WPA2/3 Enterprise (802.1x) Support in Tasmota - ESP32

[victorhooi]

PROBLEM DESCRIPTION

Tasmota currently does not support WPA Enterprise (802.1x) wireless encryption, which makes it hard to setup Tasmota devices with such networks.

ESPHome added similar support a few years ago - is there something we can learn from their support?

esphome/feature-requests#35
esphome/esphome#1080
esphome/esphome-docs#633

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Shelly Dimmer 2, Sonoff Pow R2
• Tasmota binary firmware version number used: 11.0.0
  • Pre-compiled
  • Self-compiled
• Flashing tools used: Tasmotizer
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:
23:25:48.993 RSL: RESULT = {"NAME":"Generic","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1],"FLAG":0,"BASE":18}
23:25:49.242 RSL: RESULT = {"Module":{"43":"Sonoff Pow R2"}}
23:25:49.459 RSL: RESULT = {"GPIO0":{"32":"Button1"},"GPIO1":{"3072":"CSE7766 Tx"},"GPIO2":{"0":"None"},"GPIO3":{"3104":"CSE7766 Rx"},"GPIO4":{"0":"None"},"GPIO5":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"224":"Relay1"},"GPIO13":{"320":"Led_i1"},"GPIO14":{"0":"None"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"}}

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:
23:26:13.032 RSL: STATUS = {"Status":{"Module":43,"DeviceName":"Tasmota","FriendlyName":["Tasmota"],"Topic":"tasmota_B1DC57","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
23:26:13.036 RSL: STATUS1 = {"StatusPRM":{"Baudrate":4800,"SerialConfig":"8E1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota/release/tasmota.bin.gz","RestartReason":"Power On","Uptime":"4T13:53:18","StartupUTC":"2022-03-31T08:32:55","Sleep":50,"CfgHolder":4617,"BootCount":18,"BCResetTime":"2021-01-16T22:32:01","SaveCount":568,"SaveAddress":"F4000"}}
23:26:13.040 RSL: STATUS2 = {"StatusFWR":{"Version":"10.1.0(tasmota)","BuildDateTime":"2021-12-08T14:47:33","Boot":31,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"350/699"}}
23:26:13.044 RSL: STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["MIMO",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["00008009","2805C80001000680003C5A0A000000000000","00000080","00006000","00004000"]}}
23:26:13.053 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":616,"Free":384,"Heap":26,"ProgramFlashSize":1024,"FlashSize":4096,"FlashChipId":"1640EF","FlashFrequency":40,"FlashMode":3,"Features":["00000809","8FDAC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","00000020"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45","Sensors":"1,2,3,4,5,6"}}
23:26:13.058 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota-B1DC57-7255","IPAddress":"10.5.1.242","Gateway":"10.5.1.1","Subnetmask":"255.255.255.0","DNSServer1":"10.5.1.1","DNSServer2":"0.0.0.0","Mac":"84:F3:EB:B1:DC:57","Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
23:26:13.061 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_B1DC57","MqttUser":"DVES_USER","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
23:26:13.067 RSL: STATUS7 = {"StatusTIM":{"UTC":"2022-04-04T22:26:13","Local":"2022-04-04T23:26:13","StartDST":"2022-03-27T02:00:00","EndDST":"2022-10-30T03:00:00","Timezone":"+01:00","Sunrise":"06:21","Sunset":"19:24"}}
23:26:13.070 RSL: STATUS9 = {"StatusPTH":{"PowerDelta":[0,0,0],"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}
23:26:13.077 RSL: STATUS10 = {"StatusSNS":{"Time":"2022-04-04T23:26:13","ENERGY":{"TotalStartTime":"2021-01-16T22:32:01","Total":440.516,"Yesterday":2.582,"Today":3.968,"Power":304,"ApparentPower":351,"ReactivePower":175,"Factor":0.87,"Voltage":243,"Current":1.443}}}
23:26:13.083 RSL: STATUS11 = {"StatusSTS":{"Time":"2022-04-04T23:26:13","Uptime":"4T13:53:18","UptimeSec":395598,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"MIMO","BSSId":"00:4E:35:13:E2:80","Channel":11,"Mode":"11n","RSSI":90,"Signal":-55,"LinkCount":1,"Downtime":"0T00:00:06"}}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:
N/A

TO REPRODUCE

Attempt to connect a Tasmota device to a WPA Enterprise network.

