Zemismart ZMR4 and Zigbee2MQTT

[luks017]

Hi Everyone,

Need to preface this with I am fairly new to Z2M.

I have purchased a couple Zemismart ZMR4 wireless switches and can’t seem to get them to work. Z2M showing these as compatible but under a different model identifier: https://www.zigbee2mqtt.io/devices/ZMR4.html

The model of my switches is: _TZ3000_et7afzxz and not ‘_TZ3000_11pg3ima’ as defined in the Herdsman Converters.

Any help would be extremely appreciated.

[Koenkk]

Added!

Changes will be available in the dev branch in a few hours from now.

[vanderfran]

Running on docker

With this versions :

• Zigbee2MQTT version -> 1.39.1-dev commit: 65b1e60
• Coordinator type -> zStack3x0
• Coordinator revision -> 20230507
• Frontend version -> 0.7.4
• zigbee-herdsman-converters version - > 20.8.0
• zigbee-herdsman version -> 0.57.0

It got recognized as supported but only expose:

• Battery and
• Linkquality

For action I have null a interesting popup why moreover

There are no errors or warnings on the logs, but here is a payload sample:

info 2024-08-30 21:39:57z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/Office Switch', payload '{"action":null,"battery":100,"device":{"applicationVersion":80,"dateCode":"","friendlyName":"Office Switch","hardwareVersion":1,"ieeeAddr":"0x28dba7fffea60434","manufacturerID":4098,"manufacturerName":"_TZ3000_et7afzxz","model":"ZMR4","networkAddress":52497,"powerSource":"Battery","stackVersion":0,"type":"EndDevice","zclVersion":3},"last_seen":"2024-08-30T21:39:57-04:00","linkquality":189}'

[rjhelmke]

I have 1.40.0 installed and I can add this device, but I am not getting any actions when I press any of the buttons. Should this be working? It does work with Tuya if I add it to a Zigbee Tuya hub.