The file is written in YAML format, defined by the scheme described below. Brackets indicate that a parameter is optional. For non-list parameters the value is set to the specified default.
Generic placeholders are defined as follows:
<boolean>: a boolean that can take the valuestrueorfalse<int>: a regular integer<duration>: a duration matching the regular expression[0-9]+(ms|[smhdwy])<filename>: a valid path in the current working directory<string>: a regular string<secret>: a regular string that is a secret, such as a password<regex>: a regular expression
The other placeholders are specified separately.
# The protocol over which the probe will take place (http, tcp, dns, icmp).
prober: <prober_string>
# How long the probe will wait before giving up.
[ timeout: <duration> ]
# The specific probe configuration - at most one of these should be specified.
[ http: <http_probe> ]
[ tcp: <tcp_probe> ]
[ dns: <dns_probe> ]
[ icmp: <icmp_probe> ]
# Accepted status codes for this probe. Defaults to 2xx.
[ valid_status_codes: <int>, ... | default = 2xx ]
# Accepted HTTP versions for this probe.
[ valid_http_versions: <string>, ... ]
# The HTTP method the probe will use.
[ method: <string> | default = "GET" ]
# The HTTP headers set for the probe.
headers:
[ <string>: <string> ... ]
# The maximum uncompressed body length in bytes that will be processed. A value of 0 means no limit.
#
# If the response includes a Content-Length header, it is NOT validated against this value. This
# setting is only meant to limit the amount of data that you are willing to read from the server.
#
# Example: 10MB
[ body_size_limit: <size> | default = 0 ]
# The compression algorithm to use to decompress the response (gzip, br, deflate, identity).
#
# If an "Accept-Encoding" header is specified, it MUST be such that the compression algorithm
# indicated using this option is acceptable. For example, you can use `compression: gzip` and
# `Accept-Encoding: br, gzip` or `Accept-Encoding: br;q=1.0, gzip;q=0.9`. The fact that gzip is
# acceptable with a lower quality than br does not invalidate the configuration, as you might
# be testing that the server does not return br-encoded content even if it's requested. On the
# other hand, `compression: gzip` and `Accept-Encoding: br, identity` is NOT a valid
# configuration, because you are asking for gzip to NOT be returned, and trying to decompress
# whatever the server returns is likely going to fail.
[ compression: <string> | default = "" ]
# Whether or not the probe will follow any redirects.
[ follow_redirects: <boolean> | default = true ]
# Probe fails if SSL is present.
[ fail_if_ssl: <boolean> | default = false ]
# Probe fails if SSL is not present.
[ fail_if_not_ssl: <boolean> | default = false ]
# Probe fails if response body matches regex.
fail_if_body_matches_regexp:
[ - <regex>, ... ]
# Probe fails if response body does not match regex.
fail_if_body_not_matches_regexp:
[ - <regex>, ... ]
# Probe fails if response header matches regex. For headers with multiple values, fails if *at least one* matches.
fail_if_header_matches:
[ - <http_header_match_spec>, ... ]
# Probe fails if response header does not match regex. For headers with multiple values, fails if *none* match.
fail_if_header_not_matches:
[ - <http_header_match_spec>, ... ]
# Configuration for TLS protocol of HTTP probe.
tls_config:
[ <tls_config> ]
# The HTTP basic authentication credentials for the targets.
basic_auth:
[ username: <string> ]
[ password: <secret> ]
[ password_file: <filename> ]
# The bearer token for the targets.
[ bearer_token: <secret> ]
# The bearer token file for the targets.
[ bearer_token_file: <filename> ]
# HTTP proxy server to use to connect to the targets.
[ proxy_url: <string> ]
# OAuth 2.0 configuration to use to connect to the targets.
oauth2:
[ <oauth2> ]
# The IP protocol of the HTTP probe (ip4, ip6).
[ preferred_ip_protocol: <string> | default = "ip6" ]
[ ip_protocol_fallback: <boolean> | default = true ]
# The body of the HTTP request used in probe.
body: [ <string> ]
header: <string>,
regexp: <regex>,
[ allow_missing: <boolean> | default = false ]# The IP protocol of the TCP probe (ip4, ip6).
