diff --git a/common/docs/Automatic_Capsule_Update_guide.md b/common/docs/Automatic_Capsule_Update_guide.md
new file mode 100644
index 0000000..14f4d4b
--- /dev/null
+++ b/common/docs/Automatic_Capsule_Update_guide.md
@@ -0,0 +1,46 @@
+## Table of Contents
+
+- [Introduction](#introduction)
+- [Prerequisites](#prerequisites)
+- [Automatic Capsule update flow](#flow)
+
+
+## Introduction
+
+Capsule update is the standard interface to update the firmware. The SystemReady devicetree ACS image provides automatic capsule update testing as part of ACS automation run.
+
+## Prerequisites
+1. Copy the platform’s three capsule files (unauth.bin, tampered.bin and signed_capsule.bin) which were generated using Generate capsule steps
+  mentioned in the IR guide into the BOOT partition /acs_tests/app/ path of the ACS image on a storage drive.
+
+2. Boot the ACS image on the platform with the new.dtb file which was generated in Generate
+  capsule files.
+
+## Automatic Capsule update flow
+1. Select bbr/bsa from the GRUB boot menu and press Enter. This is the default selection and will run automatically if no other option is chosen.
+
+2. First, the UEFI-based tests, including SCT, BSA, and the Ethernet port test, will run. After these tests complete, ACS will automatically boot to Linux.
+
+3. In Linux, the FWTS, BSA, and MVP tests will be executed. The image will automatically detect if a capsule update test is required and will reboot to perform the testing.
+
+4. After rebooting to the UEFI shell, SCT and BSA tests will be skipped, as they were already completed in the first run.
+
+5. User input will be requested to proceed with the capsule update, with a 10-second timeout.
+
+6. If the user presses any key within 10 seconds, `capsule.efi` will perform the on-disk capsule update test. If the user does not press any key and ACS determines that capsule testing is needed,
+    it will proceed with the test. However, a prompt will be provided, allowing the user to skip the capsule update test if desired.
+
+7. Before firmware update, script captures ESRT and SMBIOS tables for firmware update versions into \acs_results\app_output path.
+
+8. As part of firmware update, first the update with unauth.bin and tampered.bin will be done, then update with signed_capsule.bin will be performed.
+    > FS0:\acs_tests\app\CapsuleApp.efi   FS0:\acs_tests\app\unauth.bin
+    
+    > FS0:\acs_tests\app\CapsuleApp.efi   FS0:\acs_tests\app\tampered.bin
+    
+    > FS0:\acs_tests\app\CapsuleApp.efi   FS0:\acs_tests\app\ signed_capsule.bin -OD
+
+9. If the update with `signed_capsule.bin` is successful, the system will automatically reset for the firmware update. In case of failure, ACS will boot to Linux with a failure acknowledgment.
+
+10. On reboot after firmware update, script captures ESRT and SMBIOS tables for firmware update versions into \acs_results\app_output path and then it boots to Linux with success acknowledgement.
+
+11. In Linux, a message will be logged indicating whether the capsule update was successful or not, based on the uefi capsule update status.