Skip to content

Latest commit

 

History

History
974 lines (759 loc) · 43.8 KB

collaborator-guide.md

File metadata and controls

974 lines (759 loc) · 43.8 KB
Raw

Node.js collaborator guide

Contents

This document explains how collaborators manage the Node.js project. Collaborators should understand the guidelines for new contributors and the project governance model.

Issues and pull requests

Mind these guidelines, the opinions of other collaborators, and guidance of the TSC. Notify other qualified parties for more input on an issue or a pull request. See Who to CC in the issue tracker.

Welcoming first-time contributors

Always show courtesy to individuals submitting issues and pull requests. Be welcoming to first-time contributors, identified by the GitHub First-time contributor badge.

For first-time contributors, check if the commit author is the same as the pull request author. This way, once their pull request lands, GitHub will show them as a Contributor. Ask if they have configured their git username and email to their liking.

Closing issues and pull requests

Collaborators can close any issue or pull request that is not relevant to the future of the Node.js project. Where this is unclear, leave the issue or pull request open for several days to allow for discussion. Where this does not yield evidence that the issue or pull request has relevance, close it. Remember that issues and pull requests can always be re-opened if necessary.

Author ready pull requests

A pull request is author ready when:

  • There is a CI run in progress or completed.
  • There is at least one collaborator approval.
  • There are no outstanding review comments.

Please always add the author ready label to the pull request in that case. Please always remove it again as soon as the conditions are not met anymore.

Handling own pull requests

When you open a pull request, start a CI right away. Later, after new code changes or rebasing, start a new CI.

As soon as the pull request is ready to land, please do so. This allows other collaborators to focus on other pull requests. If your pull request is not ready to land but is author ready, add the author ready label. If you wish to land the pull request yourself, use the "assign yourself" link to self-assign it.

Managing security issues

Use the process outlined in SECURITY.md to report security issues. If a user opens a security issue in the public repository:

  • Ask the user to submit a report through HackerOne as outlined in SECURITY.md.
  • Move the issue to the private repository called premature-disclosures.
  • For any related pull requests, create an associated issue in the premature-disclosures repository. Add a copy of the patch for the pull request to the issue. Add screenshots of discussion from the pull request to the issue.
  • Open a ticket with GitHub to delete the pull request using Node.js (team) as the account organization.
  • Open a new issue in the public repository with the title FYI - pull request deleted #YYYY. Include an explanation for the user:

    FYI @xxxx we asked GitHub to delete your pull request while we work on releases in private.

  • Email [email protected] with links to the issues in the premature-disclosures repository.

Accepting modifications

Contributors propose modifications to Node.js using GitHub pull requests. This includes modifications proposed by TSC members and other collaborators. A pull request must pass code review and CI before landing into the codebase.

Code reviews

At least two collaborators must approve a pull request before the pull request lands. One collaborator approval is enough if the pull request has been open for more than seven days.

Approving a pull request indicates that the collaborator accepts responsibility for the change.

Approval must be from collaborators who are not authors of the change.

In some cases, it might be necessary to summon a GitHub team to a pull request for review by @-mention. See Who to CC in the issue tracker.

If you are the first collaborator to approve a pull request that has no CI yet, please start one. Please also start a new CI if the pull request creator pushed new code since the last CI run.

Consensus seeking

A pull request can land if it has the needed approvals, CI, wait time and no outstanding objections. Breaking changes must receive TSC review in addition to other requirements. If a pull request meets all requirements except the wait time, please add the author ready label.

Objections

Collaborators can object to a pull request by using the "Request Changes" GitHub feature. Dissent comments alone don't constitute an objection. Any pull request objection must include a clear reason for that objection, and the objector must remain responsive for further discussion towards consensus about the direction of the pull request. Where possible, provide a set of actionable steps alongside the objection.

If the objection is not clear to others, another collaborator can ask an objecting collaborator to explain their objection or to provide actionable steps to resolve the objection. If the objector is unresponsive for seven days after a collaborator asks for clarification, a collaborator may dismiss the objection.

Pull requests with outstanding objections must remain open until all objections are satisfied. If reaching consensus is not possible, a collaborator can escalate the issue to the TSC by pinging @nodejs/tsc and adding the tsc-agenda label to the issue.

