Skip to content

Latest commit

 

History

History
22 lines (17 loc) · 1.09 KB

libuvc_installation.md

File metadata and controls

22 lines (17 loc) · 1.09 KB
Raw

LibUVC-backend installation

If kernel patching is not possible, or any steps during official installation.md fail, you should try libuvc-backend version of librealsense This method is not officially validated but can run on wider range of platforms including older / newer kernel version

This script requires internet connection. Please make sure network proxy settings are correct

  1. Make sure no RealSense device is connected
  2. Open the terminal, run:
$ wget https://github.com/IntelRealSense/librealsense/raw/master/scripts/libuvc_installation.sh
$ chmod +x ./libuvc_installation.sh
$ ./libuvc_installation.sh
  1. Wait until Librealsense script completed message is displayed (may take some time)
  2. Connect RealSense device
  3. Run rs-enumerate-devices from the terminal to verify the installation

At the moment, the script assumes Ubuntu 16 with graphic subsystem

If you encounter any problems or would like to extend the script to additional system, please let us know via a new GitHub issue