You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have searched both the existing open issues & recently closed issues and did not find a duplicate of this issue.
Version of the Tesla component
3.24.1
Version of the Powerwall Gateway software
24.28.1 89040f18
Model
2x PW3
Current Behavior
I changed the polling time to 30 seconds to get more useful readings for my PW3 + solar setup. No car.
Sensor values for grid power, battery power etc. never change in Home Assistant, they retain the values pulled during initial integration reload. The only other way to update them is to manually reload the integration.
From the debug logs, I can see that polling is successful every 10 seconds with the values in logs continuously changing. But this is never reflected in Home Assistant.
I waited for more than 13 minutes (to get over the default 660 polling interval), but the sensors are still not updated.
![2024-08-15_22-56_1]
I can verify that sending commands to Tesla works fine. For example I can switch between self-powered and time-based and the changes are reflected in the Tesla app. Conversely if I change the same settings in the Tesla app, I see them reflected in Home Assistant. It's just the other sensors that don't update.
Is there an existing issue for this?
Version of the Tesla component
3.24.1
Version of the Powerwall Gateway software
24.28.1 89040f18
Model
2x PW3
Current Behavior
I changed the polling time to 30 seconds to get more useful readings for my PW3 + solar setup. No car.
Sensor values for grid power, battery power etc. never change in Home Assistant, they retain the values pulled during initial integration reload. The only other way to update them is to manually reload the integration.
(https://github.com/user-attachments/assets/5eae37ed-c57e-45fd-935b-6eb04aeaf470)
From the debug logs, I can see that polling is successful every 10 seconds with the values in logs continuously changing. But this is never reflected in Home Assistant.
I waited for more than 13 minutes (to get over the default 660 polling interval), but the sensors are still not updated.
![2024-08-15_22-56_1]
Expected Behavior
Sensor states are updated.
Debug logs
Anything else?
No response
The text was updated successfully, but these errors were encountered: