_lane3_21=0x224406 +serdes_preemphasis_lane0_25=0x204606 +serdes_preemphasis_lane1_25=0x204606 +serdes_preemphasis_lane2_25=0x204606 +serdes_preemphasis_lane3_25=0x204606 +serdes_preemphasis_lane0_29=0x204606 +serdes_preemphasis_lane1_29=0x204606 +serdes_preemphasis_lane2_29=0x204606 +serdes_preemphasis_lane3_29=0x204606 +serdes_preemphasis_lane0_34=0x284601 +serdes_preemphasis_lane1_34=0x284601 +serdes_preemphasis_lane2_34=0x284601 +serdes_preemphasis_lane3_34=0x284601 +serdes_preemphasis_lane0_38=0x204604 +serdes_preemphasis_lane1_38=0x204604 +serdes_preemphasis_lane2_38=0x224406 +serdes_preemphasis_lane3_38=0x224406 +serdes_preemphasis_lane0_42=0x284601 +serdes_preemphasis_lane1_42=0x294501 +serdes_preemphasis_lane2_42=0x284601 +serdes_preemphasis_lane3_42=0x284601 +serdes_preemphasis_lane0_46=0x204802 +serdes_preemphasis_lane1_46=0x204802 +serdes_preemphasis_lane2_46=0x204802 +serdes_preemphasis_lane3_46=0x204802 +serdes_preemphasis_lane0_50=0x1e4f01 +serdes_preemphasis_lane1_50=0x1e4d01 +serdes_preemphasis_lane2_50=0x1e4f01 +serdes_preemphasis_lane3_50=0x1e4f01 +serdes_preemphasis_lane0_54=0x1f4a03 +serdes_preemphasis_lane1_54=0x1f4a03 +serdes_preemphasis_lane2_54=0x1f4a03 +serdes_preemphasis_lane3_54=0x1f4a03 +serdes_preemphasis_lane0_58=0x1e4f01 +serdes_preemphasis_lane1_58=0x1e4f01 +serdes_preemphasis_lane2_58=0x1e4f01 +serdes_preemphasis_lane3_58=0x1e4f01 +serdes_preemphasis_lane0_62=0x1e4e02 +serdes_preemphasis_lane1_62=0x1e4e02 +serdes_preemphasis_lane2_62=0x1e4e02 +serdes_preemphasis_lane3_62=0x1e4e02 +serdes_preemphasis_lane0_68=0x1e4f01 +serdes_preemphasis_lane1_68=0x1e4f01 +serdes_preemphasis_lane2_68=0x1e4f01 +serdes_preemphasis_lane3_68=0x1e4f01 +serdes_preemphasis_lane0_72=0x1e4e02 +serdes_preemphasis_lane1_72=0x1e4e02 +serdes_preemphasis_lane2_72=0x1e4e02 +serdes_preemphasis_lane3_72=0x1e4e02 +serdes_preemphasis_lane0_76=0x1c4d02 +serdes_preemphasis_lane1_76=0x195002 +serdes_preemphasis_lane2_76=0x195002 +serdes_preemphasis_lane3_76=0x195002 +serdes_preemphasis_lane0_80=0x1e4e02 +serdes_preemphasis_lane1_80=0x1e4e02 +serdes_preemphasis_lane2_80=0x1e4e02 +serdes_preemphasis_lane3_80=0x1e4e02 +serdes_preemphasis_lane0_84=0x234701 +serdes_preemphasis_lane1_84=0x234701 +serdes_preemphasis_lane2_84=0x234701 +serdes_preemphasis_lane3_84=0x234701 +serdes_preemphasis_lane0_88=0x224802 +serdes_preemphasis_lane1_88=0x224602 +serdes_preemphasis_lane2_88=0x224802 +serdes_preemphasis_lane3_88=0x224802 +serdes_preemphasis_lane0_92=0x234801 +serdes_preemphasis_lane1_92=0x244701 +serdes_preemphasis_lane2_92=0x234801 +serdes_preemphasis_lane3_92=0x234601 +serdes_preemphasis_lane0_96=0x204406 +serdes_preemphasis_lane1_96=0x204406 +serdes_preemphasis_lane2_96=0x204406 +serdes_preemphasis_lane3_96=0x224602 +serdes_preemphasis_lane0_102=0x204606 +serdes_preemphasis_lane1_102=0x235002 +serdes_preemphasis_lane2_102=0x204606 +serdes_preemphasis_lane3_102=0x204606 +serdes_preemphasis_lane0_106=0x204606 +serdes_preemphasis_lane1_106=0x204606 +serdes_preemphasis_lane2_106=0x204606 +serdes_preemphasis_lane3_106=0x204606 +serdes_preemphasis_lane0_110=0x204606 +serdes_preemphasis_lane1_110=0x224406 +serdes_preemphasis_lane2_110=0x224406 +serdes_preemphasis_lane3_110=0x224406 +serdes_preemphasis_lane0_114=0x224406 +serdes_preemphasis_lane1_114=0x204606 +serdes_preemphasis_lane2_114=0x204606 +serdes_preemphasis_lane3_114=0x224406 +serdes_preemphasis_lane0_118=0x224406 +serdes_preemphasis_lane1_118=0x224406 +serdes_preemphasis_lane2_118=0x224406 +serdes_preemphasis_lane3_118=0x224406 +serdes_preemphasis_lane0_122=0x244404 +serdes_preemphasis_lane1_122=0x244404 +serdes_preemphasis_lane2_122=0x244404 +serdes_preemphasis_lane3_122=0x244404 +serdes_preemphasis_lane0_126=0x234504 +serdes_preemphasis_lane1_126=0x234404 +serdes_preemphasis_lane2_126=0x224406 +serdes_preemphasis_lane3_126=0x224406 +serdes_preemphasis_lane0_130=0x244404 +serdes_preemphasis_lane1_130=0x244404 +serdes_preemphasis_lane2_130=0x234504 +serdes_preemphasis_lane3_130=0x264501 diff --git a/device/accton/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/sai.profile b/device/accton/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/sai.profile index f2d9aa96821b..e2f945e9a073 100644 --- a/device/accton/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/sai.profile +++ b/device/accton/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th2-as7816-64x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th2-as7816-64x100G.config.bcm diff --git a/device/accton/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/th2-as7816-64x100G.config.bcm b/device/accton/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/th2-as7816-64x100G.config.bcm new file mode 100644 index 000000000000..78f6b419864e --- /dev/null +++ b/device/accton/x86_64-accton_as7816_64x-r0/Accton-AS7816-64X/th2-as7816-64x100G.config.bcm @@ -0,0 +1,875 @@ +# accton_as7816_64x 64x100G SDK config +os=unix +schan_intr_enable=0 +l2_mem_entries=40960 +l2xmsg_mode=1 +l3_mem_entries=40960 +parity_correction=0 +parity_enable=0 +mmu_lossless=1 + +pbmp_xport_xe=0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff +pbmp_oversubscribe=0x1ffffffffffffffffffffffffffffffffffffffffffffffffffffffffff + +# platform specific setting +arl_clean_timeout_usec=15000000 +asf_mem_profile=2 +bcm_num_cos=8 +bcm_stat_flags=1 +bcm_stat_jumbo=9236 +cdma_timeout_usec=15000000 +dma_desc_timeout_usec=15000000 +ipv6_lpm_128b_enable=1 +l3_alpm_enable=2 +lpm_scaling_enable=0 +max_vp_lags=0 +miim_intr_enable=0 +module_64ports=1 +oversubscribe_mode=1 + +#add loopback port +# port 33 is the first loopback port +portmap_33=260:10 +# port 66 is the first management port +portmap_66=257:10 +# port 67 is the second loopback port +portmap_67=261:10 +# port 100 is the second management port +portmap_100=259:10 +# port 101 is the third loopback port +portmap_101=262:10 +# port 135 is the fourth loopback port +portmap_135=263:10 + +#Port0 +#FC18 +portmap_36=73:100 +phy_chain_rx_lane_map_physical{73.0}=0x3210 +phy_chain_tx_lane_map_physical{73.0}=0x3021 +phy_chain_rx_polarity_flip_physical{73.0}=0x0 +phy_chain_rx_polarity_flip_physical{74.0}=0x0 +phy_chain_rx_polarity_flip_physical{75.0}=0x0 +phy_chain_rx_polarity_flip_physical{76.0}=0x1 +phy_chain_tx_polarity_flip_physical{73.0}=0x0 +phy_chain_tx_polarity_flip_physical{74.0}=0x0 +phy_chain_tx_polarity_flip_physical{75.0}=0x1 +phy_chain_tx_polarity_flip_physical{76.0}=0x0 +#Port1 +#FC16 +portmap_34=65:100 +phy_chain_rx_lane_map_physical{65.0}=0x3210 +phy_chain_tx_lane_map_physical{65.0}=0x3210 +phy_chain_rx_polarity_flip_physical{65.0}=0x0 +phy_chain_rx_polarity_flip_physical{66.0}=0x0 +phy_chain_rx_polarity_flip_physical{67.0}=0x0 +phy_chain_rx_polarity_flip_physical{68.0}=0x0 +phy_chain_tx_polarity_flip_physical{65.0}=0x1 +phy_chain_tx_polarity_flip_physical{66.0}=0x0 +phy_chain_tx_polarity_flip_physical{67.0}=0x0 +phy_chain_tx_polarity_flip_physical{68.0}=0x0 +#Port2 +#FC20 +portmap_38=81:100 +phy_chain_rx_lane_map_physical{81.0}=0x1230 +phy_chain_tx_lane_map_physical{81.0}=0x1032 +phy_chain_rx_polarity_flip_physical{81.0}=0x1 +phy_chain_rx_polarity_flip_physical{82.0}=0x0 +phy_chain_rx_polarity_flip_physical{83.0}=0x1 +phy_chain_rx_polarity_flip_physical{84.0}=0x0 +phy_chain_tx_polarity_flip_physical{81.0}=0x1 +phy_chain_tx_polarity_flip_physical{82.0}=0x1 +phy_chain_tx_polarity_flip_physical{83.0}=0x1 +phy_chain_tx_polarity_flip_physical{84.0}=0x0 +#Port3 +#FC22 +portmap_40=89:100 +phy_chain_rx_lane_map_physical{89.0}=0x0132 +phy_chain_tx_lane_map_physical{89.0}=0x1203 +phy_chain_rx_polarity_flip_physical{89.0}=0x1 +phy_chain_rx_polarity_flip_physical{90.0}=0x0 +phy_chain_rx_polarity_flip_physical{91.0}=0x0 +phy_chain_rx_polarity_flip_physical{92.0}=0x1 +phy_chain_tx_polarity_flip_physical{89.0}=0x1 +phy_chain_tx_polarity_flip_physical{90.0}=0x0 +phy_chain_tx_polarity_flip_physical{91.0}=0x1 +phy_chain_tx_polarity_flip_physical{92.0}=0x1 +#Port4 +#FC26 +portmap_44=105:100 +phy_chain_rx_lane_map_physical{105.0}=0x3210 +phy_chain_tx_lane_map_physical{105.0}=0x0231 +phy_chain_rx_polarity_flip_physical{105.0}=0x0 +phy_chain_rx_polarity_flip_physical{106.0}=0x0 +phy_chain_rx_polarity_flip_physical{107.0}=0x0 +phy_chain_rx_polarity_flip_physical{108.0}=0x1 +phy_chain_tx_polarity_flip_physical{105.0}=0x0 +phy_chain_tx_polarity_flip_physical{106.0}=0x1 +phy_chain_tx_polarity_flip_physical{107.0}=0x0 +phy_chain_tx_polarity_flip_physical{108.0}=0x1 +#Port5 +#FC24 +portmap_42=97:100 +phy_chain_rx_lane_map_physical{97.0}=0x0213 +phy_chain_tx_lane_map_physical{97.0}=0x3210 +phy_chain_rx_polarity_flip_physical{97.0}=0x1 +phy_chain_rx_polarity_flip_physical{98.0}=0x0 +phy_chain_rx_polarity_flip_physical{99.0}=0x0 +phy_chain_rx_polarity_flip_physical{100.0}=0x1 +phy_chain_tx_polarity_flip_physical{97.0}=0x1 +phy_chain_tx_polarity_flip_physical{98.0}=0x1 +phy_chain_tx_polarity_flip_physical{99.0}=0x0 +phy_chain_tx_polarity_flip_physical{100.0}=0x0 +#Port6 +#FC 28 +portmap_46=113:100 +phy_chain_rx_lane_map_physical{113.0}=0x3021 +phy_chain_tx_lane_map_physical{113.0}=0x0312 +phy_chain_rx_polarity_flip_physical{113.0}=0x0 +phy_chain_rx_polarity_flip_physical{114.0}=0x1 +phy_chain_rx_polarity_flip_physical{115.0}=0x1 +phy_chain_rx_polarity_flip_physical{116.0}=0x0 +phy_chain_tx_polarity_flip_physical{113.0}=0x1 +phy_chain_tx_polarity_flip_physical{114.0}=0x0 +phy_chain_tx_polarity_flip_physical{115.0}=0x0 +phy_chain_tx_polarity_flip_physical{116.0}=0x1 +#Port7 +#FC30 +portmap_48=121:100 +phy_chain_rx_lane_map_physical{121.0}=0x3021 +phy_chain_tx_lane_map_physical{121.0}=0x2130 +phy_chain_rx_polarity_flip_physical{121.0}=0x0 +phy_chain_rx_polarity_flip_physical{122.0}=0x1 +phy_chain_rx_polarity_flip_physical{123.0}=0x1 +phy_chain_rx_polarity_flip_physical{124.0}=0x0 +phy_chain_tx_polarity_flip_physical{121.0}=0x1 +phy_chain_tx_polarity_flip_physical{122.0}=0x1 +phy_chain_tx_polarity_flip_physical{123.0}=0x1 +phy_chain_tx_polarity_flip_physical{124.0}=0x0 +#Port8 +#FC10 +portmap_11=41:100 +phy_chain_rx_lane_map_physical{41.0}=0x0132 +phy_chain_tx_lane_map_physical{41.0}=0x1302 +phy_chain_rx_polarity_flip_physical{41.0}=0x0 +phy_chain_rx_polarity_flip_physical{42.0}=0x0 +phy_chain_rx_polarity_flip_physical{43.0}=0x0 +phy_chain_rx_polarity_flip_physical{44.0}=0x0 +phy_chain_tx_polarity_flip_physical{41.0}=0x1 +phy_chain_tx_polarity_flip_physical{42.0}=0x0 +phy_chain_tx_polarity_flip_physical{43.0}=0x0 +phy_chain_tx_polarity_flip_physical{44.0}=0x0 +#Port9 +#FC8 +portmap_9=33:100 +phy_chain_rx_lane_map_physical{33.0}=0x2310 +phy_chain_tx_lane_map_physical{33.0}=0x0213 +phy_chain_rx_polarity_flip_physical{33.0}=0x0 +phy_chain_rx_polarity_flip_physical{34.0}=0x1 +phy_chain_rx_polarity_flip_physical{35.0}=0x0 +phy_chain_rx_polarity_flip_physical{36.0}=0x0 +phy_chain_tx_polarity_flip_physical{33.0}=0x1 +phy_chain_tx_polarity_flip_physical{34.0}=0x1 +phy_chain_tx_polarity_flip_physical{35.0}=0x0 +phy_chain_tx_polarity_flip_physical{36.0}=0x0 +#Port10 +#FC12 +portmap_13=49:100 +phy_chain_rx_lane_map_physical{49.0}=0x3210 +phy_chain_tx_lane_map_physical{49.0}=0x3102 +phy_chain_rx_polarity_flip_physical{49.0}=0x1 +phy_chain_rx_polarity_flip_physical{50.0}=0x0 +phy_chain_rx_polarity_flip_physical{51.0}=0x1 +phy_chain_rx_polarity_flip_physical{52.0}=0x0 +phy_chain_tx_polarity_flip_physical{49.0}=0x1 +phy_chain_tx_polarity_flip_physical{50.0}=0x1 +phy_chain_tx_polarity_flip_physical{51.0}=0x0 +phy_chain_tx_polarity_flip_physical{52.0}=0x1 +#Port11 +#FC14 +portmap_15=57:100 +phy_chain_rx_lane_map_physical{57.0}=0x3210 +phy_chain_tx_lane_map_physical{57.0}=0x1302 +phy_chain_rx_polarity_flip_physical{57.0}=0x1 +phy_chain_rx_polarity_flip_physical{58.0}=0x0 +phy_chain_rx_polarity_flip_physical{59.0}=0x1 +phy_chain_rx_polarity_flip_physical{60.0}=0x0 +phy_chain_tx_polarity_flip_physical{57.0}=0x0 +phy_chain_tx_polarity_flip_physical{58.0}=0x0 +phy_chain_tx_polarity_flip_physical{59.0}=0x0 +phy_chain_tx_polarity_flip_physical{60.0}=0x1 +#Port12 +#FC34 +portmap_70=137:100 +phy_chain_rx_lane_map_physical{137.0}=0x3210 +phy_chain_tx_lane_map_physical{137.0}=0x0213 +phy_chain_rx_polarity_flip_physical{137.0}=0x0 +phy_chain_rx_polarity_flip_physical{138.0}=0x0 +phy_chain_rx_polarity_flip_physical{139.0}=0x1 +phy_chain_rx_polarity_flip_physical{140.0}=0x0 +phy_chain_tx_polarity_flip_physical{137.0}=0x1 +phy_chain_tx_polarity_flip_physical{138.0}=0x0 +phy_chain_tx_polarity_flip_physical{139.0}=0x0 +phy_chain_tx_polarity_flip_physical{140.0}=0x0 +#Port13 +#FC32 +portmap_68=129:100 +phy_chain_rx_lane_map_physical{129.0}=0x3021 +phy_chain_tx_lane_map_physical{129.0}=0x1203 +phy_chain_rx_polarity_flip_physical{129.0}=0x1 +phy_chain_rx_polarity_flip_physical{130.0}=0x0 +phy_chain_rx_polarity_flip_physical{131.0}=0x0 +phy_chain_rx_polarity_flip_physical{132.0}=0x0 +phy_chain_tx_polarity_flip_physical{129.0}=0x1 +phy_chain_tx_polarity_flip_physical{130.0}=0x1 +phy_chain_tx_polarity_flip_physical{131.0}=0x1 +phy_chain_tx_polarity_flip_physical{132.0}=0x1 +#Port14 +#FC36 +portmap_72=145:100 +phy_chain_rx_lane_map_physical{145.0}=0x0213 +phy_chain_tx_lane_map_physical{145.0}=0x2301 +phy_chain_rx_polarity_flip_physical{145.0}=0x1 +phy_chain_rx_polarity_flip_physical{146.0}=0x1 +phy_chain_rx_polarity_flip_physical{147.0}=0x0 +phy_chain_rx_polarity_flip_physical{148.0}=0x0 +phy_chain_tx_polarity_flip_physical{145.0}=0x0 +phy_chain_tx_polarity_flip_physical{146.0}=0x0 +phy_chain_tx_polarity_flip_physical{147.0}=0x0 +phy_chain_tx_polarity_flip_physical{148.0}=0x1 +#Port15 +#FC38 +portmap_74=153:100 +phy_chain_rx_lane_map_physical{153.0}=0x0213 +phy_chain_tx_lane_map_physical{153.0}=0x1302 +phy_chain_rx_polarity_flip_physical{153.0}=0x1 +phy_chain_rx_polarity_flip_physical{154.0}=0x0 +phy_chain_rx_polarity_flip_physical{155.0}=0x1 +phy_chain_rx_polarity_flip_physical{156.0}=0x1 +phy_chain_tx_polarity_flip_physical{153.0}=0x0 +phy_chain_tx_polarity_flip_physical{154.0}=0x1 +phy_chain_tx_polarity_flip_physical{155.0}=0x0 +phy_chain_tx_polarity_flip_physical{156.0}=0x0 +#Port16 +#FC43 +portmap_79=173:100 +phy_chain_rx_lane_map_physical{173.0}=0x1032 +phy_chain_tx_lane_map_physical{173.0}=0x1203 +phy_chain_rx_polarity_flip_physical{173.0}=0x0 +phy_chain_rx_polarity_flip_physical{174.0}=0x0 +phy_chain_rx_polarity_flip_physical{175.0}=0x0 +phy_chain_rx_polarity_flip_physical{176.0}=0x0 +phy_chain_tx_polarity_flip_physical{173.0}=0x1 +phy_chain_tx_polarity_flip_physical{174.0}=0x1 +phy_chain_tx_polarity_flip_physical{175.0}=0x0 +phy_chain_tx_polarity_flip_physical{176.0}=0x1 +#Port17 +#FC41 +portmap_77=165:100 +phy_chain_rx_lane_map_physical{165.0}=0x1230 +phy_chain_tx_lane_map_physical{165.0}=0x2130 +phy_chain_rx_polarity_flip_physical{165.0}=0x1 +phy_chain_rx_polarity_flip_physical{166.0}=0x0 +phy_chain_rx_polarity_flip_physical{167.0}=0x1 +phy_chain_rx_polarity_flip_physical{168.0}=0x1 +phy_chain_tx_polarity_flip_physical{165.0}=0x1 +phy_chain_tx_polarity_flip_physical{166.0}=0x0 +phy_chain_tx_polarity_flip_physical{167.0}=0x1 +phy_chain_tx_polarity_flip_physical{168.0}=0x0 +#Port18 +#FC45 +portmap_81=181:100 +phy_chain_rx_lane_map_physical{181.0}=0x0312 +phy_chain_tx_lane_map_physical{181.0}=0x3120 +phy_chain_rx_polarity_flip_physical{181.0}=0x0 +phy_chain_rx_polarity_flip_physical{182.0}=0x1 +phy_chain_rx_polarity_flip_physical{183.0}=0x1 +phy_chain_rx_polarity_flip_physical{184.0}=0x0 +phy_chain_tx_polarity_flip_physical{181.0}=0x0 +phy_chain_tx_polarity_flip_physical{182.0}=0x0 +phy_chain_tx_polarity_flip_physical{183.0}=0x1 +phy_chain_tx_polarity_flip_physical{184.0}=0x0 +#Port19 +#FC47 +portmap_83=189:100 +phy_chain_rx_lane_map_physical{189.0}=0x0132 +phy_chain_tx_lane_map_physical{189.0}=0x3210 +phy_chain_rx_polarity_flip_physical{189.0}=0x0 +phy_chain_rx_polarity_flip_physical{190.0}=0x1 +phy_chain_rx_polarity_flip_physical{191.0}=0x1 +phy_chain_rx_polarity_flip_physical{192.0}=0x1 +phy_chain_tx_polarity_flip_physical{189.0}=0x1 +phy_chain_tx_polarity_flip_physical{190.0}=0x0 +phy_chain_tx_polarity_flip_physical{191.0}=0x0 +phy_chain_tx_polarity_flip_physical{192.0}=0x0 +#Port20 +#FC3 +portmap_4=13:100 +phy_chain_rx_lane_map_physical{13.0}=0x3120 +phy_chain_tx_lane_map_physical{13.0}=0x3210 +phy_chain_rx_polarity_flip_physical{13.0}=0x1 +phy_chain_rx_polarity_flip_physical{14.0}=0x0 +phy_chain_rx_polarity_flip_physical{15.0}=0x1 +phy_chain_rx_polarity_flip_physical{16.0}=0x1 +phy_chain_tx_polarity_flip_physical{13.0}=0x0 +phy_chain_tx_polarity_flip_physical{14.0}=0x0 +phy_chain_tx_polarity_flip_physical{15.0}=0x0 +phy_chain_tx_polarity_flip_physical{16.0}=0x1 +#Port21 +#FC1 +portmap_2=5:100 +phy_chain_rx_lane_map_physical{5.0}=0x0213 +phy_chain_tx_lane_map_physical{5.0}=0x0321 +phy_chain_rx_polarity_flip_physical{5.0}=0x0 +phy_chain_rx_polarity_flip_physical{6.0}=0x0 +phy_chain_rx_polarity_flip_physical{7.0}=0x1 +phy_chain_rx_polarity_flip_physical{8.0}=0x0 +phy_chain_tx_polarity_flip_physical{5.0}=0x1 +phy_chain_tx_polarity_flip_physical{6.0}=0x1 +phy_chain_tx_polarity_flip_physical{7.0}=0x0 +phy_chain_tx_polarity_flip_physical{8.0}=0x1 +#Port22 +#FC7 +portmap_8=29:100 +phy_chain_rx_lane_map_physical{29.0}=0x3021 +phy_chain_tx_lane_map_physical{29.0}=0x2130 +phy_chain_rx_polarity_flip_physical{29.0}=0x1 +phy_chain_rx_polarity_flip_physical{30.0}=0x0 +phy_chain_rx_polarity_flip_physical{31.0}=0x0 +phy_chain_rx_polarity_flip_physical{32.0}=0x1 +phy_chain_tx_polarity_flip_physical{29.0}=0x1 +phy_chain_tx_polarity_flip_physical{30.0}=0x0 +phy_chain_tx_polarity_flip_physical{31.0}=0x0 +phy_chain_tx_polarity_flip_physical{32.0}=0x0 +#Port23 +#FC5 +portmap_6=21:100 +phy_chain_rx_lane_map_physical{21.0}=0x0321 +phy_chain_tx_lane_map_physical{21.0}=0x0123 +phy_chain_rx_polarity_flip_physical{21.0}=0x1 +phy_chain_rx_polarity_flip_physical{22.0}=0x0 +phy_chain_rx_polarity_flip_physical{23.0}=0x1 +phy_chain_rx_polarity_flip_physical{24.0}=0x0 +phy_chain_tx_polarity_flip_physical{21.0}=0x0 +phy_chain_tx_polarity_flip_physical{22.0}=0x1 +phy_chain_tx_polarity_flip_physical{23.0}=0x1 +phy_chain_tx_polarity_flip_physical{24.0}=0x1 +#Port24 +#FC51 +portmap_105=205:100 +phy_chain_rx_lane_map_physical{205.0}=0x0132 +phy_chain_tx_lane_map_physical{205.0}=0x1230 +phy_chain_rx_polarity_flip_physical{205.0}=0x1 +phy_chain_rx_polarity_flip_physical{206.0}=0x1 +phy_chain_rx_polarity_flip_physical{207.0}=0x1 +phy_chain_rx_polarity_flip_physical{208.0}=0x0 +phy_chain_tx_polarity_flip_physical{205.0}=0x0 +phy_chain_tx_polarity_flip_physical{206.0}=0x1 +phy_chain_tx_polarity_flip_physical{207.0}=0x0 +phy_chain_tx_polarity_flip_physical{208.0}=0x1 +#Port25 +#FC49 +portmap_103=197:100 +phy_chain_rx_lane_map_physical{197.0}=0x1230 +phy_chain_tx_lane_map_physical{197.0}=0x3021 +phy_chain_rx_polarity_flip_physical{197.0}=0x0 +phy_chain_rx_polarity_flip_physical{198.0}=0x0 +phy_chain_rx_polarity_flip_physical{199.0}=0x0 +phy_chain_rx_polarity_flip_physical{200.0}=0x0 +phy_chain_tx_polarity_flip_physical{197.0}=0x1 +phy_chain_tx_polarity_flip_physical{198.0}=0x0 +phy_chain_tx_polarity_flip_physical{199.0}=0x1 +phy_chain_tx_polarity_flip_physical{200.0}=0x0 +#Port26 +#FC53 +portmap_107=213:100 +phy_chain_rx_lane_map_physical{213.0}=0x3210 +phy_chain_tx_lane_map_physical{213.0}=0x1230 +phy_chain_rx_polarity_flip_physical{213.0}=0x0 +phy_chain_rx_polarity_flip_physical{214.0}=0x1 +phy_chain_rx_polarity_flip_physical{215.0}=0x0 +phy_chain_rx_polarity_flip_physical{216.0}=0x1 +phy_chain_tx_polarity_flip_physical{213.0}=0x0 +phy_chain_tx_polarity_flip_physical{214.0}=0x0 +phy_chain_tx_polarity_flip_physical{215.0}=0x0 +phy_chain_tx_polarity_flip_physical{216.0}=0x1 +#Port27 +#FC55 +portmap_109=221:100 +phy_chain_rx_lane_map_physical{221.0}=0x3210 +phy_chain_tx_lane_map_physical{221.0}=0x3210 +phy_chain_rx_polarity_flip_physical{221.0}=0x1 +phy_chain_rx_polarity_flip_physical{222.0}=0x1 +phy_chain_rx_polarity_flip_physical{223.0}=0x0 +phy_chain_rx_polarity_flip_physical{224.0}=0x0 +phy_chain_tx_polarity_flip_physical{221.0}=0x0 +phy_chain_tx_polarity_flip_physical{222.0}=0x0 +phy_chain_tx_polarity_flip_physical{223.0}=0x0 +phy_chain_tx_polarity_flip_physical{224.0}=0x0 +#Port28 +#FC57 +portmap_111=229:100 +phy_chain_rx_lane_map_physical{229.0}=0x2301 +phy_chain_tx_lane_map_physical{229.0}=0x3210 +phy_chain_rx_polarity_flip_physical{229.0}=0x1 +phy_chain_rx_polarity_flip_physical{230.0}=0x1 +phy_chain_rx_polarity_flip_physical{231.0}=0x0 +phy_chain_rx_polarity_flip_physical{232.0}=0x1 +phy_chain_tx_polarity_flip_physical{229.0}=0x0 +phy_chain_tx_polarity_flip_physical{230.0}=0x1 +phy_chain_tx_polarity_flip_physical{231.0}=0x0 +phy_chain_tx_polarity_flip_physical{232.0}=0x0 +#Port29 +#FC59 +portmap_113=237:100 +phy_chain_rx_lane_map_physical{237.0}=0x0123 +phy_chain_tx_lane_map_physical{237.0}=0x3210 +phy_chain_rx_polarity_flip_physical{237.0}=0x1 +phy_chain_rx_polarity_flip_physical{238.0}=0x0 +phy_chain_rx_polarity_flip_physical{239.0}=0x1 +phy_chain_rx_polarity_flip_physical{240.0}=0x1 +phy_chain_tx_polarity_flip_physical{237.0}=0x1 +phy_chain_tx_polarity_flip_physical{238.0}=0x1 +phy_chain_tx_polarity_flip_physical{239.0}=0x0 +phy_chain_tx_polarity_flip_physical{240.0}=0x0 +#Port30 +#FC61 +portmap_115=245:100 +phy_chain_rx_lane_map_physical{245.0}=0x0213 +phy_chain_tx_lane_map_physical{245.0}=0x3210 +phy_chain_rx_polarity_flip_physical{245.0}=0x0 +phy_chain_rx_polarity_flip_physical{246.0}=0x0 +phy_chain_rx_polarity_flip_physical{247.0}=0x1 +phy_chain_rx_polarity_flip_physical{248.0}=0x1 +phy_chain_tx_polarity_flip_physical{245.0}=0x1 +phy_chain_tx_polarity_flip_physical{246.0}=0x0 +phy_chain_tx_polarity_flip_physical{247.0}=0x1 +phy_chain_tx_polarity_flip_physical{248.0}=0x0 +#Port31 +#FC63 +portmap_117=253:100 +phy_chain_rx_lane_map_physical{253.0}=0x0213 +phy_chain_tx_lane_map_physical{253.0}=0x0312 +phy_chain_rx_polarity_flip_physical{253.0}=0x0 +phy_chain_rx_polarity_flip_physical{254.0}=0x0 +phy_chain_rx_polarity_flip_physical{255.0}=0x0 +phy_chain_rx_polarity_flip_physical{256.0}=0x1 +phy_chain_tx_polarity_flip_physical{253.0}=0x0 +phy_chain_tx_polarity_flip_physical{254.0}=0x1 +phy_chain_tx_polarity_flip_physical{255.0}=0x0 +phy_chain_tx_polarity_flip_physical{256.0}=0x0 +#Port32 +#FC17 +portmap_35=69:100 +phy_chain_rx_lane_map_physical{69.0}=0x1032 +phy_chain_tx_lane_map_physical{69.0}=0x3102 +phy_chain_rx_polarity_flip_physical{69.0}=0x1 +phy_chain_rx_polarity_flip_physical{70.0}=0x0 +phy_chain_rx_polarity_flip_physical{71.0}=0x0 +phy_chain_rx_polarity_flip_physical{72.0}=0x1 +phy_chain_tx_polarity_flip_physical{69.0}=0x0 +phy_chain_tx_polarity_flip_physical{70.0}=0x0 +phy_chain_tx_polarity_flip_physical{71.0}=0x1 +phy_chain_tx_polarity_flip_physical{72.0}=0x1 +#Port33 +#FC19 +portmap_37=77:100 +phy_chain_rx_lane_map_physical{77.0}=0x1230 +phy_chain_tx_lane_map_physical{77.0}=0x3021 +phy_chain_rx_polarity_flip_physical{77.0}=0x1 +phy_chain_rx_polarity_flip_physical{78.0}=0x0 +phy_chain_rx_polarity_flip_physical{79.0}=0x1 +phy_chain_rx_polarity_flip_physical{80.0}=0x0 +phy_chain_tx_polarity_flip_physical{77.0}=0x0 +phy_chain_tx_polarity_flip_physical{78.0}=0x0 +phy_chain_tx_polarity_flip_physical{79.0}=0x1 +phy_chain_tx_polarity_flip_physical{80.0}=0x0 +#Port34 +#FC23 +portmap_41=93:100 +phy_chain_rx_lane_map_physical{93.0}=0x1032 +phy_chain_tx_lane_map_physical{93.0}=0x0231 +phy_chain_rx_polarity_flip_physical{93.0}=0x1 +phy_chain_rx_polarity_flip_physical{94.0}=0x1 +phy_chain_rx_polarity_flip_physical{95.0}=0x1 +phy_chain_rx_polarity_flip_physical{96.0}=0x1 +phy_chain_tx_polarity_flip_physical{93.0}=0x0 +phy_chain_tx_polarity_flip_physical{94.0}=0x1 +phy_chain_tx_polarity_flip_physical{95.0}=0x1 +phy_chain_tx_polarity_flip_physical{96.0}=0x1 +#Port35 +#FC21 +portmap_39=85:100 +phy_chain_rx_lane_map_physical{85.0}=0x0312 +phy_chain_tx_lane_map_physical{85.0}=0x1230 +phy_chain_rx_polarity_flip_physical{85.0}=0x0 +phy_chain_rx_polarity_flip_physical{86.0}=0x0 +phy_chain_rx_polarity_flip_physical{87.0}=0x0 +phy_chain_rx_polarity_flip_physical{88.0}=0x1 +phy_chain_tx_polarity_flip_physical{85.0}=0x1 +phy_chain_tx_polarity_flip_physical{86.0}=0x0 +phy_chain_tx_polarity_flip_physical{87.0}=0x1 +phy_chain_tx_polarity_flip_physical{88.0}=0x0 +#Port36 +#FC25 +portmap_43=101:100 +phy_chain_rx_lane_map_physical{101.0}=0x1302 +phy_chain_tx_lane_map_physical{101.0}=0x0213 +phy_chain_rx_polarity_flip_physical{101.0}=0x1 +phy_chain_rx_polarity_flip_physical{102.0}=0x0 +phy_chain_rx_polarity_flip_physical{103.0}=0x0 +phy_chain_rx_polarity_flip_physical{104.0}=0x0 +phy_chain_tx_polarity_flip_physical{101.0}=0x0 +phy_chain_tx_polarity_flip_physical{102.0}=0x1 +phy_chain_tx_polarity_flip_physical{103.0}=0x0 +phy_chain_tx_polarity_flip_physical{104.0}=0x1 +#Port37 +#FC27 +portmap_45=109:100 +phy_chain_rx_lane_map_physical{109.0}=0x0213 +phy_chain_tx_lane_map_physical{109.0}=0x1032 +phy_chain_rx_polarity_flip_physical{109.0}=0x1 +phy_chain_rx_polarity_flip_physical{110.0}=0x1 +phy_chain_rx_polarity_flip_physical{111.0}=0x0 +phy_chain_rx_polarity_flip_physical{112.0}=0x0 +phy_chain_tx_polarity_flip_physical{109.0}=0x0 +phy_chain_tx_polarity_flip_physical{110.0}=0x1 +phy_chain_tx_polarity_flip_physical{111.0}=0x1 +phy_chain_tx_polarity_flip_physical{112.0}=0x1 +#Port38 +#FC31 +portmap_49=125:100 +phy_chain_rx_lane_map_physical{125.0}=0x2130 +phy_chain_tx_lane_map_physical{125.0}=0x1203 +phy_chain_rx_polarity_flip_physical{125.0}=0x0 +phy_chain_rx_polarity_flip_physical{126.0}=0x0 +phy_chain_rx_polarity_flip_physical{127.0}=0x1 +phy_chain_rx_polarity_flip_physical{128.0}=0x1 +phy_chain_tx_polarity_flip_physical{125.0}=0x0 +phy_chain_tx_polarity_flip_physical{126.0}=0x1 +phy_chain_tx_polarity_flip_physical{127.0}=0x1 +phy_chain_tx_polarity_flip_physical{128.0}=0x1 +#Port39 +#FC29 +portmap_47=117:100 +phy_chain_rx_lane_map_physical{117.0}=0x3102 +phy_chain_tx_lane_map_physical{117.0}=0x2310 +phy_chain_rx_polarity_flip_physical{117.0}=0x1 +phy_chain_rx_polarity_flip_physical{118.0}=0x0 +phy_chain_rx_polarity_flip_physical{119.0}=0x1 +phy_chain_rx_polarity_flip_physical{120.0}=0x0 +phy_chain_tx_polarity_flip_physical{117.0}=0x1 +phy_chain_tx_polarity_flip_physical{118.0}=0x0 +phy_chain_tx_polarity_flip_physical{119.0}=0x1 +phy_chain_tx_polarity_flip_physical{120.0}=0x0 +#Port40 +#FC9 +portmap_10=37:100 +phy_chain_rx_lane_map_physical{37.0}=0x3210 +phy_chain_tx_lane_map_physical{37.0}=0x1302 +phy_chain_rx_polarity_flip_physical{37.0}=0x1 +phy_chain_rx_polarity_flip_physical{38.0}=0x0 +phy_chain_rx_polarity_flip_physical{39.0}=0x0 +phy_chain_rx_polarity_flip_physical{40.0}=0x0 +phy_chain_tx_polarity_flip_physical{37.0}=0x1 +phy_chain_tx_polarity_flip_physical{38.0}=0x0 +phy_chain_tx_polarity_flip_physical{39.0}=0x1 +phy_chain_tx_polarity_flip_physical{40.0}=0x1 +#Port41 +#FC11 +portmap_12=45:100 +phy_chain_rx_lane_map_physical{45.0}=0x3210 +phy_chain_tx_lane_map_physical{45.0}=0x0123 +phy_chain_rx_polarity_flip_physical{45.0}=0x0 +phy_chain_rx_polarity_flip_physical{46.0}=0x0 +phy_chain_rx_polarity_flip_physical{47.0}=0x0 +phy_chain_rx_polarity_flip_physical{48.0}=0x0 +phy_chain_tx_polarity_flip_physical{45.0}=0x0 +phy_chain_tx_polarity_flip_physical{46.0}=0x1 +phy_chain_tx_polarity_flip_physical{47.0}=0x0 +phy_chain_tx_polarity_flip_physical{48.0}=0x1 +#Port42 +#FC15 +portmap_16=61:100 +phy_chain_rx_lane_map_physical{61.0}=0x3210 +phy_chain_tx_lane_map_physical{61.0}=0x1230 +phy_chain_rx_polarity_flip_physical{61.0}=0x0 +phy_chain_rx_polarity_flip_physical{62.0}=0x1 +phy_chain_rx_polarity_flip_physical{63.0}=0x0 +phy_chain_rx_polarity_flip_physical{64.0}=0x0 +phy_chain_tx_polarity_flip_physical{61.0}=0x0 +phy_chain_tx_polarity_flip_physical{62.0}=0x1 +phy_chain_tx_polarity_flip_physical{63.0}=0x1 +phy_chain_tx_polarity_flip_physical{64.0}=0x0 +#Port43 +#FC13 +portmap_14=53:100 +phy_chain_rx_lane_map_physical{53.0}=0x3210 +phy_chain_tx_lane_map_physical{53.0}=0x3210 +phy_chain_rx_polarity_flip_physical{53.0}=0x0 +phy_chain_rx_polarity_flip_physical{54.0}=0x0 +phy_chain_rx_polarity_flip_physical{55.0}=0x1 +phy_chain_rx_polarity_flip_physical{56.0}=0x0 +phy_chain_tx_polarity_flip_physical{53.0}=0x1 +phy_chain_tx_polarity_flip_physical{54.0}=0x1 +phy_chain_tx_polarity_flip_physical{55.0}=0x1 +phy_chain_tx_polarity_flip_physical{56.0}=0x0 +#Port44 +#FC33 +portmap_69=133:100 +phy_chain_rx_lane_map_physical{133.0}=0x0312 +phy_chain_tx_lane_map_physical{133.0}=0x2310 +phy_chain_rx_polarity_flip_physical{133.0}=0x0 +phy_chain_rx_polarity_flip_physical{134.0}=0x0 +phy_chain_rx_polarity_flip_physical{135.0}=0x1 +phy_chain_rx_polarity_flip_physical{136.0}=0x0 +phy_chain_tx_polarity_flip_physical{133.0}=0x0 +phy_chain_tx_polarity_flip_physical{134.0}=0x1 +phy_chain_tx_polarity_flip_physical{135.0}=0x0 +phy_chain_tx_polarity_flip_physical{136.0}=0x1 +#Port45 +#FC35 +portmap_71=141:100 +phy_chain_rx_lane_map_physical{141.0}=0x3012 +phy_chain_tx_lane_map_physical{141.0}=0x0123 +phy_chain_rx_polarity_flip_physical{141.0}=0x1 +phy_chain_rx_polarity_flip_physical{142.0}=0x0 +phy_chain_rx_polarity_flip_physical{143.0}=0x1 +phy_chain_rx_polarity_flip_physical{144.0}=0x0 +phy_chain_tx_polarity_flip_physical{141.0}=0x1 +phy_chain_tx_polarity_flip_physical{142.0}=0x1 +phy_chain_tx_polarity_flip_physical{143.0}=0x0 +phy_chain_tx_polarity_flip_physical{144.0}=0x0 +#Port46 +#FC39 +portmap_75=157:100 +phy_chain_rx_lane_map_physical{157.0}=0x2103 +phy_chain_tx_lane_map_physical{157.0}=0x0231 +phy_chain_rx_polarity_flip_physical{157.0}=0x0 +phy_chain_rx_polarity_flip_physical{158.0}=0x0 +phy_chain_rx_polarity_flip_physical{159.0}=0x1 +phy_chain_rx_polarity_flip_physical{160.0}=0x0 +phy_chain_tx_polarity_flip_physical{157.0}=0x0 +phy_chain_tx_polarity_flip_physical{158.0}=0x1 +phy_chain_tx_polarity_flip_physical{159.0}=0x0 +phy_chain_tx_polarity_flip_physical{160.0}=0x0 +#Port47 +#FC37 +portmap_73=149:100 +phy_chain_rx_lane_map_physical{149.0}=0x3120 +phy_chain_tx_lane_map_physical{149.0}=0x1023 +phy_chain_rx_polarity_flip_physical{149.0}=0x0 +phy_chain_rx_polarity_flip_physical{150.0}=0x1 +phy_chain_rx_polarity_flip_physical{151.0}=0x0 +phy_chain_rx_polarity_flip_physical{152.0}=0x0 +phy_chain_tx_polarity_flip_physical{149.0}=0x1 +phy_chain_tx_polarity_flip_physical{150.0}=0x0 +phy_chain_tx_polarity_flip_physical{151.0}=0x0 +phy_chain_tx_polarity_flip_physical{152.0}=0x1 +#Port48 +#FC40 +portmap_76=161:100 +phy_chain_rx_lane_map_physical{161.0}=0x3012 +phy_chain_tx_lane_map_physical{161.0}=0x1023 +phy_chain_rx_polarity_flip_physical{161.0}=0x1 +phy_chain_rx_polarity_flip_physical{162.0}=0x1 +phy_chain_rx_polarity_flip_physical{163.0}=0x0 +phy_chain_rx_polarity_flip_physical{164.0}=0x0 +phy_chain_tx_polarity_flip_physical{161.0}=0x0 +phy_chain_tx_polarity_flip_physical{162.0}=0x1 +phy_chain_tx_polarity_flip_physical{163.0}=0x0 +phy_chain_tx_polarity_flip_physical{164.0}=0x0 +#Port49 +#FC42 +portmap_78=169:100 +phy_chain_rx_lane_map_physical{169.0}=0x3210 +phy_chain_tx_lane_map_physical{169.0}=0x2031 +phy_chain_rx_polarity_flip_physical{169.0}=0x0 +phy_chain_rx_polarity_flip_physical{170.0}=0x1 +phy_chain_rx_polarity_flip_physical{171.0}=0x0 +phy_chain_rx_polarity_flip_physical{172.0}=0x0 +phy_chain_tx_polarity_flip_physical{169.0}=0x1 +phy_chain_tx_polarity_flip_physical{170.0}=0x0 +phy_chain_tx_polarity_flip_physical{171.0}=0x0 +phy_chain_tx_polarity_flip_physical{172.0}=0x0 +#Port50 +#FC46 +portmap_82=185:100 +phy_chain_rx_lane_map_physical{185.0}=0x2310 +phy_chain_tx_lane_map_physical{185.0}=0x3021 +phy_chain_rx_polarity_flip_physical{185.0}=0x1 +phy_chain_rx_polarity_flip_physical{186.0}=0x0 +phy_chain_rx_polarity_flip_physical{187.0}=0x1 +phy_chain_rx_polarity_flip_physical{188.0}=0x0 +phy_chain_tx_polarity_flip_physical{185.0}=0x0 +phy_chain_tx_polarity_flip_physical{186.0}=0x1 +phy_chain_tx_polarity_flip_physical{187.0}=0x0 +phy_chain_tx_polarity_flip_physical{188.0}=0x0 +#Port51 +#FC44 +portmap_80=177:100 +phy_chain_rx_lane_map_physical{177.0}=0x1032 +phy_chain_tx_lane_map_physical{177.0}=0x2301 +phy_chain_rx_polarity_flip_physical{177.0}=0x1 +phy_chain_rx_polarity_flip_physical{178.0}=0x1 +phy_chain_rx_polarity_flip_physical{179.0}=0x0 +phy_chain_rx_polarity_flip_physical{180.0}=0x1 +phy_chain_tx_polarity_flip_physical{177.0}=0x1 +phy_chain_tx_polarity_flip_physical{178.0}=0x1 +phy_chain_tx_polarity_flip_physical{179.0}=0x1 +phy_chain_tx_polarity_flip_physical{180.0}=0x0 +#Port52 +#FC6 +portmap_7=25:100 +phy_chain_rx_lane_map_physical{25.0}=0x3102 +phy_chain_tx_lane_map_physical{25.0}=0x0132 +phy_chain_rx_polarity_flip_physical{25.0}=0x0 +phy_chain_rx_polarity_flip_physical{26.0}=0x0 +phy_chain_rx_polarity_flip_physical{27.0}=0x1 +phy_chain_rx_polarity_flip_physical{28.0}=0x0 +phy_chain_tx_polarity_flip_physical{25.0}=0x0 +phy_chain_tx_polarity_flip_physical{26.0}=0x1 +phy_chain_tx_polarity_flip_physical{27.0}=0x0 +phy_chain_tx_polarity_flip_physical{28.0}=0x1 +#Port53 +#FC4 +portmap_5=17:100 +phy_chain_rx_lane_map_physical{17.0}=0x3120 +phy_chain_tx_lane_map_physical{17.0}=0x3021 +phy_chain_rx_polarity_flip_physical{17.0}=0x0 +phy_chain_rx_polarity_flip_physical{18.0}=0x1 +phy_chain_rx_polarity_flip_physical{19.0}=0x0 +phy_chain_rx_polarity_flip_physical{20.0}=0x0 +phy_chain_tx_polarity_flip_physical{17.0}=0x0 +phy_chain_tx_polarity_flip_physical{18.0}=0x0 +phy_chain_tx_polarity_flip_physical{19.0}=0x1 +phy_chain_tx_polarity_flip_physical{20.0}=0x0 +#Port54 +#FC0 +portmap_1=1:100 +phy_chain_rx_lane_map_physical{1.0}=0x2130 +phy_chain_tx_lane_map_physical{1.0}=0x1203 +phy_chain_rx_polarity_flip_physical{1.0}=0x1 +phy_chain_rx_polarity_flip_physical{2.0}=0x0 +phy_chain_rx_polarity_flip_physical{3.0}=0x1 +phy_chain_rx_polarity_flip_physical{4.0}=0x1 +phy_chain_tx_polarity_flip_physical{1.0}=0x0 +phy_chain_tx_polarity_flip_physical{2.0}=0x0 +phy_chain_tx_polarity_flip_physical{3.0}=0x0 +phy_chain_tx_polarity_flip_physical{4.0}=0x1 +#Port55 +#FC2 +portmap_3=9:100 +phy_chain_rx_lane_map_physical{9.0}=0x1203 +phy_chain_tx_lane_map_physical{9.0}=0x1230 +phy_chain_rx_polarity_flip_physical{9.0}=0x0 +phy_chain_rx_polarity_flip_physical{10.0}=0x1 +phy_chain_rx_polarity_flip_physical{11.0}=0x0 +phy_chain_rx_polarity_flip_physical{12.0}=0x0 +phy_chain_tx_polarity_flip_physical{9.0}=0x1 +phy_chain_tx_polarity_flip_physical{10.0}=0x0 +phy_chain_tx_polarity_flip_physical{11.0}=0x1 +phy_chain_tx_polarity_flip_physical{12.0}=0x0 +#Port56 +#FC48 +portmap_102=193:100 +phy_chain_rx_lane_map_physical{193.0}=0x2103 +phy_chain_tx_lane_map_physical{193.0}=0x1230 +phy_chain_rx_polarity_flip_physical{193.0}=0x0 +phy_chain_rx_polarity_flip_physical{194.0}=0x1 +phy_chain_rx_polarity_flip_physical{195.0}=0x0 +phy_chain_rx_polarity_flip_physical{196.0}=0x1 +phy_chain_tx_polarity_flip_physical{193.0}=0x0 +phy_chain_tx_polarity_flip_physical{194.0}=0x0 +phy_chain_tx_polarity_flip_physical{195.0}=0x1 +phy_chain_tx_polarity_flip_physical{196.0}=0x0 +#Port57 +#FC50 +portmap_104=201:100 +phy_chain_rx_lane_map_physical{201.0}=0x0321 +phy_chain_tx_lane_map_physical{201.0}=0x3021 +phy_chain_rx_polarity_flip_physical{201.0}=0x0 +phy_chain_rx_polarity_flip_physical{202.0}=0x0 +phy_chain_rx_polarity_flip_physical{203.0}=0x1 +phy_chain_rx_polarity_flip_physical{204.0}=0x0 +phy_chain_tx_polarity_flip_physical{201.0}=0x1 +phy_chain_tx_polarity_flip_physical{202.0}=0x1 +phy_chain_tx_polarity_flip_physical{203.0}=0x0 +phy_chain_tx_polarity_flip_physical{204.0}=0x1 +#Port58 +#FC54 +portmap_108=217:100 +phy_chain_rx_lane_map_physical{217.0}=0x1203 +phy_chain_tx_lane_map_physical{217.0}=0x2031 +phy_chain_rx_polarity_flip_physical{217.0}=0x1 +phy_chain_rx_polarity_flip_physical{218.0}=0x0 +phy_chain_rx_polarity_flip_physical{219.0}=0x1 +phy_chain_rx_polarity_flip_physical{220.0}=0x1 +phy_chain_tx_polarity_flip_physical{217.0}=0x1 +phy_chain_tx_polarity_flip_physical{218.0}=0x0 +phy_chain_tx_polarity_flip_physical{219.0}=0x1 +phy_chain_tx_polarity_flip_physical{220.0}=0x0 +#Port59 +#FC52 +portmap_106=209:100 +phy_chain_rx_lane_map_physical{209.0}=0x0321 +phy_chain_tx_lane_map_physical{209.0}=0x3102 +phy_chain_rx_polarity_flip_physical{209.0}=0x0 +phy_chain_rx_polarity_flip_physical{210.0}=0x0 +phy_chain_rx_polarity_flip_physical{211.0}=0x1 +phy_chain_rx_polarity_flip_physical{212.0}=0x0 +phy_chain_tx_polarity_flip_physical{209.0}=0x0 +phy_chain_tx_polarity_flip_physical{210.0}=0x0 +phy_chain_tx_polarity_flip_physical{211.0}=0x1 +phy_chain_tx_polarity_flip_physical{212.0}=0x0 +#Port60 +#FC56 +portmap_110=225:100 +phy_chain_rx_lane_map_physical{225.0}=0x2103 +phy_chain_tx_lane_map_physical{225.0}=0x2031 +phy_chain_rx_polarity_flip_physical{225.0}=0x0 +phy_chain_rx_polarity_flip_physical{226.0}=0x0 +phy_chain_rx_polarity_flip_physical{227.0}=0x1 +phy_chain_rx_polarity_flip_physical{228.0}=0x1 +phy_chain_tx_polarity_flip_physical{225.0}=0x1 +phy_chain_tx_polarity_flip_physical{226.0}=0x0 +phy_chain_tx_polarity_flip_physical{227.0}=0x1 +phy_chain_tx_polarity_flip_physical{228.0}=0x1 +#Port61 +#FC58 +portmap_112=233:100 +phy_chain_rx_lane_map_physical{233.0}=0x2130 +phy_chain_tx_lane_map_physical{233.0}=0x0312 +phy_chain_rx_polarity_flip_physical{233.0}=0x0 +phy_chain_rx_polarity_flip_physical{234.0}=0x1 +phy_chain_rx_polarity_flip_physical{235.0}=0x1 +phy_chain_rx_polarity_flip_physical{236.0}=0x0 +phy_chain_tx_polarity_flip_physical{233.0}=0x0 +phy_chain_tx_polarity_flip_physical{234.0}=0x0 +phy_chain_tx_polarity_flip_physical{235.0}=0x1 +phy_chain_tx_polarity_flip_physical{236.0}=0x0 +#Port62 +#FC62 +portmap_116=249:100 +phy_chain_rx_lane_map_physical{249.0}=0x1302 +phy_chain_tx_lane_map_physical{249.0}=0x1302 +phy_chain_rx_polarity_flip_physical{249.0}=0x0 +phy_chain_rx_polarity_flip_physical{250.0}=0x1 +phy_chain_rx_polarity_flip_physical{251.0}=0x0 +phy_chain_rx_polarity_flip_physical{252.0}=0x1 +phy_chain_tx_polarity_flip_physical{249.0}=0x1 +phy_chain_tx_polarity_flip_physical{250.0}=0x1 +phy_chain_tx_polarity_flip_physical{251.0}=0x1 +phy_chain_tx_polarity_flip_physical{252.0}=0x1 +#Port63 +#FC60 +portmap_114=241:100 +phy_chain_rx_lane_map_physical{241.0}=0x3012 +phy_chain_tx_lane_map_physical{241.0}=0x2301 +phy_chain_rx_polarity_flip_physical{241.0}=0x1 +phy_chain_rx_polarity_flip_physical{242.0}=0x1 +phy_chain_rx_polarity_flip_physical{243.0}=0x0 +phy_chain_rx_polarity_flip_physical{244.0}=0x1 +phy_chain_tx_polarity_flip_physical{241.0}=0x1 +phy_chain_tx_polarity_flip_physical{242.0}=0x0 +phy_chain_tx_polarity_flip_physical{243.0}=0x1 +phy_chain_tx_polarity_flip_physical{244.0}=0x0 diff --git a/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/sai.profile b/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/sai.profile index e06f3ba3a4b1..6479c4c14d3f 100644 --- a/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/sai.profile +++ b/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/td2-a7050-qx32s-32x40G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/td2-a7050-qx32s-32x40G.config.bcm diff --git a/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/td2-a7050-qx32s-32x40G.config.bcm b/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/td2-a7050-qx32s-32x40G.config.bcm new file mode 100644 index 000000000000..2e907dc1c72c --- /dev/null +++ b/device/arista/x86_64-arista_7050_qx32s/Arista-7050-QX-32S/td2-a7050-qx32s-32x40G.config.bcm @@ -0,0 +1,745 @@ +#/****************************************************************************** +# * +# * File: config.bcm.clearlake (7050-QX32S) +# * Name: +# * +# * Description: This file contains SDK properties for an Arista +# * Clearlake platform. +# * +# *----------------------------------------------------------------------------- +# ******************************************************************************/ +#################################################################### +# BCM Config file for Clearlake platform +# - 32x40g Portmode + +# ALPM enable +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +l2_mem_entries=32768 +l3_mem_entries=16384 + +# From old config file +os=unix +higig2_hdr_mode=1 + +# Parity +parity_correction=1 +parity_enable=1 +stat_if_parity_enable=0 + +# l2 thread related config vars +l2xmsg_hostbuf_size=8192 +l2xmsg_mode=1 + +bcm_num_cos=8 +bcm_stat_interval=2000000 +lls_num_l2uc=12 +max_vp_lags=0 +miim_intr_enable=0 +mmu_lossless=0 +module_64ports=0 + +scache_filename=/tmp/scache +stable_size=0x2000000 + +schan_intr_enable=0 +tdma_timeout_usec=5000000 +tslam_timeout_usec=15000000 +cdma_timeout_usec=15000000 +dma_desc_timeout_usec=15000000 + +############################### +serdes_fiber_pref=1 +############################### +mdio_output_delay=0x0d +############################### +xgxs_lcpll_xtal_refclk=1 +tdma_intr_enable=1 +tslam_intr_enable=1 +table_dma_enable=1 + +pbmp_oversubscribe.0=0x1fffffffffffffffffffffffffe +pbmp_xport_xe.0=0x1fffffffffffffffffffffffffe +phy_an_c37_1.0=3 +phy_an_c37_5.0=3 +phy_an_c37_9.0=3 +phy_an_c37_13.0=3 +phy_an_c37_17.0=3 +phy_an_c37_21.0=3 +phy_an_c37_25.0=3 +phy_an_c37_29.0=3 +phy_an_c37_33.0=3 +phy_an_c37_37.0=3 +phy_an_c37_41.0=3 +phy_an_c37_45.0=3 +phy_an_c37_49.0=3 +phy_an_c37_53.0=3 +phy_an_c37_57.0=3 +phy_an_c37_61.0=3 +phy_an_c37_65.0=3 +phy_an_c37_69.0=3 +phy_an_c37_73.0=3 +phy_an_c37_77.0=3 +phy_an_c37_81.0=3 +phy_an_c37_85.0=3 +phy_an_c37_89.0=3 +phy_an_c37_93.0=3 +phy_an_c37_97.0=0 +phy_an_c37_98.0=0 +phy_an_c37_99.0=0 +phy_an_c37_100.0=0 +phy_an_c37_101.0=0 +phy_an_c37_102.0=0 +phy_an_c37_103.0=0 +phy_an_c37_104.0=0 +phy_an_c73_1.0=0 +phy_an_c73_5.0=0 +phy_an_c73_9.0=0 +phy_an_c73_13.0=0 +phy_an_c73_17.0=0 +phy_an_c73_21.0=0 +phy_an_c73_25.0=0 +phy_an_c73_29.0=0 +phy_an_c73_33.0=0 +phy_an_c73_37.0=0 +phy_an_c73_41.0=0 +phy_an_c73_45.0=0 +phy_an_c73_49.0=0 +phy_an_c73_53.0=0 +phy_an_c73_57.0=0 +phy_an_c73_61.0=0 +phy_an_c73_65.0=0 +phy_an_c73_69.0=0 +phy_an_c73_73.0=0 +phy_an_c73_77.0=0 +phy_an_c73_81.0=0 +phy_an_c73_85.0=0 +phy_an_c73_89.0=0 +phy_an_c73_93.0=0 +phy_an_c73_97.0=2 +phy_an_c73_98.0=2 +phy_an_c73_99.0=2 +phy_an_c73_100.0=2 +phy_an_c73_101.0=2 +phy_an_c73_102.0=2 +phy_an_c73_103.0=2 +phy_an_c73_104.0=2 +phy_xaui_rx_polarity_flip_1.0=0x0 +phy_xaui_rx_polarity_flip_5.0=0x0 +phy_xaui_rx_polarity_flip_9.0=0x4 +phy_xaui_rx_polarity_flip_13.0=0x0 +phy_xaui_rx_polarity_flip_17.0=0xb +phy_xaui_rx_polarity_flip_21.0=0x3 +phy_xaui_rx_polarity_flip_25.0=0xb +phy_xaui_rx_polarity_flip_29.0=0xf +phy_xaui_rx_polarity_flip_33.0=0xb +phy_xaui_rx_polarity_flip_37.0=0x3 +phy_xaui_rx_polarity_flip_41.0=0xb +phy_xaui_rx_polarity_flip_45.0=0x0 +phy_xaui_rx_polarity_flip_49.0=0x4 +phy_xaui_rx_polarity_flip_53.0=0xc +phy_xaui_rx_polarity_flip_57.0=0x4 +phy_xaui_rx_polarity_flip_61.0=0x0 +phy_xaui_rx_polarity_flip_65.0=0xb +phy_xaui_rx_polarity_flip_69.0=0x3 +phy_xaui_rx_polarity_flip_73.0=0xb +phy_xaui_rx_polarity_flip_77.0=0xf +phy_xaui_rx_polarity_flip_81.0=0xb +phy_xaui_rx_polarity_flip_85.0=0x3 +phy_xaui_rx_polarity_flip_89.0=0x4 +phy_xaui_rx_polarity_flip_93.0=0x0 +phy_xaui_rx_polarity_flip_97.0=0xb +phy_xaui_rx_polarity_flip_98.0=0x3 +phy_xaui_rx_polarity_flip_99.0=0x4 +phy_xaui_rx_polarity_flip_100.0=0x0 +phy_xaui_rx_polarity_flip_101.0=0x0 +phy_xaui_rx_polarity_flip_102.0=0xe +phy_xaui_rx_polarity_flip_103.0=0x0 +phy_xaui_rx_polarity_flip_104.0=0x0 +phy_xaui_tx_polarity_flip_1.0=0x0 +phy_xaui_tx_polarity_flip_5.0=0x0 +phy_xaui_tx_polarity_flip_9.0=0x2 +phy_xaui_tx_polarity_flip_13.0=0x0 +phy_xaui_tx_polarity_flip_17.0=0xd +phy_xaui_tx_polarity_flip_21.0=0xc +phy_xaui_tx_polarity_flip_25.0=0xd +phy_xaui_tx_polarity_flip_29.0=0xf +phy_xaui_tx_polarity_flip_33.0=0xd +phy_xaui_tx_polarity_flip_37.0=0xc +phy_xaui_tx_polarity_flip_41.0=0xd +phy_xaui_tx_polarity_flip_45.0=0x0 +phy_xaui_tx_polarity_flip_49.0=0x2 +phy_xaui_tx_polarity_flip_53.0=0x3 +phy_xaui_tx_polarity_flip_57.0=0x2 +phy_xaui_tx_polarity_flip_61.0=0x0 +phy_xaui_tx_polarity_flip_65.0=0xd +phy_xaui_tx_polarity_flip_69.0=0xc +phy_xaui_tx_polarity_flip_73.0=0xd +phy_xaui_tx_polarity_flip_77.0=0xf +phy_xaui_tx_polarity_flip_81.0=0xd +phy_xaui_tx_polarity_flip_85.0=0xc +phy_xaui_tx_polarity_flip_89.0=0x2 +phy_xaui_tx_polarity_flip_93.0=0x0 +phy_xaui_tx_polarity_flip_97.0=0xd +phy_xaui_tx_polarity_flip_98.0=0xc +phy_xaui_tx_polarity_flip_99.0=0x2 +phy_xaui_tx_polarity_flip_100.0=0x0 +phy_xaui_tx_polarity_flip_101.0=0x0 +phy_xaui_tx_polarity_flip_102.0=0x7 +phy_xaui_tx_polarity_flip_103.0=0x2 +phy_xaui_tx_polarity_flip_104.0=0x0 +port_init_autoneg_1.0=0 +port_init_autoneg_5.0=0 +port_init_autoneg_9.0=0 +port_init_autoneg_13.0=0 +port_init_autoneg_17.0=0 +port_init_autoneg_21.0=0 +port_init_autoneg_25.0=0 +port_init_autoneg_29.0=0 +port_init_autoneg_33.0=0 +port_init_autoneg_37.0=0 +port_init_autoneg_41.0=0 +port_init_autoneg_45.0=0 +port_init_autoneg_49.0=0 +port_init_autoneg_53.0=0 +port_init_autoneg_57.0=0 +port_init_autoneg_61.0=0 +port_init_autoneg_65.0=0 +port_init_autoneg_69.0=0 +port_init_autoneg_73.0=0 +port_init_autoneg_77.0=0 +port_init_autoneg_81.0=0 +port_init_autoneg_85.0=0 +port_init_autoneg_89.0=0 +port_init_autoneg_93.0=0 +port_init_autoneg_97.0=0 +port_init_autoneg_98.0=0 +port_init_autoneg_99.0=0 +port_init_autoneg_100.0=0 +port_init_autoneg_101.0=0 +port_init_autoneg_102.0=0 +port_init_autoneg_103.0=0 +port_init_autoneg_104.0=0 +port_init_cl72_hg.0=0x11 +port_phy_addr_1.0=0x7f +port_phy_addr_5.0=0x7f +port_phy_addr_9.0=0x7f +port_phy_addr_13.0=0x7f +port_phy_addr_17.0=0x7f +port_phy_addr_21.0=0x7f +port_phy_addr_25.0=0x7f +port_phy_addr_29.0=0x7f +port_phy_addr_33.0=0x7f +port_phy_addr_37.0=0x7f +port_phy_addr_41.0=0x7f +port_phy_addr_45.0=0x7f +port_phy_addr_49.0=0x7f +port_phy_addr_53.0=0x7f +port_phy_addr_57.0=0x7f +port_phy_addr_61.0=0x7f +port_phy_addr_65.0=0x7f +port_phy_addr_69.0=0x7f +port_phy_addr_73.0=0x7f +port_phy_addr_77.0=0x7f +port_phy_addr_81.0=0x7f +port_phy_addr_85.0=0x7f +port_phy_addr_89.0=0x7f +port_phy_addr_93.0=0x7f +port_phy_addr_97.0=0x7f +port_phy_addr_98.0=0x7f +port_phy_addr_99.0=0x7f +port_phy_addr_100.0=0x7f +port_phy_addr_101.0=0x7f +port_phy_addr_102.0=0x7f +port_phy_addr_103.0=0x7f +port_phy_addr_104.0=0x7f +portmap_1.0=9:40 +portmap_5.0=13:40 +portmap_9.0=17:40 +portmap_13.0=21:40 +portmap_17.0=29:40 +portmap_21.0=25:40 +portmap_25.0=33:40 +portmap_29.0=37:40 +portmap_33.0=45:40 +portmap_37.0=41:40 +portmap_41.0=49:40 +portmap_45.0=53:40 +portmap_49.0=69:40 +portmap_53.0=65:40 +portmap_57.0=73:40 +portmap_61.0=77:40 +portmap_65.0=93:40 +portmap_69.0=89:40 +portmap_73.0=97:40 +portmap_77.0=101:40 +portmap_81.0=109:40 +portmap_85.0=105:40 +portmap_89.0=121:40 +portmap_93.0=125:40 +portmap_97.0=61:40 +portmap_98.0=57:40 +portmap_99.0=81:40 +portmap_100.0=85:40 +portmap_101.0=117:40 +portmap_102.0=113:40 +portmap_103.0=1:40 +portmap_104.0=5:40 +serdes_firmware_mode_1.0=2 +serdes_firmware_mode_5.0=2 +serdes_firmware_mode_9.0=2 +serdes_firmware_mode_13.0=2 +serdes_firmware_mode_17.0=2 +serdes_firmware_mode_21.0=2 +serdes_firmware_mode_25.0=2 +serdes_firmware_mode_29.0=2 +serdes_firmware_mode_33.0=2 +serdes_firmware_mode_37.0=2 +serdes_firmware_mode_41.0=2 +serdes_firmware_mode_45.0=2 +serdes_firmware_mode_49.0=2 +serdes_firmware_mode_53.0=2 +serdes_firmware_mode_57.0=2 +serdes_firmware_mode_61.0=2 +serdes_firmware_mode_65.0=2 +serdes_firmware_mode_69.0=2 +serdes_firmware_mode_73.0=2 +serdes_firmware_mode_77.0=2 +serdes_firmware_mode_81.0=2 +serdes_firmware_mode_85.0=2 +serdes_firmware_mode_89.0=2 +serdes_firmware_mode_93.0=2 +serdes_firmware_mode_97.0=2 +serdes_firmware_mode_98.0=2 +serdes_firmware_mode_99.0=2 +serdes_firmware_mode_100.0=2 +serdes_firmware_mode_101.0=2 +serdes_firmware_mode_102.0=2 +serdes_firmware_mode_103.0=2 +serdes_firmware_mode_104.0=2 +xgxs_rx_lane_map_1.0=0x0123 +xgxs_rx_lane_map_5.0=0x0321 +xgxs_rx_lane_map_9.0=0x1302 +xgxs_rx_lane_map_13.0=0x0213 +xgxs_rx_lane_map_17.0=0x1302 +xgxs_rx_lane_map_21.0=0x1302 +xgxs_rx_lane_map_25.0=0x1302 +xgxs_rx_lane_map_29.0=0x0213 +xgxs_rx_lane_map_33.0=0x1302 +xgxs_rx_lane_map_37.0=0x1302 +xgxs_rx_lane_map_41.0=0x1302 +xgxs_rx_lane_map_45.0=0x0213 +xgxs_rx_lane_map_49.0=0x1302 +xgxs_rx_lane_map_53.0=0x1302 +xgxs_rx_lane_map_57.0=0x1302 +xgxs_rx_lane_map_61.0=0x0213 +xgxs_rx_lane_map_65.0=0x1302 +xgxs_rx_lane_map_69.0=0x1302 +xgxs_rx_lane_map_73.0=0x1302 +xgxs_rx_lane_map_77.0=0x0213 +xgxs_rx_lane_map_81.0=0x1302 +xgxs_rx_lane_map_85.0=0x1302 +xgxs_rx_lane_map_89.0=0x1302 +xgxs_rx_lane_map_93.0=0x0213 +xgxs_rx_lane_map_97.0=0x1302 +xgxs_rx_lane_map_98.0=0x1302 +xgxs_rx_lane_map_99.0=0x1302 +xgxs_rx_lane_map_100.0=0x0213 +xgxs_rx_lane_map_101.0=0x0213 +xgxs_rx_lane_map_102.0=0x1302 +xgxs_rx_lane_map_103.0=0x0123 +xgxs_rx_lane_map_104.0=0x2031 +xgxs_tx_lane_map_1.0=0x3210 +xgxs_tx_lane_map_5.0=0x0321 +xgxs_tx_lane_map_9.0=0x2031 +xgxs_tx_lane_map_13.0=0x0213 +xgxs_tx_lane_map_17.0=0x2031 +xgxs_tx_lane_map_21.0=0x2031 +xgxs_tx_lane_map_25.0=0x2031 +xgxs_tx_lane_map_29.0=0x0213 +xgxs_tx_lane_map_33.0=0x2031 +xgxs_tx_lane_map_37.0=0x2031 +xgxs_tx_lane_map_41.0=0x2031 +xgxs_tx_lane_map_45.0=0x0213 +xgxs_tx_lane_map_49.0=0x2031 +xgxs_tx_lane_map_53.0=0x2031 +xgxs_tx_lane_map_57.0=0x2031 +xgxs_tx_lane_map_61.0=0x0213 +xgxs_tx_lane_map_65.0=0x2031 +xgxs_tx_lane_map_69.0=0x2031 +xgxs_tx_lane_map_73.0=0x2031 +xgxs_tx_lane_map_77.0=0x0213 +xgxs_tx_lane_map_81.0=0x2031 +xgxs_tx_lane_map_85.0=0x2031 +xgxs_tx_lane_map_89.0=0x2031 +xgxs_tx_lane_map_93.0=0x0213 +xgxs_tx_lane_map_97.0=0x2031 +xgxs_tx_lane_map_98.0=0x2031 +xgxs_tx_lane_map_99.0=0x2031 +xgxs_tx_lane_map_100.0=0x0213 +xgxs_tx_lane_map_101.0=0x0213 +xgxs_tx_lane_map_102.0=0x2031 +xgxs_tx_lane_map_103.0=0x3120 +xgxs_tx_lane_map_104.0=0x1302 + +# tuning parameters +serdes_preemphasis_lane0_1.0=0x81f7 +serdes_preemphasis_lane1_1.0=0x81f7 +serdes_preemphasis_lane2_1.0=0x81f7 +serdes_preemphasis_lane3_1.0=0x81f7 +serdes_pre_driver_current_lane0_5.0=0x7 +serdes_driver_current_lane0_5.0=0x7 +serdes_preemphasis_lane0_5.0=0xc2f0 +serdes_pre_driver_current_lane1_5.0=0x7 +serdes_driver_current_lane1_5.0=0x7 +serdes_preemphasis_lane1_5.0=0xc2f0 +serdes_pre_driver_current_lane2_5.0=0x7 +serdes_driver_current_lane2_5.0=0x7 +serdes_preemphasis_lane2_5.0=0xc2f0 +serdes_pre_driver_current_lane3_5.0=0x7 +serdes_driver_current_lane3_5.0=0x7 +serdes_preemphasis_lane3_5.0=0xc2f0 +serdes_pre_driver_current_lane0_9.0=0x7 +serdes_driver_current_lane0_9.0=0x7 +serdes_preemphasis_lane0_9.0=0xbb10 +serdes_pre_driver_current_lane1_9.0=0x7 +serdes_driver_current_lane1_9.0=0x7 +serdes_preemphasis_lane1_9.0=0xbb10 +serdes_pre_driver_current_lane2_9.0=0x7 +serdes_driver_current_lane2_9.0=0x7 +serdes_preemphasis_lane2_9.0=0xbb10 +serdes_pre_driver_current_lane3_9.0=0x7 +serdes_driver_current_lane3_9.0=0x7 +serdes_preemphasis_lane3_9.0=0xbb10 +serdes_pre_driver_current_lane0_13.0=0x7 +serdes_driver_current_lane0_13.0=0x7 +serdes_preemphasis_lane0_13.0=0xbb10 +serdes_pre_driver_current_lane1_13.0=0x7 +serdes_driver_current_lane1_13.0=0x7 +serdes_preemphasis_lane1_13.0=0xbb10 +serdes_pre_driver_current_lane2_13.0=0x7 +serdes_driver_current_lane2_13.0=0x7 +serdes_preemphasis_lane2_13.0=0xbb10 +serdes_pre_driver_current_lane3_13.0=0x7 +serdes_driver_current_lane3_13.0=0x7 +serdes_preemphasis_lane3_13.0=0xbb10 +serdes_pre_driver_current_lane0_17.0=0x6 +serdes_driver_current_lane0_17.0=0x6 +serdes_preemphasis_lane0_17.0=0xb720 +serdes_pre_driver_current_lane1_17.0=0x6 +serdes_driver_current_lane1_17.0=0x6 +serdes_preemphasis_lane1_17.0=0xb720 +serdes_pre_driver_current_lane2_17.0=0x6 +serdes_driver_current_lane2_17.0=0x6 +serdes_preemphasis_lane2_17.0=0xb720 +serdes_pre_driver_current_lane3_17.0=0x6 +serdes_driver_current_lane3_17.0=0x6 +serdes_preemphasis_lane3_17.0=0xb720 +serdes_pre_driver_current_lane0_21.0=0x7 +serdes_driver_current_lane0_21.0=0x7 +serdes_preemphasis_lane0_21.0=0xbb10 +serdes_pre_driver_current_lane1_21.0=0x7 +serdes_driver_current_lane1_21.0=0x7 +serdes_preemphasis_lane1_21.0=0xbb10 +serdes_pre_driver_current_lane2_21.0=0x7 +serdes_driver_current_lane2_21.0=0x7 +serdes_preemphasis_lane2_21.0=0xbb10 +serdes_pre_driver_current_lane3_21.0=0x7 +serdes_driver_current_lane3_21.0=0x7 +serdes_preemphasis_lane3_21.0=0xbb10 +serdes_pre_driver_current_lane0_25.0=0x5 +serdes_driver_current_lane0_25.0=0x5 +serdes_preemphasis_lane0_25.0=0xb720 +serdes_pre_driver_current_lane1_25.0=0x5 +serdes_driver_current_lane1_25.0=0x5 +serdes_preemphasis_lane1_25.0=0xb720 +serdes_pre_driver_current_lane2_25.0=0x5 +serdes_driver_current_lane2_25.0=0x5 +serdes_preemphasis_lane2_25.0=0xb720 +serdes_pre_driver_current_lane3_25.0=0x5 +serdes_driver_current_lane3_25.0=0x5 +serdes_preemphasis_lane3_25.0=0xb720 +serdes_pre_driver_current_lane0_29.0=0x5 +serdes_driver_current_lane0_29.0=0x5 +serdes_preemphasis_lane0_29.0=0xb720 +serdes_pre_driver_current_lane1_29.0=0x5 +serdes_driver_current_lane1_29.0=0x5 +serdes_preemphasis_lane1_29.0=0xb720 +serdes_pre_driver_current_lane2_29.0=0x5 +serdes_driver_current_lane2_29.0=0x5 +serdes_preemphasis_lane2_29.0=0xb720 +serdes_pre_driver_current_lane3_29.0=0x5 +serdes_driver_current_lane3_29.0=0x5 +serdes_preemphasis_lane3_29.0=0xb720 +serdes_pre_driver_current_lane0_33.0=0x4 +serdes_driver_current_lane0_33.0=0x4 +serdes_preemphasis_lane0_33.0=0xb720 +serdes_pre_driver_current_lane1_33.0=0x4 +serdes_driver_current_lane1_33.0=0x4 +serdes_preemphasis_lane1_33.0=0xb720 +serdes_pre_driver_current_lane2_33.0=0x4 +serdes_driver_current_lane2_33.0=0x4 +serdes_preemphasis_lane2_33.0=0xb720 +serdes_pre_driver_current_lane3_33.0=0x4 +serdes_driver_current_lane3_33.0=0x4 +serdes_preemphasis_lane3_33.0=0xb720 +serdes_pre_driver_current_lane0_37.0=0x5 +serdes_driver_current_lane0_37.0=0x5 +serdes_preemphasis_lane0_37.0=0xb720 +serdes_pre_driver_current_lane1_37.0=0x5 +serdes_driver_current_lane1_37.0=0x5 +serdes_preemphasis_lane1_37.0=0xb720 +serdes_pre_driver_current_lane2_37.0=0x5 +serdes_driver_current_lane2_37.0=0x5 +serdes_preemphasis_lane2_37.0=0xb720 +serdes_pre_driver_current_lane3_37.0=0x5 +serdes_driver_current_lane3_37.0=0x5 +serdes_preemphasis_lane3_37.0=0xb720 +serdes_pre_driver_current_lane0_41.0=0x3 +serdes_driver_current_lane0_41.0=0x3 +serdes_preemphasis_lane0_41.0=0xb330 +serdes_pre_driver_current_lane1_41.0=0x3 +serdes_driver_current_lane1_41.0=0x3 +serdes_preemphasis_lane1_41.0=0xb330 +serdes_pre_driver_current_lane2_41.0=0x3 +serdes_driver_current_lane2_41.0=0x3 +serdes_preemphasis_lane2_41.0=0xb330 +serdes_pre_driver_current_lane3_41.0=0x3 +serdes_driver_current_lane3_41.0=0x3 +serdes_preemphasis_lane3_41.0=0xb330 +serdes_pre_driver_current_lane0_45.0=0x4 +serdes_driver_current_lane0_45.0=0x4 +serdes_preemphasis_lane0_45.0=0xb720 +serdes_pre_driver_current_lane1_45.0=0x4 +serdes_driver_current_lane1_45.0=0x4 +serdes_preemphasis_lane1_45.0=0xb720 +serdes_pre_driver_current_lane2_45.0=0x4 +serdes_driver_current_lane2_45.0=0x4 +serdes_preemphasis_lane2_45.0=0xb720 +serdes_pre_driver_current_lane3_45.0=0x4 +serdes_driver_current_lane3_45.0=0x4 +serdes_preemphasis_lane3_45.0=0xb720 +serdes_pre_driver_current_lane0_49.0=0x3 +serdes_driver_current_lane0_49.0=0x3 +serdes_preemphasis_lane0_49.0=0xb330 +serdes_pre_driver_current_lane1_49.0=0x3 +serdes_driver_current_lane1_49.0=0x3 +serdes_preemphasis_lane1_49.0=0xb330 +serdes_pre_driver_current_lane2_49.0=0x3 +serdes_driver_current_lane2_49.0=0x3 +serdes_preemphasis_lane2_49.0=0xb330 +serdes_pre_driver_current_lane3_49.0=0x3 +serdes_driver_current_lane3_49.0=0x3 +serdes_preemphasis_lane3_49.0=0xb330 +serdes_pre_driver_current_lane0_53.0=0x4 +serdes_driver_current_lane0_53.0=0x4 +serdes_preemphasis_lane0_53.0=0xb720 +serdes_pre_driver_current_lane1_53.0=0x4 +serdes_driver_current_lane1_53.0=0x4 +serdes_preemphasis_lane1_53.0=0xb720 +serdes_pre_driver_current_lane2_53.0=0x4 +serdes_driver_current_lane2_53.0=0x4 +serdes_preemphasis_lane2_53.0=0xb720 +serdes_pre_driver_current_lane3_53.0=0x4 +serdes_driver_current_lane3_53.0=0x4 +serdes_preemphasis_lane3_53.0=0xb720 +serdes_pre_driver_current_lane0_57.0=0x3 +serdes_driver_current_lane0_57.0=0x3 +serdes_preemphasis_lane0_57.0=0xb330 +serdes_pre_driver_current_lane1_57.0=0x3 +serdes_driver_current_lane1_57.0=0x3 +serdes_preemphasis_lane1_57.0=0xb330 +serdes_pre_driver_current_lane2_57.0=0x3 +serdes_driver_current_lane2_57.0=0x3 +serdes_preemphasis_lane2_57.0=0xb330 +serdes_pre_driver_current_lane3_57.0=0x3 +serdes_driver_current_lane3_57.0=0x3 +serdes_preemphasis_lane3_57.0=0xb330 +serdes_pre_driver_current_lane0_61.0=0x4 +serdes_driver_current_lane0_61.0=0x4 +serdes_preemphasis_lane0_61.0=0xb720 +serdes_pre_driver_current_lane1_61.0=0x4 +serdes_driver_current_lane1_61.0=0x4 +serdes_preemphasis_lane1_61.0=0xb720 +serdes_pre_driver_current_lane2_61.0=0x4 +serdes_driver_current_lane2_61.0=0x4 +serdes_preemphasis_lane2_61.0=0xb720 +serdes_pre_driver_current_lane3_61.0=0x4 +serdes_driver_current_lane3_61.0=0x4 +serdes_preemphasis_lane3_61.0=0xb720 +serdes_pre_driver_current_lane0_65.0=0x4 +serdes_driver_current_lane0_65.0=0x4 +serdes_preemphasis_lane0_65.0=0xb720 +serdes_pre_driver_current_lane1_65.0=0x4 +serdes_driver_current_lane1_65.0=0x4 +serdes_preemphasis_lane1_65.0=0xb720 +serdes_pre_driver_current_lane2_65.0=0x4 +serdes_driver_current_lane2_65.0=0x4 +serdes_preemphasis_lane2_65.0=0xb720 +serdes_pre_driver_current_lane3_65.0=0x4 +serdes_driver_current_lane3_65.0=0x4 +serdes_preemphasis_lane3_65.0=0xb720 +serdes_pre_driver_current_lane0_69.0=0x4 +serdes_driver_current_lane0_69.0=0x4 +serdes_preemphasis_lane0_69.0=0xb720 +serdes_pre_driver_current_lane1_69.0=0x4 +serdes_driver_current_lane1_69.0=0x4 +serdes_preemphasis_lane1_69.0=0xb720 +serdes_pre_driver_current_lane2_69.0=0x4 +serdes_driver_current_lane2_69.0=0x4 +serdes_preemphasis_lane2_69.0=0xb720 +serdes_pre_driver_current_lane3_69.0=0x4 +serdes_driver_current_lane3_69.0=0x4 +serdes_preemphasis_lane3_69.0=0xb720 +serdes_pre_driver_current_lane0_73.0=0x4 +serdes_driver_current_lane0_73.0=0x4 +serdes_preemphasis_lane0_73.0=0xb720 +serdes_pre_driver_current_lane1_73.0=0x4 +serdes_driver_current_lane1_73.0=0x4 +serdes_preemphasis_lane1_73.0=0xb720 +serdes_pre_driver_current_lane2_73.0=0x4 +serdes_driver_current_lane2_73.0=0x4 +serdes_preemphasis_lane2_73.0=0xb720 +serdes_pre_driver_current_lane3_73.0=0x4 +serdes_driver_current_lane3_73.0=0x4 +serdes_preemphasis_lane3_73.0=0xb720 +serdes_pre_driver_current_lane0_77.0=0x5 +serdes_driver_current_lane0_77.0=0x5 +serdes_preemphasis_lane0_77.0=0xb720 +serdes_pre_driver_current_lane1_77.0=0x5 +serdes_driver_current_lane1_77.0=0x5 +serdes_preemphasis_lane1_77.0=0xb720 +serdes_pre_driver_current_lane2_77.0=0x5 +serdes_driver_current_lane2_77.0=0x5 +serdes_preemphasis_lane2_77.0=0xb720 +serdes_pre_driver_current_lane3_77.0=0x5 +serdes_driver_current_lane3_77.0=0x5 +serdes_preemphasis_lane3_77.0=0xb720 +serdes_pre_driver_current_lane0_81.0=0x5 +serdes_driver_current_lane0_81.0=0x5 +serdes_preemphasis_lane0_81.0=0xb720 +serdes_pre_driver_current_lane1_81.0=0x5 +serdes_driver_current_lane1_81.0=0x5 +serdes_preemphasis_lane1_81.0=0xb720 +serdes_pre_driver_current_lane2_81.0=0x5 +serdes_driver_current_lane2_81.0=0x5 +serdes_preemphasis_lane2_81.0=0xb720 +serdes_pre_driver_current_lane3_81.0=0x5 +serdes_driver_current_lane3_81.0=0x5 +serdes_preemphasis_lane3_81.0=0xb720 +serdes_pre_driver_current_lane0_85.0=0x5 +serdes_driver_current_lane0_85.0=0x5 +serdes_preemphasis_lane0_85.0=0xb720 +serdes_pre_driver_current_lane1_85.0=0x5 +serdes_driver_current_lane1_85.0=0x5 +serdes_preemphasis_lane1_85.0=0xb720 +serdes_pre_driver_current_lane2_85.0=0x5 +serdes_driver_current_lane2_85.0=0x5 +serdes_preemphasis_lane2_85.0=0xb720 +serdes_pre_driver_current_lane3_85.0=0x5 +serdes_driver_current_lane3_85.0=0x5 +serdes_preemphasis_lane3_85.0=0xb720 +serdes_pre_driver_current_lane0_89.0=0x6 +serdes_driver_current_lane0_89.0=0x6 +serdes_preemphasis_lane0_89.0=0xb720 +serdes_pre_driver_current_lane1_89.0=0x6 +serdes_driver_current_lane1_89.0=0x6 +serdes_preemphasis_lane1_89.0=0xb720 +serdes_pre_driver_current_lane2_89.0=0x6 +serdes_driver_current_lane2_89.0=0x6 +serdes_preemphasis_lane2_89.0=0xb720 +serdes_pre_driver_current_lane3_89.0=0x6 +serdes_driver_current_lane3_89.0=0x6 +serdes_preemphasis_lane3_89.0=0xb720 +serdes_pre_driver_current_lane0_93.0=0x7 +serdes_driver_current_lane0_93.0=0x7 +serdes_preemphasis_lane0_93.0=0xbb10 +serdes_pre_driver_current_lane1_93.0=0x7 +serdes_driver_current_lane1_93.0=0x7 +serdes_preemphasis_lane1_93.0=0xbb10 +serdes_pre_driver_current_lane2_93.0=0x7 +serdes_driver_current_lane2_93.0=0x7 +serdes_preemphasis_lane2_93.0=0xbb10 +serdes_pre_driver_current_lane3_93.0=0x7 +serdes_driver_current_lane3_93.0=0x7 +serdes_preemphasis_lane3_93.0=0xbb10 +serdes_pre_driver_current_lane0_97.0=0x5 +serdes_driver_current_lane0_97.0=0x5 +serdes_preemphasis_lane0_97.0=0xb720 +serdes_pre_driver_current_lane1_97.0=0x5 +serdes_driver_current_lane1_97.0=0x5 +serdes_preemphasis_lane1_97.0=0xb720 +serdes_pre_driver_current_lane2_97.0=0x5 +serdes_driver_current_lane2_97.0=0x5 +serdes_preemphasis_lane2_97.0=0xb720 +serdes_pre_driver_current_lane3_97.0=0x5 +serdes_driver_current_lane3_97.0=0x5 +serdes_preemphasis_lane3_97.0=0xb720 +serdes_pre_driver_current_lane0_98.0=0x6 +serdes_driver_current_lane0_98.0=0x6 +serdes_preemphasis_lane0_98.0=0xb720 +serdes_pre_driver_current_lane1_98.0=0x6 +serdes_driver_current_lane1_98.0=0x6 +serdes_preemphasis_lane1_98.0=0xb720 +serdes_pre_driver_current_lane2_98.0=0x6 +serdes_driver_current_lane2_98.0=0x6 +serdes_preemphasis_lane2_98.0=0xb720 +serdes_pre_driver_current_lane3_98.0=0x6 +serdes_driver_current_lane3_98.0=0x6 +serdes_preemphasis_lane3_98.0=0xb720 +serdes_pre_driver_current_lane0_99.0=0x5 +serdes_driver_current_lane0_99.0=0x5 +serdes_preemphasis_lane0_99.0=0xb720 +serdes_pre_driver_current_lane1_99.0=0x5 +serdes_driver_current_lane1_99.0=0x5 +serdes_preemphasis_lane1_99.0=0xb720 +serdes_pre_driver_current_lane2_99.0=0x5 +serdes_driver_current_lane2_99.0=0x5 +serdes_preemphasis_lane2_99.0=0xb720 +serdes_pre_driver_current_lane3_99.0=0x5 +serdes_driver_current_lane3_99.0=0x5 +serdes_preemphasis_lane3_99.0=0xb720 +serdes_pre_driver_current_lane0_100.0=0x7 +serdes_driver_current_lane0_100.0=0x7 +serdes_preemphasis_lane0_100.0=0xbb10 +serdes_pre_driver_current_lane1_100.0=0x7 +serdes_driver_current_lane1_100.0=0x7 +serdes_preemphasis_lane1_100.0=0xbb10 +serdes_pre_driver_current_lane2_100.0=0x7 +serdes_driver_current_lane2_100.0=0x7 +serdes_preemphasis_lane2_100.0=0xbb10 +serdes_pre_driver_current_lane3_100.0=0x7 +serdes_driver_current_lane3_100.0=0x7 +serdes_preemphasis_lane3_100.0=0xbb10 +serdes_pre_driver_current_lane0_101.0=0x7 +serdes_driver_current_lane0_101.0=0x7 +serdes_preemphasis_lane0_101.0=0xbb10 +serdes_pre_driver_current_lane1_101.0=0x7 +serdes_driver_current_lane1_101.0=0x7 +serdes_preemphasis_lane1_101.0=0xbb10 +serdes_pre_driver_current_lane2_101.0=0x7 +serdes_driver_current_lane2_101.0=0x7 +serdes_preemphasis_lane2_101.0=0xbb10 +serdes_pre_driver_current_lane3_101.0=0x7 +serdes_driver_current_lane3_101.0=0x7 +serdes_preemphasis_lane3_101.0=0xbb10 +serdes_pre_driver_current_lane0_102.0=0x7 +serdes_driver_current_lane0_102.0=0x7 +serdes_preemphasis_lane0_102.0=0xbb10 +serdes_pre_driver_current_lane1_102.0=0x7 +serdes_driver_current_lane1_102.0=0x7 +serdes_preemphasis_lane1_102.0=0xbb10 +serdes_pre_driver_current_lane2_102.0=0x7 +serdes_driver_current_lane2_102.0=0x7 +serdes_preemphasis_lane2_102.0=0xbb10 +serdes_pre_driver_current_lane3_102.0=0x7 +serdes_driver_current_lane3_102.0=0x7 +serdes_preemphasis_lane3_102.0=0xbb10 +serdes_preemphasis_lane0_103.0=0x81f4 +serdes_preemphasis_lane1_103.0=0x81f4 +serdes_preemphasis_lane2_103.0=0x81f4 +serdes_preemphasis_lane3_103.0=0x81f4 +serdes_preemphasis_lane0_104.0=0x81f5 +serdes_preemphasis_lane1_104.0=0x81f5 +serdes_preemphasis_lane2_104.0=0x81f5 +serdes_preemphasis_lane3_104.0=0x81f5 diff --git a/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/sai.profile b/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/sai.profile index 34d698db36b8..4f8c558b0885 100644 --- a/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/sai.profile +++ b/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-a7060-cx32s-32x100G-t1.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-a7060-cx32s-32x100G-t1.config.bcm diff --git a/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/th-a7060-cx32s-32x100G-t1.config.bcm b/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/th-a7060-cx32s-32x100G-t1.config.bcm new file mode 100644 index 000000000000..039fd955836c --- /dev/null +++ b/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-C32/th-a7060-cx32s-32x100G-t1.config.bcm @@ -0,0 +1,446 @@ +# Arista 7060CX-32S + +phy_an_allow_pll_change=1 +arl_clean_timeout_usec=15000000 +asf_mem_profile=2 +bcm_num_cos=8 +bcm_stat_flags=1 +bcm_stat_jumbo=9236 +cdma_timeout_usec=15000000 +dma_desc_timeout_usec=15000000 +higig2_hdr_mode=1 +ipv6_lpm_128b_enable=1 +l3_alpm_enable=2 +lpm_scaling_enable=0 +l2xmsg_mode=1 +max_vp_lags=0 +miim_intr_enable=0 +module_64ports=1 +os=unix +oversubscribe_mode=1 +ptp_bs_fref.0=25000000 +ptp_ts_pll_fref.0=25000000 +robust_hash_disable_egress_vlan.0=1 +robust_hash_disable_mpls.0=1 +robust_hash_disable_vlan.0=1 +tdma_timeout_usec.0=15000000 +tslam_timeout_usec.0=15000000 +pbmp_xport_xe.0=0x7ffffffffffffffffffffffffffffffffe +phy_an_allow_pll_change_hg.0=0 +phy_an_c73_1.0=1 +phy_an_c73_2.0=1 +phy_an_c73_3.0=1 +phy_an_c73_4.0=1 +phy_an_c73_5.0=1 +phy_an_c73_6.0=1 +phy_an_c73_7.0=1 +phy_an_c73_8.0=1 +phy_an_c73_34.0=1 +phy_an_c73_35.0=1 +phy_an_c73_36.0=1 +phy_an_c73_37.0=1 +phy_an_c73_38.0=1 +phy_an_c73_39.0=1 +phy_an_c73_40.0=1 +phy_an_c73_41.0=1 +phy_an_c73_68.0=1 +phy_an_c73_69.0=1 +phy_an_c73_70.0=1 +phy_an_c73_71.0=1 +phy_an_c73_72.0=1 +phy_an_c73_73.0=1 +phy_an_c73_74.0=1 +phy_an_c73_75.0=1 +phy_an_c73_102.0=1 +phy_an_c73_103.0=1 +phy_an_c73_104.0=1 +phy_an_c73_105.0=1 +phy_an_c73_106.0=1 +phy_an_c73_107.0=1 +phy_an_c73_108.0=1 +phy_an_c73_109.0=1 +phy_an_fec_1.0=1 +phy_an_fec_2.0=1 +phy_an_fec_3.0=1 +phy_an_fec_4.0=1 +phy_an_fec_5.0=1 +phy_an_fec_6.0=1 +phy_an_fec_7.0=1 +phy_an_fec_8.0=1 +phy_an_fec_9.0=1 +phy_an_fec_10.0=1 +phy_an_fec_11.0=1 +phy_an_fec_12.0=1 +phy_an_fec_13.0=1 +phy_an_fec_14.0=1 +phy_an_fec_15.0=1 +phy_an_fec_16.0=1 +phy_an_fec_17.0=1 +phy_an_fec_18.0=1 +phy_an_fec_19.0=1 +phy_an_fec_20.0=1 +phy_an_fec_21.0=1 +phy_an_fec_22.0=1 +phy_an_fec_23.0=1 +phy_an_fec_24.0=1 +phy_an_fec_25.0=1 +phy_an_fec_26.0=1 +phy_an_fec_27.0=1 +phy_an_fec_28.0=1 +phy_an_fec_29.0=1 +phy_an_fec_30.0=1 +phy_an_fec_31.0=1 +phy_an_fec_32.0=1 +phy_an_fec_34.0=1 +phy_an_fec_38.0=1 +phy_an_fec_39.0=1 +phy_an_fec_40.0=1 +phy_an_fec_41.0=1 +phy_an_fec_42.0=1 +phy_an_fec_43.0=1 +phy_an_fec_44.0=1 +phy_an_fec_45.0=1 +phy_an_fec_46.0=1 +phy_an_fec_47.0=1 +phy_an_fec_48.0=1 +phy_an_fec_49.0=1 +phy_an_fec_50.0=1 +phy_an_fec_51.0=1 +phy_an_fec_52.0=1 +phy_an_fec_53.0=1 +phy_an_fec_54.0=1 +phy_an_fec_55.0=1 +phy_an_fec_56.0=1 +phy_an_fec_57.0=1 +phy_an_fec_58.0=1 +phy_an_fec_59.0=1 +phy_an_fec_60.0=1 +phy_an_fec_61.0=1 +phy_an_fec_62.0=1 +phy_an_fec_63.0=1 +phy_an_fec_64.0=1 +phy_an_fec_65.0=1 +phy_an_fec_68.0=1 +phy_an_fec_69.0=1 +phy_an_fec_70.0=1 +phy_an_fec_71.0=1 +phy_an_fec_72.0=1 +phy_an_fec_73.0=1 +phy_an_fec_74.0=1 +phy_an_fec_75.0=1 +phy_an_fec_76.0=1 +phy_an_fec_77.0=1 +phy_an_fec_78.0=1 +phy_an_fec_79.0=1 +phy_an_fec_80.0=1 +phy_an_fec_81.0=1 +phy_an_fec_82.0=1 +phy_an_fec_83.0=1 +phy_an_fec_84.0=1 +phy_an_fec_85.0=1 +phy_an_fec_86.0=1 +phy_an_fec_87.0=1 +phy_an_fec_88.0=1 +phy_an_fec_89.0=1 +phy_an_fec_90.0=1 +phy_an_fec_91.0=1 +phy_an_fec_92.0=1 +phy_an_fec_93.0=1 +phy_an_fec_94.0=1 +phy_an_fec_95.0=1 +phy_an_fec_96.0=1 +phy_an_fec_97.0=1 +phy_an_fec_98.0=1 +phy_an_fec_99.0=1 +phy_an_fec_102.0=1 +phy_an_fec_103.0=1 +phy_an_fec_104.0=1 +phy_an_fec_105.0=1 +phy_an_fec_106.0=1 +phy_an_fec_107.0=1 +phy_an_fec_108.0=1 +phy_an_fec_109.0=1 +phy_an_fec_110.0=1 +phy_an_fec_111.0=1 +phy_an_fec_112.0=1 +phy_an_fec_113.0=1 +phy_an_fec_114.0=1 +phy_an_fec_115.0=1 +phy_an_fec_116.0=1 +phy_an_fec_117.0=1 +phy_an_fec_118.0=1 +phy_an_fec_119.0=1 +phy_an_fec_120.0=1 +phy_an_fec_121.0=1 +phy_an_fec_122.0=1 +phy_an_fec_123.0=1 +phy_an_fec_124.0=1 +phy_an_fec_125.0=1 +phy_an_fec_126.0=1 +phy_an_fec_127.0=1 +phy_an_fec_128.0=1 +phy_an_fec_129.0=1 +phy_an_fec_130.0=1 +phy_an_fec_131.0=1 +phy_an_fec_132.0=1 +phy_an_fec_133.0=1 +phy_xaui_rx_polarity_flip_1.0=0x1 +phy_xaui_rx_polarity_flip_2.0=0x5 +phy_xaui_rx_polarity_flip_3.0=0x1 +phy_xaui_rx_polarity_flip_4.0=0x7 +phy_xaui_rx_polarity_flip_5.0=0xc +phy_xaui_rx_polarity_flip_6.0=0xf +phy_xaui_rx_polarity_flip_7.0=0xc +phy_xaui_rx_polarity_flip_8.0=0xf +phy_xaui_rx_polarity_flip_34.0=0x0 +phy_xaui_rx_polarity_flip_35.0=0x7 +phy_xaui_rx_polarity_flip_36.0=0x4 +phy_xaui_rx_polarity_flip_37.0=0x7 +phy_xaui_rx_polarity_flip_38.0=0x4 +phy_xaui_rx_polarity_flip_39.0=0x6 +phy_xaui_rx_polarity_flip_40.0=0x1 +phy_xaui_rx_polarity_flip_41.0=0x2 +phy_xaui_rx_polarity_flip_68.0=0xd +phy_xaui_rx_polarity_flip_69.0=0x6 +phy_xaui_rx_polarity_flip_70.0=0x1 +phy_xaui_rx_polarity_flip_71.0=0x8 +phy_xaui_rx_polarity_flip_72.0=0x7 +phy_xaui_rx_polarity_flip_73.0=0xc +phy_xaui_rx_polarity_flip_74.0=0x7 +phy_xaui_rx_polarity_flip_75.0=0x8 +phy_xaui_rx_polarity_flip_102.0=0xb +phy_xaui_rx_polarity_flip_103.0=0xc +phy_xaui_rx_polarity_flip_104.0=0x3 +phy_xaui_rx_polarity_flip_105.0=0xc +phy_xaui_rx_polarity_flip_106.0=0xb +phy_xaui_rx_polarity_flip_107.0=0x5 +phy_xaui_rx_polarity_flip_108.0=0x1 +phy_xaui_rx_polarity_flip_109.0=0x9 +phy_xaui_tx_polarity_flip_1.0=0x0 +phy_xaui_tx_polarity_flip_2.0=0xe +phy_xaui_tx_polarity_flip_3.0=0x2 +phy_xaui_tx_polarity_flip_4.0=0xe +phy_xaui_tx_polarity_flip_5.0=0xc +phy_xaui_tx_polarity_flip_6.0=0xf +phy_xaui_tx_polarity_flip_7.0=0xc +phy_xaui_tx_polarity_flip_8.0=0xf +phy_xaui_tx_polarity_flip_34.0=0x0 +phy_xaui_tx_polarity_flip_35.0=0xe +phy_xaui_tx_polarity_flip_36.0=0x0 +phy_xaui_tx_polarity_flip_37.0=0xe +phy_xaui_tx_polarity_flip_38.0=0xf +phy_xaui_tx_polarity_flip_39.0=0xe +phy_xaui_tx_polarity_flip_40.0=0x6 +phy_xaui_tx_polarity_flip_41.0=0xb +phy_xaui_tx_polarity_flip_68.0=0x9 +phy_xaui_tx_polarity_flip_69.0=0xb +phy_xaui_tx_polarity_flip_70.0=0xd +phy_xaui_tx_polarity_flip_71.0=0x9 +phy_xaui_tx_polarity_flip_72.0=0x6 +phy_xaui_tx_polarity_flip_73.0=0xc +phy_xaui_tx_polarity_flip_74.0=0x9 +phy_xaui_tx_polarity_flip_75.0=0x9 +phy_xaui_tx_polarity_flip_102.0=0x6 +phy_xaui_tx_polarity_flip_103.0=0xb +phy_xaui_tx_polarity_flip_104.0=0x6 +phy_xaui_tx_polarity_flip_105.0=0xb +phy_xaui_tx_polarity_flip_106.0=0x6 +phy_xaui_tx_polarity_flip_107.0=0xf +phy_xaui_tx_polarity_flip_108.0=0x6 +phy_xaui_tx_polarity_flip_109.0=0xc +portmap_1.0=1:100 +portmap_2.0=5:100 +portmap_3.0=9:100 +portmap_4.0=13:100 +portmap_5.0=17:100 +portmap_6.0=21:100 +portmap_7.0=25:100 +portmap_8.0=29:100 +portmap_34.0=33:100 +portmap_35.0=37:100 +portmap_36.0=41:100 +portmap_37.0=45:100 +portmap_38.0=49:100 +portmap_39.0=53:100 +portmap_40.0=57:100 +portmap_41.0=61:100 +portmap_68.0=65:100 +portmap_69.0=69:100 +portmap_70.0=73:100 +portmap_71.0=77:100 +portmap_72.0=81:100 +portmap_73.0=85:100 +portmap_74.0=89:100 +portmap_75.0=93:100 +portmap_102.0=97:100 +portmap_103.0=101:100 +portmap_104.0=105:100 +portmap_105.0=109:100 +portmap_106.0=113:100 +portmap_107.0=117:100 +portmap_108.0=121:100 +portmap_109.0=125:100 +port_phy_addr_1.0=0xff +port_phy_addr_2.0=0xff +port_phy_addr_3.0=0xff +port_phy_addr_4.0=0xff +port_phy_addr_5.0=0xff +port_phy_addr_6.0=0xff +port_phy_addr_7.0=0xff +port_phy_addr_8.0=0xff +port_phy_addr_34.0=0xff +port_phy_addr_35.0=0xff +port_phy_addr_36.0=0xff +port_phy_addr_37.0=0xff +port_phy_addr_38.0=0xff +port_phy_addr_39.0=0xff +port_phy_addr_40.0=0xff +port_phy_addr_41.0=0xff +port_phy_addr_68.0=0xff +port_phy_addr_69.0=0xff +port_phy_addr_70.0=0xff +port_phy_addr_71.0=0xff +port_phy_addr_72.0=0xff +port_phy_addr_73.0=0xff +port_phy_addr_74.0=0xff +port_phy_addr_75.0=0xff +port_phy_addr_102.0=0xff +port_phy_addr_103.0=0xff +port_phy_addr_104.0=0xff +port_phy_addr_105.0=0xff +port_phy_addr_106.0=0xff +port_phy_addr_107.0=0xff +port_phy_addr_108.0=0xff +port_phy_addr_109.0=0xff +xgxs_rx_lane_map_1.0=0x3210 +xgxs_rx_lane_map_2.0=0x3210 +xgxs_rx_lane_map_3.0=0x3210 +xgxs_rx_lane_map_4.0=0x3210 +xgxs_rx_lane_map_5.0=0x0123 +xgxs_rx_lane_map_6.0=0x2301 +xgxs_rx_lane_map_7.0=0x0123 +xgxs_rx_lane_map_8.0=0x2301 +xgxs_rx_lane_map_34.0=0x0123 +xgxs_rx_lane_map_35.0=0x0321 +xgxs_rx_lane_map_36.0=0x0321 +xgxs_rx_lane_map_37.0=0x0321 +xgxs_rx_lane_map_38.0=0x1230 +xgxs_rx_lane_map_39.0=0x2301 +xgxs_rx_lane_map_40.0=0x1230 +xgxs_rx_lane_map_41.0=0x2103 +xgxs_rx_lane_map_68.0=0x1230 +xgxs_rx_lane_map_69.0=0x2301 +xgxs_rx_lane_map_70.0=0x1230 +xgxs_rx_lane_map_71.0=0x2103 +xgxs_rx_lane_map_72.0=0x1230 +xgxs_rx_lane_map_73.0=0x2301 +xgxs_rx_lane_map_74.0=0x1230 +xgxs_rx_lane_map_75.0=0x2103 +xgxs_rx_lane_map_102.0=0x3210 +xgxs_rx_lane_map_103.0=0x3210 +xgxs_rx_lane_map_104.0=0x3210 +xgxs_rx_lane_map_105.0=0x3210 +xgxs_rx_lane_map_106.0=0x3210 +xgxs_rx_lane_map_107.0=0x3210 +xgxs_rx_lane_map_108.0=0x3210 +xgxs_rx_lane_map_109.0=0x3210 +xgxs_tx_lane_map_1.0=0x0321 +xgxs_tx_lane_map_2.0=0x2301 +xgxs_tx_lane_map_3.0=0x0321 +xgxs_tx_lane_map_4.0=0x2301 +xgxs_tx_lane_map_5.0=0x0123 +xgxs_tx_lane_map_6.0=0x0123 +xgxs_tx_lane_map_7.0=0x0123 +xgxs_tx_lane_map_8.0=0x0123 +xgxs_tx_lane_map_34.0=0x2301 +xgxs_tx_lane_map_35.0=0x0321 +xgxs_tx_lane_map_36.0=0x2301 +xgxs_tx_lane_map_37.0=0x0321 +xgxs_tx_lane_map_38.0=0x0123 +xgxs_tx_lane_map_39.0=0x1230 +xgxs_tx_lane_map_40.0=0x2301 +xgxs_tx_lane_map_41.0=0x1032 +xgxs_tx_lane_map_68.0=0x0123 +xgxs_tx_lane_map_69.0=0x1230 +xgxs_tx_lane_map_70.0=0x2301 +xgxs_tx_lane_map_71.0=0x1032 +xgxs_tx_lane_map_72.0=0x0123 +xgxs_tx_lane_map_73.0=0x1230 +xgxs_tx_lane_map_74.0=0x2301 +xgxs_tx_lane_map_75.0=0x1032 +xgxs_tx_lane_map_102.0=0x0321 +xgxs_tx_lane_map_103.0=0x2301 +xgxs_tx_lane_map_104.0=0x0321 +xgxs_tx_lane_map_105.0=0x2301 +xgxs_tx_lane_map_106.0=0x0321 +xgxs_tx_lane_map_107.0=0x2301 +xgxs_tx_lane_map_108.0=0x0321 +xgxs_tx_lane_map_109.0=0x2301 + +# tuning parameters for 25g serdes fiber +serdes_driver_current_1=0xa +serdes_preemphasis_1=0x284008 +serdes_driver_current_2=0xa +serdes_preemphasis_2=0x284008 +serdes_driver_current_3=0xa +serdes_preemphasis_3=0x284008 +serdes_driver_current_4=0xa +serdes_preemphasis_4=0x284008 +serdes_driver_current_5=0xa +serdes_preemphasis_5=0x284008 +serdes_driver_current_6=0xa +serdes_preemphasis_6=0x284008 +serdes_driver_current_7=0xa +serdes_preemphasis_7=0x284008 +serdes_driver_current_8=0xd +serdes_preemphasis_8=0x303808 +serdes_driver_current_34=0xd +serdes_preemphasis_34=0x303808 +serdes_driver_current_35=0xd +serdes_preemphasis_35=0x303808 +serdes_driver_current_36=0xd +serdes_preemphasis_36=0x303808 +serdes_driver_current_37=0xd +serdes_preemphasis_37=0x303808 +serdes_driver_current_38=0xf +serdes_preemphasis_38=0x373108 +serdes_driver_current_39=0xf +serdes_preemphasis_39=0x373108 +serdes_driver_current_40=0xf +serdes_preemphasis_40=0x373108 +serdes_driver_current_41=0xf +serdes_preemphasis_41=0x373108 +serdes_driver_current_68=0xf +serdes_preemphasis_68=0x373108 +serdes_driver_current_69=0xf +serdes_preemphasis_69=0x373108 +serdes_driver_current_70=0xf +serdes_preemphasis_70=0x373108 +serdes_driver_current_71=0xf +serdes_preemphasis_71=0x373108 +serdes_driver_current_72=0xd +serdes_preemphasis_72=0x303808 +serdes_driver_current_73=0xd +serdes_preemphasis_73=0x303808 +serdes_driver_current_74=0xd +serdes_preemphasis_74=0x303808 +serdes_driver_current_75=0xd +serdes_preemphasis_75=0x303808 +serdes_driver_current_102=0xa +serdes_preemphasis_102=0x284008 +serdes_driver_current_103=0xa +serdes_preemphasis_103=0x284008 +serdes_driver_current_104=0xa +serdes_preemphasis_104=0x284008 +serdes_driver_current_105=0xa +serdes_preemphasis_105=0x284008 +serdes_driver_current_106=0xa +serdes_preemphasis_106=0x284008 +serdes_driver_current_107=0xa +serdes_preemphasis_107=0x284008 +serdes_driver_current_108=0xa +serdes_preemphasis_108=0x284008 +serdes_driver_current_109=0xa +serdes_preemphasis_109=0x284008 + +mmu_init_config="MSFT-TH-Tier1" diff --git a/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/sai.profile b/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/sai.profile index 0c3ab159868b..87b4ffdadd6d 100644 --- a/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/sai.profile +++ b/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-a7060-cx32s-8x100G+48x50G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-a7060-cx32s-8x100G+48x50G.config.bcm diff --git a/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/th-a7060-cx32s-8x100G+48x50G.config.bcm b/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/th-a7060-cx32s-8x100G+48x50G.config.bcm new file mode 100644 index 000000000000..326a51ada84f --- /dev/null +++ b/device/arista/x86_64-arista_7060_cx32s/Arista-7060CX-32S-D48C8/th-a7060-cx32s-8x100G+48x50G.config.bcm @@ -0,0 +1,547 @@ +# Arista 7060CX-32S + +phy_an_allow_pll_change=1 +arl_clean_timeout_usec=15000000 +asf_mem_profile=2 +bcm_num_cos=8 +bcm_stat_flags=1 +bcm_stat_jumbo=9236 +cdma_timeout_usec=15000000 +dma_desc_timeout_usec=15000000 +higig2_hdr_mode=1 +ipv6_lpm_128b_enable=1 +l3_alpm_enable=2 +lpm_scaling_enable=0 +l2xmsg_mode=1 +max_vp_lags=0 +miim_intr_enable=0 +module_64ports=1 +os=unix +oversubscribe_mode=1 +ptp_bs_fref.0=25000000 +ptp_ts_pll_fref.0=25000000 +robust_hash_disable_egress_vlan.0=1 +robust_hash_disable_mpls.0=1 +robust_hash_disable_vlan.0=1 +tdma_timeout_usec.0=15000000 +tslam_timeout_usec.0=15000000 +pbmp_xport_xe=0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe +phy_an_allow_pll_change_hg.0=0 +dport_map_direct=1 +phy_an_c73=1 + +phy_an_fec_1.0=1 +phy_an_fec_2.0=1 +phy_an_fec_3.0=1 +phy_an_fec_4.0=1 +phy_an_fec_5.0=1 +phy_an_fec_6.0=1 +phy_an_fec_7.0=1 +phy_an_fec_8.0=1 +phy_an_fec_9.0=1 +phy_an_fec_10.0=1 +phy_an_fec_11.0=1 +phy_an_fec_12.0=1 +phy_an_fec_13.0=1 +phy_an_fec_14.0=1 +phy_an_fec_34.0=1 +phy_an_fec_35.0=1 +phy_an_fec_36.0=1 +phy_an_fec_37.0=1 +phy_an_fec_38.0=1 +phy_an_fec_39.0=1 +phy_an_fec_40.0=1 +phy_an_fec_41.0=1 +phy_an_fec_42.0=1 +phy_an_fec_43.0=1 +phy_an_fec_44.0=1 +phy_an_fec_45.0=1 +phy_an_fec_46.0=1 +phy_an_fec_47.0=1 +phy_an_fec_68.0=1 +phy_an_fec_69.0=1 +phy_an_fec_70.0=1 +phy_an_fec_71.0=1 +phy_an_fec_72.0=1 +phy_an_fec_73.0=1 +phy_an_fec_74.0=1 +phy_an_fec_75.0=1 +phy_an_fec_76.0=1 +phy_an_fec_77.0=1 +phy_an_fec_78.0=1 +phy_an_fec_79.0=1 +phy_an_fec_80.0=1 +phy_an_fec_81.0=1 +phy_an_fec_102.0=1 +phy_an_fec_103.0=1 +phy_an_fec_104.0=1 +phy_an_fec_105.0=1 +phy_an_fec_106.0=1 +phy_an_fec_107.0=1 +phy_an_fec_108.0=1 +phy_an_fec_109.0=1 +phy_an_fec_110.0=1 +phy_an_fec_111.0=1 +phy_an_fec_112.0=1 +phy_an_fec_113.0=1 +phy_an_fec_114.0=1 +phy_an_fec_115.0=1 + +# Q1 +portmap_1.0=1:100 +portmap_2.0=5:100 +portmap_3.0=9:50:2 +portmap_4.0=11:50:2 +portmap_5.0=13:50:2 +portmap_6.0=15:50:2 +portmap_7.0=17:50:2 +portmap_8.0=19:50:2 +portmap_9.0=21:50:2 +portmap_10.0=23:50:2 +portmap_11.0=25:50:2 +portmap_12.0=27:50:2 +portmap_13.0=29:50:2 +portmap_14.0=31:50:2 +phy_xaui_rx_polarity_flip_1.0=0x1 +phy_xaui_rx_polarity_flip_2.0=0x5 +phy_xaui_rx_polarity_flip_3.0=0x1 +phy_xaui_rx_polarity_flip_4.0=0x0 +phy_xaui_rx_polarity_flip_5.0=0x3 +phy_xaui_rx_polarity_flip_6.0=0x1 +phy_xaui_rx_polarity_flip_7.0=0x0 +phy_xaui_rx_polarity_flip_8.0=0x3 +phy_xaui_rx_polarity_flip_9.0=0x3 +phy_xaui_rx_polarity_flip_10.0=0x3 +phy_xaui_rx_polarity_flip_11.0=0x0 +phy_xaui_rx_polarity_flip_12.0=0x3 +phy_xaui_rx_polarity_flip_13.0=0x3 +phy_xaui_rx_polarity_flip_14.0=0x3 +phy_xaui_tx_polarity_flip_1.0=0x0 +phy_xaui_tx_polarity_flip_2.0=0xe +phy_xaui_tx_polarity_flip_3.0=0x2 +phy_xaui_tx_polarity_flip_4.0=0x0 +phy_xaui_tx_polarity_flip_5.0=0x2 +phy_xaui_tx_polarity_flip_6.0=0x3 +phy_xaui_tx_polarity_flip_7.0=0x0 +phy_xaui_tx_polarity_flip_8.0=0x3 +phy_xaui_tx_polarity_flip_9.0=0x3 +phy_xaui_tx_polarity_flip_10.0=0x3 +phy_xaui_tx_polarity_flip_11.0=0x0 +phy_xaui_tx_polarity_flip_12.0=0x3 +phy_xaui_tx_polarity_flip_13.0=0x3 +phy_xaui_tx_polarity_flip_14.0=0x3 +port_phy_addr_1.0=0xff +port_phy_addr_2.0=0xff +port_phy_addr_3.0=0xff +port_phy_addr_4.0=0xff +port_phy_addr_5.0=0xff +port_phy_addr_6.0=0xff +port_phy_addr_7.0=0xff +port_phy_addr_8.0=0xff +port_phy_addr_9.0=0xff +port_phy_addr_10.0=0xff +port_phy_addr_11.0=0xff +port_phy_addr_12.0=0xff +port_phy_addr_13.0=0xff +port_phy_addr_14.0=0xff +xgxs_rx_lane_map_1.0=0x3210 +xgxs_rx_lane_map_2.0=0x3210 +xgxs_rx_lane_map_3.0=0x3210 +xgxs_rx_lane_map_4.0=0x3210 +xgxs_rx_lane_map_5.0=0x3210 +xgxs_rx_lane_map_6.0=0x3210 +xgxs_rx_lane_map_7.0=0x0123 +xgxs_rx_lane_map_8.0=0x0123 +xgxs_rx_lane_map_9.0=0x2301 +xgxs_rx_lane_map_10.0=0x2301 +xgxs_rx_lane_map_11.0=0x0123 +xgxs_rx_lane_map_12.0=0x0123 +xgxs_rx_lane_map_13.0=0x2301 +xgxs_rx_lane_map_14.0=0x2301 +xgxs_tx_lane_map_1.0=0x0321 +xgxs_tx_lane_map_2.0=0x2301 +xgxs_tx_lane_map_3.0=0x0321 +xgxs_tx_lane_map_4.0=0x0321 +xgxs_tx_lane_map_5.0=0x2301 +xgxs_tx_lane_map_6.0=0x2301 +xgxs_tx_lane_map_7.0=0x0123 +xgxs_tx_lane_map_8.0=0x0123 +xgxs_tx_lane_map_9.0=0x0123 +xgxs_tx_lane_map_10.0=0x0123 +xgxs_tx_lane_map_11.0=0x0123 +xgxs_tx_lane_map_12.0=0x0123 +xgxs_tx_lane_map_13.0=0x0123 +xgxs_tx_lane_map_14.0=0x0123 + +# Q2 +portmap_34.0=33:50:2 +portmap_35.0=35:50:2 +portmap_36.0=37:50:2 +portmap_37.0=39:50:2 +portmap_38.0=41:50:2 +portmap_39.0=43:50:2 +portmap_40.0=45:50:2 +portmap_41.0=47:50:2 +portmap_42.0=49:50:2 +portmap_43.0=51:50:2 +portmap_44.0=53:50:2 +portmap_45.0=55:50:2 +portmap_46.0=57:100 +portmap_47.0=61:100 +phy_xaui_rx_polarity_flip_34.0=0x0 +phy_xaui_rx_polarity_flip_35.0=0x0 +phy_xaui_rx_polarity_flip_36.0=0x3 +phy_xaui_rx_polarity_flip_37.0=0x1 +phy_xaui_rx_polarity_flip_38.0=0x0 +phy_xaui_rx_polarity_flip_39.0=0x1 +phy_xaui_rx_polarity_flip_40.0=0x3 +phy_xaui_rx_polarity_flip_41.0=0x1 +phy_xaui_rx_polarity_flip_42.0=0x0 +phy_xaui_rx_polarity_flip_43.0=0x1 +phy_xaui_rx_polarity_flip_44.0=0x2 +phy_xaui_rx_polarity_flip_45.0=0x1 +phy_xaui_rx_polarity_flip_46.0=0x1 +phy_xaui_rx_polarity_flip_47.0=0x2 +phy_xaui_tx_polarity_flip_34.0=0x0 +phy_xaui_tx_polarity_flip_35.0=0x0 +phy_xaui_tx_polarity_flip_36.0=0x2 +phy_xaui_tx_polarity_flip_37.0=0x3 +phy_xaui_tx_polarity_flip_38.0=0x0 +phy_xaui_tx_polarity_flip_39.0=0x0 +phy_xaui_tx_polarity_flip_40.0=0x2 +phy_xaui_tx_polarity_flip_41.0=0x3 +phy_xaui_tx_polarity_flip_42.0=0x3 +phy_xaui_tx_polarity_flip_43.0=0x3 +phy_xaui_tx_polarity_flip_44.0=0x2 +phy_xaui_tx_polarity_flip_45.0=0x3 +phy_xaui_tx_polarity_flip_46.0=0x6 +phy_xaui_tx_polarity_flip_47.0=0xb +port_phy_addr_34.0=0xff +port_phy_addr_35.0=0xff +port_phy_addr_36.0=0xff +port_phy_addr_37.0=0xff +port_phy_addr_38.0=0xff +port_phy_addr_39.0=0xff +port_phy_addr_40.0=0xff +port_phy_addr_41.0=0xff +port_phy_addr_42.0=0xff +port_phy_addr_43.0=0xff +port_phy_addr_44.0=0xff +port_phy_addr_45.0=0xff +port_phy_addr_46.0=0xff +port_phy_addr_47.0=0xff +xgxs_rx_lane_map_34.0=0x0123 +xgxs_rx_lane_map_35.0=0x0123 +xgxs_rx_lane_map_36.0=0x0321 +xgxs_rx_lane_map_37.0=0x0321 +xgxs_rx_lane_map_38.0=0x0321 +xgxs_rx_lane_map_39.0=0x0321 +xgxs_rx_lane_map_40.0=0x0321 +xgxs_rx_lane_map_41.0=0x0321 +xgxs_rx_lane_map_42.0=0x1230 +xgxs_rx_lane_map_43.0=0x1230 +xgxs_rx_lane_map_44.0=0x2301 +xgxs_rx_lane_map_45.0=0x2301 +xgxs_rx_lane_map_46.0=0x1230 +xgxs_rx_lane_map_47.0=0x2103 +xgxs_tx_lane_map_34.0=0x2301 +xgxs_tx_lane_map_35.0=0x2301 +xgxs_tx_lane_map_36.0=0x0321 +xgxs_tx_lane_map_37.0=0x0321 +xgxs_tx_lane_map_38.0=0x2301 +xgxs_tx_lane_map_39.0=0x2301 +xgxs_tx_lane_map_40.0=0x0321 +xgxs_tx_lane_map_41.0=0x0321 +xgxs_tx_lane_map_42.0=0x0123 +xgxs_tx_lane_map_43.0=0x0123 +xgxs_tx_lane_map_44.0=0x1230 +xgxs_tx_lane_map_45.0=0x1230 +xgxs_tx_lane_map_46.0=0x2301 +xgxs_tx_lane_map_47.0=0x1032 + +# Q3 +portmap_68.0=65:100 +portmap_69.0=69:100 +portmap_70.0=73:50:2 +portmap_71.0=75:50:2 +portmap_72.0=77:50:2 +portmap_73.0=79:50:2 +portmap_74.0=81:50:2 +portmap_75.0=83:50:2 +portmap_76.0=85:50:2 +portmap_77.0=87:50:2 +portmap_78.0=89:50:2 +portmap_79.0=91:50:2 +portmap_80.0=93:50:2 +portmap_81.0=95:50:2 +phy_xaui_rx_polarity_flip_68.0=0xd +phy_xaui_rx_polarity_flip_69.0=0x6 +phy_xaui_rx_polarity_flip_70.0=0x1 +phy_xaui_rx_polarity_flip_71.0=0x0 +phy_xaui_rx_polarity_flip_72.0=0x0 +phy_xaui_rx_polarity_flip_73.0=0x2 +phy_xaui_rx_polarity_flip_74.0=0x3 +phy_xaui_rx_polarity_flip_75.0=0x1 +phy_xaui_rx_polarity_flip_76.0=0x0 +phy_xaui_rx_polarity_flip_77.0=0x3 +phy_xaui_rx_polarity_flip_78.0=0x3 +phy_xaui_rx_polarity_flip_79.0=0x1 +phy_xaui_rx_polarity_flip_80.0=0x0 +phy_xaui_rx_polarity_flip_81.0=0x2 +phy_xaui_tx_polarity_flip_68.0=0x9 +phy_xaui_tx_polarity_flip_69.0=0xb +phy_xaui_tx_polarity_flip_70.0=0x1 +phy_xaui_tx_polarity_flip_71.0=0x3 +phy_xaui_tx_polarity_flip_72.0=0x1 +phy_xaui_tx_polarity_flip_73.0=0x2 +phy_xaui_tx_polarity_flip_74.0=0x2 +phy_xaui_tx_polarity_flip_75.0=0x1 +phy_xaui_tx_polarity_flip_76.0=0x0 +phy_xaui_tx_polarity_flip_77.0=0x3 +phy_xaui_tx_polarity_flip_78.0=0x1 +phy_xaui_tx_polarity_flip_79.0=0x2 +phy_xaui_tx_polarity_flip_80.0=0x1 +phy_xaui_tx_polarity_flip_81.0=0x2 +port_phy_addr_68.0=0xff +port_phy_addr_69.0=0xff +port_phy_addr_70.0=0xff +port_phy_addr_71.0=0xff +port_phy_addr_72.0=0xff +port_phy_addr_73.0=0xff +port_phy_addr_74.0=0xff +port_phy_addr_75.0=0xff +port_phy_addr_76.0=0xff +port_phy_addr_77.0=0xff +port_phy_addr_78.0=0xff +port_phy_addr_79.0=0xff +port_phy_addr_80.0=0xff +port_phy_addr_81.0=0xff +xgxs_rx_lane_map_68.0=0x1230 +xgxs_rx_lane_map_69.0=0x2301 +xgxs_rx_lane_map_70.0=0x1230 +xgxs_rx_lane_map_71.0=0x1230 +xgxs_rx_lane_map_72.0=0x2103 +xgxs_rx_lane_map_73.0=0x2103 +xgxs_rx_lane_map_74.0=0x1230 +xgxs_rx_lane_map_75.0=0x1230 +xgxs_rx_lane_map_76.0=0x2301 +xgxs_rx_lane_map_77.0=0x2301 +xgxs_rx_lane_map_78.0=0x1230 +xgxs_rx_lane_map_79.0=0x1230 +xgxs_rx_lane_map_80.0=0x2103 +xgxs_rx_lane_map_81.0=0x2103 +xgxs_tx_lane_map_68.0=0x0123 +xgxs_tx_lane_map_69.0=0x1230 +xgxs_tx_lane_map_70.0=0x2301 +xgxs_tx_lane_map_71.0=0x2301 +xgxs_tx_lane_map_72.0=0x1032 +xgxs_tx_lane_map_73.0=0x1032 +xgxs_tx_lane_map_74.0=0x0123 +xgxs_tx_lane_map_75.0=0x0123 +xgxs_tx_lane_map_76.0=0x1230 +xgxs_tx_lane_map_77.0=0x1230 +xgxs_tx_lane_map_78.0=0x2301 +xgxs_tx_lane_map_79.0=0x2301 +xgxs_tx_lane_map_80.0=0x1032 +xgxs_tx_lane_map_81.0=0x1032 + +# Q4 +portmap_102.0=97:50:2 +portmap_103.0=99:50:2 +portmap_104.0=101:50:2 +portmap_105.0=103:50:2 +portmap_106.0=105:50:2 +portmap_107.0=107:50:2 +portmap_108.0=109:50:2 +portmap_109.0=111:50:2 +portmap_110.0=113:50:2 +portmap_111.0=115:50:2 +portmap_112.0=117:50:2 +portmap_113.0=119:50:2 +portmap_114.0=121:100 +portmap_115.0=125:100 +phy_xaui_rx_polarity_flip_102.0=0x3 +phy_xaui_rx_polarity_flip_103.0=0x2 +phy_xaui_rx_polarity_flip_104.0=0x0 +phy_xaui_rx_polarity_flip_105.0=0x3 +phy_xaui_rx_polarity_flip_106.0=0x3 +phy_xaui_rx_polarity_flip_107.0=0x0 +phy_xaui_rx_polarity_flip_108.0=0x0 +phy_xaui_rx_polarity_flip_109.0=0x3 +phy_xaui_rx_polarity_flip_110.0=0x3 +phy_xaui_rx_polarity_flip_111.0=0x2 +phy_xaui_rx_polarity_flip_112.0=0x1 +phy_xaui_rx_polarity_flip_113.0=0x1 +phy_xaui_rx_polarity_flip_114.0=0x1 +phy_xaui_rx_polarity_flip_115.0=0x9 +phy_xaui_tx_polarity_flip_102.0=0x2 +phy_xaui_tx_polarity_flip_103.0=0x1 +phy_xaui_tx_polarity_flip_104.0=0x3 +phy_xaui_tx_polarity_flip_105.0=0x2 +phy_xaui_tx_polarity_flip_106.0=0x2 +phy_xaui_tx_polarity_flip_107.0=0x1 +phy_xaui_tx_polarity_flip_108.0=0x3 +phy_xaui_tx_polarity_flip_109.0=0x2 +phy_xaui_tx_polarity_flip_110.0=0x2 +phy_xaui_tx_polarity_flip_111.0=0x1 +phy_xaui_tx_polarity_flip_112.0=0x3 +phy_xaui_tx_polarity_flip_113.0=0x3 +phy_xaui_tx_polarity_flip_114.0=0x6 +phy_xaui_tx_polarity_flip_115.0=0xc +port_phy_addr_102.0=0xff +port_phy_addr_103.0=0xff +port_phy_addr_104.0=0xff +port_phy_addr_105.0=0xff +port_phy_addr_106.0=0xff +port_phy_addr_107.0=0xff +port_phy_addr_108.0=0xff +port_phy_addr_109.0=0xff +port_phy_addr_110.0=0xff +port_phy_addr_111.0=0xff +port_phy_addr_112.0=0xff +port_phy_addr_113.0=0xff +port_phy_addr_114.0=0xff +port_phy_addr_115.0=0xff +xgxs_rx_lane_map_102.0=0x3210 +xgxs_rx_lane_map_103.0=0x3210 +xgxs_rx_lane_map_104.0=0x3210 +xgxs_rx_lane_map_105.0=0x3210 +xgxs_rx_lane_map_106.0=0x3210 +xgxs_rx_lane_map_107.0=0x3210 +xgxs_rx_lane_map_108.0=0x3210 +xgxs_rx_lane_map_109.0=0x3210 +xgxs_rx_lane_map_110.0=0x3210 +xgxs_rx_lane_map_111.0=0x3210 +xgxs_rx_lane_map_112.0=0x3210 +xgxs_rx_lane_map_114.0=0x3210 +xgxs_rx_lane_map_115.0=0x3210 +xgxs_tx_lane_map_102.0=0x0321 +xgxs_tx_lane_map_103.0=0x0321 +xgxs_tx_lane_map_104.0=0x2301 +xgxs_tx_lane_map_105.0=0x2301 +xgxs_tx_lane_map_106.0=0x0321 +xgxs_tx_lane_map_107.0=0x0321 +xgxs_tx_lane_map_108.0=0x2301 +xgxs_tx_lane_map_109.0=0x2301 +xgxs_tx_lane_map_110.0=0x0321 +xgxs_tx_lane_map_111.0=0x0321 +xgxs_tx_lane_map_112.0=0x2301 +xgxs_tx_lane_map_113.0=0x2301 +xgxs_tx_lane_map_114.0=0x0321 +xgxs_tx_lane_map_115.0=0x2301 + +# tuning parameters +serdes_driver_current_1=0xa +serdes_preemphasis_1=0x284008 +serdes_driver_current_2=0xa +serdes_preemphasis_2=0x284008 +serdes_driver_current_3=0xf +serdes_preemphasis_3=0x46408 +serdes_driver_current_4=0xf +serdes_preemphasis_4=0x46408 +serdes_driver_current_5=0xf +serdes_preemphasis_5=0x46408 +serdes_driver_current_6=0xf +serdes_preemphasis_6=0x46408 +serdes_driver_current_7=0xf +serdes_preemphasis_7=0x46408 +serdes_driver_current_8=0xf +serdes_preemphasis_8=0x46408 +serdes_driver_current_9=0xf +serdes_preemphasis_9=0x46408 +serdes_driver_current_10=0xf +serdes_preemphasis_10=0x46408 +serdes_driver_current_11=0xf +serdes_preemphasis_11=0x46408 +serdes_driver_current_12=0xf +serdes_preemphasis_12=0x46408 +serdes_driver_current_13=0xf +serdes_preemphasis_13=0x46408 +serdes_driver_current_14=0xf +serdes_preemphasis_14=0x46408 +serdes_driver_current_34=0xf +serdes_preemphasis_34=0x46408 +serdes_driver_current_35=0xf +serdes_preemphasis_35=0x46408 +serdes_driver_current_36=0xf +serdes_preemphasis_36=0x46408 +serdes_driver_current_37=0xf +serdes_preemphasis_37=0x46408 +serdes_driver_current_38=0xf +serdes_preemphasis_38=0x46408 +serdes_driver_current_39=0xf +serdes_preemphasis_39=0x46408 +serdes_driver_current_40=0xf +serdes_preemphasis_40=0x46408 +serdes_driver_current_41=0xf +serdes_preemphasis_41=0x46408 +serdes_driver_current_42=0xf +serdes_preemphasis_42=0x46408 +serdes_driver_current_43=0xf +serdes_preemphasis_43=0x46408 +serdes_driver_current_44=0xf +serdes_preemphasis_44=0x46408 +serdes_driver_current_45=0xf +serdes_preemphasis_45=0x46408 +serdes_driver_current_46=0xf +serdes_preemphasis_46=0x373108 +serdes_driver_current_47=0xf +serdes_preemphasis_47=0x373108 +serdes_driver_current_68=0xf +serdes_preemphasis_68=0x373108 +serdes_driver_current_69=0xf +serdes_preemphasis_69=0x373108 +serdes_driver_current_70=0xf +serdes_preemphasis_70=0x46408 +serdes_driver_current_71=0xf +serdes_preemphasis_71=0x46408 +serdes_driver_current_72=0xf +serdes_preemphasis_72=0x46408 +serdes_driver_current_73=0xf +serdes_preemphasis_73=0x46408 +serdes_driver_current_74=0xf +serdes_preemphasis_74=0x46408 +serdes_driver_current_75=0xf +serdes_preemphasis_75=0x46408 +serdes_driver_current_76=0xf +serdes_preemphasis_76=0x46408 +serdes_driver_current_77=0xf +serdes_preemphasis_77=0x46408 +serdes_driver_current_78=0xf +serdes_preemphasis_78=0x46408 +serdes_driver_current_79=0xf +serdes_preemphasis_79=0x46408 +serdes_driver_current_80=0xf +serdes_preemphasis_80=0x46408 +serdes_driver_current_81=0xf +serdes_preemphasis_81=0x46408 +serdes_driver_current_102=0xf +serdes_preemphasis_102=0x46408 +serdes_driver_current_103=0xf +serdes_preemphasis_103=0x46408 +serdes_driver_current_104=0xf +serdes_preemphasis_104=0x46408 +serdes_driver_current_105=0xf +serdes_preemphasis_105=0x46408 +serdes_driver_current_106=0xf +serdes_preemphasis_106=0x46408 +serdes_driver_current_107=0xf +serdes_preemphasis_107=0x46408 +serdes_driver_current_108=0xf +serdes_preemphasis_108=0x46408 +serdes_driver_current_109=0xf +serdes_preemphasis_109=0x46408 +serdes_driver_current_110=0xf +serdes_preemphasis_110=0x46408 +serdes_driver_current_111=0xf +serdes_preemphasis_111=0x46408 +serdes_driver_current_112=0xf +serdes_preemphasis_112=0x46408 +serdes_driver_current_113=0xf +serdes_preemphasis_113=0x46408 +serdes_driver_current_114=0xa +serdes_preemphasis_114=0x284008 +serdes_driver_current_115=0xa +serdes_preemphasis_115=0x284008 + +mmu_init_config="MSFT-TH-Tier0" diff --git a/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/sai.profile b/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/sai.profile index d6fbf6e9c6b1..74aea949c3b7 100644 --- a/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/sai.profile +++ b/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th2-a7260cx3-64-64x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th2-a7260cx3-64-64x100G.config.bcm diff --git a/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/th2-a7260cx3-64-64x100G.config.bcm b/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/th2-a7260cx3-64-64x100G.config.bcm new file mode 100644 index 000000000000..1197bca761b6 --- /dev/null +++ b/device/arista/x86_64-arista_7260cx3_64/Arista-7260CX3-C64/th2-a7260cx3-64-64x100G.config.bcm @@ -0,0 +1,1016 @@ +PHY_AN_ALLOW_PLL_CHANGE=1 +arl_clean_timeout_usec=15000000 +asf_mem_profile=2 +bcm_num_cos=8 +bcm_stat_flags=1 +bcm_stat_jumbo=9236 +cdma_timeout_usec=15000000 +core_clock_frequency=1700 +dma_desc_timeout_usec=15000000 +dpp_clock_ratio=2:3 +higig2_hdr_mode=1 +ipv6_lpm_128b_enable=1 +l3_alpm_enable=2 +lpm_scaling_enable=0 +l2xmsg_mode=1 +max_vp_lags=0 +mem_scan_enable=1 +miim_intr_enable=0 +module_64ports=1 +os=unix +oversubscribe_mode=1 +pbmp_xport_xe=0x40003ffff0000ffffc0003fffe0001fffe +phy_an_allow_pll_change_hg=0 +phy_an_c73_100=1 +phy_an_c73_102=1 +phy_an_c73_103=1 +phy_an_c73_104=1 +phy_an_c73_105=1 +phy_an_c73_106=1 +phy_an_c73_107=1 +phy_an_c73_108=1 +phy_an_c73_109=1 +phy_an_c73_10=1 +phy_an_c73_110=1 +phy_an_c73_111=1 +phy_an_c73_112=1 +phy_an_c73_113=1 +phy_an_c73_114=1 +phy_an_c73_115=1 +phy_an_c73_116=1 +phy_an_c73_117=1 +phy_an_c73_11=1 +phy_an_c73_12=1 +phy_an_c73_13=1 +phy_an_c73_14=1 +phy_an_c73_15=1 +phy_an_c73_16=1 +phy_an_c73_1=1 +phy_an_c73_2=1 +phy_an_c73_34=1 +phy_an_c73_35=1 +phy_an_c73_36=1 +phy_an_c73_37=1 +phy_an_c73_38=1 +phy_an_c73_39=1 +phy_an_c73_3=1 +phy_an_c73_40=1 +phy_an_c73_41=1 +phy_an_c73_42=1 +phy_an_c73_43=1 +phy_an_c73_44=1 +phy_an_c73_45=1 +phy_an_c73_46=1 +phy_an_c73_47=1 +phy_an_c73_48=1 +phy_an_c73_49=1 +phy_an_c73_4=1 +phy_an_c73_5=1 +phy_an_c73_66=1 +phy_an_c73_68=1 +phy_an_c73_69=1 +phy_an_c73_6=1 +phy_an_c73_70=1 +phy_an_c73_71=1 +phy_an_c73_72=1 +phy_an_c73_73=1 +phy_an_c73_74=1 +phy_an_c73_75=1 +phy_an_c73_76=1 +phy_an_c73_77=1 +phy_an_c73_78=1 +phy_an_c73_79=1 +phy_an_c73_7=1 +phy_an_c73_80=1 +phy_an_c73_81=1 +phy_an_c73_82=1 +phy_an_c73_83=1 +phy_an_c73_8=1 +phy_an_c73_9=1 +phy_chain_rx_lane_map_physical{1.0}=0x3210 +phy_chain_rx_lane_map_physical{101.0}=0x0123 +phy_chain_rx_lane_map_physical{105.0}=0x0123 +phy_chain_rx_lane_map_physical{109.0}=0x0123 +phy_chain_rx_lane_map_physical{113.0}=0x2301 +phy_chain_rx_lane_map_physical{117.0}=0x3210 +phy_chain_rx_lane_map_physical{121.0}=0x3210 +phy_chain_rx_lane_map_physical{125.0}=0x1203 +phy_chain_rx_lane_map_physical{129.0}=0x3210 +phy_chain_rx_lane_map_physical{13.0}=0x0321 +phy_chain_rx_lane_map_physical{133.0}=0x1032 +phy_chain_rx_lane_map_physical{137.0}=0x3210 +phy_chain_rx_lane_map_physical{141.0}=0x0123 +phy_chain_rx_lane_map_physical{145.0}=0x3210 +phy_chain_rx_lane_map_physical{149.0}=0x2310 +phy_chain_rx_lane_map_physical{153.0}=0x0132 +phy_chain_rx_lane_map_physical{157.0}=0x1302 +phy_chain_rx_lane_map_physical{161.0}=0x3021 +phy_chain_rx_lane_map_physical{165.0}=0x2031 +phy_chain_rx_lane_map_physical{169.0}=0x2031 +phy_chain_rx_lane_map_physical{17.0}=0x3210 +phy_chain_rx_lane_map_physical{173.0}=0x1302 +phy_chain_rx_lane_map_physical{177.0}=0x2031 +phy_chain_rx_lane_map_physical{181.0}=0x0213 +phy_chain_rx_lane_map_physical{185.0}=0x0213 +phy_chain_rx_lane_map_physical{189.0}=0x1302 +phy_chain_rx_lane_map_physical{193.0}=0x3120 +phy_chain_rx_lane_map_physical{197.0}=0x0231 +phy_chain_rx_lane_map_physical{201.0}=0x2031 +phy_chain_rx_lane_map_physical{205.0}=0x0213 +phy_chain_rx_lane_map_physical{209.0}=0x2013 +phy_chain_rx_lane_map_physical{21.0}=0x3021 +phy_chain_rx_lane_map_physical{213.0}=0x3021 +phy_chain_rx_lane_map_physical{217.0}=0x0231 +phy_chain_rx_lane_map_physical{221.0}=0x2031 +phy_chain_rx_lane_map_physical{225.0}=0x1203 +phy_chain_rx_lane_map_physical{229.0}=0x1230 +phy_chain_rx_lane_map_physical{233.0}=0x3021 +phy_chain_rx_lane_map_physical{237.0}=0x1032 +phy_chain_rx_lane_map_physical{241.0}=0x2301 +phy_chain_rx_lane_map_physical{245.0}=0x0321 +phy_chain_rx_lane_map_physical{249.0}=0x2301 +phy_chain_rx_lane_map_physical{25.0}=0x2301 +phy_chain_rx_lane_map_physical{253.0}=0x2301 +phy_chain_rx_lane_map_physical{257.0}=0x3210 +phy_chain_rx_lane_map_physical{29.0}=0x3021 +phy_chain_rx_lane_map_physical{33.0}=0x1302 +phy_chain_rx_lane_map_physical{37.0}=0x2031 +phy_chain_rx_lane_map_physical{41.0}=0x3021 +phy_chain_rx_lane_map_physical{45.0}=0x1023 +phy_chain_rx_lane_map_physical{49.0}=0x0213 +phy_chain_rx_lane_map_physical{5.0}=0x3201 +phy_chain_rx_lane_map_physical{53.0}=0x3201 +phy_chain_rx_lane_map_physical{57.0}=0x2013 +phy_chain_rx_lane_map_physical{61.0}=0x0213 +phy_chain_rx_lane_map_physical{65.0}=0x1203 +phy_chain_rx_lane_map_physical{69.0}=0x0213 +phy_chain_rx_lane_map_physical{73.0}=0x0213 +phy_chain_rx_lane_map_physical{77.0}=0x3120 +phy_chain_rx_lane_map_physical{81.0}=0x0213 +phy_chain_rx_lane_map_physical{85.0}=0x2031 +phy_chain_rx_lane_map_physical{89.0}=0x2031 +phy_chain_rx_lane_map_physical{9.0}=0x0321 +phy_chain_rx_lane_map_physical{93.0}=0x3120 +phy_chain_rx_lane_map_physical{97.0}=0x1203 +phy_chain_rx_polarity_flip_physical{1.0}=0x1 +phy_chain_rx_polarity_flip_physical{10.0}=0x0 +phy_chain_rx_polarity_flip_physical{100.0}=0x1 +phy_chain_rx_polarity_flip_physical{101.0}=0x1 +phy_chain_rx_polarity_flip_physical{102.0}=0x0 +phy_chain_rx_polarity_flip_physical{103.0}=0x1 +phy_chain_rx_polarity_flip_physical{104.0}=0x0 +phy_chain_rx_polarity_flip_physical{105.0}=0x1 +phy_chain_rx_polarity_flip_physical{106.0}=0x0 +phy_chain_rx_polarity_flip_physical{107.0}=0x1 +phy_chain_rx_polarity_flip_physical{108.0}=0x0 +phy_chain_rx_polarity_flip_physical{109.0}=0x0 +phy_chain_rx_polarity_flip_physical{11.0}=0x1 +phy_chain_rx_polarity_flip_physical{110.0}=0x1 +phy_chain_rx_polarity_flip_physical{111.0}=0x0 +phy_chain_rx_polarity_flip_physical{112.0}=0x1 +phy_chain_rx_polarity_flip_physical{113.0}=0x1 +phy_chain_rx_polarity_flip_physical{114.0}=0x0 +phy_chain_rx_polarity_flip_physical{115.0}=0x1 +phy_chain_rx_polarity_flip_physical{116.0}=0x0 +phy_chain_rx_polarity_flip_physical{117.0}=0x0 +phy_chain_rx_polarity_flip_physical{118.0}=0x0 +phy_chain_rx_polarity_flip_physical{119.0}=0x1 +phy_chain_rx_polarity_flip_physical{12.0}=0x1 +phy_chain_rx_polarity_flip_physical{120.0}=0x0 +phy_chain_rx_polarity_flip_physical{121.0}=0x1 +phy_chain_rx_polarity_flip_physical{122.0}=0x0 +phy_chain_rx_polarity_flip_physical{123.0}=0x1 +phy_chain_rx_polarity_flip_physical{124.0}=0x0 +phy_chain_rx_polarity_flip_physical{125.0}=0x0 +phy_chain_rx_polarity_flip_physical{126.0}=0x1 +phy_chain_rx_polarity_flip_physical{127.0}=0x1 +phy_chain_rx_polarity_flip_physical{128.0}=0x1 +phy_chain_rx_polarity_flip_physical{129.0}=0x0 +phy_chain_rx_polarity_flip_physical{13.0}=0x1 +phy_chain_rx_polarity_flip_physical{130.0}=0x1 +phy_chain_rx_polarity_flip_physical{131.0}=0x1 +phy_chain_rx_polarity_flip_physical{132.0}=0x0 +phy_chain_rx_polarity_flip_physical{133.0}=0x1 +phy_chain_rx_polarity_flip_physical{134.0}=0x1 +phy_chain_rx_polarity_flip_physical{135.0}=0x1 +phy_chain_rx_polarity_flip_physical{136.0}=0x0 +phy_chain_rx_polarity_flip_physical{137.0}=0x0 +phy_chain_rx_polarity_flip_physical{138.0}=0x0 +phy_chain_rx_polarity_flip_physical{139.0}=0x1 +phy_chain_rx_polarity_flip_physical{14.0}=0x0 +phy_chain_rx_polarity_flip_physical{140.0}=0x0 +phy_chain_rx_polarity_flip_physical{141.0}=0x1 +phy_chain_rx_polarity_flip_physical{142.0}=0x0 +phy_chain_rx_polarity_flip_physical{143.0}=0x1 +phy_chain_rx_polarity_flip_physical{144.0}=0x0 +phy_chain_rx_polarity_flip_physical{145.0}=0x1 +phy_chain_rx_polarity_flip_physical{146.0}=0x0 +phy_chain_rx_polarity_flip_physical{147.0}=0x1 +phy_chain_rx_polarity_flip_physical{148.0}=0x0 +phy_chain_rx_polarity_flip_physical{149.0}=0x0 +phy_chain_rx_polarity_flip_physical{15.0}=0x1 +phy_chain_rx_polarity_flip_physical{150.0}=0x1 +phy_chain_rx_polarity_flip_physical{151.0}=0x1 +phy_chain_rx_polarity_flip_physical{152.0}=0x0 +phy_chain_rx_polarity_flip_physical{153.0}=0x0 +phy_chain_rx_polarity_flip_physical{154.0}=0x1 +phy_chain_rx_polarity_flip_physical{155.0}=0x1 +phy_chain_rx_polarity_flip_physical{156.0}=0x0 +phy_chain_rx_polarity_flip_physical{157.0}=0x0 +phy_chain_rx_polarity_flip_physical{158.0}=0x0 +phy_chain_rx_polarity_flip_physical{159.0}=0x1 +phy_chain_rx_polarity_flip_physical{16.0}=0x0 +phy_chain_rx_polarity_flip_physical{160.0}=0x0 +phy_chain_rx_polarity_flip_physical{161.0}=0x1 +phy_chain_rx_polarity_flip_physical{162.0}=0x1 +phy_chain_rx_polarity_flip_physical{163.0}=0x0 +phy_chain_rx_polarity_flip_physical{164.0}=0x1 +phy_chain_rx_polarity_flip_physical{165.0}=0x0 +phy_chain_rx_polarity_flip_physical{166.0}=0x0 +phy_chain_rx_polarity_flip_physical{167.0}=0x1 +phy_chain_rx_polarity_flip_physical{168.0}=0x1 +phy_chain_rx_polarity_flip_physical{169.0}=0x1 +phy_chain_rx_polarity_flip_physical{17.0}=0x1 +phy_chain_rx_polarity_flip_physical{170.0}=0x1 +phy_chain_rx_polarity_flip_physical{171.0}=0x0 +phy_chain_rx_polarity_flip_physical{172.0}=0x0 +phy_chain_rx_polarity_flip_physical{173.0}=0x0 +phy_chain_rx_polarity_flip_physical{174.0}=0x0 +phy_chain_rx_polarity_flip_physical{175.0}=0x1 +phy_chain_rx_polarity_flip_physical{176.0}=0x1 +phy_chain_rx_polarity_flip_physical{177.0}=0x1 +phy_chain_rx_polarity_flip_physical{178.0}=0x1 +phy_chain_rx_polarity_flip_physical{179.0}=0x0 +phy_chain_rx_polarity_flip_physical{18.0}=0x0 +phy_chain_rx_polarity_flip_physical{180.0}=0x0 +phy_chain_rx_polarity_flip_physical{181.0}=0x1 +phy_chain_rx_polarity_flip_physical{182.0}=0x1 +phy_chain_rx_polarity_flip_physical{183.0}=0x0 +phy_chain_rx_polarity_flip_physical{184.0}=0x0 +phy_chain_rx_polarity_flip_physical{185.0}=0x0 +phy_chain_rx_polarity_flip_physical{186.0}=0x0 +phy_chain_rx_polarity_flip_physical{187.0}=0x1 +phy_chain_rx_polarity_flip_physical{188.0}=0x1 +phy_chain_rx_polarity_flip_physical{189.0}=0x0 +phy_chain_rx_polarity_flip_physical{19.0}=0x1 +phy_chain_rx_polarity_flip_physical{190.0}=0x0 +phy_chain_rx_polarity_flip_physical{191.0}=0x1 +phy_chain_rx_polarity_flip_physical{192.0}=0x0 +phy_chain_rx_polarity_flip_physical{193.0}=0x0 +phy_chain_rx_polarity_flip_physical{194.0}=0x0 +phy_chain_rx_polarity_flip_physical{195.0}=0x1 +phy_chain_rx_polarity_flip_physical{196.0}=0x1 +phy_chain_rx_polarity_flip_physical{197.0}=0x1 +phy_chain_rx_polarity_flip_physical{198.0}=0x1 +phy_chain_rx_polarity_flip_physical{199.0}=0x0 +phy_chain_rx_polarity_flip_physical{2.0}=0x0 +phy_chain_rx_polarity_flip_physical{20.0}=0x0 +phy_chain_rx_polarity_flip_physical{200.0}=0x0 +phy_chain_rx_polarity_flip_physical{201.0}=0x0 +phy_chain_rx_polarity_flip_physical{202.0}=0x0 +phy_chain_rx_polarity_flip_physical{203.0}=0x1 +phy_chain_rx_polarity_flip_physical{204.0}=0x0 +phy_chain_rx_polarity_flip_physical{205.0}=0x1 +phy_chain_rx_polarity_flip_physical{206.0}=0x1 +phy_chain_rx_polarity_flip_physical{207.0}=0x0 +phy_chain_rx_polarity_flip_physical{208.0}=0x0 +phy_chain_rx_polarity_flip_physical{209.0}=0x1 +phy_chain_rx_polarity_flip_physical{21.0}=0x0 +phy_chain_rx_polarity_flip_physical{210.0}=0x1 +phy_chain_rx_polarity_flip_physical{211.0}=0x0 +phy_chain_rx_polarity_flip_physical{212.0}=0x0 +phy_chain_rx_polarity_flip_physical{213.0}=0x0 +phy_chain_rx_polarity_flip_physical{214.0}=0x0 +phy_chain_rx_polarity_flip_physical{215.0}=0x1 +phy_chain_rx_polarity_flip_physical{216.0}=0x0 +phy_chain_rx_polarity_flip_physical{217.0}=0x0 +phy_chain_rx_polarity_flip_physical{218.0}=0x0 +phy_chain_rx_polarity_flip_physical{219.0}=0x1 +phy_chain_rx_polarity_flip_physical{22.0}=0x0 +phy_chain_rx_polarity_flip_physical{220.0}=0x1 +phy_chain_rx_polarity_flip_physical{221.0}=0x0 +phy_chain_rx_polarity_flip_physical{222.0}=0x0 +phy_chain_rx_polarity_flip_physical{223.0}=0x1 +phy_chain_rx_polarity_flip_physical{224.0}=0x1 +phy_chain_rx_polarity_flip_physical{225.0}=0x1 +phy_chain_rx_polarity_flip_physical{226.0}=0x0 +phy_chain_rx_polarity_flip_physical{227.0}=0x0 +phy_chain_rx_polarity_flip_physical{228.0}=0x1 +phy_chain_rx_polarity_flip_physical{229.0}=0x0 +phy_chain_rx_polarity_flip_physical{23.0}=0x1 +phy_chain_rx_polarity_flip_physical{230.0}=0x0 +phy_chain_rx_polarity_flip_physical{231.0}=0x1 +phy_chain_rx_polarity_flip_physical{232.0}=0x1 +phy_chain_rx_polarity_flip_physical{233.0}=0x1 +phy_chain_rx_polarity_flip_physical{234.0}=0x0 +phy_chain_rx_polarity_flip_physical{235.0}=0x0 +phy_chain_rx_polarity_flip_physical{236.0}=0x0 +phy_chain_rx_polarity_flip_physical{237.0}=0x1 +phy_chain_rx_polarity_flip_physical{238.0}=0x0 +phy_chain_rx_polarity_flip_physical{239.0}=0x1 +phy_chain_rx_polarity_flip_physical{24.0}=0x0 +phy_chain_rx_polarity_flip_physical{240.0}=0x0 +phy_chain_rx_polarity_flip_physical{241.0}=0x1 +phy_chain_rx_polarity_flip_physical{242.0}=0x0 +phy_chain_rx_polarity_flip_physical{243.0}=0x1 +phy_chain_rx_polarity_flip_physical{244.0}=0x0 +phy_chain_rx_polarity_flip_physical{245.0}=0x1 +phy_chain_rx_polarity_flip_physical{246.0}=0x1 +phy_chain_rx_polarity_flip_physical{247.0}=0x1 +phy_chain_rx_polarity_flip_physical{248.0}=0x0 +phy_chain_rx_polarity_flip_physical{249.0}=0x0 +phy_chain_rx_polarity_flip_physical{25.0}=0x1 +phy_chain_rx_polarity_flip_physical{250.0}=0x1 +phy_chain_rx_polarity_flip_physical{251.0}=0x0 +phy_chain_rx_polarity_flip_physical{252.0}=0x1 +phy_chain_rx_polarity_flip_physical{253.0}=0x1 +phy_chain_rx_polarity_flip_physical{254.0}=0x0 +phy_chain_rx_polarity_flip_physical{255.0}=0x1 +phy_chain_rx_polarity_flip_physical{256.0}=0x0 +phy_chain_rx_polarity_flip_physical{257.0}=0x0 +phy_chain_rx_polarity_flip_physical{259.0}=0x0 +phy_chain_rx_polarity_flip_physical{26.0}=0x0 +phy_chain_rx_polarity_flip_physical{27.0}=0x1 +phy_chain_rx_polarity_flip_physical{28.0}=0x0 +phy_chain_rx_polarity_flip_physical{29.0}=0x0 +phy_chain_rx_polarity_flip_physical{3.0}=0x1 +phy_chain_rx_polarity_flip_physical{30.0}=0x0 +phy_chain_rx_polarity_flip_physical{31.0}=0x0 +phy_chain_rx_polarity_flip_physical{32.0}=0x1 +phy_chain_rx_polarity_flip_physical{33.0}=0x0 +phy_chain_rx_polarity_flip_physical{34.0}=0x0 +phy_chain_rx_polarity_flip_physical{35.0}=0x1 +phy_chain_rx_polarity_flip_physical{36.0}=0x1 +phy_chain_rx_polarity_flip_physical{37.0}=0x1 +phy_chain_rx_polarity_flip_physical{38.0}=0x1 +phy_chain_rx_polarity_flip_physical{39.0}=0x0 +phy_chain_rx_polarity_flip_physical{4.0}=0x0 +phy_chain_rx_polarity_flip_physical{40.0}=0x0 +phy_chain_rx_polarity_flip_physical{41.0}=0x0 +phy_chain_rx_polarity_flip_physical{42.0}=0x1 +phy_chain_rx_polarity_flip_physical{43.0}=0x1 +phy_chain_rx_polarity_flip_physical{44.0}=0x1 +phy_chain_rx_polarity_flip_physical{45.0}=0x1 +phy_chain_rx_polarity_flip_physical{46.0}=0x0 +phy_chain_rx_polarity_flip_physical{47.0}=0x0 +phy_chain_rx_polarity_flip_physical{48.0}=0x1 +phy_chain_rx_polarity_flip_physical{49.0}=0x1 +phy_chain_rx_polarity_flip_physical{5.0}=0x1 +phy_chain_rx_polarity_flip_physical{50.0}=0x1 +phy_chain_rx_polarity_flip_physical{51.0}=0x0 +phy_chain_rx_polarity_flip_physical{52.0}=0x0 +phy_chain_rx_polarity_flip_physical{53.0}=0x0 +phy_chain_rx_polarity_flip_physical{54.0}=0x0 +phy_chain_rx_polarity_flip_physical{55.0}=0x1 +phy_chain_rx_polarity_flip_physical{56.0}=0x0 +phy_chain_rx_polarity_flip_physical{57.0}=0x0 +phy_chain_rx_polarity_flip_physical{58.0}=0x0 +phy_chain_rx_polarity_flip_physical{59.0}=0x1 +phy_chain_rx_polarity_flip_physical{6.0}=0x0 +phy_chain_rx_polarity_flip_physical{60.0}=0x1 +phy_chain_rx_polarity_flip_physical{61.0}=0x0 +phy_chain_rx_polarity_flip_physical{62.0}=0x0 +phy_chain_rx_polarity_flip_physical{63.0}=0x1 +phy_chain_rx_polarity_flip_physical{64.0}=0x1 +phy_chain_rx_polarity_flip_physical{65.0}=0x1 +phy_chain_rx_polarity_flip_physical{66.0}=0x1 +phy_chain_rx_polarity_flip_physical{67.0}=0x0 +phy_chain_rx_polarity_flip_physical{68.0}=0x1 +phy_chain_rx_polarity_flip_physical{69.0}=0x0 +phy_chain_rx_polarity_flip_physical{7.0}=0x0 +phy_chain_rx_polarity_flip_physical{70.0}=0x0 +phy_chain_rx_polarity_flip_physical{71.0}=0x1 +phy_chain_rx_polarity_flip_physical{72.0}=0x1 +phy_chain_rx_polarity_flip_physical{73.0}=0x1 +phy_chain_rx_polarity_flip_physical{74.0}=0x1 +phy_chain_rx_polarity_flip_physical{75.0}=0x0 +phy_chain_rx_polarity_flip_physical{76.0}=0x0 +phy_chain_rx_polarity_flip_physical{77.0}=0x0 +phy_chain_rx_polarity_flip_physical{78.0}=0x0 +phy_chain_rx_polarity_flip_physical{79.0}=0x1 +phy_chain_rx_polarity_flip_physical{8.0}=0x1 +phy_chain_rx_polarity_flip_physical{80.0}=0x1 +phy_chain_rx_polarity_flip_physical{81.0}=0x1 +phy_chain_rx_polarity_flip_physical{82.0}=0x1 +phy_chain_rx_polarity_flip_physical{83.0}=0x0 +phy_chain_rx_polarity_flip_physical{84.0}=0x0 +phy_chain_rx_polarity_flip_physical{85.0}=0x1 +phy_chain_rx_polarity_flip_physical{86.0}=0x1 +phy_chain_rx_polarity_flip_physical{87.0}=0x0 +phy_chain_rx_polarity_flip_physical{88.0}=0x0 +phy_chain_rx_polarity_flip_physical{89.0}=0x0 +phy_chain_rx_polarity_flip_physical{9.0}=0x1 +phy_chain_rx_polarity_flip_physical{90.0}=0x0 +phy_chain_rx_polarity_flip_physical{91.0}=0x1 +phy_chain_rx_polarity_flip_physical{92.0}=0x1 +phy_chain_rx_polarity_flip_physical{93.0}=0x0 +phy_chain_rx_polarity_flip_physical{94.0}=0x0 +phy_chain_rx_polarity_flip_physical{95.0}=0x1 +phy_chain_rx_polarity_flip_physical{96.0}=0x0 +phy_chain_rx_polarity_flip_physical{97.0}=0x1 +phy_chain_rx_polarity_flip_physical{98.0}=0x1 +phy_chain_rx_polarity_flip_physical{99.0}=0x0 +phy_chain_tx_lane_map_physical{1.0}=0x2031 +phy_chain_tx_lane_map_physical{101.0}=0x1023 +phy_chain_tx_lane_map_physical{105.0}=0x1302 +phy_chain_tx_lane_map_physical{109.0}=0x0321 +phy_chain_tx_lane_map_physical{113.0}=0x2301 +phy_chain_tx_lane_map_physical{117.0}=0x3120 +phy_chain_tx_lane_map_physical{121.0}=0x3102 +phy_chain_tx_lane_map_physical{125.0}=0x3210 +phy_chain_tx_lane_map_physical{129.0}=0x1023 +phy_chain_tx_lane_map_physical{13.0}=0x3021 +phy_chain_tx_lane_map_physical{133.0}=0x3210 +phy_chain_tx_lane_map_physical{137.0}=0x2031 +phy_chain_tx_lane_map_physical{141.0}=0x1302 +phy_chain_tx_lane_map_physical{145.0}=0x3210 +phy_chain_tx_lane_map_physical{149.0}=0x0213 +phy_chain_tx_lane_map_physical{153.0}=0x3210 +phy_chain_tx_lane_map_physical{157.0}=0x1320 +phy_chain_tx_lane_map_physical{161.0}=0x3210 +phy_chain_tx_lane_map_physical{165.0}=0x0231 +phy_chain_tx_lane_map_physical{169.0}=0x3120 +phy_chain_tx_lane_map_physical{17.0}=0x1032 +phy_chain_tx_lane_map_physical{173.0}=0x0312 +phy_chain_tx_lane_map_physical{177.0}=0x0231 +phy_chain_tx_lane_map_physical{181.0}=0x3210 +phy_chain_tx_lane_map_physical{185.0}=0x3210 +phy_chain_tx_lane_map_physical{189.0}=0x1320 +phy_chain_tx_lane_map_physical{193.0}=0x0321 +phy_chain_tx_lane_map_physical{197.0}=0x3120 +phy_chain_tx_lane_map_physical{201.0}=0x3120 +phy_chain_tx_lane_map_physical{205.0}=0x0123 +phy_chain_tx_lane_map_physical{209.0}=0x3120 +phy_chain_tx_lane_map_physical{21.0}=0x0213 +phy_chain_tx_lane_map_physical{213.0}=0x3021 +phy_chain_tx_lane_map_physical{217.0}=0x0312 +phy_chain_tx_lane_map_physical{221.0}=0x2301 +phy_chain_tx_lane_map_physical{225.0}=0x0123 +phy_chain_tx_lane_map_physical{229.0}=0x2031 +phy_chain_tx_lane_map_physical{233.0}=0x0231 +phy_chain_tx_lane_map_physical{237.0}=0x0213 +phy_chain_tx_lane_map_physical{241.0}=0x1320 +phy_chain_tx_lane_map_physical{245.0}=0x2031 +phy_chain_tx_lane_map_physical{249.0}=0x3120 +phy_chain_tx_lane_map_physical{25.0}=0x0231 +phy_chain_tx_lane_map_physical{253.0}=0x0321 +phy_chain_tx_lane_map_physical{257.0}=0x3210 +phy_chain_tx_lane_map_physical{29.0}=0x1230 +phy_chain_tx_lane_map_physical{33.0}=0x1032 +phy_chain_tx_lane_map_physical{37.0}=0x0123 +phy_chain_tx_lane_map_physical{41.0}=0x0213 +phy_chain_tx_lane_map_physical{45.0}=0x0132 +phy_chain_tx_lane_map_physical{49.0}=0x2031 +phy_chain_tx_lane_map_physical{5.0}=0x2301 +phy_chain_tx_lane_map_physical{53.0}=0x2301 +phy_chain_tx_lane_map_physical{57.0}=0x2031 +phy_chain_tx_lane_map_physical{61.0}=0x2031 +phy_chain_tx_lane_map_physical{65.0}=0x1230 +phy_chain_tx_lane_map_physical{69.0}=0x2013 +phy_chain_tx_lane_map_physical{73.0}=0x0213 +phy_chain_tx_lane_map_physical{77.0}=0x2310 +phy_chain_tx_lane_map_physical{81.0}=0x0321 +phy_chain_tx_lane_map_physical{85.0}=0x2013 +phy_chain_tx_lane_map_physical{89.0}=0x0213 +phy_chain_tx_lane_map_physical{9.0}=0x3012 +phy_chain_tx_lane_map_physical{93.0}=0x3102 +phy_chain_tx_lane_map_physical{97.0}=0x3210 +phy_chain_tx_polarity_flip_physical{1.0}=0x0 +phy_chain_tx_polarity_flip_physical{10.0}=0x1 +phy_chain_tx_polarity_flip_physical{100.0}=0x0 +phy_chain_tx_polarity_flip_physical{101.0}=0x0 +phy_chain_tx_polarity_flip_physical{102.0}=0x1 +phy_chain_tx_polarity_flip_physical{103.0}=0x0 +phy_chain_tx_polarity_flip_physical{104.0}=0x0 +phy_chain_tx_polarity_flip_physical{105.0}=0x0 +phy_chain_tx_polarity_flip_physical{106.0}=0x1 +phy_chain_tx_polarity_flip_physical{107.0}=0x1 +phy_chain_tx_polarity_flip_physical{108.0}=0x1 +phy_chain_tx_polarity_flip_physical{109.0}=0x0 +phy_chain_tx_polarity_flip_physical{11.0}=0x1 +phy_chain_tx_polarity_flip_physical{110.0}=0x0 +phy_chain_tx_polarity_flip_physical{111.0}=0x0 +phy_chain_tx_polarity_flip_physical{112.0}=0x1 +phy_chain_tx_polarity_flip_physical{113.0}=0x1 +phy_chain_tx_polarity_flip_physical{114.0}=0x1 +phy_chain_tx_polarity_flip_physical{115.0}=0x1 +phy_chain_tx_polarity_flip_physical{116.0}=0x0 +phy_chain_tx_polarity_flip_physical{117.0}=0x1 +phy_chain_tx_polarity_flip_physical{118.0}=0x0 +phy_chain_tx_polarity_flip_physical{119.0}=0x0 +phy_chain_tx_polarity_flip_physical{12.0}=0x0 +phy_chain_tx_polarity_flip_physical{120.0}=0x0 +phy_chain_tx_polarity_flip_physical{121.0}=0x0 +phy_chain_tx_polarity_flip_physical{122.0}=0x0 +phy_chain_tx_polarity_flip_physical{123.0}=0x0 +phy_chain_tx_polarity_flip_physical{124.0}=0x1 +phy_chain_tx_polarity_flip_physical{125.0}=0x0 +phy_chain_tx_polarity_flip_physical{126.0}=0x1 +phy_chain_tx_polarity_flip_physical{127.0}=0x1 +phy_chain_tx_polarity_flip_physical{128.0}=0x1 +phy_chain_tx_polarity_flip_physical{129.0}=0x1 +phy_chain_tx_polarity_flip_physical{13.0}=0x0 +phy_chain_tx_polarity_flip_physical{130.0}=0x0 +phy_chain_tx_polarity_flip_physical{131.0}=0x1 +phy_chain_tx_polarity_flip_physical{132.0}=0x0 +phy_chain_tx_polarity_flip_physical{133.0}=0x1 +phy_chain_tx_polarity_flip_physical{134.0}=0x1 +phy_chain_tx_polarity_flip_physical{135.0}=0x1 +phy_chain_tx_polarity_flip_physical{136.0}=0x1 +phy_chain_tx_polarity_flip_physical{137.0}=0x1 +phy_chain_tx_polarity_flip_physical{138.0}=0x1 +phy_chain_tx_polarity_flip_physical{139.0}=0x1 +phy_chain_tx_polarity_flip_physical{14.0}=0x1 +phy_chain_tx_polarity_flip_physical{140.0}=0x1 +phy_chain_tx_polarity_flip_physical{141.0}=0x0 +phy_chain_tx_polarity_flip_physical{142.0}=0x1 +phy_chain_tx_polarity_flip_physical{143.0}=0x1 +phy_chain_tx_polarity_flip_physical{144.0}=0x1 +phy_chain_tx_polarity_flip_physical{145.0}=0x1 +phy_chain_tx_polarity_flip_physical{146.0}=0x1 +phy_chain_tx_polarity_flip_physical{147.0}=0x1 +phy_chain_tx_polarity_flip_physical{148.0}=0x0 +phy_chain_tx_polarity_flip_physical{149.0}=0x1 +phy_chain_tx_polarity_flip_physical{15.0}=0x0 +phy_chain_tx_polarity_flip_physical{150.0}=0x0 +phy_chain_tx_polarity_flip_physical{151.0}=0x0 +phy_chain_tx_polarity_flip_physical{152.0}=0x0 +phy_chain_tx_polarity_flip_physical{153.0}=0x1 +phy_chain_tx_polarity_flip_physical{154.0}=0x0 +phy_chain_tx_polarity_flip_physical{155.0}=0x0 +phy_chain_tx_polarity_flip_physical{156.0}=0x0 +phy_chain_tx_polarity_flip_physical{157.0}=0x0 +phy_chain_tx_polarity_flip_physical{158.0}=0x0 +phy_chain_tx_polarity_flip_physical{159.0}=0x0 +phy_chain_tx_polarity_flip_physical{16.0}=0x0 +phy_chain_tx_polarity_flip_physical{160.0}=0x0 +phy_chain_tx_polarity_flip_physical{161.0}=0x0 +phy_chain_tx_polarity_flip_physical{162.0}=0x1 +phy_chain_tx_polarity_flip_physical{163.0}=0x1 +phy_chain_tx_polarity_flip_physical{164.0}=0x0 +phy_chain_tx_polarity_flip_physical{165.0}=0x1 +phy_chain_tx_polarity_flip_physical{166.0}=0x1 +phy_chain_tx_polarity_flip_physical{167.0}=0x1 +phy_chain_tx_polarity_flip_physical{168.0}=0x0 +phy_chain_tx_polarity_flip_physical{169.0}=0x0 +phy_chain_tx_polarity_flip_physical{17.0}=0x0 +phy_chain_tx_polarity_flip_physical{170.0}=0x1 +phy_chain_tx_polarity_flip_physical{171.0}=0x1 +phy_chain_tx_polarity_flip_physical{172.0}=0x1 +phy_chain_tx_polarity_flip_physical{173.0}=0x0 +phy_chain_tx_polarity_flip_physical{174.0}=0x0 +phy_chain_tx_polarity_flip_physical{175.0}=0x1 +phy_chain_tx_polarity_flip_physical{176.0}=0x0 +phy_chain_tx_polarity_flip_physical{177.0}=0x1 +phy_chain_tx_polarity_flip_physical{178.0}=0x0 +phy_chain_tx_polarity_flip_physical{179.0}=0x0 +phy_chain_tx_polarity_flip_physical{18.0}=0x1 +phy_chain_tx_polarity_flip_physical{180.0}=0x0 +phy_chain_tx_polarity_flip_physical{181.0}=0x0 +phy_chain_tx_polarity_flip_physical{182.0}=0x0 +phy_chain_tx_polarity_flip_physical{183.0}=0x0 +phy_chain_tx_polarity_flip_physical{184.0}=0x1 +phy_chain_tx_polarity_flip_physical{185.0}=0x0 +phy_chain_tx_polarity_flip_physical{186.0}=0x1 +phy_chain_tx_polarity_flip_physical{187.0}=0x1 +phy_chain_tx_polarity_flip_physical{188.0}=0x1 +phy_chain_tx_polarity_flip_physical{189.0}=0x0 +phy_chain_tx_polarity_flip_physical{19.0}=0x1 +phy_chain_tx_polarity_flip_physical{190.0}=0x0 +phy_chain_tx_polarity_flip_physical{191.0}=0x0 +phy_chain_tx_polarity_flip_physical{192.0}=0x0 +phy_chain_tx_polarity_flip_physical{193.0}=0x1 +phy_chain_tx_polarity_flip_physical{194.0}=0x1 +phy_chain_tx_polarity_flip_physical{195.0}=0x1 +phy_chain_tx_polarity_flip_physical{196.0}=0x0 +phy_chain_tx_polarity_flip_physical{197.0}=0x0 +phy_chain_tx_polarity_flip_physical{198.0}=0x1 +phy_chain_tx_polarity_flip_physical{199.0}=0x1 +phy_chain_tx_polarity_flip_physical{2.0}=0x1 +phy_chain_tx_polarity_flip_physical{20.0}=0x1 +phy_chain_tx_polarity_flip_physical{200.0}=0x1 +phy_chain_tx_polarity_flip_physical{201.0}=0x1 +phy_chain_tx_polarity_flip_physical{202.0}=0x1 +phy_chain_tx_polarity_flip_physical{203.0}=0x1 +phy_chain_tx_polarity_flip_physical{204.0}=0x1 +phy_chain_tx_polarity_flip_physical{205.0}=0x0 +phy_chain_tx_polarity_flip_physical{206.0}=0x1 +phy_chain_tx_polarity_flip_physical{207.0}=0x1 +phy_chain_tx_polarity_flip_physical{208.0}=0x1 +phy_chain_tx_polarity_flip_physical{209.0}=0x1 +phy_chain_tx_polarity_flip_physical{21.0}=0x0 +phy_chain_tx_polarity_flip_physical{210.0}=0x1 +phy_chain_tx_polarity_flip_physical{211.0}=0x1 +phy_chain_tx_polarity_flip_physical{212.0}=0x0 +phy_chain_tx_polarity_flip_physical{213.0}=0x0 +phy_chain_tx_polarity_flip_physical{214.0}=0x1 +phy_chain_tx_polarity_flip_physical{215.0}=0x0 +phy_chain_tx_polarity_flip_physical{216.0}=0x1 +phy_chain_tx_polarity_flip_physical{217.0}=0x1 +phy_chain_tx_polarity_flip_physical{218.0}=0x1 +phy_chain_tx_polarity_flip_physical{219.0}=0x0 +phy_chain_tx_polarity_flip_physical{22.0}=0x0 +phy_chain_tx_polarity_flip_physical{220.0}=0x1 +phy_chain_tx_polarity_flip_physical{221.0}=0x0 +phy_chain_tx_polarity_flip_physical{222.0}=0x0 +phy_chain_tx_polarity_flip_physical{223.0}=0x0 +phy_chain_tx_polarity_flip_physical{224.0}=0x1 +phy_chain_tx_polarity_flip_physical{225.0}=0x1 +phy_chain_tx_polarity_flip_physical{226.0}=0x1 +phy_chain_tx_polarity_flip_physical{227.0}=0x1 +phy_chain_tx_polarity_flip_physical{228.0}=0x0 +phy_chain_tx_polarity_flip_physical{229.0}=0x0 +phy_chain_tx_polarity_flip_physical{23.0}=0x0 +phy_chain_tx_polarity_flip_physical{230.0}=0x1 +phy_chain_tx_polarity_flip_physical{231.0}=0x1 +phy_chain_tx_polarity_flip_physical{232.0}=0x1 +phy_chain_tx_polarity_flip_physical{233.0}=0x0 +phy_chain_tx_polarity_flip_physical{234.0}=0x0 +phy_chain_tx_polarity_flip_physical{235.0}=0x0 +phy_chain_tx_polarity_flip_physical{236.0}=0x0 +phy_chain_tx_polarity_flip_physical{237.0}=0x1 +phy_chain_tx_polarity_flip_physical{238.0}=0x1 +phy_chain_tx_polarity_flip_physical{239.0}=0x1 +phy_chain_tx_polarity_flip_physical{24.0}=0x0 +phy_chain_tx_polarity_flip_physical{240.0}=0x0 +phy_chain_tx_polarity_flip_physical{241.0}=0x1 +phy_chain_tx_polarity_flip_physical{242.0}=0x1 +phy_chain_tx_polarity_flip_physical{243.0}=0x1 +phy_chain_tx_polarity_flip_physical{244.0}=0x0 +phy_chain_tx_polarity_flip_physical{245.0}=0x1 +phy_chain_tx_polarity_flip_physical{246.0}=0x1 +phy_chain_tx_polarity_flip_physical{247.0}=0x1 +phy_chain_tx_polarity_flip_physical{248.0}=0x1 +phy_chain_tx_polarity_flip_physical{249.0}=0x1 +phy_chain_tx_polarity_flip_physical{25.0}=0x1 +phy_chain_tx_polarity_flip_physical{250.0}=0x0 +phy_chain_tx_polarity_flip_physical{251.0}=0x0 +phy_chain_tx_polarity_flip_physical{252.0}=0x0 +phy_chain_tx_polarity_flip_physical{253.0}=0x1 +phy_chain_tx_polarity_flip_physical{254.0}=0x1 +phy_chain_tx_polarity_flip_physical{255.0}=0x1 +phy_chain_tx_polarity_flip_physical{256.0}=0x0 +phy_chain_tx_polarity_flip_physical{257.0}=0x0 +phy_chain_tx_polarity_flip_physical{259.0}=0x0 +phy_chain_tx_polarity_flip_physical{26.0}=0x0 +phy_chain_tx_polarity_flip_physical{27.0}=0x0 +phy_chain_tx_polarity_flip_physical{28.0}=0x0 +phy_chain_tx_polarity_flip_physical{29.0}=0x1 +phy_chain_tx_polarity_flip_physical{3.0}=0x1 +phy_chain_tx_polarity_flip_physical{30.0}=0x1 +phy_chain_tx_polarity_flip_physical{31.0}=0x1 +phy_chain_tx_polarity_flip_physical{32.0}=0x0 +phy_chain_tx_polarity_flip_physical{33.0}=0x0 +phy_chain_tx_polarity_flip_physical{34.0}=0x0 +phy_chain_tx_polarity_flip_physical{35.0}=0x0 +phy_chain_tx_polarity_flip_physical{36.0}=0x1 +phy_chain_tx_polarity_flip_physical{37.0}=0x1 +phy_chain_tx_polarity_flip_physical{38.0}=0x1 +phy_chain_tx_polarity_flip_physical{39.0}=0x1 +phy_chain_tx_polarity_flip_physical{4.0}=0x1 +phy_chain_tx_polarity_flip_physical{40.0}=0x0 +phy_chain_tx_polarity_flip_physical{41.0}=0x0 +phy_chain_tx_polarity_flip_physical{42.0}=0x0 +phy_chain_tx_polarity_flip_physical{43.0}=0x0 +phy_chain_tx_polarity_flip_physical{44.0}=0x0 +phy_chain_tx_polarity_flip_physical{45.0}=0x1 +phy_chain_tx_polarity_flip_physical{46.0}=0x0 +phy_chain_tx_polarity_flip_physical{47.0}=0x1 +phy_chain_tx_polarity_flip_physical{48.0}=0x1 +phy_chain_tx_polarity_flip_physical{49.0}=0x0 +phy_chain_tx_polarity_flip_physical{5.0}=0x1 +phy_chain_tx_polarity_flip_physical{50.0}=0x0 +phy_chain_tx_polarity_flip_physical{51.0}=0x0 +phy_chain_tx_polarity_flip_physical{52.0}=0x1 +phy_chain_tx_polarity_flip_physical{53.0}=0x0 +phy_chain_tx_polarity_flip_physical{54.0}=0x1 +phy_chain_tx_polarity_flip_physical{55.0}=0x1 +phy_chain_tx_polarity_flip_physical{56.0}=0x0 +phy_chain_tx_polarity_flip_physical{57.0}=0x0 +phy_chain_tx_polarity_flip_physical{58.0}=0x1 +phy_chain_tx_polarity_flip_physical{59.0}=0x1 +phy_chain_tx_polarity_flip_physical{6.0}=0x1 +phy_chain_tx_polarity_flip_physical{60.0}=0x1 +phy_chain_tx_polarity_flip_physical{61.0}=0x0 +phy_chain_tx_polarity_flip_physical{62.0}=0x1 +phy_chain_tx_polarity_flip_physical{63.0}=0x1 +phy_chain_tx_polarity_flip_physical{64.0}=0x1 +phy_chain_tx_polarity_flip_physical{65.0}=0x0 +phy_chain_tx_polarity_flip_physical{66.0}=0x1 +phy_chain_tx_polarity_flip_physical{67.0}=0x1 +phy_chain_tx_polarity_flip_physical{68.0}=0x0 +phy_chain_tx_polarity_flip_physical{69.0}=0x1 +phy_chain_tx_polarity_flip_physical{7.0}=0x1 +phy_chain_tx_polarity_flip_physical{70.0}=0x1 +phy_chain_tx_polarity_flip_physical{71.0}=0x1 +phy_chain_tx_polarity_flip_physical{72.0}=0x0 +phy_chain_tx_polarity_flip_physical{73.0}=0x1 +phy_chain_tx_polarity_flip_physical{74.0}=0x0 +phy_chain_tx_polarity_flip_physical{75.0}=0x0 +phy_chain_tx_polarity_flip_physical{76.0}=0x0 +phy_chain_tx_polarity_flip_physical{77.0}=0x0 +phy_chain_tx_polarity_flip_physical{78.0}=0x0 +phy_chain_tx_polarity_flip_physical{79.0}=0x1 +phy_chain_tx_polarity_flip_physical{8.0}=0x0 +phy_chain_tx_polarity_flip_physical{80.0}=0x0 +phy_chain_tx_polarity_flip_physical{81.0}=0x1 +phy_chain_tx_polarity_flip_physical{82.0}=0x1 +phy_chain_tx_polarity_flip_physical{83.0}=0x1 +phy_chain_tx_polarity_flip_physical{84.0}=0x0 +phy_chain_tx_polarity_flip_physical{85.0}=0x1 +phy_chain_tx_polarity_flip_physical{86.0}=0x0 +phy_chain_tx_polarity_flip_physical{87.0}=0x0 +phy_chain_tx_polarity_flip_physical{88.0}=0x0 +phy_chain_tx_polarity_flip_physical{89.0}=0x1 +phy_chain_tx_polarity_flip_physical{9.0}=0x0 +phy_chain_tx_polarity_flip_physical{90.0}=0x1 +phy_chain_tx_polarity_flip_physical{91.0}=0x1 +phy_chain_tx_polarity_flip_physical{92.0}=0x0 +phy_chain_tx_polarity_flip_physical{93.0}=0x0 +phy_chain_tx_polarity_flip_physical{94.0}=0x0 +phy_chain_tx_polarity_flip_physical{95.0}=0x0 +phy_chain_tx_polarity_flip_physical{96.0}=0x0 +phy_chain_tx_polarity_flip_physical{97.0}=0x0 +phy_chain_tx_polarity_flip_physical{98.0}=0x1 +phy_chain_tx_polarity_flip_physical{99.0}=0x1 +port_init_autoneg_100=0 +port_init_autoneg_102=0 +port_init_autoneg_103=0 +port_init_autoneg_104=0 +port_init_autoneg_105=0 +port_init_autoneg_106=0 +port_init_autoneg_107=0 +port_init_autoneg_108=0 +port_init_autoneg_109=0 +port_init_autoneg_10=0 +port_init_autoneg_110=0 +port_init_autoneg_111=0 +port_init_autoneg_112=0 +port_init_autoneg_113=0 +port_init_autoneg_114=0 +port_init_autoneg_115=0 +port_init_autoneg_116=0 +port_init_autoneg_117=0 +port_init_autoneg_11=0 +port_init_autoneg_12=0 +port_init_autoneg_13=0 +port_init_autoneg_14=0 +port_init_autoneg_15=0 +port_init_autoneg_16=0 +port_init_autoneg_1=0 +port_init_autoneg_2=0 +port_init_autoneg_34=0 +port_init_autoneg_35=0 +port_init_autoneg_36=0 +port_init_autoneg_37=0 +port_init_autoneg_38=0 +port_init_autoneg_39=0 +port_init_autoneg_3=0 +port_init_autoneg_40=0 +port_init_autoneg_41=0 +port_init_autoneg_42=0 +port_init_autoneg_43=0 +port_init_autoneg_44=0 +port_init_autoneg_45=0 +port_init_autoneg_46=0 +port_init_autoneg_47=0 +port_init_autoneg_48=0 +port_init_autoneg_49=0 +port_init_autoneg_4=0 +port_init_autoneg_5=0 +port_init_autoneg_66=0 +port_init_autoneg_68=0 +port_init_autoneg_69=0 +port_init_autoneg_6=0 +port_init_autoneg_70=0 +port_init_autoneg_71=0 +port_init_autoneg_72=0 +port_init_autoneg_73=0 +port_init_autoneg_74=0 +port_init_autoneg_75=0 +port_init_autoneg_76=0 +port_init_autoneg_77=0 +port_init_autoneg_78=0 +port_init_autoneg_79=0 +port_init_autoneg_7=0 +port_init_autoneg_80=0 +port_init_autoneg_81=0 +port_init_autoneg_82=0 +port_init_autoneg_83=0 +port_init_autoneg_8=0 +port_init_autoneg_9=0 +port_init_cl72_hg=1 +port_phy_addr_100=0xff +port_phy_addr_102=0xff +port_phy_addr_103=0xff +port_phy_addr_104=0xff +port_phy_addr_105=0xff +port_phy_addr_106=0xff +port_phy_addr_107=0xff +port_phy_addr_108=0xff +port_phy_addr_109=0xff +port_phy_addr_10=0xff +port_phy_addr_110=0xff +port_phy_addr_111=0xff +port_phy_addr_112=0xff +port_phy_addr_113=0xff +port_phy_addr_114=0xff +port_phy_addr_115=0xff +port_phy_addr_116=0xff +port_phy_addr_117=0xff +port_phy_addr_11=0xff +port_phy_addr_12=0xff +port_phy_addr_13=0xff +port_phy_addr_14=0xff +port_phy_addr_15=0xff +port_phy_addr_16=0xff +port_phy_addr_1=0xff +port_phy_addr_2=0xff +port_phy_addr_34=0xff +port_phy_addr_35=0xff +port_phy_addr_36=0xff +port_phy_addr_37=0xff +port_phy_addr_38=0xff +port_phy_addr_39=0xff +port_phy_addr_3=0xff +port_phy_addr_40=0xff +port_phy_addr_41=0xff +port_phy_addr_42=0xff +port_phy_addr_43=0xff +port_phy_addr_44=0xff +port_phy_addr_45=0xff +port_phy_addr_46=0xff +port_phy_addr_47=0xff +port_phy_addr_48=0xff +port_phy_addr_49=0xff +port_phy_addr_4=0xff +port_phy_addr_5=0xff +port_phy_addr_66=0xff +port_phy_addr_68=0xff +port_phy_addr_69=0xff +port_phy_addr_6=0xff +port_phy_addr_70=0xff +port_phy_addr_71=0xff +port_phy_addr_72=0xff +port_phy_addr_73=0xff +port_phy_addr_74=0xff +port_phy_addr_75=0xff +port_phy_addr_76=0xff +port_phy_addr_77=0xff +port_phy_addr_78=0xff +port_phy_addr_79=0xff +port_phy_addr_7=0xff +port_phy_addr_80=0xff +port_phy_addr_81=0xff +port_phy_addr_82=0xff +port_phy_addr_83=0xff +port_phy_addr_8=0xff +port_phy_addr_9=0xff +portmap_100=259:10 +portmap_101=262:10 +portmap_102=217:100 +portmap_103=213:100 +portmap_104=229:100 +portmap_105=237:100 +portmap_106=249:100 +portmap_107=245:100 +portmap_108=209:100 +portmap_109=221:100 +portmap_10=29:100 +portmap_110=233:100 +portmap_111=225:100 +portmap_112=241:100 +portmap_113=253:100 +portmap_114=197:100 +portmap_115=205:100 +portmap_116=201:100 +portmap_117=193:100 +portmap_11=41:100 +portmap_12=33:100 +portmap_134=263:10 +portmap_13=57:100 +portmap_14=53:100 +portmap_15=49:100 +portmap_16=61:100 +portmap_1=5:100 +portmap_2=13:100 +portmap_33=260:10 +portmap_34=77:100 +portmap_35=65:100 +portmap_36=85:100 +portmap_37=89:100 +portmap_38=109:100 +portmap_39=97:100 +portmap_3=25:100 +portmap_40=69:100 +portmap_41=73:100 +portmap_42=93:100 +portmap_43=81:100 +portmap_44=101:100 +portmap_45=105:100 +portmap_46=117:100 +portmap_47=121:100 +portmap_48=125:100 +portmap_49=113:100 +portmap_4=21:100 +portmap_5=37:100 +portmap_66=257:10 +portmap_67=261:10 +portmap_68=149:100 +portmap_69=153:100 +portmap_6=45:100 +portmap_70=173:100 +portmap_71=161:100 +portmap_72=181:100 +portmap_73=185:100 +portmap_74=157:100 +portmap_75=145:100 +portmap_76=165:100 +portmap_77=169:100 +portmap_78=189:100 +portmap_79=177:100 +portmap_7=9:100 +portmap_80=141:100 +portmap_81=133:100 +portmap_82=129:100 +portmap_83=137:100 +portmap_8=1:100 +portmap_9=17:100 +robust_hash_disable_egress_vlan=1 +robust_hash_disable_mpls=1 +robust_hash_disable_vlan=1 +scache_filename=/tmp/scache +scache_filename=/tmp/scache +sram_scan_enable=0 +stable_size=0x5500000 +stable_size=0x5500000 +tdma_timeout_usec=15000000 +tslam_timeout_usec=15000000 + +# tuning parameters +serdes_preemphasis_1=0x184606 +serdes_preemphasis_2=0x164108 +serdes_preemphasis_3=0x164308 +serdes_preemphasis_4=0x144108 +serdes_preemphasis_5=0x144108 +serdes_preemphasis_6=0x164106 +serdes_preemphasis_7=0x184507 +serdes_preemphasis_8=0x184606 +serdes_preemphasis_9=0x184507 +serdes_preemphasis_10=0x194407 +serdes_preemphasis_11=0x194407 +serdes_preemphasis_12=0x184507 +serdes_preemphasis_13=0x144108 +serdes_preemphasis_14=0x144108 +serdes_preemphasis_15=0x194407 +serdes_preemphasis_16=0x194407 +serdes_preemphasis_34=0x184408 +serdes_preemphasis_35=0x184606 +serdes_preemphasis_36=0x164308 +serdes_preemphasis_37=0x184606 +serdes_preemphasis_38=0x164108 +serdes_preemphasis_39=0x184606 +serdes_preemphasis_40=0xe3206 +serdes_preemphasis_41=0xe3205 +serdes_preemphasis_42=0x103a06 +serdes_preemphasis_43=0xe3205 +serdes_preemphasis_44=0x184606 +serdes_preemphasis_45=0x184507 +serdes_preemphasis_46=0x144108 +serdes_preemphasis_47=0x103a07 +serdes_preemphasis_48=0x194407 +serdes_preemphasis_49=0x194407 +serdes_preemphasis_66=0x62f01 +serdes_preemphasis_68=0x164308 +serdes_preemphasis_69=0x164408 +serdes_preemphasis_70=0xe3206 +serdes_preemphasis_71=0xe3205 +serdes_preemphasis_72=0xe3205 +serdes_preemphasis_73=0xe3206 +serdes_preemphasis_74=0x164108 +serdes_preemphasis_75=0x184606 +serdes_preemphasis_76=0x164608 +serdes_preemphasis_77=0x184507 +serdes_preemphasis_78=0x184507 +serdes_preemphasis_79=0x184606 +serdes_preemphasis_80=0x184606 +serdes_preemphasis_81=0x184407 +serdes_preemphasis_82=0x103706 +serdes_preemphasis_83=0x103706 +serdes_preemphasis_100=0x62f01 +serdes_preemphasis_102=0x184408 +serdes_preemphasis_103=0x184606 +serdes_preemphasis_104=0x184606 +serdes_preemphasis_105=0x16410a +serdes_preemphasis_106=0x184408 +serdes_preemphasis_107=0x194308 +serdes_preemphasis_108=0x144108 +serdes_preemphasis_109=0x144108 +serdes_preemphasis_110=0x144108 +serdes_preemphasis_111=0x144108 +serdes_preemphasis_112=0x164608 +serdes_preemphasis_113=0x164608 +serdes_preemphasis_114=0x174507 +serdes_preemphasis_115=0x184606 +serdes_preemphasis_116=0x103706 +serdes_preemphasis_117=0x133c06 diff --git a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/sai.profile b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/sai.profile index b8652e10e4d9..4618972dbba9 100644 --- a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/sai.profile +++ b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-seastone-dx010-96x10G-16x50G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-seastone-dx010-96x10G-16x50G.config.bcm diff --git a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/th-seastone-dx010-96x10G-16x50G.config.bcm b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/th-seastone-dx010-96x10G-16x50G.config.bcm new file mode 100644 index 000000000000..b62320f7c50b --- /dev/null +++ b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-10-50/th-seastone-dx010-96x10G-16x50G.config.bcm @@ -0,0 +1,927 @@ +# Define default OS / SAL +os=unix + +# all XPORTs to XE ports +#pbmp_xport_xe=0x1fffffffe +pbmp_xport_xe=0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe +pbmp_oversubscribe=0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe + +# Mode control to select L2 Table DMA mode aka L2MODE_POLL (0) or +# L2MOD_FIFO mechanism aka L2MODE_FIFO (1) for L2 table change notification. +l2xmsg_mode=1 + +# Memory table size configs +l2_mem_entries=8192 +l3_mem_entries=8192 +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +mmu_lossless=0 + +################################################################################### +# Celestica Customize for SeaStone +################################################################################### + +#ext mdio frequency to 495/0x80/2(1.933Mhz) or 415/0x80/2(1.62MHz) +# default is 40 +# Set external MDIO freq to 6.19MHz (495MHz) or 5.19MHz (415MHz) +#* target_freq is core_clock_freq * DIVIDEND / DIVISOR / 2 +# +rate_ext_mdio_divisor=0x80 + +# use internal rom boot +phy_ext_rom_boot=0 + +#fpem_mem_entries=32768 +oversubscribe_mode=1 +#pbmp_xport_xe=0x3fd000000ff4000003fc000001fe + +dport_map_enable=1 + +dport_map_port_68=1 +dport_map_port_69=2 +dport_map_port_70=3 +dport_map_port_71=4 + +dport_map_port_72=5 +dport_map_port_73=6 +dport_map_port_74=7 +dport_map_port_75=8 + +dport_map_port_76=9 +dport_map_port_77=10 +dport_map_port_78=11 +dport_map_port_79=12 + +dport_map_port_80=13 +dport_map_port_81=14 +dport_map_port_82=15 +dport_map_port_83=16 + +dport_map_port_34=17 +dport_map_port_35=18 +dport_map_port_36=19 +dport_map_port_37=20 + +dport_map_port_38=21 +dport_map_port_39=22 +dport_map_port_40=23 +dport_map_port_41=24 + +dport_map_port_42=25 +dport_map_port_43=26 +dport_map_port_44=27 +dport_map_port_45=28 + +dport_map_port_46=29 +dport_map_port_47=30 +dport_map_port_48=31 +dport_map_port_49=32 + +dport_map_port_50=33 +dport_map_port_51=34 +dport_map_port_52=35 +dport_map_port_53=36 + +dport_map_port_54=37 +dport_map_port_55=38 +dport_map_port_56=39 +dport_map_port_57=40 + +dport_map_port_58=41 +dport_map_port_59=42 +dport_map_port_60=43 +dport_map_port_61=44 + +dport_map_port_62=45 +dport_map_port_63=46 +dport_map_port_64=47 +dport_map_port_65=48 + +dport_map_port_84=49 +dport_map_port_85=50 +dport_map_port_86=51 +dport_map_port_87=52 + +dport_map_port_88=53 +dport_map_port_89=54 +dport_map_port_90=55 +dport_map_port_91=56 + +dport_map_port_92=57 +dport_map_port_93=58 +dport_map_port_94=59 +dport_map_port_95=60 + +dport_map_port_96=61 +dport_map_port_97=62 +dport_map_port_98=63 +dport_map_port_99=64 + +dport_map_port_102=65 +dport_map_port_103=66 +dport_map_port_104=67 +dport_map_port_105=68 + +dport_map_port_106=69 +dport_map_port_107=70 +dport_map_port_108=71 +dport_map_port_109=72 + +dport_map_port_110=73 +dport_map_port_111=74 +dport_map_port_112=75 +dport_map_port_113=76 + +dport_map_port_114=77 +dport_map_port_115=78 +dport_map_port_116=79 +dport_map_port_117=80 + +dport_map_port_1=81 +dport_map_port_2=82 +dport_map_port_3=83 +dport_map_port_4=84 + +dport_map_port_5=85 +dport_map_port_6=86 +dport_map_port_7=87 +dport_map_port_8=88 + +dport_map_port_9=89 +dport_map_port_10=90 +dport_map_port_11=91 +dport_map_port_12=92 + +dport_map_port_13=93 +dport_map_port_14=94 +dport_map_port_15=95 +dport_map_port_16=96 + + +dport_map_port_17=97 +dport_map_port_18=98 + +dport_map_port_21=101 +dport_map_port_22=102 + +dport_map_port_25=105 +dport_map_port_26=106 + +dport_map_port_29=109 +dport_map_port_30=110 + +dport_map_port_118=113 +dport_map_port_119=114 + +dport_map_port_122=117 +dport_map_port_123=118 + +dport_map_port_126=121 +dport_map_port_127=122 + +dport_map_port_130=125 +dport_map_port_131=126 + + +# port mapping +portmap_68=65:10 +portmap_69=66:10 +portmap_70=67:10 +portmap_71=68:10 + +portmap_72=69:10 +portmap_73=70:10 +portmap_74=71:10 +portmap_75=72:10 + +portmap_76=73:10 +portmap_77=74:10 +portmap_78=75:10 +portmap_79=76:10 + +portmap_80=77:10 +portmap_81=78:10 +portmap_82=79:10 +portmap_83=80:10 + +portmap_34=33:10 +portmap_35=34:10 +portmap_36=35:10 +portmap_37=36:10 + +portmap_38=37:10 +portmap_39=38:10 +portmap_40=39:10 +portmap_41=40:10 + +portmap_42=41:10 +portmap_43=42:10 +portmap_44=43:10 +portmap_45=44:10 + +portmap_46=45:10 +portmap_47=46:10 +portmap_48=47:10 +portmap_49=48:10 + +portmap_50=49:10 +portmap_51=50:10 +portmap_52=51:10 +portmap_53=52:10 + +portmap_54=53:10 +portmap_55=54:10 +portmap_56=55:10 +portmap_57=56:10 + +portmap_58=57:10 +portmap_59=58:10 +portmap_60=59:10 +portmap_61=60:10 + +portmap_62=61:10 +portmap_63=62:10 +portmap_64=63:10 +portmap_65=64:10 + +portmap_84=81:10 +portmap_85=82:10 +portmap_86=83:10 +portmap_87=84:10 + +portmap_88=85:10 +portmap_89=86:10 +portmap_90=87:10 +portmap_91=88:10 + +portmap_92=89:10 +portmap_93=90:10 +portmap_94=91:10 +portmap_95=92:10 + +portmap_96=93:10 +portmap_97=94:10 +portmap_98=95:10 +portmap_99=96:10 + +portmap_102=97:10 +portmap_103=98:10 +portmap_104=99:10 +portmap_105=100:10 + +portmap_106=101:10 +portmap_107=102:10 +portmap_108=103:10 +portmap_109=104:10 + +portmap_110=105:10 +portmap_111=106:10 +portmap_112=107:10 +portmap_113=108:10 + +portmap_114=109:10 +portmap_115=110:10 +portmap_116=111:10 +portmap_117=112:10 + +portmap_1=1:10 +portmap_2=2:10 +portmap_3=3:10 +portmap_4=4:10 + +portmap_5=5:10 +portmap_6=6:10 +portmap_7=7:10 +portmap_8=8:10 + +portmap_9=9:10 +portmap_10=10:10 +portmap_11=11:10 +portmap_12=12:10 + +portmap_13=13:10 +portmap_14=14:10 +portmap_15=15:10 +portmap_16=16:10 + + +portmap_17=17:50:2 +portmap_18=19:50:2 + +portmap_21=21:50:2 +portmap_22=23:50:2 + +portmap_25=25:50:2 +portmap_26=27:50:2 + +portmap_29=29:50:2 +portmap_30=31:50:2 + +portmap_118=113:50:2 +portmap_119=115:50:2 + +portmap_122=117:50:2 +portmap_123=119:50:2 + +portmap_126=121:50:2 +portmap_127=123:50:2 + +portmap_130=125:50:2 +portmap_131=127:50:2 + +#portmap_66=129:10 +#portmap_100=131:10 + +#WC16 +xgxs_tx_lane_map_68=0x3201 +xgxs_rx_lane_map_68=0x2310 +xgxs_tx_lane_map_69=0x3201 +xgxs_rx_lane_map_69=0x2310 +xgxs_tx_lane_map_70=0x3201 +xgxs_rx_lane_map_70=0x2310 +xgxs_tx_lane_map_71=0x3201 +xgxs_rx_lane_map_71=0x2310 + + +#WC17 +xgxs_tx_lane_map_72=0x3201 +xgxs_rx_lane_map_72=0x2301 +xgxs_tx_lane_map_73=0x3201 +xgxs_rx_lane_map_73=0x2301 +xgxs_tx_lane_map_74=0x3201 +xgxs_rx_lane_map_74=0x2301 +xgxs_tx_lane_map_75=0x3201 +xgxs_rx_lane_map_75=0x2301 + +#WC18 +xgxs_tx_lane_map_76=0x0132 +xgxs_rx_lane_map_76=0x0123 +xgxs_tx_lane_map_77=0x0132 +xgxs_rx_lane_map_77=0x0123 +xgxs_tx_lane_map_78=0x0132 +xgxs_rx_lane_map_78=0x0123 +xgxs_tx_lane_map_79=0x0132 +xgxs_rx_lane_map_79=0x0123 + +#WC19 +xgxs_tx_lane_map_80=0x2031 +xgxs_rx_lane_map_80=0x1320 +xgxs_tx_lane_map_81=0x2031 +xgxs_rx_lane_map_81=0x1320 +xgxs_tx_lane_map_82=0x2031 +xgxs_rx_lane_map_82=0x1320 +xgxs_tx_lane_map_83=0x2031 +xgxs_rx_lane_map_83=0x1320 + +#WC8 +#xgxs_tx_lane_map_34=0x3021 +#xgxs_rx_lane_map_34=0x0213 +#xgxs_tx_lane_map_35=0x3021 +#xgxs_rx_lane_map_35=0x0213 +#xgxs_tx_lane_map_36=0x3021 +#xgxs_rx_lane_map_36=0x0213 +#xgxs_tx_lane_map_37=0x3021 +#xgxs_rx_lane_map_37=0x0213 + +xgxs_tx_lane_map_34=0x3021 +xgxs_rx_lane_map_34=0x0213 +xgxs_tx_lane_map_35=0x3021 +xgxs_rx_lane_map_35=0x0213 +xgxs_tx_lane_map_36=0x3021 +xgxs_rx_lane_map_36=0x0213 +xgxs_tx_lane_map_37=0x3021 +xgxs_rx_lane_map_37=0x0213 + +#WC9 +xgxs_tx_lane_map_38=0x3210 +xgxs_rx_lane_map_38=0x1023 +xgxs_tx_lane_map_39=0x3210 +xgxs_rx_lane_map_39=0x1023 +xgxs_tx_lane_map_40=0x3210 +xgxs_rx_lane_map_40=0x1023 +xgxs_tx_lane_map_41=0x3210 +xgxs_rx_lane_map_41=0x1023 + +#WC10 +xgxs_tx_lane_map_42=0x2310 +xgxs_rx_lane_map_42=0x3210 +xgxs_tx_lane_map_43=0x2310 +xgxs_rx_lane_map_43=0x3210 +xgxs_tx_lane_map_44=0x2310 +xgxs_rx_lane_map_44=0x3210 +xgxs_tx_lane_map_45=0x2310 +xgxs_rx_lane_map_45=0x3210 + +#WC11 +xgxs_tx_lane_map_46=0x1032 +xgxs_rx_lane_map_46=0x1302 +xgxs_tx_lane_map_47=0x1032 +xgxs_rx_lane_map_47=0x1302 +xgxs_tx_lane_map_48=0x1032 +xgxs_rx_lane_map_48=0x1302 +xgxs_tx_lane_map_49=0x1032 +xgxs_rx_lane_map_49=0x1302 + +#WC12 +xgxs_tx_lane_map_50=0x3201 +xgxs_rx_lane_map_50=0x0213 +xgxs_tx_lane_map_51=0x3201 +xgxs_rx_lane_map_51=0x0213 +xgxs_tx_lane_map_52=0x3201 +xgxs_rx_lane_map_52=0x0213 +xgxs_tx_lane_map_53=0x3201 +xgxs_rx_lane_map_53=0x0213 + + +#WC13 +xgxs_tx_lane_map_54=0x2301 +xgxs_rx_lane_map_54=0x2310 +xgxs_tx_lane_map_55=0x2301 +xgxs_rx_lane_map_55=0x2310 +xgxs_tx_lane_map_56=0x2301 +xgxs_rx_lane_map_56=0x2310 +xgxs_tx_lane_map_57=0x2301 +xgxs_rx_lane_map_57=0x2310 + +#WC14 +xgxs_tx_lane_map_58=0x3201 +xgxs_rx_lane_map_58=0x0213 +xgxs_tx_lane_map_59=0x3201 +xgxs_rx_lane_map_59=0x0213 +xgxs_tx_lane_map_60=0x3201 +xgxs_rx_lane_map_60=0x0213 +xgxs_tx_lane_map_61=0x3201 +xgxs_rx_lane_map_61=0x0213 + +#WC15 +xgxs_tx_lane_map_62=0x1302 +xgxs_rx_lane_map_62=0x2310 +xgxs_tx_lane_map_63=0x1302 +xgxs_rx_lane_map_63=0x2310 +xgxs_tx_lane_map_64=0x1302 +xgxs_rx_lane_map_64=0x2310 +xgxs_tx_lane_map_65=0x1302 +xgxs_rx_lane_map_65=0x2310 + +#WC20 +xgxs_tx_lane_map_84=0x0213 +xgxs_rx_lane_map_84=0x2301 +xgxs_tx_lane_map_85=0x0213 +xgxs_rx_lane_map_85=0x2301 +xgxs_tx_lane_map_86=0x0213 +xgxs_rx_lane_map_86=0x2301 +xgxs_tx_lane_map_87=0x0213 +xgxs_rx_lane_map_87=0x2301 + +#WC21 +xgxs_tx_lane_map_88=0x0132 +xgxs_rx_lane_map_88=0x3210 +xgxs_tx_lane_map_89=0x0132 +xgxs_rx_lane_map_89=0x3210 +xgxs_tx_lane_map_90=0x0132 +xgxs_rx_lane_map_90=0x3210 +xgxs_tx_lane_map_91=0x0132 +xgxs_rx_lane_map_91=0x3210 + +#WC22 +xgxs_tx_lane_map_92=0x0132 +xgxs_rx_lane_map_92=0x2031 +xgxs_tx_lane_map_93=0x0132 +xgxs_rx_lane_map_93=0x2031 +xgxs_tx_lane_map_94=0x0132 +xgxs_rx_lane_map_94=0x2031 +xgxs_tx_lane_map_95=0x0132 +xgxs_rx_lane_map_95=0x2031 + +#WC23 +xgxs_tx_lane_map_96=0x2031 +xgxs_rx_lane_map_96=0x3201 +xgxs_tx_lane_map_97=0x2031 +xgxs_rx_lane_map_97=0x3201 +xgxs_tx_lane_map_98=0x2031 +xgxs_rx_lane_map_98=0x3201 +xgxs_tx_lane_map_99=0x2031 +xgxs_rx_lane_map_99=0x3201 + +#WC24 +xgxs_tx_lane_map_102=0x0132 +xgxs_rx_lane_map_102=0x2301 +xgxs_tx_lane_map_103=0x0132 +xgxs_rx_lane_map_103=0x2301 +xgxs_tx_lane_map_104=0x0132 +xgxs_rx_lane_map_104=0x2301 +xgxs_tx_lane_map_105=0x0132 +xgxs_rx_lane_map_105=0x2301 + +#WC25 +xgxs_tx_lane_map_106=0x0132 +xgxs_rx_lane_map_106=0x3201 +xgxs_tx_lane_map_107=0x0132 +xgxs_rx_lane_map_107=0x3201 +xgxs_tx_lane_map_108=0x0132 +xgxs_rx_lane_map_108=0x3201 +xgxs_tx_lane_map_109=0x0132 +xgxs_rx_lane_map_109=0x3201 + +#WC26 +xgxs_tx_lane_map_110=0x0132 +xgxs_rx_lane_map_110=0x2031 +xgxs_tx_lane_map_111=0x0132 +xgxs_rx_lane_map_111=0x2031 +xgxs_tx_lane_map_112=0x0132 +xgxs_rx_lane_map_112=0x2031 +xgxs_tx_lane_map_113=0x0132 +xgxs_rx_lane_map_113=0x2031 + +#WC27 +xgxs_tx_lane_map_114=0x2031 +xgxs_rx_lane_map_114=0x2301 +xgxs_tx_lane_map_115=0x2031 +xgxs_rx_lane_map_115=0x2301 +xgxs_tx_lane_map_116=0x2031 +xgxs_rx_lane_map_116=0x2301 +xgxs_tx_lane_map_117=0x2031 +xgxs_rx_lane_map_117=0x2301 + + +#WC0 +xgxs_tx_lane_map_1=0x3210 +xgxs_rx_lane_map_1=0x3120 +xgxs_tx_lane_map_2=0x3210 +xgxs_rx_lane_map_2=0x3120 +xgxs_tx_lane_map_3=0x3210 +xgxs_rx_lane_map_3=0x3120 +xgxs_tx_lane_map_4=0x3210 +xgxs_rx_lane_map_4=0x3120 + +#WC1 +xgxs_tx_lane_map_5=0x0132 +xgxs_rx_lane_map_5=0x1023 +xgxs_tx_lane_map_6=0x0132 +xgxs_rx_lane_map_6=0x1023 +xgxs_tx_lane_map_7=0x0132 +xgxs_rx_lane_map_7=0x1023 +xgxs_tx_lane_map_8=0x0132 +xgxs_rx_lane_map_8=0x1023 + +#WC2 +xgxs_tx_lane_map_9=0x3201 +xgxs_rx_lane_map_9=0x3120 +xgxs_tx_lane_map_10=0x3201 +xgxs_rx_lane_map_10=0x3120 +xgxs_tx_lane_map_11=0x3201 +xgxs_rx_lane_map_11=0x3120 +xgxs_tx_lane_map_12=0x3201 +xgxs_rx_lane_map_12=0x3120 + +#WC3 +xgxs_tx_lane_map_13=0x2031 +xgxs_rx_lane_map_13=0x1032 +xgxs_tx_lane_map_14=0x2031 +xgxs_rx_lane_map_14=0x1032 +xgxs_tx_lane_map_15=0x2031 +xgxs_rx_lane_map_15=0x1032 +xgxs_tx_lane_map_16=0x2031 +xgxs_rx_lane_map_16=0x1032 + +#WC4 +xgxs_tx_lane_map_17=0x2310 +xgxs_rx_lane_map_17=0x3210 +xgxs_tx_lane_map_18=0x2310 +xgxs_rx_lane_map_18=0x3210 + +#WC5 +xgxs_tx_lane_map_21=0x2301 +xgxs_rx_lane_map_21=0x3120 +xgxs_tx_lane_map_22=0x2301 +xgxs_rx_lane_map_22=0x3120 + +#WC6 +xgxs_tx_lane_map_25=0x3201 +xgxs_rx_lane_map_25=0x0213 +xgxs_tx_lane_map_26=0x3201 +xgxs_rx_lane_map_26=0x0213 + +#WC7 +xgxs_tx_lane_map_29=0x1302 +xgxs_rx_lane_map_29=0x1023 +xgxs_tx_lane_map_30=0x1302 +xgxs_rx_lane_map_30=0x1023 + +#WC28 +xgxs_tx_lane_map_118=0x1320 +xgxs_rx_lane_map_118=0x1302 +xgxs_tx_lane_map_119=0x1320 +xgxs_rx_lane_map_119=0x1302 + +#WC29 +xgxs_tx_lane_map_122=0x1032 +xgxs_rx_lane_map_122=0x1023 +xgxs_tx_lane_map_123=0x1032 +xgxs_rx_lane_map_123=0x1023 + +#WC30 +xgxs_tx_lane_map_126=0x3120 +xgxs_rx_lane_map_126=0x3120 +xgxs_tx_lane_map_127=0x3120 +xgxs_rx_lane_map_127=0x3120 + +#WC31 +xgxs_tx_lane_map_130=0x1302 +xgxs_rx_lane_map_130=0x2310 +xgxs_tx_lane_map_131=0x1302 +xgxs_rx_lane_map_131=0x2310 + + + + +#PN + +#WC16 +phy_xaui_tx_polarity_flip_68=0x0000 +phy_xaui_rx_polarity_flip_68=0x0000 +phy_xaui_tx_polarity_flip_69=0x0000 +phy_xaui_rx_polarity_flip_69=0x0000 +phy_xaui_tx_polarity_flip_70=0x0000 +phy_xaui_rx_polarity_flip_70=0x0000 +phy_xaui_tx_polarity_flip_71=0x0000 +phy_xaui_rx_polarity_flip_71=0x0000 + +#WC17 +phy_xaui_tx_polarity_flip_72=0x0001 +phy_xaui_rx_polarity_flip_72=0x0000 +phy_xaui_tx_polarity_flip_73=0x0000 +phy_xaui_rx_polarity_flip_73=0x0001 +phy_xaui_tx_polarity_flip_74=0x0001 +phy_xaui_rx_polarity_flip_74=0x0000 +phy_xaui_tx_polarity_flip_75=0x0001 +phy_xaui_rx_polarity_flip_75=0x0000 + +#WC18 +phy_xaui_tx_polarity_flip_76=0x0001 +phy_xaui_rx_polarity_flip_76=0x0000 +phy_xaui_tx_polarity_flip_77=0x0001 +phy_xaui_rx_polarity_flip_77=0x0000 +phy_xaui_tx_polarity_flip_78=0x0001 +phy_xaui_rx_polarity_flip_78=0x0000 +phy_xaui_tx_polarity_flip_79=0x0001 +phy_xaui_rx_polarity_flip_79=0x0000 + +#WC19 +phy_xaui_tx_polarity_flip_80=0x0001 +phy_xaui_rx_polarity_flip_80=0x0001 +phy_xaui_tx_polarity_flip_81=0x0001 +phy_xaui_rx_polarity_flip_81=0x0001 +phy_xaui_tx_polarity_flip_82=0x0001 +phy_xaui_rx_polarity_flip_82=0x0001 +phy_xaui_tx_polarity_flip_83=0x0001 +phy_xaui_rx_polarity_flip_83=0x0001 + +#WC8 +phy_xaui_tx_polarity_flip_34=0x0000 +phy_xaui_rx_polarity_flip_34=0x0000 +phy_xaui_tx_polarity_flip_35=0x0001 +phy_xaui_rx_polarity_flip_35=0x0000 +phy_xaui_tx_polarity_flip_36=0x0001 +phy_xaui_rx_polarity_flip_36=0x0000 +phy_xaui_tx_polarity_flip_37=0x0001 +phy_xaui_rx_polarity_flip_37=0x0000 + +#WC9 +phy_xaui_tx_polarity_flip_38=0x0000 +phy_xaui_rx_polarity_flip_38=0x0000 +phy_xaui_tx_polarity_flip_39=0x0000 +phy_xaui_rx_polarity_flip_39=0x0000 +phy_xaui_tx_polarity_flip_40=0x0000 +phy_xaui_rx_polarity_flip_40=0x0000 +phy_xaui_tx_polarity_flip_41=0x0001 +phy_xaui_rx_polarity_flip_41=0x0000 + +#WC10 +phy_xaui_tx_polarity_flip_42=0x0001 +phy_xaui_rx_polarity_flip_42=0x0000 +phy_xaui_tx_polarity_flip_43=0x0000 +phy_xaui_rx_polarity_flip_43=0x0000 +phy_xaui_tx_polarity_flip_44=0x0001 +phy_xaui_rx_polarity_flip_44=0x0000 +phy_xaui_tx_polarity_flip_45=0x0001 +phy_xaui_rx_polarity_flip_45=0x0000 + +#WC11 +phy_xaui_tx_polarity_flip_46=0x0000 +phy_xaui_rx_polarity_flip_46=0x0000 +phy_xaui_tx_polarity_flip_47=0x0000 +phy_xaui_rx_polarity_flip_47=0x0000 +phy_xaui_tx_polarity_flip_48=0x0000 +phy_xaui_rx_polarity_flip_48=0x0000 +phy_xaui_tx_polarity_flip_49=0x0000 +phy_xaui_rx_polarity_flip_49=0x0000 + +#WC12 +phy_xaui_tx_polarity_flip_50=0x0000 +phy_xaui_rx_polarity_flip_50=0x0000 +phy_xaui_tx_polarity_flip_51=0x0001 +phy_xaui_rx_polarity_flip_51=0x0000 +phy_xaui_tx_polarity_flip_52=0x0000 +phy_xaui_rx_polarity_flip_52=0x0000 +phy_xaui_tx_polarity_flip_53=0x0000 +phy_xaui_rx_polarity_flip_53=0x0000 + +#WC13 +phy_xaui_tx_polarity_flip_54=0x0000 +phy_xaui_rx_polarity_flip_54=0x0000 +phy_xaui_tx_polarity_flip_55=0x0001 +phy_xaui_rx_polarity_flip_55=0x0000 +phy_xaui_tx_polarity_flip_56=0x0000 +phy_xaui_rx_polarity_flip_56=0x0000 +phy_xaui_tx_polarity_flip_57=0x0000 +phy_xaui_rx_polarity_flip_57=0x0000 + +#WC14 +phy_xaui_tx_polarity_flip_58=0x0000 +phy_xaui_rx_polarity_flip_58=0x0000 +phy_xaui_tx_polarity_flip_59=0x0000 +phy_xaui_rx_polarity_flip_59=0x0000 +phy_xaui_tx_polarity_flip_60=0x0000 +phy_xaui_rx_polarity_flip_60=0x0000 +phy_xaui_tx_polarity_flip_61=0x0000 +phy_xaui_rx_polarity_flip_61=0x0000 + +#WC15 +phy_xaui_tx_polarity_flip_62=0x0000 +phy_xaui_rx_polarity_flip_62=0x0001 +phy_xaui_tx_polarity_flip_63=0x0001 +phy_xaui_rx_polarity_flip_63=0x0001 +phy_xaui_tx_polarity_flip_64=0x0000 +phy_xaui_rx_polarity_flip_64=0x0001 +phy_xaui_tx_polarity_flip_65=0x0001 +phy_xaui_rx_polarity_flip_65=0x0001 + +#WC20 +phy_xaui_tx_polarity_flip_84=0x0001 +phy_xaui_rx_polarity_flip_84=0x0000 +phy_xaui_tx_polarity_flip_85=0x0001 +phy_xaui_rx_polarity_flip_85=0x0001 +phy_xaui_tx_polarity_flip_86=0x0001 +phy_xaui_rx_polarity_flip_86=0x0001 +phy_xaui_tx_polarity_flip_87=0x0000 +phy_xaui_rx_polarity_flip_87=0x0001 + +#WC21 +phy_xaui_tx_polarity_flip_88=0x0001 +phy_xaui_rx_polarity_flip_88=0x0001 +phy_xaui_tx_polarity_flip_89=0x0000 +phy_xaui_rx_polarity_flip_89=0x0000 +phy_xaui_tx_polarity_flip_90=0x0001 +phy_xaui_rx_polarity_flip_90=0x0001 +phy_xaui_tx_polarity_flip_91=0x0001 +phy_xaui_rx_polarity_flip_91=0x0001 + +#WC22 +phy_xaui_tx_polarity_flip_92=0x0001 +phy_xaui_rx_polarity_flip_92=0x0000 +phy_xaui_tx_polarity_flip_93=0x0001 +phy_xaui_rx_polarity_flip_93=0x0000 +phy_xaui_tx_polarity_flip_94=0x0001 +phy_xaui_rx_polarity_flip_94=0x0000 +phy_xaui_tx_polarity_flip_95=0x0001 +phy_xaui_rx_polarity_flip_95=0x0001 + +#WC23 +phy_xaui_tx_polarity_flip_96=0x0001 +phy_xaui_rx_polarity_flip_96=0x0000 +phy_xaui_tx_polarity_flip_97=0x0000 +phy_xaui_rx_polarity_flip_97=0x0000 +phy_xaui_tx_polarity_flip_98=0x0001 +phy_xaui_rx_polarity_flip_98=0x0000 +phy_xaui_tx_polarity_flip_99=0x0000 +phy_xaui_rx_polarity_flip_99=0x0000 + +#WC24 +phy_xaui_tx_polarity_flip_102=0x0000 +phy_xaui_rx_polarity_flip_102=0x0001 +phy_xaui_tx_polarity_flip_103=0x0000 +phy_xaui_rx_polarity_flip_103=0x0001 +phy_xaui_tx_polarity_flip_104=0x0000 +phy_xaui_rx_polarity_flip_104=0x0001 +phy_xaui_tx_polarity_flip_105=0x0000 +phy_xaui_rx_polarity_flip_105=0x0001 + +#WC25 +phy_xaui_tx_polarity_flip_106=0x0001 +phy_xaui_rx_polarity_flip_106=0x0000 +phy_xaui_tx_polarity_flip_107=0x0001 +phy_xaui_rx_polarity_flip_107=0x0000 +phy_xaui_tx_polarity_flip_108=0x0001 +phy_xaui_rx_polarity_flip_108=0x0000 +phy_xaui_tx_polarity_flip_109=0x0001 +phy_xaui_rx_polarity_flip_109=0x0000 + +#WC26 +phy_xaui_tx_polarity_flip_110=0x0001 +phy_xaui_rx_polarity_flip_110=0x0001 +phy_xaui_tx_polarity_flip_111=0x0001 +phy_xaui_rx_polarity_flip_111=0x0001 +phy_xaui_tx_polarity_flip_112=0x0001 +phy_xaui_rx_polarity_flip_112=0x0001 +phy_xaui_tx_polarity_flip_113=0x0001 +phy_xaui_rx_polarity_flip_113=0x0001 + +#WC27 +phy_xaui_tx_polarity_flip_114=0x0001 +phy_xaui_rx_polarity_flip_114=0x0001 +phy_xaui_tx_polarity_flip_115=0x0001 +phy_xaui_rx_polarity_flip_115=0x0001 +phy_xaui_tx_polarity_flip_116=0x0001 +phy_xaui_rx_polarity_flip_116=0x0001 +phy_xaui_tx_polarity_flip_117=0x0001 +phy_xaui_rx_polarity_flip_117=0x0000 + +#WC0 +phy_xaui_tx_polarity_flip_1=0x0001 +phy_xaui_rx_polarity_flip_1=0x0001 +phy_xaui_tx_polarity_flip_2=0x0001 +phy_xaui_rx_polarity_flip_2=0x0001 +phy_xaui_tx_polarity_flip_3=0x0000 +phy_xaui_rx_polarity_flip_3=0x0001 +phy_xaui_tx_polarity_flip_4=0x0000 +phy_xaui_rx_polarity_flip_4=0x0001 + +#WC1 +phy_xaui_tx_polarity_flip_5=0x0001 +phy_xaui_rx_polarity_flip_5=0x0000 +phy_xaui_tx_polarity_flip_6=0x0001 +phy_xaui_rx_polarity_flip_6=0x0000 +phy_xaui_tx_polarity_flip_7=0x0001 +phy_xaui_rx_polarity_flip_7=0x0000 +phy_xaui_tx_polarity_flip_8=0x0000 +phy_xaui_rx_polarity_flip_8=0x0000 + +#WC2 +phy_xaui_tx_polarity_flip_9=0x0000 +phy_xaui_rx_polarity_flip_9=0x0000 +phy_xaui_tx_polarity_flip_10=0x0001 +phy_xaui_rx_polarity_flip_10=0x0000 +phy_xaui_tx_polarity_flip_11=0x0000 +phy_xaui_rx_polarity_flip_11=0x0000 +phy_xaui_tx_polarity_flip_12=0x0000 +phy_xaui_rx_polarity_flip_12=0x0001 + +#WC3 +phy_xaui_tx_polarity_flip_13=0x0001 +phy_xaui_rx_polarity_flip_13=0x0000 +phy_xaui_tx_polarity_flip_14=0x0001 +phy_xaui_rx_polarity_flip_14=0x0000 +phy_xaui_tx_polarity_flip_15=0x0001 +phy_xaui_rx_polarity_flip_15=0x0000 +phy_xaui_tx_polarity_flip_16=0x0001 +phy_xaui_rx_polarity_flip_16=0x0000 + +#WC4 +phy_xaui_tx_polarity_flip_17=0x0003 +phy_xaui_rx_polarity_flip_17=0x0000 +phy_xaui_tx_polarity_flip_18=0x0001 +phy_xaui_rx_polarity_flip_18=0x0000 + +#WC5 +phy_xaui_tx_polarity_flip_21=0x0000 +phy_xaui_rx_polarity_flip_21=0x0000 +phy_xaui_tx_polarity_flip_22=0x0000 +phy_xaui_rx_polarity_flip_22=0x0000 + +#WC6 +phy_xaui_tx_polarity_flip_25=0x0002 +phy_xaui_rx_polarity_flip_25=0x0001 +phy_xaui_tx_polarity_flip_26=0x0000 +phy_xaui_rx_polarity_flip_26=0x0001 + +#WC7 +phy_xaui_tx_polarity_flip_29=0x0002 +phy_xaui_rx_polarity_flip_29=0x0000 +phy_xaui_tx_polarity_flip_30=0x0000 +phy_xaui_rx_polarity_flip_30=0x0000 + +#WC28 +phy_xaui_tx_polarity_flip_118=0x0003 +phy_xaui_rx_polarity_flip_118=0x0003 +phy_xaui_tx_polarity_flip_119=0x0003 +phy_xaui_rx_polarity_flip_119=0x0003 + +#WC29 +phy_xaui_tx_polarity_flip_122=0x0000 +phy_xaui_rx_polarity_flip_122=0x0000 +phy_xaui_tx_polarity_flip_123=0x0001 +phy_xaui_rx_polarity_flip_123=0x0000 + +#WC30 +phy_xaui_tx_polarity_flip_126=0x0003 +phy_xaui_rx_polarity_flip_126=0x0000 +phy_xaui_tx_polarity_flip_127=0x0003 +phy_xaui_rx_polarity_flip_127=0x0000 + +#WC31 +phy_xaui_tx_polarity_flip_130=0x0002 +phy_xaui_rx_polarity_flip_130=0x0000 +phy_xaui_tx_polarity_flip_131=0x0001 +phy_xaui_rx_polarity_flip_131=0x0000 + diff --git a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/sai.profile b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/sai.profile index ced857611967..075fdfde2229 100644 --- a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/sai.profile +++ b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-seastone-dx010-64x50G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-seastone-dx010-64x50G.config.bcm diff --git a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/th-seastone-dx010-64x50G.config.bcm b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/th-seastone-dx010-64x50G.config.bcm new file mode 100644 index 000000000000..07814e52ac4a --- /dev/null +++ b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010-50/th-seastone-dx010-64x50G.config.bcm @@ -0,0 +1,621 @@ +# Define default OS / SAL +os=unix + +# all XPORTs to XE ports +#pbmp_xport_xe=0x1fffffffe +pbmp_xport_xe=0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe +pbmp_oversubscribe=0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe + +# Mode control to select L2 Table DMA mode aka L2MODE_POLL (0) or +# L2MOD_FIFO mechanism aka L2MODE_FIFO (1) for L2 table change notification. +l2xmsg_mode=1 + +# Memory table size configs +l2_mem_entries=8192 +l3_mem_entries=8192 +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +mmu_lossless=0 + +################################################################################### +# Celestica Customize for SeaStone +################################################################################### + +#ext mdio frequency to 495/0x80/2(1.933Mhz) or 415/0x80/2(1.62MHz) +# default is 40 +# Set external MDIO freq to 6.19MHz (495MHz) or 5.19MHz (415MHz) +#* target_freq is core_clock_freq * DIVIDEND / DIVISOR / 2 +# +rate_ext_mdio_divisor=0x80 + +# use internal rom boot +phy_ext_rom_boot=0 + +#fpem_mem_entries=32768 +oversubscribe_mode=1 +#pbmp_xport_xe=0x3fd000000ff4000003fc000001fe + +dport_map_enable=1 +dport_map_port_68=1 +dport_map_port_69=2 + +dport_map_port_72=5 +dport_map_port_73=6 + +dport_map_port_76=9 +dport_map_port_77=10 + +dport_map_port_80=13 +dport_map_port_81=14 + +dport_map_port_34=17 +dport_map_port_35=18 + +dport_map_port_38=21 +dport_map_port_39=22 + +dport_map_port_42=25 +dport_map_port_43=26 + +dport_map_port_46=29 +dport_map_port_47=30 + +dport_map_port_50=33 +dport_map_port_51=34 + +dport_map_port_54=37 +dport_map_port_55=38 + +dport_map_port_58=41 +dport_map_port_59=42 + +dport_map_port_62=45 +dport_map_port_63=46 + +dport_map_port_84=49 +dport_map_port_85=50 + +dport_map_port_88=53 +dport_map_port_89=54 + +dport_map_port_92=57 +dport_map_port_93=58 + +dport_map_port_96=61 +dport_map_port_97=62 + +dport_map_port_102=65 +dport_map_port_103=66 + +dport_map_port_106=69 +dport_map_port_107=70 + +dport_map_port_110=73 +dport_map_port_111=74 + +dport_map_port_114=77 +dport_map_port_115=78 + +dport_map_port_1=81 +dport_map_port_2=82 + +dport_map_port_5=85 +dport_map_port_6=86 + +dport_map_port_9=89 +dport_map_port_10=90 + +dport_map_port_13=93 +dport_map_port_14=94 + +dport_map_port_17=97 +dport_map_port_18=98 + +dport_map_port_21=101 +dport_map_port_22=102 + +dport_map_port_25=105 +dport_map_port_26=106 + +dport_map_port_29=109 +dport_map_port_30=110 + +dport_map_port_118=113 +dport_map_port_119=114 + +dport_map_port_122=117 +dport_map_port_123=118 + +dport_map_port_126=121 +dport_map_port_127=122 + +dport_map_port_130=125 +dport_map_port_131=126 + + +# port mapping +portmap_68=65:50:2 +portmap_69=67:50:2 + +portmap_72=69:50:2 +portmap_73=71:50:2 + +portmap_76=73:50:2 +portmap_77=75:50:2 + +portmap_80=77:50:2 +portmap_81=79:50:2 + +portmap_34=33:50:2 +portmap_35=35:50:2 + +portmap_38=37:50:2 +portmap_39=39:50:2 + +portmap_42=41:50:2 +portmap_43=43:50:2 + +portmap_46=45:50:2 +portmap_47=47:50:2 + +portmap_50=49:50:2 +portmap_51=51:50:2 + +portmap_54=53:50:2 +portmap_55=55:50:2 + +portmap_58=57:50:2 +portmap_59=59:50:2 + +portmap_62=61:50:2 +portmap_63=63:50:2 + +portmap_84=81:50:2 +portmap_85=83:50:2 + +portmap_88=85:50:2 +portmap_89=87:50:2 + +portmap_92=89:50:2 +portmap_93=91:50:2 + +portmap_96=93:50:2 +portmap_97=95:50:2 + +portmap_102=97:50:2 +portmap_103=99:50:2 + +portmap_106=101:50:2 +portmap_107=103:50:2 + +portmap_110=105:50:2 +portmap_111=107:50:2 + +portmap_114=109:50:2 +portmap_115=111:50:2 + +portmap_1=1:50:2 +portmap_2=3:50:2 + +portmap_5=5:50:2 +portmap_6=7:50:2 + +portmap_9=9:50:2 +portmap_10=11:50:2 + +portmap_13=13:50:2 +portmap_14=15:50:2 + +portmap_17=17:50:2 +portmap_18=19:50:2 + +portmap_21=21:50:2 +portmap_22=23:50:2 + +portmap_25=25:50:2 +portmap_26=27:50:2 + +portmap_29=29:50:2 +portmap_30=31:50:2 + +portmap_118=113:50:2 +portmap_119=115:50:2 + +portmap_122=117:50:2 +portmap_123=119:50:2 + +portmap_126=121:50:2 +portmap_127=123:50:2 + +portmap_130=125:50:2 +portmap_131=127:50:2 + + +#WC16 +xgxs_tx_lane_map_68=0x3201 +xgxs_rx_lane_map_68=0x2310 +xgxs_tx_lane_map_69=0x3201 +xgxs_rx_lane_map_69=0x2310 + + +#WC17 +xgxs_tx_lane_map_72=0x3201 +xgxs_rx_lane_map_72=0x2301 +xgxs_tx_lane_map_73=0x3201 +xgxs_rx_lane_map_73=0x2301 + +#WC18 +xgxs_tx_lane_map_76=0x0132 +xgxs_rx_lane_map_76=0x0123 +xgxs_tx_lane_map_77=0x0132 +xgxs_rx_lane_map_77=0x0123 + +#WC19 +xgxs_tx_lane_map_80=0x2031 +xgxs_rx_lane_map_80=0x1320 +xgxs_tx_lane_map_81=0x2031 +xgxs_rx_lane_map_81=0x1320 + +#WC8 +xgxs_tx_lane_map_34=0x3021 +xgxs_rx_lane_map_34=0x0213 +xgxs_tx_lane_map_35=0x3021 +xgxs_rx_lane_map_35=0x0213 + +#WC9 +xgxs_tx_lane_map_38=0x3210 +xgxs_rx_lane_map_38=0x1023 +xgxs_tx_lane_map_39=0x3210 +xgxs_rx_lane_map_39=0x1023 + +#WC10 +xgxs_tx_lane_map_42=0x2310 +xgxs_rx_lane_map_42=0x3210 +xgxs_tx_lane_map_43=0x2310 +xgxs_rx_lane_map_43=0x3210 + +#WC11 +xgxs_tx_lane_map_46=0x1032 +xgxs_rx_lane_map_46=0x1302 +xgxs_tx_lane_map_47=0x1032 +xgxs_rx_lane_map_47=0x1302 + +#WC12 +xgxs_tx_lane_map_50=0x3201 +xgxs_rx_lane_map_50=0x0213 +xgxs_tx_lane_map_51=0x3201 +xgxs_rx_lane_map_51=0x0213 + + +#WC13 +xgxs_tx_lane_map_54=0x2301 +xgxs_rx_lane_map_54=0x2310 +xgxs_tx_lane_map_55=0x2301 +xgxs_rx_lane_map_55=0x2310 + +#WC14 +xgxs_tx_lane_map_58=0x3201 +xgxs_rx_lane_map_58=0x0213 +xgxs_tx_lane_map_59=0x3201 +xgxs_rx_lane_map_59=0x0213 + +#WC15 +xgxs_tx_lane_map_62=0x1302 +xgxs_rx_lane_map_62=0x2310 +xgxs_tx_lane_map_63=0x1302 +xgxs_rx_lane_map_63=0x2310 + +#WC20 +xgxs_tx_lane_map_84=0x0213 +xgxs_rx_lane_map_84=0x2301 +xgxs_tx_lane_map_85=0x0213 +xgxs_rx_lane_map_85=0x2301 + +#WC21 +xgxs_tx_lane_map_88=0x0132 +xgxs_rx_lane_map_88=0x3210 +xgxs_tx_lane_map_89=0x0132 +xgxs_rx_lane_map_89=0x3210 + +#WC22 +xgxs_tx_lane_map_92=0x0132 +xgxs_rx_lane_map_92=0x2031 +xgxs_tx_lane_map_93=0x0132 +xgxs_rx_lane_map_93=0x2031 + +#WC23 +xgxs_tx_lane_map_96=0x2031 +xgxs_rx_lane_map_96=0x3201 +xgxs_tx_lane_map_97=0x2031 +xgxs_rx_lane_map_97=0x3201 + +#WC24 +xgxs_tx_lane_map_102=0x0132 +xgxs_rx_lane_map_102=0x2301 +xgxs_tx_lane_map_103=0x0132 +xgxs_rx_lane_map_103=0x2301 + +#WC25 +xgxs_tx_lane_map_106=0x0132 +xgxs_rx_lane_map_106=0x3201 +xgxs_tx_lane_map_107=0x0132 +xgxs_rx_lane_map_107=0x3201 + +#WC26 +xgxs_tx_lane_map_110=0x0132 +xgxs_rx_lane_map_110=0x2031 +xgxs_tx_lane_map_111=0x0132 +xgxs_rx_lane_map_111=0x2031 + +#WC27 +xgxs_tx_lane_map_114=0x2031 +xgxs_rx_lane_map_114=0x2301 +xgxs_tx_lane_map_115=0x2031 +xgxs_rx_lane_map_115=0x2301 + + +#WC0 +xgxs_tx_lane_map_1=0x3210 +xgxs_rx_lane_map_1=0x3120 +xgxs_tx_lane_map_2=0x3210 +xgxs_rx_lane_map_2=0x3120 + +#WC1 +xgxs_tx_lane_map_5=0x0132 +xgxs_rx_lane_map_5=0x1023 +xgxs_tx_lane_map_6=0x0132 +xgxs_rx_lane_map_6=0x1023 + +#WC2 +xgxs_tx_lane_map_9=0x3201 +xgxs_rx_lane_map_9=0x3120 +xgxs_tx_lane_map_10=0x3201 +xgxs_rx_lane_map_10=0x3120 + +#WC3 +xgxs_tx_lane_map_13=0x2031 +xgxs_rx_lane_map_13=0x1032 +xgxs_tx_lane_map_14=0x2031 +xgxs_rx_lane_map_14=0x1032 + +#WC4 +xgxs_tx_lane_map_17=0x2310 +xgxs_rx_lane_map_17=0x3210 +xgxs_tx_lane_map_18=0x2310 +xgxs_rx_lane_map_18=0x3210 + +#WC5 +xgxs_tx_lane_map_21=0x2301 +xgxs_rx_lane_map_21=0x3120 +xgxs_tx_lane_map_22=0x2301 +xgxs_rx_lane_map_22=0x3120 + +#WC6 +xgxs_tx_lane_map_25=0x3201 +xgxs_rx_lane_map_25=0x0213 +xgxs_tx_lane_map_26=0x3201 +xgxs_rx_lane_map_26=0x0213 + +#WC7 +xgxs_tx_lane_map_29=0x1302 +xgxs_rx_lane_map_29=0x1023 +xgxs_tx_lane_map_30=0x1302 +xgxs_rx_lane_map_30=0x1023 + +#WC28 +xgxs_tx_lane_map_118=0x1320 +xgxs_rx_lane_map_118=0x1302 +xgxs_tx_lane_map_119=0x1320 +xgxs_rx_lane_map_119=0x1302 + +#WC29 +xgxs_tx_lane_map_122=0x1032 +xgxs_rx_lane_map_122=0x1023 +xgxs_tx_lane_map_123=0x1032 +xgxs_rx_lane_map_123=0x1023 + +#WC30 +xgxs_tx_lane_map_126=0x3120 +xgxs_rx_lane_map_126=0x3120 +xgxs_tx_lane_map_127=0x3120 +xgxs_rx_lane_map_127=0x3120 + +#WC31 +xgxs_tx_lane_map_130=0x1302 +xgxs_rx_lane_map_130=0x2310 +xgxs_tx_lane_map_131=0x1302 +xgxs_rx_lane_map_131=0x2310 + +#PN + +#WC16 +phy_xaui_tx_polarity_flip_68=0x0000 +phy_xaui_rx_polarity_flip_68=0x0000 +phy_xaui_tx_polarity_flip_69=0x0000 +phy_xaui_rx_polarity_flip_69=0x0000 + +#WC17 +phy_xaui_tx_polarity_flip_72=0x0001 +phy_xaui_rx_polarity_flip_72=0x0002 +phy_xaui_tx_polarity_flip_73=0x0003 +phy_xaui_rx_polarity_flip_73=0x0000 + +#WC18 +phy_xaui_tx_polarity_flip_76=0x0003 +phy_xaui_rx_polarity_flip_76=0x0000 +phy_xaui_tx_polarity_flip_77=0x0003 +phy_xaui_rx_polarity_flip_77=0x0000 + +#WC19 +phy_xaui_tx_polarity_flip_80=0x0003 +phy_xaui_rx_polarity_flip_80=0x0003 +phy_xaui_tx_polarity_flip_81=0x0003 +phy_xaui_rx_polarity_flip_81=0x0003 + +#WC8 +phy_xaui_tx_polarity_flip_34=0x0002 +phy_xaui_rx_polarity_flip_34=0x0000 +phy_xaui_tx_polarity_flip_35=0x0003 +phy_xaui_rx_polarity_flip_35=0x0000 + +#WC9 +phy_xaui_tx_polarity_flip_38=0x0000 +phy_xaui_rx_polarity_flip_38=0x0000 +phy_xaui_tx_polarity_flip_39=0x0002 +phy_xaui_rx_polarity_flip_39=0x0000 + +#WC10 +phy_xaui_tx_polarity_flip_42=0x0001 +phy_xaui_rx_polarity_flip_42=0x0000 +phy_xaui_tx_polarity_flip_43=0x0003 +phy_xaui_rx_polarity_flip_43=0x0000 + +#WC11 +phy_xaui_tx_polarity_flip_46=0x0000 +phy_xaui_rx_polarity_flip_46=0x0000 +phy_xaui_tx_polarity_flip_47=0x0000 +phy_xaui_rx_polarity_flip_47=0x0000 + +#WC12 +phy_xaui_tx_polarity_flip_50=0x0002 +phy_xaui_rx_polarity_flip_50=0x0000 +phy_xaui_tx_polarity_flip_51=0x0000 +phy_xaui_rx_polarity_flip_51=0x0000 + +#WC13 +phy_xaui_tx_polarity_flip_54=0x0002 +phy_xaui_rx_polarity_flip_54=0x0000 +phy_xaui_tx_polarity_flip_55=0x0000 +phy_xaui_rx_polarity_flip_55=0x0000 + +#WC14 +phy_xaui_tx_polarity_flip_58=0x0000 +phy_xaui_rx_polarity_flip_58=0x0000 +phy_xaui_tx_polarity_flip_59=0x0000 +phy_xaui_rx_polarity_flip_59=0x0000 + +#WC15 +phy_xaui_tx_polarity_flip_62=0x0002 +phy_xaui_rx_polarity_flip_62=0x0003 +phy_xaui_tx_polarity_flip_63=0x0002 +phy_xaui_rx_polarity_flip_63=0x0003 + +#WC20 +phy_xaui_tx_polarity_flip_84=0x0003 +phy_xaui_rx_polarity_flip_84=0x0002 +phy_xaui_tx_polarity_flip_85=0x0001 +phy_xaui_rx_polarity_flip_85=0x0003 + +#WC21 +phy_xaui_tx_polarity_flip_88=0x0001 +phy_xaui_rx_polarity_flip_88=0x0001 +phy_xaui_tx_polarity_flip_89=0x0003 +phy_xaui_rx_polarity_flip_89=0x0003 + +#WC22 +phy_xaui_tx_polarity_flip_92=0x0003 +phy_xaui_rx_polarity_flip_92=0x0000 +phy_xaui_tx_polarity_flip_93=0x0003 +phy_xaui_rx_polarity_flip_93=0x0002 + +#WC23 +phy_xaui_tx_polarity_flip_96=0x0001 +phy_xaui_rx_polarity_flip_96=0x0000 +phy_xaui_tx_polarity_flip_97=0x0001 +phy_xaui_rx_polarity_flip_97=0x0000 + +#WC24 +phy_xaui_tx_polarity_flip_102=0x0000 +phy_xaui_rx_polarity_flip_102=0x0003 +phy_xaui_tx_polarity_flip_103=0x0000 +phy_xaui_rx_polarity_flip_103=0x0003 + +#WC25 +phy_xaui_tx_polarity_flip_106=0x0003 +phy_xaui_rx_polarity_flip_106=0x0000 +phy_xaui_tx_polarity_flip_107=0x0003 +phy_xaui_rx_polarity_flip_107=0x0000 + +#WC26 +phy_xaui_tx_polarity_flip_110=0x0003 +phy_xaui_rx_polarity_flip_110=0x0003 +phy_xaui_tx_polarity_flip_111=0x0003 +phy_xaui_rx_polarity_flip_111=0x0003 + +#WC27 +phy_xaui_tx_polarity_flip_114=0x0003 +phy_xaui_rx_polarity_flip_114=0x0003 +phy_xaui_tx_polarity_flip_115=0x0003 +phy_xaui_rx_polarity_flip_115=0x0001 + +#WC0 +phy_xaui_tx_polarity_flip_1=0x0003 +phy_xaui_rx_polarity_flip_1=0x0003 +phy_xaui_tx_polarity_flip_2=0x0000 +phy_xaui_rx_polarity_flip_2=0x0003 + +#WC1 +phy_xaui_tx_polarity_flip_5=0x0003 +phy_xaui_rx_polarity_flip_5=0x0000 +phy_xaui_tx_polarity_flip_6=0x0001 +phy_xaui_rx_polarity_flip_6=0x0000 + +#WC2 +phy_xaui_tx_polarity_flip_9=0x0002 +phy_xaui_rx_polarity_flip_9=0x0000 +phy_xaui_tx_polarity_flip_10=0x0000 +phy_xaui_rx_polarity_flip_10=0x0002 + +#WC3 +phy_xaui_tx_polarity_flip_13=0x0003 +phy_xaui_rx_polarity_flip_13=0x0000 +phy_xaui_tx_polarity_flip_14=0x0003 +phy_xaui_rx_polarity_flip_14=0x0000 + +#WC4 +phy_xaui_tx_polarity_flip_17=0x0003 +phy_xaui_rx_polarity_flip_17=0x0000 +phy_xaui_tx_polarity_flip_18=0x0001 +phy_xaui_rx_polarity_flip_18=0x0000 + +#WC5 +phy_xaui_tx_polarity_flip_21=0x0000 +phy_xaui_rx_polarity_flip_21=0x0000 +phy_xaui_tx_polarity_flip_22=0x0000 +phy_xaui_rx_polarity_flip_22=0x0000 + +#WC6 +phy_xaui_tx_polarity_flip_25=0x0002 +phy_xaui_rx_polarity_flip_25=0x0001 +phy_xaui_tx_polarity_flip_26=0x0000 +phy_xaui_rx_polarity_flip_26=0x0001 + +#WC7 +phy_xaui_tx_polarity_flip_29=0x0002 +phy_xaui_rx_polarity_flip_29=0x0000 +phy_xaui_tx_polarity_flip_30=0x0000 +phy_xaui_rx_polarity_flip_30=0x0000 + +#WC28 +phy_xaui_tx_polarity_flip_118=0x0003 +phy_xaui_rx_polarity_flip_118=0x0003 +phy_xaui_tx_polarity_flip_119=0x0003 +phy_xaui_rx_polarity_flip_119=0x0003 + +#WC29 +phy_xaui_tx_polarity_flip_122=0x0000 +phy_xaui_rx_polarity_flip_122=0x0000 +phy_xaui_tx_polarity_flip_123=0x0001 +phy_xaui_rx_polarity_flip_123=0x0000 + +#WC30 +phy_xaui_tx_polarity_flip_126=0x0003 +phy_xaui_rx_polarity_flip_126=0x0000 +phy_xaui_tx_polarity_flip_127=0x0003 +phy_xaui_rx_polarity_flip_127=0x0000 + +#WC31 +phy_xaui_tx_polarity_flip_130=0x0002 +phy_xaui_rx_polarity_flip_130=0x0000 +phy_xaui_tx_polarity_flip_131=0x0001 +phy_xaui_rx_polarity_flip_131=0x0000 diff --git a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/sai.profile b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/sai.profile index 8db218c89a52..072467af3e9a 100644 --- a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/sai.profile +++ b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-seastone-dx010-32x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-seastone-dx010-32x100G.config.bcm diff --git a/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/th-seastone-dx010-32x100G.config.bcm b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/th-seastone-dx010-32x100G.config.bcm new file mode 100644 index 000000000000..c8f3523189e3 --- /dev/null +++ b/device/celestica/x86_64-cel_seastone-r0/Seastone-DX010/th-seastone-dx010-32x100G.config.bcm @@ -0,0 +1,374 @@ +# Define default OS / SAL +os=unix + +# all XPORTs to XE ports +#pbmp_xport_xe=0x1fffffffe +pbmp_xport_xe=0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe +pbmp_oversubscribe=0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe + +# Mode control to select L2 Table DMA mode aka L2MODE_POLL (0) or +# L2MOD_FIFO mechanism aka L2MODE_FIFO (1) for L2 table change notification. +l2xmsg_mode=1 + +# Memory table size configs +l2_mem_entries=8192 +l3_mem_entries=8192 +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +mmu_lossless=0 + +################################################################################### +# Celestica Customize for SeaStone +################################################################################### + +#ext mdio frequency to 495/0x80/2(1.933Mhz) or 415/0x80/2(1.62MHz) +# default is 40 +# Set external MDIO freq to 6.19MHz (495MHz) or 5.19MHz (415MHz) +#* target_freq is core_clock_freq * DIVIDEND / DIVISOR / 2 +# +rate_ext_mdio_divisor=0x80 + +# use internal rom boot +phy_ext_rom_boot=0 + +#fpem_mem_entries=32768 +oversubscribe_mode=1 +#pbmp_xport_xe=0x3fd000000ff4000003fc000001fe + + +dport_map_enable=1 + +dport_map_port_68=1 +dport_map_port_72=5 +dport_map_port_76=9 +dport_map_port_80=13 +dport_map_port_34=17 +dport_map_port_38=21 +dport_map_port_42=25 +dport_map_port_46=29 +dport_map_port_50=33 +dport_map_port_54=37 +dport_map_port_58=41 +dport_map_port_62=45 +dport_map_port_84=49 +dport_map_port_88=53 +dport_map_port_92=57 +dport_map_port_96=61 +dport_map_port_102=65 +dport_map_port_106=69 +dport_map_port_110=73 +dport_map_port_114=77 +dport_map_port_1=81 +dport_map_port_5=85 +dport_map_port_9=89 +dport_map_port_13=93 +dport_map_port_17=97 +dport_map_port_21=101 +dport_map_port_25=105 +dport_map_port_29=109 +dport_map_port_118=113 +dport_map_port_122=117 +dport_map_port_126=121 +dport_map_port_130=125 + + +# port mapping +portmap_68=65:100:4 +portmap_72=69:100:4 +portmap_76=73:100:4 +portmap_80=77:100:4 +portmap_34=33:100:4 +portmap_38=37:100:4 +portmap_42=41:100:4 +portmap_46=45:100:4 +portmap_50=49:100:4 +portmap_54=53:100:4 +portmap_58=57:100:4 +portmap_62=61:100:4 +portmap_84=81:100:4 +portmap_88=85:100:4 +portmap_92=89:100:4 +portmap_96=93:100:4 +portmap_102=97:100:4 +portmap_106=101:100:4 +portmap_110=105:100:4 +portmap_114=109:100:4 +portmap_1=1:100:4 +portmap_5=5:100:4 +portmap_9=9:100:4 +portmap_13=13:100:4 +portmap_17=17:100:4 +portmap_21=21:100:4 +portmap_25=25:100:4 +portmap_29=29:100:4 +portmap_118=113:100:4 +portmap_122=117:100:4 +portmap_126=121:100:4 +portmap_130=125:100:4 +#portmap_66=129:10 +#portmap_100=131:10 + +#WC16 +xgxs_tx_lane_map_68=0x3201 +xgxs_rx_lane_map_68=0x2310 + + +#WC17 +xgxs_tx_lane_map_72=0x3201 +xgxs_rx_lane_map_72=0x2301 + +#WC18 +xgxs_tx_lane_map_76=0x0132 +xgxs_rx_lane_map_76=0x0123 + +#WC19 +xgxs_tx_lane_map_80=0x2031 +xgxs_rx_lane_map_80=0x1320 + +#WC8 +xgxs_tx_lane_map_34=0x3021 +xgxs_rx_lane_map_34=0x0213 + +#WC9 +xgxs_tx_lane_map_38=0x3210 +xgxs_rx_lane_map_38=0x1023 + +#WC10 +xgxs_tx_lane_map_42=0x2310 +xgxs_rx_lane_map_42=0x3210 + +#WC11 +xgxs_tx_lane_map_46=0x1032 +xgxs_rx_lane_map_46=0x1302 + +#WC12 +xgxs_tx_lane_map_50=0x3201 +xgxs_rx_lane_map_50=0x0213 + + +#WC13 +xgxs_tx_lane_map_54=0x2301 +xgxs_rx_lane_map_54=0x2310 + +#WC14 +xgxs_tx_lane_map_58=0x3201 +xgxs_rx_lane_map_58=0x0213 + +#WC15 +xgxs_tx_lane_map_62=0x1302 +xgxs_rx_lane_map_62=0x2310 + +#WC20 +xgxs_tx_lane_map_84=0x0213 +xgxs_rx_lane_map_84=0x2301 + +#WC21 +xgxs_tx_lane_map_88=0x0132 +xgxs_rx_lane_map_88=0x3210 + +#WC22 +xgxs_tx_lane_map_92=0x0132 +xgxs_rx_lane_map_92=0x2031 + +#WC23 +xgxs_tx_lane_map_96=0x2031 +xgxs_rx_lane_map_96=0x3201 + +#WC24 +xgxs_tx_lane_map_102=0x0132 +xgxs_rx_lane_map_102=0x2301 + +#WC25 +xgxs_tx_lane_map_106=0x0132 +xgxs_rx_lane_map_106=0x3201 + +#WC26 +xgxs_tx_lane_map_110=0x0132 +xgxs_rx_lane_map_110=0x2031 + +#WC27 +xgxs_tx_lane_map_114=0x2031 +xgxs_rx_lane_map_114=0x2301 + + +#WC0 +xgxs_tx_lane_map_1=0x3210 +xgxs_rx_lane_map_1=0x3120 + +#WC1 +xgxs_tx_lane_map_5=0x0132 +xgxs_rx_lane_map_5=0x1023 + +#WC2 +xgxs_tx_lane_map_9=0x3201 +xgxs_rx_lane_map_9=0x3120 + +#WC3 +xgxs_tx_lane_map_13=0x2031 +xgxs_rx_lane_map_13=0x1032 + +#WC4 +xgxs_tx_lane_map_17=0x2310 +xgxs_rx_lane_map_17=0x3210 + +#WC5 +xgxs_tx_lane_map_21=0x2301 +xgxs_rx_lane_map_21=0x3120 + +#WC6 +xgxs_tx_lane_map_25=0x3201 +xgxs_rx_lane_map_25=0x0213 + +#WC7 +xgxs_tx_lane_map_29=0x1302 +xgxs_rx_lane_map_29=0x1023 + +#WC28 +xgxs_tx_lane_map_118=0x1320 +xgxs_rx_lane_map_118=0x1302 + +#WC29 +xgxs_tx_lane_map_122=0x1032 +xgxs_rx_lane_map_122=0x1023 + +#WC30 +xgxs_tx_lane_map_126=0x3120 +xgxs_rx_lane_map_126=0x3120 + +#WC31 +xgxs_tx_lane_map_130=0x1302 +xgxs_rx_lane_map_130=0x2310 + +#PN + +#WC16 +phy_xaui_tx_polarity_flip_68=0x0000 +phy_xaui_rx_polarity_flip_68=0x0000 + +#WC17 +phy_xaui_tx_polarity_flip_72=0x000D +phy_xaui_rx_polarity_flip_72=0x0002 + + +#WC18 +phy_xaui_tx_polarity_flip_76=0x000F +phy_xaui_rx_polarity_flip_76=0x0000 + +#WC19 +phy_xaui_tx_polarity_flip_80=0x000F +phy_xaui_rx_polarity_flip_80=0x000F + + +#WC8 +phy_xaui_tx_polarity_flip_34=0x000E +phy_xaui_rx_polarity_flip_34=0x0000 + +#WC9 +phy_xaui_tx_polarity_flip_38=0x0008 +phy_xaui_rx_polarity_flip_38=0x0000 + +#WC10 +phy_xaui_tx_polarity_flip_42=0x000D +phy_xaui_rx_polarity_flip_42=0x0000 + +#WC11 +phy_xaui_tx_polarity_flip_46=0x0000 +phy_xaui_rx_polarity_flip_46=0x0000 + + +#WC12 +phy_xaui_tx_polarity_flip_50=0x0002 +phy_xaui_rx_polarity_flip_50=0x0000 + +#WC13 +phy_xaui_tx_polarity_flip_54=0x0002 +phy_xaui_rx_polarity_flip_54=0x0000 + +#WC14 +phy_xaui_tx_polarity_flip_58=0x0000 +phy_xaui_rx_polarity_flip_58=0x0000 + +#WC15 +phy_xaui_tx_polarity_flip_62=0x000A +phy_xaui_rx_polarity_flip_62=0x000F + + +#WC20 + phy_xaui_tx_polarity_flip_84=0x0007 + phy_xaui_rx_polarity_flip_84=0x000E + +#WC21 +phy_xaui_tx_polarity_flip_88=0x000D +phy_xaui_rx_polarity_flip_88=0x000D + +#WC22 +phy_xaui_tx_polarity_flip_92=0x000F +phy_xaui_rx_polarity_flip_92=0x0008 + +#WC23 +phy_xaui_tx_polarity_flip_96=0x0005 +phy_xaui_rx_polarity_flip_96=0x0000 + +#WC24 +phy_xaui_tx_polarity_flip_102=0x0000 +phy_xaui_rx_polarity_flip_102=0x000F + +#WC25 +phy_xaui_tx_polarity_flip_106=0x000F +phy_xaui_rx_polarity_flip_106=0x0000 + +#WC26 +phy_xaui_tx_polarity_flip_110=0x000F +phy_xaui_rx_polarity_flip_110=0x000F + +#WC27 +phy_xaui_tx_polarity_flip_114=0x000F +phy_xaui_rx_polarity_flip_114=0x0007 + +#WC0 +phy_xaui_tx_polarity_flip_1=0x0003 +phy_xaui_rx_polarity_flip_1=0x000F + +#WC1 +phy_xaui_tx_polarity_flip_5=0x0007 +phy_xaui_rx_polarity_flip_5=0x0000 + +#WC2 +phy_xaui_tx_polarity_flip_9=0x0002 +phy_xaui_rx_polarity_flip_9=0x0008 + +#WC3 +phy_xaui_tx_polarity_flip_13=0x000F +phy_xaui_rx_polarity_flip_13=0x0000 + +#WC4 +phy_xaui_tx_polarity_flip_17=0x0007 +phy_xaui_rx_polarity_flip_17=0x0000 + +#WC5 +phy_xaui_tx_polarity_flip_21=0x0000 +phy_xaui_rx_polarity_flip_21=0x0000 + +#WC6 +phy_xaui_tx_polarity_flip_25=0x0002 +phy_xaui_rx_polarity_flip_25=0x0005 + +#WC7 +phy_xaui_tx_polarity_flip_29=0x0002 +phy_xaui_rx_polarity_flip_29=0x0000 + +#WC28 +phy_xaui_tx_polarity_flip_118=0x000F +phy_xaui_rx_polarity_flip_118=0x000F + +#WC29 +phy_xaui_tx_polarity_flip_122=0x0004 +phy_xaui_rx_polarity_flip_122=0x0000 + +#WC30 +phy_xaui_tx_polarity_flip_126=0x000F +phy_xaui_rx_polarity_flip_126=0x0000 + +#WC31 +phy_xaui_tx_polarity_flip_130=0x0006 +phy_xaui_rx_polarity_flip_130=0x0000 diff --git a/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/sai.profile b/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/sai.profile index 7ee11c46566e..52e2e289af60 100644 --- a/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/sai.profile +++ b/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/sai.profile @@ -1,2 +1,2 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/td2-s6000-32x40G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/td2-s6000-32x40G.config.bcm SAI_NUM_ECMP_MEMBERS=32 diff --git a/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/td2-s6000-32x40G.config.bcm b/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/td2-s6000-32x40G.config.bcm new file mode 100644 index 000000000000..9ab9c29a32bc --- /dev/null +++ b/device/dell/x86_64-dell_s6000_s1220-r0/Force10-S6000/td2-s6000-32x40G.config.bcm @@ -0,0 +1,647 @@ +# Old LPM only configuration +# l2_mem_entries=163840 +# l3_mem_entries=90112 +# l3_alpm_enable=0 +# ipv6_lpm_128b_enable=0 +# +# ALPM enable +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +l2_mem_entries=32768 +l3_mem_entries=16384 + +# From old config file +os=unix +higig2_hdr_mode=1 + +# Parity +parity_correction=1 +parity_enable=1 +stat_if_parity_enable=0 + +# +bcm_num_cos=8 +bcm_stat_interval=2000000 +l2xmsg_hostbuf_size=8192 +l2xmsg_mode=1 +lls_num_l2uc=12 +max_vp_lags=0 +miim_intr_enable=0 +mmu_lossless=0 +module_64ports=0 +scache_filename=/tmp/scache +schan_intr_enable=0 +stable_size=0x2000000 +tdma_timeout_usec=5000000 + +pbmp_oversubscribe=0x000007fffffffffffffffffffffffffe +pbmp_xport_xe=0x000007fffffffffffffffffffffffffe + +# Ports configuration +# xe0 (40G) +portmap_1=29:40 +xgxs_rx_lane_map_1=0x213 +xgxs_tx_lane_map_1=0x213 +phy_xaui_rx_polarity_flip_1=0xc +phy_xaui_tx_polarity_flip_1=0x9 +serdes_driver_current_lane0_xe0=0x6 +serdes_driver_current_lane1_xe0=0x7 +serdes_driver_current_lane2_xe0=0x6 +serdes_driver_current_lane3_xe0=0x6 +serdes_pre_driver_current_lane0_xe0=0x6 +serdes_pre_driver_current_lane1_xe0=0x7 +serdes_pre_driver_current_lane2_xe0=0x6 +serdes_pre_driver_current_lane3_xe0=0x6 +serdes_preemphasis_lane0_xe0=0xc2f0 +serdes_preemphasis_lane1_xe0=0xd2b0 +serdes_preemphasis_lane2_xe0=0xc6e0 +serdes_preemphasis_lane3_xe0=0xc2f0 + +# xe1 (40G) +portmap_2=25:40 +xgxs_rx_lane_map_2=0x213 +xgxs_tx_lane_map_2=0x2031 +phy_xaui_rx_polarity_flip_2=0xe +phy_xaui_tx_polarity_flip_2=0x2 +serdes_driver_current_lane0_xe1=0x5 +serdes_driver_current_lane1_xe1=0x5 +serdes_driver_current_lane2_xe1=0x5 +serdes_driver_current_lane3_xe1=0x5 +serdes_pre_driver_current_lane0_xe1=0x5 +serdes_pre_driver_current_lane1_xe1=0x5 +serdes_pre_driver_current_lane2_xe1=0x5 +serdes_pre_driver_current_lane3_xe1=0x5 +serdes_preemphasis_lane0_xe1=0xcad0 +serdes_preemphasis_lane1_xe1=0xc6e0 +serdes_preemphasis_lane2_xe1=0xc6e0 +serdes_preemphasis_lane3_xe1=0xd2b0 + +# xe2 (40G) +portmap_3=37:40 +xgxs_rx_lane_map_3=0x213 +xgxs_tx_lane_map_3=0x1203 +phy_xaui_rx_polarity_flip_3=0x3 +phy_xaui_tx_polarity_flip_3=0xe +serdes_driver_current_lane0_xe2=0x4 +serdes_driver_current_lane1_xe2=0x4 +serdes_driver_current_lane2_xe2=0x4 +serdes_driver_current_lane3_xe2=0x4 +serdes_pre_driver_current_lane0_xe2=0x4 +serdes_pre_driver_current_lane1_xe2=0x4 +serdes_pre_driver_current_lane2_xe2=0x4 +serdes_pre_driver_current_lane3_xe2=0x4 +serdes_preemphasis_lane0_xe2=0xcad0 +serdes_preemphasis_lane1_xe2=0xcad0 +serdes_preemphasis_lane2_xe2=0xc2f0 +serdes_preemphasis_lane3_xe2=0xc2f0 + +# xe3 (40G) +portmap_4=33:40 +xgxs_rx_lane_map_4=0x213 +xgxs_tx_lane_map_4=0x132 +phy_xaui_rx_polarity_flip_4=0xe +phy_xaui_tx_polarity_flip_4=0x2 +serdes_driver_current_lane0_xe3=0x4 +serdes_driver_current_lane1_xe3=0x4 +serdes_driver_current_lane2_xe3=0x4 +serdes_driver_current_lane3_xe3=0x4 +serdes_pre_driver_current_lane0_xe3=0x4 +serdes_pre_driver_current_lane1_xe3=0x4 +serdes_pre_driver_current_lane2_xe3=0x4 +serdes_pre_driver_current_lane3_xe3=0x4 +serdes_preemphasis_lane0_xe3=0xc6e0 +serdes_preemphasis_lane1_xe3=0xc6e0 +serdes_preemphasis_lane2_xe3=0xc6e0 +serdes_preemphasis_lane3_xe3=0xc6e0 + +# xe4 (40G) +portmap_5=41:40 +xgxs_rx_lane_map_5=0x213 +xgxs_tx_lane_map_5=0x3021 +phy_xaui_rx_polarity_flip_5=0x3 +phy_xaui_tx_polarity_flip_5=0xb +serdes_driver_current_lane0_xe4=0x4 +serdes_driver_current_lane1_xe4=0x4 +serdes_driver_current_lane2_xe4=0x4 +serdes_driver_current_lane3_xe4=0x4 +serdes_pre_driver_current_lane0_xe4=0x4 +serdes_pre_driver_current_lane1_xe4=0x4 +serdes_pre_driver_current_lane2_xe4=0x4 +serdes_pre_driver_current_lane3_xe4=0x4 +serdes_preemphasis_lane0_xe4=0xc6e0 +serdes_preemphasis_lane1_xe4=0xc2f0 +serdes_preemphasis_lane2_xe4=0xc2f0 +serdes_preemphasis_lane3_xe4=0xcad0 + +# xe5 (40G) +portmap_6=45:40 +xgxs_rx_lane_map_6=0x213 +xgxs_tx_lane_map_6=0x213 +phy_xaui_rx_polarity_flip_6=0xe +phy_xaui_tx_polarity_flip_6=0x8 +serdes_driver_current_lane0_xe5=0x4 +serdes_driver_current_lane1_xe5=0x4 +serdes_driver_current_lane2_xe5=0x4 +serdes_driver_current_lane3_xe5=0x4 +serdes_pre_driver_current_lane0_xe5=0x4 +serdes_pre_driver_current_lane1_xe5=0x4 +serdes_pre_driver_current_lane2_xe5=0x4 +serdes_pre_driver_current_lane3_xe5=0x4 +serdes_preemphasis_lane0_xe5=0xc2f0 +serdes_preemphasis_lane1_xe5=0xc2f0 +serdes_preemphasis_lane2_xe5=0xc2f0 +serdes_preemphasis_lane3_xe5=0xc2f0 + +# xe6 (40G) +portmap_7=5:40 +xgxs_rx_lane_map_7=0x213 +xgxs_tx_lane_map_7=0x1203 +phy_xaui_rx_polarity_flip_7=0xc +phy_xaui_tx_polarity_flip_7=0x1 +serdes_driver_current_lane0_xe6=0x4 +serdes_driver_current_lane1_xe6=0x4 +serdes_driver_current_lane2_xe6=0x4 +serdes_driver_current_lane3_xe6=0x4 +serdes_pre_driver_current_lane0_xe6=0x4 +serdes_pre_driver_current_lane1_xe6=0x4 +serdes_pre_driver_current_lane2_xe6=0x4 +serdes_pre_driver_current_lane3_xe6=0x4 +serdes_preemphasis_lane0_xe6=0xc6e0 +serdes_preemphasis_lane1_xe6=0xc6e0 +serdes_preemphasis_lane2_xe6=0xc6e0 +serdes_preemphasis_lane3_xe6=0xc6e0 + +# xe7 (40G) +portmap_8=1:40 +xgxs_rx_lane_map_8=0x213 +xgxs_tx_lane_map_8=0x2031 +phy_xaui_rx_polarity_flip_8=0xe +phy_xaui_tx_polarity_flip_8=0xd +serdes_driver_current_lane0_xe7=0x5 +serdes_driver_current_lane1_xe7=0x5 +serdes_driver_current_lane2_xe7=0x5 +serdes_driver_current_lane3_xe7=0x5 +serdes_pre_driver_current_lane0_xe7=0x5 +serdes_pre_driver_current_lane1_xe7=0x5 +serdes_pre_driver_current_lane2_xe7=0x5 +serdes_pre_driver_current_lane3_xe7=0x5 +serdes_preemphasis_lane0_xe7=0xc6e0 +serdes_preemphasis_lane1_xe7=0xcad0 +serdes_preemphasis_lane2_xe7=0xc6e0 +serdes_preemphasis_lane3_xe7=0xcad0 + +# xe9 (40G) +portmap_9=9:40 +xgxs_rx_lane_map_9=0x3120 +xgxs_tx_lane_map_9=0x3021 +phy_xaui_rx_polarity_flip_9=0x0 +phy_xaui_tx_polarity_flip_9=0x4 +serdes_driver_current_lane0_xe8=0x3 +serdes_driver_current_lane1_xe8=0x3 +serdes_driver_current_lane2_xe8=0x3 +serdes_driver_current_lane3_xe8=0x3 +serdes_pre_driver_current_lane0_xe8=0x3 +serdes_pre_driver_current_lane1_xe8=0x3 +serdes_pre_driver_current_lane2_xe8=0x3 +serdes_pre_driver_current_lane3_xe8=0x3 +serdes_preemphasis_lane0_xe8=0xc2f0 +serdes_preemphasis_lane1_xe8=0xc6e0 +serdes_preemphasis_lane2_xe8=0xbf00 +serdes_preemphasis_lane3_xe8=0xc2f0 + +# xe9 (40G) +portmap_10=13:40 +xgxs_rx_lane_map_10=0x213 +xgxs_tx_lane_map_10=0x132 +phy_xaui_rx_polarity_flip_10=0xe +phy_xaui_tx_polarity_flip_10=0x0 +serdes_driver_current_lane0_xe9=0x2 +serdes_driver_current_lane1_xe9=0x3 +serdes_driver_current_lane2_xe9=0x2 +serdes_driver_current_lane3_xe9=0x2 +serdes_pre_driver_current_lane0_xe9=0x2 +serdes_pre_driver_current_lane1_xe9=0x3 +serdes_pre_driver_current_lane2_xe9=0x2 +serdes_pre_driver_current_lane3_xe9=0x2 +serdes_preemphasis_lane0_xe9=0xb270 +serdes_preemphasis_lane1_xe9=0xbb10 +serdes_preemphasis_lane2_xe9=0xb720 +serdes_preemphasis_lane3_xe9=0xb720 + +# xe10 (40G) +portmap_11=21:40 +xgxs_rx_lane_map_11=0x123 +xgxs_tx_lane_map_11=0x1203 +phy_xaui_rx_polarity_flip_11=0xc +phy_xaui_tx_polarity_flip_11=0xe +serdes_driver_current_lane0_xe10=0x2 +serdes_driver_current_lane1_xe10=0x2 +serdes_driver_current_lane2_xe10=0x2 +serdes_driver_current_lane3_xe10=0x2 +serdes_pre_driver_current_lane0_xe10=0x2 +serdes_pre_driver_current_lane1_xe10=0x2 +serdes_pre_driver_current_lane2_xe10=0x2 +serdes_pre_driver_current_lane3_xe10=0x2 +serdes_preemphasis_lane0_xe10=0xb330 +serdes_preemphasis_lane1_xe10=0xb330 +serdes_preemphasis_lane2_xe10=0xb330 +serdes_preemphasis_lane3_xe10=0xb330 + +# xe11 (40G) +portmap_12=17:40 +xgxs_rx_lane_map_12=0x213 +xgxs_tx_lane_map_12=0x132 +phy_xaui_rx_polarity_flip_12=0xe +phy_xaui_tx_polarity_flip_12=0x0 +serdes_driver_current_lane0_xe11=0x2 +serdes_driver_current_lane1_xe11=0x2 +serdes_driver_current_lane2_xe11=0x2 +serdes_driver_current_lane3_xe11=0x2 +serdes_pre_driver_current_lane0_xe11=0x2 +serdes_pre_driver_current_lane1_xe11=0x2 +serdes_pre_driver_current_lane2_xe11=0x2 +serdes_pre_driver_current_lane3_xe11=0x2 +serdes_preemphasis_lane0_xe11=0xb330 +serdes_preemphasis_lane1_xe11=0xbb10 +serdes_preemphasis_lane2_xe11=0xbb10 +serdes_preemphasis_lane3_xe11=0xbb10 + +# xe12 (40G) +portmap_13=49:40 +xgxs_rx_lane_map_13=0x1302 +xgxs_tx_lane_map_13=0x2031 +phy_xaui_rx_polarity_flip_13=0xb +phy_xaui_tx_polarity_flip_13=0x3 +serdes_driver_current_lane0_xe12=0x2 +serdes_driver_current_lane1_xe12=0x2 +serdes_driver_current_lane2_xe12=0x2 +serdes_driver_current_lane3_xe12=0x2 +serdes_pre_driver_current_lane0_xe12=0x2 +serdes_pre_driver_current_lane1_xe12=0x2 +serdes_pre_driver_current_lane2_xe12=0x2 +serdes_pre_driver_current_lane3_xe12=0x2 +serdes_preemphasis_lane0_xe12=0xa760 +serdes_preemphasis_lane1_xe12=0xa760 +serdes_preemphasis_lane2_xe12=0xa760 +serdes_preemphasis_lane3_xe12=0xa760 + +# xe13 (40G) +portmap_14=53:40 +xgxs_rx_lane_map_14=0x213 +xgxs_tx_lane_map_14=0x231 +phy_xaui_rx_polarity_flip_14=0x1 +phy_xaui_tx_polarity_flip_14=0x0 +serdes_driver_current_lane0_xe13=0x2 +serdes_driver_current_lane1_xe13=0x2 +serdes_driver_current_lane2_xe13=0x2 +serdes_driver_current_lane3_xe13=0x2 +serdes_pre_driver_current_lane0_xe13=0x2 +serdes_pre_driver_current_lane1_xe13=0x2 +serdes_pre_driver_current_lane2_xe13=0x2 +serdes_pre_driver_current_lane3_xe13=0x2 +serdes_preemphasis_lane0_xe13=0xaf40 +serdes_preemphasis_lane1_xe13=0xaf40 +serdes_preemphasis_lane2_xe13=0xaf40 +serdes_preemphasis_lane3_xe13=0xaf40 + +# xe14 (40G) +portmap_15=61:40 +xgxs_rx_lane_map_15=0x132 +xgxs_tx_lane_map_15=0x213 +phy_xaui_rx_polarity_flip_15=0x0 +phy_xaui_tx_polarity_flip_15=0x0 +serdes_driver_current_lane0_xe14=0x2 +serdes_driver_current_lane1_xe14=0x2 +serdes_driver_current_lane2_xe14=0x2 +serdes_driver_current_lane3_xe14=0x2 +serdes_pre_driver_current_lane0_xe14=0x2 +serdes_pre_driver_current_lane1_xe14=0x2 +serdes_pre_driver_current_lane2_xe14=0x2 +serdes_pre_driver_current_lane3_xe14=0x2 +serdes_preemphasis_lane0_xe14=0xa760 +serdes_preemphasis_lane1_xe14=0xa760 +serdes_preemphasis_lane2_xe14=0xa760 +serdes_preemphasis_lane3_xe14=0xa760 + +# xe15 (40G) +portmap_16=57:40 +xgxs_rx_lane_map_16=0x213 +xgxs_tx_lane_map_16=0x2031 +phy_xaui_rx_polarity_flip_16=0x1 +phy_xaui_tx_polarity_flip_16=0x0 +serdes_driver_current_lane0_xe15=0x1 +serdes_driver_current_lane1_xe15=0x1 +serdes_driver_current_lane2_xe15=0x1 +serdes_driver_current_lane3_xe15=0x1 +serdes_pre_driver_current_lane0_xe15=0x1 +serdes_pre_driver_current_lane1_xe15=0x1 +serdes_pre_driver_current_lane2_xe15=0x1 +serdes_pre_driver_current_lane3_xe15=0x1 +serdes_preemphasis_lane0_xe15=0xa760 +serdes_preemphasis_lane1_xe15=0xa760 +serdes_preemphasis_lane2_xe15=0xa760 +serdes_preemphasis_lane3_xe15=0xa760 + +# xe16 (40G) +portmap_17=65:40 +xgxs_rx_lane_map_17=0x132 +xgxs_tx_lane_map_17=0x2031 +phy_xaui_rx_polarity_flip_17=0x3 +phy_xaui_tx_polarity_flip_17=0x9 +serdes_driver_current_lane0_xe16=0x1 +serdes_driver_current_lane1_xe16=0x1 +serdes_driver_current_lane2_xe16=0x1 +serdes_driver_current_lane3_xe16=0x1 +serdes_pre_driver_current_lane0_xe16=0x1 +serdes_pre_driver_current_lane1_xe16=0x1 +serdes_pre_driver_current_lane2_xe16=0x1 +serdes_pre_driver_current_lane3_xe16=0x1 +serdes_preemphasis_lane0_xe16=0xa370 +serdes_preemphasis_lane1_xe16=0xa370 +serdes_preemphasis_lane2_xe16=0xa370 +serdes_preemphasis_lane3_xe16=0xa370 + +# xe17 (40G) +portmap_18=69:40 +xgxs_rx_lane_map_18=0x213 +xgxs_tx_lane_map_18=0x2130 +phy_xaui_rx_polarity_flip_18=0x1 +phy_xaui_tx_polarity_flip_18=0xf +serdes_driver_current_lane0_xe17=0x1 +serdes_driver_current_lane1_xe17=0x1 +serdes_driver_current_lane2_xe17=0x1 +serdes_driver_current_lane3_xe17=0x1 +serdes_pre_driver_current_lane0_xe17=0x1 +serdes_pre_driver_current_lane1_xe17=0x1 +serdes_pre_driver_current_lane2_xe17=0x1 +serdes_pre_driver_current_lane3_xe17=0x1 +serdes_preemphasis_lane0_xe17=0xa760 +serdes_preemphasis_lane1_xe17=0xa760 +serdes_preemphasis_lane2_xe17=0xa760 +serdes_preemphasis_lane3_xe17=0xa760 + +# xe19 (40G) +portmap_19=77:40 +xgxs_rx_lane_map_19=0x123 +xgxs_tx_lane_map_19=0x1203 +phy_xaui_rx_polarity_flip_19=0x3 +phy_xaui_tx_polarity_flip_19=0xe +serdes_driver_current_lane0_xe18=0x2 +serdes_driver_current_lane1_xe18=0x2 +serdes_driver_current_lane2_xe18=0x2 +serdes_driver_current_lane3_xe18=0x2 +serdes_pre_driver_current_lane0_xe18=0x2 +serdes_pre_driver_current_lane1_xe18=0x2 +serdes_pre_driver_current_lane2_xe18=0x2 +serdes_pre_driver_current_lane3_xe18=0x2 +serdes_preemphasis_lane0_xe18=0xaf40 +serdes_preemphasis_lane1_xe18=0xaf40 +serdes_preemphasis_lane2_xe18=0xaf40 +serdes_preemphasis_lane3_xe18=0xaf40 + +# xe19 (40G) +portmap_20=73:40 +xgxs_rx_lane_map_20=0x213 +xgxs_tx_lane_map_20=0x2031 +phy_xaui_rx_polarity_flip_20=0x1 +phy_xaui_tx_polarity_flip_20=0x0 +serdes_driver_current_lane0_xe19=0x2 +serdes_driver_current_lane1_xe19=0x2 +serdes_driver_current_lane2_xe19=0x2 +serdes_driver_current_lane3_xe19=0x2 +serdes_pre_driver_current_lane0_xe19=0x2 +serdes_pre_driver_current_lane1_xe19=0x2 +serdes_pre_driver_current_lane2_xe19=0x2 +serdes_pre_driver_current_lane3_xe19=0x2 +serdes_preemphasis_lane0_xe19=0xa760 +serdes_preemphasis_lane1_xe19=0xa760 +serdes_preemphasis_lane2_xe19=0xa760 +serdes_preemphasis_lane3_xe19=0xa760 + +# xe20 (40G) +portmap_21=105:40 +xgxs_rx_lane_map_21=0x1320 +xgxs_tx_lane_map_21=0x3021 +phy_xaui_rx_polarity_flip_21=0xd +phy_xaui_tx_polarity_flip_21=0xb +serdes_driver_current_lane0_xe20=0x1 +serdes_driver_current_lane1_xe20=0x1 +serdes_driver_current_lane2_xe20=0x1 +serdes_driver_current_lane3_xe20=0x1 +serdes_pre_driver_current_lane0_xe20=0x1 +serdes_pre_driver_current_lane1_xe20=0x1 +serdes_pre_driver_current_lane2_xe20=0x1 +serdes_pre_driver_current_lane3_xe20=0x1 +serdes_preemphasis_lane0_xe20=0xb330 +serdes_preemphasis_lane1_xe20=0xb330 +serdes_preemphasis_lane2_xe20=0xb330 +serdes_preemphasis_lane3_xe20=0xb330 + +# xe21 (40G) +portmap_22=109:40 +xgxs_rx_lane_map_22=0x132 +xgxs_tx_lane_map_22=0x132 +phy_xaui_rx_polarity_flip_22=0x8 +phy_xaui_tx_polarity_flip_22=0x0 +serdes_driver_current_lane0_xe21=0x1 +serdes_driver_current_lane1_xe21=0x1 +serdes_driver_current_lane2_xe21=0x1 +serdes_driver_current_lane3_xe21=0x2 +serdes_pre_driver_current_lane0_xe21=0x1 +serdes_pre_driver_current_lane1_xe21=0x1 +serdes_pre_driver_current_lane2_xe21=0x1 +serdes_pre_driver_current_lane3_xe21=0x2 +serdes_preemphasis_lane0_xe21=0xb330 +serdes_preemphasis_lane1_xe21=0xb330 +serdes_preemphasis_lane2_xe21=0xb330 +serdes_preemphasis_lane3_xe21=0xbff0 + +# xe22 (40G) +portmap_23=117:40 +xgxs_rx_lane_map_23=0x231 +xgxs_tx_lane_map_23=0x1203 +phy_xaui_rx_polarity_flip_23=0x3 +phy_xaui_tx_polarity_flip_23=0xe +serdes_driver_current_lane0_xe22=0x3 +serdes_driver_current_lane1_xe22=0x5 +serdes_driver_current_lane2_xe22=0x3 +serdes_driver_current_lane3_xe22=0x3 +serdes_pre_driver_current_lane0_xe22=0x3 +serdes_pre_driver_current_lane1_xe22=0x5 +serdes_pre_driver_current_lane2_xe22=0x3 +serdes_pre_driver_current_lane3_xe22=0x3 +serdes_preemphasis_lane0_xe22=0xc6e0 +serdes_preemphasis_lane1_xe22=0xc6e0 +serdes_preemphasis_lane2_xe22=0xc6e0 +serdes_preemphasis_lane3_xe22=0xc6e0 + +# xe23 (40G) +portmap_24=113:40 +xgxs_rx_lane_map_24=0x132 +xgxs_tx_lane_map_24=0x132 +phy_xaui_rx_polarity_flip_24=0x8 +phy_xaui_tx_polarity_flip_24=0x0 +serdes_driver_current_lane0_xe23=0x1 +serdes_driver_current_lane1_xe23=0x1 +serdes_driver_current_lane2_xe23=0x1 +serdes_driver_current_lane3_xe23=0x1 +serdes_pre_driver_current_lane0_xe23=0x1 +serdes_pre_driver_current_lane1_xe23=0x1 +serdes_pre_driver_current_lane2_xe23=0x1 +serdes_pre_driver_current_lane3_xe23=0x1 +serdes_preemphasis_lane0_xe23=0xbb10 +serdes_preemphasis_lane1_xe23=0xbb10 +serdes_preemphasis_lane2_xe23=0xbb10 +serdes_preemphasis_lane3_xe23=0xc2f0 + +# xe24 (40G) +portmap_25=121:40 +xgxs_rx_lane_map_25=0x1320 +xgxs_tx_lane_map_25=0x3021 +phy_xaui_rx_polarity_flip_25=0xd +phy_xaui_tx_polarity_flip_25=0xb +serdes_driver_current_lane0_xe24=0x4 +serdes_driver_current_lane1_xe24=0x4 +serdes_driver_current_lane2_xe24=0x4 +serdes_driver_current_lane3_xe24=0x4 +serdes_pre_driver_current_lane0_xe24=0x4 +serdes_pre_driver_current_lane1_xe24=0x4 +serdes_pre_driver_current_lane2_xe24=0x4 +serdes_pre_driver_current_lane3_xe24=0x4 +serdes_preemphasis_lane0_xe24=0xc6e0 +serdes_preemphasis_lane1_xe24=0xc6e0 +serdes_preemphasis_lane2_xe24=0xc6e0 +serdes_preemphasis_lane3_xe24=0xc6e0 + +# xe25 (40G) +portmap_26=125:40 +xgxs_rx_lane_map_26=0x132 +xgxs_tx_lane_map_26=0x132 +phy_xaui_rx_polarity_flip_26=0x8 +phy_xaui_tx_polarity_flip_26=0x0 +serdes_driver_current_lane0_xe25=0x4 +serdes_driver_current_lane1_xe25=0x4 +serdes_driver_current_lane2_xe25=0x4 +serdes_driver_current_lane3_xe25=0x4 +serdes_pre_driver_current_lane0_xe25=0x4 +serdes_pre_driver_current_lane1_xe25=0x4 +serdes_pre_driver_current_lane2_xe25=0x4 +serdes_pre_driver_current_lane3_xe25=0x4 +serdes_preemphasis_lane0_xe25=0xc6e0 +serdes_preemphasis_lane1_xe25=0xc6e0 +serdes_preemphasis_lane2_xe25=0xc6e0 +serdes_preemphasis_lane3_xe25=0xcec0 + +# xe26 (40G) +portmap_27=85:40 +xgxs_rx_lane_map_27=0x213 +xgxs_tx_lane_map_27=0x1203 +phy_xaui_rx_polarity_flip_27=0xc +phy_xaui_tx_polarity_flip_27=0xe +serdes_driver_current_lane0_xe26=0x4 +serdes_driver_current_lane1_xe26=0x5 +serdes_driver_current_lane2_xe26=0x4 +serdes_driver_current_lane3_xe26=0x5 +serdes_pre_driver_current_lane0_xe26=0x4 +serdes_pre_driver_current_lane1_xe26=0x5 +serdes_pre_driver_current_lane2_xe26=0x4 +serdes_pre_driver_current_lane3_xe26=0x5 +serdes_preemphasis_lane0_xe26=0xc2f0 +serdes_preemphasis_lane1_xe26=0xc6e0 +serdes_preemphasis_lane2_xe26=0xc6e0 +serdes_preemphasis_lane3_xe26=0xc6e0 + +# xe27 (40G) +portmap_28=81:40 +xgxs_rx_lane_map_28=0x1320 +xgxs_tx_lane_map_28=0x2031 +phy_xaui_rx_polarity_flip_28=0x1 +phy_xaui_tx_polarity_flip_28=0x2 +serdes_driver_current_lane0_xe27=0x2 +serdes_driver_current_lane1_xe27=0x2 +serdes_driver_current_lane2_xe27=0x2 +serdes_driver_current_lane3_xe27=0x2 +serdes_pre_driver_current_lane0_xe27=0x2 +serdes_pre_driver_current_lane1_xe27=0x2 +serdes_pre_driver_current_lane2_xe27=0x2 +serdes_pre_driver_current_lane3_xe27=0x2 +serdes_preemphasis_lane0_xe27=0xbb10 +serdes_preemphasis_lane1_xe27=0xbb10 +serdes_preemphasis_lane2_xe27=0xbf00 +serdes_preemphasis_lane3_xe27=0xbb10 + +# xe29 (40G) +portmap_29=89:40 +xgxs_rx_lane_map_29=0x1320 +xgxs_tx_lane_map_29=0x3021 +phy_xaui_rx_polarity_flip_29=0x2 +phy_xaui_tx_polarity_flip_29=0xb +serdes_driver_current_lane0_xe28=0x4 +serdes_driver_current_lane1_xe28=0x4 +serdes_driver_current_lane2_xe28=0x4 +serdes_driver_current_lane3_xe28=0x4 +serdes_pre_driver_current_lane0_xe28=0x4 +serdes_pre_driver_current_lane1_xe28=0x4 +serdes_pre_driver_current_lane2_xe28=0x4 +serdes_pre_driver_current_lane3_xe28=0x4 +serdes_preemphasis_lane0_xe28=0xcad0 +serdes_preemphasis_lane1_xe28=0xc6e0 +serdes_preemphasis_lane2_xe28=0xc6e0 +serdes_preemphasis_lane3_xe28=0xc6e0 + +# xe29 (40G) +portmap_30=93:40 +xgxs_rx_lane_map_30=0x1320 +xgxs_tx_lane_map_30=0x2031 +phy_xaui_rx_polarity_flip_30=0x1 +phy_xaui_tx_polarity_flip_30=0x2 +serdes_driver_current_lane0_xe29=0x4 +serdes_driver_current_lane1_xe29=0x4 +serdes_driver_current_lane2_xe29=0x4 +serdes_driver_current_lane3_xe29=0x4 +serdes_pre_driver_current_lane0_xe29=0x4 +serdes_pre_driver_current_lane1_xe29=0x4 +serdes_pre_driver_current_lane2_xe29=0x4 +serdes_pre_driver_current_lane3_xe29=0x4 +serdes_preemphasis_lane0_xe29=0xc2f0 +serdes_preemphasis_lane1_xe29=0xc2f0 +serdes_preemphasis_lane2_xe29=0xc2f0 +serdes_preemphasis_lane3_xe29=0xc2f0 + +# xe30 (40G) +portmap_31=97:40 +xgxs_rx_lane_map_31=0x213 +xgxs_tx_lane_map_31=0x2031 +phy_xaui_rx_polarity_flip_31=0xc +phy_xaui_tx_polarity_flip_31=0x3 +serdes_driver_current_lane0_xe30=0x5 +serdes_driver_current_lane1_xe30=0x5 +serdes_driver_current_lane2_xe30=0x5 +serdes_driver_current_lane3_xe30=0x5 +serdes_pre_driver_current_lane0_xe30=0x5 +serdes_pre_driver_current_lane1_xe30=0x5 +serdes_pre_driver_current_lane2_xe30=0x5 +serdes_pre_driver_current_lane3_xe30=0x5 +serdes_preemphasis_lane0_xe30=0xcad0 +serdes_preemphasis_lane1_xe30=0xcad0 +serdes_preemphasis_lane2_xe30=0xcad0 +serdes_preemphasis_lane3_xe30=0xcad0 + +# xe31 (40G) +portmap_32=101:40 +xgxs_rx_lane_map_32=0x1320 +xgxs_tx_lane_map_32=0x1203 +phy_xaui_rx_polarity_flip_32=0x1 +phy_xaui_tx_polarity_flip_32=0x6 +serdes_driver_current_lane0_xe31=0x6 +serdes_driver_current_lane1_xe31=0x6 +serdes_driver_current_lane2_xe31=0x6 +serdes_driver_current_lane3_xe31=0x7 +serdes_pre_driver_current_lane0_xe31=0x6 +serdes_pre_driver_current_lane1_xe31=0x6 +serdes_pre_driver_current_lane2_xe31=0x6 +serdes_pre_driver_current_lane3_xe31=0x7 +serdes_preemphasis_lane0_xe31=0xcec0 +serdes_preemphasis_lane1_xe31=0xcec0 +serdes_preemphasis_lane2_xe31=0xcad0 +serdes_preemphasis_lane3_xe31=0xc6e0 diff --git a/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/sai.profile.j2 b/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/sai.profile.j2 index 92cda77668f6..df3cbb558294 100644 --- a/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/sai.profile.j2 +++ b/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/sai.profile.j2 @@ -2,12 +2,12 @@ {%- if DEVICE_METADATA is defined -%} {%- set switch_role = DEVICE_METADATA['localhost']['type'] -%} {%- if switch_role.lower() == 'torrouter' %} -{% set sai_profile_contents = 'SAI_INIT_CONFIG_FILE=/etc/bcm/th-s6100-64x40G-t0.config.bcm' -%} +{% set sai_profile_contents = 'SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-s6100-64x40G-t0.config.bcm' -%} {%- else %} -{%- set sai_profile_contents = 'SAI_INIT_CONFIG_FILE=/etc/bcm/th-s6100-64x40G-t1.config.bcm' -%} +{%- set sai_profile_contents = 'SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-s6100-64x40G-t1.config.bcm' -%} {%- endif %} {%- else %} -{%- set sai_profile_contents = 'SAI_INIT_CONFIG_FILE=/etc/bcm/th-s6100-64x40G-t1.config.bcm' -%} +{%- set sai_profile_contents = 'SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-s6100-64x40G-t1.config.bcm' -%} {%- endif %} {# Write the contents of sai_ profile_filename to sai.profile file #} {{ sai_profile_contents }} diff --git a/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t0.config.bcm b/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t0.config.bcm new file mode 100644 index 000000000000..5132d448c91d --- /dev/null +++ b/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t0.config.bcm @@ -0,0 +1,415 @@ +#TH S6100 64x40 +l3_alpm_enable=2 +pfc_deadlock_seq_control=1 +bcm_stat_interval=2000000 +bcm_num_cos=8 +switch_bypass_mode=0 +mmu_lossless=0 +lpm_scaling_enable=0 +lpm_ipv6_128b_reserved=0 +ipv6_lpm_128b_enable=1 +l2xmsg_mode=1 +oversubscribe_mode=1 + +phy_gearbox_enable=1 +phy_84752=1 +phy_ext_rom_boot=0 +rate_ext_mdio_divisor=0x80 + +serdes_fiber_pref_xe=0 +serdes_if_type_xe=14 + +fpem_mem_entries=32768 + +os=unix + +parity_correction=1 +parity_enable=1 + +port_phy_addr_66=0x176 +port_phy_addr_100=0x177 +xgxs_tx_lane_map_104=0x3210 +xgxs_rx_lane_map_104=0x0312 +phy_xaui_tx_polarity_flip_104=0x0 +phy_xaui_rx_polarity_flip_104=0x0 +port_phy_addr_104=0x1e +port_phy_addr_105=0x1e +dport_map_port_104=1 +dport_map_port_105=2 +xgxs_tx_lane_map_102=0x1032 +xgxs_rx_lane_map_102=0x0132 +phy_xaui_tx_polarity_flip_102=0x3 +phy_xaui_rx_polarity_flip_102=0x3 +phy_xaui_tx_polarity_flip_103=0x3 +phy_xaui_rx_polarity_flip_103=0x3 +port_phy_addr_102=0x1f +port_phy_addr_103=0x1f +dport_map_port_102=3 +dport_map_port_103=4 +xgxs_tx_lane_map_70=0x0123 +xgxs_rx_lane_map_70=0x3201 +phy_xaui_tx_polarity_flip_70=0x3 +phy_xaui_rx_polarity_flip_70=0x3 +phy_xaui_tx_polarity_flip_71=0x3 +phy_xaui_rx_polarity_flip_71=0x3 +port_phy_addr_70=0xE +port_phy_addr_71=0xE +dport_map_port_70=5 +dport_map_port_71=6 +xgxs_tx_lane_map_68=0x2301 +xgxs_rx_lane_map_68=0x1023 +phy_xaui_tx_polarity_flip_68=0x0 +phy_xaui_rx_polarity_flip_68=0x2 +phy_xaui_tx_polarity_flip_69=0x0 +phy_xaui_rx_polarity_flip_69=0x3 +port_phy_addr_68=0xF +port_phy_addr_69=0xF +dport_map_port_68=7 +dport_map_port_69=8 +xgxs_tx_lane_map_44=0x0123 +xgxs_rx_lane_map_44=0x3201 +phy_xaui_tx_polarity_flip_44=0x3 +phy_xaui_rx_polarity_flip_44=0x3 +phy_xaui_tx_polarity_flip_45=0x3 +phy_xaui_rx_polarity_flip_45=0x3 +port_phy_addr_44=0x3e +port_phy_addr_45=0x3e +dport_map_port_44=9 +dport_map_port_45=10 +xgxs_tx_lane_map_42=0x1032 +xgxs_rx_lane_map_42=0x2310 +phy_xaui_tx_polarity_flip_42=0x0 +phy_xaui_rx_polarity_flip_42=0x0 +phy_xaui_tx_polarity_flip_43=0x3 +phy_xaui_rx_polarity_flip_43=0x0 +port_phy_addr_42=0x3f +port_phy_addr_43=0x3f +dport_map_port_42=11 +dport_map_port_43=12 +xgxs_tx_lane_map_11=0x0123 +xgxs_rx_lane_map_11=0x3201 +phy_xaui_tx_polarity_flip_11=0x3 +phy_xaui_rx_polarity_flip_11=0x0 +phy_xaui_tx_polarity_flip_12=0x3 +phy_xaui_rx_polarity_flip_12=0x0 +port_phy_addr_11=0x2E +port_phy_addr_12=0x2E +dport_map_port_11=13 +dport_map_port_12=14 +xgxs_tx_lane_map_9=0x2310 +xgxs_rx_lane_map_9=0x1023 +phy_xaui_tx_polarity_flip_9=0x0 +phy_xaui_rx_polarity_flip_9=0x0 +phy_xaui_tx_polarity_flip_10=0x0 +phy_xaui_rx_polarity_flip_10=0x0 +port_phy_addr_9=0x2F +port_phy_addr_10=0x2F +dport_map_port_9=15 +dport_map_port_10=16 +xgxs_tx_lane_map_13=0x0123 +xgxs_rx_lane_map_13=0x0132 +phy_xaui_tx_polarity_flip_13=0x3 +phy_xaui_rx_polarity_flip_13=0x3 +phy_xaui_tx_polarity_flip_14=0x3 +phy_xaui_rx_polarity_flip_14=0x3 +port_phy_addr_13=0x11e +port_phy_addr_14=0x11e +dport_map_port_13=17 +dport_map_port_14=18 +xgxs_tx_lane_map_15=0x2301 +xgxs_rx_lane_map_15=0x2310 +phy_xaui_tx_polarity_flip_15=0x0 +phy_xaui_rx_polarity_flip_15=0x0 +port_phy_addr_15=0x11f +port_phy_addr_16=0x11f +dport_map_port_15=19 +dport_map_port_16=20 +xgxs_tx_lane_map_46=0x3210 +xgxs_rx_lane_map_46=0x0132 +phy_xaui_tx_polarity_flip_46=0x3 +phy_xaui_rx_polarity_flip_46=0x3 +phy_xaui_tx_polarity_flip_47=0x3 +phy_xaui_rx_polarity_flip_47=0x3 +port_phy_addr_46=0x10e +port_phy_addr_47=0x10e +dport_map_port_46=21 +dport_map_port_47=22 +xgxs_tx_lane_map_48=0x2301 +xgxs_rx_lane_map_48=0x1023 +phy_xaui_tx_polarity_flip_48=0x0 +phy_xaui_rx_polarity_flip_48=0x1 +port_phy_addr_48=0x10F +port_phy_addr_49=0x10F +dport_map_port_48=23 +dport_map_port_49=24 +xgxs_tx_lane_map_72=0x3210 +xgxs_rx_lane_map_72=0x0132 +phy_xaui_tx_polarity_flip_72=0x3 +phy_xaui_rx_polarity_flip_72=0x0 +phy_xaui_tx_polarity_flip_73=0x3 +phy_xaui_rx_polarity_flip_73=0x0 +port_phy_addr_72=0x13e +port_phy_addr_73=0x13e +dport_map_port_72=25 +dport_map_port_73=26 +xgxs_tx_lane_map_74=0x1320 +xgxs_rx_lane_map_74=0x2013 +phy_xaui_tx_polarity_flip_74=0x0 +phy_xaui_rx_polarity_flip_74=0x0 +phy_xaui_tx_polarity_flip_75=0x3 +phy_xaui_rx_polarity_flip_75=0x0 +port_phy_addr_74=0x13f +port_phy_addr_75=0x13f +dport_map_port_74=27 +dport_map_port_75=28 +xgxs_tx_lane_map_106=0x3210 +xgxs_rx_lane_map_106=0x2310 +phy_xaui_tx_polarity_flip_106=0x0 +phy_xaui_rx_polarity_flip_106=0x3 +phy_xaui_tx_polarity_flip_107=0x0 +phy_xaui_rx_polarity_flip_107=0x3 +port_phy_addr_106=0x12e +port_phy_addr_107=0x12e +dport_map_port_106=29 +dport_map_port_107=30 +xgxs_tx_lane_map_108=0x1032 +xgxs_rx_lane_map_108=0x0132 +phy_xaui_tx_polarity_flip_108=0x3 +phy_xaui_rx_polarity_flip_108=0x3 +phy_xaui_tx_polarity_flip_109=0x3 +phy_xaui_rx_polarity_flip_109=0x3 +port_phy_addr_108=0x12f +port_phy_addr_109=0x12f +dport_map_port_108=31 +dport_map_port_109=32 +port_phy_addr_7=0x5e +port_phy_addr_8=0x5e +xgxs_tx_lane_map_7=0x3210 +xgxs_rx_lane_map_7=0x0132 +phy_xaui_tx_polarity_flip_7=0x3 +phy_xaui_rx_polarity_flip_7=0x1 +phy_xaui_tx_polarity_flip_8=0x3 +phy_xaui_rx_polarity_flip_8=0x3 +dport_map_port_7=33 +dport_map_port_8=34 +port_phy_addr_5=0x5f +port_phy_addr_6=0x5f +xgxs_tx_lane_map_5=0x2301 +xgxs_rx_lane_map_5=0x1023 +phy_xaui_tx_polarity_flip_5=0x0 +phy_xaui_rx_polarity_flip_5=0x0 +phy_xaui_tx_polarity_flip_6=0x0 +phy_xaui_tx_polarity_flip_6=0x0 +dport_map_port_5=35 +dport_map_port_6=36 +port_phy_addr_116=0x4e +port_phy_addr_117=0x4e +phy_xaui_tx_polarity_flip_116=0x0 +phy_xaui_rx_polarity_flip_116=0x1 +phy_xaui_tx_polarity_flip_117=0x3 +phy_xaui_rx_polarity_flip_117=0x3 +xgxs_tx_lane_map_116=0x0123 +xgxs_rx_lane_map_116=0x3201 +dport_map_port_116=37 +dport_map_port_117=38 +port_phy_addr_114=0x4f +port_phy_addr_115=0x4f +phy_xaui_tx_polarity_flip_114=0x0 +phy_xaui_rx_polarity_flip_114=0x0 +phy_xaui_tx_polarity_flip_115=0x1 +phy_xaui_rx_polarity_flip_115=0x0 +xgxs_tx_lane_map_114=0x2301 +xgxs_rx_lane_map_114=0x1023 +dport_map_port_114=39 +dport_map_port_115=40 +port_phy_addr_82=0x7e +port_phy_addr_83=0x7e +xgxs_tx_lane_map_82=0x3210 +xgxs_rx_lane_map_82=0x2310 +phy_xaui_tx_polarity_flip_82=0x0 +phy_xaui_rx_polarity_flip_82=0x0 +dport_map_port_82=41 +dport_map_port_83=42 +port_phy_addr_80=0x7f +port_phy_addr_81=0x7f +xgxs_tx_lane_map_80=0x1032 +xgxs_rx_lane_map_80=0x0132 +phy_xaui_tx_polarity_flip_80=0x3 +phy_xaui_rx_polarity_flip_80=0x3 +phy_xaui_tx_polarity_flip_81=0x0 +phy_xaui_rx_polarity_flip_81=0x3 +dport_map_port_80=43 +dport_map_port_81=44 +xgxs_tx_lane_map_40=0x0123 +xgxs_rx_lane_map_40=0x0132 +port_phy_addr_40=0x6e +port_phy_addr_41=0x6e +phy_xaui_tx_polarity_flip_40=0x3 +phy_xaui_rx_polarity_flip_40=0x0 +phy_xaui_tx_polarity_flip_41=0x3 +phy_xaui_rx_polarity_flip_41=0x0 +dport_map_port_40=45 +dport_map_port_41=46 +port_phy_addr_38=0x6f +port_phy_addr_39=0x6f +phy_xaui_tx_polarity_flip_38=0x0 +phy_xaui_rx_polarity_flip_38=0x0 +xgxs_tx_lane_map_38=0x2301 +xgxs_rx_lane_map_38=0x2310 +dport_map_port_38=47 +dport_map_port_39=48 +xgxs_tx_lane_map_110=0x2013 +xgxs_rx_lane_map_110=0x3102 +phy_xaui_tx_polarity_flip_110=0x3 +phy_xaui_rx_polarity_flip_110=0x3 +phy_xaui_tx_polarity_flip_111=0x3 +phy_xaui_rx_polarity_flip_111=0x3 +port_phy_addr_110=0x15e +port_phy_addr_111=0x15e +dport_map_port_110=49 +dport_map_port_111=50 +xgxs_tx_lane_map_112=0x1032 +xgxs_rx_lane_map_112=0x2310 +phy_xaui_tx_polarity_flip_112=0x3 +phy_xaui_rx_polarity_flip_112=0x3 +phy_xaui_tx_polarity_flip_113=0x3 +phy_xaui_rx_polarity_flip_113=0x3 +port_phy_addr_112=0x15f +port_phy_addr_113=0x15f +dport_map_port_112=51 +dport_map_port_113=52 +port_phy_addr_1=0x14e +port_phy_addr_2=0x14e +xgxs_tx_lane_map_1=0x0123 +xgxs_rx_lane_map_1=0x3201 +phy_xaui_tx_polarity_flip_1=0x3 +phy_xaui_rx_polarity_flip_1=0x3 +phy_xaui_tx_polarity_flip_2=0x3 +phy_xaui_rx_polarity_flip_2=0x3 +dport_map_port_1=53 +dport_map_port_2=54 +xgxs_tx_lane_map_3=0x1023 +xgxs_rx_lane_map_3=0x2310 +port_phy_addr_3=0x14f +port_phy_addr_4=0x14f +phy_xaui_tx_polarity_flip_3=0x3 +phy_xaui_rx_polarity_flip_3=0x0 +phy_xaui_tx_polarity_flip_4=0x3 +phy_xaui_rx_polarity_flip_4=0x3 +dport_map_port_3=55 +dport_map_port_4=56 +port_phy_addr_34=0x17e +port_phy_addr_35=0x17e +xgxs_tx_lane_map_34=0x0123 +xgxs_rx_lane_map_34=0x0132 +phy_xaui_tx_polarity_flip_34=0x3 +phy_xaui_rx_polarity_flip_34=0x0 +phy_xaui_tx_polarity_flip_35=0x3 +phy_xaui_rx_polarity_flip_35=0x0 +dport_map_port_34=57 +dport_map_port_35=58 +port_phy_addr_36=0x17f +port_phy_addr_37=0x17f +xgxs_tx_lane_map_36=0x2301 +xgxs_rx_lane_map_36=0x2310 +phy_xaui_tx_polarity_flip_36=0x0 +phy_xaui_rx_polarity_flip_36=0x3 +phy_xaui_tx_polarity_flip_37=0x3 +phy_xaui_rx_polarity_flip_37=0x3 +dport_map_port_36=59 +dport_map_port_37=60 +port_phy_addr_76=0x16e +port_phy_addr_77=0x16e +xgxs_tx_lane_map_76=0x3210 +xgxs_rx_lane_map_76=0x2310 +phy_xaui_tx_polarity_flip_76=0x0 +phy_xaui_rx_polarity_flip_76=0x3 +phy_xaui_tx_polarity_flip_77=0x0 +phy_xaui_rx_polarity_flip_77=0x3 +dport_map_port_76=61 +dport_map_port_77=62 +port_phy_addr_78=0x16f +port_phy_addr_79=0x16f +xgxs_tx_lane_map_78=0x1032 +xgxs_rx_lane_map_78=0x0132 +phy_xaui_tx_polarity_flip_78=0x3 +phy_xaui_rx_polarity_flip_78=0x3 +phy_xaui_tx_polarity_flip_79=0x3 +phy_xaui_rx_polarity_flip_79=0x3 +dport_map_port_78=63 +dport_map_port_79=64 +pbmp_xport_xe=0x3fffd0000ffff40003fffc0001fffe +portmap_66=129:10 +portmap_100=131:10 +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 +portmap_1=1:40:2 +portmap_2=3:40:2 +portmap_3=5:40:2 +portmap_4=7:40:2 +portmap_5=9:40:2 +portmap_6=11:40:2 +portmap_7=13:40:2 +portmap_8=15:40:2 +portmap_9=17:40:2 +portmap_10=19:40:2 +portmap_11=21:40:2 +portmap_12=23:40:2 +portmap_13=25:40:2 +portmap_14=27:40:2 +portmap_15=29:40:2 +portmap_16=31:40:2 +portmap_34=33:40:2 +portmap_35=35:40:2 +portmap_36=37:40:2 +portmap_37=39:40:2 +portmap_38=41:40:2 +portmap_39=43:40:2 +portmap_40=45:40:2 +portmap_41=47:40:2 +portmap_42=49:40:2 +portmap_43=51:40:2 +portmap_44=53:40:2 +portmap_45=55:40:2 +portmap_46=57:40:2 +portmap_47=59:40:2 +portmap_48=61:40:2 +portmap_49=63:40:2 +portmap_68=65:40:2 +portmap_69=67:40:2 +portmap_70=69:40:2 +portmap_71=71:40:2 +portmap_72=73:40:2 +portmap_73=75:40:2 +portmap_74=77:40:2 +portmap_75=79:40:2 +portmap_76=81:40:2 +portmap_77=83:40:2 +portmap_78=85:40:2 +portmap_79=87:40:2 +portmap_80=89:40:2 +portmap_81=91:40:2 +portmap_82=93:40:2 +portmap_83=95:40:2 +portmap_102=97:40:2 +portmap_103=99:40:2 +portmap_104=101:40:2 +portmap_105=103:40:2 +portmap_106=105:40:2 +portmap_107=107:40:2 +portmap_108=109:40:2 +portmap_109=111:40:2 +portmap_110=113:40:2 +portmap_111=115:40:2 +portmap_112=117:40:2 +portmap_113=119:40:2 +portmap_114=121:40:2 +portmap_115=123:40:2 +portmap_116=125:40:2 +portmap_117=127:40:2 +dport_map_port_66=65 +dport_map_port_100=66 + +mmu_init_config="MSFT-TH-Tier0" diff --git a/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t1.config.bcm b/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t1.config.bcm new file mode 100644 index 000000000000..b6a4e6076a34 --- /dev/null +++ b/device/dell/x86_64-dell_s6100_c2538-r0/Force10-S6100/th-s6100-64x40G-t1.config.bcm @@ -0,0 +1,415 @@ +#TH S6100 64x40 +l3_alpm_enable=2 +pfc_deadlock_seq_control=1 +bcm_stat_interval=2000000 +bcm_num_cos=8 +switch_bypass_mode=0 +mmu_lossless=0 +lpm_scaling_enable=0 +lpm_ipv6_128b_reserved=0 +ipv6_lpm_128b_enable=1 +l2xmsg_mode=1 +oversubscribe_mode=1 + +phy_gearbox_enable=1 +phy_84752=1 +phy_ext_rom_boot=0 +rate_ext_mdio_divisor=0x80 + +serdes_fiber_pref_xe=0 +serdes_if_type_xe=14 + +fpem_mem_entries=32768 + +os=unix + +parity_correction=1 +parity_enable=1 + +port_phy_addr_66=0x176 +port_phy_addr_100=0x177 +xgxs_tx_lane_map_104=0x3210 +xgxs_rx_lane_map_104=0x0312 +phy_xaui_tx_polarity_flip_104=0x0 +phy_xaui_rx_polarity_flip_104=0x0 +port_phy_addr_104=0x1e +port_phy_addr_105=0x1e +dport_map_port_104=1 +dport_map_port_105=2 +xgxs_tx_lane_map_102=0x1032 +xgxs_rx_lane_map_102=0x0132 +phy_xaui_tx_polarity_flip_102=0x3 +phy_xaui_rx_polarity_flip_102=0x3 +phy_xaui_tx_polarity_flip_103=0x3 +phy_xaui_rx_polarity_flip_103=0x3 +port_phy_addr_102=0x1f +port_phy_addr_103=0x1f +dport_map_port_102=3 +dport_map_port_103=4 +xgxs_tx_lane_map_70=0x0123 +xgxs_rx_lane_map_70=0x3201 +phy_xaui_tx_polarity_flip_70=0x3 +phy_xaui_rx_polarity_flip_70=0x3 +phy_xaui_tx_polarity_flip_71=0x3 +phy_xaui_rx_polarity_flip_71=0x3 +port_phy_addr_70=0xE +port_phy_addr_71=0xE +dport_map_port_70=5 +dport_map_port_71=6 +xgxs_tx_lane_map_68=0x2301 +xgxs_rx_lane_map_68=0x1023 +phy_xaui_tx_polarity_flip_68=0x0 +phy_xaui_rx_polarity_flip_68=0x2 +phy_xaui_tx_polarity_flip_69=0x0 +phy_xaui_rx_polarity_flip_69=0x3 +port_phy_addr_68=0xF +port_phy_addr_69=0xF +dport_map_port_68=7 +dport_map_port_69=8 +xgxs_tx_lane_map_44=0x0123 +xgxs_rx_lane_map_44=0x3201 +phy_xaui_tx_polarity_flip_44=0x3 +phy_xaui_rx_polarity_flip_44=0x3 +phy_xaui_tx_polarity_flip_45=0x3 +phy_xaui_rx_polarity_flip_45=0x3 +port_phy_addr_44=0x3e +port_phy_addr_45=0x3e +dport_map_port_44=9 +dport_map_port_45=10 +xgxs_tx_lane_map_42=0x1032 +xgxs_rx_lane_map_42=0x2310 +phy_xaui_tx_polarity_flip_42=0x0 +phy_xaui_rx_polarity_flip_42=0x0 +phy_xaui_tx_polarity_flip_43=0x3 +phy_xaui_rx_polarity_flip_43=0x0 +port_phy_addr_42=0x3f +port_phy_addr_43=0x3f +dport_map_port_42=11 +dport_map_port_43=12 +xgxs_tx_lane_map_11=0x0123 +xgxs_rx_lane_map_11=0x3201 +phy_xaui_tx_polarity_flip_11=0x3 +phy_xaui_rx_polarity_flip_11=0x0 +phy_xaui_tx_polarity_flip_12=0x3 +phy_xaui_rx_polarity_flip_12=0x0 +port_phy_addr_11=0x2E +port_phy_addr_12=0x2E +dport_map_port_11=13 +dport_map_port_12=14 +xgxs_tx_lane_map_9=0x2310 +xgxs_rx_lane_map_9=0x1023 +phy_xaui_tx_polarity_flip_9=0x0 +phy_xaui_rx_polarity_flip_9=0x0 +phy_xaui_tx_polarity_flip_10=0x0 +phy_xaui_rx_polarity_flip_10=0x0 +port_phy_addr_9=0x2F +port_phy_addr_10=0x2F +dport_map_port_9=15 +dport_map_port_10=16 +xgxs_tx_lane_map_13=0x0123 +xgxs_rx_lane_map_13=0x0132 +phy_xaui_tx_polarity_flip_13=0x3 +phy_xaui_rx_polarity_flip_13=0x3 +phy_xaui_tx_polarity_flip_14=0x3 +phy_xaui_rx_polarity_flip_14=0x3 +port_phy_addr_13=0x11e +port_phy_addr_14=0x11e +dport_map_port_13=17 +dport_map_port_14=18 +xgxs_tx_lane_map_15=0x2301 +xgxs_rx_lane_map_15=0x2310 +phy_xaui_tx_polarity_flip_15=0x0 +phy_xaui_rx_polarity_flip_15=0x0 +port_phy_addr_15=0x11f +port_phy_addr_16=0x11f +dport_map_port_15=19 +dport_map_port_16=20 +xgxs_tx_lane_map_46=0x3210 +xgxs_rx_lane_map_46=0x0132 +phy_xaui_tx_polarity_flip_46=0x3 +phy_xaui_rx_polarity_flip_46=0x3 +phy_xaui_tx_polarity_flip_47=0x3 +phy_xaui_rx_polarity_flip_47=0x3 +port_phy_addr_46=0x10e +port_phy_addr_47=0x10e +dport_map_port_46=21 +dport_map_port_47=22 +xgxs_tx_lane_map_48=0x2301 +xgxs_rx_lane_map_48=0x1023 +phy_xaui_tx_polarity_flip_48=0x0 +phy_xaui_rx_polarity_flip_48=0x1 +port_phy_addr_48=0x10F +port_phy_addr_49=0x10F +dport_map_port_48=23 +dport_map_port_49=24 +xgxs_tx_lane_map_72=0x3210 +xgxs_rx_lane_map_72=0x0132 +phy_xaui_tx_polarity_flip_72=0x3 +phy_xaui_rx_polarity_flip_72=0x0 +phy_xaui_tx_polarity_flip_73=0x3 +phy_xaui_rx_polarity_flip_73=0x0 +port_phy_addr_72=0x13e +port_phy_addr_73=0x13e +dport_map_port_72=25 +dport_map_port_73=26 +xgxs_tx_lane_map_74=0x1320 +xgxs_rx_lane_map_74=0x2013 +phy_xaui_tx_polarity_flip_74=0x0 +phy_xaui_rx_polarity_flip_74=0x0 +phy_xaui_tx_polarity_flip_75=0x3 +phy_xaui_rx_polarity_flip_75=0x0 +port_phy_addr_74=0x13f +port_phy_addr_75=0x13f +dport_map_port_74=27 +dport_map_port_75=28 +xgxs_tx_lane_map_106=0x3210 +xgxs_rx_lane_map_106=0x2310 +phy_xaui_tx_polarity_flip_106=0x0 +phy_xaui_rx_polarity_flip_106=0x3 +phy_xaui_tx_polarity_flip_107=0x0 +phy_xaui_rx_polarity_flip_107=0x3 +port_phy_addr_106=0x12e +port_phy_addr_107=0x12e +dport_map_port_106=29 +dport_map_port_107=30 +xgxs_tx_lane_map_108=0x1032 +xgxs_rx_lane_map_108=0x0132 +phy_xaui_tx_polarity_flip_108=0x3 +phy_xaui_rx_polarity_flip_108=0x3 +phy_xaui_tx_polarity_flip_109=0x3 +phy_xaui_rx_polarity_flip_109=0x3 +port_phy_addr_108=0x12f +port_phy_addr_109=0x12f +dport_map_port_108=31 +dport_map_port_109=32 +port_phy_addr_7=0x5e +port_phy_addr_8=0x5e +xgxs_tx_lane_map_7=0x3210 +xgxs_rx_lane_map_7=0x0132 +phy_xaui_tx_polarity_flip_7=0x3 +phy_xaui_rx_polarity_flip_7=0x1 +phy_xaui_tx_polarity_flip_8=0x3 +phy_xaui_rx_polarity_flip_8=0x3 +dport_map_port_7=33 +dport_map_port_8=34 +port_phy_addr_5=0x5f +port_phy_addr_6=0x5f +xgxs_tx_lane_map_5=0x2301 +xgxs_rx_lane_map_5=0x1023 +phy_xaui_tx_polarity_flip_5=0x0 +phy_xaui_rx_polarity_flip_5=0x0 +phy_xaui_tx_polarity_flip_6=0x0 +phy_xaui_tx_polarity_flip_6=0x0 +dport_map_port_5=35 +dport_map_port_6=36 +port_phy_addr_116=0x4e +port_phy_addr_117=0x4e +phy_xaui_tx_polarity_flip_116=0x0 +phy_xaui_rx_polarity_flip_116=0x1 +phy_xaui_tx_polarity_flip_117=0x3 +phy_xaui_rx_polarity_flip_117=0x3 +xgxs_tx_lane_map_116=0x0123 +xgxs_rx_lane_map_116=0x3201 +dport_map_port_116=37 +dport_map_port_117=38 +port_phy_addr_114=0x4f +port_phy_addr_115=0x4f +phy_xaui_tx_polarity_flip_114=0x0 +phy_xaui_rx_polarity_flip_114=0x0 +phy_xaui_tx_polarity_flip_115=0x1 +phy_xaui_rx_polarity_flip_115=0x0 +xgxs_tx_lane_map_114=0x2301 +xgxs_rx_lane_map_114=0x1023 +dport_map_port_114=39 +dport_map_port_115=40 +port_phy_addr_82=0x7e +port_phy_addr_83=0x7e +xgxs_tx_lane_map_82=0x3210 +xgxs_rx_lane_map_82=0x2310 +phy_xaui_tx_polarity_flip_82=0x0 +phy_xaui_rx_polarity_flip_82=0x0 +dport_map_port_82=41 +dport_map_port_83=42 +port_phy_addr_80=0x7f +port_phy_addr_81=0x7f +xgxs_tx_lane_map_80=0x1032 +xgxs_rx_lane_map_80=0x0132 +phy_xaui_tx_polarity_flip_80=0x3 +phy_xaui_rx_polarity_flip_80=0x3 +phy_xaui_tx_polarity_flip_81=0x0 +phy_xaui_rx_polarity_flip_81=0x3 +dport_map_port_80=43 +dport_map_port_81=44 +xgxs_tx_lane_map_40=0x0123 +xgxs_rx_lane_map_40=0x0132 +port_phy_addr_40=0x6e +port_phy_addr_41=0x6e +phy_xaui_tx_polarity_flip_40=0x3 +phy_xaui_rx_polarity_flip_40=0x0 +phy_xaui_tx_polarity_flip_41=0x3 +phy_xaui_rx_polarity_flip_41=0x0 +dport_map_port_40=45 +dport_map_port_41=46 +port_phy_addr_38=0x6f +port_phy_addr_39=0x6f +phy_xaui_tx_polarity_flip_38=0x0 +phy_xaui_rx_polarity_flip_38=0x0 +xgxs_tx_lane_map_38=0x2301 +xgxs_rx_lane_map_38=0x2310 +dport_map_port_38=47 +dport_map_port_39=48 +xgxs_tx_lane_map_110=0x2013 +xgxs_rx_lane_map_110=0x3102 +phy_xaui_tx_polarity_flip_110=0x3 +phy_xaui_rx_polarity_flip_110=0x3 +phy_xaui_tx_polarity_flip_111=0x3 +phy_xaui_rx_polarity_flip_111=0x3 +port_phy_addr_110=0x15e +port_phy_addr_111=0x15e +dport_map_port_110=49 +dport_map_port_111=50 +xgxs_tx_lane_map_112=0x1032 +xgxs_rx_lane_map_112=0x2310 +phy_xaui_tx_polarity_flip_112=0x3 +phy_xaui_rx_polarity_flip_112=0x3 +phy_xaui_tx_polarity_flip_113=0x3 +phy_xaui_rx_polarity_flip_113=0x3 +port_phy_addr_112=0x15f +port_phy_addr_113=0x15f +dport_map_port_112=51 +dport_map_port_113=52 +port_phy_addr_1=0x14e +port_phy_addr_2=0x14e +xgxs_tx_lane_map_1=0x0123 +xgxs_rx_lane_map_1=0x3201 +phy_xaui_tx_polarity_flip_1=0x3 +phy_xaui_rx_polarity_flip_1=0x3 +phy_xaui_tx_polarity_flip_2=0x3 +phy_xaui_rx_polarity_flip_2=0x3 +dport_map_port_1=53 +dport_map_port_2=54 +xgxs_tx_lane_map_3=0x1023 +xgxs_rx_lane_map_3=0x2310 +port_phy_addr_3=0x14f +port_phy_addr_4=0x14f +phy_xaui_tx_polarity_flip_3=0x3 +phy_xaui_rx_polarity_flip_3=0x0 +phy_xaui_tx_polarity_flip_4=0x3 +phy_xaui_rx_polarity_flip_4=0x3 +dport_map_port_3=55 +dport_map_port_4=56 +port_phy_addr_34=0x17e +port_phy_addr_35=0x17e +xgxs_tx_lane_map_34=0x0123 +xgxs_rx_lane_map_34=0x0132 +phy_xaui_tx_polarity_flip_34=0x3 +phy_xaui_rx_polarity_flip_34=0x0 +phy_xaui_tx_polarity_flip_35=0x3 +phy_xaui_rx_polarity_flip_35=0x0 +dport_map_port_34=57 +dport_map_port_35=58 +port_phy_addr_36=0x17f +port_phy_addr_37=0x17f +xgxs_tx_lane_map_36=0x2301 +xgxs_rx_lane_map_36=0x2310 +phy_xaui_tx_polarity_flip_36=0x0 +phy_xaui_rx_polarity_flip_36=0x3 +phy_xaui_tx_polarity_flip_37=0x3 +phy_xaui_rx_polarity_flip_37=0x3 +dport_map_port_36=59 +dport_map_port_37=60 +port_phy_addr_76=0x16e +port_phy_addr_77=0x16e +xgxs_tx_lane_map_76=0x3210 +xgxs_rx_lane_map_76=0x2310 +phy_xaui_tx_polarity_flip_76=0x0 +phy_xaui_rx_polarity_flip_76=0x3 +phy_xaui_tx_polarity_flip_77=0x0 +phy_xaui_rx_polarity_flip_77=0x3 +dport_map_port_76=61 +dport_map_port_77=62 +port_phy_addr_78=0x16f +port_phy_addr_79=0x16f +xgxs_tx_lane_map_78=0x1032 +xgxs_rx_lane_map_78=0x0132 +phy_xaui_tx_polarity_flip_78=0x3 +phy_xaui_rx_polarity_flip_78=0x3 +phy_xaui_tx_polarity_flip_79=0x3 +phy_xaui_rx_polarity_flip_79=0x3 +dport_map_port_78=63 +dport_map_port_79=64 +pbmp_xport_xe=0x3fffd0000ffff40003fffc0001fffe +portmap_66=129:10 +portmap_100=131:10 +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 +portmap_1=1:40:2 +portmap_2=3:40:2 +portmap_3=5:40:2 +portmap_4=7:40:2 +portmap_5=9:40:2 +portmap_6=11:40:2 +portmap_7=13:40:2 +portmap_8=15:40:2 +portmap_9=17:40:2 +portmap_10=19:40:2 +portmap_11=21:40:2 +portmap_12=23:40:2 +portmap_13=25:40:2 +portmap_14=27:40:2 +portmap_15=29:40:2 +portmap_16=31:40:2 +portmap_34=33:40:2 +portmap_35=35:40:2 +portmap_36=37:40:2 +portmap_37=39:40:2 +portmap_38=41:40:2 +portmap_39=43:40:2 +portmap_40=45:40:2 +portmap_41=47:40:2 +portmap_42=49:40:2 +portmap_43=51:40:2 +portmap_44=53:40:2 +portmap_45=55:40:2 +portmap_46=57:40:2 +portmap_47=59:40:2 +portmap_48=61:40:2 +portmap_49=63:40:2 +portmap_68=65:40:2 +portmap_69=67:40:2 +portmap_70=69:40:2 +portmap_71=71:40:2 +portmap_72=73:40:2 +portmap_73=75:40:2 +portmap_74=77:40:2 +portmap_75=79:40:2 +portmap_76=81:40:2 +portmap_77=83:40:2 +portmap_78=85:40:2 +portmap_79=87:40:2 +portmap_80=89:40:2 +portmap_81=91:40:2 +portmap_82=93:40:2 +portmap_83=95:40:2 +portmap_102=97:40:2 +portmap_103=99:40:2 +portmap_104=101:40:2 +portmap_105=103:40:2 +portmap_106=105:40:2 +portmap_107=107:40:2 +portmap_108=109:40:2 +portmap_109=111:40:2 +portmap_110=113:40:2 +portmap_111=115:40:2 +portmap_112=117:40:2 +portmap_113=119:40:2 +portmap_114=121:40:2 +portmap_115=123:40:2 +portmap_116=125:40:2 +portmap_117=127:40:2 +dport_map_port_66=65 +dport_map_port_100=66 + +mmu_init_config="MSFT-TH-Tier1" diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/sai.profile b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/sai.profile index a1755e764616..0a4fed041752 100644 --- a/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/sai.profile +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th2-z9264f-64x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th2-z9264f-64x100G.config.bcm diff --git a/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/th2-z9264f-64x100G.config.bcm b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/th2-z9264f-64x100G.config.bcm new file mode 100644 index 000000000000..5231b526c112 --- /dev/null +++ b/device/dell/x86_64-dellemc_z9264f_c3538-r0/DellEMC-Z9264f/th2-z9264f-64x100G.config.bcm @@ -0,0 +1,1007 @@ +#TH2 Z9264F 64x100G +os=unix +core_clock_frequency=1700 +dpp_clock_ratio=2:3 +pbmp_xport_xe=0x3FFFD0000FFFF40003FFFC0001FFFE +oversubscribe_mode=1 +fpem_mem_entries=65536 +l2xmsg_mode=1 + +l3_alpm_enable=2 +bcm_num_cos=8 +switch_bypass_mode=0 +mmu_lossless=0 +lpm_scaling_enable=0 +lpm_ipv6_128b_reserved=0 +ipv6_lpm_128b_enable=1 + +parity_correction=1 +parity_enable=1 + +scache_filename=/tmp/scache + +dport_map_enable=1 + +dport_map_enable=1 +dport_map_port_13=1 +dport_map_port_14=2 +dport_map_port_34=3 +dport_map_port_35=4 +dport_map_port_38=5 +dport_map_port_39=6 +dport_map_port_42=7 +dport_map_port_43=8 +dport_map_port_1=9 +dport_map_port_2=10 +dport_map_port_5=11 +dport_map_port_6=12 +dport_map_port_9=13 +dport_map_port_10=14 +dport_map_port_46=15 +dport_map_port_47=16 + +dport_map_port_69=17 +dport_map_port_68=18 +dport_map_port_107=19 +dport_map_port_106=20 +dport_map_port_111=21 +dport_map_port_110=22 +dport_map_port_115=23 +dport_map_port_114=24 +dport_map_port_73=25 +dport_map_port_72=26 +dport_map_port_77=27 +dport_map_port_76=28 +dport_map_port_81=29 +dport_map_port_80=30 +dport_map_port_103=31 +dport_map_port_102=32 + +dport_map_port_16=33 +dport_map_port_15=34 +dport_map_port_37=35 +dport_map_port_36=36 +dport_map_port_41=37 +dport_map_port_40=38 +dport_map_port_45=39 +dport_map_port_44=40 +dport_map_port_4=41 +dport_map_port_3=42 +dport_map_port_8=43 +dport_map_port_7=44 +dport_map_port_12=45 +dport_map_port_11=46 +dport_map_port_49=47 +dport_map_port_48=48 + +dport_map_port_70=49 +dport_map_port_71=50 +dport_map_port_108=51 +dport_map_port_109=52 +dport_map_port_112=53 +dport_map_port_113=54 +dport_map_port_116=55 +dport_map_port_117=56 +dport_map_port_74=57 +dport_map_port_75=58 +dport_map_port_78=59 +dport_map_port_79=60 +dport_map_port_82=61 +dport_map_port_83=62 +dport_map_port_104=63 +dport_map_port_105=64 + +# +# Tile-0 FC0~FC15 +# +portmap_1=1:100 +portmap_2=5:100 +portmap_3=9:100 +portmap_4=13:100 +portmap_5=17:100 +portmap_6=21:100 +portmap_7=25:100 +portmap_8=29:100 +portmap_9=33:100 +portmap_10=37:100 +portmap_11=41:100 +portmap_12=45:100 +portmap_13=49:100 +portmap_14=53:100 +portmap_15=57:100 +portmap_16=61:100 + +# TX polarity +phy_chain_tx_polarity_flip_physical{1.0}=0x0 +phy_chain_tx_polarity_flip_physical{2.0}=0x0 +phy_chain_tx_polarity_flip_physical{3.0}=0x1 +phy_chain_tx_polarity_flip_physical{4.0}=0x1 + +phy_chain_tx_polarity_flip_physical{5.0}=0x1 +phy_chain_tx_polarity_flip_physical{6.0}=0x0 +phy_chain_tx_polarity_flip_physical{7.0}=0x1 +phy_chain_tx_polarity_flip_physical{8.0}=0x1 + +phy_chain_tx_polarity_flip_physical{9.0}=0x0 +phy_chain_tx_polarity_flip_physical{10.0}=0x1 +phy_chain_tx_polarity_flip_physical{11.0}=0x0 +phy_chain_tx_polarity_flip_physical{12.0}=0x1 + +phy_chain_tx_polarity_flip_physical{13.0}=0x0 +phy_chain_tx_polarity_flip_physical{14.0}=0x1 +phy_chain_tx_polarity_flip_physical{15.0}=0x0 +phy_chain_tx_polarity_flip_physical{16.0}=0x1 + +phy_chain_tx_polarity_flip_physical{17.0}=0x0 +phy_chain_tx_polarity_flip_physical{18.0}=0x0 +phy_chain_tx_polarity_flip_physical{19.0}=0x1 +phy_chain_tx_polarity_flip_physical{20.0}=0x1 + +phy_chain_tx_polarity_flip_physical{21.0}=0x0 +phy_chain_tx_polarity_flip_physical{22.0}=0x1 +phy_chain_tx_polarity_flip_physical{23.0}=0x0 +phy_chain_tx_polarity_flip_physical{24.0}=0x1 + +phy_chain_tx_polarity_flip_physical{25.0}=0x0 +phy_chain_tx_polarity_flip_physical{26.0}=0x1 +phy_chain_tx_polarity_flip_physical{27.0}=0x1 +phy_chain_tx_polarity_flip_physical{28.0}=0x1 + +phy_chain_tx_polarity_flip_physical{29.0}=0x1 +phy_chain_tx_polarity_flip_physical{30.0}=0x0 +phy_chain_tx_polarity_flip_physical{31.0}=0x0 +phy_chain_tx_polarity_flip_physical{32.0}=0x1 + +phy_chain_tx_polarity_flip_physical{33.0}=0x1 +phy_chain_tx_polarity_flip_physical{34.0}=0x0 +phy_chain_tx_polarity_flip_physical{35.0}=0x1 +phy_chain_tx_polarity_flip_physical{36.0}=0x1 + +phy_chain_tx_polarity_flip_physical{37.0}=0x0 +phy_chain_tx_polarity_flip_physical{38.0}=0x1 +phy_chain_tx_polarity_flip_physical{39.0}=0x0 +phy_chain_tx_polarity_flip_physical{40.0}=0x1 + +phy_chain_tx_polarity_flip_physical{41.0}=0x1 +phy_chain_tx_polarity_flip_physical{42.0}=0x1 +phy_chain_tx_polarity_flip_physical{43.0}=0x0 +phy_chain_tx_polarity_flip_physical{44.0}=0x0 + +phy_chain_tx_polarity_flip_physical{45.0}=0x0 +phy_chain_tx_polarity_flip_physical{46.0}=0x0 +phy_chain_tx_polarity_flip_physical{47.0}=0x0 +phy_chain_tx_polarity_flip_physical{48.0}=0x1 + +phy_chain_tx_polarity_flip_physical{49.0}=0x0 +phy_chain_tx_polarity_flip_physical{50.0}=0x1 +phy_chain_tx_polarity_flip_physical{51.0}=0x0 +phy_chain_tx_polarity_flip_physical{52.0}=0x1 + +phy_chain_tx_polarity_flip_physical{53.0}=0x0 +phy_chain_tx_polarity_flip_physical{54.0}=0x0 +phy_chain_tx_polarity_flip_physical{55.0}=0x1 +phy_chain_tx_polarity_flip_physical{56.0}=0x1 + +phy_chain_tx_polarity_flip_physical{57.0}=0x0 +phy_chain_tx_polarity_flip_physical{58.0}=0x1 +phy_chain_tx_polarity_flip_physical{59.0}=0x0 +phy_chain_tx_polarity_flip_physical{60.0}=0x0 + +phy_chain_tx_polarity_flip_physical{61.0}=0x1 +phy_chain_tx_polarity_flip_physical{62.0}=0x1 +phy_chain_tx_polarity_flip_physical{63.0}=0x0 +phy_chain_tx_polarity_flip_physical{64.0}=0x1 + +# RX polarity +phy_chain_rx_polarity_flip_physical{1.0}=0x0 +phy_chain_rx_polarity_flip_physical{2.0}=0x1 +phy_chain_rx_polarity_flip_physical{3.0}=0x0 +phy_chain_rx_polarity_flip_physical{4.0}=0x1 + +phy_chain_rx_polarity_flip_physical{5.0}=0x1 +phy_chain_rx_polarity_flip_physical{6.0}=0x0 +phy_chain_rx_polarity_flip_physical{7.0}=0x0 +phy_chain_rx_polarity_flip_physical{8.0}=0x0 + +phy_chain_rx_polarity_flip_physical{9.0}=0x0 +phy_chain_rx_polarity_flip_physical{10.0}=0x1 +phy_chain_rx_polarity_flip_physical{11.0}=0x0 +phy_chain_rx_polarity_flip_physical{12.0}=0x0 + +phy_chain_rx_polarity_flip_physical{13.0}=0x0 +phy_chain_rx_polarity_flip_physical{14.0}=0x1 +phy_chain_rx_polarity_flip_physical{15.0}=0x1 +phy_chain_rx_polarity_flip_physical{16.0}=0x0 + +phy_chain_rx_polarity_flip_physical{17.0}=0x0 +phy_chain_rx_polarity_flip_physical{18.0}=0x1 +phy_chain_rx_polarity_flip_physical{19.0}=0x1 +phy_chain_rx_polarity_flip_physical{20.0}=0x0 + +phy_chain_rx_polarity_flip_physical{21.0}=0x1 +phy_chain_rx_polarity_flip_physical{22.0}=0x0 +phy_chain_rx_polarity_flip_physical{23.0}=0x1 +phy_chain_rx_polarity_flip_physical{24.0}=0x0 + +phy_chain_rx_polarity_flip_physical{25.0}=0x1 +phy_chain_rx_polarity_flip_physical{26.0}=0x0 +phy_chain_rx_polarity_flip_physical{27.0}=0x0 +phy_chain_rx_polarity_flip_physical{28.0}=0x1 + +phy_chain_rx_polarity_flip_physical{29.0}=0x1 +phy_chain_rx_polarity_flip_physical{30.0}=0x1 +phy_chain_rx_polarity_flip_physical{31.0}=0x1 +phy_chain_rx_polarity_flip_physical{32.0}=0x0 + +phy_chain_rx_polarity_flip_physical{33.0}=0x0 +phy_chain_rx_polarity_flip_physical{34.0}=0x0 +phy_chain_rx_polarity_flip_physical{35.0}=0x1 +phy_chain_rx_polarity_flip_physical{36.0}=0x1 + +phy_chain_rx_polarity_flip_physical{37.0}=0x1 +phy_chain_rx_polarity_flip_physical{38.0}=0x0 +phy_chain_rx_polarity_flip_physical{39.0}=0x0 +phy_chain_rx_polarity_flip_physical{40.0}=0x1 + +phy_chain_rx_polarity_flip_physical{41.0}=0x0 +phy_chain_rx_polarity_flip_physical{42.0}=0x1 +phy_chain_rx_polarity_flip_physical{43.0}=0x1 +phy_chain_rx_polarity_flip_physical{44.0}=0x0 + +phy_chain_rx_polarity_flip_physical{45.0}=0x1 +phy_chain_rx_polarity_flip_physical{46.0}=0x1 +phy_chain_rx_polarity_flip_physical{47.0}=0x0 +phy_chain_rx_polarity_flip_physical{48.0}=0x1 + +phy_chain_rx_polarity_flip_physical{49.0}=0x1 +phy_chain_rx_polarity_flip_physical{50.0}=0x1 +phy_chain_rx_polarity_flip_physical{51.0}=0x1 +phy_chain_rx_polarity_flip_physical{52.0}=0x0 + +phy_chain_rx_polarity_flip_physical{53.0}=0x1 +phy_chain_rx_polarity_flip_physical{54.0}=0x0 +phy_chain_rx_polarity_flip_physical{55.0}=0x0 +phy_chain_rx_polarity_flip_physical{56.0}=0x1 + +phy_chain_rx_polarity_flip_physical{57.0}=0x0 +phy_chain_rx_polarity_flip_physical{58.0}=0x1 +phy_chain_rx_polarity_flip_physical{59.0}=0x1 +phy_chain_rx_polarity_flip_physical{60.0}=0x0 + +phy_chain_rx_polarity_flip_physical{61.0}=0x1 +phy_chain_rx_polarity_flip_physical{62.0}=0x0 +phy_chain_rx_polarity_flip_physical{63.0}=0x0 +phy_chain_rx_polarity_flip_physical{64.0}=0x1 + +# TX lane swap +phy_chain_tx_lane_map_physical{1.0}=0x3120 +phy_chain_tx_lane_map_physical{5.0}=0x2130 +phy_chain_tx_lane_map_physical{9.0}=0x0213 +phy_chain_tx_lane_map_physical{13.0}=0x3021 + +phy_chain_tx_lane_map_physical{17.0}=0x3201 +phy_chain_tx_lane_map_physical{21.0}=0x3210 +phy_chain_tx_lane_map_physical{25.0}=0x1023 +phy_chain_tx_lane_map_physical{29.0}=0x0231 + +phy_chain_tx_lane_map_physical{33.0}=0x3210 +phy_chain_tx_lane_map_physical{37.0}=0x3120 +phy_chain_tx_lane_map_physical{41.0}=0x2031 +phy_chain_tx_lane_map_physical{45.0}=0x2130 + +phy_chain_tx_lane_map_physical{49.0}=0x2130 +phy_chain_tx_lane_map_physical{53.0}=0x3012 +phy_chain_tx_lane_map_physical{57.0}=0x2031 +phy_chain_tx_lane_map_physical{61.0}=0x0231 + +# RX lane swap +phy_chain_rx_lane_map_physical{1.0}=0x1320 +phy_chain_rx_lane_map_physical{5.0}=0x0213 +phy_chain_rx_lane_map_physical{9.0}=0x2301 +phy_chain_rx_lane_map_physical{13.0}=0x0321 + +phy_chain_rx_lane_map_physical{17.0}=0x2031 +phy_chain_rx_lane_map_physical{21.0}=0x1032 +phy_chain_rx_lane_map_physical{25.0}=0x2310 +phy_chain_rx_lane_map_physical{29.0}=0x2013 + +phy_chain_rx_lane_map_physical{33.0}=0x2103 +phy_chain_rx_lane_map_physical{37.0}=0x0132 +phy_chain_rx_lane_map_physical{41.0}=0x2031 +phy_chain_rx_lane_map_physical{45.0}=0x1032 + +phy_chain_rx_lane_map_physical{49.0}=0x3201 +phy_chain_rx_lane_map_physical{53.0}=0x0132 +phy_chain_rx_lane_map_physical{57.0}=0x2031 +phy_chain_rx_lane_map_physical{61.0}=0x1032 + +# +# Tile-1 FC16~FC31 +# +portmap_34=65:100 +portmap_35=69:100 +portmap_36=73:100 +portmap_37=77:100 +portmap_38=81:100 +portmap_39=85:100 +portmap_40=89:100 +portmap_41=93:100 +portmap_42=97:100 +portmap_43=101:100 +portmap_44=105:100 +portmap_45=109:100 +portmap_46=113:100 +portmap_47=117:100 +portmap_48=121:100 +portmap_49=125:100 + +#TX polarity +phy_chain_tx_polarity_flip_physical{65.0}=0x1 +phy_chain_tx_polarity_flip_physical{66.0}=0x1 +phy_chain_tx_polarity_flip_physical{67.0}=0x0 +phy_chain_tx_polarity_flip_physical{68.0}=0x0 + +phy_chain_tx_polarity_flip_physical{69.0}=0x1 +phy_chain_tx_polarity_flip_physical{70.0}=0x0 +phy_chain_tx_polarity_flip_physical{71.0}=0x1 +phy_chain_tx_polarity_flip_physical{72.0}=0x1 + +phy_chain_tx_polarity_flip_physical{73.0}=0x0 +phy_chain_tx_polarity_flip_physical{74.0}=0x1 +phy_chain_tx_polarity_flip_physical{75.0}=0x1 +phy_chain_tx_polarity_flip_physical{76.0}=0x0 + +phy_chain_tx_polarity_flip_physical{77.0}=0x1 +phy_chain_tx_polarity_flip_physical{78.0}=0x1 +phy_chain_tx_polarity_flip_physical{79.0}=0x1 +phy_chain_tx_polarity_flip_physical{80.0}=0x1 + +phy_chain_tx_polarity_flip_physical{81.0}=0x1 +phy_chain_tx_polarity_flip_physical{82.0}=0x1 +phy_chain_tx_polarity_flip_physical{83.0}=0x0 +phy_chain_tx_polarity_flip_physical{84.0}=0x0 + +phy_chain_tx_polarity_flip_physical{85.0}=0x1 +phy_chain_tx_polarity_flip_physical{86.0}=0x1 +phy_chain_tx_polarity_flip_physical{87.0}=0x0 +phy_chain_tx_polarity_flip_physical{88.0}=0x0 + +phy_chain_tx_polarity_flip_physical{89.0}=0x0 +phy_chain_tx_polarity_flip_physical{90.0}=0x1 +phy_chain_tx_polarity_flip_physical{91.0}=0x1 +phy_chain_tx_polarity_flip_physical{92.0}=0x0 + +phy_chain_tx_polarity_flip_physical{93.0}=0x1 +phy_chain_tx_polarity_flip_physical{94.0}=0x1 +phy_chain_tx_polarity_flip_physical{95.0}=0x1 +phy_chain_tx_polarity_flip_physical{96.0}=0x1 + +phy_chain_tx_polarity_flip_physical{97.0}=0x0 +phy_chain_tx_polarity_flip_physical{98.0}=0x0 +phy_chain_tx_polarity_flip_physical{99.0}=0x0 +phy_chain_tx_polarity_flip_physical{100.0}=0x1 + +phy_chain_tx_polarity_flip_physical{101.0}=0x1 +phy_chain_tx_polarity_flip_physical{102.0}=0x0 +phy_chain_tx_polarity_flip_physical{103.0}=0x1 +phy_chain_tx_polarity_flip_physical{104.0}=0x0 + +phy_chain_tx_polarity_flip_physical{105.0}=0x0 +phy_chain_tx_polarity_flip_physical{106.0}=0x1 +phy_chain_tx_polarity_flip_physical{107.0}=0x0 +phy_chain_tx_polarity_flip_physical{108.0}=0x0 + +phy_chain_tx_polarity_flip_physical{109.0}=0x0 +phy_chain_tx_polarity_flip_physical{110.0}=0x1 +phy_chain_tx_polarity_flip_physical{111.0}=0x0 +phy_chain_tx_polarity_flip_physical{112.0}=0x0 + +phy_chain_tx_polarity_flip_physical{113.0}=0x1 +phy_chain_tx_polarity_flip_physical{114.0}=0x0 +phy_chain_tx_polarity_flip_physical{115.0}=0x0 +phy_chain_tx_polarity_flip_physical{116.0}=0x0 + +phy_chain_tx_polarity_flip_physical{117.0}=0x0 +phy_chain_tx_polarity_flip_physical{118.0}=0x1 +phy_chain_tx_polarity_flip_physical{119.0}=0x0 +phy_chain_tx_polarity_flip_physical{120.0}=0x0 + +phy_chain_tx_polarity_flip_physical{121.0}=0x1 +phy_chain_tx_polarity_flip_physical{122.0}=0x0 +phy_chain_tx_polarity_flip_physical{123.0}=0x1 +phy_chain_tx_polarity_flip_physical{124.0}=0x0 + +phy_chain_tx_polarity_flip_physical{125.0}=0x1 +phy_chain_tx_polarity_flip_physical{126.0}=0x1 +phy_chain_tx_polarity_flip_physical{127.0}=0x1 +phy_chain_tx_polarity_flip_physical{128.0}=0x1 + +#RX polarity +phy_chain_rx_polarity_flip_physical{65.0}=0x0 +phy_chain_rx_polarity_flip_physical{66.0}=0x0 +phy_chain_rx_polarity_flip_physical{67.0}=0x0 +phy_chain_rx_polarity_flip_physical{68.0}=0x1 + +phy_chain_rx_polarity_flip_physical{69.0}=0x0 +phy_chain_rx_polarity_flip_physical{70.0}=0x0 +phy_chain_rx_polarity_flip_physical{71.0}=0x1 +phy_chain_rx_polarity_flip_physical{72.0}=0x0 + +phy_chain_rx_polarity_flip_physical{73.0}=0x0 +phy_chain_rx_polarity_flip_physical{74.0}=0x1 +phy_chain_rx_polarity_flip_physical{75.0}=0x1 +phy_chain_rx_polarity_flip_physical{76.0}=0x0 + +phy_chain_rx_polarity_flip_physical{77.0}=0x1 +phy_chain_rx_polarity_flip_physical{78.0}=0x1 +phy_chain_rx_polarity_flip_physical{79.0}=0x0 +phy_chain_rx_polarity_flip_physical{80.0}=0x1 + +phy_chain_rx_polarity_flip_physical{81.0}=0x0 +phy_chain_rx_polarity_flip_physical{82.0}=0x0 +phy_chain_rx_polarity_flip_physical{83.0}=0x0 +phy_chain_rx_polarity_flip_physical{84.0}=0x1 + +phy_chain_rx_polarity_flip_physical{85.0}=0x0 +phy_chain_rx_polarity_flip_physical{86.0}=0x0 +phy_chain_rx_polarity_flip_physical{87.0}=0x1 +phy_chain_rx_polarity_flip_physical{88.0}=0x0 + +phy_chain_rx_polarity_flip_physical{89.0}=0x0 +phy_chain_rx_polarity_flip_physical{90.0}=0x1 +phy_chain_rx_polarity_flip_physical{91.0}=0x1 +phy_chain_rx_polarity_flip_physical{92.0}=0x0 + +phy_chain_rx_polarity_flip_physical{93.0}=0x0 +phy_chain_rx_polarity_flip_physical{94.0}=0x1 +phy_chain_rx_polarity_flip_physical{95.0}=0x0 +phy_chain_rx_polarity_flip_physical{96.0}=0x0 + +phy_chain_rx_polarity_flip_physical{97.0}=0x0 +phy_chain_rx_polarity_flip_physical{98.0}=0x1 +phy_chain_rx_polarity_flip_physical{99.0}=0x0 +phy_chain_rx_polarity_flip_physical{100.0}=0x1 + +phy_chain_rx_polarity_flip_physical{101.0}=0x0 +phy_chain_rx_polarity_flip_physical{102.0}=0x0 +phy_chain_rx_polarity_flip_physical{103.0}=0x1 +phy_chain_rx_polarity_flip_physical{104.0}=0x1 + +phy_chain_rx_polarity_flip_physical{105.0}=0x1 +phy_chain_rx_polarity_flip_physical{106.0}=0x0 +phy_chain_rx_polarity_flip_physical{107.0}=0x0 +phy_chain_rx_polarity_flip_physical{108.0}=0x1 + +phy_chain_rx_polarity_flip_physical{109.0}=0x0 +phy_chain_rx_polarity_flip_physical{110.0}=0x1 +phy_chain_rx_polarity_flip_physical{111.0}=0x1 +phy_chain_rx_polarity_flip_physical{112.0}=0x1 + +phy_chain_rx_polarity_flip_physical{113.0}=0x0 +phy_chain_rx_polarity_flip_physical{114.0}=0x1 +phy_chain_rx_polarity_flip_physical{115.0}=0x1 +phy_chain_rx_polarity_flip_physical{116.0}=0x0 + +phy_chain_rx_polarity_flip_physical{117.0}=0x1 +phy_chain_rx_polarity_flip_physical{118.0}=0x0 +phy_chain_rx_polarity_flip_physical{119.0}=0x1 +phy_chain_rx_polarity_flip_physical{120.0}=0x0 + +phy_chain_rx_polarity_flip_physical{121.0}=0x1 +phy_chain_rx_polarity_flip_physical{122.0}=0x1 +phy_chain_rx_polarity_flip_physical{123.0}=0x0 +phy_chain_rx_polarity_flip_physical{124.0}=0x0 + +phy_chain_rx_polarity_flip_physical{125.0}=0x0 +phy_chain_rx_polarity_flip_physical{126.0}=0x1 +phy_chain_rx_polarity_flip_physical{127.0}=0x1 +phy_chain_rx_polarity_flip_physical{128.0}=0x0 + +# TX lane swap +phy_chain_tx_lane_map_physical{65.0}=0x2130 +phy_chain_tx_lane_map_physical{69.0}=0x3012 +phy_chain_tx_lane_map_physical{73.0}=0x2031 +phy_chain_tx_lane_map_physical{77.0}=0x0231 + +phy_chain_tx_lane_map_physical{81.0}=0x2130 +phy_chain_tx_lane_map_physical{85.0}=0x1032 +phy_chain_tx_lane_map_physical{89.0}=0x2031 +phy_chain_tx_lane_map_physical{93.0}=0x0231 + +phy_chain_tx_lane_map_physical{97.0}=0x0123 +phy_chain_tx_lane_map_physical{101.0}=0x1320 +phy_chain_tx_lane_map_physical{105.0}=0x2301 +phy_chain_tx_lane_map_physical{109.0}=0x0213 + +phy_chain_tx_lane_map_physical{113.0}=0x0123 +phy_chain_tx_lane_map_physical{117.0}=0x1023 +phy_chain_tx_lane_map_physical{121.0}=0x2130 +phy_chain_tx_lane_map_physical{125.0}=0x1302 + +# RX lane swap +phy_chain_rx_lane_map_physical{65.0}=0x2103 +phy_chain_rx_lane_map_physical{69.0}=0x3210 +phy_chain_rx_lane_map_physical{73.0}=0x2031 +phy_chain_rx_lane_map_physical{77.0}=0x1032 + +phy_chain_rx_lane_map_physical{81.0}=0x2103 +phy_chain_rx_lane_map_physical{85.0}=0x3210 +phy_chain_rx_lane_map_physical{89.0}=0x2031 +phy_chain_rx_lane_map_physical{93.0}=0x1032 + +phy_chain_rx_lane_map_physical{97.0}=0x1023 +phy_chain_rx_lane_map_physical{101.0}=0x3120 +phy_chain_rx_lane_map_physical{105.0}=0x1023 +phy_chain_rx_lane_map_physical{109.0}=0x0231 + +phy_chain_rx_lane_map_physical{113.0}=0x1320 +phy_chain_rx_lane_map_physical{117.0}=0x3102 +phy_chain_rx_lane_map_physical{121.0}=0x0213 +phy_chain_rx_lane_map_physical{125.0}=0x0231 + +# +# Tile-2 FC32~FC47 +# +# port 66 is the first management port +portmap_66=257:10 +# port 67 is the second loopback port +#portmap_67=261:10 +portmap_68=129:100 +portmap_69=133:100 +portmap_70=137:100 +portmap_71=141:100 +portmap_72=145:100 +portmap_73=149:100 +portmap_74=153:100 +portmap_75=157:100 +portmap_76=161:100 +portmap_77=165:100 +portmap_78=169:100 +portmap_79=173:100 +portmap_80=177:100 +portmap_81=181:100 +portmap_82=185:100 +portmap_83=189:100 + +# TX polarity +phy_chain_tx_polarity_flip_physical{129.0}=0x1 +phy_chain_tx_polarity_flip_physical{130.0}=0x0 +phy_chain_tx_polarity_flip_physical{131.0}=0x1 +phy_chain_tx_polarity_flip_physical{132.0}=0x1 + +phy_chain_tx_polarity_flip_physical{133.0}=0x0 +phy_chain_tx_polarity_flip_physical{134.0}=0x0 +phy_chain_tx_polarity_flip_physical{135.0}=0x1 +phy_chain_tx_polarity_flip_physical{136.0}=0x1 + +phy_chain_tx_polarity_flip_physical{137.0}=0x1 +phy_chain_tx_polarity_flip_physical{138.0}=0x0 +phy_chain_tx_polarity_flip_physical{139.0}=0x1 +phy_chain_tx_polarity_flip_physical{140.0}=0x0 + +phy_chain_tx_polarity_flip_physical{141.0}=0x1 +phy_chain_tx_polarity_flip_physical{142.0}=0x0 +phy_chain_tx_polarity_flip_physical{143.0}=0x1 +phy_chain_tx_polarity_flip_physical{144.0}=0x1 + +phy_chain_tx_polarity_flip_physical{145.0}=0x1 +phy_chain_tx_polarity_flip_physical{146.0}=0x0 +phy_chain_tx_polarity_flip_physical{147.0}=0x0 +phy_chain_tx_polarity_flip_physical{148.0}=0x1 + +phy_chain_tx_polarity_flip_physical{149.0}=0x0 +phy_chain_tx_polarity_flip_physical{150.0}=0x1 +phy_chain_tx_polarity_flip_physical{151.0}=0x1 +phy_chain_tx_polarity_flip_physical{152.0}=0x1 + +phy_chain_tx_polarity_flip_physical{153.0}=0x0 +phy_chain_tx_polarity_flip_physical{154.0}=0x1 +phy_chain_tx_polarity_flip_physical{155.0}=0x0 +phy_chain_tx_polarity_flip_physical{156.0}=0x0 + +phy_chain_tx_polarity_flip_physical{157.0}=0x0 +phy_chain_tx_polarity_flip_physical{158.0}=0x0 +phy_chain_tx_polarity_flip_physical{159.0}=0x1 +phy_chain_tx_polarity_flip_physical{160.0}=0x0 + +phy_chain_tx_polarity_flip_physical{161.0}=0x1 +phy_chain_tx_polarity_flip_physical{162.0}=0x0 +phy_chain_tx_polarity_flip_physical{163.0}=0x0 +phy_chain_tx_polarity_flip_physical{164.0}=0x1 + +phy_chain_tx_polarity_flip_physical{165.0}=0x1 +phy_chain_tx_polarity_flip_physical{166.0}=0x0 +phy_chain_tx_polarity_flip_physical{167.0}=0x0 +phy_chain_tx_polarity_flip_physical{168.0}=0x0 + +phy_chain_tx_polarity_flip_physical{169.0}=0x0 +phy_chain_tx_polarity_flip_physical{170.0}=0x0 +phy_chain_tx_polarity_flip_physical{171.0}=0x0 +phy_chain_tx_polarity_flip_physical{172.0}=0x0 + +phy_chain_tx_polarity_flip_physical{173.0}=0x0 +phy_chain_tx_polarity_flip_physical{174.0}=0x1 +phy_chain_tx_polarity_flip_physical{175.0}=0x0 +phy_chain_tx_polarity_flip_physical{176.0}=0x1 + +phy_chain_tx_polarity_flip_physical{177.0}=0x0 +phy_chain_tx_polarity_flip_physical{178.0}=0x0 +phy_chain_tx_polarity_flip_physical{179.0}=0x0 +phy_chain_tx_polarity_flip_physical{180.0}=0x0 + +phy_chain_tx_polarity_flip_physical{181.0}=0x1 +phy_chain_tx_polarity_flip_physical{182.0}=0x0 +phy_chain_tx_polarity_flip_physical{183.0}=0x0 +phy_chain_tx_polarity_flip_physical{184.0}=0x0 + +phy_chain_tx_polarity_flip_physical{185.0}=0x0 +phy_chain_tx_polarity_flip_physical{186.0}=0x0 +phy_chain_tx_polarity_flip_physical{187.0}=0x0 +phy_chain_tx_polarity_flip_physical{188.0}=0x0 + +phy_chain_tx_polarity_flip_physical{189.0}=0x1 +phy_chain_tx_polarity_flip_physical{190.0}=0x0 +phy_chain_tx_polarity_flip_physical{191.0}=0x1 +phy_chain_tx_polarity_flip_physical{192.0}=0x0 + +# RX polarity +phy_chain_rx_polarity_flip_physical{129.0}=0x0 +phy_chain_rx_polarity_flip_physical{130.0}=0x0 +phy_chain_rx_polarity_flip_physical{131.0}=0x1 +phy_chain_rx_polarity_flip_physical{132.0}=0x0 + +phy_chain_rx_polarity_flip_physical{133.0}=0x0 +phy_chain_rx_polarity_flip_physical{134.0}=0x1 +phy_chain_rx_polarity_flip_physical{135.0}=0x1 +phy_chain_rx_polarity_flip_physical{136.0}=0x0 + +phy_chain_rx_polarity_flip_physical{137.0}=0x1 +phy_chain_rx_polarity_flip_physical{138.0}=0x0 +phy_chain_rx_polarity_flip_physical{139.0}=0x1 +phy_chain_rx_polarity_flip_physical{140.0}=0x1 + +phy_chain_rx_polarity_flip_physical{141.0}=0x0 +phy_chain_rx_polarity_flip_physical{142.0}=0x0 +phy_chain_rx_polarity_flip_physical{143.0}=0x1 +phy_chain_rx_polarity_flip_physical{144.0}=0x1 + +phy_chain_rx_polarity_flip_physical{145.0}=0x0 +phy_chain_rx_polarity_flip_physical{146.0}=0x0 +phy_chain_rx_polarity_flip_physical{147.0}=0x1 +phy_chain_rx_polarity_flip_physical{148.0}=0x0 + +phy_chain_rx_polarity_flip_physical{149.0}=0x0 +phy_chain_rx_polarity_flip_physical{150.0}=0x1 +phy_chain_rx_polarity_flip_physical{151.0}=0x1 +phy_chain_rx_polarity_flip_physical{152.0}=0x0 + +phy_chain_rx_polarity_flip_physical{153.0}=0x0 +phy_chain_rx_polarity_flip_physical{154.0}=0x1 +phy_chain_rx_polarity_flip_physical{155.0}=0x0 +phy_chain_rx_polarity_flip_physical{156.0}=0x0 + +phy_chain_rx_polarity_flip_physical{157.0}=0x1 +phy_chain_rx_polarity_flip_physical{158.0}=0x1 +phy_chain_rx_polarity_flip_physical{159.0}=0x0 +phy_chain_rx_polarity_flip_physical{160.0}=0x0 + +phy_chain_rx_polarity_flip_physical{161.0}=0x1 +phy_chain_rx_polarity_flip_physical{162.0}=0x1 +phy_chain_rx_polarity_flip_physical{163.0}=0x0 +phy_chain_rx_polarity_flip_physical{164.0}=0x1 + +phy_chain_rx_polarity_flip_physical{165.0}=0x0 +phy_chain_rx_polarity_flip_physical{166.0}=0x1 +phy_chain_rx_polarity_flip_physical{167.0}=0x1 +phy_chain_rx_polarity_flip_physical{168.0}=0x0 + +phy_chain_rx_polarity_flip_physical{169.0}=0x0 +phy_chain_rx_polarity_flip_physical{170.0}=0x1 +phy_chain_rx_polarity_flip_physical{171.0}=0x0 +phy_chain_rx_polarity_flip_physical{172.0}=0x1 + +phy_chain_rx_polarity_flip_physical{173.0}=0x0 +phy_chain_rx_polarity_flip_physical{174.0}=0x1 +phy_chain_rx_polarity_flip_physical{175.0}=0x0 +phy_chain_rx_polarity_flip_physical{176.0}=0x0 + +phy_chain_rx_polarity_flip_physical{177.0}=0x1 +phy_chain_rx_polarity_flip_physical{178.0}=0x0 +phy_chain_rx_polarity_flip_physical{179.0}=0x0 +phy_chain_rx_polarity_flip_physical{180.0}=0x1 + +phy_chain_rx_polarity_flip_physical{181.0}=0x0 +phy_chain_rx_polarity_flip_physical{182.0}=0x1 +phy_chain_rx_polarity_flip_physical{183.0}=0x0 +phy_chain_rx_polarity_flip_physical{184.0}=0x1 + +phy_chain_rx_polarity_flip_physical{185.0}=0x1 +phy_chain_rx_polarity_flip_physical{186.0}=0x0 +phy_chain_rx_polarity_flip_physical{187.0}=0x1 +phy_chain_rx_polarity_flip_physical{188.0}=0x0 + +phy_chain_rx_polarity_flip_physical{189.0}=0x1 +phy_chain_rx_polarity_flip_physical{190.0}=0x1 +phy_chain_rx_polarity_flip_physical{191.0}=0x0 +phy_chain_rx_polarity_flip_physical{192.0}=0x0 + +# TX lane swap +phy_chain_tx_lane_map_physical{129.0}=0x0312 +phy_chain_tx_lane_map_physical{133.0}=0x3120 +phy_chain_tx_lane_map_physical{137.0}=0x1203 +phy_chain_tx_lane_map_physical{141.0}=0x0132 + +phy_chain_tx_lane_map_physical{145.0}=0x0312 +phy_chain_tx_lane_map_physical{149.0}=0x2310 +phy_chain_tx_lane_map_physical{153.0}=0x1032 +phy_chain_tx_lane_map_physical{157.0}=0x3120 + +phy_chain_tx_lane_map_physical{161.0}=0x1023 +phy_chain_tx_lane_map_physical{165.0}=0x1203 +phy_chain_tx_lane_map_physical{169.0}=0x0213 +phy_chain_tx_lane_map_physical{173.0}=0x0123 + +phy_chain_tx_lane_map_physical{177.0}=0x2031 +phy_chain_tx_lane_map_physical{181.0}=0x1203 +phy_chain_tx_lane_map_physical{185.0}=0x0213 +phy_chain_tx_lane_map_physical{189.0}=0x3210 + +# RX lane swap +phy_chain_rx_lane_map_physical{129.0}=0x0321 +phy_chain_rx_lane_map_physical{133.0}=0x0312 +phy_chain_rx_lane_map_physical{137.0}=0x2103 +phy_chain_rx_lane_map_physical{141.0}=0x0231 + +phy_chain_rx_lane_map_physical{145.0}=0x0321 +phy_chain_rx_lane_map_physical{149.0}=0x0312 +phy_chain_rx_lane_map_physical{153.0}=0x3120 +phy_chain_rx_lane_map_physical{157.0}=0x2103 + +phy_chain_rx_lane_map_physical{161.0}=0x1032 +phy_chain_rx_lane_map_physical{165.0}=0x2031 +phy_chain_rx_lane_map_physical{169.0}=0x0132 +phy_chain_rx_lane_map_physical{173.0}=0x2103 + +phy_chain_rx_lane_map_physical{177.0}=0x1032 +phy_chain_rx_lane_map_physical{181.0}=0x1230 +phy_chain_rx_lane_map_physical{185.0}=0x0321 +phy_chain_rx_lane_map_physical{189.0}=0x3201 + +# +# Tile-3 FC48~FC63 +# portmap_0=x:xx // cpu port (not required, but included for illustration purposes) +# +# port 100 is the second management port +portmap_100=259:10 +# port 101 is the third loopback port +#portmap_101=262:10 +portmap_102=193:100 +portmap_103=197:100 +portmap_104=201:100 +portmap_105=205:100 +portmap_106=209:100 +portmap_107=213:100 +portmap_108=217:100 +portmap_109=221:100 +portmap_110=225:100 +portmap_111=229:100 +portmap_112=233:100 +portmap_113=237:100 +portmap_114=241:100 +portmap_115=245:100 +portmap_116=249:100 +portmap_117=253:100 +# port 135 is the fourth loopback port +portmap_135=263:10 + +# TX polarity +phy_chain_tx_polarity_flip_physical{193.0}=0x0 +phy_chain_tx_polarity_flip_physical{194.0}=0x0 +phy_chain_tx_polarity_flip_physical{195.0}=0x0 +phy_chain_tx_polarity_flip_physical{196.0}=0x0 + +phy_chain_tx_polarity_flip_physical{197.0}=0x1 +phy_chain_tx_polarity_flip_physical{198.0}=0x0 +phy_chain_tx_polarity_flip_physical{199.0}=0x1 +phy_chain_tx_polarity_flip_physical{200.0}=0x0 + +phy_chain_tx_polarity_flip_physical{201.0}=0x0 +phy_chain_tx_polarity_flip_physical{202.0}=0x0 +phy_chain_tx_polarity_flip_physical{203.0}=0x0 +phy_chain_tx_polarity_flip_physical{204.0}=0x0 + +phy_chain_tx_polarity_flip_physical{205.0}=0x1 +phy_chain_tx_polarity_flip_physical{206.0}=0x0 +phy_chain_tx_polarity_flip_physical{207.0}=0x1 +phy_chain_tx_polarity_flip_physical{208.0}=0x0 + +phy_chain_tx_polarity_flip_physical{209.0}=0x1 +phy_chain_tx_polarity_flip_physical{210.0}=0x0 +phy_chain_tx_polarity_flip_physical{211.0}=0x0 +phy_chain_tx_polarity_flip_physical{212.0}=0x1 + +phy_chain_tx_polarity_flip_physical{213.0}=0x1 +phy_chain_tx_polarity_flip_physical{214.0}=0x0 +phy_chain_tx_polarity_flip_physical{215.0}=0x0 +phy_chain_tx_polarity_flip_physical{216.0}=0x0 + +phy_chain_tx_polarity_flip_physical{217.0}=0x0 +phy_chain_tx_polarity_flip_physical{218.0}=0x0 +phy_chain_tx_polarity_flip_physical{219.0}=0x0 +phy_chain_tx_polarity_flip_physical{220.0}=0x0 + +phy_chain_tx_polarity_flip_physical{221.0}=0x0 +phy_chain_tx_polarity_flip_physical{222.0}=0x1 +phy_chain_tx_polarity_flip_physical{223.0}=0x1 +phy_chain_tx_polarity_flip_physical{224.0}=0x0 + +phy_chain_tx_polarity_flip_physical{225.0}=0x1 +phy_chain_tx_polarity_flip_physical{226.0}=0x1 +phy_chain_tx_polarity_flip_physical{227.0}=0x0 +phy_chain_tx_polarity_flip_physical{228.0}=0x0 + +phy_chain_tx_polarity_flip_physical{229.0}=0x1 +phy_chain_tx_polarity_flip_physical{230.0}=0x1 +phy_chain_tx_polarity_flip_physical{231.0}=0x1 +phy_chain_tx_polarity_flip_physical{232.0}=0x1 + +phy_chain_tx_polarity_flip_physical{233.0}=0x0 +phy_chain_tx_polarity_flip_physical{234.0}=0x0 +phy_chain_tx_polarity_flip_physical{235.0}=0x1 +phy_chain_tx_polarity_flip_physical{236.0}=0x1 + +phy_chain_tx_polarity_flip_physical{237.0}=0x1 +phy_chain_tx_polarity_flip_physical{238.0}=0x1 +phy_chain_tx_polarity_flip_physical{239.0}=0x0 +phy_chain_tx_polarity_flip_physical{240.0}=0x0 + +phy_chain_tx_polarity_flip_physical{241.0}=0x0 +phy_chain_tx_polarity_flip_physical{242.0}=0x1 +phy_chain_tx_polarity_flip_physical{243.0}=0x0 +phy_chain_tx_polarity_flip_physical{244.0}=0x0 + +phy_chain_tx_polarity_flip_physical{245.0}=0x1 +phy_chain_tx_polarity_flip_physical{246.0}=0x0 +phy_chain_tx_polarity_flip_physical{247.0}=0x0 +phy_chain_tx_polarity_flip_physical{248.0}=0x0 + +phy_chain_tx_polarity_flip_physical{249.0}=0x0 +phy_chain_tx_polarity_flip_physical{250.0}=0x0 +phy_chain_tx_polarity_flip_physical{251.0}=0x0 +phy_chain_tx_polarity_flip_physical{252.0}=0x0 + +phy_chain_tx_polarity_flip_physical{253.0}=0x1 +phy_chain_tx_polarity_flip_physical{254.0}=0x0 +phy_chain_tx_polarity_flip_physical{255.0}=0x0 +phy_chain_tx_polarity_flip_physical{256.0}=0x0 + +# RX polarity +phy_chain_rx_polarity_flip_physical{193.0}=0x1 +phy_chain_rx_polarity_flip_physical{194.0}=0x0 +phy_chain_rx_polarity_flip_physical{195.0}=0x0 +phy_chain_rx_polarity_flip_physical{196.0}=0x1 + +phy_chain_rx_polarity_flip_physical{197.0}=0x1 +phy_chain_rx_polarity_flip_physical{198.0}=0x1 +phy_chain_rx_polarity_flip_physical{199.0}=0x0 +phy_chain_rx_polarity_flip_physical{200.0}=0x1 + +phy_chain_rx_polarity_flip_physical{201.0}=0x1 +phy_chain_rx_polarity_flip_physical{202.0}=0x0 +phy_chain_rx_polarity_flip_physical{203.0}=0x1 +phy_chain_rx_polarity_flip_physical{204.0}=0x1 + +phy_chain_rx_polarity_flip_physical{205.0}=0x1 +phy_chain_rx_polarity_flip_physical{206.0}=0x1 +phy_chain_rx_polarity_flip_physical{207.0}=0x0 +phy_chain_rx_polarity_flip_physical{208.0}=0x0 + +phy_chain_rx_polarity_flip_physical{209.0}=0x1 +phy_chain_rx_polarity_flip_physical{210.0}=0x1 +phy_chain_rx_polarity_flip_physical{211.0}=0x0 +phy_chain_rx_polarity_flip_physical{212.0}=0x1 + +phy_chain_rx_polarity_flip_physical{213.0}=0x0 +phy_chain_rx_polarity_flip_physical{214.0}=0x1 +phy_chain_rx_polarity_flip_physical{215.0}=0x1 +phy_chain_rx_polarity_flip_physical{216.0}=0x0 + +phy_chain_rx_polarity_flip_physical{217.0}=0x1 +phy_chain_rx_polarity_flip_physical{218.0}=0x0 +phy_chain_rx_polarity_flip_physical{219.0}=0x1 +phy_chain_rx_polarity_flip_physical{220.0}=0x1 + +phy_chain_rx_polarity_flip_physical{221.0}=0x1 +phy_chain_rx_polarity_flip_physical{222.0}=0x1 +phy_chain_rx_polarity_flip_physical{223.0}=0x0 +phy_chain_rx_polarity_flip_physical{224.0}=0x0 + +phy_chain_rx_polarity_flip_physical{225.0}=0x1 +phy_chain_rx_polarity_flip_physical{226.0}=0x1 +phy_chain_rx_polarity_flip_physical{227.0}=0x1 +phy_chain_rx_polarity_flip_physical{228.0}=0x0 + +phy_chain_rx_polarity_flip_physical{229.0}=0x1 +phy_chain_rx_polarity_flip_physical{230.0}=0x0 +phy_chain_rx_polarity_flip_physical{231.0}=0x0 +phy_chain_rx_polarity_flip_physical{232.0}=0x1 + +phy_chain_rx_polarity_flip_physical{233.0}=0x1 +phy_chain_rx_polarity_flip_physical{234.0}=0x1 +phy_chain_rx_polarity_flip_physical{235.0}=0x1 +phy_chain_rx_polarity_flip_physical{236.0}=0x0 + +phy_chain_rx_polarity_flip_physical{237.0}=0x0 +phy_chain_rx_polarity_flip_physical{238.0}=0x1 +phy_chain_rx_polarity_flip_physical{239.0}=0x0 +phy_chain_rx_polarity_flip_physical{240.0}=0x0 + +phy_chain_rx_polarity_flip_physical{241.0}=0x0 +phy_chain_rx_polarity_flip_physical{242.0}=0x1 +phy_chain_rx_polarity_flip_physical{243.0}=0x0 +phy_chain_rx_polarity_flip_physical{244.0}=0x1 + +phy_chain_rx_polarity_flip_physical{245.0}=0x1 +phy_chain_rx_polarity_flip_physical{246.0}=0x0 +phy_chain_rx_polarity_flip_physical{247.0}=0x0 +phy_chain_rx_polarity_flip_physical{248.0}=0x1 + +phy_chain_rx_polarity_flip_physical{249.0}=0x0 +phy_chain_rx_polarity_flip_physical{250.0}=0x0 +phy_chain_rx_polarity_flip_physical{251.0}=0x1 +phy_chain_rx_polarity_flip_physical{252.0}=0x0 + +phy_chain_rx_polarity_flip_physical{253.0}=0x1 +phy_chain_rx_polarity_flip_physical{254.0}=0x0 +phy_chain_rx_polarity_flip_physical{255.0}=0x0 +phy_chain_rx_polarity_flip_physical{256.0}=0x0 + +# TX lane swap +phy_chain_tx_lane_map_physical{193.0}=0x2031 +phy_chain_tx_lane_map_physical{197.0}=0x1203 +phy_chain_tx_lane_map_physical{201.0}=0x0213 +phy_chain_tx_lane_map_physical{205.0}=0x3210 + +phy_chain_tx_lane_map_physical{209.0}=0x1023 +phy_chain_tx_lane_map_physical{213.0}=0x1203 +phy_chain_tx_lane_map_physical{217.0}=0x0213 +phy_chain_tx_lane_map_physical{221.0}=0x3102 + +phy_chain_tx_lane_map_physical{225.0}=0x2031 +phy_chain_tx_lane_map_physical{229.0}=0x1023 +phy_chain_tx_lane_map_physical{233.0}=0x1320 +phy_chain_tx_lane_map_physical{237.0}=0x2013 + +phy_chain_tx_lane_map_physical{241.0}=0x1023 +phy_chain_tx_lane_map_physical{245.0}=0x1203 +phy_chain_tx_lane_map_physical{249.0}=0x3120 +phy_chain_tx_lane_map_physical{253.0}=0x3210 + +# RX lane swap +phy_chain_rx_lane_map_physical{193.0}=0x1032 +phy_chain_rx_lane_map_physical{197.0}=0x1230 +phy_chain_rx_lane_map_physical{201.0}=0x0321 +phy_chain_rx_lane_map_physical{205.0}=0x3201 + +phy_chain_rx_lane_map_physical{209.0}=0x3201 +phy_chain_rx_lane_map_physical{213.0}=0x2031 +phy_chain_rx_lane_map_physical{217.0}=0x0321 +phy_chain_rx_lane_map_physical{221.0}=0x3201 + +phy_chain_rx_lane_map_physical{225.0}=0x2103 +phy_chain_rx_lane_map_physical{229.0}=0x2310 +phy_chain_rx_lane_map_physical{233.0}=0x0213 +phy_chain_rx_lane_map_physical{237.0}=0x1032 + +phy_chain_rx_lane_map_physical{241.0}=0x0321 +phy_chain_rx_lane_map_physical{245.0}=0x2301 +phy_chain_rx_lane_map_physical{249.0}=0x2103 +phy_chain_rx_lane_map_physical{253.0}=0x2013 + +physical_ports=64 +logical_ports=136 +uplink_ports=2 +dport_map_port_66=65 +dport_map_port_100=66 + +module_64ports=1 diff --git a/device/delta/x86_64-delta_ag5648-r0/Delta-ag5648/sai.profile b/device/delta/x86_64-delta_ag5648-r0/Delta-ag5648/sai.profile index 142de3e860c9..094e2d2cda01 100644 --- a/device/delta/x86_64-delta_ag5648-r0/Delta-ag5648/sai.profile +++ b/device/delta/x86_64-delta_ag5648-r0/Delta-ag5648/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-ag5648-48x25G+6x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-ag5648-48x25G+6x100G.config.bcm diff --git a/device/delta/x86_64-delta_ag5648-r0/Delta-ag5648/th-ag5648-48x25G+6x100G.config.bcm b/device/delta/x86_64-delta_ag5648-r0/Delta-ag5648/th-ag5648-48x25G+6x100G.config.bcm new file mode 100644 index 000000000000..86afb258fd1b --- /dev/null +++ b/device/delta/x86_64-delta_ag5648-r0/Delta-ag5648/th-ag5648-48x25G+6x100G.config.bcm @@ -0,0 +1,277 @@ +os=unix +schan_intr_enable=0 +l2_mem_entries=40960 +l2xmsg_mode=1 +l3_mem_entries=40960 +mem_cache_enable=0 +parity_correction=0 +parity_enable=0 +pbmp_oversubscribe=0x000fffc0000ffff0003ffffc0000001e +pbmp_xport_xe=0x000fffc0000ffff0003ffffc0000001e + +# Tile-0: 1, 5, 9, 21 +portmap_1=1:100 +portmap_2=5:100 +portmap_3=9:100 +portmap_4=21:100 + +## TX lane swap +xgxs_tx_lane_map_1=0x0123 +xgxs_tx_lane_map_2=0x2301 +xgxs_tx_lane_map_3=0x0123 +xgxs_tx_lane_map_4=0x1302 + +## RX lane swap +xgxs_rx_lane_map_1=0x0123 +xgxs_rx_lane_map_2=0x2301 +xgxs_rx_lane_map_3=0x0123 +xgxs_rx_lane_map_4=0x2031 + +## TX polarity +phy_xaui_tx_polarity_flip_1=0x0 +phy_xaui_tx_polarity_flip_2=0xf +phy_xaui_tx_polarity_flip_3=0x0 +phy_xaui_tx_polarity_flip_4=0xf + +## RX polarity +phy_xaui_rx_polarity_flip_1=0x0 +phy_xaui_rx_polarity_flip_2=0xf +phy_xaui_rx_polarity_flip_3=0x0 +phy_xaui_rx_polarity_flip_4=0xf + + +# Tile-1: 8, 9, 11, 12, 13 +portmap_34=33:25 +portmap_35=34:25 +portmap_36=35:25 +portmap_37=36:25 +portmap_38=37:25 +portmap_39=38:25 +portmap_40=39:25 +portmap_41=40:25 +portmap_42=41:25 +portmap_43=42:25 +portmap_44=43:25 +portmap_45=44:25 +portmap_46=49:25 +portmap_47=50:25 +portmap_48=51:25 +portmap_49=52:25 +portmap_50=53:25 +portmap_51=54:25 +portmap_52=55:25 +portmap_53=56:25 + + +## TX lane swap +xgxs_tx_lane_map_34=0x3210 +xgxs_tx_lane_map_38=0x0123 +xgxs_tx_lane_map_42=0x2031 +xgxs_tx_lane_map_46=0x0123 +xgxs_tx_lane_map_50=0x0123 + +## RX lane swap +xgxs_rx_lane_map_34=0x2301 +xgxs_rx_lane_map_38=0x1032 +xgxs_rx_lane_map_42=0x0213 +xgxs_rx_lane_map_46=0x2301 +xgxs_rx_lane_map_50=0x2301 + + +## TX polarity +phy_xaui_tx_polarity_flip_34=0x0 +phy_xaui_tx_polarity_flip_35=0x1 +phy_xaui_tx_polarity_flip_36=0x0 +phy_xaui_tx_polarity_flip_37=0x1 + +phy_xaui_tx_polarity_flip_38=0x1 +phy_xaui_tx_polarity_flip_39=0x0 +phy_xaui_tx_polarity_flip_40=0x1 +phy_xaui_tx_polarity_flip_41=0x0 + +phy_xaui_tx_polarity_flip_42=0x1 +phy_xaui_tx_polarity_flip_43=0x0 +phy_xaui_tx_polarity_flip_44=0x1 +phy_xaui_tx_polarity_flip_45=0x0 + +phy_xaui_tx_polarity_flip_46=0x0 +phy_xaui_tx_polarity_flip_47=0x1 +phy_xaui_tx_polarity_flip_48=0x0 +phy_xaui_tx_polarity_flip_49=0x1 + +phy_xaui_tx_polarity_flip_50=0x0 +phy_xaui_tx_polarity_flip_51=0x1 +phy_xaui_tx_polarity_flip_52=0x0 +phy_xaui_tx_polarity_flip_53=0x1 + + +## RX polarity +phy_xaui_rx_polarity_flip_34=0x0 +phy_xaui_rx_polarity_flip_35=0x1 +phy_xaui_rx_polarity_flip_36=0x0 +phy_xaui_rx_polarity_flip_37=0x1 + +phy_xaui_rx_polarity_flip_38=0x1 +phy_xaui_rx_polarity_flip_39=0x0 +phy_xaui_rx_polarity_flip_40=0x1 +phy_xaui_rx_polarity_flip_41=0x0 + +phy_xaui_rx_polarity_flip_42=0x1 +phy_xaui_rx_polarity_flip_43=0x0 +phy_xaui_rx_polarity_flip_44=0x1 +phy_xaui_rx_polarity_flip_45=0x0 + +phy_xaui_rx_polarity_flip_46=0x0 +phy_xaui_rx_polarity_flip_47=0x1 +phy_xaui_rx_polarity_flip_48=0x0 +phy_xaui_rx_polarity_flip_49=0x1 + +phy_xaui_rx_polarity_flip_50=0x0 +phy_xaui_rx_polarity_flip_51=0x1 +phy_xaui_rx_polarity_flip_52=0x0 +phy_xaui_rx_polarity_flip_53=0x1 + + +# Tile-2: 16, 17, 20, 21 +portmap_68=65:25 +portmap_69=66:25 +portmap_70=67:25 +portmap_71=68:25 +portmap_72=69:25 +portmap_73=70:25 +portmap_74=71:25 +portmap_75=72:25 +portmap_76=81:25 +portmap_77=82:25 +portmap_78=83:25 +portmap_79=84:25 +portmap_80=85:25 +portmap_81=86:25 +portmap_82=87:25 +portmap_83=88:25 + + +## TX lane swap +xgxs_tx_lane_map_68=0x3210 +xgxs_tx_lane_map_72=0x0123 +xgxs_tx_lane_map_76=0x0123 +xgxs_tx_lane_map_80=0x3210 + +## RX lane swap +xgxs_rx_lane_map_68=0x1032 +xgxs_rx_lane_map_72=0x2301 +xgxs_rx_lane_map_76=0x0123 +xgxs_rx_lane_map_80=0x3210 + + +## TX polarity +phy_xaui_tx_polarity_flip_68=0x0 +phy_xaui_tx_polarity_flip_69=0x1 +phy_xaui_tx_polarity_flip_70=0x0 +phy_xaui_tx_polarity_flip_71=0x1 + +phy_xaui_tx_polarity_flip_72=0x0 +phy_xaui_tx_polarity_flip_73=0x1 +phy_xaui_tx_polarity_flip_74=0x0 +phy_xaui_tx_polarity_flip_75=0x1 + +phy_xaui_tx_polarity_flip_76=0x0 +phy_xaui_tx_polarity_flip_77=0x1 +phy_xaui_tx_polarity_flip_78=0x0 +phy_xaui_tx_polarity_flip_79=0x1 + +phy_xaui_tx_polarity_flip_80=0x1 +phy_xaui_tx_polarity_flip_81=0x0 +phy_xaui_tx_polarity_flip_82=0x1 +phy_xaui_tx_polarity_flip_83=0x0 + +## RX polarity +phy_xaui_rx_polarity_flip_68=0x0 +phy_xaui_rx_polarity_flip_69=0x1 +phy_xaui_rx_polarity_flip_70=0x0 +phy_xaui_rx_polarity_flip_71=0x1 + +phy_xaui_rx_polarity_flip_72=0x0 +phy_xaui_rx_polarity_flip_73=0x1 +phy_xaui_rx_polarity_flip_74=0x0 +phy_xaui_rx_polarity_flip_75=0x1 + +phy_xaui_rx_polarity_flip_76=0x0 +phy_xaui_rx_polarity_flip_77=0x1 +phy_xaui_rx_polarity_flip_78=0x0 +phy_xaui_rx_polarity_flip_79=0x1 + +phy_xaui_rx_polarity_flip_80=0x1 +phy_xaui_rx_polarity_flip_81=0x0 +phy_xaui_rx_polarity_flip_82=0x1 +phy_xaui_rx_polarity_flip_83=0x0 + + +# Tile-3: 24, 25, 26; 27, 29 +portmap_102=97:25 +portmap_103=98:25 +portmap_104=99:25 +portmap_105=100:25 +portmap_106=101:25 +portmap_107=102:25 +portmap_108=103:25 +portmap_109=104:25 +portmap_110=105:25 +portmap_111=106:25 +portmap_112=107:25 +portmap_113=108:25 +portmap_114=109:100 +portmap_115=117:100 + + +## TX lane swap +xgxs_tx_lane_map_102=0x0123 +xgxs_tx_lane_map_106=0x3210 +xgxs_tx_lane_map_110=0x0123 +xgxs_tx_lane_map_114=0x3120 +xgxs_tx_lane_map_115=0x2301 + +## RX lane swap +xgxs_rx_lane_map_102=0x0123 +xgxs_rx_lane_map_106=0x3210 +xgxs_rx_lane_map_110=0x0123 +xgxs_rx_lane_map_114=0x3120 +xgxs_rx_lane_map_115=0x2301 + +## TX polarity +phy_xaui_tx_polarity_flip_102=0 +phy_xaui_tx_polarity_flip_103=1 +phy_xaui_tx_polarity_flip_104=0 +phy_xaui_tx_polarity_flip_105=1 + +phy_xaui_tx_polarity_flip_106=1 +phy_xaui_tx_polarity_flip_107=0 +phy_xaui_tx_polarity_flip_108=1 +phy_xaui_tx_polarity_flip_109=0 + +phy_xaui_tx_polarity_flip_110=0 +phy_xaui_tx_polarity_flip_111=1 +phy_xaui_tx_polarity_flip_112=0 +phy_xaui_tx_polarity_flip_113=1 + +phy_xaui_tx_polarity_flip_114=0xf +phy_xaui_tx_polarity_flip_115=0xf + +## RX polarity +phy_xaui_rx_polarity_flip_102=0 +phy_xaui_rx_polarity_flip_103=1 +phy_xaui_rx_polarity_flip_104=0 +phy_xaui_rx_polarity_flip_105=1 + +phy_xaui_rx_polarity_flip_106=1 +phy_xaui_rx_polarity_flip_107=0 +phy_xaui_rx_polarity_flip_108=1 +phy_xaui_rx_polarity_flip_109=0 + +phy_xaui_rx_polarity_flip_110=0 +phy_xaui_rx_polarity_flip_111=1 +phy_xaui_rx_polarity_flip_112=0 +phy_xaui_rx_polarity_flip_113=1 + +phy_xaui_rx_polarity_flip_114=0xf +phy_xaui_rx_polarity_flip_115=0xf diff --git a/device/delta/x86_64-delta_ag9032v1-r0/Delta-ag9032v1/sai.profile b/device/delta/x86_64-delta_ag9032v1-r0/Delta-ag9032v1/sai.profile index 08d9e7fa3b47..c77b2bf79a34 100644 --- a/device/delta/x86_64-delta_ag9032v1-r0/Delta-ag9032v1/sai.profile +++ b/device/delta/x86_64-delta_ag9032v1-r0/Delta-ag9032v1/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-ag9032v1-32x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-ag9032v1-32x100G.config.bcm diff --git a/device/delta/x86_64-delta_ag9032v1-r0/Delta-ag9032v1/th-ag9032v1-32x100G.config.bcm b/device/delta/x86_64-delta_ag9032v1-r0/Delta-ag9032v1/th-ag9032v1-32x100G.config.bcm new file mode 100644 index 000000000000..a088c8f7a6be --- /dev/null +++ b/device/delta/x86_64-delta_ag9032v1-r0/Delta-ag9032v1/th-ag9032v1-32x100G.config.bcm @@ -0,0 +1,523 @@ +os=unix +schan_intr_enable=0 +ctr_evict_enable=0 +l2_mem_entries=40960 +l2xmsg_mode=1 +l3_mem_entries=40960 +mem_cache_enable=0 +parity_correction=0 +parity_enable=0 +pbmp_oversubscribe=0x00003fc000000ff0000003fc000001fe +pbmp_xport_xe=0x00003fc000000ff0000003fc000001fe +port_phy_clause_1=45 +port_phy_clause_2=45 +port_phy_clause_3=45 +port_phy_clause_4=45 +port_phy_clause_5=45 +port_phy_clause_6=45 +port_phy_clause_7=45 +port_phy_clause_8=45 + +port_phy_clause_34=45 +port_phy_clause_35=45 +port_phy_clause_36=45 +port_phy_clause_37=45 +port_phy_clause_38=45 +port_phy_clause_39=45 +port_phy_clause_40=45 +port_phy_clause_41=45 + +port_phy_clause_68=45 +port_phy_clause_69=45 +port_phy_clause_70=45 +port_phy_clause_71=45 +port_phy_clause_72=45 +port_phy_clause_73=45 +port_phy_clause_74=45 +port_phy_clause_75=45 + +port_phy_clause_102=45 +port_phy_clause_103=45 +port_phy_clause_104=45 +port_phy_clause_105=45 +port_phy_clause_106=45 +port_phy_clause_107=45 +port_phy_clause_108=45 +port_phy_clause_109=45 + +port_phy_addr_1=0xff +port_phy_addr_2=0xff +port_phy_addr_3=0xff +port_phy_addr_4=0xff +port_phy_addr_5=0xff +port_phy_addr_6=0xff +port_phy_addr_7=0xff +port_phy_addr_8=0xff + +port_phy_addr_34=0xff +port_phy_addr_35=0xff +port_phy_addr_36=0xff +port_phy_addr_37=0xff +port_phy_addr_38=0xff +port_phy_addr_39=0xff +port_phy_addr_40=0xff +port_phy_addr_41=0xff + +port_phy_addr_68=0xff +port_phy_addr_69=0xff +port_phy_addr_70=0xff +port_phy_addr_71=0xff +port_phy_addr_72=0xff +port_phy_addr_73=0xff +port_phy_addr_74=0xff +port_phy_addr_75=0xff + +port_phy_addr_102=0xff +port_phy_addr_103=0xff +port_phy_addr_104=0xff +port_phy_addr_105=0xff +port_phy_addr_106=0xff +port_phy_addr_107=0xff +port_phy_addr_108=0xff +port_phy_addr_109=0xff + +# Tile-0 +portmap_1=1:100 +portmap_2=5:100 +portmap_3=9:100 +portmap_4=13:100 +portmap_5=17:100 +portmap_6=21:100 +portmap_7=25:100 +portmap_8=29:100 + +# Tile-1 +portmap_34=33:100 +portmap_35=37:100 +portmap_36=41:100 +portmap_37=45:100 +portmap_38=49:100 +portmap_39=53:100 +portmap_40=57:100 +portmap_41=61:100 + +# Tile-2 +portmap_68=65:100 +portmap_69=69:100 +portmap_70=73:100 +portmap_71=77:100 +portmap_72=81:100 +portmap_73=85:100 +portmap_74=89:100 +portmap_75=93:100 + +# Tile-3 +portmap_102=97:100 +portmap_103=101:100 +portmap_104=105:100 +portmap_105=109:100 +portmap_106=113:100 +portmap_107=117:100 +portmap_108=121:100 +portmap_109=125:100 + +dport_map_enable=1 +dport_map_indexed=1 +dport_map_direct=0 + +dport_map_port_36=1 +dport_map_port_37=2 +dport_map_port_38=3 +dport_map_port_35=4 +dport_map_port_34=5 +dport_map_port_39=6 +dport_map_port_40=7 +dport_map_port_41=8 + +dport_map_port_68=34 +dport_map_port_69=35 +dport_map_port_70=36 +dport_map_port_71=37 +dport_map_port_72=38 +dport_map_port_73=39 +dport_map_port_74=40 +dport_map_port_75=41 + +dport_map_port_102=68 +dport_map_port_103=69 +dport_map_port_104=70 +dport_map_port_105=71 +dport_map_port_108=72 +dport_map_port_106=73 +dport_map_port_1=74 +dport_map_port_107=75 + +dport_map_port_2=102 +dport_map_port_109=103 +dport_map_port_8=104 +dport_map_port_3=105 +dport_map_port_4=106 +dport_map_port_7=107 +dport_map_port_5=108 +dport_map_port_6=109 + +# Tile-0 FC0~FC7 +# TX polarity +phy_xaui_tx_polarity_flip_1=0xF +phy_xaui_tx_polarity_flip_2=0xF +phy_xaui_tx_polarity_flip_3=0x0 +phy_xaui_tx_polarity_flip_4=0x0 +phy_xaui_tx_polarity_flip_5=0x0 +phy_xaui_tx_polarity_flip_6=0x0 +phy_xaui_tx_polarity_flip_7=0xF +phy_xaui_tx_polarity_flip_8=0xF + +# RX polarity +phy_xaui_rx_polarity_flip_1=0xF +phy_xaui_rx_polarity_flip_2=0xF +phy_xaui_rx_polarity_flip_3=0x0 +phy_xaui_rx_polarity_flip_4=0x0 +phy_xaui_rx_polarity_flip_5=0x0 +phy_xaui_rx_polarity_flip_6=0x0 +phy_xaui_rx_polarity_flip_7=0xF +phy_xaui_rx_polarity_flip_8=0xF + +# TX lane swap +xgxs_tx_lane_map_1=0x1302 +xgxs_tx_lane_map_2=0x1302 +xgxs_tx_lane_map_3=0x0213 +xgxs_tx_lane_map_4=0x1302 +xgxs_tx_lane_map_5=0x1032 +xgxs_tx_lane_map_6=0x0213 +xgxs_tx_lane_map_7=0x3120 +xgxs_tx_lane_map_8=0x1302 + +# RX lane swap +xgxs_rx_lane_map_1=0x1302 +xgxs_rx_lane_map_2=0x1302 +xgxs_rx_lane_map_3=0x0213 +xgxs_rx_lane_map_4=0x1302 +xgxs_rx_lane_map_5=0x0123 +xgxs_rx_lane_map_6=0x1032 +xgxs_rx_lane_map_7=0x0213 +xgxs_rx_lane_map_8=0x2031 + +# Tile-1 FC8~FC15 +#TX polarity +phy_xaui_tx_polarity_flip_34=0x0 +phy_xaui_tx_polarity_flip_35=0x1 +phy_xaui_tx_polarity_flip_36=0x0 +phy_xaui_tx_polarity_flip_37=0x1 +phy_xaui_tx_polarity_flip_38=0xF +phy_xaui_tx_polarity_flip_39=0xE +phy_xaui_tx_polarity_flip_40=0x0 +phy_xaui_tx_polarity_flip_41=0xE + +#RX polarity +phy_xaui_rx_polarity_flip_34=0x0 +phy_xaui_rx_polarity_flip_35=0x0 +phy_xaui_rx_polarity_flip_36=0x0 +phy_xaui_rx_polarity_flip_37=0x2 +phy_xaui_rx_polarity_flip_38=0xF +phy_xaui_rx_polarity_flip_39=0xF +phy_xaui_rx_polarity_flip_40=0x0 +phy_xaui_rx_polarity_flip_41=0xF + +# TX lane swap +xgxs_tx_lane_map_34=0x0213 +xgxs_tx_lane_map_35=0x2031 +xgxs_tx_lane_map_36=0x0123 +xgxs_tx_lane_map_37=0x1032 +xgxs_tx_lane_map_38=0x0213 +xgxs_tx_lane_map_39=0x1302 +xgxs_tx_lane_map_40=0x0213 +xgxs_tx_lane_map_41=0x1302 + +# RX lane swap +xgxs_rx_lane_map_34=0x3120 +xgxs_rx_lane_map_35=0x2301 +xgxs_rx_lane_map_36=0x1032 +xgxs_rx_lane_map_37=0x0123 +xgxs_rx_lane_map_38=0x0213 +xgxs_rx_lane_map_39=0x1302 +xgxs_rx_lane_map_40=0x0213 +xgxs_rx_lane_map_41=0x1302 + +# Tile-2 FC16~FC23 +# TX polarity +phy_xaui_tx_polarity_flip_68=0x0 +phy_xaui_tx_polarity_flip_69=0xE +phy_xaui_tx_polarity_flip_70=0x0 +phy_xaui_tx_polarity_flip_71=0xE +phy_xaui_tx_polarity_flip_72=0xF +phy_xaui_tx_polarity_flip_73=0xE +phy_xaui_tx_polarity_flip_74=0xF +phy_xaui_tx_polarity_flip_75=0xE + +# RX polarity +phy_xaui_rx_polarity_flip_68=0x0 +phy_xaui_rx_polarity_flip_69=0xD +phy_xaui_rx_polarity_flip_70=0x0 +phy_xaui_rx_polarity_flip_71=0xF +phy_xaui_rx_polarity_flip_72=0xF +phy_xaui_rx_polarity_flip_73=0xF +phy_xaui_rx_polarity_flip_74=0xF +phy_xaui_rx_polarity_flip_75=0xF + +# TX lane swap +xgxs_tx_lane_map_68=0x3120 +xgxs_tx_lane_map_69=0x1302 +xgxs_tx_lane_map_70=0x0213 +xgxs_tx_lane_map_71=0x0123 +xgxs_tx_lane_map_72=0x0213 +xgxs_tx_lane_map_73=0x2031 +xgxs_tx_lane_map_74=0x0213 +xgxs_tx_lane_map_75=0x2031 + +# RX lane swap +xgxs_rx_lane_map_68=0x3120 +xgxs_rx_lane_map_69=0x1302 +xgxs_rx_lane_map_70=0x0213 +xgxs_rx_lane_map_71=0x2103 +xgxs_rx_lane_map_72=0x2031 +xgxs_rx_lane_map_73=0x0213 +xgxs_rx_lane_map_74=0x3210 +xgxs_rx_lane_map_75=0x0213 + +# Tile-3 +# portmap_0=x:xx // cpu port (not required, but included for illustration purposes) +# TX polarity +phy_xaui_tx_polarity_flip_102=0x0 +phy_xaui_tx_polarity_flip_103=0xF +phy_xaui_tx_polarity_flip_104=0x0 +phy_xaui_tx_polarity_flip_105=0x0 +phy_xaui_tx_polarity_flip_106=0x0 +phy_xaui_tx_polarity_flip_107=0x0 +phy_xaui_tx_polarity_flip_108=0xF +phy_xaui_tx_polarity_flip_109=0x0 + +# RX polarity +phy_xaui_rx_polarity_flip_102=0x0 +phy_xaui_rx_polarity_flip_103=0x2 +phy_xaui_rx_polarity_flip_104=0x0 +phy_xaui_rx_polarity_flip_105=0xF +phy_xaui_rx_polarity_flip_106=0x0 +phy_xaui_rx_polarity_flip_107=0x0 +phy_xaui_rx_polarity_flip_108=0xF +phy_xaui_rx_polarity_flip_109=0x2 + +# TX lane swap +xgxs_tx_lane_map_102=0x2031 +xgxs_tx_lane_map_103=0x0213 +xgxs_tx_lane_map_104=0x2031 +xgxs_tx_lane_map_105=0x0213 +xgxs_tx_lane_map_106=0x0123 +xgxs_tx_lane_map_107=0x0213 +xgxs_tx_lane_map_108=0x0312 +xgxs_tx_lane_map_109=0x3120 + +# RX lane swap +xgxs_rx_lane_map_102=0x0213 +xgxs_rx_lane_map_103=0x2031 +xgxs_rx_lane_map_104=0x0213 +xgxs_rx_lane_map_105=0x2031 +xgxs_rx_lane_map_106=0x0123 +xgxs_rx_lane_map_107=0x0213 +xgxs_rx_lane_map_108=0x1302 +xgxs_rx_lane_map_109=0x3120 + +#serdes_preemphasis_lane0_1=0x(post)(main)(pre) +#ce0 +serdes_preemphasis_lane0_36=0x3c320f +serdes_preemphasis_lane1_36=0x3c320f +serdes_preemphasis_lane2_36=0x3c320c +serdes_preemphasis_lane3_36=0x3c320c + +#ce1 +serdes_preemphasis_lane0_37=0x3c320f +serdes_preemphasis_lane1_37=0x3c320f +serdes_preemphasis_lane2_37=0x3c320c +serdes_preemphasis_lane3_37=0x37320c + +#ce2 +serdes_preemphasis_lane0_38=0x3c3206 +serdes_preemphasis_lane1_38=0x373206 +serdes_preemphasis_lane2_38=0x373206 +serdes_preemphasis_lane3_38=0x373206 + +#ce3 +serdes_preemphasis_lane0_35=0x3c3206 +serdes_preemphasis_lane1_35=0x3c3206 +serdes_preemphasis_lane2_35=0x3c3206 +serdes_preemphasis_lane3_35=0x3c3206 + +#ce4 +serdes_preemphasis_lane0_34=0x3c3206 +serdes_preemphasis_lane1_34=0x3c3206 +serdes_preemphasis_lane2_34=0x3c3206 +serdes_preemphasis_lane3_34=0x373206 + +#ce5 +serdes_preemphasis_lane0_39=0x323206 +serdes_preemphasis_lane1_39=0x323206 +serdes_preemphasis_lane2_39=0x323206 +serdes_preemphasis_lane3_39=0x323206 + +#ce6 +serdes_preemphasis_lane0_40=0x323206 +serdes_preemphasis_lane1_40=0x2D3206 +serdes_preemphasis_lane2_40=0x2D3206 +serdes_preemphasis_lane3_40=0x2D3206 + +#ce7 +serdes_preemphasis_lane0_41=0x2D3206 +serdes_preemphasis_lane1_41=0x2D3206 +serdes_preemphasis_lane2_41=0x2D3206 +serdes_preemphasis_lane3_41=0x2D3206 + +#ce8 +serdes_preemphasis_lane0_68=0x283206 +serdes_preemphasis_lane1_68=0x283206 +serdes_preemphasis_lane2_68=0x283206 +serdes_preemphasis_lane3_68=0x283206 + +#ce9 +serdes_preemphasis_lane0_69=0x283206 +serdes_preemphasis_lane1_69=0x283206 +serdes_preemphasis_lane2_69=0x283206 +serdes_preemphasis_lane3_69=0x283206 + +#ce10 +serdes_preemphasis_lane0_70=0x2D3206 +serdes_preemphasis_lane1_70=0x2D3206 +serdes_preemphasis_lane2_70=0x2D3206 +serdes_preemphasis_lane3_70=0x2D3206 + +#ce11 +serdes_preemphasis_lane0_71=0x2D3206 +serdes_preemphasis_lane1_71=0x2D3206 +serdes_preemphasis_lane2_71=0x2D3206 +serdes_preemphasis_lane3_71=0x2D3206 + +#ce12 +serdes_preemphasis_lane0_72=0x2D3203 +serdes_preemphasis_lane1_72=0x2D3206 +serdes_preemphasis_lane2_72=0x2D3206 +serdes_preemphasis_lane3_73=0x2D3206 + +#ce13 +serdes_preemphasis_lane0_73=0x2D3206 +serdes_preemphasis_lane1_73=0x283206 +serdes_preemphasis_lane2_73=0x283206 +serdes_preemphasis_lane3_73=0x283206 + +#ce14 +serdes_preemphasis_lane0_74=0x2D3203 +serdes_preemphasis_lane1_74=0x2D3203 +serdes_preemphasis_lane2_74=0x2D3203 +serdes_preemphasis_lane3_74=0x283206 + +#ce15 +serdes_preemphasis_lane0_75=0x2D3206 +serdes_preemphasis_lane1_75=0x283206 +serdes_preemphasis_lane2_75=0x283206 +serdes_preemphasis_lane3_75=0x283206 + +#ce16 +serdes_preemphasis_lane0_102=0x2D3206 +serdes_preemphasis_lane1_102=0x2D3206 +serdes_preemphasis_lane2_102=0x2D3206 +serdes_preemphasis_lane3_102=0x2D3206 + +#ce17 +serdes_preemphasis_lane0_103=0x2D3206 +serdes_preemphasis_lane1_103=0x283206 +serdes_preemphasis_lane2_103=0x283206 +serdes_preemphasis_lane3_103=0x283206 + +#ce18 +serdes_preemphasis_lane0_104=0x2D3206 +serdes_preemphasis_lane1_104=0x283206 +serdes_preemphasis_lane2_104=0x283206 +serdes_preemphasis_lane3_104=0x283206 + +#ce19 +serdes_preemphasis_lane0_105=0x2D3206 +serdes_preemphasis_lane1_105=0x2D3206 +serdes_preemphasis_lane2_105=0x2D3206 +serdes_preemphasis_lane3_105=0x2D3206 + +#ce20 +serdes_preemphasis_lane0_108=0x323206 +serdes_preemphasis_lane1_108=0x283206 +serdes_preemphasis_lane2_108=0x283206 +serdes_preemphasis_lane3_108=0x283206 + +#ce21 +serdes_preemphasis_lane0_106=0x2D3206 +serdes_preemphasis_lane1_106=0x283206 +serdes_preemphasis_lane2_106=0x283206 +serdes_preemphasis_lane3_106=0x283206 + +#ce22 +serdes_preemphasis_lane0_1=0x323206 +serdes_preemphasis_lane1_1=0x283206 +serdes_preemphasis_lane2_1=0x283206 +serdes_preemphasis_lane3_1=0x283206 + +#ce23 +serdes_preemphasis_lane0_107=0x323206 +serdes_preemphasis_lane1_107=0x283206 +serdes_preemphasis_lane2_107=0x283206 +serdes_preemphasis_lane3_107=0x283206 + +#ce24 +serdes_preemphasis_lane0_2=0x2D3206 +serdes_preemphasis_lane1_2=0x2D3206 +serdes_preemphasis_lane2_2=0x323206 +serdes_preemphasis_lane3_3=0x2D3206 + +#ce25 +serdes_preemphasis_lane0_109=0x323203 +serdes_preemphasis_lane1_109=0x2D3206 +serdes_preemphasis_lane2_109=0x2D3206 +serdes_preemphasis_lane3_109=0x2D3206 + +#ce26 +serdes_preemphasis_lane0_8=0x373206 +serdes_preemphasis_lane1_8=0x373206 +serdes_preemphasis_lane2_8=0x373206 +serdes_preemphasis_lane3_8=0x373206 + +#ce27 +serdes_preemphasis_lane0_3=0x323203 +serdes_preemphasis_lane1_3=0x323203 +serdes_preemphasis_lane2_3=0x323203 +serdes_preemphasis_lane3_3=0x323203 + +#ce28 +serdes_preemphasis_lane0_4=0x373203 +serdes_preemphasis_lane1_4=0x323203 +serdes_preemphasis_lane2_4=0x323203 +serdes_preemphasis_lane3_4=0x323205 + +#ce29 +serdes_preemphasis_lane0_7=0x3c3203 +serdes_preemphasis_lane1_7=0x3c3203 +serdes_preemphasis_lane2_7=0x3c3203 +serdes_preemphasis_lane3_7=0x3c3205 + +#ce30 +serdes_preemphasis_lane0_5=0x3c320f +serdes_preemphasis_lane1_5=0x3c320f +serdes_preemphasis_lane2_5=0x3c320c +serdes_preemphasis_lane3_5=0x2c320c + +#ce31 +serdes_preemphasis_lane0_6=0x3c320f +serdes_preemphasis_lane1_6=0x3c320f +serdes_preemphasis_lane2_6=0x2c320c +serdes_preemphasis_lane3_6=0x2c320c + + + diff --git a/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/sai.profile b/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/sai.profile index b2ecd7a6da47..21f013773e61 100644 --- a/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/sai.profile +++ b/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th2-ag9064-64x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th2-ag9064-64x100G.config.bcm diff --git a/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/th2-ag9064-64x100G.config.bcm b/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/th2-ag9064-64x100G.config.bcm new file mode 100644 index 000000000000..4cc15059e8ba --- /dev/null +++ b/device/delta/x86_64-delta_ag9064-r0/Delta-ag9064/th2-ag9064-64x100G.config.bcm @@ -0,0 +1,803 @@ +core_clock_frequency=1700 +dport_map_enable=1 +dport_map_port_102=31 +dport_map_port_103=32 +dport_map_port_104=64 +dport_map_port_105=63 +dport_map_port_106=20 +dport_map_port_107=21 +dport_map_port_108=51 +dport_map_port_109=54 +dport_map_port_10=13 +dport_map_port_110=22 +dport_map_port_111=23 +dport_map_port_112=53 +dport_map_port_113=56 +dport_map_port_114=24 +dport_map_port_115=25 +dport_map_port_116=55 +dport_map_port_117=58 +dport_map_port_11=43 +dport_map_port_12=45 +dport_map_port_13=1 +dport_map_port_14=2 +dport_map_port_15=34 +dport_map_port_16=33 +dport_map_port_1=7 +dport_map_port_2=9 +dport_map_port_34=3 +dport_map_port_35=4 +dport_map_port_36=36 +dport_map_port_37=35 +dport_map_port_38=5 +dport_map_port_39=6 +dport_map_port_3=40 +dport_map_port_40=38 +dport_map_port_41=37 +dport_map_port_42=14 +dport_map_port_43=8 +dport_map_port_44=39 +dport_map_port_45=46 +dport_map_port_46=15 +dport_map_port_47=16 +dport_map_port_48=48 +dport_map_port_49=47 +dport_map_port_4=42 +dport_map_port_5=10 +dport_map_port_68=17 +dport_map_port_69=18 +dport_map_port_6=11 +dport_map_port_70=50 +dport_map_port_71=49 +dport_map_port_72=19 +dport_map_port_73=52 +dport_map_port_74=57 +dport_map_port_75=26 +dport_map_port_76=27 +dport_map_port_77=28 +dport_map_port_78=60 +dport_map_port_79=59 +dport_map_port_7=41 +dport_map_port_80=29 +dport_map_port_81=30 +dport_map_port_82=62 +dport_map_port_83=61 +dport_map_port_8=44 +dport_map_port_9=12 +dpp_clock_ratio=2:3 +fpem_mem_entries=65536 +l2_mem_entries=40960 +l2xmsg_mode=1 +l3_mem_entries=40960 +mem_cache_enable=0 +os=unix +oversubscribe_mode=1 +parity_correction=0 +parity_enable=0 +pbmp_xport_xe=0x40003ffff0000ffffc0003fffe0001fffe +phy_chain_rx_lane_map_physical{1.0}=0x2130 +phy_chain_rx_lane_map_physical{101.0}=0x2310 +phy_chain_rx_lane_map_physical{105.0}=0x3021 +phy_chain_rx_lane_map_physical{109.0}=0x0213 +phy_chain_rx_lane_map_physical{113.0}=0x1302 +phy_chain_rx_lane_map_physical{117.0}=0x0312 +phy_chain_rx_lane_map_physical{121.0}=0x1203 +phy_chain_rx_lane_map_physical{125.0}=0x3021 +phy_chain_rx_lane_map_physical{129.0}=0x1302 +phy_chain_rx_lane_map_physical{13.0}=0x2310 +phy_chain_rx_lane_map_physical{133.0}=0x2310 +phy_chain_rx_lane_map_physical{137.0}=0x1023 +phy_chain_rx_lane_map_physical{141.0}=0x2031 +phy_chain_rx_lane_map_physical{145.0}=0x1032 +phy_chain_rx_lane_map_physical{149.0}=0x1203 +phy_chain_rx_lane_map_physical{153.0}=0x2310 +phy_chain_rx_lane_map_physical{157.0}=0x2013 +phy_chain_rx_lane_map_physical{161.0}=0x2103 +phy_chain_rx_lane_map_physical{165.0}=0x3012 +phy_chain_rx_lane_map_physical{169.0}=0x1320 +phy_chain_rx_lane_map_physical{17.0}=0x0213 +phy_chain_rx_lane_map_physical{173.0}=0x2301 +phy_chain_rx_lane_map_physical{177.0}=0x1032 +phy_chain_rx_lane_map_physical{181.0}=0x1032 +phy_chain_rx_lane_map_physical{185.0}=0x3210 +phy_chain_rx_lane_map_physical{189.0}=0x2103 +phy_chain_rx_lane_map_physical{193.0}=0x1032 +phy_chain_rx_lane_map_physical{197.0}=0x1032 +phy_chain_rx_lane_map_physical{201.0}=0x2301 +phy_chain_rx_lane_map_physical{205.0}=0x2301 +phy_chain_rx_lane_map_physical{209.0}=0x2103 +phy_chain_rx_lane_map_physical{21.0}=0x3120 +phy_chain_rx_lane_map_physical{213.0}=0x3201 +phy_chain_rx_lane_map_physical{217.0}=0x2301 +phy_chain_rx_lane_map_physical{221.0}=0x2301 +phy_chain_rx_lane_map_physical{225.0}=0x0123 +phy_chain_rx_lane_map_physical{229.0}=0x1302 +phy_chain_rx_lane_map_physical{233.0}=0x3120 +phy_chain_rx_lane_map_physical{237.0}=0x0123 +phy_chain_rx_lane_map_physical{241.0}=0x2310 +phy_chain_rx_lane_map_physical{245.0}=0x0312 +phy_chain_rx_lane_map_physical{249.0}=0x3021 +phy_chain_rx_lane_map_physical{25.0}=0x1203 +phy_chain_rx_lane_map_physical{253.0}=0x2013 +phy_chain_rx_lane_map_physical{29.0}=0x3012 +phy_chain_rx_lane_map_physical{33.0}=0x3210 +phy_chain_rx_lane_map_physical{37.0}=0x3210 +phy_chain_rx_lane_map_physical{41.0}=0x1230 +phy_chain_rx_lane_map_physical{45.0}=0x2013 +phy_chain_rx_lane_map_physical{49.0}=0x2301 +phy_chain_rx_lane_map_physical{5.0}=0x2031 +phy_chain_rx_lane_map_physical{53.0}=0x3210 +phy_chain_rx_lane_map_physical{57.0}=0x1203 +phy_chain_rx_lane_map_physical{61.0}=0x0231 +phy_chain_rx_lane_map_physical{65.0}=0x2301 +phy_chain_rx_lane_map_physical{69.0}=0x3210 +phy_chain_rx_lane_map_physical{73.0}=0x2013 +phy_chain_rx_lane_map_physical{77.0}=0x3012 +phy_chain_rx_lane_map_physical{81.0}=0x2301 +phy_chain_rx_lane_map_physical{85.0}=0x3210 +phy_chain_rx_lane_map_physical{89.0}=0x2013 +phy_chain_rx_lane_map_physical{9.0}=0x0312 +phy_chain_rx_lane_map_physical{93.0}=0x3012 +phy_chain_rx_lane_map_physical{97.0}=0x1320 +phy_chain_rx_polarity_flip_physical{1.0}=0x0 +phy_chain_rx_polarity_flip_physical{10.0}=0x1 +phy_chain_rx_polarity_flip_physical{100.0}=0x0 +phy_chain_rx_polarity_flip_physical{101.0}=0x1 +phy_chain_rx_polarity_flip_physical{102.0}=0x1 +phy_chain_rx_polarity_flip_physical{103.0}=0x0 +phy_chain_rx_polarity_flip_physical{104.0}=0x0 +phy_chain_rx_polarity_flip_physical{105.0}=0x1 +phy_chain_rx_polarity_flip_physical{106.0}=0x1 +phy_chain_rx_polarity_flip_physical{107.0}=0x0 +phy_chain_rx_polarity_flip_physical{108.0}=0x0 +phy_chain_rx_polarity_flip_physical{109.0}=0x1 +phy_chain_rx_polarity_flip_physical{11.0}=0x1 +phy_chain_rx_polarity_flip_physical{110.0}=0x1 +phy_chain_rx_polarity_flip_physical{111.0}=0x1 +phy_chain_rx_polarity_flip_physical{112.0}=0x1 +phy_chain_rx_polarity_flip_physical{113.0}=0x1 +phy_chain_rx_polarity_flip_physical{114.0}=0x0 +phy_chain_rx_polarity_flip_physical{115.0}=0x1 +phy_chain_rx_polarity_flip_physical{116.0}=0x0 +phy_chain_rx_polarity_flip_physical{117.0}=0x0 +phy_chain_rx_polarity_flip_physical{118.0}=0x0 +phy_chain_rx_polarity_flip_physical{119.0}=0x0 +phy_chain_rx_polarity_flip_physical{12.0}=0x0 +phy_chain_rx_polarity_flip_physical{120.0}=0x1 +phy_chain_rx_polarity_flip_physical{121.0}=0x1 +phy_chain_rx_polarity_flip_physical{122.0}=0x0 +phy_chain_rx_polarity_flip_physical{123.0}=0x1 +phy_chain_rx_polarity_flip_physical{124.0}=0x1 +phy_chain_rx_polarity_flip_physical{125.0}=0x1 +phy_chain_rx_polarity_flip_physical{126.0}=0x0 +phy_chain_rx_polarity_flip_physical{127.0}=0x1 +phy_chain_rx_polarity_flip_physical{128.0}=0x0 +phy_chain_rx_polarity_flip_physical{129.0}=0x0 +phy_chain_rx_polarity_flip_physical{13.0}=0x0 +phy_chain_rx_polarity_flip_physical{130.0}=0x1 +phy_chain_rx_polarity_flip_physical{131.0}=0x0 +phy_chain_rx_polarity_flip_physical{132.0}=0x0 +phy_chain_rx_polarity_flip_physical{133.0}=0x0 +phy_chain_rx_polarity_flip_physical{134.0}=0x1 +phy_chain_rx_polarity_flip_physical{135.0}=0x1 +phy_chain_rx_polarity_flip_physical{136.0}=0x1 +phy_chain_rx_polarity_flip_physical{137.0}=0x0 +phy_chain_rx_polarity_flip_physical{138.0}=0x0 +phy_chain_rx_polarity_flip_physical{139.0}=0x1 +phy_chain_rx_polarity_flip_physical{14.0}=0x1 +phy_chain_rx_polarity_flip_physical{140.0}=0x0 +phy_chain_rx_polarity_flip_physical{141.0}=0x1 +phy_chain_rx_polarity_flip_physical{142.0}=0x1 +phy_chain_rx_polarity_flip_physical{143.0}=0x0 +phy_chain_rx_polarity_flip_physical{144.0}=0x0 +phy_chain_rx_polarity_flip_physical{145.0}=0x1 +phy_chain_rx_polarity_flip_physical{146.0}=0x1 +phy_chain_rx_polarity_flip_physical{147.0}=0x0 +phy_chain_rx_polarity_flip_physical{148.0}=0x0 +phy_chain_rx_polarity_flip_physical{149.0}=0x0 +phy_chain_rx_polarity_flip_physical{15.0}=0x0 +phy_chain_rx_polarity_flip_physical{150.0}=0x1 +phy_chain_rx_polarity_flip_physical{151.0}=0x0 +phy_chain_rx_polarity_flip_physical{152.0}=0x1 +phy_chain_rx_polarity_flip_physical{153.0}=0x1 +phy_chain_rx_polarity_flip_physical{154.0}=0x1 +phy_chain_rx_polarity_flip_physical{155.0}=0x0 +phy_chain_rx_polarity_flip_physical{156.0}=0x0 +phy_chain_rx_polarity_flip_physical{157.0}=0x1 +phy_chain_rx_polarity_flip_physical{158.0}=0x0 +phy_chain_rx_polarity_flip_physical{159.0}=0x0 +phy_chain_rx_polarity_flip_physical{16.0}=0x0 +phy_chain_rx_polarity_flip_physical{160.0}=0x0 +phy_chain_rx_polarity_flip_physical{161.0}=0x0 +phy_chain_rx_polarity_flip_physical{162.0}=0x1 +phy_chain_rx_polarity_flip_physical{163.0}=0x0 +phy_chain_rx_polarity_flip_physical{164.0}=0x1 +phy_chain_rx_polarity_flip_physical{165.0}=0x0 +phy_chain_rx_polarity_flip_physical{166.0}=0x0 +phy_chain_rx_polarity_flip_physical{167.0}=0x0 +phy_chain_rx_polarity_flip_physical{168.0}=0x1 +phy_chain_rx_polarity_flip_physical{169.0}=0x0 +phy_chain_rx_polarity_flip_physical{17.0}=0x1 +phy_chain_rx_polarity_flip_physical{170.0}=0x0 +phy_chain_rx_polarity_flip_physical{171.0}=0x0 +phy_chain_rx_polarity_flip_physical{172.0}=0x1 +phy_chain_rx_polarity_flip_physical{173.0}=0x0 +phy_chain_rx_polarity_flip_physical{174.0}=0x0 +phy_chain_rx_polarity_flip_physical{175.0}=0x1 +phy_chain_rx_polarity_flip_physical{176.0}=0x1 +phy_chain_rx_polarity_flip_physical{177.0}=0x1 +phy_chain_rx_polarity_flip_physical{178.0}=0x0 +phy_chain_rx_polarity_flip_physical{179.0}=0x1 +phy_chain_rx_polarity_flip_physical{18.0}=0x0 +phy_chain_rx_polarity_flip_physical{180.0}=0x1 +phy_chain_rx_polarity_flip_physical{181.0}=0x0 +phy_chain_rx_polarity_flip_physical{182.0}=0x1 +phy_chain_rx_polarity_flip_physical{183.0}=0x1 +phy_chain_rx_polarity_flip_physical{184.0}=0x0 +phy_chain_rx_polarity_flip_physical{185.0}=0x1 +phy_chain_rx_polarity_flip_physical{186.0}=0x1 +phy_chain_rx_polarity_flip_physical{187.0}=0x1 +phy_chain_rx_polarity_flip_physical{188.0}=0x0 +phy_chain_rx_polarity_flip_physical{189.0}=0x0 +phy_chain_rx_polarity_flip_physical{19.0}=0x0 +phy_chain_rx_polarity_flip_physical{190.0}=0x0 +phy_chain_rx_polarity_flip_physical{191.0}=0x0 +phy_chain_rx_polarity_flip_physical{192.0}=0x1 +phy_chain_rx_polarity_flip_physical{193.0}=0x1 +phy_chain_rx_polarity_flip_physical{194.0}=0x0 +phy_chain_rx_polarity_flip_physical{195.0}=0x1 +phy_chain_rx_polarity_flip_physical{196.0}=0x1 +phy_chain_rx_polarity_flip_physical{197.0}=0x0 +phy_chain_rx_polarity_flip_physical{198.0}=0x1 +phy_chain_rx_polarity_flip_physical{199.0}=0x1 +phy_chain_rx_polarity_flip_physical{2.0}=0x0 +phy_chain_rx_polarity_flip_physical{20.0}=0x0 +phy_chain_rx_polarity_flip_physical{200.0}=0x0 +phy_chain_rx_polarity_flip_physical{201.0}=0x0 +phy_chain_rx_polarity_flip_physical{202.0}=0x1 +phy_chain_rx_polarity_flip_physical{203.0}=0x0 +phy_chain_rx_polarity_flip_physical{204.0}=0x1 +phy_chain_rx_polarity_flip_physical{205.0}=0x0 +phy_chain_rx_polarity_flip_physical{206.0}=0x1 +phy_chain_rx_polarity_flip_physical{207.0}=0x1 +phy_chain_rx_polarity_flip_physical{208.0}=0x0 +phy_chain_rx_polarity_flip_physical{209.0}=0x0 +phy_chain_rx_polarity_flip_physical{21.0}=0x1 +phy_chain_rx_polarity_flip_physical{210.0}=0x1 +phy_chain_rx_polarity_flip_physical{211.0}=0x0 +phy_chain_rx_polarity_flip_physical{212.0}=0x1 +phy_chain_rx_polarity_flip_physical{213.0}=0x1 +phy_chain_rx_polarity_flip_physical{214.0}=0x1 +phy_chain_rx_polarity_flip_physical{215.0}=0x1 +phy_chain_rx_polarity_flip_physical{216.0}=0x0 +phy_chain_rx_polarity_flip_physical{217.0}=0x0 +phy_chain_rx_polarity_flip_physical{218.0}=0x1 +phy_chain_rx_polarity_flip_physical{219.0}=0x0 +phy_chain_rx_polarity_flip_physical{22.0}=0x0 +phy_chain_rx_polarity_flip_physical{220.0}=0x0 +phy_chain_rx_polarity_flip_physical{221.0}=0x0 +phy_chain_rx_polarity_flip_physical{222.0}=0x0 +phy_chain_rx_polarity_flip_physical{223.0}=0x1 +phy_chain_rx_polarity_flip_physical{224.0}=0x1 +phy_chain_rx_polarity_flip_physical{225.0}=0x1 +phy_chain_rx_polarity_flip_physical{226.0}=0x1 +phy_chain_rx_polarity_flip_physical{227.0}=0x1 +phy_chain_rx_polarity_flip_physical{228.0}=0x1 +phy_chain_rx_polarity_flip_physical{229.0}=0x0 +phy_chain_rx_polarity_flip_physical{23.0}=0x1 +phy_chain_rx_polarity_flip_physical{230.0}=0x0 +phy_chain_rx_polarity_flip_physical{231.0}=0x1 +phy_chain_rx_polarity_flip_physical{232.0}=0x1 +phy_chain_rx_polarity_flip_physical{233.0}=0x1 +phy_chain_rx_polarity_flip_physical{234.0}=0x0 +phy_chain_rx_polarity_flip_physical{235.0}=0x1 +phy_chain_rx_polarity_flip_physical{236.0}=0x1 +phy_chain_rx_polarity_flip_physical{237.0}=0x1 +phy_chain_rx_polarity_flip_physical{238.0}=0x1 +phy_chain_rx_polarity_flip_physical{239.0}=0x1 +phy_chain_rx_polarity_flip_physical{24.0}=0x1 +phy_chain_rx_polarity_flip_physical{240.0}=0x0 +phy_chain_rx_polarity_flip_physical{241.0}=0x0 +phy_chain_rx_polarity_flip_physical{242.0}=0x1 +phy_chain_rx_polarity_flip_physical{243.0}=0x0 +phy_chain_rx_polarity_flip_physical{244.0}=0x0 +phy_chain_rx_polarity_flip_physical{245.0}=0x1 +phy_chain_rx_polarity_flip_physical{246.0}=0x0 +phy_chain_rx_polarity_flip_physical{247.0}=0x1 +phy_chain_rx_polarity_flip_physical{248.0}=0x1 +phy_chain_rx_polarity_flip_physical{249.0}=0x1 +phy_chain_rx_polarity_flip_physical{25.0}=0x0 +phy_chain_rx_polarity_flip_physical{250.0}=0x0 +phy_chain_rx_polarity_flip_physical{251.0}=0x1 +phy_chain_rx_polarity_flip_physical{252.0}=0x0 +phy_chain_rx_polarity_flip_physical{253.0}=0x1 +phy_chain_rx_polarity_flip_physical{254.0}=0x1 +phy_chain_rx_polarity_flip_physical{255.0}=0x0 +phy_chain_rx_polarity_flip_physical{256.0}=0x1 +phy_chain_rx_polarity_flip_physical{26.0}=0x0 +phy_chain_rx_polarity_flip_physical{27.0}=0x0 +phy_chain_rx_polarity_flip_physical{28.0}=0x1 +phy_chain_rx_polarity_flip_physical{29.0}=0x0 +phy_chain_rx_polarity_flip_physical{3.0}=0x1 +phy_chain_rx_polarity_flip_physical{30.0}=0x1 +phy_chain_rx_polarity_flip_physical{31.0}=0x0 +phy_chain_rx_polarity_flip_physical{32.0}=0x0 +phy_chain_rx_polarity_flip_physical{33.0}=0x0 +phy_chain_rx_polarity_flip_physical{34.0}=0x1 +phy_chain_rx_polarity_flip_physical{35.0}=0x1 +phy_chain_rx_polarity_flip_physical{36.0}=0x1 +phy_chain_rx_polarity_flip_physical{37.0}=0x0 +phy_chain_rx_polarity_flip_physical{38.0}=0x1 +phy_chain_rx_polarity_flip_physical{39.0}=0x1 +phy_chain_rx_polarity_flip_physical{4.0}=0x1 +phy_chain_rx_polarity_flip_physical{40.0}=0x1 +phy_chain_rx_polarity_flip_physical{41.0}=0x0 +phy_chain_rx_polarity_flip_physical{42.0}=0x0 +phy_chain_rx_polarity_flip_physical{43.0}=0x0 +phy_chain_rx_polarity_flip_physical{44.0}=0x0 +phy_chain_rx_polarity_flip_physical{45.0}=0x0 +phy_chain_rx_polarity_flip_physical{46.0}=0x1 +phy_chain_rx_polarity_flip_physical{47.0}=0x1 +phy_chain_rx_polarity_flip_physical{48.0}=0x0 +phy_chain_rx_polarity_flip_physical{49.0}=0x0 +phy_chain_rx_polarity_flip_physical{5.0}=0x0 +phy_chain_rx_polarity_flip_physical{50.0}=0x0 +phy_chain_rx_polarity_flip_physical{51.0}=0x0 +phy_chain_rx_polarity_flip_physical{52.0}=0x0 +phy_chain_rx_polarity_flip_physical{53.0}=0x0 +phy_chain_rx_polarity_flip_physical{54.0}=0x1 +phy_chain_rx_polarity_flip_physical{55.0}=0x0 +phy_chain_rx_polarity_flip_physical{56.0}=0x0 +phy_chain_rx_polarity_flip_physical{57.0}=0x0 +phy_chain_rx_polarity_flip_physical{58.0}=0x1 +phy_chain_rx_polarity_flip_physical{59.0}=0x1 +phy_chain_rx_polarity_flip_physical{6.0}=0x0 +phy_chain_rx_polarity_flip_physical{60.0}=0x0 +phy_chain_rx_polarity_flip_physical{61.0}=0x0 +phy_chain_rx_polarity_flip_physical{62.0}=0x1 +phy_chain_rx_polarity_flip_physical{63.0}=0x0 +phy_chain_rx_polarity_flip_physical{64.0}=0x1 +phy_chain_rx_polarity_flip_physical{65.0}=0x0 +phy_chain_rx_polarity_flip_physical{66.0}=0x1 +phy_chain_rx_polarity_flip_physical{67.0}=0x0 +phy_chain_rx_polarity_flip_physical{68.0}=0x0 +phy_chain_rx_polarity_flip_physical{69.0}=0x0 +phy_chain_rx_polarity_flip_physical{7.0}=0x1 +phy_chain_rx_polarity_flip_physical{70.0}=0x0 +phy_chain_rx_polarity_flip_physical{71.0}=0x0 +phy_chain_rx_polarity_flip_physical{72.0}=0x0 +phy_chain_rx_polarity_flip_physical{73.0}=0x0 +phy_chain_rx_polarity_flip_physical{74.0}=0x0 +phy_chain_rx_polarity_flip_physical{75.0}=0x0 +phy_chain_rx_polarity_flip_physical{76.0}=0x1 +phy_chain_rx_polarity_flip_physical{77.0}=0x1 +phy_chain_rx_polarity_flip_physical{78.0}=0x1 +phy_chain_rx_polarity_flip_physical{79.0}=0x0 +phy_chain_rx_polarity_flip_physical{8.0}=0x0 +phy_chain_rx_polarity_flip_physical{80.0}=0x1 +phy_chain_rx_polarity_flip_physical{81.0}=0x0 +phy_chain_rx_polarity_flip_physical{82.0}=0x0 +phy_chain_rx_polarity_flip_physical{83.0}=0x0 +phy_chain_rx_polarity_flip_physical{84.0}=0x0 +phy_chain_rx_polarity_flip_physical{85.0}=0x0 +phy_chain_rx_polarity_flip_physical{86.0}=0x0 +phy_chain_rx_polarity_flip_physical{87.0}=0x0 +phy_chain_rx_polarity_flip_physical{88.0}=0x0 +phy_chain_rx_polarity_flip_physical{89.0}=0x0 +phy_chain_rx_polarity_flip_physical{9.0}=0x0 +phy_chain_rx_polarity_flip_physical{90.0}=0x0 +phy_chain_rx_polarity_flip_physical{91.0}=0x0 +phy_chain_rx_polarity_flip_physical{92.0}=0x1 +phy_chain_rx_polarity_flip_physical{93.0}=0x0 +phy_chain_rx_polarity_flip_physical{94.0}=0x1 +phy_chain_rx_polarity_flip_physical{95.0}=0x1 +phy_chain_rx_polarity_flip_physical{96.0}=0x1 +phy_chain_rx_polarity_flip_physical{97.0}=0x0 +phy_chain_rx_polarity_flip_physical{98.0}=0x0 +phy_chain_rx_polarity_flip_physical{99.0}=0x0 +phy_chain_tx_lane_map_physical{1.0}=0x2301 +phy_chain_tx_lane_map_physical{101.0}=0x2103 +phy_chain_tx_lane_map_physical{105.0}=0x2310 +phy_chain_tx_lane_map_physical{109.0}=0x2013 +phy_chain_tx_lane_map_physical{113.0}=0x0312 +phy_chain_tx_lane_map_physical{117.0}=0x1230 +phy_chain_tx_lane_map_physical{121.0}=0x1203 +phy_chain_tx_lane_map_physical{125.0}=0x1203 +phy_chain_tx_lane_map_physical{129.0}=0x1320 +phy_chain_tx_lane_map_physical{13.0}=0x0312 +phy_chain_tx_lane_map_physical{133.0}=0x3201 +phy_chain_tx_lane_map_physical{137.0}=0x2130 +phy_chain_tx_lane_map_physical{141.0}=0x1032 +phy_chain_tx_lane_map_physical{145.0}=0x1320 +phy_chain_tx_lane_map_physical{149.0}=0x0321 +phy_chain_tx_lane_map_physical{153.0}=0x1023 +phy_chain_tx_lane_map_physical{157.0}=0x3021 +phy_chain_tx_lane_map_physical{161.0}=0x0321 +phy_chain_tx_lane_map_physical{165.0}=0x2130 +phy_chain_tx_lane_map_physical{169.0}=0x1320 +phy_chain_tx_lane_map_physical{17.0}=0x0213 +phy_chain_tx_lane_map_physical{173.0}=0x2130 +phy_chain_tx_lane_map_physical{177.0}=0x0321 +phy_chain_tx_lane_map_physical{181.0}=0x2130 +phy_chain_tx_lane_map_physical{185.0}=0x0132 +phy_chain_tx_lane_map_physical{189.0}=0x1320 +phy_chain_tx_lane_map_physical{193.0}=0x3012 +phy_chain_tx_lane_map_physical{197.0}=0x2130 +phy_chain_tx_lane_map_physical{201.0}=0x1023 +phy_chain_tx_lane_map_physical{205.0}=0x1320 +phy_chain_tx_lane_map_physical{209.0}=0x0321 +phy_chain_tx_lane_map_physical{21.0}=0x2310 +phy_chain_tx_lane_map_physical{213.0}=0x2031 +phy_chain_tx_lane_map_physical{217.0}=0x1032 +phy_chain_tx_lane_map_physical{221.0}=0x3201 +phy_chain_tx_lane_map_physical{225.0}=0x0123 +phy_chain_tx_lane_map_physical{229.0}=0x0231 +phy_chain_tx_lane_map_physical{233.0}=0x1302 +phy_chain_tx_lane_map_physical{237.0}=0x3210 +phy_chain_tx_lane_map_physical{241.0}=0x0312 +phy_chain_tx_lane_map_physical{245.0}=0x2031 +phy_chain_tx_lane_map_physical{249.0}=0x3201 +phy_chain_tx_lane_map_physical{25.0}=0x0312 +phy_chain_tx_lane_map_physical{253.0}=0x3120 +phy_chain_tx_lane_map_physical{29.0}=0x1230 +phy_chain_tx_lane_map_physical{33.0}=0x3201 +phy_chain_tx_lane_map_physical{37.0}=0x3201 +phy_chain_tx_lane_map_physical{41.0}=0x3201 +phy_chain_tx_lane_map_physical{45.0}=0x2031 +phy_chain_tx_lane_map_physical{49.0}=0x0132 +phy_chain_tx_lane_map_physical{5.0}=0x2301 +phy_chain_tx_lane_map_physical{53.0}=0x3201 +phy_chain_tx_lane_map_physical{57.0}=0x3201 +phy_chain_tx_lane_map_physical{61.0}=0x2031 +phy_chain_tx_lane_map_physical{65.0}=0x0321 +phy_chain_tx_lane_map_physical{69.0}=0x3201 +phy_chain_tx_lane_map_physical{73.0}=0x3201 +phy_chain_tx_lane_map_physical{77.0}=0x1032 +phy_chain_tx_lane_map_physical{81.0}=0x0132 +phy_chain_tx_lane_map_physical{85.0}=0x1320 +phy_chain_tx_lane_map_physical{89.0}=0x3201 +phy_chain_tx_lane_map_physical{9.0}=0x2130 +phy_chain_tx_lane_map_physical{93.0}=0x0321 +phy_chain_tx_lane_map_physical{97.0}=0x1320 +phy_chain_tx_polarity_flip_physical{1.0}=0x1 +phy_chain_tx_polarity_flip_physical{10.0}=0x1 +phy_chain_tx_polarity_flip_physical{100.0}=0x1 +phy_chain_tx_polarity_flip_physical{101.0}=0x0 +phy_chain_tx_polarity_flip_physical{102.0}=0x0 +phy_chain_tx_polarity_flip_physical{103.0}=0x1 +phy_chain_tx_polarity_flip_physical{104.0}=0x0 +phy_chain_tx_polarity_flip_physical{105.0}=0x1 +phy_chain_tx_polarity_flip_physical{106.0}=0x1 +phy_chain_tx_polarity_flip_physical{107.0}=0x0 +phy_chain_tx_polarity_flip_physical{108.0}=0x0 +phy_chain_tx_polarity_flip_physical{109.0}=0x0 +phy_chain_tx_polarity_flip_physical{11.0}=0x1 +phy_chain_tx_polarity_flip_physical{110.0}=0x1 +phy_chain_tx_polarity_flip_physical{111.0}=0x1 +phy_chain_tx_polarity_flip_physical{112.0}=0x1 +phy_chain_tx_polarity_flip_physical{113.0}=0x1 +phy_chain_tx_polarity_flip_physical{114.0}=0x0 +phy_chain_tx_polarity_flip_physical{115.0}=0x1 +phy_chain_tx_polarity_flip_physical{116.0}=0x1 +phy_chain_tx_polarity_flip_physical{117.0}=0x1 +phy_chain_tx_polarity_flip_physical{118.0}=0x1 +phy_chain_tx_polarity_flip_physical{119.0}=0x1 +phy_chain_tx_polarity_flip_physical{12.0}=0x1 +phy_chain_tx_polarity_flip_physical{120.0}=0x0 +phy_chain_tx_polarity_flip_physical{121.0}=0x0 +phy_chain_tx_polarity_flip_physical{122.0}=0x0 +phy_chain_tx_polarity_flip_physical{123.0}=0x0 +phy_chain_tx_polarity_flip_physical{124.0}=0x0 +phy_chain_tx_polarity_flip_physical{125.0}=0x0 +phy_chain_tx_polarity_flip_physical{126.0}=0x0 +phy_chain_tx_polarity_flip_physical{127.0}=0x1 +phy_chain_tx_polarity_flip_physical{128.0}=0x1 +phy_chain_tx_polarity_flip_physical{129.0}=0x0 +phy_chain_tx_polarity_flip_physical{13.0}=0x1 +phy_chain_tx_polarity_flip_physical{130.0}=0x1 +phy_chain_tx_polarity_flip_physical{131.0}=0x1 +phy_chain_tx_polarity_flip_physical{132.0}=0x1 +phy_chain_tx_polarity_flip_physical{133.0}=0x0 +phy_chain_tx_polarity_flip_physical{134.0}=0x0 +phy_chain_tx_polarity_flip_physical{135.0}=0x1 +phy_chain_tx_polarity_flip_physical{136.0}=0x0 +phy_chain_tx_polarity_flip_physical{137.0}=0x0 +phy_chain_tx_polarity_flip_physical{138.0}=0x1 +phy_chain_tx_polarity_flip_physical{139.0}=0x0 +phy_chain_tx_polarity_flip_physical{14.0}=0x1 +phy_chain_tx_polarity_flip_physical{140.0}=0x1 +phy_chain_tx_polarity_flip_physical{141.0}=0x1 +phy_chain_tx_polarity_flip_physical{142.0}=0x0 +phy_chain_tx_polarity_flip_physical{143.0}=0x1 +phy_chain_tx_polarity_flip_physical{144.0}=0x1 +phy_chain_tx_polarity_flip_physical{145.0}=0x1 +phy_chain_tx_polarity_flip_physical{146.0}=0x0 +phy_chain_tx_polarity_flip_physical{147.0}=0x0 +phy_chain_tx_polarity_flip_physical{148.0}=0x1 +phy_chain_tx_polarity_flip_physical{149.0}=0x1 +phy_chain_tx_polarity_flip_physical{15.0}=0x1 +phy_chain_tx_polarity_flip_physical{150.0}=0x0 +phy_chain_tx_polarity_flip_physical{151.0}=0x1 +phy_chain_tx_polarity_flip_physical{152.0}=0x1 +phy_chain_tx_polarity_flip_physical{153.0}=0x0 +phy_chain_tx_polarity_flip_physical{154.0}=0x1 +phy_chain_tx_polarity_flip_physical{155.0}=0x0 +phy_chain_tx_polarity_flip_physical{156.0}=0x0 +phy_chain_tx_polarity_flip_physical{157.0}=0x1 +phy_chain_tx_polarity_flip_physical{158.0}=0x0 +phy_chain_tx_polarity_flip_physical{159.0}=0x0 +phy_chain_tx_polarity_flip_physical{16.0}=0x1 +phy_chain_tx_polarity_flip_physical{160.0}=0x1 +phy_chain_tx_polarity_flip_physical{161.0}=0x0 +phy_chain_tx_polarity_flip_physical{162.0}=0x0 +phy_chain_tx_polarity_flip_physical{163.0}=0x0 +phy_chain_tx_polarity_flip_physical{164.0}=0x1 +phy_chain_tx_polarity_flip_physical{165.0}=0x0 +phy_chain_tx_polarity_flip_physical{166.0}=0x0 +phy_chain_tx_polarity_flip_physical{167.0}=0x0 +phy_chain_tx_polarity_flip_physical{168.0}=0x1 +phy_chain_tx_polarity_flip_physical{169.0}=0x1 +phy_chain_tx_polarity_flip_physical{17.0}=0x0 +phy_chain_tx_polarity_flip_physical{170.0}=0x0 +phy_chain_tx_polarity_flip_physical{171.0}=0x1 +phy_chain_tx_polarity_flip_physical{172.0}=0x1 +phy_chain_tx_polarity_flip_physical{173.0}=0x1 +phy_chain_tx_polarity_flip_physical{174.0}=0x1 +phy_chain_tx_polarity_flip_physical{175.0}=0x1 +phy_chain_tx_polarity_flip_physical{176.0}=0x0 +phy_chain_tx_polarity_flip_physical{177.0}=0x0 +phy_chain_tx_polarity_flip_physical{178.0}=0x1 +phy_chain_tx_polarity_flip_physical{179.0}=0x0 +phy_chain_tx_polarity_flip_physical{18.0}=0x0 +phy_chain_tx_polarity_flip_physical{180.0}=0x0 +phy_chain_tx_polarity_flip_physical{181.0}=0x0 +phy_chain_tx_polarity_flip_physical{182.0}=0x1 +phy_chain_tx_polarity_flip_physical{183.0}=0x0 +phy_chain_tx_polarity_flip_physical{184.0}=0x1 +phy_chain_tx_polarity_flip_physical{185.0}=0x1 +phy_chain_tx_polarity_flip_physical{186.0}=0x0 +phy_chain_tx_polarity_flip_physical{187.0}=0x1 +phy_chain_tx_polarity_flip_physical{188.0}=0x1 +phy_chain_tx_polarity_flip_physical{189.0}=0x1 +phy_chain_tx_polarity_flip_physical{19.0}=0x1 +phy_chain_tx_polarity_flip_physical{190.0}=0x0 +phy_chain_tx_polarity_flip_physical{191.0}=0x1 +phy_chain_tx_polarity_flip_physical{192.0}=0x0 +phy_chain_tx_polarity_flip_physical{193.0}=0x0 +phy_chain_tx_polarity_flip_physical{194.0}=0x0 +phy_chain_tx_polarity_flip_physical{195.0}=0x1 +phy_chain_tx_polarity_flip_physical{196.0}=0x1 +phy_chain_tx_polarity_flip_physical{197.0}=0x0 +phy_chain_tx_polarity_flip_physical{198.0}=0x1 +phy_chain_tx_polarity_flip_physical{199.0}=0x0 +phy_chain_tx_polarity_flip_physical{2.0}=0x1 +phy_chain_tx_polarity_flip_physical{20.0}=0x1 +phy_chain_tx_polarity_flip_physical{200.0}=0x0 +phy_chain_tx_polarity_flip_physical{201.0}=0x0 +phy_chain_tx_polarity_flip_physical{202.0}=0x1 +phy_chain_tx_polarity_flip_physical{203.0}=0x1 +phy_chain_tx_polarity_flip_physical{204.0}=0x1 +phy_chain_tx_polarity_flip_physical{205.0}=0x0 +phy_chain_tx_polarity_flip_physical{206.0}=0x0 +phy_chain_tx_polarity_flip_physical{207.0}=0x1 +phy_chain_tx_polarity_flip_physical{208.0}=0x0 +phy_chain_tx_polarity_flip_physical{209.0}=0x0 +phy_chain_tx_polarity_flip_physical{21.0}=0x1 +phy_chain_tx_polarity_flip_physical{210.0}=0x0 +phy_chain_tx_polarity_flip_physical{211.0}=0x0 +phy_chain_tx_polarity_flip_physical{212.0}=0x1 +phy_chain_tx_polarity_flip_physical{213.0}=0x1 +phy_chain_tx_polarity_flip_physical{214.0}=0x0 +phy_chain_tx_polarity_flip_physical{215.0}=0x0 +phy_chain_tx_polarity_flip_physical{216.0}=0x1 +phy_chain_tx_polarity_flip_physical{217.0}=0x1 +phy_chain_tx_polarity_flip_physical{218.0}=0x1 +phy_chain_tx_polarity_flip_physical{219.0}=0x1 +phy_chain_tx_polarity_flip_physical{22.0}=0x0 +phy_chain_tx_polarity_flip_physical{220.0}=0x0 +phy_chain_tx_polarity_flip_physical{221.0}=0x0 +phy_chain_tx_polarity_flip_physical{222.0}=0x1 +phy_chain_tx_polarity_flip_physical{223.0}=0x1 +phy_chain_tx_polarity_flip_physical{224.0}=0x1 +phy_chain_tx_polarity_flip_physical{225.0}=0x1 +phy_chain_tx_polarity_flip_physical{226.0}=0x0 +phy_chain_tx_polarity_flip_physical{227.0}=0x0 +phy_chain_tx_polarity_flip_physical{228.0}=0x1 +phy_chain_tx_polarity_flip_physical{229.0}=0x0 +phy_chain_tx_polarity_flip_physical{23.0}=0x0 +phy_chain_tx_polarity_flip_physical{230.0}=0x0 +phy_chain_tx_polarity_flip_physical{231.0}=0x1 +phy_chain_tx_polarity_flip_physical{232.0}=0x0 +phy_chain_tx_polarity_flip_physical{233.0}=0x1 +phy_chain_tx_polarity_flip_physical{234.0}=0x0 +phy_chain_tx_polarity_flip_physical{235.0}=0x0 +phy_chain_tx_polarity_flip_physical{236.0}=0x0 +phy_chain_tx_polarity_flip_physical{237.0}=0x1 +phy_chain_tx_polarity_flip_physical{238.0}=0x1 +phy_chain_tx_polarity_flip_physical{239.0}=0x1 +phy_chain_tx_polarity_flip_physical{24.0}=0x0 +phy_chain_tx_polarity_flip_physical{240.0}=0x1 +phy_chain_tx_polarity_flip_physical{241.0}=0x1 +phy_chain_tx_polarity_flip_physical{242.0}=0x0 +phy_chain_tx_polarity_flip_physical{243.0}=0x1 +phy_chain_tx_polarity_flip_physical{244.0}=0x1 +phy_chain_tx_polarity_flip_physical{245.0}=0x1 +phy_chain_tx_polarity_flip_physical{246.0}=0x0 +phy_chain_tx_polarity_flip_physical{247.0}=0x0 +phy_chain_tx_polarity_flip_physical{248.0}=0x1 +phy_chain_tx_polarity_flip_physical{249.0}=0x1 +phy_chain_tx_polarity_flip_physical{25.0}=0x0 +phy_chain_tx_polarity_flip_physical{250.0}=0x1 +phy_chain_tx_polarity_flip_physical{251.0}=0x0 +phy_chain_tx_polarity_flip_physical{252.0}=0x1 +phy_chain_tx_polarity_flip_physical{253.0}=0x1 +phy_chain_tx_polarity_flip_physical{254.0}=0x1 +phy_chain_tx_polarity_flip_physical{255.0}=0x0 +phy_chain_tx_polarity_flip_physical{256.0}=0x1 +phy_chain_tx_polarity_flip_physical{26.0}=0x0 +phy_chain_tx_polarity_flip_physical{27.0}=0x1 +phy_chain_tx_polarity_flip_physical{28.0}=0x1 +phy_chain_tx_polarity_flip_physical{29.0}=0x0 +phy_chain_tx_polarity_flip_physical{3.0}=0x0 +phy_chain_tx_polarity_flip_physical{30.0}=0x1 +phy_chain_tx_polarity_flip_physical{31.0}=0x1 +phy_chain_tx_polarity_flip_physical{32.0}=0x0 +phy_chain_tx_polarity_flip_physical{33.0}=0x0 +phy_chain_tx_polarity_flip_physical{34.0}=0x1 +phy_chain_tx_polarity_flip_physical{35.0}=0x0 +phy_chain_tx_polarity_flip_physical{36.0}=0x1 +phy_chain_tx_polarity_flip_physical{37.0}=0x1 +phy_chain_tx_polarity_flip_physical{38.0}=0x1 +phy_chain_tx_polarity_flip_physical{39.0}=0x0 +phy_chain_tx_polarity_flip_physical{4.0}=0x0 +phy_chain_tx_polarity_flip_physical{40.0}=0x1 +phy_chain_tx_polarity_flip_physical{41.0}=0x0 +phy_chain_tx_polarity_flip_physical{42.0}=0x1 +phy_chain_tx_polarity_flip_physical{43.0}=0x1 +phy_chain_tx_polarity_flip_physical{44.0}=0x1 +phy_chain_tx_polarity_flip_physical{45.0}=0x0 +phy_chain_tx_polarity_flip_physical{46.0}=0x1 +phy_chain_tx_polarity_flip_physical{47.0}=0x1 +phy_chain_tx_polarity_flip_physical{48.0}=0x0 +phy_chain_tx_polarity_flip_physical{49.0}=0x0 +phy_chain_tx_polarity_flip_physical{5.0}=0x0 +phy_chain_tx_polarity_flip_physical{50.0}=0x1 +phy_chain_tx_polarity_flip_physical{51.0}=0x0 +phy_chain_tx_polarity_flip_physical{52.0}=0x1 +phy_chain_tx_polarity_flip_physical{53.0}=0x1 +phy_chain_tx_polarity_flip_physical{54.0}=0x1 +phy_chain_tx_polarity_flip_physical{55.0}=0x1 +phy_chain_tx_polarity_flip_physical{56.0}=0x1 +phy_chain_tx_polarity_flip_physical{57.0}=0x0 +phy_chain_tx_polarity_flip_physical{58.0}=0x1 +phy_chain_tx_polarity_flip_physical{59.0}=0x1 +phy_chain_tx_polarity_flip_physical{6.0}=0x1 +phy_chain_tx_polarity_flip_physical{60.0}=0x0 +phy_chain_tx_polarity_flip_physical{61.0}=0x1 +phy_chain_tx_polarity_flip_physical{62.0}=0x1 +phy_chain_tx_polarity_flip_physical{63.0}=0x1 +phy_chain_tx_polarity_flip_physical{64.0}=0x0 +phy_chain_tx_polarity_flip_physical{65.0}=0x0 +phy_chain_tx_polarity_flip_physical{66.0}=0x1 +phy_chain_tx_polarity_flip_physical{67.0}=0x1 +phy_chain_tx_polarity_flip_physical{68.0}=0x0 +phy_chain_tx_polarity_flip_physical{69.0}=0x1 +phy_chain_tx_polarity_flip_physical{7.0}=0x0 +phy_chain_tx_polarity_flip_physical{70.0}=0x1 +phy_chain_tx_polarity_flip_physical{71.0}=0x0 +phy_chain_tx_polarity_flip_physical{72.0}=0x1 +phy_chain_tx_polarity_flip_physical{73.0}=0x0 +phy_chain_tx_polarity_flip_physical{74.0}=0x1 +phy_chain_tx_polarity_flip_physical{75.0}=0x1 +phy_chain_tx_polarity_flip_physical{76.0}=0x0 +phy_chain_tx_polarity_flip_physical{77.0}=0x1 +phy_chain_tx_polarity_flip_physical{78.0}=0x0 +phy_chain_tx_polarity_flip_physical{79.0}=0x1 +phy_chain_tx_polarity_flip_physical{8.0}=0x1 +phy_chain_tx_polarity_flip_physical{80.0}=0x1 +phy_chain_tx_polarity_flip_physical{81.0}=0x1 +phy_chain_tx_polarity_flip_physical{82.0}=0x1 +phy_chain_tx_polarity_flip_physical{83.0}=0x0 +phy_chain_tx_polarity_flip_physical{84.0}=0x0 +phy_chain_tx_polarity_flip_physical{85.0}=0x1 +phy_chain_tx_polarity_flip_physical{86.0}=0x1 +phy_chain_tx_polarity_flip_physical{87.0}=0x0 +phy_chain_tx_polarity_flip_physical{88.0}=0x0 +phy_chain_tx_polarity_flip_physical{89.0}=0x0 +phy_chain_tx_polarity_flip_physical{9.0}=0x0 +phy_chain_tx_polarity_flip_physical{90.0}=0x1 +phy_chain_tx_polarity_flip_physical{91.0}=0x1 +phy_chain_tx_polarity_flip_physical{92.0}=0x0 +phy_chain_tx_polarity_flip_physical{93.0}=0x1 +phy_chain_tx_polarity_flip_physical{94.0}=0x0 +phy_chain_tx_polarity_flip_physical{95.0}=0x1 +phy_chain_tx_polarity_flip_physical{96.0}=0x0 +phy_chain_tx_polarity_flip_physical{97.0}=0x1 +phy_chain_tx_polarity_flip_physical{98.0}=0x0 +phy_chain_tx_polarity_flip_physical{99.0}=0x1 +portmap_100=259:10 +portmap_101=262:10 +portmap_102=193:100 +portmap_103=197:100 +portmap_104=201:100 +portmap_105=205:100 +portmap_106=209:100 +portmap_107=213:100 +portmap_108=217:100 +portmap_109=221:100 +portmap_10=37:100 +portmap_110=225:100 +portmap_111=229:100 +portmap_112=233:100 +portmap_113=237:100 +portmap_114=241:100 +portmap_115=245:100 +portmap_116=249:100 +portmap_117=253:100 +portmap_11=41:100 +portmap_12=45:100 +portmap_135=263:10 +portmap_13=49:100 +portmap_14=53:100 +portmap_15=57:100 +portmap_16=61:100 +portmap_1=1:100 +portmap_2=5:100 +portmap_33=260:10 +portmap_34=65:100 +portmap_35=69:100 +portmap_36=73:100 +portmap_37=77:100 +portmap_38=81:100 +portmap_39=85:100 +portmap_3=9:100 +portmap_40=89:100 +portmap_41=93:100 +portmap_42=97:100 +portmap_43=101:100 +portmap_44=105:100 +portmap_45=109:100 +portmap_46=113:100 +portmap_47=117:100 +portmap_48=121:100 +portmap_49=125:100 +portmap_4=13:100 +portmap_5=17:100 +portmap_66=257:10 +portmap_67=261:10 +portmap_68=129:100 +portmap_69=133:100 +portmap_6=21:100 +portmap_70=137:100 +portmap_71=141:100 +portmap_72=145:100 +portmap_73=149:100 +portmap_74=153:100 +portmap_75=157:100 +portmap_76=161:100 +portmap_77=165:100 +portmap_78=169:100 +portmap_79=173:100 +portmap_7=25:100 +portmap_80=177:100 +portmap_81=181:100 +portmap_82=185:100 +portmap_83=189:100 +portmap_8=29:100 +portmap_9=33:100 + +lpm_scaling_enable=0 +bcm_num_cos=8 +bcm_stat_jumbo=9236 +ipv6_lpm_128b_enable=1 +max_vp_lags=0 +miim_intr_enable=0 +module_64ports=1 +phy_an_allow_pll_change_hg=0 +robust_hash_disable_egress_vlan=1 +robust_hash_disable_mpls=1 +robust_hash_disable_vlan=1 +scache_filename=/tmp/scache +sram_scan_enable=0 +stable_size=0x5500000 +mmu_lossless=1 diff --git a/device/facebook/x86_64-facebook_wedge100-r0/Facebook-W100-C32/sai.profile b/device/facebook/x86_64-facebook_wedge100-r0/Facebook-W100-C32/sai.profile index 5c93f84deb0b..b5586b7ba24c 100644 --- a/device/facebook/x86_64-facebook_wedge100-r0/Facebook-W100-C32/sai.profile +++ b/device/facebook/x86_64-facebook_wedge100-r0/Facebook-W100-C32/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-wedge100-32x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-wedge100-32x100G.config.bcm diff --git a/device/facebook/x86_64-facebook_wedge100-r0/Facebook-W100-C32/th-wedge100-32x100G.config.bcm b/device/facebook/x86_64-facebook_wedge100-r0/Facebook-W100-C32/th-wedge100-32x100G.config.bcm new file mode 100644 index 000000000000..afd1db4cbc02 --- /dev/null +++ b/device/facebook/x86_64-facebook_wedge100-r0/Facebook-W100-C32/th-wedge100-32x100G.config.bcm @@ -0,0 +1,433 @@ +ctr_evict_enable=0x0 +l2_mem_entries=0x8000 +l3_intf_vlan_split_egress=0x1 +l3_mem_entries=0x4000 +mdio_output_delay=0xb +mmu_lossless=0x0 +os=unix +oversubscribe_mode=0x1 +parity_enable=0x1 +pbmp_xport_xe=0x1fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffe +phy_an_c37=0x3 +phy_an_c73=0x0 +portmap_1=5:100 +portmap_102=101:100 +portmap_106=97:100 +portmap_110=109:100 +portmap_114=105:100 +portmap_118=117:100 +portmap_122=113:100 +portmap_126=125:100 +portmap_13=9:100 +portmap_130=121:100 +portmap_17=21:100 +portmap_21=17:100 +portmap_25=29:100 +portmap_29=25:100 +portmap_34=37:100 +portmap_38=33:100 +portmap_42=45:100 +portmap_46=41:100 +portmap_5=1:100 +portmap_50=53:100 +portmap_54=49:100 +portmap_58=61:100 +portmap_62=57:100 +portmap_68=69:100 +portmap_72=65:100 +portmap_76=77:100 +portmap_80=73:100 +portmap_84=85:100 +portmap_88=81:100 +portmap_9=13:100 +portmap_92=93:100 +portmap_96=89:100 +rate_ext_mdio_divisor=0x65 +serdes_automedium=0x0 +serdes_fiber_pref=0x1 +serdes_firmware_mode_xe=0x2 +serdes_preemphasis_1=0x284008 +serdes_preemphasis_10=0x284008 +serdes_preemphasis_102=0x2c4004 +serdes_preemphasis_103=0x2c4004 +serdes_preemphasis_104=0x2c4004 +serdes_preemphasis_105=0x2c4004 +serdes_preemphasis_106=0x2c4004 +serdes_preemphasis_107=0x2c4004 +serdes_preemphasis_108=0x2c4004 +serdes_preemphasis_109=0x2c4004 +serdes_preemphasis_11=0x284008 +serdes_preemphasis_110=0x303c04 +serdes_preemphasis_111=0x303c04 +serdes_preemphasis_112=0x303c04 +serdes_preemphasis_113=0x303c04 +serdes_preemphasis_114=0x303c04 +serdes_preemphasis_115=0x303c04 +serdes_preemphasis_116=0x303c04 +serdes_preemphasis_117=0x303c04 +serdes_preemphasis_118=0x2c4004 +serdes_preemphasis_119=0x2c4004 +serdes_preemphasis_12=0x284008 +serdes_preemphasis_120=0x2c4004 +serdes_preemphasis_121=0x2c4004 +serdes_preemphasis_122=0x303c04 +serdes_preemphasis_123=0x303c04 +serdes_preemphasis_124=0x303c04 +serdes_preemphasis_125=0x303c04 +serdes_preemphasis_126=0x2c4004 +serdes_preemphasis_127=0x2c4004 +serdes_preemphasis_128=0x2c4004 +serdes_preemphasis_129=0x2c4004 +serdes_preemphasis_13=0x284008 +serdes_preemphasis_130=0x2c4004 +serdes_preemphasis_131=0x2c4004 +serdes_preemphasis_132=0x2c4004 +serdes_preemphasis_133=0x2c4004 +serdes_preemphasis_14=0x284008 +serdes_preemphasis_15=0x284008 +serdes_preemphasis_16=0x284008 +serdes_preemphasis_17=0x205000 +serdes_preemphasis_18=0x205000 +serdes_preemphasis_19=0x205000 +serdes_preemphasis_2=0x284008 +serdes_preemphasis_20=0x205000 +serdes_preemphasis_21=0x284800 +serdes_preemphasis_22=0x284800 +serdes_preemphasis_23=0x284800 +serdes_preemphasis_24=0x284800 +serdes_preemphasis_25=0x205000 +serdes_preemphasis_26=0x205000 +serdes_preemphasis_27=0x205000 +serdes_preemphasis_28=0x205000 +serdes_preemphasis_29=0x205000 +serdes_preemphasis_3=0x284008 +serdes_preemphasis_30=0x205000 +serdes_preemphasis_31=0x205000 +serdes_preemphasis_32=0x205000 +serdes_preemphasis_34=0x205000 +serdes_preemphasis_35=0x205000 +serdes_preemphasis_36=0x205000 +serdes_preemphasis_37=0x205000 +serdes_preemphasis_38=0x205000 +serdes_preemphasis_39=0x205000 +serdes_preemphasis_4=0x284008 +serdes_preemphasis_40=0x205000 +serdes_preemphasis_41=0x205000 +serdes_preemphasis_42=0x205000 +serdes_preemphasis_43=0x205000 +serdes_preemphasis_44=0x205000 +serdes_preemphasis_45=0x205000 +serdes_preemphasis_46=0x205000 +serdes_preemphasis_47=0x205000 +serdes_preemphasis_48=0x205000 +serdes_preemphasis_49=0x205000 +serdes_preemphasis_5=0x284008 +serdes_preemphasis_50=0x205000 +serdes_preemphasis_51=0x205000 +serdes_preemphasis_52=0x205000 +serdes_preemphasis_53=0x205000 +serdes_preemphasis_54=0x205000 +serdes_preemphasis_55=0x205000 +serdes_preemphasis_56=0x205000 +serdes_preemphasis_57=0x205000 +serdes_preemphasis_58=0x205000 +serdes_preemphasis_59=0x205000 +serdes_preemphasis_6=0x284008 +serdes_preemphasis_60=0x205000 +serdes_preemphasis_61=0x205000 +serdes_preemphasis_62=0x205000 +serdes_preemphasis_63=0x205000 +serdes_preemphasis_64=0x205000 +serdes_preemphasis_65=0x205000 +serdes_preemphasis_68=0x205000 +serdes_preemphasis_69=0x205000 +serdes_preemphasis_7=0x284008 +serdes_preemphasis_70=0x205000 +serdes_preemphasis_71=0x205000 +serdes_preemphasis_72=0x205000 +serdes_preemphasis_73=0x205000 +serdes_preemphasis_74=0x205000 +serdes_preemphasis_75=0x205000 +serdes_preemphasis_76=0x284800 +serdes_preemphasis_77=0x284800 +serdes_preemphasis_78=0x284800 +serdes_preemphasis_79=0x284800 +serdes_preemphasis_8=0x284008 +serdes_preemphasis_80=0x205000 +serdes_preemphasis_81=0x205000 +serdes_preemphasis_82=0x205000 +serdes_preemphasis_83=0x205000 +serdes_preemphasis_84=0x284800 +serdes_preemphasis_85=0x284800 +serdes_preemphasis_86=0x284800 +serdes_preemphasis_87=0x284800 +serdes_preemphasis_88=0x284800 +serdes_preemphasis_89=0x284800 +serdes_preemphasis_9=0x284008 +serdes_preemphasis_90=0x284800 +serdes_preemphasis_91=0x284800 +serdes_preemphasis_92=0x284800 +serdes_preemphasis_93=0x284800 +serdes_preemphasis_94=0x284800 +serdes_preemphasis_95=0x284800 +serdes_preemphasis_96=0x284800 +serdes_preemphasis_97=0x284800 +serdes_preemphasis_98=0x284800 +serdes_preemphasis_99=0x284800 +stable_size=0x6000000 +xgxs_rx_lane_map_1=0x3210 +xgxs_rx_lane_map_10=0x3210 +xgxs_rx_lane_map_102=0x123 +xgxs_rx_lane_map_103=0x123 +xgxs_rx_lane_map_104=0x123 +xgxs_rx_lane_map_105=0x123 +xgxs_rx_lane_map_106=0x3210 +xgxs_rx_lane_map_107=0x3210 +xgxs_rx_lane_map_108=0x3210 +xgxs_rx_lane_map_109=0x3210 +xgxs_rx_lane_map_11=0x3210 +xgxs_rx_lane_map_110=0x1032 +xgxs_rx_lane_map_111=0x1032 +xgxs_rx_lane_map_112=0x1032 +xgxs_rx_lane_map_113=0x1032 +xgxs_rx_lane_map_114=0x3210 +xgxs_rx_lane_map_115=0x3210 +xgxs_rx_lane_map_116=0x3210 +xgxs_rx_lane_map_117=0x3210 +xgxs_rx_lane_map_118=0x2301 +xgxs_rx_lane_map_119=0x2301 +xgxs_rx_lane_map_12=0x3210 +xgxs_rx_lane_map_120=0x2301 +xgxs_rx_lane_map_121=0x2301 +xgxs_rx_lane_map_122=0x3210 +xgxs_rx_lane_map_123=0x3210 +xgxs_rx_lane_map_124=0x3210 +xgxs_rx_lane_map_125=0x3210 +xgxs_rx_lane_map_126=0x1032 +xgxs_rx_lane_map_127=0x1032 +xgxs_rx_lane_map_128=0x1032 +xgxs_rx_lane_map_129=0x1032 +xgxs_rx_lane_map_13=0x3210 +xgxs_rx_lane_map_130=0x3210 +xgxs_rx_lane_map_131=0x3210 +xgxs_rx_lane_map_132=0x3210 +xgxs_rx_lane_map_133=0x3210 +xgxs_rx_lane_map_14=0x3210 +xgxs_rx_lane_map_15=0x3210 +xgxs_rx_lane_map_16=0x3210 +xgxs_rx_lane_map_17=0x2301 +xgxs_rx_lane_map_18=0x2301 +xgxs_rx_lane_map_19=0x2301 +xgxs_rx_lane_map_2=0x3210 +xgxs_rx_lane_map_20=0x2301 +xgxs_rx_lane_map_21=0x1032 +xgxs_rx_lane_map_22=0x1032 +xgxs_rx_lane_map_23=0x1032 +xgxs_rx_lane_map_24=0x1032 +xgxs_rx_lane_map_25=0x3210 +xgxs_rx_lane_map_26=0x3210 +xgxs_rx_lane_map_27=0x3210 +xgxs_rx_lane_map_28=0x3210 +xgxs_rx_lane_map_29=0x1032 +xgxs_rx_lane_map_3=0x3210 +xgxs_rx_lane_map_30=0x1032 +xgxs_rx_lane_map_31=0x1032 +xgxs_rx_lane_map_32=0x1032 +xgxs_rx_lane_map_34=0x2301 +xgxs_rx_lane_map_35=0x2301 +xgxs_rx_lane_map_36=0x2301 +xgxs_rx_lane_map_37=0x2301 +xgxs_rx_lane_map_38=0x1032 +xgxs_rx_lane_map_39=0x1032 +xgxs_rx_lane_map_4=0x3210 +xgxs_rx_lane_map_40=0x1032 +xgxs_rx_lane_map_41=0x1032 +xgxs_rx_lane_map_42=0x3210 +xgxs_rx_lane_map_43=0x3210 +xgxs_rx_lane_map_44=0x3210 +xgxs_rx_lane_map_45=0x3210 +xgxs_rx_lane_map_46=0x1032 +xgxs_rx_lane_map_47=0x1032 +xgxs_rx_lane_map_48=0x1032 +xgxs_rx_lane_map_49=0x1032 +xgxs_rx_lane_map_5=0x3210 +xgxs_rx_lane_map_50=0x1032 +xgxs_rx_lane_map_51=0x1032 +xgxs_rx_lane_map_52=0x1032 +xgxs_rx_lane_map_53=0x1032 +xgxs_rx_lane_map_54=0x1032 +xgxs_rx_lane_map_55=0x1032 +xgxs_rx_lane_map_56=0x1032 +xgxs_rx_lane_map_57=0x1032 +xgxs_rx_lane_map_58=0x1032 +xgxs_rx_lane_map_59=0x1032 +xgxs_rx_lane_map_6=0x3210 +xgxs_rx_lane_map_60=0x1032 +xgxs_rx_lane_map_61=0x1032 +xgxs_rx_lane_map_62=0x1032 +xgxs_rx_lane_map_63=0x1032 +xgxs_rx_lane_map_64=0x1032 +xgxs_rx_lane_map_65=0x1032 +xgxs_rx_lane_map_68=0x1032 +xgxs_rx_lane_map_69=0x1032 +xgxs_rx_lane_map_7=0x3210 +xgxs_rx_lane_map_70=0x1032 +xgxs_rx_lane_map_71=0x1032 +xgxs_rx_lane_map_72=0x3210 +xgxs_rx_lane_map_73=0x3210 +xgxs_rx_lane_map_74=0x3210 +xgxs_rx_lane_map_75=0x3210 +xgxs_rx_lane_map_76=0x213 +xgxs_rx_lane_map_77=0x213 +xgxs_rx_lane_map_78=0x213 +xgxs_rx_lane_map_79=0x213 +xgxs_rx_lane_map_8=0x3210 +xgxs_rx_lane_map_80=0x1032 +xgxs_rx_lane_map_81=0x1032 +xgxs_rx_lane_map_82=0x1032 +xgxs_rx_lane_map_83=0x1032 +xgxs_rx_lane_map_84=0x123 +xgxs_rx_lane_map_85=0x123 +xgxs_rx_lane_map_86=0x123 +xgxs_rx_lane_map_87=0x123 +xgxs_rx_lane_map_88=0x3210 +xgxs_rx_lane_map_89=0x3210 +xgxs_rx_lane_map_9=0x3210 +xgxs_rx_lane_map_90=0x3210 +xgxs_rx_lane_map_91=0x3210 +xgxs_rx_lane_map_92=0x1032 +xgxs_rx_lane_map_93=0x1032 +xgxs_rx_lane_map_94=0x1032 +xgxs_rx_lane_map_95=0x1032 +xgxs_rx_lane_map_96=0x3210 +xgxs_rx_lane_map_97=0x3210 +xgxs_rx_lane_map_98=0x3210 +xgxs_rx_lane_map_99=0x3210 +xgxs_tx_lane_map_1=0x3210 +xgxs_tx_lane_map_10=0x3210 +xgxs_tx_lane_map_102=0x3210 +xgxs_tx_lane_map_103=0x3210 +xgxs_tx_lane_map_104=0x3210 +xgxs_tx_lane_map_105=0x3210 +xgxs_tx_lane_map_106=0x1032 +xgxs_tx_lane_map_107=0x1032 +xgxs_tx_lane_map_108=0x1032 +xgxs_tx_lane_map_109=0x1032 +xgxs_tx_lane_map_11=0x3210 +xgxs_tx_lane_map_110=0x3210 +xgxs_tx_lane_map_111=0x3210 +xgxs_tx_lane_map_112=0x3210 +xgxs_tx_lane_map_113=0x3210 +xgxs_tx_lane_map_114=0x1032 +xgxs_tx_lane_map_115=0x1032 +xgxs_tx_lane_map_116=0x1032 +xgxs_tx_lane_map_117=0x1032 +xgxs_tx_lane_map_118=0x3210 +xgxs_tx_lane_map_119=0x3210 +xgxs_tx_lane_map_12=0x3210 +xgxs_tx_lane_map_120=0x3210 +xgxs_tx_lane_map_121=0x3210 +xgxs_tx_lane_map_122=0x1032 +xgxs_tx_lane_map_123=0x1032 +xgxs_tx_lane_map_124=0x1032 +xgxs_tx_lane_map_125=0x1032 +xgxs_tx_lane_map_126=0x1032 +xgxs_tx_lane_map_127=0x1032 +xgxs_tx_lane_map_128=0x1032 +xgxs_tx_lane_map_129=0x1032 +xgxs_tx_lane_map_13=0x3210 +xgxs_tx_lane_map_130=0x3210 +xgxs_tx_lane_map_131=0x3210 +xgxs_tx_lane_map_132=0x3210 +xgxs_tx_lane_map_133=0x3210 +xgxs_tx_lane_map_14=0x3210 +xgxs_tx_lane_map_15=0x3210 +xgxs_tx_lane_map_16=0x3210 +xgxs_tx_lane_map_17=0x1032 +xgxs_tx_lane_map_18=0x1032 +xgxs_tx_lane_map_19=0x1032 +xgxs_tx_lane_map_2=0x3210 +xgxs_tx_lane_map_20=0x1032 +xgxs_tx_lane_map_21=0x3210 +xgxs_tx_lane_map_22=0x3210 +xgxs_tx_lane_map_23=0x3210 +xgxs_tx_lane_map_24=0x3210 +xgxs_tx_lane_map_25=0x1032 +xgxs_tx_lane_map_26=0x1032 +xgxs_tx_lane_map_27=0x1032 +xgxs_tx_lane_map_28=0x1032 +xgxs_tx_lane_map_29=0x3210 +xgxs_tx_lane_map_3=0x3210 +xgxs_tx_lane_map_30=0x3210 +xgxs_tx_lane_map_31=0x3210 +xgxs_tx_lane_map_32=0x3210 +xgxs_tx_lane_map_34=0x1032 +xgxs_tx_lane_map_35=0x1032 +xgxs_tx_lane_map_36=0x1032 +xgxs_tx_lane_map_37=0x1032 +xgxs_tx_lane_map_38=0x3210 +xgxs_tx_lane_map_39=0x3210 +xgxs_tx_lane_map_4=0x3210 +xgxs_tx_lane_map_40=0x3210 +xgxs_tx_lane_map_41=0x3210 +xgxs_tx_lane_map_42=0x1032 +xgxs_tx_lane_map_43=0x1032 +xgxs_tx_lane_map_44=0x1032 +xgxs_tx_lane_map_45=0x1032 +xgxs_tx_lane_map_46=0x3210 +xgxs_tx_lane_map_47=0x3210 +xgxs_tx_lane_map_48=0x3210 +xgxs_tx_lane_map_49=0x3210 +xgxs_tx_lane_map_5=0x3210 +xgxs_tx_lane_map_50=0x1032 +xgxs_tx_lane_map_51=0x1032 +xgxs_tx_lane_map_52=0x1032 +xgxs_tx_lane_map_53=0x1032 +xgxs_tx_lane_map_54=0x1032 +xgxs_tx_lane_map_55=0x1032 +xgxs_tx_lane_map_56=0x1032 +xgxs_tx_lane_map_57=0x1032 +xgxs_tx_lane_map_58=0x1032 +xgxs_tx_lane_map_59=0x1032 +xgxs_tx_lane_map_6=0x3210 +xgxs_tx_lane_map_60=0x1032 +xgxs_tx_lane_map_61=0x1032 +xgxs_tx_lane_map_62=0x1032 +xgxs_tx_lane_map_63=0x1032 +xgxs_tx_lane_map_64=0x1032 +xgxs_tx_lane_map_65=0x1032 +xgxs_tx_lane_map_68=0x1032 +xgxs_tx_lane_map_69=0x1032 +xgxs_tx_lane_map_7=0x3210 +xgxs_tx_lane_map_70=0x1032 +xgxs_tx_lane_map_71=0x1032 +xgxs_tx_lane_map_72=0x3210 +xgxs_tx_lane_map_73=0x3210 +xgxs_tx_lane_map_74=0x3210 +xgxs_tx_lane_map_75=0x3210 +xgxs_tx_lane_map_76=0x3210 +xgxs_tx_lane_map_77=0x3210 +xgxs_tx_lane_map_78=0x3210 +xgxs_tx_lane_map_79=0x3210 +xgxs_tx_lane_map_8=0x3210 +xgxs_tx_lane_map_80=0x1032 +xgxs_tx_lane_map_81=0x1032 +xgxs_tx_lane_map_82=0x1032 +xgxs_tx_lane_map_83=0x1032 +xgxs_tx_lane_map_84=0x3210 +xgxs_tx_lane_map_85=0x3210 +xgxs_tx_lane_map_86=0x3210 +xgxs_tx_lane_map_87=0x3210 +xgxs_tx_lane_map_88=0x1032 +xgxs_tx_lane_map_89=0x1032 +xgxs_tx_lane_map_9=0x3210 +xgxs_tx_lane_map_90=0x1032 +xgxs_tx_lane_map_91=0x1032 +xgxs_tx_lane_map_92=0x3210 +xgxs_tx_lane_map_93=0x3210 +xgxs_tx_lane_map_94=0x3210 +xgxs_tx_lane_map_95=0x3210 +xgxs_tx_lane_map_96=0x1032 +xgxs_tx_lane_map_97=0x1032 +xgxs_tx_lane_map_98=0x1032 +xgxs_tx_lane_map_99=0x1032 diff --git a/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/sai.profile b/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/sai.profile index 3fdcc3f1a506..42315ee4ea6a 100644 --- a/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/sai.profile +++ b/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/td2-s8810-32x40G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/td2-s8810-32x40G.config.bcm diff --git a/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/td2-s8810-32x40G.config.bcm b/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/td2-s8810-32x40G.config.bcm new file mode 100644 index 000000000000..daa4b7a7ed24 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s8810_32q-r0/INGRASYS-S8810-32Q/td2-s8810-32x40G.config.bcm @@ -0,0 +1,474 @@ +#2017/09/12 +os=unix + +module_64ports=0 +scache_filename=/tmp/scache +schan_intr_enable=0 +stable_size=0x2000000 + +pbmp_xport_xe=0x000007fffffffffffffffffffffffffe +pbmp_oversubscribe=0x000007fffffffffffffffffffffffffe + +# ALPM enable +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +l2_mem_entries=32768 +l3_mem_entries=16384 + +l2xmsg_mode=1 +mmu_lossless=0 + +#Parity +parity_correction=1 +parity_enable=1 + +portmap_1=37:40 +portmap_2=33:40 +portmap_3=45:40 +portmap_4=41:40 +portmap_5=53:40 +portmap_6=49:40 +portmap_7=61:40 +portmap_8=57:40 +portmap_9=69:40 +portmap_10=65:40 +portmap_11=77:40 +portmap_12=73:40 +portmap_13=85:40 +portmap_14=81:40 +portmap_15=93:40 +portmap_16=89:40 +portmap_17=101:40 +portmap_18=97:40 +portmap_19=109:40 +portmap_20=105:40 +portmap_21=117:40 +portmap_22=113:40 +portmap_23=125:40 +portmap_24=121:40 +portmap_25=5:40 +portmap_26=1:40 +portmap_27=13:40 +portmap_28=9:40 +portmap_29=21:40 +portmap_30=17:40 +portmap_31=29:40 +portmap_32=25:40 + +serdes_driver_current_lane0_xe0=0x6 +serdes_driver_current_lane1_xe0=0x6 +serdes_driver_current_lane2_xe0=0x6 +serdes_driver_current_lane3_xe0=0x7 +serdes_pre_driver_current_lane0_xe0=0x6 +serdes_pre_driver_current_lane1_xe0=0x6 +serdes_pre_driver_current_lane2_xe0=0x6 +serdes_pre_driver_current_lane3_xe0=0x7 +serdes_preemphasis_lane0_xe0=0xc2f0 +serdes_preemphasis_lane1_xe0=0xcf20 +serdes_preemphasis_lane2_xe0=0xc2f0 +serdes_preemphasis_lane3_xe0=0xc2f0 + +serdes_driver_current_lane0_xe1=0x8 +serdes_driver_current_lane1_xe1=0x8 +serdes_driver_current_lane2_xe1=0x8 +serdes_driver_current_lane3_xe1=0x8 +serdes_pre_driver_current_lane0_xe1=0x8 +serdes_pre_driver_current_lane1_xe1=0x8 +serdes_pre_driver_current_lane2_xe1=0x8 +serdes_pre_driver_current_lane3_xe1=0x8 +serdes_preemphasis_lane0_xe1=0xc6e0 +serdes_preemphasis_lane1_xe1=0xc6e0 +serdes_preemphasis_lane2_xe1=0xc6e0 +serdes_preemphasis_lane3_xe1=0xc6e0 + +serdes_driver_current_lane0_xe2=0x5 +serdes_driver_current_lane1_xe2=0x3 +serdes_driver_current_lane2_xe2=0x3 +serdes_driver_current_lane3_xe2=0x3 +serdes_pre_driver_current_lane0_xe2=0x5 +serdes_pre_driver_current_lane1_xe2=0x3 +serdes_pre_driver_current_lane2_xe2=0x3 +serdes_pre_driver_current_lane3_xe2=0x3 +serdes_preemphasis_lane0_xe2=0x9b90 +serdes_preemphasis_lane1_xe2=0x9f80 +serdes_preemphasis_lane2_xe2=0x9b90 +serdes_preemphasis_lane3_xe2=0x9b90 + +serdes_driver_current_lane0_xe3=0x5 +serdes_driver_current_lane1_xe3=0x5 +serdes_driver_current_lane2_xe3=0x5 +serdes_driver_current_lane3_xe3=0x5 +serdes_pre_driver_current_lane0_xe3=0x5 +serdes_pre_driver_current_lane1_xe3=0x5 +serdes_pre_driver_current_lane2_xe3=0x5 +serdes_pre_driver_current_lane3_xe3=0x5 +serdes_preemphasis_lane0_xe3=0x9b90 +serdes_preemphasis_lane1_xe3=0x9b90 +serdes_preemphasis_lane2_xe3=0x9b90 +serdes_preemphasis_lane3_xe3=0x9b90 + +serdes_driver_current_lane0_xe4=0x3 +serdes_driver_current_lane1_xe4=0x3 +serdes_driver_current_lane2_xe4=0x3 +serdes_driver_current_lane3_xe4=0x3 +serdes_pre_driver_current_lane0_xe4=0x3 +serdes_pre_driver_current_lane1_xe4=0x3 +serdes_pre_driver_current_lane2_xe4=0x3 +serdes_pre_driver_current_lane3_xe4=0x3 +serdes_preemphasis_lane0_xe4=0x93b0 +serdes_preemphasis_lane1_xe4=0x97a0 +serdes_preemphasis_lane2_xe4=0x9b90 +serdes_preemphasis_lane3_xe4=0x9b90 + +serdes_driver_current_lane0_xe5=0x3 +serdes_driver_current_lane1_xe5=0x3 +serdes_driver_current_lane2_xe5=0x3 +serdes_driver_current_lane3_xe5=0x3 +serdes_pre_driver_current_lane0_xe5=0x3 +serdes_pre_driver_current_lane1_xe5=0x3 +serdes_pre_driver_current_lane2_xe5=0x3 +serdes_pre_driver_current_lane3_xe5=0x3 +serdes_preemphasis_lane0_xe5=0x9b90 +serdes_preemphasis_lane1_xe5=0x9b90 +serdes_preemphasis_lane2_xe5=0x9b90 +serdes_preemphasis_lane3_xe5=0x9b90 + +serdes_driver_current_lane0_xe6=0x1 +serdes_driver_current_lane1_xe6=0x1 +serdes_driver_current_lane2_xe6=0x1 +serdes_driver_current_lane3_xe6=0x1 +serdes_pre_driver_current_lane0_xe6=0x1 +serdes_pre_driver_current_lane1_xe6=0x1 +serdes_pre_driver_current_lane2_xe6=0x1 +serdes_pre_driver_current_lane3_xe6=0x1 +serdes_preemphasis_lane0_xe6=0xa760 +serdes_preemphasis_lane1_xe6=0xc2f0 +serdes_preemphasis_lane2_xe6=0xa760 +serdes_preemphasis_lane3_xe6=0xa760 + +serdes_driver_current_lane0_xe7=0x1 +serdes_driver_current_lane1_xe7=0x1 +serdes_driver_current_lane2_xe7=0x1 +serdes_driver_current_lane3_xe7=0x1 +serdes_pre_driver_current_lane0_xe7=0x0 +serdes_pre_driver_current_lane1_xe7=0x0 +serdes_pre_driver_current_lane2_xe7=0x0 +serdes_pre_driver_current_lane3_xe7=0x0 +serdes_preemphasis_lane0_xe7=0xa760 +serdes_preemphasis_lane1_xe7=0xa760 +serdes_preemphasis_lane2_xe7=0xa760 +serdes_preemphasis_lane3_xe7=0xa760 + +serdes_driver_current_lane0_xe8=0x1 +serdes_driver_current_lane1_xe8=0x1 +serdes_driver_current_lane2_xe8=0x1 +serdes_driver_current_lane3_xe8=0x0 +serdes_pre_driver_current_lane0_xe8=0x0 +serdes_pre_driver_current_lane1_xe8=0x0 +serdes_pre_driver_current_lane2_xe8=0x0 +serdes_pre_driver_current_lane3_xe8=0x0 +serdes_preemphasis_lane0_xe8=0xa760 +serdes_preemphasis_lane1_xe8=0xa760 +serdes_preemphasis_lane2_xe8=0xa760 +serdes_preemphasis_lane3_xe8=0xa760 + +serdes_driver_current_lane0_xe9=0x1 +serdes_driver_current_lane1_xe9=0x1 +serdes_driver_current_lane2_xe9=0x1 +serdes_driver_current_lane3_xe9=0x1 +serdes_pre_driver_current_lane0_xe9=0x0 +serdes_pre_driver_current_lane1_xe9=0x0 +serdes_pre_driver_current_lane2_xe9=0x0 +serdes_pre_driver_current_lane3_xe9=0x0 +serdes_preemphasis_lane0_xe9=0xa760 +serdes_preemphasis_lane1_xe9=0xa760 +serdes_preemphasis_lane2_xe9=0xa760 +serdes_preemphasis_lane3_xe9=0xa760 + +serdes_driver_current_lane0_xe10=0x1 +serdes_driver_current_lane1_xe10=0x1 +serdes_driver_current_lane2_xe10=0x1 +serdes_driver_current_lane3_xe10=0x1 +serdes_pre_driver_current_lane0_xe10=0x0 +serdes_pre_driver_current_lane1_xe10=0x0 +serdes_pre_driver_current_lane2_xe10=0x0 +serdes_pre_driver_current_lane3_xe10=0x0 +serdes_preemphasis_lane0_xe10=0xa760 +serdes_preemphasis_lane1_xe10=0xa760 +serdes_preemphasis_lane2_xe10=0xa760 +serdes_preemphasis_lane3_xe10=0xa760 + +serdes_driver_current_lane0_xe11=0x1 +serdes_driver_current_lane1_xe11=0x1 +serdes_driver_current_lane2_xe11=0x1 +serdes_driver_current_lane3_xe11=0x1 +serdes_pre_driver_current_lane0_xe11=0x1 +serdes_pre_driver_current_lane1_xe11=0x0 +serdes_pre_driver_current_lane2_xe11=0x1 +serdes_pre_driver_current_lane3_xe11=0x0 +serdes_preemphasis_lane0_xe11=0xa760 +serdes_preemphasis_lane1_xe11=0xa760 +serdes_preemphasis_lane2_xe11=0xa760 +serdes_preemphasis_lane3_xe11=0xa760 + +serdes_driver_current_lane0_xe12=0x1 +serdes_driver_current_lane1_xe12=0x1 +serdes_driver_current_lane2_xe12=0x1 +serdes_driver_current_lane3_xe12=0x1 +serdes_pre_driver_current_lane0_xe12=0x0 +serdes_pre_driver_current_lane1_xe12=0x0 +serdes_pre_driver_current_lane2_xe12=0x0 +serdes_pre_driver_current_lane3_xe12=0x0 +serdes_preemphasis_lane0_xe12=0xa760 +serdes_preemphasis_lane1_xe12=0xa760 +serdes_preemphasis_lane2_xe12=0xa760 +serdes_preemphasis_lane3_xe12=0xa760 + +serdes_driver_current_lane0_xe13=0x1 +serdes_driver_current_lane1_xe13=0x1 +serdes_driver_current_lane2_xe13=0x1 +serdes_driver_current_lane3_xe13=0x1 +serdes_pre_driver_current_lane0_xe13=0x1 +serdes_pre_driver_current_lane1_xe13=0x1 +serdes_pre_driver_current_lane2_xe13=0x1 +serdes_pre_driver_current_lane3_xe13=0x0 +serdes_preemphasis_lane0_xe13=0xa760 +serdes_preemphasis_lane1_xe13=0xa760 +serdes_preemphasis_lane2_xe13=0xa760 +serdes_preemphasis_lane3_xe13=0xa760 + +serdes_driver_current_lane0_xe14=0x3 +serdes_driver_current_lane1_xe14=0x3 +serdes_driver_current_lane2_xe14=0x3 +serdes_driver_current_lane3_xe14=0x3 +serdes_pre_driver_current_lane0_xe14=0x3 +serdes_pre_driver_current_lane1_xe14=0x3 +serdes_pre_driver_current_lane2_xe14=0x3 +serdes_pre_driver_current_lane3_xe14=0x3 +serdes_preemphasis_lane0_xe14=0xaf40 +serdes_preemphasis_lane1_xe14=0xab50 +serdes_preemphasis_lane2_xe14=0xaf40 +serdes_preemphasis_lane3_xe14=0xaf40 + +serdes_driver_current_lane0_xe15=0x3 +serdes_driver_current_lane1_xe15=0x3 +serdes_driver_current_lane2_xe15=0x3 +serdes_driver_current_lane3_xe15=0x3 +serdes_pre_driver_current_lane0_xe15=0x3 +serdes_pre_driver_current_lane1_xe15=0x3 +serdes_pre_driver_current_lane2_xe15=0x3 +serdes_pre_driver_current_lane3_xe15=0x3 +serdes_preemphasis_lane0_xe15=0xaf40 +serdes_preemphasis_lane1_xe15=0xaf40 +serdes_preemphasis_lane2_xe15=0xab50 +serdes_preemphasis_lane3_xe15=0xab50 + +serdes_driver_current_lane0_xe16=0x0 +serdes_driver_current_lane1_xe16=0x1 +serdes_driver_current_lane2_xe16=0x1 +serdes_driver_current_lane3_xe16=0x1 +serdes_pre_driver_current_lane0_xe16=0x0 +serdes_pre_driver_current_lane1_xe16=0x1 +serdes_pre_driver_current_lane2_xe16=0x1 +serdes_pre_driver_current_lane3_xe16=0x1 +serdes_preemphasis_lane0_xe16=0xa760 +serdes_preemphasis_lane1_xe16=0xa760 +serdes_preemphasis_lane2_xe16=0xa760 +serdes_preemphasis_lane3_xe16=0xa760 + +serdes_driver_current_lane0_xe17=0x1 +serdes_driver_current_lane1_xe17=0x0 +serdes_driver_current_lane2_xe17=0x1 +serdes_driver_current_lane3_xe17=0x1 +serdes_pre_driver_current_lane0_xe17=0x1 +serdes_pre_driver_current_lane1_xe17=0x0 +serdes_pre_driver_current_lane2_xe17=0x1 +serdes_pre_driver_current_lane3_xe17=0x1 +serdes_preemphasis_lane0_xe17=0xa760 +serdes_preemphasis_lane1_xe17=0x9b90 +serdes_preemphasis_lane2_xe17=0xa760 +serdes_preemphasis_lane3_xe17=0xa760 + +serdes_driver_current_lane0_xe18=0x1 +serdes_driver_current_lane1_xe18=0x1 +serdes_driver_current_lane2_xe18=0x1 +serdes_driver_current_lane3_xe18=0x1 +serdes_pre_driver_current_lane0_xe18=0x1 +serdes_pre_driver_current_lane1_xe18=0x1 +serdes_pre_driver_current_lane2_xe18=0x1 +serdes_pre_driver_current_lane3_xe18=0x1 +serdes_preemphasis_lane0_xe18=0xa760 +serdes_preemphasis_lane1_xe18=0xa760 +serdes_preemphasis_lane2_xe18=0xa760 +serdes_preemphasis_lane3_xe18=0xa760 + +serdes_driver_current_lane0_xe19=0x1 +serdes_driver_current_lane1_xe19=0x1 +serdes_driver_current_lane2_xe19=0x1 +serdes_driver_current_lane3_xe19=0x1 +serdes_pre_driver_current_lane0_xe19=0x1 +serdes_pre_driver_current_lane1_xe19=0x1 +serdes_pre_driver_current_lane2_xe19=0x0 +serdes_pre_driver_current_lane3_xe19=0x1 +serdes_preemphasis_lane0_xe19=0xa760 +serdes_preemphasis_lane1_xe19=0xa760 +serdes_preemphasis_lane2_xe19=0xa760 +serdes_preemphasis_lane3_xe19=0xa760 + +serdes_driver_current_lane0_xe20=0x1 +serdes_driver_current_lane1_xe20=0x2 +serdes_driver_current_lane2_xe20=0x1 +serdes_driver_current_lane3_xe20=0x1 +serdes_pre_driver_current_lane0_xe20=0x0 +serdes_pre_driver_current_lane1_xe20=0x2 +serdes_pre_driver_current_lane2_xe20=0x1 +serdes_pre_driver_current_lane3_xe20=0x1 +serdes_preemphasis_lane0_xe20=0xa760 +serdes_preemphasis_lane1_xe20=0xa670 +serdes_preemphasis_lane2_xe20=0xa760 +serdes_preemphasis_lane3_xe20=0xa760 + +serdes_driver_current_lane0_xe21=0x1 +serdes_driver_current_lane1_xe21=0x1 +serdes_driver_current_lane2_xe21=0x0 +serdes_driver_current_lane3_xe21=0x1 +serdes_pre_driver_current_lane0_xe21=0x0 +serdes_pre_driver_current_lane1_xe21=0x1 +serdes_pre_driver_current_lane2_xe21=0x0 +serdes_pre_driver_current_lane3_xe21=0x1 +serdes_preemphasis_lane0_xe21=0xa760 +serdes_preemphasis_lane1_xe21=0xa670 +serdes_preemphasis_lane2_xe21=0xa760 +serdes_preemphasis_lane3_xe21=0xa760 + +serdes_driver_current_lane0_xe22=0x1 +serdes_driver_current_lane1_xe22=0x4 +serdes_driver_current_lane2_xe22=0x2 +serdes_driver_current_lane3_xe22=0x2 +serdes_pre_driver_current_lane0_xe22=0x1 +serdes_pre_driver_current_lane1_xe22=0x4 +serdes_pre_driver_current_lane2_xe22=0x2 +serdes_pre_driver_current_lane3_xe22=0x2 +serdes_preemphasis_lane0_xe22=0xa760 +serdes_preemphasis_lane1_xe22=0x97a0 +serdes_preemphasis_lane2_xe22=0xa670 +serdes_preemphasis_lane3_xe22=0xa760 + +serdes_driver_current_lane0_xe23=0x3 +serdes_driver_current_lane1_xe23=0x3 +serdes_driver_current_lane2_xe23=0x1 +serdes_driver_current_lane3_xe23=0x1 +serdes_pre_driver_current_lane0_xe23=0x3 +serdes_pre_driver_current_lane1_xe23=0x3 +serdes_pre_driver_current_lane2_xe23=0x1 +serdes_pre_driver_current_lane3_xe23=0x1 +serdes_preemphasis_lane0_xe23=0xa760 +serdes_preemphasis_lane1_xe23=0x9b90 +serdes_preemphasis_lane2_xe23=0xab50 +serdes_preemphasis_lane3_xe23=0xa760 + +serdes_driver_current_lane0_xe24=0x1 +serdes_driver_current_lane1_xe24=0x4 +serdes_driver_current_lane2_xe24=0x4 +serdes_driver_current_lane3_xe24=0x3 +serdes_pre_driver_current_lane0_xe24=0x1 +serdes_pre_driver_current_lane1_xe24=0x4 +serdes_pre_driver_current_lane2_xe24=0x4 +serdes_pre_driver_current_lane3_xe24=0x3 +serdes_preemphasis_lane0_xe24=0xa760 +serdes_preemphasis_lane1_xe24=0x93b0 +serdes_preemphasis_lane2_xe24=0x9b90 +serdes_preemphasis_lane3_xe24=0xa760 + +serdes_driver_current_lane0_xe25=0x4 +serdes_driver_current_lane1_xe25=0x3 +serdes_driver_current_lane2_xe25=0x3 +serdes_driver_current_lane3_xe25=0x1 +serdes_pre_driver_current_lane0_xe25=0x4 +serdes_pre_driver_current_lane1_xe25=0x3 +serdes_pre_driver_current_lane2_xe25=0x3 +serdes_pre_driver_current_lane3_xe25=0x1 +serdes_preemphasis_lane0_xe25=0x93b0 +serdes_preemphasis_lane1_xe25=0x9b90 +serdes_preemphasis_lane2_xe25=0x9b90 +serdes_preemphasis_lane3_xe25=0xa760 + +serdes_driver_current_lane0_xe26=0x4 +serdes_driver_current_lane1_xe26=0x4 +serdes_driver_current_lane2_xe26=0x4 +serdes_driver_current_lane3_xe26=0x4 +serdes_pre_driver_current_lane0_xe26=0x4 +serdes_pre_driver_current_lane1_xe26=0x4 +serdes_pre_driver_current_lane2_xe26=0x4 +serdes_pre_driver_current_lane3_xe26=0x4 +serdes_preemphasis_lane0_xe26=0x9b90 +serdes_preemphasis_lane1_xe26=0x97a0 +serdes_preemphasis_lane2_xe26=0x9b90 +serdes_preemphasis_lane3_xe26=0x97a0 + +serdes_driver_current_lane0_xe27=0x4 +serdes_driver_current_lane1_xe27=0x3 +serdes_driver_current_lane2_xe27=0x3 +serdes_driver_current_lane3_xe27=0x3 +serdes_pre_driver_current_lane0_xe27=0x4 +serdes_pre_driver_current_lane1_xe27=0x3 +serdes_pre_driver_current_lane2_xe27=0x3 +serdes_pre_driver_current_lane3_xe27=0x3 +serdes_preemphasis_lane0_xe27=0x9b90 +serdes_preemphasis_lane1_xe27=0x9b90 +serdes_preemphasis_lane2_xe27=0x9b90 +serdes_preemphasis_lane3_xe27=0x9b90 + +serdes_driver_current_lane0_xe28=0x5 +serdes_driver_current_lane1_xe28=0x5 +serdes_driver_current_lane2_xe28=0x6 +serdes_driver_current_lane3_xe28=0x6 +serdes_pre_driver_current_lane0_xe28=0x5 +serdes_pre_driver_current_lane1_xe28=0x5 +serdes_pre_driver_current_lane2_xe28=0x6 +serdes_pre_driver_current_lane3_xe28=0x6 +serdes_preemphasis_lane0_xe28=0xbf00 +serdes_preemphasis_lane1_xe28=0xbf00 +serdes_preemphasis_lane2_xe28=0xbf00 +serdes_preemphasis_lane3_xe28=0xbf00 + +serdes_driver_current_lane0_xe29=0x7 +serdes_driver_current_lane1_xe29=0x6 +serdes_driver_current_lane2_xe29=0x6 +serdes_driver_current_lane3_xe29=0x6 +serdes_pre_driver_current_lane0_xe29=0x7 +serdes_pre_driver_current_lane1_xe29=0x6 +serdes_pre_driver_current_lane2_xe29=0x6 +serdes_pre_driver_current_lane3_xe29=0x6 +serdes_preemphasis_lane0_xe29=0xbb10 +serdes_preemphasis_lane1_xe29=0xbb10 +serdes_preemphasis_lane2_xe29=0xbb10 +serdes_preemphasis_lane3_xe29=0xbb10 + +serdes_driver_current_lane0_xe30=0x7 +serdes_driver_current_lane1_xe30=0x7 +serdes_driver_current_lane2_xe30=0x7 +serdes_driver_current_lane3_xe30=0x7 +serdes_pre_driver_current_lane0_xe30=0x7 +serdes_pre_driver_current_lane1_xe30=0x7 +serdes_pre_driver_current_lane2_xe30=0x7 +serdes_pre_driver_current_lane3_xe30=0x7 +serdes_preemphasis_lane0_xe30=0xc2f0 +serdes_preemphasis_lane1_xe30=0xc2f0 +serdes_preemphasis_lane2_xe30=0xc2f0 +serdes_preemphasis_lane3_xe30=0xc2f0 + +serdes_driver_current_lane0_xe31=0x7 +serdes_driver_current_lane1_xe31=0x7 +serdes_driver_current_lane2_xe31=0x7 +serdes_driver_current_lane3_xe31=0x7 +serdes_pre_driver_current_lane0_xe31=0x7 +serdes_pre_driver_current_lane1_xe31=0x7 +serdes_pre_driver_current_lane2_xe31=0x7 +serdes_pre_driver_current_lane3_xe31=0x7 +serdes_preemphasis_lane0_xe31=0xc2f0 +serdes_preemphasis_lane1_xe31=0xc2f0 +serdes_preemphasis_lane2_xe31=0xc2f0 +serdes_preemphasis_lane3_xe31=0xc2f0 + +serdes_if_type_xe=14 diff --git a/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/sai.profile b/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/sai.profile index 6f07b4605cbf..29db3ecd1624 100644 --- a/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/sai.profile +++ b/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-s8900-48x25G+6x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-s8900-48x25G+6x100G.config.bcm diff --git a/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm b/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm new file mode 100644 index 000000000000..9248b066561b --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s8900_54xc-r0/INGRASYS-S8900-54XC/th-s8900-48x25G+6x100G.config.bcm @@ -0,0 +1,337 @@ +#2017/05/31 + +os=unix + +oversubscribe_mode=1 +pbmp_xport_xe=0x7f00001fff4003ffffc0001fffe + +lpm_scaling_enable=1 +lpm_ipv6_128b_reserved=0 + +#Parity +parity_correction=1 +parity_enable=1 + +scache_filename=/tmp/scach + +#PIPE0 +portmap_1=1:25 +portmap_2=2:25 +portmap_3=3:25 +portmap_4=4:25 +portmap_5=5:25 +portmap_6=6:25 +portmap_7=7:25 +portmap_8=8:25 +portmap_9=9:25 +portmap_10=10:25 +portmap_11=11:25 +portmap_12=12:25 +portmap_13=21:25 +portmap_14=22:25 +portmap_15=23:25 +portmap_16=24:25 + +#PIPE1 +portmap_34=33:25 +portmap_35=34:25 +portmap_36=35:25 +portmap_37=36:25 +portmap_38=37:25 +portmap_39=38:25 +portmap_40=39:25 +portmap_41=40:25 +portmap_42=41:25 +portmap_43=42:25 +portmap_44=43:25 +portmap_45=44:25 +portmap_46=49:25 +portmap_47=50:25 +portmap_48=51:25 +portmap_49=52:25 +portmap_50=53:25 +portmap_51=54:25 +portmap_52=55:25 +portmap_53=56:25 + +#PIPE2 +portmap_68=65:25 +portmap_69=66:25 +portmap_70=67:25 +portmap_71=68:25 +portmap_72=69:25 +portmap_73=70:25 +portmap_74=71:25 +portmap_75=72:25 +portmap_76=81:25 +portmap_77=82:25 +portmap_78=83:25 +portmap_79=84:25 +portmap_80=85:100 + +#PIPE3 +portmap_102=97:100 +portmap_103=101:100 +portmap_104=105:100 +portmap_105=109:100 +portmap_106=117:100 + + +portmap_66=129:10 +portmap_100=131:10 +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 + +serdes_driver_current_xe0=0xF +serdes_preemphasis_xe0=0x3E3200 +serdes_if_type_xe0=14 + +serdes_driver_current_xe1=0xF +serdes_preemphasis_xe1=0x3A3600 +serdes_if_type_xe1=14 + +serdes_driver_current_xe2=0xF +serdes_preemphasis_xe2=0x3A3600 +serdes_if_type_xe2=14 + +serdes_driver_current_xe3=0xF +serdes_preemphasis_xe3=0x383800 +serdes_if_type_xe3=14 + +serdes_driver_current_xe4=0xF +serdes_preemphasis_xe4=0x373900 +serdes_if_type_xe4=14 + +serdes_driver_current_xe5=0xF +serdes_preemphasis_xe5=0x2E4200 +serdes_if_type_xe5=14 + +serdes_driver_current_xe6=0xF +serdes_preemphasis_xe6=0x333D00 +serdes_if_type_xe6=14 + +serdes_driver_current_xe7=0xC +serdes_preemphasis_xe7=0x304000 +serdes_if_type_xe7=14 + +serdes_driver_current_xe8=0xE +serdes_preemphasis_xe8=0x2F4300 +serdes_if_type_xe8=14 + +serdes_driver_current_xe9=0xC +serdes_preemphasis_xe9=0x2D4300 +serdes_if_type_xe9=14 + +serdes_driver_current_xe10=0xC +serdes_preemphasis_xe10=0x2C4400 +serdes_if_type_xe10=14 + +serdes_driver_current_xe11=0xC +serdes_preemphasis_xe11=0x2D4300 +serdes_if_type_xe11=14 + +serdes_driver_current_xe12=0xC +serdes_preemphasis_xe12=0x294700 +serdes_if_type_xe12=14 + +serdes_driver_current_xe13=0xC +serdes_preemphasis_xe13=0x284800 +serdes_if_type_xe13=14 + +serdes_driver_current_xe14=0xA +serdes_preemphasis_xe14=0x294700 +serdes_if_type_xe14=14 + +serdes_driver_current_xe15=0xF +serdes_preemphasis_xe15=0x294700 +serdes_if_type_xe15=14 + +serdes_driver_current_xe16=0x9 +serdes_preemphasis_xe16=0x185800 +serdes_if_type_xe16=14 + +serdes_driver_current_xe17=0x9 +serdes_preemphasis_xe17=0x1D5300 +serdes_if_type_xe17=14 + +serdes_driver_current_xe18=0x9 +serdes_preemphasis_xe18=0x1C5400 +serdes_if_type_xe18=14 + +serdes_driver_current_xe19=0x9 +serdes_preemphasis_xe19=0x1C5400 +serdes_if_type_xe19=14 + +serdes_driver_current_xe20=0x9 +serdes_preemphasis_xe20=0x1C5400 +serdes_if_type_xe20=14 + +serdes_driver_current_xe21=0x9 +serdes_preemphasis_xe21=0x1C5400 +serdes_if_type_xe21=14 + +serdes_driver_current_xe22=0x9 +serdes_preemphasis_xe22=0x1C5400 +serdes_if_type_xe22=14 + +serdes_driver_current_xe23=0x9 +serdes_preemphasis_xe23=0x1C5400 +serdes_if_type_xe23=14 + +serdes_driver_current_xe24=0x8 +serdes_preemphasis_xe24=0x1C5400 +serdes_if_type_xe24=14 + +serdes_driver_current_xe25=0x8 +serdes_preemphasis_xe25=0x1C5400 +serdes_if_type_xe25=14 + +serdes_driver_current_xe26=0x8 +serdes_preemphasis_xe26=0x185800 +serdes_if_type_xe26=14 + +serdes_driver_current_xe27=0x8 +serdes_preemphasis_xe27=0x185800 +serdes_if_type_xe27=14 + +serdes_driver_current_xe28=0x8 +serdes_preemphasis_xe28=0x145C00 +serdes_if_type_xe28=14 + +serdes_driver_current_xe29=0x8 +serdes_preemphasis_xe29=0x195700 +serdes_if_type_xe29=14 + +serdes_driver_current_xe30=0x8 +serdes_preemphasis_xe30=0x195700 +serdes_if_type_xe30=14 + +serdes_driver_current_xe31=0x8 +serdes_preemphasis_xe31=0x195700 +serdes_if_type_xe31=14 + +serdes_driver_current_xe32=0xC +serdes_preemphasis_xe32=0x195700 +serdes_if_type_xe32=14 + +serdes_driver_current_xe33=0x9 +serdes_preemphasis_xe33=0x205000 +serdes_if_type_xe33=14 + +serdes_driver_current_xe34=0xC +serdes_preemphasis_xe34=0x214F00 +serdes_if_type_xe34=14 + +serdes_driver_current_xe35=0xC +serdes_preemphasis_xe35=0x244C00 +serdes_if_type_xe35=14 + +serdes_driver_current_xe36=0xC +serdes_preemphasis_xe36=0x244C00 +serdes_if_type_xe36=14 + +serdes_driver_current_xe37=0xC +serdes_preemphasis_xe37=0x244C00 +serdes_if_type_xe37=14 + +serdes_driver_current_xe38=0xC +serdes_preemphasis_xe38=0x244C00 +serdes_if_type_xe38=14 + +serdes_driver_current_xe39=0xC +serdes_preemphasis_xe39=0x244C00 +serdes_if_type_xe39=14 + +serdes_driver_current_xe40=0xD +serdes_preemphasis_xe40=0x284800 +serdes_if_type_xe40=14 + +serdes_driver_current_xe41=0xC +serdes_preemphasis_xe41=0x284800 +serdes_if_type_xe41=14 + +serdes_driver_current_xe42=0xE +serdes_preemphasis_xe42=0x294700 +serdes_if_type_xe42=14 + +serdes_driver_current_xe43=0xE +serdes_preemphasis_xe43=0x294700 +serdes_if_type_xe43=14 + +serdes_driver_current_xe44=0xE +serdes_preemphasis_xe44=0x294700 +serdes_if_type_xe44=14 + +serdes_driver_current_xe45=0xF +serdes_preemphasis_xe45=0x284800 +serdes_if_type_xe45=14 + +serdes_driver_current_xe46=0xF +serdes_preemphasis_xe46=0x284800 +serdes_if_type_xe46=14 + +serdes_driver_current_xe47=0xF +serdes_preemphasis_xe47=0x304000 +serdes_if_type_xe47=14 + +serdes_driver_current_lane0_ce0=0xC +serdes_driver_current_lane1_ce0=0xC +serdes_driver_current_lane2_ce0=0xF +serdes_driver_current_lane3_ce0=0xC +serdes_preemphasis_lane0_ce0=0x284800 +serdes_preemphasis_lane1_ce0=0x294100 +serdes_preemphasis_lane2_ce0=0x294100 +serdes_preemphasis_lane3_ce0=0x294100 +serdes_if_type_ce0=14 + +serdes_driver_current_lane0_ce1=0xC +serdes_driver_current_lane1_ce1=0xF +serdes_driver_current_lane2_ce1=0xC +serdes_driver_current_lane3_ce1=0xC +serdes_preemphasis_lane0_ce1=0x284200 +serdes_preemphasis_lane1_ce1=0x3A3600 +serdes_preemphasis_lane2_ce1=0x2C4400 +serdes_preemphasis_lane3_ce1=0x2C4400 +serdes_if_type_ce1=14 + +serdes_driver_current_lane0_ce2=0xC +serdes_driver_current_lane1_ce2=0xC +serdes_driver_current_lane2_ce2=0xC +serdes_driver_current_lane3_ce2=0xC +serdes_preemphasis_lane0_ce2=0x2F4100 +serdes_preemphasis_lane1_ce2=0x383800 +serdes_preemphasis_lane2_ce2=0x2F4100 +serdes_preemphasis_lane3_ce2=0x304000 +serdes_if_type_ce2=14 + +serdes_driver_current_lane0_ce3=0xC +serdes_driver_current_lane1_ce3=0xF +serdes_driver_current_lane2_ce3=0xC +serdes_driver_current_lane3_ce3=0xA +serdes_preemphasis_lane0_ce3=0x304000 +serdes_preemphasis_lane1_ce3=0x3F3100 +serdes_preemphasis_lane2_ce3=0x313F00 +serdes_preemphasis_lane3_ce3=0x304000 +serdes_if_type_ce3=14 + +serdes_driver_current_lane0_ce4=0xC +serdes_driver_current_lane1_ce4=0xF +serdes_driver_current_lane2_ce4=0xC +serdes_driver_current_lane3_ce4=0xC +serdes_preemphasis_lane0_ce4=0x304000 +serdes_preemphasis_lane1_ce4=0x313F00 +serdes_preemphasis_lane2_ce4=0x2F4100 +serdes_preemphasis_lane3_ce4=0x2E4200 +serdes_if_type_ce4=14 + +serdes_driver_current_lane0_ce5=0xE +serdes_driver_current_lane1_ce5=0xF +serdes_driver_current_lane2_ce5=0xF +serdes_driver_current_lane3_ce5=0xF +serdes_preemphasis_lane0_ce5=0x304000 +serdes_preemphasis_lane1_ce5=0x3F3100 +serdes_preemphasis_lane2_ce5=0x383800 +serdes_preemphasis_lane3_ce5=0x3F3100 +serdes_if_type_ce5=14 diff --git a/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/sai.profile b/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/sai.profile index f617b8f3c473..77a0e3efa431 100644 --- a/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/sai.profile +++ b/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-s8900-48x25G+16x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-s8900-48x25G+16x100G.config.bcm diff --git a/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm b/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm new file mode 100644 index 000000000000..11d8e30a2aa8 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s8900_64xc-r0/INGRASYS-S8900-64XC/th-s8900-48x25G+16x100G.config.bcm @@ -0,0 +1,448 @@ +#2017/05/31 + +os=unix + +oversubscribe_mode=1 +pbmp_xport_xe=0x3d000000ff4003ffffdfffffffe + +lpm_scaling_enable=1 +lpm_ipv6_128b_reserved=0 + +#Parity +parity_correction=1 +parity_enable=1 + +scache_filename=/tmp/scach + +#PIPE0 +portmap_1=17:25 +portmap_2=18:25 +portmap_3=19:25 +portmap_4=20:25 +portmap_5=24:25 +portmap_6=23:25 +portmap_7=22:25 +portmap_8=21:25 +portmap_9=28:25 +portmap_10=27:25 +portmap_11=26:25 +portmap_12=25:25 +portmap_13=32:25 +portmap_14=31:25 +portmap_15=30:25 +portmap_16=29:25 +portmap_17=1:25 +portmap_18=2:25 +portmap_19=3:25 +portmap_20=4:25 +portmap_21=8:25 +portmap_22=7:25 +portmap_23=6:25 +portmap_24=5:25 +portmap_25=12:25 +portmap_26=11:25 +portmap_27=10:25 +portmap_28=9:25 +portmap_29=13:25 +portmap_30=14:25 +portmap_31=15:25 +portmap_32=16:25 + +#PIPE1 +portmap_34=33:25 +portmap_35=34:25 +portmap_36=35:25 +portmap_37=36:25 +portmap_38=38:25 +portmap_39=39:25 +portmap_40=40:25 +portmap_41=37:25 +portmap_42=41:25 +portmap_43=42:25 +portmap_44=43:25 +portmap_45=44:25 +portmap_46=48:25 +portmap_47=45:25 +portmap_48=46:25 +portmap_49=47:25 +portmap_50=49:100 +portmap_51=53:100 +portmap_52=57:100 +portmap_53=61:100 + +#PIPE2 +portmap_68=65:100 +portmap_69=69:100 +portmap_70=73:100 +portmap_71=77:100 +portmap_72=81:100 +portmap_73=85:100 +portmap_74=89:100 +portmap_75=93:100 + +#PIPE3 +portmap_102=97:100 +portmap_103=101:100 +portmap_104=105:100 +portmap_105=109:100 + + +portmap_66=129:10 +portmap_100=131:10 + +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 + +serdes_driver_current_xe0=0x9 +serdes_preemphasis_xe0=0x304000 +serdes_if_type_xe0=14 + +serdes_driver_current_xe1=0x9 +serdes_preemphasis_xe1=0x304000 +serdes_if_type_xe1=14 + +serdes_driver_current_xe2=0x9 +serdes_preemphasis_xe2=0x304000 +serdes_if_type_xe2=14 + +serdes_driver_current_xe3=0x9 +serdes_preemphasis_xe3=0x2c4400 +serdes_if_type_xe3=14 + +serdes_driver_current_xe4=0x9 +serdes_preemphasis_xe4=0x304000 +serdes_if_type_xe4=14 + +serdes_driver_current_xe5=0x9 +serdes_preemphasis_xe5=0x304000 +serdes_if_type_xe5=14 + +serdes_driver_current_xe6=0x9 +serdes_preemphasis_xe6=0x2c4400 +serdes_if_type_xe6=14 + +serdes_driver_current_xe7=0x9 +serdes_preemphasis_xe7=0x2C4400 +serdes_if_type_xe7=14 + +serdes_driver_current_xe8=0x9 +serdes_preemphasis_xe8=0x2c4400 +serdes_if_type_xe8=14 + +serdes_driver_current_xe9=0x9 +serdes_preemphasis_xe9=0x284800 +serdes_if_type_xe9=14 + +serdes_driver_current_xe10=0x9 +serdes_preemphasis_xe10=0x2C4400 +serdes_if_type_xe10=14 + +serdes_driver_current_xe11=0x9 +serdes_preemphasis_xe11=0x2c4400 +serdes_if_type_xe11=14 + +serdes_driver_current_xe12=0x9 +serdes_preemphasis_xe12=0x2c4400 +serdes_if_type_xe12=14 + +serdes_driver_current_xe13=0x9 +serdes_preemphasis_xe13=0x2c4400 +serdes_if_type_xe13=14 + +serdes_driver_current_xe14=0x9 +serdes_preemphasis_xe14=0x2c4400 +serdes_if_type_xe14=14 + +serdes_driver_current_xe15=0x9 +serdes_preemphasis_xe15=0x2c4400 +serdes_if_type_xe15=14 + +serdes_driver_current_xe16=0x9 +serdes_preemphasis_xe16=0x2c4400 +serdes_if_type_xe16=14 + +serdes_driver_current_xe17=0xB +serdes_preemphasis_xe17=0x304000 +serdes_if_type_xe17=14 + +serdes_driver_current_xe18=0xA +serdes_preemphasis_xe18=0x2C4400 +serdes_if_type_xe18=14 + +serdes_driver_current_xe19=0x9 +serdes_preemphasis_xe19=0x2C4400 +serdes_if_type_xe19=14 + +serdes_driver_current_xe20=0xA +serdes_preemphasis_xe20=0x304000 +serdes_if_type_xe20=14 + +serdes_driver_current_xe21=0x9 +serdes_preemphasis_xe21=0x2C4400 +serdes_if_type_xe21=14 + +serdes_driver_current_xe22=0x9 +serdes_preemphasis_xe22=0x2C4400 +serdes_if_type_xe22=14 + +serdes_driver_current_xe23=0xC +serdes_preemphasis_xe23=0x304000 +serdes_if_type_xe23=14 + +serdes_driver_current_xe24=0xF +serdes_preemphasis_xe24=0x005100 +serdes_if_type_xe24=14 + +serdes_driver_current_xe25=0x9 +serdes_preemphasis_xe25=0x2C4400 +serdes_if_type_xe25=14 + +serdes_driver_current_xe26=0x9 +serdes_preemphasis_xe26=0x304000 +serdes_if_type_xe26=14 + +serdes_driver_current_xe27=0x9 +serdes_preemphasis_xe27=0x304000 +serdes_if_type_xe27=14 + +serdes_driver_current_xe28=0xA +serdes_preemphasis_xe28=0x2C4400 +serdes_if_type_xe28=14 + +serdes_driver_current_xe29=0x9 +serdes_preemphasis_xe29=0x284800 +serdes_if_type_xe29=14 + +serdes_driver_current_xe30=0x9 +serdes_preemphasis_xe30=0x2C4400 +serdes_if_type_xe30=14 + +serdes_driver_current_xe31=0xA +serdes_preemphasis_xe31=0x2C4400 +serdes_if_type_xe31=14 + +serdes_driver_current_xe32=0x9 +serdes_preemphasis_xe32=0x284800 +serdes_if_type_xe32=14 + +serdes_driver_current_xe33=0x7 +serdes_preemphasis_xe33=0x284800 +serdes_if_type_xe33=14 + +serdes_driver_current_xe34=0x9 +serdes_preemphasis_xe34=0x284800 +serdes_if_type_xe34=14 + +serdes_driver_current_xe35=0x9 +serdes_preemphasis_xe35=0x284800 +serdes_if_type_xe35=14 + +serdes_driver_current_xe36=0x9 +serdes_preemphasis_xe36=0x284800 +serdes_if_type_xe36=14 + +serdes_driver_current_xe37=0x9 +serdes_preemphasis_xe37=0x284800 +serdes_if_type_xe37=14 + +serdes_driver_current_xe38=0x9 +serdes_preemphasis_xe38=0x2C4400 +serdes_if_type_xe38=14 + +serdes_driver_current_xe39=0x9 +serdes_preemphasis_xe39=0x284800 +serdes_if_type_xe39=14 + +serdes_driver_current_xe40=0xA +serdes_preemphasis_xe40=0x284800 +serdes_if_type_xe40=14 + +serdes_driver_current_xe41=0x9 +serdes_preemphasis_xe41=0x2C4400 +serdes_if_type_xe41=14 + +serdes_driver_current_xe42=0x9 +serdes_preemphasis_xe42=0x2C4400 +serdes_if_type_xe42=14 + +serdes_driver_current_xe43=0xA +serdes_preemphasis_xe43=0x2E4200 +serdes_if_type_xe43=14 + +serdes_driver_current_xe44=0xA +serdes_preemphasis_xe44=0x2E4200 +serdes_if_type_xe44=14 + +serdes_driver_current_xe45=0xA +serdes_preemphasis_xe45=0x2C4400 +serdes_if_type_xe45=14 + +serdes_driver_current_xe46=0x9 +serdes_preemphasis_xe46=0x2C4400 +serdes_if_type_xe46=14 + +serdes_driver_current_xe47=0x9 +serdes_preemphasis_xe47=0x2C4400 +serdes_if_type_xe47=14 + +serdes_driver_current_lane0_ce0=0x9 +serdes_driver_current_lane1_ce0=0xF +serdes_driver_current_lane2_ce0=0x9 +serdes_driver_current_lane3_ce0=0x9 +serdes_preemphasis_lane0_ce0=0x2C4400 +serdes_preemphasis_lane1_ce0=0x343C00 +serdes_preemphasis_lane2_ce0=0x2C4400 +serdes_preemphasis_lane3_ce0=0x2C4400 +serdes_if_type_ce0=14 + +serdes_driver_current_lane0_ce1=0x9 +serdes_driver_current_lane1_ce1=0x9 +serdes_driver_current_lane2_ce1=0x9 +serdes_driver_current_lane3_ce1=0xE +serdes_preemphasis_lane0_ce1=0x284800 +serdes_preemphasis_lane1_ce1=0x284800 +serdes_preemphasis_lane2_ce1=0x2C4400 +serdes_preemphasis_lane3_ce1=0x2C4400 +serdes_if_type_ce1=14 + +serdes_driver_current_lane0_ce2=0x9 +serdes_driver_current_lane1_ce2=0xF +serdes_driver_current_lane2_ce2=0x9 +serdes_driver_current_lane3_ce2=0xD +serdes_preemphasis_lane0_ce2=0x284800 +serdes_preemphasis_lane1_ce2=0x343C00 +serdes_preemphasis_lane2_ce2=0x284800 +serdes_preemphasis_lane3_ce2=0x304000 +serdes_if_type_ce2=14 + +serdes_driver_current_lane0_ce3=0x9 +serdes_driver_current_lane1_ce3=0xD +serdes_driver_current_lane2_ce3=0x9 +serdes_driver_current_lane3_ce3=0xD +serdes_preemphasis_lane0_ce3=0x2C4400 +serdes_preemphasis_lane1_ce3=0x304000 +serdes_preemphasis_lane2_ce3=0x2C4400 +serdes_preemphasis_lane3_ce3=0x304000 +serdes_if_type_ce3=14 + +serdes_driver_current_lane0_ce4=0x9 +serdes_driver_current_lane1_ce4=0x9 +serdes_driver_current_lane2_ce4=0x9 +serdes_driver_current_lane3_ce4=0xD +serdes_preemphasis_lane0_ce4=0x2C4400 +serdes_preemphasis_lane1_ce4=0x2C4400 +serdes_preemphasis_lane2_ce4=0x2C4400 +serdes_preemphasis_lane3_ce4=0x304000 +serdes_if_type_ce4=14 + +serdes_driver_current_lane0_ce5=0x9 +serdes_driver_current_lane1_ce5=0xF +serdes_driver_current_lane2_ce5=0x9 +serdes_driver_current_lane3_ce5=0x9 +serdes_preemphasis_lane0_ce5=0x2C4400 +serdes_preemphasis_lane1_ce5=0x383800 +serdes_preemphasis_lane2_ce5=0x2C4400 +serdes_preemphasis_lane3_ce5=0x2C4400 +serdes_if_type_ce5=14 + +serdes_driver_current_lane0_ce6=0x9 +serdes_driver_current_lane1_ce6=0x9 +serdes_driver_current_lane2_ce6=0x9 +serdes_driver_current_lane3_ce6=0xE +serdes_preemphasis_lane0_ce6=0x2C4400 +serdes_preemphasis_lane1_ce6=0x2C4400 +serdes_preemphasis_lane2_ce6=0x2C4400 +serdes_preemphasis_lane3_ce6=0x304000 +serdes_if_type_ce6=14 + +serdes_driver_current_lane0_ce7=0x9 +serdes_driver_current_lane1_ce7=0xA +serdes_driver_current_lane2_ce7=0x9 +serdes_driver_current_lane3_ce7=0XE +serdes_preemphasis_lane0_ce7=0x284800 +serdes_preemphasis_lane1_ce7=0x304000 +serdes_preemphasis_lane2_ce7=0x2C4400 +serdes_preemphasis_lane3_ce7=0x343C00 +serdes_if_type_ce7=14 + +serdes_driver_current_lane0_ce8=0x9 +serdes_driver_current_lane1_ce8=0xE +serdes_driver_current_lane2_ce8=0xF +serdes_driver_current_lane3_ce8=0xE +serdes_preemphasis_lane0_ce8=0x2C4400 +serdes_preemphasis_lane1_ce8=0x304000 +serdes_preemphasis_lane2_ce8=0x343C00 +serdes_preemphasis_lane3_ce8=0x304000 +serdes_if_type_ce8=14 + +serdes_driver_current_lane0_ce9=0x9 +serdes_driver_current_lane1_ce9=0xD +serdes_driver_current_lane2_ce9=0xD +serdes_driver_current_lane3_ce9=0xF +serdes_preemphasis_lane0_ce9=0x2C4400 +serdes_preemphasis_lane1_ce9=0x343C00 +serdes_preemphasis_lane2_ce9=0x343C00 +serdes_preemphasis_lane3_ce9=0x343C00 +serdes_if_type_ce9=14 + +serdes_driver_current_lane0_ce10=0xD +serdes_driver_current_lane1_ce10=0xE +serdes_driver_current_lane2_ce10=0xD +serdes_driver_current_lane3_ce10=0xD +serdes_preemphasis_lane0_ce10=0x343C00 +serdes_preemphasis_lane1_ce10=0x343C00 +serdes_preemphasis_lane2_ce10=0x343C00 +serdes_preemphasis_lane3_ce10=0x343C00 +serdes_if_type_ce10=14 + +serdes_driver_current_lane0_ce11=0xE +serdes_driver_current_lane1_ce11=0xD +serdes_driver_current_lane2_ce11=0xD +serdes_driver_current_lane3_ce11=0xD +serdes_preemphasis_lane0_ce11=0x343C00 +serdes_preemphasis_lane1_ce11=0x343C00 +serdes_preemphasis_lane2_ce11=0X343C00 +serdes_preemphasis_lane3_ce11=0X343C00 +serdes_if_type_ce11=14 + +serdes_driver_current_lane0_ce12=0xD +serdes_driver_current_lane1_ce12=0xD +serdes_driver_current_lane2_ce12=0xD +serdes_driver_current_lane3_ce12=0xD +serdes_preemphasis_lane0_ce12=0x343C00 +serdes_preemphasis_lane1_ce12=0x343C00 +serdes_preemphasis_lane2_ce12=0x343C00 +serdes_preemphasis_lane3_ce12=0x343C00 +serdes_if_type_ce12=14 + +serdes_driver_current_lane0_ce13=0xD +serdes_driver_current_lane1_ce13=0xD +serdes_driver_current_lane2_ce13=0xD +serdes_driver_current_lane3_ce13=0xF +serdes_preemphasis_lane0_ce13=0x343C00 +serdes_preemphasis_lane1_ce13=0x343C00 +serdes_preemphasis_lane2_ce13=0x343C00 +serdes_preemphasis_lane3_ce13=0x005800 +serdes_if_type_ce13=14 + +serdes_driver_current_lane0_ce14=0xE +serdes_driver_current_lane1_ce14=0xD +serdes_driver_current_lane2_ce14=0xD +serdes_driver_current_lane3_ce14=0xE +serdes_preemphasis_lane0_ce14=0x383800 +serdes_preemphasis_lane1_ce14=0x343C00 +serdes_preemphasis_lane2_ce14=0x343C00 +serdes_preemphasis_lane3_ce14=0x383800 +serdes_if_type_ce14=14 + +serdes_driver_current_lane0_ce15=0xD +serdes_driver_current_lane1_ce15=0xC +serdes_driver_current_lane2_ce15=0xC +serdes_driver_current_lane3_ce15=0xF +serdes_preemphasis_lane0_ce15=0x343C00 +serdes_preemphasis_lane1_ce15=0x304000 +serdes_preemphasis_lane2_ce15=0x304000 +serdes_preemphasis_lane3_ce15=0x005100 +serdes_if_type_ce15=14 diff --git a/device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/sai.profile b/device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/sai.profile index a431427469e3..14a36af5f554 100644 --- a/device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/sai.profile +++ b/device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-s9100-32x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-s9100-32x100G.config.bcm diff --git a/device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/th-s9100-32x100G.config.bcm b/device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/th-s9100-32x100G.config.bcm new file mode 100644 index 000000000000..3f4ce8faa740 --- /dev/null +++ b/device/ingrasys/x86_64-ingrasys_s9100-r0/INGRASYS-S9100-C32/th-s9100-32x100G.config.bcm @@ -0,0 +1,359 @@ +#2017/09/12 + +os=unix + +oversubscribe_mode=1 +pbmp_xport_xe=0x3fc000000ff0000003fc000001fe + +#ALPM enable +l3_alpm_enable=2 +ipv6_lpm_128b_enable=1 +l3_mem_entries=40960 +l2_mem_entries=40960 + +l2xmsg_mode=1 +mmu_lossless=0 + +#Parity +parity_correction=1 +parity_enable=1 + +scache_filename=/tmp/scach + +#PIPE0 +portmap_1=5:100 +portmap_2=1:100 +portmap_3=13:100 +portmap_4=9:100 +portmap_5=21:100 +portmap_6=17:100 +portmap_7=29:100 +portmap_8=25:100 + +#PIPE1 +portmap_34=37:100 +portmap_35=33:100 +portmap_36=45:100 +portmap_37=41:100 +portmap_38=53:100 +portmap_39=49:100 +portmap_40=61:100 +portmap_41=57:100 + +#PIPE2 +portmap_68=69:100 +portmap_69=65:100 +portmap_70=77:100 +portmap_71=73:100 +portmap_72=85:100 +portmap_73=81:100 +portmap_74=93:100 +portmap_75=89:100 + +#PIPE3 +portmap_102=101:100 +portmap_103=97:100 +portmap_104=109:100 +portmap_105=105:100 +portmap_106=117:100 +portmap_107=113:100 +portmap_108=125:100 +portmap_109=121:100 + +#portmap_66=129:10 +#portmap_100=131:10 +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 + +serdes_driver_current_lane0_ce0=0xF +serdes_driver_current_lane1_ce0=0xF +serdes_driver_current_lane2_ce0=0xF +serdes_driver_current_lane3_ce0=0xF +serdes_preemphasis_lane0_ce0=0x153C1F +serdes_preemphasis_lane1_ce0=0x20341C +serdes_preemphasis_lane2_ce0=0x153C1F +serdes_preemphasis_lane3_ce0=0x243418 + +serdes_driver_current_lane0_ce1=0xF +serdes_driver_current_lane1_ce1=0xF +serdes_driver_current_lane2_ce1=0xF +serdes_driver_current_lane3_ce1=0xF +serdes_preemphasis_lane0_ce1=0x153C1F +serdes_preemphasis_lane1_ce1=0x20341C +serdes_preemphasis_lane2_ce1=0x153C1F +serdes_preemphasis_lane3_ce1=0x20341C + +serdes_driver_current_lane0_ce2=0xF +serdes_driver_current_lane1_ce2=0xD +serdes_driver_current_lane2_ce2=0xF +serdes_driver_current_lane3_ce2=0xD +serdes_preemphasis_lane0_ce2=0x153C1F +serdes_preemphasis_lane1_ce2=0x243418 +serdes_preemphasis_lane2_ce2=0x153C1F +serdes_preemphasis_lane3_ce2=0x203C14 + +serdes_driver_current_lane0_ce3=0xF +serdes_driver_current_lane1_ce3=0xD +serdes_driver_current_lane2_ce3=0xF +serdes_driver_current_lane3_ce3=0xD +serdes_preemphasis_lane0_ce3=0x153C1F +serdes_preemphasis_lane1_ce3=0x203C14 +serdes_preemphasis_lane2_ce3=0x153C1F +serdes_preemphasis_lane3_ce3=0x243418 + +serdes_driver_current_lane0_ce4=0xF +serdes_driver_current_lane1_ce4=0xB +serdes_driver_current_lane2_ce4=0xF +serdes_driver_current_lane3_ce4=0xA +serdes_preemphasis_lane0_ce4=0x153C1F +serdes_preemphasis_lane1_ce4=0x333D00 +serdes_preemphasis_lane2_ce4=0x153C1F +serdes_preemphasis_lane3_ce4=0x304000 + +serdes_driver_current_lane0_ce5=0xF +serdes_driver_current_lane1_ce5=0xB +serdes_driver_current_lane2_ce5=0xF +serdes_driver_current_lane3_ce5=0xA +serdes_preemphasis_lane0_ce5=0x153C1F +serdes_preemphasis_lane1_ce5=0x304000 +serdes_preemphasis_lane2_ce5=0x153C1F +serdes_preemphasis_lane3_ce5=0x304000 + +serdes_driver_current_lane0_ce6=0xF +serdes_driver_current_lane1_ce6=0xC +serdes_driver_current_lane2_ce6=0xF +serdes_driver_current_lane3_ce6=0xA +serdes_preemphasis_lane0_ce6=0x153C1F +serdes_preemphasis_lane1_ce6=0x363A00 +serdes_preemphasis_lane2_ce6=0x153C1F +serdes_preemphasis_lane3_ce6=0x304000 + +serdes_driver_current_lane0_ce7=0xF +serdes_driver_current_lane1_ce7=0x8 +serdes_driver_current_lane2_ce7=0xF +serdes_driver_current_lane3_ce7=0x8 +serdes_preemphasis_lane0_ce7=0x153C1F +serdes_preemphasis_lane1_ce7=0x304000 +serdes_preemphasis_lane2_ce7=0x153C1F +serdes_preemphasis_lane3_ce7=0x304000 + +serdes_driver_current_lane0_ce8=0x8 +serdes_driver_current_lane1_ce8=0x9 +serdes_driver_current_lane2_ce8=0x8 +serdes_driver_current_lane3_ce8=0x8 +serdes_preemphasis_lane0_ce8=0x254B00 +serdes_preemphasis_lane1_ce8=0x2C4400 +serdes_preemphasis_lane2_ce8=0x254B00 +serdes_preemphasis_lane3_ce8=0x254B00 + +serdes_driver_current_lane0_ce9=0x8 +serdes_driver_current_lane1_ce9=0x9 +serdes_driver_current_lane2_ce9=0x8 +serdes_driver_current_lane3_ce9=0x8 +serdes_preemphasis_lane0_ce9=0x254B00 +serdes_preemphasis_lane1_ce9=0x2B4500 +serdes_preemphasis_lane2_ce9=0x254B00 +serdes_preemphasis_lane3_ce9=0x254B00 + +serdes_driver_current_lane0_ce10=0x8 +serdes_driver_current_lane1_ce10=0x7 +serdes_driver_current_lane2_ce10=0x8 +serdes_driver_current_lane3_ce10=0x8 +serdes_preemphasis_lane0_ce10=0x254B00 +serdes_preemphasis_lane1_ce10=0x2B4500 +serdes_preemphasis_lane2_ce10=0x254B00 +serdes_preemphasis_lane3_ce10=0x254B00 + +serdes_driver_current_lane0_ce11=0x8 +serdes_driver_current_lane1_ce11=0x8 +serdes_driver_current_lane2_ce11=0x8 +serdes_driver_current_lane3_ce11=0x8 +serdes_preemphasis_lane0_ce11=0x254B00 +serdes_preemphasis_lane1_ce11=0x2C4400 +serdes_preemphasis_lane2_ce11=0x254B00 +serdes_preemphasis_lane3_ce11=0x254B00 + +serdes_driver_current_lane0_ce12=0x8 +serdes_driver_current_lane1_ce12=0x5 +serdes_driver_current_lane2_ce12=0x8 +serdes_driver_current_lane3_ce12=0x8 +serdes_preemphasis_lane0_ce12=0x254B00 +serdes_preemphasis_lane1_ce12=0x254B00 +serdes_preemphasis_lane2_ce12=0x254B00 +serdes_preemphasis_lane3_ce12=0x254B00 + +serdes_driver_current_lane0_ce13=0x8 +serdes_driver_current_lane1_ce13=0x8 +serdes_driver_current_lane2_ce13=0x8 +serdes_driver_current_lane3_ce13=0x8 +serdes_preemphasis_lane0_ce13=0x254B00 +serdes_preemphasis_lane1_ce13=0x254B00 +serdes_preemphasis_lane2_ce13=0x254B00 +serdes_preemphasis_lane3_ce13=0x254B00 + +serdes_driver_current_lane0_ce14=0x7 +serdes_driver_current_lane1_ce14=0x7 +serdes_driver_current_lane2_ce14=0x7 +serdes_driver_current_lane3_ce14=0x7 +serdes_preemphasis_lane0_ce14=0x254B00 +serdes_preemphasis_lane1_ce14=0x254B00 +serdes_preemphasis_lane2_ce14=0x254B00 +serdes_preemphasis_lane3_ce14=0x254B00 + +serdes_driver_current_lane0_ce15=0x7 +serdes_driver_current_lane1_ce15=0x5 +serdes_driver_current_lane2_ce15=0x7 +serdes_driver_current_lane3_ce15=0x7 +serdes_preemphasis_lane0_ce15=0x254B00 +serdes_preemphasis_lane1_ce15=0x254B00 +serdes_preemphasis_lane2_ce15=0x254B00 +serdes_preemphasis_lane3_ce15=0x254B00 + +serdes_driver_current_lane0_ce16=0x4 +serdes_driver_current_lane1_ce16=0x4 +serdes_driver_current_lane2_ce16=0x4 +serdes_driver_current_lane3_ce16=0x4 +serdes_preemphasis_lane0_ce16=0x274900 +serdes_preemphasis_lane1_ce16=0x274900 +serdes_preemphasis_lane2_ce16=0x274900 +serdes_preemphasis_lane3_ce16=0x274900 + +serdes_driver_current_lane0_ce17=0x8 +serdes_driver_current_lane1_ce17=0xF +serdes_driver_current_lane2_ce17=0xF +serdes_driver_current_lane3_ce17=0xF +serdes_preemphasis_lane0_ce17=0x254B00 +serdes_preemphasis_lane1_ce17=0x304000 +serdes_preemphasis_lane2_ce17=0x304000 +serdes_preemphasis_lane3_ce17=0x304000 + +serdes_driver_current_lane0_ce18=0x2 +serdes_driver_current_lane1_ce18=0x2 +serdes_driver_current_lane2_ce18=0x2 +serdes_driver_current_lane3_ce18=0x2 +serdes_preemphasis_lane0_ce18=0x205000 +serdes_preemphasis_lane1_ce18=0x205000 +serdes_preemphasis_lane2_ce18=0x205000 +serdes_preemphasis_lane3_ce18=0x205000 + +serdes_driver_current_lane0_ce19=0x2 +serdes_driver_current_lane1_ce19=0x2 +serdes_driver_current_lane2_ce19=0x2 +serdes_driver_current_lane3_ce19=0x2 +serdes_preemphasis_lane0_ce19=0x205000 +serdes_preemphasis_lane1_ce19=0x205000 +serdes_preemphasis_lane2_ce19=0x205000 +serdes_preemphasis_lane3_ce19=0x205000 + +serdes_driver_current_lane0_ce20=0x2 +serdes_driver_current_lane1_ce20=0x2 +serdes_driver_current_lane2_ce20=0x2 +serdes_driver_current_lane3_ce20=0x2 +serdes_preemphasis_lane0_ce20=0x205000 +serdes_preemphasis_lane1_ce20=0x205000 +serdes_preemphasis_lane2_ce20=0x205000 +serdes_preemphasis_lane3_ce20=0x205000 + +serdes_driver_current_lane0_ce21=0x4 +serdes_driver_current_lane1_ce21=0x2 +serdes_driver_current_lane2_ce21=0x2 +serdes_driver_current_lane3_ce21=0x2 +serdes_preemphasis_lane0_ce21=0x175900 +serdes_preemphasis_lane1_ce21=0x175900 +serdes_preemphasis_lane2_ce21=0x205000 +serdes_preemphasis_lane3_ce21=0x205000 + +serdes_driver_current_lane0_ce22=0x7 +serdes_driver_current_lane1_ce22=0x7 +serdes_driver_current_lane2_ce22=0x7 +serdes_driver_current_lane3_ce22=0x7 +serdes_preemphasis_lane0_ce22=0x254B00 +serdes_preemphasis_lane1_ce22=0x254B00 +serdes_preemphasis_lane2_ce22=0x254B00 +serdes_preemphasis_lane3_ce22=0x254B00 + +serdes_driver_current_lane0_ce23=0x7 +serdes_driver_current_lane1_ce23=0x7 +serdes_driver_current_lane2_ce23=0x7 +serdes_driver_current_lane3_ce23=0x7 +serdes_preemphasis_lane0_ce23=0x254B00 +serdes_preemphasis_lane1_ce23=0x254B00 +serdes_preemphasis_lane2_ce23=0x254B00 +serdes_preemphasis_lane3_ce23=0x254B00 + +serdes_driver_current_lane0_ce24=0xF +serdes_driver_current_lane1_ce24=0x8 +serdes_driver_current_lane2_ce24=0xF +serdes_driver_current_lane3_ce24=0x4 +serdes_preemphasis_lane0_ce24=0x153C1F +serdes_preemphasis_lane1_ce24=0x294700 +serdes_preemphasis_lane2_ce24=0x153C1F +serdes_preemphasis_lane3_ce24=0x294700 + +serdes_driver_current_lane0_ce25=0xF +serdes_driver_current_lane1_ce25=0x8 +serdes_driver_current_lane2_ce25=0xF +serdes_driver_current_lane3_ce25=0x4 +serdes_preemphasis_lane0_ce25=0x153C1F +serdes_preemphasis_lane1_ce25=0x294700 +serdes_preemphasis_lane2_ce25=0x153C1F +serdes_preemphasis_lane3_ce25=0x294700 + +serdes_driver_current_lane0_ce26=0xF +serdes_driver_current_lane1_ce26=0xA +serdes_driver_current_lane2_ce26=0xF +serdes_driver_current_lane3_ce26=0x9 +serdes_preemphasis_lane0_ce26=0x153C1F +serdes_preemphasis_lane1_ce26=0x304000 +serdes_preemphasis_lane2_ce26=0x153C1F +serdes_preemphasis_lane3_ce26=0x304000 + +serdes_driver_current_lane0_ce27=0xF +serdes_driver_current_lane1_ce27=0x9 +serdes_driver_current_lane2_ce27=0xF +serdes_driver_current_lane3_ce27=0x9 +serdes_preemphasis_lane0_ce27=0x153C1F +serdes_preemphasis_lane1_ce27=0x304000 +serdes_preemphasis_lane2_ce27=0x153C1F +serdes_preemphasis_lane3_ce27=0x304000 + +serdes_driver_current_lane0_ce28=0xF +serdes_driver_current_lane1_ce28=0xC +serdes_driver_current_lane2_ce28=0xF +serdes_driver_current_lane3_ce28=0xC +serdes_preemphasis_lane0_ce28=0x153C1F +serdes_preemphasis_lane1_ce28=0x183C10 +serdes_preemphasis_lane2_ce28=0x153C1F +serdes_preemphasis_lane3_ce28=0x1C3C10 + +serdes_driver_current_lane0_ce29=0xF +serdes_driver_current_lane1_ce29=0xC +serdes_driver_current_lane2_ce29=0xF +serdes_driver_current_lane3_ce29=0xC +serdes_preemphasis_lane0_ce29=0x153C1F +serdes_preemphasis_lane1_ce29=0x203C10 +serdes_preemphasis_lane2_ce29=0x153C1F +serdes_preemphasis_lane3_ce29=0x203C10 + +serdes_driver_current_lane0_ce30=0xF +serdes_driver_current_lane1_ce30=0xC +serdes_driver_current_lane2_ce30=0xF +serdes_driver_current_lane3_ce30=0xC +serdes_preemphasis_lane0_ce30=0x153C1F +serdes_preemphasis_lane1_ce30=0x243C10 +serdes_preemphasis_lane2_ce30=0x153C1F +serdes_preemphasis_lane3_ce30=0x243C08 + +serdes_driver_current_lane0_ce31=0xF +serdes_driver_current_lane1_ce31=0xC +serdes_driver_current_lane2_ce31=0xF +serdes_driver_current_lane3_ce31=0xE +serdes_preemphasis_lane0_ce31=0x153C1F +serdes_preemphasis_lane1_ce31=0x243C10 +serdes_preemphasis_lane2_ce31=0x153C1F +serdes_preemphasis_lane3_ce31=0x203C14 + +serdes_if_type_xe=14 +serdes_if_type_ce=14 diff --git a/device/mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/sai.profile b/device/mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/sai.profile index 5bf97eb31a4c..a58c3ac6eabf 100644 --- a/device/mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/sai.profile +++ b/device/mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-ly1200-32x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-ly1200-32x100G.config.bcm diff --git a/device/mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/th-ly1200-32x100G.config.bcm b/device/mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/th-ly1200-32x100G.config.bcm new file mode 100644 index 000000000000..84b2c572664f --- /dev/null +++ b/device/mitac/x86_64-mitac_ly1200_b32h0_c3-r0/MiTAC-LY1200-B32H0-C3/th-ly1200-32x100G.config.bcm @@ -0,0 +1,319 @@ +### BMS (start) +## Global settings +bcm_num_cos=8 +dport_map_indexed=0 + +## Switch settings +# Port number and bandwidth assignment. +portmap_1=1:100 +portmap_5=5:100 +portmap_9=9:100 +portmap_13=13:100 +portmap_17=17:100 +portmap_21=21:100 +portmap_25=25:100 +portmap_29=29:100 +portmap_34=33:100 +portmap_38=37:100 +portmap_42=41:100 +portmap_46=45:100 +portmap_50=49:100 +portmap_54=53:100 +portmap_58=57:100 +portmap_62=61:100 +portmap_68=65:100 +portmap_72=69:100 +portmap_76=73:100 +portmap_80=77:100 +portmap_84=81:100 +portmap_88=85:100 +portmap_92=89:100 +portmap_96=93:100 +portmap_102=97:100 +portmap_106=101:100 +portmap_110=105:100 +portmap_114=109:100 +portmap_118=113:100 +portmap_122=117:100 +portmap_126=121:100 +portmap_130=125:100 + +# pbmp_xport_xe is used to specify if a XPORT block is configured as xe port +# By default, an XPORT block is treated as HG port. +pbmp_xport_xe=0x0444444441111111104444444422222222 + +# Map dport number to internal port number . +dport_map_port_0=327 +dport_map_port_1=112 +dport_map_port_5=116 +dport_map_port_9=120 +dport_map_port_13=124 +dport_map_port_17=80 +dport_map_port_21=84 +dport_map_port_25=88 +dport_map_port_29=92 +dport_map_port_34=32 +dport_map_port_38=36 +dport_map_port_42=40 +dport_map_port_46=44 +dport_map_port_50=0 +dport_map_port_54=4 +dport_map_port_58=8 +dport_map_port_62=12 +dport_map_port_68=16 +dport_map_port_72=20 +dport_map_port_76=24 +dport_map_port_80=28 +dport_map_port_84=48 +dport_map_port_88=52 +dport_map_port_92=56 +dport_map_port_96=60 +dport_map_port_102=64 +dport_map_port_106=68 +dport_map_port_110=72 +dport_map_port_114=76 +dport_map_port_118=96 +dport_map_port_122=100 +dport_map_port_126=104 +dport_map_port_130=108 + +# Remap XGXS rx and tx lanes to desired mapping. Four bits were used for +# specifying each lane in the format of Lane 0 (bit 15-12), Lane 1 (bit 11-8), +# lane 2 (bit 7-4), and lane 3 (bit 3-0). +# For example, to reverse the tx lane mapping in 3, 2, 1, 0 order, +xgxs_tx_lane_map_ce0=0x3210 +xgxs_rx_lane_map_ce0=0x3210 +xgxs_tx_lane_map_ce4=0x3210 +xgxs_rx_lane_map_ce4=0x2103 +xgxs_tx_lane_map_ce8=0x3210 +xgxs_rx_lane_map_ce8=0x3210 +xgxs_tx_lane_map_ce12=0x3210 +xgxs_rx_lane_map_ce12=0x2103 +xgxs_tx_lane_map_ce16=0x0123 +xgxs_rx_lane_map_ce16=0x0123 +xgxs_tx_lane_map_ce20=0x3210 +xgxs_rx_lane_map_ce20=0x2103 +xgxs_tx_lane_map_ce24=0x3210 +xgxs_rx_lane_map_ce24=0x3210 +xgxs_tx_lane_map_ce28=0x0123 +xgxs_rx_lane_map_ce28=0x1203 +xgxs_tx_lane_map_ce32=0x3210 +xgxs_rx_lane_map_ce32=0x3210 +xgxs_tx_lane_map_ce36=0x2301 +xgxs_rx_lane_map_ce36=0x3120 +xgxs_tx_lane_map_ce40=0x3210 +xgxs_rx_lane_map_ce40=0x3210 +xgxs_tx_lane_map_ce44=0x3102 +xgxs_rx_lane_map_ce44=0x2301 +xgxs_tx_lane_map_ce48=0x3210 +xgxs_rx_lane_map_ce48=0x1203 +xgxs_tx_lane_map_ce52=0x0123 +xgxs_rx_lane_map_ce52=0x3210 +xgxs_tx_lane_map_ce56=0x3210 +xgxs_rx_lane_map_ce56=0x1203 +xgxs_tx_lane_map_ce60=0x0213 +xgxs_rx_lane_map_ce60=0x3210 +xgxs_tx_lane_map_ce64=0x3120 +xgxs_rx_lane_map_ce64=0x1032 +xgxs_tx_lane_map_ce68=0x0123 +xgxs_rx_lane_map_ce68=0x3012 +xgxs_tx_lane_map_ce72=0x1230 +xgxs_rx_lane_map_ce72=0x1032 +xgxs_tx_lane_map_ce76=0x0123 +xgxs_rx_lane_map_ce76=0x3012 +xgxs_tx_lane_map_ce80=0x0213 +xgxs_rx_lane_map_ce80=0x2031 +xgxs_tx_lane_map_ce84=0x2301 +xgxs_rx_lane_map_ce84=0x3120 +xgxs_tx_lane_map_ce88=0x3210 +xgxs_rx_lane_map_ce88=0x3210 +xgxs_tx_lane_map_ce92=0x2301 +xgxs_rx_lane_map_ce92=0x3120 +xgxs_tx_lane_map_ce96=0x3210 +xgxs_rx_lane_map_ce96=0x0321 +xgxs_tx_lane_map_ce100=0x0123 +xgxs_rx_lane_map_ce100=0x1032 +xgxs_tx_lane_map_ce104=0x0123 +xgxs_rx_lane_map_ce104=0x0123 +xgxs_tx_lane_map_ce108=0x3210 +xgxs_rx_lane_map_ce108=0x2103 +xgxs_tx_lane_map_ce112=0x0123 +xgxs_rx_lane_map_ce112=0x0123 +xgxs_tx_lane_map_ce116=0x0123 +xgxs_rx_lane_map_ce116=0x1230 +xgxs_tx_lane_map_ce120=0x0123 +xgxs_rx_lane_map_ce120=0x0123 +xgxs_tx_lane_map_ce124=0x0123 +xgxs_rx_lane_map_ce124=0x1230 + +# Config to describe the system Linerate or Oversubscribe mode. +# 0: Linerate only (default). +# 1: Oversubscribe mode (all ports will be oversub). +# 2: Mixed mode. Check device specification for applicability. Port bitmap specified via pbmp_oversubscribe. +oversubscribe_mode=1 + +# Set the default MMU lossless behavior. +mmu_lossless=0 + +# Set preemphasis +serdes_preemphasis_lane0_ce0=0x2c3c08 +serdes_preemphasis_lane1_ce0=0x2c3c08 +serdes_preemphasis_lane2_ce0=0x2c3c08 +serdes_preemphasis_lane3_ce0=0x2c3c08 + +serdes_preemphasis_lane0_ce4=0x2c3c08 +serdes_preemphasis_lane1_ce4=0x2c3c08 +serdes_preemphasis_lane2_ce4=0x2c3c08 +serdes_preemphasis_lane3_ce4=0x2c3c08 + +serdes_preemphasis_lane0_ce8=0x2c3c08 +serdes_preemphasis_lane1_ce8=0x2c3c08 +serdes_preemphasis_lane2_ce8=0x2c3c08 +serdes_preemphasis_lane3_ce8=0x2c3c08 + +serdes_preemphasis_lane0_ce12=0x2c3c08 +serdes_preemphasis_lane1_ce12=0x2c3c08 +serdes_preemphasis_lane2_ce12=0x2c3c08 +serdes_preemphasis_lane3_ce12=0x2c3c08 + +serdes_preemphasis_lane0_ce16=0x244408 +serdes_preemphasis_lane1_ce16=0x244408 +serdes_preemphasis_lane2_ce16=0x244408 +serdes_preemphasis_lane3_ce16=0x244408 + +serdes_preemphasis_lane0_ce20=0x244408 +serdes_preemphasis_lane1_ce20=0x244408 +serdes_preemphasis_lane2_ce20=0x244408 +serdes_preemphasis_lane3_ce20=0x244408 + +serdes_preemphasis_lane0_ce24=0x244408 +serdes_preemphasis_lane1_ce24=0x244408 +serdes_preemphasis_lane2_ce24=0x244408 +serdes_preemphasis_lane3_ce24=0x244408 + +serdes_preemphasis_lane0_ce28=0x244408 +serdes_preemphasis_lane1_ce28=0x244408 +serdes_preemphasis_lane2_ce28=0x244408 +serdes_preemphasis_lane3_ce28=0x244408 + +serdes_preemphasis_lane0_ce32=0x2c3c08 +serdes_preemphasis_lane1_ce32=0x2c3c08 +serdes_preemphasis_lane2_ce32=0x2c3c08 +serdes_preemphasis_lane3_ce32=0x2c3c08 + +serdes_preemphasis_lane0_ce36=0x2c3c08 +serdes_preemphasis_lane1_ce36=0x2c3c08 +serdes_preemphasis_lane2_ce36=0x2c3c08 +serdes_preemphasis_lane3_ce36=0x2c3c08 + +serdes_preemphasis_lane0_ce40=0x2c3c08 +serdes_preemphasis_lane1_ce40=0x2c3c08 +serdes_preemphasis_lane2_ce40=0x2c3c08 +serdes_preemphasis_lane3_ce40=0x2c3c08 + +serdes_preemphasis_lane0_ce44=0x244408 +serdes_preemphasis_lane1_ce44=0x244408 +serdes_preemphasis_lane2_ce44=0x244408 +serdes_preemphasis_lane3_ce44=0x244408 + +serdes_preemphasis_lane0_ce48=0x244408 +serdes_preemphasis_lane1_ce48=0x244408 +serdes_preemphasis_lane2_ce48=0x244408 +serdes_preemphasis_lane3_ce48=0x244408 + +serdes_preemphasis_lane0_ce52=0x244408 +serdes_preemphasis_lane1_ce52=0x244408 +serdes_preemphasis_lane2_ce52=0x244408 +serdes_preemphasis_lane3_ce52=0x244408 + +serdes_preemphasis_lane0_ce56=0x244408 +serdes_preemphasis_lane1_ce56=0x244408 +serdes_preemphasis_lane2_ce56=0x244408 +serdes_preemphasis_lane3_ce56=0x244408 + +serdes_preemphasis_lane0_ce60=0x244408 +serdes_preemphasis_lane1_ce60=0x244408 +serdes_preemphasis_lane2_ce60=0x244408 +serdes_preemphasis_lane3_ce60=0x244408 + +serdes_preemphasis_lane0_ce64=0x244408 +serdes_preemphasis_lane1_ce64=0x244408 +serdes_preemphasis_lane2_ce64=0x244408 +serdes_preemphasis_lane3_ce64=0x244408 + +serdes_preemphasis_lane0_ce68=0x244408 +serdes_preemphasis_lane1_ce68=0x244408 +serdes_preemphasis_lane2_ce68=0x244408 +serdes_preemphasis_lane3_ce68=0x244408 + +serdes_preemphasis_lane0_ce72=0x244408 +serdes_preemphasis_lane1_ce72=0x244408 +serdes_preemphasis_lane2_ce72=0x244408 +serdes_preemphasis_lane3_ce72=0x244408 + +serdes_preemphasis_lane0_ce76=0x244408 +serdes_preemphasis_lane1_ce76=0x244408 +serdes_preemphasis_lane2_ce76=0x244408 +serdes_preemphasis_lane3_ce76=0x244408 + +serdes_preemphasis_lane0_ce80=0x244408 +serdes_preemphasis_lane1_ce80=0x244408 +serdes_preemphasis_lane2_ce80=0x244408 +serdes_preemphasis_lane3_ce80=0x244408 + +serdes_preemphasis_lane0_ce84=0x2c3c08 +serdes_preemphasis_lane1_ce84=0x2c3c08 +serdes_preemphasis_lane2_ce84=0x2c3c08 +serdes_preemphasis_lane3_ce84=0x2c3c08 + +serdes_preemphasis_lane0_ce88=0x2c3c08 +serdes_preemphasis_lane1_ce88=0x2c3c08 +serdes_preemphasis_lane2_ce88=0x2c3c08 +serdes_preemphasis_lane3_ce88=0x2c3c08 + +serdes_preemphasis_lane0_ce92=0x2c3c08 +serdes_preemphasis_lane1_ce92=0x2c3c08 +serdes_preemphasis_lane2_ce92=0x2c3c08 +serdes_preemphasis_lane3_ce92=0x2c3c08 + +serdes_preemphasis_lane0_ce96=0x244408 +serdes_preemphasis_lane1_ce96=0x244408 +serdes_preemphasis_lane2_ce96=0x244408 +serdes_preemphasis_lane3_ce96=0x244408 + +serdes_preemphasis_lane0_ce100=0x244408 +serdes_preemphasis_lane1_ce100=0x244408 +serdes_preemphasis_lane2_ce100=0x244408 +serdes_preemphasis_lane3_ce100=0x244408 + +serdes_preemphasis_lane0_ce104=0x244408 +serdes_preemphasis_lane1_ce104=0x244408 +serdes_preemphasis_lane2_ce104=0x244408 +serdes_preemphasis_lane3_ce104=0x244408 + +serdes_preemphasis_lane0_ce108=0x244408 +serdes_preemphasis_lane1_ce108=0x244408 +serdes_preemphasis_lane2_ce108=0x244408 +serdes_preemphasis_lane3_ce108=0x244408 + +serdes_preemphasis_lane0_ce112=0x2c3c08 +serdes_preemphasis_lane1_ce112=0x2c3c08 +serdes_preemphasis_lane2_ce112=0x2c3c08 +serdes_preemphasis_lane3_ce112=0x2c3c08 + +serdes_preemphasis_lane0_ce116=0x2c3c08 +serdes_preemphasis_lane1_ce116=0x2c3c08 +serdes_preemphasis_lane2_ce116=0x2c3c08 +serdes_preemphasis_lane3_ce116=0x2c3c08 + +serdes_preemphasis_lane0_ce120=0x2c3c08 +serdes_preemphasis_lane1_ce120=0x2c3c08 +serdes_preemphasis_lane2_ce120=0x2c3c08 +serdes_preemphasis_lane3_ce120=0x2c3c08 + +serdes_preemphasis_lane0_ce124=0x2c3c08 +serdes_preemphasis_lane1_ce124=0x2c3c08 +serdes_preemphasis_lane2_ce124=0x2c3c08 +serdes_preemphasis_lane3_ce124=0x2c3c08 + +### BMS (end) \ No newline at end of file diff --git a/device/quanta/x86_64-quanta_ix1b_32x-r0/Quanta-IX1B-32X/sai.profile b/device/quanta/x86_64-quanta_ix1b_32x-r0/Quanta-IX1B-32X/sai.profile index fa4ce6c1de9d..fbd01105a4f3 100755 --- a/device/quanta/x86_64-quanta_ix1b_32x-r0/Quanta-IX1B-32X/sai.profile +++ b/device/quanta/x86_64-quanta_ix1b_32x-r0/Quanta-IX1B-32X/sai.profile @@ -1 +1 @@ -SAI_INIT_CONFIG_FILE=/etc/bcm/th-ix1b-32x100G.config.bcm +SAI_INIT_CONFIG_FILE=/usr/share/sonic/hwsku/th-ix1b-32x100G.config.bcm diff --git a/device/quanta/x86_64-quanta_ix1b_32x-r0/Quanta-IX1B-32X/th-ix1b-32x100G.config.bcm b/device/quanta/x86_64-quanta_ix1b_32x-r0/Quanta-IX1B-32X/th-ix1b-32x100G.config.bcm new file mode 100644 index 000000000000..f73d5be55cd4 --- /dev/null +++ b/device/quanta/x86_64-quanta_ix1b_32x-r0/Quanta-IX1B-32X/th-ix1b-32x100G.config.bcm @@ -0,0 +1,253 @@ +os=unix + +pbmp_xport_xe=0x3fd000000ff4000003fc000001fe +pbmp_oversubscribe=0x3fd000000ff4000003fc000001fe +l2xmsg_mode=1 + +schan_intr_enable=0 + +# Control to disable parity messages +parity_enable=1 + +# Control to disable parity correction +parity_correction=1 + +l2_mem_entries=<40960> +l3_mem_entries=<40960> + +portmap_1=1:100 +portmap_2=5:100 +portmap_3=9:100 +portmap_4=13:100 +portmap_5=17:100 +portmap_6=21:100 +portmap_7=25:100 +portmap_8=29:100 +portmap_34=33:100 +portmap_35=37:100 +portmap_36=41:100 +portmap_37=45:100 +portmap_38=49:100 +portmap_39=53:100 +portmap_40=57:100 +portmap_41=61:100 +portmap_68=65:100 +portmap_69=69:100 +portmap_70=73:100 +portmap_71=77:100 +portmap_72=81:100 +portmap_73=85:100 +portmap_74=89:100 +portmap_75=93:100 +portmap_102=97:100 +portmap_103=101:100 +portmap_104=105:100 +portmap_105=109:100 +portmap_106=113:100 +portmap_107=117:100 +portmap_108=121:100 +portmap_109=125:100 + +portmap_66=129:10 +portmap_100=131:10 +portmap_33=132:10 +portmap_67=133:10 +portmap_101=134:10 +portmap_135=135:10 + + +mem_cache_enable=1 +ctr_evict_enable=0 + +#mdio setting +rate_ext_mdio_divisor=0x2f +mdio_output_delay=15 + +#lanes swap and polarity +xgxs_rx_lane_map_1=0x3120 +phy_xaui_rx_polarity_flip_1=0xa +xgxs_tx_lane_map_1=0x1230 +phy_xaui_tx_polarity_flip_1=0x7 + +xgxs_rx_lane_map_2=0x3120 +phy_xaui_rx_polarity_flip_2=0xc +xgxs_tx_lane_map_2=0x0213 +phy_xaui_tx_polarity_flip_2=0x5 + +xgxs_rx_lane_map_3=0x2013 +phy_xaui_rx_polarity_flip_3=0xb +xgxs_tx_lane_map_3=0x3120 +phy_xaui_tx_polarity_flip_3=0x6 + +xgxs_rx_lane_map_4=0x2103 +phy_xaui_rx_polarity_flip_4=0xf +xgxs_tx_lane_map_4=0x3201 +phy_xaui_tx_polarity_flip_4=0x5 + +xgxs_rx_lane_map_5=0x1032 +phy_xaui_rx_polarity_flip_5=0x7 +xgxs_tx_lane_map_5=0x1302 +phy_xaui_tx_polarity_flip_5=0x0 + +xgxs_rx_lane_map_6=0x2103 +phy_xaui_rx_polarity_flip_6=0x3 +xgxs_tx_lane_map_6=0x3120 +phy_xaui_tx_polarity_flip_6=0x2 + +xgxs_rx_lane_map_7=0x0123 +phy_xaui_rx_polarity_flip_7=0x5 +xgxs_tx_lane_map_7=0x3012 +phy_xaui_tx_polarity_flip_7=0x3 + +xgxs_rx_lane_map_8=0x1032 +phy_xaui_rx_polarity_flip_8=0xf +xgxs_tx_lane_map_8=0x3120 +phy_xaui_tx_polarity_flip_8=0x2 + +xgxs_rx_lane_map_34=0x3021 +phy_xaui_rx_polarity_flip_34=0xa +xgxs_tx_lane_map_34=0x3210 +phy_xaui_tx_polarity_flip_34=0xf + +xgxs_rx_lane_map_35=0x2103 +phy_xaui_rx_polarity_flip_35=0x6 +xgxs_tx_lane_map_35=0x3120 +phy_xaui_tx_polarity_flip_35=0x5 + +xgxs_rx_lane_map_36=0x0312 +phy_xaui_rx_polarity_flip_36=0x4 +xgxs_tx_lane_map_36=0x3210 +phy_xaui_tx_polarity_flip_36=0x2 + +xgxs_rx_lane_map_37=0x0231 +phy_xaui_rx_polarity_flip_37=0x4 +xgxs_tx_lane_map_37=0x1032 +phy_xaui_tx_polarity_flip_37=0x2 + +xgxs_rx_lane_map_38=0x3012 +phy_xaui_rx_polarity_flip_38=0xa +xgxs_tx_lane_map_38=0x2103 +phy_xaui_tx_polarity_flip_38=0xd + +xgxs_rx_lane_map_39=0x0123 +phy_xaui_rx_polarity_flip_39=0x9 +xgxs_tx_lane_map_39=0x3120 +phy_xaui_tx_polarity_flip_39=0xd + +xgxs_rx_lane_map_40=0x2310 +phy_xaui_rx_polarity_flip_40=0x6 +xgxs_tx_lane_map_40=0x0123 + +xgxs_rx_lane_map_41=0x1230 +phy_xaui_rx_polarity_flip_41=0xa +xgxs_tx_lane_map_41=0x0123 +phy_xaui_tx_polarity_flip_41=0xe + +xgxs_rx_lane_map_68=0x1230 +phy_xaui_rx_polarity_flip_68=0xb +xgxs_tx_lane_map_68=0x3012 +phy_xaui_tx_polarity_flip_68=0xa + +xgxs_rx_lane_map_69=0x2310 +phy_xaui_rx_polarity_flip_69=0xf +xgxs_tx_lane_map_69=0x3120 +phy_xaui_tx_polarity_flip_69=0x2 + +xgxs_rx_lane_map_70=0x2310 +phy_xaui_rx_polarity_flip_70=0xe +xgxs_tx_lane_map_70=0x0213 +phy_xaui_tx_polarity_flip_70=0x2 + +xgxs_rx_lane_map_71=0x2130 +phy_xaui_rx_polarity_flip_71=0x5 +xgxs_tx_lane_map_71=0x3210 + +phy_xaui_rx_polarity_flip_72=0xa +xgxs_tx_lane_map_72=0x1230 + +xgxs_rx_lane_map_73=0x0213 +phy_xaui_rx_polarity_flip_73=0x5 +xgxs_tx_lane_map_73=0x1320 +phy_xaui_tx_polarity_flip_73=0x3 + +xgxs_rx_lane_map_74=0x2310 +phy_xaui_rx_polarity_flip_74=0xe +xgxs_tx_lane_map_74=0x2310 +phy_xaui_tx_polarity_flip_74=0xc + +xgxs_rx_lane_map_75=0x0321 +xgxs_tx_lane_map_75=0x2130 +phy_xaui_tx_polarity_flip_75=0x6 + +xgxs_rx_lane_map_102=0x1302 +phy_xaui_rx_polarity_flip_102=0x4 +xgxs_tx_lane_map_102=0x0123 +phy_xaui_tx_polarity_flip_102=0xa + +xgxs_tx_lane_map_103=0x2130 +phy_xaui_tx_polarity_flip_103=0x8 + +xgxs_rx_lane_map_104=0x1302 +phy_xaui_rx_polarity_flip_104=0xd +xgxs_tx_lane_map_104=0x1302 +phy_xaui_tx_polarity_flip_104=0x2 + +xgxs_rx_lane_map_105=0x1230 +phy_xaui_rx_polarity_flip_105=0x8 +xgxs_tx_lane_map_105=0x1320 + +xgxs_rx_lane_map_106=0x3120 +phy_xaui_rx_polarity_flip_106=0xc +xgxs_tx_lane_map_106=0x3120 +phy_xaui_tx_polarity_flip_106=0x0 + +xgxs_rx_lane_map_107=0x0321 +phy_xaui_rx_polarity_flip_107=0xa +xgxs_tx_lane_map_107=0x1032 +phy_xaui_tx_polarity_flip_107=0xf + +xgxs_rx_lane_map_108=0x0321 +phy_xaui_rx_polarity_flip_108=0xf +xgxs_tx_lane_map_108=0x3210 +phy_xaui_tx_polarity_flip_108=0x0 + +xgxs_rx_lane_map_109=0x0321 +phy_xaui_rx_polarity_flip_109=0xa +xgxs_tx_lane_map_109=0x3021 +phy_xaui_tx_polarity_flip_109=0x3 + +dport_map_port_68=1 +dport_map_port_69=2 +dport_map_port_70=3 +dport_map_port_71=4 +dport_map_port_37=5 +dport_map_port_36=6 +dport_map_port_39=7 +dport_map_port_38=8 +dport_map_port_41=9 +dport_map_port_40=10 +dport_map_port_35=11 +dport_map_port_34=12 +dport_map_port_72=13 +dport_map_port_73=14 +dport_map_port_74=15 +dport_map_port_75=16 +dport_map_port_102=17 +dport_map_port_103=18 +dport_map_port_104=19 +dport_map_port_105=20 +dport_map_port_8=21 +dport_map_port_7=22 +dport_map_port_2=23 +dport_map_port_1=24 +dport_map_port_4=25 +dport_map_port_3=26 +dport_map_port_6=27 +dport_map_port_5=28 +dport_map_port_106=29 +dport_map_port_107=30 +dport_map_port_108=31 +dport_map_port_109=32 +dport_map_port_66=33 +dport_map_port_100=34 + From 9413fa9a7bb9e50e300a6b79525ecb4d98efccb2 Mon Sep 17 00:00:00 2001 From: Shuotian Cheng Date: Mon, 20 Aug 2018 11:19:16 -0700 Subject: [PATCH 165/180] [interfaces]: Move IP/MTU information from interfaces file into database (#1908) - Move front panel ports and port channels MTU and IP configurations out of the current /etc/network/interfaces file and store them in the configuration database. - The default MTU value for both front panel ports and the port channels is 9100. They are set via the minigraph or 9100 by default. - Introduce portmgrd which will pick up the MTU configurations from the configuration database. - The updated intfmgrd will pick up IP address changes from the configuration database. - Update sonic-swss submodule Signed-off-by: Shu0T1an ChenG --- dockers/docker-orchagent/start.sh | 2 + dockers/docker-orchagent/supervisord.conf | 12 +++- files/image_config/interfaces/interfaces.j2 | 22 ------ platform/vs/docker-sonic-vs/start.sh | 2 + platform/vs/docker-sonic-vs/supervisord.conf | 18 +++-- src/sonic-config-engine/minigraph.py | 16 ++++- .../tests/sample_output/interfaces | 50 ------------- src/sonic-config-engine/tests/test_cfggen.py | 72 +++++++++---------- .../tests/test_minigraph_case.py | 2 +- src/sonic-swss | 2 +- 10 files changed, 80 insertions(+), 118 deletions(-) diff --git a/dockers/docker-orchagent/start.sh b/dockers/docker-orchagent/start.sh index 0321bf8428f4..9249dc5c0722 100755 --- a/dockers/docker-orchagent/start.sh +++ b/dockers/docker-orchagent/start.sh @@ -26,6 +26,8 @@ supervisorctl start vlanmgrd supervisorctl start intfmgrd +supervisorctl start portmgrd + supervisorctl start buffermgrd supervisorctl start enable_counters diff --git a/dockers/docker-orchagent/supervisord.conf b/dockers/docker-orchagent/supervisord.conf index 2369a4c31b05..8f96037f11b6 100644 --- a/dockers/docker-orchagent/supervisord.conf +++ b/dockers/docker-orchagent/supervisord.conf @@ -84,9 +84,17 @@ autorestart=false stdout_logfile=syslog stderr_logfile=syslog +[program:portmgrd] +command=/usr/bin/portmgrd +priority=11 +autostart=false +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog + [program:buffermgrd] command=/usr/bin/buffermgrd -l /usr/share/sonic/hwsku/pg_profile_lookup.ini -priority=10 +priority=12 autostart=false autorestart=false stdout_logfile=syslog @@ -94,7 +102,7 @@ stderr_logfile=syslog [program:enable_counters] command=/usr/bin/enable_counters.py -priority=11 +priority=13 autostart=false autorestart=false stdout_logfile=syslog diff --git a/files/image_config/interfaces/interfaces.j2 b/files/image_config/interfaces/interfaces.j2 index 924ff54af308..da2499ee5047 100644 --- a/files/image_config/interfaces/interfaces.j2 +++ b/files/image_config/interfaces/interfaces.j2 @@ -49,15 +49,6 @@ iface eth0 inet dhcp # {% endblock mgmt_interface %} {% block front_panel_interfaces %} -# The switch front panel interfaces -{% for (name, prefix) in INTERFACE %} -allow-hotplug {{ name }} -iface {{ name }} {{ 'inet' if prefix | ipv4 else 'inet6' }} static - mtu {{ PORT[name]['mtu'] if PORT[name]['mtu'] else 9100 }} - address {{ prefix | ip }} - netmask {{ prefix | netmask if prefix | ipv4 else prefix | prefixlen }} -# -{% endfor %} {% if PORTCHANNEL %} # "|| true" is added to suppress the error when interface is already a member of LAG # "ip link show | grep -q master" is added to ensure interface is enslaved @@ -73,16 +64,3 @@ iface {{ member }} inet manual {% endfor %} {% endif %} {% endblock front_panel_interfaces %} -{% block pc_interfaces %} -{% if PORTCHANNEL_INTERFACE %} -# Portchannel interfaces -{% for (name, prefix) in PORTCHANNEL_INTERFACE.keys() | sort %} -allow-hotplug {{ name }} -iface {{ name }} {{ 'inet' if prefix | ipv4 else 'inet6' }} static - mtu {{ PORTCHANNEL[name]['mtu'] if PORTCHANNEL[name]['mtu'] else 9100 }} - address {{ prefix | ip }} - netmask {{ prefix | netmask if prefix | ipv4 else prefix | prefixlen }} -# -{% endfor %} -{% endif %} -{% endblock pc_interfaces %} diff --git a/platform/vs/docker-sonic-vs/start.sh b/platform/vs/docker-sonic-vs/start.sh index 960cc242b862..d16e9535c218 100755 --- a/platform/vs/docker-sonic-vs/start.sh +++ b/platform/vs/docker-sonic-vs/start.sh @@ -42,6 +42,8 @@ supervisorctl start teamsyncd supervisorctl start fpmsyncd +supervisorctl start portmgrd + supervisorctl start intfmgrd supervisorctl start vlanmgrd diff --git a/platform/vs/docker-sonic-vs/supervisord.conf b/platform/vs/docker-sonic-vs/supervisord.conf index a4b24334d1bd..1f6dfad60cf0 100644 --- a/platform/vs/docker-sonic-vs/supervisord.conf +++ b/platform/vs/docker-sonic-vs/supervisord.conf @@ -91,9 +91,17 @@ autorestart=false stdout_logfile=syslog stderr_logfile=syslog +[program:portmgrd] +command=/usr/bin/portmgrd +priority=12 +autostart=false +autorestart=false +stdout_logfile=syslog +stderr_logfile=syslog + [program:zebra] command=/usr/lib/quagga/zebra -A 127.0.0.1 -priority=12 +priority=13 autostart=false autorestart=false stdout_logfile=syslog @@ -101,7 +109,7 @@ stderr_logfile=syslog [program:bgpd] command=/usr/lib/quagga/bgpd -A 127.0.0.1 -F -priority=13 +priority=14 autostart=false autorestart=false stdout_logfile=syslog @@ -109,7 +117,7 @@ stderr_logfile=syslog [program:fpmsyncd] command=/usr/bin/fpmsyncd -priority=14 +priority=15 autostart=false autorestart=false stdout_logfile=syslog @@ -117,7 +125,7 @@ stderr_logfile=syslog [program:arp_update] command=/usr/bin/arp_update -priority=15 +priority=16 autostart=false autorestart=unexpected stdout_logfile=syslog @@ -125,7 +133,7 @@ stderr_logfile=syslog [program:buffermgrd] command=/usr/bin/buffermgrd -l /usr/share/sonic/device/vswitch/pg_profile_lookup.ini -priority=10 +priority=17 autostart=false autorestart=false stdout_logfile=syslog diff --git a/src/sonic-config-engine/minigraph.py b/src/sonic-config-engine/minigraph.py index 19a4b0ceba7a..a990ec6a2067 100644 --- a/src/sonic-config-engine/minigraph.py +++ b/src/sonic-config-engine/minigraph.py @@ -91,7 +91,7 @@ def parse_png(png, hname): 'flow_control': flowcontrol } continue - + if linktype != "DeviceInterfaceLink" and linktype != "UnderlayInterfaceLink": continue @@ -516,6 +516,15 @@ def parse_xml(filename, platform=None, port_config_file=None): ports.setdefault(port_name, {})['description'] = port_descriptions[port_name] + # set default port MTU as 9100 + for port in ports.itervalues(): + port['mtu'] = '9100' + + # set physical port default admin status up + for port in phyport_intfs: + if port[0] in ports: + ports.get(port[0])['admin_status'] = 'up' + results['PORT'] = ports results['CONSOLE_PORT'] = console_ports @@ -528,6 +537,11 @@ def parse_xml(filename, platform=None, port_config_file=None): print >> sys.stderr, "Warning: ignore '%s' as part of its member interfaces is not in the port_config.ini" % pc_name del pcs[pc_name] + # set default port channel MTU as 9100 and admin status up + for pc in pcs.itervalues(): + pc['mtu'] = '9100' + pc['admin_status'] = 'up' + results['PORTCHANNEL'] = pcs diff --git a/src/sonic-config-engine/tests/sample_output/interfaces b/src/sonic-config-engine/tests/sample_output/interfaces index e3f09afd1a83..c471c0aa8d60 100644 --- a/src/sonic-config-engine/tests/sample_output/interfaces +++ b/src/sonic-config-engine/tests/sample_output/interfaces @@ -47,7 +47,6 @@ iface eth0 inet6 static down ip -6 route delete 2603:10e2:0:2902::/64 dev eth0 table default down ip -6 rule delete from 2603:10e2:0:2902::8/128 table default # -# The switch front panel interfaces # "|| true" is added to suppress the error when interface is already a member of LAG # "ip link show | grep -q master" is added to ensure interface is enslaved allow-hotplug fortyGigE0/112 @@ -74,53 +73,4 @@ iface fortyGigE0/124 inet manual post-up ip link show fortyGigE0/124 | grep -q master && ifconfig fortyGigE0/124 up post-down ifconfig fortyGigE0/124 down # -# Portchannel interfaces -allow-hotplug PortChannel01 -iface PortChannel01 inet static - mtu 9100 - address 10.0.0.56 - netmask 255.255.255.254 -# -allow-hotplug PortChannel01 -iface PortChannel01 inet6 static - mtu 9100 - address fc00::71 - netmask 126 -# -allow-hotplug PortChannel02 -iface PortChannel02 inet static - mtu 9100 - address 10.0.0.58 - netmask 255.255.255.254 -# -allow-hotplug PortChannel02 -iface PortChannel02 inet6 static - mtu 9100 - address fc00::75 - netmask 126 -# -allow-hotplug PortChannel03 -iface PortChannel03 inet static - mtu 9100 - address 10.0.0.60 - netmask 255.255.255.254 -# -allow-hotplug PortChannel03 -iface PortChannel03 inet6 static - mtu 9100 - address fc00::79 - netmask 126 -# -allow-hotplug PortChannel04 -iface PortChannel04 inet static - mtu 9100 - address 10.0.0.62 - netmask 255.255.255.254 -# -allow-hotplug PortChannel04 -iface PortChannel04 inet6 static - mtu 9100 - address fc00::7d - netmask 126 -# diff --git a/src/sonic-config-engine/tests/test_cfggen.py b/src/sonic-config-engine/tests/test_cfggen.py index d88f0525d546..a4f35021e1da 100644 --- a/src/sonic-config-engine/tests/test_cfggen.py +++ b/src/sonic-config-engine/tests/test_cfggen.py @@ -115,12 +115,12 @@ def test_minigraph_vlan_interfaces(self): def test_minigraph_portchannels(self): argument = '-m "' + self.sample_graph_simple + '" -p "' + self.port_config + '" -v PORTCHANNEL' output = self.run_script(argument) - self.assertEqual(output.strip(), "{'PortChannel01': {'members': ['Ethernet4']}}") + self.assertEqual(output.strip(), "{'PortChannel01': {'admin_status': 'up', 'members': ['Ethernet4'], 'mtu': '9100'}}") def test_minigraph_portchannels_more_member(self): argument = '-m "' + self.sample_graph_pc_test + '" -p "' + self.port_config + '" -v PORTCHANNEL' output = self.run_script(argument) - self.assertEqual(output.strip(), "{'PortChannel01': {'members': ['Ethernet112', 'Ethernet116', 'Ethernet120', 'Ethernet124']}}") + self.assertEqual(output.strip(), "{'PortChannel01': {'admin_status': 'up', 'members': ['Ethernet112', 'Ethernet116', 'Ethernet120', 'Ethernet124'], 'mtu': '9100'}}") def test_minigraph_portchannel_interfaces(self): argument = '-m "' + self.sample_graph_simple + '" -p "' + self.port_config + '" -v "PORTCHANNEL_INTERFACE.keys()"' @@ -159,47 +159,47 @@ def test_minigraph_deployment_id(self): def test_minigraph_ethernet_interfaces(self): argument = '-m "' + self.sample_graph_simple + '" -p "' + self.port_config + '" -v "PORT[\'Ethernet8\']"' output = self.run_script(argument) - self.assertEqual(output.strip(), "{'alias': 'fortyGigE0/8', 'lanes': '37,38,39,40', 'description': 'Interface description', 'speed': '1000'}") + self.assertEqual(output.strip(), "{'alias': 'fortyGigE0/8', 'lanes': '37,38,39,40', 'description': 'Interface description', 'speed': '1000', 'mtu': '9100'}") argument = '-m "' + self.sample_graph_simple + '" -p "' + self.port_config + '" -v "PORT[\'Ethernet12\']"' output = self.run_script(argument) - self.assertEqual(output.strip(), "{'alias': 'fortyGigE0/12', 'lanes': '33,34,35,36', 'fec': 'rs', 'speed': '100000', 'description': 'Interface description'}") + self.assertEqual(output.strip(), "{'lanes': '33,34,35,36', 'description': 'Interface description', 'mtu': '9100', 'alias': 'fortyGigE0/12', 'speed': '100000', 'fec': 'rs'}") def test_minigraph_extra_ethernet_interfaces(self): argument = '-m "' + self.sample_graph_simple + '" -p "' + self.port_config + '" -v "PORT"' output = self.run_script(argument) self.assertEqual(output.strip(), \ - "{'Ethernet8': {'alias': 'fortyGigE0/8', 'lanes': '37,38,39,40', 'description': 'Interface description', 'speed': '1000'}, " - "'Ethernet0': {'alias': 'fortyGigE0/0', 'lanes': '29,30,31,32', 'speed': '10000'}, " - "'Ethernet4': {'alias': 'fortyGigE0/4', 'lanes': '25,26,27,28', 'speed': '25000'}, " - "'Ethernet108': {'alias': 'fortyGigE0/108', 'lanes': '81,82,83,84'}, " - "'Ethernet100': {'alias': 'fortyGigE0/100', 'lanes': '125,126,127,128'}, " - "'Ethernet104': {'alias': 'fortyGigE0/104', 'lanes': '85,86,87,88'}, " - "'Ethernet68': {'alias': 'fortyGigE0/68', 'lanes': '69,70,71,72'}, " - "'Ethernet96': {'alias': 'fortyGigE0/96', 'lanes': '121,122,123,124'}, " - "'Ethernet124': {'alias': 'fortyGigE0/124', 'lanes': '101,102,103,104'}, " - "'Ethernet92': {'alias': 'fortyGigE0/92', 'lanes': '113,114,115,116'}, " - "'Ethernet120': {'alias': 'fortyGigE0/120', 'lanes': '97,98,99,100'}, " - "'Ethernet52': {'alias': 'fortyGigE0/52', 'lanes': '53,54,55,56'}, " - "'Ethernet56': {'alias': 'fortyGigE0/56', 'lanes': '61,62,63,64'}, " - "'Ethernet76': {'alias': 'fortyGigE0/76', 'lanes': '73,74,75,76'}, " - "'Ethernet72': {'alias': 'fortyGigE0/72', 'lanes': '77,78,79,80'}, " - "'Ethernet64': {'alias': 'fortyGigE0/64', 'lanes': '65,66,67,68'}, " - "'Ethernet32': {'alias': 'fortyGigE0/32', 'lanes': '9,10,11,12'}, " - "'Ethernet16': {'alias': 'fortyGigE0/16', 'lanes': '41,42,43,44'}, " - "'Ethernet36': {'alias': 'fortyGigE0/36', 'lanes': '13,14,15,16'}, " - "'Ethernet12': {'alias': 'fortyGigE0/12', 'lanes': '33,34,35,36', 'fec': 'rs', 'speed': '100000', 'description': 'Interface description'}, " - "'Ethernet88': {'alias': 'fortyGigE0/88', 'lanes': '117,118,119,120'}, " - "'Ethernet116': {'alias': 'fortyGigE0/116', 'lanes': '93,94,95,96'}, " - "'Ethernet80': {'alias': 'fortyGigE0/80', 'lanes': '105,106,107,108'}, " - "'Ethernet112': {'alias': 'fortyGigE0/112', 'lanes': '89,90,91,92'}, " - "'Ethernet84': {'alias': 'fortyGigE0/84', 'lanes': '109,110,111,112'}, " - "'Ethernet48': {'alias': 'fortyGigE0/48', 'lanes': '49,50,51,52'}, " - "'Ethernet44': {'alias': 'fortyGigE0/44', 'lanes': '17,18,19,20'}, " - "'Ethernet40': {'alias': 'fortyGigE0/40', 'lanes': '21,22,23,24'}, " - "'Ethernet28': {'alias': 'fortyGigE0/28', 'lanes': '1,2,3,4'}, " - "'Ethernet60': {'alias': 'fortyGigE0/60', 'lanes': '57,58,59,60'}, " - "'Ethernet20': {'alias': 'fortyGigE0/20', 'lanes': '45,46,47,48'}, " - "'Ethernet24': {'alias': 'fortyGigE0/24', 'lanes': '5,6,7,8'}}") + "{'Ethernet8': {'alias': 'fortyGigE0/8', 'lanes': '37,38,39,40', 'description': 'Interface description', 'speed': '1000', 'mtu': '9100'}, " + "'Ethernet0': {'alias': 'fortyGigE0/0', 'admin_status': 'up', 'lanes': '29,30,31,32', 'speed': '10000', 'mtu': '9100'}, " + "'Ethernet4': {'alias': 'fortyGigE0/4', 'lanes': '25,26,27,28', 'speed': '25000', 'mtu': '9100'}, " + "'Ethernet108': {'alias': 'fortyGigE0/108', 'lanes': '81,82,83,84', 'mtu': '9100'}, " + "'Ethernet100': {'alias': 'fortyGigE0/100', 'lanes': '125,126,127,128', 'mtu': '9100'}, " + "'Ethernet104': {'alias': 'fortyGigE0/104', 'lanes': '85,86,87,88', 'mtu': '9100'}, " + "'Ethernet68': {'alias': 'fortyGigE0/68', 'lanes': '69,70,71,72', 'mtu': '9100'}, " + "'Ethernet96': {'alias': 'fortyGigE0/96', 'lanes': '121,122,123,124', 'mtu': '9100'}, " + "'Ethernet124': {'alias': 'fortyGigE0/124', 'lanes': '101,102,103,104', 'mtu': '9100'}, " + "'Ethernet92': {'alias': 'fortyGigE0/92', 'lanes': '113,114,115,116', 'mtu': '9100'}, " + "'Ethernet120': {'alias': 'fortyGigE0/120', 'lanes': '97,98,99,100', 'mtu': '9100'}, " + "'Ethernet52': {'alias': 'fortyGigE0/52', 'lanes': '53,54,55,56', 'mtu': '9100'}, " + "'Ethernet56': {'alias': 'fortyGigE0/56', 'lanes': '61,62,63,64', 'mtu': '9100'}, " + "'Ethernet76': {'alias': 'fortyGigE0/76', 'lanes': '73,74,75,76', 'mtu': '9100'}, " + "'Ethernet72': {'alias': 'fortyGigE0/72', 'lanes': '77,78,79,80', 'mtu': '9100'}, " + "'Ethernet64': {'alias': 'fortyGigE0/64', 'lanes': '65,66,67,68', 'mtu': '9100'}, " + "'Ethernet32': {'alias': 'fortyGigE0/32', 'lanes': '9,10,11,12', 'mtu': '9100'}, " + "'Ethernet16': {'alias': 'fortyGigE0/16', 'lanes': '41,42,43,44', 'mtu': '9100'}, " + "'Ethernet36': {'alias': 'fortyGigE0/36', 'lanes': '13,14,15,16', 'mtu': '9100'}, " + "'Ethernet12': {'lanes': '33,34,35,36', 'description': 'Interface description', 'mtu': '9100', 'alias': 'fortyGigE0/12', 'speed': '100000', 'fec': 'rs'}, " + "'Ethernet88': {'alias': 'fortyGigE0/88', 'lanes': '117,118,119,120', 'mtu': '9100'}, " + "'Ethernet116': {'alias': 'fortyGigE0/116', 'lanes': '93,94,95,96', 'mtu': '9100'}, " + "'Ethernet80': {'alias': 'fortyGigE0/80', 'lanes': '105,106,107,108', 'mtu': '9100'}, " + "'Ethernet112': {'alias': 'fortyGigE0/112', 'lanes': '89,90,91,92', 'mtu': '9100'}, " + "'Ethernet84': {'alias': 'fortyGigE0/84', 'lanes': '109,110,111,112', 'mtu': '9100'}, " + "'Ethernet48': {'alias': 'fortyGigE0/48', 'lanes': '49,50,51,52', 'mtu': '9100'}, " + "'Ethernet44': {'alias': 'fortyGigE0/44', 'lanes': '17,18,19,20', 'mtu': '9100'}, " + "'Ethernet40': {'alias': 'fortyGigE0/40', 'lanes': '21,22,23,24', 'mtu': '9100'}, " + "'Ethernet28': {'alias': 'fortyGigE0/28', 'lanes': '1,2,3,4', 'mtu': '9100'}, " + "'Ethernet60': {'alias': 'fortyGigE0/60', 'lanes': '57,58,59,60', 'mtu': '9100'}, " + "'Ethernet20': {'alias': 'fortyGigE0/20', 'lanes': '45,46,47,48', 'mtu': '9100'}, " + "'Ethernet24': {'alias': 'fortyGigE0/24', 'lanes': '5,6,7,8', 'mtu': '9100'}}") def test_metadata_everflow(self): argument = '-m "' + self.sample_graph_metadata + '" -p "' + self.port_config + '" -v "MIRROR_SESSION"' diff --git a/src/sonic-config-engine/tests/test_minigraph_case.py b/src/sonic-config-engine/tests/test_minigraph_case.py index 85110f56f7b9..6a4849c71480 100644 --- a/src/sonic-config-engine/tests/test_minigraph_case.py +++ b/src/sonic-config-engine/tests/test_minigraph_case.py @@ -87,7 +87,7 @@ def test_minigraph_vlan_interfaces(self): def test_minigraph_portchannels(self): argument = '-m "' + self.sample_graph + '" -p "' + self.port_config + '" -v PORTCHANNEL' output = self.run_script(argument) - self.assertEqual(output.strip(), "{'PortChannel01': {'members': ['Ethernet4']}}") + self.assertEqual(output.strip(), "{'PortChannel01': {'admin_status': 'up', 'members': ['Ethernet4'], 'mtu': '9100'}}") def test_minigraph_console_port(self): argument = '-m "' + self.sample_graph + '" -p "' + self.port_config + '" -v CONSOLE_PORT' diff --git a/src/sonic-swss b/src/sonic-swss index 902239ad4c67..8bfdea086f14 160000 --- a/src/sonic-swss +++ b/src/sonic-swss @@ -1 +1 @@ -Subproject commit 902239ad4c67c8e85da296b00badbc08b9820001 +Subproject commit 8bfdea086f14bbe420846d42c607760999cbdcc3 From d9527ec5cb3108a3c5da4f5965ff290e1419ebad Mon Sep 17 00:00:00 2001 From: Shuotian Cheng Date: Mon, 20 Aug 2018 11:19:28 -0700 Subject: [PATCH 166/180] [utilities]: Update sonic-utilities submodule (#1949) Signed-off-by: Shu0T1an ChenG --- src/sonic-utilities | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-utilities b/src/sonic-utilities index 747d5c386299..951633b02606 160000 --- a/src/sonic-utilities +++ b/src/sonic-utilities @@ -1 +1 @@ -Subproject commit 747d5c386299a8fac2acb4f4594fe2498d33df36 +Subproject commit 951633b02606768b458b7dc88f6c6f8ca736db4e From 454690506e5151070f895e0f0997734e22967c90 Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Mon, 20 Aug 2018 21:10:49 -0700 Subject: [PATCH 167/180] [kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u2) (#1955) * [kernel]: upgrade kernel to 4.9.0-7 (4.9.110-3+deb9u2) Signed-off-by: Qi Luo * Update submodule Signed-off-by: Qi Luo --- rules/linux-kernel.mk | 2 +- src/sonic-linux-kernel | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/rules/linux-kernel.mk b/rules/linux-kernel.mk index 7c9e7b2c07aa..05caf384bcc6 100644 --- a/rules/linux-kernel.mk +++ b/rules/linux-kernel.mk @@ -3,7 +3,7 @@ KVERSION_SHORT = 4.9.0-7 KVERSION = $(KVERSION_SHORT)-amd64 KERNEL_VERSION = 4.9.110 -KERNEL_SUBVERSION = 3+deb9u1 +KERNEL_SUBVERSION = 3+deb9u2 export KVERSION_SHORT KVERSION KERNEL_VERSION KERNEL_SUBVERSION diff --git a/src/sonic-linux-kernel b/src/sonic-linux-kernel index 7c97ae923c9e..2991f0de99b0 160000 --- a/src/sonic-linux-kernel +++ b/src/sonic-linux-kernel @@ -1 +1 @@ -Subproject commit 7c97ae923c9ec9b2006ed275e8780233b32b28f6 +Subproject commit 2991f0de99b004d6336348d2da638bb58e51d152 From c692d2dcd0e7417a1d4cdf77350ac5f82de4519d Mon Sep 17 00:00:00 2001 From: Qi Luo Date: Tue, 21 Aug 2018 00:00:46 -0700 Subject: [PATCH 168/180] [baseimage]: Build specific revision of initramfs-tools (#1957) Signed-off-by: Qi Luo --- src/initramfs-tools/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/src/initramfs-tools/Makefile b/src/initramfs-tools/Makefile index c92d1b54838a..0b08e4aa431e 100644 --- a/src/initramfs-tools/Makefile +++ b/src/initramfs-tools/Makefile @@ -5,6 +5,8 @@ SHELL = /bin/bash MAIN_TARGET = initramfs-tools_$(INITRAMFS_TOOLS_VERSION)_all.deb DERIVED_TARGETS = initramfs-tools-core_$(INITRAMFS_TOOLS_VERSION)_all.deb +INITRAMFS_TOOLS_REVISION = 18fc98e1b63b012f9bcf06ae3f5477872a5880c0 + $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # Obtaining the initramfs-tools rm -rf ./initramfs-tools @@ -12,6 +14,7 @@ $(addprefix $(DEST)/, $(MAIN_TARGET)): $(DEST)/% : # Patch pushd ./initramfs-tools + git checkout $(INITRAMFS_TOOLS_REVISION) patch -p1 < ../loopback-file-system-support.patch # Build the package From 450cb04176bba90ef82062e8e69860b348ba2b2e Mon Sep 17 00:00:00 2001 From: Shuotian Cheng Date: Tue, 21 Aug 2018 00:55:39 -0700 Subject: [PATCH 169/180] [utilities]: Update sonic-utilities submodule (#1956) Signed-off-by: Shu0T1an ChenG --- src/sonic-utilities | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-utilities b/src/sonic-utilities index 951633b02606..c14d917ec8e4 160000 --- a/src/sonic-utilities +++ b/src/sonic-utilities @@ -1 +1 @@ -Subproject commit 951633b02606768b458b7dc88f6c6f8ca736db4e +Subproject commit c14d917ec8e45983bedef82460ea1903a595b19f From 788b20ee1255c89ec8dd6254c961dda17c0bc223 Mon Sep 17 00:00:00 2001 From: Samuel Angebault Date: Tue, 21 Aug 2018 00:58:16 -0700 Subject: [PATCH 170/180] [arista]: Fix mount point discovery in boot0 for overlayfs (#1959) On overlay filesystem the name of the mountpoint will also match in the mount command for overlayfs as upperdir= To prevent detecting the wrong partition we now look for space before. This ensure that we match mountpoint and not devices in df and mount outputs. --- files/Aboot/boot0.j2 | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/files/Aboot/boot0.j2 b/files/Aboot/boot0.j2 index 89a5299c4c67..4bb1a279ff31 100644 --- a/files/Aboot/boot0.j2 +++ b/files/Aboot/boot0.j2 @@ -63,6 +63,7 @@ cmdline_base="$target_path/kernel-params-base" cmdline_image="$image_path/kernel-cmdline" bootconfigvars="KERNEL INITRD CONSOLESPEED PASSWORD NETDEV NETAUTO NETIP NETMASK NETGW NETDOMAIN NETDNS NETHW memtest" +flash_re=" /mnt/flash| /host" parse_environment_config() { for n in ${bootconfigvars}; do @@ -148,7 +149,8 @@ platform_specific() { # set varlog size to 100MB local varlog_size=100 - local flash_size=$(($(df | grep -E '/mnt/flash|/host' | tr -s ' ' | cut -f2 -d' ') / 1000)) + # detect the size of the flash partition from name in Aboot/EOS/SONiC + local flash_size=$(($(df | grep -E "$flash_re" | tr -s ' ' | cut -f2 -d' ') / 1000)) if [ "$platform" = "raven" ]; then aboot_machine=arista_7050_qx32 @@ -241,8 +243,8 @@ write_boot_configs() { # setting root partition if not overridden by kernel-params if ! grep -q "root=" /tmp/append; then - rootdev="$(mount | grep -E '/mnt/flash|/host' | cut -f1 -d' ')" - rootfstype="$(mount | grep -E '/mnt/flash|/host' | cut -f5 -d' ')" + rootdev="$(mount | grep -E "$flash_re" | cut -f1 -d' ')" + rootfstype="$(mount | grep -E "$flash_re" | cut -f5 -d' ')" rootuuid="$(get_uuid_for $rootdev)" if [ -z "$rootuuid" ] || [ "$rootfstype" = "vfat" ] ; then echo "root=$rootdev" >> /tmp/append From a01791ebcde120493cf847058659dd2b57b332e9 Mon Sep 17 00:00:00 2001 From: lguohan Date: Tue, 21 Aug 2018 10:10:58 -0700 Subject: [PATCH 171/180] [vs-test]: support python docker 3.5.0 (#1958) * [vs-test]: support python docker 3.5.0 Signed-off-by: Guohan Lu --- platform/vs/tests/bgp/test_invalid_nexthop.py | 4 +- platform/vs/tests/bgp/test_no_export.py | 6 +-- platform/vs/tests/conftest.py | 40 ++++++++++--------- 3 files changed, 26 insertions(+), 24 deletions(-) diff --git a/platform/vs/tests/bgp/test_invalid_nexthop.py b/platform/vs/tests/bgp/test_invalid_nexthop.py index b6e7cfc86e5e..616f26df6e61 100644 --- a/platform/vs/tests/bgp/test_invalid_nexthop.py +++ b/platform/vs/tests/bgp/test_invalid_nexthop.py @@ -22,11 +22,11 @@ def test_InvalidNexthop(dvs): time.sleep(10) - output = dvs.runcmd(["vtysh", "-c", "show ipv6 bgp"]) + (exit_code, output) = dvs.runcmd(["vtysh", "-c", "show ipv6 bgp"]) p.terminate() p = p.wait() - print output + print exit_code, output assert "3333::/64" in output diff --git a/platform/vs/tests/bgp/test_no_export.py b/platform/vs/tests/bgp/test_no_export.py index 371d5f0b29ec..57f9bb322b01 100644 --- a/platform/vs/tests/bgp/test_no_export.py +++ b/platform/vs/tests/bgp/test_no_export.py @@ -27,9 +27,9 @@ def test_bounce(dvs): time.sleep(60) - sum_res = dvs.runcmd(["vtysh", "-c", "show ip bgp sum"]) - all_route = dvs.runcmd(["vtysh", "-c", "show ip bgp"]) - announce_route = dvs.runcmd(["vtysh", "-c", "show ip bgp neighbors 10.0.0.3 advertised-routes"]) + (exit_code, sum_res) = dvs.runcmd(["vtysh", "-c", "show ip bgp sum"]) + (exit_code, all_route) = dvs.runcmd(["vtysh", "-c", "show ip bgp"]) + (exit_code, announce_route) = dvs.runcmd(["vtysh", "-c", "show ip bgp neighbors 10.0.0.3 advertised-routes"]) p1.terminate() p1 = p1.wait() diff --git a/platform/vs/tests/conftest.py b/platform/vs/tests/conftest.py index 48ad7e15661a..8acaed5e9062 100644 --- a/platform/vs/tests/conftest.py +++ b/platform/vs/tests/conftest.py @@ -55,20 +55,7 @@ def __init__(self, dvs): keys = atbl.getKeys() assert len(keys) >= 1 - # Filter out DTel Acl tables - default_table_found = False - for k in keys: - if default_table_found: - break - (status, fvs) = atbl.get(k) - for item in fvs: - if item[0] == "SAI_ACL_TABLE_ATTR_ACL_BIND_POINT_TYPE_LIST": - if 'SAI_ACL_BIND_POINT_TYPE_PORT' in item[1]: - self.default_acl_table = k - default_table_found = True - break - else: - break + self.default_acl_tables = keys atbl = swsscommon.Table(self.adb, "ASIC_STATE:SAI_OBJECT_TYPE_ACL_ENTRY") keys = atbl.getKeys() @@ -179,9 +166,13 @@ def __init__(self, name=None): network_mode="container:%s" % self.ctn_sw.name, volumes={ self.mount: { 'bind': '/var/run/redis', 'mode': 'rw' } }) - self.ctn.exec_run("sysctl -w net.ipv6.conf.all.disable_ipv6=0") - self.check_ready() - self.init_asicdb_validator() + try: + self.ctn.exec_run("sysctl -w net.ipv6.conf.all.disable_ipv6=0") + self.check_ready() + self.init_asicdb_validator() + except: + self.destroy() + raise def destroy(self): if self.cleanup: @@ -199,7 +190,11 @@ def check_ready(self, timeout=30): started = 0 while True: # get process status - out = self.ctn.exec_run("supervisorctl status") + res = self.ctn.exec_run("supervisorctl status") + try: + out = res.output + except AttributeError: + out = res for l in out.split('\n'): fds = re_space.split(l) if len(fds) < 2: @@ -231,7 +226,14 @@ def init_asicdb_validator(self): self.asicdb = AsicDbValidator(self) def runcmd(self, cmd): - return self.ctn.exec_run(cmd) + res = self.ctn.exec_run(cmd) + try: + exitcode = res.exit_code + out = res.output + except AttributeError: + exitcode = 0 + out = res + return (exitcode, out) def copy_file(self, path, filename): tarstr = StringIO.StringIO() From de0e892eaae23111b3cce50606936f04d775d5e4 Mon Sep 17 00:00:00 2001 From: yurypm Date: Tue, 21 Aug 2018 23:19:31 +0100 Subject: [PATCH 172/180] [arista] Fix arista-convertfs script (#1961) --- files/initramfs-tools/arista-convertfs.j2 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/files/initramfs-tools/arista-convertfs.j2 b/files/initramfs-tools/arista-convertfs.j2 index 81de6750837a..1fc4db6ecfdb 100644 --- a/files/initramfs-tools/arista-convertfs.j2 +++ b/files/initramfs-tools/arista-convertfs.j2 @@ -185,7 +185,7 @@ cmd="wait_for_root_dev" run_cmd "$cmd" "$err_msg" err_msg="Error: formatting to ext4 failed" -cmd="mke2fs -t ext4 -m2 -F -O '^huge_file' $root_dev" +cmd="mke2fs -t ext4 -F -O '^huge_file,^metadata_csum' $root_dev" run_cmd "$cmd" "$err_msg" err_msg="Error: mounting $root_dev to $root_mnt failed" From d7be9a41c0eb053b8a0d52fb7f8e1f2d13dce165 Mon Sep 17 00:00:00 2001 From: Samuel Angebault Date: Wed, 22 Aug 2018 02:37:53 -0700 Subject: [PATCH 173/180] [kernel]: Update sonic-linux-kernel pointer (#1964) --- src/sonic-linux-kernel | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/sonic-linux-kernel b/src/sonic-linux-kernel index 2991f0de99b0..c87ebef623b6 160000 --- a/src/sonic-linux-kernel +++ b/src/sonic-linux-kernel @@ -1 +1 @@ -Subproject commit 2991f0de99b004d6336348d2da638bb58e51d152 +Subproject commit c87ebef623b60455edbdd71e33ac2c204b9e681d From ada11409b2506f0a854783e2c77fb684fb5349c3 Mon Sep 17 00:00:00 2001 From: Volodymyr Samotiy Date: Wed, 22 Aug 2018 19:08:08 +0300 Subject: [PATCH 174/180] [mellanox]: Fix sysfs path for PSU devices in psuutil plugin (#1966) Signed-off-by: Volodymyr Samotiy --- device/mellanox/x86_64-mlnx_msn2100-r0/plugins/psuutil.py | 4 ++-- device/mellanox/x86_64-mlnx_msn2410-r0/plugins/psuutil.py | 4 ++-- device/mellanox/x86_64-mlnx_msn2700-r0/plugins/psuutil.py | 4 ++-- device/mellanox/x86_64-mlnx_msn2740-r0/plugins/psuutil.py | 4 ++-- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/psuutil.py b/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/psuutil.py index 88bdd51e9b67..01954dededf7 100644 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/psuutil.py +++ b/device/mellanox/x86_64-mlnx_msn2100-r0/plugins/psuutil.py @@ -21,9 +21,9 @@ class PsuUtil(PsuBase): def __init__(self): PsuBase.