Helpful resources

Waiting for approvals

Before landing pull requests, allow 48 hours for input from other collaborators. Certain types of pull requests can be fast-tracked and can land after a shorter delay. For example:

  • Focused changes that affect only documentation and/or the test suite:
    • code-and-learn tasks often fall into this category.
    • good-first-issue pull requests might also be suitable.
  • Changes that fix regressions:
    • Regressions that break the workflow (red CI or broken compilation).
    • Regressions that happen right before a release, or reported soon after.

To propose fast-tracking a pull request, apply the fast-track label. Then a GitHub Actions workflow will add a comment that collaborators can upvote.

If someone disagrees with the fast-tracking request, remove the label. Do not fast-track the pull request in that case.

The pull request can be fast-tracked if two collaborators approve the fast-tracking request. To land, the pull request itself still needs two collaborator approvals and a passing CI.

Collaborators can request fast-tracking of pull requests they did not author. In that case only, the request itself is also one fast-track approval. Upvote the comment anyway to avoid any doubt.

Testing and CI

All fixes must have a test case which demonstrates the defect. The test should fail before the change, and pass after the change.

Do not land any pull requests without the necessary passing CI runs. A passing (green) GitHub Actions CI result is required. A passing (green or yellow) Jenkins CI is also required if the pull request contains changes that will affect the node binary. This is because GitHub Actions CI does not cover all the environments supported by Node.js.

Changes that affect the `node` binary

Changes in the following folders (except comment-only changes) are guaranteed to affect the node binary:

  • deps/
  • lib/
  • src/
  • test/
  • tools/code_cache/
  • tools/gyp/
  • tools/icu/
  • tools/inspector-protocol/
  • tools/msvs/
  • tools/snapshot/
  • tools/v8_gypfiles/

There are some other files that touch the build chain. Changes in the following files also qualify as affecting the node binary:

  • tools/*.py
  • tools/build-addons.mjs
  • *.gyp
  • *.gypi
  • configure
  • configure.py
  • Makefile
  • vcbuild.bat

If there are GitHub Actions CI failures unrelated to the change in the pull request, try the "🔄 Re-run all jobs" button, on the right-hand side of the "Checks" tab.

If there are Jenkins CI failures unrelated to the change in the pull request, try "Resume Build". It is in the left navigation of the relevant node-test-pull-request job. It will preserve all the green results from the current job but re-run everything else. Start a fresh CI if more than seven days have elapsed since the original failing CI as the compiled binaries for the Windows and ARM platforms are only kept for seven days.

If new commits are pushed to the pull request branch after the latest Jenkins CI run, a fresh CI run is required. It can be started by pressing "Retry" on the left sidebar, or by adding the request-ci label to the pull request.

Useful Jenkins CI jobs

  • node-test-pull-request is the CI job to test pull requests. It runs the build-ci and test-ci targets on all supported platforms.

  • citgm-smoker uses CitGM to allow you to run npm install && npm test on a large selection of common modules. This is useful to check whether a change will cause breakage in the ecosystem.

  • node-stress-single-test can run a group of tests over and over on a specific platform. Use it to check that the tests are reliable.

  • node-test-commit-v8-linux runs the standard V8 tests. Run it when updating V8 in Node.js or floating new patches on V8.

  • node-test-commit-custom-suites-freestyle enables customization of test suites and parameters. It can execute test suites not used in other CI test runs (such as tests in the internet or pummel directories). It can also make sure tests pass when provided with a flag not used in other CI test runs (such as --worker).

Starting a Jenkins CI job

From the CI Job page, click "Build with Parameters" on the left side.

You generally need to enter only one or both of the following options in the form:

  • GIT_REMOTE_REF: Change to the remote portion of git refspec. To specify the branch this way, refs/heads/BRANCH is used (e.g. for main -> refs/heads/main). For pull requests, it will look like refs/pull/PR_NUMBER/head (e.g. for pull request #42 -> refs/pull/42/head).
  • REBASE_ONTO: Change that to origin/main so the pull request gets rebased onto main. This can especially be important for pull requests that have been open a while.