[ preferred_ip_protocol: <string> | default = "ip6" ]
[ ip_protocol_fallback: <boolean | default = true> ]
# The source IP address.
[ source_ip_address: <string> ]
# The query sent in the TCP probe and the expected associated response.
# starttls upgrades TCP connection to TLS.
query_response:
[ - [ [ expect: <string> ],
[ send: <string> ],
[ starttls: <boolean | default = false> ]
], ...
]
# Whether or not TLS is used when the connection is initiated.
[ tls: <boolean | default = false> ]
# Configuration for TLS protocol of TCP probe.
tls_config:
[ <tls_config> ]
# The IP protocol of the DNS probe (ip4, ip6).
[ preferred_ip_protocol: <string> | default = "ip6" ]
[ ip_protocol_fallback: <boolean | default = true> ]
# The source IP address.
[ source_ip_address: <string> ]
[ transport_protocol: <string> | default = "udp" ] # udp, tcp
# Whether to use DNS over TLS. This only works with TCP.
[ dns_over_tls: <boolean | default = false> ]
# Configuration for TLS protocol of DNS over TLS probe.
tls_config:
[ <tls_config> ]
query_name: <string>
[ query_type: <string> | default = "ANY" ]
[ query_class: <string> | default = "IN" ]
# List of valid response codes.
valid_rcodes:
[ - <string> ... | default = "NOERROR" ]
validate_answer_rrs:
fail_if_matches_regexp:
[ - <regex>, ... ]
fail_if_all_match_regexp:
[ - <regex>, ... ]
fail_if_not_matches_regexp:
[ - <regex>, ... ]
fail_if_none_matches_regexp:
[ - <regex>, ... ]
validate_authority_rrs:
fail_if_matches_regexp:
[ - <regex>, ... ]
fail_if_all_match_regexp:
[ - <regex>, ... ]
fail_if_not_matches_regexp:
[ - <regex>, ... ]
fail_if_none_matches_regexp:
[ - <regex>, ... ]
validate_additional_rrs:
fail_if_matches_regexp:
[ - <regex>, ... ]
fail_if_all_match_regexp:
[ - <regex>, ... ]
fail_if_not_matches_regexp:
[ - <regex>, ... ]
fail_if_none_matches_regexp:
[ - <regex>, ... ]
# The IP protocol of the ICMP probe (ip4, ip6).
[ preferred_ip_protocol: <string> | default = "ip6" ]
[ ip_protocol_fallback: <boolean | default = true> ]
# The source IP address.
[ source_ip_address: <string> ]
# Set the DF-bit in the IP-header. Only works with ip4, on *nix systems and
# requires raw sockets (i.e. root or CAP_NET_RAW on Linux).
[ dont_fragment: <boolean> | default = false ]
# The size of the payload.
[ payload_size: <int> ]
# Disable target certificate validation.
[ insecure_skip_verify: <boolean> | default = false ]
# The CA cert to use for the targets.
[ ca_file: <filename> ]
# The client cert file for the targets.
[ cert_file: <filename> ]
# The client key file for the targets.
[ key_file: <filename> ]
# Used to verify the hostname for the targets.
[ server_name: <string> ]
OAuth 2.0 authentication using the client credentials grant type. Blackbox exporter fetches an access token from the specified endpoint with the given client access and secret keys.
NOTE: This is experimental in the blackbox exporter and might not be reflected properly in the probe metrics at the moment.
client_id: <string>
[ client_secret: <secret> ]
# Read the client secret from a file.
# It is mutually exclusive with `client_secret`.
[ client_secret_file: <filename> ]
# Scopes for the token request.
scopes:
[ - <string> ... ]
# The URL to fetch the token from.
token_url: <string>
# Optional parameters to append to the token URL.
endpoint_params:
[ <string>: <string> ... ]