Skip to content

Latest commit

 

History

History
62 lines (34 loc) · 1.64 KB

README.md

File metadata and controls

62 lines (34 loc) · 1.64 KB
Raw

Custom 3D Printer

A custom RepRap FDM 3D printer.

⚠️ Still under active development: Parts and documentation will change!

V1.0

The first version is more like a proof of concept designed and made out of mostly scraped metal over the course of 3 month and took 2 month of tweaking and configuring, however it is fully functional and practical but there is more to enhance and improve.

Specification

  • build volume: 580mm x 485mm x 450mm

  • 4 x TB6600HG Step Motor Driver NEMA23

  • 4 x PHB57S 1.8 degree NEMA23 Stepper Motors (X,Y,Z)

  • Arduino Mega 2560CH460

  • Ramps 1.6

  • lead screw 10x2

  • MK8 Extruder

  • DRV8825 Step Motor Driver NEMA17

  • 2 x Opto Endstop and 1 x Mec Endstop

  • MK3 HeatBed

  • 12v and 24v power supply

Firmware

Printer uses Marlin 2.0x firmware running on a Arduino Mega. The configuration changes have been applied into the configuration.h file and slic3r configs, you can find all configs in the config folder.

To control the machine and to stream the G-Code, Repetier-Host and slic3r has been used.

Hardware Documentation

Schematic and PCB Layout

Building InstructionsBuilding Instructions

will make a build process for enhanced and better version.

Printed Parts

License

CERN Open Hardware Licence version 2