Look at the list of jobs on the left hand side under "Build History" and copy the link to the one you started (which will be the one on top, but click through to make sure it says something like "Started 5 seconds ago" (top right) and "Started by user ...".

Copy/paste the URL for the job into a comment in the pull request. node-test-pull-request is an exception where the GitHub bot will automatically post for you.

The node-test-pull-request CI job can be started by adding the request-ci label into the pull request. Once this label is added, github-actions bot will start the node-test-pull-request automatically. If the github-actions bot is unable to start the job, it will update the label with request-ci-failed.

Internal vs. public API

All functionality in the official Node.js documentation is part of the public API. Any undocumented object, property, method, argument, behavior, or event is internal. There are exceptions to this rule. Node.js users have come to rely on some undocumented behaviors. Collaborators treat many of those undocumented behaviors as public.

All undocumented functionality exposed via process.binding(...) is internal.

All undocumented functionality in lib/internal/**/*.js is internal. It is public, though, if it is re-exported by code in lib/*.js.

Non-exported Symbol properties and methods are internal.

Any undocumented object property or method that begins with _ is internal.

Any native C/C++ APIs/ABIs requiring the NODE_WANT_INTERNALS flag are internal.

Sometimes, there is disagreement about whether functionality is internal or public. In those cases, the TSC makes a determination.

For undocumented APIs that are public, open a pull request documenting the API.

Breaking changes

At least two TSC voting members must approve backward-incompatible changes to the main branch.

Examples of breaking changes include:

  • Removal or redefinition of existing API arguments.
  • Changing return values.
  • Removing or modifying existing properties on an options argument.
  • Adding or removing errors.
  • Altering expected timing of an event.
  • Changing the side effects of using a particular API.

Breaking changes and deprecations

Existing stable public APIs that change in a backward-incompatible way must undergo deprecation. The exceptions to this rule are:

  • Adding or removing errors thrown or reported by a public API.
  • Changing error messages for errors without error code.
  • Altering the timing and non-internal side effects of the public API.
  • Changes to errors thrown by dependencies of Node.js, such as V8.
  • One-time exceptions granted by the TSC.

For more information, see Deprecations.

Breaking changes to internal elements

Breaking changes to internal elements can occur in semver-patch or semver-minor commits. Take significant care when making and reviewing such changes. Make an effort to determine the potential impact of the change in the ecosystem. Use Canary in the Goldmine to test such changes. If a change will cause ecosystem breakage, then it is semver-major. Consider providing a Public API in such cases.

Unintended breaking changes

Sometimes, a change intended to be non-breaking turns out to be a breaking change. If such a change lands on the main branch, a collaborator can revert it. As an alternative to reverting, the TSC can apply the semver-major label after-the-fact.

If the change has already been backported to release lines open an issue in the TSC repository to discuss how best to proceed. In the past we have often reverted in the release lines and kept the change on main. The decision to revert or not most often is based on limiting the impact to the ecosystem and how quickly the breaking change is discovered.

If the change is reverted make sure to:

  • consider if additional tests can be added to avoid a similar breaking change being missed in the future.
  • consider if adding packages to CITGM would have helped catch the breaking change.
  • ensure the changelog with the revert clearly explains the situation and it's impact on those who may have already used the updated API.

In either case make sure that the documentation and changelog for the original breaking change are updated to reflect the breaking behavior.

Reverting commits

Revert commits with git revert <HASH> or git revert <FROM>..<TO>. The generated commit message will not have a subsystem and might violate line length rules. That is OK. Append the reason for the revert and any Refs or Fixes metadata. Raise a pull request like any other change.

Introducing new modules

Treat commits that introduce new core modules with extra care.

New modules must only be added with the node: prefix.

When adding promises to an existing API, add /promises (inspector/promises, etc.). Apply the semver-major label to the addition.

If the new module name is free in npm, register a placeholder in the module registry as soon as possible. Link to the pull request that introduces the new core module in the placeholder's README.

If the module name is not free and the module is not widely used, contact the owner to see if they would be willing to transfer it to the project.

We register a placeholder without the node: prefix whenever possible to avoid confusion and typosquatting attacks.