EXPECTED BEHAVIOUR

Tasmota should be able to connect to an Enterprise wifi network.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

So there are very old Github issues dating back years, on WPA Enterprise support (e.g. #3777 and #745). At the time, they appeared to indicate that the limitation was an upstream one.

However, I noticed that ESPHome actually added WPA Enterprise support a couple of years ago:

esphome/feature-requests#35
esphome/esphome#1080
esphome/esphome-docs#633

Does this give any clues as to how Tasmota might be able to add WPA Enterprise support as well?

Are there technical issues that their approach wouldn't work here?

(Please, remember to close the issue when the problem has been addressed)

[ascillato]

Tasmota already supports WPA3 but only for ESP32 devices the same as ESPHome does.

The PR that have added WPA3 support in Tasmota is #13526 from 30 Oct 2021.

There is no support for WPA3 in ESP8266 devices due to Espressif SDK limitations. Sorry.
Espressif, the manufacturer of ESP8266 and ESP32 chips, releases a set of libraries called SDK in order to let any software to use the Wi-Fi radio. That SDK is closed source, so the bug-fixing and improvements for it are done by them only. The Arduino ESP8266 Core, in which Tasmota relies, uses the NonOs SDK type. As explained in the manufacturer site: https://docs.espressif.com/projects/espressif-esp-faq/en/latest/software-framework/wifi.html?highlight=wpa3#do-espressif-s-chips-support-wpa3, they supports WPA3 in ESP8266 but only if using the RTOS SDK. The Arduino ESP8266 Core don't support that SDK and moving from NonOS SDK to RTOS SDK is a huge task that is not going to be done by them any time soon.

Your devices, Shelly Dimmer 2 and Sonoff Pow R2, are ESP8266 based. So, in order to use WPA3 and Tasmota you need to move to ESP32 based devices like for example Shelly Plus 1 PM or Shelly Plus 2 PM.

[victorhooi]

@ascillato Thanks for replying!

However, I think there's a mixup - I'm referring to WPA2/WPA3 Enterprise specifically - i.e. using 802.1x authentication on wifi.

If we only support WPA2 Enterprise - that is fine - but it doesn't seem like that support is in Tasmota yet?

[ascillato]

Exactly, that is not supported in ESP8266 due to the SDK. In ESP32, the SDK and the Arduino core supports EAP but that part is not implemented in Tasmota. Anyway, if implemented, it would work only in ESP32 devices and not in the ones you listed.

Moving this to Ideas due to this is a Feature request for supporting WPA2/WPA3 EAP in ESP32. Thanks.

[Jason2866]

Since WPA Enterprise is only possible for ESP32 devices and Tasmotas goal is to support the main functions for alle ESPs it is not on the considered features list of the contributing main devs.
This does not mean, if a PR is provided, it has no chance to get merged.

[victorhooi]

@Jason2866 Do you have a source for the WPA Enterprise only being supported on ESP32 devices?

As far as I know, WPA Enterprise should work on both ESP32 and ESP8266 devices.

ESPHome added support for both devices in two separate PRs:

• Add ESP32 support for WPA2-EAP Enterprise WiFi authentication esphome/esphome#1080 - ESP32 Support
• Add support for WPA2-EAP enterprise WiFi to ESP8266s. esphome/esphome#1332 - ESP8266 Support

I also found examples for both devices in the Espressif SDK if that helps:

• https://github.com/espressif/arduino-esp32/blob/master/libraries/WiFi/examples/WiFiClientEnterprise/WiFiClientEnterprise.ino - ESP32
• https://github.com/espressif/ESP8266_NONOS_SDK/blob/release/v3.0.0/examples/wpa2_enterprise/user/user_main.c - ESP8266

(@ascillato mentioned ESP32 vs ESP8266 before - but I think that was due to him thinking this was about WPA2 vs WPA3 - not WPA Enterprise).

[ascillato]

Hi, yes, I understood you. That is why your issue was moved to a feature request.

