README-api.md

API

Start by loading the addon with require:

var OZW = require('openzwave-shared');

and then create a new instance of the addon:

var zwave = new OZW();

You can also pass in an optional object specifying any desired option overrides:

var zwave = new OZW({
	Logging: false,		// disable file logging (OZWLog.txt)
    ConsoleOutput: true // enable console logging
});

The default options are specified in config/options.xml. Please refer to the full list of OpenZWave options for all the available options. If, for instance, you're using security devices (e.g. door locks) then you should specify an encryption key.

The rest of the API is split into Functions and Events. Messages from the Z-Wave network are handled by EventEmitter, and you will need to listen for specific events to correctly map the network.

Functions

Connecting to the network:

// for Linux/Mac OSX
zwave.connect('/dev/ttyUSB0');  // connect to a USB ZWave controller
zwave.disconnect('dev/ttyUSB0');// disconnect from the current connection

// for Windows, COM port #x notation is \\.\COMx
zwave.connect('\\\\.\\COM3');  // connect to a USB ZWave controller on COM3
zwave.disconnect('\\\\.\\COM3');// disconnect from the current connection on COM3

Important notice: the connect() call is asynchronous following the node/v8 javascript paradigm. This means that connect() will yield control to your script immediately, but the underlying OpenZWave C++ library will not be ready yet to accept commands. In fact, it can take some time (from a few seconds to a couple of minutes!) to scan the ZWave network and set up its data structures. So, be sure to register a "scan complete" callback, and after it gets called, you can safely start issuing commands to your ZWave devices.

Modifying device state:

/*
 * Set arbitrary values.
 */
// 1) by means of passing each individual ValueID constituent:
zwave.setValue(nodeid, commandclass, instance, index, value);
zwave.setValue(3,      37,           1,        0,     true); // node 3: turn on
zwave.setValue(3,      37,           1,        0,     false); // node 3: turn off
// dimmer node 5: set to 50%
zwave.setValue(5,      38,           1,        0,     50);
// 2) or by passing the valueID object (emitted by ValueAdded event):
zwave.setValue({ node_id:5, class_id: 38, instance:1, index:0}, 50);

/*
 * Turn a binary switch on/off.
 */
zwave.setNodeOn(3); // node 3: switch ON
zwave.setNodeOff(3);// node 3: switch OFF

/*
 * Set a multi-level device to the specified level (between 0-99).
 * See warning below
 */
zwave.setLevel(5, 50); // node 5: dim to 50%

WARNING: setNodeOn/Off/Level don't work reliably with all devices, as they are mere aliases to the BASIC command class. Not all devices support this. Please consult your device's manual to see if it supports this command class. The 'standard' way to control your devices is by setValue which is also the only way to control multi-instance devices, such as the Fibaro FGS-221 (double in-wall 2x1,5kw relay) for example:

zwave.setValue(8, 37, 1, 0, true); // node 8: turn on 1st relay
zwave.setValue(8, 37, 1, 0, false);// node 8: turn off 1st relay
zwave.setValue(8, 37, 2, 0, true); // node 8: turn on 2nd relay
zwave.setValue(8, 37, 2, 0, false);// node 8: turn off 2nd relay

Useful documentation on command classes can be found on MiCasaVerde website

Writing to device metadata (stored on the device itself):

zwave.setNodeLocation(nodeid, location);    // arbitrary location string
zwave.setNodeName(nodeid, name);            // arbitrary name string

Polling a device for changes (not all devices require this):

zwave.enablePoll(nodeid, commandclass, intensity);
zwave.disablePoll(nodeid, commandclass);
zwave.setPollInterval(nodeid, )
zwave.getPollInterval();
zwave.isPolled();
zwave.setPollIntensity();
zwave.getPollIntensity();

Association groups management:

zwave.getNumGroups(nodeid);
zwave.getGroupLabel(nodeid, group);
zwave.getAssociations(nodeid, group);
zwave.getMaxAssociations(nodeid, group);
zwave.addAssociation(nodeid, group, target_nodeid);
zwave.removeAssociation(nodeid, group, target_nodeid);

Resetting the controller. Calling hardReset will clear any associations, so use carefully:

zwave.hardReset();      // destructive! will wipe out all known configuration
zwave.softReset();      // non-destructive, just resets the chip

Scenes control:

zwave.createScene(label); 	// create a scene and assign a label, return its numeric id.
zwave.removeScene(sceneId); // perform #GRExit
zwave.getScenes();			// get all scenes as an array
// add a zwave value to a scene
zwave.addSceneValue(sceneId, nodeId, commandclass, instance, index);
// remove a zwave value from a scene
zwave.removeSceneValue(sceneId, nodeId, commandclass, instance, index);
zwave.sceneGetValues(sceneId); // return array of values associated with this scene
zwave.activateScene(sceneId);  // The Show Must Go On...

ZWave network commands:

zwave.healNetworkNode(nodeId, doReturnRoutes=false);
zwave.healNetwork();   // guru meditation
zwave.getNeighbors();
zwave.refreshNodeInfo(nodeid);

ZWave controller commands:

// begin an async controller command on node1:
zwave.beginControllerCommand( "command name", highPower = false, node1_id, node2_id = null);  
// cancel controller command in progress
zwave.cancelControllerCommand();
// returns controller's node id
zwave.getControllerNodeId();
// returns static update controller node id
zwave.getSUCNodeId();
// is the OZW-managed controller the primary controller for this zwave network?
zwave.isPrimaryController();
// Query if the controller is a static update controller.
zwave.isStaticUpdateController();
// Query if the controller is using the bridge controller library.
zwave.isBridgeController();
// Get the version of the Z-Wave API library used by a controller.
zwave.getLibraryVersion();
// Get a string containing the Z-Wave API library type used by a controller
zwave.getLibraryTypeName();
//
zwave.getSendQueueCount();

Configuration commands:

zwave.requestAllConfigParams(nodeId);
zwave.requestConfigParam(nodeId, paramId);
zwave.setConfigParam(nodeId, paramId, paramValue, <sizeof paramValue>);