For pull requests introducing new core modules:

  • Allow at least one week for review.
  • Land only after sign-off from at least two TSC voting members.
  • Land with a Stability Index of Experimental. The module must remain Experimental until a semver-major release.

Additions to Node-API

Node-API provides an ABI-stable API guaranteed for future Node.js versions. Node-API additions call for unusual care and scrutiny. If a change adds to node_api.h, js_native_api.h, node_api_types.h, or js_native_api_types.h, consult the relevant guide.

Deprecations

Node.js uses three Deprecation levels. For all deprecated APIs, the API documentation must state the deprecation status.

  • Documentation-Only Deprecation

    • A deprecation notice appears in the API documentation.
    • There are no functional changes.
    • By default, there will be no warnings emitted for such deprecations at runtime.
    • Might cause a runtime warning with the --pending-deprecation flag or NODE_PENDING_DEPRECATION environment variable.

  • Runtime Deprecation

    • Emits a warning at runtime on first use of the deprecated API.
    • If used with the --throw-deprecation flag, will throw a runtime error.

  • End-of-Life

    • The API is no longer subject to the semantic versioning rules.
    • Backward-incompatible changes including complete removal of such APIs can occur at any time.

Apply the notable-change label to all pull requests that introduce Documentation-Only Deprecations. Such deprecations have no impact on code execution. Thus, they are not breaking changes (semver-major).

Runtime Deprecations and End-of-Life APIs (internal or public) are breaking changes (semver-major). The TSC can make exceptions, deciding that one of these deprecations is not a breaking change.

Avoid Runtime Deprecations when an alias or a stub/no-op will suffice. An alias or stub will have lower maintenance costs for end users and Node.js core.

All deprecations receive a unique and immutable identifier. Documentation, warnings, and errors use the identifier when referring to the deprecation. The documentation for the deprecation identifier must always remain in the API documentation. This is true even if the deprecation is no longer in use (for example, due to removal of an End-of-Life deprecated API).

A deprecation cycle is a major release during which an API has been in one of the three Deprecation levels. Documentation-Only Deprecations can land in a minor release. They can not change to a Runtime Deprecation until the next major release.

No API can change to End-of-Life without going through a Runtime Deprecation cycle. There is no rule that deprecated code must progress to End-of-Life. Documentation-Only and Runtime Deprecations can remain in place for an unlimited duration.

Communicate pending deprecations and associated mitigations with the ecosystem as soon as possible. If possible, do it before the pull request adding the deprecation lands on the main branch.

Use the notable-change label on pull requests that add or change the deprecation level of an API.

Involving the TSC

Collaborators can opt to elevate pull requests or issues to the TSC. Do this if a pull request or issue:

  • Is labeled semver-major, or
  • Has a significant impact on the codebase, or
  • Is controversial, or
  • Is at an impasse among collaborators who are participating in the discussion.

@-mention the @nodejs/tsc GitHub team if you want to elevate an issue to the TSC. Do not use the GitHub UI on the right-hand side to assign to @nodejs/tsc or request a review from @nodejs/tsc.

The TSC serves as the final arbiter where required.

Landing pull requests

  1. Avoid landing pull requests that have someone else as an assignee. Authors who wish to land their own pull requests will self-assign them. Sometimes, an author will delegate to someone else. If in doubt, ask the assignee whether it is okay to land.
  2. Never use GitHub's green "Merge pull request" button. Reasons for not using the web interface button:
    • The "Create a merge commit" method will add an unnecessary merge commit.
    • The "Squash and merge" method will add metadata (the pull request #) to the commit title. If more than one author contributes to the pull request, squashing only keeps one author.
    • The "Rebase and merge" method has no way of adding metadata to the commit.
  3. Make sure CI is complete and green. If the CI is not green, check for unreliable tests and infrastructure failures. If there are no corresponding issues in the node or build repositories, open new issues. Run a new CI any time someone pushes new code to the pull request.
  4. Check that the commit message adheres to commit message guidelines.
  5. Add all necessary metadata to commit messages before landing. If you are unsure exactly how to format the commit messages, use the commit log as a reference. See this commit as an example.