ESP32: WPA2 and WPA3 is supported in Tasmota. WPA2 EAP and WPA3 EAP is supported in the SDK but not supported yet in Tasmota (hence this feature request)

ESP8266: WPA2 is supported in Tasmota, WPA3 is not supported in the SDK, hence WPA3 is not possible in ESP8266. WPA2 EAP is supported in the SDK but not in Tasmota (hence this feature request)

So, in summary, this feature request is:

Add support for WPA2 EAP for ESP8266 and ESP32
Add support for WPA3 EAP for ESP32 only

[Jason2866]

@victorhooi Arduino ESP8266 is NOT based on NONOS_SDK 3.0. It uses version 2.2.1.
Version 3.0 can not be used as base for Arduino ESP8266 without major changes in Arduino code.
So any reference of usage for a version newer NONOS_SDK 2.2.1 is useless since not compatible.
To be clear that is nothing we can change since NONOOS_SDK is closed source and is not anymore maintained from Espressif (EoL).
References to EspHome are useless too, since EspHome do not use Arduino (using IDF).

[Gvico]

Hello, I am taking the liberty to bump this post, to ask if there has been any update about the potential support of WPA Enterprise for Tasmota on ESP32.
From my understanding it should be technically possible, but I don't know if it is considered.

[Jason2866]

@Gvico There is a chance in not too far future. Some Background, Arduino core uses static compiled libs.
This libs are compiled with IDF. To have the possibility to support WPA Enterprise this feature needs to be enabled in IDF. BUT this needs always resources (Flash / RAM), even when not used and activated.
The impact is so big that it is disabled by default (despite the fact, Tasmota has no code for...).
To make it possible without littering all builds it needs individual compiled static libs.
That's a complete new way in the Build systems. I am working on this to enhance our Platformio fork to build the Arduino libs with IDF just before the Arduino compile run of Tasmota32. Yes, it is that complicated as it sounds.

[Gvico]

Sounds like a lot of work indeed.
That said, it would be great to have a system like that.
I look forward to seeing how it turns out.

[Gvico]

Hello, sorry for coming back again with this, but the company I work for (DVC-CO) is interested in using Tasmota with WPA Enterprise, and as such would like to know if there are any plans to add support for this feature in the coming weeks.
Given our reliance on Tasmota for this project, and the complexity of the required new build systems, we are also planning to make donations to support its development.
Thank you for your time

[Jason2866]

@Gvico I was heavily working on the underlying build systems to support individual sdkconfig settings for an Arduino Platformio [env]. With latest Platform merged 24.11.17 it is now possible to activate WPA Enterprise support individually for an Tasmota [env].
So now "only" the needed changes in Tasmota needs to be done ;-) @arendst

[arendst]

As I don't have WPA equipment I'm unable to add or play with it.

@Gvico as it is now released in the build chain of Tasmota I suggest you try to make it work the way you like.

[Jason2866]

@Gvico See #22474 how to setup an env to have WPA Enterprise support available in the used libs.
An Arduino example sketch https://github.com/espressif/arduino-esp32/tree/master/libraries/WiFi/examples/WiFiClientEnterprise

[Gvico]

Hello, thank you very much for your work!
I tried building the tasmota32-WPA3_SAE environment (without changing anything for now), but got an error.
Is there something else I must do?

C:/.../.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/STA.cpp:439:6: error: no declaration matches 'bool STAClass::connect(const char*, wpa2_auth_method_t, const char*, const char*, const char*, const char*, const char*, const char*, int, int32_t, const uint8_t*, bool)'
  439 | bool STAClass::connect(
      |      ^~~~~~~~
In file included from C:/.../.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/WiFi.h:34,
                 from C:/.../.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/STA.cpp:6:
C:/.../.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/WiFiSTA.h:56:8: note: candidates are: 'bool STAClass::connect(const char*, wpa2_auth_method_t, const char*, const char*, const char*, const char*, const char*, const char*, int32_t, const uint8_t*, bool)'
   56 |   bool connect(
      |        ^~~~~~~
C:/.../.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/STA.cpp:359:6:Compiling .pio\build\tasmota32-WPA3_SAE\lwip\lwip\src\api\netifapi.c.o
 note:                 'bool STAClass::connect(const char*, const char*, int32_t, const uint8_t*, bool)'
  359 | bool STAClass::connect(const char *ssid, const char *passphrase, int32_t channel, const uint8_t *bssid, bool tryConnect) {
      |      ^~~~~~~~
C:/.../.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/STA.cpp:319:6: note:                 'bool STAClass::connect()'
  319 | bool STAClass::connect() {
      |      ^~~~~~~~
C:/.../.platformio/packages/framework-arduinoespressif32/libraries/WiFi/src/WiFiSTA.h:44:7: note: 'class STAClass' defined here
   44 | class STAClass : public NetworkInterface {
      |       ^~~~~~~~
Compiling .pio\build\tasmota32-WPA3_SAE\lwip\lwip\src\api\sockets.c.o
*** [.pio\build\tasmota32-WPA3_SAE\STA.cpp.o] Error 1
Compiling .pio\build\tasmota32-WPA3_SAE\lwip\lwip\src\api\tcpip.c.o

