✨ FAN_KICKSTART_POWER / Controller fan kickstart

MarlinFirmware/Marlin#24873
MarlinFirmware · Oct 20, 2022 · ea013cc · ea013cc
1 parent a6b1d76
commit ea013cc
Show file tree

Hide file tree

Showing 294 changed files with 2,373 additions and 1,183 deletions.
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+#define FAN_KICKSTART_TIME    100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1

diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h
@@ -552,10 +552,14 @@
   #endif
 #endif
 
-// When first starting the main fan, run it at full speed for the
-// given number of milliseconds.  This gets the fan spinning reliably
-// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+/**
+ * Fan Kickstart
+ * When part cooling or controller fans first start, run at a speed that
+ * gets it spinning reliably for a short time before setting the requested speed.
+ * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
+ */
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1