✨ EDITABLE_STEPS_PER_UNIT

MarlinFirmware/Marlin#26615 Co-Authored-By: plampix <[email protected]>
MarlinFirmware · Jan 4, 2024 · b2ebd74 · b2ebd74
1 parent 7f1571e
commit b2ebd74
Show file tree

Hide file tree

Showing 355 changed files with 2,127 additions and 357 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 79.9738621, 80.2429911, 399.7264854 , 99.4696994 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 400, 94 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1311,11 +1311,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -1312,11 +1312,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 98 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 160.6 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1243,11 +1243,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 200, 355 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 95  }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 95  }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
@@ -1243,12 +1243,17 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT     { 100, 100, 400, 95 }
 //#define DEFAULT_AXIS_STEPS_PER_UNIT   {  80,  80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
@@ -1245,11 +1245,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95.5 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h
@@ -1244,11 +1244,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 100, 100, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 403.1, 100.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 403.1, 100.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/ET4/Configuration.h b/config/examples/Anet/ET4/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 403.1, 100.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/ET4X/Configuration.h b/config/examples/Anet/ET4X/Configuration.h
@@ -1248,11 +1248,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80.4, 80.4, 403.1, 100.7 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203

diff --git a/config/examples/Anet/ET5-Pro/Configuration.h b/config/examples/Anet/ET5-Pro/Configuration.h
@@ -1242,11 +1242,16 @@
 
 /**
  * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
  *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
  */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 100 }
 
+/**
+ * Enable support for M92. Disable to save ~530 bytes of flash (1400 more if using a display)
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
  * Default Max Feed Rate (linear=mm/s, rotational=°/s)
  * Override with M203