[Jason2866]

@Gvico Tested does compile successfully. You have to use latest branch development.
Probably your build system is littered. Do a fresh clone of Tasmota. Close VSC. Delete the hidden folder .platformio with everything in it. Start VSC and let everything reinstall. After that compile the env.

[Gvico]

I did that and now it works, thank you :)
I'll try and see if I can get Tasmota to connect to our WPA Enterprise network.

[dvc-co]

Hi, I did some modifications to try connecting to our network, (for now a very crude implementation, replacing WiFiHelper::begin() calls in support_wifi.ino) but the compilation fails, complaining about missing references to mbedtls_ssl.
I searched around and the only references I found about it was comments mentioning it was replaced by BearSSL.

Is there something that works differently when using WPA Enterprise connection, and that requires mbedtls_ssl?
If so, how can I enable it?

C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_mbedtls_cleanup$part$0+0x0): undefined reference to `mbedtls_ssl_config_free'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_mbedtls_cleanup$part$0+0x4): undefined reference to `mbedtls_ssl_free'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_handshake+0x0): undefined reference to `mbedtls_ssl_handshake_step'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_encrypt+0x0): undefined reference to `mbedtls_ssl_write'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_decrypt+0x0): undefined reference to `mbedtls_ssl_read'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_get_version+0x0): undefined reference to `mbedtls_ssl_get_version'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_get_cipher+0x0): undefined reference to `mbedtls_ssl_get_ciphersuite'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x20): undefined reference to `mbedtls_ssl_init'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x24): undefined reference to `mbedtls_ssl_config_init'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x28): undefined reference to `mbedtls_ssl_config_defaults'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x2c): undefined reference to `mbedtls_ssl_conf_cert_profile'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x30): undefined reference to `mbedtls_ssl_conf_sig_algs'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x34): undefined reference to `mbedtls_ssl_conf_authmode'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x38): undefined reference to `mbedtls_ssl_conf_ca_chain'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x3c): undefined reference to `mbedtls_ssl_conf_ciphersuites'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x40): undefined reference to `mbedtls_ssl_conf_rng'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x44): undefined reference to `mbedtls_ssl_setup'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x48): undefined reference to `mbedtls_ssl_set_export_keys_cb'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x4c): undefined reference to `mbedtls_ssl_set_bio'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_set_params+0x54): undefined reference to `mbedtls_ssl_conf_own_cert'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_export_key+0x0): undefined reference to `mbedtls_ssl_tls_prf'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o):(.literal.tls_connection_shutdown+0x0): undefined reference to `mbedtls_ssl_session_reset'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_mbedtls_cleanup':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:108:(.text.tls_mbedtls_cleanup$part$0+0x31): undefined reference to `mbedtls_ssl_config_free'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: /COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:110:(.text.tls_mbedtls_cleanup$part$0+0x41): undefined reference to `mbedtls_ssl_free'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_connection_handshake':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:780:(.text.tls_connection_handshake+0x22): undefined reference to `mbedtls_ssl_handshake_step'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_connection_encrypt':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:852:(.text.tls_connection_encrypt+0xd): undefined reference to `mbedtls_ssl_write'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_connection_decrypt':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:885:(.text.tls_connection_decrypt+0x48): undefined reference to `mbedtls_ssl_read'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_get_version':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:937:(.text.tls_get_version+0xe): undefined reference to `mbedtls_ssl_get_version'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_get_cipher':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:955:(.text.tls_get_cipher+0xb): undefined reference to `mbedtls_ssl_get_ciphersuite'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_create_mbedtls_handle':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:591:(.text.tls_connection_set_params+0x1d): undefined reference to `mbedtls_ssl_init'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: /COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:593:(.text.tls_connection_set_params+0x31): undefined reference to `mbedtls_ssl_config_init'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `set_client_config':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:484:(.text.tls_connection_set_params+0x4b): undefined reference to `mbedtls_ssl_config_defaults'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: /COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:488:(.text.tls_connection_set_params+0x5b): undefined reference to `mbedtls_ssl_conf_cert_profile'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_enable_sha1_config':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:391:(.text.tls_connection_set_params+0x66): undefined reference to `mbedtls_ssl_conf_sig_algs'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `set_ca_cert':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:203:(.text.tls_connection_set_params+0x96): undefined reference to `mbedtls_ssl_conf_authmode'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: /COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:208:(.text.tls_connection_set_params+0xa3): undefined reference to `mbedtls_ssl_conf_ca_chain'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_set_ciphersuite':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:466:(.text.tls_connection_set_params+0xbd): undefined reference to `mbedtls_ssl_conf_ciphersuites'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_create_mbedtls_handle':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:602:(.text.tls_connection_set_params+0xe9): undefined reference to `mbedtls_ssl_conf_rng'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: /COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:609:(.text.tls_connection_set_params+0xf3): undefined reference to `mbedtls_ssl_setup'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: /COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:617:(.text.tls_connection_set_params+0x105): undefined reference to `mbedtls_ssl_set_export_keys_cb'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_connection_set_params':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:1010:(.text.tls_connection_set_params+0x117): undefined reference to `mbedtls_ssl_set_bio'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: /COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:1011:(.text.tls_connection_set_params+0x12a): undefined reference to `mbedtls_ssl_conf_authmode'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `set_pki_context':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:182:(.text.tls_connection_set_params+0x196): undefined reference to `mbedtls_ssl_conf_own_cert'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_connection_prf':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:1085:(.text.tls_connection_export_key+0x75): undefined reference to `mbedtls_ssl_tls_prf'
C:/Users/gvico/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: C:/Users/gvico/.platformio/packages/framework-arduinoespressif32/tools/esp32-arduino-libs/esp32/lib\libwpa_supplicant.a(tls_mbedtls.c.o): in function `tls_connection_shutdown':
/COMPONENT_WPA_SUPPLICANT_DIR/esp_supplicant/src/crypto/tls_mbedtls.c:1187:(.text.tls_connection_shutdown+0x12): undefined reference to `mbedtls_ssl_session_reset'
collect2.exe: error: ld returned 1 exit status
*** [.pio\build\tasmota32-WPA3_SAE\firmware.elf] Error 1

[Jason2866]

@dvc-co You have to use Tasmota Hybrid Compile mode. See #22474 So to use WPA Enterprise you have to use the env tasmota32-WPA3_SAE The sdkconfig used for standard Tasmota framework is here https://github.com/Jason2866/esp32-arduino-lib-builder/blob/v5.3_Arduino/configs/defconfig.common
You have to activate the needed mbedtls ciphers for WPA2/3 Enterprise in custom_sdkconfig
Currently most ciphers for mbedtls are switched off.
If you upload your PoC to github i will have a look
You can have a look here https://github.com/espressif/esp32-arduino-libs/blob/1a029d52a9cbc5863b00d0316124d79be1de2922/esp32/sdkconfig#L1756-L1890
what settings are probably needed and working

[dvc-co]

I have forked the repo and uploaded my changes here: https://github.com/dvc-co/Tasmota/tree/wpa_enterprise
For now there are not a lot of things: a temporary (dirty) call to WiFiHelper::begin() with harcoded credentials in order to check if compiles/works, and the new env (which I use to compile) with WPA3 and mbedTLS.
Currently the mbedTLS config is copy-pasted from the link you provided, I have tinkered with some parameters before committing but got the same error each time.

I will continue looking around and update if I find something.