Skip to content

Latest commit

 

History

History
26 lines (16 loc) · 900 Bytes

README.md

File metadata and controls

26 lines (16 loc) · 900 Bytes
Raw

NES-ProtoCart

A quick and dirty PCB for prototyping NES cartridge hardware on

Recommended PCB specs:

  • 2 layers

  • 99mmx137mm

  • 1.2mm thickness

  • ENIG surface finish (ENIG will last longer and will be better in the long run, but is more expensive. You could get away with HASL if necessary)

  • And any color you want!

NOTE:

Due to board length this will NOT fit in a front loading NES unless you are using a replacement connector like the Blinking Light Win, I will be doing a more compact version with less working area that will fit, but this one will not. This project does not require any parts, simply upload the Gerbers.zip file in the releases section to your preferred board house website and order PCBs with the recommended specs.

Board Front

License:

Licensed under the TAPR Open Hardware License (www.tapr.org/OHL)

©Redherring32 2020