__init__(self) - self.psu_path = "/sys/bus/i2c/devices/2-0060/" + self.psu_path = "/bsp/module/" self.psu_presence = "psu{}_status" - self.psu_oper_status = "psu{}_pg_status" + self.psu_oper_status = "psu{}_pwr_status" def get_num_psus(self): """ diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/psuutil.py b/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/psuutil.py index 301569c13a94..13738bb77f46 100644 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/psuutil.py +++ b/device/mellanox/x86_64-mlnx_msn2410-r0/plugins/psuutil.py @@ -21,9 +21,9 @@ class PsuUtil(PsuBase): def __init__(self): PsuBase.__init__(self) - self.psu_path = "/sys/bus/i2c/devices/2-0060/" + self.psu_path = "/bsp/module/" self.psu_presence = "psu{}_status" - self.psu_oper_status = "psu{}_pg_status" + self.psu_oper_status = "psu{}_pwr_status" def get_num_psus(self): """ diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/psuutil.py b/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/psuutil.py index 301569c13a94..13738bb77f46 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/psuutil.py +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/plugins/psuutil.py @@ -21,9 +21,9 @@ class PsuUtil(PsuBase): def __init__(self): PsuBase.__init__(self) - self.psu_path = "/sys/bus/i2c/devices/2-0060/" + self.psu_path = "/bsp/module/" self.psu_presence = "psu{}_status" - self.psu_oper_status = "psu{}_pg_status" + self.psu_oper_status = "psu{}_pwr_status" def get_num_psus(self): """ diff --git a/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/psuutil.py b/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/psuutil.py index 301569c13a94..13738bb77f46 100644 --- a/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/psuutil.py +++ b/device/mellanox/x86_64-mlnx_msn2740-r0/plugins/psuutil.py @@ -21,9 +21,9 @@ class PsuUtil(PsuBase): def __init__(self): PsuBase.__init__(self) - self.psu_path = "/sys/bus/i2c/devices/2-0060/" + self.psu_path = "/bsp/module/" self.psu_presence = "psu{}_status" - self.psu_oper_status = "psu{}_pg_status" + self.psu_oper_status = "psu{}_pwr_status" def get_num_psus(self): """ From 80c6453731275126be83956237d24309ee3f7c0b Mon Sep 17 00:00:00 2001 From: lguohan Date: Wed, 22 Aug 2018 13:02:32 -0700 Subject: [PATCH 175/180] [swss]: simplify swss systemd service file (#1965) move the swss service start/stop logic into /usr/local/bin/swss.sh Signed-off-by: Guohan Lu --- .../build_templates/sonic_debian_extension.j2 | 4 ++ files/build_templates/swss.service.j2 | 38 +------------ files/scripts/swss.sh | 57 +++++++++++++++++++ 3 files changed, 64 insertions(+), 35 deletions(-) create mode 100755 files/scripts/swss.sh diff --git a/files/build_templates/sonic_debian_extension.j2 b/files/build_templates/sonic_debian_extension.j2 index b43e616e1756..9a4af3c3c637 100644 --- a/files/build_templates/sonic_debian_extension.j2 +++ b/files/build_templates/sonic_debian_extension.j2 @@ -27,6 +27,7 @@ set -x -e . functions.sh BUILD_TEMPLATES=files/build_templates IMAGE_CONFIGS=files/image_config +SCRIPTS_DIR=files/scripts # Define target fold macro FILESYSTEM_ROOT_USR="$FILESYSTEM_ROOT/usr" @@ -292,6 +293,9 @@ sudo LANG=C chroot $FILESYSTEM_ROOT fuser -km /sys || true sudo LANG=C chroot $FILESYSTEM_ROOT umount -lf /sys {% endif %} +# Copy swss service script +sudo LANG=C cp $SCRIPTS_DIR/swss.sh $FILESYSTEM_ROOT/usr/local/bin/swss.sh + # Copy systemd timer configuration # It implements delayed start of services sudo cp $BUILD_TEMPLATES/snmp.timer $FILESYSTEM_ROOT/etc/systemd/system/ diff --git a/files/build_templates/swss.service.j2 b/files/build_templates/swss.service.j2 index 08e3f50e2697..61fff9721aed 100644 --- a/files/build_templates/swss.service.j2 +++ b/files/build_templates/swss.service.j2 @@ -16,41 +16,9 @@ After=nps-modules-4.9.0-7-amd64.service [Service] User=root -# Wait for redis server start before database clean -ExecStartPre=/bin/bash -c 'until [[ $(/usr/bin/docker exec database redis-cli ping | grep -c PONG) -gt 0 ]]; do sleep 1; done' -ExecStartPre=/usr/bin/docker exec database redis-cli -n 0 FLUSHDB -ExecStartPre=/usr/bin/docker exec database redis-cli -n 1 FLUSHDB -ExecStartPre=/usr/bin/docker exec database redis-cli -n 2 FLUSHDB -ExecStartPre=/usr/bin/docker exec database redis-cli -n 5 FLUSHDB -ExecStartPre=/usr/bin/docker exec database redis-cli -n 6 FLUSHDB - -{% if sonic_asic_platform == 'mellanox' %} -Environment=FAST_BOOT=1 -TimeoutStartSec=3min -ExecStartPre=/usr/bin/mst start -ExecStartPre=/usr/bin/mlnx-fw-upgrade.sh -ExecStartPre=/etc/init.d/sxdkernel start -ExecStartPre=/sbin/modprobe i2c-dev -ExecStartPre=/bin/bash -c "/etc/mlnx/mlnx-hw-management start" -{% elif sonic_asic_platform == 'cavium' %} -ExecStartPre=/etc/init.d/xpnet.sh start -{% endif %} - -ExecStartPre=/usr/bin/{{docker_container_name}}.sh start -ExecStartPre=/usr/bin/syncd.sh start -ExecStart=/usr/bin/{{docker_container_name}}.sh attach - -ExecStop=/usr/bin/{{docker_container_name}}.sh stop -ExecStopPost=/usr/bin/syncd.sh stop - -{% if sonic_asic_platform == 'mellanox' %} -ExecStopPost=/bin/bash -c "/etc/mlnx/mlnx-hw-management stop" -ExecStopPost=/etc/init.d/sxdkernel stop -ExecStopPost=/usr/bin/mst stop -{% elif sonic_asic_platform == 'cavium' %} -ExecStopPost=/etc/init.d/xpnet.sh stop -ExecStopPost=/etc/init.d/xpnet.sh start -{% endif %} +Environment=sonic_asic_platform={{ sonic_asic_platform }} +ExecStart=/usr/local/bin/swss.sh start +ExecStop=/usr/local/bin/swss.sh stop [Install] WantedBy=multi-user.target diff --git a/files/scripts/swss.sh b/files/scripts/swss.sh new file mode 100755 index 000000000000..de46c0fbe7fc --- /dev/null +++ b/files/scripts/swss.sh @@ -0,0 +1,57 @@ +#!/bin/bash + +start() { + # Wait for redis server start before database clean + until [[ $(/usr/bin/docker exec database redis-cli ping | grep -c PONG) -gt 0 ]]; + do sleep 1; + done + + # Flush DB + /usr/bin/docker exec database redis-cli -n 0 FLUSHDB + /usr/bin/docker exec database redis-cli -n 1 FLUSHDB + /usr/bin/docker exec database redis-cli -n 2 FLUSHDB + /usr/bin/docker exec database redis-cli -n 5 FLUSHDB + /usr/bin/docker exec database redis-cli -n 6 FLUSHDB + + # platform specific tasks + if [ x$sonic_asic_platform == x'mellanox' ]; then + FAST_BOOT=1 + /usr/bin/mst start + /usr/bin/mlnx-fw-upgrade.sh + /etc/init.d/sxdkernel start + /sbin/modprobe i2c-dev + /etc/mlnx/mlnx-hw-management start + elif [ x$sonic_asic_platform == x'cavium' ]; then + /etc/init.d/xpnet.sh start + fi + + # start swss and syncd docker + /usr/bin/swss.sh start + /usr/bin/syncd.sh start + /usr/bin/swss.sh attach +} + +stop() { + /usr/bin/swss.sh stop + /usr/bin/syncd.sh stop + + # platform specific tasks + if [ x$sonic_asic_platform == x'mellanox' ]; then + /etc/mlnx/mlnx-hw-management stop + /etc/init.d/sxdkernel stop + /usr/bin/mst stop + elif [ x$sonic_asic_platform == x'cavium' ]; then + /etc/init.d/xpnet.sh stop + /etc/init.d/xpnet.sh start + fi +} + +case "$1" in + start|stop) + $1 + ;; + *) + echo "Usage: $0 {start|stop}" + exit 1 + ;; +esac From a5fd3beb1b177ce7e5bd32d899d64e9c0ad41791 Mon Sep 17 00:00:00 2001 From: Wenda Ni Date: Wed, 22 Aug 2018 13:03:52 -0700 Subject: [PATCH 176/180] [mellanox]: Enable WRED red color profile on mellanox platform (#1968) Signed-off-by: Wenda --- device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2 | 2 ++ device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2 | 2 ++ device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 | 2 ++ .../x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2 | 2 ++ 4 files changed, 8 insertions(+) diff --git a/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2 b/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2 index b1759cb42118..a11c77f7cc24 100644 --- a/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2 +++ b/device/mellanox/x86_64-mlnx_msn2100-r0/ACS-MSN2100/qos.json.j2 @@ -154,6 +154,7 @@ "AZURE_LOSSY": { "wred_green_enable":"true", "wred_yellow_enable":"true", + "wred_red_enable":"true", "ecn":"ecn_all", "red_max_threshold":"516096", "red_min_threshold":"516096", @@ -165,6 +166,7 @@ "AZURE_LOSSLESS": { "wred_green_enable":"true", "wred_yellow_enable":"true", + "wred_red_enable":"true", "ecn":"ecn_all", "red_max_threshold":"516096", "red_min_threshold":"516096", diff --git a/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2 b/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2 index b1759cb42118..a11c77f7cc24 100644 --- a/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2 +++ b/device/mellanox/x86_64-mlnx_msn2410-r0/ACS-MSN2410/qos.json.j2 @@ -154,6 +154,7 @@ "AZURE_LOSSY": { "wred_green_enable":"true", "wred_yellow_enable":"true", + "wred_red_enable":"true", "ecn":"ecn_all", "red_max_threshold":"516096", "red_min_threshold":"516096", @@ -165,6 +166,7 @@ "AZURE_LOSSLESS": { "wred_green_enable":"true", "wred_yellow_enable":"true", + "wred_red_enable":"true", "ecn":"ecn_all", "red_max_threshold":"516096", "red_min_threshold":"516096", diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 index b1759cb42118..a11c77f7cc24 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/ACS-MSN2700/qos.json.j2 @@ -154,6 +154,7 @@ "AZURE_LOSSY": { "wred_green_enable":"true", "wred_yellow_enable":"true", + "wred_red_enable":"true", "ecn":"ecn_all", "red_max_threshold":"516096", "red_min_threshold":"516096", @@ -165,6 +166,7 @@ "AZURE_LOSSLESS": { "wred_green_enable":"true", "wred_yellow_enable":"true", + "wred_red_enable":"true", "ecn":"ecn_all", "red_max_threshold":"516096", "red_min_threshold":"516096", diff --git a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2 b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2 index b1759cb42118..a11c77f7cc24 100644 --- a/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2 +++ b/device/mellanox/x86_64-mlnx_msn2700-r0/Mellanox-SN2700-D48C8/qos.json.j2 @@ -154,6 +154,7 @@ "AZURE_LOSSY": { "wred_green_enable":"true", "wred_yellow_enable":"true", + "wred_red_enable":"true", "ecn":"ecn_all", "red_max_threshold":"516096", "red_min_threshold":"516096", @@ -165,6 +166,7 @@ "AZURE_LOSSLESS": { "wred_green_enable":"true", "wred_yellow_enable":"true", + "wred_red_enable":"true", "ecn":"ecn_all", "red_max_threshold":"516096", "red_min_threshold":"516096", From 7eacb683c470471ffe16baa809d4fe1e6fe20f78 Mon Sep 17 00:00:00 2001 From: Ying Xie Date: Wed, 22 Aug 2018 13:04:58 -0700 Subject: [PATCH 177/180] [baseimage]: update make file for initramfs-tools (#1967) Call add_extra_package instead add_derived_package. Because the 'extra' package doesn't require 'base' package to be installed to be built. This change enables make stretch with multiple threads. Signed-off-by: Ying Xie --- rules/initramfs-tools.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/rules/initramfs-tools.mk b/rules/initramfs-tools.mk index 3b797762dc28..badc584dd2be 100644 --- a/rules/initramfs-tools.mk +++ b/rules/initramfs-tools.mk @@ -8,6 +8,6 @@ $(INITRAMFS_TOOLS)_SRC_PATH = $(SRC_PATH)/initramfs-tools SONIC_MAKE_DEBS += $(INITRAMFS_TOOLS) INITRAMFS_TOOLS_CORE = initramfs-tools-core_$(INITRAMFS_TOOLS_VERSION)_all.deb -$(eval $(call add_derived_package,$(INITRAMFS_TOOLS),$(INITRAMFS_TOOLS_CORE))) +$(eval $(call add_extra_package,$(INITRAMFS_TOOLS),$(INITRAMFS_TOOLS_CORE))) SONIC_STRETCH_DEBS += $(INITRAMFS_TOOLS) $(INITRAMFS_TOOLS_CORE) From a99008356b81f93f4c6cffbb17e4727020f9e175 Mon Sep 17 00:00:00 2001 From: Shuotian Cheng Date: Wed, 22 Aug 2018 17:12:05 -0700 Subject: [PATCH 178/180] [dell]: Remove depmod -a from the platform initialization script (#1954) depmod -a will be executed automatically after the package get installed Signed-off-by: Shu0T1an ChenG --- .../sonic-platform-modules-dell/s6100/scripts/s6100_platform.sh | 1 - .../sonic-platform-modules-dell/z9100/scripts/z9100_platform.sh | 1 - .../z9264f/scripts/z9264f_platform.sh | 1 - 3 files changed, 3 deletions(-) diff --git a/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/s6100_platform.sh b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/s6100_platform.sh index 8dd76f2ea6d3..be143cb9efe7 100755 --- a/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/s6100_platform.sh +++ b/platform/broadcom/sonic-platform-modules-dell/s6100/scripts/s6100_platform.sh @@ -174,7 +174,6 @@ switch_board_qsfp_lpmode() { init_devnum if [[ "$1" == "init" ]]; then - depmod -a modprobe i2c-dev modprobe i2c-mux-pca954x force_deselect_on_exit=1 modprobe dell_s6100_iom_cpld diff --git a/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/z9100_platform.sh b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/z9100_platform.sh index 3c3fe31e9cbd..6b62144eedac 100755 --- a/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/z9100_platform.sh +++ b/platform/broadcom/sonic-platform-modules-dell/z9100/scripts/z9100_platform.sh @@ -139,7 +139,6 @@ switch_board_qsfp() { init_devnum if [[ "$1" == "init" ]]; then - depmod -a modprobe i2c-dev modprobe i2c-mux-pca954x force_deselect_on_exit=1 modprobe dell_mailbox diff --git a/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/z9264f_platform.sh b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/z9264f_platform.sh index a899a53a9ffb..e38914319342 100755 --- a/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/z9264f_platform.sh +++ b/platform/broadcom/sonic-platform-modules-dell/z9264f/scripts/z9264f_platform.sh @@ -102,7 +102,6 @@ switch_board_modsel() { init_devnum if [ "$1" == "init" ]; then - depmod -a modprobe i2c-dev modprobe i2c-mux-pca954x force_deselect_on_exit=1 modprobe i2c_ocores From 27bdc00be397e3a30eb81fe63584002cec490bf5 Mon Sep 17 00:00:00 2001 From: Wirut Getbamrung Date: Fri, 24 Aug 2018 03:43:05 +0700 Subject: [PATCH 179/180] [platform/device] - Update Haliburton platform modules and device configuration (#1975) * Add psuutil and sfputil support * Fixed fancontrol issue * Add sensor's label * Update haliburton platform modules --- .../Celestica-E1031-T48S4/port_config.ini | 106 +-- .../celestica/x86_64-cel_e1031-r0/fancontrol | 10 +- .../x86_64-cel_e1031-r0/plugins/psuutil.py | 61 ++ .../x86_64-cel_e1031-r0/plugins/sfputil.py | 123 +++ .../x86_64-cel_e1031-r0/sensors.conf | 39 +- platform/broadcom/platform-modules-cel.mk | 4 +- .../debian/changelog | 11 +- .../debian/platform-modules-haliburton.init | 20 +- .../platform-modules-haliburton.install | 1 + .../platform-modules-haliburton.postinst | 3 + .../haliburton/modules/Makefile | 2 +- .../haliburton/modules/smc.c | 777 ++++++++++++++++++ .../platform-modules-haliburton.service | 14 + 13 files changed, 1086 insertions(+), 85 deletions(-) create mode 100644 device/celestica/x86_64-cel_e1031-r0/plugins/psuutil.py create mode 100644 device/celestica/x86_64-cel_e1031-r0/plugins/sfputil.py create mode 100644 platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.postinst create mode 100644 platform/broadcom/sonic-platform-modules-cel/haliburton/modules/smc.c create mode 100644 platform/broadcom/sonic-platform-modules-cel/haliburton/systemd/platform-modules-haliburton.service diff --git a/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/port_config.ini b/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/port_config.ini index 6a7debfa45f6..a2b64ea155df 100644 --- a/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/port_config.ini +++ b/device/celestica/x86_64-cel_e1031-r0/Celestica-E1031-T48S4/port_config.ini @@ -1,53 +1,53 @@ -# name lanes speed alias autoneg -Ethernet0 2 1000 etp1 1 -Ethernet1 1 1000 etp2 1 -Ethernet2 4 1000 etp3 1 -Ethernet3 3 1000 etp4 1 -Ethernet4 6 1000 etp5 1 -Ethernet5 5 1000 etp6 1 -Ethernet6 8 1000 etp7 1 -Ethernet7 7 1000 etp8 1 -Ethernet8 10 1000 etp9 1 -Ethernet9 9 1000 etp10 1 -Ethernet10 12 1000 etp11 1 -Ethernet11 11 1000 etp12 1 -Ethernet12 14 1000 etp13 1 -Ethernet13 13 1000 etp14 1 -Ethernet14 16 1000 etp15 1 -Ethernet15 15 1000 etp16 1 -Ethernet16 18 1000 etp17 1 -Ethernet17 17 1000 etp18 1 -Ethernet18 20 1000 etp19 1 -Ethernet19 19 1000 etp20 1 -Ethernet20 22 1000 etp21 1 -Ethernet21 21 1000 etp22 1 -Ethernet22 24 1000 etp23 1 -Ethernet23 23 1000 etp24 1 -Ethernet24 26 1000 etp25 1 -Ethernet25 25 1000 etp26 1 -Ethernet26 28 1000 etp27 1 -Ethernet27 27 1000 etp28 1 -Ethernet28 30 1000 etp29 1 -Ethernet29 29 1000 etp30 1 -Ethernet30 32 1000 etp31 1 -Ethernet31 31 1000 etp32 1 -Ethernet32 34 1000 etp33 1 -Ethernet33 33 1000 etp34 1 -Ethernet34 36 1000 etp35 1 -Ethernet35 35 1000 etp36 1 -Ethernet36 38 1000 etp37 1 -Ethernet37 37 1000 etp38 1 -Ethernet38 40 1000 etp39 1 -Ethernet39 39 1000 etp40 1 -Ethernet40 42 1000 etp41 1 -Ethernet41 41 1000 etp42 1 -Ethernet42 44 1000 etp43 1 -Ethernet43 43 1000 etp44 1 -Ethernet44 46 1000 etp45 1 -Ethernet45 45 1000 etp46 1 -Ethernet46 48 1000 etp47 1 -Ethernet47 47 1000 etp48 1 -Ethernet48 54 10000 etp49 0 -Ethernet49 53 10000 etp50 0 -Ethernet50 56 10000 etp51 0 -Ethernet51 55 10000 etp52 0 +# name lanes index speed alias autoneg +Ethernet0 2 1 1000 etp1 1 +Ethernet1 1 2 1000 etp2 1 +Ethernet2 4 3 1000 etp3 1 +Ethernet3 3 4 1000 etp4 1 +Ethernet4 6 5 1000 etp5 1 +Ethernet5 5 6 1000 etp6 1 +Ethernet6 8 7 1000 etp7 1 +Ethernet7 7 8 1000 etp8 1 +Ethernet8 10 9 1000 etp9 1 +Ethernet9 9 10 1000 etp10 1 +Ethernet10 12 11 1000 etp11 1 +Ethernet11 11 12 1000 etp12 1 +Ethernet12 14 13 1000 etp13 1 +Ethernet13 13 14 1000 etp14 1 +Ethernet14 16 15 1000 etp15 1 +Ethernet15 15 16 1000 etp16 1 +Ethernet16 18 17 1000 etp17 1 +Ethernet17 17 18 1000 etp18 1 +Ethernet18 20 19 1000 etp19 1 +Ethernet19 19 20 1000 etp20 1 +Ethernet20 22 21 1000 etp21 1 +Ethernet21 21 22 1000 etp22 1 +Ethernet22 24 23 1000 etp23 1 +Ethernet23 23 24 1000 etp24 1 +Ethernet24 26 25 1000 etp25 1 +Ethernet25 25 26 1000 etp26 1 +Ethernet26 28 27 1000 etp27 1 +Ethernet27 27 28 1000 etp28 1 +Ethernet28 30 29 1000 etp29 1 +Ethernet29 29 30 1000 etp30 1 +Ethernet30 32 31 1000 etp31 1 +Ethernet31 31 32 1000 etp32 1 +Ethernet32 34 33 1000 etp33 1 +Ethernet33 33 34 1000 etp34 1 +Ethernet34 36 35 1000 etp35 1 +Ethernet35 35 36 1000 etp36 1 +Ethernet36 38 37 1000 etp37 1 +Ethernet37 37 38 1000 etp38 1 +Ethernet38 40 39 1000 etp39 1 +Ethernet39 39 40 1000 etp40 1 +Ethernet40 42 41 1000 etp41 1 +Ethernet41 41 42 1000 etp42 1 +Ethernet42 44 43 1000 etp43 1 +Ethernet43 43 44 1000 etp44 1 +Ethernet44 46 45 1000 etp45 1 +Ethernet45 45 46 1000 etp46 1 +Ethernet46 48 47 1000 etp47 1 +Ethernet47 47 48 1000 etp48 1 +Ethernet48 54 49 10000 etp49 0 +Ethernet49 53 50 10000 etp50 0 +Ethernet50 56 51 10000 etp51 0 +Ethernet51 55 52 10000 etp52 0 diff --git a/device/celestica/x86_64-cel_e1031-r0/fancontrol b/device/celestica/x86_64-cel_e1031-r0/fancontrol index a94c63055fd7..27c6dcb78e2c 100644 --- a/device/celestica/x86_64-cel_e1031-r0/fancontrol +++ b/device/celestica/x86_64-cel_e1031-r0/fancontrol @@ -1,12 +1,12 @@ # Configuration file generated by pwmconfig, changes will be lost INTERVAL=2 -DEVPATH=hwmon3=devices/pci0000:00/0000:00:13.0/i2c-0/i2c-8/i2c-23/23-004d/ hwmon2=devices/pci0000:00/0000:00:13.0/i2c-0/i2c-8/i2c-11/11-001a/hwmon/hwmon2 +DEVPATH=hwmon3=devices/pci0000:00/0000:00:13.0/i2c-0/i2c-8/i2c-23/23-004d hwmon2=devices/pci0000:00/0000:00:13.0/i2c-0/i2c-8/i2c-11/11-001a DEVNAME=hwmon3=emc2305 hwmon2=max6697 -FCTEMPS=hwmon3/pwm1=hwmon2/temp2_input hwmon3/pwm2=hwmon2/temp2_input hwmon3/pwm4=hwmon2/temp2_input +FCTEMPS=hwmon3/device/pwm1=hwmon2/temp2_input hwmon3/device/pwm2=hwmon2/temp2_input hwmon3/device/pwm4=hwmon2/temp2_input FCFANS=hwmon3/device/pwm1=hwmon3/device/fan1_input hwmon3/device/pwm2=hwmon3/device/fan2_input hwmon3/device/pwm4=hwmon3/device/fan4_input MINTEMP=hwmon3/device/pwm1=29 hwmon3/device/pwm2=29 hwmon3/device/pwm4=29 MAXTEMP=hwmon3/device/pwm1=44 hwmon3/device/pwm2=44 hwmon3/device/pwm4=44 -MINSTART=hwmon3/device/pwm1=102 hwmon3/device/pwm2=102 hwmon3/device/pwm4=102 -MINSTOP=hwmon3/device/pwm1=102 hwmon3/device/pwm2=102 hwmon3/device/pwm4=102 -MINPWM=hwmon3/device/pwm1=102 hwmon3/device/pwm2=102 hwmon3/device/pwm4=102 +MINSTART=hwmon3/device/pwm1=102 hwmon3/device/pwm2=102 hwmon3/device/pwm4=102 +MINSTOP=hwmon3/device/pwm1=102 hwmon3/device/pwm2=102 hwmon3/device/pwm4=102 +MINPWM=hwmon3/device/pwm1=102 hwmon3/device/pwm2=102 hwmon3/device/pwm4=102 MAXPWM=hwmon3/device/pwm1=255 hwmon3/device/pwm2=255 hwmon3/device/pwm4=255 diff --git a/device/celestica/x86_64-cel_e1031-r0/plugins/psuutil.py b/device/celestica/x86_64-cel_e1031-r0/plugins/psuutil.py new file mode 100644 index 000000000000..71b8d4ad3c59 --- /dev/null +++ b/device/celestica/x86_64-cel_e1031-r0/plugins/psuutil.py @@ -0,0 +1,61 @@ +#!/usr/bin/env python + +import os.path + +try: + from sonic_psu.psu_base import PsuBase +except ImportError as e: + raise ImportError(str(e) + "- required module not found") + + +class PsuUtil(PsuBase): + """Platform-specific PSUutil class""" + + def __init__(self): + PsuBase.__init__(self) + + self.psu_path = "/sys/devices/platform/e1031.smc/" + self.psu_presence = "psu{}_prs" + self.psu_oper_status = "psu{}_status" + + def get_num_psus(self): + """ + Retrieves the number of PSUs available on the device + + :return: An integer, the number of PSUs available on the device + """ + return 2 + + def get_psu_status(self, index): + """ + Retrieves the oprational status of power supply unit (PSU) defined by 1-based index + + :param index: An integer, 1-based index of the PSU of which to query status + :return: Boolean, True if PSU is operating properly, False if PSU is faulty + """ + psu_location = ["R", "L"] + status = 0 + try: + with open(self.psu_path + self.psu_oper_status.format(psu_location[index - 1]), 'r') as power_status: + status = int(power_status.read()) + except IOError: + return False + + return status == 1 + + def get_psu_presence(self, index): + """ + Retrieves the presence status of power supply unit (PSU) defined by 1-based index + + :param index: An integer, 1-based index of the PSU of which to query status + :return: Boolean, True if PSU is plugged, False if not + """ + psu_location = ["R", "L"] + status = 0 + try: + with open(self.psu_path + self.psu_presence.format(psu_location[index - 1]), 'r') as psu_prs: + status = int(psu_prs.read()) + except IOError: + return False + + return status == 1 diff --git a/device/celestica/x86_64-cel_e1031-r0/plugins/sfputil.py b/device/celestica/x86_64-cel_e1031-r0/plugins/sfputil.py new file mode 100644 index 000000000000..851fb9ccc071 --- /dev/null +++ b/device/celestica/x86_64-cel_e1031-r0/plugins/sfputil.py @@ -0,0 +1,123 @@ +#!/usr/bin/env python + +try: + import time + import os + from sonic_sfp.sfputilbase import SfpUtilBase +except ImportError as e: + raise ImportError("%s - required module not found" % str(e)) + + +class SfpUtil(SfpUtilBase): + """Platform-specific SfpUtil class""" + + PORT_START = 1 + PORT_END = 52 + port_to_i2c_mapping = { + 1 : None, + 2 : None, + 3 : None, + 4 : None, + 5 : None, + 6 : None, + 7 : None, + 8 : None, + 9 : None, + 10 : None, + 11 : None, + 12 : None, + 13 : None, + 14 : None, + 15 : None, + 16 : None, + 17 : None, + 18 : None, + 19 : None, + 20 : None, + 21 : None, + 22 : None, + 23 : None, + 24 : None, + 25 : None, + 26 : None, + 27 : None, + 28 : None, + 29 : None, + 30 : None, + 31 : None, + 32 : None, + 33 : None, + 34 : None, + 35 : None, + 36 : None, + 37 : None, + 38 : None, + 39 : None, + 40 : None, + 41 : None, + 42 : None, + 43 : None, + 44 : None, + 45 : None, + 46 : None, + 47 : None, + 48 : None, + 49 : 15, + 50 : 14, + 51 : 17, + 52 : 16 + } + _port_to_eeprom_mapping = {} + _sfp_port = range(49, PORT_END + 1) + + @property + def port_start(self): + return self.PORT_START + + @property + def port_end(self): + return self.PORT_END + + @property + def qsfp_ports(self): + return [] + + @property + def port_to_eeprom_mapping(self): + return self._port_to_eeprom_mapping + + def __init__(self): + # Override port_to_eeprom_mapping for class initialization + eeprom_path = '/sys/bus/i2c/devices/i2c-{0}/{0}-0050/eeprom' + for x in range(self.PORT_START, self.PORT_END + 1): + port_eeprom_path = eeprom_path.format(self.port_to_i2c_mapping[x]) + self.port_to_eeprom_mapping[x] = port_eeprom_path + SfpUtilBase.__init__(self) + + def get_presence(self, port_num): + sfp_modabs_path = '/sys/devices/platform/e1031.smc/SFP/SFP{0}/sfp_modabs' + + if port_num not in self._sfp_port: + return False + + status = 1 + try: + with open(sfp_modabs_path.format(port_num - 48), 'r') as port_status: + status = int(port_status.read()) + except IOError: + return False + + return status == 0 + + + def get_low_power_mode(self, port_num): + raise NotImplementedError + + def set_low_power_mode(self, port_num, lpmode): + raise NotImplementedError + + def reset(self, port_num): + raise NotImplementedError + + def get_transceiver_change_event(self): + raise NotImplementedError diff --git a/device/celestica/x86_64-cel_e1031-r0/sensors.conf b/device/celestica/x86_64-cel_e1031-r0/sensors.conf index 1874548cff64..25c6047137b6 100644 --- a/device/celestica/x86_64-cel_e1031-r0/sensors.conf +++ b/device/celestica/x86_64-cel_e1031-r0/sensors.conf @@ -1,12 +1,33 @@ -# libsensors configuration file for Celestica DX010. +# libsensors configuration file for Celestica E1031. # The i2c bus portion is omit because adapter name # changes every time when system boot up. -chip "max6697-i2c-*-1a" - label temp1 "temp sensor 1" - label temp2 "temp sensor 2" - label temp3 "temp sensor 3" - label temp4 "temp sensor 4" - label temp5 "temp sensor 5" - ignore temp6 - ignore temp7 +bus "i2c-3" "i2c-0-mux (chan_id 1)" +bus "i2c-11" "i2c-8-mux (chan_id 1)" + +chip "max6697-i2c-3-1a" + label temp1 "CPU board temperature sensor : 1" + label temp2 "CPU board temperature sensor : 2" + label temp3 "CPU board temperature sensor : 3" + ignore temp4 + ignore temp5 + ignore temp6 + ignore temp7 + +chip "max6697-i2c-11-1a" + label temp1 "Main board temperature sensor : 1" + label temp2 "Main board temperature sensor : 2" + label temp3 "Main board temperature sensor : 3" + label temp4 "Main board temperature sensor : 4" + label temp5 "Main board temperature sensor : 5" + ignore temp6 + ignore temp7 + + +chip "emc2305-i2c-*-4d" + ignore fan3 + ignore fan5 + label fan4 "Fan 1 :" + label fan2 "Fan 2 :" + label fan1 "Fan 3 :" + diff --git a/platform/broadcom/platform-modules-cel.mk b/platform/broadcom/platform-modules-cel.mk index 9226d9246308..1224faaa6750 100644 --- a/platform/broadcom/platform-modules-cel.mk +++ b/platform/broadcom/platform-modules-cel.mk @@ -1,7 +1,7 @@ # Celestica DX010 and Haliburton Platform modules -CEL_DX010_PLATFORM_MODULE_VERSION = 0.8 -CEL_HALIBURTON_PLATFORM_MODULE_VERSION = 0.8 +CEL_DX010_PLATFORM_MODULE_VERSION = 0.9 +CEL_HALIBURTON_PLATFORM_MODULE_VERSION = 0.9 export CEL_DX010_PLATFORM_MODULE_VERSION export CEL_HALIBURTON_PLATFORM_MODULE_VERSION diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/changelog b/platform/broadcom/sonic-platform-modules-cel/debian/changelog index 64f2decf2677..843b028e4301 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/changelog +++ b/platform/broadcom/sonic-platform-modules-cel/debian/changelog @@ -1,8 +1,15 @@ +sonic-cel-platform-modules (0.9) unstable; urgency=low + + * Add haliburton platform module. + + -- Wirut Getbamrung Fri, 17 Aug 2018 10:10:10 +0700 + sonic-cel-platform-modules (0.8) unstable; urgency=low - * Add haliburton platform + * Add dx010 platform fan led control. + * The platform gpio init moved to kernel space. - -- Supakit Fuangkaew Thu, 5 Apr 2018 09:09:09 +0700 + -- Pradchaya Phucharoen Mon, 1 Jul 2018 11:09:13 +0700 sonic-cel-platform-modules (0.7) unstable; urgency=low diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init index 08770d1d64f6..66f1ee5529c2 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.init @@ -15,10 +15,8 @@ case "$1" in start) echo -n "Setting up board... " - depmod -a - modprobe i2c-dev - modprobe i2c-mux-pca954x - + modprobe smc + found=0 for devnum in 0 1; do devname=`cat /sys/bus/i2c/devices/i2c-${devnum}/name` @@ -56,15 +54,11 @@ start) # Attach fans echo emc2305 0x4d > /sys/bus/i2c/devices/i2c-23/new_device - # Attach PSUs - echo dps200 0x5a > /sys/bus/i2c/devices/i2c-12/new_device - echo dps200 0x5b > /sys/bus/i2c/devices/i2c-13/new_device - - # Attach 4 SFP+ Uplink - echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-14/new_device - echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-15/new_device - echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-16/new_device - echo optoe1 0x50 > /sys/bus/i2c/devices/i2c-17/new_device + # Attach 4 SFP+ Uplink + echo optoe2 0x50 > /sys/bus/i2c/devices/i2c-14/new_device + echo optoe2 0x50 > /sys/bus/i2c/devices/i2c-15/new_device + echo optoe2 0x50 > /sys/bus/i2c/devices/i2c-16/new_device + echo optoe2 0x50 > /sys/bus/i2c/devices/i2c-17/new_device echo "done." ;; diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.install b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.install index 464b77855f95..93b2eed633d1 100644 --- a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.install +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.install @@ -1 +1,2 @@ haliburton/cfg/haliburton-modules.conf etc/modules-load.d +haliburton/systemd/platform-modules-haliburton.service lib/systemd/system diff --git a/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.postinst b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.postinst new file mode 100644 index 000000000000..bdc23c66d5a4 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/debian/platform-modules-haliburton.postinst @@ -0,0 +1,3 @@ +depmod -a +systemctl enable platform-modules-haliburton.service +systemctl start platform-modules-haliburton.service diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile index 6d0c489154c2..58e2b0bf2d7a 100644 --- a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/Makefile @@ -1 +1 @@ -obj-m := mc24lc64t.o emc2305.o +obj-m := mc24lc64t.o emc2305.o smc.o diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/smc.c b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/smc.c new file mode 100644 index 000000000000..82abc9e8ea1f --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/modules/smc.c @@ -0,0 +1,777 @@ +/* + * smc.c - The CPLD driver for E1031 System Management. + * The driver implement sysfs to access CPLD register on the E1031 via LPC bus. + * Copyright (C) 2018 Celestica Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define DRIVER_NAME "e1031.smc" + +/** + * CPLD register address for read and write. + */ +#define VERSION 0x0200 +#define SCRATCH 0x0201 +#define BROAD_ID 0x0202 + +/* SEPERATE RESET + * [7:5] RESERVED + * [4] RESET PCIE + * [3] RESET USBHUB + * [2] RESET B50282 + * [1] RESET PCA9548 + * [0] RESET BCM54616 + * 1: not reset, 0: reset + */ +#define SPR_RESET 0x0222 + +/* PSU STATUS + * [7] PSUR_ACOK + * [6] PSUR_PWOK + * [5] PSUR_ALRT + * [4] PSUR_PRS + * [3] PSUL_ACOK + * [2] PSUL_PWOK + * [1] PSUL_ALRT + * [0] PSUL_PRS + */ +#define PSU_STAT 0x0204 +#define PSUR_ACOK 7 +#define PSUR_PWOK 6 +#define PSUR_ALRT 5 +#define PSUR_PRS 4 +#define PSUL_ACOK 3 +#define PSUL_PWOK 2 +#define PSUL_ALRT 1 +#define PSUL_PRS 0 + +/* FAN LED CTRL + * [7:3] RESERVED + * [2:0] LED CTRL + */ +#define FAN_LED_1 0x0205 +#define FAN_LED_2 0x0206 +#define FAN_LED_3 0x0207 + +enum FAN_LED { + fan_led_grn = 0, + fan_led_grn_bnk, + fan_led_amb, + fan_led_amb_bnk, + fan_led_off +} fan_led; + +#define LED_OPMOD 0x0208 +#define LED_TEST 0x0209 + +/* SYSTEM LED + * [7:4] RESERVED + * [3:2] STATUS LED + * [1:0] MASTER LED + */ +#define LED_FPS 0x020a + +enum STAT_LED { + stat_led_off = 0, + stat_led_grn, + stat_led_grn_bnk +} stat_led; + +enum MASTER_LED { + master_led_off = 0, + master_led_grn, + master_led_amb +} master_led; + +/* FAN DIRECTION STAT + * [7:4] RESERVED + * [3] USB HUB STAT + * [2:0] FAN_DIR + */ +#define DEV_STAT 0x020c +#define FAN_3 2 +#define FAN_2 1 +#define FAN_1 0 + +/* SFP PORT STATUS + * [7:4] RESERVED + * [3:0] TX_FAULT / MODABS / RXLOS + */ +#define SFP_TXFAULT 0x0242 +#define SFP_MODABS 0x0243 +#define SFP_RXLOS 0x0244 + +/* SFP PORT CTRL + * [7:4] RATE SEL (RS0/RS1) + * [3:0] TX_DIS + */ +#define SFP_TXCTRL 0x0255 + +struct cpld_data { + struct mutex cpld_lock; + uint16_t read_addr; + struct device *fpp_node; + struct device *sfp_devices[4]; +}; + +struct sfp_device_data { + int portid; +}; + +struct class *celplatform; +struct cpld_data *cpld_data; + +struct index_device_attribute { + struct device_attribute dev_attr; + int index; +}; + +static ssize_t scratch_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned char data = 0; + mutex_lock(&cpld_data->cpld_lock); + data = inb(SCRATCH); + mutex_unlock(&cpld_data->cpld_lock); + return sprintf(buf, "0x%2.2x\n", data); +} + +static ssize_t scratch_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned long data; + char *last; + + mutex_lock(&cpld_data->cpld_lock); + data = (uint16_t)strtoul(buf, &last, 16); + if (data == 0 && buf == last) { + mutex_unlock(&cpld_data->cpld_lock); + return -EINVAL; + } + outb(data, SCRATCH); + mutex_unlock(&cpld_data->cpld_lock); + return count; +} + + +static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + int len = 0; + mutex_lock(&cpld_data->cpld_lock); + len = sprintf(buf, "0x%2.2x\n", inb(VERSION)); + mutex_unlock(&cpld_data->cpld_lock); + return len; +} + +static ssize_t getreg_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + uint16_t addr; + char *last; + + addr = (uint16_t)strtoul(buf, &last, 16); + if (addr == 0 && buf == last) { + return -EINVAL; + } + cpld_data->read_addr = addr; + return count; +} + +static ssize_t getreg_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + int len = 0; + mutex_lock(&cpld_data->cpld_lock); + len = sprintf(buf, "0x%2.2x\n", inb(cpld_data->read_addr)); + mutex_unlock(&cpld_data->cpld_lock); + return len; +} + +static ssize_t setreg_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + uint16_t addr; + uint8_t value; + char *tok; + char clone[count]; + char *pclone = clone; + char *last; + + strcpy(clone, buf); + + mutex_lock(&cpld_data->cpld_lock); + tok = strsep((char**)&pclone, " "); + if (tok == NULL) { + mutex_unlock(&cpld_data->cpld_lock); + return -EINVAL; + } + addr = (uint16_t)strtoul(tok, &last, 16); + if (addr == 0 && tok == last) { + mutex_unlock(&cpld_data->cpld_lock); + return -EINVAL; + } + + tok = strsep((char**)&pclone, " "); + if (tok == NULL) { + mutex_unlock(&cpld_data->cpld_lock); + return -EINVAL; + } + value = (uint8_t)strtoul(tok, &last, 16); + if (value == 0 && tok == last) { + mutex_unlock(&cpld_data->cpld_lock); + return -EINVAL; + } + + outb(value, addr); + mutex_unlock(&cpld_data->cpld_lock); + return count; +} + +/** + * Show status led + * @param dev kernel device + * @param devattr kernel device attribute + * @param buf buffer for get value + * @return led state - off/on/blink + */ +static ssize_t status_led_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned char data = 0; + mutex_lock(&cpld_data->cpld_lock); + data = inb(LED_FPS); + mutex_unlock(&cpld_data->cpld_lock); + data = data & 0xc; + return sprintf(buf, "%s\n", + data == stat_led_grn ? "on" : data == stat_led_grn_bnk ? "blink" : "off"); +} + +/** + * Set the status led + * @param dev kernel device + * @param devattr kernel device attribute + * @param buf buffer of set value - off/on/blink + * @param count number of bytes in buffer + * @return number of bytes written, or error code < 0. + */ +static ssize_t status_led_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned char led_status, data; + + if (sysfs_streq(buf, "off")) { + led_status = stat_led_off; + } else if (sysfs_streq(buf, "on")) { + led_status = stat_led_grn; + } else if (sysfs_streq(buf, "blink")) { + led_status = stat_led_grn_bnk; + } else { + count = -EINVAL; + return count; + } + mutex_lock(&cpld_data->cpld_lock); + data = inb(LED_FPS); + data = data & ~(0xc); + data = data | ( led_status << 2 ); + outb(data, LED_FPS); + mutex_unlock(&cpld_data->cpld_lock); + return count; +} + +/** + * Show master led + * @param dev kernel device + * @param devattr kernel device attribute + * @param buf buffer for get value + * @return led state - off/green/amber + */ +static ssize_t master_led_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned char data = 0; + mutex_lock(&cpld_data->cpld_lock); + data = inb(LED_FPS); + mutex_unlock(&cpld_data->cpld_lock); + data = data & 0x3; + return sprintf(buf, "%s\n", + data == master_led_grn ? "on" : data == master_led_amb ? "amber" : "off"); +} + +/** + * Set the master led + * @param dev kernel device + * @param devattr kernel device attribute + * @param buf buffer of set value - off/green/amber + * @param count number of bytes in buffer + * @return number of bytes written, or error code < 0. + */ +static ssize_t master_led_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + unsigned char led_status, data; + + if (sysfs_streq(buf, "off")) { + led_status = master_led_off; + } else if (sysfs_streq(buf, "green")) { + led_status = master_led_grn; + } else if (sysfs_streq(buf, "amber")) { + led_status = master_led_amb; + } else { + count = -EINVAL; + return count; + } + mutex_lock(&cpld_data->cpld_lock); + data = inb(LED_FPS); + data = data & ~(0x3); + data = data | led_status; + outb(data, LED_FPS); + mutex_unlock(&cpld_data->cpld_lock); + return count; +} + +static ssize_t psuL_prs_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned char data = 0; + mutex_lock(&cpld_data->cpld_lock); + data = inb(PSU_STAT); + mutex_unlock(&cpld_data->cpld_lock); + return sprintf(buf, "%d\n", ~(data >> PSUL_PRS) & 1U); +} + +static ssize_t psuR_prs_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned char data = 0; + mutex_lock(&cpld_data->cpld_lock); + data = inb(PSU_STAT); + mutex_unlock(&cpld_data->cpld_lock); + return sprintf(buf, "%d\n", ~(data >> PSUR_PRS) & 1U); +} +static DEVICE_ATTR_RO(psuR_prs); + +static ssize_t psuL_status_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned char data = 0; + mutex_lock(&cpld_data->cpld_lock); + data = inb(PSU_STAT); + mutex_unlock(&cpld_data->cpld_lock); + data = ( data >> PSUL_PWOK ) & 0x3; + return sprintf(buf, "%d\n", data == 0x3 ); +} + +static ssize_t psuR_status_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + unsigned char data = 0; + mutex_lock(&cpld_data->cpld_lock); + data = inb(PSU_STAT); + mutex_unlock(&cpld_data->cpld_lock); + data = ( data >> PSUR_PWOK ) & 0x3; + return sprintf(buf, "%d\n", data == 0x3 ); +} + + +static ssize_t fan_dir_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *sa = to_sensor_dev_attr(devattr); + int index = sa->index; + unsigned char data = 0; + + // Use index to determind the status bit + mutex_lock(&cpld_data->cpld_lock); + data = inb(DEV_STAT); + mutex_unlock(&cpld_data->cpld_lock); + data = ( data >> index ) & 1U; + return sprintf(buf, "%s\n", data ? "B2F" : "F2B" ); +} + +static ssize_t sfp_txfault_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + unsigned char data; + struct sfp_device_data *dev_data = dev_get_drvdata(dev); + unsigned int port_bit = dev_data->portid - 1; + + mutex_lock(&cpld_data->cpld_lock); + data = inb(SFP_TXFAULT); + mutex_unlock(&cpld_data->cpld_lock); + return sprintf(buf, "%d\n", (data >> port_bit ) & 1U); +} + +static ssize_t sfp_modabs_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + unsigned char data; + struct sfp_device_data *dev_data = dev_get_drvdata(dev); + unsigned int port_bit = dev_data->portid - 1; + + mutex_lock(&cpld_data->cpld_lock); + data = inb(SFP_MODABS); + mutex_unlock(&cpld_data->cpld_lock); + return sprintf(buf, "%d\n", (data >> port_bit ) & 1U); +} + +static ssize_t sfp_rxlos_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + unsigned char data; + struct sfp_device_data *dev_data = dev_get_drvdata(dev); + unsigned int port_bit = dev_data->portid - 1; + + mutex_lock(&cpld_data->cpld_lock); + data = inb(SFP_RXLOS); + mutex_unlock(&cpld_data->cpld_lock); + return sprintf(buf, "%d\n", (data >> port_bit ) & 1U); +} + +static ssize_t sfp_txdis_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + unsigned char data; + struct sfp_device_data *dev_data = dev_get_drvdata(dev); + unsigned int port_bit = dev_data->portid - 1; + mutex_lock(&cpld_data->cpld_lock); + data = inb(SFP_TXCTRL); + mutex_unlock(&cpld_data->cpld_lock); + return sprintf(buf, "%d\n", (data >> port_bit ) & 1U); +} + +static ssize_t sfp_txdis_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) +{ + long value; + ssize_t status; + unsigned char data; + struct sfp_device_data *dev_data = dev_get_drvdata(dev); + unsigned int port_bit = dev_data->portid - 1; + + mutex_lock(&cpld_data->cpld_lock); + status = kstrtol(buf, 0, &value); + if (status == 0) { + // check if value is 0, clear + data = inb(SFP_TXCTRL); + if (!value) + data = data & ~( 1U << port_bit); + else + data = data | ( 1U << port_bit); + outb(data, SFP_TXCTRL); + status = size; + } + mutex_unlock(&cpld_data->cpld_lock); + return status; +} + +static ssize_t sfp_rs_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + unsigned char data; + struct sfp_device_data *dev_data = dev_get_drvdata(dev); + unsigned int port_bit = dev_data->portid - 1; + + // High nibble + port_bit = port_bit + 4; + mutex_lock(&cpld_data->cpld_lock); + data = inb(SFP_TXCTRL); + mutex_unlock(&cpld_data->cpld_lock); + return sprintf(buf, "%d\n", (data >> port_bit ) & 1U); +} + +static ssize_t sfp_rs_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size) +{ + long value; + ssize_t status; + unsigned char data; + struct sfp_device_data *dev_data = dev_get_drvdata(dev); + unsigned int port_bit = dev_data->portid - 1; + + // High nibble + port_bit = port_bit + 4; + mutex_lock(&cpld_data->cpld_lock); + status = kstrtol(buf, 0, &value); + if (status == 0) { + // check if value is 0, clear + data = inb(SFP_TXCTRL); + if (!value) + data = data & ~( 1U << port_bit); + else + data = data | ( 1U << port_bit); + outb(data, SFP_TXCTRL); + status = size; + } + mutex_unlock(&cpld_data->cpld_lock); + return status; +} + +static ssize_t fan_led_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *sa = to_sensor_dev_attr(devattr); + int index = sa->index; + unsigned char data = 0; + char *led_str[5] = {"green", "green-blink", "amber", "amber-blink", "off"}; + + // Use index to determind the status bit + mutex_lock(&cpld_data->cpld_lock); + data = inb(FAN_LED_1 + index); + data = data & 0x7; + mutex_unlock(&cpld_data->cpld_lock); + return sprintf(buf, "%s\n", led_str[data]); +} + +static ssize_t fan_led_store(struct device *dev, struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *sa = to_sensor_dev_attr(devattr); + int index = sa->index; + unsigned char led_status = 0; + + if (sysfs_streq(buf, "off")) { + led_status = fan_led_off; + } else if (sysfs_streq(buf, "green")) { + led_status = fan_led_grn; + } else if (sysfs_streq(buf, "amber")) { + led_status = fan_led_amb; + } else if (sysfs_streq(buf, "green-blink")) { + led_status = fan_led_grn_bnk; + } else if (sysfs_streq(buf, "amber-blink")) { + led_status = fan_led_amb_bnk; + } else { + count = -EINVAL; + return count; + } + mutex_lock(&cpld_data->cpld_lock); + outb(led_status, FAN_LED_1 + index); + mutex_unlock(&cpld_data->cpld_lock); + return count; +} + +static DEVICE_ATTR_RO(version); +static DEVICE_ATTR_RW(scratch); +static DEVICE_ATTR_RW(getreg); +static DEVICE_ATTR_WO(setreg); +static DEVICE_ATTR_RW(status_led); +static DEVICE_ATTR_RW(master_led); +static DEVICE_ATTR_RO(psuL_prs); +static DEVICE_ATTR_RO(psuL_status); +static DEVICE_ATTR_RO(psuR_status); +static DEVICE_ATTR_RO(sfp_txfault); +static DEVICE_ATTR_RO(sfp_modabs); +static DEVICE_ATTR_RO(sfp_rxlos); +static DEVICE_ATTR_RW(sfp_txdis); +static DEVICE_ATTR_RW(sfp_rs); +static SENSOR_DEVICE_ATTR(fan1_dir, S_IRUGO, fan_dir_show, NULL, FAN_1); +static SENSOR_DEVICE_ATTR(fan2_dir, S_IRUGO, fan_dir_show, NULL, FAN_2); +static SENSOR_DEVICE_ATTR(fan3_dir, S_IRUGO, fan_dir_show, NULL, FAN_3); +static SENSOR_DEVICE_ATTR(fan1_led, S_IWUSR | S_IRUGO, fan_led_show, fan_led_store, FAN_1); +static SENSOR_DEVICE_ATTR(fan2_led, S_IWUSR | S_IRUGO, fan_led_show, fan_led_store, FAN_2); +static SENSOR_DEVICE_ATTR(fan3_led, S_IWUSR | S_IRUGO, fan_led_show, fan_led_store, FAN_3); + +static struct attribute *cpld_attrs[] = { + &dev_attr_version.attr, + &dev_attr_scratch.attr, + &dev_attr_getreg.attr, + &dev_attr_setreg.attr, + // LEDs + &dev_attr_status_led.attr, + &dev_attr_master_led.attr, + // PSUs + &dev_attr_psuL_prs.attr, + &dev_attr_psuR_prs.attr, + &dev_attr_psuL_status.attr, + &dev_attr_psuR_status.attr, + // FANs + &sensor_dev_attr_fan1_dir.dev_attr.attr, + &sensor_dev_attr_fan2_dir.dev_attr.attr, + &sensor_dev_attr_fan3_dir.dev_attr.attr, + &sensor_dev_attr_fan1_led.dev_attr.attr, + &sensor_dev_attr_fan2_led.dev_attr.attr, + &sensor_dev_attr_fan3_led.dev_attr.attr, + NULL, +}; + +static struct attribute_group cpld_group = { + .attrs = cpld_attrs, +}; + +static struct attribute *sfp_attrs[] = { + // SFP + &dev_attr_sfp_txfault.attr, + &dev_attr_sfp_modabs.attr, + &dev_attr_sfp_rxlos.attr, + &dev_attr_sfp_txdis.attr, + &dev_attr_sfp_rs.attr, + NULL, +}; + +ATTRIBUTE_GROUPS(sfp); + +static struct resource cpld_resources[] = { + { + .start = 0x0200, + .end = 0x0255, + .flags = IORESOURCE_IO, + }, +}; + +static struct device * sfp_init(int portid) { + struct sfp_device_data *new_data; + struct device *new_device; + + new_data = kzalloc(sizeof(*new_data), GFP_KERNEL); + if (!new_data) { + printk(KERN_ALERT "Cannot alloc sff device data @port%d", portid); + return NULL; + } + /* Front panel port ID start from 1 */ + new_data->portid = portid + 1; + new_device = device_create_with_groups(celplatform, cpld_data->fpp_node, MKDEV(0, 0), new_data, sfp_groups, "SFP%d", new_data->portid); + if (IS_ERR(new_device)) { + printk(KERN_ALERT "Cannot create sff device @port%d", portid); + kfree(new_data); + return NULL; + } + return new_device; +} + +static void cpld_dev_release( struct device * dev) +{ + return; +} + +static struct platform_device cpld_dev = { + .name = DRIVER_NAME, + .id = -1, + .num_resources = ARRAY_SIZE(cpld_resources), + .resource = cpld_resources, + .dev = { + .release = cpld_dev_release, + } +}; + +static int cpld_drv_probe(struct platform_device *pdev) +{ + struct resource *res; + int err, i = 0; + + cpld_data = devm_kzalloc(&pdev->dev, sizeof(struct cpld_data), + GFP_KERNEL); + if (!cpld_data) + return -ENOMEM; + + mutex_init(&cpld_data->cpld_lock); + + cpld_data->read_addr = VERSION; + + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (unlikely(!res)) { + printk(KERN_ERR "Specified Resource Not Available...\n"); + return -ENODEV; + } + + err = sysfs_create_group(&pdev->dev.kobj, &cpld_group); + if (err) { + printk(KERN_ERR "Cannot create sysfs for SMC.\n"); + return err; + } + + celplatform = class_create(THIS_MODULE, "celplatform"); + if (IS_ERR(celplatform)) { + printk(KERN_ERR "Failed to register device class\n"); + sysfs_remove_group(&pdev->dev.kobj, &cpld_group); + return PTR_ERR(celplatform); + } + + cpld_data->fpp_node = device_create(celplatform, NULL, MKDEV(0, 0), NULL, "optical_ports"); + if (IS_ERR(cpld_data->fpp_node)) { + class_destroy(celplatform); + sysfs_remove_group(&pdev->dev.kobj, &cpld_group); + return PTR_ERR(cpld_data->fpp_node); + } + + err = sysfs_create_link(&pdev->dev.kobj, &cpld_data->fpp_node->kobj, "SFP"); + if (err != 0) { + put_device(cpld_data->fpp_node); + device_unregister(cpld_data->fpp_node); + class_destroy(celplatform); + sysfs_remove_group(&pdev->dev.kobj, &cpld_group); + return err; + } + + // Creae SFP devices + for ( i = 0; i < 4; i++) { + cpld_data->sfp_devices[i] = sfp_init(i); + } + + // Clear all reset signals + outb(0xFF, SPR_RESET); + return 0; +} + +static int cpld_drv_remove(struct platform_device *pdev) +{ + struct sfp_device_data *rem_data; + int i; + + for ( i = 0; i < 4; i++ ) { + rem_data = dev_get_drvdata(cpld_data->sfp_devices[i]); + put_device(cpld_data->sfp_devices[i]); + device_unregister(cpld_data->sfp_devices[i]); + kzfree(rem_data); + } + put_device(cpld_data->fpp_node); + device_unregister(cpld_data->fpp_node); + sysfs_remove_group(&pdev->dev.kobj, &cpld_group); + class_destroy(celplatform); + return 0; +} + +static struct platform_driver cpld_drv = { + .probe = cpld_drv_probe, + .remove = __exit_p(cpld_drv_remove), + .driver = { + .name = DRIVER_NAME, + }, +}; + +int cpld_init(void) +{ + // Register platform device and platform driver + platform_device_register(&cpld_dev); + platform_driver_register(&cpld_drv); + return 0; +} + +void cpld_exit(void) +{ + // Unregister platform device and platform driver + platform_driver_unregister(&cpld_drv); + platform_device_unregister(&cpld_dev); +} + +module_init(cpld_init); +module_exit(cpld_exit); + + +MODULE_AUTHOR("Celestica Inc."); +MODULE_DESCRIPTION("Celestica E1031 SMC driver"); +MODULE_VERSION("0.0.3"); +MODULE_LICENSE("GPL"); diff --git a/platform/broadcom/sonic-platform-modules-cel/haliburton/systemd/platform-modules-haliburton.service b/platform/broadcom/sonic-platform-modules-cel/haliburton/systemd/platform-modules-haliburton.service new file mode 100644 index 000000000000..bf1295038856 --- /dev/null +++ b/platform/broadcom/sonic-platform-modules-cel/haliburton/systemd/platform-modules-haliburton.service @@ -0,0 +1,14 @@ + +[Unit] +Description=Celestica haliburton platform modules +After=local-fs.target +Before=pmon.service + +[Service] +Type=oneshot +ExecStart=-/etc/init.d/platform-modules-haliburton start +ExecStop=-/etc/init.d/platform-modules-haliburton stop +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target \ No newline at end of file From ad5b14cd3c314f76ac577ad4a27ae590a6aea15f Mon Sep 17 00:00:00 2001 From: Shuotian Cheng Date: Thu, 23 Aug 2018 19:11:53 -0700 Subject: [PATCH 180/180] [vs]: Add pip install six (#1978) sonic-utilities requires six Signed-off-by: Shu0T1an ChenG --- platform/vs/docker-sonic-vs/Dockerfile.j2 | 1 + 1 file changed, 1 insertion(+) diff --git a/platform/vs/docker-sonic-vs/Dockerfile.j2 b/platform/vs/docker-sonic-vs/Dockerfile.j2 index ded75caff524..a7cccfd60a3b 100644 --- a/platform/vs/docker-sonic-vs/Dockerfile.j2 +++ b/platform/vs/docker-sonic-vs/Dockerfile.j2 @@ -46,6 +46,7 @@ RUN apt-get install -y net-tools \ RUN pip install setuptools RUN pip install py2_ipaddress +RUN pip install six {% if docker_sonic_vs_debs.strip() -%} # Copy locally-built Debian package dependencies