For pull requests from first-time contributors, be welcoming. Also, verify that their git settings are to their liking.

If a pull request contains more than one commit, it can be landed either by squashing into one commit or by rebasing all the commits, or a mix of the two. Generally, a collaborator should land a pull request by squashing. If a pull request has more than one self-contained subsystem commits, a collaborator may land it as several commits.

All commits should be self-contained, meaning every commit should pass all tests. This makes it much easier when bisecting to find a breaking change.

Using the commit queue GitHub labels

See the commit queue guide.

Using git-node

In most cases, using the git-node command of @node-core/utils is enough to land a pull request. If you discover a problem when using this tool, please file an issue to the issue tracker.

Quick example:

npm install -g @node-core/utils
git node land $PRID

To use @node-core/utils, you will need a GitHub access token. If you do not have one, @node-core/utils will create one for you the first time you use it. To do this, it will ask for your GitHub password and two-factor authentication code. If you wish to create the token yourself in advance, see the @node-core/utils guide.

Technical HOWTO

Infrequently, it is necessary to manually perform the steps required to land a pull request rather than rely on git-node.

Manual Landing Steps

Clear any am/rebase that might already be underway:

git am --abort
git rebase --abort

Checkout proper target branch:

git checkout main

Update the tree (assumes your repository is set up as detailed in CONTRIBUTING.md):

git fetch upstream
git merge --ff-only upstream/main

Apply external patches:

curl -L https://github.com/nodejs/node/pull/xxx.patch | git am --whitespace=fix

If the merge fails even though recent CI runs were successful, try a 3-way merge:

git am --abort
curl -L https://github.com/nodejs/node/pull/xxx.patch | git am -3 --whitespace=fix

If the 3-way merge succeeds, check the results against the original pull request. Build and test on at least one platform before landing.

If the 3-way merge fails, then it is most likely that a conflicting pull request has landed since the CI run. You will have to ask the author to rebase.

Check and re-review the changes:

git diff upstream/main

Check the number of commits and commit messages:

git log upstream/main...main

Squash commits and add metadata:

git rebase -i upstream/main

This will open a screen like this (in the default shell editor):

pick 6928fc1 crypto: add feature A
pick 8120c4c add test for feature A
pick 51759dc crypto: feature B
pick 7d6f433 test for feature B

# Rebase f9456a2..7d6f433 onto f9456a2
#
# Commands:
#  p, pick = use commit
#  r, reword = use commit, but edit the commit message
#  e, edit = use commit, but stop for amending
#  s, squash = use commit, but meld into previous commit
#  f, fixup = like "squash", but discard this commit's log message
#  x, exec = run command (the rest of the line) using shell
#
# These lines can be re-ordered; they are executed from top to bottom.
#
# If you remove a line here THAT COMMIT WILL BE LOST.
#
# However, if you remove everything, the rebase will be aborted.
#
# Note that empty commits are commented out

Replace a couple of picks with fixup to squash them into a previous commit:

pick 6928fc1 crypto: add feature A
fixup 8120c4c add test for feature A
pick 51759dc crypto: feature B
fixup 7d6f433 test for feature B

Replace pick with reword to change the commit message:

reword 6928fc1 crypto: add feature A
fixup 8120c4c add test for feature A
reword 51759dc crypto: feature B
fixup 7d6f433 test for feature B

Save the file and close the editor. When prompted, enter a new commit message for that commit. This is an opportunity to fix commit messages.

  • The commit message text must conform to the commit message guidelines.

  • Change the original commit message to include metadata. (The git node metadata command can generate the metadata for you).

    • Required: A PR-URL: line that references the full GitHub URL of the pull request. This makes it easy to trace a commit back to the conversation that led up to that change.
    • Optional: A Fixes: X line, where X is the full GitHub URL for an issue. A commit message can include more than one Fixes: lines.
    • Optional: One or more Refs: lines referencing a URL for any relevant background.
    • Required: A Reviewed-By: Name <email> line for each collaborator who reviewed the change.
      • Useful for @mentions / contact list if something goes wrong in the pull request.
      • Protects against the assumption that GitHub will be around forever.

Other changes might have landed on main since the successful CI run. As a precaution, run tests (make -j4 test or vcbuild test).

Confirm that the commit message format is correct using core-validate-commit.

git rev-list upstream/main...HEAD | xargs core-validate-commit

Optional: For your own commits, force push the amended commit to the pull request branch. If your branch name is bugfix, then: git push --force-with-lease origin main:bugfix. Don't close the pull request. It will close after you push it upstream. It will have the purple merged status rather than the red closed status. If you close the pull request before GitHub adjusts its status, it will show up as a 0 commit pull request with no changed files. The order of operations is important. If you push upstream before you push to your branch, GitHub will close the issue with the red closed status.

Time to push it:

git push upstream main

Close the pull request with a "Landed in <commit hash>" comment. Even if your pull request shows the purple merged status, add the "Landed in <commit hash>..<commit hash>" comment if you added more than one commit.

Troubleshooting

Sometimes, when running git push upstream main, you might get an error message like this:

To https://github.com/nodejs/node
 ! [rejected]              main -> main (fetch first)
error: failed to push some refs to 'https://github.com/nodejs/node'
hint: Updates were rejected because the tip of your current branch is behind
hint: its remote counterpart. Integrate the remote changes (e.g.
hint: 'git pull ...') before pushing again.
hint: See the 'Note about fast-forwards' in 'git push --help' for details.

That means a commit has landed since your last rebase against upstream/main. To fix this, pull with rebase from upstream, run the tests again, and (if the tests pass) push again:

git pull upstream main --rebase
make -j4 test
git push upstream main

I made a mistake

  • Ping a TSC voting member.
  • With git, there's a way to override remote trees by force pushing (git push -f). This is generally forbidden as it creates conflicts in other people's forks. It is permissible for simpler slip-ups such as typos in commit messages. You are only allowed to force push to any Node.js branch within 10 minutes from your original push. If someone else pushes to the branch or the 10-minute period passes, consider the commit final.
    • Use --force-with-lease to reduce the chance of overwriting someone else's change.

Long Term Support

What is LTS?

Long Term Support (LTS) guarantees 30-month support cycles for specific Node.js versions. You can find more information in the full release plan. Once a branch enters LTS, the release plan limits the types of changes permitted in the branch.

How are LTS branches managed?

Each LTS release has a corresponding branch (v10.x, v8.x, etc.). Each also has a corresponding staging branch (v10.x-staging, v8.x-staging, etc.).

Commits that land on main are cherry-picked to each staging branch as appropriate. If a change applies only to the LTS branch, open the pull request against the staging branch. Commits from the staging branch land on the LTS branch only when a release is being prepared. They might land on the LTS branch in a different order than they do in staging.

Only members of @nodejs/backporters should land commits onto LTS staging branches.

How can I help?

When you send your pull request, please state if your change is breaking. Also state if you think your patch is a good candidate for backporting. For more information on backporting, please see the backporting guide.

There are several LTS-related labels:

  • lts-watch- labels are for pull requests to consider for landing in staging branches. For example, lts-watch-v10.x would be for a change to consider for the v10.x-staging branch.

  • land-on- are for pull requests that should land in a future v*.x release. For example, land-on-v10.x would be for a change to land in Node.js 10.x.

Any collaborator can attach these labels to any pull request/issue. As commits land on the staging branches, the backporter removes the lts-watch- label. Likewise, as commits land in an LTS release, the releaser removes the land-on- label.

Attach the appropriate lts-watch- label to any pull request that might impact an LTS release.

Who to CC in the issue tracker

Subsystem Maintainers
benchmark/* @nodejs/benchmarking, @mscdex
doc/*, *.md @nodejs/documentation
lib/assert @nodejs/assert
lib/async_hooks @nodejs/async_hooks for bugs/reviews (+ @nodejs/diagnostics for API)
lib/buffer @nodejs/buffer
lib/child_process @nodejs/child_process
lib/cluster @nodejs/cluster
lib/{crypto,tls,https} @nodejs/crypto
lib/dgram @nodejs/dgram
lib/domains @nodejs/domains
lib/fs, src/{fs,file} @nodejs/fs
lib/{_}http{*} @nodejs/http
lib/inspector.js, src/inspector_* @nodejs/v8-inspector
lib/internal/bootstrap/* @nodejs/process
lib/internal/url, src/node_url @nodejs/url
lib/net @bnoordhuis, @indutny, @nodejs/streams
lib/repl @nodejs/repl
lib/{_}stream{*} @nodejs/streams
lib/timers @nodejs/timers
lib/util @nodejs/util
lib/zlib @nodejs/zlib
src/async_wrap.* @nodejs/async_hooks
src/node_api.* @nodejs/node-api
src/node_crypto.*, src/crypto @nodejs/crypto
test/* @nodejs/testing
tools/node_modules/eslint, .eslintrc @nodejs/linting
build @nodejs/build
src/module_wrap.*, lib/internal/modules/*, lib/internal/vm/module.js @nodejs/modules
GYP @nodejs/gyp
performance @nodejs/performance
platform specific @nodejs/platform-{aix,arm,freebsd,macos,ppc,smartos,s390,windows,windows-arm}
python code @nodejs/python
upgrading c-ares @rvagg
upgrading http-parser @nodejs/http, @nodejs/http2
upgrading libuv @nodejs/libuv
upgrading npm @nodejs/npm
upgrading V8 @nodejs/V8, @nodejs/post-mortem
Embedded use or delivery of Node.js @nodejs/delivery-channels

When things need extra attention, are controversial, or semver-major: @nodejs/tsc

If you cannot find who to cc for a file, git shortlog -n -s <file> can help.

Labels

General labels

  • confirmed-bug: Bugs you have verified
  • discuss: Things that need larger discussion
  • feature request: Any issue that requests a new feature
  • good first issue: Issues suitable for newcomers to fix
  • meta: Governance, policies, procedures, etc.
  • tsc-agenda: Open issues and pull requests with this label will be added to the Technical Steering Committee meeting agenda
  • author-ready - A pull request is author ready when:
    • There is a CI run in progress or completed.
    • There is at least one collaborator approval (or two TSC approvals for semver-major pull requests).
    • There are no outstanding review comments.

Please always add the author ready label to pull requests that qualify. Please always remove it again as soon as the conditions are not met anymore, such as if the CI run fails or a new outstanding review comment is posted.

  • semver-{minor,major}
    • be conservative – that is, if a change has the remote chance of breaking something, go for semver-major
    • when adding a semver label, add a comment explaining why you're adding it
    • minor vs. patch: roughly: "does it add a new method / does it add a new section to the docs"
    • major vs. everything else: run last versions tests against this version, if they pass, probably minor or patch

LTS/version labels

We use labels to keep track of which branches a commit should land on:

  • dont-land-on-v?.x
    • For changes that do not apply to a certain release line
    • Also used when the work of backporting a change outweighs the benefits
  • land-on-v?.x
    • Used by releasers to mark a pull request as scheduled for inclusion in an LTS release
    • Applied to the original pull request for clean cherry-picks, to the backport pull request otherwise
  • backport-requested-v?.x
    • Used to indicate that a pull request needs a manual backport to a branch in order to land the changes on that branch
    • Typically applied by a releaser when the pull request does not apply cleanly or it breaks the tests after applying
    • Will be replaced by either dont-land-on-v?.x or backported-to-v?.x
  • backported-to-v?.x
    • Applied to pull requests for which a backport pull request has been merged
  • lts-watch-v?.x
    • Applied to pull requests which the Release working group should consider including in an LTS release
    • Does not indicate that any specific action will be taken, but can be effective as messaging to non-collaborators
  • release-agenda
    • For things that need discussion by the Release working group
    • (for example semver-minor changes that need or should go into an LTS release)
  • v?.x
    • Automatically applied to changes that do not target main but rather the v?.x-staging branch

Once a release line enters maintenance mode, the corresponding labels do not need to be attached anymore, as only important bugfixes will be included.

Other labels

  • Operating system labels
    • macos, windows, smartos, aix
    • No linux label because it is the implied default
  • Architecture labels
    • arm, mips, s390, ppc
    • No x86{_64} label because it is the implied default